[ARM] 3340/1: Fix the PCI setup for direct master access to SDRAM

Patch from Catalin Marinas

The initial code did not configure the inbound memory windows for direct
master access to the SDRAM. This patch creates a 1:1 mapping between the
Versatile/PB PCI memory windows and its SDRAM. Note that an updated FPGA
image is needed for Versatile/PB since the original windows were 1MB and
not able to cover the whole SDRAM (now extended to 256MB). The patch also
fixes the PCI IRQ mapping for slot #2.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 48 insertions, 45 deletions

diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index b80d57d5169..722fbabc9cf 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -240,6 +240,14 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
         int i;
         int myslot = -1;
 	unsigned long val;
+	void __iomem *local_pci_cfg_base;
+
+	val = __raw_readl(SYS_PCICTL);
+	if (!(val & 1)) {
+		printk("Not plugged into PCI backplane!\n");
+		ret = -EIO;
+		goto out;
+	}
 
 	if (nr == 0) {
 		sys->mem_offset = 0;
@@ -253,48 +261,45 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
 	/*
 	 *  We need to discover the PCI core first to configure itself
 	 *  before the main PCI probing is performed
 	 */
-	for (i=0; i<32; i++) {
+	for (i=0; i<32; i++)
 		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
 		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
 			myslot = i;
-
-			__raw_writel(myslot, PCI_SELFID);
-			val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
-			val |= (1<<2);
-			__raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET);
 			break;
 		}
-	}
 
 	if (myslot == -1) {
 		printk("Cannot find PCI core!\n");
 		ret = -EIO;
-	} else {
-		printk("PCI core found (slot %d)\n",myslot);
-		/* Do not to map Versatile FPGA PCI device
-		   into memory space as we are short of
-		   mappable memory */
-		pci_slot_ignore |= (1 << myslot);
-		ret = 1;
+		goto out;
 	}
 
+	printk("PCI core found (slot %d)\n",myslot);
+
+	__raw_writel(myslot, PCI_SELFID);
+	local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
+
+	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
+	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
+
+	/*
+	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
+	 */
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
+
+	/*
+	 * Do not to map Versatile FPGA PCI device into memory space
+	 */
+	pci_slot_ignore |= (1 << myslot);
+	ret = 1;
+
  out:
 	return ret;
 }
@@ -305,18 +310,18 @@ struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
 }
 
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP?  - pci bus address
- */
 void __init pci_versatile_preinit(void)
 {
-}
+	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
+	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
+	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
 
-void __init pci_versatile_postinit(void)
-{
-}
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
+	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
 
+	__raw_writel(1, SYS_PCICTL);
+}
 
 /*
  * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
@@ -326,16 +331,15 @@ static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	int irq;
 	int devslot = PCI_SLOT(dev->devfn);
 
-	/* slot,  pin,  irq
-	    24	  1	27
-	    25    1	28	untested
-	    26	  1	29
-	    27    1	30	untested
-	*/
-
-	irq = 27 + ((slot + pin + 2) % 3);	/* Fudged */
+	/* slot,  pin,	irq
+	 *  24     1     27
+	 *  25     1     28
+	 *  26     1     29
+	 *  27     1     30
+	 */
+	irq = 27 + ((slot + pin - 1) & 3);
 
-	printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
+	printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
 
 	return irq;
 }
@@ -347,7 +351,6 @@ static struct hw_pci versatile_pci __initdata = {
 	.setup			= pci_versatile_setup,
 	.scan			= pci_versatile_scan_bus,
 	.preinit		= pci_versatile_preinit,
-	.postinit		= pci_versatile_postinit,
 };
 
 static int __init versatile_pci_init(void)