diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/networking/dgrs.txt | |
download | linux-3.10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz linux-3.10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 linux-3.10-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/networking/dgrs.txt')
-rw-r--r-- | Documentation/networking/dgrs.txt | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/Documentation/networking/dgrs.txt b/Documentation/networking/dgrs.txt new file mode 100644 index 00000000000..1aa1bb3f94a --- /dev/null +++ b/Documentation/networking/dgrs.txt @@ -0,0 +1,52 @@ + The Digi International RightSwitch SE-X (dgrs) Device Driver + +This is a Linux driver for the Digi International RightSwitch SE-X +EISA and PCI boards. These are 4 (EISA) or 6 (PCI) port Ethernet +switches and a NIC combined into a single board. This driver can +be compiled into the kernel statically or as a loadable module. + +There is also a companion management tool, called "xrightswitch". +The management tool lets you watch the performance graphically, +as well as set the SNMP agent IP and IPX addresses, IEEE Spanning +Tree, and Aging time. These can also be set from the command line +when the driver is loaded. The driver command line options are: + + debug=NNN Debug printing level + dma=0/1 Disable/Enable DMA on PCI card + spantree=0/1 Disable/Enable IEEE spanning tree + hashexpire=NNN Change address aging time (default 300 seconds) + ipaddr=A,B,C,D Set SNMP agent IP address i.e. 199,86,8,221 + iptrap=A,B,C,D Set SNMP agent IP trap address i.e. 199,86,8,221 + ipxnet=NNN Set SNMP agent IPX network number + nicmode=0/1 Disable/Enable multiple NIC mode + +There is also a tool for setting up input and output packet filters +on each port, called "dgrsfilt". + +Both the management tool and the filtering tool are available +separately from the following FTP site: + + ftp://ftp.dgii.com/drivers/rightswitch/linux/ + +When nicmode=1, the board and driver operate as 4 or 6 individual +NIC ports (eth0...eth5) instead of as a switch. All switching +functions are disabled. In the future, the board firmware may include +a routing cache when in this mode. + +Copyright 1995-1996 Digi International Inc. + +This software may be used and distributed according to the terms +of the GNU General Public License, incorporated herein by reference. + +For information on purchasing a RightSwitch SE-4 or SE-6 +board, please contact Digi's sales department at 1-612-912-3444 +or 1-800-DIGIBRD. Outside the U.S., please check our Web page at: + + http://www.dgii.com + +for sales offices worldwide. Tech support is also available through +the channels listed on the Web site, although as long as I am +employed on networking products at Digi I will be happy to provide +any bug fixes that may be needed. + +-Rick Richardson, rick@dgii.com |