Fix trivial typos in Kconfig* files

Fix several typos in help text in Kconfig* files.

Signed-off-by: David Sterba <dave@jikos.cz>
Signed-off-by: Adrian Bunk <bunk@stusta.de>

8 files changed, 12 insertions, 12 deletions

diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index f64624fc450..1d859c16931 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -603,7 +603,7 @@ config ETRAX_CARDBUS
         select HOTPLUG
         select PCCARD_NONSTATIC
         help
-	 Enabled the ETRAX Carbus driver.
+	 Enabled the ETRAX Cardbus driver.
 
 config PCI
        bool
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
index e0e9bcb015a..554efe604a0 100644
--- a/arch/h8300/Kconfig.debug
+++ b/arch/h8300/Kconfig.debug
@@ -21,12 +21,12 @@ config GDB_MAGICPRINT
 	bool "Message Output for GDB MagicPrint service"
 	depends on (H8300H_SIM || H8S_SIM)
 	help
-	  kernel messages output useing MagicPrint service from GDB
+	  kernel messages output using MagicPrint service from GDB
 
 config SYSCALL_PRINT
 	bool "SystemCall trace print"
 	help
-	  outout history of systemcall
+	  output history of systemcall
 
 config GDB_DEBUG
    	bool "Use gdb stub"
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
index dce6124cb84..d7f6fb0b30f 100644
--- a/arch/i386/Kconfig.cpu
+++ b/arch/i386/Kconfig.cpu
@@ -108,7 +108,7 @@ config MCORE2
 	bool "Core 2/newer Xeon"
 	help
 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-	  CPUs. You can distingush newer from older Xeons by the CPU family
+	  CPUs. You can distinguish newer from older Xeons by the CPU family
 	  in /proc/cpuinfo. Newer ones have 6.
 
 config MPENTIUM4
@@ -172,7 +172,7 @@ config MWINCHIP3D
 	help
 	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
-	  and alignment reqirements.  Also enable out of order memory
+	  and alignment requirements.  Also enable out of order memory
 	  stores for this CPU, which can increase performance of some
 	  operations.
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index e23af4b6ae8..6e41471449c 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -468,7 +468,7 @@ config KEXEC
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is indepedent of the system firmware.   And like a reboot
+	  but it is independent of the system firmware.   And like a reboot
 	  you can start any kernel with it, not just Linux.
 
 	  The name comes from the similiarity to the exec system call.
diff --git a/arch/m68knommu/Kconfig.debug b/arch/m68knommu/Kconfig.debug
index 763c9aa0b4f..9ff47bd09ae 100644
--- a/arch/m68knommu/Kconfig.debug
+++ b/arch/m68knommu/Kconfig.debug
@@ -5,7 +5,7 @@ source "lib/Kconfig.debug"
 config FULLDEBUG
 	bool "Full Symbolic/Source Debugging support"
 	help
-	  Enable debuging symbols on kernel build.
+	  Enable debugging symbols on kernel build.
 
 config HIGHPROFILE
 	bool "Use fast second timer for profiling"
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b7cb048bc77..16ecea3c081 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -956,7 +956,7 @@ choice
 	  byte order. These modes require different kernels and a different
 	  Linux distribution.  In general there is one preferred byteorder for a
 	  particular system but some systems are just as commonly used in the
-	  one or the other endianess.
+	  one or the other endianness.
 
 config CPU_BIG_ENDIAN
 	bool "Big endian"
@@ -1750,7 +1750,7 @@ config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default y if SGI_IP27
 	help
-	  Say Y to upport efficient handling of discontiguous physical memory,
+	  Say Y to support efficient handling of discontiguous physical memory,
 	  for architectures which are either NUMA (Non-Uniform Memory Access)
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
@@ -1938,7 +1938,7 @@ config KEXEC
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is indepedent of the system firmware.   And like a reboot
+	  but it is independent of the system firmware.   And like a reboot
 	  you can start any kernel with it, not just Linux.
 
 	  The name comes from the similiarity to the exec system call.
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index f70e795c262..346cd3befe1 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -32,7 +32,7 @@ config HCALL_STATS
 	depends on PPC_PSERIES && DEBUG_FS
 	help
 	  Adds code to keep track of the number of hypervisor calls made and
-	  the amount of time spent in hypervisor callsr.  Wall time spent in
+	  the amount of time spent in hypervisor calls.  Wall time spent in
 	  each call is always calculated, and if available CPU cycles spent
 	  are also calculated.  A directory named hcall_inst is added at the
 	  root of the debugfs filesystem.  Within the hcall_inst directory
diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig
index 99ff9f08e4d..d1defbbfcd8 100644
--- a/arch/s390/crypto/Kconfig
+++ b/arch/s390/crypto/Kconfig
@@ -54,7 +54,7 @@ config S390_PRNG
 	default "m"
 	help
 	  Select this option if you want to use the s390 pseudo random number
-	  generator. The PRNG is part of the cryptograhic processor functions
+	  generator. The PRNG is part of the cryptographic processor functions
 	  and uses triple-DES to generate secure random numbers like the
 	  ANSI X9.17 standard. The PRNG is usable via the char device
 	  /dev/prandom.