diff options
| author | Marek Szyprowski <m.szyprowski@samsung.com> | 2014-05-22 13:21:38 +0200 |
|---|---|---|
| committer | Marek Szyprowski <m.szyprowski@samsung.com> | 2014-07-14 02:28:22 -0700 |
| commit | d938474dbc2b34f464a06f19533f122060974599 (patch) | |
| tree | bcb4cae6962f46296200bf54a66dc5fc76df0ff9 /Documentation | |
| parent | eb5ddf016e2e489c74dfeff5eaac0557639fb460 (diff) | |
| download | linux-3.10-d938474dbc2b34f464a06f19533f122060974599.tar.gz linux-3.10-d938474dbc2b34f464a06f19533f122060974599.tar.bz2 linux-3.10-d938474dbc2b34f464a06f19533f122060974599.zip | |
usb: usb5303: add support for reference clock specified in device tree
USB3503 chip supports 8 values of reference clock. The value is
specified by REF_SEL[1:0] pins and INT_N line. This patch add support
for getting 'refclk' clock, enabling it and setting INT_N line according
to the value of the gathered clock. If no clock has been specified,
driver defaults to the old behaviour (assuming that clock has been
specified by REF_SEL pins from primary reference clock frequencies
table).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[merged to mainline as commit 657d898a9320a7cdb9b94565d75ecf75c25cbf0a]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: If36e36c671bb2ebc87ad39bfba5e30947e486c4a
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb3503.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index a018da4a7ad..221ac0dbc67 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -15,6 +15,14 @@ Optional properties: - reset-gpios: Should specify GPIO for reset. - initial-mode: Should specify initial mode. (1 for HUB mode, 2 for STANDBY mode) +- refclk: Clock used for driving REFCLK signal (optional, if not provided + the driver assumes that clock signal is always available, its + rate is specified by REF_SEL pins and a value from the primary + reference clock frequencies table is used) +- refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL + pins (optional, if not provided, driver will not set rate of the + REFCLK signal and assume that a value from the primary reference + clock frequencies table is used) Examples: usb3503@08 { |