[ARM] S3C24XX: GPIO: Change to macros for GPIO numbering

Prepare to remove the large number of S3C2410_GPxn defines
by moving to S3C2410_GPx(n) in arch/arm.

The following perl was used to change the files:

    perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

4 files changed, 14 insertions, 14 deletions

diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d363b6f9000..68f3870991b 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -469,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 315c42e3127..dfc7010935d 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 4b2088cb05e..d43edede590 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -121,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index ad0fdc4a794..cba064b49a6 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -292,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -305,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -385,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */