sh: Add RSK2+SH7269 board

The RSK2+SH7269 board uses the SH7269 processor. It is often
referred to as just rsk7269. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 68 insertions, 1 deletions

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index ee92f429ca2..7ee04984b8f 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -133,7 +133,8 @@ config SH_RTS7751R2D
 
 config SH_RSK
 	bool "Renesas Starter Kit"
-	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7264
+	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
+	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
 	help
 	 Select this option if configuring for any of the RSK+ MCU
 	 evaluation platforms.
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
index 4315af51164..458a11ffd02 100644
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -18,6 +18,11 @@ config SH_RSK7264
 	select ARCH_REQUIRE_GPIOLIB
 	depends on CPU_SUBTYPE_SH7264
 
+config SH_RSK7269
+	bool "RSK2+SH7269"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on CPU_SUBTYPE_SH7269
+
 endchoice
 
 endif
diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile
index bae6ae45aba..6a4e1b538a6 100644
--- a/arch/sh/boards/mach-rsk/Makefile
+++ b/arch/sh/boards/mach-rsk/Makefile
@@ -1,3 +1,4 @@
 obj-y				:= setup.o
 obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o
 obj-$(CONFIG_SH_RSK7264)	+= devices-rsk7264.o
+obj-$(CONFIG_SH_RSK7269)	+= devices-rsk7269.o
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c
new file mode 100644
index 00000000000..4a544591d6f
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/devices-rsk7269.c
@@ -0,0 +1,60 @@
+/*
+ * RSK+SH7269 Support
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 85,
+		.end		= 85,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *rsk7269_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init rsk7269_devices_setup(void)
+{
+	return platform_add_devices(rsk7269_devices,
+				    ARRAY_SIZE(rsk7269_devices));
+}
+device_initcall(rsk7269_devices_setup);