Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...

17 files changed, 26 insertions, 26 deletions

diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
index 08c60ff227b..5a03e7ccb01 100644
--- a/arch/arm/mach-netx/include/mach/netx-regs.h
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -80,7 +80,7 @@
 #define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
 #define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
 
-/* virual addresses */
+/* virtual addresses */
 #define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
 #define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
 #define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 3f325d3718a..cd8de89c5fa 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -109,7 +109,7 @@ config MACH_OMAP_PALMZ71
 	help
 	 Support for the Palm Zire71 PDA. To boot the kernel,
 	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more informations.
+	 http://hackndev.com/palm/z71 for more information.
 	 Say Y here if you have such a PDA, say N otherwise.
 
 config MACH_OMAP_PALMTT
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 05fe3053dca..414a8ad97f5 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -127,13 +127,13 @@ config BOARD_HAMMERHEAD
 	select CPU_AT32AP7000
 	select USB_ARCH_HAS_HCD
 	help
-	  The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel.
+	  The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel.
 	  It offers versatile peripherals, such as ethernet, usb device, usb host etc.
 
-	  The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered
+	  The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered
 	  Device (PD).
 
-	  Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
+	  Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
 	  mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which
 	  will cover even the most exceptional need of memory bandwidth. Together with the onboard
 	  video decoder the board is ready for video processing.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 0c1f86e3e44..3640cdc38aa 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -777,7 +777,7 @@ config CACHELINE_ALIGNED_L1
 	default n if BF54x
 	depends on !BF531
 	help
-	  If enabled, cacheline_anligned data is linked
+	  If enabled, cacheline_aligned data is linked
 	  into L1 data memory. (less latency)
 
 config SYSCALL_TAB_L1
@@ -957,7 +957,7 @@ config MPU
 	  memory they do not own.  This comes at a performance penalty
 	  and is recommended only for debugging.
 
-comment "Asynchonous Memory Configuration"
+comment "Asynchronous Memory Configuration"
 
 menu "EBIU_AMGCTL Global Control"
 config C_AMCKEN
@@ -989,7 +989,7 @@ config C_B3PEN
 	default n
 
 choice
-	prompt"Enable Asynchonous Memory Banks"
+	prompt "Enable Asynchronous Memory Banks"
 	default C_AMBEN_ALL
 
 config C_AMBEN
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 3462245fe9f..7adac388a77 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -438,7 +438,7 @@ config ETRAX_SERIAL_PORT0_DMA1_IN
 	help
 	  Enables the DMA1 input channel for ser0 (ttyS0).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
@@ -565,7 +565,7 @@ config ETRAX_SERIAL_PORT2_DMA7_IN
 	help
 	  Enables the DMA7 input channel for ser2 (ttyS2).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
@@ -604,7 +604,7 @@ config ETRAX_SERIAL_PORT3_DMA3_IN
 	help
 	  Enables the DMA3 input channel for ser3 (ttyS3).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 005ed2b3f7f..21bbd93be34 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -28,7 +28,7 @@ config	ETRAX_NBR_LED_GRP_ONE
 	help
 	  Select this if you want one Ethernet LED group. This LED group
 	  can be used for one or more Ethernet interfaces. However, it is
-	  recomended that each Ethernet interface use a dedicated LED group.
+	  recommended that each Ethernet interface use a dedicated LED group.
 
 config	ETRAX_NBR_LED_GRP_TWO
 	bool "Use two LED groups"
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 7a64fcef9d0..b9e328e688b 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -342,7 +342,7 @@ config ETRAX_SERIAL_PORT4_DMA9_IN
 	help
 	  Enables the DMA9 input channel for ser4 (ttyS4).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index f6d74475f1c..774de82abef 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -59,7 +59,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
 	depends on ETRAX_ARCH_V32
 	default "0"
 	help
-	  SDRAM configuration for group 1. The defult value is 0
+	  SDRAM configuration for group 1. The default value is 0
 	  because group 1 is not used in the default configuration,
 	  described in the help for SDRAM_GRP0_CONFIG.
 
diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
index ad383caae19..e7c6e614a75 100644
--- a/arch/h8300/kernel/timer/tpu.c
+++ b/arch/h8300/kernel/timer/tpu.c
@@ -67,7 +67,7 @@ static struct irqaction tpu_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-const static int __initdata divide_rate[] = {
+static const int __initdata divide_rate[] = {
 #if CONFIG_H8300_TPU_CH == 0
 	1,4,16,64,0,0,0,0,
 #elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dc787190430..998e5db8cc0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -134,7 +134,7 @@ config MACH_JAZZ
 	help
 	 This a family of machines based on the MIPS R4030 chipset which was
 	 used by several vendors to build RISC/os and Windows NT workstations.
-	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
 	 Olivetti M700-10 workstations.
 
 config LASAT
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 5b47d6b6527..cbcd7eb83bd 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -221,7 +221,7 @@ static void __init ip27_smp_setup(void)
 	 * Assumption to be fixed: we're always booted on logical / physical
 	 * processor 0.  While we're always running on logical processor 0
 	 * this still means this is physical processor zero; it might for
-	 * example be disabled in the firwware.
+	 * example be disabled in the firmware.
 	 */
 	alloc_cpupda(0, 0);
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 45192dce65c..9e08d8a69fd 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -346,7 +346,7 @@ config PHYP_DUMP
 	help
 	  Hypervisor-assisted dump is meant to be a kdump replacement
 	  offering robustness and speed not possible without system
-	  hypervisor assistence.
+	  hypervisor assistance.
 
 	  If unsure, say "N"
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index ffa2a9fd53d..e3e87078d03 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -293,7 +293,7 @@ config CPM
 config OF_RTC
 	bool
 	help
-	  Uses information from the OF or flattened device tree to instatiate
+	  Uses information from the OF or flattened device tree to instantiate
 	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 0b192a1c429..29e427085ef 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -9,8 +9,8 @@ config PPC_BESTCOMM
 	select PPC_LIB_RHEAP
 	help
 	  BestComm is the name of the communication coprocessor found
-	  on the Freescale MPC5200 family of processor. It's usage is
-	  optionnal for some drivers (like ATA), but required for
+	  on the Freescale MPC5200 family of processor.  Its usage is
+	  optional for some drivers (like ATA), but required for
 	  others (like FEC).
 
 	  If you want to use drivers that require DMA operations,
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8d50d527c59..2d52b515c24 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -640,10 +640,10 @@ config GUSA_RB
 	depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
 	help
 	  Enabling this option will allow the kernel to implement some
-	  atomic operations using a software implemention of load-locked/
+	  atomic operations using a software implementation of load-locked/
 	  store-conditional (LLSC). On machines which do not have hardware
 	  LLSC, this should be more efficient than the other alternative of
-	  disabling insterrupts around the atomic sequence.
+	  disabling interrupts around the atomic sequence.
 
 endmenu
 
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index a46c3a21e26..3a1b7bf03cf 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -686,7 +686,7 @@ tlb_fixup_done:
 	 * point.
 	 *
 	 * There used to be enormous complexity wrt. transferring
-	 * over from the firwmare's trap table to the Linux kernel's.
+	 * over from the firmware's trap table to the Linux kernel's.
 	 * For example, there was a chicken & egg problem wrt. building
 	 * the OBP page tables, yet needing to be on the Linux kernel
 	 * trap table (to translate PAGE_OFFSET addresses) in order to
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 3f27e5c0c9c..5696cec7b4b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1144,7 +1144,7 @@ config NODES_SHIFT
 	depends on NEED_MULTIPLE_NODES
 	---help---
 	  Specify the maximum number of NUMA Nodes available on the target
-	  system.  Increases memory reserved to accomodate various tables.
+	  system.  Increases memory reserved to accommodate various tables.
 
 config HAVE_ARCH_BOOTMEM
 	def_bool y
@@ -1322,7 +1322,7 @@ config MTRR_SANITIZER
 	  add writeback entries.
 
 	  Can be disabled with disable_mtrr_cleanup on the kernel command line.
-	  The largest mtrr entry size for a continous block can be set with
+	  The largest mtrr entry size for a continuous block can be set with
 	  mtrr_chunk_size.
 
 	  If unsure, say Y.