x86: move i386 and x86_64 Kconfig files to x86 directory

After a small change in kconfig Makefile we could
move all x86 Kconfig files to x86 directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 372 insertions, 0 deletions

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
new file mode 100644
index 00000000000..0e2adadf590
--- /dev/null
+++ b/arch/x86/Kconfig.cpu
@@ -0,0 +1,372 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+
+choice
+	prompt "Processor family"
+	default M686
+
+config M386
+	bool "386"
+	depends on !UML
+	---help---
+	  This is the processor type of your CPU. This information is used for
+	  optimizing purposes. In order to compile a kernel that can run on
+	  all x86 CPU types (albeit not optimally fast), you can specify
+	  "386" here.
+
+	  The kernel will not necessarily run on earlier architectures than
+	  the one you have chosen, e.g. a Pentium optimized kernel will run on
+	  a PPro, but not necessarily on a i486.
+
+	  Here are the settings recommended for greatest speed:
+	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
+	  will run on a 386 class machine.
+	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+	  - "586" for generic Pentium CPUs lacking the TSC
+	  (time stamp counter) register.
+	  - "Pentium-Classic" for the Intel Pentium.
+	  - "Pentium-MMX" for the Intel Pentium MMX.
+	  - "Pentium-Pro" for the Intel Pentium Pro.
+	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+	  - "Crusoe" for the Transmeta Crusoe series.
+	  - "Efficeon" for the Transmeta Efficeon series.
+	  - "Winchip-C6" for original IDT Winchip.
+	  - "Winchip-2" for IDT Winchip 2.
+	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+	  - "Geode GX/LX" For AMD Geode GX and LX processors.
+	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+	  - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
+	  - "VIA C7" for VIA C7.
+
+	  If you don't know what to do, choose "386".
+
+config M486
+	bool "486"
+	help
+	  Select this for a 486 series processor, either Intel or one of the
+	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
+	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+	  U5S.
+
+config M586
+	bool "586/K5/5x86/6x86/6x86MX"
+	help
+	  Select this for an 586 or 686 series processor such as the AMD K5,
+	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
+	  assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+	bool "Pentium-Classic"
+	help
+	  Select this for a Pentium Classic processor with the RDTSC (Read
+	  Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+	bool "Pentium-MMX"
+	help
+	  Select this for a Pentium with the MMX graphics/multimedia
+	  extended instructions.
+
+config M686
+	bool "Pentium-Pro"
+	help
+	  Select this for Intel Pentium Pro chips.  This enables the use of
+	  Pentium Pro extended instructions, and disables the init-time guard
+	  against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+	bool "Pentium-II/Celeron(pre-Coppermine)"
+	help
+	  Select this for Intel chips based on the Pentium-II and
+	  pre-Coppermine Celeron core.  This option enables an unaligned
+	  copy optimization, compiles the kernel with optimization flags
+	  tailored for the chip, and applies any applicable Pentium Pro
+	  optimizations.
+
+config MPENTIUMIII
+	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	help
+	  Select this for Intel chips based on the Pentium-III and
+	  Celeron-Coppermine core.  This option enables use of some
+	  extended prefetch instructions in addition to the Pentium II
+	  extensions.
+
+config MPENTIUMM
+	bool "Pentium M"
+	help
+	  Select this for Intel Pentium M (not Pentium-4 M)
+	  notebook chips.
+
+config MCORE2
+	bool "Core 2/newer Xeon"
+	help
+	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+	  CPUs. You can distinguish newer from older Xeons by the CPU family
+	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+config MPENTIUM4
+	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+	help
+	  Select this for Intel Pentium 4 chips.  This includes the
+	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
+	  Pentium-4 M (not Pentium M) chips.  This option enables compile
+	  flags optimized for the chip, uses the correct cache line size, and
+	  applies any applicable optimizations.
+
+	  CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 )
+
+	  Select this for:
+	    Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename:
+		-Willamette
+		-Northwood
+		-Mobile Pentium 4
+		-Mobile Pentium 4 M
+		-Extreme Edition (Gallatin)
+		-Prescott
+		-Prescott 2M
+		-Cedar Mill
+		-Presler
+		-Smithfiled
+	    Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename:
+		-Foster
+		-Prestonia
+		-Gallatin
+		-Nocona
+		-Irwindale
+		-Cranford
+		-Potomac
+		-Paxville
+		-Dempsey
+
+
+config MK6
+	bool "K6/K6-II/K6-III"
+	help
+	  Select this for an AMD K6-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK7
+	bool "Athlon/Duron/K7"
+	help
+	  Select this for an AMD Athlon K7-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK8
+	bool "Opteron/Athlon64/Hammer/K8"
+	help
+	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
+	  use of some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MCRUSOE
+	bool "Crusoe"
+	help
+	  Select this for a Transmeta Crusoe processor.  Treats the processor
+	  like a 586 with TSC, and sets some GCC optimization flags (like a
+	  Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+	bool "Efficeon"
+	help
+	  Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+	bool "Winchip-C6"
+	help
+	  Select this for an IDT Winchip C6 chip.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP2
+	bool "Winchip-2"
+	help
+	  Select this for an IDT Winchip-2.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP3D
+	bool "Winchip-2A/Winchip-3"
+	help
+	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.  Also enable out of order memory
+	  stores for this CPU, which can increase performance of some
+	  operations.
+
+config MGEODEGX1
+	bool "GeodeGX1"
+	help
+	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
+
+config MGEODE_LX
+       bool "Geode GX/LX"
+       help
+         Select this for AMD Geode GX and LX processors.
+
+config MCYRIXIII
+	bool "CyrixIII/VIA-C3"
+	help
+	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
+	  treat this chip as a generic 586. Whilst the CPU is 686 class,
+	  it lacks the cmov extension which gcc assumes is present when
+	  generating 686 code.
+	  Note that Nehemiah (Model 9) and above will not boot with this
+	  kernel due to them lacking the 3DNow! instructions used in earlier
+	  incarnations of the CPU.
+
+config MVIAC3_2
+	bool "VIA C3-2 (Nehemiah)"
+	help
+	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+	  of SSE and tells gcc to treat the CPU as a 686.
+	  Note, this kernel will not boot on older (pre model 9) C3s.
+
+config MVIAC7
+	bool "VIA C7"
+	help
+	  Select this for a VIA C7.  Selecting this uses the correct cache
+	  shift and tells gcc to treat the CPU as a 686.
+
+endchoice
+
+config X86_GENERIC
+       bool "Generic x86 support"
+       help
+	  Instead of just including optimizations for the selected
+	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
+	  generic optimizations as well. This will make the kernel
+	  perform better on x86 CPUs other than that selected.
+
+	  This is really intended for distributors who need more
+	  generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+	bool
+	depends on !M386
+	default y
+
+config X86_L1_CACHE_SHIFT
+	int
+	default "7" if MPENTIUM4 || X86_GENERIC
+	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
+	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
+
+config X86_XADD
+	bool
+	depends on !M386
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	depends on !X86_XADD
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	depends on X86_XADD
+	default y
+
+config ARCH_HAS_ILOG2_U32
+	bool
+	default n
+
+config ARCH_HAS_ILOG2_U64
+	bool
+	default n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config X86_PPRO_FENCE
+	bool
+	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+	default y
+
+config X86_F00F_BUG
+	bool
+	depends on M586MMX || M586TSC || M586 || M486 || M386
+	default y
+
+config X86_WP_WORKS_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_INVLPG
+	bool
+	depends on !M386
+	default y
+
+config X86_BSWAP
+	bool
+	depends on !M386
+	default y
+
+config X86_POPAD_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_ALIGNMENT_16
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+	default y
+
+config X86_GOOD_APIC
+	bool
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
+	default y
+
+config X86_INTEL_USERCOPY
+	bool
+	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
+	default y
+
+config X86_USE_PPRO_CHECKSUM
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
+	default y
+
+config X86_USE_3DNOW
+	bool
+	depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
+	default y
+
+config X86_OOSTORE
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+	default y
+
+config X86_TSC
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
+	default y
+
+# this should be set for all -march=.. options where the compiler
+# generates cmov.
+config X86_CMOV
+	bool
+	depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7)
+	default y
+
+config X86_MINIMUM_CPU_FAMILY
+	int
+	default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+	default "3"
+