Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm.git

4 files changed, 170 insertions, 37 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e85097bceff..4bf0e8737e1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -635,10 +635,6 @@ config PM
 	  and the Battery Powered Linux mini-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-	  Note that, even if you say N here, Linux on the x86 architecture
-	  will issue the hlt instruction if nothing is to be done, thereby
-	  sending the processor to sleep and saving power.
-
 config APM
 	tristate "Advanced Power Management Emulation"
 	depends on PM
@@ -650,12 +646,6 @@ config APM
 	  battery status information, and user-space programs will receive
 	  notification of APM "events" (e.g. battery status change).
 
-	  If you select "Y" here, you can disable actual use of the APM
-	  BIOS by passing the "apm=off" option to the kernel at boot time.
-
-	  Note that the APM support is almost completely disabled for
-	  machines with more than one CPU.
-
 	  In order to use APM, you will need supporting software. For location
 	  and more information, read <file:Documentation/pm.txt> and the
 	  Battery Powered Linux mini-HOWTO, available from
@@ -665,39 +655,12 @@ config APM
 	  manpage ("man 8 hdparm") for that), and it doesn't turn off
 	  VESA-compliant "green" monitors.
 
-	  This driver does not support the TI 4000M TravelMate and the ACER
-	  486/DX4/75 because they don't have compliant BIOSes. Many "green"
-	  desktop machines also don't have compliant BIOSes, and this driver
-	  may cause those machines to panic during the boot phase.
-
 	  Generally, if you don't have a battery in your machine, there isn't
 	  much point in using this driver and you should say N. If you get
 	  random kernel OOPSes or reboots that don't seem to be related to
 	  anything, try disabling/enabling this option (or disabling/enabling
 	  APM in your BIOS).
 
-	  Some other things you should try when experiencing seemingly random,
-	  "weird" problems:
-
-	  1) make sure that you have enough swap space and that it is
-	  enabled.
-	  2) pass the "no-hlt" option to the kernel
-	  3) switch on floating point emulation in the kernel and pass
-	  the "no387" option to the kernel
-	  4) pass the "floppy=nodma" option to the kernel
-	  5) pass the "mem=4M" option to the kernel (thereby disabling
-	  all but the first 4 MB of RAM)
-	  6) make sure that the CPU is not over clocked.
-	  7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
-	  8) disable the cache from your BIOS settings
-	  9) install a fan for the video card or exchange video RAM
-	  10) install a better fan for the CPU
-	  11) exchange RAM chips
-	  12) exchange the motherboard.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called apm.
-
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 692af6b5e8f..666ba393575 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,6 +1,9 @@
 config ICST525
 	bool
 
+config ARM_GIC
+	bool
+
 config ICST307
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 11f20a43ee3..a87886564b1 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -4,6 +4,7 @@
 
 obj-y				+= rtctime.o
 obj-$(CONFIG_ARM_AMBA)		+= amba.o
+obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ICST525)		+= icst525.o
 obj-$(CONFIG_ICST307)		+= icst307.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
new file mode 100644
index 00000000000..51dbf5489b6
--- /dev/null
+++ b/arch/arm/common/gic.c
@@ -0,0 +1,166 @@
+/*
+ *  linux/arch/arm/common/gic.c
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Interrupt architecture for the GIC:
+ *
+ * o There is one Interrupt Distributor, which receives interrupts
+ *   from system devices and sends them to the Interrupt Controllers.
+ *
+ * o There is one CPU Interface per CPU, which sends interrupts sent
+ *   by the Distributor, and interrupts generated locally, to the
+ *   associated CPU.
+ *
+ * Note that IRQs 0-31 are special - they are local to each CPU.
+ * As such, the enable set/clear, pending set/clear and active bit
+ * registers are banked per-cpu for these sources.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/smp.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware/gic.h>
+
+static void __iomem *gic_dist_base;
+static void __iomem *gic_cpu_base;
+
+/*
+ * Routines to acknowledge, disable and enable interrupts
+ *
+ * Linux assumes that when we're done with an interrupt we need to
+ * unmask it, in the same way we need to unmask an interrupt when
+ * we first enable it.
+ *
+ * The GIC has a seperate notion of "end of interrupt" to re-enable
+ * an interrupt after handling, in order to support hardware
+ * prioritisation.
+ *
+ * We can make the GIC behave in the way that Linux expects by making
+ * our "acknowledge" routine disable the interrupt, then mark it as
+ * complete.
+ */
+static void gic_ack_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+}
+
+static void gic_mask_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+}
+
+static void gic_unmask_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+}
+
+static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+{
+	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+	unsigned int shift = (irq % 4) * 8;
+	u32 val;
+
+	val = readl(reg) & ~(0xff << shift);
+	val |= 1 << (cpu + shift);
+	writel(val, reg);
+}
+
+static struct irqchip gic_chip = {
+	.ack		= gic_ack_irq,
+	.mask		= gic_mask_irq,
+	.unmask		= gic_unmask_irq,
+#ifdef CONFIG_SMP
+	.set_cpu	= gic_set_cpu,
+#endif
+};
+
+void __init gic_dist_init(void __iomem *base)
+{
+	unsigned int max_irq, i;
+	u32 cpumask = 1 << smp_processor_id();
+
+	cpumask |= cpumask << 8;
+	cpumask |= cpumask << 16;
+
+	gic_dist_base = base;
+
+	writel(0, base + GIC_DIST_CTRL);
+
+	/*
+	 * Find out how many interrupts are supported.
+	 */
+	max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
+	max_irq = (max_irq + 1) * 32;
+
+	/*
+	 * The GIC only supports up to 1020 interrupt sources.
+	 * Limit this to either the architected maximum, or the
+	 * platform maximum.
+	 */
+	if (max_irq > max(1020, NR_IRQS))
+		max_irq = max(1020, NR_IRQS);
+
+	/*
+	 * Set all global interrupts to be level triggered, active low.
+	 */
+	for (i = 32; i < max_irq; i += 16)
+		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
+
+	/*
+	 * Set all global interrupts to this CPU only.
+	 */
+	for (i = 32; i < max_irq; i += 4)
+		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
+
+	/*
+	 * Set priority on all interrupts.
+	 */
+	for (i = 0; i < max_irq; i += 4)
+		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+
+	/*
+	 * Disable all interrupts.
+	 */
+	for (i = 0; i < max_irq; i += 32)
+		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+
+	/*
+	 * Setup the Linux IRQ subsystem.
+	 */
+	for (i = 29; i < max_irq; i++) {
+		set_irq_chip(i, &gic_chip);
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+
+	writel(1, base + GIC_DIST_CTRL);
+}
+
+void __cpuinit gic_cpu_init(void __iomem *base)
+{
+	gic_cpu_base = base;
+	writel(0xf0, base + GIC_CPU_PRIMASK);
+	writel(1, base + GIC_CPU_CTRL);
+}
+
+#ifdef CONFIG_SMP
+void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+{
+	unsigned long map = *cpus_addr(cpumask);
+
+	writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+}
+#endif