diff options
author | Paul Mundt <lethal@linux-sh.org> | 2012-07-25 13:13:09 +0900 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2012-07-25 13:13:09 +0900 |
commit | a3fd869a6425082f6014ded43684508602319900 (patch) | |
tree | f73df467182529f27c7a9c154202a3498dd5f792 /arch | |
parent | 90eed7d87b748f9c0d11b9bad64a4c41e31b78c4 (diff) | |
parent | 89d71486b293565aa345e1b722647cb29ade465c (diff) | |
download | linux-3.10-a3fd869a6425082f6014ded43684508602319900.tar.gz linux-3.10-a3fd869a6425082f6014ded43684508602319900.tar.bz2 linux-3.10-a3fd869a6425082f6014ded43684508602319900.zip |
Merge branches 'sh/urgent' and 'sh/regulator' into sh-latest
Diffstat (limited to 'arch')
-rw-r--r-- | arch/sh/boards/Kconfig | 13 | ||||
-rw-r--r-- | arch/sh/boards/board-apsh4a3a.c | 10 | ||||
-rw-r--r-- | arch/sh/boards/board-apsh4ad0a.c | 10 | ||||
-rw-r--r-- | arch/sh/boards/board-magicpanelr2.c | 10 | ||||
-rw-r--r-- | arch/sh/boards/board-polaris.c | 10 | ||||
-rw-r--r-- | arch/sh/boards/board-sh2007.c | 12 | ||||
-rw-r--r-- | arch/sh/boards/board-sh7757lcr.c | 14 | ||||
-rw-r--r-- | arch/sh/boards/mach-ap325rxa/setup.c | 21 | ||||
-rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 117 | ||||
-rw-r--r-- | arch/sh/boards/mach-kfr2r09/setup.c | 12 | ||||
-rw-r--r-- | arch/sh/boards/mach-migor/setup.c | 13 | ||||
-rw-r--r-- | arch/sh/boards/mach-rsk/setup.c | 10 | ||||
-rw-r--r-- | arch/sh/boards/mach-sdk7786/setup.c | 10 | ||||
-rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 15 |
14 files changed, 260 insertions, 17 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 7048c03490d..fb5805745ac 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -57,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -140,6 +141,7 @@ config SH_RSK bool "Renesas Starter Kit" depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. @@ -159,6 +161,7 @@ config SH_SDK7786 select NO_IOPORT if !PCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_SRAM_POOL + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -173,6 +176,7 @@ config SH_SH7757LCR bool "SH7757LCR" depends on CPU_SUBTYPE_SH7757 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config SH_SH7785LCR bool "SH7785LCR" @@ -206,6 +210,7 @@ config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -214,6 +219,7 @@ config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -222,6 +228,7 @@ config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. @@ -230,6 +237,7 @@ config SH_ECOVEC depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_DA7210 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -305,6 +313,7 @@ config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -316,6 +325,7 @@ config SH_CAYMAN config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board @@ -323,6 +333,7 @@ config SH_POLARIS config SH_SH2007 bool "SH-2007 board" select NO_IOPORT + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7780 help SH-2007 is a single-board computer based around SH7780 chip @@ -334,6 +345,7 @@ config SH_SH2007 config SH_APSH4A3A bool "AP-SH4A-3A" select SH_ALPHA_BOARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7785 help Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. @@ -342,6 +354,7 @@ config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD select SYS_SUPPORTS_PCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c index 2823619c600..0a39c241628 100644 --- a/arch/sh/boards/board-apsh4a3a.c +++ b/arch/sh/boards/board-apsh4a3a.c @@ -13,6 +13,8 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> @@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = { .resource = nor_flash_resources, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = { static int __init apsh4a3a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4a3a_devices, ARRAY_SIZE(apsh4a3a_devices)); } diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c index b4d6292a924..92eac3a9918 100644 --- a/arch/sh/boards/board-apsh4ad0a.c +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -12,12 +12,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> #include <asm/machvec.h> #include <asm/sizes.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = { static int __init apsh4ad0a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4ad0a_devices, ARRAY_SIZE(apsh4ad0a_devices)); } diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 90568f9de3a..20500858b56 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,6 +14,8 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -24,6 +26,12 @@ #include <asm/heartbeat.h> #include <cpu/sh7720.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ @@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 0978ae2e484..37a08d09472 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -9,6 +9,8 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <asm/irq.h> @@ -22,6 +24,12 @@ #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -88,6 +96,8 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c index b90b78f6a82..1980bb7e578 100644 --- a/arch/sh/boards/board-sh2007.c +++ b/arch/sh/boards/board-sh2007.c @@ -6,6 +6,8 @@ */ #include <linux/init.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> @@ -13,6 +15,14 @@ #include <asm/machvec.h> #include <mach/sh2007.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + struct smsc911x_platform_config smc911x_info = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = { static int __init sh2007_io_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); return 0; } diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 5087f8bb4cf..41f86702eb9 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -12,6 +12,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/io.h> @@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = { static int __init sh7757lcr_devices_setup(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* RGMII (PTA) */ gpio_request(GPIO_FN_ET0_MDC, NULL); gpio_request(GPIO_FN_ET0_MDIO, NULL); diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index f33ebf44707..9e963c1d144 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -20,6 +20,8 @@ #include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/videodev2.h> @@ -34,6 +36,12 @@ #include <asm/suspend.h> #include <cpu/sh7723.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -423,6 +431,15 @@ static struct platform_device ceu_device = { }, }; +/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", @@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void) &ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 4158d70c0de..a06c5c8a14a 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> @@ -518,10 +520,86 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +static struct regulator_consumer_supply cn12_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; + static void sdhi0_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB6, NULL); + if (!ret) { + power_gpio = GPIO_PTB6; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB6, state); } @@ -562,13 +640,27 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) +static void cn12_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB7, NULL); + if (!ret) { + power_gpio = GPIO_PTB7; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB7, state); } +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static int sdhi1_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PTW7); @@ -579,7 +671,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .set_pwr = sdhi1_set_pwr, + .set_pwr = cn12_set_pwr, .get_cd = sdhi1_get_cd, }; @@ -899,14 +991,9 @@ static struct platform_device vou_device = { #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SH_MMCIF */ -static void mmcif_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - static void mmcif_down_pwr(struct platform_device *pdev) { - gpio_set_value(GPIO_PTB7, 0); + cn12_set_pwr(pdev, 0); } static struct resource sh_mmcif_resources[] = { @@ -929,7 +1016,7 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_plat_data sh_mmcif_plat = { - .set_pwr = mmcif_set_pwr, + .set_pwr = cn12_set_pwr, .down_pwr = mmcif_down_pwr, .sup_pclk = 0, /* SH7724: Max Pclk/2 */ .caps = MMC_CAP_4_BIT_DATA | @@ -960,7 +1047,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -1258,8 +1347,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1288,8 +1375,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); cn12_enabled = true; #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1301,8 +1386,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); /* Card-detect, used on CN12 with SDHI1 */ gpio_request(GPIO_PTW7, NULL); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 43a179ce9af..f2a4304fbe2 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -21,6 +21,8 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/videodev2.h> #include <linux/sh_intc.h> @@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index a8a1ca741c8..8b73194ed2c 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -17,6 +17,8 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/delay.h> #include <linux/clk.h> @@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", @@ -498,6 +507,10 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index 895f030070d..2685ea03b06 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -16,9 +16,17 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/machvec.h> #include <asm/io.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition rsk_partitions[] = { @@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = { static int __init rsk_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(rsk_devices, ARRAY_SIZE(rsk_devices)); } diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 27a2314f50a..c29268bfd34 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/i2c.h> #include <linux/irq.h> @@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = { .resource = &heartbeat_resource, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p) { pr_info("Renesas Technology Europe SDK7786 support:\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sdk7786_fpga_init(); sdk7786_nmi_init(); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index ffbf5bc7366..35f6efa3ac0 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -18,6 +18,8 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> @@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", @@ -684,6 +695,10 @@ static int __init devices_setup(void) &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Reset Release */ fpga_out = __raw_readw(FPGA_OUT); /* bit4: NTSC_PDN, bit5: NTSC_RESET */ |