Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 67 insertions, 0 deletions

diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h
new file mode 100644
index 00000000000..90f0cb2d409
--- /dev/null
+++ b/arch/ppc/platforms/pplus.h
@@ -0,0 +1,67 @@
+/*
+ * arch/ppc/platforms/pplus.h
+ *
+ * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
+ *
+ * Author: Mark A. Greerinclude/asm-ppc/hawk.h
+ *         mgreer@mvista.com
+ *
+ * Modified by Randy Vinson (rvinson@mvista.com)
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PPC_PPLUS_H
+#define __PPC_PPLUS_H
+
+#include <asm/io.h>
+
+/*
+ * Due to limiations imposed by legacy hardware (primaryily IDE controllers),
+ * the PPLUS boards operate using a PReP address map.
+ *
+ * From Processor (physical) -> PCI:
+ *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
+ *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
+ *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
+ *
+ * From PCI -> Processor (physical):
+ *   System Memory: 0x80000000 -> 0x00000000
+ */
+
+#define PPLUS_ISA_MEM_BASE		PREP_ISA_MEM_BASE
+#define PPLUS_ISA_IO_BASE		PREP_ISA_IO_BASE
+
+/* PCI Memory space mapping info */
+#define PPLUS_PCI_MEM_SIZE		0x30000000U
+#define PPLUS_PROC_PCI_MEM_START	PPLUS_ISA_MEM_BASE
+#define PPLUS_PROC_PCI_MEM_END		(PPLUS_PROC_PCI_MEM_START +	\
+					 PPLUS_PCI_MEM_SIZE - 1)
+#define PPLUS_PCI_MEM_START		0x00000000U
+#define PPLUS_PCI_MEM_END		(PPLUS_PCI_MEM_START +	\
+					 PPLUS_PCI_MEM_SIZE - 1)
+
+/* PCI I/O space mapping info */
+#define PPLUS_PCI_IO_SIZE		0x10000000U
+#define PPLUS_PROC_PCI_IO_START		PPLUS_ISA_IO_BASE
+#define PPLUS_PROC_PCI_IO_END		(PPLUS_PROC_PCI_IO_START +	\
+					 PPLUS_PCI_IO_SIZE - 1)
+#define PPLUS_PCI_IO_START		0x00000000U
+#define PPLUS_PCI_IO_END		(PPLUS_PCI_IO_START + 	\
+					 PPLUS_PCI_IO_SIZE - 1)
+/* System memory mapping info */
+#define PPLUS_PCI_DRAM_OFFSET		PREP_PCI_DRAM_OFFSET
+#define PPLUS_PCI_PHY_MEM_OFFSET	(PPLUS_ISA_MEM_BASE-PPLUS_PCI_MEM_START)
+
+/* Define base addresses for important sets of registers */
+#define PPLUS_HAWK_SMC_BASE		0xfef80000U
+#define PPLUS_HAWK_PPC_REG_BASE		0xfeff0000U
+#define PPLUS_SYS_CONFIG_REG		0xfef80400U
+#define PPLUS_L2_CONTROL_REG		0x8000081cU
+
+#define PPLUS_VGA_MEM_BASE		0xf0000000U
+
+#endif	/* __PPC_PPLUS_H */