summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-06 17:58:22 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-06 17:58:22 -0800
commite4e88f31bcb5f05f24b9ae518d4ecb44e1a7774d (patch)
tree9eef6998f5bbd1a2c999011d9e0151f00c6e7297
parent9753dfe19a85e7e45a34a56f4cb2048bb4f50e27 (diff)
parentef88e3911c0e0301e73fa3b3b2567aabdbe17cc4 (diff)
downloadlinux-3.10-e4e88f31bcb5f05f24b9ae518d4ecb44e1a7774d.tar.gz
linux-3.10-e4e88f31bcb5f05f24b9ae518d4ecb44e1a7774d.tar.bz2
linux-3.10-e4e88f31bcb5f05f24b9ae518d4ecb44e1a7774d.zip
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits) powerpc: fix compile error with 85xx/p1010rdb.c powerpc: fix compile error with 85xx/p1023_rds.c powerpc/fsl: add MSI support for the Freescale hypervisor arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree powerpc/fsl: Add support for Integrated Flash Controller powerpc/fsl: update compatiable on fsl 16550 uart nodes powerpc/85xx: fix PCI and localbus properties in p1022ds.dts powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig powerpc/fsl: Update defconfigs to enable some standard FSL HW features powerpc: Add TBI PHY node to first MDIO bus sbc834x: put full compat string in board match check powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit offb: Fix setting of the pseudo-palette for >8bpp offb: Add palette hack for qemu "standard vga" framebuffer offb: Fix bug in calculating requested vram size powerpc/boot: Change the WARN to INFO for boot wrapper overlap message powerpc/44x: Fix build error on currituck platform powerpc/boot: Change the load address for the wrapper to fit the kernel powerpc/44x: Enable CRASH_DUMP for 440x ... Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to the additional sparse-checking code for cputime_t.
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt163
-rw-r--r--Documentation/devicetree/bindings/powerpc/fsl/srio.txt103
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/powerpc/Kconfig54
-rw-r--r--arch/powerpc/Kconfig.debug12
-rw-r--r--arch/powerpc/Makefile11
-rw-r--r--arch/powerpc/boot/Makefile12
-rw-r--r--arch/powerpc/boot/dcr.h6
-rw-r--r--arch/powerpc/boot/div64.S52
-rw-r--r--arch/powerpc/boot/dts/asp834x-redboot.dts4
-rw-r--r--arch/powerpc/boot/dts/currituck.dts237
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi248
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi63
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi191
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi63
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi143
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi62
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi270
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi65
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi304
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi64
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi196
-rw-r--r--arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi70
-rw-r--r--arch/powerpc/boot/dts/fsl/p1010si-post.dtsi198
-rw-r--r--arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi64
-rw-r--r--arch/powerpc/boot/dts/fsl/p1020si-post.dtsi174
-rw-r--r--arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi68
-rw-r--r--arch/powerpc/boot/dts/fsl/p1021si-post.dtsi225
-rw-r--r--arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi68
-rw-r--r--arch/powerpc/boot/dts/fsl/p1022si-post.dtsi235
-rw-r--r--arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi68
-rw-r--r--arch/powerpc/boot/dts/fsl/p1023si-post.dtsi224
-rw-r--r--arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi76
-rw-r--r--arch/powerpc/boot/dts/fsl/p2020si-post.dtsi194
-rw-r--r--arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi69
-rw-r--r--arch/powerpc/boot/dts/fsl/p2041si-post.dtsi325
-rw-r--r--arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi111
-rw-r--r--arch/powerpc/boot/dts/fsl/p3041si-post.dtsi352
-rw-r--r--arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi112
-rw-r--r--arch/powerpc/boot/dts/fsl/p3060si-post.dtsi296
-rw-r--r--arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi125
-rw-r--r--arch/powerpc/boot/dts/fsl/p4080si-post.dtsi350
-rw-r--r--arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi143
-rw-r--r--arch/powerpc/boot/dts/fsl/p5020si-post.dtsi355
-rw-r--r--arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi96
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi66
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi66
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi51
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi53
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi53
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi53
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi53
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi39
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi60
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi60
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi59
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi42
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi42
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi42
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi43
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi43
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi42
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi66
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi68
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi40
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi40
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi43
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi45
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi45
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi45
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi65
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi66
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi66
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi51
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi51
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi40
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi53
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi53
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi106
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi68
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi39
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi39
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi100
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi109
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi109
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi41
-rw-r--r--arch/powerpc/boot/dts/gef_ppc9a.dts4
-rw-r--r--arch/powerpc/boot/dts/gef_sbc310.dts4
-rw-r--r--arch/powerpc/boot/dts/gef_sbc610.dts4
-rw-r--r--arch/powerpc/boot/dts/klondike.dts227
-rw-r--r--arch/powerpc/boot/dts/kmeter1.dts2
-rw-r--r--arch/powerpc/boot/dts/kuroboxHD.dts4
-rw-r--r--arch/powerpc/boot/dts/kuroboxHG.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8308_p1m.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8308rdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8313erdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8315erdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc832x_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc832x_rdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitx.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8349emitxgp.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc834x_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc836x_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc836x_rdk.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8377_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8377_rdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8377_wlan.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8378_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8378_rdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8379_mds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8379_rdb.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8536ds.dts456
-rw-r--r--arch/powerpc/boot/dts/mpc8536ds.dtsi141
-rw-r--r--arch/powerpc/boot/dts/mpc8536ds_36b.dts410
-rw-r--r--arch/powerpc/boot/dts/mpc8540ads.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8541cds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8544ds.dts473
-rw-r--r--arch/powerpc/boot/dts/mpc8544ds.dtsi161
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts505
-rw-r--r--arch/powerpc/boot/dts/mpc8555cds.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts482
-rw-r--r--arch/powerpc/boot/dts/mpc8569mds.dts414
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds.dts757
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds.dtsi397
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds_36b.dts746
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts487
-rw-r--r--arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts245
-rw-r--r--arch/powerpc/boot/dts/mpc8610_hpcd.dts4
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts73
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts4
-rw-r--r--arch/powerpc/boot/dts/obs600.dts314
-rw-r--r--arch/powerpc/boot/dts/p1010rdb.dts228
-rw-r--r--arch/powerpc/boot/dts/p1010rdb.dtsi234
-rw-r--r--arch/powerpc/boot/dts/p1010rdb_36b.dts89
-rw-r--r--arch/powerpc/boot/dts/p1010si.dtsi374
-rw-r--r--arch/powerpc/boot/dts/p1020rdb.dts262
-rw-r--r--arch/powerpc/boot/dts/p1020rdb.dtsi247
-rw-r--r--arch/powerpc/boot/dts/p1020rdb_36b.dts66
-rw-r--r--arch/powerpc/boot/dts/p1020rdb_camp_core0.dts154
-rw-r--r--arch/powerpc/boot/dts/p1020rdb_camp_core1.dts11
-rw-r--r--arch/powerpc/boot/dts/p1020si.dtsi377
-rw-r--r--arch/powerpc/boot/dts/p1021mds.dts425
-rw-r--r--arch/powerpc/boot/dts/p1022ds.dts459
-rw-r--r--arch/powerpc/boot/dts/p1023rds.dts380
-rw-r--r--arch/powerpc/boot/dts/p2020ds.dts353
-rw-r--r--arch/powerpc/boot/dts/p2020ds.dtsi316
-rw-r--r--arch/powerpc/boot/dts/p2020rdb.dts71
-rw-r--r--arch/powerpc/boot/dts/p2020rdb_camp_core0.dts141
-rw-r--r--arch/powerpc/boot/dts/p2020rdb_camp_core1.dts107
-rw-r--r--arch/powerpc/boot/dts/p2020si.dtsi382
-rw-r--r--arch/powerpc/boot/dts/p2041rdb.dts22
-rw-r--r--arch/powerpc/boot/dts/p2041si.dtsi692
-rw-r--r--arch/powerpc/boot/dts/p3041ds.dts23
-rw-r--r--arch/powerpc/boot/dts/p3041si.dtsi729
-rw-r--r--arch/powerpc/boot/dts/p3060qds.dts12
-rw-r--r--arch/powerpc/boot/dts/p3060si.dtsi719
-rw-r--r--arch/powerpc/boot/dts/p4080ds.dts24
-rw-r--r--arch/powerpc/boot/dts/p4080si.dtsi755
-rw-r--r--arch/powerpc/boot/dts/p5020ds.dts24
-rw-r--r--arch/powerpc/boot/dts/p5020si.dtsi716
-rw-r--r--arch/powerpc/boot/dts/sbc8349.dts4
-rw-r--r--arch/powerpc/boot/dts/sbc8548.dts4
-rw-r--r--arch/powerpc/boot/dts/sbc8641d.dts4
-rw-r--r--arch/powerpc/boot/dts/socrates.dts4
-rw-r--r--arch/powerpc/boot/dts/storcenter.dts4
-rw-r--r--arch/powerpc/boot/dts/stxssa8555.dts4
-rw-r--r--arch/powerpc/boot/dts/tqm8540.dts4
-rw-r--r--arch/powerpc/boot/dts/tqm8541.dts4
-rw-r--r--arch/powerpc/boot/dts/tqm8548-bigflash.dts4
-rw-r--r--arch/powerpc/boot/dts/tqm8548.dts4
-rw-r--r--arch/powerpc/boot/dts/tqm8555.dts4
-rw-r--r--arch/powerpc/boot/dts/xcalibur1501.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5200.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5200_xmon.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5301.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5330.dts4
-rw-r--r--arch/powerpc/boot/dts/xpedite5370.dts4
-rw-r--r--arch/powerpc/boot/treeboot-currituck.c119
-rwxr-xr-xarch/powerpc/boot/wrapper45
-rw-r--r--arch/powerpc/configs/40x/klondike_defconfig55
-rw-r--r--arch/powerpc/configs/40x/obs600_defconfig83
-rw-r--r--arch/powerpc/configs/44x/currituck_defconfig110
-rw-r--r--arch/powerpc/configs/44x/iss476-smp_defconfig3
-rw-r--r--arch/powerpc/configs/chroma_defconfig307
-rw-r--r--arch/powerpc/configs/corenet32_smp_defconfig11
-rw-r--r--arch/powerpc/configs/corenet64_smp_defconfig4
-rw-r--r--arch/powerpc/configs/mpc85xx_defconfig17
-rw-r--r--arch/powerpc/configs/mpc85xx_smp_defconfig18
-rw-r--r--arch/powerpc/configs/ppc64_defconfig5
-rw-r--r--arch/powerpc/configs/ps3_defconfig39
-rw-r--r--arch/powerpc/configs/pseries_defconfig5
-rw-r--r--arch/powerpc/include/asm/Kbuild2
-rw-r--r--arch/powerpc/include/asm/cputable.h5
-rw-r--r--arch/powerpc/include/asm/cputime.h6
-rw-r--r--arch/powerpc/include/asm/fsl_ifc.h834
-rw-r--r--arch/powerpc/include/asm/fsl_lbc.h7
-rw-r--r--arch/powerpc/include/asm/hugetlb.h38
-rw-r--r--arch/powerpc/include/asm/kdump.h4
-rw-r--r--arch/powerpc/include/asm/kexec.h7
-rw-r--r--arch/powerpc/include/asm/lv1call.h10
-rw-r--r--arch/powerpc/include/asm/machdep.h3
-rw-r--r--arch/powerpc/include/asm/mmu-book3e.h11
-rw-r--r--arch/powerpc/include/asm/mmu-hash64.h7
-rw-r--r--arch/powerpc/include/asm/mpic.h14
-rw-r--r--arch/powerpc/include/asm/opal.h131
-rw-r--r--arch/powerpc/include/asm/paca.h1
-rw-r--r--arch/powerpc/include/asm/page.h90
-rw-r--r--arch/powerpc/include/asm/page_64.h2
-rw-r--r--arch/powerpc/include/asm/pci-bridge.h6
-rw-r--r--arch/powerpc/include/asm/pci.h2
-rw-r--r--arch/powerpc/include/asm/pgtable.h3
-rw-r--r--arch/powerpc/include/asm/processor.h3
-rw-r--r--arch/powerpc/include/asm/reg.h1
-rw-r--r--arch/powerpc/include/asm/reg_booke.h4
-rw-r--r--arch/powerpc/include/asm/rtas.h18
-rw-r--r--arch/powerpc/include/asm/rwsem.h132
-rw-r--r--arch/powerpc/include/asm/system.h11
-rw-r--r--arch/powerpc/include/asm/tce.h10
-rw-r--r--arch/powerpc/include/asm/time.h2
-rw-r--r--arch/powerpc/include/asm/types.h5
-rw-r--r--arch/powerpc/kernel/Makefile2
-rw-r--r--arch/powerpc/kernel/asm-offsets.c1
-rw-r--r--arch/powerpc/kernel/cpu_setup_a2.S10
-rw-r--r--arch/powerpc/kernel/cputable.c27
-rw-r--r--arch/powerpc/kernel/crash.c220
-rw-r--r--arch/powerpc/kernel/crash_dump.c4
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S2
-rw-r--r--arch/powerpc/kernel/head_44x.S107
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S2
-rw-r--r--arch/powerpc/kernel/idle.c27
-rw-r--r--arch/powerpc/kernel/idle_power7.S4
-rw-r--r--arch/powerpc/kernel/irq.c28
-rw-r--r--arch/powerpc/kernel/machine_kexec.c2
-rw-r--r--arch/powerpc/kernel/pci-common.c78
-rw-r--r--arch/powerpc/kernel/pci_dn.c3
-rw-r--r--arch/powerpc/kernel/process.c22
-rw-r--r--arch/powerpc/kernel/prom_init.c37
-rw-r--r--arch/powerpc/kernel/reloc_32.S208
-rw-r--r--arch/powerpc/kernel/rtas_flash.c6
-rw-r--r--arch/powerpc/kernel/rtasd.c7
-rw-r--r--arch/powerpc/kernel/setup_64.c10
-rw-r--r--arch/powerpc/kernel/smp.c3
-rw-r--r--arch/powerpc/kernel/sysfs.c10
-rw-r--r--arch/powerpc/kernel/time.c105
-rw-r--r--arch/powerpc/kernel/traps.c173
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S8
-rw-r--r--arch/powerpc/kvm/book3s_hv_rmhandlers.S3
-rw-r--r--arch/powerpc/lib/Makefile4
-rw-r--r--arch/powerpc/lib/copyuser_64.S6
-rw-r--r--arch/powerpc/lib/copyuser_power7.S683
-rw-r--r--arch/powerpc/lib/copyuser_power7_vmx.c50
-rw-r--r--arch/powerpc/mm/44x_mmu.c6
-rw-r--r--arch/powerpc/mm/Makefile2
-rw-r--r--arch/powerpc/mm/fault.c17
-rw-r--r--arch/powerpc/mm/hugetlbpage-book3e.c21
-rw-r--r--arch/powerpc/mm/hugetlbpage.c116
-rw-r--r--arch/powerpc/mm/icswx.c273
-rw-r--r--arch/powerpc/mm/icswx.h62
-rw-r--r--arch/powerpc/mm/icswx_pid.c87
-rw-r--r--arch/powerpc/mm/init_32.c7
-rw-r--r--arch/powerpc/mm/mem.c23
-rw-r--r--arch/powerpc/mm/mmap_64.c14
-rw-r--r--arch/powerpc/mm/mmu_context_hash64.c195
-rw-r--r--arch/powerpc/mm/numa.c4
-rw-r--r--arch/powerpc/mm/tlb_low_64e.S36
-rw-r--r--arch/powerpc/mm/tlb_nohash.c2
-rw-r--r--arch/powerpc/platforms/40x/Kconfig21
-rw-r--r--arch/powerpc/platforms/40x/ppc40x_simple.c4
-rw-r--r--arch/powerpc/platforms/44x/Kconfig14
-rw-r--r--arch/powerpc/platforms/44x/Makefile1
-rw-r--r--arch/powerpc/platforms/44x/currituck.c204
-rw-r--r--arch/powerpc/platforms/44x/iss4xx.c2
-rw-r--r--arch/powerpc/platforms/83xx/asp834x.c35
-rw-r--r--arch/powerpc/platforms/83xx/km83xx.c58
-rw-r--r--arch/powerpc/platforms/83xx/misc.c77
-rw-r--r--arch/powerpc/platforms/83xx/mpc830x_rdb.c40
-rw-r--r--arch/powerpc/platforms/83xx/mpc831x_rdb.c43
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_mds.c53
-rw-r--r--arch/powerpc/platforms/83xx/mpc832x_rdb.c56
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_itx.c30
-rw-r--r--arch/powerpc/platforms/83xx/mpc834x_mds.c42
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_mds.c53
-rw-r--r--arch/powerpc/platforms/83xx/mpc836x_rdk.c48
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_mds.c46
-rw-r--r--arch/powerpc/platforms/83xx/mpc837x_rdb.c47
-rw-r--r--arch/powerpc/platforms/83xx/mpc83xx.h16
-rw-r--r--arch/powerpc/platforms/83xx/sbc834x.c49
-rw-r--r--arch/powerpc/platforms/85xx/Makefile2
-rw-r--r--arch/powerpc/platforms/85xx/common.c66
-rw-r--r--arch/powerpc/platforms/85xx/corenet_ds.c28
-rw-r--r--arch/powerpc/platforms/85xx/ksi8560.c69
-rw-r--r--arch/powerpc/platforms/85xx/mpc8536_ds.c38
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx.h11
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c74
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_cds.c42
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ds.c50
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_mds.c73
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_rdb.c49
-rw-r--r--arch/powerpc/platforms/85xx/p1010rdb.c38
-rw-r--r--arch/powerpc/platforms/85xx/p1022_ds.c37
-rw-r--r--arch/powerpc/platforms/85xx/p1023_rds.c47
-rw-r--r--arch/powerpc/platforms/85xx/sbc8548.c43
-rw-r--r--arch/powerpc/platforms/85xx/sbc8560.c74
-rw-r--r--arch/powerpc/platforms/85xx/smp.c1
-rw-r--r--arch/powerpc/platforms/85xx/smp.h15
-rw-r--r--arch/powerpc/platforms/85xx/socrates.c33
-rw-r--r--arch/powerpc/platforms/85xx/stx_gp3.c73
-rw-r--r--arch/powerpc/platforms/85xx/tqm85xx.c73
-rw-r--r--arch/powerpc/platforms/85xx/xes_mpc85xx.c48
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c2
-rw-r--r--arch/powerpc/platforms/86xx/pic.c18
-rw-r--r--arch/powerpc/platforms/Kconfig6
-rw-r--r--arch/powerpc/platforms/Kconfig.cputype25
-rw-r--r--arch/powerpc/platforms/cell/iommu.c2
-rw-r--r--arch/powerpc/platforms/cell/setup.c25
-rw-r--r--arch/powerpc/platforms/chrp/setup.c3
-rw-r--r--arch/powerpc/platforms/embedded6xx/holly.c23
-rw-r--r--arch/powerpc/platforms/embedded6xx/linkstation.c20
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c24
-rw-r--r--arch/powerpc/platforms/embedded6xx/storcenter.c26
-rw-r--r--arch/powerpc/platforms/maple/pci.c55
-rw-r--r--arch/powerpc/platforms/maple/setup.c2
-rw-r--r--arch/powerpc/platforms/pasemi/setup.c4
-rw-r--r--arch/powerpc/platforms/powermac/pic.c80
-rw-r--r--arch/powerpc/platforms/powermac/setup.c8
-rw-r--r--arch/powerpc/platforms/powermac/smp.c6
-rw-r--r--arch/powerpc/platforms/powernv/Makefile2
-rw-r--r--arch/powerpc/platforms/powernv/opal-wrappers.S8
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c1330
-rw-r--r--arch/powerpc/platforms/powernv/pci-p5ioc2.c1
-rw-r--r--arch/powerpc/platforms/powernv/pci.c228
-rw-r--r--arch/powerpc/platforms/powernv/pci.h100
-rw-r--r--arch/powerpc/platforms/powernv/smp.c2
-rw-r--r--arch/powerpc/platforms/ps3/interrupt.c103
-rw-r--r--arch/powerpc/platforms/ps3/repository.c137
-rw-r--r--arch/powerpc/platforms/ps3/setup.c4
-rw-r--r--arch/powerpc/platforms/ps3/smp.c2
-rw-r--r--arch/powerpc/platforms/ps3/spu.c2
-rw-r--r--arch/powerpc/platforms/pseries/Kconfig9
-rw-r--r--arch/powerpc/platforms/pseries/Makefile1
-rw-r--r--arch/powerpc/platforms/pseries/hvCall_inst.c4
-rw-r--r--arch/powerpc/platforms/pseries/iommu.c61
-rw-r--r--arch/powerpc/platforms/pseries/lpar.c2
-rw-r--r--arch/powerpc/platforms/pseries/nvram.c7
-rw-r--r--arch/powerpc/platforms/pseries/processor_idle.c329
-rw-r--r--arch/powerpc/platforms/pseries/pseries.h3
-rw-r--r--arch/powerpc/platforms/pseries/setup.c109
-rw-r--r--arch/powerpc/platforms/pseries/smp.c1
-rw-r--r--arch/powerpc/platforms/wsp/Kconfig12
-rw-r--r--arch/powerpc/platforms/wsp/Makefile8
-rw-r--r--arch/powerpc/platforms/wsp/chroma.c56
-rw-r--r--arch/powerpc/platforms/wsp/h8.c134
-rw-r--r--arch/powerpc/platforms/wsp/opb_pic.c3
-rw-r--r--arch/powerpc/platforms/wsp/psr2.c56
-rw-r--r--arch/powerpc/platforms/wsp/wsp.c115
-rw-r--r--arch/powerpc/platforms/wsp/wsp.h16
-rwxr-xr-xarch/powerpc/relocs_check.pl14
-rw-r--r--arch/powerpc/sysdev/Makefile3
-rw-r--r--arch/powerpc/sysdev/fsl_ifc.c310
-rw-r--r--arch/powerpc/sysdev/fsl_lbc.c36
-rw-r--r--arch/powerpc/sysdev/fsl_msi.c99
-rw-r--r--arch/powerpc/sysdev/fsl_msi.h10
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c84
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c1519
-rw-r--r--arch/powerpc/sysdev/fsl_rio.h135
-rw-r--r--arch/powerpc/sysdev/fsl_rmu.c1104
-rw-r--r--arch/powerpc/sysdev/mpic.c201
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.c85
-rw-r--r--arch/powerpc/sysdev/ppc4xx_pci.h7
-rw-r--r--arch/powerpc/sysdev/xics/icp-hv.c47
-rw-r--r--arch/powerpc/sysdev/xics/xics-common.c2
-rw-r--r--arch/powerpc/xmon/xmon.c16
-rw-r--r--arch/sparc/kernel/sys_sparc_64.c6
-rw-r--r--drivers/net/ethernet/toshiba/ps3_gelic_net.c4
-rw-r--r--drivers/tty/serial/pmac_zilog.c423
-rw-r--r--drivers/tty/serial/pmac_zilog.h19
-rw-r--r--drivers/tty/serial/ucc_uart.c3
-rw-r--r--drivers/video/offb.c71
-rw-r--r--include/linux/cpuidle.h2
-rw-r--r--tools/perf/arch/powerpc/util/dwarf-regs.c3
388 files changed, 21757 insertions, 16278 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
new file mode 100644
index 00000000000..b9a8a2bcfae
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
@@ -0,0 +1,163 @@
+Message unit node:
+
+For SRIO controllers that implement the message unit as part of the controller
+this node is required. For devices with RMAN this node should NOT exist. The
+node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
+"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
+
+See srio.txt for more details about generic SRIO controller details.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - fsl,liodn
+ Usage: optional-but-recommended (for devices with PAMU)
+ Value type: <prop-encoded-array>
+ Definition: The logical I/O device number for the PAMU (IOMMU) to be
+ correctly configured for SRIO accesses. The property should
+ not exist on devices that do not support PAMU.
+
+ The LIODN value is associated with all RMU transactions
+ (msg-unit, doorbell, port-write).
+
+Sub-Nodes for RMU: The RMU node is composed of multiple sub-nodes that
+correspond to the actual sub-controllers in the RMU. The manual for a given
+SoC will detail which and how many of these sub-controllers are implemented.
+
+Message Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A pair of IRQs are specified in this property. The first
+ element is associated with the transmit (TX) interrupt and the
+ second element is associated with the receive (RX) interrupt.
+
+Doorbell Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include:
+ "fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A pair of IRQs are specified in this property. The first
+ element is associated with the transmit (TX) interrupt and the
+ second element is associated with the receive (RX) interrupt.
+
+Port-Write Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include:
+ "fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles port-write conditions is
+ specified by this property. (Typically shared with error).
+
+ Note: All other standard properties (see the ePAPR) are allowed
+ but are optional.
+
+Example:
+ rmu: rmu@d3000 {
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x400>;
+ ranges = <0x0 0xd3000 0x400>;
+ fsl,liodn = <0xc8>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
new file mode 100644
index 00000000000..b039bcbee13
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -0,0 +1,103 @@
+* Freescale Serial RapidIO (SRIO) Controller
+
+RapidIO port node:
+Properties:
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio" for IP blocks with IP Block
+ Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
+
+ Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
+ version in IP Block Revision Register and Y is Minor version. If this
+ compatiable is provided it should be ordered before "fsl,srio".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers. The size should
+ be set to 0x11000.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles error conditions is specified by this
+ property. (Typically shared with port-write).
+
+ - fsl,srio-rmu-handle:
+ Usage: required if rmu node is defined
+ Value type: <phandle>
+ Definition: A single <phandle> value that points to the RMU.
+ (See srio-rmu.txt for more details on RMU node binding)
+
+Port Child Nodes: There should a port child node for each port that exists in
+the controller. The ports are numbered starting at one (1) and should have
+the following properties:
+
+ - cell-index
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Matches the port id.
+
+ - ranges
+ Usage: required if local access windows preset
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Utilized to describe the memory mapped
+ IO space utilized by the controller. This corresponds to the
+ setting of the local access windows that are targeted to this
+ SRIO port.
+
+ - fsl,liodn
+ Usage: optional-but-recommended (for devices with PAMU)
+ Value type: <prop-encoded-array>
+ Definition: The logical I/O device number for the PAMU (IOMMU) to be
+ correctly configured for SRIO accesses. The property should
+ not exist on devices that do not support PAMU.
+
+ For HW (ie, the P4080) that only supports a LIODN for both
+ memory and maintenance transactions then a single LIODN is
+ represented in the property for both transactions.
+
+ For HW (ie, the P304x/P5020, etc) that supports an LIODN for
+ memory transactions and a unique LIODN for maintenance
+ transactions then a pair of LIODNs are represented in the
+ property. Within the pair, the first element represents the
+ LIODN associated with memory transactions and the second element
+ represents the LIODN associated with maintenance transactions
+ for the port.
+
+Note: All other standard properties (see ePAPR) are allowed but are optional.
+
+Example:
+
+ rapidio: rapidio@ffe0c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>; /* err_irq */
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ cell-index = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,liodn = <34>;
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+
+ port2 {
+ cell-index = <2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,liodn = <48>;
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0cc83fc1d8b..2747a7e9e7b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4011,7 +4011,7 @@ M: Josh Boyer <jwboyer@gmail.com>
M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
+T: git git://git.infradead.org/users/jwboyer/powerpc-4xx.git
S: Maintained
F: arch/powerpc/platforms/40x/
F: arch/powerpc/platforms/44x/
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ead0bc68439..692ac7588e2 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64
bool
default y if 64BIT
+config ARCH_HAS_CPU_IDLE_WAIT
+ bool
+ default y
+
config GENERIC_HWEIGHT
bool
default y
@@ -133,6 +137,7 @@ config PPC
select IRQ_PER_CPU
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
+ select IRQ_FORCED_THREADING
select HAVE_RCU_TABLE_FREE if SMP
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_BPF_JIT if (PPC64 && NET)
@@ -363,8 +368,9 @@ config KEXEC
config CRASH_DUMP
bool "Build a kdump crash kernel"
- depends on PPC64 || 6xx || FSL_BOOKE
- select RELOCATABLE if PPC64 || FSL_BOOKE
+ depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
+ select RELOCATABLE if PPC64 || 44x
+ select DYNAMIC_MEMSTART if FSL_BOOKE
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
@@ -685,6 +691,10 @@ config FSL_LBC
controller. Also contains some common code used by
drivers for specific local bus peripherals.
+config FSL_IFC
+ bool
+ depends on FSL_SOC
+
config FSL_GTM
bool
depends on PPC_83xx || QUICC_ENGINE || CPM2
@@ -770,6 +780,10 @@ source "drivers/rapidio/Kconfig"
endmenu
+config NONSTATIC_KERNEL
+ bool
+ default n
+
menu "Advanced setup"
depends on PPC32
@@ -819,13 +833,32 @@ config LOWMEM_CAM_NUM
int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
default 3
+config DYNAMIC_MEMSTART
+ bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
+ select NONSTATIC_KERNEL
+ help
+ This option enables the kernel to be loaded at any page aligned
+ physical address. The kernel creates a mapping from KERNELBASE to
+ the address where the kernel is loaded. The page size here implies
+ the TLB page size of the mapping for kernel on the particular platform.
+ Please refer to the init code for finding the TLB page size.
+
+ DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
+ kernel image, where the only restriction is the page aligned kernel
+ load address. When this option is enabled, the compile time physical
+ address CONFIG_PHYSICAL_START is ignored.
+
+ This option is overridden by CONFIG_RELOCATABLE
+
config RELOCATABLE
bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
+ depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
+ select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running at the
- location the kernel is loaded at (some alignment restrictions may
- exist).
+ location the kernel is loaded at, without any alignment restrictions.
+ This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
One use is for the kexec on panic case where the recovery kernel
must live at a different physical address than the primary
@@ -835,7 +868,11 @@ config RELOCATABLE
it has been loaded at and the compile time physical addresses
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
setting can still be useful to bootwrappers that need to know the
- load location of the kernel (eg. u-boot/mkimage).
+ load address of the kernel (eg. u-boot/mkimage).
+
+config RELOCATABLE_PPC32
+ def_bool y
+ depends on PPC32 && RELOCATABLE
config PAGE_OFFSET_BOOL
bool "Set custom page offset address"
@@ -865,7 +902,7 @@ config KERNEL_START_BOOL
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default PAGE_OFFSET if PAGE_OFFSET_BOOL
- default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
+ default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
default "0xc0000000"
config PHYSICAL_START_BOOL
@@ -878,7 +915,7 @@ config PHYSICAL_START_BOOL
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
- default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
+ default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
default "0x00000000"
config PHYSICAL_ALIGN
@@ -924,6 +961,7 @@ endmenu
if PPC64
config RELOCATABLE
bool "Build a relocatable kernel"
+ select NONSTATIC_KERNEL
help
This builds a kernel image that is capable of running anywhere
in the RMA (real memory area) at any 16k-aligned base address.
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 1b8a9c905cf..4ccb2a009f7 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -336,4 +336,16 @@ config PPC_EARLY_DEBUG_CPM_ADDR
platform probing is done, all platforms selected must
share the same address.
+config STRICT_DEVMEM
+ def_bool y
+ prompt "Filter access to /dev/mem"
+ help
+ This option restricts access to /dev/mem. If this option is
+ disabled, you allow userspace access to all memory, including
+ kernel and userspace memory. Accidental memory access is likely
+ to be disastrous.
+ Memory access is required for experts who want to debug the kernel.
+
+ If you are unsure, say Y.
+
endmenu
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 70ba0c0a122..b8b105c01c6 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -63,9 +63,9 @@ override CC += -m$(CONFIG_WORD_SIZE)
override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
endif
-LDFLAGS_vmlinux-yy := -Bstatic
-LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
-LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy)
+LDFLAGS_vmlinux-y := -Bstatic
+LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
+LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
@@ -131,8 +131,7 @@ KBUILD_CFLAGS += -mno-sched-epilog
endif
cpu-as-$(CONFIG_4xx) += -Wa,-m405
-cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
+cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
cpu-as-$(CONFIG_E500) += -Wa,-me500
cpu-as-$(CONFIG_E200) += -Wa,-me200
@@ -166,7 +165,7 @@ all: zImage
# With make 3.82 we cannot mix normal and wildcard targets
BOOT_TARGETS1 := zImage zImage.initrd uImage
-BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
+BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 72ee8c1fba4..15986e70799 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
@@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
+ gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
+ treeboot-currituck.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -199,6 +201,7 @@ image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
image-$(CONFIG_WALNUT) += treeImage.walnut
image-$(CONFIG_ACADIA) += cuImage.acadia
+image-$(CONFIG_OBS600) += uImage.obs600
# Board ports in arch/powerpc/platform/44x/Kconfig
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
@@ -212,6 +215,7 @@ image-$(CONFIG_WARP) += cuImage.warp
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK) += treeImage.currituck
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
@@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
+$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
+
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 645a7c964e5..cc73f7a95e2 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -9,6 +9,12 @@
})
#define mtdcr(rn, val) \
asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
+#define mfdcrx(rn) \
+ ({ \
+ unsigned long rval; \
+ asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
+ rval; \
+ })
/* 440GP/440GX SDRAM controller DCRs */
#define DCRN_SDRAM0_CFGADDR 0x010
diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index d271ab54267..bbcb8a4cc12 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -57,3 +57,55 @@ __div64_32:
stw r8,4(r3)
mr r3,r6 # return the remainder in r3
blr
+
+/*
+ * Extended precision shifts.
+ *
+ * Updated to be valid for shift counts from 0 to 63 inclusive.
+ * -- Gabriel
+ *
+ * R3/R4 has 64 bit value
+ * R5 has shift count
+ * result in R3/R4
+ *
+ * ashrdi3: arithmetic right shift (sign propagation)
+ * lshrdi3: logical right shift
+ * ashldi3: left shift
+ */
+ .globl __ashrdi3
+__ashrdi3:
+ subfic r6,r5,32
+ srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
+ addi r7,r5,32 # could be xori, or addi with -32
+ slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
+ rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
+ sraw r7,r3,r7 # t2 = MSW >> (count-32)
+ or r4,r4,r6 # LSW |= t1
+ slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
+ sraw r3,r3,r5 # MSW = MSW >> count
+ or r4,r4,r7 # LSW |= t2
+ blr
+
+ .globl __ashldi3
+__ashldi3:
+ subfic r6,r5,32
+ slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
+ addi r7,r5,32 # could be xori, or addi with -32
+ srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
+ slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
+ or r3,r3,r6 # MSW |= t1
+ slw r4,r4,r5 # LSW = LSW << count
+ or r3,r3,r7 # MSW |= t2
+ blr
+
+ .globl __lshrdi3
+__lshrdi3:
+ subfic r6,r5,32
+ srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
+ addi r7,r5,32 # could be xori, or addi with -32
+ slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
+ srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
+ or r4,r4,r6 # LSW |= t1
+ srw r3,r3,r5 # MSW = MSW >> count
+ or r4,r4,r7 # LSW |= t2
+ blr
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 261d10c4534..227290db866 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -256,7 +256,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <400000000>;
interrupts = <9 0x8>;
@@ -266,7 +266,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <400000000>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
new file mode 100644
index 00000000000..b801dd06e57
--- /dev/null
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -0,0 +1,237 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000; // spin table
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "ibm,currituck";
+ compatible = "ibm,currituck";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <0>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <1>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x01f00000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00040000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ plb {
+ compatible = "ibm,plb6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-frequency = <200000000>; // 200Mhz
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full
+ * 32-bit range
+ */
+ ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+ 0x80000000 0x00000200 0x80000000 0x80000000>;
+ clock-frequency = <100000000>;
+
+ UART0: serial@10000000 {
+ device_type = "serial";
+ compatible = "ns16750", "ns16550";
+ reg = <0x10000000 0x00000008>;
+ virtual-reg = <0xe1000000>;
+ clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+ current-speed = <115200>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <34 2>;
+ };
+
+ IIC0: i2c@00000000 {
+ compatible = "ibm,iic-currituck", "ibm,iic";
+ reg = <0x0 0x00000014>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <79 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80", "m41st85";
+ reg = <0x68>;
+ };
+ };
+ };
+
+ PCIE0: pciex@10100000000 { // 4xGBIF1
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x80 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+ };
+
+ PCIE1: pciex@30100000000 { // 4xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x60 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+ };
+
+ PCIE2: pciex@38100000000 { // 2xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xA0 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
new file mode 100644
index 00000000000..89af6263770
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -0,0 +1,248 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8536-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8536-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ /* mark compat w/8572 to get some erratum treatment */
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ sata@18000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+ };
+
+ sata@19000 {
+ compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8536-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ usb@22000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+ };
+
+ usb@23000 {
+ compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+ };
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+ usb@2b000 {
+ compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+ reg = <0x2b000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <60 0x2 0 0>;
+ };
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8536-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
new file mode 100644
index 00000000000..7de45a784df
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8536 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8536";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8536@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
new file mode 100644
index 00000000000..b68eb119fae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi
@@ -0,0 +1,191 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci3 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <27 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <27 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8544-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8544-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8544-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8544-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2, 256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+
+ ethernet@26000 {
+ cell-index = <1>;
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8544-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
new file mode 100644
index 00000000000..8777f9239d9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi
@@ -0,0 +1,63 @@
+/*
+ * MPC8544 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8544";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8544@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
new file mode 100644
index 00000000000..9d8023a69d7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi
@@ -0,0 +1,143 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <25 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8548-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8548-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8548-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8548-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+
+/include/ "pq3-sec2.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
new file mode 100644
index 00000000000..289f1218d75
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi
@@ -0,0 +1,62 @@
+/*
+ * MPC8548 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8548";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
new file mode 100644
index 00000000000..64e7075a9cd
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi
@@ -0,0 +1,270 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
+ interrupts = <19 2 0 0>;
+ sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupts = <24 0x2 0 0>;
+ bus-range = <0 0xff>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ sleep = <&pmc 0x80000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+ sleep = <&pmc 0x20000000>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8568-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8568-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8568-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ i2c-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+ };
+
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8568-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+ dma@21300 {
+ sleep = <&pmc 0x00000400>;
+ };
+
+/include/ "pq3-etsec1-0.dtsi"
+ ethernet@24000 {
+ sleep = <&pmc 0x00000080>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+ ethernet@25000 {
+ sleep = <&pmc 0x00000040>;
+ };
+
+ par_io@e0100 {
+ reg = <0xe0100 0x100>;
+ device_type = "par_io";
+ };
+
+/include/ "pq3-sec2.1-0.dtsi"
+ crypto@30000 {
+ sleep = <&pmc 0x01000000>;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
+
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
+ fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8568-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ sleep = <&pmc 0x00000800>;
+ brg-frequency = <0>;
+ bus-frequency = <396000000>;
+ fsl,qe-num-riscs = <2>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ };
+
+ spi@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3000 {
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x10000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x10000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
new file mode 100644
index 00000000000..eacd62c5fe6
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi
@@ -0,0 +1,65 @@
+/*
+ * MPC8568 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8568";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8568@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
new file mode 100644
index 00000000000..3e6346a4a18
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi
@@ -0,0 +1,304 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+ sleep = <&pmc 0x08000000>;
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+ sleep = <&pmc 0x20000000>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8569-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8569-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ i2c-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+
+ };
+
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+/include/ "pq3-duart-0.dtsi"
+
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8569-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ sleep = <&pmc 0x00200000>;
+ };
+
+ par_io@e0100 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xe0100 0x100>;
+ ranges = <0x0 0xe0100 0x100>;
+ device_type = "par_io";
+ };
+
+/include/ "pq3-sec3.1-0.dtsi"
+ crypto@30000 {
+ sleep = <&pmc 0x01000000>;
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
+
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
+ reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
+ fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8569-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ sleep = <&pmc 0x00000800>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ fsl,qe-num-riscs = <4>;
+ fsl,qe-num-snums = <46>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ timer@440 {
+ compatible = "fsl,mpc8569-qe-gtm",
+ "fsl,qe-gtm", "fsl,gtm";
+ reg = <0x440 0x40>;
+ interrupts = <12 13 14 15>;
+ interrupt-parent = <&qeic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ spi@4c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
+ reg = <0x4c0 0x40>;
+ cell-index = <0>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ };
+
+ spi@500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ };
+
+ usb@6c0 {
+ compatible = "fsl,mpc8569-qe-usb",
+ "fsl,mpc8323-qe-usb";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3000 {
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3200 {
+ cell-index = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3400 {
+ cell-index = <6>;
+ reg = <0x3400 0x200>;
+ interrupts = <41>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@3600 {
+ cell-index = <8>;
+ reg = <0x3600 0x200>;
+ interrupts = <43>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x20000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x20000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
new file mode 100644
index 00000000000..b07064d1193
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * MPC8569 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8569";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8569@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 00000000000..d44e25a4873
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2,1M
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 00000000000..ca188326c2c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
new file mode 100644
index 00000000000..bd9e163c764
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -0,0 +1,198 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1010-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1010-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1010-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ can0: can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2 0 0>;
+ };
+
+ can1: can@1d000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1d000 0x1000>;
+ interrupts = <61 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1010-l2-cache-controller",
+ "fsl,p1014-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec4.4-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: ethernet@b2000 {
+ queue-group@b2000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ };
+
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1010-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
new file mode 100644
index 00000000000..7354a8f90ea
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi
@@ -0,0 +1,64 @@
+/*
+ * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1010";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ can0 = &can0;
+ can1 = &can1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1010@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
new file mode 100644
index 00000000000..fc924c5ffeb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -0,0 +1,174 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
new file mode 100644
index 00000000000..6f0376e554e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
new file mode 100644
index 00000000000..38ba54d1e32
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
@@ -0,0 +1,225 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1021-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1021-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1021-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1021-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.3-0.dtsi"
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+/include/ "pq3-etsec2-2.dtsi"
+ enet2: enet2_grp2: ethernet@b2000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1021-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
+
+&qe {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+ };
+
+ ucc@2400 {
+ cell-index = <5>;
+ reg = <0x2400 0x200>;
+ interrupts = <40>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
+/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
new file mode 100644
index 00000000000..4abd54bc330
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1021";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1021@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1021@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 00000000000..16239b199d0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1022-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1022-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1022-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1022-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+ dma@c300 {
+ dma00: dma-channel@0 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ dma01: dma-channel@80 {
+ compatible = "fsl,ssi-dma-channel";
+ };
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ display@10000 {
+ compatible = "fsl,diu", "fsl,p1022-diu";
+ reg = <0x10000 1000>;
+ interrupts = <64 2 0 0>;
+ };
+
+ ssi@15000 {
+ compatible = "fsl,mpc8610-ssi";
+ cell-index = <0>;
+ reg = <0x15000 0x100>;
+ interrupts = <75 2 0 0>;
+ fsl,playback-dma = <&dma00>;
+ fsl,capture-dma = <&dma01>;
+ fsl,fifo-depth = <15>;
+ };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1022-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+ enet0: enet0_grp2: ethernet@b0000 {
+ };
+
+/include/ "pq3-etsec2-1.dtsi"
+ enet1: enet1_grp2: ethernet@b1000 {
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1022-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ power@e0070{
+ compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+ reg = <0xe0070 0x20>;
+ };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
new file mode 100644
index 00000000000..e930f4f7ca8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi
@@ -0,0 +1,68 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1022";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1022@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1022@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
new file mode 100644
index 00000000000..b06bb4cc1fe
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
@@ -0,0 +1,224 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+ compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 0 0>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1023-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1023-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1023-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+
+/include/ "pq3-espi-0.dtsi"
+ spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1023-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+
+ crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ ranges = <0 0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <57 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+ };
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p1023-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
new file mode 100644
index 00000000000..ac45f6d9338
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi
@@ -0,0 +1,76 @@
+/*
+ * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P1023";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1023@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1023@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
new file mode 100644
index 00000000000..c041050561a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -0,0 +1,194 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x8000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
+ };
+
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-esdhc-0.dtsi"
+/include/ "pq3-sec3.1-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
new file mode 100644
index 00000000000..3213288641d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi
@@ -0,0 +1,69 @@
+/*
+ * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
new file mode 100644
index 00000000000..234a399ddeb
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -0,0 +1,325 @@
+/*
+ * P2041/P2040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p2041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
new file mode 100644
index 00000000000..2d0a40d6b10
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -0,0 +1,111 @@
+/*
+ * P2041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P2041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
new file mode 100644
index 00000000000..d41d08de7f7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -0,0 +1,352 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000>;
+ interrupts = <16 2 1 27>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3041-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
new file mode 100644
index 00000000000..136def3536b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -0,0 +1,112 @@
+/*
+ * P3041 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3041";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
new file mode 100644
index 00000000000..a63edd195ae
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
@@ -0,0 +1,296 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p3060-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p3060-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.1-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
new file mode 100644
index 00000000000..00c8e70e7b9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
@@ -0,0 +1,125 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P3060";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
new file mode 100644
index 00000000000..8d35d2c1f69
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -0,0 +1,350 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@42000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu2>;
+ reg = <0x42000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@43000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu3>;
+ reg = <0x43000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@44000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu4>;
+ reg = <0x44000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@45000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu5>;
+ reg = <0x45000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@46000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu6>;
+ reg = <0x46000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@47000 {
+ compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu7>;
+ reg = <0x47000 0x1000>;
+ };
+
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x5000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p4080-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ voltage-ranges = <3300 3300>;
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
new file mode 100644
index 00000000000..b9556ee3a63
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -0,0 +1,143 @@
+/*
+ * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P4080";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e500mc@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e500mc@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu2: PowerPC,e500mc@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu3: PowerPC,e500mc@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu4: PowerPC,e500mc@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu5: PowerPC,e500mc@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu6: PowerPC,e500mc@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu7: PowerPC,e500mc@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
new file mode 100644
index 00000000000..914074b91a8
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -0,0 +1,355 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <25 2 0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 15>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 15>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 14>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 14>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1 0 0
+ 0000 0 0 2 &mpic 5 1 0 0
+ 0000 0 0 3 &mpic 6 1 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x202000 */
+&pci2 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 13>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 13>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 1 0 0
+ >;
+ };
+};
+
+/* controller at 0x203000 */
+&pci3 {
+ compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0x0 0xff>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 1 12>;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <16 2 1 12>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 43 1 0 0
+ 0000 0 0 2 &mpic 0 1 0 0
+ 0000 0 0 3 &mpic 4 1 0 0
+ 0000 0 0 4 &mpic 8 1 0 0
+ >;
+ };
+};
+
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
+&dcsr {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,dcsr", "simple-bus";
+
+ dcsr-epu@0 {
+ compatible = "fsl,dcsr-epu";
+ interrupts = <52 2 0 0
+ 84 2 0 0
+ 85 2 0 0>;
+ reg = <0x0 0x1000>;
+ };
+ dcsr-npc {
+ compatible = "fsl,dcsr-npc";
+ reg = <0x1000 0x1000 0x1000000 0x8000>;
+ };
+ dcsr-nxc@2000 {
+ compatible = "fsl,dcsr-nxc";
+ reg = <0x2000 0x1000>;
+ };
+ dcsr-corenet {
+ compatible = "fsl,dcsr-corenet";
+ reg = <0x8000 0x1000 0xB0000 0x1000>;
+ };
+ dcsr-dpaa@9000 {
+ compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+ reg = <0x9000 0x1000>;
+ };
+ dcsr-ocn@11000 {
+ compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+ reg = <0x11000 0x1000>;
+ };
+ dcsr-ddr@12000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr1>;
+ reg = <0x12000 0x1000>;
+ };
+ dcsr-ddr@13000 {
+ compatible = "fsl,dcsr-ddr";
+ dev-handle = <&ddr2>;
+ reg = <0x13000 0x1000>;
+ };
+ dcsr-nal@18000 {
+ compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+ reg = <0x18000 0x1000>;
+ };
+ dcsr-rcpm@22000 {
+ compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+ reg = <0x22000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@40000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu0>;
+ reg = <0x40000 0x1000>;
+ };
+ dcsr-cpu-sb-proxy@41000 {
+ compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+ cpu-handle = <&cpu1>;
+ reg = <0x41000 0x1000>;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+
+ soc-sram-error {
+ compatible = "fsl,soc-sram-error";
+ interrupts = <16 2 1 29>;
+ };
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ ddr1: memory-controller@8000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupts = <16 2 1 23>;
+ };
+
+ ddr2: memory-controller@9000 {
+ compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupts = <16 2 1 22>;
+ };
+
+ cpc: l3-cache-controller@10000 {
+ compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+ reg = <0x10000 0x1000
+ 0x11000 0x1000>;
+ interrupts = <16 2 1 27
+ 16 2 1 26>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ interrupts = <16 2 1 31>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,pamu-v1.0", "fsl,pamu";
+ reg = <0x20000 0x4000>;
+ interrupts = <
+ 24 2 0 0
+ 16 2 1 30>;
+ };
+
+/include/ "qoriq-mpic.dtsi"
+
+ guts: global-utilities@e0000 {
+ compatible = "fsl,qoriq-device-config-1.0";
+ reg = <0xe0000 0xe00>;
+ fsl,has-rstcr;
+ #sleep-cells = <1>;
+ fsl,liodn-bits = <12>;
+ };
+
+ pins: global-utilities@e0e00 {
+ compatible = "fsl,qoriq-pin-control-1.0";
+ reg = <0xe0e00 0x200>;
+ #sleep-cells = <2>;
+ };
+
+ clockgen: global-utilities@e1000 {
+ compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+ reg = <0xe1000 0x1000>;
+ clock-frequency = <0>;
+ };
+
+ rcpm: global-utilities@e2000 {
+ compatible = "fsl,qoriq-rcpm-1.0";
+ reg = <0xe2000 0x1000>;
+ #sleep-cells = <1>;
+ };
+
+ sfp: sfp@e8000 {
+ compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+ reg = <0xe8000 0x1000>;
+ };
+
+ serdes: serdes@ea000 {
+ compatible = "fsl,p5020-serdes";
+ reg = <0xea000 0x1000>;
+ };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+ spi@110000 {
+ fsl,espi-num-chipselects = <4>;
+ };
+
+/include/ "qoriq-esdhc-0.dtsi"
+ sdhc@114000 {
+ sdhci,auto-cmd12;
+ };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+ usb0: usb@210000 {
+ phy_type = "utmi";
+ port0;
+ };
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+ usb1: usb@211000 {
+ dr_mode = "host";
+ phy_type = "utmi";
+ };
+
+/include/ "qoriq-sata2-0.dtsi"
+/include/ "qoriq-sata2-1.dtsi"
+/include/ "qoriq-sec4.2-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
new file mode 100644
index 00000000000..ae823a47584
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -0,0 +1,96 @@
+/*
+ * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,P5020";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ ccsr = &soc;
+ dcsr = &dcsr;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ pci3 = &pci3;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+ msi0 = &msi0;
+ msi1 = &msi1;
+ msi2 = &msi2;
+
+ crypto = &crypto;
+ sec_jr0 = &sec_jr0;
+ sec_jr1 = &sec_jr1;
+ sec_jr2 = &sec_jr2;
+ sec_jr3 = &sec_jr3;
+ rtic_a = &rtic_a;
+ rtic_b = &rtic_b;
+ rtic_c = &rtic_c;
+ rtic_d = &rtic_d;
+ sec_mon = &sec_mon;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,e5500@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ cpu1: PowerPC,e5500@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ next-level-cache = <&cpc>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
new file mode 100644
index 00000000000..b5b37ad30e7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <20 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <21 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <22 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <23 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
new file mode 100644
index 00000000000..28cb8a55d80
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <79 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
new file mode 100644
index 00000000000..5e268fdb9d1
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
+
+serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
new file mode 100644
index 00000000000..5743433e278
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc@2e000 {
+ compatible = "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2 0 0>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
new file mode 100644
index 00000000000..75854b2e039
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@7000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
new file mode 100644
index 00000000000..a1979ae334a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+};
+
+mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
new file mode 100644
index 00000000000..4c4fdde1ec2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+};
+
+mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
new file mode 100644
index 00000000000..4b8ab438668
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+};
+
+mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
new file mode 100644
index 00000000000..40c9137729a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi
@@ -0,0 +1,53 @@
+/*
+ * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ ranges = <0x0 0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
+};
+
+mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
new file mode 100644
index 00000000000..efe2ca04bce
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+ptp_clock@24e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
new file mode 100644
index 00000000000..1382fec9e8c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+};
+
+ethernet@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
new file mode 100644
index 00000000000..221cd2ea5b3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi
@@ -0,0 +1,60 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+mdio@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
new file mode 100644
index 00000000000..61456c31760
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi
@@ -0,0 +1,59 @@
+/*
+ * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mdio@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x26000 0x1000 0xb1030 0x4>;
+};
+
+ethernet@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ fsl,magic-packet;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+
+ queue-group@b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
new file mode 100644
index 00000000000..034ab8fac22
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet0_grp2 {
+ queue-group@b4000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
new file mode 100644
index 00000000000..3be9ba3b374
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet1_grp2 {
+ queue-group@b5000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
new file mode 100644
index 00000000000..02a33457048
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&enet2_grp2 {
+ queue-group@b6000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
new file mode 100644
index 00000000000..72a3ef5945c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,pq3-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2 0 0>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
new file mode 100644
index 00000000000..d1dd6fb82a7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
new file mode 100644
index 00000000000..a9bd803e209
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
new file mode 100644
index 00000000000..8734cffae1a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -0,0 +1,42 @@
+/*
+ * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
new file mode 100644
index 00000000000..5c804606584
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -0,0 +1,66 @@
+/*
+ * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic";
+ device_type = "open-pic";
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
new file mode 100644
index 00000000000..587ca9ffad7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
new file mode 100644
index 00000000000..3c28dd08d38
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@18000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x18000 0x1000>;
+ cell-index = <1>;
+ interrupts = <74 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
new file mode 100644
index 00000000000..eefaf2855e3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi
@@ -0,0 +1,40 @@
+/*
+ * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@19000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x19000 0x1000>;
+ cell-index = <2>;
+ interrupts = <41 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
new file mode 100644
index 00000000000..02a5c7ae72d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi
@@ -0,0 +1,43 @@
+/*
+ * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xfe>;
+ fsl,descriptor-types-mask = <0x12b0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
new file mode 100644
index 00000000000..bba1ba44ccf
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
new file mode 100644
index 00000000000..8f0a5669bee
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
new file mode 100644
index 00000000000..c227f2748a2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi
@@ -0,0 +1,45 @@
+/*
+ * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+ "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 0 0 58 2 0 0>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x97c>;
+ fsl,descriptor-types-mask = <0x3a30abf>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
new file mode 100644
index 00000000000..bf957a7fca2
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi
@@ -0,0 +1,65 @@
+/*
+ * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto@30000 {
+ compatible = "fsl,sec4.4", "fsl,sec4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000 0x10000>;
+ interrupts = <58 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <45 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
new file mode 100644
index 00000000000..185ab9dc3ec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@22000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <28 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
new file mode 100644
index 00000000000..fe24cd612ff
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <46 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
new file mode 100644
index 00000000000..1aebf3ea4ca
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
new file mode 100644
index 00000000000..ecf5e180fe7
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi
@@ -0,0 +1,66 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
new file mode 100644
index 00000000000..225c07b4e8a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
+
+serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
new file mode 100644
index 00000000000..d23233a56b9
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi
@@ -0,0 +1,51 @@
+/*
+ * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
+
+serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
new file mode 100644
index 00000000000..20835ae216c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi
@@ -0,0 +1,40 @@
+/*
+ * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sdhc: sdhc@114000 {
+ compatible = "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2 0 0>;
+ clock-frequency = <0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
new file mode 100644
index 00000000000..6db06975e09
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+spi@110000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc8536-espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
new file mode 100644
index 00000000000..cf714f5f68b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+gpio0: gpio@130000 {
+ compatible = "fsl,qoriq-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2 0 0>;
+ #gpio-cells = <2>;
+ gpio-controller;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
new file mode 100644
index 00000000000..5f9bf7debe4
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
+
+i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
new file mode 100644
index 00000000000..7989bf5eeb5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi
@@ -0,0 +1,53 @@
+/*
+ * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
+
+i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2 0 0>;
+ dfsrr;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
new file mode 100644
index 00000000000..b9bada6a87d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi
@@ -0,0 +1,106 @@
+/*
+ * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <4>;
+ reg = <0x40000 0x40000>;
+ compatible = "fsl,mpic", "chrp,open-pic";
+ device_type = "open-pic";
+ clock-frequency = <0x0>;
+};
+
+timer@41100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x41100 0x100 0x41300 4>;
+ interrupts = <0 0 3 0
+ 1 0 3 0
+ 2 0 3 0
+ 3 0 3 0>;
+};
+
+msi0: msi@41600 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41600 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
+};
+
+msi1: msi@41800 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41800 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe8 0 0 0
+ 0xe9 0 0 0
+ 0xea 0 0 0
+ 0xeb 0 0 0
+ 0xec 0 0 0
+ 0xed 0 0 0
+ 0xee 0 0 0
+ 0xef 0 0 0>;
+};
+
+msi2: msi@41a00 {
+ compatible = "fsl,mpic-msi";
+ reg = <0x41a00 0x200>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xf0 0 0 0
+ 0xf1 0 0 0
+ 0xf2 0 0 0
+ 0xf3 0 0 0
+ 0xf4 0 0 0
+ 0xf5 0 0 0
+ 0xf6 0 0 0
+ 0xf7 0 0 0>;
+};
+
+timer@42100 {
+ compatible = "fsl,mpic-global-timer";
+ reg = <0x42100 0x100 0x42300 4>;
+ interrupts = <4 0 3 0
+ 5 0 3 0
+ 6 0 3 0
+ 7 0 3 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
new file mode 100644
index 00000000000..ca7fec792e5
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi
@@ -0,0 +1,68 @@
+/*
+ * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
new file mode 100644
index 00000000000..b642047fdec
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@220000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x220000 0x1000>;
+ interrupts = <68 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
new file mode 100644
index 00000000000..c5737025975
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi
@@ -0,0 +1,39 @@
+/*
+ * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+sata@221000 {
+ compatible = "fsl,pq-sata-v2";
+ reg = <0x221000 0x1000>;
+ interrupts = <69 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
new file mode 100644
index 00000000000..0cbbac32953
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi
@@ -0,0 +1,100 @@
+/*
+ * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
new file mode 100644
index 00000000000..3308986bba0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.1-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.1-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.1-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.1-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
new file mode 100644
index 00000000000..7990e0d3d6f
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi
@@ -0,0 +1,109 @@
+/*
+ * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+crypto: crypto@300000 {
+ compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x300000 0x10000>;
+ ranges = <0 0x300000 0x10000>;
+ interrupts = <92 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <88 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <89 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <90 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ compatible = "fsl,sec-v4.2-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x4000 0x1000>;
+ interrupts = <91 2 0 0>;
+ };
+
+ rtic@6000 {
+ compatible = "fsl,sec-v4.2-rtic",
+ "fsl,sec-v4.0-rtic";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6000 0x100>;
+ ranges = <0x0 0x6100 0xe00>;
+
+ rtic_a: rtic-a@0 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x00 0x20 0x100 0x80>;
+ };
+
+ rtic_b: rtic-b@20 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x20 0x20 0x200 0x80>;
+ };
+
+ rtic_c: rtic-c@40 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x40 0x20 0x300 0x80>;
+ };
+
+ rtic_d: rtic-d@60 {
+ compatible = "fsl,sec-v4.2-rtic-memory",
+ "fsl,sec-v4.0-rtic-memory";
+ reg = <0x60 0x20 0x500 0x80>;
+ };
+ };
+};
+
+sec_mon: sec_mon@314000 {
+ compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
+ reg = <0x314000 0x1000>;
+ interrupts = <93 2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
new file mode 100644
index 00000000000..4dd6f84c239
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@211000 {
+ compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <45 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
new file mode 100644
index 00000000000..f053835aa1c
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi
@@ -0,0 +1,41 @@
+/*
+ * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+usb@210000 {
+ compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <44 0x2 0 0>;
+};
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 2266bbb303d..38dcb96c8e2 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -339,7 +339,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
@@ -349,7 +349,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 429e87d9ace..5ab8932d09b 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -337,7 +337,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
@@ -347,7 +347,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index d81201ac2ca..d5341f5741a 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -337,7 +337,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
@@ -347,7 +347,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts
new file mode 100644
index 00000000000..8c942903361
--- /dev/null
+++ b/arch/powerpc/boot/dts/klondike.dts
@@ -0,0 +1,227 @@
+/*
+ * Device Tree for Klondike (APM8018X) board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Tanmay Inamdar <tinamdar@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "apm,klondike";
+ compatible = "apm,klondike";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,apm8018x";
+ reg = <0x00000000>;
+ clock-frequency = <300000000>; /* Filled in by U-Boot */
+ timebase-frequency = <300000000>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x010>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ plb {
+ compatible = "ibm,plb4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-apm8018x";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <16>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = </*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x1 0x4
+ /*TXDE*/ 0x2 0x4
+ /*RXDE*/ 0x3 0x4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x20000000 0x20000000 0x30000000
+ 0x50000000 0x50000000 0x10000000
+ 0x60000000 0x60000000 0x10000000
+ 0xFE000000 0xFE000000 0x00010000>;
+ dcr-reg = <0x100 0x020>;
+ clock-frequency = <300000000>; /* Filled in by U-Boot */
+
+ RGMII0: emac-rgmii@400a2000 {
+ compatible = "ibm,rgmii";
+ reg = <0x400a2000 0x00000010>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@400a3000 {
+ compatible = "ibm,tah";
+ reg = <0x400a3000 0x100>;
+ };
+
+ TAH1: emac-tah@400a4000 {
+ compatible = "ibm,tah";
+ reg = <0x400a4000 0x100>;
+ };
+
+ EMAC0: ethernet@400a0000 {
+ compatible = "ibm,emac4", "ibm-emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
+ reg = <0x400a0000 0x00000100>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0x0>;
+ mal-rx-channel = <0x0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-address = <0x2>;
+ turbo = "no";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@400a1000 {
+ compatible = "ibm,emac4", "ibm-emac4sync";
+ status = "disabled";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
+ reg = <0x400a1000 0x00000100>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "rgmii";
+ phy-address = <0x3>;
+ turbo = "no";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@50001000";
+ };
+};
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index d16bae1230f..983aee18579 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -80,7 +80,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 8d725d10882..0a4545159e8 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ??
serial0: serial@80004500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004500 0x8>;
clock-frequency = <97553800>;
current-speed = <9600>;
@@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ??
serial1: serial@80004600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004600 0x8>;
clock-frequency = <97553800>;
current-speed = <57600>;
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index b13a11eb81b..0e758b347cd 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ??
serial0: serial@80004500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004500 0x8>;
clock-frequency = <130041000>;
current-speed = <9600>;
@@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ??
serial1: serial@80004600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x80004600 0x8>;
clock-frequency = <130041000>;
current-speed = <57600>;
diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts
index 697b3f6b78b..22b0832b6c3 100644
--- a/arch/powerpc/boot/dts/mpc8308_p1m.dts
+++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts
@@ -233,7 +233,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
@@ -243,7 +243,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
index a0bd1881081..f66d10d95a8 100644
--- a/arch/powerpc/boot/dts/mpc8308rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -208,7 +208,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
@@ -218,7 +218,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index ac1eb320c7b..1c836c6c5be 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -261,7 +261,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -271,7 +271,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 4dd08c32297..811848e93ae 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -265,7 +265,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
@@ -275,7 +275,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 05ad8c98e52..da9c72ddc34 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -105,7 +105,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -115,7 +115,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index f4fadb23ad6..ff7b15b340a 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -83,7 +83,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -93,7 +93,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 505dc842d80..2608679d0d4 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -283,7 +283,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 0x8>;
@@ -293,7 +293,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index eb732115f01..6cd044d8fb8 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -189,7 +189,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 0x8>;
@@ -199,7 +199,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>; // from bootloader
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 230febb9b72..4552864082c 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -242,7 +242,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -252,7 +252,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 45cfa1c50a2..c0e450a551b 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -136,7 +136,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
@@ -146,7 +146,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <264000000>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index bdf4459677b..b6e9aec1d86 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -102,7 +102,7 @@
serial0: serial@4500 {
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
interrupts = <9 8>;
interrupt-parent = <&ipic>;
@@ -112,7 +112,7 @@
serial1: serial@4600 {
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
interrupts = <10 8>;
interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 855782c5e5e..cfccef57cd1 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -276,7 +276,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -286,7 +286,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index dbc1b988b29..353deff1b7f 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -321,7 +321,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -331,7 +331,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index 9ea78305696..ef4a305a0d0 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -304,7 +304,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -314,7 +314,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index f70cf600083..538fcb92733 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -315,7 +315,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -325,7 +325,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 3447eb9f6e8..32333a908f3 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -321,7 +321,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -331,7 +331,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 645ec51cc6e..5387092fdfb 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -313,7 +313,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -323,7 +323,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 15560c619b0..46224c2430f 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -319,7 +319,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -329,7 +329,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index a75c10eed26..c15881574fd 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,403 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>;
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash@1 {
- compatible = "spansion,s25sl12801";
- reg = <1>;
- spi-max-frequency = <40000000>;
- };
- flash@2 {
- compatible = "spansion,s25sl12801";
- reg = <2>;
- spi-max-frequency = <40000000>;
- };
- flash@3 {
- compatible = "spansion,s25sl12801";
- reg = <3>;
- spi-max-frequency = <40000000>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0 0xffe00000 0x100000>;
};
pci0: pci@ffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x98000000
0x02000000 0 0x98000000
0 0x08000000
@@ -453,31 +71,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0x90000000
0x02000000 0 0x90000000
0 0x08000000
@@ -489,32 +86,10 @@
};
pci3: pcie@ffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x20000000
@@ -525,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi
new file mode 100644
index 00000000000..1462e4cf49d
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi
@@ -0,0 +1,141 @@
+/*
+ * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ i2c@3100 {
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1 0 0>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ flash@1 {
+ compatible = "spansion,s25sl12801";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@2 {
+ compatible = "spansion,s25sl12801";
+ reg = <2>;
+ spi-max-frequency = <40000000>;
+ };
+ flash@3 {
+ compatible = "spansion,s25sl12801";
+ reg = <3>;
+ spi-max-frequency = <40000000>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 0x1 0 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 0x1 0 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ usb@2b000 {
+ dr_mode = "peripheral";
+ phy_type = "ulpi";
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index d95b26021e6..8f4b929b1d1 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8536 DS Device Tree Source
+ * MPC8536DS Device Tree Source (36-bit address map)
*
* Copyright 2008-2009 Freescale Semiconductor, Inc.
*
@@ -9,24 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8536si-pre.dtsi"
/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
cpus {
#cpus = <1>;
@@ -45,351 +32,34 @@
reg = <0 0 0 0>; // Filled by U-Boot
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8536-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8536-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8536-l2-cache-controller";
- reg = <0x20000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0 0x1>;
- interrupt-parent = <&mpic>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
- reg = <0x21300 4>;
- ranges = <0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8536-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- phy_type = "ulpi";
- };
-
- usb@23000 {
- compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
- reg = <0x23000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 0x1>;
- reg = <1>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- usb@2b000 {
- compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
- reg = <0x2b000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <60 0x2>;
- dr_mode = "peripheral";
- phy_type = "ulpi";
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <250000000>;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- sata@18000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
};
- pci0: pci@fffe08000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ pci0: pci@ffe08000 {
+ reg = <0xf 0xffe08000 0 0x1000>;
+ ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0 0 1 &mpic 1 1
- 0x8800 0 0 2 &mpic 2 1
- 0x8800 0 0 3 &mpic 3 1
- 0x8800 0 0 4 &mpic 4 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 0x2>;
- bus-range = <0 0xff>;
- ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
- 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xf 0xffe08000 0 0x1000>;
+ 0x8800 0 0 1 &mpic 1 1 0 0
+ 0x8800 0 0 2 &mpic 2 1 0 0
+ 0x8800 0 0 3 &mpic 3 1 0 0
+ 0x8800 0 0 4 &mpic 4 1 0 0>;
};
- pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ pci1: pcie@ffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -401,31 +71,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xf8000000
0x02000000 0 0xf8000000
0 0x08000000
@@ -437,32 +86,10 @@
};
pci3: pcie@fffe0b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 0xff>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 0x2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
-
pcie@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
@@ -473,3 +100,6 @@
};
};
};
+
+/include/ "fsl/mpc8536si-post.dtsi"
+/include/ "mpc8536ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 8d1bf0fd926..f99fb110c97 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -243,7 +243,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -253,7 +253,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 87ff96549fa..0f5e9391279 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -209,7 +209,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -219,7 +219,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index d793968743c..e934987e882 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -9,339 +9,52 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8544si-pre.dtsi"
+
/ {
model = "MPC8544DS";
compatible = "MPC8544DS", "MPC85xxDS";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8544@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
- soc8544@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8544-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8544-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8544-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8544-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- msi@41600 {
- compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
+ board_soc: soc: soc8544@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
};
pci0: pci@e0008000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 J17 Slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 J16 Slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
};
pci1: pcie@e0009000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0x0 0xe0009000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -353,31 +66,10 @@
};
pci2: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -388,44 +80,11 @@
};
};
- pci3: pcie@e000b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000b000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
- 0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <27 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
- interrupt-map = <
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ board_pci3: pci3: pcie@e000b000 {
+ reg = <0x0 0xe000b000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
+ 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xb0000000
0x2000000 0x0 0xb0000000
0x0 0x100000
@@ -433,70 +92,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
-
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xb0000000
- 0x2000000 0x0 0xb0000000
- 0x0 0x100000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0
- 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent = <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
};
};
+
+/*
+ * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8544si-post.dtsi"
+/include/ "mpc8544ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi
new file mode 100644
index 00000000000..270f64b90f4
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi
@@ -0,0 +1,161 @@
+/*
+ * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_soc {
+ enet0: ethernet@24000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@26520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci3 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xb0000000
+ 0x2000000 0x0 0xb0000000
+ 0x0 0x100000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index a17a5572fb7..07b8dae0f46 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -9,13 +9,11 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
ethernet0 = &enet0;
@@ -29,76 +27,19 @@
pci2 = &pci2;
};
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8548@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
- bus-frequency = <0>; // 166 MHz
- clock-frequency = <0>; // 825 MHz, from uboot
- next-level-cache = <&L2>;
- };
- };
-
memory {
device_type = "memory";
- reg = <0x0 0x8000000>; // 128M at 0x0
+ reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
- soc8548@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8548-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8548-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ lbc: localbus@e0005000 {
+ reg = <0 0xe0005000 0 0x1000>;
+ };
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8548-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8548@e0000000 {
+ ranges = <0 0x0 0xe0000000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
@@ -116,351 +57,178 @@
};
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8548-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x0>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <5 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <5 1 0 0>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
+ };
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>; // reg base, size
- clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
};
- global-utilities@e0000 { //global utilities reg
- compatible = "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
pci0: pci@e0008000 {
+ reg = <0 0xe0008000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
- 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
- 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
- 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
- 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
- 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
- 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
- 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
- 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
- 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
- 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
- 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
- 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
@@ -492,7 +260,7 @@
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
- interrupts = <0 1>;
+ interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
@@ -505,56 +273,25 @@
};
pci1: pci@e0009000 {
+ reg = <0 0xe0009000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
- 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- bus-range = <0 0>;
- ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0009000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ reg = <0 0xe000a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -565,3 +302,5 @@
};
};
};
+
+/include/ "fsl/mpc8548si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 5c5614f9eb1..fe10438613d 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -209,7 +209,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -219,7 +219,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 647daf8e729..09598bb5d44 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -9,60 +9,25 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8568si-pre.dtsi"
/ {
model = "MPC8568EMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
- #address-cells = <1>;
- #size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
- rapidio0 = &rio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8568@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- sleep = <&pmc 0x00008000 // core
- &pmc 0x00004000>; // timebase
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
+ rapidio0 = &rio;
};
memory {
device_type = "memory";
- reg = <0x0 0x10000000>;
+ reg = <0x0 0x0 0x0 0x0>;
};
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus",
- "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
-
+ lbc: localbus@e0005000 {
+ reg = <0x0 0xe0005000 0x0 0x1000>;
ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000
0x2 0x0 0xf0000000 0x04000000
@@ -104,288 +69,65 @@
};
};
- soc8568@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8568-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8568-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8568-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ soc: soc8568@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
i2c-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000004>;
- ranges;
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- interrupts = <3 1>;
- interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
};
};
+ };
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy2>;
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- sleep = <&pmc 0x00000400>;
-
- dma-channel@0 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
+ mdio@24520 {
+ phy0: ethernet-phy@7 {
+ interrupts = <1 1 0 0>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
};
- dma-channel@80 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
};
- dma-channel@100 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
};
- dma-channel@180 {
- compatible = "fsl,mpc8568-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
+ phy3: ethernet-phy@3 {
+ interrupts = <2 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
};
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy2>;
- sleep = <&pmc 0x00000080>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@7 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x7>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
- reg = <0x2>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x3>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
sleep = <&pmc 0x00000040>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
};
- duart-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000002>;
- ranges;
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
- global-utilities@e0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- ranges = <0 0xe0000 0x1000>;
- fsl,has-rstcr;
-
- pmc: power@70 {
- compatible = "fsl,mpc8568-pmc",
- "fsl,mpc8548-pmc";
- reg = <0x70 0x20>;
- };
- };
-
- crypto@30000 {
- compatible = "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xfe>;
- fsl,descriptor-types-mask = <0x12b0ebf>;
- sleep = <&pmc 0x01000000>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
par_io@e0100 {
- reg = <0xe0100 0x100>;
- device_type = "par_io";
num-ports = <7>;
pio1: ucc_pin@01 {
@@ -448,57 +190,21 @@
};
};
- qe@e0080000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0080000 0x40000>;
- reg = <0xe0080000 0x480>;
- sleep = <&pmc 0x00000800>;
- brg-frequency = <0>;
- bus-frequency = <396000000>;
- fsl,qe-num-riscs = <2>;
- fsl,qe-num-snums = <28>;
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x10000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x10000>;
- };
- };
+ qe: qe@e0080000 {
+ ranges = <0x0 0x0 0xe0080000 0x40000>;
+ reg = <0x0 0xe0080000 0x0 0x480>;
spi@4c0 {
- cell-index = <0>;
- compatible = "fsl,spi";
- reg = <0x4c0 0x40>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
spi@500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
enet2: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
@@ -510,10 +216,6 @@
enet3: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <2>;
- reg = <0x3000 0x200>;
- interrupts = <33>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
@@ -532,102 +234,57 @@
* gianfar's MDIO bus */
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
-
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- big-endian;
- interrupts = <46 2 46 2>; //high:30 low:30
- interrupt-parent = <&mpic>;
- };
-
};
pci0: pci@e0008000 {
+ reg = <0x0 0xe0008000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x12 AD18 */
- 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
/* IDSEL 0x13 AD19 */
- 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
- 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
- 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
- sleep = <&pmc 0x80000000>;
- clock-frequency = <66666666>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe0008000 0x1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
+ 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
+ 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
};
/* PCI Express */
pci1: pcie@e000a000 {
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
- sleep = <&pmc 0x20000000>;
- clock-frequency = <33333333>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -638,22 +295,11 @@
};
};
- rio0: rapidio@e00c00000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
- reg = <0xe00c0000 0x20000>;
- ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
- interrupts = <48 2 /* error */
- 49 2 /* bell_outb */
- 50 2 /* bell_inb */
- 53 2 /* msg1_tx */
- 54 2 /* msg1_rx */
- 55 2 /* msg2_tx */
- 56 2 /* msg2_rx */>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00080000 /* controller */
- &pmc 0x00040000>; /* message unit */
+ rio: rapidio@e00c00000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
};
leds {
@@ -672,3 +318,5 @@
};
};
};
+
+/include/ "fsl/mpc8568si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 8b72eaff5b0..7e283c891b7 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -9,66 +9,36 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8569si-pre.dtsi"
/ {
model = "MPC8569EMDS";
compatible = "fsl,MPC8569EMDS";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet5 = &enet5;
ethernet7 = &enet7;
- pci1 = &pci1;
- rapidio0 = &rio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8569@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- sleep = <&pmc 0x00008000 // core
- &pmc 0x00004000>; // timebase
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
+ rapidio0 = &rio;
};
memory {
device_type = "memory";
};
- localbus@e0005000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
- reg = <0xe0005000 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x08000000>;
-
- ranges = <0x0 0x0 0xfe000000 0x02000000
- 0x1 0x0 0xf8000000 0x00008000
- 0x2 0x0 0xf0000000 0x04000000
- 0x3 0x0 0xfc000000 0x00008000
- 0x4 0x0 0xf8008000 0x00008000
- 0x5 0x0 0xf8010000 0x00008000>;
+ lbc: localbus@e0005000 {
+ reg = <0x0 0xe0005000 0x0 0x1000>;
+
+ ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0x0 0xf8000000 0x00008000
+ 0x2 0x0 0x0 0xf0000000 0x04000000
+ 0x3 0x0 0x0 0xfc000000 0x00008000
+ 0x4 0x0 0x0 0xf8008000 0x00008000
+ 0x5 0x0 0x0 0xf8010000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
@@ -133,220 +103,25 @@
};
};
- soc@e0000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,mpc8569-immr", "simple-bus";
- ranges = <0x0 0xe0000000 0x100000>;
- bus-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <10>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8569-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8569-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
+ soc: soc@e0000000 {
+ ranges = <0x0 0x0 0xe0000000 0x100000>;
i2c-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000004>;
- ranges;
-
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
-
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
- interrupts = <3 1>;
- interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
};
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
- };
-
- duart-sleep-nexus {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- sleep = <&pmc 0x00000002>;
- ranges;
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8569-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8569-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,mpc8569-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00200000>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
+ sdhc@2e000 {
status = "disabled";
sdhci,1-bit-only;
};
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- sleep = <&pmc 0x01000000>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,mpc8568-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
- reg = <0xe0000 0x1000>;
- ranges = <0 0xe0000 0x1000>;
- fsl,has-rstcr;
-
- pmc: power@70 {
- compatible = "fsl,mpc8569-pmc",
- "fsl,mpc8548-pmc";
- reg = <0x70 0x20>;
- };
- };
-
par_io@e0100 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xe0100 0x100>;
- ranges = <0x0 0xe0100 0x100>;
- device_type = "par_io";
num-ports = <7>;
qe_pio_e: gpio-controller@80 {
@@ -447,47 +222,11 @@
};
};
- qe@e0080000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
- ranges = <0x0 0xe0080000 0x40000>;
- reg = <0xe0080000 0x480>;
- sleep = <&pmc 0x00000800>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- fsl,qe-num-riscs = <4>;
- fsl,qe-num-snums = <46>;
-
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <46 2 46 2>; //high:30 low:30
- interrupt-parent = <&mpic>;
- };
-
- timer@440 {
- compatible = "fsl,mpc8569-qe-gtm",
- "fsl,qe-gtm", "fsl,gtm";
- reg = <0x440 0x40>;
- interrupts = <12 13 14 15>;
- interrupt-parent = <&qeic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
+ qe: qe@e0080000 {
+ ranges = <0x0 0x0 0xe0080000 0x40000>;
+ reg = <0x0 0xe0080000 0x0 0x480>;
spi@4c0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
- reg = <0x4c0 0x40>;
- cell-index = <0>;
- interrupts = <2>;
- interrupt-parent = <&qeic>;
gpios = <&qe_pio_e 30 0>;
mode = "cpu-qe";
@@ -499,20 +238,10 @@
};
spi@500 {
- cell-index = <1>;
- compatible = "fsl,spi";
- reg = <0x500 0x40>;
- interrupts = <1>;
- interrupt-parent = <&qeic>;
mode = "cpu";
};
usb@6c0 {
- compatible = "fsl,mpc8569-qe-usb",
- "fsl,mpc8323-qe-usb";
- reg = <0x6c0 0x40 0x8b00 0x100>;
- interrupts = <11>;
- interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk5";
fsl,lowspeed-clock = "brg10";
gpios = <&qe_pio_f 3 0 /* USBOE */
@@ -527,10 +256,6 @@
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
@@ -548,35 +273,33 @@
qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
qe_phy5: ethernet-phy@04 {
- interrupt-parent = <&mpic>;
reg = <0x04>;
device_type = "ethernet-phy";
};
qe_phy7: ethernet-phy@06 {
- interrupt-parent = <&mpic>;
reg = <0x6>;
device_type = "ethernet-phy";
};
@@ -610,10 +333,6 @@
enet2: ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <3>;
- reg = <0x2200 0x200>;
- interrupts = <34>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk12";
@@ -637,10 +356,6 @@
enet1: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <2>;
- reg = <0x3000 0x200>;
- interrupts = <33>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
@@ -664,10 +379,6 @@
enet3: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <4>;
- reg = <0x3200 0x200>;
- interrupts = <35>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
@@ -691,10 +402,6 @@
enet5: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <6>;
- reg = <0x3400 0x200>;
- interrupts = <41>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
@@ -706,10 +413,6 @@
enet7: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <8>;
- reg = <0x3600 0x200>;
- interrupts = <43>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "none";
@@ -717,50 +420,14 @@
phy-handle = <&qe_phy7>;
phy-connection-type = "sgmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x20000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x20000>;
- };
- };
-
};
/* PCI Express */
pci1: pcie@e000a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xe000a000 0x1000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 (PEX) */
- 00000 0x0 0x0 0x1 &mpic 0x0 0x1
- 00000 0x0 0x0 0x2 &mpic 0x1 0x1
- 00000 0x0 0x0 0x3 &mpic 0x2 0x1
- 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
- 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
- sleep = <&pmc 0x20000000>;
- clock-frequency = <33333333>;
+ reg = <0x0 0xe000a000 0x0 0x1000>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x10000000
@@ -771,20 +438,15 @@
};
};
- rio0: rapidio@e00c00000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
- reg = <0xe00c0000 0x20000>;
- ranges = <0x0 0x0 0xc0000000 0x0 0x20000000>;
- interrupts = <48 2 /* error */
- 49 2 /* bell_outb */
- 50 2 /* bell_inb */
- 53 2 /* msg1_tx */
- 54 2 /* msg1_rx */
- 55 2 /* msg2_tx */
- 56 2 /* msg2_rx */>;
- interrupt-parent = <&mpic>;
- sleep = <&pmc 0x00080000>;
+ rio: rapidio@e00c00000 {
+ reg = <0x0 0xe00c0000 0x0 0x20000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
+ port2 {
+ status = "disabled";
+ };
};
};
+
+/include/ "fsl/mpc8569si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index f6c04d25e91..0c9f2955deb 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
@@ -78,601 +29,17 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2 71 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xAAAAAAAB>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x3B9AC9FB>;
- fsl,max-adj = <499999999>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -680,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -784,31 +66,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -819,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
new file mode 100644
index 00000000000..c3d4fac0532
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -0,0 +1,397 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xAAAAAAAB>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x3B9AC9FB>;
+ fsl,max-adj = <499999999>;
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index f6365db3b97..6c3d0b305e1 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -78,588 +29,17 @@
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@fffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -667,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -771,31 +66,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -806,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 3375c2ab0c3..d34d1271212 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -14,494 +14,69 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- pci0 = &pci0;
- pci1 = &pci1;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
-
+ PowerPC,8572@1 {
+ status = "disabled";
+ };
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
+ serial@4600 {
+ status = "disabled";
};
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ dma@c300 {
+ status = "disabled";
};
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ gpio-controller@f000 {
};
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
+ l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ ethernet@26000 {
+ status = "disabled";
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ mdio@26520 {
+ status = "disabled";
};
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ ethernet@27000 {
+ status = "disabled";
};
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
+ mdio@27520 {
+ status = "disabled";
};
-
- enet1: ethernet@25000 {
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ pic@40000 {
+ protected-sources = <
+ 31 32 33 37 38 39 /* enet2 enet3 */
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
+ 0xe4 0xe5 0xe6 0xe7 /* msi */
+ >;
};
msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- protected-sources = <
- 31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 26 42 /* dma2 pci2 serial*/
- 0xe4 0xe5 0xe6 0xe7 /* msi */
- >;
};
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
+ timer@42100 {
+ status = "disabled";
};
-
};
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- };
+ pcie@ffe0a000 {
+ status = "disabled";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e7b477f6a3f..d6a8fafc0d0 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -15,169 +15,74 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- pci2 = &pci2;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
+ PowerPC,8572@0 {
+ status = "disabled";
+ };
PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
+ ecm-law@0 {
+ status = "disabled";
};
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
+ ecm@1000 {
+ status = "disabled";
+ };
+ memory-controller@2000 {
+ status = "disabled";
+ };
+ memory-controller@6000 {
+ status = "disabled";
+ };
+ i2c@3000 {
+ status = "disabled";
+ };
+ i2c@3100 {
+ status = "disabled";
+ };
+ serial@4500 {
+ status = "disabled";
+ };
+ gpio-controller@f000 {
+ status = "disabled";
+ };
+ l2-cache-controller@20000 {
+ cache-size = <0x80000>; // L2, 512K
+ };
+ dma@21300 {
+ status = "disabled";
+ };
+ ethernet@24000 {
+ status = "disabled";
};
-
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- reg = <0x3>;
- };
+ status = "disabled";
};
-
- enet2: ethernet@26000 {
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
+ ptp_clock@24e00 {
+ status = "disabled";
};
-
- enet3: ethernet@27000 {
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
+ ethernet@25000 {
+ status = "disabled";
};
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0x80 0x80>;
- interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ status = "disabled";
};
-
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ crypto@30000 {
+ status = "disabled";
};
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
@@ -189,41 +94,25 @@
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@41100 {
+ status = "disabled";
};
+ msi@41600 {
+ msi-available-ranges = <0x80 0x80>;
+ interrupts = <
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ };
+ global-utilities@e0000 {
+ status = "disabled";
+ };
+ };
+ pcie@ffe08000 {
+ status = "disabled";
+ };
+ pcie@ffe09000 {
+ status = "disabled";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 83c3218cb4d..6a109a0ceac 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -175,7 +175,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -186,7 +186,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 848320e4d3c..1e8666ccbed 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,13 +26,6 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map. The most likely case is that we have PCI, so comment out the
- * rapidio node. Leave it here for reference.
- */
- /* rapidio0 = &rapidio0; */
};
cpus {
@@ -335,7 +328,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -345,7 +338,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
@@ -361,6 +354,41 @@
device_type = "open-pic";
};
+ rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 /* msg1_tx_irq */
+ 54 2>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 /* msg2_tx_irq */
+ 56 2>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 /* bell_outb_irq */
+ 50 2>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2>;
+ };
+ };
+
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
reg = <0xe0000 0x1000>;
@@ -612,16 +640,27 @@
};
};
/*
- rapidio0: rapidio@ffec0000 {
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map. The most likely case is that we have PCI, so comment out the
+ * rapidio node. Leave it here for reference.
+
+ rapidio@ffec0000 {
+ reg = <0xffec0000 0x11000>;
+ compatible = "fsl,srio";
+ interrupt-parent = <&mpic>;
+ interrupts = <48 2>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- reg = <0xffec0000 0x20000>;
- ranges = <0 0 0x80000000 0 0x20000000>;
- interrupt-parent = <&mpic>;
- // err_irq bell_outb_irq bell_inb_irq
- // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
- interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ ranges = <0 0 0x80000000 0 0x20000000>;
+ };
};
*/
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
index 8be8e701e1d..fd4cd4da60b 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
@@ -328,7 +328,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -338,7 +338,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts
new file mode 100644
index 00000000000..18e7d79ee4c
--- /dev/null
+++ b/arch/powerpc/boot/dts/obs600.dts
@@ -0,0 +1,314 @@
+/*
+ * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
+ *
+ * Copyright 2011 Ben Herrenschmidt, IBM Corp.
+ *
+ * Based on Kilauea by:
+ *
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "PlatHome,OpenBlockS 600";
+ compatible = "plathome,obs600";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,405EX";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <16384>; /* 16 kB */
+ d-cache-size = <16384>; /* 16 kB */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller {
+ compatible = "ibm,uic-405ex", "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-405ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-405ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x0b0 0x003>;
+ unused-units = <0x00000000>;
+ idle-doze = <0x02000000>;
+ standby = <0xe3e74800>;
+ };
+
+ plb {
+ compatible = "ibm,plb-405ex", "ibm,plb4";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: memory-controller {
+ compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
+ dcr-reg = <0x010 0x002>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x5 0x4 /* ECC DED Error */
+ 0x6 0x4>; /* ECC SEC Error */
+ };
+
+ CRYPTO: crypto@ef700000 {
+ compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+ reg = <0xef700000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x17 0x2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+ /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+ /*SERR*/ 0x2 &UIC1 0x0 0x4
+ /*TXDE*/ 0x3 &UIC1 0x1 0x4
+ /*RXDE*/ 0x4 &UIC1 0x2 0x4>;
+ interrupt-map-mask = <0xffffffff>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-405ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x80000000 0x80000000 0x10000000
+ 0xef600000 0xef600000 0x00a00000
+ 0xf0000000 0xf0000000 0x10000000>;
+ dcr-reg = <0x0a0 0x005>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-405ex", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x5 0x1>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x08000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel + initrd";
+ reg = <0x00000000 0x03de0000>;
+ };
+ partition@3de0000 {
+ label = "user config area";
+ reg = <0x03de0000 0x00080000>;
+ };
+ partition@3e60000 {
+ label = "user program area";
+ reg = <0x03e60000 0x04000000>;
+ };
+ partition@7e60000 {
+ label = "flat device tree";
+ reg = <0x07e60000 0x00080000>;
+ };
+ partition@7ee0000 {
+ label = "test program";
+ reg = <0x07ee0000 0x00080000>;
+ };
+ partition@7f60000 {
+ label = "u-boot env";
+ reg = <0x07f60000 0x00040000>;
+ };
+ partition@7fa0000 {
+ label = "u-boot";
+ reg = <0x07fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600200 0x00000008>;
+ virtual-reg = <0xef600200>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1a 0x4>;
+ };
+
+ UART1: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600400 {
+ compatible = "ibm,iic-405ex", "ibm,iic";
+ reg = <0xef600400 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "dallas,ds1340";
+ reg = <0x68>;
+ };
+ };
+
+ IIC1: i2c@ef600500 {
+ compatible = "ibm,iic-405ex", "ibm,iic";
+ reg = <0xef600500 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x7 0x4>;
+ };
+
+ RGMII0: emac-rgmii@ef600b00 {
+ compatible = "ibm,rgmii-405ex", "ibm,rgmii";
+ reg = <0xef600b00 0x00000104>;
+ has-mdio;
+ };
+
+ EMAC0: ethernet@ef600900 {
+ linux,network-index = <0x0>;
+ device_type = "network";
+ compatible = "ibm,emac-405ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+ /*Wake*/ 0x1 &UIC1 0x1d 0x4>;
+ reg = <0xef600900 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600a00 {
+ linux,network-index = <0x1>;
+ device_type = "network";
+ compatible = "ibm,emac-405ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+ /*Wake*/ 0x1 &UIC1 0x1f 0x4>;
+ reg = <0xef600a00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ GPIO: gpio@ef600800 {
+ device_type = "gpio";
+ compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
+ reg = <0xef600800 0x50>;
+ };
+ };
+ };
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600200";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
index d6c669c888e..b868d22984e 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ b/arch/powerpc/boot/dts/p1010rdb.dts
@@ -9,230 +9,33 @@
* option) any later version.
*/
-/include/ "p1010si.dtsi"
+/include/ "fsl/p1010si-pre.dtsi"
/ {
model = "fsl,P1010RDB";
compatible = "fsl,P1010RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- can0 = &can0;
- can1 = &can1;
- };
-
memory {
device_type = "memory";
};
- ifc@ffe1e000 {
+ board_ifc: ifc: ifc@ffe1e000 {
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
0x1 0x0 0x0 0xff800000 0x00010000
0x3 0x0 0x0 0xffb00000 0x00000020>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x2000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR DTB Image";
- };
-
- partition@80000 {
- /* 7 MB for Linux Kernel Image */
- reg = <0x00080000 0x00700000>;
- label = "NOR Linux Kernel Image";
- };
-
- partition@800000 {
- /* 20MB for JFFS2 based Root file System */
- reg = <0x00800000 0x01400000>;
- label = "NOR JFFS2 Root File System";
- };
-
- partition@1f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x01f00000 0x00100000>;
- label = "NOR U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,ifc-nand";
- reg = <0x1 0x0 0x10000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00f00000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1900000 {
- /* 7MB for User Area */
- reg = <0x01900000 0x00700000>;
- label = "NAND User area";
- };
- };
-
- cpld@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010rdb-cpld";
- reg = <0x3 0x0 0x0000020>;
- bank-width = <1>;
- device-width = <1>;
- };
+ reg = <0x0 0xffe1e000 0 0x2000>;
};
- soc@ffe00000 {
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <50000000>;
-
- partition@0 {
- /* 1MB for u-boot Bootloader Image */
- /* 1MB for Environment */
- reg = <0x0 0x00100000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 512KB for DTB Image */
- reg = <0x00100000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- partition@180000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00180000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
- };
-
- partition@580000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00580000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
- };
-
- partition@980000 {
- /* 6.5MB for JFFS2 based RFS */
- reg = <0x00980000 0x00680000>;
- label = "SPI Flash JFFS2 RFS";
- };
- };
- };
-
- usb@22000 {
- phy_type = "utmi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x0>;
- };
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x2>;
- };
- };
-
- enet0: ethernet@b0000 {
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy2>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
-
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -244,24 +47,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -272,3 +61,6 @@
};
};
};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
new file mode 100644
index 00000000000..d4c4a773028
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -0,0 +1,234 @@
+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 7 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00700000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@800000 {
+ /* 20MB for JFFS2 based Root file System */
+ reg = <0x00800000 0x01400000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@1f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x01f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x1 0x0 0x10000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND User area";
+ };
+ };
+
+ cpld@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1010rdb-cpld";
+ reg = <0x3 0x0 0x0000020>;
+ bank-width = <1>;
+ device-width = <1>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partition@0 {
+ /* 1MB for u-boot Bootloader Image */
+ /* 1MB for Environment */
+ reg = <0x0 0x00100000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 512KB for DTB Image */
+ reg = <0x00100000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition@180000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00180000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition@580000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00580000 0x00400000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+
+ partition@980000 {
+ /* 6.5MB for JFFS2 based RFS */
+ reg = <0x00980000 0x00680000>;
+ label = "SPI Flash JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "utmi";
+ dr_mode = "host";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy2: ethernet-phy@2 {
+ interrupts = <2 1 0 0>;
+ reg = <0x2>;
+ };
+
+ tbi-phy@3 {
+ device-type = "tbi-phy";
+ reg = <0x3>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy2>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb_36b.dts
new file mode 100644
index 00000000000..64776f4a465
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1010rdb_36b.dts
@@ -0,0 +1,89 @@
+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+ model = "fsl,P1010RDB";
+ compatible = "fsl,P1010RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@fffe1e000 {
+ /* NOR, NAND Flashes and CPLD on board */
+ ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+ 0x1 0x0 0xf 0xff800000 0x00010000
+ 0x3 0x0 0xf 0xffb00000 0x00000020>;
+ reg = <0xf 0xffe1e000 0 0x2000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1010rdb.dtsi"
+/include/ "fsl/p1010si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1010si.dtsi b/arch/powerpc/boot/dts/p1010si.dtsi
deleted file mode 100644
index cabe0a453ae..00000000000
--- a/arch/powerpc/boot/dts/p1010si.dtsi
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * P1010si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1010";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1010@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
- };
-
- ifc@ffe1e000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0xffe1e000 0 0x2000>;
- interrupts = <16 2 19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1010-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1010-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1010-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <1>;
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- sata@18000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- sata@19000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can0: can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- can1: can@1d000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1d000 0x1000>;
- interrupts = <61 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1010-l2-cache-controller",
- "fsl,p1014-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1010-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,p1010-dma-channel", "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- dr_mode = "host";
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x26000 0x1000 0xb1030 0x4>;
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x8>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- fsl,sdhci-auto-cmd12;
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- fsl,rx-bit-map = <0xff>;
- fsl,tx-bit-map = <0xff>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1010-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1010-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
index d6a8ae45813..518bf99b1f5 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dts
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -9,267 +9,33 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
-
+/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1020RDB";
compatible = "fsl,P1020RDB";
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
+ board_lbc: lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR (RO) Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR (RO) DTB Image";
- read-only;
- };
-
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR (RW) JFFS2 Root File System";
- };
-
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR (RO) U-Boot Image";
- read-only;
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1020-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND (RO) U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND (RO) DTB Image";
- read-only;
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
- label = "NAND (RW) JFFS2 Root File System";
- };
-
- partition@1100000 {
- /* 15MB for JFFS2 based Root file System */
- reg = <0x01100000 0x00f00000>;
- label = "NAND (RW) Writable User area";
- };
- };
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
-
};
- soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
- mdio@24000 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -281,21 +47,10 @@
};
pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -306,3 +61,6 @@
};
};
};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
new file mode 100644
index 00000000000..b5bd86f4baf
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -0,0 +1,247 @@
+/*
+ * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+};
+
+&board_soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "dtb";
+ read-only;
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "kernel";
+ read-only;
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "file system";
+ read-only;
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "file system jffs2";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb@23000 {
+ phy_type = "ulpi";
+ };
+ */
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts
new file mode 100644
index 00000000000..bdbdb6097e5
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts
@@ -0,0 +1,66 @@
+/*
+ * P1020 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1020RDB";
+ compatible = "fsl,P1020RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_lbc: lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ };
+
+ board_soc: soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1020rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
index f0bf7f42f09..41b4585c5da 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core0.dts
@@ -16,7 +16,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -32,7 +32,7 @@
cpus {
PowerPC,P1020@1 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -45,169 +45,19 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- spi-max-frequency = <40000000>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25000 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
enet0: ethernet@b0000 {
status = "disabled";
};
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi0>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- phy_type = "ulpi";
- };
- */
-
mpic: pic@40000 {
protected-sources = <
42 29 30 34 /* serial1, enet0-queue-group0 */
17 18 24 45 /* enet0-queue-group1, crypto */
>;
};
-
- };
-
- pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
};
};
diff --git a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
index 6ec02204a44..51745382188 100644
--- a/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p1020rdb_camp_core1.dts
@@ -15,7 +15,7 @@
* option) any later version.
*/
-/include/ "p1020si.dtsi"
+/include/ "p1020rdb.dts"
/ {
model = "fsl,P1020RDB";
@@ -28,7 +28,7 @@
cpus {
PowerPC,P1020@0 {
- status = "disabled";
+ status = "disabled";
};
};
@@ -85,12 +85,6 @@
status = "disabled";
};
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@b1000 {
status = "disabled";
};
@@ -135,7 +129,6 @@
global-utilities@e0000 { //global utilities block
status = "disabled";
};
-
};
pci0: pcie@ffe09000 {
diff --git a/arch/powerpc/boot/dts/p1020si.dtsi b/arch/powerpc/boot/dts/p1020si.dtsi
deleted file mode 100644
index 5c5acb66c3f..00000000000
--- a/arch/powerpc/boot/dts/p1020si.dtsi
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * P1020si Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P1020";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
- };
-
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
-
- };
-
- enet0: ethernet@b0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
- };
-
- enet1: ethernet@b1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
- };
-
- enet2: ethernet@b2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
-
- queue-group@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
-
- queue-group@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xb6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- };
-
- /* USB2 is shared with localbus, so it must be disabled
- by default. We can't put 'status = "disabled";' here
- since U-Boot doesn't clear the status property when
- it enables USB2. OTOH, U-Boot does create a new node
- when there isn't any. So, just comment it out.
- usb@23000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x23000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <46 0x2>;
- phy_type = "ulpi";
- };
- */
-
- sdhci@2e000 {
- compatible = "fsl,p1020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1020-guts","fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-};
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index ad5b8526900..d9540791e43 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -9,53 +9,22 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/p1021si-pre.dtsi"
/ {
model = "fsl,P1021";
compatible = "fsl,P1021MDS";
- #address-cells = <2>;
- #size-cells = <2>;
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
- pci0 = &pci0;
- pci1 = &pci1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1021@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1021@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
};
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0x0 0x1000>;
/* NAND Flash, BCSR, PMC0/1*/
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
@@ -138,99 +107,26 @@
};
};
- soc@ffe00000 {
-
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
+ soc: soc@ffe00000 {
compatible = "fsl,p1021-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1021-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1021-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@u-boot {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -253,237 +149,49 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1021-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
-
+ mdio@24000 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <1 1>;
+ interrupts = <1 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1>;
+ interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy4: ethernet-phy@4 {
- interrupt-parent = <&mpic>;
reg = <0x4>;
};
+ tbi-phy@5 {
+ device_type = "tbi-phy";
+ reg = <0x5>;
+ };
};
mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-tbi";
- reg = <0x25000 0x1000 0xb1030 0x4>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 30 2 34 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 18 2 24 2>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b1000 {
phy-handle = <&phy4>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 36 2 40 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 52 2 67 2>;
- };
};
- enet2: ethernet@B2000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupt-parent = <&mpic>;
+ ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB2000 0x1000>;
- interrupts = <31 2 32 2 33 2>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB6000 0x1000>;
- interrupts = <25 2 26 2 27 2>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1021-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1",
- "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1021-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1021-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
par_io@e0100 {
@@ -499,8 +207,7 @@
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
- 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
-*/
+ 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
@@ -535,31 +242,10 @@
};
pci0: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -571,31 +257,10 @@
};
pci1: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -606,36 +271,16 @@
};
};
- qe@ffe80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "qe";
- compatible = "fsl,qe";
+ qe: qe@ffe80000 {
ranges = <0x0 0x0 0xffe80000 0x40000>;
reg = <0 0xffe80000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
- fsl,qe-num-riscs = <1>;
- fsl,qe-num-snums = <28>;
status = "disabled"; /* no firmware loaded */
- qeic: interrupt-controller@80 {
- interrupt-controller;
- compatible = "fsl,qe-ic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0x80 0x80>;
- interrupts = <63 2 60 2>; //high:47 low:44
- interrupt-parent = <&mpic>;
- };
-
enet3: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <1>;
- reg = <0x2000 0x200>;
- interrupts = <32>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "clk12";
tx-clock-name = "clk9";
@@ -645,20 +290,15 @@
};
mdio@2120 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2120 0x18>;
- compatible = "fsl,ucc-mdio";
-
qe_phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <4 1>;
+ interrupts = <4 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@03 {
interrupt-parent = <&mpic>;
- interrupts = <5 1>;
+ interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
@@ -671,10 +311,6 @@
enet4: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
- cell-index = <5>;
- reg = <0x2400 0x200>;
- interrupts = <40>;
- interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk13";
@@ -682,18 +318,7 @@
phy-handle = <&qe_phy1>;
phy-connection-type = "rmii";
};
-
- muram@10000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,qe-muram", "fsl,cpm-muram";
- ranges = <0x0 0x10000 0x6000>;
-
- data-only@0 {
- compatible = "fsl,qe-muram-data",
- "fsl,cpm-muram-data";
- reg = <0x0 0x6000>;
- };
- };
};
};
+
+/include/ "fsl/p1021si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index b9b8719a620..ef95717db4b 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -8,57 +8,36 @@
* kind, whether express or implied.
*/
-/dts-v1/;
+/include/ "fsl/p1022si-pre.dtsi"
/ {
- model = "fsl,P1022";
+ model = "fsl,P1022DS";
compatible = "fsl,P1022DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P1022@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P1022@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
-
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
+ /*
+ * This node is used to access the pixis via "indirect" mode,
+ * which is done by writing the pixis register index to chip
+ * select 0 and the value to/from chip select 1. Indirect
+ * mode is the only way to access the pixis when DIU video
+ * is enabled. Note that this assumes that the first column
+ * of the 'ranges' property above is the chip select number.
+ */
+ board-control@0,0 {
+ compatible = "fsl,p1022ds-indirect-pixis";
+ reg = <0x0 0x0 1 /* CS0 */
+ 0x1 0x0 1>; /* CS1 */
+ };
+
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -161,51 +140,10 @@
};
};
- soc@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1022-immr", "simple-bus";
+ soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1022-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1022-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <16 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
-
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
@@ -216,41 +154,14 @@
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- espi,num-ss-bits = <4>;
- mode = "cpu";
-
- fsl_m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
spi-max-frequency = <40000000>; /* input clock */
+
partition@0 {
label = "u-boot-spi";
reg = <0x00000000 0x00100000>;
@@ -274,115 +185,20 @@
};
ssi@15000 {
- compatible = "fsl,mpc8610-ssi";
- cell-index = <0>;
- reg = <0x15000 0x100>;
- interrupts = <75 2 0 0>;
fsl,mode = "i2s-slave";
codec-handle = <&wm8776>;
- fsl,playback-dma = <&dma00>;
- fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <15>;
fsl,ssi-asynchronous;
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma00: dma-channel@0 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma01: dma-channel@80 {
- compatible = "fsl,ssi-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1022-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
phy_type = "ulpi";
};
- mdio@24000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x24000 0x1000 0xb0030 0x4>;
+ usb@23000 {
+ status = "disabled";
+ };
+ mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
@@ -391,189 +207,28 @@
interrupts = <9 1 0 0>;
reg = <0x2>;
};
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
};
- mdio@25000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,etsec2-mdio";
- reg = <0x25000 0x1000 0xb1030 0x4>;
- };
-
- enet0: ethernet@B0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- fsl,magic-packet;
- fsl,wake-on-filer;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB0000 0x1000>;
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB4000 0x1000>;
- interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
- };
};
- enet1: ethernet@B1000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "fsl,etsec2";
- fsl,num_rx_queues = <0x8>;
- fsl,num_tx_queues = <0x8>;
- local-mac-address = [ 00 00 00 00 00 00 ];
+ ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
- queue-group@0{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB1000 0x1000>;
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
- };
- queue-group@1{
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0xB5000 0x1000>;
- interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
- };
- };
-
- sdhci@2e000 {
- compatible = "fsl,p1022-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- fsl,sdhci-auto-cmd12;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
- "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
- "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x97c>;
- fsl,descriptor-types-mask = <0x3a30abf>;
- };
-
- sata@18000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x18000 0x1000>;
- cell-index = <1>;
- interrupts = <74 0x2 0 0>;
- };
-
- sata@19000 {
- compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
- reg = <0x19000 0x1000>;
- cell-index = <2>;
- interrupts = <41 0x2 0 0>;
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
- reg = <0xe0070 0x20>;
- };
-
- display@10000 {
- compatible = "fsl,diu", "fsl,p1022-diu";
- reg = <0x10000 1000>;
- interrupts = <64 2 0 0>;
- };
-
- timer@41100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x41100 0x100 0x41300 4>;
- interrupts = <0 0 3 0
- 1 0 3 0
- 2 0 3 0
- 3 0 3 0>;
- };
-
- timer@42100 {
- compatible = "fsl,mpic-global-timer";
- reg = <0x42100 0x100 0x42300 4>;
- interrupts = <4 0 3 0
- 5 0 3 0
- 6 0 3 0
- 7 0 3 0>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1022-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1022-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
};
};
pci0: pcie@fffe09000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -585,30 +240,11 @@
};
pci1: pcie@fffe0a000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -619,32 +255,11 @@
};
};
-
pci2: pcie@fffe0b000 {
- compatible = "fsl,p1022-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0b000 0 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupts = <16 2 0 0>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -655,3 +270,5 @@
};
};
};
+
+/include/ "fsl/p1022si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
index d3b478242ea..beb6cb12e59 100644
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ b/arch/powerpc/boot/dts/p1023rds.dts
@@ -34,137 +34,30 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/dts-v1/;
+/include/ "fsl/p1023si-pre.dtsi"
/ {
model = "fsl,P1023";
compatible = "fsl,P1023RDS";
#address-cells = <2>;
#size-cells = <2>;
-
- aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,P1023@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- cpu1: PowerPC,P1023@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
+ interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
- soc@ff600000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p1023-immr", "simple-bus";
+ soc: soc@ff600000 {
ranges = <0x0 0x0 0xff600000 0x200000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p1023-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <16 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p1023-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- fsl,espi-num-chipselects = <4>;
-
fsl_dataflash@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -186,197 +79,14 @@
};
};
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,qoriq-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p1023-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x40000>; // L2,256K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
dr_mode = "host";
phy_type = "ulpi";
};
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30000 0x10000>;
- ranges = <0 0x30000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <58 2>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <45 2>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <57 2>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <57 2>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- power@e0070{
- compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",
- "fsl,p1022-pmc";
- reg = <0xe0070 0x20>;
- etsec1_clk: soc-clk@B0{
- fsl,pmcdr-mask = <0x00000080>;
- };
- etsec2_clk: soc-clk@B1{
- fsl,pmcdr-mask = <0x00000040>;
- };
- etsec3_clk: soc-clk@B2{
- fsl,pmcdr-mask = <0x00000020>;
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p1023-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p1023-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
};
- localbus@ff605000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
+ lbc: localbus@ff605000 {
reg = <0 0xff605000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
/* NOR Flash, BCSR */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000
@@ -428,34 +138,18 @@
};
pci0: pcie@ff60a000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <1>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
/* IRQ[0:3] are pulled up on board, set to active-low */
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0 0 1 &mpic 0 1 0 0
+ 0000 0 0 2 &mpic 1 1 0 0
+ 0000 0 0 3 &mpic 2 1 0 0
+ 0000 0 0 4 &mpic 3 1 0 0
>;
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
@@ -467,38 +161,22 @@
};
};
- pci1: pcie@ff609000 {
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- cell-index = <2>;
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci1: pci1: pcie@ff609000 {
reg = <0 0xff609000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
/*
* IRQ[4:6] only for PCIe, set to active-high,
* IRQ[7] is pulled up on board, set to active-low
*/
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 2
- 0000 0 0 2 &mpic 5 2
- 0000 0 0 3 &mpic 6 2
- 0000 0 0 4 &mpic 7 1
+ 0000 0 0 1 &mpic 4 2 0 0
+ 0000 0 0 2 &mpic 5 2 0 0
+ 0000 0 0 3 &mpic 6 2 0 0
+ 0000 0 0 4 &mpic 7 1 0 0
>;
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
@@ -511,37 +189,21 @@
};
pci2: pcie@ff60b000 {
- cell-index = <3>;
- compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xff60b000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- interrupt-map-mask = <0xf800 0 0 7>;
/*
* IRQ[8:10] are pulled up on board, set to active-low
* IRQ[11] only for PCIe, set to active-high,
*/
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 8 1
- 0000 0 0 2 &mpic 9 1
- 0000 0 0 3 &mpic 10 1
- 0000 0 0 4 &mpic 11 2
+ 0000 0 0 1 &mpic 8 1 0 0
+ 0000 0 0 2 &mpic 9 1 0 0
+ 0000 0 0 3 &mpic 10 1 0 0
+ 0000 0 0 4 &mpic 11 2 0 0
>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
@@ -553,3 +215,5 @@
};
};
};
+
+/include/ "fsl/p1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
index 66f03d6477b..237310cc7e6 100644
--- a/arch/powerpc/boot/dts/p2020ds.dts
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -9,30 +9,17 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020DS";
compatible = "fsl,P2020DS";
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
-
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- compatible = "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
0x2 0x0 0x0 0xffa00000 0x00040000
@@ -40,203 +27,18 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
- reg = <0x3 0x0 0x30>;
- };
-
- nand@4,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
+ reg = <0 0xffe05000 0 0x1000>;
};
- soc@ffe00000 {
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x2>;
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- mdio@25520 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
-
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xCCCCCCCD>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x0001869B>;
- fsl,max-adj = <249999999>;
- };
-
- enet0: ethernet@24000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
- };
-
- enet1: ethernet@25000 {
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet2: ethernet@26000 {
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
- };
-
-
- msi@41600 {
- compatible = "fsl,mpic-msi";
- };
+ board_soc: soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
};
- pci0: pcie@ffe08000 {
+ pci2: pcie@ffe08000 {
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x8 0x1
- 0000 0x0 0x0 0x2 &mpic 0x9 0x1
- 0000 0x0 0x0 0x3 &mpic 0xa 0x1
- 0000 0x0 0x0 0x4 &mpic 0xb 0x1
- >;
+ reg = <0 0xffe08000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -247,61 +49,11 @@
};
};
- pci1: pcie@ffe09000 {
+ board_pci1: pci1: pcie@ffe09000 {
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
-
- // IDSEL 0x11 func 0 - PCI slot 1
- 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 1 - PCI slot 1
- 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 2 - PCI slot 1
- 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 3 - PCI slot 1
- 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 4 - PCI slot 1
- 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 5 - PCI slot 1
- 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 6 - PCI slot 1
- 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x11 func 7 - PCI slot 1
- 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
- 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
- >;
-
+ reg = <0 0xffe09000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -309,89 +61,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <4 1>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
- pci2: pcie@ffe0a000 {
+ pci0: pcie@ffe0a000 {
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
+ reg = <0 0xffe0a000 0 0x1000>;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -402,3 +79,11 @@
};
};
};
+
+/*
+ * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/p2020si-post.dtsi"
+/include/ "p2020ds.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
new file mode 100644
index 00000000000..c1cf6cef4dd
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -0,0 +1,316 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+ reg = <0x3 0x0 0x30>;
+ };
+
+ nand@4,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <3 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <3 1 0 0>;
+ reg = <0x2>;
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xCCCCCCCD>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x0001869B>;
+ fsl,max-adj = <249999999>;
+ };
+
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+
+&board_pci1 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ // IDSEL 0x11 func 0 - PCI slot 1
+ 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 1 - PCI slot 1
+ 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 2 - PCI slot 1
+ 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 3 - PCI slot 1
+ 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 4 - PCI slot 1
+ 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 5 - PCI slot 1
+ 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 6 - PCI slot 1
+ 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x11 func 7 - PCI slot 1
+ 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+ 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <4 1 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 1d7a05f3021..26759a59171 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,7 +9,7 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
@@ -29,7 +29,8 @@
device_type = "memory";
};
- localbus@ffe05000 {
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -140,7 +141,9 @@
};
- soc@ffe00000 {
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
@@ -148,17 +151,13 @@
};
};
- spi@7000 {
-
- fsl_m25p80@0 {
+ spi@7000 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
spi-max-frequency = <50000000>;
- mode = <0>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
@@ -202,15 +201,17 @@
mdio@24520 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x0>;
- };
+ };
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
- };
+ };
+ tbi-phy@2 {
+ device_type = "tbi-phy";
+ reg = <0x2>;
+ };
};
mdio@25520 {
@@ -224,11 +225,7 @@
status = "disabled";
};
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
+ ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
@@ -252,29 +249,18 @@
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
-
};
pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
+ pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -286,21 +272,10 @@
};
pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -311,3 +286,5 @@
};
};
};
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index fc8ddddfccb..66aac864c4c 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,28 +14,16 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- pci0 = &pci0;
- };
-
cpus {
PowerPC,P2020@1 {
- status = "disabled";
+ status = "disabled";
};
-
- };
-
- memory {
- device_type = "memory";
};
localbus@ffe05000 {
@@ -43,115 +31,18 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
dma@c300 {
status = "disabled";
};
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25520 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- status = "disabled";
- };
-
enet0: ethernet@24000 {
status = "disabled";
};
- enet1: ethernet@25000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@26000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
-
mpic: pic@40000 {
protected-sources = <
42 76 77 78 79 /* serial1 , dma2 */
@@ -164,40 +55,12 @@
msi@41600 {
status = "disabled";
};
-
-
};
pci0: pcie@ffe08000 {
status = "disabled";
};
- pci1: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
pci2: pcie@ffe0a000 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 261c34ba45e..9bd8ef493dd 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,28 +15,18 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial1;
- pci1 = &pci1;
- };
-
cpus {
PowerPC,P2020@0 {
- status = "disabled";
+ status = "disabled";
};
};
- memory {
- device_type = "memory";
- };
-
localbus@ffe05000 {
status = "disabled";
};
@@ -70,55 +60,10 @@
status = "disabled";
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
gpio: gpio-controller@f000 {
status = "disabled";
};
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- };
-
dma@21300 {
status = "disabled";
};
@@ -139,12 +84,6 @@
status = "disabled";
};
- enet0: ethernet@24000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@25000 {
status = "disabled";
};
@@ -170,22 +109,6 @@
>;
};
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
global-utilities@e0000 { //global utilities block
status = "disabled";
};
@@ -199,30 +122,4 @@
pci1: pcie@ffe09000 {
status = "disabled";
};
-
- pci2: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
deleted file mode 100644
index 6def17f265d..00000000000
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * P2020 Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P2020";
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2>;
- interrupt-parent = <&mpic>;
- mode = "cpu";
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2>;
- interrupt-parent = <&mpic>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <28 0x2>;
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
-
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
-
- };
-
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2>;
- interrupt-parent = <&mpic>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- };
-};
diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 79b6895027c..4f957db0123 100644
--- a/arch/powerpc/boot/dts/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p2041si.dtsi"
+/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -106,7 +108,18 @@
};
};
- localbus@ffe124000 {
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
@@ -122,6 +135,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -137,6 +151,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -152,6 +167,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -163,3 +179,5 @@
};
};
};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2041si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
deleted file mode 100644
index f7492edd0df..00000000000
--- a/arch/powerpc/boot/dts/p2041si.dtsi
+++ /dev/null
@@ -1,692 +0,0 @@
-/*
- * P2041 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P2041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p2041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p2041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p2041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p2041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p2041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
-
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts
index bbd113b49a8..f469145abae 100644
--- a/arch/powerpc/boot/dts/p3041ds.dts
+++ b/arch/powerpc/boot/dts/p3041ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3041si.dtsi"
+/include/ "fsl/p3041si-pre.dtsi"
/ {
model = "fsl,P3041DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,18 @@
};
};
- localbus@ffe124000 {
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,6 +173,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -175,6 +189,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -190,6 +205,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -205,6 +221,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -216,3 +233,5 @@
};
};
};
+
+/include/ "fsl/p3041si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3041si.dtsi b/arch/powerpc/boot/dts/p3041si.dtsi
deleted file mode 100644
index 87130b732bc..00000000000
--- a/arch/powerpc/boot/dts/p3041si.dtsi
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * P3041 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3041-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3041-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p3041-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3041-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3041-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p3060qds.dts b/arch/powerpc/boot/dts/p3060qds.dts
index 08b9193213e..529042e4b9a 100644
--- a/arch/powerpc/boot/dts/p3060qds.dts
+++ b/arch/powerpc/boot/dts/p3060qds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p3060si.dtsi"
+/include/ "fsl/p3060si-pre.dtsi"
/ {
model = "fsl,P3060QDS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -138,7 +140,7 @@
};
};
- rapidio@ffe0c0000 {
+ rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
@@ -149,7 +151,7 @@
};
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -210,6 +212,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -225,6 +228,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -236,3 +240,5 @@
};
};
};
+
+/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
deleted file mode 100644
index 68947e157bb..00000000000
--- a/arch/powerpc/boot/dts/p3060si.dtsi
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * P3060 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- rmu: rmu@d3000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,srio-rmu";
- reg = <0xd3000 0x500>;
- ranges = <0x0 0xd3000 0x500>;
-
- message-unit@0 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x0 0x100>;
- interrupts = <
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0>;/* msg1_rx_irq */
- };
- message-unit@100 {
- compatible = "fsl,srio-msg-unit";
- reg = <0x100 0x100>;
- interrupts = <
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>;/* msg2_rx_irq */
- };
- doorbell-unit@400 {
- compatible = "fsl,srio-dbell-unit";
- reg = <0x400 0x80>;
- interrupts = <
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0>;/* bell_inb_irq */
- };
- port-write-unit@4e0 {
- compatible = "fsl,srio-port-write-unit";
- reg = <0x4e0 0x20>;
- interrupts = <16 2 1 11>;
- };
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p3060-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p3060-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p3060-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio@ffe0c0000 {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts
index c7916dc2801..6d60e54e50a 100644
--- a/arch/powerpc/boot/dts/p4080ds.dts
+++ b/arch/powerpc/boot/dts/p4080ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p4080si.dtsi"
+/include/ "fsl/p4080si-pre.dtsi"
/ {
model = "fsl,P4080DS";
@@ -50,6 +50,9 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -105,12 +108,18 @@
};
};
- rapidio0: rapidio@ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x20000>;
- ranges = <0 0 0xc 0x20000000 0 0x01000000>;
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
};
- localbus@ffe124000 {
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
3 0 0xf 0xffdf0000 0x00008000>;
@@ -132,6 +141,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -147,6 +157,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -162,6 +173,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -174,3 +186,5 @@
};
};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p4080si.dtsi b/arch/powerpc/boot/dts/p4080si.dtsi
deleted file mode 100644
index f20c01ab247..00000000000
--- a/arch/powerpc/boot/dts/p4080si.dtsi
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * P4080 Silicon Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P4080";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- next-level-cache = <&L2_2>;
- L2_2: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- next-level-cache = <&L2_3>;
- L2_3: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@42000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu2>;
- reg = <0x42000 0x1000>;
- };
- dcsr-cpu-sb-proxy@43000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu3>;
- reg = <0x43000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p4080-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p4080-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p4080-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p4080-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- voltage-ranges = <3300 3300>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p4080-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p4080-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p4080-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2 0 0>;
- };
- };
-
- rapidio0: rapidio@ffe0c0000 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
- };
-
- localbus@ffe124000 {
- compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p4080-pcie";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts
index e6d40999ccd..1c250684c90 100644
--- a/arch/powerpc/boot/dts/p5020ds.dts
+++ b/arch/powerpc/boot/dts/p5020ds.dts
@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/include/ "p5020si.dtsi"
+/include/ "fsl/p5020si-pre.dtsi"
/ {
model = "fsl,P5020DS";
@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
@@ -99,7 +101,18 @@
};
};
- localbus@ffe124000 {
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
+ lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
@@ -160,7 +173,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-
+ fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -176,6 +189,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -191,6 +205,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -206,6 +221,7 @@
reg = <0xf 0xfe203000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
@@ -217,3 +233,5 @@
};
};
};
+
+/include/ "fsl/p5020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p5020si.dtsi b/arch/powerpc/boot/dts/p5020si.dtsi
deleted file mode 100644
index e7948ad71fa..00000000000
--- a/arch/powerpc/boot/dts/p5020si.dtsi
+++ /dev/null
@@ -1,716 +0,0 @@
-/*
- * P5020 Silicon Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
- compatible = "fsl,P5020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- pci3 = &pci3;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- sdhc = &sdhc;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
-
-/*
- rio0 = &rapidio0;
- */
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e5500@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e5500@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-
- dcsr: dcsr@f00000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- interrupt-parent = <&mpic>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-ddr@13000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr2>;
- reg = <0x13000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- };
-
- soc: soc@ffe000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- ddr2: memory-controller@9000 {
- compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
- reg = <0x9000 0x1000>;
- interrupts = <16 2 1 22>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x4000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi0: msi@41600 {
- compatible = "fsl,mpic-msi";
- reg = <0x41600 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- msi1: msi@41800 {
- compatible = "fsl,mpic-msi";
- reg = <0x41800 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe8 0 0 0
- 0xe9 0 0 0
- 0xea 0 0 0
- 0xeb 0 0 0
- 0xec 0 0 0
- 0xed 0 0 0
- 0xee 0 0 0
- 0xef 0 0 0>;
- };
-
- msi2: msi@41a00 {
- compatible = "fsl,mpic-msi";
- reg = <0x41a00 0x200>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xf0 0 0 0
- 0xf1 0 0 0
- 0xf2 0 0 0
- 0xf3 0 0 0
- 0xf4 0 0 0
- 0xf5 0 0 0
- 0xf6 0 0 0
- 0xf7 0 0 0>;
- };
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p5020-serdes";
- reg = <0xea000 0x1000>;
- };
-
- dma0: dma@100300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x100300 0x4>;
- ranges = <0x0 0x100100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <28 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <29 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <30 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <31 2 0 0>;
- };
- };
-
- dma1: dma@101300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p5020-dma", "fsl,eloplus-dma";
- reg = <0x101300 0x4>;
- ranges = <0x0 0x101100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <32 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <33 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <34 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,p5020-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <35 2 0 0>;
- };
- };
-
- spi@110000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,p5020-espi", "fsl,mpc8536-espi";
- reg = <0x110000 0x1000>;
- interrupts = <53 0x2 0 0>;
- fsl,espi-num-chipselects = <4>;
- };
-
- sdhc: sdhc@114000 {
- compatible = "fsl,p5020-esdhc", "fsl,esdhc";
- reg = <0x114000 0x1000>;
- interrupts = <48 2 0 0>;
- sdhci,auto-cmd12;
- clock-frequency = <0>;
- };
-
- i2c@118000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x118000 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@118100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x118100 0x100>;
- interrupts = <38 2 0 0>;
- dfsrr;
- };
-
- i2c@119000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <2>;
- compatible = "fsl-i2c";
- reg = <0x119000 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- i2c@119100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <3>;
- compatible = "fsl-i2c";
- reg = <0x119100 0x100>;
- interrupts = <39 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@11c500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c500 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial1: serial@11c600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11c600 0x100>;
- clock-frequency = <0>;
- interrupts = <36 2 0 0>;
- };
-
- serial2: serial@11d500 {
- cell-index = <2>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d500 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- serial3: serial@11d600 {
- cell-index = <3>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x11d600 0x100>;
- clock-frequency = <0>;
- interrupts = <37 2 0 0>;
- };
-
- gpio0: gpio@130000 {
- compatible = "fsl,p5020-gpio", "fsl,qoriq-gpio";
- reg = <0x130000 0x1000>;
- interrupts = <55 2 0 0>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- usb0: usb@210000 {
- compatible = "fsl,p5020-usb2-mph",
- "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <44 0x2 0 0>;
- phy_type = "utmi";
- port0;
- };
-
- usb1: usb@211000 {
- compatible = "fsl,p5020-usb2-dr",
- "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <45 0x2 0 0>;
- dr_mode = "host";
- phy_type = "utmi";
- };
-
- sata@220000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- };
-
- sata@221000 {
- compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
- reg = <0x221000 0x1000>;
- interrupts = <69 0x2 0 0>;
- };
-
- crypto: crypto@300000 {
- compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupts = <92 2 0 0>;
-
- sec_jr0: jr@1000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupts = <88 2 0 0>;
- };
-
- sec_jr1: jr@2000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupts = <89 2 0 0>;
- };
-
- sec_jr2: jr@3000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupts = <90 2 0 0>;
- };
-
- sec_jr3: jr@4000 {
- compatible = "fsl,sec-v4.2-job-ring",
- "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupts = <91 2 0 0>;
- };
-
- rtic@6000 {
- compatible = "fsl,sec-v4.2-rtic",
- "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a@0 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b@20 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c@40 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d@60 {
- compatible = "fsl,sec-v4.2-rtic-memory",
- "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon@314000 {
- compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- interrupts = <93 2 0 0>;
- };
- };
-
-/*
- rapidio0: rapidio@ffe0c0000
-*/
-
- localbus@ffe124000 {
- compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- pci0: pcie@ffe200000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi0>;
- interrupts = <16 2 1 15>;
-
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
- };
-
- pci1: pcie@ffe201000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi1>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
- };
-
- pci2: pcie@ffe202000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 13>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 13>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 42 1 0 0
- 0000 0 0 2 &mpic 9 1 0 0
- 0000 0 0 3 &mpic 10 1 0 0
- 0000 0 0 4 &mpic 11 1 0 0
- >;
- };
- };
-
- pci3: pcie@ffe203000 {
- compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <0x1fca055>;
- fsl,msi = <&msi2>;
- interrupts = <16 2 1 12>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 12>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 43 1 0 0
- 0000 0 0 2 &mpic 0 1 0 0
- 0000 0 0 3 &mpic 4 1 0 0
- 0000 0 0 4 &mpic 8 1 0 0
- >;
- };
- };
-};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 0dc90f9bd81..b1e45a8537a 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -222,7 +222,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 0x8>;
@@ -232,7 +232,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <10 0x8>;
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 94a33225171..77be77116c2 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -316,7 +316,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <0x2a 0x2>;
@@ -326,7 +326,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <0x2a 0x2>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index ee5538feb45..56bebce8784 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -347,7 +347,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -357,7 +357,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <28 2>;
diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
index 38c35404bdc..134a5ff917e 100644
--- a/arch/powerpc/boot/dts/socrates.dts
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -199,7 +199,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -209,7 +209,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index eab680ce10d..2a555738517 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -74,7 +74,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <115200>;
@@ -85,7 +85,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x20>;
clock-frequency = <97553800>; /* Hz */
current-speed = <9600>;
diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts
index 49efd44057d..4f166b01c1b 100644
--- a/arch/powerpc/boot/dts/stxssa8555.dts
+++ b/arch/powerpc/boot/dts/stxssa8555.dts
@@ -210,7 +210,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -220,7 +220,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 0a4cedbdcb5..ed264d9ae35 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -250,7 +250,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -260,7 +260,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index f49d0918131..92524211581 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -224,7 +224,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -234,7 +234,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index d918752b120..6e1ac50852a 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -305,7 +305,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
@@ -316,7 +316,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 988d887c97f..161e75eac7f 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -305,7 +305,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
@@ -316,7 +316,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
current-speed = <115200>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 81bad8cd375..aa6ff0d3dd9 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -224,7 +224,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
@@ -234,7 +234,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts
index ac0a617b429..cc00f4ddd9a 100644
--- a/arch/powerpc/boot/dts/xcalibur1501.dts
+++ b/arch/powerpc/boot/dts/xcalibur1501.dts
@@ -531,7 +531,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -542,7 +542,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts
index c41a80c55e4..8fd7b703135 100644
--- a/arch/powerpc/boot/dts/xpedite5200.dts
+++ b/arch/powerpc/boot/dts/xpedite5200.dts
@@ -333,7 +333,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
current-speed = <115200>;
@@ -344,7 +344,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
current-speed = <115200>;
diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
index c0efcbb4513..0baa8283d08 100644
--- a/arch/powerpc/boot/dts/xpedite5200_xmon.dts
+++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts
@@ -337,7 +337,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
current-speed = <9600>;
@@ -348,7 +348,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
current-speed = <9600>;
diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts
index db7faf5ebb3..53c1c6a9752 100644
--- a/arch/powerpc/boot/dts/xpedite5301.dts
+++ b/arch/powerpc/boot/dts/xpedite5301.dts
@@ -441,7 +441,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -452,7 +452,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts
index c364ca6ff7d..21522598315 100644
--- a/arch/powerpc/boot/dts/xpedite5330.dts
+++ b/arch/powerpc/boot/dts/xpedite5330.dts
@@ -477,7 +477,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -488,7 +488,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts
index 7a8a4afd56c..11dbda10d75 100644
--- a/arch/powerpc/boot/dts/xpedite5370.dts
+++ b/arch/powerpc/boot/dts/xpedite5370.dts
@@ -439,7 +439,7 @@
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
@@ -450,7 +450,7 @@
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
- compatible = "ns16550";
+ compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c
new file mode 100644
index 00000000000..925ae43b746
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-currituck.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ * Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define MAX_RANKS 0x4
+#define DDR3_MR0CF 0x80010011U
+
+static unsigned long long ibm_currituck_memsize;
+static unsigned long long ibm_currituck_detect_memsize(void)
+{
+ u32 reg;
+ unsigned i;
+ unsigned long long memsize = 0;
+
+ for(i = 0; i < MAX_RANKS; i++){
+ reg = mfdcrx(DDR3_MR0CF + i);
+
+ if (!(reg & 1))
+ continue;
+
+ reg &= 0x0000f000;
+ reg >>= 12;
+ memsize += (0x800000ULL << reg);
+ }
+
+ return memsize;
+}
+
+static void ibm_currituck_fixups(void)
+{
+ void *devp = finddevice("/");
+ u32 dma_ranges[7];
+
+ dt_fixup_memory(0x0ULL, ibm_currituck_memsize);
+
+ while ((devp = find_node_by_devtype(devp, "pci"))) {
+ if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) {
+ printf("%s: Failed to get dma-ranges\r\n", __func__);
+ continue;
+ }
+
+ dma_ranges[5] = ibm_currituck_memsize >> 32;
+ dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL;
+
+ setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
+ }
+}
+
+#define SPRN_PIR 0x11E /* Processor Indentification Register */
+void platform_init(void)
+{
+ unsigned long end_of_ram, avail_ram;
+ u32 pir_reg;
+ int node, size;
+ const u32 *timebase;
+
+ ibm_currituck_memsize = ibm_currituck_detect_memsize();
+ if (ibm_currituck_memsize >> 32)
+ end_of_ram = ~0UL;
+ else
+ end_of_ram = ibm_currituck_memsize;
+ avail_ram = end_of_ram - (unsigned long)_end;
+
+ simple_alloc_init(_end, avail_ram, 128, 64);
+ platform_ops.fixups = ibm_currituck_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ pir_reg = mfspr(SPRN_PIR);
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+ fdt_init(_dtb_start);
+
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index c74531af72c..f090e6d2907 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -163,7 +163,7 @@ coff)
link_address='0x500000'
pie=
;;
-miboot|uboot)
+miboot|uboot*)
# miboot and U-boot want just the bare bits, not an ELF binary
ext=bin
objflags="-O binary"
@@ -244,6 +244,9 @@ gamecube|wii)
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
+treeboot-currituck)
+ link_address='0x1000000'
+ ;;
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
@@ -257,6 +260,8 @@ vmz="$tmpdir/`basename \"$kernel\"`.$ext"
if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+ strip_size=$(stat -c %s $vmz.$$)
+
if [ -n "$gzip" ]; then
gzip -n -f -9 "$vmz.$$"
fi
@@ -266,6 +271,24 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
else
vmz="$vmz.$$"
fi
+else
+ # Calculate the vmlinux.strip size
+ ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
+ strip_size=$(stat -c %s $vmz.$$)
+ rm -f $vmz.$$
+fi
+
+# Round the size to next higher MB limit
+round_size=$(((strip_size + 0xfffff) & 0xfff00000))
+
+round_size=0x$(printf "%x" $round_size)
+link_addr=$(printf "%d" $link_address)
+
+if [ $link_addr -lt $strip_size ]; then
+ echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
+ "overlaps the address of the wrapper($link_address)"
+ echo "INFO: Fixing the link_address of wrapper to ($round_size)"
+ link_address=$round_size
fi
vmz="$vmz$gzip"
@@ -291,6 +314,26 @@ uboot)
fi
exit 0
;;
+uboot-obs600)
+ rm -f "$ofile"
+ # obs600 wants a multi image with an initrd, so we need to put a fake
+ # one in even when building a "normal" image.
+ if [ -n "$initrd" ]; then
+ real_rd="$initrd"
+ else
+ real_rd=`mktemp`
+ echo "\0" >>"$real_rd"
+ fi
+ ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
+ $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile"
+ if [ -z "$initrd" ]; then
+ rm -f "$real_rd"
+ fi
+ if [ -z "$cacheit" ]; then
+ rm -f "$vmz"
+ fi
+ exit 0
+ ;;
esac
addsec() {
diff --git a/arch/powerpc/configs/40x/klondike_defconfig b/arch/powerpc/configs/40x/klondike_defconfig
new file mode 100644
index 00000000000..c0d228dc73d
--- /dev/null
+++ b/arch/powerpc/configs/40x/klondike_defconfig
@@ -0,0 +1,55 @@
+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_WALNUT is not set
+CONFIG_APM8018X=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MIGRATION is not set
+# CONFIG_SUSPEND is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_AVERAGE=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_FTRACE is not set
diff --git a/arch/powerpc/configs/40x/obs600_defconfig b/arch/powerpc/configs/40x/obs600_defconfig
new file mode 100644
index 00000000000..91c110dad2d
--- /dev/null
+++ b/arch/powerpc/configs/40x/obs600_defconfig
@@ -0,0 +1,83 @@
+CONFIG_40x=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_WALNUT is not set
+CONFIG_OBS600=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MATH_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_NDFC=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_NETDEVICES=y
+CONFIG_IBM_EMAC=y
+CONFIG_IBM_EMAC_RXB=256
+CONFIG_IBM_EMAC_TXB=256
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IBM_IIC=y
+CONFIG_SENSORS_LM75=y
+CONFIG_THERMAL=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_EXT2_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig
new file mode 100644
index 00000000000..4192322f8a7
--- /dev/null
+++ b/arch/powerpc/configs/44x/currituck_defconfig
@@ -0,0 +1,110 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_CURRITUCK=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_E1000E=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_DEFAULT="n"
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index a6eb6ad05b2..ca00cf750d3 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -25,7 +25,8 @@ CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="root=/dev/issblk0"
# CONFIG_PCI is not set
CONFIG_ADVANCED_OPTIONS=y
-CONFIG_RELOCATABLE=y
+CONFIG_NONSTATIC_KERNEL=y
+CONFIG_DYNAMIC_MEMSTART=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
diff --git a/arch/powerpc/configs/chroma_defconfig b/arch/powerpc/configs/chroma_defconfig
new file mode 100644
index 00000000000..acf7fb28046
--- /dev/null
+++ b/arch/powerpc/configs/chroma_defconfig
@@ -0,0 +1,307 @@
+CONFIG_PPC64=y
+CONFIG_PPC_BOOK3E_64=y
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=256
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_COUNTERS=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_SCOM_DEBUGFS=y
+CONFIG_PPC_A2_DD2=y
+CONFIG_KVM_GUEST=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_NUMA=y
+# CONFIG_MIGRATION is not set
+CONFIG_PPC_64K_PAGES=y
+CONFIG_SCHED_SMT=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SECCOMP is not set
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NET_TCPPROBE=y
+# CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_DEBUG=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_MISC_DEVICES=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_SIL680=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_E1000E=y
+CONFIG_TIGON3=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HWMON is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1511=y
+CONFIG_RTC_DRV_DS1553=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_PPC_EMULATED_STATS=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_VIRQ_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_VIRTUALIZATION=y
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index f087de6ec03..f8aef205d22 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -37,6 +37,8 @@ CONFIG_FSL_LBC=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEASPM is not set
+CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -94,17 +96,17 @@ CONFIG_SATA_SIL24=y
CONFIG_SATA_SIL=y
CONFIG_PATA_SIL680=y
CONFIG_NETDEVICES=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_E1000=y
CONFIG_E1000E=y
-CONFIG_FSL_PQ_MDIO=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
@@ -155,6 +157,7 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 782822c32d1..7ed8d4cf271 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -23,6 +23,8 @@ CONFIG_P5020_DS=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
+CONFIG_RAPIDIO=y
+CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -57,7 +59,6 @@ CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -81,6 +82,7 @@ CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index a1e5a178a4a..f37a2ab4888 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -93,15 +92,14 @@ CONFIG_SATA_FSL=y
CONFIG_PATA_ALI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -120,6 +118,9 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -163,6 +164,10 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
@@ -182,6 +187,7 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
@@ -213,4 +219,5 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index dd1e41386c4..abdcd317cda 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,5 +1,4 @@
CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_EXPERIMENTAL=y
@@ -26,6 +25,7 @@ CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
+CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
@@ -94,15 +94,14 @@ CONFIG_SATA_FSL=y
CONFIG_PATA_ALI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_FS_ENET=y
+CONFIG_UCC_GETH=y
+CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_FS_ENET=y
-CONFIG_GIANFAR=y
-CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
@@ -121,6 +120,9 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -164,6 +166,10 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
@@ -183,6 +189,7 @@ CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
@@ -214,4 +221,5 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_TALITOS=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 535711fcb13..2156e077859 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -390,6 +390,11 @@ CONFIG_HUGETLBFS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 185c292b0f1..ded867871e9 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_NAMESPACES=y
+CONFIG_SPARSE_IRQ=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
# CONFIG_PERF_EVENTS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
@@ -17,6 +17,7 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
+# CONFIG_PPC_POWERNV is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_PS3=y
@@ -27,14 +28,14 @@ CONFIG_PS3_VRAM=m
CONFIG_PS3_LPM=m
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=y
CONFIG_KEXEC=y
-CONFIG_SPARSE_IRQ=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_SCHED_SMT=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
-CONFIG_PM=y
+CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
# CONFIG_SECCOMP is not set
# CONFIG_PCI is not set
@@ -81,20 +82,23 @@ CONFIG_SCSI_MULTI_LUN=y
CONFIG_MD=y
CONFIG_BLK_DEV_DM=m
CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_XILINX is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_JOYDEV=m
@@ -135,22 +139,21 @@ CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PS3=m
+CONFIG_RTC_DRV_PS3=y
+# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y
-CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
@@ -167,19 +170,17 @@ CONFIG_CIFS=m
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_STACKOVERFLOW=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index a72f2415a64..30e7d0d20e4 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -304,6 +304,11 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_ZLIB=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index d51df17c7e6..7e313f1ed18 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -34,3 +34,5 @@ header-y += termios.h
header-y += types.h
header-y += ucontext.h
header-y += unistd.h
+
+generic-y += rwsem.h
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e30442c539c..ad55a1ccb9f 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -201,6 +201,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0400000000000000)
#define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0800000000000000)
#define CPU_FTR_ICSWX LONG_ASM_CONST(0x1000000000000000)
+#define CPU_FTR_VMX_COPY LONG_ASM_CONST(0x2000000000000000)
#ifndef __ASSEMBLY__
@@ -425,7 +426,7 @@ extern const char *powerpc_base_platform;
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
- CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE)
+ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -437,7 +438,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
- CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+ CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX)
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3E
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index 6ec1c380a4d..487d46ff68a 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -110,11 +110,11 @@ static inline u64 cputime64_to_jiffies64(const cputime_t ct)
/*
* Convert cputime <-> microseconds
*/
-extern u64 __cputime_msec_factor;
+extern u64 __cputime_usec_factor;
static inline unsigned long cputime_to_usecs(const cputime_t ct)
{
- return mulhdu((__force u64) ct, __cputime_msec_factor) * USEC_PER_MSEC;
+ return mulhdu((__force u64) ct, __cputime_usec_factor);
}
static inline cputime_t usecs_to_cputime(const unsigned long us)
@@ -127,7 +127,7 @@ static inline cputime_t usecs_to_cputime(const unsigned long us)
sec = us / 1000000;
if (ct) {
ct *= tb_ticks_per_sec;
- do_div(ct, 1000);
+ do_div(ct, 1000000);
}
if (sec)
ct += (cputime_t) sec * tb_ticks_per_sec;
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
new file mode 100644
index 00000000000..b955012939a
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -0,0 +1,834 @@
+/* Freescale Integrated Flash Controller
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_FSL_IFC_H
+#define __ASM_FSL_IFC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+
+#define FSL_IFC_BANK_COUNT 4
+
+/*
+ * CSPR - Chip Select Property Register
+ */
+#define CSPR_BA 0xFFFF0000
+#define CSPR_BA_SHIFT 16
+#define CSPR_PORT_SIZE 0x00000180
+#define CSPR_PORT_SIZE_SHIFT 7
+/* Port Size 8 bit */
+#define CSPR_PORT_SIZE_8 0x00000080
+/* Port Size 16 bit */
+#define CSPR_PORT_SIZE_16 0x00000100
+/* Port Size 32 bit */
+#define CSPR_PORT_SIZE_32 0x00000180
+/* Write Protect */
+#define CSPR_WP 0x00000040
+#define CSPR_WP_SHIFT 6
+/* Machine Select */
+#define CSPR_MSEL 0x00000006
+#define CSPR_MSEL_SHIFT 1
+/* NOR */
+#define CSPR_MSEL_NOR 0x00000000
+/* NAND */
+#define CSPR_MSEL_NAND 0x00000002
+/* GPCM */
+#define CSPR_MSEL_GPCM 0x00000004
+/* Bank Valid */
+#define CSPR_V 0x00000001
+#define CSPR_V_SHIFT 0
+
+/*
+ * Address Mask Register
+ */
+#define IFC_AMASK_MASK 0xFFFF0000
+#define IFC_AMASK_SHIFT 16
+#define IFC_AMASK(n) (IFC_AMASK_MASK << \
+ (__ilog2(n) - IFC_AMASK_SHIFT))
+
+/*
+ * Chip Select Option Register IFC_NAND Machine
+ */
+/* Enable ECC Encoder */
+#define CSOR_NAND_ECC_ENC_EN 0x80000000
+#define CSOR_NAND_ECC_MODE_MASK 0x30000000
+/* 4 bit correction per 520 Byte sector */
+#define CSOR_NAND_ECC_MODE_4 0x00000000
+/* 8 bit correction per 528 Byte sector */
+#define CSOR_NAND_ECC_MODE_8 0x10000000
+/* Enable ECC Decoder */
+#define CSOR_NAND_ECC_DEC_EN 0x04000000
+/* Row Address Length */
+#define CSOR_NAND_RAL_MASK 0x01800000
+#define CSOR_NAND_RAL_SHIFT 20
+#define CSOR_NAND_RAL_1 0x00000000
+#define CSOR_NAND_RAL_2 0x00800000
+#define CSOR_NAND_RAL_3 0x01000000
+#define CSOR_NAND_RAL_4 0x01800000
+/* Page Size 512b, 2k, 4k */
+#define CSOR_NAND_PGS_MASK 0x00180000
+#define CSOR_NAND_PGS_SHIFT 16
+#define CSOR_NAND_PGS_512 0x00000000
+#define CSOR_NAND_PGS_2K 0x00080000
+#define CSOR_NAND_PGS_4K 0x00100000
+/* Spare region Size */
+#define CSOR_NAND_SPRZ_MASK 0x0000E000
+#define CSOR_NAND_SPRZ_SHIFT 13
+#define CSOR_NAND_SPRZ_16 0x00000000
+#define CSOR_NAND_SPRZ_64 0x00002000
+#define CSOR_NAND_SPRZ_128 0x00004000
+#define CSOR_NAND_SPRZ_210 0x00006000
+#define CSOR_NAND_SPRZ_218 0x00008000
+#define CSOR_NAND_SPRZ_224 0x0000A000
+/* Pages Per Block */
+#define CSOR_NAND_PB_MASK 0x00000700
+#define CSOR_NAND_PB_SHIFT 8
+#define CSOR_NAND_PB(n) ((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NAND_TRHZ_MASK 0x0000001C
+#define CSOR_NAND_TRHZ_SHIFT 2
+#define CSOR_NAND_TRHZ_20 0x00000000
+#define CSOR_NAND_TRHZ_40 0x00000004
+#define CSOR_NAND_TRHZ_60 0x00000008
+#define CSOR_NAND_TRHZ_80 0x0000000C
+#define CSOR_NAND_TRHZ_100 0x00000010
+/* Buffer control disable */
+#define CSOR_NAND_BCTLD 0x00000001
+
+/*
+ * Chip Select Option Register - NOR Flash Mode
+ */
+/* Enable Address shift Mode */
+#define CSOR_NOR_ADM_SHFT_MODE_EN 0x80000000
+/* Page Read Enable from NOR device */
+#define CSOR_NOR_PGRD_EN 0x10000000
+/* AVD Toggle Enable during Burst Program */
+#define CSOR_NOR_AVD_TGL_PGM_EN 0x01000000
+/* Address Data Multiplexing Shift */
+#define CSOR_NOR_ADM_MASK 0x0003E000
+#define CSOR_NOR_ADM_SHIFT_SHIFT 13
+#define CSOR_NOR_ADM_SHIFT(n) ((n) << CSOR_NOR_ADM_SHIFT_SHIFT)
+/* Type of the NOR device hooked */
+#define CSOR_NOR_NOR_MODE_AYSNC_NOR 0x00000000
+#define CSOR_NOR_NOR_MODE_AVD_NOR 0x00000020
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NOR_TRHZ_MASK 0x0000001C
+#define CSOR_NOR_TRHZ_SHIFT 2
+#define CSOR_NOR_TRHZ_20 0x00000000
+#define CSOR_NOR_TRHZ_40 0x00000004
+#define CSOR_NOR_TRHZ_60 0x00000008
+#define CSOR_NOR_TRHZ_80 0x0000000C
+#define CSOR_NOR_TRHZ_100 0x00000010
+/* Buffer control disable */
+#define CSOR_NOR_BCTLD 0x00000001
+
+/*
+ * Chip Select Option Register - GPCM Mode
+ */
+/* GPCM Mode - Normal */
+#define CSOR_GPCM_GPMODE_NORMAL 0x00000000
+/* GPCM Mode - GenericASIC */
+#define CSOR_GPCM_GPMODE_ASIC 0x80000000
+/* Parity Mode odd/even */
+#define CSOR_GPCM_PARITY_EVEN 0x40000000
+/* Parity Checking enable/disable */
+#define CSOR_GPCM_PAR_EN 0x20000000
+/* GPCM Timeout Count */
+#define CSOR_GPCM_GPTO_MASK 0x0F000000
+#define CSOR_GPCM_GPTO_SHIFT 24
+#define CSOR_GPCM_GPTO(n) ((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT)
+/* GPCM External Access Termination mode for read access */
+#define CSOR_GPCM_RGETA_EXT 0x00080000
+/* GPCM External Access Termination mode for write access */
+#define CSOR_GPCM_WGETA_EXT 0x00040000
+/* Address Data Multiplexing Shift */
+#define CSOR_GPCM_ADM_MASK 0x0003E000
+#define CSOR_GPCM_ADM_SHIFT_SHIFT 13
+#define CSOR_GPCM_ADM_SHIFT(n) ((n) << CSOR_GPCM_ADM_SHIFT_SHIFT)
+/* Generic ASIC Parity error indication delay */
+#define CSOR_GPCM_GAPERRD_MASK 0x00000180
+#define CSOR_GPCM_GAPERRD_SHIFT 7
+#define CSOR_GPCM_GAPERRD(n) (((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_GPCM_TRHZ_MASK 0x0000001C
+#define CSOR_GPCM_TRHZ_20 0x00000000
+#define CSOR_GPCM_TRHZ_40 0x00000004
+#define CSOR_GPCM_TRHZ_60 0x00000008
+#define CSOR_GPCM_TRHZ_80 0x0000000C
+#define CSOR_GPCM_TRHZ_100 0x00000010
+/* Buffer control disable */
+#define CSOR_GPCM_BCTLD 0x00000001
+
+/*
+ * Ready Busy Status Register (RB_STAT)
+ */
+/* CSn is READY */
+#define IFC_RB_STAT_READY_CS0 0x80000000
+#define IFC_RB_STAT_READY_CS1 0x40000000
+#define IFC_RB_STAT_READY_CS2 0x20000000
+#define IFC_RB_STAT_READY_CS3 0x10000000
+
+/*
+ * General Control Register (GCR)
+ */
+#define IFC_GCR_MASK 0x8000F800
+/* reset all IFC hardware */
+#define IFC_GCR_SOFT_RST_ALL 0x80000000
+/* Turnaroud Time of external buffer */
+#define IFC_GCR_TBCTL_TRN_TIME 0x0000F800
+#define IFC_GCR_TBCTL_TRN_TIME_SHIFT 11
+
+/*
+ * Common Event and Error Status Register (CM_EVTER_STAT)
+ */
+/* Chip select error */
+#define IFC_CM_EVTER_STAT_CSER 0x80000000
+
+/*
+ * Common Event and Error Enable Register (CM_EVTER_EN)
+ */
+/* Chip select error checking enable */
+#define IFC_CM_EVTER_EN_CSEREN 0x80000000
+
+/*
+ * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN)
+ */
+/* Chip select error interrupt enable */
+#define IFC_CM_EVTER_INTR_EN_CSERIREN 0x80000000
+
+/*
+ * Common Transfer Error Attribute Register-0 (CM_ERATTR0)
+ */
+/* transaction type of error Read/Write */
+#define IFC_CM_ERATTR0_ERTYP_READ 0x80000000
+#define IFC_CM_ERATTR0_ERAID 0x0FF00000
+#define IFC_CM_ERATTR0_ERAID_SHIFT 20
+#define IFC_CM_ERATTR0_ESRCID 0x0000FF00
+#define IFC_CM_ERATTR0_ESRCID_SHIFT 8
+
+/*
+ * Clock Control Register (CCR)
+ */
+#define IFC_CCR_MASK 0x0F0F8800
+/* Clock division ratio */
+#define IFC_CCR_CLK_DIV_MASK 0x0F000000
+#define IFC_CCR_CLK_DIV_SHIFT 24
+#define IFC_CCR_CLK_DIV(n) ((n-1) << IFC_CCR_CLK_DIV_SHIFT)
+/* IFC Clock Delay */
+#define IFC_CCR_CLK_DLY_MASK 0x000F0000
+#define IFC_CCR_CLK_DLY_SHIFT 16
+#define IFC_CCR_CLK_DLY(n) ((n) << IFC_CCR_CLK_DLY_SHIFT)
+/* Invert IFC clock before sending out */
+#define IFC_CCR_INV_CLK_EN 0x00008000
+/* Fedback IFC Clock */
+#define IFC_CCR_FB_IFC_CLK_SEL 0x00000800
+
+/*
+ * Clock Status Register (CSR)
+ */
+/* Clk is stable */
+#define IFC_CSR_CLK_STAT_STABLE 0x80000000
+
+/*
+ * IFC_NAND Machine Specific Registers
+ */
+/*
+ * NAND Configuration Register (NCFGR)
+ */
+/* Auto Boot Mode */
+#define IFC_NAND_NCFGR_BOOT 0x80000000
+/* Addressing Mode-ROW0+n/COL0 */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000
+/* Addressing Mode-ROW0+n/COL0+n */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC1 0x00400000
+/* Number of loop iterations of FIR sequences for multi page operations */
+#define IFC_NAND_NCFGR_NUM_LOOP_MASK 0x0000F000
+#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT 12
+#define IFC_NAND_NCFGR_NUM_LOOP(n) ((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT)
+/* Number of wait cycles */
+#define IFC_NAND_NCFGR_NUM_WAIT_MASK 0x000000FF
+#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT 0
+
+/*
+ * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1)
+ */
+/* General purpose FCM flash command bytes CMD0-CMD7 */
+#define IFC_NAND_FCR0_CMD0 0xFF000000
+#define IFC_NAND_FCR0_CMD0_SHIFT 24
+#define IFC_NAND_FCR0_CMD1 0x00FF0000
+#define IFC_NAND_FCR0_CMD1_SHIFT 16
+#define IFC_NAND_FCR0_CMD2 0x0000FF00
+#define IFC_NAND_FCR0_CMD2_SHIFT 8
+#define IFC_NAND_FCR0_CMD3 0x000000FF
+#define IFC_NAND_FCR0_CMD3_SHIFT 0
+#define IFC_NAND_FCR1_CMD4 0xFF000000
+#define IFC_NAND_FCR1_CMD4_SHIFT 24
+#define IFC_NAND_FCR1_CMD5 0x00FF0000
+#define IFC_NAND_FCR1_CMD5_SHIFT 16
+#define IFC_NAND_FCR1_CMD6 0x0000FF00
+#define IFC_NAND_FCR1_CMD6_SHIFT 8
+#define IFC_NAND_FCR1_CMD7 0x000000FF
+#define IFC_NAND_FCR1_CMD7_SHIFT 0
+
+/*
+ * Flash ROW and COL Address Register (ROWn, COLn)
+ */
+/* Main/spare region locator */
+#define IFC_NAND_COL_MS 0x80000000
+/* Column Address */
+#define IFC_NAND_COL_CA_MASK 0x00000FFF
+
+/*
+ * NAND Flash Byte Count Register (NAND_BC)
+ */
+/* Byte Count for read/Write */
+#define IFC_NAND_BC 0x000001FF
+
+/*
+ * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2)
+ */
+/* NAND Machine specific opcodes OP0-OP14*/
+#define IFC_NAND_FIR0_OP0 0xFC000000
+#define IFC_NAND_FIR0_OP0_SHIFT 26
+#define IFC_NAND_FIR0_OP1 0x03F00000
+#define IFC_NAND_FIR0_OP1_SHIFT 20
+#define IFC_NAND_FIR0_OP2 0x000FC000
+#define IFC_NAND_FIR0_OP2_SHIFT 14
+#define IFC_NAND_FIR0_OP3 0x00003F00
+#define IFC_NAND_FIR0_OP3_SHIFT 8
+#define IFC_NAND_FIR0_OP4 0x000000FC
+#define IFC_NAND_FIR0_OP4_SHIFT 2
+#define IFC_NAND_FIR1_OP5 0xFC000000
+#define IFC_NAND_FIR1_OP5_SHIFT 26
+#define IFC_NAND_FIR1_OP6 0x03F00000
+#define IFC_NAND_FIR1_OP6_SHIFT 20
+#define IFC_NAND_FIR1_OP7 0x000FC000
+#define IFC_NAND_FIR1_OP7_SHIFT 14
+#define IFC_NAND_FIR1_OP8 0x00003F00
+#define IFC_NAND_FIR1_OP8_SHIFT 8
+#define IFC_NAND_FIR1_OP9 0x000000FC
+#define IFC_NAND_FIR1_OP9_SHIFT 2
+#define IFC_NAND_FIR2_OP10 0xFC000000
+#define IFC_NAND_FIR2_OP10_SHIFT 26
+#define IFC_NAND_FIR2_OP11 0x03F00000
+#define IFC_NAND_FIR2_OP11_SHIFT 20
+#define IFC_NAND_FIR2_OP12 0x000FC000
+#define IFC_NAND_FIR2_OP12_SHIFT 14
+#define IFC_NAND_FIR2_OP13 0x00003F00
+#define IFC_NAND_FIR2_OP13_SHIFT 8
+#define IFC_NAND_FIR2_OP14 0x000000FC
+#define IFC_NAND_FIR2_OP14_SHIFT 2
+
+/*
+ * Instruction opcodes to be programmed
+ * in FIR registers- 6bits
+ */
+enum ifc_nand_fir_opcodes {
+ IFC_FIR_OP_NOP,
+ IFC_FIR_OP_CA0,
+ IFC_FIR_OP_CA1,
+ IFC_FIR_OP_CA2,
+ IFC_FIR_OP_CA3,
+ IFC_FIR_OP_RA0,
+ IFC_FIR_OP_RA1,
+ IFC_FIR_OP_RA2,
+ IFC_FIR_OP_RA3,
+ IFC_FIR_OP_CMD0,
+ IFC_FIR_OP_CMD1,
+ IFC_FIR_OP_CMD2,
+ IFC_FIR_OP_CMD3,
+ IFC_FIR_OP_CMD4,
+ IFC_FIR_OP_CMD5,
+ IFC_FIR_OP_CMD6,
+ IFC_FIR_OP_CMD7,
+ IFC_FIR_OP_CW0,
+ IFC_FIR_OP_CW1,
+ IFC_FIR_OP_CW2,
+ IFC_FIR_OP_CW3,
+ IFC_FIR_OP_CW4,
+ IFC_FIR_OP_CW5,
+ IFC_FIR_OP_CW6,
+ IFC_FIR_OP_CW7,
+ IFC_FIR_OP_WBCD,
+ IFC_FIR_OP_RBCD,
+ IFC_FIR_OP_BTRD,
+ IFC_FIR_OP_RDSTAT,
+ IFC_FIR_OP_NWAIT,
+ IFC_FIR_OP_WFR,
+ IFC_FIR_OP_SBRD,
+ IFC_FIR_OP_UA,
+ IFC_FIR_OP_RB,
+};
+
+/*
+ * NAND Chip Select Register (NAND_CSEL)
+ */
+#define IFC_NAND_CSEL 0x0C000000
+#define IFC_NAND_CSEL_SHIFT 26
+#define IFC_NAND_CSEL_CS0 0x00000000
+#define IFC_NAND_CSEL_CS1 0x04000000
+#define IFC_NAND_CSEL_CS2 0x08000000
+#define IFC_NAND_CSEL_CS3 0x0C000000
+
+/*
+ * NAND Operation Sequence Start (NANDSEQ_STRT)
+ */
+/* NAND Flash Operation Start */
+#define IFC_NAND_SEQ_STRT_FIR_STRT 0x80000000
+/* Automatic Erase */
+#define IFC_NAND_SEQ_STRT_AUTO_ERS 0x00800000
+/* Automatic Program */
+#define IFC_NAND_SEQ_STRT_AUTO_PGM 0x00100000
+/* Automatic Copyback */
+#define IFC_NAND_SEQ_STRT_AUTO_CPB 0x00020000
+/* Automatic Read Operation */
+#define IFC_NAND_SEQ_STRT_AUTO_RD 0x00004000
+/* Automatic Status Read */
+#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD 0x00000800
+
+/*
+ * NAND Event and Error Status Register (NAND_EVTER_STAT)
+ */
+/* Operation Complete */
+#define IFC_NAND_EVTER_STAT_OPC 0x80000000
+/* Flash Timeout Error */
+#define IFC_NAND_EVTER_STAT_FTOER 0x08000000
+/* Write Protect Error */
+#define IFC_NAND_EVTER_STAT_WPER 0x04000000
+/* ECC Error */
+#define IFC_NAND_EVTER_STAT_ECCER 0x02000000
+/* RCW Load Done */
+#define IFC_NAND_EVTER_STAT_RCW_DN 0x00008000
+/* Boot Loadr Done */
+#define IFC_NAND_EVTER_STAT_BOOT_DN 0x00004000
+/* Bad Block Indicator search select */
+#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE 0x00000800
+
+/*
+ * NAND Flash Page Read Completion Event Status Register
+ * (PGRDCMPL_EVT_STAT)
+ */
+#define PGRDCMPL_EVT_STAT_MASK 0xFFFF0000
+/* Small Page 0-15 Done */
+#define PGRDCMPL_EVT_STAT_SECTION_SP(n) (1 << (31 - (n)))
+/* Large Page(2K) 0-3 Done */
+#define PGRDCMPL_EVT_STAT_LP_2K(n) (0xF << (28 - (n)*4))
+/* Large Page(4K) 0-1 Done */
+#define PGRDCMPL_EVT_STAT_LP_4K(n) (0xFF << (24 - (n)*8))
+
+/*
+ * NAND Event and Error Enable Register (NAND_EVTER_EN)
+ */
+/* Operation complete event enable */
+#define IFC_NAND_EVTER_EN_OPC_EN 0x80000000
+/* Page read complete event enable */
+#define IFC_NAND_EVTER_EN_PGRDCMPL_EN 0x20000000
+/* Flash Timeout error enable */
+#define IFC_NAND_EVTER_EN_FTOER_EN 0x08000000
+/* Write Protect error enable */
+#define IFC_NAND_EVTER_EN_WPER_EN 0x04000000
+/* ECC error logging enable */
+#define IFC_NAND_EVTER_EN_ECCER_EN 0x02000000
+
+/*
+ * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN)
+ */
+/* Enable interrupt for operation complete */
+#define IFC_NAND_EVTER_INTR_OPCIR_EN 0x80000000
+/* Enable interrupt for Page read complete */
+#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN 0x20000000
+/* Enable interrupt for Flash timeout error */
+#define IFC_NAND_EVTER_INTR_FTOERIR_EN 0x08000000
+/* Enable interrupt for Write protect error */
+#define IFC_NAND_EVTER_INTR_WPERIR_EN 0x04000000
+/* Enable interrupt for ECC error*/
+#define IFC_NAND_EVTER_INTR_ECCERIR_EN 0x02000000
+
+/*
+ * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0)
+ */
+#define IFC_NAND_ERATTR0_MASK 0x0C080000
+/* Error on CS0-3 for NAND */
+#define IFC_NAND_ERATTR0_ERCS_CS0 0x00000000
+#define IFC_NAND_ERATTR0_ERCS_CS1 0x04000000
+#define IFC_NAND_ERATTR0_ERCS_CS2 0x08000000
+#define IFC_NAND_ERATTR0_ERCS_CS3 0x0C000000
+/* Transaction type of error Read/Write */
+#define IFC_NAND_ERATTR0_ERTTYPE_READ 0x00080000
+
+/*
+ * NAND Flash Status Register (NAND_FSR)
+ */
+/* First byte of data read from read status op */
+#define IFC_NAND_NFSR_RS0 0xFF000000
+/* Second byte of data read from read status op */
+#define IFC_NAND_NFSR_RS1 0x00FF0000
+
+/*
+ * ECC Error Status Registers (ECCSTAT0-ECCSTAT3)
+ */
+/* Number of ECC errors on sector n (n = 0-15) */
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT 24
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT 16
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT 8
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT 0
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT 24
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT 16
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT 8
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT 0
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT 24
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT 16
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT 8
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT 0
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK 0x0F000000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT 24
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK 0x000F0000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT 16
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK 0x00000F00
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT 8
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK 0x0000000F
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT 0
+
+/*
+ * NAND Control Register (NANDCR)
+ */
+#define IFC_NAND_NCR_FTOCNT_MASK 0x1E000000
+#define IFC_NAND_NCR_FTOCNT_SHIFT 25
+#define IFC_NAND_NCR_FTOCNT(n) ((_ilog2(n) - 8) << IFC_NAND_NCR_FTOCNT_SHIFT)
+
+/*
+ * NAND_AUTOBOOT_TRGR
+ */
+/* Trigger RCW load */
+#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD 0x80000000
+/* Trigget Auto Boot */
+#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD 0x20000000
+
+/*
+ * NAND_MDR
+ */
+/* 1st read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA0 0xFF000000
+/* 2nd read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA1 0x00FF0000
+
+/*
+ * NOR Machine Specific Registers
+ */
+/*
+ * NOR Event and Error Status Register (NOR_EVTER_STAT)
+ */
+/* NOR Command Sequence Operation Complete */
+#define IFC_NOR_EVTER_STAT_OPC_NOR 0x80000000
+/* Write Protect Error */
+#define IFC_NOR_EVTER_STAT_WPER 0x04000000
+/* Command Sequence Timeout Error */
+#define IFC_NOR_EVTER_STAT_STOER 0x01000000
+
+/*
+ * NOR Event and Error Enable Register (NOR_EVTER_EN)
+ */
+/* NOR Command Seq complete event enable */
+#define IFC_NOR_EVTER_EN_OPCEN_NOR 0x80000000
+/* Write Protect Error Checking Enable */
+#define IFC_NOR_EVTER_EN_WPEREN 0x04000000
+/* Timeout Error Enable */
+#define IFC_NOR_EVTER_EN_STOEREN 0x01000000
+
+/*
+ * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN)
+ */
+/* Enable interrupt for OPC complete */
+#define IFC_NOR_EVTER_INTR_OPCEN_NOR 0x80000000
+/* Enable interrupt for write protect error */
+#define IFC_NOR_EVTER_INTR_WPEREN 0x04000000
+/* Enable interrupt for timeout error */
+#define IFC_NOR_EVTER_INTR_STOEREN 0x01000000
+
+/*
+ * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_NOR_ERATTR0_ERSRCID 0xFF000000
+/* AXI ID for error transation */
+#define IFC_NOR_ERATTR0_ERAID 0x000FF000
+/* Chip select corresponds to NOR error */
+#define IFC_NOR_ERATTR0_ERCS_CS0 0x00000000
+#define IFC_NOR_ERATTR0_ERCS_CS1 0x00000010
+#define IFC_NOR_ERATTR0_ERCS_CS2 0x00000020
+#define IFC_NOR_ERATTR0_ERCS_CS3 0x00000030
+/* Type of transaction read/write */
+#define IFC_NOR_ERATTR0_ERTYPE_READ 0x00000001
+
+/*
+ * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2)
+ */
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP 0x000F0000
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER 0x00000F00
+
+/*
+ * NOR Control Register (NORCR)
+ */
+#define IFC_NORCR_MASK 0x0F0F0000
+/* No. of Address/Data Phase */
+#define IFC_NORCR_NUM_PHASE_MASK 0x0F000000
+#define IFC_NORCR_NUM_PHASE_SHIFT 24
+#define IFC_NORCR_NUM_PHASE(n) ((n-1) << IFC_NORCR_NUM_PHASE_SHIFT)
+/* Sequence Timeout Count */
+#define IFC_NORCR_STOCNT_MASK 0x000F0000
+#define IFC_NORCR_STOCNT_SHIFT 16
+#define IFC_NORCR_STOCNT(n) ((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT)
+
+/*
+ * GPCM Machine specific registers
+ */
+/*
+ * GPCM Event and Error Status Register (GPCM_EVTER_STAT)
+ */
+/* Timeout error */
+#define IFC_GPCM_EVTER_STAT_TOER 0x04000000
+/* Parity error */
+#define IFC_GPCM_EVTER_STAT_PER 0x01000000
+
+/*
+ * GPCM Event and Error Enable Register (GPCM_EVTER_EN)
+ */
+/* Timeout error enable */
+#define IFC_GPCM_EVTER_EN_TOER_EN 0x04000000
+/* Parity error enable */
+#define IFC_GPCM_EVTER_EN_PER_EN 0x01000000
+
+/*
+ * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN)
+ */
+/* Enable Interrupt for timeout error */
+#define IFC_GPCM_EEIER_TOERIR_EN 0x04000000
+/* Enable Interrupt for Parity error */
+#define IFC_GPCM_EEIER_PERIR_EN 0x01000000
+
+/*
+ * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERSRCID 0xFF000000
+/* AXI ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERAID 0x000FF000
+/* Chip select corresponds to GPCM error */
+#define IFC_GPCM_ERATTR0_ERCS_CS0 0x00000000
+#define IFC_GPCM_ERATTR0_ERCS_CS1 0x00000040
+#define IFC_GPCM_ERATTR0_ERCS_CS2 0x00000080
+#define IFC_GPCM_ERATTR0_ERCS_CS3 0x000000C0
+/* Type of transaction read/Write */
+#define IFC_GPCM_ERATTR0_ERTYPE_READ 0x00000001
+
+/*
+ * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2)
+ */
+/* On which beat of address/data parity error is observed */
+#define IFC_GPCM_ERATTR2_PERR_BEAT 0x00000C00
+/* Parity Error on byte */
+#define IFC_GPCM_ERATTR2_PERR_BYTE 0x000000F0
+/* Parity Error reported in addr or data phase */
+#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE 0x00000001
+
+/*
+ * GPCM Status Register (GPCM_STAT)
+ */
+#define IFC_GPCM_STAT_BSY 0x80000000 /* GPCM is busy */
+
+/*
+ * IFC Controller NAND Machine registers
+ */
+struct fsl_ifc_nand {
+ __be32 ncfgr;
+ u32 res1[0x4];
+ __be32 nand_fcr0;
+ __be32 nand_fcr1;
+ u32 res2[0x8];
+ __be32 row0;
+ u32 res3;
+ __be32 col0;
+ u32 res4;
+ __be32 row1;
+ u32 res5;
+ __be32 col1;
+ u32 res6;
+ __be32 row2;
+ u32 res7;
+ __be32 col2;
+ u32 res8;
+ __be32 row3;
+ u32 res9;
+ __be32 col3;
+ u32 res10[0x24];
+ __be32 nand_fbcr;
+ u32 res11;
+ __be32 nand_fir0;
+ __be32 nand_fir1;
+ __be32 nand_fir2;
+ u32 res12[0x10];
+ __be32 nand_csel;
+ u32 res13;
+ __be32 nandseq_strt;
+ u32 res14;
+ __be32 nand_evter_stat;
+ u32 res15;
+ __be32 pgrdcmpl_evt_stat;
+ u32 res16[0x2];
+ __be32 nand_evter_en;
+ u32 res17[0x2];
+ __be32 nand_evter_intr_en;
+ u32 res18[0x2];
+ __be32 nand_erattr0;
+ __be32 nand_erattr1;
+ u32 res19[0x10];
+ __be32 nand_fsr;
+ u32 res20;
+ __be32 nand_eccstat[4];
+ u32 res21[0x20];
+ __be32 nanndcr;
+ u32 res22[0x2];
+ __be32 nand_autoboot_trgr;
+ u32 res23;
+ __be32 nand_mdr;
+ u32 res24[0x5C];
+};
+
+/*
+ * IFC controller NOR Machine registers
+ */
+struct fsl_ifc_nor {
+ __be32 nor_evter_stat;
+ u32 res1[0x2];
+ __be32 nor_evter_en;
+ u32 res2[0x2];
+ __be32 nor_evter_intr_en;
+ u32 res3[0x2];
+ __be32 nor_erattr0;
+ __be32 nor_erattr1;
+ __be32 nor_erattr2;
+ u32 res4[0x4];
+ __be32 norcr;
+ u32 res5[0xEF];
+};
+
+/*
+ * IFC controller GPCM Machine registers
+ */
+struct fsl_ifc_gpcm {
+ __be32 gpcm_evter_stat;
+ u32 res1[0x2];
+ __be32 gpcm_evter_en;
+ u32 res2[0x2];
+ __be32 gpcm_evter_intr_en;
+ u32 res3[0x2];
+ __be32 gpcm_erattr0;
+ __be32 gpcm_erattr1;
+ __be32 gpcm_erattr2;
+ __be32 gpcm_stat;
+ u32 res4[0x1F3];
+};
+
+/*
+ * IFC Controller Registers
+ */
+struct fsl_ifc_regs {
+ __be32 ifc_rev;
+ u32 res1[0x3];
+ struct {
+ __be32 cspr;
+ u32 res2[0x2];
+ } cspr_cs[FSL_IFC_BANK_COUNT];
+ u32 res3[0x18];
+ struct {
+ __be32 amask;
+ u32 res4[0x2];
+ } amask_cs[FSL_IFC_BANK_COUNT];
+ u32 res5[0x18];
+ struct {
+ __be32 csor;
+ u32 res6[0x2];
+ } csor_cs[FSL_IFC_BANK_COUNT];
+ u32 res7[0x18];
+ struct {
+ __be32 ftim[4];
+ u32 res8[0x8];
+ } ftim_cs[FSL_IFC_BANK_COUNT];
+ u32 res9[0x60];
+ __be32 rb_stat;
+ u32 res10[0x2];
+ __be32 ifc_gcr;
+ u32 res11[0x2];
+ __be32 cm_evter_stat;
+ u32 res12[0x2];
+ __be32 cm_evter_en;
+ u32 res13[0x2];
+ __be32 cm_evter_intr_en;
+ u32 res14[0x2];
+ __be32 cm_erattr0;
+ __be32 cm_erattr1;
+ u32 res15[0x2];
+ __be32 ifc_ccr;
+ __be32 ifc_csr;
+ u32 res16[0x2EB];
+ struct fsl_ifc_nand ifc_nand;
+ struct fsl_ifc_nor ifc_nor;
+ struct fsl_ifc_gpcm ifc_gpcm;
+};
+
+extern unsigned int convert_ifc_address(phys_addr_t addr_base);
+extern int fsl_ifc_find(phys_addr_t addr_base);
+
+/* overview of the fsl ifc controller */
+
+struct fsl_ifc_ctrl {
+ /* device info */
+ struct device *dev;
+ struct fsl_ifc_regs __iomem *regs;
+ int irq;
+ int nand_irq;
+ spinlock_t lock;
+ void *nand;
+
+ u32 nand_stat;
+ wait_queue_head_t nand_wait;
+};
+
+extern struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+
+
+#endif /* __ASM_FSL_IFC_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 8a0b5ece8f7..420b45368fc 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -238,8 +238,6 @@ struct fsl_lbc_regs {
#define FPAR_LP_CI_SHIFT 0
__be32 fbcr; /**< Flash Byte Count Register */
#define FBCR_BC 0x00000FFF
- u8 res11[0x8];
- u8 res8[0xF00];
};
/*
@@ -294,6 +292,11 @@ struct fsl_lbc_ctrl {
/* status read from LTESR by irq handler */
unsigned int irq_status;
+
+#ifdef CONFIG_SUSPEND
+ /* save regs when system go to deep-sleep */
+ struct fsl_lbc_regs *saved_regs;
+#endif
};
extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base,
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 86004930a78..dfdb95bc59a 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -5,7 +5,6 @@
#include <asm/page.h>
extern struct kmem_cache *hugepte_cache;
-extern void __init reserve_hugetlb_gpages(void);
static inline pte_t *hugepd_page(hugepd_t hpd)
{
@@ -22,14 +21,14 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
unsigned pdshift)
{
/*
- * On 32-bit, we have multiple higher-level table entries that point to
- * the same hugepte. Just use the first one since they're all
+ * On FSL BookE, we have multiple higher-level table entries that
+ * point to the same hugepte. Just use the first one since they're all
* identical. So for that case, idx=0.
*/
unsigned long idx = 0;
pte_t *dir = hugepd_page(*hpdp);
-#ifdef CONFIG_PPC64
+#ifndef CONFIG_PPC_FSL_BOOK3E
idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
#endif
@@ -53,7 +52,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm,
}
#endif
-void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte);
+void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
+ pte_t pte);
void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
@@ -124,7 +124,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
{
+#ifdef HUGETLB_NEED_PRELOAD
+ /*
+ * The "return 1" forces a call of update_mmu_cache, which will write a
+ * TLB entry. Without this, platforms that don't do a write of the TLB
+ * entry in the TLB miss handler asm will fault ad infinitum.
+ */
+ ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+ return 1;
+#else
return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+#endif
}
static inline pte_t huge_ptep_get(pte_t *ptep)
@@ -142,14 +152,24 @@ static inline void arch_release_hugepage(struct page *page)
}
#else /* ! CONFIG_HUGETLB_PAGE */
-static inline void reserve_hugetlb_gpages(void)
-{
- pr_err("Cannot reserve gpages without hugetlb enabled\n");
-}
static inline void flush_hugetlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+
+/*
+ * FSL Book3E platforms require special gpage handling - the gpages
+ * are reserved early in the boot process by memblock instead of via
+ * the .dts as on IBM platforms.
+ */
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PPC_FSL_BOOK3E)
+extern void __init reserve_hugetlb_gpages(void);
+#else
+static inline void reserve_hugetlb_gpages(void)
+{
+}
#endif
#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index bffd062adf7..c9776202d7e 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -32,11 +32,11 @@
#ifndef __ASSEMBLY__
-#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE)
+#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_NONSTATIC_KERNEL)
extern void reserve_kdump_trampoline(void);
extern void setup_kdump_trampoline(void);
#else
-/* !CRASH_DUMP || RELOCATABLE */
+/* !CRASH_DUMP || !NONSTATIC_KERNEL */
static inline void reserve_kdump_trampoline(void) { ; }
static inline void setup_kdump_trampoline(void) { ; }
#endif
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index f921eb121d3..16d7e33d35e 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -49,7 +49,6 @@
#define KEXEC_STATE_REAL_MODE 2
#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
#include <asm/reg.h>
typedef void (*crash_shutdown_t)(void);
@@ -73,11 +72,6 @@ extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
extern int crashing_cpu;
extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
-extern cpumask_t cpus_in_sr;
-static inline int kexec_sr_activated(int cpu)
-{
- return cpumask_test_cpu(cpu, &cpus_in_sr);
-}
struct kimage;
struct pt_regs;
@@ -94,7 +88,6 @@ extern void reserve_crashkernel(void);
extern void machine_kexec_mask_interrupts(void);
#else /* !CONFIG_KEXEC */
-static inline int kexec_sr_activated(int cpu) { return 0; }
static inline void crash_kexec_secondary(struct pt_regs *regs) { }
static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index f77c708c67a..233f9ecae76 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -231,7 +231,7 @@ LV1_CALL(allocate_memory, 4, 2, 0 )
LV1_CALL(write_htab_entry, 4, 0, 1 )
LV1_CALL(construct_virtual_address_space, 3, 2, 2 )
LV1_CALL(invalidate_htab_entries, 5, 0, 3 )
-LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 )
+LV1_CALL(get_virtual_address_space_id_of_ppe, 0, 1, 4 )
LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 )
LV1_CALL(select_virtual_address_space, 1, 0, 7 )
LV1_CALL(pause, 1, 0, 9 )
@@ -264,7 +264,7 @@ LV1_CALL(configure_execution_time_variable, 1, 0, 77 )
LV1_CALL(get_spe_irq_outlet, 2, 1, 78 )
LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 )
LV1_CALL(create_repository_node, 6, 0, 90 )
-LV1_CALL(get_repository_node_value, 5, 2, 91 )
+LV1_CALL(read_repository_node, 5, 2, 91 )
LV1_CALL(modify_repository_node_value, 6, 0, 92 )
LV1_CALL(remove_repository_node, 4, 0, 93 )
LV1_CALL(read_htab_entries, 2, 5, 95 )
@@ -276,7 +276,7 @@ LV1_CALL(construct_io_irq_outlet, 1, 1, 120 )
LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 )
LV1_CALL(map_htab, 1, 1, 122 )
LV1_CALL(unmap_htab, 1, 0, 123 )
-LV1_CALL(get_version_info, 0, 1, 127 )
+LV1_CALL(get_version_info, 0, 2, 127 )
LV1_CALL(insert_htab_entry, 6, 3, 158 )
LV1_CALL(read_virtual_uart, 3, 1, 162 )
LV1_CALL(write_virtual_uart, 3, 1, 163 )
@@ -294,9 +294,9 @@ LV1_CALL(unmap_device_dma_region, 4, 0, 177 )
LV1_CALL(net_add_multicast_address, 4, 0, 185 )
LV1_CALL(net_remove_multicast_address, 4, 0, 186 )
LV1_CALL(net_start_tx_dma, 4, 0, 187 )
-LV1_CALL(net_stop_tx_dma, 3, 0, 188 )
+LV1_CALL(net_stop_tx_dma, 2, 0, 188 )
LV1_CALL(net_start_rx_dma, 4, 0, 189 )
-LV1_CALL(net_stop_rx_dma, 3, 0, 190 )
+LV1_CALL(net_stop_rx_dma, 2, 0, 190 )
LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 )
LV1_CALL(net_set_interrupt_mask, 4, 0, 193 )
LV1_CALL(net_control, 6, 2, 194 )
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index b540d6fcedd..bf37931d1ad 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -213,6 +213,9 @@ struct machdep_calls {
* allow assignment/enabling of the device. */
int (*pcibios_enable_device_hook)(struct pci_dev *);
+ /* Called after scan and before resource survey */
+ void (*pcibios_fixup_phb)(struct pci_controller *hose);
+
/* Called to shutdown machine specific hardware not already controlled
* by other drivers.
*/
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 0260ea5ec3c..f5f89cafebd 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -214,6 +214,10 @@ typedef struct {
unsigned int id;
unsigned int active;
unsigned long vdso_base;
+#ifdef CONFIG_PPC_ICSWX
+ struct spinlock *cop_lockp; /* guard cop related stuff */
+ unsigned long acop; /* mask of enabled coprocessor types */
+#endif /* CONFIG_PPC_ICSWX */
#ifdef CONFIG_PPC_MM_SLICES
u64 low_slices_psize; /* SLB page size encodings */
u64 high_slices_psize; /* 4 bits per slice for now */
@@ -254,6 +258,13 @@ extern int mmu_vmemmap_psize;
#ifdef CONFIG_PPC64
extern unsigned long linear_map_top;
+
+/*
+ * 64-bit booke platforms don't load the tlb in the tlb miss handler code.
+ * HUGETLB_NEED_PRELOAD handles this - it causes huge_ptep_set_access_flags to
+ * return 1, indicating that the tlb requires preloading.
+ */
+#define HUGETLB_NEED_PRELOAD
#endif
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index db645ec842b..412ba493cb9 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -312,10 +312,9 @@ extern void slb_set_size(u16 size);
* (i.e. everything above 0xC000000000000000), except the very top
* segment, which simplifies several things.
*
- * - We allow for 15 significant bits of ESID and 20 bits of
- * context for user addresses. i.e. 8T (43 bits) of address space for
- * up to 1M contexts (although the page table structure and context
- * allocation will need changes to take advantage of this).
+ * - We allow for 16 significant bits of ESID and 19 bits of
+ * context for user addresses. i.e. 16T (44 bits) of address space for
+ * up to half a million contexts.
*
* - The scramble function gives robust scattering in the hash
* table (at least based on some initial results). The previous
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
index e6fae49e0b7..67b4d983723 100644
--- a/arch/powerpc/include/asm/mpic.h
+++ b/arch/powerpc/include/asm/mpic.h
@@ -251,6 +251,9 @@ struct mpic_irq_save {
/* The instance data of a given MPIC */
struct mpic
{
+ /* The OpenFirmware dt node for this MPIC */
+ struct device_node *node;
+
/* The remapper for this MPIC */
struct irq_host *irqhost;
@@ -293,6 +296,9 @@ struct mpic
/* Register access method */
enum mpic_reg_type reg_type;
+ /* The physical base address of the MPIC */
+ phys_addr_t paddr;
+
/* The various ioremap'ed bases */
struct mpic_reg_bank gregs;
struct mpic_reg_bank tmregs;
@@ -331,11 +337,11 @@ struct mpic
* Note setting any ID (leaving those bits to 0) means standard MPIC
*/
-/* This is the primary controller, only that one has IPIs and
- * has afinity control. A non-primary MPIC always uses CPU0
- * registers only
+/*
+ * This is a secondary ("chained") controller; it only uses the CPU0
+ * registers. Primary controllers have IPIs and affinity control.
*/
-#define MPIC_PRIMARY 0x00000001
+#define MPIC_SECONDARY 0x00000001
/* Set this for a big-endian MPIC */
#define MPIC_BIG_ENDIAN 0x00000002
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 2893e8f5406..a4b28f165b6 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -109,6 +109,14 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_PCI_MAP_PE_DMA_WINDOW 44
#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45
#define OPAL_PCI_RESET 49
+#define OPAL_PCI_GET_HUB_DIAG_DATA 50
+#define OPAL_PCI_GET_PHB_DIAG_DATA 51
+#define OPAL_PCI_FENCE_PHB 52
+#define OPAL_PCI_REINIT 53
+#define OPAL_PCI_MASK_PE_ERROR 54
+#define OPAL_SET_SLOT_LED_STATUS 55
+#define OPAL_GET_EPOW_STATUS 56
+#define OPAL_SET_SYSTEM_ATTENTION_LED 57
#ifndef __ASSEMBLY__
@@ -169,7 +177,11 @@ enum OpalPendingState {
OPAL_EVENT_NVRAM = 0x2,
OPAL_EVENT_RTC = 0x4,
OPAL_EVENT_CONSOLE_OUTPUT = 0x8,
- OPAL_EVENT_CONSOLE_INPUT = 0x10
+ OPAL_EVENT_CONSOLE_INPUT = 0x10,
+ OPAL_EVENT_ERROR_LOG_AVAIL = 0x20,
+ OPAL_EVENT_ERROR_LOG = 0x40,
+ OPAL_EVENT_EPOW = 0x80,
+ OPAL_EVENT_LED_STATUS = 0x100
};
/* Machine check related definitions */
@@ -258,13 +270,49 @@ enum OpalPeAction {
OPAL_MAP_PE = 1
};
+enum OpalPeltvAction {
+ OPAL_REMOVE_PE_FROM_DOMAIN = 0,
+ OPAL_ADD_PE_TO_DOMAIN = 1
+};
+
+enum OpalMveEnableAction {
+ OPAL_DISABLE_MVE = 0,
+ OPAL_ENABLE_MVE = 1
+};
+
enum OpalPciResetAndReinitScope {
OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3,
OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5,
- OPAL_PCI_IODA_RESET = 6,
+ OPAL_PCI_IODA_TABLE_RESET = 6,
+};
+
+enum OpalPciResetState {
+ OPAL_DEASSERT_RESET = 0,
+ OPAL_ASSERT_RESET = 1
};
-enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 };
+enum OpalPciMaskAction {
+ OPAL_UNMASK_ERROR_TYPE = 0,
+ OPAL_MASK_ERROR_TYPE = 1
+};
+
+enum OpalSlotLedType {
+ OPAL_SLOT_LED_ID_TYPE = 0,
+ OPAL_SLOT_LED_FAULT_TYPE = 1
+};
+
+enum OpalLedAction {
+ OPAL_TURN_OFF_LED = 0,
+ OPAL_TURN_ON_LED = 1,
+ OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
+};
+
+enum OpalEpowStatus {
+ OPAL_EPOW_NONE = 0,
+ OPAL_EPOW_UPS = 1,
+ OPAL_EPOW_OVER_AMBIENT_TEMP = 2,
+ OPAL_EPOW_OVER_INTERNAL_TEMP = 3
+};
struct opal_machine_check_event {
enum OpalMCE_Version version:8; /* 0x00 */
@@ -314,8 +362,74 @@ struct opal_machine_check_event {
} u;
};
+/**
+ * This structure defines the overlay which will be used to store PHB error
+ * data upon request.
+ */
+enum {
+ OPAL_P7IOC_NUM_PEST_REGS = 128,
+};
+
+struct OpalIoP7IOCPhbErrorData {
+ uint32_t brdgCtl;
+
+ // P7IOC utl regs
+ uint32_t portStatusReg;
+ uint32_t rootCmplxStatus;
+ uint32_t busAgentStatus;
+
+ // P7IOC cfg regs
+ uint32_t deviceStatus;
+ uint32_t slotStatus;
+ uint32_t linkStatus;
+ uint32_t devCmdStatus;
+ uint32_t devSecStatus;
+
+ // cfg AER regs
+ uint32_t rootErrorStatus;
+ uint32_t uncorrErrorStatus;
+ uint32_t corrErrorStatus;
+ uint32_t tlpHdr1;
+ uint32_t tlpHdr2;
+ uint32_t tlpHdr3;
+ uint32_t tlpHdr4;
+ uint32_t sourceId;
+
+ uint32_t rsv3;
+
+ // Record data about the call to allocate a buffer.
+ uint64_t errorClass;
+ uint64_t correlator;
+
+ //P7IOC MMIO Error Regs
+ uint64_t p7iocPlssr; // n120
+ uint64_t p7iocCsr; // n110
+ uint64_t lemFir; // nC00
+ uint64_t lemErrorMask; // nC18
+ uint64_t lemWOF; // nC40
+ uint64_t phbErrorStatus; // nC80
+ uint64_t phbFirstErrorStatus; // nC88
+ uint64_t phbErrorLog0; // nCC0
+ uint64_t phbErrorLog1; // nCC8
+ uint64_t mmioErrorStatus; // nD00
+ uint64_t mmioFirstErrorStatus; // nD08
+ uint64_t mmioErrorLog0; // nD40
+ uint64_t mmioErrorLog1; // nD48
+ uint64_t dma0ErrorStatus; // nD80
+ uint64_t dma0FirstErrorStatus; // nD88
+ uint64_t dma0ErrorLog0; // nDC0
+ uint64_t dma0ErrorLog1; // nDC8
+ uint64_t dma1ErrorStatus; // nE00
+ uint64_t dma1FirstErrorStatus; // nE08
+ uint64_t dma1ErrorLog0; // nE40
+ uint64_t dma1ErrorLog1; // nE48
+ uint64_t pestA[OPAL_P7IOC_NUM_PEST_REGS];
+ uint64_t pestB[OPAL_P7IOC_NUM_PEST_REGS];
+};
+
typedef struct oppanel_line {
- /* XXX */
+ const char * line;
+ uint64_t line_len;
} oppanel_line_t;
/* API functions */
@@ -413,6 +527,15 @@ int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number,
uint64_t pci_mem_size);
int64_t opal_pci_reset(uint64_t phb_id, uint8_t reset_scope, uint8_t assert_state);
+int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer, uint64_t diag_buffer_len);
+int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer, uint64_t diag_buffer_len);
+int64_t opal_pci_fence_phb(uint64_t phb_id);
+int64_t opal_pci_reinit(uint64_t phb_id, uint8_t reinit_scope);
+int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action);
+int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action);
+int64_t opal_get_epow_status(uint64_t *status);
+int64_t opal_set_system_attention_led(uint8_t led_action);
+
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 17722c73ba2..269c05a36d9 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -135,6 +135,7 @@ struct paca_struct {
u8 hard_enabled; /* set if irqs are enabled in MSR */
u8 io_sync; /* writel() needs spin_unlock sync */
u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */
+ u8 nap_state_lost; /* NV GPR values lost in power7_idle */
#ifdef CONFIG_PPC_POWERNV
/* Pointer to OPAL machine check event structure set by the
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index dd9c4fd038e..f072e974f8a 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -92,20 +92,34 @@ extern unsigned int HPAGE_SHIFT;
#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET)
#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
-#if defined(CONFIG_RELOCATABLE)
+#if defined(CONFIG_NONSTATIC_KERNEL)
#ifndef __ASSEMBLY__
extern phys_addr_t memstart_addr;
extern phys_addr_t kernstart_addr;
+
+#ifdef CONFIG_RELOCATABLE_PPC32
+extern long long virt_phys_offset;
#endif
+
+#endif /* __ASSEMBLY__ */
#define PHYSICAL_START kernstart_addr
-#else
+
+#else /* !CONFIG_NONSTATIC_KERNEL */
#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START)
#endif
+/* See Description below for VIRT_PHYS_OFFSET */
+#ifdef CONFIG_RELOCATABLE_PPC32
+#define VIRT_PHYS_OFFSET virt_phys_offset
+#else
+#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START)
+#endif
+
+
#ifdef CONFIG_PPC64
#define MEMORY_START 0UL
-#elif defined(CONFIG_RELOCATABLE)
+#elif defined(CONFIG_NONSTATIC_KERNEL)
#define MEMORY_START memstart_addr
#else
#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
@@ -125,12 +139,77 @@ extern phys_addr_t kernstart_addr;
* determine MEMORY_START until then. However we can determine PHYSICAL_START
* from information at hand (program counter, TLB lookup).
*
+ * On BookE with RELOCATABLE (RELOCATABLE_PPC32)
+ *
+ * With RELOCATABLE_PPC32, we support loading the kernel at any physical
+ * address without any restriction on the page alignment.
+ *
+ * We find the runtime address of _stext and relocate ourselves based on
+ * the following calculation:
+ *
+ * virtual_base = ALIGN_DOWN(KERNELBASE,256M) +
+ * MODULO(_stext.run,256M)
+ * and create the following mapping:
+ *
+ * ALIGN_DOWN(_stext.run,256M) => ALIGN_DOWN(KERNELBASE,256M)
+ *
+ * When we process relocations, we cannot depend on the
+ * existing equation for the __va()/__pa() translations:
+ *
+ * __va(x) = (x) - PHYSICAL_START + KERNELBASE
+ *
+ * Where:
+ * PHYSICAL_START = kernstart_addr = Physical address of _stext
+ * KERNELBASE = Compiled virtual address of _stext.
+ *
+ * This formula holds true iff, kernel load address is TLB page aligned.
+ *
+ * In our case, we need to also account for the shift in the kernel Virtual
+ * address.
+ *
+ * E.g.,
+ *
+ * Let the kernel be loaded at 64MB and KERNELBASE be 0xc0000000 (same as PAGE_OFFSET).
+ * In this case, we would be mapping 0 to 0xc0000000, and kernstart_addr = 64M
+ *
+ * Now __va(1MB) = (0x100000) - (0x4000000) + 0xc0000000
+ * = 0xbc100000 , which is wrong.
+ *
+ * Rather, it should be : 0xc0000000 + 0x100000 = 0xc0100000
+ * according to our mapping.
+ *
+ * Hence we use the following formula to get the translations right:
+ *
+ * __va(x) = (x) - [ PHYSICAL_START - Effective KERNELBASE ]
+ *
+ * Where :
+ * PHYSICAL_START = dynamic load address.(kernstart_addr variable)
+ * Effective KERNELBASE = virtual_base =
+ * = ALIGN_DOWN(KERNELBASE,256M) +
+ * MODULO(PHYSICAL_START,256M)
+ *
+ * To make the cost of __va() / __pa() more light weight, we introduce
+ * a new variable virt_phys_offset, which will hold :
+ *
+ * virt_phys_offset = Effective KERNELBASE - PHYSICAL_START
+ * = ALIGN_DOWN(KERNELBASE,256M) -
+ * ALIGN_DOWN(PHYSICALSTART,256M)
+ *
+ * Hence :
+ *
+ * __va(x) = x - PHYSICAL_START + Effective KERNELBASE
+ * = x + virt_phys_offset
+ *
+ * and
+ * __pa(x) = x + PHYSICAL_START - Effective KERNELBASE
+ * = x - virt_phys_offset
+ *
* On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
* the other definitions for __va & __pa.
*/
#ifdef CONFIG_BOOKE
-#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE))
-#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET))
+#define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET)
#else
#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
@@ -290,6 +369,7 @@ extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
struct page *p);
extern int page_is_ram(unsigned long pfn);
+extern int devmem_is_allowed(unsigned long pfn);
#ifdef CONFIG_PPC_SMLPAR
void arch_free_page(struct page *page, int order);
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index fb40ede6bc0..fed85e6290e 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -130,7 +130,9 @@ do { \
#ifdef CONFIG_HUGETLB_PAGE
+#ifdef CONFIG_PPC_MM_SLICES
#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
#endif /* !CONFIG_HUGETLB_PAGE */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 56b879ab3a4..882b6aa6c85 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -153,8 +153,8 @@ struct pci_dn {
int pci_ext_config_space; /* for pci devices */
-#ifdef CONFIG_EEH
struct pci_dev *pcidev; /* back-pointer to the pci device */
+#ifdef CONFIG_EEH
int class_code; /* pci device class */
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
@@ -164,6 +164,10 @@ struct pci_dn {
int eeh_false_positives; /* # times this device reported #ff's */
u32 config_space[16]; /* saved PCI config space */
#endif
+#define IODA_INVALID_PE (-1)
+#ifdef CONFIG_PPC_POWERNV
+ int pe_number;
+#endif
};
/* Get the pointer to a device_node's pci_dn */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 49c3de582be..1c92013466e 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -184,8 +184,6 @@ extern void of_scan_pci_bridge(struct pci_dev *dev);
extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
-extern int pci_read_irq_line(struct pci_dev *dev);
-
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 88b0bd925a8..2e0e4110f7a 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -170,6 +170,9 @@ extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addre
#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
_PAGE_COHERENT | _PAGE_WRITETHRU))
+#define pgprot_cached_noncoherent(prot) \
+ (__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
+
#define pgprot_writecombine pgprot_noncached_wc
struct file;
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index eb11a446720..b585bff1a02 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -382,6 +382,9 @@ static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
}
#endif
+extern unsigned long cpuidle_disable;
+enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 559da199edb..7fdc2c0b7fa 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -951,6 +951,7 @@
#define PVR_403GCX 0x00201400
#define PVR_405GP 0x40110000
#define PVR_476 0x11a52000
+#define PVR_476FPE 0x7ff50000
#define PVR_STB03XXX 0x40310000
#define PVR_NP405H 0x41410000
#define PVR_NP405L 0x41610000
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 03c48e819c8..500fe1dc43e 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -187,6 +187,10 @@
#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
#endif
+#ifdef CONFIG_PPC_ICSWX
+#define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */
+#endif
+
/* Bit definitions for CCR1. */
#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
#define CCR1_TCS 0x00000080 /* Timer Clock Select */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 41f69ae79d4..01c143bb77a 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -245,6 +245,12 @@ extern int early_init_dt_scan_rtas(unsigned long node,
extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+#ifdef CONFIG_PPC_RTAS_DAEMON
+extern void rtas_cancel_event_scan(void);
+#else
+static inline void rtas_cancel_event_scan(void) { }
+#endif
+
/* Error types logged. */
#define ERR_FLAG_ALREADY_LOGGED 0x0
#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */
@@ -307,5 +313,17 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
extern void __cpuinit rtas_give_timebase(void);
extern void __cpuinit rtas_take_timebase(void);
+#ifdef CONFIG_PPC_RTAS
+static inline int page_is_rtas_user_buf(unsigned long pfn)
+{
+ unsigned long paddr = (pfn << PAGE_SHIFT);
+ if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_RMOBUF_MAX))
+ return 1;
+ return 0;
+}
+#else
+static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;}
+#endif
+
#endif /* __KERNEL__ */
#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
deleted file mode 100644
index bb1e2cdeb9b..00000000000
--- a/arch/powerpc/include/asm/rwsem.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _ASM_POWERPC_RWSEM_H
-#define _ASM_POWERPC_RWSEM_H
-
-#ifndef _LINUX_RWSEM_H
-#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
-#endif
-
-#ifdef __KERNEL__
-
-/*
- * R/W semaphores for PPC using the stuff in lib/rwsem.c.
- * Adapted largely from include/asm-i386/rwsem.h
- * by Paul Mackerras <paulus@samba.org>.
- */
-
-/*
- * the semaphore definition
- */
-#ifdef CONFIG_PPC64
-# define RWSEM_ACTIVE_MASK 0xffffffffL
-#else
-# define RWSEM_ACTIVE_MASK 0x0000ffffL
-#endif
-
-#define RWSEM_UNLOCKED_VALUE 0x00000000L
-#define RWSEM_ACTIVE_BIAS 0x00000001L
-#define RWSEM_WAITING_BIAS (-RWSEM_ACTIVE_MASK-1)
-#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
-#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-
-/*
- * lock for reading
- */
-static inline void __down_read(struct rw_semaphore *sem)
-{
- if (unlikely(atomic_long_inc_return((atomic_long_t *)&sem->count) <= 0))
- rwsem_down_read_failed(sem);
-}
-
-static inline int __down_read_trylock(struct rw_semaphore *sem)
-{
- long tmp;
-
- while ((tmp = sem->count) >= 0) {
- if (tmp == cmpxchg(&sem->count, tmp,
- tmp + RWSEM_ACTIVE_READ_BIAS)) {
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * lock for writing
- */
-static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
-{
- long tmp;
-
- tmp = atomic_long_add_return(RWSEM_ACTIVE_WRITE_BIAS,
- (atomic_long_t *)&sem->count);
- if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
- rwsem_down_write_failed(sem);
-}
-
-static inline void __down_write(struct rw_semaphore *sem)
-{
- __down_write_nested(sem, 0);
-}
-
-static inline int __down_write_trylock(struct rw_semaphore *sem)
-{
- long tmp;
-
- tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
- RWSEM_ACTIVE_WRITE_BIAS);
- return tmp == RWSEM_UNLOCKED_VALUE;
-}
-
-/*
- * unlock after reading
- */
-static inline void __up_read(struct rw_semaphore *sem)
-{
- long tmp;
-
- tmp = atomic_long_dec_return((atomic_long_t *)&sem->count);
- if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
- rwsem_wake(sem);
-}
-
-/*
- * unlock after writing
- */
-static inline void __up_write(struct rw_semaphore *sem)
-{
- if (unlikely(atomic_long_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
- (atomic_long_t *)&sem->count) < 0))
- rwsem_wake(sem);
-}
-
-/*
- * implement atomic add functionality
- */
-static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
-{
- atomic_long_add(delta, (atomic_long_t *)&sem->count);
-}
-
-/*
- * downgrade write lock to read lock
- */
-static inline void __downgrade_write(struct rw_semaphore *sem)
-{
- long tmp;
-
- tmp = atomic_long_add_return(-RWSEM_WAITING_BIAS,
- (atomic_long_t *)&sem->count);
- if (tmp < 0)
- rwsem_downgrade_wake(sem);
-}
-
-/*
- * implement exchange and add functionality
- */
-static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
-{
- return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index e30a13d1ee7..c377457d1b8 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -193,8 +193,8 @@ extern void cacheable_memzero(void *p, unsigned int nb);
extern void *cacheable_memcpy(void *, const void *, unsigned int);
extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void die(const char *, struct pt_regs *, long);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
#ifdef CONFIG_BOOKE_WDT
@@ -221,6 +221,15 @@ extern unsigned long klimit;
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
extern int powersave_nap; /* set if nap mode can be used in idle loop */
+void cpu_idle_wait(void);
+
+#ifdef CONFIG_PSERIES_IDLE
+extern void update_smt_snooze_delay(int snooze);
+extern int pseries_notify_cpuidle_add_cpu(int cpu);
+#else
+static inline void update_smt_snooze_delay(int snooze) {}
+static inline int pseries_notify_cpuidle_add_cpu(int cpu) { return 0; }
+#endif
/*
* Atomic exchange
diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
index f663634cccc..743f36b38e5 100644
--- a/arch/powerpc/include/asm/tce.h
+++ b/arch/powerpc/include/asm/tce.h
@@ -26,10 +26,14 @@
/*
* Tces come in two formats, one for the virtual bus and a different
- * format for PCI
+ * format for PCI. PCI TCEs can have hardware or software maintianed
+ * coherency.
*/
-#define TCE_VB 0
-#define TCE_PCI 1
+#define TCE_VB 0
+#define TCE_PCI 1
+#define TCE_PCI_SWINV_CREATE 2
+#define TCE_PCI_SWINV_FREE 4
+#define TCE_PCI_SWINV_PAIR 8
/* TCE page size is 4096 bytes (1 << 12) */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index fe6f7c2c9c6..7eb10fb96cd 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -219,5 +219,7 @@ DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
extern void secondary_cpu_time_init(void);
extern void iSeries_time_init_early(void);
+DECLARE_PER_CPU(u64, decrementers_next_tb);
+
#endif /* __KERNEL__ */
#endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 8947b9827bc..d82e94e6c2b 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -5,8 +5,11 @@
* This is here because we used to use l64 for 64bit powerpc
* and we don't want to impact user mode with our change to ll64
* in the kernel.
+ *
+ * However, some user programs are fine with this. They can
+ * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
*/
-#if defined(__powerpc64__) && !defined(__KERNEL__)
+#if !defined(__SANE_USERSPACE_TYPES__) && defined(__powerpc64__) && !defined(__KERNEL__)
# include <asm-generic/int-l64.h>
#else
# include <asm-generic/int-ll64.h>
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index ce4f7f17911..ee728e433aa 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -85,6 +85,8 @@ extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
+obj-$(CONFIG_RELOCATABLE_PPC32) += reloc_32.o
+
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 7c5324f1ec9..04caee7d9bc 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -208,6 +208,7 @@ int main(void)
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
+ DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
#endif /* CONFIG_PPC64 */
/* RTAS */
diff --git a/arch/powerpc/kernel/cpu_setup_a2.S b/arch/powerpc/kernel/cpu_setup_a2.S
index 7f818feaa7a..ebc62f42a23 100644
--- a/arch/powerpc/kernel/cpu_setup_a2.S
+++ b/arch/powerpc/kernel/cpu_setup_a2.S
@@ -41,11 +41,16 @@ _GLOBAL(__setup_cpu_a2)
* core local but doing it always won't hurt
*/
-#ifdef CONFIG_PPC_WSP_COPRO
+#ifdef CONFIG_PPC_ICSWX
/* Make sure ACOP starts out as zero */
li r3,0
mtspr SPRN_ACOP,r3
+ /* Skip the following if we are in Guest mode */
+ mfmsr r3
+ andis. r0,r3,MSR_GS@h
+ bne _icswx_skip_guest
+
/* Enable icswx instruction */
mfspr r3,SPRN_A2_CCR2
ori r3,r3,A2_CCR2_ENABLE_ICSWX
@@ -54,7 +59,8 @@ _GLOBAL(__setup_cpu_a2)
/* Unmask all CTs in HACOP */
li r3,-1
mtspr SPRN_HACOP,r3
-#endif /* CONFIG_PPC_WSP_COPRO */
+_icswx_skip_guest:
+#endif /* CONFIG_PPC_ICSWX */
/* Enable doorbell */
mfspr r3,SPRN_A2_CCR2
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index edae5bb06f1..81db9e2a8a2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1505,6 +1505,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_4xx,
.platform = "ppc405",
},
+ { /* APM8018X */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x7ff11432,
+ .cpu_name = "APM8018X",
+ .cpu_features = CPU_FTRS_40X,
+ .cpu_user_features = PPC_FEATURE_32 |
+ PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .machine_check = machine_check_4xx,
+ .platform = "ppc405",
+ },
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
@@ -1830,6 +1843,20 @@ static struct cpu_spec __initdata cpu_specs[] = {
.machine_check = machine_check_47x,
.platform = "ppc470",
},
+ { /* 476fpe */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x7ff50000,
+ .cpu_name = "476fpe",
+ .cpu_features = CPU_FTRS_47X | CPU_FTR_476_DD2,
+ .cpu_user_features = COMMON_USER_BOOKE |
+ PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_47x |
+ MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+ .icache_bsize = 32,
+ .dcache_bsize = 128,
+ .machine_check = machine_check_47x,
+ .platform = "ppc470",
+ },
{ /* 476 iss */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00050000,
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index d879809d5c4..28be3452e67 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -10,85 +10,85 @@
*
*/
-#undef DEBUG
-
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/reboot.h>
#include <linux/kexec.h>
-#include <linux/bootmem.h>
#include <linux/export.h>
#include <linux/crash_dump.h>
#include <linux/delay.h>
-#include <linux/elf.h>
-#include <linux/elfcore.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
-#include <linux/memblock.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/kexec.h>
#include <asm/kdump.h>
#include <asm/prom.h>
-#include <asm/firmware.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/setjmp.h>
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
+/*
+ * The primary CPU waits a while for all secondary CPUs to enter. This is to
+ * avoid sending an IPI if the secondary CPUs are entering
+ * crash_kexec_secondary on their own (eg via a system reset).
+ *
+ * The secondary timeout has to be longer than the primary. Both timeouts are
+ * in milliseconds.
+ */
+#define PRIMARY_TIMEOUT 500
+#define SECONDARY_TIMEOUT 1000
-/* This keeps a track of which one is crashing cpu. */
+#define IPI_TIMEOUT 10000
+#define REAL_MODE_TIMEOUT 10000
+
+/* This keeps a track of which one is the crashing cpu. */
int crashing_cpu = -1;
-static cpumask_t cpus_in_crash = CPU_MASK_NONE;
-cpumask_t cpus_in_sr = CPU_MASK_NONE;
+static atomic_t cpus_in_crash;
+static int time_to_dump;
#define CRASH_HANDLER_MAX 3
/* NULL terminated list of shutdown handles */
static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
static DEFINE_SPINLOCK(crash_handlers_lock);
+static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
+static int crash_shutdown_cpu = -1;
+
+static int handle_fault(struct pt_regs *regs)
+{
+ if (crash_shutdown_cpu == smp_processor_id())
+ longjmp(crash_shutdown_buf, 1);
+ return 0;
+}
+
#ifdef CONFIG_SMP
-static atomic_t enter_on_soft_reset = ATOMIC_INIT(0);
void crash_ipi_callback(struct pt_regs *regs)
{
+ static cpumask_t cpus_state_saved = CPU_MASK_NONE;
+
int cpu = smp_processor_id();
if (!cpu_online(cpu))
return;
hard_irq_disable();
- if (!cpumask_test_cpu(cpu, &cpus_in_crash))
+ if (!cpumask_test_cpu(cpu, &cpus_state_saved)) {
crash_save_cpu(regs, cpu);
- cpumask_set_cpu(cpu, &cpus_in_crash);
-
- /*
- * Entered via soft-reset - could be the kdump
- * process is invoked using soft-reset or user activated
- * it if some CPU did not respond to an IPI.
- * For soft-reset, the secondary CPU can enter this func
- * twice. 1 - using IPI, and 2. soft-reset.
- * Tell the kexec CPU that entered via soft-reset and ready
- * to go down.
- */
- if (cpumask_test_cpu(cpu, &cpus_in_sr)) {
- cpumask_clear_cpu(cpu, &cpus_in_sr);
- atomic_inc(&enter_on_soft_reset);
+ cpumask_set_cpu(cpu, &cpus_state_saved);
}
+ atomic_inc(&cpus_in_crash);
+ smp_mb__after_atomic_inc();
+
/*
* Starting the kdump boot.
* This barrier is needed to make sure that all CPUs are stopped.
- * If not, soft-reset will be invoked to bring other CPUs.
*/
- while (!cpumask_test_cpu(crashing_cpu, &cpus_in_crash))
+ while (!time_to_dump)
cpu_relax();
if (ppc_md.kexec_cpu_down)
@@ -103,106 +103,99 @@ void crash_ipi_callback(struct pt_regs *regs)
/* NOTREACHED */
}
-/*
- * Wait until all CPUs are entered via soft-reset.
- */
-static void crash_soft_reset_check(int cpu)
-{
- unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
-
- cpumask_clear_cpu(cpu, &cpus_in_sr);
- while (atomic_read(&enter_on_soft_reset) != ncpus)
- cpu_relax();
-}
-
-
static void crash_kexec_prepare_cpus(int cpu)
{
unsigned int msecs;
-
unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+ int tries = 0;
+ int (*old_handler)(struct pt_regs *regs);
+
+ printk(KERN_EMERG "Sending IPI to other CPUs\n");
crash_send_ipi(crash_ipi_callback);
smp_wmb();
+again:
/*
* FIXME: Until we will have the way to stop other CPUs reliably,
* the crash CPU will send an IPI and wait for other CPUs to
* respond.
- * Delay of at least 10 seconds.
*/
- printk(KERN_EMERG "Sending IPI to other cpus...\n");
- msecs = 10000;
- while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) {
- cpu_relax();
+ msecs = IPI_TIMEOUT;
+ while ((atomic_read(&cpus_in_crash) < ncpus) && (--msecs > 0))
mdelay(1);
- }
/* Would it be better to replace the trap vector here? */
+ if (atomic_read(&cpus_in_crash) >= ncpus) {
+ printk(KERN_EMERG "IPI complete\n");
+ return;
+ }
+
+ printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n",
+ ncpus - atomic_read(&cpus_in_crash));
+
/*
- * FIXME: In case if we do not get all CPUs, one possibility: ask the
- * user to do soft reset such that we get all.
- * Soft-reset will be used until better mechanism is implemented.
+ * If we have a panic timeout set then we can't wait indefinitely
+ * for someone to activate system reset. We also give up on the
+ * second time through if system reset fail to work.
*/
- if (cpumask_weight(&cpus_in_crash) < ncpus) {
- printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",
- ncpus - cpumask_weight(&cpus_in_crash));
- printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");
- cpumask_clear(&cpus_in_sr);
- atomic_set(&enter_on_soft_reset, 0);
- while (cpumask_weight(&cpus_in_crash) < ncpus)
- cpu_relax();
- }
+ if ((panic_timeout > 0) || (tries > 0))
+ return;
+
/*
- * Make sure all CPUs are entered via soft-reset if the kdump is
- * invoked using soft-reset.
+ * A system reset will cause all CPUs to take an 0x100 exception.
+ * The primary CPU returns here via setjmp, and the secondary
+ * CPUs reexecute the crash_kexec_secondary path.
*/
- if (cpumask_test_cpu(cpu, &cpus_in_sr))
- crash_soft_reset_check(cpu);
- /* Leave the IPI callback set */
+ old_handler = __debugger;
+ __debugger = handle_fault;
+ crash_shutdown_cpu = smp_processor_id();
+
+ if (setjmp(crash_shutdown_buf) == 0) {
+ printk(KERN_EMERG "Activate system reset (dumprestart) "
+ "to stop other cpu(s)\n");
+
+ /*
+ * A system reset will force all CPUs to execute the
+ * crash code again. We need to reset cpus_in_crash so we
+ * wait for everyone to do this.
+ */
+ atomic_set(&cpus_in_crash, 0);
+ smp_mb();
+
+ while (atomic_read(&cpus_in_crash) < ncpus)
+ cpu_relax();
+ }
+
+ crash_shutdown_cpu = -1;
+ __debugger = old_handler;
+
+ tries++;
+ goto again;
}
/*
- * This function will be called by secondary cpus or by kexec cpu
- * if soft-reset is activated to stop some CPUs.
+ * This function will be called by secondary cpus.
*/
void crash_kexec_secondary(struct pt_regs *regs)
{
- int cpu = smp_processor_id();
unsigned long flags;
- int msecs = 5;
+ int msecs = SECONDARY_TIMEOUT;
local_irq_save(flags);
- /* Wait 5ms if the kexec CPU is not entered yet. */
+
+ /* Wait for the primary crash CPU to signal its progress */
while (crashing_cpu < 0) {
if (--msecs < 0) {
- /*
- * Either kdump image is not loaded or
- * kdump process is not started - Probably xmon
- * exited using 'x'(exit and recover) or
- * kexec_should_crash() failed for all running tasks.
- */
- cpumask_clear_cpu(cpu, &cpus_in_sr);
+ /* No response, kdump image may not have been loaded */
local_irq_restore(flags);
return;
}
+
mdelay(1);
- cpu_relax();
- }
- if (cpu == crashing_cpu) {
- /*
- * Panic CPU will enter this func only via soft-reset.
- * Wait until all secondary CPUs entered and
- * then start kexec boot.
- */
- crash_soft_reset_check(cpu);
- cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
- if (ppc_md.kexec_cpu_down)
- ppc_md.kexec_cpu_down(1, 0);
- machine_kexec(kexec_crash_image);
- /* NOTREACHED */
}
+
crash_ipi_callback(regs);
}
@@ -211,7 +204,7 @@ void crash_kexec_secondary(struct pt_regs *regs)
static void crash_kexec_prepare_cpus(int cpu)
{
/*
- * move the secondarys to us so that we can copy
+ * move the secondaries to us so that we can copy
* the new kernel 0-0x100 safely
*
* do this if kexec in setup.c ?
@@ -225,7 +218,6 @@ static void crash_kexec_prepare_cpus(int cpu)
void crash_kexec_secondary(struct pt_regs *regs)
{
- cpumask_clear(&cpus_in_sr);
}
#endif /* CONFIG_SMP */
@@ -236,7 +228,7 @@ static void crash_kexec_wait_realmode(int cpu)
unsigned int msecs;
int i;
- msecs = 10000;
+ msecs = REAL_MODE_TIMEOUT;
for (i=0; i < nr_cpu_ids && msecs > 0; i++) {
if (i == cpu)
continue;
@@ -308,22 +300,11 @@ int crash_shutdown_unregister(crash_shutdown_t handler)
}
EXPORT_SYMBOL(crash_shutdown_unregister);
-static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
-static int crash_shutdown_cpu = -1;
-
-static int handle_fault(struct pt_regs *regs)
-{
- if (crash_shutdown_cpu == smp_processor_id())
- longjmp(crash_shutdown_buf, 1);
- return 0;
-}
-
void default_machine_crash_shutdown(struct pt_regs *regs)
{
unsigned int i;
int (*old_handler)(struct pt_regs *regs);
-
/*
* This function is only called after the system
* has panicked or is otherwise in a critical state.
@@ -341,15 +322,26 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
* such that another IPI will not be sent.
*/
crashing_cpu = smp_processor_id();
- crash_save_cpu(regs, crashing_cpu);
+
+ /*
+ * If we came in via system reset, wait a while for the secondary
+ * CPUs to enter.
+ */
+ if (TRAP(regs) == 0x100)
+ mdelay(PRIMARY_TIMEOUT);
+
crash_kexec_prepare_cpus(crashing_cpu);
- cpumask_set_cpu(crashing_cpu, &cpus_in_crash);
+
+ crash_save_cpu(regs, crashing_cpu);
+
+ time_to_dump = 1;
+
crash_kexec_wait_realmode(crashing_cpu);
machine_kexec_mask_interrupts();
/*
- * Call registered shutdown routines savely. Swap out
+ * Call registered shutdown routines safely. Swap out
* __debugger_fault_handler, and replace on exit.
*/
old_handler = __debugger_fault_handler;
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 424afb6b8fb..b3ba5163eae 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -28,7 +28,7 @@
#define DBG(fmt...)
#endif
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
void __init reserve_kdump_trampoline(void)
{
memblock_reserve(0, KDUMP_RESERVE_LIMIT);
@@ -67,7 +67,7 @@ void __init setup_kdump_trampoline(void)
DBG(" <- setup_kdump_trampoline()\n");
}
-#endif /* CONFIG_RELOCATABLE */
+#endif /* CONFIG_NONSTATIC_KERNEL */
static int __init parse_savemaxmem(char *p)
{
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index cf9c69b9189..d4be7bb3dbd 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -65,7 +65,7 @@ BEGIN_FTR_SECTION
lbz r0,PACAPROCSTART(r13)
cmpwi r0,0x80
bne 1f
- li r0,0
+ li r0,1
stb r0,PACAPROCSTART(r13)
b kvm_start_guest
1:
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b725dab0f88..7dd2981bcc5 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -64,6 +64,35 @@ _ENTRY(_start);
mr r31,r3 /* save device tree ptr */
li r24,0 /* CPU number */
+#ifdef CONFIG_RELOCATABLE
+/*
+ * Relocate ourselves to the current runtime address.
+ * This is called only by the Boot CPU.
+ * "relocate" is called with our current runtime virutal
+ * address.
+ * r21 will be loaded with the physical runtime address of _stext
+ */
+ bl 0f /* Get our runtime address */
+0: mflr r21 /* Make it accessible */
+ addis r21,r21,(_stext - 0b)@ha
+ addi r21,r21,(_stext - 0b)@l /* Get our current runtime base */
+
+ /*
+ * We have the runtime (virutal) address of our base.
+ * We calculate our shift of offset from a 256M page.
+ * We could map the 256M page we belong to at PAGE_OFFSET and
+ * get going from there.
+ */
+ lis r4,KERNELBASE@h
+ ori r4,r4,KERNELBASE@l
+ rlwinm r6,r21,0,4,31 /* r6 = PHYS_START % 256M */
+ rlwinm r5,r4,0,4,31 /* r5 = KERNELBASE % 256M */
+ subf r3,r5,r6 /* r3 = r6 - r5 */
+ add r3,r4,r3 /* Required Virutal Address */
+
+ bl relocate
+#endif
+
bl init_cpu_state
/*
@@ -88,6 +117,65 @@ _ENTRY(_start);
#ifdef CONFIG_RELOCATABLE
/*
+ * Relocatable kernel support based on processing of dynamic
+ * relocation entries.
+ *
+ * r25 will contain RPN/ERPN for the start address of memory
+ * r21 will contain the current offset of _stext
+ */
+ lis r3,kernstart_addr@ha
+ la r3,kernstart_addr@l(r3)
+
+ /*
+ * Compute the kernstart_addr.
+ * kernstart_addr => (r6,r8)
+ * kernstart_addr & ~0xfffffff => (r6,r7)
+ */
+ rlwinm r6,r25,0,28,31 /* ERPN. Bits 32-35 of Address */
+ rlwinm r7,r25,0,0,3 /* RPN - assuming 256 MB page size */
+ rlwinm r8,r21,0,4,31 /* r8 = (_stext & 0xfffffff) */
+ or r8,r7,r8 /* Compute the lower 32bit of kernstart_addr */
+
+ /* Store kernstart_addr */
+ stw r6,0(r3) /* higher 32bit */
+ stw r8,4(r3) /* lower 32bit */
+
+ /*
+ * Compute the virt_phys_offset :
+ * virt_phys_offset = stext.run - kernstart_addr
+ *
+ * stext.run = (KERNELBASE & ~0xfffffff) + (kernstart_addr & 0xfffffff)
+ * When we relocate, we have :
+ *
+ * (kernstart_addr & 0xfffffff) = (stext.run & 0xfffffff)
+ *
+ * hence:
+ * virt_phys_offset = (KERNELBASE & ~0xfffffff) - (kernstart_addr & ~0xfffffff)
+ *
+ */
+
+ /* KERNELBASE&~0xfffffff => (r4,r5) */
+ li r4, 0 /* higer 32bit */
+ lis r5,KERNELBASE@h
+ rlwinm r5,r5,0,0,3 /* Align to 256M, lower 32bit */
+
+ /*
+ * 64bit subtraction.
+ */
+ subfc r5,r7,r5
+ subfe r4,r6,r4
+
+ /* Store virt_phys_offset */
+ lis r3,virt_phys_offset@ha
+ la r3,virt_phys_offset@l(r3)
+
+ stw r4,0(r3)
+ stw r5,4(r3)
+
+#elif defined(CONFIG_DYNAMIC_MEMSTART)
+ /*
+ * Mapping based, page aligned dynamic kernel loading.
+ *
* r25 will contain RPN/ERPN for the start address of memory
*
* Add the difference between KERNELBASE and PAGE_OFFSET to the
@@ -732,6 +820,8 @@ _GLOBAL(init_cpu_state)
/* We use the PVR to differenciate 44x cores from 476 */
mfspr r3,SPRN_PVR
srwi r3,r3,16
+ cmplwi cr0,r3,PVR_476FPE@h
+ beq head_start_47x
cmplwi cr0,r3,PVR_476@h
beq head_start_47x
cmplwi cr0,r3,PVR_476_ISS@h
@@ -800,12 +890,29 @@ skpinv: addi r4,r4,1 /* Increment */
/*
* Configure and load pinned entry into TLB slot 63.
*/
+#ifdef CONFIG_NONSTATIC_KERNEL
+ /*
+ * In case of a NONSTATIC_KERNEL we reuse the TLB XLAT
+ * entries of the initial mapping set by the boot loader.
+ * The XLAT entry is stored in r25
+ */
+
+ /* Read the XLAT entry for our current mapping */
+ tlbre r25,r23,PPC44x_TLB_XLAT
+
+ lis r3,KERNELBASE@h
+ ori r3,r3,KERNELBASE@l
+
+ /* Use our current RPN entry */
+ mr r4,r25
+#else
lis r3,PAGE_OFFSET@h
ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
+#endif
/* Load the kernel PID = 0 */
li r0,0
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 9f5d210ddf3..d5d78c4ceef 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -197,7 +197,7 @@ _ENTRY(__early_start)
bl early_init
-#ifdef CONFIG_RELOCATABLE
+#ifdef CONFIG_DYNAMIC_MEMSTART
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
#ifdef CONFIG_PHYS_64BIT
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 9c3cd490b1b..7c66ce13da8 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -39,9 +39,13 @@
#define cpu_should_die() 0
#endif
+unsigned long cpuidle_disable = IDLE_NO_OVERRIDE;
+EXPORT_SYMBOL(cpuidle_disable);
+
static int __init powersave_off(char *arg)
{
ppc_md.power_save = NULL;
+ cpuidle_disable = IDLE_POWERSAVE_OFF;
return 0;
}
__setup("powersave=off", powersave_off);
@@ -113,6 +117,29 @@ void cpu_idle(void)
}
}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs come out of the old
+ * idle loop and start using the new idle loop.
+ * Required while changing idle handler on SMP systems.
+ * Caller must have changed idle handler to the new value before the call.
+ * This window may be larger on shared systems.
+ */
+void cpu_idle_wait(void)
+{
+ int cpu;
+ smp_mb();
+
+ /* kick all the CPUs so that they exit out of old idle routine */
+ get_online_cpus();
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id())
+ smp_send_reschedule(cpu);
+ }
+ put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
+
int powersave_nap;
#ifdef CONFIG_SYSCTL
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 3a70845a51c..fcdff198da4 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -54,6 +54,7 @@ _GLOBAL(power7_idle)
li r0,0
stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */
stb r0,PACAHARDIRQEN(r13)
+ stb r0,PACA_NAPSTATELOST(r13)
/* Continue saving state */
SAVE_GPR(2, r1)
@@ -86,6 +87,9 @@ _GLOBAL(power7_wakeup_loss)
rfid
_GLOBAL(power7_wakeup_noloss)
+ lbz r0,PACA_NAPSTATELOST(r13)
+ cmpwi r0,0
+ bne .power7_wakeup_loss
ld r1,PACAR1(r13)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5c3c46948d9..701d4aceb4f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -115,6 +115,15 @@ static inline notrace void set_soft_enabled(unsigned long enable)
: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
}
+static inline notrace void decrementer_check_overflow(void)
+{
+ u64 now = get_tb_or_rtc();
+ u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+
+ if (now >= *next_tb)
+ set_dec(1);
+}
+
notrace void arch_local_irq_restore(unsigned long en)
{
/*
@@ -164,24 +173,21 @@ notrace void arch_local_irq_restore(unsigned long en)
*/
local_paca->hard_enabled = en;
-#ifndef CONFIG_BOOKE
- /* On server, re-trigger the decrementer if it went negative since
- * some processors only trigger on edge transitions of the sign bit.
- *
- * BookE has a level sensitive decrementer (latches in TSR) so we
- * don't need that
+ /*
+ * Trigger the decrementer if we have a pending event. Some processors
+ * only trigger on edge transitions of the sign bit. We might also
+ * have disabled interrupts long enough that the decrementer wrapped
+ * to positive.
*/
- if ((int)mfspr(SPRN_DEC) < 0)
- mtspr(SPRN_DEC, 1);
-#endif /* CONFIG_BOOKE */
+ decrementer_check_overflow();
/*
* Force the delivery of pending soft-disabled interrupts on PS3.
* Any HV call will have this side effect.
*/
if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
- u64 tmp;
- lv1_get_version_info(&tmp);
+ u64 tmp, tmp2;
+ lv1_get_version_info(&tmp, &tmp2);
}
__hard_irq_enable();
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index a2158a395d9..c957b1202bd 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -125,7 +125,7 @@ void __init reserve_crashkernel(void)
crash_size = resource_size(&crashk_res);
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
if (crashk_res.start != KDUMP_KERNELBASE)
printk("Crash kernel location must be 0x%x\n",
KDUMP_KERNELBASE);
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 458ed3bee66..fa4a573d671 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -214,7 +214,7 @@ char __devinit *pcibios_setup(char *str)
* If the interrupt is used, then gets the interrupt line from the
* openfirmware and sets it in the pci_dev and pci_config line.
*/
-int pci_read_irq_line(struct pci_dev *pci_dev)
+static int pci_read_irq_line(struct pci_dev *pci_dev)
{
struct of_irq oirq;
unsigned int virq;
@@ -283,7 +283,6 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
return 0;
}
-EXPORT_SYMBOL(pci_read_irq_line);
/*
* Platform support for /proc/bus/pci/X/Y mmap()s,
@@ -921,18 +920,22 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
struct resource *res = dev->resource + i;
if (!res->flags)
continue;
- /* On platforms that have PCI_PROBE_ONLY set, we don't
- * consider 0 as an unassigned BAR value. It's technically
- * a valid value, but linux doesn't like it... so when we can
- * re-assign things, we do so, but if we can't, we keep it
- * around and hope for the best...
+
+ /* If we're going to re-assign everything, we mark all resources
+ * as unset (and 0-base them). In addition, we mark BARs starting
+ * at 0 as unset as well, except if PCI_PROBE_ONLY is also set
+ * since in that case, we don't want to re-assign anything
*/
- if (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY)) {
- pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
- pci_name(dev), i,
- (unsigned long long)res->start,
- (unsigned long long)res->end,
- (unsigned int)res->flags);
+ if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) ||
+ (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) {
+ /* Only print message if not re-assigning */
+ if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC))
+ pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] "
+ "is unassigned\n",
+ pci_name(dev), i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags);
res->end -= res->start;
res->start = 0;
res->flags |= IORESOURCE_UNSET;
@@ -1042,6 +1045,16 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
if (i >= 3 && bus->self->transparent)
continue;
+ /* If we are going to re-assign everything, mark the resource
+ * as unset and move it down to 0
+ */
+ if (pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
+ res->flags |= IORESOURCE_UNSET;
+ res->end -= res->start;
+ res->start = 0;
+ continue;
+ }
+
pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
pci_name(dev), i,
(unsigned long long)res->start,\
@@ -1262,18 +1275,15 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
pci_bus_for_each_resource(bus, res, i) {
if (!res || !res->flags || res->start > res->end || res->parent)
continue;
+
+ /* If the resource was left unset at this point, we clear it */
+ if (res->flags & IORESOURCE_UNSET)
+ goto clear_resource;
+
if (bus->parent == NULL)
pr = (res->flags & IORESOURCE_IO) ?
&ioport_resource : &iomem_resource;
else {
- /* Don't bother with non-root busses when
- * re-assigning all resources. We clear the
- * resource flags as if they were colliding
- * and as such ensure proper re-allocation
- * later.
- */
- if (pci_has_flag(PCI_REASSIGN_ALL_RSRC))
- goto clear_resource;
pr = pci_find_parent_resource(bus->self, res);
if (pr == res) {
/* this happens when the generic PCI
@@ -1304,9 +1314,9 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
if (reparent_resources(pr, res) == 0)
continue;
}
- printk(KERN_WARNING "PCI: Cannot allocate resource region "
- "%d of PCI bridge %d, will remap\n", i, bus->number);
-clear_resource:
+ pr_warning("PCI: Cannot allocate resource region "
+ "%d of PCI bridge %d, will remap\n", i, bus->number);
+ clear_resource:
res->start = res->end = 0;
res->flags = 0;
}
@@ -1451,16 +1461,11 @@ void __init pcibios_resource_survey(void)
{
struct pci_bus *b;
- /* Allocate and assign resources. If we re-assign everything, then
- * we skip the allocate phase
- */
+ /* Allocate and assign resources */
list_for_each_entry(b, &pci_root_buses, node)
pcibios_allocate_bus_resources(b);
-
- if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) {
- pcibios_allocate_resources(0);
- pcibios_allocate_resources(1);
- }
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
/* Before we start assigning unassigned resource, we try to reserve
* the low IO area and the VGA memory area if they intersect the
@@ -1732,6 +1737,12 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+ /* Platform gets a chance to do some global fixups before
+ * we proceed to resource allocation
+ */
+ if (ppc_md.pcibios_fixup_phb)
+ ppc_md.pcibios_fixup_phb(hose);
+
/* Configure PCI Express settings */
if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
struct pci_bus *child;
@@ -1747,10 +1758,13 @@ void __devinit pcibios_scan_phb(struct pci_controller *hose)
static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
{
int i, class = dev->class >> 8;
+ /* When configured as agent, programing interface = 1 */
+ int prog_if = dev->class & 0xf;
if ((class == PCI_CLASS_PROCESSOR_POWERPC ||
class == PCI_CLASS_BRIDGE_OTHER) &&
(dev->hdr_type == PCI_HEADER_TYPE_NORMAL) &&
+ (prog_if == 0) &&
(dev->bus->parent == NULL)) {
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 4e69deb89b3..dd9e4a04bf7 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -50,6 +50,9 @@ void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
dn->data = pdn;
pdn->node = dn;
pdn->phb = phb;
+#ifdef CONFIG_PPC_POWERNV
+ pdn->pe_number = IODA_INVALID_PE;
+#endif
regs = of_get_property(dn, "reg", NULL);
if (regs) {
/* First register entry is addr (00BBSS00) */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 6457574c0b2..ebe5766781a 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -584,16 +584,32 @@ static struct regbit {
unsigned long bit;
const char *name;
} msr_bits[] = {
+#if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE)
+ {MSR_SF, "SF"},
+ {MSR_HV, "HV"},
+#endif
+ {MSR_VEC, "VEC"},
+ {MSR_VSX, "VSX"},
+#ifdef CONFIG_BOOKE
+ {MSR_CE, "CE"},
+#endif
{MSR_EE, "EE"},
{MSR_PR, "PR"},
{MSR_FP, "FP"},
- {MSR_VEC, "VEC"},
- {MSR_VSX, "VSX"},
{MSR_ME, "ME"},
- {MSR_CE, "CE"},
+#ifdef CONFIG_BOOKE
{MSR_DE, "DE"},
+#else
+ {MSR_SE, "SE"},
+ {MSR_BE, "BE"},
+#endif
{MSR_IR, "IR"},
{MSR_DR, "DR"},
+ {MSR_PMM, "PMM"},
+#ifndef CONFIG_BOOKE
+ {MSR_RI, "RI"},
+ {MSR_LE, "LE"},
+#endif
{0, NULL}
};
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cc584865b3d..eca626ea3f2 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -742,7 +742,7 @@ static unsigned char ibm_architecture_vec[] = {
W(0xffffffff), /* virt_base */
W(0xffffffff), /* virt_size */
W(0xffffffff), /* load_base */
- W(64), /* 64MB min RMA */
+ W(256), /* 256MB min RMA */
W(0xffffffff), /* full client load */
0, /* min RMA percentage of total RAM */
48, /* max log_2(hash table size) */
@@ -1224,14 +1224,6 @@ static void __init prom_init_mem(void)
RELOC(alloc_bottom) = PAGE_ALIGN((unsigned long)&RELOC(_end) + 0x4000);
- /* Check if we have an initrd after the kernel, if we do move our bottom
- * point to after it
- */
- if (RELOC(prom_initrd_start)) {
- if (RELOC(prom_initrd_end) > RELOC(alloc_bottom))
- RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
- }
-
/*
* If prom_memory_limit is set we reduce the upper limits *except* for
* alloc_top_high. This must be the real top of RAM so we can put
@@ -1269,6 +1261,15 @@ static void __init prom_init_mem(void)
RELOC(alloc_top) = RELOC(rmo_top);
RELOC(alloc_top_high) = RELOC(ram_top);
+ /*
+ * Check if we have an initrd after the kernel but still inside
+ * the RMO. If we do move our bottom point to after it.
+ */
+ if (RELOC(prom_initrd_start) &&
+ RELOC(prom_initrd_start) < RELOC(rmo_top) &&
+ RELOC(prom_initrd_end) > RELOC(alloc_bottom))
+ RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
+
prom_printf("memory layout at init:\n");
prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
@@ -2079,7 +2080,7 @@ static void __init prom_check_displays(void)
/* Setup a usable color table when the appropriate
* method is available. Should update this to set-colors */
clut = RELOC(default_colors);
- for (i = 0; i < 32; i++, clut += 3)
+ for (i = 0; i < 16; i++, clut += 3)
if (prom_set_color(ih, i, clut[0], clut[1],
clut[2]) != 0)
break;
@@ -2844,7 +2845,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
RELOC(of_platform) = prom_find_machine_type();
prom_printf("Detected machine type: %x\n", RELOC(of_platform));
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
@@ -2969,9 +2970,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
/*
* in case stdin is USB and still active on IBM machines...
* Unfortunately quiesce crashes on some powermacs if we have
- * closed stdin already (in particular the powerbook 101).
+ * closed stdin already (in particular the powerbook 101). It
+ * appears that the OPAL version of OFW doesn't like it either.
*/
- if (RELOC(of_platform) != PLATFORM_POWERMAC)
+ if (RELOC(of_platform) != PLATFORM_POWERMAC &&
+ RELOC(of_platform) != PLATFORM_OPAL)
prom_close_stdin();
/*
@@ -2987,8 +2990,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
* is common to us and kexec
*/
hdr = RELOC(dt_header_start);
- prom_printf("returning from prom_init\n");
- prom_debug("->dt_header_start=0x%x\n", hdr);
+
+ /* Don't print anything after quiesce under OPAL, it crashes OFW */
+ if (RELOC(of_platform) != PLATFORM_OPAL) {
+ prom_printf("returning from prom_init\n");
+ prom_debug("->dt_header_start=0x%x\n", hdr);
+ }
#ifdef CONFIG_PPC32
reloc_got2(-offset);
diff --git a/arch/powerpc/kernel/reloc_32.S b/arch/powerpc/kernel/reloc_32.S
new file mode 100644
index 00000000000..ef46ba6e094
--- /dev/null
+++ b/arch/powerpc/kernel/reloc_32.S
@@ -0,0 +1,208 @@
+/*
+ * Code to process dynamic relocations for PPC32.
+ *
+ * Copyrights (C) IBM Corporation, 2011.
+ * Author: Suzuki Poulose <suzuki@in.ibm.com>
+ *
+ * - Based on ppc64 code - reloc_64.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ppc_asm.h>
+
+/* Dynamic section table entry tags */
+DT_RELA = 7 /* Tag for Elf32_Rela section */
+DT_RELASZ = 8 /* Size of the Rela relocs */
+DT_RELAENT = 9 /* Size of one Rela reloc entry */
+
+STN_UNDEF = 0 /* Undefined symbol index */
+STB_LOCAL = 0 /* Local binding for the symbol */
+
+R_PPC_ADDR16_LO = 4 /* Lower half of (S+A) */
+R_PPC_ADDR16_HI = 5 /* Upper half of (S+A) */
+R_PPC_ADDR16_HA = 6 /* High Adjusted (S+A) */
+R_PPC_RELATIVE = 22
+
+/*
+ * r3 = desired final address
+ */
+
+_GLOBAL(relocate)
+
+ mflr r0 /* Save our LR */
+ bl 0f /* Find our current runtime address */
+0: mflr r12 /* Make it accessible */
+ mtlr r0
+
+ lwz r11, (p_dyn - 0b)(r12)
+ add r11, r11, r12 /* runtime address of .dynamic section */
+ lwz r9, (p_rela - 0b)(r12)
+ add r9, r9, r12 /* runtime address of .rela.dyn section */
+ lwz r10, (p_st - 0b)(r12)
+ add r10, r10, r12 /* runtime address of _stext section */
+ lwz r13, (p_sym - 0b)(r12)
+ add r13, r13, r12 /* runtime address of .dynsym section */
+
+ /*
+ * Scan the dynamic section for RELA, RELASZ entries
+ */
+ li r6, 0
+ li r7, 0
+ li r8, 0
+1: lwz r5, 0(r11) /* ELF_Dyn.d_tag */
+ cmpwi r5, 0 /* End of ELF_Dyn[] */
+ beq eodyn
+ cmpwi r5, DT_RELA
+ bne relasz
+ lwz r7, 4(r11) /* r7 = rela.link */
+ b skip
+relasz:
+ cmpwi r5, DT_RELASZ
+ bne relaent
+ lwz r8, 4(r11) /* r8 = Total Rela relocs size */
+ b skip
+relaent:
+ cmpwi r5, DT_RELAENT
+ bne skip
+ lwz r6, 4(r11) /* r6 = Size of one Rela reloc */
+skip:
+ addi r11, r11, 8
+ b 1b
+eodyn: /* End of Dyn Table scan */
+
+ /* Check if we have found all the entries */
+ cmpwi r7, 0
+ beq done
+ cmpwi r8, 0
+ beq done
+ cmpwi r6, 0
+ beq done
+
+
+ /*
+ * Work out the current offset from the link time address of .rela
+ * section.
+ * cur_offset[r7] = rela.run[r9] - rela.link [r7]
+ * _stext.link[r12] = _stext.run[r10] - cur_offset[r7]
+ * final_offset[r3] = _stext.final[r3] - _stext.link[r12]
+ */
+ subf r7, r7, r9 /* cur_offset */
+ subf r12, r7, r10
+ subf r3, r12, r3 /* final_offset */
+
+ subf r8, r6, r8 /* relaz -= relaent */
+ /*
+ * Scan through the .rela table and process each entry
+ * r9 - points to the current .rela table entry
+ * r13 - points to the symbol table
+ */
+
+ /*
+ * Check if we have a relocation based on symbol
+ * r5 will hold the value of the symbol.
+ */
+applyrela:
+ lwz r4, 4(r9) /* r4 = rela.r_info */
+ srwi r5, r4, 8 /* ELF32_R_SYM(r_info) */
+ cmpwi r5, STN_UNDEF /* sym == STN_UNDEF ? */
+ beq get_type /* value = 0 */
+ /* Find the value of the symbol at index(r5) */
+ slwi r5, r5, 4 /* r5 = r5 * sizeof(Elf32_Sym) */
+ add r12, r13, r5 /* r12 = &__dyn_sym[Index] */
+
+ /*
+ * GNU ld has a bug, where dynamic relocs based on
+ * STB_LOCAL symbols, the value should be assumed
+ * to be zero. - Alan Modra
+ */
+ /* XXX: Do we need to check if we are using GNU ld ? */
+ lbz r5, 12(r12) /* r5 = dyn_sym[Index].st_info */
+ extrwi r5, r5, 4, 24 /* r5 = ELF32_ST_BIND(r5) */
+ cmpwi r5, STB_LOCAL /* st_value = 0, ld bug */
+ beq get_type /* We have r5 = 0 */
+ lwz r5, 4(r12) /* r5 = __dyn_sym[Index].st_value */
+
+get_type:
+ /* Load the relocation type to r4 */
+ extrwi r4, r4, 8, 24 /* r4 = ELF32_R_TYPE(r_info) = ((char*)r4)[3] */
+
+ /* R_PPC_RELATIVE */
+ cmpwi r4, R_PPC_RELATIVE
+ bne hi16
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3 /* final addend */
+ stwx r0, r4, r7 /* memory[r4+r7]) = (u32)r0 */
+ b nxtrela /* continue */
+
+ /* R_PPC_ADDR16_HI */
+hi16:
+ cmpwi r4, R_PPC_ADDR16_HI
+ bne ha16
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3
+ add r0, r0, r5 /* r0 = (S+A+Offset) */
+ extrwi r0, r0, 16, 0 /* r0 = (r0 >> 16) */
+ b store_half
+
+ /* R_PPC_ADDR16_HA */
+ha16:
+ cmpwi r4, R_PPC_ADDR16_HA
+ bne lo16
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3
+ add r0, r0, r5 /* r0 = (S+A+Offset) */
+ extrwi r5, r0, 1, 16 /* Extract bit 16 */
+ extrwi r0, r0, 16, 0 /* r0 = (r0 >> 16) */
+ add r0, r0, r5 /* Add it to r0 */
+ b store_half
+
+ /* R_PPC_ADDR16_LO */
+lo16:
+ cmpwi r4, R_PPC_ADDR16_LO
+ bne nxtrela
+ lwz r4, 0(r9) /* r_offset */
+ lwz r0, 8(r9) /* r_addend */
+ add r0, r0, r3
+ add r0, r0, r5 /* r0 = (S+A+Offset) */
+ extrwi r0, r0, 16, 16 /* r0 &= 0xffff */
+ /* Fall through to */
+
+ /* Store half word */
+store_half:
+ sthx r0, r4, r7 /* memory[r4+r7] = (u16)r0 */
+
+nxtrela:
+ /*
+ * We have to flush the modified instructions to the
+ * main storage from the d-cache. And also, invalidate the
+ * cached instructions in i-cache which has been modified.
+ *
+ * We delay the sync / isync operation till the end, since
+ * we won't be executing the modified instructions until
+ * we return from here.
+ */
+ dcbst r4,r7
+ sync /* Ensure the data is flushed before icbi */
+ icbi r4,r7
+ cmpwi r8, 0 /* relasz = 0 ? */
+ ble done
+ add r9, r9, r6 /* move to next entry in the .rela table */
+ subf r8, r6, r8 /* relasz -= relaent */
+ b applyrela
+
+done:
+ sync /* Wait for the flush to finish */
+ isync /* Discard prefetched instructions */
+ blr
+
+p_dyn: .long __dynamic_start - 0b
+p_rela: .long __rela_dyn_start - 0b
+p_sym: .long __dynamic_symtab - 0b
+p_st: .long _stext - 0b
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index e037c7494fd..4174b4b2324 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -568,6 +568,12 @@ static void rtas_flash_firmware(int reboot_type)
}
/*
+ * Just before starting the firmware flash, cancel the event scan work
+ * to avoid any soft lockup issues.
+ */
+ rtas_cancel_event_scan();
+
+ /*
* NOTE: the "first" block must be under 4GB, so we create
* an entry with no data blocks in the reserved buffer in
* the kernel data segment.
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 481ef064c8f..1045ff49cc6 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -472,6 +472,13 @@ static void start_event_scan(void)
&event_scan_work, event_scan_delay);
}
+/* Cancel the rtas event scan work */
+void rtas_cancel_event_scan(void)
+{
+ cancel_delayed_work_sync(&event_scan_work);
+}
+EXPORT_SYMBOL_GPL(rtas_cancel_event_scan);
+
static int __init rtas_init(void)
{
struct proc_dir_entry *entry;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fb9bb46e7e8..4cb8f1e9d04 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -35,6 +35,8 @@
#include <linux/pci.h>
#include <linux/lockdep.h>
#include <linux/memblock.h>
+#include <linux/hugetlb.h>
+
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
@@ -64,6 +66,7 @@
#include <asm/mmu_context.h>
#include <asm/code-patching.h>
#include <asm/kvm_ppc.h>
+#include <asm/hugetlb.h>
#include "setup.h"
@@ -217,6 +220,13 @@ void __init early_setup(unsigned long dt_ptr)
/* Initialize the hash table or TLB handling */
early_init_mmu();
+ /*
+ * Reserve any gigantic pages requested on the command line.
+ * memblock needs to have been initialized by the time this is
+ * called since this will reserve memory.
+ */
+ reserve_hugetlb_gpages();
+
DBG(" <- early_setup()\n");
}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 6df70907d60..f0abe92f63f 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -187,7 +187,8 @@ int smp_request_message_ipi(int virq, int msg)
return 1;
}
#endif
- err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU,
+ err = request_irq(virq, smp_ipi_action[msg],
+ IRQF_PERCPU | IRQF_NO_THREAD,
smp_ipi_name[msg], 0);
WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
virq, smp_ipi_name[msg], err);
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index ce035c1905f..6fdf5ffe8c4 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -18,6 +18,7 @@
#include <asm/machdep.h>
#include <asm/smp.h>
#include <asm/pmc.h>
+#include <asm/system.h>
#include "cacheinfo.h"
@@ -51,6 +52,7 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev,
return -EINVAL;
per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze;
+ update_smt_snooze_delay(snooze);
return count;
}
@@ -177,11 +179,13 @@ SYSFS_PMCSETUP(mmcra, SPRN_MMCRA);
SYSFS_PMCSETUP(purr, SPRN_PURR);
SYSFS_PMCSETUP(spurr, SPRN_SPURR);
SYSFS_PMCSETUP(dscr, SPRN_DSCR);
+SYSFS_PMCSETUP(pir, SPRN_PIR);
static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
static SYSDEV_ATTR(purr, 0600, show_purr, store_purr);
+static SYSDEV_ATTR(pir, 0400, show_pir, NULL);
unsigned long dscr_default = 0;
EXPORT_SYMBOL(dscr_default);
@@ -392,6 +396,9 @@ static void __cpuinit register_cpu_online(unsigned int cpu)
if (cpu_has_feature(CPU_FTR_DSCR))
sysdev_create_file(s, &attr_dscr);
+
+ if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2))
+ sysdev_create_file(s, &attr_pir);
#endif /* CONFIG_PPC64 */
cacheinfo_cpu_online(cpu);
@@ -462,6 +469,9 @@ static void unregister_cpu_online(unsigned int cpu)
if (cpu_has_feature(CPU_FTR_DSCR))
sysdev_remove_file(s, &attr_dscr);
+
+ if (cpu_has_feature(CPU_FTR_PPCAS_ARCH_V2))
+ sysdev_remove_file(s, &attr_pir);
#endif /* CONFIG_PPC64 */
cacheinfo_cpu_offline(cpu);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 522bb1dfc35..567dd7c3ac2 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -86,8 +86,6 @@ static struct clocksource clocksource_rtc = {
.rating = 400,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
- .shift = 22,
- .mult = 0, /* To be filled in */
.read = rtc_read,
};
@@ -97,8 +95,6 @@ static struct clocksource clocksource_timebase = {
.rating = 400,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.mask = CLOCKSOURCE_MASK(64),
- .shift = 22,
- .mult = 0, /* To be filled in */
.read = timebase_read,
};
@@ -110,22 +106,16 @@ static void decrementer_set_mode(enum clock_event_mode mode,
struct clock_event_device *dev);
static struct clock_event_device decrementer_clockevent = {
- .name = "decrementer",
- .rating = 200,
- .shift = 0, /* To be filled in */
- .mult = 0, /* To be filled in */
- .irq = 0,
- .set_next_event = decrementer_set_next_event,
- .set_mode = decrementer_set_mode,
- .features = CLOCK_EVT_FEAT_ONESHOT,
+ .name = "decrementer",
+ .rating = 200,
+ .irq = 0,
+ .set_next_event = decrementer_set_next_event,
+ .set_mode = decrementer_set_mode,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
};
-struct decrementer_clock {
- struct clock_event_device event;
- u64 next_tb;
-};
-
-static DEFINE_PER_CPU(struct decrementer_clock, decrementers);
+DEFINE_PER_CPU(u64, decrementers_next_tb);
+static DEFINE_PER_CPU(struct clock_event_device, decrementers);
#ifdef CONFIG_PPC_ISERIES
static unsigned long __initdata iSeries_recal_titan;
@@ -168,13 +158,13 @@ EXPORT_SYMBOL_GPL(ppc_tb_freq);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
/*
* Factors for converting from cputime_t (timebase ticks) to
- * jiffies, milliseconds, seconds, and clock_t (1/USER_HZ seconds).
+ * jiffies, microseconds, seconds, and clock_t (1/USER_HZ seconds).
* These are all stored as 0.64 fixed-point binary fractions.
*/
u64 __cputime_jiffies_factor;
EXPORT_SYMBOL(__cputime_jiffies_factor);
-u64 __cputime_msec_factor;
-EXPORT_SYMBOL(__cputime_msec_factor);
+u64 __cputime_usec_factor;
+EXPORT_SYMBOL(__cputime_usec_factor);
u64 __cputime_sec_factor;
EXPORT_SYMBOL(__cputime_sec_factor);
u64 __cputime_clockt_factor;
@@ -192,8 +182,8 @@ static void calc_cputime_factors(void)
div128_by_32(HZ, 0, tb_ticks_per_sec, &res);
__cputime_jiffies_factor = res.result_low;
- div128_by_32(1000, 0, tb_ticks_per_sec, &res);
- __cputime_msec_factor = res.result_low;
+ div128_by_32(1000000, 0, tb_ticks_per_sec, &res);
+ __cputime_usec_factor = res.result_low;
div128_by_32(1, 0, tb_ticks_per_sec, &res);
__cputime_sec_factor = res.result_low;
div128_by_32(USER_HZ, 0, tb_ticks_per_sec, &res);
@@ -441,7 +431,7 @@ EXPORT_SYMBOL(profile_pc);
/*
* This function recalibrates the timebase based on the 49-bit time-of-day
* value in the Titan chip. The Titan is much more accurate than the value
- * returned by the service processor for the timebase frequency.
+ * returned by the service processor for the timebase frequency.
*/
static int __init iSeries_tb_recal(void)
@@ -576,9 +566,8 @@ void arch_irq_work_raise(void)
void timer_interrupt(struct pt_regs * regs)
{
struct pt_regs *old_regs;
- struct decrementer_clock *decrementer = &__get_cpu_var(decrementers);
- struct clock_event_device *evt = &decrementer->event;
- u64 now;
+ u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+ struct clock_event_device *evt = &__get_cpu_var(decrementers);
/* Ensure a positive value is written to the decrementer, or else
* some CPUs will continue to take decrementer exceptions.
@@ -613,16 +602,9 @@ void timer_interrupt(struct pt_regs * regs)
get_lppaca()->int_dword.fields.decr_int = 0;
#endif
- now = get_tb_or_rtc();
- if (now >= decrementer->next_tb) {
- decrementer->next_tb = ~(u64)0;
- if (evt->event_handler)
- evt->event_handler(evt);
- } else {
- now = decrementer->next_tb - now;
- if (now <= DECREMENTER_MAX)
- set_dec((int)now);
- }
+ *next_tb = ~(u64)0;
+ if (evt->event_handler)
+ evt->event_handler(evt);
#ifdef CONFIG_PPC_ISERIES
if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())
@@ -650,9 +632,9 @@ static void generic_suspend_disable_irqs(void)
* with suspending.
*/
- set_dec(0x7fffffff);
+ set_dec(DECREMENTER_MAX);
local_irq_disable();
- set_dec(0x7fffffff);
+ set_dec(DECREMENTER_MAX);
}
static void generic_suspend_enable_irqs(void)
@@ -824,9 +806,8 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
++vdso_data->tb_update_count;
smp_mb();
- /* XXX this assumes clock->shift == 22 */
- /* 4611686018 ~= 2^(20+64-22) / 1e9 */
- new_tb_to_xs = (u64) mult * 4611686018ULL;
+ /* 19342813113834067 ~= 2^(20+64) / 1e9 */
+ new_tb_to_xs = (u64) mult * (19342813113834067ULL >> clock->shift);
new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC;
do_div(new_stamp_xsec, 1000000000);
new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC;
@@ -877,9 +858,7 @@ static void __init clocksource_init(void)
else
clock = &clocksource_timebase;
- clock->mult = clocksource_hz2mult(tb_ticks_per_sec, clock->shift);
-
- if (clocksource_register(clock)) {
+ if (clocksource_register_hz(clock, tb_ticks_per_sec)) {
printk(KERN_ERR "clocksource: %s is already registered\n",
clock->name);
return;
@@ -892,7 +871,7 @@ static void __init clocksource_init(void)
static int decrementer_set_next_event(unsigned long evt,
struct clock_event_device *dev)
{
- __get_cpu_var(decrementers).next_tb = get_tb_or_rtc() + evt;
+ __get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt;
set_dec(evt);
return 0;
}
@@ -904,34 +883,9 @@ static void decrementer_set_mode(enum clock_event_mode mode,
decrementer_set_next_event(DECREMENTER_MAX, dev);
}
-static inline uint64_t div_sc64(unsigned long ticks, unsigned long nsec,
- int shift)
-{
- uint64_t tmp = ((uint64_t)ticks) << shift;
-
- do_div(tmp, nsec);
- return tmp;
-}
-
-static void __init setup_clockevent_multiplier(unsigned long hz)
-{
- u64 mult, shift = 32;
-
- while (1) {
- mult = div_sc64(hz, NSEC_PER_SEC, shift);
- if (mult && (mult >> 32UL) == 0UL)
- break;
-
- shift--;
- }
-
- decrementer_clockevent.shift = shift;
- decrementer_clockevent.mult = mult;
-}
-
static void register_decrementer_clockevent(int cpu)
{
- struct clock_event_device *dec = &per_cpu(decrementers, cpu).event;
+ struct clock_event_device *dec = &per_cpu(decrementers, cpu);
*dec = decrementer_clockevent;
dec->cpumask = cpumask_of(cpu);
@@ -946,7 +900,8 @@ static void __init init_decrementer_clockevent(void)
{
int cpu = smp_processor_id();
- setup_clockevent_multiplier(ppc_tb_freq);
+ clockevents_calc_mult_shift(&decrementer_clockevent, ppc_tb_freq, 4);
+
decrementer_clockevent.max_delta_ns =
clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
decrementer_clockevent.min_delta_ns =
@@ -1014,10 +969,10 @@ void __init time_init(void)
boot_tb = get_tb_or_rtc();
/* If platform provided a timezone (pmac), we correct the time */
- if (timezone_offset) {
+ if (timezone_offset) {
sys_tz.tz_minuteswest = -timezone_offset / 60;
sys_tz.tz_dsttime = 0;
- }
+ }
vdso_data->tb_update_count = 0;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 5459d148a0f..c091527efd8 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -98,18 +98,14 @@ static void pmac_backlight_unblank(void)
static inline void pmac_backlight_unblank(void) { }
#endif
-int die(const char *str, struct pt_regs *regs, long err)
+static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+static int die_counter;
+
+static unsigned __kprobes long oops_begin(struct pt_regs *regs)
{
- static struct {
- raw_spinlock_t lock;
- u32 lock_owner;
- int lock_owner_depth;
- } die = {
- .lock = __RAW_SPIN_LOCK_UNLOCKED(die.lock),
- .lock_owner = -1,
- .lock_owner_depth = 0
- };
- static int die_counter;
+ int cpu;
unsigned long flags;
if (debugger(regs))
@@ -117,66 +113,109 @@ int die(const char *str, struct pt_regs *regs, long err)
oops_enter();
- if (die.lock_owner != raw_smp_processor_id()) {
- console_verbose();
- raw_spin_lock_irqsave(&die.lock, flags);
- die.lock_owner = smp_processor_id();
- die.lock_owner_depth = 0;
- bust_spinlocks(1);
- if (machine_is(powermac))
- pmac_backlight_unblank();
- } else {
- local_save_flags(flags);
+ /* racy, but better than risking deadlock. */
+ raw_local_irq_save(flags);
+ cpu = smp_processor_id();
+ if (!arch_spin_trylock(&die_lock)) {
+ if (cpu == die_owner)
+ /* nested oops. should stop eventually */;
+ else
+ arch_spin_lock(&die_lock);
}
+ die_nest_count++;
+ die_owner = cpu;
+ console_verbose();
+ bust_spinlocks(1);
+ if (machine_is(powermac))
+ pmac_backlight_unblank();
+ return flags;
+}
- if (++die.lock_owner_depth < 3) {
- printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
- printk("PREEMPT ");
-#endif
-#ifdef CONFIG_SMP
- printk("SMP NR_CPUS=%d ", NR_CPUS);
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
- printk("DEBUG_PAGEALLOC ");
-#endif
-#ifdef CONFIG_NUMA
- printk("NUMA ");
-#endif
- printk("%s\n", ppc_md.name ? ppc_md.name : "");
+static void __kprobes oops_end(unsigned long flags, struct pt_regs *regs,
+ int signr)
+{
+ bust_spinlocks(0);
+ die_owner = -1;
+ add_taint(TAINT_DIE);
+ die_nest_count--;
+ oops_exit();
+ printk("\n");
+ if (!die_nest_count)
+ /* Nest count reaches zero, release the lock. */
+ arch_spin_unlock(&die_lock);
+ raw_local_irq_restore(flags);
- if (notify_die(DIE_OOPS, str, regs, err, 255,
- SIGSEGV) == NOTIFY_STOP)
- return 1;
+ /*
+ * A system reset (0x100) is a request to dump, so we always send
+ * it through the crashdump code.
+ */
+ if (kexec_should_crash(current) || (TRAP(regs) == 0x100)) {
+ crash_kexec(regs);
- print_modules();
- show_regs(regs);
- } else {
- printk("Recursive die() failure, output suppressed\n");
+ /*
+ * We aren't the primary crash CPU. We need to send it
+ * to a holding pattern to avoid it ending up in the panic
+ * code.
+ */
+ crash_kexec_secondary(regs);
}
- bust_spinlocks(0);
- die.lock_owner = -1;
- add_taint(TAINT_DIE);
- raw_spin_unlock_irqrestore(&die.lock, flags);
+ if (!signr)
+ return;
- if (kexec_should_crash(current) ||
- kexec_sr_activated(smp_processor_id()))
- crash_kexec(regs);
- crash_kexec_secondary(regs);
+ /*
+ * While our oops output is serialised by a spinlock, output
+ * from panic() called below can race and corrupt it. If we
+ * know we are going to panic, delay for 1 second so we have a
+ * chance to get clean backtraces from all CPUs that are oopsing.
+ */
+ if (in_interrupt() || panic_on_oops || !current->pid ||
+ is_global_init(current)) {
+ mdelay(MSEC_PER_SEC);
+ }
if (in_interrupt())
panic("Fatal exception in interrupt");
-
if (panic_on_oops)
panic("Fatal exception");
+ do_exit(signr);
+}
- oops_exit();
- do_exit(err);
+static int __kprobes __die(const char *str, struct pt_regs *regs, long err)
+{
+ printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+ printk("PREEMPT ");
+#endif
+#ifdef CONFIG_SMP
+ printk("SMP NR_CPUS=%d ", NR_CPUS);
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+ printk("DEBUG_PAGEALLOC ");
+#endif
+#ifdef CONFIG_NUMA
+ printk("NUMA ");
+#endif
+ printk("%s\n", ppc_md.name ? ppc_md.name : "");
+
+ if (notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV) == NOTIFY_STOP)
+ return 1;
+
+ print_modules();
+ show_regs(regs);
return 0;
}
+void die(const char *str, struct pt_regs *regs, long err)
+{
+ unsigned long flags = oops_begin(regs);
+
+ if (__die(str, regs, err))
+ err = 0;
+ oops_end(flags, regs, err);
+}
+
void user_single_step_siginfo(struct task_struct *tsk,
struct pt_regs *regs, siginfo_t *info)
{
@@ -195,10 +234,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
"at %016lx nip %016lx lr %016lx code %x\n";
if (!user_mode(regs)) {
- if (die("Exception in kernel mode", regs, signr))
- return;
- } else if (show_unhandled_signals &&
- unhandled_signal(current, signr)) {
+ die("Exception in kernel mode", regs, signr);
+ return;
+ }
+
+ if (show_unhandled_signals && unhandled_signal(current, signr)) {
printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
current->comm, current->pid, signr,
addr, regs->nip, regs->link, code);
@@ -220,25 +260,8 @@ void system_reset_exception(struct pt_regs *regs)
return;
}
-#ifdef CONFIG_KEXEC
- cpumask_set_cpu(smp_processor_id(), &cpus_in_sr);
-#endif
-
die("System Reset", regs, SIGABRT);
- /*
- * Some CPUs when released from the debugger will execute this path.
- * These CPUs entered the debugger via a soft-reset. If the CPU was
- * hung before entering the debugger it will return to the hung
- * state when exiting this function. This causes a problem in
- * kdump since the hung CPU(s) will not respond to the IPI sent
- * from kdump. To prevent the problem we call crash_kexec_secondary()
- * here. If a kdump had not been initiated or we exit the debugger
- * with the "exit and recover" command (x) crash_kexec_secondary()
- * will return after 5ms and the CPU returns to its previous state.
- */
- crash_kexec_secondary(regs);
-
/* Must die if the interrupt is not recoverable */
if (!(regs->msr & MSR_RI))
panic("Unrecoverable System Reset");
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 920276c0f6a..710a54005df 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -170,7 +170,13 @@ SECTIONS
}
#ifdef CONFIG_RELOCATABLE
. = ALIGN(8);
- .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET) { *(.dynsym) }
+ .dynsym : AT(ADDR(.dynsym) - LOAD_OFFSET)
+ {
+#ifdef CONFIG_RELOCATABLE_PPC32
+ __dynamic_symtab = .;
+#endif
+ *(.dynsym)
+ }
.dynstr : AT(ADDR(.dynstr) - LOAD_OFFSET) { *(.dynstr) }
.dynamic : AT(ADDR(.dynamic) - LOAD_OFFSET)
{
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 44d8829334a..5c8b26183f5 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -112,6 +112,9 @@ kvm_start_guest:
stbcix r0, r5, r6 /* clear it */
stwcix r8, r5, r7 /* EOI it */
+ /* NV GPR values from power7_idle() will no longer be valid */
+ stb r0, PACA_NAPSTATELOST(r13)
+
.global kvmppc_hv_entry
kvmppc_hv_entry:
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 166a6a0ad54..7735a2c2e6d 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -16,13 +16,15 @@ obj-$(CONFIG_HAS_IOMEM) += devres.o
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
memcpy_64.o usercopy_64.o mem_64.o string.o \
- checksum_wrappers_64.o hweight_64.o
+ checksum_wrappers_64.o hweight_64.o \
+ copyuser_power7.o
obj-$(CONFIG_XMON) += sstep.o ldstfp.o
obj-$(CONFIG_KPROBES) += sstep.o ldstfp.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += sstep.o ldstfp.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
+obj-$(CONFIG_ALTIVEC) += copyuser_power7_vmx.o
endif
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 578b625d6a3..773d38f90aa 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -11,6 +11,12 @@
.align 7
_GLOBAL(__copy_tofrom_user)
+BEGIN_FTR_SECTION
+ nop
+FTR_SECTION_ELSE
+ b __copy_tofrom_user_power7
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_VMX_COPY)
+_GLOBAL(__copy_tofrom_user_base)
/* first check for a whole page copy on a page boundary */
cmpldi cr1,r5,16
cmpdi cr6,r5,4096
diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
new file mode 100644
index 00000000000..497db7b23bb
--- /dev/null
+++ b/arch/powerpc/lib/copyuser_power7.S
@@ -0,0 +1,683 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2011
+ *
+ * Author: Anton Blanchard <anton@au.ibm.com>
+ */
+#include <asm/ppc_asm.h>
+
+#define STACKFRAMESIZE 256
+#define STK_REG(i) (112 + ((i)-14)*8)
+
+ .macro err1
+100:
+ .section __ex_table,"a"
+ .align 3
+ .llong 100b,.Ldo_err1
+ .previous
+ .endm
+
+ .macro err2
+200:
+ .section __ex_table,"a"
+ .align 3
+ .llong 200b,.Ldo_err2
+ .previous
+ .endm
+
+#ifdef CONFIG_ALTIVEC
+ .macro err3
+300:
+ .section __ex_table,"a"
+ .align 3
+ .llong 300b,.Ldo_err3
+ .previous
+ .endm
+
+ .macro err4
+400:
+ .section __ex_table,"a"
+ .align 3
+ .llong 400b,.Ldo_err4
+ .previous
+ .endm
+
+
+.Ldo_err4:
+ ld r16,STK_REG(r16)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r14,STK_REG(r14)(r1)
+.Ldo_err3:
+ bl .exit_vmx_copy
+ ld r0,STACKFRAMESIZE+16(r1)
+ mtlr r0
+ b .Lexit
+#endif /* CONFIG_ALTIVEC */
+
+.Ldo_err2:
+ ld r22,STK_REG(r22)(r1)
+ ld r21,STK_REG(r21)(r1)
+ ld r20,STK_REG(r20)(r1)
+ ld r19,STK_REG(r19)(r1)
+ ld r18,STK_REG(r18)(r1)
+ ld r17,STK_REG(r17)(r1)
+ ld r16,STK_REG(r16)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r14,STK_REG(r14)(r1)
+.Lexit:
+ addi r1,r1,STACKFRAMESIZE
+.Ldo_err1:
+ ld r3,48(r1)
+ ld r4,56(r1)
+ ld r5,64(r1)
+ b __copy_tofrom_user_base
+
+
+_GLOBAL(__copy_tofrom_user_power7)
+#ifdef CONFIG_ALTIVEC
+ cmpldi r5,16
+ cmpldi cr1,r5,4096
+
+ std r3,48(r1)
+ std r4,56(r1)
+ std r5,64(r1)
+
+ blt .Lshort_copy
+ bgt cr1,.Lvmx_copy
+#else
+ cmpldi r5,16
+
+ std r3,48(r1)
+ std r4,56(r1)
+ std r5,64(r1)
+
+ blt .Lshort_copy
+#endif
+
+.Lnonvmx_copy:
+ /* Get the source 8B aligned */
+ neg r6,r4
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-3)
+
+ bf cr7*4+3,1f
+err1; lbz r0,0(r4)
+ addi r4,r4,1
+err1; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err1; lhz r0,0(r4)
+ addi r4,r4,2
+err1; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err1; lwz r0,0(r4)
+ addi r4,r4,4
+err1; stw r0,0(r3)
+ addi r3,r3,4
+
+3: sub r5,r5,r6
+ cmpldi r5,128
+ blt 5f
+
+ mflr r0
+ stdu r1,-STACKFRAMESIZE(r1)
+ std r14,STK_REG(r14)(r1)
+ std r15,STK_REG(r15)(r1)
+ std r16,STK_REG(r16)(r1)
+ std r17,STK_REG(r17)(r1)
+ std r18,STK_REG(r18)(r1)
+ std r19,STK_REG(r19)(r1)
+ std r20,STK_REG(r20)(r1)
+ std r21,STK_REG(r21)(r1)
+ std r22,STK_REG(r22)(r1)
+ std r0,STACKFRAMESIZE+16(r1)
+
+ srdi r6,r5,7
+ mtctr r6
+
+ /* Now do cacheline (128B) sized loads and stores. */
+ .align 5
+4:
+err2; ld r0,0(r4)
+err2; ld r6,8(r4)
+err2; ld r7,16(r4)
+err2; ld r8,24(r4)
+err2; ld r9,32(r4)
+err2; ld r10,40(r4)
+err2; ld r11,48(r4)
+err2; ld r12,56(r4)
+err2; ld r14,64(r4)
+err2; ld r15,72(r4)
+err2; ld r16,80(r4)
+err2; ld r17,88(r4)
+err2; ld r18,96(r4)
+err2; ld r19,104(r4)
+err2; ld r20,112(r4)
+err2; ld r21,120(r4)
+ addi r4,r4,128
+err2; std r0,0(r3)
+err2; std r6,8(r3)
+err2; std r7,16(r3)
+err2; std r8,24(r3)
+err2; std r9,32(r3)
+err2; std r10,40(r3)
+err2; std r11,48(r3)
+err2; std r12,56(r3)
+err2; std r14,64(r3)
+err2; std r15,72(r3)
+err2; std r16,80(r3)
+err2; std r17,88(r3)
+err2; std r18,96(r3)
+err2; std r19,104(r3)
+err2; std r20,112(r3)
+err2; std r21,120(r3)
+ addi r3,r3,128
+ bdnz 4b
+
+ clrldi r5,r5,(64-7)
+
+ ld r14,STK_REG(r14)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r16,STK_REG(r16)(r1)
+ ld r17,STK_REG(r17)(r1)
+ ld r18,STK_REG(r18)(r1)
+ ld r19,STK_REG(r19)(r1)
+ ld r20,STK_REG(r20)(r1)
+ ld r21,STK_REG(r21)(r1)
+ ld r22,STK_REG(r22)(r1)
+ addi r1,r1,STACKFRAMESIZE
+
+ /* Up to 127B to go */
+5: srdi r6,r5,4
+ mtocrf 0x01,r6
+
+6: bf cr7*4+1,7f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+err1; ld r7,16(r4)
+err1; ld r8,24(r4)
+err1; ld r9,32(r4)
+err1; ld r10,40(r4)
+err1; ld r11,48(r4)
+err1; ld r12,56(r4)
+ addi r4,r4,64
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+err1; std r7,16(r3)
+err1; std r8,24(r3)
+err1; std r9,32(r3)
+err1; std r10,40(r3)
+err1; std r11,48(r3)
+err1; std r12,56(r3)
+ addi r3,r3,64
+
+ /* Up to 63B to go */
+7: bf cr7*4+2,8f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+err1; ld r7,16(r4)
+err1; ld r8,24(r4)
+ addi r4,r4,32
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+err1; std r7,16(r3)
+err1; std r8,24(r3)
+ addi r3,r3,32
+
+ /* Up to 31B to go */
+8: bf cr7*4+3,9f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+ addi r4,r4,16
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+ addi r3,r3,16
+
+9: clrldi r5,r5,(64-4)
+
+ /* Up to 15B to go */
+.Lshort_copy:
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err1; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err1; lwz r6,4(r4)
+ addi r4,r4,8
+err1; stw r0,0(r3)
+err1; stw r6,4(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+err1; lwz r0,0(r4)
+ addi r4,r4,4
+err1; stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+err1; lhz r0,0(r4)
+ addi r4,r4,2
+err1; sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+err1; lbz r0,0(r4)
+err1; stb r0,0(r3)
+
+15: li r3,0
+ blr
+
+.Lunwind_stack_nonvmx_copy:
+ addi r1,r1,STACKFRAMESIZE
+ b .Lnonvmx_copy
+
+#ifdef CONFIG_ALTIVEC
+.Lvmx_copy:
+ mflr r0
+ std r0,16(r1)
+ stdu r1,-STACKFRAMESIZE(r1)
+ bl .enter_vmx_copy
+ cmpwi r3,0
+ ld r0,STACKFRAMESIZE+16(r1)
+ ld r3,STACKFRAMESIZE+48(r1)
+ ld r4,STACKFRAMESIZE+56(r1)
+ ld r5,STACKFRAMESIZE+64(r1)
+ mtlr r0
+
+ beq .Lunwind_stack_nonvmx_copy
+
+ /*
+ * If source and destination are not relatively aligned we use a
+ * slower permute loop.
+ */
+ xor r6,r4,r3
+ rldicl. r6,r6,0,(64-4)
+ bne .Lvmx_unaligned_copy
+
+ /* Get the destination 16B aligned */
+ neg r6,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-4)
+
+ bf cr7*4+3,1f
+err3; lbz r0,0(r4)
+ addi r4,r4,1
+err3; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+3: bf cr7*4+0,4f
+err3; ld r0,0(r4)
+ addi r4,r4,8
+err3; std r0,0(r3)
+ addi r3,r3,8
+
+4: sub r5,r5,r6
+
+ /* Get the desination 128B aligned */
+ neg r6,r3
+ srdi r7,r6,4
+ mtocrf 0x01,r7
+ clrldi r6,r6,(64-7)
+
+ li r9,16
+ li r10,32
+ li r11,48
+
+ bf cr7*4+3,5f
+err3; lvx vr1,r0,r4
+ addi r4,r4,16
+err3; stvx vr1,r0,r3
+ addi r3,r3,16
+
+5: bf cr7*4+2,6f
+err3; lvx vr1,r0,r4
+err3; lvx vr0,r4,r9
+ addi r4,r4,32
+err3; stvx vr1,r0,r3
+err3; stvx vr0,r3,r9
+ addi r3,r3,32
+
+6: bf cr7*4+1,7f
+err3; lvx vr3,r0,r4
+err3; lvx vr2,r4,r9
+err3; lvx vr1,r4,r10
+err3; lvx vr0,r4,r11
+ addi r4,r4,64
+err3; stvx vr3,r0,r3
+err3; stvx vr2,r3,r9
+err3; stvx vr1,r3,r10
+err3; stvx vr0,r3,r11
+ addi r3,r3,64
+
+7: sub r5,r5,r6
+ srdi r6,r5,7
+
+ std r14,STK_REG(r14)(r1)
+ std r15,STK_REG(r15)(r1)
+ std r16,STK_REG(r16)(r1)
+
+ li r12,64
+ li r14,80
+ li r15,96
+ li r16,112
+
+ mtctr r6
+
+ /*
+ * Now do cacheline sized loads and stores. By this stage the
+ * cacheline stores are also cacheline aligned.
+ */
+ .align 5
+8:
+err4; lvx vr7,r0,r4
+err4; lvx vr6,r4,r9
+err4; lvx vr5,r4,r10
+err4; lvx vr4,r4,r11
+err4; lvx vr3,r4,r12
+err4; lvx vr2,r4,r14
+err4; lvx vr1,r4,r15
+err4; lvx vr0,r4,r16
+ addi r4,r4,128
+err4; stvx vr7,r0,r3
+err4; stvx vr6,r3,r9
+err4; stvx vr5,r3,r10
+err4; stvx vr4,r3,r11
+err4; stvx vr3,r3,r12
+err4; stvx vr2,r3,r14
+err4; stvx vr1,r3,r15
+err4; stvx vr0,r3,r16
+ addi r3,r3,128
+ bdnz 8b
+
+ ld r14,STK_REG(r14)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r16,STK_REG(r16)(r1)
+
+ /* Up to 127B to go */
+ clrldi r5,r5,(64-7)
+ srdi r6,r5,4
+ mtocrf 0x01,r6
+
+ bf cr7*4+1,9f
+err3; lvx vr3,r0,r4
+err3; lvx vr2,r4,r9
+err3; lvx vr1,r4,r10
+err3; lvx vr0,r4,r11
+ addi r4,r4,64
+err3; stvx vr3,r0,r3
+err3; stvx vr2,r3,r9
+err3; stvx vr1,r3,r10
+err3; stvx vr0,r3,r11
+ addi r3,r3,64
+
+9: bf cr7*4+2,10f
+err3; lvx vr1,r0,r4
+err3; lvx vr0,r4,r9
+ addi r4,r4,32
+err3; stvx vr1,r0,r3
+err3; stvx vr0,r3,r9
+ addi r3,r3,32
+
+10: bf cr7*4+3,11f
+err3; lvx vr1,r0,r4
+ addi r4,r4,16
+err3; stvx vr1,r0,r3
+ addi r3,r3,16
+
+ /* Up to 15B to go */
+11: clrldi r5,r5,(64-4)
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err3; ld r0,0(r4)
+ addi r4,r4,8
+err3; std r0,0(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+err3; lbz r0,0(r4)
+err3; stb r0,0(r3)
+
+15: addi r1,r1,STACKFRAMESIZE
+ b .exit_vmx_copy /* tail call optimise */
+
+.Lvmx_unaligned_copy:
+ /* Get the destination 16B aligned */
+ neg r6,r3
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-4)
+
+ bf cr7*4+3,1f
+err3; lbz r0,0(r4)
+ addi r4,r4,1
+err3; stb r0,0(r3)
+ addi r3,r3,1
+
+1: bf cr7*4+2,2f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+2: bf cr7*4+1,3f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+3: bf cr7*4+0,4f
+err3; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err3; lwz r7,4(r4)
+ addi r4,r4,8
+err3; stw r0,0(r3)
+err3; stw r7,4(r3)
+ addi r3,r3,8
+
+4: sub r5,r5,r6
+
+ /* Get the desination 128B aligned */
+ neg r6,r3
+ srdi r7,r6,4
+ mtocrf 0x01,r7
+ clrldi r6,r6,(64-7)
+
+ li r9,16
+ li r10,32
+ li r11,48
+
+ lvsl vr16,0,r4 /* Setup permute control vector */
+err3; lvx vr0,0,r4
+ addi r4,r4,16
+
+ bf cr7*4+3,5f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ addi r4,r4,16
+err3; stvx vr8,r0,r3
+ addi r3,r3,16
+ vor vr0,vr1,vr1
+
+5: bf cr7*4+2,6f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+err3; lvx vr0,r4,r9
+ vperm vr9,vr1,vr0,vr16
+ addi r4,r4,32
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+ addi r3,r3,32
+
+6: bf cr7*4+1,7f
+err3; lvx vr3,r0,r4
+ vperm vr8,vr0,vr3,vr16
+err3; lvx vr2,r4,r9
+ vperm vr9,vr3,vr2,vr16
+err3; lvx vr1,r4,r10
+ vperm vr10,vr2,vr1,vr16
+err3; lvx vr0,r4,r11
+ vperm vr11,vr1,vr0,vr16
+ addi r4,r4,64
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+err3; stvx vr10,r3,r10
+err3; stvx vr11,r3,r11
+ addi r3,r3,64
+
+7: sub r5,r5,r6
+ srdi r6,r5,7
+
+ std r14,STK_REG(r14)(r1)
+ std r15,STK_REG(r15)(r1)
+ std r16,STK_REG(r16)(r1)
+
+ li r12,64
+ li r14,80
+ li r15,96
+ li r16,112
+
+ mtctr r6
+
+ /*
+ * Now do cacheline sized loads and stores. By this stage the
+ * cacheline stores are also cacheline aligned.
+ */
+ .align 5
+8:
+err4; lvx vr7,r0,r4
+ vperm vr8,vr0,vr7,vr16
+err4; lvx vr6,r4,r9
+ vperm vr9,vr7,vr6,vr16
+err4; lvx vr5,r4,r10
+ vperm vr10,vr6,vr5,vr16
+err4; lvx vr4,r4,r11
+ vperm vr11,vr5,vr4,vr16
+err4; lvx vr3,r4,r12
+ vperm vr12,vr4,vr3,vr16
+err4; lvx vr2,r4,r14
+ vperm vr13,vr3,vr2,vr16
+err4; lvx vr1,r4,r15
+ vperm vr14,vr2,vr1,vr16
+err4; lvx vr0,r4,r16
+ vperm vr15,vr1,vr0,vr16
+ addi r4,r4,128
+err4; stvx vr8,r0,r3
+err4; stvx vr9,r3,r9
+err4; stvx vr10,r3,r10
+err4; stvx vr11,r3,r11
+err4; stvx vr12,r3,r12
+err4; stvx vr13,r3,r14
+err4; stvx vr14,r3,r15
+err4; stvx vr15,r3,r16
+ addi r3,r3,128
+ bdnz 8b
+
+ ld r14,STK_REG(r14)(r1)
+ ld r15,STK_REG(r15)(r1)
+ ld r16,STK_REG(r16)(r1)
+
+ /* Up to 127B to go */
+ clrldi r5,r5,(64-7)
+ srdi r6,r5,4
+ mtocrf 0x01,r6
+
+ bf cr7*4+1,9f
+err3; lvx vr3,r0,r4
+ vperm vr8,vr0,vr3,vr16
+err3; lvx vr2,r4,r9
+ vperm vr9,vr3,vr2,vr16
+err3; lvx vr1,r4,r10
+ vperm vr10,vr2,vr1,vr16
+err3; lvx vr0,r4,r11
+ vperm vr11,vr1,vr0,vr16
+ addi r4,r4,64
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+err3; stvx vr10,r3,r10
+err3; stvx vr11,r3,r11
+ addi r3,r3,64
+
+9: bf cr7*4+2,10f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+err3; lvx vr0,r4,r9
+ vperm vr9,vr1,vr0,vr16
+ addi r4,r4,32
+err3; stvx vr8,r0,r3
+err3; stvx vr9,r3,r9
+ addi r3,r3,32
+
+10: bf cr7*4+3,11f
+err3; lvx vr1,r0,r4
+ vperm vr8,vr0,vr1,vr16
+ addi r4,r4,16
+err3; stvx vr8,r0,r3
+ addi r3,r3,16
+
+ /* Up to 15B to go */
+11: clrldi r5,r5,(64-4)
+ addi r4,r4,-16 /* Unwind the +16 load offset */
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err3; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err3; lwz r6,4(r4)
+ addi r4,r4,8
+err3; stw r0,0(r3)
+err3; stw r6,4(r3)
+ addi r3,r3,8
+
+12: bf cr7*4+1,13f
+err3; lwz r0,0(r4)
+ addi r4,r4,4
+err3; stw r0,0(r3)
+ addi r3,r3,4
+
+13: bf cr7*4+2,14f
+err3; lhz r0,0(r4)
+ addi r4,r4,2
+err3; sth r0,0(r3)
+ addi r3,r3,2
+
+14: bf cr7*4+3,15f
+err3; lbz r0,0(r4)
+err3; stb r0,0(r3)
+
+15: addi r1,r1,STACKFRAMESIZE
+ b .exit_vmx_copy /* tail call optimise */
+#endif /* CONFiG_ALTIVEC */
diff --git a/arch/powerpc/lib/copyuser_power7_vmx.c b/arch/powerpc/lib/copyuser_power7_vmx.c
new file mode 100644
index 00000000000..6e1efadac48
--- /dev/null
+++ b/arch/powerpc/lib/copyuser_power7_vmx.c
@@ -0,0 +1,50 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2011
+ *
+ * Authors: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
+ * Anton Blanchard <anton@au.ibm.com>
+ */
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+
+int enter_vmx_copy(void)
+{
+ if (in_interrupt())
+ return 0;
+
+ /* This acts as preempt_disable() as well and will make
+ * enable_kernel_altivec(). We need to disable page faults
+ * as they can call schedule and thus make us lose the VMX
+ * context. So on page faults, we just fail which will cause
+ * a fallback to the normal non-vmx copy.
+ */
+ pagefault_disable();
+
+ enable_kernel_altivec();
+
+ return 1;
+}
+
+/*
+ * This function must return 0 because we tail call optimise when calling
+ * from __copy_tofrom_user_power7 which returns 0 on success.
+ */
+int exit_vmx_copy(void)
+{
+ pagefault_enable();
+ return 0;
+}
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index f60e006d90c..388b95e1a00 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -78,11 +78,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
"tlbwe %1,%3,%5\n"
"tlbwe %0,%3,%6\n"
:
-#ifdef CONFIG_PPC47x
- : "r" (PPC47x_TLB2_S_RWX),
-#else
: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-#endif
"r" (phys),
"r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
"r" (entry),
@@ -221,7 +217,7 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
{
u64 size;
-#ifndef CONFIG_RELOCATABLE
+#ifndef CONFIG_NONSTATIC_KERNEL
/* We don't currently support the first MEMBLOCK not mapping 0
* physical on those processors
*/
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 991ee813d2a..3787b61f7d2 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -21,6 +21,8 @@ obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
tlb_hash$(CONFIG_WORD_SIZE).o \
mmu_context_hash$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_PPC_ICSWX) += icswx.o
+obj-$(CONFIG_PPC_ICSWX_PID) += icswx_pid.o
obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
obj-$(CONFIG_PPC_FSL_BOOK3E) += fsl_booke_mmu.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5efe8c96d37..2f0d1b032a8 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -44,6 +44,8 @@
#include <asm/siginfo.h>
#include <mm/mmu_decl.h>
+#include "icswx.h"
+
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs)
{
@@ -143,6 +145,21 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
is_write = error_code & ESR_DST;
#endif /* CONFIG_4xx || CONFIG_BOOKE */
+#ifdef CONFIG_PPC_ICSWX
+ /*
+ * we need to do this early because this "data storage
+ * interrupt" does not update the DAR/DEAR so we don't want to
+ * look at it
+ */
+ if (error_code & ICSWX_DSI_UCT) {
+ int ret;
+
+ ret = acop_handle_fault(regs, address, error_code);
+ if (ret)
+ return ret;
+ }
+#endif
+
if (notify_page_fault(regs))
return 0;
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index 343ad0b8726..3bc700655fc 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -37,31 +37,32 @@ static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
return found;
}
-void book3e_hugetlb_preload(struct mm_struct *mm, unsigned long ea, pte_t pte)
+void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
+ pte_t pte)
{
unsigned long mas1, mas2;
u64 mas7_3;
unsigned long psize, tsize, shift;
unsigned long flags;
+ struct mm_struct *mm;
#ifdef CONFIG_PPC_FSL_BOOK3E
- int index, lz, ncams;
- struct vm_area_struct *vma;
+ int index, ncams;
#endif
if (unlikely(is_kernel_addr(ea)))
return;
+ mm = vma->vm_mm;
+
#ifdef CONFIG_PPC_MM_SLICES
- psize = mmu_get_tsize(get_slice_psize(mm, ea));
- tsize = mmu_get_psize(psize);
+ psize = get_slice_psize(mm, ea);
+ tsize = mmu_get_tsize(psize);
shift = mmu_psize_defs[psize].shift;
#else
- vma = find_vma(mm, ea);
- psize = vma_mmu_pagesize(vma); /* returns actual size in bytes */
- asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (psize));
- shift = 31 - lz;
- tsize = 21 - lz;
+ psize = vma_mmu_pagesize(vma);
+ shift = __ilog2(psize);
+ tsize = shift - 10;
#endif
/*
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 8558b572e55..a8b3cc7d90f 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -29,22 +29,22 @@ unsigned int HPAGE_SHIFT;
/*
* Tracks gpages after the device tree is scanned and before the
- * huge_boot_pages list is ready. On 64-bit implementations, this is
- * just used to track 16G pages and so is a single array. 32-bit
- * implementations may have more than one gpage size due to limitations
- * of the memory allocators, so we need multiple arrays
+ * huge_boot_pages list is ready. On non-Freescale implementations, this is
+ * just used to track 16G pages and so is a single array. FSL-based
+ * implementations may have more than one gpage size, so we need multiple
+ * arrays
*/
-#ifdef CONFIG_PPC64
-#define MAX_NUMBER_GPAGES 1024
-static u64 gpage_freearray[MAX_NUMBER_GPAGES];
-static unsigned nr_gpages;
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define MAX_NUMBER_GPAGES 128
struct psize_gpages {
u64 gpage_list[MAX_NUMBER_GPAGES];
unsigned int nr_gpages;
};
static struct psize_gpages gpage_freearray[MMU_PAGE_COUNT];
+#else
+#define MAX_NUMBER_GPAGES 1024
+static u64 gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
#endif
static inline int shift_to_mmu_psize(unsigned int shift)
@@ -115,12 +115,12 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
struct kmem_cache *cachep;
pte_t *new;
-#ifdef CONFIG_PPC64
- cachep = PGT_CACHE(pdshift - pshift);
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
int i;
int num_hugepd = 1 << (pshift - pdshift);
cachep = hugepte_cache;
+#else
+ cachep = PGT_CACHE(pdshift - pshift);
#endif
new = kmem_cache_zalloc(cachep, GFP_KERNEL|__GFP_REPEAT);
@@ -132,12 +132,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
return -ENOMEM;
spin_lock(&mm->page_table_lock);
-#ifdef CONFIG_PPC64
- if (!hugepd_none(*hpdp))
- kmem_cache_free(cachep, new);
- else
- hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
-#else
+#ifdef CONFIG_PPC_FSL_BOOK3E
/*
* We have multiple higher-level entries that point to the same
* actual pte location. Fill in each as we go and backtrack on error.
@@ -156,11 +151,28 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
hpdp->pd = 0;
kmem_cache_free(cachep, new);
}
+#else
+ if (!hugepd_none(*hpdp))
+ kmem_cache_free(cachep, new);
+ else
+ hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
#endif
spin_unlock(&mm->page_table_lock);
return 0;
}
+/*
+ * These macros define how to determine which level of the page table holds
+ * the hpdp.
+ */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#define HUGEPD_PGD_SHIFT PGDIR_SHIFT
+#define HUGEPD_PUD_SHIFT PUD_SHIFT
+#else
+#define HUGEPD_PGD_SHIFT PUD_SHIFT
+#define HUGEPD_PUD_SHIFT PMD_SHIFT
+#endif
+
pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
{
pgd_t *pg;
@@ -173,12 +185,13 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
addr &= ~(sz-1);
pg = pgd_offset(mm, addr);
- if (pshift >= PUD_SHIFT) {
+
+ if (pshift >= HUGEPD_PGD_SHIFT) {
hpdp = (hugepd_t *)pg;
} else {
pdshift = PUD_SHIFT;
pu = pud_alloc(mm, pg, addr);
- if (pshift >= PMD_SHIFT) {
+ if (pshift >= HUGEPD_PUD_SHIFT) {
hpdp = (hugepd_t *)pu;
} else {
pdshift = PMD_SHIFT;
@@ -198,7 +211,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz
return hugepte_offset(hpdp, addr, pdshift);
}
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
*/
@@ -318,7 +331,7 @@ void __init reserve_hugetlb_gpages(void)
}
}
-#else /* PPC64 */
+#else /* !PPC_FSL_BOOK3E */
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
@@ -356,7 +369,7 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
return 0;
}
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define HUGEPD_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct hugepd_freelist)) / sizeof(pte_t))
@@ -416,11 +429,11 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif
unsigned long pdmask = ~((1UL << pdshift) - 1);
unsigned int num_hugepd = 1;
-#ifdef CONFIG_PPC64
- unsigned int shift = hugepd_shift(*hpdp);
-#else
- /* Note: On 32-bit the hpdp may be the first of several */
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /* Note: On fsl the hpdp may be the first of several */
num_hugepd = (1 << (hugepd_shift(*hpdp) - pdshift));
+#else
+ unsigned int shift = hugepd_shift(*hpdp);
#endif
start &= pdmask;
@@ -438,10 +451,11 @@ static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshif
hpdp->pd = 0;
tlb->need_flush = 1;
-#ifdef CONFIG_PPC64
- pgtable_free_tlb(tlb, hugepte, pdshift - shift);
-#else
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
hugepd_free(tlb, hugepte);
+#else
+ pgtable_free_tlb(tlb, hugepte, pdshift - shift);
#endif
}
@@ -454,14 +468,23 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
unsigned long start;
start = addr;
- pmd = pmd_offset(pud, addr);
do {
+ pmd = pmd_offset(pud, addr);
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd))
continue;
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /*
+ * Increment next by the size of the huge mapping since
+ * there may be more than one entry at this level for a
+ * single hugepage, but all of them point to
+ * the same kmem cache that holds the hugepte.
+ */
+ next = addr + (1 << hugepd_shift(*(hugepd_t *)pmd));
+#endif
free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT,
addr, next, floor, ceiling);
- } while (pmd++, addr = next, addr != end);
+ } while (addr = next, addr != end);
start &= PUD_MASK;
if (start < floor)
@@ -488,8 +511,8 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
unsigned long start;
start = addr;
- pud = pud_offset(pgd, addr);
do {
+ pud = pud_offset(pgd, addr);
next = pud_addr_end(addr, end);
if (!is_hugepd(pud)) {
if (pud_none_or_clear_bad(pud))
@@ -497,10 +520,19 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
ceiling);
} else {
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ /*
+ * Increment next by the size of the huge mapping since
+ * there may be more than one entry at this level for a
+ * single hugepage, but all of them point to
+ * the same kmem cache that holds the hugepte.
+ */
+ next = addr + (1 << hugepd_shift(*(hugepd_t *)pud));
+#endif
free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT,
addr, next, floor, ceiling);
}
- } while (pud++, addr = next, addr != end);
+ } while (addr = next, addr != end);
start &= PGDIR_MASK;
if (start < floor)
@@ -555,12 +587,12 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
continue;
hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
} else {
-#ifdef CONFIG_PPC32
+#ifdef CONFIG_PPC_FSL_BOOK3E
/*
* Increment next by the size of the huge mapping since
- * on 32-bit there may be more than one entry at the pgd
- * level for a single hugepage, but all of them point to
- * the same kmem cache that holds the hugepte.
+ * there may be more than one entry at the pgd level
+ * for a single hugepage, but all of them point to the
+ * same kmem cache that holds the hugepte.
*/
next = addr + (1 << hugepd_shift(*(hugepd_t *)pgd));
#endif
@@ -698,19 +730,17 @@ int gup_hugepd(hugepd_t *hugepd, unsigned pdshift,
return 1;
}
+#ifdef CONFIG_PPC_MM_SLICES
unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff,
unsigned long flags)
{
-#ifdef CONFIG_PPC_MM_SLICES
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
-#else
- return get_unmapped_area(file, addr, len, pgoff, flags);
-#endif
}
+#endif
unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
{
@@ -784,7 +814,7 @@ static int __init hugepage_setup_sz(char *str)
}
__setup("hugepagesz=", hugepage_setup_sz);
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
struct kmem_cache *hugepte_cache;
static int __init hugetlbpage_init(void)
{
diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c
new file mode 100644
index 00000000000..5d9a59eaad9
--- /dev/null
+++ b/arch/powerpc/mm/icswx.c
@@ -0,0 +1,273 @@
+/*
+ * ICSWX and ACOP Management
+ *
+ * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#include "icswx.h"
+
+/*
+ * The processor and its L2 cache cause the icswx instruction to
+ * generate a COP_REQ transaction on PowerBus. The transaction has no
+ * address, and the processor does not perform an MMU access to
+ * authenticate the transaction. The command portion of the PowerBus
+ * COP_REQ transaction includes the LPAR_ID (LPID) and the coprocessor
+ * Process ID (PID), which the coprocessor compares to the authorized
+ * LPID and PID held in the coprocessor, to determine if the process
+ * is authorized to generate the transaction. The data of the COP_REQ
+ * transaction is 128-byte or less in size and is placed in cacheable
+ * memory on a 128-byte cache line boundary.
+ *
+ * The task to use a coprocessor should use use_cop() to mark the use
+ * of the Coprocessor Type (CT) and context switching. On a server
+ * class processor, the PID register is used only for coprocessor
+ * management + * and so a coprocessor PID is allocated before
+ * executing icswx + * instruction. Drop_cop() is used to free the
+ * coprocessor PID.
+ *
+ * Example:
+ * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
+ * Each HFI have multiple windows. Each HFI window serves as a
+ * network device sending to and receiving from HFI network.
+ * HFI immediate send function uses icswx instruction. The immediate
+ * send function allows small (single cache-line) packets be sent
+ * without using the regular HFI send FIFO and doorbell, which are
+ * much slower than immediate send.
+ *
+ * For each task intending to use HFI immediate send, the HFI driver
+ * calls use_cop() to obtain a coprocessor PID for the task.
+ * The HFI driver then allocate a free HFI window and save the
+ * coprocessor PID to the HFI window to allow the task to use the
+ * HFI window.
+ *
+ * The HFI driver repeatedly creates immediate send packets and
+ * issues icswx instruction to send data through the HFI window.
+ * The HFI compares the coprocessor PID in the CPU PID register
+ * to the PID held in the HFI window to determine if the transaction
+ * is allowed.
+ *
+ * When the task to release the HFI window, the HFI driver calls
+ * drop_cop() to release the coprocessor PID.
+ */
+
+void switch_cop(struct mm_struct *next)
+{
+#ifdef CONFIG_ICSWX_PID
+ mtspr(SPRN_PID, next->context.cop_pid);
+#endif
+ mtspr(SPRN_ACOP, next->context.acop);
+}
+
+/**
+ * Start using a coprocessor.
+ * @acop: mask of coprocessor to be used.
+ * @mm: The mm the coprocessor to associate with. Most likely current mm.
+ *
+ * Return a positive PID if successful. Negative errno otherwise.
+ * The returned PID will be fed to the coprocessor to determine if an
+ * icswx transaction is authenticated.
+ */
+int use_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int ret;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX))
+ return -ENODEV;
+
+ if (!mm || !acop)
+ return -EINVAL;
+
+ /* The page_table_lock ensures mm_users won't change under us */
+ spin_lock(&mm->page_table_lock);
+ spin_lock(mm->context.cop_lockp);
+
+ ret = get_cop_pid(mm);
+ if (ret < 0)
+ goto out;
+
+ /* update acop */
+ mm->context.acop |= acop;
+
+ sync_cop(mm);
+
+ /*
+ * If this is a threaded process then there might be other threads
+ * running. We need to send an IPI to force them to pick up any
+ * change in PID and ACOP.
+ */
+ if (atomic_read(&mm->mm_users) > 1)
+ smp_call_function(sync_cop, mm, 1);
+
+out:
+ spin_unlock(mm->context.cop_lockp);
+ spin_unlock(&mm->page_table_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(use_cop);
+
+/**
+ * Stop using a coprocessor.
+ * @acop: mask of coprocessor to be stopped.
+ * @mm: The mm the coprocessor associated with.
+ */
+void drop_cop(unsigned long acop, struct mm_struct *mm)
+{
+ int free_pid;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX))
+ return;
+
+ if (WARN_ON_ONCE(!mm))
+ return;
+
+ /* The page_table_lock ensures mm_users won't change under us */
+ spin_lock(&mm->page_table_lock);
+ spin_lock(mm->context.cop_lockp);
+
+ mm->context.acop &= ~acop;
+
+ free_pid = disable_cop_pid(mm);
+ sync_cop(mm);
+
+ /*
+ * If this is a threaded process then there might be other threads
+ * running. We need to send an IPI to force them to pick up any
+ * change in PID and ACOP.
+ */
+ if (atomic_read(&mm->mm_users) > 1)
+ smp_call_function(sync_cop, mm, 1);
+
+ if (free_pid != COP_PID_NONE)
+ free_cop_pid(free_pid);
+
+ spin_unlock(mm->context.cop_lockp);
+ spin_unlock(&mm->page_table_lock);
+}
+EXPORT_SYMBOL_GPL(drop_cop);
+
+static int acop_use_cop(int ct)
+{
+ /* todo */
+ return -1;
+}
+
+/*
+ * Get the instruction word at the NIP
+ */
+static u32 acop_get_inst(struct pt_regs *regs)
+{
+ u32 inst;
+ u32 __user *p;
+
+ p = (u32 __user *)regs->nip;
+ if (!access_ok(VERIFY_READ, p, sizeof(*p)))
+ return 0;
+
+ if (__get_user(inst, p))
+ return 0;
+
+ return inst;
+}
+
+/**
+ * @regs: regsiters at time of interrupt
+ * @address: storage address
+ * @error_code: Fault code, usually the DSISR or ESR depending on
+ * processor type
+ *
+ * Return 0 if we are able to resolve the data storage fault that
+ * results from a CT miss in the ACOP register.
+ */
+int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ int ct;
+ u32 inst = 0;
+
+ if (!cpu_has_feature(CPU_FTR_ICSWX)) {
+ pr_info("No coprocessors available");
+ _exception(SIGILL, regs, ILL_ILLOPN, address);
+ }
+
+ if (!user_mode(regs)) {
+ /* this could happen if the HV denies the
+ * kernel access, for now we just die */
+ die("ICSWX from kernel failed", regs, SIGSEGV);
+ }
+
+ /* Some implementations leave us a hint for the CT */
+ ct = ICSWX_GET_CT_HINT(error_code);
+ if (ct < 0) {
+ /* we have to peek at the instruction word to figure out CT */
+ u32 ccw;
+ u32 rs;
+
+ inst = acop_get_inst(regs);
+ if (inst == 0)
+ return -1;
+
+ rs = (inst >> (31 - 10)) & 0x1f;
+ ccw = regs->gpr[rs];
+ ct = (ccw >> 16) & 0x3f;
+ }
+
+ if (!acop_use_cop(ct))
+ return 0;
+
+ /* at this point the CT is unknown to the system */
+ pr_warn("%s[%d]: Coprocessor %d is unavailable",
+ current->comm, current->pid, ct);
+
+ /* get inst if we don't already have it */
+ if (inst == 0) {
+ inst = acop_get_inst(regs);
+ if (inst == 0)
+ return -1;
+ }
+
+ /* Check if the instruction is the "record form" */
+ if (inst & 1) {
+ /*
+ * the instruction is "record" form so we can reject
+ * using CR0
+ */
+ regs->ccr &= ~(0xful << 28);
+ regs->ccr |= ICSWX_RC_NOT_FOUND << 28;
+
+ /* Move on to the next instruction */
+ regs->nip += 4;
+ } else {
+ /*
+ * There is no architected mechanism to report a bad
+ * CT so we could either SIGILL or report nothing.
+ * Since the non-record version should only bu used
+ * for "hints" or "don't care" we should probably do
+ * nothing. However, I could see how some people
+ * might want an SIGILL so it here if you want it.
+ */
+#ifdef CONFIG_PPC_ICSWX_USE_SIGILL
+ _exception(SIGILL, regs, ILL_ILLOPN, address);
+#else
+ regs->nip += 4;
+#endif
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acop_handle_fault);
diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h
new file mode 100644
index 00000000000..42176bd0884
--- /dev/null
+++ b/arch/powerpc/mm/icswx.h
@@ -0,0 +1,62 @@
+#ifndef _ARCH_POWERPC_MM_ICSWX_H_
+#define _ARCH_POWERPC_MM_ICSWX_H_
+
+/*
+ * ICSWX and ACOP Management
+ *
+ * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/mmu_context.h>
+
+/* also used to denote that PIDs are not used */
+#define COP_PID_NONE 0
+
+static inline void sync_cop(void *arg)
+{
+ struct mm_struct *mm = arg;
+
+ if (mm == current->active_mm)
+ switch_cop(current->active_mm);
+}
+
+#ifdef CONFIG_PPC_ICSWX_PID
+extern int get_cop_pid(struct mm_struct *mm);
+extern int disable_cop_pid(struct mm_struct *mm);
+extern void free_cop_pid(int free_pid);
+#else
+#define get_cop_pid(m) (COP_PID_NONE)
+#define disable_cop_pid(m) (COP_PID_NONE)
+#define free_cop_pid(p)
+#endif
+
+/*
+ * These are implementation bits for architected registers. If this
+ * ever becomes architecture the should be moved to reg.h et. al.
+ */
+/* UCT is the same bit for Server and Embedded */
+#define ICSWX_DSI_UCT 0x00004000 /* Unavailable Coprocessor Type */
+
+#ifdef CONFIG_PPC_BOOK3E
+/* Embedded implementation gives us no hints as to what the CT is */
+#define ICSWX_GET_CT_HINT(x) (-1)
+#else
+/* Server implementation contains the CT value in the DSISR */
+#define ICSWX_DSISR_CTMASK 0x00003f00
+#define ICSWX_GET_CT_HINT(x) (((x) & ICSWX_DSISR_CTMASK) >> 8)
+#endif
+
+#define ICSWX_RC_STARTED 0x8 /* The request has been started */
+#define ICSWX_RC_NOT_IDLE 0x4 /* No coprocessor found idle */
+#define ICSWX_RC_NOT_FOUND 0x2 /* No coprocessor found */
+#define ICSWX_RC_UNDEFINED 0x1 /* Reserved */
+
+extern int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code);
+#endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */
diff --git a/arch/powerpc/mm/icswx_pid.c b/arch/powerpc/mm/icswx_pid.c
new file mode 100644
index 00000000000..91e30eb7d05
--- /dev/null
+++ b/arch/powerpc/mm/icswx_pid.c
@@ -0,0 +1,87 @@
+/*
+ * ICSWX and ACOP/PID Management
+ *
+ * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include "icswx.h"
+
+#define COP_PID_MIN (COP_PID_NONE + 1)
+#define COP_PID_MAX (0xFFFF)
+
+static DEFINE_SPINLOCK(mmu_context_acop_lock);
+static DEFINE_IDA(cop_ida);
+
+static int new_cop_pid(struct ida *ida, int min_id, int max_id,
+ spinlock_t *lock)
+{
+ int index;
+ int err;
+
+again:
+ if (!ida_pre_get(ida, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock(lock);
+ err = ida_get_new_above(ida, min_id, &index);
+ spin_unlock(lock);
+
+ if (err == -EAGAIN)
+ goto again;
+ else if (err)
+ return err;
+
+ if (index > max_id) {
+ spin_lock(lock);
+ ida_remove(ida, index);
+ spin_unlock(lock);
+ return -ENOMEM;
+ }
+
+ return index;
+}
+
+int get_cop_pid(struct mm_struct *mm)
+{
+ int pid;
+
+ if (mm->context.cop_pid == COP_PID_NONE) {
+ pid = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
+ &mmu_context_acop_lock);
+ if (pid >= 0)
+ mm->context.cop_pid = pid;
+ }
+ return mm->context.cop_pid;
+}
+
+int disable_cop_pid(struct mm_struct *mm)
+{
+ int free_pid = COP_PID_NONE;
+
+ if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
+ free_pid = mm->context.cop_pid;
+ mm->context.cop_pid = COP_PID_NONE;
+ }
+ return free_pid;
+}
+
+void free_cop_pid(int free_pid)
+{
+ spin_lock(&mmu_context_acop_lock);
+ ida_remove(&cop_ida, free_pid);
+ spin_unlock(&mmu_context_acop_lock);
+}
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 58861fa1220..6157be2a704 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -65,6 +65,13 @@ phys_addr_t memstart_addr = (phys_addr_t)~0ull;
EXPORT_SYMBOL(memstart_addr);
phys_addr_t kernstart_addr;
EXPORT_SYMBOL(kernstart_addr);
+
+#ifdef CONFIG_RELOCATABLE_PPC32
+/* Used in __va()/__pa() */
+long long virt_phys_offset;
+EXPORT_SYMBOL(virt_phys_offset);
+#endif
+
phys_addr_t lowmem_end_addr;
int boot_mapsize;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 8e2eb6611b0..d974b79a306 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -51,6 +51,7 @@
#include <asm/vdso.h>
#include <asm/fixmap.h>
#include <asm/swiotlb.h>
+#include <asm/rtas.h>
#include "mmu_decl.h"
@@ -553,7 +554,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
#if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \
&& defined(CONFIG_HUGETLB_PAGE)
if (is_vm_hugetlb_page(vma))
- book3e_hugetlb_preload(vma->vm_mm, address, *ptep);
+ book3e_hugetlb_preload(vma, address, *ptep);
#endif
}
@@ -585,3 +586,23 @@ static int add_system_ram_resources(void)
return 0;
}
subsys_initcall(add_system_ram_resources);
+
+#ifdef CONFIG_STRICT_DEVMEM
+/*
+ * devmem_is_allowed(): check to see if /dev/mem access to a certain address
+ * is valid. The argument is a physical page number.
+ *
+ * Access has to be given to non-kernel-ram areas as well, these contain the
+ * PCI mmio resources as well as potential bios/acpi data regions.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+ if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+ return 0;
+ if (!page_is_ram(pfn))
+ return 1;
+ if (page_is_rtas_user_buf(pfn))
+ return 1;
+ return 0;
+}
+#endif /* CONFIG_STRICT_DEVMEM */
diff --git a/arch/powerpc/mm/mmap_64.c b/arch/powerpc/mm/mmap_64.c
index 5a783d8e8e8..67a42ed0d2f 100644
--- a/arch/powerpc/mm/mmap_64.c
+++ b/arch/powerpc/mm/mmap_64.c
@@ -53,14 +53,6 @@ static inline int mmap_is_legacy(void)
return sysctl_legacy_va_layout;
}
-/*
- * Since get_random_int() returns the same value within a 1 jiffy window,
- * we will almost always get the same randomisation for the stack and mmap
- * region. This will mean the relative distance between stack and mmap will
- * be the same.
- *
- * To avoid this we can shift the randomness by 1 bit.
- */
static unsigned long mmap_rnd(void)
{
unsigned long rnd = 0;
@@ -68,11 +60,11 @@ static unsigned long mmap_rnd(void)
if (current->flags & PF_RANDOMIZE) {
/* 8MB for 32bit, 1GB for 64bit */
if (is_32bit_task())
- rnd = (long)(get_random_int() % (1<<(22-PAGE_SHIFT)));
+ rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT)));
else
- rnd = (long)(get_random_int() % (1<<(29-PAGE_SHIFT)));
+ rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT)));
}
- return (rnd << PAGE_SHIFT) * 2;
+ return rnd << PAGE_SHIFT;
}
static inline unsigned long mmap_base(void)
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index ca988a3d5fb..40677aa0190 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -24,200 +24,7 @@
#include <asm/mmu_context.h>
-#ifdef CONFIG_PPC_ICSWX
-/*
- * The processor and its L2 cache cause the icswx instruction to
- * generate a COP_REQ transaction on PowerBus. The transaction has
- * no address, and the processor does not perform an MMU access
- * to authenticate the transaction. The command portion of the
- * PowerBus COP_REQ transaction includes the LPAR_ID (LPID) and
- * the coprocessor Process ID (PID), which the coprocessor compares
- * to the authorized LPID and PID held in the coprocessor, to determine
- * if the process is authorized to generate the transaction.
- * The data of the COP_REQ transaction is 128-byte or less and is
- * placed in cacheable memory on a 128-byte cache line boundary.
- *
- * The task to use a coprocessor should use use_cop() to allocate
- * a coprocessor PID before executing icswx instruction. use_cop()
- * also enables the coprocessor context switching. Drop_cop() is
- * used to free the coprocessor PID.
- *
- * Example:
- * Host Fabric Interface (HFI) is a PowerPC network coprocessor.
- * Each HFI have multiple windows. Each HFI window serves as a
- * network device sending to and receiving from HFI network.
- * HFI immediate send function uses icswx instruction. The immediate
- * send function allows small (single cache-line) packets be sent
- * without using the regular HFI send FIFO and doorbell, which are
- * much slower than immediate send.
- *
- * For each task intending to use HFI immediate send, the HFI driver
- * calls use_cop() to obtain a coprocessor PID for the task.
- * The HFI driver then allocate a free HFI window and save the
- * coprocessor PID to the HFI window to allow the task to use the
- * HFI window.
- *
- * The HFI driver repeatedly creates immediate send packets and
- * issues icswx instruction to send data through the HFI window.
- * The HFI compares the coprocessor PID in the CPU PID register
- * to the PID held in the HFI window to determine if the transaction
- * is allowed.
- *
- * When the task to release the HFI window, the HFI driver calls
- * drop_cop() to release the coprocessor PID.
- */
-
-#define COP_PID_NONE 0
-#define COP_PID_MIN (COP_PID_NONE + 1)
-#define COP_PID_MAX (0xFFFF)
-
-static DEFINE_SPINLOCK(mmu_context_acop_lock);
-static DEFINE_IDA(cop_ida);
-
-void switch_cop(struct mm_struct *next)
-{
- mtspr(SPRN_PID, next->context.cop_pid);
- mtspr(SPRN_ACOP, next->context.acop);
-}
-
-static int new_cop_pid(struct ida *ida, int min_id, int max_id,
- spinlock_t *lock)
-{
- int index;
- int err;
-
-again:
- if (!ida_pre_get(ida, GFP_KERNEL))
- return -ENOMEM;
-
- spin_lock(lock);
- err = ida_get_new_above(ida, min_id, &index);
- spin_unlock(lock);
-
- if (err == -EAGAIN)
- goto again;
- else if (err)
- return err;
-
- if (index > max_id) {
- spin_lock(lock);
- ida_remove(ida, index);
- spin_unlock(lock);
- return -ENOMEM;
- }
-
- return index;
-}
-
-static void sync_cop(void *arg)
-{
- struct mm_struct *mm = arg;
-
- if (mm == current->active_mm)
- switch_cop(current->active_mm);
-}
-
-/**
- * Start using a coprocessor.
- * @acop: mask of coprocessor to be used.
- * @mm: The mm the coprocessor to associate with. Most likely current mm.
- *
- * Return a positive PID if successful. Negative errno otherwise.
- * The returned PID will be fed to the coprocessor to determine if an
- * icswx transaction is authenticated.
- */
-int use_cop(unsigned long acop, struct mm_struct *mm)
-{
- int ret;
-
- if (!cpu_has_feature(CPU_FTR_ICSWX))
- return -ENODEV;
-
- if (!mm || !acop)
- return -EINVAL;
-
- /* The page_table_lock ensures mm_users won't change under us */
- spin_lock(&mm->page_table_lock);
- spin_lock(mm->context.cop_lockp);
-
- if (mm->context.cop_pid == COP_PID_NONE) {
- ret = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX,
- &mmu_context_acop_lock);
- if (ret < 0)
- goto out;
-
- mm->context.cop_pid = ret;
- }
- mm->context.acop |= acop;
-
- sync_cop(mm);
-
- /*
- * If this is a threaded process then there might be other threads
- * running. We need to send an IPI to force them to pick up any
- * change in PID and ACOP.
- */
- if (atomic_read(&mm->mm_users) > 1)
- smp_call_function(sync_cop, mm, 1);
-
- ret = mm->context.cop_pid;
-
-out:
- spin_unlock(mm->context.cop_lockp);
- spin_unlock(&mm->page_table_lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(use_cop);
-
-/**
- * Stop using a coprocessor.
- * @acop: mask of coprocessor to be stopped.
- * @mm: The mm the coprocessor associated with.
- */
-void drop_cop(unsigned long acop, struct mm_struct *mm)
-{
- int free_pid = COP_PID_NONE;
-
- if (!cpu_has_feature(CPU_FTR_ICSWX))
- return;
-
- if (WARN_ON_ONCE(!mm))
- return;
-
- /* The page_table_lock ensures mm_users won't change under us */
- spin_lock(&mm->page_table_lock);
- spin_lock(mm->context.cop_lockp);
-
- mm->context.acop &= ~acop;
-
- if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) {
- free_pid = mm->context.cop_pid;
- mm->context.cop_pid = COP_PID_NONE;
- }
-
- sync_cop(mm);
-
- /*
- * If this is a threaded process then there might be other threads
- * running. We need to send an IPI to force them to pick up any
- * change in PID and ACOP.
- */
- if (atomic_read(&mm->mm_users) > 1)
- smp_call_function(sync_cop, mm, 1);
-
- if (free_pid != COP_PID_NONE) {
- spin_lock(&mmu_context_acop_lock);
- ida_remove(&cop_ida, free_pid);
- spin_unlock(&mmu_context_acop_lock);
- }
-
- spin_unlock(mm->context.cop_lockp);
- spin_unlock(&mm->page_table_lock);
-}
-EXPORT_SYMBOL_GPL(drop_cop);
-
-#endif /* CONFIG_PPC_ICSWX */
+#include "icswx.h"
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index e6eea0ac80c..c0189c169bb 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -386,7 +386,7 @@ static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
of_node_put(memory);
}
-static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
+static unsigned long read_n_cells(int n, const unsigned int **buf)
{
unsigned long result = 0;
@@ -947,7 +947,7 @@ static struct notifier_block __cpuinitdata ppc64_numa_nb = {
.priority = 1 /* Must run before sched domains notifier. */
};
-static void mark_reserved_regions_for_nid(int nid)
+static void __init mark_reserved_regions_for_nid(int nid)
{
struct pglist_data *node = NODE_DATA(nid);
struct memblock_region *reg;
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index dc4a5f385e4..ff672bd8fea 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -94,11 +94,11 @@
srdi r15,r16,60 /* get region */
rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
- bne- dtlb_miss_fault_bolted
+ bne- dtlb_miss_fault_bolted /* Bail if fault addr is invalid */
rlwinm r10,r11,32-19,27,27
rlwimi r10,r11,32-16,19,19
- cmpwi r15,0
+ cmpwi r15,0 /* user vs kernel check */
ori r10,r10,_PAGE_PRESENT
oris r11,r10,_PAGE_ACCESSED@h
@@ -120,44 +120,38 @@ tlb_miss_common_bolted:
rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
cmpldi cr0,r14,0
clrrdi r15,r15,3
- beq tlb_miss_fault_bolted
+ beq tlb_miss_fault_bolted /* No PGDIR, bail */
BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
PPC_TLBSRX_DOT(0,r16)
- ldx r14,r14,r15
- beq normal_tlb_miss_done
+ ldx r14,r14,r15 /* grab pgd entry */
+ beq normal_tlb_miss_done /* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
- ldx r14,r14,r15
+ ldx r14,r14,r15 /* grab pgd entry */
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
#ifndef CONFIG_PPC_64K_PAGES
rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
clrrdi r15,r15,3
-
- cmpldi cr0,r14,0
- beq tlb_miss_fault_bolted
-
- ldx r14,r14,r15
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted /* Bad pgd entry or hugepage; bail */
+ ldx r14,r14,r15 /* grab pud entry */
#endif /* CONFIG_PPC_64K_PAGES */
rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
clrrdi r15,r15,3
-
- cmpldi cr0,r14,0
- beq tlb_miss_fault_bolted
-
- ldx r14,r14,r15
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted
+ ldx r14,r14,r15 /* Grab pmd entry */
rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3
clrrdi r15,r15,3
-
- cmpldi cr0,r14,0
- beq tlb_miss_fault_bolted
-
- ldx r14,r14,r15
+ cmpdi cr0,r14,0
+ bge tlb_miss_fault_bolted
+ ldx r14,r14,r15 /* Grab PTE, normal (!huge) page */
/* Check if required permissions are met */
andc. r15,r11,r14
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 573ba3b69d1..df32a838dcf 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -52,7 +52,7 @@
* indirect page table entries.
*/
#ifdef CONFIG_PPC_BOOK3E_MMU
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
[MMU_PAGE_4K] = {
.shift = 12,
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 153022971da..baae85584b1 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -100,6 +100,16 @@ config XILINX_VIRTEX_GENERIC_BOARD
Most Virtex designs should use this unless it needs to do some
special configuration at board probe time.
+config OBS600
+ bool "OpenBlockS 600"
+ depends on 40x
+ default n
+ select 405EX
+ select PPC40x_SIMPLE
+ help
+ This option enables support for PlatHome OpenBlockS 600 server
+
+
config PPC40x_SIMPLE
bool "Simple PowerPC 40x board support"
depends on 40x
@@ -186,3 +196,14 @@ config IBM405_ERR51
# bool
# depends on !STB03xxx && PPC4xx_DMA
# default y
+#
+
+config APM8018X
+ bool "APM8018X"
+ depends on 40x
+ default n
+ select PPC40x_SIMPLE
+ help
+ This option enables support for the AppliedMicro APM8018X evaluation
+ board.
+
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index e8dd5c5df7d..97612068fae 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -55,7 +55,9 @@ static const char *board[] __initdata = {
"amcc,haleakala",
"amcc,kilauea",
"amcc,makalu",
- "est,hotfoot"
+ "apm,klondike",
+ "est,hotfoot",
+ "plathome,obs600"
};
static int __init ppc40x_probe(void)
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 762322ce24a..5d5aaf6c91a 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -186,6 +186,16 @@ config ISS4xx
help
This option enables support for the IBM ISS simulation environment
+config CURRITUCK
+ bool "IBM Currituck (476fpe) Support"
+ depends on PPC_47x
+ default n
+ select SWIOTLB
+ select 476FPE
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the IBM Currituck (476fpe) evaluation board
+
config ICON
bool "Icon"
depends on 44x
@@ -308,6 +318,10 @@ config 460SX
select IBM_EMAC_ZMII
select IBM_EMAC_TAH
+config 476FPE
+ bool
+ select PPC_FPU
+
config APM821xx
bool
select PPC_FPU
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 553db600721..d03833abec0 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
+obj-$(CONFIG_CURRITUCK) += currituck.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
new file mode 100644
index 00000000000..3f6229b5dee
--- /dev/null
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -0,0 +1,204 @@
+/*
+ * Currituck board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ * Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static __initdata struct of_device_id ppc47x_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,plb6", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+/* The EEPROM is missing and the default values are bogus. This forces USB in
+ * to EHCI mode */
+static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+ if (of_machine_is_compatible("ibm,currituck")) {
+ pci_write_config_dword(dev, 0xe0, 0x0114231f);
+ pci_write_config_dword(dev, 0xe4, 0x00006c40);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+ struct device_node *np;
+
+ /* Find top level interrupt controller */
+ for_each_node_with_property(np, "interrupt-controller") {
+ if (of_get_property(np, "interrupts", NULL) == NULL)
+ break;
+ }
+ if (np == NULL)
+ panic("Can't find top level interrupt controller");
+
+ /* Check type and do appropriate initialization */
+ if (of_device_is_compatible(np, "chrp,open-pic")) {
+ /* The MPIC driver will get everything it needs from the
+ * device-tree, just pass 0 to all arguments
+ */
+ struct mpic *mpic =
+ mpic_alloc(np, 0, 0, 0, 0, " MPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ } else
+ panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
+{
+ mpic_setup_this_cpu();
+}
+
+static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
+{
+ struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+ const u64 *spin_table_addr_prop;
+ u32 *spin_table;
+ extern void start_secondary_47x(void);
+
+ BUG_ON(cpunode == NULL);
+
+ /* Assume spin table. We could test for the enable-method in
+ * the device-tree but currently there's little point as it's
+ * our only supported method
+ */
+ spin_table_addr_prop =
+ of_get_property(cpunode, "cpu-release-addr", NULL);
+
+ if (spin_table_addr_prop == NULL) {
+ pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+ cpu);
+ return 1;
+ }
+
+ /* Assume it's mapped as part of the linear mapping. This is a bit
+ * fishy but will work fine for now
+ *
+ * XXX: Is there any reason to assume differently?
+ */
+ spin_table = (u32 *)__va(*spin_table_addr_prop);
+ pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+ spin_table[3] = cpu;
+ smp_wmb();
+ spin_table[1] = __pa(start_secondary_47x);
+ mb();
+
+ return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .setup_cpu = smp_ppc47x_setup_cpu,
+ .kick_cpu = smp_ppc47x_kick_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+ /* No need to check the DMA config as we /know/ our windows are all of
+ * RAM. Lets hope that doesn't change */
+#ifdef CONFIG_SWIOTLB
+ if (memblock_end_of_DRAM() > 0xffffffff) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+ ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+ return 0;
+
+ return 1;
+}
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+ if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+ dev->device == 0x00e0)) {
+ dev->irq = irq_create_mapping(NULL, 47);
+ pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
+ }
+}
+
+define_machine(ppc47x) {
+ .name = "PowerPC 47x",
+ .probe = ppc47x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = ppc47x_init_irq,
+ .setup_arch = ppc47x_setup_arch,
+ .pci_irq_fixup = ppc47x_pci_irq_fixup,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index 19395f18b1d..5b8cdbb82f8 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -71,7 +71,7 @@ static void __init iss4xx_init_irq(void)
/* The MPIC driver will get everything it needs from the
* device-tree, just pass 0 to all arguments
*/
- struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+ struct mpic *mpic = mpic_alloc(np, 0, 0, 0, 0,
" MPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
index aa0d84d2258..464ea8e0292 100644
--- a/arch/powerpc/platforms/83xx/asp834x.c
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -36,38 +36,7 @@ static void __init asp834x_setup_arch(void)
mpc834x_usb_cfg();
}
-static void __init asp834x_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- of_node_put(np);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
-static struct __initdata of_device_id asp8347_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init asp8347_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, asp8347_ids, NULL);
- return 0;
-}
-machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -82,7 +51,7 @@ define_machine(asp834x) {
.name = "ASP8347E",
.probe = asp834x_probe,
.setup_arch = asp834x_setup_arch,
- .init_IRQ = asp834x_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index c55129f5760..65eb792a0d0 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -51,15 +51,14 @@
*/
static void __init mpc83xx_km_setup_arch(void)
{
+#ifdef CONFIG_QUICC_ENGINE
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("kmpbec83xx_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -122,54 +121,7 @@ static void __init mpc83xx_km_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id kmpbec83xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init kmeter_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, kmpbec83xx_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc83xx_km, kmeter_declare_of_platform_devices);
-
-static void __init mpc83xx_km_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,pq2pro-pic");
- if (!np) {
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
- }
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
/* list of the supported boards */
static char *board[] __initdata = {
@@ -198,7 +150,7 @@ define_machine(mpc83xx_km) {
.name = "mpc83xx-km-platform",
.probe = mpc83xx_km_probe,
.setup_arch = mpc83xx_km_setup_arch,
- .init_IRQ = mpc83xx_km_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index f01806c940e..125336f750c 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -11,10 +11,15 @@
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
#include <asm/io.h>
#include <asm/hw_irq.h>
+#include <asm/ipic.h>
+#include <asm/qe_ic.h>
#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
#include "mpc83xx.h"
@@ -65,3 +70,75 @@ long __init mpc83xx_time_init(void)
return 0;
}
+
+void __init mpc83xx_ipic_init_IRQ(void)
+{
+ struct device_node *np;
+
+ /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
+ np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+ if (!np)
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ of_node_put(np);
+
+ /* Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+}
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc83xx_qe_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+ }
+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+ of_node_put(np);
+}
+
+void __init mpc83xx_ipic_and_qe_init_IRQ(void)
+{
+ mpc83xx_ipic_init_IRQ();
+ mpc83xx_qe_init_IRQ();
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus" },
+ { .compatible = "gianfar" },
+ { .compatible = "gpio-leds", },
+ { .type = "qe", },
+ { .compatible = "fsl,qe", },
+ {},
+};
+
+int __init mpc83xx_declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+void __init mpc83xx_setup_pci(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+ mpc83xx_add_bridge(np);
+ for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
+ mpc83xx_add_bridge(np);
+}
+#endif
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
index d0c4e15b779..4f2d9fea77b 100644
--- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -27,36 +27,13 @@
*/
static void __init mpc830x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc831x_usb_cfg();
}
-static void __init mpc830x_rdb_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
static const char *board[] __initdata = {
"MPC8308RDB",
"fsl,mpc8308rdb",
@@ -72,24 +49,13 @@ static int __init mpc830x_rdb_probe(void)
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus" },
- { .compatible = "gianfar" },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices);
define_machine(mpc830x_rdb) {
.name = "MPC830x RDB",
.probe = mpc830x_rdb_probe,
.setup_arch = mpc830x_rdb_setup_arch,
- .init_IRQ = mpc830x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index f859ead49a8..fa25977c52d 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -28,38 +28,13 @@
*/
static void __init mpc831x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc831x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc831x_usb_cfg();
}
-static void __init mpc831x_rdb_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
static const char *board[] __initdata = {
"MPC8313ERDB",
"fsl,mpc8315erdb",
@@ -74,25 +49,13 @@ static int __init mpc831x_rdb_probe(void)
return of_flat_dt_match(of_get_flat_dt_root(), board);
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus" },
- { .compatible = "gianfar" },
- { .compatible = "gpio-leds", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc831x_rdb, declare_of_platform_devices);
+machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices);
define_machine(mpc831x_rdb) {
.name = "MPC831x RDB",
.probe = mpc831x_rdb_probe,
.setup_arch = mpc831x_rdb_setup_arch,
- .init_IRQ = mpc831x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 32a52896822..e36bc611dd6 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -72,10 +72,7 @@ static void __init mpc832x_sys_setup_arch(void)
of_node_put(np);
}
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -101,51 +98,7 @@ static void __init mpc832x_sys_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc832x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_sys_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -161,7 +114,7 @@ define_machine(mpc832x_mds) {
.name = "MPC832x MDS",
.probe = mpc832x_sys_probe,
.setup_arch = mpc832x_sys_setup_arch,
- .init_IRQ = mpc832x_sys_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 17f99745f0e..eff5baabc3f 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -193,17 +193,14 @@ machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
*/
static void __init mpc832x_rdb_setup_arch(void)
{
-#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE)
+#if defined(CONFIG_QUICC_ENGINE)
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -218,52 +215,7 @@ static void __init mpc832x_rdb_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc832x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc832x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc832x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
-
-static void __init mpc832x_rdb_init_IRQ(void)
-{
-
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
+machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -279,7 +231,7 @@ define_machine(mpc832x_rdb) {
.name = "MPC832x RDB",
.probe = mpc832x_rdb_probe,
.setup_arch = mpc832x_rdb_setup_arch,
- .init_IRQ = mpc832x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 6b45969567d..39849dd1b5b 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -41,13 +41,12 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
{},
};
static int __init mpc834x_itx_declare_of_platform_devices(void)
{
+ mpc83xx_declare_of_platform_devices();
return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL);
}
machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
@@ -59,37 +58,14 @@ machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices);
*/
static void __init mpc834x_itx_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc834x_itx_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc834x_usb_cfg();
}
-static void __init mpc834x_itx_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
@@ -104,7 +80,7 @@ define_machine(mpc834x_itx) {
.name = "MPC834x ITX",
.probe = mpc834x_itx_probe,
.setup_arch = mpc834x_itx_setup_arch,
- .init_IRQ = mpc834x_itx_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 041c5177e73..5828d8e97c3 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -77,51 +77,15 @@ static int mpc834xemds_usb_cfg(void)
*/
static void __init mpc834x_mds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc834xemds_usb_cfg();
}
-static void __init mpc834x_mds_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
-
-static struct of_device_id mpc834x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc834x_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, mpc834x_ids, NULL);
- return 0;
-}
-machine_device_initcall(mpc834x_mds, mpc834x_declare_of_platform_devices);
+machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -137,7 +101,7 @@ define_machine(mpc834x_mds) {
.name = "MPC834x MDS",
.probe = mpc834x_mds_probe,
.setup_arch = mpc834x_mds_setup_arch,
- .init_IRQ = mpc834x_mds_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 934cc8c46bb..ad8e4bcd7d5 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -80,10 +80,7 @@ static void __init mpc836x_mds_setup_arch(void)
of_node_put(np);
}
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
@@ -144,23 +141,7 @@ static void __init mpc836x_mds_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc836x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- {},
-};
-
-static int __init mpc836x_declare_of_platform_devices(void)
-{
- /* Publish the QE devices */
- of_platform_bus_probe(NULL, mpc836x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
+machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
#ifdef CONFIG_QE_USB
static int __init mpc836x_usb_cfg(void)
@@ -226,34 +207,6 @@ err:
machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
#endif /* CONFIG_QE_USB */
-static void __init mpc836x_mds_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif /* CONFIG_QUICC_ENGINE */
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
@@ -268,7 +221,7 @@ define_machine(mpc836x_mds) {
.name = "MPC836x MDS",
.probe = mpc836x_mds_probe,
.setup_arch = mpc836x_mds_setup_arch,
- .init_IRQ = mpc836x_mds_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index b0090aac964..f8769d713d6 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -27,61 +27,19 @@
#include "mpc83xx.h"
-static struct of_device_id __initdata mpc836x_rdk_ids[] = {
- { .compatible = "simple-bus", },
- {},
-};
-
-static int __init mpc836x_rdk_declare_of_platform_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
-}
-machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices);
static void __init mpc836x_rdk_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
#ifdef CONFIG_QUICC_ENGINE
qe_reset();
#endif
}
-static void __init mpc836x_rdk_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /*
- * Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
- of_node_put(np);
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np)
- return;
-
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-#endif
-}
-
/*
* Called very early, MMU is off, device-tree isn't unflattened.
*/
@@ -96,7 +54,7 @@ define_machine(mpc836x_rdk) {
.name = "MPC836x RDK",
.probe = mpc836x_rdk_probe,
.setup_arch = mpc836x_rdk_setup_arch,
- .init_IRQ = mpc836x_rdk_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 83068322abd..e53a60b6c86 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -79,54 +79,14 @@ out:
*/
static void __init mpc837x_mds_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc837x_mds_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc837xmds_usb_cfg();
}
-static struct of_device_id mpc837x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
- /* Publish platform_device */
- of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_mds_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -142,7 +102,7 @@ define_machine(mpc837x_mds) {
.name = "MPC837x MDS",
.probe = mpc837x_mds_probe,
.setup_arch = mpc837x_mds_setup_arch,
- .init_IRQ = mpc837x_mds_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 7bafbf2ec0f..16c9c9cbbb7 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -50,56 +50,15 @@ static void mpc837x_rdb_sd_cfg(void)
*/
static void __init mpc837x_rdb_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("mpc837x_rdb_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
- for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
- mpc83xx_add_bridge(np);
-#endif
+ mpc83xx_setup_pci();
mpc837x_usb_cfg();
mpc837x_rdb_sd_cfg();
}
-static struct of_device_id mpc837x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "gpio-leds", },
- {},
-};
-
-static int __init mpc837x_declare_of_platform_devices(void)
-{
- /* Publish platform_device */
- of_platform_bus_probe(NULL, mpc837x_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc837x_rdb, mpc837x_declare_of_platform_devices);
-
-static void __init mpc837x_rdb_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-}
+machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices);
static const char *board[] __initdata = {
"fsl,mpc8377rdb",
@@ -121,7 +80,7 @@ define_machine(mpc837x_rdb) {
.name = "MPC837x RDB/WLAN",
.probe = mpc837x_rdb_probe,
.setup_arch = mpc837x_rdb_setup_arch,
- .init_IRQ = mpc837x_rdb_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 82a434510d8..0cf74d7ea1c 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -70,5 +70,21 @@ extern long mpc83xx_time_init(void);
extern int mpc837x_usb_cfg(void);
extern int mpc834x_usb_cfg(void);
extern int mpc831x_usb_cfg(void);
+extern void mpc83xx_ipic_init_IRQ(void);
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc83xx_qe_init_IRQ(void);
+extern void mpc83xx_ipic_and_qe_init_IRQ(void);
+#else
+static inline void __init mpc83xx_qe_init_IRQ(void) {}
+#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
+#endif /* CONFIG_QUICC_ENGINE */
+
+#ifdef CONFIG_PCI
+extern void mpc83xx_setup_pci(void);
+#else
+#define mpc83xx_setup_pci() do {} while (0)
+#endif
+
+extern int mpc83xx_declare_of_platform_devices(void);
#endif /* __MPC83XX_H__ */
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index af41d8c810a..8a81d7640b1 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -48,52 +48,13 @@
*/
static void __init sbc834x_setup_arch(void)
{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
if (ppc_md.progress)
ppc_md.progress("sbc834x_setup_arch()", 0);
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
- mpc83xx_add_bridge(np);
-#endif
-
+ mpc83xx_setup_pci();
}
-static void __init sbc834x_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "ipic");
- if (!np)
- return;
-
- ipic_init(np, 0);
-
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- ipic_set_default_priority();
-
- of_node_put(np);
-}
-
-static struct __initdata of_device_id sbc834x_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init sbc834x_declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, sbc834x_ids, NULL);
- return 0;
-}
-machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices);
+machine_device_initcall(sbc834x, mpc83xx_declare_of_platform_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
@@ -102,14 +63,14 @@ static int __init sbc834x_probe(void)
{
unsigned long root = of_get_flat_dt_root();
- return of_flat_dt_is_compatible(root, "SBC834x");
+ return of_flat_dt_is_compatible(root, "SBC834xE");
}
define_machine(sbc834x) {
- .name = "SBC834x",
+ .name = "SBC834xE",
.probe = sbc834x_probe,
.setup_arch = sbc834x_setup_arch,
- .init_IRQ = sbc834x_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index bc5acb95917..9cb2d4320dc 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,6 +3,8 @@
#
obj-$(CONFIG_SMP) += smp.o
+obj-y += common.o
+
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
new file mode 100644
index 00000000000..9fef5302adc
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -0,0 +1,66 @@
+/*
+ * Routines common to most mpc85xx-based boards.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/of_platform.h>
+
+#include <sysdev/cpm2_pic.h>
+
+#include "mpc85xx.h"
+
+static struct of_device_id __initdata mpc85xx_common_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .compatible = "simple-bus", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ { .compatible = "gianfar", },
+ { .compatible = "fsl,qe", },
+ { .compatible = "fsl,cpm2", },
+ { .compatible = "fsl,srio", },
+ {},
+};
+
+int __init mpc85xx_common_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, mpc85xx_common_ids, NULL);
+}
+#ifdef CONFIG_CPM2
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ int cascade_irq;
+
+ while ((cascade_irq = cpm2_get_irq()) >= 0)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+
+void __init mpc85xx_cpm2_pic_init(void)
+{
+ struct device_node *np;
+ int irq;
+
+ /* Setup CPM2 PIC */
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
+ }
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ of_node_put(np);
+ printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
+ return;
+ }
+
+ cpm2_pic_init(np);
+ of_node_put(np);
+ irq_set_chained_handler(irq, cpm2_cascade);
+}
+#endif
diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c
index 802ad110b75..07e3e6c4737 100644
--- a/arch/powerpc/platforms/85xx/corenet_ds.c
+++ b/arch/powerpc/platforms/85xx/corenet_ds.c
@@ -31,32 +31,18 @@
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
void __init corenet_ds_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
- unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+ unsigned int flags = MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
- np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
if (ppc_md.get_irq == mpic_get_coreint_irq)
flags |= MPIC_ENABLE_COREINT;
- mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC ");
+ mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
@@ -65,10 +51,6 @@ void __init corenet_ds_pic_init(void)
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
void __init corenet_ds_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -77,9 +59,7 @@ void __init corenet_ds_setup_arch(void)
#endif
dma_addr_t max = 0xffffffff;
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
@@ -112,7 +92,7 @@ static const struct of_device_id of_device_ids[] __devinitconst = {
.compatible = "simple-bus"
},
{
- .compatible = "fsl,rapidio-delta",
+ .compatible = "fsl,srio",
},
{
.compatible = "fsl,p4080-pcie",
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index c46f9359be1..20f75d7819c 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -35,6 +35,7 @@
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
+#include "mpc85xx.h"
#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */
#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */
@@ -54,60 +55,15 @@ static void machine_restart(char *cmd)
for (;;);
}
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
static void __init ksi8560_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(NULL, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
#ifdef CONFIG_CPM2
@@ -215,22 +171,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .type = "soc", },
- { .type = "simple-bus", },
- { .name = "cpm", },
- { .name = "localbus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(ksi8560, declare_of_platform_devices);
+machine_device_initcall(ksi8560, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index f79f2f10214..cf266826682 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -32,31 +32,15 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
void __init mpc8536_ds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -104,19 +88,7 @@ static void __init mpc8536_ds_setup_arch(void)
printk("MPC8536 DS board from Freescale Semiconductor\n");
}
-static struct of_device_id __initdata mpc8536_ds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc8536_ds_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
-}
-machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+machine_device_initcall(mpc8536_ds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8536_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
new file mode 100644
index 00000000000..2aa7c5dc2c7
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -0,0 +1,11 @@
+#ifndef MPC85xx_H
+#define MPC85xx_H
+extern int mpc85xx_common_publish_devices(void);
+
+#ifdef CONFIG_CPM2
+extern void mpc85xx_cpm2_pic_init(void);
+#else
+static inline void __init mpc85xx_cpm2_pic_init(void) {}
+#endif /* CONFIG_CPM2 */
+
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3b2c9bb6619..3bebb5173bf 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -35,6 +35,8 @@
#include <sysdev/cpm2_pic.h>
#endif
+#include "mpc85xx.h"
+
#ifdef CONFIG_PCI
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
@@ -46,63 +48,15 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
}
#endif /* CONFIG_PCI */
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
static void __init mpc85xx_ads_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(np, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -221,23 +175,7 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .type = "soc", },
- { .name = "cpm", },
- { .name = "localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(mpc85xx_ads, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_ads, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 66cb8d64079..40f03da616a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -46,6 +46,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
/* CADMUS info */
/* xxx - galak, move into device tree */
#define CADMUS_BASE (0xf8004000)
@@ -177,7 +179,7 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
static struct irqaction mpc85xxcds_8259_irqaction = {
.handler = mpc85xx_8259_cascade_action,
- .flags = IRQF_SHARED,
+ .flags = IRQF_SHARED | IRQF_NO_THREAD,
.name = "8259 cascade",
};
#endif /* PPC_I8259 */
@@ -186,30 +188,10 @@ static struct irqaction mpc85xxcds_8259_irqaction = {
static void __init mpc85xx_cds_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
-
- /* Return the mpic node */
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -330,19 +312,7 @@ static int __init mpc85xx_cds_probe(void)
return of_flat_dt_is_compatible(root, "MPC85xxCDS");
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- return of_platform_bus_probe(NULL, of_bus_ids, NULL);
-}
-machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+machine_device_initcall(mpc85xx_cds, mpc85xx_common_publish_devices);
define_machine(mpc85xx_cds) {
.name = "MPC85xx CDS",
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 1b9a8cf1873..eefbb91e1d6 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -35,6 +35,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#undef DEBUG
@@ -60,43 +63,27 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
void __init mpc85xx_ds_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np;
#ifdef CONFIG_PPC_I8259
+ struct device_node *np;
struct device_node *cascade_node = NULL;
int cascade_irq;
#endif
unsigned long root = of_get_flat_dt_root();
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY |
+ mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
} else {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
}
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
#ifdef CONFIG_PPC_I8259
@@ -152,9 +139,6 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
static void __init mpc85xx_ds_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -187,9 +171,7 @@ static void __init mpc85xx_ds_setup_arch(void)
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
@@ -219,21 +201,9 @@ static int __init mpc8544_ds_probe(void)
return 0;
}
-static struct of_device_id __initdata mpc85xxds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc85xxds_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
-}
-machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
-machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
-machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xx_common_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8544_ds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8572_ds, swiotlb_setup_bus_notifier);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a23a3ff634c..1d15a0cd2c8 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -51,6 +51,9 @@
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#undef DEBUG
#ifdef DEBUG
@@ -153,30 +156,7 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
* Setup the architecture
*
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
-
#ifdef CONFIG_QUICC_ENGINE
-static struct of_device_id mpc85xx_qe_ids[] __initdata = {
- { .type = "qe", },
- { .compatible = "fsl,qe", },
- { },
-};
-
-static void __init mpc85xx_publish_qe_devices(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!of_device_is_available(np)) {
- of_node_put(np);
- return;
- }
-
- of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
-}
-
static void __init mpc85xx_mds_reset_ucc_phys(void)
{
struct device_node *np;
@@ -347,7 +327,6 @@ static void __init mpc85xx_mds_qeic_init(void)
of_node_put(np);
}
#else
-static void __init mpc85xx_publish_qe_devices(void) { }
static void __init mpc85xx_mds_qe_init(void) { }
static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
@@ -381,9 +360,7 @@ static void __init mpc85xx_mds_setup_arch(void)
}
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
mpc85xx_mds_qe_init();
@@ -429,24 +406,11 @@ machine_arch_initcall(mpc8568_mds, board_fixups);
machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- { .compatible = "fsl,rapidio-delta", },
{ .compatible = "fsl,mpc8548-guts", },
{ .compatible = "gpio-leds", },
{},
};
-static struct of_device_id p1021_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
@@ -454,23 +418,15 @@ static int __init mpc85xx_publish_devices(void)
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
+ mpc85xx_common_publish_devices();
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
- mpc85xx_publish_qe_devices();
-
- return 0;
-}
-
-static int __init p1021_publish_devices(void)
-{
- of_platform_bus_probe(NULL, p1021_ids, NULL);
- mpc85xx_publish_qe_devices();
return 0;
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
-machine_device_initcall(p1021_mds, p1021_publish_devices);
+machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
@@ -478,26 +434,11 @@ machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
static void __init mpc85xx_mds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np)
- return;
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
mpic_init(mpic);
mpc85xx_mds_qeic_init();
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index f5ff9110c97..ccf520e890b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -29,6 +29,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#undef DEBUG
@@ -42,49 +45,28 @@
void __init mpc85xx_rdb_pic_init(void)
{
struct mpic *mpic;
- struct resource r;
- struct device_node *np;
unsigned long root = of_get_flat_dt_root();
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY |
+ mpic = mpic_alloc(NULL, 0,
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
} else {
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
}
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-
}
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
static void __init mpc85xx_rdb_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -102,27 +84,12 @@ static void __init mpc85xx_rdb_setup_arch(void)
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
-
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
}
-static struct of_device_id __initdata mpc85xxrdb_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init mpc85xxrdb_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
-}
-machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
-machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c
index d7387fa7f53..538bc3f57e9 100644
--- a/arch/powerpc/platforms/85xx/p1010rdb.c
+++ b/arch/powerpc/platforms/85xx/p1010rdb.c
@@ -28,33 +28,18 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
void __init p1010_rdb_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
mpic_init(mpic);
-
}
@@ -81,18 +66,7 @@ static void __init p1010_rdb_setup_arch(void)
printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
}
-static struct of_device_id __initdata p1010rdb_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- {},
-};
-
-static int __init p1010rdb_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, p1010rdb_ids, NULL);
-}
-machine_device_initcall(p1010_rdb, p1010rdb_publish_devices);
+machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);
/*
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index fda15716fad..bb3d84f4046 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -26,6 +26,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/fsl_guts.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
@@ -238,38 +241,15 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
void __init p1022_ds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- pr_err("Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- pr_err("Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
-
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
/*
* Setup the architecture
*/
@@ -309,9 +289,7 @@ static void __init p1022_ds_setup_arch(void)
diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
@@ -325,10 +303,6 @@ static void __init p1022_ds_setup_arch(void)
}
static struct of_device_id __initdata p1022_ds_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
/* So that the DMA channel nodes can be probed individually: */
{ .compatible = "fsl,eloplus-dma", },
{},
@@ -336,6 +310,7 @@ static struct of_device_id __initdata p1022_ds_ids[] = {
static int __init p1022_ds_publish_devices(void)
{
+ mpc85xx_common_publish_devices();
return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
}
machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c
index 835e0b335bf..d951e7027bb 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rds.c
@@ -30,19 +30,18 @@
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include "smp.h"
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
/* ************************************************************************
*
* Setup the architecture
*
*/
-#ifdef CONFIG_SMP
-void __init mpc85xx_smp_init(void);
-#endif
-
static void __init mpc85xx_rds_setup_arch(void)
{
struct device_node *np;
@@ -87,53 +86,19 @@ static void __init mpc85xx_rds_setup_arch(void)
fsl_add_bridge(np, 0);
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
-}
-
-static struct of_device_id p1023_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- {},
-};
-
-
-static int __init p1023_publish_devices(void)
-{
- of_platform_bus_probe(NULL, p1023_ids, NULL);
-
- return 0;
}
-machine_device_initcall(p1023_rds, p1023_publish_devices);
+machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices);
static void __init mpc85xx_rds_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 14632a97122..184a5078461 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -48,35 +48,16 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
static int sbc_rev;
static void __init sbc8548_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-
- np = of_find_node_by_type(np, "open-pic");
-
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
-
- /* Return the mpic node */
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -149,21 +130,7 @@ static void sbc8548_show_cpuinfo(struct seq_file *m)
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .type = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(sbc8548, declare_of_platform_devices);
+machine_device_initcall(sbc8548, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cebd786dc33..940752e9305 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -32,68 +32,22 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
#endif
-#ifdef CONFIG_CPM2
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* CONFIG_CPM2 */
-
static void __init sbc8560_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np = NULL;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(np, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -208,23 +162,7 @@ static void sbc8560_show_cpuinfo(struct seq_file *m)
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .name = "soc", },
- { .type = "soc", },
- { .name = "cpm", },
- { .name = "localbus", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(sbc8560, declare_of_platform_devices);
+machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 2df4785ffd4..ff4249044a3 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
+#include "smp.h"
extern void __early_start(void);
diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h
new file mode 100644
index 00000000000..e2b44933ff1
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/smp.h
@@ -0,0 +1,15 @@
+#ifndef POWERPC_85XX_SMP_H_
+#define POWERPC_85XX_SMP_H_ 1
+
+#include <linux/init.h>
+
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#else
+static inline void mpc85xx_smp_init(void)
+{
+ /* Nothing to do */
+}
+#endif
+
+#endif /* not POWERPC_85XX_SMP_H_ */
diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index 747d8fb3ab8..18f635906b2 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -41,32 +41,17 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
#include "socrates_fpga_pic.h"
static void __init socrates_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
struct device_node *np;
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
@@ -96,17 +81,7 @@ static void __init socrates_setup_arch(void)
#endif
}
-static struct of_device_id __initdata socrates_of_bus_ids[] = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init socrates_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
-}
-machine_device_initcall(socrates, socrates_publish_devices);
+machine_device_initcall(socrates, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c
index 5387e9f06bd..e9e5234b4e7 100644
--- a/arch/powerpc/platforms/85xx/stx_gp3.c
+++ b/arch/powerpc/platforms/85xx/stx_gp3.c
@@ -40,70 +40,21 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
#endif /* CONFIG_CPM2 */
static void __init stx_gp3_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- if (irq == NO_IRQ) {
- of_node_put(np);
- printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
- return;
- }
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -144,19 +95,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(stx_gp3, declare_of_platform_devices);
+machine_device_initcall(stx_gp3, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 325de772725..bf7c89fb75b 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -38,70 +38,21 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "mpc85xx.h"
+
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-
-static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- int cascade_irq;
-
- while ((cascade_irq = cpm2_get_irq()) >= 0)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
#endif /* CONFIG_CPM2 */
static void __init tqm85xx_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-#ifdef CONFIG_CPM2
- int irq;
-#endif
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (!np) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Could not map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
- if (np == NULL) {
- printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
- return;
- }
- irq = irq_of_parse_and_map(np, 0);
-
- if (irq == NO_IRQ) {
- of_node_put(np);
- printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
- return;
- }
-
- cpm2_pic_init(np);
- of_node_put(np);
- irq_set_chained_handler(irq, cpm2_cascade);
-#endif
+ mpc85xx_cpm2_pic_init();
}
/*
@@ -173,19 +124,7 @@ static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
tqm85xx_ti1520_fixup);
-static struct of_device_id __initdata of_bus_ids[] = {
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init declare_of_platform_devices(void)
-{
- of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
- return 0;
-}
-machine_device_initcall(tqm85xx, declare_of_platform_devices);
+machine_device_initcall(tqm85xx, mpc85xx_common_publish_devices);
static const char *board[] __initdata = {
"tqc,tqm8540",
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index a9dc5e79512..3a69f8b77de 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,6 +32,9 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
/* A few bit definitions needed for fixups on some boards */
#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */
@@ -40,29 +43,11 @@
void __init xes_mpc85xx_pic_init(void)
{
- struct mpic *mpic;
- struct resource r;
- struct device_node *np;
-
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL) {
- printk(KERN_ERR "Could not find open-pic node\n");
- return;
- }
-
- if (of_address_to_resource(np, 0, &r)) {
- printk(KERN_ERR "Failed to map mpic register space\n");
- of_node_put(np);
- return;
- }
-
- mpic = mpic_alloc(np, r.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
- of_node_put(np);
-
mpic_init(mpic);
}
@@ -136,9 +121,6 @@ static int primary_phb_addr;
/*
* Setup the architecture
*/
-#ifdef CONFIG_SMP
-extern void __init mpc85xx_smp_init(void);
-#endif
static void __init xes_mpc85xx_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -172,26 +154,12 @@ static void __init xes_mpc85xx_setup_arch(void)
}
#endif
-#ifdef CONFIG_SMP
mpc85xx_smp_init();
-#endif
}
-static struct of_device_id __initdata xes_mpc85xx_ids[] = {
- { .type = "soc", },
- { .compatible = "soc", },
- { .compatible = "simple-bus", },
- { .compatible = "gianfar", },
- {},
-};
-
-static int __init xes_mpc85xx_publish_devices(void)
-{
- return of_platform_bus_probe(NULL, xes_mpc85xx_ids, NULL);
-}
-machine_device_initcall(xes_mpc8572, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8548, xes_mpc85xx_publish_devices);
-machine_device_initcall(xes_mpc8540, xes_mpc85xx_publish_devices);
+machine_device_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_device_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index b11c3535f35..569262ca499 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -161,7 +161,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", },
- { .compatible = "fsl,rapidio-delta", },
+ { .compatible = "fsl,srio", },
{ .compatible = "gianfar", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
index 8ef8960abda..52bbfa03153 100644
--- a/arch/powerpc/platforms/86xx/pic.c
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -31,26 +31,16 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
void __init mpc86xx_init_irq(void)
{
- struct mpic *mpic;
- struct device_node *np;
- struct resource res;
#ifdef CONFIG_PPC_I8259
+ struct device_node *np;
struct device_node *cascade_node = NULL;
int cascade_irq;
#endif
- /* Determine PIC address. */
- np = of_find_node_by_type(NULL, "open-pic");
- if (np == NULL)
- return;
- of_address_to_resource(np, 0, &res);
-
- mpic = mpic_alloc(np, res.start,
- MPIC_PRIMARY | MPIC_WANTS_RESET |
- MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
- MPIC_SINGLE_DEST_CPU,
+ struct mpic *mpic = mpic_alloc(NULL, 0,
+ MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " MPIC ");
- of_node_put(np);
BUG_ON(mpic == NULL);
mpic_init(mpic);
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 3fe6d927ad7..31e1adeaa92 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -211,6 +211,12 @@ config PPC_PASEMI_CPUFREQ
endmenu
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
depends on 6xx && (PPC_PREP || PPC_PMAC)
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index fbecae0fbb4..425db18580a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -174,7 +174,6 @@ config BOOKE
config FSL_BOOKE
bool
depends on (E200 || E500) && PPC32
- select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT
default y
# this is for common code between PPC32 & PPC64 FSL BOOKE
@@ -182,6 +181,7 @@ config PPC_FSL_BOOK3E
bool
select FSL_EMB_PERFMON
select PPC_SMP_MUXED_IPI
+ select SYS_SUPPORTS_HUGETLBFS if PHYS_64BIT || PPC64
default y if FSL_BOOKE
config PTE_64BIT
@@ -236,7 +236,7 @@ config VSX
config PPC_ICSWX
bool "Support for PowerPC icswx coprocessor instruction"
- depends on POWER4
+ depends on POWER4 || PPC_A2
default n
---help---
@@ -252,6 +252,25 @@ config PPC_ICSWX
If in doubt, say N here.
+config PPC_ICSWX_PID
+ bool "icswx requires direct PID management"
+ depends on PPC_ICSWX && POWER4
+ default y
+ ---help---
+ The PID register in server is used explicitly for ICSWX. In
+ embedded systems PID managment is done by the system.
+
+config PPC_ICSWX_USE_SIGILL
+ bool "Should a bad CT cause a SIGILL?"
+ depends on PPC_ICSWX
+ default n
+ ---help---
+ Should a bad CT used for "non-record form ICSWX" cause an
+ illegal intruction signal or should it be silent as
+ architected.
+
+ If in doubt, say N here.
+
config SPE
bool "SPE Support"
depends on E200 || (E500 && !PPC_E500MC)
@@ -290,7 +309,7 @@ config PPC_BOOK3E_MMU
config PPC_MM_SLICES
bool
- default y if (PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
+ default y if (!PPC_FSL_BOOK3E && PPC64 && HUGETLB_PAGE) || (PPC_STD_MMU_64 && PPC_64K_PAGES)
default n
config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 592c3d51b81..ae9fc7bc17d 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1037,6 +1037,8 @@ static int __init cell_iommu_fixed_mapping_init(void)
/* The fixed mapping is only supported on axon machines */
np = of_find_node_by_name(NULL, "axon");
+ of_node_put(np);
+
if (!np) {
pr_debug("iommu: fixed mapping disabled, no axons found\n");
return -1;
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 0fc9b725612..62002a7edfe 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -184,24 +184,10 @@ static int __init cell_publish_devices(void)
}
machine_subsys_initcall(cell, cell_publish_devices);
-static void cell_mpic_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct mpic *mpic = irq_desc_get_handler_data(desc);
- unsigned int virq;
-
- virq = mpic_get_one_irq(mpic);
- if (virq != NO_IRQ)
- generic_handle_irq(virq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
static void __init mpic_init_IRQ(void)
{
struct device_node *dn;
struct mpic *mpic;
- unsigned int virq;
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
@@ -211,19 +197,10 @@ static void __init mpic_init_IRQ(void)
/* The MPIC driver will get everything it needs from the
* device-tree, just pass 0 to all arguments
*/
- mpic = mpic_alloc(dn, 0, 0, 0, 0, " MPIC ");
+ mpic = mpic_alloc(dn, 0, MPIC_SECONDARY, 0, 0, " MPIC ");
if (mpic == NULL)
continue;
mpic_init(mpic);
-
- virq = irq_of_parse_and_map(dn, 0);
- if (virq == NO_IRQ)
- continue;
-
- printk(KERN_INFO "%s : hooking up to IRQ %d\n",
- dn->full_name, virq);
- irq_set_handler_data(virq, mpic);
- irq_set_chained_handler(virq, cell_mpic_cascade);
}
}
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 12278649841..f1f17bb2c33 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -435,8 +435,7 @@ static void __init chrp_find_openpic(void)
if (len > 1)
isu_size = iranges[3];
- chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
- isu_size, 0, " MPIC ");
+ chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC ");
if (chrp_mpic == NULL) {
printk(KERN_ERR "Failed to allocate MPIC structure\n");
goto bail;
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
index 2e9bcf6444c..9cfcf20c056 100644
--- a/arch/powerpc/platforms/embedded6xx/holly.c
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -148,30 +148,14 @@ static void __init holly_setup_arch(void)
static void __init holly_init_IRQ(void)
{
struct mpic *mpic;
- phys_addr_t mpic_paddr = 0;
- struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
- tsi_pic = of_find_node_by_type(NULL, "open-pic");
- if (tsi_pic) {
- unsigned int size;
- const void *prop = of_get_property(tsi_pic, "reg", &size);
- mpic_paddr = of_translate_address(tsi_pic, prop);
- }
-
- if (mpic_paddr == 0) {
- printk(KERN_ERR "%s: No tsi108 PIC found !\n", __func__);
- return;
- }
-
- pr_debug("%s: tsi108 pic phys_addr = 0x%x\n", __func__, (u32) mpic_paddr);
-
- mpic = mpic_alloc(tsi_pic, mpic_paddr,
- MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
NR_IRQS-4, /* num_sources used */
@@ -179,7 +163,7 @@ static void __init holly_init_IRQ(void)
BUG_ON(mpic == NULL);
- mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
@@ -204,7 +188,6 @@ static void __init holly_init_IRQ(void)
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
- of_node_put(tsi_pic);
}
void holly_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 244f997de79..bcfad92c9ce 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -81,29 +81,19 @@ static void __init linkstation_setup_arch(void)
static void __init linkstation_init_IRQ(void)
{
struct mpic *mpic;
- struct device_node *dnp;
- const u32 *prop;
- int size;
- phys_addr_t paddr;
- dnp = of_find_node_by_type(NULL, "open-pic");
- if (dnp == NULL)
- return;
-
- prop = of_get_property(dnp, "reg", &size);
- paddr = (phys_addr_t)of_translate_address(dnp, prop);
-
- mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC ");
+ mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+ 4, 32, " EPIC ");
BUG_ON(mpic == NULL);
/* PCI IRQs */
- mpic_assign_isu(mpic, 0, paddr + 0x10200);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
/* I2C */
- mpic_assign_isu(mpic, 1, paddr + 0x11000);
+ mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
/* ttyS0, ttyS1 */
- mpic_assign_isu(mpic, 2, paddr + 0x11100);
+ mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index f8f33e16c6b..f3350d786f5 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -102,31 +102,14 @@ static void __init mpc7448_hpc2_setup_arch(void)
static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
- phys_addr_t mpic_paddr = 0;
- struct device_node *tsi_pic;
#ifdef CONFIG_PCI
unsigned int cascade_pci_irq;
struct device_node *tsi_pci;
struct device_node *cascade_node = NULL;
#endif
- tsi_pic = of_find_node_by_type(NULL, "open-pic");
- if (tsi_pic) {
- unsigned int size;
- const void *prop = of_get_property(tsi_pic, "reg", &size);
- mpic_paddr = of_translate_address(tsi_pic, prop);
- }
-
- if (mpic_paddr == 0) {
- printk("%s: No tsi108 PIC found !\n", __func__);
- return;
- }
-
- DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
- (u32) mpic_paddr);
-
- mpic = mpic_alloc(tsi_pic, mpic_paddr,
- MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
24,
NR_IRQS-4, /* num_sources used */
@@ -134,7 +117,7 @@ static void __init mpc7448_hpc2_init_IRQ(void)
BUG_ON(mpic == NULL);
- mpic_assign_isu(mpic, 0, mpic_paddr + 0x100);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
mpic_init(mpic);
@@ -159,7 +142,6 @@ static void __init mpc7448_hpc2_init_IRQ(void)
#endif
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
- of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index f1eebcae9bf..afa63883496 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -83,35 +83,17 @@ static void __init storcenter_setup_arch(void)
static void __init storcenter_init_IRQ(void)
{
struct mpic *mpic;
- struct device_node *dnp;
- const void *prop;
- int size;
- phys_addr_t paddr;
-
- dnp = of_find_node_by_type(NULL, "open-pic");
- if (dnp == NULL)
- return;
-
- prop = of_get_property(dnp, "reg", &size);
- if (prop == NULL) {
- of_node_put(dnp);
- return;
- }
-
- paddr = (phys_addr_t)of_translate_address(dnp, prop);
- mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET,
- 16, 32, " OpenPIC ");
-
- of_node_put(dnp);
+ mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET,
+ 16, 32, " OpenPIC ");
BUG_ON(mpic == NULL);
/*
* 16 Serial Interrupts followed by 16 Internal Interrupts.
* I2C is the second internal, so it is at 17, 0x11020.
*/
- mpic_assign_isu(mpic, 0, paddr + 0x10200);
- mpic_assign_isu(mpic, 1, paddr + 0x11000);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+ mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
mpic_init(mpic);
}
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index dd2e48b2850..401e3f3f74c 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -207,6 +207,54 @@ static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
}
+static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
+ int len, u32 *val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr;
+ addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_be16(addr);
+ break;
+ default:
+ *val = in_be32(addr);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
+ int len, u32 val)
+{
+ volatile void __iomem *addr;
+
+ addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
+
+ if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
+ return PCIBIOS_SUCCESSFUL;
+
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_be16(addr, val);
+ break;
+ default:
+ out_be32(addr, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
@@ -217,6 +265,9 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_read_config(hose, offset, len, val);
+
if (offset > 0xff)
return PCIBIOS_BAD_REGISTER_NUMBER;
@@ -252,6 +303,9 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
+ if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
+ return u3_ht_root_write_config(hose, offset, len, val);
+
if (offset > 0xff)
return PCIBIOS_BAD_REGISTER_NUMBER;
@@ -428,6 +482,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
* reg_property and using some accessor functions instead
*/
hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+ hose->cfg_addr = ioremap(0xf8070000, 0x1000);
hose->first_busno = 0;
hose->last_busno = 0xef;
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 4c372047c94..0bcbfe7b2c5 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -221,7 +221,7 @@ static void __init maple_init_IRQ(void)
unsigned long openpic_addr = 0;
int naddr, n, i, opplen, has_isus = 0;
struct mpic *mpic;
- unsigned int flags = MPIC_PRIMARY;
+ unsigned int flags = 0;
/* Locate MPIC in the device-tree. Note that there is a bug
* in Maple device-tree where the type of the controller is
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 6f355821055..98b7a7c1317 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -224,7 +224,7 @@ static __init void pas_init_IRQ(void)
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
- mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
+ mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS;
nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
if (nmiprop)
@@ -234,7 +234,7 @@ static __init void pas_init_IRQ(void)
mpic_flags, 0, 0, "PASEMI-OPIC");
BUG_ON(!mpic);
- mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
+ mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000);
mpic_init(mpic);
/* The NMI/MCK source needs to be prio 15 */
if (nmiprop) {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 901bfbddc3d..7761aabfc29 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -52,13 +52,8 @@ struct device_node *of_irq_dflt_pic;
/* Default addresses */
static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
-#define GC_LEVEL_MASK 0x3ff00000
-#define OHARE_LEVEL_MASK 0x1ff00000
-#define HEATHROW_LEVEL_MASK 0x1ff00000
-
static int max_irqs;
static int max_real_irqs;
-static u32 level_mask[4];
static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
@@ -217,8 +212,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id)
for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
int i = irq >> 5;
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
- /* We must read level interrupts from the level register */
- bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits |= in_le32(&pmac_irq_hw[i]->level);
bits &= ppc_cached_irq_mask[i];
if (bits == 0)
continue;
@@ -248,8 +242,7 @@ static unsigned int pmac_pic_get_irq(void)
for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
int i = irq >> 5;
bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
- /* We must read level interrupts from the level register */
- bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits |= in_le32(&pmac_irq_hw[i]->level);
bits &= ppc_cached_irq_mask[i];
if (bits == 0)
continue;
@@ -284,19 +277,14 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node)
static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- int level;
-
if (hw >= max_irqs)
return -EINVAL;
/* Mark level interrupts, set delayed disable for edge ones and set
* handlers
*/
- level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f)));
- if (level)
- irq_set_status_flags(virq, IRQ_LEVEL);
- irq_set_chip_and_handler(virq, &pmac_pic,
- level ? handle_level_irq : handle_edge_irq);
+ irq_set_status_flags(virq, IRQ_LEVEL);
+ irq_set_chip_and_handler(virq, &pmac_pic, handle_level_irq);
return 0;
}
@@ -334,21 +322,14 @@ static void __init pmac_pic_probe_oldstyle(void)
if ((master = of_find_node_by_name(NULL, "gc")) != NULL) {
max_irqs = max_real_irqs = 32;
- level_mask[0] = GC_LEVEL_MASK;
} else if ((master = of_find_node_by_name(NULL, "ohare")) != NULL) {
max_irqs = max_real_irqs = 32;
- level_mask[0] = OHARE_LEVEL_MASK;
-
/* We might have a second cascaded ohare */
slave = of_find_node_by_name(NULL, "pci106b,7");
- if (slave) {
+ if (slave)
max_irqs = 64;
- level_mask[1] = OHARE_LEVEL_MASK;
- }
} else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) {
max_irqs = max_real_irqs = 64;
- level_mask[0] = HEATHROW_LEVEL_MASK;
- level_mask[1] = 0;
/* We might have a second cascaded heathrow */
slave = of_find_node_by_name(master, "mac-io");
@@ -363,11 +344,8 @@ static void __init pmac_pic_probe_oldstyle(void)
}
/* We found a slave */
- if (slave) {
+ if (slave)
max_irqs = 128;
- level_mask[2] = HEATHROW_LEVEL_MASK;
- level_mask[3] = 0;
- }
}
BUG_ON(master == NULL);
@@ -464,18 +442,6 @@ int of_irq_map_oldworld(struct device_node *device, int index,
}
#endif /* CONFIG_PPC32 */
-static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct mpic *mpic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = mpic_get_one_irq(mpic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
{
#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
@@ -498,14 +464,8 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
int master)
{
const char *name = master ? " MPIC 1 " : " MPIC 2 ";
- struct resource r;
struct mpic *mpic;
- unsigned int flags = master ? MPIC_PRIMARY : 0;
- int rc;
-
- rc = of_address_to_resource(np, 0, &r);
- if (rc)
- return NULL;
+ unsigned int flags = master ? 0 : MPIC_SECONDARY;
pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
@@ -519,7 +479,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
if (master && (flags & MPIC_BIG_ENDIAN))
flags |= MPIC_U3_HT_IRQS;
- mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
+ mpic = mpic_alloc(np, 0, flags, 0, 0, name);
if (mpic == NULL)
return NULL;
@@ -532,7 +492,6 @@ static int __init pmac_pic_probe_mpic(void)
{
struct mpic *mpic1, *mpic2;
struct device_node *np, *master = NULL, *slave = NULL;
- unsigned int cascade;
/* We can have up to 2 MPICs cascaded */
for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
@@ -568,27 +527,14 @@ static int __init pmac_pic_probe_mpic(void)
of_node_put(master);
- /* No slave, let's go out */
- if (slave == NULL)
- return 0;
-
- /* Get/Map slave interrupt */
- cascade = irq_of_parse_and_map(slave, 0);
- if (cascade == NO_IRQ) {
- printk(KERN_ERR "Failed to map cascade IRQ\n");
- return 0;
- }
-
- mpic2 = pmac_setup_one_mpic(slave, 0);
- if (mpic2 == NULL) {
- printk(KERN_ERR "Failed to setup slave MPIC\n");
+ /* Set up a cascaded controller, if present */
+ if (slave) {
+ mpic2 = pmac_setup_one_mpic(slave, 0);
+ if (mpic2 == NULL)
+ printk(KERN_ERR "Failed to setup slave MPIC\n");
of_node_put(slave);
- return 0;
}
- irq_set_handler_data(cascade, mpic2);
- irq_set_chained_handler(cascade, pmac_u3_cascade);
- of_node_put(slave);
return 0;
}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 96580b189ec..970ea1de429 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -494,11 +494,15 @@ static int __init pmac_declare_of_platform_devices(void)
return -1;
np = of_find_node_by_name(NULL, "valkyrie");
- if (np)
+ if (np) {
of_platform_device_create(np, "valkyrie", NULL);
+ of_node_put(np);
+ }
np = of_find_node_by_name(NULL, "platinum");
- if (np)
+ if (np) {
of_platform_device_create(np, "platinum", NULL);
+ of_node_put(np);
+ }
np = of_find_node_by_type(NULL, "smu");
if (np) {
of_platform_device_create(np, "smu", NULL);
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 9b6a820bdd7..44d769258eb 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void)
if (psurge_secondary_virq)
rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
- IRQF_PERCPU, "IPI", NULL);
+ IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL);
if (rc)
pr_err("Failed to setup secondary cpu IPI\n");
@@ -408,13 +408,13 @@ static int __init smp_psurge_kick_cpu(int nr)
static struct irqaction psurge_irqaction = {
.handler = psurge_ipi_intr,
- .flags = IRQF_PERCPU,
+ .flags = IRQF_PERCPU | IRQF_NO_THREAD,
.name = "primary IPI",
};
static void __init smp_psurge_setup_cpu(int cpu_nr)
{
- if (cpu_nr != 0)
+ if (cpu_nr != 0 || !psurge_start)
return;
/* reset the entry point so if we get another intr we won't
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 31853008b41..bcc3cb48a44 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,4 +2,4 @@ obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o
obj-y += opal-rtc.o opal-nvram.o
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o
+obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 4a3f46d8533..3bb07e5e43c 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -99,3 +99,11 @@ OPAL_CALL(opal_write_oppanel, OPAL_WRITE_OPPANEL);
OPAL_CALL(opal_pci_map_pe_dma_window, OPAL_PCI_MAP_PE_DMA_WINDOW);
OPAL_CALL(opal_pci_map_pe_dma_window_real, OPAL_PCI_MAP_PE_DMA_WINDOW_REAL);
OPAL_CALL(opal_pci_reset, OPAL_PCI_RESET);
+OPAL_CALL(opal_pci_get_hub_diag_data, OPAL_PCI_GET_HUB_DIAG_DATA);
+OPAL_CALL(opal_pci_get_phb_diag_data, OPAL_PCI_GET_PHB_DIAG_DATA);
+OPAL_CALL(opal_pci_fence_phb, OPAL_PCI_FENCE_PHB);
+OPAL_CALL(opal_pci_reinit, OPAL_PCI_REINIT);
+OPAL_CALL(opal_pci_mask_pe_error, OPAL_PCI_MASK_PE_ERROR);
+OPAL_CALL(opal_set_slot_led_status, OPAL_SET_SLOT_LED_STATUS);
+OPAL_CALL(opal_get_epow_status, OPAL_GET_EPOW_STATUS);
+OPAL_CALL(opal_set_system_attention_led, OPAL_SET_SYSTEM_ATTENTION_LED);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
new file mode 100644
index 00000000000..f31162cfdaa
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -0,0 +1,1330 @@
+/*
+ * Support PCI/PCIe on PowerNV platforms
+ *
+ * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/msi.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/opal.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+struct resource_wrap {
+ struct list_head link;
+ resource_size_t size;
+ resource_size_t align;
+ struct pci_dev *dev; /* Set if it's a device */
+ struct pci_bus *bus; /* Set if it's a bridge */
+};
+
+static int __pe_printk(const char *level, const struct pnv_ioda_pe *pe,
+ struct va_format *vaf)
+{
+ char pfix[32];
+
+ if (pe->pdev)
+ strlcpy(pfix, dev_name(&pe->pdev->dev), sizeof(pfix));
+ else
+ sprintf(pfix, "%04x:%02x ",
+ pci_domain_nr(pe->pbus), pe->pbus->number);
+ return printk("pci %s%s: [PE# %.3d] %pV", level, pfix, pe->pe_number, vaf);
+}
+
+#define define_pe_printk_level(func, kern_level) \
+static int func(const struct pnv_ioda_pe *pe, const char *fmt, ...) \
+{ \
+ struct va_format vaf; \
+ va_list args; \
+ int r; \
+ \
+ va_start(args, fmt); \
+ \
+ vaf.fmt = fmt; \
+ vaf.va = &args; \
+ \
+ r = __pe_printk(kern_level, pe, &vaf); \
+ va_end(args); \
+ \
+ return r; \
+} \
+
+define_pe_printk_level(pe_err, KERN_ERR);
+define_pe_printk_level(pe_warn, KERN_WARNING);
+define_pe_printk_level(pe_info, KERN_INFO);
+
+
+/* Calculate resource usage & alignment requirement of a single
+ * device. This will also assign all resources within the device
+ * for a given type starting at 0 for the biggest one and then
+ * assigning in decreasing order of size.
+ */
+static void __devinit pnv_ioda_calc_dev(struct pci_dev *dev, unsigned int flags,
+ resource_size_t *size,
+ resource_size_t *align)
+{
+ resource_size_t start;
+ struct resource *r;
+ int i;
+
+ pr_devel(" -> CDR %s\n", pci_name(dev));
+
+ *size = *align = 0;
+
+ /* Clear the resources out and mark them all unset */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ r = &dev->resource[i];
+ if (!(r->flags & flags))
+ continue;
+ if (r->start) {
+ r->end -= r->start;
+ r->start = 0;
+ }
+ r->flags |= IORESOURCE_UNSET;
+ }
+
+ /* We currently keep all memory resources together, we
+ * will handle prefetch & 64-bit separately in the future
+ * but for now we stick everybody in M32
+ */
+ start = 0;
+ for (;;) {
+ resource_size_t max_size = 0;
+ int max_no = -1;
+
+ /* Find next biggest resource */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ r = &dev->resource[i];
+ if (!(r->flags & IORESOURCE_UNSET) ||
+ !(r->flags & flags))
+ continue;
+ if (resource_size(r) > max_size) {
+ max_size = resource_size(r);
+ max_no = i;
+ }
+ }
+ if (max_no < 0)
+ break;
+ r = &dev->resource[max_no];
+ if (max_size > *align)
+ *align = max_size;
+ *size += max_size;
+ r->start = start;
+ start += max_size;
+ r->end = r->start + max_size - 1;
+ r->flags &= ~IORESOURCE_UNSET;
+ pr_devel(" -> R%d %016llx..%016llx\n",
+ max_no, r->start, r->end);
+ }
+ pr_devel(" <- CDR %s size=%llx align=%llx\n",
+ pci_name(dev), *size, *align);
+}
+
+/* Allocate a resource "wrap" for a given device or bridge and
+ * insert it at the right position in the sorted list
+ */
+static void __devinit pnv_ioda_add_wrap(struct list_head *list,
+ struct pci_bus *bus,
+ struct pci_dev *dev,
+ resource_size_t size,
+ resource_size_t align)
+{
+ struct resource_wrap *w1, *w = kzalloc(sizeof(*w), GFP_KERNEL);
+
+ w->size = size;
+ w->align = align;
+ w->dev = dev;
+ w->bus = bus;
+
+ list_for_each_entry(w1, list, link) {
+ if (w1->align < align) {
+ list_add_tail(&w->link, &w1->link);
+ return;
+ }
+ }
+ list_add_tail(&w->link, list);
+}
+
+/* Offset device resources of a given type */
+static void __devinit pnv_ioda_offset_dev(struct pci_dev *dev,
+ unsigned int flags,
+ resource_size_t offset)
+{
+ struct resource *r;
+ int i;
+
+ pr_devel(" -> ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ r = &dev->resource[i];
+ if (r->flags & flags) {
+ dev->resource[i].start += offset;
+ dev->resource[i].end += offset;
+ }
+ }
+
+ pr_devel(" <- ODR %s [%x] +%016llx\n", pci_name(dev), flags, offset);
+}
+
+/* Offset bus resources (& all children) of a given type */
+static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
+ unsigned int flags,
+ resource_size_t offset)
+{
+ struct resource *r;
+ struct pci_dev *dev;
+ struct pci_bus *cbus;
+ int i;
+
+ pr_devel(" -> OBR %s [%x] +%016llx\n",
+ bus->self ? pci_name(bus->self) : "root", flags, offset);
+
+ for (i = 0; i < 2; i++) {
+ r = bus->resource[i];
+ if (r && (r->flags & flags)) {
+ bus->resource[i]->start += offset;
+ bus->resource[i]->end += offset;
+ }
+ }
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ pnv_ioda_offset_dev(dev, flags, offset);
+ list_for_each_entry(cbus, &bus->children, node)
+ pnv_ioda_offset_bus(cbus, flags, offset);
+
+ pr_devel(" <- OBR %s [%x]\n",
+ bus->self ? pci_name(bus->self) : "root", flags);
+}
+
+/* This is the guts of our IODA resource allocation. This is called
+ * recursively for each bus in the system. It calculates all the
+ * necessary size and requirements for children and assign them
+ * resources such that:
+ *
+ * - Each function fits in it's own contiguous set of IO/M32
+ * segment
+ *
+ * - All segments behind a P2P bridge are contiguous and obey
+ * alignment constraints of those bridges
+ */
+static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
+ resource_size_t *size,
+ resource_size_t *align)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pnv_phb *phb = hose->private_data;
+ resource_size_t dev_size, dev_align, start;
+ resource_size_t min_align, min_balign;
+ struct pci_dev *cdev;
+ struct pci_bus *cbus;
+ struct list_head head;
+ struct resource_wrap *w;
+ unsigned int bres;
+
+ *size = *align = 0;
+
+ pr_devel("-> CBR %s [%x]\n",
+ bus->self ? pci_name(bus->self) : "root", flags);
+
+ /* Calculate alignment requirements based on the type
+ * of resource we are working on
+ */
+ if (flags & IORESOURCE_IO) {
+ bres = 0;
+ min_align = phb->ioda.io_segsize;
+ min_balign = 0x1000;
+ } else {
+ bres = 1;
+ min_align = phb->ioda.m32_segsize;
+ min_balign = 0x100000;
+ }
+
+ /* Gather all our children resources ordered by alignment */
+ INIT_LIST_HEAD(&head);
+
+ /* - Busses */
+ list_for_each_entry(cbus, &bus->children, node) {
+ pnv_ioda_calc_bus(cbus, flags, &dev_size, &dev_align);
+ pnv_ioda_add_wrap(&head, cbus, NULL, dev_size, dev_align);
+ }
+
+ /* - Devices */
+ list_for_each_entry(cdev, &bus->devices, bus_list) {
+ pnv_ioda_calc_dev(cdev, flags, &dev_size, &dev_align);
+ /* Align them to segment size */
+ if (dev_align < min_align)
+ dev_align = min_align;
+ pnv_ioda_add_wrap(&head, NULL, cdev, dev_size, dev_align);
+ }
+ if (list_empty(&head))
+ goto empty;
+
+ /* Now we can do two things: assign offsets to them within that
+ * level and get our total alignment & size requirements. The
+ * assignment algorithm is going to be uber-trivial for now, we
+ * can try to be smarter later at filling out holes.
+ */
+ start = bus->self ? 0 : bus->resource[bres]->start;
+
+ /* Don't hand out IO 0 */
+ if ((flags & IORESOURCE_IO) && !bus->self)
+ start += 0x1000;
+
+ while(!list_empty(&head)) {
+ w = list_first_entry(&head, struct resource_wrap, link);
+ list_del(&w->link);
+ if (w->size) {
+ if (start) {
+ start = ALIGN(start, w->align);
+ if (w->dev)
+ pnv_ioda_offset_dev(w->dev,flags,start);
+ else if (w->bus)
+ pnv_ioda_offset_bus(w->bus,flags,start);
+ }
+ if (w->align > *align)
+ *align = w->align;
+ }
+ start += w->size;
+ kfree(w);
+ }
+ *size = start;
+
+ /* Align and setup bridge resources */
+ *align = max_t(resource_size_t, *align,
+ max_t(resource_size_t, min_align, min_balign));
+ *size = ALIGN(*size,
+ max_t(resource_size_t, min_align, min_balign));
+ empty:
+ /* Only setup P2P's, not the PHB itself */
+ if (bus->self) {
+ WARN_ON(bus->resource[bres] == NULL);
+ bus->resource[bres]->start = 0;
+ bus->resource[bres]->flags = (*size) ? flags : 0;
+ bus->resource[bres]->end = (*size) ? (*size - 1) : 0;
+
+ /* Clear prefetch bus resources for now */
+ bus->resource[2]->flags = 0;
+ }
+
+ pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",
+ bus->self ? pci_name(bus->self) : "root", flags,*size,*align);
+}
+
+static struct pci_dn *pnv_ioda_get_pdn(struct pci_dev *dev)
+{
+ struct device_node *np;
+
+ np = pci_device_to_OF_node(dev);
+ if (!np)
+ return NULL;
+ return PCI_DN(np);
+}
+
+static void __devinit pnv_ioda_setup_pe_segments(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ unsigned int pe, i;
+ resource_size_t pos;
+ struct resource io_res;
+ struct resource m32_res;
+ struct pci_bus_region region;
+ int rc;
+
+ /* Anything not referenced in the device-tree gets PE#0 */
+ pe = pdn ? pdn->pe_number : 0;
+
+ /* Calculate the device min/max */
+ io_res.start = m32_res.start = (resource_size_t)-1;
+ io_res.end = m32_res.end = 0;
+ io_res.flags = IORESOURCE_IO;
+ m32_res.flags = IORESOURCE_MEM;
+
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *r = NULL;
+ if (dev->resource[i].flags & IORESOURCE_IO)
+ r = &io_res;
+ if (dev->resource[i].flags & IORESOURCE_MEM)
+ r = &m32_res;
+ if (!r)
+ continue;
+ if (dev->resource[i].start < r->start)
+ r->start = dev->resource[i].start;
+ if (dev->resource[i].end > r->end)
+ r->end = dev->resource[i].end;
+ }
+
+ /* Setup IO segments */
+ if (io_res.start < io_res.end) {
+ pcibios_resource_to_bus(dev, &region, &io_res);
+ pos = region.start;
+ i = pos / phb->ioda.io_segsize;
+ while(i < phb->ioda.total_pe && pos <= region.end) {
+ if (phb->ioda.io_segmap[i]) {
+ pr_err("%s: Trying to use IO seg #%d which is"
+ " already used by PE# %d\n",
+ pci_name(dev), i,
+ phb->ioda.io_segmap[i]);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ phb->ioda.io_segmap[i] = pe;
+ rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+ OPAL_IO_WINDOW_TYPE,
+ 0, i);
+ if (rc != OPAL_SUCCESS) {
+ pr_err("%s: OPAL error %d setting up mapping"
+ " for IO seg# %d\n",
+ pci_name(dev), rc, i);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ pos += phb->ioda.io_segsize;
+ i++;
+ };
+ }
+
+ /* Setup M32 segments */
+ if (m32_res.start < m32_res.end) {
+ pcibios_resource_to_bus(dev, &region, &m32_res);
+ pos = region.start;
+ i = pos / phb->ioda.m32_segsize;
+ while(i < phb->ioda.total_pe && pos <= region.end) {
+ if (phb->ioda.m32_segmap[i]) {
+ pr_err("%s: Trying to use M32 seg #%d which is"
+ " already used by PE# %d\n",
+ pci_name(dev), i,
+ phb->ioda.m32_segmap[i]);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ phb->ioda.m32_segmap[i] = pe;
+ rc = opal_pci_map_pe_mmio_window(phb->opal_id, pe,
+ OPAL_M32_WINDOW_TYPE,
+ 0, i);
+ if (rc != OPAL_SUCCESS) {
+ pr_err("%s: OPAL error %d setting up mapping"
+ " for M32 seg# %d\n",
+ pci_name(dev), rc, i);
+ /* XXX DO SOMETHING TO DISABLE DEVICE ? */
+ break;
+ }
+ pos += phb->ioda.m32_segsize;
+ i++;
+ }
+ }
+}
+
+/* Check if a resource still fits in the total IO or M32 range
+ * for a given PHB
+ */
+static int __devinit pnv_ioda_resource_fit(struct pci_controller *hose,
+ struct resource *r)
+{
+ struct resource *bounds;
+
+ if (r->flags & IORESOURCE_IO)
+ bounds = &hose->io_resource;
+ else if (r->flags & IORESOURCE_MEM)
+ bounds = &hose->mem_resources[0];
+ else
+ return 1;
+
+ if (r->start >= bounds->start && r->end <= bounds->end)
+ return 1;
+ r->flags = 0;
+ return 0;
+}
+
+static void __devinit pnv_ioda_update_resources(struct pci_bus *bus)
+{
+ struct pci_controller *hose = pci_bus_to_host(bus);
+ struct pci_bus *cbus;
+ struct pci_dev *cdev;
+ unsigned int i;
+
+ /* We used to clear all device enables here. However it looks like
+ * clearing MEM enable causes Obsidian (IPR SCS) to go bonkers,
+ * and shoot fatal errors to the PHB which in turns fences itself
+ * and we can't recover from that ... yet. So for now, let's leave
+ * the enables as-is and hope for the best.
+ */
+
+ /* Check if bus resources fit in our IO or M32 range */
+ for (i = 0; bus->self && (i < 2); i++) {
+ struct resource *r = bus->resource[i];
+ if (r && !pnv_ioda_resource_fit(hose, r))
+ pr_err("%s: Bus %d resource %d disabled, no room\n",
+ pci_name(bus->self), bus->number, i);
+ }
+
+ /* Update self if it's not a PHB */
+ if (bus->self)
+ pci_setup_bridge(bus);
+
+ /* Update child devices */
+ list_for_each_entry(cdev, &bus->devices, bus_list) {
+ /* Check if resource fits, if not, disabled it */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *r = &cdev->resource[i];
+ if (!pnv_ioda_resource_fit(hose, r))
+ pr_err("%s: Resource %d disabled, no room\n",
+ pci_name(cdev), i);
+ }
+
+ /* Assign segments */
+ pnv_ioda_setup_pe_segments(cdev);
+
+ /* Update HW BARs */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++)
+ pci_update_resource(cdev, i);
+ }
+
+ /* Update child busses */
+ list_for_each_entry(cbus, &bus->children, node)
+ pnv_ioda_update_resources(cbus);
+}
+
+static int __devinit pnv_ioda_alloc_pe(struct pnv_phb *phb)
+{
+ unsigned long pe;
+
+ do {
+ pe = find_next_zero_bit(phb->ioda.pe_alloc,
+ phb->ioda.total_pe, 0);
+ if (pe >= phb->ioda.total_pe)
+ return IODA_INVALID_PE;
+ } while(test_and_set_bit(pe, phb->ioda.pe_alloc));
+
+ phb->ioda.pe_array[pe].pe_number = pe;
+ return pe;
+}
+
+static void __devinit pnv_ioda_free_pe(struct pnv_phb *phb, int pe)
+{
+ WARN_ON(phb->ioda.pe_array[pe].pdev);
+
+ memset(&phb->ioda.pe_array[pe], 0, sizeof(struct pnv_ioda_pe));
+ clear_bit(pe, phb->ioda.pe_alloc);
+}
+
+/* Currently those 2 are only used when MSIs are enabled, this will change
+ * but in the meantime, we need to protect them to avoid warnings
+ */
+#ifdef CONFIG_PCI_MSI
+static struct pnv_ioda_pe * __devinit __pnv_ioda_get_one_pe(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+ if (!pdn)
+ return NULL;
+ if (pdn->pe_number == IODA_INVALID_PE)
+ return NULL;
+ return &phb->ioda.pe_array[pdn->pe_number];
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_get_pe(struct pci_dev *dev)
+{
+ struct pnv_ioda_pe *pe = __pnv_ioda_get_one_pe(dev);
+
+ while (!pe && dev->bus->self) {
+ dev = dev->bus->self;
+ pe = __pnv_ioda_get_one_pe(dev);
+ if (pe)
+ pe = pe->bus_pe;
+ }
+ return pe;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int __devinit pnv_ioda_configure_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ struct pci_dev *parent;
+ uint8_t bcomp, dcomp, fcomp;
+ long rc, rid_end, rid;
+
+ /* Bus validation ? */
+ if (pe->pbus) {
+ int count;
+
+ dcomp = OPAL_IGNORE_RID_DEVICE_NUMBER;
+ fcomp = OPAL_IGNORE_RID_FUNCTION_NUMBER;
+ parent = pe->pbus->self;
+ count = pe->pbus->subordinate - pe->pbus->secondary + 1;
+ switch(count) {
+ case 1: bcomp = OpalPciBusAll; break;
+ case 2: bcomp = OpalPciBus7Bits; break;
+ case 4: bcomp = OpalPciBus6Bits; break;
+ case 8: bcomp = OpalPciBus5Bits; break;
+ case 16: bcomp = OpalPciBus4Bits; break;
+ case 32: bcomp = OpalPciBus3Bits; break;
+ default:
+ pr_err("%s: Number of subordinate busses %d"
+ " unsupported\n",
+ pci_name(pe->pbus->self), count);
+ /* Do an exact match only */
+ bcomp = OpalPciBusAll;
+ }
+ rid_end = pe->rid + (count << 8);
+ } else {
+ parent = pe->pdev->bus->self;
+ bcomp = OpalPciBusAll;
+ dcomp = OPAL_COMPARE_RID_DEVICE_NUMBER;
+ fcomp = OPAL_COMPARE_RID_FUNCTION_NUMBER;
+ rid_end = pe->rid + 1;
+ }
+
+ /* Associate PE in PELT */
+ rc = opal_pci_set_pe(phb->opal_id, pe->pe_number, pe->rid,
+ bcomp, dcomp, fcomp, OPAL_MAP_PE);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld trying to setup PELT table\n", rc);
+ return -ENXIO;
+ }
+ opal_pci_eeh_freeze_clear(phb->opal_id, pe->pe_number,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+
+ /* Add to all parents PELT-V */
+ while (parent) {
+ struct pci_dn *pdn = pnv_ioda_get_pdn(parent);
+ if (pdn && pdn->pe_number != IODA_INVALID_PE) {
+ rc = opal_pci_set_peltv(phb->opal_id, pdn->pe_number,
+ pe->pe_number, OPAL_ADD_PE_TO_DOMAIN);
+ /* XXX What to do in case of error ? */
+ }
+ parent = parent->bus->self;
+ }
+ /* Setup reverse map */
+ for (rid = pe->rid; rid < rid_end; rid++)
+ phb->ioda.pe_rmap[rid] = pe->pe_number;
+
+ /* Setup one MVTs on IODA1 */
+ if (phb->type == PNV_PHB_IODA1) {
+ pe->mve_number = pe->pe_number;
+ rc = opal_pci_set_mve(phb->opal_id, pe->mve_number,
+ pe->pe_number);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld setting up MVE %d\n",
+ rc, pe->mve_number);
+ pe->mve_number = -1;
+ } else {
+ rc = opal_pci_set_mve_enable(phb->opal_id,
+ pe->mve_number, OPAL_ENABLE_MVE);
+ if (rc) {
+ pe_err(pe, "OPAL error %ld enabling MVE %d\n",
+ rc, pe->mve_number);
+ pe->mve_number = -1;
+ }
+ }
+ } else if (phb->type == PNV_PHB_IODA2)
+ pe->mve_number = 0;
+
+ return 0;
+}
+
+static void __devinit pnv_ioda_link_pe_by_weight(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ struct pnv_ioda_pe *lpe;
+
+ list_for_each_entry(lpe, &phb->ioda.pe_list, link) {
+ if (lpe->dma_weight < pe->dma_weight) {
+ list_add_tail(&pe->link, &lpe->link);
+ return;
+ }
+ }
+ list_add_tail(&pe->link, &phb->ioda.pe_list);
+}
+
+static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
+{
+ /* This is quite simplistic. The "base" weight of a device
+ * is 10. 0 means no DMA is to be accounted for it.
+ */
+
+ /* If it's a bridge, no DMA */
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL)
+ return 0;
+
+ /* Reduce the weight of slow USB controllers */
+ if (dev->class == PCI_CLASS_SERIAL_USB_UHCI ||
+ dev->class == PCI_CLASS_SERIAL_USB_OHCI ||
+ dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ return 3;
+
+ /* Increase the weight of RAID (includes Obsidian) */
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)
+ return 15;
+
+ /* Default */
+ return 10;
+}
+
+static struct pnv_ioda_pe * __devinit pnv_ioda_setup_dev_PE(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+ struct pnv_ioda_pe *pe;
+ int pe_num;
+
+ if (!pdn) {
+ pr_err("%s: Device tree node not associated properly\n",
+ pci_name(dev));
+ return NULL;
+ }
+ if (pdn->pe_number != IODA_INVALID_PE)
+ return NULL;
+
+ /* PE#0 has been pre-set */
+ if (dev->bus->number == 0)
+ pe_num = 0;
+ else
+ pe_num = pnv_ioda_alloc_pe(phb);
+ if (pe_num == IODA_INVALID_PE) {
+ pr_warning("%s: Not enough PE# available, disabling device\n",
+ pci_name(dev));
+ return NULL;
+ }
+
+ /* NOTE: We get only one ref to the pci_dev for the pdn, not for the
+ * pointer in the PE data structure, both should be destroyed at the
+ * same time. However, this needs to be looked at more closely again
+ * once we actually start removing things (Hotplug, SR-IOV, ...)
+ *
+ * At some point we want to remove the PDN completely anyways
+ */
+ pe = &phb->ioda.pe_array[pe_num];
+ pci_dev_get(dev);
+ pdn->pcidev = dev;
+ pdn->pe_number = pe_num;
+ pe->pdev = dev;
+ pe->pbus = NULL;
+ pe->tce32_seg = -1;
+ pe->mve_number = -1;
+ pe->rid = dev->bus->number << 8 | pdn->devfn;
+
+ pe_info(pe, "Associated device to PE\n");
+
+ if (pnv_ioda_configure_pe(phb, pe)) {
+ /* XXX What do we do here ? */
+ if (pe_num)
+ pnv_ioda_free_pe(phb, pe_num);
+ pdn->pe_number = IODA_INVALID_PE;
+ pe->pdev = NULL;
+ pci_dev_put(dev);
+ return NULL;
+ }
+
+ /* Assign a DMA weight to the device */
+ pe->dma_weight = pnv_ioda_dma_weight(dev);
+ if (pe->dma_weight != 0) {
+ phb->ioda.dma_weight += pe->dma_weight;
+ phb->ioda.dma_pe_count++;
+ }
+
+ /* Link the PE */
+ pnv_ioda_link_pe_by_weight(phb, pe);
+
+ return pe;
+}
+
+static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+ if (pdn == NULL) {
+ pr_warn("%s: No device node associated with device !\n",
+ pci_name(dev));
+ continue;
+ }
+ pci_dev_get(dev);
+ pdn->pcidev = dev;
+ pdn->pe_number = pe->pe_number;
+ pe->dma_weight += pnv_ioda_dma_weight(dev);
+ if (dev->subordinate)
+ pnv_ioda_setup_same_PE(dev->subordinate, pe);
+ }
+}
+
+static void __devinit pnv_ioda_setup_bus_PE(struct pci_dev *dev,
+ struct pnv_ioda_pe *ppe)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct pnv_phb *phb = hose->private_data;
+ struct pci_bus *bus = dev->subordinate;
+ struct pnv_ioda_pe *pe;
+ int pe_num;
+
+ if (!bus) {
+ pr_warning("%s: Bridge without a subordinate bus !\n",
+ pci_name(dev));
+ return;
+ }
+ pe_num = pnv_ioda_alloc_pe(phb);
+ if (pe_num == IODA_INVALID_PE) {
+ pr_warning("%s: Not enough PE# available, disabling bus\n",
+ pci_name(dev));
+ return;
+ }
+
+ pe = &phb->ioda.pe_array[pe_num];
+ ppe->bus_pe = pe;
+ pe->pbus = bus;
+ pe->pdev = NULL;
+ pe->tce32_seg = -1;
+ pe->mve_number = -1;
+ pe->rid = bus->secondary << 8;
+ pe->dma_weight = 0;
+
+ pe_info(pe, "Secondary busses %d..%d associated with PE\n",
+ bus->secondary, bus->subordinate);
+
+ if (pnv_ioda_configure_pe(phb, pe)) {
+ /* XXX What do we do here ? */
+ if (pe_num)
+ pnv_ioda_free_pe(phb, pe_num);
+ pe->pbus = NULL;
+ return;
+ }
+
+ /* Associate it with all child devices */
+ pnv_ioda_setup_same_PE(bus, pe);
+
+ /* Account for one DMA PE if at least one DMA capable device exist
+ * below the bridge
+ */
+ if (pe->dma_weight != 0) {
+ phb->ioda.dma_weight += pe->dma_weight;
+ phb->ioda.dma_pe_count++;
+ }
+
+ /* Link the PE */
+ pnv_ioda_link_pe_by_weight(phb, pe);
+}
+
+static void __devinit pnv_ioda_setup_PEs(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ struct pnv_ioda_pe *pe;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pe = pnv_ioda_setup_dev_PE(dev);
+ if (pe == NULL)
+ continue;
+ /* Leaving the PCIe domain ... single PE# */
+ if (dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE)
+ pnv_ioda_setup_bus_PE(dev, pe);
+ else if (dev->subordinate)
+ pnv_ioda_setup_PEs(dev->subordinate);
+ }
+}
+
+static void __devinit pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb,
+ struct pci_dev *dev)
+{
+ /* We delay DMA setup after we have assigned all PE# */
+}
+
+static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
+ struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ set_iommu_table_base(&dev->dev, &pe->tce32_table);
+ if (dev->subordinate)
+ pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+ }
+}
+
+static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe,
+ unsigned int base,
+ unsigned int segs)
+{
+
+ struct page *tce_mem = NULL;
+ const __be64 *swinvp;
+ struct iommu_table *tbl;
+ unsigned int i;
+ int64_t rc;
+ void *addr;
+
+ /* 256M DMA window, 4K TCE pages, 8 bytes TCE */
+#define TCE32_TABLE_SIZE ((0x10000000 / 0x1000) * 8)
+
+ /* XXX FIXME: Handle 64-bit only DMA devices */
+ /* XXX FIXME: Provide 64-bit DMA facilities & non-4K TCE tables etc.. */
+ /* XXX FIXME: Allocate multi-level tables on PHB3 */
+
+ /* We shouldn't already have a 32-bit DMA associated */
+ if (WARN_ON(pe->tce32_seg >= 0))
+ return;
+
+ /* Grab a 32-bit TCE table */
+ pe->tce32_seg = base;
+ pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
+ (base << 28), ((base + segs) << 28) - 1);
+
+ /* XXX Currently, we allocate one big contiguous table for the
+ * TCEs. We only really need one chunk per 256M of TCE space
+ * (ie per segment) but that's an optimization for later, it
+ * requires some added smarts with our get/put_tce implementation
+ */
+ tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+ get_order(TCE32_TABLE_SIZE * segs));
+ if (!tce_mem) {
+ pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
+ goto fail;
+ }
+ addr = page_address(tce_mem);
+ memset(addr, 0, TCE32_TABLE_SIZE * segs);
+
+ /* Configure HW */
+ for (i = 0; i < segs; i++) {
+ rc = opal_pci_map_pe_dma_window(phb->opal_id,
+ pe->pe_number,
+ base + i, 1,
+ __pa(addr) + TCE32_TABLE_SIZE * i,
+ TCE32_TABLE_SIZE, 0x1000);
+ if (rc) {
+ pe_err(pe, " Failed to configure 32-bit TCE table,"
+ " err %ld\n", rc);
+ goto fail;
+ }
+ }
+
+ /* Setup linux iommu table */
+ tbl = &pe->tce32_table;
+ pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
+ base << 28);
+
+ /* OPAL variant of P7IOC SW invalidated TCEs */
+ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+ if (swinvp) {
+ /* We need a couple more fields -- an address and a data
+ * to or. Since the bus is only printed out on table free
+ * errors, and on the first pass the data will be a relative
+ * bus number, print that out instead.
+ */
+ tbl->it_busno = 0;
+ tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE
+ | TCE_PCI_SWINV_PAIR;
+ }
+ iommu_init_table(tbl, phb->hose->node);
+
+ if (pe->pdev)
+ set_iommu_table_base(&pe->pdev->dev, tbl);
+ else
+ pnv_ioda_setup_bus_dma(pe, pe->pbus);
+
+ return;
+ fail:
+ /* XXX Failure: Try to fallback to 64-bit only ? */
+ if (pe->tce32_seg >= 0)
+ pe->tce32_seg = -1;
+ if (tce_mem)
+ __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
+}
+
+static void __devinit pnv_ioda_setup_dma(struct pnv_phb *phb)
+{
+ struct pci_controller *hose = phb->hose;
+ unsigned int residual, remaining, segs, tw, base;
+ struct pnv_ioda_pe *pe;
+
+ /* If we have more PE# than segments available, hand out one
+ * per PE until we run out and let the rest fail. If not,
+ * then we assign at least one segment per PE, plus more based
+ * on the amount of devices under that PE
+ */
+ if (phb->ioda.dma_pe_count > phb->ioda.tce32_count)
+ residual = 0;
+ else
+ residual = phb->ioda.tce32_count -
+ phb->ioda.dma_pe_count;
+
+ pr_info("PCI: Domain %04x has %ld available 32-bit DMA segments\n",
+ hose->global_number, phb->ioda.tce32_count);
+ pr_info("PCI: %d PE# for a total weight of %d\n",
+ phb->ioda.dma_pe_count, phb->ioda.dma_weight);
+
+ /* Walk our PE list and configure their DMA segments, hand them
+ * out one base segment plus any residual segments based on
+ * weight
+ */
+ remaining = phb->ioda.tce32_count;
+ tw = phb->ioda.dma_weight;
+ base = 0;
+ list_for_each_entry(pe, &phb->ioda.pe_list, link) {
+ if (!pe->dma_weight)
+ continue;
+ if (!remaining) {
+ pe_warn(pe, "No DMA32 resources available\n");
+ continue;
+ }
+ segs = 1;
+ if (residual) {
+ segs += ((pe->dma_weight * residual) + (tw / 2)) / tw;
+ if (segs > remaining)
+ segs = remaining;
+ }
+ pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+ pe->dma_weight, segs);
+ pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+ remaining -= segs;
+ base += segs;
+ }
+}
+
+#ifdef CONFIG_PCI_MSI
+static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
+ unsigned int hwirq, unsigned int is_64,
+ struct msi_msg *msg)
+{
+ struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+ unsigned int xive_num = hwirq - phb->msi_base;
+ uint64_t addr64;
+ uint32_t addr32, data;
+ int rc;
+
+ /* No PE assigned ? bail out ... no MSI for you ! */
+ if (pe == NULL)
+ return -ENXIO;
+
+ /* Check if we have an MVE */
+ if (pe->mve_number < 0)
+ return -ENXIO;
+
+ /* Assign XIVE to PE */
+ rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num);
+ if (rc) {
+ pr_warn("%s: OPAL error %d setting XIVE %d PE\n",
+ pci_name(dev), rc, xive_num);
+ return -EIO;
+ }
+
+ if (is_64) {
+ rc = opal_get_msi_64(phb->opal_id, pe->mve_number, xive_num, 1,
+ &addr64, &data);
+ if (rc) {
+ pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",
+ pci_name(dev), rc);
+ return -EIO;
+ }
+ msg->address_hi = addr64 >> 32;
+ msg->address_lo = addr64 & 0xfffffffful;
+ } else {
+ rc = opal_get_msi_32(phb->opal_id, pe->mve_number, xive_num, 1,
+ &addr32, &data);
+ if (rc) {
+ pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",
+ pci_name(dev), rc);
+ return -EIO;
+ }
+ msg->address_hi = 0;
+ msg->address_lo = addr32;
+ }
+ msg->data = data;
+
+ pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
+ " address=%x_%08x data=%x PE# %d\n",
+ pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
+ msg->address_hi, msg->address_lo, data, pe->pe_number);
+
+ return 0;
+}
+
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
+{
+ unsigned int bmap_size;
+ const __be32 *prop = of_get_property(phb->hose->dn,
+ "ibm,opal-msi-ranges", NULL);
+ if (!prop) {
+ /* BML Fallback */
+ prop = of_get_property(phb->hose->dn, "msi-ranges", NULL);
+ }
+ if (!prop)
+ return;
+
+ phb->msi_base = be32_to_cpup(prop);
+ phb->msi_count = be32_to_cpup(prop + 1);
+ bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
+ phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
+ if (!phb->msi_map) {
+ pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
+ phb->hose->global_number);
+ return;
+ }
+ phb->msi_setup = pnv_pci_ioda_msi_setup;
+ phb->msi32_support = 1;
+ pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
+ phb->msi_count, phb->msi_base);
+}
+#else
+static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
+#endif /* CONFIG_PCI_MSI */
+
+/* This is the starting point of our IODA specific resource
+ * allocation process
+ */
+static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
+{
+ resource_size_t size, align;
+ struct pci_bus *child;
+
+ /* Associate PEs per functions */
+ pnv_ioda_setup_PEs(hose->bus);
+
+ /* Calculate all resources */
+ pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align);
+ pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align);
+
+ /* Apply then to HW */
+ pnv_ioda_update_resources(hose->bus);
+
+ /* Setup DMA */
+ pnv_ioda_setup_dma(hose->private_data);
+
+ /* Configure PCI Express settings */
+ list_for_each_entry(child, &hose->bus->children, node) {
+ struct pci_dev *self = child->self;
+ if (!self)
+ continue;
+ pcie_bus_configure_settings(child, self->pcie_mpss);
+ }
+}
+
+/* Prevent enabling devices for which we couldn't properly
+ * assign a PE
+ */
+static int __devinit pnv_pci_enable_device_hook(struct pci_dev *dev)
+{
+ struct pci_dn *pdn = pnv_ioda_get_pdn(dev);
+
+ if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+ return -EINVAL;
+ return 0;
+}
+
+static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
+ u32 devfn)
+{
+ return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
+}
+
+void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+{
+ struct pci_controller *hose;
+ static int primary = 1;
+ struct pnv_phb *phb;
+ unsigned long size, m32map_off, iomap_off, pemap_off;
+ const u64 *prop64;
+ u64 phb_id;
+ void *aux;
+ long rc;
+
+ pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-phbid\" property !\n");
+ return;
+ }
+ phb_id = be64_to_cpup(prop64);
+ pr_debug(" PHB-ID : 0x%016llx\n", phb_id);
+
+ phb = alloc_bootmem(sizeof(struct pnv_phb));
+ if (phb) {
+ memset(phb, 0, sizeof(struct pnv_phb));
+ phb->hose = hose = pcibios_alloc_controller(np);
+ }
+ if (!phb || !phb->hose) {
+ pr_err("PCI: Failed to allocate PCI controller for %s\n",
+ np->full_name);
+ return;
+ }
+
+ spin_lock_init(&phb->lock);
+ /* XXX Use device-tree */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+ hose->private_data = phb;
+ phb->opal_id = phb_id;
+ phb->type = PNV_PHB_IODA1;
+
+ /* Detect specific models for error handling */
+ if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
+ phb->model = PNV_PHB_MODEL_P7IOC;
+ else
+ phb->model = PNV_PHB_MODEL_UNKNOWN;
+
+ /* We parse "ranges" now since we need to deduce the register base
+ * from the IO base
+ */
+ pci_process_bridge_OF_ranges(phb->hose, np, primary);
+ primary = 0;
+
+ /* Magic formula from Milton */
+ phb->regs = of_iomap(np, 0);
+ if (phb->regs == NULL)
+ pr_err(" Failed to map registers !\n");
+
+
+ /* XXX This is hack-a-thon. This needs to be changed so that:
+ * - we obtain stuff like PE# etc... from device-tree
+ * - we properly re-allocate M32 ourselves
+ * (the OFW one isn't very good)
+ */
+
+ /* Initialize more IODA stuff */
+ phb->ioda.total_pe = 128;
+
+ phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
+ /* OFW Has already off top 64k of M32 space (MSI space) */
+ phb->ioda.m32_size += 0x10000;
+
+ phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
+ phb->ioda.m32_pci_base = hose->mem_resources[0].start -
+ hose->pci_mem_offset;
+ phb->ioda.io_size = hose->pci_io_size;
+ phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
+ phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
+
+ /* Allocate aux data & arrays */
+ size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
+ m32map_off = size;
+ size += phb->ioda.total_pe;
+ iomap_off = size;
+ size += phb->ioda.total_pe;
+ pemap_off = size;
+ size += phb->ioda.total_pe * sizeof(struct pnv_ioda_pe);
+ aux = alloc_bootmem(size);
+ memset(aux, 0, size);
+ phb->ioda.pe_alloc = aux;
+ phb->ioda.m32_segmap = aux + m32map_off;
+ phb->ioda.io_segmap = aux + iomap_off;
+ phb->ioda.pe_array = aux + pemap_off;
+ set_bit(0, phb->ioda.pe_alloc);
+
+ INIT_LIST_HEAD(&phb->ioda.pe_list);
+
+ /* Calculate how many 32-bit TCE segments we have */
+ phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
+
+ /* Clear unusable m64 */
+ hose->mem_resources[1].flags = 0;
+ hose->mem_resources[1].start = 0;
+ hose->mem_resources[1].end = 0;
+ hose->mem_resources[2].flags = 0;
+ hose->mem_resources[2].start = 0;
+ hose->mem_resources[2].end = 0;
+
+#if 0
+ rc = opal_pci_set_phb_mem_window(opal->phb_id,
+ window_type,
+ window_num,
+ starting_real_address,
+ starting_pci_address,
+ segment_size);
+#endif
+
+ pr_info(" %d PE's M32: 0x%x [segment=0x%x] IO: 0x%x [segment=0x%x]\n",
+ phb->ioda.total_pe,
+ phb->ioda.m32_size, phb->ioda.m32_segsize,
+ phb->ioda.io_size, phb->ioda.io_segsize);
+
+ if (phb->regs) {
+ pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100));
+ pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160));
+ pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170));
+ pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178));
+ pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180));
+ pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190));
+ pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
+ pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
+ }
+ phb->hose->ops = &pnv_pci_ops;
+
+ /* Setup RID -> PE mapping function */
+ phb->bdfn_to_pe = pnv_ioda_bdfn_to_pe;
+
+ /* Setup TCEs */
+ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
+
+ /* Setup MSI support */
+ pnv_pci_init_ioda_msis(phb);
+
+ /* We set both probe_only and PCI_REASSIGN_ALL_RSRC. This is an
+ * odd combination which essentially means that we skip all resource
+ * fixups and assignments in the generic code, and do it all
+ * ourselves here
+ */
+ pci_probe_only = 1;
+ ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
+ ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC);
+
+ /* Reset IODA tables to a clean state */
+ rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
+ if (rc)
+ pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
+ opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void __init pnv_pci_init_ioda_hub(struct device_node *np)
+{
+ struct device_node *phbn;
+ const u64 *prop64;
+ u64 hub_id;
+
+ pr_info("Probing IODA IO-Hub %s\n", np->full_name);
+
+ prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
+ if (!prop64) {
+ pr_err(" Missing \"ibm,opal-hubid\" property !\n");
+ return;
+ }
+ hub_id = be64_to_cpup(prop64);
+ pr_devel(" HUB-ID : 0x%016llx\n", hub_id);
+
+ /* Count child PHBs */
+ for_each_child_of_node(np, phbn) {
+ /* Look for IODA1 PHBs */
+ if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
+ pnv_pci_init_ioda1_phb(phbn);
+ }
+}
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
index 4c80f7c77d5..264967770c3 100644
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
@@ -137,6 +137,7 @@ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np,
phb->hose->private_data = phb;
phb->opal_id = phb_id;
phb->type = PNV_PHB_P5IOC2;
+ phb->model = PNV_PHB_MODEL_P5IOC2;
phb->regs = of_iomap(np, 0);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 85bb66d7f93..a70bc1e385e 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -144,6 +144,112 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
}
#endif /* CONFIG_PCI_MSI */
+static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
+{
+ struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
+ int i;
+
+ pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
+
+ pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl);
+
+ pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg);
+ pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus);
+ pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus);
+
+ pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus);
+ pr_info(" slotStatus = 0x%08x\n", data->slotStatus);
+ pr_info(" linkStatus = 0x%08x\n", data->linkStatus);
+ pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus);
+ pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus);
+
+ pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus);
+ pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus);
+ pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus);
+ pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1);
+ pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2);
+ pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3);
+ pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4);
+ pr_info(" sourceId = 0x%08x\n", data->sourceId);
+
+ pr_info(" errorClass = 0x%016llx\n", data->errorClass);
+ pr_info(" correlator = 0x%016llx\n", data->correlator);
+
+ pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr);
+ pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr);
+ pr_info(" lemFir = 0x%016llx\n", data->lemFir);
+ pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask);
+ pr_info(" lemWOF = 0x%016llx\n", data->lemWOF);
+ pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus);
+ pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus);
+ pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0);
+ pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1);
+ pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus);
+ pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
+ pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0);
+ pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1);
+ pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus);
+ pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
+ pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0);
+ pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1);
+ pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus);
+ pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
+ pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0);
+ pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1);
+
+ for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+ if ((data->pestA[i] >> 63) == 0 &&
+ (data->pestB[i] >> 63) == 0)
+ continue;
+ pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]);
+ pr_info(" PESTB = 0x%016llx\n", data->pestB[i]);
+ }
+}
+
+static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
+{
+ switch(phb->model) {
+ case PNV_PHB_MODEL_P7IOC:
+ pnv_pci_dump_p7ioc_diag_data(phb);
+ break;
+ default:
+ pr_warning("PCI %d: Can't decode this PHB diag data\n",
+ phb->hose->global_number);
+ }
+}
+
+static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
+{
+ unsigned long flags, rc;
+ int has_diag;
+
+ spin_lock_irqsave(&phb->lock, flags);
+
+ rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+ has_diag = (rc == OPAL_SUCCESS);
+
+ rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ if (rc) {
+ pr_warning("PCI %d: Failed to clear EEH freeze state"
+ " for PE#%d, err %ld\n",
+ phb->hose->global_number, pe_no, rc);
+
+ /* For now, let's only display the diag buffer when we fail to clear
+ * the EEH status. We'll do more sensible things later when we have
+ * proper EEH support. We need to make sure we don't pollute ourselves
+ * with the normal errors generated when probing empty slots
+ */
+ if (has_diag)
+ pnv_pci_dump_phb_diag_data(phb);
+ else
+ pr_warning("PCI %d: No diag data available\n",
+ phb->hose->global_number);
+ }
+
+ spin_unlock_irqrestore(&phb->lock, flags);
+}
+
static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
u32 bdfn)
{
@@ -165,15 +271,8 @@ static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
}
cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
bdfn, pe_no, fstate);
- if (fstate != 0) {
- rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
- OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
- if (rc) {
- pr_warning("PCI %d: Failed to clear EEH freeze state"
- " for PE#%d, err %lld\n",
- phb->hose->global_number, pe_no, rc);
- }
- }
+ if (fstate != 0)
+ pnv_pci_handle_eeh_config(phb, pe_no);
}
static int pnv_pci_read_config(struct pci_bus *bus,
@@ -257,12 +356,54 @@ struct pci_ops pnv_pci_ops = {
.write = pnv_pci_write_config,
};
+
+static void pnv_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ unsigned long start, end, inc;
+
+ start = __pa(startp);
+ end = __pa(endp);
+
+
+ /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+ if (tbl->it_busno) {
+ start <<= 12;
+ end <<= 12;
+ inc = 128 << 12;
+ start |= tbl->it_busno;
+ end |= tbl->it_busno;
+ }
+ /* p7ioc-style invalidation, 2 TCEs per write */
+ else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+ start |= (1ull << 63);
+ end |= (1ull << 63);
+ inc = 16;
+ }
+ /* Default (older HW) */
+ else
+ inc = 128;
+
+ end |= inc - 1; /* round up end to be different than start */
+
+ mb(); /* Ensure above stores are visible */
+ while (start <= end) {
+ __raw_writeq(start, invalidate);
+ start += inc;
+ }
+ /* The iommu layer will do another mb() for us on build() and
+ * we don't care on free()
+ */
+}
+
+
static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
unsigned long uaddr, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 proto_tce;
- u64 *tcep;
+ u64 *tcep, *tces;
u64 rpn;
proto_tce = TCE_PCI_READ; // Read allowed
@@ -270,25 +411,33 @@ static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
- tcep = ((u64 *)tbl->it_base) + index;
+ tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
+ rpn = __pa(uaddr) >> TCE_SHIFT;
- while (npages--) {
- /* can't move this out since we might cross LMB boundary */
- rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
- *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+ while (npages--)
+ *(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
+
+ /* Some implementations won't cache invalid TCEs and thus may not
+ * need that flush. We'll probably turn it_type into a bit mask
+ * of flags if that becomes the case
+ */
+ if (tbl->it_type & TCE_PCI_SWINV_CREATE)
+ pnv_tce_invalidate(tbl, tces, tcep - 1);
- uaddr += TCE_PAGE_SIZE;
- tcep++;
- }
return 0;
}
static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
{
- u64 *tcep = ((u64 *)tbl->it_base) + index;
+ u64 *tcep, *tces;
+
+ tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
while (npages--)
*(tcep++) = 0;
+
+ if (tbl->it_type & TCE_PCI_SWINV_FREE)
+ pnv_tce_invalidate(tbl, tces, tcep - 1);
}
void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
@@ -308,13 +457,14 @@ static struct iommu_table * __devinit
pnv_pci_setup_bml_iommu(struct pci_controller *hose)
{
struct iommu_table *tbl;
- const __be64 *basep;
+ const __be64 *basep, *swinvp;
const __be32 *sizep;
basep = of_get_property(hose->dn, "linux,tce-base", NULL);
sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
if (basep == NULL || sizep == NULL) {
- pr_err("PCI: %s has missing tce entries !\n", hose->dn->full_name);
+ pr_err("PCI: %s has missing tce entries !\n",
+ hose->dn->full_name);
return NULL;
}
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
@@ -323,6 +473,15 @@ pnv_pci_setup_bml_iommu(struct pci_controller *hose)
pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
be32_to_cpup(sizep), 0);
iommu_init_table(tbl, hose->node);
+
+ /* Deal with SW invalidated TCEs when needed (BML way) */
+ swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
+ NULL);
+ if (swinvp) {
+ tbl->it_busno = swinvp[1];
+ tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ }
return tbl;
}
@@ -356,6 +515,13 @@ static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
pnv_pci_dma_fallback_setup(hose, pdev);
}
+/* Fixup wrong class code in p7ioc root complex */
+static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
+
static int pnv_pci_probe_mode(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
@@ -400,12 +566,24 @@ void __init pnv_pci_init(void)
init_pci_config_tokens();
find_and_init_phbs();
#endif /* CONFIG_PPC_POWERNV_RTAS */
- } else {
- /* OPAL is here, do our normal stuff */
+ }
+ /* OPAL is here, do our normal stuff */
+ else {
+ int found_ioda = 0;
+
+ /* Look for IODA IO-Hubs. We don't support mixing IODA
+ * and p5ioc2 due to the need to change some global
+ * probing flags
+ */
+ for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
+ pnv_pci_init_ioda_hub(np);
+ found_ioda = 1;
+ }
/* Look for p5ioc2 IO-Hubs */
- for_each_compatible_node(np, NULL, "ibm,p5ioc2")
- pnv_pci_init_p5ioc2_hub(np);
+ if (!found_ioda)
+ for_each_compatible_node(np, NULL, "ibm,p5ioc2")
+ pnv_pci_init_p5ioc2_hub(np);
}
/* Setup the linkage between OF nodes and PHBs */
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index d4dbc495093..8bc47963464 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -9,9 +9,63 @@ enum pnv_phb_type {
PNV_PHB_IODA2,
};
+/* Precise PHB model for error management */
+enum pnv_phb_model {
+ PNV_PHB_MODEL_UNKNOWN,
+ PNV_PHB_MODEL_P5IOC2,
+ PNV_PHB_MODEL_P7IOC,
+};
+
+#define PNV_PCI_DIAG_BUF_SIZE 4096
+
+/* Data associated with a PE, including IOMMU tracking etc.. */
+struct pnv_ioda_pe {
+ /* A PE can be associated with a single device or an
+ * entire bus (& children). In the former case, pdev
+ * is populated, in the later case, pbus is.
+ */
+ struct pci_dev *pdev;
+ struct pci_bus *pbus;
+
+ /* Effective RID (device RID for a device PE and base bus
+ * RID with devfn 0 for a bus PE)
+ */
+ unsigned int rid;
+
+ /* PE number */
+ unsigned int pe_number;
+
+ /* "Weight" assigned to the PE for the sake of DMA resource
+ * allocations
+ */
+ unsigned int dma_weight;
+
+ /* This is a PCI-E -> PCI-X bridge, this points to the
+ * corresponding bus PE
+ */
+ struct pnv_ioda_pe *bus_pe;
+
+ /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
+ int tce32_seg;
+ int tce32_segcount;
+ struct iommu_table tce32_table;
+
+ /* XXX TODO: Add support for additional 64-bit iommus */
+
+ /* MSIs. MVE index is identical for for 32 and 64 bit MSI
+ * and -1 if not supported. (It's actually identical to the
+ * PE number)
+ */
+ int mve_number;
+
+ /* Link in list of PE#s */
+ struct list_head link;
+};
+
struct pnv_phb {
struct pci_controller *hose;
enum pnv_phb_type type;
+ enum pnv_phb_model model;
u64 opal_id;
void __iomem *regs;
spinlock_t lock;
@@ -34,7 +88,52 @@ struct pnv_phb {
struct {
struct iommu_table iommu_table;
} p5ioc2;
+
+ struct {
+ /* Global bridge info */
+ unsigned int total_pe;
+ unsigned int m32_size;
+ unsigned int m32_segsize;
+ unsigned int m32_pci_base;
+ unsigned int io_size;
+ unsigned int io_segsize;
+ unsigned int io_pci_base;
+
+ /* PE allocation bitmap */
+ unsigned long *pe_alloc;
+
+ /* M32 & IO segment maps */
+ unsigned int *m32_segmap;
+ unsigned int *io_segmap;
+ struct pnv_ioda_pe *pe_array;
+
+ /* Reverse map of PEs, will have to extend if
+ * we are to support more than 256 PEs, indexed
+ * bus { bus, devfn }
+ */
+ unsigned char pe_rmap[0x10000];
+
+ /* 32-bit TCE tables allocation */
+ unsigned long tce32_count;
+
+ /* Total "weight" for the sake of DMA resources
+ * allocation
+ */
+ unsigned int dma_weight;
+ unsigned int dma_pe_count;
+
+ /* Sorted list of used PE's, sorted at
+ * boot for resource allocation purposes
+ */
+ struct list_head pe_list;
+ } ioda;
};
+
+ /* PHB status structure */
+ union {
+ unsigned char blob[PNV_PCI_DIAG_BUF_SIZE];
+ struct OpalIoP7IOCPhbErrorData p7ioc;
+ } diag;
};
extern struct pci_ops pnv_pci_ops;
@@ -43,6 +142,7 @@ extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
void *tce_mem, u64 tce_size,
u64 dma_offset);
extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
+extern void pnv_pci_init_ioda_hub(struct device_node *np);
#endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index e8773668524..17210c526c5 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -75,7 +75,7 @@ int __devinit pnv_smp_kick_cpu(int nr)
/* On OPAL v2 the CPU are still spinning inside OPAL itself,
* get them back now
*/
- if (firmware_has_feature(FW_FEATURE_OPALv2)) {
+ if (!paca[nr].cpu_start && firmware_has_feature(FW_FEATURE_OPALv2)) {
pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
rc = opal_start_cpu(pcpu, start_here);
if (rc != OPAL_SUCCESS)
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 1d6f4f478fe..617efa12a3a 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -31,18 +31,18 @@
#if defined(DEBUG)
#define DBG udbg_printf
+#define FAIL udbg_printf
#else
-#define DBG pr_debug
+#define DBG pr_devel
+#define FAIL pr_debug
#endif
/**
* struct ps3_bmp - a per cpu irq status and mask bitmap structure
* @status: 256 bit status bitmap indexed by plug
- * @unused_1:
+ * @unused_1: Alignment
* @mask: 256 bit mask bitmap indexed by plug
- * @unused_2:
- * @lock:
- * @ipi_debug_brk_mask:
+ * @unused_2: Alignment
*
* The HV maintains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest. These mappings are implemented as 256 bit guest
@@ -73,21 +73,24 @@ struct ps3_bmp {
unsigned long mask;
u64 unused_2[3];
};
- u64 ipi_debug_brk_mask;
- spinlock_t lock;
};
/**
* struct ps3_private - a per cpu data structure
* @bmp: ps3_bmp structure
+ * @bmp_lock: Syncronize access to bmp.
+ * @ipi_debug_brk_mask: Mask for debug break IPIs
* @ppe_id: HV logical_ppe_id
* @thread_id: HV thread_id
+ * @ipi_mask: Mask of IPI virqs
*/
struct ps3_private {
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
+ spinlock_t bmp_lock;
u64 ppe_id;
u64 thread_id;
+ unsigned long ipi_debug_brk_mask;
unsigned long ipi_mask;
};
@@ -105,7 +108,7 @@ static void ps3_chip_mask(struct irq_data *d)
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
- pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+ DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
@@ -126,7 +129,7 @@ static void ps3_chip_unmask(struct irq_data *d)
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
- pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
+ DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
@@ -190,19 +193,19 @@ static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
*virq = irq_create_mapping(NULL, outlet);
if (*virq == NO_IRQ) {
- pr_debug("%s:%d: irq_create_mapping failed: outlet %lu\n",
+ FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
__func__, __LINE__, outlet);
result = -ENOMEM;
goto fail_create;
}
- pr_debug("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
+ DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
outlet, cpu, *virq);
result = irq_set_chip_data(*virq, pd);
if (result) {
- pr_debug("%s:%d: irq_set_chip_data failed\n",
+ FAIL("%s:%d: irq_set_chip_data failed\n",
__func__, __LINE__);
goto fail_set;
}
@@ -228,13 +231,13 @@ static int ps3_virq_destroy(unsigned int virq)
{
const struct ps3_private *pd = irq_get_chip_data(virq);
- pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+ DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
irq_set_chip_data(virq, NULL);
irq_dispose_mapping(virq);
- pr_debug("%s:%d <-\n", __func__, __LINE__);
+ DBG("%s:%d <-\n", __func__, __LINE__);
return 0;
}
@@ -257,7 +260,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
result = ps3_virq_setup(cpu, outlet, virq);
if (result) {
- pr_debug("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
+ FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
goto fail_setup;
}
@@ -269,7 +272,7 @@ int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
outlet, 0);
if (result) {
- pr_info("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
+ FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
result = -EPERM;
goto fail_connect;
@@ -298,7 +301,7 @@ int ps3_irq_plug_destroy(unsigned int virq)
int result;
const struct ps3_private *pd = irq_get_chip_data(virq);
- pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
+ DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
ps3_chip_mask(irq_get_irq_data(virq));
@@ -306,7 +309,7 @@ int ps3_irq_plug_destroy(unsigned int virq)
result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
if (result)
- pr_info("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
+ FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
ps3_virq_destroy(virq);
@@ -334,7 +337,7 @@ int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
result = lv1_construct_event_receive_port(&outlet);
if (result) {
- pr_debug("%s:%d: lv1_construct_event_receive_port failed: %s\n",
+ FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
*virq = NO_IRQ;
return result;
@@ -360,14 +363,14 @@ int ps3_event_receive_port_destroy(unsigned int virq)
{
int result;
- pr_debug(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
+ DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
if (result)
- pr_debug("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
+ FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
/*
@@ -375,7 +378,7 @@ int ps3_event_receive_port_destroy(unsigned int virq)
* calls from interrupt context (smp_call_function) when kexecing.
*/
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -411,7 +414,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
if (result) {
- pr_debug("%s:%d: lv1_connect_interrupt_event_receive_port"
+ FAIL("%s:%d: lv1_connect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
ps3_event_receive_port_destroy(*virq);
@@ -419,7 +422,7 @@ int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
return result;
}
- pr_debug("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+ DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, *virq);
return 0;
@@ -433,14 +436,14 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
int result;
- pr_debug(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
+ DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, virq);
result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
if (result)
- pr_debug("%s:%d: lv1_disconnect_interrupt_event_receive_port"
+ FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
@@ -455,7 +458,7 @@ int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
result = ps3_virq_destroy(virq);
BUG_ON(result);
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
@@ -480,7 +483,7 @@ int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
if (result) {
- pr_debug("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
+ FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -510,7 +513,7 @@ int ps3_io_irq_destroy(unsigned int virq)
result = lv1_destruct_io_irq_outlet(outlet);
if (result)
- pr_debug("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
+ FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
@@ -542,7 +545,7 @@ int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
if (result) {
- pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+ FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -562,7 +565,7 @@ int ps3_vuart_irq_destroy(unsigned int virq)
result = lv1_deconfigure_virtual_uart_irq();
if (result) {
- pr_debug("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
+ FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -595,7 +598,7 @@ int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
if (result) {
- pr_debug("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
+ FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
@@ -626,7 +629,7 @@ int ps3_spe_irq_destroy(unsigned int virq)
static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
const char* func, int line)
{
- pr_debug("%s:%d: %s %u {%04lx_%04lx_%04lx_%04lx}\n",
+ pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n",
func, line, header, cpu,
*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
*p & 0xffff);
@@ -635,7 +638,7 @@ static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
static void __maybe_unused _dump_256_bmp(const char *header,
const u64 *p, unsigned cpu, const char* func, int line)
{
- pr_debug("%s:%d: %s %u {%016lx:%016lx:%016lx:%016lx}\n",
+ pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n",
func, line, header, cpu, p[0], p[1], p[2], p[3]);
}
@@ -644,10 +647,10 @@ static void _dump_bmp(struct ps3_private* pd, const char* func, int line)
{
unsigned long flags;
- spin_lock_irqsave(&pd->bmp.lock, flags);
+ spin_lock_irqsave(&pd->bmp_lock, flags);
_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
- _dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
- spin_unlock_irqrestore(&pd->bmp.lock, flags);
+ _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+ spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
@@ -656,9 +659,9 @@ static void __maybe_unused _dump_mask(struct ps3_private *pd,
{
unsigned long flags;
- spin_lock_irqsave(&pd->bmp.lock, flags);
- _dump_64_bmp("mask", &pd->bmp.mask, pd->thread_id, func, line);
- spin_unlock_irqrestore(&pd->bmp.lock, flags);
+ spin_lock_irqsave(&pd->bmp_lock, flags);
+ _dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
+ spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#else
static void dump_bmp(struct ps3_private* pd) {};
@@ -667,7 +670,7 @@ static void dump_bmp(struct ps3_private* pd) {};
static int ps3_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
- pr_debug("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
+ DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
virq);
irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
@@ -690,10 +693,10 @@ void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
- pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
+ set_bit(63 - virq, &pd->ipi_debug_brk_mask);
- pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
- cpu, virq, pd->bmp.ipi_debug_brk_mask);
+ DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+ cpu, virq, pd->ipi_debug_brk_mask);
}
void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
@@ -714,14 +717,14 @@ static unsigned int ps3_get_irq(void)
/* check for ipi break first to stop this cpu ASAP */
- if (x & pd->bmp.ipi_debug_brk_mask)
- x &= pd->bmp.ipi_debug_brk_mask;
+ if (x & pd->ipi_debug_brk_mask)
+ x &= pd->ipi_debug_brk_mask;
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
if (unlikely(plug == NO_IRQ)) {
- pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
+ DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
@@ -760,9 +763,9 @@ void __init ps3_init_IRQ(void)
lv1_get_logical_ppe_id(&pd->ppe_id);
pd->thread_id = get_hard_smp_processor_id(cpu);
- spin_lock_init(&pd->bmp.lock);
+ spin_lock_init(&pd->bmp_lock);
- pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
+ DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
__func__, __LINE__, pd->ppe_id, pd->thread_id,
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
@@ -770,7 +773,7 @@ void __init ps3_init_IRQ(void)
pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
if (result)
- pr_debug("%s:%d: lv1_configure_irq_state_bitmap failed:"
+ FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:"
" %s\n", __func__, __LINE__,
ps3_result(result));
}
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index ca40f6afd35..7bdfea336f5 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -44,7 +44,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line)
s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.';
s[i] = 0;
- pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
+ pr_devel("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
#endif
}
@@ -53,7 +53,7 @@ static void _dump_field(const char *hdr, u64 n, const char *func, int line)
static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
u64 n4, const char *func, int line)
{
- pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+ pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
_dump_field("n1: ", n1, func, line);
_dump_field("n2: ", n2, func, line);
_dump_field("n3: ", n3, func, line);
@@ -65,13 +65,13 @@ static void _dump_node_name(unsigned int lpar_id, u64 n1, u64 n2, u64 n3,
static void _dump_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
u64 v1, u64 v2, const char *func, int line)
{
- pr_debug("%s:%d: lpar: %u\n", func, line, lpar_id);
+ pr_devel("%s:%d: lpar: %u\n", func, line, lpar_id);
_dump_field("n1: ", n1, func, line);
_dump_field("n2: ", n2, func, line);
_dump_field("n3: ", n3, func, line);
_dump_field("n4: ", n4, func, line);
- pr_debug("%s:%d: v1: %016llx\n", func, line, v1);
- pr_debug("%s:%d: v2: %016llx\n", func, line, v2);
+ pr_devel("%s:%d: v1: %016llx\n", func, line, v1);
+ pr_devel("%s:%d: v2: %016llx\n", func, line, v2);
}
/**
@@ -131,11 +131,11 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
lpar_id = id;
}
- result = lv1_get_repository_node_value(lpar_id, n1, n2, n3, n4, &v1,
+ result = lv1_read_repository_node(lpar_id, n1, n2, n3, n4, &v1,
&v2);
if (result) {
- pr_debug("%s:%d: lv1_get_repository_node_value failed: %s\n",
+ pr_warn("%s:%d: lv1_read_repository_node failed: %s\n",
__func__, __LINE__, ps3_result(result));
dump_node_name(lpar_id, n1, n2, n3, n4);
return -ENOENT;
@@ -149,10 +149,10 @@ static int read_node(unsigned int lpar_id, u64 n1, u64 n2, u64 n3, u64 n4,
*_v2 = v2;
if (v1 && !_v1)
- pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n",
+ pr_devel("%s:%d: warning: discarding non-zero v1: %016llx\n",
__func__, __LINE__, v1);
if (v2 && !_v2)
- pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n",
+ pr_devel("%s:%d: warning: discarding non-zero v2: %016llx\n",
__func__, __LINE__, v2);
return 0;
@@ -323,16 +323,16 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
if (result) {
- pr_debug("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
+ pr_devel("%s:%d read_bus_num_dev failed\n", __func__, __LINE__);
return result;
}
- pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
+ pr_devel("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
__func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
num_dev);
if (tmp.dev_index >= num_dev) {
- pr_debug("%s:%d: no device found\n", __func__, __LINE__);
+ pr_devel("%s:%d: no device found\n", __func__, __LINE__);
return -ENODEV;
}
@@ -340,7 +340,7 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
&tmp.dev_type);
if (result) {
- pr_debug("%s:%d read_dev_type failed\n", __func__, __LINE__);
+ pr_devel("%s:%d read_dev_type failed\n", __func__, __LINE__);
return result;
}
@@ -348,12 +348,12 @@ int ps3_repository_find_device(struct ps3_repository_device *repo)
&tmp.dev_id);
if (result) {
- pr_debug("%s:%d ps3_repository_read_dev_id failed\n", __func__,
+ pr_devel("%s:%d ps3_repository_read_dev_id failed\n", __func__,
__LINE__);
return result;
}
- pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
+ pr_devel("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
__func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
*repo = tmp;
@@ -367,14 +367,14 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
struct ps3_repository_device tmp;
unsigned int num_dev;
- pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
+ pr_devel(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
bus_id, dev_id);
for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
result = ps3_repository_read_bus_id(tmp.bus_index,
&tmp.bus_id);
if (result) {
- pr_debug("%s:%u read_bus_id(%u) failed\n", __func__,
+ pr_devel("%s:%u read_bus_id(%u) failed\n", __func__,
__LINE__, tmp.bus_index);
return result;
}
@@ -382,23 +382,23 @@ int ps3_repository_find_device_by_id(struct ps3_repository_device *repo,
if (tmp.bus_id == bus_id)
goto found_bus;
- pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
+ pr_devel("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
tmp.bus_id);
}
- pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+ pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
return result;
found_bus:
result = ps3_repository_read_bus_type(tmp.bus_index, &tmp.bus_type);
if (result) {
- pr_debug("%s:%u read_bus_type(%u) failed\n", __func__,
+ pr_devel("%s:%u read_bus_type(%u) failed\n", __func__,
__LINE__, tmp.bus_index);
return result;
}
result = ps3_repository_read_bus_num_dev(tmp.bus_index, &num_dev);
if (result) {
- pr_debug("%s:%u read_bus_num_dev failed\n", __func__,
+ pr_devel("%s:%u read_bus_num_dev failed\n", __func__,
__LINE__);
return result;
}
@@ -408,7 +408,7 @@ found_bus:
tmp.dev_index,
&tmp.dev_id);
if (result) {
- pr_debug("%s:%u read_dev_id(%u:%u) failed\n", __func__,
+ pr_devel("%s:%u read_dev_id(%u:%u) failed\n", __func__,
__LINE__, tmp.bus_index, tmp.dev_index);
return result;
}
@@ -416,21 +416,21 @@ found_bus:
if (tmp.dev_id == dev_id)
goto found_dev;
- pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
+ pr_devel("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
tmp.dev_id);
}
- pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
+ pr_devel(" <- %s:%u: dev not found\n", __func__, __LINE__);
return result;
found_dev:
result = ps3_repository_read_dev_type(tmp.bus_index, tmp.dev_index,
&tmp.dev_type);
if (result) {
- pr_debug("%s:%u read_dev_type failed\n", __func__, __LINE__);
+ pr_devel("%s:%u read_dev_type failed\n", __func__, __LINE__);
return result;
}
- pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
+ pr_devel(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
__func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
tmp.dev_index, tmp.bus_id, tmp.dev_id);
*repo = tmp;
@@ -443,18 +443,18 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type,
int result = 0;
struct ps3_repository_device repo;
- pr_debug(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
+ pr_devel(" -> %s:%d: find bus_type %u\n", __func__, __LINE__, bus_type);
repo.bus_type = bus_type;
result = ps3_repository_find_bus(repo.bus_type, 0, &repo.bus_index);
if (result) {
- pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
+ pr_devel(" <- %s:%u: bus not found\n", __func__, __LINE__);
return result;
}
result = ps3_repository_read_bus_id(repo.bus_index, &repo.bus_id);
if (result) {
- pr_debug("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
+ pr_devel("%s:%d read_bus_id(%u) failed\n", __func__, __LINE__,
repo.bus_index);
return result;
}
@@ -469,13 +469,13 @@ int __devinit ps3_repository_find_devices(enum ps3_bus_type bus_type,
result = callback(&repo);
if (result) {
- pr_debug("%s:%d: abort at callback\n", __func__,
+ pr_devel("%s:%d: abort at callback\n", __func__,
__LINE__);
break;
}
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -489,7 +489,7 @@ int ps3_repository_find_bus(enum ps3_bus_type bus_type, unsigned int from,
for (i = from; i < 10; i++) {
error = ps3_repository_read_bus_type(i, &type);
if (error) {
- pr_debug("%s:%d read_bus_type failed\n",
+ pr_devel("%s:%d read_bus_type failed\n",
__func__, __LINE__);
*bus_index = UINT_MAX;
return error;
@@ -509,7 +509,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
int result = 0;
unsigned int res_index;
- pr_debug("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
+ pr_devel("%s:%d: find intr_type %u\n", __func__, __LINE__, intr_type);
*interrupt_id = UINT_MAX;
@@ -521,7 +521,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
repo->dev_index, res_index, &t, &id);
if (result) {
- pr_debug("%s:%d read_dev_intr failed\n",
+ pr_devel("%s:%d read_dev_intr failed\n",
__func__, __LINE__);
return result;
}
@@ -535,7 +535,7 @@ int ps3_repository_find_interrupt(const struct ps3_repository_device *repo,
if (res_index == 10)
return -ENODEV;
- pr_debug("%s:%d: found intr_type %u at res_index %u\n",
+ pr_devel("%s:%d: found intr_type %u at res_index %u\n",
__func__, __LINE__, intr_type, res_index);
return result;
@@ -547,7 +547,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
int result = 0;
unsigned int res_index;
- pr_debug("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
+ pr_devel("%s:%d: find reg_type %u\n", __func__, __LINE__, reg_type);
*bus_addr = *len = 0;
@@ -560,7 +560,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
repo->dev_index, res_index, &t, &a, &l);
if (result) {
- pr_debug("%s:%d read_dev_reg failed\n",
+ pr_devel("%s:%d read_dev_reg failed\n",
__func__, __LINE__);
return result;
}
@@ -575,7 +575,7 @@ int ps3_repository_find_reg(const struct ps3_repository_device *repo,
if (res_index == 10)
return -ENODEV;
- pr_debug("%s:%d: found reg_type %u at res_index %u\n",
+ pr_devel("%s:%d: found reg_type %u at res_index %u\n",
__func__, __LINE__, reg_type, res_index);
return result;
@@ -1009,7 +1009,7 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
int result = 0;
unsigned int res_index;
- pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+ pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
for (res_index = 0; res_index < 10; res_index++) {
@@ -1021,13 +1021,13 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
if (result) {
if (result != LV1_NO_ENTRY)
- pr_debug("%s:%d ps3_repository_read_dev_intr"
+ pr_devel("%s:%d ps3_repository_read_dev_intr"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
}
- pr_debug("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
+ pr_devel("%s:%d (%u:%u) intr_type %u, interrupt_id %u\n",
__func__, __LINE__, repo->bus_index, repo->dev_index,
intr_type, interrupt_id);
}
@@ -1042,18 +1042,18 @@ int ps3_repository_dump_resource_info(const struct ps3_repository_device *repo)
if (result) {
if (result != LV1_NO_ENTRY)
- pr_debug("%s:%d ps3_repository_read_dev_reg"
+ pr_devel("%s:%d ps3_repository_read_dev_reg"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
}
- pr_debug("%s:%d (%u:%u) reg_type %u, bus_addr %lxh, len %lxh\n",
+ pr_devel("%s:%d (%u:%u) reg_type %u, bus_addr %llxh, len %llxh\n",
__func__, __LINE__, repo->bus_index, repo->dev_index,
reg_type, bus_addr, len);
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -1063,22 +1063,22 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo)
unsigned int num_regions, region_index;
u64 port, blk_size, num_blocks;
- pr_debug(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
+ pr_devel(" -> %s:%d: (%u:%u)\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
result = ps3_repository_read_stor_dev_info(repo->bus_index,
repo->dev_index, &port, &blk_size, &num_blocks, &num_regions);
if (result) {
- pr_debug("%s:%d ps3_repository_read_stor_dev_info"
+ pr_devel("%s:%d ps3_repository_read_stor_dev_info"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
goto out;
}
- pr_debug("%s:%d (%u:%u): port %lu, blk_size %lu, num_blocks "
- "%lu, num_regions %u\n",
- __func__, __LINE__, repo->bus_index, repo->dev_index, port,
- blk_size, num_blocks, num_regions);
+ pr_devel("%s:%d (%u:%u): port %llu, blk_size %llu, num_blocks "
+ "%llu, num_regions %u\n",
+ __func__, __LINE__, repo->bus_index, repo->dev_index,
+ port, blk_size, num_blocks, num_regions);
for (region_index = 0; region_index < num_regions; region_index++) {
unsigned int region_id;
@@ -1088,19 +1088,20 @@ static int dump_stor_dev_info(struct ps3_repository_device *repo)
repo->dev_index, region_index, &region_id,
&region_start, &region_size);
if (result) {
- pr_debug("%s:%d ps3_repository_read_stor_dev_region"
+ pr_devel("%s:%d ps3_repository_read_stor_dev_region"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
}
- pr_debug("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
+ pr_devel("%s:%d (%u:%u) region_id %u, start %lxh, size %lxh\n",
__func__, __LINE__, repo->bus_index, repo->dev_index,
- region_id, region_start, region_size);
+ region_id, (unsigned long)region_start,
+ (unsigned long)region_size);
}
out:
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -1109,7 +1110,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
{
int result = 0;
- pr_debug(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
+ pr_devel(" -> %s:%d: bus_%u\n", __func__, __LINE__, repo->bus_index);
for (repo->dev_index = 0; repo->dev_index < num_dev;
repo->dev_index++) {
@@ -1118,7 +1119,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
repo->dev_index, &repo->dev_type);
if (result) {
- pr_debug("%s:%d ps3_repository_read_dev_type"
+ pr_devel("%s:%d ps3_repository_read_dev_type"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
break;
@@ -1128,15 +1129,15 @@ static int dump_device_info(struct ps3_repository_device *repo,
repo->dev_index, &repo->dev_id);
if (result) {
- pr_debug("%s:%d ps3_repository_read_dev_id"
+ pr_devel("%s:%d ps3_repository_read_dev_id"
" (%u:%u) failed\n", __func__, __LINE__,
repo->bus_index, repo->dev_index);
continue;
}
- pr_debug("%s:%d (%u:%u): dev_type %u, dev_id %lu\n", __func__,
+ pr_devel("%s:%d (%u:%u): dev_type %u, dev_id %lu\n", __func__,
__LINE__, repo->bus_index, repo->dev_index,
- repo->dev_type, repo->dev_id);
+ repo->dev_type, (unsigned long)repo->dev_id);
ps3_repository_dump_resource_info(repo);
@@ -1144,7 +1145,7 @@ static int dump_device_info(struct ps3_repository_device *repo,
dump_stor_dev_info(repo);
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
@@ -1153,7 +1154,7 @@ int ps3_repository_dump_bus_info(void)
int result = 0;
struct ps3_repository_device repo;
- pr_debug(" -> %s:%d\n", __func__, __LINE__);
+ pr_devel(" -> %s:%d\n", __func__, __LINE__);
memset(&repo, 0, sizeof(repo));
@@ -1164,7 +1165,7 @@ int ps3_repository_dump_bus_info(void)
&repo.bus_type);
if (result) {
- pr_debug("%s:%d read_bus_type(%u) failed\n",
+ pr_devel("%s:%d read_bus_type(%u) failed\n",
__func__, __LINE__, repo.bus_index);
break;
}
@@ -1173,32 +1174,32 @@ int ps3_repository_dump_bus_info(void)
&repo.bus_id);
if (result) {
- pr_debug("%s:%d read_bus_id(%u) failed\n",
+ pr_devel("%s:%d read_bus_id(%u) failed\n",
__func__, __LINE__, repo.bus_index);
continue;
}
if (repo.bus_index != repo.bus_id)
- pr_debug("%s:%d bus_index != bus_id\n",
+ pr_devel("%s:%d bus_index != bus_id\n",
__func__, __LINE__);
result = ps3_repository_read_bus_num_dev(repo.bus_index,
&num_dev);
if (result) {
- pr_debug("%s:%d read_bus_num_dev(%u) failed\n",
+ pr_devel("%s:%d read_bus_num_dev(%u) failed\n",
__func__, __LINE__, repo.bus_index);
continue;
}
- pr_debug("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
+ pr_devel("%s:%d bus_%u: bus_type %u, bus_id %lu, num_dev %u\n",
__func__, __LINE__, repo.bus_index, repo.bus_type,
- repo.bus_id, num_dev);
+ (unsigned long)repo.bus_id, num_dev);
dump_device_info(&repo, num_dev);
}
- pr_debug(" <- %s:%d\n", __func__, __LINE__);
+ pr_devel(" <- %s:%d\n", __func__, __LINE__);
return result;
}
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index e8ec1b2bfff..2d664c5a83b 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -193,10 +193,12 @@ static int ps3_set_dabr(unsigned long dabr)
static void __init ps3_setup_arch(void)
{
+ u64 tmp;
DBG(" -> %s:%d\n", __func__, __LINE__);
- lv1_get_version_info(&ps3_firmware_version.raw);
+ lv1_get_version_info(&ps3_firmware_version.raw, &tmp);
+
printk(KERN_INFO "PS3 firmware version %u.%u.%u\n",
ps3_firmware_version.major, ps3_firmware_version.minor,
ps3_firmware_version.rev);
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index efc1cd8c034..4b35166229f 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -57,7 +57,7 @@ static void ps3_smp_message_pass(int cpu, int msg)
" (%d)\n", __func__, __LINE__, cpu, msg, result);
}
-static int ps3_smp_probe(void)
+static int __init ps3_smp_probe(void)
{
int cpu;
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 451fad1c92a..e17fa1432d8 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -154,7 +154,7 @@ static unsigned long get_vas_id(void)
u64 id;
lv1_get_logical_ppe_id(&id);
- lv1_get_virtual_address_space_id_of_ppe(id, &id);
+ lv1_get_virtual_address_space_id_of_ppe(&id);
return id;
}
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c81f6bb9c10..ae7b6d41fed 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -120,3 +120,12 @@ config DTL
which are accessible through a debugfs file.
Say N if you are unsure.
+
+config PSERIES_IDLE
+ tristate "Cpuidle driver for pSeries platforms"
+ depends on CPU_IDLE
+ depends on PPC_PSERIES
+ default y
+ help
+ Select this option to enable processor idle state management
+ through cpuidle subsystem.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 3556e402cbf..236db46b407 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
obj-$(CONFIG_CMM) += cmm.o
obj-$(CONFIG_DTL) += dtl.o
obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o
+obj-$(CONFIG_PSERIES_IDLE) += processor_idle.o
ifeq ($(CONFIG_PPC_PSERIES),y)
obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index f106662f438..c9311cfdfca 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -109,7 +109,7 @@ static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long
if (opcode > MAX_HCALL_OPCODE)
return;
- h = &get_cpu_var(hcall_stats)[opcode / 4];
+ h = &__get_cpu_var(hcall_stats)[opcode / 4];
h->tb_start = mftb();
h->purr_start = mfspr(SPRN_PURR);
}
@@ -126,8 +126,6 @@ static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long
h->num_calls++;
h->tb_total += mftb() - h->tb_start;
h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
-
- put_cpu_var(hcall_stats);
}
static int __init hcall_inst_init(void)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index b719d970973..c442f2b1980 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -52,13 +52,42 @@
#include "plpar_wrappers.h"
+static void tce_invalidate_pSeries_sw(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ unsigned long start, end, inc;
+
+ start = __pa(startp);
+ end = __pa(endp);
+ inc = L1_CACHE_BYTES; /* invalidate a cacheline of TCEs at a time */
+
+ /* If this is non-zero, change the format. We shift the
+ * address and or in the magic from the device tree. */
+ if (tbl->it_busno) {
+ start <<= 12;
+ end <<= 12;
+ inc <<= 12;
+ start |= tbl->it_busno;
+ end |= tbl->it_busno;
+ }
+
+ end |= inc - 1; /* round up end to be different than start */
+
+ mb(); /* Make sure TCEs in memory are written */
+ while (start <= end) {
+ out_be64(invalidate, start);
+ start += inc;
+ }
+}
+
static int tce_build_pSeries(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
u64 proto_tce;
- u64 *tcep;
+ u64 *tcep, *tces;
u64 rpn;
proto_tce = TCE_PCI_READ; // Read allowed
@@ -66,7 +95,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
if (direction != DMA_TO_DEVICE)
proto_tce |= TCE_PCI_WRITE;
- tcep = ((u64 *)tbl->it_base) + index;
+ tces = tcep = ((u64 *)tbl->it_base) + index;
while (npages--) {
/* can't move this out since we might cross MEMBLOCK boundary */
@@ -76,18 +105,24 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index,
uaddr += TCE_PAGE_SIZE;
tcep++;
}
+
+ if (tbl->it_type == TCE_PCI_SWINV_CREATE)
+ tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
return 0;
}
static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages)
{
- u64 *tcep;
+ u64 *tcep, *tces;
- tcep = ((u64 *)tbl->it_base) + index;
+ tces = tcep = ((u64 *)tbl->it_base) + index;
while (npages--)
*(tcep++) = 0;
+
+ if (tbl->it_type == TCE_PCI_SWINV_FREE)
+ tce_invalidate_pSeries_sw(tbl, tces, tcep - 1);
}
static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
@@ -425,7 +460,7 @@ static void iommu_table_setparms(struct pci_controller *phb,
struct iommu_table *tbl)
{
struct device_node *node;
- const unsigned long *basep;
+ const unsigned long *basep, *sw_inval;
const u32 *sizep;
node = phb->dn;
@@ -462,6 +497,22 @@ static void iommu_table_setparms(struct pci_controller *phb,
tbl->it_index = 0;
tbl->it_blocksize = 16;
tbl->it_type = TCE_PCI;
+
+ sw_inval = of_get_property(node, "linux,tce-sw-invalidate-info", NULL);
+ if (sw_inval) {
+ /*
+ * This property contains information on how to
+ * invalidate the TCE entry. The first property is
+ * the base MMIO address used to invalidate entries.
+ * The second property tells us the format of the TCE
+ * invalidate (whether it needs to be shifted) and
+ * some magic routing info to add to our invalidate
+ * command.
+ */
+ tbl->it_index = (unsigned long) ioremap(sw_inval[0], 8);
+ tbl->it_busno = sw_inval[1]; /* overload this with magic */
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ }
}
/*
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 52d429be6c7..948e0e3b354 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -554,6 +554,7 @@ void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
goto out;
(*depth)++;
+ preempt_disable();
trace_hcall_entry(opcode, args);
if (opcode == H_CEDE)
rcu_idle_enter();
@@ -580,6 +581,7 @@ void __trace_hcall_exit(long opcode, unsigned long retval,
if (opcode == H_CEDE)
rcu_idle_exit();
trace_hcall_exit(opcode, retval, retbuf);
+ preempt_enable();
(*depth)--;
out:
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index a76b22844d1..330a57b7c17 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -625,6 +625,8 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
{
static unsigned int oops_count = 0;
static bool panicking = false;
+ static DEFINE_SPINLOCK(lock);
+ unsigned long flags;
size_t text_len;
unsigned int err_type = ERR_TYPE_KERNEL_PANIC_GZ;
int rc = -1;
@@ -655,6 +657,9 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
if (clobbering_unread_rtas_event())
return;
+ if (!spin_trylock_irqsave(&lock, flags))
+ return;
+
if (big_oops_buf) {
text_len = capture_last_msgs(old_msgs, old_len,
new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
@@ -670,4 +675,6 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
(void) nvram_write_os_partition(&oops_log_partition, oops_buf,
(int) (sizeof(*oops_len) + *oops_len), err_type, ++oops_count);
+
+ spin_unlock_irqrestore(&lock, flags);
}
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
new file mode 100644
index 00000000000..085fd3f45ad
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -0,0 +1,329 @@
+/*
+ * processor_idle - idle state cpuidle driver.
+ * Adapted from drivers/idle/intel_idle.c and
+ * drivers/acpi/processor_idle.c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu.h>
+
+#include <asm/paca.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+
+#include "plpar_wrappers.h"
+#include "pseries.h"
+
+struct cpuidle_driver pseries_idle_driver = {
+ .name = "pseries_idle",
+ .owner = THIS_MODULE,
+};
+
+#define MAX_IDLE_STATE_COUNT 2
+
+static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
+static struct cpuidle_device __percpu *pseries_cpuidle_devices;
+static struct cpuidle_state *cpuidle_state_table;
+
+void update_smt_snooze_delay(int snooze)
+{
+ struct cpuidle_driver *drv = cpuidle_get_driver();
+ if (drv)
+ drv->states[0].target_residency = snooze;
+}
+
+static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+{
+
+ *kt_before = ktime_get_real();
+ *in_purr = mfspr(SPRN_PURR);
+ /*
+ * Indicate to the HV that we are idle. Now would be
+ * a good time to find other work to dispatch.
+ */
+ get_lppaca()->idle = 1;
+}
+
+static inline s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+{
+ get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
+ get_lppaca()->idle = 0;
+
+ return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+}
+
+static int snooze_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+ unsigned long start_snooze;
+ long snooze = drv->states[0].target_residency;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ if (snooze) {
+ start_snooze = get_tb() + snooze * tb_ticks_per_usec;
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ while ((snooze < 0) || (get_tb() < start_snooze)) {
+ if (need_resched() || cpu_is_offline(dev->cpu))
+ goto out;
+ ppc64_runlatch_off();
+ HMT_low();
+ HMT_very_low();
+ }
+
+ HMT_medium();
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb();
+ local_irq_disable();
+ }
+
+out:
+ HMT_medium();
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+static int dedicated_cede_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+ get_lppaca()->donate_dedicated_cpu = 1;
+
+ ppc64_runlatch_off();
+ HMT_medium();
+ cede_processor();
+
+ get_lppaca()->donate_dedicated_cpu = 0;
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+static int shared_cede_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ unsigned long in_purr;
+ ktime_t kt_before;
+
+ idle_loop_prolog(&in_purr, &kt_before);
+
+ /*
+ * Yield the processor to the hypervisor. We return if
+ * an external interrupt occurs (which are driven prior
+ * to returning here) or if a prod occurs from another
+ * processor. When returning here, external interrupts
+ * are enabled.
+ */
+ cede_processor();
+
+ dev->last_residency =
+ (int)idle_loop_epilog(in_purr, kt_before);
+ return index;
+}
+
+/*
+ * States for dedicated partition case.
+ */
+static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Snooze */
+ .name = "snooze",
+ .desc = "snooze",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &snooze_loop },
+ { /* CEDE */
+ .name = "CEDE",
+ .desc = "CEDE",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 10,
+ .enter = &dedicated_cede_loop },
+};
+
+/*
+ * States for shared partition case.
+ */
+static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Shared Cede */
+ .name = "Shared Cede",
+ .desc = "Shared Cede",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &shared_cede_loop },
+};
+
+int pseries_notify_cpuidle_add_cpu(int cpu)
+{
+ struct cpuidle_device *dev =
+ per_cpu_ptr(pseries_cpuidle_devices, cpu);
+ if (dev && cpuidle_get_driver()) {
+ cpuidle_disable_device(dev);
+ cpuidle_enable_device(dev);
+ }
+ return 0;
+}
+
+/*
+ * pseries_cpuidle_driver_init()
+ */
+static int pseries_cpuidle_driver_init(void)
+{
+ int idle_state;
+ struct cpuidle_driver *drv = &pseries_idle_driver;
+
+ drv->state_count = 0;
+
+ for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) {
+
+ if (idle_state > max_idle_state)
+ break;
+
+ /* is the state not enabled? */
+ if (cpuidle_state_table[idle_state].enter == NULL)
+ continue;
+
+ drv->states[drv->state_count] = /* structure copy */
+ cpuidle_state_table[idle_state];
+
+ if (cpuidle_state_table == dedicated_states)
+ drv->states[drv->state_count].target_residency =
+ __get_cpu_var(smt_snooze_delay);
+
+ drv->state_count += 1;
+ }
+
+ return 0;
+}
+
+/* pseries_idle_devices_uninit(void)
+ * unregister cpuidle devices and de-allocate memory
+ */
+static void pseries_idle_devices_uninit(void)
+{
+ int i;
+ struct cpuidle_device *dev;
+
+ for_each_possible_cpu(i) {
+ dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(pseries_cpuidle_devices);
+ return;
+}
+
+/* pseries_idle_devices_init()
+ * allocate, initialize and register cpuidle device
+ */
+static int pseries_idle_devices_init(void)
+{
+ int i;
+ struct cpuidle_driver *drv = &pseries_idle_driver;
+ struct cpuidle_device *dev;
+
+ pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (pseries_cpuidle_devices == NULL)
+ return -ENOMEM;
+
+ for_each_possible_cpu(i) {
+ dev = per_cpu_ptr(pseries_cpuidle_devices, i);
+ dev->state_count = drv->state_count;
+ dev->cpu = i;
+ if (cpuidle_register_device(dev)) {
+ printk(KERN_DEBUG \
+ "cpuidle_register_device %d failed!\n", i);
+ return -EIO;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * pseries_idle_probe()
+ * Choose state table for shared versus dedicated partition
+ */
+static int pseries_idle_probe(void)
+{
+
+ if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+ return -ENODEV;
+
+ if (cpuidle_disable != IDLE_NO_OVERRIDE)
+ return -ENODEV;
+
+ if (max_idle_state == 0) {
+ printk(KERN_DEBUG "pseries processor idle disabled.\n");
+ return -EPERM;
+ }
+
+ if (get_lppaca()->shared_proc)
+ cpuidle_state_table = shared_states;
+ else
+ cpuidle_state_table = dedicated_states;
+
+ return 0;
+}
+
+static int __init pseries_processor_idle_init(void)
+{
+ int retval;
+
+ retval = pseries_idle_probe();
+ if (retval)
+ return retval;
+
+ pseries_cpuidle_driver_init();
+ retval = cpuidle_register_driver(&pseries_idle_driver);
+ if (retval) {
+ printk(KERN_DEBUG "Registration of pseries driver failed.\n");
+ return retval;
+ }
+
+ retval = pseries_idle_devices_init();
+ if (retval) {
+ pseries_idle_devices_uninit();
+ cpuidle_unregister_driver(&pseries_idle_driver);
+ return retval;
+ }
+
+ printk(KERN_DEBUG "pseries_idle_driver registered\n");
+
+ return 0;
+}
+
+static void __exit pseries_processor_idle_exit(void)
+{
+
+ pseries_idle_devices_uninit();
+ cpuidle_unregister_driver(&pseries_idle_driver);
+
+ return;
+}
+
+module_init(pseries_processor_idle_init);
+module_exit(pseries_processor_idle_exit);
+
+MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("Cpuidle driver for POWER");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 24c7162f11d..9a3dda07566 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -57,4 +57,7 @@ extern struct device_node *dlpar_configure_connector(u32);
extern int dlpar_attach_node(struct device_node *);
extern int dlpar_detach_node(struct device_node *);
+/* Snooze Delay, pseries_idle */
+DECLARE_PER_CPU(long, smt_snooze_delay);
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index c3408ca8855..f79f1278dfc 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,6 +39,7 @@
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
+#include <linux/cpuidle.h>
#include <asm/mmu.h>
#include <asm/processor.h>
@@ -74,9 +75,6 @@ EXPORT_SYMBOL(CMO_PageSize);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
-static void pseries_shared_idle_sleep(void);
-static void pseries_dedicated_idle_sleep(void);
-
static struct device_node *pSeries_mpic_node;
static void pSeries_show_cpuinfo(struct seq_file *m)
@@ -192,8 +190,7 @@ static void __init pseries_mpic_init_IRQ(void)
BUG_ON(openpic_addr == 0);
/* Setup the openpic driver */
- mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
- MPIC_PRIMARY,
+ mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, 0,
16, 250, /* isu size, irq count */
" MPIC ");
BUG_ON(mpic == NULL);
@@ -352,8 +349,25 @@ static int alloc_dispatch_log_kmem_cache(void)
}
early_initcall(alloc_dispatch_log_kmem_cache);
+static void pSeries_idle(void)
+{
+ /* This would call on the cpuidle framework, and the back-end pseries
+ * driver to go to idle states
+ */
+ if (cpuidle_idle_call()) {
+ /* On error, execute default handler
+ * to go into low thread priority and possibly
+ * low power mode.
+ */
+ HMT_low();
+ HMT_very_low();
+ }
+}
+
static void __init pSeries_setup_arch(void)
{
+ panic_timeout = 10;
+
/* Discover PIC type and setup ppc_md accordingly */
pseries_discover_pic();
@@ -374,18 +388,9 @@ static void __init pSeries_setup_arch(void)
pSeries_nvram_init();
- /* Choose an idle loop */
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
vpa_init(boot_cpuid);
- if (get_lppaca()->shared_proc) {
- printk(KERN_DEBUG "Using shared processor idle loop\n");
- ppc_md.power_save = pseries_shared_idle_sleep;
- } else {
- printk(KERN_DEBUG "Using dedicated idle loop\n");
- ppc_md.power_save = pseries_dedicated_idle_sleep;
- }
- } else {
- printk(KERN_DEBUG "Using default idle loop\n");
+ ppc_md.power_save = pSeries_idle;
}
if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -586,80 +591,6 @@ static int __init pSeries_probe(void)
return 1;
}
-
-DECLARE_PER_CPU(long, smt_snooze_delay);
-
-static void pseries_dedicated_idle_sleep(void)
-{
- unsigned int cpu = smp_processor_id();
- unsigned long start_snooze;
- unsigned long in_purr, out_purr;
- long snooze = __get_cpu_var(smt_snooze_delay);
-
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
- get_lppaca()->donate_dedicated_cpu = 1;
- in_purr = mfspr(SPRN_PURR);
-
- /*
- * We come in with interrupts disabled, and need_resched()
- * has been checked recently. If we should poll for a little
- * while, do so.
- */
- if (snooze) {
- start_snooze = get_tb() + snooze * tb_ticks_per_usec;
- local_irq_enable();
- set_thread_flag(TIF_POLLING_NRFLAG);
-
- while ((snooze < 0) || (get_tb() < start_snooze)) {
- if (need_resched() || cpu_is_offline(cpu))
- goto out;
- ppc64_runlatch_off();
- HMT_low();
- HMT_very_low();
- }
-
- HMT_medium();
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb();
- local_irq_disable();
- if (need_resched() || cpu_is_offline(cpu))
- goto out;
- }
-
- cede_processor();
-
-out:
- HMT_medium();
- out_purr = mfspr(SPRN_PURR);
- get_lppaca()->wait_state_cycles += out_purr - in_purr;
- get_lppaca()->donate_dedicated_cpu = 0;
- get_lppaca()->idle = 0;
-}
-
-static void pseries_shared_idle_sleep(void)
-{
- /*
- * Indicate to the HV that we are idle. Now would be
- * a good time to find other work to dispatch.
- */
- get_lppaca()->idle = 1;
-
- /*
- * Yield the processor to the hypervisor. We return if
- * an external interrupt occurs (which are driven prior
- * to returning here) or if a prod occurs from another
- * processor. When returning here, external interrupts
- * are enabled.
- */
- cede_processor();
-
- get_lppaca()->idle = 0;
-}
-
static int pSeries_pci_probe_mode(struct pci_bus *bus)
{
if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 26e93fd4c62..bbc3c42f673 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -148,6 +148,7 @@ static void __devinit smp_xics_setup_cpu(int cpu)
set_cpu_current_state(cpu, CPU_STATE_ONLINE);
set_default_offline_state(cpu);
#endif
+ pseries_notify_cpuidle_add_cpu(cpu);
}
static int __devinit smp_pSeries_kick_cpu(int nr)
diff --git a/arch/powerpc/platforms/wsp/Kconfig b/arch/powerpc/platforms/wsp/Kconfig
index bd560c786ed..57d22a2f4ba 100644
--- a/arch/powerpc/platforms/wsp/Kconfig
+++ b/arch/powerpc/platforms/wsp/Kconfig
@@ -1,20 +1,28 @@
config PPC_WSP
bool
select PPC_A2
+ select GENERIC_TBSYNC
+ select PPC_ICSWX
select PPC_SCOM
select PPC_XICS
select PPC_ICP_NATIVE
select PCI
select PPC_IO_WORKAROUNDS if PCI
select PPC_INDIRECT_PIO if PCI
+ select PPC_WSP_COPRO
default n
menu "WSP platform selection"
depends on PPC_BOOK3E_64
config PPC_PSR2
- bool "PSR-2 platform"
- select GENERIC_TBSYNC
+ bool "PowerEN System Reference Platform 2"
+ select EPAPR_BOOT
+ select PPC_WSP
+ default y
+
+config PPC_CHROMA
+ bool "PowerEN PCIe Chroma Card"
select EPAPR_BOOT
select PPC_WSP
default y
diff --git a/arch/powerpc/platforms/wsp/Makefile b/arch/powerpc/platforms/wsp/Makefile
index a1486b436f0..56817ac98fc 100644
--- a/arch/powerpc/platforms/wsp/Makefile
+++ b/arch/powerpc/platforms/wsp/Makefile
@@ -1,8 +1,10 @@
ccflags-y += -mno-minimal-toc
-obj-y += setup.o ics.o
-obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
+obj-y += setup.o ics.o wsp.o
+obj-$(CONFIG_PPC_PSR2) += psr2.o
+obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o
+obj-$(CONFIG_PPC_WSP) += opb_pic.o
obj-$(CONFIG_PPC_WSP) += scom_wsp.o
obj-$(CONFIG_SMP) += smp.o scom_smp.o
obj-$(CONFIG_PCI) += wsp_pci.o
-obj-$(CONFIG_PCI_MSI) += msi.o \ No newline at end of file
+obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/arch/powerpc/platforms/wsp/chroma.c b/arch/powerpc/platforms/wsp/chroma.c
new file mode 100644
index 00000000000..ca6fa26f6e6
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/chroma.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+void __init chroma_setup_arch(void)
+{
+ wsp_setup_arch();
+ wsp_setup_h8();
+
+}
+
+static int __init chroma_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(chroma_md) {
+ .name = "Chroma PCIe",
+ .probe = chroma_probe,
+ .setup_arch = chroma_setup_arch,
+ .restart = wsp_h8_restart,
+ .power_off = wsp_h8_power_off,
+ .halt = wsp_halt,
+ .calibrate_decr = generic_calibrate_decr,
+ .init_IRQ = wsp_setup_irq,
+ .progress = udbg_progress,
+ .power_save = book3e_idle,
+};
+
+machine_arch_initcall(chroma_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/h8.c b/arch/powerpc/platforms/wsp/h8.c
new file mode 100644
index 00000000000..d18e6cc19df
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/h8.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+#include "wsp.h"
+
+/*
+ * The UART connection to the H8 is over ttyS1 which is just a 16550.
+ * We assume that FW has it setup right and no one messes with it.
+ */
+
+
+static u8 __iomem *h8;
+
+#define RBR 0 /* Receiver Buffer Register */
+#define THR 0 /* Transmitter Holding Register */
+#define LSR 5 /* Line Status Register */
+#define LSR_DR 0x01 /* LSR value for Data-Ready */
+#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */
+static void wsp_h8_putc(int c)
+{
+ u8 lsr;
+
+ do {
+ lsr = readb(h8 + LSR);
+ } while ((lsr & LSR_THRE) != LSR_THRE);
+ writeb(c, h8 + THR);
+}
+
+static int wsp_h8_getc(void)
+{
+ u8 lsr;
+
+ do {
+ lsr = readb(h8 + LSR);
+ } while ((lsr & LSR_DR) != LSR_DR);
+
+ return readb(h8 + RBR);
+}
+
+static void wsp_h8_puts(const char *s, int sz)
+{
+ int i;
+
+ for (i = 0; i < sz; i++) {
+ wsp_h8_putc(s[i]);
+
+ /* no flow control so wait for echo */
+ wsp_h8_getc();
+ }
+ wsp_h8_putc('\r');
+ wsp_h8_putc('\n');
+}
+
+static void wsp_h8_terminal_cmd(const char *cmd, int sz)
+{
+ hard_irq_disable();
+ wsp_h8_puts(cmd, sz);
+ /* should never return, but just in case */
+ for (;;)
+ continue;
+}
+
+
+void wsp_h8_restart(char *cmd)
+{
+ static const char restart[] = "warm-reset";
+
+ (void)cmd;
+ wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
+}
+
+void wsp_h8_power_off(void)
+{
+ static const char off[] = "power-off";
+
+ wsp_h8_terminal_cmd(off, sizeof(off) - 1);
+}
+
+static void __iomem *wsp_h8_getaddr(void)
+{
+ struct device_node *aliases;
+ struct device_node *uart;
+ struct property *path;
+ void __iomem *va = NULL;
+
+ /*
+ * there is nothing in the devtree to tell us which is mapped
+ * to the H8, but se know it is the second serial port.
+ */
+
+ aliases = of_find_node_by_path("/aliases");
+ if (aliases == NULL)
+ return NULL;
+
+ path = of_find_property(aliases, "serial1", NULL);
+ if (path == NULL)
+ goto out;
+
+ uart = of_find_node_by_path(path->value);
+ if (uart == NULL)
+ goto out;
+
+ va = of_iomap(uart, 0);
+
+ /* remove it so no one messes with it */
+ of_detach_node(uart);
+ of_node_put(uart);
+
+out:
+ of_node_put(aliases);
+
+ return va;
+}
+
+void __init wsp_setup_h8(void)
+{
+ h8 = wsp_h8_getaddr();
+
+ /* Devtree change? lets hard map it anyway */
+ if (h8 == NULL) {
+ pr_warn("UART to H8 could not be found");
+ h8 = ioremap(0xffc0008000ULL, 0x100);
+ }
+}
diff --git a/arch/powerpc/platforms/wsp/opb_pic.c b/arch/powerpc/platforms/wsp/opb_pic.c
index be05631a3c1..19f353dfcd0 100644
--- a/arch/powerpc/platforms/wsp/opb_pic.c
+++ b/arch/powerpc/platforms/wsp/opb_pic.c
@@ -320,7 +320,8 @@ void __init opb_pic_init(void)
}
/* Attach opb interrupt handler to new virtual IRQ */
- rc = request_irq(virq, opb_irq_handler, 0, "OPB LS Cascade", opb);
+ rc = request_irq(virq, opb_irq_handler, IRQF_NO_THREAD,
+ "OPB LS Cascade", opb);
if (rc) {
printk("opb: request_irq failed: %d\n", rc);
continue;
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
index 166f2e4b4be..0c1ae06d0be 100644
--- a/arch/powerpc/platforms/wsp/psr2.c
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -14,10 +14,10 @@
#include <linux/mm.h>
#include <linux/of.h>
#include <linux/smp.h>
+#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/system.h>
-#include <asm/time.h>
#include <asm/udbg.h>
#include "ics.h"
@@ -27,7 +27,8 @@
static void psr2_spin(void)
{
hard_irq_disable();
- for (;;) ;
+ for (;;)
+ continue;
}
static void psr2_restart(char *cmd)
@@ -35,65 +36,32 @@ static void psr2_restart(char *cmd)
psr2_spin();
}
-static int psr2_probe_devices(void)
-{
- struct device_node *np;
-
- /* Our RTC is a ds1500. It seems to be programatically compatible
- * with the ds1511 for which we have a driver so let's use that
- */
- np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
- if (np != NULL) {
- struct resource res;
- if (of_address_to_resource(np, 0, &res) == 0)
- platform_device_register_simple("ds1511", 0, &res, 1);
- }
- return 0;
-}
-machine_arch_initcall(psr2_md, psr2_probe_devices);
-
-static void __init psr2_setup_arch(void)
-{
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- scom_init_wsp();
-
- /* Setup SMP callback */
-#ifdef CONFIG_SMP
- a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
- wsp_setup_pci();
-#endif
-
-}
-
static int __init psr2_probe(void)
{
unsigned long root = of_get_flat_dt_root();
+ if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
+ /* chroma systems also claim they are psr2s */
+ return 0;
+ }
+
if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
return 0;
return 1;
}
-static void __init psr2_init_irq(void)
-{
- wsp_init_irq();
- opb_pic_init();
-}
-
define_machine(psr2_md) {
.name = "PSR2 A2",
.probe = psr2_probe,
- .setup_arch = psr2_setup_arch,
+ .setup_arch = wsp_setup_arch,
.restart = psr2_restart,
.power_off = psr2_spin,
.halt = psr2_spin,
.calibrate_decr = generic_calibrate_decr,
- .init_IRQ = psr2_init_irq,
+ .init_IRQ = wsp_setup_irq,
.progress = udbg_progress,
.power_save = book3e_idle,
};
+
+machine_arch_initcall(psr2_md, wsp_probe_devices);
diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
new file mode 100644
index 00000000000..d25cc96c21b
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+
+#include <asm/scom.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+#define WSP_SOC_COMPATIBLE "ibm,wsp-soc"
+#define PBIC_COMPATIBLE "ibm,wsp-pbic"
+#define COPRO_COMPATIBLE "ibm,wsp-coprocessor"
+
+static int __init wsp_probe_buses(void)
+{
+ static __initdata struct of_device_id bus_ids[] = {
+ /*
+ * every node in between needs to be here or you won't
+ * find it
+ */
+ { .compatible = WSP_SOC_COMPATIBLE, },
+ { .compatible = PBIC_COMPATIBLE, },
+ { .compatible = COPRO_COMPATIBLE, },
+ {},
+ };
+ of_platform_bus_probe(NULL, bus_ids, NULL);
+
+ return 0;
+}
+
+void __init wsp_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ scom_init_wsp();
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ a2_setup_smp();
+#endif
+#ifdef CONFIG_PCI
+ wsp_setup_pci();
+#endif
+}
+
+void __init wsp_setup_irq(void)
+{
+ wsp_init_irq();
+ opb_pic_init();
+}
+
+
+int __init wsp_probe_devices(void)
+{
+ struct device_node *np;
+
+ /* Our RTC is a ds1500. It seems to be programatically compatible
+ * with the ds1511 for which we have a driver so let's use that
+ */
+ np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+ if (np != NULL) {
+ struct resource res;
+ if (of_address_to_resource(np, 0, &res) == 0)
+ platform_device_register_simple("ds1511", 0, &res, 1);
+ }
+
+ wsp_probe_buses();
+
+ return 0;
+}
+
+void wsp_halt(void)
+{
+ u64 val;
+ scom_map_t m;
+ struct device_node *dn;
+ struct device_node *mine;
+ struct device_node *me;
+
+ me = of_get_cpu_node(smp_processor_id(), NULL);
+ mine = scom_find_parent(me);
+
+ /* This will halt all the A2s but not power off the chip */
+ for_each_node_with_property(dn, "scom-controller") {
+ if (dn == mine)
+ continue;
+ m = scom_map(dn, 0, 1);
+
+ /* read-modify-write it so the HW probe does not get
+ * confused */
+ val = scom_read(m, 0);
+ val |= 1;
+ scom_write(m, 0, val);
+ scom_unmap(m);
+ }
+ m = scom_map(mine, 0, 1);
+ val = scom_read(m, 0);
+ val |= 1;
+ scom_write(m, 0, val);
+ /* should never return */
+ scom_unmap(m);
+}
diff --git a/arch/powerpc/platforms/wsp/wsp.h b/arch/powerpc/platforms/wsp/wsp.h
index 33479818f62..10c1d1fff36 100644
--- a/arch/powerpc/platforms/wsp/wsp.h
+++ b/arch/powerpc/platforms/wsp/wsp.h
@@ -6,15 +6,25 @@
/* Devtree compatible strings for major devices */
#define PCIE_COMPATIBLE "ibm,wsp-pciex"
+extern void wsp_setup_arch(void);
+extern void wsp_setup_irq(void);
+extern int wsp_probe_devices(void);
+extern void wsp_halt(void);
+
extern void wsp_setup_pci(void);
extern void scom_init_wsp(void);
extern void a2_setup_smp(void);
extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
struct device_node *np);
-int smp_a2_cpu_bootable(unsigned int nr);
-int __devinit smp_a2_kick_cpu(int nr);
+extern int smp_a2_cpu_bootable(unsigned int nr);
+extern int __devinit smp_a2_kick_cpu(int nr);
+
+extern void opb_pic_init(void);
-void opb_pic_init(void);
+/* chroma specific managment */
+extern void wsp_h8_restart(char *cmd);
+extern void wsp_h8_power_off(void);
+extern void __init wsp_setup_h8(void);
#endif /* __WSP_H */
diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl
index d2571096c3e..7f5b8380886 100755
--- a/arch/powerpc/relocs_check.pl
+++ b/arch/powerpc/relocs_check.pl
@@ -32,8 +32,18 @@ while (<FD>) {
next if (!/\s+R_/);
# These relocations are okay
- next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
- /R_PPC64_ADDR64\s+mach_/);
+ # On PPC64:
+ # R_PPC64_RELATIVE, R_PPC64_NONE, R_PPC64_ADDR64
+ # On PPC:
+ # R_PPC_RELATIVE, R_PPC_ADDR16_HI,
+ # R_PPC_ADDR16_HA,R_PPC_ADDR16_LO,
+ # R_PPC_NONE
+
+ next if (/\bR_PPC64_RELATIVE\b/ or /\bR_PPC64_NONE\b/ or
+ /\bR_PPC64_ADDR64\s+mach_/);
+ next if (/\bR_PPC_ADDR16_LO\b/ or /\bR_PPC_ADDR16_HI\b/ or
+ /\bR_PPC_ADDR16_HA\b/ or /\bR_PPC_RELATIVE\b/ or
+ /\bR_PPC_NONE\b/);
# If we see this type of relcoation it's an idication that
# we /may/ be using an old version of binutils.
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 84e13253aec..5e37b471786 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -17,10 +17,11 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
+obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
-obj-$(CONFIG_FSL_RIO) += fsl_rio.o
+obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c
new file mode 100644
index 00000000000..b31f19f6103
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_ifc.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc
+ *
+ * Freescale Integrated Flash Controller
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/fsl_ifc.h>
+
+struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
+
+/*
+ * convert_ifc_address - convert the base address
+ * @addr_base: base address of the memory bank
+ */
+unsigned int convert_ifc_address(phys_addr_t addr_base)
+{
+ return addr_base & CSPR_BA;
+}
+EXPORT_SYMBOL(convert_ifc_address);
+
+/*
+ * fsl_ifc_find - find IFC bank
+ * @addr_base: base address of the memory bank
+ *
+ * This function walks IFC banks comparing "Base address" field of the CSPR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_ifc_find(phys_addr_t addr_base)
+{
+ int i = 0;
+
+ if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) {
+ __be32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr);
+ if (cspr & CSPR_V && (cspr & CSPR_BA) ==
+ convert_ifc_address(addr_base))
+ return i;
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_ifc_find);
+
+static int __devinit fsl_ifc_ctrl_init(struct fsl_ifc_ctrl *ctrl)
+{
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+ /*
+ * Clear all the common status and event registers
+ */
+ if (in_be32(&ifc->cm_evter_stat) & IFC_CM_EVTER_STAT_CSER)
+ out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+
+ /* enable all error and events */
+ out_be32(&ifc->cm_evter_en, IFC_CM_EVTER_EN_CSEREN);
+
+ /* enable all error and event interrupts */
+ out_be32(&ifc->cm_evter_intr_en, IFC_CM_EVTER_INTR_EN_CSERIREN);
+ out_be32(&ifc->cm_erattr0, 0x0);
+ out_be32(&ifc->cm_erattr1, 0x0);
+
+ return 0;
+}
+
+static int fsl_ifc_ctrl_remove(struct platform_device *dev)
+{
+ struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev);
+
+ free_irq(ctrl->nand_irq, ctrl);
+ free_irq(ctrl->irq, ctrl);
+
+ irq_dispose_mapping(ctrl->nand_irq);
+ irq_dispose_mapping(ctrl->irq);
+
+ iounmap(ctrl->regs);
+
+ dev_set_drvdata(&dev->dev, NULL);
+ kfree(ctrl);
+
+ return 0;
+}
+
+/*
+ * NAND events are split between an operational interrupt which only
+ * receives OPC, and an error interrupt that receives everything else,
+ * including non-NAND errors. Whichever interrupt gets to it first
+ * records the status and wakes the wait queue.
+ */
+static DEFINE_SPINLOCK(nand_irq_lock);
+
+static u32 check_nand_stat(struct fsl_ifc_ctrl *ctrl)
+{
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ unsigned long flags;
+ u32 stat;
+
+ spin_lock_irqsave(&nand_irq_lock, flags);
+
+ stat = in_be32(&ifc->ifc_nand.nand_evter_stat);
+ if (stat) {
+ out_be32(&ifc->ifc_nand.nand_evter_stat, stat);
+ ctrl->nand_stat = stat;
+ wake_up(&ctrl->nand_wait);
+ }
+
+ spin_unlock_irqrestore(&nand_irq_lock, flags);
+
+ return stat;
+}
+
+static irqreturn_t fsl_ifc_nand_irq(int irqno, void *data)
+{
+ struct fsl_ifc_ctrl *ctrl = data;
+
+ if (check_nand_stat(ctrl))
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+
+/*
+ * NOTE: This interrupt is used to report ifc events of various kinds,
+ * such as transaction errors on the chipselects.
+ */
+static irqreturn_t fsl_ifc_ctrl_irq(int irqno, void *data)
+{
+ struct fsl_ifc_ctrl *ctrl = data;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ u32 err_axiid, err_srcid, status, cs_err, err_addr;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* read for chip select error */
+ cs_err = in_be32(&ifc->cm_evter_stat);
+ if (cs_err) {
+ dev_err(ctrl->dev, "transaction sent to IFC is not mapped to"
+ "any memory bank 0x%08X\n", cs_err);
+ /* clear the chip select error */
+ out_be32(&ifc->cm_evter_stat, IFC_CM_EVTER_STAT_CSER);
+
+ /* read error attribute registers print the error information */
+ status = in_be32(&ifc->cm_erattr0);
+ err_addr = in_be32(&ifc->cm_erattr1);
+
+ if (status & IFC_CM_ERATTR0_ERTYP_READ)
+ dev_err(ctrl->dev, "Read transaction error"
+ "CM_ERATTR0 0x%08X\n", status);
+ else
+ dev_err(ctrl->dev, "Write transaction error"
+ "CM_ERATTR0 0x%08X\n", status);
+
+ err_axiid = (status & IFC_CM_ERATTR0_ERAID) >>
+ IFC_CM_ERATTR0_ERAID_SHIFT;
+ dev_err(ctrl->dev, "AXI ID of the error"
+ "transaction 0x%08X\n", err_axiid);
+
+ err_srcid = (status & IFC_CM_ERATTR0_ESRCID) >>
+ IFC_CM_ERATTR0_ESRCID_SHIFT;
+ dev_err(ctrl->dev, "SRC ID of the error"
+ "transaction 0x%08X\n", err_srcid);
+
+ dev_err(ctrl->dev, "Transaction Address corresponding to error"
+ "ERADDR 0x%08X\n", err_addr);
+
+ ret = IRQ_HANDLED;
+ }
+
+ if (check_nand_stat(ctrl))
+ ret = IRQ_HANDLED;
+
+ return ret;
+}
+
+/*
+ * fsl_ifc_ctrl_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code allocates all of
+ * the resources needed for the controller only. The
+ * resources for the NAND banks themselves are allocated
+ * in the chip probe function.
+*/
+static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
+{
+ int ret = 0;
+
+
+ dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
+
+ fsl_ifc_ctrl_dev = kzalloc(sizeof(*fsl_ifc_ctrl_dev), GFP_KERNEL);
+ if (!fsl_ifc_ctrl_dev)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dev->dev, fsl_ifc_ctrl_dev);
+
+ /* IOMAP the entire IFC region */
+ fsl_ifc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
+ if (!fsl_ifc_ctrl_dev->regs) {
+ dev_err(&dev->dev, "failed to get memory region\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* get the Controller level irq */
+ fsl_ifc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ if (fsl_ifc_ctrl_dev->irq == NO_IRQ) {
+ dev_err(&dev->dev, "failed to get irq resource "
+ "for IFC\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ /* get the nand machine irq */
+ fsl_ifc_ctrl_dev->nand_irq =
+ irq_of_parse_and_map(dev->dev.of_node, 1);
+ if (fsl_ifc_ctrl_dev->nand_irq == NO_IRQ) {
+ dev_err(&dev->dev, "failed to get irq resource "
+ "for NAND Machine\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ fsl_ifc_ctrl_dev->dev = &dev->dev;
+
+ ret = fsl_ifc_ctrl_init(fsl_ifc_ctrl_dev);
+ if (ret < 0)
+ goto err;
+
+ init_waitqueue_head(&fsl_ifc_ctrl_dev->nand_wait);
+
+ ret = request_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_irq, IRQF_SHARED,
+ "fsl-ifc", fsl_ifc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_ifc_ctrl_dev->irq);
+ goto err_irq;
+ }
+
+ ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq, 0,
+ "fsl-ifc-nand", fsl_ifc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_ifc_ctrl_dev->nand_irq);
+ goto err_nandirq;
+ }
+
+ return 0;
+
+err_nandirq:
+ free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev);
+ irq_dispose_mapping(fsl_ifc_ctrl_dev->nand_irq);
+err_irq:
+ free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
+ irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
+err:
+ return ret;
+}
+
+static const struct of_device_id fsl_ifc_match[] = {
+ {
+ .compatible = "fsl,ifc",
+ },
+ {},
+};
+
+static struct platform_driver fsl_ifc_ctrl_driver = {
+ .driver = {
+ .name = "fsl-ifc",
+ .of_match_table = fsl_ifc_match,
+ },
+ .probe = fsl_ifc_ctrl_probe,
+ .remove = fsl_ifc_ctrl_remove,
+};
+
+module_platform_driver(fsl_ifc_ctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale Semiconductor");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller driver");
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index d5c3c90ee69..483126d7b3c 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -332,6 +332,38 @@ err:
return ret;
}
+#ifdef CONFIG_SUSPEND
+
+/* save lbc registers */
+static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
+ if (!ctrl->saved_regs)
+ return -ENOMEM;
+
+ _memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+ return 0;
+}
+
+/* restore lbc registers */
+static int fsl_lbc_resume(struct platform_device *pdev)
+{
+ struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ if (ctrl->saved_regs) {
+ _memcpy_toio(lbc, ctrl->saved_regs,
+ sizeof(struct fsl_lbc_regs));
+ kfree(ctrl->saved_regs);
+ ctrl->saved_regs = NULL;
+ }
+ return 0;
+}
+#endif /* CONFIG_SUSPEND */
+
static const struct of_device_id fsl_lbc_match[] = {
{ .compatible = "fsl,elbc", },
{ .compatible = "fsl,pq3-localbus", },
@@ -346,6 +378,10 @@ static struct platform_driver fsl_lbc_ctrl_driver = {
.of_match_table = fsl_lbc_match,
},
.probe = fsl_lbc_ctrl_probe,
+#ifdef CONFIG_SUSPEND
+ .suspend = fsl_lbc_suspend,
+ .resume = fsl_lbc_resume,
+#endif
};
static int __init fsl_lbc_init(void)
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index e5c344d336e..ecb5c1946d2 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -23,6 +23,8 @@
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
#include <asm/mpic.h>
+#include <asm/fsl_hcalls.h>
+
#include "fsl_msi.h"
#include "fsl_pci.h"
@@ -148,14 +150,49 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct device_node *np;
+ phandle phandle = 0;
int rc, hwirq = -ENOMEM;
unsigned int virq;
struct msi_desc *entry;
struct msi_msg msg;
struct fsl_msi *msi_data;
+ /*
+ * If the PCI node has an fsl,msi property, then we need to use it
+ * to find the specific MSI.
+ */
+ np = of_parse_phandle(hose->dn, "fsl,msi", 0);
+ if (np) {
+ if (of_device_is_compatible(np, "fsl,mpic-msi") ||
+ of_device_is_compatible(np, "fsl,vmpic-msi"))
+ phandle = np->phandle;
+ else {
+ dev_err(&pdev->dev,
+ "node %s has an invalid fsl,msi phandle %u\n",
+ hose->dn->full_name, np->phandle);
+ return -EINVAL;
+ }
+ }
+
list_for_each_entry(entry, &pdev->msi_list, list) {
+ /*
+ * Loop over all the MSI devices until we find one that has an
+ * available interrupt.
+ */
list_for_each_entry(msi_data, &msi_head, list) {
+ /*
+ * If the PCI node has an fsl,msi property, then we
+ * restrict our search to the corresponding MSI node.
+ * The simplest way is to skip over MSI nodes with the
+ * wrong phandle. Under the Freescale hypervisor, this
+ * has the additional benefit of skipping over MSI
+ * nodes that are not mapped in the PAMU.
+ */
+ if (phandle && (phandle != msi_data->phandle))
+ continue;
+
hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
if (hwirq >= 0)
break;
@@ -163,16 +200,14 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
if (hwirq < 0) {
rc = hwirq;
- pr_debug("%s: fail allocating msi interrupt\n",
- __func__);
+ dev_err(&pdev->dev, "could not allocate MSI interrupt\n");
goto out_free;
}
virq = irq_create_mapping(msi_data->irqhost, hwirq);
if (virq == NO_IRQ) {
- pr_debug("%s: fail mapping hwirq 0x%x\n",
- __func__, hwirq);
+ dev_err(&pdev->dev, "fail mapping hwirq %i\n", hwirq);
msi_bitmap_free_hwirqs(&msi_data->bitmap, hwirq, 1);
rc = -ENOSPC;
goto out_free;
@@ -201,6 +236,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
u32 intr_index;
u32 have_shift = 0;
struct fsl_msi_cascade_data *cascade_data;
+ unsigned int ret;
cascade_data = irq_get_handler_data(irq);
msi_data = cascade_data->msi_data;
@@ -232,6 +268,14 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
case FSL_PIC_IP_IPIC:
msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
break;
+ case FSL_PIC_IP_VMPIC:
+ ret = fh_vmpic_get_msir(virq_to_hw(irq), &msir_value);
+ if (ret) {
+ pr_err("fsl-msi: fh_vmpic_get_msir() failed for "
+ "irq %u (ret=%u)\n", irq, ret);
+ msir_value = 0;
+ }
+ break;
}
while (msir_value) {
@@ -249,6 +293,7 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
switch (msi_data->feature & FSL_PIC_IP_MASK) {
case FSL_PIC_IP_MPIC:
+ case FSL_PIC_IP_VMPIC:
chip->irq_eoi(idata);
break;
case FSL_PIC_IP_IPIC:
@@ -278,7 +323,8 @@ static int fsl_of_msi_remove(struct platform_device *ofdev)
}
if (msi->bitmap.bitmap)
msi_bitmap_free(&msi->bitmap);
- iounmap(msi->msi_regs);
+ if ((msi->feature & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC)
+ iounmap(msi->msi_regs);
kfree(msi);
return 0;
@@ -350,25 +396,37 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
goto error_out;
}
- /* Get the MSI reg base */
- err = of_address_to_resource(dev->dev.of_node, 0, &res);
- if (err) {
- dev_err(&dev->dev, "%s resource error!\n",
+ /*
+ * Under the Freescale hypervisor, the msi nodes don't have a 'reg'
+ * property. Instead, we use hypercalls to access the MSI.
+ */
+ if ((features->fsl_pic_ip & FSL_PIC_IP_MASK) != FSL_PIC_IP_VMPIC) {
+ err = of_address_to_resource(dev->dev.of_node, 0, &res);
+ if (err) {
+ dev_err(&dev->dev, "invalid resource for node %s\n",
dev->dev.of_node->full_name);
- goto error_out;
- }
+ goto error_out;
+ }
- msi->msi_regs = ioremap(res.start, resource_size(&res));
- if (!msi->msi_regs) {
- dev_err(&dev->dev, "ioremap problem failed\n");
- goto error_out;
+ msi->msi_regs = ioremap(res.start, resource_size(&res));
+ if (!msi->msi_regs) {
+ dev_err(&dev->dev, "could not map node %s\n",
+ dev->dev.of_node->full_name);
+ goto error_out;
+ }
+ msi->msiir_offset =
+ features->msiir_offset + (res.start & 0xfffff);
}
msi->feature = features->fsl_pic_ip;
msi->irqhost->host_data = msi;
- msi->msiir_offset = features->msiir_offset + (res.start & 0xfffff);
+ /*
+ * Remember the phandle, so that we can match with any PCI nodes
+ * that have an "fsl,msi" property.
+ */
+ msi->phandle = dev->dev.of_node->phandle;
rc = fsl_msi_init_allocator(msi);
if (rc) {
@@ -437,6 +495,11 @@ static const struct fsl_msi_feature ipic_msi_feature = {
.msiir_offset = 0x38,
};
+static const struct fsl_msi_feature vmpic_msi_feature = {
+ .fsl_pic_ip = FSL_PIC_IP_VMPIC,
+ .msiir_offset = 0,
+};
+
static const struct of_device_id fsl_of_msi_ids[] = {
{
.compatible = "fsl,mpic-msi",
@@ -446,6 +509,10 @@ static const struct of_device_id fsl_of_msi_ids[] = {
.compatible = "fsl,ipic-msi",
.data = (void *)&ipic_msi_feature,
},
+ {
+ .compatible = "fsl,vmpic-msi",
+ .data = (void *)&vmpic_msi_feature,
+ },
{}
};
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
index 1313abbc520..f6c646a5254 100644
--- a/arch/powerpc/sysdev/fsl_msi.h
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -13,15 +13,17 @@
#ifndef _POWERPC_SYSDEV_FSL_MSI_H
#define _POWERPC_SYSDEV_FSL_MSI_H
+#include <linux/of.h>
#include <asm/msi_bitmap.h>
#define NR_MSI_REG 8
#define IRQS_PER_MSI_REG 32
#define NR_MSI_IRQS (NR_MSI_REG * IRQS_PER_MSI_REG)
-#define FSL_PIC_IP_MASK 0x0000000F
-#define FSL_PIC_IP_MPIC 0x00000001
-#define FSL_PIC_IP_IPIC 0x00000002
+#define FSL_PIC_IP_MASK 0x0000000F
+#define FSL_PIC_IP_MPIC 0x00000001
+#define FSL_PIC_IP_IPIC 0x00000002
+#define FSL_PIC_IP_VMPIC 0x00000003
struct fsl_msi {
struct irq_host *irqhost;
@@ -36,6 +38,8 @@ struct fsl_msi {
struct msi_bitmap bitmap;
struct list_head list; /* support multiple MSI banks */
+
+ phandle phandle;
};
#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4ce547e0047..3b61e8cf342 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -65,6 +65,30 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
}
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+
+#define MAX_PHYS_ADDR_BITS 40
+static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
+
+static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+ return -EIO;
+
+ /*
+ * Fixup PCI devices that are able to DMA to above the physical
+ * address width of the SoC such that we can address any internal
+ * SoC address from across PCI if needed
+ */
+ if ((dev->bus == &pci_bus_type) &&
+ dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) {
+ set_dma_ops(dev, &dma_direct_ops);
+ set_dma_offset(dev, pci64_dma_offset);
+ }
+
+ *dev->dma_mask = dma_mask;
+ return 0;
+}
+
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
@@ -113,6 +137,8 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
char *name = hose->dn->full_name;
+ const u64 *reg;
+ int len;
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)resource_size(rsrc));
@@ -205,6 +231,33 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
/* Setup inbound mem window */
mem = memblock_end_of_DRAM();
+
+ /*
+ * The msi-address-64 property, if it exists, indicates the physical
+ * address of the MSIIR register. Normally, this register is located
+ * inside CCSR, so the ATMU that covers all of CCSR is used. But if
+ * this property exists, then we normally need to create a new ATMU
+ * for it. For now, however, we cheat. The only entity that creates
+ * this property is the Freescale hypervisor, and the address is
+ * specified in the partition configuration. Typically, the address
+ * is located in the page immediately after the end of DDR. If so, we
+ * can avoid allocating a new ATMU by extending the DDR ATMU by one
+ * page.
+ */
+ reg = of_get_property(hose->dn, "msi-address-64", &len);
+ if (reg && (len == sizeof(u64))) {
+ u64 address = be64_to_cpup(reg);
+
+ if ((address >= mem) && (address < (mem + PAGE_SIZE))) {
+ pr_info("%s: extending DDR ATMU to cover MSIIR", name);
+ mem += PAGE_SIZE;
+ } else {
+ /* TODO: Create a new ATMU for MSIIR */
+ pr_warn("%s: msi-address-64 address of %llx is "
+ "unsupported\n", name, address);
+ }
+ }
+
sz = min(mem, paddr_lo);
mem_log = __ilog2_u64(sz);
@@ -228,6 +281,37 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
hose->dma_window_base_cur = 0x00000000;
hose->dma_window_size = (resource_size_t)sz;
+
+ /*
+ * if we have >4G of memory setup second PCI inbound window to
+ * let devices that are 64-bit address capable to work w/o
+ * SWIOTLB and access the full range of memory
+ */
+ if (sz != mem) {
+ mem_log = __ilog2_u64(mem);
+
+ /* Size window up if we dont fit in exact power-of-2 */
+ if ((1ull << mem_log) != mem)
+ mem_log++;
+
+ piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1);
+
+ /* Setup inbound memory window */
+ out_be32(&pci->piw[win_idx].pitar, 0x00000000);
+ out_be32(&pci->piw[win_idx].piwbear,
+ pci64_dma_offset >> 44);
+ out_be32(&pci->piw[win_idx].piwbar,
+ pci64_dma_offset >> 12);
+ out_be32(&pci->piw[win_idx].piwar, piwar);
+
+ /*
+ * install our own dma_set_mask handler to fixup dma_ops
+ * and dma_offset
+ */
+ ppc_md.dma_set_mask = fsl_pci_dma_set_mask;
+
+ pr_info("%s: Setup 64-bit PCI DMA window\n", name);
+ }
} else {
u64 paddr = 0;
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 22ffccd8bef..a4c4f4a932d 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -10,7 +10,7 @@
* - Added Port-Write message handling
* - Added Machine Check exception handling
*
- * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang@freescale.com>
*
* Copyright 2005 MontaVista Software, Inc.
@@ -28,240 +28,33 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <asm/machdep.h>
-#include <asm/uaccess.h>
-#undef DEBUG_PW /* Port-Write debugging */
+#include "fsl_rio.h"
-/* RapidIO definition irq, which read from OF-tree */
-#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
-#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
-#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
-#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
-
-#define IPWSR_CLEAR 0x98
-#define OMSR_CLEAR 0x1cb3
-#define IMSR_CLEAR 0x491
-#define IDSR_CLEAR 0x91
-#define ODSR_CLEAR 0x1c00
-#define LTLEECSR_ENABLE_ALL 0xFFC000FC
-#define ESCSR_CLEAR 0x07120204
-#define IECSR_CLEAR 0x80000000
+#undef DEBUG_PW /* Port-Write debugging */
#define RIO_PORT1_EDCSR 0x0640
#define RIO_PORT2_EDCSR 0x0680
#define RIO_PORT1_IECSR 0x10130
#define RIO_PORT2_IECSR 0x101B0
-#define RIO_IM0SR 0x13064
-#define RIO_IM1SR 0x13164
-#define RIO_OM0SR 0x13004
-#define RIO_OM1SR 0x13104
-
-#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_P_MSG_REGS_OFFSET 0x11000
-#define RIO_S_MSG_REGS_OFFSET 0x13000
+
#define RIO_GCCSR 0x13c
#define RIO_ESCSR 0x158
+#define ESCSR_CLEAR 0x07120204
#define RIO_PORT2_ESCSR 0x178
#define RIO_CCSR 0x15c
-#define RIO_LTLEDCSR 0x0608
#define RIO_LTLEDCSR_IER 0x80000000
#define RIO_LTLEDCSR_PRT 0x01000000
-#define RIO_LTLEECSR 0x060c
-#define RIO_EPWISR 0x10010
+#define IECSR_CLEAR 0x80000000
#define RIO_ISR_AACR 0x10120
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
-#define RIO_MAINT_WIN_SIZE 0x400000
-#define RIO_DBELL_WIN_SIZE 0x1000
-
-#define RIO_MSG_OMR_MUI 0x00000002
-#define RIO_MSG_OSR_TE 0x00000080
-#define RIO_MSG_OSR_QOI 0x00000020
-#define RIO_MSG_OSR_QFI 0x00000010
-#define RIO_MSG_OSR_MUB 0x00000004
-#define RIO_MSG_OSR_EOMI 0x00000002
-#define RIO_MSG_OSR_QEI 0x00000001
-
-#define RIO_MSG_IMR_MI 0x00000002
-#define RIO_MSG_ISR_TE 0x00000080
-#define RIO_MSG_ISR_QFI 0x00000010
-#define RIO_MSG_ISR_DIQI 0x00000001
-
-#define RIO_IPWMR_SEN 0x00100000
-#define RIO_IPWMR_QFIE 0x00000100
-#define RIO_IPWMR_EIE 0x00000020
-#define RIO_IPWMR_CQ 0x00000002
-#define RIO_IPWMR_PWE 0x00000001
-
-#define RIO_IPWSR_QF 0x00100000
-#define RIO_IPWSR_TE 0x00000080
-#define RIO_IPWSR_QFI 0x00000010
-#define RIO_IPWSR_PWD 0x00000008
-#define RIO_IPWSR_PWB 0x00000004
-
-/* EPWISR Error match value */
-#define RIO_EPWISR_PINT1 0x80000000
-#define RIO_EPWISR_PINT2 0x40000000
-#define RIO_EPWISR_MU 0x00000002
-#define RIO_EPWISR_PW 0x00000001
-
-#define RIO_MSG_DESC_SIZE 32
-#define RIO_MSG_BUFFER_SIZE 4096
-#define RIO_MIN_TX_RING_SIZE 2
-#define RIO_MAX_TX_RING_SIZE 2048
-#define RIO_MIN_RX_RING_SIZE 2
-#define RIO_MAX_RX_RING_SIZE 2048
-
-#define DOORBELL_DMR_DI 0x00000002
-#define DOORBELL_DSR_TE 0x00000080
-#define DOORBELL_DSR_QFI 0x00000010
-#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x02
-#define DOORBELL_SID_OFFSET 0x04
-#define DOORBELL_INFO_OFFSET 0x06
-
-#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
- u32 rowtar;
- u32 rowtear;
- u32 rowbar;
- u32 pad2;
- u32 rowar;
- u32 pad3[3];
-};
-
-struct rio_msg_regs {
- u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
- u32 osr; /* 0xD_3004 - Outbound message 0 status register */
- u32 pad1;
- u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
- dequeue pointer address register */
- u32 pad2;
- u32 osar; /* 0xD_3014 - Outbound message 0 source address
- register */
- u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
- register */
- u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
- Register*/
- u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
- register */
- u32 pad3;
- u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
- enqueue pointer address register */
- u32 pad4[13];
- u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
- u32 isr; /* 0xD_3064 - Inbound message 0 status register */
- u32 pad5;
- u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
- pointer address register*/
- u32 pad6;
- u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
- pointer address register */
- u32 pad7[226];
- u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
- u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
- u32 res0[4];
- u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
- register */
- u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
- register */
- u32 res1[3];
- u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
- configuration register */
- u32 res2[12];
- u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
- u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
- u32 pad8;
- u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
- address register */
- u32 pad9;
- u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
- address register */
- u32 pad10[26];
- u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
- u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
- u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
- register */
- u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
- register */
-};
-
-struct rio_tx_desc {
- u32 res1;
- u32 saddr;
- u32 dport;
- u32 dattr;
- u32 res2;
- u32 res3;
- u32 dwcnt;
- u32 res4;
-};
-
-struct rio_dbell_ring {
- void *virt;
- dma_addr_t phys;
-};
-
-struct rio_msg_tx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_TX_RING_SIZE];
- dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
- int tx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_msg_rx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_RX_RING_SIZE];
- int rx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_port_write_msg {
- void *virt;
- dma_addr_t phys;
- u32 msg_count;
- u32 err_count;
- u32 discard_count;
-};
-
-struct rio_priv {
- struct device *dev;
- void __iomem *regs_win;
- struct rio_atmu_regs __iomem *atmu_regs;
- struct rio_atmu_regs __iomem *maint_atmu_regs;
- struct rio_atmu_regs __iomem *dbell_atmu_regs;
- void __iomem *dbell_win;
- void __iomem *maint_win;
- struct rio_msg_regs __iomem *msg_regs;
- struct rio_dbell_ring dbell_ring;
- struct rio_msg_tx_ring msg_tx_ring;
- struct rio_msg_rx_ring msg_rx_ring;
- struct rio_port_write_msg port_write_msg;
- int bellirq;
- int txirq;
- int rxirq;
- int pwirq;
- struct work_struct pw_work;
- struct kfifo pw_fifo;
- spinlock_t pw_fifo_lock;
-};
#define __fsl_read_rio_config(x, addr, err, op) \
__asm__ __volatile__( \
@@ -279,7 +72,12 @@ struct rio_priv {
: "=r" (err), "=r" (x) \
: "b" (addr), "i" (-EFAULT), "0" (err))
-static void __iomem *rio_regs_win;
+void __iomem *rio_regs_win;
+void __iomem *rmu_regs_win;
+resource_size_t rio_law_start;
+
+struct fsl_rio_dbell *dbell;
+struct fsl_rio_pw *pw;
#ifdef CONFIG_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
@@ -311,42 +109,6 @@ EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
#endif
/**
- * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
- * @mport: RapidIO master port info
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int fsl_rio_doorbell_send(struct rio_mport *mport,
- int index, u16 destid, u16 data)
-{
- struct rio_priv *priv = mport->priv;
- pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
- index, destid, data);
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(priv->dbell_win, data);
- break;
- case RIO_PHY_SERIAL:
- /* In the serial version silicons, such as MPC8548, MPC8641,
- * below operations is must be.
- */
- out_be32(&priv->msg_regs->odmr, 0x00000000);
- out_be32(&priv->msg_regs->odretcr, 0x00000004);
- out_be32(&priv->msg_regs->oddpr, destid << 16);
- out_be32(&priv->msg_regs->oddatr, data);
- out_be32(&priv->msg_regs->odmr, 0x00000001);
- break;
- }
-
- return 0;
-}
-
-/**
* fsl_local_config_read - Generate a MPC85xx local config space read
* @mport: RapidIO master port info
* @index: ID of RapdiIO interface
@@ -384,8 +146,8 @@ static int fsl_local_config_write(struct rio_mport *mport,
{
struct rio_priv *priv = mport->priv;
pr_debug
- ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
- index, offset, data);
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+ index, offset, data);
out_be32(priv->regs_win + offset, data);
return 0;
@@ -413,8 +175,9 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
u32 rval, err = 0;
pr_debug
- ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
- index, destid, hopcount, offset, len);
+ ("fsl_rio_config_read:"
+ " index %d destid %d hopcount %d offset %8.8x len %d\n",
+ index, destid, hopcount, offset, len);
/* 16MB maintenance window possible */
/* allow only aligned access to maintenance registers */
@@ -423,7 +186,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
@@ -470,8 +233,9 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
- ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
- index, destid, hopcount, offset, len, val);
+ ("fsl_rio_config_write:"
+ " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ index, destid, hopcount, offset, len, val);
/* 16MB maintenance windows possible */
/* allow only aligned access to maintenance registers */
@@ -480,7 +244,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
@@ -500,590 +264,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
return 0;
}
-/**
- * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int
-fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
- void *buffer, size_t len)
-{
- struct rio_priv *priv = mport->priv;
- u32 omr;
- struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
- + priv->msg_tx_ring.tx_slot;
- int ret = 0;
-
- pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
- "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
-
- if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Copy and clear rest of buffer */
- memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
- len);
- if (len < (RIO_MAX_MSG_SIZE - 4))
- memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
- + len, 0, RIO_MAX_MSG_SIZE - len);
-
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
-
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
- break;
- case RIO_PHY_SERIAL:
- /* Set mbox field for message, and set destid */
- desc->dport = (rdev->destid << 16) | (mbox & 0x3);
-
- /* Enable EOMI interrupt and priority */
- desc->dattr = 0x28000000;
- break;
- }
-
- /* Set transfer size aligned to next power of 2 (in double words) */
- desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
- /* Set snooping and source buffer address */
- desc->saddr = 0x00000004
- | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
-
- /* Increment enqueue pointer */
- omr = in_be32(&priv->msg_regs->omr);
- out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
- /* Go to next descriptor */
- if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
- priv->msg_tx_ring.tx_slot = 0;
-
- out:
- return ret;
-}
-
-/**
- * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_tx_handler(int irq, void *dev_instance)
-{
- int osr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- osr = in_be32(&priv->msg_regs->osr);
-
- if (osr & RIO_MSG_OSR_TE) {
- pr_info("RIO: outbound message transmission error\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_QOI) {
- pr_info("RIO: outbound message queue overflow\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32(&priv->msg_regs->odqdpar);
- int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
- slot);
-
- /* Ack the end-of-message interrupt */
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, j, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_TX_RING_SIZE) ||
- (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize shadow copy ring */
- priv->msg_tx_ring.dev_id = dev_id;
- priv->msg_tx_ring.size = entries;
-
- for (i = 0; i < priv->msg_tx_ring.size; i++) {
- priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
- if (!priv->msg_tx_ring.virt_buffer[i]) {
- rc = -ENOMEM;
- for (j = 0; j < priv->msg_tx_ring.size; j++)
- if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(priv->dev,
- RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.
- virt_buffer[j],
- priv->msg_tx_ring.
- phys_buffer[j]);
- goto out;
- }
- }
-
- /* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- &priv->msg_tx_ring.phys, GFP_KERNEL);
- if (!priv->msg_tx_ring.virt) {
- rc = -ENOMEM;
- goto out_dma;
- }
- memset(priv->msg_tx_ring.virt, 0,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- priv->msg_tx_ring.tx_slot = 0;
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
- out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
-
- /* Configure for snooping */
- out_be32(&priv->msg_regs->osar, 0x00000004);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->osr, 0x000000b3);
-
- /* Hook up outbound message handler */
- rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
- "msg_tx", (void *)mport);
- if (rc < 0)
- goto out_irq;
-
- /*
- * Configure outbound message unit
- * Snooping
- * Interrupts (all enabled, except QEIE)
- * Chaining mode
- * Disable
- */
- out_be32(&priv->msg_regs->omr, 0x00100220);
-
- /* Set number of entries */
- out_be32(&priv->msg_regs->omr,
- in_be32(&priv->msg_regs->omr) |
- ((get_bitmask_order(entries) - 2) << 12));
-
- /* Now enable the unit */
- out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
-
- out:
- return rc;
-
- out_irq:
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- out_dma:
- for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
-
- return rc;
-}
-
-/**
- * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->omr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_TX(mport), (void *)mport);
-}
-
-/**
- * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_rx_handler(int irq, void *dev_instance)
-{
- int isr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- isr = in_be32(&priv->msg_regs->isr);
-
- if (isr & RIO_MSG_ISR_TE) {
- pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
- goto out;
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (isr & RIO_MSG_ISR_DIQI) {
- /*
- * We implement *only* mailbox 0, but can receive messages
- * for any mailbox/letter to that mailbox destination. So,
- * make the callback with an unknown/invalid mailbox number
- * argument.
- */
- port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
-
- /* Ack the queueing interrupt */
- out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_RX_RING_SIZE) ||
- (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize client buffer ring */
- priv->msg_rx_ring.dev_id = dev_id;
- priv->msg_rx_ring.size = entries;
- priv->msg_rx_ring.rx_slot = 0;
- for (i = 0; i < priv->msg_rx_ring.size; i++)
- priv->msg_rx_ring.virt_buffer[i] = NULL;
-
- /* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- &priv->msg_rx_ring.phys, GFP_KERNEL);
- if (!priv->msg_rx_ring.virt) {
- rc = -ENOMEM;
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
- out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->isr, 0x00000091);
-
- /* Hook up inbound message handler */
- rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
- "msg_rx", (void *)mport);
- if (rc < 0) {
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
- goto out;
- }
-
- /*
- * Configure inbound message unit:
- * Snooping
- * 4KB max message size
- * Unmask all interrupt sources
- * Disable
- */
- out_be32(&priv->msg_regs->imr, 0x001b0060);
-
- /* Set number of queue entries */
- setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
-
- /* Now enable the unit */
- setbits32(&priv->msg_regs->imr, 0x1);
-
- out:
- return rc;
-}
-
-/**
- * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->imr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_RX(mport), (void *)mport);
-}
-
-/**
- * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
- int rc = 0;
- struct rio_priv *priv = mport->priv;
-
- pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- priv->msg_rx_ring.rx_slot);
-
- if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
- printk(KERN_ERR
- "RIO: error adding inbound buffer %d, buffer exists\n",
- priv->msg_rx_ring.rx_slot);
- rc = -EINVAL;
- goto out;
- }
-
- priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
- if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
- priv->msg_rx_ring.rx_slot = 0;
-
- out:
- return rc;
-}
-
-/**
- * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- u32 phys_buf, virt_buf;
- void *buf = NULL;
- int buf_idx;
-
- phys_buf = in_be32(&priv->msg_regs->ifqdpar);
-
- /* If no more messages, then bail out */
- if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
- goto out2;
-
- virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf
- - priv->msg_rx_ring.phys);
- buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = priv->msg_rx_ring.virt_buffer[buf_idx];
-
- if (!buf) {
- printk(KERN_ERR
- "RIO: inbound message copy failed, no buffers\n");
- goto out1;
- }
-
- /* Copy max message size, caller is expected to allocate that big */
- memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
- /* Clear the available buffer */
- priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
- out1:
- setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
-
- out2:
- return buf;
-}
-
-/**
- * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_dbell_handler(int irq, void *dev_instance)
-{
- int dsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- dsr = in_be32(&priv->msg_regs->dsr);
-
- if (dsr & DOORBELL_DSR_TE) {
- pr_info("RIO: doorbell reception error\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
- goto out;
- }
-
- if (dsr & DOORBELL_DSR_QFI) {
- pr_info("RIO: doorbell queue full\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (dsr & DOORBELL_DSR_DIQI) {
- u32 dmsg =
- (u32) priv->dbell_ring.virt +
- (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
- struct rio_dbell *dbell;
- int found = 0;
-
- pr_debug
- ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
- list_for_each_entry(dbell, &port->dbells, node) {
- if ((dbell->res->start <= DBELL_INF(dmsg)) &&
- (dbell->res->end >= DBELL_INF(dmsg))) {
- found = 1;
- break;
- }
- }
- if (found) {
- dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
- DBELL_INF(dmsg));
- } else {
- pr_debug
- ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
- }
- setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_doorbell_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Map outbound doorbell window immediately after maintenance window */
- priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE);
- if (!priv->dbell_win) {
- printk(KERN_ERR
- "RIO: unable to map outbound doorbell window\n");
- rc = -ENOMEM;
- goto out;
- }
-
- /* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
- DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
- if (!priv->dbell_ring.virt) {
- printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
- rc = -ENOMEM;
- iounmap(priv->dbell_win);
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
- out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->dsr, 0x00000091);
-
- /* Hook up doorbell handler */
- rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport);
- if (rc < 0) {
- iounmap(priv->dbell_win);
- dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
- priv->dbell_ring.virt, priv->dbell_ring.phys);
- printk(KERN_ERR
- "MPC85xx RIO: unable to request inbound doorbell irq");
- goto out;
- }
-
- /* Configure doorbells for snooping, 512 entries, and enable */
- out_be32(&priv->msg_regs->dmr, 0x00108161);
-
- out:
- return rc;
-}
-
-static void port_error_handler(struct rio_mport *port, int offset)
+void fsl_rio_port_error_handler(int offset)
{
/*XXX: Error recovery is not implemented, we just clear errors */
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
@@ -1098,263 +279,6 @@ static void port_error_handler(struct rio_mport *port, int offset)
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
}
}
-
-static void msg_unit_error_handler(struct rio_mport *port)
-{
- struct rio_priv *priv = port->priv;
-
- /*XXX: Error recovery is not implemented, we just clear errors */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
-
- out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
-
- out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
- out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
-
- out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
-}
-
-/**
- * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles port write interrupts. Parses a list of registered
- * port write event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_port_write_handler(int irq, void *dev_instance)
-{
- u32 ipwmr, ipwsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
- u32 epwisr, tmp;
-
- epwisr = in_be32(priv->regs_win + RIO_EPWISR);
- if (!(epwisr & RIO_EPWISR_PW))
- goto pw_done;
-
- ipwmr = in_be32(&priv->msg_regs->pwmr);
- ipwsr = in_be32(&priv->msg_regs->pwsr);
-
-#ifdef DEBUG_PW
- pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
- if (ipwsr & RIO_IPWSR_QF)
- pr_debug(" QF");
- if (ipwsr & RIO_IPWSR_TE)
- pr_debug(" TE");
- if (ipwsr & RIO_IPWSR_QFI)
- pr_debug(" QFI");
- if (ipwsr & RIO_IPWSR_PWD)
- pr_debug(" PWD");
- if (ipwsr & RIO_IPWSR_PWB)
- pr_debug(" PWB");
- pr_debug(" )\n");
-#endif
- /* Schedule deferred processing if PW was received */
- if (ipwsr & RIO_IPWSR_QFI) {
- /* Save PW message (if there is room in FIFO),
- * otherwise discard it.
- */
- if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
- priv->port_write_msg.msg_count++;
- kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
- RIO_PW_MSG_SIZE);
- } else {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- }
- /* Clear interrupt and issue Clear Queue command. This allows
- * another port-write to be received.
- */
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_QFI);
- out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
-
- schedule_work(&priv->pw_work);
- }
-
- if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
- priv->port_write_msg.err_count++;
- pr_debug("RIO: Port-Write Transaction Err (%d)\n",
- priv->port_write_msg.err_count);
- /* Clear Transaction Error: port-write controller should be
- * disabled when clearing this error
- */
- out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_TE);
- out_be32(&priv->msg_regs->pwmr, ipwmr);
- }
-
- if (ipwsr & RIO_IPWSR_PWD) {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD);
- }
-
-pw_done:
- if (epwisr & RIO_EPWISR_PINT1) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 0);
- }
-
- if (epwisr & RIO_EPWISR_PINT2) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 1);
- }
-
- if (epwisr & RIO_EPWISR_MU) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- msg_unit_error_handler(port);
- }
-
- return IRQ_HANDLED;
-}
-
-static void fsl_pw_dpc(struct work_struct *work)
-{
- struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
- unsigned long flags;
- u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
-
- /*
- * Process port-write messages
- */
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
- RIO_PW_MSG_SIZE)) {
- /* Process one message */
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-#ifdef DEBUG_PW
- {
- u32 i;
- pr_debug("%s : Port-Write Message:", __func__);
- for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
- if ((i%4) == 0)
- pr_debug("\n0x%02x: 0x%08x", i*4,
- msg_buffer[i]);
- else
- pr_debug(" 0x%08x", msg_buffer[i]);
- }
- pr_debug("\n");
- }
-#endif
- /* Pass the port-write message to RIO core for processing */
- rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- }
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-}
-
-/**
- * fsl_rio_pw_enable - enable/disable port-write interface init
- * @mport: Master port implementing the port write unit
- * @enable: 1=enable; 0=disable port-write message handling
- */
-static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
-{
- struct rio_priv *priv = mport->priv;
- u32 rval;
-
- rval = in_be32(&priv->msg_regs->pwmr);
-
- if (enable)
- rval |= RIO_IPWMR_PWE;
- else
- rval &= ~RIO_IPWMR_PWE;
-
- out_be32(&priv->msg_regs->pwmr, rval);
-
- return 0;
-}
-
-/**
- * fsl_rio_port_write_init - MPC85xx port write interface init
- * @mport: Master port implementing the port write unit
- *
- * Initializes port write unit hardware and DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_port_write_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Following configurations require a disabled port write controller */
- out_be32(&priv->msg_regs->pwmr,
- in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
-
- /* Initialize port write */
- priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
- RIO_PW_MSG_SIZE,
- &priv->port_write_msg.phys, GFP_KERNEL);
- if (!priv->port_write_msg.virt) {
- pr_err("RIO: unable allocate port write queue\n");
- return -ENOMEM;
- }
-
- priv->port_write_msg.err_count = 0;
- priv->port_write_msg.discard_count = 0;
-
- /* Point dequeue/enqueue pointers at first entry */
- out_be32(&priv->msg_regs->epwqbar, 0);
- out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
-
- pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
- in_be32(&priv->msg_regs->epwqbar),
- in_be32(&priv->msg_regs->pwqbar));
-
- /* Clear interrupt status IPWSR */
- out_be32(&priv->msg_regs->pwsr,
- (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
-
- /* Configure port write contoller for snooping enable all reporting,
- clear queue full */
- out_be32(&priv->msg_regs->pwmr,
- RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
-
-
- /* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
- IRQF_SHARED, "port-write", (void *)mport);
- if (rc < 0) {
- pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
- goto err_out;
- }
- /* Enable Error Interrupt */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
-
- INIT_WORK(&priv->pw_work, fsl_pw_dpc);
- spin_lock_init(&priv->pw_fifo_lock);
- if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
- pr_err("FIFO allocation failed\n");
- rc = -ENOMEM;
- goto err_out_irq;
- }
-
- pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
- in_be32(&priv->msg_regs->pwmr),
- in_be32(&priv->msg_regs->pwsr));
-
- return rc;
-
-err_out_irq:
- free_irq(IRQ_RIO_PW(mport), (void *)mport);
-err_out:
- dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
- priv->port_write_msg.virt,
- priv->port_write_msg.phys);
- return rc;
-}
-
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
const char *str;
@@ -1411,16 +335,21 @@ int fsl_rio_setup(struct platform_device *dev)
struct rio_mport *port;
struct rio_priv *priv;
int rc = 0;
- const u32 *dt_range, *cell;
- struct resource regs;
+ const u32 *dt_range, *cell, *port_index;
+ u32 active_ports = 0;
+ struct resource regs, rmu_regs;
+ struct device_node *np, *rmu_node;
int rlen;
u32 ccsr;
- u64 law_start, law_size;
+ u64 range_start, range_size;
int paw, aw, sw;
+ u32 i;
+ static int tmp;
+ struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
if (!dev->dev.of_node) {
dev_err(&dev->dev, "Device OF-Node is NULL");
- return -EFAULT;
+ return -ENODEV;
}
rc = of_address_to_resource(dev->dev.of_node, 0, &regs);
@@ -1429,37 +358,17 @@ int fsl_rio_setup(struct platform_device *dev)
dev->dev.of_node->full_name);
return -EFAULT;
}
- dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name);
+ dev_info(&dev->dev, "Of-device full name %s\n",
+ dev->dev.of_node->full_name);
dev_info(&dev->dev, "Regs: %pR\n", &regs);
- dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen);
- if (!dt_range) {
- dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
- dev->dev.of_node->full_name);
- return -EFAULT;
+ rio_regs_win = ioremap(regs.start, resource_size(&regs));
+ if (!rio_regs_win) {
+ dev_err(&dev->dev, "Unable to map rio register window\n");
+ rc = -ENOMEM;
+ goto err_rio_regs;
}
- /* Get node address wide */
- cell = of_get_property(dev->dev.of_node, "#address-cells", NULL);
- if (cell)
- aw = *cell;
- else
- aw = of_n_addr_cells(dev->dev.of_node);
- /* Get node size wide */
- cell = of_get_property(dev->dev.of_node, "#size-cells", NULL);
- if (cell)
- sw = *cell;
- else
- sw = of_n_size_cells(dev->dev.of_node);
- /* Get parent address wide wide */
- paw = of_n_addr_cells(dev->dev.of_node);
-
- law_start = of_read_number(dt_range + aw, paw);
- law_size = of_read_number(dt_range + aw + paw, sw);
-
- dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
- law_start, law_size);
-
ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
if (!ops) {
rc = -ENOMEM;
@@ -1479,143 +388,257 @@ int fsl_rio_setup(struct platform_device *dev)
ops->add_inb_buffer = fsl_add_inb_buffer;
ops->get_inb_message = fsl_get_inb_message;
- port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
- if (!port) {
+ rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
+ if (!rmu_node)
+ goto err_rmu;
+ rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
+ if (rc) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ rmu_node->full_name);
+ goto err_rmu;
+ }
+ rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
+ if (!rmu_regs_win) {
+ dev_err(&dev->dev, "Unable to map rmu register window\n");
rc = -ENOMEM;
- goto err_port;
+ goto err_rmu;
+ }
+ for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
+ rmu_np[tmp] = np;
+ tmp++;
}
- port->index = 0;
- priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
- if (!priv) {
- printk(KERN_ERR "Can't alloc memory for 'priv'\n");
+ /*set up doobell node*/
+ np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
+ if (!np) {
+ rc = -ENODEV;
+ goto err_dbell;
+ }
+ dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
+ if (!(dbell)) {
+ dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
rc = -ENOMEM;
- goto err_priv;
+ goto err_dbell;
}
+ dbell->dev = &dev->dev;
+ dbell->bellirq = irq_of_parse_and_map(np, 1);
+ dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
- INIT_LIST_HEAD(&port->dbells);
- port->iores.start = law_start;
- port->iores.end = law_start + law_size - 1;
- port->iores.flags = IORESOURCE_MEM;
- port->iores.name = "rio_io_win";
-
- if (request_resource(&iomem_resource, &port->iores) < 0) {
- dev_err(&dev->dev, "RIO: Error requesting master port region"
- " 0x%016llx-0x%016llx\n",
- (u64)port->iores.start, (u64)port->iores.end);
- rc = -ENOMEM;
- goto err_res;
+ aw = of_n_addr_cells(np);
+ dt_range = of_get_property(np, "reg", &rlen);
+ if (!dt_range) {
+ pr_err("%s: unable to find 'reg' property\n",
+ np->full_name);
+ rc = -ENOMEM;
+ goto err_pw;
}
+ range_start = of_read_number(dt_range, aw);
+ dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
+ (u32)range_start);
- priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
- priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
- priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
- priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
- dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
- priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
-
- rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
- rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
- rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
- strcpy(port->name, "RIO0 mport");
-
- priv->dev = &dev->dev;
-
- port->ops = ops;
- port->priv = priv;
- port->phys_efptr = 0x100;
-
- priv->regs_win = ioremap(regs.start, resource_size(&regs));
- rio_regs_win = priv->regs_win;
-
- /* Probe the master port phy type */
- ccsr = in_be32(priv->regs_win + RIO_CCSR);
- port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
- dev_info(&dev->dev, "RapidIO PHY type: %s\n",
- (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
- ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
- "unknown"));
- /* Checking the port training status */
- if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
- dev_err(&dev->dev, "Port is not ready. "
- "Try to restart connection...\n");
- switch (port->phy_type) {
- case RIO_PHY_SERIAL:
+ /*set up port write node*/
+ np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
+ if (!np) {
+ rc = -ENODEV;
+ goto err_pw;
+ }
+ pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
+ if (!(pw)) {
+ dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
+ rc = -ENOMEM;
+ goto err_pw;
+ }
+ pw->dev = &dev->dev;
+ pw->pwirq = irq_of_parse_and_map(np, 0);
+ dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
+ aw = of_n_addr_cells(np);
+ dt_range = of_get_property(np, "reg", &rlen);
+ if (!dt_range) {
+ pr_err("%s: unable to find 'reg' property\n",
+ np->full_name);
+ rc = -ENOMEM;
+ goto err;
+ }
+ range_start = of_read_number(dt_range, aw);
+ pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
+
+ /*set up ports node*/
+ for_each_child_of_node(dev->dev.of_node, np) {
+ port_index = of_get_property(np, "cell-index", NULL);
+ if (!port_index) {
+ dev_err(&dev->dev, "Can't get %s property 'cell-index'\n",
+ np->full_name);
+ continue;
+ }
+
+ dt_range = of_get_property(np, "ranges", &rlen);
+ if (!dt_range) {
+ dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
+ np->full_name);
+ continue;
+ }
+
+ /* Get node address wide */
+ cell = of_get_property(np, "#address-cells", NULL);
+ if (cell)
+ aw = *cell;
+ else
+ aw = of_n_addr_cells(np);
+ /* Get node size wide */
+ cell = of_get_property(np, "#size-cells", NULL);
+ if (cell)
+ sw = *cell;
+ else
+ sw = of_n_size_cells(np);
+ /* Get parent address wide wide */
+ paw = of_n_addr_cells(np);
+ range_start = of_read_number(dt_range + aw, paw);
+ range_size = of_read_number(dt_range + aw + paw, sw);
+
+ dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n",
+ np->full_name, range_start, range_size);
+
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port)
+ continue;
+
+ i = *port_index - 1;
+ port->index = (unsigned char)i;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
+ kfree(port);
+ continue;
+ }
+
+ INIT_LIST_HEAD(&port->dbells);
+ port->iores.start = range_start;
+ port->iores.end = port->iores.start + range_size - 1;
+ port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
+
+ if (request_resource(&iomem_resource, &port->iores) < 0) {
+ dev_err(&dev->dev, "RIO: Error requesting master port region"
+ " 0x%016llx-0x%016llx\n",
+ (u64)port->iores.start, (u64)port->iores.end);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ sprintf(port->name, "RIO mport %d", i);
+
+ priv->dev = &dev->dev;
+ port->ops = ops;
+ port->priv = priv;
+ port->phys_efptr = 0x100;
+ priv->regs_win = rio_regs_win;
+
+ /* Probe the master port phy type */
+ ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
+ port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+ if (port->phy_type == RIO_PHY_PARALLEL) {
+ dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n");
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ dev_info(&dev->dev, "RapidIO PHY type: Serial\n");
+ /* Checking the port training status */
+ if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev, "Port %d is not ready. "
+ "Try to restart connection...\n", i);
/* Disable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0);
+ out_be32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0);
/* Set 1x lane */
- setbits32(priv->regs_win + RIO_CCSR, 0x02000000);
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x02000000);
/* Enable ports */
- setbits32(priv->regs_win + RIO_CCSR, 0x00600000);
- break;
- case RIO_PHY_PARALLEL:
- /* Disable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0x22000000);
- /* Enable ports */
- out_be32(priv->regs_win + RIO_CCSR, 0x44000000);
- break;
- }
- msleep(100);
- if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
- dev_err(&dev->dev, "Port restart failed.\n");
- rc = -ENOLINK;
- goto err;
+ setbits32(priv->regs_win
+ + RIO_CCSR + i*0x20, 0x00600000);
+ msleep(100);
+ if (in_be32((priv->regs_win
+ + RIO_ESCSR + i*0x20)) & 1) {
+ dev_err(&dev->dev,
+ "Port %d restart failed.\n", i);
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ dev_info(&dev->dev, "Port %d restart success!\n", i);
}
- dev_info(&dev->dev, "Port restart success!\n");
- }
- fsl_rio_info(&dev->dev, ccsr);
+ fsl_rio_info(&dev->dev, ccsr);
- port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
+ port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
- dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
- port->sys_size ? 65536 : 256);
+ dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ if (rio_register_mport(port)) {
+ release_resource(&port->iores);
+ kfree(priv);
+ kfree(port);
+ continue;
+ }
+ if (port->host_deviceid >= 0)
+ out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
+ RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
+ else
+ out_be32(priv->regs_win + RIO_GCCSR,
+ RIO_PORT_GEN_MASTER);
+
+ priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
+ RIO_ATMU_REGS_PORT2_OFFSET));
- if (rio_register_mport(port))
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((priv->regs_win
+ + RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
+
+ /* Configure maintenance transaction window */
+ out_be32(&priv->maint_atmu_regs->rowbar,
+ port->iores.start >> 12);
+ out_be32(&priv->maint_atmu_regs->rowar,
+ 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
+
+ priv->maint_win = ioremap(port->iores.start,
+ RIO_MAINT_WIN_SIZE);
+
+ rio_law_start = range_start;
+
+ fsl_rio_setup_rmu(port, rmu_np[i]);
+
+ dbell->mport[i] = port;
+
+ active_ports++;
+ }
+
+ if (!active_ports) {
+ rc = -ENOLINK;
goto err;
+ }
- if (port->host_deviceid >= 0)
- out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
- RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
- else
- out_be32(priv->regs_win + RIO_GCCSR, 0x00000000);
-
- priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
- + RIO_ATMU_REGS_OFFSET);
- priv->maint_atmu_regs = priv->atmu_regs + 1;
- priv->dbell_atmu_regs = priv->atmu_regs + 2;
- priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
- ((port->phy_type == RIO_PHY_SERIAL) ?
- RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
-
- /* Set to receive any dist ID for serial RapidIO controller. */
- if (port->phy_type == RIO_PHY_SERIAL)
- out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
-
- /* Configure maintenance transaction window */
- out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12);
- out_be32(&priv->maint_atmu_regs->rowar,
- 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
-
- priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
-
- /* Configure outbound doorbell window */
- out_be32(&priv->dbell_atmu_regs->rowbar,
- (law_start + RIO_MAINT_WIN_SIZE) >> 12);
- out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */
- fsl_rio_doorbell_init(port);
- fsl_rio_port_write_init(port);
+ fsl_rio_doorbell_init(dbell);
+ fsl_rio_port_write_init(pw);
return 0;
err:
- iounmap(priv->regs_win);
- release_resource(&port->iores);
-err_res:
- kfree(priv);
-err_priv:
- kfree(port);
-err_port:
+ kfree(pw);
+err_pw:
+ kfree(dbell);
+err_dbell:
+ iounmap(rmu_regs_win);
+err_rmu:
kfree(ops);
err_ops:
+ iounmap(rio_regs_win);
+err_rio_regs:
return rc;
}
@@ -1631,7 +654,7 @@ static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev)
static const struct of_device_id fsl_of_rio_rpn_ids[] = {
{
- .compatible = "fsl,rapidio-delta",
+ .compatible = "fsl,srio",
},
{},
};
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
new file mode 100644
index 00000000000..ae8e27405a0
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -0,0 +1,135 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FSL_RIO_H
+#define __FSL_RIO_H
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/kfifo.h>
+
+#define RIO_REGS_WIN(mport) (((struct rio_priv *)(mport->priv))->regs_win)
+
+#define RIO_MAINT_WIN_SIZE 0x400000
+#define RIO_LTLEDCSR 0x0608
+
+#define DOORBELL_ROWAR_EN 0x80000000
+#define DOORBELL_ROWAR_TFLOWLV 0x08000000 /* highest priority level */
+#define DOORBELL_ROWAR_PCI 0x02000000 /* PCI window */
+#define DOORBELL_ROWAR_NREAD 0x00040000 /* NREAD */
+#define DOORBELL_ROWAR_MAINTRD 0x00070000 /* maintenance read */
+#define DOORBELL_ROWAR_RES 0x00002000 /* wrtpy: reserverd */
+#define DOORBELL_ROWAR_MAINTWD 0x00007000
+#define DOORBELL_ROWAR_SIZE 0x0000000b /* window size is 4k */
+
+#define RIO_ATMU_REGS_PORT1_OFFSET 0x10c00
+#define RIO_ATMU_REGS_PORT2_OFFSET 0x10e00
+#define RIO_S_DBELL_REGS_OFFSET 0x13400
+#define RIO_S_PW_REGS_OFFSET 0x134e0
+#define RIO_ATMU_REGS_DBELL_OFFSET 0x10C40
+
+#define MAX_MSG_UNIT_NUM 2
+#define MAX_PORT_NUM 4
+
+struct rio_atmu_regs {
+ u32 rowtar;
+ u32 rowtear;
+ u32 rowbar;
+ u32 pad1;
+ u32 rowar;
+ u32 pad2[3];
+};
+
+struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+};
+
+struct rio_port_write_msg {
+ void *virt;
+ dma_addr_t phys;
+ u32 msg_count;
+ u32 err_count;
+ u32 discard_count;
+};
+
+struct fsl_rio_dbell {
+ struct rio_mport *mport[MAX_PORT_NUM];
+ struct device *dev;
+ struct rio_dbell_regs __iomem *dbell_regs;
+ struct rio_dbell_ring dbell_ring;
+ int bellirq;
+};
+
+struct fsl_rio_pw {
+ struct device *dev;
+ struct rio_pw_regs __iomem *pw_regs;
+ struct rio_port_write_msg port_write_msg;
+ int pwirq;
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
+};
+
+struct rio_priv {
+ struct device *dev;
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ void __iomem *maint_win;
+ void *rmm_handle; /* RapidIO message manager(unit) Handle */
+};
+
+extern void __iomem *rio_regs_win;
+extern void __iomem *rmu_regs_win;
+
+extern resource_size_t rio_law_start;
+
+extern struct fsl_rio_dbell *dbell;
+extern struct fsl_rio_pw *pw;
+
+extern int fsl_rio_setup_rmu(struct rio_mport *mport,
+ struct device_node *node);
+extern int fsl_rio_port_write_init(struct fsl_rio_pw *pw);
+extern int fsl_rio_pw_enable(struct rio_mport *mport, int enable);
+extern void fsl_rio_port_error_handler(int offset);
+extern int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell);
+
+extern int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data);
+extern int fsl_add_outb_message(struct rio_mport *mport,
+ struct rio_dev *rdev,
+ int mbox, void *buffer, size_t len);
+extern int fsl_open_outb_mbox(struct rio_mport *mport,
+ void *dev_id, int mbox, int entries);
+extern void fsl_close_outb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_open_inb_mbox(struct rio_mport *mport,
+ void *dev_id, int mbox, int entries);
+extern void fsl_close_inb_mbox(struct rio_mport *mport, int mbox);
+extern int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf);
+extern void *fsl_get_inb_message(struct rio_mport *mport, int mbox);
+
+#endif
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
new file mode 100644
index 00000000000..15485789e9d
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -0,0 +1,1104 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO RMU support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@freescale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@freescale.com>
+ * Liu Gang <Gang.Liu@freescale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include "fsl_rio.h"
+
+#define GET_RMM_HANDLE(mport) \
+ (((struct rio_priv *)(mport->priv))->rmm_handle)
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_PW(m) (((struct fsl_rio_pw *)(m))->pwirq)
+#define IRQ_RIO_BELL(m) (((struct fsl_rio_dbell *)(m))->bellirq)
+#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq)
+#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq)
+
+#define RIO_MIN_TX_RING_SIZE 2
+#define RIO_MAX_TX_RING_SIZE 2048
+#define RIO_MIN_RX_RING_SIZE 2
+#define RIO_MAX_RX_RING_SIZE 2048
+
+#define RIO_IPWMR_SEN 0x00100000
+#define RIO_IPWMR_QFIE 0x00000100
+#define RIO_IPWMR_EIE 0x00000020
+#define RIO_IPWMR_CQ 0x00000002
+#define RIO_IPWMR_PWE 0x00000001
+
+#define RIO_IPWSR_QF 0x00100000
+#define RIO_IPWSR_TE 0x00000080
+#define RIO_IPWSR_QFI 0x00000010
+#define RIO_IPWSR_PWD 0x00000008
+#define RIO_IPWSR_PWB 0x00000004
+
+#define RIO_EPWISR 0x10010
+/* EPWISR Error match value */
+#define RIO_EPWISR_PINT1 0x80000000
+#define RIO_EPWISR_PINT2 0x40000000
+#define RIO_EPWISR_MU 0x00000002
+#define RIO_EPWISR_PW 0x00000001
+
+#define IPWSR_CLEAR 0x98
+#define OMSR_CLEAR 0x1cb3
+#define IMSR_CLEAR 0x491
+#define IDSR_CLEAR 0x91
+#define ODSR_CLEAR 0x1c00
+#define LTLEECSR_ENABLE_ALL 0xFFC000FC
+#define RIO_LTLEECSR 0x060c
+
+#define RIO_IM0SR 0x64
+#define RIO_IM1SR 0x164
+#define RIO_OM0SR 0x4
+#define RIO_OM1SR 0x104
+
+#define RIO_DBELL_WIN_SIZE 0x1000
+
+#define RIO_MSG_OMR_MUI 0x00000002
+#define RIO_MSG_OSR_TE 0x00000080
+#define RIO_MSG_OSR_QOI 0x00000020
+#define RIO_MSG_OSR_QFI 0x00000010
+#define RIO_MSG_OSR_MUB 0x00000004
+#define RIO_MSG_OSR_EOMI 0x00000002
+#define RIO_MSG_OSR_QEI 0x00000001
+
+#define RIO_MSG_IMR_MI 0x00000002
+#define RIO_MSG_ISR_TE 0x00000080
+#define RIO_MSG_ISR_QFI 0x00000010
+#define RIO_MSG_ISR_DIQI 0x00000001
+
+#define RIO_MSG_DESC_SIZE 32
+#define RIO_MSG_BUFFER_SIZE 4096
+
+#define DOORBELL_DMR_DI 0x00000002
+#define DOORBELL_DSR_TE 0x00000080
+#define DOORBELL_DSR_QFI 0x00000010
+#define DOORBELL_DSR_DIQI 0x00000001
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
+#define DOORBELL_INFO_OFFSET 0x06
+
+#define DOORBELL_MESSAGE_SIZE 0x08
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_msg_regs {
+ u32 omr;
+ u32 osr;
+ u32 pad1;
+ u32 odqdpar;
+ u32 pad2;
+ u32 osar;
+ u32 odpr;
+ u32 odatr;
+ u32 odcr;
+ u32 pad3;
+ u32 odqepar;
+ u32 pad4[13];
+ u32 imr;
+ u32 isr;
+ u32 pad5;
+ u32 ifqdpar;
+ u32 pad6;
+ u32 ifqepar;
+};
+
+struct rio_dbell_regs {
+ u32 odmr;
+ u32 odsr;
+ u32 pad1[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 pad2[3];
+ u32 odretcr;
+ u32 pad3[12];
+ u32 dmr;
+ u32 dsr;
+ u32 pad4;
+ u32 dqdpar;
+ u32 pad5;
+ u32 dqepar;
+};
+
+struct rio_pw_regs {
+ u32 pwmr;
+ u32 pwsr;
+ u32 epwqbar;
+ u32 pwqbar;
+};
+
+
+struct rio_tx_desc {
+ u32 pad1;
+ u32 saddr;
+ u32 dport;
+ u32 dattr;
+ u32 pad2;
+ u32 pad3;
+ u32 dwcnt;
+ u32 pad4;
+};
+
+struct rio_msg_tx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+ dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+ int tx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+ int rx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct fsl_rmu {
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int txirq;
+ int rxirq;
+};
+
+/**
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+ int osr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ osr = in_be32(&rmu->msg_regs->osr);
+
+ if (osr & RIO_MSG_OSR_TE) {
+ pr_info("RIO: outbound message transmission error\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_TE);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_QOI) {
+ pr_info("RIO: outbound message queue overflow\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_QOI);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_EOMI) {
+ u32 dqp = in_be32(&rmu->msg_regs->odqdpar);
+ int slot = (dqp - rmu->msg_tx_ring.phys) >> 5;
+ if (port->outb_msg[0].mcback != NULL) {
+ port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id,
+ -1,
+ slot);
+ }
+ /* Ack the end-of-message interrupt */
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+ int isr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ isr = in_be32(&rmu->msg_regs->isr);
+
+ if (isr & RIO_MSG_ISR_TE) {
+ pr_info("RIO: inbound message reception error\n");
+ out_be32((void *)&rmu->msg_regs->isr, RIO_MSG_ISR_TE);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (isr & RIO_MSG_ISR_DIQI) {
+ /*
+ * Can receive messages for any mailbox/letter to that
+ * mailbox destination. So, make the callback with an
+ * unknown/invalid mailbox number argument.
+ */
+ if (port->inb_msg[0].mcback != NULL)
+ port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id,
+ -1,
+ -1);
+
+ /* Ack the queueing interrupt */
+ out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+ int dsr;
+ struct fsl_rio_dbell *fsl_dbell = (struct fsl_rio_dbell *)dev_instance;
+ int i;
+
+ dsr = in_be32(&fsl_dbell->dbell_regs->dsr);
+
+ if (dsr & DOORBELL_DSR_TE) {
+ pr_info("RIO: doorbell reception error\n");
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_TE);
+ goto out;
+ }
+
+ if (dsr & DOORBELL_DSR_QFI) {
+ pr_info("RIO: doorbell queue full\n");
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_QFI);
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (dsr & DOORBELL_DSR_DIQI) {
+ u32 dmsg =
+ (u32) fsl_dbell->dbell_ring.virt +
+ (in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff);
+ struct rio_dbell *dbell;
+ int found = 0;
+
+ pr_debug
+ ("RIO: processing doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+ for (i = 0; i < MAX_PORT_NUM; i++) {
+ if (fsl_dbell->mport[i]) {
+ list_for_each_entry(dbell,
+ &fsl_dbell->mport[i]->dbells, node) {
+ if ((dbell->res->start
+ <= DBELL_INF(dmsg))
+ && (dbell->res->end
+ >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found && dbell->dinb) {
+ dbell->dinb(fsl_dbell->mport[i],
+ dbell->dev_id, DBELL_SID(dmsg),
+ DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ pr_debug
+ ("RIO: spurious doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ }
+ setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+void msg_unit_error_handler(void)
+{
+
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ out_be32((u32 *)(rmu_regs_win + RIO_IM0SR), IMSR_CLEAR);
+ out_be32((u32 *)(rmu_regs_win + RIO_IM1SR), IMSR_CLEAR);
+ out_be32((u32 *)(rmu_regs_win + RIO_OM0SR), OMSR_CLEAR);
+ out_be32((u32 *)(rmu_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+ out_be32(&dbell->dbell_regs->odsr, ODSR_CLEAR);
+ out_be32(&dbell->dbell_regs->dsr, IDSR_CLEAR);
+
+ out_be32(&pw->pw_regs->pwsr, IPWSR_CLEAR);
+}
+
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+ u32 ipwmr, ipwsr;
+ struct fsl_rio_pw *pw = (struct fsl_rio_pw *)dev_instance;
+ u32 epwisr, tmp;
+
+ epwisr = in_be32(rio_regs_win + RIO_EPWISR);
+ if (!(epwisr & RIO_EPWISR_PW))
+ goto pw_done;
+
+ ipwmr = in_be32(&pw->pw_regs->pwmr);
+ ipwsr = in_be32(&pw->pw_regs->pwsr);
+
+#ifdef DEBUG_PW
+ pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+ if (ipwsr & RIO_IPWSR_QF)
+ pr_debug(" QF");
+ if (ipwsr & RIO_IPWSR_TE)
+ pr_debug(" TE");
+ if (ipwsr & RIO_IPWSR_QFI)
+ pr_debug(" QFI");
+ if (ipwsr & RIO_IPWSR_PWD)
+ pr_debug(" PWD");
+ if (ipwsr & RIO_IPWSR_PWB)
+ pr_debug(" PWB");
+ pr_debug(" )\n");
+#endif
+ /* Schedule deferred processing if PW was received */
+ if (ipwsr & RIO_IPWSR_QFI) {
+ /* Save PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ if (kfifo_avail(&pw->pw_fifo) >= RIO_PW_MSG_SIZE) {
+ pw->port_write_msg.msg_count++;
+ kfifo_in(&pw->pw_fifo, pw->port_write_msg.virt,
+ RIO_PW_MSG_SIZE);
+ } else {
+ pw->port_write_msg.discard_count++;
+ pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+ pw->port_write_msg.discard_count);
+ }
+ /* Clear interrupt and issue Clear Queue command. This allows
+ * another port-write to be received.
+ */
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_QFI);
+ out_be32(&pw->pw_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+ schedule_work(&pw->pw_work);
+ }
+
+ if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+ pw->port_write_msg.err_count++;
+ pr_debug("RIO: Port-Write Transaction Err (%d)\n",
+ pw->port_write_msg.err_count);
+ /* Clear Transaction Error: port-write controller should be
+ * disabled when clearing this error
+ */
+ out_be32(&pw->pw_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_TE);
+ out_be32(&pw->pw_regs->pwmr, ipwmr);
+ }
+
+ if (ipwsr & RIO_IPWSR_PWD) {
+ pw->port_write_msg.discard_count++;
+ pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+ pw->port_write_msg.discard_count);
+ out_be32(&pw->pw_regs->pwsr, RIO_IPWSR_PWD);
+ }
+
+pw_done:
+ if (epwisr & RIO_EPWISR_PINT1) {
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(0);
+ }
+
+ if (epwisr & RIO_EPWISR_PINT2) {
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(1);
+ }
+
+ if (epwisr & RIO_EPWISR_MU) {
+ tmp = in_be32(rio_regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ msg_unit_error_handler();
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+ struct fsl_rio_pw *pw = container_of(work, struct fsl_rio_pw, pw_work);
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+ /*
+ * Process port-write messages
+ */
+ while (kfifo_out_spinlocked(&pw->pw_fifo, (unsigned char *)msg_buffer,
+ RIO_PW_MSG_SIZE, &pw->pw_fifo_lock)) {
+ /* Process one message */
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+ if ((i%4) == 0)
+ pr_debug("\n0x%02x: 0x%08x", i*4,
+ msg_buffer[i]);
+ else
+ pr_debug(" 0x%08x", msg_buffer[i]);
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ }
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+ u32 rval;
+
+ rval = in_be32(&pw->pw_regs->pwmr);
+
+ if (enable)
+ rval |= RIO_IPWMR_PWE;
+ else
+ rval &= ~RIO_IPWMR_PWE;
+
+ out_be32(&pw->pw_regs->pwmr, rval);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+
+int fsl_rio_port_write_init(struct fsl_rio_pw *pw)
+{
+ int rc = 0;
+
+ /* Following configurations require a disabled port write controller */
+ out_be32(&pw->pw_regs->pwmr,
+ in_be32(&pw->pw_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+ /* Initialize port write */
+ pw->port_write_msg.virt = dma_alloc_coherent(pw->dev,
+ RIO_PW_MSG_SIZE,
+ &pw->port_write_msg.phys, GFP_KERNEL);
+ if (!pw->port_write_msg.virt) {
+ pr_err("RIO: unable allocate port write queue\n");
+ return -ENOMEM;
+ }
+
+ pw->port_write_msg.err_count = 0;
+ pw->port_write_msg.discard_count = 0;
+
+ /* Point dequeue/enqueue pointers at first entry */
+ out_be32(&pw->pw_regs->epwqbar, 0);
+ out_be32(&pw->pw_regs->pwqbar, (u32) pw->port_write_msg.phys);
+
+ pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+ in_be32(&pw->pw_regs->epwqbar),
+ in_be32(&pw->pw_regs->pwqbar));
+
+ /* Clear interrupt status IPWSR */
+ out_be32(&pw->pw_regs->pwsr,
+ (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+ /* Configure port write contoller for snooping enable all reporting,
+ clear queue full */
+ out_be32(&pw->pw_regs->pwmr,
+ RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+ /* Hook up port-write handler */
+ rc = request_irq(IRQ_RIO_PW(pw), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)pw);
+ if (rc < 0) {
+ pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+ goto err_out;
+ }
+ /* Enable Error Interrupt */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
+
+ INIT_WORK(&pw->pw_work, fsl_pw_dpc);
+ spin_lock_init(&pw->pw_fifo_lock);
+ if (kfifo_alloc(&pw->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ pr_err("FIFO allocation failed\n");
+ rc = -ENOMEM;
+ goto err_out_irq;
+ }
+
+ pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+ in_be32(&pw->pw_regs->pwmr),
+ in_be32(&pw->pw_regs->pwsr));
+
+ return rc;
+
+err_out_irq:
+ free_irq(IRQ_RIO_PW(pw), (void *)pw);
+err_out:
+ dma_free_coherent(pw->dev, RIO_PW_MSG_SIZE,
+ pw->port_write_msg.virt,
+ pw->port_write_msg.phys);
+ return rc;
+}
+
+/**
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data)
+{
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ index, destid, data);
+
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&dbell->dbell_regs->odmr, 0x00000000);
+ out_be32(&dbell->dbell_regs->odretcr, 0x00000004);
+ out_be32(&dbell->dbell_regs->oddpr, destid << 16);
+ out_be32(&dbell->dbell_regs->oddatr, (index << 20) | data);
+ out_be32(&dbell->dbell_regs->odmr, 0x00000001);
+
+ return 0;
+}
+
+/**
+ * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 omr;
+ struct rio_tx_desc *desc = (struct rio_tx_desc *)rmu->msg_tx_ring.virt
+ + rmu->msg_tx_ring.tx_slot;
+ int ret = 0;
+
+ pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
+ "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
+ if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Copy and clear rest of buffer */
+ memcpy(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot], buffer,
+ len);
+ if (len < (RIO_MAX_MSG_SIZE - 4))
+ memset(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
+
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | (mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000 | ((mport->index) << 20);
+
+ /* Set transfer size aligned to next power of 2 (in double words) */
+ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+ /* Set snooping and source buffer address */
+ desc->saddr = 0x00000004
+ | rmu->msg_tx_ring.phys_buffer[rmu->msg_tx_ring.tx_slot];
+
+ /* Increment enqueue pointer */
+ omr = in_be32(&rmu->msg_regs->omr);
+ out_be32(&rmu->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+ /* Go to next descriptor */
+ if (++rmu->msg_tx_ring.tx_slot == rmu->msg_tx_ring.size)
+ rmu->msg_tx_ring.tx_slot = 0;
+
+out:
+ return ret;
+}
+
+/**
+ * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int
+fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_TX_RING_SIZE) ||
+ (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize shadow copy ring */
+ rmu->msg_tx_ring.dev_id = dev_id;
+ rmu->msg_tx_ring.size = entries;
+
+ for (i = 0; i < rmu->msg_tx_ring.size; i++) {
+ rmu->msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ &rmu->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt_buffer[i]) {
+ rc = -ENOMEM;
+ for (j = 0; j < rmu->msg_tx_ring.size; j++)
+ if (rmu->msg_tx_ring.virt_buffer[j])
+ dma_free_coherent(priv->dev,
+ RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.
+ virt_buffer[j],
+ rmu->msg_tx_ring.
+ phys_buffer[j]);
+ goto out;
+ }
+ }
+
+ /* Initialize outbound message descriptor ring */
+ rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ &rmu->msg_tx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt) {
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+ memset(rmu->msg_tx_ring.virt, 0,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ rmu->msg_tx_ring.tx_slot = 0;
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->odqdpar, rmu->msg_tx_ring.phys);
+ out_be32(&rmu->msg_regs->odqepar, rmu->msg_tx_ring.phys);
+
+ /* Configure for snooping */
+ out_be32(&rmu->msg_regs->osar, 0x00000004);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->osr, 0x000000b3);
+
+ /* Hook up outbound message handler */
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
+ "msg_tx", (void *)mport);
+ if (rc < 0)
+ goto out_irq;
+
+ /*
+ * Configure outbound message unit
+ * Snooping
+ * Interrupts (all enabled, except QEIE)
+ * Chaining mode
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->omr, 0x00100220);
+
+ /* Set number of entries */
+ out_be32(&rmu->msg_regs->omr,
+ in_be32(&rmu->msg_regs->omr) |
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ out_be32(&rmu->msg_regs->omr, in_be32(&rmu->msg_regs->omr) | 0x1);
+
+out:
+ return rc;
+
+out_irq:
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+out_dma:
+ for (i = 0; i < rmu->msg_tx_ring.size; i++)
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+
+ return rc;
+}
+
+/**
+ * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->omr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_TX(mport), (void *)mport);
+}
+
+/**
+ * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int
+fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_RX_RING_SIZE) ||
+ (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize client buffer ring */
+ rmu->msg_rx_ring.dev_id = dev_id;
+ rmu->msg_rx_ring.size = entries;
+ rmu->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < rmu->msg_rx_ring.size; i++)
+ rmu->msg_rx_ring.virt_buffer[i] = NULL;
+
+ /* Initialize inbound message ring */
+ rmu->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ &rmu->msg_rx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_rx_ring.virt) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->ifqdpar, (u32) rmu->msg_rx_ring.phys);
+ out_be32(&rmu->msg_regs->ifqepar, (u32) rmu->msg_rx_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->isr, 0x00000091);
+
+ /* Hook up inbound message handler */
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", (void *)mport);
+ if (rc < 0) {
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+ goto out;
+ }
+
+ /*
+ * Configure inbound message unit:
+ * Snooping
+ * 4KB max message size
+ * Unmask all interrupt sources
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->imr, 0x001b0060);
+
+ /* Set number of queue entries */
+ setbits32(&rmu->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
+
+ /* Now enable the unit */
+ setbits32(&rmu->msg_regs->imr, 0x1);
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->imr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_RX(mport), (void *)mport);
+}
+
+/**
+ * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ int rc = 0;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+ rmu->msg_rx_ring.rx_slot);
+
+ if (rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot]) {
+ printk(KERN_ERR
+ "RIO: error adding inbound buffer %d, buffer exists\n",
+ rmu->msg_rx_ring.rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot] = buf;
+ if (++rmu->msg_rx_ring.rx_slot == rmu->msg_rx_ring.size)
+ rmu->msg_rx_ring.rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 phys_buf, virt_buf;
+ void *buf = NULL;
+ int buf_idx;
+
+ phys_buf = in_be32(&rmu->msg_regs->ifqdpar);
+
+ /* If no more messages, then bail out */
+ if (phys_buf == in_be32(&rmu->msg_regs->ifqepar))
+ goto out2;
+
+ virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf
+ - rmu->msg_rx_ring.phys);
+ buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = rmu->msg_rx_ring.virt_buffer[buf_idx];
+
+ if (!buf) {
+ printk(KERN_ERR
+ "RIO: inbound message copy failed, no buffers\n");
+ goto out1;
+ }
+
+ /* Copy max message size, caller is expected to allocate that big */
+ memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+ /* Clear the available buffer */
+ rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+out1:
+ setbits32(&rmu->msg_regs->imr, RIO_MSG_IMR_MI);
+
+out2:
+ return buf;
+}
+
+/**
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+int fsl_rio_doorbell_init(struct fsl_rio_dbell *dbell)
+{
+ int rc = 0;
+
+ /* Initialize inbound doorbells */
+ dbell->dbell_ring.virt = dma_alloc_coherent(dbell->dev, 512 *
+ DOORBELL_MESSAGE_SIZE, &dbell->dbell_ring.phys, GFP_KERNEL);
+ if (!dbell->dbell_ring.virt) {
+ printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&dbell->dbell_regs->dqdpar, (u32) dbell->dbell_ring.phys);
+ out_be32(&dbell->dbell_regs->dqepar, (u32) dbell->dbell_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&dbell->dbell_regs->dsr, 0x00000091);
+
+ /* Hook up doorbell handler */
+ rc = request_irq(IRQ_RIO_BELL(dbell), fsl_rio_dbell_handler, 0,
+ "dbell_rx", (void *)dbell);
+ if (rc < 0) {
+ dma_free_coherent(dbell->dev, 512 * DOORBELL_MESSAGE_SIZE,
+ dbell->dbell_ring.virt, dbell->dbell_ring.phys);
+ printk(KERN_ERR
+ "MPC85xx RIO: unable to request inbound doorbell irq");
+ goto out;
+ }
+
+ /* Configure doorbells for snooping, 512 entries, and enable */
+ out_be32(&dbell->dbell_regs->dmr, 0x00108161);
+
+out:
+ return rc;
+}
+
+int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node)
+{
+ struct rio_priv *priv;
+ struct fsl_rmu *rmu;
+ u64 msg_start;
+ const u32 *msg_addr;
+ int mlen;
+ int aw;
+
+ if (!mport || !mport->priv)
+ return -EINVAL;
+
+ priv = mport->priv;
+
+ if (!node) {
+ dev_warn(priv->dev, "Can't get %s property 'fsl,rmu'\n",
+ priv->dev->of_node->full_name);
+ return -EINVAL;
+ }
+
+ rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL);
+ if (!rmu)
+ return -ENOMEM;
+
+ aw = of_n_addr_cells(node);
+ msg_addr = of_get_property(node, "reg", &mlen);
+ if (!msg_addr) {
+ pr_err("%s: unable to find 'reg' property of message-unit\n",
+ node->full_name);
+ kfree(rmu);
+ return -ENOMEM;
+ }
+ msg_start = of_read_number(msg_addr, aw);
+
+ rmu->msg_regs = (struct rio_msg_regs *)
+ (rmu_regs_win + (u32)msg_start);
+
+ rmu->txirq = irq_of_parse_and_map(node, 0);
+ rmu->rxirq = irq_of_parse_and_map(node, 1);
+ printk(KERN_INFO "%s: txirq: %d, rxirq %d\n",
+ node->full_name, rmu->txirq, rmu->rxirq);
+
+ priv->rmm_handle = rmu;
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+ return 0;
+}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8c7e8528e7c..4e9ccb1015d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -154,7 +154,7 @@ static inline unsigned int mpic_processor_id(struct mpic *mpic)
{
unsigned int cpu = 0;
- if (mpic->flags & MPIC_PRIMARY)
+ if (!(mpic->flags & MPIC_SECONDARY))
cpu = hard_smp_processor_id();
return cpu;
@@ -315,29 +315,25 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
}
#ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
- struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
- const u32 *dbasep;
-
- dbasep = of_get_property(node, "dcr-reg", NULL);
-
- rb->dhost = dcr_map(node, *dbasep + offset, size);
+ phys_addr_t phys_addr = dcr_resource_start(mpic->node, 0);
+ rb->dhost = dcr_map(mpic->node, phys_addr + offset, size);
BUG_ON(!DCR_MAP_OK(rb->dhost));
}
-static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+static inline void mpic_map(struct mpic *mpic,
phys_addr_t phys_addr, struct mpic_reg_bank *rb,
unsigned int offset, unsigned int size)
{
if (mpic->flags & MPIC_USES_DCR)
- _mpic_map_dcr(mpic, node, rb, offset, size);
+ _mpic_map_dcr(mpic, rb, offset, size);
else
_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
}
#else /* CONFIG_PPC_DCR */
-#define mpic_map(m,n,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,p,b,o,s) _mpic_map_mmio(m,p,b,o,s)
#endif /* !CONFIG_PPC_DCR */
@@ -901,7 +897,7 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
if (vold != vnew)
mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew);
- return IRQ_SET_MASK_OK_NOCOPY;;
+ return IRQ_SET_MASK_OK_NOCOPY;
}
void mpic_set_vector(unsigned int virq, unsigned int vector)
@@ -990,7 +986,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
#ifdef CONFIG_SMP
else if (hw >= mpic->ipi_vecs[0]) {
- WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+ WARN_ON(mpic->flags & MPIC_SECONDARY);
DBG("mpic: mapping as IPI\n");
irq_set_chip_data(virq, mpic);
@@ -1001,7 +997,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
#endif /* CONFIG_SMP */
if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) {
- WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+ WARN_ON(mpic->flags & MPIC_SECONDARY);
DBG("mpic: mapping as timer\n");
irq_set_chip_data(virq, mpic);
@@ -1115,17 +1111,28 @@ static int mpic_host_xlate(struct irq_host *h, struct device_node *ct,
return 0;
}
+/* IRQ handler for a secondary MPIC cascaded from another IRQ controller */
+static void mpic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct mpic *mpic = irq_desc_get_handler_data(desc);
+ unsigned int virq;
+
+ BUG_ON(!(mpic->flags & MPIC_SECONDARY));
+
+ virq = mpic_get_one_irq(mpic);
+ if (virq != NO_IRQ)
+ generic_handle_irq(virq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
static struct irq_host_ops mpic_host_ops = {
.match = mpic_host_match,
.map = mpic_host_map,
.xlate = mpic_host_xlate,
};
-static int mpic_reset_prohibited(struct device_node *node)
-{
- return node && of_get_property(node, "pic-no-reset", NULL);
-}
-
/*
* Exported functions
*/
@@ -1137,27 +1144,60 @@ struct mpic * __init mpic_alloc(struct device_node *node,
unsigned int irq_count,
const char *name)
{
- struct mpic *mpic;
- u32 greg_feature;
- const char *vers;
- int i;
- int intvec_top;
- u64 paddr = phys_addr;
+ int i, psize, intvec_top;
+ struct mpic *mpic;
+ u32 greg_feature;
+ const char *vers;
+ const u32 *psrc;
+
+ /* Default MPIC search parameters */
+ static const struct of_device_id __initconst mpic_device_id[] = {
+ { .type = "open-pic", },
+ { .compatible = "open-pic", },
+ {},
+ };
+
+ /*
+ * If we were not passed a device-tree node, then perform the default
+ * search for standardized a standardized OpenPIC.
+ */
+ if (node) {
+ node = of_node_get(node);
+ } else {
+ node = of_find_matching_node(NULL, mpic_device_id);
+ if (!node)
+ return NULL;
+ }
+
+ /* Pick the physical address from the device tree if unspecified */
+ if (!phys_addr) {
+ /* Check if it is DCR-based */
+ if (of_get_property(node, "dcr-reg", NULL)) {
+ flags |= MPIC_USES_DCR;
+ } else {
+ struct resource r;
+ if (of_address_to_resource(node, 0, &r))
+ goto err_of_node_put;
+ phys_addr = r.start;
+ }
+ }
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
- return NULL;
+ goto err_of_node_put;
mpic->name = name;
+ mpic->node = node;
+ mpic->paddr = phys_addr;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.name = name;
- if (flags & MPIC_PRIMARY)
+ if (!(flags & MPIC_SECONDARY))
mpic->hc_irq.irq_set_affinity = mpic_set_affinity;
#ifdef CONFIG_MPIC_U3_HT_IRQS
mpic->hc_ht_irq = mpic_irq_ht_chip;
mpic->hc_ht_irq.name = name;
- if (flags & MPIC_PRIMARY)
+ if (!(flags & MPIC_SECONDARY))
mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity;
#endif /* CONFIG_MPIC_U3_HT_IRQS */
@@ -1194,28 +1234,22 @@ struct mpic * __init mpic_alloc(struct device_node *node,
mpic->spurious_vec = intvec_top;
/* Check for "big-endian" in device-tree */
- if (node && of_get_property(node, "big-endian", NULL) != NULL)
+ if (of_get_property(mpic->node, "big-endian", NULL) != NULL)
mpic->flags |= MPIC_BIG_ENDIAN;
- if (node && of_device_is_compatible(node, "fsl,mpic"))
+ if (of_device_is_compatible(mpic->node, "fsl,mpic"))
mpic->flags |= MPIC_FSL;
/* Look for protected sources */
- if (node) {
- int psize;
- unsigned int bits, mapsize;
- const u32 *psrc =
- of_get_property(node, "protected-sources", &psize);
- if (psrc) {
- psize /= 4;
- bits = intvec_top + 1;
- mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
- mpic->protected = kzalloc(mapsize, GFP_KERNEL);
- BUG_ON(mpic->protected == NULL);
- for (i = 0; i < psize; i++) {
- if (psrc[i] > intvec_top)
- continue;
- __set_bit(psrc[i], mpic->protected);
- }
+ psrc = of_get_property(mpic->node, "protected-sources", &psize);
+ if (psrc) {
+ /* Allocate a bitmap with one bit per interrupt */
+ unsigned int mapsize = BITS_TO_LONGS(intvec_top + 1);
+ mpic->protected = kzalloc(mapsize*sizeof(long), GFP_KERNEL);
+ BUG_ON(mpic->protected == NULL);
+ for (i = 0; i < psize/sizeof(u32); i++) {
+ if (psrc[i] > intvec_top)
+ continue;
+ __set_bit(psrc[i], mpic->protected);
}
}
@@ -1224,42 +1258,32 @@ struct mpic * __init mpic_alloc(struct device_node *node,
#endif
/* default register type */
- mpic->reg_type = (flags & MPIC_BIG_ENDIAN) ?
- mpic_access_mmio_be : mpic_access_mmio_le;
-
- /* If no physical address is passed in, a device-node is mandatory */
- BUG_ON(paddr == 0 && node == NULL);
+ if (flags & MPIC_BIG_ENDIAN)
+ mpic->reg_type = mpic_access_mmio_be;
+ else
+ mpic->reg_type = mpic_access_mmio_le;
- /* If no physical address passed in, check if it's dcr based */
- if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) {
+ /*
+ * An MPIC with a "dcr-reg" property must be accessed that way, but
+ * only if the kernel includes DCR support.
+ */
#ifdef CONFIG_PPC_DCR
- mpic->flags |= MPIC_USES_DCR;
+ if (flags & MPIC_USES_DCR)
mpic->reg_type = mpic_access_dcr;
#else
- BUG();
-#endif /* CONFIG_PPC_DCR */
- }
-
- /* If the MPIC is not DCR based, and no physical address was passed
- * in, try to obtain one
- */
- if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
- const u32 *reg = of_get_property(node, "reg", NULL);
- BUG_ON(reg == NULL);
- paddr = of_translate_address(node, reg);
- BUG_ON(paddr == OF_BAD_ADDR);
- }
+ BUG_ON(flags & MPIC_USES_DCR);
+#endif
/* Map the global registers */
- mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
- mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+ mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
/* Reset */
/* When using a device-node, reset requests are only honored if the MPIC
* is allowed to reset.
*/
- if (mpic_reset_prohibited(node))
+ if (of_get_property(mpic->node, "pic-no-reset", NULL))
mpic->flags |= MPIC_NO_RESET;
if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) {
@@ -1307,7 +1331,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
for_each_possible_cpu(i) {
unsigned int cpu = get_hard_smp_processor_id(i);
- mpic_map(mpic, node, paddr, &mpic->cpuregs[cpu],
+ mpic_map(mpic, mpic->paddr, &mpic->cpuregs[cpu],
MPIC_INFO(CPU_BASE) + cpu * MPIC_INFO(CPU_STRIDE),
0x1000);
}
@@ -1315,16 +1339,21 @@ struct mpic * __init mpic_alloc(struct device_node *node,
/* Initialize main ISU if none provided */
if (mpic->isu_size == 0) {
mpic->isu_size = mpic->num_sources;
- mpic_map(mpic, node, paddr, &mpic->isus[0],
+ mpic_map(mpic, mpic->paddr, &mpic->isus[0],
MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
}
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
- mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+ mpic->irqhost = irq_alloc_host(mpic->node, IRQ_HOST_MAP_LINEAR,
isu_size ? isu_size : mpic->num_sources,
&mpic_host_ops,
flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+
+ /*
+ * FIXME: The code leaks the MPIC object and mappings here; this
+ * is very unlikely to fail but it ought to be fixed anyways.
+ */
if (mpic->irqhost == NULL)
return NULL;
@@ -1347,19 +1376,23 @@ struct mpic * __init mpic_alloc(struct device_node *node,
}
printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
" max %d CPUs\n",
- name, vers, (unsigned long long)paddr, num_possible_cpus());
+ name, vers, (unsigned long long)mpic->paddr, num_possible_cpus());
printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
mpic->isu_size, mpic->isu_shift, mpic->isu_mask);
mpic->next = mpics;
mpics = mpic;
- if (flags & MPIC_PRIMARY) {
+ if (!(flags & MPIC_SECONDARY)) {
mpic_primary = mpic;
irq_set_default_host(mpic->irqhost);
}
return mpic;
+
+err_of_node_put:
+ of_node_put(node);
+ return NULL;
}
void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
@@ -1369,7 +1402,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
BUG_ON(isu_num >= MPIC_MAX_ISU);
- mpic_map(mpic, mpic->irqhost->of_node,
+ mpic_map(mpic,
paddr, &mpic->isus[isu_num], 0,
MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
@@ -1385,8 +1418,7 @@ void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
void __init mpic_init(struct mpic *mpic)
{
- int i;
- int cpu;
+ int i, cpu;
BUG_ON(mpic->num_sources == 0);
@@ -1424,7 +1456,7 @@ void __init mpic_init(struct mpic *mpic)
/* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
- if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY)) {
+ if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) {
mpic_scan_ht_pics(mpic);
mpic_u3msi_init(mpic);
}
@@ -1471,6 +1503,17 @@ void __init mpic_init(struct mpic *mpic)
GFP_KERNEL);
BUG_ON(mpic->save_data == NULL);
#endif
+
+ /* Check if this MPIC is chained from a parent interrupt controller */
+ if (mpic->flags & MPIC_SECONDARY) {
+ int virq = irq_of_parse_and_map(mpic->node, 0);
+ if (virq != NO_IRQ) {
+ printk(KERN_INFO "%s: hooking up to IRQ %d\n",
+ mpic->node->full_name, virq);
+ irq_set_handler_data(virq, mpic);
+ irq_set_chained_handler(virq, &mpic_cascade);
+ }
+ }
}
void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio)
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 862f11b3821..4f05f754234 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -185,9 +185,15 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose,
out:
dma_offset_set = 1;
pci_dram_offset = res->start;
+ hose->dma_window_base_cur = res->start;
+ hose->dma_window_size = resource_size(res);
printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
pci_dram_offset);
+ printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
+ (unsigned long long)hose->dma_window_base_cur);
+ printk(KERN_INFO "DMA window size 0x%016llx\n",
+ (unsigned long long)hose->dma_window_size);
return 0;
}
@@ -647,6 +653,7 @@ static unsigned int ppc4xx_pciex_port_count;
struct ppc4xx_pciex_hwops
{
+ bool want_sdr;
int (*core_init)(struct device_node *np);
int (*port_init_hw)(struct ppc4xx_pciex_port *port);
int (*setup_utl)(struct ppc4xx_pciex_port *port);
@@ -916,6 +923,7 @@ static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port)
static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speA_pciex_init_port_hw,
.setup_utl = ppc440speA_pciex_init_utl,
@@ -924,6 +932,7 @@ static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata =
static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc440spe_pciex_core_init,
.port_init_hw = ppc440speB_pciex_init_port_hw,
.setup_utl = ppc440speB_pciex_init_utl,
@@ -1034,6 +1043,7 @@ static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc460ex_pciex_core_init,
.port_init_hw = ppc460ex_pciex_init_port_hw,
.setup_utl = ppc460ex_pciex_init_utl,
@@ -1181,6 +1191,7 @@ done:
}
static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
+ .want_sdr = true,
.core_init = ppc460sx_pciex_core_init,
.port_init_hw = ppc460sx_pciex_init_port_hw,
.setup_utl = ppc460sx_pciex_init_utl,
@@ -1276,6 +1287,7 @@ static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
{
+ .want_sdr = true,
.core_init = ppc405ex_pciex_core_init,
.port_init_hw = ppc405ex_pciex_init_port_hw,
.setup_utl = ppc405ex_pciex_init_utl,
@@ -1284,6 +1296,52 @@ static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata =
#endif /* CONFIG_40x */
+#ifdef CONFIG_476FPE
+static int __init ppc_476fpe_pciex_core_init(struct device_node *np)
+{
+ return 4;
+}
+
+static void __init ppc_476fpe_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+ u32 timeout_ms = 20;
+ u32 val = 0, mask = (PECFG_TLDLP_LNKUP|PECFG_TLDLP_PRESENT);
+ void __iomem *mbase = ioremap(port->cfg_space.start + 0x10000000,
+ 0x1000);
+
+ printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
+
+ if (mbase == NULL) {
+ printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
+ port->index);
+ return;
+ }
+
+ while (timeout_ms--) {
+ val = in_le32(mbase + PECFG_TLDLP);
+
+ if ((val & mask) == mask)
+ break;
+ msleep(10);
+ }
+
+ if (val & PECFG_TLDLP_PRESENT) {
+ printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
+ port->link = 1;
+ } else
+ printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
+
+ iounmap(mbase);
+ return;
+}
+
+static struct ppc4xx_pciex_hwops ppc_476fpe_pcie_hwops __initdata =
+{
+ .core_init = ppc_476fpe_pciex_core_init,
+ .check_link = ppc_476fpe_pciex_check_link,
+};
+#endif /* CONFIG_476FPE */
+
/* Check that the core has been initied and if not, do it */
static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
{
@@ -1309,6 +1367,10 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops;
#endif
+#ifdef CONFIG_476FPE
+ if (of_device_is_compatible(np, "ibm,plb-pciex-476fpe"))
+ ppc4xx_pciex_hwops = &ppc_476fpe_pcie_hwops;
+#endif
if (ppc4xx_pciex_hwops == NULL) {
printk(KERN_WARNING "PCIE: unknown host type %s\n",
np->full_name);
@@ -1617,6 +1679,10 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port *port,
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
| DCRO_PEGPL_OMRxMSKL_VAL);
+ else if (of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
+ dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+ sa | DCRO_PEGPL_476FPE_OMR1MSKL_UOT
+ | DCRO_PEGPL_OMRxMSKL_VAL);
else
dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
sa | DCRO_PEGPL_OMR1MSKL_UOT
@@ -1739,9 +1805,10 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
/* Calculate window size */
sa = (0xffffffffffffffffull << ilog2(size));
if (res->flags & IORESOURCE_PREFETCH)
- sa |= 0x8;
+ sa |= PCI_BASE_ADDRESS_MEM_PREFETCH;
- if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+ if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx") ||
+ of_device_is_compatible(port->node, "ibm,plb-pciex-476fpe"))
sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1972,13 +2039,15 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
}
port->node = of_node_get(np);
- pval = of_get_property(np, "sdr-base", NULL);
- if (pval == NULL) {
- printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
- np->full_name);
- return;
+ if (ppc4xx_pciex_hwops->want_sdr) {
+ pval = of_get_property(np, "sdr-base", NULL);
+ if (pval == NULL) {
+ printk(KERN_ERR "PCIE: missing sdr-base for %s\n",
+ np->full_name);
+ return;
+ }
+ port->sdr_base = *pval;
}
- port->sdr_base = *pval;
/* Check if device_type property is set to "pci" or "pci-endpoint".
* Resulting from this setup this PCIe port will be configured
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 32ce763a375..bb4821938ab 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -476,6 +476,13 @@
#define DCRO_PEGPL_OMR1MSKL_UOT 0x00000002
#define DCRO_PEGPL_OMR3MSKL_IO 0x00000002
+/* 476FPE */
+#define PCCFG_LCPA 0x270
+#define PECFG_TLDLP 0x3F8
+#define PECFG_TLDLP_LNKUP 0x00000008
+#define PECFG_TLDLP_PRESENT 0x00000010
+#define DCRO_PEGPL_476FPE_OMR1MSKL_UOT 0x00000004
+
/* SDR Bit Mappings */
#define PESDRx_RCSSET_HLDPLB 0x10000000
#define PESDRx_RCSSET_RSTGU 0x01000000
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 9518d367a64..253dce98c16 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -27,33 +27,50 @@ static inline unsigned int icp_hv_get_xirr(unsigned char cppr)
{
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
long rc;
+ unsigned int ret = XICS_IRQ_SPURIOUS;
rc = plpar_hcall(H_XIRR, retbuf, cppr);
- if (rc != H_SUCCESS)
- panic(" bad return code xirr - rc = %lx\n", rc);
- return (unsigned int)retbuf[0];
-}
+ if (rc == H_SUCCESS) {
+ ret = (unsigned int)retbuf[0];
+ } else {
+ pr_err("%s: bad return code xirr cppr=0x%x returned %ld\n",
+ __func__, cppr, rc);
+ WARN_ON_ONCE(1);
+ }
-static inline void icp_hv_set_xirr(unsigned int value)
-{
- long rc = plpar_hcall_norets(H_EOI, value);
- if (rc != H_SUCCESS)
- panic("bad return code EOI - rc = %ld, value=%x\n", rc, value);
+ return ret;
}
static inline void icp_hv_set_cppr(u8 value)
{
long rc = plpar_hcall_norets(H_CPPR, value);
- if (rc != H_SUCCESS)
- panic("bad return code cppr - rc = %lx\n", rc);
+ if (rc != H_SUCCESS) {
+ pr_err("%s: bad return code cppr cppr=0x%x returned %ld\n",
+ __func__, value, rc);
+ WARN_ON_ONCE(1);
+ }
+}
+
+static inline void icp_hv_set_xirr(unsigned int value)
+{
+ long rc = plpar_hcall_norets(H_EOI, value);
+ if (rc != H_SUCCESS) {
+ pr_err("%s: bad return code eoi xirr=0x%x returned %ld\n",
+ __func__, value, rc);
+ WARN_ON_ONCE(1);
+ icp_hv_set_cppr(value >> 24);
+ }
}
static inline void icp_hv_set_qirr(int n_cpu , u8 value)
{
- long rc = plpar_hcall_norets(H_IPI, get_hard_smp_processor_id(n_cpu),
- value);
- if (rc != H_SUCCESS)
- panic("bad return code qirr - rc = %lx\n", rc);
+ int hw_cpu = get_hard_smp_processor_id(n_cpu);
+ long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+ if (rc != H_SUCCESS) {
+ pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
+ "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
+ WARN_ON_ONCE(1);
+ }
}
static void icp_hv_eoi(struct irq_data *d)
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 63762c672a0..d72eda6a4c0 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -137,7 +137,7 @@ static void xics_request_ipi(void)
* IPIs are marked IRQF_PERCPU. The handler was set in map.
*/
BUG_ON(request_irq(ipi, icp_ops->ipi_action,
- IRQF_PERCPU, "IPI", NULL));
+ IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL));
}
int __init xics_smp_probe(void)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 03a217ae3be..cb95eea74d3 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -228,13 +228,11 @@ Commands:\n\
t print backtrace\n\
x exit monitor and recover\n\
X exit monitor and dont recover\n"
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
" u dump segment table or SLB\n"
-#endif
-#ifdef CONFIG_PPC_STD_MMU_32
+#elif defined(CONFIG_PPC_STD_MMU_32)
" u dump segment registers\n"
-#endif
-#ifdef CONFIG_44x
+#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E)
" u dump TLB\n"
#endif
" ? help\n"
@@ -340,7 +338,7 @@ int cpus_are_in_xmon(void)
static inline int unrecoverable_excp(struct pt_regs *regs)
{
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOK3E)
+#if defined(CONFIG_4xx) || defined(CONFIG_PPC_BOOK3E)
/* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
return 0;
#else
@@ -885,13 +883,11 @@ cmds(struct pt_regs *excp)
case 'u':
dump_segments();
break;
-#endif
-#ifdef CONFIG_4xx
+#elif defined(CONFIG_4xx)
case 'u':
dump_tlb_44x();
break;
-#endif
-#ifdef CONFIG_PPC_BOOK3E
+#elif defined(CONFIG_PPC_BOOK3E)
case 'u':
dump_tlb_book3e();
break;
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 441521ad8a3..232df994953 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -368,11 +368,11 @@ static unsigned long mmap_rnd(void)
if (current->flags & PF_RANDOMIZE) {
unsigned long val = get_random_int();
if (test_thread_flag(TIF_32BIT))
- rnd = (val % (1UL << (22UL-PAGE_SHIFT)));
+ rnd = (val % (1UL << (23UL-PAGE_SHIFT)));
else
- rnd = (val % (1UL << (29UL-PAGE_SHIFT)));
+ rnd = (val % (1UL << (30UL-PAGE_SHIFT)));
}
- return (rnd << PAGE_SHIFT) * 2;
+ return rnd << PAGE_SHIFT;
}
void arch_pick_mmap_layout(struct mm_struct *mm)
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 7bf1e201578..5ee82a77723 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -640,7 +640,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
int status;
/* this hvc blocks until the DMA in progress really stopped */
- status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0);
+ status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
if (status)
dev_err(ctodev(card),
"lv1_net_stop_rx_dma failed, %d\n", status);
@@ -658,7 +658,7 @@ static inline void gelic_card_disable_txdmac(struct gelic_card *card)
int status;
/* this hvc blocks until the DMA in progress really stopped */
- status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0);
+ status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
if (status)
dev_err(ctodev(card),
"lv1_net_stop_tx_dma failed, status=%d\n", status);
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 5acd24a27d0..e9c2dfe471a 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -99,6 +99,9 @@ MODULE_LICENSE("GPL");
#define PMACZILOG_NAME "ttyPZ"
#endif
+#define pmz_debug(fmt, arg...) pr_debug("ttyPZ%d: " fmt, uap->port.line, ## arg)
+#define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg)
+#define pmz_info(fmt, arg...) pr_info("ttyPZ%d: " fmt, uap->port.line, ## arg)
/*
* For the sake of early serial console, we can do a pre-probe
@@ -106,7 +109,6 @@ MODULE_LICENSE("GPL");
*/
static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
static int pmz_ports_count;
-static DEFINE_MUTEX(pmz_irq_mutex);
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
@@ -126,9 +128,6 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
{
int i;
- if (ZS_IS_ASLEEP(uap))
- return;
-
/* Let pending transmits finish. */
for (i = 0; i < 1000; i++) {
unsigned char stat = read_zsreg(uap, R1);
@@ -216,32 +215,24 @@ static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
}
}
+static void pmz_interrupt_control(struct uart_pmac_port *uap, int enable)
+{
+ if (enable) {
+ uap->curregs[1] |= INT_ALL_Rx | TxINT_ENAB;
+ if (!ZS_IS_EXTCLK(uap))
+ uap->curregs[1] |= EXT_INT_ENAB;
+ } else {
+ uap->curregs[1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ }
+ write_zsreg(uap, R1, uap->curregs[1]);
+}
+
static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
{
struct tty_struct *tty = NULL;
unsigned char ch, r1, drop, error, flag;
int loops = 0;
- /* The interrupt can be enabled when the port isn't open, typically
- * that happens when using one port is open and the other closed (stale
- * interrupt) or when one port is used as a console.
- */
- if (!ZS_IS_OPEN(uap)) {
- pmz_debug("pmz: draining input\n");
- /* Port is closed, drain input data */
- for (;;) {
- if ((++loops) > 1000)
- goto flood;
- (void)read_zsreg(uap, R1);
- write_zsreg(uap, R0, ERR_RES);
- (void)read_zsdata(uap);
- ch = read_zsreg(uap, R0);
- if (!(ch & Rx_CH_AV))
- break;
- }
- return NULL;
- }
-
/* Sanity check, make sure the old bug is no longer happening */
if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
WARN_ON(1);
@@ -339,9 +330,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
return tty;
flood:
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- write_zsreg(uap, R1, uap->curregs[R1]);
- zssync(uap);
+ pmz_interrupt_control(uap, 0);
pmz_error("pmz: rx irq flood !\n");
return tty;
}
@@ -383,8 +372,6 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
{
struct circ_buf *xmit;
- if (ZS_IS_ASLEEP(uap))
- return;
if (ZS_IS_CONS(uap)) {
unsigned char status = read_zsreg(uap, R0);
@@ -481,6 +468,10 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
/* Channel A */
tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ if (!ZS_IS_OPEN(uap_a)) {
+ pmz_debug("ChanA interrupt while open !\n");
+ goto skip_a;
+ }
write_zsreg(uap_a, R0, RES_H_IUS);
zssync(uap_a);
if (r3 & CHAEXT)
@@ -491,16 +482,21 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_transmit_chars(uap_a);
rc = IRQ_HANDLED;
}
+ skip_a:
spin_unlock(&uap_a->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
- if (uap_b->node == NULL)
+ if (!uap_b)
goto out;
spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ if (!ZS_IS_OPEN(uap_a)) {
+ pmz_debug("ChanB interrupt while open !\n");
+ goto skip_b;
+ }
write_zsreg(uap_b, R0, RES_H_IUS);
zssync(uap_b);
if (r3 & CHBEXT)
@@ -511,14 +507,12 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_transmit_chars(uap_b);
rc = IRQ_HANDLED;
}
+ skip_b:
spin_unlock(&uap_b->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
out:
-#ifdef DEBUG_HARD
- pmz_debug("irq done.\n");
-#endif
return rc;
}
@@ -543,12 +537,8 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
*/
static unsigned int pmz_tx_empty(struct uart_port *port)
{
- struct uart_pmac_port *uap = to_pmz(port);
unsigned char status;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return TIOCSER_TEMT;
-
status = pmz_peek_status(to_pmz(port));
if (status & Tx_BUF_EMP)
return TIOCSER_TEMT;
@@ -570,8 +560,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (ZS_IS_IRDA(uap))
return;
/* We get called during boot with a port not up yet */
- if (ZS_IS_ASLEEP(uap) ||
- !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
+ if (!(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
return;
set_bits = clear_bits = 0;
@@ -590,8 +579,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
/* NOTE: Not subject to 'transmitter active' rule. */
uap->curregs[R5] |= set_bits;
uap->curregs[R5] &= ~clear_bits;
- if (ZS_IS_ASLEEP(uap))
- return;
+
write_zsreg(uap, R5, uap->curregs[R5]);
pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
set_bits, clear_bits, uap->curregs[R5]);
@@ -609,9 +597,6 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
unsigned char status;
unsigned int ret;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return 0;
-
status = read_zsreg(uap, R0);
ret = 0;
@@ -649,9 +634,6 @@ static void pmz_start_tx(struct uart_port *port)
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return;
-
status = read_zsreg(uap, R0);
/* TX busy? Just wait for the TX done interrupt. */
@@ -690,9 +672,6 @@ static void pmz_stop_rx(struct uart_port *port)
{
struct uart_pmac_port *uap = to_pmz(port);
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return;
-
pmz_debug("pmz: stop_rx()()\n");
/* Disable all RX interrupts. */
@@ -711,14 +690,12 @@ static void pmz_enable_ms(struct uart_port *port)
struct uart_pmac_port *uap = to_pmz(port);
unsigned char new_reg;
- if (ZS_IS_IRDA(uap) || uap->node == NULL)
+ if (ZS_IS_IRDA(uap))
return;
new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
if (new_reg != uap->curregs[R15]) {
uap->curregs[R15] = new_reg;
- if (ZS_IS_ASLEEP(uap))
- return;
/* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(uap, R15, uap->curregs[R15]);
}
@@ -734,8 +711,6 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
unsigned char set_bits, clear_bits, new_reg;
unsigned long flags;
- if (uap->node == NULL)
- return;
set_bits = clear_bits = 0;
if (break_state)
@@ -748,12 +723,6 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
if (new_reg != uap->curregs[R5]) {
uap->curregs[R5] = new_reg;
-
- /* NOTE: Not subject to 'transmitter active' rule. */
- if (ZS_IS_ASLEEP(uap)) {
- spin_unlock_irqrestore(&port->lock, flags);
- return;
- }
write_zsreg(uap, R5, uap->curregs[R5]);
}
@@ -927,14 +896,21 @@ static int __pmz_startup(struct uart_pmac_port *uap)
static void pmz_irda_reset(struct uart_pmac_port *uap)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
uap->curregs[R5] |= DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(110);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ msleep(110);
+
+ spin_lock_irqsave(&uap->port.lock, flags);
uap->curregs[R5] &= ~DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(10);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ msleep(10);
}
/*
@@ -949,13 +925,6 @@ static int pmz_startup(struct uart_port *port)
pmz_debug("pmz: startup()\n");
- if (ZS_IS_ASLEEP(uap))
- return -EAGAIN;
- if (uap->node == NULL)
- return -ENODEV;
-
- mutex_lock(&pmz_irq_mutex);
-
uap->flags |= PMACZILOG_FLAG_IS_OPEN;
/* A console is never powered down. Else, power up and
@@ -966,18 +935,14 @@ static int pmz_startup(struct uart_port *port)
pwr_delay = __pmz_startup(uap);
spin_unlock_irqrestore(&port->lock, flags);
}
-
- pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
+ sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
- "SCC", uap)) {
+ uap->irq_name, uap)) {
pmz_error("Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
- mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
}
- mutex_unlock(&pmz_irq_mutex);
-
/* Right now, we deal with delay by blocking here, I'll be
* smarter later on
*/
@@ -990,12 +955,9 @@ static int pmz_startup(struct uart_port *port)
if (ZS_IS_IRDA(uap))
pmz_irda_reset(uap);
- /* Enable interrupts emission from the chip */
+ /* Enable interrupt requests for the channel */
spin_lock_irqsave(&port->lock, flags);
- uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
- if (!ZS_IS_EXTCLK(uap))
- uap->curregs[R1] |= EXT_INT_ENAB;
- write_zsreg(uap, R1, uap->curregs[R1]);
+ pmz_interrupt_control(uap, 1);
spin_unlock_irqrestore(&port->lock, flags);
pmz_debug("pmz: startup() done.\n");
@@ -1010,49 +972,35 @@ static void pmz_shutdown(struct uart_port *port)
pmz_debug("pmz: shutdown()\n");
- if (uap->node == NULL)
- return;
-
- mutex_lock(&pmz_irq_mutex);
-
- /* Release interrupt handler */
- free_irq(uap->port.irq, uap);
-
spin_lock_irqsave(&port->lock, flags);
- uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
+ /* Disable interrupt requests for the channel */
+ pmz_interrupt_control(uap, 0);
- if (!ZS_IS_OPEN(uap->mate))
- pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
+ if (!ZS_IS_CONS(uap)) {
+ /* Disable receiver and transmitter */
+ uap->curregs[R3] &= ~RxENABLE;
+ uap->curregs[R5] &= ~TxENABLE;
- /* Disable interrupts */
- if (!ZS_IS_ASLEEP(uap)) {
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- write_zsreg(uap, R1, uap->curregs[R1]);
- zssync(uap);
+ /* Disable break assertion */
+ uap->curregs[R5] &= ~SND_BRK;
+ pmz_maybe_update_regs(uap);
}
- if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
- spin_unlock_irqrestore(&port->lock, flags);
- mutex_unlock(&pmz_irq_mutex);
- return;
- }
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Release interrupt handler */
+ free_irq(uap->port.irq, uap);
- /* Disable receiver and transmitter. */
- uap->curregs[R3] &= ~RxENABLE;
- uap->curregs[R5] &= ~TxENABLE;
+ spin_lock_irqsave(&port->lock, flags);
- /* Disable all interrupts and BRK assertion. */
- uap->curregs[R5] &= ~SND_BRK;
- pmz_maybe_update_regs(uap);
+ uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
- /* Shut the chip down */
- pmz_set_scc_power(uap, 0);
+ if (!ZS_IS_CONS(uap))
+ pmz_set_scc_power(uap, 0); /* Shut the chip down */
spin_unlock_irqrestore(&port->lock, flags);
- mutex_unlock(&pmz_irq_mutex);
-
pmz_debug("pmz: shutdown() done.\n");
}
@@ -1300,9 +1248,6 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
pmz_debug("pmz: set_termios()\n");
- if (ZS_IS_ASLEEP(uap))
- return;
-
memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
@@ -1352,19 +1297,15 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
spin_lock_irqsave(&port->lock, flags);
/* Disable IRQs on the port */
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- write_zsreg(uap, R1, uap->curregs[R1]);
+ pmz_interrupt_control(uap, 0);
/* Setup new port configuration */
__pmz_set_termios(port, termios, old);
/* Re-enable IRQs on the port */
- if (ZS_IS_OPEN(uap)) {
- uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
- if (!ZS_IS_EXTCLK(uap))
- uap->curregs[R1] |= EXT_INT_ENAB;
- write_zsreg(uap, R1, uap->curregs[R1]);
- }
+ if (ZS_IS_OPEN(uap))
+ pmz_interrupt_control(uap, 1);
+
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -1604,25 +1545,34 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
*/
static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
+ struct uart_pmac_port *uap;
int i;
/* Iterate the pmz_ports array to find a matching entry
*/
for (i = 0; i < MAX_ZS_PORTS; i++)
- if (pmz_ports[i].node == mdev->ofdev.dev.of_node) {
- struct uart_pmac_port *uap = &pmz_ports[i];
-
- uap->dev = mdev;
- dev_set_drvdata(&mdev->ofdev.dev, uap);
- if (macio_request_resources(uap->dev, "pmac_zilog"))
- printk(KERN_WARNING "%s: Failed to request resource"
- ", port still active\n",
- uap->node->name);
- else
- uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
- return 0;
- }
- return -ENODEV;
+ if (pmz_ports[i].node == mdev->ofdev.dev.of_node)
+ break;
+ if (i >= MAX_ZS_PORTS)
+ return -ENODEV;
+
+
+ uap = &pmz_ports[i];
+ uap->dev = mdev;
+ uap->port.dev = &mdev->ofdev.dev;
+ dev_set_drvdata(&mdev->ofdev.dev, uap);
+
+ /* We still activate the port even when failing to request resources
+ * to work around bugs in ancient Apple device-trees
+ */
+ if (macio_request_resources(uap->dev, "pmac_zilog"))
+ printk(KERN_WARNING "%s: Failed to request resource"
+ ", port still active\n",
+ uap->node->name);
+ else
+ uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
+
+ return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
/*
@@ -1636,12 +1586,15 @@ static int pmz_detach(struct macio_dev *mdev)
if (!uap)
return -ENODEV;
+ uart_remove_one_port(&pmz_uart_reg, &uap->port);
+
if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
macio_release_resources(uap->dev);
uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
}
dev_set_drvdata(&mdev->ofdev.dev, NULL);
uap->dev = NULL;
+ uap->port.dev = NULL;
return 0;
}
@@ -1650,59 +1603,13 @@ static int pmz_detach(struct macio_dev *mdev)
static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
- struct uart_state *state;
- unsigned long flags;
if (uap == NULL) {
printk("HRM... pmz_suspend with NULL uap\n");
return 0;
}
- if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
- return 0;
-
- pmz_debug("suspend, switching to state %d\n", pm_state.event);
-
- state = pmz_uart_reg.state + uap->port.line;
-
- mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->port.mutex);
-
- spin_lock_irqsave(&uap->port.lock, flags);
-
- if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) {
- /* Disable receiver and transmitter. */
- uap->curregs[R3] &= ~RxENABLE;
- uap->curregs[R5] &= ~TxENABLE;
-
- /* Disable all interrupts and BRK assertion. */
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- uap->curregs[R5] &= ~SND_BRK;
- pmz_load_zsregs(uap, uap->curregs);
- uap->flags |= PMACZILOG_FLAG_IS_ASLEEP;
- mb();
- }
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
-
- if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate))
- if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
- pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
- disable_irq(uap->port.irq);
- }
-
- if (ZS_IS_CONS(uap))
- uap->port.cons->flags &= ~CON_ENABLED;
-
- /* Shut the chip down */
- pmz_set_scc_power(uap, 0);
-
- mutex_unlock(&state->port.mutex);
- mutex_unlock(&pmz_irq_mutex);
-
- pmz_debug("suspend, switching complete\n");
-
- mdev->ofdev.dev.power.power_state = pm_state;
+ uart_suspend_port(&pmz_uart_reg, &uap->port);
return 0;
}
@@ -1711,76 +1618,20 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
static int pmz_resume(struct macio_dev *mdev)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
- struct uart_state *state;
- unsigned long flags;
- int pwr_delay = 0;
if (uap == NULL)
return 0;
- if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
- pmz_debug("resume, switching to state 0\n");
-
- state = pmz_uart_reg.state + uap->port.line;
-
- mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->port.mutex);
-
- spin_lock_irqsave(&uap->port.lock, flags);
- if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
- spin_unlock_irqrestore(&uap->port.lock, flags);
- goto bail;
- }
- pwr_delay = __pmz_startup(uap);
-
- /* Take care of config that may have changed while asleep */
- __pmz_set_termios(&uap->port, &uap->termios_cache, NULL);
-
- if (ZS_IS_OPEN(uap)) {
- /* Enable interrupts */
- uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
- if (!ZS_IS_EXTCLK(uap))
- uap->curregs[R1] |= EXT_INT_ENAB;
- write_zsreg(uap, R1, uap->curregs[R1]);
- }
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
-
- if (ZS_IS_CONS(uap))
- uap->port.cons->flags |= CON_ENABLED;
-
- /* Re-enable IRQ on the controller */
- if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
- pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- enable_irq(uap->port.irq);
- }
-
- bail:
- mutex_unlock(&state->port.mutex);
- mutex_unlock(&pmz_irq_mutex);
-
- /* Right now, we deal with delay by blocking here, I'll be
- * smarter later on
- */
- if (pwr_delay != 0) {
- pmz_debug("pmz: delaying %d ms\n", pwr_delay);
- msleep(pwr_delay);
- }
-
- pmz_debug("resume, switching complete\n");
-
- mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
+ uart_resume_port(&pmz_uart_reg, &uap->port);
return 0;
}
/*
* Probe all ports in the system and build the ports array, we register
- * with the serial layer at this point, the macio-type probing is only
- * used later to "attach" to the sysfs tree so we get power management
- * events
+ * with the serial layer later, so we get a proper struct device which
+ * allows the tty to attach properly. This is later than it used to be
+ * but the tty layer really wants it that way.
*/
static int __init pmz_probe(void)
{
@@ -1816,8 +1667,10 @@ static int __init pmz_probe(void)
/*
* Fill basic fields in the port structures
*/
- pmz_ports[count].mate = &pmz_ports[count+1];
- pmz_ports[count+1].mate = &pmz_ports[count];
+ if (node_b != NULL) {
+ pmz_ports[count].mate = &pmz_ports[count+1];
+ pmz_ports[count+1].mate = &pmz_ports[count];
+ }
pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
pmz_ports[count].node = node_a;
pmz_ports[count+1].node = node_b;
@@ -1855,8 +1708,8 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
struct resource *r_ports;
int irq;
- r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
- irq = platform_get_irq(uap->node, 0);
+ r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(uap->pdev, 0);
if (!r_ports || !irq)
return -ENODEV;
@@ -1885,19 +1738,19 @@ static int __init pmz_probe(void)
pmz_ports_count = 0;
- pmz_ports[0].mate = &pmz_ports[1];
pmz_ports[0].port.line = 0;
pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
- pmz_ports[0].node = &scc_a_pdev;
+ pmz_ports[0].pdev = &scc_a_pdev;
err = pmz_init_port(&pmz_ports[0]);
if (err)
return err;
pmz_ports_count++;
+ pmz_ports[0].mate = &pmz_ports[1];
pmz_ports[1].mate = &pmz_ports[0];
pmz_ports[1].port.line = 1;
pmz_ports[1].flags = 0;
- pmz_ports[1].node = &scc_b_pdev;
+ pmz_ports[1].pdev = &scc_b_pdev;
err = pmz_init_port(&pmz_ports[1]);
if (err)
return err;
@@ -1913,16 +1766,35 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
static int __init pmz_attach(struct platform_device *pdev)
{
+ struct uart_pmac_port *uap;
int i;
+ /* Iterate the pmz_ports array to find a matching entry */
for (i = 0; i < pmz_ports_count; i++)
- if (pmz_ports[i].node == pdev)
- return 0;
- return -ENODEV;
+ if (pmz_ports[i].pdev == pdev)
+ break;
+ if (i >= pmz_ports_count)
+ return -ENODEV;
+
+ uap = &pmz_ports[i];
+ uap->port.dev = &pdev->dev;
+ platform_set_drvdata(pdev, uap);
+
+ return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
static int __exit pmz_detach(struct platform_device *pdev)
{
+ struct uart_pmac_port *uap = platform_get_drvdata(pdev);
+
+ if (!uap)
+ return -ENODEV;
+
+ uart_remove_one_port(&pmz_uart_reg, &uap->port);
+
+ platform_set_drvdata(pdev, NULL);
+ uap->port.dev = NULL;
+
return 0;
}
@@ -1954,38 +1826,13 @@ static struct console pmz_console = {
*/
static int __init pmz_register(void)
{
- int i, rc;
-
pmz_uart_reg.nr = pmz_ports_count;
pmz_uart_reg.cons = PMACZILOG_CONSOLE;
/*
* Register this driver with the serial core
*/
- rc = uart_register_driver(&pmz_uart_reg);
- if (rc)
- return rc;
-
- /*
- * Register each port with the serial core
- */
- for (i = 0; i < pmz_ports_count; i++) {
- struct uart_pmac_port *uport = &pmz_ports[i];
- /* NULL node may happen on wallstreet */
- if (uport->node != NULL)
- rc = uart_add_one_port(&pmz_uart_reg, &uport->port);
- if (rc)
- goto err_out;
- }
-
- return 0;
-err_out:
- while (i-- > 0) {
- struct uart_pmac_port *uport = &pmz_ports[i];
- uart_remove_one_port(&pmz_uart_reg, &uport->port);
- }
- uart_unregister_driver(&pmz_uart_reg);
- return rc;
+ return uart_register_driver(&pmz_uart_reg);
}
#ifdef CONFIG_PPC_PMAC
@@ -2084,10 +1931,13 @@ static void __exit exit_pmz(void)
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
- if (uport->node != NULL) {
- uart_remove_one_port(&pmz_uart_reg, &uport->port);
+#ifdef CONFIG_PPC_PMAC
+ if (uport->node != NULL)
pmz_dispose_port(uport);
- }
+#else
+ if (uport->pdev != NULL)
+ pmz_dispose_port(uport);
+#endif
}
/* Unregister UART driver */
uart_unregister_driver(&pmz_uart_reg);
@@ -2114,8 +1964,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
struct uart_pmac_port *uap = &pmz_ports[con->index];
unsigned long flags;
- if (ZS_IS_ASLEEP(uap))
- return;
spin_lock_irqsave(&uap->port.lock, flags);
/* Turn of interrupts and enable the transmitter. */
@@ -2160,8 +2008,13 @@ static int __init pmz_console_setup(struct console *co, char *options)
if (co->index >= pmz_ports_count)
co->index = 0;
uap = &pmz_ports[co->index];
+#ifdef CONFIG_PPC_PMAC
if (uap->node == NULL)
return -ENODEV;
+#else
+ if (uap->pdev == NULL)
+ return -ENODEV;
+#endif
port = &uap->port;
/*
diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h
index cbc34fbb1b2..3483242ee3e 100644
--- a/drivers/tty/serial/pmac_zilog.h
+++ b/drivers/tty/serial/pmac_zilog.h
@@ -1,16 +1,6 @@
#ifndef __PMAC_ZILOG_H__
#define __PMAC_ZILOG_H__
-#ifdef CONFIG_PPC_PMAC
-#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
-#else
-#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg)
-#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg)
-#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg)
-#endif
-
/*
* At most 2 ESCCs with 2 ports each
*/
@@ -35,7 +25,7 @@ struct uart_pmac_port {
*/
struct device_node *node;
#else
- struct platform_device *node;
+ struct platform_device *pdev;
#endif
/* Port type as obtained from device tree (IRDA, modem, ...) */
@@ -50,14 +40,11 @@ struct uart_pmac_port {
#define PMACZILOG_FLAG_REGS_HELD 0x00000010
#define PMACZILOG_FLAG_TX_STOPPED 0x00000020
#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040
-#define PMACZILOG_FLAG_ENABLED 0x00000080
#define PMACZILOG_FLAG_IS_IRDA 0x00000100
#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200
#define PMACZILOG_FLAG_HAS_DMA 0x00000400
#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800
-#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000
#define PMACZILOG_FLAG_IS_OPEN 0x00002000
-#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000
#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000
#define PMACZILOG_FLAG_BREAK 0x00010000
@@ -74,6 +61,8 @@ struct uart_pmac_port {
volatile struct dbdma_regs __iomem *rx_dma_regs;
#endif
+ unsigned char irq_name[8];
+
struct ktermios termios_cache;
};
@@ -388,9 +377,7 @@ static inline void zssync(struct uart_pmac_port *port)
#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
-#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
-#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
#endif /* __PMAC_ZILOG_H__ */
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index cea8918b823..2ebe606a2db 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -963,6 +963,9 @@ static void qe_uart_set_termios(struct uart_port *port,
/* Do we really need a spinlock here? */
spin_lock_irqsave(&port->lock, flags);
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
out_be16(&uccp->upsmr, upsmr);
if (soft_uart) {
out_be16(&uccup->supsmr, supsmr);
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index cb163a5397b..0c4f34311ed 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -41,13 +41,14 @@
/* Supported palette hacks */
enum {
cmap_unknown,
- cmap_m64, /* ATI Mach64 */
+ cmap_simple, /* ATI Mach64 */
cmap_r128, /* ATI Rage128 */
cmap_M3A, /* ATI Rage Mobility M3 Head A */
cmap_M3B, /* ATI Rage Mobility M3 Head B */
cmap_radeon, /* ATI Radeon */
cmap_gxt2000, /* IBM GXT2000 */
cmap_avivo, /* ATI R5xx */
+ cmap_qemu, /* qemu vga */
};
struct offb_par {
@@ -100,36 +101,32 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
struct offb_par *par = (struct offb_par *) info->par;
- int i, depth;
- u32 *pal = info->pseudo_palette;
-
- depth = info->var.bits_per_pixel;
- if (depth == 16)
- depth = (info->var.green.length == 5) ? 15 : 16;
-
- if (regno > 255 ||
- (depth == 16 && regno > 63) ||
- (depth == 15 && regno > 31))
- return 1;
-
- if (regno < 16) {
- switch (depth) {
- case 15:
- pal[regno] = (regno << 10) | (regno << 5) | regno;
- break;
- case 16:
- pal[regno] = (regno << 11) | (regno << 5) | regno;
- break;
- case 24:
- pal[regno] = (regno << 16) | (regno << 8) | regno;
- break;
- case 32:
- i = (regno << 8) | regno;
- pal[regno] = (i << 16) | i;
- break;
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 *pal = info->pseudo_palette;
+ u32 cr = red >> (16 - info->var.red.length);
+ u32 cg = green >> (16 - info->var.green.length);
+ u32 cb = blue >> (16 - info->var.blue.length);
+ u32 value;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ value = (cr << info->var.red.offset) |
+ (cg << info->var.green.offset) |
+ (cb << info->var.blue.offset);
+ if (info->var.transp.length > 0) {
+ u32 mask = (1 << info->var.transp.length) - 1;
+ mask <<= info->var.transp.offset;
+ value |= mask;
}
+ pal[regno] = value;
+ return 0;
}
+ if (regno > 255)
+ return -EINVAL;
+
red >>= 8;
green >>= 8;
blue >>= 8;
@@ -138,7 +135,7 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
return 0;
switch (par->cmap_type) {
- case cmap_m64:
+ case cmap_simple:
writeb(regno, par->cmap_adr);
writeb(red, par->cmap_data);
writeb(green, par->cmap_data);
@@ -208,7 +205,7 @@ static int offb_blank(int blank, struct fb_info *info)
if (blank)
for (i = 0; i < 256; i++) {
switch (par->cmap_type) {
- case cmap_m64:
+ case cmap_simple:
writeb(i, par->cmap_adr);
for (j = 0; j < 3; j++)
writeb(0, par->cmap_data);
@@ -350,7 +347,7 @@ static void offb_init_palette_hacks(struct fb_info *info, struct device_node *dp
par->cmap_adr =
ioremap(base + 0x7ff000, 0x1000) + 0xcc0;
par->cmap_data = par->cmap_adr + 1;
- par->cmap_type = cmap_m64;
+ par->cmap_type = cmap_simple;
} else if (dp && (of_device_is_compatible(dp, "pci1014,b7") ||
of_device_is_compatible(dp, "pci1014,21c"))) {
par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000);
@@ -371,6 +368,16 @@ static void offb_init_palette_hacks(struct fb_info *info, struct device_node *dp
par->cmap_type = cmap_avivo;
}
of_node_put(pciparent);
+ } else if (dp && of_device_is_compatible(dp, "qemu,std-vga")) {
+ const u32 io_of_addr[3] = { 0x01000000, 0x0, 0x0 };
+ u64 io_addr = of_translate_address(dp, io_of_addr);
+ if (io_addr != OF_BAD_ADDR) {
+ par->cmap_adr = ioremap(io_addr + 0x3c8, 2);
+ if (par->cmap_adr) {
+ par->cmap_type = cmap_simple;
+ par->cmap_data = par->cmap_adr + 1;
+ }
+ }
}
info->fix.visual = (par->cmap_type != cmap_unknown) ?
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_STATIC_PSEUDOCOLOR;
@@ -381,7 +388,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
int pitch, unsigned long address,
int foreign_endian, struct device_node *dp)
{
- unsigned long res_size = pitch * height * (depth + 7) / 8;
+ unsigned long res_size = pitch * height;
struct offb_par *par = &default_par;
unsigned long res_start = address;
struct fb_fix_screeninfo *fix;
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 7408af843b8..23f81de5182 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -130,7 +130,6 @@ struct cpuidle_driver {
#ifdef CONFIG_CPU_IDLE
extern void disable_cpuidle(void);
extern int cpuidle_idle_call(void);
-
extern int cpuidle_register_driver(struct cpuidle_driver *drv);
struct cpuidle_driver *cpuidle_get_driver(void);
extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
@@ -145,7 +144,6 @@ extern void cpuidle_disable_device(struct cpuidle_device *dev);
#else
static inline void disable_cpuidle(void) { }
static inline int cpuidle_idle_call(void) { return -ENODEV; }
-
static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
{return -ENODEV; }
static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }
diff --git a/tools/perf/arch/powerpc/util/dwarf-regs.c b/tools/perf/arch/powerpc/util/dwarf-regs.c
index 48ae0c5e3f7..7cdd61d0e27 100644
--- a/tools/perf/arch/powerpc/util/dwarf-regs.c
+++ b/tools/perf/arch/powerpc/util/dwarf-regs.c
@@ -9,7 +9,10 @@
* 2 of the License, or (at your option) any later version.
*/
+#include <stdlib.h>
+#ifndef __UCLIBC__
#include <libio.h>
+#endif
#include <dwarf-regs.h>