Pull thinkpad into release branch

Conflicts:

	drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>

3 files changed, 0 insertions, 2836 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index e2ce4a9c1c9..45c43150826 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -218,43 +218,6 @@ config ACPI_ASUS
 	  NOTE: This driver is deprecated and will probably be removed soon,
 	  use asus-laptop instead.
 
-config ACPI_IBM
-	tristate "IBM ThinkPad Laptop Extras"
-	depends on X86
-	select BACKLIGHT_CLASS_DEVICE
-	---help---
-	  This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
-	  support for Fn-Fx key combinations, Bluetooth control, video
-	  output switching, ThinkLight control, UltraBay eject and more.
-	  For more information about this driver see <file:Documentation/ibm-acpi.txt>
-	  and <http://ibm-acpi.sf.net/> .
-
-	  If you have an IBM ThinkPad laptop, say Y or M here.
-
-config ACPI_IBM_DOCK
-	bool "Legacy Docking Station Support"
-	depends on ACPI_IBM
-	depends on ACPI_DOCK=n
-	default n
-	---help---
-	  Allows the ibm_acpi driver to handle docking station events.
-	  This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI.  It will
-	  allow locking and removing the laptop from the docking station,
-	  but will not properly connect PCI devices.
-
-	  If you are not sure, say N here.
-
-config ACPI_IBM_BAY
-	bool "Legacy Removable Bay Support"
-	depends on ACPI_IBM
-	default y
-	---help---
-	  Allows the ibm_acpi driver to handle removable bays.  It will allow
-	  disabling the device in the bay, and also generate notifications when
-	  the bay lever is ejected or inserted.
-
-	  If you are not sure, say Y here.
-
 config ACPI_TOSHIBA
 	tristate "Toshiba Laptop Extras"
 	depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5956e9f64a8..92642ab1545 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -55,7 +55,6 @@ obj-$(CONFIG_ACPI_SYSTEM)	+= system.o event.o
 obj-$(CONFIG_ACPI_DEBUG)	+= debug.o
 obj-$(CONFIG_ACPI_NUMA)		+= numa.o
 obj-$(CONFIG_ACPI_ASUS)		+= asus_acpi.o
-obj-$(CONFIG_ACPI_IBM)		+= ibm_acpi.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
 obj-y				+= cm_sbs.o
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
deleted file mode 100644
index dc1096608f4..00000000000
--- a/drivers/acpi/ibm_acpi.c
+++ /dev/null
@@ -1,2798 +0,0 @@
-/*
- *  ibm_acpi.c - IBM ThinkPad ACPI Extras
- *
- *
- *  Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
- *  Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define IBM_VERSION "0.13"
-
-/*
- *  Changelog:
- *
- *  2006-11-22	0.13	new maintainer
- *  			changelog now lives in git commit history, and will
- *  			not be updated further in-file.
- *  
- *  2005-08-17  0.12	fix compilation on 2.6.13-rc kernels
- *  2005-03-17	0.11	support for 600e, 770x
- *			    thanks to Jamie Lentin <lentinj@dial.pipex.com>
- *			support for 770e, G41
- *			G40 and G41 don't have a thinklight
- *			temperatures no longer experimental
- *			experimental brightness control
- *			experimental volume control
- *			experimental fan enable/disable
- *  2005-01-16	0.10	fix module loading on R30, R31 
- *  2005-01-16	0.9	support for 570, R30, R31
- *			ultrabay support on A22p, A3x
- *			limit arg for cmos, led, beep, drop experimental status
- *			more capable led control on A21e, A22p, T20-22, X20
- *			experimental temperatures and fan speed
- *			experimental embedded controller register dump
- *			mark more functions as __init, drop incorrect __exit
- *			use MODULE_VERSION
- *			    thanks to Henrik Brix Andersen <brix@gentoo.org>
- *			fix parameter passing on module loading
- *			    thanks to Rusty Russell <rusty@rustcorp.com.au>
- *			    thanks to Jim Radford <radford@blackbean.org>
- *  2004-11-08	0.8	fix init error case, don't return from a macro
- *			    thanks to Chris Wright <chrisw@osdl.org>
- *  2004-10-23	0.7	fix module loading on A21e, A22p, T20, T21, X20
- *			fix led control on A21e
- *  2004-10-19	0.6	use acpi_bus_register_driver() to claim HKEY device
- *  2004-10-18	0.5	thinklight support on A21e, G40, R32, T20, T21, X20
- *			proc file format changed
- *			video_switch command
- *			experimental cmos control
- *			experimental led control
- *			experimental acpi sounds
- *  2004-09-16	0.4	support for module parameters
- *			hotkey mask can be prefixed by 0x
- *			video output switching
- *			video expansion control
- *			ultrabay eject support
- *			removed lcd brightness/on/off control, didn't work
- *  2004-08-17	0.3	support for R40
- *			lcd off, brightness control
- *			thinklight on/off
- *  2004-08-14	0.2	support for T series, X20
- *			bluetooth enable/disable
- *			hotkey events disabled by default
- *			removed fan control, currently useless
- *  2004-08-09	0.1	initial release, support for X series
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <linux/fb.h>
-#include <asm/uaccess.h>
-
-#include <linux/dmi.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-
-#include <acpi/acpi_drivers.h>
-#include <acpi/acnamesp.h>
-
-#define IBM_NAME "ibm"
-#define IBM_DESC "IBM ThinkPad ACPI Extras"
-#define IBM_FILE "ibm_acpi"
-#define IBM_URL "http://ibm-acpi.sf.net/"
-
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
-MODULE_DESCRIPTION(IBM_DESC);
-MODULE_VERSION(IBM_VERSION);
-MODULE_LICENSE("GPL");
-
-#define IBM_DIR IBM_NAME
-
-#define IBM_LOG IBM_FILE ": "
-#define IBM_ERR	   KERN_ERR    IBM_LOG
-#define IBM_NOTICE KERN_NOTICE IBM_LOG
-#define IBM_INFO   KERN_INFO   IBM_LOG
-#define IBM_DEBUG  KERN_DEBUG  IBM_LOG
-
-#define IBM_MAX_ACPI_ARGS 3
-
-#define __unused __attribute__ ((unused))
-
-static int experimental;
-module_param(experimental, int, 0);
-
-static acpi_handle root_handle = NULL;
-
-#define IBM_HANDLE(object, parent, paths...)			\
-	static acpi_handle  object##_handle;			\
-	static acpi_handle *object##_parent = &parent##_handle;	\
-	static char        *object##_path;			\
-	static char        *object##_paths[] = { paths }
-
-IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0",	/* 240, 240x */
-	   "\\_SB.PCI.ISA.EC",	/* 570 */
-	   "\\_SB.PCI0.ISA0.EC0",	/* 600e/x, 770e, 770x */
-	   "\\_SB.PCI0.ISA.EC",	/* A21e, A2xm/p, T20-22, X20-21 */
-	   "\\_SB.PCI0.AD4S.EC0",	/* i1400, R30 */
-	   "\\_SB.PCI0.ICH3.EC0",	/* R31 */
-	   "\\_SB.PCI0.LPC.EC",	/* all others */
-    );
-
-IBM_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA",	/* 570 */
-	   "\\_SB.PCI0.AGP0.VID0",	/* 600e/x, 770x */
-	   "\\_SB.PCI0.VID0",	/* 770e */
-	   "\\_SB.PCI0.VID",	/* A21e, G4x, R50e, X30, X40 */
-	   "\\_SB.PCI0.AGP.VID",	/* all others */
-    );				/* R30, R31 */
-
-IBM_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID");	/* G41 */
-
-IBM_HANDLE(cmos, root, "\\UCMS",	/* R50, R50e, R50p, R51, T4x, X31, X40 */
-	   "\\CMOS",		/* A3x, G4x, R32, T23, T30, X22-24, X30 */
-	   "\\CMS",		/* R40, R40e */
-    );				/* all others */
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_HANDLE(dock, root, "\\_SB.GDCK",	/* X30, X31, X40 */
-	   "\\_SB.PCI0.DOCK",	/* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
-	   "\\_SB.PCI0.PCI1.DOCK",	/* all others */
-	   "\\_SB.PCI.ISA.SLCE",	/* 570 */
-    );				/* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",	/* 570 */
-	   "\\_SB.PCI0.IDE0.IDES.IDSM",	/* 600e/x, 770e, 770x */
-	   "\\_SB.PCI0.SATA.SCND.MSTR",	/* T60, X60, Z60 */ 
-	   "\\_SB.PCI0.IDE0.SCND.MSTR",	/* all others */
-    );				/* A21e, R30, R31 */
-
-IBM_HANDLE(bay_ej, bay, "_EJ3",	/* 600e/x, A2xm/p, A3x */
-	   "_EJ0",		/* all others */
-    );				/* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-
-IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",	/* A3x, R32 */
-	   "\\_SB.PCI0.IDE0.IDEP.IDPS",	/* 600e/x, 770e, 770x */
-    );				/* all others */
-
-IBM_HANDLE(bay2_ej, bay2, "_EJ3",	/* 600e/x, 770e, A3x */
-	   "_EJ0",		/* 770x */
-    );				/* all others */
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-IBM_HANDLE(pci, root, "\\_SB.PCI");	/* 570 */
-
-IBM_HANDLE(hkey, ec, "\\_SB.HKEY",	/* 600e/x, 770e, 770x */
-	   "^HKEY",		/* R30, R31 */
-	   "HKEY",		/* all others */
-    );				/* 570 */
-
-IBM_HANDLE(lght, root, "\\LGHT");	/* A21e, A2xm/p, T20-22, X20-21 */
-IBM_HANDLE(ledb, ec, "LEDB");	/* G4x */
-
-IBM_HANDLE(led, ec, "SLED",	/* 570 */
-	   "SYSL",		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-	   "LED",		/* all others */
-    );				/* R30, R31 */
-
-IBM_HANDLE(beep, ec, "BEEP");	/* all except R30, R31 */
-IBM_HANDLE(ecrd, ec, "ECRD");	/* 570 */
-IBM_HANDLE(ecwr, ec, "ECWR");	/* 570 */
-IBM_HANDLE(fans, ec, "FANS");	/* X31, X40, X41 */
-
-IBM_HANDLE(gfan, ec, "GFAN",	/* 570 */
-	   "\\FSPD",		/* 600e/x, 770e, 770x */
-    );				/* all others */
-
-IBM_HANDLE(sfan, ec, "SFAN",	/* 570 */
-	   "JFNS",		/* 770x-JL */
-    );				/* all others */
-
-#define IBM_HKEY_HID	"IBM0068"
-#define IBM_PCI_HID	"PNP0A03"
-
-enum thermal_access_mode {
-	IBMACPI_THERMAL_NONE = 0,	/* No thermal support */
-	IBMACPI_THERMAL_ACPI_TMP07,	/* Use ACPI TMP0-7 */
-	IBMACPI_THERMAL_ACPI_UPDT,	/* Use ACPI TMP0-7 with UPDT */
-	IBMACPI_THERMAL_TPEC_8,		/* Use ACPI EC regs, 8 sensors */
-	IBMACPI_THERMAL_TPEC_16,	/* Use ACPI EC regs, 16 sensors */
-};
-
-#define IBMACPI_MAX_THERMAL_SENSORS 16	/* Max thermal sensors supported */
-struct ibm_thermal_sensors_struct {
-	s32 temp[IBMACPI_MAX_THERMAL_SENSORS];
-};
-
-/*
- * FAN ACCESS MODES
- *
- * IBMACPI_FAN_RD_ACPI_GFAN:
- * 	ACPI GFAN method: returns fan level
- *
- * 	see IBMACPI_FAN_WR_ACPI_SFAN
- * 	EC 0x2f not available if GFAN exists
- *
- * IBMACPI_FAN_WR_ACPI_SFAN:
- * 	ACPI SFAN method: sets fan level, 0 (stop) to 7 (max)
- *
- * 	EC 0x2f might be available *for reading*, but never for writing.
- *
- * IBMACPI_FAN_WR_TPEC:
- * 	ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported
- * 	on almost all ThinkPads
- *
- * 	Fan speed changes of any sort (including those caused by the
- * 	disengaged mode) are usually done slowly by the firmware as the
- * 	maximum ammount of fan duty cycle change per second seems to be
- * 	limited.
- *
- * 	Reading is not available if GFAN exists.
- * 	Writing is not available if SFAN exists.
- *
- * 	Bits
- *	 7	automatic mode engaged;
- *  		(default operation mode of the ThinkPad)
- * 		fan level is ignored in this mode.
- *	 6	disengage mode (takes precedence over bit 7);
- *		not available on all thinkpads.  May disable
- *		the tachometer, and speeds up fan to 100% duty-cycle,
- *		which speeds it up far above the standard RPM
- *		levels.  It is not impossible that it could cause
- *		hardware damage.
- *	5-3	unused in some models.  Extra bits for fan level
- *		in others, but still useless as all values above
- *		7 map to the same speed as level 7 in these models.
- *	2-0	fan level (0..7 usually)
- *			0x00 = stop
- * 			0x07 = max (set when temperatures critical)
- * 		Some ThinkPads may have other levels, see
- * 		IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
- *
- *	FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- *	boot. Apparently the EC does not intialize it, so unless ACPI DSDT
- *	does so, its initial value is meaningless (0x07).
- *
- *	For firmware bugs, refer to:
- *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * 	----
- *
- *	ThinkPad EC register 0x84 (LSB), 0x85 (MSB):
- *	Main fan tachometer reading (in RPM)
- *
- *	This register is present on all ThinkPads with a new-style EC, and
- *	it is known not to be present on the A21m/e, and T22, as there is
- *	something else in offset 0x84 according to the ACPI DSDT.  Other
- *	ThinkPads from this same time period (and earlier) probably lack the
- *	tachometer as well.
- *
- *	Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare
- *	was never fixed by IBM to report the EC firmware version string
- *	probably support the tachometer (like the early X models), so
- *	detecting it is quite hard.  We need more data to know for sure.
- *
- *	FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings
- *	might result.
- *
- *	FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this
- *	register is not invalidated in ThinkPads that disable tachometer
- *	readings.  Thus, the tachometer readings go stale.
- *
- *	For firmware bugs, refer to:
- *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
- *
- * IBMACPI_FAN_WR_ACPI_FANS:
- *	ThinkPad X31, X40, X41.  Not available in the X60.
- *
- *	FANS ACPI handle: takes three arguments: low speed, medium speed,
- *	high speed.  ACPI DSDT seems to map these three speeds to levels
- *	as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH
- *	(this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3")
- *
- * 	The speeds are stored on handles
- * 	(FANA:FAN9), (FANC:FANB), (FANE:FAND).
- *
- * 	There are three default speed sets, acessible as handles:
- * 	FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
- *
- * 	ACPI DSDT switches which set is in use depending on various
- * 	factors.
- *
- * 	IBMACPI_FAN_WR_TPEC is also available and should be used to
- * 	command the fan.  The X31/X40/X41 seems to have 8 fan levels,
- * 	but the ACPI tables just mention level 7.
- */
-
-enum fan_status_access_mode {
-	IBMACPI_FAN_NONE = 0,		/* No fan status or control */
-	IBMACPI_FAN_RD_ACPI_GFAN,	/* Use ACPI GFAN */
-	IBMACPI_FAN_RD_TPEC,		/* Use ACPI EC regs 0x2f, 0x84-0x85 */
-};
-
-enum fan_control_access_mode {
-	IBMACPI_FAN_WR_NONE = 0,	/* No fan control */
-	IBMACPI_FAN_WR_ACPI_SFAN,	/* Use ACPI SFAN */
-	IBMACPI_FAN_WR_TPEC,		/* Use ACPI EC reg 0x2f */
-	IBMACPI_FAN_WR_ACPI_FANS,	/* Use ACPI FANS and EC reg 0x2f */
-};
-
-enum fan_control_commands {
-	IBMACPI_FAN_CMD_SPEED 	= 0x0001,	/* speed command */
-	IBMACPI_FAN_CMD_LEVEL 	= 0x0002,	/* level command  */
-	IBMACPI_FAN_CMD_ENABLE	= 0x0004,	/* enable/disable cmd,
-						 * and also watchdog cmd */
-};
-
-enum {					/* Fan control constants */
-	fan_status_offset = 0x2f,	/* EC register 0x2f */
-	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
-					 * 0x84 must be read before 0x85 */
-
-	IBMACPI_FAN_EC_DISENGAGED 	= 0x40,	/* EC mode: tachometer
-						 * disengaged */
-	IBMACPI_FAN_EC_AUTO		= 0x80, /* EC mode: auto fan
-						 * control */
-};
-
-static char *ibm_thinkpad_ec_found = NULL;
-
-struct ibm_struct {
-	char *name;
-	char param[32];
-
-	char *hid;
-	struct acpi_driver *driver;
-
-	int (*init) (void);
-	int (*read) (char *);
-	int (*write) (char *);
-	void (*exit) (void);
-
-	void (*notify) (struct ibm_struct *, u32);
-	acpi_handle *handle;
-	int type;
-	struct acpi_device *device;
-
-	int driver_registered;
-	int proc_created;
-	int init_called;
-	int notify_installed;
-
-	int experimental;
-};
-
-static struct proc_dir_entry *proc_dir = NULL;
-
-static struct backlight_device *ibm_backlight_device = NULL;
-
-#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
-#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
-#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
-
-static int acpi_evalf(acpi_handle handle,
-		      void *res, char *method, char *fmt, ...)
-{
-	char *fmt0 = fmt;
-	struct acpi_object_list params;
-	union acpi_object in_objs[IBM_MAX_ACPI_ARGS];
-	struct acpi_buffer result, *resultp;
-	union acpi_object out_obj;
-	acpi_status status;
-	va_list ap;
-	char res_type;
-	int success;
-	int quiet;
-
-	if (!*fmt) {
-		printk(IBM_ERR "acpi_evalf() called with empty format\n");
-		return 0;
-	}
-
-	if (*fmt == 'q') {
-		quiet = 1;
-		fmt++;
-	} else
-		quiet = 0;
-
-	res_type = *(fmt++);
-
-	params.count = 0;
-	params.pointer = &in_objs[0];
-
-	va_start(ap, fmt);
-	while (*fmt) {
-		char c = *(fmt++);
-		switch (c) {
-		case 'd':	/* int */
-			in_objs[params.count].integer.value = va_arg(ap, int);
-			in_objs[params.count++].type = ACPI_TYPE_INTEGER;
-			break;
-			/* add more types as needed */
-		default:
-			printk(IBM_ERR "acpi_evalf() called "
-			       "with invalid format character '%c'\n", c);
-			return 0;
-		}
-	}
-	va_end(ap);
-
-	if (res_type != 'v') {
-		result.length = sizeof(out_obj);
-		result.pointer = &out_obj;
-		resultp = &result;
-	} else
-		resultp = NULL;
-
-	status = acpi_evaluate_object(handle, method, &params, resultp);
-
-	switch (res_type) {
-	case 'd':		/* int */
-		if (res)
-			*(int *)res = out_obj.integer.value;
-		success = status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER;
-		break;
-	case 'v':		/* void */
-		success = status == AE_OK;
-		break;
-		/* add more types as needed */
-	default:
-		printk(IBM_ERR "acpi_evalf() called "
-		       "with invalid format character '%c'\n", res_type);
-		return 0;
-	}
-
-	if (!success && !quiet)
-		printk(IBM_ERR "acpi_evalf(%s, %s, ...) failed: %d\n",
-		       method, fmt0, status);
-
-	return success;
-}
-
-static void __unused acpi_print_int(acpi_handle handle, char *method)
-{
-	int i;
-
-	if (acpi_evalf(handle, &i, method, "d"))
-		printk(IBM_INFO "%s = 0x%x\n", method, i);
-	else
-		printk(IBM_ERR "error calling %s\n", method);
-}
-
-static char *next_cmd(char **cmds)
-{
-	char *start = *cmds;
-	char *end;
-
-	while ((end = strchr(start, ',')) && end == start)
-		start = end + 1;
-
-	if (!end)
-		return NULL;
-
-	*end = 0;
-	*cmds = end + 1;
-	return start;
-}
-
-static int ibm_acpi_driver_init(void)
-{
-	printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
-	printk(IBM_INFO "%s\n", IBM_URL);
-
-	if (ibm_thinkpad_ec_found)
-		printk(IBM_INFO "ThinkPad EC firmware %s\n",
-		       ibm_thinkpad_ec_found);
-
-	return 0;
-}
-
-static int driver_read(char *p)
-{
-	int len = 0;
-
-	len += sprintf(p + len, "driver:\t\t%s\n", IBM_DESC);
-	len += sprintf(p + len, "version:\t%s\n", IBM_VERSION);
-
-	return len;
-}
-
-static int hotkey_supported;
-static int hotkey_mask_supported;
-static int hotkey_orig_status;
-static int hotkey_orig_mask;
-
-static int hotkey_get(int *status, int *mask)
-{
-	if (!acpi_evalf(hkey_handle, status, "DHKC", "d"))
-		return 0;
-
-	if (hotkey_mask_supported)
-		if (!acpi_evalf(hkey_handle, mask, "DHKN", "d"))
-			return 0;
-
-	return 1;
-}
-
-static int hotkey_set(int status, int mask)
-{
-	int i;
-
-	if (!acpi_evalf(hkey_handle, NULL, "MHKC", "vd", status))
-		return 0;
-
-	if (hotkey_mask_supported)
-		for (i = 0; i < 32; i++) {
-			int bit = ((1 << i) & mask) != 0;
-			if (!acpi_evalf(hkey_handle,
-					NULL, "MHKM", "vdd", i + 1, bit))
-				return 0;
-		}
-
-	return 1;
-}
-
-static int hotkey_init(void)
-{
-	/* hotkey not supported on 570 */
-	hotkey_supported = hkey_handle != NULL;
-
-	if (hotkey_supported) {
-		/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-		   A30, R30, R31, T20-22, X20-21, X22-24 */
-		hotkey_mask_supported =
-		    acpi_evalf(hkey_handle, NULL, "DHKN", "qv");
-
-		if (!hotkey_get(&hotkey_orig_status, &hotkey_orig_mask))
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int hotkey_read(char *p)
-{
-	int status, mask;
-	int len = 0;
-
-	if (!hotkey_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-		return len;
-	}
-
-	if (!hotkey_get(&status, &mask))
-		return -EIO;
-
-	len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
-	if (hotkey_mask_supported) {
-		len += sprintf(p + len, "mask:\t\t0x%04x\n", mask);
-		len += sprintf(p + len,
-			       "commands:\tenable, disable, reset, <mask>\n");
-	} else {
-		len += sprintf(p + len, "mask:\t\tnot supported\n");
-		len += sprintf(p + len, "commands:\tenable, disable, reset\n");
-	}
-
-	return len;
-}
-
-static int hotkey_write(char *buf)
-{
-	int status, mask;
-	char *cmd;
-	int do_cmd = 0;
-
-	if (!hotkey_supported)
-		return -ENODEV;
-
-	if (!hotkey_get(&status, &mask))
-		return -EIO;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			status = 1;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			status = 0;
-		} else if (strlencmp(cmd, "reset") == 0) {
-			status = hotkey_orig_status;
-			mask = hotkey_orig_mask;
-		} else if (sscanf(cmd, "0x%x", &mask) == 1) {
-			/* mask set */
-		} else if (sscanf(cmd, "%x", &mask) == 1) {
-			/* mask set */
-		} else
-			return -EINVAL;
-		do_cmd = 1;
-	}
-
-	if (do_cmd && !hotkey_set(status, mask))
-		return -EIO;
-
-	return 0;
-}
-
-static void hotkey_exit(void)
-{
-	if (hotkey_supported)
-		hotkey_set(hotkey_orig_status, hotkey_orig_mask);
-}
-
-static void hotkey_notify(struct ibm_struct *ibm, u32 event)
-{
-	int hkey;
-
-	if (acpi_evalf(hkey_handle, &hkey, "MHKP", "d"))
-		acpi_bus_generate_event(ibm->device, event, hkey);
-	else {
-		printk(IBM_ERR "unknown hotkey event %d\n", event);
-		acpi_bus_generate_event(ibm->device, event, 0);
-	}
-}
-
-static int bluetooth_supported;
-
-static int bluetooth_init(void)
-{
-	/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-	   G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
-	bluetooth_supported = hkey_handle &&
-	    acpi_evalf(hkey_handle, NULL, "GBDC", "qv");
-
-	return 0;
-}
-
-static int bluetooth_status(void)
-{
-	int status;
-
-	if (!bluetooth_supported ||
-	    !acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-		status = 0;
-
-	return status;
-}
-
-static int bluetooth_read(char *p)
-{
-	int len = 0;
-	int status = bluetooth_status();
-
-	if (!bluetooth_supported)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!(status & 1))
-		len += sprintf(p + len, "status:\t\tnot installed\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
-}
-
-static int bluetooth_write(char *buf)
-{
-	int status = bluetooth_status();
-	char *cmd;
-	int do_cmd = 0;
-
-	if (!bluetooth_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			status |= 2;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			status &= ~2;
-		} else
-			return -EINVAL;
-		do_cmd = 1;
-	}
-
-	if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
-		return -EIO;
-
-	return 0;
-}
-
-static int wan_supported;
-
-static int wan_init(void)
-{
-	wan_supported = hkey_handle &&
-	    acpi_evalf(hkey_handle, NULL, "GWAN", "qv");
-
-	return 0;
-}
-
-static int wan_status(void)
-{
-	int status;
-
-	if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-		status = 0;
-
-	return status;
-}
-
-static int wan_read(char *p)
-{
-	int len = 0;
-	int status = wan_status();
-
-	if (!wan_supported)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!(status & 1))
-		len += sprintf(p + len, "status:\t\tnot installed\n");
-	else {
-		len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 1));
-		len += sprintf(p + len, "commands:\tenable, disable\n");
-	}
-
-	return len;
-}
-
-static int wan_write(char *buf)
-{
-	int status = wan_status();
-	char *cmd;
-	int do_cmd = 0;
-
-	if (!wan_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "enable") == 0) {
-			status |= 2;
-		} else if (strlencmp(cmd, "disable") == 0) {
-			status &= ~2;
-		} else
-			return -EINVAL;
-		do_cmd = 1;
-	}
-
-	if (do_cmd && !acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
-		return -EIO;
-
-	return 0;
-}
-
-enum video_access_mode {
-	IBMACPI_VIDEO_NONE = 0,
-	IBMACPI_VIDEO_570,	/* 570 */
-	IBMACPI_VIDEO_770,	/* 600e/x, 770e, 770x */
-	IBMACPI_VIDEO_NEW,	/* all others */
-};
-
-static enum video_access_mode video_supported;
-static int video_orig_autosw;
-
-static int video_init(void)
-{
-	int ivga;
-
-	if (vid2_handle && acpi_evalf(NULL, &ivga, "\\IVGA", "d") && ivga)
-		/* G41, assume IVGA doesn't change */
-		vid_handle = vid2_handle;
-
-	if (!vid_handle)
-		/* video switching not supported on R30, R31 */
-		video_supported = IBMACPI_VIDEO_NONE;
-	else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd"))
-		/* 570 */
-		video_supported = IBMACPI_VIDEO_570;
-	else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd"))
-		/* 600e/x, 770e, 770x */
-		video_supported = IBMACPI_VIDEO_770;
-	else
-		/* all others */
-		video_supported = IBMACPI_VIDEO_NEW;
-
-	return 0;
-}
-
-static int video_status(void)
-{
-	int status = 0;
-	int i;
-
-	if (video_supported == IBMACPI_VIDEO_570) {
-		if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87))
-			status = i & 3;
-	} else if (video_supported == IBMACPI_VIDEO_770) {
-		if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
-			status |= 0x01 * i;
-		if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
-			status |= 0x02 * i;
-	} else if (video_supported == IBMACPI_VIDEO_NEW) {
-		acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1);
-		if (acpi_evalf(NULL, &i, "\\VCDC", "d"))
-			status |= 0x02 * i;
-
-		acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0);
-		if (acpi_evalf(NULL, &i, "\\VCDL", "d"))
-			status |= 0x01 * i;
-		if (acpi_evalf(NULL, &i, "\\VCDD", "d"))
-			status |= 0x08 * i;
-	}
-
-	return status;
-}
-
-static int video_autosw(void)
-{
-	int autosw = 0;
-
-	if (video_supported == IBMACPI_VIDEO_570)
-		acpi_evalf(vid_handle, &autosw, "SWIT", "d");
-	else if (video_supported == IBMACPI_VIDEO_770 ||
-		 video_supported == IBMACPI_VIDEO_NEW)
-		acpi_evalf(vid_handle, &autosw, "^VDEE", "d");
-
-	return autosw & 1;
-}
-
-static int video_read(char *p)
-{
-	int status = video_status();
-	int autosw = video_autosw();
-	int len = 0;
-
-	if (!video_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-		return len;
-	}
-
-	len += sprintf(p + len, "status:\t\tsupported\n");
-	len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0));
-	len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1));
-	if (video_supported == IBMACPI_VIDEO_NEW)
-		len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3));
-	len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0));
-	len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n");
-	len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n");
-	if (video_supported == IBMACPI_VIDEO_NEW)
-		len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n");
-	len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n");
-	len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n");
-
-	return len;
-}
-
-static int video_switch(void)
-{
-	int autosw = video_autosw();
-	int ret;
-
-	if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-		return -EIO;
-	ret = video_supported == IBMACPI_VIDEO_570 ?
-	    acpi_evalf(ec_handle, NULL, "_Q16", "v") :
-	    acpi_evalf(vid_handle, NULL, "VSWT", "v");
-	acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-
-	return ret;
-}
-
-static int video_expand(void)
-{
-	if (video_supported == IBMACPI_VIDEO_570)
-		return acpi_evalf(ec_handle, NULL, "_Q17", "v");
-	else if (video_supported == IBMACPI_VIDEO_770)
-		return acpi_evalf(vid_handle, NULL, "VEXP", "v");
-	else
-		return acpi_evalf(NULL, NULL, "\\VEXP", "v");
-}
-
-static int video_switch2(int status)
-{
-	int ret;
-
-	if (video_supported == IBMACPI_VIDEO_570) {
-		ret = acpi_evalf(NULL, NULL,
-				 "\\_SB.PHS2", "vdd", 0x8b, status | 0x80);
-	} else if (video_supported == IBMACPI_VIDEO_770) {
-		int autosw = video_autosw();
-		if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-			return -EIO;
-
-		ret = acpi_evalf(vid_handle, NULL,
-				 "ASWT", "vdd", status * 0x100, 0);
-
-		acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw);
-	} else {
-		ret = acpi_evalf(NULL, NULL, "\\VUPS", "vd", 0x80) &&
-		    acpi_evalf(NULL, NULL, "\\VSDS", "vdd", status, 1);
-	}
-
-	return ret;
-}
-
-static int video_write(char *buf)
-{
-	char *cmd;
-	int enable, disable, status;
-
-	if (!video_supported)
-		return -ENODEV;
-
-	enable = disable = 0;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "lcd_enable") == 0) {
-			enable |= 0x01;
-		} else if (strlencmp(cmd, "lcd_disable") == 0) {
-			disable |= 0x01;
-		} else if (strlencmp(cmd, "crt_enable") == 0) {
-			enable |= 0x02;
-		} else if (strlencmp(cmd, "crt_disable") == 0) {
-			disable |= 0x02;
-		} else if (video_supported == IBMACPI_VIDEO_NEW &&
-			   strlencmp(cmd, "dvi_enable") == 0) {
-			enable |= 0x08;
-		} else if (video_supported == IBMACPI_VIDEO_NEW &&
-			   strlencmp(cmd, "dvi_disable") == 0) {
-			disable |= 0x08;
-		} else if (strlencmp(cmd, "auto_enable") == 0) {
-			if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1))
-				return -EIO;
-		} else if (strlencmp(cmd, "auto_disable") == 0) {
-			if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 0))
-				return -EIO;
-		} else if (strlencmp(cmd, "video_switch") == 0) {
-			if (!video_switch())
-				return -EIO;
-		} else if (strlencmp(cmd, "expand_toggle") == 0) {
-			if (!video_expand())
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	if (enable || disable) {
-		status = (video_status() & 0x0f & ~disable) | enable;
-		if (!video_switch2(status))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static void video_exit(void)
-{
-	acpi_evalf(vid_handle, NULL, "_DOS", "vd", video_orig_autosw);
-}
-
-static int light_supported;
-static int light_status_supported;
-
-static int light_init(void)
-{
-	/* light not supported on 570, 600e/x, 770e, 770x, G4x, R30, R31 */
-	light_supported = (cmos_handle || lght_handle) && !ledb_handle;
-
-	if (light_supported)
-		/* light status not supported on
-		   570, 600e/x, 770e, 770x, G4x, R30, R31, R32, X20 */
-		light_status_supported = acpi_evalf(ec_handle, NULL,
-						    "KBLT", "qv");
-
-	return 0;
-}
-
-static int light_read(char *p)
-{
-	int len = 0;
-	int status = 0;
-
-	if (!light_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	} else if (!light_status_supported) {
-		len += sprintf(p + len, "status:\t\tunknown\n");
-		len += sprintf(p + len, "commands:\ton, off\n");
-	} else {
-		if (!acpi_evalf(ec_handle, &status, "KBLT", "d"))
-			return -EIO;
-		len += sprintf(p + len, "status:\t\t%s\n", onoff(status, 0));
-		len += sprintf(p + len, "commands:\ton, off\n");
-	}
-
-	return len;
-}
-
-static int light_write(char *buf)
-{
-	int cmos_cmd, lght_cmd;
-	char *cmd;
-	int success;
-
-	if (!light_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "on") == 0) {
-			cmos_cmd = 0x0c;
-			lght_cmd = 1;
-		} else if (strlencmp(cmd, "off") == 0) {
-			cmos_cmd = 0x0d;
-			lght_cmd = 0;
-		} else
-			return -EINVAL;
-
-		success = cmos_handle ?
-		    acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd) :
-		    acpi_evalf(lght_handle, NULL, NULL, "vd", lght_cmd);
-		if (!success)
-			return -EIO;
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY)
-static int _sta(acpi_handle handle)
-{
-	int status;
-
-	if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
-		status = 0;
-
-	return status;
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_DOCK
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int dock_read(char *p)
-{
-	int len = 0;
-	int docked = dock_docked();
-
-	if (!dock_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else if (!docked)
-		len += sprintf(p + len, "status:\t\tundocked\n");
-	else {
-		len += sprintf(p + len, "status:\t\tdocked\n");
-		len += sprintf(p + len, "commands:\tdock, undock\n");
-	}
-
-	return len;
-}
-
-static int dock_write(char *buf)
-{
-	char *cmd;
-
-	if (!dock_docked())
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (strlencmp(cmd, "undock") == 0) {
-			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
-			    !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
-				return -EIO;
-		} else if (strlencmp(cmd, "dock") == 0) {
-			if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
-	int docked = dock_docked();
-	int pci = ibm->hid && strstr(ibm->hid, IBM_PCI_HID);
-
-	if (event == 1 && !pci)	/* 570 */
-		acpi_bus_generate_event(ibm->device, event, 1);	/* button */
-	else if (event == 1 && pci)	/* 570 */
-		acpi_bus_generate_event(ibm->device, event, 3);	/* dock */
-	else if (event == 3 && docked)
-		acpi_bus_generate_event(ibm->device, event, 1);	/* button */
-	else if (event == 3 && !docked)
-		acpi_bus_generate_event(ibm->device, event, 2);	/* undock */
-	else if (event == 0 && docked)
-		acpi_bus_generate_event(ibm->device, event, 3);	/* dock */
-	else {
-		printk(IBM_ERR "unknown dock event %d, status %d\n",
-		       event, _sta(dock_handle));
-		acpi_bus_generate_event(ibm->device, event, 0);	/* unknown */
-	}
-}
-#endif
-
-#ifdef CONFIG_ACPI_IBM_BAY
-static int bay_status_supported;
-static int bay_status2_supported;
-static int bay_eject_supported;
-static int bay_eject2_supported;
-
-static int bay_init(void)
-{
-	bay_status_supported = bay_handle &&
-	    acpi_evalf(bay_handle, NULL, "_STA", "qv");
-	bay_status2_supported = bay2_handle &&
-	    acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
-	bay_eject_supported = bay_handle && bay_ej_handle &&
-	    (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
-	bay_eject2_supported = bay2_handle && bay2_ej_handle &&
-	    (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
-	return 0;
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
-	int len = 0;
-	int occupied = bay_occupied(bay);
-	int occupied2 = bay_occupied(bay2);
-	int eject, eject2;
-
-	len += sprintf(p + len, "status:\t\t%s\n", bay_status_supported ?
-		       (occupied ? "occupied" : "unoccupied") :
-		       "not supported");
-	if (bay_status2_supported)
-		len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
-			       "occupied" : "unoccupied");
-
-	eject = bay_eject_supported && occupied;
-	eject2 = bay_eject2_supported && occupied2;
-
-	if (eject && eject2)
-		len += sprintf(p + len, "commands:\teject, eject2\n");
-	else if (eject)
-		len += sprintf(p + len, "commands:\teject\n");
-	else if (eject2)
-		len += sprintf(p + len, "commands:\teject2\n");
-
-	return len;
-}
-
-static int bay_write(char *buf)
-{
-	char *cmd;
-
-	if (!bay_eject_supported && !bay_eject2_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (bay_eject_supported && strlencmp(cmd, "eject") == 0) {
-			if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
-				return -EIO;
-		} else if (bay_eject2_supported &&
-			   strlencmp(cmd, "eject2") == 0) {
-			if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
-	acpi_bus_generate_event(ibm->device, event, 0);
-}
-#endif /* CONFIG_ACPI_IBM_BAY */
-
-static int cmos_read(char *p)
-{
-	int len = 0;
-
-	/* cmos not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
-	   R30, R31, T20-22, X20-21 */
-	if (!cmos_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\tsupported\n");
-		len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-21)\n");
-	}
-
-	return len;
-}
-
-static int cmos_eval(int cmos_cmd)
-{
-	if (cmos_handle)
-		return acpi_evalf(cmos_handle, NULL, NULL, "vd", cmos_cmd);
-	else
-		return 1;
-}
-
-static int cmos_write(char *buf)
-{
-	char *cmd;
-	int cmos_cmd;
-
-	if (!cmos_handle)
-		return -EINVAL;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%u", &cmos_cmd) == 1 &&
-		    cmos_cmd >= 0 && cmos_cmd <= 21) {
-			/* cmos_cmd set */
-		} else
-			return -EINVAL;
-
-		if (!cmos_eval(cmos_cmd))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-enum led_access_mode {
-	IBMACPI_LED_NONE = 0,
-	IBMACPI_LED_570,	/* 570 */
-	IBMACPI_LED_OLD,	/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-	IBMACPI_LED_NEW,	/* all others */
-};
-static enum led_access_mode led_supported;
-
-static int led_init(void)
-{
-	if (!led_handle)
-		/* led not supported on R30, R31 */
-		led_supported = IBMACPI_LED_NONE;
-	else if (strlencmp(led_path, "SLED") == 0)
-		/* 570 */
-		led_supported = IBMACPI_LED_570;
-	else if (strlencmp(led_path, "SYSL") == 0)
-		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
-		led_supported = IBMACPI_LED_OLD;
-	else
-		/* all others */
-		led_supported = IBMACPI_LED_NEW;
-
-	return 0;
-}
-
-#define led_status(s) ((s) == 0 ? "off" : ((s) == 1 ? "on" : "blinking"))
-
-static int led_read(char *p)
-{
-	int len = 0;
-
-	if (!led_supported) {
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-		return len;
-	}
-	len += sprintf(p + len, "status:\t\tsupported\n");
-
-	if (led_supported == IBMACPI_LED_570) {
-		/* 570 */
-		int i, status;
-		for (i = 0; i < 8; i++) {
-			if (!acpi_evalf(ec_handle,
-					&status, "GLED", "dd", 1 << i))
-				return -EIO;
-			len += sprintf(p + len, "%d:\t\t%s\n",
-				       i, led_status(status));
-		}
-	}
-
-	len += sprintf(p + len, "commands:\t"
-		       "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
-
-	return len;
-}
-
-/* off, on, blink */
-static const int led_sled_arg1[] = { 0, 1, 3 };
-static const int led_exp_hlbl[] = { 0, 0, 1 };	/* led# * */
-static const int led_exp_hlcl[] = { 0, 1, 1 };	/* led# * */
-static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
-
-#define EC_HLCL 0x0c
-#define EC_HLBL 0x0d
-#define EC_HLMS 0x0e
-
-static int led_write(char *buf)
-{
-	char *cmd;
-	int led, ind, ret;
-
-	if (!led_supported)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
-			return -EINVAL;
-
-		if (strstr(cmd, "off")) {
-			ind = 0;
-		} else if (strstr(cmd, "on")) {
-			ind = 1;
-		} else if (strstr(cmd, "blink")) {
-			ind = 2;
-		} else
-			return -EINVAL;
-
-		if (led_supported == IBMACPI_LED_570) {
-			/* 570 */
-			led = 1 << led;
-			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-					led, led_sled_arg1[ind]))
-				return -EIO;
-		} else if (led_supported == IBMACPI_LED_OLD) {
-			/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
-			led = 1 << led;
-			ret = ec_write(EC_HLMS, led);
-			if (ret >= 0)
-				ret =
-				    ec_write(EC_HLBL, led * led_exp_hlbl[ind]);
-			if (ret >= 0)
-				ret =
-				    ec_write(EC_HLCL, led * led_exp_hlcl[ind]);
-			if (ret < 0)
-				return ret;
-		} else {
-			/* all others */
-			if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
-					led, led_led_arg1[ind]))
-				return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-static int beep_read(char *p)
-{
-	int len = 0;
-
-	if (!beep_handle)
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	else {
-		len += sprintf(p + len, "status:\t\tsupported\n");
-		len += sprintf(p + len, "commands:\t<cmd> (<cmd> is 0-17)\n");
-	}
-
-	return len;
-}
-
-static int beep_write(char *buf)
-{
-	char *cmd;
-	int beep_cmd;
-
-	if (!beep_handle)
-		return -ENODEV;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%u", &beep_cmd) == 1 &&
-		    beep_cmd >= 0 && beep_cmd <= 17) {
-			/* beep_cmd set */
-		} else
-			return -EINVAL;
-		if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static int acpi_ec_read(int i, u8 * p)
-{
-	int v;
-
-	if (ecrd_handle) {
-		if (!acpi_evalf(ecrd_handle, &v, NULL, "dd", i))
-			return 0;
-		*p = v;
-	} else {
-		if (ec_read(i, p) < 0)
-			return 0;
-	}
-
-	return 1;
-}
-
-static int acpi_ec_write(int i, u8 v)
-{
-	if (ecwr_handle) {
-		if (!acpi_evalf(ecwr_handle, NULL, NULL, "vdd", i, v))
-			return 0;
-	} else {
-		if (ec_write(i, v) < 0)
-			return 0;
-	}
-
-	return 1;
-}
-
-static enum thermal_access_mode thermal_read_mode;
-
-static int thermal_init(void)
-{
-	u8 t, ta1, ta2;
-	int i;
-	int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv");
-
-	if (ibm_thinkpad_ec_found && experimental) {
-		/*
-		 * Direct EC access mode: sensors at registers
-		 * 0x78-0x7F, 0xC0-0xC7.  Registers return 0x00 for
-		 * non-implemented, thermal sensors return 0x80 when
-		 * not available
-		 */
-
-		ta1 = ta2 = 0;
-		for (i = 0; i < 8; i++) {
-			if (likely(acpi_ec_read(0x78 + i, &t))) {
-				ta1 |= t;
-			} else {
-				ta1 = 0;
-				break;
-			}
-			if (likely(acpi_ec_read(0xC0 + i, &t))) {
-				ta2 |= t;
-			} else {
-				ta1 = 0;
-				break;
-			}
-		}
-		if (ta1 == 0) {
-			/* This is sheer paranoia, but we handle it anyway */
-			if (acpi_tmp7) {
-				printk(IBM_ERR
-				       "ThinkPad ACPI EC access misbehaving, "
-				       "falling back to ACPI TMPx access mode\n");
-				thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
-			} else {
-				printk(IBM_ERR
-				       "ThinkPad ACPI EC access misbehaving, "
-				       "disabling thermal sensors access\n");
-				thermal_read_mode = IBMACPI_THERMAL_NONE;
-			}
-		} else {
-			thermal_read_mode =
-			    (ta2 != 0) ?
-			    IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8;
-		}
-	} else if (acpi_tmp7) {
-		if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) {
-			/* 600e/x, 770e, 770x */
-			thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT;
-		} else {
-			/* Standard ACPI TMPx access, max 8 sensors */
-			thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07;
-		}
-	} else {
-		/* temperatures not supported on 570, G4x, R30, R31, R32 */
-		thermal_read_mode = IBMACPI_THERMAL_NONE;
-	}
-
-	return 0;
-}
-
-static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s)
-{
-	int i, t;
-	s8 tmp;
-	char tmpi[] = "TMPi";
-
-	if (!s)
-		return -EINVAL;
-
-	switch (thermal_read_mode) {
-#if IBMACPI_MAX_THERMAL_SENSORS >= 16
-	case IBMACPI_THERMAL_TPEC_16:
-		for (i = 0; i < 8; i++) {
-			if (!acpi_ec_read(0xC0 + i, &tmp))
-				return -EIO;
-			s->temp[i + 8] = tmp * 1000;
-		}
-		/* fallthrough */
-#endif
-	case IBMACPI_THERMAL_TPEC_8:
-		for (i = 0; i < 8; i++) {
-			if (!acpi_ec_read(0x78 + i, &tmp))
-				return -EIO;
-			s->temp[i] = tmp * 1000;
-		}
-		return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8;
-
-	case IBMACPI_THERMAL_ACPI_UPDT:
-		if (!acpi_evalf(ec_handle, NULL, "UPDT", "v"))
-			return -EIO;
-		for (i = 0; i < 8; i++) {
-			tmpi[3] = '0' + i;
-			if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
-				return -EIO;
-			s->temp[i] = (t - 2732) * 100;
-		}
-		return 8;
-
-	case IBMACPI_THERMAL_ACPI_TMP07:
-		for (i = 0; i < 8; i++) {
-			tmpi[3] = '0' + i;
-			if (!acpi_evalf(ec_handle, &t, tmpi, "d"))
-				return -EIO;
-			s->temp[i] = t * 1000;
-		}
-		return 8;
-
-	case IBMACPI_THERMAL_NONE:
-	default:
-		return 0;
-	}
-}
-
-static int thermal_read(char *p)
-{
-	int len = 0;
-	int n, i;
-	struct ibm_thermal_sensors_struct t;
-
-	n = thermal_get_sensors(&t);
-	if (unlikely(n < 0))
-		return n;
-
-	len += sprintf(p + len, "temperatures:\t");
-
-	if (n > 0) {
-		for (i = 0; i < (n - 1); i++)
-			len += sprintf(p + len, "%d ", t.temp[i] / 1000);
-		len += sprintf(p + len, "%d\n", t.temp[i] / 1000);
-	} else
-		len += sprintf(p + len, "not supported\n");
-
-	return len;
-}
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(char *p)
-{
-	int len = 0;
-	int i, j;
-	u8 v;
-
-	len += sprintf(p + len, "EC      "
-		       " +00 +01 +02 +03 +04 +05 +06 +07"
-		       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
-	for (i = 0; i < 256; i += 16) {
-		len += sprintf(p + len, "EC 0x%02x:", i);
-		for (j = 0; j < 16; j++) {
-			if (!acpi_ec_read(i + j, &v))
-				break;
-			if (v != ecdump_regs[i + j])
-				len += sprintf(p + len, " *%02x", v);
-			else
-				len += sprintf(p + len, "  %02x", v);
-			ecdump_regs[i + j] = v;
-		}
-		len += sprintf(p + len, "\n");
-		if (j != 16)
-			break;
-	}
-
-	/* These are way too dangerous to advertise openly... */
-#if 0
-	len += sprintf(p + len, "commands:\t0x<offset> 0x<value>"
-		       " (<offset> is 00-ff, <value> is 00-ff)\n");
-	len += sprintf(p + len, "commands:\t0x<offset> <value>  "
-		       " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
-	return len;
-}
-
-static int ecdump_write(char *buf)
-{
-	char *cmd;
-	int i, v;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
-			/* i and v set */
-		} else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
-			/* i and v set */
-		} else
-			return -EINVAL;
-		if (i >= 0 && i < 256 && v >= 0 && v < 256) {
-			if (!acpi_ec_write(i, v))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int brightness_offset = 0x31;
-
-static int brightness_get(struct backlight_device *bd)
-{
-	u8 level;
-	if (!acpi_ec_read(brightness_offset, &level))
-		return -EIO;
-
-	level &= 0x7;
-
-	return level;
-}
-
-static int brightness_read(char *p)
-{
-	int len = 0;
-	int level;
-
-	if ((level = brightness_get(NULL)) < 0) {
-		len += sprintf(p + len, "level:\t\tunreadable\n");
-	} else {
-		len += sprintf(p + len, "level:\t\t%d\n", level & 0x7);
-		len += sprintf(p + len, "commands:\tup, down\n");
-		len += sprintf(p + len, "commands:\tlevel <level>"
-			       " (<level> is 0-7)\n");
-	}
-
-	return len;
-}
-
-#define BRIGHTNESS_UP	4
-#define BRIGHTNESS_DOWN	5
-
-static int brightness_set(int value)
-{
-	int cmos_cmd, inc, i;
-	int current_value = brightness_get(NULL);
-
-	value &= 7;
-
-	cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN;
-	inc = value > current_value ? 1 : -1;
-	for (i = current_value; i != value; i += inc) {
-		if (!cmos_eval(cmos_cmd))
-			return -EIO;
-		if (!acpi_ec_write(brightness_offset, i + inc))
-			return -EIO;
-	}
-
-	return 0;
-}
-
-static int brightness_write(char *buf)
-{
-	int level;
-	int new_level;
-	char *cmd;
-
-	while ((cmd = next_cmd(&buf))) {
-		if ((level = brightness_get(NULL)) < 0)
-			return level;
-		level &= 7;
-
-		if (strlencmp(cmd, "up") == 0) {
-			new_level = level == 7 ? 7 : level + 1;
-		} else if (strlencmp(cmd, "down") == 0) {
-			new_level = level == 0 ? 0 : level - 1;
-		} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
-			   new_level >= 0 && new_level <= 7) {
-			/* new_level set */
-		} else
-			return -EINVAL;
-
-		brightness_set(new_level);
-	}
-
-	return 0;
-}
-
-static int brightness_update_status(struct backlight_device *bd)
-{
-	return brightness_set(
-		(bd->props.fb_blank == FB_BLANK_UNBLANK &&
-		 bd->props.power == FB_BLANK_UNBLANK) ?
-				bd->props.brightness : 0);
-}
-
-static struct backlight_ops ibm_backlight_data = {
-        .get_brightness = brightness_get,
-        .update_status  = brightness_update_status,
-};
-
-static int brightness_init(void)
-{
-	int b;
-
-	b = brightness_get(NULL);
-	if (b < 0)
-		return b;
-
-	ibm_backlight_device = backlight_device_register("ibm", NULL, NULL,
-							 &ibm_backlight_data);
-	if (IS_ERR(ibm_backlight_device)) {
-		printk(IBM_ERR "Could not register backlight device\n");
-		return PTR_ERR(ibm_backlight_device);
-	}
-
-	ibm_backlight_device->props.max_brightness = 7;
-	ibm_backlight_device->props.brightness = b;
-	backlight_update_status(ibm_backlight_device);
-
-	return 0;
-}
-
-static void brightness_exit(void)
-{
-	if (ibm_backlight_device) {
-		backlight_device_unregister(ibm_backlight_device);
-		ibm_backlight_device = NULL;
-	}
-}
-
-static int volume_offset = 0x30;
-
-static int volume_read(char *p)
-{
-	int len = 0;
-	u8 level;
-
-	if (!acpi_ec_read(volume_offset, &level)) {
-		len += sprintf(p + len, "level:\t\tunreadable\n");
-	} else {
-		len += sprintf(p + len, "level:\t\t%d\n", level & 0xf);
-		len += sprintf(p + len, "mute:\t\t%s\n", onoff(level, 6));
-		len += sprintf(p + len, "commands:\tup, down, mute\n");
-		len += sprintf(p + len, "commands:\tlevel <level>"
-			       " (<level> is 0-15)\n");
-	}
-
-	return len;
-}
-
-#define VOLUME_DOWN	0
-#define VOLUME_UP	1
-#define VOLUME_MUTE	2
-
-static int volume_write(char *buf)
-{
-	int cmos_cmd, inc, i;
-	u8 level, mute;
-	int new_level, new_mute;
-	char *cmd;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (!acpi_ec_read(volume_offset, &level))
-			return -EIO;
-		new_mute = mute = level & 0x40;
-		new_level = level = level & 0xf;
-
-		if (strlencmp(cmd, "up") == 0) {
-			if (mute)
-				new_mute = 0;
-			else
-				new_level = level == 15 ? 15 : level + 1;
-		} else if (strlencmp(cmd, "down") == 0) {
-			if (mute)
-				new_mute = 0;
-			else
-				new_level = level == 0 ? 0 : level - 1;
-		} else if (sscanf(cmd, "level %d", &new_level) == 1 &&
-			   new_level >= 0 && new_level <= 15) {
-			/* new_level set */
-		} else if (strlencmp(cmd, "mute") == 0) {
-			new_mute = 0x40;
-		} else
-			return -EINVAL;
-
-		if (new_level != level) {	/* mute doesn't change */
-			cmos_cmd = new_level > level ? VOLUME_UP : VOLUME_DOWN;
-			inc = new_level > level ? 1 : -1;
-
-			if (mute && (!cmos_eval(cmos_cmd) ||
-				     !acpi_ec_write(volume_offset, level)))
-				return -EIO;
-
-			for (i = level; i != new_level; i += inc)
-				if (!cmos_eval(cmos_cmd) ||
-				    !acpi_ec_write(volume_offset, i + inc))
-					return -EIO;
-
-			if (mute && (!cmos_eval(VOLUME_MUTE) ||
-				     !acpi_ec_write(volume_offset,
-						    new_level + mute)))
-				return -EIO;
-		}
-
-		if (new_mute != mute) {	/* level doesn't change */
-			cmos_cmd = new_mute ? VOLUME_MUTE : VOLUME_UP;
-
-			if (!cmos_eval(cmos_cmd) ||
-			    !acpi_ec_write(volume_offset, level + new_mute))
-				return -EIO;
-		}
-	}
-
-	return 0;
-}
-
-static enum fan_status_access_mode fan_status_access_mode;
-static enum fan_control_access_mode fan_control_access_mode;
-static enum fan_control_commands fan_control_commands;
-
-static int fan_control_status_known;
-static u8 fan_control_initial_status;
-
-static void fan_watchdog_fire(struct work_struct *ignored);
-static int fan_watchdog_maxinterval;
-static DECLARE_DELAYED_WORK(fan_watchdog_task, fan_watchdog_fire);
-
-static int fan_init(void)
-{
-	fan_status_access_mode = IBMACPI_FAN_NONE;
-	fan_control_access_mode = IBMACPI_FAN_WR_NONE;
-	fan_control_commands = 0;
-	fan_control_status_known = 1;
-	fan_watchdog_maxinterval = 0;
-
-	if (gfan_handle) {
-		/* 570, 600e/x, 770e, 770x */
-		fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN;
-	} else {
-		/* all other ThinkPads: note that even old-style
-		 * ThinkPad ECs supports the fan control register */
-		if (likely(acpi_ec_read(fan_status_offset,
-					&fan_control_initial_status))) {
-			fan_status_access_mode = IBMACPI_FAN_RD_TPEC;
-
-			/* In some ThinkPads, neither the EC nor the ACPI
-			 * DSDT initialize the fan status, and it ends up
-			 * being set to 0x07 when it *could* be either
-			 * 0x07 or 0x80.
-			 *
-			 * Enable for TP-1Y (T43), TP-78 (R51e),
-			 * TP-76 (R52), TP-70 (T43, R52), which are known
-			 * to be buggy. */
-			if (fan_control_initial_status == 0x07 &&
-			    ibm_thinkpad_ec_found &&
-			    ((ibm_thinkpad_ec_found[0] == '1' &&
-			      ibm_thinkpad_ec_found[1] == 'Y') ||
-			     (ibm_thinkpad_ec_found[0] == '7' &&
-			      (ibm_thinkpad_ec_found[1] == '6' ||
-			       ibm_thinkpad_ec_found[1] == '8' ||
-			       ibm_thinkpad_ec_found[1] == '0'))
-			    )) {
-				printk(IBM_NOTICE
-				       "fan_init: initial fan status is "
-				       "unknown, assuming it is in auto "
-				       "mode\n");
-				fan_control_status_known = 0;
-			}
-		} else {
-			printk(IBM_ERR
-			       "ThinkPad ACPI EC access misbehaving, "
-			       "fan status and control unavailable\n");
-			return 0;
-		}
-	}
-
-	if (sfan_handle) {
-		/* 570, 770x-JL */
-		fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN;
-		fan_control_commands |=
-		    IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE;
-	} else {
-		if (!gfan_handle) {
-			/* gfan without sfan means no fan control */
-			/* all other models implement TP EC 0x2f control */
-
-			if (fans_handle) {
-				/* X31, X40, X41 */
-				fan_control_access_mode =
-				    IBMACPI_FAN_WR_ACPI_FANS;
-				fan_control_commands |=
-				    IBMACPI_FAN_CMD_SPEED |
-				    IBMACPI_FAN_CMD_LEVEL |
-				    IBMACPI_FAN_CMD_ENABLE;
-			} else {
-				fan_control_access_mode = IBMACPI_FAN_WR_TPEC;
-				fan_control_commands |=
-				    IBMACPI_FAN_CMD_LEVEL |
-				    IBMACPI_FAN_CMD_ENABLE;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static int fan_get_status(u8 *status)
-{
-	u8 s;
-
-	/* TODO:
-	 * Add IBMACPI_FAN_RD_ACPI_FANS ? */
-
-	switch (fan_status_access_mode) {
-	case IBMACPI_FAN_RD_ACPI_GFAN:
-		/* 570, 600e/x, 770e, 770x */
-
-		if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d")))
-			return -EIO;
-
-		if (likely(status))
-			*status = s & 0x07;
-
-		break;
-
-	case IBMACPI_FAN_RD_TPEC:
-		/* all except 570, 600e/x, 770e, 770x */
-		if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
-			return -EIO;
-
-		if (likely(status))
-			*status = s;
-
-		break;
-
-	default:
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static int fan_get_speed(unsigned int *speed)
-{
-	u8 hi, lo;
-
-	switch (fan_status_access_mode) {
-	case IBMACPI_FAN_RD_TPEC:
-		/* all except 570, 600e/x, 770e, 770x */
-		if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
-			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
-			return -EIO;
-
-		if (likely(speed))
-			*speed = (hi << 8) | lo;
-
-		break;
-
-	default:
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-static void fan_exit(void)
-{
-	cancel_delayed_work(&fan_watchdog_task);
-	flush_scheduled_work();
-}
-
-static void fan_watchdog_reset(void)
-{
-	static int fan_watchdog_active = 0;
-
-	if (fan_watchdog_active)
-		cancel_delayed_work(&fan_watchdog_task);
-
-	if (fan_watchdog_maxinterval > 0) {
-		fan_watchdog_active = 1;
-		if (!schedule_delayed_work(&fan_watchdog_task,
-				msecs_to_jiffies(fan_watchdog_maxinterval
-						 * 1000))) {
-			printk(IBM_ERR "failed to schedule the fan watchdog, "
-			       "watchdog will not trigger\n");
-		}
-	} else
-		fan_watchdog_active = 0;
-}
-
-static int fan_read(char *p)
-{
-	int len = 0;
-	int rc;
-	u8 status;
-	unsigned int speed = 0;
-
-	switch (fan_status_access_mode) {
-	case IBMACPI_FAN_RD_ACPI_GFAN:
-		/* 570, 600e/x, 770e, 770x */
-		if ((rc = fan_get_status(&status)) < 0)
-			return rc;
-
-		len += sprintf(p + len, "status:\t\t%s\n"
-			       "level:\t\t%d\n",
-			       (status != 0) ? "enabled" : "disabled", status);
-		break;
-
-	case IBMACPI_FAN_RD_TPEC:
-		/* all except 570, 600e/x, 770e, 770x */
-		if ((rc = fan_get_status(&status)) < 0)
-			return rc;
-
-		if (unlikely(!fan_control_status_known)) {
-			if (status != fan_control_initial_status)
-				fan_control_status_known = 1;
-			else
-				/* Return most likely status. In fact, it
-				 * might be the only possible status */
-				status = IBMACPI_FAN_EC_AUTO;
-		}
-
-		len += sprintf(p + len, "status:\t\t%s\n",
-			       (status != 0) ? "enabled" : "disabled");
-
-		/* No ThinkPad boots on disengaged mode, we can safely
-		 * assume the tachometer is online if fan control status
-		 * was unknown */
-		if ((rc = fan_get_speed(&speed)) < 0)
-			return rc;
-
-		len += sprintf(p + len, "speed:\t\t%d\n", speed);
-
-		if (status & IBMACPI_FAN_EC_DISENGAGED)
-			/* Disengaged mode takes precedence */
-			len += sprintf(p + len, "level:\t\tdisengaged\n");
-		else if (status & IBMACPI_FAN_EC_AUTO)
-			len += sprintf(p + len, "level:\t\tauto\n");
-		else
-			len += sprintf(p + len, "level:\t\t%d\n", status);
-		break;
-
-	case IBMACPI_FAN_NONE:
-	default:
-		len += sprintf(p + len, "status:\t\tnot supported\n");
-	}
-
-	if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) {
-		len += sprintf(p + len, "commands:\tlevel <level>");
-
-		switch (fan_control_access_mode) {
-		case IBMACPI_FAN_WR_ACPI_SFAN:
-			len += sprintf(p + len, " (<level> is 0-7)\n");
-			break;
-
-		default:
-			len += sprintf(p + len, " (<level> is 0-7, "
-				       "auto, disengaged)\n");
-			break;
-		}
-	}
-
-	if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE)
-		len += sprintf(p + len, "commands:\tenable, disable\n"
-			       "commands:\twatchdog <timeout> (<timeout> is 0 (off), "
-			       "1-120 (seconds))\n");
-
-	if (fan_control_commands & IBMACPI_FAN_CMD_SPEED)
-		len += sprintf(p + len, "commands:\tspeed <speed>"
-			       " (<speed> is 0-65535)\n");
-
-	return len;
-}
-
-static int fan_set_level(int level)
-{
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_SFAN:
-		if (level >= 0 && level <= 7) {
-			if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level))
-				return -EIO;
-		} else
-			return -EINVAL;
-		break;
-
-	case IBMACPI_FAN_WR_ACPI_FANS:
-	case IBMACPI_FAN_WR_TPEC:
-		if ((level != IBMACPI_FAN_EC_AUTO) &&
-		    (level != IBMACPI_FAN_EC_DISENGAGED) &&
-		    ((level < 0) || (level > 7)))
-			return -EINVAL;
-
-		if (!acpi_ec_write(fan_status_offset, level))
-			return -EIO;
-		else
-			fan_control_status_known = 1;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_set_enable(void)
-{
-	u8 s;
-	int rc;
-
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_FANS:
-	case IBMACPI_FAN_WR_TPEC:
-		if ((rc = fan_get_status(&s)) < 0)
-			return rc;
-
-		/* Don't go out of emergency fan mode */
-		if (s != 7)
-			s = IBMACPI_FAN_EC_AUTO;
-
-		if (!acpi_ec_write(fan_status_offset, s))
-			return -EIO;
-		else
-			fan_control_status_known = 1;
-		break;
-
-	case IBMACPI_FAN_WR_ACPI_SFAN:
-		if ((rc = fan_get_status(&s)) < 0)
-			return rc;
-
-		s &= 0x07;
-
-		/* Set fan to at least level 4 */
-		if (s < 4)
-			s = 4;
-
-		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s))
-			return -EIO;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_set_disable(void)
-{
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_FANS:
-	case IBMACPI_FAN_WR_TPEC:
-		if (!acpi_ec_write(fan_status_offset, 0x00))
-			return -EIO;
-		else
-			fan_control_status_known = 1;
-		break;
-
-	case IBMACPI_FAN_WR_ACPI_SFAN:
-		if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00))
-			return -EIO;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_set_speed(int speed)
-{
-	switch (fan_control_access_mode) {
-	case IBMACPI_FAN_WR_ACPI_FANS:
-		if (speed >= 0 && speed <= 65535) {
-			if (!acpi_evalf(fans_handle, NULL, NULL, "vddd",
-					speed, speed, speed))
-				return -EIO;
-		} else
-			return -EINVAL;
-		break;
-
-	default:
-		return -ENXIO;
-	}
-	return 0;
-}
-
-static int fan_write_cmd_level(const char *cmd, int *rc)
-{
-	int level;
-
-	if (strlencmp(cmd, "level auto") == 0)
-		level = IBMACPI_FAN_EC_AUTO;
-	else if (strlencmp(cmd, "level disengaged") == 0)
-		level = IBMACPI_FAN_EC_DISENGAGED;
-	else if (sscanf(cmd, "level %d", &level) != 1)
-		return 0;
-
-	if ((*rc = fan_set_level(level)) == -ENXIO)
-		printk(IBM_ERR "level command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_enable(const char *cmd, int *rc)
-{
-	if (strlencmp(cmd, "enable") != 0)
-		return 0;
-
-	if ((*rc = fan_set_enable()) == -ENXIO)
-		printk(IBM_ERR "enable command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_disable(const char *cmd, int *rc)
-{
-	if (strlencmp(cmd, "disable") != 0)
-		return 0;
-
-	if ((*rc = fan_set_disable()) == -ENXIO)
-		printk(IBM_ERR "disable command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_speed(const char *cmd, int *rc)
-{
-	int speed;
-
-	/* TODO:
-	 * Support speed <low> <medium> <high> ? */
-
-	if (sscanf(cmd, "speed %d", &speed) != 1)
-		return 0;
-
-	if ((*rc = fan_set_speed(speed)) == -ENXIO)
-		printk(IBM_ERR "speed command accepted for unsupported "
-		       "access mode %d", fan_control_access_mode);
-
-	return 1;
-}
-
-static int fan_write_cmd_watchdog(const char *cmd, int *rc)
-{
-	int interval;
-
-	if (sscanf(cmd, "watchdog %d", &interval) != 1)
-		return 0;
-
-	if (interval < 0 || interval > 120)
-		*rc = -EINVAL;
-	else
-		fan_watchdog_maxinterval = interval;
-
-	return 1;
-}
-
-static int fan_write(char *buf)
-{
-	char *cmd;
-	int rc = 0;
-
-	while (!rc && (cmd = next_cmd(&buf))) {
-		if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) &&
-		      fan_write_cmd_level(cmd, &rc)) &&
-		    !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) &&
-		      (fan_write_cmd_enable(cmd, &rc) ||
-		       fan_write_cmd_disable(cmd, &rc) ||
-		       fan_write_cmd_watchdog(cmd, &rc))) &&
-		    !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) &&
-		      fan_write_cmd_speed(cmd, &rc))
-		    )
-			rc = -EINVAL;
-		else if (!rc)
-			fan_watchdog_reset();
-	}
-
-	return rc;
-}
-
-static void fan_watchdog_fire(struct work_struct *ignored)
-{
-	printk(IBM_NOTICE "fan watchdog: enabling fan\n");
-	if (fan_set_enable()) {
-		printk(IBM_ERR "fan watchdog: error while enabling fan\n");
-		/* reschedule for later */
-		fan_watchdog_reset();
-	}
-}
-
-static struct ibm_struct ibms[] = {
-	{
-	 .name = "driver",
-	 .init = ibm_acpi_driver_init,
-	 .read = driver_read,
-	 },
-	{
-	 .name = "hotkey",
-	 .hid = IBM_HKEY_HID,
-	 .init = hotkey_init,
-	 .read = hotkey_read,
-	 .write = hotkey_write,
-	 .exit = hotkey_exit,
-	 .notify = hotkey_notify,
-	 .handle = &hkey_handle,
-	 .type = ACPI_DEVICE_NOTIFY,
-	 },
-	{
-	 .name = "bluetooth",
-	 .init = bluetooth_init,
-	 .read = bluetooth_read,
-	 .write = bluetooth_write,
-	 },
-	{
-	 .name = "wan",
-	 .init = wan_init,
-	 .read = wan_read,
-	 .write = wan_write,
-	 .experimental = 1,
-	 },
-	{
-	 .name = "video",
-	 .init = video_init,
-	 .read = video_read,
-	 .write = video_write,
-	 .exit = video_exit,
-	 },
-	{
-	 .name = "light",
-	 .init = light_init,
-	 .read = light_read,
-	 .write = light_write,
-	 },
-#ifdef CONFIG_ACPI_IBM_DOCK
-	{
-	 .name = "dock",
-	 .read = dock_read,
-	 .write = dock_write,
-	 .notify = dock_notify,
-	 .handle = &dock_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	 },
-	{
-	 .name = "dock",
-	 .hid = IBM_PCI_HID,
-	 .notify = dock_notify,
-	 .handle = &pci_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	 },
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-	{
-	 .name = "bay",
-	 .init = bay_init,
-	 .read = bay_read,
-	 .write = bay_write,
-	 .notify = bay_notify,
-	 .handle = &bay_handle,
-	 .type = ACPI_SYSTEM_NOTIFY,
-	 },
-#endif /* CONFIG_ACPI_IBM_BAY */
-	{
-	 .name = "cmos",
-	 .read = cmos_read,
-	 .write = cmos_write,
-	 },
-	{
-	 .name = "led",
-	 .init = led_init,
-	 .read = led_read,
-	 .write = led_write,
-	 },
-	{
-	 .name = "beep",
-	 .read = beep_read,
-	 .write = beep_write,
-	 },
-	{
-	 .name = "thermal",
-	 .init = thermal_init,
-	 .read = thermal_read,
-	 },
-	{
-	 .name = "ecdump",
-	 .read = ecdump_read,
-	 .write = ecdump_write,
-	 .experimental = 1,
-	 },
-	{
-	 .name = "brightness",
-	 .read = brightness_read,
-	 .write = brightness_write,
-	 .init = brightness_init,
-	 .exit = brightness_exit,
-	 },
-	{
-	 .name = "volume",
-	 .read = volume_read,
-	 .write = volume_write,
-	 },
-	{
-	 .name = "fan",
-	 .read = fan_read,
-	 .write = fan_write,
-	 .init = fan_init,
-	 .exit = fan_exit,
-	 .experimental = 1,
-	 },
-};
-
-static int dispatch_read(char *page, char **start, off_t off, int count,
-			 int *eof, void *data)
-{
-	struct ibm_struct *ibm = data;
-	int len;
-
-	if (!ibm || !ibm->read)
-		return -EINVAL;
-
-	len = ibm->read(page);
-	if (len < 0)
-		return len;
-
-	if (len <= off + count)
-		*eof = 1;
-	*start = page + off;
-	len -= off;
-	if (len > count)
-		len = count;
-	if (len < 0)
-		len = 0;
-
-	return len;
-}
-
-static int dispatch_write(struct file *file, const char __user * userbuf,
-			  unsigned long count, void *data)
-{
-	struct ibm_struct *ibm = data;
-	char *kernbuf;
-	int ret;
-
-	if (!ibm || !ibm->write)
-		return -EINVAL;
-
-	kernbuf = kmalloc(count + 2, GFP_KERNEL);
-	if (!kernbuf)
-		return -ENOMEM;
-
-	if (copy_from_user(kernbuf, userbuf, count)) {
-		kfree(kernbuf);
-		return -EFAULT;
-	}
-
-	kernbuf[count] = 0;
-	strcat(kernbuf, ",");
-	ret = ibm->write(kernbuf);
-	if (ret == 0)
-		ret = count;
-
-	kfree(kernbuf);
-
-	return ret;
-}
-
-static void dispatch_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct ibm_struct *ibm = data;
-
-	if (!ibm || !ibm->notify)
-		return;
-
-	ibm->notify(ibm, event);
-}
-
-static int __init setup_notify(struct ibm_struct *ibm)
-{
-	acpi_status status;
-	int ret;
-
-	if (!*ibm->handle)
-		return 0;
-
-	ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
-	if (ret < 0) {
-		printk(IBM_ERR "%s device not present\n", ibm->name);
-		return -ENODEV;
-	}
-
-	acpi_driver_data(ibm->device) = ibm;
-	sprintf(acpi_device_class(ibm->device), "%s/%s", IBM_NAME, ibm->name);
-
-	status = acpi_install_notify_handler(*ibm->handle, ibm->type,
-					     dispatch_notify, ibm);
-	if (ACPI_FAILURE(status)) {
-		if (status == AE_ALREADY_EXISTS) {
-			printk(IBM_NOTICE "another device driver is already handling %s events\n",
-				ibm->name);
-		} else {
-			printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
-				ibm->name, status);
-		}
-		return -ENODEV;
-	}
-	ibm->notify_installed = 1;
-	return 0;
-}
-
-static int __init ibm_device_add(struct acpi_device *device)
-{
-	return 0;
-}
-
-static int __init register_driver(struct ibm_struct *ibm)
-{
-	int ret;
-
-	ibm->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL);
-	if (!ibm->driver) {
-		printk(IBM_ERR "kmalloc(ibm->driver) failed\n");
-		return -1;
-	}
-
-	sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name);
-	ibm->driver->ids = ibm->hid;
-	ibm->driver->ops.add = &ibm_device_add;
-
-	ret = acpi_bus_register_driver(ibm->driver);
-	if (ret < 0) {
-		printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
-		       ibm->hid, ret);
-		kfree(ibm->driver);
-	}
-
-	return ret;
-}
-
-static void ibm_exit(struct ibm_struct *ibm);
-
-static int __init ibm_init(struct ibm_struct *ibm)
-{
-	int ret;
-	struct proc_dir_entry *entry;
-
-	if (ibm->experimental && !experimental)
-		return 0;
-
-	if (ibm->hid) {
-		ret = register_driver(ibm);
-		if (ret < 0)
-			return ret;
-		ibm->driver_registered = 1;
-	}
-
-	if (ibm->init) {
-		ret = ibm->init();
-		if (ret != 0)
-			return ret;
-		ibm->init_called = 1;
-	}
-
-	if (ibm->read) {
-		entry = create_proc_entry(ibm->name,
-					  S_IFREG | S_IRUGO | S_IWUSR,
-					  proc_dir);
-		if (!entry) {
-			printk(IBM_ERR "unable to create proc entry %s\n",
-			       ibm->name);
-			return -ENODEV;
-		}
-		entry->owner = THIS_MODULE;
-		entry->data = ibm;
-		entry->read_proc = &dispatch_read;
-		if (ibm->write)
-			entry->write_proc = &dispatch_write;
-		ibm->proc_created = 1;
-	}
-
-	if (ibm->notify) {
-		ret = setup_notify(ibm);
-		if (ret == -ENODEV) {
-			printk(IBM_NOTICE "disabling subdriver %s\n",
-				ibm->name);
-			ibm_exit(ibm);
-			return 0;
-		}
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static void ibm_exit(struct ibm_struct *ibm)
-{
-	if (ibm->notify_installed)
-		acpi_remove_notify_handler(*ibm->handle, ibm->type,
-					   dispatch_notify);
-
-	if (ibm->proc_created)
-		remove_proc_entry(ibm->name, proc_dir);
-
-	if (ibm->init_called && ibm->exit)
-		ibm->exit();
-
-	if (ibm->driver_registered) {
-		acpi_bus_unregister_driver(ibm->driver);
-		kfree(ibm->driver);
-	}
-}
-
-static void __init ibm_handle_init(char *name,
-				   acpi_handle * handle, acpi_handle parent,
-				   char **paths, int num_paths, char **path)
-{
-	int i;
-	acpi_status status;
-
-	for (i = 0; i < num_paths; i++) {
-		status = acpi_get_handle(parent, paths[i], handle);
-		if (ACPI_SUCCESS(status)) {
-			*path = paths[i];
-			return;
-		}
-	}
-
-	*handle = NULL;
-}
-
-#define IBM_HANDLE_INIT(object)						\
-	ibm_handle_init(#object, &object##_handle, *object##_parent,	\
-		object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
-
-static int __init set_ibm_param(const char *val, struct kernel_param *kp)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(ibms); i++)
-		if (strcmp(ibms[i].name, kp->name) == 0 && ibms[i].write) {
-			if (strlen(val) > sizeof(ibms[i].param) - 2)
-				return -ENOSPC;
-			strcpy(ibms[i].param, val);
-			strcat(ibms[i].param, ",");
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-#define IBM_PARAM(feature) \
-	module_param_call(feature, set_ibm_param, NULL, NULL, 0)
-
-IBM_PARAM(hotkey);
-IBM_PARAM(bluetooth);
-IBM_PARAM(video);
-IBM_PARAM(light);
-#ifdef CONFIG_ACPI_IBM_DOCK
-IBM_PARAM(dock);
-#endif
-#ifdef CONFIG_ACPI_IBM_BAY
-IBM_PARAM(bay);
-#endif /* CONFIG_ACPI_IBM_BAY */
-IBM_PARAM(cmos);
-IBM_PARAM(led);
-IBM_PARAM(beep);
-IBM_PARAM(ecdump);
-IBM_PARAM(brightness);
-IBM_PARAM(volume);
-IBM_PARAM(fan);
-
-static void acpi_ibm_exit(void)
-{
-	int i;
-
-	for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
-		ibm_exit(&ibms[i]);
-
-	if (proc_dir)
-		remove_proc_entry(IBM_DIR, acpi_root_dir);
-
-	if (ibm_thinkpad_ec_found)
-		kfree(ibm_thinkpad_ec_found);
-}
-
-static char* __init check_dmi_for_ec(void)
-{
-	struct dmi_device *dev = NULL;
-	char ec_fw_string[18];
-
-	/*
-	 * ThinkPad T23 or newer, A31 or newer, R50e or newer,
-	 * X32 or newer, all Z series;  Some models must have an
-	 * up-to-date BIOS or they will not be detected.
-	 *
-	 * See http://thinkwiki.org/wiki/List_of_DMI_IDs
-	 */
-	while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) {
-		if (sscanf(dev->name,
-			   "IBM ThinkPad Embedded Controller -[%17c",
-			   ec_fw_string) == 1) {
-			ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
-			ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
-			return kstrdup(ec_fw_string, GFP_KERNEL);
-		}
-	}
-	return NULL;
-}
-
-static int __init acpi_ibm_init(void)
-{
-	int ret, i;
-
-	if (acpi_disabled)
-		return -ENODEV;
-
-	/* ec is required because many other handles are relative to it */
-	IBM_HANDLE_INIT(ec);
-	if (!ec_handle) {
-		printk(IBM_ERR "ec object not found\n");
-		return -ENODEV;
-	}
-
-	/* Models with newer firmware report the EC in DMI */
-	ibm_thinkpad_ec_found = check_dmi_for_ec();
-
-	/* these handles are not required */
-	IBM_HANDLE_INIT(vid);
-	IBM_HANDLE_INIT(vid2);
-	IBM_HANDLE_INIT(ledb);
-	IBM_HANDLE_INIT(led);
-	IBM_HANDLE_INIT(hkey);
-	IBM_HANDLE_INIT(lght);
-	IBM_HANDLE_INIT(cmos);
-#ifdef CONFIG_ACPI_IBM_DOCK
-	IBM_HANDLE_INIT(dock);
-#endif
-	IBM_HANDLE_INIT(pci);
-#ifdef CONFIG_ACPI_IBM_BAY
-	IBM_HANDLE_INIT(bay);
-	if (bay_handle)
-		IBM_HANDLE_INIT(bay_ej);
-	IBM_HANDLE_INIT(bay2);
-	if (bay2_handle)
-		IBM_HANDLE_INIT(bay2_ej);
-#endif /* CONFIG_ACPI_IBM_BAY */
-	IBM_HANDLE_INIT(beep);
-	IBM_HANDLE_INIT(ecrd);
-	IBM_HANDLE_INIT(ecwr);
-	IBM_HANDLE_INIT(fans);
-	IBM_HANDLE_INIT(gfan);
-	IBM_HANDLE_INIT(sfan);
-
-	proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
-	if (!proc_dir) {
-		printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
-		acpi_ibm_exit();
-		return -ENODEV;
-	}
-	proc_dir->owner = THIS_MODULE;
-
-	for (i = 0; i < ARRAY_SIZE(ibms); i++) {
-		ret = ibm_init(&ibms[i]);
-		if (ret >= 0 && *ibms[i].param)
-			ret = ibms[i].write(ibms[i].param);
-		if (ret < 0) {
-			acpi_ibm_exit();
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-module_init(acpi_ibm_init);
-module_exit(acpi_ibm_exit);