summaryrefslogtreecommitdiff
path: root/drivers/bcma
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2011-07-23 01:20:10 +0200
committerJohn W. Linville <linville@tuxdriver.com>2011-08-08 14:29:28 -0400
commite3afe0e5be7576ac1282ea9fbbc9b352bb379227 (patch)
tree0b74e8bd5e45b2d50f9fa2033674a00aeac5f6ae /drivers/bcma
parent21e0534ad7415559bb8dee0dc00e39646fed83c9 (diff)
downloadlinux-3.10-e3afe0e5be7576ac1282ea9fbbc9b352bb379227.tar.gz
linux-3.10-e3afe0e5be7576ac1282ea9fbbc9b352bb379227.tar.bz2
linux-3.10-e3afe0e5be7576ac1282ea9fbbc9b352bb379227.zip
bcma: add serial console support
This adds support for serial console to bcma, when operating on an SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/bcma')
-rw-r--r--drivers/bcma/bcma_private.h8
-rw-r--r--drivers/bcma/driver_chipcommon.c48
-rw-r--r--drivers/bcma/driver_chipcommon_pmu.c26
-rw-r--r--drivers/bcma/driver_mips.c1
4 files changed, 83 insertions, 0 deletions
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index b97633d0d23..22d3052e190 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -29,6 +29,14 @@ void bcma_init_bus(struct bcma_bus *bus);
/* sprom.c */
int bcma_sprom_get(struct bcma_bus *bus);
+/* driver_chipcommon.c */
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+/* driver_chipcommon_pmu.c */
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+
#ifdef CONFIG_BCMA_HOST_PCI
/* host_pci.c */
extern int __init bcma_host_pci_init(void);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index acca327db3d..47cce9d6963 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -106,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
{
return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
}
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+{
+ unsigned int irq;
+ u32 baud_base;
+ u32 i;
+ unsigned int ccrev = cc->core->id.rev;
+ struct bcma_serial_port *ports = cc->serial_ports;
+
+ if (ccrev >= 11 && ccrev != 15) {
+ /* Fixed ALP clock */
+ baud_base = bcma_pmu_alp_clock(cc);
+ if (ccrev >= 21) {
+ /* Turn off UART clock before switching clocksource. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+ bcma_cc_read32(cc, BCMA_CC_CORECTL)
+ & ~BCMA_CC_CORECTL_UARTCLKEN);
+ }
+ /* Set the override bit so we don't divide it */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+ bcma_cc_read32(cc, BCMA_CC_CORECTL)
+ | BCMA_CC_CORECTL_UARTCLK0);
+ if (ccrev >= 21) {
+ /* Re-enable the UART clock. */
+ bcma_cc_write32(cc, BCMA_CC_CORECTL,
+ bcma_cc_read32(cc, BCMA_CC_CORECTL)
+ | BCMA_CC_CORECTL_UARTCLKEN);
+ }
+ } else {
+ pr_err("serial not supported on this device ccrev: 0x%x\n",
+ ccrev);
+ return;
+ }
+
+ irq = bcma_core_mips_irq(cc->core);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+ for (i = 0; i < cc->nr_serial_ports; i++) {
+ ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
+ (i * 256);
+ ports[i].irq = irq;
+ ports[i].baud_base = baud_base;
+ ports[i].reg_shift = 0;
+ }
+}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
index fcc63db0ce7..354caeea639 100644
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -136,3 +136,29 @@ void bcma_pmu_init(struct bcma_drv_cc *cc)
bcma_pmu_swreg_init(cc);
bcma_pmu_workarounds(cc);
}
+
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4716:
+ case 0x4748:
+ case 47162:
+ case 0x4313:
+ case 0x5357:
+ case 0x4749:
+ case 53572:
+ /* always 20Mhz */
+ return 20000 * 1000;
+ case 0x5356:
+ case 0x5300:
+ /* always 25Mhz */
+ return 25000 * 1000;
+ default:
+ pr_warn("No ALP clock specified for %04X device, "
+ "pmu rev. %d, using default %d Hz\n",
+ bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+ }
+ return BCMA_CC_PMU_ALP_CLOCK;
+}
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index 4b60c9f9583..b17233cb75c 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -238,6 +238,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore)
if (mcore->setup_done)
return;
+ bcma_chipco_serial_init(&bus->drv_cc);
bcma_core_mips_flash_detect(mcore);
mcore->setup_done = true;
}