Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

4 files changed, 244 insertions, 12 deletions

diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index b651e0a4b1c..77c3c202991 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -145,7 +145,6 @@ usage should require reading the full document.
         this though and the recommendation to allow only a single
         interface in STA mode at first!
       </para>
-!Finclude/net/mac80211.h ieee80211_if_types
 !Finclude/net/mac80211.h ieee80211_if_init_conf
 !Finclude/net/mac80211.h ieee80211_if_conf
     </chapter>
@@ -177,8 +176,7 @@ usage should require reading the full document.
         <title>functions/definitions</title>
 !Finclude/net/mac80211.h ieee80211_rx_status
 !Finclude/net/mac80211.h mac80211_rx_flags
-!Finclude/net/mac80211.h ieee80211_tx_control
-!Finclude/net/mac80211.h ieee80211_tx_status_flags
+!Finclude/net/mac80211.h ieee80211_tx_info
 !Finclude/net/mac80211.h ieee80211_rx
 !Finclude/net/mac80211.h ieee80211_rx_irqsafe
 !Finclude/net/mac80211.h ieee80211_tx_status
@@ -189,12 +187,11 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
 !Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_get_hdrlen
+!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
-!Finclude/net/mac80211.h ieee80211_start_queues
-!Finclude/net/mac80211.h ieee80211_stop_queues
 !Finclude/net/mac80211.h ieee80211_wake_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
       </sect1>
     </chapter>
 
@@ -230,8 +227,7 @@ usage should require reading the full document.
       <title>Multiple queues and QoS support</title>
       <para>TBD</para>
 !Finclude/net/mac80211.h ieee80211_tx_queue_params
-!Finclude/net/mac80211.h ieee80211_tx_queue_stats_data
-!Finclude/net/mac80211.h ieee80211_tx_queue
+!Finclude/net/mac80211.h ieee80211_tx_queue_stats
     </chapter>
 
     <chapter id="AP">
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index eb1a47b9742..c93fcdec246 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,24 @@ be removed from this file.
 
 ---------------------------
 
+What:	old static regulatory information and ieee80211_regdom module parameter
+When:	2.6.29
+Why:	The old regulatory infrastructure has been replaced with a new one
+	which does not require statically defined regulatory domains. We do
+	not want to keep static regulatory domains in the kernel due to the
+	the dynamic nature of regulatory law and localization. We kept around
+	the old static definitions for the regulatory domains of:
+		* US
+		* JP
+		* EU
+	and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
+	set. We also kept around the ieee80211_regdom module parameter in case
+	some applications were relying on it. Changing regulatory domains
+	can now be done instead by using nl80211, as is done with iw.
+Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
 What:	dev->power.power_state
 When:	July 2007
 Why:	Broken design for runtime control over driver power states, confusing
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
new file mode 100644
index 00000000000..a96989a8ff3
--- /dev/null
+++ b/Documentation/networking/regulatory.txt
@@ -0,0 +1,194 @@
+Linux wireless regulatory documentation
+---------------------------------------
+
+This document gives a brief review over how the Linux wireless
+regulatory infrastructure works.
+
+More up to date information can be obtained at the project's web page:
+
+http://wireless.kernel.org/en/developers/Regulatory
+
+Keeping regulatory domains in userspace
+---------------------------------------
+
+Due to the dynamic nature of regulatory domains we keep them
+in userspace and provide a framework for userspace to upload
+to the kernel one regulatory domain to be used as the central
+core regulatory domain all wireless devices should adhere to.
+
+How to get regulatory domains to the kernel
+-------------------------------------------
+
+Userspace gets a regulatory domain in the kernel by having
+a userspace agent build it and send it via nl80211. Only
+expected regulatory domains will be respected by the kernel.
+
+A currently available userspace agent which can accomplish this
+is CRDA - central regulatory domain agent. Its documented here:
+
+http://wireless.kernel.org/en/developers/Regulatory/CRDA
+
+Essentially the kernel will send a udev event when it knows
+it needs a new regulatory domain. A udev rule can be put in place
+to trigger crda to send the respective regulatory domain for a
+specific ISO/IEC 3166 alpha2.
+
+Below is an example udev rule which can be used:
+
+# Example file, should be put in /etc/udev/rules.d/regulatory.rules
+KERNEL=="regulatory*", ACTION=="change", SUBSYSTEM=="platform", RUN+="/sbin/crda"
+
+The alpha2 is passed as an environment variable under the variable COUNTRY.
+
+Who asks for regulatory domains?
+--------------------------------
+
+* Users
+
+Users can use iw:
+
+http://wireless.kernel.org/en/users/Documentation/iw
+
+An example:
+
+  # set regulatory domain to "Costa Rica"
+  iw reg set CR
+
+This will request the kernel to set the regulatory domain to
+the specificied alpha2. The kernel in turn will then ask userspace
+to provide a regulatory domain for the alpha2 specified by the user
+by sending a uevent.
+
+* Wireless subsystems for Country Information elements
+
+The kernel will send a uevent to inform userspace a new
+regulatory domain is required. More on this to be added
+as its integration is added.
+
+* Drivers
+
+If drivers determine they need a specific regulatory domain
+set they can inform the wireless core using regulatory_hint().
+They have two options -- they either provide an alpha2 so that
+crda can provide back a regulatory domain for that country or
+they can build their own regulatory domain based on internal
+custom knowledge so the wireless core can respect it.
+
+*Most* drivers will rely on the first mechanism of providing a
+regulatory hint with an alpha2. For these drivers there is an additional
+check that can be used to ensure compliance based on custom EEPROM
+regulatory data. This additional check can be used by drivers by
+registering on its struct wiphy a reg_notifier() callback. This notifier
+is called when the core's regulatory domain has been changed. The driver
+can use this to review the changes made and also review who made them
+(driver, user, country IE) and determine what to allow based on its
+internal EEPROM data. Devices drivers wishing to be capable of world
+roaming should use this callback. More on world roaming will be
+added to this document when its support is enabled.
+
+Device drivers who provide their own built regulatory domain
+do not need a callback as the channels registered by them are
+the only ones that will be allowed and therefore *additional*
+cannels cannot be enabled.
+
+Example code - drivers hinting an alpha2:
+------------------------------------------
+
+This example comes from the zd1211rw device driver. You can start
+by having a mapping of your device's EEPROM country/regulatory
+domain value to to a specific alpha2 as follows:
+
+static struct zd_reg_alpha2_map reg_alpha2_map[] = {
+	{ ZD_REGDOMAIN_FCC, "US" },
+	{ ZD_REGDOMAIN_IC, "CA" },
+	{ ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */
+	{ ZD_REGDOMAIN_JAPAN, "JP" },
+	{ ZD_REGDOMAIN_JAPAN_ADD, "JP" },
+	{ ZD_REGDOMAIN_SPAIN, "ES" },
+	{ ZD_REGDOMAIN_FRANCE, "FR" },
+
+Then you can define a routine to map your read EEPROM value to an alpha2,
+as follows:
+
+static int zd_reg2alpha2(u8 regdomain, char *alpha2)
+{
+	unsigned int i;
+	struct zd_reg_alpha2_map *reg_map;
+		for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) {
+			reg_map = &reg_alpha2_map[i];
+			if (regdomain == reg_map->reg) {
+			alpha2[0] = reg_map->alpha2[0];
+			alpha2[1] = reg_map->alpha2[1];
+			return 0;
+		}
+	}
+	return 1;
+}
+
+Lastly, you can then hint to the core of your discovered alpha2, if a match
+was found. You need to do this after you have registered your wiphy. You
+are expected to do this during initialization.
+
+	r = zd_reg2alpha2(mac->regdomain, alpha2);
+	if (!r)
+		regulatory_hint(hw->wiphy, alpha2, NULL);
+
+Example code - drivers providing a built in regulatory domain:
+--------------------------------------------------------------
+
+If you have regulatory information you can obtain from your
+driver and you *need* to use this we let you build a regulatory domain
+structure and pass it to the wireless core. To do this you should
+kmalloc() a structure big enough to hold your regulatory domain
+structure and you should then fill it with your data. Finally you simply
+call regulatory_hint() with the regulatory domain structure in it.
+
+Bellow is a simple example, with a regulatory domain cached using the stack.
+Your implementation may vary (read EEPROM cache instead, for example).
+
+Example cache of some regulatory domain
+
+struct ieee80211_regdomain mydriver_jp_regdom = {
+	.n_reg_rules = 3,
+	.alpha2 =  "JP",
+	//.alpha2 =  "99", /* If I have no alpha2 to map it to */
+	.reg_rules = {
+		/* IEEE 802.11b/g, channels 1..14 */
+		REG_RULE(2412-20, 2484+20, 40, 6, 20, 0),
+		/* IEEE 802.11a, channels 34..48 */
+		REG_RULE(5170-20, 5240+20, 40, 6, 20,
+			NL80211_RRF_PASSIVE_SCAN),
+		/* IEEE 802.11a, channels 52..64 */
+		REG_RULE(5260-20, 5320+20, 40, 6, 20,
+			NL80211_RRF_NO_IBSS |
+			NL80211_RRF_DFS),
+	}
+};
+
+Then in some part of your code after your wiphy has been registered:
+
+	int r;
+	struct ieee80211_regdomain *rd;
+	int size_of_regd;
+	int num_rules = mydriver_jp_regdom.n_reg_rules;
+	unsigned int i;
+
+	size_of_regd = sizeof(struct ieee80211_regdomain) +
+		(num_rules * sizeof(struct ieee80211_reg_rule));
+
+	rd = kzalloc(size_of_regd, GFP_KERNEL);
+	if (!rd)
+	return -ENOMEM;
+
+	memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain));
+
+	for (i=0; i < num_rules; i++) {
+		memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i],
+			sizeof(struct ieee80211_reg_rule));
+	}
+	r = regulatory_hint(hw->wiphy, NULL, rd);
+	if (r) {
+		kfree(rd);
+		return r;
+	}
+
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 6fcb3060dec..b65f0799df4 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -341,6 +341,8 @@ key that does nothing by itself, as well as any hot key that is type-specific
 3.1 Guidelines for wireless device drivers
 ------------------------------------------
 
+(in this text, rfkill->foo means the foo field of struct rfkill).
+
 1. Each independent transmitter in a wireless device (usually there is only one
 transmitter per device) should have a SINGLE rfkill class attached to it.
 
@@ -363,10 +365,32 @@ This rule exists because users of the rfkill subsystem expect to get (and set,
 when possible) the overall transmitter rfkill state, not of a particular rfkill
 line.
 
-5. During suspend, the rfkill class will attempt to soft-block the radio
-through a call to rfkill->toggle_radio, and will try to restore its previous
-state during resume.  After a rfkill class is suspended, it will *not* call
-rfkill->toggle_radio until it is resumed.
+5. The wireless device driver MUST NOT leave the transmitter enabled during
+suspend and hibernation unless:
+
+	5.1. The transmitter has to be enabled for some sort of functionality
+	like wake-on-wireless-packet or autonomous packed forwarding in a mesh
+	network, and that functionality is enabled for this suspend/hibernation
+	cycle.
+
+AND
+
+	5.2. The device was not on a user-requested BLOCKED state before
+	the suspend (i.e. the driver must NOT unblock a device, not even
+	to support wake-on-wireless-packet or remain in the mesh).
+
+In other words, there is absolutely no allowed scenario where a driver can
+automatically take action to unblock a rfkill controller (obviously, this deals
+with scenarios where soft-blocking or both soft and hard blocking is happening.
+Scenarios where hardware rfkill lines are the only ones blocking the
+transmitter are outside of this rule, since the wireless device driver does not
+control its input hardware rfkill lines in the first place).
+
+6. During resume, rfkill will try to restore its previous state.
+
+7. After a rfkill class is suspended, it will *not* call rfkill->toggle_radio
+until it is resumed.
+
 
 Example of a WLAN wireless driver connected to the rfkill subsystem:
 --------------------------------------------------------------------