Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (88 commits)
  ips driver: make it less chatty
  intel_scu_ipc: fix size field for intel_scu_ipc_command
  intel_scu_ipc: return -EIO for error condition in busy_loop
  intel_scu_ipc: fix data packing of PMIC command on Moorestown
  Clean up command packing on MRST.
  zero the stack buffer before giving random garbage to the SCU
  Fix stack buffer size for IPC writev messages
  intel_scu_ipc: Use the new cpu identification function
  intel_scu_ipc: tidy up unused bits
  Remove indirect read write api support.
  intel_scu_ipc: Support Medfield processors
  intel_scu_ipc: detect CPU type automatically
  x86 plat: limit x86 platform driver menu to X86
  acpi ec_sys: Be more cautious about ec write access
  acpi ec: Fix possible double io port registration
  hp-wmi: acpi_drivers.h is already included through acpi.h two lines below
  hp-wmi: Fix mixing up of and/or directive
  dell-laptop: make dell_laptop_i8042_filter() static
  asus-laptop: fix asus_input_init error path
  msi-wmi: make needlessly global symbols static
  ...

43 files changed, 3830 insertions, 743 deletions

diff --git a/Documentation/ABI/testing/debugfs-ec b/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 00000000000..6546115a94d
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date:		July 2010
+Contact:	Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index fc15538d8b4..f6f80257add 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -960,70 +960,21 @@ Sysfs notes:
 	subsystem, and follow all of the hwmon guidelines at
 	Documentation/hwmon.
 
+EXPERIMENTAL: Embedded controller register dump
+-----------------------------------------------
 
-EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
-------------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
-This feature dumps the values of 256 embedded controller
-registers. Values which have changed since the last time the registers
-were dumped are marked with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
-EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
-EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
-EC 0x30:  01  07  1a  00  30  04  00  00 *85  00  00  10  00  50  00  00
-EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
-EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03 *bc *02 *bc
-EC 0x60: *02 *bc *02  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0x70:  00  00  00  00  00  12  30  40 *24 *26 *2c *27 *20  80 *1f  80
-EC 0x80:  00  00  00  06 *37 *0e  03  00  00  00  0e  07  00  00  00  00
-EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xa0: *ff  09  ff  09  ff  ff *64  00 *00 *00 *a2  41 *ff *ff *e0  00
-EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
-EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
-
-This feature can be used to determine the register holding the fan
-speed on some models. To do that, do the following:
+This feature is not included in the thinkpad driver anymore.
+Instead the EC can be accessed through /sys/kernel/debug/ec with
+a userspace tool which can be found here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec
 
+Use it to determine the register holding the fan
+speed on some models. To do that, do the following:
 	- make sure the battery is fully charged
 	- make sure the fan is running
-	- run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
-
-The first step makes sure various charging-related values don't
-vary. The second ensures that the fan-related values do vary, since
-the fan speed fluctuates a bit. The third will (hopefully) mark the
-fan register with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
-EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
-EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
-EC 0x30:  01  07  1a  00  30  04  00  00  85  00  00  10  00  50  00  00
-EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
-EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03  bc  02  bc
-EC 0x60:  02  bc  02  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0x70:  00  00  00  00  00  12  30  40  24  27  2c  27  21  80  1f  80
-EC 0x80:  00  00  00  06 *be  0d  03  00  00  00  0e  07  00  00  00  00
-EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xa0:  ff  09  ff  09  ff  ff  64  00  00  00  a2  41  ff  ff  e0  00
-EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
-EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
-
-Another set of values that varies often is the temperature
+	- use above mentioned tool to read out the EC
+
+Often fan and temperature values vary between
 readings. Since temperatures don't change vary fast, you can take
 several quick dumps to eliminate them.
 
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 4470c9ad4a3..29f66793cc5 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -1,6 +1,12 @@
 #ifndef _ASM_X86_INTEL_SCU_IPC_H_
 #define  _ASM_X86_INTEL_SCU_IPC_H_
 
+#define IPCMSG_VRTC	0xFA	 /* Set vRTC device */
+
+/* Command id associated with message IPCMSG_VRTC */
+#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
+#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
+
 /* Read single register */
 int intel_scu_ipc_ioread8(u16 addr, u8 *data);
 
@@ -28,20 +34,6 @@ int intel_scu_ipc_writev(u16 *addr, u8 *data, int len);
 /* Update single register based on the mask */
 int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask);
 
-/*
- * Indirect register read
- * Can be used when SCCB(System Controller Configuration Block) register
- * HRIM(Honor Restricted IPC Messages) is set (bit 23)
- */
-int intel_scu_ipc_register_read(u32 addr, u32 *data);
-
-/*
- * Indirect register write
- * Can be used when SCCB(System Controller Configuration Block) register
- * HRIM(Honor Restricted IPC Messages) is set (bit 23)
- */
-int intel_scu_ipc_register_write(u32 addr, u32 data);
-
 /* Issue commands to the SCU with or without data */
 int intel_scu_ipc_simple_command(int cmd, int sub);
 int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 74641151880..08e0140920e 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -104,6 +104,24 @@ config ACPI_SYSFS_POWER
 	help
 	  Say N to disable power /sys interface
 
+config ACPI_EC_DEBUGFS
+	tristate "EC read/write access through /sys/kernel/debug/ec"
+	default n
+	help
+	  Say N to disable Embedded Controller /sys/kernel/debug interface
+
+	  Be aware that using this interface can confuse your Embedded
+	  Controller in a way that a normal reboot is not enough. You then
+	  have to power of your system, and remove the laptop battery for
+	  some seconds.
+	  An Embedded Controller typically is available on laptops and reads
+	  sensor values like battery state and temperature.
+	  The kernel accesses the EC through ACPI parsed code provided by BIOS
+	  tables. This option allows to access the EC directly without ACPI
+	  code being involved.
+	  Thus this option is a debug option that helps to write ACPI drivers
+	  and can be used to identify ACPI code or EC firmware bugs.
+
 config ACPI_PROC_EVENT
 	bool "Deprecated /proc/acpi/event support"
 	depends on PROC_FS
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 6ee33169e1d..833b582d176 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ACPI_SBS)		+= sbshc.o
 obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_POWER_METER)	+= power_meter.o
 obj-$(CONFIG_ACPI_HED)		+= hed.o
+obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 5f2027d782e..1fa0aafebe2 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -34,8 +34,6 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -45,10 +43,13 @@
 #include <acpi/acpi_drivers.h>
 #include <linux/dmi.h>
 
+#include "internal.h"
+
 #define ACPI_EC_CLASS			"embedded_controller"
 #define ACPI_EC_DEVICE_NAME		"Embedded Controller"
 #define ACPI_EC_FILE_INFO		"info"
 
+#undef PREFIX
 #define PREFIX				"ACPI: EC: "
 
 /* EC status register */
@@ -106,19 +107,8 @@ struct transaction {
 	bool done;
 };
 
-static struct acpi_ec {
-	acpi_handle handle;
-	unsigned long gpe;
-	unsigned long command_addr;
-	unsigned long data_addr;
-	unsigned long global_lock;
-	unsigned long flags;
-	struct mutex lock;
-	wait_queue_head_t wait;
-	struct list_head list;
-	struct transaction *curr;
-	spinlock_t curr_lock;
-} *boot_ec, *first_ec;
+struct acpi_ec *boot_ec, *first_ec;
+EXPORT_SYMBOL(first_ec);
 
 static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
 static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
@@ -679,72 +669,6 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 }
 
 /* --------------------------------------------------------------------------
-                              FS Interface (/proc)
-   -------------------------------------------------------------------------- */
-
-static struct proc_dir_entry *acpi_ec_dir;
-
-static int acpi_ec_read_info(struct seq_file *seq, void *offset)
-{
-	struct acpi_ec *ec = seq->private;
-
-	if (!ec)
-		goto end;
-
-	seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe);
-	seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n",
-		   (unsigned)ec->command_addr, (unsigned)ec->data_addr);
-	seq_printf(seq, "use global lock:\t%s\n",
-		   ec->global_lock ? "yes" : "no");
-      end:
-	return 0;
-}
-
-static int acpi_ec_info_open_fs(struct inode *inode, struct file *file)
-{
-	return single_open(file, acpi_ec_read_info, PDE(inode)->data);
-}
-
-static const struct file_operations acpi_ec_info_ops = {
-	.open = acpi_ec_info_open_fs,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-	.owner = THIS_MODULE,
-};
-
-static int acpi_ec_add_fs(struct acpi_device *device)
-{
-	struct proc_dir_entry *entry = NULL;
-
-	if (!acpi_device_dir(device)) {
-		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
-						     acpi_ec_dir);
-		if (!acpi_device_dir(device))
-			return -ENODEV;
-	}
-
-	entry = proc_create_data(ACPI_EC_FILE_INFO, S_IRUGO,
-				 acpi_device_dir(device),
-				 &acpi_ec_info_ops, acpi_driver_data(device));
-	if (!entry)
-		return -ENODEV;
-	return 0;
-}
-
-static int acpi_ec_remove_fs(struct acpi_device *device)
-{
-
-	if (acpi_device_dir(device)) {
-		remove_proc_entry(ACPI_EC_FILE_INFO, acpi_device_dir(device));
-		remove_proc_entry(acpi_device_bid(device), acpi_ec_dir);
-		acpi_device_dir(device) = NULL;
-	}
-
-	return 0;
-}
-
-/* --------------------------------------------------------------------------
                                Driver Interface
    -------------------------------------------------------------------------- */
 static acpi_status
@@ -894,7 +818,12 @@ static int acpi_ec_add(struct acpi_device *device)
 	if (!first_ec)
 		first_ec = ec;
 	device->driver_data = ec;
-	acpi_ec_add_fs(device);
+
+	WARN(!request_region(ec->data_addr, 1, "EC data"),
+	     "Could not request EC data io port 0x%lx", ec->data_addr);
+	WARN(!request_region(ec->command_addr, 1, "EC cmd"),
+	     "Could not request EC cmd io port 0x%lx", ec->command_addr);
+
 	pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
 			  ec->gpe, ec->command_addr, ec->data_addr);
 
@@ -921,7 +850,8 @@ static int acpi_ec_remove(struct acpi_device *device, int type)
 		kfree(handler);
 	}
 	mutex_unlock(&ec->lock);
-	acpi_ec_remove_fs(device);
+	release_region(ec->data_addr, 1);
+	release_region(ec->command_addr, 1);
 	device->driver_data = NULL;
 	if (ec == first_ec)
 		first_ec = NULL;
@@ -1120,16 +1050,10 @@ int __init acpi_ec_init(void)
 {
 	int result = 0;
 
-	acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir);
-	if (!acpi_ec_dir)
-		return -ENODEV;
-
 	/* Now register the driver for the EC */
 	result = acpi_bus_register_driver(&acpi_ec_driver);
-	if (result < 0) {
-		remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir);
+	if (result < 0)
 		return -ENODEV;
-	}
 
 	return result;
 }
@@ -1140,9 +1064,6 @@ static void __exit acpi_ec_exit(void)
 {
 
 	acpi_bus_unregister_driver(&acpi_ec_driver);
-
-	remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir);
-
 	return;
 }
 #endif	/* 0 */
diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c
new file mode 100644
index 00000000000..0e869b3f81c
--- /dev/null
+++ b/drivers/acpi/ec_sys.c
@@ -0,0 +1,160 @@
+/*
+ * ec_sys.c
+ *
+ * Copyright (C) 2010 SUSE Products GmbH/Novell
+ * Author:
+ *      Thomas Renninger <trenn@suse.de>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/debugfs.h>
+#include "internal.h"
+
+MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
+MODULE_DESCRIPTION("ACPI EC sysfs access driver");
+MODULE_LICENSE("GPL");
+
+static bool write_support;
+module_param(write_support, bool, 0644);
+MODULE_PARM_DESC(write_support, "Dangerous, reboot and removal of battery may "
+		 "be needed.");
+
+#define EC_SPACE_SIZE 256
+
+struct sysdev_class acpi_ec_sysdev_class = {
+	.name = "ec",
+};
+
+static struct dentry *acpi_ec_debugfs_dir;
+
+static int acpi_ec_open_io(struct inode *i, struct file *f)
+{
+	f->private_data = i->i_private;
+	return 0;
+}
+
+static ssize_t acpi_ec_read_io(struct file *f, char __user *buf,
+			       size_t count, loff_t *off)
+{
+	/* Use this if support reading/writing multiple ECs exists in ec.c:
+	 * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private;
+	 */
+	unsigned int size = EC_SPACE_SIZE;
+	u8 *data = (u8 *) buf;
+	loff_t init_off = *off;
+	int err = 0;
+
+	if (*off >= size)
+		return 0;
+	if (*off + count >= size) {
+		size -= *off;
+		count = size;
+	} else
+		size = count;
+
+	while (size) {
+		err = ec_read(*off, &data[*off - init_off]);
+		if (err)
+			return err;
+		*off += 1;
+		size--;
+	}
+	return count;
+}
+
+static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf,
+				size_t count, loff_t *off)
+{
+	/* Use this if support reading/writing multiple ECs exists in ec.c:
+	 * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private;
+	 */
+
+	unsigned int size = count;
+	loff_t init_off = *off;
+	u8 *data = (u8 *) buf;
+	int err = 0;
+
+	if (*off >= EC_SPACE_SIZE)
+		return 0;
+	if (*off + count >= EC_SPACE_SIZE) {
+		size = EC_SPACE_SIZE - *off;
+		count = size;
+	}
+
+	while (size) {
+		u8 byte_write = data[*off - init_off];
+		err = ec_write(*off, byte_write);
+		if (err)
+			return err;
+
+		*off += 1;
+		size--;
+	}
+	return count;
+}
+
+static struct file_operations acpi_ec_io_ops = {
+	.owner = THIS_MODULE,
+	.open  = acpi_ec_open_io,
+	.read  = acpi_ec_read_io,
+	.write = acpi_ec_write_io,
+};
+
+int acpi_ec_add_debugfs(struct acpi_ec *ec, unsigned int ec_device_count)
+{
+	struct dentry *dev_dir;
+	char name[64];
+	mode_t mode = 0400;
+
+	if (ec_device_count == 0) {
+		acpi_ec_debugfs_dir = debugfs_create_dir("ec", NULL);
+		if (!acpi_ec_debugfs_dir)
+			return -ENOMEM;
+	}
+
+	sprintf(name, "ec%u", ec_device_count);
+	dev_dir = debugfs_create_dir(name, acpi_ec_debugfs_dir);
+	if (!dev_dir) {
+		if (ec_device_count != 0)
+			goto error;
+		return -ENOMEM;
+	}
+
+	if (!debugfs_create_x32("gpe", 0444, dev_dir, (u32 *)&first_ec->gpe))
+		goto error;
+	if (!debugfs_create_bool("use_global_lock", 0444, dev_dir,
+				 (u32 *)&first_ec->global_lock))
+		goto error;
+
+	if (write_support)
+		mode = 0600;
+	if (!debugfs_create_file("io", mode, dev_dir, ec, &acpi_ec_io_ops))
+		goto error;
+
+	return 0;
+
+error:
+	debugfs_remove_recursive(acpi_ec_debugfs_dir);
+	return -ENOMEM;
+}
+
+static int __init acpi_ec_sys_init(void)
+{
+	int err = 0;
+	if (first_ec)
+		err = acpi_ec_add_debugfs(first_ec, 0);
+	else
+		err = -ENODEV;
+	return err;
+}
+
+static void __exit acpi_ec_sys_exit(void)
+{
+	debugfs_remove_recursive(acpi_ec_debugfs_dir);
+}
+
+module_init(acpi_ec_sys_init);
+module_exit(acpi_ec_sys_exit);
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index f8f190ec066..8ae27264a00 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -18,6 +18,11 @@
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
 
+#ifndef _ACPI_INTERNAL_H_
+#define _ACPI_INTERNAL_H_
+
+#include <linux/sysdev.h>
+
 #define PREFIX "ACPI: "
 
 int init_acpi_device_notify(void);
@@ -46,6 +51,23 @@ void acpi_early_processor_set_pdc(void);
 /* --------------------------------------------------------------------------
                                   Embedded Controller
    -------------------------------------------------------------------------- */
+struct acpi_ec {
+	acpi_handle handle;
+	unsigned long gpe;
+	unsigned long command_addr;
+	unsigned long data_addr;
+	unsigned long global_lock;
+	unsigned long flags;
+	struct mutex lock;
+	wait_queue_head_t wait;
+	struct list_head list;
+	struct transaction *curr;
+	spinlock_t curr_lock;
+	struct sys_device sysdev;
+};
+
+extern struct acpi_ec *first_ec;
+
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
 int acpi_boot_ec_enable(void);
@@ -63,3 +85,5 @@ int acpi_sleep_proc_init(void);
 #else
 static inline int acpi_sleep_proc_init(void) { return 0; }
 #endif
+
+#endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 3e1b8a28871..79baa6368f7 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -5,6 +5,7 @@
 menuconfig X86_PLATFORM_DEVICES
 	bool "X86 Platform Specific Device Drivers"
 	default y
+	depends on X86
 	---help---
 	  Say Y here to get to see options for device drivers for various
 	  x86 platforms, including vendor-specific laptop extension drivers.
@@ -151,6 +152,7 @@ config MSI_LAPTOP
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on SERIO_I8042
 	---help---
 	  This is a driver for laptops built by MSI (MICRO-STAR
 	  INTERNATIONAL):
@@ -181,6 +183,8 @@ config COMPAL_LAPTOP
 	depends on ACPI
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL
+	depends on HWMON
+	depends on POWER_SUPPLY
 	---help---
 	  This is a driver for laptops built by Compal:
 
@@ -520,6 +524,7 @@ config TOSHIBA_BT_RFKILL
 config ACPI_CMPC
 	tristate "CMPC Laptop Extras"
 	depends on X86 && ACPI
+	depends on RFKILL || RFKILL=n
 	select INPUT
 	select BACKLIGHT_CLASS_DEVICE
 	default n
@@ -537,4 +542,43 @@ config INTEL_SCU_IPC
 	  some embedded Intel x86 platforms. This is not needed for PC-type
 	  machines.
 
+config GPIO_INTEL_PMIC
+	bool "Intel PMIC GPIO support"
+	depends on INTEL_SCU_IPC && GPIOLIB
+	---help---
+	  Say Y here to support GPIO via the SCU IPC interface
+	  on Intel MID platforms.
+
+config RAR_REGISTER
+	bool "Restricted Access Region Register Driver"
+	depends on PCI && X86_MRST
+	default n
+	---help---
+	  This driver allows other kernel drivers access to the
+	  contents of the restricted access region control registers.
+
+	  The restricted access region control registers
+	  (rar_registers) are used to pass address and
+	  locking information on restricted access regions
+	  to other drivers that use restricted access regions.
+
+	  The restricted access regions are regions of memory
+	  on the Intel MID Platform that are not accessible to
+	  the x86 processor, but are accessible to dedicated
+	  processors on board peripheral devices.
+
+	  The purpose of the restricted access regions is to
+	  protect sensitive data from compromise by unauthorized
+	  programs running on the x86 processor.
+
+config INTEL_IPS
+	tristate "Intel Intelligent Power Sharing"
+	depends on ACPI
+	---help---
+	  Intel Calpella platforms support dynamic power sharing between the
+	  CPU and GPU, maximizing performance in a given TDP.  This driver,
+	  along with the CPU frequency and i915 drivers, provides that
+	  functionality.  If in doubt, say Y here; it will only load on
+	  supported platforms.
+
 endif # X86_PLATFORM_DEVICES
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 8770bfe7143..4744c7744ff 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -26,3 +26,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
 obj-$(CONFIG_INTEL_SCU_IPC)	+= intel_scu_ipc.o
+obj-$(CONFIG_RAR_REGISTER)	+= intel_rar_register.o
+obj-$(CONFIG_INTEL_IPS)		+= intel_ips.o
+obj-$(CONFIG_GPIO_INTEL_PMIC)	+= intel_pmic_gpio.o
+
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 1ea6c434d33..2badee2fdee 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -50,17 +50,6 @@ MODULE_LICENSE("GPL");
 #define ACER_INFO KERN_INFO ACER_LOGPREFIX
 
 /*
- * The following defines quirks to get some specific functions to work
- * which are known to not be supported over ACPI-WMI (such as the mail LED
- * on WMID based Acer's)
- */
-struct acer_quirks {
-	const char *vendor;
-	const char *model;
-	u16 quirks;
-};
-
-/*
  * Magic Number
  * Meaning is unknown - this number is required for writing to ACPI for AMW0
  * (it's also used in acerhk when directly accessing the BIOS)
@@ -200,7 +189,7 @@ static void set_quirks(void)
 static int dmi_matched(const struct dmi_system_id *dmi)
 {
 	quirks = dmi->driver_data;
-	return 0;
+	return 1;
 }
 
 static struct quirk_entry quirk_unknown = {
@@ -555,6 +544,7 @@ static acpi_status AMW0_find_mailled(void)
 	obj->buffer.length == sizeof(struct wmab_ret)) {
 		ret = *((struct wmab_ret *) obj->buffer.pointer);
 	} else {
+		kfree(out.pointer);
 		return AE_ERROR;
 	}
 
@@ -570,7 +560,7 @@ static acpi_status AMW0_set_capabilities(void)
 {
 	struct wmab_args args;
 	struct wmab_ret ret;
-	acpi_status status = AE_OK;
+	acpi_status status;
 	struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
 
@@ -593,12 +583,13 @@ static acpi_status AMW0_set_capabilities(void)
 	if (ACPI_FAILURE(status))
 		return status;
 
-	obj = (union acpi_object *) out.pointer;
+	obj = out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
 	obj->buffer.length == sizeof(struct wmab_ret)) {
 		ret = *((struct wmab_ret *) obj->buffer.pointer);
 	} else {
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto out;
 	}
 
 	if (ret.eax & 0x1)
@@ -607,23 +598,26 @@ static acpi_status AMW0_set_capabilities(void)
 	args.ebx = 2 << 8;
 	args.ebx |= ACER_AMW0_BLUETOOTH_MASK;
 
+	/*
+	 * It's ok to use existing buffer for next wmab_execute call.
+	 * But we need to kfree(out.pointer) if next wmab_execute fail.
+	 */
 	status = wmab_execute(&args, &out);
 	if (ACPI_FAILURE(status))
-		return status;
+		goto out;
 
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER
 	&& obj->buffer.length == sizeof(struct wmab_ret)) {
 		ret = *((struct wmab_ret *) obj->buffer.pointer);
 	} else {
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto out;
 	}
 
 	if (ret.eax & 0x1)
 		interface->capability |= ACER_CAP_BLUETOOTH;
 
-	kfree(out.pointer);
-
 	/*
 	 * This appears to be safe to enable, since all Wistron based laptops
 	 * appear to use the same EC register for brightness, even if they
@@ -632,7 +626,10 @@ static acpi_status AMW0_set_capabilities(void)
 	if (quirks->brightness >= 0)
 		interface->capability |= ACER_CAP_BRIGHTNESS;
 
-	return AE_OK;
+	status = AE_OK;
+out:
+	kfree(out.pointer);
+	return status;
 }
 
 static struct wmi_interface AMW0_interface = {
@@ -772,6 +769,7 @@ static acpi_status WMID_set_capabilities(void)
 		obj->buffer.length == sizeof(u32)) {
 		devices = *((u32 *) obj->buffer.pointer);
 	} else {
+		kfree(out.pointer);
 		return AE_ERROR;
 	}
 
@@ -788,6 +786,7 @@ static acpi_status WMID_set_capabilities(void)
 	if (!(devices & 0x20))
 		max_brightness = 0x9;
 
+	kfree(out.pointer);
 	return status;
 }
 
@@ -1084,8 +1083,7 @@ static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
 	}
 }
 
-static DEVICE_ATTR(interface, S_IWUGO | S_IRUGO | S_IWUSR,
-	show_interface, NULL);
+static DEVICE_ATTR(interface, S_IRUGO, show_interface, NULL);
 
 /*
  * debugfs functions
@@ -1095,6 +1093,7 @@ static u32 get_wmid_devices(void)
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object *obj;
 	acpi_status status;
+	u32 devices = 0;
 
 	status = wmi_query_block(WMID_GUID2, 1, &out);
 	if (ACPI_FAILURE(status))
@@ -1103,10 +1102,11 @@ static u32 get_wmid_devices(void)
 	obj = (union acpi_object *) out.pointer;
 	if (obj && obj->type == ACPI_TYPE_BUFFER &&
 		obj->buffer.length == sizeof(u32)) {
-		return *((u32 *) obj->buffer.pointer);
-	} else {
-		return 0;
+		devices = *((u32 *) obj->buffer.pointer);
 	}
+
+	kfree(out.pointer);
+	return devices;
 }
 
 /*
@@ -1327,22 +1327,31 @@ static int __init acer_wmi_init(void)
 		       "generic video driver\n");
 	}
 
-	if (platform_driver_register(&acer_platform_driver)) {
+	err = platform_driver_register(&acer_platform_driver);
+	if (err) {
 		printk(ACER_ERR "Unable to register platform driver.\n");
 		goto error_platform_register;
 	}
+
 	acer_platform_device = platform_device_alloc("acer-wmi", -1);
-	platform_device_add(acer_platform_device);
+	if (!acer_platform_device) {
+		err = -ENOMEM;
+		goto error_device_alloc;
+	}
+
+	err = platform_device_add(acer_platform_device);
+	if (err)
+		goto error_device_add;
 
 	err = create_sysfs();
 	if (err)
-		return err;
+		goto error_create_sys;
 
 	if (wmi_has_guid(WMID_GUID2)) {
 		interface->debug.wmid_devices = get_wmid_devices();
 		err = create_debugfs();
 		if (err)
-			return err;
+			goto error_create_debugfs;
 	}
 
 	/* Override any initial settings with values from the commandline */
@@ -1350,15 +1359,23 @@ static int __init acer_wmi_init(void)
 
 	return 0;
 
+error_create_debugfs:
+	remove_sysfs(acer_platform_device);
+error_create_sys:
+	platform_device_del(acer_platform_device);
+error_device_add:
+	platform_device_put(acer_platform_device);
+error_device_alloc:
+	platform_driver_unregister(&acer_platform_driver);
 error_platform_register:
-	return -ENODEV;
+	return err;
 }
 
 static void __exit acer_wmi_exit(void)
 {
 	remove_sysfs(acer_platform_device);
 	remove_debugfs();
-	platform_device_del(acer_platform_device);
+	platform_device_unregister(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
 
 	printk(ACER_INFO "Acer Laptop WMI Extras unloaded\n");
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 7b2384d674d..60f9cfcac93 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -52,7 +52,7 @@
  */
 #undef START_IN_KERNEL_MODE
 
-#define DRV_VER "0.5.22"
+#define DRV_VER "0.5.24"
 
 /*
  * According to the Atom N270 datasheet,
@@ -92,9 +92,9 @@ static unsigned int fanstate = ACERHDF_FAN_AUTO;
 static char force_bios[16];
 static char force_product[16];
 static unsigned int prev_interval;
-struct thermal_zone_device *thz_dev;
-struct thermal_cooling_device *cl_dev;
-struct platform_device *acerhdf_dev;
+static struct thermal_zone_device *thz_dev;
+static struct thermal_cooling_device *cl_dev;
+static struct platform_device *acerhdf_dev;
 
 module_param(kernelmode, uint, 0);
 MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
@@ -112,14 +112,12 @@ module_param_string(force_product, force_product, 16, 0);
 MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check");
 
 /*
- * cmd_off: to switch the fan completely off
- * chk_off: to check if the fan is off
+ * cmd_off: to switch the fan completely off and check if the fan is off
  *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
  *		the fan speed depending on the temperature
  */
 struct fancmd {
 	u8 cmd_off;
-	u8 chk_off;
 	u8 cmd_auto;
 };
 
@@ -136,47 +134,81 @@ struct bios_settings_t {
 /* Register addresses and values for different BIOS versions */
 static const struct bios_settings_t bios_tbl[] = {
 	/* AOA110 */
-	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x1f, 0x00} },
-	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x1f, 0x00} },
-	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
-	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
 	/* AOA150 */
-	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} },
 	/* Acer 1410 */
-	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
 	/* Acer 1810xx */
-	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1810T", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1810T", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3308", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
+	{"Acer", "Aspire 1810T",  "v1.3310", 0x55, 0x58, {0x9e, 0x00} },
+	/* Acer 531 */
+	{"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00} },
 	/* Gateway */
-	{"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x10, 0x0f, 0x00} },
-	{"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x10, 0x0f, 0x00} },
-	{"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x10, 0x0f, 0x00} },
+	{"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+	{"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} },
+	{"Gateway", "LT31",   "v1.3103", 0x55, 0x58, {0x9e, 0x00} },
+	{"Gateway", "LT31",   "v1.3201", 0x55, 0x58, {0x9e, 0x00} },
+	{"Gateway", "LT31",   "v1.3302", 0x55, 0x58, {0x9e, 0x00} },
 	/* Packard Bell */
-	{"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x21, 0x00} },
-	{"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} },
-	{"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
-	{"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
+	{"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} },
+	{"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
+	{"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+	{"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
+	{"Packard Bell", "DOTMU",  "v1.3303", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3120", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3108", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3113", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3115", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3117", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v0.3119", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMU",  "v1.3204", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMA",  "v1.3201", 0x55, 0x58, {0x9e, 0x00} },
+	{"Packard Bell", "DOTMA",  "v1.3302", 0x55, 0x58, {0x9e, 0x00} },
 	/* pewpew-terminator */
-	{"", "", "", 0, 0, {0, 0, 0} }
+	{"", "", "", 0, 0, {0, 0} }
 };
 
 static const struct bios_settings_t *bios_cfg __read_mostly;
@@ -200,7 +232,7 @@ static int acerhdf_get_fanstate(int *state)
 	if (ec_read(bios_cfg->fanreg, &fan))
 		return -EINVAL;
 
-	if (fan != bios_cfg->cmd.chk_off)
+	if (fan != bios_cfg->cmd.cmd_off)
 		*state = ACERHDF_FAN_AUTO;
 	else
 		*state = ACERHDF_FAN_OFF;
@@ -374,7 +406,7 @@ static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
 }
 
 /* bind callback functions to thermalzone */
-struct thermal_zone_device_ops acerhdf_dev_ops = {
+static struct thermal_zone_device_ops acerhdf_dev_ops = {
 	.bind = acerhdf_bind,
 	.unbind = acerhdf_unbind,
 	.get_temp = acerhdf_get_ec_temp,
@@ -449,7 +481,7 @@ err_out:
 }
 
 /* bind fan callbacks to fan device */
-struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+static struct thermal_cooling_device_ops acerhdf_cooling_ops = {
 	.get_max_state = acerhdf_get_max_state,
 	.get_cur_state = acerhdf_get_cur_state,
 	.set_cur_state = acerhdf_set_cur_state,
@@ -518,6 +550,10 @@ static int acerhdf_check_hardware(void)
 	version = dmi_get_system_info(DMI_BIOS_VERSION);
 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
 
+	if (!vendor || !version || !product) {
+		pr_err("error getting hardware information\n");
+		return -EINVAL;
+	}
 
 	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
 
@@ -579,17 +615,26 @@ static int acerhdf_register_platform(void)
 		return err;
 
 	acerhdf_dev = platform_device_alloc("acerhdf", -1);
-	platform_device_add(acerhdf_dev);
+	if (!acerhdf_dev) {
+		err = -ENOMEM;
+		goto err_device_alloc;
+	}
+	err = platform_device_add(acerhdf_dev);
+	if (err)
+		goto err_device_add;
 
 	return 0;
+
+err_device_add:
+	platform_device_put(acerhdf_dev);
+err_device_alloc:
+	platform_driver_unregister(&acerhdf_driver);
+	return err;
 }
 
 static void acerhdf_unregister_platform(void)
 {
-	if (!acerhdf_dev)
-		return;
-
-	platform_device_del(acerhdf_dev);
+	platform_device_unregister(acerhdf_dev);
 	platform_driver_unregister(&acerhdf_driver);
 }
 
@@ -633,7 +678,7 @@ static int __init acerhdf_init(void)
 
 	err = acerhdf_register_platform();
 	if (err)
-		goto err_unreg;
+		goto out_err;
 
 	err = acerhdf_register_thermal();
 	if (err)
@@ -646,7 +691,7 @@ err_unreg:
 	acerhdf_unregister_platform();
 
 out_err:
-	return -ENODEV;
+	return err;
 }
 
 static void __exit acerhdf_exit(void)
@@ -662,11 +707,13 @@ MODULE_DESCRIPTION("Aspire One temperature and fan driver");
 MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:");
 MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1410*:");
 MODULE_ALIAS("dmi:*:*Acer*:pnAspire 1810*:");
+MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:");
 MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:");
 MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:");
 MODULE_ALIAS("dmi:*:*Packard Bell*:pnAOA*:");
 MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOA*:");
 MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMU*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:pnDOTMA*:");
 
 module_init(acerhdf_init);
 module_exit(acerhdf_exit);
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index efe8f638890..b756e07d41b 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -76,18 +76,18 @@ MODULE_LICENSE("GPL");
  * So, if something doesn't work as you want, just try other values =)
  */
 static uint wapf = 1;
-module_param(wapf, uint, 0644);
+module_param(wapf, uint, 0444);
 MODULE_PARM_DESC(wapf, "WAPF value");
 
 static int wlan_status = 1;
 static int bluetooth_status = 1;
 
-module_param(wlan_status, int, 0644);
+module_param(wlan_status, int, 0444);
 MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
 		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
 		 "default is 1");
 
-module_param(bluetooth_status, int, 0644);
+module_param(bluetooth_status, int, 0444);
 MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
 		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
 		 "default is 1");
@@ -297,7 +297,7 @@ static int write_acpi_int_ret(acpi_handle handle, const char *method, int val,
 	acpi_status status;
 
 	if (!handle)
-		return 0;
+		return -1;
 
 	params.count = 1;
 	params.pointer = &in_obj;
@@ -796,10 +796,11 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
 
 	rv = parse_arg(buf, count, &value);
 	if (rv > 0) {
-		if (write_acpi_int(asus->handle, METHOD_LEDD, value))
+		if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
 			pr_warning("LED display write failed\n");
-		else
-			asus->ledd_status = (u32) value;
+			return -ENODEV;
+		}
+		asus->ledd_status = (u32) value;
 	}
 	return rv;
 }
@@ -1123,7 +1124,7 @@ static int asus_input_init(struct asus_laptop *asus)
 	input = input_allocate_device();
 	if (!input) {
 		pr_info("Unable to allocate input device\n");
-		return 0;
+		return -ENOMEM;
 	}
 	input->name = "Asus Laptop extra buttons";
 	input->phys = ASUS_LAPTOP_FILE "/input0";
@@ -1134,20 +1135,20 @@ static int asus_input_init(struct asus_laptop *asus)
 	error = sparse_keymap_setup(input, asus_keymap, NULL);
 	if (error) {
 		pr_err("Unable to setup input device keymap\n");
-		goto err_keymap;
+		goto err_free_dev;
 	}
 	error = input_register_device(input);
 	if (error) {
 		pr_info("Unable to register input device\n");
-		goto err_device;
+		goto err_free_keymap;
 	}
 
 	asus->inputdev = input;
 	return 0;
 
-err_keymap:
+err_free_keymap:
 	sparse_keymap_free(input);
-err_device:
+err_free_dev:
 	input_free_device(input);
 	return error;
 }
@@ -1397,8 +1398,10 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 		}
 	}
 	asus->name = kstrdup(string, GFP_KERNEL);
-	if (!asus->name)
+	if (!asus->name) {
+		kfree(buffer.pointer);
 		return -ENOMEM;
+	}
 
 	if (*string)
 		pr_notice("  %s model detected\n", string);
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index 92fd30c9379..e058c2ba2a1 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1330,6 +1330,9 @@ static int asus_hotk_get_info(void)
 			hotk->model = P30;
 			printk(KERN_NOTICE
 			       "  Samsung P30 detected, supported\n");
+			hotk->methods = &model_conf[hotk->model];
+			kfree(model);
+			return 0;
 		} else {
 			hotk->model = M2E;
 			printk(KERN_NOTICE "  unsupported model %s, trying "
@@ -1339,8 +1342,6 @@ static int asus_hotk_get_info(void)
 			kfree(model);
 			return -ENODEV;
 		}
-		hotk->methods = &model_conf[hotk->model];
-		return AE_OK;
 	}
 	hotk->methods = &model_conf[hotk->model];
 	printk(KERN_NOTICE "  %s model detected, supported\n", string);
@@ -1374,7 +1375,7 @@ static int asus_hotk_get_info(void)
 
 	kfree(model);
 
-	return AE_OK;
+	return 0;
 }
 
 static int asus_hotk_check(void)
diff --git a/drivers/platform/x86/classmate-laptop.c b/drivers/platform/x86/classmate-laptop.c
index 3bf399fe2bb..341cbfef93e 100644
--- a/drivers/platform/x86/classmate-laptop.c
+++ b/drivers/platform/x86/classmate-laptop.c
@@ -208,7 +208,7 @@ static ssize_t cmpc_accel_sensitivity_store(struct device *dev,
 	return strnlen(buf, count);
 }
 
-struct device_attribute cmpc_accel_sensitivity_attr = {
+static struct device_attribute cmpc_accel_sensitivity_attr = {
 	.attr = { .name = "sensitivity", .mode = 0660 },
 	.show = cmpc_accel_sensitivity_show,
 	.store = cmpc_accel_sensitivity_store
@@ -573,16 +573,17 @@ static int cmpc_ipml_add(struct acpi_device *acpi)
 
 	ipml->rf = rfkill_alloc("cmpc_rfkill", &acpi->dev, RFKILL_TYPE_WLAN,
 				&cmpc_rfkill_ops, acpi->handle);
-	/* rfkill_alloc may fail if RFKILL is disabled. We should still work
-	 * anyway. */
-	if (!IS_ERR(ipml->rf)) {
+	/*
+	 * If RFKILL is disabled, rfkill_alloc will return ERR_PTR(-ENODEV).
+	 * This is OK, however, since all other uses of the device will not
+	 * derefence it.
+	 */
+	if (ipml->rf) {
 		retval = rfkill_register(ipml->rf);
 		if (retval) {
 			rfkill_destroy(ipml->rf);
 			ipml->rf = NULL;
 		}
-	} else {
-		ipml->rf = NULL;
 	}
 
 	dev_set_drvdata(&acpi->dev, ipml);
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index 71ff1545a93..d071ce05632 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -24,17 +24,50 @@
  */
 
 /*
- * comapl-laptop.c - Compal laptop support.
+ * compal-laptop.c - Compal laptop support.
+ *
+ * This driver exports a few files in /sys/devices/platform/compal-laptop/:
+ *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
+ *
+ * In addition to these platform device attributes the driver
+ * registers itself in the Linux backlight control, power_supply, rfkill
+ * and hwmon subsystem and is available to userspace under:
+ *
+ *   /sys/class/backlight/compal-laptop/
+ *   /sys/class/power_supply/compal-laptop/
+ *   /sys/class/rfkill/rfkillX/
+ *   /sys/class/hwmon/hwmonX/
+ *
+ * Notes on the power_supply battery interface:
+ *   - the "minimum" design voltage is *the* design voltage
+ *   - the ambient temperature is the average battery temperature
+ *     and the value is an educated guess (see commented code below)
  *
- * The driver registers itself with the rfkill subsystem and
- * the Linux backlight control subsystem.
  *
  * This driver might work on other laptops produced by Compal. If you
  * want to try it you can pass force=1 as argument to the module which
  * will force it to load even when the DMI data doesn't identify the
- * laptop as FL9x.
+ * laptop as compatible.
+ *
+ * Lots of data available at:
+ * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
+ * JHL90%20service%20manual-Final-0725.pdf
+ *
+ *
+ *
+ * Support for the Compal JHL90 added by Roald Frederickx
+ * (roald.frederickx@gmail.com):
+ * Driver got large revision. Added functionalities: backlight
+ * power, wake_on_XXX, a hwmon and power_supply interface.
+ *
+ * In case this gets merged into the kernel source: I want to dedicate this
+ * to Kasper Meerts, the awesome guy who showed me Linux and C!
  */
 
+/* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
+ * only enabled on a JHL90 board until it is verified that they work on the
+ * other boards too.  See the extra_features variable. */
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -43,71 +76,296 @@
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/power_supply.h>
+#include <linux/fb.h>
+
+
+/* ======= */
+/* Defines */
+/* ======= */
+#define DRIVER_NAME "compal-laptop"
+#define DRIVER_VERSION	"0.2.7"
+
+#define BACKLIGHT_LEVEL_ADDR		0xB9
+#define BACKLIGHT_LEVEL_MAX		7
+#define BACKLIGHT_STATE_ADDR		0x59
+#define BACKLIGHT_STATE_ON_DATA		0xE1
+#define BACKLIGHT_STATE_OFF_DATA	0xE2
+
+#define WAKE_UP_ADDR			0xA4
+#define WAKE_UP_PME			(1 << 0)
+#define WAKE_UP_MODEM			(1 << 1)
+#define WAKE_UP_LAN			(1 << 2)
+#define WAKE_UP_WLAN			(1 << 4)
+#define WAKE_UP_KEY			(1 << 6)
+#define WAKE_UP_MOUSE			(1 << 7)
+
+#define WIRELESS_ADDR			0xBB
+#define WIRELESS_WLAN			(1 << 0)
+#define WIRELESS_BT			(1 << 1)
+#define WIRELESS_WLAN_EXISTS		(1 << 2)
+#define WIRELESS_BT_EXISTS		(1 << 3)
+#define WIRELESS_KILLSWITCH		(1 << 4)
+
+#define PWM_ADDRESS			0x46
+#define PWM_DISABLE_ADDR		0x59
+#define PWM_DISABLE_DATA		0xA5
+#define PWM_ENABLE_ADDR			0x59
+#define PWM_ENABLE_DATA			0xA8
+
+#define FAN_ADDRESS			0x46
+#define FAN_DATA			0x81
+#define FAN_FULL_ON_CMD			0x59 /* Doesn't seem to work. Just */
+#define FAN_FULL_ON_ENABLE		0x76 /* force the pwm signal to its */
+#define FAN_FULL_ON_DISABLE		0x77 /* maximum value instead */
+
+#define TEMP_CPU			0xB0
+#define TEMP_CPU_LOCAL			0xB1
+#define TEMP_CPU_DTS			0xB5
+#define TEMP_NORTHBRIDGE		0xB6
+#define TEMP_VGA			0xB4
+#define TEMP_SKIN			0xB2
+
+#define BAT_MANUFACTURER_NAME_ADDR	0x10
+#define BAT_MANUFACTURER_NAME_LEN	9
+#define BAT_MODEL_NAME_ADDR		0x19
+#define BAT_MODEL_NAME_LEN		6
+#define BAT_SERIAL_NUMBER_ADDR		0xC4
+#define BAT_SERIAL_NUMBER_LEN		5
+#define BAT_CHARGE_NOW			0xC2
+#define BAT_CHARGE_DESIGN		0xCA
+#define BAT_VOLTAGE_NOW			0xC6
+#define BAT_VOLTAGE_DESIGN		0xC8
+#define BAT_CURRENT_NOW			0xD0
+#define BAT_CURRENT_AVG			0xD2
+#define BAT_POWER			0xD4
+#define BAT_CAPACITY			0xCE
+#define BAT_TEMP			0xD6
+#define BAT_TEMP_AVG			0xD7
+#define BAT_STATUS0			0xC1
+#define BAT_STATUS1			0xF0
+#define BAT_STATUS2			0xF1
+#define BAT_STOP_CHARGE1		0xF2
+#define BAT_STOP_CHARGE2		0xF3
+
+#define BAT_S0_DISCHARGE		(1 << 0)
+#define BAT_S0_DISCHRG_CRITICAL		(1 << 2)
+#define BAT_S0_LOW			(1 << 3)
+#define BAT_S0_CHARGING			(1 << 1)
+#define BAT_S0_AC			(1 << 7)
+#define BAT_S1_EXISTS			(1 << 0)
+#define BAT_S1_FULL			(1 << 1)
+#define BAT_S1_EMPTY			(1 << 2)
+#define BAT_S1_LiION_OR_NiMH		(1 << 7)
+#define BAT_S2_LOW_LOW			(1 << 0)
+#define BAT_STOP_CHRG1_BAD_CELL		(1 << 1)
+#define BAT_STOP_CHRG1_COMM_FAIL	(1 << 2)
+#define BAT_STOP_CHRG1_OVERVOLTAGE	(1 << 6)
+#define BAT_STOP_CHRG1_OVERTEMPERATURE	(1 << 7)
+
+
+/* ======= */
+/* Structs */
+/* ======= */
+struct compal_data{
+	/* Fan control */
+	struct device *hwmon_dev;
+	int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by moterboard */
+	unsigned char curr_pwm;
+
+	/* Power supply */
+	struct power_supply psy;
+	struct power_supply_info psy_info;
+	char bat_model_name[BAT_MODEL_NAME_LEN + 1];
+	char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
+	char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
+};
 
-#define COMPAL_DRIVER_VERSION "0.2.6"
 
-#define COMPAL_LCD_LEVEL_MAX 8
+/* =============== */
+/* General globals */
+/* =============== */
+static int force;
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 
-#define COMPAL_EC_COMMAND_WIRELESS 0xBB
-#define COMPAL_EC_COMMAND_LCD_LEVEL 0xB9
+/* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
+ * only gets enabled on a JHL90 board. Might work with the others too */
+static bool extra_features;
+
+/* Nasty stuff. For some reason the fan control is very un-linear.  I've
+ * come up with these values by looping through the possible inputs and
+ * watching the output of address 0x4F (do an ec_transaction writing 0x33
+ * into 0x4F and read a few bytes from the output, like so:
+ *	u8 writeData = 0x33;
+ *	ec_transaction(0x4F, &writeData, 1, buffer, 32, 0);
+ * That address is labled "fan1 table information" in the service manual.
+ * It should be clear which value in 'buffer' changes). This seems to be
+ * related to fan speed. It isn't a proper 'realtime' fan speed value
+ * though, because physically stopping or speeding up the fan doesn't
+ * change it. It might be the average voltage or current of the pwm output.
+ * Nevertheless, it is more fine-grained than the actual RPM reading */
+static const unsigned char pwm_lookup_table[256] = {
+	0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
+	7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
+	13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
+	75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
+	94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
+	139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
+	76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
+	22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
+	219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
+	186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
+	33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
+	206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
+	47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
+	48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
+	189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
+	191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
+	187, 187, 193, 50
+};
 
-#define KILLSWITCH_MASK 0x10
-#define WLAN_MASK	0x01
-#define BT_MASK 	0x02
 
-static struct rfkill *wifi_rfkill;
-static struct rfkill *bt_rfkill;
-static struct platform_device *compal_device;
 
-static int force;
-module_param(force, bool, 0);
-MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 
-/* Hardware access */
+/* ========================= */
+/* Hardware access functions */
+/* ========================= */
+/* General access */
+static u8 ec_read_u8(u8 addr)
+{
+	u8 value;
+	ec_read(addr, &value);
+	return value;
+}
+
+static s8 ec_read_s8(u8 addr)
+{
+	return (s8)ec_read_u8(addr);
+}
+
+static u16 ec_read_u16(u8 addr)
+{
+	int hi, lo;
+	lo = ec_read_u8(addr);
+	hi = ec_read_u8(addr + 1);
+	return (hi << 8) + lo;
+}
+
+static s16 ec_read_s16(u8 addr)
+{
+	return (s16) ec_read_u16(addr);
+}
 
-static int set_lcd_level(int level)
+static void ec_read_sequence(u8 addr, u8 *buf, int len)
 {
-	if (level < 0 || level >= COMPAL_LCD_LEVEL_MAX)
+	int i;
+	for (i = 0; i < len; i++)
+		ec_read(addr + i, buf + i);
+}
+
+
+/* Backlight access */
+static int set_backlight_level(int level)
+{
+	if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
 		return -EINVAL;
 
-	ec_write(COMPAL_EC_COMMAND_LCD_LEVEL, level);
+	ec_write(BACKLIGHT_LEVEL_ADDR, level);
 
-	return 0;
+	return 1;
+}
+
+static int get_backlight_level(void)
+{
+	return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
 }
 
-static int get_lcd_level(void)
+static void set_backlight_state(bool on)
 {
-	u8 result;
+	u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
+	ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0, 0);
+}
+
+
+/* Fan control access */
+static void pwm_enable_control(void)
+{
+	unsigned char writeData = PWM_ENABLE_DATA;
+	ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0, 0);
+}
+
+static void pwm_disable_control(void)
+{
+	unsigned char writeData = PWM_DISABLE_DATA;
+	ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0, 0);
+}
 
-	ec_read(COMPAL_EC_COMMAND_LCD_LEVEL, &result);
+static void set_pwm(int pwm)
+{
+	ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0, 0);
+}
+
+static int get_fan_rpm(void)
+{
+	u8 value, data = FAN_DATA;
+	ec_transaction(FAN_ADDRESS, &data, 1, &value, 1, 0);
+	return 100 * (int)value;
+}
+
+
+
+
+/* =================== */
+/* Interface functions */
+/* =================== */
+
+/* Backlight interface */
+static int bl_get_brightness(struct backlight_device *b)
+{
+	return get_backlight_level();
+}
+
+static int bl_update_status(struct backlight_device *b)
+{
+	int ret = set_backlight_level(b->props.brightness);
+	if (ret)
+		return ret;
 
-	return (int) result;
+	set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
+		&&    !(b->props.state & BL_CORE_SUSPENDED)
+		&&    !(b->props.state & BL_CORE_FBBLANK));
+	return 0;
 }
 
+static const struct backlight_ops compalbl_ops = {
+	.get_brightness = bl_get_brightness,
+	.update_status	= bl_update_status,
+};
+
+
+/* Wireless interface */
 static int compal_rfkill_set(void *data, bool blocked)
 {
 	unsigned long radio = (unsigned long) data;
-	u8 result, value;
-
-	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
+	u8 result = ec_read_u8(WIRELESS_ADDR);
+	u8 value;
 
 	if (!blocked)
 		value = (u8) (result | radio);
 	else
 		value = (u8) (result & ~radio);
-	ec_write(COMPAL_EC_COMMAND_WIRELESS, value);
+	ec_write(WIRELESS_ADDR, value);
 
 	return 0;
 }
 
 static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 {
-	u8 result;
-	bool hw_blocked;
-
-	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
-
-	hw_blocked = !(result & KILLSWITCH_MASK);
+	u8 result = ec_read_u8(WIRELESS_ADDR);
+	bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
 	rfkill_set_hw_state(rfkill, hw_blocked);
 }
 
@@ -116,80 +374,404 @@ static const struct rfkill_ops compal_rfkill_ops = {
 	.set_block = compal_rfkill_set,
 };
 
-static int setup_rfkill(void)
+
+/* Wake_up interface */
+#define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)			\
+static ssize_t NAME##_show(struct device *dev,				\
+	struct device_attribute *attr, char *buf)			\
+{									\
+	return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));	\
+}									\
+static ssize_t NAME##_store(struct device *dev,				\
+	struct device_attribute *attr, const char *buf, size_t count)	\
+{									\
+	int state;							\
+	u8 old_val = ec_read_u8(ADDR);					\
+	if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1))	\
+		return -EINVAL;						\
+	ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));	\
+	return count;							\
+}
+
+SIMPLE_MASKED_STORE_SHOW(wake_up_pme,	WAKE_UP_ADDR, WAKE_UP_PME)
+SIMPLE_MASKED_STORE_SHOW(wake_up_modem,	WAKE_UP_ADDR, WAKE_UP_MODEM)
+SIMPLE_MASKED_STORE_SHOW(wake_up_lan,	WAKE_UP_ADDR, WAKE_UP_LAN)
+SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,	WAKE_UP_ADDR, WAKE_UP_WLAN)
+SIMPLE_MASKED_STORE_SHOW(wake_up_key,	WAKE_UP_ADDR, WAKE_UP_KEY)
+SIMPLE_MASKED_STORE_SHOW(wake_up_mouse,	WAKE_UP_ADDR, WAKE_UP_MOUSE)
+
+
+/* General hwmon interface */
+static ssize_t hwmon_name_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
 {
-	int ret;
+	return sprintf(buf, "%s\n", DRIVER_NAME);
+}
 
-	wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
-				RFKILL_TYPE_WLAN, &compal_rfkill_ops,
-				(void *) WLAN_MASK);
-	if (!wifi_rfkill)
-		return -ENOMEM;
 
-	ret = rfkill_register(wifi_rfkill);
-	if (ret)
-		goto err_wifi;
+/* Fan control interface */
+static ssize_t pwm_enable_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", data->pwm_enable);
+}
 
-	bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
-				RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
-				(void *) BT_MASK);
-	if (!bt_rfkill) {
-		ret = -ENOMEM;
-		goto err_allocate_bt;
+static ssize_t pwm_enable_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	long val;
+	int err;
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+	if (val < 0)
+		return -EINVAL;
+
+	data->pwm_enable = val;
+
+	switch (val) {
+	case 0:  /* Full speed */
+		pwm_enable_control();
+		set_pwm(255);
+		break;
+	case 1:  /* As set by pwm1 */
+		pwm_enable_control();
+		set_pwm(data->curr_pwm);
+		break;
+	default: /* Control by motherboard */
+		pwm_disable_control();
+		break;
 	}
-	ret = rfkill_register(bt_rfkill);
-	if (ret)
-		goto err_register_bt;
 
-	return 0;
+	return count;
+}
 
-err_register_bt:
-	rfkill_destroy(bt_rfkill);
+static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%hhu\n", data->curr_pwm);
+}
 
-err_allocate_bt:
-	rfkill_unregister(wifi_rfkill);
+static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct compal_data *data = dev_get_drvdata(dev);
+	long val;
+	int err;
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return err;
+	if (val < 0 || val > 255)
+		return -EINVAL;
 
-err_wifi:
-	rfkill_destroy(wifi_rfkill);
+	data->curr_pwm = val;
 
-	return ret;
+	if (data->pwm_enable != 1)
+		return count;
+	set_pwm(val);
+
+	return count;
 }
 
-/* Backlight device stuff */
+static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
+		char *buf)
+{
+	return sprintf(buf, "%d\n", get_fan_rpm());
+}
 
-static int bl_get_brightness(struct backlight_device *b)
+
+/* Temperature interface */
+#define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)	\
+static ssize_t temp_##POSTFIX(struct device *dev,			\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));	\
+}									\
+static ssize_t label_##POSTFIX(struct device *dev,			\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	return sprintf(buf, "%s\n", LABEL);				\
+}
+
+/* Labels as in service guide */
+TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
+TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");
+
+
+/* Power supply interface */
+static int bat_status(void)
+{
+	u8 status0 = ec_read_u8(BAT_STATUS0);
+	u8 status1 = ec_read_u8(BAT_STATUS1);
+
+	if (status0 & BAT_S0_CHARGING)
+		return POWER_SUPPLY_STATUS_CHARGING;
+	if (status0 & BAT_S0_DISCHARGE)
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+	if (status1 & BAT_S1_FULL)
+		return POWER_SUPPLY_STATUS_FULL;
+	return POWER_SUPPLY_STATUS_NOT_CHARGING;
+}
+
+static int bat_health(void)
 {
-	return get_lcd_level();
+	u8 status = ec_read_u8(BAT_STOP_CHARGE1);
+
+	if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+	if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
+		return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	if (status & BAT_STOP_CHRG1_BAD_CELL)
+		return POWER_SUPPLY_HEALTH_DEAD;
+	if (status & BAT_STOP_CHRG1_COMM_FAIL)
+		return POWER_SUPPLY_HEALTH_UNKNOWN;
+	return POWER_SUPPLY_HEALTH_GOOD;
 }
 
+static int bat_is_present(void)
+{
+	u8 status = ec_read_u8(BAT_STATUS2);
+	return ((status & BAT_S1_EXISTS) != 0);
+}
 
-static int bl_update_status(struct backlight_device *b)
+static int bat_technology(void)
 {
-	return set_lcd_level(b->props.brightness);
+	u8 status = ec_read_u8(BAT_STATUS1);
+
+	if (status & BAT_S1_LiION_OR_NiMH)
+		return POWER_SUPPLY_TECHNOLOGY_LION;
+	return POWER_SUPPLY_TECHNOLOGY_NiMH;
 }
 
-static struct backlight_ops compalbl_ops = {
-	.get_brightness = bl_get_brightness,
-	.update_status	= bl_update_status,
-};
+static int bat_capacity_level(void)
+{
+	u8 status0 = ec_read_u8(BAT_STATUS0);
+	u8 status1 = ec_read_u8(BAT_STATUS1);
+	u8 status2 = ec_read_u8(BAT_STATUS2);
+
+	if (status0 & BAT_S0_DISCHRG_CRITICAL
+			|| status1 & BAT_S1_EMPTY
+			|| status2 & BAT_S2_LOW_LOW)
+		return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+	if (status0 & BAT_S0_LOW)
+		return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+	if (status1 & BAT_S1_FULL)
+		return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+	return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+}
+
+static int bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct compal_data *data;
+	data = container_of(psy, struct compal_data, psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat_status();
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = bat_health();
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat_is_present();
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat_technology();
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
+		val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		val->intval = ec_read_u8(BAT_POWER) * 1000000;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = ec_read_u8(BAT_CAPACITY);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		val->intval = bat_capacity_level();
+		break;
+	/* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
+	 * the number of degrees, whereas BAT_TEMP is somewhat more
+	 * complicated. It looks like this is a negative nember with a
+	 * 100/256 divider and an offset of 222. Both were determined
+	 * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
+		val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
+		break;
+	/* Neither the model name nor manufacturer name work for me. */
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = data->bat_model_name;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = data->bat_manufacturer_name;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		val->strval = data->bat_serial_number;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
 
-static struct backlight_device *compalbl_device;
 
 
+
+
+/* ============== */
+/* Driver Globals */
+/* ============== */
+static DEVICE_ATTR(wake_up_pme,
+		0644, wake_up_pme_show,		wake_up_pme_store);
+static DEVICE_ATTR(wake_up_modem,
+		0644, wake_up_modem_show,	wake_up_modem_store);
+static DEVICE_ATTR(wake_up_lan,
+		0644, wake_up_lan_show,	wake_up_lan_store);
+static DEVICE_ATTR(wake_up_wlan,
+		0644, wake_up_wlan_show,	wake_up_wlan_store);
+static DEVICE_ATTR(wake_up_key,
+		0644, wake_up_key_show,	wake_up_key_store);
+static DEVICE_ATTR(wake_up_mouse,
+		0644, wake_up_mouse_show,	wake_up_mouse_store);
+
+static SENSOR_DEVICE_ATTR(name,        S_IRUGO, hwmon_name_show,   NULL, 1);
+static SENSOR_DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL, 1);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL, 1);
+static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store, 1);
+static SENSOR_DEVICE_ATTR(pwm1_enable,
+		S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store, 0);
+
+static struct attribute *compal_attributes[] = {
+	&dev_attr_wake_up_pme.attr,
+	&dev_attr_wake_up_modem.attr,
+	&dev_attr_wake_up_lan.attr,
+	&dev_attr_wake_up_wlan.attr,
+	&dev_attr_wake_up_key.attr,
+	&dev_attr_wake_up_mouse.attr,
+	/* Maybe put the sensor-stuff in a separate hwmon-driver? That way,
+	 * the hwmon sysfs won't be cluttered with the above files. */
+	&sensor_dev_attr_name.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp4_input.dev_attr.attr,
+	&sensor_dev_attr_temp5_input.dev_attr.attr,
+	&sensor_dev_attr_temp6_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&sensor_dev_attr_temp2_label.dev_attr.attr,
+	&sensor_dev_attr_temp3_label.dev_attr.attr,
+	&sensor_dev_attr_temp4_label.dev_attr.attr,
+	&sensor_dev_attr_temp5_label.dev_attr.attr,
+	&sensor_dev_attr_temp6_label.dev_attr.attr,
+	NULL
+};
+
+static struct attribute_group compal_attribute_group = {
+	.attrs = compal_attributes
+};
+
+static int __devinit compal_probe(struct platform_device *);
+static int __devexit compal_remove(struct platform_device *);
 static struct platform_driver compal_driver = {
 	.driver = {
-		.name = "compal-laptop",
+		.name = DRIVER_NAME,
 		.owner = THIS_MODULE,
-	}
+	},
+	.probe	= compal_probe,
+	.remove	= __devexit_p(compal_remove)
 };
 
-/* Initialization */
+static enum power_supply_property compal_bat_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_POWER_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static struct backlight_device *compalbl_device;
+
+static struct platform_device *compal_device;
+
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bt_rfkill;
+
+
+
+
+
+/* =================================== */
+/* Initialization & clean-up functions */
+/* =================================== */
 
 static int dmi_check_cb(const struct dmi_system_id *id)
 {
-	printk(KERN_INFO "compal-laptop: Identified laptop model '%s'.\n",
+	printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s'\n",
 		id->ident);
+	extra_features = false;
+	return 0;
+}
 
+static int dmi_check_cb_extra(const struct dmi_system_id *id)
+{
+	printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s', "
+		"enabling extra features\n",
+		id->ident);
+	extra_features = true;
 	return 0;
 }
 
@@ -274,27 +856,106 @@ static struct dmi_system_id __initdata compal_dmi_table[] = {
 		},
 		.callback = dmi_check_cb
 	},
-
+	{
+		.ident = "JHL90",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
+			DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
+		},
+		.callback = dmi_check_cb_extra
+	},
 	{ }
 };
 
+static void initialize_power_supply_data(struct compal_data *data)
+{
+	data->psy.name = DRIVER_NAME;
+	data->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+	data->psy.properties = compal_bat_properties;
+	data->psy.num_properties = ARRAY_SIZE(compal_bat_properties);
+	data->psy.get_property = bat_get_property;
+
+	ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
+					data->bat_manufacturer_name,
+					BAT_MANUFACTURER_NAME_LEN);
+	data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
+
+	ec_read_sequence(BAT_MODEL_NAME_ADDR,
+					data->bat_model_name,
+					BAT_MODEL_NAME_LEN);
+	data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
+
+	scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
+				ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
+}
+
+static void initialize_fan_control_data(struct compal_data *data)
+{
+	data->pwm_enable = 2; /* Keep motherboard in control for now */
+	data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
+				 if we take over... */
+}
+
+static int setup_rfkill(void)
+{
+	int ret;
+
+	wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
+				RFKILL_TYPE_WLAN, &compal_rfkill_ops,
+				(void *) WIRELESS_WLAN);
+	if (!wifi_rfkill)
+		return -ENOMEM;
+
+	ret = rfkill_register(wifi_rfkill);
+	if (ret)
+		goto err_wifi;
+
+	bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
+				RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
+				(void *) WIRELESS_BT);
+	if (!bt_rfkill) {
+		ret = -ENOMEM;
+		goto err_allocate_bt;
+	}
+	ret = rfkill_register(bt_rfkill);
+	if (ret)
+		goto err_register_bt;
+
+	return 0;
+
+err_register_bt:
+	rfkill_destroy(bt_rfkill);
+
+err_allocate_bt:
+	rfkill_unregister(wifi_rfkill);
+
+err_wifi:
+	rfkill_destroy(wifi_rfkill);
+
+	return ret;
+}
+
 static int __init compal_init(void)
 {
 	int ret;
 
-	if (acpi_disabled)
+	if (acpi_disabled) {
+		printk(KERN_ERR DRIVER_NAME": ACPI needs to be enabled for "
+						"this driver to work!\n");
 		return -ENODEV;
+	}
 
-	if (!force && !dmi_check_system(compal_dmi_table))
+	if (!force && !dmi_check_system(compal_dmi_table)) {
+		printk(KERN_ERR DRIVER_NAME": Motherboard not recognized (You "
+				"could try the module's force-parameter)");
 		return -ENODEV;
-
-	/* Register backlight stuff */
+	}
 
 	if (!acpi_video_backlight_support()) {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
-		props.max_brightness = COMPAL_LCD_LEVEL_MAX - 1;
-		compalbl_device = backlight_device_register("compal-laptop",
+		props.max_brightness = BACKLIGHT_LEVEL_MAX;
+		compalbl_device = backlight_device_register(DRIVER_NAME,
 							    NULL, NULL,
 							    &compalbl_ops,
 							    &props);
@@ -304,67 +965,122 @@ static int __init compal_init(void)
 
 	ret = platform_driver_register(&compal_driver);
 	if (ret)
-		goto fail_backlight;
+		goto err_backlight;
 
-	/* Register platform stuff */
-
-	compal_device = platform_device_alloc("compal-laptop", -1);
+	compal_device = platform_device_alloc(DRIVER_NAME, -1);
 	if (!compal_device) {
 		ret = -ENOMEM;
-		goto fail_platform_driver;
+		goto err_platform_driver;
 	}
 
-	ret = platform_device_add(compal_device);
+	ret = platform_device_add(compal_device); /* This calls compal_probe */
 	if (ret)
-		goto fail_platform_device;
+		goto err_platform_device;
 
 	ret = setup_rfkill();
 	if (ret)
-		goto fail_rfkill;
-
-	printk(KERN_INFO "compal-laptop: driver "COMPAL_DRIVER_VERSION
-		" successfully loaded.\n");
+		goto err_rfkill;
 
+	printk(KERN_INFO DRIVER_NAME": Driver "DRIVER_VERSION
+						" successfully loaded\n");
 	return 0;
 
-fail_rfkill:
+err_rfkill:
 	platform_device_del(compal_device);
 
-fail_platform_device:
-
+err_platform_device:
 	platform_device_put(compal_device);
 
-fail_platform_driver:
-
+err_platform_driver:
 	platform_driver_unregister(&compal_driver);
 
-fail_backlight:
-
+err_backlight:
 	backlight_device_unregister(compalbl_device);
 
 	return ret;
 }
 
-static void __exit compal_cleanup(void)
+static int __devinit compal_probe(struct platform_device *pdev)
 {
+	int err;
+	struct compal_data *data;
+
+	if (!extra_features)
+		return 0;
+
+	/* Fan control */
+	data = kzalloc(sizeof(struct compal_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	initialize_fan_control_data(data);
+
+	err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group);
+	if (err)
+		return err;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		sysfs_remove_group(&pdev->dev.kobj,
+				&compal_attribute_group);
+		kfree(data);
+		return err;
+	}
+
+	/* Power supply */
+	initialize_power_supply_data(data);
+	power_supply_register(&compal_device->dev, &data->psy);
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
 
+static void __exit compal_cleanup(void)
+{
 	platform_device_unregister(compal_device);
 	platform_driver_unregister(&compal_driver);
 	backlight_device_unregister(compalbl_device);
 	rfkill_unregister(wifi_rfkill);
-	rfkill_destroy(wifi_rfkill);
 	rfkill_unregister(bt_rfkill);
+	rfkill_destroy(wifi_rfkill);
 	rfkill_destroy(bt_rfkill);
 
-	printk(KERN_INFO "compal-laptop: driver unloaded.\n");
+	printk(KERN_INFO DRIVER_NAME": Driver unloaded\n");
 }
 
+static int __devexit compal_remove(struct platform_device *pdev)
+{
+	struct compal_data *data;
+
+	if (!extra_features)
+		return 0;
+
+	printk(KERN_INFO DRIVER_NAME": Unloading: resetting fan control "
+							"to motherboard\n");
+	pwm_disable_control();
+
+	data = platform_get_drvdata(pdev);
+	hwmon_device_unregister(data->hwmon_dev);
+	power_supply_unregister(&data->psy);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+
+	sysfs_remove_group(&pdev->dev.kobj, &compal_attribute_group);
+
+	return 0;
+}
+
+
 module_init(compal_init);
 module_exit(compal_cleanup);
 
 MODULE_AUTHOR("Cezary Jackiewicz");
+MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
 MODULE_DESCRIPTION("Compal Laptop Support");
-MODULE_VERSION(COMPAL_DRIVER_VERSION);
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
 MODULE_ALIAS("dmi:*:rnIFL90:rvrIFT00:*");
@@ -372,6 +1088,7 @@ MODULE_ALIAS("dmi:*:rnIFL90:rvrREFERENCE:*");
 MODULE_ALIAS("dmi:*:rnIFL91:rvrIFT00:*");
 MODULE_ALIAS("dmi:*:rnJFL92:rvrIFT00:*");
 MODULE_ALIAS("dmi:*:rnIFT00:rvrIFT00:*");
+MODULE_ALIAS("dmi:*:rnJHL90:rvrREFERENCE:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron910:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1010:*");
 MODULE_ALIAS("dmi:*:svnDellInc.:pnInspiron1011:*");
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index 661e3ac4d5b..b41ed5cab3e 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -83,6 +83,12 @@ static const struct dmi_system_id __initdata dell_device_table[] = {
 		},
 	},
 	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /*Laptop*/
+		},
+	},
+	{
 		.ident = "Dell Computer Corporation",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
@@ -467,7 +473,7 @@ static struct backlight_ops dell_ops = {
 	.update_status  = dell_send_intensity,
 };
 
-bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
+static bool dell_laptop_i8042_filter(unsigned char data, unsigned char str,
 			      struct serio *port)
 {
 	static bool extended;
@@ -621,4 +627,5 @@ MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
 MODULE_DESCRIPTION("Dell laptop driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*");
+MODULE_ALIAS("dmi:*svnDellInc.:*:ct9:*");
 MODULE_ALIAS("dmi:*svnDellComputerCorporation.:*:ct8:*");
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c
index 66f53c3c35e..08fb70f6d9b 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell-wmi.c
@@ -221,7 +221,7 @@ static void dell_wmi_notify(u32 value, void *context)
 			return;
 		}
 
-		if (dell_new_hk_type)
+		if (dell_new_hk_type || buffer_entry[1] == 0x0)
 			reported_key = (int)buffer_entry[2];
 		else
 			reported_key = (int)buffer_entry[1] & 0xffff;
@@ -339,13 +339,18 @@ static int __init dell_wmi_init(void)
 	acpi_video = acpi_video_backlight_support();
 
 	err = dell_wmi_input_setup();
-	if (err)
+	if (err) {
+		if (dell_new_hk_type)
+			kfree(dell_wmi_keymap);
 		return err;
+	}
 
 	status = wmi_install_notify_handler(DELL_EVENT_GUID,
 					 dell_wmi_notify, NULL);
 	if (ACPI_FAILURE(status)) {
 		input_unregister_device(dell_wmi_input_dev);
+		if (dell_new_hk_type)
+			kfree(dell_wmi_keymap);
 		printk(KERN_ERR
 			"dell-wmi: Unable to register notify handler - %d\n",
 			status);
@@ -359,6 +364,8 @@ static void __exit dell_wmi_exit(void)
 {
 	wmi_remove_notify_handler(DELL_EVENT_GUID);
 	input_unregister_device(dell_wmi_input_dev);
+	if (dell_new_hk_type)
+		kfree(dell_wmi_keymap);
 }
 
 module_init(dell_wmi_init);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 0306174ba87..6b8e06206c4 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -53,7 +53,7 @@ MODULE_LICENSE("GPL");
 
 static bool hotplug_disabled;
 
-module_param(hotplug_disabled, bool, 0644);
+module_param(hotplug_disabled, bool, 0444);
 MODULE_PARM_DESC(hotplug_disabled,
 		 "Disable hotplug for wireless device. "
 		 "If your laptop need that, please report to "
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index e325aeb37d2..f44cd2620ff 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -182,7 +182,7 @@ static enum led_brightness logolamp_get(struct led_classdev *cdev);
 static void logolamp_set(struct led_classdev *cdev,
 			       enum led_brightness brightness);
 
-struct led_classdev logolamp_led = {
+static struct led_classdev logolamp_led = {
  .name = "fujitsu::logolamp",
  .brightness_get = logolamp_get,
  .brightness_set = logolamp_set
@@ -192,7 +192,7 @@ static enum led_brightness kblamps_get(struct led_classdev *cdev);
 static void kblamps_set(struct led_classdev *cdev,
 			       enum led_brightness brightness);
 
-struct led_classdev kblamps_led = {
+static struct led_classdev kblamps_led = {
  .name = "fujitsu::kblamps",
  .brightness_get = kblamps_get,
  .brightness_set = kblamps_set
@@ -603,7 +603,7 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id)
 	dmi_check_cb_common(id);
 	fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */
 	fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */
-	return 0;
+	return 1;
 }
 
 static int dmi_check_cb_s6420(const struct dmi_system_id *id)
@@ -611,7 +611,7 @@ static int dmi_check_cb_s6420(const struct dmi_system_id *id)
 	dmi_check_cb_common(id);
 	fujitsu->keycode1 = KEY_SCREENLOCK;	/* "Lock" */
 	fujitsu->keycode2 = KEY_HELP;	/* "Mobility Center" */
-	return 0;
+	return 1;
 }
 
 static int dmi_check_cb_p8010(const struct dmi_system_id *id)
@@ -620,7 +620,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id)
 	fujitsu->keycode1 = KEY_HELP;	/* "Support" */
 	fujitsu->keycode3 = KEY_SWITCHVIDEOMODE;	/* "Presentation" */
 	fujitsu->keycode4 = KEY_WWW;	/* "Internet" */
-	return 0;
+	return 1;
 }
 
 static struct dmi_system_id fujitsu_dmi_table[] = {
@@ -725,6 +725,7 @@ static int acpi_fujitsu_add(struct acpi_device *device)
 
 err_unregister_input_dev:
 	input_unregister_device(input);
+	input = NULL;
 err_free_input_dev:
 	input_free_device(input);
 err_stop:
@@ -738,8 +739,6 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type)
 
 	input_unregister_device(input);
 
-	input_free_device(input);
-
 	fujitsu->acpi_handle = NULL;
 
 	return 0;
@@ -930,6 +929,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
 
 err_unregister_input_dev:
 	input_unregister_device(input);
+	input = NULL;
 err_free_input_dev:
 	input_free_device(input);
 err_free_fifo:
@@ -953,8 +953,6 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
 
 	input_unregister_device(input);
 
-	input_free_device(input);
-
 	kfifo_free(&fujitsu_hotkey->fifo);
 
 	fujitsu_hotkey->acpi_handle = NULL;
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 51c07a05a7b..f1551637498 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/input.h>
-#include <acpi/acpi_drivers.h>
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
 #include <linux/rfkill.h>
@@ -52,12 +51,25 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_WIRELESS_QUERY 0x5
 #define HPWMI_HOTKEY_QUERY 0xc
 
+#define PREFIX "HP WMI: "
+#define UNIMP "Unimplemented "
+
 enum hp_wmi_radio {
 	HPWMI_WIFI = 0,
 	HPWMI_BLUETOOTH = 1,
 	HPWMI_WWAN = 2,
 };
 
+enum hp_wmi_event_ids {
+	HPWMI_DOCK_EVENT = 1,
+	HPWMI_PARK_HDD = 2,
+	HPWMI_SMART_ADAPTER = 3,
+	HPWMI_BEZEL_BUTTON = 4,
+	HPWMI_WIRELESS = 5,
+	HPWMI_CPU_BATTERY_THROTTLE = 6,
+	HPWMI_LOCK_SWITCH = 7,
+};
+
 static int __devinit hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
 static int hp_wmi_resume_handler(struct device *device);
@@ -67,13 +79,12 @@ struct bios_args {
 	u32 command;
 	u32 commandtype;
 	u32 datasize;
-	u32 data;
+	char *data;
 };
 
 struct bios_return {
 	u32 sigpass;
 	u32 return_code;
-	u32 value;
 };
 
 struct key_entry {
@@ -88,6 +99,7 @@ static struct key_entry hp_wmi_keymap[] = {
 	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
 	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
 	{KE_KEY, 0x20e6, KEY_PROG1},
+	{KE_KEY, 0x20e8, KEY_MEDIA},
 	{KE_KEY, 0x2142, KEY_MEDIA},
 	{KE_KEY, 0x213b, KEY_INFO},
 	{KE_KEY, 0x2169, KEY_DIRECTION},
@@ -117,7 +129,27 @@ static struct platform_driver hp_wmi_driver = {
 	.remove = hp_wmi_bios_remove,
 };
 
-static int hp_wmi_perform_query(int query, int write, int value)
+/*
+ * hp_wmi_perform_query
+ *
+ * query:	The commandtype -> What should be queried
+ * write:	The command -> 0 read, 1 write, 3 ODM specific
+ * buffer:	Buffer used as input and/or output
+ * buffersize:	Size of buffer
+ *
+ * returns zero on success
+ *         an HP WMI query specific error code (which is positive)
+ *         -EINVAL if the query was not successful at all
+ *         -EINVAL if the output buffer size exceeds buffersize
+ *
+ * Note: The buffersize must at least be the maximum of the input and output
+ *       size. E.g. Battery info query (0x7) is defined to have 1 byte input
+ *       and 128 byte output. The caller would do:
+ *       buffer = kzalloc(128, GFP_KERNEL);
+ *       ret = hp_wmi_perform_query(0x7, 0, buffer, 128)
+ */
+static int hp_wmi_perform_query(int query, int write, char *buffer,
+				int buffersize)
 {
 	struct bios_return bios_return;
 	acpi_status status;
@@ -126,8 +158,8 @@ static int hp_wmi_perform_query(int query, int write, int value)
 		.signature = 0x55434553,
 		.command = write ? 0x2 : 0x1,
 		.commandtype = query,
-		.datasize = write ? 0x4 : 0,
-		.data = value,
+		.datasize = buffersize,
+		.data = buffer,
 	};
 	struct acpi_buffer input = { sizeof(struct bios_args), &args };
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -144,54 +176,90 @@ static int hp_wmi_perform_query(int query, int write, int value)
 	}
 
 	bios_return = *((struct bios_return *)obj->buffer.pointer);
+
+	if (bios_return.return_code) {
+		printk(KERN_WARNING PREFIX "Query %d returned %d\n", query,
+		       bios_return.return_code);
+		kfree(obj);
+		return bios_return.return_code;
+	}
+	if (obj->buffer.length - sizeof(bios_return) > buffersize) {
+		kfree(obj);
+		return -EINVAL;
+	}
+
+	memset(buffer, 0, buffersize);
+	memcpy(buffer,
+	       ((char *)obj->buffer.pointer) + sizeof(struct bios_return),
+	       obj->buffer.length - sizeof(bios_return));
 	kfree(obj);
-	if (bios_return.return_code > 0)
-		return bios_return.return_code * -1;
-	else
-		return bios_return.value;
+	return 0;
 }
 
 static int hp_wmi_display_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_DISPLAY_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
+		return -EINVAL;
+	return state;
 }
 
 static int hp_wmi_hddtemp_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_HDDTEMP_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
+		return -EINVAL;
+	return state;
 }
 
 static int hp_wmi_als_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
+		return -EINVAL;
+	return state;
 }
 
 static int hp_wmi_dock_state(void)
 {
-	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, (char *)&state,
+				       sizeof(state));
 
-	if (ret < 0)
-		return ret;
+	if (ret)
+		return -EINVAL;
 
-	return ret & 0x1;
+	return state & 0x1;
 }
 
 static int hp_wmi_tablet_state(void)
 {
-	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
-
-	if (ret < 0)
+	int state;
+	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, (char *)&state,
+				       sizeof(state));
+	if (ret)
 		return ret;
 
-	return (ret & 0x4) ? 1 : 0;
+	return (state & 0x4) ? 1 : 0;
 }
 
 static int hp_wmi_set_block(void *data, bool blocked)
 {
 	enum hp_wmi_radio r = (enum hp_wmi_radio) data;
 	int query = BIT(r + 8) | ((!blocked) << r);
+	int ret;
 
-	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
+	ret = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1,
+				   (char *)&query, sizeof(query));
+	if (ret)
+		return -EINVAL;
+	return 0;
 }
 
 static const struct rfkill_ops hp_wmi_rfkill_ops = {
@@ -200,8 +268,13 @@ static const struct rfkill_ops hp_wmi_rfkill_ops = {
 
 static bool hp_wmi_get_sw_state(enum hp_wmi_radio r)
 {
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
-	int mask = 0x200 << (r * 8);
+	int wireless;
+	int mask;
+	hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0,
+			     (char *)&wireless, sizeof(wireless));
+	/* TBD: Pass error */
+
+	mask = 0x200 << (r * 8);
 
 	if (wireless & mask)
 		return false;
@@ -211,8 +284,13 @@ static bool hp_wmi_get_sw_state(enum hp_wmi_radio r)
 
 static bool hp_wmi_get_hw_state(enum hp_wmi_radio r)
 {
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
-	int mask = 0x800 << (r * 8);
+	int wireless;
+	int mask;
+	hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0,
+			     (char *)&wireless, sizeof(wireless));
+	/* TBD: Pass error */
+
+	mask = 0x800 << (r * 8);
 
 	if (wireless & mask)
 		return false;
@@ -269,7 +347,11 @@ static ssize_t set_als(struct device *dev, struct device_attribute *attr,
 		       const char *buf, size_t count)
 {
 	u32 tmp = simple_strtoul(buf, NULL, 10);
-	hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, tmp);
+	int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, 1, (char *)&tmp,
+				       sizeof(tmp));
+	if (ret)
+		return -EINVAL;
+
 	return count;
 }
 
@@ -338,47 +420,82 @@ static void hp_wmi_notify(u32 value, void *context)
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
 	static struct key_entry *key;
 	union acpi_object *obj;
-	int eventcode;
+	u32 event_id, event_data;
+	int key_code, ret;
+	u32 *location;
 	acpi_status status;
 
 	status = wmi_get_event_data(value, &response);
 	if (status != AE_OK) {
-		printk(KERN_INFO "hp-wmi: bad event status 0x%x\n", status);
+		printk(KERN_INFO PREFIX "bad event status 0x%x\n", status);
 		return;
 	}
 
 	obj = (union acpi_object *)response.pointer;
 
-	if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) {
-		printk(KERN_INFO "HP WMI: Unknown response received\n");
+	if (!obj)
+		return;
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		printk(KERN_INFO "hp-wmi: Unknown response received %d\n",
+		       obj->type);
 		kfree(obj);
 		return;
 	}
 
-	eventcode = *((u8 *) obj->buffer.pointer);
+	/*
+	 * Depending on ACPI version the concatenation of id and event data
+	 * inside _WED function will result in a 8 or 16 byte buffer.
+	 */
+	location = (u32 *)obj->buffer.pointer;
+	if (obj->buffer.length == 8) {
+		event_id = *location;
+		event_data = *(location + 1);
+	} else if (obj->buffer.length == 16) {
+		event_id = *location;
+		event_data = *(location + 2);
+	} else {
+		printk(KERN_INFO "hp-wmi: Unknown buffer length %d\n",
+		       obj->buffer.length);
+		kfree(obj);
+		return;
+	}
 	kfree(obj);
-	if (eventcode == 0x4)
-		eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
-						0);
-	key = hp_wmi_get_entry_by_scancode(eventcode);
-	if (key) {
-		switch (key->type) {
-		case KE_KEY:
-			input_report_key(hp_wmi_input_dev,
-					 key->keycode, 1);
-			input_sync(hp_wmi_input_dev);
-			input_report_key(hp_wmi_input_dev,
-					 key->keycode, 0);
-			input_sync(hp_wmi_input_dev);
-			break;
-		}
-	} else if (eventcode == 0x1) {
+
+	switch (event_id) {
+	case HPWMI_DOCK_EVENT:
 		input_report_switch(hp_wmi_input_dev, SW_DOCK,
 				    hp_wmi_dock_state());
 		input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
 				    hp_wmi_tablet_state());
 		input_sync(hp_wmi_input_dev);
-	} else if (eventcode == 0x5) {
+		break;
+	case HPWMI_PARK_HDD:
+		break;
+	case HPWMI_SMART_ADAPTER:
+		break;
+	case HPWMI_BEZEL_BUTTON:
+		ret = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+					   (char *)&key_code,
+					   sizeof(key_code));
+		if (ret)
+			break;
+		key = hp_wmi_get_entry_by_scancode(key_code);
+		if (key) {
+			switch (key->type) {
+			case KE_KEY:
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 1);
+				input_sync(hp_wmi_input_dev);
+				input_report_key(hp_wmi_input_dev,
+						 key->keycode, 0);
+				input_sync(hp_wmi_input_dev);
+				break;
+			}
+		} else
+			printk(KERN_INFO PREFIX "Unknown key code - 0x%x\n",
+			       key_code);
+		break;
+	case HPWMI_WIRELESS:
 		if (wifi_rfkill)
 			rfkill_set_states(wifi_rfkill,
 					  hp_wmi_get_sw_state(HPWMI_WIFI),
@@ -391,9 +508,18 @@ static void hp_wmi_notify(u32 value, void *context)
 			rfkill_set_states(wwan_rfkill,
 					  hp_wmi_get_sw_state(HPWMI_WWAN),
 					  hp_wmi_get_hw_state(HPWMI_WWAN));
-	} else
-		printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
-			eventcode);
+		break;
+	case HPWMI_CPU_BATTERY_THROTTLE:
+		printk(KERN_INFO PREFIX UNIMP "CPU throttle because of 3 Cell"
+		       " battery event detected\n");
+		break;
+	case HPWMI_LOCK_SWITCH:
+		break;
+	default:
+		printk(KERN_INFO PREFIX "Unknown event_id - %d - 0x%x\n",
+		       event_id, event_data);
+		break;
+	}
 }
 
 static int __init hp_wmi_input_setup(void)
@@ -402,6 +528,8 @@ static int __init hp_wmi_input_setup(void)
 	int err;
 
 	hp_wmi_input_dev = input_allocate_device();
+	if (!hp_wmi_input_dev)
+		return -ENOMEM;
 
 	hp_wmi_input_dev->name = "HP WMI hotkeys";
 	hp_wmi_input_dev->phys = "wmi/input0";
@@ -450,7 +578,12 @@ static void cleanup_sysfs(struct platform_device *device)
 static int __devinit hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+	int wireless;
+
+	err = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, (char *)&wireless,
+				   sizeof(wireless));
+	if (err)
+		return err;
 
 	err = device_create_file(&device->dev, &dev_attr_display);
 	if (err)
@@ -581,27 +714,51 @@ static int hp_wmi_resume_handler(struct device *device)
 static int __init hp_wmi_init(void)
 {
 	int err;
+	int event_capable = wmi_has_guid(HPWMI_EVENT_GUID);
+	int bios_capable = wmi_has_guid(HPWMI_BIOS_GUID);
 
-	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+	if (event_capable) {
 		err = wmi_install_notify_handler(HPWMI_EVENT_GUID,
 						 hp_wmi_notify, NULL);
-		if (ACPI_SUCCESS(err))
-			hp_wmi_input_setup();
+		if (ACPI_FAILURE(err))
+			return -EINVAL;
+		err = hp_wmi_input_setup();
+		if (err) {
+			wmi_remove_notify_handler(HPWMI_EVENT_GUID);
+			return err;
+		}
 	}
 
-	if (wmi_has_guid(HPWMI_BIOS_GUID)) {
+	if (bios_capable) {
 		err = platform_driver_register(&hp_wmi_driver);
 		if (err)
-			return 0;
+			goto err_driver_reg;
 		hp_wmi_platform_dev = platform_device_alloc("hp-wmi", -1);
 		if (!hp_wmi_platform_dev) {
-			platform_driver_unregister(&hp_wmi_driver);
-			return 0;
+			err = -ENOMEM;
+			goto err_device_alloc;
 		}
-		platform_device_add(hp_wmi_platform_dev);
+		err = platform_device_add(hp_wmi_platform_dev);
+		if (err)
+			goto err_device_add;
 	}
 
+	if (!bios_capable && !event_capable)
+		return -ENODEV;
+
 	return 0;
+
+err_device_add:
+	platform_device_put(hp_wmi_platform_dev);
+err_device_alloc:
+	platform_driver_unregister(&hp_wmi_driver);
+err_driver_reg:
+	if (wmi_has_guid(HPWMI_EVENT_GUID)) {
+		input_unregister_device(hp_wmi_input_dev);
+		wmi_remove_notify_handler(HPWMI_EVENT_GUID);
+	}
+
+	return err;
 }
 
 static void __exit hp_wmi_exit(void)
@@ -611,7 +768,7 @@ static void __exit hp_wmi_exit(void)
 		input_unregister_device(hp_wmi_input_dev);
 	}
 	if (hp_wmi_platform_dev) {
-		platform_device_del(hp_wmi_platform_dev);
+		platform_device_unregister(hp_wmi_platform_dev);
 		platform_driver_unregister(&hp_wmi_driver);
 	}
 }
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
new file mode 100644
index 00000000000..afe82e50dfe
--- /dev/null
+++ b/drivers/platform/x86/intel_ips.c
@@ -0,0 +1,1660 @@
+/*
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Authors:
+ *	Jesse Barnes <jbarnes@virtuousgeek.org>
+ */
+
+/*
+ * Some Intel Ibex Peak based platforms support so-called "intelligent
+ * power sharing", which allows the CPU and GPU to cooperate to maximize
+ * performance within a given TDP (thermal design point).  This driver
+ * performs the coordination between the CPU and GPU, monitors thermal and
+ * power statistics in the platform, and initializes power monitoring
+ * hardware.  It also provides a few tunables to control behavior.  Its
+ * primary purpose is to safely allow CPU and GPU turbo modes to be enabled
+ * by tracking power and thermal budget; secondarily it can boost turbo
+ * performance by allocating more power or thermal budget to the CPU or GPU
+ * based on available headroom and activity.
+ *
+ * The basic algorithm is driven by a 5s moving average of tempurature.  If
+ * thermal headroom is available, the CPU and/or GPU power clamps may be
+ * adjusted upwards.  If we hit the thermal ceiling or a thermal trigger,
+ * we scale back the clamp.  Aside from trigger events (when we're critically
+ * close or over our TDP) we don't adjust the clamps more than once every
+ * five seconds.
+ *
+ * The thermal device (device 31, function 6) has a set of registers that
+ * are updated by the ME firmware.  The ME should also take the clamp values
+ * written to those registers and write them to the CPU, but we currently
+ * bypass that functionality and write the CPU MSR directly.
+ *
+ * UNSUPPORTED:
+ *   - dual MCP configs
+ *
+ * TODO:
+ *   - handle CPU hotplug
+ *   - provide turbo enable/disable api
+ *   - make sure we can write turbo enable/disable reg based on MISC_EN
+ *
+ * Related documents:
+ *   - CDI 403777, 403778 - Auburndale EDS vol 1 & 2
+ *   - CDI 401376 - Ibex Peak EDS
+ *   - ref 26037, 26641 - IPS BIOS spec
+ *   - ref 26489 - Nehalem BIOS writer's guide
+ *   - ref 26921 - Ibex Peak BIOS Specification
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/tick.h>
+#include <linux/timer.h>
+#include <drm/i915_drm.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
+
+/*
+ * Package level MSRs for monitor/control
+ */
+#define PLATFORM_INFO	0xce
+#define   PLATFORM_TDP		(1<<29)
+#define   PLATFORM_RATIO	(1<<28)
+
+#define IA32_MISC_ENABLE	0x1a0
+#define   IA32_MISC_TURBO_EN	(1ULL<<38)
+
+#define TURBO_POWER_CURRENT_LIMIT	0x1ac
+#define   TURBO_TDC_OVR_EN	(1UL<<31)
+#define   TURBO_TDC_MASK	(0x000000007fff0000UL)
+#define   TURBO_TDC_SHIFT	(16)
+#define   TURBO_TDP_OVR_EN	(1UL<<15)
+#define   TURBO_TDP_MASK	(0x0000000000003fffUL)
+
+/*
+ * Core/thread MSRs for monitoring
+ */
+#define IA32_PERF_CTL		0x199
+#define   IA32_PERF_TURBO_DIS	(1ULL<<32)
+
+/*
+ * Thermal PCI device regs
+ */
+#define THM_CFG_TBAR	0x10
+#define THM_CFG_TBAR_HI	0x14
+
+#define THM_TSIU	0x00
+#define THM_TSE		0x01
+#define   TSE_EN	0xb8
+#define THM_TSS		0x02
+#define THM_TSTR	0x03
+#define THM_TSTTP	0x04
+#define THM_TSCO	0x08
+#define THM_TSES	0x0c
+#define THM_TSGPEN	0x0d
+#define   TSGPEN_HOT_LOHI	(1<<1)
+#define   TSGPEN_CRIT_LOHI	(1<<2)
+#define THM_TSPC	0x0e
+#define THM_PPEC	0x10
+#define THM_CTA		0x12
+#define THM_PTA		0x14
+#define   PTA_SLOPE_MASK	(0xff00)
+#define   PTA_SLOPE_SHIFT	8
+#define   PTA_OFFSET_MASK	(0x00ff)
+#define THM_MGTA	0x16
+#define   MGTA_SLOPE_MASK	(0xff00)
+#define   MGTA_SLOPE_SHIFT	8
+#define   MGTA_OFFSET_MASK	(0x00ff)
+#define THM_TRC		0x1a
+#define   TRC_CORE2_EN	(1<<15)
+#define   TRC_THM_EN	(1<<12)
+#define   TRC_C6_WAR	(1<<8)
+#define   TRC_CORE1_EN	(1<<7)
+#define   TRC_CORE_PWR	(1<<6)
+#define   TRC_PCH_EN	(1<<5)
+#define   TRC_MCH_EN	(1<<4)
+#define   TRC_DIMM4	(1<<3)
+#define   TRC_DIMM3	(1<<2)
+#define   TRC_DIMM2	(1<<1)
+#define   TRC_DIMM1	(1<<0)
+#define THM_TES		0x20
+#define THM_TEN		0x21
+#define   TEN_UPDATE_EN	1
+#define THM_PSC		0x24
+#define   PSC_NTG	(1<<0) /* No GFX turbo support */
+#define   PSC_NTPC	(1<<1) /* No CPU turbo support */
+#define   PSC_PP_DEF	(0<<2) /* Perf policy up to driver */
+#define   PSP_PP_PC	(1<<2) /* BIOS prefers CPU perf */
+#define   PSP_PP_BAL	(2<<2) /* BIOS wants balanced perf */
+#define   PSP_PP_GFX	(3<<2) /* BIOS prefers GFX perf */
+#define   PSP_PBRT	(1<<4) /* BIOS run time support */
+#define THM_CTV1	0x30
+#define   CTV_TEMP_ERROR (1<<15)
+#define   CTV_TEMP_MASK	0x3f
+#define   CTV_
+#define THM_CTV2	0x32
+#define THM_CEC		0x34 /* undocumented power accumulator in joules */
+#define THM_AE		0x3f
+#define THM_HTS		0x50 /* 32 bits */
+#define   HTS_PCPL_MASK	(0x7fe00000)
+#define   HTS_PCPL_SHIFT 21
+#define   HTS_GPL_MASK  (0x001ff000)
+#define   HTS_GPL_SHIFT 12
+#define   HTS_PP_MASK	(0x00000c00)
+#define   HTS_PP_SHIFT  10
+#define   HTS_PP_DEF	0
+#define   HTS_PP_PROC	1
+#define   HTS_PP_BAL	2
+#define   HTS_PP_GFX	3
+#define   HTS_PCTD_DIS	(1<<9)
+#define   HTS_GTD_DIS	(1<<8)
+#define   HTS_PTL_MASK  (0x000000fe)
+#define   HTS_PTL_SHIFT 1
+#define   HTS_NVV	(1<<0)
+#define THM_HTSHI	0x54 /* 16 bits */
+#define   HTS2_PPL_MASK		(0x03ff)
+#define   HTS2_PRST_MASK	(0x3c00)
+#define   HTS2_PRST_SHIFT	10
+#define   HTS2_PRST_UNLOADED	0
+#define   HTS2_PRST_RUNNING	1
+#define   HTS2_PRST_TDISOP	2 /* turbo disabled due to power */
+#define   HTS2_PRST_TDISHT	3 /* turbo disabled due to high temp */
+#define   HTS2_PRST_TDISUSR	4 /* user disabled turbo */
+#define   HTS2_PRST_TDISPLAT	5 /* platform disabled turbo */
+#define   HTS2_PRST_TDISPM	6 /* power management disabled turbo */
+#define   HTS2_PRST_TDISERR	7 /* some kind of error disabled turbo */
+#define THM_PTL		0x56
+#define THM_MGTV	0x58
+#define   TV_MASK	0x000000000000ff00
+#define   TV_SHIFT	8
+#define THM_PTV		0x60
+#define   PTV_MASK	0x00ff
+#define THM_MMGPC	0x64
+#define THM_MPPC	0x66
+#define THM_MPCPC	0x68
+#define THM_TSPIEN	0x82
+#define   TSPIEN_AUX_LOHI	(1<<0)
+#define   TSPIEN_HOT_LOHI	(1<<1)
+#define   TSPIEN_CRIT_LOHI	(1<<2)
+#define   TSPIEN_AUX2_LOHI	(1<<3)
+#define THM_TSLOCK	0x83
+#define THM_ATR		0x84
+#define THM_TOF		0x87
+#define THM_STS		0x98
+#define   STS_PCPL_MASK		(0x7fe00000)
+#define   STS_PCPL_SHIFT	21
+#define   STS_GPL_MASK		(0x001ff000)
+#define   STS_GPL_SHIFT		12
+#define   STS_PP_MASK		(0x00000c00)
+#define   STS_PP_SHIFT		10
+#define   STS_PP_DEF		0
+#define   STS_PP_PROC		1
+#define   STS_PP_BAL		2
+#define   STS_PP_GFX		3
+#define   STS_PCTD_DIS		(1<<9)
+#define   STS_GTD_DIS		(1<<8)
+#define   STS_PTL_MASK		(0x000000fe)
+#define   STS_PTL_SHIFT		1
+#define   STS_NVV		(1<<0)
+#define THM_SEC		0x9c
+#define   SEC_ACK	(1<<0)
+#define THM_TC3		0xa4
+#define THM_TC1		0xa8
+#define   STS_PPL_MASK		(0x0003ff00)
+#define   STS_PPL_SHIFT		16
+#define THM_TC2		0xac
+#define THM_DTV		0xb0
+#define THM_ITV		0xd8
+#define   ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */
+#define   ITV_ME_SEQNO_SHIFT (16)
+#define   ITV_MCH_TEMP_MASK 0x0000ff00
+#define   ITV_MCH_TEMP_SHIFT (8)
+#define   ITV_PCH_TEMP_MASK 0x000000ff
+
+#define thm_readb(off) readb(ips->regmap + (off))
+#define thm_readw(off) readw(ips->regmap + (off))
+#define thm_readl(off) readl(ips->regmap + (off))
+#define thm_readq(off) readq(ips->regmap + (off))
+
+#define thm_writeb(off, val) writeb((val), ips->regmap + (off))
+#define thm_writew(off, val) writew((val), ips->regmap + (off))
+#define thm_writel(off, val) writel((val), ips->regmap + (off))
+
+static const int IPS_ADJUST_PERIOD = 5000; /* ms */
+
+/* For initial average collection */
+static const int IPS_SAMPLE_PERIOD = 200; /* ms */
+static const int IPS_SAMPLE_WINDOW = 5000; /* 5s moving window of samples */
+#define IPS_SAMPLE_COUNT (IPS_SAMPLE_WINDOW / IPS_SAMPLE_PERIOD)
+
+/* Per-SKU limits */
+struct ips_mcp_limits {
+	int cpu_family;
+	int cpu_model; /* includes extended model... */
+	int mcp_power_limit; /* mW units */
+	int core_power_limit;
+	int mch_power_limit;
+	int core_temp_limit; /* degrees C */
+	int mch_temp_limit;
+};
+
+/* Max temps are -10 degrees C to avoid PROCHOT# */
+
+struct ips_mcp_limits ips_sv_limits = {
+	.mcp_power_limit = 35000,
+	.core_power_limit = 29000,
+	.mch_power_limit = 20000,
+	.core_temp_limit = 95,
+	.mch_temp_limit = 90
+};
+
+struct ips_mcp_limits ips_lv_limits = {
+	.mcp_power_limit = 25000,
+	.core_power_limit = 21000,
+	.mch_power_limit = 13000,
+	.core_temp_limit = 95,
+	.mch_temp_limit = 90
+};
+
+struct ips_mcp_limits ips_ulv_limits = {
+	.mcp_power_limit = 18000,
+	.core_power_limit = 14000,
+	.mch_power_limit = 11000,
+	.core_temp_limit = 95,
+	.mch_temp_limit = 90
+};
+
+struct ips_driver {
+	struct pci_dev *dev;
+	void *regmap;
+	struct task_struct *monitor;
+	struct task_struct *adjust;
+	struct dentry *debug_root;
+
+	/* Average CPU core temps (all averages in .01 degrees C for precision) */
+	u16 ctv1_avg_temp;
+	u16 ctv2_avg_temp;
+	/* GMCH average */
+	u16 mch_avg_temp;
+	/* Average for the CPU (both cores?) */
+	u16 mcp_avg_temp;
+	/* Average power consumption (in mW) */
+	u32 cpu_avg_power;
+	u32 mch_avg_power;
+
+	/* Offset values */
+	u16 cta_val;
+	u16 pta_val;
+	u16 mgta_val;
+
+	/* Maximums & prefs, protected by turbo status lock */
+	spinlock_t turbo_status_lock;
+	u16 mcp_temp_limit;
+	u16 mcp_power_limit;
+	u16 core_power_limit;
+	u16 mch_power_limit;
+	bool cpu_turbo_enabled;
+	bool __cpu_turbo_on;
+	bool gpu_turbo_enabled;
+	bool __gpu_turbo_on;
+	bool gpu_preferred;
+	bool poll_turbo_status;
+	bool second_cpu;
+	struct ips_mcp_limits *limits;
+
+	/* Optional MCH interfaces for if i915 is in use */
+	unsigned long (*read_mch_val)(void);
+	bool (*gpu_raise)(void);
+	bool (*gpu_lower)(void);
+	bool (*gpu_busy)(void);
+	bool (*gpu_turbo_disable)(void);
+
+	/* For restoration at unload */
+	u64 orig_turbo_limit;
+	u64 orig_turbo_ratios;
+};
+
+/**
+ * ips_cpu_busy - is CPU busy?
+ * @ips: IPS driver struct
+ *
+ * Check CPU for load to see whether we should increase its thermal budget.
+ *
+ * RETURNS:
+ * True if the CPU could use more power, false otherwise.
+ */
+static bool ips_cpu_busy(struct ips_driver *ips)
+{
+	if ((avenrun[0] >> FSHIFT) > 1)
+		return true;
+
+	return false;
+}
+
+/**
+ * ips_cpu_raise - raise CPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Raise the CPU power clamp by %IPS_CPU_STEP, in accordance with TDP for
+ * this platform.
+ *
+ * We do this by adjusting the TURBO_POWER_CURRENT_LIMIT MSR upwards (as
+ * long as we haven't hit the TDP limit for the SKU).
+ */
+static void ips_cpu_raise(struct ips_driver *ips)
+{
+	u64 turbo_override;
+	u16 cur_tdp_limit, new_tdp_limit;
+
+	if (!ips->cpu_turbo_enabled)
+		return;
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	cur_tdp_limit = turbo_override & TURBO_TDP_MASK;
+	new_tdp_limit = cur_tdp_limit + 8; /* 1W increase */
+
+	/* Clamp to SKU TDP limit */
+	if (((new_tdp_limit * 10) / 8) > ips->core_power_limit)
+		new_tdp_limit = cur_tdp_limit;
+
+	thm_writew(THM_MPCPC, (new_tdp_limit * 10) / 8);
+
+	turbo_override |= TURBO_TDC_OVR_EN | TURBO_TDC_OVR_EN;
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	turbo_override &= ~TURBO_TDP_MASK;
+	turbo_override |= new_tdp_limit;
+
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+}
+
+/**
+ * ips_cpu_lower - lower CPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Lower CPU power clamp b %IPS_CPU_STEP if possible.
+ *
+ * We do this by adjusting the TURBO_POWER_CURRENT_LIMIT MSR down, going
+ * as low as the platform limits will allow (though we could go lower there
+ * wouldn't be much point).
+ */
+static void ips_cpu_lower(struct ips_driver *ips)
+{
+	u64 turbo_override;
+	u16 cur_limit, new_limit;
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	cur_limit = turbo_override & TURBO_TDP_MASK;
+	new_limit = cur_limit - 8; /* 1W decrease */
+
+	/* Clamp to SKU TDP limit */
+	if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK))
+		new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK;
+
+	thm_writew(THM_MPCPC, (new_limit * 10) / 8);
+
+	turbo_override |= TURBO_TDC_OVR_EN | TURBO_TDC_OVR_EN;
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	turbo_override &= ~TURBO_TDP_MASK;
+	turbo_override |= new_limit;
+
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+}
+
+/**
+ * do_enable_cpu_turbo - internal turbo enable function
+ * @data: unused
+ *
+ * Internal function for actually updating MSRs.  When we enable/disable
+ * turbo, we need to do it on each CPU; this function is the one called
+ * by on_each_cpu() when needed.
+ */
+static void do_enable_cpu_turbo(void *data)
+{
+	u64 perf_ctl;
+
+	rdmsrl(IA32_PERF_CTL, perf_ctl);
+	if (perf_ctl & IA32_PERF_TURBO_DIS) {
+		perf_ctl &= ~IA32_PERF_TURBO_DIS;
+		wrmsrl(IA32_PERF_CTL, perf_ctl);
+	}
+}
+
+/**
+ * ips_enable_cpu_turbo - enable turbo mode on all CPUs
+ * @ips: IPS driver struct
+ *
+ * Enable turbo mode by clearing the disable bit in IA32_PERF_CTL on
+ * all logical threads.
+ */
+static void ips_enable_cpu_turbo(struct ips_driver *ips)
+{
+	/* Already on, no need to mess with MSRs */
+	if (ips->__cpu_turbo_on)
+		return;
+
+	on_each_cpu(do_enable_cpu_turbo, ips, 1);
+
+	ips->__cpu_turbo_on = true;
+}
+
+/**
+ * do_disable_cpu_turbo - internal turbo disable function
+ * @data: unused
+ *
+ * Internal function for actually updating MSRs.  When we enable/disable
+ * turbo, we need to do it on each CPU; this function is the one called
+ * by on_each_cpu() when needed.
+ */
+static void do_disable_cpu_turbo(void *data)
+{
+	u64 perf_ctl;
+
+	rdmsrl(IA32_PERF_CTL, perf_ctl);
+	if (!(perf_ctl & IA32_PERF_TURBO_DIS)) {
+		perf_ctl |= IA32_PERF_TURBO_DIS;
+		wrmsrl(IA32_PERF_CTL, perf_ctl);
+	}
+}
+
+/**
+ * ips_disable_cpu_turbo - disable turbo mode on all CPUs
+ * @ips: IPS driver struct
+ *
+ * Disable turbo mode by setting the disable bit in IA32_PERF_CTL on
+ * all logical threads.
+ */
+static void ips_disable_cpu_turbo(struct ips_driver *ips)
+{
+	/* Already off, leave it */
+	if (!ips->__cpu_turbo_on)
+		return;
+
+	on_each_cpu(do_disable_cpu_turbo, ips, 1);
+
+	ips->__cpu_turbo_on = false;
+}
+
+/**
+ * ips_gpu_busy - is GPU busy?
+ * @ips: IPS driver struct
+ *
+ * Check GPU for load to see whether we should increase its thermal budget.
+ * We need to call into the i915 driver in this case.
+ *
+ * RETURNS:
+ * True if the GPU could use more power, false otherwise.
+ */
+static bool ips_gpu_busy(struct ips_driver *ips)
+{
+	if (!ips->gpu_turbo_enabled)
+		return false;
+
+	return ips->gpu_busy();
+}
+
+/**
+ * ips_gpu_raise - raise GPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Raise the GPU frequency/power if possible.  We need to call into the
+ * i915 driver in this case.
+ */
+static void ips_gpu_raise(struct ips_driver *ips)
+{
+	if (!ips->gpu_turbo_enabled)
+		return;
+
+	if (!ips->gpu_raise())
+		ips->gpu_turbo_enabled = false;
+
+	return;
+}
+
+/**
+ * ips_gpu_lower - lower GPU power clamp
+ * @ips: IPS driver struct
+ *
+ * Lower GPU frequency/power if possible.  Need to call i915.
+ */
+static void ips_gpu_lower(struct ips_driver *ips)
+{
+	if (!ips->gpu_turbo_enabled)
+		return;
+
+	if (!ips->gpu_lower())
+		ips->gpu_turbo_enabled = false;
+
+	return;
+}
+
+/**
+ * ips_enable_gpu_turbo - notify the gfx driver turbo is available
+ * @ips: IPS driver struct
+ *
+ * Call into the graphics driver indicating that it can safely use
+ * turbo mode.
+ */
+static void ips_enable_gpu_turbo(struct ips_driver *ips)
+{
+	if (ips->__gpu_turbo_on)
+		return;
+	ips->__gpu_turbo_on = true;
+}
+
+/**
+ * ips_disable_gpu_turbo - notify the gfx driver to disable turbo mode
+ * @ips: IPS driver struct
+ *
+ * Request that the graphics driver disable turbo mode.
+ */
+static void ips_disable_gpu_turbo(struct ips_driver *ips)
+{
+	/* Avoid calling i915 if turbo is already disabled */
+	if (!ips->__gpu_turbo_on)
+		return;
+
+	if (!ips->gpu_turbo_disable())
+		dev_err(&ips->dev->dev, "failed to disable graphis turbo\n");
+	else
+		ips->__gpu_turbo_on = false;
+}
+
+/**
+ * mcp_exceeded - check whether we're outside our thermal & power limits
+ * @ips: IPS driver struct
+ *
+ * Check whether the MCP is over its thermal or power budget.
+ */
+static bool mcp_exceeded(struct ips_driver *ips)
+{
+	unsigned long flags;
+	bool ret = false;
+
+	spin_lock_irqsave(&ips->turbo_status_lock, flags);
+	if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100))
+		ret = true;
+	if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit)
+		ret = true;
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+	if (ret)
+		dev_info(&ips->dev->dev,
+			 "MCP power or thermal limit exceeded\n");
+
+	return ret;
+}
+
+/**
+ * cpu_exceeded - check whether a CPU core is outside its limits
+ * @ips: IPS driver struct
+ * @cpu: CPU number to check
+ *
+ * Check a given CPU's average temp or power is over its limit.
+ */
+static bool cpu_exceeded(struct ips_driver *ips, int cpu)
+{
+	unsigned long flags;
+	int avg;
+	bool ret = false;
+
+	spin_lock_irqsave(&ips->turbo_status_lock, flags);
+	avg = cpu ? ips->ctv2_avg_temp : ips->ctv1_avg_temp;
+	if (avg > (ips->limits->core_temp_limit * 100))
+		ret = true;
+	if (ips->cpu_avg_power > ips->core_power_limit * 100)
+		ret = true;
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+	if (ret)
+		dev_info(&ips->dev->dev,
+			 "CPU power or thermal limit exceeded\n");
+
+	return ret;
+}
+
+/**
+ * mch_exceeded - check whether the GPU is over budget
+ * @ips: IPS driver struct
+ *
+ * Check the MCH temp & power against their maximums.
+ */
+static bool mch_exceeded(struct ips_driver *ips)
+{
+	unsigned long flags;
+	bool ret = false;
+
+	spin_lock_irqsave(&ips->turbo_status_lock, flags);
+	if (ips->mch_avg_temp > (ips->limits->mch_temp_limit * 100))
+		ret = true;
+	if (ips->mch_avg_power > ips->mch_power_limit)
+		ret = true;
+	spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+	return ret;
+}
+
+/**
+ * update_turbo_limits - get various limits & settings from regs
+ * @ips: IPS driver struct
+ *
+ * Update the IPS power & temp limits, along with turbo enable flags,
+ * based on latest register contents.
+ *
+ * Used at init time and for runtime BIOS support, which requires polling
+ * the regs for updates (as a result of AC->DC transition for example).
+ *
+ * LOCKING:
+ * Caller must hold turbo_status_lock (outside of init)
+ */
+static void update_turbo_limits(struct ips_driver *ips)
+{
+	u32 hts = thm_readl(THM_HTS);
+
+	ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS);
+	ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS);
+	ips->core_power_limit = thm_readw(THM_MPCPC);
+	ips->mch_power_limit = thm_readw(THM_MMGPC);
+	ips->mcp_temp_limit = thm_readw(THM_PTL);
+	ips->mcp_power_limit = thm_readw(THM_MPPC);
+
+	/* Ignore BIOS CPU vs GPU pref */
+}
+
+/**
+ * ips_adjust - adjust power clamp based on thermal state
+ * @data: ips driver structure
+ *
+ * Wake up every 5s or so and check whether we should adjust the power clamp.
+ * Check CPU and GPU load to determine which needs adjustment.  There are
+ * several things to consider here:
+ *   - do we need to adjust up or down?
+ *   - is CPU busy?
+ *   - is GPU busy?
+ *   - is CPU in turbo?
+ *   - is GPU in turbo?
+ *   - is CPU or GPU preferred? (CPU is default)
+ *
+ * So, given the above, we do the following:
+ *   - up (TDP available)
+ *     - CPU not busy, GPU not busy - nothing
+ *     - CPU busy, GPU not busy - adjust CPU up
+ *     - CPU not busy, GPU busy - adjust GPU up
+ *     - CPU busy, GPU busy - adjust preferred unit up, taking headroom from
+ *       non-preferred unit if necessary
+ *   - down (at TDP limit)
+ *     - adjust both CPU and GPU down if possible
+ *
+		cpu+ gpu+	cpu+gpu-	cpu-gpu+	cpu-gpu-
+cpu < gpu <	cpu+gpu+	cpu+		gpu+		nothing
+cpu < gpu >=	cpu+gpu-(mcp<)	cpu+gpu-(mcp<)	gpu-		gpu-
+cpu >= gpu <	cpu-gpu+(mcp<)	cpu-		cpu-gpu+(mcp<)	cpu-
+cpu >= gpu >=	cpu-gpu-	cpu-gpu-	cpu-gpu-	cpu-gpu-
+ *
+ */
+static int ips_adjust(void *data)
+{
+	struct ips_driver *ips = data;
+	unsigned long flags;
+
+	dev_dbg(&ips->dev->dev, "starting ips-adjust thread\n");
+
+	/*
+	 * Adjust CPU and GPU clamps every 5s if needed.  Doing it more
+	 * often isn't recommended due to ME interaction.
+	 */
+	do {
+		bool cpu_busy = ips_cpu_busy(ips);
+		bool gpu_busy = ips_gpu_busy(ips);
+
+		spin_lock_irqsave(&ips->turbo_status_lock, flags);
+		if (ips->poll_turbo_status)
+			update_turbo_limits(ips);
+		spin_unlock_irqrestore(&ips->turbo_status_lock, flags);
+
+		/* Update turbo status if necessary */
+		if (ips->cpu_turbo_enabled)
+			ips_enable_cpu_turbo(ips);
+		else
+			ips_disable_cpu_turbo(ips);
+
+		if (ips->gpu_turbo_enabled)
+			ips_enable_gpu_turbo(ips);
+		else
+			ips_disable_gpu_turbo(ips);
+
+		/* We're outside our comfort zone, crank them down */
+		if (mcp_exceeded(ips)) {
+			ips_cpu_lower(ips);
+			ips_gpu_lower(ips);
+			goto sleep;
+		}
+
+		if (!cpu_exceeded(ips, 0) && cpu_busy)
+			ips_cpu_raise(ips);
+		else
+			ips_cpu_lower(ips);
+
+		if (!mch_exceeded(ips) && gpu_busy)
+			ips_gpu_raise(ips);
+		else
+			ips_gpu_lower(ips);
+
+sleep:
+		schedule_timeout_interruptible(msecs_to_jiffies(IPS_ADJUST_PERIOD));
+	} while (!kthread_should_stop());
+
+	dev_dbg(&ips->dev->dev, "ips-adjust thread stopped\n");
+
+	return 0;
+}
+
+/*
+ * Helpers for reading out temp/power values and calculating their
+ * averages for the decision making and monitoring functions.
+ */
+
+static u16 calc_avg_temp(struct ips_driver *ips, u16 *array)
+{
+	u64 total = 0;
+	int i;
+	u16 avg;
+
+	for (i = 0; i < IPS_SAMPLE_COUNT; i++)
+		total += (u64)(array[i] * 100);
+
+	do_div(total, IPS_SAMPLE_COUNT);
+
+	avg = (u16)total;
+
+	return avg;
+}
+
+static u16 read_mgtv(struct ips_driver *ips)
+{
+	u16 ret;
+	u64 slope, offset;
+	u64 val;
+
+	val = thm_readq(THM_MGTV);
+	val = (val & TV_MASK) >> TV_SHIFT;
+
+	slope = offset = thm_readw(THM_MGTA);
+	slope = (slope & MGTA_SLOPE_MASK) >> MGTA_SLOPE_SHIFT;
+	offset = offset & MGTA_OFFSET_MASK;
+
+	ret = ((val * slope + 0x40) >> 7) + offset;
+
+	return 0; /* MCH temp reporting buggy */
+}
+
+static u16 read_ptv(struct ips_driver *ips)
+{
+	u16 val, slope, offset;
+
+	slope = (ips->pta_val & PTA_SLOPE_MASK) >> PTA_SLOPE_SHIFT;
+	offset = ips->pta_val & PTA_OFFSET_MASK;
+
+	val = thm_readw(THM_PTV) & PTV_MASK;
+
+	return val;
+}
+
+static u16 read_ctv(struct ips_driver *ips, int cpu)
+{
+	int reg = cpu ? THM_CTV2 : THM_CTV1;
+	u16 val;
+
+	val = thm_readw(reg);
+	if (!(val & CTV_TEMP_ERROR))
+		val = (val) >> 6; /* discard fractional component */
+	else
+		val = 0;
+
+	return val;
+}
+
+static u32 get_cpu_power(struct ips_driver *ips, u32 *last, int period)
+{
+	u32 val;
+	u32 ret;
+
+	/*
+	 * CEC is in joules/65535.  Take difference over time to
+	 * get watts.
+	 */
+	val = thm_readl(THM_CEC);
+
+	/* period is in ms and we want mW */
+	ret = (((val - *last) * 1000) / period);
+	ret = (ret * 1000) / 65535;
+	*last = val;
+
+	return ret;
+}
+
+static const u16 temp_decay_factor = 2;
+static u16 update_average_temp(u16 avg, u16 val)
+{
+	u16 ret;
+
+	/* Multiply by 100 for extra precision */
+	ret = (val * 100 / temp_decay_factor) +
+		(((temp_decay_factor - 1) * avg) / temp_decay_factor);
+	return ret;
+}
+
+static const u16 power_decay_factor = 2;
+static u16 update_average_power(u32 avg, u32 val)
+{
+	u32 ret;
+
+	ret = (val / power_decay_factor) +
+		(((power_decay_factor - 1) * avg) / power_decay_factor);
+
+	return ret;
+}
+
+static u32 calc_avg_power(struct ips_driver *ips, u32 *array)
+{
+	u64 total = 0;
+	u32 avg;
+	int i;
+
+	for (i = 0; i < IPS_SAMPLE_COUNT; i++)
+		total += array[i];
+
+	do_div(total, IPS_SAMPLE_COUNT);
+	avg = (u32)total;
+
+	return avg;
+}
+
+static void monitor_timeout(unsigned long arg)
+{
+	wake_up_process((struct task_struct *)arg);
+}
+
+/**
+ * ips_monitor - temp/power monitoring thread
+ * @data: ips driver structure
+ *
+ * This is the main function for the IPS driver.  It monitors power and
+ * tempurature in the MCP and adjusts CPU and GPU power clams accordingly.
+ *
+ * We keep a 5s moving average of power consumption and tempurature.  Using
+ * that data, along with CPU vs GPU preference, we adjust the power clamps
+ * up or down.
+ */
+static int ips_monitor(void *data)
+{
+	struct ips_driver *ips = data;
+	struct timer_list timer;
+	unsigned long seqno_timestamp, expire, last_msecs, last_sample_period;
+	int i;
+	u32 *cpu_samples, *mchp_samples, old_cpu_power;
+	u16 *mcp_samples, *ctv1_samples, *ctv2_samples, *mch_samples;
+	u8 cur_seqno, last_seqno;
+
+	mcp_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	ctv1_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	ctv2_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	mch_samples = kzalloc(sizeof(u16) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	cpu_samples = kzalloc(sizeof(u32) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	mchp_samples = kzalloc(sizeof(u32) * IPS_SAMPLE_COUNT, GFP_KERNEL);
+	if (!mcp_samples || !ctv1_samples || !ctv2_samples || !mch_samples ||
+			!cpu_samples || !mchp_samples) {
+		dev_err(&ips->dev->dev,
+			"failed to allocate sample array, ips disabled\n");
+		kfree(mcp_samples);
+		kfree(ctv1_samples);
+		kfree(ctv2_samples);
+		kfree(mch_samples);
+		kfree(cpu_samples);
+		kfree(mchp_samples);
+		kthread_stop(ips->adjust);
+		return -ENOMEM;
+	}
+
+	last_seqno = (thm_readl(THM_ITV) & ITV_ME_SEQNO_MASK) >>
+		ITV_ME_SEQNO_SHIFT;
+	seqno_timestamp = get_jiffies_64();
+
+	old_cpu_power = thm_readl(THM_CEC) / 65535;
+	schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
+
+	/* Collect an initial average */
+	for (i = 0; i < IPS_SAMPLE_COUNT; i++) {
+		u32 mchp, cpu_power;
+		u16 val;
+
+		mcp_samples[i] = read_ptv(ips);
+
+		val = read_ctv(ips, 0);
+		ctv1_samples[i] = val;
+
+		val = read_ctv(ips, 1);
+		ctv2_samples[i] = val;
+
+		val = read_mgtv(ips);
+		mch_samples[i] = val;
+
+		cpu_power = get_cpu_power(ips, &old_cpu_power,
+					  IPS_SAMPLE_PERIOD);
+		cpu_samples[i] = cpu_power;
+
+		if (ips->read_mch_val) {
+			mchp = ips->read_mch_val();
+			mchp_samples[i] = mchp;
+		}
+
+		schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
+		if (kthread_should_stop())
+			break;
+	}
+
+	ips->mcp_avg_temp = calc_avg_temp(ips, mcp_samples);
+	ips->ctv1_avg_temp = calc_avg_temp(ips, ctv1_samples);
+	ips->ctv2_avg_temp = calc_avg_temp(ips, ctv2_samples);
+	ips->mch_avg_temp = calc_avg_temp(ips, mch_samples);
+	ips->cpu_avg_power = calc_avg_power(ips, cpu_samples);
+	ips->mch_avg_power = calc_avg_power(ips, mchp_samples);
+	kfree(mcp_samples);
+	kfree(ctv1_samples);
+	kfree(ctv2_samples);
+	kfree(mch_samples);
+	kfree(cpu_samples);
+	kfree(mchp_samples);
+
+	/* Start the adjustment thread now that we have data */
+	wake_up_process(ips->adjust);
+
+	/*
+	 * Ok, now we have an initial avg.  From here on out, we track the
+	 * running avg using a decaying average calculation.  This allows
+	 * us to reduce the sample frequency if the CPU and GPU are idle.
+	 */
+	old_cpu_power = thm_readl(THM_CEC);
+	schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD));
+	last_sample_period = IPS_SAMPLE_PERIOD;
+
+	setup_deferrable_timer_on_stack(&timer, monitor_timeout,
+					(unsigned long)current);
+	do {
+		u32 cpu_val, mch_val;
+		u16 val;
+
+		/* MCP itself */
+		val = read_ptv(ips);
+		ips->mcp_avg_temp = update_average_temp(ips->mcp_avg_temp, val);
+
+		/* Processor 0 */
+		val = read_ctv(ips, 0);
+		ips->ctv1_avg_temp =
+			update_average_temp(ips->ctv1_avg_temp, val);
+		/* Power */
+		cpu_val = get_cpu_power(ips, &old_cpu_power,
+					last_sample_period);
+		ips->cpu_avg_power =
+			update_average_power(ips->cpu_avg_power, cpu_val);
+
+		if (ips->second_cpu) {
+			/* Processor 1 */
+			val = read_ctv(ips, 1);
+			ips->ctv2_avg_temp =
+				update_average_temp(ips->ctv2_avg_temp, val);
+		}
+
+		/* MCH */
+		val = read_mgtv(ips);
+		ips->mch_avg_temp = update_average_temp(ips->mch_avg_temp, val);
+		/* Power */
+		if (ips->read_mch_val) {
+			mch_val = ips->read_mch_val();
+			ips->mch_avg_power =
+				update_average_power(ips->mch_avg_power,
+						     mch_val);
+		}
+
+		/*
+		 * Make sure ME is updating thermal regs.
+		 * Note:
+		 * If it's been more than a second since the last update,
+		 * the ME is probably hung.
+		 */
+		cur_seqno = (thm_readl(THM_ITV) & ITV_ME_SEQNO_MASK) >>
+			ITV_ME_SEQNO_SHIFT;
+		if (cur_seqno == last_seqno &&
+		    time_after(jiffies, seqno_timestamp + HZ)) {
+			dev_warn(&ips->dev->dev, "ME failed to update for more than 1s, likely hung\n");
+		} else {
+			seqno_timestamp = get_jiffies_64();
+			last_seqno = cur_seqno;
+		}
+
+		last_msecs = jiffies_to_msecs(jiffies);
+		expire = jiffies + msecs_to_jiffies(IPS_SAMPLE_PERIOD);
+
+		__set_current_state(TASK_UNINTERRUPTIBLE);
+		mod_timer(&timer, expire);
+		schedule();
+
+		/* Calculate actual sample period for power averaging */
+		last_sample_period = jiffies_to_msecs(jiffies) - last_msecs;
+		if (!last_sample_period)
+			last_sample_period = 1;
+	} while (!kthread_should_stop());
+
+	del_timer_sync(&timer);
+	destroy_timer_on_stack(&timer);
+
+	dev_dbg(&ips->dev->dev, "ips-monitor thread stopped\n");
+
+	return 0;
+}
+
+#if 0
+#define THM_DUMPW(reg) \
+	{ \
+	u16 val = thm_readw(reg); \
+	dev_dbg(&ips->dev->dev, #reg ": 0x%04x\n", val); \
+	}
+#define THM_DUMPL(reg) \
+	{ \
+	u32 val = thm_readl(reg); \
+	dev_dbg(&ips->dev->dev, #reg ": 0x%08x\n", val); \
+	}
+#define THM_DUMPQ(reg) \
+	{ \
+	u64 val = thm_readq(reg); \
+	dev_dbg(&ips->dev->dev, #reg ": 0x%016x\n", val); \
+	}
+
+static void dump_thermal_info(struct ips_driver *ips)
+{
+	u16 ptl;
+
+	ptl = thm_readw(THM_PTL);
+	dev_dbg(&ips->dev->dev, "Processor temp limit: %d\n", ptl);
+
+	THM_DUMPW(THM_CTA);
+	THM_DUMPW(THM_TRC);
+	THM_DUMPW(THM_CTV1);
+	THM_DUMPL(THM_STS);
+	THM_DUMPW(THM_PTV);
+	THM_DUMPQ(THM_MGTV);
+}
+#endif
+
+/**
+ * ips_irq_handler - handle temperature triggers and other IPS events
+ * @irq: irq number
+ * @arg: unused
+ *
+ * Handle temperature limit trigger events, generally by lowering the clamps.
+ * If we're at a critical limit, we clamp back to the lowest possible value
+ * to prevent emergency shutdown.
+ */
+static irqreturn_t ips_irq_handler(int irq, void *arg)
+{
+	struct ips_driver *ips = arg;
+	u8 tses = thm_readb(THM_TSES);
+	u8 tes = thm_readb(THM_TES);
+
+	if (!tses && !tes)
+		return IRQ_NONE;
+
+	dev_info(&ips->dev->dev, "TSES: 0x%02x\n", tses);
+	dev_info(&ips->dev->dev, "TES: 0x%02x\n", tes);
+
+	/* STS update from EC? */
+	if (tes & 1) {
+		u32 sts, tc1;
+
+		sts = thm_readl(THM_STS);
+		tc1 = thm_readl(THM_TC1);
+
+		if (sts & STS_NVV) {
+			spin_lock(&ips->turbo_status_lock);
+			ips->core_power_limit = (sts & STS_PCPL_MASK) >>
+				STS_PCPL_SHIFT;
+			ips->mch_power_limit = (sts & STS_GPL_MASK) >>
+				STS_GPL_SHIFT;
+			/* ignore EC CPU vs GPU pref */
+			ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS);
+			ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS);
+			ips->mcp_temp_limit = (sts & STS_PTL_MASK) >>
+				STS_PTL_SHIFT;
+			ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >>
+				STS_PPL_SHIFT;
+			spin_unlock(&ips->turbo_status_lock);
+
+			thm_writeb(THM_SEC, SEC_ACK);
+		}
+		thm_writeb(THM_TES, tes);
+	}
+
+	/* Thermal trip */
+	if (tses) {
+		dev_warn(&ips->dev->dev,
+			 "thermal trip occurred, tses: 0x%04x\n", tses);
+		thm_writeb(THM_TSES, tses);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#ifndef CONFIG_DEBUG_FS
+static void ips_debugfs_init(struct ips_driver *ips) { return; }
+static void ips_debugfs_cleanup(struct ips_driver *ips) { return; }
+#else
+
+/* Expose current state and limits in debugfs if possible */
+
+struct ips_debugfs_node {
+	struct ips_driver *ips;
+	char *name;
+	int (*show)(struct seq_file *m, void *data);
+};
+
+static int show_cpu_temp(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%d.%02d\n", ips->ctv1_avg_temp / 100,
+		   ips->ctv1_avg_temp % 100);
+
+	return 0;
+}
+
+static int show_cpu_power(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%dmW\n", ips->cpu_avg_power);
+
+	return 0;
+}
+
+static int show_cpu_clamp(struct seq_file *m, void *data)
+{
+	u64 turbo_override;
+	int tdp, tdc;
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+
+	tdp = (int)(turbo_override & TURBO_TDP_MASK);
+	tdc = (int)((turbo_override & TURBO_TDC_MASK) >> TURBO_TDC_SHIFT);
+
+	/* Convert to .1W/A units */
+	tdp = tdp * 10 / 8;
+	tdc = tdc * 10 / 8;
+
+	/* Watts Amperes */
+	seq_printf(m, "%d.%dW %d.%dA\n", tdp / 10, tdp % 10,
+		   tdc / 10, tdc % 10);
+
+	return 0;
+}
+
+static int show_mch_temp(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%d.%02d\n", ips->mch_avg_temp / 100,
+		   ips->mch_avg_temp % 100);
+
+	return 0;
+}
+
+static int show_mch_power(struct seq_file *m, void *data)
+{
+	struct ips_driver *ips = m->private;
+
+	seq_printf(m, "%dmW\n", ips->mch_avg_power);
+
+	return 0;
+}
+
+static struct ips_debugfs_node ips_debug_files[] = {
+	{ NULL, "cpu_temp", show_cpu_temp },
+	{ NULL, "cpu_power", show_cpu_power },
+	{ NULL, "cpu_clamp", show_cpu_clamp },
+	{ NULL, "mch_temp", show_mch_temp },
+	{ NULL, "mch_power", show_mch_power },
+};
+
+static int ips_debugfs_open(struct inode *inode, struct file *file)
+{
+	struct ips_debugfs_node *node = inode->i_private;
+
+	return single_open(file, node->show, node->ips);
+}
+
+static const struct file_operations ips_debugfs_ops = {
+	.owner = THIS_MODULE,
+	.open = ips_debugfs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void ips_debugfs_cleanup(struct ips_driver *ips)
+{
+	if (ips->debug_root)
+		debugfs_remove_recursive(ips->debug_root);
+	return;
+}
+
+static void ips_debugfs_init(struct ips_driver *ips)
+{
+	int i;
+
+	ips->debug_root = debugfs_create_dir("ips", NULL);
+	if (!ips->debug_root) {
+		dev_err(&ips->dev->dev,
+			"failed to create debugfs entries: %ld\n",
+			PTR_ERR(ips->debug_root));
+		return;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ips_debug_files); i++) {
+		struct dentry *ent;
+		struct ips_debugfs_node *node = &ips_debug_files[i];
+
+		node->ips = ips;
+		ent = debugfs_create_file(node->name, S_IFREG | S_IRUGO,
+					  ips->debug_root, node,
+					  &ips_debugfs_ops);
+		if (!ent) {
+			dev_err(&ips->dev->dev,
+				"failed to create debug file: %ld\n",
+				PTR_ERR(ent));
+			goto err_cleanup;
+		}
+	}
+
+	return;
+
+err_cleanup:
+	ips_debugfs_cleanup(ips);
+	return;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/**
+ * ips_detect_cpu - detect whether CPU supports IPS
+ *
+ * Walk our list and see if we're on a supported CPU.  If we find one,
+ * return the limits for it.
+ */
+static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips)
+{
+	u64 turbo_power, misc_en;
+	struct ips_mcp_limits *limits = NULL;
+	u16 tdp;
+
+	if (!(boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 37)) {
+		dev_info(&ips->dev->dev, "Non-IPS CPU detected.\n");
+		goto out;
+	}
+
+	rdmsrl(IA32_MISC_ENABLE, misc_en);
+	/*
+	 * If the turbo enable bit isn't set, we shouldn't try to enable/disable
+	 * turbo manually or we'll get an illegal MSR access, even though
+	 * turbo will still be available.
+	 */
+	if (!(misc_en & IA32_MISC_TURBO_EN))
+		; /* add turbo MSR write allowed flag if necessary */
+
+	if (strstr(boot_cpu_data.x86_model_id, "CPU       M"))
+		limits = &ips_sv_limits;
+	else if (strstr(boot_cpu_data.x86_model_id, "CPU       L"))
+		limits = &ips_lv_limits;
+	else if (strstr(boot_cpu_data.x86_model_id, "CPU       U"))
+		limits = &ips_ulv_limits;
+	else
+		dev_info(&ips->dev->dev, "No CPUID match found.\n");
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_power);
+	tdp = turbo_power & TURBO_TDP_MASK;
+
+	/* Sanity check TDP against CPU */
+	if (limits->mcp_power_limit != (tdp / 8) * 1000) {
+		dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n",
+			 tdp / 8, limits->mcp_power_limit / 1000);
+	}
+
+out:
+	return limits;
+}
+
+/**
+ * ips_get_i915_syms - try to get GPU control methods from i915 driver
+ * @ips: IPS driver
+ *
+ * The i915 driver exports several interfaces to allow the IPS driver to
+ * monitor and control graphics turbo mode.  If we can find them, we can
+ * enable graphics turbo, otherwise we must disable it to avoid exceeding
+ * thermal and power limits in the MCP.
+ */
+static bool ips_get_i915_syms(struct ips_driver *ips)
+{
+	ips->read_mch_val = symbol_get(i915_read_mch_val);
+	if (!ips->read_mch_val)
+		goto out_err;
+	ips->gpu_raise = symbol_get(i915_gpu_raise);
+	if (!ips->gpu_raise)
+		goto out_put_mch;
+	ips->gpu_lower = symbol_get(i915_gpu_lower);
+	if (!ips->gpu_lower)
+		goto out_put_raise;
+	ips->gpu_busy = symbol_get(i915_gpu_busy);
+	if (!ips->gpu_busy)
+		goto out_put_lower;
+	ips->gpu_turbo_disable = symbol_get(i915_gpu_turbo_disable);
+	if (!ips->gpu_turbo_disable)
+		goto out_put_busy;
+
+	return true;
+
+out_put_busy:
+	symbol_put(i915_gpu_turbo_disable);
+out_put_lower:
+	symbol_put(i915_gpu_lower);
+out_put_raise:
+	symbol_put(i915_gpu_raise);
+out_put_mch:
+	symbol_put(i915_read_mch_val);
+out_err:
+	return false;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+		     PCI_DEVICE_ID_INTEL_THERMAL_SENSOR), },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, ips_id_table);
+
+static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u64 platform_info;
+	struct ips_driver *ips;
+	u32 hts;
+	int ret = 0;
+	u16 htshi, trc, trc_required_mask;
+	u8 tse;
+
+	ips = kzalloc(sizeof(struct ips_driver), GFP_KERNEL);
+	if (!ips)
+		return -ENOMEM;
+
+	pci_set_drvdata(dev, ips);
+	ips->dev = dev;
+
+	ips->limits = ips_detect_cpu(ips);
+	if (!ips->limits) {
+		dev_info(&dev->dev, "IPS not supported on this CPU\n");
+		ret = -ENXIO;
+		goto error_free;
+	}
+
+	spin_lock_init(&ips->turbo_status_lock);
+
+	if (!pci_resource_start(dev, 0)) {
+		dev_err(&dev->dev, "TBAR not assigned, aborting\n");
+		ret = -ENXIO;
+		goto error_free;
+	}
+
+	ret = pci_request_regions(dev, "ips thermal sensor");
+	if (ret) {
+		dev_err(&dev->dev, "thermal resource busy, aborting\n");
+		goto error_free;
+	}
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		dev_err(&dev->dev, "can't enable PCI device, aborting\n");
+		goto error_free;
+	}
+
+	ips->regmap = ioremap(pci_resource_start(dev, 0),
+			      pci_resource_len(dev, 0));
+	if (!ips->regmap) {
+		dev_err(&dev->dev, "failed to map thermal regs, aborting\n");
+		ret = -EBUSY;
+		goto error_release;
+	}
+
+	tse = thm_readb(THM_TSE);
+	if (tse != TSE_EN) {
+		dev_err(&dev->dev, "thermal device not enabled (0x%02x), aborting\n", tse);
+		ret = -ENXIO;
+		goto error_unmap;
+	}
+
+	trc = thm_readw(THM_TRC);
+	trc_required_mask = TRC_CORE1_EN | TRC_CORE_PWR | TRC_MCH_EN;
+	if ((trc & trc_required_mask) != trc_required_mask) {
+		dev_err(&dev->dev, "thermal reporting for required devices not enabled, aborting\n");
+		ret = -ENXIO;
+		goto error_unmap;
+	}
+
+	if (trc & TRC_CORE2_EN)
+		ips->second_cpu = true;
+
+	update_turbo_limits(ips);
+	dev_dbg(&dev->dev, "max cpu power clamp: %dW\n",
+		ips->mcp_power_limit / 10);
+	dev_dbg(&dev->dev, "max core power clamp: %dW\n",
+		ips->core_power_limit / 10);
+	/* BIOS may update limits at runtime */
+	if (thm_readl(THM_PSC) & PSP_PBRT)
+		ips->poll_turbo_status = true;
+
+	if (!ips_get_i915_syms(ips)) {
+		dev_err(&dev->dev, "failed to get i915 symbols, graphics turbo disabled\n");
+		ips->gpu_turbo_enabled = false;
+	} else {
+		dev_dbg(&dev->dev, "graphics turbo enabled\n");
+		ips->gpu_turbo_enabled = true;
+	}
+
+	/*
+	 * Check PLATFORM_INFO MSR to make sure this chip is
+	 * turbo capable.
+	 */
+	rdmsrl(PLATFORM_INFO, platform_info);
+	if (!(platform_info & PLATFORM_TDP)) {
+		dev_err(&dev->dev, "platform indicates TDP override unavailable, aborting\n");
+		ret = -ENODEV;
+		goto error_unmap;
+	}
+
+	/*
+	 * IRQ handler for ME interaction
+	 * Note: don't use MSI here as the PCH has bugs.
+	 */
+	pci_disable_msi(dev);
+	ret = request_irq(dev->irq, ips_irq_handler, IRQF_SHARED, "ips",
+			  ips);
+	if (ret) {
+		dev_err(&dev->dev, "request irq failed, aborting\n");
+		goto error_unmap;
+	}
+
+	/* Enable aux, hot & critical interrupts */
+	thm_writeb(THM_TSPIEN, TSPIEN_AUX2_LOHI | TSPIEN_CRIT_LOHI |
+		   TSPIEN_HOT_LOHI | TSPIEN_AUX_LOHI);
+	thm_writeb(THM_TEN, TEN_UPDATE_EN);
+
+	/* Collect adjustment values */
+	ips->cta_val = thm_readw(THM_CTA);
+	ips->pta_val = thm_readw(THM_PTA);
+	ips->mgta_val = thm_readw(THM_MGTA);
+
+	/* Save turbo limits & ratios */
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
+
+	ips_enable_cpu_turbo(ips);
+	ips->cpu_turbo_enabled = true;
+
+	/* Set up the work queue and monitor/adjust threads */
+	ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor");
+	if (IS_ERR(ips->monitor)) {
+		dev_err(&dev->dev,
+			"failed to create thermal monitor thread, aborting\n");
+		ret = -ENOMEM;
+		goto error_free_irq;
+	}
+
+	ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust");
+	if (IS_ERR(ips->adjust)) {
+		dev_err(&dev->dev,
+			"failed to create thermal adjust thread, aborting\n");
+		ret = -ENOMEM;
+		goto error_thread_cleanup;
+	}
+
+	hts = (ips->core_power_limit << HTS_PCPL_SHIFT) |
+		(ips->mcp_temp_limit << HTS_PTL_SHIFT) | HTS_NVV;
+	htshi = HTS2_PRST_RUNNING << HTS2_PRST_SHIFT;
+
+	thm_writew(THM_HTSHI, htshi);
+	thm_writel(THM_HTS, hts);
+
+	ips_debugfs_init(ips);
+
+	dev_info(&dev->dev, "IPS driver initialized, MCP temp limit %d\n",
+		 ips->mcp_temp_limit);
+	return ret;
+
+error_thread_cleanup:
+	kthread_stop(ips->monitor);
+error_free_irq:
+	free_irq(ips->dev->irq, ips);
+error_unmap:
+	iounmap(ips->regmap);
+error_release:
+	pci_release_regions(dev);
+error_free:
+	kfree(ips);
+	return ret;
+}
+
+static void ips_remove(struct pci_dev *dev)
+{
+	struct ips_driver *ips = pci_get_drvdata(dev);
+	u64 turbo_override;
+
+	if (!ips)
+		return;
+
+	ips_debugfs_cleanup(ips);
+
+	/* Release i915 driver */
+	if (ips->read_mch_val)
+		symbol_put(i915_read_mch_val);
+	if (ips->gpu_raise)
+		symbol_put(i915_gpu_raise);
+	if (ips->gpu_lower)
+		symbol_put(i915_gpu_lower);
+	if (ips->gpu_busy)
+		symbol_put(i915_gpu_busy);
+	if (ips->gpu_turbo_disable)
+		symbol_put(i915_gpu_turbo_disable);
+
+	rdmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+	turbo_override &= ~(TURBO_TDC_OVR_EN | TURBO_TDP_OVR_EN);
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, turbo_override);
+	wrmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit);
+
+	free_irq(ips->dev->irq, ips);
+	if (ips->adjust)
+		kthread_stop(ips->adjust);
+	if (ips->monitor)
+		kthread_stop(ips->monitor);
+	iounmap(ips->regmap);
+	pci_release_regions(dev);
+	kfree(ips);
+	dev_dbg(&dev->dev, "IPS driver removed\n");
+}
+
+#ifdef CONFIG_PM
+static int ips_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	return 0;
+}
+
+static int ips_resume(struct pci_dev *dev)
+{
+	return 0;
+}
+#else
+#define ips_suspend NULL
+#define ips_resume NULL
+#endif /* CONFIG_PM */
+
+static void ips_shutdown(struct pci_dev *dev)
+{
+}
+
+static struct pci_driver ips_pci_driver = {
+	.name = "intel ips",
+	.id_table = ips_id_table,
+	.probe = ips_probe,
+	.remove = ips_remove,
+	.suspend = ips_suspend,
+	.resume = ips_resume,
+	.shutdown = ips_shutdown,
+};
+
+static int __init ips_init(void)
+{
+	return pci_register_driver(&ips_pci_driver);
+}
+module_init(ips_init);
+
+static void ips_exit(void)
+{
+	pci_unregister_driver(&ips_pci_driver);
+	return;
+}
+module_exit(ips_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jesse Barnes <jbarnes@virtuousgeek.org>");
+MODULE_DESCRIPTION("Intelligent Power Sharing Driver");
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index 2f795ce2b93..eacd5da7dd2 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -53,6 +53,8 @@ MODULE_LICENSE("GPL");
 #define MEMORY_ARG_CUR_BANDWIDTH 1
 #define MEMORY_ARG_MAX_BANDWIDTH 0
 
+static void intel_menlow_unregister_sensor(void);
+
 /*
  * GTHS returning 'n' would mean that [0,n-1] states are supported
  * In that case max_cstate would be n-1
@@ -406,8 +408,10 @@ static int intel_menlow_add_one_attribute(char *name, int mode, void *show,
 	attr->handle = handle;
 
 	result = device_create_file(dev, &attr->attr);
-	if (result)
+	if (result) {
+		kfree(attr);
 		return result;
+	}
 
 	mutex_lock(&intel_menlow_attr_lock);
 	list_add_tail(&attr->node, &intel_menlow_attr_list);
@@ -431,11 +435,11 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
 	/* _TZ must have the AUX0/1 methods */
 	status = acpi_get_handle(handle, GET_AUX0, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		return (status == AE_NOT_FOUND) ? AE_OK : status;
 
 	status = acpi_get_handle(handle, SET_AUX0, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		return (status == AE_NOT_FOUND) ? AE_OK : status;
 
 	result = intel_menlow_add_one_attribute("aux0", 0644,
 						aux0_show, aux0_store,
@@ -445,17 +449,19 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
 
 	status = acpi_get_handle(handle, GET_AUX1, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		goto aux1_not_found;
 
 	status = acpi_get_handle(handle, SET_AUX1, &dummy);
 	if (ACPI_FAILURE(status))
-		goto not_found;
+		goto aux1_not_found;
 
 	result = intel_menlow_add_one_attribute("aux1", 0644,
 						aux1_show, aux1_store,
 						&thermal->device, handle);
-	if (result)
+	if (result) {
+		intel_menlow_unregister_sensor();
 		return AE_ERROR;
+	}
 
 	/*
 	 * create the "dabney_enabled" attribute which means the user app
@@ -465,14 +471,17 @@ static acpi_status intel_menlow_register_sensor(acpi_handle handle, u32 lvl,
 	result = intel_menlow_add_one_attribute("bios_enabled", 0444,
 						bios_enabled_show, NULL,
 						&thermal->device, handle);
-	if (result)
+	if (result) {
+		intel_menlow_unregister_sensor();
 		return AE_ERROR;
+	}
 
- not_found:
+ aux1_not_found:
 	if (status == AE_NOT_FOUND)
 		return AE_OK;
-	else
-		return status;
+
+	intel_menlow_unregister_sensor();
+	return status;
 }
 
 static void intel_menlow_unregister_sensor(void)
@@ -513,8 +522,10 @@ static int __init intel_menlow_module_init(void)
 	status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
 				     ACPI_UINT32_MAX,
 				     intel_menlow_register_sensor, NULL, NULL, NULL);
-	if (ACPI_FAILURE(status))
+	if (ACPI_FAILURE(status)) {
+		acpi_bus_unregister_driver(&intel_menlow_memory_driver);
 		return -ENODEV;
+	}
 
 	return 0;
 }
diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c
new file mode 100644
index 00000000000..5cdcff65391
--- /dev/null
+++ b/drivers/platform/x86/intel_pmic_gpio.c
@@ -0,0 +1,340 @@
+/* Moorestown PMIC GPIO (access through IPC) driver
+ * Copyright (c) 2008 - 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Moorestown platform PMIC chip
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <asm/intel_scu_ipc.h>
+#include <linux/device.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME "pmic_gpio"
+
+/* register offset that IPC driver should use
+ * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO
+ */
+enum pmic_gpio_register {
+	GPIO0		= 0xE0,
+	GPIO7		= 0xE7,
+	GPIOINT		= 0xE8,
+	GPOSWCTL0	= 0xEC,
+	GPOSWCTL5	= 0xF1,
+	GPO		= 0xF4,
+};
+
+/* bits definition for GPIO & GPOSW */
+#define GPIO_DRV 0x01
+#define GPIO_DIR 0x02
+#define GPIO_DIN 0x04
+#define GPIO_DOU 0x08
+#define GPIO_INTCTL 0x30
+#define GPIO_DBC 0xc0
+
+#define GPOSW_DRV 0x01
+#define GPOSW_DOU 0x08
+#define GPOSW_RDRV 0x30
+
+
+#define NUM_GPIO 24
+
+struct pmic_gpio_irq {
+	spinlock_t lock;
+	u32 trigger[NUM_GPIO];
+	u32 dirty;
+	struct work_struct work;
+};
+
+
+struct pmic_gpio {
+	struct gpio_chip	chip;
+	struct pmic_gpio_irq	irqtypes;
+	void			*gpiointr;
+	int			irq;
+	unsigned		irq_base;
+};
+
+static void pmic_program_irqtype(int gpio, int type)
+{
+	if (type & IRQ_TYPE_EDGE_RISING)
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
+	else
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
+	else
+		intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
+};
+
+static void pmic_irqtype_work(struct work_struct *work)
+{
+	struct pmic_gpio_irq *t =
+		container_of(work, struct pmic_gpio_irq, work);
+	unsigned long flags;
+	int i;
+	u16 type;
+
+	spin_lock_irqsave(&t->lock, flags);
+	/* As we drop the lock, we may need multiple scans if we race the
+	   pmic_irq_type function */
+	while (t->dirty) {
+		/*
+		 *	For each pin that has the dirty bit set send an IPC
+		 *	message to configure the hardware via the PMIC
+		 */
+		for (i = 0; i < NUM_GPIO; i++) {
+			if (!(t->dirty & (1 << i)))
+				continue;
+			t->dirty &= ~(1 << i);
+			/* We can't trust the array entry or dirty
+			   once the lock is dropped */
+			type = t->trigger[i];
+			spin_unlock_irqrestore(&t->lock, flags);
+			pmic_program_irqtype(i, type);
+			spin_lock_irqsave(&t->lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&t->lock, flags);
+}
+
+static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset > 8) {
+		printk(KERN_ERR
+			"%s: only pin 0-7 support input\n", __func__);
+		return -1;/* we only have 8 GPIO can use as input */
+	}
+	return intel_scu_ipc_update_register(GPIO0 + offset,
+							GPIO_DIR, GPIO_DIR);
+}
+
+static int pmic_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	int rc = 0;
+
+	if (offset < 8)/* it is GPIO */
+		rc = intel_scu_ipc_update_register(GPIO0 + offset,
+				GPIO_DRV | GPIO_DOU | GPIO_DIR,
+				GPIO_DRV | (value ? GPIO_DOU : 0));
+	else if (offset < 16)/* it is GPOSW */
+		rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
+				GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV,
+				GPOSW_DRV | (value ? GPOSW_DOU : 0));
+	else if (offset > 15 && offset < 24)/* it is GPO */
+		rc = intel_scu_ipc_update_register(GPO,
+				1 << (offset - 16),
+				value ? 1 << (offset - 16) : 0);
+	else {
+		printk(KERN_ERR
+			"%s: invalid PMIC GPIO pin %d!\n", __func__, offset);
+		WARN_ON(1);
+	}
+
+	return rc;
+}
+
+static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	u8 r;
+	int ret;
+
+	/* we only have 8 GPIO pins we can use as input */
+	if (offset > 8)
+		return -EOPNOTSUPP;
+	ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r);
+	if (ret < 0)
+		return ret;
+	return r & GPIO_DIN;
+}
+
+static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (offset < 8)/* it is GPIO */
+		intel_scu_ipc_update_register(GPIO0 + offset,
+			GPIO_DRV | GPIO_DOU,
+			GPIO_DRV | (value ? GPIO_DOU : 0));
+	else if (offset < 16)/* it is GPOSW */
+		intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
+			GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV,
+			GPOSW_DRV | (value ? GPOSW_DOU : 0));
+	else if (offset > 15 && offset < 24) /* it is GPO */
+		intel_scu_ipc_update_register(GPO,
+			1 << (offset - 16),
+			value ? 1 << (offset - 16) : 0);
+}
+
+static int pmic_irq_type(unsigned irq, unsigned type)
+{
+	struct pmic_gpio *pg = get_irq_chip_data(irq);
+	u32 gpio = irq - pg->irq_base;
+	unsigned long flags;
+
+	if (gpio > pg->chip.ngpio)
+		return -EINVAL;
+
+	spin_lock_irqsave(&pg->irqtypes.lock, flags);
+	pg->irqtypes.trigger[gpio] = type;
+	pg->irqtypes.dirty |=  (1 << gpio);
+	spin_unlock_irqrestore(&pg->irqtypes.lock, flags);
+	schedule_work(&pg->irqtypes.work);
+	return 0;
+}
+
+
+
+static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct pmic_gpio *pg = container_of(chip, struct pmic_gpio, chip);
+
+	return pg->irq_base + offset;
+}
+
+/* the gpiointr register is read-clear, so just do nothing. */
+static void pmic_irq_unmask(unsigned irq)
+{
+};
+
+static void pmic_irq_mask(unsigned irq)
+{
+};
+
+static struct irq_chip pmic_irqchip = {
+	.name		= "PMIC-GPIO",
+	.mask		= pmic_irq_mask,
+	.unmask		= pmic_irq_unmask,
+	.set_type	= pmic_irq_type,
+};
+
+static void pmic_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct pmic_gpio *pg = (struct pmic_gpio *)get_irq_data(irq);
+	u8 intsts = *((u8 *)pg->gpiointr + 4);
+	int gpio;
+
+	for (gpio = 0; gpio < 8; gpio++) {
+		if (intsts & (1 << gpio)) {
+			pr_debug("pmic pin %d triggered\n", gpio);
+			generic_handle_irq(pg->irq_base + gpio);
+		}
+	}
+	desc->chip->eoi(irq);
+}
+
+static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int irq = platform_get_irq(pdev, 0);
+	struct intel_pmic_gpio_platform_data *pdata = dev->platform_data;
+
+	struct pmic_gpio *pg;
+	int retval;
+	int i;
+
+	if (irq < 0) {
+		dev_dbg(dev, "no IRQ line\n");
+		return -EINVAL;
+	}
+
+	if (!pdata || !pdata->gpio_base || !pdata->irq_base) {
+		dev_dbg(dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
+
+	pg = kzalloc(sizeof(*pg), GFP_KERNEL);
+	if (!pg)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, pg);
+
+	pg->irq = irq;
+	/* setting up SRAM mapping for GPIOINT register */
+	pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8);
+	if (!pg->gpiointr) {
+		printk(KERN_ERR "%s: Can not map GPIOINT.\n", __func__);
+		retval = -EINVAL;
+		goto err2;
+	}
+	pg->irq_base = pdata->irq_base;
+	pg->chip.label = "intel_pmic";
+	pg->chip.direction_input = pmic_gpio_direction_input;
+	pg->chip.direction_output = pmic_gpio_direction_output;
+	pg->chip.get = pmic_gpio_get;
+	pg->chip.set = pmic_gpio_set;
+	pg->chip.to_irq = pmic_gpio_to_irq;
+	pg->chip.base = pdata->gpio_base;
+	pg->chip.ngpio = NUM_GPIO;
+	pg->chip.can_sleep = 1;
+	pg->chip.dev = dev;
+
+	INIT_WORK(&pg->irqtypes.work, pmic_irqtype_work);
+	spin_lock_init(&pg->irqtypes.lock);
+
+	pg->chip.dev = dev;
+	retval = gpiochip_add(&pg->chip);
+	if (retval) {
+		printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__);
+		goto err;
+	}
+	set_irq_data(pg->irq, pg);
+	set_irq_chained_handler(pg->irq, pmic_irq_handler);
+	for (i = 0; i < 8; i++) {
+		set_irq_chip_and_handler_name(i + pg->irq_base, &pmic_irqchip,
+					handle_simple_irq, "demux");
+		set_irq_chip_data(i + pg->irq_base, pg);
+	}
+	return 0;
+err:
+	iounmap(pg->gpiointr);
+err2:
+	kfree(pg);
+	return retval;
+}
+
+/* at the same time, register a platform driver
+ * this supports the sfi 0.81 fw */
+static struct platform_driver platform_pmic_gpio_driver = {
+	.driver = {
+		.name		= DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= platform_pmic_gpio_probe,
+};
+
+static int __init platform_pmic_gpio_init(void)
+{
+	return platform_driver_register(&platform_pmic_gpio_driver);
+}
+
+subsys_initcall(platform_pmic_gpio_init);
+
+MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
+MODULE_DESCRIPTION("Intel Moorestown PMIC GPIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/rar_register/rar_register.c b/drivers/platform/x86/intel_rar_register.c
index 618503f422e..73f8e6d7266 100644
--- a/drivers/staging/rar_register/rar_register.c
+++ b/drivers/platform/x86/intel_rar_register.c
@@ -40,15 +40,12 @@
  *      Initial publish
  */
 
-#define DEBUG 1
-
-#include "rar_register.h"
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/rar_register.h>
 
 /* === Lincroft Message Bus Interface === */
 #define LNC_MCR_OFFSET		0xD0	/* Message Control Register */
@@ -155,7 +152,6 @@ static struct rar_device *_rar_to_device(int rar, int *off)
 	return NULL;
 }
 
-
 /**
  *	rar_to_device		-	return the device handling this RAR
  *	@rar: RAR number
@@ -496,7 +492,7 @@ EXPORT_SYMBOL(rar_lock);
  *	a driver that do require a valid RAR address. One of those
  *	steps would be to call rar_get_address()
  *
- *	This function return 0 on success an error code on failure.
+ *	This function return 0 on success or an error code on failure.
  */
 int register_rar(int num, int (*callback)(unsigned long data),
 							unsigned long data)
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index bb2f1fba637..943f9084dcb 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -23,7 +23,7 @@
 #include <linux/pm.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <asm/setup.h>
+#include <asm/mrst.h>
 #include <asm/intel_scu_ipc.h>
 
 /* IPC defines the following message types */
@@ -38,10 +38,6 @@
 #define IPC_CMD_PCNTRL_R      1 /* Register read */
 #define IPC_CMD_PCNTRL_M      2 /* Register read-modify-write */
 
-/* Miscelaneous Command ids */
-#define IPC_CMD_INDIRECT_RD   2 /* 32bit indirect read */
-#define IPC_CMD_INDIRECT_WR   5 /* 32bit indirect write */
-
 /*
  * IPC register summary
  *
@@ -62,8 +58,8 @@
 
 #define IPC_BASE_ADDR     0xFF11C000	/* IPC1 base register address */
 #define IPC_MAX_ADDR      0x100		/* Maximum IPC regisers */
-#define IPC_WWBUF_SIZE    16		/* IPC Write buffer Size */
-#define IPC_RWBUF_SIZE    16		/* IPC Read buffer Size */
+#define IPC_WWBUF_SIZE    20		/* IPC Write buffer Size */
+#define IPC_RWBUF_SIZE    20		/* IPC Read buffer Size */
 #define IPC_I2C_BASE      0xFF12B000	/* I2C control register base address */
 #define IPC_I2C_MAX_ADDR  0x10		/* Maximum I2C regisers */
 
@@ -78,12 +74,7 @@ struct intel_scu_ipc_dev {
 
 static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
 
-static int platform = 1;
-module_param(platform, int, 0);
-MODULE_PARM_DESC(platform, "1 for moorestown platform");
-
-
-
+static int platform;		/* Platform type */
 
 /*
  * IPC Read Buffer (Read Only):
@@ -119,24 +110,6 @@ static inline void ipc_data_writel(u32 data, u32 offset) /* Write ipc data */
 }
 
 /*
- * IPC destination Pointer (Write Only):
- * Use content as pointer for destination write
- */
-static inline void ipc_write_dptr(u32 data) /* Write dptr data */
-{
-	writel(data, ipcdev.ipc_base + 0x0C);
-}
-
-/*
- * IPC Source Pointer (Write Only):
- * Use content as pointer for read location
-*/
-static inline void ipc_write_sptr(u32 data) /* Write dptr data */
-{
-	writel(data, ipcdev.ipc_base + 0x08);
-}
-
-/*
  * Status Register (Read Only):
  * Driver will read this register to get the ready/busy status of the IPC
  * block and error status of the IPC command that was just processed by SCU
@@ -154,7 +127,7 @@ static inline u8 ipc_data_readb(u32 offset) /* Read ipc byte data */
 	return readb(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
 }
 
-static inline u8 ipc_data_readl(u32 offset) /* Read ipc u32 data */
+static inline u32 ipc_data_readl(u32 offset) /* Read ipc u32 data */
 {
 	return readl(ipcdev.ipc_base + IPC_READ_BUFFER + offset);
 }
@@ -175,62 +148,73 @@ static inline int busy_loop(void) /* Wait till scu status is busy */
 			return -ETIMEDOUT;
 		}
 	}
-	return (status >> 1) & 1;
+	if ((status >> 1) & 1)
+		return -EIO;
+
+	return 0;
 }
 
 /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
 static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
 {
-	int nc;
+	int i, nc, bytes, d;
 	u32 offset = 0;
 	u32 err = 0;
-	u8 cbuf[IPC_WWBUF_SIZE] = { '\0' };
+	u8 cbuf[IPC_WWBUF_SIZE] = { };
 	u32 *wbuf = (u32 *)&cbuf;
 
 	mutex_lock(&ipclock);
+
+	memset(cbuf, 0, sizeof(cbuf));
+
 	if (ipcdev.pdev == NULL) {
 		mutex_unlock(&ipclock);
 		return -ENODEV;
 	}
 
-	if (platform == 1) {
-		/* Entry is 4 bytes for read/write, 5 bytes for read modify */
-		for (nc = 0; nc < count; nc++) {
+	if (platform != MRST_CPU_CHIP_PENWELL) {
+		bytes = 0;
+		d = 0;
+		for (i = 0; i < count; i++) {
+			cbuf[bytes++] = addr[i];
+			cbuf[bytes++] = addr[i] >> 8;
+			if (id != IPC_CMD_PCNTRL_R)
+				cbuf[bytes++] = data[d++];
+			if (id == IPC_CMD_PCNTRL_M)
+				cbuf[bytes++] = data[d++];
+		}
+		for (i = 0; i < bytes; i += 4)
+			ipc_data_writel(wbuf[i/4], i);
+		ipc_command(bytes << 16 |  id << 12 | 0 << 8 | op);
+	} else {
+		for (nc = 0; nc < count; nc++, offset += 2) {
 			cbuf[offset] = addr[nc];
 			cbuf[offset + 1] = addr[nc] >> 8;
-			if (id != IPC_CMD_PCNTRL_R)
-				cbuf[offset + 2] = data[nc];
-			if (id == IPC_CMD_PCNTRL_M) {
-				cbuf[offset + 3] = data[nc + 1];
-				offset += 1;
-			}
-			offset += 3;
 		}
-		for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
-			ipc_data_writel(wbuf[nc], offset); /* Write wbuff */
 
-	} else {
-		for (nc = 0, offset = 0; nc < count; nc++, offset += 2)
-			ipc_data_writel(addr[nc], offset); /* Write addresses */
-		if (id != IPC_CMD_PCNTRL_R) {
-			for (nc = 0; nc < count; nc++, offset++)
-				ipc_data_writel(data[nc], offset); /* Write data */
-			if (id == IPC_CMD_PCNTRL_M)
-				ipc_data_writel(data[nc + 1], offset); /* Mask value*/
+		if (id == IPC_CMD_PCNTRL_R) {
+			for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+				ipc_data_writel(wbuf[nc], offset);
+			ipc_command((count*2) << 16 |  id << 12 | 0 << 8 | op);
+		} else if (id == IPC_CMD_PCNTRL_W) {
+			for (nc = 0; nc < count; nc++, offset += 1)
+				cbuf[offset] = data[nc];
+			for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
+				ipc_data_writel(wbuf[nc], offset);
+			ipc_command((count*3) << 16 |  id << 12 | 0 << 8 | op);
+		} else if (id == IPC_CMD_PCNTRL_M) {
+			cbuf[offset] = data[0];
+			cbuf[offset + 1] = data[1];
+			ipc_data_writel(wbuf[0], 0); /* Write wbuff */
+			ipc_command(4 << 16 |  id << 12 | 0 << 8 | op);
 		}
 	}
 
-	if (id != IPC_CMD_PCNTRL_M)
-		ipc_command((count * 3) << 16 |  id << 12 | 0 << 8 | op);
-	else
-		ipc_command((count * 4) << 16 |  id << 12 | 0 << 8 | op);
-
 	err = busy_loop();
-
 	if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
 		/* Workaround: values are read as 0 without memcpy_fromio */
-		memcpy_fromio(cbuf, ipcdev.ipc_base + IPC_READ_BUFFER, 16);
-		if (platform == 1) {
+		memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
+		if (platform != MRST_CPU_CHIP_PENWELL) {
 			for (nc = 0, offset = 2; nc < count; nc++, offset += 3)
 				data[nc] = ipc_data_readb(offset);
 		} else {
@@ -405,70 +389,6 @@ int intel_scu_ipc_update_register(u16 addr, u8 bits, u8 mask)
 EXPORT_SYMBOL(intel_scu_ipc_update_register);
 
 /**
- *	intel_scu_ipc_register_read	-	32bit indirect read
- *	@addr: register address
- *	@value: 32bit value return
- *
- *	Performs IA 32 bit indirect read, returns 0 on success, or an
- *	error code.
- *
- *	Can be used when SCCB(System Controller Configuration Block) register
- *	HRIM(Honor Restricted IPC Messages) is set (bit 23)
- *
- *	This function may sleep. Locking for SCU accesses is handled for
- *	the caller.
- */
-int intel_scu_ipc_register_read(u32 addr, u32 *value)
-{
-	u32 err = 0;
-
-	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
-		mutex_unlock(&ipclock);
-		return -ENODEV;
-	}
-	ipc_write_sptr(addr);
-	ipc_command(4 << 16 | IPC_CMD_INDIRECT_RD);
-	err = busy_loop();
-	*value = ipc_data_readl(0);
-	mutex_unlock(&ipclock);
-	return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_register_read);
-
-/**
- *	intel_scu_ipc_register_write	-	32bit indirect write
- *	@addr: register address
- *	@value: 32bit value to write
- *
- *	Performs IA 32 bit indirect write, returns 0 on success, or an
- *	error code.
- *
- *	Can be used when SCCB(System Controller Configuration Block) register
- *	HRIM(Honor Restricted IPC Messages) is set (bit 23)
- *
- *	This function may sleep. Locking for SCU accesses is handled for
- *	the caller.
- */
-int intel_scu_ipc_register_write(u32 addr, u32 value)
-{
-	u32 err = 0;
-
-	mutex_lock(&ipclock);
-	if (ipcdev.pdev == NULL) {
-		mutex_unlock(&ipclock);
-		return -ENODEV;
-	}
-	ipc_write_dptr(addr);
-	ipc_data_writel(value, 0);
-	ipc_command(4 << 16 | IPC_CMD_INDIRECT_WR);
-	err = busy_loop();
-	mutex_unlock(&ipclock);
-	return err;
-}
-EXPORT_SYMBOL(intel_scu_ipc_register_write);
-
-/**
  *	intel_scu_ipc_simple_command	-	send a simple command
  *	@cmd: command
  *	@sub: sub type
@@ -524,7 +444,7 @@ int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
 	for (i = 0; i < inlen; i++)
 		ipc_data_writel(*in++, 4 * i);
 
-	ipc_command((sub << 12) | cmd | (inlen << 18));
+	ipc_command((inlen << 16) | (sub << 12) | cmd);
 	err = busy_loop();
 
 	for (i = 0; i < outlen; i++)
@@ -803,6 +723,7 @@ static void ipc_remove(struct pci_dev *pdev)
 
 static const struct pci_device_id pci_ids[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080e)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);
@@ -817,6 +738,9 @@ static struct pci_driver ipc_driver = {
 
 static int __init intel_scu_ipc_init(void)
 {
+	platform = mrst_identify_cpu();
+	if (platform == 0)
+		return -ENODEV;
 	return  pci_register_driver(&ipc_driver);
 }
 
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index afd762b58ad..7e9bb6df9d3 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -434,7 +434,7 @@ static int dmi_check_cb(const struct dmi_system_id *id)
 {
 	printk(KERN_INFO "msi-laptop: Identified laptop model '%s'.\n",
 	       id->ident);
-	return 0;
+	return 1;
 }
 
 static struct dmi_system_id __initdata msi_dmi_table[] = {
@@ -562,15 +562,15 @@ static int rfkill_threeg_set(void *data, bool blocked)
 	return 0;
 }
 
-static struct rfkill_ops rfkill_bluetooth_ops = {
+static const struct rfkill_ops rfkill_bluetooth_ops = {
 	.set_block = rfkill_bluetooth_set
 };
 
-static struct rfkill_ops rfkill_wlan_ops = {
+static const struct rfkill_ops rfkill_wlan_ops = {
 	.set_block = rfkill_wlan_set
 };
 
-static struct rfkill_ops rfkill_threeg_ops = {
+static const struct rfkill_ops rfkill_threeg_ops = {
 	.set_block = rfkill_threeg_set
 };
 
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index d1736009636..42a5469a245 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -57,7 +57,7 @@ static struct key_entry msi_wmi_keymap[] = {
 };
 static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
 
-struct backlight_device *backlight;
+static struct backlight_device *backlight;
 
 static int backlight_map[] = { 0x00, 0x33, 0x66, 0x99, 0xCC, 0xFF };
 
diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c
index 2fb9a32926f..ec01c3d8fc5 100644
--- a/drivers/platform/x86/panasonic-laptop.c
+++ b/drivers/platform/x86/panasonic-laptop.c
@@ -248,7 +248,7 @@ static int acpi_pcc_write_sset(struct pcc_acpi *pcc, int func, int val)
 	status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SSET,
 				      &params, NULL);
 
-	return status == AE_OK;
+	return (status == AE_OK) ? 0 : -EIO;
 }
 
 static inline int acpi_pcc_get_sqty(struct acpi_device *device)
@@ -586,7 +586,6 @@ static int acpi_pcc_init_input(struct pcc_acpi *pcc)
 static int acpi_pcc_hotkey_resume(struct acpi_device *device)
 {
 	struct pcc_acpi *pcc = acpi_driver_data(device);
-	acpi_status status = AE_OK;
 
 	if (device == NULL || pcc == NULL)
 		return -EINVAL;
@@ -594,9 +593,7 @@ static int acpi_pcc_hotkey_resume(struct acpi_device *device)
 	ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Sticky mode restore: %d\n",
 			  pcc->sticky_mode));
 
-	status = acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode);
-
-	return status == AE_OK ? 0 : -EINVAL;
+	return acpi_pcc_write_sset(pcc, SINF_STICKY_KEY, pcc->sticky_mode);
 }
 
 static int acpi_pcc_hotkey_add(struct acpi_device *device)
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index 1387c5f9c24..e3154ff7a39 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -561,8 +561,7 @@ static void sony_pf_remove(void)
 	if (!atomic_dec_and_test(&sony_pf_users))
 		return;
 
-	platform_device_del(sony_pf_device);
-	platform_device_put(sony_pf_device);
+	platform_device_unregister(sony_pf_device);
 	platform_driver_unregister(&sony_pf_driver);
 }
 
@@ -1196,9 +1195,13 @@ static void sony_nc_rfkill_setup(struct acpi_device *device)
 	}
 
 	device_enum = (union acpi_object *) buffer.pointer;
-	if (!device_enum || device_enum->type != ACPI_TYPE_BUFFER) {
-		printk(KERN_ERR "Invalid SN06 return object 0x%.2x\n",
-				device_enum->type);
+	if (!device_enum) {
+		pr_err("Invalid SN06 return object\n");
+		goto out_no_enum;
+	}
+	if (device_enum->type != ACPI_TYPE_BUFFER) {
+		pr_err("Invalid SN06 return object type 0x%.2x\n",
+		       device_enum->type);
 		goto out_no_enum;
 	}
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 4bdb13796e2..5d6119bed00 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5838,75 +5838,6 @@ static struct ibm_struct thermal_driver_data = {
 };
 
 /*************************************************************************
- * EC Dump subdriver
- */
-
-static u8 ecdump_regs[256];
-
-static int ecdump_read(struct seq_file *m)
-{
-	int i, j;
-	u8 v;
-
-	seq_printf(m, "EC      "
-		       " +00 +01 +02 +03 +04 +05 +06 +07"
-		       " +08 +09 +0a +0b +0c +0d +0e +0f\n");
-	for (i = 0; i < 256; i += 16) {
-		seq_printf(m, "EC 0x%02x:", i);
-		for (j = 0; j < 16; j++) {
-			if (!acpi_ec_read(i + j, &v))
-				break;
-			if (v != ecdump_regs[i + j])
-				seq_printf(m, " *%02x", v);
-			else
-				seq_printf(m, "  %02x", v);
-			ecdump_regs[i + j] = v;
-		}
-		seq_putc(m, '\n');
-		if (j != 16)
-			break;
-	}
-
-	/* These are way too dangerous to advertise openly... */
-#if 0
-	seq_printf(m, "commands:\t0x<offset> 0x<value>"
-		       " (<offset> is 00-ff, <value> is 00-ff)\n");
-	seq_printf(m, "commands:\t0x<offset> <value>  "
-		       " (<offset> is 00-ff, <value> is 0-255)\n");
-#endif
-	return 0;
-}
-
-static int ecdump_write(char *buf)
-{
-	char *cmd;
-	int i, v;
-
-	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "0x%x 0x%x", &i, &v) == 2) {
-			/* i and v set */
-		} else if (sscanf(cmd, "0x%x %u", &i, &v) == 2) {
-			/* i and v set */
-		} else
-			return -EINVAL;
-		if (i >= 0 && i < 256 && v >= 0 && v < 256) {
-			if (!acpi_ec_write(i, v))
-				return -EIO;
-		} else
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct ibm_struct ecdump_driver_data = {
-	.name = "ecdump",
-	.read = ecdump_read,
-	.write = ecdump_write,
-	.flags.experimental = 1,
-};
-
-/*************************************************************************
  * Backlight/brightness subdriver
  */
 
@@ -8883,9 +8814,6 @@ static struct ibm_init_struct ibms_init[] __initdata = {
 		.data = &thermal_driver_data,
 	},
 	{
-		.data = &ecdump_driver_data,
-	},
-	{
 		.init = brightness_init,
 		.data = &brightness_driver_data,
 	},
@@ -8993,7 +8921,6 @@ TPACPI_PARAM(light);
 TPACPI_PARAM(cmos);
 TPACPI_PARAM(led);
 TPACPI_PARAM(beep);
-TPACPI_PARAM(ecdump);
 TPACPI_PARAM(brightness);
 TPACPI_PARAM(volume);
 TPACPI_PARAM(fan);
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 37aa1479855..7d67a45bb2b 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -4,6 +4,7 @@
  *
  *  Copyright (C) 2002-2004 John Belmonte
  *  Copyright (C) 2008 Philip Langdale
+ *  Copyright (C) 2010 Pierre Ducroquet
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -47,6 +48,7 @@
 #include <linux/platform_device.h>
 #include <linux/rfkill.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/slab.h>
 
 #include <asm/uaccess.h>
@@ -129,6 +131,8 @@ enum {KE_KEY, KE_END};
 
 static struct key_entry toshiba_acpi_keymap[]  = {
 	{KE_KEY, 0x101, KEY_MUTE},
+	{KE_KEY, 0x102, KEY_ZOOMOUT},
+	{KE_KEY, 0x103, KEY_ZOOMIN},
 	{KE_KEY, 0x13b, KEY_COFFEE},
 	{KE_KEY, 0x13c, KEY_BATTERY},
 	{KE_KEY, 0x13d, KEY_SLEEP},
@@ -285,6 +289,7 @@ struct toshiba_acpi_dev {
 	struct platform_device *p_dev;
 	struct rfkill *bt_rfk;
 	struct input_dev *hotkey_dev;
+	int illumination_installed;
 	acpi_handle handle;
 
 	const char *bt_name;
@@ -292,6 +297,110 @@ struct toshiba_acpi_dev {
 	struct mutex mutex;
 };
 
+/* Illumination support */
+static int toshiba_illumination_available(void)
+{
+	u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status;
+
+	in[0] = 0xf100;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "Illumination device not available\n");
+		return 0;
+	}
+	in[0] = 0xf400;
+	status = hci_raw(in, out);
+	return 1;
+}
+
+static void toshiba_illumination_set(struct led_classdev *cdev,
+				     enum led_brightness brightness)
+{
+	u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status;
+
+	/* First request : initialize communication. */
+	in[0] = 0xf100;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "Illumination device not available\n");
+		return;
+	}
+
+	if (brightness) {
+		/* Switch the illumination on */
+		in[0] = 0xf400;
+		in[1] = 0x14e;
+		in[2] = 1;
+		status = hci_raw(in, out);
+		if (ACPI_FAILURE(status)) {
+			printk(MY_INFO "ACPI call for illumination failed.\n");
+			return;
+		}
+	} else {
+		/* Switch the illumination off */
+		in[0] = 0xf400;
+		in[1] = 0x14e;
+		in[2] = 0;
+		status = hci_raw(in, out);
+		if (ACPI_FAILURE(status)) {
+			printk(MY_INFO "ACPI call for illumination failed.\n");
+			return;
+		}
+	}
+
+	/* Last request : close communication. */
+	in[0] = 0xf200;
+	in[1] = 0;
+	in[2] = 0;
+	hci_raw(in, out);
+}
+
+static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
+{
+	u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status;
+	enum led_brightness result;
+
+	/* First request : initialize communication. */
+	in[0] = 0xf100;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "Illumination device not available\n");
+		return LED_OFF;
+	}
+
+	/* Check the illumination */
+	in[0] = 0xf300;
+	in[1] = 0x14e;
+	status = hci_raw(in, out);
+	if (ACPI_FAILURE(status)) {
+		printk(MY_INFO "ACPI call for illumination failed.\n");
+		return LED_OFF;
+	}
+
+	result = out[2] ? LED_FULL : LED_OFF;
+
+	/* Last request : close communication. */
+	in[0] = 0xf200;
+	in[1] = 0;
+	in[2] = 0;
+	hci_raw(in, out);
+
+	return result;
+}
+
+static struct led_classdev toshiba_led = {
+	.name           = "toshiba::illumination",
+	.max_brightness = 1,
+	.brightness_set = toshiba_illumination_set,
+	.brightness_get = toshiba_illumination_get,
+};
+
 static struct toshiba_acpi_dev toshiba_acpi = {
 	.bt_name = "Toshiba Bluetooth",
 };
@@ -720,25 +829,22 @@ static const struct file_operations version_proc_fops = {
 
 #define PROC_TOSHIBA		"toshiba"
 
-static acpi_status __init add_device(void)
+static void __init create_toshiba_proc_entries(void)
 {
 	proc_create("lcd", S_IRUGO | S_IWUSR, toshiba_proc_dir, &lcd_proc_fops);
 	proc_create("video", S_IRUGO | S_IWUSR, toshiba_proc_dir, &video_proc_fops);
 	proc_create("fan", S_IRUGO | S_IWUSR, toshiba_proc_dir, &fan_proc_fops);
 	proc_create("keys", S_IRUGO | S_IWUSR, toshiba_proc_dir, &keys_proc_fops);
 	proc_create("version", S_IRUGO, toshiba_proc_dir, &version_proc_fops);
-
-	return AE_OK;
 }
 
-static acpi_status remove_device(void)
+static void remove_toshiba_proc_entries(void)
 {
 	remove_proc_entry("lcd", toshiba_proc_dir);
 	remove_proc_entry("video", toshiba_proc_dir);
 	remove_proc_entry("fan", toshiba_proc_dir);
 	remove_proc_entry("keys", toshiba_proc_dir);
 	remove_proc_entry("version", toshiba_proc_dir);
-	return AE_OK;
 }
 
 static struct backlight_ops toshiba_backlight_data = {
@@ -906,7 +1012,7 @@ static void toshiba_acpi_exit(void)
 	if (toshiba_backlight_device)
 		backlight_device_unregister(toshiba_backlight_device);
 
-	remove_device();
+	remove_toshiba_proc_entries();
 
 	if (toshiba_proc_dir)
 		remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
@@ -914,6 +1020,9 @@ static void toshiba_acpi_exit(void)
 	acpi_remove_notify_handler(toshiba_acpi.handle, ACPI_DEVICE_NOTIFY,
 				   toshiba_acpi_notify);
 
+	if (toshiba_acpi.illumination_installed)
+		led_classdev_unregister(&toshiba_led);
+
 	platform_device_unregister(toshiba_acpi.p_dev);
 
 	return;
@@ -921,7 +1030,6 @@ static void toshiba_acpi_exit(void)
 
 static int __init toshiba_acpi_init(void)
 {
-	acpi_status status = AE_OK;
 	u32 hci_result;
 	bool bt_present;
 	int ret = 0;
@@ -969,11 +1077,7 @@ static int __init toshiba_acpi_init(void)
 		toshiba_acpi_exit();
 		return -ENODEV;
 	} else {
-		status = add_device();
-		if (ACPI_FAILURE(status)) {
-			toshiba_acpi_exit();
-			return -ENODEV;
-		}
+		create_toshiba_proc_entries();
 	}
 
 	props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
@@ -1013,6 +1117,13 @@ static int __init toshiba_acpi_init(void)
 		}
 	}
 
+	toshiba_acpi.illumination_installed = 0;
+	if (toshiba_illumination_available()) {
+		if (!led_classdev_register(&(toshiba_acpi.p_dev->dev),
+					   &toshiba_led))
+			toshiba_acpi.illumination_installed = 1;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index e4eaa14ed98..b2978a04317 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -518,8 +518,13 @@ static void wmi_notify_debug(u32 value, void *context)
 {
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *obj;
+	acpi_status status;
 
-	wmi_get_event_data(value, &response);
+	status = wmi_get_event_data(value, &response);
+	if (status != AE_OK) {
+		printk(KERN_INFO "wmi: bad event status 0x%x\n", status);
+		return;
+	}
 
 	obj = (union acpi_object *)response.pointer;
 
@@ -543,6 +548,7 @@ static void wmi_notify_debug(u32 value, void *context)
 	default:
 		printk("object type 0x%X\n", obj->type);
 	}
+	kfree(obj);
 }
 
 /**
@@ -804,7 +810,7 @@ static bool guid_already_parsed(const char *guid_string)
 /*
  * Parse the _WDG method for the GUID data blocks
  */
-static __init acpi_status parse_wdg(acpi_handle handle)
+static acpi_status parse_wdg(acpi_handle handle)
 {
 	struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object *obj;
@@ -827,8 +833,10 @@ static __init acpi_status parse_wdg(acpi_handle handle)
 	total = obj->buffer.length / sizeof(struct guid_block);
 
 	gblock = kmemdup(obj->buffer.pointer, obj->buffer.length, GFP_KERNEL);
-	if (!gblock)
-		return AE_NO_MEMORY;
+	if (!gblock) {
+		status = AE_NO_MEMORY;
+		goto out_free_pointer;
+	}
 
 	for (i = 0; i < total; i++) {
 		/*
@@ -848,8 +856,10 @@ static __init acpi_status parse_wdg(acpi_handle handle)
 			wmi_dump_wdg(&gblock[i]);
 
 		wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL);
-		if (!wblock)
-			return AE_NO_MEMORY;
+		if (!wblock) {
+			status = AE_NO_MEMORY;
+			goto out_free_gblock;
+		}
 
 		wblock->gblock = gblock[i];
 		wblock->handle = handle;
@@ -860,8 +870,10 @@ static __init acpi_status parse_wdg(acpi_handle handle)
 		list_add_tail(&wblock->list, &wmi_blocks.list);
 	}
 
-	kfree(out.pointer);
+out_free_gblock:
 	kfree(gblock);
+out_free_pointer:
+	kfree(out.pointer);
 
 	return status;
 }
@@ -947,7 +959,7 @@ static int acpi_wmi_remove(struct acpi_device *device, int type)
 	return 0;
 }
 
-static int __init acpi_wmi_add(struct acpi_device *device)
+static int acpi_wmi_add(struct acpi_device *device)
 {
 	acpi_status status;
 	int result = 0;
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 92965172585..0e4122ed1b3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -109,8 +109,6 @@ source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"
 
-source "drivers/staging/rar_register/Kconfig"
-
 source "drivers/staging/memrar/Kconfig"
 
 source "drivers/staging/sep/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 6c5b5237ccb..ecfb0bb990b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_VT6656)		+= vt6656/
 obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
-obj-$(CONFIG_RAR_REGISTER)	+= rar_register/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
 obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
diff --git a/drivers/staging/memrar/memrar_handler.c b/drivers/staging/memrar/memrar_handler.c
index efa7fd62d39..41876f2b0e5 100644
--- a/drivers/staging/memrar/memrar_handler.c
+++ b/drivers/staging/memrar/memrar_handler.c
@@ -47,8 +47,7 @@
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-
-#include "../rar_register/rar_register.h"
+#include <linux/rar_register.h>
 
 #include "memrar.h"
 #include "memrar_allocator.h"
diff --git a/drivers/staging/rar_register/Kconfig b/drivers/staging/rar_register/Kconfig
deleted file mode 100644
index e9c27738199..00000000000
--- a/drivers/staging/rar_register/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# RAR device configuration
-#
-
-menu "RAR Register Driver"
-#
-#	Restricted Access Register Manager
-#
-config RAR_REGISTER
-	tristate "Restricted Access Region Register Driver"
-	depends on PCI
-	default n
-	---help---
-	  This driver allows other kernel drivers access to the
-	  contents of the restricted access region control registers.
-
-	  The restricted access region control registers
-	  (rar_registers) are used to pass address and
-	  locking information on restricted access regions
-	  to other drivers that use restricted access regions.
-
-	  The restricted access regions are regions of memory
-	  on the Intel MID Platform that are not accessible to
-	  the x86 processor, but are accessible to dedicated
-	  processors on board peripheral devices.
-
-	  The purpose of the restricted access regions is to
-	  protect sensitive data from compromise by unauthorized
-	  programs running on the x86 processor.
-endmenu
diff --git a/drivers/staging/rar_register/Makefile b/drivers/staging/rar_register/Makefile
deleted file mode 100644
index d5954ccc16c..00000000000
--- a/drivers/staging/rar_register/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-EXTRA_CFLAGS += -DLITTLE__ENDIAN
-obj-$(CONFIG_RAR_REGISTER) += rar_register.o
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 7f0028e1010..8f8b072c4c7 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -33,6 +33,15 @@
  * subject to backwards-compatibility constraints.
  */
 
+#ifdef __KERNEL__
+/* For use by IPS driver */
+extern unsigned long i915_read_mch_val(void);
+extern bool i915_gpu_raise(void);
+extern bool i915_gpu_lower(void);
+extern bool i915_gpu_busy(void);
+extern bool i915_gpu_turbo_disable(void);
+#endif
+
 /* Each region is a minimum of 16k, and there are at most 255 of them.
  */
 #define I915_NR_TEX_REGIONS 255	/* table size 2k - maximum due to use
diff --git a/include/linux/intel_pmic_gpio.h b/include/linux/intel_pmic_gpio.h
new file mode 100644
index 00000000000..920109a2919
--- /dev/null
+++ b/include/linux/intel_pmic_gpio.h
@@ -0,0 +1,15 @@
+#ifndef LINUX_INTEL_PMIC_H
+#define LINUX_INTEL_PMIC_H
+
+struct intel_pmic_gpio_platform_data {
+	/* the first IRQ of the chip */
+	unsigned	irq_base;
+	/* number assigned to the first GPIO */
+	unsigned	gpio_base;
+	/* sram address for gpiointr register, the langwell chip will map
+	 * the PMIC spi GPIO expander's GPIOINTR register in sram.
+	 */
+	unsigned	gpiointr;
+};
+
+#endif
diff --git a/drivers/staging/rar_register/rar_register.h b/include/linux/rar_register.h
index ffa805780f8..ffa805780f8 100644
--- a/drivers/staging/rar_register/rar_register.h
+++ b/include/linux/rar_register.h
diff --git a/include/linux/timer.h b/include/linux/timer.h
index ea965b857a5..38cf093ef62 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -100,6 +100,13 @@ void init_timer_deferrable_key(struct timer_list *timer,
 		setup_timer_on_stack_key((timer), #timer, &__key,	\
 					 (fn), (data));			\
 	} while (0)
+#define setup_deferrable_timer_on_stack(timer, fn, data)		\
+	do {								\
+		static struct lock_class_key __key;			\
+		setup_deferrable_timer_on_stack_key((timer), #timer,	\
+						    &__key, (fn),	\
+						    (data));		\
+	} while (0)
 #else
 #define init_timer(timer)\
 	init_timer_key((timer), NULL, NULL)
@@ -111,6 +118,8 @@ void init_timer_deferrable_key(struct timer_list *timer,
 	setup_timer_key((timer), NULL, NULL, (fn), (data))
 #define setup_timer_on_stack(timer, fn, data)\
 	setup_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
+#define setup_deferrable_timer_on_stack(timer, fn, data)\
+	setup_deferrable_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
 #endif
 
 #ifdef CONFIG_DEBUG_OBJECTS_TIMERS
@@ -150,6 +159,12 @@ static inline void setup_timer_on_stack_key(struct timer_list *timer,
 	init_timer_on_stack_key(timer, name, key);
 }
 
+extern void setup_deferrable_timer_on_stack_key(struct timer_list *timer,
+						const char *name,
+						struct lock_class_key *key,
+						void (*function)(unsigned long),
+						unsigned long data);
+
 /**
  * timer_pending - is a timer pending?
  * @timer: the timer in question
diff --git a/kernel/timer.c b/kernel/timer.c
index ee305c8d4e1..efde11e197c 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -577,6 +577,19 @@ static void __init_timer(struct timer_list *timer,
 	lockdep_init_map(&timer->lockdep_map, name, key, 0);
 }
 
+void setup_deferrable_timer_on_stack_key(struct timer_list *timer,
+					 const char *name,
+					 struct lock_class_key *key,
+					 void (*function)(unsigned long),
+					 unsigned long data)
+{
+	timer->function = function;
+	timer->data = data;
+	init_timer_on_stack_key(timer, name, key);
+	timer_set_deferrable(timer);
+}
+EXPORT_SYMBOL_GPL(setup_deferrable_timer_on_stack_key);
+
 /**
  * init_timer_key - initialize a timer
  * @timer: the timer to be initialized