summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-22 15:53:59 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-22 15:53:59 -0700
commitfb2123fad3b499f0898835b19dbb93b18d27ee98 (patch)
tree7273754cded304f52dbbef86d23dda96e0a8452a
parenta481991467d38afb43c3921d5b5b59ccb61b04ba (diff)
parent991214386dee8a3cd9adc743778f472ac8a12bbc (diff)
downloadlinux-3.10-fb2123fad3b499f0898835b19dbb93b18d27ee98.tar.gz
linux-3.10-fb2123fad3b499f0898835b19dbb93b18d27ee98.tar.bz2
linux-3.10-fb2123fad3b499f0898835b19dbb93b18d27ee98.zip
Merge tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc patches from Greg Kroah-Hartman: "Here are a few various char/misc tree patches for the 3.5-rc1 merge window. Nothing major here at all, just different driver updates and some parport dead code removal. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: parport: remove unused dead code from lowlevel drivers xilinx_hwicap: reset XHI_MAX_RETRIES xilinx_hwicap: add support for virtex6 FPGAs Support M95040 SPI EEPROM misc: add support for bmp18x chips to the bmp085 driver misc: bmp085: add device tree properties misc: clean up bmp085 driver misc: do not mark exported functions __devexit misc: add missing __devexit_p() annotations pch_phub: delete duplicate definitions misc: Fix irq leak in max8997_muic_probe error path
-rw-r--r--Documentation/devicetree/bindings/misc/bmp085.txt20
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.c30
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.h2
-rw-r--r--drivers/misc/Kconfig26
-rw-r--r--drivers/misc/Makefile2
-rw-r--r--drivers/misc/ad525x_dpot.c2
-rw-r--r--drivers/misc/bh1780gli.c2
-rw-r--r--drivers/misc/bmp085-i2c.c91
-rw-r--r--drivers/misc/bmp085-spi.c91
-rw-r--r--drivers/misc/bmp085.c356
-rw-r--r--drivers/misc/bmp085.h33
-rw-r--r--drivers/misc/eeprom/at25.c19
-rw-r--r--drivers/misc/max8997-muic.c6
-rw-r--r--drivers/misc/pch_phub.c4
-rw-r--r--drivers/misc/pti.c2
-rw-r--r--drivers/parport/parport_amiga.c36
-rw-r--r--drivers/parport/parport_atari.c9
-rw-r--r--drivers/parport/parport_mfc3.c35
-rw-r--r--drivers/parport/parport_pc.c276
-rw-r--r--drivers/parport/parport_sunbpp.c21
-rw-r--r--include/linux/spi/eeprom.h10
22 files changed, 503 insertions, 571 deletions
diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt
new file mode 100644
index 00000000000..91dfda2e4e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/bmp085.txt
@@ -0,0 +1,20 @@
+BMP085/BMP18x digital pressure sensors
+
+Required properties:
+- compatible: bosch,bmp085
+
+Optional properties:
+- chip-id: configurable chip id for non-default chip revisions
+- temp-measurement-period: temperature measurement period (milliseconds)
+- default-oversampling: default oversampling value to be used at startup,
+ value range is 0-3 with rising sensitivity.
+
+Example:
+
+pressure@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ chip-id = <10>;
+ temp-measurement-period = <100>;
+ default-oversampling = <2>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 82ac057a24a..107d8addf0e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@ amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
atmel Atmel Corporation
+bosch Bosch Sensortec GmbH
cavium Cavium, Inc.
chrp Common Hardware Reference Platform
cortina Cortina Systems, Inc.
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 31ba11ca75e..2c5d15beea3 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -167,6 +167,7 @@ static const struct config_registers v4_config_registers = {
.BOOTSTS = UNIMPLEMENTED,
.CTL_1 = UNIMPLEMENTED,
};
+
static const struct config_registers v5_config_registers = {
.CRC = 0,
.FAR = 1,
@@ -192,6 +193,31 @@ static const struct config_registers v5_config_registers = {
.CTL_1 = 19,
};
+static const struct config_registers v6_config_registers = {
+ .CRC = 0,
+ .FAR = 1,
+ .FDRI = 2,
+ .FDRO = 3,
+ .CMD = 4,
+ .CTL = 5,
+ .MASK = 6,
+ .STAT = 7,
+ .LOUT = 8,
+ .COR = 9,
+ .MFWR = 10,
+ .FLR = UNIMPLEMENTED,
+ .KEY = UNIMPLEMENTED,
+ .CBC = 11,
+ .IDCODE = 12,
+ .AXSS = 13,
+ .C0R_1 = 14,
+ .CSOB = 15,
+ .WBSTAR = 16,
+ .TIMER = 17,
+ .BOOTSTS = 22,
+ .CTL_1 = 24,
+};
+
/**
* hwicap_command_desync - Send a DESYNC command to the ICAP port.
* @drvdata: a pointer to the drvdata.
@@ -744,6 +770,8 @@ static int __devinit hwicap_of_probe(struct platform_device *op,
regs = &v4_config_registers;
} else if (!strcmp(family, "virtex5")) {
regs = &v5_config_registers;
+ } else if (!strcmp(family, "virtex6")) {
+ regs = &v6_config_registers;
}
}
return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
@@ -785,6 +813,8 @@ static int __devinit hwicap_drv_probe(struct platform_device *pdev)
regs = &v4_config_registers;
} else if (!strcmp(family, "virtex5")) {
regs = &v5_config_registers;
+ } else if (!strcmp(family, "virtex6")) {
+ regs = &v6_config_registers;
}
}
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 8cca11981c5..d31ee23c9f1 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -86,7 +86,7 @@ struct hwicap_driver_config {
};
/* Number of times to poll the done regsiter */
-#define XHI_MAX_RETRIES 10
+#define XHI_MAX_RETRIES 5000
/************ Constant Definitions *************/
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index c7795096d43..96846955595 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -452,14 +452,32 @@ config ARM_CHARLCD
still useful.
config BMP085
- tristate "BMP085 digital pressure sensor"
+ bool
+ depends on SYSFS
+
+config BMP085_I2C
+ tristate "BMP085 digital pressure sensor on I2C"
+ select BMP085
+ select REGMAP_I2C
depends on I2C && SYSFS
help
- If you say yes here you get support for the Bosch Sensortec
- BMP085 digital pressure sensor.
+ Say Y here if you want to support Bosch Sensortec's digital pressure
+ sensor hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bmp085-i2c.
+
+config BMP085_SPI
+ tristate "BMP085 digital pressure sensor on SPI"
+ select BMP085
+ select REGMAP_SPI
+ depends on SPI_MASTER && SYSFS
+ help
+ Say Y here if you want to support Bosch Sensortec's digital pressure
+ sensor hooked to an SPI bus.
To compile this driver as a module, choose M here: the
- module will be called bmp085.
+ module will be called bmp085-spi.
config PCH_PHUB
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3e1d80106f0..509d0569dc0 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
obj-$(CONFIG_BMP085) += bmp085.o
+obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
+obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c
index 1d1d4261591..6938f1be664 100644
--- a/drivers/misc/ad525x_dpot.c
+++ b/drivers/misc/ad525x_dpot.c
@@ -749,7 +749,7 @@ exit:
}
EXPORT_SYMBOL(ad_dpot_probe);
-__devexit int ad_dpot_remove(struct device *dev)
+int ad_dpot_remove(struct device *dev)
{
struct dpot_data *data = dev_get_drvdata(dev);
int i;
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 54f6f39f990..f1f9877f3fd 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -248,7 +248,7 @@ static const struct i2c_device_id bh1780_id[] = {
static struct i2c_driver bh1780_driver = {
.probe = bh1780_probe,
- .remove = bh1780_remove,
+ .remove = __devexit_p(bh1780_remove),
.id_table = bh1780_id,
.driver = {
.name = "bh1780",
diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c
new file mode 100644
index 00000000000..9943971c13e
--- /dev/null
+++ b/drivers/misc/bmp085-i2c.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include "bmp085.h"
+
+#define BMP085_I2C_ADDRESS 0x77
+
+static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
+ I2C_CLIENT_END };
+
+static int bmp085_i2c_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ if (client->addr != BMP085_I2C_ADDRESS)
+ return -ENODEV;
+
+ return bmp085_detect(&client->dev);
+}
+
+static int __devinit bmp085_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err;
+ struct regmap *regmap = devm_regmap_init_i2c(client,
+ &bmp085_regmap_config);
+
+ if (IS_ERR(regmap)) {
+ err = PTR_ERR(regmap);
+ dev_err(&client->dev, "Failed to init regmap: %d\n", err);
+ return err;
+ }
+
+ return bmp085_probe(&client->dev, regmap);
+}
+
+static int bmp085_i2c_remove(struct i2c_client *client)
+{
+ return bmp085_remove(&client->dev);
+}
+
+static const struct of_device_id bmp085_of_match[] = {
+ { .compatible = "bosch,bmp085", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp085_of_match);
+
+static const struct i2c_device_id bmp085_id[] = {
+ { BMP085_NAME, 0 },
+ { "bmp180", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bmp085_id);
+
+static struct i2c_driver bmp085_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMP085_NAME,
+ .of_match_table = bmp085_of_match
+ },
+ .id_table = bmp085_id,
+ .probe = bmp085_i2c_probe,
+ .remove = __devexit_p(bmp085_i2c_remove),
+
+ .detect = bmp085_i2c_detect,
+ .address_list = normal_i2c
+};
+
+module_i2c_driver(bmp085_i2c_driver);
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP085 I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/bmp085-spi.c b/drivers/misc/bmp085-spi.c
new file mode 100644
index 00000000000..78aaff9b523
--- /dev/null
+++ b/drivers/misc/bmp085-spi.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include "bmp085.h"
+
+static int __devinit bmp085_spi_probe(struct spi_device *client)
+{
+ int err;
+ struct regmap *regmap;
+
+ client->bits_per_word = 8;
+ err = spi_setup(client);
+ if (err < 0) {
+ dev_err(&client->dev, "spi_setup failed!\n");
+ return err;
+ }
+
+ regmap = devm_regmap_init_spi(client, &bmp085_regmap_config);
+ if (IS_ERR(regmap)) {
+ err = PTR_ERR(regmap);
+ dev_err(&client->dev, "Failed to init regmap: %d\n", err);
+ return err;
+ }
+
+ return bmp085_probe(&client->dev, regmap);
+}
+
+static int bmp085_spi_remove(struct spi_device *client)
+{
+ return bmp085_remove(&client->dev);
+}
+
+static const struct of_device_id bmp085_of_match[] = {
+ { .compatible = "bosch,bmp085", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp085_of_match);
+
+static const struct spi_device_id bmp085_id[] = {
+ { "bmp180", 0 },
+ { "bmp181", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, bmp085_id);
+
+static struct spi_driver bmp085_spi_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMP085_NAME,
+ .of_match_table = bmp085_of_match
+ },
+ .id_table = bmp085_id,
+ .probe = bmp085_spi_probe,
+ .remove = __devexit_p(bmp085_spi_remove)
+};
+
+static int __init bmp085_spi_init(void)
+{
+ return spi_register_driver(&bmp085_spi_driver);
+}
+
+static void __exit bmp085_spi_exit(void)
+{
+ spi_unregister_driver(&bmp085_spi_driver);
+}
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP085 SPI bus driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp085_spi_init);
+module_exit(bmp085_spi_exit);
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 76c3064629f..62e418293b7 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -1,62 +1,62 @@
/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
-
- This driver supports the bmp085 digital barometric pressure
- and temperature sensor from Bosch Sensortec. The datasheet
- is available from their website:
- http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
-
- A pressure measurement is issued by reading from pressure0_input.
- The return value ranges from 30000 to 110000 pascal with a resulution
- of 1 pascal (0.01 millibar) which enables measurements from 9000m above
- to 500m below sea level.
-
- The temperature can be read from temp0_input. Values range from
- -400 to 850 representing the ambient temperature in degree celsius
- multiplied by 10.The resolution is 0.1 celsius.
-
- Because ambient pressure is temperature dependent, a temperature
- measurement will be executed automatically even if the user is reading
- from pressure0_input. This happens if the last temperature measurement
- has been executed more then one second ago.
-
- To decrease RMS noise from pressure measurements, the bmp085 can
- autonomously calculate the average of up to eight samples. This is
- set up by writing to the oversampling sysfs file. Accepted values
- are 0, 1, 2 and 3. 2^x when x is the value written to this file
- specifies the number of samples used to calculate the ambient pressure.
- RMS noise is specified with six pascal (without averaging) and decreases
- down to 3 pascal when using an oversampling setting of 3.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This driver supports the bmp085 and bmp18x digital barometric pressure
+ * and temperature sensors from Bosch Sensortec. The datasheets
+ * are available from their website:
+ * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+ * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
+ *
+ * A pressure measurement is issued by reading from pressure0_input.
+ * The return value ranges from 30000 to 110000 pascal with a resulution
+ * of 1 pascal (0.01 millibar) which enables measurements from 9000m above
+ * to 500m below sea level.
+ *
+ * The temperature can be read from temp0_input. Values range from
+ * -400 to 850 representing the ambient temperature in degree celsius
+ * multiplied by 10.The resolution is 0.1 celsius.
+ *
+ * Because ambient pressure is temperature dependent, a temperature
+ * measurement will be executed automatically even if the user is reading
+ * from pressure0_input. This happens if the last temperature measurement
+ * has been executed more then one second ago.
+ *
+ * To decrease RMS noise from pressure measurements, the bmp085 can
+ * autonomously calculate the average of up to eight samples. This is
+ * set up by writing to the oversampling sysfs file. Accepted values
+ * are 0, 1, 2 and 3. 2^x when x is the value written to this file
+ * specifies the number of samples used to calculate the ambient pressure.
+ * RMS noise is specified with six pascal (without averaging) and decreases
+ * down to 3 pascal when using an oversampling setting of 3.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
#include <linux/module.h>
+#include <linux/device.h>
#include <linux/init.h>
-#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include "bmp085.h"
-
-#define BMP085_I2C_ADDRESS 0x77
#define BMP085_CHIP_ID 0x55
-
#define BMP085_CALIBRATION_DATA_START 0xAA
#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
#define BMP085_CHIP_ID_REG 0xD0
-#define BMP085_VERSION_REG 0xD1
#define BMP085_CTRL_REG 0xF4
#define BMP085_TEMP_MEASUREMENT 0x2E
#define BMP085_PRESSURE_MEASUREMENT 0x34
@@ -65,12 +65,6 @@
#define BMP085_CONVERSION_REGISTER_XLSB 0xF8
#define BMP085_TEMP_CONVERSION_TIME 5
-#define BMP085_CLIENT_NAME "bmp085"
-
-
-static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
- I2C_CLIENT_END };
-
struct bmp085_calibration_data {
s16 AC1, AC2, AC3;
u16 AC4, AC5, AC6;
@@ -78,35 +72,30 @@ struct bmp085_calibration_data {
s16 MB, MC, MD;
};
-
-/* Each client has this additional data */
struct bmp085_data {
- struct i2c_client *client;
- struct mutex lock;
- struct bmp085_calibration_data calibration;
- u32 raw_temperature;
- u32 raw_pressure;
- unsigned char oversampling_setting;
+ struct device *dev;
+ struct regmap *regmap;
+ struct mutex lock;
+ struct bmp085_calibration_data calibration;
+ u8 oversampling_setting;
+ u32 raw_temperature;
+ u32 raw_pressure;
+ u32 temp_measurement_period;
unsigned long last_temp_measurement;
- s32 b6; /* calculated temperature correction coefficient */
+ u8 chip_id;
+ s32 b6; /* calculated temperature correction coefficient */
};
-
-static s32 bmp085_read_calibration_data(struct i2c_client *client)
+static s32 bmp085_read_calibration_data(struct bmp085_data *data)
{
u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
- struct bmp085_data *data = i2c_get_clientdata(client);
struct bmp085_calibration_data *cali = &(data->calibration);
- s32 status = i2c_smbus_read_i2c_block_data(client,
- BMP085_CALIBRATION_DATA_START,
- BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16),
- (u8 *)tmp);
+ s32 status = regmap_bulk_read(data->regmap,
+ BMP085_CALIBRATION_DATA_START, (u8 *)tmp,
+ (BMP085_CALIBRATION_DATA_LENGTH << 1));
if (status < 0)
return status;
- if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16))
- return -EIO;
-
cali->AC1 = be16_to_cpu(tmp[0]);
cali->AC2 = be16_to_cpu(tmp[1]);
cali->AC3 = be16_to_cpu(tmp[2]);
@@ -121,30 +110,26 @@ static s32 bmp085_read_calibration_data(struct i2c_client *client)
return 0;
}
-
static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
{
u16 tmp;
s32 status;
mutex_lock(&data->lock);
- status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
- BMP085_TEMP_MEASUREMENT);
- if (status != 0) {
- dev_err(&data->client->dev,
+ status = regmap_write(data->regmap, BMP085_CTRL_REG,
+ BMP085_TEMP_MEASUREMENT);
+ if (status < 0) {
+ dev_err(data->dev,
"Error while requesting temperature measurement.\n");
goto exit;
}
msleep(BMP085_TEMP_CONVERSION_TIME);
- status = i2c_smbus_read_i2c_block_data(data->client,
- BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
- if (status < 0)
- goto exit;
- if (status != sizeof(tmp)) {
- dev_err(&data->client->dev,
+ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+ &tmp, sizeof(tmp));
+ if (status < 0) {
+ dev_err(data->dev,
"Error while reading temperature measurement result\n");
- status = -EIO;
goto exit;
}
data->raw_temperature = be16_to_cpu(tmp);
@@ -162,10 +147,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
s32 status;
mutex_lock(&data->lock);
- status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
- BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6));
- if (status != 0) {
- dev_err(&data->client->dev,
+ status = regmap_write(data->regmap, BMP085_CTRL_REG,
+ BMP085_PRESSURE_MEASUREMENT +
+ (data->oversampling_setting << 6));
+ if (status < 0) {
+ dev_err(data->dev,
"Error while requesting pressure measurement.\n");
goto exit;
}
@@ -174,14 +160,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
msleep(2+(3 << data->oversampling_setting));
/* copy data into a u32 (4 bytes), but skip the first byte. */
- status = i2c_smbus_read_i2c_block_data(data->client,
- BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
- if (status < 0)
- goto exit;
- if (status != 3) {
- dev_err(&data->client->dev,
+ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+ ((u8 *)&tmp)+1, 3);
+ if (status < 0) {
+ dev_err(data->dev,
"Error while reading pressure measurement results\n");
- status = -EIO;
goto exit;
}
data->raw_pressure = be32_to_cpu((tmp));
@@ -193,7 +176,6 @@ exit:
return status;
}
-
/*
* This function starts the temperature measurement and returns the value
* in tenth of a degree celsius.
@@ -205,7 +187,7 @@ static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
int status;
status = bmp085_update_raw_temperature(data);
- if (status != 0)
+ if (status < 0)
goto exit;
x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
@@ -222,8 +204,10 @@ exit:
/*
* This function starts the pressure measurement and returns the value
* in millibar. Since the pressure depends on the ambient temperature,
- * a temperature measurement is executed if the last known value is older
- * than one second.
+ * a temperature measurement is executed according to the given temperature
+ * measurement period (default is 1 sec boundary). This period could vary
+ * and needs to be adjusted according to the sensor environment, i.e. if big
+ * temperature variations then the temperature needs to be read out often.
*/
static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
{
@@ -234,16 +218,16 @@ static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
int status;
/* alt least every second force an update of the ambient temperature */
- if (data->last_temp_measurement == 0 ||
- time_is_before_jiffies(data->last_temp_measurement + 1*HZ)) {
+ if ((data->last_temp_measurement == 0) ||
+ time_is_before_jiffies(data->last_temp_measurement + 1*HZ)) {
status = bmp085_get_temperature(data, NULL);
- if (status != 0)
- goto exit;
+ if (status < 0)
+ return status;
}
status = bmp085_update_raw_pressure(data);
- if (status != 0)
- goto exit;
+ if (status < 0)
+ return status;
x1 = (data->b6 * data->b6) >> 12;
x1 *= cali->B2;
@@ -274,15 +258,14 @@ static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
*pressure = p;
-exit:
- return status;
+ return 0;
}
/*
* This function sets the chip-internal oversampling. Valid values are 0..3.
* The chip will use 2^oversampling samples for internal averaging.
* This influences the measurement time and the accuracy; larger values
- * increase both. The datasheet gives on overview on how measurement time,
+ * increase both. The datasheet gives an overview on how measurement time,
* accuracy and noise correlate.
*/
static void bmp085_set_oversampling(struct bmp085_data *data,
@@ -306,22 +289,25 @@ static ssize_t set_oversampling(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
unsigned long oversampling;
- int success = strict_strtoul(buf, 10, &oversampling);
- if (success == 0) {
+ int err = kstrtoul(buf, 10, &oversampling);
+
+ if (err == 0) {
+ mutex_lock(&data->lock);
bmp085_set_oversampling(data, oversampling);
+ mutex_unlock(&data->lock);
return count;
}
- return success;
+
+ return err;
}
static ssize_t show_oversampling(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
+
return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
}
static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
@@ -333,11 +319,10 @@ static ssize_t show_temperature(struct device *dev,
{
int temperature;
int status;
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
status = bmp085_get_temperature(data, &temperature);
- if (status != 0)
+ if (status < 0)
return status;
else
return sprintf(buf, "%d\n", temperature);
@@ -350,11 +335,10 @@ static ssize_t show_pressure(struct device *dev,
{
int pressure;
int status;
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
status = bmp085_get_pressure(data, &pressure);
- if (status != 0)
+ if (status < 0)
return status;
else
return sprintf(buf, "%d\n", pressure);
@@ -373,38 +357,70 @@ static const struct attribute_group bmp085_attr_group = {
.attrs = bmp085_attributes,
};
-static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
+int bmp085_detect(struct device *dev)
{
- if (client->addr != BMP085_I2C_ADDRESS)
- return -ENODEV;
+ struct bmp085_data *data = dev_get_drvdata(dev);
+ unsigned int id;
+ int ret;
- if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
+ ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id);
+ if (ret < 0)
+ return ret;
+
+ if (id != data->chip_id)
return -ENODEV;
return 0;
}
+EXPORT_SYMBOL_GPL(bmp085_detect);
-static int bmp085_init_client(struct i2c_client *client)
+static void __init bmp085_get_of_properties(struct bmp085_data *data)
{
- unsigned char version;
- int status;
- struct bmp085_data *data = i2c_get_clientdata(client);
- data->client = client;
- status = bmp085_read_calibration_data(client);
- if (status != 0)
- goto exit;
- version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG);
+#ifdef CONFIG_OF
+ struct device_node *np = data->dev->of_node;
+ u32 prop;
+
+ if (!np)
+ return;
+
+ if (!of_property_read_u32(np, "chip-id", &prop))
+ data->chip_id = prop & 0xff;
+
+ if (!of_property_read_u32(np, "temp-measurement-period", &prop))
+ data->temp_measurement_period = (prop/100)*HZ;
+
+ if (!of_property_read_u32(np, "default-oversampling", &prop))
+ data->oversampling_setting = prop & 0xff;
+#endif
+}
+
+static int bmp085_init_client(struct bmp085_data *data)
+{
+ int status = bmp085_read_calibration_data(data);
+
+ if (status < 0)
+ return status;
+
+ /* default settings */
+ data->chip_id = BMP085_CHIP_ID;
data->last_temp_measurement = 0;
+ data->temp_measurement_period = 1*HZ;
data->oversampling_setting = 3;
+
+ bmp085_get_of_properties(data);
+
mutex_init(&data->lock);
- dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n",
- (version & 0x0F), (version & 0xF0) >> 4);
-exit:
- return status;
+
+ return 0;
}
-static int __devinit bmp085_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+struct regmap_config bmp085_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8
+};
+EXPORT_SYMBOL_GPL(bmp085_regmap_config);
+
+__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
{
struct bmp085_data *data;
int err = 0;
@@ -415,58 +431,48 @@ static int __devinit bmp085_probe(struct i2c_client *client,
goto exit;
}
- /* default settings after POR */
- data->oversampling_setting = 0x00;
-
- i2c_set_clientdata(client, data);
+ dev_set_drvdata(dev, data);
+ data->dev = dev;
+ data->regmap = regmap;
/* Initialize the BMP085 chip */
- err = bmp085_init_client(client);
- if (err != 0)
+ err = bmp085_init_client(data);
+ if (err < 0)
goto exit_free;
+ err = bmp085_detect(dev);
+ if (err < 0) {
+ dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
+ goto exit_free;
+ }
+
/* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
+ err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
if (err)
goto exit_free;
- dev_info(&data->client->dev, "Successfully initialized bmp085!\n");
- goto exit;
+ dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME);
+
+ return 0;
exit_free:
kfree(data);
exit:
return err;
}
+EXPORT_SYMBOL_GPL(bmp085_probe);
-static int __devexit bmp085_remove(struct i2c_client *client)
+int bmp085_remove(struct device *dev)
{
- sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
- kfree(i2c_get_clientdata(client));
- return 0;
-}
+ struct bmp085_data *data = dev_get_drvdata(dev);
-static const struct i2c_device_id bmp085_id[] = {
- { "bmp085", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, bmp085_id);
-
-static struct i2c_driver bmp085_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "bmp085"
- },
- .id_table = bmp085_id,
- .probe = bmp085_probe,
- .remove = __devexit_p(bmp085_remove),
-
- .detect = bmp085_detect,
- .address_list = normal_i2c
-};
+ sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group);
+ kfree(data);
-module_i2c_driver(bmp085_driver);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bmp085_remove);
-MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com");
+MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>");
MODULE_DESCRIPTION("BMP085 driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/misc/bmp085.h b/drivers/misc/bmp085.h
new file mode 100644
index 00000000000..2b8f615bca9
--- /dev/null
+++ b/drivers/misc/bmp085.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BMP085_H
+#define _BMP085_H
+
+#include <linux/regmap.h>
+
+#define BMP085_NAME "bmp085"
+
+extern struct regmap_config bmp085_regmap_config;
+
+int bmp085_probe(struct device *dev, struct regmap *regmap);
+int bmp085_remove(struct device *dev);
+int bmp085_detect(struct device *dev);
+
+#endif
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 01ab3c9b4cf..0842c2994ee 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -50,6 +50,7 @@ struct at25_data {
#define AT25_SR_BP1 0x08
#define AT25_SR_WPEN 0x80 /* writeprotect enable */
+#define AT25_INSTR_BIT3 0x08 /* Additional address bit in instr */
#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */
@@ -75,6 +76,7 @@ at25_ee_read(
ssize_t status;
struct spi_transfer t[2];
struct spi_message m;
+ u8 instr;
if (unlikely(offset >= at25->bin.size))
return 0;
@@ -84,7 +86,12 @@ at25_ee_read(
return count;
cp = command;
- *cp++ = AT25_READ;
+
+ instr = AT25_READ;
+ if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
+ if (offset >= (1U << (at25->addrlen * 8)))
+ instr |= AT25_INSTR_BIT3;
+ *cp++ = instr;
/* 8/16/24-bit address is written MSB first */
switch (at25->addrlen) {
@@ -167,14 +174,14 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
/* For write, rollover is within the page ... so we write at
* most one page, then manually roll over to the next page.
*/
- bounce[0] = AT25_WRITE;
mutex_lock(&at25->lock);
do {
unsigned long timeout, retries;
unsigned segment;
unsigned offset = (unsigned) off;
- u8 *cp = bounce + 1;
+ u8 *cp = bounce;
int sr;
+ u8 instr;
*cp = AT25_WREN;
status = spi_write(at25->spi, cp, 1);
@@ -184,6 +191,12 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
break;
}
+ instr = AT25_WRITE;
+ if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
+ if (offset >= (1U << (at25->addrlen * 8)))
+ instr |= AT25_INSTR_BIT3;
+ *cp++ = instr;
+
/* 8/16/24-bit address is written MSB first */
switch (at25->addrlen) {
default: /* case 3 */
diff --git a/drivers/misc/max8997-muic.c b/drivers/misc/max8997-muic.c
index 19591eaa492..2e7df9c5649 100644
--- a/drivers/misc/max8997-muic.c
+++ b/drivers/misc/max8997-muic.c
@@ -440,10 +440,6 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev)
"failed: irq request (IRQ: %d,"
" error :%d)\n",
muic_irq->irq, ret);
-
- for (i = i - 1; i >= 0; i--)
- free_irq(muic_irq->irq, info);
-
goto err_irq;
}
}
@@ -457,6 +453,8 @@ static int __devinit max8997_muic_probe(struct platform_device *pdev)
return ret;
err_irq:
+ while (--i >= 0)
+ free_irq(pdata->irq_base + muic_irqs[i].irq, info);
err_pdata:
kfree(info);
err_kfree:
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 10fc4785dba..9fbcacd703d 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -65,10 +65,6 @@
#define PCI_VENDOR_ID_ROHM 0x10db
#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
-/* Macros for ML7213 */
-#define PCI_VENDOR_ID_ROHM 0x10db
-#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
-
/* Macros for ML7223 */
#define PCI_DEVICE_ID_ROHM_ML7223_mPHUB 0x8012 /* for Bus-m */
#define PCI_DEVICE_ID_ROHM_ML7223_nPHUB 0x8002 /* for Bus-n */
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 383133b201a..b7eb545394b 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -888,7 +888,7 @@ static struct pci_driver pti_pci_driver = {
.name = PCINAME,
.id_table = pci_ids,
.probe = pti_pci_probe,
- .remove = pti_pci_remove,
+ .remove = __devexit_p(pti_pci_remove),
};
/**
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
index 8bef6d60f88..ee78e0ee6e0 100644
--- a/drivers/parport/parport_amiga.c
+++ b/drivers/parport/parport_amiga.c
@@ -48,23 +48,6 @@ static unsigned char amiga_read_data(struct parport *p)
return ciaa.prb;
}
-#if 0
-static unsigned char control_pc_to_amiga(unsigned char control)
-{
- unsigned char ret = 0;
-
- if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
- ;
- if (control & PARPORT_CONTROL_INIT) /* INITP */
- /* reset connected to cpu reset pin */;
- if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
- /* Not connected */;
- if (control & PARPORT_CONTROL_STROBE) /* Strobe */
- /* Handled only directly by hardware */;
- return ret;
-}
-#endif
-
static unsigned char control_amiga_to_pc(unsigned char control)
{
return PARPORT_CONTROL_SELECT |
@@ -95,25 +78,6 @@ static unsigned char amiga_frob_control( struct parport *p, unsigned char mask,
return old;
}
-#if 0 /* currently unused */
-static unsigned char status_pc_to_amiga(unsigned char status)
-{
- unsigned char ret = 1;
-
- if (status & PARPORT_STATUS_BUSY) /* Busy */
- ret &= ~1;
- if (status & PARPORT_STATUS_ACK) /* Ack */
- /* handled in hardware */;
- if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
- ret |= 2;
- if (status & PARPORT_STATUS_SELECT) /* select */
- ret |= 4;
- if (status & PARPORT_STATUS_ERROR) /* error */
- /* not connected */;
- return ret;
-}
-#endif
-
static unsigned char status_amiga_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index 0b28fccec03..7ad59ac68cf 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -130,15 +130,6 @@ parport_atari_data_forward(struct parport *p)
static void
parport_atari_data_reverse(struct parport *p)
{
-#if 0 /* too dangerous, can kill sound chip */
- unsigned long flags;
-
- local_irq_save(flags);
- /* Soundchip port B as input. */
- sound_ym.rd_data_reg_sel = 7;
- sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40;
- local_irq_restore(flags);
-#endif
}
static struct parport_operations parport_atari_ops = {
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 1c0c642b3e2..7578d79b368 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -147,25 +147,6 @@ DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
return old;
}
-#if 0 /* currently unused */
-static unsigned char status_pc_to_mfc3(unsigned char status)
-{
- unsigned char ret = 1;
-
- if (status & PARPORT_STATUS_BUSY) /* Busy */
- ret &= ~1;
- if (status & PARPORT_STATUS_ACK) /* Ack */
- ret |= 8;
- if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
- ret |= 2;
- if (status & PARPORT_STATUS_SELECT) /* select */
- ret |= 4;
- if (status & PARPORT_STATUS_ERROR) /* error */
- ret |= 16;
- return ret;
-}
-#endif
-
static unsigned char status_mfc3_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY;
@@ -184,14 +165,6 @@ static unsigned char status_mfc3_to_pc(unsigned char status)
return ret;
}
-#if 0 /* currently unused */
-static void mfc3_write_status( struct parport *p, unsigned char status)
-{
-DPRINTK(KERN_DEBUG "write_status %02x\n",status);
- pia(p)->ppra = (pia(p)->ppra & 0xe0) | status_pc_to_mfc3(status);
-}
-#endif
-
static unsigned char mfc3_read_status(struct parport *p)
{
unsigned char status;
@@ -201,14 +174,6 @@ DPRINTK(KERN_DEBUG "read_status %02x\n", status);
return status;
}
-#if 0 /* currently unused */
-static void mfc3_change_mode( struct parport *p, int m)
-{
- /* XXX: This port only has one mode, and I am
- not sure about the corresponding PC-style mode*/
-}
-#endif
-
static int use_cnt = 0;
static irqreturn_t mfc3_interrupt(int irq, void *dev_id)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 0cb64f50cec..402956321d3 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -197,54 +197,6 @@ static int change_mode(struct parport *p, int m)
ECR_WRITE(p, oecr);
return 0;
}
-
-#ifdef CONFIG_PARPORT_1284
-/* Find FIFO lossage; FIFO is reset */
-#if 0
-static int get_fifo_residue(struct parport *p)
-{
- int residue;
- int cnfga;
- const struct parport_pc_private *priv = p->physport->private_data;
-
- /* Adjust for the contents of the FIFO. */
- for (residue = priv->fifo_depth; ; residue--) {
- if (inb(ECONTROL(p)) & 0x2)
- /* Full up. */
- break;
-
- outb(0, FIFO(p));
- }
-
- printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
- residue);
-
- /* Reset the FIFO. */
- frob_set_mode(p, ECR_PS2);
-
- /* Now change to config mode and clean up. FIXME */
- frob_set_mode(p, ECR_CNF);
- cnfga = inb(CONFIGA(p));
- printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
-
- if (!(cnfga & (1<<2))) {
- printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
- residue++;
- }
-
- /* Don't care about partial PWords until support is added for
- * PWord != 1 byte. */
-
- /* Back to PS2 mode. */
- frob_set_mode(p, ECR_PS2);
-
- DPRINTK(KERN_DEBUG
- "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
- inb(ECONTROL(p)));
- return residue;
-}
-#endif /* 0 */
-#endif /* IEEE 1284 support */
#endif /* FIFO support */
/*
@@ -940,234 +892,6 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
return written;
}
-
-#if 0
-static size_t parport_pc_ecp_read_block_pio(struct parport *port,
- void *buf, size_t length,
- int flags)
-{
- size_t left = length;
- size_t fifofull;
- int r;
- const int fifo = FIFO(port);
- const struct parport_pc_private *priv = port->physport->private_data;
- const int fifo_depth = priv->fifo_depth;
- char *bufp = buf;
-
- port = port->physport;
- DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
- dump_parport_state("enter fcn", port);
-
- /* Special case: a timeout of zero means we cannot call schedule().
- * Also if O_NONBLOCK is set then use the default implementation. */
- if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
- /* If the peripheral is allowed to send RLE compressed
- * data, it is possible for a byte to expand to 128
- * bytes in the FIFO. */
- fifofull = 128;
- } else {
- fifofull = fifo_depth;
- }
-
- /* If the caller wants less than a full FIFO's worth of data,
- * go through software emulation. Otherwise we may have to throw
- * away data. */
- if (length < fifofull)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
- /* change to reverse-idle phase (must be in forward-idle) */
-
- /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
- parport_frob_control(port,
- PARPORT_CONTROL_AUTOFD
- | PARPORT_CONTROL_STROBE,
- PARPORT_CONTROL_AUTOFD);
- parport_pc_data_reverse(port); /* Must be in PS2 mode */
- udelay(5);
- /* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control(port,
- PARPORT_CONTROL_INIT,
- 0);
- /* Event 40: Wait for nAckReverse (PError) to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
- if (r) {
- printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
- "in ecp_read_block_pio\n", port->name, r);
- return 0;
- }
- }
-
- /* Set up ECP FIFO mode.*/
-/* parport_pc_frob_control(port,
- PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD); */
- r = change_mode(port, ECR_ECP); /* ECP FIFO */
- if (r)
- printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
- port->name);
-
- port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-
- /* the first byte must be collected manually */
- dump_parport_state("pre 43", port);
- /* Event 43: Wait for nAck to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
- if (r) {
- /* timed out while reading -- no data */
- printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
- goto out_no_data;
- }
- /* read byte */
- *bufp++ = inb(DATA(port));
- left--;
- dump_parport_state("43-44", port);
- /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- 0);
- dump_parport_state("pre 45", port);
- /* Event 45: Wait for nAck to go high */
- /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
- PARPORT_STATUS_ACK); */
- dump_parport_state("post 45", port);
- r = 0;
- if (r) {
- /* timed out while waiting for peripheral to respond to ack */
- printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
-
- /* keep hold of the byte we've got already */
- goto out_no_data;
- }
- /* Event 46: nAutoFd (HostAck) goes low to accept more data */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
-
-
- dump_parport_state("rev idle", port);
- /* Do the transfer. */
- while (left > fifofull) {
- int ret;
- unsigned long expire = jiffies + port->cad->timeout;
- unsigned char ecrval = inb(ECONTROL(port));
-
- if (need_resched() && time_before(jiffies, expire))
- /* Can't yield the port. */
- schedule();
-
- /* At this point, the FIFO may already be full. In
- * that case ECP is already holding back the
- * peripheral (assuming proper design) with a delayed
- * handshake. Work fast to avoid a peripheral
- * timeout. */
-
- if (ecrval & 0x01) {
- /* FIFO is empty. Wait for interrupt. */
- dump_parport_state("FIFO empty", port);
-
- /* Anyone else waiting for the port? */
- if (port->waithead) {
- printk(KERN_DEBUG "Somebody wants the port\n");
- break;
- }
-
- /* Clear serviceIntr */
- ECR_WRITE(port, ecrval & ~(1<<2));
-false_alarm:
- dump_parport_state("waiting", port);
- ret = parport_wait_event(port, HZ);
- DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
- ret);
- if (ret < 0)
- break;
- ret = 0;
- if (!time_before(jiffies, expire)) {
- /* Timed out. */
- dump_parport_state("timeout", port);
- printk(KERN_DEBUG "PIO read timed out\n");
- break;
- }
- ecrval = inb(ECONTROL(port));
- if (!(ecrval & (1<<2))) {
- if (need_resched() &&
- time_before(jiffies, expire)) {
- schedule();
- }
- goto false_alarm;
- }
-
- /* Depending on how the FIFO threshold was
- * set, how long interrupt service took, and
- * how fast the peripheral is, we might be
- * lucky and have a just filled FIFO. */
- continue;
- }
-
- if (ecrval & 0x02) {
- /* FIFO is full. */
- dump_parport_state("FIFO full", port);
- insb(fifo, bufp, fifo_depth);
- bufp += fifo_depth;
- left -= fifo_depth;
- continue;
- }
-
- DPRINTK(KERN_DEBUG
- "*** ecp_read_block_pio: reading one byte from the FIFO\n");
-
- /* FIFO not filled. We will cycle this loop for a while
- * and either the peripheral will fill it faster,
- * tripping a fast empty with insb, or we empty it. */
- *bufp++ = inb(fifo);
- left--;
- }
-
- /* scoop up anything left in the FIFO */
- while (left && !(inb(ECONTROL(port) & 0x01))) {
- *bufp++ = inb(fifo);
- left--;
- }
-
- port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- dump_parport_state("rev idle2", port);
-
-out_no_data:
-
- /* Go to forward idle mode to shut the peripheral up (event 47). */
- parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
-
- /* event 49: PError goes high */
- r = parport_wait_peripheral(port,
- PARPORT_STATUS_PAPEROUT,
- PARPORT_STATUS_PAPEROUT);
- if (r) {
- printk(KERN_DEBUG
- "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
- port->name, r);
- }
-
- port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
-
- /* Finish up. */
- {
- int lost = get_fifo_residue(port);
- if (lost)
- /* Shouldn't happen with compliant peripherals. */
- printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
- port->name, lost);
- }
-
- dump_parport_state("fwd idle", port);
- return length - left;
-}
-#endif /* 0 */
#endif /* IEEE 1284 support */
#endif /* Allowed to use FIFO/DMA */
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 9390a534a2b..983a2d2df65 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -82,27 +82,6 @@ static unsigned char parport_sunbpp_read_data(struct parport *p)
return sbus_readb(&regs->p_dr);
}
-#if 0
-static void control_pc_to_sunbpp(struct parport *p, unsigned char status)
-{
- struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
- unsigned char value_tcr = sbus_readb(&regs->p_tcr);
- unsigned char value_or = sbus_readb(&regs->p_or);
-
- if (status & PARPORT_CONTROL_STROBE)
- value_tcr |= P_TCR_DS;
- if (status & PARPORT_CONTROL_AUTOFD)
- value_or |= P_OR_AFXN;
- if (status & PARPORT_CONTROL_INIT)
- value_or |= P_OR_INIT;
- if (status & PARPORT_CONTROL_SELECT)
- value_or |= P_OR_SLCT_IN;
-
- sbus_writeb(value_or, &regs->p_or);
- sbus_writeb(value_tcr, &regs->p_tcr);
-}
-#endif
-
static unsigned char status_sunbpp_to_pc(struct parport *p)
{
struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h
index 306e7b1c69e..403e007aef6 100644
--- a/include/linux/spi/eeprom.h
+++ b/include/linux/spi/eeprom.h
@@ -20,6 +20,16 @@ struct spi_eeprom {
#define EE_ADDR3 0x0004 /* 24 bit addrs */
#define EE_READONLY 0x0008 /* disallow writes */
+ /*
+ * Certain EEPROMS have a size that is larger than the number of address
+ * bytes would allow (e.g. like M95040 from ST that has 512 Byte size
+ * but uses only one address byte (A0 to A7) for addressing.) For
+ * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte
+ * is used. This instruction bit is normally defined as don't care for
+ * other AT25 like chips.
+ */
+#define EE_INSTR_BIT3_IS_ADDR 0x0010
+
/* for exporting this chip's data to other kernel code */
void (*setup)(struct memory_accessor *mem, void *context);
void *context;