diff options
author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-04-02 13:34:00 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-04-02 13:34:00 -0700 |
commit | 1810b6cb162e0c19e0ecbbacbcfd66f578f335ec (patch) | |
tree | 810494ca945483bf669a062d445d49d3bfb7d6a7 /arch/arm | |
parent | ef7a4567dc542d8cc563755478464ea928fede41 (diff) | |
parent | 9b6553cd01ce3ea7a6a532f7b7e62e3535d6b102 (diff) | |
download | linux-3.10-1810b6cb162e0c19e0ecbbacbcfd66f578f335ec.tar.gz linux-3.10-1810b6cb162e0c19e0ecbbacbcfd66f578f335ec.tar.bz2 linux-3.10-1810b6cb162e0c19e0ecbbacbcfd66f578f335ec.zip |
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (27 commits)
[ARM] 3433/1: ARM: OMAP: 8/8 Update board files
[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2
[ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2
[ARM] 3430/1: ARM: OMAP: 5/8 Update PM
[ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO
[ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexing
[ARM] 3427/1: ARM: OMAP: 2/8 Update timers
[ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework
[ARM] 3396/2: AT91RM9200 Platform devices update
[ARM] 3395/2: AT91RM9200 Dataflash Card vs MMC selection
[ARM] 3393/2: AT91RM9200 LED support
[ARM] 3453/1: Poodle: Correctly set the memory size
[ARM] 3446/1: i.MX: MMC/SD SDHC controller registration for i.MX/MX1 MX1ADS board
[ARM] 3444/1: i.MX: Scatter-gather DMA emulation for i.MX/MX1
[ARM] 3451/1: ep93xx: use the m48t86 rtc driver on the ts72xx platform
[ARM] 3450/1: ep93xx: use the ep93xx rtc driver
[ARM] 3452/1: [S3C2410] RX3715 - add nand information
[ARM] 3449/1: [S3C2410] Anubis - fix NAND timings
[ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLL
[ARM] 3442/1: [S3C2410] SMDK: NAND device setup
...
Diffstat (limited to 'arch/arm')
83 files changed, 5566 insertions, 895 deletions
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 1fe73d19888..9e1c1cceb73 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -379,7 +379,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_AT91_DATAFLASH=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # # NAND Flash Device Drivers diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index b7d934cdb1b..6e0805a971d 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -370,7 +370,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_AT91_DATAFLASH=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # # NAND Flash Device Drivers diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 1574941ebfe..ee083b3f052 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -100,23 +100,12 @@ EXPORT_SYMBOL(__raw_writesl); #endif /* string / mem functions */ -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); EXPORT_SYMBOL(strpbrk); EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strstr); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memscan); EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(__memzero); @@ -190,8 +179,6 @@ EXPORT_SYMBOL(_find_next_bit_be); /* syscalls */ EXPORT_SYMBOL(sys_write); -EXPORT_SYMBOL(sys_read); EXPORT_SYMBOL(sys_lseek); -EXPORT_SYMBOL(sys_open); EXPORT_SYMBOL(sys_exit); EXPORT_SYMBOL(sys_wait4); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b7cd280bfd6..43752840395 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -252,6 +252,9 @@ static void __init dump_cpu_info(int cpu) dump_cache("cache", cpu, CACHE_ISIZE(info)); } } + + if (arch_is_coherent()) + printk("Cache coherency enabled\n"); } int cpu_architecture(void) diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index 75e6ee318de..ef88c4128ed 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -16,11 +16,12 @@ obj-$(CONFIG_MACH_CSB637) += board-csb637.o #obj-$(CONFIG_MACH_KB9200) += board-kb9202.o # LEDs support -#led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o -#led-$(CONFIG_MACH_AT91RM9200EK) += leds.o -#led-$(CONFIG_MACH_CSB337) += leds.o -#led-$(CONFIG_MACH_CSB637) += leds.o +led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o +led-$(CONFIG_MACH_AT91RM9200EK) += leds.o +led-$(CONFIG_MACH_CSB337) += leds.o +led-$(CONFIG_MACH_CSB637) += leds.o #led-$(CONFIG_MACH_KB9200) += leds.o +#led-$(CONFIG_MACH_KAFA) += leds.o obj-$(CONFIG_LEDS) += $(led-y) # VGA support diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index 54022e58d50..f45104ceea8 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -67,6 +67,9 @@ static void __init csb337_map_io(void) /* Initialize clocks: 3.6864 MHz crystal */ at91_clock_init(3686400); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = CSB337_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c index 8195f9d919e..f2c2d6e79bc 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -67,6 +67,9 @@ static void __init csb637_map_io(void) /* Initialize clocks: 3.6864 MHz crystal */ at91_clock_init(3686400); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = CSB637_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index 8a783368366..2d7200ed66e 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -70,6 +70,9 @@ static void __init dk_map_io(void) /* Initialize clocks: 18.432 MHz crystal */ at91_clock_init(18432000); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = DK_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); @@ -118,9 +121,14 @@ static void __init dk_board_init(void) at91_add_device_udc(&dk_udc_data); /* Compact Flash */ at91_add_device_cf(&dk_cf_data); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB7, 0); +#else /* MMC */ - at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */ + at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&dk_mmc_data); +#endif /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index fd0752eba89..80d90f5135a 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -70,6 +70,9 @@ static void __init ek_map_io(void) /* Initialize clocks: 18.432 MHz crystal */ at91_clock_init(18432000); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = EK_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); @@ -111,9 +114,14 @@ static void __init ek_board_init(void) at91_add_device_usbh(&ek_usbh_data); /* USB Device */ at91_add_device_udc(&ek_udc_data); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB22, 0); +#else /* MMC */ - at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */ + at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&ek_mmc_data); +#endif /* VGA */ // ek_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 57eedd5beaf..1781b8f342c 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -28,10 +28,10 @@ static u64 ohci_dmamask = 0xffffffffUL; static struct at91_usbh_data usbh_data; -static struct resource at91rm9200_usbh_resource[] = { +static struct resource at91_usbh_resource[] = { [0] = { .start = AT91_UHP_BASE, - .end = AT91_UHP_BASE + SZ_1M -1, + .end = AT91_UHP_BASE + SZ_1M - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -49,8 +49,8 @@ static struct platform_device at91rm9200_usbh_device = { .coherent_dma_mask = 0xffffffff, .platform_data = &usbh_data, }, - .resource = at91rm9200_usbh_resource, - .num_resources = ARRAY_SIZE(at91rm9200_usbh_resource), + .resource = at91_usbh_resource, + .num_resources = ARRAY_SIZE(at91_usbh_resource), }; void __init at91_add_device_usbh(struct at91_usbh_data *data) @@ -121,6 +121,19 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} static u64 eth_dmamask = 0xffffffffUL; static struct at91_eth_data eth_data; +static struct resource at91_eth_resources[] = { + [0] = { + .start = AT91_BASE_EMAC, + .end = AT91_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_EMAC, + .end = AT91_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device at91rm9200_eth_device = { .name = "at91_ether", .id = -1, @@ -129,7 +142,8 @@ static struct platform_device at91rm9200_eth_device = { .coherent_dma_mask = 0xffffffff, .platform_data = ð_data, }, - .num_resources = 0, + .resource = at91_eth_resources, + .num_resources = ARRAY_SIZE(at91_eth_resources), }; void __init at91_add_device_eth(struct at91_eth_data *data) @@ -224,15 +238,20 @@ static u64 mmc_dmamask = 0xffffffffUL; static struct at91_mmc_data mmc_data; static struct resource at91_mmc_resources[] = { - { + [0] = { .start = AT91_BASE_MCI, .end = AT91_BASE_MCI + SZ_16K - 1, .flags = IORESOURCE_MEM, - } + }, + [1] = { + .start = AT91_ID_MCI, + .end = AT91_ID_MCI, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device at91rm9200_mmc_device = { - .name = "at91rm9200_mci", + .name = "at91_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -290,4 +309,123 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) void __init at91_add_device_mmc(struct at91_mmc_data *data) {} #endif +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +static struct resource at91_nand_resources[] = { + { + .start = AT91_SMARTMEDIA_BASE, + .end = AT91_SMARTMEDIA_BASE + SZ_8M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = at91_nand_resources, + .num_resources = ARRAY_SIZE(at91_nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + if (!data) + return; + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */ + + nand_data = *data; + platform_device_register(&at91_nand_device); +} +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +static struct platform_device at91rm9200_twi_device = { + .name = "at91_i2c", + .id = -1, + .num_resources = 0, +}; + +void __init at91_add_device_i2c(void) +{ + /* pins used for TWI interface */ + at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PA25, 1); + + at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PA26, 1); + + platform_device_register(&at91rm9200_twi_device); +} +#else +void __init at91_add_device_i2c(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTC + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_RTC) || defined(CONFIG_AT91_RTC_MODULE) +static struct platform_device at91rm9200_rtc_device = { + .name = "at91_rtc", + .id = -1, + .num_resources = 0, +}; + +void __init at91_add_device_rtc(void) +{ + platform_device_register(&at91rm9200_rtc_device); +} +#else +void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +u8 at91_leds_cpu; +u8 at91_leds_timer; + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} + +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + + /* -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91rm9200/leds.c b/arch/arm/mach-at91rm9200/leds.c new file mode 100644 index 00000000000..28150e8905b --- /dev/null +++ b/arch/arm/mach-at91rm9200/leds.c @@ -0,0 +1,100 @@ +/* + * LED driver for Atmel AT91-based boards. + * + * Copyright (C) SAN People (Pty) Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/mach-types.h> +#include <asm/leds.h> +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + + +static inline void at91_led_on(unsigned int led) +{ + at91_set_gpio_value(led, 0); +} + +static inline void at91_led_off(unsigned int led) +{ + at91_set_gpio_value(led, 1); +} + +static inline void at91_led_toggle(unsigned int led) +{ + unsigned long is_off = at91_get_gpio_value(led); + if (is_off) + at91_led_on(led); + else + at91_led_off(led); +} + + +/* + * Handle LED events. + */ +static void at91_leds_event(led_event_t evt) +{ + unsigned long flags; + + local_irq_save(flags); + + switch(evt) { + case led_start: /* System startup */ + at91_led_on(at91_leds_cpu); + break; + + case led_stop: /* System stop / suspend */ + at91_led_off(at91_leds_cpu); + break; + +#ifdef CONFIG_LEDS_TIMER + case led_timer: /* Every 50 timer ticks */ + at91_led_toggle(at91_leds_timer); + break; +#endif + +#ifdef CONFIG_LEDS_CPU + case led_idle_start: /* Entering idle state */ + at91_led_off(at91_leds_cpu); + break; + + case led_idle_end: /* Exit idle state */ + at91_led_on(at91_leds_cpu); + break; +#endif + + default: + break; + } + + local_irq_restore(flags); +} + + +static int __init leds_init(void) +{ + if (!at91_leds_timer || !at91_leds_cpu) + return -ENODEV; + + /* Enable PIO to access the LEDs */ + at91_set_gpio_output(at91_leds_timer, 1); + at91_set_gpio_output(at91_leds_cpu, 1); + + leds_event = at91_leds_event; + + leds_event(led_start); + return 0; +} + +__initcall(leds_init); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 2d892e4daa0..dcd41762538 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -424,6 +424,14 @@ static struct amba_device uart3_device = { .periphid = 0x00041010, }; + +static struct platform_device ep93xx_rtc_device = { + .name = "ep93xx-rtc", + .id = -1, + .num_resources = 0, +}; + + void __init ep93xx_init_devices(void) { unsigned int v; @@ -439,4 +447,6 @@ void __init ep93xx_init_devices(void) amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); amba_device_register(&uart3_device, &iomem_resource); + + platform_device_register(&ep93xx_rtc_device); } diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 777e75daa8a..9be01b0c3f4 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -17,6 +17,8 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/m48t86.h> #include <asm/io.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -39,6 +41,16 @@ static struct map_desc ts72xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), .length = TS72XX_OPTIONS2_SIZE, .type = MT_DEVICE, + }, { + .virtual = TS72XX_RTC_INDEX_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE), + .length = TS72XX_RTC_INDEX_SIZE, + .type = MT_DEVICE, + }, { + .virtual = TS72XX_RTC_DATA_VIRT_BASE, + .pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE), + .length = TS72XX_RTC_DATA_SIZE, + .type = MT_DEVICE, } }; @@ -99,11 +111,38 @@ static void __init ts72xx_map_io(void) } } +static unsigned char ts72xx_rtc_readb(unsigned long addr) +{ + __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); + return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE); +} + +static void ts72xx_rtc_writeb(unsigned char value, unsigned long addr) +{ + __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE); + __raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE); +} + +static struct m48t86_ops ts72xx_rtc_ops = { + .readb = ts72xx_rtc_readb, + .writeb = ts72xx_rtc_writeb, +}; + +static struct platform_device ts72xx_rtc_device = { + .name = "rtc-m48t86", + .id = -1, + .dev = { + .platform_data = &ts72xx_rtc_ops, + }, + .num_resources = 0, +}; + static void __init ts72xx_init_machine(void) { ep93xx_init_devices(); if (board_is_ts7200()) physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL); + platform_device_register(&ts72xx_rtc_device); } MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c index 71a59e19616..4ca51dcf13a 100644 --- a/arch/arm/mach-imx/dma.c +++ b/arch/arm/mach-imx/dma.c @@ -7,11 +7,18 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * 03/03/2004 Sascha Hauer <sascha@saschahauer.de> + * 2004-03-03 Sascha Hauer <sascha@saschahauer.de> * initial version heavily inspired by * linux/arch/arm/mach-pxa/dma.c + * + * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz> + * Changed to support scatter gather DMA + * by taking Russell's code from RiscPC + * */ +#undef DEBUG + #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> @@ -22,69 +29,368 @@ #include <asm/irq.h> #include <asm/hardware.h> #include <asm/dma.h> +#include <asm/arch/imx-dma.h> + +struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; + +/* + * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation + * @dma_ch: i.MX DMA channel number + * @lastcount: number of bytes transferred during last transfer + * + * Functions prepares DMA controller for next sg data chunk transfer. + * The @lastcount argument informs function about number of bytes transferred + * during last block. Zero value can be used for @lastcount to setup DMA + * for the first chunk. + */ +static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount) +{ + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; + unsigned int nextcount; + unsigned int nextaddr; + + if (!imxdma->name) { + printk(KERN_CRIT "%s: called for not allocated channel %d\n", + __FUNCTION__, dma_ch); + return 0; + } + + imxdma->resbytes -= lastcount; + + if (!imxdma->sg) { + pr_debug("imxdma%d: no sg data\n", dma_ch); + return 0; + } + + imxdma->sgbc += lastcount; + if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) { + if ((imxdma->sgcount <= 1) || !imxdma->resbytes) { + pr_debug("imxdma%d: sg transfer limit reached\n", + dma_ch); + imxdma->sgcount=0; + imxdma->sg = NULL; + return 0; + } else { + imxdma->sgcount--; + imxdma->sg++; + imxdma->sgbc = 0; + } + } + nextcount = imxdma->sg->length - imxdma->sgbc; + nextaddr = imxdma->sg->dma_address + imxdma->sgbc; -static struct dma_channel { - char *name; - void (*irq_handler) (int, void *, struct pt_regs *); - void (*err_handler) (int, void *, struct pt_regs *); - void *data; -} dma_channels[11]; + if(imxdma->resbytes < nextcount) + nextcount = imxdma->resbytes; -/* set err_handler to NULL to have the standard info-only error handler */ + if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ) + DAR(dma_ch) = nextaddr; + else + SAR(dma_ch) = nextaddr; + + CNTR(dma_ch) = nextcount; + pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n", + dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch)); + + return nextcount; +} + +/* + * imx_dma_setup_sg_base - scatter-gather DMA emulation + * @dma_ch: i.MX DMA channel number + * @sg: pointer to the scatter-gather list/vector + * @sgcount: scatter-gather list hungs count + * + * Functions sets up i.MX DMA state for emulated scatter-gather transfer + * and sets up channel registers to be ready for the first chunk + */ +static int +imx_dma_setup_sg_base(imx_dmach_t dma_ch, + struct scatterlist *sg, unsigned int sgcount) +{ + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; + + imxdma->sg = sg; + imxdma->sgcount = sgcount; + imxdma->sgbc = 0; + return imx_dma_sg_next(dma_ch, 0); +} + +/** + * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer + * @dma_ch: i.MX DMA channel number + * @dma_address: the DMA/physical memory address of the linear data block + * to transfer + * @dma_length: length of the data block in bytes + * @dev_addr: physical device port address + * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory + * or %DMA_MODE_WRITE from memory to the device + * + * The function setups DMA channel source and destination addresses for transfer + * specified by provided parameters. The scatter-gather emulation is disabled, + * because linear data block + * form the physical address range is transfered. + * Return value: if incorrect parameters are provided -%EINVAL. + * Zero indicates success. + */ int -imx_request_dma(char *name, imx_dma_prio prio, - void (*irq_handler) (int, void *, struct pt_regs *), - void (*err_handler) (int, void *, struct pt_regs *), void *data) +imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, + unsigned int dma_length, unsigned int dev_addr, + dmamode_t dmamode) { - unsigned long flags; - int i, found = 0; + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - /* basic sanity checks */ - if (!name || !irq_handler) + imxdma->sg = NULL; + imxdma->sgcount = 0; + imxdma->dma_mode = dmamode; + imxdma->resbytes = dma_length; + + if (!dma_address) { + printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n", + dma_ch); return -EINVAL; + } - local_irq_save(flags); + if (!dma_length) { + printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n", + dma_ch); + return -EINVAL; + } - /* try grabbing a DMA channel with the requested priority */ - for (i = prio; i < prio + (prio == DMA_PRIO_LOW) ? 8 : 4; i++) { - if (!dma_channels[i].name) { - found = 1; - break; - } + if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { + pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n", + dma_ch, (unsigned int)dma_address, dma_length, + dev_addr); + SAR(dma_ch) = dev_addr; + DAR(dma_ch) = (unsigned int)dma_address; + } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { + pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n", + dma_ch, (unsigned int)dma_address, dma_length, + dev_addr); + SAR(dma_ch) = (unsigned int)dma_address; + DAR(dma_ch) = dev_addr; + } else { + printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n", + dma_ch); + return -EINVAL; } - if (!found) { - /* requested prio group is full, try hier priorities */ - for (i = prio - 1; i >= 0; i--) { - if (!dma_channels[i].name) { - found = 1; - break; - } - } + CNTR(dma_ch) = dma_length; + + return 0; +} + +/** + * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer + * @dma_ch: i.MX DMA channel number + * @sg: pointer to the scatter-gather list/vector + * @sgcount: scatter-gather list hungs count + * @dma_length: total length of the transfer request in bytes + * @dev_addr: physical device port address + * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory + * or %DMA_MODE_WRITE from memory to the device + * + * The function setups DMA channel state and registers to be ready for transfer + * specified by provided parameters. The scatter-gather emulation is set up + * according to the parameters. + * + * The full preparation of the transfer requires setup of more register + * by the caller before imx_dma_enable() can be called. + * + * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes + * + * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx + * + * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical + * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified + * + * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x + * + * The typical setup for %DMA_MODE_WRITE is specified by next options combination + * + * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x + * + * Be carefull there and do not mistakenly mix source and target device + * port sizes constants, they are really different: + * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, + * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 + * + * Return value: if incorrect parameters are provided -%EINVAL. + * Zero indicates success. + */ +int +imx_dma_setup_sg(imx_dmach_t dma_ch, + struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, + unsigned int dev_addr, dmamode_t dmamode) +{ + int res; + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; + + imxdma->sg = NULL; + imxdma->sgcount = 0; + imxdma->dma_mode = dmamode; + imxdma->resbytes = dma_length; + + if (!sg || !sgcount) { + printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n", + dma_ch); + return -EINVAL; + } + + if (!sg->length) { + printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n", + dma_ch); + return -EINVAL; } - if (found) { - DIMR &= ~(1 << i); - dma_channels[i].name = name; - dma_channels[i].irq_handler = irq_handler; - dma_channels[i].err_handler = err_handler; - dma_channels[i].data = data; + if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) { + pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n", + dma_ch, sg, sgcount, dma_length, dev_addr); + SAR(dma_ch) = dev_addr; + } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) { + pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n", + dma_ch, sg, sgcount, dma_length, dev_addr); + DAR(dma_ch) = dev_addr; } else { - printk(KERN_WARNING "No more available DMA channels for %s\n", - name); - i = -ENODEV; + printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n", + dma_ch); + return -EINVAL; + } + + res = imx_dma_setup_sg_base(dma_ch, sg, sgcount); + if (res <= 0) { + printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch); + return -EINVAL; + } + + return 0; +} + +/** + * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers + * @dma_ch: i.MX DMA channel number + * @irq_handler: the pointer to the function called if the transfer + * ends successfully + * @err_handler: the pointer to the function called if the premature + * end caused by error occurs + * @data: user specified value to be passed to the handlers + */ +int +imx_dma_setup_handlers(imx_dmach_t dma_ch, + void (*irq_handler) (int, void *, struct pt_regs *), + void (*err_handler) (int, void *, struct pt_regs *), + void *data) +{ + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; + unsigned long flags; + + if (!imxdma->name) { + printk(KERN_CRIT "%s: called for not allocated channel %d\n", + __FUNCTION__, dma_ch); + return -ENODEV; + } + + local_irq_save(flags); + DISR = (1 << dma_ch); + imxdma->irq_handler = irq_handler; + imxdma->err_handler = err_handler; + imxdma->data = data; + local_irq_restore(flags); + return 0; +} + +/** + * imx_dma_enable - function to start i.MX DMA channel operation + * @dma_ch: i.MX DMA channel number + * + * The channel has to be allocated by driver through imx_dma_request() + * or imx_dma_request_by_prio() function. + * The transfer parameters has to be set to the channel registers through + * call of the imx_dma_setup_single() or imx_dma_setup_sg() function + * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to + * be set prior this function call by the channel user. + */ +void imx_dma_enable(imx_dmach_t dma_ch) +{ + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; + unsigned long flags; + + pr_debug("imxdma%d: imx_dma_enable\n", dma_ch); + + if (!imxdma->name) { + printk(KERN_CRIT "%s: called for not allocated channel %d\n", + __FUNCTION__, dma_ch); + return; + } + + local_irq_save(flags); + DISR = (1 << dma_ch); + DIMR &= ~(1 << dma_ch); + CCR(dma_ch) |= CCR_CEN; + local_irq_restore(flags); +} + +/** + * imx_dma_disable - stop, finish i.MX DMA channel operatin + * @dma_ch: i.MX DMA channel number + */ +void imx_dma_disable(imx_dmach_t dma_ch) +{ + unsigned long flags; + + pr_debug("imxdma%d: imx_dma_disable\n", dma_ch); + + local_irq_save(flags); + DIMR |= (1 << dma_ch); + CCR(dma_ch) &= ~CCR_CEN; + DISR = (1 << dma_ch); + local_irq_restore(flags); +} + +/** + * imx_dma_request - request/allocate specified channel number + * @dma_ch: i.MX DMA channel number + * @name: the driver/caller own non-%NULL identification + */ +int imx_dma_request(imx_dmach_t dma_ch, const char *name) +{ + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; + unsigned long flags; + + /* basic sanity checks */ + if (!name) + return -EINVAL; + + if (dma_ch >= IMX_DMA_CHANNELS) { + printk(KERN_CRIT "%s: called for non-existed channel %d\n", + __FUNCTION__, dma_ch); + return -EINVAL; } + local_irq_save(flags); + if (imxdma->name) { + local_irq_restore(flags); + return -ENODEV; + } + + imxdma->name = name; + imxdma->irq_handler = NULL; + imxdma->err_handler = NULL; + imxdma->data = NULL; + imxdma->sg = NULL; local_irq_restore(flags); - return i; + return 0; } -void -imx_free_dma(int dma_ch) +/** + * imx_dma_free - release previously acquired channel + * @dma_ch: i.MX DMA channel number + */ +void imx_dma_free(imx_dmach_t dma_ch) { unsigned long flags; + struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch]; - if (!dma_channels[dma_ch].name) { + if (!imxdma->name) { printk(KERN_CRIT "%s: trying to free channel %d which is already freed\n", __FUNCTION__, dma_ch); @@ -92,27 +398,84 @@ imx_free_dma(int dma_ch) } local_irq_save(flags); - DIMR &= ~(1 << dma_ch); - dma_channels[dma_ch].name = NULL; + /* Disable interrupts */ + DIMR |= (1 << dma_ch); + CCR(dma_ch) &= ~CCR_CEN; + imxdma->name = NULL; local_irq_restore(flags); } -static irqreturn_t -dma_err_handler(int irq, void *dev_id, struct pt_regs *regs) +/** + * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority + * @dma_ch: i.MX DMA channel number + * @name: the driver/caller own non-%NULL identification + * @prio: one of the hardware distinguished priority level: + * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW + * + * This function tries to find free channel in the specified priority group + * if the priority cannot be achieved it tries to look for free channel + * in the higher and then even lower priority groups. + * + * Return value: If there is no free channel to allocate, -%ENODEV is returned. + * Zero value indicates successful channel allocation. + */ +int +imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name, + imx_dma_prio prio) +{ + int i; + int best; + + switch (prio) { + case (DMA_PRIO_HIGH): + best = 8; + break; + case (DMA_PRIO_MEDIUM): + best = 4; + break; + case (DMA_PRIO_LOW): + default: + best = 0; + break; + } + + for (i = best; i < IMX_DMA_CHANNELS; i++) { + if (!imx_dma_request(i, name)) { + *pdma_ch = i; + return 0; + } + } + + for (i = best - 1; i >= 0; i--) { + if (!imx_dma_request(i, name)) { + *pdma_ch = i; + return 0; + } + } + + printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__); + + return -ENODEV; +} + +static irqreturn_t dma_err_handler(int irq, void *dev_id, struct pt_regs *regs) { int i, disr = DISR; - struct dma_channel *channel; + struct imx_dma_channel *channel; unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR; DISR = disr; - for (i = 0; i < 11; i++) { - channel = &dma_channels[i]; + for (i = 0; i < IMX_DMA_CHANNELS; i++) { + channel = &imx_dma_channels[i]; - if ( (err_mask & 1<<i) && channel->name && channel->err_handler) { + if ((err_mask & 1 << i) && channel->name + && channel->err_handler) { channel->err_handler(i, channel->data, regs); continue; } + imx_dma_channels[i].sg = NULL; + if (DBTOSR & (1 << i)) { printk(KERN_WARNING "Burst timeout on channel %d (%s)\n", @@ -141,17 +504,27 @@ dma_err_handler(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -static irqreturn_t -dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) { int i, disr = DISR; + pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n", + disr); + DISR = disr; - for (i = 0; i < 11; i++) { + for (i = 0; i < IMX_DMA_CHANNELS; i++) { if (disr & (1 << i)) { - struct dma_channel *channel = &dma_channels[i]; - if (channel->name && channel->irq_handler) { - channel->irq_handler(i, channel->data, regs); + struct imx_dma_channel *channel = &imx_dma_channels[i]; + if (channel->name) { + if (imx_dma_sg_next(i, CNTR(i))) { + CCR(i) &= ~CCR_CEN; + mb(); + CCR(i) |= CCR_CEN; + } else { + if (channel->irq_handler) + channel->irq_handler(i, + channel->data, regs); + } } else { /* * IRQ for an unregistered DMA channel: @@ -165,10 +538,10 @@ dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -static int __init -imx_dma_init(void) +static int __init imx_dma_init(void) { int ret; + int i; /* reset DMA module */ DCR = DCR_DRST; @@ -189,15 +562,27 @@ imx_dma_init(void) DCR = DCR_DEN; /* clear all interrupts */ - DISR = 0x3ff; + DISR = (1 << IMX_DMA_CHANNELS) - 1; /* enable interrupts */ - DIMR = 0; + DIMR = (1 << IMX_DMA_CHANNELS) - 1; + + for (i = 0; i < IMX_DMA_CHANNELS; i++) { + imx_dma_channels[i].sg = NULL; + imx_dma_channels[i].dma_num = i; + } return ret; } arch_initcall(imx_dma_init); -EXPORT_SYMBOL(imx_request_dma); -EXPORT_SYMBOL(imx_free_dma); +EXPORT_SYMBOL(imx_dma_setup_single); +EXPORT_SYMBOL(imx_dma_setup_sg); +EXPORT_SYMBOL(imx_dma_setup_handlers); +EXPORT_SYMBOL(imx_dma_enable); +EXPORT_SYMBOL(imx_dma_disable); +EXPORT_SYMBOL(imx_dma_request); +EXPORT_SYMBOL(imx_dma_free); +EXPORT_SYMBOL(imx_dma_request_by_prio); +EXPORT_SYMBOL(imx_dma_channels); diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 8ab1b040288..e34d0df90ae 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -25,6 +25,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <asm/arch/mmc.h> #include <linux/interrupt.h> #include "generic.h" @@ -51,12 +52,29 @@ static struct platform_device *devices[] __initdata = { &cs89x0_device, }; +#ifdef CONFIG_MMC_IMX +static int mx1ads_mmc_card_present(void) +{ + /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ + return (SSR(1) & (1 << 20) ? 0 : 1); +} + +static struct imxmmc_platform_data mx1ads_mmc_info = { + .card_present = mx1ads_mmc_card_present, +}; +#endif + static void __init mx1ads_init(void) { #ifdef CONFIG_LEDS imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); #endif +#ifdef CONFIG_MMC_IMX + /* SD/MMC card detect */ + imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); + imx_set_mmc_info(&mx1ads_mmc_info); +#endif platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 2327c979041..bf688c12863 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -44,6 +44,15 @@ #include <asm/mach/irq.h> #include <asm/mach/pci.h> +static int __init espresso_pci_init(void) +{ + if (machine_is_espresso()) + ixp23xx_pci_slave_init(); + + return 0; +}; +subsys_initcall(espresso_pci_init); + static void __init espresso_init(void) { physmap_configure(0x90000000, 0x02000000, 2, NULL); diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 5330ad78c1b..ac72f94c5b4 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -201,7 +201,7 @@ int clear_master_aborts(void) return 0; } -void __init ixp23xx_pci_preinit(void) +static void __init ixp23xx_pci_common_init(void) { #ifdef __ARMEB__ *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ @@ -219,7 +219,18 @@ void __init ixp23xx_pci_preinit(void) *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); } else { *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); + + /* + * Enable coherency on A2 silicon. + */ + if (arch_is_coherent()) + *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF; } +} + +void __init ixp23xx_pci_preinit(void) +{ + ixp23xx_pci_common_init(); hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, "PCI config cycle to non-existent device"); @@ -273,3 +284,8 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) return 1; } + +void ixp23xx_pci_slave_init(void) +{ + ixp23xx_pci_common_init(); +} diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 86a0f0d1434..f8d716ccc1d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -69,12 +69,6 @@ config MACH_VOICEBLUE Support for Voiceblue GSM/VoIP gateway. Say Y here if you have such a board. -config MACH_NETSTAR - bool "NetStar" - depends on ARCH_OMAP1 && ARCH_OMAP15XX - help - Support for NetStar PBX. Say Y here if you have such a board. - config MACH_OMAP_PALMTE bool "Palm Tungsten E" depends on ARCH_OMAP1 && ARCH_OMAP15XX @@ -85,6 +79,20 @@ config MACH_OMAP_PALMTE informations. Say Y here if you have such a PDA, say NO otherwise. +config MACH_NOKIA770 + bool "Nokia 770" + depends on ARCH_OMAP1 && ARCH_OMAP16XX + help + Support for the Nokia 770 Internet Tablet. Say Y here if you + have such a device. + +config MACH_AMS_DELTA + bool "Amstrad E3 (Delta)" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Amstrad E3 (codename Delta) videophone. Say Y here + if you have such a device. + config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index b0b00156faa..9ea719550ad 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,13 @@ # # Common support -obj-y := io.o id.o clock.o irq.o time.o mux.o serial.o devices.o +obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o + +obj-$(CONFIG_OMAP_MPU_TIMER) += time.o + +# Power Management +obj-$(CONFIG_PM) += pm.o sleep.o + led-y := leds.o # Specific board support @@ -14,8 +20,9 @@ obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o -obj-$(CONFIG_MACH_NETSTAR) += board-netstar.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o +obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o +obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c new file mode 100644 index 00000000000..6178f046f12 --- /dev/null +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -0,0 +1,116 @@ +/* + * linux/arch/arm/mach-omap1/board-ams-delta.c + * + * Modified from board-generic.c + * + * Board specific inits for the Amstrad E3 (codename Delta) videophone + * + * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/board-ams-delta.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> + +static u8 ams_delta_latch1_reg; +static u16 ams_delta_latch2_reg; + +void ams_delta_latch1_write(u8 mask, u8 value) +{ + ams_delta_latch1_reg &= ~mask; + ams_delta_latch1_reg |= value; + *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; +} + +void ams_delta_latch2_write(u16 mask, u16 value) +{ + ams_delta_latch2_reg &= ~mask; + ams_delta_latch2_reg |= value; + *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; +} + +static void __init ams_delta_init_irq(void) +{ + omap1_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); +} + +static struct map_desc ams_delta_io_desc[] __initdata = { + // AMS_DELTA_LATCH1 + { + .virtual = AMS_DELTA_LATCH1_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + }, + // AMS_DELTA_LATCH2 + { + .virtual = AMS_DELTA_LATCH2_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + }, + // AMS_DELTA_MODEM + { + .virtual = AMS_DELTA_MODEM_VIRT, + .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + } +}; + +static struct omap_uart_config ams_delta_uart_config __initdata = { + .enabled_uarts = 1, +}; + +static struct omap_board_config_kernel ams_delta_config[] = { + { OMAP_TAG_UART, &ams_delta_uart_config }, +}; + +static void __init ams_delta_init(void) +{ + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); + + omap_board_config = ams_delta_config; + omap_board_config_size = ARRAY_SIZE(ams_delta_config); + omap_serial_init(); + + /* Clear latch2 (NAND, LCD, modem enable) */ + ams_delta_latch2_write(~0, 0); +} + +static void __init ams_delta_map_io(void) +{ + omap1_map_common_io(); +} + +MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") + /* Maintainer: Jonathan McDowell <noodles@earth.li> */ + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = ams_delta_map_io, + .init_irq = ams_delta_init_irq, + .init_machine = ams_delta_init, + .timer = &omap_timer, +MACHINE_END + +EXPORT_SYMBOL(ams_delta_latch1_write); +EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index a177e78b2b8..33d01adab1e 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -88,7 +88,7 @@ static struct omap_board_config_kernel generic_config[] = { static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { generic_config[0].data = &generic1510_usb_config; } #endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 89f0cc74a51..cd3a06dfc0a 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -24,7 +24,9 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -35,12 +37,55 @@ #include <asm/arch/gpio.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> +#include <asm/arch/irda.h> #include <asm/arch/usb.h> +#include <asm/arch/keypad.h> #include <asm/arch/common.h> +#include <asm/arch/mcbsp.h> +#include <asm/arch/omap-alsa.h> extern int omap_gpio_init(void); -static struct mtd_partition h2_partitions[] = { +static int h2_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_3), + KEY(0, 3, KEY_F10), + KEY(0, 4, KEY_F5), + KEY(0, 5, KEY_9), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_2), + KEY(1, 3, KEY_F9), + KEY(1, 4, KEY_F7), + KEY(1, 5, KEY_0), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_6), + KEY(2, 2, KEY_1), + KEY(2, 3, KEY_F2), + KEY(2, 4, KEY_F6), + KEY(2, 5, KEY_HOME), + KEY(3, 0, KEY_8), + KEY(3, 1, KEY_5), + KEY(3, 2, KEY_F12), + KEY(3, 3, KEY_F3), + KEY(3, 4, KEY_F8), + KEY(3, 5, KEY_END), + KEY(4, 0, KEY_7), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_F11), + KEY(4, 3, KEY_F1), + KEY(4, 4, KEY_F4), + KEY(4, 5, KEY_ESC), + KEY(5, 0, KEY_F13), + KEY(5, 1, KEY_F14), + KEY(5, 2, KEY_F15), + KEY(5, 3, KEY_F16), + KEY(5, 4, KEY_SLEEP), + 0 +}; + +static struct mtd_partition h2_nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", @@ -71,26 +116,26 @@ static struct mtd_partition h2_partitions[] = { } }; -static struct flash_platform_data h2_flash_data = { +static struct flash_platform_data h2_nor_data = { .map_name = "cfi_probe", .width = 2, - .parts = h2_partitions, - .nr_parts = ARRAY_SIZE(h2_partitions), + .parts = h2_nor_partitions, + .nr_parts = ARRAY_SIZE(h2_nor_partitions), }; -static struct resource h2_flash_resource = { +static struct resource h2_nor_resource = { /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; -static struct platform_device h2_flash_device = { +static struct platform_device h2_nor_device = { .name = "omapflash", .id = 0, .dev = { - .platform_data = &h2_flash_data, + .platform_data = &h2_nor_data, }, .num_resources = 1, - .resource = &h2_flash_resource, + .resource = &h2_nor_resource, }; static struct resource h2_smc91x_resources[] = { @@ -113,9 +158,119 @@ static struct platform_device h2_smc91x_device = { .resource = h2_smc91x_resources, }; +static struct resource h2_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data h2_kp_data = { + .rows = 8, + .cols = 8, + .keymap = h2_keymap, + .rep = 1, +}; + +static struct platform_device h2_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &h2_kp_data, + }, + .num_resources = ARRAY_SIZE(h2_kp_resources), + .resource = h2_kp_resources, +}; + +#define H2_IRDA_FIRSEL_GPIO_PIN 17 + +#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) +static int h2_transceiver_mode(struct device *dev, int state) +{ + if (state & IR_SIRMODE) + omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0); + else /* MIR/FIR */ + omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1); + + return 0; +} +#endif + +static struct omap_irda_config h2_irda_data = { + .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, + .rx_channel = OMAP_DMA_UART3_RX, + .tx_channel = OMAP_DMA_UART3_TX, + .dest_start = UART3_THR, + .src_start = UART3_RHR, + .tx_trigger = 0, + .rx_trigger = 0, +}; + +static struct resource h2_irda_resources[] = { + [0] = { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; +static struct platform_device h2_irda_device = { + .name = "omapirda", + .id = 0, + .dev = { + .platform_data = &h2_irda_data, + }, + .num_resources = ARRAY_SIZE(h2_irda_resources), + .resource = h2_irda_resources, +}; + +static struct platform_device h2_lcd_device = { + .name = "lcd_h2", + .id = -1, +}; + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(15), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), + + .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, + //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "H2 TSC2101", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, // tsc2101_configure, + .codec_set_samplerate = NULL, // tsc2101_set_samplerate, + .codec_clock_setup = NULL, // tsc2101_clock_setup, + .codec_clock_on = NULL, // tsc2101_clock_on, + .codec_clock_off = NULL, // tsc2101_clock_off, + .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, +}; + +static struct platform_device h2_mcbsp1_device = { + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + static struct platform_device *h2_devices[] __initdata = { - &h2_flash_device, + &h2_nor_device, &h2_smc91x_device, + &h2_irda_device, + &h2_kp_device, + &h2_lcd_device, + &h2_mcbsp1_device, }; static void __init h2_init_smc91x(void) @@ -164,7 +319,6 @@ static struct omap_uart_config h2_uart_config __initdata = { }; static struct omap_lcd_config h2_lcd_config __initdata = { - .panel_name = "h2", .ctrl_name = "internal", }; @@ -177,16 +331,34 @@ static struct omap_board_config_kernel h2_config[] = { static void __init h2_init(void) { - /* NOTE: revC boards support NAND-boot, which can put NOR on CS2B - * and NAND (either 16bit or 8bit) on CS3. + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped + * to address 0 by a dip switch), NAND on CS2B. The NAND driver will + * notice whether a NAND chip is enabled at probe time. + * + * FIXME revC boards (and H3) support NAND-boot, with a dip switch to + * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try + * detecting that in code here, to avoid probing every possible flash + * configuration... */ - h2_flash_resource.end = h2_flash_resource.start = omap_cs3_phys(); - h2_flash_resource.end += SZ_32M - 1; + h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); + h2_nor_resource.end += SZ_32M - 1; + + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); + omap_cfg_reg(M8_1610_FLASH_CS2B_WE); /* MMC: card detect and WP */ // omap_cfg_reg(U19_ARMIO1); /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ + /* Irda */ +#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) + omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A); + if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) { + omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0); + h2_irda_data.transceiver_mode = h2_transceiver_mode; + } +#endif + platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index d9f38626599..4b8d0ec73cb 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -21,8 +21,11 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/errno.h> +#include <linux/workqueue.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> #include <asm/setup.h> #include <asm/page.h> @@ -33,15 +36,59 @@ #include <asm/mach/map.h> #include <asm/arch/gpio.h> +#include <asm/arch/gpioexpander.h> #include <asm/arch/irqs.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> +#include <asm/arch/irda.h> #include <asm/arch/usb.h> +#include <asm/arch/keypad.h> +#include <asm/arch/dma.h> #include <asm/arch/common.h> extern int omap_gpio_init(void); -static struct mtd_partition h3_partitions[] = { +static int h3_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_3), + KEY(0, 3, KEY_F10), + KEY(0, 4, KEY_F5), + KEY(0, 5, KEY_9), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_2), + KEY(1, 3, KEY_F9), + KEY(1, 4, KEY_F7), + KEY(1, 5, KEY_0), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_6), + KEY(2, 2, KEY_1), + KEY(2, 3, KEY_F2), + KEY(2, 4, KEY_F6), + KEY(2, 5, KEY_HOME), + KEY(3, 0, KEY_8), + KEY(3, 1, KEY_5), + KEY(3, 2, KEY_F12), + KEY(3, 3, KEY_F3), + KEY(3, 4, KEY_F8), + KEY(3, 5, KEY_END), + KEY(4, 0, KEY_7), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_F11), + KEY(4, 3, KEY_F1), + KEY(4, 4, KEY_F4), + KEY(4, 5, KEY_ESC), + KEY(5, 0, KEY_F13), + KEY(5, 1, KEY_F14), + KEY(5, 2, KEY_F15), + KEY(5, 3, KEY_F16), + KEY(5, 4, KEY_SLEEP), + 0 +}; + + +static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", @@ -72,26 +119,80 @@ static struct mtd_partition h3_partitions[] = { } }; -static struct flash_platform_data h3_flash_data = { +static struct flash_platform_data nor_data = { .map_name = "cfi_probe", .width = 2, - .parts = h3_partitions, - .nr_parts = ARRAY_SIZE(h3_partitions), + .parts = nor_partitions, + .nr_parts = ARRAY_SIZE(nor_partitions), }; -static struct resource h3_flash_resource = { +static struct resource nor_resource = { /* This is on CS3, wherever it's mapped */ .flags = IORESOURCE_MEM, }; -static struct platform_device flash_device = { +static struct platform_device nor_device = { .name = "omapflash", .id = 0, .dev = { - .platform_data = &h3_flash_data, + .platform_data = &nor_data, + }, + .num_resources = 1, + .resource = &nor_resource, +}; + +static struct mtd_partition nand_partitions[] = { +#if 0 + /* REVISIT: enable these partitions if you make NAND BOOT work */ + { + .name = "xloader", + .offset = 0, + .size = 64 * 1024, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "bootloader", + .offset = MTDPART_OFS_APPEND, + .size = 256 * 1024, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 192 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 2 * SZ_1M, + }, +#endif + { + .name = "filesystem", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ +static struct nand_platform_data nand_data = { + .options = NAND_SAMSUNG_LP_OPTIONS, + .parts = nand_partitions, + .nr_parts = ARRAY_SIZE(nand_partitions), +}; + +static struct resource nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nand_device = { + .name = "omapnand", + .id = 0, + .dev = { + .platform_data = &nand_data, }, .num_resources = 1, - .resource = &h3_flash_resource, + .resource = &nand_resource, }; static struct resource smc91x_resources[] = { @@ -138,10 +239,136 @@ static struct platform_device intlat_device = { .resource = intlat_resources, }; +static struct resource h3_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data h3_kp_data = { + .rows = 8, + .cols = 8, + .keymap = h3_keymap, + .rep = 1, +}; + +static struct platform_device h3_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &h3_kp_data, + }, + .num_resources = ARRAY_SIZE(h3_kp_resources), + .resource = h3_kp_resources, +}; + + +/* Select between the IrDA and aGPS module + */ +static int h3_select_irda(struct device *dev, int state) +{ + unsigned char expa; + int err = 0; + + if ((err = read_gpio_expa(&expa, 0x26))) { + printk(KERN_ERR "Error reading from I/O EXPANDER \n"); + return err; + } + + /* 'P6' enable/disable IRDA_TX and IRDA_RX */ + if (state & IR_SEL) { /* IrDA */ + if ((err = write_gpio_expa(expa | 0x40, 0x26))) { + printk(KERN_ERR "Error writing to I/O EXPANDER \n"); + return err; + } + } else { + if ((err = write_gpio_expa(expa & ~0x40, 0x26))) { + printk(KERN_ERR "Error writing to I/O EXPANDER \n"); + return err; + } + } + return err; +} + +static void set_trans_mode(void *data) +{ + int *mode = data; + unsigned char expa; + int err = 0; + + if ((err = read_gpio_expa(&expa, 0x27)) != 0) { + printk(KERN_ERR "Error reading from I/O expander\n"); + } + + expa &= ~0x03; + + if (*mode & IR_SIRMODE) { + expa |= 0x01; + } else { /* MIR/FIR */ + expa |= 0x03; + } + + if ((err = write_gpio_expa(expa, 0x27)) != 0) { + printk(KERN_ERR "Error writing to I/O expander\n"); + } +} + +static int h3_transceiver_mode(struct device *dev, int mode) +{ + struct omap_irda_config *irda_config = dev->platform_data; + + cancel_delayed_work(&irda_config->gpio_expa); + PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode); + schedule_work(&irda_config->gpio_expa); + + return 0; +} + +static struct omap_irda_config h3_irda_data = { + .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, + .transceiver_mode = h3_transceiver_mode, + .select_irda = h3_select_irda, + .rx_channel = OMAP_DMA_UART3_RX, + .tx_channel = OMAP_DMA_UART3_TX, + .dest_start = UART3_THR, + .src_start = UART3_RHR, + .tx_trigger = 0, + .rx_trigger = 0, +}; + +static struct resource h3_irda_resources[] = { + [0] = { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h3_irda_device = { + .name = "omapirda", + .id = 0, + .dev = { + .platform_data = &h3_irda_data, + }, + .num_resources = ARRAY_SIZE(h3_irda_resources), + .resource = h3_irda_resources, +}; + +static struct platform_device h3_lcd_device = { + .name = "lcd_h3", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { - &flash_device, + &nor_device, + &nand_device, &smc91x_device, &intlat_device, + &h3_irda_device, + &h3_kp_device, + &h3_lcd_device, }; static struct omap_usb_config h3_usb_config __initdata = { @@ -171,7 +398,6 @@ static struct omap_uart_config h3_uart_config __initdata = { }; static struct omap_lcd_config h3_lcd_config __initdata = { - .panel_name = "h3", .ctrl_name = "internal", }; @@ -182,11 +408,36 @@ static struct omap_board_config_kernel h3_config[] = { { OMAP_TAG_LCD, &h3_lcd_config }, }; +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct nand_platform_data *data) +{ + return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN); +} + static void __init h3_init(void) { - h3_flash_resource.end = h3_flash_resource.start = omap_cs3_phys(); - h3_flash_resource.end += OMAP_CS3_SIZE - 1; - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped + * to address 0 by a dip switch), NAND on CS2B. The NAND driver will + * notice whether a NAND chip is enabled at probe time. + * + * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND + * (which on H2 may be 16bit) on CS3. Try detecting that in code here, + * to avoid probing every possible flash configuration... + */ + nor_resource.end = nor_resource.start = omap_cs3_phys(); + nor_resource.end += SZ_32M - 1; + + nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; + nand_resource.end += SZ_4K - 1; + if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN))) + nand_data.dev_ready = nand_dev_ready; + + /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ + /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ + omap_cfg_reg(V2_1710_GPIO10); + + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index a04e4332915..e90c137a4cf 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -34,8 +35,22 @@ #include <asm/arch/gpio.h> #include <asm/arch/tc.h> #include <asm/arch/usb.h> +#include <asm/arch/keypad.h> #include <asm/arch/common.h> +static int innovator_keymap[] = { + KEY(0, 0, KEY_F1), + KEY(0, 3, KEY_DOWN), + KEY(1, 1, KEY_F2), + KEY(1, 2, KEY_RIGHT), + KEY(2, 0, KEY_F3), + KEY(2, 1, KEY_F4), + KEY(2, 2, KEY_UP), + KEY(3, 2, KEY_ENTER), + KEY(3, 3, KEY_LEFT), + 0 +}; + static struct mtd_partition innovator_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -97,6 +112,31 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; +static struct resource innovator_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data innovator_kp_data = { + .rows = 8, + .cols = 8, + .keymap = innovator_keymap, +}; + +static struct platform_device innovator_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &innovator_kp_data, + }, + .num_resources = ARRAY_SIZE(innovator_kp_resources), + .resource = innovator_kp_resources, +}; + + #ifdef CONFIG_ARCH_OMAP15XX /* Only FPGA needs to be mapped here. All others are done with ioremap */ @@ -129,9 +169,16 @@ static struct platform_device innovator1510_smc91x_device = { .resource = innovator1510_smc91x_resources, }; +static struct platform_device innovator1510_lcd_device = { + .name = "lcd_inn1510", + .id = -1, +}; + static struct platform_device *innovator1510_devices[] __initdata = { &innovator_flash_device, &innovator1510_smc91x_device, + &innovator_kp_device, + &innovator1510_lcd_device, }; #endif /* CONFIG_ARCH_OMAP15XX */ @@ -158,9 +205,16 @@ static struct platform_device innovator1610_smc91x_device = { .resource = innovator1610_smc91x_resources, }; +static struct platform_device innovator1610_lcd_device = { + .name = "inn1610_lcd", + .id = -1, +}; + static struct platform_device *innovator1610_devices[] __initdata = { &innovator_flash_device, &innovator1610_smc91x_device, + &innovator_kp_device, + &innovator1610_lcd_device, }; #endif /* CONFIG_ARCH_OMAP16XX */ @@ -206,7 +260,6 @@ static struct omap_usb_config innovator1510_usb_config __initdata = { }; static struct omap_lcd_config innovator1510_lcd_config __initdata = { - .panel_name = "inn1510", .ctrl_name = "internal", }; #endif @@ -228,7 +281,6 @@ static struct omap_usb_config h2_usb_config __initdata = { }; static struct omap_lcd_config innovator1610_lcd_config __initdata = { - .panel_name = "inn1610", .ctrl_name = "internal", }; #endif diff --git a/arch/arm/mach-omap1/board-netstar.c b/arch/arm/mach-omap1/board-netstar.c deleted file mode 100644 index 7520e602d7a..00000000000 --- a/arch/arm/mach-omap1/board-netstar.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Modified from board-generic.c - * - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz> - * - * Code for Netstar OMAP board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/notifier.h> -#include <linux/reboot.h> - -#include <asm/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <asm/arch/gpio.h> -#include <asm/arch/mux.h> -#include <asm/arch/usb.h> -#include <asm/arch/common.h> - -extern void __init omap_init_time(void); -extern int omap_gpio_init(void); - -static struct resource netstar_smc91x_resources[] = { - [0] = { - .start = OMAP_CS1_PHYS + 0x300, - .end = OMAP_CS1_PHYS + 0x300 + 16, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(8), - .end = OMAP_GPIO_IRQ(8), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device netstar_smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(netstar_smc91x_resources), - .resource = netstar_smc91x_resources, -}; - -static struct platform_device *netstar_devices[] __initdata = { - &netstar_smc91x_device, -}; - -static struct omap_uart_config netstar_uart_config __initdata = { - .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), -}; - -static struct omap_board_config_kernel netstar_config[] = { - { OMAP_TAG_UART, &netstar_uart_config }, -}; - -static void __init netstar_init_irq(void) -{ - omap1_init_common_hw(); - omap_init_irq(); - omap_gpio_init(); -} - -static void __init netstar_init(void) -{ - /* green LED */ - omap_request_gpio(4); - omap_set_gpio_direction(4, 0); - /* smc91x reset */ - omap_request_gpio(7); - omap_set_gpio_direction(7, 0); - omap_set_gpio_dataout(7, 1); - udelay(2); /* wait at least 100ns */ - omap_set_gpio_dataout(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - omap_request_gpio(8); - - omap_request_gpio(12); - omap_request_gpio(13); - omap_request_gpio(14); - omap_request_gpio(15); - set_irq_type(OMAP_GPIO_IRQ(12), IRQT_FALLING); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_FALLING); - set_irq_type(OMAP_GPIO_IRQ(14), IRQT_FALLING); - set_irq_type(OMAP_GPIO_IRQ(15), IRQT_FALLING); - - platform_add_devices(netstar_devices, ARRAY_SIZE(netstar_devices)); - - /* Switch on green LED */ - omap_set_gpio_dataout(4, 0); - /* Switch off red LED */ - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ - omap_writeb(0x80, OMAP_LPG1_LCR); - - omap_board_config = netstar_config; - omap_board_config_size = ARRAY_SIZE(netstar_config); - omap_serial_init(); -} - -static void __init netstar_map_io(void) -{ - omap1_map_common_io(); -} - -#define MACHINE_PANICED 1 -#define MACHINE_REBOOTING 2 -#define MACHINE_REBOOT 4 -static unsigned long machine_state; - -static int panic_event(struct notifier_block *this, unsigned long event, - void *ptr) -{ - if (test_and_set_bit(MACHINE_PANICED, &machine_state)) - return NOTIFY_DONE; - - /* Switch off green LED */ - omap_set_gpio_dataout(4, 1); - /* Flash red LED */ - omap_writeb(0x78, OMAP_LPG1_LCR); - omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */ - - return NOTIFY_DONE; -} - -static struct notifier_block panic_block = { - .notifier_call = panic_event, -}; - -static int __init netstar_late_init(void) -{ - /* TODO: Setup front panel switch here */ - - /* Setup panic notifier */ - atomic_notifier_chain_register(&panic_notifier_list, &panic_block); - - return 0; -} - -postcore_initcall(netstar_late_init); - -MACHINE_START(NETSTAR, "NetStar OMAP5910") - /* Maintainer: Ladislav Michl <michl@2n.cz> */ - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, - .boot_params = 0x10000100, - .map_io = netstar_map_io, - .init_irq = netstar_init_irq, - .init_machine = netstar_init, - .timer = &omap_timer, -MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c new file mode 100644 index 00000000000..02b980d77b1 --- /dev/null +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -0,0 +1,268 @@ +/* + * linux/arch/arm/mach-omap1/board-nokia770.c + * + * Modified from board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/clk.h> + +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/keypad.h> +#include <asm/arch/common.h> +#include <asm/arch/dsp_common.h> +#include <asm/arch/aic23.h> +#include <asm/arch/gpio.h> + +static void __init omap_nokia770_init_irq(void) +{ + /* On Nokia 770, the SleepX signal is masked with an + * MPUIO line by default. It has to be unmasked for it + * to become functional */ + + /* SleepX mask direction */ + omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); + /* Unmask SleepX signal */ + omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + + omap1_init_common_hw(); + omap_init_irq(); +} + +static int nokia770_keymap[] = { + KEY(0, 1, GROUP_0 | KEY_UP), + KEY(0, 2, GROUP_1 | KEY_F5), + KEY(1, 0, GROUP_0 | KEY_LEFT), + KEY(1, 1, GROUP_0 | KEY_ENTER), + KEY(1, 2, GROUP_0 | KEY_RIGHT), + KEY(2, 0, GROUP_1 | KEY_ESC), + KEY(2, 1, GROUP_0 | KEY_DOWN), + KEY(2, 2, GROUP_1 | KEY_F4), + KEY(3, 0, GROUP_2 | KEY_F7), + KEY(3, 1, GROUP_2 | KEY_F8), + KEY(3, 2, GROUP_2 | KEY_F6), + 0 +}; + +static struct resource nokia770_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data nokia770_kp_data = { + .rows = 8, + .cols = 8, + .keymap = nokia770_keymap +}; + +static struct platform_device nokia770_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &nokia770_kp_data, + }, + .num_resources = ARRAY_SIZE(nokia770_kp_resources), + .resource = nokia770_kp_resources, +}; + +static struct platform_device *nokia770_devices[] __initdata = { + &nokia770_kp_device, +}; + +static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, +}; + +static struct spi_board_info nokia770_spi_board_info[] __initdata = { + [0] = { + .modalias = "lcd_lph8923", + .bus_num = 2, + .chip_select = 3, + .max_speed_hz = 12000000, + }, + [1] = { + .modalias = "ads7846", + .bus_num = 2, + .chip_select = 0, + .max_speed_hz = 2500000, + .irq = OMAP_GPIO_IRQ(15), + .platform_data = &nokia770_ads7846_platform_data, + }, +}; + + +/* assume no Mini-AB port */ + +static struct omap_usb_config nokia770_usb_config __initdata = { + .otg = 1, + .register_host = 1, + .register_dev = 1, + .hmc_mode = 16, + .pins[0] = 6, +}; + +static struct omap_mmc_config nokia770_mmc_config __initdata = { + .mmc[0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, + .mmc[1] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_board_config_kernel nokia770_config[] = { + { OMAP_TAG_USB, NULL }, + { OMAP_TAG_MMC, &nokia770_mmc_config }, +}; + +/* + * audio power control + */ +#define HEADPHONE_GPIO 14 +#define AMPLIFIER_CTRL_GPIO 58 + +static struct clk *dspxor_ck; +static DECLARE_MUTEX(audio_pwr_sem); +/* + * audio_pwr_state + * +--+-------------------------+---------------------------------------+ + * |-1|down |power-up request -> 0 | + * +--+-------------------------+---------------------------------------+ + * | 0|up |power-down(1) request -> 1 | + * | | |power-down(2) request -> (ignore) | + * +--+-------------------------+---------------------------------------+ + * | 1|up, |power-up request -> 0 | + * | |received down(1) request |power-down(2) request -> -1 | + * +--+-------------------------+---------------------------------------+ + */ +static int audio_pwr_state = -1; + +/* + * audio_pwr_up / down should be called under audio_pwr_sem + */ +static void nokia770_audio_pwr_up(void) +{ + clk_enable(dspxor_ck); + + /* Turn on codec */ + tlv320aic23_power_up(); + + if (omap_get_gpio_datain(HEADPHONE_GPIO)) + /* HP not connected, turn on amplifier */ + omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 1); + else + /* HP connected, do not turn on amplifier */ + printk("HP connected\n"); +} + +static void codec_delayed_power_down(void *arg) +{ + down(&audio_pwr_sem); + if (audio_pwr_state == -1) + tlv320aic23_power_down(); + clk_disable(dspxor_ck); + up(&audio_pwr_sem); +} + +static DECLARE_WORK(codec_power_down_work, codec_delayed_power_down, NULL); + +static void nokia770_audio_pwr_down(void) +{ + /* Turn off amplifier */ + omap_set_gpio_dataout(AMPLIFIER_CTRL_GPIO, 0); + + /* Turn off codec: schedule delayed work */ + schedule_delayed_work(&codec_power_down_work, HZ / 20); /* 50ms */ +} + +void nokia770_audio_pwr_up_request(int stage) +{ + down(&audio_pwr_sem); + if (audio_pwr_state == -1) + nokia770_audio_pwr_up(); + /* force audio_pwr_state = 0, even if it was 1. */ + audio_pwr_state = 0; + up(&audio_pwr_sem); +} + +void nokia770_audio_pwr_down_request(int stage) +{ + down(&audio_pwr_sem); + switch (stage) { + case 1: + if (audio_pwr_state == 0) + audio_pwr_state = 1; + break; + case 2: + if (audio_pwr_state == 1) { + nokia770_audio_pwr_down(); + audio_pwr_state = -1; + } + break; + } + up(&audio_pwr_sem); +} + +static void __init omap_nokia770_init(void) +{ + nokia770_config[0].data = &nokia770_usb_config; + + platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); + spi_register_board_info(nokia770_spi_board_info, + ARRAY_SIZE(nokia770_spi_board_info)); + omap_board_config = nokia770_config; + omap_board_config_size = ARRAY_SIZE(nokia770_config); + omap_serial_init(); + omap_dsp_audio_pwr_up_request = nokia770_audio_pwr_up_request; + omap_dsp_audio_pwr_down_request = nokia770_audio_pwr_down_request; + dspxor_ck = clk_get(0, "dspxor_ck"); +} + +static void __init omap_nokia770_map_io(void) +{ + omap1_map_common_io(); +} + +MACHINE_START(NOKIA770, "Nokia 770") + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_nokia770_map_io, + .init_irq = omap_nokia770_init_irq, + .init_machine = omap_nokia770_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 543fa136106..1160093e8ef 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -33,6 +33,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -44,7 +45,24 @@ #include <asm/arch/usb.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> +#include <asm/arch/keypad.h> #include <asm/arch/common.h> +#include <asm/arch/mcbsp.h> +#include <asm/arch/omap-alsa.h> + +static int osk_keymap[] = { + KEY(0, 0, KEY_F1), + KEY(0, 3, KEY_UP), + KEY(1, 1, KEY_LEFTCTRL), + KEY(1, 2, KEY_LEFT), + KEY(2, 0, KEY_SPACE), + KEY(2, 1, KEY_ESC), + KEY(2, 2, KEY_DOWN), + KEY(3, 2, KEY_ENTER), + KEY(3, 3, KEY_RIGHT), + 0 +}; + static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -133,9 +151,69 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; +#define DEFAULT_BITPERSAMPLE 16 + +static struct omap_mcbsp_reg_cfg mcbsp_regs = { + .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), + .spcr1 = RINTM(3) | RRST, + .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | + RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), + .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), + .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | + XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, + .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), + .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), + .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), + /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ + .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ +}; + +static struct omap_alsa_codec_config alsa_config = { + .name = "OSK AIC23", + .mcbsp_regs_alsa = &mcbsp_regs, + .codec_configure_dev = NULL, // aic23_configure, + .codec_set_samplerate = NULL, // aic23_set_samplerate, + .codec_clock_setup = NULL, // aic23_clock_setup, + .codec_clock_on = NULL, // aic23_clock_on, + .codec_clock_off = NULL, // aic23_clock_off, + .get_default_samplerate = NULL, // aic23_get_default_samplerate, +}; + static struct platform_device osk5912_mcbsp1_device = { - .name = "omap_mcbsp", - .id = 1, + .name = "omap_alsa_mcbsp", + .id = 1, + .dev = { + .platform_data = &alsa_config, + }, +}; + +static struct resource osk5912_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data osk_kp_data = { + .rows = 8, + .cols = 8, + .keymap = osk_keymap, +}; + +static struct platform_device osk5912_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &osk_kp_data, + }, + .num_resources = ARRAY_SIZE(osk5912_kp_resources), + .resource = osk5912_kp_resources, +}; + +static struct platform_device osk5912_lcd_device = { + .name = "lcd_osk", + .id = -1, }; static struct platform_device *osk5912_devices[] __initdata = { @@ -143,6 +221,8 @@ static struct platform_device *osk5912_devices[] __initdata = { &osk5912_smc91x_device, &osk5912_cf_device, &osk5912_mcbsp1_device, + &osk5912_kp_device, + &osk5912_lcd_device, }; static void __init osk_init_smc91x(void) @@ -197,7 +277,6 @@ static struct omap_uart_config osk_uart_config __initdata = { }; static struct omap_lcd_config osk_lcd_config __initdata = { - .panel_name = "osk", .ctrl_name = "internal", }; @@ -255,8 +334,18 @@ static void __init osk_mistral_init(void) static void __init osk_mistral_init(void) { } #endif +#define EMIFS_CS3_VAL (0x88013141) + static void __init osk_init(void) { + /* Workaround for wrong CS3 (NOR flash) timing + * There are some U-Boot versions out there which configure + * wrong CS3 memory timings. This mainly leads to CRC + * or similiar errors if you use NOR flash (e.g. with JFFS2) + */ + if (EMIFS_CCS(3) != EMIFS_CS3_VAL) + EMIFS_CCS(3) = EMIFS_CS3_VAL; + osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index e488f723677..4bc8a62909b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -38,6 +38,15 @@ static void __init omap_generic_init_irq(void) omap_init_irq(); } +static struct platform_device palmte_lcd_device = { + .name = "lcd_palmte", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &palmte_lcd_device, +}; + static struct omap_usb_config palmte_usb_config __initdata = { .register_dev = 1, .hmc_mode = 0, @@ -55,7 +64,6 @@ static struct omap_mmc_config palmte_mmc_config __initdata = { }; static struct omap_lcd_config palmte_lcd_config __initdata = { - .panel_name = "palmte", .ctrl_name = "internal", }; @@ -69,6 +77,8 @@ static void __init omap_generic_init(void) { omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); + + platform_add_devices(devices, ARRAY_SIZE(devices)); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 3913a3cc0ce..64b45d8ae35 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -16,7 +16,9 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -28,9 +30,44 @@ #include <asm/arch/gpio.h> #include <asm/arch/mux.h> #include <asm/arch/fpga.h> +#include <asm/arch/keypad.h> #include <asm/arch/common.h> #include <asm/arch/board.h> +static int p2_keymap[] = { + KEY(0,0,KEY_UP), + KEY(0,1,KEY_RIGHT), + KEY(0,2,KEY_LEFT), + KEY(0,3,KEY_DOWN), + KEY(0,4,KEY_CENTER), + KEY(0,5,KEY_0_5), + KEY(1,0,KEY_SOFT2), + KEY(1,1,KEY_SEND), + KEY(1,2,KEY_END), + KEY(1,3,KEY_VOLUMEDOWN), + KEY(1,4,KEY_VOLUMEUP), + KEY(1,5,KEY_RECORD), + KEY(2,0,KEY_SOFT1), + KEY(2,1,KEY_3), + KEY(2,2,KEY_6), + KEY(2,3,KEY_9), + KEY(2,4,KEY_SHARP), + KEY(2,5,KEY_2_5), + KEY(3,0,KEY_BACK), + KEY(3,1,KEY_2), + KEY(3,2,KEY_5), + KEY(3,3,KEY_8), + KEY(3,4,KEY_0), + KEY(3,5,KEY_HEADSETHOOK), + KEY(4,0,KEY_HOME), + KEY(4,1,KEY_1), + KEY(4,2,KEY_4), + KEY(4,3,KEY_7), + KEY(4,4,KEY_STAR), + KEY(4,5,KEY_POWER), + 0 +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -44,7 +81,7 @@ static struct resource smc91x_resources[] = { }, }; -static struct mtd_partition p2_partitions[] = { +static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { .name = "bootloader", @@ -75,27 +112,47 @@ static struct mtd_partition p2_partitions[] = { }, }; -static struct flash_platform_data p2_flash_data = { +static struct flash_platform_data nor_data = { .map_name = "cfi_probe", .width = 2, - .parts = p2_partitions, - .nr_parts = ARRAY_SIZE(p2_partitions), + .parts = nor_partitions, + .nr_parts = ARRAY_SIZE(nor_partitions), }; -static struct resource p2_flash_resource = { +static struct resource nor_resource = { .start = OMAP_CS0_PHYS, .end = OMAP_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device p2_flash_device = { +static struct platform_device nor_device = { .name = "omapflash", .id = 0, .dev = { - .platform_data = &p2_flash_data, + .platform_data = &nor_data, + }, + .num_resources = 1, + .resource = &nor_resource, +}; + +static struct nand_platform_data nand_data = { + .options = NAND_SAMSUNG_LP_OPTIONS, +}; + +static struct resource nand_resource = { + .start = OMAP_CS3_PHYS, + .end = OMAP_CS3_PHYS + SZ_4K - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device nand_device = { + .name = "omapnand", + .id = 0, + .dev = { + .platform_data = &nand_data, }, .num_resources = 1, - .resource = &p2_flash_resource, + .resource = &nand_resource, }; static struct platform_device smc91x_device = { @@ -105,17 +162,55 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static struct resource kp_resources[] = { + [0] = { + .start = INT_730_MPUIO_KEYPAD, + .end = INT_730_MPUIO_KEYPAD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct omap_kp_platform_data kp_data = { + .rows = 8, + .cols = 8, + .keymap = p2_keymap, +}; + +static struct platform_device kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &kp_data, + }, + .num_resources = ARRAY_SIZE(kp_resources), + .resource = kp_resources, +}; + +static struct platform_device lcd_device = { + .name = "lcd_p2", + .id = -1, +}; + static struct platform_device *devices[] __initdata = { - &p2_flash_device, + &nor_device, + &nand_device, &smc91x_device, + &kp_device, + &lcd_device, }; +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct nand_platform_data *data) +{ + return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); +} + static struct omap_uart_config perseus2_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1)), }; static struct omap_lcd_config perseus2_lcd_config __initdata = { - .panel_name = "p2", .ctrl_name = "internal", }; @@ -126,7 +221,13 @@ static struct omap_board_config_kernel perseus2_config[] = { static void __init omap_perseus2_init(void) { - (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN))) + nand_data.dev_ready = nand_dev_ready; + + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); + omap_cfg_reg(M8_1610_FLASH_CS2B_WE); + + platform_add_devices(devices, ARRAY_SIZE(devices)); omap_board_config = perseus2_config; omap_board_config_size = ARRAY_SIZE(perseus2_config); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 52e4a9d6964..447a586eb33 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -155,9 +155,9 @@ static struct omap_uart_config voiceblue_uart_config __initdata = { }; static struct omap_board_config_kernel voiceblue_config[] = { - { OMAP_TAG_USB, &voiceblue_usb_config }, - { OMAP_TAG_MMC, &voiceblue_mmc_config }, - { OMAP_TAG_UART, &voiceblue_uart_config }, + { OMAP_TAG_USB, &voiceblue_usb_config }, + { OMAP_TAG_MMC, &voiceblue_mmc_config }, + { OMAP_TAG_UART, &voiceblue_uart_config }, }; static void __init voiceblue_init_irq(void) @@ -235,7 +235,7 @@ static struct notifier_block panic_block = { static int __init voiceblue_setup(void) { /* Setup panic notifier */ - atomic_notifier_chain_register(&panic_notifier_list, &panic_block); + notifier_chain_register(&panic_notifier_list, &panic_block); return 0; } diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 75110ba1042..619db18144e 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -345,7 +345,7 @@ static unsigned calc_ext_dsor(unsigned long rate) */ for (dsor = 2; dsor < 96; ++dsor) { if ((dsor & 1) && dsor > 8) - continue; + continue; if (rate >= 96000000 / dsor) break; } @@ -687,6 +687,11 @@ int __init omap1_clk_init(void) clk_register(*clkp); continue; } + + if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) { + clk_register(*clkp); + continue; + } } info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); @@ -784,7 +789,7 @@ int __init omap1_clk_init(void) clk_enable(&armxor_ck.clk); clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) clk_enable(&arm_gpio_ck); return 0; diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 4f18d1b9444..b7c68819c4e 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -151,7 +151,7 @@ static struct clk ck_ref = { .name = "ck_ref", .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .enable = &omap1_clk_enable_generic, .disable = &omap1_clk_disable_generic, }; @@ -160,7 +160,7 @@ static struct clk ck_dpll1 = { .name = "ck_dpll1", .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_PROPAGATES | ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED, .enable = &omap1_clk_enable_generic, .disable = &omap1_clk_disable_generic, }; @@ -183,7 +183,8 @@ static struct clk arm_ck = { .name = "arm_ck", .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES | + ALWAYS_ENABLED, .rate_offset = CKCTL_ARMDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .enable = &omap1_clk_enable_generic, @@ -195,7 +196,8 @@ static struct arm_idlect1_clk armper_ck = { .name = "armper_ck", .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_CKCTL | CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP310 | RATE_CKCTL | + CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_PERCK, .rate_offset = CKCTL_PERDIV_OFFSET, @@ -209,7 +211,7 @@ static struct arm_idlect1_clk armper_ck = { static struct clk arm_gpio_ck = { .name = "arm_gpio_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_GPIOCK, .recalc = &followparent_recalc, @@ -222,7 +224,7 @@ static struct arm_idlect1_clk armxor_ck = { .name = "armxor_ck", .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, @@ -237,7 +239,7 @@ static struct arm_idlect1_clk armtim_ck = { .name = "armtim_ck", .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, @@ -252,7 +254,7 @@ static struct arm_idlect1_clk armwdt_ck = { .name = "armwdt_ck", .parent = &ck_ref, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_WDTCK, .recalc = &omap1_watchdog_recalc, @@ -344,9 +346,9 @@ static struct arm_idlect1_clk tc_ck = { .name = "tc_ck", .parent = &ck_dpll1, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IN_OMAP730 | RATE_CKCTL | - RATE_PROPAGATES | ALWAYS_ENABLED | - CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 | + RATE_CKCTL | RATE_PROPAGATES | + ALWAYS_ENABLED | CLOCK_IDLE_CONTROL, .rate_offset = CKCTL_TCDIV_OFFSET, .recalc = &omap1_ckctl_recalc, .enable = &omap1_clk_enable_generic, @@ -358,7 +360,8 @@ static struct arm_idlect1_clk tc_ck = { static struct clk arminth_ck1510 = { .name = "arminth_ck", .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | + ALWAYS_ENABLED, .recalc = &followparent_recalc, /* Note: On 1510 the frequency follows TC_CK * @@ -372,7 +375,8 @@ static struct clk tipb_ck = { /* No-idle controlled by "tc_ck" */ .name = "tibp_ck", .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | + ALWAYS_ENABLED, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_generic, .disable = &omap1_clk_disable_generic, @@ -417,7 +421,7 @@ static struct clk dma_ck = { .name = "dma_ck", .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | ALWAYS_ENABLED, .recalc = &followparent_recalc, .enable = &omap1_clk_enable_generic, .disable = &omap1_clk_disable_generic, @@ -437,7 +441,7 @@ static struct arm_idlect1_clk api_ck = { .name = "api_ck", .parent = &tc_ck.clk, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - CLOCK_IDLE_CONTROL, + CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_APICK, .recalc = &followparent_recalc, @@ -451,7 +455,8 @@ static struct arm_idlect1_clk lb_ck = { .clk = { .name = "lb_ck", .parent = &tc_ck.clk, - .flags = CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | + CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LBCK, .recalc = &followparent_recalc, @@ -495,8 +500,8 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .clk = { .name = "lcd_ck", .parent = &ck_dpll1, - .flags = CLOCK_IN_OMAP1510 | RATE_CKCTL | - CLOCK_IDLE_CONTROL, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | + RATE_CKCTL | CLOCK_IDLE_CONTROL, .enable_reg = (void __iomem *)ARM_IDLECT2, .enable_bit = EN_LCDCK, .rate_offset = CKCTL_LCDDIV_OFFSET, @@ -512,8 +517,9 @@ static struct clk uart1_1510 = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | - ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | + ENABLE_REG_32BIT | ALWAYS_ENABLED | + CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -544,8 +550,8 @@ static struct clk uart2_ck = { .parent = &armper_ck.clk, .rate = 12000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - ENABLE_REG_32BIT | ALWAYS_ENABLED | - CLOCK_NO_IDLE_PARENT, + CLOCK_IN_OMAP310 | ENABLE_REG_32BIT | + ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -559,8 +565,9 @@ static struct clk uart3_1510 = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | - ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | + ENABLE_REG_32BIT | ALWAYS_ENABLED | + CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ .set_rate = &omap1_set_uart_rate, @@ -590,7 +597,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ /* Direct from ULPD, no parent */ .rate = 6000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT, + CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)ULPD_CLOCK_CTRL, .enable_bit = USB_MCLK_EN_BIT, .enable = &omap1_clk_enable_generic, @@ -601,7 +608,7 @@ static struct clk usb_hhc_ck1510 = { .name = "usb_hhc_ck", /* Direct from ULPD, no parent */ .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = CLOCK_IN_OMAP1510 | + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = USB_HOST_HHC_UHOST_EN, @@ -637,7 +644,9 @@ static struct clk mclk_1510 = { .name = "mclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, + .enable_reg = (void __iomem *)SOFT_REQ_REG, + .enable_bit = 6, .enable = &omap1_clk_enable_generic, .disable = &omap1_clk_disable_generic, }; @@ -659,7 +668,7 @@ static struct clk bclk_1510 = { .name = "bclk", /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = CLOCK_IN_OMAP1510 | RATE_FIXED, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED, .enable = &omap1_clk_enable_generic, .disable = &omap1_clk_disable_generic, }; @@ -678,12 +687,14 @@ static struct clk bclk_16xx = { }; static struct clk mmc1_ck = { - .name = "mmc1_ck", + .name = "mmc_ck", + .id = 1, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, .enable_reg = (void __iomem *)MOD_CONF_CTRL_0, .enable_bit = 23, .enable = &omap1_clk_enable_generic, @@ -691,7 +702,8 @@ static struct clk mmc1_ck = { }; static struct clk mmc2_ck = { - .name = "mmc2_ck", + .name = "mmc_ck", + .id = 2, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, @@ -706,7 +718,7 @@ static struct clk mmc2_ck = { static struct clk virtual_ck_mpu = { .name = "mpu", .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | - VIRTUAL_CLOCK | ALWAYS_ENABLED, + CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED, .parent = &arm_ck, /* Is smarter alias for */ .recalc = &followparent_recalc, .set_rate = &omap1_select_table_rate, @@ -715,6 +727,20 @@ static struct clk virtual_ck_mpu = { .disable = &omap1_clk_disable_generic, }; +/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK +remains active during MPU idle whenever this is enabled */ +static struct clk i2c_fck = { + .name = "i2c_fck", + .id = 1, + .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | + VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT | + ALWAYS_ENABLED, + .parent = &armxor_ck.clk, + .recalc = &followparent_recalc, + .enable = &omap1_clk_enable_generic, + .disable = &omap1_clk_disable_generic, +}; + static struct clk * onchip_clks[] = { /* non-ULPD clocks */ &ck_ref, @@ -763,6 +789,7 @@ static struct clk * onchip_clks[] = { &mmc2_ck, /* Virtual clocks */ &virtual_ck_mpu, + &i2c_fck, }; #endif diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index ecbc47514ad..876c38da14f 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -99,6 +99,45 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif +#if defined(CONFIG_OMAP_STI) + +#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000) +#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400) + +static struct resource sti_resources[] = { + { + .start = OMAP1_STI_BASE, + .end = OMAP1_STI_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP1_STI_CHANNEL_BASE, + .end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_STI, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device sti_device = { + .name = "sti", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(sti_resources), + .resource = sti_resources, +}; + +static inline void omap_init_sti(void) +{ + platform_device_register(&sti_device); +} +#else +static inline void omap_init_sti(void) {} +#endif /*-------------------------------------------------------------------------*/ @@ -129,6 +168,7 @@ static int __init omap1_init_devices(void) */ omap_init_irda(); omap_init_rtc(); + omap_init_sti(); return 0; } diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 82d556be79c..be3a2a4ee2b 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,6 +18,7 @@ #include <asm/io.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> +#include <asm/arch/omapfb.h> extern int omap1_clk_init(void); extern void omap_check_revision(void); @@ -110,7 +111,7 @@ void __init omap1_map_common_io(void) } #endif #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); } #endif @@ -121,6 +122,7 @@ void __init omap1_map_common_io(void) #endif omap_sram_init(); + omapfb_reserve_mem(); } /* diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index ed65a7d2e94..a0431c00fa8 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -60,7 +60,7 @@ struct omap_irq_bank { unsigned long wake_enable; }; -static unsigned int irq_bank_count = 0; +static unsigned int irq_bank_count; static struct omap_irq_bank *irq_banks; static inline unsigned int irq_bank_readl(int bank, int offset) @@ -142,28 +142,28 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) #ifdef CONFIG_ARCH_OMAP730 static struct omap_irq_bank omap730_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, }; #endif #ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, }; static struct omap_irq_bank omap310_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, }; #endif #if defined(CONFIG_ARCH_OMAP16XX) static struct omap_irq_bank omap1610_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff }, { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, }; diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index d4b8d624e74..10fe0b3efca 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -35,16 +35,20 @@ #ifdef CONFIG_ARCH_OMAP730 struct pin_config __initdata_or_module omap730_pins[] = { -MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 0, 20, 1, NA, 0, 0) -MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 0, 24, 1, NA, 0, 0) -MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 0, 28, 1, NA, 0, 0) -MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 0, 1, NA, 0, 0) -MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 0, 4, 1, NA, 0, 0) -MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 0, 8, 1, NA, 0, 0) -MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 0, 12, 1, NA, 0, 0) -MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 0, 16, 1, NA, 0, 0) -MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 0, 20, 1, NA, 0, 0) -MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 0, 24, 1, NA, 0, 0) +MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; #endif @@ -73,8 +77,8 @@ MUX_CFG("UART3_BCLK", A, 0, 0, 2, 6, 0, NA, 0, 0) MUX_CFG("Y15_1610_UART3_RTS", A, 0, 1, 2, 6, 0, NA, 0, 0) /* PWT & PWL, conflicts with UART3 */ -MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) -MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) +MUX_CFG("PWT", 6, 0, 2, 0, 30, 0, NA, 0, 0) +MUX_CFG("PWL", 6, 3, 1, 0, 31, 1, NA, 0, 0) /* USB internal master generic */ MUX_CFG("R18_USB_VBUS", 7, 9, 2, 1, 11, 0, NA, 0, 1) @@ -151,7 +155,7 @@ MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1) /* Misc ballouts */ MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1) -MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) +MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0) /* OMAP-1610 MMC2 */ MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c new file mode 100644 index 00000000000..ddf6b07dc9c --- /dev/null +++ b/arch/arm/mach-omap1/pm.c @@ -0,0 +1,770 @@ +/* + * linux/arch/arm/mach-omap1/pm.c + * + * OMAP Power Management Routines + * + * Original code for the SA11x0: + * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> + * + * Modified for the PXA250 by Nicolas Pitre: + * Copyright (c) 2002 Monta Vista Software, Inc. + * + * Modified for the OMAP1510 by David Singleton: + * Copyright (c) 2002 Monta Vista Software, Inc. + * + * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/pm.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/pm.h> +#include <linux/interrupt.h> +#include <linux/sysfs.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/atomic.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/irqs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> +#include <asm/arch/tc.h> +#include <asm/arch/pm.h> +#include <asm/arch/mux.h> +#include <asm/arch/tps65010.h> +#include <asm/arch/dma.h> +#include <asm/arch/dsp_common.h> +#include <asm/arch/dmtimer.h> + +static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; +static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; +static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; +static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; +static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; +static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; + +static unsigned short enable_dyn_sleep = 1; + +static ssize_t omap_pm_sleep_while_idle_show(struct subsystem * subsys, char *buf) +{ + return sprintf(buf, "%hu\n", enable_dyn_sleep); +} + +static ssize_t omap_pm_sleep_while_idle_store(struct subsystem * subsys, + const char * buf, + size_t n) +{ + unsigned short value; + if (sscanf(buf, "%hu", &value) != 1 || + (value != 0 && value != 1)) { + printk(KERN_ERR "idle_sleep_store: Invalid value\n"); + return -EINVAL; + } + enable_dyn_sleep = value; + return n; +} + +static struct subsys_attribute sleep_while_idle_attr = { + .attr = { + .name = __stringify(sleep_while_idle), + .mode = 0644, + }, + .show = omap_pm_sleep_while_idle_show, + .store = omap_pm_sleep_while_idle_store, +}; + +extern struct subsystem power_subsys; +static void (*omap_sram_idle)(void) = NULL; +static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; + +/* + * Let's power down on idle, but only if we are really + * idle, because once we start down the path of + * going idle we continue to do idle even if we get + * a clock tick interrupt . . + */ +void omap_pm_idle(void) +{ + extern __u32 arm_idlect1_mask; + __u32 use_idlect1 = arm_idlect1_mask; +#ifndef CONFIG_OMAP_MPU_TIMER + int do_sleep; +#endif + + local_irq_disable(); + local_fiq_disable(); + if (need_resched()) { + local_fiq_enable(); + local_irq_enable(); + return; + } + + /* + * Since an interrupt may set up a timer, we don't want to + * reprogram the hardware timer with interrupts enabled. + * Re-enable interrupts only after returning from idle. + */ + timer_dyn_reprogram(); + +#ifdef CONFIG_OMAP_MPU_TIMER +#warning Enable 32kHz OS timer in order to allow sleep states in idle + use_idlect1 = use_idlect1 & ~(1 << 9); +#else + + do_sleep = 0; + while (enable_dyn_sleep) { + +#ifdef CONFIG_CBUS_TAHVO_USB + extern int vbus_active; + /* Clock requirements? */ + if (vbus_active) + break; +#endif + do_sleep = 1; + break; + } + +#ifdef CONFIG_OMAP_DM_TIMER + use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1); +#endif + + if (omap_dma_running()) { + use_idlect1 &= ~(1 << 6); + if (omap_lcd_dma_ext_running()) + use_idlect1 &= ~(1 << 12); + } + + /* We should be able to remove the do_sleep variable and multiple + * tests above as soon as drivers, timer and DMA code have been fixed. + * Even the sleep block count should become obsolete. */ + if ((use_idlect1 != ~0) || !do_sleep) { + + __u32 saved_idlect1 = omap_readl(ARM_IDLECT1); + if (cpu_is_omap15xx()) + use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST; + else + use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL; + omap_writel(use_idlect1, ARM_IDLECT1); + __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); + omap_writel(saved_idlect1, ARM_IDLECT1); + + local_fiq_enable(); + local_irq_enable(); + return; + } + omap_sram_suspend(omap_readl(ARM_IDLECT1), + omap_readl(ARM_IDLECT2)); +#endif + + local_fiq_enable(); + local_irq_enable(); +} + +/* + * Configuration of the wakeup event is board specific. For the + * moment we put it into this helper function. Later it may move + * to board specific files. + */ +static void omap_pm_wakeup_setup(void) +{ + u32 level1_wake = 0; + u32 level2_wake = OMAP_IRQ_BIT(INT_UART2); + + /* + * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade, + * and the L2 wakeup interrupts: keypad and UART2. Note that the + * drivers must still separately call omap_set_gpio_wakeup() to + * wake up to a GPIO interrupt. + */ + if (cpu_is_omap730()) + level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_730_IH2_IRQ); + else if (cpu_is_omap15xx()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1510_IH2_IRQ); + else if (cpu_is_omap16xx()) + level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_1610_IH2_IRQ); + + omap_writel(~level1_wake, OMAP_IH1_MIR); + + if (cpu_is_omap730()) { + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | + OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), + OMAP_IH2_1_MIR); + } else if (cpu_is_omap15xx()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); + omap_writel(~level2_wake, OMAP_IH2_MIR); + } else if (cpu_is_omap16xx()) { + level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); + omap_writel(~level2_wake, OMAP_IH2_0_MIR); + + /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */ + omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), + OMAP_IH2_1_MIR); + omap_writel(~0x0, OMAP_IH2_2_MIR); + omap_writel(~0x0, OMAP_IH2_3_MIR); + } + + /* New IRQ agreement, recalculate in cascade order */ + omap_writel(1, OMAP_IH2_CONTROL); + omap_writel(1, OMAP_IH1_CONTROL); +} + +#define EN_DSPCK 13 /* ARM_CKCTL */ +#define EN_APICK 6 /* ARM_IDLECT2 */ +#define DSP_EN 1 /* ARM_RSTCT1 */ + +void omap_pm_suspend(void) +{ + unsigned long arg0 = 0, arg1 = 0; + + printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev); + + omap_serial_wake_trigger(1); + + if (machine_is_omap_osk()) { + /* Stop LED1 (D9) blink */ + tps65010_set_led(LED1, OFF); + } + + omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG); + + /* + * Step 1: turn off interrupts (FIXME: NOTE: already disabled) + */ + + local_irq_disable(); + local_fiq_disable(); + + /* + * Step 2: save registers + * + * The omap is a strange/beautiful device. The caches, memory + * and register state are preserved across power saves. + * We have to save and restore very little register state to + * idle the omap. + * + * Save interrupt, MPUI, ARM and UPLD control registers. + */ + + if (cpu_is_omap730()) { + MPUI730_SAVE(OMAP_IH1_MIR); + MPUI730_SAVE(OMAP_IH2_0_MIR); + MPUI730_SAVE(OMAP_IH2_1_MIR); + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + + } else if (cpu_is_omap15xx()) { + MPUI1510_SAVE(OMAP_IH1_MIR); + MPUI1510_SAVE(OMAP_IH2_MIR); + MPUI1510_SAVE(MPUI_CTRL); + MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI1510_SAVE(MPUI_DSP_API_CONFIG); + MPUI1510_SAVE(EMIFS_CONFIG); + MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); + } else if (cpu_is_omap16xx()) { + MPUI1610_SAVE(OMAP_IH1_MIR); + MPUI1610_SAVE(OMAP_IH2_0_MIR); + MPUI1610_SAVE(OMAP_IH2_1_MIR); + MPUI1610_SAVE(OMAP_IH2_2_MIR); + MPUI1610_SAVE(OMAP_IH2_3_MIR); + MPUI1610_SAVE(MPUI_CTRL); + MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI1610_SAVE(MPUI_DSP_API_CONFIG); + MPUI1610_SAVE(EMIFS_CONFIG); + MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); + } + + ARM_SAVE(ARM_CKCTL); + ARM_SAVE(ARM_IDLECT1); + ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap15xx())) + ARM_SAVE(ARM_IDLECT3); + ARM_SAVE(ARM_EWUPCT); + ARM_SAVE(ARM_RSTCT1); + ARM_SAVE(ARM_RSTCT2); + ARM_SAVE(ARM_SYSST); + ULPD_SAVE(ULPD_CLOCK_CTRL); + ULPD_SAVE(ULPD_STATUS_REQ); + + /* (Step 3 removed - we now allow deep sleep by default) */ + + /* + * Step 4: OMAP DSP Shutdown + */ + + /* stop DSP */ + omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); + + /* shut down dsp_ck */ + omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); + + /* temporarily enabling api_ck to access DSP registers */ + omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2); + + /* save DSP registers */ + DSP_SAVE(DSP_IDLECT2); + + /* Stop all DSP domain clocks */ + __raw_writew(0, DSP_IDLECT2); + + /* + * Step 5: Wakeup Event Setup + */ + + omap_pm_wakeup_setup(); + + /* + * Step 6: ARM and Traffic controller shutdown + */ + + /* disable ARM watchdog */ + omap_writel(0x00F5, OMAP_WDT_TIMER_MODE); + omap_writel(0x00A0, OMAP_WDT_TIMER_MODE); + + /* + * Step 6b: ARM and Traffic controller shutdown + * + * Step 6 continues here. Prepare jump to power management + * assembly code in internal SRAM. + * + * Since the omap_cpu_suspend routine has been copied to + * SRAM, we'll do an indirect procedure call to it and pass the + * contents of arm_idlect1 and arm_idlect2 so it can restore + * them when it wakes up and it will return. + */ + + arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1]; + arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2]; + + /* + * Step 6c: ARM and Traffic controller shutdown + * + * Jump to assembly code. The processor will stay there + * until wake up. + */ + omap_sram_suspend(arg0, arg1); + + /* + * If we are here, processor is woken up! + */ + + /* + * Restore DSP clocks + */ + + /* again temporarily enabling api_ck to access DSP registers */ + omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2); + + /* Restore DSP domain clocks */ + DSP_RESTORE(DSP_IDLECT2); + + /* + * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did + */ + + if (!(cpu_is_omap15xx())) + ARM_RESTORE(ARM_IDLECT3); + ARM_RESTORE(ARM_CKCTL); + ARM_RESTORE(ARM_EWUPCT); + ARM_RESTORE(ARM_RSTCT1); + ARM_RESTORE(ARM_RSTCT2); + ARM_RESTORE(ARM_SYSST); + ULPD_RESTORE(ULPD_CLOCK_CTRL); + ULPD_RESTORE(ULPD_STATUS_REQ); + + if (cpu_is_omap730()) { + MPUI730_RESTORE(EMIFS_CONFIG); + MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI730_RESTORE(OMAP_IH1_MIR); + MPUI730_RESTORE(OMAP_IH2_0_MIR); + MPUI730_RESTORE(OMAP_IH2_1_MIR); + } else if (cpu_is_omap15xx()) { + MPUI1510_RESTORE(MPUI_CTRL); + MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); + MPUI1510_RESTORE(MPUI_DSP_API_CONFIG); + MPUI1510_RESTORE(EMIFS_CONFIG); + MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI1510_RESTORE(OMAP_IH1_MIR); + MPUI1510_RESTORE(OMAP_IH2_MIR); + } else if (cpu_is_omap16xx()) { + MPUI1610_RESTORE(MPUI_CTRL); + MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG); + MPUI1610_RESTORE(MPUI_DSP_API_CONFIG); + MPUI1610_RESTORE(EMIFS_CONFIG); + MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG); + + MPUI1610_RESTORE(OMAP_IH1_MIR); + MPUI1610_RESTORE(OMAP_IH2_0_MIR); + MPUI1610_RESTORE(OMAP_IH2_1_MIR); + MPUI1610_RESTORE(OMAP_IH2_2_MIR); + MPUI1610_RESTORE(OMAP_IH2_3_MIR); + } + + omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); + + /* + * Reenable interrupts + */ + + local_irq_enable(); + local_fiq_enable(); + + omap_serial_wake_trigger(0); + + printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev); + + if (machine_is_omap_osk()) { + /* Let LED1 (D9) blink again */ + tps65010_set_led(LED1, BLINK); + } +} + +#if defined(DEBUG) && defined(CONFIG_PROC_FS) +static int g_read_completed; + +/* + * Read system PM registers for debugging + */ +static int omap_pm_read_proc( + char *page_buffer, + char **my_first_byte, + off_t virtual_start, + int length, + int *eof, + void *data) +{ + int my_buffer_offset = 0; + char * const my_base = page_buffer; + + ARM_SAVE(ARM_CKCTL); + ARM_SAVE(ARM_IDLECT1); + ARM_SAVE(ARM_IDLECT2); + if (!(cpu_is_omap15xx())) + ARM_SAVE(ARM_IDLECT3); + ARM_SAVE(ARM_EWUPCT); + ARM_SAVE(ARM_RSTCT1); + ARM_SAVE(ARM_RSTCT2); + ARM_SAVE(ARM_SYSST); + + ULPD_SAVE(ULPD_IT_STATUS); + ULPD_SAVE(ULPD_CLOCK_CTRL); + ULPD_SAVE(ULPD_SOFT_REQ); + ULPD_SAVE(ULPD_STATUS_REQ); + ULPD_SAVE(ULPD_DPLL_CTRL); + ULPD_SAVE(ULPD_POWER_CTRL); + + if (cpu_is_omap730()) { + MPUI730_SAVE(MPUI_CTRL); + MPUI730_SAVE(MPUI_DSP_STATUS); + MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI730_SAVE(MPUI_DSP_API_CONFIG); + MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + MPUI730_SAVE(EMIFS_CONFIG); + } else if (cpu_is_omap15xx()) { + MPUI1510_SAVE(MPUI_CTRL); + MPUI1510_SAVE(MPUI_DSP_STATUS); + MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI1510_SAVE(MPUI_DSP_API_CONFIG); + MPUI1510_SAVE(EMIFF_SDRAM_CONFIG); + MPUI1510_SAVE(EMIFS_CONFIG); + } else if (cpu_is_omap16xx()) { + MPUI1610_SAVE(MPUI_CTRL); + MPUI1610_SAVE(MPUI_DSP_STATUS); + MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI1610_SAVE(MPUI_DSP_API_CONFIG); + MPUI1610_SAVE(EMIFF_SDRAM_CONFIG); + MPUI1610_SAVE(EMIFS_CONFIG); + } + + if (virtual_start == 0) { + g_read_completed = 0; + + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "ARM_CKCTL_REG: 0x%-8x \n" + "ARM_IDLECT1_REG: 0x%-8x \n" + "ARM_IDLECT2_REG: 0x%-8x \n" + "ARM_IDLECT3_REG: 0x%-8x \n" + "ARM_EWUPCT_REG: 0x%-8x \n" + "ARM_RSTCT1_REG: 0x%-8x \n" + "ARM_RSTCT2_REG: 0x%-8x \n" + "ARM_SYSST_REG: 0x%-8x \n" + "ULPD_IT_STATUS_REG: 0x%-4x \n" + "ULPD_CLOCK_CTRL_REG: 0x%-4x \n" + "ULPD_SOFT_REQ_REG: 0x%-4x \n" + "ULPD_DPLL_CTRL_REG: 0x%-4x \n" + "ULPD_STATUS_REQ_REG: 0x%-4x \n" + "ULPD_POWER_CTRL_REG: 0x%-4x \n", + ARM_SHOW(ARM_CKCTL), + ARM_SHOW(ARM_IDLECT1), + ARM_SHOW(ARM_IDLECT2), + ARM_SHOW(ARM_IDLECT3), + ARM_SHOW(ARM_EWUPCT), + ARM_SHOW(ARM_RSTCT1), + ARM_SHOW(ARM_RSTCT2), + ARM_SHOW(ARM_SYSST), + ULPD_SHOW(ULPD_IT_STATUS), + ULPD_SHOW(ULPD_CLOCK_CTRL), + ULPD_SHOW(ULPD_SOFT_REQ), + ULPD_SHOW(ULPD_DPLL_CTRL), + ULPD_SHOW(ULPD_STATUS_REQ), + ULPD_SHOW(ULPD_POWER_CTRL)); + + if (cpu_is_omap730()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI730_CTRL_REG 0x%-8x \n" + "MPUI730_DSP_STATUS_REG: 0x%-8x \n" + "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI730_SHOW(MPUI_CTRL), + MPUI730_SHOW(MPUI_DSP_STATUS), + MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI730_SHOW(MPUI_DSP_API_CONFIG), + MPUI730_SHOW(EMIFF_SDRAM_CONFIG), + MPUI730_SHOW(EMIFS_CONFIG)); + } else if (cpu_is_omap15xx()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI1510_CTRL_REG 0x%-8x \n" + "MPUI1510_DSP_STATUS_REG: 0x%-8x \n" + "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI1510_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI1510_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI1510_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI1510_SHOW(MPUI_CTRL), + MPUI1510_SHOW(MPUI_DSP_STATUS), + MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI1510_SHOW(MPUI_DSP_API_CONFIG), + MPUI1510_SHOW(EMIFF_SDRAM_CONFIG), + MPUI1510_SHOW(EMIFS_CONFIG)); + } else if (cpu_is_omap16xx()) { + my_buffer_offset += sprintf(my_base + my_buffer_offset, + "MPUI1610_CTRL_REG 0x%-8x \n" + "MPUI1610_DSP_STATUS_REG: 0x%-8x \n" + "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI1610_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI1610_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI1610_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI1610_SHOW(MPUI_CTRL), + MPUI1610_SHOW(MPUI_DSP_STATUS), + MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI1610_SHOW(MPUI_DSP_API_CONFIG), + MPUI1610_SHOW(EMIFF_SDRAM_CONFIG), + MPUI1610_SHOW(EMIFS_CONFIG)); + } + + g_read_completed++; + } else if (g_read_completed >= 1) { + *eof = 1; + return 0; + } + g_read_completed++; + + *my_first_byte = page_buffer; + return my_buffer_offset; +} + +static void omap_pm_init_proc(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_read_entry("driver/omap_pm", + S_IWUSR | S_IRUGO, NULL, + omap_pm_read_proc, NULL); +} + +#endif /* DEBUG && CONFIG_PROC_FS */ + +static void (*saved_idle)(void) = NULL; + +/* + * omap_pm_prepare - Do preliminary suspend work. + * @state: suspend state we're entering. + * + */ +static int omap_pm_prepare(suspend_state_t state) +{ + int error = 0; + + /* We cannot sleep in idle until we have resumed */ + saved_idle = pm_idle; + pm_idle = NULL; + + switch (state) + { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + break; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return error; +} + + +/* + * omap_pm_enter - Actually enter a sleep state. + * @state: State we're entering. + * + */ + +static int omap_pm_enter(suspend_state_t state) +{ + switch (state) + { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + omap_pm_suspend(); + break; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return 0; +} + + +/** + * omap_pm_finish - Finish up suspend sequence. + * @state: State we're coming out of. + * + * This is called after we wake back up (or if entering the sleep state + * failed). + */ + +static int omap_pm_finish(suspend_state_t state) +{ + pm_idle = saved_idle; + return 0; +} + + +static irqreturn_t omap_wakeup_interrupt(int irq, void * dev, + struct pt_regs * regs) +{ + return IRQ_HANDLED; +} + +static struct irqaction omap_wakeup_irq = { + .name = "peripheral wakeup", + .flags = SA_INTERRUPT, + .handler = omap_wakeup_interrupt +}; + + + +static struct pm_ops omap_pm_ops ={ + .pm_disk_mode = 0, + .prepare = omap_pm_prepare, + .enter = omap_pm_enter, + .finish = omap_pm_finish, +}; + +static int __init omap_pm_init(void) +{ + printk("Power Management for TI OMAP.\n"); + + /* + * We copy the assembler sleep/wakeup routines to SRAM. + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ + if (cpu_is_omap730()) { + omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, + omap730_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, + omap730_cpu_suspend_sz); + } else if (cpu_is_omap15xx()) { + omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, + omap1510_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, + omap1510_cpu_suspend_sz); + } else if (cpu_is_omap16xx()) { + omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, + omap1610_idle_loop_suspend_sz); + omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, + omap1610_cpu_suspend_sz); + } + + if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { + printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); + return -ENODEV; + } + + pm_idle = omap_pm_idle; + + if (cpu_is_omap730()) + setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + else if (cpu_is_omap16xx()) + setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); + + /* Program new power ramp-up time + * (0 for most boards since we don't lower voltage when in deep sleep) + */ + omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3); + + /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */ + omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); + + /* Configure IDLECT3 */ + if (cpu_is_omap730()) + omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + else if (cpu_is_omap16xx()) + omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); + + pm_set_ops(&omap_pm_ops); + +#if defined(DEBUG) && defined(CONFIG_PROC_FS) + omap_pm_init_proc(); +#endif + + subsys_create_file(&power_subsys, &sleep_while_idle_attr); + + if (cpu_is_omap16xx()) { + /* configure LOW_PWR pin */ + omap_cfg_reg(T20_1610_LOW_PWR); + } + + return 0; +} +__initcall(omap_pm_init); diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index e924e0c6a4c..9b4cd698bec 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -30,9 +30,9 @@ #include <asm/arch/pm.h> #endif -static struct clk * uart1_ck = NULL; -static struct clk * uart2_ck = NULL; -static struct clk * uart3_ck = NULL; +static struct clk * uart1_ck; +static struct clk * uart2_ck; +static struct clk * uart3_ck; static inline unsigned int omap_serial_in(struct plat_serial8250_port *up, int offset) diff --git a/arch/arm/plat-omap/sleep.S b/arch/arm/mach-omap1/sleep.S index 4cd7d292f85..e58295e2d3b 100644 --- a/arch/arm/plat-omap/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/plat-omap/sleep.S + * linux/arch/arm/mach-omap1/sleep.S * * Low-level OMAP730/1510/1610 sleep/wakeUp support * @@ -383,60 +383,133 @@ ENTRY(omap1610_cpu_suspend) mcr p15, 0, r0, c7, c10, 4 nop - @ load base address of Traffic Controller + @ Load base address of Traffic Controller mov r6, #TCMIF_ASM_BASE & 0xff000000 orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 - @ prepare to put SDRAM into self-refresh manually + @ Prepare to put SDRAM into self-refresh manually ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - @ prepare to put EMIFS to Sleep + @ Prepare to put EMIFS to Sleep ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 + @ Load base address of ARM_IDLECT1 and ARM_IDLECT2 mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - @ turn off clock domains - @ do not disable PERCK (0x04) + @ Turn off clock domains + @ Do not disable PERCK (0x04) mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - @ request ARM idle + @ Request ARM idle mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - @ disable instruction cache - mrc p15, 0, r9, c1, c0, 0 - bic r2, r9, #0x1000 - mcr p15, 0, r2, c1, c0, 0 - nop - /* * Let's wait for the next wake up event to wake us up. r0 can't be * used here because r0 holds ARM_IDLECT1 */ mov r2, #0 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt + + @ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions + @ according to this formula: + @ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV + @ Max DPLL_MULT = 18 + @ DPLL_DIV = 1 + @ ARMDIV = 1 + @ => 74 nop-instructions + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @10 + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @20 + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @30 + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @40 + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @50 + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @60 + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop @70 + nop + nop + nop + nop @74 /* * omap1610_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the * stack. */ - @ re-enable Icache - mcr p15, 0, r9, c1, c0, 0 - - @ reset the ARM_IDLECT1 and ARM_IDLECT2. + @ Restore the ARM_IDLECT1 and ARM_IDLECT2. strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @@ -444,7 +517,7 @@ ENTRY(omap1610_cpu_suspend) str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - @ restore regs and return + @ Restore regs and return ldmfd sp!, {r0 - r12, pc} ENTRY(omap1610_cpu_suspend_sz) diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index cdbf4d7620c..a85fe6066bc 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -51,8 +51,6 @@ struct sys_timer omap_timer; -#ifdef CONFIG_OMAP_MPU_TIMER - /* * --------------------------------------------------------------------------- * MPU timer @@ -222,195 +220,6 @@ unsigned long long sched_clock(void) return cycles_2_ns(ticks64); } -#endif /* CONFIG_OMAP_MPU_TIMER */ - -#ifdef CONFIG_OMAP_32K_TIMER - -#ifdef CONFIG_ARCH_OMAP15XX -#error OMAP 32KHz timer does not currently work on 15XX! -#endif - -/* - * --------------------------------------------------------------------------- - * 32KHz OS timer - * - * This currently works only on 16xx, as 1510 does not have the continuous - * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track - * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer - * on 1510 would be possible, but the timer would not be as accurate as - * with the 32KHz synchronized timer. - * --------------------------------------------------------------------------- - */ -#define OMAP_32K_TIMER_BASE 0xfffb9000 -#define OMAP_32K_TIMER_CR 0x08 -#define OMAP_32K_TIMER_TVR 0x00 -#define OMAP_32K_TIMER_TCR 0x04 - -#define OMAP_32K_TICKS_PER_HZ (32768 / HZ) - -/* - * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 - * so with HZ = 100, TVR = 327.68. - */ -#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1) -#define TIMER_32K_SYNCHRONIZED 0xfffbc410 - -#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ - (((nr_jiffies) * (clock_rate)) / HZ) - -static inline void omap_32k_timer_write(int val, int reg) -{ - omap_writew(val, reg + OMAP_32K_TIMER_BASE); -} - -static inline unsigned long omap_32k_timer_read(int reg) -{ - return omap_readl(reg + OMAP_32K_TIMER_BASE) & 0xffffff; -} - -/* - * The 32KHz synchronized timer is an additional timer on 16xx. - * It is always running. - */ -static inline unsigned long omap_32k_sync_timer_read(void) -{ - return omap_readl(TIMER_32K_SYNCHRONIZED); -} - -static inline void omap_32k_timer_start(unsigned long load_val) -{ - omap_32k_timer_write(load_val, OMAP_32K_TIMER_TVR); - omap_32k_timer_write(0x0f, OMAP_32K_TIMER_CR); -} - -static inline void omap_32k_timer_stop(void) -{ - omap_32k_timer_write(0x0, OMAP_32K_TIMER_CR); -} - -/* - * Rounds down to nearest usec. Note that this will overflow for larger values. - */ -static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k) -{ - return (ticks_32k * 5*5*5*5*5*5) >> 9; -} - -/* - * Rounds down to nearest nsec. - */ -static inline unsigned long long -omap_32k_ticks_to_nsecs(unsigned long ticks_32k) -{ - return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9; -} - -static unsigned long omap_32k_last_tick = 0; - -/* - * Returns elapsed usecs since last 32k timer interrupt - */ -static unsigned long omap_32k_timer_gettimeoffset(void) -{ - unsigned long now = omap_32k_sync_timer_read(); - return omap_32k_ticks_to_usecs(now - omap_32k_last_tick); -} - -/* - * Returns current time from boot in nsecs. It's OK for this to wrap - * around for now, as it's just a relative time stamp. - */ -unsigned long long sched_clock(void) -{ - return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read()); -} - -/* - * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this - * function is also called from other interrupts to remove latency - * issues with dynamic tick. In the dynamic tick case, we need to lock - * with irqsave. - */ -static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) -{ - unsigned long flags; - unsigned long now; - - write_seqlock_irqsave(&xtime_lock, flags); - now = omap_32k_sync_timer_read(); - - while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { - omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; - timer_tick(regs); - } - - /* Restart timer so we don't drift off due to modulo or dynamic tick. - * By default we program the next timer to be continuous to avoid - * latencies during high system load. During dynamic tick operation the - * continuous timer can be overridden from pm_idle to be longer. - */ - omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now); - write_sequnlock_irqrestore(&xtime_lock, flags); - - return IRQ_HANDLED; -} - -#ifdef CONFIG_NO_IDLE_HZ -/* - * Programs the next timer interrupt needed. Called when dynamic tick is - * enabled, and to reprogram the ticks to skip from pm_idle. Note that - * we can keep the timer continuous, and don't need to set it to run in - * one-shot mode. This is because the timer will get reprogrammed again - * after next interrupt. - */ -void omap_32k_timer_reprogram(unsigned long next_tick) -{ - omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); -} - -static struct irqaction omap_32k_timer_irq; -extern struct timer_update_handler timer_update; - -static int omap_32k_timer_enable_dyn_tick(void) -{ - /* No need to reprogram timer, just use the next interrupt */ - return 0; -} - -static int omap_32k_timer_disable_dyn_tick(void) -{ - omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); - return 0; -} - -static struct dyn_tick_timer omap_dyn_tick_timer = { - .enable = omap_32k_timer_enable_dyn_tick, - .disable = omap_32k_timer_disable_dyn_tick, - .reprogram = omap_32k_timer_reprogram, - .handler = omap_32k_timer_interrupt, -}; -#endif /* CONFIG_NO_IDLE_HZ */ - -static struct irqaction omap_32k_timer_irq = { - .name = "32KHz timer", - .flags = SA_INTERRUPT | SA_TIMER, - .handler = omap_32k_timer_interrupt, -}; - -static __init void omap_init_32k_timer(void) -{ - -#ifdef CONFIG_NO_IDLE_HZ - omap_timer.dyn_tick = &omap_dyn_tick_timer; -#endif - - setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); - omap_timer.offset = omap_32k_timer_gettimeoffset; - omap_32k_last_tick = omap_32k_sync_timer_read(); - omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); -} -#endif /* CONFIG_OMAP_32K_TIMER */ /* * --------------------------------------------------------------------------- @@ -419,13 +228,7 @@ static __init void omap_init_32k_timer(void) */ static void __init omap_timer_init(void) { -#if defined(CONFIG_OMAP_MPU_TIMER) omap_init_mpu_timer(); -#elif defined(CONFIG_OMAP_32K_TIMER) - omap_init_32k_timer(); -#else -#error No system timer selected in Kconfig! -#endif } struct sys_timer omap_timer = { diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 578880943cf..537dd2e6d38 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -20,3 +20,6 @@ config MACH_OMAP_H4 bool "OMAP 2420 H4 board" depends on ARCH_OMAP2 && ARCH_OMAP24XX +config MACH_OMAP_APOLLON + bool "OMAP 2420 Apollon board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 42041166435..111eaa64258 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,11 +3,15 @@ # # Common support -obj-y := irq.o id.o io.o sram-fn.o clock.o mux.o devices.o serial.o +obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o obj-$(CONFIG_OMAP_MPU_TIMER) += timer-gp.o +# Power Management +obj-$(CONFIG_PM) += pm.o sleep.o + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o +obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c new file mode 100644 index 00000000000..6c6ba172cdf --- /dev/null +++ b/arch/arm/mach-omap2/board-apollon.c @@ -0,0 +1,285 @@ +/* + * linux/arch/arm/mach-omap/omap2/board-apollon.c + * + * Copyright (C) 2005,2006 Samsung Electronics + * Author: Kyungmin Park <kyungmin.park@samsung.com> + * + * Modified from mach-omap/omap2/board-h4.c + * + * Code for apollon OMAP2 board. Should work on many OMAP2 systems where + * the bootloader passes the board-specific data to the kernel. + * Do not put any board specific code to this file; create a new machine + * type if you need custom low-level initializations. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/onenand.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/usb.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include "prcm-regs.h" + +/* LED & Switch macros */ +#define LED0_GPIO13 13 +#define LED1_GPIO14 14 +#define LED2_GPIO15 15 +#define SW_ENTER_GPIO16 16 +#define SW_UP_GPIO17 17 +#define SW_DOWN_GPIO58 58 + +static struct mtd_partition apollon_partitions[] = { + { + .name = "X-Loader + U-Boot", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = SZ_16M, + }, + { + .name = "filesystem00", + .offset = MTDPART_OFS_APPEND, + .size = SZ_32M, + }, + { + .name = "filesystem01", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data apollon_flash_data = { + .parts = apollon_partitions, + .nr_parts = ARRAY_SIZE(apollon_partitions), +}; + +static struct resource apollon_flash_resource = { + .start = APOLLON_CS0_BASE, + .end = APOLLON_CS0_BASE + SZ_128K, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device apollon_onenand_device = { + .name = "onenand", + .id = -1, + .dev = { + .platform_data = &apollon_flash_data, + }, + .num_resources = ARRAY_SIZE(&apollon_flash_resource), + .resource = &apollon_flash_resource, +}; + +static struct resource apollon_smc91x_resources[] = { + [0] = { + .start = APOLLON_ETHR_START, /* Physical */ + .end = APOLLON_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device apollon_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(apollon_smc91x_resources), + .resource = apollon_smc91x_resources, +}; + +static struct platform_device apollon_lcd_device = { + .name = "apollon_lcd", + .id = -1, +}; + +static struct platform_device *apollon_devices[] __initdata = { + &apollon_onenand_device, + &apollon_smc91x_device, + &apollon_lcd_device, +}; + +static inline void __init apollon_init_smc91x(void) +{ + /* Make sure CS1 timings are correct */ + GPMC_CONFIG1_1 = 0x00011203; + GPMC_CONFIG2_1 = 0x001f1f01; + GPMC_CONFIG3_1 = 0x00080803; + GPMC_CONFIG4_1 = 0x1c091c09; + GPMC_CONFIG5_1 = 0x041f1f1f; + GPMC_CONFIG6_1 = 0x000004c4; + GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24); + udelay(100); + + omap_cfg_reg(W4__24XX_GPIO74); + if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + APOLLON_ETHR_GPIO_IRQ); + return; + } + omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); +} + +static void __init omap_apollon_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); + apollon_init_smc91x(); +} + +static struct omap_uart_config apollon_uart_config __initdata = { + .enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2), +}; + +static struct omap_mmc_config apollon_mmc_config __initdata = { + .mmc [0] = { + .enabled = 0, + .wire4 = 0, + .wp_pin = -1, + .power_pin = -1, + .switch_pin = -1, + }, +}; + +static struct omap_lcd_config apollon_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct omap_board_config_kernel apollon_config[] = { + { OMAP_TAG_UART, &apollon_uart_config }, + { OMAP_TAG_MMC, &apollon_mmc_config }, + { OMAP_TAG_LCD, &apollon_lcd_config }, +}; + +static void __init apollon_led_init(void) +{ + /* LED0 - AA10 */ + omap_cfg_reg(AA10_242X_GPIO13); + omap_request_gpio(LED0_GPIO13); + omap_set_gpio_direction(LED0_GPIO13, 0); + omap_set_gpio_dataout(LED0_GPIO13, 0); + /* LED1 - AA6 */ + omap_cfg_reg(AA6_242X_GPIO14); + omap_request_gpio(LED1_GPIO14); + omap_set_gpio_direction(LED1_GPIO14, 0); + omap_set_gpio_dataout(LED1_GPIO14, 0); + /* LED2 - AA4 */ + omap_cfg_reg(AA4_242X_GPIO15); + omap_request_gpio(LED2_GPIO15); + omap_set_gpio_direction(LED2_GPIO15, 0); + omap_set_gpio_dataout(LED2_GPIO15, 0); +} + +static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + static unsigned int led0, led1, led2; + + if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) + omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); + else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) + omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); + else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) + omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); + + return IRQ_HANDLED; +} + +static void __init apollon_sw_init(void) +{ + /* Enter SW - Y11 */ + omap_cfg_reg(Y11_242X_GPIO16); + omap_request_gpio(SW_ENTER_GPIO16); + omap_set_gpio_direction(SW_ENTER_GPIO16, 1); + /* Up SW - AA12 */ + omap_cfg_reg(AA12_242X_GPIO17); + omap_request_gpio(SW_UP_GPIO17); + omap_set_gpio_direction(SW_UP_GPIO17, 1); + /* Down SW - AA8 */ + omap_cfg_reg(AA8_242X_GPIO58); + omap_request_gpio(SW_DOWN_GPIO58); + omap_set_gpio_direction(SW_DOWN_GPIO58, 1); + + set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, + SA_SHIRQ, "enter sw", + &apollon_sw_interrupt)) + return; + set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, + SA_SHIRQ, "up sw", + &apollon_sw_interrupt)) + return; + set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING); + if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, + SA_SHIRQ, "down sw", + &apollon_sw_interrupt)) + return; +} + +static void __init omap_apollon_init(void) +{ + apollon_led_init(); + apollon_sw_init(); + + /* REVISIT: where's the correct place */ + omap_cfg_reg(W19_24XX_SYS_NIRQ); + + /* + * Make sure the serial ports are muxed on at this point. + * You have to mux them off in device drivers later on + * if not needed. + */ + platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); + omap_board_config = apollon_config; + omap_board_config_size = ARRAY_SIZE(apollon_config); + omap_serial_init(); +} + +static void __init omap_apollon_map_io(void) +{ + omap2_map_common_io(); +} + +MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_apollon_map_io, + .init_irq = omap_apollon_init_irq, + .init_machine = omap_apollon_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index a300d634d8a..4933fce766c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -17,6 +17,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/input.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -25,15 +27,57 @@ #include <asm/mach/flash.h> #include <asm/arch/gpio.h> +#include <asm/arch/gpioexpander.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> +#include <asm/arch/irda.h> #include <asm/arch/board.h> #include <asm/arch/common.h> -#include <asm/arch/prcm.h> +#include <asm/arch/keypad.h> +#include <asm/arch/menelaus.h> +#include <asm/arch/dma.h> +#include "prcm-regs.h" #include <asm/io.h> #include <asm/delay.h> +static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; +static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; + +static int h4_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(0, 4, KEY_C), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(1, 4, KEY_G), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(2, 4, KEY_3), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), + KEY(3, 4, KEY_Q), + KEY(4, 0, KEY_R), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_T), + KEY(4, 3, KEY_U), + KEY(4, 4, KEY_ENTER), + KEY(5, 0, KEY_V), + KEY(5, 1, KEY_W), + KEY(5, 2, KEY_L), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_ENTER), + 0 +}; + static struct mtd_partition h4_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -108,9 +152,123 @@ static struct platform_device h4_smc91x_device = { .resource = h4_smc91x_resources, }; +/* Select between the IrDA and aGPS module + */ +static int h4_select_irda(struct device *dev, int state) +{ + unsigned char expa; + int err = 0; + + if ((err = read_gpio_expa(&expa, 0x21))) { + printk(KERN_ERR "Error reading from I/O expander\n"); + return err; + } + + /* 'P6' enable/disable IRDA_TX and IRDA_RX */ + if (state & IR_SEL) { /* IrDa */ + if ((err = write_gpio_expa(expa | 0x01, 0x21))) { + printk(KERN_ERR "Error writing to I/O expander\n"); + return err; + } + } else { + if ((err = write_gpio_expa(expa & ~0x01, 0x21))) { + printk(KERN_ERR "Error writing to I/O expander\n"); + return err; + } + } + return err; +} + +static void set_trans_mode(void *data) +{ + int *mode = data; + unsigned char expa; + int err = 0; + + if ((err = read_gpio_expa(&expa, 0x20)) != 0) { + printk(KERN_ERR "Error reading from I/O expander\n"); + } + + expa &= ~0x01; + + if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */ + expa |= 0x01; + } + + if ((err = write_gpio_expa(expa, 0x20)) != 0) { + printk(KERN_ERR "Error writing to I/O expander\n"); + } +} + +static int h4_transceiver_mode(struct device *dev, int mode) +{ + struct omap_irda_config *irda_config = dev->platform_data; + + cancel_delayed_work(&irda_config->gpio_expa); + PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode); + schedule_work(&irda_config->gpio_expa); + + return 0; +} + +static struct omap_irda_config h4_irda_data = { + .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, + .transceiver_mode = h4_transceiver_mode, + .select_irda = h4_select_irda, + .rx_channel = OMAP24XX_DMA_UART3_RX, + .tx_channel = OMAP24XX_DMA_UART3_TX, + .dest_start = OMAP_UART3_BASE, + .src_start = OMAP_UART3_BASE, + .tx_trigger = OMAP24XX_DMA_UART3_TX, + .rx_trigger = OMAP24XX_DMA_UART3_RX, +}; + +static struct resource h4_irda_resources[] = { + [0] = { + .start = INT_24XX_UART3_IRQ, + .end = INT_24XX_UART3_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h4_irda_device = { + .name = "omapirda", + .id = -1, + .dev = { + .platform_data = &h4_irda_data, + }, + .num_resources = 1, + .resource = h4_irda_resources, +}; + +static struct omap_kp_platform_data h4_kp_data = { + .rows = 6, + .cols = 7, + .keymap = h4_keymap, + .rep = 1, + .row_gpios = row_gpios, + .col_gpios = col_gpios, +}; + +static struct platform_device h4_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &h4_kp_data, + }, +}; + +static struct platform_device h4_lcd_device = { + .name = "lcd_h4", + .id = -1, +}; + static struct platform_device *h4_devices[] __initdata = { &h4_smc91x_device, &h4_flash_device, + &h4_irda_device, + &h4_kp_device, + &h4_lcd_device, }; static inline void __init h4_init_smc91x(void) @@ -157,7 +315,6 @@ static struct omap_mmc_config h4_mmc_config __initdata = { }; static struct omap_lcd_config h4_lcd_config __initdata = { - .panel_name = "h4", .ctrl_name = "internal", }; @@ -174,6 +331,19 @@ static void __init omap_h4_init(void) * You have to mux them off in device drivers later on * if not needed. */ +#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) + omap_cfg_reg(K15_24XX_UART3_TX); + omap_cfg_reg(K14_24XX_UART3_RX); +#endif + +#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) + if (omap_has_menelaus()) { + row_gpios[5] = 0; + col_gpios[2] = 15; + col_gpios[6] = 18; + } +#endif + platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); omap_board_config = h4_config; omap_board_config_size = ARRAY_SIZE(h4_config); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 180f675c906..72eb4bf571a 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -28,14 +28,14 @@ #include <asm/arch/clock.h> #include <asm/arch/sram.h> -#include <asm/arch/prcm.h> +#include "prcm-regs.h" +#include "memory.h" #include "clock.h" //#define DOWN_VARIABLE_DPLL 1 /* Experimental */ static struct prcm_config *curr_prcm_set; -static struct memory_timings mem_timings; static u32 curr_perf_level = PRCM_FULL_SPEED; /*------------------------------------------------------------------------- @@ -54,11 +54,13 @@ static void omap2_sys_clk_recalc(struct clk * clk) static u32 omap2_get_dpll_rate(struct clk * tclk) { - int dpll_clk, dpll_mult, dpll_div, amult; + long long dpll_clk; + int dpll_mult, dpll_div, amult; dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ - dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1); + dpll_clk = (long long)tclk->parent->rate * dpll_mult; + do_div(dpll_clk, dpll_div + 1); amult = CM_CLKSEL2_PLL & 0x3; dpll_clk *= amult; @@ -385,75 +387,23 @@ static u32 omap2_dll_force_needed(void) return 0; } -static void omap2_init_memory_params(u32 force_lock_to_unlock_mode) -{ - unsigned long dll_cnt; - u32 fast_dll = 0; - - mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ - - /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. - * In the case of 2422, its ok to use CS1 instead of CS0. - */ - -#if 0 /* FIXME: Enable after 24xx cpu detection works */ - ctype = get_cpu_type(); - if (cpu_is_omap2422()) - mem_timings.base_cs = 1; - else -#endif - mem_timings.base_cs = 0; - - if (mem_timings.m_type != M_DDR) - return; - - /* With DDR we need to determine the low frequency DLL value */ - if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) - mem_timings.dll_mode = M_UNLOCK; - else - mem_timings.dll_mode = M_LOCK; - - if (mem_timings.base_cs == 0) { - fast_dll = SDRC_DLLA_CTRL; - dll_cnt = SDRC_DLLA_STATUS & 0xff00; - } else { - fast_dll = SDRC_DLLB_CTRL; - dll_cnt = SDRC_DLLB_STATUS & 0xff00; - } - if (force_lock_to_unlock_mode) { - fast_dll &= ~0xff00; - fast_dll |= dll_cnt; /* Current lock mode */ - } - mem_timings.fast_dll_ctrl = fast_dll; - - /* No disruptions, DDR will be offline & C-ABI not followed */ - omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, - mem_timings.fast_dll_ctrl, - mem_timings.base_cs, - force_lock_to_unlock_mode); - mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ - - /* Turn status into unlock ctrl */ - mem_timings.slow_dll_ctrl |= - ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); - - /* 90 degree phase for anything below 133Mhz */ - mem_timings.slow_dll_ctrl |= (1 << 1); -} - static u32 omap2_reprogram_sdrc(u32 level, u32 force) { + u32 slow_dll_ctrl, fast_dll_ctrl, m_type; u32 prev = curr_perf_level, flags; if ((curr_perf_level == level) && !force) return prev; + m_type = omap2_memory_get_type(); + slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl(); + fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl(); + if (level == PRCM_HALF_SPEED) { local_irq_save(flags); PRCM_VOLTSETUP = 0xffff; omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED, - mem_timings.slow_dll_ctrl, - mem_timings.m_type); + slow_dll_ctrl, m_type); curr_perf_level = PRCM_HALF_SPEED; local_irq_restore(flags); } @@ -461,8 +411,7 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force) local_irq_save(flags); PRCM_VOLTSETUP = 0xffff; omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED, - mem_timings.fast_dll_ctrl, - mem_timings.m_type); + fast_dll_ctrl, m_type); curr_perf_level = PRCM_FULL_SPEED; local_irq_restore(flags); } @@ -650,7 +599,7 @@ static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask, case 13: /* dss2 */ mask = 0x1; break; case 25: /* usb */ - mask = 0xf; break; + mask = 0x7; break; } } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 6cab20b1d3c..6c78d471fab 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -33,20 +33,6 @@ static u32 omap2_clksel_get_divisor(struct clk *clk); #define RATE_IN_242X (1 << 0) #define RATE_IN_243X (1 << 1) -/* Memory timings */ -#define M_DDR 1 -#define M_LOCK_CTRL (1 << 2) -#define M_UNLOCK 0 -#define M_LOCK 1 - -struct memory_timings { - u32 m_type; /* ddr = 1, sdr = 0 */ - u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ - u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ - u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ - u32 base_cs; /* base chip select to use for calculations */ -}; - /* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM @@ -731,6 +717,16 @@ static struct clk sys_clkout2 = { .recalc = &omap2_clksel_recalc, }; +static struct clk emul_ck = { + .name = "emul_ck", + .parent = &func_54m_ck, + .flags = CLOCK_IN_OMAP242X, + .enable_reg = (void __iomem *)&PRCM_CLKEMUL_CTRL, + .enable_bit = 0, + .recalc = &omap2_propagate_rate, + +}; + /* * MPU clock domain * Clocks: @@ -1702,7 +1698,8 @@ static struct clk hdq_fck = { }; static struct clk i2c2_ick = { - .name = "i2c2_ick", + .name = "i2c_ick", + .id = 2, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1711,7 +1708,8 @@ static struct clk i2c2_ick = { }; static struct clk i2c2_fck = { - .name = "i2c2_fck", + .name = "i2c_fck", + .id = 2, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1729,7 +1727,8 @@ static struct clk i2chs2_fck = { }; static struct clk i2c1_ick = { - .name = "i2c1_ick", + .name = "i2c_ick", + .id = 1, .parent = &l4_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, @@ -1738,7 +1737,8 @@ static struct clk i2c1_ick = { }; static struct clk i2c1_fck = { - .name = "i2c1_fck", + .name = "i2c_fck", + .id = 1, .parent = &func_12m_ck, .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X, .enable_reg = (void __iomem *)&CM_FCLKEN1_CORE, @@ -1971,6 +1971,7 @@ static struct clk *onchip_clks[] = { &wdt1_osc_ck, &sys_clkout, &sys_clkout2, + &emul_ck, /* mpu domain clocks */ &mpu_ck, /* dsp domain clocks */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7181edb8935..def9e5370ed 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -74,6 +74,47 @@ static void omap_init_i2c(void) {} #endif +#if defined(CONFIG_OMAP_STI) + +#define OMAP2_STI_BASE IO_ADDRESS(0x48068000) +#define OMAP2_STI_CHANNEL_BASE 0x54000000 +#define OMAP2_STI_IRQ 4 + +static struct resource sti_resources[] = { + { + .start = OMAP2_STI_BASE, + .end = OMAP2_STI_BASE + 0x7ff, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP2_STI_CHANNEL_BASE, + .end = OMAP2_STI_CHANNEL_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP2_STI_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device sti_device = { + .name = "sti", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(sti_resources), + .resource = sti_resources, +}; + +static inline void omap_init_sti(void) +{ + platform_device_register(&sti_device); +} +#else +static inline void omap_init_sti(void) {} +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -82,6 +123,7 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_i2c(); + omap_init_sti(); return 0; } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 8ea67bf196a..7d5711611f2 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -16,9 +16,13 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <asm/mach/map.h> +#include <asm/tlb.h> #include <asm/io.h> + +#include <asm/mach/map.h> + #include <asm/arch/mux.h> +#include <asm/arch/omapfb.h> extern void omap_sram_init(void); extern int omap2_clk_init(void); @@ -43,11 +47,24 @@ static struct map_desc omap2_io_desc[] __initdata = { } }; -void __init omap_map_common_io(void) +void __init omap2_map_common_io(void) { iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); + + /* Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + omap2_check_revision(); omap_sram_init(); + omapfb_reserve_mem(); +} + +void __init omap2_init_common_hw(void) +{ omap2_mux_init(); omap2_clk_init(); } diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c new file mode 100644 index 00000000000..1d925d69fc3 --- /dev/null +++ b/arch/arm/mach-omap2/memory.c @@ -0,0 +1,102 @@ +/* + * linux/arch/arm/mach-omap2/memory.c + * + * Memory timing related functions for OMAP24XX + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Copyright (C) 2005 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> + +#include <asm/io.h> + +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> + +#include "prcm-regs.h" +#include "memory.h" + +static struct memory_timings mem_timings; + +u32 omap2_memory_get_slow_dll_ctrl(void) +{ + return mem_timings.slow_dll_ctrl; +} + +u32 omap2_memory_get_fast_dll_ctrl(void) +{ + return mem_timings.fast_dll_ctrl; +} + +u32 omap2_memory_get_type(void) +{ + return mem_timings.m_type; +} + +void omap2_init_memory_params(u32 force_lock_to_unlock_mode) +{ + unsigned long dll_cnt; + u32 fast_dll = 0; + + mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */ + + /* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others. + * In the case of 2422, its ok to use CS1 instead of CS0. + */ + if (cpu_is_omap2422()) + mem_timings.base_cs = 1; + else + mem_timings.base_cs = 0; + + if (mem_timings.m_type != M_DDR) + return; + + /* With DDR we need to determine the low frequency DLL value */ + if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL)) + mem_timings.dll_mode = M_UNLOCK; + else + mem_timings.dll_mode = M_LOCK; + + if (mem_timings.base_cs == 0) { + fast_dll = SDRC_DLLA_CTRL; + dll_cnt = SDRC_DLLA_STATUS & 0xff00; + } else { + fast_dll = SDRC_DLLB_CTRL; + dll_cnt = SDRC_DLLB_STATUS & 0xff00; + } + if (force_lock_to_unlock_mode) { + fast_dll &= ~0xff00; + fast_dll |= dll_cnt; /* Current lock mode */ + } + /* set fast timings with DLL filter disabled */ + mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8)); + + /* No disruptions, DDR will be offline & C-ABI not followed */ + omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl, + mem_timings.fast_dll_ctrl, + mem_timings.base_cs, + force_lock_to_unlock_mode); + mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */ + + /* Turn status into unlock ctrl */ + mem_timings.slow_dll_ctrl |= + ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); + + /* 90 degree phase for anything below 133Mhz + disable DLL filter */ + mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); +} diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h new file mode 100644 index 00000000000..d212eea83a0 --- /dev/null +++ b/arch/arm/mach-omap2/memory.h @@ -0,0 +1,34 @@ +/* + * linux/arch/arm/mach-omap2/memory.h + * + * Interface for memory timing related functions for OMAP24XX + * + * Copyright (C) 2005 Texas Instruments Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Copyright (C) 2005 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* Memory timings */ +#define M_DDR 1 +#define M_LOCK_CTRL (1 << 2) +#define M_UNLOCK 0 +#define M_LOCK 1 + +struct memory_timings { + u32 m_type; /* ddr = 1, sdr = 0 */ + u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */ + u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */ + u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */ + u32 base_cs; /* base chip select to use for calculations */ +}; + +extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode); +extern u32 omap2_memory_get_slow_dll_ctrl(void); +extern u32 omap2_memory_get_fast_dll_ctrl(void); +extern u32 omap2_memory_get_type(void); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index ea4654815dd..1197dc38c20 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -50,9 +50,54 @@ MUX_CFG_24XX("H19_24XX_I2C2_SDA", 0x114, 0, 0, 0, 1) /* Menelaus interrupt */ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) +/* 24xx clocks */ +MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1) + +/* 24xx McBSP */ +MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX", 0x124, 1, 1, 0, 1) +MUX_CFG_24XX("R14_24XX_MCBSP2_FSX", 0x125, 1, 1, 0, 1) +MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1) +MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1) + /* 24xx GPIO */ +MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) +MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) +MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) +MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) +MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) +MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) +MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) +MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) +MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1) + +/* TSC IRQ */ +MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) + +/* UART3 */ +MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) +MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) + +/* Keypad GPIO*/ +MUX_CFG_24XX("T19_24XX_KBR0", 0x106, 3, 1, 1, 1) +MUX_CFG_24XX("R19_24XX_KBR1", 0x107, 3, 1, 1, 1) +MUX_CFG_24XX("V18_24XX_KBR2", 0x139, 3, 1, 1, 1) +MUX_CFG_24XX("M21_24XX_KBR3", 0xc9, 3, 1, 1, 1) +MUX_CFG_24XX("E5__24XX_KBR4", 0x138, 3, 1, 1, 1) +MUX_CFG_24XX("M18_24XX_KBR5", 0x10e, 3, 1, 1, 1) +MUX_CFG_24XX("R20_24XX_KBC0", 0x108, 3, 0, 0, 1) +MUX_CFG_24XX("M14_24XX_KBC1", 0x109, 3, 0, 0, 1) +MUX_CFG_24XX("H19_24XX_KBC2", 0x114, 3, 0, 0, 1) +MUX_CFG_24XX("V17_24XX_KBC3", 0x135, 3, 0, 0, 1) +MUX_CFG_24XX("P21_24XX_KBC4", 0xca, 3, 0, 0, 1) +MUX_CFG_24XX("L14_24XX_KBC5", 0x10f, 3, 0, 0, 1) +MUX_CFG_24XX("N19_24XX_KBC6", 0x110, 3, 0, 0, 1) + +/* 24xx Menelaus Keypad GPIO */ +MUX_CFG_24XX("B3__24XX_KBR5", 0x30, 3, 1, 1, 1) +MUX_CFG_24XX("AA4_24XX_KBC2", 0xe7, 3, 0, 0, 1) +MUX_CFG_24XX("B13_24XX_KBC6", 0x110, 3, 0, 0, 1) }; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c new file mode 100644 index 00000000000..562168fa2b1 --- /dev/null +++ b/arch/arm/mach-omap2/pm.c @@ -0,0 +1,149 @@ +/* + * linux/arch/arm/mach-omap2/pm.c + * + * OMAP2 Power Management Routines + * + * Copyright (C) 2006 Nokia Corporation + * Tony Lindgren <tony@atomide.com> + * + * Copyright (C) 2005 Texas Instruments, Inc. + * Richard Woodruff <r-woodruff2@ti.com> + * + * Based on pm.c for omap1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/pm.h> +#include <linux/interrupt.h> +#include <linux/sysfs.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/atomic.h> +#include <asm/mach/time.h> +#include <asm/mach/irq.h> +#include <asm/mach-types.h> + +#include <asm/arch/irqs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sram.h> +#include <asm/arch/pm.h> + +static struct clk *vclk; +static void (*omap2_sram_idle)(void); +static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev); +static void (*saved_idle)(void); + +void omap2_pm_idle(void) +{ + local_irq_disable(); + local_fiq_disable(); + if (need_resched()) { + local_fiq_enable(); + local_irq_enable(); + return; + } + + /* + * Since an interrupt may set up a timer, we don't want to + * reprogram the hardware timer with interrupts enabled. + * Re-enable interrupts only after returning from idle. + */ + timer_dyn_reprogram(); + + omap2_sram_idle(); + local_fiq_enable(); + local_irq_enable(); +} + +static int omap2_pm_prepare(suspend_state_t state) +{ + int error = 0; + + /* We cannot sleep in idle until we have resumed */ + saved_idle = pm_idle; + pm_idle = NULL; + + switch (state) + { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + break; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return error; +} + +static int omap2_pm_enter(suspend_state_t state) +{ + switch (state) + { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + /* FIXME: Add suspend */ + break; + + case PM_SUSPEND_DISK: + return -ENOTSUPP; + + default: + return -EINVAL; + } + + return 0; +} + +static int omap2_pm_finish(suspend_state_t state) +{ + pm_idle = saved_idle; + return 0; +} + +static struct pm_ops omap_pm_ops = { + .pm_disk_mode = 0, + .prepare = omap2_pm_prepare, + .enter = omap2_pm_enter, + .finish = omap2_pm_finish, +}; + +int __init omap2_pm_init(void) +{ + printk("Power Management for TI OMAP.\n"); + + vclk = clk_get(NULL, "virt_prcm_set"); + if (IS_ERR(vclk)) { + printk(KERN_ERR "Could not get PM vclk\n"); + return -ENODEV; + } + + /* + * We copy the assembler sleep/wakeup routines to SRAM. + * These routines need to be in SRAM as that's the only + * memory the MPU can see when it wakes up. + */ + omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend, + omap24xx_idle_loop_suspend_sz); + + omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend, + omap24xx_cpu_suspend_sz); + + pm_set_ops(&omap_pm_ops); + pm_idle = omap2_pm_idle; + + return 0; +} + +__initcall(omap2_pm_init); diff --git a/arch/arm/mach-omap2/prcm.h b/arch/arm/mach-omap2/prcm-regs.h index 2eb89b936c8..22ac7be4f78 100644 --- a/arch/arm/mach-omap2/prcm.h +++ b/arch/arm/mach-omap2/prcm-regs.h @@ -1,5 +1,7 @@ /* - * prcm.h - Access definations for use in OMAP24XX clock and power management + * linux/arch/arm/mach-omap2/prcm-reg.h + * + * OMAP24XX Power Reset and Clock Management (PRCM) registers * * Copyright (C) 2005 Texas Instruments, Inc. * @@ -18,8 +20,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __ASM_ARM_ARCH_DPM_PRCM_H -#define __ASM_ARM_ARCH_DPM_PRCM_H +#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H +#define __ARCH_ARM_MACH_OMAP2_PRCM_H /* SET_PERFORMANCE_LEVEL PARAMETERS */ #define PRCM_HALF_SPEED 1 @@ -159,54 +161,63 @@ #define CM_FCLKEN_MDM PRCM_REG32(0xC00) #define CM_ICLKEN_MDM PRCM_REG32(0xC10) #define CM_IDLEST_MDM PRCM_REG32(0xC20) +#define CM_AUTOIDLE_MDM PRCM_REG32(0xC30) #define CM_CLKSEL_MDM PRCM_REG32(0xC40) - -/* FIXME: Move to header for 2430 */ -#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000) +#define CM_CLKSTCTRL_MDM PRCM_REG32(0xC48) +#define RM_RSTCTRL_MDM PRCM_REG32(0xC50) +#define RM_RSTST_MDM PRCM_REG32(0xC58) +#define PM_WKEN_MDM PRCM_REG32(0xCA0) +#define PM_WKST_MDM PRCM_REG32(0xCB0) +#define PM_WKDEP_MDM PRCM_REG32(0xCC8) +#define PM_PWSTCTRL_MDM PRCM_REG32(0xCE0) +#define PM_PWSTST_MDM PRCM_REG32(0xCE4) + +#define OMAP24XX_L4_IO_BASE 0x48000000 + +#define DISP_BASE (OMAP24XX_L4_IO_BASE + 0x50000) #define DISP_REG32(offset) __REG32(DISP_BASE + (offset)) -#define GPMC_BASE (OMAP24XX_GPMC_BASE) -#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset)) +#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000) +#define GPMC_REG32(offset) __REG32(OMAP24XX_GPMC_BASE + (offset)) -#define GPT1_BASE (OMAP24XX_GPT1) +/* FIXME: Move these to timer code */ +#define GPT1_BASE (0x48028000) #define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset)) /* Misc sysconfig */ #define DISPC_SYSCONFIG DISP_REG32(0x410) -#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000) +#define SPI_BASE (OMAP24XX_L4_IO_BASE + 0x98000) #define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10) -#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10) - -//#define DSP_MMU_SYSCONFIG 0x5A000010 -#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10) -//#define IVA_MMU_SYSCONFIG 0x5D000010 -//#define DSP_DMA_SYSCONFIG 0x00FCC02C -#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C) -#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C) +#define MCSPI2_SYSCONFIG __REG32(SPI_BASE + 0x2000 + 0x10) +#define MCSPI3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0xb8010) + +#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE + 0x2C10) +#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE + 0x282C) +#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE + 0x602C) #define GPMC_SYSCONFIG GPMC_REG32(0x010) -#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010) -#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054) -#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054) -#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054) -//#define IVA_SYSCONFIG 0x5C060010 -#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10) -#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10) -#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010) -//#define VLYNQ_SYSCONFIG 0x67FFFE10 +#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x94010) +#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6A054) +#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6C054) +#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6E054) +#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE + 0x10) +#define OMAP24XX_SMS_BASE (L3_24XX_BASE + 0x8000) +#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE + 0x10) +#define SSI_SYSCONFIG __REG32(DISP_BASE + 0x8010) /* rkw - good cannidates for PM_ to start what nm was trying */ -#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) -#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) -#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) -#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) -#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) -#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) -#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) -#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) -#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) -#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) -#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) - +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE + 0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE + 0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE + 0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE + 0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE + 0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE + 0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE + 0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE + 0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE + 0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE + 0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE + 0x8A000) + +/* FIXME: Move these to timer code */ #define GPTIMER1_SYSCONFIG GPT1_REG32(0x010) #define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10) #define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10) @@ -220,12 +231,18 @@ #define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10) #define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10) -#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1))) +/* FIXME: Move these to gpio code */ +#define OMAP24XX_GPIO_BASE 0x48018000 +#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1))) + +#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1) + 0x10)) +#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2) + 0x10)) +#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3) + 0x10)) +#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4) + 0x10)) -#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10)) -#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10)) -#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10)) -#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10)) +#if defined(CONFIG_ARCH_OMAP243X) +#define GPIO5_SYSCONFIG __REG32((OMAP24XX_GPIO5_BASE + 0x10)) +#endif /* GP TIMER 1 */ #define GPTIMER1_TISTAT GPT1_REG32(0x014) @@ -243,15 +260,15 @@ #define GPTIMER1_TCAR2 GPT1_REG32(0x044) /* rkw -- base fix up please... */ -#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018) +#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE + 0x78018) /* SDRC */ -#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060) -#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064) -#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068) -#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C) -#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070) -#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084) +#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x060) +#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x064) +#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x068) +#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x06C) +#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE + 0x070) +#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE + 0x084) /* GPIO 1 */ #define GPIO1_BASE GPIOX_BASE(1) @@ -278,6 +295,8 @@ #define GPIO2_DATAIN GPIO2_REG32(0x038) #define GPIO2_OE GPIO2_REG32(0x034) #define GPIO2_DATAOUT GPIO2_REG32(0x03C) +#define GPIO2_DEBOUNCENABLE GPIO2_REG32(0x050) +#define GPIO2_DEBOUNCINGTIME GPIO2_REG32(0x054) /* GPIO 3 */ #define GPIO3_BASE GPIOX_BASE(3) @@ -294,6 +313,8 @@ #define GPIO3_DATAOUT GPIO3_REG32(0x03C) #define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) #define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) +#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050) +#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054) /* GPIO 4 */ #define GPIO4_BASE GPIOX_BASE(4) @@ -311,10 +332,26 @@ #define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050) #define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054) +#if defined(CONFIG_ARCH_OMAP243X) +/* GPIO 5 */ +#define GPIO5_REG32(offset) __REG32((OMAP24XX_GPIO5_BASE + (offset))) +#define GPIO5_IRQENABLE1 GPIO5_REG32(0x01C) +#define GPIO5_IRQSTATUS1 GPIO5_REG32(0x018) +#define GPIO5_IRQENABLE2 GPIO5_REG32(0x02C) +#define GPIO5_IRQSTATUS2 GPIO5_REG32(0x028) +#define GPIO5_WAKEUPENABLE GPIO5_REG32(0x020) +#define GPIO5_RISINGDETECT GPIO5_REG32(0x048) +#define GPIO5_FALLINGDETECT GPIO5_REG32(0x04C) +#define GPIO5_DATAIN GPIO5_REG32(0x038) +#define GPIO5_OE GPIO5_REG32(0x034) +#define GPIO5_DATAOUT GPIO5_REG32(0x03C) +#define GPIO5_DEBOUNCENABLE GPIO5_REG32(0x050) +#define GPIO5_DEBOUNCINGTIME GPIO5_REG32(0x054) +#endif /* IO CONFIG */ -#define CONTROL_BASE (OMAP24XX_CTRL_BASE) -#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset)) +#define OMAP24XX_CTRL_BASE (L4_24XX_BASE) +#define CONTROL_REG32(offset) __REG32(OMAP24XX_CTRL_BASE + (offset)) #define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104) #define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134) @@ -322,15 +359,18 @@ #define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C) #define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090) #define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8) -#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) +#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) /* 2420 */ #define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0) #define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC) +#define CONTROL_PADCONF_SYS_NIRQW0 CONTROL_REG32(0x0BC) /* 2430 */ +#define CONTROL_PADCONF_SSI1_FLAG_TX CONTROL_REG32(0x108) /* 2430 */ /* CONTROL */ #define CONTROL_DEVCONF CONTROL_REG32(0x274) +#define CONTROL_DEVCONF1 CONTROL_REG32(0x2E8) /* INTERRUPT CONTROLLER */ -#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000) +#define INTC_BASE ((L4_24XX_BASE) + 0xfe000) #define INTC_REG32(offset) __REG32(INTC_BASE + (offset)) #define INTC1_U_BASE INTC_REG32(0x000) @@ -348,10 +388,12 @@ #define INTC_ISR_CLEAR2 INTC_REG32(0x0D4) #define INTC_SIR_IRQ INTC_REG32(0x040) #define INTC_CONTROL INTC_REG32(0x048) -#define INTC_ILR11 INTC_REG32(0x12C) +#define INTC_ILR11 INTC_REG32(0x12C) /* PRCM on MPU PIC */ +#define INTC_ILR30 INTC_REG32(0x178) +#define INTC_ILR31 INTC_REG32(0x17C) #define INTC_ILR32 INTC_REG32(0x180) -#define INTC_ILR37 INTC_REG32(0x194) -#define INTC_SYSCONFIG INTC_REG32(0x010) +#define INTC_ILR37 INTC_REG32(0x194) /* GPIO4 on MPU PIC */ +#define INTC_SYSCONFIG INTC_REG32(0x010) /* GPT1 on MPU PIC */ /* RAM FIREWALL */ #define RAMFW_BASE (0x68005000) @@ -373,6 +415,24 @@ #define GPMC_CONFIG6_0 GPMC_REG32(0x074) #define GPMC_CONFIG7_0 GPMC_REG32(0x078) +/* GPMC CS1 */ +#define GPMC_CONFIG1_1 GPMC_REG32(0x090) +#define GPMC_CONFIG2_1 GPMC_REG32(0x094) +#define GPMC_CONFIG3_1 GPMC_REG32(0x098) +#define GPMC_CONFIG4_1 GPMC_REG32(0x09C) +#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0) +#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4) +#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8) + +/* GPMC CS3 */ +#define GPMC_CONFIG1_3 GPMC_REG32(0x0F0) +#define GPMC_CONFIG2_3 GPMC_REG32(0x0F4) +#define GPMC_CONFIG3_3 GPMC_REG32(0x0F8) +#define GPMC_CONFIG4_3 GPMC_REG32(0x0FC) +#define GPMC_CONFIG5_3 GPMC_REG32(0x100) +#define GPMC_CONFIG6_3 GPMC_REG32(0x104) +#define GPMC_CONFIG7_3 GPMC_REG32(0x108) + /* DSS */ #define DSS_CONTROL DISP_REG32(0x040) #define DISPC_CONTROL DISP_REG32(0x440) @@ -405,11 +465,15 @@ #define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8) #define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC) -/* Wake up define for board */ -#define GPIO97 (1 << 1) -#define GPIO88 (1 << 24) +/* HSUSB Suspend */ +#define HSUSB_CTRL __REG8(0x480AC001) +#define USBOTG_POWER __REG32(0x480AC000) + +/* HS MMC */ +#define MMCHS1_SYSCONFIG __REG32(0x4809C010) +#define MMCHS2_SYSCONFIG __REG32(0x480b4010) -#endif /* __ASSEMBLER__ */ +#endif /* __ASSEMBLER__ */ #endif diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c new file mode 100644 index 00000000000..8893479dc7e --- /dev/null +++ b/arch/arm/mach-omap2/prcm.c @@ -0,0 +1,40 @@ +/* + * linux/arch/arm/mach-omap2/prcm.c + * + * OMAP 24xx Power Reset and Clock Management (PRCM) functions + * + * Copyright (C) 2005 Nokia Corporation + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include "prcm-regs.h" + +u32 omap_prcm_get_reset_sources(void) +{ + return RM_RSTST_WKUP & 0x7f; +} +EXPORT_SYMBOL(omap_prcm_get_reset_sources); + +/* Resets clock rates and reboots the system. Only called from system.h */ +void omap_prcm_arch_reset(char mode) +{ + u32 rate; + struct clk *vclk, *sclk; + + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */ + RM_RSTCTRL_WKUP |= 2; +} diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S new file mode 100644 index 00000000000..00299cbeb91 --- /dev/null +++ b/arch/arm/mach-omap2/sleep.S @@ -0,0 +1,144 @@ +/* + * linux/arch/arm/mach-omap2/sleep.S + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/arch/io.h> +#include <asm/arch/pm.h> + +#define A_32KSYNC_CR_V IO_ADDRESS(OMAP_TIMER32K_BASE+0x10) +#define A_PRCM_VOLTCTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50) +#define A_PRCM_CLKCFG_CTRL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80) +#define A_CM_CLKEN_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500) +#define A_CM_IDLEST_CKGEN_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520) +#define A_CM_CLKSEL1_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540) +#define A_CM_CLKSEL2_PLL_V IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544) + +#define A_SDRC_DLLA_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60) +#define A_SDRC_POWER_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70) +#define A_SDRC_RFR_CTRL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4) +#define A_SDRC0_V (0xC0000000) +#define A_SDRC_MANUAL_V IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8) + + .text + +/* + * Forces OMAP into idle state + * + * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI + * for normal idles. + * + * Note: This code get's copied to internal SRAM at boot. When the OMAP + * wakes up it continues execution at the point it went to sleep. + */ +ENTRY(omap24xx_idle_loop_suspend) + stmfd sp!, {r0, lr} @ save registers on stack + mov r0, #0 @ clear for mcr setup + mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt + ldmfd sp!, {r0, pc} @ restore regs and return + +ENTRY(omap24xx_idle_loop_suspend_sz) + .word . - omap24xx_idle_loop_suspend + +/* + * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing + * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore + * SDRC. + * + * Input: + * R0 : DLL ctrl value pre-Sleep + * R1 : Processor+Revision + * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2 + * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2 + * + * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on + * when we get called, but the DLL probably isn't. We will wait a bit more in + * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even + * if in unlocked mode. + * + * For less than 242x-ES2.2 upon wake from a sleep mode where the external + * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz + * clock can pass into the PRCM can cause problems at DSP and IVA. + * To work around this the code will switch to the 32kHz source prior to sleep. + * Post sleep we will shift back to using the DPLL. Apparently, + * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait + * 3x12MHz + 3x32kHz clocks for a full switch. + * + * The DLL load value is not kept in RETENTION or OFF. It needs to be restored + * at wake + */ +ENTRY(omap24xx_cpu_suspend) + stmfd sp!, {r0 - r12, lr} @ save registers on stack + mov r3, #0x0 @ clear for mrc call + mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished + nop + nop + ldr r3, A_SDRC_POWER @ addr of sdrc power + ldr r4, [r3] @ value of sdrc power + orr r4, r4, #0x40 @ enable self refresh on idle req + mov r5, #0x2000 @ set delay (DPLL relock + DLL relock) + str r4, [r3] @ make it so + mov r2, #0 + nop + mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt + nop +loop: + subs r5, r5, #0x1 @ awake, wait just a bit + bne loop + + /* The DPLL has on before we take the DDR out of self refresh */ + bic r4, r4, #0x40 @ now clear self refresh bit. + str r4, [r3] @ put vlaue back. + ldr r4, A_SDRC0 @ make a clock happen + ldr r4, [r4] + nop @ start auto refresh only after clk ok + movs r0, r0 @ see if DDR or SDR + ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl + strne r0, [r1] @ rewrite DLLA to force DLL reload + addne r1, r1, #0x8 @ move to DLLB + strne r0, [r1] @ rewrite DLLB to force DLL reload + + mov r5, #0x1000 +loop2: + subs r5, r5, #0x1 + bne loop2 + /* resume*/ + ldmfd sp!, {r0 - r12, pc} @ restore regs and return + +A_SDRC_POWER: + .word A_SDRC_POWER_V +A_SDRC0: + .word A_SDRC0_V +A_CM_CLKSEL2_PLL_S: + .word A_CM_CLKSEL2_PLL_V +A_CM_CLKEN_PLL: + .word A_CM_CLKEN_PLL_V +A_SDRC_DLLA_CTRL_S: + .word A_SDRC_DLLA_CTRL_V +A_SDRC_MANUAL_S: + .word A_SDRC_MANUAL_V + +ENTRY(omap24xx_cpu_suspend_sz) + .word . - omap24xx_cpu_suspend + diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S index 2a869e20334..d261e4ff4d9 100644 --- a/arch/arm/mach-omap2/sram-fn.S +++ b/arch/arm/mach-omap2/sram-fn.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap1/sram.S + * linux/arch/arm/mach-omap2/sram.S * * Omap2 specific functions that need to be run in internal SRAM * @@ -28,7 +28,7 @@ #include <asm/arch/io.h> #include <asm/hardware.h> -#include <asm/arch/prcm.h> +#include "prcm-regs.h" #define TIMER_32KSYNCT_CR_V IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010) diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index b45560a8f6c..a042473deed 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -307,6 +307,10 @@ static void __init fixup_poodle(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { sharpsl_save_param(); + mi->nr_banks=1; + mi->bank[0].start = 0xa0000000; + mi->bank[0].node = 0; + mi->bank[0].size = (32*1024*1024); } MACHINE_START(POODLE, "SHARP Poodle") diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index ed07c4149d8..ce7d8100069 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -50,9 +50,15 @@ config MACH_N30 <http://zoo.weinigel.se/n30>. +config MACH_SMDK + bool + help + Common machine code for SMDK2410 and SMDK2440 + config ARCH_SMDK2410 bool "SMDK2410/A9M2410" select CPU_S3C2410 + select MACH_SMDK help Say Y here if you are using the SMDK2410 or the derived module A9M2410 <http://www.fsforth.de> @@ -60,6 +66,7 @@ config ARCH_SMDK2410 config ARCH_S3C2440 bool "SMDK2440" select CPU_S3C2440 + select MACH_SMDK help Say Y here if you are using the SMDK2440. diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 1b3b476e563..3e5712db6b5 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -48,3 +48,5 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_MACH_OTOM) += mach-otom.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o + +obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c index fec02c92f95..b7f85e6d6b7 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/mach-s3c2410/clock.c @@ -249,7 +249,7 @@ static int s3c24xx_upll_enable(struct clk *clk, int enable) /* if we started the UPLL, then allow to settle */ - if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF)) + if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) udelay(200); return 0; diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/mach-s3c2410/common-smdk.c new file mode 100644 index 00000000000..36b8291b5e0 --- /dev/null +++ b/arch/arm/mach-s3c2410/common-smdk.c @@ -0,0 +1,134 @@ +/* linux/arch/arm/mach-s3c2410/common-smdk.c + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Common code for SMDK2410 and SMDK2440 boards + * + * http://www.fluff.org/ben/smdk2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> + +#include <asm/arch/regs-gpio.h> + +#include <asm/arch/nand.h> + +#include "devs.h" +#include "pm.h" + +/* NAND parititon from 2.4.18-swl5 */ + +static struct mtd_partition smdk_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_16K, + .offset = 0, + }, + [1] = { + .name = "S3C2410 flash parition 1", + .offset = 0, + .size = SZ_2M, + }, + [2] = { + .name = "S3C2410 flash partition 2", + .offset = SZ_4M, + .size = SZ_4M, + }, + [3] = { + .name = "S3C2410 flash partition 3", + .offset = SZ_8M, + .size = SZ_2M, + }, + [4] = { + .name = "S3C2410 flash partition 4", + .offset = SZ_1M * 10, + .size = SZ_4M, + }, + [5] = { + .name = "S3C2410 flash partition 5", + .offset = SZ_1M * 14, + .size = SZ_1M * 10, + }, + [6] = { + .name = "S3C2410 flash partition 6", + .offset = SZ_1M * 24, + .size = SZ_1M * 24, + }, + [7] = { + .name = "S3C2410 flash partition 7", + .offset = SZ_1M * 48, + .size = SZ_16M, + } +}; + +static struct s3c2410_nand_set smdk_nand_sets[] = { + [0] = { + .name = "NAND", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(smdk_default_nand_part), + .partitions = smdk_default_nand_part, + }, +}; + +/* choose a set of timings which should suit most 512Mbit + * chips and beyond. +*/ + +static struct s3c2410_platform_nand smdk_nand_info = { + .tacls = 20, + .twrph0 = 60, + .twrph1 = 20, + .nr_sets = ARRAY_SIZE(smdk_nand_sets), + .sets = smdk_nand_sets, +}; + +/* devices we initialise */ + +static struct platform_device __initdata *smdk_devs[] = { + &s3c_device_nand, +}; + +void __init smdk_machine_init(void) +{ + /* Configure the LEDs (even if we have no LED support)*/ + + s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP); + s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP); + + s3c2410_gpio_setpin(S3C2410_GPF4, 1); + s3c2410_gpio_setpin(S3C2410_GPF5, 1); + s3c2410_gpio_setpin(S3C2410_GPF6, 1); + s3c2410_gpio_setpin(S3C2410_GPF7, 1); + + s3c_device_nand.dev.platform_data = &smdk_nand_info; + + platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); + + s3c2410_pm_init(); +} diff --git a/arch/arm/mach-s3c2410/common-smdk.h b/arch/arm/mach-s3c2410/common-smdk.h new file mode 100644 index 00000000000..0e3a3be330a --- /dev/null +++ b/arch/arm/mach-s3c2410/common-smdk.h @@ -0,0 +1,15 @@ +/* linux/arch/arm/mach-s3c2410/common-smdk.h + * + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Common code for SMDK2410 and SMDK2440 boards + * + * http://www.fluff.org/ben/smdk2440/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void smdk_machine_init(void); diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 3e327b8e46b..cc97fbf6629 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -232,8 +232,8 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) static struct s3c2410_platform_nand anubis_nand_info = { .tacls = 25, - .twrph0 = 80, - .twrph1 = 80, + .twrph0 = 55, + .twrph1 = 40, .nr_sets = ARRAY_SIZE(anubis_nand_sets), .sets = anubis_nand_sets, .select_chip = anubis_nand_select, diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 0260ed5ab94..306afc1d7cd 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -32,6 +32,11 @@ #include <linux/serial_core.h> #include <linux/serial.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -46,6 +51,7 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-lcd.h> +#include <asm/arch/nand.h> #include <asm/arch/fb.h> #include "clock.h" @@ -170,12 +176,39 @@ static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = { }, }; +static struct mtd_partition rx3715_nand_part[] = { + [0] = { + .name = "Whole Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct s3c2410_nand_set rx3715_nand_sets[] = { + [0] = { + .name = "Internal", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(rx3715_nand_part), + .partitions = rx3715_nand_part, + }, +}; + +static struct s3c2410_platform_nand rx3715_nand_info = { + .tacls = 25, + .twrph0 = 50, + .twrph1 = 15, + .nr_sets = ARRAY_SIZE(rx3715_nand_sets), + .sets = rx3715_nand_sets, +}; + static struct platform_device *rx3715_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_nand, }; static struct s3c24xx_board rx3715_board __initdata = { @@ -185,6 +218,8 @@ static struct s3c24xx_board rx3715_board __initdata = { static void __init rx3715_map_io(void) { + s3c_device_nand.dev.platform_data = &rx3715_nand_info; + s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 1e76e1fdfce..2db932d72c5 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -28,7 +28,8 @@ * Ben Dooks <ben@simtec.co.uk> * * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA - * 20-Sep-2005 BJD Added static to non-exported items + * 20-Sep-2005 BJD Added static to non-exported items + * 01-Apr-2006 BJD Moved init code to common smdk * ***********************************************************************/ @@ -54,6 +55,8 @@ #include "devs.h" #include "cpu.h" +#include "common-smdk.h" + static struct map_desc smdk2410_iodesc[] __initdata = { /* nothing here yet */ }; @@ -107,11 +110,6 @@ static void __init smdk2410_map_io(void) s3c24xx_set_board(&smdk2410_board); } -static void __init smdk2410_init_irq(void) -{ - s3c24xx_init_irq(); -} - MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ /* Maintainer: Jonas Dietsche */ @@ -119,7 +117,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = smdk2410_map_io, - .init_irq = smdk2410_init_irq, + .init_irq = s3c24xx_init_irq, + .init_machine = smdk_machine_init, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index f4315721c3b..5fffd1d5104 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -53,7 +53,8 @@ #include "clock.h" #include "devs.h" #include "cpu.h" -#include "pm.h" + +#include "common-smdk.h" static struct map_desc smdk2440_iodesc[] __initdata = { /* ISA IO Space map (memory space selected by A24) */ @@ -197,21 +198,9 @@ static void __init smdk2440_map_io(void) static void __init smdk2440_machine_init(void) { - /* Configure the LEDs (even if we have no LED support)*/ - - s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP); - s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP); - - s3c2410_gpio_setpin(S3C2410_GPF4, 0); - s3c2410_gpio_setpin(S3C2410_GPF5, 0); - s3c2410_gpio_setpin(S3C2410_GPF6, 0); - s3c2410_gpio_setpin(S3C2410_GPF7, 0); - s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg); - s3c2410_pm_init(); + smdk_machine_init(); } MACHINE_START(S3C2440, "SMDK2440") diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 10245408247..676b5c5b75b 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -11,7 +11,8 @@ * published by the Free Software Foundation. * * ChangeLog: - * 03-06-2004 John Lenz <jelenz@wisc.edu> + * 2006 Pavel Machek <pavel@suse.cz> + * 03-06-2004 John Lenz <lenz@cs.wisc.edu> * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net> * 04-16-2001 Lineo Japan,Inc. ... */ @@ -87,12 +88,75 @@ static struct mcp_plat_data collie_mcp_data = { .sclk_rate = 11981000, }; +#ifdef CONFIG_SHARP_LOCOMO +/* + * low-level UART features. + */ +static struct locomo_dev *uart_dev = NULL; + +static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl) +{ + if (!uart_dev) return; + + if (mctrl & TIOCM_RTS) + locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0); + else + locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1); + + if (mctrl & TIOCM_DTR) + locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0); + else + locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1); +} + +static u_int collie_uart_get_mctrl(struct uart_port *port) +{ + int ret = TIOCM_CD; + unsigned int r; + if (!uart_dev) return ret; + + r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR); + if (r & LOCOMO_GPIO_CTS) + ret |= TIOCM_CTS; + if (r & LOCOMO_GPIO_DSR) + ret |= TIOCM_DSR; + + return ret; +} static struct sa1100_port_fns collie_port_fns __initdata = { .set_mctrl = collie_uart_set_mctrl, .get_mctrl = collie_uart_get_mctrl, }; +static int collie_uart_probe(struct locomo_dev *dev) +{ + uart_dev = dev; + return 0; +} + +static int collie_uart_remove(struct locomo_dev *dev) +{ + uart_dev = NULL; + return 0; +} + +static struct locomo_driver collie_uart_driver = { + .drv = { + .name = "collie_uart", + }, + .devid = LOCOMO_DEVID_UART, + .probe = collie_uart_probe, + .remove = collie_uart_remove, +}; + +static int __init collie_uart_init(void) { + return locomo_driver_register(&collie_uart_driver); +} +device_initcall(collie_uart_init); + +#endif + static struct resource locomo_resources[] = { [0] = { @@ -218,6 +282,12 @@ static void __init collie_map_io(void) { sa1100_map_io(); iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc)); + +#ifdef CONFIG_SHARP_LOCOMO + sa1100_register_uart_fns(&collie_port_fns); +#endif + sa1100_register_uart(0, 3); + sa1100_register_uart(1, 1); } MACHINE_START(COLLIE, "Sharp-Collie") diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c index 8a1bfcd5008..50e6b6bfb2e 100644 --- a/arch/arm/mm/consistent.c +++ b/arch/arm/mm/consistent.c @@ -18,6 +18,7 @@ #include <linux/device.h> #include <linux/dma-mapping.h> +#include <asm/memory.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/sizes.h> @@ -272,6 +273,17 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { + if (arch_is_coherent()) { + void *virt; + + virt = kmalloc(size, gfp); + if (!virt) + return NULL; + *handle = virt_to_dma(dev, virt); + + return virt; + } + return __dma_alloc(dev, size, handle, gfp, pgprot_noncached(pgprot_kernel)); } @@ -350,6 +362,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr WARN_ON(irqs_disabled()); + if (arch_is_coherent()) { + kfree(cpu_addr); + return; + } + size = PAGE_ALIGN(size); spin_lock_irqsave(&consistent_lock, flags); diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 5e5d05bcad5..f14b2d0f369 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -389,6 +389,17 @@ void __init build_mem_type_table(void) kern_pgprot = user_pgprot = cp->pte; /* + * Enable CPU-specific coherency if supported. + * (Only available on XSC3 at the moment.) + */ + if (arch_is_coherent()) { + if (cpu_is_xsc3()) { + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_COHERENT; + } + } + + /* * ARMv6 and above have extended page tables. */ if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) { diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index b9dfce57c27..80873b36c3f 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -371,7 +371,7 @@ ENTRY(cpu_xsc3_switch_mm) ENTRY(cpu_xsc3_set_pte) str r1, [r0], #-2048 @ linux version - bic r2, r1, #0xff0 + bic r2, r1, #0xdf0 @ Keep C, B, coherency bits orr r2, r2, #PTE_TYPE_EXT @ extended page eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 0887bb2a255..ec49495e651 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -70,13 +70,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP-16xx. + currently only available for OMAP16XX and 24XX. endchoice diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9ccf1943fc9..2896b454641 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,16 +3,16 @@ # # Common support -obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o +obj-y := common.o sram.o sram-fn.o clock.o devices.o dma.o mux.o gpio.o mcbsp.o usb.o fb.o obj-m := obj-n := obj- := +obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o + # OCPI interconnect support for 1710, 1610 and 5912 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o -# Power Management -obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 3c2bfc0efda..06485c193ee 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include <linux/string.h> #include <linux/clk.h> #include <linux/mutex.h> +#include <linux/platform_device.h> #include <asm/io.h> #include <asm/semaphore.h> @@ -37,17 +38,37 @@ static struct clk_functions *arch_clock; * Standard clock functions defined in include/linux/clk.h *-------------------------------------------------------------------------*/ +/* + * Returns a clock. Note that we first try to use device id on the bus + * and clock name. If this fails, we try to use clock name only. + */ struct clk * clk_get(struct device *dev, const char *id) { struct clk *p, *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; mutex_lock(&clocks_mutex); + + list_for_each_entry(p, &clocks, node) { + if (p->id == idno && + strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + list_for_each_entry(p, &clocks, node) { if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { clk = p; break; } } + mutex_unlock(&clocks_mutex); return clk; @@ -59,6 +80,9 @@ int clk_enable(struct clk *clk) unsigned long flags; int ret = 0; + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_enable) ret = arch_clock->clk_enable(clk); @@ -72,6 +96,9 @@ void clk_disable(struct clk *clk) { unsigned long flags; + if (clk == NULL || IS_ERR(clk)) + return; + spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_disable) arch_clock->clk_disable(clk); @@ -84,6 +111,9 @@ int clk_get_usecount(struct clk *clk) unsigned long flags; int ret = 0; + if (clk == NULL || IS_ERR(clk)) + return 0; + spin_lock_irqsave(&clockfw_lock, flags); ret = clk->usecount; spin_unlock_irqrestore(&clockfw_lock, flags); @@ -97,6 +127,9 @@ unsigned long clk_get_rate(struct clk *clk) unsigned long flags; unsigned long ret = 0; + if (clk == NULL || IS_ERR(clk)) + return 0; + spin_lock_irqsave(&clockfw_lock, flags); ret = clk->rate; spin_unlock_irqrestore(&clockfw_lock, flags); @@ -121,6 +154,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate) unsigned long flags; long ret = 0; + if (clk == NULL || IS_ERR(clk)) + return ret; + spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_round_rate) ret = arch_clock->clk_round_rate(clk, rate); @@ -133,7 +169,10 @@ EXPORT_SYMBOL(clk_round_rate); int clk_set_rate(struct clk *clk, unsigned long rate) { unsigned long flags; - int ret = 0; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk)) + return ret; spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_rate) @@ -147,7 +186,10 @@ EXPORT_SYMBOL(clk_set_rate); int clk_set_parent(struct clk *clk, struct clk *parent) { unsigned long flags; - int ret = 0; + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent)) + return ret; spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_set_parent) @@ -163,6 +205,9 @@ struct clk *clk_get_parent(struct clk *clk) unsigned long flags; struct clk * ret = NULL; + if (clk == NULL || IS_ERR(clk)) + return ret; + spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_get_parent) ret = arch_clock->clk_get_parent(clk); @@ -199,6 +244,9 @@ __setup("mpurate=", omap_clk_setup); /* Used for clocks that always have same value as the parent clock */ void followparent_recalc(struct clk *clk) { + if (clk == NULL || IS_ERR(clk)) + return; + clk->rate = clk->parent->rate; } @@ -207,6 +255,9 @@ void propagate_rate(struct clk * tclk) { struct clk *clkp; + if (tclk == NULL || IS_ERR(tclk)) + return; + list_for_each_entry(clkp, &clocks, node) { if (likely(clkp->parent != tclk)) continue; @@ -217,6 +268,9 @@ void propagate_rate(struct clk * tclk) int clk_register(struct clk *clk) { + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + mutex_lock(&clocks_mutex); list_add(&clk->node, &clocks); if (clk->init) @@ -229,6 +283,9 @@ EXPORT_SYMBOL(clk_register); void clk_unregister(struct clk *clk) { + if (clk == NULL || IS_ERR(clk)) + return; + mutex_lock(&clocks_mutex); list_del(&clk->node); mutex_unlock(&clocks_mutex); @@ -239,6 +296,9 @@ void clk_deny_idle(struct clk *clk) { unsigned long flags; + if (clk == NULL || IS_ERR(clk)) + return; + spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_deny_idle) arch_clock->clk_deny_idle(clk); @@ -250,6 +310,9 @@ void clk_allow_idle(struct clk *clk) { unsigned long flags; + if (clk == NULL || IS_ERR(clk)) + return; + spin_lock_irqsave(&clockfw_lock, flags); if (arch_clock->clk_allow_idle) arch_clock->clk_allow_idle(clk); diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 9dcce904b60..079b67deac0 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -24,6 +24,7 @@ #include <asm/arch/board.h> #include <asm/arch/mux.h> #include <asm/arch/gpio.h> +#include <asm/arch/menelaus.h> void omap_nop_release(struct device *dev) @@ -98,6 +99,62 @@ static inline void omap_init_i2c(void) {} #endif /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) + +static void omap_init_kp(void) +{ + if (machine_is_omap_h2() || machine_is_omap_h3()) { + omap_cfg_reg(F18_1610_KBC0); + omap_cfg_reg(D20_1610_KBC1); + omap_cfg_reg(D19_1610_KBC2); + omap_cfg_reg(E18_1610_KBC3); + omap_cfg_reg(C21_1610_KBC4); + + omap_cfg_reg(G18_1610_KBR0); + omap_cfg_reg(F19_1610_KBR1); + omap_cfg_reg(H14_1610_KBR2); + omap_cfg_reg(E20_1610_KBR3); + omap_cfg_reg(E19_1610_KBR4); + omap_cfg_reg(N19_1610_KBR5); + } else if (machine_is_omap_perseus2()) { + omap_cfg_reg(E2_730_KBR0); + omap_cfg_reg(J7_730_KBR1); + omap_cfg_reg(E1_730_KBR2); + omap_cfg_reg(F3_730_KBR3); + omap_cfg_reg(D2_730_KBR4); + + omap_cfg_reg(C2_730_KBC0); + omap_cfg_reg(D3_730_KBC1); + omap_cfg_reg(E4_730_KBC2); + omap_cfg_reg(F4_730_KBC3); + omap_cfg_reg(E3_730_KBC4); + } else if (machine_is_omap_h4()) { + omap_cfg_reg(T19_24XX_KBR0); + omap_cfg_reg(R19_24XX_KBR1); + omap_cfg_reg(V18_24XX_KBR2); + omap_cfg_reg(M21_24XX_KBR3); + omap_cfg_reg(E5__24XX_KBR4); + if (omap_has_menelaus()) { + omap_cfg_reg(B3__24XX_KBR5); + omap_cfg_reg(AA4_24XX_KBC2); + omap_cfg_reg(B13_24XX_KBC6); + } else { + omap_cfg_reg(M18_24XX_KBR5); + omap_cfg_reg(H19_24XX_KBC2); + omap_cfg_reg(N19_24XX_KBC6); + } + omap_cfg_reg(R20_24XX_KBC0); + omap_cfg_reg(M14_24XX_KBC1); + omap_cfg_reg(V17_24XX_KBC3); + omap_cfg_reg(P21_24XX_KBC4); + omap_cfg_reg(L14_24XX_KBC5); + } +} +#else +static inline void omap_init_kp(void) {} +#endif + +/*-------------------------------------------------------------------------*/ #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) @@ -240,6 +297,55 @@ static void __init omap_init_mmc(void) static inline void omap_init_mmc(void) {} #endif +/*-------------------------------------------------------------------------*/ + +/* Numbering for the SPI-capable controllers when used for SPI: + * spi = 1 + * uwire = 2 + * mmc1..2 = 3..4 + * mcbsp1..3 = 5..7 + */ + +#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) + +#define OMAP_UWIRE_BASE 0xfffb3000 + +static struct resource uwire_resources[] = { + { + .start = OMAP_UWIRE_BASE, + .end = OMAP_UWIRE_BASE + 0x20, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_uwire_device = { + .name = "omap_uwire", + .id = -1, + .dev = { + .release = omap_nop_release, + }, + .num_resources = ARRAY_SIZE(uwire_resources), + .resource = uwire_resources, +}; + +static void omap_init_uwire(void) +{ + /* FIXME define and use a boot tag; not all boards will be hooking + * up devices to the microwire controller, and multi-board configs + * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway... + */ + + /* board-specific code must configure chipselects (only a few + * are normally used) and SCLK/SDI/SDO (each has two choices). + */ + (void) platform_device_register(&omap_uwire_device); +} +#else +static inline void omap_init_uwire(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) #ifdef CONFIG_ARCH_OMAP24XX @@ -310,40 +416,6 @@ static void omap_init_rng(void) static inline void omap_init_rng(void) {} #endif -#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) - -static struct omap_lcd_config omap_fb_conf; - -static u64 omap_fb_dma_mask = ~(u32)0; - -static struct platform_device omap_fb_device = { - .name = "omapfb", - .id = -1, - .dev = { - .release = omap_nop_release, - .dma_mask = &omap_fb_dma_mask, - .coherent_dma_mask = ~(u32)0, - .platform_data = &omap_fb_conf, - }, - .num_resources = 0, -}; - -static inline void omap_init_fb(void) -{ - const struct omap_lcd_config *conf; - - conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf != NULL) - omap_fb_conf = *conf; - platform_device_register(&omap_fb_device); -} - -#else - -static inline void omap_init_fb(void) {} - -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -369,9 +441,10 @@ static int __init omap_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_fb(); omap_init_i2c(); + omap_init_kp(); omap_init_mmc(); + omap_init_uwire(); omap_init_wdt(); omap_init_rng(); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index a4e5ac77f6d..5dac4230360 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1258,6 +1258,11 @@ void omap_stop_lcd_dma(void) omap_writew(w, OMAP1610_DMA_LCD_CTRL); } +int omap_lcd_dma_ext_running(void) +{ + return lcd_dma.ext_ctrl && lcd_dma.active; +} + /*----------------------------------------------------------------------------*/ static int __init omap_init_dma(void) @@ -1389,6 +1394,7 @@ EXPORT_SYMBOL(omap_free_lcd_dma); EXPORT_SYMBOL(omap_enable_lcd_dma); EXPORT_SYMBOL(omap_setup_lcd_dma); EXPORT_SYMBOL(omap_stop_lcd_dma); +EXPORT_SYMBOL(omap_lcd_dma_ext_running); EXPORT_SYMBOL(omap_set_lcd_dma_b1); EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 38d7ebf8792..eba3cb52ad8 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -97,6 +97,32 @@ int omap_dm_timers_active(void) } +/** + * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR + * @inputmask: current value of idlect mask + */ +__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) +{ + int n; + + /* If ARMXOR cannot be idled this function call is unnecessary */ + if (!(inputmask & (1 << 1))) + return inputmask; + + /* If any active timer is using ARMXOR return modified mask */ + for (n = 0; dm_timers[n].base; ++n) + if (omap_dm_timer_read_reg(&dm_timers[n], OMAP_TIMER_CTRL_REG)& + OMAP_TIMER_CTRL_ST) { + if (((omap_readl(MOD_CONF_CTRL_1)>>(n*2)) & 0x03) == 0) + inputmask &= ~(1 << 1); + else + inputmask &= ~(1 << 2); + } + + return inputmask; +} + + void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { int n = (timer - dm_timers) << 1; diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c new file mode 100644 index 00000000000..305e9b990b7 --- /dev/null +++ b/arch/arm/plat-omap/fb.c @@ -0,0 +1,80 @@ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/bootmem.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/arch/board.h> +#include <asm/arch/sram.h> +#include <asm/arch/omapfb.h> + +#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +static struct omapfb_platform_data omapfb_config; + +static u64 omap_fb_dma_mask = ~(u32)0; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omapfb_config, + }, + .num_resources = 0, +}; + +/* called from map_io */ +void omapfb_reserve_mem(void) +{ + const struct omap_fbmem_config *fbmem_conf; + + omapfb_config.fbmem.fb_sram_start = omap_fb_sram_start; + omapfb_config.fbmem.fb_sram_size = omap_fb_sram_size; + + fbmem_conf = omap_get_config(OMAP_TAG_FBMEM, struct omap_fbmem_config); + + if (fbmem_conf != NULL) { + /* indicate that the bootloader already initialized the + * fb device, so we'll skip that part in the fb driver + */ + omapfb_config.fbmem.fb_sdram_start = fbmem_conf->fb_sdram_start; + omapfb_config.fbmem.fb_sdram_size = fbmem_conf->fb_sdram_size; + if (fbmem_conf->fb_sdram_size) { + pr_info("Reserving %u bytes SDRAM for frame buffer\n", + fbmem_conf->fb_sdram_size); + reserve_bootmem(fbmem_conf->fb_sdram_start, + fbmem_conf->fb_sdram_size); + } + } +} + +static inline int omap_init_fb(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf == NULL) + return 0; + + omapfb_config.lcd = *conf; + + return platform_device_register(&omap_fb_device); +} + +arch_initcall(omap_init_fb); + +#else + +void omapfb_reserve_mem(void) {} + +#endif + + diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index b4d5b9e4bfc..d3c8ea7eecf 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -174,7 +174,7 @@ static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1]; @@ -223,7 +223,7 @@ static inline int gpio_valid(int gpio) return 0; } #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510() && gpio < 16) + if (cpu_is_omap15xx() && gpio < 16) return 0; #endif #if defined(CONFIG_ARCH_OMAP16XX) @@ -402,13 +402,13 @@ static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int tr u32 gpio_bit = 1 << gpio; MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQT_LOW); + trigger & __IRQT_LOWLVL); MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQT_HIGH); + trigger & __IRQT_HIGHLVL); MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQT_RISING); + trigger & __IRQT_RISEDGE); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQT_FALLING); + trigger & __IRQT_FALEDGE); /* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level * triggering requested. */ } @@ -422,9 +422,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger == IRQT_RISING) + if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; - else if (trigger == IRQT_FALLING) + else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; @@ -432,9 +432,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger == IRQT_RISING) + if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; - else if (trigger == IRQT_FALLING) + else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; @@ -446,20 +446,21 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) reg += OMAP1610_GPIO_EDGE_CTRL1; gpio &= 0x07; /* We allow only edge triggering, i.e. two lowest bits */ - if (trigger & ~IRQT_BOTHEDGE) + if (trigger & (__IRQT_LOWLVL | __IRQT_HIGHLVL)) BUG(); - /* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */ - trigger &= 0x03; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - l |= trigger << (gpio << 1); + if (trigger & __IRQT_RISEDGE) + l |= 2 << (gpio << 1); + if (trigger & __IRQT_FALEDGE) + l |= 1 << (gpio << 1); break; case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger == IRQT_RISING) + if (trigger & __IRQT_RISEDGE) l |= 1 << gpio; - else if (trigger == IRQT_FALLING) + else if (trigger & __IRQT_FALEDGE) l &= ~(1 << gpio); else goto bad; @@ -491,7 +492,9 @@ static int gpio_irq_type(unsigned irq, unsigned type) if (check_gpio(gpio) < 0) return -EINVAL; - if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE)) + if (type & IRQT_PROBE) + return -EINVAL; + if (!cpu_is_omap24xx() && (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL))) return -EINVAL; bank = get_gpio_bank(gpio); @@ -755,13 +758,32 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif - while(1) { - isr = __raw_readl(isr_reg); - _enable_gpio_irqbank(bank, isr, 0); - _clear_gpio_irqbank(bank, isr); - _enable_gpio_irqbank(bank, isr, 1); - desc->chip->unmask(irq); + u32 isr_saved, level_mask = 0; + + isr_saved = isr = __raw_readl(isr_reg); + + if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) + isr &= 0x0000ffff; + + if (cpu_is_omap24xx()) + level_mask = + __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + + /* clear edge sensitive interrupts before handler(s) are + called so that we don't miss any interrupt occurred while + executing them */ + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); + _clear_gpio_irqbank(bank, isr_saved & ~level_mask); + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); + + /* if there is only edge sensitive GPIO pin interrupts + configured, we could unmask GPIO bank interrupt immediately */ + if (!level_mask) + desc->chip->unmask(irq); if (!isr) break; @@ -774,6 +796,20 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, d = irq_desc + gpio_irq; desc_handle_irq(gpio_irq, d, regs); } + + if (cpu_is_omap24xx()) { + /* clear level sensitive interrupts after handler(s) */ + _enable_gpio_irqbank(bank, isr_saved & level_mask, 0); + _clear_gpio_irqbank(bank, isr_saved & level_mask); + _enable_gpio_irqbank(bank, isr_saved & level_mask, 1); + } + + /* if bank has any level sensitive GPIO pin interrupt + configured, we must unmask the bank interrupt only after + handler(s) are executed in order to avoid spurious bank + interrupt */ + if (level_mask) + desc->chip->unmask(irq); } } @@ -848,7 +884,7 @@ static int __init _omap_gpio_init(void) initialized = 1; - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { gpio_ick = clk_get(NULL, "arm_gpio_ck"); if (IS_ERR(gpio_ick)) printk("Could not get arm_gpio_ck\n"); @@ -869,7 +905,7 @@ static int __init _omap_gpio_init(void) } #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_INFO "OMAP1510 GPIO hardware\n"); gpio_bank_count = 2; gpio_bank = gpio_bank_1510; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 1cd2cace7e1..196aac3ac32 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -34,7 +34,7 @@ #ifdef CONFIG_MCBSP_DEBUG #define DBG(x...) printk(x) #else -#define DBG(x...) do { } while (0) +#define DBG(x...) do { } while (0) #endif struct omap_mcbsp { @@ -44,6 +44,7 @@ struct omap_mcbsp { omap_mcbsp_word_length rx_word_length; omap_mcbsp_word_length tx_word_length; + omap_mcbsp_io_type_t io_type; /* IRQ or poll */ /* IRQ based TX/RX */ int rx_irq; int tx_irq; @@ -64,10 +65,19 @@ struct omap_mcbsp { }; static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; +#ifdef CONFIG_ARCH_OMAP1 static struct clk *mcbsp_dsp_ck = 0; static struct clk *mcbsp_api_ck = 0; static struct clk *mcbsp_dspxor_ck = 0; - +#endif +#ifdef CONFIG_ARCH_OMAP2 +static struct clk *mcbsp1_ick = 0; +static struct clk *mcbsp1_fck = 0; +static struct clk *mcbsp2_ick = 0; +static struct clk *mcbsp2_fck = 0; +static struct clk *sys_ck = 0; +static struct clk *sys_clkout = 0; +#endif static void omap_mcbsp_dump_reg(u8 id) { @@ -88,7 +98,6 @@ static void omap_mcbsp_dump_reg(u8 id) DBG("***********************\n"); } - static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id, struct pt_regs *regs) { struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id); @@ -109,7 +118,6 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id, struct pt_re return IRQ_HANDLED; } - static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) { struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data); @@ -176,7 +184,7 @@ static int omap_mcbsp_check(unsigned int id) return 0; } - if (cpu_is_omap1510() || cpu_is_omap16xx()) { + if (cpu_is_omap15xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) { if (id > OMAP_MAX_MCBSP_COUNT) { printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); return -1; @@ -187,9 +195,10 @@ static int omap_mcbsp_check(unsigned int id) return -1; } +#ifdef CONFIG_ARCH_OMAP1 static void omap_mcbsp_dsp_request(void) { - if (cpu_is_omap1510() || cpu_is_omap16xx()) { + if (cpu_is_omap15xx() || cpu_is_omap16xx()) { clk_enable(mcbsp_dsp_ck); clk_enable(mcbsp_api_ck); @@ -207,12 +216,49 @@ static void omap_mcbsp_dsp_request(void) static void omap_mcbsp_dsp_free(void) { - if (cpu_is_omap1510() || cpu_is_omap16xx()) { + if (cpu_is_omap15xx() || cpu_is_omap16xx()) { clk_disable(mcbsp_dspxor_ck); clk_disable(mcbsp_dsp_ck); clk_disable(mcbsp_api_ck); } } +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static void omap2_mcbsp2_mux_setup(void) +{ + omap_cfg_reg(Y15_24XX_MCBSP2_CLKX); + omap_cfg_reg(R14_24XX_MCBSP2_FSX); + omap_cfg_reg(W15_24XX_MCBSP2_DR); + omap_cfg_reg(V15_24XX_MCBSP2_DX); + omap_cfg_reg(V14_24XX_GPIO117); + omap_cfg_reg(W14_24XX_SYS_CLKOUT); +} +#endif + +/* + * We can choose between IRQ based or polled IO. + * This needs to be called before omap_mcbsp_request(). + */ +int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) +{ + if (omap_mcbsp_check(id) < 0) + return -EINVAL; + + spin_lock(&mcbsp[id].lock); + + if (!mcbsp[id].free) { + printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1); + spin_unlock(&mcbsp[id].lock); + return -EINVAL; + } + + mcbsp[id].io_type = io_type; + + spin_unlock(&mcbsp[id].lock); + + return 0; +} int omap_mcbsp_request(unsigned int id) { @@ -221,12 +267,26 @@ int omap_mcbsp_request(unsigned int id) if (omap_mcbsp_check(id) < 0) return -EINVAL; +#ifdef CONFIG_ARCH_OMAP1 /* * On 1510, 1610 and 1710, McBSP1 and McBSP3 * are DSP public peripherals. */ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) omap_mcbsp_dsp_request(); +#endif + +#ifdef CONFIG_ARCH_OMAP2 + if (cpu_is_omap24xx()) { + if (id == OMAP_MCBSP1) { + clk_enable(mcbsp1_ick); + clk_enable(mcbsp1_fck); + } else { + clk_enable(mcbsp2_ick); + clk_enable(mcbsp2_fck); + } + } +#endif spin_lock(&mcbsp[id].lock); if (!mcbsp[id].free) { @@ -238,30 +298,33 @@ int omap_mcbsp_request(unsigned int id) mcbsp[id].free = 0; spin_unlock(&mcbsp[id].lock); - /* We need to get IRQs here */ - err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0, - "McBSP", - (void *) (&mcbsp[id])); - if (err != 0) { - printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n", - mcbsp[id].tx_irq, mcbsp[id].id); - return err; - } + if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + /* We need to get IRQs here */ + err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0, + "McBSP", + (void *) (&mcbsp[id])); + if (err != 0) { + printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n", + mcbsp[id].tx_irq, mcbsp[id].id); + return err; + } - init_completion(&(mcbsp[id].tx_irq_completion)); + init_completion(&(mcbsp[id].tx_irq_completion)); - err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0, - "McBSP", - (void *) (&mcbsp[id])); - if (err != 0) { - printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n", - mcbsp[id].rx_irq, mcbsp[id].id); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); - return err; + err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0, + "McBSP", + (void *) (&mcbsp[id])); + if (err != 0) { + printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n", + mcbsp[id].rx_irq, mcbsp[id].id); + free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + return err; + } + + init_completion(&(mcbsp[id].rx_irq_completion)); } - init_completion(&(mcbsp[id].rx_irq_completion)); return 0; } @@ -271,8 +334,24 @@ void omap_mcbsp_free(unsigned int id) if (omap_mcbsp_check(id) < 0) return; - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) - omap_mcbsp_dsp_free(); +#ifdef CONFIG_ARCH_OMAP1 + if (cpu_class_is_omap1()) { + if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) + omap_mcbsp_dsp_free(); + } +#endif + +#ifdef CONFIG_ARCH_OMAP2 + if (cpu_is_omap24xx()) { + if (id == OMAP_MCBSP1) { + clk_disable(mcbsp1_ick); + clk_disable(mcbsp1_fck); + } else { + clk_disable(mcbsp2_ick); + clk_disable(mcbsp2_fck); + } + } +#endif spin_lock(&mcbsp[id].lock); if (mcbsp[id].free) { @@ -284,9 +363,11 @@ void omap_mcbsp_free(unsigned int id) mcbsp[id].free = 1; spin_unlock(&mcbsp[id].lock); - /* Free IRQs */ - free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); - free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + if (mcbsp[id].io_type == OMAP_MCBSP_IRQ_IO) { + /* Free IRQs */ + free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); + free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); + } } /* @@ -461,6 +542,115 @@ u32 omap_mcbsp_recv_word(unsigned int id) } +int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) +{ + u32 io_base = mcbsp[id].io_base; + omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length; + omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length; + u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; + + if (tx_word_length != rx_word_length) + return -EINVAL; + + /* First we wait for the transmitter to be ready */ + spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); + while (!(spcr2 & XRDY)) { + spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); + if (attempts++ > 1000) { + /* We must reset the transmitter */ + OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST)); + udelay(10); + OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); + udelay(10); + printk("McBSP transmitter not ready\n"); + return -EAGAIN; + } + } + + /* Now we can push the data */ + if (tx_word_length > OMAP_MCBSP_WORD_16) + OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); + OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff); + + /* We wait for the receiver to be ready */ + spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); + while (!(spcr1 & RRDY)) { + spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); + if (attempts++ > 1000) { + /* We must reset the receiver */ + OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST)); + udelay(10); + OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); + udelay(10); + printk("McBSP receiver not ready\n"); + return -EAGAIN; + } + } + + /* Receiver is ready, let's read the dummy data */ + if (rx_word_length > OMAP_MCBSP_WORD_16) + word_msb = OMAP_MCBSP_READ(io_base, DRR2); + word_lsb = OMAP_MCBSP_READ(io_base, DRR1); + + return 0; +} + +int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word) +{ + u32 io_base = mcbsp[id].io_base, clock_word = 0; + omap_mcbsp_word_length tx_word_length = mcbsp[id].tx_word_length; + omap_mcbsp_word_length rx_word_length = mcbsp[id].rx_word_length; + u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; + + if (tx_word_length != rx_word_length) + return -EINVAL; + + /* First we wait for the transmitter to be ready */ + spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); + while (!(spcr2 & XRDY)) { + spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); + if (attempts++ > 1000) { + /* We must reset the transmitter */ + OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST)); + udelay(10); + OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); + udelay(10); + printk("McBSP transmitter not ready\n"); + return -EAGAIN; + } + } + + /* We first need to enable the bus clock */ + if (tx_word_length > OMAP_MCBSP_WORD_16) + OMAP_MCBSP_WRITE(io_base, DXR2, clock_word >> 16); + OMAP_MCBSP_WRITE(io_base, DXR1, clock_word & 0xffff); + + /* We wait for the receiver to be ready */ + spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); + while (!(spcr1 & RRDY)) { + spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); + if (attempts++ > 1000) { + /* We must reset the receiver */ + OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST)); + udelay(10); + OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); + udelay(10); + printk("McBSP receiver not ready\n"); + return -EAGAIN; + } + } + + /* Receiver is ready, there is something for us */ + if (rx_word_length > OMAP_MCBSP_WORD_16) + word_msb = OMAP_MCBSP_READ(io_base, DRR2); + word_lsb = OMAP_MCBSP_READ(io_base, DRR1); + + word[0] = (word_lsb | (word_msb << 16)); + + return 0; +} + + /* * Simple DMA based buffer rx/tx routines. * Nothing fancy, just a single buffer tx/rx through DMA. @@ -471,6 +661,9 @@ u32 omap_mcbsp_recv_word(unsigned int id) int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { int dma_tx_ch; + int src_port = 0; + int dest_port = 0; + int sync_dev = 0; if (omap_mcbsp_check(id) < 0) return -EINVAL; @@ -487,20 +680,27 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng init_completion(&(mcbsp[id].tx_dma_completion)); + if (cpu_class_is_omap1()) { + src_port = OMAP_DMA_PORT_TIPB; + dest_port = OMAP_DMA_PORT_EMIFF; + } + if (cpu_is_omap24xx()) + sync_dev = mcbsp[id].dma_tx_sync; + omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, - 0, 0); + sync_dev, 0); omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, - OMAP_DMA_PORT_TIPB, + src_port, OMAP_DMA_AMODE_CONSTANT, mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, 0, 0); omap_set_dma_src_params(mcbsp[id].dma_tx_lch, - OMAP_DMA_PORT_EMIFF, + dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); @@ -514,6 +714,9 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) { int dma_rx_ch; + int src_port = 0; + int dest_port = 0; + int sync_dev = 0; if (omap_mcbsp_check(id) < 0) return -EINVAL; @@ -530,20 +733,27 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int leng init_completion(&(mcbsp[id].rx_dma_completion)); + if (cpu_class_is_omap1()) { + src_port = OMAP_DMA_PORT_TIPB; + dest_port = OMAP_DMA_PORT_EMIFF; + } + if (cpu_is_omap24xx()) + sync_dev = mcbsp[id].dma_rx_sync; + omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, OMAP_DMA_DATA_TYPE_S16, length >> 1, 1, OMAP_DMA_SYNC_ELEMENT, - 0, 0); + sync_dev, 0); omap_set_dma_src_params(mcbsp[id].dma_rx_lch, - OMAP_DMA_PORT_TIPB, + src_port, OMAP_DMA_AMODE_CONSTANT, mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, - OMAP_DMA_PORT_EMIFF, + dest_port, OMAP_DMA_AMODE_POST_INC, buffer, 0, 0); @@ -688,6 +898,23 @@ static const struct omap_mcbsp_info mcbsp_1610[] = { }; #endif +#if defined(CONFIG_ARCH_OMAP24XX) +static const struct omap_mcbsp_info mcbsp_24xx[] = { + [0] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE), + .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, + .rx_irq = INT_24XX_MCBSP1_IRQ_RX, + .tx_irq = INT_24XX_MCBSP1_IRQ_TX, + }, + [1] = { .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE), + .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, + .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, + .rx_irq = INT_24XX_MCBSP2_IRQ_RX, + .tx_irq = INT_24XX_MCBSP2_IRQ_TX, + }, +}; +#endif + static int __init omap_mcbsp_init(void) { int mcbsp_count = 0, i; @@ -695,6 +922,7 @@ static int __init omap_mcbsp_init(void) printk("Initializing OMAP McBSP system\n"); +#ifdef CONFIG_ARCH_OMAP1 mcbsp_dsp_ck = clk_get(0, "dsp_ck"); if (IS_ERR(mcbsp_dsp_ck)) { printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n"); @@ -710,6 +938,29 @@ static int __init omap_mcbsp_init(void) printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n"); return PTR_ERR(mcbsp_dspxor_ck); } +#endif +#ifdef CONFIG_ARCH_OMAP2 + mcbsp1_ick = clk_get(0, "mcbsp1_ick"); + if (IS_ERR(mcbsp1_ick)) { + printk(KERN_ERR "mcbsp: could not acquire mcbsp1_ick handle.\n"); + return PTR_ERR(mcbsp1_ick); + } + mcbsp1_fck = clk_get(0, "mcbsp1_fck"); + if (IS_ERR(mcbsp1_fck)) { + printk(KERN_ERR "mcbsp: could not acquire mcbsp1_fck handle.\n"); + return PTR_ERR(mcbsp1_fck); + } + mcbsp2_ick = clk_get(0, "mcbsp2_ick"); + if (IS_ERR(mcbsp2_ick)) { + printk(KERN_ERR "mcbsp: could not acquire mcbsp2_ick handle.\n"); + return PTR_ERR(mcbsp2_ick); + } + mcbsp2_fck = clk_get(0, "mcbsp2_fck"); + if (IS_ERR(mcbsp2_fck)) { + printk(KERN_ERR "mcbsp: could not acquire mcbsp2_fck handle.\n"); + return PTR_ERR(mcbsp2_fck); + } +#endif #ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) { @@ -718,7 +969,7 @@ static int __init omap_mcbsp_init(void) } #endif #ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { mcbsp_info = mcbsp_1510; mcbsp_count = ARRAY_SIZE(mcbsp_1510); } @@ -729,6 +980,19 @@ static int __init omap_mcbsp_init(void) mcbsp_count = ARRAY_SIZE(mcbsp_1610); } #endif +#if defined(CONFIG_ARCH_OMAP24XX) + if (cpu_is_omap24xx()) { + mcbsp_info = mcbsp_24xx; + mcbsp_count = ARRAY_SIZE(mcbsp_24xx); + + /* REVISIT: where's the right place? */ + omap2_mcbsp2_mux_setup(); + sys_ck = clk_get(0, "sys_ck"); + sys_clkout = clk_get(0, "sys_clkout"); + clk_set_parent(sys_clkout, sys_ck); + clk_enable(sys_clkout); + } +#endif for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) { if (i >= mcbsp_count) { mcbsp[i].io_base = 0; @@ -741,6 +1005,7 @@ static int __init omap_mcbsp_init(void) mcbsp[i].dma_rx_lch = -1; mcbsp[i].io_base = mcbsp_info[i].virt_base; + mcbsp[i].io_type = OMAP_MCBSP_IRQ_IO; /* Default I/O is IRQ based */ mcbsp[i].tx_irq = mcbsp_info[i].tx_irq; mcbsp[i].rx_irq = mcbsp_info[i].rx_irq; mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync; @@ -751,11 +1016,11 @@ static int __init omap_mcbsp_init(void) return 0; } - arch_initcall(omap_mcbsp_init); EXPORT_SYMBOL(omap_mcbsp_config); EXPORT_SYMBOL(omap_mcbsp_request); +EXPORT_SYMBOL(omap_mcbsp_set_io_type); EXPORT_SYMBOL(omap_mcbsp_free); EXPORT_SYMBOL(omap_mcbsp_start); EXPORT_SYMBOL(omap_mcbsp_stop); @@ -763,4 +1028,6 @@ EXPORT_SYMBOL(omap_mcbsp_xmit_word); EXPORT_SYMBOL(omap_mcbsp_recv_word); EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); EXPORT_SYMBOL(omap_mcbsp_recv_buffer); +EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); +EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 5cc6775c789..37792d43738 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -62,9 +62,6 @@ int ocpi_enable(void) if (!cpu_is_omap16xx()) return -ENODEV; - /* Make sure there's clock for OCPI */ - clk_enable(ocpi_ck); - /* Enable access for OHCI in OCPI */ val = omap_readl(OCPI_PROT); val &= ~0xff; diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index 093efd786f2..1a24e2c1071 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -38,6 +38,7 @@ #include <linux/pm.h> #include <linux/sched.h> #include <linux/proc_fs.h> +#include <linux/pm.h> #include <linux/interrupt.h> #include <asm/io.h> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ee82763b02b..b7bf09b1b41 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -16,24 +16,94 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <asm/mach/map.h> #include <asm/tlb.h> #include <asm/io.h> #include <asm/cacheflush.h> +#include <asm/mach/map.h> + #include <asm/arch/sram.h> +#include <asm/arch/board.h> #define OMAP1_SRAM_PA 0x20000000 #define OMAP1_SRAM_VA 0xd0000000 #define OMAP2_SRAM_PA 0x40200000 +#define OMAP2_SRAM_PUB_PA 0x4020f800 #define OMAP2_SRAM_VA 0xd0000000 +#define OMAP2_SRAM_PUB_VA 0xd0000800 +#if defined(CONFIG_ARCH_OMAP24XX) +#define SRAM_BOOTLOADER_SZ 0x00 +#else #define SRAM_BOOTLOADER_SZ 0x80 +#endif + +#define VA_REQINFOPERM0 IO_ADDRESS(0x68005048) +#define VA_READPERM0 IO_ADDRESS(0x68005050) +#define VA_WRITEPERM0 IO_ADDRESS(0x68005058) +#define VA_CONTROL_STAT IO_ADDRESS(0x480002F8) +#define GP_DEVICE 0x300 +#define TYPE_MASK 0x700 + +#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1))) static unsigned long omap_sram_base; static unsigned long omap_sram_size; static unsigned long omap_sram_ceil; +unsigned long omap_fb_sram_start; +unsigned long omap_fb_sram_size; + +/* Depending on the target RAMFS firewall setup, the public usable amount of + * SRAM varies. The default accessable size for all device types is 2k. A GP + * device allows ARM11 but not other initators for full size. This + * functionality seems ok until some nice security API happens. + */ +static int is_sram_locked(void) +{ + int type = 0; + + if (cpu_is_omap242x()) + type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK; + + if (type == GP_DEVICE) { + /* RAMFW: R/W access to all initators for all qualifier sets */ + if (cpu_is_omap242x()) { + __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */ + __raw_writel(0xCFDE, VA_READPERM0); /* all i-read */ + __raw_writel(0xCFDE, VA_WRITEPERM0); /* all i-write */ + } + return 0; + } else + return 1; /* assume locked with no PPA or security driver */ +} + +void get_fb_sram_conf(unsigned long start_avail, unsigned size_avail, + unsigned long *start, unsigned long *size) +{ + const struct omap_fbmem_config *fbmem_conf; + + fbmem_conf = omap_get_config(OMAP_TAG_FBMEM, struct omap_fbmem_config); + if (fbmem_conf != NULL) { + *start = fbmem_conf->fb_sram_start; + *size = fbmem_conf->fb_sram_size; + } else { + *size = 0; + *start = 0; + } + + if (*size && ( + *start < start_avail || + *start + *size > start_avail + size_avail)) { + printk(KERN_ERR "invalid FB SRAM configuration\n"); + *start = start_avail; + *size = size_avail; + } + + if (*size) + pr_info("Reserving %lu bytes SRAM for frame buffer\n", *size); +} + /* * The amount of SRAM depends on the core type. * Note that we cannot try to test for SRAM here because writes @@ -42,26 +112,45 @@ static unsigned long omap_sram_ceil; */ void __init omap_detect_sram(void) { - if (!cpu_is_omap24xx()) + unsigned long sram_start; + + if (cpu_is_omap24xx()) { + if (is_sram_locked()) { + omap_sram_base = OMAP2_SRAM_PUB_VA; + sram_start = OMAP2_SRAM_PUB_PA; + omap_sram_size = 0x800; /* 2K */ + } else { + omap_sram_base = OMAP2_SRAM_VA; + sram_start = OMAP2_SRAM_PA; + if (cpu_is_omap242x()) + omap_sram_size = 0xa0000; /* 640K */ + else if (cpu_is_omap243x()) + omap_sram_size = 0x10000; /* 64K */ + } + } else { omap_sram_base = OMAP1_SRAM_VA; - else - omap_sram_base = OMAP2_SRAM_VA; - - if (cpu_is_omap730()) - omap_sram_size = 0x32000; /* 200K */ - else if (cpu_is_omap15xx()) - omap_sram_size = 0x30000; /* 192K */ - else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710()) - omap_sram_size = 0x4000; /* 16K */ - else if (cpu_is_omap1611()) - omap_sram_size = 0x3e800; /* 250K */ - else if (cpu_is_omap2420()) - omap_sram_size = 0xa0014; /* 640K */ - else { - printk(KERN_ERR "Could not detect SRAM size\n"); - omap_sram_size = 0x4000; + sram_start = OMAP1_SRAM_PA; + + if (cpu_is_omap730()) + omap_sram_size = 0x32000; /* 200K */ + else if (cpu_is_omap15xx()) + omap_sram_size = 0x30000; /* 192K */ + else if (cpu_is_omap1610() || cpu_is_omap1621() || + cpu_is_omap1710()) + omap_sram_size = 0x4000; /* 16K */ + else if (cpu_is_omap1611()) + omap_sram_size = 0x3e800; /* 250K */ + else { + printk(KERN_ERR "Could not detect SRAM size\n"); + omap_sram_size = 0x4000; + } } - + get_fb_sram_conf(sram_start + SRAM_BOOTLOADER_SZ, + omap_sram_size - SRAM_BOOTLOADER_SZ, + &omap_fb_sram_start, &omap_fb_sram_size); + if (omap_fb_sram_size) + omap_sram_size -= sram_start + omap_sram_size - + omap_fb_sram_start; omap_sram_ceil = omap_sram_base + omap_sram_size; } @@ -80,12 +169,20 @@ static struct map_desc omap_sram_io_desc[] __initdata = { */ void __init omap_map_sram(void) { + unsigned long base; + if (omap_sram_size == 0) return; if (cpu_is_omap24xx()) { omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; - omap_sram_io_desc[0].pfn = __phys_to_pfn(OMAP2_SRAM_PA); + + if (is_sram_locked()) + base = OMAP2_SRAM_PUB_PA; + else + base = OMAP2_SRAM_PA; + base = ROUND_DOWN(base, PAGE_SIZE); + omap_sram_io_desc[0].pfn = __phys_to_pfn(base); } omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE; @@ -93,7 +190,8 @@ void __init omap_map_sram(void) iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", - omap_sram_io_desc[0].pfn, omap_sram_io_desc[0].virtual, + __pfn_to_phys(omap_sram_io_desc[0].pfn), + omap_sram_io_desc[0].virtual, omap_sram_io_desc[0].length); /* @@ -118,8 +216,9 @@ void * omap_sram_push(void * start, unsigned long size) printk(KERN_ERR "Not enough space in SRAM\n"); return NULL; } + omap_sram_ceil -= size; - omap_sram_ceil &= ~0x3; + omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *)); memcpy((void *)omap_sram_ceil, start, size); return (void *)omap_sram_ceil; diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c new file mode 100644 index 00000000000..b2a943bf11e --- /dev/null +++ b/arch/arm/plat-omap/timer32k.c @@ -0,0 +1,325 @@ +/* + * linux/arch/arm/plat-omap/timer32k.c + * + * OMAP 32K Timer + * + * Copyright (C) 2004 - 2005 Nokia Corporation + * Partial timer rewrite and additional dynamic tick timer support by + * Tony Lindgen <tony@atomide.com> and + * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * + * MPU timer code based on the older MPU timer code for OMAP + * Copyright (C) 2000 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/system.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/leds.h> +#include <asm/irq.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> + +struct sys_timer omap_timer; + +/* + * --------------------------------------------------------------------------- + * 32KHz OS timer + * + * This currently works only on 16xx, as 1510 does not have the continuous + * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track + * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer + * on 1510 would be possible, but the timer would not be as accurate as + * with the 32KHz synchronized timer. + * --------------------------------------------------------------------------- + */ + +#if defined(CONFIG_ARCH_OMAP16XX) +#define TIMER_32K_SYNCHRONIZED 0xfffbc410 +#elif defined(CONFIG_ARCH_OMAP24XX) +#define TIMER_32K_SYNCHRONIZED 0x48004010 +#else +#error OMAP 32KHz timer does not currently work on 15XX! +#endif + +/* 16xx specific defines */ +#define OMAP1_32K_TIMER_BASE 0xfffb9000 +#define OMAP1_32K_TIMER_CR 0x08 +#define OMAP1_32K_TIMER_TVR 0x00 +#define OMAP1_32K_TIMER_TCR 0x04 + +/* 24xx specific defines */ +#define OMAP2_GP_TIMER_BASE 0x48028000 +#define CM_CLKSEL_WKUP 0x48008440 +#define GP_TIMER_TIDR 0x00 +#define GP_TIMER_TISR 0x18 +#define GP_TIMER_TIER 0x1c +#define GP_TIMER_TCLR 0x24 +#define GP_TIMER_TCRR 0x28 +#define GP_TIMER_TLDR 0x2c +#define GP_TIMER_TTGR 0x30 +#define GP_TIMER_TSICR 0x40 + +#define OMAP_32K_TICKS_PER_HZ (32768 / HZ) + +/* + * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1 + * so with HZ = 128, TVR = 255. + */ +#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1) + +#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ + (((nr_jiffies) * (clock_rate)) / HZ) + +static inline void omap_32k_timer_write(int val, int reg) +{ + if (cpu_class_is_omap1()) + omap_writew(val, OMAP1_32K_TIMER_BASE + reg); + + if (cpu_is_omap24xx()) + omap_writel(val, OMAP2_GP_TIMER_BASE + reg); +} + +static inline unsigned long omap_32k_timer_read(int reg) +{ + if (cpu_class_is_omap1()) + return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff; + + if (cpu_is_omap24xx()) + return omap_readl(OMAP2_GP_TIMER_BASE + reg); +} + +/* + * The 32KHz synchronized timer is an additional timer on 16xx. + * It is always running. + */ +static inline unsigned long omap_32k_sync_timer_read(void) +{ + return omap_readl(TIMER_32K_SYNCHRONIZED); +} + +static inline void omap_32k_timer_start(unsigned long load_val) +{ + if (cpu_class_is_omap1()) { + omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR); + omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR); + } + + if (cpu_is_omap24xx()) { + omap_32k_timer_write(0xffffffff - load_val, GP_TIMER_TCRR); + omap_32k_timer_write((1 << 1), GP_TIMER_TIER); + omap_32k_timer_write((1 << 1) | 1, GP_TIMER_TCLR); + } +} + +static inline void omap_32k_timer_stop(void) +{ + if (cpu_class_is_omap1()) + omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR); + + if (cpu_is_omap24xx()) + omap_32k_timer_write(0x0, GP_TIMER_TCLR); +} + +/* + * Rounds down to nearest usec. Note that this will overflow for larger values. + */ +static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k) +{ + return (ticks_32k * 5*5*5*5*5*5) >> 9; +} + +/* + * Rounds down to nearest nsec. + */ +static inline unsigned long long +omap_32k_ticks_to_nsecs(unsigned long ticks_32k) +{ + return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9; +} + +static unsigned long omap_32k_last_tick = 0; + +/* + * Returns elapsed usecs since last 32k timer interrupt + */ +static unsigned long omap_32k_timer_gettimeoffset(void) +{ + unsigned long now = omap_32k_sync_timer_read(); + return omap_32k_ticks_to_usecs(now - omap_32k_last_tick); +} + +/* + * Returns current time from boot in nsecs. It's OK for this to wrap + * around for now, as it's just a relative time stamp. + */ +unsigned long long sched_clock(void) +{ + return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read()); +} + +/* + * Timer interrupt for 32KHz timer. When dynamic tick is enabled, this + * function is also called from other interrupts to remove latency + * issues with dynamic tick. In the dynamic tick case, we need to lock + * with irqsave. + */ +static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long flags; + unsigned long now; + + write_seqlock_irqsave(&xtime_lock, flags); + + if (cpu_is_omap24xx()) { + u32 status = omap_32k_timer_read(GP_TIMER_TISR); + omap_32k_timer_write(status, GP_TIMER_TISR); + } + + now = omap_32k_sync_timer_read(); + + while (now - omap_32k_last_tick >= OMAP_32K_TICKS_PER_HZ) { + omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ; + timer_tick(regs); + } + + /* Restart timer so we don't drift off due to modulo or dynamic tick. + * By default we program the next timer to be continuous to avoid + * latencies during high system load. During dynamic tick operation the + * continuous timer can be overridden from pm_idle to be longer. + */ + omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now); + write_sequnlock_irqrestore(&xtime_lock, flags); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NO_IDLE_HZ +/* + * Programs the next timer interrupt needed. Called when dynamic tick is + * enabled, and to reprogram the ticks to skip from pm_idle. Note that + * we can keep the timer continuous, and don't need to set it to run in + * one-shot mode. This is because the timer will get reprogrammed again + * after next interrupt. + */ +void omap_32k_timer_reprogram(unsigned long next_tick) +{ + omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); +} + +static struct irqaction omap_32k_timer_irq; +extern struct timer_update_handler timer_update; + +static int omap_32k_timer_enable_dyn_tick(void) +{ + /* No need to reprogram timer, just use the next interrupt */ + return 0; +} + +static int omap_32k_timer_disable_dyn_tick(void) +{ + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); + return 0; +} + +static struct dyn_tick_timer omap_dyn_tick_timer = { + .enable = omap_32k_timer_enable_dyn_tick, + .disable = omap_32k_timer_disable_dyn_tick, + .reprogram = omap_32k_timer_reprogram, + .handler = omap_32k_timer_interrupt, +}; +#endif /* CONFIG_NO_IDLE_HZ */ + +static struct irqaction omap_32k_timer_irq = { + .name = "32KHz timer", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_32k_timer_interrupt, +}; + +static struct clk * gpt1_ick; +static struct clk * gpt1_fck; + +static __init void omap_init_32k_timer(void) +{ +#ifdef CONFIG_NO_IDLE_HZ + omap_timer.dyn_tick = &omap_dyn_tick_timer; +#endif + + if (cpu_class_is_omap1()) + setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); + if (cpu_is_omap24xx()) + setup_irq(37, &omap_32k_timer_irq); + omap_timer.offset = omap_32k_timer_gettimeoffset; + omap_32k_last_tick = omap_32k_sync_timer_read(); + + /* REVISIT: Check 24xx TIOCP_CFG settings after idle works */ + if (cpu_is_omap24xx()) { + omap_32k_timer_write(0, GP_TIMER_TCLR); + omap_writel(0, CM_CLKSEL_WKUP); /* 32KHz clock source */ + + gpt1_ick = clk_get(NULL, "gpt1_ick"); + if (IS_ERR(gpt1_ick)) + printk(KERN_ERR "Could not get gpt1_ick\n"); + else + clk_enable(gpt1_ick); + + gpt1_fck = clk_get(NULL, "gpt1_fck"); + if (IS_ERR(gpt1_fck)) + printk(KERN_ERR "Could not get gpt1_fck\n"); + else + clk_enable(gpt1_fck); + + mdelay(100); /* Wait for clocks to stabilize */ + + omap_32k_timer_write(0x7, GP_TIMER_TISR); + } + + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); +} + +/* + * --------------------------------------------------------------------------- + * Timer initialization + * --------------------------------------------------------------------------- + */ +static void __init omap_timer_init(void) +{ + omap_init_32k_timer(); +} + +struct sys_timer omap_timer = { + .init = omap_timer_init, + .offset = NULL, /* Initialized later */ +}; |