Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits)
  USB: remove unused usb_buffer_alloc and usb_buffer_free macros
  usb: musb: update gfp/slab.h includes
  USB: ftdi_sio: fix legacy SIO-device header
  USB: kl5usb105: reimplement using generic framework
  USB: kl5usb105: minor clean ups
  USB: kl5usb105: fix memory leak
  USB: io_ti: use kfifo to implement write buffering
  USB: io_ti: remove unsused private counter
  USB: ti_usb: use kfifo to implement write buffering
  USB: ir-usb: fix incorrect write-buffer length
  USB: aircable: fix incorrect write-buffer length
  USB: safe_serial: straighten out read processing
  USB: safe_serial: reimplement read using generic framework
  USB: safe_serial: reimplement write using generic framework
  usb-storage: always print quirks
  USB: usb-storage: trivial debug improvements
  USB: oti6858: use port write fifo
  USB: oti6858: use kfifo to implement write buffering
  USB: cypress_m8: use kfifo to implement write buffering
  USB: cypress_m8: remove unused drain define
  ...

Fix up conflicts (due to usb_buffer_alloc/free renaming) in
	drivers/input/tablet/acecad.c
	drivers/input/tablet/kbtab.c
	drivers/input/tablet/wacom_sys.c
	drivers/media/video/gspca/gspca.c
	sound/usb/usbaudio.c

261 files changed, 17242 insertions, 8360 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-bus-usb b/Documentation/ABI/obsolete/sysfs-bus-usb
new file mode 100644
index 00000000000..bd096d33fbc
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-usb
@@ -0,0 +1,31 @@
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, either "on" or "auto".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.
+
+		During normal use, devices should be left in the "auto"
+		level.  The "on" level is meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
+
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
+		This file is deprecated and will be removed after 2010.
+		Use the power/control file instead; it does exactly the
+		same thing.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index bcebb9eaedc..294aa864a60 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -14,34 +14,6 @@ Description:
 		The autosuspend delay for newly-created devices is set to
 		the value of the usbcore.autosuspend module parameter.
 
-What:		/sys/bus/usb/devices/.../power/level
-Date:		March 2007
-KernelVersion:	2.6.21
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		Each USB device directory will contain a file named
-		power/level.  This file holds a power-level setting for
-		the device, either "on" or "auto".
-
-		"on" means that the device is not allowed to autosuspend,
-		although normal suspends for system sleep will still
-		be honored.  "auto" means the device will autosuspend
-		and autoresume in the usual manner, according to the
-		capabilities of its driver.
-
-		During normal use, devices should be left in the "auto"
-		level.  The "on" level is meant for administrative uses.
-		If you want to suspend a device immediately but leave it
-		free to wake up in response to I/O requests, you should
-		write "0" to power/autosuspend.
-
-		Device not capable of proper suspend and resume should be
-		left in the "on" level.  Although the USB spec requires
-		devices to support suspend/resume, many of them do not.
-		In fact so many don't that by default, the USB core
-		initializes all non-hub devices in the "on" level.  Some
-		drivers may change this setting when they are bound.
-
 What:		/sys/bus/usb/devices/.../power/persist
 Date:		May 2007
 KernelVersion:	2.6.23
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
new file mode 100644
index 00000000000..34034027b13
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -0,0 +1,9 @@
+What:		/sys/devices/platform/_UDC_/gadget/suspended
+Date:		April 2010
+Contact:	Fabien Chouteau <fabien.chouteau@barco.com>
+Description:
+		Show the suspend state of an USB composite gadget.
+		1 -> suspended
+		0 -> resumed
+
+		(_UDC_ is the name of the USB Device Controller driver)
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index eeff19ca831..bd97a13fa5a 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -342,7 +342,7 @@ static inline void skel_delete (struct usb_skel *dev)
 {
     kfree (dev->bulk_in_buffer);
     if (dev->bulk_out_buffer != NULL)
-        usb_buffer_free (dev->udev, dev->bulk_out_size,
+        usb_free_coherent (dev->udev, dev->bulk_out_size,
             dev->bulk_out_buffer,
             dev->write_urb->transfer_dma);
     usb_free_urb (dev->write_urb);
diff --git a/Documentation/usb/bulk-streams.txt b/Documentation/usb/bulk-streams.txt
new file mode 100644
index 00000000000..ffc02021863
--- /dev/null
+++ b/Documentation/usb/bulk-streams.txt
@@ -0,0 +1,78 @@
+Background
+==========
+
+Bulk endpoint streams were added in the USB 3.0 specification.  Streams allow a
+device driver to overload a bulk endpoint so that multiple transfers can be
+queued at once.
+
+Streams are defined in sections 4.4.6.4 and 8.12.1.4 of the Universal Serial Bus
+3.0 specification at http://www.usb.org/developers/docs/  The USB Attached SCSI
+Protocol, which uses streams to queue multiple SCSI commands, can be found on
+the T10 website (http://t10.org/).
+
+
+Device-side implications
+========================
+
+Once a buffer has been queued to a stream ring, the device is notified (through
+an out-of-band mechanism on another endpoint) that data is ready for that stream
+ID.  The device then tells the host which "stream" it wants to start.  The host
+can also initiate a transfer on a stream without the device asking, but the
+device can refuse that transfer.  Devices can switch between streams at any
+time.
+
+
+Driver implications
+===================
+
+int usb_alloc_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+
+Device drivers will call this API to request that the host controller driver
+allocate memory so the driver can use up to num_streams stream IDs.  They must
+pass an array of usb_host_endpoints that need to be setup with similar stream
+IDs.  This is to ensure that a UASP driver will be able to use the same stream
+ID for the bulk IN and OUT endpoints used in a Bi-directional command sequence.
+
+The return value is an error condition (if one of the endpoints doesn't support
+streams, or the xHCI driver ran out of memory), or the number of streams the
+host controller allocated for this endpoint.  The xHCI host controller hardware
+declares how many stream IDs it can support, and each bulk endpoint on a
+SuperSpeed device will say how many stream IDs it can handle.  Therefore,
+drivers should be able to deal with being allocated less stream IDs than they
+requested.
+
+Do NOT call this function if you have URBs enqueued for any of the endpoints
+passed in as arguments.  Do not call this function to request less than two
+streams.
+
+Drivers will only be allowed to call this API once for the same endpoint
+without calling usb_free_streams().  This is a simplification for the xHCI host
+controller driver, and may change in the future.
+
+
+Picking new Stream IDs to use
+============================
+
+Stream ID 0 is reserved, and should not be used to communicate with devices.  If
+usb_alloc_streams() returns with a value of N, you may use streams 1 though N.
+To queue an URB for a specific stream, set the urb->stream_id value.  If the
+endpoint does not support streams, an error will be returned.
+
+Note that new API to choose the next stream ID will have to be added if the xHCI
+driver supports secondary stream IDs.
+
+
+Clean up
+========
+
+If a driver wishes to stop using streams to communicate with the device, it
+should call
+
+void usb_free_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
+
+All stream IDs will be deallocated when the driver releases the interface, to
+ensure that drivers that don't support streams will be able to use the endpoint.
diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt
index cfdcd16e3ab..84ef865237d 100644
--- a/Documentation/usb/dma.txt
+++ b/Documentation/usb/dma.txt
@@ -16,11 +16,11 @@ OR:  they can now be DMA-aware.
   manage dma mappings for existing dma-ready buffers (see below).
 
 - URBs have an additional "transfer_dma" field, as well as a transfer_flags
-  bit saying if it's valid.  (Control requests also have "setup_dma" and a
-  corresponding transfer_flags bit.)
+  bit saying if it's valid.  (Control requests also have "setup_dma", but
+  drivers must not use it.)
 
-- "usbcore" will map those DMA addresses, if a DMA-aware driver didn't do
-  it first and set URB_NO_TRANSFER_DMA_MAP or URB_NO_SETUP_DMA_MAP.  HCDs
+- "usbcore" will map this DMA address, if a DMA-aware driver didn't do
+  it first and set URB_NO_TRANSFER_DMA_MAP.  HCDs
   don't manage dma mappings for URBs.
 
 - There's a new "generic DMA API", parts of which are usable by USB device
@@ -43,22 +43,16 @@ and effects like cache-trashing can impose subtle penalties.
   kind of addresses to store in urb->transfer_buffer and urb->transfer_dma.
   You'd also set URB_NO_TRANSFER_DMA_MAP in urb->transfer_flags:
 
-	void *usb_buffer_alloc (struct usb_device *dev, size_t size,
+	void *usb_alloc_coherent (struct usb_device *dev, size_t size,
 		int mem_flags, dma_addr_t *dma);
 
-	void usb_buffer_free (struct usb_device *dev, size_t size,
+	void usb_free_coherent (struct usb_device *dev, size_t size,
 		void *addr, dma_addr_t dma);
 
   Most drivers should *NOT* be using these primitives; they don't need
   to use this type of memory ("dma-coherent"), and memory returned from
   kmalloc() will work just fine.
 
-  For control transfers you can use the buffer primitives or not for each
-  of the transfer buffer and setup buffer independently.  Set the flag bits
-  URB_NO_TRANSFER_DMA_MAP and URB_NO_SETUP_DMA_MAP to indicate which
-  buffers you have prepared.  For non-control transfers URB_NO_SETUP_DMA_MAP
-  is ignored.
-
   The memory buffer returned is "dma-coherent"; sometimes you might need to
   force a consistent memory access ordering by using memory barriers.  It's
   not using a streaming DMA mapping, so it's good for small transfers on
@@ -130,8 +124,8 @@ of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?")
 	void usb_buffer_unmap (struct urb *urb);
 
   The calls manage urb->transfer_dma for you, and set URB_NO_TRANSFER_DMA_MAP
-  so that usbcore won't map or unmap the buffer.  The same goes for
-  urb->setup_dma and URB_NO_SETUP_DMA_MAP for control requests.
+  so that usbcore won't map or unmap the buffer.  They cannot be used for
+  setup_packet buffers in control requests.
 
 Note that several of those interfaces are currently commented out, since
 they don't have current users.  See the source code.  Other than the dmasync
diff --git a/Documentation/usb/gadget_hid.txt b/Documentation/usb/gadget_hid.txt
new file mode 100644
index 00000000000..f4a51f56742
--- /dev/null
+++ b/Documentation/usb/gadget_hid.txt
@@ -0,0 +1,445 @@
+
+		     Linux USB HID gadget driver
+
+Introduction
+
+	The HID Gadget driver provides emulation of USB Human Interface
+	Devices (HID). The basic HID handling is done in the kernel,
+	and HID reports can be sent/received through I/O on the
+	/dev/hidgX character devices.
+
+	For more details about HID, see the developer page on
+	http://www.usb.org/developers/hidpage/
+
+Configuration
+
+	g_hid is a platform driver, so to use it you need to add
+	struct platform_device(s) to your platform code defining the
+	HID function descriptors you want to use - E.G. something
+	like:
+
+#include <linux/platform_device.h>
+#include <linux/usb/g_hid.h>
+
+/* hid descriptor for a keyboard */
+static struct hidg_func_descriptor my_hid_data = {
+	.subclass		= 0, /* No subclass */
+	.protocol		= 1, /* Keyboard */
+	.report_length		= 8,
+	.report_desc_length	= 63,
+	.report_desc		= {
+		0x05, 0x01,	/* USAGE_PAGE (Generic Desktop)	          */
+		0x09, 0x06,	/* USAGE (Keyboard)                       */
+		0xa1, 0x01,	/* COLLECTION (Application)               */
+		0x05, 0x07,	/*   USAGE_PAGE (Keyboard)                */
+		0x19, 0xe0,	/*   USAGE_MINIMUM (Keyboard LeftControl) */
+		0x29, 0xe7,	/*   USAGE_MAXIMUM (Keyboard Right GUI)   */
+		0x15, 0x00,	/*   LOGICAL_MINIMUM (0)                  */
+		0x25, 0x01,	/*   LOGICAL_MAXIMUM (1)                  */
+		0x75, 0x01,	/*   REPORT_SIZE (1)                      */
+		0x95, 0x08,	/*   REPORT_COUNT (8)                     */
+		0x81, 0x02,	/*   INPUT (Data,Var,Abs)                 */
+		0x95, 0x01,	/*   REPORT_COUNT (1)                     */
+		0x75, 0x08,	/*   REPORT_SIZE (8)                      */
+		0x81, 0x03,	/*   INPUT (Cnst,Var,Abs)                 */
+		0x95, 0x05,	/*   REPORT_COUNT (5)                     */
+		0x75, 0x01,	/*   REPORT_SIZE (1)                      */
+		0x05, 0x08,	/*   USAGE_PAGE (LEDs)                    */
+		0x19, 0x01,	/*   USAGE_MINIMUM (Num Lock)             */
+		0x29, 0x05,	/*   USAGE_MAXIMUM (Kana)                 */
+		0x91, 0x02,	/*   OUTPUT (Data,Var,Abs)                */
+		0x95, 0x01,	/*   REPORT_COUNT (1)                     */
+		0x75, 0x03,	/*   REPORT_SIZE (3)                      */
+		0x91, 0x03,	/*   OUTPUT (Cnst,Var,Abs)                */
+		0x95, 0x06,	/*   REPORT_COUNT (6)                     */
+		0x75, 0x08,	/*   REPORT_SIZE (8)                      */
+		0x15, 0x00,	/*   LOGICAL_MINIMUM (0)                  */
+		0x25, 0x65,	/*   LOGICAL_MAXIMUM (101)                */
+		0x05, 0x07,	/*   USAGE_PAGE (Keyboard)                */
+		0x19, 0x00,	/*   USAGE_MINIMUM (Reserved)             */
+		0x29, 0x65,	/*   USAGE_MAXIMUM (Keyboard Application) */
+		0x81, 0x00,	/*   INPUT (Data,Ary,Abs)                 */
+		0xc0		/* END_COLLECTION                         */
+	}
+};
+
+static struct platform_device my_hid = {
+	.name			= "hidg",
+	.id			= 0,
+	.num_resources		= 0,
+	.resource		= 0,
+	.dev.platform_data	= &my_hid_data,
+};
+
+	You can add as many HID functions as you want, only limited by
+	the amount of interrupt endpoints your gadget driver supports.
+
+Send and receive HID reports
+
+	HID reports can be sent/received using read/write on the
+	/dev/hidgX character devices. See below for an example program
+	to do this.
+
+	hid_gadget_test is a small interactive program to test the HID
+ 	gadget driver. To use, point it at a hidg device and set the
+ 	device type (keyboard / mouse / joystick) - E.G.:
+
+		# hid_gadget_test /dev/hidg0 keyboard
+
+	You are now in the prompt of hid_gadget_test. You can type any
+	combination of options and values. Available options and
+	values are listed at program start. In keyboard mode you can
+	send up to six values.
+
+	For example type: g i s t r --left-shift
+
+	Hit return and the corresponding report will be sent by the
+	HID gadget.
+
+	Another interesting example is the caps lock test. Type
+	-–caps-lock and hit return. A report is then sent by the
+	gadget and you should receive the host answer, corresponding
+	to the caps lock LED status.
+
+		--caps-lock
+		recv report:2
+
+	With this command:
+
+		# hid_gadget_test /dev/hidg1 mouse
+
+	You can test the mouse emulation. Values are two signed numbers.
+
+
+Sample code
+
+/* hid_gadget_test */
+
+#include <pthread.h>
+#include <string.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#define BUF_LEN 512
+
+struct options {
+	const char    *opt;
+	unsigned char val;
+};
+
+static struct options kmod[] = {
+	{.opt = "--left-ctrl",		.val = 0x01},
+	{.opt = "--right-ctrl",		.val = 0x10},
+	{.opt = "--left-shift",		.val = 0x02},
+	{.opt = "--right-shift",	.val = 0x20},
+	{.opt = "--left-alt",		.val = 0x04},
+	{.opt = "--right-alt",		.val = 0x40},
+	{.opt = "--left-meta",		.val = 0x08},
+	{.opt = "--right-meta",		.val = 0x80},
+	{.opt = NULL}
+};
+
+static struct options kval[] = {
+	{.opt = "--return",	.val = 0x28},
+	{.opt = "--esc",	.val = 0x29},
+	{.opt = "--bckspc",	.val = 0x2a},
+	{.opt = "--tab",	.val = 0x2b},
+	{.opt = "--spacebar",	.val = 0x2c},
+	{.opt = "--caps-lock",	.val = 0x39},
+	{.opt = "--f1",		.val = 0x3a},
+	{.opt = "--f2",		.val = 0x3b},
+	{.opt = "--f3",		.val = 0x3c},
+	{.opt = "--f4",		.val = 0x3d},
+	{.opt = "--f5",		.val = 0x3e},
+	{.opt = "--f6",		.val = 0x3f},
+	{.opt = "--f7",		.val = 0x40},
+	{.opt = "--f8",		.val = 0x41},
+	{.opt = "--f9",		.val = 0x42},
+	{.opt = "--f10",	.val = 0x43},
+	{.opt = "--f11",	.val = 0x44},
+	{.opt = "--f12",	.val = 0x45},
+	{.opt = "--insert",	.val = 0x49},
+	{.opt = "--home",	.val = 0x4a},
+	{.opt = "--pageup",	.val = 0x4b},
+	{.opt = "--del",	.val = 0x4c},
+	{.opt = "--end",	.val = 0x4d},
+	{.opt = "--pagedown",	.val = 0x4e},
+	{.opt = "--right",	.val = 0x4f},
+	{.opt = "--left",	.val = 0x50},
+	{.opt = "--down",	.val = 0x51},
+	{.opt = "--kp-enter",	.val = 0x58},
+	{.opt = "--up",		.val = 0x52},
+	{.opt = "--num-lock",	.val = 0x53},
+	{.opt = NULL}
+};
+
+int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
+{
+	char *tok = strtok(buf, " ");
+	int key = 0;
+	int i = 0;
+
+	for (; tok != NULL; tok = strtok(NULL, " ")) {
+
+		if (strcmp(tok, "--quit") == 0)
+			return -1;
+
+		if (strcmp(tok, "--hold") == 0) {
+			*hold = 1;
+			continue;
+		}
+
+		if (key < 6) {
+			for (i = 0; kval[i].opt != NULL; i++)
+				if (strcmp(tok, kval[i].opt) == 0) {
+					report[2 + key++] = kval[i].val;
+					break;
+				}
+			if (kval[i].opt != NULL)
+				continue;
+		}
+
+		if (key < 6)
+			if (islower(tok[0])) {
+				report[2 + key++] = (tok[0] - ('a' - 0x04));
+				continue;
+			}
+
+		for (i = 0; kmod[i].opt != NULL; i++)
+			if (strcmp(tok, kmod[i].opt) == 0) {
+				report[0] = report[0] | kmod[i].val;
+				break;
+			}
+		if (kmod[i].opt != NULL)
+			continue;
+
+		if (key < 6)
+			fprintf(stderr, "unknown option: %s\n", tok);
+	}
+	return 8;
+}
+
+static struct options mmod[] = {
+	{.opt = "--b1", .val = 0x01},
+	{.opt = "--b2", .val = 0x02},
+	{.opt = "--b3", .val = 0x04},
+	{.opt = NULL}
+};
+
+int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
+{
+	char *tok = strtok(buf, " ");
+	int mvt = 0;
+	int i = 0;
+	for (; tok != NULL; tok = strtok(NULL, " ")) {
+
+		if (strcmp(tok, "--quit") == 0)
+			return -1;
+
+		if (strcmp(tok, "--hold") == 0) {
+			*hold = 1;
+			continue;
+		}
+
+		for (i = 0; mmod[i].opt != NULL; i++)
+			if (strcmp(tok, mmod[i].opt) == 0) {
+				report[0] = report[0] | mmod[i].val;
+				break;
+			}
+		if (mmod[i].opt != NULL)
+			continue;
+
+		if (!(tok[0] == '-' && tok[1] == '-') && mvt < 2) {
+			errno = 0;
+			report[1 + mvt++] = (char)strtol(tok, NULL, 0);
+			if (errno != 0) {
+				fprintf(stderr, "Bad value:'%s'\n", tok);
+				report[1 + mvt--] = 0;
+			}
+			continue;
+		}
+
+		fprintf(stderr, "unknown option: %s\n", tok);
+	}
+	return 3;
+}
+
+static struct options jmod[] = {
+	{.opt = "--b1",		.val = 0x10},
+	{.opt = "--b2",		.val = 0x20},
+	{.opt = "--b3",		.val = 0x40},
+	{.opt = "--b4",		.val = 0x80},
+	{.opt = "--hat1",	.val = 0x00},
+	{.opt = "--hat2",	.val = 0x01},
+	{.opt = "--hat3",	.val = 0x02},
+	{.opt = "--hat4",	.val = 0x03},
+	{.opt = "--hatneutral",	.val = 0x04},
+	{.opt = NULL}
+};
+
+int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
+{
+	char *tok = strtok(buf, " ");
+	int mvt = 0;
+	int i = 0;
+
+	*hold = 1;
+
+	/* set default hat position: neutral */
+	report[3] = 0x04;
+
+	for (; tok != NULL; tok = strtok(NULL, " ")) {
+
+		if (strcmp(tok, "--quit") == 0)
+			return -1;
+
+		for (i = 0; jmod[i].opt != NULL; i++)
+			if (strcmp(tok, jmod[i].opt) == 0) {
+				report[3] = (report[3] & 0xF0) | jmod[i].val;
+				break;
+			}
+		if (jmod[i].opt != NULL)
+			continue;
+
+		if (!(tok[0] == '-' && tok[1] == '-') && mvt < 3) {
+			errno = 0;
+			report[mvt++] = (char)strtol(tok, NULL, 0);
+			if (errno != 0) {
+				fprintf(stderr, "Bad value:'%s'\n", tok);
+				report[mvt--] = 0;
+			}
+			continue;
+		}
+
+		fprintf(stderr, "unknown option: %s\n", tok);
+	}
+	return 4;
+}
+
+void print_options(char c)
+{
+	int i = 0;
+
+	if (c == 'k') {
+		printf("	keyboard options:\n"
+		       "		--hold\n");
+		for (i = 0; kmod[i].opt != NULL; i++)
+			printf("\t\t%s\n", kmod[i].opt);
+		printf("\n	keyboard values:\n"
+		       "		[a-z] or\n");
+		for (i = 0; kval[i].opt != NULL; i++)
+			printf("\t\t%-8s%s", kval[i].opt, i % 2 ? "\n" : "");
+		printf("\n");
+	} else if (c == 'm') {
+		printf("	mouse options:\n"
+		       "		--hold\n");
+		for (i = 0; mmod[i].opt != NULL; i++)
+			printf("\t\t%s\n", mmod[i].opt);
+		printf("\n	mouse values:\n"
+		       "		Two signed numbers\n"
+		       "--quit to close\n");
+	} else {
+		printf("	joystick options:\n");
+		for (i = 0; jmod[i].opt != NULL; i++)
+			printf("\t\t%s\n", jmod[i].opt);
+		printf("\n	joystick values:\n"
+		       "		three signed numbers\n"
+		       "--quit to close\n");
+	}
+}
+
+int main(int argc, const char *argv[])
+{
+	const char *filename = NULL;
+	int fd = 0;
+	char buf[BUF_LEN];
+	int cmd_len;
+	char report[8];
+	int to_send = 8;
+	int hold = 0;
+	fd_set rfds;
+	int retval, i;
+
+	if (argc < 3) {
+		fprintf(stderr, "Usage: %s devname mouse|keyboard|joystick\n",
+			argv[0]);
+		return 1;
+	}
+
+	if (argv[2][0] != 'k' && argv[2][0] != 'm' && argv[2][0] != 'j')
+	  return 2;
+
+	filename = argv[1];
+
+	if ((fd = open(filename, O_RDWR, 0666)) == -1) {
+		perror(filename);
+		return 3;
+	}
+
+	print_options(argv[2][0]);
+
+	while (42) {
+
+		FD_ZERO(&rfds);
+		FD_SET(STDIN_FILENO, &rfds);
+		FD_SET(fd, &rfds);
+
+		retval = select(fd + 1, &rfds, NULL, NULL, NULL);
+		if (retval == -1 && errno == EINTR)
+			continue;
+		if (retval < 0) {
+			perror("select()");
+			return 4;
+		}
+
+		if (FD_ISSET(fd, &rfds)) {
+			cmd_len = read(fd, buf, BUF_LEN - 1);
+			printf("recv report:");
+			for (i = 0; i < cmd_len; i++)
+				printf(" %02x", buf[i]);
+			printf("\n");
+		}
+
+		if (FD_ISSET(STDIN_FILENO, &rfds)) {
+			memset(report, 0x0, sizeof(report));
+			cmd_len = read(STDIN_FILENO, buf, BUF_LEN - 1);
+
+			if (cmd_len == 0)
+				break;
+
+			buf[cmd_len - 1] = '\0';
+			hold = 0;
+
+			memset(report, 0x0, sizeof(report));
+			if (argv[2][0] == 'k')
+				to_send = keyboard_fill_report(report, buf, &hold);
+			else if (argv[2][0] == 'm')
+				to_send = mouse_fill_report(report, buf, &hold);
+			else
+				to_send = joystick_fill_report(report, buf, &hold);
+
+			if (to_send == -1)
+				break;
+
+			if (write(fd, report, to_send) != to_send) {
+				perror(filename);
+				return 5;
+			}
+			if (!hold) {
+				memset(report, 0x0, sizeof(report));
+				if (write(fd, report, to_send) != to_send) {
+					perror(filename);
+					return 6;
+				}
+			}
+		}
+	}
+
+	close(fd);
+	return 0;
+}
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 2790ad48cfc..b29d8e56cf2 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -107,7 +107,9 @@ allowed to issue dynamic suspends.
 The user interface for controlling dynamic PM is located in the power/
 subdirectory of each USB device's sysfs directory, that is, in
 /sys/bus/usb/devices/.../power/ where "..." is the device's ID.  The
-relevant attribute files are: wakeup, level, and autosuspend.
+relevant attribute files are: wakeup, control, and autosuspend.
+(There may also be a file named "level"; this file was deprecated
+as of the 2.6.35 kernel and replaced by the "control" file.)
 
 	power/wakeup
 
@@ -120,7 +122,7 @@ relevant attribute files are: wakeup, level, and autosuspend.
 		while the device is suspended, the change won't take
 		effect until the following suspend.)
 
-	power/level
+	power/control
 
 		This file contains one of two words: "on" or "auto".
 		You can write those words to the file to change the
@@ -148,14 +150,15 @@ relevant attribute files are: wakeup, level, and autosuspend.
 		never to autosuspend.  You can write a number to the
 		file to change the autosuspend idle-delay time.
 
-Writing "-1" to power/autosuspend and writing "on" to power/level do
+Writing "-1" to power/autosuspend and writing "on" to power/control do
 essentially the same thing -- they both prevent the device from being
 autosuspended.  Yes, this is a redundancy in the API.
 
 (In 2.6.21 writing "0" to power/autosuspend would prevent the device
 from being autosuspended; the behavior was changed in 2.6.22.  The
 power/autosuspend attribute did not exist prior to 2.6.21, and the
-power/level attribute did not exist prior to 2.6.22.)
+power/level attribute did not exist prior to 2.6.22.  power/control
+was added in 2.6.34.)
 
 
 	Changing the default idle-delay time
@@ -212,7 +215,7 @@ among printers and scanners, but plenty of other types of device have
 the same deficiency.
 
 For this reason, by default the kernel disables autosuspend (the
-power/level attribute is initialized to "on") for all devices other
+power/control attribute is initialized to "on") for all devices other
 than hubs.  Hubs, at least, appear to be reasonably well-behaved in
 this regard.
 
@@ -373,7 +376,7 @@ usb_autopm_put_interface() in its close or release routine.  But other
 patterns are possible.
 
 The autosuspend attempts mentioned above will often fail for one
-reason or another.  For example, the power/level attribute might be
+reason or another.  For example, the power/control attribute might be
 set to "on", or another interface in the same device might not be
 idle.  This is perfectly normal.  If the reason for failure was that
 the device hasn't been idle for long enough, a timer is scheduled to
@@ -394,12 +397,12 @@ Drivers can enable autosuspend for their devices by calling
 
 in their probe() routine, if they know that the device is capable of
 suspending and resuming correctly.  This is exactly equivalent to
-writing "auto" to the device's power/level attribute.  Likewise,
+writing "auto" to the device's power/control attribute.  Likewise,
 drivers can disable autosuspend by calling
 
 	usb_disable_autosuspend(struct usb_device *udev);
 
-This is exactly the same as writing "on" to the power/level attribute.
+This is exactly the same as writing "on" to the power/control attribute.
 
 Sometimes a driver needs to make sure that remote wakeup is enabled
 during autosuspend.  For example, there's not much point
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index ff2c1ff57ba..f4d21451025 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -194,6 +194,10 @@ FTDI Single Port Serial Driver
 
   This is a single port DB-25 serial adapter.
 
+  Devices supported include:
+                -TripNav TN-200 USB GPS
+                -Navis Engineering Bureau CH-4711 USB GPS
+
   For any questions or problems with this driver, please contact Bill Ryder.
 
 
@@ -216,7 +220,7 @@ Cypress M8 CY4601 Family Serial Driver
 
     Devices supported:
 
-		-DeLorme's USB Earthmate (SiRF Star II lp arch)
+		-DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
 		-Cypress HID->COM RS232 adapter
 	
 		Note: Cypress Semiconductor claims no affiliation with the
@@ -392,9 +396,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
 Prolific PL2303 Driver
 
   This driver supports any device that has the PL2303 chip from Prolific
-  in it.  This includes a number of single port USB to serial
-  converters and USB GPS devices.  Devices from Aten (the UC-232) and
-  IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
+  in it.  This includes a number of single port USB to serial converters,
+  more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devices
+  from Aten (the UC-232) and IO-Data work with this driver, as does
+  the DCU-11 mobile-phone cable.
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com
@@ -435,6 +440,22 @@ Winchiphead CH341 Driver
   For any questions or problems with this driver, please contact
   frank@kingswood-consulting.co.uk.
 
+Moschip MCS7720, MCS7715 driver
+
+  These chips are present in devices sold by various manufacturers, such as Syba
+  and Cables Unlimited.  There may be others.  The 7720 provides two serial
+  ports, and the 7715 provides one serial and one standard PC parallel port.
+  Support for the 7715's parallel port is enabled by a separate option, which
+  will not appear unless parallel port support is first enabled at the top-level
+  of the Device Drivers config menu.  Currently only compatibility mode is
+  supported on the parallel port (no ECP/EPP).
+
+  TODO:
+    - Implement ECP/EPP modes for the parallel port.
+    - Baud rates higher than 115200 are currently broken.
+    - Devices with a single serial port based on the Moschip MCS7703 may work
+      with this driver with a simple addition to the usb_device_id table.  I
+      don't have one of these devices, so I can't say for sure.
 
 Generic Serial driver
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 017bb2f4f7d..7d7b5bc8dc3 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -702,6 +702,9 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
 		ehci_pdata.reset_gpio_port[1] = 21;
 
+		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
+		musb_board_data.power = 500;
+		musb_board_data.extvbus = 1;
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index ee9f548d5d8..c68f799e83c 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -236,3 +236,158 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 #endif /* CONFIG_USB_EHCI_HCD */
 
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP34XX_OHCI_BASE,
+		.end	= OMAP34XX_OHCI_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_UHH_CONFIG_BASE,
+		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_USBTLL_BASE,
+		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* general IRQ */
+		.start	= INT_34XX_OHCI_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ohci_device = {
+	.name		= "ohci-omap3",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource	= ohci_resources,
+};
+
+static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm1_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm1_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm1_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm1_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm1_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	switch (port_mode[1]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm2_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm2_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm2_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm2_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm2_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	switch (port_mode[2]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm3_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm3_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm3_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm3_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm3_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+}
+
+void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+{
+	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
+
+	/* Setup Pin IO MUX for OHCI */
+	if (cpu_is_omap34xx())
+		setup_ohci_io_mux(pdata->port_mode);
+
+	if (platform_device_register(&ohci_device) < 0) {
+		pr_err("Unable to register FS-USB (OHCI) device\n");
+		return;
+	}
+}
+
+#else
+
+void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+{
+}
+
+#endif /* CONFIG_USB_OHCI_HCD */
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 6d41fa7b2ce..96f6787e00b 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -107,6 +107,7 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 	musb_plat.board_data = board_data;
 	musb_plat.power = board_data->power >> 1;
 	musb_plat.mode = board_data->mode;
+	musb_plat.extvbus = board_data->extvbus;
 
 	if (platform_device_register(&musb_device) < 0)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 876ca8d5e92..98eef5360e6 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -13,6 +13,20 @@ enum ehci_hcd_omap_mode {
 	EHCI_HCD_OMAP_MODE_TLL,
 };
 
+enum ohci_omap3_port_mode {
+	OMAP_OHCI_PORT_MODE_UNUSED,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+};
+
 struct ehci_hcd_omap_platform_data {
 	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			phy_reset:1;
@@ -21,6 +35,13 @@ struct ehci_hcd_omap_platform_data {
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
 };
 
+struct ohci_hcd_omap_platform_data {
+	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+};
+
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -47,6 +68,7 @@ struct omap_musb_board_data {
 	u8	interface_type;
 	u8	mode;
 	u16	power;
+	unsigned extvbus:1;
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
@@ -55,6 +77,8 @@ extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
 extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
 
+extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+
 #endif
 
 void omap_usb_init(struct omap_usb_config *pdata);
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 7b85b696fda..df619756b7a 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -783,13 +783,12 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 
-	usbhid->inbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_KERNEL,
+	usbhid->inbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
 			&usbhid->inbuf_dma);
-	usbhid->outbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_KERNEL,
+	usbhid->outbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
 			&usbhid->outbuf_dma);
-	usbhid->cr = usb_buffer_alloc(dev, sizeof(*usbhid->cr), GFP_KERNEL,
-			&usbhid->cr_dma);
-	usbhid->ctrlbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_KERNEL,
+	usbhid->cr = kmalloc(sizeof(*usbhid->cr), GFP_KERNEL);
+	usbhid->ctrlbuf = usb_alloc_coherent(dev, usbhid->bufsize, GFP_KERNEL,
 			&usbhid->ctrlbuf_dma);
 	if (!usbhid->inbuf || !usbhid->outbuf || !usbhid->cr ||
 			!usbhid->ctrlbuf)
@@ -844,10 +843,10 @@ static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 
-	usb_buffer_free(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
-	usb_buffer_free(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
-	usb_buffer_free(dev, sizeof(*(usbhid->cr)), usbhid->cr, usbhid->cr_dma);
-	usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
+	usb_free_coherent(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma);
+	usb_free_coherent(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma);
+	kfree(usbhid->cr);
+	usb_free_coherent(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
 }
 
 static int usbhid_parse(struct hid_device *hid)
@@ -1007,9 +1006,8 @@ static int usbhid_start(struct hid_device *hid)
 
 	usb_fill_control_urb(usbhid->urbctrl, dev, 0, (void *) usbhid->cr,
 			     usbhid->ctrlbuf, 1, hid_ctrl, hid);
-	usbhid->urbctrl->setup_dma = usbhid->cr_dma;
 	usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
-	usbhid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+	usbhid->urbctrl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
 	if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
 		usbhid_init_reports(hid);
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index ec20400c7f2..693fd3e720d 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -75,7 +75,6 @@ struct usbhid_device {
 
 	struct urb *urbctrl;                                            /* Control URB */
 	struct usb_ctrlrequest *cr;                                     /* Control request struct */
-	dma_addr_t cr_dma;                                              /* Control request struct dma */
 	struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE];  		/* Control fifo */
 	unsigned char ctrlhead, ctrltail;                               /* Control fifo head & tail */
 	char *ctrlbuf;                                                  /* Control buffer */
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index f843443ba5c..bb14c8270af 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -74,7 +74,6 @@ struct usb_kbd {
 	unsigned char *new;
 	struct usb_ctrlrequest *cr;
 	unsigned char *leds;
-	dma_addr_t cr_dma;
 	dma_addr_t new_dma;
 	dma_addr_t leds_dma;
 };
@@ -197,11 +196,11 @@ static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd)
 		return -1;
 	if (!(kbd->led = usb_alloc_urb(0, GFP_KERNEL)))
 		return -1;
-	if (!(kbd->new = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
+	if (!(kbd->new = usb_alloc_coherent(dev, 8, GFP_ATOMIC, &kbd->new_dma)))
 		return -1;
-	if (!(kbd->cr = usb_buffer_alloc(dev, sizeof(struct usb_ctrlrequest), GFP_ATOMIC, &kbd->cr_dma)))
+	if (!(kbd->cr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL)))
 		return -1;
-	if (!(kbd->leds = usb_buffer_alloc(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
+	if (!(kbd->leds = usb_alloc_coherent(dev, 1, GFP_ATOMIC, &kbd->leds_dma)))
 		return -1;
 
 	return 0;
@@ -211,9 +210,9 @@ static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
 {
 	usb_free_urb(kbd->irq);
 	usb_free_urb(kbd->led);
-	usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
-	usb_buffer_free(dev, sizeof(struct usb_ctrlrequest), kbd->cr, kbd->cr_dma);
-	usb_buffer_free(dev, 1, kbd->leds, kbd->leds_dma);
+	usb_free_coherent(dev, 8, kbd->new, kbd->new_dma);
+	kfree(kbd->cr);
+	usb_free_coherent(dev, 1, kbd->leds, kbd->leds_dma);
 }
 
 static int usb_kbd_probe(struct usb_interface *iface,
@@ -304,9 +303,8 @@ static int usb_kbd_probe(struct usb_interface *iface,
 	usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0),
 			     (void *) kbd->cr, kbd->leds, 1,
 			     usb_kbd_led, kbd);
-	kbd->led->setup_dma = kbd->cr_dma;
 	kbd->led->transfer_dma = kbd->leds_dma;
-	kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+	kbd->led->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
 	error = input_register_device(kbd->dev);
 	if (error)
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index 72ab4b26809..79b2bf81a05 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -142,7 +142,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
 	if (!mouse || !input_dev)
 		goto fail1;
 
-	mouse->data = usb_buffer_alloc(dev, 8, GFP_ATOMIC, &mouse->data_dma);
+	mouse->data = usb_alloc_coherent(dev, 8, GFP_ATOMIC, &mouse->data_dma);
 	if (!mouse->data)
 		goto fail1;
 
@@ -205,7 +205,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
 fail3:	
 	usb_free_urb(mouse->irq);
 fail2:	
-	usb_buffer_free(dev, 8, mouse->data, mouse->data_dma);
+	usb_free_coherent(dev, 8, mouse->data, mouse->data_dma);
 fail1:	
 	input_free_device(input_dev);
 	kfree(mouse);
@@ -221,7 +221,7 @@ static void usb_mouse_disconnect(struct usb_interface *intf)
 		usb_kill_urb(mouse->irq);
 		input_unregister_device(mouse->dev);
 		usb_free_urb(mouse->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma);
+		usb_free_coherent(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma);
 		kfree(mouse);
 	}
 }
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 9b3353b404d..c1087ce4cef 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -533,8 +533,8 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
 		return 0;
 
-	xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN,
-				       GFP_KERNEL, &xpad->odata_dma);
+	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
+					 GFP_KERNEL, &xpad->odata_dma);
 	if (!xpad->odata)
 		goto fail1;
 
@@ -554,7 +554,7 @@ static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 
 	return 0;
 
- fail2:	usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+ fail2:	usb_free_coherent(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
  fail1:	return error;
 }
 
@@ -568,7 +568,7 @@ static void xpad_deinit_output(struct usb_xpad *xpad)
 {
 	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX) {
 		usb_free_urb(xpad->irq_out);
-		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
+		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
 				xpad->odata, xpad->odata_dma);
 	}
 }
@@ -788,8 +788,8 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	if (!xpad || !input_dev)
 		goto fail1;
 
-	xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
-				       GFP_KERNEL, &xpad->idata_dma);
+	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
+					 GFP_KERNEL, &xpad->idata_dma);
 	if (!xpad->idata)
 		goto fail1;
 
@@ -942,7 +942,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
  fail5:	usb_kill_urb(xpad->irq_in);
  fail4:	usb_free_urb(xpad->irq_in);
  fail3:	xpad_deinit_output(xpad);
- fail2:	usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+ fail2:	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
  fail1:	input_free_device(input_dev);
 	kfree(xpad);
 	return error;
@@ -964,7 +964,7 @@ static void xpad_disconnect(struct usb_interface *intf)
 			usb_kill_urb(xpad->irq_in);
 		}
 		usb_free_urb(xpad->irq_in);
-		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
+		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
 				xpad->idata, xpad->idata_dma);
 		kfree(xpad);
 	}
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index e8bbc619f6d..bce57129afb 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -624,13 +624,13 @@ static void ati_remote_irq_in(struct urb *urb)
 static int ati_remote_alloc_buffers(struct usb_device *udev,
 				    struct ati_remote *ati_remote)
 {
-	ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
-					     &ati_remote->inbuf_dma);
+	ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+					       &ati_remote->inbuf_dma);
 	if (!ati_remote->inbuf)
 		return -1;
 
-	ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, GFP_ATOMIC,
-					      &ati_remote->outbuf_dma);
+	ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC,
+					        &ati_remote->outbuf_dma);
 	if (!ati_remote->outbuf)
 		return -1;
 
@@ -653,10 +653,10 @@ static void ati_remote_free_buffers(struct ati_remote *ati_remote)
 	usb_free_urb(ati_remote->irq_urb);
 	usb_free_urb(ati_remote->out_urb);
 
-	usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+	usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
 		ati_remote->inbuf, ati_remote->inbuf_dma);
 
-	usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+	usb_free_coherent(ati_remote->udev, DATA_BUFSIZE,
 		ati_remote->outbuf, ati_remote->outbuf_dma);
 }
 
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 2124b99378b..e148749b585 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -589,7 +589,7 @@ static int ati_remote2_urb_init(struct ati_remote2 *ar2)
 	int i, pipe, maxp;
 
 	for (i = 0; i < 2; i++) {
-		ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
+		ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
 		if (!ar2->buf[i])
 			return -ENOMEM;
 
@@ -617,7 +617,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
 
 	for (i = 0; i < 2; i++) {
 		usb_free_urb(ar2->urb[i]);
-		usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
+		usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
 	}
 }
 
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 86457feccfc..2b0eba6619b 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -102,7 +102,6 @@ struct cm109_dev {
 	struct cm109_ctl_packet *ctl_data;
 	dma_addr_t ctl_dma;
 	struct usb_ctrlrequest *ctl_req;
-	dma_addr_t ctl_req_dma;
 	struct urb *urb_ctl;
 	/*
 	 * The 3 bitfields below are protected by ctl_submit_lock.
@@ -629,15 +628,13 @@ static const struct usb_device_id cm109_usb_table[] = {
 
 static void cm109_usb_cleanup(struct cm109_dev *dev)
 {
-	if (dev->ctl_req)
-		usb_buffer_free(dev->udev, sizeof(*(dev->ctl_req)),
-				dev->ctl_req, dev->ctl_req_dma);
+	kfree(dev->ctl_req);
 	if (dev->ctl_data)
-		usb_buffer_free(dev->udev, USB_PKT_LEN,
-				dev->ctl_data, dev->ctl_dma);
+		usb_free_coherent(dev->udev, USB_PKT_LEN,
+				  dev->ctl_data, dev->ctl_dma);
 	if (dev->irq_data)
-		usb_buffer_free(dev->udev, USB_PKT_LEN,
-				dev->irq_data, dev->irq_dma);
+		usb_free_coherent(dev->udev, USB_PKT_LEN,
+				  dev->irq_data, dev->irq_dma);
 
 	usb_free_urb(dev->urb_irq);	/* parameter validation in core/urb */
 	usb_free_urb(dev->urb_ctl);	/* parameter validation in core/urb */
@@ -686,18 +683,17 @@ static int cm109_usb_probe(struct usb_interface *intf,
 		goto err_out;
 
 	/* allocate usb buffers */
-	dev->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
-					 GFP_KERNEL, &dev->irq_dma);
+	dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
+					   GFP_KERNEL, &dev->irq_dma);
 	if (!dev->irq_data)
 		goto err_out;
 
-	dev->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
-					 GFP_KERNEL, &dev->ctl_dma);
+	dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
+					   GFP_KERNEL, &dev->ctl_dma);
 	if (!dev->ctl_data)
 		goto err_out;
 
-	dev->ctl_req = usb_buffer_alloc(udev, sizeof(*(dev->ctl_req)),
-					GFP_KERNEL, &dev->ctl_req_dma);
+	dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
 	if (!dev->ctl_req)
 		goto err_out;
 
@@ -735,10 +731,8 @@ static int cm109_usb_probe(struct usb_interface *intf,
 	usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
 			     (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
 			     cm109_urb_ctl_callback, dev);
-	dev->urb_ctl->setup_dma = dev->ctl_req_dma;
 	dev->urb_ctl->transfer_dma = dev->ctl_dma;
-	dev->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP |
-					URB_NO_TRANSFER_DMA_MAP;
+	dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	dev->urb_ctl->dev = udev;
 
 	/* find out the physical bus location */
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 86afdd1fdf9..a93c525475c 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -464,7 +464,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
 	remote->in_endpoint = endpoint;
 	remote->toggle = -1;	/* Set to -1 so we will always not match the toggle from the first remote message. */
 
-	remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
+	remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
 	if (!remote->in_buffer) {
 		error = -ENOMEM;
 		goto fail1;
@@ -543,7 +543,7 @@ static int keyspan_probe(struct usb_interface *interface, const struct usb_devic
 	return 0;
 
  fail3:	usb_free_urb(remote->irq_urb);
- fail2:	usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ fail2:	usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
  fail1:	kfree(remote);
 	input_free_device(input_dev);
 
@@ -564,7 +564,7 @@ static void keyspan_disconnect(struct usb_interface *interface)
 		input_unregister_device(remote->input);
 		usb_kill_urb(remote->irq_urb);
 		usb_free_urb(remote->irq_urb);
-		usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+		usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
 		kfree(remote);
 	}
 }
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 668913d1204..bf170f6b442 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -64,7 +64,6 @@ struct powermate_device {
 	dma_addr_t data_dma;
 	struct urb *irq, *config;
 	struct usb_ctrlrequest *configcr;
-	dma_addr_t configcr_dma;
 	struct usb_device *udev;
 	struct input_dev *input;
 	spinlock_t lock;
@@ -182,8 +181,6 @@ static void powermate_sync_state(struct powermate_device *pm)
 	usb_fill_control_urb(pm->config, pm->udev, usb_sndctrlpipe(pm->udev, 0),
 			     (void *) pm->configcr, NULL, 0,
 			     powermate_config_complete, pm);
-	pm->config->setup_dma = pm->configcr_dma;
-	pm->config->transfer_flags |= URB_NO_SETUP_DMA_MAP;
 
 	if (usb_submit_urb(pm->config, GFP_ATOMIC))
 		printk(KERN_ERR "powermate: usb_submit_urb(config) failed");
@@ -276,13 +273,12 @@ static int powermate_input_event(struct input_dev *dev, unsigned int type, unsig
 
 static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_device *pm)
 {
-	pm->data = usb_buffer_alloc(udev, POWERMATE_PAYLOAD_SIZE_MAX,
-				    GFP_ATOMIC, &pm->data_dma);
+	pm->data = usb_alloc_coherent(udev, POWERMATE_PAYLOAD_SIZE_MAX,
+				      GFP_ATOMIC, &pm->data_dma);
 	if (!pm->data)
 		return -1;
 
-	pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
-					GFP_ATOMIC, &pm->configcr_dma);
+	pm->configcr = kmalloc(sizeof(*(pm->configcr)), GFP_KERNEL);
 	if (!pm->configcr)
 		return -1;
 
@@ -291,10 +287,9 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev
 
 static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm)
 {
-	usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX,
-			pm->data, pm->data_dma);
-	usb_buffer_free(udev, sizeof(*(pm->configcr)),
-			pm->configcr, pm->configcr_dma);
+	usb_free_coherent(udev, POWERMATE_PAYLOAD_SIZE_MAX,
+			  pm->data, pm->data_dma);
+	kfree(pm->configcr);
 }
 
 /* Called whenever a USB device matching one in our supported devices table is connected */
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 93a22ac0f88..41201c6b5e6 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -111,7 +111,6 @@ struct yealink_dev {
 	struct yld_ctl_packet	*ctl_data;
 	dma_addr_t		ctl_dma;
 	struct usb_ctrlrequest	*ctl_req;
-	dma_addr_t		ctl_req_dma;
 	struct urb		*urb_ctl;
 
 	char phys[64];			/* physical device path */
@@ -836,12 +835,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 	usb_free_urb(yld->urb_irq);
 	usb_free_urb(yld->urb_ctl);
 
-	usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
-			yld->ctl_req, yld->ctl_req_dma);
-	usb_buffer_free(yld->udev, USB_PKT_LEN,
-			yld->ctl_data, yld->ctl_dma);
-	usb_buffer_free(yld->udev, USB_PKT_LEN,
-			yld->irq_data, yld->irq_dma);
+	kfree(yld->ctl_req);
+	usb_free_coherent(yld->udev, USB_PKT_LEN, yld->ctl_data, yld->ctl_dma);
+	usb_free_coherent(yld->udev, USB_PKT_LEN, yld->irq_data, yld->irq_dma);
 
 	kfree(yld);
 	return err;
@@ -886,18 +882,17 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		return usb_cleanup(yld, -ENOMEM);
 
 	/* allocate usb buffers */
-	yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
-					GFP_ATOMIC, &yld->irq_dma);
+	yld->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
+					   GFP_ATOMIC, &yld->irq_dma);
 	if (yld->irq_data == NULL)
 		return usb_cleanup(yld, -ENOMEM);
 
-	yld->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN,
-					GFP_ATOMIC, &yld->ctl_dma);
+	yld->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
+					   GFP_ATOMIC, &yld->ctl_dma);
 	if (!yld->ctl_data)
 		return usb_cleanup(yld, -ENOMEM);
 
-	yld->ctl_req = usb_buffer_alloc(udev, sizeof(*(yld->ctl_req)),
-					GFP_ATOMIC, &yld->ctl_req_dma);
+	yld->ctl_req = kmalloc(sizeof(*(yld->ctl_req)), GFP_KERNEL);
 	if (yld->ctl_req == NULL)
 		return usb_cleanup(yld, -ENOMEM);
 
@@ -936,10 +931,8 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	usb_fill_control_urb(yld->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
 			(void *)yld->ctl_req, yld->ctl_data, USB_PKT_LEN,
 			urb_ctl_callback, yld);
-	yld->urb_ctl->setup_dma	= yld->ctl_req_dma;
 	yld->urb_ctl->transfer_dma	= yld->ctl_dma;
-	yld->urb_ctl->transfer_flags	|= URB_NO_SETUP_DMA_MAP |
-					URB_NO_TRANSFER_DMA_MAP;
+	yld->urb_ctl->transfer_flags	|= URB_NO_TRANSFER_DMA_MAP;
 	yld->urb_ctl->dev = udev;
 
 	/* find out the physical bus location */
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 53ec7ddd182..05edd75abca 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -806,8 +806,8 @@ static int atp_probe(struct usb_interface *iface,
 	if (!dev->urb)
 		goto err_free_devs;
 
-	dev->data = usb_buffer_alloc(dev->udev, dev->info->datalen, GFP_KERNEL,
-				     &dev->urb->transfer_dma);
+	dev->data = usb_alloc_coherent(dev->udev, dev->info->datalen, GFP_KERNEL,
+				       &dev->urb->transfer_dma);
 	if (!dev->data)
 		goto err_free_urb;
 
@@ -862,8 +862,8 @@ static int atp_probe(struct usb_interface *iface,
 	return 0;
 
  err_free_buffer:
-	usb_buffer_free(dev->udev, dev->info->datalen,
-			dev->data, dev->urb->transfer_dma);
+	usb_free_coherent(dev->udev, dev->info->datalen,
+			  dev->data, dev->urb->transfer_dma);
  err_free_urb:
 	usb_free_urb(dev->urb);
  err_free_devs:
@@ -881,8 +881,8 @@ static void atp_disconnect(struct usb_interface *iface)
 	if (dev) {
 		usb_kill_urb(dev->urb);
 		input_unregister_device(dev->input);
-		usb_buffer_free(dev->udev, dev->info->datalen,
-				dev->data, dev->urb->transfer_dma);
+		usb_free_coherent(dev->udev, dev->info->datalen,
+				  dev->data, dev->urb->transfer_dma);
 		usb_free_urb(dev->urb);
 		kfree(dev);
 	}
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index b89879bd860..6dedded2722 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -715,15 +715,15 @@ static int bcm5974_probe(struct usb_interface *iface,
 	if (!dev->tp_urb)
 		goto err_free_bt_urb;
 
-	dev->bt_data = usb_buffer_alloc(dev->udev,
-					dev->cfg.bt_datalen, GFP_KERNEL,
-					&dev->bt_urb->transfer_dma);
+	dev->bt_data = usb_alloc_coherent(dev->udev,
+					  dev->cfg.bt_datalen, GFP_KERNEL,
+					  &dev->bt_urb->transfer_dma);
 	if (!dev->bt_data)
 		goto err_free_urb;
 
-	dev->tp_data = usb_buffer_alloc(dev->udev,
-					dev->cfg.tp_datalen, GFP_KERNEL,
-					&dev->tp_urb->transfer_dma);
+	dev->tp_data = usb_alloc_coherent(dev->udev,
+					  dev->cfg.tp_datalen, GFP_KERNEL,
+					  &dev->tp_urb->transfer_dma);
 	if (!dev->tp_data)
 		goto err_free_bt_buffer;
 
@@ -765,10 +765,10 @@ static int bcm5974_probe(struct usb_interface *iface,
 	return 0;
 
 err_free_buffer:
-	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+	usb_free_coherent(dev->udev, dev->cfg.tp_datalen,
 		dev->tp_data, dev->tp_urb->transfer_dma);
 err_free_bt_buffer:
-	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+	usb_free_coherent(dev->udev, dev->cfg.bt_datalen,
 		dev->bt_data, dev->bt_urb->transfer_dma);
 err_free_urb:
 	usb_free_urb(dev->tp_urb);
@@ -788,10 +788,10 @@ static void bcm5974_disconnect(struct usb_interface *iface)
 	usb_set_intfdata(iface, NULL);
 
 	input_unregister_device(dev->input);
-	usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
-			dev->tp_data, dev->tp_urb->transfer_dma);
-	usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
-			dev->bt_data, dev->bt_urb->transfer_dma);
+	usb_free_coherent(dev->udev, dev->cfg.tp_datalen,
+			  dev->tp_data, dev->tp_urb->transfer_dma);
+	usb_free_coherent(dev->udev, dev->cfg.bt_datalen,
+			  dev->bt_data, dev->bt_urb->transfer_dma);
 	usb_free_urb(dev->tp_urb);
 	usb_free_urb(dev->bt_urb);
 	kfree(dev);
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index 37d0539fefa..aea9a9399a3 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -155,7 +155,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 		goto fail1;
 	}
 
-	acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma);
+	acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma);
 	if (!acecad->data) {
 		err= -ENOMEM;
 		goto fail1;
@@ -235,7 +235,7 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 
 	return 0;
 
- fail2:	usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
+ fail2:	usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
  fail1: input_free_device(input_dev);
 	kfree(acecad);
 	return err;
@@ -249,7 +249,7 @@ static void usb_acecad_disconnect(struct usb_interface *intf)
 
 	input_unregister_device(acecad->input);
 	usb_free_urb(acecad->irq);
-	usb_buffer_free(acecad->usbdev, 8, acecad->data, acecad->data_dma);
+	usb_free_coherent(acecad->usbdev, 8, acecad->data, acecad->data_dma);
 	kfree(acecad);
 }
 
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 4be039d7dca..51b80b08d46 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1711,8 +1711,8 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto fail1;
         }
 
-	aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
-					GFP_ATOMIC, &aiptek->data_dma);
+	aiptek->data = usb_alloc_coherent(usbdev, AIPTEK_PACKET_LENGTH,
+					  GFP_ATOMIC, &aiptek->data_dma);
         if (!aiptek->data) {
 		dev_warn(&intf->dev, "cannot allocate usb buffer\n");
 		goto fail1;
@@ -1884,8 +1884,8 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
  fail4:	sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
  fail3: usb_free_urb(aiptek->urb);
- fail2:	usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
-			aiptek->data_dma);
+ fail2:	usb_free_coherent(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+			  aiptek->data_dma);
  fail1: usb_set_intfdata(intf, NULL);
 	input_free_device(inputdev);
 	kfree(aiptek);
@@ -1909,9 +1909,9 @@ static void aiptek_disconnect(struct usb_interface *intf)
 		input_unregister_device(aiptek->inputdev);
 		sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
 		usb_free_urb(aiptek->urb);
-		usb_buffer_free(interface_to_usbdev(intf),
-				AIPTEK_PACKET_LENGTH,
-				aiptek->data, aiptek->data_dma);
+		usb_free_coherent(interface_to_usbdev(intf),
+				  AIPTEK_PACKET_LENGTH,
+				  aiptek->data, aiptek->data_dma);
 		kfree(aiptek);
 	}
 }
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 866a9ee1af1..8ea6afe2e99 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -850,8 +850,8 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
 
 	/* Allocate some data for incoming reports */
-	gtco->buffer = usb_buffer_alloc(gtco->usbdev, REPORT_MAX_SIZE,
-					GFP_KERNEL, &gtco->buf_dma);
+	gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+					  GFP_KERNEL, &gtco->buf_dma);
 	if (!gtco->buffer) {
 		err("No more memory for us buffers");
 		error = -ENOMEM;
@@ -982,8 +982,8 @@ static int gtco_probe(struct usb_interface *usbinterface,
  err_free_urb:
 	usb_free_urb(gtco->urbinfo);
  err_free_buf:
-	usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
-			gtco->buffer, gtco->buf_dma);
+	usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+			  gtco->buffer, gtco->buf_dma);
  err_free_devs:
 	input_free_device(input_dev);
 	kfree(gtco);
@@ -1005,8 +1005,8 @@ static void gtco_disconnect(struct usb_interface *interface)
 		input_unregister_device(gtco->inputdevice);
 		usb_kill_urb(gtco->urbinfo);
 		usb_free_urb(gtco->urbinfo);
-		usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
-				gtco->buffer, gtco->buf_dma);
+		usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+				  gtco->buffer, gtco->buf_dma);
 		kfree(gtco);
 	}
 
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
index b9969f12024..290f4e57b58 100644
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -122,7 +122,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (!kbtab || !input_dev)
 		goto fail1;
 
-	kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma);
+	kbtab->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &kbtab->data_dma);
 	if (!kbtab->data)
 		goto fail1;
 
@@ -173,7 +173,7 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i
 	return 0;
 
  fail3:	usb_free_urb(kbtab->irq);
- fail2:	usb_buffer_free(dev, 8, kbtab->data, kbtab->data_dma);
+ fail2:	usb_free_coherent(dev, 8, kbtab->data, kbtab->data_dma);
  fail1:	input_free_device(input_dev);
 	kfree(kbtab);
 	return error;
@@ -187,7 +187,7 @@ static void kbtab_disconnect(struct usb_interface *intf)
 
 	input_unregister_device(kbtab->dev);
 	usb_free_urb(kbtab->irq);
-	usb_buffer_free(kbtab->usbdev, 8, kbtab->data, kbtab->data_dma);
+	usb_free_coherent(kbtab->usbdev, 8, kbtab->data, kbtab->data_dma);
 	kfree(kbtab);
 }
 
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d90f4e00e51..2dc0c07c046 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -465,8 +465,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 		goto fail1;
 	}
 
-	wacom_wac->data = usb_buffer_alloc(dev, WACOM_PKGLEN_MAX,
-					   GFP_KERNEL, &wacom->data_dma);
+	wacom_wac->data = usb_alloc_coherent(dev, WACOM_PKGLEN_MAX,
+					     GFP_KERNEL, &wacom->data_dma);
 	if (!wacom_wac->data) {
 		error = -ENOMEM;
 		goto fail1;
@@ -536,7 +536,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
  fail4:	wacom_remove_shared_data(wacom_wac);
  fail3:	usb_free_urb(wacom->irq);
- fail2:	usb_buffer_free(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
+ fail2:	usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
  fail1:	input_free_device(input_dev);
 	kfree(wacom);
 	return error;
@@ -551,7 +551,7 @@ static void wacom_disconnect(struct usb_interface *intf)
 	usb_kill_urb(wacom->irq);
 	input_unregister_device(wacom->wacom_wac.input);
 	usb_free_urb(wacom->irq);
-	usb_buffer_free(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
+	usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
 			wacom->wacom_wac.data, wacom->data_dma);
 	wacom_remove_shared_data(&wacom->wacom_wac);
 	kfree(wacom);
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 0b0ae2e17a6..29a8bbf3f08 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -1290,8 +1290,8 @@ static void usbtouch_close(struct input_dev *input)
 static void usbtouch_free_buffers(struct usb_device *udev,
 				  struct usbtouch_usb *usbtouch)
 {
-	usb_buffer_free(udev, usbtouch->type->rept_size,
-	                usbtouch->data, usbtouch->data_dma);
+	usb_free_coherent(udev, usbtouch->type->rept_size,
+			  usbtouch->data, usbtouch->data_dma);
 	kfree(usbtouch->buffer);
 }
 
@@ -1335,8 +1335,8 @@ static int usbtouch_probe(struct usb_interface *intf,
 	if (!type->process_pkt)
 		type->process_pkt = usbtouch_process_pkt;
 
-	usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
-	                                  GFP_KERNEL, &usbtouch->data_dma);
+	usbtouch->data = usb_alloc_coherent(udev, type->rept_size,
+					    GFP_KERNEL, &usbtouch->data_dma);
 	if (!usbtouch->data)
 		goto out_free;
 
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index f9702e3756b..86d68933b6b 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -96,8 +96,9 @@ static int usb_free_stream_buffers(struct usb_data_stream *stream)
 		while (stream->buf_num) {
 			stream->buf_num--;
 			deb_mem("freeing buffer %d\n",stream->buf_num);
-			usb_buffer_free(stream->udev, stream->buf_size,
-					stream->buf_list[stream->buf_num], stream->dma_addr[stream->buf_num]);
+			usb_free_coherent(stream->udev, stream->buf_size,
+					  stream->buf_list[stream->buf_num],
+					  stream->dma_addr[stream->buf_num]);
 		}
 	}
 
@@ -116,7 +117,7 @@ static int usb_allocate_stream_buffers(struct usb_data_stream *stream, int num,
 	for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) {
 		deb_mem("allocating buffer %d\n",stream->buf_num);
 		if (( stream->buf_list[stream->buf_num] =
-					usb_buffer_alloc(stream->udev, size, GFP_ATOMIC,
+					usb_alloc_coherent(stream->udev, size, GFP_ATOMIC,
 					&stream->dma_addr[stream->buf_num]) ) == NULL) {
 			deb_mem("not enough memory for urb-buffer allocation.\n");
 			usb_free_stream_buffers(stream);
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 53baccbab17..fe1b8037b24 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1257,7 +1257,7 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec)
 		if(!dec->irq_urb) {
 			return -ENOMEM;
 		}
-		dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
+		dec->irq_buffer = usb_alloc_coherent(dec->udev,IRQ_PACKET_SIZE,
 					GFP_ATOMIC, &dec->irq_dma_handle);
 		if(!dec->irq_buffer) {
 			usb_free_urb(dec->irq_urb);
@@ -1550,8 +1550,8 @@ static void ttusb_dec_exit_rc(struct ttusb_dec *dec)
 
 	usb_free_urb(dec->irq_urb);
 
-	usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,
-			   dec->irq_buffer, dec->irq_dma_handle);
+	usb_free_coherent(dec->udev,IRQ_PACKET_SIZE,
+			  dec->irq_buffer, dec->irq_dma_handle);
 
 	if (dec->rc_input_dev) {
 		input_unregister_device(dec->rc_input_dev);
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 66150216f97..52f25aabb6d 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -177,7 +177,7 @@ void au0828_uninit_isoc(struct au0828_dev *dev)
 				usb_unlink_urb(urb);
 
 			if (dev->isoc_ctl.transfer_buffer[i]) {
-				usb_buffer_free(dev->usbdev,
+				usb_free_coherent(dev->usbdev,
 					urb->transfer_buffer_length,
 					dev->isoc_ctl.transfer_buffer[i],
 					urb->transfer_dma);
@@ -247,7 +247,7 @@ int au0828_init_isoc(struct au0828_dev *dev, int max_packets,
 		}
 		dev->isoc_ctl.urb[i] = urb;
 
-		dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->usbdev,
+		dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev,
 			sb_size, GFP_KERNEL, &urb->transfer_dma);
 		if (!dev->isoc_ctl.transfer_buffer[i]) {
 			printk("unable to allocate %i bytes for transfer"
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index f5e1a2315fc..912a4d74020 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -676,11 +676,11 @@ void cx231xx_uninit_isoc(struct cx231xx *dev)
 				usb_unlink_urb(urb);
 
 			if (dev->video_mode.isoc_ctl.transfer_buffer[i]) {
-				usb_buffer_free(dev->udev,
-						urb->transfer_buffer_length,
-						dev->video_mode.isoc_ctl.
-						transfer_buffer[i],
-						urb->transfer_dma);
+				usb_free_coherent(dev->udev,
+						  urb->transfer_buffer_length,
+						  dev->video_mode.isoc_ctl.
+						  transfer_buffer[i],
+						  urb->transfer_dma);
 			}
 			usb_free_urb(urb);
 			dev->video_mode.isoc_ctl.urb[i] = NULL;
@@ -767,8 +767,8 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets,
 		dev->video_mode.isoc_ctl.urb[i] = urb;
 
 		dev->video_mode.isoc_ctl.transfer_buffer[i] =
-		    usb_buffer_alloc(dev->udev, sb_size, GFP_KERNEL,
-				     &urb->transfer_dma);
+		    usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
+				       &urb->transfer_dma);
 		if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
 			cx231xx_err("unable to allocate %i bytes for transfer"
 				    " buffer %i%s\n",
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index d3813ed789d..331e1cac427 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -970,7 +970,7 @@ void em28xx_uninit_isoc(struct em28xx *dev)
 				usb_unlink_urb(urb);
 
 			if (dev->isoc_ctl.transfer_buffer[i]) {
-				usb_buffer_free(dev->udev,
+				usb_free_coherent(dev->udev,
 					urb->transfer_buffer_length,
 					dev->isoc_ctl.transfer_buffer[i],
 					urb->transfer_dma);
@@ -1045,7 +1045,7 @@ int em28xx_init_isoc(struct em28xx *dev, int max_packets,
 		}
 		dev->isoc_ctl.urb[i] = urb;
 
-		dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->udev,
+		dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->udev,
 			sb_size, GFP_KERNEL, &urb->transfer_dma);
 		if (!dev->isoc_ctl.transfer_buffer[i]) {
 			em28xx_err("unable to allocate %i bytes for transfer"
diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c
index 43ac4af8d3e..fce8d949264 100644
--- a/drivers/media/video/gspca/benq.c
+++ b/drivers/media/video/gspca/benq.c
@@ -117,13 +117,13 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			return -ENOMEM;
 		}
 		gspca_dev->urb[n] = urb;
-		urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
+		urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
 						SD_PKT_SZ * SD_NPKT,
 						GFP_KERNEL,
 						&urb->transfer_dma);
 
 		if (urb->transfer_buffer == NULL) {
-			err("usb_buffer_alloc failed");
+			err("usb_alloc_coherent failed");
 			return -ENOMEM;
 		}
 		urb->dev = gspca_dev->dev;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index efe61593878..678675bb365 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -213,7 +213,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 		goto error;
 	}
 
-	buffer = usb_buffer_alloc(dev, buffer_len,
+	buffer = usb_alloc_coherent(dev, buffer_len,
 				GFP_KERNEL, &urb->transfer_dma);
 	if (!buffer) {
 		ret = -ENOMEM;
@@ -232,10 +232,10 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 	return ret;
 
 error_submit:
-	usb_buffer_free(dev,
-			urb->transfer_buffer_length,
-			urb->transfer_buffer,
-			urb->transfer_dma);
+	usb_free_coherent(dev,
+			  urb->transfer_buffer_length,
+			  urb->transfer_buffer,
+			  urb->transfer_dma);
 error_buffer:
 	usb_free_urb(urb);
 error:
@@ -272,10 +272,10 @@ static void gspca_input_destroy_urb(struct gspca_dev *gspca_dev)
 	if (urb) {
 		gspca_dev->int_urb = NULL;
 		usb_kill_urb(urb);
-		usb_buffer_free(gspca_dev->dev,
-				urb->transfer_buffer_length,
-				urb->transfer_buffer,
-				urb->transfer_dma);
+		usb_free_coherent(gspca_dev->dev,
+				  urb->transfer_buffer_length,
+				  urb->transfer_buffer,
+				  urb->transfer_dma);
 		usb_free_urb(urb);
 	}
 }
@@ -605,10 +605,10 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
 		gspca_dev->urb[i] = NULL;
 		usb_kill_urb(urb);
 		if (urb->transfer_buffer != NULL)
-			usb_buffer_free(gspca_dev->dev,
-					urb->transfer_buffer_length,
-					urb->transfer_buffer,
-					urb->transfer_dma);
+			usb_free_coherent(gspca_dev->dev,
+					  urb->transfer_buffer_length,
+					  urb->transfer_buffer,
+					  urb->transfer_dma);
 		usb_free_urb(urb);
 	}
 }
@@ -760,13 +760,13 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 			return -ENOMEM;
 		}
 		gspca_dev->urb[n] = urb;
-		urb->transfer_buffer = usb_buffer_alloc(gspca_dev->dev,
+		urb->transfer_buffer = usb_alloc_coherent(gspca_dev->dev,
 						bsize,
 						GFP_KERNEL,
 						&urb->transfer_dma);
 
 		if (urb->transfer_buffer == NULL) {
-			err("usb_buffer_alloc failed");
+			err("usb_alloc_coherent failed");
 			return -ENOMEM;
 		}
 		urb->dev = gspca_dev->dev;
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index d2f0ee29737..7cfccfd1b87 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -92,8 +92,8 @@ static int hdpvr_free_queue(struct list_head *q)
 		buf = list_entry(p, struct hdpvr_buffer, buff_list);
 
 		urb = buf->urb;
-		usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-				urb->transfer_buffer, urb->transfer_dma);
+		usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+				  urb->transfer_buffer, urb->transfer_dma);
 		usb_free_urb(urb);
 		tmp = p->next;
 		list_del(p);
@@ -143,8 +143,8 @@ int hdpvr_alloc_buffers(struct hdpvr_device *dev, uint count)
 		}
 		buf->urb = urb;
 
-		mem = usb_buffer_alloc(dev->udev, dev->bulk_in_size, GFP_KERNEL,
-				       &urb->transfer_dma);
+		mem = usb_alloc_coherent(dev->udev, dev->bulk_in_size, GFP_KERNEL,
+					 &urb->transfer_dma);
 		if (!mem) {
 			v4l2_err(&dev->v4l2_dev,
 				 "cannot allocate usb transfer buffer\n");
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
index c267e0cfb54..256cc558ba1 100644
--- a/drivers/media/video/tlg2300/pd-main.c
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -454,8 +454,8 @@ static int poseidon_probe(struct usb_interface *interface,
 
 	device_init_wakeup(&udev->dev, 1);
 #ifdef CONFIG_PM
-	pd->udev->autosuspend_disabled = 0;
 	pd->udev->autosuspend_delay = HZ * PM_SUSPEND_DELAY;
+	usb_enable_autosuspend(pd->udev);
 
 	if (in_hibernation(pd)) {
 		INIT_WORK(&pd->pm_work, hibernation_resume);
diff --git a/drivers/media/video/tlg2300/pd-video.c b/drivers/media/video/tlg2300/pd-video.c
index c750fd115ec..d0cc012f7ae 100644
--- a/drivers/media/video/tlg2300/pd-video.c
+++ b/drivers/media/video/tlg2300/pd-video.c
@@ -478,10 +478,10 @@ static int prepare_iso_urb(struct video_data *video)
 			goto out;
 
 		video->urb_array[i] = urb;
-		mem = usb_buffer_alloc(udev,
-					ISO_PKT_SIZE * PK_PER_URB,
-					GFP_KERNEL,
-					&urb->transfer_dma);
+		mem = usb_alloc_coherent(udev,
+					 ISO_PKT_SIZE * PK_PER_URB,
+					 GFP_KERNEL,
+					 &urb->transfer_dma);
 
 		urb->complete	= urb_complete_iso;	/* handler */
 		urb->dev	= udev;
@@ -521,8 +521,8 @@ int alloc_bulk_urbs_generic(struct urb **urb_array, int num,
 		if (urb == NULL)
 			return i;
 
-		mem = usb_buffer_alloc(udev, buf_size, gfp_flags,
-					&urb->transfer_dma);
+		mem = usb_alloc_coherent(udev, buf_size, gfp_flags,
+					 &urb->transfer_dma);
 		if (mem == NULL)
 			return i;
 
@@ -542,7 +542,7 @@ void free_all_urb_generic(struct urb **urb_array, int num)
 	for (i = 0; i < num; i++) {
 		urb = urb_array[i];
 		if (urb) {
-			usb_buffer_free(urb->dev,
+			usb_free_coherent(urb->dev,
 					urb->transfer_buffer_length,
 					urb->transfer_buffer,
 					urb->transfer_dma);
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index f7aae229375..b9dd74fde21 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -2493,10 +2493,10 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 		}
 		usbvision->sbuf[bufIdx].urb = urb;
 		usbvision->sbuf[bufIdx].data =
-			usb_buffer_alloc(usbvision->dev,
-					 sb_size,
-					 GFP_KERNEL,
-					 &urb->transfer_dma);
+			usb_alloc_coherent(usbvision->dev,
+					   sb_size,
+					   GFP_KERNEL,
+					   &urb->transfer_dma);
 		urb->dev = dev;
 		urb->context = usbvision;
 		urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp);
@@ -2552,10 +2552,10 @@ void usbvision_stop_isoc(struct usb_usbvision *usbvision)
 	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
 		usb_kill_urb(usbvision->sbuf[bufIdx].urb);
 		if (usbvision->sbuf[bufIdx].data){
-			usb_buffer_free(usbvision->dev,
-					sb_size,
-					usbvision->sbuf[bufIdx].data,
-					usbvision->sbuf[bufIdx].urb->transfer_dma);
+			usb_free_coherent(usbvision->dev,
+					  sb_size,
+					  usbvision->sbuf[bufIdx].data,
+					  usbvision->sbuf[bufIdx].urb->transfer_dma);
 		}
 		usb_free_urb(usbvision->sbuf[bufIdx].urb);
 		usbvision->sbuf[bufIdx].urb = NULL;
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 821a9969b7b..53f3ef4635e 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -739,7 +739,7 @@ static void uvc_free_urb_buffers(struct uvc_streaming *stream)
 
 	for (i = 0; i < UVC_URBS; ++i) {
 		if (stream->urb_buffer[i]) {
-			usb_buffer_free(stream->dev->udev, stream->urb_size,
+			usb_free_coherent(stream->dev->udev, stream->urb_size,
 				stream->urb_buffer[i], stream->urb_dma[i]);
 			stream->urb_buffer[i] = NULL;
 		}
@@ -780,7 +780,7 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream,
 	for (; npackets > 1; npackets /= 2) {
 		for (i = 0; i < UVC_URBS; ++i) {
 			stream->urb_size = psize * npackets;
-			stream->urb_buffer[i] = usb_buffer_alloc(
+			stream->urb_buffer[i] = usb_alloc_coherent(
 				stream->dev->udev, stream->urb_size,
 				gfp_flags | __GFP_NOWARN, &stream->urb_dma[i]);
 			if (!stream->urb_buffer[i]) {
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index df0a6369d2f..1fc0871d2ef 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -512,8 +512,8 @@ static void ems_usb_write_bulk_callback(struct urb *urb)
 	netdev = dev->netdev;
 
 	/* free up our allocated buffer */
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 
 	atomic_dec(&dev->active_tx_urbs);
 
@@ -610,8 +610,8 @@ static int ems_usb_start(struct ems_usb *dev)
 			return -ENOMEM;
 		}
 
-		buf = usb_buffer_alloc(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
-				       &urb->transfer_dma);
+		buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
+					 &urb->transfer_dma);
 		if (!buf) {
 			dev_err(netdev->dev.parent,
 				"No memory left for USB buffer\n");
@@ -631,8 +631,8 @@ static int ems_usb_start(struct ems_usb *dev)
 				netif_device_detach(dev->netdev);
 
 			usb_unanchor_urb(urb);
-			usb_buffer_free(dev->udev, RX_BUFFER_SIZE, buf,
-					urb->transfer_dma);
+			usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
+					  urb->transfer_dma);
 			break;
 		}
 
@@ -773,7 +773,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 		goto nomem;
 	}
 
-	buf = usb_buffer_alloc(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
+	buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
 	if (!buf) {
 		dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
 		usb_free_urb(urb);
@@ -816,7 +816,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	 */
 	if (!context) {
 		usb_unanchor_urb(urb);
-		usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+		usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
 
 		dev_warn(netdev->dev.parent, "couldn't find free context\n");
 
@@ -841,7 +841,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 		can_free_echo_skb(netdev, context->echo_index);
 
 		usb_unanchor_urb(urb);
-		usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+		usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
 		dev_kfree_skb(skb);
 
 		atomic_dec(&dev->active_tx_urbs);
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 418825d26f9..197c352c47f 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -128,17 +128,13 @@ static int ipheth_alloc_urbs(struct ipheth_device *iphone)
 	if (rx_urb == NULL)
 		goto free_tx_urb;
 
-	tx_buf = usb_buffer_alloc(iphone->udev,
-				  IPHETH_BUF_SIZE,
-				  GFP_KERNEL,
-				  &tx_urb->transfer_dma);
+	tx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+				    GFP_KERNEL, &tx_urb->transfer_dma);
 	if (tx_buf == NULL)
 		goto free_rx_urb;
 
-	rx_buf = usb_buffer_alloc(iphone->udev,
-				  IPHETH_BUF_SIZE,
-				  GFP_KERNEL,
-				  &rx_urb->transfer_dma);
+	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+				    GFP_KERNEL, &rx_urb->transfer_dma);
 	if (rx_buf == NULL)
 		goto free_tx_buf;
 
@@ -150,8 +146,8 @@ static int ipheth_alloc_urbs(struct ipheth_device *iphone)
 	return 0;
 
 free_tx_buf:
-	usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
-			tx_urb->transfer_dma);
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
+			  tx_urb->transfer_dma);
 free_rx_urb:
 	usb_free_urb(rx_urb);
 free_tx_urb:
@@ -162,10 +158,10 @@ error_nomem:
 
 static void ipheth_free_urbs(struct ipheth_device *iphone)
 {
-	usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
-			iphone->rx_urb->transfer_dma);
-	usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
-			iphone->tx_urb->transfer_dma);
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
+			  iphone->rx_urb->transfer_dma);
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
+			  iphone->tx_urb->transfer_dma);
 	usb_free_urb(iphone->rx_urb);
 	usb_free_urb(iphone->tx_urb);
 }
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 46890dc625d..d6078b8c427 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -1155,13 +1155,13 @@ err_fw:
 	if (!kaweth->irq_urb)
 		goto err_tx_and_rx;
 
-	kaweth->intbuffer = usb_buffer_alloc(	kaweth->dev,
+	kaweth->intbuffer = usb_alloc_coherent(	kaweth->dev,
 						INTBUFFERSIZE,
 						GFP_KERNEL,
 						&kaweth->intbufferhandle);
 	if (!kaweth->intbuffer)
 		goto err_tx_and_rx_and_irq;
-	kaweth->rx_buf = usb_buffer_alloc(	kaweth->dev,
+	kaweth->rx_buf = usb_alloc_coherent(	kaweth->dev,
 						KAWETH_BUF_SIZE,
 						GFP_KERNEL,
 						&kaweth->rxbufferhandle);
@@ -1202,9 +1202,9 @@ err_fw:
 
 err_intfdata:
 	usb_set_intfdata(intf, NULL);
-	usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+	usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
 err_all_but_rxbuf:
-	usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+	usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
 err_tx_and_rx_and_irq:
 	usb_free_urb(kaweth->irq_urb);
 err_tx_and_rx:
@@ -1241,8 +1241,8 @@ static void kaweth_disconnect(struct usb_interface *intf)
 	usb_free_urb(kaweth->tx_urb);
 	usb_free_urb(kaweth->irq_urb);
 
-	usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
-	usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+	usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+	usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
 
 	free_netdev(netdev);
 }
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 16341ffc3df..0d5081d77dc 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -514,7 +514,7 @@ int i2400mu_probe(struct usb_interface *iface,
 	iface->needs_remote_wakeup = 1;		/* autosuspend (15s delay) */
 	device_init_wakeup(dev, 1);
 	usb_dev->autosuspend_delay = 15 * HZ;
-	usb_dev->autosuspend_disabled = 0;
+	usb_enable_autosuspend(usb_dev);
 #endif
 
 	result = i2400m_setup(i2400m, I2400M_BRI_MAC_REINIT);
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index abd083a357f..82ab532a492 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -215,7 +215,7 @@ resubmit:
 	return;
 
 free:
-	usb_buffer_free(aru->udev, 64, urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(aru->udev, 64, urb->transfer_buffer, urb->transfer_dma);
 }
 
 static void ar9170_usb_rx_completed(struct urb *urb)
@@ -296,7 +296,7 @@ static int ar9170_usb_alloc_rx_irq_urb(struct ar9170_usb *aru)
 	if (!urb)
 		goto out;
 
-	ibuf = usb_buffer_alloc(aru->udev, 64, GFP_KERNEL, &urb->transfer_dma);
+	ibuf = usb_alloc_coherent(aru->udev, 64, GFP_KERNEL, &urb->transfer_dma);
 	if (!ibuf)
 		goto out;
 
@@ -309,8 +309,8 @@ static int ar9170_usb_alloc_rx_irq_urb(struct ar9170_usb *aru)
 	err = usb_submit_urb(urb, GFP_KERNEL);
 	if (err) {
 		usb_unanchor_urb(urb);
-		usb_buffer_free(aru->udev, 64, urb->transfer_buffer,
-				urb->transfer_dma);
+		usb_free_coherent(aru->udev, 64, urb->transfer_buffer,
+				  urb->transfer_dma);
 	}
 
 out:
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index d91ad1a612a..c257940b71b 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -664,15 +664,15 @@ static struct urb *alloc_rx_urb(struct zd_usb *usb)
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return NULL;
-	buffer = usb_buffer_alloc(udev, USB_MAX_RX_SIZE, GFP_KERNEL,
-		                  &urb->transfer_dma);
+	buffer = usb_alloc_coherent(udev, USB_MAX_RX_SIZE, GFP_KERNEL,
+				    &urb->transfer_dma);
 	if (!buffer) {
 		usb_free_urb(urb);
 		return NULL;
 	}
 
 	usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN),
-		          buffer, USB_MAX_RX_SIZE,
+			  buffer, USB_MAX_RX_SIZE,
 			  rx_urb_complete, usb);
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
@@ -683,8 +683,8 @@ static void free_rx_urb(struct urb *urb)
 {
 	if (!urb)
 		return;
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-		        urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 	usb_free_urb(urb);
 }
 
diff --git a/drivers/staging/rt2860/iface/rtmp_usb.h b/drivers/staging/rt2860/iface/rtmp_usb.h
index 6bb384a7466..33479cc443a 100644
--- a/drivers/staging/rt2860/iface/rtmp_usb.h
+++ b/drivers/staging/rt2860/iface/rtmp_usb.h
@@ -81,8 +81,8 @@ extern u8 EpToQueue[6];
 #define RT28XX_PUT_DEVICE							usb_put_dev
 #define RTUSB_ALLOC_URB(iso)							usb_alloc_urb(iso, GFP_ATOMIC)
 #define RTUSB_SUBMIT_URB(pUrb)							usb_submit_urb(pUrb, GFP_ATOMIC)
-#define RTUSB_URB_ALLOC_BUFFER(pUsb_Dev, BufSize, pDma_addr)			usb_buffer_alloc(pUsb_Dev, BufSize, GFP_ATOMIC, pDma_addr)
-#define RTUSB_URB_FREE_BUFFER(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)	usb_buffer_free(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)
+#define RTUSB_URB_ALLOC_BUFFER(pUsb_Dev, BufSize, pDma_addr)			usb_alloc_coherent(pUsb_Dev, BufSize, GFP_ATOMIC, pDma_addr)
+#define RTUSB_URB_FREE_BUFFER(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)	usb_free_coherent(pUsb_Dev, BufSize, pTransferBuf, Dma_addr)
 
 #define RTUSB_FREE_URB(pUrb)	usb_free_urb(pUrb)
 
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index a78ade0dc68..aa8195199a2 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -1508,8 +1508,8 @@ static void dlfb_free_urb_list(struct dlfb_data *dev)
 		urb = unode->urb;
 
 		/* Free each separately allocated piece */
-		usb_buffer_free(urb->dev, dev->urbs.size,
-			urb->transfer_buffer, urb->transfer_dma);
+		usb_free_coherent(urb->dev, dev->urbs.size,
+				  urb->transfer_buffer, urb->transfer_dma);
 		usb_free_urb(urb);
 		kfree(node);
 	}
@@ -1543,8 +1543,8 @@ static int dlfb_alloc_urb_list(struct dlfb_data *dev, int count, size_t size)
 		}
 		unode->urb = urb;
 
-		buf = usb_buffer_alloc(dev->udev, MAX_TRANSFER, GFP_KERNEL,
-					&urb->transfer_dma);
+		buf = usb_alloc_coherent(dev->udev, MAX_TRANSFER, GFP_KERNEL,
+					 &urb->transfer_dma);
 		if (!buf) {
 			kfree(unode);
 			usb_free_urb(urb);
diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c
index bc267408667..da30658fa04 100644
--- a/drivers/staging/usbip/stub_rx.c
+++ b/drivers/staging/usbip/stub_rx.c
@@ -21,7 +21,7 @@
 
 #include "usbip_common.h"
 #include "stub.h"
-#include "../../usb/core/hcd.h"
+#include <linux/usb/hcd.h>
 
 
 static int is_clear_halt_cmd(struct urb *urb)
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index e3fa4216c1c..52408164036 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -562,7 +562,7 @@ EXPORT_SYMBOL_GPL(sockfd_to_socket);
 /* there may be more cases to tweak the flags. */
 static unsigned int tweak_transfer_flags(unsigned int flags)
 {
-	flags &= ~(URB_NO_TRANSFER_DMA_MAP|URB_NO_SETUP_DMA_MAP);
+	flags &= ~URB_NO_TRANSFER_DMA_MAP;
 	return flags;
 }
 
diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h
index 5e375173bbc..41a1fe5138f 100644
--- a/drivers/staging/usbip/vhci.h
+++ b/drivers/staging/usbip/vhci.h
@@ -18,7 +18,7 @@
  */
 
 #include <linux/platform_device.h>
-#include "../../usb/core/hcd.h"
+#include <linux/usb/hcd.h>
 
 
 struct vhci_device {
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 25f01b536f6..e213d3fa492 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -94,19 +94,19 @@
 	} while (0)
 
 #define uea_enters(usb_dev) \
-	uea_vdbg(usb_dev, "entering %s\n", __func__)
+	uea_vdbg(usb_dev, "entering %s\n" , __func__)
 
 #define uea_leaves(usb_dev) \
-	uea_vdbg(usb_dev, "leaving  %s\n", __func__)
+	uea_vdbg(usb_dev, "leaving  %s\n" , __func__)
 
-#define uea_err(usb_dev, format,args...) \
-	dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args)
+#define uea_err(usb_dev, format, args...) \
+	dev_err(&(usb_dev)->dev , "[UEAGLE-ATM] " format , ##args)
 
-#define uea_warn(usb_dev, format,args...) \
-	dev_warn(&(usb_dev)->dev ,"[Ueagle-atm] " format, ##args)
+#define uea_warn(usb_dev, format, args...) \
+	dev_warn(&(usb_dev)->dev , "[Ueagle-atm] " format, ##args)
 
-#define uea_info(usb_dev, format,args...) \
-	dev_info(&(usb_dev)->dev ,"[ueagle-atm] " format, ##args)
+#define uea_info(usb_dev, format, args...) \
+	dev_info(&(usb_dev)->dev , "[ueagle-atm] " format, ##args)
 
 struct intr_pkt;
 
@@ -289,7 +289,7 @@ enum {
 #define IS_ISDN(x) \
 	((x)->annex & ANNEXB)
 
-#define INS_TO_USBDEV(ins) ins->usb_dev
+#define INS_TO_USBDEV(ins) (ins->usb_dev)
 
 #define GET_STATUS(data) \
 	((data >> 8) & 0xf)
@@ -304,7 +304,7 @@ enum {
  * The FW_GET_BYTE() macro is provided only for consistency.
  */
 
-#define FW_GET_BYTE(p)	*((__u8 *) (p))
+#define FW_GET_BYTE(p) (*((__u8 *) (p)))
 
 #define FW_DIR "ueagle-atm/"
 #define UEA_FW_NAME_MAX 30
@@ -315,7 +315,7 @@ enum {
 
 #define ACK_TIMEOUT msecs_to_jiffies(3000)
 
-#define UEA_INTR_IFACE_NO 	0
+#define UEA_INTR_IFACE_NO	0
 #define UEA_US_IFACE_NO		1
 #define UEA_DS_IFACE_NO		2
 
@@ -326,9 +326,9 @@ enum {
 #define UEA_INTR_PIPE		0x04
 #define UEA_ISO_DATA_PIPE	0x08
 
-#define UEA_E1_SET_BLOCK    	0x0001
+#define UEA_E1_SET_BLOCK	0x0001
 #define UEA_E4_SET_BLOCK	0x002c
-#define UEA_SET_MODE     	0x0003
+#define UEA_SET_MODE		0x0003
 #define UEA_SET_2183_DATA	0x0004
 #define UEA_SET_TIMEOUT		0x0011
 
@@ -366,7 +366,7 @@ struct l1_code {
 	u8 string_header[E4_L1_STRING_HEADER];
 	u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
 	struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
-	u8 code [0];
+	u8 code[0];
 } __attribute__ ((packed));
 
 /* structures describing a block within a DSP page */
@@ -428,7 +428,8 @@ struct block_info_e4 {
 #define E4_MODEMREADY  0x1
 
 #define E1_MAKEFUNCTION(t, s) (((t) & 0xf) << 4 | ((s) & 0xf))
-#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | ((st) & 0xf) << 4 | ((s) & 0xf))
+#define E4_MAKEFUNCTION(t, st, s) (((t) & 0xf) << 8 | \
+	((st) & 0xf) << 4 | ((s) & 0xf))
 
 #define E1_MAKESA(a, b, c, d)						\
 	(((c) & 0xff) << 24 |						\
@@ -473,7 +474,7 @@ struct cmv_e4 {
 	__be16 wFunction;
 	__be16 wOffset;
 	__be16 wAddress;
-	__be32 dwData [6];
+	__be32 dwData[6];
 } __attribute__ ((packed));
 
 /* structures representing swap information */
@@ -534,11 +535,13 @@ struct intr_pkt {
 
 static struct usb_driver uea_driver;
 static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
+static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III",
+								"Eagle IV"};
 
 static int modem_index;
 static unsigned int debug;
-static unsigned int altsetting[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
+static unsigned int altsetting[NB_MODEM] = {
+				[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
 static int sync_wait[NB_MODEM];
 static char *cmv_file[NB_MODEM];
 static int annex[NB_MODEM];
@@ -555,7 +558,7 @@ MODULE_PARM_DESC(cmv_file,
 		"file name with configuration and management variables");
 module_param_array(annex, uint, NULL, 0644);
 MODULE_PARM_DESC(annex,
-                 "manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
+		"manually set annex a/b (0=auto, 1=annex a, 2=annex b)");
 
 #define uea_wait(sc, cond, timeo) \
 ({ \
@@ -602,7 +605,8 @@ static int uea_send_modem_cmd(struct usb_device *usb,
 	return (ret == size) ? 0 : -EIO;
 }
 
-static void uea_upload_pre_firmware(const struct firmware *fw_entry, void *context)
+static void uea_upload_pre_firmware(const struct firmware *fw_entry,
+								void *context)
 {
 	struct usb_device *usb = context;
 	const u8 *pfw;
@@ -707,7 +711,8 @@ static int uea_load_firmware(struct usb_device *usb, unsigned int ver)
 	}
 
 	ret = request_firmware_nowait(THIS_MODULE, 1, fw_name, &usb->dev,
-				      GFP_KERNEL, usb, uea_upload_pre_firmware);
+					GFP_KERNEL, usb,
+					uea_upload_pre_firmware);
 	if (ret)
 		uea_err(usb, "firmware %s is not available\n", fw_name);
 	else
@@ -876,7 +881,7 @@ static int request_dsp(struct uea_softc *sc)
 	if (ret < 0) {
 		uea_err(INS_TO_USBDEV(sc),
 		       "requesting firmware %s failed with error %d\n",
-		        dsp_name, ret);
+			dsp_name, ret);
 		return ret;
 	}
 
@@ -994,14 +999,17 @@ static void __uea_load_page_e4(struct uea_softc *sc, u8 pageno, int boot)
 
 		blockidx = &p->page_header[blockno];
 		blocksize = E4_PAGE_BYTES(blockidx->PageSize);
-		blockoffset = sc->dsp_firm->data + le32_to_cpu(blockidx->PageOffset);
+		blockoffset = sc->dsp_firm->data + le32_to_cpu(
+							blockidx->PageOffset);
 
 		bi.dwSize = cpu_to_be32(blocksize);
 		bi.dwAddress = cpu_to_be32(le32_to_cpu(blockidx->PageAddress));
 
 		uea_dbg(INS_TO_USBDEV(sc),
-		       "sending block %u for DSP page %u size %u address %x\n",
-		       blockno, pageno, blocksize, le32_to_cpu(blockidx->PageAddress));
+			"sending block %u for DSP page "
+			"%u size %u address %x\n",
+			blockno, pageno, blocksize,
+			le32_to_cpu(blockidx->PageAddress));
 
 		/* send block info through the IDMA pipe */
 		if (uea_idma_write(sc, &bi, E4_BLOCK_INFO_SIZE))
@@ -1042,7 +1050,8 @@ static void uea_load_page_e4(struct work_struct *work)
 
 	p = (struct l1_code *) sc->dsp_firm->data;
 	if (pageno >= le16_to_cpu(p->page_header[0].PageNumber)) {
-		uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
+		uea_err(INS_TO_USBDEV(sc), "invalid DSP "
+						"page %u requested\n", pageno);
 		return;
 	}
 
@@ -1059,7 +1068,7 @@ static void uea_load_page_e4(struct work_struct *work)
 			__uea_load_page_e4(sc, i, 1);
 	}
 
-	uea_dbg(INS_TO_USBDEV(sc),"sending start bi\n");
+	uea_dbg(INS_TO_USBDEV(sc) , "sending start bi\n");
 
 	bi.wHdr = cpu_to_be16(UEA_BIHDR);
 	bi.bBootPage = 0;
@@ -1139,8 +1148,10 @@ static int uea_cmv_e1(struct uea_softc *sc,
 	uea_enters(INS_TO_USBDEV(sc));
 	uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
 			"offset : 0x%04x, data : 0x%08x\n",
-			E1_FUNCTION_TYPE(function), E1_FUNCTION_SUBTYPE(function),
-			E1_GETSA1(address), E1_GETSA2(address), E1_GETSA3(address),
+			E1_FUNCTION_TYPE(function),
+			E1_FUNCTION_SUBTYPE(function),
+			E1_GETSA1(address), E1_GETSA2(address),
+			E1_GETSA3(address),
 			E1_GETSA4(address), offset, data);
 
 	/* we send a request, but we expect a reply */
@@ -1157,7 +1168,8 @@ static int uea_cmv_e1(struct uea_softc *sc,
 	cmv.wOffsetAddress = cpu_to_le16(offset);
 	put_unaligned_le32(data >> 16 | data << 16, &cmv.dwData);
 
-	ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
+	ret = uea_request(sc, UEA_E1_SET_BLOCK, UEA_MPTX_START,
+							sizeof(cmv), &cmv);
 	if (ret < 0)
 		return ret;
 	ret = wait_cmv_ack(sc);
@@ -1191,7 +1203,8 @@ static int uea_cmv_e4(struct uea_softc *sc,
 	cmv.wOffset = cpu_to_be16(offset);
 	cmv.dwData[0] = cpu_to_be32(data);
 
-	ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START, sizeof(cmv), &cmv);
+	ret = uea_request(sc, UEA_E4_SET_BLOCK, UEA_MPTX_START,
+							sizeof(cmv), &cmv);
 	if (ret < 0)
 		return ret;
 	ret = wait_cmv_ack(sc);
@@ -1208,7 +1221,7 @@ static inline int uea_read_cmv_e1(struct uea_softc *sc,
 		uea_err(INS_TO_USBDEV(sc),
 			"reading cmv failed with error %d\n", ret);
 	else
-	 	*data = sc->data;
+		*data = sc->data;
 
 	return ret;
 }
@@ -1216,13 +1229,14 @@ static inline int uea_read_cmv_e1(struct uea_softc *sc,
 static inline int uea_read_cmv_e4(struct uea_softc *sc,
 		u8 size, u16 group, u16 address, u16 offset, u32 *data)
 {
-	int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTREAD, size),
+	int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
+							E4_REQUESTREAD, size),
 			  group, address, offset, 0);
 	if (ret < 0)
 		uea_err(INS_TO_USBDEV(sc),
 			"reading cmv failed with error %d\n", ret);
 	else {
-	 	*data = sc->data;
+		*data = sc->data;
 		/* size is in 16-bit word quantities */
 		if (size > 2)
 			*(data + 1) = sc->data1;
@@ -1245,7 +1259,8 @@ static inline int uea_write_cmv_e1(struct uea_softc *sc,
 static inline int uea_write_cmv_e4(struct uea_softc *sc,
 		u8 size, u16 group, u16 address, u16 offset, u32 data)
 {
-	int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS, E4_REQUESTWRITE, size),
+	int ret = uea_cmv_e4(sc, E4_MAKEFUNCTION(E4_MEMACCESS,
+							E4_REQUESTWRITE, size),
 			  group, address, offset, data);
 	if (ret < 0)
 		uea_err(INS_TO_USBDEV(sc),
@@ -1442,27 +1457,29 @@ static int uea_stat_e4(struct uea_softc *sc)
 		return ret;
 
 	switch (sc->stats.phy.state) {
-		case 0x0:	/* not yet synchronized */
-		case 0x1:
-		case 0x3:
-		case 0x4:
-			uea_dbg(INS_TO_USBDEV(sc), "modem not yet synchronized\n");
-			return 0;
-		case 0x5:	/* initialization */
-		case 0x6:
-		case 0x9:
-		case 0xa:
-			uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
-			return 0;
-		case 0x2:	/* fail ... */
-			uea_info(INS_TO_USBDEV(sc), "modem synchronization failed"
-					" (may be try other cmv/dsp)\n");
-			return -EAGAIN;
-		case 0x7: 	/* operational */
-			break;
-		default:
-			uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n", sc->stats.phy.state);
-			return 0;
+	case 0x0:	/* not yet synchronized */
+	case 0x1:
+	case 0x3:
+	case 0x4:
+		uea_dbg(INS_TO_USBDEV(sc), "modem not yet "
+						"synchronized\n");
+		return 0;
+	case 0x5:	/* initialization */
+	case 0x6:
+	case 0x9:
+	case 0xa:
+		uea_dbg(INS_TO_USBDEV(sc), "modem initializing\n");
+		return 0;
+	case 0x2:	/* fail ... */
+		uea_info(INS_TO_USBDEV(sc), "modem synchronization "
+				"failed (may be try other cmv/dsp)\n");
+		return -EAGAIN;
+	case 0x7:	/* operational */
+		break;
+	default:
+		uea_warn(INS_TO_USBDEV(sc), "unknown state: %x\n",
+						sc->stats.phy.state);
+		return 0;
 	}
 
 	if (data != 7) {
@@ -1502,9 +1519,9 @@ static int uea_stat_e4(struct uea_softc *sc)
 	if (sc->stats.phy.flags) {
 		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
 		       sc->stats.phy.flags);
-		if (sc->stats.phy.flags & 1) //delineation LOSS
+		if (sc->stats.phy.flags & 1) /* delineation LOSS */
 			return -EAGAIN;
-		if (sc->stats.phy.flags & 0x4000) //Reset Flag
+		if (sc->stats.phy.flags & 0x4000) /* Reset Flag */
 			return -EAGAIN;
 		return 0;
 	}
@@ -1618,7 +1635,8 @@ static int request_cmvs(struct uea_softc *sc,
 	if (ret < 0) {
 		/* if caller can handle old version, try to provide it */
 		if (*ver == 1) {
-			uea_warn(INS_TO_USBDEV(sc), "requesting firmware %s failed, "
+			uea_warn(INS_TO_USBDEV(sc), "requesting "
+							"firmware %s failed, "
 				"try to get older cmvs\n", cmv_name);
 			return request_cmvs_old(sc, cmvs, fw);
 		}
@@ -1632,8 +1650,8 @@ static int request_cmvs(struct uea_softc *sc,
 	data = (u8 *) (*fw)->data;
 	if (size < 4 || strncmp(data, "cmv2", 4) != 0) {
 		if (*ver == 1) {
-			uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted, "
-				"try to get older cmvs\n", cmv_name);
+			uea_warn(INS_TO_USBDEV(sc), "firmware %s is corrupted,"
+				" try to get older cmvs\n", cmv_name);
 			release_firmware(*fw);
 			return request_cmvs_old(sc, cmvs, fw);
 		}
@@ -1670,7 +1688,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 	int i, ret, len;
 	void *cmvs_ptr;
 	const struct firmware *cmvs_fw;
-	int ver = 1; // we can handle v1 cmv firmware version;
+	int ver = 1; /* we can handle v1 cmv firmware version; */
 
 	/* Enter in R-IDLE (cmv) until instructed otherwise */
 	ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 1);
@@ -1685,7 +1703,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 			sc->stats.phy.firmid);
 
 	/* get options */
- 	ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+	ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
 	if (ret < 0)
 		return ret;
 
@@ -1697,9 +1715,10 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 			"please update your firmware\n");
 
 		for (i = 0; i < len; i++) {
-			ret = uea_write_cmv_e1(sc, get_unaligned_le32(&cmvs_v1[i].address),
-						get_unaligned_le16(&cmvs_v1[i].offset),
-						get_unaligned_le32(&cmvs_v1[i].data));
+			ret = uea_write_cmv_e1(sc,
+				get_unaligned_le32(&cmvs_v1[i].address),
+				get_unaligned_le16(&cmvs_v1[i].offset),
+				get_unaligned_le32(&cmvs_v1[i].data));
 			if (ret < 0)
 				goto out;
 		}
@@ -1707,9 +1726,10 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 		struct uea_cmvs_v2 *cmvs_v2 = cmvs_ptr;
 
 		for (i = 0; i < len; i++) {
-			ret = uea_write_cmv_e1(sc, get_unaligned_le32(&cmvs_v2[i].address),
-						(u16) get_unaligned_le32(&cmvs_v2[i].offset),
-						get_unaligned_le32(&cmvs_v2[i].data));
+			ret = uea_write_cmv_e1(sc,
+				get_unaligned_le32(&cmvs_v2[i].address),
+				(u16) get_unaligned_le32(&cmvs_v2[i].offset),
+				get_unaligned_le32(&cmvs_v2[i].data));
 			if (ret < 0)
 				goto out;
 		}
@@ -1722,7 +1742,8 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
 	/* Enter in R-ACT-REQ */
 	ret = uea_write_cmv_e1(sc, E1_SA_CNTL, 0, 2);
 	uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
-	uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+	uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
+						"synchronization...\n");
 out:
 	release_firmware(cmvs_fw);
 	return ret;
@@ -1733,7 +1754,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 	int i, ret, len;
 	void *cmvs_ptr;
 	const struct firmware *cmvs_fw;
-	int ver = 2; // we can only handle v2 cmv firmware version;
+	int ver = 2; /* we can only handle v2 cmv firmware version; */
 
 	/* Enter in R-IDLE (cmv) until instructed otherwise */
 	ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 1);
@@ -1750,7 +1771,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 
 
 	/* get options */
- 	ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
+	ret = len = request_cmvs(sc, &cmvs_ptr, &cmvs_fw, &ver);
 	if (ret < 0)
 		return ret;
 
@@ -1760,10 +1781,10 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 
 		for (i = 0; i < len; i++) {
 			ret = uea_write_cmv_e4(sc, 1,
-						get_unaligned_le32(&cmvs_v2[i].group),
-						get_unaligned_le32(&cmvs_v2[i].address),
-						get_unaligned_le32(&cmvs_v2[i].offset),
-						get_unaligned_le32(&cmvs_v2[i].data));
+				get_unaligned_le32(&cmvs_v2[i].group),
+				get_unaligned_le32(&cmvs_v2[i].address),
+				get_unaligned_le32(&cmvs_v2[i].offset),
+				get_unaligned_le32(&cmvs_v2[i].data));
 			if (ret < 0)
 				goto out;
 		}
@@ -1776,7 +1797,8 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
 	/* Enter in R-ACT-REQ */
 	ret = uea_write_cmv_e4(sc, 1, E4_SA_CNTL, 0, 0, 2);
 	uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
-	uea_info(INS_TO_USBDEV(sc), "modem started, waiting synchronization...\n");
+	uea_info(INS_TO_USBDEV(sc), "modem started, waiting "
+						"synchronization...\n");
 out:
 	release_firmware(cmvs_fw);
 	return ret;
@@ -1812,7 +1834,7 @@ static int uea_start_reset(struct uea_softc *sc)
 	uea_request(sc, UEA_SET_MODE, UEA_LOOPBACK_ON, 0, NULL);
 	uea_request(sc, UEA_SET_MODE, UEA_BOOT_IDMA, 0, NULL);
 
- 	/* enter reset mode */
+	/* enter reset mode */
 	uea_request(sc, UEA_SET_MODE, UEA_START_RESET, 0, NULL);
 
 	/* original driver use 200ms, but windows driver use 100ms */
@@ -1824,7 +1846,7 @@ static int uea_start_reset(struct uea_softc *sc)
 	uea_request(sc, UEA_SET_MODE, UEA_END_RESET, 0, NULL);
 
 	if (UEA_CHIP_VERSION(sc) != EAGLE_IV) {
- 		/* clear tx and rx mailboxes */
+		/* clear tx and rx mailboxes */
 		uea_request(sc, UEA_SET_2183_DATA, UEA_MPTX_MAILBOX, 2, &zero);
 		uea_request(sc, UEA_SET_2183_DATA, UEA_MPRX_MAILBOX, 2, &zero);
 		uea_request(sc, UEA_SET_2183_DATA, UEA_SWAP_MAILBOX, 2, &zero);
@@ -1835,9 +1857,11 @@ static int uea_start_reset(struct uea_softc *sc)
 		return ret;
 
 	if (UEA_CHIP_VERSION(sc) == EAGLE_IV)
-		sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1);
+		sc->cmv_dsc.e4.function = E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
+							E4_MODEMREADY, 1);
 	else
-		sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY);
+		sc->cmv_dsc.e1.function = E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
+							E1_MODEMREADY);
 
 	/* demask interrupt */
 	sc->booting = 0;
@@ -1937,7 +1961,8 @@ static int load_XILINX_firmware(struct uea_softc *sc)
 	value = 0;
 	ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
 	if (ret < 0)
-		uea_err(sc->usb_dev, "elsa de-assert failed with error %d\n", ret);
+		uea_err(sc->usb_dev, "elsa de-assert failed with error"
+								" %d\n", ret);
 
 err1:
 	release_firmware(fw_entry);
@@ -1966,13 +1991,15 @@ static void uea_dispatch_cmv_e1(struct uea_softc *sc, struct intr_pkt *intr)
 		if (UEA_CHIP_VERSION(sc) == ADI930
 				&& cmv->bFunction ==  E1_MAKEFUNCTION(2, 2)) {
 			cmv->wIndex = cpu_to_le16(dsc->idx);
-			put_unaligned_le32(dsc->address, &cmv->dwSymbolicAddress);
+			put_unaligned_le32(dsc->address,
+						&cmv->dwSymbolicAddress);
 			cmv->wOffsetAddress = cpu_to_le16(dsc->offset);
 		} else
 			goto bad2;
 	}
 
-	if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE, E1_MODEMREADY)) {
+	if (cmv->bFunction == E1_MAKEFUNCTION(E1_ADSLDIRECTIVE,
+							E1_MODEMREADY)) {
 		wake_up_cmv_ack(sc);
 		uea_leaves(INS_TO_USBDEV(sc));
 		return;
@@ -2021,7 +2048,8 @@ static void uea_dispatch_cmv_e4(struct uea_softc *sc, struct intr_pkt *intr)
 	if (be16_to_cpu(cmv->wFunction) != dsc->function)
 		goto bad2;
 
-	if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE, E4_MODEMREADY, 1)) {
+	if (be16_to_cpu(cmv->wFunction) == E4_MAKEFUNCTION(E4_ADSLDIRECTIVE,
+						E4_MODEMREADY, 1)) {
 		wake_up_cmv_ack(sc);
 		uea_leaves(INS_TO_USBDEV(sc));
 		return;
@@ -2048,14 +2076,16 @@ bad2:
 	return;
 }
 
-static void uea_schedule_load_page_e1(struct uea_softc *sc, struct intr_pkt *intr)
+static void uea_schedule_load_page_e1(struct uea_softc *sc,
+						struct intr_pkt *intr)
 {
 	sc->pageno = intr->e1_bSwapPageNo;
 	sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4;
 	queue_work(sc->work_q, &sc->task);
 }
 
-static void uea_schedule_load_page_e4(struct uea_softc *sc, struct intr_pkt *intr)
+static void uea_schedule_load_page_e4(struct uea_softc *sc,
+						struct intr_pkt *intr)
 {
 	sc->pageno = intr->e4_bSwapPageNo;
 	queue_work(sc->work_q, &sc->task);
@@ -2263,8 +2293,8 @@ out:
 
 static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
 
-static ssize_t read_human_status(struct device *dev, struct device_attribute *attr,
-		char *buf)
+static ssize_t read_human_status(struct device *dev,
+			struct device_attribute *attr, char *buf)
 {
 	int ret = -ENODEV;
 	int modem_state;
@@ -2289,7 +2319,7 @@ static ssize_t read_human_status(struct device *dev, struct device_attribute *at
 		case 0xa:
 			modem_state = 1;
 			break;
-		case 0x7: 	/* operational */
+		case 0x7:	/* operational */
 			modem_state = 2;
 			break;
 		case 0x2:	/* fail ... */
@@ -2324,7 +2354,8 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
+				read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2358,25 +2389,25 @@ out:
 
 static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
 
-#define UEA_ATTR(name, reset) 					\
+#define UEA_ATTR(name, reset)					\
 								\
-static ssize_t read_##name(struct device *dev, 			\
+static ssize_t read_##name(struct device *dev,			\
 		struct device_attribute *attr, char *buf)	\
-{ 								\
-	int ret = -ENODEV; 					\
-	struct uea_softc *sc; 					\
- 								\
-	mutex_lock(&uea_mutex); 				\
+{								\
+	int ret = -ENODEV;					\
+	struct uea_softc *sc;					\
+								\
+	mutex_lock(&uea_mutex);					\
 	sc = dev_to_uea(dev);					\
-	if (!sc) 						\
-		goto out; 					\
+	if (!sc)						\
+		goto out;					\
 	ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.name);	\
 	if (reset)						\
 		sc->stats.phy.name = 0;				\
-out: 								\
-	mutex_unlock(&uea_mutex); 				\
-	return ret; 						\
-} 								\
+out:								\
+	mutex_unlock(&uea_mutex);				\
+	return ret;						\
+}								\
 								\
 static DEVICE_ATTR(stat_##name, S_IRUGO, read_##name, NULL)
 
@@ -2527,12 +2558,14 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 	else if (sc->driver_info & AUTO_ANNEX_B)
 		sc->annex = ANNEXB;
 	else
-		sc->annex = (le16_to_cpu(sc->usb_dev->descriptor.bcdDevice) & 0x80)?ANNEXB:ANNEXA;
+		sc->annex = (le16_to_cpu
+		(sc->usb_dev->descriptor.bcdDevice) & 0x80) ? ANNEXB : ANNEXA;
 
 	alt = altsetting[sc->modem_index];
 	/* ADI930 don't support iso */
 	if (UEA_CHIP_VERSION(id) != ADI930 && alt > 0) {
-		if (alt <= 8 && usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
+		if (alt <= 8 &&
+			usb_set_interface(usb, UEA_DS_IFACE_NO, alt) == 0) {
 			uea_dbg(usb, "set alternate %u for 2 interface\n", alt);
 			uea_info(usb, "using iso mode\n");
 			usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
@@ -2621,40 +2654,74 @@ static void uea_disconnect(struct usb_interface *intf)
  * List of supported VID/PID
  */
 static const struct usb_device_id uea_ids[] = {
-	{USB_DEVICE(ANALOG_VID,	ADI930_PID_PREFIRM),	.driver_info = ADI930 | PREFIRM},
-	{USB_DEVICE(ANALOG_VID,	ADI930_PID_PSTFIRM),	.driver_info = ADI930 | PSTFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_I_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_I_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_II_PID_PREFIRM),	.driver_info = EAGLE_II | PREFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_II_PID_PSTFIRM),	.driver_info = EAGLE_II | PSTFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_IIC_PID_PREFIRM),	.driver_info = EAGLE_II | PREFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_IIC_PID_PSTFIRM),	.driver_info = EAGLE_II | PSTFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_III_PID_PREFIRM),	.driver_info = EAGLE_III | PREFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_III_PID_PSTFIRM),	.driver_info = EAGLE_III | PSTFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_IV_PID_PREFIRM),	.driver_info = EAGLE_IV | PREFIRM},
-	{USB_DEVICE(ANALOG_VID,	EAGLE_IV_PID_PSTFIRM),	.driver_info = EAGLE_IV | PSTFIRM},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_A_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_A_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_B_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_B_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_A_PID_PREFIRM),	.driver_info = EAGLE_II | PREFIRM},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_A_PID_PSTFIRM),	.driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_B_PID_PREFIRM),	.driver_info = EAGLE_II | PREFIRM},
-	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_B_PID_PSTFIRM),	.driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
-	{USB_DEVICE(ELSA_VID,	ELSA_PID_PREFIRM),	.driver_info = ADI930 | PREFIRM},
-	{USB_DEVICE(ELSA_VID,	ELSA_PID_PSTFIRM),	.driver_info = ADI930 | PSTFIRM},
-	{USB_DEVICE(ELSA_VID,	ELSA_PID_A_PREFIRM),	.driver_info = ADI930 | PREFIRM},
-	{USB_DEVICE(ELSA_VID,	ELSA_PID_A_PSTFIRM),	.driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
-	{USB_DEVICE(ELSA_VID,	ELSA_PID_B_PREFIRM),	.driver_info = ADI930 | PREFIRM},
-	{USB_DEVICE(ELSA_VID,	ELSA_PID_B_PSTFIRM),	.driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
-	{USB_DEVICE(USR_VID,	MILLER_A_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(USR_VID,	MILLER_A_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
-	{USB_DEVICE(USR_VID,	MILLER_B_PID_PREFIRM),	.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(USR_VID,	MILLER_B_PID_PSTFIRM),	.driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
-	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
-	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PREFIRM),.driver_info = EAGLE_I | PREFIRM},
-	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PSTFIRM),.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(ANALOG_VID,	ADI930_PID_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	ADI930_PID_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_I_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_I_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_II_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_II_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IIC_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IIC_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_III_PID_PREFIRM),
+		.driver_info = EAGLE_III | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_III_PID_PSTFIRM),
+		.driver_info = EAGLE_III | PSTFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IV_PID_PREFIRM),
+		.driver_info = EAGLE_IV | PREFIRM},
+	{USB_DEVICE(ANALOG_VID,	EAGLE_IV_PID_PSTFIRM),
+		.driver_info = EAGLE_IV | PSTFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_A_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_A_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_B_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_I_B_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_A_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_A_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_B_PID_PREFIRM),
+		.driver_info = EAGLE_II | PREFIRM},
+	{USB_DEVICE(DEVOLO_VID,	DEVOLO_EAGLE_II_B_PID_PSTFIRM),
+		.driver_info = EAGLE_II | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_A_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_A_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_B_PREFIRM),
+		.driver_info = ADI930 | PREFIRM},
+	{USB_DEVICE(ELSA_VID,	ELSA_PID_B_PSTFIRM),
+		.driver_info = ADI930 | PSTFIRM | AUTO_ANNEX_B},
+	{USB_DEVICE(USR_VID,	MILLER_A_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_A_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_A},
+	{USB_DEVICE(USR_VID,	MILLER_B_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	MILLER_B_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM  | AUTO_ANNEX_B},
+	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_A_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_A},
+	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PREFIRM),
+		.driver_info = EAGLE_I | PREFIRM},
+	{USB_DEVICE(USR_VID,	HEINEKEN_B_PID_PSTFIRM),
+		.driver_info = EAGLE_I | PSTFIRM | AUTO_ANNEX_B},
 	{}
 };
 
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index e8c6d94b251..74e44621e31 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "c67x00.h"
 
 /*
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 5e1a253b08a..0c2f14ff969 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -892,7 +892,7 @@ static void acm_write_buffers_free(struct acm *acm)
 	struct usb_device *usb_dev = interface_to_usbdev(acm->control);
 
 	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++)
-		usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah);
+		usb_free_coherent(usb_dev, acm->writesize, wb->buf, wb->dmah);
 }
 
 static void acm_read_buffers_free(struct acm *acm)
@@ -901,8 +901,8 @@ static void acm_read_buffers_free(struct acm *acm)
 	int i, n = acm->rx_buflimit;
 
 	for (i = 0; i < n; i++)
-		usb_buffer_free(usb_dev, acm->readsize,
-					acm->rb[i].base, acm->rb[i].dma);
+		usb_free_coherent(usb_dev, acm->readsize,
+				  acm->rb[i].base, acm->rb[i].dma);
 }
 
 /* Little helper: write buffers allocate */
@@ -912,13 +912,13 @@ static int acm_write_buffers_alloc(struct acm *acm)
 	struct acm_wb *wb;
 
 	for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) {
-		wb->buf = usb_buffer_alloc(acm->dev, acm->writesize, GFP_KERNEL,
+		wb->buf = usb_alloc_coherent(acm->dev, acm->writesize, GFP_KERNEL,
 		    &wb->dmah);
 		if (!wb->buf) {
 			while (i != 0) {
 				--i;
 				--wb;
-				usb_buffer_free(acm->dev, acm->writesize,
+				usb_free_coherent(acm->dev, acm->writesize,
 				    wb->buf, wb->dmah);
 			}
 			return -ENOMEM;
@@ -1177,7 +1177,7 @@ made_compressed_probe:
 	tty_port_init(&acm->port);
 	acm->port.ops = &acm_port_ops;
 
-	buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
+	buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
 	if (!buf) {
 		dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
 		goto alloc_fail2;
@@ -1210,11 +1210,11 @@ made_compressed_probe:
 	for (i = 0; i < num_rx_buf; i++) {
 		struct acm_rb *rb = &(acm->rb[i]);
 
-		rb->base = usb_buffer_alloc(acm->dev, readsize,
+		rb->base = usb_alloc_coherent(acm->dev, readsize,
 				GFP_KERNEL, &rb->dma);
 		if (!rb->base) {
 			dev_dbg(&intf->dev,
-				"out of memory (read bufs usb_buffer_alloc)\n");
+				"out of memory (read bufs usb_alloc_coherent)\n");
 			goto alloc_fail7;
 		}
 	}
@@ -1306,7 +1306,7 @@ alloc_fail7:
 alloc_fail5:
 	acm_write_buffers_free(acm);
 alloc_fail4:
-	usb_buffer_free(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
+	usb_free_coherent(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma);
 alloc_fail2:
 	kfree(acm);
 alloc_fail:
@@ -1356,8 +1356,8 @@ static void acm_disconnect(struct usb_interface *intf)
 	stop_data_traffic(acm);
 
 	acm_write_buffers_free(acm);
-	usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
-								acm->ctrl_dma);
+	usb_free_coherent(usb_dev, acm->ctrlsize, acm->ctrl_buffer,
+			  acm->ctrl_dma);
 	acm_read_buffers_free(acm);
 
 	if (!acm->combined_interfaces)
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 4a8e87ec6ce..5eeb570b9a6 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -124,8 +124,8 @@ struct acm {
 	unsigned char clocal;				/* termios CLOCAL */
 	unsigned int ctrl_caps;				/* control capabilities from the class specific header */
 	unsigned int susp_count;			/* number of suspended interfaces */
-	int combined_interfaces:1;			/* control and data collapsed */
-	int is_int_ep:1;				/* interrupt endpoints contrary to spec used */
+	unsigned int combined_interfaces:1;		/* control and data collapsed */
+	unsigned int is_int_ep:1;			/* interrupt endpoints contrary to spec used */
 	u8 bInterval;
 	struct acm_wb *delayed_wb;			/* write queued for a device about to be woken */
 };
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 189141ca4e0..094c76b5de1 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -276,14 +276,14 @@ static void free_urbs(struct wdm_device *desc)
 
 static void cleanup(struct wdm_device *desc)
 {
-	usb_buffer_free(interface_to_usbdev(desc->intf),
-			desc->wMaxPacketSize,
-			desc->sbuf,
-			desc->validity->transfer_dma);
-	usb_buffer_free(interface_to_usbdev(desc->intf),
-			desc->wMaxCommand,
-			desc->inbuf,
-			desc->response->transfer_dma);
+	usb_free_coherent(interface_to_usbdev(desc->intf),
+			  desc->wMaxPacketSize,
+			  desc->sbuf,
+			  desc->validity->transfer_dma);
+	usb_free_coherent(interface_to_usbdev(desc->intf),
+			  desc->wMaxCommand,
+			  desc->inbuf,
+			  desc->response->transfer_dma);
 	kfree(desc->orq);
 	kfree(desc->irq);
 	kfree(desc->ubuf);
@@ -705,17 +705,17 @@ next_desc:
 	if (!desc->ubuf)
 		goto err;
 
-	desc->sbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+	desc->sbuf = usb_alloc_coherent(interface_to_usbdev(intf),
 					desc->wMaxPacketSize,
 					GFP_KERNEL,
 					&desc->validity->transfer_dma);
 	if (!desc->sbuf)
 		goto err;
 
-	desc->inbuf = usb_buffer_alloc(interface_to_usbdev(intf),
-					desc->bMaxPacketSize0,
-					GFP_KERNEL,
-					&desc->response->transfer_dma);
+	desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf),
+					 desc->bMaxPacketSize0,
+					 GFP_KERNEL,
+					 &desc->response->transfer_dma);
 	if (!desc->inbuf)
 		goto err2;
 
@@ -742,15 +742,15 @@ out:
 	return rv;
 err3:
 	usb_set_intfdata(intf, NULL);
-	usb_buffer_free(interface_to_usbdev(desc->intf),
-			desc->bMaxPacketSize0,
+	usb_free_coherent(interface_to_usbdev(desc->intf),
+			  desc->bMaxPacketSize0,
 			desc->inbuf,
 			desc->response->transfer_dma);
 err2:
-	usb_buffer_free(interface_to_usbdev(desc->intf),
-			desc->wMaxPacketSize,
-			desc->sbuf,
-			desc->validity->transfer_dma);
+	usb_free_coherent(interface_to_usbdev(desc->intf),
+			  desc->wMaxPacketSize,
+			  desc->sbuf,
+			  desc->validity->transfer_dma);
 err:
 	free_urbs(desc);
 	kfree(desc->ubuf);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 93b5f85d7ce..2250095db0a 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -27,7 +27,7 @@
  *	v0.11 - add proto_bias option (Pete Zaitcev)
  *	v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
  *	v0.13 - alloc space for statusbuf (<status> not on stack);
- *		use usb_buffer_alloc() for read buf & write buf;
+ *		use usb_alloc_coherent() for read buf & write buf;
  *      none  - Maintained in Linux kernel after v0.13
  */
 
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index 3ba2fff7149..2c6965484fe 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -14,7 +14,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/usb.h>
-#include "hcd.h"
+#include <linux/usb/hcd.h>
 
 
 /*
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 0d3af6a6ee4..83126b03e7c 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -1,12 +1,14 @@
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/quirks.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <asm/byteorder.h>
 #include "usb.h"
-#include "hcd.h"
+
 
 #define USB_MAXALTSETTING		128	/* Hard limit */
 #define USB_MAXENDPOINTS		30	/* Hard limit */
@@ -19,32 +21,6 @@ static inline const char *plural(int n)
 	return (n == 1 ? "" : "s");
 }
 
-/* FIXME: this is a kludge */
-static int find_next_descriptor_more(unsigned char *buffer, int size,
-    int dt1, int dt2, int dt3, int *num_skipped)
-{
-	struct usb_descriptor_header *h;
-	int n = 0;
-	unsigned char *buffer0 = buffer;
-
-	/* Find the next descriptor of type dt1 or dt2 or dt3 */
-	while (size > 0) {
-		h = (struct usb_descriptor_header *) buffer;
-		if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2 ||
-				h->bDescriptorType == dt3)
-			break;
-		buffer += h->bLength;
-		size -= h->bLength;
-		++n;
-	}
-
-	/* Store the number of descriptors skipped and return the
-	 * number of bytes skipped */
-	if (num_skipped)
-		*num_skipped = n;
-	return buffer - buffer0;
-}
-
 static int find_next_descriptor(unsigned char *buffer, int size,
     int dt1, int dt2, int *num_skipped)
 {
@@ -69,47 +45,41 @@ static int find_next_descriptor(unsigned char *buffer, int size,
 	return buffer - buffer0;
 }
 
-static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
+static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 		int inum, int asnum, struct usb_host_endpoint *ep,
-		int num_ep, unsigned char *buffer, int size)
+		unsigned char *buffer, int size)
 {
-	unsigned char *buffer_start = buffer;
-	struct usb_ss_ep_comp_descriptor	*desc;
-	int retval;
-	int num_skipped;
+	struct usb_ss_ep_comp_descriptor *desc;
 	int max_tx;
-	int i;
 
+	/* The SuperSpeed endpoint companion descriptor is supposed to
+	 * be the first thing immediately following the endpoint descriptor.
+	 */
 	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
-	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
+	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP ||
+			size < USB_DT_SS_EP_COMP_SIZE) {
 		dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
 				" interface %d altsetting %d ep %d: "
 				"using minimum values\n",
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		/*
-		 * The next descriptor is for an Endpoint or Interface,
-		 * no extra descriptors to copy into the companion structure,
-		 * and we didn't eat up any of the buffer.
+
+		/* Fill in some default values.
+		 * Leave bmAttributes as zero, which will mean no streams for
+		 * bulk, and isoc won't support multiple bursts of packets.
+		 * With bursts of only one packet, and a Mult of 1, the max
+		 * amount of data moved per endpoint service interval is one
+		 * packet.
 		 */
-		return 0;
+		ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE;
+		ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+		if (usb_endpoint_xfer_isoc(&ep->desc) ||
+				usb_endpoint_xfer_int(&ep->desc))
+			ep->ss_ep_comp.wBytesPerInterval =
+					ep->desc.wMaxPacketSize;
+		return;
 	}
-	memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
-	desc = &ep->ss_ep_comp->desc;
-	buffer += desc->bLength;
-	size -= desc->bLength;
 
-	/* Eat up the other descriptors we don't care about */
-	ep->ss_ep_comp->extra = buffer;
-	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
-			USB_DT_INTERFACE, &num_skipped);
-	ep->ss_ep_comp->extralen = i;
-	buffer += i;
-	size -= i;
-	retval = buffer - buffer_start;
-	if (num_skipped > 0)
-		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
-				num_skipped, plural(num_skipped),
-				"SuperSpeed endpoint companion");
+	memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE);
 
 	/* Check the various values */
 	if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
@@ -117,47 +87,48 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to zero\n", desc->bMaxBurst,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		desc->bMaxBurst = 0;
-	}
-	if (desc->bMaxBurst > 15) {
+		ep->ss_ep_comp.bMaxBurst = 0;
+	} else if (desc->bMaxBurst > 15) {
 		dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to 15\n", desc->bMaxBurst,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		desc->bMaxBurst = 15;
+		ep->ss_ep_comp.bMaxBurst = 15;
 	}
-	if ((usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_int(&ep->desc))
-			&& desc->bmAttributes != 0) {
+
+	if ((usb_endpoint_xfer_control(&ep->desc) ||
+			usb_endpoint_xfer_int(&ep->desc)) &&
+				desc->bmAttributes != 0) {
 		dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to zero\n",
 				usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
 				desc->bmAttributes,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		desc->bmAttributes = 0;
-	}
-	if (usb_endpoint_xfer_bulk(&ep->desc) && desc->bmAttributes > 16) {
+		ep->ss_ep_comp.bmAttributes = 0;
+	} else if (usb_endpoint_xfer_bulk(&ep->desc) &&
+			desc->bmAttributes > 16) {
 		dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to max\n",
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		desc->bmAttributes = 16;
-	}
-	if (usb_endpoint_xfer_isoc(&ep->desc) && desc->bmAttributes > 2) {
+		ep->ss_ep_comp.bmAttributes = 16;
+	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
+			desc->bmAttributes > 2) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to 3\n", desc->bmAttributes + 1,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		desc->bmAttributes = 2;
+		ep->ss_ep_comp.bmAttributes = 2;
 	}
-	if (usb_endpoint_xfer_isoc(&ep->desc)) {
+
+	if (usb_endpoint_xfer_isoc(&ep->desc))
 		max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1) *
 			(desc->bmAttributes + 1);
-	} else if (usb_endpoint_xfer_int(&ep->desc)) {
+	else if (usb_endpoint_xfer_int(&ep->desc))
 		max_tx = ep->desc.wMaxPacketSize * (desc->bMaxBurst + 1);
-	} else {
-		goto valid;
-	}
+	else
+		max_tx = 999999;
 	if (desc->wBytesPerInterval > max_tx) {
 		dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
 				"config %d interface %d altsetting %d ep %d: "
@@ -166,10 +137,8 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 				desc->wBytesPerInterval,
 				cfgno, inum, asnum, ep->desc.bEndpointAddress,
 				max_tx);
-		desc->wBytesPerInterval = max_tx;
+		ep->ss_ep_comp.wBytesPerInterval = max_tx;
 	}
-valid:
-	return retval;
 }
 
 static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
@@ -291,61 +260,19 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 				cfgno, inum, asnum, d->bEndpointAddress,
 				maxp);
 	}
-	/* Allocate room for and parse any SS endpoint companion descriptors */
-	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) {
-		endpoint->extra = buffer;
-		i = find_next_descriptor_more(buffer, size, USB_DT_SS_ENDPOINT_COMP,
-				USB_DT_ENDPOINT, USB_DT_INTERFACE, &n);
-		endpoint->extralen = i;
-		buffer += i;
-		size -= i;
-
-		/* Allocate space for the SS endpoint companion descriptor */
-		endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
-				GFP_KERNEL);
-		if (!endpoint->ss_ep_comp)
-			return -ENOMEM;
 
-		/* Fill in some default values (may be overwritten later) */
-		endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
-		endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
-		endpoint->ss_ep_comp->desc.bMaxBurst = 0;
-		/*
-		 * Leave bmAttributes as zero, which will mean no streams for
-		 * bulk, and isoc won't support multiple bursts of packets.
-		 * With bursts of only one packet, and a Mult of 1, the max
-		 * amount of data moved per endpoint service interval is one
-		 * packet.
-		 */
-		if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
-				usb_endpoint_xfer_int(&endpoint->desc))
-			endpoint->ss_ep_comp->desc.wBytesPerInterval =
-				endpoint->desc.wMaxPacketSize;
-
-		if (size > 0) {
-			retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
-					inum, asnum, endpoint, num_ep, buffer,
-					size);
-			if (retval >= 0) {
-				buffer += retval;
-				retval = buffer - buffer0;
-			}
-		} else {
-			dev_warn(ddev, "config %d interface %d altsetting %d "
-				"endpoint 0x%X has no "
-				"SuperSpeed companion descriptor\n",
-				cfgno, inum, asnum, d->bEndpointAddress);
-			retval = buffer - buffer0;
-		}
-	} else {
-		/* Skip over any Class Specific or Vendor Specific descriptors;
-		 * find the next endpoint or interface descriptor */
-		endpoint->extra = buffer;
-		i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
-				USB_DT_INTERFACE, &n);
-		endpoint->extralen = i;
-		retval = buffer - buffer0 + i;
-	}
+	/* Parse a possible SuperSpeed endpoint companion descriptor */
+	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER)
+		usb_parse_ss_endpoint_companion(ddev, cfgno,
+				inum, asnum, endpoint, buffer, size);
+
+	/* Skip over any Class Specific or Vendor Specific descriptors;
+	 * find the next endpoint or interface descriptor */
+	endpoint->extra = buffer;
+	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
+			USB_DT_INTERFACE, &n);
+	endpoint->extralen = i;
+	retval = buffer - buffer0 + i;
 	if (n > 0)
 		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
 		    n, plural(n), "endpoint");
@@ -478,9 +405,10 @@ skip_to_next_interface_descriptor:
 	return buffer - buffer0 + i;
 }
 
-static int usb_parse_configuration(struct device *ddev, int cfgidx,
+static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
     struct usb_host_config *config, unsigned char *buffer, int size)
 {
+	struct device *ddev = &dev->dev;
 	unsigned char *buffer0 = buffer;
 	int cfgno;
 	int nintf, nintf_orig;
@@ -549,6 +477,16 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx,
 			}
 
 			inum = d->bInterfaceNumber;
+
+			if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) &&
+			    n >= nintf_orig) {
+				dev_warn(ddev, "config %d has more interface "
+				    "descriptors, than it declares in "
+				    "bNumInterfaces, ignoring interface "
+				    "number: %d\n", cfgno, inum);
+				continue;
+			}
+
 			if (inum >= nintf_orig)
 				dev_warn(ddev, "config %d has an invalid "
 				    "interface number: %d but max is %d\n",
@@ -722,7 +660,6 @@ int usb_get_configuration(struct usb_device *dev)
 	int ncfg = dev->descriptor.bNumConfigurations;
 	int result = 0;
 	unsigned int cfgno, length;
-	unsigned char *buffer;
 	unsigned char *bigbuffer;
 	struct usb_config_descriptor *desc;
 
@@ -751,17 +688,16 @@ int usb_get_configuration(struct usb_device *dev)
 	if (!dev->rawdescriptors)
 		goto err2;
 
-	buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
-	if (!buffer)
+	desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
+	if (!desc)
 		goto err2;
-	desc = (struct usb_config_descriptor *)buffer;
 
 	result = 0;
 	for (; cfgno < ncfg; cfgno++) {
 		/* We grab just the first descriptor so we know how long
 		 * the whole configuration is */
 		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
-		    buffer, USB_DT_CONFIG_SIZE);
+		    desc, USB_DT_CONFIG_SIZE);
 		if (result < 0) {
 			dev_err(ddev, "unable to read config index %d "
 			    "descriptor/%s: %d\n", cfgno, "start", result);
@@ -800,7 +736,7 @@ int usb_get_configuration(struct usb_device *dev)
 
 		dev->rawdescriptors[cfgno] = bigbuffer;
 
-		result = usb_parse_configuration(&dev->dev, cfgno,
+		result = usb_parse_configuration(dev, cfgno,
 		    &dev->config[cfgno], bigbuffer, length);
 		if (result < 0) {
 			++cfgno;
@@ -810,7 +746,7 @@ int usb_get_configuration(struct usb_device *dev)
 	result = 0;
 
 err:
-	kfree(buffer);
+	kfree(desc);
 out_not_authorized:
 	dev->descriptor.bNumConfigurations = cfgno;
 err2:
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 19bc03a9fec..3449742c00e 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -1,7 +1,8 @@
 /*
  * devices.c
  * (C) Copyright 1999 Randy Dunlap.
- * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. (proc file per device)
+ * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>.
+ *     (proc file per device)
  * (C) Copyright 1999 Deti Fliegl (new USB architecture)
  *
  * This program is free software; you can redistribute it and/or modify
@@ -55,11 +56,11 @@
 #include <linux/usb.h>
 #include <linux/smp_lock.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
 #include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #include "usb.h"
-#include "hcd.h"
 
 /* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
 #define ALLOW_SERIAL_NUMBER
@@ -138,8 +139,8 @@ struct class_info {
 	char *class_name;
 };
 
-static const struct class_info clas_info[] =
-{					/* max. 5 chars. per name string */
+static const struct class_info clas_info[] = {
+	/* max. 5 chars. per name string */
 	{USB_CLASS_PER_INTERFACE,	">ifc"},
 	{USB_CLASS_AUDIO,		"audio"},
 	{USB_CLASS_COMM,		"comm."},
@@ -191,8 +192,10 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 
 	if (speed == USB_SPEED_HIGH) {
 		switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) {
-		case 1 << 11:	bandwidth = 2; break;
-		case 2 << 11:	bandwidth = 3; break;
+		case 1 << 11:
+			bandwidth = 2; break;
+		case 2 << 11:
+			bandwidth = 3; break;
 		}
 	}
 
@@ -200,7 +203,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		type = "Ctrl";
-		if (speed == USB_SPEED_HIGH) 	/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH)	/* uframes per NAK */
 			interval = desc->bInterval;
 		else
 			interval = 0;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 3466fdc5bb1..c2f62a3993d 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -43,6 +43,7 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
 #include <linux/cdev.h>
 #include <linux/notifier.h>
 #include <linux/security.h>
@@ -50,9 +51,7 @@
 #include <asm/byteorder.h>
 #include <linux/moduleparam.h>
 
-#include "hcd.h"	/* for usbcore internals */
 #include "usb.h"
-#include "hub.h"
 
 #define USB_MAXBUS			64
 #define USB_DEVICE_MAX			USB_MAXBUS * 128
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 2f3dc4cdf79..ded550eda5d 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -26,8 +26,9 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>
 #include <linux/pm_runtime.h>
-#include "hcd.h"
+
 #include "usb.h"
 
 
@@ -333,7 +334,8 @@ static int usb_probe_interface(struct device *dev)
 	usb_cancel_queued_reset(intf);
 
 	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
-	pm_runtime_disable(dev);
+	if (driver->supports_autosuspend)
+		pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 
 	usb_autosuspend_device(udev);
@@ -388,7 +390,8 @@ static int usb_unbind_interface(struct device *dev)
 	intf->needs_remote_wakeup = 0;
 
 	/* Unbound interfaces are always runtime-PM-disabled and -suspended */
-	pm_runtime_disable(dev);
+	if (driver->supports_autosuspend)
+		pm_runtime_disable(dev);
 	pm_runtime_set_suspended(dev);
 
 	/* Undo any residual pm_autopm_get_interface_* calls */
@@ -437,14 +440,17 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 
 	iface->condition = USB_INTERFACE_BOUND;
 
-	/* Claimed interfaces are initially inactive (suspended).  They are
-	 * runtime-PM-enabled only if the driver has autosuspend support.
-	 * They are sensitive to their children's power states.
+	/* Claimed interfaces are initially inactive (suspended) and
+	 * runtime-PM-enabled, but only if the driver has autosuspend
+	 * support.  Otherwise they are marked active, to prevent the
+	 * device from being autosuspended, but left disabled.  In either
+	 * case they are sensitive to their children's power states.
 	 */
-	pm_runtime_set_suspended(dev);
 	pm_suspend_ignore_children(dev, false);
 	if (driver->supports_autosuspend)
 		pm_runtime_enable(dev);
+	else
+		pm_runtime_set_active(dev);
 
 	/* if interface was already added, bind now; else let
 	 * the future device_add() bind it, bypassing probe()
@@ -1355,13 +1361,9 @@ int usb_resume(struct device *dev, pm_message_t msg)
  *
  * The caller must hold @udev's device lock.
  */
-int usb_enable_autosuspend(struct usb_device *udev)
+void usb_enable_autosuspend(struct usb_device *udev)
 {
-	if (udev->autosuspend_disabled) {
-		udev->autosuspend_disabled = 0;
-		usb_autosuspend_device(udev);
-	}
-	return 0;
+	pm_runtime_allow(&udev->dev);
 }
 EXPORT_SYMBOL_GPL(usb_enable_autosuspend);
 
@@ -1374,16 +1376,9 @@ EXPORT_SYMBOL_GPL(usb_enable_autosuspend);
  *
  * The caller must hold @udev's device lock.
  */
-int usb_disable_autosuspend(struct usb_device *udev)
+void usb_disable_autosuspend(struct usb_device *udev)
 {
-	int rc = 0;
-
-	if (!udev->autosuspend_disabled) {
-		rc = usb_autoresume_device(udev);
-		if (rc == 0)
-			udev->autosuspend_disabled = 1;
-	}
-	return rc;
+	pm_runtime_forbid(&udev->dev);
 }
 EXPORT_SYMBOL_GPL(usb_disable_autosuspend);
 
@@ -1485,9 +1480,6 @@ int usb_autoresume_device(struct usb_device *udev)
  * 0, a delayed autosuspend request for @intf's device is attempted.  The
  * attempt may fail (see autosuspend_check()).
  *
- * If the driver has set @intf->needs_remote_wakeup then autosuspend will
- * take place only if the device's remote-wakeup facility is enabled.
- *
  * This routine can run only in process context.
  */
 void usb_autopm_put_interface(struct usb_interface *intf)
@@ -1530,7 +1522,7 @@ void usb_autopm_put_interface_async(struct usb_interface *intf)
 	atomic_dec(&intf->pm_usage_cnt);
 	pm_runtime_put_noidle(&intf->dev);
 
-	if (!udev->autosuspend_disabled) {
+	if (udev->dev.power.runtime_auto) {
 		/* Optimization: Don't schedule a delayed autosuspend if
 		 * the timer is already running and the expiration time
 		 * wouldn't change.
@@ -1672,14 +1664,14 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface_no_resume);
 /* Internal routine to check whether we may autosuspend a device. */
 static int autosuspend_check(struct usb_device *udev)
 {
-	int			i;
+	int			w, i;
 	struct usb_interface	*intf;
 	unsigned long		suspend_time, j;
 
 	/* Fail if autosuspend is disabled, or any interfaces are in use, or
 	 * any interface drivers require remote wakeup but it isn't available.
 	 */
-	udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+	w = 0;
 	if (udev->actconfig) {
 		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
@@ -1693,12 +1685,7 @@ static int autosuspend_check(struct usb_device *udev)
 				continue;
 			if (atomic_read(&intf->dev.power.usage_count) > 0)
 				return -EBUSY;
-			if (intf->needs_remote_wakeup &&
-					!udev->do_remote_wakeup) {
-				dev_dbg(&udev->dev, "remote wakeup needed "
-						"for autosuspend\n");
-				return -EOPNOTSUPP;
-			}
+			w |= intf->needs_remote_wakeup;
 
 			/* Don't allow autosuspend if the device will need
 			 * a reset-resume and any of its interface drivers
@@ -1714,6 +1701,11 @@ static int autosuspend_check(struct usb_device *udev)
 			}
 		}
 	}
+	if (w && !device_can_wakeup(&udev->dev)) {
+		dev_dbg(&udev->dev, "remote wakeup needed for autosuspend\n");
+		return -EOPNOTSUPP;
+	}
+	udev->do_remote_wakeup = w;
 
 	/* If everything is okay but the device hasn't been idle for long
 	 * enough, queue a delayed autosuspend request.
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 2c95153c0f2..9a34ccb0a1c 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -18,8 +18,8 @@
  */
 
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include "usb.h"
-#include "hcd.h"
 
 static inline const char *plural(int n)
 {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 15286533c15..1cf2d1e79a5 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -21,6 +21,7 @@
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -33,7 +34,6 @@
 #endif
 
 #include "usb.h"
-#include "hcd.h"
 
 
 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 2f8cedda800..12742f152f4 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -38,14 +38,12 @@
 #include <asm/unaligned.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
-#include <linux/mutex.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
 #include "usb.h"
-#include "hcd.h"
-#include "hub.h"
 
 
 /*-------------------------------------------------------------------------*/
@@ -1261,6 +1259,51 @@ static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
 	*dma_handle = 0;
 }
 
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	enum dma_data_direction dir;
+
+	if (urb->transfer_flags & URB_SETUP_MAP_SINGLE)
+		dma_unmap_single(hcd->self.controller,
+				urb->setup_dma,
+				sizeof(struct usb_ctrlrequest),
+				DMA_TO_DEVICE);
+	else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
+		hcd_free_coherent(urb->dev->bus,
+				&urb->setup_dma,
+				(void **) &urb->setup_packet,
+				sizeof(struct usb_ctrlrequest),
+				DMA_TO_DEVICE);
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+	if (urb->transfer_flags & URB_DMA_MAP_SG)
+		dma_unmap_sg(hcd->self.controller,
+				urb->sg,
+				urb->num_sgs,
+				dir);
+	else if (urb->transfer_flags & URB_DMA_MAP_PAGE)
+		dma_unmap_page(hcd->self.controller,
+				urb->transfer_dma,
+				urb->transfer_buffer_length,
+				dir);
+	else if (urb->transfer_flags & URB_DMA_MAP_SINGLE)
+		dma_unmap_single(hcd->self.controller,
+				urb->transfer_dma,
+				urb->transfer_buffer_length,
+				dir);
+	else if (urb->transfer_flags & URB_MAP_LOCAL)
+		hcd_free_coherent(urb->dev->bus,
+				&urb->transfer_dma,
+				&urb->transfer_buffer,
+				urb->transfer_buffer_length,
+				dir);
+
+	/* Make it safe to call this routine more than once */
+	urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL |
+			URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
+			URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
+}
+
 static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 			   gfp_t mem_flags)
 {
@@ -1272,11 +1315,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	 * unless it uses pio or talks to another transport,
 	 * or uses the provided scatter gather list for bulk.
 	 */
-	if (is_root_hub(urb->dev))
-		return 0;
 
-	if (usb_endpoint_xfer_control(&urb->ep->desc)
-	    && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
 		if (hcd->self.uses_dma) {
 			urb->setup_dma = dma_map_single(
 					hcd->self.controller,
@@ -1286,27 +1326,64 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 			if (dma_mapping_error(hcd->self.controller,
 						urb->setup_dma))
 				return -EAGAIN;
-		} else if (hcd->driver->flags & HCD_LOCAL_MEM)
+			urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
+		} else if (hcd->driver->flags & HCD_LOCAL_MEM) {
 			ret = hcd_alloc_coherent(
 					urb->dev->bus, mem_flags,
 					&urb->setup_dma,
 					(void **)&urb->setup_packet,
 					sizeof(struct usb_ctrlrequest),
 					DMA_TO_DEVICE);
+			if (ret)
+				return ret;
+			urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
+		}
 	}
 
 	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-	if (ret == 0 && urb->transfer_buffer_length != 0
+	if (urb->transfer_buffer_length != 0
 	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
 		if (hcd->self.uses_dma) {
-			urb->transfer_dma = dma_map_single (
-					hcd->self.controller,
-					urb->transfer_buffer,
-					urb->transfer_buffer_length,
-					dir);
-			if (dma_mapping_error(hcd->self.controller,
+			if (urb->num_sgs) {
+				int n = dma_map_sg(
+						hcd->self.controller,
+						urb->sg,
+						urb->num_sgs,
+						dir);
+				if (n <= 0)
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_SG;
+				if (n != urb->num_sgs) {
+					urb->num_sgs = n;
+					urb->transfer_flags |=
+							URB_DMA_SG_COMBINED;
+				}
+			} else if (urb->sg) {
+				struct scatterlist *sg = urb->sg;
+				urb->transfer_dma = dma_map_page(
+						hcd->self.controller,
+						sg_page(sg),
+						sg->offset,
+						urb->transfer_buffer_length,
+						dir);
+				if (dma_mapping_error(hcd->self.controller,
 						urb->transfer_dma))
-				return -EAGAIN;
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_PAGE;
+			} else {
+				urb->transfer_dma = dma_map_single(
+						hcd->self.controller,
+						urb->transfer_buffer,
+						urb->transfer_buffer_length,
+						dir);
+				if (dma_mapping_error(hcd->self.controller,
+						urb->transfer_dma))
+					ret = -EAGAIN;
+				else
+					urb->transfer_flags |= URB_DMA_MAP_SINGLE;
+			}
 		} else if (hcd->driver->flags & HCD_LOCAL_MEM) {
 			ret = hcd_alloc_coherent(
 					urb->dev->bus, mem_flags,
@@ -1314,55 +1391,16 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 					&urb->transfer_buffer,
 					urb->transfer_buffer_length,
 					dir);
-
-			if (ret && usb_endpoint_xfer_control(&urb->ep->desc)
-			    && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
-				hcd_free_coherent(urb->dev->bus,
-					&urb->setup_dma,
-					(void **)&urb->setup_packet,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
+			if (ret == 0)
+				urb->transfer_flags |= URB_MAP_LOCAL;
 		}
+		if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
+				URB_SETUP_MAP_LOCAL)))
+			unmap_urb_for_dma(hcd, urb);
 	}
 	return ret;
 }
 
-static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
-{
-	enum dma_data_direction dir;
-
-	if (is_root_hub(urb->dev))
-		return;
-
-	if (usb_endpoint_xfer_control(&urb->ep->desc)
-	    && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
-		if (hcd->self.uses_dma)
-			dma_unmap_single(hcd->self.controller, urb->setup_dma,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
-		else if (hcd->driver->flags & HCD_LOCAL_MEM)
-			hcd_free_coherent(urb->dev->bus, &urb->setup_dma,
-					(void **)&urb->setup_packet,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
-	}
-
-	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-	if (urb->transfer_buffer_length != 0
-	    && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
-		if (hcd->self.uses_dma)
-			dma_unmap_single(hcd->self.controller,
-					urb->transfer_dma,
-					urb->transfer_buffer_length,
-					dir);
-		else if (hcd->driver->flags & HCD_LOCAL_MEM)
-			hcd_free_coherent(urb->dev->bus, &urb->transfer_dma,
-					&urb->transfer_buffer,
-					urb->transfer_buffer_length,
-					dir);
-	}
-}
-
 /*-------------------------------------------------------------------------*/
 
 /* may be called in any context with a valid urb->dev usecount
@@ -1391,21 +1429,20 @@ int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
 	 * URBs must be submitted in process context with interrupts
 	 * enabled.
 	 */
-	status = map_urb_for_dma(hcd, urb, mem_flags);
-	if (unlikely(status)) {
-		usbmon_urb_submit_error(&hcd->self, urb, status);
-		goto error;
-	}
 
-	if (is_root_hub(urb->dev))
+	if (is_root_hub(urb->dev)) {
 		status = rh_urb_enqueue(hcd, urb);
-	else
-		status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+	} else {
+		status = map_urb_for_dma(hcd, urb, mem_flags);
+		if (likely(status == 0)) {
+			status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+			if (unlikely(status))
+				unmap_urb_for_dma(hcd, urb);
+		}
+	}
 
 	if (unlikely(status)) {
 		usbmon_urb_submit_error(&hcd->self, urb, status);
-		unmap_urb_for_dma(hcd, urb);
- error:
 		urb->hcpriv = NULL;
 		INIT_LIST_HEAD(&urb->urb_list);
 		atomic_dec(&urb->use_count);
@@ -1775,6 +1812,75 @@ void usb_hcd_reset_endpoint(struct usb_device *udev,
 	}
 }
 
+/**
+ * usb_alloc_streams - allocate bulk endpoint stream IDs.
+ * @interface:		alternate setting that includes all endpoints.
+ * @eps:		array of endpoints that need streams.
+ * @num_eps:		number of endpoints in the array.
+ * @num_streams:	number of streams to allocate.
+ * @mem_flags:		flags hcd should use to allocate memory.
+ *
+ * Sets up a group of bulk endpoints to have num_streams stream IDs available.
+ * Drivers may queue multiple transfers to different stream IDs, which may
+ * complete in a different order than they were queued.
+ */
+int usb_alloc_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *dev;
+	int i;
+
+	dev = interface_to_usbdev(interface);
+	hcd = bus_to_hcd(dev->bus);
+	if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
+		return -EINVAL;
+	if (dev->speed != USB_SPEED_SUPER)
+		return -EINVAL;
+
+	/* Streams only apply to bulk endpoints. */
+	for (i = 0; i < num_eps; i++)
+		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+			return -EINVAL;
+
+	return hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
+			num_streams, mem_flags);
+}
+EXPORT_SYMBOL_GPL(usb_alloc_streams);
+
+/**
+ * usb_free_streams - free bulk endpoint stream IDs.
+ * @interface:	alternate setting that includes all endpoints.
+ * @eps:	array of endpoints to remove streams from.
+ * @num_eps:	number of endpoints in the array.
+ * @mem_flags:	flags hcd should use to allocate memory.
+ *
+ * Reverts a group of bulk endpoints back to not using stream IDs.
+ * Can fail if we are given bad arguments, or HCD is broken.
+ */
+void usb_free_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags)
+{
+	struct usb_hcd *hcd;
+	struct usb_device *dev;
+	int i;
+
+	dev = interface_to_usbdev(interface);
+	hcd = bus_to_hcd(dev->bus);
+	if (dev->speed != USB_SPEED_SUPER)
+		return;
+
+	/* Streams only apply to bulk endpoints. */
+	for (i = 0; i < num_eps; i++)
+		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+			return;
+
+	hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
+}
+EXPORT_SYMBOL_GPL(usb_free_streams);
+
 /* Protect against drivers that try to unlink URBs after the device
  * is gone, by waiting until all unlinks for @udev are finished.
  * Since we don't currently track URBs by device, simply wait until
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0940ccd6f4f..83e7bbbe97f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -19,6 +19,7 @@
 #include <linux/ioctl.h>
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
@@ -28,8 +29,6 @@
 #include <asm/byteorder.h>
 
 #include "usb.h"
-#include "hcd.h"
-#include "hub.h"
 
 /* if we are in debug mode, always announce new devices */
 #ifdef DEBUG
@@ -154,11 +153,11 @@ static int usb_reset_and_verify_device(struct usb_device *udev);
 
 static inline char *portspeed(int portstatus)
 {
-	if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
+	if (portstatus & USB_PORT_STAT_HIGH_SPEED)
     		return "480 Mb/s";
-	else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
+	else if (portstatus & USB_PORT_STAT_LOW_SPEED)
 		return "1.5 Mb/s";
-	else if (portstatus & (1 << USB_PORT_FEAT_SUPERSPEED))
+	else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
 		return "5.0 Gb/s";
 	else
 		return "12 Mb/s";
@@ -745,8 +744,20 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				!(portstatus & USB_PORT_STAT_CONNECTION) ||
 				!udev ||
 				udev->state == USB_STATE_NOTATTACHED)) {
-			clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
-			portstatus &= ~USB_PORT_STAT_ENABLE;
+			/*
+			 * USB3 protocol ports will automatically transition
+			 * to Enabled state when detect an USB3.0 device attach.
+			 * Do not disable USB3 protocol ports.
+			 * FIXME: USB3 root hub and external hubs are treated
+			 * differently here.
+			 */
+			if (hdev->descriptor.bDeviceProtocol != 3 ||
+			    (!hdev->parent &&
+			     !(portstatus & USB_PORT_STAT_SUPER_SPEED))) {
+				clear_port_feature(hdev, port1,
+						   USB_PORT_FEAT_ENABLE);
+				portstatus &= ~USB_PORT_STAT_ENABLE;
+			}
 		}
 
 		/* Clear status-change flags; we'll debounce later */
@@ -1784,7 +1795,6 @@ int usb_new_device(struct usb_device *udev)
 		 * sysfs power/wakeup controls wakeup enabled/disabled
 		 */
 		device_init_wakeup(&udev->dev, 0);
-		device_set_wakeup_enable(&udev->dev, 1);
 	}
 
 	/* Tell the runtime-PM framework the device is active */
@@ -3038,7 +3048,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
 		/* maybe switch power back on (e.g. root hub was reset) */
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
+				&& !(portstatus & USB_PORT_STAT_POWER))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
@@ -3076,7 +3086,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		if (!(hcd->driver->flags & HCD_USB3))
 			udev->speed = USB_SPEED_UNKNOWN;
 		else if ((hdev->parent == NULL) &&
-				(portstatus & (1 << USB_PORT_FEAT_SUPERSPEED)))
+				(portstatus & USB_PORT_STAT_SUPER_SPEED))
 			udev->speed = USB_SPEED_SUPER;
 		else
 			udev->speed = USB_SPEED_UNKNOWN;
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 111a01a747f..1a27618b67d 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -40,9 +40,9 @@
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
 #include <linux/smp_lock.h>
+#include <linux/usb/hcd.h>
 #include <asm/byteorder.h>
 #include "usb.h"
-#include "hcd.h"
 
 #define USBFS_DEFAULT_DEVMODE (S_IWUSR | S_IRUGO)
 #define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index cd220277c6c..a73e08fdab3 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -14,9 +14,9 @@
 #include <linux/device.h>
 #include <linux/scatterlist.h>
 #include <linux/usb/quirks.h>
+#include <linux/usb/hcd.h>	/* for usbcore internals */
 #include <asm/byteorder.h>
 
-#include "hcd.h"	/* for usbcore internals */
 #include "usb.h"
 
 static void cancel_async_set_config(struct usb_device *udev);
@@ -226,8 +226,7 @@ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
 	struct urb *urb;
 	struct usb_host_endpoint *ep;
 
-	ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out)
-			[usb_pipeendpoint(pipe)];
+	ep = usb_pipe_endpoint(usb_dev, pipe);
 	if (!ep || len < 0)
 		return -EINVAL;
 
@@ -259,9 +258,6 @@ static void sg_clean(struct usb_sg_request *io)
 		kfree(io->urbs);
 		io->urbs = NULL;
 	}
-	if (io->dev->dev.dma_mask != NULL)
-		usb_buffer_unmap_sg(io->dev, usb_pipein(io->pipe),
-				    io->sg, io->nents);
 	io->dev = NULL;
 }
 
@@ -364,7 +360,6 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 {
 	int i;
 	int urb_flags;
-	int dma;
 	int use_sg;
 
 	if (!io || !dev || !sg
@@ -376,114 +371,76 @@ int usb_sg_init(struct usb_sg_request *io, struct usb_device *dev,
 	spin_lock_init(&io->lock);
 	io->dev = dev;
 	io->pipe = pipe;
-	io->sg = sg;
-	io->nents = nents;
-
-	/* not all host controllers use DMA (like the mainstream pci ones);
-	 * they can use PIO (sl811) or be software over another transport.
-	 */
-	dma = (dev->dev.dma_mask != NULL);
-	if (dma)
-		io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
-						sg, nents);
-	else
-		io->entries = nents;
-
-	/* initialize all the urbs we'll use */
-	if (io->entries <= 0)
-		return io->entries;
 
 	if (dev->bus->sg_tablesize > 0) {
-		io->urbs = kmalloc(sizeof *io->urbs, mem_flags);
 		use_sg = true;
+		io->entries = 1;
 	} else {
-		io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
 		use_sg = false;
+		io->entries = nents;
 	}
+
+	/* initialize all the urbs we'll use */
+	io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
 	if (!io->urbs)
 		goto nomem;
 
-	urb_flags = 0;
-	if (dma)
-		urb_flags |= URB_NO_TRANSFER_DMA_MAP;
+	urb_flags = URB_NO_INTERRUPT;
 	if (usb_pipein(pipe))
 		urb_flags |= URB_SHORT_NOT_OK;
 
-	if (use_sg) {
-		io->urbs[0] = usb_alloc_urb(0, mem_flags);
-		if (!io->urbs[0]) {
-			io->entries = 0;
-			goto nomem;
-		}
+	for_each_sg(sg, sg, io->entries, i) {
+		struct urb *urb;
+		unsigned len;
 
-		io->urbs[0]->dev = NULL;
-		io->urbs[0]->pipe = pipe;
-		io->urbs[0]->interval = period;
-		io->urbs[0]->transfer_flags = urb_flags;
-
-		io->urbs[0]->complete = sg_complete;
-		io->urbs[0]->context = io;
-		/* A length of zero means transfer the whole sg list */
-		io->urbs[0]->transfer_buffer_length = length;
-		if (length == 0) {
-			for_each_sg(sg, sg, io->entries, i) {
-				io->urbs[0]->transfer_buffer_length +=
-					sg_dma_len(sg);
-			}
+		urb = usb_alloc_urb(0, mem_flags);
+		if (!urb) {
+			io->entries = i;
+			goto nomem;
 		}
-		io->urbs[0]->sg = io;
-		io->urbs[0]->num_sgs = io->entries;
-		io->entries = 1;
-	} else {
-		urb_flags |= URB_NO_INTERRUPT;
-		for_each_sg(sg, sg, io->entries, i) {
-			unsigned len;
-
-			io->urbs[i] = usb_alloc_urb(0, mem_flags);
-			if (!io->urbs[i]) {
-				io->entries = i;
-				goto nomem;
+		io->urbs[i] = urb;
+
+		urb->dev = NULL;
+		urb->pipe = pipe;
+		urb->interval = period;
+		urb->transfer_flags = urb_flags;
+		urb->complete = sg_complete;
+		urb->context = io;
+		urb->sg = sg;
+
+		if (use_sg) {
+			/* There is no single transfer buffer */
+			urb->transfer_buffer = NULL;
+			urb->num_sgs = nents;
+
+			/* A length of zero means transfer the whole sg list */
+			len = length;
+			if (len == 0) {
+				for_each_sg(sg, sg, nents, i)
+					len += sg->length;
 			}
-
-			io->urbs[i]->dev = NULL;
-			io->urbs[i]->pipe = pipe;
-			io->urbs[i]->interval = period;
-			io->urbs[i]->transfer_flags = urb_flags;
-
-			io->urbs[i]->complete = sg_complete;
-			io->urbs[i]->context = io;
-
+		} else {
 			/*
-			 * Some systems need to revert to PIO when DMA is temporarily
-			 * unavailable.  For their sakes, both transfer_buffer and
-			 * transfer_dma are set when possible.
-			 *
-			 * Note that if IOMMU coalescing occurred, we cannot
-			 * trust sg_page anymore, so check if S/G list shrunk.
+			 * Some systems can't use DMA; they use PIO instead.
+			 * For their sakes, transfer_buffer is set whenever
+			 * possible.
 			 */
-			if (io->nents == io->entries && !PageHighMem(sg_page(sg)))
-				io->urbs[i]->transfer_buffer = sg_virt(sg);
+			if (!PageHighMem(sg_page(sg)))
+				urb->transfer_buffer = sg_virt(sg);
 			else
-				io->urbs[i]->transfer_buffer = NULL;
-
-			if (dma) {
-				io->urbs[i]->transfer_dma = sg_dma_address(sg);
-				len = sg_dma_len(sg);
-			} else {
-				/* hc may use _only_ transfer_buffer */
-				len = sg->length;
-			}
+				urb->transfer_buffer = NULL;
 
+			len = sg->length;
 			if (length) {
 				len = min_t(unsigned, len, length);
 				length -= len;
 				if (length == 0)
 					io->entries = i + 1;
 			}
-			io->urbs[i]->transfer_buffer_length = len;
 		}
-		io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
+		urb->transfer_buffer_length = len;
 	}
+	io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
 
 	/* transaction state */
 	io->count = io->entries;
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f073c5cb4e7..f22d03df8b1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* SKYMEDI USB_DRIVE */
 	{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* BUILDWIN Photo Frame */
+	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
+			USB_QUIRK_HONOR_BNUMINTERFACES },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 43c002e3a9a..06863befaf3 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -383,13 +383,24 @@ static DEVICE_ATTR(autosuspend, S_IRUGO | S_IWUSR,
 static const char on_string[] = "on";
 static const char auto_string[] = "auto";
 
+static void warn_level(void) {
+	static int level_warned;
+
+	if (!level_warned) {
+		level_warned = 1;
+		printk(KERN_WARNING "WARNING! power/level is deprecated; "
+				"use power/control instead\n");
+	}
+}
+
 static ssize_t
 show_level(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct usb_device *udev = to_usb_device(dev);
 	const char *p = auto_string;
 
-	if (udev->state != USB_STATE_SUSPENDED && udev->autosuspend_disabled)
+	warn_level();
+	if (udev->state != USB_STATE_SUSPENDED && !udev->dev.power.runtime_auto)
 		p = on_string;
 	return sprintf(buf, "%s\n", p);
 }
@@ -401,8 +412,9 @@ set_level(struct device *dev, struct device_attribute *attr,
 	struct usb_device *udev = to_usb_device(dev);
 	int len = count;
 	char *cp;
-	int rc;
+	int rc = count;
 
+	warn_level();
 	cp = memchr(buf, '\n', count);
 	if (cp)
 		len = cp - buf;
@@ -411,17 +423,17 @@ set_level(struct device *dev, struct device_attribute *attr,
 
 	if (len == sizeof on_string - 1 &&
 			strncmp(buf, on_string, len) == 0)
-		rc = usb_disable_autosuspend(udev);
+		usb_disable_autosuspend(udev);
 
 	else if (len == sizeof auto_string - 1 &&
 			strncmp(buf, auto_string, len) == 0)
-		rc = usb_enable_autosuspend(udev);
+		usb_enable_autosuspend(udev);
 
 	else
 		rc = -EINVAL;
 
 	usb_unlock_device(udev);
-	return (rc < 0 ? rc : count);
+	return rc;
 }
 
 static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level);
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 45a32dadb40..7c0555548ac 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -6,7 +6,7 @@
 #include <linux/log2.h>
 #include <linux/usb.h>
 #include <linux/wait.h>
-#include "hcd.h"
+#include <linux/usb/hcd.h>
 
 #define to_urb(d) container_of(d, struct urb, kref)
 
@@ -308,8 +308,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 	 * will be required to set urb->ep directly and we will eliminate
 	 * urb->pipe.
 	 */
-	ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
-			[usb_pipeendpoint(urb->pipe)];
+	ep = usb_pipe_endpoint(dev, urb->pipe);
 	if (!ep)
 		return -ENOENT;
 
@@ -333,9 +332,12 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 		is_out = usb_endpoint_dir_out(&ep->desc);
 	}
 
-	/* Cache the direction for later use */
-	urb->transfer_flags = (urb->transfer_flags & ~URB_DIR_MASK) |
-			(is_out ? URB_DIR_OUT : URB_DIR_IN);
+	/* Clear the internal flags and cache the direction for later use */
+	urb->transfer_flags &= ~(URB_DIR_MASK | URB_DMA_MAP_SINGLE |
+			URB_DMA_MAP_PAGE | URB_DMA_MAP_SG | URB_MAP_LOCAL |
+			URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL |
+			URB_DMA_SG_COMBINED);
+	urb->transfer_flags |= (is_out ? URB_DIR_OUT : URB_DIR_IN);
 
 	if (xfertype != USB_ENDPOINT_XFER_CONTROL &&
 			dev->state < USB_STATE_CONFIGURED)
@@ -396,8 +398,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 		return -EPIPE;		/* The most suitable error code :-) */
 
 	/* enforce simple/standard policy */
-	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP |
-			URB_NO_INTERRUPT | URB_DIR_MASK | URB_FREE_BUFFER);
+	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
+			URB_FREE_BUFFER);
 	switch (xfertype) {
 	case USB_ENDPOINT_XFER_BULK:
 		if (is_out)
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 0561430f2ed..397b678f1c4 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -32,6 +32,7 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
@@ -41,7 +42,6 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 
-#include "hcd.h"
 #include "usb.h"
 
 
@@ -593,76 +593,6 @@ int usb_lock_device_for_reset(struct usb_device *udev,
 }
 EXPORT_SYMBOL_GPL(usb_lock_device_for_reset);
 
-static struct usb_device *match_device(struct usb_device *dev,
-				       u16 vendor_id, u16 product_id)
-{
-	struct usb_device *ret_dev = NULL;
-	int child;
-
-	dev_dbg(&dev->dev, "check for vendor %04x, product %04x ...\n",
-	    le16_to_cpu(dev->descriptor.idVendor),
-	    le16_to_cpu(dev->descriptor.idProduct));
-
-	/* see if this device matches */
-	if ((vendor_id == le16_to_cpu(dev->descriptor.idVendor)) &&
-	    (product_id == le16_to_cpu(dev->descriptor.idProduct))) {
-		dev_dbg(&dev->dev, "matched this device!\n");
-		ret_dev = usb_get_dev(dev);
-		goto exit;
-	}
-
-	/* look through all of the children of this device */
-	for (child = 0; child < dev->maxchild; ++child) {
-		if (dev->children[child]) {
-			usb_lock_device(dev->children[child]);
-			ret_dev = match_device(dev->children[child],
-					       vendor_id, product_id);
-			usb_unlock_device(dev->children[child]);
-			if (ret_dev)
-				goto exit;
-		}
-	}
-exit:
-	return ret_dev;
-}
-
-/**
- * usb_find_device - find a specific usb device in the system
- * @vendor_id: the vendor id of the device to find
- * @product_id: the product id of the device to find
- *
- * Returns a pointer to a struct usb_device if such a specified usb
- * device is present in the system currently.  The usage count of the
- * device will be incremented if a device is found.  Make sure to call
- * usb_put_dev() when the caller is finished with the device.
- *
- * If a device with the specified vendor and product id is not found,
- * NULL is returned.
- */
-struct usb_device *usb_find_device(u16 vendor_id, u16 product_id)
-{
-	struct list_head *buslist;
-	struct usb_bus *bus;
-	struct usb_device *dev = NULL;
-
-	mutex_lock(&usb_bus_list_lock);
-	for (buslist = usb_bus_list.next;
-	     buslist != &usb_bus_list;
-	     buslist = buslist->next) {
-		bus = container_of(buslist, struct usb_bus, bus_list);
-		if (!bus->root_hub)
-			continue;
-		usb_lock_device(bus->root_hub);
-		dev = match_device(bus->root_hub, vendor_id, product_id);
-		usb_unlock_device(bus->root_hub);
-		if (dev)
-			goto exit;
-	}
-exit:
-	mutex_unlock(&usb_bus_list_lock);
-	return dev;
-}
-
 /**
  * usb_get_current_frame_number - return current bus frame number
  * @dev: the device whose bus is being queried
@@ -775,7 +705,7 @@ EXPORT_SYMBOL_GPL(usb_free_coherent);
  * @urb: urb whose transfer_buffer/setup_packet will be mapped
  *
  * Return value is either null (indicating no buffer could be mapped), or
- * the parameter.  URB_NO_TRANSFER_DMA_MAP and URB_NO_SETUP_DMA_MAP are
+ * the parameter.  URB_NO_TRANSFER_DMA_MAP is
  * added to urb->transfer_flags if the operation succeeds.  If the device
  * is connected to this system through a non-DMA controller, this operation
  * always succeeds.
@@ -803,17 +733,11 @@ struct urb *usb_buffer_map(struct urb *urb)
 			urb->transfer_buffer, urb->transfer_buffer_length,
 			usb_pipein(urb->pipe)
 				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-		if (usb_pipecontrol(urb->pipe))
-			urb->setup_dma = dma_map_single(controller,
-					urb->setup_packet,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
 	/* FIXME generic api broken like pci, can't report errors */
 	/* if (urb->transfer_dma == DMA_ADDR_INVALID) return 0; */
 	} else
 		urb->transfer_dma = ~0;
-	urb->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP
-				| URB_NO_SETUP_DMA_MAP);
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	return urb;
 }
 EXPORT_SYMBOL_GPL(usb_buffer_map);
@@ -881,18 +805,13 @@ void usb_buffer_unmap(struct urb *urb)
 			urb->transfer_dma, urb->transfer_buffer_length,
 			usb_pipein(urb->pipe)
 				? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-		if (usb_pipecontrol(urb->pipe))
-			dma_unmap_single(controller,
-					urb->setup_dma,
-					sizeof(struct usb_ctrlrequest),
-					DMA_TO_DEVICE);
 	}
-	urb->transfer_flags &= ~(URB_NO_TRANSFER_DMA_MAP
-				| URB_NO_SETUP_DMA_MAP);
+	urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP;
 }
 EXPORT_SYMBOL_GPL(usb_buffer_unmap);
 #endif  /*  0  */
 
+#if 0
 /**
  * usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
  * @dev: device to which the scatterlist will be mapped
@@ -936,6 +855,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
 			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE) ? : -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(usb_buffer_map_sg);
+#endif
 
 /* XXX DISABLED, no users currently.  If you wish to re-enable this
  * XXX please determine whether the sync is to transfer ownership of
@@ -972,6 +892,7 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
 EXPORT_SYMBOL_GPL(usb_buffer_dmasync_sg);
 #endif
 
+#if 0
 /**
  * usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
  * @dev: device to which the scatterlist will be mapped
@@ -997,6 +918,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 			is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
 }
 EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
+#endif
 
 /* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
 #ifdef MODULE
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 11a3e0fa433..649c0c5f715 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -710,6 +710,43 @@ config USB_GADGETFS
 	  Say "y" to link the driver statically, or "m" to build a
 	  dynamically linked module called "gadgetfs".
 
+config USB_FUNCTIONFS
+	tristate "Function Filesystem (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  The Function Filesystem (FunctioFS) lets one create USB
+	  composite functions in user space in the same way as GadgetFS
+	  lets one create USB gadgets in user space.  This allows creation
+	  of composite gadgets such that some of the functions are
+	  implemented in kernel space (for instance Ethernet, serial or
+	  mass storage) and other are implemented in user space.
+
+	  Say "y" to link the driver statically, or "m" to build
+	  a dynamically linked module called "g_ffs".
+
+config USB_FUNCTIONFS_ETH
+	bool "Include CDC ECM (Ethernet) function"
+	depends on USB_FUNCTIONFS && NET
+	help
+	  Include an CDC ECM (Ethernet) funcion in the CDC ECM (Funcion)
+	  Filesystem.  If you also say "y" to the RNDIS query below the
+	  gadget will have two configurations.
+
+config USB_FUNCTIONFS_RNDIS
+	bool "Include RNDIS (Ethernet) function"
+	depends on USB_FUNCTIONFS && NET
+	help
+	  Include an RNDIS (Ethernet) funcion in the Funcion Filesystem.
+	  If you also say "y" to the CDC ECM query above the gadget will
+	  have two configurations.
+
+config USB_FUNCTIONFS_GENERIC
+	bool "Include 'pure' configuration"
+	depends on USB_FUNCTIONFS && (USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+	help
+	  Include a configuration with FunctionFS and no Ethernet
+	  configuration.
+
 config USB_FILE_STORAGE
 	tristate "File-backed Storage Gadget"
 	depends on BLOCK
@@ -863,11 +900,30 @@ config USB_G_MULTI_CDC
 
 	  If unsure, say "y".
 
+config USB_G_HID
+	tristate "HID Gadget"
+	help
+	  The HID gadget driver provides generic emulation of USB
+	  Human Interface Devices (HID).
+
+	  For more information, see Documentation/usb/gadget_hid.txt which
+	  includes sample code for accessing the device files.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_hid".
 
 # put drivers that need isochronous transfer support (for audio
 # or video class gadget drivers), or specific hardware, here.
+config USB_G_WEBCAM
+	tristate "USB Webcam Gadget"
+	depends on VIDEO_DEV
+	help
+	  The Webcam Gadget acts as a composite USB Audio and Video Class
+	  device. It provides a userspace API to process UVC control requests
+	  and stream video data to the host.
 
-# - none yet
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_webcam".
 
 endchoice
 
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 43b51da8d72..9bcde110feb 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 fsl_usb2_udc-objs		:= fsl_udc_core.o
 ifeq ($(CONFIG_ARCH_MXC),y)
-fsl_usb2_udc-objs		+= fsl_mx3_udc.o
+fsl_usb2_udc-objs		+= fsl_mxc_udc.o
 endif
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
@@ -43,18 +43,24 @@ g_mass_storage-objs		:= mass_storage.o
 g_printer-objs			:= printer.o
 g_cdc-objs			:= cdc2.o
 g_multi-objs			:= multi.o
+g_hid-objs			:= hid.o
 g_nokia-objs			:= nokia.o
+g_webcam-objs			:= webcam.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
 obj-$(CONFIG_USB_ETH)		+= g_ether.o
 obj-$(CONFIG_USB_GADGETFS)	+= gadgetfs.o
+obj-$(CONFIG_USB_FUNCTIONFS)	+= g_ffs.o
+obj-$(CONFIG_USB_ETH_FUNCTIONFS)	+= g_eth_ffs.o
 obj-$(CONFIG_USB_FILE_STORAGE)	+= g_file_storage.o
 obj-$(CONFIG_USB_MASS_STORAGE)	+= g_mass_storage.o
 obj-$(CONFIG_USB_G_SERIAL)	+= g_serial.o
 obj-$(CONFIG_USB_G_PRINTER)	+= g_printer.o
 obj-$(CONFIG_USB_MIDI_GADGET)	+= g_midi.o
 obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
+obj-$(CONFIG_USB_G_HID)		+= g_hid.o
 obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
+obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
 
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 75a256f3d45..d623c7bda1f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -48,10 +48,9 @@ static int queue_dbg_open(struct inode *inode, struct file *file)
 
 	spin_lock_irq(&ep->udc->lock);
 	list_for_each_entry(req, &ep->queue, queue) {
-		req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
+		req_copy = kmemdup(req, sizeof(*req_copy), GFP_ATOMIC);
 		if (!req_copy)
 			goto fail;
-		memcpy(req_copy, req, sizeof(*req_copy));
 		list_add_tail(&req_copy->queue, queue_data);
 	}
 	spin_unlock_irq(&ep->udc->lock);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 09289bb1e20..391d169f8d0 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -36,7 +36,7 @@
  */
 
 /* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ	512
+#define USB_BUFSIZ	1024
 
 static struct usb_composite_driver *composite;
 
@@ -85,7 +85,7 @@ MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
  * This function returns the value of the function's bind(), which is
  * zero for success else a negative errno value.
  */
-int __init usb_add_function(struct usb_configuration *config,
+int usb_add_function(struct usb_configuration *config,
 		struct usb_function *function)
 {
 	int	value = -EINVAL;
@@ -215,7 +215,7 @@ int usb_function_activate(struct usb_function *function)
  * Returns the interface ID which was allocated; or -ENODEV if no
  * more interface IDs can be allocated.
  */
-int __init usb_interface_id(struct usb_configuration *config,
+int usb_interface_id(struct usb_configuration *config,
 		struct usb_function *function)
 {
 	unsigned id = config->next_interface_id;
@@ -480,7 +480,7 @@ done:
  * assigns global resources including string IDs, and per-configuration
  * resources such as interface IDs and endpoints.
  */
-int __init usb_add_config(struct usb_composite_dev *cdev,
+int usb_add_config(struct usb_composite_dev *cdev,
 		struct usb_configuration *config)
 {
 	int				status = -EINVAL;
@@ -677,7 +677,7 @@ static int get_string(struct usb_composite_dev *cdev,
  * ensure that for example different functions don't wrongly assign
  * different meanings to the same identifier.
  */
-int __init usb_string_id(struct usb_composite_dev *cdev)
+int usb_string_id(struct usb_composite_dev *cdev)
 {
 	if (cdev->next_string_id < 254) {
 		/* string id 0 is reserved */
@@ -898,7 +898,19 @@ static void composite_disconnect(struct usb_gadget *gadget)
 
 /*-------------------------------------------------------------------------*/
 
-static void /* __init_or_exit */
+static ssize_t composite_show_suspended(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct usb_gadget *gadget = dev_to_usb_gadget(dev);
+	struct usb_composite_dev *cdev = get_gadget_data(gadget);
+
+	return sprintf(buf, "%d\n", cdev->suspended);
+}
+
+static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL);
+
+static void
 composite_unbind(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
@@ -944,10 +956,11 @@ composite_unbind(struct usb_gadget *gadget)
 	}
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
+	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	composite = NULL;
 }
 
-static void __init
+static void
 string_override_one(struct usb_gadget_strings *tab, u8 id, const char *s)
 {
 	struct usb_string		*str = tab->strings;
@@ -960,7 +973,7 @@ string_override_one(struct usb_gadget_strings *tab, u8 id, const char *s)
 	}
 }
 
-static void __init
+static void
 string_override(struct usb_gadget_strings **tab, u8 id, const char *s)
 {
 	while (*tab) {
@@ -969,7 +982,7 @@ string_override(struct usb_gadget_strings **tab, u8 id, const char *s)
 	}
 }
 
-static int __init composite_bind(struct usb_gadget *gadget)
+static int composite_bind(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev;
 	int				status = -ENOMEM;
@@ -1004,6 +1017,14 @@ static int __init composite_bind(struct usb_gadget *gadget)
 	 */
 	usb_ep_autoconfig_reset(cdev->gadget);
 
+	/* standardized runtime overrides for device ID data */
+	if (idVendor)
+		cdev->desc.idVendor = cpu_to_le16(idVendor);
+	if (idProduct)
+		cdev->desc.idProduct = cpu_to_le16(idProduct);
+	if (bcdDevice)
+		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
 	/* composite gadget needs to assign strings for whole device (like
 	 * serial number), register function drivers, potentially update
 	 * power state and consumption, etc
@@ -1015,14 +1036,6 @@ static int __init composite_bind(struct usb_gadget *gadget)
 	cdev->desc = *composite->dev;
 	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-	/* standardized runtime overrides for device ID data */
-	if (idVendor)
-		cdev->desc.idVendor = cpu_to_le16(idVendor);
-	if (idProduct)
-		cdev->desc.idProduct = cpu_to_le16(idProduct);
-	if (bcdDevice)
-		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
 	/* strings can't be assigned before bind() allocates the
 	 * releavnt identifiers
 	 */
@@ -1036,6 +1049,10 @@ static int __init composite_bind(struct usb_gadget *gadget)
 		string_override(composite->strings,
 			cdev->desc.iSerialNumber, iSerialNumber);
 
+	status = device_create_file(&gadget->dev, &dev_attr_suspended);
+	if (status)
+		goto fail;
+
 	INFO(cdev, "%s ready\n", composite->name);
 	return 0;
 
@@ -1064,6 +1081,8 @@ composite_suspend(struct usb_gadget *gadget)
 	}
 	if (composite->suspend)
 		composite->suspend(cdev);
+
+	cdev->suspended = 1;
 }
 
 static void
@@ -1084,6 +1103,8 @@ composite_resume(struct usb_gadget *gadget)
 				f->resume(f);
 		}
 	}
+
+	cdev->suspended = 0;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -1092,7 +1113,6 @@ static struct usb_gadget_driver composite_driver = {
 	.speed		= USB_SPEED_HIGH,
 
 	.bind		= composite_bind,
-	/* .unbind		= __exit_p(composite_unbind), */
 	.unbind		= composite_unbind,
 
 	.setup		= composite_setup,
@@ -1121,7 +1141,7 @@ static struct usb_gadget_driver composite_driver = {
  * while it was binding.  That would usually be done in order to wait for
  * some userspace participation.
  */
-int __init usb_composite_register(struct usb_composite_driver *driver)
+int usb_composite_register(struct usb_composite_driver *driver)
 {
 	if (!driver || !driver->dev || !driver->bind || composite)
 		return -EINVAL;
@@ -1142,7 +1162,7 @@ int __init usb_composite_register(struct usb_composite_driver *driver)
  * This function is used to unregister drivers using the composite
  * driver framework.
  */
-void /* __exit */ usb_composite_unregister(struct usb_composite_driver *driver)
+void usb_composite_unregister(struct usb_composite_driver *driver)
 {
 	if (composite != driver)
 		return;
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 47e8e722682..09084fd646a 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -128,7 +128,7 @@ int usb_gadget_config_buf(
  * with identifiers (for interfaces, strings, endpoints, and more)
  * as needed by a given function instance.
  */
-struct usb_descriptor_header **__init
+struct usb_descriptor_header **
 usb_copy_descriptors(struct usb_descriptor_header **src)
 {
 	struct usb_descriptor_header **tmp;
@@ -175,7 +175,7 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
  * intended use is to help remembering the endpoint descriptor to use
  * when enabling a given endpoint.
  */
-struct usb_endpoint_descriptor *__init
+struct usb_endpoint_descriptor *
 usb_find_endpoint(
 	struct usb_descriptor_header **src,
 	struct usb_descriptor_header **copy,
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 5e096648518..4f9e578cde9 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -47,6 +47,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -55,9 +56,6 @@
 #include <asm/unaligned.h>
 
 
-#include "../core/hcd.h"
-
-
 #define DRIVER_DESC	"USB Host+Gadget Emulator"
 #define DRIVER_VERSION	"02 May 2005"
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 3568de210f7..8a832488ccd 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -34,12 +34,12 @@
 
 
 /* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
+static unsigned epnum;
 
 // #define MANY_ENDPOINTS
 #ifdef MANY_ENDPOINTS
 /* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
+static unsigned in_epnum;
 #endif
 
 
@@ -59,7 +59,7 @@ static __initdata unsigned in_epnum;
  * NOTE:  each endpoint is unidirectional, as specified by its USB
  * descriptor; and isn't specific to a configuration or altsetting.
  */
-static int __init
+static int
 ep_matches (
 	struct usb_gadget		*gadget,
 	struct usb_ep			*ep,
@@ -187,7 +187,7 @@ ep_matches (
 	return 1;
 }
 
-static struct usb_ep * __init
+static struct usb_ep *
 find_ep (struct usb_gadget *gadget, const char *name)
 {
 	struct usb_ep	*ep;
@@ -229,7 +229,7 @@ find_ep (struct usb_gadget *gadget, const char *name)
  *
  * On failure, this returns a null endpoint descriptor.
  */
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep *usb_ep_autoconfig (
 	struct usb_gadget		*gadget,
 	struct usb_endpoint_descriptor	*desc
 )
@@ -304,7 +304,7 @@ struct usb_ep * __init usb_ep_autoconfig (
  * state such as ep->driver_data and the record of assigned endpoints
  * used by usb_ep_autoconfig().
  */
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 {
 	struct usb_ep	*ep;
 
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 400e1ebe697..d47a123f15a 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -116,7 +116,7 @@ acm_iad_descriptor = {
 };
 
 
-static struct usb_interface_descriptor acm_control_interface_desc __initdata = {
+static struct usb_interface_descriptor acm_control_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	/* .bInterfaceNumber = DYNAMIC */
@@ -127,7 +127,7 @@ static struct usb_interface_descriptor acm_control_interface_desc __initdata = {
 	/* .iInterface = DYNAMIC */
 };
 
-static struct usb_interface_descriptor acm_data_interface_desc __initdata = {
+static struct usb_interface_descriptor acm_data_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	/* .bInterfaceNumber = DYNAMIC */
@@ -138,7 +138,7 @@ static struct usb_interface_descriptor acm_data_interface_desc __initdata = {
 	/* .iInterface = DYNAMIC */
 };
 
-static struct usb_cdc_header_desc acm_header_desc __initdata = {
+static struct usb_cdc_header_desc acm_header_desc = {
 	.bLength =		sizeof(acm_header_desc),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
@@ -146,7 +146,7 @@ static struct usb_cdc_header_desc acm_header_desc __initdata = {
 };
 
 static struct usb_cdc_call_mgmt_descriptor
-acm_call_mgmt_descriptor __initdata = {
+acm_call_mgmt_descriptor = {
 	.bLength =		sizeof(acm_call_mgmt_descriptor),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
@@ -154,14 +154,14 @@ acm_call_mgmt_descriptor __initdata = {
 	/* .bDataInterface = DYNAMIC */
 };
 
-static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
+static struct usb_cdc_acm_descriptor acm_descriptor = {
 	.bLength =		sizeof(acm_descriptor),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
 	.bmCapabilities =	USB_CDC_CAP_LINE,
 };
 
-static struct usb_cdc_union_desc acm_union_desc __initdata = {
+static struct usb_cdc_union_desc acm_union_desc = {
 	.bLength =		sizeof(acm_union_desc),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
@@ -171,7 +171,7 @@ static struct usb_cdc_union_desc acm_union_desc __initdata = {
 
 /* full speed support: */
 
-static struct usb_endpoint_descriptor acm_fs_notify_desc __initdata = {
+static struct usb_endpoint_descriptor acm_fs_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
@@ -180,21 +180,21 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc __initdata = {
 	.bInterval =		1 << GS_LOG2_NOTIFY_INTERVAL,
 };
 
-static struct usb_endpoint_descriptor acm_fs_in_desc __initdata = {
+static struct usb_endpoint_descriptor acm_fs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor acm_fs_out_desc __initdata = {
+static struct usb_endpoint_descriptor acm_fs_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_OUT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_descriptor_header *acm_fs_function[] __initdata = {
+static struct usb_descriptor_header *acm_fs_function[] = {
 	(struct usb_descriptor_header *) &acm_iad_descriptor,
 	(struct usb_descriptor_header *) &acm_control_interface_desc,
 	(struct usb_descriptor_header *) &acm_header_desc,
@@ -210,7 +210,7 @@ static struct usb_descriptor_header *acm_fs_function[] __initdata = {
 
 /* high speed support: */
 
-static struct usb_endpoint_descriptor acm_hs_notify_desc __initdata = {
+static struct usb_endpoint_descriptor acm_hs_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bEndpointAddress =	USB_DIR_IN,
@@ -219,21 +219,21 @@ static struct usb_endpoint_descriptor acm_hs_notify_desc __initdata = {
 	.bInterval =		GS_LOG2_NOTIFY_INTERVAL+4,
 };
 
-static struct usb_endpoint_descriptor acm_hs_in_desc __initdata = {
+static struct usb_endpoint_descriptor acm_hs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor acm_hs_out_desc __initdata = {
+static struct usb_endpoint_descriptor acm_hs_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_descriptor_header *acm_hs_function[] __initdata = {
+static struct usb_descriptor_header *acm_hs_function[] = {
 	(struct usb_descriptor_header *) &acm_iad_descriptor,
 	(struct usb_descriptor_header *) &acm_control_interface_desc,
 	(struct usb_descriptor_header *) &acm_header_desc,
@@ -571,7 +571,7 @@ static int acm_send_break(struct gserial *port, int duration)
 /*-------------------------------------------------------------------------*/
 
 /* ACM function driver setup/binding */
-static int __init
+static int
 acm_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
@@ -719,7 +719,7 @@ static inline bool can_support_cdc(struct usb_configuration *c)
  * handle all the ones it binds.  Caller is also responsible
  * for calling @gserial_cleanup() before module unload.
  */
-int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
+int acm_bind_config(struct usb_configuration *c, u8 port_num)
 {
 	struct f_acm	*acm;
 	int		status;
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 4e595324c61..544257a89ed 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -113,7 +113,7 @@ static inline unsigned ecm_bitrate(struct usb_gadget *g)
 
 /* interface descriptor: */
 
-static struct usb_interface_descriptor ecm_control_intf __initdata = {
+static struct usb_interface_descriptor ecm_control_intf = {
 	.bLength =		sizeof ecm_control_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -126,7 +126,7 @@ static struct usb_interface_descriptor ecm_control_intf __initdata = {
 	/* .iInterface = DYNAMIC */
 };
 
-static struct usb_cdc_header_desc ecm_header_desc __initdata = {
+static struct usb_cdc_header_desc ecm_header_desc = {
 	.bLength =		sizeof ecm_header_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
@@ -134,7 +134,7 @@ static struct usb_cdc_header_desc ecm_header_desc __initdata = {
 	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
-static struct usb_cdc_union_desc ecm_union_desc __initdata = {
+static struct usb_cdc_union_desc ecm_union_desc = {
 	.bLength =		sizeof(ecm_union_desc),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
@@ -142,7 +142,7 @@ static struct usb_cdc_union_desc ecm_union_desc __initdata = {
 	/* .bSlaveInterface0 =	DYNAMIC */
 };
 
-static struct usb_cdc_ether_desc ecm_desc __initdata = {
+static struct usb_cdc_ether_desc ecm_desc = {
 	.bLength =		sizeof ecm_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
@@ -157,7 +157,7 @@ static struct usb_cdc_ether_desc ecm_desc __initdata = {
 
 /* the default data interface has no endpoints ... */
 
-static struct usb_interface_descriptor ecm_data_nop_intf __initdata = {
+static struct usb_interface_descriptor ecm_data_nop_intf = {
 	.bLength =		sizeof ecm_data_nop_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -172,7 +172,7 @@ static struct usb_interface_descriptor ecm_data_nop_intf __initdata = {
 
 /* ... but the "real" data interface has two bulk endpoints */
 
-static struct usb_interface_descriptor ecm_data_intf __initdata = {
+static struct usb_interface_descriptor ecm_data_intf = {
 	.bLength =		sizeof ecm_data_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -187,7 +187,7 @@ static struct usb_interface_descriptor ecm_data_intf __initdata = {
 
 /* full speed support: */
 
-static struct usb_endpoint_descriptor fs_ecm_notify_desc __initdata = {
+static struct usb_endpoint_descriptor fs_ecm_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -197,7 +197,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc __initdata = {
 	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
 };
 
-static struct usb_endpoint_descriptor fs_ecm_in_desc __initdata = {
+static struct usb_endpoint_descriptor fs_ecm_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -205,7 +205,7 @@ static struct usb_endpoint_descriptor fs_ecm_in_desc __initdata = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor fs_ecm_out_desc __initdata = {
+static struct usb_endpoint_descriptor fs_ecm_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -213,7 +213,7 @@ static struct usb_endpoint_descriptor fs_ecm_out_desc __initdata = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_descriptor_header *ecm_fs_function[] __initdata = {
+static struct usb_descriptor_header *ecm_fs_function[] = {
 	/* CDC ECM control descriptors */
 	(struct usb_descriptor_header *) &ecm_control_intf,
 	(struct usb_descriptor_header *) &ecm_header_desc,
@@ -231,7 +231,7 @@ static struct usb_descriptor_header *ecm_fs_function[] __initdata = {
 
 /* high speed support: */
 
-static struct usb_endpoint_descriptor hs_ecm_notify_desc __initdata = {
+static struct usb_endpoint_descriptor hs_ecm_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -240,7 +240,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc __initdata = {
 	.wMaxPacketSize =	cpu_to_le16(ECM_STATUS_BYTECOUNT),
 	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
 };
-static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = {
+static struct usb_endpoint_descriptor hs_ecm_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -249,7 +249,7 @@ static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = {
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = {
+static struct usb_endpoint_descriptor hs_ecm_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -258,7 +258,7 @@ static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = {
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_descriptor_header *ecm_hs_function[] __initdata = {
+static struct usb_descriptor_header *ecm_hs_function[] = {
 	/* CDC ECM control descriptors */
 	(struct usb_descriptor_header *) &ecm_control_intf,
 	(struct usb_descriptor_header *) &ecm_header_desc,
@@ -597,7 +597,7 @@ static void ecm_close(struct gether *geth)
 
 /* ethernet function driver setup/binding */
 
-static int __init
+static int
 ecm_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
@@ -763,7 +763,8 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
  * Caller must have called @gether_setup().  Caller is also responsible
  * for calling @gether_cleanup() before module unload.
  */
-int __init ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+int
+ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 {
 	struct f_ecm	*ecm;
 	int		status;
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
new file mode 100644
index 00000000000..d69eccf5f19
--- /dev/null
+++ b/drivers/usb/gadget/f_fs.c
@@ -0,0 +1,2442 @@
+/*
+ * f_fs.c -- user mode filesystem api for usb composite funtcion controllers
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *
+ * Based on inode.c (GadgetFS):
+ * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003 Agilent Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/blkdev.h>
+#include <linux/pagemap.h>
+#include <asm/unaligned.h>
+#include <linux/smp_lock.h>
+
+#include <linux/usb/composite.h>
+#include <linux/usb/functionfs.h>
+
+
+#define FUNCTIONFS_MAGIC	0xa647361 /* Chosen by a honest dice roll ;) */
+
+
+/* Debuging *****************************************************************/
+
+#define ffs_printk(level, fmt, args...) printk(level "f_fs: " fmt "\n", ## args)
+
+#define FERR(...)  ffs_printk(KERN_ERR,  __VA_ARGS__)
+#define FINFO(...) ffs_printk(KERN_INFO, __VA_ARGS__)
+
+#ifdef DEBUG
+#  define FDBG(...) ffs_printk(KERN_DEBUG, __VA_ARGS__)
+#else
+#  define FDBG(...) do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#  define FVDBG FDBG
+#else
+#  define FVDBG(...) do { } while (0)
+#endif /* VERBOSE_DEBUG */
+
+#define ENTER()    FVDBG("%s()", __func__)
+
+#ifdef VERBOSE_DEBUG
+#  define ffs_dump_mem(prefix, ptr, len) \
+	print_hex_dump_bytes("f_fs" prefix ": ", DUMP_PREFIX_NONE, ptr, len)
+#else
+#  define ffs_dump_mem(prefix, ptr, len) do { } while (0)
+#endif
+
+
+/* The data structure and setup file ****************************************/
+
+enum ffs_state {
+	/* Waiting for descriptors and strings. */
+	/* In this state no open(2), read(2) or write(2) on epfiles
+	 * may succeed (which should not be the problem as there
+	 * should be no such files opened in the firts place). */
+	FFS_READ_DESCRIPTORS,
+	FFS_READ_STRINGS,
+
+	/* We've got descriptors and strings.  We are or have called
+	 * functionfs_ready_callback().  functionfs_bind() may have
+	 * been called but we don't know. */
+	/* This is the only state in which operations on epfiles may
+	 * succeed. */
+	FFS_ACTIVE,
+
+	/* All endpoints have been closed.  This state is also set if
+	 * we encounter an unrecoverable error.  The only
+	 * unrecoverable error is situation when after reading strings
+	 * from user space we fail to initialise EP files or
+	 * functionfs_ready_callback() returns with error (<0). */
+	/* In this state no open(2), read(2) or write(2) (both on ep0
+	 * as well as epfile) may succeed (at this point epfiles are
+	 * unlinked and all closed so this is not a problem; ep0 is
+	 * also closed but ep0 file exists and so open(2) on ep0 must
+	 * fail). */
+	FFS_CLOSING
+};
+
+
+enum ffs_setup_state {
+	/* There is no setup request pending. */
+	FFS_NO_SETUP,
+	/* User has read events and there was a setup request event
+	 * there.  The next read/write on ep0 will handle the
+	 * request. */
+	FFS_SETUP_PENDING,
+	/* There was event pending but before user space handled it
+	 * some other event was introduced which canceled existing
+	 * setup.  If this state is set read/write on ep0 return
+	 * -EIDRM.  This state is only set when adding event. */
+	FFS_SETUP_CANCELED
+};
+
+
+
+struct ffs_epfile;
+struct ffs_function;
+
+struct ffs_data {
+	struct usb_gadget		*gadget;
+
+	/* Protect access read/write operations, only one read/write
+	 * at a time.  As a consequence protects ep0req and company.
+	 * While setup request is being processed (queued) this is
+	 * held. */
+	struct mutex			mutex;
+
+	/* Protect access to enpoint related structures (basically
+	 * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for
+	 * endpint zero. */
+	spinlock_t			eps_lock;
+
+	/* XXX REVISIT do we need our own request? Since we are not
+	 * handling setup requests immidiatelly user space may be so
+	 * slow that another setup will be sent to the gadget but this
+	 * time not to us but another function and then there could be
+	 * a race.  Is taht the case? Or maybe we can use cdev->req
+	 * after all, maybe we just need some spinlock for that? */
+	struct usb_request		*ep0req;		/* P: mutex */
+	struct completion		ep0req_completion;	/* P: mutex */
+	int				ep0req_status;		/* P: mutex */
+
+	/* reference counter */
+	atomic_t			ref;
+	/* how many files are opened (EP0 and others) */
+	atomic_t			opened;
+
+	/* EP0 state */
+	enum ffs_state			state;
+
+	/*
+	 * Possible transations:
+	 * + FFS_NO_SETUP       -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
+	 *               happens only in ep0 read which is P: mutex
+	 * + FFS_SETUP_PENDING  -> FFS_NO_SETUP       -- P: ev.waitq.lock
+	 *               happens only in ep0 i/o  which is P: mutex
+	 * + FFS_SETUP_PENDING  -> FFS_SETUP_CANCELED -- P: ev.waitq.lock
+	 * + FFS_SETUP_CANCELED -> FFS_NO_SETUP       -- cmpxchg
+	 */
+	enum ffs_setup_state		setup_state;
+
+#define FFS_SETUP_STATE(ffs)					\
+	((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state,	\
+				       FFS_SETUP_CANCELED, FFS_NO_SETUP))
+
+	/* Events & such. */
+	struct {
+		u8				types[4];
+		unsigned short			count;
+		/* XXX REVISIT need to update it in some places, or do we? */
+		unsigned short			can_stall;
+		struct usb_ctrlrequest		setup;
+
+		wait_queue_head_t		waitq;
+	} ev; /* the whole structure, P: ev.waitq.lock */
+
+	/* Flags */
+	unsigned long			flags;
+#define FFS_FL_CALL_CLOSED_CALLBACK 0
+#define FFS_FL_BOUND                1
+
+	/* Active function */
+	struct ffs_function		*func;
+
+	/* Device name, write once when file system is mounted.
+	 * Intendet for user to read if she wants. */
+	const char			*dev_name;
+	/* Private data for our user (ie. gadget).  Managed by
+	 * user. */
+	void				*private_data;
+
+	/* filled by __ffs_data_got_descs() */
+	/* real descriptors are 16 bytes after raw_descs (so you need
+	 * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the
+	 * first full speed descriptor).  raw_descs_length and
+	 * raw_fs_descs_length do not have those 16 bytes added. */
+	const void			*raw_descs;
+	unsigned			raw_descs_length;
+	unsigned			raw_fs_descs_length;
+	unsigned			fs_descs_count;
+	unsigned			hs_descs_count;
+
+	unsigned short			strings_count;
+	unsigned short			interfaces_count;
+	unsigned short			eps_count;
+	unsigned short			_pad1;
+
+	/* filled by __ffs_data_got_strings() */
+	/* ids in stringtabs are set in functionfs_bind() */
+	const void			*raw_strings;
+	struct usb_gadget_strings	**stringtabs;
+
+	/* File system's super block, write once when file system is mounted. */
+	struct super_block		*sb;
+
+	/* File permissions, written once when fs is mounted*/
+	struct ffs_file_perms {
+		umode_t				mode;
+		uid_t				uid;
+		gid_t				gid;
+	}				file_perms;
+
+	/* The endpoint files, filled by ffs_epfiles_create(),
+	 * destroyed by ffs_epfiles_destroy(). */
+	struct ffs_epfile		*epfiles;
+};
+
+/* Reference counter handling */
+static void ffs_data_get(struct ffs_data *ffs);
+static void ffs_data_put(struct ffs_data *ffs);
+/* Creates new ffs_data object. */
+static struct ffs_data *__must_check ffs_data_new(void) __attribute__((malloc));
+
+/* Opened counter handling. */
+static void ffs_data_opened(struct ffs_data *ffs);
+static void ffs_data_closed(struct ffs_data *ffs);
+
+/* Called with ffs->mutex held; take over ownerrship of data. */
+static int __must_check
+__ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len);
+static int __must_check
+__ffs_data_got_strings(struct ffs_data *ffs, char *data, size_t len);
+
+
+/* The function structure ***************************************************/
+
+struct ffs_ep;
+
+struct ffs_function {
+	struct usb_configuration	*conf;
+	struct usb_gadget		*gadget;
+	struct ffs_data			*ffs;
+
+	struct ffs_ep			*eps;
+	u8				eps_revmap[16];
+	short				*interfaces_nums;
+
+	struct usb_function		function;
+};
+
+
+static struct ffs_function *ffs_func_from_usb(struct usb_function *f)
+{
+	return container_of(f, struct ffs_function, function);
+}
+
+static void ffs_func_free(struct ffs_function *func);
+
+
+static void ffs_func_eps_disable(struct ffs_function *func);
+static int __must_check ffs_func_eps_enable(struct ffs_function *func);
+
+
+static int ffs_func_bind(struct usb_configuration *,
+			 struct usb_function *);
+static void ffs_func_unbind(struct usb_configuration *,
+			    struct usb_function *);
+static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned);
+static void ffs_func_disable(struct usb_function *);
+static int ffs_func_setup(struct usb_function *,
+			  const struct usb_ctrlrequest *);
+static void ffs_func_suspend(struct usb_function *);
+static void ffs_func_resume(struct usb_function *);
+
+
+static int ffs_func_revmap_ep(struct ffs_function *func, u8 num);
+static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf);
+
+
+
+/* The endpoints structures *************************************************/
+
+struct ffs_ep {
+	struct usb_ep			*ep;	/* P: ffs->eps_lock */
+	struct usb_request		*req;	/* P: epfile->mutex */
+
+	/* [0]: full speed, [1]: high speed */
+	struct usb_endpoint_descriptor	*descs[2];
+
+	u8				num;
+
+	int				status;	/* P: epfile->mutex */
+};
+
+struct ffs_epfile {
+	/* Protects ep->ep and ep->req. */
+	struct mutex			mutex;
+	wait_queue_head_t		wait;
+
+	struct ffs_data			*ffs;
+	struct ffs_ep			*ep;	/* P: ffs->eps_lock */
+
+	struct dentry			*dentry;
+
+	char				name[5];
+
+	unsigned char			in;	/* P: ffs->eps_lock */
+	unsigned char			isoc;	/* P: ffs->eps_lock */
+
+	unsigned char			_pad;
+};
+
+
+static int  __must_check ffs_epfiles_create(struct ffs_data *ffs);
+static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count);
+
+static struct inode *__must_check
+ffs_sb_create_file(struct super_block *sb, const char *name, void *data,
+		   const struct file_operations *fops,
+		   struct dentry **dentry_p);
+
+
+/* Misc helper functions ****************************************************/
+
+static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
+	__attribute__((warn_unused_result, nonnull));
+static char *ffs_prepare_buffer(const char * __user buf, size_t len)
+	__attribute__((warn_unused_result, nonnull));
+
+
+/* Control file aka ep0 *****************************************************/
+
+static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct ffs_data *ffs = req->context;
+
+	complete_all(&ffs->ep0req_completion);
+}
+
+
+static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
+{
+	struct usb_request *req = ffs->ep0req;
+	int ret;
+
+	req->zero     = len < le16_to_cpu(ffs->ev.setup.wLength);
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+
+	req->buf      = data;
+	req->length   = len;
+
+	INIT_COMPLETION(ffs->ep0req_completion);
+
+	ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC);
+	if (unlikely(ret < 0))
+		return ret;
+
+	ret = wait_for_completion_interruptible(&ffs->ep0req_completion);
+	if (unlikely(ret)) {
+		usb_ep_dequeue(ffs->gadget->ep0, req);
+		return -EINTR;
+	}
+
+	ffs->setup_state = FFS_NO_SETUP;
+	return ffs->ep0req_status;
+}
+
+static int __ffs_ep0_stall(struct ffs_data *ffs)
+{
+	if (ffs->ev.can_stall) {
+		FVDBG("ep0 stall\n");
+		usb_ep_set_halt(ffs->gadget->ep0);
+		ffs->setup_state = FFS_NO_SETUP;
+		return -EL2HLT;
+	} else {
+		FDBG("bogus ep0 stall!\n");
+		return -ESRCH;
+	}
+}
+
+
+static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
+			     size_t len, loff_t *ptr)
+{
+	struct ffs_data *ffs = file->private_data;
+	ssize_t ret;
+	char *data;
+
+	ENTER();
+
+	/* Fast check if setup was canceled */
+	if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED)
+		return -EIDRM;
+
+	/* Acquire mutex */
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret < 0))
+		return ret;
+
+
+	/* Check state */
+	switch (ffs->state) {
+	case FFS_READ_DESCRIPTORS:
+	case FFS_READ_STRINGS:
+		/* Copy data */
+		if (unlikely(len < 16)) {
+			ret = -EINVAL;
+			break;
+		}
+
+		data = ffs_prepare_buffer(buf, len);
+		if (unlikely(IS_ERR(data))) {
+			ret = PTR_ERR(data);
+			break;
+		}
+
+		/* Handle data */
+		if (ffs->state == FFS_READ_DESCRIPTORS) {
+			FINFO("read descriptors");
+			ret = __ffs_data_got_descs(ffs, data, len);
+			if (unlikely(ret < 0))
+				break;
+
+			ffs->state = FFS_READ_STRINGS;
+			ret = len;
+		} else {
+			FINFO("read strings");
+			ret = __ffs_data_got_strings(ffs, data, len);
+			if (unlikely(ret < 0))
+				break;
+
+			ret = ffs_epfiles_create(ffs);
+			if (unlikely(ret)) {
+				ffs->state = FFS_CLOSING;
+				break;
+			}
+
+			ffs->state = FFS_ACTIVE;
+			mutex_unlock(&ffs->mutex);
+
+			ret = functionfs_ready_callback(ffs);
+			if (unlikely(ret < 0)) {
+				ffs->state = FFS_CLOSING;
+				return ret;
+			}
+
+			set_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags);
+			return len;
+		}
+		break;
+
+
+	case FFS_ACTIVE:
+		data = NULL;
+		/* We're called from user space, we can use _irq
+		 * rather then _irqsave */
+		spin_lock_irq(&ffs->ev.waitq.lock);
+		switch (FFS_SETUP_STATE(ffs)) {
+		case FFS_SETUP_CANCELED:
+			ret = -EIDRM;
+			goto done_spin;
+
+		case FFS_NO_SETUP:
+			ret = -ESRCH;
+			goto done_spin;
+
+		case FFS_SETUP_PENDING:
+			break;
+		}
+
+		/* FFS_SETUP_PENDING */
+		if (!(ffs->ev.setup.bRequestType & USB_DIR_IN)) {
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+			ret = __ffs_ep0_stall(ffs);
+			break;
+		}
+
+		/* FFS_SETUP_PENDING and not stall */
+		len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength));
+
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+
+		data = ffs_prepare_buffer(buf, len);
+		if (unlikely(IS_ERR(data))) {
+			ret = PTR_ERR(data);
+			break;
+		}
+
+		spin_lock_irq(&ffs->ev.waitq.lock);
+
+		/* We are guaranteed to be still in FFS_ACTIVE state
+		 * but the state of setup could have changed from
+		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need
+		 * to check for that.  If that happened we copied data
+		 * from user space in vain but it's unlikely. */
+		/* For sure we are not in FFS_NO_SETUP since this is
+		 * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP
+		 * transition can be performed and it's protected by
+		 * mutex. */
+
+		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
+			ret = -EIDRM;
+done_spin:
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+		} else {
+			/* unlocks spinlock */
+			ret = __ffs_ep0_queue_wait(ffs, data, len);
+		}
+		kfree(data);
+		break;
+
+
+	default:
+		ret = -EBADFD;
+		break;
+	}
+
+
+	mutex_unlock(&ffs->mutex);
+	return ret;
+}
+
+
+
+static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
+				     size_t n)
+{
+	/* We are holding ffs->ev.waitq.lock and ffs->mutex and we need
+	 * to release them. */
+
+	struct usb_functionfs_event events[n];
+	unsigned i = 0;
+
+	memset(events, 0, sizeof events);
+
+	do {
+		events[i].type = ffs->ev.types[i];
+		if (events[i].type == FUNCTIONFS_SETUP) {
+			events[i].u.setup = ffs->ev.setup;
+			ffs->setup_state = FFS_SETUP_PENDING;
+		}
+	} while (++i < n);
+
+	if (n < ffs->ev.count) {
+		ffs->ev.count -= n;
+		memmove(ffs->ev.types, ffs->ev.types + n,
+			ffs->ev.count * sizeof *ffs->ev.types);
+	} else {
+		ffs->ev.count = 0;
+	}
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+	mutex_unlock(&ffs->mutex);
+
+	return unlikely(__copy_to_user(buf, events, sizeof events))
+		? -EFAULT : sizeof events;
+}
+
+
+static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
+			    size_t len, loff_t *ptr)
+{
+	struct ffs_data *ffs = file->private_data;
+	char *data = NULL;
+	size_t n;
+	int ret;
+
+	ENTER();
+
+	/* Fast check if setup was canceled */
+	if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED)
+		return -EIDRM;
+
+	/* Acquire mutex */
+	ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret < 0))
+		return ret;
+
+
+	/* Check state */
+	if (ffs->state != FFS_ACTIVE) {
+		ret = -EBADFD;
+		goto done_mutex;
+	}
+
+
+	/* We're called from user space, we can use _irq rather then
+	 * _irqsave */
+	spin_lock_irq(&ffs->ev.waitq.lock);
+
+	switch (FFS_SETUP_STATE(ffs)) {
+	case FFS_SETUP_CANCELED:
+		ret = -EIDRM;
+		break;
+
+	case FFS_NO_SETUP:
+		n = len / sizeof(struct usb_functionfs_event);
+		if (unlikely(!n)) {
+			ret = -EINVAL;
+			break;
+		}
+
+		if ((file->f_flags & O_NONBLOCK) && !ffs->ev.count) {
+			ret = -EAGAIN;
+			break;
+		}
+
+		if (unlikely(wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq, ffs->ev.count))) {
+			ret = -EINTR;
+			break;
+		}
+
+		return __ffs_ep0_read_events(ffs, buf,
+					     min(n, (size_t)ffs->ev.count));
+
+
+	case FFS_SETUP_PENDING:
+		if (ffs->ev.setup.bRequestType & USB_DIR_IN) {
+			spin_unlock_irq(&ffs->ev.waitq.lock);
+			ret = __ffs_ep0_stall(ffs);
+			goto done_mutex;
+		}
+
+		len = min(len, (size_t)le16_to_cpu(ffs->ev.setup.wLength));
+
+		spin_unlock_irq(&ffs->ev.waitq.lock);
+
+		if (likely(len)) {
+			data = kmalloc(len, GFP_KERNEL);
+			if (unlikely(!data)) {
+				ret = -ENOMEM;
+				goto done_mutex;
+			}
+		}
+
+		spin_lock_irq(&ffs->ev.waitq.lock);
+
+		/* See ffs_ep0_write() */
+		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
+			ret = -EIDRM;
+			break;
+		}
+
+		/* unlocks spinlock */
+		ret = __ffs_ep0_queue_wait(ffs, data, len);
+		if (likely(ret > 0) && unlikely(__copy_to_user(buf, data, len)))
+			ret = -EFAULT;
+		goto done_mutex;
+
+	default:
+		ret = -EBADFD;
+		break;
+	}
+
+	spin_unlock_irq(&ffs->ev.waitq.lock);
+done_mutex:
+	mutex_unlock(&ffs->mutex);
+	kfree(data);
+	return ret;
+}
+
+
+
+static int ffs_ep0_open(struct inode *inode, struct file *file)
+{
+	struct ffs_data *ffs = inode->i_private;
+
+	ENTER();
+
+	if (unlikely(ffs->state == FFS_CLOSING))
+		return -EBUSY;
+
+	file->private_data = ffs;
+	ffs_data_opened(ffs);
+
+	return 0;
+}
+
+
+static int ffs_ep0_release(struct inode *inode, struct file *file)
+{
+	struct ffs_data *ffs = file->private_data;
+
+	ENTER();
+
+	ffs_data_closed(ffs);
+
+	return 0;
+}
+
+
+static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
+{
+	struct ffs_data *ffs = file->private_data;
+	struct usb_gadget *gadget = ffs->gadget;
+	long ret;
+
+	ENTER();
+
+	if (code == FUNCTIONFS_INTERFACE_REVMAP) {
+		struct ffs_function *func = ffs->func;
+		ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV;
+	} else if (gadget->ops->ioctl) {
+		lock_kernel();
+		ret = gadget->ops->ioctl(gadget, code, value);
+		unlock_kernel();
+	} else {
+		ret = -ENOTTY;
+	}
+
+	return ret;
+}
+
+
+static const struct file_operations ffs_ep0_operations = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+
+	.open =		ffs_ep0_open,
+	.write =	ffs_ep0_write,
+	.read =		ffs_ep0_read,
+	.release =	ffs_ep0_release,
+	.unlocked_ioctl =	ffs_ep0_ioctl,
+};
+
+
+/* "Normal" endpoints operations ********************************************/
+
+
+static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
+{
+	ENTER();
+	if (likely(req->context)) {
+		struct ffs_ep *ep = _ep->driver_data;
+		ep->status = req->status ? req->status : req->actual;
+		complete(req->context);
+	}
+}
+
+
+static ssize_t ffs_epfile_io(struct file *file,
+			     char __user *buf, size_t len, int read)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	struct ffs_ep *ep;
+	char *data = NULL;
+	ssize_t ret;
+	int halt;
+
+	goto first_try;
+	do {
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+		mutex_unlock(&epfile->mutex);
+
+first_try:
+		/* Are we still active? */
+		if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) {
+			ret = -ENODEV;
+			goto error;
+		}
+
+		/* Wait for endpoint to be enabled */
+		ep = epfile->ep;
+		if (!ep) {
+			if (file->f_flags & O_NONBLOCK) {
+				ret = -EAGAIN;
+				goto error;
+			}
+
+			if (unlikely(wait_event_interruptible
+				     (epfile->wait, (ep = epfile->ep)))) {
+				ret = -EINTR;
+				goto error;
+			}
+		}
+
+		/* Do we halt? */
+		halt = !read == !epfile->in;
+		if (halt && epfile->isoc) {
+			ret = -EINVAL;
+			goto error;
+		}
+
+		/* Allocate & copy */
+		if (!halt && !data) {
+			data = kzalloc(len, GFP_KERNEL);
+			if (unlikely(!data))
+				return -ENOMEM;
+
+			if (!read &&
+			    unlikely(__copy_from_user(data, buf, len))) {
+				ret = -EFAULT;
+				goto error;
+			}
+		}
+
+		/* We will be using request */
+		ret = ffs_mutex_lock(&epfile->mutex,
+				     file->f_flags & O_NONBLOCK);
+		if (unlikely(ret))
+			goto error;
+
+		/* We're called from user space, we can use _irq rather then
+		 * _irqsave */
+		spin_lock_irq(&epfile->ffs->eps_lock);
+
+		/* While we were acquiring mutex endpoint got disabled
+		 * or changed? */
+	} while (unlikely(epfile->ep != ep));
+
+	/* Halt */
+	if (unlikely(halt)) {
+		if (likely(epfile->ep == ep) && !WARN_ON(!ep->ep))
+			usb_ep_set_halt(ep->ep);
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+		ret = -EBADMSG;
+	} else {
+		/* Fire the request */
+		DECLARE_COMPLETION_ONSTACK(done);
+
+		struct usb_request *req = ep->req;
+		req->context  = &done;
+		req->complete = ffs_epfile_io_complete;
+		req->buf      = data;
+		req->length   = len;
+
+		ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC);
+
+		spin_unlock_irq(&epfile->ffs->eps_lock);
+
+		if (unlikely(ret < 0)) {
+			/* nop */
+		} else if (unlikely(wait_for_completion_interruptible(&done))) {
+			ret = -EINTR;
+			usb_ep_dequeue(ep->ep, req);
+		} else {
+			ret = ep->status;
+			if (read && ret > 0 &&
+			    unlikely(copy_to_user(buf, data, ret)))
+				ret = -EFAULT;
+		}
+	}
+
+	mutex_unlock(&epfile->mutex);
+error:
+	kfree(data);
+	return ret;
+}
+
+
+static ssize_t
+ffs_epfile_write(struct file *file, const char __user *buf, size_t len,
+		 loff_t *ptr)
+{
+	ENTER();
+
+	return ffs_epfile_io(file, (char __user *)buf, len, 0);
+}
+
+static ssize_t
+ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr)
+{
+	ENTER();
+
+	return ffs_epfile_io(file, buf, len, 1);
+}
+
+static int
+ffs_epfile_open(struct inode *inode, struct file *file)
+{
+	struct ffs_epfile *epfile = inode->i_private;
+
+	ENTER();
+
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	file->private_data = epfile;
+	ffs_data_opened(epfile->ffs);
+
+	return 0;
+}
+
+static int
+ffs_epfile_release(struct inode *inode, struct file *file)
+{
+	struct ffs_epfile *epfile = inode->i_private;
+
+	ENTER();
+
+	ffs_data_closed(epfile->ffs);
+
+	return 0;
+}
+
+
+static long ffs_epfile_ioctl(struct file *file, unsigned code,
+			     unsigned long value)
+{
+	struct ffs_epfile *epfile = file->private_data;
+	int ret;
+
+	ENTER();
+
+	if (WARN_ON(epfile->ffs->state != FFS_ACTIVE))
+		return -ENODEV;
+
+	spin_lock_irq(&epfile->ffs->eps_lock);
+	if (likely(epfile->ep)) {
+		switch (code) {
+		case FUNCTIONFS_FIFO_STATUS:
+			ret = usb_ep_fifo_status(epfile->ep->ep);
+			break;
+		case FUNCTIONFS_FIFO_FLUSH:
+			usb_ep_fifo_flush(epfile->ep->ep);
+			ret = 0;
+			break;
+		case FUNCTIONFS_CLEAR_HALT:
+			ret = usb_ep_clear_halt(epfile->ep->ep);
+			break;
+		case FUNCTIONFS_ENDPOINT_REVMAP:
+			ret = epfile->ep->num;
+			break;
+		default:
+			ret = -ENOTTY;
+		}
+	} else {
+		ret = -ENODEV;
+	}
+	spin_unlock_irq(&epfile->ffs->eps_lock);
+
+	return ret;
+}
+
+
+static const struct file_operations ffs_epfile_operations = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+
+	.open =		ffs_epfile_open,
+	.write =	ffs_epfile_write,
+	.read =		ffs_epfile_read,
+	.release =	ffs_epfile_release,
+	.unlocked_ioctl =	ffs_epfile_ioctl,
+};
+
+
+
+/* File system and super block operations ***********************************/
+
+/*
+ * Mounting the filesystem creates a controller file, used first for
+ * function configuration then later for event monitoring.
+ */
+
+
+static struct inode *__must_check
+ffs_sb_make_inode(struct super_block *sb, void *data,
+		  const struct file_operations *fops,
+		  const struct inode_operations *iops,
+		  struct ffs_file_perms *perms)
+{
+	struct inode *inode;
+
+	ENTER();
+
+	inode = new_inode(sb);
+
+	if (likely(inode)) {
+		struct timespec current_time = CURRENT_TIME;
+
+		inode->i_mode    = perms->mode;
+		inode->i_uid     = perms->uid;
+		inode->i_gid     = perms->gid;
+		inode->i_atime   = current_time;
+		inode->i_mtime   = current_time;
+		inode->i_ctime   = current_time;
+		inode->i_private = data;
+		if (fops)
+			inode->i_fop = fops;
+		if (iops)
+			inode->i_op  = iops;
+	}
+
+	return inode;
+}
+
+
+/* Create "regular" file */
+
+static struct inode *ffs_sb_create_file(struct super_block *sb,
+					const char *name, void *data,
+					const struct file_operations *fops,
+					struct dentry **dentry_p)
+{
+	struct ffs_data	*ffs = sb->s_fs_info;
+	struct dentry	*dentry;
+	struct inode	*inode;
+
+	ENTER();
+
+	dentry = d_alloc_name(sb->s_root, name);
+	if (unlikely(!dentry))
+		return NULL;
+
+	inode = ffs_sb_make_inode(sb, data, fops, NULL, &ffs->file_perms);
+	if (unlikely(!inode)) {
+		dput(dentry);
+		return NULL;
+	}
+
+	d_add(dentry, inode);
+	if (dentry_p)
+		*dentry_p = dentry;
+
+	return inode;
+}
+
+
+/* Super block */
+
+static const struct super_operations ffs_sb_operations = {
+	.statfs =	simple_statfs,
+	.drop_inode =	generic_delete_inode,
+};
+
+struct ffs_sb_fill_data {
+	struct ffs_file_perms perms;
+	umode_t root_mode;
+	const char *dev_name;
+};
+
+static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
+{
+	struct ffs_sb_fill_data *data = _data;
+	struct inode	*inode;
+	struct dentry	*d;
+	struct ffs_data	*ffs;
+
+	ENTER();
+
+	/* Initialize data */
+	ffs = ffs_data_new();
+	if (unlikely(!ffs))
+		goto enomem0;
+
+	ffs->sb              = sb;
+	ffs->dev_name        = data->dev_name;
+	ffs->file_perms      = data->perms;
+
+	sb->s_fs_info        = ffs;
+	sb->s_blocksize      = PAGE_CACHE_SIZE;
+	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	sb->s_magic          = FUNCTIONFS_MAGIC;
+	sb->s_op             = &ffs_sb_operations;
+	sb->s_time_gran      = 1;
+
+	/* Root inode */
+	data->perms.mode = data->root_mode;
+	inode = ffs_sb_make_inode(sb, NULL,
+				  &simple_dir_operations,
+				  &simple_dir_inode_operations,
+				  &data->perms);
+	if (unlikely(!inode))
+		goto enomem1;
+	d = d_alloc_root(inode);
+	if (unlikely(!d))
+		goto enomem2;
+	sb->s_root = d;
+
+	/* EP0 file */
+	if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs,
+					 &ffs_ep0_operations, NULL)))
+		goto enomem3;
+
+	return 0;
+
+enomem3:
+	dput(d);
+enomem2:
+	iput(inode);
+enomem1:
+	ffs_data_put(ffs);
+enomem0:
+	return -ENOMEM;
+}
+
+
+static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
+{
+	ENTER();
+
+	if (!opts || !*opts)
+		return 0;
+
+	for (;;) {
+		char *end, *eq, *comma;
+		unsigned long value;
+
+		/* Option limit */
+		comma = strchr(opts, ',');
+		if (comma)
+			*comma = 0;
+
+		/* Value limit */
+		eq = strchr(opts, '=');
+		if (unlikely(!eq)) {
+			FERR("'=' missing in %s", opts);
+			return -EINVAL;
+		}
+		*eq = 0;
+
+		/* Parse value */
+		value = simple_strtoul(eq + 1, &end, 0);
+		if (unlikely(*end != ',' && *end != 0)) {
+			FERR("%s: invalid value: %s", opts, eq + 1);
+			return -EINVAL;
+		}
+
+		/* Interpret option */
+		switch (eq - opts) {
+		case 5:
+			if (!memcmp(opts, "rmode", 5))
+				data->root_mode  = (value & 0555) | S_IFDIR;
+			else if (!memcmp(opts, "fmode", 5))
+				data->perms.mode = (value & 0666) | S_IFREG;
+			else
+				goto invalid;
+			break;
+
+		case 4:
+			if (!memcmp(opts, "mode", 4)) {
+				data->root_mode  = (value & 0555) | S_IFDIR;
+				data->perms.mode = (value & 0666) | S_IFREG;
+			} else {
+				goto invalid;
+			}
+			break;
+
+		case 3:
+			if (!memcmp(opts, "uid", 3))
+				data->perms.uid = value;
+			else if (!memcmp(opts, "gid", 3))
+				data->perms.gid = value;
+			else
+				goto invalid;
+			break;
+
+		default:
+invalid:
+			FERR("%s: invalid option", opts);
+			return -EINVAL;
+		}
+
+		/* Next iteration */
+		if (!comma)
+			break;
+		opts = comma + 1;
+	}
+
+	return 0;
+}
+
+
+/* "mount -t functionfs dev_name /dev/function" ends up here */
+
+static int
+ffs_fs_get_sb(struct file_system_type *t, int flags,
+	      const char *dev_name, void *opts, struct vfsmount *mnt)
+{
+	struct ffs_sb_fill_data data = {
+		.perms = {
+			.mode = S_IFREG | 0600,
+			.uid = 0,
+			.gid = 0
+		},
+		.root_mode = S_IFDIR | 0500,
+	};
+	int ret;
+
+	ENTER();
+
+	ret = functionfs_check_dev_callback(dev_name);
+	if (unlikely(ret < 0))
+		return ret;
+
+	ret = ffs_fs_parse_opts(&data, opts);
+	if (unlikely(ret < 0))
+		return ret;
+
+	data.dev_name = dev_name;
+	return get_sb_single(t, flags, &data, ffs_sb_fill, mnt);
+}
+
+static void
+ffs_fs_kill_sb(struct super_block *sb)
+{
+	void *ptr;
+
+	ENTER();
+
+	kill_litter_super(sb);
+	ptr = xchg(&sb->s_fs_info, NULL);
+	if (ptr)
+		ffs_data_put(ptr);
+}
+
+static struct file_system_type ffs_fs_type = {
+	.owner		= THIS_MODULE,
+	.name		= "functionfs",
+	.get_sb		= ffs_fs_get_sb,
+	.kill_sb	= ffs_fs_kill_sb,
+};
+
+
+
+/* Driver's main init/cleanup functions *************************************/
+
+
+static int functionfs_init(void)
+{
+	int ret;
+
+	ENTER();
+
+	ret = register_filesystem(&ffs_fs_type);
+	if (likely(!ret))
+		FINFO("file system registered");
+	else
+		FERR("failed registering file system (%d)", ret);
+
+	return ret;
+}
+
+static void functionfs_cleanup(void)
+{
+	ENTER();
+
+	FINFO("unloading");
+	unregister_filesystem(&ffs_fs_type);
+}
+
+
+
+/* ffs_data and ffs_function construction and destruction code **************/
+
+static void ffs_data_clear(struct ffs_data *ffs);
+static void ffs_data_reset(struct ffs_data *ffs);
+
+
+static void ffs_data_get(struct ffs_data *ffs)
+{
+	ENTER();
+
+	atomic_inc(&ffs->ref);
+}
+
+static void ffs_data_opened(struct ffs_data *ffs)
+{
+	ENTER();
+
+	atomic_inc(&ffs->ref);
+	atomic_inc(&ffs->opened);
+}
+
+static void ffs_data_put(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (unlikely(atomic_dec_and_test(&ffs->ref))) {
+		FINFO("%s(): freeing", __func__);
+		ffs_data_clear(ffs);
+		BUG_ON(mutex_is_locked(&ffs->mutex) ||
+		       spin_is_locked(&ffs->ev.waitq.lock) ||
+		       waitqueue_active(&ffs->ev.waitq) ||
+		       waitqueue_active(&ffs->ep0req_completion.wait));
+		kfree(ffs);
+	}
+}
+
+
+
+static void ffs_data_closed(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (atomic_dec_and_test(&ffs->opened)) {
+		ffs->state = FFS_CLOSING;
+		ffs_data_reset(ffs);
+	}
+
+	ffs_data_put(ffs);
+}
+
+
+static struct ffs_data *ffs_data_new(void)
+{
+	struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
+	if (unlikely(!ffs))
+		return 0;
+
+	ENTER();
+
+	atomic_set(&ffs->ref, 1);
+	atomic_set(&ffs->opened, 0);
+	ffs->state = FFS_READ_DESCRIPTORS;
+	mutex_init(&ffs->mutex);
+	spin_lock_init(&ffs->eps_lock);
+	init_waitqueue_head(&ffs->ev.waitq);
+	init_completion(&ffs->ep0req_completion);
+
+	/* XXX REVISIT need to update it in some places, or do we? */
+	ffs->ev.can_stall = 1;
+
+	return ffs;
+}
+
+
+static void ffs_data_clear(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (test_and_clear_bit(FFS_FL_CALL_CLOSED_CALLBACK, &ffs->flags))
+		functionfs_closed_callback(ffs);
+
+	BUG_ON(ffs->gadget);
+
+	if (ffs->epfiles)
+		ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count);
+
+	kfree(ffs->raw_descs);
+	kfree(ffs->raw_strings);
+	kfree(ffs->stringtabs);
+}
+
+
+static void ffs_data_reset(struct ffs_data *ffs)
+{
+	ENTER();
+
+	ffs_data_clear(ffs);
+
+	ffs->epfiles = NULL;
+	ffs->raw_descs = NULL;
+	ffs->raw_strings = NULL;
+	ffs->stringtabs = NULL;
+
+	ffs->raw_descs_length = 0;
+	ffs->raw_fs_descs_length = 0;
+	ffs->fs_descs_count = 0;
+	ffs->hs_descs_count = 0;
+
+	ffs->strings_count = 0;
+	ffs->interfaces_count = 0;
+	ffs->eps_count = 0;
+
+	ffs->ev.count = 0;
+
+	ffs->state = FFS_READ_DESCRIPTORS;
+	ffs->setup_state = FFS_NO_SETUP;
+	ffs->flags = 0;
+}
+
+
+static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
+{
+	unsigned i, count;
+
+	ENTER();
+
+	if (WARN_ON(ffs->state != FFS_ACTIVE
+		 || test_and_set_bit(FFS_FL_BOUND, &ffs->flags)))
+		return -EBADFD;
+
+	ffs_data_get(ffs);
+
+	ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
+	if (unlikely(!ffs->ep0req))
+		return -ENOMEM;
+	ffs->ep0req->complete = ffs_ep0_complete;
+	ffs->ep0req->context = ffs;
+
+	/* Get strings identifiers */
+	for (count = ffs->strings_count, i = 0; i < count; ++i) {
+		struct usb_gadget_strings **lang;
+
+		int id = usb_string_id(cdev);
+		if (unlikely(id < 0)) {
+			usb_ep_free_request(cdev->gadget->ep0, ffs->ep0req);
+			ffs->ep0req = NULL;
+			return id;
+		}
+
+		lang = ffs->stringtabs;
+		do {
+			(*lang)->strings[i].id = id;
+			++lang;
+		} while (*lang);
+	}
+
+	ffs->gadget = cdev->gadget;
+	return 0;
+}
+
+
+static void functionfs_unbind(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (!WARN_ON(!ffs->gadget)) {
+		usb_ep_free_request(ffs->gadget->ep0, ffs->ep0req);
+		ffs->ep0req = NULL;
+		ffs->gadget = NULL;
+		ffs_data_put(ffs);
+	}
+}
+
+
+static int ffs_epfiles_create(struct ffs_data *ffs)
+{
+	struct ffs_epfile *epfile, *epfiles;
+	unsigned i, count;
+
+	ENTER();
+
+	count = ffs->eps_count;
+	epfiles = kzalloc(count * sizeof *epfiles, GFP_KERNEL);
+	if (!epfiles)
+		return -ENOMEM;
+
+	epfile = epfiles;
+	for (i = 1; i <= count; ++i, ++epfile) {
+		epfile->ffs = ffs;
+		mutex_init(&epfile->mutex);
+		init_waitqueue_head(&epfile->wait);
+		sprintf(epfiles->name, "ep%u",  i);
+		if (!unlikely(ffs_sb_create_file(ffs->sb, epfiles->name, epfile,
+						 &ffs_epfile_operations,
+						 &epfile->dentry))) {
+			ffs_epfiles_destroy(epfiles, i - 1);
+			return -ENOMEM;
+		}
+	}
+
+	ffs->epfiles = epfiles;
+	return 0;
+}
+
+
+static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
+{
+	struct ffs_epfile *epfile = epfiles;
+
+	ENTER();
+
+	for (; count; --count, ++epfile) {
+		BUG_ON(mutex_is_locked(&epfile->mutex) ||
+		       waitqueue_active(&epfile->wait));
+		if (epfile->dentry) {
+			d_delete(epfile->dentry);
+			dput(epfile->dentry);
+			epfile->dentry = NULL;
+		}
+	}
+
+	kfree(epfiles);
+}
+
+
+static int functionfs_add(struct usb_composite_dev *cdev,
+			  struct usb_configuration *c,
+			  struct ffs_data *ffs)
+{
+	struct ffs_function *func;
+	int ret;
+
+	ENTER();
+
+	func = kzalloc(sizeof *func, GFP_KERNEL);
+	if (unlikely(!func))
+		return -ENOMEM;
+
+	func->function.name    = "Function FS Gadget";
+	func->function.strings = ffs->stringtabs;
+
+	func->function.bind    = ffs_func_bind;
+	func->function.unbind  = ffs_func_unbind;
+	func->function.set_alt = ffs_func_set_alt;
+	/*func->function.get_alt = ffs_func_get_alt;*/
+	func->function.disable = ffs_func_disable;
+	func->function.setup   = ffs_func_setup;
+	func->function.suspend = ffs_func_suspend;
+	func->function.resume  = ffs_func_resume;
+
+	func->conf   = c;
+	func->gadget = cdev->gadget;
+	func->ffs = ffs;
+	ffs_data_get(ffs);
+
+	ret = usb_add_function(c, &func->function);
+	if (unlikely(ret))
+		ffs_func_free(func);
+
+	return ret;
+}
+
+static void ffs_func_free(struct ffs_function *func)
+{
+	ENTER();
+
+	ffs_data_put(func->ffs);
+
+	kfree(func->eps);
+	/* eps and interfaces_nums are allocated in the same chunk so
+	 * only one free is required.  Descriptors are also allocated
+	 * in the same chunk. */
+
+	kfree(func);
+}
+
+
+static void ffs_func_eps_disable(struct ffs_function *func)
+{
+	struct ffs_ep *ep         = func->eps;
+	struct ffs_epfile *epfile = func->ffs->epfiles;
+	unsigned count            = func->ffs->eps_count;
+	unsigned long flags;
+
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	do {
+		/* pending requests get nuked */
+		if (likely(ep->ep))
+			usb_ep_disable(ep->ep);
+		epfile->ep = NULL;
+
+		++ep;
+		++epfile;
+	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+}
+
+static int ffs_func_eps_enable(struct ffs_function *func)
+{
+	struct ffs_data *ffs      = func->ffs;
+	struct ffs_ep *ep         = func->eps;
+	struct ffs_epfile *epfile = ffs->epfiles;
+	unsigned count            = ffs->eps_count;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&func->ffs->eps_lock, flags);
+	do {
+		struct usb_endpoint_descriptor *ds;
+		ds = ep->descs[ep->descs[1] ? 1 : 0];
+
+		ep->ep->driver_data = ep;
+		ret = usb_ep_enable(ep->ep, ds);
+		if (likely(!ret)) {
+			epfile->ep = ep;
+			epfile->in = usb_endpoint_dir_in(ds);
+			epfile->isoc = usb_endpoint_xfer_isoc(ds);
+		} else {
+			break;
+		}
+
+		wake_up(&epfile->wait);
+
+		++ep;
+		++epfile;
+	} while (--count);
+	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
+
+	return ret;
+}
+
+
+/* Parsing and building descriptors and strings *****************************/
+
+
+/* This validates if data pointed by data is a valid USB descriptor as
+ * well as record how many interfaces, endpoints and strings are
+ * required by given configuration.  Returns address afther the
+ * descriptor or NULL if data is invalid. */
+
+enum ffs_entity_type {
+	FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT
+};
+
+typedef int (*ffs_entity_callback)(enum ffs_entity_type entity,
+				   u8 *valuep,
+				   struct usb_descriptor_header *desc,
+				   void *priv);
+
+static int __must_check ffs_do_desc(char *data, unsigned len,
+				    ffs_entity_callback entity, void *priv)
+{
+	struct usb_descriptor_header *_ds = (void *)data;
+	u8 length;
+	int ret;
+
+	ENTER();
+
+	/* At least two bytes are required: length and type */
+	if (len < 2) {
+		FVDBG("descriptor too short");
+		return -EINVAL;
+	}
+
+	/* If we have at least as many bytes as the descriptor takes? */
+	length = _ds->bLength;
+	if (len < length) {
+		FVDBG("descriptor longer then available data");
+		return -EINVAL;
+	}
+
+#define __entity_check_INTERFACE(val)  1
+#define __entity_check_STRING(val)     (val)
+#define __entity_check_ENDPOINT(val)   ((val) & USB_ENDPOINT_NUMBER_MASK)
+#define __entity(type, val) do {					\
+		FVDBG("entity " #type "(%02x)", (val));			\
+		if (unlikely(!__entity_check_ ##type(val))) {		\
+			FVDBG("invalid entity's value");		\
+			return -EINVAL;					\
+		}							\
+		ret = entity(FFS_ ##type, &val, _ds, priv);		\
+		if (unlikely(ret < 0)) {				\
+			FDBG("entity " #type "(%02x); ret = %d",	\
+			     (val), ret);				\
+			return ret;					\
+		}							\
+	} while (0)
+
+	/* Parse descriptor depending on type. */
+	switch (_ds->bDescriptorType) {
+	case USB_DT_DEVICE:
+	case USB_DT_CONFIG:
+	case USB_DT_STRING:
+	case USB_DT_DEVICE_QUALIFIER:
+		/* function can't have any of those */
+		FVDBG("descriptor reserved for gadget: %d", _ds->bDescriptorType);
+		return -EINVAL;
+
+	case USB_DT_INTERFACE: {
+		struct usb_interface_descriptor *ds = (void *)_ds;
+		FVDBG("interface descriptor");
+		if (length != sizeof *ds)
+			goto inv_length;
+
+		__entity(INTERFACE, ds->bInterfaceNumber);
+		if (ds->iInterface)
+			__entity(STRING, ds->iInterface);
+	}
+		break;
+
+	case USB_DT_ENDPOINT: {
+		struct usb_endpoint_descriptor *ds = (void *)_ds;
+		FVDBG("endpoint descriptor");
+		if (length != USB_DT_ENDPOINT_SIZE &&
+		    length != USB_DT_ENDPOINT_AUDIO_SIZE)
+			goto inv_length;
+		__entity(ENDPOINT, ds->bEndpointAddress);
+	}
+		break;
+
+	case USB_DT_OTG:
+		if (length != sizeof(struct usb_otg_descriptor))
+			goto inv_length;
+		break;
+
+	case USB_DT_INTERFACE_ASSOCIATION: {
+		struct usb_interface_assoc_descriptor *ds = (void *)_ds;
+		FVDBG("interface association descriptor");
+		if (length != sizeof *ds)
+			goto inv_length;
+		if (ds->iFunction)
+			__entity(STRING, ds->iFunction);
+	}
+		break;
+
+	case USB_DT_OTHER_SPEED_CONFIG:
+	case USB_DT_INTERFACE_POWER:
+	case USB_DT_DEBUG:
+	case USB_DT_SECURITY:
+	case USB_DT_CS_RADIO_CONTROL:
+		/* TODO */
+		FVDBG("unimplemented descriptor: %d", _ds->bDescriptorType);
+		return -EINVAL;
+
+	default:
+		/* We should never be here */
+		FVDBG("unknown descriptor: %d", _ds->bDescriptorType);
+		return -EINVAL;
+
+	inv_length:
+		FVDBG("invalid length: %d (descriptor %d)",
+		      _ds->bLength, _ds->bDescriptorType);
+		return -EINVAL;
+	}
+
+#undef __entity
+#undef __entity_check_DESCRIPTOR
+#undef __entity_check_INTERFACE
+#undef __entity_check_STRING
+#undef __entity_check_ENDPOINT
+
+	return length;
+}
+
+
+static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
+				     ffs_entity_callback entity, void *priv)
+{
+	const unsigned _len = len;
+	unsigned long num = 0;
+
+	ENTER();
+
+	for (;;) {
+		int ret;
+
+		if (num == count)
+			data = NULL;
+
+		/* Record "descriptor" entitny */
+		ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv);
+		if (unlikely(ret < 0)) {
+			FDBG("entity DESCRIPTOR(%02lx); ret = %d", num, ret);
+			return ret;
+		}
+
+		if (!data)
+			return _len - len;
+
+		ret = ffs_do_desc(data, len, entity, priv);
+		if (unlikely(ret < 0)) {
+			FDBG("%s returns %d", __func__, ret);
+			return ret;
+		}
+
+		len -= ret;
+		data += ret;
+		++num;
+	}
+}
+
+
+static int __ffs_data_do_entity(enum ffs_entity_type type,
+				u8 *valuep, struct usb_descriptor_header *desc,
+				void *priv)
+{
+	struct ffs_data *ffs = priv;
+
+	ENTER();
+
+	switch (type) {
+	case FFS_DESCRIPTOR:
+		break;
+
+	case FFS_INTERFACE:
+		/* Interfaces are indexed from zero so if we
+		 * encountered interface "n" then there are at least
+		 * "n+1" interfaces. */
+		if (*valuep >= ffs->interfaces_count)
+			ffs->interfaces_count = *valuep + 1;
+		break;
+
+	case FFS_STRING:
+		/* Strings are indexed from 1 (0 is magic ;) reserved
+		 * for languages list or some such) */
+		if (*valuep > ffs->strings_count)
+			ffs->strings_count = *valuep;
+		break;
+
+	case FFS_ENDPOINT:
+		/* Endpoints are indexed from 1 as well. */
+		if ((*valuep & USB_ENDPOINT_NUMBER_MASK) > ffs->eps_count)
+			ffs->eps_count = (*valuep & USB_ENDPOINT_NUMBER_MASK);
+		break;
+	}
+
+	return 0;
+}
+
+
+static int __ffs_data_got_descs(struct ffs_data *ffs,
+				char *const _data, size_t len)
+{
+	unsigned fs_count, hs_count;
+	int fs_len, ret = -EINVAL;
+	char *data = _data;
+
+	ENTER();
+
+	if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC ||
+		     get_unaligned_le32(data + 4) != len))
+		goto error;
+	fs_count = get_unaligned_le32(data +  8);
+	hs_count = get_unaligned_le32(data + 12);
+
+	if (!fs_count && !hs_count)
+		goto einval;
+
+	data += 16;
+	len  -= 16;
+
+	if (likely(fs_count)) {
+		fs_len = ffs_do_descs(fs_count, data, len,
+				      __ffs_data_do_entity, ffs);
+		if (unlikely(fs_len < 0)) {
+			ret = fs_len;
+			goto error;
+		}
+
+		data += fs_len;
+		len  -= fs_len;
+	} else {
+		fs_len = 0;
+	}
+
+	if (likely(hs_count)) {
+		ret = ffs_do_descs(hs_count, data, len,
+				   __ffs_data_do_entity, ffs);
+		if (unlikely(ret < 0))
+			goto error;
+	} else {
+		ret = 0;
+	}
+
+	if (unlikely(len != ret))
+		goto einval;
+
+	ffs->raw_fs_descs_length = fs_len;
+	ffs->raw_descs_length    = fs_len + ret;
+	ffs->raw_descs           = _data;
+	ffs->fs_descs_count      = fs_count;
+	ffs->hs_descs_count      = hs_count;
+
+	return 0;
+
+einval:
+	ret = -EINVAL;
+error:
+	kfree(_data);
+	return ret;
+}
+
+
+
+static int __ffs_data_got_strings(struct ffs_data *ffs,
+				  char *const _data, size_t len)
+{
+	u32 str_count, needed_count, lang_count;
+	struct usb_gadget_strings **stringtabs, *t;
+	struct usb_string *strings, *s;
+	const char *data = _data;
+
+	ENTER();
+
+	if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC ||
+		     get_unaligned_le32(data + 4) != len))
+		goto error;
+	str_count  = get_unaligned_le32(data + 8);
+	lang_count = get_unaligned_le32(data + 12);
+
+	/* if one is zero the other must be zero */
+	if (unlikely(!str_count != !lang_count))
+		goto error;
+
+	/* Do we have at least as many strings as descriptors need? */
+	needed_count = ffs->strings_count;
+	if (unlikely(str_count < needed_count))
+		goto error;
+
+	/* If we don't need any strings just return and free all
+	 * memory */
+	if (!needed_count) {
+		kfree(_data);
+		return 0;
+	}
+
+	/* Allocate */
+	{
+		/* Allocate everything in one chunk so there's less
+		 * maintanance. */
+		struct {
+			struct usb_gadget_strings *stringtabs[lang_count + 1];
+			struct usb_gadget_strings stringtab[lang_count];
+			struct usb_string strings[lang_count*(needed_count+1)];
+		} *d;
+		unsigned i = 0;
+
+		d = kmalloc(sizeof *d, GFP_KERNEL);
+		if (unlikely(!d)) {
+			kfree(_data);
+			return -ENOMEM;
+		}
+
+		stringtabs = d->stringtabs;
+		t = d->stringtab;
+		i = lang_count;
+		do {
+			*stringtabs++ = t++;
+		} while (--i);
+		*stringtabs = NULL;
+
+		stringtabs = d->stringtabs;
+		t = d->stringtab;
+		s = d->strings;
+		strings = s;
+	}
+
+	/* For each language */
+	data += 16;
+	len -= 16;
+
+	do { /* lang_count > 0 so we can use do-while */
+		unsigned needed = needed_count;
+
+		if (unlikely(len < 3))
+			goto error_free;
+		t->language = get_unaligned_le16(data);
+		t->strings  = s;
+		++t;
+
+		data += 2;
+		len -= 2;
+
+		/* For each string */
+		do { /* str_count > 0 so we can use do-while */
+			size_t length = strnlen(data, len);
+
+			if (unlikely(length == len))
+				goto error_free;
+
+			/* user may provide more strings then we need,
+			 * if that's the case we simply ingore the
+			 * rest */
+			if (likely(needed)) {
+				/* s->id will be set while adding
+				 * function to configuration so for
+				 * now just leave garbage here. */
+				s->s = data;
+				--needed;
+				++s;
+			}
+
+			data += length + 1;
+			len -= length + 1;
+		} while (--str_count);
+
+		s->id = 0;   /* terminator */
+		s->s = NULL;
+		++s;
+
+	} while (--lang_count);
+
+	/* Some garbage left? */
+	if (unlikely(len))
+		goto error_free;
+
+	/* Done! */
+	ffs->stringtabs = stringtabs;
+	ffs->raw_strings = _data;
+
+	return 0;
+
+error_free:
+	kfree(stringtabs);
+error:
+	kfree(_data);
+	return -EINVAL;
+}
+
+
+
+
+/* Events handling and management *******************************************/
+
+static void __ffs_event_add(struct ffs_data *ffs,
+			    enum usb_functionfs_event_type type)
+{
+	enum usb_functionfs_event_type rem_type1, rem_type2 = type;
+	int neg = 0;
+
+	/* Abort any unhandled setup */
+	/* We do not need to worry about some cmpxchg() changing value
+	 * of ffs->setup_state without holding the lock because when
+	 * state is FFS_SETUP_PENDING cmpxchg() in several places in
+	 * the source does nothing. */
+	if (ffs->setup_state == FFS_SETUP_PENDING)
+		ffs->setup_state = FFS_SETUP_CANCELED;
+
+	switch (type) {
+	case FUNCTIONFS_RESUME:
+		rem_type2 = FUNCTIONFS_SUSPEND;
+		/* FALL THGOUTH */
+	case FUNCTIONFS_SUSPEND:
+	case FUNCTIONFS_SETUP:
+		rem_type1 = type;
+		/* discard all similar events */
+		break;
+
+	case FUNCTIONFS_BIND:
+	case FUNCTIONFS_UNBIND:
+	case FUNCTIONFS_DISABLE:
+	case FUNCTIONFS_ENABLE:
+		/* discard everything other then power management. */
+		rem_type1 = FUNCTIONFS_SUSPEND;
+		rem_type2 = FUNCTIONFS_RESUME;
+		neg = 1;
+		break;
+
+	default:
+		BUG();
+	}
+
+	{
+		u8 *ev  = ffs->ev.types, *out = ev;
+		unsigned n = ffs->ev.count;
+		for (; n; --n, ++ev)
+			if ((*ev == rem_type1 || *ev == rem_type2) == neg)
+				*out++ = *ev;
+			else
+				FVDBG("purging event %d", *ev);
+		ffs->ev.count = out - ffs->ev.types;
+	}
+
+	FVDBG("adding event %d", type);
+	ffs->ev.types[ffs->ev.count++] = type;
+	wake_up_locked(&ffs->ev.waitq);
+}
+
+static void ffs_event_add(struct ffs_data *ffs,
+			  enum usb_functionfs_event_type type)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
+	__ffs_event_add(ffs, type);
+	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+}
+
+
+/* Bind/unbind USB function hooks *******************************************/
+
+static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
+				    struct usb_descriptor_header *desc,
+				    void *priv)
+{
+	struct usb_endpoint_descriptor *ds = (void *)desc;
+	struct ffs_function *func = priv;
+	struct ffs_ep *ffs_ep;
+
+	/* If hs_descriptors is not NULL then we are reading hs
+	 * descriptors now */
+	const int isHS = func->function.hs_descriptors != NULL;
+	unsigned idx;
+
+	if (type != FFS_DESCRIPTOR)
+		return 0;
+
+	if (isHS)
+		func->function.hs_descriptors[(long)valuep] = desc;
+	else
+		func->function.descriptors[(long)valuep]    = desc;
+
+	if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT)
+		return 0;
+
+	idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1;
+	ffs_ep = func->eps + idx;
+
+	if (unlikely(ffs_ep->descs[isHS])) {
+		FVDBG("two %sspeed descriptors for EP %d",
+		      isHS ? "high" : "full",
+		      ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		return -EINVAL;
+	}
+	ffs_ep->descs[isHS] = ds;
+
+	ffs_dump_mem(": Original  ep desc", ds, ds->bLength);
+	if (ffs_ep->ep) {
+		ds->bEndpointAddress = ffs_ep->descs[0]->bEndpointAddress;
+		if (!ds->wMaxPacketSize)
+			ds->wMaxPacketSize = ffs_ep->descs[0]->wMaxPacketSize;
+	} else {
+		struct usb_request *req;
+		struct usb_ep *ep;
+
+		FVDBG("autoconfig");
+		ep = usb_ep_autoconfig(func->gadget, ds);
+		if (unlikely(!ep))
+			return -ENOTSUPP;
+		ep->driver_data = func->eps + idx;;
+
+		req = usb_ep_alloc_request(ep, GFP_KERNEL);
+		if (unlikely(!req))
+			return -ENOMEM;
+
+		ffs_ep->ep  = ep;
+		ffs_ep->req = req;
+		func->eps_revmap[ds->bEndpointAddress &
+				 USB_ENDPOINT_NUMBER_MASK] = idx + 1;
+	}
+	ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength);
+
+	return 0;
+}
+
+
+static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
+				   struct usb_descriptor_header *desc,
+				   void *priv)
+{
+	struct ffs_function *func = priv;
+	unsigned idx;
+	u8 newValue;
+
+	switch (type) {
+	default:
+	case FFS_DESCRIPTOR:
+		/* Handled in previous pass by __ffs_func_bind_do_descs() */
+		return 0;
+
+	case FFS_INTERFACE:
+		idx = *valuep;
+		if (func->interfaces_nums[idx] < 0) {
+			int id = usb_interface_id(func->conf, &func->function);
+			if (unlikely(id < 0))
+				return id;
+			func->interfaces_nums[idx] = id;
+		}
+		newValue = func->interfaces_nums[idx];
+		break;
+
+	case FFS_STRING:
+		/* String' IDs are allocated when fsf_data is bound to cdev */
+		newValue = func->ffs->stringtabs[0]->strings[*valuep - 1].id;
+		break;
+
+	case FFS_ENDPOINT:
+		/* USB_DT_ENDPOINT are handled in
+		 * __ffs_func_bind_do_descs(). */
+		if (desc->bDescriptorType == USB_DT_ENDPOINT)
+			return 0;
+
+		idx = (*valuep & USB_ENDPOINT_NUMBER_MASK) - 1;
+		if (unlikely(!func->eps[idx].ep))
+			return -EINVAL;
+
+		{
+			struct usb_endpoint_descriptor **descs;
+			descs = func->eps[idx].descs;
+			newValue = descs[descs[0] ? 0 : 1]->bEndpointAddress;
+		}
+		break;
+	}
+
+	FVDBG("%02x -> %02x", *valuep, newValue);
+	*valuep = newValue;
+	return 0;
+}
+
+static int ffs_func_bind(struct usb_configuration *c,
+			 struct usb_function *f)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+
+	const int full = !!func->ffs->fs_descs_count;
+	const int high = gadget_is_dualspeed(func->gadget) &&
+		func->ffs->hs_descs_count;
+
+	int ret;
+
+	/* Make it a single chunk, less management later on */
+	struct {
+		struct ffs_ep eps[ffs->eps_count];
+		struct usb_descriptor_header
+			*fs_descs[full ? ffs->fs_descs_count + 1 : 0];
+		struct usb_descriptor_header
+			*hs_descs[high ? ffs->hs_descs_count + 1 : 0];
+		short inums[ffs->interfaces_count];
+		char raw_descs[high ? ffs->raw_descs_length
+				    : ffs->raw_fs_descs_length];
+	} *data;
+
+	ENTER();
+
+	/* Only high speed but not supported by gadget? */
+	if (unlikely(!(full | high)))
+		return -ENOTSUPP;
+
+	/* Allocate */
+	data = kmalloc(sizeof *data, GFP_KERNEL);
+	if (unlikely(!data))
+		return -ENOMEM;
+
+	/* Zero */
+	memset(data->eps, 0, sizeof data->eps);
+	memcpy(data->raw_descs, ffs->raw_descs + 16, sizeof data->raw_descs);
+	memset(data->inums, 0xff, sizeof data->inums);
+	for (ret = ffs->eps_count; ret; --ret)
+		data->eps[ret].num = -1;
+
+	/* Save pointers */
+	func->eps             = data->eps;
+	func->interfaces_nums = data->inums;
+
+	/* Go throught all the endpoint descriptors and allocate
+	 * endpoints first, so that later we can rewrite the endpoint
+	 * numbers without worying that it may be described later on. */
+	if (likely(full)) {
+		func->function.descriptors = data->fs_descs;
+		ret = ffs_do_descs(ffs->fs_descs_count,
+				   data->raw_descs,
+				   sizeof data->raw_descs,
+				   __ffs_func_bind_do_descs, func);
+		if (unlikely(ret < 0))
+			goto error;
+	} else {
+		ret = 0;
+	}
+
+	if (likely(high)) {
+		func->function.hs_descriptors = data->hs_descs;
+		ret = ffs_do_descs(ffs->hs_descs_count,
+				   data->raw_descs + ret,
+				   (sizeof data->raw_descs) - ret,
+				   __ffs_func_bind_do_descs, func);
+	}
+
+	/* Now handle interface numbers allocation and interface and
+	 * enpoint numbers rewritting.  We can do that in one go
+	 * now. */
+	ret = ffs_do_descs(ffs->fs_descs_count +
+			   (high ? ffs->hs_descs_count : 0),
+			   data->raw_descs, sizeof data->raw_descs,
+			   __ffs_func_bind_do_nums, func);
+	if (unlikely(ret < 0))
+		goto error;
+
+	/* And we're done */
+	ffs_event_add(ffs, FUNCTIONFS_BIND);
+	return 0;
+
+error:
+	/* XXX Do we need to release all claimed endpoints here? */
+	return ret;
+}
+
+
+/* Other USB function hooks *************************************************/
+
+static void ffs_func_unbind(struct usb_configuration *c,
+			    struct usb_function *f)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+
+	ENTER();
+
+	if (ffs->func == func) {
+		ffs_func_eps_disable(func);
+		ffs->func = NULL;
+	}
+
+	ffs_event_add(ffs, FUNCTIONFS_UNBIND);
+
+	ffs_func_free(func);
+}
+
+
+static int ffs_func_set_alt(struct usb_function *f,
+			    unsigned interface, unsigned alt)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	int ret = 0, intf;
+
+	if (alt != (unsigned)-1) {
+		intf = ffs_func_revmap_intf(func, interface);
+		if (unlikely(intf < 0))
+			return intf;
+	}
+
+	if (ffs->func)
+		ffs_func_eps_disable(ffs->func);
+
+	if (ffs->state != FFS_ACTIVE)
+		return -ENODEV;
+
+	if (alt == (unsigned)-1) {
+		ffs->func = NULL;
+		ffs_event_add(ffs, FUNCTIONFS_DISABLE);
+		return 0;
+	}
+
+	ffs->func = func;
+	ret = ffs_func_eps_enable(func);
+	if (likely(ret >= 0))
+		ffs_event_add(ffs, FUNCTIONFS_ENABLE);
+	return ret;
+}
+
+static void ffs_func_disable(struct usb_function *f)
+{
+	ffs_func_set_alt(f, 0, (unsigned)-1);
+}
+
+static int ffs_func_setup(struct usb_function *f,
+			  const struct usb_ctrlrequest *creq)
+{
+	struct ffs_function *func = ffs_func_from_usb(f);
+	struct ffs_data *ffs = func->ffs;
+	unsigned long flags;
+	int ret;
+
+	ENTER();
+
+	FVDBG("creq->bRequestType = %02x", creq->bRequestType);
+	FVDBG("creq->bRequest     = %02x", creq->bRequest);
+	FVDBG("creq->wValue       = %04x", le16_to_cpu(creq->wValue));
+	FVDBG("creq->wIndex       = %04x", le16_to_cpu(creq->wIndex));
+	FVDBG("creq->wLength      = %04x", le16_to_cpu(creq->wLength));
+
+	/* Most requests directed to interface go throught here
+	 * (notable exceptions are set/get interface) so we need to
+	 * handle them.  All other either handled by composite or
+	 * passed to usb_configuration->setup() (if one is set).  No
+	 * matter, we will handle requests directed to endpoint here
+	 * as well (as it's straightforward) but what to do with any
+	 * other request? */
+
+	if (ffs->state != FFS_ACTIVE)
+		return -ENODEV;
+
+	switch (creq->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_INTERFACE:
+		ret = ffs_func_revmap_intf(func, le16_to_cpu(creq->wIndex));
+		if (unlikely(ret < 0))
+			return ret;
+		break;
+
+	case USB_RECIP_ENDPOINT:
+		ret = ffs_func_revmap_ep(func, le16_to_cpu(creq->wIndex));
+		if (unlikely(ret < 0))
+			return ret;
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	spin_lock_irqsave(&ffs->ev.waitq.lock, flags);
+	ffs->ev.setup = *creq;
+	ffs->ev.setup.wIndex = cpu_to_le16(ret);
+	__ffs_event_add(ffs, FUNCTIONFS_SETUP);
+	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
+
+	return 0;
+}
+
+static void ffs_func_suspend(struct usb_function *f)
+{
+	ENTER();
+	ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_SUSPEND);
+}
+
+static void ffs_func_resume(struct usb_function *f)
+{
+	ENTER();
+	ffs_event_add(ffs_func_from_usb(f)->ffs, FUNCTIONFS_RESUME);
+}
+
+
+
+/* Enpoint and interface numbers reverse mapping ****************************/
+
+static int ffs_func_revmap_ep(struct ffs_function *func, u8 num)
+{
+	num = func->eps_revmap[num & USB_ENDPOINT_NUMBER_MASK];
+	return num ? num : -EDOM;
+}
+
+static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf)
+{
+	short *nums = func->interfaces_nums;
+	unsigned count = func->ffs->interfaces_count;
+
+	for (; count; --count, ++nums) {
+		if (*nums >= 0 && *nums == intf)
+			return nums - func->interfaces_nums;
+	}
+
+	return -EDOM;
+}
+
+
+/* Misc helper functions ****************************************************/
+
+static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
+{
+	return nonblock
+		? likely(mutex_trylock(mutex)) ? 0 : -EAGAIN
+		: mutex_lock_interruptible(mutex);
+}
+
+
+static char *ffs_prepare_buffer(const char * __user buf, size_t len)
+{
+	char *data;
+
+	if (unlikely(!len))
+		return NULL;
+
+	data = kmalloc(len, GFP_KERNEL);
+	if (unlikely(!data))
+		return ERR_PTR(-ENOMEM);
+
+	if (unlikely(__copy_from_user(data, buf, len))) {
+		kfree(data);
+		return ERR_PTR(-EFAULT);
+	}
+
+	FVDBG("Buffer from user space:");
+	ffs_dump_mem("", data, len);
+
+	return data;
+}
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
new file mode 100644
index 00000000000..1e00ff9866a
--- /dev/null
+++ b/drivers/usb/gadget/f_hid.c
@@ -0,0 +1,673 @@
+/*
+ * f_hid.c -- USB HID function driver
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/module.h>
+#include <linux/hid.h>
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+#include <linux/usb/g_hid.h>
+
+static int major, minors;
+static struct class *hidg_class;
+
+/*-------------------------------------------------------------------------*/
+/*                            HID gadget struct                            */
+
+struct f_hidg {
+	/* configuration */
+	unsigned char			bInterfaceSubClass;
+	unsigned char			bInterfaceProtocol;
+	unsigned short			report_desc_length;
+	char				*report_desc;
+	unsigned short			report_length;
+
+	/* recv report */
+	char				*set_report_buff;
+	unsigned short			set_report_length;
+	spinlock_t			spinlock;
+	wait_queue_head_t		read_queue;
+
+	/* send report */
+	struct mutex			lock;
+	bool				write_pending;
+	wait_queue_head_t		write_queue;
+	struct usb_request		*req;
+
+	int				minor;
+	struct cdev			cdev;
+	struct usb_function		func;
+	struct usb_ep			*in_ep;
+	struct usb_endpoint_descriptor	*fs_in_ep_desc;
+	struct usb_endpoint_descriptor	*hs_in_ep_desc;
+};
+
+static inline struct f_hidg *func_to_hidg(struct usb_function *f)
+{
+	return container_of(f, struct f_hidg, func);
+}
+
+/*-------------------------------------------------------------------------*/
+/*                           Static descriptors                            */
+
+static struct usb_interface_descriptor hidg_interface_desc = {
+	.bLength		= sizeof hidg_interface_desc,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	/* .bInterfaceNumber	= DYNAMIC */
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 1,
+	.bInterfaceClass	= USB_CLASS_HID,
+	/* .bInterfaceSubClass	= DYNAMIC */
+	/* .bInterfaceProtocol	= DYNAMIC */
+	/* .iInterface		= DYNAMIC */
+};
+
+static struct hid_descriptor hidg_desc = {
+	.bLength			= sizeof hidg_desc,
+	.bDescriptorType		= HID_DT_HID,
+	.bcdHID				= 0x0101,
+	.bCountryCode			= 0x00,
+	.bNumDescriptors		= 0x1,
+	/*.desc[0].bDescriptorType	= DYNAMIC */
+	/*.desc[0].wDescriptorLenght	= DYNAMIC */
+};
+
+/* High-Speed Support */
+
+static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 4, /* FIXME: Add this field in the
+				      * HID gadget configuration?
+				      * (struct hidg_func_descriptor)
+				      */
+};
+
+static struct usb_descriptor_header *hidg_hs_descriptors[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_hs_in_ep_desc,
+	NULL,
+};
+
+/* Full-Speed Support */
+
+static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	/*.wMaxPacketSize	= DYNAMIC */
+	.bInterval		= 10, /* FIXME: Add this field in the
+				       * HID gadget configuration?
+				       * (struct hidg_func_descriptor)
+				       */
+};
+
+static struct usb_descriptor_header *hidg_fs_descriptors[] = {
+	(struct usb_descriptor_header *)&hidg_interface_desc,
+	(struct usb_descriptor_header *)&hidg_desc,
+	(struct usb_descriptor_header *)&hidg_fs_in_ep_desc,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+/*                              Char Device                                */
+
+static ssize_t f_hidg_read(struct file *file, char __user *buffer,
+			size_t count, loff_t *ptr)
+{
+	struct f_hidg	*hidg     = (struct f_hidg *)file->private_data;
+	char		*tmp_buff = NULL;
+	unsigned long	flags;
+
+	if (!count)
+		return 0;
+
+	if (!access_ok(VERIFY_WRITE, buffer, count))
+		return -EFAULT;
+
+	spin_lock_irqsave(&hidg->spinlock, flags);
+
+#define READ_COND (hidg->set_report_buff != NULL)
+
+	while (!READ_COND) {
+		spin_unlock_irqrestore(&hidg->spinlock, flags);
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible(hidg->read_queue, READ_COND))
+			return -ERESTARTSYS;
+
+		spin_lock_irqsave(&hidg->spinlock, flags);
+	}
+
+
+	count = min_t(unsigned, count, hidg->set_report_length);
+	tmp_buff = hidg->set_report_buff;
+	hidg->set_report_buff = NULL;
+
+	spin_unlock_irqrestore(&hidg->spinlock, flags);
+
+	if (tmp_buff != NULL) {
+		/* copy to user outside spinlock */
+		count -= copy_to_user(buffer, tmp_buff, count);
+		kfree(tmp_buff);
+	} else
+		count = -ENOMEM;
+
+	return count;
+}
+
+static void f_hidg_req_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *)ep->driver_data;
+
+	if (req->status != 0) {
+		ERROR(hidg->func.config->cdev,
+			"End Point Request ERROR: %d\n", req->status);
+	}
+
+	hidg->write_pending = 0;
+	wake_up(&hidg->write_queue);
+}
+
+static ssize_t f_hidg_write(struct file *file, const char __user *buffer,
+			    size_t count, loff_t *offp)
+{
+	struct f_hidg *hidg  = (struct f_hidg *)file->private_data;
+	ssize_t status = -ENOMEM;
+
+	if (!access_ok(VERIFY_READ, buffer, count))
+		return -EFAULT;
+
+	mutex_lock(&hidg->lock);
+
+#define WRITE_COND (!hidg->write_pending)
+
+	/* write queue */
+	while (!WRITE_COND) {
+		mutex_unlock(&hidg->lock);
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible_exclusive(
+				hidg->write_queue, WRITE_COND))
+			return -ERESTARTSYS;
+
+		mutex_lock(&hidg->lock);
+	}
+
+	count  = min_t(unsigned, count, hidg->report_length);
+	status = copy_from_user(hidg->req->buf, buffer, count);
+
+	if (status != 0) {
+		ERROR(hidg->func.config->cdev,
+			"copy_from_user error\n");
+		mutex_unlock(&hidg->lock);
+		return -EINVAL;
+	}
+
+	hidg->req->status   = 0;
+	hidg->req->zero     = 0;
+	hidg->req->length   = count;
+	hidg->req->complete = f_hidg_req_complete;
+	hidg->req->context  = hidg;
+	hidg->write_pending = 1;
+
+	status = usb_ep_queue(hidg->in_ep, hidg->req, GFP_ATOMIC);
+	if (status < 0) {
+		ERROR(hidg->func.config->cdev,
+			"usb_ep_queue error on int endpoint %zd\n", status);
+		hidg->write_pending = 0;
+		wake_up(&hidg->write_queue);
+	} else {
+		status = count;
+	}
+
+	mutex_unlock(&hidg->lock);
+
+	return status;
+}
+
+static unsigned int f_hidg_poll(struct file *file, poll_table *wait)
+{
+	struct f_hidg	*hidg  = (struct f_hidg *)file->private_data;
+	unsigned int	ret = 0;
+
+	poll_wait(file, &hidg->read_queue, wait);
+	poll_wait(file, &hidg->write_queue, wait);
+
+	if (WRITE_COND)
+		ret |= POLLOUT | POLLWRNORM;
+
+	if (READ_COND)
+		ret |= POLLIN | POLLRDNORM;
+
+	return ret;
+}
+
+#undef WRITE_COND
+#undef READ_COND
+
+static int f_hidg_release(struct inode *inode, struct file *fd)
+{
+	fd->private_data = NULL;
+	return 0;
+}
+
+static int f_hidg_open(struct inode *inode, struct file *fd)
+{
+	struct f_hidg *hidg =
+		container_of(inode->i_cdev, struct f_hidg, cdev);
+
+	fd->private_data = hidg;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+/*                                usb_function                             */
+
+static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_hidg *hidg = (struct f_hidg *)req->context;
+
+	if (req->status != 0 || req->buf == NULL || req->actual == 0) {
+		ERROR(hidg->func.config->cdev, "%s FAILED\n", __func__);
+		return;
+	}
+
+	spin_lock(&hidg->spinlock);
+
+	hidg->set_report_buff = krealloc(hidg->set_report_buff,
+					 req->actual, GFP_ATOMIC);
+
+	if (hidg->set_report_buff == NULL) {
+		spin_unlock(&hidg->spinlock);
+		return;
+	}
+	hidg->set_report_length = req->actual;
+	memcpy(hidg->set_report_buff, req->buf, req->actual);
+
+	spin_unlock(&hidg->spinlock);
+
+	wake_up(&hidg->read_queue);
+
+	return;
+}
+
+static int hidg_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct f_hidg			*hidg = func_to_hidg(f);
+	struct usb_composite_dev	*cdev = f->config->cdev;
+	struct usb_request		*req  = cdev->req;
+	int status = 0;
+	__u16 value, length;
+
+	value	= __le16_to_cpu(ctrl->wValue);
+	length	= __le16_to_cpu(ctrl->wLength);
+
+	VDBG(cdev, "hid_setup crtl_request : bRequestType:0x%x bRequest:0x%x "
+		"Value:0x%x\n", ctrl->bRequestType, ctrl->bRequest, value);
+
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_GET_REPORT):
+		VDBG(cdev, "get_report\n");
+
+		/* send an empty report */
+		length = min_t(unsigned, length, hidg->report_length);
+		memset(req->buf, 0x0, length);
+
+		goto respond;
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_GET_PROTOCOL):
+		VDBG(cdev, "get_protocol\n");
+		goto stall;
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_SET_REPORT):
+		VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength);
+		req->context  = hidg;
+		req->complete = hidg_set_report_complete;
+		goto respond;
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+		  | HID_REQ_SET_PROTOCOL):
+		VDBG(cdev, "set_protocol\n");
+		goto stall;
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8
+		  | USB_REQ_GET_DESCRIPTOR):
+		switch (value >> 8) {
+		case HID_DT_REPORT:
+			VDBG(cdev, "USB_REQ_GET_DESCRIPTOR: REPORT\n");
+			length = min_t(unsigned short, length,
+						   hidg->report_desc_length);
+			memcpy(req->buf, hidg->report_desc, length);
+			goto respond;
+			break;
+
+		default:
+			VDBG(cdev, "Unknown decriptor request 0x%x\n",
+				 value >> 8);
+			goto stall;
+			break;
+		}
+		break;
+
+	default:
+		VDBG(cdev, "Unknown request 0x%x\n",
+			 ctrl->bRequest);
+		goto stall;
+		break;
+	}
+
+stall:
+	return -EOPNOTSUPP;
+
+respond:
+	req->zero = 0;
+	req->length = length;
+	status = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+	if (status < 0)
+		ERROR(cdev, "usb_ep_queue error on ep0 %d\n", value);
+	return status;
+}
+
+static void hidg_disable(struct usb_function *f)
+{
+	struct f_hidg *hidg = func_to_hidg(f);
+
+	usb_ep_disable(hidg->in_ep);
+	hidg->in_ep->driver_data = NULL;
+
+	return;
+}
+
+static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct usb_composite_dev		*cdev = f->config->cdev;
+	struct f_hidg				*hidg = func_to_hidg(f);
+	const struct usb_endpoint_descriptor	*ep_desc;
+	int status = 0;
+
+	VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
+
+	if (hidg->in_ep != NULL) {
+		/* restart endpoint */
+		if (hidg->in_ep->driver_data != NULL)
+			usb_ep_disable(hidg->in_ep);
+
+		ep_desc = ep_choose(f->config->cdev->gadget,
+				hidg->hs_in_ep_desc, hidg->fs_in_ep_desc);
+		status = usb_ep_enable(hidg->in_ep, ep_desc);
+		if (status < 0) {
+			ERROR(cdev, "Enable endpoint FAILED!\n");
+			goto fail;
+		}
+		hidg->in_ep->driver_data = hidg;
+	}
+fail:
+	return status;
+}
+
+const struct file_operations f_hidg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= f_hidg_open,
+	.release	= f_hidg_release,
+	.write		= f_hidg_write,
+	.read		= f_hidg_read,
+	.poll		= f_hidg_poll,
+};
+
+static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_ep		*ep;
+	struct f_hidg		*hidg = func_to_hidg(f);
+	int			status;
+	dev_t			dev;
+
+	/* allocate instance-specific interface IDs, and patch descriptors */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	hidg_interface_desc.bInterfaceNumber = status;
+
+
+	/* allocate instance-specific endpoints */
+	status = -ENODEV;
+	ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_in_ep_desc);
+	if (!ep)
+		goto fail;
+	ep->driver_data = c->cdev;	/* claim */
+	hidg->in_ep = ep;
+
+	/* preallocate request and buffer */
+	status = -ENOMEM;
+	hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL);
+	if (!hidg->req)
+		goto fail;
+
+
+	hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL);
+	if (!hidg->req->buf)
+		goto fail;
+
+	/* set descriptor dynamic values */
+	hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
+	hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
+	hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
+	hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT;
+	hidg_desc.desc[0].wDescriptorLength =
+		cpu_to_le16(hidg->report_desc_length);
+
+	hidg->set_report_buff = NULL;
+
+	/* copy descriptors */
+	f->descriptors = usb_copy_descriptors(hidg_fs_descriptors);
+	if (!f->descriptors)
+		goto fail;
+
+	hidg->fs_in_ep_desc = usb_find_endpoint(hidg_fs_descriptors,
+						f->descriptors,
+						&hidg_fs_in_ep_desc);
+
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		hidg_hs_in_ep_desc.bEndpointAddress =
+			hidg_fs_in_ep_desc.bEndpointAddress;
+		f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors);
+		if (!f->hs_descriptors)
+			goto fail;
+		hidg->hs_in_ep_desc = usb_find_endpoint(hidg_hs_descriptors,
+							f->hs_descriptors,
+							&hidg_hs_in_ep_desc);
+	} else {
+		hidg->hs_in_ep_desc = NULL;
+	}
+
+	mutex_init(&hidg->lock);
+	spin_lock_init(&hidg->spinlock);
+	init_waitqueue_head(&hidg->write_queue);
+	init_waitqueue_head(&hidg->read_queue);
+
+	/* create char device */
+	cdev_init(&hidg->cdev, &f_hidg_fops);
+	dev = MKDEV(major, hidg->minor);
+	status = cdev_add(&hidg->cdev, dev, 1);
+	if (status)
+		goto fail;
+
+	device_create(hidg_class, NULL, dev, NULL, "%s%d", "hidg", hidg->minor);
+
+	return 0;
+
+fail:
+	ERROR(f->config->cdev, "hidg_bind FAILED\n");
+	if (hidg->req != NULL) {
+		kfree(hidg->req->buf);
+		if (hidg->in_ep != NULL)
+			usb_ep_free_request(hidg->in_ep, hidg->req);
+	}
+
+	usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+
+	return status;
+}
+
+static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_hidg *hidg = func_to_hidg(f);
+
+	device_destroy(hidg_class, MKDEV(major, hidg->minor));
+	cdev_del(&hidg->cdev);
+
+	/* disable/free request and end point */
+	usb_ep_disable(hidg->in_ep);
+	usb_ep_dequeue(hidg->in_ep, hidg->req);
+	kfree(hidg->req->buf);
+	usb_ep_free_request(hidg->in_ep, hidg->req);
+
+	/* free descriptors copies */
+	usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+
+	kfree(hidg->report_desc);
+	kfree(hidg->set_report_buff);
+	kfree(hidg);
+}
+
+/*-------------------------------------------------------------------------*/
+/*                                 Strings                                 */
+
+#define CT_FUNC_HID_IDX	0
+
+static struct usb_string ct_func_string_defs[] = {
+	[CT_FUNC_HID_IDX].s	= "HID Interface",
+	{},			/* end of list */
+};
+
+static struct usb_gadget_strings ct_func_string_table = {
+	.language	= 0x0409,	/* en-US */
+	.strings	= ct_func_string_defs,
+};
+
+static struct usb_gadget_strings *ct_func_strings[] = {
+	&ct_func_string_table,
+	NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+/*                             usb_configuration                           */
+
+int __init hidg_bind_config(struct usb_configuration *c,
+			    struct hidg_func_descriptor *fdesc, int index)
+{
+	struct f_hidg *hidg;
+	int status;
+
+	if (index >= minors)
+		return -ENOENT;
+
+	/* maybe allocate device-global string IDs, and patch descriptors */
+	if (ct_func_string_defs[CT_FUNC_HID_IDX].id == 0) {
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ct_func_string_defs[CT_FUNC_HID_IDX].id = status;
+		hidg_interface_desc.iInterface = status;
+	}
+
+	/* allocate and initialize one new instance */
+	hidg = kzalloc(sizeof *hidg, GFP_KERNEL);
+	if (!hidg)
+		return -ENOMEM;
+
+	hidg->minor = index;
+	hidg->bInterfaceSubClass = fdesc->subclass;
+	hidg->bInterfaceProtocol = fdesc->protocol;
+	hidg->report_length = fdesc->report_length;
+	hidg->report_desc_length = fdesc->report_desc_length;
+	hidg->report_desc = kmemdup(fdesc->report_desc,
+				    fdesc->report_desc_length,
+				    GFP_KERNEL);
+	if (!hidg->report_desc) {
+		kfree(hidg);
+		return -ENOMEM;
+	}
+
+	hidg->func.name    = "hid";
+	hidg->func.strings = ct_func_strings;
+	hidg->func.bind    = hidg_bind;
+	hidg->func.unbind  = hidg_unbind;
+	hidg->func.set_alt = hidg_set_alt;
+	hidg->func.disable = hidg_disable;
+	hidg->func.setup   = hidg_setup;
+
+	status = usb_add_function(c, &hidg->func);
+	if (status)
+		kfree(hidg);
+
+	return status;
+}
+
+int __init ghid_setup(struct usb_gadget *g, int count)
+{
+	int status;
+	dev_t dev;
+
+	hidg_class = class_create(THIS_MODULE, "hidg");
+
+	status = alloc_chrdev_region(&dev, 0, count, "hidg");
+	if (!status) {
+		major = MAJOR(dev);
+		minors = count;
+	}
+
+	return status;
+}
+
+void ghid_cleanup(void)
+{
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
+
+	class_destroy(hidg_class);
+	hidg_class = NULL;
+}
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index f4911c09022..7d05a0be5c6 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -163,6 +163,10 @@
  * ro setting are not allowed when the medium is loaded or if CD-ROM
  * emulation is being used.
  *
+ * When a LUN receive an "eject" SCSI request (Start/Stop Unit),
+ * if the LUN is removable, the backing file is released to simulate
+ * ejection.
+ *
  *
  * This function is heavily based on "File-backed Storage Gadget" by
  * Alan Stern which in turn is heavily based on "Gadget Zero" by David
@@ -302,7 +306,6 @@ static const char fsg_string_interface[] = "Mass Storage";
 
 
 #define FSG_NO_INTR_EP 1
-#define FSG_BUFFHD_STATIC_BUFFER 1
 #define FSG_NO_DEVICE_STRINGS    1
 #define FSG_NO_OTG               1
 #define FSG_NO_INTR_EP           1
@@ -1385,12 +1388,50 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 
 static int do_start_stop(struct fsg_common *common)
 {
-	if (!common->curlun) {
+	struct fsg_lun	*curlun = common->curlun;
+	int		loej, start;
+
+	if (!curlun) {
 		return -EINVAL;
-	} else if (!common->curlun->removable) {
-		common->curlun->sense_data = SS_INVALID_COMMAND;
+	} else if (!curlun->removable) {
+		curlun->sense_data = SS_INVALID_COMMAND;
 		return -EINVAL;
 	}
+
+	loej = common->cmnd[4] & 0x02;
+	start = common->cmnd[4] & 0x01;
+
+	/* eject code from file_storage.c:do_start_stop() */
+
+	if ((common->cmnd[1] & ~0x01) != 0 ||	  /* Mask away Immed */
+		(common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */
+		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+		return -EINVAL;
+	}
+
+	if (!start) {
+		/* Are we allowed to unload the media? */
+		if (curlun->prevent_medium_removal) {
+			LDBG(curlun, "unload attempt prevented\n");
+			curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+			return -EINVAL;
+		}
+		if (loej) {	/* Simulate an unload/eject */
+			up_read(&common->filesem);
+			down_write(&common->filesem);
+			fsg_lun_close(curlun);
+			up_write(&common->filesem);
+			down_read(&common->filesem);
+		}
+	} else {
+
+		/* Our emulation doesn't support mounting; the medium is
+		 * available for use as soon as it is loaded. */
+		if (!fsg_lun_is_open(curlun)) {
+			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+			return -EINVAL;
+		}
+	}
 	return 0;
 }
 
@@ -2701,10 +2742,8 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	/* Maybe allocate device-global string IDs, and patch descriptors */
 	if (fsg_strings[FSG_STRING_INTERFACE].id == 0) {
 		rc = usb_string_id(cdev);
-		if (rc < 0) {
-			kfree(common);
-			return ERR_PTR(rc);
-		}
+		if (unlikely(rc < 0))
+			goto error_release;
 		fsg_strings[FSG_STRING_INTERFACE].id = rc;
 		fsg_intf_desc.iInterface = rc;
 	}
@@ -2712,9 +2751,9 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	/* Create the LUNs, open their backing files, and register the
 	 * LUN devices in sysfs. */
 	curlun = kzalloc(nluns * sizeof *curlun, GFP_KERNEL);
-	if (!curlun) {
-		kfree(common);
-		return ERR_PTR(-ENOMEM);
+	if (unlikely(!curlun)) {
+		rc = -ENOMEM;
+		goto error_release;
 	}
 	common->luns = curlun;
 
@@ -2762,13 +2801,19 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 
 
 	/* Data buffers cyclic list */
-	/* Buffers in buffhds are static -- no need for additional
-	 * allocation. */
 	bh = common->buffhds;
-	i = FSG_NUM_BUFFERS - 1;
+	i = FSG_NUM_BUFFERS;
+	goto buffhds_first_it;
 	do {
 		bh->next = bh + 1;
-	} while (++bh, --i);
+		++bh;
+buffhds_first_it:
+		bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL);
+		if (unlikely(!bh->buf)) {
+			rc = -ENOMEM;
+			goto error_release;
+		}
+	} while (--i);
 	bh->next = common->buffhds;
 
 
@@ -2867,10 +2912,7 @@ error_release:
 
 static void fsg_common_release(struct kref *ref)
 {
-	struct fsg_common *common =
-		container_of(ref, struct fsg_common, ref);
-	unsigned i = common->nluns;
-	struct fsg_lun *lun = common->luns;
+	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
 
 	/* If the thread isn't already dead, tell it to exit now */
 	if (common->state != FSG_STATE_TERMINATED) {
@@ -2881,17 +2923,29 @@ static void fsg_common_release(struct kref *ref)
 		complete(&common->thread_notifier);
 	}
 
-	/* Beware tempting for -> do-while optimization: when in error
-	 * recovery nluns may be zero. */
+	if (likely(common->luns)) {
+		struct fsg_lun *lun = common->luns;
+		unsigned i = common->nluns;
+
+		/* In error recovery common->nluns may be zero. */
+		for (; i; --i, ++lun) {
+			device_remove_file(&lun->dev, &dev_attr_ro);
+			device_remove_file(&lun->dev, &dev_attr_file);
+			fsg_lun_close(lun);
+			device_unregister(&lun->dev);
+		}
+
+		kfree(common->luns);
+	}
 
-	for (; i; --i, ++lun) {
-		device_remove_file(&lun->dev, &dev_attr_ro);
-		device_remove_file(&lun->dev, &dev_attr_file);
-		fsg_lun_close(lun);
-		device_unregister(&lun->dev);
+	{
+		struct fsg_buffhd *bh = common->buffhds;
+		unsigned i = FSG_NUM_BUFFERS;
+		do {
+			kfree(bh->buf);
+		} while (++bh, --i);
 	}
 
-	kfree(common->luns);
 	if (common->free_storage_on_release)
 		kfree(common);
 }
@@ -2906,11 +2960,13 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	DBG(fsg, "unbind\n");
 	fsg_common_put(fsg->common);
+	usb_free_descriptors(fsg->function.descriptors);
+	usb_free_descriptors(fsg->function.hs_descriptors);
 	kfree(fsg);
 }
 
 
-static int __init fsg_bind(struct usb_configuration *c, struct usb_function *f)
+static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
 	struct usb_gadget	*gadget = c->cdev->gadget;
@@ -2946,7 +3002,9 @@ static int __init fsg_bind(struct usb_configuration *c, struct usb_function *f)
 			fsg_fs_bulk_in_desc.bEndpointAddress;
 		fsg_hs_bulk_out_desc.bEndpointAddress =
 			fsg_fs_bulk_out_desc.bEndpointAddress;
-		f->hs_descriptors = fsg_hs_function;
+		f->hs_descriptors = usb_copy_descriptors(fsg_hs_function);
+		if (unlikely(!f->hs_descriptors))
+			return -ENOMEM;
 	}
 
 	return 0;
@@ -2978,7 +3036,11 @@ static int fsg_add(struct usb_composite_dev *cdev,
 
 	fsg->function.name        = FSG_DRIVER_DESC;
 	fsg->function.strings     = fsg_strings_array;
-	fsg->function.descriptors = fsg_fs_function;
+	fsg->function.descriptors = usb_copy_descriptors(fsg_fs_function);
+	if (unlikely(!fsg->function.descriptors)) {
+		rc = -ENOMEM;
+		goto error_free_fsg;
+	}
 	fsg->function.bind        = fsg_bind;
 	fsg->function.unbind      = fsg_unbind;
 	fsg->function.setup       = fsg_setup;
@@ -2993,11 +3055,19 @@ static int fsg_add(struct usb_composite_dev *cdev,
 	 * call to usb_add_function() was successful. */
 
 	rc = usb_add_function(c, &fsg->function);
+	if (unlikely(rc))
+		goto error_free_all;
 
-	if (likely(rc == 0))
-		fsg_common_get(fsg->common);
-	else
-		kfree(fsg);
+	fsg_common_get(fsg->common);
+	return 0;
+
+error_free_all:
+	usb_free_descriptors(fsg->function.descriptors);
+	/* fsg_bind() might have copied those; or maybe not? who cares
+	 * -- free it just in case. */
+	usb_free_descriptors(fsg->function.hs_descriptors);
+error_free_fsg:
+	kfree(fsg);
 
 	return rc;
 }
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 56b022150f2..882484a4039 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -122,7 +122,7 @@ static unsigned int bitrate(struct usb_gadget *g)
 
 /* interface descriptor: */
 
-static struct usb_interface_descriptor rndis_control_intf __initdata = {
+static struct usb_interface_descriptor rndis_control_intf = {
 	.bLength =		sizeof rndis_control_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -135,7 +135,7 @@ static struct usb_interface_descriptor rndis_control_intf __initdata = {
 	/* .iInterface = DYNAMIC */
 };
 
-static struct usb_cdc_header_desc header_desc __initdata = {
+static struct usb_cdc_header_desc header_desc = {
 	.bLength =		sizeof header_desc,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
@@ -143,7 +143,7 @@ static struct usb_cdc_header_desc header_desc __initdata = {
 	.bcdCDC =		cpu_to_le16(0x0110),
 };
 
-static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = {
+static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
 	.bLength =		sizeof call_mgmt_descriptor,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_CALL_MANAGEMENT_TYPE,
@@ -152,7 +152,7 @@ static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = {
 	.bDataInterface =	0x01,
 };
 
-static struct usb_cdc_acm_descriptor rndis_acm_descriptor __initdata = {
+static struct usb_cdc_acm_descriptor rndis_acm_descriptor = {
 	.bLength =		sizeof rndis_acm_descriptor,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_ACM_TYPE,
@@ -160,7 +160,7 @@ static struct usb_cdc_acm_descriptor rndis_acm_descriptor __initdata = {
 	.bmCapabilities =	0x00,
 };
 
-static struct usb_cdc_union_desc rndis_union_desc __initdata = {
+static struct usb_cdc_union_desc rndis_union_desc = {
 	.bLength =		sizeof(rndis_union_desc),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
@@ -170,7 +170,7 @@ static struct usb_cdc_union_desc rndis_union_desc __initdata = {
 
 /* the data interface has two bulk endpoints */
 
-static struct usb_interface_descriptor rndis_data_intf __initdata = {
+static struct usb_interface_descriptor rndis_data_intf = {
 	.bLength =		sizeof rndis_data_intf,
 	.bDescriptorType =	USB_DT_INTERFACE,
 
@@ -198,7 +198,7 @@ rndis_iad_descriptor = {
 
 /* full speed support: */
 
-static struct usb_endpoint_descriptor fs_notify_desc __initdata = {
+static struct usb_endpoint_descriptor fs_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -208,7 +208,7 @@ static struct usb_endpoint_descriptor fs_notify_desc __initdata = {
 	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
 };
 
-static struct usb_endpoint_descriptor fs_in_desc __initdata = {
+static struct usb_endpoint_descriptor fs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -216,7 +216,7 @@ static struct usb_endpoint_descriptor fs_in_desc __initdata = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_endpoint_descriptor fs_out_desc __initdata = {
+static struct usb_endpoint_descriptor fs_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -224,7 +224,7 @@ static struct usb_endpoint_descriptor fs_out_desc __initdata = {
 	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
 };
 
-static struct usb_descriptor_header *eth_fs_function[] __initdata = {
+static struct usb_descriptor_header *eth_fs_function[] = {
 	(struct usb_descriptor_header *) &rndis_iad_descriptor,
 	/* control interface matches ACM, not Ethernet */
 	(struct usb_descriptor_header *) &rndis_control_intf,
@@ -242,7 +242,7 @@ static struct usb_descriptor_header *eth_fs_function[] __initdata = {
 
 /* high speed support: */
 
-static struct usb_endpoint_descriptor hs_notify_desc __initdata = {
+static struct usb_endpoint_descriptor hs_notify_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -251,7 +251,7 @@ static struct usb_endpoint_descriptor hs_notify_desc __initdata = {
 	.wMaxPacketSize =	cpu_to_le16(STATUS_BYTECOUNT),
 	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
 };
-static struct usb_endpoint_descriptor hs_in_desc __initdata = {
+static struct usb_endpoint_descriptor hs_in_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -260,7 +260,7 @@ static struct usb_endpoint_descriptor hs_in_desc __initdata = {
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_endpoint_descriptor hs_out_desc __initdata = {
+static struct usb_endpoint_descriptor hs_out_desc = {
 	.bLength =		USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType =	USB_DT_ENDPOINT,
 
@@ -269,7 +269,7 @@ static struct usb_endpoint_descriptor hs_out_desc __initdata = {
 	.wMaxPacketSize =	cpu_to_le16(512),
 };
 
-static struct usb_descriptor_header *eth_hs_function[] __initdata = {
+static struct usb_descriptor_header *eth_hs_function[] = {
 	(struct usb_descriptor_header *) &rndis_iad_descriptor,
 	/* control interface matches ACM, not Ethernet */
 	(struct usb_descriptor_header *) &rndis_control_intf,
@@ -594,7 +594,7 @@ static void rndis_close(struct gether *geth)
 
 /* ethernet function driver setup/binding */
 
-static int __init
+static int
 rndis_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
@@ -786,7 +786,8 @@ static inline bool can_support_rndis(struct usb_configuration *c)
  * Caller must have called @gether_setup().  Caller is also responsible
  * for calling @gether_cleanup() before module unload.
  */
-int __init rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+int
+rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
 {
 	struct f_rndis	*rndis;
 	int		status;
diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c
new file mode 100644
index 00000000000..fc2611f8b32
--- /dev/null
+++ b/drivers/usb/gadget/f_uvc.c
@@ -0,0 +1,661 @@
+/*
+ *	uvc_gadget.c  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/video.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-event.h>
+
+#include "uvc.h"
+
+unsigned int uvc_trace_param;
+
+/* --------------------------------------------------------------------------
+ * Function descriptors
+ */
+
+/* string IDs are assigned dynamically */
+
+#define UVC_STRING_ASSOCIATION_IDX		0
+#define UVC_STRING_CONTROL_IDX			1
+#define UVC_STRING_STREAMING_IDX		2
+
+static struct usb_string uvc_en_us_strings[] = {
+	[UVC_STRING_ASSOCIATION_IDX].s = "UVC Camera",
+	[UVC_STRING_CONTROL_IDX].s = "Video Control",
+	[UVC_STRING_STREAMING_IDX].s = "Video Streaming",
+	{  }
+};
+
+static struct usb_gadget_strings uvc_stringtab = {
+	.language = 0x0409,	/* en-us */
+	.strings = uvc_en_us_strings,
+};
+
+static struct usb_gadget_strings *uvc_function_strings[] = {
+	&uvc_stringtab,
+	NULL,
+};
+
+#define UVC_INTF_VIDEO_CONTROL			0
+#define UVC_INTF_VIDEO_STREAMING		1
+
+static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
+	.bLength		= USB_DT_INTERFACE_ASSOCIATION_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE_ASSOCIATION,
+	.bFirstInterface	= 0,
+	.bInterfaceCount	= 2,
+	.bFunctionClass		= USB_CLASS_VIDEO,
+	.bFunctionSubClass	= 0x03,
+	.bFunctionProtocol	= 0x00,
+	.iFunction		= 0,
+};
+
+static struct usb_interface_descriptor uvc_control_intf __initdata = {
+	.bLength		= USB_DT_INTERFACE_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= UVC_INTF_VIDEO_CONTROL,
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 1,
+	.bInterfaceClass	= USB_CLASS_VIDEO,
+	.bInterfaceSubClass	= 0x01,
+	.bInterfaceProtocol	= 0x00,
+	.iInterface		= 0,
+};
+
+static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize		= cpu_to_le16(16),
+	.bInterval		= 8,
+};
+
+static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = {
+	.bLength		= UVC_DT_CONTROL_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_CS_ENDPOINT,
+	.bDescriptorSubType	= UVC_EP_INTERRUPT,
+	.wMaxTransferSize	= cpu_to_le16(16),
+};
+
+static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
+	.bLength		= USB_DT_INTERFACE_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= UVC_INTF_VIDEO_STREAMING,
+	.bAlternateSetting	= 0,
+	.bNumEndpoints		= 0,
+	.bInterfaceClass	= USB_CLASS_VIDEO,
+	.bInterfaceSubClass	= 0x02,
+	.bInterfaceProtocol	= 0x00,
+	.iInterface		= 0,
+};
+
+static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
+	.bLength		= USB_DT_INTERFACE_SIZE,
+	.bDescriptorType	= USB_DT_INTERFACE,
+	.bInterfaceNumber	= UVC_INTF_VIDEO_STREAMING,
+	.bAlternateSetting	= 1,
+	.bNumEndpoints		= 1,
+	.bInterfaceClass	= USB_CLASS_VIDEO,
+	.bInterfaceSubClass	= 0x02,
+	.bInterfaceProtocol	= 0x00,
+	.iInterface		= 0,
+};
+
+static struct usb_endpoint_descriptor uvc_streaming_ep = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_IN,
+	.bmAttributes		= USB_ENDPOINT_XFER_ISOC,
+	.wMaxPacketSize		= cpu_to_le16(512),
+	.bInterval		= 1,
+};
+
+static const struct usb_descriptor_header * const uvc_fs_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_streaming_ep,
+	NULL,
+};
+
+static const struct usb_descriptor_header * const uvc_hs_streaming[] = {
+	(struct usb_descriptor_header *) &uvc_streaming_intf_alt1,
+	(struct usb_descriptor_header *) &uvc_streaming_ep,
+	NULL,
+};
+
+/* --------------------------------------------------------------------------
+ * Control requests
+ */
+
+static void
+uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct uvc_device *uvc = req->context;
+	struct v4l2_event v4l2_event;
+	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+
+	if (uvc->event_setup_out) {
+		uvc->event_setup_out = 0;
+
+		memset(&v4l2_event, 0, sizeof(v4l2_event));
+		v4l2_event.type = UVC_EVENT_DATA;
+		uvc_event->data.length = req->actual;
+		memcpy(&uvc_event->data.data, req->buf, req->actual);
+		v4l2_event_queue(uvc->vdev, &v4l2_event);
+	}
+}
+
+static int
+uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct v4l2_event v4l2_event;
+	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+
+	/* printk(KERN_INFO "setup request %02x %02x value %04x index %04x %04x\n",
+	 *	ctrl->bRequestType, ctrl->bRequest, le16_to_cpu(ctrl->wValue),
+	 *	le16_to_cpu(ctrl->wIndex), le16_to_cpu(ctrl->wLength));
+	 */
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) {
+		INFO(f->config->cdev, "invalid request type\n");
+		return -EINVAL;
+	}
+
+	/* Stall too big requests. */
+	if (le16_to_cpu(ctrl->wLength) > UVC_MAX_REQUEST_SIZE)
+		return -EINVAL;
+
+	memset(&v4l2_event, 0, sizeof(v4l2_event));
+	v4l2_event.type = UVC_EVENT_SETUP;
+	memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
+	v4l2_event_queue(uvc->vdev, &v4l2_event);
+
+	return 0;
+}
+
+static int
+uvc_function_get_alt(struct usb_function *f, unsigned interface)
+{
+	struct uvc_device *uvc = to_uvc(f);
+
+	INFO(f->config->cdev, "uvc_function_get_alt(%u)\n", interface);
+
+	if (interface == uvc->control_intf)
+		return 0;
+	else if (interface != uvc->streaming_intf)
+		return -EINVAL;
+	else
+		return uvc->state == UVC_STATE_STREAMING ? 1 : 0;
+}
+
+static int
+uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct v4l2_event v4l2_event;
+	struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
+
+	INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
+
+	if (interface == uvc->control_intf) {
+		if (alt)
+			return -EINVAL;
+
+		if (uvc->state == UVC_STATE_DISCONNECTED) {
+			memset(&v4l2_event, 0, sizeof(v4l2_event));
+			v4l2_event.type = UVC_EVENT_CONNECT;
+			uvc_event->speed = f->config->cdev->gadget->speed;
+			v4l2_event_queue(uvc->vdev, &v4l2_event);
+
+			uvc->state = UVC_STATE_CONNECTED;
+		}
+
+		return 0;
+	}
+
+	if (interface != uvc->streaming_intf)
+		return -EINVAL;
+
+	/* TODO
+	if (usb_endpoint_xfer_bulk(&uvc->desc.vs_ep))
+		return alt ? -EINVAL : 0;
+	*/
+
+	switch (alt) {
+	case 0:
+		if (uvc->state != UVC_STATE_STREAMING)
+			return 0;
+
+		if (uvc->video.ep)
+			usb_ep_disable(uvc->video.ep);
+
+		memset(&v4l2_event, 0, sizeof(v4l2_event));
+		v4l2_event.type = UVC_EVENT_STREAMOFF;
+		v4l2_event_queue(uvc->vdev, &v4l2_event);
+
+		uvc->state = UVC_STATE_CONNECTED;
+		break;
+
+	case 1:
+		if (uvc->state != UVC_STATE_CONNECTED)
+			return 0;
+
+		if (uvc->video.ep)
+			usb_ep_enable(uvc->video.ep, &uvc_streaming_ep);
+
+		memset(&v4l2_event, 0, sizeof(v4l2_event));
+		v4l2_event.type = UVC_EVENT_STREAMON;
+		v4l2_event_queue(uvc->vdev, &v4l2_event);
+
+		uvc->state = UVC_STATE_STREAMING;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void
+uvc_function_disable(struct usb_function *f)
+{
+	struct uvc_device *uvc = to_uvc(f);
+	struct v4l2_event v4l2_event;
+
+	INFO(f->config->cdev, "uvc_function_disable\n");
+
+	memset(&v4l2_event, 0, sizeof(v4l2_event));
+	v4l2_event.type = UVC_EVENT_DISCONNECT;
+	v4l2_event_queue(uvc->vdev, &v4l2_event);
+
+	uvc->state = UVC_STATE_DISCONNECTED;
+}
+
+/* --------------------------------------------------------------------------
+ * Connection / disconnection
+ */
+
+void
+uvc_function_connect(struct uvc_device *uvc)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	int ret;
+
+	if ((ret = usb_function_activate(&uvc->func)) < 0)
+		INFO(cdev, "UVC connect failed with %d\n", ret);
+}
+
+void
+uvc_function_disconnect(struct uvc_device *uvc)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	int ret;
+
+	if ((ret = usb_function_deactivate(&uvc->func)) < 0)
+		INFO(cdev, "UVC disconnect failed with %d\n", ret);
+}
+
+/* --------------------------------------------------------------------------
+ * USB probe and disconnect
+ */
+
+static int
+uvc_register_video(struct uvc_device *uvc)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	struct video_device *video;
+
+	/* TODO reference counting. */
+	video = video_device_alloc();
+	if (video == NULL)
+		return -ENOMEM;
+
+	video->parent = &cdev->gadget->dev;
+	video->minor = -1;
+	video->fops = &uvc_v4l2_fops;
+	video->release = video_device_release;
+	strncpy(video->name, cdev->gadget->name, sizeof(video->name));
+
+	uvc->vdev = video;
+	video_set_drvdata(video, uvc);
+
+	return video_register_device(video, VFL_TYPE_GRABBER, -1);
+}
+
+#define UVC_COPY_DESCRIPTOR(mem, dst, desc) \
+	do { \
+		memcpy(mem, desc, (desc)->bLength); \
+		*(dst)++ = mem; \
+		mem += (desc)->bLength; \
+	} while (0);
+
+#define UVC_COPY_DESCRIPTORS(mem, dst, src) \
+	do { \
+		const struct usb_descriptor_header * const *__src; \
+		for (__src = src; *__src; ++__src) { \
+			memcpy(mem, *__src, (*__src)->bLength); \
+			*dst++ = mem; \
+			mem += (*__src)->bLength; \
+		} \
+	} while (0)
+
+static struct usb_descriptor_header ** __init
+uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
+{
+	struct uvc_input_header_descriptor *uvc_streaming_header;
+	struct uvc_header_descriptor *uvc_control_header;
+	const struct uvc_descriptor_header * const *uvc_streaming_cls;
+	const struct usb_descriptor_header * const *uvc_streaming_std;
+	const struct usb_descriptor_header * const *src;
+	struct usb_descriptor_header **dst;
+	struct usb_descriptor_header **hdr;
+	unsigned int control_size;
+	unsigned int streaming_size;
+	unsigned int n_desc;
+	unsigned int bytes;
+	void *mem;
+
+	uvc_streaming_cls = (speed == USB_SPEED_FULL)
+			  ? uvc->desc.fs_streaming : uvc->desc.hs_streaming;
+	uvc_streaming_std = (speed == USB_SPEED_FULL)
+			  ? uvc_fs_streaming : uvc_hs_streaming;
+
+	/* Descriptors layout
+	 *
+	 * uvc_iad
+	 * uvc_control_intf
+	 * Class-specific UVC control descriptors
+	 * uvc_control_ep
+	 * uvc_control_cs_ep
+	 * uvc_streaming_intf_alt0
+	 * Class-specific UVC streaming descriptors
+	 * uvc_{fs|hs}_streaming
+	 */
+
+	/* Count descriptors and compute their size. */
+	control_size = 0;
+	streaming_size = 0;
+	bytes = uvc_iad.bLength + uvc_control_intf.bLength
+	      + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
+	      + uvc_streaming_intf_alt0.bLength;
+	n_desc = 5;
+
+	for (src = (const struct usb_descriptor_header**)uvc->desc.control; *src; ++src) {
+		control_size += (*src)->bLength;
+		bytes += (*src)->bLength;
+		n_desc++;
+	}
+	for (src = (const struct usb_descriptor_header**)uvc_streaming_cls; *src; ++src) {
+		streaming_size += (*src)->bLength;
+		bytes += (*src)->bLength;
+		n_desc++;
+	}
+	for (src = uvc_streaming_std; *src; ++src) {
+		bytes += (*src)->bLength;
+		n_desc++;
+	}
+
+	mem = kmalloc((n_desc + 1) * sizeof(*src) + bytes, GFP_KERNEL);
+	if (mem == NULL)
+		return NULL;
+
+	hdr = mem;
+	dst = mem;
+	mem += (n_desc + 1) * sizeof(*src);
+
+	/* Copy the descriptors. */
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_iad);
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_intf);
+
+	uvc_control_header = mem;
+	UVC_COPY_DESCRIPTORS(mem, dst,
+		(const struct usb_descriptor_header**)uvc->desc.control);
+	uvc_control_header->wTotalLength = cpu_to_le16(control_size);
+	uvc_control_header->bInCollection = 1;
+	uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
+
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_cs_ep);
+	UVC_COPY_DESCRIPTOR(mem, dst, &uvc_streaming_intf_alt0);
+
+	uvc_streaming_header = mem;
+	UVC_COPY_DESCRIPTORS(mem, dst,
+		(const struct usb_descriptor_header**)uvc_streaming_cls);
+	uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size);
+	uvc_streaming_header->bEndpointAddress = uvc_streaming_ep.bEndpointAddress;
+
+	UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std);
+
+	*dst = NULL;
+	return hdr;
+}
+
+static void
+uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct uvc_device *uvc = to_uvc(f);
+
+	INFO(cdev, "uvc_function_unbind\n");
+
+	if (uvc->vdev) {
+		if (uvc->vdev->minor == -1)
+			video_device_release(uvc->vdev);
+		else
+			video_unregister_device(uvc->vdev);
+		uvc->vdev = NULL;
+	}
+
+	if (uvc->control_ep)
+		uvc->control_ep->driver_data = NULL;
+	if (uvc->video.ep)
+		uvc->video.ep->driver_data = NULL;
+
+	if (uvc->control_req) {
+		usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+		kfree(uvc->control_buf);
+	}
+
+	kfree(f->descriptors);
+	kfree(f->hs_descriptors);
+
+	kfree(uvc);
+}
+
+static int __init
+uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct uvc_device *uvc = to_uvc(f);
+	struct usb_ep *ep;
+	int ret = -EINVAL;
+
+	INFO(cdev, "uvc_function_bind\n");
+
+	/* Allocate endpoints. */
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
+	if (!ep) {
+		INFO(cdev, "Unable to allocate control EP\n");
+		goto error;
+	}
+	uvc->control_ep = ep;
+	ep->driver_data = uvc;
+
+	ep = usb_ep_autoconfig(cdev->gadget, &uvc_streaming_ep);
+	if (!ep) {
+		INFO(cdev, "Unable to allocate streaming EP\n");
+		goto error;
+	}
+	uvc->video.ep = ep;
+	ep->driver_data = uvc;
+
+	/* Allocate interface IDs. */
+	if ((ret = usb_interface_id(c, f)) < 0)
+		goto error;
+	uvc_iad.bFirstInterface = ret;
+	uvc_control_intf.bInterfaceNumber = ret;
+	uvc->control_intf = ret;
+
+	if ((ret = usb_interface_id(c, f)) < 0)
+		goto error;
+	uvc_streaming_intf_alt0.bInterfaceNumber = ret;
+	uvc_streaming_intf_alt1.bInterfaceNumber = ret;
+	uvc->streaming_intf = ret;
+
+	/* Copy descriptors. */
+	f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL);
+	f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH);
+
+	/* Preallocate control endpoint request. */
+	uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL);
+	uvc->control_buf = kmalloc(UVC_MAX_REQUEST_SIZE, GFP_KERNEL);
+	if (uvc->control_req == NULL || uvc->control_buf == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	uvc->control_req->buf = uvc->control_buf;
+	uvc->control_req->complete = uvc_function_ep0_complete;
+	uvc->control_req->context = uvc;
+
+	/* Avoid letting this gadget enumerate until the userspace server is
+	 * active.
+	 */
+	if ((ret = usb_function_deactivate(f)) < 0)
+		goto error;
+
+	/* Initialise video. */
+	ret = uvc_video_init(&uvc->video);
+	if (ret < 0)
+		goto error;
+
+	/* Register a V4L2 device. */
+	ret = uvc_register_video(uvc);
+	if (ret < 0) {
+		printk(KERN_INFO "Unable to register video device\n");
+		goto error;
+	}
+
+	return 0;
+
+error:
+	uvc_function_unbind(c, f);
+	return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * USB gadget function
+ */
+
+/**
+ * uvc_bind_config - add a UVC function to a configuration
+ * @c: the configuration to support the UVC instance
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @uvc_setup(). Caller is also responsible for
+ * calling @uvc_cleanup() before module unload.
+ */
+int __init
+uvc_bind_config(struct usb_configuration *c,
+		const struct uvc_descriptor_header * const *control,
+		const struct uvc_descriptor_header * const *fs_streaming,
+		const struct uvc_descriptor_header * const *hs_streaming)
+{
+	struct uvc_device *uvc;
+	int ret = 0;
+
+	/* TODO Check if the USB device controller supports the required
+	 * features.
+	 */
+	if (!gadget_is_dualspeed(c->cdev->gadget))
+		return -EINVAL;
+
+	uvc = kzalloc(sizeof(*uvc), GFP_KERNEL);
+	if (uvc == NULL)
+		return -ENOMEM;
+
+	uvc->state = UVC_STATE_DISCONNECTED;
+
+	/* Validate the descriptors. */
+	if (control == NULL || control[0] == NULL ||
+	    control[0]->bDescriptorSubType != UVC_DT_HEADER)
+		goto error;
+
+	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
+	    fs_streaming[0]->bDescriptorSubType != UVC_DT_INPUT_HEADER)
+		goto error;
+
+	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
+	    hs_streaming[0]->bDescriptorSubType != UVC_DT_INPUT_HEADER)
+		goto error;
+
+	uvc->desc.control = control;
+	uvc->desc.fs_streaming = fs_streaming;
+	uvc->desc.hs_streaming = hs_streaming;
+
+	/* Allocate string descriptor numbers. */
+	if ((ret = usb_string_id(c->cdev)) < 0)
+		goto error;
+	uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret;
+	uvc_iad.iFunction = ret;
+
+	if ((ret = usb_string_id(c->cdev)) < 0)
+		goto error;
+	uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret;
+	uvc_control_intf.iInterface = ret;
+
+	if ((ret = usb_string_id(c->cdev)) < 0)
+		goto error;
+	uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret;
+	uvc_streaming_intf_alt0.iInterface = ret;
+	uvc_streaming_intf_alt1.iInterface = ret;
+
+	/* Register the function. */
+	uvc->func.name = "uvc";
+	uvc->func.strings = uvc_function_strings;
+	uvc->func.bind = uvc_function_bind;
+	uvc->func.unbind = uvc_function_unbind;
+	uvc->func.get_alt = uvc_function_get_alt;
+	uvc->func.set_alt = uvc_function_set_alt;
+	uvc->func.disable = uvc_function_disable;
+	uvc->func.setup = uvc_function_setup;
+
+	ret = usb_add_function(c, &uvc->func);
+	if (ret)
+		kfree(uvc);
+
+	return 0;
+
+error:
+	kfree(uvc);
+	return ret;
+}
+
+module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(trace, "Trace level bitmask");
+
diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h
new file mode 100644
index 00000000000..8a5db7c4fe7
--- /dev/null
+++ b/drivers/usb/gadget/f_uvc.h
@@ -0,0 +1,376 @@
+/*
+ *	f_uvc.h  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#ifndef _F_UVC_H_
+#define _F_UVC_H_
+
+#include <linux/usb/composite.h>
+
+#define USB_CLASS_VIDEO_CONTROL		1
+#define USB_CLASS_VIDEO_STREAMING	2
+
+struct uvc_descriptor_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+} __attribute__ ((packed));
+
+struct uvc_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u16 bcdUVC;
+	__u16 wTotalLength;
+	__u32 dwClockFrequency;
+	__u8  bInCollection;
+	__u8  baInterfaceNr[];
+} __attribute__((__packed__));
+
+#define UVC_HEADER_DESCRIPTOR(n)	uvc_header_descriptor_##n
+
+#define DECLARE_UVC_HEADER_DESCRIPTOR(n) 			\
+struct UVC_HEADER_DESCRIPTOR(n) {				\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u16 bcdUVC;						\
+	__u16 wTotalLength;					\
+	__u32 dwClockFrequency;					\
+	__u8  bInCollection;					\
+	__u8  baInterfaceNr[n];					\
+} __attribute__ ((packed))
+
+struct uvc_input_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  iTerminal;
+} __attribute__((__packed__));
+
+struct uvc_output_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  bSourceID;
+	__u8  iTerminal;
+} __attribute__((__packed__));
+
+struct uvc_camera_terminal_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bTerminalID;
+	__u16 wTerminalType;
+	__u8  bAssocTerminal;
+	__u8  iTerminal;
+	__u16 wObjectiveFocalLengthMin;
+	__u16 wObjectiveFocalLengthMax;
+	__u16 wOcularFocalLength;
+	__u8  bControlSize;
+	__u8  bmControls[3];
+} __attribute__((__packed__));
+
+struct uvc_selector_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  bNrInPins;
+	__u8  baSourceID[0];
+	__u8  iSelector;
+} __attribute__((__packed__));
+
+#define UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
+	uvc_selector_unit_descriptor_##n
+
+#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) 		\
+struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u8  bUnitID;						\
+	__u8  bNrInPins;					\
+	__u8  baSourceID[n];					\
+	__u8  iSelector;					\
+} __attribute__ ((packed))
+
+struct uvc_processing_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  bSourceID;
+	__u16 wMaxMultiplier;
+	__u8  bControlSize;
+	__u8  bmControls[2];
+	__u8  iProcessing;
+} __attribute__((__packed__));
+
+struct uvc_extension_unit_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bUnitID;
+	__u8  guidExtensionCode[16];
+	__u8  bNumControls;
+	__u8  bNrInPins;
+	__u8  baSourceID[0];
+	__u8  bControlSize;
+	__u8  bmControls[0];
+	__u8  iExtension;
+} __attribute__((__packed__));
+
+#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+	uvc_extension_unit_descriptor_##p_##n
+
+#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) 		\
+struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u8  bUnitID;						\
+	__u8  guidExtensionCode[16];				\
+	__u8  bNumControls;					\
+	__u8  bNrInPins;					\
+	__u8  baSourceID[p];					\
+	__u8  bControlSize;					\
+	__u8  bmControls[n];					\
+	__u8  iExtension;					\
+} __attribute__ ((packed))
+
+struct uvc_control_endpoint_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u16 wMaxTransferSize;
+} __attribute__((__packed__));
+
+#define UVC_DT_HEADER				1
+#define UVC_DT_INPUT_TERMINAL			2
+#define UVC_DT_OUTPUT_TERMINAL			3
+#define UVC_DT_SELECTOR_UNIT			4
+#define UVC_DT_PROCESSING_UNIT			5
+#define UVC_DT_EXTENSION_UNIT			6
+
+#define UVC_DT_HEADER_SIZE(n)			(12+(n))
+#define UVC_DT_INPUT_TERMINAL_SIZE		8
+#define UVC_DT_OUTPUT_TERMINAL_SIZE		9
+#define UVC_DT_CAMERA_TERMINAL_SIZE(n)		(15+(n))
+#define UVC_DT_SELECTOR_UNIT_SIZE(n)		(6+(n))
+#define UVC_DT_PROCESSING_UNIT_SIZE(n)		(9+(n))
+#define UVC_DT_EXTENSION_UNIT_SIZE(p,n)		(24+(p)+(n))
+#define UVC_DT_CONTROL_ENDPOINT_SIZE		5
+
+struct uvc_input_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bNumFormats;
+	__u16 wTotalLength;
+	__u8  bEndpointAddress;
+	__u8  bmInfo;
+	__u8  bTerminalLink;
+	__u8  bStillCaptureMethod;
+	__u8  bTriggerSupport;
+	__u8  bTriggerUsage;
+	__u8  bControlSize;
+	__u8  bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+	uvc_input_header_descriptor_##n_##p
+
+#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p)		\
+struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u8  bNumFormats;					\
+	__u16 wTotalLength;					\
+	__u8  bEndpointAddress;					\
+	__u8  bmInfo;						\
+	__u8  bTerminalLink;					\
+	__u8  bStillCaptureMethod;				\
+	__u8  bTriggerSupport;					\
+	__u8  bTriggerUsage;					\
+	__u8  bControlSize;					\
+	__u8  bmaControls[p][n];				\
+} __attribute__ ((packed))
+
+struct uvc_output_header_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bNumFormats;
+	__u16 wTotalLength;
+	__u8  bEndpointAddress;
+	__u8  bTerminalLink;
+	__u8  bControlSize;
+	__u8  bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+	uvc_output_header_descriptor_##n_##p
+
+#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p)		\
+struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) {			\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u8  bNumFormats;					\
+	__u16 wTotalLength;					\
+	__u8  bEndpointAddress;					\
+	__u8  bTerminalLink;					\
+	__u8  bControlSize;					\
+	__u8  bmaControls[p][n];				\
+} __attribute__ ((packed))
+
+struct uvc_format_uncompressed {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFormatIndex;
+	__u8  bNumFrameDescriptors;
+	__u8  guidFormat[16];
+	__u8  bBitsPerPixel;
+	__u8  bDefaultFrameIndex;
+	__u8  bAspectRatioX;
+	__u8  bAspectRatioY;
+	__u8  bmInterfaceFlags;
+	__u8  bCopyProtect;
+} __attribute__((__packed__));
+
+struct uvc_frame_uncompressed {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFrameIndex;
+	__u8  bmCapabilities;
+	__u16 wWidth;
+	__u16 wHeight;
+	__u32 dwMinBitRate;
+	__u32 dwMaxBitRate;
+	__u32 dwMaxVideoFrameBufferSize;
+	__u32 dwDefaultFrameInterval;
+	__u8  bFrameIntervalType;
+	__u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_FRAME_UNCOMPRESSED(n) \
+	uvc_frame_uncompressed_##n
+
+#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) 			\
+struct UVC_FRAME_UNCOMPRESSED(n) {				\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u8  bFrameIndex;					\
+	__u8  bmCapabilities;					\
+	__u16 wWidth;						\
+	__u16 wHeight;						\
+	__u32 dwMinBitRate;					\
+	__u32 dwMaxBitRate;					\
+	__u32 dwMaxVideoFrameBufferSize;			\
+	__u32 dwDefaultFrameInterval;				\
+	__u8  bFrameIntervalType;				\
+	__u32 dwFrameInterval[n];				\
+} __attribute__ ((packed))
+
+struct uvc_format_mjpeg {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFormatIndex;
+	__u8  bNumFrameDescriptors;
+	__u8  bmFlags;
+	__u8  bDefaultFrameIndex;
+	__u8  bAspectRatioX;
+	__u8  bAspectRatioY;
+	__u8  bmInterfaceFlags;
+	__u8  bCopyProtect;
+} __attribute__((__packed__));
+
+struct uvc_frame_mjpeg {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bFrameIndex;
+	__u8  bmCapabilities;
+	__u16 wWidth;
+	__u16 wHeight;
+	__u32 dwMinBitRate;
+	__u32 dwMaxBitRate;
+	__u32 dwMaxVideoFrameBufferSize;
+	__u32 dwDefaultFrameInterval;
+	__u8  bFrameIntervalType;
+	__u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_FRAME_MJPEG(n) \
+	uvc_frame_mjpeg_##n
+
+#define DECLARE_UVC_FRAME_MJPEG(n) 				\
+struct UVC_FRAME_MJPEG(n) {					\
+	__u8  bLength;						\
+	__u8  bDescriptorType;					\
+	__u8  bDescriptorSubType;				\
+	__u8  bFrameIndex;					\
+	__u8  bmCapabilities;					\
+	__u16 wWidth;						\
+	__u16 wHeight;						\
+	__u32 dwMinBitRate;					\
+	__u32 dwMaxBitRate;					\
+	__u32 dwMaxVideoFrameBufferSize;			\
+	__u32 dwDefaultFrameInterval;				\
+	__u8  bFrameIntervalType;				\
+	__u32 dwFrameInterval[n];				\
+} __attribute__ ((packed))
+
+struct uvc_color_matching_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDescriptorSubType;
+	__u8  bColorPrimaries;
+	__u8  bTransferCharacteristics;
+	__u8  bMatrixCoefficients;
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_HEADER			1
+#define UVC_DT_OUTPUT_HEADER			2
+#define UVC_DT_FORMAT_UNCOMPRESSED		4
+#define UVC_DT_FRAME_UNCOMPRESSED		5
+#define UVC_DT_FORMAT_MJPEG			6
+#define UVC_DT_FRAME_MJPEG			7
+#define UVC_DT_COLOR_MATCHING			13
+
+#define UVC_DT_INPUT_HEADER_SIZE(n, p)		(13+(n*p))
+#define UVC_DT_OUTPUT_HEADER_SIZE(n, p)		(9+(n*p))
+#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE		27
+#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n)	(26+4*(n))
+#define UVC_DT_FORMAT_MJPEG_SIZE		11
+#define UVC_DT_FRAME_MJPEG_SIZE(n)		(26+4*(n))
+#define UVC_DT_COLOR_MATCHING_SIZE		6
+
+extern int uvc_bind_config(struct usb_configuration *c,
+			   const struct uvc_descriptor_header * const *control,
+			   const struct uvc_descriptor_header * const *fs_streaming,
+			   const struct uvc_descriptor_header * const *hs_streaming);
+
+#endif /* _F_UVC_H_ */
+
diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 20a802ecaa1..d0b8bde59e5 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -50,12 +50,14 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		goto egusb;
 	}
 
-	freq = clk_get_rate(mxc_usb_clk);
-	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
-	    (freq < 59999000 || freq > 60001000)) {
-		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
-		ret = -EINVAL;
-		goto eclkrate;
+	if (!cpu_is_mx51()) {
+		freq = clk_get_rate(mxc_usb_clk);
+		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
+		    (freq < 59999000 || freq > 60001000)) {
+			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+			ret = -EINVAL;
+			goto eclkrate;
+		}
 	}
 
 	ret = clk_enable(mxc_usb_clk);
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index fa3d142ba64..08a9a62a39e 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -489,7 +489,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	case USB_ENDPOINT_XFER_ISOC:
 		/* Calculate transactions needed for high bandwidth iso */
 		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
-		max = max & 0x8ff;	/* bit 0~10 */
+		max = max & 0x7ff;	/* bit 0~10 */
 		/* 3 transactions at most */
 		if (mult > 3)
 			goto en_done;
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
new file mode 100644
index 00000000000..4b0e4a040d6
--- /dev/null
+++ b/drivers/usb/gadget/g_ffs.c
@@ -0,0 +1,426 @@
+#include <linux/module.h>
+#include <linux/utsname.h>
+
+
+/*
+ * kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS
+#  if defined USB_ETH_RNDIS
+#    undef USB_ETH_RNDIS
+#  endif
+#  ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+#    define USB_ETH_RNDIS y
+#  endif
+
+#  include "f_ecm.c"
+#  include "f_subset.c"
+#  ifdef USB_ETH_RNDIS
+#    include "f_rndis.c"
+#    include "rndis.c"
+#  endif
+#  include "u_ether.c"
+
+static u8 gfs_hostaddr[ETH_ALEN];
+#else
+#  if !defined CONFIG_USB_FUNCTIONFS_GENERIC
+#    define CONFIG_USB_FUNCTIONFS_GENERIC
+#  endif
+#  define gether_cleanup() do { } while (0)
+#  define gether_setup(gadget, hostaddr)   ((int)0)
+#endif
+
+#include "f_fs.c"
+
+
+#define DRIVER_NAME	"g_ffs"
+#define DRIVER_DESC	"USB Function Filesystem"
+#define DRIVER_VERSION	"24 Aug 2004"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Michal Nazarewicz");
+MODULE_LICENSE("GPL");
+
+
+static unsigned short gfs_vendor_id    = 0x0525;	/* XXX NetChip */
+static unsigned short gfs_product_id   = 0xa4ac;	/* XXX */
+
+static struct usb_device_descriptor gfs_dev_desc = {
+	.bLength		= sizeof gfs_dev_desc,
+	.bDescriptorType	= USB_DT_DEVICE,
+
+	.bcdUSB			= cpu_to_le16(0x0200),
+	.bDeviceClass		= USB_CLASS_PER_INTERFACE,
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	/* .idVendor		= cpu_to_le16(gfs_vendor_id), */
+	/* .idProduct		= cpu_to_le16(gfs_product_id), */
+	/* .bcdDevice		= f(hardware) */
+	/* .iManufacturer	= DYNAMIC */
+	/* .iProduct		= DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations	= 1,
+};
+
+#define GFS_MODULE_PARAM_DESC(name, field) \
+	MODULE_PARM_DESC(name, "Value of the " #field " field of the device descriptor sent to the host.  Takes effect only prior to the user-space driver registering to the FunctionFS.")
+
+module_param_named(usb_class,    gfs_dev_desc.bDeviceClass,    byte,   0644);
+GFS_MODULE_PARAM_DESC(usb_class, bDeviceClass);
+module_param_named(usb_subclass, gfs_dev_desc.bDeviceSubClass, byte,   0644);
+GFS_MODULE_PARAM_DESC(usb_subclass, bDeviceSubClass);
+module_param_named(usb_protocol, gfs_dev_desc.bDeviceProtocol, byte,   0644);
+GFS_MODULE_PARAM_DESC(usb_protocol, bDeviceProtocol);
+module_param_named(usb_vendor,   gfs_vendor_id,                ushort, 0644);
+GFS_MODULE_PARAM_DESC(usb_vendor, idVendor);
+module_param_named(usb_product,  gfs_product_id,               ushort, 0644);
+GFS_MODULE_PARAM_DESC(usb_product, idProduct);
+
+
+
+static const struct usb_descriptor_header *gfs_otg_desc[] = {
+	(const struct usb_descriptor_header *)
+	&(const struct usb_otg_descriptor) {
+		.bLength		= sizeof(struct usb_otg_descriptor),
+		.bDescriptorType	= USB_DT_OTG,
+
+		/* REVISIT SRP-only hardware is possible, although
+		 * it would not be called "OTG" ... */
+		.bmAttributes		= USB_OTG_SRP | USB_OTG_HNP,
+	},
+
+	NULL
+};
+
+/* string IDs are assigned dynamically */
+
+enum {
+	GFS_STRING_MANUFACTURER_IDX,
+	GFS_STRING_PRODUCT_IDX,
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	GFS_STRING_RNDIS_CONFIG_IDX,
+#endif
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	GFS_STRING_ECM_CONFIG_IDX,
+#endif
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	GFS_STRING_GENERIC_CONFIG_IDX,
+#endif
+};
+
+static       char gfs_manufacturer[50];
+static const char gfs_driver_desc[] = DRIVER_DESC;
+static const char gfs_short_name[]  = DRIVER_NAME;
+
+static struct usb_string gfs_strings[] = {
+	[GFS_STRING_MANUFACTURER_IDX].s = gfs_manufacturer,
+	[GFS_STRING_PRODUCT_IDX].s = gfs_driver_desc,
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	[GFS_STRING_RNDIS_CONFIG_IDX].s = "FunctionFS + RNDIS",
+#endif
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	[GFS_STRING_ECM_CONFIG_IDX].s = "FunctionFS + ECM",
+#endif
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	[GFS_STRING_GENERIC_CONFIG_IDX].s = "FunctionFS",
+#endif
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings *gfs_dev_strings[] = {
+	&(struct usb_gadget_strings) {
+		.language	= 0x0409,	/* en-us */
+		.strings	= gfs_strings,
+	},
+	NULL,
+};
+
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+static int gfs_do_rndis_config(struct usb_configuration *c);
+
+static struct usb_configuration gfs_rndis_config_driver = {
+	.label			= "FunctionFS + RNDIS",
+	.bind			= gfs_do_rndis_config,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration	= DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+#  define gfs_add_rndis_config(cdev) \
+	usb_add_config(cdev, &gfs_rndis_config_driver)
+#else
+#  define gfs_add_rndis_config(cdev) 0
+#endif
+
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+static int gfs_do_ecm_config(struct usb_configuration *c);
+
+static struct usb_configuration gfs_ecm_config_driver = {
+	.label			= "FunctionFS + ECM",
+	.bind			= gfs_do_ecm_config,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration	= DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+#  define gfs_add_ecm_config(cdev) \
+	usb_add_config(cdev, &gfs_ecm_config_driver)
+#else
+#  define gfs_add_ecm_config(cdev) 0
+#endif
+
+
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+static int gfs_do_generic_config(struct usb_configuration *c);
+
+static struct usb_configuration gfs_generic_config_driver = {
+	.label			= "FunctionFS",
+	.bind			= gfs_do_generic_config,
+	.bConfigurationValue	= 2,
+	/* .iConfiguration	= DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+#  define gfs_add_generic_config(cdev) \
+	usb_add_config(cdev, &gfs_generic_config_driver)
+#else
+#  define gfs_add_generic_config(cdev) 0
+#endif
+
+
+static int gfs_bind(struct usb_composite_dev *cdev);
+static int gfs_unbind(struct usb_composite_dev *cdev);
+
+static struct usb_composite_driver gfs_driver = {
+	.name		= gfs_short_name,
+	.dev		= &gfs_dev_desc,
+	.strings	= gfs_dev_strings,
+	.bind		= gfs_bind,
+	.unbind		= gfs_unbind,
+};
+
+
+static struct ffs_data *gfs_ffs_data;
+static unsigned long gfs_registered;
+
+
+static int  gfs_init(void)
+{
+	ENTER();
+
+	return functionfs_init();
+}
+module_init(gfs_init);
+
+static void  gfs_exit(void)
+{
+	ENTER();
+
+	if (test_and_clear_bit(0, &gfs_registered))
+		usb_composite_unregister(&gfs_driver);
+
+	functionfs_cleanup();
+}
+module_exit(gfs_exit);
+
+
+static int functionfs_ready_callback(struct ffs_data *ffs)
+{
+	int ret;
+
+	ENTER();
+
+	if (WARN_ON(test_and_set_bit(0, &gfs_registered)))
+		return -EBUSY;
+
+	gfs_ffs_data = ffs;
+	ret = usb_composite_register(&gfs_driver);
+	if (unlikely(ret < 0))
+		clear_bit(0, &gfs_registered);
+	return ret;
+}
+
+static void functionfs_closed_callback(struct ffs_data *ffs)
+{
+	ENTER();
+
+	if (test_and_clear_bit(0, &gfs_registered))
+		usb_composite_unregister(&gfs_driver);
+}
+
+
+static int functionfs_check_dev_callback(const char *dev_name)
+{
+	return 0;
+}
+
+
+
+static int gfs_bind(struct usb_composite_dev *cdev)
+{
+	int ret;
+
+	ENTER();
+
+	if (WARN_ON(!gfs_ffs_data))
+		return -ENODEV;
+
+	ret = gether_setup(cdev->gadget, gfs_hostaddr);
+	if (unlikely(ret < 0))
+		goto error_quick;
+
+	gfs_dev_desc.idVendor  = cpu_to_le16(gfs_vendor_id);
+	gfs_dev_desc.idProduct = cpu_to_le16(gfs_product_id);
+
+	snprintf(gfs_manufacturer, sizeof gfs_manufacturer, "%s %s with %s",
+		 init_utsname()->sysname, init_utsname()->release,
+		 cdev->gadget->name);
+	ret = usb_string_id(cdev);
+	if (unlikely(ret < 0))
+		goto error;
+	gfs_strings[GFS_STRING_MANUFACTURER_IDX].id = ret;
+	gfs_dev_desc.iManufacturer = ret;
+
+	ret = usb_string_id(cdev);
+	if (unlikely(ret < 0))
+		goto error;
+	gfs_strings[GFS_STRING_PRODUCT_IDX].id = ret;
+	gfs_dev_desc.iProduct = ret;
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+	ret = usb_string_id(cdev);
+	if (unlikely(ret < 0))
+		goto error;
+	gfs_strings[GFS_STRING_RNDIS_CONFIG_IDX].id = ret;
+	gfs_rndis_config_driver.iConfiguration = ret;
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+	ret = usb_string_id(cdev);
+	if (unlikely(ret < 0))
+		goto error;
+	gfs_strings[GFS_STRING_ECM_CONFIG_IDX].id = ret;
+	gfs_ecm_config_driver.iConfiguration = ret;
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+	ret = usb_string_id(cdev);
+	if (unlikely(ret < 0))
+		goto error;
+	gfs_strings[GFS_STRING_GENERIC_CONFIG_IDX].id = ret;
+	gfs_generic_config_driver.iConfiguration = ret;
+#endif
+
+	ret = functionfs_bind(gfs_ffs_data, cdev);
+	if (unlikely(ret < 0))
+		goto error;
+
+	ret = gfs_add_rndis_config(cdev);
+	if (unlikely(ret < 0))
+		goto error_unbind;
+
+	ret = gfs_add_ecm_config(cdev);
+	if (unlikely(ret < 0))
+		goto error_unbind;
+
+	ret = gfs_add_generic_config(cdev);
+	if (unlikely(ret < 0))
+		goto error_unbind;
+
+	return 0;
+
+error_unbind:
+	functionfs_unbind(gfs_ffs_data);
+error:
+	gether_cleanup();
+error_quick:
+	gfs_ffs_data = NULL;
+	return ret;
+}
+
+static int gfs_unbind(struct usb_composite_dev *cdev)
+{
+	ENTER();
+
+	/* We may have been called in an error recovery frem
+	 * composite_bind() after gfs_unbind() failure so we need to
+	 * check if gfs_ffs_data is not NULL since gfs_bind() handles
+	 * all error recovery itself.  I'd rather we werent called
+	 * from composite on orror recovery, but what you're gonna
+	 * do...? */
+
+	if (gfs_ffs_data) {
+		gether_cleanup();
+		functionfs_unbind(gfs_ffs_data);
+		gfs_ffs_data = NULL;
+	}
+
+	return 0;
+}
+
+
+static int __gfs_do_config(struct usb_configuration *c,
+			   int (*eth)(struct usb_configuration *c, u8 *ethaddr),
+			   u8 *ethaddr)
+{
+	int ret;
+
+	if (WARN_ON(!gfs_ffs_data))
+		return -ENODEV;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = gfs_otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	if (eth) {
+		ret = eth(c, ethaddr);
+		if (unlikely(ret < 0))
+			return ret;
+	}
+
+	ret = functionfs_add(c->cdev, c, gfs_ffs_data);
+	if (unlikely(ret < 0))
+		return ret;
+
+	return 0;
+}
+
+#ifdef CONFIG_USB_FUNCTIONFS_RNDIS
+static int gfs_do_rndis_config(struct usb_configuration *c)
+{
+	ENTER();
+
+	return __gfs_do_config(c, rndis_bind_config, gfs_hostaddr);
+}
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_ETH
+static int gfs_do_ecm_config(struct usb_configuration *c)
+{
+	ENTER();
+
+	return __gfs_do_config(c,
+			       can_support_ecm(c->cdev->gadget)
+			     ? ecm_bind_config : geth_bind_config,
+			       gfs_hostaddr);
+}
+#endif
+
+#ifdef CONFIG_USB_FUNCTIONFS_GENERIC
+static int gfs_do_generic_config(struct usb_configuration *c)
+{
+	ENTER();
+
+	return __gfs_do_config(c, NULL, NULL);
+}
+#endif
diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c
new file mode 100644
index 00000000000..775722686ed
--- /dev/null
+++ b/drivers/usb/gadget/hid.c
@@ -0,0 +1,298 @@
+/*
+ * hid.c -- HID Composite driver
+ *
+ * Based on multi.c
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+
+#define DRIVER_DESC		"HID Gadget"
+#define DRIVER_VERSION		"2010/03/16"
+
+/*-------------------------------------------------------------------------*/
+
+#define HIDG_VENDOR_NUM		0x0525	/* XXX NetChip */
+#define HIDG_PRODUCT_NUM	0xa4ac	/* Linux-USB HID gadget */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "f_hid.c"
+
+
+struct hidg_func_node {
+	struct list_head node;
+	struct hidg_func_descriptor *func;
+};
+
+static LIST_HEAD(hidg_func_list);
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		cpu_to_le16(0x0200),
+
+	/* .bDeviceClass =		USB_CLASS_COMM, */
+	/* .bDeviceSubClass =	0, */
+	/* .bDeviceProtocol =	0, */
+	.bDeviceClass =		0xEF,
+	.bDeviceSubClass =	2,
+	.bDeviceProtocol =	1,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id can be overridden by module parameters.  */
+	.idVendor =		cpu_to_le16(HIDG_VENDOR_NUM),
+	.idProduct =		cpu_to_le16(HIDG_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	/* REVISIT SRP-only hardware is possible, although
+	 * it would not be called "OTG" ...
+	 */
+	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
+
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer,
+	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+
+
+/****************************** Configurations ******************************/
+
+static int __init do_config(struct usb_configuration *c)
+{
+	struct hidg_func_node *e;
+	int func = 0, status = 0;
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	list_for_each_entry(e, &hidg_func_list, node) {
+		status = hidg_bind_config(c, e->func, func++);
+		if (status)
+			break;
+	}
+
+	return status;
+}
+
+static struct usb_configuration config_driver = {
+	.label			= "HID Gadget",
+	.bind			= do_config,
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/****************************** Gadget Bind ******************************/
+
+static int __init hid_bind(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	struct list_head *tmp;
+	int status, gcnum, funcs = 0;
+
+	list_for_each(tmp, &hidg_func_list)
+		funcs++;
+
+	if (!funcs)
+		return -ENODEV;
+
+	/* set up HID */
+	status = ghid_setup(cdev->gadget, funcs);
+	if (status < 0)
+		return status;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0)
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+	else
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099);
+
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	/* device descriptor strings: manufacturer, product */
+	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+		init_utsname()->sysname, init_utsname()->release,
+		gadget->name);
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		return status;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
+
+	/* register our configuration */
+	status = usb_add_config(cdev, &config_driver);
+	if (status < 0)
+		return status;
+
+	dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
+
+	return 0;
+}
+
+static int __exit hid_unbind(struct usb_composite_dev *cdev)
+{
+	ghid_cleanup();
+	return 0;
+}
+
+static int __init hidg_plat_driver_probe(struct platform_device *pdev)
+{
+	struct hidg_func_descriptor *func = pdev->dev.platform_data;
+	struct hidg_func_node *entry;
+
+	if (!func) {
+		dev_err(&pdev->dev, "Platform data missing\n");
+		return -ENODEV;
+	}
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->func = func;
+	list_add_tail(&entry->node, &hidg_func_list);
+
+	return 0;
+}
+
+static int __devexit hidg_plat_driver_remove(struct platform_device *pdev)
+{
+	struct hidg_func_node *e, *n;
+
+	list_for_each_entry_safe(e, n, &hidg_func_list, node) {
+		list_del(&e->node);
+		kfree(e);
+	}
+
+	return 0;
+}
+
+
+/****************************** Some noise ******************************/
+
+
+static struct usb_composite_driver hidg_driver = {
+	.name		= "g_hid",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.bind		= hid_bind,
+	.unbind		= __exit_p(hid_unbind),
+};
+
+static struct platform_driver hidg_plat_driver = {
+	.remove		= __devexit_p(hidg_plat_driver_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "hidg",
+	},
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Fabien Chouteau, Peter Korsgaard");
+MODULE_LICENSE("GPL");
+
+static int __init hidg_init(void)
+{
+	int status;
+
+	status = platform_driver_probe(&hidg_plat_driver,
+				hidg_plat_driver_probe);
+	if (status < 0)
+		return status;
+
+	status = usb_composite_register(&hidg_driver);
+	if (status < 0)
+		platform_driver_unregister(&hidg_plat_driver);
+
+	return status;
+}
+module_init(hidg_init);
+
+static void __exit hidg_cleanup(void)
+{
+	platform_driver_unregister(&hidg_plat_driver);
+	usb_composite_unregister(&hidg_driver);
+}
+module_exit(hidg_cleanup);
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index ff61e4866e8..cd16231d8c7 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -360,7 +360,7 @@ struct pxa_ep {
 	 * Specific pxa endpoint data, needed for hardware initialization
 	 */
 	unsigned		dir_in:1;
-	unsigned		addr:3;
+	unsigned		addr:4;
 	unsigned		config:2;
 	unsigned		interface:3;
 	unsigned		alternate:3;
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 07f4178ad17..1da755a1c85 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -715,7 +715,7 @@ static u8 __init nibble(unsigned char c)
 	return 0;
 }
 
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
+static int get_ether_addr(const char *str, u8 *dev_addr)
 {
 	if (str) {
 		unsigned	i;
@@ -764,7 +764,7 @@ static struct device_type gadget_type = {
  *
  * Returns negative errno, or zero on success
  */
-int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
+int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
 {
 	struct eth_dev		*dev;
 	struct net_device	*net;
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
new file mode 100644
index 00000000000..0a705e63c93
--- /dev/null
+++ b/drivers/usb/gadget/uvc.h
@@ -0,0 +1,241 @@
+/*
+ *	uvc_gadget.h  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#ifndef _UVC_GADGET_H_
+#define _UVC_GADGET_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+
+#define UVC_EVENT_FIRST			(V4L2_EVENT_PRIVATE_START + 0)
+#define UVC_EVENT_CONNECT		(V4L2_EVENT_PRIVATE_START + 0)
+#define UVC_EVENT_DISCONNECT		(V4L2_EVENT_PRIVATE_START + 1)
+#define UVC_EVENT_STREAMON		(V4L2_EVENT_PRIVATE_START + 2)
+#define UVC_EVENT_STREAMOFF		(V4L2_EVENT_PRIVATE_START + 3)
+#define UVC_EVENT_SETUP			(V4L2_EVENT_PRIVATE_START + 4)
+#define UVC_EVENT_DATA			(V4L2_EVENT_PRIVATE_START + 5)
+#define UVC_EVENT_LAST			(V4L2_EVENT_PRIVATE_START + 5)
+
+struct uvc_request_data
+{
+	unsigned int length;
+	__u8 data[60];
+};
+
+struct uvc_event
+{
+	union {
+		enum usb_device_speed speed;
+		struct usb_ctrlrequest req;
+		struct uvc_request_data data;
+	};
+};
+
+#define UVCIOC_SEND_RESPONSE		_IOW('U', 1, struct uvc_request_data)
+
+#define UVC_INTF_CONTROL		0
+#define UVC_INTF_STREAMING		1
+
+/* ------------------------------------------------------------------------
+ * UVC constants & structures
+ */
+
+/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
+#define UVC_STREAM_EOH				(1 << 7)
+#define UVC_STREAM_ERR				(1 << 6)
+#define UVC_STREAM_STI				(1 << 5)
+#define UVC_STREAM_RES				(1 << 4)
+#define UVC_STREAM_SCR				(1 << 3)
+#define UVC_STREAM_PTS				(1 << 2)
+#define UVC_STREAM_EOF				(1 << 1)
+#define UVC_STREAM_FID				(1 << 0)
+
+struct uvc_streaming_control {
+	__u16 bmHint;
+	__u8  bFormatIndex;
+	__u8  bFrameIndex;
+	__u32 dwFrameInterval;
+	__u16 wKeyFrameRate;
+	__u16 wPFrameRate;
+	__u16 wCompQuality;
+	__u16 wCompWindowSize;
+	__u16 wDelay;
+	__u32 dwMaxVideoFrameSize;
+	__u32 dwMaxPayloadTransferSize;
+	__u32 dwClockFrequency;
+	__u8  bmFramingInfo;
+	__u8  bPreferedVersion;
+	__u8  bMinVersion;
+	__u8  bMaxVersion;
+} __attribute__((__packed__));
+
+/* ------------------------------------------------------------------------
+ * Debugging, printing and logging
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/usb.h>	/* For usb_endpoint_* */
+#include <linux/usb/gadget.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-fh.h>
+
+#include "uvc_queue.h"
+
+#define UVC_TRACE_PROBE				(1 << 0)
+#define UVC_TRACE_DESCR				(1 << 1)
+#define UVC_TRACE_CONTROL			(1 << 2)
+#define UVC_TRACE_FORMAT			(1 << 3)
+#define UVC_TRACE_CAPTURE			(1 << 4)
+#define UVC_TRACE_CALLS				(1 << 5)
+#define UVC_TRACE_IOCTL				(1 << 6)
+#define UVC_TRACE_FRAME				(1 << 7)
+#define UVC_TRACE_SUSPEND			(1 << 8)
+#define UVC_TRACE_STATUS			(1 << 9)
+
+#define UVC_WARN_MINMAX				0
+#define UVC_WARN_PROBE_DEF			1
+
+extern unsigned int uvc_trace_param;
+
+#define uvc_trace(flag, msg...) \
+	do { \
+		if (uvc_trace_param & flag) \
+			printk(KERN_DEBUG "uvcvideo: " msg); \
+	} while (0)
+
+#define uvc_warn_once(dev, warn, msg...) \
+	do { \
+		if (!test_and_set_bit(warn, &dev->warnings)) \
+			printk(KERN_INFO "uvcvideo: " msg); \
+	} while (0)
+
+#define uvc_printk(level, msg...) \
+	printk(level "uvcvideo: " msg)
+
+/* ------------------------------------------------------------------------
+ * Driver specific constants
+ */
+
+#define DRIVER_VERSION				"0.1.0"
+#define DRIVER_VERSION_NUMBER			KERNEL_VERSION(0, 1, 0)
+
+#define DMA_ADDR_INVALID			(~(dma_addr_t)0)
+
+#define UVC_NUM_REQUESTS			4
+#define UVC_MAX_REQUEST_SIZE			64
+#define UVC_MAX_EVENTS				4
+
+#define USB_DT_INTERFACE_ASSOCIATION_SIZE	8
+#define USB_CLASS_MISC				0xef
+
+/* ------------------------------------------------------------------------
+ * Structures
+ */
+
+struct uvc_video
+{
+	struct usb_ep *ep;
+
+	/* Frame parameters */
+	u8 bpp;
+	u32 fcc;
+	unsigned int width;
+	unsigned int height;
+	unsigned int imagesize;
+
+	/* Requests */
+	unsigned int req_size;
+	struct usb_request *req[UVC_NUM_REQUESTS];
+	__u8 *req_buffer[UVC_NUM_REQUESTS];
+	struct list_head req_free;
+	spinlock_t req_lock;
+
+	void (*encode) (struct usb_request *req, struct uvc_video *video,
+			struct uvc_buffer *buf);
+
+	/* Context data used by the completion handler */
+	__u32 payload_size;
+	__u32 max_payload_size;
+
+	struct uvc_video_queue queue;
+	unsigned int fid;
+};
+
+enum uvc_state
+{
+	UVC_STATE_DISCONNECTED,
+	UVC_STATE_CONNECTED,
+	UVC_STATE_STREAMING,
+};
+
+struct uvc_device
+{
+	struct video_device *vdev;
+	enum uvc_state state;
+	struct usb_function func;
+	struct uvc_video video;
+
+	/* Descriptors */
+	struct {
+		const struct uvc_descriptor_header * const *control;
+		const struct uvc_descriptor_header * const *fs_streaming;
+		const struct uvc_descriptor_header * const *hs_streaming;
+	} desc;
+
+	unsigned int control_intf;
+	struct usb_ep *control_ep;
+	struct usb_request *control_req;
+	void *control_buf;
+
+	unsigned int streaming_intf;
+
+	/* Events */
+	unsigned int event_length;
+	unsigned int event_setup_out : 1;
+};
+
+static inline struct uvc_device *to_uvc(struct usb_function *f)
+{
+	return container_of(f, struct uvc_device, func);
+}
+
+struct uvc_file_handle
+{
+	struct v4l2_fh vfh;
+	struct uvc_video *device;
+};
+
+#define to_uvc_file_handle(handle) \
+	container_of(handle, struct uvc_file_handle, vfh)
+
+extern struct v4l2_file_operations uvc_v4l2_fops;
+
+/* ------------------------------------------------------------------------
+ * Functions
+ */
+
+extern int uvc_video_enable(struct uvc_video *video, int enable);
+extern int uvc_video_init(struct uvc_video *video);
+extern int uvc_video_pump(struct uvc_video *video);
+
+extern void uvc_endpoint_stream(struct uvc_device *dev);
+
+extern void uvc_function_connect(struct uvc_device *uvc);
+extern void uvc_function_disconnect(struct uvc_device *uvc);
+
+#endif /* __KERNEL__ */
+
+#endif /* _UVC_GADGET_H_ */
+
diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c
new file mode 100644
index 00000000000..43891991bf2
--- /dev/null
+++ b/drivers/usb/gadget/uvc_queue.c
@@ -0,0 +1,583 @@
+/*
+ *	uvc_queue.c  --  USB Video Class driver - Buffers management
+ *
+ *	Copyright (C) 2005-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+#include <asm/atomic.h>
+
+#include "uvc.h"
+
+/* ------------------------------------------------------------------------
+ * Video buffers queue management.
+ *
+ * Video queues is initialized by uvc_queue_init(). The function performs
+ * basic initialization of the uvc_video_queue struct and never fails.
+ *
+ * Video buffer allocation and freeing are performed by uvc_alloc_buffers and
+ * uvc_free_buffers respectively. The former acquires the video queue lock,
+ * while the later must be called with the lock held (so that allocation can
+ * free previously allocated buffers). Trying to free buffers that are mapped
+ * to user space will return -EBUSY.
+ *
+ * Video buffers are managed using two queues. However, unlike most USB video
+ * drivers that use an in queue and an out queue, we use a main queue to hold
+ * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to
+ * hold empty buffers. This design (copied from video-buf) minimizes locking
+ * in interrupt, as only one queue is shared between interrupt and user
+ * contexts.
+ *
+ * Use cases
+ * ---------
+ *
+ * Unless stated otherwise, all operations that modify the irq buffers queue
+ * are protected by the irq spinlock.
+ *
+ * 1. The user queues the buffers, starts streaming and dequeues a buffer.
+ *
+ *    The buffers are added to the main and irq queues. Both operations are
+ *    protected by the queue lock, and the later is protected by the irq
+ *    spinlock as well.
+ *
+ *    The completion handler fetches a buffer from the irq queue and fills it
+ *    with video data. If no buffer is available (irq queue empty), the handler
+ *    returns immediately.
+ *
+ *    When the buffer is full, the completion handler removes it from the irq
+ *    queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue.
+ *    At that point, any process waiting on the buffer will be woken up. If a
+ *    process tries to dequeue a buffer after it has been marked ready, the
+ *    dequeing will succeed immediately.
+ *
+ * 2. Buffers are queued, user is waiting on a buffer and the device gets
+ *    disconnected.
+ *
+ *    When the device is disconnected, the kernel calls the completion handler
+ *    with an appropriate status code. The handler marks all buffers in the
+ *    irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so
+ *    that any process waiting on a buffer gets woken up.
+ *
+ *    Waking up up the first buffer on the irq list is not enough, as the
+ *    process waiting on the buffer might restart the dequeue operation
+ *    immediately.
+ *
+ */
+
+void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
+{
+	mutex_init(&queue->mutex);
+	spin_lock_init(&queue->irqlock);
+	INIT_LIST_HEAD(&queue->mainqueue);
+	INIT_LIST_HEAD(&queue->irqqueue);
+	queue->type = type;
+}
+
+/*
+ * Allocate the video buffers.
+ *
+ * Pages are reserved to make sure they will not be swapped, as they will be
+ * filled in the URB completion handler.
+ *
+ * Buffers will be individually mapped, so they must all be page aligned.
+ */
+int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
+		unsigned int buflength)
+{
+	unsigned int bufsize = PAGE_ALIGN(buflength);
+	unsigned int i;
+	void *mem = NULL;
+	int ret;
+
+	if (nbuffers > UVC_MAX_VIDEO_BUFFERS)
+		nbuffers = UVC_MAX_VIDEO_BUFFERS;
+
+	mutex_lock(&queue->mutex);
+
+	if ((ret = uvc_free_buffers(queue)) < 0)
+		goto done;
+
+	/* Bail out if no buffers should be allocated. */
+	if (nbuffers == 0)
+		goto done;
+
+	/* Decrement the number of buffers until allocation succeeds. */
+	for (; nbuffers > 0; --nbuffers) {
+		mem = vmalloc_32(nbuffers * bufsize);
+		if (mem != NULL)
+			break;
+	}
+
+	if (mem == NULL) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	for (i = 0; i < nbuffers; ++i) {
+		memset(&queue->buffer[i], 0, sizeof queue->buffer[i]);
+		queue->buffer[i].buf.index = i;
+		queue->buffer[i].buf.m.offset = i * bufsize;
+		queue->buffer[i].buf.length = buflength;
+		queue->buffer[i].buf.type = queue->type;
+		queue->buffer[i].buf.sequence = 0;
+		queue->buffer[i].buf.field = V4L2_FIELD_NONE;
+		queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP;
+		queue->buffer[i].buf.flags = 0;
+		init_waitqueue_head(&queue->buffer[i].wait);
+	}
+
+	queue->mem = mem;
+	queue->count = nbuffers;
+	queue->buf_size = bufsize;
+	ret = nbuffers;
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+	unsigned int i;
+
+	for (i = 0; i < queue->count; ++i) {
+		if (queue->buffer[i].vma_use_count != 0)
+			return -EBUSY;
+	}
+
+	if (queue->count) {
+		vfree(queue->mem);
+		queue->count = 0;
+	}
+
+	return 0;
+}
+
+static void __uvc_query_buffer(struct uvc_buffer *buf,
+		struct v4l2_buffer *v4l2_buf)
+{
+	memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf);
+
+	if (buf->vma_use_count)
+		v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED;
+
+	switch (buf->state) {
+	case UVC_BUF_STATE_ERROR:
+	case UVC_BUF_STATE_DONE:
+		v4l2_buf->flags |= V4L2_BUF_FLAG_DONE;
+		break;
+	case UVC_BUF_STATE_QUEUED:
+	case UVC_BUF_STATE_ACTIVE:
+		v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED;
+		break;
+	case UVC_BUF_STATE_IDLE:
+	default:
+		break;
+	}
+}
+
+int uvc_query_buffer(struct uvc_video_queue *queue,
+		struct v4l2_buffer *v4l2_buf)
+{
+	int ret = 0;
+
+	mutex_lock(&queue->mutex);
+	if (v4l2_buf->index >= queue->count) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	__uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf);
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+/*
+ * Queue a video buffer. Attempting to queue a buffer that has already been
+ * queued will return -EINVAL.
+ */
+int uvc_queue_buffer(struct uvc_video_queue *queue,
+	struct v4l2_buffer *v4l2_buf)
+{
+	struct uvc_buffer *buf;
+	unsigned long flags;
+	int ret = 0;
+
+	uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index);
+
+	if (v4l2_buf->type != queue->type ||
+	    v4l2_buf->memory != V4L2_MEMORY_MMAP) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
+			"and/or memory (%u).\n", v4l2_buf->type,
+			v4l2_buf->memory);
+		return -EINVAL;
+	}
+
+	mutex_lock(&queue->mutex);
+	if (v4l2_buf->index >= queue->count) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n");
+		ret = -EINVAL;
+		goto done;
+	}
+
+	buf = &queue->buffer[v4l2_buf->index];
+	if (buf->state != UVC_BUF_STATE_IDLE) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state "
+			"(%u).\n", buf->state);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (v4l2_buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+	    v4l2_buf->bytesused > buf->buf.length) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n");
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (v4l2_buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		buf->buf.bytesused = 0;
+	else
+		buf->buf.bytesused = v4l2_buf->bytesused;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	if (queue->flags & UVC_QUEUE_DISCONNECTED) {
+		spin_unlock_irqrestore(&queue->irqlock, flags);
+		ret = -ENODEV;
+		goto done;
+	}
+	buf->state = UVC_BUF_STATE_QUEUED;
+
+	ret = (queue->flags & UVC_QUEUE_PAUSED) != 0;
+	queue->flags &= ~UVC_QUEUE_PAUSED;
+
+	list_add_tail(&buf->stream, &queue->mainqueue);
+	list_add_tail(&buf->queue, &queue->irqqueue);
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking)
+{
+	if (nonblocking) {
+		return (buf->state != UVC_BUF_STATE_QUEUED &&
+			buf->state != UVC_BUF_STATE_ACTIVE)
+			? 0 : -EAGAIN;
+	}
+
+	return wait_event_interruptible(buf->wait,
+		buf->state != UVC_BUF_STATE_QUEUED &&
+		buf->state != UVC_BUF_STATE_ACTIVE);
+}
+
+/*
+ * Dequeue a video buffer. If nonblocking is false, block until a buffer is
+ * available.
+ */
+int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+		struct v4l2_buffer *v4l2_buf, int nonblocking)
+{
+	struct uvc_buffer *buf;
+	int ret = 0;
+
+	if (v4l2_buf->type != queue->type ||
+	    v4l2_buf->memory != V4L2_MEMORY_MMAP) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) "
+			"and/or memory (%u).\n", v4l2_buf->type,
+			v4l2_buf->memory);
+		return -EINVAL;
+	}
+
+	mutex_lock(&queue->mutex);
+	if (list_empty(&queue->mainqueue)) {
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n");
+		ret = -EINVAL;
+		goto done;
+	}
+
+	buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
+	if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0)
+		goto done;
+
+	uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n",
+		buf->buf.index, buf->state, buf->buf.bytesused);
+
+	switch (buf->state) {
+	case UVC_BUF_STATE_ERROR:
+		uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data "
+			"(transmission error).\n");
+		ret = -EIO;
+	case UVC_BUF_STATE_DONE:
+		buf->state = UVC_BUF_STATE_IDLE;
+		break;
+
+	case UVC_BUF_STATE_IDLE:
+	case UVC_BUF_STATE_QUEUED:
+	case UVC_BUF_STATE_ACTIVE:
+	default:
+		uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u "
+			"(driver bug?).\n", buf->state);
+		ret = -EINVAL;
+		goto done;
+	}
+
+	list_del(&buf->stream);
+	__uvc_query_buffer(buf, v4l2_buf);
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+/*
+ * Poll the video queue.
+ *
+ * This function implements video queue polling and is intended to be used by
+ * the device poll handler.
+ */
+unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file,
+		poll_table *wait)
+{
+	struct uvc_buffer *buf;
+	unsigned int mask = 0;
+
+	mutex_lock(&queue->mutex);
+	if (list_empty(&queue->mainqueue))
+		goto done;
+
+	buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream);
+
+	poll_wait(file, &buf->wait, wait);
+	if (buf->state == UVC_BUF_STATE_DONE ||
+	    buf->state == UVC_BUF_STATE_ERROR)
+		mask |= POLLOUT | POLLWRNORM;
+
+done:
+	mutex_unlock(&queue->mutex);
+	return mask;
+}
+
+/*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+	struct uvc_buffer *buffer = vma->vm_private_data;
+	buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+	struct uvc_buffer *buffer = vma->vm_private_data;
+	buffer->vma_use_count--;
+}
+
+static struct vm_operations_struct uvc_vm_ops = {
+	.open		= uvc_vm_open,
+	.close		= uvc_vm_close,
+};
+
+/*
+ * Memory-map a buffer.
+ *
+ * This function implements video buffer memory mapping and is intended to be
+ * used by the device mmap handler.
+ */
+int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+{
+	struct uvc_buffer *uninitialized_var(buffer);
+	struct page *page;
+	unsigned long addr, start, size;
+	unsigned int i;
+	int ret = 0;
+
+	start = vma->vm_start;
+	size = vma->vm_end - vma->vm_start;
+
+	mutex_lock(&queue->mutex);
+
+	for (i = 0; i < queue->count; ++i) {
+		buffer = &queue->buffer[i];
+		if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+
+	if (i == queue->count || size != queue->buf_size) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	/*
+	 * VM_IO marks the area as being an mmaped region for I/O to a
+	 * device. It also prevents the region from being core dumped.
+	 */
+	vma->vm_flags |= VM_IO;
+
+	addr = (unsigned long)queue->mem + buffer->buf.m.offset;
+	while (size > 0) {
+		page = vmalloc_to_page((void *)addr);
+		if ((ret = vm_insert_page(vma, start, page)) < 0)
+			goto done;
+
+		start += PAGE_SIZE;
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vma->vm_ops = &uvc_vm_ops;
+	vma->vm_private_data = buffer;
+	uvc_vm_open(vma);
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+/*
+ * Enable or disable the video buffers queue.
+ *
+ * The queue must be enabled before starting video acquisition and must be
+ * disabled after stopping it. This ensures that the video buffers queue
+ * state can be properly initialized before buffers are accessed from the
+ * interrupt handler.
+ *
+ * Enabling the video queue initializes parameters (such as sequence number,
+ * sync pattern, ...). If the queue is already enabled, return -EBUSY.
+ *
+ * Disabling the video queue cancels the queue and removes all buffers from
+ * the main queue.
+ *
+ * This function can't be called from interrupt context. Use
+ * uvc_queue_cancel() instead.
+ */
+int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+{
+	unsigned int i;
+	int ret = 0;
+
+	mutex_lock(&queue->mutex);
+	if (enable) {
+		if (uvc_queue_streaming(queue)) {
+			ret = -EBUSY;
+			goto done;
+		}
+		queue->sequence = 0;
+		queue->flags |= UVC_QUEUE_STREAMING;
+		queue->buf_used = 0;
+	} else {
+		uvc_queue_cancel(queue, 0);
+		INIT_LIST_HEAD(&queue->mainqueue);
+
+		for (i = 0; i < queue->count; ++i)
+			queue->buffer[i].state = UVC_BUF_STATE_IDLE;
+
+		queue->flags &= ~UVC_QUEUE_STREAMING;
+	}
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+/*
+ * Cancel the video buffers queue.
+ *
+ * Cancelling the queue marks all buffers on the irq queue as erroneous,
+ * wakes them up and removes them from the queue.
+ *
+ * If the disconnect parameter is set, further calls to uvc_queue_buffer will
+ * fail with -ENODEV.
+ *
+ * This function acquires the irq spinlock and can be called from interrupt
+ * context.
+ */
+void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+{
+	struct uvc_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	while (!list_empty(&queue->irqqueue)) {
+		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+				       queue);
+		list_del(&buf->queue);
+		buf->state = UVC_BUF_STATE_ERROR;
+		wake_up(&buf->wait);
+	}
+	/* This must be protected by the irqlock spinlock to avoid race
+	 * conditions between uvc_queue_buffer and the disconnection event that
+	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not
+	 * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED
+	 * state outside the queue code.
+	 */
+	if (disconnect)
+		queue->flags |= UVC_QUEUE_DISCONNECTED;
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+}
+
+struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+		struct uvc_buffer *buf)
+{
+	struct uvc_buffer *nextbuf;
+	unsigned long flags;
+
+	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
+	    buf->buf.length != buf->buf.bytesused) {
+		buf->state = UVC_BUF_STATE_QUEUED;
+		buf->buf.bytesused = 0;
+		return buf;
+	}
+
+	spin_lock_irqsave(&queue->irqlock, flags);
+	list_del(&buf->queue);
+	if (!list_empty(&queue->irqqueue))
+		nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+					   queue);
+	else
+		nextbuf = NULL;
+	spin_unlock_irqrestore(&queue->irqlock, flags);
+
+	buf->buf.sequence = queue->sequence++;
+	do_gettimeofday(&buf->buf.timestamp);
+
+	wake_up(&buf->wait);
+	return nextbuf;
+}
+
+struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
+{
+	struct uvc_buffer *buf = NULL;
+
+	if (!list_empty(&queue->irqqueue))
+		buf = list_first_entry(&queue->irqqueue, struct uvc_buffer,
+				       queue);
+	else
+		queue->flags |= UVC_QUEUE_PAUSED;
+
+	return buf;
+}
+
diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h
new file mode 100644
index 00000000000..7f5a33fe7ae
--- /dev/null
+++ b/drivers/usb/gadget/uvc_queue.h
@@ -0,0 +1,89 @@
+#ifndef _UVC_QUEUE_H_
+#define _UVC_QUEUE_H_
+
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <linux/poll.h>
+#include <linux/videodev2.h>
+
+/* Maximum frame size in bytes, for sanity checking. */
+#define UVC_MAX_FRAME_SIZE	(16*1024*1024)
+/* Maximum number of video buffers. */
+#define UVC_MAX_VIDEO_BUFFERS	32
+
+/* ------------------------------------------------------------------------
+ * Structures.
+ */
+
+enum uvc_buffer_state {
+	UVC_BUF_STATE_IDLE	= 0,
+	UVC_BUF_STATE_QUEUED	= 1,
+	UVC_BUF_STATE_ACTIVE	= 2,
+	UVC_BUF_STATE_DONE	= 3,
+	UVC_BUF_STATE_ERROR	= 4,
+};
+
+struct uvc_buffer {
+	unsigned long vma_use_count;
+	struct list_head stream;
+
+	/* Touched by interrupt handler. */
+	struct v4l2_buffer buf;
+	struct list_head queue;
+	wait_queue_head_t wait;
+	enum uvc_buffer_state state;
+};
+
+#define UVC_QUEUE_STREAMING		(1 << 0)
+#define UVC_QUEUE_DISCONNECTED		(1 << 1)
+#define UVC_QUEUE_DROP_INCOMPLETE	(1 << 2)
+#define UVC_QUEUE_PAUSED		(1 << 3)
+
+struct uvc_video_queue {
+	enum v4l2_buf_type type;
+
+	void *mem;
+	unsigned int flags;
+	__u32 sequence;
+
+	unsigned int count;
+	unsigned int buf_size;
+	unsigned int buf_used;
+	struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS];
+	struct mutex mutex;	/* protects buffers and mainqueue */
+	spinlock_t irqlock;	/* protects irqqueue */
+
+	struct list_head mainqueue;
+	struct list_head irqqueue;
+};
+
+extern void uvc_queue_init(struct uvc_video_queue *queue,
+		enum v4l2_buf_type type);
+extern int uvc_alloc_buffers(struct uvc_video_queue *queue,
+		unsigned int nbuffers, unsigned int buflength);
+extern int uvc_free_buffers(struct uvc_video_queue *queue);
+extern int uvc_query_buffer(struct uvc_video_queue *queue,
+		struct v4l2_buffer *v4l2_buf);
+extern int uvc_queue_buffer(struct uvc_video_queue *queue,
+		struct v4l2_buffer *v4l2_buf);
+extern int uvc_dequeue_buffer(struct uvc_video_queue *queue,
+		struct v4l2_buffer *v4l2_buf, int nonblocking);
+extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
+extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
+extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
+		struct uvc_buffer *buf);
+extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
+		struct file *file, poll_table *wait);
+extern int uvc_queue_mmap(struct uvc_video_queue *queue,
+		struct vm_area_struct *vma);
+static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
+{
+	return queue->flags & UVC_QUEUE_STREAMING;
+}
+extern struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue);
+
+#endif /* __KERNEL__ */
+
+#endif /* _UVC_QUEUE_H_ */
+
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
new file mode 100644
index 00000000000..a7989f29837
--- /dev/null
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -0,0 +1,374 @@
+/*
+ *	uvc_v4l2.c  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/vmalloc.h>
+#include <linux/wait.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+
+#include "uvc.h"
+#include "uvc_queue.h"
+
+/* --------------------------------------------------------------------------
+ * Requests handling
+ */
+
+static int
+uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
+{
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	struct usb_request *req = uvc->control_req;
+
+	if (data->length < 0)
+		return usb_ep_set_halt(cdev->gadget->ep0);
+
+	req->length = min(uvc->event_length, data->length);
+	req->zero = data->length < uvc->event_length;
+	req->dma = DMA_ADDR_INVALID;
+
+	memcpy(req->buf, data->data, data->length);
+
+	return usb_ep_queue(cdev->gadget->ep0, req, GFP_KERNEL);
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2
+ */
+
+struct uvc_format
+{
+	u8 bpp;
+	u32 fcc;
+};
+
+static struct uvc_format uvc_formats[] = {
+	{ 16, V4L2_PIX_FMT_YUYV  },
+	{ 0,  V4L2_PIX_FMT_MJPEG },
+};
+
+static int
+uvc_v4l2_get_format(struct uvc_video *video, struct v4l2_format *fmt)
+{
+	fmt->fmt.pix.pixelformat = video->fcc;
+	fmt->fmt.pix.width = video->width;
+	fmt->fmt.pix.height = video->height;
+	fmt->fmt.pix.field = V4L2_FIELD_NONE;
+	fmt->fmt.pix.bytesperline = video->bpp * video->width / 8;
+	fmt->fmt.pix.sizeimage = video->imagesize;
+	fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->fmt.pix.priv = 0;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_set_format(struct uvc_video *video, struct v4l2_format *fmt)
+{
+	struct uvc_format *format;
+	unsigned int imagesize;
+	unsigned int bpl;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(uvc_formats); ++i) {
+		format = &uvc_formats[i];
+		if (format->fcc == fmt->fmt.pix.pixelformat)
+			break;
+	}
+
+	if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) {
+		printk(KERN_INFO "Unsupported format 0x%08x.\n",
+			fmt->fmt.pix.pixelformat);
+		return -EINVAL;
+	}
+
+	bpl = format->bpp * fmt->fmt.pix.width / 8;
+	imagesize = bpl ? bpl * fmt->fmt.pix.height : fmt->fmt.pix.sizeimage;
+
+	video->fcc = format->fcc;
+	video->bpp = format->bpp;
+	video->width = fmt->fmt.pix.width;
+	video->height = fmt->fmt.pix.height;
+	video->imagesize = imagesize;
+
+	fmt->fmt.pix.field = V4L2_FIELD_NONE;
+	fmt->fmt.pix.bytesperline = bpl;
+	fmt->fmt.pix.sizeimage = imagesize;
+	fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->fmt.pix.priv = 0;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle;
+	int ret;
+
+	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
+	if (handle == NULL)
+		return -ENOMEM;
+
+	ret = v4l2_fh_init(&handle->vfh, vdev);
+	if (ret < 0)
+		goto error;
+
+	ret = v4l2_event_init(&handle->vfh);
+	if (ret < 0)
+		goto error;
+
+	ret = v4l2_event_alloc(&handle->vfh, 8);
+	if (ret < 0)
+		goto error;
+
+	v4l2_fh_add(&handle->vfh);
+
+	handle->device = &uvc->video;
+	file->private_data = &handle->vfh;
+
+	uvc_function_connect(uvc);
+	return 0;
+
+error:
+	v4l2_fh_exit(&handle->vfh);
+	return ret;
+}
+
+static int
+uvc_v4l2_release(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
+	struct uvc_video *video = handle->device;
+
+	uvc_function_disconnect(uvc);
+
+	uvc_video_enable(video, 0);
+	mutex_lock(&video->queue.mutex);
+	if (uvc_free_buffers(&video->queue) < 0)
+		printk(KERN_ERR "uvc_v4l2_release: Unable to free "
+				"buffers.\n");
+	mutex_unlock(&video->queue.mutex);
+
+	file->private_data = NULL;
+	v4l2_fh_del(&handle->vfh);
+	v4l2_fh_exit(&handle->vfh);
+	kfree(handle);
+	return 0;
+}
+
+static long
+uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+	struct uvc_video *video = &uvc->video;
+	int ret = 0;
+
+	switch (cmd) {
+	/* Query capabilities */
+	case VIDIOC_QUERYCAP:
+	{
+		struct v4l2_capability *cap = arg;
+
+		memset(cap, 0, sizeof *cap);
+		strncpy(cap->driver, "g_uvc", sizeof(cap->driver));
+		strncpy(cap->card, cdev->gadget->name, sizeof(cap->card));
+		strncpy(cap->bus_info, dev_name(&cdev->gadget->dev),
+			sizeof cap->bus_info);
+		cap->version = DRIVER_VERSION_NUMBER;
+		cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+		break;
+	}
+
+	/* Get & Set format */
+	case VIDIOC_G_FMT:
+	{
+		struct v4l2_format *fmt = arg;
+
+		if (fmt->type != video->queue.type)
+			return -EINVAL;
+
+		return uvc_v4l2_get_format(video, fmt);
+	}
+
+	case VIDIOC_S_FMT:
+	{
+		struct v4l2_format *fmt = arg;
+
+		if (fmt->type != video->queue.type)
+			return -EINVAL;
+
+		return uvc_v4l2_set_format(video, fmt);
+	}
+
+	/* Buffers & streaming */
+	case VIDIOC_REQBUFS:
+	{
+		struct v4l2_requestbuffers *rb = arg;
+
+		if (rb->type != video->queue.type ||
+		    rb->memory != V4L2_MEMORY_MMAP)
+			return -EINVAL;
+
+		ret = uvc_alloc_buffers(&video->queue, rb->count,
+					video->imagesize);
+		if (ret < 0)
+			return ret;
+
+		rb->count = ret;
+		ret = 0;
+		break;
+	}
+
+	case VIDIOC_QUERYBUF:
+	{
+		struct v4l2_buffer *buf = arg;
+
+		if (buf->type != video->queue.type)
+			return -EINVAL;
+
+		return uvc_query_buffer(&video->queue, buf);
+	}
+
+	case VIDIOC_QBUF:
+		if ((ret = uvc_queue_buffer(&video->queue, arg)) < 0)
+			return ret;
+
+		return uvc_video_pump(video);
+
+	case VIDIOC_DQBUF:
+		return uvc_dequeue_buffer(&video->queue, arg,
+			file->f_flags & O_NONBLOCK);
+
+	case VIDIOC_STREAMON:
+	{
+		int *type = arg;
+
+		if (*type != video->queue.type)
+			return -EINVAL;
+
+		return uvc_video_enable(video, 1);
+	}
+
+	case VIDIOC_STREAMOFF:
+	{
+		int *type = arg;
+
+		if (*type != video->queue.type)
+			return -EINVAL;
+
+		return uvc_video_enable(video, 0);
+	}
+
+	/* Events */
+        case VIDIOC_DQEVENT:
+	{
+		struct v4l2_event *event = arg;
+
+		ret = v4l2_event_dequeue(&handle->vfh, event,
+					 file->f_flags & O_NONBLOCK);
+		if (ret == 0 && event->type == UVC_EVENT_SETUP) {
+			struct uvc_event *uvc_event = (void *)&event->u.data;
+
+			/* Tell the complete callback to generate an event for
+			 * the next request that will be enqueued by
+			 * uvc_event_write.
+			 */
+			uvc->event_setup_out =
+				!(uvc_event->req.bRequestType & USB_DIR_IN);
+			uvc->event_length = uvc_event->req.wLength;
+		}
+
+		return ret;
+	}
+
+	case VIDIOC_SUBSCRIBE_EVENT:
+	{
+		struct v4l2_event_subscription *sub = arg;
+
+		if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
+			return -EINVAL;
+
+		return v4l2_event_subscribe(&handle->vfh, arg);
+	}
+
+	case VIDIOC_UNSUBSCRIBE_EVENT:
+		return v4l2_event_unsubscribe(&handle->vfh, arg);
+
+	case UVCIOC_SEND_RESPONSE:
+		ret = uvc_send_response(uvc, arg);
+		break;
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+
+	return ret;
+}
+
+static long
+uvc_v4l2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	return video_usercopy(file, cmd, arg, uvc_v4l2_do_ioctl);
+}
+
+static int
+uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+
+	return uvc_queue_mmap(&uvc->video.queue, vma);
+}
+
+static unsigned int
+uvc_v4l2_poll(struct file *file, poll_table *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
+	unsigned int mask = 0;
+
+	poll_wait(file, &handle->vfh.events->wait, wait);
+	if (v4l2_event_pending(&handle->vfh))
+		mask |= POLLPRI;
+
+	mask |= uvc_queue_poll(&uvc->video.queue, file, wait);
+
+	return mask;
+}
+
+struct v4l2_file_operations uvc_v4l2_fops = {
+	.owner		= THIS_MODULE,
+	.open		= uvc_v4l2_open,
+	.release	= uvc_v4l2_release,
+	.ioctl		= uvc_v4l2_ioctl,
+	.mmap		= uvc_v4l2_mmap,
+	.poll		= uvc_v4l2_poll,
+};
+
diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c
new file mode 100644
index 00000000000..de8cbc46518
--- /dev/null
+++ b/drivers/usb/gadget/uvc_video.c
@@ -0,0 +1,386 @@
+/*
+ *	uvc_video.c  --  USB Video Class Gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include <media/v4l2-dev.h>
+
+#include "uvc.h"
+#include "uvc_queue.h"
+
+/* --------------------------------------------------------------------------
+ * Video codecs
+ */
+
+static int
+uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf,
+		u8 *data, int len)
+{
+	data[0] = 2;
+	data[1] = UVC_STREAM_EOH | video->fid;
+
+	if (buf->buf.bytesused - video->queue.buf_used <= len - 2)
+		data[1] |= UVC_STREAM_EOF;
+
+	return 2;
+}
+
+static int
+uvc_video_encode_data(struct uvc_video *video, struct uvc_buffer *buf,
+		u8 *data, int len)
+{
+	struct uvc_video_queue *queue = &video->queue;
+	unsigned int nbytes;
+	void *mem;
+
+	/* Copy video data to the USB buffer. */
+	mem = queue->mem + buf->buf.m.offset + queue->buf_used;
+	nbytes = min((unsigned int)len, buf->buf.bytesused - queue->buf_used);
+
+	memcpy(data, mem, nbytes);
+	queue->buf_used += nbytes;
+
+	return nbytes;
+}
+
+static void
+uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
+		struct uvc_buffer *buf)
+{
+	void *mem = req->buf;
+	int len = video->req_size;
+	int ret;
+
+	/* Add a header at the beginning of the payload. */
+	if (video->payload_size == 0) {
+		ret = uvc_video_encode_header(video, buf, mem, len);
+		video->payload_size += ret;
+		mem += ret;
+		len -= ret;
+	}
+
+	/* Process video data. */
+	len = min((int)(video->max_payload_size - video->payload_size), len);
+	ret = uvc_video_encode_data(video, buf, mem, len);
+
+	video->payload_size += ret;
+	len -= ret;
+
+	req->length = video->req_size - len;
+	req->zero = video->payload_size == video->max_payload_size;
+
+	if (buf->buf.bytesused == video->queue.buf_used) {
+		video->queue.buf_used = 0;
+		buf->state = UVC_BUF_STATE_DONE;
+		uvc_queue_next_buffer(&video->queue, buf);
+		video->fid ^= UVC_STREAM_FID;
+
+		video->payload_size = 0;
+	}
+
+	if (video->payload_size == video->max_payload_size ||
+	    buf->buf.bytesused == video->queue.buf_used)
+		video->payload_size = 0;
+}
+
+static void
+uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
+		struct uvc_buffer *buf)
+{
+	void *mem = req->buf;
+	int len = video->req_size;
+	int ret;
+
+	/* Add the header. */
+	ret = uvc_video_encode_header(video, buf, mem, len);
+	mem += ret;
+	len -= ret;
+
+	/* Process video data. */
+	ret = uvc_video_encode_data(video, buf, mem, len);
+	len -= ret;
+
+	req->length = video->req_size - len;
+
+	if (buf->buf.bytesused == video->queue.buf_used) {
+		video->queue.buf_used = 0;
+		buf->state = UVC_BUF_STATE_DONE;
+		uvc_queue_next_buffer(&video->queue, buf);
+		video->fid ^= UVC_STREAM_FID;
+	}
+}
+
+/* --------------------------------------------------------------------------
+ * Request handling
+ */
+
+/*
+ * I somehow feel that synchronisation won't be easy to achieve here. We have
+ * three events that control USB requests submission:
+ *
+ * - USB request completion: the completion handler will resubmit the request
+ *   if a video buffer is available.
+ *
+ * - USB interface setting selection: in response to a SET_INTERFACE request,
+ *   the handler will start streaming if a video buffer is available and if
+ *   video is not currently streaming.
+ *
+ * - V4L2 buffer queueing: the driver will start streaming if video is not
+ *   currently streaming.
+ *
+ * Race conditions between those 3 events might lead to deadlocks or other
+ * nasty side effects.
+ *
+ * The "video currently streaming" condition can't be detected by the irqqueue
+ * being empty, as a request can still be in flight. A separate "queue paused"
+ * flag is thus needed.
+ *
+ * The paused flag will be set when we try to retrieve the irqqueue head if the
+ * queue is empty, and cleared when we queue a buffer.
+ *
+ * The USB request completion handler will get the buffer at the irqqueue head
+ * under protection of the queue spinlock. If the queue is empty, the streaming
+ * paused flag will be set. Right after releasing the spinlock a userspace
+ * application can queue a buffer. The flag will then cleared, and the ioctl
+ * handler will restart the video stream.
+ */
+static void
+uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct uvc_video *video = req->context;
+	struct uvc_buffer *buf;
+	unsigned long flags;
+	int ret;
+
+	switch (req->status) {
+	case 0:
+		break;
+
+	case -ESHUTDOWN:
+		printk(KERN_INFO "VS request cancelled.\n");
+		goto requeue;
+
+	default:
+		printk(KERN_INFO "VS request completed with status %d.\n",
+			req->status);
+		goto requeue;
+	}
+
+	spin_lock_irqsave(&video->queue.irqlock, flags);
+	buf = uvc_queue_head(&video->queue);
+	if (buf == NULL) {
+		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+		goto requeue;
+	}
+
+	video->encode(req, video, buf);
+
+	if ((ret = usb_ep_queue(ep, req, GFP_ATOMIC)) < 0) {
+		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
+		usb_ep_set_halt(ep);
+		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+		goto requeue;
+	}
+	spin_unlock_irqrestore(&video->queue.irqlock, flags);
+
+	return;
+
+requeue:
+	spin_lock_irqsave(&video->req_lock, flags);
+	list_add_tail(&req->list, &video->req_free);
+	spin_unlock_irqrestore(&video->req_lock, flags);
+}
+
+static int
+uvc_video_free_requests(struct uvc_video *video)
+{
+	unsigned int i;
+
+	for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
+		if (video->req[i]) {
+			usb_ep_free_request(video->ep, video->req[i]);
+			video->req[i] = NULL;
+		}
+
+		if (video->req_buffer[i]) {
+			kfree(video->req_buffer[i]);
+			video->req_buffer[i] = NULL;
+		}
+	}
+
+	INIT_LIST_HEAD(&video->req_free);
+	video->req_size = 0;
+	return 0;
+}
+
+static int
+uvc_video_alloc_requests(struct uvc_video *video)
+{
+	unsigned int i;
+	int ret = -ENOMEM;
+
+	BUG_ON(video->req_size);
+
+	for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
+		video->req_buffer[i] = kmalloc(video->ep->maxpacket, GFP_KERNEL);
+		if (video->req_buffer[i] == NULL)
+			goto error;
+
+		video->req[i] = usb_ep_alloc_request(video->ep, GFP_KERNEL);
+		if (video->req[i] == NULL)
+			goto error;
+
+		video->req[i]->buf = video->req_buffer[i];
+		video->req[i]->length = 0;
+		video->req[i]->dma = DMA_ADDR_INVALID;
+		video->req[i]->complete = uvc_video_complete;
+		video->req[i]->context = video;
+
+		list_add_tail(&video->req[i]->list, &video->req_free);
+	}
+
+	video->req_size = video->ep->maxpacket;
+	return 0;
+
+error:
+	uvc_video_free_requests(video);
+	return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * Video streaming
+ */
+
+/*
+ * uvc_video_pump - Pump video data into the USB requests
+ *
+ * This function fills the available USB requests (listed in req_free) with
+ * video data from the queued buffers.
+ */
+int
+uvc_video_pump(struct uvc_video *video)
+{
+	struct usb_request *req;
+	struct uvc_buffer *buf;
+	unsigned long flags;
+	int ret;
+
+	/* FIXME TODO Race between uvc_video_pump and requests completion
+	 * handler ???
+	 */
+
+	while (1) {
+		/* Retrieve the first available USB request, protected by the
+		 * request lock.
+		 */
+		spin_lock_irqsave(&video->req_lock, flags);
+		if (list_empty(&video->req_free)) {
+			spin_unlock_irqrestore(&video->req_lock, flags);
+			return 0;
+		}
+		req = list_first_entry(&video->req_free, struct usb_request,
+					list);
+		list_del(&req->list);
+		spin_unlock_irqrestore(&video->req_lock, flags);
+
+		/* Retrieve the first available video buffer and fill the
+		 * request, protected by the video queue irqlock.
+		 */
+		spin_lock_irqsave(&video->queue.irqlock, flags);
+		buf = uvc_queue_head(&video->queue);
+		if (buf == NULL) {
+			spin_unlock_irqrestore(&video->queue.irqlock, flags);
+			break;
+		}
+
+		video->encode(req, video, buf);
+
+		/* Queue the USB request */
+		if ((ret = usb_ep_queue(video->ep, req, GFP_KERNEL)) < 0) {
+			printk(KERN_INFO "Failed to queue request (%d)\n", ret);
+			usb_ep_set_halt(video->ep);
+			spin_unlock_irqrestore(&video->queue.irqlock, flags);
+			break;
+		}
+		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+	}
+
+	spin_lock_irqsave(&video->req_lock, flags);
+	list_add_tail(&req->list, &video->req_free);
+	spin_unlock_irqrestore(&video->req_lock, flags);
+	return 0;
+}
+
+/*
+ * Enable or disable the video stream.
+ */
+int
+uvc_video_enable(struct uvc_video *video, int enable)
+{
+	unsigned int i;
+	int ret;
+
+	if (video->ep == NULL) {
+		printk(KERN_INFO "Video enable failed, device is "
+			"uninitialized.\n");
+		return -ENODEV;
+	}
+
+	if (!enable) {
+		for (i = 0; i < UVC_NUM_REQUESTS; ++i)
+			usb_ep_dequeue(video->ep, video->req[i]);
+
+		uvc_video_free_requests(video);
+		uvc_queue_enable(&video->queue, 0);
+		return 0;
+	}
+
+	if ((ret = uvc_queue_enable(&video->queue, 1)) < 0)
+		return ret;
+
+	if ((ret = uvc_video_alloc_requests(video)) < 0)
+		return ret;
+
+	if (video->max_payload_size) {
+		video->encode = uvc_video_encode_bulk;
+		video->payload_size = 0;
+	} else
+		video->encode = uvc_video_encode_isoc;
+
+	return uvc_video_pump(video);
+}
+
+/*
+ * Initialize the UVC video stream.
+ */
+int
+uvc_video_init(struct uvc_video *video)
+{
+	INIT_LIST_HEAD(&video->req_free);
+	spin_lock_init(&video->req_lock);
+
+	video->fcc = V4L2_PIX_FMT_YUYV;
+	video->bpp = 16;
+	video->width = 320;
+	video->height = 240;
+	video->imagesize = 320 * 240 * 2;
+
+	/* Initialize the video buffers queue. */
+	uvc_queue_init(&video->queue, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	return 0;
+}
+
diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c
new file mode 100644
index 00000000000..417fd688769
--- /dev/null
+++ b/drivers/usb/gadget/webcam.c
@@ -0,0 +1,399 @@
+/*
+ *	webcam.c -- USB webcam gadget driver
+ *
+ *	Copyright (C) 2009-2010
+ *	    Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/usb/video.h>
+
+#include "f_uvc.h"
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "f_uvc.c"
+#include "uvc_queue.c"
+#include "uvc_v4l2.c"
+#include "uvc_video.c"
+
+/* --------------------------------------------------------------------------
+ * Device descriptor
+ */
+
+#define WEBCAM_VENDOR_ID		0x1d6b	/* Linux Foundation */
+#define WEBCAM_PRODUCT_ID		0x0102	/* Webcam A/V gadget */
+#define WEBCAM_DEVICE_BCD		0x0010	/* 0.10 */
+
+static char webcam_vendor_label[] = "Linux Foundation";
+static char webcam_product_label[] = "Webcam gadget";
+static char webcam_config_label[] = "Video";
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+#define STRING_DESCRIPTION_IDX		2
+
+static struct usb_string webcam_strings[] = {
+	[STRING_MANUFACTURER_IDX].s = webcam_vendor_label,
+	[STRING_PRODUCT_IDX].s = webcam_product_label,
+	[STRING_DESCRIPTION_IDX].s = webcam_config_label,
+	{  }
+};
+
+static struct usb_gadget_strings webcam_stringtab = {
+	.language = 0x0409,	/* en-us */
+	.strings = webcam_strings,
+};
+
+static struct usb_gadget_strings *webcam_device_strings[] = {
+	&webcam_stringtab,
+	NULL,
+};
+
+static struct usb_device_descriptor webcam_device_descriptor = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	.bcdUSB			= cpu_to_le16(0x0200),
+	.bDeviceClass		= USB_CLASS_MISC,
+	.bDeviceSubClass	= 0x02,
+	.bDeviceProtocol	= 0x01,
+	.bMaxPacketSize0	= 0, /* dynamic */
+	.idVendor		= cpu_to_le16(WEBCAM_VENDOR_ID),
+	.idProduct		= cpu_to_le16(WEBCAM_PRODUCT_ID),
+	.bcdDevice		= cpu_to_le16(WEBCAM_DEVICE_BCD),
+	.iManufacturer		= 0, /* dynamic */
+	.iProduct		= 0, /* dynamic */
+	.iSerialNumber		= 0, /* dynamic */
+	.bNumConfigurations	= 0, /* dynamic */
+};
+
+DECLARE_UVC_HEADER_DESCRIPTOR(1);
+
+static const struct UVC_HEADER_DESCRIPTOR(1) uvc_control_header = {
+	.bLength		= UVC_DT_HEADER_SIZE(1),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_HEADER,
+	.bcdUVC			= cpu_to_le16(0x0100),
+	.wTotalLength		= 0, /* dynamic */
+	.dwClockFrequency	= cpu_to_le32(48000000),
+	.bInCollection		= 0, /* dynamic */
+	.baInterfaceNr[0]	= 0, /* dynamic */
+};
+
+static const struct uvc_camera_terminal_descriptor uvc_camera_terminal = {
+	.bLength		= UVC_DT_CAMERA_TERMINAL_SIZE(3),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_INPUT_TERMINAL,
+	.bTerminalID		= 1,
+	.wTerminalType		= cpu_to_le16(0x0201),
+	.bAssocTerminal		= 0,
+	.iTerminal		= 0,
+	.wObjectiveFocalLengthMin	= cpu_to_le16(0),
+	.wObjectiveFocalLengthMax	= cpu_to_le16(0),
+	.wOcularFocalLength		= cpu_to_le16(0),
+	.bControlSize		= 3,
+	.bmControls[0]		= 2,
+	.bmControls[1]		= 0,
+	.bmControls[2]		= 0,
+};
+
+static const struct uvc_processing_unit_descriptor uvc_processing = {
+	.bLength		= UVC_DT_PROCESSING_UNIT_SIZE(2),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_PROCESSING_UNIT,
+	.bUnitID		= 2,
+	.bSourceID		= 1,
+	.wMaxMultiplier		= cpu_to_le16(16*1024),
+	.bControlSize		= 2,
+	.bmControls[0]		= 1,
+	.bmControls[1]		= 0,
+	.iProcessing		= 0,
+};
+
+static const struct uvc_output_terminal_descriptor uvc_output_terminal = {
+	.bLength		= UVC_DT_OUTPUT_TERMINAL_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_OUTPUT_TERMINAL,
+	.bTerminalID		= 3,
+	.wTerminalType		= cpu_to_le16(0x0101),
+	.bAssocTerminal		= 0,
+	.bSourceID		= 2,
+	.iTerminal		= 0,
+};
+
+DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(1, 2);
+
+static const struct UVC_INPUT_HEADER_DESCRIPTOR(1, 2) uvc_input_header = {
+	.bLength		= UVC_DT_INPUT_HEADER_SIZE(1, 2),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_INPUT_HEADER,
+	.bNumFormats		= 2,
+	.wTotalLength		= 0, /* dynamic */
+	.bEndpointAddress	= 0, /* dynamic */
+	.bmInfo			= 0,
+	.bTerminalLink		= 3,
+	.bStillCaptureMethod	= 0,
+	.bTriggerSupport	= 0,
+	.bTriggerUsage		= 0,
+	.bControlSize		= 1,
+	.bmaControls[0][0]	= 0,
+	.bmaControls[1][0]	= 4,
+};
+
+static const struct uvc_format_uncompressed uvc_format_yuv = {
+	.bLength		= UVC_DT_FORMAT_UNCOMPRESSED_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_FORMAT_UNCOMPRESSED,
+	.bFormatIndex		= 1,
+	.bNumFrameDescriptors	= 2,
+	.guidFormat		=
+		{ 'Y',  'U',  'Y',  '2', 0x00, 0x00, 0x10, 0x00,
+		 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71},
+	.bBitsPerPixel		= 16,
+	.bDefaultFrameIndex	= 1,
+	.bAspectRatioX		= 0,
+	.bAspectRatioY		= 0,
+	.bmInterfaceFlags	= 0,
+	.bCopyProtect		= 0,
+};
+
+DECLARE_UVC_FRAME_UNCOMPRESSED(1);
+DECLARE_UVC_FRAME_UNCOMPRESSED(3);
+
+static const struct UVC_FRAME_UNCOMPRESSED(3) uvc_frame_yuv_360p = {
+	.bLength		= UVC_DT_FRAME_UNCOMPRESSED_SIZE(3),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_FRAME_UNCOMPRESSED,
+	.bFrameIndex		= 1,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(640),
+	.wHeight		= cpu_to_le16(360),
+	.dwMinBitRate		= cpu_to_le32(18432000),
+	.dwMaxBitRate		= cpu_to_le32(55296000),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(460800),
+	.dwDefaultFrameInterval	= cpu_to_le32(666666),
+	.bFrameIntervalType	= 3,
+	.dwFrameInterval[0]	= cpu_to_le32(666666),
+	.dwFrameInterval[1]	= cpu_to_le32(1000000),
+	.dwFrameInterval[2]	= cpu_to_le32(5000000),
+};
+
+static const struct UVC_FRAME_UNCOMPRESSED(1) uvc_frame_yuv_720p = {
+	.bLength		= UVC_DT_FRAME_UNCOMPRESSED_SIZE(1),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_FRAME_UNCOMPRESSED,
+	.bFrameIndex		= 2,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(1280),
+	.wHeight		= cpu_to_le16(720),
+	.dwMinBitRate		= cpu_to_le32(29491200),
+	.dwMaxBitRate		= cpu_to_le32(29491200),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(1843200),
+	.dwDefaultFrameInterval	= cpu_to_le32(5000000),
+	.bFrameIntervalType	= 1,
+	.dwFrameInterval[0]	= cpu_to_le32(5000000),
+};
+
+static const struct uvc_format_mjpeg uvc_format_mjpg = {
+	.bLength		= UVC_DT_FORMAT_MJPEG_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_FORMAT_MJPEG,
+	.bFormatIndex		= 2,
+	.bNumFrameDescriptors	= 2,
+	.bmFlags		= 0,
+	.bDefaultFrameIndex	= 1,
+	.bAspectRatioX		= 0,
+	.bAspectRatioY		= 0,
+	.bmInterfaceFlags	= 0,
+	.bCopyProtect		= 0,
+};
+
+DECLARE_UVC_FRAME_MJPEG(1);
+DECLARE_UVC_FRAME_MJPEG(3);
+
+static const struct UVC_FRAME_MJPEG(3) uvc_frame_mjpg_360p = {
+	.bLength		= UVC_DT_FRAME_MJPEG_SIZE(3),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_FRAME_MJPEG,
+	.bFrameIndex		= 1,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(640),
+	.wHeight		= cpu_to_le16(360),
+	.dwMinBitRate		= cpu_to_le32(18432000),
+	.dwMaxBitRate		= cpu_to_le32(55296000),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(460800),
+	.dwDefaultFrameInterval	= cpu_to_le32(666666),
+	.bFrameIntervalType	= 3,
+	.dwFrameInterval[0]	= cpu_to_le32(666666),
+	.dwFrameInterval[1]	= cpu_to_le32(1000000),
+	.dwFrameInterval[2]	= cpu_to_le32(5000000),
+};
+
+static const struct UVC_FRAME_MJPEG(1) uvc_frame_mjpg_720p = {
+	.bLength		= UVC_DT_FRAME_MJPEG_SIZE(1),
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_FRAME_MJPEG,
+	.bFrameIndex		= 2,
+	.bmCapabilities		= 0,
+	.wWidth			= cpu_to_le16(1280),
+	.wHeight		= cpu_to_le16(720),
+	.dwMinBitRate		= cpu_to_le32(29491200),
+	.dwMaxBitRate		= cpu_to_le32(29491200),
+	.dwMaxVideoFrameBufferSize	= cpu_to_le32(1843200),
+	.dwDefaultFrameInterval	= cpu_to_le32(5000000),
+	.bFrameIntervalType	= 1,
+	.dwFrameInterval[0]	= cpu_to_le32(5000000),
+};
+
+static const struct uvc_color_matching_descriptor uvc_color_matching = {
+	.bLength		= UVC_DT_COLOR_MATCHING_SIZE,
+	.bDescriptorType	= USB_DT_CS_INTERFACE,
+	.bDescriptorSubType	= UVC_DT_COLOR_MATCHING,
+	.bColorPrimaries	= 1,
+	.bTransferCharacteristics	= 1,
+	.bMatrixCoefficients	= 4,
+};
+
+static const struct uvc_descriptor_header * const uvc_control_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_control_header,
+	(const struct uvc_descriptor_header *) &uvc_camera_terminal,
+	(const struct uvc_descriptor_header *) &uvc_processing,
+	(const struct uvc_descriptor_header *) &uvc_output_terminal,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_fs_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
+static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
+	(const struct uvc_descriptor_header *) &uvc_input_header,
+	(const struct uvc_descriptor_header *) &uvc_format_yuv,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+	(const struct uvc_descriptor_header *) &uvc_format_mjpg,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
+	(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
+	(const struct uvc_descriptor_header *) &uvc_color_matching,
+	NULL,
+};
+
+/* --------------------------------------------------------------------------
+ * USB configuration
+ */
+
+static int __init
+webcam_config_bind(struct usb_configuration *c)
+{
+	return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls,
+			       uvc_hs_streaming_cls);
+}
+
+static struct usb_configuration webcam_config_driver = {
+	.label			= webcam_config_label,
+	.bind			= webcam_config_bind,
+	.bConfigurationValue	= 1,
+	.iConfiguration		= 0, /* dynamic */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower		= CONFIG_USB_GADGET_VBUS_DRAW / 2,
+};
+
+static int /* __init_or_exit */
+webcam_unbind(struct usb_composite_dev *cdev)
+{
+	return 0;
+}
+
+static int __init
+webcam_bind(struct usb_composite_dev *cdev)
+{
+	int ret;
+
+	/* Allocate string descriptor numbers ... note that string contents
+	 * can be overridden by the composite_dev glue.
+	 */
+	if ((ret = usb_string_id(cdev)) < 0)
+		goto error;
+	webcam_strings[STRING_MANUFACTURER_IDX].id = ret;
+	webcam_device_descriptor.iManufacturer = ret;
+
+	if ((ret = usb_string_id(cdev)) < 0)
+		goto error;
+	webcam_strings[STRING_PRODUCT_IDX].id = ret;
+	webcam_device_descriptor.iProduct = ret;
+
+	if ((ret = usb_string_id(cdev)) < 0)
+		goto error;
+	webcam_strings[STRING_DESCRIPTION_IDX].id = ret;
+	webcam_config_driver.iConfiguration = ret;
+
+	/* Register our configuration. */
+	if ((ret = usb_add_config(cdev, &webcam_config_driver)) < 0)
+		goto error;
+
+	INFO(cdev, "Webcam Video Gadget\n");
+	return 0;
+
+error:
+	webcam_unbind(cdev);
+	return ret;
+}
+
+/* --------------------------------------------------------------------------
+ * Driver
+ */
+
+static struct usb_composite_driver webcam_driver = {
+	.name		= "g_webcam",
+	.dev		= &webcam_device_descriptor,
+	.strings	= webcam_device_strings,
+	.bind		= webcam_bind,
+	.unbind		= webcam_unbind,
+};
+
+static int __init
+webcam_init(void)
+{
+	return usb_composite_register(&webcam_driver);
+}
+
+static void __exit
+webcam_cleanup(void)
+{
+	usb_composite_unregister(&webcam_driver);
+}
+
+module_init(webcam_init);
+module_exit(webcam_cleanup);
+
+MODULE_AUTHOR("Laurent Pinchart");
+MODULE_DESCRIPTION("Webcam Video Gadget");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1.0");
+
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8d3df0397de..f865be2276d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -207,6 +207,21 @@ config USB_OHCI_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called ohci-hcd.
 
+config USB_OHCI_HCD_OMAP1
+	bool "OHCI support for OMAP1/2 chips"
+	depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
+	default y
+	---help---
+	  Enables support for the OHCI controller on OMAP1/2 chips.
+
+config USB_OHCI_HCD_OMAP3
+	bool "OHCI support for OMAP3 and later chips"
+	depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4)
+	default y
+	---help---
+	  Enables support for the on-chip OHCI controller on
+	  OMAP3 and later chips.
+
 config USB_OHCI_HCD_PPC_SOC
 	bool "OHCI support for on-chip PPC USB controller"
 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index e3a74e75e82..faa61748db7 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -69,6 +69,15 @@ static void au1xxx_stop_ehc(void)
 	au_sync();
 }
 
+static int au1xxx_ehci_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret = ehci_init(hcd);
+
+	ehci->need_io_watchdog = 0;
+	return ret;
+}
+
 static const struct hc_driver ehci_au1xxx_hc_driver = {
 	.description		= hcd_name,
 	.product_desc		= "Au1xxx EHCI",
@@ -86,7 +95,7 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
 	 * FIXME -- ehci_init() doesn't do enough here.
 	 * See ehci-ppc-soc for a complete implementation.
 	 */
-	.reset			= ehci_init,
+	.reset			= au1xxx_ehci_setup,
 	.start			= ehci_run,
 	.stop			= ehci_stop,
 	.shutdown		= ehci_shutdown,
@@ -215,26 +224,17 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 		msleep(10);
 
 	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible, bail out if RH has been resumed. Use
-	 * the spinlock to properly synchronize with possible pending
-	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
+	 * mark HW unaccessible.  The PM and USB cores make sure that
+	 * the root hub is either suspended or stopped.
 	 */
 	spin_lock_irqsave(&ehci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
-		rc = -EINVAL;
-		goto bail;
-	}
+	ehci_prepare_ports_for_controller_suspend(ehci);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	au1xxx_stop_ehc();
-
-bail:
 	spin_unlock_irqrestore(&ehci->lock, flags);
 
 	// could save FLADJ in case of Vaux power loss
@@ -264,6 +264,7 @@ static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
 		int	mask = INTR_MASK;
 
+		ehci_prepare_ports_for_controller_resume(ehci);
 		if (!hcd->self.root_hub->do_remote_wakeup)
 			mask &= ~STS_PCD;
 		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 0e26aa13f15..5cd967d2893 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -313,6 +313,7 @@ static int ehci_fsl_drv_suspend(struct device *dev)
 	struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
 	void __iomem *non_ehci = hcd->regs;
 
+	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd));
 	if (!fsl_deep_sleep())
 		return 0;
 
@@ -327,6 +328,7 @@ static int ehci_fsl_drv_resume(struct device *dev)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	void __iomem *non_ehci = hcd->regs;
 
+	ehci_prepare_ports_for_controller_resume(ehci);
 	if (!fsl_deep_sleep())
 		return 0;
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 13ead00aecd..ef3e88f0b3c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -31,13 +31,12 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 
-#include "../core/hcd.h"
-
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index c7178bcde67..e7d3d8def28 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -106,12 +106,75 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 	ehci->owned_ports = 0;
 }
 
+static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+		bool suspending)
+{
+	int		port;
+	u32		temp;
+
+	/* If remote wakeup is enabled for the root hub but disabled
+	 * for the controller, we must adjust all the port wakeup flags
+	 * when the controller is suspended or resumed.  In all other
+	 * cases they don't need to be changed.
+	 */
+	if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup ||
+			device_may_wakeup(ehci_to_hcd(ehci)->self.controller))
+		return;
+
+	/* clear phy low-power mode before changing wakeup flags */
+	if (ehci->has_hostpc) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg;
+
+			hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+					+ HOSTPC0 + 4 * port);
+			temp = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
+		}
+		msleep(5);
+	}
+
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem	*reg = &ehci->regs->port_status[port];
+		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
+		u32		t2 = t1 & ~PORT_WAKE_BITS;
+
+		/* If we are suspending the controller, clear the flags.
+		 * If we are resuming the controller, set the wakeup flags.
+		 */
+		if (!suspending) {
+			if (t1 & PORT_CONNECT)
+				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
+			else
+				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
+		}
+		ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
+				port + 1, t1, t2);
+		ehci_writel(ehci, t2, reg);
+	}
+
+	/* enter phy low-power mode again */
+	if (ehci->has_hostpc) {
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg;
+
+			hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+					+ HOSTPC0 + 4 * port);
+			temp = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
+		}
+	}
+}
+
 static int ehci_bus_suspend (struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 	int			port;
 	int			mask;
-	u32 __iomem		*hostpc_reg = NULL;
+	int			changed;
 
 	ehci_dbg(ehci, "suspend root hub\n");
 
@@ -155,15 +218,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	 */
 	ehci->bus_suspended = 0;
 	ehci->owned_ports = 0;
+	changed = 0;
 	port = HCS_N_PORTS(ehci->hcs_params);
 	while (port--) {
 		u32 __iomem	*reg = &ehci->regs->port_status [port];
 		u32		t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
-		u32		t2 = t1;
+		u32		t2 = t1 & ~PORT_WAKE_BITS;
 
-		if (ehci->has_hostpc)
-			hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
-				+ HOSTPC0 + 4 * (port & 0xff));
 		/* keep track of which ports we suspend */
 		if (t1 & PORT_OWNER)
 			set_bit(port, &ehci->owned_ports);
@@ -172,40 +233,45 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 			set_bit(port, &ehci->bus_suspended);
 		}
 
-		/* enable remote wakeup on all ports */
+		/* enable remote wakeup on all ports, if told to do so */
 		if (hcd->self.root_hub->do_remote_wakeup) {
 			/* only enable appropriate wake bits, otherwise the
 			 * hardware can not go phy low power mode. If a race
 			 * condition happens here(connection change during bits
 			 * set), the port change detection will finally fix it.
 			 */
-			if (t1 & PORT_CONNECT) {
+			if (t1 & PORT_CONNECT)
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
-				t2 &= ~PORT_WKCONN_E;
-			} else {
+			else
 				t2 |= PORT_WKOC_E | PORT_WKCONN_E;
-				t2 &= ~PORT_WKDISC_E;
-			}
-		} else
-			t2 &= ~PORT_WAKE_BITS;
+		}
 
 		if (t1 != t2) {
 			ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
 				port + 1, t1, t2);
 			ehci_writel(ehci, t2, reg);
-			if (hostpc_reg) {
-				u32	t3;
+			changed = 1;
+		}
+	}
 
-				spin_unlock_irq(&ehci->lock);
-				msleep(5);/* 5ms for HCD enter low pwr mode */
-				spin_lock_irq(&ehci->lock);
-				t3 = ehci_readl(ehci, hostpc_reg);
-				ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
-				t3 = ehci_readl(ehci, hostpc_reg);
-				ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
+	if (changed && ehci->has_hostpc) {
+		spin_unlock_irq(&ehci->lock);
+		msleep(5);	/* 5 ms for HCD to enter low-power mode */
+		spin_lock_irq(&ehci->lock);
+
+		port = HCS_N_PORTS(ehci->hcs_params);
+		while (port--) {
+			u32 __iomem	*hostpc_reg;
+			u32		t3;
+
+			hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+					+ HOSTPC0 + 4 * port);
+			t3 = ehci_readl(ehci, hostpc_reg);
+			ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
+			t3 = ehci_readl(ehci, hostpc_reg);
+			ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
 					port, (t3 & HOSTPC_PHCD) ?
 					"succeeded" : "failed");
-			}
 		}
 	}
 
@@ -291,6 +357,25 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	msleep(8);
 	spin_lock_irq(&ehci->lock);
 
+	/* clear phy low-power mode before resume */
+	if (ehci->bus_suspended && ehci->has_hostpc) {
+		i = HCS_N_PORTS(ehci->hcs_params);
+		while (i--) {
+			if (test_bit(i, &ehci->bus_suspended)) {
+				u32 __iomem	*hostpc_reg;
+
+				hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
+						+ HOSTPC0 + 4 * i);
+				temp = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp & ~HOSTPC_PHCD,
+						hostpc_reg);
+			}
+		}
+		spin_unlock_irq(&ehci->lock);
+		msleep(5);
+		spin_lock_irq(&ehci->lock);
+	}
+
 	/* manually resume the ports we suspended during bus_suspend() */
 	i = HCS_N_PORTS (ehci->hcs_params);
 	while (i--) {
@@ -659,7 +744,7 @@ static int ehci_hub_control (
 		 * Even if OWNER is set, so the port is owned by the
 		 * companion controller, khubd needs to be able to clear
 		 * the port-change status bits (especially
-		 * USB_PORT_FEAT_C_CONNECTION).
+		 * USB_PORT_STAT_C_CONNECTION).
 		 */
 
 		switch (wValue) {
@@ -675,16 +760,25 @@ static int ehci_hub_control (
 				goto error;
 			if (ehci->no_selective_suspend)
 				break;
-			if (temp & PORT_SUSPEND) {
-				if ((temp & PORT_PE) == 0)
-					goto error;
-				/* resume signaling for 20 msec */
-				temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
-				ehci_writel(ehci, temp | PORT_RESUME,
-						status_reg);
-				ehci->reset_done [wIndex] = jiffies
-						+ msecs_to_jiffies (20);
+			if (!(temp & PORT_SUSPEND))
+				break;
+			if ((temp & PORT_PE) == 0)
+				goto error;
+
+			/* clear phy low-power mode before resume */
+			if (hostpc_reg) {
+				temp1 = ehci_readl(ehci, hostpc_reg);
+				ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
+						hostpc_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
+				msleep(5);/* wait to leave low-power mode */
+				spin_lock_irqsave(&ehci->lock, flags);
 			}
+			/* resume signaling for 20 msec */
+			temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
+			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+			ehci->reset_done[wIndex] = jiffies
+					+ msecs_to_jiffies(20);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &ehci->port_c_suspend);
@@ -729,12 +823,12 @@ static int ehci_hub_control (
 
 		// wPortChange bits
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 		if (temp & PORT_PEC)
-			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+			status |= USB_PORT_STAT_C_ENABLE << 16;
 
 		if ((temp & PORT_OCC) && !ignore_oc){
-			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
 			/*
 			 * Hubs should disable port power on over-current.
@@ -791,7 +885,7 @@ static int ehci_hub_control (
 		if ((temp & PORT_RESET)
 				&& time_after_eq(jiffies,
 					ehci->reset_done[wIndex])) {
-			status |= 1 << USB_PORT_FEAT_C_RESET;
+			status |= USB_PORT_STAT_C_RESET << 16;
 			ehci->reset_done [wIndex] = 0;
 
 			/* force reset to complete */
@@ -833,7 +927,7 @@ static int ehci_hub_control (
 		 */
 
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			// status may be from integrated TT
 			if (ehci->has_hostpc) {
 				temp1 = ehci_readl(ehci, hostpc_reg);
@@ -842,11 +936,11 @@ static int ehci_hub_control (
 				status |= ehci_port_speed(ehci, temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 
 		/* maybe the port was unsuspended without our knowledge */
 		if (temp & (PORT_SUSPEND|PORT_RESUME)) {
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+			status |= USB_PORT_STAT_SUSPEND;
 		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
 			clear_bit(wIndex, &ehci->suspended_ports);
 			ehci->reset_done[wIndex] = 0;
@@ -855,13 +949,13 @@ static int ehci_hub_control (
 		}
 
 		if (temp & PORT_OC)
-			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 		if (test_bit(wIndex, &ehci->port_c_suspend))
-			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+			status |= USB_PORT_STAT_C_SUSPEND << 16;
 
 #ifndef	VERBOSE_DEBUG
 	if (status & ~0xffff)	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 0cd6c7795d9..5450e628157 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -116,6 +116,8 @@
 #define	OMAP_UHH_DEBUG_CSR				(0x44)
 
 /* EHCI Register Set */
+#define EHCI_INSNREG04					(0xA0)
+#define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
 #define	EHCI_INSNREG05_ULPI				(0xA4)
 #define	EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
 #define	EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
@@ -352,8 +354,8 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 	/* Bypass the TLL module for PHY mode operation */
-	 if (omap_rev() <= OMAP3430_REV_ES2_1) {
-		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1 \n");
+	if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
 		if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
 			(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
 				(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
@@ -382,6 +384,18 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
 
+	/*
+	 * An undocumented "feature" in the OMAP3 EHCI controller,
+	 * causes suspended ports to be taken out of suspend when
+	 * the USBCMD.Run/Stop bit is cleared (for example when
+	 * we do ehci_bus_suspend).
+	 * This breaks suspend-resume if the root-hub is allowed
+	 * to suspend. Writing 1 to this undocumented register bit
+	 * disables this feature and restores normal behavior.
+	 */
+	ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04,
+				EHCI_INSNREG04_DISABLE_UNSUSPEND);
+
 	if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
 		(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
 			(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
@@ -659,6 +673,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 		goto err_add_hcd;
 	}
 
+	/* root ports should always stay powered */
+	ehci_port_power(omap->ehci, 1);
+
 	return 0;
 
 err_add_hcd:
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index ead5f4f2aa5..d43d176161a 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -109,6 +109,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		return retval;
 
 	switch (pdev->vendor) {
+	case PCI_VENDOR_ID_NEC:
+		ehci->need_io_watchdog = 0;
+		break;
 	case PCI_VENDOR_ID_INTEL:
 		ehci->need_io_watchdog = 0;
 		if (pdev->device == 0x27cc) {
@@ -284,23 +287,15 @@ static int ehci_pci_suspend(struct usb_hcd *hcd)
 		msleep(10);
 
 	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible, bail out if RH has been resumed. Use
-	 * the spinlock to properly synchronize with possible pending
-	 * RH suspend or resume activity.
-	 *
-	 * This is still racy as hcd->state is manipulated outside of
-	 * any locks =P But that will be a different fix.
+	 * mark HW unaccessible.  The PM and USB cores make sure that
+	 * the root hub is either suspended or stopped.
 	 */
 	spin_lock_irqsave (&ehci->lock, flags);
-	if (hcd->state != HC_STATE_SUSPENDED) {
-		rc = -EINVAL;
-		goto bail;
-	}
+	ehci_prepare_ports_for_controller_suspend(ehci);
 	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
 	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- bail:
 	spin_unlock_irqrestore (&ehci->lock, flags);
 
 	// could save FLADJ in case of Vaux power loss
@@ -330,6 +325,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 				!hibernated) {
 		int	mask = INTR_MASK;
 
+		ehci_prepare_ports_for_controller_resume(ehci);
 		if (!hcd->self.root_hub->do_remote_wakeup)
 			mask &= ~STS_PCD;
 		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 89521775c56..11a79c4f4a9 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -663,7 +663,7 @@ qh_urb_transaction (
 	 */
 	i = urb->num_sgs;
 	if (len > 0 && i > 0) {
-		sg = urb->sg->sg;
+		sg = urb->sg;
 		buf = sg_dma_address(sg);
 
 		/* urb->transfer_buffer_length may be smaller than the
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 556c0b48f3a..650a687f285 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -536,6 +536,16 @@ struct ehci_fstn {
 
 /*-------------------------------------------------------------------------*/
 
+/* Prepare the PORTSC wakeup flags during controller suspend/resume */
+
+#define ehci_prepare_ports_for_controller_suspend(ehci)		\
+		ehci_adjust_port_wakeup_flags(ehci, true);
+
+#define ehci_prepare_ports_for_controller_resume(ehci)		\
+		ehci_adjust_port_wakeup_flags(ehci, false);
+
+/*-------------------------------------------------------------------------*/
+
 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
 
 /*
@@ -556,20 +566,20 @@ ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
 		case 0:
 			return 0;
 		case 1:
-			return (1<<USB_PORT_FEAT_LOWSPEED);
+			return USB_PORT_STAT_LOW_SPEED;
 		case 2:
 		default:
-			return (1<<USB_PORT_FEAT_HIGHSPEED);
+			return USB_PORT_STAT_HIGH_SPEED;
 		}
 	}
-	return (1<<USB_PORT_FEAT_HIGHSPEED);
+	return USB_PORT_STAT_HIGH_SPEED;
 }
 
 #else
 
 #define	ehci_is_TDI(e)			(0)
 
-#define	ehci_port_speed(ehci, portsc)	(1<<USB_PORT_FEAT_HIGHSPEED)
+#define	ehci_port_speed(ehci, portsc)	USB_PORT_STAT_HIGH_SPEED
 #endif
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
index e799f86dab1..6fe55004911 100644
--- a/drivers/usb/host/fhci-dbg.c
+++ b/drivers/usb/host/fhci-dbg.c
@@ -20,7 +20,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 15379c63614..90453379a43 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -25,12 +25,12 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <asm/qe.h>
 #include <asm/fsl_gtm.h>
-#include "../core/hcd.h"
 #include "fhci.h"
 
 void fhci_start_sof_timer(struct fhci_hcd *fhci)
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 0cfaedc3e12..348fe62e94f 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -22,9 +22,9 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/gpio.h>
 #include <asm/qe.h>
-#include "../core/hcd.h"
 #include "fhci.h"
 
 /* virtual root hub specific descriptor */
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
index 5591bfb499d..b0b88f57a5a 100644
--- a/drivers/usb/host/fhci-mem.c
+++ b/drivers/usb/host/fhci-mem.c
@@ -21,7 +21,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 static void init_td(struct td *td)
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
index f73c92359be..03be7494a47 100644
--- a/drivers/usb/host/fhci-q.c
+++ b/drivers/usb/host/fhci-q.c
@@ -22,7 +22,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 /* maps the hardware error code to the USB error code */
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index ff43747a614..4f2cbdcc027 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -24,9 +24,9 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <asm/qe.h>
 #include <asm/fsl_gtm.h>
-#include "../core/hcd.h"
 #include "fhci.h"
 
 static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 57013479d7f..7be548ca218 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -22,7 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/usb.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "fhci.h"
 
 #define DUMMY_BD_BUFFER  0xdeadbeef
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 72dae1c5ab3..71c3caaea4c 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -20,13 +20,14 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/bug.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/kfifo.h>
 #include <linux/io.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <asm/qe.h>
-#include "../core/hcd.h"
 
 #define USB_CLOCK	48000000
 
@@ -515,9 +516,13 @@ static inline int cq_put(struct kfifo *kfifo, void *p)
 
 static inline void *cq_get(struct kfifo *kfifo)
 {
-	void *p = NULL;
+	unsigned int sz;
+	void *p;
+
+	sz = kfifo_out(kfifo, (void *)&p, sizeof(p));
+	if (sz != sizeof(p))
+		return NULL;
 
-	kfifo_out(kfifo, (void *)&p, sizeof(p));
 	return p;
 }
 
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 8a12f297645..ca0e98d8e1f 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -56,8 +56,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 
-#include "../core/hcd.h"
 #include "imx21-hcd.h"
 
 #ifdef DEBUG
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 92de71dc772..d9e82123de2 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -65,6 +65,7 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/usb/isp116x.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -72,7 +73,6 @@
 #include <asm/system.h>
 #include <asm/byteorder.h>
 
-#include "../core/hcd.h"
 #include "isp116x.h"
 
 #define DRIVER_VERSION	"03 Nov 2005"
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 217fb517020..20a0dfe0fe3 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -77,6 +77,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/isp1362.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/io.h>
@@ -95,7 +96,6 @@ module_param(dbg_level, int, 0);
 #define	STUB_DEBUG_FILE
 #endif
 
-#include "../core/hcd.h"
 #include "../core/usb.h"
 #include "isp1362.h"
 
@@ -1265,7 +1265,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd,
 
 	/* don't submit to a dead or disabled port */
 	if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) &
-	      (1 << USB_PORT_FEAT_ENABLE)) ||
+	      USB_PORT_STAT_ENABLE) ||
 	    !HC_IS_RUNNING(hcd->state)) {
 		kfree(ep);
 		retval = -ENODEV;
@@ -2217,7 +2217,7 @@ static void create_debug_file(struct isp1362_hcd *isp1362_hcd)
 static void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
 {
 	if (isp1362_hcd->pde)
-		remove_proc_entry(proc_filename, 0);
+		remove_proc_entry(proc_filename, NULL);
 }
 
 #endif
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9f01293600b..dbcafa29c77 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/debugfs.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
@@ -21,7 +22,6 @@
 #include <asm/unaligned.h>
 #include <asm/cacheflush.h>
 
-#include "../core/hcd.h"
 #include "isp1760-hcd.h"
 
 static struct kmem_cache *qtd_cachep;
@@ -111,7 +111,7 @@ struct isp1760_qh {
 	u32 ping;
 };
 
-#define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED)
+#define ehci_port_speed(priv, portsc) USB_PORT_STAT_HIGH_SPEED
 
 static unsigned int isp1760_readl(__u32 __iomem *regs)
 {
@@ -713,12 +713,11 @@ static int check_error(struct ptd *ptd)
 	u32 dw3;
 
 	dw3 = le32_to_cpu(ptd->dw3);
-	if (dw3 & DW3_HALT_BIT)
+	if (dw3 & DW3_HALT_BIT) {
 		error = -EPIPE;
 
-	if (dw3 & DW3_ERROR_BIT) {
-		printk(KERN_ERR "error bit is set in DW3\n");
-		error = -EPIPE;
+		if (dw3 & DW3_ERROR_BIT)
+			pr_err("error bit is set in DW3\n");
 	}
 
 	if (dw3 & DW3_QTD_ACTIVE) {
@@ -1923,7 +1922,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		 * Even if OWNER is set, so the port is owned by the
 		 * companion controller, khubd needs to be able to clear
 		 * the port-change status bits (especially
-		 * USB_PORT_FEAT_C_CONNECTION).
+		 * USB_PORT_STAT_C_CONNECTION).
 		 */
 
 		switch (wValue) {
@@ -1987,7 +1986,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 
 
 		/* whoever resumes must GetPortStatus to complete it!! */
@@ -2007,7 +2006,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 			/* resume completed? */
 			else if (time_after_eq(jiffies,
 					priv->reset_done)) {
-				status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
 				priv->reset_done = 0;
 
 				/* stop resume signaling */
@@ -2031,7 +2030,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		if ((temp & PORT_RESET)
 				&& time_after_eq(jiffies,
 					priv->reset_done)) {
-			status |= 1 << USB_PORT_FEAT_C_RESET;
+			status |= USB_PORT_STAT_C_RESET << 16;
 			priv->reset_done = 0;
 
 			/* force reset to complete */
@@ -2062,18 +2061,18 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 			printk(KERN_ERR "Warning: PORT_OWNER is set\n");
 
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			/* status may be from integrated TT */
 			status |= ehci_port_speed(priv, temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 		if (temp & (PORT_SUSPEND|PORT_RESUME))
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+			status |= USB_PORT_STAT_SUSPEND;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		break;
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 4293cfd28d6..8f0259eaa2c 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -13,8 +13,8 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/usb/isp1760.h>
+#include <linux/usb/hcd.h>
 
-#include "../core/hcd.h"
 #include "isp1760-hcd.h"
 
 #ifdef CONFIG_PPC_OF
@@ -36,7 +36,7 @@ static int of_isp1760_probe(struct of_device *dev,
 	struct resource memory;
 	struct of_irq oirq;
 	int virq;
-	u64 res_len;
+	resource_size_t res_len;
 	int ret;
 	const unsigned int *prop;
 	unsigned int devflags = 0;
@@ -45,13 +45,12 @@ static int of_isp1760_probe(struct of_device *dev,
 	if (ret)
 		return -ENXIO;
 
-	res = request_mem_region(memory.start, memory.end - memory.start + 1,
-			dev_name(&dev->dev));
+	res_len = resource_size(&memory);
+
+	res = request_mem_region(memory.start, res_len, dev_name(&dev->dev));
 	if (!res)
 		return -EBUSY;
 
-	res_len = memory.end - memory.start + 1;
-
 	if (of_irq_map_one(dp, 0, &oirq)) {
 		ret = -ENODEV;
 		goto release_reg;
@@ -92,7 +91,7 @@ static int of_isp1760_probe(struct of_device *dev,
 	return ret;
 
 release_reg:
-	release_mem_region(memory.start, memory.end - memory.start + 1);
+	release_mem_region(memory.start, res_len);
 	return ret;
 }
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index afe59be2364..fc576557d8a 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/workqueue.h>
@@ -43,7 +44,6 @@
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
 
-#include "../core/hcd.h"
 
 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
@@ -1006,9 +1006,14 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
 
-#ifdef CONFIG_ARCH_OMAP
+#ifdef CONFIG_USB_OHCI_HCD_OMAP1
 #include "ohci-omap.c"
-#define PLATFORM_DRIVER		ohci_hcd_omap_driver
+#define OMAP1_PLATFORM_DRIVER	ohci_hcd_omap_driver
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD_OMAP3
+#include "ohci-omap3.c"
+#define OMAP3_PLATFORM_DRIVER	ohci_hcd_omap3_driver
 #endif
 
 #ifdef CONFIG_ARCH_LH7A404
@@ -1092,6 +1097,8 @@ MODULE_LICENSE ("GPL");
 
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
+	!defined(OMAP1_PLATFORM_DRIVER) &&	\
+	!defined(OMAP3_PLATFORM_DRIVER) &&	\
 	!defined(OF_PLATFORM_DRIVER) &&	\
 	!defined(SA1111_DRIVER) &&	\
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
@@ -1133,6 +1140,18 @@ static int __init ohci_hcd_mod_init(void)
 		goto error_platform;
 #endif
 
+#ifdef OMAP1_PLATFORM_DRIVER
+	retval = platform_driver_register(&OMAP1_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_omap1_platform;
+#endif
+
+#ifdef OMAP3_PLATFORM_DRIVER
+	retval = platform_driver_register(&OMAP3_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_omap3_platform;
+#endif
+
 #ifdef OF_PLATFORM_DRIVER
 	retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
 	if (retval < 0)
@@ -1200,6 +1219,14 @@ static int __init ohci_hcd_mod_init(void)
 	platform_driver_unregister(&PLATFORM_DRIVER);
  error_platform:
 #endif
+#ifdef OMAP1_PLATFORM_DRIVER
+	platform_driver_unregister(&OMAP1_PLATFORM_DRIVER);
+ error_omap1_platform:
+#endif
+#ifdef OMAP3_PLATFORM_DRIVER
+	platform_driver_unregister(&OMAP3_PLATFORM_DRIVER);
+ error_omap3_platform:
+#endif
 #ifdef PS3_SYSTEM_BUS_DRIVER
 	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
  error_ps3:
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
new file mode 100644
index 00000000000..2cc8a504b18
--- /dev/null
+++ b/drivers/usb/host/ohci-omap3.c
@@ -0,0 +1,735 @@
+/*
+ * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
+ *
+ * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
+ * This controller is also used in later OMAPs and AM35x chips
+ *
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
+ * Author: Anand Gadiyar <gadiyar@ti.com>
+ *
+ * Based on ehci-omap.c and some other ohci glue layers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * TODO (last updated Mar 10th, 2010):
+ *	- add kernel-doc
+ *	- Factor out code common to EHCI to a separate file
+ *	- Make EHCI and OHCI coexist together
+ *	  - needs newer silicon versions to actually work
+ *	  - the last one to be loaded currently steps on the other's toes
+ *	- Add hooks for configuring transceivers, etc. at init/exit
+ *	- Add aggressive clock-management code
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <plat/usb.h>
+
+/*
+ * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES
+ *	Use ohci_omap_readl()/ohci_omap_writel() functions
+ */
+
+/* TLL Register Set */
+#define	OMAP_USBTLL_REVISION				(0x00)
+#define	OMAP_USBTLL_SYSCONFIG				(0x10)
+#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_USBTLL_SYSSTATUS				(0x14)
+#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
+
+#define	OMAP_USBTLL_IRQSTATUS				(0x18)
+#define	OMAP_USBTLL_IRQENABLE				(0x1C)
+
+#define	OMAP_TLL_SHARED_CONF				(0x30)
+#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
+#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
+#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
+#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
+#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
+
+#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
+#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
+#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
+#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
+#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
+
+#define OMAP_TLL_CHANNEL_COUNT				3
+
+/* UHH Register Set */
+#define	OMAP_UHH_REVISION				(0x00)
+#define	OMAP_UHH_SYSCONFIG				(0x10)
+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define	OMAP_UHH_SYSSTATUS				(0x14)
+#define OMAP_UHH_SYSSTATUS_UHHRESETDONE			(1 << 0)
+#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE		(1 << 1)
+#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE		(1 << 2)
+#define	OMAP_UHH_HOSTCONFIG				(0x40)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
+
+#define	OMAP_UHH_DEBUG_CSR				(0x44)
+
+/*-------------------------------------------------------------------------*/
+
+static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val)
+{
+	__raw_writel(val, base + reg);
+}
+
+static inline u32 ohci_omap_readl(void __iomem *base, u32 reg)
+{
+	return __raw_readl(base + reg);
+}
+
+static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val)
+{
+	__raw_writeb(val, base + reg);
+}
+
+static inline u8 ohci_omap_readb(void __iomem *base, u8 reg)
+{
+	return __raw_readb(base + reg);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct ohci_hcd_omap3 {
+	struct ohci_hcd		*ohci;
+	struct device		*dev;
+
+	struct clk		*usbhost_ick;
+	struct clk		*usbhost2_120m_fck;
+	struct clk		*usbhost1_48m_fck;
+	struct clk		*usbtll_fck;
+	struct clk		*usbtll_ick;
+
+	/* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */
+	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	void __iomem		*uhh_base;
+	void __iomem		*tll_base;
+	void __iomem		*ohci_base;
+
+	unsigned		es2_compatibility:1;
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on)
+{
+	if (on) {
+		clk_enable(omap->usbtll_ick);
+		clk_enable(omap->usbtll_fck);
+		clk_enable(omap->usbhost_ick);
+		clk_enable(omap->usbhost1_48m_fck);
+		clk_enable(omap->usbhost2_120m_fck);
+	} else {
+		clk_disable(omap->usbhost2_120m_fck);
+		clk_disable(omap->usbhost1_48m_fck);
+		clk_disable(omap->usbhost_ick);
+		clk_disable(omap->usbtll_fck);
+		clk_disable(omap->usbtll_ick);
+	}
+}
+
+static int ohci_omap3_init(struct usb_hcd *hcd)
+{
+	dev_dbg(hcd->self.controller, "starting OHCI controller\n");
+
+	return ohci_init(hcd_to_ohci(hcd));
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_omap3_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	/*
+	 * RemoteWakeupConnected has to be set explicitly before
+	 * calling ohci_run. The reset value of RWC is 0.
+	 */
+	ohci->hc_control = OHCI_CTRL_RWC;
+	writel(OHCI_CTRL_RWC, &ohci->regs->control);
+
+	ret = ohci_run(ohci);
+
+	if (ret < 0) {
+		dev_err(hcd->self.controller, "can't start\n");
+		ohci_stop(hcd);
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * convert the port-mode enum to a value we can use in the FSLSMODE
+ * field of USBTLL_CHANNEL_CONF
+ */
+static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode)
+{
+	switch (mode) {
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+		return 0x0;
+
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+		return 0x1;
+
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+		return 0x2;
+
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+		return 0x3;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+		return 0x4;
+
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		return 0x5;
+
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		return 0x6;
+
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		return 0x7;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+		return 0xA;
+
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		return 0xB;
+	default:
+		pr_warning("Invalid port mode, using default\n");
+		return 0x0;
+	}
+}
+
+static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap)
+{
+	u32 reg;
+	int i;
+
+	/* Program TLL SHARED CONF */
+	reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF);
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
+	reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;
+	reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION;
+	reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON;
+	ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
+
+	/* Program each TLL channel */
+	/*
+	 * REVISIT: Only the 3-pin and 4-pin PHY modes have
+	 * actually been tested.
+	 */
+	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+
+		/* Enable only those channels that are actually used */
+		if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED)
+			continue;
+
+		reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
+		reg |= ohci_omap3_fslsmode(omap->port_mode[i])
+				<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
+		reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
+		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
+		ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
+	}
+}
+
+/* omap3_start_ohci
+ *	- Start the TI USBHOST controller
+ */
+static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	u32 reg = 0;
+	int ret = 0;
+
+	dev_dbg(omap->dev, "starting TI OHCI USB Controller\n");
+
+	/* Get all the clock handles we need */
+	omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
+	if (IS_ERR(omap->usbhost_ick)) {
+		dev_err(omap->dev, "could not get usbhost_ick\n");
+		ret =  PTR_ERR(omap->usbhost_ick);
+		goto err_host_ick;
+	}
+
+	omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
+	if (IS_ERR(omap->usbhost2_120m_fck)) {
+		dev_err(omap->dev, "could not get usbhost_120m_fck\n");
+		ret = PTR_ERR(omap->usbhost2_120m_fck);
+		goto err_host_120m_fck;
+	}
+
+	omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
+	if (IS_ERR(omap->usbhost1_48m_fck)) {
+		dev_err(omap->dev, "could not get usbhost_48m_fck\n");
+		ret = PTR_ERR(omap->usbhost1_48m_fck);
+		goto err_host_48m_fck;
+	}
+
+	omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
+	if (IS_ERR(omap->usbtll_fck)) {
+		dev_err(omap->dev, "could not get usbtll_fck\n");
+		ret = PTR_ERR(omap->usbtll_fck);
+		goto err_tll_fck;
+	}
+
+	omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick");
+	if (IS_ERR(omap->usbtll_ick)) {
+		dev_err(omap->dev, "could not get usbtll_ick\n");
+		ret = PTR_ERR(omap->usbtll_ick);
+		goto err_tll_ick;
+	}
+
+	/* Now enable all the clocks in the correct order */
+	ohci_omap3_clock_power(omap, 1);
+
+	/* perform TLL soft reset, and wait until reset is complete */
+	ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
+
+	/* Wait for TLL reset to complete */
+	while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout)) {
+			dev_dbg(omap->dev, "operation timed out\n");
+			ret = -EINVAL;
+			goto err_sys_status;
+		}
+	}
+
+	dev_dbg(omap->dev, "TLL reset done\n");
+
+	/* (1<<3) = no idle mode only for initial debugging */
+	ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+			OMAP_USBTLL_SYSCONFIG_CACTIVITY);
+
+
+	/* Put UHH in NoIdle/NoStandby mode */
+	reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+	reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+			| OMAP_UHH_SYSCONFIG_SIDLEMODE
+			| OMAP_UHH_SYSCONFIG_CACTIVITY
+			| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+	reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+	reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET;
+
+	ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
+
+	reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
+
+	/* setup ULPI bypass and burst configurations */
+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
+
+	/*
+	 * REVISIT: Pi_CONNECT_STATUS controls MStandby
+	 * assertion and Swakeup generation - let us not
+	 * worry about this for now. OMAP HWMOD framework
+	 * might take care of this later. If not, we can
+	 * update these registers when adding aggressive
+	 * clock management code.
+	 *
+	 * For now, turn off all the Pi_CONNECT_STATUS bits
+	 *
+	if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+	if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+	if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+	 */
+	reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+	reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+	reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+	 if (omap->es2_compatibility) {
+		/*
+		 * All OHCI modes need to go through the TLL,
+		 * unlike in the EHCI case. So use UTMI mode
+		 * for all ports for OHCI, on ES2.x silicon
+		 */
+		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
+		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+	} else {
+		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+		if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+		else
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+		if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+		else
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+		if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		else
+			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+
+	}
+	ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
+	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
+
+	ohci_omap3_tll_config(omap);
+
+	return 0;
+
+err_sys_status:
+	ohci_omap3_clock_power(omap, 0);
+	clk_put(omap->usbtll_ick);
+
+err_tll_ick:
+	clk_put(omap->usbtll_fck);
+
+err_tll_fck:
+	clk_put(omap->usbhost1_48m_fck);
+
+err_host_48m_fck:
+	clk_put(omap->usbhost2_120m_fck);
+
+err_host_120m_fck:
+	clk_put(omap->usbhost_ick);
+
+err_host_ick:
+	return ret;
+}
+
+static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+	dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n");
+
+	/* Reset USBHOST for insmod/rmmod to work */
+	ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			OMAP_UHH_SYSCONFIG_SOFTRESET);
+	while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& OMAP_UHH_SYSSTATUS_UHHRESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
+				& OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
+
+	while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+				& (1 << 0))) {
+		cpu_relax();
+
+		if (time_after(jiffies, timeout))
+			dev_dbg(omap->dev, "operation timed out\n");
+	}
+
+	ohci_omap3_clock_power(omap, 0);
+
+	if (omap->usbtll_fck != NULL) {
+		clk_put(omap->usbtll_fck);
+		omap->usbtll_fck = NULL;
+	}
+
+	if (omap->usbhost_ick != NULL) {
+		clk_put(omap->usbhost_ick);
+		omap->usbhost_ick = NULL;
+	}
+
+	if (omap->usbhost1_48m_fck != NULL) {
+		clk_put(omap->usbhost1_48m_fck);
+		omap->usbhost1_48m_fck = NULL;
+	}
+
+	if (omap->usbhost2_120m_fck != NULL) {
+		clk_put(omap->usbhost2_120m_fck);
+		omap->usbhost2_120m_fck = NULL;
+	}
+
+	if (omap->usbtll_ick != NULL) {
+		clk_put(omap->usbtll_ick);
+		omap->usbtll_ick = NULL;
+	}
+
+	dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_omap3_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"OMAP3 OHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		ohci_omap3_init,
+	.start =		ohci_omap3_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * configure so an HC device and id are always provided
+ * always called with process context; sleeping is OK
+ */
+
+/**
+ * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
+{
+	struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+	struct ohci_hcd_omap3 *omap;
+	struct resource *res;
+	struct usb_hcd *hcd;
+	int ret = -ENODEV;
+	int irq;
+
+	if (usb_disabled())
+		goto err_disabled;
+
+	if (!pdata) {
+		dev_dbg(&pdev->dev, "missing platform_data\n");
+		goto err_pdata;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		ret = -ENOMEM;
+		goto err_disabled;
+	}
+
+	hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev,
+			dev_name(&pdev->dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto err_create_hcd;
+	}
+
+	platform_set_drvdata(pdev, omap);
+	omap->dev		= &pdev->dev;
+	omap->port_mode[0]	= pdata->port_mode[0];
+	omap->port_mode[1]	= pdata->port_mode[1];
+	omap->port_mode[2]	= pdata->port_mode[2];
+	omap->es2_compatibility	= pdata->es2_compatibility;
+	omap->ohci		= hcd_to_ohci(hcd);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "OHCI ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	omap->uhh_base = ioremap(res->start, resource_size(res));
+	if (!omap->uhh_base) {
+		dev_err(&pdev->dev, "UHH ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_uhh_ioremap;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	omap->tll_base = ioremap(res->start, resource_size(res));
+	if (!omap->tll_base) {
+		dev_err(&pdev->dev, "TLL ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_tll_ioremap;
+	}
+
+	ret = omap3_start_ohci(omap, hcd);
+	if (ret) {
+		dev_dbg(&pdev->dev, "failed to start ehci\n");
+		goto err_start;
+	}
+
+	ohci_hcd_init(omap->ohci);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (ret) {
+		dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+		goto err_add_hcd;
+	}
+
+	return 0;
+
+err_add_hcd:
+	omap3_stop_ohci(omap, hcd);
+
+err_start:
+	iounmap(omap->tll_base);
+
+err_tll_ioremap:
+	iounmap(omap->uhh_base);
+
+err_uhh_ioremap:
+	iounmap(hcd->regs);
+
+err_ioremap:
+	usb_put_hcd(hcd);
+
+err_create_hcd:
+	kfree(omap);
+err_pdata:
+err_disabled:
+	return ret;
+}
+
+/*
+ * may be called without controller electrically present
+ * may be called with controller, bus, and devices active
+ */
+
+/**
+ * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev)
+{
+	struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ohci_to_hcd(omap->ohci);
+
+	usb_remove_hcd(hcd);
+	omap3_stop_ohci(omap, hcd);
+	iounmap(hcd->regs);
+	iounmap(omap->tll_base);
+	iounmap(omap->uhh_base);
+	usb_put_hcd(hcd);
+	kfree(omap);
+
+	return 0;
+}
+
+static void ohci_hcd_omap3_shutdown(struct platform_device *pdev)
+{
+	struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = ohci_to_hcd(omap->ohci);
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ohci_hcd_omap3_driver = {
+	.probe		= ohci_hcd_omap3_probe,
+	.remove		= __devexit_p(ohci_hcd_omap3_remove),
+	.shutdown	= ohci_hcd_omap3_shutdown,
+	.driver		= {
+		.name	= "ohci-omap3",
+	},
+};
+
+MODULE_ALIAS("platform:ohci-omap3");
+MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>");
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index e62b30b3e42..f608dfd09a8 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -34,12 +34,11 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/moduleparam.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 
-#include "../core/hcd.h"
-
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
@@ -3154,10 +3153,10 @@ static inline unsigned int oxu_port_speed(struct oxu_hcd *oxu,
 	case 0:
 		return 0;
 	case 1:
-		return 1 << USB_PORT_FEAT_LOWSPEED;
+		return USB_PORT_STAT_LOW_SPEED;
 	case 2:
 	default:
-		return 1 << USB_PORT_FEAT_HIGHSPEED;
+		return USB_PORT_STAT_HIGH_SPEED;
 	}
 }
 
@@ -3202,7 +3201,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		 * Even if OWNER is set, so the port is owned by the
 		 * companion controller, khubd needs to be able to clear
 		 * the port-change status bits (especially
-		 * USB_PORT_FEAT_C_CONNECTION).
+		 * USB_PORT_STAT_C_CONNECTION).
 		 */
 
 		switch (wValue) {
@@ -3264,11 +3263,11 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 		if (temp & PORT_PEC)
-			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+			status |= USB_PORT_STAT_C_ENABLE << 16;
 		if ((temp & PORT_OCC) && !ignore_oc)
-			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
 		/* whoever resumes must GetPortStatus to complete it!! */
 		if (temp & PORT_RESUME) {
@@ -3286,7 +3285,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 			/* resume completed? */
 			else if (time_after_eq(jiffies,
 					oxu->reset_done[wIndex])) {
-				status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
 				oxu->reset_done[wIndex] = 0;
 
 				/* stop resume signaling */
@@ -3309,7 +3308,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		if ((temp & PORT_RESET)
 				&& time_after_eq(jiffies,
 					oxu->reset_done[wIndex])) {
-			status |= 1 << USB_PORT_FEAT_C_RESET;
+			status |= USB_PORT_STAT_C_RESET << 16;
 			oxu->reset_done[wIndex] = 0;
 
 			/* force reset to complete */
@@ -3348,20 +3347,20 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		 */
 
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			/* status may be from integrated TT */
 			status |= oxu_port_speed(oxu, temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 		if (temp & (PORT_SUSPEND|PORT_RESUME))
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+			status |= USB_PORT_STAT_SUSPEND;
 		if (temp & PORT_OC)
-			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 
 #ifndef	OXU_VERBOSE_DEBUG
 	if (status & ~0xffff)	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d478ffad59b..6db57ab6079 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -33,6 +33,7 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mm.h>
@@ -40,7 +41,6 @@
 #include <linux/slab.h>
 #include <asm/cacheflush.h>
 
-#include "../core/hcd.h"
 #include "r8a66597.h"
 
 MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver");
@@ -1018,10 +1018,10 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
 	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
 	rh->scount = R8A66597_MAX_SAMPLING;
 	if (connect)
-		rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+		rh->port |= USB_PORT_STAT_CONNECTION;
 	else
-		rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-	rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+		rh->port &= ~USB_PORT_STAT_CONNECTION;
+	rh->port |= USB_PORT_STAT_C_CONNECTION << 16;
 
 	r8a66597_root_hub_start_polling(r8a66597);
 }
@@ -1059,15 +1059,14 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
 	u16 speed = get_rh_usb_speed(r8a66597, port);
 	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
-	rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) |
-		      (1 << USB_PORT_FEAT_LOWSPEED));
+	rh->port &= ~(USB_PORT_STAT_HIGH_SPEED | USB_PORT_STAT_LOW_SPEED);
 	if (speed == HSMODE)
-		rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED);
+		rh->port |= USB_PORT_STAT_HIGH_SPEED;
 	else if (speed == LSMODE)
-		rh->port |= (1 << USB_PORT_FEAT_LOWSPEED);
+		rh->port |= USB_PORT_STAT_LOW_SPEED;
 
-	rh->port &= ~(1 << USB_PORT_FEAT_RESET);
-	rh->port |= 1 << USB_PORT_FEAT_ENABLE;
+	rh->port &= USB_PORT_STAT_RESET;
+	rh->port |= USB_PORT_STAT_ENABLE;
 }
 
 /* this function must be called with interrupt disabled */
@@ -1706,7 +1705,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
 	u16 tmp;
 	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
-	if (rh->port & (1 << USB_PORT_FEAT_RESET)) {
+	if (rh->port & USB_PORT_STAT_RESET) {
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
 		tmp = r8a66597_read(r8a66597, dvstctr_reg);
@@ -1718,7 +1717,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
 			r8a66597_usb_connect(r8a66597, port);
 	}
 
-	if (!(rh->port & (1 << USB_PORT_FEAT_CONNECTION))) {
+	if (!(rh->port & USB_PORT_STAT_CONNECTION)) {
 		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
 		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
 	}
@@ -2186,7 +2185,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			rh->port &= ~(1 << USB_PORT_FEAT_POWER);
+			rh->port &= ~USB_PORT_STAT_POWER;
 			break;
 		case USB_PORT_FEAT_SUSPEND:
 			break;
@@ -2227,12 +2226,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			break;
 		case USB_PORT_FEAT_POWER:
 			r8a66597_port_power(r8a66597, port, 1);
-			rh->port |= (1 << USB_PORT_FEAT_POWER);
+			rh->port |= USB_PORT_STAT_POWER;
 			break;
 		case USB_PORT_FEAT_RESET: {
 			struct r8a66597_device *dev = rh->dev;
 
-			rh->port |= (1 << USB_PORT_FEAT_RESET);
+			rh->port |= USB_PORT_STAT_RESET;
 
 			disable_r8a66597_pipe_all(r8a66597, dev);
 			free_usb_address(r8a66597, dev, 1);
@@ -2270,12 +2269,12 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-		if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE)))
+		if (!(rh->port & USB_PORT_STAT_ENABLE))
 			continue;
 
 		dbg("suspend port = %d", port);
 		r8a66597_bclr(r8a66597, UACT, dvstctr_reg);	/* suspend */
-		rh->port |= 1 << USB_PORT_FEAT_SUSPEND;
+		rh->port |= USB_PORT_STAT_SUSPEND;
 
 		if (rh->dev->udev->do_remote_wakeup) {
 			msleep(3);	/* waiting last SOF */
@@ -2301,12 +2300,12 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-		if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND)))
+		if (!(rh->port & USB_PORT_STAT_SUSPEND))
 			continue;
 
 		dbg("resume port = %d", port);
-		rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND);
-		rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND;
+		rh->port &= ~USB_PORT_STAT_SUSPEND;
+		rh->port |= USB_PORT_STAT_C_SUSPEND < 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
 		msleep(50);
 		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 3b867a8af7b..bcf9f0e809d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -45,6 +45,7 @@
 #include <linux/interrupt.h>
 #include <linux/usb.h>
 #include <linux/usb/sl811.h>
+#include <linux/usb/hcd.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -53,7 +54,6 @@
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
-#include "../core/hcd.h"
 #include "sl811.h"
 
 
@@ -90,10 +90,10 @@ static void port_power(struct sl811 *sl811, int is_on)
 
 	/* hub is inactive unless the port is powered */
 	if (is_on) {
-		if (sl811->port1 & (1 << USB_PORT_FEAT_POWER))
+		if (sl811->port1 & USB_PORT_STAT_POWER)
 			return;
 
-		sl811->port1 = (1 << USB_PORT_FEAT_POWER);
+		sl811->port1 = USB_PORT_STAT_POWER;
 		sl811->irq_enable = SL11H_INTMASK_INSRMV;
 	} else {
 		sl811->port1 = 0;
@@ -407,7 +407,7 @@ static struct sl811h_ep	*start(struct sl811 *sl811, u8 bank)
 
 static inline void start_transfer(struct sl811 *sl811)
 {
-	if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+	if (sl811->port1 & USB_PORT_STAT_SUSPEND)
 		return;
 	if (sl811->active_a == NULL) {
 		sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF));
@@ -721,23 +721,23 @@ retry:
 		 * force the reset and make khubd clean up later.
 		 */
 		if (irqstat & SL11H_INTMASK_RD)
-			sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+			sl811->port1 &= ~USB_PORT_STAT_CONNECTION;
 		else
-			sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+			sl811->port1 |= USB_PORT_STAT_CONNECTION;
 
-		sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
+		sl811->port1 |= USB_PORT_STAT_C_CONNECTION << 16;
 
 	} else if (irqstat & SL11H_INTMASK_RD) {
-		if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
+		if (sl811->port1 & USB_PORT_STAT_SUSPEND) {
 			DBG("wakeup\n");
-			sl811->port1 |= 1 << USB_PORT_FEAT_C_SUSPEND;
+			sl811->port1 |= USB_PORT_STAT_C_SUSPEND << 16;
 			sl811->stat_wake++;
 		} else
 			irqstat &= ~SL11H_INTMASK_RD;
 	}
 
 	if (irqstat) {
-		if (sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+		if (sl811->port1 & USB_PORT_STAT_ENABLE)
 			start_transfer(sl811);
 		ret = IRQ_HANDLED;
 		if (retries--)
@@ -819,7 +819,7 @@ static int sl811h_urb_enqueue(
 	spin_lock_irqsave(&sl811->lock, flags);
 
 	/* don't submit to a dead or disabled port */
-	if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+	if (!(sl811->port1 & USB_PORT_STAT_ENABLE)
 			|| !HC_IS_RUNNING(hcd->state)) {
 		retval = -ENODEV;
 		kfree(ep);
@@ -1119,9 +1119,9 @@ sl811h_timer(unsigned long _sl811)
 	unsigned long	flags;
 	u8		irqstat;
 	u8		signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE;
-	const u32	mask = (1 << USB_PORT_FEAT_CONNECTION)
-				| (1 << USB_PORT_FEAT_ENABLE)
-				| (1 << USB_PORT_FEAT_LOWSPEED);
+	const u32	mask = USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
+				| USB_PORT_STAT_LOW_SPEED;
 
 	spin_lock_irqsave(&sl811->lock, flags);
 
@@ -1135,8 +1135,8 @@ sl811h_timer(unsigned long _sl811)
 	switch (signaling) {
 	case SL11H_CTL1MASK_SE0:
 		DBG("end reset\n");
-		sl811->port1 = (1 << USB_PORT_FEAT_C_RESET)
-				| (1 << USB_PORT_FEAT_POWER);
+		sl811->port1 = (USB_PORT_STAT_C_RESET << 16)
+				 | USB_PORT_STAT_POWER;
 		sl811->ctrl1 = 0;
 		/* don't wrongly ack RD */
 		if (irqstat & SL11H_INTMASK_INSRMV)
@@ -1144,7 +1144,7 @@ sl811h_timer(unsigned long _sl811)
 		break;
 	case SL11H_CTL1MASK_K:
 		DBG("end resume\n");
-		sl811->port1 &= ~(1 << USB_PORT_FEAT_SUSPEND);
+		sl811->port1 &= ~USB_PORT_STAT_SUSPEND;
 		break;
 	default:
 		DBG("odd timer signaling: %02x\n", signaling);
@@ -1154,26 +1154,26 @@ sl811h_timer(unsigned long _sl811)
 
 	if (irqstat & SL11H_INTMASK_RD) {
 		/* usbcore nukes all pending transactions on disconnect */
-		if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION))
-			sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
-					| (1 << USB_PORT_FEAT_C_ENABLE);
+		if (sl811->port1 & USB_PORT_STAT_CONNECTION)
+			sl811->port1 |= (USB_PORT_STAT_C_CONNECTION << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
 		sl811->port1 &= ~mask;
 		sl811->irq_enable = SL11H_INTMASK_INSRMV;
 	} else {
 		sl811->port1 |= mask;
 		if (irqstat & SL11H_INTMASK_DP)
-			sl811->port1 &= ~(1 << USB_PORT_FEAT_LOWSPEED);
+			sl811->port1 &= ~USB_PORT_STAT_LOW_SPEED;
 		sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD;
 	}
 
-	if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) {
+	if (sl811->port1 & USB_PORT_STAT_CONNECTION) {
 		u8	ctrl2 = SL811HS_CTL2_INIT;
 
 		sl811->irq_enable |= SL11H_INTMASK_DONE_A;
 #ifdef USE_B
 		sl811->irq_enable |= SL11H_INTMASK_DONE_B;
 #endif
-		if (sl811->port1 & (1 << USB_PORT_FEAT_LOWSPEED)) {
+		if (sl811->port1 & USB_PORT_STAT_LOW_SPEED) {
 			sl811->ctrl1 |= SL11H_CTL1MASK_LSPD;
 			ctrl2 |= SL811HS_CTL2MASK_DSWAP;
 		}
@@ -1233,7 +1233,7 @@ sl811h_hub_control(
 
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			sl811->port1 &= (1 << USB_PORT_FEAT_POWER);
+			sl811->port1 &= USB_PORT_STAT_POWER;
 			sl811->ctrl1 = 0;
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
 			sl811->irq_enable = SL11H_INTMASK_INSRMV;
@@ -1241,7 +1241,7 @@ sl811h_hub_control(
 						sl811->irq_enable);
 			break;
 		case USB_PORT_FEAT_SUSPEND:
-			if (!(sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)))
+			if (!(sl811->port1 & USB_PORT_STAT_SUSPEND))
 				break;
 
 			/* 20 msec of resume/K signaling, other irqs blocked */
@@ -1290,9 +1290,9 @@ sl811h_hub_control(
 			goto error;
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			if (sl811->port1 & (1 << USB_PORT_FEAT_RESET))
+			if (sl811->port1 & USB_PORT_STAT_RESET)
 				goto error;
-			if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)))
+			if (!(sl811->port1 & USB_PORT_STAT_ENABLE))
 				goto error;
 
 			DBG("suspend...\n");
@@ -1303,9 +1303,9 @@ sl811h_hub_control(
 			port_power(sl811, 1);
 			break;
 		case USB_PORT_FEAT_RESET:
-			if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+			if (sl811->port1 & USB_PORT_STAT_SUSPEND)
 				goto error;
-			if (!(sl811->port1 & (1 << USB_PORT_FEAT_POWER)))
+			if (!(sl811->port1 & USB_PORT_STAT_POWER))
 				break;
 
 			/* 50 msec of reset/SE0 signaling, irqs blocked */
@@ -1314,7 +1314,7 @@ sl811h_hub_control(
 						sl811->irq_enable);
 			sl811->ctrl1 = SL11H_CTL1MASK_SE0;
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
-			sl811->port1 |= (1 << USB_PORT_FEAT_RESET);
+			sl811->port1 |= USB_PORT_STAT_RESET;
 			mod_timer(&sl811->timer, jiffies
 					+ msecs_to_jiffies(50));
 			break;
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 228f2b070f2..5b31bae92db 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -49,6 +49,7 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
@@ -56,7 +57,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/byteorder.h>
-#include "../core/hcd.h"
 
 	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
 	 * If you're going to try stuff like this, you need to split
@@ -1446,9 +1446,9 @@ static void u132_hcd_endp_work_scheduler(struct work_struct *work)
 			return;
 		} else {
 			int retval;
-			u8 address = u132->addr[endp->usb_addr].address;
 			struct urb *urb = endp->urb_list[ENDP_QUEUE_MASK &
 				endp->queue_next];
+			address = u132->addr[endp->usb_addr].address;
 			endp->active = 1;
 			ring->curr_endp = endp;
 			ring->in_use = 1;
@@ -3120,8 +3120,8 @@ static int __devinit u132_probe(struct platform_device *pdev)
 		ftdi_elan_gone_away(pdev);
 		return -ENOMEM;
 	} else {
-		int retval = 0;
 		struct u132 *u132 = hcd_to_u132(hcd);
+		retval = 0;
 		hcd->rsrc_start = 0;
 		mutex_lock(&u132_module_lock);
 		list_add_tail(&u132->u132_list, &u132_static_list);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 09197067fe6..6637e52736d 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -38,6 +38,7 @@
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/bitops.h>
 #include <linux/dmi.h>
 
@@ -46,7 +47,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 
-#include "../core/hcd.h"
 #include "uhci-hcd.h"
 #include "pci-quirks.h"
 
diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c
index c5305b599ca..767af265e00 100644
--- a/drivers/usb/host/whci/debug.c
+++ b/drivers/usb/host/whci/debug.c
@@ -30,7 +30,7 @@ struct whc_dbg {
 	struct dentry *pzl_f;
 };
 
-void qset_print(struct seq_file *s, struct whc_qset *qset)
+static void qset_print(struct seq_file *s, struct whc_qset *qset)
 {
 	static const char *qh_type[] = {
 		"ctrl", "isoc", "bulk", "intr", "rsvd", "rsvd", "rsvd", "lpintr", };
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 141d049beb3..ab5a14fbfee 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -443,7 +443,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u
 
 	remaining = urb->transfer_buffer_length;
 
-	for_each_sg(urb->sg->sg, sg, urb->num_sgs, i) {
+	for_each_sg(urb->sg, sg, urb->num_sgs, i) {
 		dma_addr_t dma_addr;
 		size_t dma_remaining;
 		dma_addr_t sp, ep;
@@ -561,7 +561,7 @@ static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset,
 
 	remaining = urb->transfer_buffer_length;
 
-	for_each_sg(urb->sg->sg, sg, urb->sg->nents, i) {
+	for_each_sg(urb->sg, sg, urb->num_sgs, i) {
 		size_t len;
 		size_t sg_remaining;
 		void *orig;
@@ -646,7 +646,7 @@ int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
 	wurb->urb = urb;
 	INIT_WORK(&wurb->dequeue_work, urb_dequeue_work);
 
-	if (urb->sg) {
+	if (urb->num_sgs) {
 		ret = qset_add_urb_sg(whc, qset, urb, mem_flags);
 		if (ret == -EINVAL) {
 			qset_free_stds(qset, urb);
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 105fa8b025b..fcbf4abbf38 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -364,6 +364,30 @@ void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring)
 		xhci_debug_segment(xhci, seg);
 }
 
+void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_virt_ep *ep)
+{
+	int i;
+	struct xhci_ring *ring;
+
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		for (i = 1; i < ep->stream_info->num_streams; i++) {
+			ring = ep->stream_info->stream_rings[i];
+			xhci_dbg(xhci, "Dev %d endpoint %d stream ID %d:\n",
+				slot_id, ep_index, i);
+			xhci_debug_segment(xhci, ring->deq_seg);
+		}
+	} else {
+		ring = ep->ring;
+		if (!ring)
+			return;
+		xhci_dbg(xhci, "Dev %d endpoint ring %d:\n",
+				slot_id, ep_index);
+		xhci_debug_segment(xhci, ring->deq_seg);
+	}
+}
+
 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 {
 	u32 addr = (u32) erst->erst_dma_addr;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 208b805b80e..a1a7a979553 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -64,15 +64,15 @@ static void xhci_hub_descriptor(struct xhci_hcd *xhci,
 static unsigned int xhci_port_speed(unsigned int port_status)
 {
 	if (DEV_LOWSPEED(port_status))
-		return 1 << USB_PORT_FEAT_LOWSPEED;
+		return USB_PORT_STAT_LOW_SPEED;
 	if (DEV_HIGHSPEED(port_status))
-		return 1 << USB_PORT_FEAT_HIGHSPEED;
+		return USB_PORT_STAT_HIGH_SPEED;
 	if (DEV_SUPERSPEED(port_status))
-		return 1 << USB_PORT_FEAT_SUPERSPEED;
+		return USB_PORT_STAT_SUPER_SPEED;
 	/*
 	 * FIXME: Yes, we should check for full speed, but the core uses that as
 	 * a default in portspeed() in usb/core/hub.c (which is the only place
-	 * USB_PORT_FEAT_*SPEED is used).
+	 * USB_PORT_STAT_*_SPEED is used).
 	 */
 	return 0;
 }
@@ -205,27 +205,27 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 		if (temp & PORT_PEC)
-			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+			status |= USB_PORT_STAT_C_ENABLE << 16;
 		if ((temp & PORT_OCC))
-			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 		/*
 		 * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
 		 * changes
 		 */
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			status |= xhci_port_speed(temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 		if (temp & PORT_OC)
-			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 		xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		break;
@@ -298,7 +298,6 @@ error:
  * Returns 0 if the status hasn't changed, or the number of bytes in buf.
  * Ports are 0-indexed from the HCD point of view,
  * and 1-indexed from the USB core pointer of view.
- * xHCI instances can have up to 127 ports, so FIXME if you see more than 15.
  *
  * Note that the status change bits will be cleared as soon as a port status
  * change event is generated, so we use the saved status from that event.
@@ -315,14 +314,9 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	ports = HCS_MAX_PORTS(xhci->hcs_params1);
 
 	/* Initial status is no changes */
-	buf[0] = 0;
+	retval = (ports + 8) / 8;
+	memset(buf, 0, retval);
 	status = 0;
-	if (ports > 7) {
-		buf[1] = 0;
-		retval = 2;
-	} else {
-		retval = 1;
-	}
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
@@ -331,10 +325,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 			NUM_PORT_REGS*i;
 		temp = xhci_readl(xhci, addr);
 		if (temp & (PORT_CSC | PORT_PEC | PORT_OCC)) {
-			if (i < 7)
-				buf[0] |= 1 << (i + 1);
-			else
-				buf[1] |= 1 << (i - 7);
+			buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
 			status = 1;
 		}
 	}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d64f5724bfc..fd9e03afd91 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -41,13 +41,13 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, gfp_t flag
 
 	seg = kzalloc(sizeof *seg, flags);
 	if (!seg)
-		return 0;
+		return NULL;
 	xhci_dbg(xhci, "Allocating priv segment structure at %p\n", seg);
 
 	seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
 	if (!seg->trbs) {
 		kfree(seg);
-		return 0;
+		return NULL;
 	}
 	xhci_dbg(xhci, "// Allocating segment at %p (virtual) 0x%llx (DMA)\n",
 			seg->trbs, (unsigned long long)dma);
@@ -159,7 +159,7 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 	ring = kzalloc(sizeof *(ring), flags);
 	xhci_dbg(xhci, "Allocating ring at %p\n", ring);
 	if (!ring)
-		return 0;
+		return NULL;
 
 	INIT_LIST_HEAD(&ring->td_list);
 	if (num_segs == 0)
@@ -196,7 +196,7 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
 
 fail:
 	xhci_ring_free(xhci, ring);
-	return 0;
+	return NULL;
 }
 
 void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
@@ -247,7 +247,7 @@ static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
 
 #define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
 
-struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
 						    int type, gfp_t flags)
 {
 	struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
@@ -265,7 +265,7 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
 	return ctx;
 }
 
-void xhci_free_container_ctx(struct xhci_hcd *xhci,
+static void xhci_free_container_ctx(struct xhci_hcd *xhci,
 			     struct xhci_container_ctx *ctx)
 {
 	if (!ctx)
@@ -304,6 +304,422 @@ struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
 		(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
 }
 
+
+/***************** Streams structures manipulation *************************/
+
+void xhci_free_stream_ctx(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs,
+		struct xhci_stream_ctx *stream_ctx, dma_addr_t dma)
+{
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
+		pci_free_consistent(pdev,
+				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
+				stream_ctx, dma);
+	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
+		return dma_pool_free(xhci->small_streams_pool,
+				stream_ctx, dma);
+	else
+		return dma_pool_free(xhci->medium_streams_pool,
+				stream_ctx, dma);
+}
+
+/*
+ * The stream context array for each endpoint with bulk streams enabled can
+ * vary in size, based on:
+ *  - how many streams the endpoint supports,
+ *  - the maximum primary stream array size the host controller supports,
+ *  - and how many streams the device driver asks for.
+ *
+ * The stream context array must be a power of 2, and can be as small as
+ * 64 bytes or as large as 1MB.
+ */
+struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs, dma_addr_t *dma,
+		gfp_t mem_flags)
+{
+	struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE)
+		return pci_alloc_consistent(pdev,
+				sizeof(struct xhci_stream_ctx)*num_stream_ctxs,
+				dma);
+	else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE)
+		return dma_pool_alloc(xhci->small_streams_pool,
+				mem_flags, dma);
+	else
+		return dma_pool_alloc(xhci->medium_streams_pool,
+				mem_flags, dma);
+}
+
+struct xhci_ring *xhci_dma_to_transfer_ring(
+		struct xhci_virt_ep *ep,
+		u64 address)
+{
+	if (ep->ep_state & EP_HAS_STREAMS)
+		return radix_tree_lookup(&ep->stream_info->trb_address_map,
+				address >> SEGMENT_SHIFT);
+	return ep->ring;
+}
+
+/* Only use this when you know stream_info is valid */
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+static struct xhci_ring *dma_to_stream_ring(
+		struct xhci_stream_info *stream_info,
+		u64 address)
+{
+	return radix_tree_lookup(&stream_info->trb_address_map,
+			address >> SEGMENT_SHIFT);
+}
+#endif	/* CONFIG_USB_XHCI_HCD_DEBUGGING */
+
+struct xhci_ring *xhci_stream_id_to_ring(
+		struct xhci_virt_device *dev,
+		unsigned int ep_index,
+		unsigned int stream_id)
+{
+	struct xhci_virt_ep *ep = &dev->eps[ep_index];
+
+	if (stream_id == 0)
+		return ep->ring;
+	if (!ep->stream_info)
+		return NULL;
+
+	if (stream_id > ep->stream_info->num_streams)
+		return NULL;
+	return ep->stream_info->stream_rings[stream_id];
+}
+
+struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id)
+{
+	struct xhci_virt_ep *ep;
+
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+	/* Common case: no streams */
+	if (!(ep->ep_state & EP_HAS_STREAMS))
+		return ep->ring;
+
+	if (stream_id == 0) {
+		xhci_warn(xhci,
+				"WARN: Slot ID %u, ep index %u has streams, "
+				"but URB has no stream ID.\n",
+				slot_id, ep_index);
+		return NULL;
+	}
+
+	if (stream_id < ep->stream_info->num_streams)
+		return ep->stream_info->stream_rings[stream_id];
+
+	xhci_warn(xhci,
+			"WARN: Slot ID %u, ep index %u has "
+			"stream IDs 1 to %u allocated, "
+			"but stream ID %u is requested.\n",
+			slot_id, ep_index,
+			ep->stream_info->num_streams - 1,
+			stream_id);
+	return NULL;
+}
+
+/* Get the right ring for the given URB.
+ * If the endpoint supports streams, boundary check the URB's stream ID.
+ * If the endpoint doesn't support streams, return the singular endpoint ring.
+ */
+struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+		struct urb *urb)
+{
+	return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
+		xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
+}
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+static int xhci_test_radix_tree(struct xhci_hcd *xhci,
+		unsigned int num_streams,
+		struct xhci_stream_info *stream_info)
+{
+	u32 cur_stream;
+	struct xhci_ring *cur_ring;
+	u64 addr;
+
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		struct xhci_ring *mapped_ring;
+		int trb_size = sizeof(union xhci_trb);
+
+		cur_ring = stream_info->stream_rings[cur_stream];
+		for (addr = cur_ring->first_seg->dma;
+				addr < cur_ring->first_seg->dma + SEGMENT_SIZE;
+				addr += trb_size) {
+			mapped_ring = dma_to_stream_ring(stream_info, addr);
+			if (cur_ring != mapped_ring) {
+				xhci_warn(xhci, "WARN: DMA address 0x%08llx "
+						"didn't map to stream ID %u; "
+						"mapped to ring %p\n",
+						(unsigned long long) addr,
+						cur_stream,
+						mapped_ring);
+				return -EINVAL;
+			}
+		}
+		/* One TRB after the end of the ring segment shouldn't return a
+		 * pointer to the current ring (although it may be a part of a
+		 * different ring).
+		 */
+		mapped_ring = dma_to_stream_ring(stream_info, addr);
+		if (mapped_ring != cur_ring) {
+			/* One TRB before should also fail */
+			addr = cur_ring->first_seg->dma - trb_size;
+			mapped_ring = dma_to_stream_ring(stream_info, addr);
+		}
+		if (mapped_ring == cur_ring) {
+			xhci_warn(xhci, "WARN: Bad DMA address 0x%08llx "
+					"mapped to valid stream ID %u; "
+					"mapped ring = %p\n",
+					(unsigned long long) addr,
+					cur_stream,
+					mapped_ring);
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+#endif	/* CONFIG_USB_XHCI_HCD_DEBUGGING */
+
+/*
+ * Change an endpoint's internal structure so it supports stream IDs.  The
+ * number of requested streams includes stream 0, which cannot be used by device
+ * drivers.
+ *
+ * The number of stream contexts in the stream context array may be bigger than
+ * the number of streams the driver wants to use.  This is because the number of
+ * stream context array entries must be a power of two.
+ *
+ * We need a radix tree for mapping physical addresses of TRBs to which stream
+ * ID they belong to.  We need to do this because the host controller won't tell
+ * us which stream ring the TRB came from.  We could store the stream ID in an
+ * event data TRB, but that doesn't help us for the cancellation case, since the
+ * endpoint may stop before it reaches that event data TRB.
+ *
+ * The radix tree maps the upper portion of the TRB DMA address to a ring
+ * segment that has the same upper portion of DMA addresses.  For example, say I
+ * have segments of size 1KB, that are always 64-byte aligned.  A segment may
+ * start at 0x10c91000 and end at 0x10c913f0.  If I use the upper 10 bits, the
+ * key to the stream ID is 0x43244.  I can use the DMA address of the TRB to
+ * pass the radix tree a key to get the right stream ID:
+ *
+ * 	0x10c90fff >> 10 = 0x43243
+ * 	0x10c912c0 >> 10 = 0x43244
+ * 	0x10c91400 >> 10 = 0x43245
+ *
+ * Obviously, only those TRBs with DMA addresses that are within the segment
+ * will make the radix tree return the stream ID for that ring.
+ *
+ * Caveats for the radix tree:
+ *
+ * The radix tree uses an unsigned long as a key pair.  On 32-bit systems, an
+ * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be
+ * 64-bits.  Since we only request 32-bit DMA addresses, we can use that as the
+ * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit
+ * PCI DMA addresses on a 64-bit system).  There might be a problem on 32-bit
+ * extended systems (where the DMA address can be bigger than 32-bits),
+ * if we allow the PCI dma mask to be bigger than 32-bits.  So don't do that.
+ */
+struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	struct xhci_stream_info *stream_info;
+	u32 cur_stream;
+	struct xhci_ring *cur_ring;
+	unsigned long key;
+	u64 addr;
+	int ret;
+
+	xhci_dbg(xhci, "Allocating %u streams and %u "
+			"stream context array entries.\n",
+			num_streams, num_stream_ctxs);
+	if (xhci->cmd_ring_reserved_trbs == MAX_RSVD_CMD_TRBS) {
+		xhci_dbg(xhci, "Command ring has no reserved TRBs available\n");
+		return NULL;
+	}
+	xhci->cmd_ring_reserved_trbs++;
+
+	stream_info = kzalloc(sizeof(struct xhci_stream_info), mem_flags);
+	if (!stream_info)
+		goto cleanup_trbs;
+
+	stream_info->num_streams = num_streams;
+	stream_info->num_stream_ctxs = num_stream_ctxs;
+
+	/* Initialize the array of virtual pointers to stream rings. */
+	stream_info->stream_rings = kzalloc(
+			sizeof(struct xhci_ring *)*num_streams,
+			mem_flags);
+	if (!stream_info->stream_rings)
+		goto cleanup_info;
+
+	/* Initialize the array of DMA addresses for stream rings for the HW. */
+	stream_info->stream_ctx_array = xhci_alloc_stream_ctx(xhci,
+			num_stream_ctxs, &stream_info->ctx_array_dma,
+			mem_flags);
+	if (!stream_info->stream_ctx_array)
+		goto cleanup_ctx;
+	memset(stream_info->stream_ctx_array, 0,
+			sizeof(struct xhci_stream_ctx)*num_stream_ctxs);
+
+	/* Allocate everything needed to free the stream rings later */
+	stream_info->free_streams_command =
+		xhci_alloc_command(xhci, true, true, mem_flags);
+	if (!stream_info->free_streams_command)
+		goto cleanup_ctx;
+
+	INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC);
+
+	/* Allocate rings for all the streams that the driver will use,
+	 * and add their segment DMA addresses to the radix tree.
+	 * Stream 0 is reserved.
+	 */
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		stream_info->stream_rings[cur_stream] =
+			xhci_ring_alloc(xhci, 1, true, mem_flags);
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (!cur_ring)
+			goto cleanup_rings;
+		cur_ring->stream_id = cur_stream;
+		/* Set deq ptr, cycle bit, and stream context type */
+		addr = cur_ring->first_seg->dma |
+			SCT_FOR_CTX(SCT_PRI_TR) |
+			cur_ring->cycle_state;
+		stream_info->stream_ctx_array[cur_stream].stream_ring = addr;
+		xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
+				cur_stream, (unsigned long long) addr);
+
+		key = (unsigned long)
+			(cur_ring->first_seg->dma >> SEGMENT_SHIFT);
+		ret = radix_tree_insert(&stream_info->trb_address_map,
+				key, cur_ring);
+		if (ret) {
+			xhci_ring_free(xhci, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+			goto cleanup_rings;
+		}
+	}
+	/* Leave the other unused stream ring pointers in the stream context
+	 * array initialized to zero.  This will cause the xHC to give us an
+	 * error if the device asks for a stream ID we don't have setup (if it
+	 * was any other way, the host controller would assume the ring is
+	 * "empty" and wait forever for data to be queued to that stream ID).
+	 */
+#if XHCI_DEBUG
+	/* Do a little test on the radix tree to make sure it returns the
+	 * correct values.
+	 */
+	if (xhci_test_radix_tree(xhci, num_streams, stream_info))
+		goto cleanup_rings;
+#endif
+
+	return stream_info;
+
+cleanup_rings:
+	for (cur_stream = 1; cur_stream < num_streams; cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			addr = cur_ring->first_seg->dma;
+			radix_tree_delete(&stream_info->trb_address_map,
+					addr >> SEGMENT_SHIFT);
+			xhci_ring_free(xhci, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+	xhci_free_command(xhci, stream_info->free_streams_command);
+cleanup_ctx:
+	kfree(stream_info->stream_rings);
+cleanup_info:
+	kfree(stream_info);
+cleanup_trbs:
+	xhci->cmd_ring_reserved_trbs--;
+	return NULL;
+}
+/*
+ * Sets the MaxPStreams field and the Linear Stream Array field.
+ * Sets the dequeue pointer to the stream context array.
+ */
+void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		struct xhci_stream_info *stream_info)
+{
+	u32 max_primary_streams;
+	/* MaxPStreams is the number of stream context array entries, not the
+	 * number we're actually using.  Must be in 2^(MaxPstreams + 1) format.
+	 * fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
+	 */
+	max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
+	xhci_dbg(xhci, "Setting number of stream ctx array entries to %u\n",
+			1 << (max_primary_streams + 1));
+	ep_ctx->ep_info &= ~EP_MAXPSTREAMS_MASK;
+	ep_ctx->ep_info |= EP_MAXPSTREAMS(max_primary_streams);
+	ep_ctx->ep_info |= EP_HAS_LSA;
+	ep_ctx->deq  = stream_info->ctx_array_dma;
+}
+
+/*
+ * Sets the MaxPStreams field and the Linear Stream Array field to 0.
+ * Reinstalls the "normal" endpoint ring (at its previous dequeue mark,
+ * not at the beginning of the ring).
+ */
+void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		struct xhci_virt_ep *ep)
+{
+	dma_addr_t addr;
+	ep_ctx->ep_info &= ~EP_MAXPSTREAMS_MASK;
+	ep_ctx->ep_info &= ~EP_HAS_LSA;
+	addr = xhci_trb_virt_to_dma(ep->ring->deq_seg, ep->ring->dequeue);
+	ep_ctx->deq  = addr | ep->ring->cycle_state;
+}
+
+/* Frees all stream contexts associated with the endpoint,
+ *
+ * Caller should fix the endpoint context streams fields.
+ */
+void xhci_free_stream_info(struct xhci_hcd *xhci,
+		struct xhci_stream_info *stream_info)
+{
+	int cur_stream;
+	struct xhci_ring *cur_ring;
+	dma_addr_t addr;
+
+	if (!stream_info)
+		return;
+
+	for (cur_stream = 1; cur_stream < stream_info->num_streams;
+			cur_stream++) {
+		cur_ring = stream_info->stream_rings[cur_stream];
+		if (cur_ring) {
+			addr = cur_ring->first_seg->dma;
+			radix_tree_delete(&stream_info->trb_address_map,
+					addr >> SEGMENT_SHIFT);
+			xhci_ring_free(xhci, cur_ring);
+			stream_info->stream_rings[cur_stream] = NULL;
+		}
+	}
+	xhci_free_command(xhci, stream_info->free_streams_command);
+	xhci->cmd_ring_reserved_trbs--;
+	if (stream_info->stream_ctx_array)
+		xhci_free_stream_ctx(xhci,
+				stream_info->num_stream_ctxs,
+				stream_info->stream_ctx_array,
+				stream_info->ctx_array_dma);
+
+	if (stream_info)
+		kfree(stream_info->stream_rings);
+	kfree(stream_info);
+}
+
+
+/***************** Device context manipulation *************************/
+
 static void xhci_init_endpoint_timer(struct xhci_hcd *xhci,
 		struct xhci_virt_ep *ep)
 {
@@ -328,9 +744,13 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 	if (!dev)
 		return;
 
-	for (i = 0; i < 31; ++i)
+	for (i = 0; i < 31; ++i) {
 		if (dev->eps[i].ring)
 			xhci_ring_free(xhci, dev->eps[i].ring);
+		if (dev->eps[i].stream_info)
+			xhci_free_stream_info(xhci,
+					dev->eps[i].stream_info);
+	}
 
 	if (dev->ring_cache) {
 		for (i = 0; i < dev->num_rings_cached; i++)
@@ -344,7 +764,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 		xhci_free_container_ctx(xhci, dev->out_ctx);
 
 	kfree(xhci->devs[slot_id]);
-	xhci->devs[slot_id] = 0;
+	xhci->devs[slot_id] = NULL;
 }
 
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
@@ -590,9 +1010,9 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
-	if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp)
+	if (udev->speed != USB_SPEED_SUPER)
 		return 0;
-	return ep->ss_ep_comp->desc.bmAttributes;
+	return ep->ss_ep_comp.bmAttributes;
 }
 
 static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
@@ -641,13 +1061,8 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 			usb_endpoint_xfer_bulk(&ep->desc))
 		return 0;
 
-	if (udev->speed == USB_SPEED_SUPER) {
-		if (ep->ss_ep_comp)
-			return ep->ss_ep_comp->desc.wBytesPerInterval;
-		xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
-		/* Assume no bursts, no multiple opportunities to send. */
-		return ep->desc.wMaxPacketSize;
-	}
+	if (udev->speed == USB_SPEED_SUPER)
+		return ep->ss_ep_comp.wBytesPerInterval;
 
 	max_packet = ep->desc.wMaxPacketSize & 0x3ff;
 	max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
@@ -655,6 +1070,9 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	return max_packet * (max_burst + 1);
 }
 
+/* Set up an endpoint with one ring segment.  Do not allocate stream rings.
+ * Drivers will have to call usb_alloc_streams() to do that.
+ */
 int xhci_endpoint_init(struct xhci_hcd *xhci,
 		struct xhci_virt_device *virt_dev,
 		struct usb_device *udev,
@@ -708,12 +1126,9 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		max_packet = ep->desc.wMaxPacketSize;
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		/* dig out max burst from ep companion desc */
-		if (!ep->ss_ep_comp) {
-			xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
-			max_packet = 0;
-		} else {
-			max_packet = ep->ss_ep_comp->desc.bMaxBurst;
-		}
+		max_packet = ep->ss_ep_comp.bMaxBurst;
+		if (!max_packet)
+			xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n");
 		ep_ctx->ep_info2 |= MAX_BURST(max_packet);
 		break;
 	case USB_SPEED_HIGH:
@@ -1003,6 +1418,16 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->device_pool = NULL;
 	xhci_dbg(xhci, "Freed device context pool\n");
 
+	if (xhci->small_streams_pool)
+		dma_pool_destroy(xhci->small_streams_pool);
+	xhci->small_streams_pool = NULL;
+	xhci_dbg(xhci, "Freed small stream array pool\n");
+
+	if (xhci->medium_streams_pool)
+		dma_pool_destroy(xhci->medium_streams_pool);
+	xhci->medium_streams_pool = NULL;
+	xhci_dbg(xhci, "Freed medium stream array pool\n");
+
 	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
 		pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
@@ -1239,6 +1664,22 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (!xhci->segment_pool || !xhci->device_pool)
 		goto fail;
 
+	/* Linear stream context arrays don't have any boundary restrictions,
+	 * and only need to be 16-byte aligned.
+	 */
+	xhci->small_streams_pool =
+		dma_pool_create("xHCI 256 byte stream ctx arrays",
+			dev, SMALL_STREAM_ARRAY_SIZE, 16, 0);
+	xhci->medium_streams_pool =
+		dma_pool_create("xHCI 1KB stream ctx arrays",
+			dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0);
+	/* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE
+	 * will be allocated with pci_alloc_consistent()
+	 */
+
+	if (!xhci->small_streams_pool || !xhci->medium_streams_pool)
+		goto fail;
+
 	/* Set up the command ring to have one segments for now. */
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, true, flags);
 	if (!xhci->cmd_ring)
@@ -1330,7 +1771,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 */
 	init_completion(&xhci->addr_dev);
 	for (i = 0; i < MAX_HC_SLOTS; ++i)
-		xhci->devs[i] = 0;
+		xhci->devs[i] = NULL;
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 417d37aff8d..edffd81fc25 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -54,7 +54,7 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int			retval;
 
-	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 1;
+	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
 
 	xhci->cap_regs = hcd->regs;
 	xhci->op_regs = hcd->regs +
@@ -132,6 +132,8 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.urb_dequeue =		xhci_urb_dequeue,
 	.alloc_dev =		xhci_alloc_dev,
 	.free_dev =		xhci_free_dev,
+	.alloc_streams =	xhci_alloc_streams,
+	.free_streams =		xhci_free_streams,
 	.add_endpoint =		xhci_add_endpoint,
 	.drop_endpoint =	xhci_drop_endpoint,
 	.endpoint_reset =	xhci_endpoint_reset,
@@ -175,12 +177,12 @@ static struct pci_driver xhci_pci_driver = {
 	.shutdown = 	usb_hcd_pci_shutdown,
 };
 
-int xhci_register_pci()
+int xhci_register_pci(void)
 {
 	return pci_register_driver(&xhci_pci_driver);
 }
 
-void xhci_unregister_pci()
+void xhci_unregister_pci(void)
 {
 	pci_unregister_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 85d7e8f2085..36c858e5b52 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -112,6 +112,12 @@ static inline int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		return (trb->link.control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK);
 }
 
+static inline int enqueue_is_link_trb(struct xhci_ring *ring)
+{
+	struct xhci_link_trb *link = &ring->enqueue->link;
+	return ((link->control & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK));
+}
+
 /* Updates trb to point to the next TRB in the ring, and updates seg if the next
  * TRB is in a new segment.  This does not skip over link TRBs, and it does not
  * effect the ring dequeue or enqueue pointers.
@@ -193,20 +199,15 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 	while (last_trb(xhci, ring, ring->enq_seg, next)) {
 		if (!consumer) {
 			if (ring != xhci->event_ring) {
-				/* If we're not dealing with 0.95 hardware,
-				 * carry over the chain bit of the previous TRB
-				 * (which may mean the chain bit is cleared).
-				 */
-				if (!xhci_link_trb_quirk(xhci)) {
-					next->link.control &= ~TRB_CHAIN;
-					next->link.control |= chain;
+				if (chain) {
+					next->link.control |= TRB_CHAIN;
+
+					/* Give this link TRB to the hardware */
+					wmb();
+					next->link.control ^= TRB_CYCLE;
+				} else {
+					break;
 				}
-				/* Give this link TRB to the hardware */
-				wmb();
-				if (next->link.control & TRB_CYCLE)
-					next->link.control &= (u32) ~TRB_CYCLE;
-				else
-					next->link.control |= (u32) TRB_CYCLE;
 			}
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
@@ -242,10 +243,34 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 	int i;
 	union xhci_trb *enq = ring->enqueue;
 	struct xhci_segment *enq_seg = ring->enq_seg;
+	struct xhci_segment *cur_seg;
+	unsigned int left_on_ring;
+
+	/* If we are currently pointing to a link TRB, advance the
+	 * enqueue pointer before checking for space */
+	while (last_trb(xhci, ring, enq_seg, enq)) {
+		enq_seg = enq_seg->next;
+		enq = enq_seg->trbs;
+	}
 
 	/* Check if ring is empty */
-	if (enq == ring->dequeue)
+	if (enq == ring->dequeue) {
+		/* Can't use link trbs */
+		left_on_ring = TRBS_PER_SEGMENT - 1;
+		for (cur_seg = enq_seg->next; cur_seg != enq_seg;
+				cur_seg = cur_seg->next)
+			left_on_ring += TRBS_PER_SEGMENT - 1;
+
+		/* Always need one TRB free in the ring. */
+		left_on_ring -= 1;
+		if (num_trbs > left_on_ring) {
+			xhci_warn(xhci, "Not enough room on ring; "
+					"need %u TRBs, %u TRBs left\n",
+					num_trbs, left_on_ring);
+			return 0;
+		}
 		return 1;
+	}
 	/* Make sure there's an extra empty TRB available */
 	for (i = 0; i <= num_trbs; ++i) {
 		if (enq == ring->dequeue)
@@ -295,7 +320,8 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 
 static void ring_ep_doorbell(struct xhci_hcd *xhci,
 		unsigned int slot_id,
-		unsigned int ep_index)
+		unsigned int ep_index,
+		unsigned int stream_id)
 {
 	struct xhci_virt_ep *ep;
 	unsigned int ep_state;
@@ -306,11 +332,16 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
 	ep_state = ep->ep_state;
 	/* Don't ring the doorbell for this endpoint if there are pending
 	 * cancellations because the we don't want to interrupt processing.
+	 * We don't want to restart any stream rings if there's a set dequeue
+	 * pointer command pending because the device can choose to start any
+	 * stream once the endpoint is on the HW schedule.
+	 * FIXME - check all the stream rings for pending cancellations.
 	 */
 	if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING)
 			&& !(ep_state & EP_HALTED)) {
 		field = xhci_readl(xhci, db_addr) & DB_MASK;
-		xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
+		field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id);
+		xhci_writel(xhci, field, db_addr);
 		/* Flush PCI posted writes - FIXME Matthew Wilcox says this
 		 * isn't time-critical and we shouldn't make the CPU wait for
 		 * the flush.
@@ -319,6 +350,31 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
 	}
 }
 
+/* Ring the doorbell for any rings with pending URBs */
+static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
+		unsigned int slot_id,
+		unsigned int ep_index)
+{
+	unsigned int stream_id;
+	struct xhci_virt_ep *ep;
+
+	ep = &xhci->devs[slot_id]->eps[ep_index];
+
+	/* A ring has pending URBs if its TD list is not empty */
+	if (!(ep->ep_state & EP_HAS_STREAMS)) {
+		if (!(list_empty(&ep->ring->td_list)))
+			ring_ep_doorbell(xhci, slot_id, ep_index, 0);
+		return;
+	}
+
+	for (stream_id = 1; stream_id < ep->stream_info->num_streams;
+			stream_id++) {
+		struct xhci_stream_info *stream_info = ep->stream_info;
+		if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
+			ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
+	}
+}
+
 /*
  * Find the segment that trb is in.  Start searching in start_seg.
  * If we must move past a segment that has a link TRB with a toggle cycle state
@@ -334,13 +390,14 @@ static struct xhci_segment *find_trb_seg(
 	while (cur_seg->trbs > trb ||
 			&cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
 		generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
-		if (TRB_TYPE(generic_trb->field[3]) == TRB_LINK &&
+		if ((generic_trb->field[3] & TRB_TYPE_BITMASK) ==
+				TRB_TYPE(TRB_LINK) &&
 				(generic_trb->field[3] & LINK_TOGGLE))
 			*cycle_state = ~(*cycle_state) & 0x1;
 		cur_seg = cur_seg->next;
 		if (cur_seg == start_seg)
 			/* Looped over the entire list.  Oops! */
-			return 0;
+			return NULL;
 	}
 	return cur_seg;
 }
@@ -361,14 +418,23 @@ static struct xhci_segment *find_trb_seg(
  */
 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
-		struct xhci_td *cur_td, struct xhci_dequeue_state *state)
+		unsigned int stream_id, struct xhci_td *cur_td,
+		struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
-	struct xhci_ring *ep_ring = dev->eps[ep_index].ring;
+	struct xhci_ring *ep_ring;
 	struct xhci_generic_trb *trb;
 	struct xhci_ep_ctx *ep_ctx;
 	dma_addr_t addr;
 
+	ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
+			ep_index, stream_id);
+	if (!ep_ring) {
+		xhci_warn(xhci, "WARN can't find new dequeue state "
+				"for invalid stream ID %u.\n",
+				stream_id);
+		return;
+	}
 	state->new_cycle_state = 0;
 	xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
 	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
@@ -390,7 +456,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		BUG();
 
 	trb = &state->new_deq_ptr->generic;
-	if (TRB_TYPE(trb->field[3]) == TRB_LINK &&
+	if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) &&
 				(trb->field[3] & LINK_TOGGLE))
 		state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
@@ -448,11 +514,13 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 }
 
 static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
-		unsigned int ep_index, struct xhci_segment *deq_seg,
+		unsigned int ep_index, unsigned int stream_id,
+		struct xhci_segment *deq_seg,
 		union xhci_trb *deq_ptr, u32 cycle_state);
 
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id,
 		struct xhci_dequeue_state *deq_state)
 {
 	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
@@ -464,7 +532,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 			deq_state->new_deq_ptr,
 			(unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
 			deq_state->new_cycle_state);
-	queue_set_tr_deq(xhci, slot_id, ep_index,
+	queue_set_tr_deq(xhci, slot_id, ep_index, stream_id,
 			deq_state->new_deq_seg,
 			deq_state->new_deq_ptr,
 			(u32) deq_state->new_cycle_state);
@@ -523,7 +591,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	struct xhci_ring *ep_ring;
 	struct xhci_virt_ep *ep;
 	struct list_head *entry;
-	struct xhci_td *cur_td = 0;
+	struct xhci_td *cur_td = NULL;
 	struct xhci_td *last_unlinked_td;
 
 	struct xhci_dequeue_state deq_state;
@@ -532,11 +600,10 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
 	ep = &xhci->devs[slot_id]->eps[ep_index];
-	ep_ring = ep->ring;
 
 	if (list_empty(&ep->cancelled_td_list)) {
 		xhci_stop_watchdog_timer_in_irq(xhci, ep);
-		ring_ep_doorbell(xhci, slot_id, ep_index);
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 		return;
 	}
 
@@ -550,15 +617,36 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 		xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
 				cur_td->first_trb,
 				(unsigned long long)xhci_trb_virt_to_dma(cur_td->start_seg, cur_td->first_trb));
+		ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
+		if (!ep_ring) {
+			/* This shouldn't happen unless a driver is mucking
+			 * with the stream ID after submission.  This will
+			 * leave the TD on the hardware ring, and the hardware
+			 * will try to execute it, and may access a buffer
+			 * that has already been freed.  In the best case, the
+			 * hardware will execute it, and the event handler will
+			 * ignore the completion event for that TD, since it was
+			 * removed from the td_list for that endpoint.  In
+			 * short, don't muck with the stream ID after
+			 * submission.
+			 */
+			xhci_warn(xhci, "WARN Cancelled URB %p "
+					"has invalid stream ID %u.\n",
+					cur_td->urb,
+					cur_td->urb->stream_id);
+			goto remove_finished_td;
+		}
 		/*
 		 * If we stopped on the TD we need to cancel, then we have to
 		 * move the xHC endpoint ring dequeue pointer past this TD.
 		 */
 		if (cur_td == ep->stopped_td)
-			xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
-					&deq_state);
+			xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
+					cur_td->urb->stream_id,
+					cur_td, &deq_state);
 		else
 			td_to_noop(xhci, ep_ring, cur_td);
+remove_finished_td:
 		/*
 		 * The event handler won't see a completion for this TD anymore,
 		 * so remove it from the endpoint ring's TD list.  Keep it in
@@ -572,12 +660,16 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
 	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
 		xhci_queue_new_dequeue_state(xhci,
-				slot_id, ep_index, &deq_state);
+				slot_id, ep_index,
+				ep->stopped_td->urb->stream_id,
+				&deq_state);
 		xhci_ring_cmd_db(xhci);
 	} else {
-		/* Otherwise just ring the doorbell to restart the ring */
-		ring_ep_doorbell(xhci, slot_id, ep_index);
+		/* Otherwise ring the doorbell(s) to restart queued transfers */
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 	}
+	ep->stopped_td = NULL;
+	ep->stopped_trb = NULL;
 
 	/*
 	 * Drop the lock and complete the URBs in the cancelled TD list.
@@ -734,6 +826,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 {
 	unsigned int slot_id;
 	unsigned int ep_index;
+	unsigned int stream_id;
 	struct xhci_ring *ep_ring;
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx *ep_ctx;
@@ -741,8 +834,19 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	stream_id = TRB_TO_STREAM_ID(trb->generic.field[2]);
 	dev = xhci->devs[slot_id];
-	ep_ring = dev->eps[ep_index].ring;
+
+	ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
+	if (!ep_ring) {
+		xhci_warn(xhci, "WARN Set TR deq ptr command for "
+				"freed stream ID %u\n",
+				stream_id);
+		/* XXX: Harmless??? */
+		dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
+		return;
+	}
+
 	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 
@@ -787,7 +891,8 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 	}
 
 	dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
-	ring_ep_doorbell(xhci, slot_id, ep_index);
+	/* Restart any rings with pending URBs */
+	ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 }
 
 static void handle_reset_ep_completion(struct xhci_hcd *xhci,
@@ -796,11 +901,9 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 {
 	int slot_id;
 	unsigned int ep_index;
-	struct xhci_ring *ep_ring;
 
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
-	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
 	/* This command will only fail if the endpoint wasn't halted,
 	 * but we don't care.
 	 */
@@ -818,9 +921,9 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
 				false);
 		xhci_ring_cmd_db(xhci);
 	} else {
-		/* Clear our internal halted state and restart the ring */
+		/* Clear our internal halted state and restart the ring(s) */
 		xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
-		ring_ep_doorbell(xhci, slot_id, ep_index);
+		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 	}
 }
 
@@ -897,16 +1000,19 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 		 * Configure endpoint commands can come from the USB core
 		 * configuration or alt setting changes, or because the HW
 		 * needed an extra configure endpoint command after a reset
-		 * endpoint command.  In the latter case, the xHCI driver is
-		 * not waiting on the configure endpoint command.
+		 * endpoint command or streams were being configured.
+		 * If the command was for a halted endpoint, the xHCI driver
+		 * is not waiting on the configure endpoint command.
 		 */
 		ctrl_ctx = xhci_get_input_control_ctx(xhci,
 				virt_dev->in_ctx);
 		/* Input ctx add_flags are the endpoint index plus one */
 		ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
 		/* A usb_set_interface() call directly after clearing a halted
-		 * condition may race on this quirky hardware.
-		 * Not worth worrying about, since this is prototype hardware.
+		 * condition may race on this quirky hardware.  Not worth
+		 * worrying about, since this is prototype hardware.  Not sure
+		 * if this will work for streams, but streams support was
+		 * untested on this prototype.
 		 */
 		if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
 				ep_index != (unsigned int) -1 &&
@@ -919,10 +1025,10 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 			xhci_dbg(xhci, "Completed config ep cmd - "
 					"last ep index = %d, state = %d\n",
 					ep_index, ep_state);
-			/* Clear our internal halted state and restart ring */
+			/* Clear internal halted state and restart ring(s) */
 			xhci->devs[slot_id]->eps[ep_index].ep_state &=
 				~EP_HALTED;
-			ring_ep_doorbell(xhci, slot_id, ep_index);
+			ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 			break;
 		}
 bandwidth_change:
@@ -1018,7 +1124,7 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 
 	do {
 		if (start_dma == 0)
-			return 0;
+			return NULL;
 		/* We may get an event for a Link TRB in the middle of a TD */
 		end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
 				&cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
@@ -1040,7 +1146,7 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 						 suspect_dma <= end_trb_dma))
 					return cur_seg;
 			}
-			return 0;
+			return NULL;
 		} else {
 			/* Might still be somewhere in this segment */
 			if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
@@ -1050,19 +1156,27 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 		start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
 	} while (cur_seg != start_seg);
 
-	return 0;
+	return NULL;
 }
 
 static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id,
 		struct xhci_td *td, union xhci_trb *event_trb)
 {
 	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
 	ep->ep_state |= EP_HALTED;
 	ep->stopped_td = td;
 	ep->stopped_trb = event_trb;
+	ep->stopped_stream = stream_id;
+
 	xhci_queue_reset_ep(xhci, slot_id, ep_index);
 	xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
+
+	ep->stopped_td = NULL;
+	ep->stopped_trb = NULL;
+	ep->stopped_stream = 0;
+
 	xhci_ring_cmd_db(xhci);
 }
 
@@ -1119,11 +1233,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	struct xhci_ring *ep_ring;
 	unsigned int slot_id;
 	int ep_index;
-	struct xhci_td *td = 0;
+	struct xhci_td *td = NULL;
 	dma_addr_t event_dma;
 	struct xhci_segment *event_seg;
 	union xhci_trb *event_trb;
-	struct urb *urb = 0;
+	struct urb *urb = NULL;
 	int status = -EINPROGRESS;
 	struct xhci_ep_ctx *ep_ctx;
 	u32 trb_comp_code;
@@ -1140,10 +1254,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	ep_index = TRB_TO_EP_ID(event->flags) - 1;
 	xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
 	ep = &xdev->eps[ep_index];
-	ep_ring = ep->ring;
+	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
 	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
 	if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
-		xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
+		xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
+				"or incorrect stream ring\n");
 		return -ENODEV;
 	}
 
@@ -1274,7 +1389,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				td->urb->actual_length = 0;
 
 			xhci_cleanup_halted_endpoint(xhci,
-					slot_id, ep_index, td, event_trb);
+					slot_id, ep_index, 0, td, event_trb);
 			goto td_cleanup;
 		}
 		/*
@@ -1390,8 +1505,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
 					cur_trb != event_trb;
 					next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
-				if (TRB_TYPE(cur_trb->generic.field[3]) != TRB_TR_NOOP &&
-						TRB_TYPE(cur_trb->generic.field[3]) != TRB_LINK)
+				if ((cur_trb->generic.field[3] &
+				 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) &&
+				    (cur_trb->generic.field[3] &
+				 TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK))
 					td->urb->actual_length +=
 						TRB_LEN(cur_trb->generic.field[2]);
 			}
@@ -1423,6 +1540,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			 */
 			ep->stopped_td = td;
 			ep->stopped_trb = event_trb;
+			ep->stopped_stream = ep_ring->stream_id;
 		} else if (xhci_requires_manual_halt_cleanup(xhci,
 					ep_ctx, trb_comp_code)) {
 			/* Other types of errors halt the endpoint, but the
@@ -1431,7 +1549,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			 * xHCI hardware manually.
 			 */
 			xhci_cleanup_halted_endpoint(xhci,
-					slot_id, ep_index, td, event_trb);
+					slot_id, ep_index, ep_ring->stream_id, td, event_trb);
 		} else {
 			/* Update ring dequeue pointer */
 			while (ep_ring->dequeue != td->last_trb)
@@ -1621,20 +1739,66 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		xhci_err(xhci, "ERROR no room on ep ring\n");
 		return -ENOMEM;
 	}
+
+	if (enqueue_is_link_trb(ep_ring)) {
+		struct xhci_ring *ring = ep_ring;
+		union xhci_trb *next;
+
+		xhci_dbg(xhci, "prepare_ring: pointing to link trb\n");
+		next = ring->enqueue;
+
+		while (last_trb(xhci, ring, ring->enq_seg, next)) {
+
+			/* If we're not dealing with 0.95 hardware,
+			 * clear the chain bit.
+			 */
+			if (!xhci_link_trb_quirk(xhci))
+				next->link.control &= ~TRB_CHAIN;
+			else
+				next->link.control |= TRB_CHAIN;
+
+			wmb();
+			next->link.control ^= (u32) TRB_CYCLE;
+
+			/* Toggle the cycle bit after the last ring segment. */
+			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
+				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				if (!in_interrupt()) {
+					xhci_dbg(xhci, "queue_trb: Toggle cycle "
+						"state for ring %p = %i\n",
+						ring, (unsigned int)ring->cycle_state);
+				}
+			}
+			ring->enq_seg = ring->enq_seg->next;
+			ring->enqueue = ring->enq_seg->trbs;
+			next = ring->enqueue;
+		}
+	}
+
 	return 0;
 }
 
 static int prepare_transfer(struct xhci_hcd *xhci,
 		struct xhci_virt_device *xdev,
 		unsigned int ep_index,
+		unsigned int stream_id,
 		unsigned int num_trbs,
 		struct urb *urb,
 		struct xhci_td **td,
 		gfp_t mem_flags)
 {
 	int ret;
+	struct xhci_ring *ep_ring;
 	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
-	ret = prepare_ring(xhci, xdev->eps[ep_index].ring,
+
+	ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id);
+	if (!ep_ring) {
+		xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
+				stream_id);
+		return -EINVAL;
+	}
+
+	ret = prepare_ring(xhci, ep_ring,
 			ep_ctx->ep_info & EP_STATE_MASK,
 			num_trbs, mem_flags);
 	if (ret)
@@ -1654,9 +1818,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 	(*td)->urb = urb;
 	urb->hcpriv = (void *) (*td);
 	/* Add this TD to the tail of the endpoint ring's TD list */
-	list_add_tail(&(*td)->td_list, &xdev->eps[ep_index].ring->td_list);
-	(*td)->start_seg = xdev->eps[ep_index].ring->enq_seg;
-	(*td)->first_trb = xdev->eps[ep_index].ring->enqueue;
+	list_add_tail(&(*td)->td_list, &ep_ring->td_list);
+	(*td)->start_seg = ep_ring->enq_seg;
+	(*td)->first_trb = ep_ring->enqueue;
 
 	return 0;
 }
@@ -1672,7 +1836,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
 
 	xhci_dbg(xhci, "count sg list trbs: \n");
 	num_trbs = 0;
-	for_each_sg(urb->sg->sg, sg, num_sgs, i) {
+	for_each_sg(urb->sg, sg, num_sgs, i) {
 		unsigned int previous_total_trbs = num_trbs;
 		unsigned int len = sg_dma_len(sg);
 
@@ -1722,7 +1886,7 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
 }
 
 static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
-		unsigned int ep_index, int start_cycle,
+		unsigned int ep_index, unsigned int stream_id, int start_cycle,
 		struct xhci_generic_trb *start_trb, struct xhci_td *td)
 {
 	/*
@@ -1731,7 +1895,7 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
 	 */
 	wmb();
 	start_trb->field[3] |= start_cycle;
-	ring_ep_doorbell(xhci, slot_id, ep_index);
+	ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
 }
 
 /*
@@ -1805,12 +1969,16 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
 
-	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep_ring)
+		return -EINVAL;
+
 	num_trbs = count_sg_trbs_needed(xhci, urb);
 	num_sgs = urb->num_sgs;
 
 	trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
-			ep_index, num_trbs, urb, &td, mem_flags);
+			ep_index, urb->stream_id,
+			num_trbs, urb, &td, mem_flags);
 	if (trb_buff_len < 0)
 		return trb_buff_len;
 	/*
@@ -1831,7 +1999,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 *    the amount of memory allocated for this scatter-gather list.
 	 * 3. TRBs buffers can't cross 64KB boundaries.
 	 */
-	sg = urb->sg->sg;
+	sg = urb->sg;
 	addr = (u64) sg_dma_address(sg);
 	this_sg_len = sg_dma_len(sg);
 	trb_buff_len = TRB_MAX_BUFF_SIZE -
@@ -1919,7 +2087,8 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	} while (running_total < urb->transfer_buffer_length);
 
 	check_trb_math(urb, num_trbs, running_total);
-	giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+			start_cycle, start_trb, td);
 	return 0;
 }
 
@@ -1938,10 +2107,12 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	int running_total, trb_buff_len, ret;
 	u64 addr;
 
-	if (urb->sg)
+	if (urb->num_sgs)
 		return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
 
-	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep_ring)
+		return -EINVAL;
 
 	num_trbs = 0;
 	/* How much data is (potentially) left before the 64KB boundary? */
@@ -1968,7 +2139,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				(unsigned long long)urb->transfer_dma,
 				num_trbs);
 
-	ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+			ep_index, urb->stream_id,
 			num_trbs, urb, &td, mem_flags);
 	if (ret < 0)
 		return ret;
@@ -2038,7 +2210,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	} while (running_total < urb->transfer_buffer_length);
 
 	check_trb_math(urb, num_trbs, running_total);
-	giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+	giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
+			start_cycle, start_trb, td);
 	return 0;
 }
 
@@ -2055,7 +2228,9 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	u32 field, length_field;
 	struct xhci_td *td;
 
-	ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep_ring)
+		return -EINVAL;
 
 	/*
 	 * Need to copy setup packet into setup TRB, so we can't use the setup
@@ -2076,8 +2251,9 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	 */
 	if (urb->transfer_buffer_length > 0)
 		num_trbs++;
-	ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, num_trbs,
-			urb, &td, mem_flags);
+	ret = prepare_transfer(xhci, xhci->devs[slot_id],
+			ep_index, urb->stream_id,
+			num_trbs, urb, &td, mem_flags);
 	if (ret < 0)
 		return ret;
 
@@ -2132,7 +2308,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			/* Event on completion */
 			field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
 
-	giveback_first_trb(xhci, slot_id, ep_index, start_cycle, start_trb, td);
+	giveback_first_trb(xhci, slot_id, ep_index, 0,
+			start_cycle, start_trb, td);
 	return 0;
 }
 
@@ -2244,12 +2421,14 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
  * This should not be used for endpoints that have streams enabled.
  */
 static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
-		unsigned int ep_index, struct xhci_segment *deq_seg,
+		unsigned int ep_index, unsigned int stream_id,
+		struct xhci_segment *deq_seg,
 		union xhci_trb *deq_ptr, u32 cycle_state)
 {
 	dma_addr_t addr;
 	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
 	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
 
 	addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
@@ -2260,7 +2439,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 		return 0;
 	}
 	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
-			upper_32_bits(addr), 0,
+			upper_32_bits(addr), trb_stream_id,
 			trb_slot_id | trb_ep_index | type, false);
 }
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7e427727390..40e0a0c221b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/irq.h>
+#include <linux/log2.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/slab.h>
@@ -352,11 +353,7 @@ void xhci_event_ring_work(unsigned long arg)
 		if (!xhci->devs[i])
 			continue;
 		for (j = 0; j < 31; ++j) {
-			struct xhci_ring *ring = xhci->devs[i]->eps[j].ring;
-			if (!ring)
-				continue;
-			xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j);
-			xhci_debug_segment(xhci, ring->deq_seg);
+			xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]);
 		}
 	}
 
@@ -726,8 +723,21 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		spin_lock_irqsave(&xhci->lock, flags);
 		if (xhci->xhc_state & XHCI_STATE_DYING)
 			goto dying;
-		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
-				slot_id, ep_index);
+		if (xhci->devs[slot_id]->eps[ep_index].ep_state &
+				EP_GETTING_STREAMS) {
+			xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep "
+					"is transitioning to using streams.\n");
+			ret = -EINVAL;
+		} else if (xhci->devs[slot_id]->eps[ep_index].ep_state &
+				EP_GETTING_NO_STREAMS) {
+			xhci_warn(xhci, "WARN: Can't enqueue URB while bulk ep "
+					"is transitioning to "
+					"not having streams.\n");
+			ret = -EINVAL;
+		} else {
+			ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
+					slot_id, ep_index);
+		}
 		spin_unlock_irqrestore(&xhci->lock, flags);
 	} else if (usb_endpoint_xfer_int(&urb->ep->desc)) {
 		spin_lock_irqsave(&xhci->lock, flags);
@@ -825,7 +835,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	xhci_debug_ring(xhci, xhci->event_ring);
 	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
 	ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
-	ep_ring = ep->ring;
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep_ring) {
+		ret = -EINVAL;
+		goto done;
+	}
+
 	xhci_dbg(xhci, "Endpoint ring:\n");
 	xhci_debug_ring(xhci, ep_ring);
 	td = (struct xhci_td *) urb->hcpriv;
@@ -1369,7 +1384,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	 * or it will attempt to resend it on the next doorbell ring.
 	 */
 	xhci_find_new_dequeue_state(xhci, udev->slot_id,
-			ep_index, ep->stopped_td,
+			ep_index, ep->stopped_stream, ep->stopped_td,
 			&deq_state);
 
 	/* HW with the reset endpoint quirk will use the saved dequeue state to
@@ -1378,10 +1393,12 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
 		xhci_dbg(xhci, "Queueing new dequeue state\n");
 		xhci_queue_new_dequeue_state(xhci, udev->slot_id,
-				ep_index, &deq_state);
+				ep_index, ep->stopped_stream, &deq_state);
 	} else {
 		/* Better hope no one uses the input context between now and the
 		 * reset endpoint completion!
+		 * XXX: No idea how this hardware will react when stream rings
+		 * are enabled.
 		 */
 		xhci_dbg(xhci, "Setting up input context for "
 				"configure endpoint command\n");
@@ -1438,12 +1455,391 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 		kfree(virt_ep->stopped_td);
 		xhci_ring_cmd_db(xhci);
 	}
+	virt_ep->stopped_td = NULL;
+	virt_ep->stopped_trb = NULL;
+	virt_ep->stopped_stream = 0;
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	if (ret)
 		xhci_warn(xhci, "FIXME allocate a new ring segment\n");
 }
 
+static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct usb_host_endpoint *ep,
+		unsigned int slot_id)
+{
+	int ret;
+	unsigned int ep_index;
+	unsigned int ep_state;
+
+	if (!ep)
+		return -EINVAL;
+	ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, __func__);
+	if (ret <= 0)
+		return -EINVAL;
+	if (ep->ss_ep_comp.bmAttributes == 0) {
+		xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
+				" descriptor for ep 0x%x does not support streams\n",
+				ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+	if (ep_state & EP_HAS_STREAMS ||
+			ep_state & EP_GETTING_STREAMS) {
+		xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
+				"already has streams set up.\n",
+				ep->desc.bEndpointAddress);
+		xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
+				"dynamic stream context array reallocation.\n");
+		return -EINVAL;
+	}
+	if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) {
+		xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
+				"endpoint 0x%x; URBs are pending.\n",
+				ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void xhci_calculate_streams_entries(struct xhci_hcd *xhci,
+		unsigned int *num_streams, unsigned int *num_stream_ctxs)
+{
+	unsigned int max_streams;
+
+	/* The stream context array size must be a power of two */
+	*num_stream_ctxs = roundup_pow_of_two(*num_streams);
+	/*
+	 * Find out how many primary stream array entries the host controller
+	 * supports.  Later we may use secondary stream arrays (similar to 2nd
+	 * level page entries), but that's an optional feature for xHCI host
+	 * controllers. xHCs must support at least 4 stream IDs.
+	 */
+	max_streams = HCC_MAX_PSA(xhci->hcc_params);
+	if (*num_stream_ctxs > max_streams) {
+		xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
+				max_streams);
+		*num_stream_ctxs = max_streams;
+		*num_streams = max_streams;
+	}
+}
+
+/* Returns an error code if one of the endpoint already has streams.
+ * This does not change any data structures, it only checks and gathers
+ * information.
+ */
+static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int *num_streams, u32 *changed_ep_bitmask)
+{
+	unsigned int max_streams;
+	unsigned int endpoint_flag;
+	int i;
+	int ret;
+
+	for (i = 0; i < num_eps; i++) {
+		ret = xhci_check_streams_endpoint(xhci, udev,
+				eps[i], udev->slot_id);
+		if (ret < 0)
+			return ret;
+
+		max_streams = USB_SS_MAX_STREAMS(
+				eps[i]->ss_ep_comp.bmAttributes);
+		if (max_streams < (*num_streams - 1)) {
+			xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
+					eps[i]->desc.bEndpointAddress,
+					max_streams);
+			*num_streams = max_streams+1;
+		}
+
+		endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc);
+		if (*changed_ep_bitmask & endpoint_flag)
+			return -EINVAL;
+		*changed_ep_bitmask |= endpoint_flag;
+	}
+	return 0;
+}
+
+static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps)
+{
+	u32 changed_ep_bitmask = 0;
+	unsigned int slot_id;
+	unsigned int ep_index;
+	unsigned int ep_state;
+	int i;
+
+	slot_id = udev->slot_id;
+	if (!xhci->devs[slot_id])
+		return 0;
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+		/* Are streams already being freed for the endpoint? */
+		if (ep_state & EP_GETTING_NO_STREAMS) {
+			xhci_warn(xhci, "WARN Can't disable streams for "
+					"endpoint 0x%x\n, "
+					"streams are being disabled already.",
+					eps[i]->desc.bEndpointAddress);
+			return 0;
+		}
+		/* Are there actually any streams to free? */
+		if (!(ep_state & EP_HAS_STREAMS) &&
+				!(ep_state & EP_GETTING_STREAMS)) {
+			xhci_warn(xhci, "WARN Can't disable streams for "
+					"endpoint 0x%x\n, "
+					"streams are already disabled!",
+					eps[i]->desc.bEndpointAddress);
+			xhci_warn(xhci, "WARN xhci_free_streams() called "
+					"with non-streams endpoint\n");
+			return 0;
+		}
+		changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc);
+	}
+	return changed_ep_bitmask;
+}
+
+/*
+ * The USB device drivers use this function (though the HCD interface in USB
+ * core) to prepare a set of bulk endpoints to use streams.  Streams are used to
+ * coordinate mass storage command queueing across multiple endpoints (basically
+ * a stream ID == a task ID).
+ *
+ * Setting up streams involves allocating the same size stream context array
+ * for each endpoint and issuing a configure endpoint command for all endpoints.
+ *
+ * Don't allow the call to succeed if one endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ *
+ * Drivers may get less stream IDs than they asked for, if the host controller
+ * hardware or endpoints claim they can't support the number of requested
+ * stream IDs.
+ */
+int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	int i, ret;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device *vdev;
+	struct xhci_command *config_cmd;
+	unsigned int ep_index;
+	unsigned int num_stream_ctxs;
+	unsigned long flags;
+	u32 changed_ep_bitmask = 0;
+
+	if (!eps)
+		return -EINVAL;
+
+	/* Add one to the number of streams requested to account for
+	 * stream 0 that is reserved for xHCI usage.
+	 */
+	num_streams += 1;
+	xhci = hcd_to_xhci(hcd);
+	xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
+			num_streams);
+
+	config_cmd = xhci_alloc_command(xhci, true, true, mem_flags);
+	if (!config_cmd) {
+		xhci_dbg(xhci, "Could not allocate xHCI command structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Check to make sure all endpoints are not already configured for
+	 * streams.  While we're at it, find the maximum number of streams that
+	 * all the endpoints will support and check for duplicate endpoints.
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps,
+			num_eps, &num_streams, &changed_ep_bitmask);
+	if (ret < 0) {
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return ret;
+	}
+	if (num_streams <= 1) {
+		xhci_warn(xhci, "WARN: endpoints can't handle "
+				"more than one stream.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -EINVAL;
+	}
+	vdev = xhci->devs[udev->slot_id];
+	/* Mark each endpoint as being in transistion, so
+	 * xhci_urb_enqueue() will reject all URBs.
+	 */
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Setup internal data structures and allocate HW data structures for
+	 * streams (but don't install the HW structures in the input context
+	 * until we're sure all memory allocation succeeded).
+	 */
+	xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs);
+	xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
+			num_stream_ctxs, num_streams);
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
+				num_stream_ctxs,
+				num_streams, mem_flags);
+		if (!vdev->eps[ep_index].stream_info)
+			goto cleanup;
+		/* Set maxPstreams in endpoint context and update deq ptr to
+		 * point to stream context array. FIXME
+		 */
+	}
+
+	/* Set up the input context for a configure endpoint command. */
+	for (i = 0; i < num_eps; i++) {
+		struct xhci_ep_ctx *ep_ctx;
+
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index);
+
+		xhci_endpoint_copy(xhci, config_cmd->in_ctx,
+				vdev->out_ctx, ep_index);
+		xhci_setup_streams_ep_input_ctx(xhci, ep_ctx,
+				vdev->eps[ep_index].stream_info);
+	}
+	/* Tell the HW to drop its old copy of the endpoint context info
+	 * and add the updated copy from the input context.
+	 */
+	xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
+			vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
+
+	/* Issue and wait for the configure endpoint command */
+	ret = xhci_configure_endpoint(xhci, udev, config_cmd,
+			false, false);
+
+	/* xHC rejected the configure endpoint command for some reason, so we
+	 * leave the old ring intact and free our internal streams data
+	 * structure.
+	 */
+	if (ret < 0)
+		goto cleanup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+		xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
+			 udev->slot_id, ep_index);
+		vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
+	}
+	xhci_free_command(xhci, config_cmd);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Subtract 1 for stream 0, which drivers can't use */
+	return num_streams - 1;
+
+cleanup:
+	/* If it didn't work, free the streams! */
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+		vdev->eps[ep_index].stream_info = NULL;
+		/* FIXME Unset maxPstreams in endpoint context and
+		 * update deq ptr to point to normal string ring.
+		 */
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+		vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+		xhci_endpoint_zero(xhci, vdev, eps[i]);
+	}
+	xhci_free_command(xhci, config_cmd);
+	return -ENOMEM;
+}
+
+/* Transition the endpoint from using streams to being a "normal" endpoint
+ * without streams.
+ *
+ * Modify the endpoint context state, submit a configure endpoint command,
+ * and free all endpoint rings for streams if that completes successfully.
+ */
+int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags)
+{
+	int i, ret;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device *vdev;
+	struct xhci_command *command;
+	unsigned int ep_index;
+	unsigned long flags;
+	u32 changed_ep_bitmask;
+
+	xhci = hcd_to_xhci(hcd);
+	vdev = xhci->devs[udev->slot_id];
+
+	/* Set up a configure endpoint command to remove the streams rings */
+	spin_lock_irqsave(&xhci->lock, flags);
+	changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci,
+			udev, eps, num_eps);
+	if (changed_ep_bitmask == 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Use the xhci_command structure from the first endpoint.  We may have
+	 * allocated too many, but the driver may call xhci_free_streams() for
+	 * each endpoint it grouped into one call to xhci_alloc_streams().
+	 */
+	ep_index = xhci_get_endpoint_index(&eps[0]->desc);
+	command = vdev->eps[ep_index].stream_info->free_streams_command;
+	for (i = 0; i < num_eps; i++) {
+		struct xhci_ep_ctx *ep_ctx;
+
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+		xhci->devs[udev->slot_id]->eps[ep_index].ep_state |=
+			EP_GETTING_NO_STREAMS;
+
+		xhci_endpoint_copy(xhci, command->in_ctx,
+				vdev->out_ctx, ep_index);
+		xhci_setup_no_streams_ep_input_ctx(xhci, ep_ctx,
+				&vdev->eps[ep_index]);
+	}
+	xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+			vdev->out_ctx, changed_ep_bitmask, changed_ep_bitmask);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Issue and wait for the configure endpoint command,
+	 * which must succeed.
+	 */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			false, true);
+
+	/* xHC rejected the configure endpoint command for some reason, so we
+	 * leave the streams rings intact.
+	 */
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+		vdev->eps[ep_index].stream_info = NULL;
+		/* FIXME Unset maxPstreams in endpoint context and
+		 * update deq ptr to point to normal string ring.
+		 */
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS;
+		vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return 0;
+}
+
 /*
  * This submits a Reset Device Command, which will set the device state to 0,
  * set the device address to 0, and disable all the endpoints except the default
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ea389e9a493..dada2fb5926 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -26,8 +26,8 @@
 #include <linux/usb.h>
 #include <linux/timer.h>
 #include <linux/kernel.h>
+#include <linux/usb/hcd.h>
 
-#include "../core/hcd.h"
 /* Code sharing between pci-quirks and xhci hcd */
 #include	"xhci-ext-caps.h"
 
@@ -117,7 +117,7 @@ struct xhci_cap_regs {
 /* true: no secondary Stream ID Support */
 #define HCC_NSS(p)		((p) & (1 << 7))
 /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
-#define HCC_MAX_PSA		(1 << ((((p) >> 12) & 0xf) + 1))
+#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
 /* Extended Capabilities pointer from PCI base - section 5.3.6 */
 #define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
 
@@ -444,6 +444,7 @@ struct xhci_doorbell_array {
 
 /* Endpoint Target - bits 0:7 */
 #define EPI_TO_DB(p)		(((p) + 1) & 0xff)
+#define STREAM_ID_TO_DB(p)	(((p) & 0xffff) << 16)
 
 
 /**
@@ -585,6 +586,10 @@ struct xhci_ep_ctx {
 /* Interval - period between requests to an endpoint - 125u increments. */
 #define EP_INTERVAL(p)		((p & 0xff) << 16)
 #define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
+#define EP_MAXPSTREAMS_MASK	(0x1f << 10)
+#define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
+/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
+#define	EP_HAS_LSA		(1 << 15)
 
 /* ep_info2 bitmasks */
 /*
@@ -648,8 +653,50 @@ struct xhci_command {
 /* add context bitmasks */
 #define	ADD_EP(x)	(0x1 << x)
 
+struct xhci_stream_ctx {
+	/* 64-bit stream ring address, cycle state, and stream type */
+	u64	stream_ring;
+	/* offset 0x14 - 0x1f reserved for HC internal use */
+	u32	reserved[2];
+};
+
+/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
+#define	SCT_FOR_CTX(p)		(((p) << 1) & 0x7)
+/* Secondary stream array type, dequeue pointer is to a transfer ring */
+#define	SCT_SEC_TR		0
+/* Primary stream array type, dequeue pointer is to a transfer ring */
+#define	SCT_PRI_TR		1
+/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
+#define SCT_SSA_8		2
+#define SCT_SSA_16		3
+#define SCT_SSA_32		4
+#define SCT_SSA_64		5
+#define SCT_SSA_128		6
+#define SCT_SSA_256		7
+
+/* Assume no secondary streams for now */
+struct xhci_stream_info {
+	struct xhci_ring		**stream_rings;
+	/* Number of streams, including stream 0 (which drivers can't use) */
+	unsigned int			num_streams;
+	/* The stream context array may be bigger than
+	 * the number of streams the driver asked for
+	 */
+	struct xhci_stream_ctx		*stream_ctx_array;
+	unsigned int			num_stream_ctxs;
+	dma_addr_t			ctx_array_dma;
+	/* For mapping physical TRB addresses to segments in stream rings */
+	struct radix_tree_root		trb_address_map;
+	struct xhci_command		*free_streams_command;
+};
+
+#define	SMALL_STREAM_ARRAY_SIZE		256
+#define	MEDIUM_STREAM_ARRAY_SIZE	1024
+
 struct xhci_virt_ep {
 	struct xhci_ring		*ring;
+	/* Related to endpoints that are configured to use stream IDs only */
+	struct xhci_stream_info		*stream_info;
 	/* Temporary storage in case the configure endpoint command fails and we
 	 * have to restore the device state to the previous state
 	 */
@@ -658,11 +705,17 @@ struct xhci_virt_ep {
 #define SET_DEQ_PENDING		(1 << 0)
 #define EP_HALTED		(1 << 1)	/* For stall handling */
 #define EP_HALT_PENDING		(1 << 2)	/* For URB cancellation */
+/* Transitioning the endpoint to using streams, don't enqueue URBs */
+#define EP_GETTING_STREAMS	(1 << 3)
+#define EP_HAS_STREAMS		(1 << 4)
+/* Transitioning the endpoint to not using streams, don't enqueue URBs */
+#define EP_GETTING_NO_STREAMS	(1 << 5)
 	/* ----  Related to URB cancellation ---- */
 	struct list_head	cancelled_td_list;
 	/* The TRB that was last reported in a stopped endpoint ring */
 	union xhci_trb		*stopped_trb;
 	struct xhci_td		*stopped_td;
+	unsigned int		stopped_stream;
 	/* Watchdog timer for stop endpoint command to cancel URBs */
 	struct timer_list	stop_cmd_timer;
 	int			stop_cmds_pending;
@@ -710,14 +763,6 @@ struct xhci_device_context_array {
  */
 
 
-struct xhci_stream_ctx {
-	/* 64-bit stream ring address, cycle state, and stream type */
-	u64	stream_ring;
-	/* offset 0x14 - 0x1f reserved for HC internal use */
-	u32	reserved[2];
-};
-
-
 struct xhci_transfer_event {
 	/* 64-bit buffer address, or immediate data */
 	u64	buffer;
@@ -828,6 +873,10 @@ struct xhci_event_cmd {
 #define TRB_TO_EP_INDEX(p)		((((p) & (0x1f << 16)) >> 16) - 1)
 #define	EP_ID_FOR_TRB(p)		((((p) + 1) & 0x1f) << 16)
 
+/* Set TR Dequeue Pointer command TRB fields */
+#define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
+#define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
+
 
 /* Port Status Change Event TRB fields */
 /* Port ID - bits 31:24 */
@@ -952,6 +1001,10 @@ union xhci_trb {
 /* Allow two commands + a link TRB, along with any reserved command TRBs */
 #define MAX_RSVD_CMD_TRBS	(TRBS_PER_SEGMENT - 3)
 #define SEGMENT_SIZE		(TRBS_PER_SEGMENT*16)
+/* SEGMENT_SHIFT should be log2(SEGMENT_SIZE).
+ * Change this if you change TRBS_PER_SEGMENT!
+ */
+#define SEGMENT_SHIFT		10
 /* TRB buffer pointers can't cross 64KB boundaries */
 #define TRB_MAX_BUFF_SHIFT		16
 #define TRB_MAX_BUFF_SIZE	(1 << TRB_MAX_BUFF_SHIFT)
@@ -993,6 +1046,7 @@ struct xhci_ring {
 	 * if we own the TRB (if we are the consumer).  See section 4.9.1.
 	 */
 	u32			cycle_state;
+	unsigned int		stream_id;
 };
 
 struct xhci_erst_entry {
@@ -1088,6 +1142,8 @@ struct xhci_hcd {
 	/* DMA pools */
 	struct dma_pool	*device_pool;
 	struct dma_pool	*segment_pool;
+	struct dma_pool	*small_streams_pool;
+	struct dma_pool	*medium_streams_pool;
 
 #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
 	/* Poll the rings - for debugging */
@@ -1216,6 +1272,9 @@ void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
 char *xhci_get_slot_state(struct xhci_hcd *xhci,
 		struct xhci_container_ctx *ctx);
+void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_virt_ep *ep);
 
 /* xHCI memory management */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1242,6 +1301,29 @@ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
 		struct xhci_virt_device *virt_dev,
 		unsigned int ep_index);
+struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
+		unsigned int num_stream_ctxs,
+		unsigned int num_streams, gfp_t flags);
+void xhci_free_stream_info(struct xhci_hcd *xhci,
+		struct xhci_stream_info *stream_info);
+void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		struct xhci_stream_info *stream_info);
+void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
+		struct xhci_ep_ctx *ep_ctx,
+		struct xhci_virt_ep *ep);
+struct xhci_ring *xhci_dma_to_transfer_ring(
+		struct xhci_virt_ep *ep,
+		u64 address);
+struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
+		struct urb *urb);
+struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id);
+struct xhci_ring *xhci_stream_id_to_ring(
+		struct xhci_virt_device *dev,
+		unsigned int ep_index,
+		unsigned int stream_id);
 struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
 		bool allocate_in_ctx, bool allocate_completion,
 		gfp_t mem_flags);
@@ -1266,6 +1348,12 @@ int xhci_get_frame(struct usb_hcd *hcd);
 irqreturn_t xhci_irq(struct usb_hcd *hcd);
 int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
 int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
 int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
 			struct usb_tt *tt, gfp_t mem_flags);
@@ -1308,9 +1396,11 @@ int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
-		struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+		unsigned int stream_id, struct xhci_td *cur_td,
+		struct xhci_dequeue_state *state);
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id,
 		struct xhci_dequeue_state *deq_state);
 void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 		struct usb_device *udev, unsigned int ep_index);
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 094f91cbc57..1fa6ce3e4a2 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -259,7 +259,7 @@ static int appledisplay_probe(struct usb_interface *iface,
 	}
 
 	/* Allocate buffer for interrupt data */
-	pdata->urbdata = usb_buffer_alloc(pdata->udev, ACD_URB_BUFFER_LEN,
+	pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 		GFP_KERNEL, &pdata->urb->transfer_dma);
 	if (!pdata->urbdata) {
 		retval = -ENOMEM;
@@ -316,7 +316,7 @@ error:
 		if (pdata->urb) {
 			usb_kill_urb(pdata->urb);
 			if (pdata->urbdata)
-				usb_buffer_free(pdata->udev, ACD_URB_BUFFER_LEN,
+				usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 					pdata->urbdata, pdata->urb->transfer_dma);
 			usb_free_urb(pdata->urb);
 		}
@@ -337,7 +337,7 @@ static void appledisplay_disconnect(struct usb_interface *iface)
 		usb_kill_urb(pdata->urb);
 		cancel_delayed_work(&pdata->work);
 		backlight_device_unregister(pdata->bd);
-		usb_buffer_free(pdata->udev, ACD_URB_BUFFER_LEN,
+		usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
 			pdata->urbdata, pdata->urb->transfer_dma);
 		usb_free_urb(pdata->urb);
 		kfree(pdata->msgdata);
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 1edb6d36189..82e16630a78 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -73,7 +73,7 @@ static struct list_head ftdi_static_list;
 */
 #include "usb_u132.h"
 #include <asm/io.h>
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 
 	/* FIXME ohci.h is ONLY for internal use by the OHCI driver.
 	 * If you're going to try stuff like this, you need to split
@@ -734,7 +734,7 @@ static void ftdi_elan_write_bulk_callback(struct urb *urb)
                 dev_err(&ftdi->udev->dev, "urb=%p write bulk status received: %"
                         "d\n", urb, status);
         }
-        usb_buffer_free(urb->dev, urb->transfer_buffer_length,
+        usb_free_coherent(urb->dev, urb->transfer_buffer_length,
                 urb->transfer_buffer, urb->transfer_dma);
 }
 
@@ -795,7 +795,7 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi)
                         total_size);
                 return -ENOMEM;
         }
-        buf = usb_buffer_alloc(ftdi->udev, total_size, GFP_KERNEL,
+        buf = usb_alloc_coherent(ftdi->udev, total_size, GFP_KERNEL,
                 &urb->transfer_dma);
         if (!buf) {
                 dev_err(&ftdi->udev->dev, "could not get a buffer to write %d c"
@@ -829,7 +829,7 @@ static int ftdi_elan_command_engine(struct usb_ftdi *ftdi)
                 dev_err(&ftdi->udev->dev, "failed %d to submit urb %p to write "
                         "%d commands totaling %d bytes to the Uxxx\n", retval,
                         urb, command_size, total_size);
-                usb_buffer_free(ftdi->udev, total_size, buf, urb->transfer_dma);
+                usb_free_coherent(ftdi->udev, total_size, buf, urb->transfer_dma);
                 usb_free_urb(urb);
                 return retval;
         }
@@ -1167,7 +1167,7 @@ static ssize_t ftdi_elan_write(struct file *file,
                 retval = -ENOMEM;
                 goto error_1;
         }
-        buf = usb_buffer_alloc(ftdi->udev, count, GFP_KERNEL,
+        buf = usb_alloc_coherent(ftdi->udev, count, GFP_KERNEL,
                 &urb->transfer_dma);
         if (!buf) {
                 retval = -ENOMEM;
@@ -1192,7 +1192,7 @@ static ssize_t ftdi_elan_write(struct file *file,
 exit:
         return count;
 error_3:
-	usb_buffer_free(ftdi->udev, count, buf, urb->transfer_dma);
+	usb_free_coherent(ftdi->udev, count, buf, urb->transfer_dma);
 error_2:
 	usb_free_urb(urb);
 error_1:
@@ -1968,7 +1968,7 @@ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi)
                         "ence\n");
                 return -ENOMEM;
         }
-        buf = usb_buffer_alloc(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
+        buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
         if (!buf) {
                 dev_err(&ftdi->udev->dev, "could not get a buffer for flush seq"
                         "uence\n");
@@ -1985,7 +1985,7 @@ static int ftdi_elan_synchronize_flush(struct usb_ftdi *ftdi)
         if (retval) {
                 dev_err(&ftdi->udev->dev, "failed to submit urb containing the "
                         "flush sequence\n");
-                usb_buffer_free(ftdi->udev, i, buf, urb->transfer_dma);
+                usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma);
                 usb_free_urb(urb);
                 return -ENOMEM;
         }
@@ -2011,7 +2011,7 @@ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi)
                         "quence\n");
                 return -ENOMEM;
         }
-        buf = usb_buffer_alloc(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
+        buf = usb_alloc_coherent(ftdi->udev, I, GFP_KERNEL, &urb->transfer_dma);
         if (!buf) {
                 dev_err(&ftdi->udev->dev, "could not get a buffer for the reset"
                         " sequence\n");
@@ -2030,7 +2030,7 @@ static int ftdi_elan_synchronize_reset(struct usb_ftdi *ftdi)
         if (retval) {
                 dev_err(&ftdi->udev->dev, "failed to submit urb containing the "
                         "reset sequence\n");
-                usb_buffer_free(ftdi->udev, i, buf, urb->transfer_dma);
+                usb_free_coherent(ftdi->udev, i, buf, urb->transfer_dma);
                 usb_free_urb(urb);
                 return -ENOMEM;
         }
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index d3c85236388..7dc9d3c6998 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -239,8 +239,8 @@ static void iowarrior_write_callback(struct urb *urb)
 		    __func__, status);
 	}
 	/* free up our allocated buffer */
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 	/* tell a waiting writer the interrupt-out-pipe is available again */
 	atomic_dec(&dev->write_busy);
 	wake_up_interruptible(&dev->write_wait);
@@ -421,8 +421,8 @@ static ssize_t iowarrior_write(struct file *file,
 			dbg("%s Unable to allocate urb ", __func__);
 			goto error_no_urb;
 		}
-		buf = usb_buffer_alloc(dev->udev, dev->report_size,
-				       GFP_KERNEL, &int_out_urb->transfer_dma);
+		buf = usb_alloc_coherent(dev->udev, dev->report_size,
+					 GFP_KERNEL, &int_out_urb->transfer_dma);
 		if (!buf) {
 			retval = -ENOMEM;
 			dbg("%s Unable to allocate buffer ", __func__);
@@ -459,8 +459,8 @@ static ssize_t iowarrior_write(struct file *file,
 		break;
 	}
 error:
-	usb_buffer_free(dev->udev, dev->report_size, buf,
-			int_out_urb->transfer_dma);
+	usb_free_coherent(dev->udev, dev->report_size, buf,
+			  int_out_urb->transfer_dma);
 error_no_buffer:
 	usb_free_urb(int_out_urb);
 error_no_urb:
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index aae95a009bd..30d930386b6 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -47,7 +47,6 @@
 #include <linux/spinlock.h>
 #include <linux/kref.h>
 #include <linux/usb.h>
-#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 
 #include "sisusb.h"
@@ -2416,14 +2415,11 @@ sisusb_open(struct inode *inode, struct file *file)
 	struct usb_interface *interface;
 	int subminor = iminor(inode);
 
-	lock_kernel();
 	if (!(interface = usb_find_interface(&sisusb_driver, subminor))) {
-		unlock_kernel();
 		return -ENODEV;
 	}
 
 	if (!(sisusb = usb_get_intfdata(interface))) {
-		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -2431,13 +2427,11 @@ sisusb_open(struct inode *inode, struct file *file)
 
 	if (!sisusb->present || !sisusb->ready) {
 		mutex_unlock(&sisusb->lock);
-		unlock_kernel();
 		return -ENODEV;
 	}
 
 	if (sisusb->isopen) {
 		mutex_unlock(&sisusb->lock);
-		unlock_kernel();
 		return -EBUSY;
 	}
 
@@ -2446,13 +2440,11 @@ sisusb_open(struct inode *inode, struct file *file)
 			if (sisusb_init_gfxdevice(sisusb, 0)) {
 				mutex_unlock(&sisusb->lock);
 				dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n");
-				unlock_kernel();
 				return -EIO;
 			}
 		} else {
 			mutex_unlock(&sisusb->lock);
 			dev_err(&sisusb->sisusb_dev->dev, "Device not attached to USB 2.0 hub\n");
-			unlock_kernel();
 			return -EIO;
 		}
 	}
@@ -2465,7 +2457,6 @@ sisusb_open(struct inode *inode, struct file *file)
 	file->private_data = sisusb;
 
 	mutex_unlock(&sisusb->lock);
-	unlock_kernel();
 
 	return 0;
 }
@@ -2974,13 +2965,12 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct sisusb_usb_data *sisusb;
 	struct sisusb_info x;
 	struct sisusb_command y;
-	int	retval = 0;
+	long retval = 0;
 	u32 __user *argp = (u32 __user *)arg;
 
 	if (!(sisusb = (struct sisusb_usb_data *)file->private_data))
 		return -ENODEV;
 
-	lock_kernel();
 	mutex_lock(&sisusb->lock);
 
 	/* Sanity check */
@@ -3039,7 +3029,6 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 err_out:
 	mutex_unlock(&sisusb->lock);
-	unlock_kernel();
 	return retval;
 }
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index b271b0557a1..411e605f448 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -1187,9 +1187,9 @@ sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
 		 * And so is the hi_font_mask.
 		 */
 		for (i = 0; i < MAX_NR_CONSOLES; i++) {
-			struct vc_data *c = vc_cons[i].d;
-			if (c && c->vc_sw == &sisusb_con)
-				c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
+			struct vc_data *d = vc_cons[i].d;
+			if (d && d->vc_sw == &sisusb_con)
+				d->vc_hi_font_mask = ch512 ? 0x0800 : 0;
 		}
 
 		sisusb->current_font_512 = ch512;
@@ -1249,7 +1249,7 @@ sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot,
 		mutex_unlock(&sisusb->lock);
 
 	if (dorecalc && c) {
-		int i, rows = c->vc_scan_lines / fh;
+		int rows = c->vc_scan_lines / fh;
 
 		/* Now adjust our consoles' size */
 
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 90aede90553..7828c764b32 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -205,8 +205,8 @@ static void lcd_write_bulk_callback(struct urb *urb)
 	}
 
 	/* free up our allocated buffer */
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 	up(&dev->limit_sem);
 }
 
@@ -234,7 +234,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz
 		goto err_no_buf;
 	}
 	
-	buf = usb_buffer_alloc(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
+	buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, &urb->transfer_dma);
 	if (!buf) {
 		retval = -ENOMEM;
 		goto error;
@@ -268,7 +268,7 @@ exit:
 error_unanchor:
 	usb_unanchor_urb(urb);
 error:
-	usb_buffer_free(dev->udev, count, buf, urb->transfer_dma);
+	usb_free_coherent(dev->udev, count, buf, urb->transfer_dma);
 	usb_free_urb(urb);
 err_no_buf:
 	up(&dev->limit_sem);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index a21cce6f740..16dffe99d9f 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -202,7 +202,7 @@ static struct urb *simple_alloc_urb (
 	urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
 	if (usb_pipein (pipe))
 		urb->transfer_flags |= URB_SHORT_NOT_OK;
-	urb->transfer_buffer = usb_buffer_alloc (udev, bytes, GFP_KERNEL,
+	urb->transfer_buffer = usb_alloc_coherent (udev, bytes, GFP_KERNEL,
 			&urb->transfer_dma);
 	if (!urb->transfer_buffer) {
 		usb_free_urb (urb);
@@ -272,8 +272,8 @@ static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb)
 
 static void simple_free_urb (struct urb *urb)
 {
-	usb_buffer_free (urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 	usb_free_urb (urb);
 }
 
@@ -977,15 +977,13 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
 		if (!u)
 			goto cleanup;
 
-		reqp = usb_buffer_alloc (udev, sizeof *reqp, GFP_KERNEL,
-				&u->setup_dma);
+		reqp = kmalloc(sizeof *reqp, GFP_KERNEL);
 		if (!reqp)
 			goto cleanup;
 		reqp->setup = req;
 		reqp->number = i % NUM_SUBCASES;
 		reqp->expected = expected;
 		u->setup_packet = (char *) &reqp->setup;
-		u->transfer_flags |= URB_NO_SETUP_DMA_MAP;
 
 		u->context = &context;
 		u->complete = ctrl_complete;
@@ -1017,10 +1015,7 @@ cleanup:
 		if (!urb [i])
 			continue;
 		urb [i]->dev = udev;
-		if (urb [i]->setup_packet)
-			usb_buffer_free (udev, sizeof (struct usb_ctrlrequest),
-					urb [i]->setup_packet,
-					urb [i]->setup_dma);
+		kfree(urb[i]->setup_packet);
 		simple_free_urb (urb [i]);
 	}
 	kfree (urb);
@@ -1421,7 +1416,7 @@ static struct urb *iso_alloc_urb (
 
 	urb->number_of_packets = packets;
 	urb->transfer_buffer_length = bytes;
-	urb->transfer_buffer = usb_buffer_alloc (udev, bytes, GFP_KERNEL,
+	urb->transfer_buffer = usb_alloc_coherent (udev, bytes, GFP_KERNEL,
 			&urb->transfer_dma);
 	if (!urb->transfer_buffer) {
 		usb_free_urb (urb);
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index ddf7f9a1b33..e7fa3644ba6 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -416,13 +416,13 @@ static unsigned int mon_bin_get_data(const struct mon_reader_bin *rp,
 
 	} else {
 		/* If IOMMU coalescing occurred, we cannot trust sg_page */
-		if (urb->sg->nents != urb->num_sgs) {
+		if (urb->transfer_flags & URB_DMA_SG_COMBINED) {
 			*flag = 'D';
 			return length;
 		}
 
 		/* Copy up to the first non-addressable segment */
-		for_each_sg(urb->sg->sg, sg, urb->num_sgs, i) {
+		for_each_sg(urb->sg, sg, urb->num_sgs, i) {
 			if (length == 0 || PageHighMem(sg_page(sg)))
 				break;
 			this_len = min_t(unsigned int, sg->length, length);
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index e4af18b93c7..812dc288bb8 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -9,12 +9,13 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/usb/hcd.h>
 #include <linux/slab.h>
 #include <linux/notifier.h>
 #include <linux/mutex.h>
 
 #include "usb_mon.h"
-#include "../core/hcd.h"
+
 
 static void mon_stop(struct mon_bus *mbus);
 static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus);
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 4d0be130f49..a545d65f6e5 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -159,11 +159,9 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
 		if (src == NULL)
 			return 'Z';	/* '0' would be not as pretty. */
 	} else {
-		struct scatterlist *sg = urb->sg->sg;
+		struct scatterlist *sg = urb->sg;
 
-		/* If IOMMU coalescing occurred, we cannot trust sg_page */
-		if (urb->sg->nents != urb->num_sgs ||
-				PageHighMem(sg_page(sg)))
+		if (PageHighMem(sg_page(sg)))
 			return 'D';
 
 		/* For the text interface we copy only the first sg buffer */
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 07fe490b44d..cfd38edfcf9 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -38,6 +38,7 @@ config USB_MUSB_SOC
 	default y if ARCH_DAVINCI
 	default y if ARCH_OMAP2430
 	default y if ARCH_OMAP3
+	default y if ARCH_OMAP4
 	default y if (BF54x && !BF544)
 	default y if (BF52x && !BF522 && !BF523)
 
@@ -50,6 +51,9 @@ comment "OMAP 243x high speed USB support"
 comment "OMAP 343x high speed USB support"
 	depends on USB_MUSB_HDRC && ARCH_OMAP3
 
+comment "OMAP 44xx high speed USB support"
+	depends on USB_MUSB_HDRC && ARCH_OMAP4
+
 comment "Blackfin high speed USB Support"
 	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 
@@ -153,7 +157,7 @@ config MUSB_PIO_ONLY
 config USB_INVENTRA_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN
+	default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
 	help
 	  Enable DMA transfers using Mentor's engine.
 
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 3a485dabebb..9705f716386 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -22,6 +22,10 @@ ifeq ($(CONFIG_ARCH_OMAP3430),y)
 	musb_hdrc-objs	+= omap2430.o
 endif
 
+ifeq ($(CONFIG_ARCH_OMAP4),y)
+	musb_hdrc-objs  += omap2430.o
+endif
+
 ifeq ($(CONFIG_BF54x),y)
 	musb_hdrc-objs	+= blackfin.o
 endif
@@ -38,6 +42,10 @@ ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
 	musb_hdrc-objs		+= musb_virthub.o musb_host.o
 endif
 
+ifeq ($(CONFIG_DEBUG_FS),y)
+	musb_hdrc-objs		+= musb_debugfs.o
+endif
+
 # the kconfig must guarantee that only one of the
 # possible I/O schemes will be enabled at a time ...
 # PIO only, or DMA (several potential schemes).
@@ -64,12 +72,6 @@ endif
 
 ################################################################################
 
-# FIXME remove all these extra "-DMUSB_* things, stick to CONFIG_*
-
-ifeq ($(CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID),y)
-	EXTRA_CFLAGS += -DMUSB_AHB_ID
-endif
-
 # Debugging
 
 ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index ec8d324237f..b611420a805 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -170,6 +170,13 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
 		retval = musb_interrupt(musb);
 	}
 
+	/* Start sampling ID pin, when plug is removed from MUSB */
+	if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
+		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+		musb->a_wait_bcon = TIMER_DELAY;
+	}
+
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	return retval;
@@ -180,6 +187,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 	struct musb *musb = (void *)_musb;
 	unsigned long flags;
 	u16 val;
+	static u8 toggle;
 
 	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->state) {
@@ -187,10 +195,44 @@ static void musb_conn_timer_handler(unsigned long _musb)
 	case OTG_STATE_A_WAIT_BCON:
 		/* Start a new session */
 		val = musb_readw(musb->mregs, MUSB_DEVCTL);
+		val &= ~MUSB_DEVCTL_SESSION;
+		musb_writew(musb->mregs, MUSB_DEVCTL, val);
 		val |= MUSB_DEVCTL_SESSION;
 		musb_writew(musb->mregs, MUSB_DEVCTL, val);
+		/* Check if musb is host or peripheral. */
+		val = musb_readw(musb->mregs, MUSB_DEVCTL);
+
+		if (!(val & MUSB_DEVCTL_BDEVICE)) {
+			gpio_set_value(musb->config->gpio_vrsel, 1);
+			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+		} else {
+			gpio_set_value(musb->config->gpio_vrsel, 0);
+			/* Ignore VBUSERROR and SUSPEND IRQ */
+			val = musb_readb(musb->mregs, MUSB_INTRUSBE);
+			val &= ~MUSB_INTR_VBUSERROR;
+			musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
 
+			val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
+			musb_writeb(musb->mregs, MUSB_INTRUSB, val);
+			if (is_otg_enabled(musb))
+				musb->xceiv->state = OTG_STATE_B_IDLE;
+			else
+				musb_writeb(musb->mregs, MUSB_POWER, MUSB_POWER_HSENAB);
+		}
+		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+		break;
+	case OTG_STATE_B_IDLE:
+
+		if (!is_peripheral_enabled(musb))
+			break;
+		/* Start a new session.  It seems that MUSB needs taking
+		 * some time to recognize the type of the plug inserted?
+		 */
+		val = musb_readw(musb->mregs, MUSB_DEVCTL);
+		val |= MUSB_DEVCTL_SESSION;
+		musb_writew(musb->mregs, MUSB_DEVCTL, val);
 		val = musb_readw(musb->mregs, MUSB_DEVCTL);
+
 		if (!(val & MUSB_DEVCTL_BDEVICE)) {
 			gpio_set_value(musb->config->gpio_vrsel, 1);
 			musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
@@ -205,12 +247,27 @@ static void musb_conn_timer_handler(unsigned long _musb)
 			val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
 			musb_writeb(musb->mregs, MUSB_INTRUSB, val);
 
-			val = MUSB_POWER_HSENAB;
-			musb_writeb(musb->mregs, MUSB_POWER, val);
+			/* Toggle the Soft Conn bit, so that we can response to
+			 * the inserting of either A-plug or B-plug.
+			 */
+			if (toggle) {
+				val = musb_readb(musb->mregs, MUSB_POWER);
+				val &= ~MUSB_POWER_SOFTCONN;
+				musb_writeb(musb->mregs, MUSB_POWER, val);
+				toggle = 0;
+			} else {
+				val = musb_readb(musb->mregs, MUSB_POWER);
+				val |= MUSB_POWER_SOFTCONN;
+				musb_writeb(musb->mregs, MUSB_POWER, val);
+				toggle = 1;
+			}
+			/* The delay time is set to 1/4 second by default,
+			 * shortening it, if accelerating A-plug detection
+			 * is needed in OTG mode.
+			 */
+			mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY / 4);
 		}
-		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 		break;
-
 	default:
 		DBG(1, "%s state not handled\n", otg_state_string(musb));
 		break;
@@ -222,7 +279,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 
 void musb_platform_enable(struct musb *musb)
 {
-	if (is_host_enabled(musb)) {
+	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 		musb->a_wait_bcon = TIMER_DELAY;
 	}
@@ -232,16 +289,12 @@ void musb_platform_disable(struct musb *musb)
 {
 }
 
-static void bfin_vbus_power(struct musb *musb, int is_on, int sleeping)
-{
-}
-
 static void bfin_set_vbus(struct musb *musb, int is_on)
 {
-	if (is_on)
-		gpio_set_value(musb->config->gpio_vrsel, 1);
-	else
-		gpio_set_value(musb->config->gpio_vrsel, 0);
+	int value = musb->config->gpio_vrsel_active;
+	if (!is_on)
+		value = !value;
+	gpio_set_value(musb->config->gpio_vrsel, value);
 
 	DBG(1, "VBUS %s, devctl %02x "
 		/* otg %3x conf %08x prcm %08x */ "\n",
@@ -256,7 +309,7 @@ static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
 
 void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 {
-	if (is_host_enabled(musb))
+	if (!is_otg_enabled(musb) && is_host_enabled(musb))
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 }
 
@@ -270,7 +323,7 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
 {
 
 	/*
@@ -339,23 +392,10 @@ int __init musb_platform_init(struct musb *musb)
 	return 0;
 }
 
-int musb_platform_suspend(struct musb *musb)
-{
-	return 0;
-}
-
-int musb_platform_resume(struct musb *musb)
-{
-	return 0;
-}
-
-
 int musb_platform_exit(struct musb *musb)
 {
 
-	bfin_vbus_power(musb, 0 /*off*/, 1);
 	gpio_free(musb->config->gpio_vrsel);
-	musb_platform_suspend(musb);
 
 	return 0;
 }
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index ce2e16fee0d..57624361c1d 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -376,7 +376,7 @@ int musb_platform_set_mode(struct musb *musb, u8 mode)
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 705cc4ad873..fad70bc8355 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -149,6 +149,87 @@ static inline struct musb *dev_to_musb(struct device *dev)
 
 /*-------------------------------------------------------------------------*/
 
+#ifndef CONFIG_BLACKFIN
+static int musb_ulpi_read(struct otg_transceiver *otg, u32 offset)
+{
+	void __iomem *addr = otg->io_priv;
+	int	i = 0;
+	u8	r;
+	u8	power;
+
+	/* Make sure the transceiver is not in low power mode */
+	power = musb_readb(addr, MUSB_POWER);
+	power &= ~MUSB_POWER_SUSPENDM;
+	musb_writeb(addr, MUSB_POWER, power);
+
+	/* REVISIT: musbhdrc_ulpi_an.pdf recommends setting the
+	 * ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
+	 */
+
+	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
+			MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
+
+	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+				& MUSB_ULPI_REG_CMPLT)) {
+		i++;
+		if (i == 10000) {
+			DBG(3, "ULPI read timed out\n");
+			return -ETIMEDOUT;
+		}
+
+	}
+	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+	r &= ~MUSB_ULPI_REG_CMPLT;
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+	return musb_readb(addr, MUSB_ULPI_REG_DATA);
+}
+
+static int musb_ulpi_write(struct otg_transceiver *otg,
+		u32 offset, u32 data)
+{
+	void __iomem *addr = otg->io_priv;
+	int	i = 0;
+	u8	r = 0;
+	u8	power;
+
+	/* Make sure the transceiver is not in low power mode */
+	power = musb_readb(addr, MUSB_POWER);
+	power &= ~MUSB_POWER_SUSPENDM;
+	musb_writeb(addr, MUSB_POWER, power);
+
+	musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+	musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
+
+	while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
+				& MUSB_ULPI_REG_CMPLT)) {
+		i++;
+		if (i == 10000) {
+			DBG(3, "ULPI write timed out\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	r = musb_readb(addr, MUSB_ULPI_REG_CONTROL);
+	r &= ~MUSB_ULPI_REG_CMPLT;
+	musb_writeb(addr, MUSB_ULPI_REG_CONTROL, r);
+
+	return 0;
+}
+#else
+#define musb_ulpi_read(a, b)		NULL
+#define musb_ulpi_write(a, b, c)	NULL
+#endif
+
+static struct otg_io_access_ops musb_ulpi_access = {
+	.read = musb_ulpi_read,
+	.write = musb_ulpi_write,
+};
+
+/*-------------------------------------------------------------------------*/
+
 #if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
 
 /*
@@ -353,8 +434,7 @@ void musb_hnp_stop(struct musb *musb)
 	 * which cause occasional OPT A "Did not receive reset after connect"
 	 * errors.
 	 */
-	musb->port1_status &=
-		~(1 << USB_PORT_FEAT_C_CONNECTION);
+	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
 #endif
@@ -530,8 +610,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				musb_writeb(mbase, MUSB_DEVCTL, devctl);
 			} else {
 				musb->port1_status |=
-					  (1 << USB_PORT_FEAT_OVER_CURRENT)
-					| (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+					  USB_PORT_STAT_OVERCURRENT
+					| (USB_PORT_STAT_C_OVERCURRENT << 16);
 			}
 			break;
 		default:
@@ -986,7 +1066,8 @@ static void musb_shutdown(struct platform_device *pdev)
  * more than selecting one of a bunch of predefined configurations.
  */
 #if defined(CONFIG_USB_TUSB6010) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
+	|| defined(CONFIG_ARCH_OMAP4)
 static ushort __initdata fifo_mode = 4;
 #else
 static ushort __initdata fifo_mode = 2;
@@ -996,24 +1077,13 @@ static ushort __initdata fifo_mode = 2;
 module_param(fifo_mode, ushort, 0);
 MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
 
-
-enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
-enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
-
-struct fifo_cfg {
-	u8		hw_ep_num;
-	enum fifo_style	style;
-	enum buf_mode	mode;
-	u16		maxpacket;
-};
-
 /*
  * tables defining fifo_mode values.  define more if you like.
  * for host side, make sure both halves of ep1 are set up.
  */
 
 /* mode 0 - fits in 2KB */
-static struct fifo_cfg __initdata mode_0_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_0_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, },
@@ -1022,7 +1092,7 @@ static struct fifo_cfg __initdata mode_0_cfg[] = {
 };
 
 /* mode 1 - fits in 4KB */
-static struct fifo_cfg __initdata mode_1_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_1_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_RXTX, .maxpacket = 512, .mode = BUF_DOUBLE, },
@@ -1031,7 +1101,7 @@ static struct fifo_cfg __initdata mode_1_cfg[] = {
 };
 
 /* mode 2 - fits in 4KB */
-static struct fifo_cfg __initdata mode_2_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_2_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1041,7 +1111,7 @@ static struct fifo_cfg __initdata mode_2_cfg[] = {
 };
 
 /* mode 3 - fits in 4KB */
-static struct fifo_cfg __initdata mode_3_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_3_cfg[] = {
 { .hw_ep_num = 1, .style = FIFO_TX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 1, .style = FIFO_RX,   .maxpacket = 512, .mode = BUF_DOUBLE, },
 { .hw_ep_num = 2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1051,7 +1121,7 @@ static struct fifo_cfg __initdata mode_3_cfg[] = {
 };
 
 /* mode 4 - fits in 16KB */
-static struct fifo_cfg __initdata mode_4_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_4_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1082,7 +1152,7 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
 };
 
 /* mode 5 - fits in 8KB */
-static struct fifo_cfg __initdata mode_5_cfg[] = {
+static struct musb_fifo_cfg __initdata mode_5_cfg[] = {
 { .hw_ep_num =  1, .style = FIFO_TX,   .maxpacket = 512, },
 { .hw_ep_num =  1, .style = FIFO_RX,   .maxpacket = 512, },
 { .hw_ep_num =  2, .style = FIFO_TX,   .maxpacket = 512, },
@@ -1120,7 +1190,7 @@ static struct fifo_cfg __initdata mode_5_cfg[] = {
  */
 static int __init
 fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
-		const struct fifo_cfg *cfg, u16 offset)
+		const struct musb_fifo_cfg *cfg, u16 offset)
 {
 	void __iomem	*mbase = musb->mregs;
 	int	size = 0;
@@ -1191,17 +1261,23 @@ fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
 	return offset + (maxpacket << ((c_size & MUSB_FIFOSZ_DPB) ? 1 : 0));
 }
 
-static struct fifo_cfg __initdata ep0_cfg = {
+static struct musb_fifo_cfg __initdata ep0_cfg = {
 	.style = FIFO_RXTX, .maxpacket = 64,
 };
 
 static int __init ep_config_from_table(struct musb *musb)
 {
-	const struct fifo_cfg	*cfg;
+	const struct musb_fifo_cfg	*cfg;
 	unsigned		i, n;
 	int			offset;
 	struct musb_hw_ep	*hw_ep = musb->endpoints;
 
+	if (musb->config->fifo_cfg) {
+		cfg = musb->config->fifo_cfg;
+		n = musb->config->fifo_cfg_size;
+		goto done;
+	}
+
 	switch (fifo_mode) {
 	default:
 		fifo_mode = 0;
@@ -1236,6 +1312,7 @@ static int __init ep_config_from_table(struct musb *musb)
 			musb_driver_name, fifo_mode);
 
 
+done:
 	offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0);
 	/* assert(offset > 0) */
 
@@ -1461,7 +1538,8 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || \
+	defined(CONFIG_ARCH_OMAP4)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
@@ -1948,7 +2026,7 @@ bad_config:
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
 	 */
 	musb->isr = generic_interrupt;
-	status = musb_platform_init(musb);
+	status = musb_platform_init(musb, plat->board_data);
 	if (status < 0)
 		goto fail2;
 
@@ -1957,6 +2035,11 @@ bad_config:
 		goto fail3;
 	}
 
+	if (!musb->xceiv->io_ops) {
+		musb->xceiv->io_priv = musb->mregs;
+		musb->xceiv->io_ops = &musb_ulpi_access;
+	}
+
 #ifndef CONFIG_MUSB_PIO_ONLY
 	if (use_dma && dev->dma_mask) {
 		struct dma_controller	*c;
@@ -2057,10 +2140,14 @@ bad_config:
 	if (status < 0)
 		goto fail3;
 
+	status = musb_init_debugfs(musb);
+	if (status < 0)
+		goto fail4;
+
 #ifdef CONFIG_SYSFS
 	status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
 	if (status)
-		goto fail4;
+		goto fail5;
 #endif
 
 	dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
@@ -2077,6 +2164,9 @@ bad_config:
 
 	return 0;
 
+fail5:
+	musb_exit_debugfs(musb);
+
 fail4:
 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
 		usb_remove_hcd(musb_to_hcd(musb));
@@ -2153,6 +2243,7 @@ static int __exit musb_remove(struct platform_device *pdev)
 	 *  - Peripheral mode: peripheral is deactivated (or never-activated)
 	 *  - OTG mode: both roles are deactivated (or never-activated)
 	 */
+	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (musb->board_mode == MUSB_HOST)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index ac17b004909..b22d02dea7d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -69,7 +69,7 @@ struct musb_ep;
 #include "musb_regs.h"
 
 #include "musb_gadget.h"
-#include "../core/hcd.h"
+#include <linux/usb/hcd.h>
 #include "musb_host.h"
 
 
@@ -213,7 +213,8 @@ enum musb_g_ep0_state {
  */
 
 #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
-		|| defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN)
+		|| defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN) \
+		|| defined(CONFIG_ARCH_OMAP4)
 /* REVISIT indexed access seemed to
  * misbehave (on DaVinci) for at least peripheral IN ...
  */
@@ -596,7 +597,8 @@ extern void musb_hnp_stop(struct musb *musb);
 extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
 
 #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+	defined(CONFIG_ARCH_OMAP4)
 extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
 #else
 #define musb_platform_try_idle(x, y)		do {} while (0)
@@ -608,7 +610,7 @@ extern int musb_platform_get_vbus_status(struct musb *musb);
 #define musb_platform_get_vbus_status(x)	0
 #endif
 
-extern int __init musb_platform_init(struct musb *musb);
+extern int __init musb_platform_init(struct musb *musb, void *board_data);
 extern int musb_platform_exit(struct musb *musb);
 
 #endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index 9fc1db44c72..d73afdbde3e 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -59,4 +59,17 @@ static inline int _dbg_level(unsigned l)
 
 extern const char *otg_state_string(struct musb *);
 
+#ifdef CONFIG_DEBUG_FS
+extern int musb_init_debugfs(struct musb *musb);
+extern void musb_exit_debugfs(struct musb *musb);
+#else
+static inline int musb_init_debugfs(struct musb *musb)
+{
+	return 0;
+}
+static inline void musb_exit_debugfs(struct musb *musb)
+{
+}
+#endif
+
 #endif				/*  __MUSB_LINUX_DEBUG_H__ */
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
new file mode 100644
index 00000000000..bba76af0c0c
--- /dev/null
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -0,0 +1,294 @@
+/*
+ * MUSB OTG driver debugfs support
+ *
+ * Copyright 2010 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#ifdef	CONFIG_ARM
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <asm/mach-types.h>
+#endif
+
+#include <asm/uaccess.h>
+
+#include "musb_core.h"
+#include "musb_debug.h"
+
+#ifdef CONFIG_ARCH_DAVINCI
+#include "davinci.h"
+#endif
+
+struct musb_register_map {
+	char			*name;
+	unsigned		offset;
+	unsigned		size;
+};
+
+static const struct musb_register_map musb_regmap[] = {
+	{ "FAddr",		0x00,	8 },
+	{ "Power",		0x01,	8 },
+	{ "Frame",		0x0c,	16 },
+	{ "Index",		0x0e,	8 },
+	{ "Testmode",		0x0f,	8 },
+	{ "TxMaxPp",		0x10,	16 },
+	{ "TxCSRp",		0x12,	16 },
+	{ "RxMaxPp",		0x14,	16 },
+	{ "RxCSR",		0x16,	16 },
+	{ "RxCount",		0x18,	16 },
+	{ "ConfigData",		0x1f,	8 },
+	{ "DevCtl",		0x60,	8 },
+	{ "MISC",		0x61,	8 },
+	{ "TxFIFOsz",		0x62,	8 },
+	{ "RxFIFOsz",		0x63,	8 },
+	{ "TxFIFOadd",		0x64,	16 },
+	{ "RxFIFOadd",		0x66,	16 },
+	{ "VControl",		0x68,	32 },
+	{ "HWVers",		0x6C,	16 },
+	{ "EPInfo",		0x78,	8 },
+	{ "RAMInfo",		0x79,	8 },
+	{ "LinkInfo",		0x7A,	8 },
+	{ "VPLen",		0x7B,	8 },
+	{ "HS_EOF1",		0x7C,	8 },
+	{ "FS_EOF1",		0x7D,	8 },
+	{ "LS_EOF1",		0x7E,	8 },
+	{ "SOFT_RST",		0x7F,	8 },
+	{ "DMA_CNTLch0",	0x204,	16 },
+	{ "DMA_ADDRch0",	0x208,	16 },
+	{ "DMA_COUNTch0",	0x20C,	16 },
+	{ "DMA_CNTLch1",	0x214,	16 },
+	{ "DMA_ADDRch1",	0x218,	16 },
+	{ "DMA_COUNTch1",	0x21C,	16 },
+	{ "DMA_CNTLch2",	0x224,	16 },
+	{ "DMA_ADDRch2",	0x228,	16 },
+	{ "DMA_COUNTch2",	0x22C,	16 },
+	{ "DMA_CNTLch3",	0x234,	16 },
+	{ "DMA_ADDRch3",	0x238,	16 },
+	{ "DMA_COUNTch3",	0x23C,	16 },
+	{ "DMA_CNTLch4",	0x244,	16 },
+	{ "DMA_ADDRch4",	0x248,	16 },
+	{ "DMA_COUNTch4",	0x24C,	16 },
+	{ "DMA_CNTLch5",	0x254,	16 },
+	{ "DMA_ADDRch5",	0x258,	16 },
+	{ "DMA_COUNTch5",	0x25C,	16 },
+	{ "DMA_CNTLch6",	0x264,	16 },
+	{ "DMA_ADDRch6",	0x268,	16 },
+	{ "DMA_COUNTch6",	0x26C,	16 },
+	{ "DMA_CNTLch7",	0x274,	16 },
+	{ "DMA_ADDRch7",	0x278,	16 },
+	{ "DMA_COUNTch7",	0x27C,	16 },
+	{  }	/* Terminating Entry */
+};
+
+static struct dentry *musb_debugfs_root;
+
+static int musb_regdump_show(struct seq_file *s, void *unused)
+{
+	struct musb		*musb = s->private;
+	unsigned		i;
+
+	seq_printf(s, "MUSB (M)HDRC Register Dump\n");
+
+	for (i = 0; i < ARRAY_SIZE(musb_regmap); i++) {
+		switch (musb_regmap[i].size) {
+		case 8:
+			seq_printf(s, "%-12s: %02x\n", musb_regmap[i].name,
+					musb_readb(musb->mregs, musb_regmap[i].offset));
+			break;
+		case 16:
+			seq_printf(s, "%-12s: %04x\n", musb_regmap[i].name,
+					musb_readw(musb->mregs, musb_regmap[i].offset));
+			break;
+		case 32:
+			seq_printf(s, "%-12s: %08x\n", musb_regmap[i].name,
+					musb_readl(musb->mregs, musb_regmap[i].offset));
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int musb_regdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, musb_regdump_show, inode->i_private);
+}
+
+static int musb_test_mode_show(struct seq_file *s, void *unused)
+{
+	struct musb		*musb = s->private;
+	unsigned		test;
+
+	test = musb_readb(musb->mregs, MUSB_TESTMODE);
+
+	if (test & MUSB_TEST_FORCE_HOST)
+		seq_printf(s, "force host\n");
+
+	if (test & MUSB_TEST_FIFO_ACCESS)
+		seq_printf(s, "fifo access\n");
+
+	if (test & MUSB_TEST_FORCE_FS)
+		seq_printf(s, "force full-speed\n");
+
+	if (test & MUSB_TEST_FORCE_HS)
+		seq_printf(s, "force high-speed\n");
+
+	if (test & MUSB_TEST_PACKET)
+		seq_printf(s, "test packet\n");
+
+	if (test & MUSB_TEST_K)
+		seq_printf(s, "test K\n");
+
+	if (test & MUSB_TEST_J)
+		seq_printf(s, "test J\n");
+
+	if (test & MUSB_TEST_SE0_NAK)
+		seq_printf(s, "test SE0 NAK\n");
+
+	return 0;
+}
+
+static const struct file_operations musb_regdump_fops = {
+	.open			= musb_regdump_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+static int musb_test_mode_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+
+	return single_open(file, musb_test_mode_show, inode->i_private);
+}
+
+static ssize_t musb_test_mode_write(struct file *file,
+		const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct musb		*musb = file->private_data;
+	u8			test = 0;
+	char			buf[18];
+
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	if (!strncmp(buf, "force host", 9))
+		test = MUSB_TEST_FORCE_HOST;
+
+	if (!strncmp(buf, "fifo access", 11))
+		test = MUSB_TEST_FIFO_ACCESS;
+
+	if (!strncmp(buf, "force full-speed", 15))
+		test = MUSB_TEST_FORCE_FS;
+
+	if (!strncmp(buf, "force high-speed", 15))
+		test = MUSB_TEST_FORCE_HS;
+
+	if (!strncmp(buf, "test packet", 10)) {
+		test = MUSB_TEST_PACKET;
+		musb_load_testpacket(musb);
+	}
+
+	if (!strncmp(buf, "test K", 6))
+		test = MUSB_TEST_K;
+
+	if (!strncmp(buf, "test J", 6))
+		test = MUSB_TEST_J;
+
+	if (!strncmp(buf, "test SE0 NAK", 12))
+		test = MUSB_TEST_SE0_NAK;
+
+	musb_writeb(musb->mregs, MUSB_TESTMODE, test);
+
+	return count;
+}
+
+static const struct file_operations musb_test_mode_fops = {
+	.open			= musb_test_mode_open,
+	.write			= musb_test_mode_write,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.release		= single_release,
+};
+
+int __init musb_init_debugfs(struct musb *musb)
+{
+	struct dentry		*root;
+	struct dentry		*file;
+	int			ret;
+
+	root = debugfs_create_dir("musb", NULL);
+	if (IS_ERR(root)) {
+		ret = PTR_ERR(root);
+		goto err0;
+	}
+
+	file = debugfs_create_file("regdump", S_IRUGO, root, musb,
+			&musb_regdump_fops);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto err1;
+	}
+
+	file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR,
+			root, musb, &musb_test_mode_fops);
+	if (IS_ERR(file)) {
+		ret = PTR_ERR(file);
+		goto err1;
+	}
+
+	musb_debugfs_root = root;
+
+	return 0;
+
+err1:
+	debugfs_remove_recursive(root);
+
+err0:
+	return ret;
+}
+
+void /* __init_or_exit */ musb_exit_debugfs(struct musb *musb)
+{
+	debugfs_remove_recursive(musb_debugfs_root);
+}
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 53d06451f82..21b9788d024 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -351,6 +351,31 @@ __acquires(musb->lock)
 						musb->test_mode_nr =
 							MUSB_TEST_PACKET;
 						break;
+
+					case 0xc0:
+						/* TEST_FORCE_HS */
+						pr_debug("TEST_FORCE_HS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_HS;
+						break;
+					case 0xc1:
+						/* TEST_FORCE_FS */
+						pr_debug("TEST_FORCE_FS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_FS;
+						break;
+					case 0xc2:
+						/* TEST_FIFO_ACCESS */
+						pr_debug("TEST_FIFO_ACCESS\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FIFO_ACCESS;
+						break;
+					case 0xc3:
+						/* TEST_FORCE_HOST */
+						pr_debug("TEST_FORCE_HOST\n");
+						musb->test_mode_nr =
+							MUSB_TEST_FORCE_HOST;
+						break;
 					default:
 						goto stall;
 					}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index fa55aacc385..244267527a6 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -75,6 +75,10 @@
 /* MUSB ULPI VBUSCONTROL */
 #define MUSB_ULPI_USE_EXTVBUS	0x01
 #define MUSB_ULPI_USE_EXTVBUSIND 0x02
+/* ULPI_REG_CONTROL */
+#define MUSB_ULPI_REG_REQ	(1 << 0)
+#define MUSB_ULPI_REG_CMPLT	(1 << 1)
+#define MUSB_ULPI_RDN_WR	(1 << 2)
 
 /* TESTMODE */
 #define MUSB_TEST_FORCE_HOST	0x80
@@ -251,6 +255,12 @@
 /* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
 #define MUSB_HWVERS		0x6C	/* 8 bit */
 #define MUSB_ULPI_BUSCONTROL	0x70	/* 8 bit */
+#define MUSB_ULPI_INT_MASK	0x72	/* 8 bit */
+#define MUSB_ULPI_INT_SRC	0x73	/* 8 bit */
+#define MUSB_ULPI_REG_DATA	0x74	/* 8 bit */
+#define MUSB_ULPI_REG_ADDR	0x75	/* 8 bit */
+#define MUSB_ULPI_REG_CONTROL	0x76	/* 8 bit */
+#define MUSB_ULPI_RAW_DATA	0x77	/* 8 bit */
 
 #define MUSB_EPINFO		0x78	/* 8 bit */
 #define MUSB_RAMINFO		0x79	/* 8 bit */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 7775e1c0a21..92e85e027cf 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -183,8 +183,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 
 void musb_root_disconnect(struct musb *musb)
 {
-	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
-			| (1 << USB_PORT_FEAT_C_CONNECTION);
+	musb->port1_status = USB_PORT_STAT_POWER
+			| (USB_PORT_STAT_C_CONNECTION << 16);
 
 	usb_hcd_poll_rh_status(musb_to_hcd(musb));
 	musb->is_active = 0;
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index 613f95a058f..f763d62f151 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -102,26 +102,16 @@ static inline void musb_write_hsdma_addr(void __iomem *mbase,
 
 static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
 {
-	u32 count = musb_readw(mbase,
+	return musb_readl(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
-
-	count = count << 16;
-
-	count |= musb_readw(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
-
-	return count;
 }
 
 static inline void musb_write_hsdma_count(void __iomem *mbase,
 				u8 bchannel, u32 len)
 {
-	musb_writew(mbase,
-		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),
-		((u16)((u32) len & 0xFFFF)));
-	musb_writew(mbase,
+	musb_writel(mbase,
 		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
-		((u16)(((u32) len >> 16) & 0xFFFF)));
+		len);
 }
 
 #endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 82592633502..e06d65e36bf 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -32,17 +32,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <plat/mux.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
 
-#ifdef CONFIG_ARCH_OMAP3430
-#define	get_cpu_rev()	2
-#endif
-
 
 static struct timer_list musb_idle_timer;
 
@@ -145,10 +139,6 @@ void musb_platform_enable(struct musb *musb)
 void musb_platform_disable(struct musb *musb)
 {
 }
-static void omap_vbus_power(struct musb *musb, int is_on, int sleeping)
-{
-}
-
 static void omap_set_vbus(struct musb *musb, int is_on)
 {
 	u8		devctl;
@@ -199,9 +189,10 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
 {
 	u32 l;
+	struct omap_musb_board_data *data = board_data;
 
 #if defined(CONFIG_ARCH_OMAP2430)
 	omap_cfg_reg(AE5_2430_USB0HS_STP);
@@ -235,7 +226,15 @@ int __init musb_platform_init(struct musb *musb)
 	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
 
 	l = musb_readl(musb->mregs, OTG_INTERFSEL);
-	l |= ULPI_12PIN;
+
+	if (data->interface_type == MUSB_INTERFACE_UTMI) {
+		/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
+		l &= ~ULPI_12PIN;       /* Disable ULPI */
+		l |= UTMI_8BIT;         /* Enable UTMI  */
+	} else {
+		l |= ULPI_12PIN;
+	}
+
 	musb_writel(musb->mregs, OTG_INTERFSEL, l);
 
 	pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
@@ -246,8 +245,6 @@ int __init musb_platform_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	omap_vbus_power(musb, musb->board_mode == MUSB_HOST, 1);
-
 	if (is_host_enabled(musb))
 		musb->board_set_vbus = omap_set_vbus;
 
@@ -272,7 +269,7 @@ void musb_platform_restore_context(struct musb *musb,
 }
 #endif
 
-int musb_platform_suspend(struct musb *musb)
+static int musb_platform_suspend(struct musb *musb)
 {
 	u32 l;
 
@@ -327,8 +324,6 @@ static int musb_platform_resume(struct musb *musb)
 int musb_platform_exit(struct musb *musb)
 {
 
-	omap_vbus_power(musb, 0 /*off*/, 1);
-
 	musb_platform_suspend(musb);
 
 	return 0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 60d3938cafc..05c077f8f9a 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1104,7 +1104,7 @@ err:
 	return -ENODEV;
 }
 
-int __init musb_platform_init(struct musb *musb)
+int __init musb_platform_init(struct musb *musb, void *board_data)
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 78a20970926..45696949241 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1654,7 +1654,7 @@ static int __init isp_init(void)
 {
 	return i2c_add_driver(&isp1301_driver);
 }
-module_init(isp_init);
+subsys_initcall(isp_init);
 
 static void __exit isp_exit(void)
 {
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 223cdf46ccb..0e8888588d4 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
@@ -41,81 +42,7 @@
 
 /* Register defines */
 
-#define VENDOR_ID_LO			0x00
-#define VENDOR_ID_HI			0x01
-#define PRODUCT_ID_LO			0x02
-#define PRODUCT_ID_HI			0x03
-
-#define FUNC_CTRL			0x04
-#define FUNC_CTRL_SET			0x05
-#define FUNC_CTRL_CLR			0x06
-#define FUNC_CTRL_SUSPENDM		(1 << 6)
-#define FUNC_CTRL_RESET			(1 << 5)
-#define FUNC_CTRL_OPMODE_MASK		(3 << 3) /* bits 3 and 4 */
-#define FUNC_CTRL_OPMODE_NORMAL		(0 << 3)
-#define FUNC_CTRL_OPMODE_NONDRIVING	(1 << 3)
-#define FUNC_CTRL_OPMODE_DISABLE_BIT_NRZI	(2 << 3)
-#define FUNC_CTRL_TERMSELECT		(1 << 2)
-#define FUNC_CTRL_XCVRSELECT_MASK	(3 << 0) /* bits 0 and 1 */
-#define FUNC_CTRL_XCVRSELECT_HS		(0 << 0)
-#define FUNC_CTRL_XCVRSELECT_FS		(1 << 0)
-#define FUNC_CTRL_XCVRSELECT_LS		(2 << 0)
-#define FUNC_CTRL_XCVRSELECT_FS4LS	(3 << 0)
-
-#define IFC_CTRL			0x07
-#define IFC_CTRL_SET			0x08
-#define IFC_CTRL_CLR			0x09
-#define IFC_CTRL_INTERFACE_PROTECT_DISABLE	(1 << 7)
-#define IFC_CTRL_AUTORESUME		(1 << 4)
-#define IFC_CTRL_CLOCKSUSPENDM		(1 << 3)
-#define IFC_CTRL_CARKITMODE		(1 << 2)
-#define IFC_CTRL_FSLSSERIALMODE_3PIN	(1 << 1)
-
-#define TWL4030_OTG_CTRL		0x0A
-#define TWL4030_OTG_CTRL_SET		0x0B
-#define TWL4030_OTG_CTRL_CLR		0x0C
-#define TWL4030_OTG_CTRL_DRVVBUS	(1 << 5)
-#define TWL4030_OTG_CTRL_CHRGVBUS	(1 << 4)
-#define TWL4030_OTG_CTRL_DISCHRGVBUS	(1 << 3)
-#define TWL4030_OTG_CTRL_DMPULLDOWN	(1 << 2)
-#define TWL4030_OTG_CTRL_DPPULLDOWN	(1 << 1)
-#define TWL4030_OTG_CTRL_IDPULLUP	(1 << 0)
-
-#define USB_INT_EN_RISE			0x0D
-#define USB_INT_EN_RISE_SET		0x0E
-#define USB_INT_EN_RISE_CLR		0x0F
-#define USB_INT_EN_FALL			0x10
-#define USB_INT_EN_FALL_SET		0x11
-#define USB_INT_EN_FALL_CLR		0x12
-#define USB_INT_STS			0x13
-#define USB_INT_LATCH			0x14
-#define USB_INT_IDGND			(1 << 4)
-#define USB_INT_SESSEND			(1 << 3)
-#define USB_INT_SESSVALID		(1 << 2)
-#define USB_INT_VBUSVALID		(1 << 1)
-#define USB_INT_HOSTDISCONNECT		(1 << 0)
-
-#define CARKIT_CTRL			0x19
-#define CARKIT_CTRL_SET			0x1A
-#define CARKIT_CTRL_CLR			0x1B
-#define CARKIT_CTRL_MICEN		(1 << 6)
-#define CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
-#define CARKIT_CTRL_SPKLEFTEN		(1 << 4)
-#define CARKIT_CTRL_RXDEN		(1 << 3)
-#define CARKIT_CTRL_TXDEN		(1 << 2)
-#define CARKIT_CTRL_IDGNDDRV		(1 << 1)
-#define CARKIT_CTRL_CARKITPWR		(1 << 0)
-#define CARKIT_PLS_CTRL			0x22
-#define CARKIT_PLS_CTRL_SET		0x23
-#define CARKIT_PLS_CTRL_CLR		0x24
-#define CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
-#define CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
-#define CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
-#define CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
-
 #define MCPC_CTRL			0x30
-#define MCPC_CTRL_SET			0x31
-#define MCPC_CTRL_CLR			0x32
 #define MCPC_CTRL_RTSOL			(1 << 7)
 #define MCPC_CTRL_EXTSWR		(1 << 6)
 #define MCPC_CTRL_EXTSWC		(1 << 5)
@@ -125,8 +52,6 @@
 #define MCPC_CTRL_HS_UART		(1 << 0)
 
 #define MCPC_IO_CTRL			0x33
-#define MCPC_IO_CTRL_SET		0x34
-#define MCPC_IO_CTRL_CLR		0x35
 #define MCPC_IO_CTRL_MICBIASEN		(1 << 5)
 #define MCPC_IO_CTRL_CTS_NPU		(1 << 4)
 #define MCPC_IO_CTRL_RXD_PU		(1 << 3)
@@ -135,19 +60,13 @@
 #define MCPC_IO_CTRL_RTSTYP		(1 << 0)
 
 #define MCPC_CTRL2			0x36
-#define MCPC_CTRL2_SET			0x37
-#define MCPC_CTRL2_CLR			0x38
 #define MCPC_CTRL2_MCPC_CK_EN		(1 << 0)
 
 #define OTHER_FUNC_CTRL			0x80
-#define OTHER_FUNC_CTRL_SET		0x81
-#define OTHER_FUNC_CTRL_CLR		0x82
 #define OTHER_FUNC_CTRL_BDIS_ACON_EN	(1 << 4)
 #define OTHER_FUNC_CTRL_FIVEWIRE_MODE	(1 << 2)
 
 #define OTHER_IFC_CTRL			0x83
-#define OTHER_IFC_CTRL_SET		0x84
-#define OTHER_IFC_CTRL_CLR		0x85
 #define OTHER_IFC_CTRL_OE_INT_EN	(1 << 6)
 #define OTHER_IFC_CTRL_CEA2011_MODE	(1 << 5)
 #define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN	(1 << 4)
@@ -156,11 +75,7 @@
 #define OTHER_IFC_CTRL_ALT_INT_REROUTE	(1 << 0)
 
 #define OTHER_INT_EN_RISE		0x86
-#define OTHER_INT_EN_RISE_SET		0x87
-#define OTHER_INT_EN_RISE_CLR		0x88
 #define OTHER_INT_EN_FALL		0x89
-#define OTHER_INT_EN_FALL_SET		0x8A
-#define OTHER_INT_EN_FALL_CLR		0x8B
 #define OTHER_INT_STS			0x8C
 #define OTHER_INT_LATCH			0x8D
 #define OTHER_INT_VB_SESS_VLD		(1 << 7)
@@ -178,13 +93,9 @@
 #define ID_RES_GND			(1 << 0)
 
 #define POWER_CTRL			0xAC
-#define POWER_CTRL_SET			0xAD
-#define POWER_CTRL_CLR			0xAE
 #define POWER_CTRL_OTG_ENAB		(1 << 5)
 
 #define OTHER_IFC_CTRL2			0xAF
-#define OTHER_IFC_CTRL2_SET		0xB0
-#define OTHER_IFC_CTRL2_CLR		0xB1
 #define OTHER_IFC_CTRL2_ULPI_STP_LOW	(1 << 4)
 #define OTHER_IFC_CTRL2_ULPI_TXEN_POL	(1 << 3)
 #define OTHER_IFC_CTRL2_ULPI_4PIN_2430	(1 << 2)
@@ -193,14 +104,10 @@
 #define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N	(1 << 0)
 
 #define REG_CTRL_EN			0xB2
-#define REG_CTRL_EN_SET			0xB3
-#define REG_CTRL_EN_CLR			0xB4
 #define REG_CTRL_ERROR			0xB5
 #define ULPI_I2C_CONFLICT_INTEN		(1 << 0)
 
 #define OTHER_FUNC_CTRL2		0xB8
-#define OTHER_FUNC_CTRL2_SET		0xB9
-#define OTHER_FUNC_CTRL2_CLR		0xBA
 #define OTHER_FUNC_CTRL2_VBAT_TIMER_EN	(1 << 0)
 
 /* following registers do not have separate _clr and _set registers */
@@ -328,13 +235,13 @@ static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
 static inline int
 twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 {
-	return twl4030_usb_write(twl, reg + 1, bits);
+	return twl4030_usb_write(twl, ULPI_SET(reg), bits);
 }
 
 static inline int
 twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
 {
-	return twl4030_usb_write(twl, reg + 2, bits);
+	return twl4030_usb_write(twl, ULPI_CLR(reg), bits);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -393,11 +300,12 @@ static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
 
 	switch (mode) {
 	case T2_USB_MODE_ULPI:
-		twl4030_usb_clear_bits(twl, IFC_CTRL, IFC_CTRL_CARKITMODE);
+		twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL,
+					ULPI_IFC_CTRL_CARKITMODE);
 		twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
-		twl4030_usb_clear_bits(twl, FUNC_CTRL,
-					FUNC_CTRL_XCVRSELECT_MASK |
-					FUNC_CTRL_OPMODE_MASK);
+		twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL,
+					ULPI_FUNC_CTRL_XCVRSEL_MASK |
+					ULPI_FUNC_CTRL_OPMODE_MASK);
 		break;
 	case -1:
 		/* FIXME: power on defaults */
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 9010225e0d0..b1b34693294 100644
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -29,28 +29,6 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 
-/* ULPI register addresses */
-#define ULPI_VID_LOW         0x00    /* Vendor ID low */
-#define ULPI_VID_HIGH        0x01    /* Vendor ID high */
-#define ULPI_PID_LOW         0x02    /* Product ID low */
-#define ULPI_PID_HIGH        0x03    /* Product ID high */
-#define ULPI_ITFCTL          0x07    /* Interface Control */
-#define ULPI_OTGCTL          0x0A    /* OTG Control */
-
-/* add to above register address to access Set/Clear functions */
-#define ULPI_REG_SET         0x01
-#define ULPI_REG_CLEAR       0x02
-
-/* ULPI OTG Control Register bits */
-#define ID_PULL_UP              (1 << 0)        /* enable ID Pull Up */
-#define DP_PULL_DOWN            (1 << 1)        /* enable DP Pull Down */
-#define DM_PULL_DOWN            (1 << 2)        /* enable DM Pull Down */
-#define DISCHRG_VBUS            (1 << 3)        /* Discharge Vbus */
-#define CHRG_VBUS               (1 << 4)        /* Charge Vbus */
-#define DRV_VBUS                (1 << 5)        /* Drive Vbus */
-#define DRV_VBUS_EXT            (1 << 6)        /* Drive Vbus external */
-#define USE_EXT_VBUS_IND        (1 << 7)        /* Use ext. Vbus indicator */
-
 #define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
 
 #define TR_FLAG(flags, a, b)	(((flags) & a) ? b : 0)
@@ -65,28 +43,28 @@ static int ulpi_set_flags(struct otg_transceiver *otg)
 	unsigned int flags = 0;
 
 	if (otg->flags & USB_OTG_PULLUP_ID)
-		flags |= ID_PULL_UP;
+		flags |= ULPI_OTG_CTRL_ID_PULLUP;
 
 	if (otg->flags & USB_OTG_PULLDOWN_DM)
-		flags |= DM_PULL_DOWN;
+		flags |= ULPI_OTG_CTRL_DM_PULLDOWN;
 
 	if (otg->flags & USB_OTG_PULLDOWN_DP)
-		flags |= DP_PULL_DOWN;
+		flags |= ULPI_OTG_CTRL_DP_PULLDOWN;
 
 	if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR)
-		flags |= USE_EXT_VBUS_IND;
+		flags |= ULPI_OTG_CTRL_EXTVBUSIND;
 
-	return otg_io_write(otg, flags, ULPI_OTGCTL + ULPI_REG_SET);
+	return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
 }
 
 static int ulpi_init(struct otg_transceiver *otg)
 {
 	int i, vid, pid;
 
-	vid = (otg_io_read(otg, ULPI_VID_HIGH) << 8) |
-	       otg_io_read(otg, ULPI_VID_LOW);
-	pid = (otg_io_read(otg, ULPI_PID_HIGH) << 8) |
-	       otg_io_read(otg, ULPI_PID_LOW);
+	vid = (otg_io_read(otg, ULPI_VENDOR_ID_HIGH) << 8) |
+	       otg_io_read(otg, ULPI_VENDOR_ID_LOW);
+	pid = (otg_io_read(otg, ULPI_PRODUCT_ID_HIGH) << 8) |
+	       otg_io_read(otg, ULPI_PRODUCT_ID_LOW);
 
 	pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
 
@@ -100,19 +78,19 @@ static int ulpi_init(struct otg_transceiver *otg)
 
 static int ulpi_set_vbus(struct otg_transceiver *otg, bool on)
 {
-	unsigned int flags = otg_io_read(otg, ULPI_OTGCTL);
+	unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL);
 
-	flags &= ~(DRV_VBUS | DRV_VBUS_EXT);
+	flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
 
 	if (on) {
 		if (otg->flags & USB_OTG_DRV_VBUS)
-			flags |= DRV_VBUS;
+			flags |= ULPI_OTG_CTRL_DRVVBUS;
 
 		if (otg->flags & USB_OTG_DRV_VBUS_EXT)
-			flags |= DRV_VBUS_EXT;
+			flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
 	}
 
-	return otg_io_write(otg, flags, ULPI_OTGCTL + ULPI_REG_SET);
+	return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL));
 }
 
 struct otg_transceiver *
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index a0ecb42cb33..bd8aab0ef1c 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -425,6 +425,16 @@ config USB_SERIAL_MOS7720
 	  To compile this driver as a module, choose M here: the
 	  module will be called mos7720.
 
+config USB_SERIAL_MOS7715_PARPORT
+	bool "Support for parallel port on the Moschip 7715"
+	depends on USB_SERIAL_MOS7720
+	depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
+	select PARPORT_NOT_PC
+	---help---
+	Say Y if you have a Moschip 7715 device and would like to use
+	the parallel port it provides.  The port will register with
+	the parport subsystem as a low-level driver.
+
 config USB_SERIAL_MOS7840
 	tristate "USB Moschip 7840/7820 USB Serial Driver"
 	---help---
@@ -485,6 +495,7 @@ config USB_SERIAL_QCAUX
 
 config USB_SERIAL_QUALCOMM
 	tristate "USB Qualcomm Serial modem"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you have a Qualcomm USB modem device.  These are
 	  usually wireless cellular modems.
@@ -576,8 +587,12 @@ config USB_SERIAL_XIRCOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.
 
+config USB_SERIAL_WWAN
+	tristate
+
 config USB_SERIAL_OPTION
 	tristate "USB driver for GSM and CDMA modems"
+	select USB_SERIAL_WWAN
 	help
 	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
 
@@ -619,6 +634,14 @@ config USB_SERIAL_VIVOPAY_SERIAL
           To compile this driver as a module, choose M here: the
           module will be called vivopay-serial.
 
+config USB_SERIAL_ZIO
+	tristate "ZIO Motherboard USB serial interface driver"
+	help
+	  Say Y here if you want to use ZIO Motherboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zio.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 83c9e431a56..e54c728c016 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -52,9 +52,11 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)	+= vivopay-serial.o
+obj-$(CONFIG_USB_SERIAL_ZIO)			+= zio.o
 
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 4fd7af98b1a..0db6ace16f7 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -1,7 +1,9 @@
 /*
  * AIRcable USB Bluetooth Dongle Driver.
  *
+ * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
+ *
  * This program is free software; you can redistribute it and/or modify it under
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
@@ -42,10 +44,10 @@
  *
  */
 
+#include <asm/unaligned.h>
 #include <linux/tty.h>
 #include <linux/slab.h>
 #include <linux/tty_flip.h>
-#include <linux/circ_buf.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -55,16 +57,12 @@ static int debug;
 #define AIRCABLE_VID		0x16CA
 #define AIRCABLE_USB_PID	0x1502
 
-/* write buffer size defines */
-#define AIRCABLE_BUF_SIZE	2048
-
 /* Protocol Stuff */
 #define HCI_HEADER_LENGTH	0x4
 #define TX_HEADER_0		0x20
 #define TX_HEADER_1		0x29
 #define RX_HEADER_0		0x00
 #define RX_HEADER_1		0x20
-#define MAX_HCI_FRAMESIZE	60
 #define HCI_COMPLETE_FRAME	64
 
 /* rx_flags */
@@ -74,8 +72,8 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.0b2"
-#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>"
+#define DRIVER_VERSION "v2.0"
+#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "AIRcable USB Driver"
 
 /* ID table that will be registered with USB core */
@@ -85,226 +83,21 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-
-/* Internal Structure */
-struct aircable_private {
-	spinlock_t rx_lock;		/* spinlock for the receive lines */
-	struct circ_buf *tx_buf;	/* write buffer */
-	struct circ_buf *rx_buf;	/* read buffer */
-	int rx_flags;			/* for throttilng */
-	struct work_struct rx_work;	/* work cue for the receiving line */
-	struct usb_serial_port *port;	/* USB port with which associated */
-};
-
-/* Private methods */
-
-/* Circular Buffer Methods, code from ti_usb_3410_5052 used */
-/*
- * serial_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void serial_buf_clear(struct circ_buf *cb)
-{
-	cb->head = cb->tail = 0;
-}
-
-/*
- * serial_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct circ_buf *serial_buf_alloc(void)
-{
-	struct circ_buf *cb;
-	cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
-	if (cb == NULL)
-		return NULL;
-	cb->buf = kmalloc(AIRCABLE_BUF_SIZE, GFP_KERNEL);
-	if (cb->buf == NULL) {
-		kfree(cb);
-		return NULL;
-	}
-	serial_buf_clear(cb);
-	return cb;
-}
-
-/*
- * serial_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void serial_buf_free(struct circ_buf *cb)
-{
-	kfree(cb->buf);
-	kfree(cb);
-}
-
-/*
- * serial_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static int serial_buf_data_avail(struct circ_buf *cb)
-{
-	return CIRC_CNT(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
-}
-
-/*
- * serial_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static int serial_buf_put(struct circ_buf *cb, const char *buf, int count)
-{
-	int c, ret = 0;
-	while (1) {
-		c = CIRC_SPACE_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(cb->buf + cb->head, buf, c);
-		cb->head = (cb->head + c) & (AIRCABLE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret = c;
-	}
-	return ret;
-}
-
-/*
- * serial_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static int serial_buf_get(struct circ_buf *cb, char *buf, int count)
-{
-	int c, ret = 0;
-	while (1) {
-		c = CIRC_CNT_TO_END(cb->head, cb->tail, AIRCABLE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(buf, cb->buf + cb->tail, c);
-		cb->tail = (cb->tail + c) & (AIRCABLE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret = c;
-	}
-	return ret;
-}
-
-/* End of circula buffer methods */
-
-static void aircable_send(struct usb_serial_port *port)
+static int aircable_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	int count, result;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	unsigned char *buf;
-	__le16 *dbuf;
-	dbg("%s - port %d", __func__, port->number);
-	if (port->write_urb_busy)
-		return;
-
-	count = min(serial_buf_data_avail(priv->tx_buf), MAX_HCI_FRAMESIZE);
-	if (count == 0)
-		return;
-
-	buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
-	if (!buf) {
-		dev_err(&port->dev, "%s- kzalloc(%d) failed.\n",
-			__func__, count + HCI_HEADER_LENGTH);
-		return;
-	}
+	int count;
+	unsigned char *buf = dest;
 
+	count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH,
+					size - HCI_HEADER_LENGTH, &port->lock);
 	buf[0] = TX_HEADER_0;
 	buf[1] = TX_HEADER_1;
-	dbuf = (__le16 *)&buf[2];
-	*dbuf = cpu_to_le16((u16)count);
-	serial_buf_get(priv->tx_buf, buf + HCI_HEADER_LENGTH,
-							MAX_HCI_FRAMESIZE);
-
-	memcpy(port->write_urb->transfer_buffer, buf,
-	       count + HCI_HEADER_LENGTH);
-
-	kfree(buf);
-	port->write_urb_busy = 1;
-	usb_serial_debug_data(debug, &port->dev, __func__,
-			      count + HCI_HEADER_LENGTH,
-			      port->write_urb->transfer_buffer);
-	port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH;
-	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, result);
-		port->write_urb_busy = 0;
-	}
+	put_unaligned_le16(count, &buf[2]);
 
-	schedule_work(&port->work);
+	return count + HCI_HEADER_LENGTH;
 }
 
-static void aircable_read(struct work_struct *work)
-{
-	struct aircable_private *priv =
-		container_of(work, struct aircable_private, rx_work);
-	struct usb_serial_port *port = priv->port;
-	struct tty_struct *tty;
-	unsigned char *data;
-	int count;
-	if (priv->rx_flags & THROTTLED) {
-		if (priv->rx_flags & ACTUALLY_THROTTLED)
-			schedule_work(&priv->rx_work);
-		return;
-	}
-
-	/* By now I will flush data to the tty in packages of no more than
-	 * 64 bytes, to ensure I do not get throttled.
-	 * Ask USB mailing list for better aproach.
-	 */
-	tty = tty_port_tty_get(&port->port);
-
-	if (!tty) {
-		schedule_work(&priv->rx_work);
-		dev_err(&port->dev, "%s - No tty available\n", __func__);
-		return ;
-	}
-
-	count = min(64, serial_buf_data_avail(priv->rx_buf));
-
-	if (count <= 0)
-		goto out; /* We have finished sending everything. */
-
-	tty_prepare_flip_string(tty, &data, count);
-	if (!data) {
-		dev_err(&port->dev, "%s- kzalloc(%d) failed.",
-							__func__, count);
-		goto out;
-	}
-
-	serial_buf_get(priv->rx_buf, data, count);
-
-	tty_flip_buffer_push(tty);
-
-	if (serial_buf_data_avail(priv->rx_buf))
-		schedule_work(&priv->rx_work);
-out:		
-	tty_kref_put(tty);
-	return;
-}
-/* End of private methods */
-
 static int aircable_probe(struct usb_serial *serial,
 			  const struct usb_device_id *id)
 {
@@ -330,247 +123,50 @@ static int aircable_probe(struct usb_serial *serial,
 	return 0;
 }
 
-static int aircable_attach(struct usb_serial *serial)
-{
-	struct usb_serial_port *port = serial->port[0];
-	struct aircable_private *priv;
-
-	priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
-	if (!priv) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
-			sizeof(struct aircable_private));
-		return -ENOMEM;
-	}
-
-	/* Allocation of Circular Buffers */
-	priv->tx_buf = serial_buf_alloc();
-	if (priv->tx_buf == NULL) {
-		kfree(priv);
-		return -ENOMEM;
-	}
-
-	priv->rx_buf = serial_buf_alloc();
-	if (priv->rx_buf == NULL) {
-		kfree(priv->tx_buf);
-		kfree(priv);
-		return -ENOMEM;
-	}
-
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	priv->port = port;
-	INIT_WORK(&priv->rx_work, aircable_read);
-
-	usb_set_serial_port_data(serial->port[0], priv);
-
-	return 0;
-}
-
-static void aircable_release(struct usb_serial *serial)
+static int aircable_process_packet(struct tty_struct *tty,
+			struct usb_serial_port *port, int has_headers,
+			char *packet, int len)
 {
-
-	struct usb_serial_port *port = serial->port[0];
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-
-	dbg("%s", __func__);
-
-	if (priv) {
-		serial_buf_free(priv->tx_buf);
-		serial_buf_free(priv->rx_buf);
-		kfree(priv);
+	if (has_headers) {
+		len -= HCI_HEADER_LENGTH;
+		packet += HCI_HEADER_LENGTH;
 	}
-}
-
-static int aircable_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	return serial_buf_data_avail(priv->tx_buf);
-}
-
-static int aircable_write(struct tty_struct *tty, struct usb_serial_port *port,
-			  const unsigned char *source, int count)
-{
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	int temp;
-
-	dbg("%s - port %d, %d bytes", __func__, port->number, count);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count, source);
-
-	if (!count) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return count;
+	if (len <= 0) {
+		dbg("%s - malformed packet", __func__);
+		return 0;
 	}
 
-	temp = serial_buf_put(priv->tx_buf, source, count);
-
-	aircable_send(port);
-
-	if (count > AIRCABLE_BUF_SIZE)
-		count = AIRCABLE_BUF_SIZE;
-
-	return count;
+	tty_insert_flip_string(tty, packet, len);
 
+	return len;
 }
 
-static void aircable_write_bulk_callback(struct urb *urb)
+static void aircable_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-	int result;
-
-	dbg("%s - urb status: %d", __func__ , status);
-
-	/* This has been taken from cypress_m8.c cypress_write_int_callback */
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
-		port->write_urb_busy = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __func__);
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev,
-			    "%s - failed resubmitting write urb, error %d\n",
-							__func__, result);
-		else
-			return;
-	}
-
-	port->write_urb_busy = 0;
-
-	aircable_send(port);
-}
-
-static void aircable_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
 	struct tty_struct *tty;
-	unsigned long no_packages, remaining, package_length, i;
-	int result, shift = 0;
-	unsigned char *temp;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - urb status = %d", __func__, status);
-		if (status == -EPROTO) {
-			dbg("%s - caught -EPROTO, resubmitting the urb",
-			    __func__);
-			usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-				usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-				port->read_urb->transfer_buffer,
-				port->read_urb->transfer_buffer_length,
-				aircable_read_bulk_callback, port);
-
-			result = usb_submit_urb(urb, GFP_ATOMIC);
-			if (result)
-				dev_err(&urb->dev->dev,
-					"%s - failed resubmitting read urb, error %d\n",
-					__func__, result);
-			return;
-		}
-		dbg("%s - unable to handle the error, exiting.", __func__);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-				urb->actual_length, urb->transfer_buffer);
+	int has_headers;
+	int count;
+	int len;
+	int i;
 
 	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		if (urb->actual_length <= 2) {
-			/* This is an incomplete package */
-			serial_buf_put(priv->rx_buf, urb->transfer_buffer,
-				       urb->actual_length);
-		} else {
-			temp = urb->transfer_buffer;
-			if (temp[0] == RX_HEADER_0)
-				shift = HCI_HEADER_LENGTH;
-
-			remaining = urb->actual_length;
-			no_packages = urb->actual_length / (HCI_COMPLETE_FRAME);
-
-			if (urb->actual_length % HCI_COMPLETE_FRAME != 0)
-				no_packages++;
+	if (!tty)
+		return;
 
-			for (i = 0; i < no_packages; i++) {
-				if (remaining > (HCI_COMPLETE_FRAME))
-					package_length = HCI_COMPLETE_FRAME;
-				else
-					package_length = remaining;
-				remaining -= package_length;
+	has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);
 
-				serial_buf_put(priv->rx_buf,
-					urb->transfer_buffer + shift +
-					(HCI_COMPLETE_FRAME) * (i),
-					package_length - shift);
-			}
-		}
-		aircable_read(&priv->rx_work);
+	count = 0;
+	for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) {
+		len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME);
+		count += aircable_process_packet(tty, port, has_headers,
+								&data[i], len);
 	}
-	tty_kref_put(tty);
-
-	/* Schedule the next read */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-				  port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  aircable_read_bulk_callback, port);
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result && result != -EPERM)
-		dev_err(&urb->dev->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-}
-
-/* Based on ftdi_sio.c throttle */
-static void aircable_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
 
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&priv->rx_lock);
-	priv->rx_flags |= THROTTLED;
-	spin_unlock_irq(&priv->rx_lock);
-}
-
-/* Based on ftdi_sio.c unthrottle */
-static void aircable_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct aircable_private *priv = usb_get_serial_port_data(port);
-	int actually_throttled;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irq(&priv->rx_lock);
-	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irq(&priv->rx_lock);
-
-	if (actually_throttled)
-		schedule_work(&priv->rx_work);
+	if (count)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 static struct usb_driver aircable_driver = {
@@ -589,15 +185,12 @@ static struct usb_serial_driver aircable_device = {
 	.usb_driver = 		&aircable_driver,
 	.id_table = 		id_table,
 	.num_ports =		1,
-	.attach =		aircable_attach,
+	.bulk_out_size =	HCI_COMPLETE_FRAME,
 	.probe =		aircable_probe,
-	.release =		aircable_release,
-	.write =		aircable_write,
-	.write_room =		aircable_write_room,
-	.write_bulk_callback =	aircable_write_bulk_callback,
-	.read_bulk_callback =	aircable_read_bulk_callback,
-	.throttle =		aircable_throttle,
-	.unthrottle =		aircable_unthrottle,
+	.process_read_urb =	aircable_process_read_urb,
+	.prepare_write_buffer =	aircable_prepare_write_buffer,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 };
 
 static int __init aircable_init(void)
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 9b66bf19f75..4e41a2a3942 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@ static int debug;
  * Version information
  */
 
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v0.6"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -355,14 +355,11 @@ static void ark3116_close(struct usb_serial_port *port)
 		/* deactivate interrupts */
 		ark3116_write_reg(serial, UART_IER, 0);
 
-		/* shutdown any bulk reads that might be going on */
-		if (serial->num_bulk_out)
-			usb_kill_urb(port->write_urb);
-		if (serial->num_bulk_in)
-			usb_kill_urb(port->read_urb);
+		usb_serial_generic_close(port);
 		if (serial->num_interrupt_in)
 			usb_kill_urb(port->interrupt_in_urb);
 	}
+
 }
 
 static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -675,87 +672,45 @@ static void ark3116_read_int_callback(struct urb *urb)
  * error for the next block of data as well...
  * For now, let's pretend this can't happen.
  */
-
-static void send_to_tty(struct tty_struct *tty,
-			const unsigned char *chars,
-			size_t size, char flag)
+static void ark3116_process_read_urb(struct urb *urb)
 {
-	if (size == 0)
-		return;
-	if (flag == TTY_NORMAL) {
-		tty_insert_flip_string(tty, chars, size);
-	} else {
-		int i;
-		for (i = 0; i < size; ++i)
-			tty_insert_flip_char(tty, chars[i], flag);
-	}
-}
-
-static void ark3116_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port =  urb->context;
+	struct usb_serial_port *port = urb->context;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	const __u8 *data = urb->transfer_buffer;
-	int status = urb->status;
 	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
 	unsigned long flags;
-	int result;
-	char flag;
 	__u32 lsr;
 
-	switch (status) {
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __func__, status);
+	/* update line status */
+	spin_lock_irqsave(&priv->status_lock, flags);
+	lsr = priv->lsr;
+	priv->lsr &= ~UART_LSR_BRK_ERROR_BITS;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (!urb->actual_length)
 		return;
-	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __func__, status);
-		break;
-	case 0: /* success */
 
-		spin_lock_irqsave(&priv->status_lock, flags);
-		lsr = priv->lsr;
-		/* clear error bits */
-		priv->lsr &= ~UART_LSR_BRK_ERROR_BITS;
-		spin_unlock_irqrestore(&priv->status_lock, flags);
-
-		if (unlikely(lsr & UART_LSR_BI))
-			flag = TTY_BREAK;
-		else if (unlikely(lsr & UART_LSR_PE))
-			flag = TTY_PARITY;
-		else if (unlikely(lsr & UART_LSR_FE))
-			flag = TTY_FRAME;
-		else
-			flag = TTY_NORMAL;
-
-		tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			/* overrun is special, not associated with a char */
-			if (unlikely(lsr & UART_LSR_OE))
-				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-			send_to_tty(tty, data, urb->actual_length, flag);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	if (lsr & UART_LSR_BRK_ERROR_BITS) {
+		if (lsr & UART_LSR_BI)
+			tty_flag = TTY_BREAK;
+		else if (lsr & UART_LSR_PE)
+			tty_flag = TTY_PARITY;
+		else if (lsr & UART_LSR_FE)
+			tty_flag = TTY_FRAME;
 
-		/* Throttle the device if requested by tty */
-		spin_lock_irqsave(&port->lock, flags);
-		port->throttled = port->throttle_req;
-		if (port->throttled) {
-			spin_unlock_irqrestore(&port->lock, flags);
-			return;
-		} else
-			spin_unlock_irqrestore(&port->lock, flags);
+		/* overrun is special, not associated with a char */
+		if (lsr & UART_LSR_OE)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
-	/* Continue reading from device */
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&urb->dev->dev, "%s - failed resubmitting"
-			" read urb, error %d\n", __func__, result);
+	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 static struct usb_driver ark3116_driver = {
@@ -785,7 +740,7 @@ static struct usb_serial_driver ark3116_device = {
 	.close =		ark3116_close,
 	.break_ctl = 		ark3116_break_ctl,
 	.read_int_callback = 	ark3116_read_int_callback,
-	.read_bulk_callback =	ark3116_read_bulk_callback,
+	.process_read_urb =	ark3116_process_read_urb,
 };
 
 static int __init ark3116_init(void)
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 1295e44e3f1..36df35295db 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2000		William Greathouse (wgreathouse@smva.com)
  *  Copyright (C) 2000-2001 	Greg Kroah-Hartman (greg@kroah.com)
+ *  Copyright (C) 2010		Johan Hovold (jhovold@gmail.com)
  *
  *  This program is largely derived from work by the linux-usb group
  *  and associated source files.  Please see the usb/serial files for
@@ -84,7 +85,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.2"
+#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
@@ -95,6 +96,7 @@ static int  belkin_sa_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
+static void belkin_sa_process_read_urb(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios * old);
 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
@@ -112,7 +114,6 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
 	{ }	/* Terminating entry */
 };
-
 MODULE_DEVICE_TABLE(usb, id_table_combined);
 
 static struct usb_driver belkin_driver = {
@@ -120,7 +121,7 @@ static struct usb_driver belkin_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table_combined,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 /* All of the device info needed for the serial converters */
@@ -136,7 +137,7 @@ static struct usb_serial_driver belkin_device = {
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,
 	.read_int_callback =	belkin_sa_read_int_callback,
-					/* How we get the status info */
+	.process_read_urb =	belkin_sa_process_read_urb,
 	.set_termios =		belkin_sa_set_termios,
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
@@ -145,7 +146,6 @@ static struct usb_serial_driver belkin_device = {
 	.release =		belkin_sa_release,
 };
 
-
 struct belkin_sa_private {
 	spinlock_t		lock;
 	unsigned long		control_state;
@@ -196,62 +196,43 @@ static int belkin_sa_startup(struct usb_serial *serial)
 	return 0;
 }
 
-
 static void belkin_sa_release(struct usb_serial *serial)
 {
-	struct belkin_sa_private *priv;
 	int i;
 
 	dbg("%s", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		/* My special items, the standard routines free my urbs */
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
-
-static int  belkin_sa_open(struct tty_struct *tty,
+static int belkin_sa_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
 {
-	int retval = 0;
+	int retval;
 
 	dbg("%s port %d", __func__, port->number);
 
-	/*Start reading from the device*/
-	/* TODO: Look at possibility of submitting multiple URBs to device to
-	 *       enhance buffering.  Win trace shows 16 initial read URBs.
-	 */
-	port->read_urb->dev = port->serial->dev;
-	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (retval) {
-		dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
-		goto exit;
-	}
-
-	port->interrupt_in_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
-		usb_kill_urb(port->read_urb);
 		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
+		return retval;
 	}
 
-exit:
-	return retval;
-} /* belkin_sa_open */
+	retval = usb_serial_generic_open(tty, port);
+	if (retval)
+		usb_kill_urb(port->interrupt_in_urb);
 
+	return retval;
+}
 
 static void belkin_sa_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 
-	/* shutdown our bulk reads and writes */
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
-} /* belkin_sa_close */
-
+}
 
 static void belkin_sa_read_int_callback(struct urb *urb)
 {
@@ -310,31 +291,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	else
 		priv->control_state &= ~TIOCM_CD;
 
-	/* Now to report any errors */
 	priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
-#if 0
-	/*
-	 * fill in the flip buffer here, but I do not know the relation
-	 * to the current/next receive buffer or characters.  I need
-	 * to look in to this before committing any code.
-	 */
-	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
-		tty = tty_port_tty_get(&port->port);
-		/* Overrun Error */
-		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
-		}
-		/* Parity Error */
-		if (priv->last_lsr & BELKIN_SA_LSR_PE) {
-		}
-		/* Framing Error */
-		if (priv->last_lsr & BELKIN_SA_LSR_FE) {
-		}
-		/* Break Indicator */
-		if (priv->last_lsr & BELKIN_SA_LSR_BI) {
-		}
-		tty_kref_put(tty);
-	}
-#endif
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -343,6 +300,53 @@ exit:
 			"result %d\n", __func__, retval);
 }
 
+static void belkin_sa_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned long flags;
+	unsigned char status;
+	char tty_flag;
+
+	/* Update line status */
+	tty_flag = TTY_NORMAL;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	status = priv->last_lsr;
+	priv->last_lsr &= ~BELKIN_SA_LSR_ERR;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	if (status & BELKIN_SA_LSR_ERR) {
+		/* Break takes precedence over parity, which takes precedence
+		 * over framing errors. */
+		if (status & BELKIN_SA_LSR_BI)
+			tty_flag = TTY_BREAK;
+		else if (status & BELKIN_SA_LSR_PE)
+			tty_flag = TTY_PARITY;
+		else if (status & BELKIN_SA_LSR_FE)
+			tty_flag = TTY_FRAME;
+		dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
+
+		/* Overrun is special, not associated with a char. */
+		if (status & BELKIN_SA_LSR_OE)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+
+	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
 static void belkin_sa_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -482,8 +486,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->control_state = control_state;
 	spin_unlock_irqrestore(&priv->lock, flags);
-} /* belkin_sa_set_termios */
-
+}
 
 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 {
@@ -494,7 +497,6 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
 }
 
-
 static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -511,7 +513,6 @@ static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 	return control_state;
 }
 
-
 static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
@@ -583,7 +584,6 @@ failed_usb_serial_register:
 	return retval;
 }
 
-
 static void __exit belkin_sa_exit (void)
 {
 	usb_deregister(&belkin_driver);
diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h
index c66a6730d38..c74b58ab56f 100644
--- a/drivers/usb/serial/belkin_sa.h
+++ b/drivers/usb/serial/belkin_sa.h
@@ -8,10 +8,10 @@
  *  and associated source files.  Please see the usb/serial files for
  *  individual credits and copyrights.
  *
- * 	This program is free software; you can redistribute it and/or modify
- * 	it under the terms of the GNU General Public License as published by
- * 	the Free Software Foundation; either version 2 of the License, or
- * 	(at your option) any later version.
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
@@ -66,7 +66,7 @@
 #ifdef WHEN_I_LEARN_THIS
 #define BELKIN_SA_SET_MAGIC_REQUEST	17 /* I don't know, possibly flush */
 					   /* (always in Wininit sequence before flow control) */
-#define BELKIN_SA_RESET 		xx /* Reset the port */
+#define BELKIN_SA_RESET			xx /* Reset the port */
 #define BELKIN_SA_GET_MODEM_STATUS	xx /* Force return of modem status register */
 #endif
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 7e8e3981841..63f7cc45bca 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -305,10 +305,7 @@ static void ch341_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index f347da2ef00..1ee6b2ab0f8 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -66,7 +66,7 @@ static int usb_console_setup(struct console *co, char *options)
 	struct usb_serial_port *port;
 	int retval;
 	struct tty_struct *tty = NULL;
-	struct ktermios *termios = NULL, dummy;
+	struct ktermios dummy;
 
 	dbg("%s", __func__);
 
@@ -141,15 +141,14 @@ static int usb_console_setup(struct console *co, char *options)
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
-			termios = kzalloc(sizeof(*termios), GFP_KERNEL);
-			if (!termios) {
+			tty_port_tty_set(&port->port, tty);
+			tty->driver = usb_serial_tty_driver;
+			tty->index = co->index;
+			if (tty_init_termios(tty)) {
 				retval = -ENOMEM;
 				err("no more memory");
 				goto free_tty;
 			}
-			memset(&dummy, 0, sizeof(struct ktermios));
-			tty->termios = termios;
-			tty_port_tty_set(&port->port, tty);
 		}
 
 		/* only call the device specific open if this
@@ -161,16 +160,16 @@ static int usb_console_setup(struct console *co, char *options)
 
 		if (retval) {
 			err("could not open USB console port");
-			goto free_termios;
+			goto fail;
 		}
 
 		if (serial->type->set_termios) {
-			termios->c_cflag = cflag;
-			tty_termios_encode_baud_rate(termios, baud, baud);
+			tty->termios->c_cflag = cflag;
+			tty_termios_encode_baud_rate(tty->termios, baud, baud);
+			memset(&dummy, 0, sizeof(struct ktermios));
 			serial->type->set_termios(tty, port, &dummy);
 
 			tty_port_tty_set(&port->port, NULL);
-			kfree(termios);
 			kfree(tty);
 		}
 		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
@@ -180,14 +179,12 @@ static int usb_console_setup(struct console *co, char *options)
 	--port->port.count;
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
-	port->console = 1;
 	port->port.console = 1;
 
 	mutex_unlock(&serial->disc_mutex);
 	return retval;
 
- free_termios:
-	kfree(termios);
+ fail:
 	tty_port_tty_set(&port->port, NULL);
  free_tty:
 	kfree(tty);
@@ -217,7 +214,7 @@ static void usb_console_write(struct console *co,
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	if (!port->console) {
+	if (!port->port.console) {
 		dbg("%s - port not opened", __func__);
 		return;
 	}
@@ -313,7 +310,7 @@ void usb_serial_console_exit(void)
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-		usbcons_info.port->console = 0;
+		usbcons_info.port->port.console = 0;
 		usbcons_info.port = NULL;
 	}
 }
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ec9b0449ccf..8b8c7976b4c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -34,7 +34,6 @@
  * Function Prototypes
  */
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
-static void cp210x_cleanup(struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
 static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
@@ -49,7 +48,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *,
 		unsigned int, unsigned int);
 static void cp210x_break_ctl(struct tty_struct *, int);
 static int cp210x_startup(struct usb_serial *);
-static void cp210x_disconnect(struct usb_serial *);
 static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
 static int cp210x_carrier_raised(struct usb_serial_port *p);
 
@@ -61,6 +59,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
+	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
 	{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
 	{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
@@ -72,9 +72,12 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
 	{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
 	{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+	{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
+	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
 	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
@@ -82,12 +85,15 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+	{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
 	{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
 	{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
@@ -105,6 +111,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
 	{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
 	{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
@@ -115,6 +122,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
@@ -138,6 +147,8 @@ static struct usb_serial_driver cp210x_device = {
 	.usb_driver		= &cp210x_driver,
 	.id_table		= id_table,
 	.num_ports		= 1,
+	.bulk_in_size		= 256,
+	.bulk_out_size		= 256,
 	.open			= cp210x_open,
 	.close			= cp210x_close,
 	.break_ctl		= cp210x_break_ctl,
@@ -145,7 +156,6 @@ static struct usb_serial_driver cp210x_device = {
 	.tiocmget 		= cp210x_tiocmget,
 	.tiocmset		= cp210x_tiocmset,
 	.attach			= cp210x_startup,
-	.disconnect		= cp210x_disconnect,
 	.dtr_rts		= cp210x_dtr_rts,
 	.carrier_raised		= cp210x_carrier_raised
 };
@@ -370,7 +380,6 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -381,49 +390,20 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return -EPROTO;
 	}
 
-	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			usb_rcvbulkpipe(serial->dev,
-			port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			serial->type->read_bulk_callback,
-			port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev, "%s - failed resubmitting read urb, "
-				"error %d\n", __func__, result);
+	result = usb_serial_generic_open(tty, port);
+	if (result)
 		return result;
-	}
 
 	/* Configure the termios structure */
 	cp210x_get_termios(tty, port);
 	return 0;
 }
 
-static void cp210x_cleanup(struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (serial->dev) {
-		/* shutdown any bulk reads that might be going on */
-		if (serial->num_bulk_out)
-			usb_kill_urb(port->write_urb);
-		if (serial->num_bulk_in)
-			usb_kill_urb(port->read_urb);
-	}
-}
-
 static void cp210x_close(struct usb_serial_port *port)
 {
 	dbg("%s - port %d", __func__, port->number);
 
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected)
@@ -807,17 +787,6 @@ static int cp210x_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static void cp210x_disconnect(struct usb_serial *serial)
-{
-	int i;
-
-	dbg("%s", __func__);
-
-	/* Stop reads and writes on all ports */
-	for (i = 0; i < serial->num_ports; ++i)
-		cp210x_cleanup(serial->port[i]);
-}
-
 static int __init cp210x_init(void)
 {
 	int retval;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e23c77925e7..f5d06746cc3 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -64,6 +64,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
+#include <linux/kfifo.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 #include <asm/unaligned.h>
@@ -79,13 +80,12 @@ static int unstable_bauds;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.09"
+#define DRIVER_VERSION "v1.10"
 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
 #define DRIVER_DESC "Cypress USB to Serial Driver"
 
 /* write buffer size defines */
 #define CYPRESS_BUF_SIZE	1024
-#define CYPRESS_CLOSING_WAIT	(30*HZ)
 
 static const struct usb_device_id id_table_earthmate[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
@@ -135,7 +135,7 @@ struct cypress_private {
 	int bytes_out;			   /* used for statistics */
 	int cmd_count;			   /* used for statistics */
 	int cmd_ctrl;			   /* always set this to 1 before issuing a command */
-	struct cypress_buf *buf;	   /* write buffer */
+	struct kfifo write_fifo;	   /* write fifo */
 	int write_urb_in_use;		   /* write urb in use indicator */
 	int write_urb_interval;            /* interval to use for write urb */
 	int read_urb_interval;             /* interval to use for read urb */
@@ -157,14 +157,6 @@ struct cypress_private {
 	struct ktermios tmp_termios; 	   /* stores the old termios settings */
 };
 
-/* write buffer structure */
-struct cypress_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 /* function prototypes for the Cypress USB to serial device */
 static int  cypress_earthmate_startup(struct usb_serial *serial);
 static int  cypress_hidcom_startup(struct usb_serial *serial);
@@ -190,17 +182,6 @@ static void cypress_unthrottle(struct tty_struct *tty);
 static void cypress_set_dead(struct usb_serial_port *port);
 static void cypress_read_int_callback(struct urb *urb);
 static void cypress_write_int_callback(struct urb *urb);
-/* write buffer functions */
-static struct cypress_buf *cypress_buf_alloc(unsigned int size);
-static void cypress_buf_free(struct cypress_buf *cb);
-static void cypress_buf_clear(struct cypress_buf *cb);
-static unsigned int cypress_buf_data_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_space_avail(struct cypress_buf *cb);
-static unsigned int cypress_buf_put(struct cypress_buf *cb,
-					const char *buf, unsigned int count);
-static unsigned int cypress_buf_get(struct cypress_buf *cb,
-					char *buf, unsigned int count);
-
 
 static struct usb_serial_driver cypress_earthmate_device = {
 	.driver = {
@@ -503,8 +484,7 @@ static int generic_startup(struct usb_serial *serial)
 
 	priv->comm_is_ok = !0;
 	spin_lock_init(&priv->lock);
-	priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
-	if (priv->buf == NULL) {
+	if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
 		kfree(priv);
 		return -ENOMEM;
 	}
@@ -627,7 +607,7 @@ static void cypress_release(struct usb_serial *serial)
 	priv = usb_get_serial_port_data(serial->port[0]);
 
 	if (priv) {
-		cypress_buf_free(priv->buf);
+		kfifo_free(&priv->write_fifo);
 		kfree(priv);
 	}
 }
@@ -704,6 +684,7 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 static void cypress_close(struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -713,12 +694,14 @@ static void cypress_close(struct usb_serial_port *port)
 		mutex_unlock(&port->serial->disc_mutex);
 		return;
 	}
-	cypress_buf_clear(priv->buf);
+	spin_lock_irqsave(&priv->lock, flags);
+	kfifo_reset_out(&priv->write_fifo);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb(port->interrupt_in_urb);
 	usb_kill_urb(port->interrupt_out_urb);
 
-
 	if (stats)
 		dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 			priv->bytes_in, priv->bytes_out, priv->cmd_count);
@@ -730,7 +713,6 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d, %d bytes", __func__, port->number, count);
 
@@ -745,9 +727,7 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (!count)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	count = cypress_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
 
 finish:
 	cypress_send(port);
@@ -807,9 +787,10 @@ static void cypress_send(struct usb_serial_port *port)
 	} else
 		spin_unlock_irqrestore(&priv->lock, flags);
 
-	count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
-				port->interrupt_out_size-offset);
-
+	count = kfifo_out_locked(&priv->write_fifo,
+					&port->interrupt_out_buffer[offset],
+					port->interrupt_out_size - offset,
+					&priv->lock);
 	if (count == 0)
 		return;
 
@@ -875,7 +856,7 @@ static int cypress_write_room(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	room = cypress_buf_space_avail(priv->buf);
+	room = kfifo_avail(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -1143,7 +1124,7 @@ static int cypress_chars_in_buffer(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
-	chars = cypress_buf_data_avail(priv->buf);
+	chars = kfifo_len(&priv->write_fifo);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
@@ -1309,7 +1290,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	/* process read if there is data other than line status */
 	if (tty && bytes > i) {
 		tty_insert_flip_string_fixed_flag(tty, data + i,
-				bytes - i, tty_flag);
+				tty_flag, bytes - i);
 		tty_flip_buffer_push(tty);
 	}
 
@@ -1397,193 +1378,6 @@ static void cypress_write_int_callback(struct urb *urb)
 
 
 /*****************************************************************************
- * Write buffer functions - buffering code from pl2303 used
- *****************************************************************************/
-
-/*
- * cypress_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct cypress_buf *cypress_buf_alloc(unsigned int size)
-{
-
-	struct cypress_buf *cb;
-
-
-	if (size == 0)
-		return NULL;
-
-	cb = kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
-	if (cb == NULL)
-		return NULL;
-
-	cb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (cb->buf_buf == NULL) {
-		kfree(cb);
-		return NULL;
-	}
-
-	cb->buf_size = size;
-	cb->buf_get = cb->buf_put = cb->buf_buf;
-
-	return cb;
-
-}
-
-
-/*
- * cypress_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void cypress_buf_free(struct cypress_buf *cb)
-{
-	if (cb) {
-		kfree(cb->buf_buf);
-		kfree(cb);
-	}
-}
-
-
-/*
- * cypress_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void cypress_buf_clear(struct cypress_buf *cb)
-{
-	if (cb != NULL)
-		cb->buf_get = cb->buf_put;
-		/* equivalent to a get of all data available */
-}
-
-
-/*
- * cypress_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
-{
-	if (cb != NULL)
-		return (cb->buf_size + cb->buf_put - cb->buf_get)
-							% cb->buf_size;
-	else
-		return 0;
-}
-
-
-/*
- * cypress_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
-{
-	if (cb != NULL)
-		return (cb->buf_size + cb->buf_get - cb->buf_put - 1)
-							% cb->buf_size;
-	else
-		return 0;
-}
-
-
-/*
- * cypress_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
-	unsigned int count)
-{
-
-	unsigned int len;
-
-
-	if (cb == NULL)
-		return 0;
-
-	len  = cypress_buf_space_avail(cb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = cb->buf_buf + cb->buf_size - cb->buf_put;
-	if (count > len) {
-		memcpy(cb->buf_put, buf, len);
-		memcpy(cb->buf_buf, buf+len, count - len);
-		cb->buf_put = cb->buf_buf + count - len;
-	} else {
-		memcpy(cb->buf_put, buf, count);
-		if (count < len)
-			cb->buf_put += count;
-		else /* count == len */
-			cb->buf_put = cb->buf_buf;
-	}
-
-	return count;
-
-}
-
-
-/*
- * cypress_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
-	unsigned int count)
-{
-
-	unsigned int len;
-
-
-	if (cb == NULL)
-		return 0;
-
-	len = cypress_buf_data_avail(cb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = cb->buf_buf + cb->buf_size - cb->buf_get;
-	if (count > len) {
-		memcpy(buf, cb->buf_get, len);
-		memcpy(buf+len, cb->buf_buf, count - len);
-		cb->buf_get = cb->buf_buf + count - len;
-	} else {
-		memcpy(buf, cb->buf_get, count);
-		if (count < len)
-			cb->buf_get += count;
-		else /* count == len */
-			cb->buf_get = cb->buf_buf;
-	}
-
-	return count;
-
-}
-
-/*****************************************************************************
  * Module functions
  *****************************************************************************/
 
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1fd360e0406..67cf6082688 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -1,27 +1,32 @@
 #ifndef CYPRESS_M8_H
 #define CYPRESS_M8_H
 
-/* definitions and function prototypes used for the cypress USB to Serial controller */
+/*
+ * definitions and function prototypes used for the cypress USB to Serial
+ * controller
+ */
 
-/* For sending our feature buffer - controlling serial communication states */
-/* Linux HID has no support for serial devices so we do this through the driver */
-#define HID_REQ_GET_REPORT 0x01
-#define HID_REQ_SET_REPORT 0x09
+/*
+ * For sending our feature buffer - controlling serial communication states.
+ * Linux HID has no support for serial devices so we do this through the driver
+ */
+#define HID_REQ_GET_REPORT	0x01
+#define HID_REQ_SET_REPORT	0x09
 
 /* List other cypress USB to Serial devices here, and add them to the id_table */
 
 /* DeLorme Earthmate USB - a GPS device */
-#define	VENDOR_ID_DELORME		 0x1163
-#define PRODUCT_ID_EARTHMATEUSB		 0x0100
-#define PRODUCT_ID_EARTHMATEUSB_LT20	 0x0200
+#define VENDOR_ID_DELORME		0x1163
+#define PRODUCT_ID_EARTHMATEUSB		0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20	0x0200
 
 /* Cypress HID->COM RS232 Adapter */
-#define VENDOR_ID_CYPRESS		 0x04b4
-#define PRODUCT_ID_CYPHIDCOM		 0x5500
+#define VENDOR_ID_CYPRESS		0x04b4
+#define PRODUCT_ID_CYPHIDCOM		0x5500
 
 /* Powercom UPS, chip CY7C63723 */
-#define VENDOR_ID_POWERCOM		 0x0d9f
-#define PRODUCT_ID_UPS			 0x0002
+#define VENDOR_ID_POWERCOM		0x0d9f
+#define PRODUCT_ID_UPS			0x0002
 
 /* Nokia CA-42 USB to serial cable */
 #define VENDOR_ID_DAZZLE		0x07d0
@@ -29,17 +34,17 @@
 /* End of device listing */
 
 /* Used for setting / requesting serial line settings */
-#define CYPRESS_SET_CONFIG 0x01
-#define CYPRESS_GET_CONFIG 0x02
+#define CYPRESS_SET_CONFIG	0x01
+#define CYPRESS_GET_CONFIG	0x02
 
 /* Used for throttle control */
-#define THROTTLED 0x1
-#define ACTUALLY_THROTTLED 0x2
+#define THROTTLED		0x1
+#define ACTUALLY_THROTTLED	0x2
 
-/* chiptypes - used in case firmware differs from the generic form ... offering
- * 	different baud speeds/etc.
+/*
+ * chiptypes - used in case firmware differs from the generic form ... offering
+ * different baud speeds/etc.
  */
-
 #define CT_EARTHMATE	0x01
 #define CT_CYPHIDCOM	0x02
 #define CT_CA42V2	0x03
@@ -50,15 +55,15 @@
 /* these are sent / read at byte 0 of the input/output hid reports */
 /* You can find these values defined in the CY4601 USB to Serial design notes */
 
-#define CONTROL_DTR 	0x20	/* data terminal ready - flow control - host to device */
+#define CONTROL_DTR	0x20	/* data terminal ready - flow control - host to device */
 #define UART_DSR	0x20	/* data set ready - flow control - device to host */
-#define CONTROL_RTS 	0x10	/* request to send - flow control - host to device */
+#define CONTROL_RTS	0x10	/* request to send - flow control - host to device */
 #define UART_CTS	0x10	/* clear to send - flow control - device to host */
-#define	UART_RI		0x10	/* ring indicator - modem - device to host */
+#define UART_RI		0x10	/* ring indicator - modem - device to host */
 #define UART_CD		0x40	/* carrier detect - modem - device to host */
-#define CYP_ERROR 	0x08	/* received from input report - device to host */
+#define CYP_ERROR	0x08	/* received from input report - device to host */
 /* Note - the below has nothing to do with the "feature report" reset */
-#define CONTROL_RESET	0x08  	/* sent with output report - host to device */
+#define CONTROL_RESET	0x08	/* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 68b0aa5e516..3edda3ed822 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1703,8 +1703,8 @@ static int digi_read_inb_callback(struct urb *urb)
 		/* data length is len-1 (one byte of len is port_status) */
 		--len;
 		if (len > 0) {
-			tty_insert_flip_string_fixed_flag(tty, data, len,
-									flag);
+			tty_insert_flip_string_fixed_flag(tty, data, flag,
+									len);
 			tty_flip_buffer_push(tty);
 		}
 	}
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 5f740a1eaca..504b5585ea4 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -13,44 +13,6 @@
  *
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
- *
- * (07/16/2001) gb
- *	remove unused code in empeg_close() (thanks to Oliver Neukum for
- *	pointing this out) and rewrote empeg_set_termios().
- *
- * (05/30/2001) gkh
- *	switched from using spinlock to a semaphore, which fixes lots of
- * problems.
- *
- * (04/08/2001) gb
- *      Identify version on module load.
- *
- * (01/22/2001) gb
- *	Added write_room() and chars_in_buffer() support.
- *
- * (12/21/2000) gb
- *	Moved termio stuff inside the port->active check.
- *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
- *
- * (12/03/2000) gb
- *	Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
- *	This notifies the tty driver that the termios have changed.
- *
- * (11/13/2000) gb
- *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
- *	empeg_open() (It only needs to be set once - Doh!)
- *
- * (11/11/2000) gb
- *	Updated to work with id_table structure.
- *
- * (11/04/2000) gb
- *	Forked this from visor.c, and hacked it up to work with an
- *	Empeg ltd. empeg-car player.  Constructive criticism welcomed.
- *	I would like to say, 'Thank You' to Greg Kroah-Hartman for the
- *	use of his code, and for his guidance, advice and patience. :)
- *	A 'Thank You' is in order for John Ripley of Empeg ltd for his
- *	advice, and patience too.
- *
  */
 
 #include <linux/kernel.h>
@@ -71,7 +33,7 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.2"
+#define DRIVER_VERSION "v1.3"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>"
 #define DRIVER_DESC "USB Empeg Mark I/II Driver"
 
@@ -79,19 +41,8 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void empeg_close(struct usb_serial_port *port);
-static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
-						const unsigned char *buf,
-						int count);
-static int  empeg_write_room(struct tty_struct *tty);
-static int  empeg_chars_in_buffer(struct tty_struct *tty);
-static void empeg_throttle(struct tty_struct *tty);
-static void empeg_unthrottle(struct tty_struct *tty);
 static int  empeg_startup(struct usb_serial *serial);
 static void empeg_init_termios(struct tty_struct *tty);
-static void empeg_write_bulk_callback(struct urb *urb);
-static void empeg_read_bulk_callback(struct urb *urb);
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
@@ -105,7 +56,7 @@ static struct usb_driver empeg_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver empeg_device = {
@@ -114,291 +65,16 @@ static struct usb_serial_driver empeg_device = {
 		.name =		"empeg",
 	},
 	.id_table =		id_table,
-	.usb_driver = 		&empeg_driver,
+	.usb_driver =		&empeg_driver,
 	.num_ports =		1,
-	.open =			empeg_open,
-	.close =		empeg_close,
-	.throttle =		empeg_throttle,
-	.unthrottle =		empeg_unthrottle,
+	.bulk_out_size =	256,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		empeg_startup,
 	.init_termios =		empeg_init_termios,
-	.write =		empeg_write,
-	.write_room =		empeg_write_room,
-	.chars_in_buffer =	empeg_chars_in_buffer,
-	.write_bulk_callback =	empeg_write_bulk_callback,
-	.read_bulk_callback =	empeg_read_bulk_callback,
 };
 
-#define NUM_URBS			16
-#define URB_TRANSFER_BUFFER_SIZE	4096
-
-static struct urb	*write_urb_pool[NUM_URBS];
-static spinlock_t	write_urb_pool_lock;
-static int		bytes_in;
-static int		bytes_out;
-
-/******************************************************************************
- * Empeg specific driver functions
- ******************************************************************************/
-static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
-{
-	struct usb_serial *serial = port->serial;
-	int result = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	bytes_in = 0;
-	bytes_out = 0;
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		serial->dev,
-		usb_rcvbulkpipe(serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		empeg_read_bulk_callback,
-		port);
-
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-
-	return result;
-}
-
-
-static void empeg_close(struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
-	/* Uncomment the following line if you want to see some statistics in your syslog */
-	/* dev_info (&port->dev, "Bytes In = %d  Bytes Out = %d\n", bytes_in, bytes_out); */
-}
-
-
-static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	const unsigned char *current_position = buf;
-	unsigned long flags;
-	int status;
-	int i;
-	int bytes_sent = 0;
-	int transfer_size;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		/* try to find a free urb in our list of them */
-		urb = NULL;
-
-		spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-		for (i = 0; i < NUM_URBS; ++i) {
-			if (write_urb_pool[i]->status != -EINPROGRESS) {
-				urb = write_urb_pool[i];
-				break;
-			}
-		}
-
-		spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-
-		if (urb == NULL) {
-			dbg("%s - no more free urbs", __func__);
-			goto exit;
-		}
-
-		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
-			if (urb->transfer_buffer == NULL) {
-				dev_err(&port->dev,
-					"%s no more kernel memory...\n",
-								__func__);
-				goto exit;
-			}
-		}
-
-		transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-		memcpy(urb->transfer_buffer, current_position, transfer_size);
-
-		usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
-
-		/* build up our urb */
-		usb_fill_bulk_urb(
-			urb,
-			serial->dev,
-			usb_sndbulkpipe(serial->dev,
-					port->bulk_out_endpointAddress),
-			urb->transfer_buffer,
-			transfer_size,
-			empeg_write_bulk_callback,
-			port);
-
-		/* send it down the pipe */
-		status = usb_submit_urb(urb, GFP_ATOMIC);
-		if (status) {
-			dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status);
-			bytes_sent = status;
-			break;
-		}
-
-		current_position += transfer_size;
-		bytes_sent += transfer_size;
-		count -= transfer_size;
-		bytes_out += transfer_size;
-
-	}
-exit:
-	return bytes_sent;
-}
-
-
-static int empeg_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int room = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-	/* tally up the number of bytes available */
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-	}
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-	dbg("%s - returns %d", __func__, room);
-	return room;
-
-}
-
-
-static int empeg_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int chars = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-	/* tally up the number of bytes waiting */
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-}
-
-
-static void empeg_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_port_softint(port);
-}
-
-
-static void empeg_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-	tty = tty_port_tty_get(&port->port);
-
-	if (urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-		bytes_in += urb->actual_length;
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		port->serial->dev,
-		usb_rcvbulkpipe(port->serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		empeg_read_bulk_callback,
-		port);
-
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
-	if (result)
-		dev_err(&urb->dev->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-
-	return;
-
-}
-
-
-static void empeg_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s - port %d", __func__, port->number);
-	usb_kill_urb(port->read_urb);
-}
-
-
-static void empeg_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int result;
-	dbg("%s - port %d", __func__, port->number);
-
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-}
-
-
-static int  empeg_startup(struct usb_serial *serial)
+static int empeg_startup(struct usb_serial *serial)
 {
 	int r;
 
@@ -414,10 +90,8 @@ static int  empeg_startup(struct usb_serial *serial)
 
 	/* continue on with initialization */
 	return r;
-
 }
 
-
 static void empeg_init_termios(struct tty_struct *tty)
 {
 	struct ktermios *termios = tty->termios;
@@ -462,77 +136,28 @@ static void empeg_init_termios(struct tty_struct *tty)
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
-
 static int __init empeg_init(void)
 {
-	struct urb *urb;
-	int i, retval;
-
-	/* create our write urb pool and transfer buffers */
-	spin_lock_init(&write_urb_pool_lock);
-	for (i = 0; i < NUM_URBS; ++i) {
-		urb = usb_alloc_urb(0, GFP_KERNEL);
-		write_urb_pool[i] = urb;
-		if (urb == NULL) {
-			printk(KERN_ERR "empeg: No more urbs???\n");
-			continue;
-		}
-
-		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
-								GFP_KERNEL);
-		if (!urb->transfer_buffer) {
-			printk(KERN_ERR "empeg: %s - out of memory for urb "
-			       "buffers.", __func__);
-			continue;
-		}
-	}
+	int retval;
 
 	retval = usb_serial_register(&empeg_device);
 	if (retval)
-		goto failed_usb_serial_register;
+		return retval;
 	retval = usb_register(&empeg_driver);
-	if (retval)
-		goto failed_usb_register;
-
+	if (retval) {
+		usb_serial_deregister(&empeg_device);
+		return retval;
+	}
 	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
 	       DRIVER_DESC "\n");
 
 	return 0;
-failed_usb_register:
-	usb_serial_deregister(&empeg_device);
-failed_usb_serial_register:
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]) {
-			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb(write_urb_pool[i]);
-		}
-	}
-	return retval;
 }
 
-
 static void __exit empeg_exit(void)
 {
-	int i;
-	unsigned long flags;
-
 	usb_deregister(&empeg_driver);
 	usb_serial_deregister(&empeg_device);
-
-	spin_lock_irqsave(&write_urb_pool_lock, flags);
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (write_urb_pool[i]) {
-			/* FIXME - uncomment the following usb_kill_urb call
-			 * when the host controllers get fixed to set urb->dev
-			 * = NULL after the urb is finished.  Otherwise this
-			 * call oopses. */
-			/* usb_kill_urb(write_urb_pool[i]); */
-			kfree(write_urb_pool[i]->transfer_buffer);
-			usb_free_urb(write_urb_pool[i]);
-		}
-	}
-	spin_unlock_irqrestore(&write_urb_pool_lock, flags);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1d7c4fac02e..050211afc07 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1,6 +1,8 @@
 /*
  * USB FTDI SIO driver
  *
+ *	Copyright (C) 2009 - 2010
+ *	    Johan Hovold (jhovold@gmail.com)
  *	Copyright (C) 1999 - 2001
  *	    Greg Kroah-Hartman (greg@kroah.com)
  *          Bill Ryder (bryder@sgi.com)
@@ -49,8 +51,8 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
+#define DRIVER_VERSION "v1.6.0"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -59,7 +61,7 @@ static __u16 product;
 
 struct ftdi_private {
 	struct kref kref;
-	ftdi_chip_type_t chip_type;
+	enum ftdi_chip_type chip_type;
 				/* type of device, either SIO or FT8U232AM */
 	int baud_base;		/* baud base clock for divisor setting */
 	int custom_divisor;	/* custom_divisor kludge, this is for
@@ -69,10 +71,6 @@ struct ftdi_private {
 				/* the last data state set - needed for doing
 				 * a break
 				 */
-	int write_offset;       /* This is the offset in the usb data block to
-				 * write the serial data - it varies between
-				 * devices
-				 */
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
@@ -87,9 +85,6 @@ struct ftdi_private {
 				   be enabled */
 
 	unsigned int latency;		/* latency setting in use */
-	spinlock_t tx_lock;	/* spinlock for transmit state */
-	unsigned long tx_outstanding_bytes;
-	unsigned long tx_outstanding_urbs;
 	unsigned short max_packet_size;
 	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
 };
@@ -768,9 +763,6 @@ static const char *ftdi_chip_name[] = {
 };
 
 
-/* Constants for read urb and write urb */
-#define BUFSZ 512
-
 /* Used for TIOCMIWAIT */
 #define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
 #define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
@@ -787,13 +779,9 @@ static int  ftdi_sio_port_remove(struct usb_serial_port *port);
 static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
-static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  ftdi_write_room(struct tty_struct *tty);
-static int  ftdi_chars_in_buffer(struct tty_struct *tty);
-static void ftdi_write_bulk_callback(struct urb *urb);
-static void ftdi_read_bulk_callback(struct urb *urb);
-static void ftdi_process_read(struct usb_serial_port *port);
+static void ftdi_process_read_urb(struct urb *urb);
+static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
 static void ftdi_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
@@ -802,8 +790,6 @@ static int  ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 static int  ftdi_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
-static void ftdi_throttle(struct tty_struct *tty);
-static void ftdi_unthrottle(struct tty_struct *tty);
 
 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
@@ -821,19 +807,18 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.usb_driver = 		&ftdi_driver,
 	.id_table =		id_table_combined,
 	.num_ports =		1,
+	.bulk_in_size =		512,
+	.bulk_out_size =	256,
 	.probe =		ftdi_sio_probe,
 	.port_probe =		ftdi_sio_port_probe,
 	.port_remove =		ftdi_sio_port_remove,
 	.open =			ftdi_open,
 	.close =		ftdi_close,
 	.dtr_rts =		ftdi_dtr_rts,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	ftdi_process_read_urb,
+	.prepare_write_buffer =	ftdi_prepare_write_buffer,
 	.tiocmget =		ftdi_tiocmget,
 	.tiocmset =		ftdi_tiocmset,
 	.ioctl =		ftdi_ioctl,
@@ -849,9 +834,6 @@ static struct usb_serial_driver ftdi_sio_device = {
 #define HIGH 1
 #define LOW 0
 
-/* number of outstanding urbs to prevent userspace DoS from happening */
-#define URB_UPPER_LIMIT	42
-
 /*
  * ***************************************************************************
  * Utility functions
@@ -987,7 +969,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 
 static __u32 get_ftdi_divisor(struct tty_struct *tty,
 						struct usb_serial_port *port)
-{ /* get_ftdi_divisor */
+{
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u32 div_value = 0;
 	int div_okay = 1;
@@ -1211,12 +1193,11 @@ static int get_serial_info(struct usb_serial_port *port,
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
 	return 0;
-} /* get_serial_info */
-
+}
 
 static int set_serial_info(struct tty_struct *tty,
 	struct usb_serial_port *port, struct serial_struct __user *newinfo)
-{ /* set_serial_info */
+{
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct new_serial;
 	struct ftdi_private old_priv;
@@ -1279,8 +1260,7 @@ check_and_exit:
 	else
 		mutex_unlock(&priv->cfg_lock);
 	return 0;
-
-} /* set_serial_info */
+}
 
 
 /* Determine type of FTDI chip based on USB config and descriptor. */
@@ -1294,7 +1274,6 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 
 	/* Assume it is not the original SIO device for now. */
 	priv->baud_base = 48000000 / 2;
-	priv->write_offset = 0;
 
 	version = le16_to_cpu(udev->descriptor.bcdDevice);
 	interfaces = udev->actconfig->desc.bNumInterfaces;
@@ -1336,7 +1315,6 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 		/* Old device.  Assume it's the original SIO. */
 		priv->chip_type = SIO;
 		priv->baud_base = 12000000 / 16;
-		priv->write_offset = 1;
 	} else if (version < 0x400) {
 		/* Assume it's an FT8U232AM (or FT8U245AM) */
 		/* (It might be a BM because of the iSerialNumber bug,
@@ -1543,7 +1521,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	}
 
 	kref_init(&priv->kref);
-	spin_lock_init(&priv->tx_lock);
 	mutex_init(&priv->cfg_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 
@@ -1552,28 +1529,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
 
-	/* Increase the size of read buffers */
-	kfree(port->bulk_in_buffer);
-	port->bulk_in_buffer = kmalloc(BUFSZ, GFP_KERNEL);
-	if (!port->bulk_in_buffer) {
-		kfree(priv);
-		return -ENOMEM;
-	}
-	if (port->read_urb) {
-		port->read_urb->transfer_buffer = port->bulk_in_buffer;
-		port->read_urb->transfer_buffer_length = BUFSZ;
-	}
-
 	priv->port = port;
-
-	/* Free port's existing write urb and transfer buffer. */
-	if (port->write_urb) {
-		usb_free_urb(port->write_urb);
-		port->write_urb = NULL;
-	}
-	kfree(port->bulk_out_buffer);
-	port->bulk_out_buffer = NULL;
-
 	usb_set_serial_port_data(port, priv);
 
 	ftdi_determine_type(port);
@@ -1594,7 +1550,7 @@ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
 	priv->force_baud = 38400;
-} /* ftdi_USB_UIRT_setup */
+}
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
  * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
@@ -1607,7 +1563,7 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 	priv->custom_divisor = 240;
 	priv->force_baud = 38400;
 	priv->force_rtscts = 1;
-} /* ftdi_HE_TIRA1_setup */
+}
 
 /*
  * Module parameter to control latency timer for NDI FTDI-based USB devices.
@@ -1700,31 +1656,10 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
-{
-	struct urb *urb = port->read_urb;
-	struct usb_serial *serial = port->serial;
-	int result;
-
-	usb_fill_bulk_urb(urb, serial->dev,
-			   usb_rcvbulkpipe(serial->dev,
-					port->bulk_in_endpointAddress),
-			   urb->transfer_buffer,
-			   urb->transfer_buffer_length,
-			   ftdi_read_bulk_callback, port);
-	result = usb_submit_urb(urb, mem_flags);
-	if (result && result != -EPERM)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-	return result;
-}
-
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
-{ /* ftdi_open */
+{
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	int result;
 
 	dbg("%s", __func__);
@@ -1746,20 +1681,13 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		ftdi_set_termios(tty, port, tty->termios);
 
-	/* Not throttled */
-	spin_lock_irqsave(&port->lock, flags);
-	port->throttled = 0;
-	port->throttle_req = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-
 	/* Start reading from the device */
-	result = ftdi_submit_read_urb(port, GFP_KERNEL);
+	result = usb_serial_generic_open(tty, port);
 	if (!result)
 		kref_get(&priv->kref);
 
 	return result;
-} /* ftdi_open */
-
+}
 
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 {
@@ -1789,22 +1717,16 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
  * usbserial:__serial_close  only calls ftdi_close if the point is open
  *
  *   This only gets called when it is the last close
- *
- *
  */
-
 static void ftdi_close(struct usb_serial_port *port)
-{ /* ftdi_close */
+{
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s", __func__);
 
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	kref_put(&priv->kref, ftdi_sio_priv_release);
-} /* ftdi_close */
-
-
+}
 
 /* The SIO requires the first byte to have:
  *  B0 1
@@ -1813,211 +1735,39 @@ static void ftdi_close(struct usb_serial_port *port)
  *
  * The new devices do not require this byte
  */
-static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
-			   const unsigned char *buf, int count)
-{ /* ftdi_write */
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct urb *urb;
-	unsigned char *buffer;
-	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
-	int status;
-	int transfer_size;
+static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	struct ftdi_private *priv;
+	int count;
 	unsigned long flags;
 
-	dbg("%s port %d, %d bytes", __func__, port->number, count);
-
-	if (count == 0) {
-		dbg("write request of 0 bytes");
-		return 0;
-	}
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dbg("%s - write limit hit", __func__);
-		return 0;
-	}
-	priv->tx_outstanding_urbs++;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	data_offset = priv->write_offset;
-	dbg("data_offset set to %d", data_offset);
-
-	/* Determine total transfer size */
-	transfer_size = count;
-	if (data_offset > 0) {
-		/* Original sio needs control bytes too... */
-		transfer_size += (data_offset *
-				((count + (priv->max_packet_size - 1 - data_offset)) /
-				 (priv->max_packet_size - data_offset)));
-	}
-
-	buffer = kmalloc(transfer_size, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&port->dev,
-			"%s ran out of kernel memory for urb ...\n", __func__);
-		count = -ENOMEM;
-		goto error_no_buffer;
-	}
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		dev_err(&port->dev, "%s - no more free urbs\n", __func__);
-		count = -ENOMEM;
-		goto error_no_urb;
-	}
+	priv = usb_get_serial_port_data(port);
 
-	/* Copy data */
-	if (data_offset > 0) {
-		/* Original sio requires control byte at start of
-		   each packet. */
-		int user_pktsz = priv->max_packet_size - data_offset;
-		int todo = count;
-		unsigned char *first_byte = buffer;
-		const unsigned char *current_position = buf;
-
-		while (todo > 0) {
-			if (user_pktsz > todo)
-				user_pktsz = todo;
-			/* Write the control byte at the front of the packet*/
-			*first_byte = 1 | ((user_pktsz) << 2);
-			/* Copy data for packet */
-			memcpy(first_byte + data_offset,
-				current_position, user_pktsz);
-			first_byte += user_pktsz + data_offset;
-			current_position += user_pktsz;
-			todo -= user_pktsz;
+	if (priv->chip_type == SIO) {
+		unsigned char *buffer = dest;
+		int i, len, c;
+
+		count = 0;
+		spin_lock_irqsave(&port->lock, flags);
+		for (i = 0; i < size - 1; i += priv->max_packet_size) {
+			len = min_t(int, size - i, priv->max_packet_size) - 1;
+			c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
+			if (!c)
+				break;
+			buffer[i] = (c << 2) + 1;
+			count += c + 1;
 		}
+		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
-		/* No control byte required. */
-		/* Copy in the data to send */
-		memcpy(buffer, buf, count);
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						transfer_size, buffer);
-
-	/* fill the buffer and send it */
-	usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_sndbulkpipe(port->serial->dev,
-					port->bulk_out_endpointAddress),
-			buffer, transfer_size,
-			ftdi_write_bulk_callback, port);
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, status);
-		count = status;
-		goto error;
-	} else {
-		spin_lock_irqsave(&priv->tx_lock, flags);
-		priv->tx_outstanding_bytes += count;
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
+		count = kfifo_out_locked(&port->write_fifo, dest, size,
+								&port->lock);
 	}
 
-	/* we are done with this urb, so let the host driver
-	 * really free it when it is finished with it */
-	usb_free_urb(urb);
-
-	dbg("%s write returning: %d", __func__, count);
-	return count;
-error:
-	usb_free_urb(urb);
-error_no_urb:
-	kfree(buffer);
-error_no_buffer:
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	priv->tx_outstanding_urbs--;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	return count;
-} /* ftdi_write */
-
-
-/* This function may get called when the device is closed */
-
-static void ftdi_write_bulk_callback(struct urb *urb)
-{
-	unsigned long flags;
-	struct usb_serial_port *port = urb->context;
-	struct ftdi_private *priv;
-	int data_offset;       /* will be 1 for the SIO and 0 otherwise */
-	unsigned long countback;
-	int status = urb->status;
-
-	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree(urb->transfer_buffer);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		return;
-	}
-	/* account for transferred data */
-	countback = urb->transfer_buffer_length;
-	data_offset = priv->write_offset;
-	if (data_offset > 0) {
-		/* Subtract the control bytes */
-		countback -= (data_offset * DIV_ROUND_UP(countback, priv->max_packet_size));
-	}
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	--priv->tx_outstanding_urbs;
-	priv->tx_outstanding_bytes -= countback;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	if (status) {
-		dbg("nonzero write bulk status received: %d", status);
-	}
-
-	usb_serial_port_softint(port);
-} /* ftdi_write_bulk_callback */
-
-
-static int ftdi_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int room;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
-		/*
-		 * We really can take anything the user throws at us
-		 * but let's pick a nice big number to tell the tty
-		 * layer that we have lots of free space
-		 */
-		room = 2048;
-	} else {
-		room = 0;
-	}
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-	return room;
 }
 
-static int ftdi_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int buffered;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	buffered = (int)priv->tx_outstanding_bytes;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-	if (buffered < 0) {
-		dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
-			__func__);
-		buffered = 0;
-	}
-	return buffered;
-}
+#define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
 
 static int ftdi_process_packet(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ftdi_private *priv,
@@ -2045,28 +1795,21 @@ static int ftdi_process_packet(struct tty_struct *tty,
 		priv->prev_status = status;
 	}
 
-	/*
-	 * Although the device uses a bitmask and hence can have multiple
-	 * errors on a packet - the order here sets the priority the error is
-	 * returned to the tty layer.
-	 */
 	flag = TTY_NORMAL;
-	if (packet[1] & FTDI_RS_OE) {
-		flag = TTY_OVERRUN;
-		dbg("OVERRRUN error");
-	}
-	if (packet[1] & FTDI_RS_BI) {
-		flag = TTY_BREAK;
-		dbg("BREAK received");
-		usb_serial_handle_break(port);
-	}
-	if (packet[1] & FTDI_RS_PE) {
-		flag = TTY_PARITY;
-		dbg("PARITY error");
-	}
-	if (packet[1] & FTDI_RS_FE) {
-		flag = TTY_FRAME;
-		dbg("FRAMING error");
+	if (packet[1] & FTDI_RS_ERR_MASK) {
+		/* Break takes precedence over parity, which takes precedence
+		 * over framing errors */
+		if (packet[1] & FTDI_RS_BI) {
+			flag = TTY_BREAK;
+			usb_serial_handle_break(port);
+		} else if (packet[1] & FTDI_RS_PE) {
+			flag = TTY_PARITY;
+		} else if (packet[1] & FTDI_RS_FE) {
+			flag = TTY_FRAME;
+		}
+		/* Overrun is special, not associated with a char */
+		if (packet[1] & FTDI_RS_OE)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
 
 	len -= 2;
@@ -2074,20 +1817,21 @@ static int ftdi_process_packet(struct tty_struct *tty,
 		return 0;	/* status only */
 	ch = packet + 2;
 
-	if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
-		tty_insert_flip_string(tty, ch, len);
-	else {
+	if (port->port.console && port->sysrq) {
 		for (i = 0; i < len; i++, ch++) {
 			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
 				tty_insert_flip_char(tty, *ch, flag);
 		}
+	} else {
+		tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
 	}
+
 	return len;
 }
 
-static void ftdi_process_read(struct usb_serial_port *port)
+static void ftdi_process_read_urb(struct urb *urb)
 {
-	struct urb *urb = port->read_urb;
+	struct usb_serial_port *port = urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char *data = (char *)urb->transfer_buffer;
@@ -2109,32 +1853,6 @@ static void ftdi_process_read(struct usb_serial_port *port)
 	tty_kref_put(tty);
 }
 
-static void ftdi_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (urb->status) {
-		dbg("%s - nonzero read bulk status received: %d",
-						__func__, urb->status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-				urb->actual_length, urb->transfer_buffer);
-	ftdi_process_read(port);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->throttled = port->throttle_req;
-	if (!port->throttled) {
-		spin_unlock_irqrestore(&port->lock, flags);
-		ftdi_submit_read_urb(port, GFP_ATOMIC);
-	} else
-		spin_unlock_irqrestore(&port->lock, flags);
-}
-
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
@@ -2165,15 +1883,13 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 
 }
 
-
 /* old_termios contains the original termios settings and tty->termios contains
  * the new setting to be used
  * WARNING: set_termios calls this with old_termios in kernel space
  */
-
 static void ftdi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
-{ /* ftdi_termios */
+{
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct ktermios *termios = tty->termios;
@@ -2401,7 +2117,6 @@ static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
 	return update_mctrl(port, set, clear);
 }
 
-
 static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
@@ -2470,35 +2185,6 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void ftdi_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&port->lock, flags);
-	port->throttle_req = 1;
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-void ftdi_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int was_throttled;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&port->lock, flags);
-	was_throttled = port->throttled;
-	port->throttled = port->throttle_req = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
-
-	if (was_throttled)
-		ftdi_submit_read_urb(port, GFP_KERNEL);
-}
-
 static int __init ftdi_init(void)
 {
 	int retval;
@@ -2529,15 +2215,12 @@ failed_sio_register:
 	return retval;
 }
 
-
 static void __exit ftdi_exit(void)
 {
-
 	dbg("%s", __func__);
 
 	usb_deregister(&ftdi_driver);
 	usb_serial_deregister(&ftdi_sio_device);
-
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ff9bf80327a..213fe3d6128 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -23,14 +23,16 @@
  */
 
 /* Commands */
-#define FTDI_SIO_RESET 		0 /* Reset the port */
-#define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
-#define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
-#define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
-#define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem status register */
-#define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
-#define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
+#define FTDI_SIO_RESET			0 /* Reset the port */
+#define FTDI_SIO_MODEM_CTRL		1 /* Set the modem control register */
+#define FTDI_SIO_SET_FLOW_CTRL		2 /* Set flow control register */
+#define FTDI_SIO_SET_BAUD_RATE		3 /* Set baud rate */
+#define FTDI_SIO_SET_DATA		4 /* Set the data characteristics of
+					     the port */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem
+					     status register */
+#define FTDI_SIO_SET_EVENT_CHAR		6 /* Set the event character */
+#define FTDI_SIO_SET_ERROR_CHAR		7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
@@ -52,7 +54,7 @@
  */
 
 /* Port Identifier Table */
-#define PIT_DEFAULT 		0 /* SIOA */
+#define PIT_DEFAULT		0 /* SIOA */
 #define PIT_SIOA		1 /* SIOA */
 /* The device this driver is tested with one has only one port */
 #define PIT_SIOB		2 /* SIOB */
@@ -103,20 +105,21 @@
  * wLength:        0
  * Data:           None
  * The BaudDivisor values are calculated as follows:
- * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish
- *   I knew how to detect old chips to select proper base clock!
+ * - BaseClock is either 12000000 or 48000000 depending on the device.
+ *   FIXME: I wish I knew how to detect old chips to select proper base clock!
  * - BaudDivisor is a fixed point number encoded in a funny way.
  *   (--WRONG WAY OF THINKING--)
  *   BaudDivisor is a fixed point number encoded with following bit weighs:
  *   (-2)(-1)(13..0). It is a radical with a denominator of 4, so values
  *   end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...).
  *   (--THE REALITY--)
- *   The both-bits-set has quite different meaning from 0.75 - the chip designers
- *   have decided it to mean 0.125 instead of 0.75.
+ *   The both-bits-set has quite different meaning from 0.75 - the chip
+ *   designers have decided it to mean 0.125 instead of 0.75.
  *   This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates
  *   and Flow Control Consideration for USB to RS232".
  * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should
- *   automagically re-encode the resulting value to take fractions into consideration.
+ *   automagically re-encode the resulting value to take fractions into
+ *   consideration.
  * As all values are integers, some bit twiddling is in order:
  *   BaudDivisor = (BaseClock / 16 / BaudRate) |
  *   (((BaseClock / 2 / BaudRate) & 4) ? 0x4000    // 0.5
@@ -146,7 +149,7 @@
  * not supported by the FT8U232AM).
  */
 
-typedef enum {
+enum ftdi_chip_type {
 	SIO = 1,
 	FT8U232AM = 2,
 	FT232BM = 3,
@@ -154,37 +157,36 @@ typedef enum {
 	FT232RL = 5,
 	FT2232H = 6,
 	FT4232H = 7
-} ftdi_chip_type_t;
-
-typedef enum {
- ftdi_sio_b300 = 0,
- ftdi_sio_b600 = 1,
- ftdi_sio_b1200 = 2,
- ftdi_sio_b2400 = 3,
- ftdi_sio_b4800 = 4,
- ftdi_sio_b9600 = 5,
- ftdi_sio_b19200 = 6,
- ftdi_sio_b38400 = 7,
- ftdi_sio_b57600 = 8,
- ftdi_sio_b115200 = 9
-} FTDI_SIO_baudrate_t;
+};
+
+enum ftdi_sio_baudrate {
+	ftdi_sio_b300 = 0,
+	ftdi_sio_b600 = 1,
+	ftdi_sio_b1200 = 2,
+	ftdi_sio_b2400 = 3,
+	ftdi_sio_b4800 = 4,
+	ftdi_sio_b9600 = 5,
+	ftdi_sio_b19200 = 6,
+	ftdi_sio_b38400 = 7,
+	ftdi_sio_b57600 = 8,
+	ftdi_sio_b115200 = 9
+};
 
 /*
- * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values
- * are calculated internally.
+ * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor
+ * values are calculated internally.
  */
-
-#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA
-#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40
-#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8)
-#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8)
-#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
-#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
-#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
-#define FTDI_SIO_SET_BREAK (0x1 << 14)
+#define FTDI_SIO_SET_DATA_REQUEST	FTDI_SIO_SET_DATA
+#define FTDI_SIO_SET_DATA_REQUEST_TYPE	0x40
+#define FTDI_SIO_SET_DATA_PARITY_NONE	(0x0 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_ODD	(0x1 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_EVEN	(0x2 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_MARK	(0x3 << 8)
+#define FTDI_SIO_SET_DATA_PARITY_SPACE	(0x4 << 8)
+#define FTDI_SIO_SET_DATA_STOP_BITS_1	(0x0 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_15	(0x1 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_2	(0x2 << 11)
+#define FTDI_SIO_SET_BREAK		(0x1 << 14)
 /* FTDI_SIO_SET_DATA */
 
 /*
@@ -287,8 +289,8 @@ typedef enum {
  *
  * A value of zero in the hIndex field disables handshaking
  *
- * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character
- * and the lValue field contains the XON character.
+ * If Xon/Xoff handshaking is specified, the hValue field should contain the
+ * XOFF character and the lValue field contains the XON character.
  */
 
 /*
@@ -373,7 +375,10 @@ typedef enum {
 
 /* FTDI_SIO_SET_ERROR_CHAR */
 
-/* Set the parity error replacement character for the specified communications port */
+/*
+ * Set the parity error replacement character for the specified communications
+ * port
+ */
 
 /*
  *  BmRequestType:  0100 0000b
@@ -496,9 +501,10 @@ typedef enum {
  *
  * IN Endpoint
  *
- * The device reserves the first two bytes of data on this endpoint to contain the current
- * values of the modem and line status registers. In the absence of data, the device 
- * generates a message consisting of these two status bytes every 40 ms
+ * The device reserves the first two bytes of data on this endpoint to contain
+ * the current values of the modem and line status registers. In the absence of
+ * data, the device generates a message consisting of these two status bytes
+ * every 40 ms
  *
  * Byte 0: Modem Status
  *
@@ -530,21 +536,21 @@ typedef enum {
 #define FTDI_RS0_RI	(1 << 6)
 #define FTDI_RS0_RLSD	(1 << 7)
 
-#define FTDI_RS_DR  1
-#define FTDI_RS_OE (1<<1)
-#define FTDI_RS_PE (1<<2)
-#define FTDI_RS_FE (1<<3)
-#define FTDI_RS_BI (1<<4)
-#define FTDI_RS_THRE (1<<5)
-#define FTDI_RS_TEMT (1<<6)
-#define FTDI_RS_FIFO  (1<<7)
+#define FTDI_RS_DR	1
+#define FTDI_RS_OE	(1<<1)
+#define FTDI_RS_PE	(1<<2)
+#define FTDI_RS_FE	(1<<3)
+#define FTDI_RS_BI	(1<<4)
+#define FTDI_RS_THRE	(1<<5)
+#define FTDI_RS_TEMT	(1<<6)
+#define FTDI_RS_FIFO	(1<<7)
 
 /*
  * OUT Endpoint
  *
- * This device reserves the first bytes of data on this endpoint contain the length
- * and port identifier of the message. For the FTDI USB Serial converter the port 
- * identifier is always 1.
+ * This device reserves the first bytes of data on this endpoint contain the
+ * length and port identifier of the message. For the FTDI USB Serial converter
+ * the port identifier is always 1.
  *
  * Byte 0: Line Status
  *
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 75482cbc399..94d86c3febc 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -275,8 +275,8 @@
 /*
  * Hameg HO820 and HO870 interface (using VID 0x0403)
  */
-#define        HAMEG_HO820_PID         0xed74
-#define        HAMEG_HO870_PID         0xed71
+#define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO870_PID			0xed71
 
 /*
  *  MaxStream devices	www.maxstream.net
@@ -289,14 +289,14 @@
  * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
  * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
  */
-#define FTDI_MHAM_KW_PID 0xEEE8		/* USB-KW interface */
-#define FTDI_MHAM_YS_PID 0xEEE9		/* USB-YS interface */
-#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
-#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
-#define FTDI_MHAM_IC_PID 0xEEEC		/* USB-IC interface */
-#define FTDI_MHAM_DB9_PID 0xEEED	/* USB-DB9 interface */
-#define FTDI_MHAM_RS232_PID 0xEEEE	/* USB-RS232 interface */
-#define FTDI_MHAM_Y9_PID 0xEEEF		/* USB-Y9 interface */
+#define FTDI_MHAM_KW_PID	0xEEE8	/* USB-KW interface */
+#define FTDI_MHAM_YS_PID	0xEEE9	/* USB-YS interface */
+#define FTDI_MHAM_Y6_PID	0xEEEA	/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID	0xEEEB	/* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID	0xEEEC	/* USB-IC interface */
+#define FTDI_MHAM_DB9_PID	0xEEED	/* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID	0xEEEE	/* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID	0xEEEF	/* USB-Y9 interface */
 
 /* Domintell products  http://www.domintell.com */
 #define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
@@ -483,9 +483,9 @@
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
  */
-#define ADI_VID 		0x0456
-#define ADI_GNICE_PID 		0xF000
-#define ADI_GNICEPLUS_PID 	0xF001
+#define ADI_VID			0x0456
+#define ADI_GNICE_PID		0xF000
+#define ADI_GNICEPLUS_PID	0xF001
 
 /*
  * RATOC REX-USB60F
@@ -611,13 +611,13 @@
 #define SEALEVEL_2802_7_PID	0X2872	/* SeaLINK+8/485 (2802) Port 7 */
 #define SEALEVEL_2802_8_PID	0X2882	/* SeaLINK+8/485 (2802) Port 8 */
 #define SEALEVEL_2803_1_PID	0X2813	/* SeaLINK+8 (2803) Port 1 */
-#define SEALEVEL_2803_2_PID	0X2823 	/* SeaLINK+8 (2803) Port 2 */
-#define SEALEVEL_2803_3_PID	0X2833 	/* SeaLINK+8 (2803) Port 3 */
-#define SEALEVEL_2803_4_PID	0X2843 	/* SeaLINK+8 (2803) Port 4 */
-#define SEALEVEL_2803_5_PID	0X2853 	/* SeaLINK+8 (2803) Port 5 */
-#define SEALEVEL_2803_6_PID	0X2863 	/* SeaLINK+8 (2803) Port 6 */
-#define SEALEVEL_2803_7_PID	0X2873 	/* SeaLINK+8 (2803) Port 7 */
-#define SEALEVEL_2803_8_PID	0X2883 	/* SeaLINK+8 (2803) Port 8 */
+#define SEALEVEL_2803_2_PID	0X2823	/* SeaLINK+8 (2803) Port 2 */
+#define SEALEVEL_2803_3_PID	0X2833	/* SeaLINK+8 (2803) Port 3 */
+#define SEALEVEL_2803_4_PID	0X2843	/* SeaLINK+8 (2803) Port 4 */
+#define SEALEVEL_2803_5_PID	0X2853	/* SeaLINK+8 (2803) Port 5 */
+#define SEALEVEL_2803_6_PID	0X2863	/* SeaLINK+8 (2803) Port 6 */
+#define SEALEVEL_2803_7_PID	0X2873	/* SeaLINK+8 (2803) Port 7 */
+#define SEALEVEL_2803_8_PID	0X2883	/* SeaLINK+8 (2803) Port 8 */
 
 /*
  * JETI SPECTROMETER SPECBOS 1201
@@ -1013,7 +1013,7 @@
  */
 #define EVOLUTION_VID		0xDEEE	/* Vendor ID */
 #define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
-#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_8U232AM_PID		0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
 #define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
 #define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
 
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index f804acb138e..a817ced8283 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -1,6 +1,7 @@
 /*
  * USB Serial Converter Generic functions
  *
+ * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  *
  *	This program is free software; you can redistribute it and/or
@@ -12,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/sysrq.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
@@ -117,7 +119,6 @@ void usb_serial_generic_deregister(void)
 
 int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
 	int result = 0;
 	unsigned long flags;
 
@@ -130,23 +131,8 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* if we have a bulk endpoint, start reading from it */
-	if (port->bulk_in_size) {
-		/* Start reading from the device */
-		usb_fill_bulk_urb(port->read_urb, serial->dev,
-				   usb_rcvbulkpipe(serial->dev,
-						port->bulk_in_endpointAddress),
-				   port->read_urb->transfer_buffer,
-				   port->read_urb->transfer_buffer_length,
-				   ((serial->type->read_bulk_callback) ?
-				     serial->type->read_bulk_callback :
-				     usb_serial_generic_read_bulk_callback),
-				   port);
-		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev,
-			    "%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-	}
+	if (port->bulk_in_size)
+		result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 
 	return result;
 }
@@ -155,13 +141,22 @@ EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 static void generic_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
+	unsigned long flags;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	if (serial->dev) {
 		/* shutdown any bulk transfers that might be going on */
-		if (port->bulk_out_size)
+		if (port->bulk_out_size) {
 			usb_kill_urb(port->write_urb);
+			for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+				usb_kill_urb(port->write_urbs[i]);
+
+			spin_lock_irqsave(&port->lock, flags);
+			kfifo_reset_out(&port->write_fifo);
+			spin_unlock_irqrestore(&port->lock, flags);
+		}
 		if (port->bulk_in_size)
 			usb_kill_urb(port->read_urb);
 	}
@@ -172,146 +167,68 @@ void usb_serial_generic_close(struct usb_serial_port *port)
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup(port);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_close);
 
-static int usb_serial_multi_urb_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count)
+int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	unsigned long flags;
-	struct urb *urb;
-	unsigned char *buffer;
-	int status;
-	int towrite;
-	int bwrite = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (count == 0)
-		dbg("%s - write request of 0 bytes", __func__);
-
-	while (count > 0) {
-		towrite = (count > port->bulk_out_size) ?
-			port->bulk_out_size : count;
-		spin_lock_irqsave(&port->lock, flags);
-		if (port->urbs_in_flight >
-		    port->serial->type->max_in_flight_urbs) {
-			spin_unlock_irqrestore(&port->lock, flags);
-			dbg("%s - write limit hit", __func__);
-			return bwrite;
-		}
-		port->tx_bytes_flight += towrite;
-		port->urbs_in_flight++;
-		spin_unlock_irqrestore(&port->lock, flags);
-
-		buffer = kmalloc(towrite, GFP_ATOMIC);
-		if (!buffer) {
-			dev_err(&port->dev,
-			"%s ran out of kernel memory for urb ...\n", __func__);
-			goto error_no_buffer;
-		}
-
-		urb = usb_alloc_urb(0, GFP_ATOMIC);
-		if (!urb) {
-			dev_err(&port->dev, "%s - no more free urbs\n",
-				__func__);
-			goto error_no_urb;
-		}
-
-		/* Copy data */
-		memcpy(buffer, buf + bwrite, towrite);
-		usb_serial_debug_data(debug, &port->dev, __func__,
-				      towrite, buffer);
-		/* fill the buffer and send it */
-		usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_sndbulkpipe(port->serial->dev,
-					port->bulk_out_endpointAddress),
-			buffer, towrite,
-			usb_serial_generic_write_bulk_callback, port);
-
-		status = usb_submit_urb(urb, GFP_ATOMIC);
-		if (status) {
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, status);
-			goto error;
-		}
-
-		/* This urb is the responsibility of the host driver now */
-		usb_free_urb(urb);
-		dbg("%s write: %d", __func__, towrite);
-		count -= towrite;
-		bwrite += towrite;
-	}
-	return bwrite;
-
-error:
-	usb_free_urb(urb);
-error_no_urb:
-	kfree(buffer);
-error_no_buffer:
-	spin_lock_irqsave(&port->lock, flags);
-	port->urbs_in_flight--;
-	port->tx_bytes_flight -= towrite;
-	spin_unlock_irqrestore(&port->lock, flags);
-	return bwrite;
+	return kfifo_out_locked(&port->write_fifo, dest, size, &port->lock);
 }
 
 /**
  * usb_serial_generic_write_start - kick off an URB write
  * @port:	Pointer to the &struct usb_serial_port data
  *
- * Returns the number of bytes queued on success. This will be zero if there
- * was nothing to send. Otherwise, it returns a negative errno value
+ * Returns zero on success, or a negative errno value
  */
 static int usb_serial_generic_write_start(struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
-	unsigned char *data;
-	int result;
-	int count;
+	struct urb *urb;
+	int count, result;
 	unsigned long flags;
-	bool start_io;
+	int i;
 
-	/* Atomically determine whether we can and need to start a USB
-	 * operation. */
+	if (test_and_set_bit_lock(USB_SERIAL_WRITE_BUSY, &port->flags))
+		return 0;
+retry:
 	spin_lock_irqsave(&port->lock, flags);
-	if (port->write_urb_busy)
-		start_io = false;
-	else {
-		start_io = (kfifo_len(&port->write_fifo) != 0);
-		port->write_urb_busy = start_io;
+	if (!port->write_urbs_free || !kfifo_len(&port->write_fifo)) {
+		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+		spin_unlock_irqrestore(&port->lock, flags);
+		return 0;
 	}
+	i = (int)find_first_bit(&port->write_urbs_free,
+						ARRAY_SIZE(port->write_urbs));
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (!start_io)
-		return 0;
-
-	data = port->write_urb->transfer_buffer;
-	count = kfifo_out_locked(&port->write_fifo, data, port->bulk_out_size, &port->lock);
-	usb_serial_debug_data(debug, &port->dev, __func__, count, data);
-
-	/* set up our urb */
-	usb_fill_bulk_urb(port->write_urb, serial->dev,
-			   usb_sndbulkpipe(serial->dev,
-				port->bulk_out_endpointAddress),
-			   port->write_urb->transfer_buffer, count,
-			   ((serial->type->write_bulk_callback) ?
-			     serial->type->write_bulk_callback :
-			     usb_serial_generic_write_bulk_callback),
-			   port);
-
-	/* send the data out the bulk port */
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	urb = port->write_urbs[i];
+	count = port->serial->type->prepare_write_buffer(port,
+						urb->transfer_buffer,
+						port->bulk_out_size);
+	urb->transfer_buffer_length = count;
+	usb_serial_debug_data(debug, &port->dev, __func__, count,
+						urb->transfer_buffer);
+	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
+		dev_err(&port->dev, "%s - error submitting urb: %d\n",
 						__func__, result);
-		/* don't have to grab the lock here, as we will
-		   retry if != 0 */
-		port->write_urb_busy = 0;
-	} else
-		result = count;
+		clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+		return result;
+	}
+	clear_bit(i, &port->write_urbs_free);
 
-	return result;
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes += count;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Try sending off another urb, unless in irq context (in which case
+	 * there will be no free urb). */
+	if (!in_irq())
+		goto retry;
+
+	clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags);
+
+	return 0;
 }
 
 /**
@@ -328,7 +245,6 @@ static int usb_serial_generic_write_start(struct usb_serial_port *port)
 int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
-	struct usb_serial *serial = port->serial;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -337,31 +253,23 @@ int usb_serial_generic_write(struct tty_struct *tty,
 	if (!port->bulk_out_size)
 		return -ENODEV;
 
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
+	if (!count)
 		return 0;
-	}
-
-	if (serial->type->max_in_flight_urbs)
-		return usb_serial_multi_urb_write(tty, port,
-						  buf, count);
 
 	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 	result = usb_serial_generic_write_start(port);
+	if (result)
+		return result;
 
-	if (result >= 0)
-		result = count;
-
-	return result;
+	return count;
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write);
 
 int usb_serial_generic_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
 	unsigned long flags;
-	int room = 0;
+	int room;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -369,14 +277,7 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&port->lock, flags);
-	if (serial->type->max_in_flight_urbs) {
-		if (port->urbs_in_flight < serial->type->max_in_flight_urbs)
-			room = port->bulk_out_size *
-				(serial->type->max_in_flight_urbs -
-				 port->urbs_in_flight);
-	} else {
-		room = kfifo_avail(&port->write_fifo);
-	}
+	room = kfifo_avail(&port->write_fifo);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -386,7 +287,6 @@ int usb_serial_generic_write_room(struct tty_struct *tty)
 int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct usb_serial *serial = port->serial;
 	unsigned long flags;
 	int chars;
 
@@ -396,61 +296,47 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&port->lock, flags);
-	if (serial->type->max_in_flight_urbs)
-		chars = port->tx_bytes_flight;
-	else
-		chars = kfifo_len(&port->write_fifo);
+	chars = kfifo_len(&port->write_fifo) + port->tx_bytes;
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
 }
 
-
-void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
-			gfp_t mem_flags)
+int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
+					gfp_t mem_flags)
 {
-	struct urb *urb = port->read_urb;
-	struct usb_serial *serial = port->serial;
 	int result;
 
-	/* Continue reading from device */
-	usb_fill_bulk_urb(urb, serial->dev,
-			   usb_rcvbulkpipe(serial->dev,
-					port->bulk_in_endpointAddress),
-			   urb->transfer_buffer,
-			   urb->transfer_buffer_length,
-			   ((serial->type->read_bulk_callback) ?
-			     serial->type->read_bulk_callback :
-			     usb_serial_generic_read_bulk_callback), port);
-
-	result = usb_submit_urb(urb, mem_flags);
+	result = usb_submit_urb(port->read_urb, mem_flags);
 	if (result && result != -EPERM) {
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
+		dev_err(&port->dev, "%s - error submitting urb: %d\n",
 							__func__, result);
 	}
+	return result;
 }
-EXPORT_SYMBOL_GPL(usb_serial_generic_resubmit_read_urb);
+EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urb);
 
-/* Push data to tty layer and resubmit the bulk read URB */
-static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
+void usb_serial_generic_process_read_urb(struct urb *urb)
 {
-	struct urb *urb = port->read_urb;
-	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	struct usb_serial_port *port = urb->context;
+	struct tty_struct *tty;
 	char *ch = (char *)urb->transfer_buffer;
 	int i;
 
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
 	if (!tty)
-		goto done;
+		return;
 
 	/* The per character mucking around with sysrq path it too slow for
 	   stuff like 3G modems, so shortcircuit it in the 99.9999999% of cases
 	   where the USB serial is not a console anyway */
-	if (!port->console || !port->sysrq)
+	if (!port->port.console || !port->sysrq)
 		tty_insert_flip_string(tty, ch, urb->actual_length);
 	else {
-		/* Push data to tty */
 		for (i = 0; i < urb->actual_length; i++, ch++) {
 			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
 				tty_insert_flip_char(tty, *ch, TTY_NORMAL);
@@ -458,9 +344,8 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 	}
 	tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
-done:
-	usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_process_read_urb);
 
 void usb_serial_generic_read_bulk_callback(struct urb *urb)
 {
@@ -479,13 +364,14 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
+	port->serial->type->process_read_urb(urb);
 
 	/* Throttle the device if requested by tty */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = port->throttle_req;
 	if (!port->throttled) {
 		spin_unlock_irqrestore(&port->lock, flags);
-		flush_and_resubmit_read_urb(port);
+		usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
 	} else
 		spin_unlock_irqrestore(&port->lock, flags);
 }
@@ -496,30 +382,29 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb)
 	unsigned long flags;
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->serial->type->max_in_flight_urbs) {
-		kfree(urb->transfer_buffer);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		if (port->write_urbs[i] == urb)
+			break;
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->tx_bytes -= urb->transfer_buffer_length;
+	set_bit(i, &port->write_urbs_free);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (status) {
+		dbg("%s - non-zero urb status: %d", __func__, status);
 
 		spin_lock_irqsave(&port->lock, flags);
-		--port->urbs_in_flight;
-		port->tx_bytes_flight -= urb->transfer_buffer_length;
-		if (port->urbs_in_flight < 0)
-			port->urbs_in_flight = 0;
+		kfifo_reset_out(&port->write_fifo);
 		spin_unlock_irqrestore(&port->lock, flags);
 	} else {
-		port->write_urb_busy = 0;
-
-		if (status)
-			kfifo_reset_out(&port->write_fifo);
-		else
-			usb_serial_generic_write_start(port);
+		usb_serial_generic_write_start(port);
 	}
 
-	if (status)
-		dbg("%s - non-zero urb status: %d", __func__, status);
-
 	usb_serial_port_softint(port);
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
@@ -537,31 +422,31 @@ void usb_serial_generic_throttle(struct tty_struct *tty)
 	port->throttle_req = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_throttle);
 
 void usb_serial_generic_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	int was_throttled;
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Clear the throttle flags */
-	spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irq(&port->lock);
 	was_throttled = port->throttled;
 	port->throttled = port->throttle_req = 0;
-	spin_unlock_irqrestore(&port->lock, flags);
+	spin_unlock_irq(&port->lock);
 
-	if (was_throttled) {
-		/* Resume reading from device */
-		flush_and_resubmit_read_urb(port);
-	}
+	if (was_throttled)
+		usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle);
 
+#ifdef CONFIG_MAGIC_SYSRQ
 int usb_serial_handle_sysrq_char(struct tty_struct *tty,
 			struct usb_serial_port *port, unsigned int ch)
 {
-	if (port->sysrq && port->console) {
+	if (port->sysrq && port->port.console) {
 		if (ch && time_before(jiffies, port->sysrq)) {
 			handle_sysrq(ch, tty);
 			port->sysrq = 0;
@@ -571,6 +456,13 @@ int usb_serial_handle_sysrq_char(struct tty_struct *tty,
 	}
 	return 0;
 }
+#else
+int usb_serial_handle_sysrq_char(struct tty_struct *tty,
+			struct usb_serial_port *port, unsigned int ch)
+{
+	return 0;
+}
+#endif
 EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char);
 
 int usb_serial_handle_break(struct usb_serial_port *port)
@@ -600,7 +492,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 				c++;
 		}
 
-		if (port->write_urb) {
+		if (port->bulk_out_size) {
 			r = usb_serial_generic_write_start(port);
 			if (r < 0)
 				c++;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 3ef8df0ef88..76e6fb3aab7 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3020,7 +3020,7 @@ static int edge_startup(struct usb_serial *serial)
 
 	/* set up our port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
-		edge_port = kmalloc(sizeof(struct edgeport_port), GFP_KERNEL);
+		edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
 		if (edge_port == NULL) {
 			dev_err(&serial->dev->dev, "%s - Out of memory\n",
 								   __func__);
@@ -3033,7 +3033,6 @@ static int edge_startup(struct usb_serial *serial)
 			kfree(edge_serial);
 			return -ENOMEM;
 		}
-		memset(edge_port, 0, sizeof(struct edgeport_port));
 		spin_lock_init(&edge_port->ep_lock);
 		edge_port->port = serial->port[i];
 		usb_set_serial_port_data(serial->port[i], edge_port);
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index cb201c1f67f..dced7ec6547 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -34,15 +34,15 @@
 
 
 
-/* The following table is used to map the USBx port number to 
+/* The following table is used to map the USBx port number to
  * the device serial number (or physical USB path), */
 #define MAX_EDGEPORTS	64
 
 struct comMapper {
 	char	SerialNumber[MAX_SERIALNUMBER_LEN+1];	/* Serial number/usb path */
-	int	numPorts;			       	/* Number of ports */
-	int	Original[MAX_RS232_PORTS];	       	/* Port numbers set by IOCTL */
-	int	Port[MAX_RS232_PORTS];		       	/* Actual used port numbers */
+	int	numPorts;				/* Number of ports */
+	int	Original[MAX_RS232_PORTS];		/* Port numbers set by IOCTL */
+	int	Port[MAX_RS232_PORTS];			/* Actual used port numbers */
 };
 
 
@@ -51,7 +51,7 @@ struct comMapper {
 /* /proc/edgeport Interface
  * This interface uses read/write/lseek interface to talk to the edgeport driver
  * the following read functions are supported: */
-#define PROC_GET_MAPPING_TO_PATH 	1
+#define PROC_GET_MAPPING_TO_PATH	1
 #define PROC_GET_COM_ENTRY		2
 #define PROC_GET_EDGE_MANUF_DESCRIPTOR	3
 #define PROC_GET_BOOT_DESCRIPTOR	4
@@ -64,7 +64,7 @@ struct comMapper {
 
 
 /* the following write functions are supported: */
-#define PROC_SET_COM_MAPPING 		1
+#define PROC_SET_COM_MAPPING		1
 #define PROC_SET_COM_ENTRY		2
 
 
@@ -97,8 +97,8 @@ struct edgeport_product_info {
 	__u8	BoardRev;			/* PCB revision level (chg only if s/w visible) */
 
 	__u8	BootMajorVersion;		/* Boot Firmware version: xx. */
-	__u8	BootMinorVersion;		/*	   		  yy. */
-	__le16	BootBuildNumber;		/*		      	  zzzz (LE format) */
+	__u8	BootMinorVersion;		/*			  yy. */
+	__le16	BootBuildNumber;		/*			  zzzz (LE format) */
 
 	__u8	FirmwareMajorVersion;		/* Operational Firmware version:xx. */
 	__u8	FirmwareMinorVersion;		/*				yy. */
diff --git a/drivers/usb/serial/io_ionsp.h b/drivers/usb/serial/io_ionsp.h
index 092e03d2dfc..5cc591bae54 100644
--- a/drivers/usb/serial/io_ionsp.h
+++ b/drivers/usb/serial/io_ionsp.h
@@ -89,10 +89,10 @@ All 16-bit fields are sent in little-endian (Intel) format.
 //
 
 struct int_status_pkt {
-	__u16      RxBytesAvail;		    // Additional bytes available to
-						    // be read from Bulk IN pipe
-	__u16      TxCredits[ MAX_RS232_PORTS ];   // Additional space available in
-						    // given port's TxBuffer
+	__u16 RxBytesAvail;			// Additional bytes available to
+						// be read from Bulk IN pipe
+	__u16 TxCredits[MAX_RS232_PORTS];	// Additional space available in
+						// given port's TxBuffer
 };
 
 
@@ -115,24 +115,24 @@ struct int_status_pkt {
 #define	IOSP_CMD_STAT_BIT		0x80		// If set, this is command/status header
 
 #define IS_CMD_STAT_HDR(Byte1)		((Byte1) & IOSP_CMD_STAT_BIT)
-#define IS_DATA_HDR(Byte1)		(! IS_CMD_STAT_HDR(Byte1))
+#define IS_DATA_HDR(Byte1)		(!IS_CMD_STAT_HDR(Byte1))
 
 #define	IOSP_GET_HDR_PORT(Byte1)		((__u8) ((Byte1) & IOSP_PORT_MASK))
-#define	IOSP_GET_HDR_DATA_LEN(Byte1, Byte2)	((__u16) ( ((__u16)((Byte1) & 0x78)) << 5) | (Byte2))
+#define	IOSP_GET_HDR_DATA_LEN(Byte1, Byte2)	((__u16) (((__u16)((Byte1) & 0x78)) << 5) | (Byte2))
 #define	IOSP_GET_STATUS_CODE(Byte1)		((__u8) (((Byte1) &  0x78) >> 3))
 
 
 //
 // These macros build the 1st and 2nd bytes for a data header
 //
-#define	IOSP_BUILD_DATA_HDR1(Port, Len)		((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78 ))))
+#define	IOSP_BUILD_DATA_HDR1(Port, Len)		((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78))))
 #define	IOSP_BUILD_DATA_HDR2(Port, Len)		((__u8) (Len))
 
 
 //
 // These macros build the 1st and 2nd bytes for a command header
 //
-#define	IOSP_BUILD_CMD_HDR1(Port, Cmd)		((__u8) ( IOSP_CMD_STAT_BIT | (Port) |	((__u8) ((Cmd) << 3)) ))
+#define	IOSP_BUILD_CMD_HDR1(Port, Cmd)		((__u8) (IOSP_CMD_STAT_BIT | (Port) | ((__u8) ((Cmd) << 3))))
 
 
 //--------------------------------------------------------------
@@ -194,24 +194,25 @@ struct int_status_pkt {
 // Define macros to simplify building of IOSP cmds
 //
 
-#define	MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val)						\
-	do {											\
-		(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_WRITE_UART_REG(Reg) );	\
-		(*(ppBuf))[1] = (Val);								\
-												\
-		*ppBuf += 2;									\
-		*pLen  += 2;									\
-	} while (0)
+#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val)			\
+do {									\
+	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port),			\
+					    IOSP_WRITE_UART_REG(Reg));	\
+	(*(ppBuf))[1] = (Val);						\
+									\
+	*ppBuf += 2;							\
+	*pLen  += 2;							\
+} while (0)
 
-#define	MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param)					\
-	do {											\
-		(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_EXT_CMD );			\
-		(*(ppBuf))[1] = (ExtCmd);							\
-		(*(ppBuf))[2] = (Param);							\
-												\
-		*ppBuf += 3;									\
-		*pLen  += 3;									\
-	} while (0)
+#define MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param)		\
+do {									\
+	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), IOSP_EXT_CMD);	\
+	(*(ppBuf))[1] = (ExtCmd);					\
+	(*(ppBuf))[2] = (Param);					\
+									\
+	*ppBuf += 3;							\
+	*pLen  += 3;							\
+} while (0)
 
 
 
@@ -310,16 +311,16 @@ struct int_status_pkt {
 //
 //	IOSP_CMD_RX_CHECK_REQ
 //
-//  This command is used to assist in the implementation of the 
-//  IOCTL_SERIAL_PURGE Windows IOCTL.  
-//  This IOSP command tries to place a marker at the end of the RX 
-//  queue in the Edgeport. If the Edgeport RX queue is full then 
-//  the Check will be discarded.  
-//  It is up to the device driver to timeout waiting for the 
-//  RX_CHECK_RSP.  If a RX_CHECK_RSP is received, the driver is 
-//	sure that all data has been received from the edgeport and 
+//  This command is used to assist in the implementation of the
+//  IOCTL_SERIAL_PURGE Windows IOCTL.
+//  This IOSP command tries to place a marker at the end of the RX
+//  queue in the Edgeport. If the Edgeport RX queue is full then
+//  the Check will be discarded.
+//  It is up to the device driver to timeout waiting for the
+//  RX_CHECK_RSP.  If a RX_CHECK_RSP is received, the driver is
+//	sure that all data has been received from the edgeport and
 //	may now purge any internal RX buffers.
-//  Note tat the sequence numbers may be used to detect lost 
+//  Note tat the sequence numbers may be used to detect lost
 //  CHECK_REQs.
 
 //  Example for Port 0
@@ -341,7 +342,7 @@ struct int_status_pkt {
 //
 //	1ssssPPP P1P1P1P1 [ P2P2P2P2P2 ]...
 //
-// 	ssss:	00-07	2-byte status.	ssss identifies which UART register
+//	ssss:	00-07	2-byte status.	ssss identifies which UART register
 //					has changed value, and the new value is in P1.
 //					Note that the ssss values do not correspond to the
 //					16554 register numbers given in 16554.H. Instead,
@@ -383,14 +384,14 @@ struct int_status_pkt {
 // returns this in order to report
 // changes in modem status lines
 // (CTS, DSR, RI, CD)
-// 
+//
 
 //					0x02	// Available for future expansion
-//					0x03	// 
-//					0x04	// 
-//					0x05	// 
-//					0x06	// 
-//					0x07	// 
+//					0x03	//
+//					0x04	//
+//					0x05	//
+//					0x06	//
+//					0x07	//
 
 
 /****************************************************
@@ -400,7 +401,7 @@ struct int_status_pkt {
 #define	IOSP_STATUS_LSR_DATA		0x08	// P1 is new value of LSR register (same as STATUS_LSR)
 
 // P2 is errored character read from
-//    RxFIFO after LSR reported an error.													
+//    RxFIFO after LSR reported an error.
 
 #define	IOSP_EXT_STATUS			0x09	// P1 is status/response code, param in P2.
 
@@ -408,7 +409,7 @@ struct int_status_pkt {
 // Response Codes (P1 values) for 3-byte status messages
 
 #define	IOSP_EXT_STATUS_CHASE_RSP	0	// Reply to CHASE_PORT cmd. P2 is outcome:
-#define	IOSP_EXT_STATUS_CHASE_PASS	0	// 	P2 = 0: All Tx data drained successfully
+#define	IOSP_EXT_STATUS_CHASE_PASS	0	//	P2 = 0: All Tx data drained successfully
 #define	IOSP_EXT_STATUS_CHASE_FAIL	1	//	P2 = 1: Timed out (stuck due to flow
 
 //			control from remote device).
@@ -446,9 +447,9 @@ struct int_status_pkt {
 // Macros to parse status messages
 //
 
-#define	IOSP_GET_STATUS_LEN(code)	( (code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4) )
+#define	IOSP_GET_STATUS_LEN(code)	((code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4))
 
-#define	IOSP_STATUS_IS_2BYTE(code)	( (code) < 0x08 )
-#define	IOSP_STATUS_IS_3BYTE(code)	( ((code) >= 0x08) && ((code) <= 0x0B) )
-#define	IOSP_STATUS_IS_4BYTE(code)	( ((code) >= 0x0C) && ((code) <= 0x0D) )
+#define	IOSP_STATUS_IS_2BYTE(code)	((code) < 0x08)
+#define	IOSP_STATUS_IS_3BYTE(code)	(((code) >= 0x08) && ((code) <= 0x0B))
+#define	IOSP_STATUS_IS_4BYTE(code)	(((code) >= 0x0C) && ((code) <= 0x0D))
 
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index aa876f71f22..0fca2659206 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -36,6 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/serial.h>
+#include <linux/kfifo.h>
 #include <linux/ioctl.h>
 #include <linux/firmware.h>
 #include <linux/uaccess.h>
@@ -56,10 +57,6 @@
 #define EPROM_PAGE_SIZE		64
 
 
-struct edgeport_uart_buf_desc {
-	__u32 count;		/* Number of bytes currently in buffer */
-};
-
 /* different hardware types */
 #define HARDWARE_TYPE_930	0
 #define HARDWARE_TYPE_TIUMP	1
@@ -87,14 +84,6 @@ struct product_info {
 	__u8	hardware_type;		/* Type of hardware */
 } __attribute__((packed));
 
-/* circular buffer */
-struct edge_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 struct edgeport_port {
 	__u16 uart_base;
 	__u16 dma_address;
@@ -108,7 +97,6 @@ struct edgeport_port {
 	int baud_rate;
 	int close_pending;
 	int lsr_event;
-	struct edgeport_uart_buf_desc tx;
 	struct async_icount	icount;
 	wait_queue_head_t	delta_msr_wait;	/* for handling sleeping while
 						   waiting for msr change to
@@ -119,7 +107,7 @@ struct edgeport_port {
 	spinlock_t ep_lock;
 	int ep_read_urb_state;
 	int ep_write_urb_in_use;
-	struct edge_buf *ep_out_buf;
+	struct kfifo write_fifo;
 };
 
 struct edgeport_serial {
@@ -249,17 +237,6 @@ static void edge_send(struct tty_struct *tty);
 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
 static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
 
-/* circular buffer */
-static struct edge_buf *edge_buf_alloc(unsigned int size);
-static void edge_buf_free(struct edge_buf *eb);
-static void edge_buf_clear(struct edge_buf *eb);
-static unsigned int edge_buf_data_avail(struct edge_buf *eb);
-static unsigned int edge_buf_space_avail(struct edge_buf *eb);
-static unsigned int edge_buf_put(struct edge_buf *eb, const char *buf,
-	unsigned int count);
-static unsigned int edge_buf_get(struct edge_buf *eb, char *buf,
-	unsigned int count);
-
 
 static int ti_vread_sync(struct usb_device *dev, __u8 request,
 				__u16 value, __u16 index, u8 *data, int size)
@@ -590,7 +567,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (edge_buf_data_avail(port->ep_out_buf) == 0
+		if (kfifo_len(&port->write_fifo) == 0
 		|| timeout == 0 || signal_pending(current)
 		|| !usb_get_intfdata(port->port->serial->interface))
 			/* disconnect */
@@ -602,7 +579,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&tty->write_wait, &wait);
 	if (flush)
-		edge_buf_clear(port->ep_out_buf);
+		kfifo_reset_out(&port->write_fifo);
 	spin_unlock_irqrestore(&port->ep_lock, flags);
 	tty_kref_put(tty);
 
@@ -2089,7 +2066,6 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 				const unsigned char *data, int count)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -2103,10 +2079,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (edge_port->close_pending == 1)
 		return -ENODEV;
 
-	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	count = edge_buf_put(edge_port->ep_out_buf, data, count);
-	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
-
+	count = kfifo_in_locked(&edge_port->write_fifo, data, count,
+							&edge_port->ep_lock);
 	edge_send(tty);
 
 	return count;
@@ -2129,7 +2103,7 @@ static void edge_send(struct tty_struct *tty)
 		return;
 	}
 
-	count = edge_buf_get(edge_port->ep_out_buf,
+	count = kfifo_out(&edge_port->write_fifo,
 				port->write_urb->transfer_buffer,
 				port->bulk_out_size);
 
@@ -2185,7 +2159,7 @@ static int edge_write_room(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	room = edge_buf_space_avail(edge_port->ep_out_buf);
+	room = kfifo_avail(&edge_port->write_fifo);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -2207,7 +2181,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
-	chars = edge_buf_data_avail(edge_port->ep_out_buf);
+	chars = kfifo_len(&edge_port->write_fifo);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
@@ -2664,8 +2638,8 @@ static int edge_startup(struct usb_serial *serial)
 			goto cleanup;
 		}
 		spin_lock_init(&edge_port->ep_lock);
-		edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE);
-		if (edge_port->ep_out_buf == NULL) {
+		if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE,
+								GFP_KERNEL)) {
 			dev_err(&serial->dev->dev, "%s - Out of memory\n",
 								__func__);
 			kfree(edge_port);
@@ -2682,7 +2656,7 @@ static int edge_startup(struct usb_serial *serial)
 cleanup:
 	for (--i; i >= 0; --i) {
 		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_buf_free(edge_port->ep_out_buf);
+		kfifo_free(&edge_port->write_fifo);
 		kfree(edge_port);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -2713,7 +2687,7 @@ static void edge_release(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		edge_port = usb_get_serial_port_data(serial->port[i]);
-		edge_buf_free(edge_port->ep_out_buf);
+		kfifo_free(&edge_port->write_fifo);
 		kfree(edge_port);
 	}
 	kfree(usb_get_serial_data(serial));
@@ -2763,182 +2737,6 @@ static int edge_remove_sysfs_attrs(struct usb_serial_port *port)
 }
 
 
-/* Circular Buffer */
-
-/*
- * edge_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct edge_buf *edge_buf_alloc(unsigned int size)
-{
-	struct edge_buf *eb;
-
-
-	if (size == 0)
-		return NULL;
-
-	eb = kmalloc(sizeof(struct edge_buf), GFP_KERNEL);
-	if (eb == NULL)
-		return NULL;
-
-	eb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (eb->buf_buf == NULL) {
-		kfree(eb);
-		return NULL;
-	}
-
-	eb->buf_size = size;
-	eb->buf_get = eb->buf_put = eb->buf_buf;
-
-	return eb;
-}
-
-
-/*
- * edge_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void edge_buf_free(struct edge_buf *eb)
-{
-	if (eb) {
-		kfree(eb->buf_buf);
-		kfree(eb);
-	}
-}
-
-
-/*
- * edge_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void edge_buf_clear(struct edge_buf *eb)
-{
-	if (eb != NULL)
-		eb->buf_get = eb->buf_put;
-	/* equivalent to a get of all data available */
-}
-
-
-/*
- * edge_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static unsigned int edge_buf_data_avail(struct edge_buf *eb)
-{
-	if (eb == NULL)
-		return 0;
-	return ((eb->buf_size + eb->buf_put - eb->buf_get) % eb->buf_size);
-}
-
-
-/*
- * edge_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static unsigned int edge_buf_space_avail(struct edge_buf *eb)
-{
-	if (eb == NULL)
-		return 0;
-	return ((eb->buf_size + eb->buf_get - eb->buf_put - 1) % eb->buf_size);
-}
-
-
-/*
- * edge_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int edge_buf_put(struct edge_buf *eb, const char *buf,
-	unsigned int count)
-{
-	unsigned int len;
-
-
-	if (eb == NULL)
-		return 0;
-
-	len  = edge_buf_space_avail(eb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = eb->buf_buf + eb->buf_size - eb->buf_put;
-	if (count > len) {
-		memcpy(eb->buf_put, buf, len);
-		memcpy(eb->buf_buf, buf+len, count - len);
-		eb->buf_put = eb->buf_buf + count - len;
-	} else {
-		memcpy(eb->buf_put, buf, count);
-		if (count < len)
-			eb->buf_put += count;
-		else /* count == len */
-			eb->buf_put = eb->buf_buf;
-	}
-
-	return count;
-}
-
-
-/*
- * edge_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static unsigned int edge_buf_get(struct edge_buf *eb, char *buf,
-	unsigned int count)
-{
-	unsigned int len;
-
-
-	if (eb == NULL)
-		return 0;
-
-	len = edge_buf_data_avail(eb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = eb->buf_buf + eb->buf_size - eb->buf_get;
-	if (count > len) {
-		memcpy(buf, eb->buf_get, len);
-		memcpy(buf+len, eb->buf_buf, count - len);
-		eb->buf_get = eb->buf_buf + count - len;
-	} else {
-		memcpy(buf, eb->buf_get, count);
-		if (count < len)
-			eb->buf_get += count;
-		else /* count == len */
-			eb->buf_get = eb->buf_buf;
-	}
-
-	return count;
-}
-
-
 static struct usb_serial_driver edgeport_1port_device = {
 	.driver = {
 		.owner		= THIS_MODULE,
diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h
index cab84f2256b..1bd67b24f91 100644
--- a/drivers/usb/serial/io_ti.h
+++ b/drivers/usb/serial/io_ti.h
@@ -1,4 +1,4 @@
-/*****************************************************************************  
+/*****************************************************************************
  *
  *	Copyright (C) 1997-2002 Inside Out Networks, Inc.
  *
@@ -22,10 +22,10 @@
 #define DTK_ADDR_SPACE_I2C_TYPE_II	0x82	/* Addr is placed in I2C area */
 #define DTK_ADDR_SPACE_I2C_TYPE_III	0x83	/* Addr is placed in I2C area */
 
-// UART Defines
-#define UMPMEM_BASE_UART1		0xFFA0  /* UMP UART1 base address          */
-#define UMPMEM_BASE_UART2		0xFFB0  /* UMP UART2 base address          */
-#define UMPMEM_OFFS_UART_LSR		0x05    /* UMP UART LSR register offset    */
+/* UART Defines */
+#define UMPMEM_BASE_UART1		0xFFA0	/* UMP UART1 base address */
+#define UMPMEM_BASE_UART2		0xFFB0	/* UMP UART2 base address */
+#define UMPMEM_OFFS_UART_LSR		0x05	/* UMP UART LSR register offset */
 
 /* Bits per character */
 #define UMP_UART_CHAR5BITS		0x00
@@ -54,7 +54,7 @@
 #define UMP_UART_LSR_RX_MASK		0x10
 #define UMP_UART_LSR_TX_MASK		0x20
 
-#define UMP_UART_LSR_DATA_MASK		( LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK )
+#define UMP_UART_LSR_DATA_MASK		(LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)
 
 /* Port Settings Constants) */
 #define UMP_MASK_UART_FLAGS_RTS_FLOW		0x0001
@@ -79,50 +79,57 @@
 #define UMP_PORT_DIR_OUT			0x01
 #define UMP_PORT_DIR_IN				0x02
 
-// Address of Port 0
-#define UMPM_UART1_PORT  			0x03
-
-// Commands
-#define	UMPC_SET_CONFIG 		0x05
-#define	UMPC_OPEN_PORT  		0x06
-#define	UMPC_CLOSE_PORT 		0x07
-#define	UMPC_START_PORT 		0x08
-#define	UMPC_STOP_PORT  		0x09
-#define	UMPC_TEST_PORT  		0x0A
-#define	UMPC_PURGE_PORT 		0x0B
-
-#define	UMPC_COMPLETE_READ		0x80	// Force the Firmware to complete the current Read
-#define	UMPC_HARDWARE_RESET		0x81	// Force UMP back into BOOT Mode
-#define	UMPC_COPY_DNLD_TO_I2C		0x82	// Copy current download image to type 0xf2 record in 16k I2C
-						// firmware will change 0xff record to type 2 record when complete
+/* Address of Port 0 */
+#define UMPM_UART1_PORT				0x03
+
+/* Commands */
+#define	UMPC_SET_CONFIG			0x05
+#define	UMPC_OPEN_PORT			0x06
+#define	UMPC_CLOSE_PORT			0x07
+#define	UMPC_START_PORT			0x08
+#define	UMPC_STOP_PORT			0x09
+#define	UMPC_TEST_PORT			0x0A
+#define	UMPC_PURGE_PORT			0x0B
+
+/* Force the Firmware to complete the current Read */
+#define	UMPC_COMPLETE_READ		0x80
+/* Force UMP back into BOOT Mode */
+#define	UMPC_HARDWARE_RESET		0x81
+/*
+ * Copy current download image to type 0xf2 record in 16k I2C
+ * firmware will change 0xff record to type 2 record when complete
+ */
+#define	UMPC_COPY_DNLD_TO_I2C		0x82
 
-	// Special function register commands
-	// wIndex is register address
-	// wValue is MSB/LSB mask/data
-#define	UMPC_WRITE_SFR	  		0x83	// Write SFR Register
+/*
+ * Special function register commands
+ * wIndex is register address
+ * wValue is MSB/LSB mask/data
+ */
+#define	UMPC_WRITE_SFR			0x83	/* Write SFR Register */
 
-	// wIndex is register address
-#define	UMPC_READ_SFR	  		0x84	// Read SRF Register
+/* wIndex is register address */
+#define	UMPC_READ_SFR			0x84	/* Read SRF Register */
 
-	// Set or Clear DTR (wValue bit 0 Set/Clear)		wIndex ModuleID (port)
+/* Set or Clear DTR (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_DTR		0x85
 
-	// Set or Clear RTS (wValue bit 0 Set/Clear)		wIndex ModuleID (port)
+/* Set or Clear RTS (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_RTS		0x86
 
-	// Set or Clear LOOPBACK (wValue bit 0 Set/Clear)	wIndex ModuleID (port)
+/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_LOOPBACK		0x87
 
-	// Set or Clear BREAK (wValue bit 0 Set/Clear)		wIndex ModuleID (port)
+/* Set or Clear BREAK (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */
 #define	UMPC_SET_CLR_BREAK		0x88
 
-	// Read MSR wIndex ModuleID (port)
+/* Read MSR wIndex ModuleID (port) */
 #define	UMPC_READ_MSR			0x89
 
-	/* Toolkit commands */
-	/* Read-write group */
-#define	UMPC_MEMORY_READ   		0x92
-#define	UMPC_MEMORY_WRITE  		0x93
+/* Toolkit commands */
+/* Read-write group */
+#define	UMPC_MEMORY_READ		0x92
+#define	UMPC_MEMORY_WRITE		0x93
 
 /*
  *	UMP DMA Definitions
@@ -130,8 +137,7 @@
 #define UMPD_OEDB1_ADDRESS		0xFF08
 #define UMPD_OEDB2_ADDRESS		0xFF10
 
-struct out_endpoint_desc_block
-{
+struct out_endpoint_desc_block {
 	__u8 Configuration;
 	__u8 XBufAddr;
 	__u8 XByteCount;
@@ -147,8 +153,8 @@ struct out_endpoint_desc_block
  * TYPE DEFINITIONS
  * Structures for Firmware commands
  */
-struct ump_uart_config		/* UART settings                    */
-{
+/* UART settings */
+struct ump_uart_config {
 	__u16 wBaudRate;	/* Baud rate                        */
 	__u16 wFlags;		/* Bitmap mask of flags             */
 	__u8 bDataBits;		/* 5..8 - data bits per character   */
@@ -165,8 +171,8 @@ struct ump_uart_config		/* UART settings                    */
  * TYPE DEFINITIONS
  * Structures for USB interrupts
  */
-struct ump_interrupt			/* Interrupt packet structure       */
-{
+/* Interrupt packet structure */
+struct ump_interrupt {
 	__u8 bICode;			/* Interrupt code (interrupt num)   */
 	__u8 bIInfo;			/* Interrupt information            */
 }  __attribute__((packed));
diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h
index 8e1a491e52a..51f83fbb73b 100644
--- a/drivers/usb/serial/io_usbvend.h
+++ b/drivers/usb/serial/io_usbvend.h
@@ -26,7 +26,7 @@
 
 //
 // Definitions of USB product IDs
-// 
+//
 
 #define	USB_VENDOR_ID_ION	0x1608		// Our VID
 #define	USB_VENDOR_ID_TI	0x0451		// TI VID
@@ -54,7 +54,7 @@
 // Product IDs - assigned to match middle digit of serial number (No longer true)
 
 #define ION_DEVICE_ID_80251_NETCHIP	0x020	// This bit is set in the PID if this edgeport hardware$
-						// is based on the 80251+Netchip.  
+						// is based on the 80251+Netchip.
 
 #define ION_DEVICE_ID_GENERATION_1	0x00	// Value for 930 based edgeports
 #define ION_DEVICE_ID_GENERATION_2	0x01	// Value for 80251+Netchip.
@@ -134,7 +134,7 @@
 #define ION_DEVICE_ID_TI_EDGEPORT_416		0x0212  // Edgeport/416
 #define ION_DEVICE_ID_TI_EDGEPORT_1		0x0215	// Edgeport/1 RS232
 #define ION_DEVICE_ID_TI_EDGEPORT_42		0x0217	// Edgeport/42 4 hub 2 RS232
-#define ION_DEVICE_ID_TI_EDGEPORT_22I  		0x021A	// Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
+#define ION_DEVICE_ID_TI_EDGEPORT_22I		0x021A	// Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232
 #define ION_DEVICE_ID_TI_EDGEPORT_2C		0x021B	// Edgeport/2c RS232
 #define ION_DEVICE_ID_TI_EDGEPORT_221C		0x021C	// Edgeport/221c is a TI based Edgeport/2 with lucent chip and
 							// 2 external hub ports - Large I2C
@@ -142,7 +142,7 @@
 							// 2 external hub ports - Large I2C
 #define ION_DEVICE_ID_TI_EDGEPORT_21C		0x021E	// Edgeport/21c is a TI based Edgeport/2 with lucent chip
 
-// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C) 
+// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C)
 #define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1	0x0240	// Edgeport/1 RS232
 #define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I	0x0241	// Edgeport/1i- RS422 model
 
@@ -176,7 +176,7 @@
 							// Default to /P function
 
 #define ION_DEVICE_ID_PLUS_PWR_HP4CD		0x30C	// 5052 Plus Power HubPort/4CD+ (for Dell)
-#define ION_DEVICE_ID_PLUS_PWR_HP4C		0x30D	// 5052 Plus Power HubPort/4C+ 
+#define ION_DEVICE_ID_PLUS_PWR_HP4C		0x30D	// 5052 Plus Power HubPort/4C+
 #define ION_DEVICE_ID_PLUS_PWR_PCI		0x30E	// 3410 Plus Power PCI Host Controller 4 port
 
 
@@ -217,17 +217,17 @@
 #define ION_DEVICE_ID_MT4X56USB			0x1403	// OEM device
 
 
-#define	GENERATION_ID_FROM_USB_PRODUCT_ID( ProductId )				\
-			( (__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)) )
+#define	GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId)				\
+			((__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)))
 
-#define	MAKE_USB_PRODUCT_ID( OemId, DeviceId )					\
-			( (__u16) (((OemId) << 10) || (DeviceId)) )
+#define	MAKE_USB_PRODUCT_ID(OemId, DeviceId)					\
+			((__u16) (((OemId) << 10) || (DeviceId)))
 
-#define	DEVICE_ID_FROM_USB_PRODUCT_ID( ProductId )				\
-			( (__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)) )
+#define	DEVICE_ID_FROM_USB_PRODUCT_ID(ProductId)				\
+			((__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)))
 
-#define	OEM_ID_FROM_USB_PRODUCT_ID( ProductId )					\
-			( (__u16) (((ProductId) >> 10) & 0x3F) )
+#define	OEM_ID_FROM_USB_PRODUCT_ID(ProductId)					\
+			((__u16) (((ProductId) >> 10) & 0x3F))
 
 //
 // Definitions of parameters for download code. Note that these are
@@ -237,7 +237,7 @@
 
 // TxCredits value below which driver won't bother sending (to prevent too many small writes).
 // Send only if above 25%
-#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max( ((InitialCredit) / 4), (MaxPacketSize) ))
+#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max(((InitialCredit) / 4), (MaxPacketSize)))
 
 #define	EDGE_FW_BULK_MAX_PACKET_SIZE		64	// Max Packet Size for Bulk In Endpoint (EP1)
 #define EDGE_FW_BULK_READ_BUFFER_SIZE		1024	// Size to use for Bulk reads
@@ -263,7 +263,7 @@
 //		wValue = 16-bit address
 //		wIndex = unused (though we could put segment 00: or FF: here)
 //		wLength = # bytes to read/write (max 64)
-//							
+//
 
 #define USB_REQUEST_ION_RESET_DEVICE	0	// Warm reboot Edgeport, retaining USB address
 #define USB_REQUEST_ION_GET_EPIC_DESC	1	// Get Edgeport Compatibility Descriptor
@@ -278,7 +278,7 @@
 #define USB_REQUEST_ION_ENABLE_SUSPEND	9	// Enable/Disable suspend feature
 						// (wValue != 0: Enable; wValue = 0: Disable)
 
-#define USB_REQUEST_ION_SEND_IOSP	10	// Send an IOSP command to the edgeport over the control pipe	
+#define USB_REQUEST_ION_SEND_IOSP	10	// Send an IOSP command to the edgeport over the control pipe
 #define USB_REQUEST_ION_RECV_IOSP	11	// Receive an IOSP command from the edgeport over the control pipe
 
 
@@ -301,8 +301,7 @@
 // this is a "real" Edgeport.
 //
 
-struct edge_compatibility_bits
-{
+struct edge_compatibility_bits {
 	// This __u32 defines which Vendor-specific commands/functionality
 	// the device supports on the default EP0 pipe.
 
@@ -334,24 +333,22 @@ struct edge_compatibility_bits
 	__u32	TrueEdgeport		:  1;	// 0001	Set if device is a 'real' Edgeport
 											// (Used only by driver, NEVER set by an EPiC device)
 	__u32	GenUnused		: 31;	// Available for future expansion, must be 0
-
 };
 
 #define EDGE_COMPATIBILITY_MASK0	0x0001
 #define EDGE_COMPATIBILITY_MASK1	0x3FFF
 #define EDGE_COMPATIBILITY_MASK2	0x0001
 
-struct edge_compatibility_descriptor
-{
+struct edge_compatibility_descriptor {
 	__u8	Length;				// Descriptor Length (per USB spec)
 	__u8	DescType;			// Descriptor Type (per USB spec, =DEVICE type)
 	__u8	EpicVer;			// Version of EPiC spec supported
-											// (Currently must be 1)
+						// (Currently must be 1)
 	__u8	NumPorts;			// Number of serial ports supported
 	__u8	iDownloadFile;			// Index of string containing download code filename
-											// 0=no download, FF=download compiled into driver.
-	__u8	Unused[ 3 ];			// Available for future expansion, must be 0
-											// (Currently must be 0).
+						// 0=no download, FF=download compiled into driver.
+	__u8	Unused[3];			// Available for future expansion, must be 0
+						// (Currently must be 0).
 	__u8	MajorVersion;			// Firmware version: xx.
 	__u8	MinorVersion;			//  yy.
 	__le16	BuildNumber;			//  zzzz (LE format)
@@ -359,9 +356,7 @@ struct edge_compatibility_descriptor
 	// The following structure contains __u32s, with each bit
 	// specifying whether the EPiC device supports the given
 	// command or functionality.
-
 	struct edge_compatibility_bits	Supports;
-
 };
 
 // Values for iDownloadFile
@@ -391,8 +386,8 @@ struct edge_compatibility_descriptor
 
 // Define the max block size that may be read or written
 // in a read/write RAM/ROM command.
-#define	MAX_SIZE_REQ_ION_READ_MEM	( (__u16) 64 )
-#define	MAX_SIZE_REQ_ION_WRITE_MEM	( (__u16) 64 )
+#define	MAX_SIZE_REQ_ION_READ_MEM	((__u16)64)
+#define	MAX_SIZE_REQ_ION_WRITE_MEM	((__u16)64)
 
 
 //
@@ -545,7 +540,7 @@ struct edge_boot_descriptor {
 	__u8		MajorVersion;		// C6 Firmware version: xx.
 	__u8		MinorVersion;		// C7			yy.
 	__le16		BuildNumber;		// C8			zzzz (LE format)
-	
+
 	__u16		EnumRootDescTable;	// CA Root of ROM-based descriptor table
 	__u8		NumDescTypes;		// CC Number of supported descriptor types
 
@@ -597,41 +592,36 @@ struct edge_boot_descriptor {
 #define I2C_DESC_TYPE_ION		0	// Not defined by TI
 
 
-struct ti_i2c_desc
-{
+struct ti_i2c_desc {
 	__u8	Type;			// Type of descriptor
 	__u16	Size;			// Size of data only not including header
 	__u8	CheckSum;		// Checksum (8 bit sum of data only)
 	__u8	Data[0];		// Data starts here
-}__attribute__((packed));
+} __attribute__((packed));
 
 // for 5152 devices only (type 2 record)
 // for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor
-struct ti_i2c_firmware_rec
-{
+struct ti_i2c_firmware_rec {
 	__u8	Ver_Major;		// Firmware Major version number
 	__u8	Ver_Minor;		// Firmware Minor version number
 	__u8	Data[0];		// Download starts here
-}__attribute__((packed));
+} __attribute__((packed));
 
 
-struct watchport_firmware_version
-{
+struct watchport_firmware_version {
 // Added 2 bytes for version number
 	__u8	Version_Major;		//  Download Version (for Watchport)
 	__u8	Version_Minor;
-}__attribute__((packed));
+} __attribute__((packed));
 
 
 // Structure of header of download image in fw_down.h
-struct ti_i2c_image_header
-{
+struct ti_i2c_image_header {
 	__le16	Length;
 	__u8	CheckSum;
-}__attribute__((packed));
+} __attribute__((packed));
 
-struct ti_basic_descriptor
-{
+struct ti_basic_descriptor {
 	__u8	Power;		// Self powered
 				// bit 7: 1 - power switching supported
 				//        0 - power switching not supported
@@ -663,9 +653,9 @@ struct ti_basic_descriptor
 #define TI_I2C_SIZE_MASK		0x1f  // 5 bits
 #define TI_GET_I2C_SIZE(x)		((((x) & TI_I2C_SIZE_MASK)+1)*256)
 
-#define TI_MAX_I2C_SIZE			( 16 * 1024 )
+#define TI_MAX_I2C_SIZE			(16 * 1024)
 
-#define TI_MANUF_VERSION_0		0	
+#define TI_MANUF_VERSION_0		0
 
 // IonConig2 flags
 #define TI_CONFIG2_RS232		0x01
@@ -676,8 +666,7 @@ struct ti_basic_descriptor
 #define TI_CONFIG2_WATCHPORT		0x10
 
 
-struct edge_ti_manuf_descriptor
-{
+struct edge_ti_manuf_descriptor {
 	__u8 IonConfig;		//  Config byte for ION manufacturing use
 	__u8 IonConfig2;	//  Expansion
 	__u8 Version;		//  Version
@@ -688,7 +677,7 @@ struct edge_ti_manuf_descriptor
 	__u8 HubConfig2;	//  Used to configure the Hub
 	__u8 TotalPorts;	//  Total Number of Com Ports for the entire device (All UMPs)
 	__u8 Reserved;		//  Reserved
-}__attribute__((packed));
+} __attribute__((packed));
 
 
 #endif		// if !defined(_USBVEND_H)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 3fea9298eb1..28913fa95fb 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -56,7 +56,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include "ipaq.h"
 
 #define KP_RETRIES	100
 
@@ -64,7 +63,7 @@
  * Version Information
  */
 
-#define DRIVER_VERSION "v0.5"
+#define DRIVER_VERSION "v1.0"
 #define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
 #define DRIVER_DESC "USB PocketPC PDA driver"
 
@@ -76,20 +75,8 @@ static int initial_wait;
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port);
-static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
-static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int ipaq_write_bulk(struct usb_serial_port *port,
-				const unsigned char *buf, int count);
-static void ipaq_write_gather(struct usb_serial_port *port);
-static void ipaq_read_bulk_callback(struct urb *urb);
-static void ipaq_write_bulk_callback(struct urb *urb);
-static int ipaq_write_room(struct tty_struct *tty);
-static int ipaq_chars_in_buffer(struct tty_struct *tty);
-static void ipaq_destroy_lists(struct usb_serial_port *port);
-
 
 static struct usb_device_id ipaq_id_table [] = {
 	/* The first entry is a placeholder for the insmod-specified device */
@@ -558,7 +545,7 @@ static struct usb_driver ipaq_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	ipaq_id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 
@@ -569,91 +556,24 @@ static struct usb_serial_driver ipaq_device = {
 		.name =		"ipaq",
 	},
 	.description =		"PocketPC PDA",
-	.usb_driver = 		&ipaq_driver,
+	.usb_driver =		&ipaq_driver,
 	.id_table =		ipaq_id_table,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
 	.open =			ipaq_open,
-	.close =		ipaq_close,
 	.attach =		ipaq_startup,
 	.calc_num_ports =	ipaq_calc_num_ports,
-	.write =		ipaq_write,
-	.write_room =		ipaq_write_room,
-	.chars_in_buffer =	ipaq_chars_in_buffer,
-	.read_bulk_callback =	ipaq_read_bulk_callback,
-	.write_bulk_callback =	ipaq_write_bulk_callback,
 };
 
-static spinlock_t	write_list_lock;
-static int		bytes_in;
-static int		bytes_out;
-
 static int ipaq_open(struct tty_struct *tty,
 			struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
-	struct ipaq_private	*priv;
-	struct ipaq_packet	*pkt;
-	int			i, result = 0;
+	int			result = 0;
 	int			retries = connect_retries;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	bytes_in = 0;
-	bytes_out = 0;
-	priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
-	if (priv == NULL) {
-		dev_err(&port->dev, "%s - Out of memory\n", __func__);
-		return -ENOMEM;
-	}
-	usb_set_serial_port_data(port, priv);
-	priv->active = 0;
-	priv->queue_len = 0;
-	priv->free_len = 0;
-	INIT_LIST_HEAD(&priv->queue);
-	INIT_LIST_HEAD(&priv->freelist);
-
-	for (i = 0; i < URBDATA_QUEUE_MAX / PACKET_SIZE; i++) {
-		pkt = kmalloc(sizeof(struct ipaq_packet), GFP_KERNEL);
-		if (pkt == NULL)
-			goto enomem;
-
-		pkt->data = kmalloc(PACKET_SIZE, GFP_KERNEL);
-		if (pkt->data == NULL) {
-			kfree(pkt);
-			goto enomem;
-		}
-		pkt->len = 0;
-		pkt->written = 0;
-		INIT_LIST_HEAD(&pkt->list);
-		list_add(&pkt->list, &priv->freelist);
-		priv->free_len += PACKET_SIZE;
-	}
-
-	/*
-	 * Lose the small buffers usbserial provides. Make larger ones.
-	 */
-
-	kfree(port->bulk_in_buffer);
-	kfree(port->bulk_out_buffer);
-	/* make sure the generic serial code knows */
-	port->bulk_out_buffer = NULL;
-
-	port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
-	if (port->bulk_in_buffer == NULL)
-		goto enomem;
-
-	port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
-	if (port->bulk_out_buffer == NULL) {
-		/* the buffer is useless, free it */
-		kfree(port->bulk_in_buffer);
-		port->bulk_in_buffer = NULL;
-		goto enomem;
-	}
-	port->read_urb->transfer_buffer = port->bulk_in_buffer;
-	port->write_urb->transfer_buffer = port->bulk_out_buffer;
-	port->read_urb->transfer_buffer_length = URBDATA_SIZE;
-	port->bulk_out_size = port->write_urb->transfer_buffer_length
-							= URBDATA_SIZE;
-
 	msleep(1000*initial_wait);
 
 	/*
@@ -663,7 +583,6 @@ static int ipaq_open(struct tty_struct *tty,
 	 * through. Since this has a reasonably high failure rate, we retry
 	 * several times.
 	 */
-
 	while (retries--) {
 		result = usb_control_msg(serial->dev,
 				usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21,
@@ -673,269 +592,15 @@ static int ipaq_open(struct tty_struct *tty,
 
 		msleep(1000);
 	}
-
 	if (!retries && result) {
-		dev_err(&port->dev, "%s - failed doing control urb, error %d\n",			__func__, result);
-		goto error;
-	}
-
-	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-		usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		ipaq_read_bulk_callback, port);
-
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-		goto error;
-	}
-
-	return 0;
-
-enomem:
-	result = -ENOMEM;
-	dev_err(&port->dev, "%s - Out of memory\n", __func__);
-error:
-	ipaq_destroy_lists(port);
-	kfree(priv);
-	return result;
-}
-
-
-static void ipaq_close(struct usb_serial_port *port)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/*
-	 * shut down bulk read and write
-	 */
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
-	ipaq_destroy_lists(port);
-	kfree(priv);
-	usb_set_serial_port_data(port, NULL);
-
-	/* Uncomment the following line if you want to see some statistics
-	 * in your syslog */
-	/* info ("Bytes In = %d  Bytes Out = %d", bytes_in, bytes_out); */
-}
-
-static void ipaq_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port	*port = urb->context;
-	struct tty_struct	*tty;
-	unsigned char		*data = urb->transfer_buffer;
-	int			result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-		bytes_in += urb->actual_length;
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-	    usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
-	    port->read_urb->transfer_buffer,
-	    port->read_urb->transfer_buffer_length,
-	    ipaq_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-	return;
-}
-
-static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count)
-{
-	const unsigned char	*current_position = buf;
-	int			bytes_sent = 0;
-	int			transfer_size;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		transfer_size = min(count, PACKET_SIZE);
-		if (ipaq_write_bulk(port, current_position, transfer_size))
-			break;
-		current_position += transfer_size;
-		bytes_sent += transfer_size;
-		count -= transfer_size;
-		bytes_out += transfer_size;
+		dev_err(&port->dev, "%s - failed doing control urb, error %d\n",
+							__func__, result);
+		return result;
 	}
 
-	return bytes_sent;
+	return usb_serial_generic_open(tty, port);
 }
 
-static int ipaq_write_bulk(struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	struct ipaq_packet	*pkt = NULL;
-	int			result = 0;
-	unsigned long		flags;
-
-	if (priv->free_len <= 0) {
-		dbg("%s - we're stuffed", __func__);
-		return -EAGAIN;
-	}
-
-	spin_lock_irqsave(&write_list_lock, flags);
-	if (!list_empty(&priv->freelist)) {
-		pkt = list_entry(priv->freelist.next, struct ipaq_packet, list);
-		list_del(&pkt->list);
-		priv->free_len -= PACKET_SIZE;
-	}
-	spin_unlock_irqrestore(&write_list_lock, flags);
-	if (pkt == NULL) {
-		dbg("%s - we're stuffed", __func__);
-		return -EAGAIN;
-	}
-
-	memcpy(pkt->data, buf, count);
-	usb_serial_debug_data(debug, &port->dev, __func__, count, pkt->data);
-
-	pkt->len = count;
-	pkt->written = 0;
-	spin_lock_irqsave(&write_list_lock, flags);
-	list_add_tail(&pkt->list, &priv->queue);
-	priv->queue_len += count;
-	if (priv->active == 0) {
-		priv->active = 1;
-		ipaq_write_gather(port);
-		spin_unlock_irqrestore(&write_list_lock, flags);
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-	} else {
-		spin_unlock_irqrestore(&write_list_lock, flags);
-	}
-	return result;
-}
-
-static void ipaq_write_gather(struct usb_serial_port *port)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	struct usb_serial	*serial = port->serial;
-	int			count, room;
-	struct ipaq_packet	*pkt, *tmp;
-	struct urb		*urb = port->write_urb;
-
-	room = URBDATA_SIZE;
-	list_for_each_entry_safe(pkt, tmp, &priv->queue, list) {
-		count = min(room, (int)(pkt->len - pkt->written));
-		memcpy(urb->transfer_buffer + (URBDATA_SIZE - room),
-		       pkt->data + pkt->written, count);
-		room -= count;
-		pkt->written += count;
-		priv->queue_len -= count;
-		if (pkt->written == pkt->len) {
-			list_move(&pkt->list, &priv->freelist);
-			priv->free_len += PACKET_SIZE;
-		}
-		if (room == 0)
-			break;
-	}
-
-	count = URBDATA_SIZE - room;
-	usb_fill_bulk_urb(port->write_urb, serial->dev,
-		usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress),
-		port->write_urb->transfer_buffer, count,
-		ipaq_write_bulk_callback, port);
-	return;
-}
-
-static void ipaq_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port	*port = urb->context;
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	unsigned long		flags;
-	int			result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	spin_lock_irqsave(&write_list_lock, flags);
-	if (!list_empty(&priv->queue)) {
-		ipaq_write_gather(port);
-		spin_unlock_irqrestore(&write_list_lock, flags);
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-	} else {
-		priv->active = 0;
-		spin_unlock_irqrestore(&write_list_lock, flags);
-	}
-
-	usb_serial_port_softint(port);
-}
-
-static int ipaq_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-
-	dbg("%s - freelen %d", __func__, priv->free_len);
-	return priv->free_len;
-}
-
-static int ipaq_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-
-	dbg("%s - queuelen %d", __func__, priv->queue_len);
-	return priv->queue_len;
-}
-
-static void ipaq_destroy_lists(struct usb_serial_port *port)
-{
-	struct ipaq_private	*priv = usb_get_serial_port_data(port);
-	struct ipaq_packet	*pkt, *tmp;
-
-	list_for_each_entry_safe(pkt, tmp, &priv->queue, list) {
-		kfree(pkt->data);
-		kfree(pkt);
-	}
-	list_for_each_entry_safe(pkt, tmp, &priv->freelist, list) {
-		kfree(pkt->data);
-		kfree(pkt);
-	}
-}
-
-
 static int ipaq_calc_num_ports(struct usb_serial *serial)
 {
 	/*
@@ -994,7 +659,6 @@ static int ipaq_startup(struct usb_serial *serial)
 static int __init ipaq_init(void)
 {
 	int retval;
-	spin_lock_init(&write_list_lock);
 	retval = usb_serial_register(&ipaq_device);
 	if (retval)
 		goto failed_usb_serial_register;
@@ -1015,7 +679,6 @@ failed_usb_serial_register:
 	return retval;
 }
 
-
 static void __exit ipaq_exit(void)
 {
 	usb_deregister(&ipaq_driver);
diff --git a/drivers/usb/serial/ipaq.h b/drivers/usb/serial/ipaq.h
deleted file mode 100644
index 2b9035918b8..00000000000
--- a/drivers/usb/serial/ipaq.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * USB Compaq iPAQ driver
- *
- *	Copyright (C) 2001 - 2002
- *	    Ganesh Varadarajan <ganesh@veritas.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- */
-
-#ifndef __LINUX_USB_SERIAL_IPAQ_H
-#define __LINUX_USB_SERIAL_IPAQ_H
-
-/*
- * Since we can't queue our bulk write urbs (don't know why - it just
- * doesn't work), we can send down only one write urb at a time. The simplistic
- * approach taken by the generic usbserial driver will work, but it's not good
- * for performance. Therefore, we buffer upto URBDATA_QUEUE_MAX bytes of write
- * requests coming from the line discipline. This is done by chaining them
- * in lists of struct ipaq_packet, each packet holding a maximum of
- * PACKET_SIZE bytes.
- *
- * ipaq_write() can be called from bottom half context; hence we can't
- * allocate memory for packets there. So we initialize a pool of packets at
- * the first open and maintain a freelist.
- *
- * The value of PACKET_SIZE was empirically determined by
- * checking the maximum write sizes sent down by the ppp ldisc.
- * URBDATA_QUEUE_MAX is set to 64K, which is the maximum TCP window size.
- */
-
-struct ipaq_packet {
-	char			*data;
-	size_t			len;
-	size_t			written;
-	struct list_head	list;
-};
-
-struct ipaq_private {
-	int			active;
-	int			queue_len;
-	int			free_len;
-	struct list_head	queue;
-	struct list_head	freelist;
-};
-
-#define URBDATA_SIZE		4096
-#define URBDATA_QUEUE_MAX	(64 * 1024)
-#define PACKET_SIZE		256
-
-#endif
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index e1d07840cee..ca77e88836b 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -34,7 +34,6 @@
  * DCD, DTR, RTS, CTS which are currently faked.
  * It's good enough for PPP at this point. It's based off all kinds of
  * code found in usb/serial and usb/class
- *
  */
 
 #include <linux/kernel.h>
@@ -52,7 +51,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION	"v0.3"
+#define DRIVER_VERSION	"v0.4"
 #define DRIVER_AUTHOR	"Roelf Diedericks"
 #define DRIVER_DESC	"IPWireless tty driver"
 
@@ -65,8 +64,6 @@
 /* Message sizes */
 #define EVENT_BUFFER_SIZE	0xFF
 #define CHAR2INT16(c1, c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
-#define NUM_BULK_URBS		24
-#define NUM_CONTROL_URBS	16
 
 /* vendor/product pairs that are known work with this driver*/
 #define IPW_VID		0x0bc3
@@ -151,47 +148,6 @@ static struct usb_driver usb_ipw_driver = {
 
 static int debug;
 
-static void ipw_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	unsigned char *data = urb->transfer_buffer;
-	struct tty_struct *tty;
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-					urb->actual_length, data);
-
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		tty_insert_flip_string(tty, data, urb->actual_length);
-		tty_flip_buffer_push(tty);
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-					   port->bulk_in_endpointAddress),
-			  port->read_urb->transfer_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  ipw_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-	return;
-}
-
 static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_device *dev = port->serial->dev;
@@ -229,15 +185,7 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/*--2: Start reading from the device */
 	dbg("%s: setting up bulk read callback", __func__);
-	usb_fill_bulk_urb(port->read_urb, dev,
-			  usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  port->bulk_in_size,
-			  ipw_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result < 0)
-		dbg("%s - usb_submit_urb(read bulk) failed with status %d",
-							__func__, result);
+	usb_serial_generic_open(tty, port);
 
 	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
 	dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
@@ -267,35 +215,6 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"initial flowcontrol failed (error = %d)\n", result);
 
-
-	/*--5: raise the dtr */
-	dbg("%s:raising dtr", __func__);
-	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			 IPW_SIO_SET_PIN,
-			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_SETDTR,
-			 0,
-			 NULL,
-			 0,
-			 200000);
-	if (result < 0)
-		dev_err(&port->dev,
-				"setting dtr failed (error = %d)\n", result);
-
-	/*--6: raise the rts */
-	dbg("%s:raising rts", __func__);
-	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-			 IPW_SIO_SET_PIN,
-			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
-			 IPW_PIN_SETRTS,
-			 0,
-			 NULL,
-			 0,
-			 200000);
-	if (result < 0)
-		dev_err(&port->dev,
-				"setting dtr failed (error = %d)\n", result);
-
 	kfree(buf_flow_init);
 	return 0;
 }
@@ -305,8 +224,8 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 	struct usb_device *dev = port->serial->dev;
 	int result;
 
-	/*--1: drop the dtr */
-	dbg("%s:dropping dtr", __func__);
+	dbg("%s: on = %d", __func__, on);
+
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN,
 			 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -316,22 +235,20 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on)
 			 0,
 			 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping dtr failed (error = %d)\n",
+		dev_err(&port->dev, "setting dtr failed (error = %d)\n",
 								result);
 
-	/*--2: drop the rts */
-	dbg("%s:dropping rts", __func__);
 	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			 IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
-			 		USB_RECIP_INTERFACE | USB_DIR_OUT,
+					USB_RECIP_INTERFACE | USB_DIR_OUT,
 			 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
 			 0,
 			 NULL,
 			 0,
 			 200000);
 	if (result < 0)
-		dev_err(&port->dev,
-				"dropping rts failed (error = %d)\n", result);
+		dev_err(&port->dev, "setting rts failed (error = %d)\n",
+								result);
 }
 
 static void ipw_close(struct usb_serial_port *port)
@@ -368,83 +285,7 @@ static void ipw_close(struct usb_serial_port *port)
 		dev_err(&port->dev,
 			"Disabling bulk RxRead failed (error = %d)\n", result);
 
-	/* shutdown any in-flight urbs that we know about */
-	usb_kill_urb(port->read_urb);
-	usb_kill_urb(port->write_urb);
-}
-
-static void ipw_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s", __func__);
-
-	port->write_urb_busy = 0;
-
-	if (status)
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-
-	usb_serial_port_softint(port);
-}
-
-static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret;
-
-	dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
-		count, in_interrupt());
-
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return 0;
-	}
-
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
-		dbg("%s - already writing", __func__);
-		return 0;
-	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
-
-	count = min(count, port->bulk_out_size);
-	memcpy(port->bulk_out_buffer, buf, count);
-
-	dbg("%s count now:%d", __func__, count);
-
-	usb_fill_bulk_urb(port->write_urb, dev,
-			  usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
-			  port->write_urb->transfer_buffer,
-			  count,
-			  ipw_write_bulk_callback,
-			  port);
-
-	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (ret != 0) {
-		port->write_urb_busy = 0;
-		dbg("%s - usb_submit_urb(write bulk) failed with error = %d",
-								__func__, ret);
-		return ret;
-	}
-
-	dbg("%s returning %d", __func__, count);
-	return count;
-}
-
-static int ipw_probe(struct usb_serial_port *port)
-{
-	return 0;
-}
-
-static int ipw_disconnect(struct usb_serial_port *port)
-{
-	usb_set_serial_port_data(port, NULL);
-	return 0;
+	usb_serial_generic_close(port);
 }
 
 static struct usb_serial_driver ipw_device = {
@@ -453,17 +294,12 @@ static struct usb_serial_driver ipw_device = {
 		.name =		"ipw",
 	},
 	.description =		"IPWireless converter",
-	.usb_driver = 		&usb_ipw_driver,
+	.usb_driver =		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,
 	.dtr_rts =		ipw_dtr_rts,
-	.port_probe = 		ipw_probe,
-	.port_remove =		ipw_disconnect,
-	.write =		ipw_write,
-	.write_bulk_callback =	ipw_write_bulk_callback,
-	.read_bulk_callback =	ipw_read_bulk_callback,
 };
 
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 4a0f5197423..ccbce4066d0 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -3,6 +3,7 @@
  *
  *	Copyright (C) 2001-2002	Greg Kroah-Hartman (greg@kroah.com)
  *	Copyright (C) 2002	Gary Brubaker (xavyer@ix.netcom.com)
+ *	Copyright (C) 2010	Johan Hovold (jhovold@gmail.com)
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -72,8 +73,8 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.4"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
+#define DRIVER_VERSION "v0.5"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB IR Dongle driver"
 
 static int debug;
@@ -87,11 +88,9 @@ static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
 static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void ir_close(struct usb_serial_port *port);
-static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count);
-static void ir_write_bulk_callback (struct urb *urb);
-static void ir_read_bulk_callback (struct urb *urb);
+static int ir_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
+static void ir_process_read_urb(struct urb *urb);
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);
 
@@ -130,10 +129,8 @@ static struct usb_serial_driver ir_device = {
 	.set_termios		= ir_set_termios,
 	.attach			= ir_startup,
 	.open			= ir_open,
-	.close			= ir_close,
-	.write			= ir_write,
-	.write_bulk_callback	= ir_write_bulk_callback,
-	.read_bulk_callback	= ir_read_bulk_callback,
+	.prepare_write_buffer	= ir_prepare_write_buffer,
+	.process_read_urb	= ir_process_read_urb,
 };
 
 static inline void irda_usb_dump_class_desc(struct usb_irda_cs_descriptor *desc)
@@ -198,7 +195,6 @@ error:
 	return NULL;
 }
 
-
 static u8 ir_xbof_change(u8 xbof)
 {
 	u8 result;
@@ -237,7 +233,6 @@ static u8 ir_xbof_change(u8 xbof)
 	return(result);
 }
 
-
 static int ir_startup(struct usb_serial *serial)
 {
 	struct usb_irda_cs_descriptor *irda_desc;
@@ -297,83 +292,22 @@ static int ir_startup(struct usb_serial *serial)
 
 static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	char *buffer;
-	int result = 0;
+	int i;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (buffer_size) {
-		/* override the default buffer sizes */
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n", __func__);
-			return -ENOMEM;
-		}
-		kfree(port->read_urb->transfer_buffer);
-		port->read_urb->transfer_buffer = buffer;
-		port->read_urb->transfer_buffer_length = buffer_size;
-
-		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(&port->dev, "%s - out of memory.\n", __func__);
-			return -ENOMEM;
-		}
-		kfree(port->write_urb->transfer_buffer);
-		port->write_urb->transfer_buffer = buffer;
-		port->write_urb->transfer_buffer_length = buffer_size;
-		port->bulk_out_size = buffer_size;
-	}
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
 
 	/* Start reading from the device */
-	usb_fill_bulk_urb(
-		port->read_urb,
-		port->serial->dev,
-		usb_rcvbulkpipe(port->serial->dev,
-			port->bulk_in_endpointAddress),
-		port->read_urb->transfer_buffer,
-		port->read_urb->transfer_buffer_length,
-		ir_read_bulk_callback,
-		port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-
-	return result;
+	return usb_serial_generic_open(tty, port);
 }
 
-static void ir_close(struct usb_serial_port *port)
+static int ir_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	dbg("%s - port %d", __func__, port->number);
-
-	/* shutdown our bulk read */
-	usb_kill_urb(port->read_urb);
-}
-
-static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	unsigned char *transfer_buffer;
-	int result;
-	int transfer_size;
-
-	dbg("%s - port = %d, count = %d", __func__, port->number, count);
-
-	if (count == 0)
-		return 0;
-
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
-		dbg("%s - already writing", __func__);
-		return 0;
-	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
-
-	transfer_buffer = port->write_urb->transfer_buffer;
-	transfer_size = min(count, port->bulk_out_size - 1);
+	unsigned char *buf = dest;
+	int count;
 
 	/*
 	 * The first byte of the packet we send to the device contains an
@@ -382,119 +316,57 @@ static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 	 *
 	 * See section 5.4.2.2 of the USB IrDA spec.
 	 */
-	*transfer_buffer = ir_xbof | ir_baud;
-	++transfer_buffer;
-
-	memcpy(transfer_buffer, buf, transfer_size);
+	*buf = ir_xbof | ir_baud;
 
-	usb_fill_bulk_urb(
-		port->write_urb,
-		port->serial->dev,
-		usb_sndbulkpipe(port->serial->dev,
-			port->bulk_out_endpointAddress),
-		port->write_urb->transfer_buffer,
-		transfer_size + 1,
-		ir_write_bulk_callback,
-		port);
-
-	port->write_urb->transfer_flags = URB_ZERO_PACKET;
-
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		port->write_urb_busy = 0;
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, result);
-	} else
-		result = transfer_size;
-
-	return result;
+	count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
+								&port->lock);
+	return count + 1;
 }
 
-static void ir_write_bulk_callback(struct urb *urb)
+static void ir_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
+	unsigned char *data = urb->transfer_buffer;
+	struct tty_struct *tty;
 
-	port->write_urb_busy = 0;
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
+	if (!urb->actual_length)
 		return;
-	}
+	/*
+	 * The first byte of the packet we get from the device
+	 * contains a busy indicator and baud rate change.
+	 * See section 5.4.1.2 of the USB IrDA spec.
+	 */
+	if (*data & 0x0f)
+		ir_baud = *data & 0x0f;
 
-	usb_serial_debug_data(
-		debug,
-		&port->dev,
-		__func__,
-		urb->actual_length,
-		urb->transfer_buffer);
+	if (urb->actual_length == 1)
+		return;
 
-	usb_serial_port_softint(port);
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+	tty_insert_flip_string(tty, data + 1, urb->actual_length - 1);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
-static void ir_read_bulk_callback(struct urb *urb)
+static void ir_set_termios_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int result;
 	int status = urb->status;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	switch (status) {
-	case 0: /* Successful */
-		/*
-		 * The first byte of the packet we get from the device
-		 * contains a busy indicator and baud rate change.
-		 * See section 5.4.1.2 of the USB IrDA spec.
-		 */
-		if ((*data & 0x0f) > 0)
-			ir_baud = *data & 0x0f;
-		usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-		tty = tty_port_tty_get(&port->port);
-		tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
-		tty_flip_buffer_push(tty);
-		tty_kref_put(tty);
-
-		/*
-		 * No break here.
-		 * We want to resubmit the urb so we can read
-		 * again.
-		 */
-
-	case -EPROTO: /* taking inspiration from pl2303.c */
-			/* Continue trying to always read */
-		usb_fill_bulk_urb(
-			port->read_urb,
-			port->serial->dev, 
-			usb_rcvbulkpipe(port->serial->dev,
-				port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			ir_read_bulk_callback,
-			port);
-
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
-			break ;
-	default:
-		dbg("%s - nonzero read bulk status received: %d",
-			__func__, status);
-		break ;
-	}
-	return;
+	kfree(urb->transfer_buffer);
+
+	if (status)
+		dbg("%s - non-zero urb status: %d", __func__, status);
 }
 
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
+	struct urb *urb;
 	unsigned char *transfer_buffer;
 	int result;
 	speed_t baud;
@@ -548,41 +420,63 @@ static void ir_set_termios(struct tty_struct *tty,
 	else
 		ir_xbof = ir_xbof_change(xbof) ;
 
-	/* FIXME need to check to see if our write urb is busy right
-	 * now, or use a urb pool.
-	 *
+	/* Only speed changes are supported */
+	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_encode_baud_rate(tty, baud, baud);
+
+	/*
 	 * send the baud change out on an "empty" data packet
 	 */
-	transfer_buffer = port->write_urb->transfer_buffer;
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb) {
+		dev_err(&port->dev, "%s - no more urbs\n", __func__);
+		return;
+	}
+	transfer_buffer = kmalloc(1, GFP_KERNEL);
+	if (!transfer_buffer) {
+		dev_err(&port->dev, "%s - out of memory\n", __func__);
+		goto err_buf;
+	}
+
 	*transfer_buffer = ir_xbof | ir_baud;
 
 	usb_fill_bulk_urb(
-		port->write_urb,
+		urb,
 		port->serial->dev,
 		usb_sndbulkpipe(port->serial->dev,
 			port->bulk_out_endpointAddress),
-		port->write_urb->transfer_buffer,
+		transfer_buffer,
 		1,
-		ir_write_bulk_callback,
+		ir_set_termios_callback,
 		port);
 
-	port->write_urb->transfer_flags = URB_ZERO_PACKET;
+	urb->transfer_flags = URB_ZERO_PACKET;
 
-	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
+	result = usb_submit_urb(urb, GFP_KERNEL);
+	if (result) {
+		dev_err(&port->dev, "%s - failed to submit urb: %d\n",
+							__func__, result);
+		goto err_subm;
+	}
 
-	/* Only speed changes are supported */
-	tty_termios_copy_hw(tty->termios, old_termios);
-	tty_encode_baud_rate(tty, baud, baud);
+	usb_free_urb(urb);
+
+	return;
+err_subm:
+	kfree(transfer_buffer);
+err_buf:
+	usb_free_urb(urb);
 }
 
 static int __init ir_init(void)
 {
 	int retval;
 
+	if (buffer_size) {
+		ir_device.bulk_in_size = buffer_size;
+		ir_device.bulk_out_size = buffer_size;
+	}
+
 	retval = usb_serial_register(&ir_device);
 	if (retval)
 		goto failed_usb_serial_register;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 43f13cf2f01..74551cb2e8e 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1044,34 +1044,6 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (buf == NULL)
 		return -ENOMEM;
 
-	/* fixup the endpoint buffer size */
-	kfree(port->bulk_out_buffer);
-	port->bulk_out_buffer = kmalloc(512, GFP_KERNEL);
-	port->bulk_out_size = 512;
-	kfree(port->bulk_in_buffer);
-	port->bulk_in_buffer = kmalloc(512, GFP_KERNEL);
-	port->bulk_in_size = 512;
-
-	if (!port->bulk_out_buffer || !port->bulk_in_buffer) {
-		kfree(port->bulk_out_buffer);
-		kfree(port->bulk_in_buffer);
-		kfree(buf);
-		return -ENOMEM;
-	}
-
-	usb_fill_bulk_urb(port->write_urb, port->serial->dev,
-			  usb_sndbulkpipe(port->serial->dev,
-					  port->bulk_out_endpointAddress),
-			  port->bulk_out_buffer, 512,
-			  NULL, NULL);
-
-
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			  usb_rcvbulkpipe(port->serial->dev,
-					  port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer, 512,
-			  NULL, NULL);
-
 	priv->poll = 0;
 
 	/* initialize writebuf */
@@ -1277,6 +1249,8 @@ static struct usb_serial_driver iuu_device = {
 		   },
 	.id_table = id_table,
 	.num_ports = 1,
+	.bulk_in_size = 512,
+	.bulk_out_size = 512,
 	.port_probe = iuu_create_sysfs_attrs,
 	.port_remove = iuu_remove_sysfs_attrs,
 	.open = iuu_open,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 8eef91ba4b1..cdbe8bf7f67 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -1,6 +1,7 @@
 /*
  * KLSI KL5KUSB105 chip RS232 converter driver
  *
+ *   Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -34,17 +35,6 @@
  *	implement handshaking or decide that we do not support it
  */
 
-/* History:
- *   0.3a - implemented pools of write URBs
- *   0.3  - alpha version for public testing
- *   0.2  - TIOCMGET works, so autopilot(1) can be used!
- *   0.1  - can be used to do pilot-xfer -p /dev/ttyUSB0 -l
- *
- *   The driver skeleton is mainly based on mct_u232.c and various other
- *   pieces of code shamelessly copied from the drivers/usb/serial/ directory.
- */
-
-
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -64,8 +54,8 @@ static int debug;
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.3a"
-#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>"
+#define DRIVER_VERSION "v0.4"
+#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
 
 
@@ -73,23 +63,17 @@ static int debug;
  * Function prototypes
  */
 static int  klsi_105_startup(struct usb_serial *serial);
-static void klsi_105_disconnect(struct usb_serial *serial);
 static void klsi_105_release(struct usb_serial *serial);
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
-static int  klsi_105_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count);
-static void klsi_105_write_bulk_callback(struct urb *urb);
-static int  klsi_105_chars_in_buffer(struct tty_struct *tty);
-static int  klsi_105_write_room(struct tty_struct *tty);
-static void klsi_105_read_bulk_callback(struct urb *urb);
 static void klsi_105_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
-static void klsi_105_throttle(struct tty_struct *tty);
-static void klsi_105_unthrottle(struct tty_struct *tty);
 static int  klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
 static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear);
+static void klsi_105_process_read_urb(struct urb *urb);
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
 
 /*
  * All of the device info needed for the KLSI converters.
@@ -107,7 +91,7 @@ static struct usb_driver kl5kusb105d_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
-	.no_dynamic_id = 	1,
+	.no_dynamic_id =	1,
 };
 
 static struct usb_serial_driver kl5kusb105d_device = {
@@ -115,26 +99,23 @@ static struct usb_serial_driver kl5kusb105d_device = {
 		.owner =	THIS_MODULE,
 		.name =		"kl5kusb105d",
 	},
-	.description =	     "KL5KUSB105D / PalmConnect",
-	.usb_driver =	     &kl5kusb105d_driver,
-	.id_table =	     id_table,
-	.num_ports =	     1,
-	.open =		     klsi_105_open,
-	.close =	     klsi_105_close,
-	.write =	     klsi_105_write,
-	.write_bulk_callback = klsi_105_write_bulk_callback,
-	.chars_in_buffer =   klsi_105_chars_in_buffer,
-	.write_room =        klsi_105_write_room,
-	.read_bulk_callback = klsi_105_read_bulk_callback,
-	.set_termios =	     klsi_105_set_termios,
-	/*.break_ctl =	     klsi_105_break_ctl,*/
-	.tiocmget =          klsi_105_tiocmget,
-	.tiocmset =          klsi_105_tiocmset,
-	.attach =	     klsi_105_startup,
-	.disconnect =	     klsi_105_disconnect,
-	.release =	     klsi_105_release,
-	.throttle =	     klsi_105_throttle,
-	.unthrottle =	     klsi_105_unthrottle,
+	.description =		"KL5KUSB105D / PalmConnect",
+	.usb_driver =		&kl5kusb105d_driver,
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	64,
+	.open =			klsi_105_open,
+	.close =		klsi_105_close,
+	.set_termios =		klsi_105_set_termios,
+	/*.break_ctl =		klsi_105_break_ctl,*/
+	.tiocmget =		klsi_105_tiocmget,
+	.tiocmset =		klsi_105_tiocmset,
+	.attach =		klsi_105_startup,
+	.release =		klsi_105_release,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	klsi_105_process_read_urb,
+	.prepare_write_buffer =	klsi_105_prepare_write_buffer,
 };
 
 struct klsi_105_port_settings {
@@ -145,18 +126,11 @@ struct klsi_105_port_settings {
 	__u8	unknown2;
 } __attribute__ ((packed));
 
-/* we implement a pool of NUM_URBS urbs per usb_serial */
-#define NUM_URBS			1
-#define URB_TRANSFER_BUFFER_SIZE	64
 struct klsi_105_private {
 	struct klsi_105_port_settings	cfg;
 	struct ktermios			termios;
 	unsigned long			line_state; /* modem line settings */
-	/* write pool */
-	struct urb			*write_urb_pool[NUM_URBS];
 	spinlock_t			lock;
-	unsigned long			bytes_in;
-	unsigned long			bytes_out;
 };
 
 
@@ -189,7 +163,7 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 		 settings->pktlen, settings->baudrate, settings->databits,
 		 settings->unknown1, settings->unknown2);
 	return rc;
-} /* klsi_105_chg_port_settings */
+}
 
 /* translate a 16-bit status value from the device to linux's TIO bits */
 static unsigned long klsi_105_status2linestate(const __u16 status)
@@ -202,6 +176,7 @@ static unsigned long klsi_105_status2linestate(const __u16 status)
 
 	return res;
 }
+
 /*
  * Read line control via vendor command and return result through
  * *line_state_p
@@ -258,7 +233,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 static int klsi_105_startup(struct usb_serial *serial)
 {
 	struct klsi_105_private *priv;
-	int i, j;
+	int i;
 
 	/* check if we support the product id (see keyspan.c)
 	 * FIXME
@@ -282,29 +257,9 @@ static int klsi_105_startup(struct usb_serial *serial)
 
 		priv->line_state    = 0;
 
-		priv->bytes_in	    = 0;
-		priv->bytes_out	    = 0;
 		usb_set_serial_port_data(serial->port[i], priv);
 
 		spin_lock_init(&priv->lock);
-		for (j = 0; j < NUM_URBS; j++) {
-			struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
-
-			priv->write_urb_pool[j] = urb;
-			if (urb == NULL) {
-				dev_err(&serial->dev->dev, "No more urbs???\n");
-				goto err_cleanup;
-			}
-
-			urb->transfer_buffer =
-				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-			if (!urb->transfer_buffer) {
-				dev_err(&serial->dev->dev,
-					"%s - out of memory for urb buffers.\n",
-					__func__);
-				goto err_cleanup;
-			}
-		}
 
 		/* priv->termios is left uninitalized until port opening */
 		init_waitqueue_head(&serial->port[i]->write_wait);
@@ -315,44 +270,11 @@ static int klsi_105_startup(struct usb_serial *serial)
 err_cleanup:
 	for (; i >= 0; i--) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		for (j = 0; j < NUM_URBS; j++) {
-			if (priv->write_urb_pool[j]) {
-				kfree(priv->write_urb_pool[j]->transfer_buffer);
-				usb_free_urb(priv->write_urb_pool[j]);
-			}
-		}
+		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
 	return -ENOMEM;
-} /* klsi_105_startup */
-
-
-static void klsi_105_disconnect(struct usb_serial *serial)
-{
-	int i;
-
-	dbg("%s", __func__);
-
-	/* stop reads and writes on all ports */
-	for (i = 0; i < serial->num_ports; ++i) {
-		struct klsi_105_private *priv =
-				usb_get_serial_port_data(serial->port[i]);
-
-		if (priv) {
-			/* kill our write urb pool */
-			int j;
-			struct urb **write_urbs = priv->write_urb_pool;
-
-			for (j = 0; j < NUM_URBS; j++) {
-				if (write_urbs[j]) {
-					usb_kill_urb(write_urbs[j]);
-					usb_free_urb(write_urbs[j]);
-				}
-			}
-		}
-	}
-} /* klsi_105_disconnect */
-
+}
 
 static void klsi_105_release(struct usb_serial *serial)
 {
@@ -360,13 +282,9 @@ static void klsi_105_release(struct usb_serial *serial)
 
 	dbg("%s", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		struct klsi_105_private *priv =
-				usb_get_serial_port_data(serial->port[i]);
-
-		kfree(priv);
-	}
-} /* klsi_105_release */
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
+}
 
 static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
@@ -416,18 +334,8 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* READ_ON and urb submission */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-		      usb_rcvbulkpipe(port->serial->dev,
-				      port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer,
-		      port->read_urb->transfer_buffer_length,
-		      klsi_105_read_bulk_callback,
-		      port);
-
-	rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	rc = usb_serial_generic_open(tty, port);
 	if (rc) {
-		dev_err(&port->dev, "%s - failed submitting read urb, "
-			"error %d\n", __func__, rc);
 		retval = rc;
 		goto exit;
 	}
@@ -460,12 +368,10 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 exit:
 	kfree(cfg);
 	return retval;
-} /* klsi_105_open */
-
+}
 
 static void klsi_105_close(struct usb_serial_port *port)
 {
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;
 
 	dbg("%s port %d", __func__, port->number);
@@ -488,239 +394,62 @@ static void klsi_105_close(struct usb_serial_port *port)
 	mutex_unlock(&port->serial->disc_mutex);
 
 	/* shutdown our bulk reads and writes */
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
-	/* unlink our write pool */
-	/* FIXME */
+	usb_serial_generic_close(port);
+
 	/* wgg - do I need this? I think so. */
 	usb_kill_urb(port->interrupt_in_urb);
-	dev_info(&port->serial->dev->dev,
-		 "port stats: %ld bytes in, %ld bytes out\n",
-		 priv->bytes_in, priv->bytes_out);
-} /* klsi_105_close */
-
+}
 
 /* We need to write a complete 64-byte data block and encode the
  * number actually sent in the first double-byte, LSB-order. That
  * leaves at most 62 bytes of payload.
  */
-#define KLSI_105_DATA_OFFSET	2   /* in the bulk urb data block */
-
-
-static int klsi_105_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count)
+#define KLSI_HDR_LEN		2
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	int result, size;
-	int bytes_sent = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	while (count > 0) {
-		/* try to find a free urb (write 0 bytes if none) */
-		struct urb *urb = NULL;
-		unsigned long flags;
-		int i;
-		/* since the pool is per-port we might not need
-		   the spin lock !? */
-		spin_lock_irqsave(&priv->lock, flags);
-		for (i = 0; i < NUM_URBS; i++) {
-			if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
-				urb = priv->write_urb_pool[i];
-				dbg("%s - using pool URB %d", __func__, i);
-				break;
-			}
-		}
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		if (urb == NULL) {
-			dbg("%s - no more free urbs", __func__);
-			goto exit;
-		}
-
-		if (urb->transfer_buffer == NULL) {
-			urb->transfer_buffer =
-				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
-			if (urb->transfer_buffer == NULL) {
-				dev_err(&port->dev,
-					"%s - no more kernel memory...\n",
-					__func__);
-				goto exit;
-			}
-		}
-
-		size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
-		size = min(size, URB_TRANSFER_BUFFER_SIZE -
-							KLSI_105_DATA_OFFSET);
-
-		memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
-
-		/* write payload size into transfer buffer */
-		((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
-		((__u8 *)urb->transfer_buffer)[1] = (__u8) ((size & 0xFF00)>>8);
-
-		/* set up our urb */
-		usb_fill_bulk_urb(urb, port->serial->dev,
-			      usb_sndbulkpipe(port->serial->dev,
-					      port->bulk_out_endpointAddress),
-			      urb->transfer_buffer,
-			      URB_TRANSFER_BUFFER_SIZE,
-			      klsi_105_write_bulk_callback,
-			      port);
-
-		/* send the data out the bulk port */
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result) {
-			dev_err(&port->dev,
-				"%s - failed submitting write urb, error %d\n",
-				__func__, result);
-			goto exit;
-		}
-		buf += size;
-		bytes_sent += size;
-		count -= size;
-	}
-exit:
-	/* lockless, but it's for debug info only... */
-	priv->bytes_out += bytes_sent;
-
-	return bytes_sent;	/* that's how much we wrote */
-} /* klsi_105_write */
-
-static void klsi_105_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d", __func__,
-		    status);
-		return;
-	}
+	unsigned char *buf = dest;
+	int count;
 
-	usb_serial_port_softint(port);
-} /* klsi_105_write_bulk_completion_callback */
+	count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size,
+								&port->lock);
+	put_unaligned_le16(count, buf);
 
-
-/* return number of characters currently in the writing process */
-static int klsi_105_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int chars = 0;
-	int i;
-	unsigned long flags;
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (priv->write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
+	return count + KLSI_HDR_LEN;
 }
 
-static int klsi_105_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned long flags;
-	int i;
-	int room = 0;
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (priv->write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-}
-
-
-
-static void klsi_105_read_bulk_callback(struct urb *urb)
+/* The data received is preceded by a length double-byte in LSB-first order.
+ */
+static void klsi_105_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
-	int rc;
-	int status = urb->status;
+	struct tty_struct *tty;
+	unsigned len;
 
-	dbg("%s - port %d", __func__, port->number);
+	/* empty urbs seem to happen, we ignore them */
+	if (!urb->actual_length)
+		return;
 
-	/* The urb might have been killed. */
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d", __func__,
-		    status);
+	if (urb->actual_length <= KLSI_HDR_LEN) {
+		dbg("%s - malformed packet", __func__);
 		return;
 	}
 
-	/* The data received is again preceded by a length double-byte in LSB-
-	 * first order (see klsi_105_write() )
-	 */
-	if (urb->actual_length == 0) {
-		/* empty urbs seem to happen, we ignore them */
-		/* dbg("%s - emtpy URB", __func__); */
-	       ;
-	} else if (urb->actual_length <= 2) {
-		dbg("%s - size %d URB not understood", __func__,
-		    urb->actual_length);
-		usb_serial_debug_data(debug, &port->dev, __func__,
-				      urb->actual_length, data);
-	} else {
-		int bytes_sent = ((__u8 *) data)[0] +
-				 ((unsigned int) ((__u8 *) data)[1] << 8);
-		tty = tty_port_tty_get(&port->port);
-		/* we should immediately resubmit the URB, before attempting
-		 * to pass the data on to the tty layer. But that needs locking
-		 * against re-entry an then mixed-up data because of
-		 * intermixed tty_flip_buffer_push()s
-		 * FIXME
-		 */
-		usb_serial_debug_data(debug, &port->dev, __func__,
-				      urb->actual_length, data);
-
-		if (bytes_sent + 2 > urb->actual_length) {
-			dbg("%s - trying to read more data than available"
-			    " (%d vs. %d)", __func__,
-			    bytes_sent+2, urb->actual_length);
-			/* cap at implied limit */
-			bytes_sent = urb->actual_length - 2;
-		}
-
-		tty_insert_flip_string(tty, data + 2, bytes_sent);
-		tty_flip_buffer_push(tty);
-		tty_kref_put(tty);
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
 
-		/* again lockless, but debug info only */
-		priv->bytes_in += bytes_sent;
+	len = get_unaligned_le16(data);
+	if (len > urb->actual_length - KLSI_HDR_LEN) {
+		dbg("%s - packet length mismatch", __func__);
+		len = urb->actual_length - KLSI_HDR_LEN;
 	}
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-		      usb_rcvbulkpipe(port->serial->dev,
-				      port->bulk_in_endpointAddress),
-		      port->read_urb->transfer_buffer,
-		      port->read_urb->transfer_buffer_length,
-		      klsi_105_read_bulk_callback,
-		      port);
-	rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-	if (rc)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, rc);
-} /* klsi_105_read_bulk_callback */
 
+	tty_insert_flip_string(tty, data + KLSI_HDR_LEN, len);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
 
 static void klsi_105_set_termios(struct tty_struct *tty,
 				 struct usb_serial_port *port,
@@ -887,8 +616,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	klsi_105_chg_port_settings(port, cfg);
 err:
 	kfree(cfg);
-} /* klsi_105_set_termios */
-
+}
 
 #if 0
 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
@@ -906,7 +634,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 		lcr |= MCT_U232_SET_BREAK;
 
 	mct_u232_set_line_ctrl(serial, lcr);
-} /* mct_u232_break_ctl */
+}
 #endif
 
 static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
@@ -962,29 +690,6 @@ static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 	return retval;
 }
 
-static void klsi_105_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s - port %d", __func__, port->number);
-	usb_kill_urb(port->read_urb);
-}
-
-static void klsi_105_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int result;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	port->read_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-}
-
-
 
 static int __init klsi_105_init(void)
 {
@@ -1005,7 +710,6 @@ failed_usb_serial_register:
 	return retval;
 }
 
-
 static void __exit klsi_105_exit(void)
 {
 	usb_deregister(&kl5kusb105d_driver);
@@ -1023,5 +727,3 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "enable extensive debugging messages");
-
-/* vim: set sts=8 ts=8 sw=8: */
diff --git a/drivers/usb/serial/kl5kusb105.h b/drivers/usb/serial/kl5kusb105.h
index 1231d9e7839..22a90badc86 100644
--- a/drivers/usb/serial/kl5kusb105.h
+++ b/drivers/usb/serial/kl5kusb105.h
@@ -17,16 +17,16 @@
 /* baud rates */
 
 enum {
-  kl5kusb105a_sio_b115200 = 0,
-  kl5kusb105a_sio_b57600  = 1,
-  kl5kusb105a_sio_b38400  = 2,
-  kl5kusb105a_sio_b19200  = 4,
-  kl5kusb105a_sio_b14400  = 5,
-  kl5kusb105a_sio_b9600   = 6,
-  kl5kusb105a_sio_b4800   = 8,   /* unchecked */
-  kl5kusb105a_sio_b2400   = 9,   /* unchecked */
-  kl5kusb105a_sio_b1200   = 0xa,  /* unchecked */
-  kl5kusb105a_sio_b600    = 0xb   /* unchecked */
+	kl5kusb105a_sio_b115200 = 0,
+	kl5kusb105a_sio_b57600  = 1,
+	kl5kusb105a_sio_b38400  = 2,
+	kl5kusb105a_sio_b19200  = 4,
+	kl5kusb105a_sio_b14400  = 5,
+	kl5kusb105a_sio_b9600   = 6,
+	kl5kusb105a_sio_b4800   = 8,	/* unchecked */
+	kl5kusb105a_sio_b2400   = 9,	/* unchecked */
+	kl5kusb105a_sio_b1200   = 0xa,	/* unchecked */
+	kl5kusb105a_sio_b600    = 0xb	/* unchecked */
 };
 
 /* data bits */
@@ -53,17 +53,16 @@ enum {
 #define KL5KUSB105A_CTS			((1<<5) | (1<<4))
 
 #define KL5KUSB105A_WANTS_TO_SEND	0x30
-//#define KL5KUSB105A_DTR			/* Data Terminal Ready */
-//#define KL5KUSB105A_CTS			/* Clear To Send */
-//#define KL5KUSB105A_CD			/* Carrier Detect */
-//#define KL5KUSB105A_DSR			/* Data Set Ready */
-//#define KL5KUSB105A_RxD			/* Receive pin */
-
-//#define KL5KUSB105A_LE
-//#define KL5KUSB105A_RTS		
-//#define KL5KUSB105A_ST		
-//#define KL5KUSB105A_SR		
-//#define KL5KUSB105A_RI			/* Ring Indicator */
-
-/* vim: set ts=8 sts=8: */
-
+#if 0
+#define KL5KUSB105A_DTR			/* Data Terminal Ready */
+#define KL5KUSB105A_CTS			/* Clear To Send */
+#define KL5KUSB105A_CD			/* Carrier Detect */
+#define KL5KUSB105A_DSR			/* Data Set Ready */
+#define KL5KUSB105A_RxD			/* Receive pin */
+
+#define KL5KUSB105A_LE
+#define KL5KUSB105A_RTS
+#define KL5KUSB105A_ST
+#define KL5KUSB105A_SR
+#define KL5KUSB105A_RI			/* Ring Indicator */
+#endif
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index c113a2a0e10..bd5bd8589e0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -345,7 +345,8 @@ static void kobil_close(struct usb_serial_port *port)
 
 	/* FIXME: Add rts/dtr methods */
 	if (port->write_urb) {
-		usb_kill_urb(port->write_urb);
+		usb_poison_urb(port->write_urb);
+		kfree(port->write_urb->transfer_buffer);
 		usb_free_urb(port->write_urb);
 		port->write_urb = NULL;
 	}
diff --git a/drivers/usb/serial/kobil_sct.h b/drivers/usb/serial/kobil_sct.h
index a51fbb5ae45..be207f7156f 100644
--- a/drivers/usb/serial/kobil_sct.h
+++ b/drivers/usb/serial/kobil_sct.h
@@ -23,38 +23,55 @@
 #define SUSBCR_SSL_SETDTR			0x0004
 #define SUSBCR_SSL_CLRDTR			0x0010
 
-#define SUSBCR_SSL_PURGE_TXABORT		0x0100  // Kill the pending/current writes to the comm port.
-#define SUSBCR_SSL_PURGE_RXABORT		0x0200  // Kill the pending/current reads to the comm port.
-#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400  // Kill the transmit queue if there.
-#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800  // Kill the typeahead buffer if there.
+/* Kill the pending/current writes to the comm port. */
+#define SUSBCR_SSL_PURGE_TXABORT		0x0100
+/* Kill the pending/current reads to the comm port. */
+#define SUSBCR_SSL_PURGE_RXABORT		0x0200
+/* Kill the transmit queue if there. */
+#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400
+/* Kill the typeahead buffer if there. */
+#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800
 
 #define SUSBCRequest_GetStatusLineState		4
-#define SUSBCR_GSL_RXCHAR			0x0001  // Any Character received
-#define SUSBCR_GSL_TXEMPTY			0x0004  // Transmitt Queue Empty
-#define SUSBCR_GSL_CTS				0x0008  // CTS changed state
-#define SUSBCR_GSL_DSR				0x0010  // DSR changed state
-#define SUSBCR_GSL_RLSD				0x0020  // RLSD changed state
-#define SUSBCR_GSL_BREAK			0x0040  // BREAK received
-#define SUSBCR_GSL_ERR				0x0080  // Line status error occurred
-#define SUSBCR_GSL_RING				0x0100  // Ring signal detected
+/* Any Character received */
+#define SUSBCR_GSL_RXCHAR			0x0001
+/* Transmitt Queue Empty */
+#define SUSBCR_GSL_TXEMPTY			0x0004
+/* CTS changed state */
+#define SUSBCR_GSL_CTS				0x0008
+/* DSR changed state */
+#define SUSBCR_GSL_DSR				0x0010
+/* RLSD changed state */
+#define SUSBCR_GSL_RLSD				0x0020
+/* BREAK received */
+#define SUSBCR_GSL_BREAK			0x0040
+/* Line status error occurred */
+#define SUSBCR_GSL_ERR				0x0080
+/* Ring signal detected */
+#define SUSBCR_GSL_RING				0x0100
 
 #define SUSBCRequest_Misc			8
-#define SUSBCR_MSC_ResetReader			0x0001	// use a predefined reset sequence
-#define SUSBCR_MSC_ResetAllQueues		0x0002	// use a predefined sequence to reset the internal queues
+/* use a predefined reset sequence */
+#define SUSBCR_MSC_ResetReader			0x0001
+/* use a predefined sequence to reset the internal queues */
+#define SUSBCR_MSC_ResetAllQueues		0x0002
 
 #define SUSBCRequest_GetMisc			0x10
-#define SUSBCR_MSC_GetFWVersion			0x0001	/* get the firmware version from device,
-							   coded like this 0xHHLLBBPP
-							   with HH = Firmware Version High Byte
-							   LL = Firmware Version Low Byte
-							   BB = Build Number
-							   PP = Further Attributes
-							*/
-
-#define SUSBCR_MSC_GetHWVersion			0x0002	/* get the hardware version from device
-							   coded like this 0xHHLLPPRR
-							   with HH = Software Version High Byte
-							   LL = Software Version Low Byte
-							   PP = Further Attributes
-							   RR = Reserved for the hardware ID 
-							*/
+
+/*
+ * get the firmware version from device, coded like this 0xHHLLBBPP with
+ * HH = Firmware Version High Byte
+ * LL = Firmware Version Low Byte
+ * BB = Build Number
+ * PP = Further Attributes
+ */
+#define SUSBCR_MSC_GetFWVersion			0x0001
+
+/*
+ * get the hardware version from device coded like this 0xHHLLPPRR with
+ * HH = Software Version High Byte
+ * LL = Software Version Low Byte
+ * PP = Further Attributes
+ * RR = Reserved for the hardware ID
+ */
+#define SUSBCR_MSC_GetHWVersion			0x0002
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 2849f8c3201..7aa01b95b1d 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -549,12 +549,9 @@ static void mct_u232_close(struct usb_serial_port *port)
 {
 	dbg("%s port %d", __func__, port->number);
 
-	if (port->serial->dev) {
-		/* shutdown our urbs */
-		usb_kill_urb(port->write_urb);
-		usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
+	if (port->serial->dev)
 		usb_kill_urb(port->interrupt_in_urb);
-	}
 } /* mct_u232_close */
 
 
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 7417d5ce1e2..3a3f5e6b8f9 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -42,36 +42,44 @@
 #define MCT_U232_SET_REQUEST_TYPE	0x40
 #define MCT_U232_GET_REQUEST_TYPE	0xc0
 
-#define MCT_U232_GET_MODEM_STAT_REQUEST 2  /* Get Modem Status Register (MSR) */
-#define MCT_U232_GET_MODEM_STAT_SIZE    1
+/* Get Modem Status Register (MSR) */
+#define MCT_U232_GET_MODEM_STAT_REQUEST	2
+#define MCT_U232_GET_MODEM_STAT_SIZE	1
 
-#define MCT_U232_GET_LINE_CTRL_REQUEST  6  /* Get Line Control Register (LCR) */
-#define MCT_U232_GET_LINE_CTRL_SIZE     1  /* ... not used by this driver */
+/* Get Line Control Register (LCR) */
+/* ... not used by this driver */
+#define MCT_U232_GET_LINE_CTRL_REQUEST	6
+#define MCT_U232_GET_LINE_CTRL_SIZE	1
 
-#define MCT_U232_SET_BAUD_RATE_REQUEST	5  /* Set Baud Rate Divisor */
-#define MCT_U232_SET_BAUD_RATE_SIZE     4
+/* Set Baud Rate Divisor */
+#define MCT_U232_SET_BAUD_RATE_REQUEST	5
+#define MCT_U232_SET_BAUD_RATE_SIZE	4
 
-#define MCT_U232_SET_LINE_CTRL_REQUEST	7  /* Set Line Control Register (LCR) */
-#define MCT_U232_SET_LINE_CTRL_SIZE     1
+/* Set Line Control Register (LCR) */
+#define MCT_U232_SET_LINE_CTRL_REQUEST	7
+#define MCT_U232_SET_LINE_CTRL_SIZE	1
 
-#define MCT_U232_SET_MODEM_CTRL_REQUEST	10 /* Set Modem Control Register (MCR) */
-#define MCT_U232_SET_MODEM_CTRL_SIZE    1
+/* Set Modem Control Register (MCR) */
+#define MCT_U232_SET_MODEM_CTRL_REQUEST	10
+#define MCT_U232_SET_MODEM_CTRL_SIZE	1
 
-/* This USB device request code is not well understood.  It is transmitted by
-   the MCT-supplied Windows driver whenever the baud rate changes. 
-*/
-#define MCT_U232_SET_UNKNOWN1_REQUEST   11  /* Unknown functionality */
-#define MCT_U232_SET_UNKNOWN1_SIZE       1
+/*
+ * This USB device request code is not well understood.  It is transmitted by
+ * the MCT-supplied Windows driver whenever the baud rate changes.
+ */
+#define MCT_U232_SET_UNKNOWN1_REQUEST	11  /* Unknown functionality */
+#define MCT_U232_SET_UNKNOWN1_SIZE	1
 
-/* This USB device request code appears to control whether CTS is required
-   during transmission.
-   
-   Sending a zero byte allows data transmission to a device which is not
-   asserting CTS.  Sending a '1' byte will cause transmission to be deferred
-   until the device asserts CTS.
-*/
-#define MCT_U232_SET_CTS_REQUEST   12
-#define MCT_U232_SET_CTS_SIZE       1
+/*
+ * This USB device request code appears to control whether CTS is required
+ * during transmission.
+ *
+ * Sending a zero byte allows data transmission to a device which is not
+ * asserting CTS.  Sending a '1' byte will cause transmission to be deferred
+ * until the device asserts CTS.
+ */
+#define MCT_U232_SET_CTS_REQUEST	12
+#define MCT_U232_SET_CTS_SIZE		1
 
 #define MCT_U232_MAX_SIZE		4	/* of MCT_XXX_SIZE */
 
@@ -81,7 +89,8 @@
  * and "Intel solution". They are the regular MCT and "Sitecom" for us.
  * This is pointless to document in the header, see the code for the bits.
  */
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result);
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
+					speed_t value, speed_t *result);
 
 /*
  * Line Control Register (LCR)
@@ -125,16 +134,16 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
 /*
  * Line Status Register (LSR)
  */
-#define MCT_U232_LSR_INDEX              1       /* data[index] */
-#define MCT_U232_LSR_ERR                0x80    /* OE | PE | FE | BI */
-#define MCT_U232_LSR_TEMT               0x40    /* transmit register empty */
-#define MCT_U232_LSR_THRE               0x20    /* transmit holding register empty */
-#define MCT_U232_LSR_BI                 0x10    /* break indicator */
-#define MCT_U232_LSR_FE                 0x08    /* framing error */
-#define MCT_U232_LSR_OE                 0x02    /* overrun error */
-#define MCT_U232_LSR_PE                 0x04    /* parity error */
-#define MCT_U232_LSR_OE                 0x02    /* overrun error */
-#define MCT_U232_LSR_DR                 0x01    /* receive data ready */
+#define MCT_U232_LSR_INDEX	1	/* data[index] */
+#define MCT_U232_LSR_ERR	0x80	/* OE | PE | FE | BI */
+#define MCT_U232_LSR_TEMT	0x40	/* transmit register empty */
+#define MCT_U232_LSR_THRE	0x20	/* transmit holding register empty */
+#define MCT_U232_LSR_BI		0x10	/* break indicator */
+#define MCT_U232_LSR_FE		0x08	/* framing error */
+#define MCT_U232_LSR_OE		0x02	/* overrun error */
+#define MCT_U232_LSR_PE		0x04	/* parity error */
+#define MCT_U232_LSR_OE		0x02	/* overrun error */
+#define MCT_U232_LSR_DR		0x01	/* receive data ready */
 
 
 /* -----------------------------------------------------------------------------
@@ -143,10 +152,10 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *
  *  The technical details of the device have been acquired be using "SniffUSB"
  *  and the vendor-supplied device driver (version 2.3A) under Windows98. To
- *  identify the USB vendor-specific requests and to assign them to terminal 
+ *  identify the USB vendor-specific requests and to assign them to terminal
  *  settings (flow control, baud rate, etc.) the program "SerialSettings" from
  *  William G. Greathouse has been proven to be very useful. I also used the
- *  Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and 
+ *  Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and
  *  observations are summarized below:
  *
  *  The USB requests seem to be directly mapped to the registers of a 8250,
@@ -186,33 +195,33 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *  Data:           LCR (see below)
  *
  *  Bit 7: Divisor Latch Access Bit (DLAB). When set, access to the data
- *  	   transmit/receive register (THR/RBR) and the Interrupt Enable Register
- *  	   (IER) is disabled. Any access to these ports is now redirected to the
- *  	   Divisor Latch Registers. Setting this bit, loading the Divisor
- *  	   Registers, and clearing DLAB should be done with interrupts disabled.
+ *	   transmit/receive register (THR/RBR) and the Interrupt Enable Register
+ *	   (IER) is disabled. Any access to these ports is now redirected to the
+ *	   Divisor Latch Registers. Setting this bit, loading the Divisor
+ *	   Registers, and clearing DLAB should be done with interrupts disabled.
  *  Bit 6: Set Break. When set to "1", the transmitter begins to transmit
- *  	   continuous Spacing until this bit is set to "0". This overrides any
- *  	   bits of characters that are being transmitted.
+ *	   continuous Spacing until this bit is set to "0". This overrides any
+ *	   bits of characters that are being transmitted.
  *  Bit 5: Stick Parity. When parity is enabled, setting this bit causes parity
- *  	   to always be "1" or "0", based on the value of Bit 4.
+ *	   to always be "1" or "0", based on the value of Bit 4.
  *  Bit 4: Even Parity Select (EPS). When parity is enabled and Bit 5 is "0",
- *  	   setting this bit causes even parity to be transmitted and expected.
- *  	   Otherwise, odd parity is used.
+ *	   setting this bit causes even parity to be transmitted and expected.
+ *	   Otherwise, odd parity is used.
  *  Bit 3: Parity Enable (PEN). When set to "1", a parity bit is inserted
- *  	   between the last bit of the data and the Stop Bit. The UART will also
- *  	   expect parity to be present in the received data.
+ *	   between the last bit of the data and the Stop Bit. The UART will also
+ *	   expect parity to be present in the received data.
  *  Bit 2: Number of Stop Bits (STB). If set to "1" and using 5-bit data words,
- *  	   1.5 Stop Bits are transmitted and expected in each data word. For
- *  	   6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
- *  	   When this bit is set to "0", one Stop Bit is used on each data word.
+ *	   1.5 Stop Bits are transmitted and expected in each data word. For
+ *	   6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
+ *	   When this bit is set to "0", one Stop Bit is used on each data word.
  *  Bit 1: Word Length Select Bit #1 (WLSB1)
  *  Bit 0: Word Length Select Bit #0 (WLSB0)
- *  	   Together these bits specify the number of bits in each data word.
- *  	     1 0  Word Length
- *  	     0 0  5 Data Bits
- *  	     0 1  6 Data Bits
- *  	     1 0  7 Data Bits
- *  	     1 1  8 Data Bits
+ *	   Together these bits specify the number of bits in each data word.
+ *	     1 0  Word Length
+ *	     0 0  5 Data Bits
+ *	     0 1  6 Data Bits
+ *	     1 0  7 Data Bits
+ *	     1 1  8 Data Bits
  *
  *  SniffUSB observations: Bit 7 seems not to be used. There seem to be two bugs
  *  in the Win98 driver: the break does not work (bit 6 is not asserted) and the
@@ -234,20 +243,20 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *  Bit 6: Reserved, always 0.
  *  Bit 5: Reserved, always 0.
  *  Bit 4: Loop-Back Enable. When set to "1", the UART transmitter and receiver
- *  	   are internally connected together to allow diagnostic operations. In
- *  	   addition, the UART modem control outputs are connected to the UART
- *  	   modem control inputs. CTS is connected to RTS, DTR is connected to
- *  	   DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
+ *	   are internally connected together to allow diagnostic operations. In
+ *	   addition, the UART modem control outputs are connected to the UART
+ *	   modem control inputs. CTS is connected to RTS, DTR is connected to
+ *	   DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
  *  Bit 3: OUT 2. An auxiliary output that the host processor may set high or
- *  	   low. In the IBM PC serial adapter (and most clones), OUT 2 is used
- *  	   to tri-state (disable) the interrupt signal from the
- *  	   8250/16450/16550 UART.
+ *	   low. In the IBM PC serial adapter (and most clones), OUT 2 is used
+ *	   to tri-state (disable) the interrupt signal from the
+ *	   8250/16450/16550 UART.
  *  Bit 2: OUT 1. An auxiliary output that the host processor may set high or
- *  	   low. This output is not used on the IBM PC serial adapter.
+ *	   low. This output is not used on the IBM PC serial adapter.
  *  Bit 1: Request to Send (RTS). When set to "1", the output of the UART -RTS
- *  	   line is Low (Active).
+ *	   line is Low (Active).
  *  Bit 0: Data Terminal Ready (DTR). When set to "1", the output of the UART
- *  	   -DTR line is Low (Active).
+ *	   -DTR line is Low (Active).
  *
  *  SniffUSB observations: Bit 2 and 4 seem not to be used but bit 3 has been
  *  seen _always_ set.
@@ -264,22 +273,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *  Data:           MSR (see below)
  *
  *  Bit 7: Data Carrier Detect (CD). Reflects the state of the DCD line on the
- *  	   UART.
+ *	   UART.
  *  Bit 6: Ring Indicator (RI). Reflects the state of the RI line on the UART.
  *  Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
  *  Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
  *  Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
- *  	   changed state one more more times since the last time the MSR was
- *  	   read by the host.
+ *	   changed state one more more times since the last time the MSR was
+ *	   read by the host.
  *  Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
- *  	   had a low to high transition since the last time the MSR was read by
- *  	   the host.
+ *	   had a low to high transition since the last time the MSR was read by
+ *	   the host.
  *  Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
- *  	   state one more more times since the last time the MSR was read by the
- *  	   host.
+ *	   state one more more times since the last time the MSR was read by the
+ *	   host.
  *  Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
- *  	   state one more times since the last time the MSR was read by the
- *  	   host.
+ *	   state one more times since the last time the MSR was read by the
+ *	   host.
  *
  *  SniffUSB observations: the MSR is also returned as first byte on the
  *  interrupt-in endpoint 0x83 to signal changes of modem status lines. The USB
@@ -290,31 +299,34 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  * --------------------------
  *
  *  Bit 7   Error in Receiver FIFO. On the 8250/16450 UART, this bit is zero.
- *  	    This bit is set to "1" when any of the bytes in the FIFO have one or
- *  	    more of the following error conditions: PE, FE, or BI.
+ *	    This bit is set to "1" when any of the bytes in the FIFO have one
+ *	    or more of the following error conditions: PE, FE, or BI.
  *  Bit 6   Transmitter Empty (TEMT). When set to "1", there are no words
- *  	    remaining in the transmit FIFO or the transmit shift register. The
- *  	    transmitter is completely idle.
- *  Bit 5   Transmitter Holding Register Empty (THRE). When set to "1", the FIFO
- *  	    (or holding register) now has room for at least one additional word
- *  	    to transmit. The transmitter may still be transmitting when this bit
- *  	    is set to "1".
+ *	    remaining in the transmit FIFO or the transmit shift register. The
+ *	    transmitter is completely idle.
+ *  Bit 5   Transmitter Holding Register Empty (THRE). When set to "1", the
+ *	    FIFO (or holding register) now has room for at least one additional
+ *	    word to transmit. The transmitter may still be transmitting when
+ *	    this bit is set to "1".
  *  Bit 4   Break Interrupt (BI). The receiver has detected a Break signal.
- *  Bit 3   Framing Error (FE). A Start Bit was detected but the Stop Bit did not
- *  	    appear at the expected time. The received word is probably garbled.
- *  Bit 2   Parity Error (PE). The parity bit was incorrect for the word received.
- *  Bit 1   Overrun Error (OE). A new word was received and there was no room in
- *  	    the receive buffer. The newly-arrived word in the shift register is
- *  	    discarded. On 8250/16450 UARTs, the word in the holding register is
- *  	    discarded and the newly- arrived word is put in the holding register.
+ *  Bit 3   Framing Error (FE). A Start Bit was detected but the Stop Bit did
+ *	    not appear at the expected time. The received word is probably
+ *	    garbled.
+ *  Bit 2   Parity Error (PE). The parity bit was incorrect for the word
+ *	    received.
+ *  Bit 1   Overrun Error (OE). A new word was received and there was no room
+ *	    in the receive buffer. The newly-arrived word in the shift register
+ *	    is discarded. On 8250/16450 UARTs, the word in the holding register
+ *	    is discarded and the newly- arrived word is put in the holding
+ *	    register.
  *  Bit 0   Data Ready (DR). One or more words are in the receive FIFO that the
- *  	    host may read. A word must be completely received and moved from the
- *  	    shift register into the FIFO (or holding register for 8250/16450
- *  	    designs) before this bit is set.
+ *	    host may read. A word must be completely received and moved from
+ *	    the shift register into the FIFO (or holding register for
+ *	    8250/16450 designs) before this bit is set.
  *
- *  SniffUSB observations: the LSR is returned as second byte on the interrupt-in
- *  endpoint 0x83 to signal error conditions. Such errors have been seen with
- *  minicom/zmodem transfers (CRC errors).
+ *  SniffUSB observations: the LSR is returned as second byte on the
+ *  interrupt-in endpoint 0x83 to signal error conditions. Such errors have
+ *  been seen with minicom/zmodem transfers (CRC errors).
  *
  *
  * Unknown #1
@@ -364,16 +376,16 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  * --------------
  *
  *  SniffUSB observations: the bulk-out endpoint 0x1 and interrupt-in endpoint
- *  0x81 is used to transmit and receive characters. The second interrupt-in 
- *  endpoint 0x83 signals exceptional conditions like modem line changes and 
+ *  0x81 is used to transmit and receive characters. The second interrupt-in
+ *  endpoint 0x83 signals exceptional conditions like modem line changes and
  *  errors. The first byte returned is the MSR and the second byte the LSR.
  *
  *
  * Other observations
  * ------------------
  *
- *  Queued bulk transfers like used in visor.c did not work. 
- *  
+ *  Queued bulk transfers like used in visor.c did not work.
+ *
  *
  * Properties of the USB device used (as found in /var/log/messages)
  * -----------------------------------------------------------------
@@ -411,26 +423,26 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *      bInterface Class:SubClass:Protocol =   00:00:00
  *      iInterface          =   00
  *      Endpoint:
- * 	  bLength             =    7
- * 	  bDescriptorType     =   05
- * 	  bEndpointAddress    =   81 (in)
- * 	  bmAttributes        =   03 (Interrupt)
- * 	  wMaxPacketSize      = 0040
- * 	  bInterval           =   02
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   81 (in)
+ *	  bmAttributes        =   03 (Interrupt)
+ *	  wMaxPacketSize      = 0040
+ *	  bInterval           =   02
  *      Endpoint:
- * 	  bLength             =    7
- * 	  bDescriptorType     =   05
- * 	  bEndpointAddress    =   01 (out)
- * 	  bmAttributes        =   02 (Bulk)
- * 	  wMaxPacketSize      = 0040
- * 	  bInterval           =   00
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   01 (out)
+ *	  bmAttributes        =   02 (Bulk)
+ *	  wMaxPacketSize      = 0040
+ *	  bInterval           =   00
  *      Endpoint:
- * 	  bLength             =    7
- * 	  bDescriptorType     =   05
- * 	  bEndpointAddress    =   83 (in)
- * 	  bmAttributes        =   03 (Interrupt)
- * 	  wMaxPacketSize      = 0002
- * 	  bInterval           =   02
+ *	  bLength             =    7
+ *	  bDescriptorType     =   05
+ *	  bEndpointAddress    =   83 (in)
+ *	  bmAttributes        =   03 (Interrupt)
+ *	  wMaxPacketSize      = 0002
+ *	  bInterval           =   02
  *
  *
  * Hardware details (added by Martin Hamilton, 2001/12/06)
@@ -440,7 +452,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  * adaptor, which turns out to simply be a re-badged U232-P9.  We
  * know this because there is a sticky label on the circuit board
  * which says "U232-P9" ;-)
- * 
+ *
  * The circuit board inside the adaptor contains a Philips PDIUSBD12
  * USB endpoint chip and a Philips P87C52UBAA microcontroller with
  * embedded UART.  Exhaustive documentation for these is available at:
@@ -449,7 +461,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
  *   http://www.semiconductors.philips.com/pip/pdiusbd12
  *
  * Thanks to Julian Highfield for the pointer to the Philips database.
- * 
+ *
  */
 
 #endif /* __LINUX_USB_SERIAL_MCT_U232_H */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 0d47f2c4d59..30922a7e334 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -34,21 +34,18 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
-
+#include <linux/parport.h>
 
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.0.0.4F"
+#define DRIVER_VERSION "2.1"
 #define DRIVER_AUTHOR "Aspire Communications pvt Ltd."
 #define DRIVER_DESC "Moschip USB Serial Driver"
 
 /* default urb timeout */
 #define MOS_WDR_TIMEOUT	(HZ * 5)
 
-#define MOS_PORT1	0x0200
-#define MOS_PORT2	0x0300
-#define MOS_VENREG	0x0000
 #define MOS_MAX_PORT	0x02
 #define MOS_WRITE	0x0E
 #define MOS_READ	0x0D
@@ -63,7 +60,7 @@
 #define NUM_URBS			16	/* URB Count */
 #define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size */
 
-/* This structure holds all of the local port information */
+/* This structure holds all of the local serial port information */
 struct moschip_port {
 	__u8	shadowLCR;		/* last LCR value received */
 	__u8	shadowMCR;		/* last MCR value received */
@@ -74,11 +71,6 @@ struct moschip_port {
 	struct urb		*write_urb_pool[NUM_URBS];
 };
 
-/* This structure holds all of the individual serial device information */
-struct moschip_serial {
-	int interrupt_started;
-};
-
 static int debug;
 
 static struct usb_serial_driver moschip7720_2port_driver;
@@ -94,6 +86,658 @@ static const struct usb_device_id moschip_port_id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
 
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+
+/* initial values for parport regs */
+#define DCR_INIT_VAL       0x0c	/* SLCTIN, nINIT */
+#define ECR_INIT_VAL       0x00	/* SPP mode */
+
+struct urbtracker {
+	struct mos7715_parport  *mos_parport;
+	struct list_head        urblist_entry;
+	struct kref             ref_count;
+	struct urb              *urb;
+};
+
+enum mos7715_pp_modes {
+	SPP = 0<<5,
+	PS2 = 1<<5,      /* moschip calls this 'NIBBLE' mode */
+	PPF = 2<<5,	 /* moschip calls this 'CB-FIFO mode */
+};
+
+struct mos7715_parport {
+	struct parport          *pp;	       /* back to containing struct */
+	struct kref             ref_count;     /* to instance of this struct */
+	struct list_head        deferred_urbs; /* list deferred async urbs */
+	struct list_head        active_urbs;   /* list async urbs in flight */
+	spinlock_t              listlock;      /* protects list access */
+	bool                    msg_pending;   /* usb sync call pending */
+	struct completion       syncmsg_compl; /* usb sync call completed */
+	struct tasklet_struct   urb_tasklet;   /* for sending deferred urbs */
+	struct usb_serial       *serial;       /* back to containing struct */
+	__u8	                shadowECR;     /* parallel port regs... */
+	__u8	                shadowDCR;
+	atomic_t                shadowDSR;     /* updated in int-in callback */
+};
+
+/* lock guards against dereferencing NULL ptr in parport ops callbacks */
+static DEFINE_SPINLOCK(release_lock);
+
+#endif	/* CONFIG_USB_SERIAL_MOS7715_PARPORT */
+
+static const unsigned int dummy; /* for clarity in register access fns */
+
+enum mos_regs {
+	THR,	          /* serial port regs */
+	RHR,
+	IER,
+	FCR,
+	ISR,
+	LCR,
+	MCR,
+	LSR,
+	MSR,
+	SPR,
+	DLL,
+	DLM,
+	DPR,              /* parallel port regs */
+	DSR,
+	DCR,
+	ECR,
+	SP1_REG,          /* device control regs */
+	SP2_REG,          /* serial port 2 (7720 only) */
+	PP_REG,
+	SP_CONTROL_REG,
+};
+
+/*
+ * Return the correct value for the Windex field of the setup packet
+ * for a control endpoint message.  See the 7715 datasheet.
+ */
+static inline __u16 get_reg_index(enum mos_regs reg)
+{
+	static const __u16 mos7715_index_lookup_table[] = {
+		0x00,		/* THR */
+		0x00,		/* RHR */
+		0x01,		/* IER */
+		0x02,		/* FCR */
+		0x02,		/* ISR */
+		0x03,		/* LCR */
+		0x04,		/* MCR */
+		0x05,		/* LSR */
+		0x06,		/* MSR */
+		0x07,		/* SPR */
+		0x00,		/* DLL */
+		0x01,		/* DLM */
+		0x00,		/* DPR */
+		0x01,		/* DSR */
+		0x02,		/* DCR */
+		0x0a,		/* ECR */
+		0x01,		/* SP1_REG */
+		0x02,		/* SP2_REG (7720 only) */
+		0x04,		/* PP_REG (7715 only) */
+		0x08,		/* SP_CONTROL_REG */
+	};
+	return mos7715_index_lookup_table[reg];
+}
+
+/*
+ * Return the correct value for the upper byte of the Wvalue field of
+ * the setup packet for a control endpoint message.
+ */
+static inline __u16 get_reg_value(enum mos_regs reg,
+				  unsigned int serial_portnum)
+{
+	if (reg >= SP1_REG)	      /* control reg */
+		return 0x0000;
+
+	else if (reg >= DPR)	      /* parallel port reg (7715 only) */
+		return 0x0100;
+
+	else			      /* serial port reg */
+		return (serial_portnum + 2) << 8;
+}
+
+/*
+ * Write data byte to the specified device register.  The data is embedded in
+ * the value field of the setup packet. serial_portnum is ignored for registers
+ * not specific to a particular serial port.
+ */
+static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
+			 enum mos_regs reg, __u8 data)
+{
+	struct usb_device *usbdev = serial->dev;
+	unsigned int pipe = usb_sndctrlpipe(usbdev, 0);
+	__u8 request = (__u8)0x0e;
+	__u8 requesttype = (__u8)0x40;
+	__u16 index = get_reg_index(reg);
+	__u16 value = get_reg_value(reg, serial_portnum) + data;
+	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, NULL, 0, MOS_WDR_TIMEOUT);
+	if (status < 0)
+		dev_err(&usbdev->dev,
+			"mos7720: usb_control_msg() failed: %d", status);
+	return status;
+}
+
+/*
+ * Read data byte from the specified device register.  The data returned by the
+ * device is embedded in the value field of the setup packet.  serial_portnum is
+ * ignored for registers that are not specific to a particular serial port.
+ */
+static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
+			enum mos_regs reg, __u8 *data)
+{
+	struct usb_device *usbdev = serial->dev;
+	unsigned int pipe = usb_rcvctrlpipe(usbdev, 0);
+	__u8 request = (__u8)0x0d;
+	__u8 requesttype = (__u8)0xc0;
+	__u16 index = get_reg_index(reg);
+	__u16 value = get_reg_value(reg, serial_portnum);
+	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, data, 1, MOS_WDR_TIMEOUT);
+	if (status < 0)
+		dev_err(&usbdev->dev,
+			"mos7720: usb_control_msg() failed: %d", status);
+	return status;
+}
+
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+
+static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
+				      enum mos7715_pp_modes mode)
+{
+	mos_parport->shadowECR = mode;
+	write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+	return 0;
+}
+
+static void destroy_mos_parport(struct kref *kref)
+{
+	struct mos7715_parport *mos_parport =
+		container_of(kref, struct mos7715_parport, ref_count);
+
+	dbg("%s called", __func__);
+	kfree(mos_parport);
+}
+
+static void destroy_urbtracker(struct kref *kref)
+{
+	struct urbtracker *urbtrack =
+		container_of(kref, struct urbtracker, ref_count);
+	struct mos7715_parport *mos_parport = urbtrack->mos_parport;
+	dbg("%s called", __func__);
+	usb_free_urb(urbtrack->urb);
+	kfree(urbtrack);
+	kref_put(&mos_parport->ref_count, destroy_mos_parport);
+}
+
+/*
+ * This runs as a tasklet when sending an urb in a non-blocking parallel
+ * port callback had to be deferred because the disconnect mutex could not be
+ * obtained at the time.
+ */
+static void send_deferred_urbs(unsigned long _mos_parport)
+{
+	int ret_val;
+	unsigned long flags;
+	struct mos7715_parport *mos_parport = (void *)_mos_parport;
+	struct urbtracker *urbtrack;
+	struct list_head *cursor, *next;
+
+	dbg("%s called", __func__);
+
+	/* if release function ran, game over */
+	if (unlikely(mos_parport->serial == NULL))
+		return;
+
+	/* try again to get the mutex */
+	if (!mutex_trylock(&mos_parport->serial->disc_mutex)) {
+		dbg("%s: rescheduling tasklet", __func__);
+		tasklet_schedule(&mos_parport->urb_tasklet);
+		return;
+	}
+
+	/* if device disconnected, game over */
+	if (unlikely(mos_parport->serial->disconnected)) {
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		return;
+	}
+
+	spin_lock_irqsave(&mos_parport->listlock, flags);
+	if (list_empty(&mos_parport->deferred_urbs)) {
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		dbg("%s: deferred_urbs list empty", __func__);
+		return;
+	}
+
+	/* move contents of deferred_urbs list to active_urbs list and submit */
+	list_for_each_safe(cursor, next, &mos_parport->deferred_urbs)
+		list_move_tail(cursor, &mos_parport->active_urbs);
+	list_for_each_entry(urbtrack, &mos_parport->active_urbs,
+			    urblist_entry) {
+		ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC);
+		dbg("%s: urb submitted", __func__);
+		if (ret_val) {
+			dev_err(&mos_parport->serial->dev->dev,
+				"usb_submit_urb() failed: %d", ret_val);
+			list_del(&urbtrack->urblist_entry);
+			kref_put(&urbtrack->ref_count, destroy_urbtracker);
+		}
+	}
+	spin_unlock_irqrestore(&mos_parport->listlock, flags);
+	mutex_unlock(&mos_parport->serial->disc_mutex);
+}
+
+/* callback for parallel port control urbs submitted asynchronously */
+static void async_complete(struct urb *urb)
+{
+	struct urbtracker *urbtrack = urb->context;
+	int status = urb->status;
+	dbg("%s called", __func__);
+	if (unlikely(status))
+		dbg("%s - nonzero urb status received: %d", __func__, status);
+
+	/* remove the urbtracker from the active_urbs list */
+	spin_lock(&urbtrack->mos_parport->listlock);
+	list_del(&urbtrack->urblist_entry);
+	spin_unlock(&urbtrack->mos_parport->listlock);
+	kref_put(&urbtrack->ref_count, destroy_urbtracker);
+}
+
+static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
+				      enum mos_regs reg, __u8 data)
+{
+	struct urbtracker *urbtrack;
+	int ret_val;
+	unsigned long flags;
+	struct usb_ctrlrequest setup;
+	struct usb_serial *serial = mos_parport->serial;
+	struct usb_device *usbdev = serial->dev;
+	dbg("%s called", __func__);
+
+	/* create and initialize the control urb and containing urbtracker */
+	urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC);
+	if (urbtrack == NULL) {
+		dev_err(&usbdev->dev, "out of memory");
+		return -ENOMEM;
+	}
+	kref_get(&mos_parport->ref_count);
+	urbtrack->mos_parport = mos_parport;
+	urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (urbtrack->urb == NULL) {
+		dev_err(&usbdev->dev, "out of urbs");
+		kfree(urbtrack);
+		return -ENOMEM;
+	}
+	setup.bRequestType = (__u8)0x40;
+	setup.bRequest = (__u8)0x0e;
+	setup.wValue = get_reg_value(reg, dummy);
+	setup.wIndex = get_reg_index(reg);
+	setup.wLength = 0;
+	usb_fill_control_urb(urbtrack->urb, usbdev,
+			     usb_sndctrlpipe(usbdev, 0),
+			     (unsigned char *)&setup,
+			     NULL, 0, async_complete, urbtrack);
+	kref_init(&urbtrack->ref_count);
+	INIT_LIST_HEAD(&urbtrack->urblist_entry);
+
+	/*
+	 * get the disconnect mutex, or add tracker to the deferred_urbs list
+	 * and schedule a tasklet to try again later
+	 */
+	if (!mutex_trylock(&serial->disc_mutex)) {
+		spin_lock_irqsave(&mos_parport->listlock, flags);
+		list_add_tail(&urbtrack->urblist_entry,
+			      &mos_parport->deferred_urbs);
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		tasklet_schedule(&mos_parport->urb_tasklet);
+		dbg("tasklet scheduled");
+		return 0;
+	}
+
+	/* bail if device disconnected */
+	if (serial->disconnected) {
+		kref_put(&urbtrack->ref_count, destroy_urbtracker);
+		mutex_unlock(&serial->disc_mutex);
+		return -ENODEV;
+	}
+
+	/* add the tracker to the active_urbs list and submit */
+	spin_lock_irqsave(&mos_parport->listlock, flags);
+	list_add_tail(&urbtrack->urblist_entry, &mos_parport->active_urbs);
+	spin_unlock_irqrestore(&mos_parport->listlock, flags);
+	ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC);
+	mutex_unlock(&serial->disc_mutex);
+	if (ret_val) {
+		dev_err(&usbdev->dev,
+			"%s: submit_urb() failed: %d", __func__, ret_val);
+		spin_lock_irqsave(&mos_parport->listlock, flags);
+		list_del(&urbtrack->urblist_entry);
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+		kref_put(&urbtrack->ref_count, destroy_urbtracker);
+		return ret_val;
+	}
+	return 0;
+}
+
+/*
+ * This is the the common top part of all parallel port callback operations that
+ * send synchronous messages to the device.  This implements convoluted locking
+ * that avoids two scenarios: (1) a port operation is called after usbserial
+ * has called our release function, at which point struct mos7715_parport has
+ * been destroyed, and (2) the device has been disconnected, but usbserial has
+ * not called the release function yet because someone has a serial port open.
+ * The shared release_lock prevents the first, and the mutex and disconnected
+ * flag maintained by usbserial covers the second.  We also use the msg_pending
+ * flag to ensure that all synchronous usb messgage calls have completed before
+ * our release function can return.
+ */
+static int parport_prologue(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport;
+
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {
+		/* release fn called, port struct destroyed */
+		spin_unlock(&release_lock);
+		return -1;
+	}
+	mos_parport->msg_pending = true;   /* synch usb call pending */
+	INIT_COMPLETION(mos_parport->syncmsg_compl);
+	spin_unlock(&release_lock);
+
+	mutex_lock(&mos_parport->serial->disc_mutex);
+	if (mos_parport->serial->disconnected) {
+		/* device disconnected */
+		mutex_unlock(&mos_parport->serial->disc_mutex);
+		mos_parport->msg_pending = false;
+		complete(&mos_parport->syncmsg_compl);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * This is the the common bottom part of all parallel port functions that send
+ * synchronous messages to the device.
+ */
+static inline void parport_epilogue(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	mutex_unlock(&mos_parport->serial->disc_mutex);
+	mos_parport->msg_pending = false;
+	complete(&mos_parport->syncmsg_compl);
+}
+
+static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called: %2.2x", __func__, d);
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, SPP);
+	write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d);
+	parport_epilogue(pp);
+}
+
+static unsigned char parport_mos7715_read_data(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	unsigned char d;
+	dbg("%s called", __func__);
+	if (parport_prologue(pp) < 0)
+		return 0;
+	read_mos_reg(mos_parport->serial, dummy, DPR, &d);
+	parport_epilogue(pp);
+	return d;
+}
+
+static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 data;
+	dbg("%s called: %2.2x", __func__, d);
+	if (parport_prologue(pp) < 0)
+		return;
+	data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
+	write_mos_reg(mos_parport->serial, dummy, DCR, data);
+	mos_parport->shadowDCR = data;
+	parport_epilogue(pp);
+}
+
+static unsigned char parport_mos7715_read_control(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 dcr;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {
+		spin_unlock(&release_lock);
+		return 0;
+	}
+	dcr = mos_parport->shadowDCR & 0x0f;
+	spin_unlock(&release_lock);
+	return dcr;
+}
+
+static unsigned char parport_mos7715_frob_control(struct parport *pp,
+						  unsigned char mask,
+						  unsigned char val)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	__u8 dcr;
+	dbg("%s called", __func__);
+	mask &= 0x0f;
+	val &= 0x0f;
+	if (parport_prologue(pp) < 0)
+		return 0;
+	mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	dcr = mos_parport->shadowDCR & 0x0f;
+	parport_epilogue(pp);
+	return dcr;
+}
+
+static unsigned char parport_mos7715_read_status(struct parport *pp)
+{
+	unsigned char status;
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return 0;
+	}
+	status = atomic_read(&mos_parport->shadowDSR) & 0xf8;
+	spin_unlock(&release_lock);
+	return status;
+}
+
+static void parport_mos7715_enable_irq(struct parport *pp)
+{
+	dbg("%s called", __func__);
+}
+static void parport_mos7715_disable_irq(struct parport *pp)
+{
+	dbg("%s called", __func__);
+}
+
+static void parport_mos7715_data_forward(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called", __func__);
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, PS2);
+	mos_parport->shadowDCR &=  ~0x20;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	parport_epilogue(pp);
+}
+
+static void parport_mos7715_data_reverse(struct parport *pp)
+{
+	struct mos7715_parport *mos_parport = pp->private_data;
+	dbg("%s called", __func__);
+	if (parport_prologue(pp) < 0)
+		return;
+	mos7715_change_mode(mos_parport, PS2);
+	mos_parport->shadowDCR |= 0x20;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	parport_epilogue(pp);
+}
+
+static void parport_mos7715_init_state(struct pardevice *dev,
+				       struct parport_state *s)
+{
+	dbg("%s called", __func__);
+	s->u.pc.ctr = DCR_INIT_VAL;
+	s->u.pc.ecr = ECR_INIT_VAL;
+}
+
+/* N.B. Parport core code requires that this function not block */
+static void parport_mos7715_save_state(struct parport *pp,
+				       struct parport_state *s)
+{
+	struct mos7715_parport *mos_parport;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return;
+	}
+	s->u.pc.ctr = mos_parport->shadowDCR;
+	s->u.pc.ecr = mos_parport->shadowECR;
+	spin_unlock(&release_lock);
+}
+
+/* N.B. Parport core code requires that this function not block */
+static void parport_mos7715_restore_state(struct parport *pp,
+					  struct parport_state *s)
+{
+	struct mos7715_parport *mos_parport;
+	dbg("%s called", __func__);
+	spin_lock(&release_lock);
+	mos_parport = pp->private_data;
+	if (unlikely(mos_parport == NULL)) {	/* release called */
+		spin_unlock(&release_lock);
+		return;
+	}
+	write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR);
+	write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR);
+	spin_unlock(&release_lock);
+}
+
+static size_t parport_mos7715_write_compat(struct parport *pp,
+					   const void *buffer,
+					   size_t len, int flags)
+{
+	int retval;
+	struct mos7715_parport *mos_parport = pp->private_data;
+	int actual_len;
+	dbg("%s called: %u chars", __func__, (unsigned int)len);
+	if (parport_prologue(pp) < 0)
+		return 0;
+	mos7715_change_mode(mos_parport, PPF);
+	retval = usb_bulk_msg(mos_parport->serial->dev,
+			      usb_sndbulkpipe(mos_parport->serial->dev, 2),
+			      (void *)buffer, len, &actual_len,
+			      MOS_WDR_TIMEOUT);
+	parport_epilogue(pp);
+	if (retval) {
+		dev_err(&mos_parport->serial->dev->dev,
+			"mos7720: usb_bulk_msg() failed: %d", retval);
+		return 0;
+	}
+	return actual_len;
+}
+
+static struct parport_operations parport_mos7715_ops = {
+	.owner =		THIS_MODULE,
+	.write_data =		parport_mos7715_write_data,
+	.read_data =		parport_mos7715_read_data,
+
+	.write_control =	parport_mos7715_write_control,
+	.read_control =		parport_mos7715_read_control,
+	.frob_control =		parport_mos7715_frob_control,
+
+	.read_status =		parport_mos7715_read_status,
+
+	.enable_irq =		parport_mos7715_enable_irq,
+	.disable_irq =		parport_mos7715_disable_irq,
+
+	.data_forward =		parport_mos7715_data_forward,
+	.data_reverse =		parport_mos7715_data_reverse,
+
+	.init_state =		parport_mos7715_init_state,
+	.save_state =		parport_mos7715_save_state,
+	.restore_state =	parport_mos7715_restore_state,
+
+	.compat_write_data =	parport_mos7715_write_compat,
+
+	.nibble_read_data =	parport_ieee1284_read_nibble,
+	.byte_read_data =	parport_ieee1284_read_byte,
+};
+
+/*
+ * Allocate and initialize parallel port control struct, initialize
+ * the parallel port hardware device, and register with the parport subsystem.
+ */
+static int mos7715_parport_init(struct usb_serial *serial)
+{
+	struct mos7715_parport *mos_parport;
+
+	/* allocate and initialize parallel port control struct */
+	mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL);
+	if (mos_parport == NULL) {
+		dbg("mos7715_parport_init: kzalloc failed");
+		return -ENOMEM;
+	}
+	mos_parport->msg_pending = false;
+	kref_init(&mos_parport->ref_count);
+	spin_lock_init(&mos_parport->listlock);
+	INIT_LIST_HEAD(&mos_parport->active_urbs);
+	INIT_LIST_HEAD(&mos_parport->deferred_urbs);
+	usb_set_serial_data(serial, mos_parport); /* hijack private pointer */
+	mos_parport->serial = serial;
+	tasklet_init(&mos_parport->urb_tasklet, send_deferred_urbs,
+		     (unsigned long) mos_parport);
+	init_completion(&mos_parport->syncmsg_compl);
+
+	/* cycle parallel port reset bit */
+	write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80);
+	write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00);
+
+	/* initialize device registers */
+	mos_parport->shadowDCR = DCR_INIT_VAL;
+	write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+	mos_parport->shadowECR = ECR_INIT_VAL;
+	write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+
+	/* register with parport core */
+	mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
+						PARPORT_DMA_NONE,
+						&parport_mos7715_ops);
+	if (mos_parport->pp == NULL) {
+		dev_err(&serial->interface->dev,
+			"Could not register parport\n");
+		kref_put(&mos_parport->ref_count, destroy_mos_parport);
+		return -EIO;
+	}
+	mos_parport->pp->private_data = mos_parport;
+	mos_parport->pp->modes = PARPORT_MODE_COMPAT | PARPORT_MODE_PCSPP;
+	mos_parport->pp->dev = &serial->interface->dev;
+	parport_announce_port(mos_parport->pp);
+
+	return 0;
+}
+#endif	/* CONFIG_USB_SERIAL_MOS7715_PARPORT */
 
 /*
  * mos7720_interrupt_callback
@@ -109,8 +753,6 @@ static void mos7720_interrupt_callback(struct urb *urb)
 	__u8 sp1;
 	__u8 sp2;
 
-	dbg(" : Entering");
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -161,7 +803,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 			dbg("Serial Port 1: Receiver time out");
 			break;
 		case SERIAL_IIR_MS:
-			dbg("Serial Port 1: Modem status change");
+			/* dbg("Serial Port 1: Modem status change"); */
 			break;
 		}
 
@@ -174,7 +816,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 			dbg("Serial Port 2: Receiver time out");
 			break;
 		case SERIAL_IIR_MS:
-			dbg("Serial Port 2: Modem status change");
+			/* dbg("Serial Port 2: Modem status change"); */
 			break;
 		}
 	}
@@ -208,6 +850,7 @@ static void mos7715_interrupt_callback(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
+	case -ENODEV:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d", __func__,
 		    status);
@@ -243,11 +886,21 @@ static void mos7715_interrupt_callback(struct urb *urb)
 			dbg("Serial Port: Receiver time out");
 			break;
 		case SERIAL_IIR_MS:
-			dbg("Serial Port: Modem status change");
+			/* dbg("Serial Port: Modem status change"); */
 			break;
 		}
 	}
 
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	{       /* update local copy of DSR reg */
+		struct usb_serial_port *port = urb->context;
+		struct mos7715_parport *mos_parport = port->serial->private;
+		if (unlikely(mos_parport == NULL))
+			return;
+		atomic_set(&mos_parport->shadowDSR, data[2]);
+	}
+#endif
+
 exit:
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
@@ -267,7 +920,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 	int retval;
 	unsigned char *data ;
 	struct usb_serial_port *port;
-	struct moschip_port *mos7720_port;
 	struct tty_struct *tty;
 	int status = urb->status;
 
@@ -276,13 +928,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	mos7720_port = urb->context;
-	if (!mos7720_port) {
-		dbg("NULL mos7720_port pointer");
-		return ;
-	}
-
-	port = mos7720_port->port;
+	port = urb->context;
 
 	dbg("Entering...%s", __func__);
 
@@ -332,8 +978,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 		return ;
 	}
 
-	dbg("Entering .........");
-
 	tty = tty_port_tty_get(&mos7720_port->port->port);
 
 	if (tty && mos7720_port->open)
@@ -342,56 +986,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 }
 
 /*
- * send_mos_cmd
- *	this function will be used for sending command to device
- */
-static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
-			__u16 index, u8 *data)
-{
-	int status;
-	u8 *buf;
-	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
-
-	if (value < MOS_MAX_PORT) {
-		if (product == MOSCHIP_DEVICE_ID_7715)
-			value = 0x0200; /* identifies the 7715's serial port */
-		else
-			value = value*0x100+0x200;
-	} else {
-		value = 0x0000;
-		if ((product == MOSCHIP_DEVICE_ID_7715) &&
-		    (index != 0x08)) {
-			dbg("serial->product== MOSCHIP_DEVICE_ID_7715");
-			/* index = 0x01 ; */
-		}
-	}
-
-	if (request == MOS_WRITE) {
-		value = value + *data;
-		status = usb_control_msg(serial->dev,
-				usb_sndctrlpipe(serial->dev, 0), MOS_WRITE,
-				0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT);
-	} else {
-		buf = kmalloc(1, GFP_KERNEL);
-		if (!buf) {
-			status = -ENOMEM;
-			goto out;
-		}
-		status = usb_control_msg(serial->dev,
-				usb_rcvctrlpipe(serial->dev, 0), MOS_READ,
-				0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT);
-		*data = *buf;
-		kfree(buf);
-	}
-out:
-	if (status < 0)
-		dbg("Command Write failed Value %x index %x", value, index);
-
-	return status;
-}
-
-
-/*
  * mos77xx_probe
  *	this function installs the appropriate read interrupt endpoint callback
  *	depending on whether the device is a 7720 or 7715, thus avoiding costly
@@ -424,11 +1018,10 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
 	struct urb *urb;
-	struct moschip_serial *mos7720_serial;
 	struct moschip_port *mos7720_port;
 	int response;
 	int port_number;
-	char data;
+	__u8 data;
 	int allocated_urbs = 0;
 	int j;
 
@@ -440,11 +1033,6 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	port0 = serial->port[0];
 
-	mos7720_serial = usb_get_serial_data(serial);
-
-	if (mos7720_serial == NULL || port0 == NULL)
-		return -ENODEV;
-
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
@@ -489,103 +1077,36 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	  * 0x08 : SP1/2 Control Reg
 	  */
 	port_number = port->number - port->serial->minor;
-	send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
+	read_mos_reg(serial, port_number, LSR, &data);
+
 	dbg("SS::%p LSR:%x", mos7720_port, data);
 
 	dbg("Check:Sending Command ..........");
 
-	data = 0x02;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x01, &data);
-	data = 0x02;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x02, &data);
+	write_mos_reg(serial, dummy, SP1_REG, 0x02);
+	write_mos_reg(serial, dummy, SP2_REG, 0x02);
 
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
+	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0x00);
 
-	data = 0xCF;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
-	data = 0x03;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-	data = 0x0b;
-	mos7720_port->shadowMCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x0b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-
-	data = 0x00;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
-
-/*	data = 0x00;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, port_number + 1, &data);
-	data = 0x03;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
-	data = 0x00;
-	send_mos_cmd(port->serial, MOS_WRITE, MOS_MAX_PORT,
-						port_number + 1, &data);
-*/
-	data = 0x00;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
+	write_mos_reg(serial, port_number, FCR, 0xcf);
+	mos7720_port->shadowLCR = 0x03;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
+	write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
+	read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
 	data = data | (port->number - port->serial->minor + 1);
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
+	write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
+	mos7720_port->shadowLCR = 0x83;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, THR, 0x0c);
+	write_mos_reg(serial, port_number, IER, 0x00);
+	mos7720_port->shadowLCR = 0x03;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, IER, 0x0c);
 
-	data = 0x83;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x03;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-
-	/* see if we've set up our endpoint info yet   *
-	 * (can't set it up in mos7720_startup as the  *
-	 * structures were not set up at that time.)   */
-	if (!mos7720_serial->interrupt_started) {
-		dbg("Interrupt buffer NULL !!!");
-
-		/* not set up yet, so do it now */
-		mos7720_serial->interrupt_started = 1;
-
-		dbg("To Submit URB !!!");
-
-		/* set up our interrupt urb */
-		usb_fill_int_urb(port0->interrupt_in_urb, serial->dev,
-			 usb_rcvintpipe(serial->dev,
-				port->interrupt_in_endpointAddress),
-			 port0->interrupt_in_buffer,
-			 port0->interrupt_in_urb->transfer_buffer_length,
-			 mos7720_interrupt_callback, mos7720_port,
-			 port0->interrupt_in_urb->interval);
-
-		/* start interrupt read for this mos7720 this interrupt *
-		 * will continue as long as the mos7720 is connected    */
-		dbg("Submit URB over !!!");
-		response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
-		if (response)
-			dev_err(&port->dev,
-				"%s - Error %d submitting control urb\n",
-				__func__, response);
-	}
-
-	/* set up our bulk in urb */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			  usb_rcvbulkpipe(serial->dev,
-				port->bulk_in_endpointAddress),
-			  port->bulk_in_buffer,
-			  port->read_urb->transfer_buffer_length,
-			  mos7720_bulk_in_callback, mos7720_port);
 	response = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (response)
 		dev_err(&port->dev, "%s - Error %d submitting read urb\n",
@@ -640,7 +1161,6 @@ static void mos7720_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
-	char data;
 	int j;
 
 	dbg("mos7720_close:entering...");
@@ -673,13 +1193,10 @@ static void mos7720_close(struct usb_serial_port *port)
 	/* these commands must not be issued if the device has
 	 * been disconnected */
 	if (!serial->disconnected) {
-		data = 0x00;
-		send_mos_cmd(serial, MOS_WRITE,
-			port->number - port->serial->minor, 0x04, &data);
-
-		data = 0x00;
-		send_mos_cmd(serial, MOS_WRITE,
-			port->number - port->serial->minor, 0x01, &data);
+		write_mos_reg(serial, port->number - port->serial->minor,
+			      MCR, 0x00);
+		write_mos_reg(serial, port->number - port->serial->minor,
+			      IER, 0x00);
 	}
 	mutex_unlock(&serial->disc_mutex);
 	mos7720_port->open = 0;
@@ -708,8 +1225,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
 		data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
 
 	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
-		     0x03, &data);
+	write_mos_reg(serial, port->number - port->serial->minor,
+		      LCR, mos7720_port->shadowLCR);
 
 	return;
 }
@@ -854,9 +1371,8 @@ static void mos7720_throttle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR &= ~UART_MCR_RTS;
-		status = send_mos_cmd(port->serial, MOS_WRITE,
-				      port->number - port->serial->minor,
-				      UART_MCR, &mos7720_port->shadowMCR);
+		write_mos_reg(port->serial, port->number - port->serial->minor,
+			      MCR, mos7720_port->shadowMCR);
 		if (status != 0)
 			return;
 	}
@@ -889,22 +1405,21 @@ static void mos7720_unthrottle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR |= UART_MCR_RTS;
-		status = send_mos_cmd(port->serial, MOS_WRITE,
-				      port->number - port->serial->minor,
-				      UART_MCR, &mos7720_port->shadowMCR);
+		write_mos_reg(port->serial, port->number - port->serial->minor,
+			      MCR, mos7720_port->shadowMCR);
 		if (status != 0)
 			return;
 	}
 }
 
+/* FIXME: this function does not work */
 static int set_higher_rates(struct moschip_port *mos7720_port,
 			    unsigned int baud)
 {
-	unsigned char data;
 	struct usb_serial_port *port;
 	struct usb_serial *serial;
 	int port_number;
-
+	enum mos_regs sp_reg;
 	if (mos7720_port == NULL)
 		return -EINVAL;
 
@@ -917,58 +1432,35 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	dbg("Sending Setting Commands ..........");
 	port_number = port->number - port->serial->minor;
 
-	data = 0x000;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-	data = 0x000;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x02, &data);
-	data = 0x0CF;
-	send_mos_cmd(serial, MOS_WRITE, port->number, 0x02, &data);
-	data = 0x00b;
-	mos7720_port->shadowMCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x00b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-
-	data = 0x000;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
-	data = 0x000;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
-
+	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0xcf);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+	write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00);
 
 	/***********************************************
 	 *              Set for higher rates           *
 	 ***********************************************/
-
-	data = baud * 0x10;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, port_number + 1, &data);
-
-	data = 0x003;
-	send_mos_cmd(serial, MOS_READ, MOS_MAX_PORT, 0x08, &data);
-	data = 0x003;
-	send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT, 0x08, &data);
-
-	data = 0x02b;
-	mos7720_port->shadowMCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x02b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+	/* writing baud rate verbatum into uart clock field clearly not right */
+	if (port_number == 0)
+		sp_reg = SP1_REG;
+	else
+		sp_reg = SP2_REG;
+	write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
+	write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03);
+	mos7720_port->shadowMCR = 0x2b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
 	/***********************************************
 	 *              Set DLL/DLM
 	 ***********************************************/
-
-	data = mos7720_port->shadowLCR | UART_LCR_DLAB;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
-
-	data =  0x001; /* DLL */
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x00, &data);
-	data =  0x000; /* DLM */
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
-
-	data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x03, &data);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port_number, DLL, 0x01);
+	write_mos_reg(serial, port_number, DLM, 0x00);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
 
 	return 0;
 }
@@ -1056,7 +1548,6 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	struct usb_serial *serial;
 	int divisor;
 	int status;
-	unsigned char data;
 	unsigned char number;
 
 	if (mos7720_port == NULL)
@@ -1078,21 +1569,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	}
 
 	/* Enable access to divisor latch */
-	data = mos7720_port->shadowLCR | UART_LCR_DLAB;
-	mos7720_port->shadowLCR  = data;
-	send_mos_cmd(serial, MOS_WRITE, number, UART_LCR, &data);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
+	write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
 
 	/* Write the divisor */
-	data = ((unsigned char)(divisor & 0xff));
-	send_mos_cmd(serial, MOS_WRITE, number, 0x00, &data);
-
-	data = ((unsigned char)((divisor & 0xff00) >> 8));
-	send_mos_cmd(serial, MOS_WRITE, number, 0x01, &data);
+	write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff));
+	write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8));
 
 	/* Disable access to divisor latch */
-	data = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
-	mos7720_port->shadowLCR = data;
-	send_mos_cmd(serial, MOS_WRITE, number, 0x03, &data);
+	mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
+	write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
 
 	return status;
 }
@@ -1117,7 +1603,6 @@ static void change_port_settings(struct tty_struct *tty,
 	__u8 lStop;
 	int status;
 	int port_number;
-	char data;
 
 	if (mos7720_port == NULL)
 		return ;
@@ -1196,30 +1681,19 @@ static void change_port_settings(struct tty_struct *tty,
 
 	/* Update the LCR with the correct value */
 	mos7720_port->shadowLCR &=
-			~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
+		~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
 	mos7720_port->shadowLCR |= (lData | lParity | lStop);
 
 
 	/* Disable Interrupts */
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port->number - port->serial->minor,
-							UART_IER, &data);
-
-	data = 0x00;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
-
-	data = 0xcf;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_FCR, &data);
+	write_mos_reg(serial, port_number, IER, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0x00);
+	write_mos_reg(serial, port_number, FCR, 0xcf);
 
 	/* Send the updated LCR value to the mos7720 */
-	data = mos7720_port->shadowLCR;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_LCR, &data);
-
-	data = 0x00b;
-	mos7720_port->shadowMCR = data;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
-	data = 0x00b;
-	send_mos_cmd(serial, MOS_WRITE, port_number, 0x04, &data);
+	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+	mos7720_port->shadowMCR = 0x0b;
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
 	/* set up the MCR register and send it to the mos7720 */
 	mos7720_port->shadowMCR = UART_MCR_OUT2;
@@ -1230,21 +1704,15 @@ static void change_port_settings(struct tty_struct *tty,
 		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
 		/* To set hardware flow control to the specified *
 		 * serial port, in SP1/2_CONTROL_REG             */
-		if (port->number) {
-			data = 0x001;
-			send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
-				     0x08, &data);
-		} else {
-			data = 0x002;
-			send_mos_cmd(serial, MOS_WRITE, MOS_MAX_PORT,
-				     0x08, &data);
-		}
-	} else {
+		if (port->number)
+			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
+		else
+			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
+
+	} else
 		mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
-	}
 
-	data = mos7720_port->shadowMCR;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_MCR, &data);
+	write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
 
 	/* Determine divisor based on baud rate */
 	baud = tty_get_baud_rate(tty);
@@ -1257,8 +1725,7 @@ static void change_port_settings(struct tty_struct *tty,
 	if (baud >= 230400) {
 		set_higher_rates(mos7720_port, baud);
 		/* Enable Interrupts */
-		data = 0x0c;
-		send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
+		write_mos_reg(serial, port_number, IER, 0x0c);
 		return;
 	}
 
@@ -1269,8 +1736,7 @@ static void change_port_settings(struct tty_struct *tty,
 	if (cflag & CBAUD)
 		tty_encode_baud_rate(tty, baud, baud);
 	/* Enable Interrupts */
-	data = 0x0c;
-	send_mos_cmd(serial, MOS_WRITE, port_number, UART_IER, &data);
+	write_mos_reg(serial, port_number, IER, 0x0c);
 
 	if (port->read_urb->status != -EINPROGRESS) {
 		port->read_urb->dev = serial->dev;
@@ -1308,7 +1774,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("setting termios - ASPIRE");
+	dbg("%s\n", "setting termios - ASPIRE");
 
 	cflag = tty->termios->c_cflag;
 
@@ -1326,7 +1792,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 	change_port_settings(tty, mos7720_port, old_termios);
 
 	if (!port->read_urb) {
-		dbg("URB KILLED !!!!!");
+		dbg("%s", "URB KILLED !!!!!");
 		return;
 	}
 
@@ -1361,8 +1827,7 @@ static int get_lsr_info(struct tty_struct *tty,
 
 	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
-		send_mos_cmd(port->serial, MOS_READ, port_number,
-							UART_LSR, &data);
+		read_mos_reg(port->serial, port_number, LSR, &data);
 		if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
 					== (UART_LSR_TEMT | UART_LSR_THRE)) {
 			dbg("%s -- Empty", __func__);
@@ -1400,13 +1865,11 @@ static int mos7720_tiocmget(struct tty_struct *tty, struct file *file)
 }
 
 static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
-					unsigned int set, unsigned int clear)
+			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
 	unsigned int mcr ;
-	unsigned char lmcr;
-
 	dbg("%s - port %d", __func__, port->number);
 	dbg("he was at tiocmget");
 
@@ -1427,10 +1890,8 @@ static int mos7720_tiocmset(struct tty_struct *tty, struct file *file,
 		mcr &= ~UART_MCR_LOOP;
 
 	mos7720_port->shadowMCR = mcr;
-	lmcr = mos7720_port->shadowMCR;
-
-	send_mos_cmd(port->serial, MOS_WRITE,
-		port->number - port->serial->minor, UART_MCR, &lmcr);
+	write_mos_reg(port->serial, port->number - port->serial->minor,
+		      MCR, mos7720_port->shadowMCR);
 
 	return 0;
 }
@@ -1440,7 +1901,6 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 {
 	unsigned int mcr ;
 	unsigned int arg;
-	unsigned char data;
 
 	struct usb_serial_port *port;
 
@@ -1475,10 +1935,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	}
 
 	mos7720_port->shadowMCR = mcr;
-
-	data = mos7720_port->shadowMCR;
-	send_mos_cmd(port->serial, MOS_WRITE,
-		     port->number - port->serial->minor, UART_MCR, &data);
+	write_mos_reg(port->serial, port->number - port->serial->minor,
+		      MCR, mos7720_port->shadowMCR);
 
 	return 0;
 }
@@ -1590,12 +2048,12 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 
 static int mos7720_startup(struct usb_serial *serial)
 {
-	struct moschip_serial *mos7720_serial;
 	struct moschip_port *mos7720_port;
 	struct usb_device *dev;
 	int i;
 	char data;
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	int ret_val;
 
 	dbg("%s: Entering ..........", __func__);
 
@@ -1606,15 +2064,6 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	dev = serial->dev;
 
-	/* create our private serial structure */
-	mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
-	if (mos7720_serial == NULL) {
-		dev_err(&dev->dev, "%s - Out of memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	usb_set_serial_data(serial, mos7720_serial);
-
 	/*
 	 * The 7715 uses the first bulk in/out endpoint pair for the parallel
 	 * port, and the second for the serial port.  Because the usbserial core
@@ -1638,16 +2087,12 @@ static int mos7720_startup(struct usb_serial *serial)
 		serial->port[1]->interrupt_in_buffer = NULL;
 	}
 
-	/* we set up the pointers to the endpoints in the mos7720_open *
-	 * function, as the structures aren't created yet.             */
 
-	/* set up port private structures */
+	/* set up serial port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 		if (mos7720_port == NULL) {
 			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
-			usb_set_serial_data(serial, NULL);
-			kfree(mos7720_serial);
 			return -ENOMEM;
 		}
 
@@ -1669,12 +2114,22 @@ static int mos7720_startup(struct usb_serial *serial)
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
 
-	/* LSR For Port 1 */
-	send_mos_cmd(serial, MOS_READ, 0x00, UART_LSR, &data);
-	dbg("LSR:%x", data);
+	/* start the interrupt urb */
+	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
+	if (ret_val)
+		dev_err(&dev->dev,
+			"%s - Error %d submitting control urb\n",
+			__func__, ret_val);
 
-	/* LSR For Port 2 */
-	send_mos_cmd(serial, MOS_READ, 0x01, UART_LSR, &data);
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	if (product == MOSCHIP_DEVICE_ID_7715) {
+		ret_val = mos7715_parport_init(serial);
+		if (ret_val < 0)
+			return ret_val;
+	}
+#endif
+	/* LSR For Port 1 */
+	read_mos_reg(serial, 0, LSR, &data);
 	dbg("LSR:%x", data);
 
 	return 0;
@@ -1684,12 +2139,47 @@ static void mos7720_release(struct usb_serial *serial)
 {
 	int i;
 
+#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
+	/* close the parallel port */
+
+	if (le16_to_cpu(serial->dev->descriptor.idProduct)
+	    == MOSCHIP_DEVICE_ID_7715) {
+		struct urbtracker *urbtrack;
+		unsigned long flags;
+		struct mos7715_parport *mos_parport =
+			usb_get_serial_data(serial);
+
+		/* prevent NULL ptr dereference in port callbacks */
+		spin_lock(&release_lock);
+		mos_parport->pp->private_data = NULL;
+		spin_unlock(&release_lock);
+
+		/* wait for synchronous usb calls to return */
+		if (mos_parport->msg_pending)
+			wait_for_completion_timeout(&mos_parport->syncmsg_compl,
+						    MOS_WDR_TIMEOUT);
+
+		parport_remove_port(mos_parport->pp);
+		usb_set_serial_data(serial, NULL);
+		mos_parport->serial = NULL;
+
+		/* if tasklet currently scheduled, wait for it to complete */
+		tasklet_kill(&mos_parport->urb_tasklet);
+
+		/* unlink any urbs sent by the tasklet  */
+		spin_lock_irqsave(&mos_parport->listlock, flags);
+		list_for_each_entry(urbtrack,
+				    &mos_parport->active_urbs,
+				    urblist_entry)
+			usb_unlink_urb(urbtrack->urb);
+		spin_unlock_irqrestore(&mos_parport->listlock, flags);
+
+		kref_put(&mos_parport->ref_count, destroy_mos_parport);
+	}
+#endif
 	/* free private structure allocated for serial port */
 	for (i = 0; i < serial->num_ports; ++i)
 		kfree(usb_get_serial_port_data(serial->port[i]));
-
-	/* free private structure allocated for serial device */
-	kfree(usb_get_serial_data(serial));
 }
 
 static struct usb_driver usb_driver = {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2fda1c0182b..f8424d1bfc1 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,7 +26,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 84d0edad8e4..e280ad8e12f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -42,35 +42,14 @@
 #include <linux/bitops.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include "usb-wwan.h"
 
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
-static void option_close(struct usb_serial_port *port);
-static void option_dtr_rts(struct usb_serial_port *port, int on);
-
-static int  option_startup(struct usb_serial *serial);
-static void option_disconnect(struct usb_serial *serial);
-static void option_release(struct usb_serial *serial);
-static int  option_write_room(struct tty_struct *tty);
-
+static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-static int  option_chars_in_buffer(struct tty_struct *tty);
-static void option_set_termios(struct tty_struct *tty,
-			struct usb_serial_port *port, struct ktermios *old);
-static int  option_tiocmget(struct tty_struct *tty, struct file *file);
-static int  option_tiocmset(struct tty_struct *tty, struct file *file,
-				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct usb_serial_port *port);
-#ifdef CONFIG_PM
-static int  option_suspend(struct usb_serial *serial, pm_message_t message);
-static int  option_resume(struct usb_serial *serial);
-#endif
-
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
 #define OPTION_PRODUCT_COLT			0x5000
@@ -380,6 +359,10 @@ static int  option_resume(struct usb_serial *serial);
 
 #define CINTERION_VENDOR_ID			0x0681
 
+/* Olivetti products */
+#define OLIVETTI_VENDOR_ID			0x0b3c
+#define OLIVETTI_PRODUCT_OLICARD100		0xc000
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -675,6 +658,180 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1060, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1061, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1062, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1064, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1065, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1066, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1067, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1068, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1069, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1070, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1071, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1072, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1074, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1075, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1076, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1077, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1078, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1079, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1080, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1081, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1082, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1083, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1084, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1085, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1086, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1087, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1088, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1089, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1090, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1091, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1092, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1093, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1094, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1095, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1096, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1097, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1098, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1099, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1100, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1101, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1102, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1103, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1104, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1105, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1106, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1107, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1108, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1109, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1110, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1111, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1112, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1113, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1114, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1115, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1116, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1117, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1118, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1119, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1120, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1121, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1122, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1123, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1124, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1125, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1126, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1127, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1128, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1129, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1130, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1131, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1132, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1133, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1134, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1135, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1136, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1137, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1138, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1139, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1140, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1141, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1142, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1143, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1144, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1145, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1146, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1147, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1148, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1149, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1150, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1151, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1152, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1153, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1154, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1155, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1156, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1157, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1158, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1159, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1160, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1161, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1162, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1163, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1164, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1165, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1166, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1167, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1168, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1260, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1261, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1262, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1263, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1264, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1265, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1266, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1274, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1275, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1276, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1277, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1278, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1279, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1280, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1281, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1282, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1283, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1284, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1285, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1286, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1287, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1288, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1289, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1290, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1291, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1292, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1293, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1294, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1295, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1296, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1297, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
@@ -726,6 +883,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
 
 	{ USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
+
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -757,22 +916,22 @@ static struct usb_serial_driver option_1port_device = {
 	.id_table          = option_ids,
 	.num_ports         = 1,
 	.probe             = option_probe,
-	.open              = option_open,
-	.close             = option_close,
-	.dtr_rts	   = option_dtr_rts,
-	.write             = option_write,
-	.write_room        = option_write_room,
-	.chars_in_buffer   = option_chars_in_buffer,
-	.set_termios       = option_set_termios,
-	.tiocmget          = option_tiocmget,
-	.tiocmset          = option_tiocmset,
-	.attach            = option_startup,
-	.disconnect        = option_disconnect,
-	.release           = option_release,
+	.open              = usb_wwan_open,
+	.close             = usb_wwan_close,
+	.dtr_rts	   = usb_wwan_dtr_rts,
+	.write             = usb_wwan_write,
+	.write_room        = usb_wwan_write_room,
+	.chars_in_buffer   = usb_wwan_chars_in_buffer,
+	.set_termios       = usb_wwan_set_termios,
+	.tiocmget          = usb_wwan_tiocmget,
+	.tiocmset          = usb_wwan_tiocmset,
+	.attach            = usb_wwan_startup,
+	.disconnect        = usb_wwan_disconnect,
+	.release           = usb_wwan_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
-	.suspend           = option_suspend,
-	.resume            = option_resume,
+	.suspend           = usb_wwan_suspend,
+	.resume            = usb_wwan_resume,
 #endif
 };
 
@@ -785,13 +944,6 @@ static int debug;
 #define IN_BUFLEN 4096
 #define OUT_BUFLEN 4096
 
-struct option_intf_private {
-	spinlock_t susp_lock;
-	unsigned int suspended:1;
-	int in_flight;
-	struct option_blacklist_info *blacklist_info;
-};
-
 struct option_port_private {
 	/* Input endpoints and buffer for this port */
 	struct urb *in_urbs[N_IN_URB];
@@ -848,8 +1000,7 @@ module_exit(option_exit);
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
-	struct option_intf_private *data;
-
+	struct usb_wwan_intf_private *data;
 	/* D-Link DWM 652 still exposes CD-Rom emulation interface in modem mode */
 	if (serial->dev->descriptor.idVendor == DLINK_VENDOR_ID &&
 		serial->dev->descriptor.idProduct == DLINK_PRODUCT_DWM_652 &&
@@ -862,11 +1013,13 @@ static int option_probe(struct usb_serial *serial,
 		serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff)
 		return -ENODEV;
 
-	data = serial->private = kzalloc(sizeof(struct option_intf_private), GFP_KERNEL);
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
+
 	if (!data)
 		return -ENOMEM;
+	data->send_setup = option_send_setup;
 	spin_lock_init(&data->susp_lock);
-	data->blacklist_info = (struct option_blacklist_info*) id->driver_info;
+	data->private = (void *)id->driver_info;
 	return 0;
 }
 
@@ -887,194 +1040,6 @@ static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
 	return OPTION_BLACKLIST_NONE;
 }
 
-static void option_set_termios(struct tty_struct *tty,
-		struct usb_serial_port *port, struct ktermios *old_termios)
-{
-	dbg("%s", __func__);
-	/* Doesn't support option setting */
-	tty_termios_copy_hw(tty->termios, old_termios);
-	option_send_setup(port);
-}
-
-static int option_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned int value;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
-		((portdata->dtr_state) ? TIOCM_DTR : 0) |
-		((portdata->cts_state) ? TIOCM_CTS : 0) |
-		((portdata->dsr_state) ? TIOCM_DSR : 0) |
-		((portdata->dcd_state) ? TIOCM_CAR : 0) |
-		((portdata->ri_state) ? TIOCM_RNG : 0);
-
-	return value;
-}
-
-static int option_tiocmset(struct tty_struct *tty, struct file *file,
-			unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-
-	portdata = usb_get_serial_port_data(port);
-
-	/* FIXME: what locks portdata fields ? */
-	if (set & TIOCM_RTS)
-		portdata->rts_state = 1;
-	if (set & TIOCM_DTR)
-		portdata->dtr_state = 1;
-
-	if (clear & TIOCM_RTS)
-		portdata->rts_state = 0;
-	if (clear & TIOCM_DTR)
-		portdata->dtr_state = 0;
-	return option_send_setup(port);
-}
-
-/* Write */
-static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-	int left, todo;
-	struct urb *this_urb = NULL; /* spurious */
-	int err;
-	unsigned long flags;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = port->serial->private;
-
-	dbg("%s: write (%d chars)", __func__, count);
-
-	i = 0;
-	left = count;
-	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
-		todo = left;
-		if (todo > OUT_BUFLEN)
-			todo = OUT_BUFLEN;
-
-		this_urb = portdata->out_urbs[i];
-		if (test_and_set_bit(i, &portdata->out_busy)) {
-			if (time_before(jiffies,
-					portdata->tx_start_time[i] + 10 * HZ))
-				continue;
-			usb_unlink_urb(this_urb);
-			continue;
-		}
-		dbg("%s: endpoint %d buf %d", __func__,
-			usb_pipeendpoint(this_urb->pipe), i);
-
-		err = usb_autopm_get_interface_async(port->serial->interface);
-		if (err < 0)
-			break;
-
-		/* send the data */
-		memcpy(this_urb->transfer_buffer, buf, todo);
-		this_urb->transfer_buffer_length = todo;
-
-		spin_lock_irqsave(&intfdata->susp_lock, flags);
-		if (intfdata->suspended) {
-			usb_anchor_urb(this_urb, &portdata->delayed);
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-		} else {
-			intfdata->in_flight++;
-			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-			err = usb_submit_urb(this_urb, GFP_ATOMIC);
-			if (err) {
-				dbg("usb_submit_urb %p (write bulk) failed "
-					"(%d)", this_urb, err);
-				clear_bit(i, &portdata->out_busy);
-				spin_lock_irqsave(&intfdata->susp_lock, flags);
-				intfdata->in_flight--;
-				spin_unlock_irqrestore(&intfdata->susp_lock, flags);
-				continue;
-			}
-		}
-
-		portdata->tx_start_time[i] = jiffies;
-		buf += todo;
-		left -= todo;
-	}
-
-	count -= left;
-	dbg("%s: wrote (did %d)", __func__, count);
-	return count;
-}
-
-static void option_indat_callback(struct urb *urb)
-{
-	int err;
-	int endpoint;
-	struct usb_serial_port *port;
-	struct tty_struct *tty;
-	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
-
-	dbg("%s: %p", __func__, urb);
-
-	endpoint = usb_pipeendpoint(urb->pipe);
-	port =  urb->context;
-
-	if (status) {
-		dbg("%s: nonzero status: %d on endpoint %02x.",
-		    __func__, status, endpoint);
-	} else {
-		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else 
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
-
-		/* Resubmit urb so we continue receiving */
-		if (status != -ESHUTDOWN) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err && err != -EPERM)
-				printk(KERN_ERR "%s: resubmit read urb failed. "
-					"(%d)", __func__, err);
-			else
-				usb_mark_last_busy(port->serial->dev);
-		}
-
-	}
-	return;
-}
-
-static void option_outdat_callback(struct urb *urb)
-{
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	int i;
-
-	dbg("%s", __func__);
-
-	port =  urb->context;
-	intfdata = port->serial->private;
-
-	usb_serial_port_softint(port);
-	usb_autopm_put_interface_async(port->serial->interface);
-	portdata = usb_get_serial_port_data(port);
-	spin_lock(&intfdata->susp_lock);
-	intfdata->in_flight--;
-	spin_unlock(&intfdata->susp_lock);
-
-	for (i = 0; i < N_OUT_URB; ++i) {
-		if (portdata->out_urbs[i] == urb) {
-			smp_mb__before_clear_bit();
-			clear_bit(i, &portdata->out_busy);
-			break;
-		}
-	}
-}
-
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
@@ -1131,183 +1096,6 @@ static void option_instat_callback(struct urb *urb)
 	}
 }
 
-static int option_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		if (this_urb && !test_bit(i, &portdata->out_busy))
-			data_len += OUT_BUFLEN;
-	}
-
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct option_port_private *portdata;
-	int i;
-	int data_len = 0;
-	struct urb *this_urb;
-
-	portdata = usb_get_serial_port_data(port);
-
-	for (i = 0; i < N_OUT_URB; i++) {
-		this_urb = portdata->out_urbs[i];
-		/* FIXME: This locking is insufficient as this_urb may
-		   go unused during the test */
-		if (this_urb && test_bit(i, &portdata->out_busy))
-			data_len += this_urb->transfer_buffer_length;
-	}
-	dbg("%s: %d", __func__, data_len);
-	return data_len;
-}
-
-static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata;
-	struct usb_serial *serial = port->serial;
-	int i, err;
-	struct urb *urb;
-
-	portdata = usb_get_serial_port_data(port);
-	intfdata = serial->private;
-
-	dbg("%s", __func__);
-
-	/* Start reading from the IN endpoint */
-	for (i = 0; i < N_IN_URB; i++) {
-		urb = portdata->in_urbs[i];
-		if (!urb)
-			continue;
-		err = usb_submit_urb(urb, GFP_KERNEL);
-		if (err) {
-			dbg("%s: submit urb %d failed (%d) %d",
-				__func__, i, err,
-				urb->transfer_buffer_length);
-		}
-	}
-
-	option_send_setup(port);
-
-	serial->interface->needs_remote_wakeup = 1;
-	spin_lock_irq(&intfdata->susp_lock);
-	portdata->opened = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	usb_autopm_put_interface(serial->interface);
-
-	return 0;
-}
-
-static void option_dtr_rts(struct usb_serial_port *port, int on)
-{
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-	mutex_lock(&serial->disc_mutex);
-	portdata->rts_state = on;
-	portdata->dtr_state = on;
-	if (serial->dev)
-		option_send_setup(port);
-	mutex_unlock(&serial->disc_mutex);
-}
-
-
-static void option_close(struct usb_serial_port *port)
-{
-	int i;
-	struct usb_serial *serial = port->serial;
-	struct option_port_private *portdata;
-	struct option_intf_private *intfdata = port->serial->private;
-
-	dbg("%s", __func__);
-	portdata = usb_get_serial_port_data(port);
-
-	if (serial->dev) {
-		/* Stop reading/writing urbs */
-		spin_lock_irq(&intfdata->susp_lock);
-		portdata->opened = 0;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		for (i = 0; i < N_IN_URB; i++)
-			usb_kill_urb(portdata->in_urbs[i]);
-		for (i = 0; i < N_OUT_URB; i++)
-			usb_kill_urb(portdata->out_urbs[i]);
-		usb_autopm_get_interface(serial->interface);
-		serial->interface->needs_remote_wakeup = 0;
-	}
-}
-
-/* Helper functions used by option_setup_urbs */
-static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
-		int dir, void *ctx, char *buf, int len,
-		void (*callback)(struct urb *))
-{
-	struct urb *urb;
-
-	if (endpoint == -1)
-		return NULL;		/* endpoint not needed */
-
-	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
-	if (urb == NULL) {
-		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
-		return NULL;
-	}
-
-		/* Fill URB using supplied data. */
-	usb_fill_bulk_urb(urb, serial->dev,
-		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
-		      buf, len, callback, ctx);
-
-	return urb;
-}
-
-/* Setup urbs */
-static void option_setup_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* Do indat endpoints first */
-		for (j = 0; j < N_IN_URB; ++j) {
-			portdata->in_urbs[j] = option_setup_urb(serial,
-					port->bulk_in_endpointAddress,
-					USB_DIR_IN, port,
-					portdata->in_buffer[j],
-					IN_BUFLEN, option_indat_callback);
-		}
-
-		/* outdat endpoints */
-		for (j = 0; j < N_OUT_URB; ++j) {
-			portdata->out_urbs[j] = option_setup_urb(serial,
-					port->bulk_out_endpointAddress,
-					USB_DIR_OUT, port,
-					portdata->out_buffer[j],
-					OUT_BUFLEN, option_outdat_callback);
-		}
-	}
-}
-
-
 /** send RTS/DTR state to the port.
  *
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
@@ -1316,15 +1104,16 @@ static void option_setup_urbs(struct usb_serial *serial)
 static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	struct option_intf_private *intfdata =
-		(struct option_intf_private *) serial->private;
+	struct usb_wwan_intf_private *intfdata =
+		(struct usb_wwan_intf_private *) serial->private;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);
 
-	if (is_blacklisted(ifNum, intfdata->blacklist_info) ==
-						OPTION_BLACKLIST_SENDSETUP) {
+	if (is_blacklisted(ifNum,
+			   (struct option_blacklist_info *) intfdata->private)
+	    == OPTION_BLACKLIST_SENDSETUP) {
 		dbg("No send_setup on blacklisted interface #%d\n", ifNum);
 		return -EIO;
 	}
@@ -1341,224 +1130,6 @@ static int option_send_setup(struct usb_serial_port *port)
 		0x22, 0x21, val, ifNum, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
-static int option_startup(struct usb_serial *serial)
-{
-	int i, j, err;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-	u8 *buffer;
-
-	dbg("%s", __func__);
-
-	/* Now setup per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
-		if (!portdata) {
-			dbg("%s: kmalloc for option_port_private (%d) failed!.",
-					__func__, i);
-			return 1;
-		}
-		init_usb_anchor(&portdata->delayed);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			buffer = (u8 *)__get_free_page(GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error;
-			portdata->in_buffer[j] = buffer;
-		}
-
-		for (j = 0; j < N_OUT_URB; j++) {
-			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
-			if (!buffer)
-				goto bail_out_error2;
-			portdata->out_buffer[j] = buffer;
-		}
-
-		usb_set_serial_port_data(port, portdata);
-
-		if (!port->interrupt_in_urb)
-			continue;
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
-		if (err)
-			dbg("%s: submit irq_in urb failed %d",
-				__func__, err);
-	}
-	option_setup_urbs(serial);
-	return 0;
-
-bail_out_error2:
-	for (j = 0; j < N_OUT_URB; j++)
-		kfree(portdata->out_buffer[j]);
-bail_out_error:
-	for (j = 0; j < N_IN_URB; j++)
-		if (portdata->in_buffer[j])
-			free_page((unsigned long)portdata->in_buffer[j]);
-	kfree(portdata);
-	return 1;
-}
-
-static void stop_read_write_urbs(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	/* Stop reading/writing urbs */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-		for (j = 0; j < N_IN_URB; j++)
-			usb_kill_urb(portdata->in_urbs[j]);
-		for (j = 0; j < N_OUT_URB; j++)
-			usb_kill_urb(portdata->out_urbs[j]);
-	}
-}
-
-static void option_disconnect(struct usb_serial *serial)
-{
-	dbg("%s", __func__);
-
-	stop_read_write_urbs(serial);
-}
-
-static void option_release(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_port_private *portdata;
-
-	dbg("%s", __func__);
-
-	/* Now free them */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		for (j = 0; j < N_IN_URB; j++) {
-			if (portdata->in_urbs[j]) {
-				usb_free_urb(portdata->in_urbs[j]);
-				free_page((unsigned long)
-					portdata->in_buffer[j]);
-				portdata->in_urbs[j] = NULL;
-			}
-		}
-		for (j = 0; j < N_OUT_URB; j++) {
-			if (portdata->out_urbs[j]) {
-				usb_free_urb(portdata->out_urbs[j]);
-				kfree(portdata->out_buffer[j]);
-				portdata->out_urbs[j] = NULL;
-			}
-		}
-	}
-
-	/* Now free per port private data */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		kfree(usb_get_serial_port_data(port));
-	}
-}
-
-#ifdef CONFIG_PM
-static int option_suspend(struct usb_serial *serial, pm_message_t message)
-{
-	struct option_intf_private *intfdata = serial->private;
-	int b;
-
-	dbg("%s entered", __func__);
-
-	if (message.event & PM_EVENT_AUTO) {
-		spin_lock_irq(&intfdata->susp_lock);
-		b = intfdata->in_flight;
-		spin_unlock_irq(&intfdata->susp_lock);
-
-		if (b)
-			return -EBUSY;
-	}
-
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 1;
-	spin_unlock_irq(&intfdata->susp_lock);
-	stop_read_write_urbs(serial);
-
-	return 0;
-}
-
-static void play_delayed(struct usb_serial_port *port)
-{
-	struct option_intf_private *data;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err;
-
-	portdata = usb_get_serial_port_data(port);
-	data = port->serial->private;
-	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (!err)
-			data->in_flight++;
-	}
-}
-
-static int option_resume(struct usb_serial *serial)
-{
-	int i, j;
-	struct usb_serial_port *port;
-	struct option_intf_private *intfdata = serial->private;
-	struct option_port_private *portdata;
-	struct urb *urb;
-	int err = 0;
-
-	dbg("%s entered", __func__);
-	/* get the interrupt URBs resubmitted unconditionally */
-	for (i = 0; i < serial->num_ports; i++) {
-		port = serial->port[i];
-		if (!port->interrupt_in_urb) {
-			dbg("%s: No interrupt URB for port %d", __func__, i);
-			continue;
-		}
-		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
-		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
-		if (err < 0) {
-			err("%s: Error %d for interrupt URB of port%d",
-				 __func__, err, i);
-			goto err_out;
-		}
-	}
-
-	for (i = 0; i < serial->num_ports; i++) {
-		/* walk all ports */
-		port = serial->port[i];
-		portdata = usb_get_serial_port_data(port);
-
-		/* skip closed ports */
-		spin_lock_irq(&intfdata->susp_lock);
-		if (!portdata->opened) {
-			spin_unlock_irq(&intfdata->susp_lock);
-			continue;
-		}
-
-		for (j = 0; j < N_IN_URB; j++) {
-			urb = portdata->in_urbs[j];
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err < 0) {
-				err("%s: Error %d for bulk URB %d",
-					 __func__, err, i);
-				spin_unlock_irq(&intfdata->susp_lock);
-				goto err_out;
-			}
-		}
-		play_delayed(port);
-		spin_unlock_irq(&intfdata->susp_lock);
-	}
-	spin_lock_irq(&intfdata->susp_lock);
-	intfdata->suspended = 0;
-	spin_unlock_irq(&intfdata->susp_lock);
-err_out:
-	return err;
-}
-#endif
-
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index deeacdea05d..e199b0f4f99 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -51,12 +51,13 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
+#include <linux/kfifo.h>
 #include "oti6858.h"
 
 #define OTI6858_DESCRIPTION \
 	"Ours Technology Inc. OTi-6858 USB to serial adapter driver"
 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
-#define OTI6858_VERSION "0.1"
+#define OTI6858_VERSION "0.2"
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
@@ -75,18 +76,6 @@ static struct usb_driver oti6858_driver = {
 
 static int debug;
 
-
-/* buffering code, copied from pl2303 driver */
-#define PL2303_BUF_SIZE		1024
-#define PL2303_TMP_BUF_SIZE	1024
-
-struct oti6858_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 /* requests */
 #define	OTI6858_REQ_GET_STATUS		(USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
 #define	OTI6858_REQ_T_GET_STATUS	0x01
@@ -161,18 +150,6 @@ static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 static int oti6858_startup(struct usb_serial *serial);
 static void oti6858_release(struct usb_serial *serial);
 
-/* functions operating on buffers */
-static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
-static void oti6858_buf_free(struct oti6858_buf *pb);
-static void oti6858_buf_clear(struct oti6858_buf *pb);
-static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb);
-static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb);
-static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
-					unsigned int count);
-static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
-					unsigned int count);
-
-
 /* device info */
 static struct usb_serial_driver oti6858_device = {
 	.driver = {
@@ -201,7 +178,6 @@ static struct usb_serial_driver oti6858_device = {
 struct oti6858_private {
 	spinlock_t lock;
 
-	struct oti6858_buf *buf;
 	struct oti6858_control_pkt status;
 
 	struct {
@@ -295,7 +271,7 @@ static void setup_line(struct work_struct *work)
 	}
 }
 
-void send_data(struct work_struct *work)
+static void send_data(struct work_struct *work)
 {
 	struct oti6858_private *priv = container_of(work,
 			struct oti6858_private, delayed_write_work.work);
@@ -314,9 +290,12 @@ void send_data(struct work_struct *work)
 		return;
 	}
 	priv->flags.write_urb_in_use = 1;
-
-	count = oti6858_buf_data_avail(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
+
+	spin_lock_irqsave(&port->lock, flags);
+	count = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
+
 	if (count > port->bulk_out_size)
 		count = port->bulk_out_size;
 
@@ -350,10 +329,9 @@ void send_data(struct work_struct *work)
 		return;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	oti6858_buf_get(priv->buf, port->write_urb->transfer_buffer, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
+	count = kfifo_out_locked(&port->write_fifo,
+					port->write_urb->transfer_buffer,
+					count, &port->lock);
 	port->write_urb->transfer_buffer_length = count;
 	port->write_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->write_urb, GFP_NOIO);
@@ -376,11 +354,6 @@ static int oti6858_startup(struct usb_serial *serial)
 		priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
 		if (!priv)
 			break;
-		priv->buf = oti6858_buf_alloc(PL2303_BUF_SIZE);
-		if (priv->buf == NULL) {
-			kfree(priv);
-			break;
-		}
 
 		spin_lock_init(&priv->lock);
 		init_waitqueue_head(&priv->intr_wait);
@@ -397,7 +370,6 @@ static int oti6858_startup(struct usb_serial *serial)
 
 	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		oti6858_buf_free(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -407,17 +379,12 @@ static int oti6858_startup(struct usb_serial *serial)
 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
-	struct oti6858_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
 	dbg("%s(port = %d, count = %d)", __func__, port->number, count);
 
 	if (!count)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	count = oti6858_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
 
 	return count;
 }
@@ -425,15 +392,14 @@ static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 static int oti6858_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	room = oti6858_buf_space_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	room = kfifo_avail(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return room;
 }
@@ -441,15 +407,14 @@ static int oti6858_write_room(struct tty_struct *tty)
 static int oti6858_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = oti6858_buf_data_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	chars = kfifo_len(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return chars;
 }
@@ -640,10 +605,10 @@ static void oti6858_close(struct usb_serial_port *port)
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
 	/* clear out any remaining data in the buffer */
-	oti6858_buf_clear(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	dbg("%s(): after buf_clear()", __func__);
 
@@ -785,18 +750,12 @@ static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 
 static void oti6858_release(struct usb_serial *serial)
 {
-	struct oti6858_private *priv;
 	int i;
 
 	dbg("%s()", __func__);
 
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			oti6858_buf_free(priv->buf);
-			kfree(priv);
-		}
-	}
+	for (i = 0; i < serial->num_ports; ++i)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
 static void oti6858_read_int_callback(struct urb *urb)
@@ -889,10 +848,14 @@ static void oti6858_read_int_callback(struct urb *urb)
 		}
 	} else if (!transient) {
 		unsigned long flags;
+		int count;
+
+		spin_lock_irqsave(&port->lock, flags);
+		count = kfifo_len(&port->write_fifo);
+		spin_unlock_irqrestore(&port->lock, flags);
 
 		spin_lock_irqsave(&priv->lock, flags);
-		if (priv->flags.write_urb_in_use == 0
-				&& oti6858_buf_data_avail(priv->buf) != 0) {
+		if (priv->flags.write_urb_in_use == 0 && count != 0) {
 			schedule_delayed_work(&priv->delayed_write_work, 0);
 			resubmit = 0;
 		}
@@ -1014,165 +977,6 @@ static void oti6858_write_bulk_callback(struct urb *urb)
 	}
 }
 
-
-/*
- * oti6858_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct oti6858_buf *oti6858_buf_alloc(unsigned int size)
-{
-	struct oti6858_buf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(struct oti6858_buf), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/*
- * oti6858_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void oti6858_buf_free(struct oti6858_buf *pb)
-{
-	if (pb) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/*
- * oti6858_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void oti6858_buf_clear(struct oti6858_buf *pb)
-{
-	if (pb != NULL) {
-		/* equivalent to a get of all data available */
-		pb->buf_get = pb->buf_put;
-	}
-}
-
-/*
- * oti6858_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/*
- * oti6858_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/*
- * oti6858_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
-					unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = oti6858_buf_space_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-
-	return count;
-}
-
-/*
- * oti6858_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
-					unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len = oti6858_buf_data_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
-}
-
 /* module description and (de)initialization */
 
 static int __init oti6858_init(void)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index c28b1607eac..6b600182227 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -40,16 +40,6 @@ static int debug;
 
 #define PL2303_CLOSING_WAIT	(30*HZ)
 
-#define PL2303_BUF_SIZE		1024
-#define PL2303_TMP_BUF_SIZE	1024
-
-struct pl2303_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
@@ -157,173 +147,12 @@ enum pl2303_type {
 
 struct pl2303_private {
 	spinlock_t lock;
-	struct pl2303_buf *buf;
-	int write_urb_in_use;
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
 	enum pl2303_type type;
 };
 
-/*
- * pl2303_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
-{
-	struct pl2303_buf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/*
- * pl2303_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void pl2303_buf_free(struct pl2303_buf *pb)
-{
-	if (pb) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/*
- * pl2303_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void pl2303_buf_clear(struct pl2303_buf *pb)
-{
-	if (pb != NULL)
-		pb->buf_get = pb->buf_put;
-		/* equivalent to a get of all data available */
-}
-
-/*
- * pl2303_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-
-	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/*
- * pl2303_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-
-	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/*
- * pl2303_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
-				   unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = pl2303_buf_space_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-
-	return count;
-}
-
-/*
- * pl2303_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
-				   unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len = pl2303_buf_data_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
-}
-
 static int pl2303_vendor_read(__u16 value, __u16 index,
 		struct usb_serial *serial, unsigned char *buf)
 {
@@ -372,11 +201,6 @@ static int pl2303_startup(struct usb_serial *serial)
 		if (!priv)
 			goto cleanup;
 		spin_lock_init(&priv->lock);
-		priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
-		if (priv->buf == NULL) {
-			kfree(priv);
-			goto cleanup;
-		}
 		init_waitqueue_head(&priv->delta_msr_wait);
 		priv->type = type;
 		usb_set_serial_port_data(serial->port[i], priv);
@@ -404,7 +228,6 @@ cleanup:
 	kfree(buf);
 	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		pl2303_buf_free(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -422,102 +245,6 @@ static int set_control_lines(struct usb_device *dev, u8 value)
 	return retval;
 }
 
-static void pl2303_send(struct usb_serial_port *port)
-{
-	int count, result;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->write_urb_in_use) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
-
-	count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
-			       port->bulk_out_size);
-
-	if (count == 0) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
-
-	priv->write_urb_in_use = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count,
-			      port->write_urb->transfer_buffer);
-
-	port->write_urb->transfer_buffer_length = count;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&port->dev, "%s - failed submitting write urb,"
-			" error %d\n", __func__, result);
-		priv->write_urb_in_use = 0;
-		/* TODO: reschedule pl2303_send */
-	}
-
-	usb_serial_port_softint(port);
-}
-
-static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port,
-				const unsigned char *buf, int count)
-{
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d, %d bytes", __func__, port->number, count);
-
-	if (!count)
-		return count;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	count = pl2303_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	pl2303_send(port);
-
-	return count;
-}
-
-static int pl2303_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int room = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	room = pl2303_buf_space_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-}
-
-static int pl2303_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int chars = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = pl2303_buf_data_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-}
-
 static void pl2303_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -729,22 +456,10 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 
 static void pl2303_close(struct usb_serial_port *port)
 {
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	/* clear out any remaining data in the buffer */
-	pl2303_buf_clear(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __func__);
-	usb_kill_urb(port->write_urb);
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
-
 }
 
 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -770,10 +485,8 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
 	dbg("%s - submitting read urb", __func__);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting read urb,"
-			" error %d\n", __func__, result);
 		pl2303_close(port);
 		return -EPROTO;
 	}
@@ -953,10 +666,7 @@ static void pl2303_release(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			pl2303_buf_free(priv->buf);
-			kfree(priv);
-		}
+		kfree(priv);
 	}
 }
 
@@ -1037,13 +747,31 @@ exit:
 			__func__, retval);
 }
 
-static void pl2303_push_data(struct tty_struct *tty,
-		struct usb_serial_port *port, struct urb *urb,
-		u8 line_status)
+static void pl2303_process_read_urb(struct urb *urb)
 {
+	struct usb_serial_port *port = urb->context;
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
-	/* get tty_flag from status */
 	char tty_flag = TTY_NORMAL;
+	unsigned long flags;
+	u8 line_status;
+	int i;
+
+	/* update line status */
+	spin_lock_irqsave(&priv->lock, flags);
+	line_status = priv->line_status;
+	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	wake_up_interruptible(&priv->delta_msr_wait);
+
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
 	/* break takes precedence over parity, */
 	/* which takes precedence over framing errors */
 	if (line_status & UART_BREAK_ERROR)
@@ -1058,107 +786,17 @@ static void pl2303_push_data(struct tty_struct *tty,
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 
-	if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq))
-		tty_insert_flip_string(tty, data, urb->actual_length);
-	else {
-		int i;
+	if (port->port.console && port->sysrq) {
 		for (i = 0; i < urb->actual_length; ++i)
 			if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
 				tty_insert_flip_char(tty, data[i], tty_flag);
+	} else {
+		tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
 	}
-	tty_flip_buffer_push(tty);
-}
-
-static void pl2303_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port =  urb->context;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
-	unsigned long flags;
-	int result;
-	int status = urb->status;
-	u8 line_status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - urb status = %d", __func__, status);
-		if (status == -EPROTO) {
-			/* PL2303 mysteriously fails with -EPROTO reschedule
-			 * the read */
-			dbg("%s - caught -EPROTO, resubmitting the urb",
-			    __func__);
-			result = usb_submit_urb(urb, GFP_ATOMIC);
-			if (result)
-				dev_err(&urb->dev->dev, "%s - failed"
-					" resubmitting read urb, error %d\n",
-					__func__, result);
-			return;
-		}
-		dbg("%s - unable to handle the error, exiting.", __func__);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-			      urb->actual_length, urb->transfer_buffer);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	line_status = priv->line_status;
-	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&priv->delta_msr_wait);
 
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		pl2303_push_data(tty, port, urb, line_status);
-	}
+	tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
-	/* Schedule the next read _if_ we are still open */
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result && result != -EPERM)
-		dev_err(&urb->dev->dev, "%s - failed resubmitting"
-			" read urb, error %d\n", __func__, result);
-}
-
-static void pl2303_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port =  urb->context;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int result;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
-		priv->write_urb_in_use = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __func__);
-		dbg("%s - nonzero write bulk status received: %d", __func__,
-		    status);
-		port->write_urb->transfer_buffer_length = 1;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting write"
-				" urb, error %d\n", __func__, result);
-		else
-			return;
-	}
-
-	priv->write_urb_in_use = 0;
-
-	/* send any buffered data */
-	pl2303_send(port);
 }
 
 /* All of the device info needed for the PL2303 SIO serial converter */
@@ -1170,21 +808,19 @@ static struct usb_serial_driver pl2303_device = {
 	.id_table =		id_table,
 	.usb_driver = 		&pl2303_driver,
 	.num_ports =		1,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
 	.dtr_rts = 		pl2303_dtr_rts,
 	.carrier_raised =	pl2303_carrier_raised,
-	.write =		pl2303_write,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,
 	.set_termios =		pl2303_set_termios,
 	.tiocmget =		pl2303_tiocmget,
 	.tiocmset =		pl2303_tiocmset,
-	.read_bulk_callback =	pl2303_read_bulk_callback,
+	.process_read_urb =	pl2303_process_read_urb,
 	.read_int_callback =	pl2303_read_int_callback,
-	.write_bulk_callback =	pl2303_write_bulk_callback,
-	.write_room =		pl2303_write_room,
-	.chars_in_buffer =	pl2303_chars_in_buffer,
 	.attach =		pl2303_startup,
 	.release =		pl2303_release,
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 23c09b38b9e..a871645389d 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -5,7 +5,7 @@
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
- * 
+ *
  */
 
 #define BENQ_VENDOR_ID			0x04a5
@@ -137,5 +137,5 @@
 #define SANWA_PRODUCT_ID	0x0001
 
 /* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
-#define ADLINK_VENDOR_ID        0x0b63
-#define ADLINK_ND6530_PRODUCT_ID       0x6530
+#define ADLINK_VENDOR_ID		0x0b63
+#define ADLINK_ND6530_PRODUCT_ID	0x6530
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 7e3bea23600..214a3e50429 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -50,6 +50,10 @@
 #define SANYO_VENDOR_ID				0x0474
 #define SANYO_PRODUCT_KATANA_LX			0x0754 /* SCP-3800 (Katana LX) */
 
+/* Samsung devices */
+#define SAMSUNG_VENDOR_ID			0x04e8
+#define SAMSUNG_PRODUCT_U520			0x6640 /* SCH-U520 */
+
 static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
@@ -61,6 +65,7 @@ static struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 53a2d5a935a..04bb759536b 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -15,6 +15,8 @@
 #include <linux/tty_flip.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/slab.h>
+#include "usb-wwan.h"
 
 #define DRIVER_AUTHOR "Qualcomm Inc"
 #define DRIVER_DESC "Qualcomm USB Serial driver"
@@ -76,6 +78,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
 	{USB_DEVICE(0x16d8, 0x8001)},	/* CMDTech Gobi 2000 QDL device (VU922) */
 	{USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
+	{USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */
+	{USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
@@ -92,6 +96,8 @@ static struct usb_driver qcdriver = {
 
 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 {
+	struct usb_wwan_intf_private *data;
+	struct usb_host_interface *intf = serial->interface->cur_altsetting;
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
@@ -100,33 +106,45 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dbg("Num Interfaces = %d", nintf);
-	ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
+	ifnum = intf->desc.bInterfaceNumber;
 	dbg("This Interface = %d", ifnum);
 
+	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+					 GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spin_lock_init(&data->susp_lock);
+
 	switch (nintf) {
 	case 1:
 		/* QDL mode */
-		if (serial->interface->num_altsetting == 2) {
-			struct usb_host_interface *intf;
-
+		/* Gobi 2000 has a single altsetting, older ones have two */
+		if (serial->interface->num_altsetting == 2)
 			intf = &serial->interface->altsetting[1];
-			if (intf->desc.bNumEndpoints == 2) {
-				if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
-				    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
-					dbg("QDL port found");
-					retval = usb_set_interface(serial->dev, ifnum, 1);
-					if (retval < 0) {
-						dev_err(&serial->dev->dev,
-							"Could not set interface, error %d\n",
-							retval);
-						retval = -ENODEV;
-					}
-					return retval;
-				}
+		else if (serial->interface->num_altsetting > 2)
+			break;
+
+		if (intf->desc.bNumEndpoints == 2 &&
+		    usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
+		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
+			dbg("QDL port found");
+
+			if (serial->interface->num_altsetting == 1)
+				return 0;
+
+			retval = usb_set_interface(serial->dev, ifnum, 1);
+			if (retval < 0) {
+				dev_err(&serial->dev->dev,
+					"Could not set interface, error %d\n",
+					retval);
+				retval = -ENODEV;
 			}
+			return retval;
 		}
 		break;
 
+	case 3:
 	case 4:
 		/* Composite mode */
 		if (ifnum == 2) {
@@ -161,6 +179,18 @@ static struct usb_serial_driver qcdevice = {
 	.usb_driver          = &qcdriver,
 	.num_ports           = 1,
 	.probe               = qcprobe,
+	.open		     = usb_wwan_open,
+	.close		     = usb_wwan_close,
+	.write		     = usb_wwan_write,
+	.write_room	     = usb_wwan_write_room,
+	.chars_in_buffer     = usb_wwan_chars_in_buffer,
+	.attach		     = usb_wwan_startup,
+	.disconnect	     = usb_wwan_disconnect,
+	.release	     = usb_wwan_release,
+#ifdef CONFIG_PM
+	.suspend	     = usb_wwan_suspend,
+	.resume		     = usb_wwan_resume,
+#endif
 };
 
 static int __init qcinit(void)
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 43a0cadd578..a36e2313eed 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -1,6 +1,7 @@
 /*
  * Safe Encapsulated USB Serial Driver
  *
+ *      Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
  *      Copyright (C) 2001 Lineo
  *      Copyright (C) 2001 Hewlett-Packard
  *
@@ -84,8 +85,8 @@ static int debug;
 static int safe = 1;
 static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 
-#define DRIVER_VERSION "v0.0b"
-#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
 #define DRIVER_DESC "USB Safe Encapsulated Serial"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -212,191 +213,80 @@ static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs)
 	return fcs;
 }
 
-static void safe_read_bulk_callback(struct urb *urb)
+static void safe_process_read_urb(struct urb *urb)
 {
-	struct usb_serial_port *port =  urb->context;
+	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned char length = urb->actual_length;
+	int actual_length;
 	struct tty_struct *tty;
-	int result;
-	int status = urb->status;
+	__u16 fcs;
 
-	dbg("%s", __func__);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
+	if (!length)
 		return;
-	}
 
-	dbg("safe_read_bulk_callback length: %d",
-					port->read_urb->actual_length);
-#ifdef ECHO_RCV
-	{
-		int i;
-		unsigned char *cp = port->read_urb->transfer_buffer;
-		for (i = 0; i < port->read_urb->actual_length; i++) {
-			if ((i % 32) == 0)
-				printk("\nru[%02x] ", i);
-			printk("%02x ", *cp++);
-		}
-		printk("\n");
-	}
-#endif
 	tty = tty_port_tty_get(&port->port);
-	if (safe) {
-		__u16 fcs;
-		fcs = fcs_compute10(data, length, CRC10_INITFCS);
-		if (!fcs) {
-			int actual_length = data[length - 2] >> 2;
-			if (actual_length <= (length - 2)) {
-				dev_info(&urb->dev->dev, "%s - actual: %d\n",
-					 __func__, actual_length);
-				tty_insert_flip_string(tty,
-							data, actual_length);
-				tty_flip_buffer_push(tty);
-			} else {
-				dev_err(&port->dev,
-					"%s - inconsistent lengths %d:%d\n",
-					__func__, actual_length, length);
-			}
-		} else {
-			dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
-		}
-	} else {
-		tty_insert_flip_string(tty, data, length);
-		tty_flip_buffer_push(tty);
-	}
-	tty_kref_put(tty);
-
-	/* Continue trying to always read  */
-	usb_fill_bulk_urb(urb, port->serial->dev,
-			usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-			urb->transfer_buffer, urb->transfer_buffer_length,
-			safe_read_bulk_callback, port);
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed resubmitting read urb, error %d\n",
-			__func__, result);
-		/* FIXME: Need a mechanism to retry later if this happens */
-}
-
-static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	unsigned char *data;
-	int result;
-	int i;
-	int packet_length;
-
-	dbg("safe_write port: %p %d urb: %p count: %d",
-				port, port->number, port->write_urb, count);
-
-	if (!port->write_urb) {
-		dbg("%s - write urb NULL", __func__);
-		return 0;
-	}
-
-	dbg("safe_write write_urb: %d transfer_buffer_length",
-	     port->write_urb->transfer_buffer_length);
-
-	if (!port->write_urb->transfer_buffer_length) {
-		dbg("%s - write urb transfer_buffer_length zero", __func__);
-		return 0;
-	}
-	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
-		return 0;
-	}
-	spin_lock_bh(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock_bh(&port->lock);
-		dbg("%s - already writing", __func__);
-		return 0;
-	}
-	port->write_urb_busy = 1;
-	spin_unlock_bh(&port->lock);
-
-	packet_length = port->bulk_out_size;	/* get max packetsize */
-
-	i = packet_length - (safe ? 2 : 0);	/* get bytes to send */
-	count = (count > i) ? i : count;
-
-
-	/* get the data into the transfer buffer */
-	data = port->write_urb->transfer_buffer;
-	memset(data, '0', packet_length);
-
-	memcpy(data, buf, count);
-
-	if (safe) {
-		__u16 fcs;
-
-		/* pad if necessary */
-		if (!padded)
-			packet_length = count + 2;
-		/* set count */
-		data[packet_length - 2] = count << 2;
-		data[packet_length - 1] = 0;
+	if (!tty)
+		return;
 
-		/* compute fcs and insert into trailer */
-		fcs = fcs_compute10(data, packet_length, CRC10_INITFCS);
-		data[packet_length - 2] |= fcs >> 8;
-		data[packet_length - 1] |= fcs & 0xff;
+	if (!safe)
+		goto out;
 
-		/* set length to send */
-		port->write_urb->transfer_buffer_length = packet_length;
-	} else {
-		port->write_urb->transfer_buffer_length = count;
+	fcs = fcs_compute10(data, length, CRC10_INITFCS);
+	if (fcs) {
+		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
+		goto err;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __func__, count,
-					port->write_urb->transfer_buffer);
-#ifdef ECHO_TX
-	{
-		int i;
-		unsigned char *cp = port->write_urb->transfer_buffer;
-		for (i = 0; i < port->write_urb->transfer_buffer_length; i++) {
-			if ((i % 32) == 0)
-				printk("\nsu[%02x] ", i);
-			printk("%02x ", *cp++);
-		}
-		printk("\n");
-	}
-#endif
-	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
-	if (result) {
-		port->write_urb_busy = 0;
-		dev_err(&port->dev,
-			"%s - failed submitting write urb, error %d\n",
-			__func__, result);
-		return 0;
+	actual_length = data[length - 2] >> 2;
+	if (actual_length > (length - 2)) {
+		dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n",
+				__func__, actual_length, length);
+		goto err;
 	}
-	dbg("%s urb: %p submitted", __func__, port->write_urb);
-
-	return count;
+	dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length);
+	length = actual_length;
+out:
+	tty_insert_flip_string(tty, data, length);
+	tty_flip_buffer_push(tty);
+err:
+	tty_kref_put(tty);
 }
 
-static int safe_write_room(struct tty_struct *tty)
+static int safe_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
 {
-	struct usb_serial_port *port = tty->driver_data;
-	int room = 0;		/* Default: no room */
-	unsigned long flags;
+	unsigned char *buf = dest;
+	int count;
+	int trailer_len;
+	int pkt_len;
+	__u16 fcs;
+
+	trailer_len = safe ? 2 : 0;
+
+	count = kfifo_out_locked(&port->write_fifo, buf, size - trailer_len,
+								&port->lock);
+	if (!safe)
+		return count;
+
+	/* pad if necessary */
+	if (padded) {
+		pkt_len = size;
+		memset(buf + count, '0', pkt_len - count - trailer_len);
+	} else {
+		pkt_len = count + trailer_len;
+	}
 
-	dbg("%s", __func__);
+	/* set count */
+	buf[pkt_len - 2] = count << 2;
+	buf[pkt_len - 1] = 0;
 
-	spin_lock_irqsave(&port->lock, flags);
-	if (port->write_urb_busy)
-		room = port->bulk_out_size - (safe ? 2 : 0);
-	spin_unlock_irqrestore(&port->lock, flags);
+	/* compute fcs and insert into trailer */
+	fcs = fcs_compute10(buf, pkt_len, CRC10_INITFCS);
+	buf[pkt_len - 2] |= fcs >> 8;
+	buf[pkt_len - 1] |= fcs & 0xff;
 
-	if (room)
-		dbg("safe_write_room returns %d", room);
-	return room;
+	return pkt_len;
 }
 
 static int safe_startup(struct usb_serial *serial)
@@ -421,9 +311,8 @@ static struct usb_serial_driver safe_device = {
 	.id_table =		id_table,
 	.usb_driver =		&safe_driver,
 	.num_ports =		1,
-	.write =		safe_write,
-	.write_room =		safe_write_room,
-	.read_bulk_callback =	safe_read_bulk_callback,
+	.process_read_urb =	safe_process_read_urb,
+	.prepare_write_buffer =	safe_prepare_write_buffer,
 	.attach =		safe_startup,
 };
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 5d39191e724..329d311a35d 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -1,6 +1,7 @@
 /*
  * spcp8x5 USB to serial adaptor driver
  *
+ * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com)
  * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
  * Copyright (C) 2006 S1 Corp.
  *
@@ -29,7 +30,7 @@
 
 
 /* Version Information */
-#define DRIVER_VERSION 	"v0.04"
+#define DRIVER_VERSION	"v0.10"
 #define DRIVER_DESC 	"SPCP8x5 USB to serial adaptor driver"
 
 static int debug;
@@ -64,11 +65,6 @@ struct spcp8x5_usb_ctrl_arg {
 	u16	length;
 };
 
-/* wait 30s before close */
-#define SPCP8x5_CLOSING_WAIT	(30*HZ)
-
-#define SPCP8x5_BUF_SIZE	1024
-
 
 /* spcp8x5 spec register define */
 #define MCR_CONTROL_LINE_RTS		0x02
@@ -155,133 +151,6 @@ enum spcp8x5_type {
 	SPCP835_TYPE,
 };
 
-/* 1st in 1st out buffer 4 driver */
-struct ringbuf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
-/* alloc the ring buf and alloc the buffer itself */
-static inline struct ringbuf *alloc_ringbuf(unsigned int size)
-{
-	struct ringbuf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(*pb), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/* free the ring buf and the buffer itself */
-static inline void free_ringbuf(struct ringbuf *pb)
-{
-	if (pb != NULL) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/* clear pipo , juest repoint the pointer here */
-static inline void clear_ringbuf(struct ringbuf *pb)
-{
-	if (pb != NULL)
-		pb->buf_get = pb->buf_put;
-}
-
-/* get the number of data in the pipo */
-static inline unsigned int ringbuf_avail_data(struct ringbuf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
-}
-
-/* get the number of space in the pipo */
-static inline unsigned int ringbuf_avail_space(struct ringbuf *pb)
-{
-	if (pb == NULL)
-		return 0;
-	return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
-}
-
-/* put count data into pipo */
-static unsigned int put_ringbuf(struct ringbuf *pb, const char *buf,
-				unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = ringbuf_avail_space(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-	return count;
-}
-
-/* get count data from pipo */
-static unsigned int get_ringbuf(struct ringbuf *pb, char *buf,
-				unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL || buf == NULL)
-		return 0;
-
-	len = ringbuf_avail_data(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
-}
-
 static struct usb_driver spcp8x5_driver = {
 	.name =			"spcp8x5",
 	.probe =		usb_serial_probe,
@@ -293,8 +162,6 @@ static struct usb_driver spcp8x5_driver = {
 
 struct spcp8x5_private {
 	spinlock_t 	lock;
-	struct ringbuf	*buf;
-	int 		write_urb_in_use;
 	enum spcp8x5_type	type;
 	wait_queue_head_t	delta_msr_wait;
 	u8 			line_control;
@@ -330,24 +197,15 @@ static int spcp8x5_startup(struct usb_serial *serial)
 			goto cleanup;
 
 		spin_lock_init(&priv->lock);
-		priv->buf = alloc_ringbuf(SPCP8x5_BUF_SIZE);
-		if (priv->buf == NULL)
-			goto cleanup2;
-
 		init_waitqueue_head(&priv->delta_msr_wait);
 		priv->type = type;
 		usb_set_serial_port_data(serial->port[i] , priv);
-
 	}
 
 	return 0;
-
-cleanup2:
-	kfree(priv);
 cleanup:
 	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		free_ringbuf(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i] , NULL);
 	}
@@ -358,15 +216,9 @@ cleanup:
 static void spcp8x5_release(struct usb_serial *serial)
 {
 	int i;
-	struct spcp8x5_private *priv;
 
-	for (i = 0; i < serial->num_ports; i++) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			free_ringbuf(priv->buf);
-			kfree(priv);
-		}
-	}
+	for (i = 0; i < serial->num_ports; i++)
+		kfree(usb_get_serial_port_data(serial->port[i]));
 }
 
 /* set the modem control line of the device.
@@ -470,33 +322,6 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 	spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 }
 
-/* close the serial port. We should wait for data sending to device 1st and
- * then kill all urb. */
-static void spcp8x5_close(struct usb_serial_port *port)
-{
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	int result;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/* clear out any remaining data in the buffer */
-	clear_ringbuf(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* kill urb */
-	if (port->write_urb != NULL) {
-		result = usb_unlink_urb(port->write_urb);
-		if (result)
-			dev_dbg(&port->dev,
-				"usb_unlink_urb(write_urb) = %d\n", result);
-	}
-	result = usb_unlink_urb(port->read_urb);
-	if (result)
-		dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
-}
-
 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
 	/* for the 1st time call this function */
@@ -620,7 +445,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 }
 
 /* open the serial port. do some usb system call. set termios and get the line
- * status of the device. then submit the read urb */
+ * status of the device. */
 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
@@ -655,52 +480,21 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 	priv->line_status = status & 0xf0 ;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	dbg("%s - submitting read urb", __func__);
-	port->read_urb->dev = serial->dev;
-	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (ret) {
-		spcp8x5_close(port);
-		return -EPROTO;
-	}
 	port->port.drain_delay = 256;
-	return 0;
+
+	return usb_serial_generic_open(tty, port);
 }
 
-/* bulk read call back function. check the status of the urb. if transfer
- * failed return. then update the status and the tty send data to tty subsys.
- * submit urb again.
- */
-static void spcp8x5_read_bulk_callback(struct urb *urb)
+static void spcp8x5_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
-	int result = urb->status;
 	u8 status;
 	char tty_flag;
 
-	dev_dbg(&port->dev, "start, result = %d, urb->actual_length = %d\n,",
-		result, urb->actual_length);
-
-	/* check the urb status */
-	if (result) {
-		if (result == -EPROTO) {
-			/* spcp8x5 mysteriously fails with -EPROTO */
-			/* reschedule the read */
-			urb->dev = port->serial->dev;
-			result = usb_submit_urb(urb , GFP_ATOMIC);
-			if (result)
-				dev_dbg(&port->dev,
-					"failed submitting read urb %d\n",
-					result);
-			return;
-		}
-		dev_dbg(&port->dev, "unable to handle the error, exiting.\n");
-		return;
-	}
-
 	/* get tty_flag from status */
 	tty_flag = TTY_NORMAL;
 
@@ -711,141 +505,33 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 	/* wake up the wait for termios */
 	wake_up_interruptible(&priv->delta_msr_wait);
 
-	/* break takes precedence over parity, which takes precedence over
-	 * framing errors */
-	if (status & UART_BREAK_ERROR)
-		tty_flag = TTY_BREAK;
-	else if (status & UART_PARITY_ERROR)
-		tty_flag = TTY_PARITY;
-	else if (status & UART_FRAME_ERROR)
-		tty_flag = TTY_FRAME;
-	dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
-
-	tty = tty_port_tty_get(&port->port);
-	if (tty && urb->actual_length) {
-		/* overrun is special, not associated with a char */
-		if (status & UART_OVERRUN_ERROR)
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		tty_insert_flip_string_fixed_flag(tty, data,
-						urb->actual_length, tty_flag);
-		tty_flip_buffer_push(tty);
-	}
-	tty_kref_put(tty);
-
-	/* Schedule the next read */
-	urb->dev = port->serial->dev;
-	result = usb_submit_urb(urb , GFP_ATOMIC);
-	if (result)
-		dev_dbg(&port->dev, "failed submitting read urb %d\n", result);
-}
-
-/* get data from ring buffer and then write to usb bus */
-static void spcp8x5_send(struct usb_serial_port *port)
-{
-	int count, result;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->write_urb_in_use) {
-		dev_dbg(&port->dev, "write urb still used\n");
-		spin_unlock_irqrestore(&priv->lock, flags);
+	if (!urb->actual_length)
 		return;
-	}
-
-	/* send the 1st urb for writting */
-	memset(port->write_urb->transfer_buffer , 0x00 , port->bulk_out_size);
-	count = get_ringbuf(priv->buf, port->write_urb->transfer_buffer,
-		port->bulk_out_size);
 
-	if (count == 0) {
-		spin_unlock_irqrestore(&priv->lock, flags);
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
 		return;
-	}
-
-	/* update the urb status */
-	priv->write_urb_in_use = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
-
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		dev_dbg(&port->dev, "failed submitting write urb, error %d\n",
-			result);
-		priv->write_urb_in_use = 0;
-		/* TODO: reschedule spcp8x5_send */
-	}
-
-
-	schedule_work(&port->work);
-}
 
-/* this is the call back function for write urb. NOTE we should not sleep in
- * this routine. check the urb return code and then submit the write urb again
- * to hold the write loop */
-static void spcp8x5_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	int result;
-	int status = urb->status;
+	if (status & UART_STATE_TRANSIENT_MASK) {
+		/* break takes precedence over parity, which takes precedence
+		 * over framing errors */
+		if (status & UART_BREAK_ERROR)
+			tty_flag = TTY_BREAK;
+		else if (status & UART_PARITY_ERROR)
+			tty_flag = TTY_PARITY;
+		else if (status & UART_FRAME_ERROR)
+			tty_flag = TTY_FRAME;
+		dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-	switch (status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dev_dbg(&port->dev, "urb shutting down with status: %d\n",
-			status);
-		priv->write_urb_in_use = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __func__);
-		dbg("%s - nonzero write bulk status received: %d",
-			__func__, status);
-		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_dbg(&port->dev,
-				"failed resubmitting write urb %d\n", result);
-		else
-			return;
+		/* overrun is special, not associated with a char */
+		if (status & UART_OVERRUN_ERROR)
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
 
-	priv->write_urb_in_use = 0;
-
-	/* send any buffered data */
-	spcp8x5_send(port);
-}
-
-/* write data to ring buffer. and then start the write transfer */
-static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
-			 const unsigned char *buf, int count)
-{
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dev_dbg(&port->dev, "%d bytes\n", count);
-
-	if (!count)
-		return count;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	count = put_ringbuf(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	spcp8x5_send(port);
-
-	return count;
+	tty_insert_flip_string_fixed_flag(tty, data, tty_flag,
+							urb->actual_length);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
@@ -953,36 +639,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
 	return result;
 }
 
-/* get the avail space room in ring buffer */
-static int spcp8x5_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	int room = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	room = ringbuf_avail_space(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return room;
-}
-
-/* get the number of avail data in write ring buffer */
-static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
-	int chars = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = ringbuf_avail_data(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return chars;
-}
-
 /* All of the device info needed for the spcp8x5 SIO serial converter */
 static struct usb_serial_driver spcp8x5_device = {
 	.driver = {
@@ -992,21 +648,16 @@ static struct usb_serial_driver spcp8x5_device = {
 	.id_table		= id_table,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
-	.close 			= spcp8x5_close,
 	.dtr_rts		= spcp8x5_dtr_rts,
 	.carrier_raised		= spcp8x5_carrier_raised,
-	.write 			= spcp8x5_write,
 	.set_termios 		= spcp8x5_set_termios,
 	.init_termios		= spcp8x5_init_termios,
 	.ioctl 			= spcp8x5_ioctl,
 	.tiocmget 		= spcp8x5_tiocmget,
 	.tiocmset 		= spcp8x5_tiocmset,
-	.write_room 		= spcp8x5_write_room,
-	.read_bulk_callback 	= spcp8x5_read_bulk_callback,
-	.write_bulk_callback	= spcp8x5_write_bulk_callback,
-	.chars_in_buffer 	= spcp8x5_chars_in_buffer,
 	.attach 		= spcp8x5_startup,
 	.release 		= spcp8x5_release,
+	.process_read_urb	= spcp8x5_process_read_urb,
 };
 
 static int __init spcp8x5_init(void)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e1bfda33f5b..90979a1f531 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -30,7 +30,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioctl.h>
 #include <linux/serial.h>
-#include <linux/circ_buf.h>
+#include <linux/kfifo.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
@@ -40,7 +40,7 @@
 
 /* Defines */
 
-#define TI_DRIVER_VERSION	"v0.9"
+#define TI_DRIVER_VERSION	"v0.10"
 #define TI_DRIVER_AUTHOR	"Al Borchers <alborchers@steinerpoint.com>"
 #define TI_DRIVER_DESC		"TI USB 3410/5052 Serial Driver"
 
@@ -82,7 +82,7 @@ struct ti_port {
 	spinlock_t		tp_lock;
 	int			tp_read_urb_state;
 	int			tp_write_urb_in_use;
-	struct circ_buf		*tp_write_buf;
+	struct kfifo		write_fifo;
 };
 
 struct ti_device {
@@ -144,15 +144,6 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 
 static int ti_download_firmware(struct ti_device *tdev);
 
-/* circular buffer */
-static struct circ_buf *ti_buf_alloc(void);
-static void ti_buf_free(struct circ_buf *cb);
-static void ti_buf_clear(struct circ_buf *cb);
-static int ti_buf_data_avail(struct circ_buf *cb);
-static int ti_buf_space_avail(struct circ_buf *cb);
-static int ti_buf_put(struct circ_buf *cb, const char *buf, int count);
-static int ti_buf_get(struct circ_buf *cb, char *buf, int count);
-
 
 /* Data */
 
@@ -450,8 +441,8 @@ static int ti_startup(struct usb_serial *serial)
 		tport->tp_closing_wait = closing_wait;
 		init_waitqueue_head(&tport->tp_msr_wait);
 		init_waitqueue_head(&tport->tp_write_wait);
-		tport->tp_write_buf = ti_buf_alloc();
-		if (tport->tp_write_buf == NULL) {
+		if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE,
+								GFP_KERNEL)) {
 			dev_err(&dev->dev, "%s - out of memory\n", __func__);
 			kfree(tport);
 			status = -ENOMEM;
@@ -468,7 +459,7 @@ static int ti_startup(struct usb_serial *serial)
 free_tports:
 	for (--i; i >= 0; --i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
-		ti_buf_free(tport->tp_write_buf);
+		kfifo_free(&tport->write_fifo);
 		kfree(tport);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -490,7 +481,7 @@ static void ti_release(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		tport = usb_get_serial_port_data(serial->port[i]);
 		if (tport) {
-			ti_buf_free(tport->tp_write_buf);
+			kfifo_free(&tport->write_fifo);
 			kfree(tport);
 		}
 	}
@@ -701,7 +692,6 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *data, int count)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -713,10 +703,8 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (tport == NULL || !tport->tp_is_open)
 		return -ENODEV;
 
-	spin_lock_irqsave(&tport->tp_lock, flags);
-	count = ti_buf_put(tport->tp_write_buf, data, count);
-	spin_unlock_irqrestore(&tport->tp_lock, flags);
-
+	count = kfifo_in_locked(&tport->write_fifo, data, count,
+							&tport->tp_lock);
 	ti_send(tport);
 
 	return count;
@@ -736,7 +724,7 @@ static int ti_write_room(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
-	room = ti_buf_space_avail(tport->tp_write_buf);
+	room = kfifo_avail(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
 	dbg("%s - returns %d", __func__, room);
@@ -757,7 +745,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
-	chars = ti_buf_data_avail(tport->tp_write_buf);
+	chars = kfifo_len(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
 	dbg("%s - returns %d", __func__, chars);
@@ -1309,7 +1297,7 @@ static void ti_send(struct ti_port *tport)
 	if (tport->tp_write_urb_in_use)
 		goto unlock;
 
-	count = ti_buf_get(tport->tp_write_buf,
+	count = kfifo_out(&tport->write_fifo,
 				port->write_urb->transfer_buffer,
 				port->bulk_out_size);
 
@@ -1504,7 +1492,7 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
 	add_wait_queue(&tport->tp_write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (ti_buf_data_avail(tport->tp_write_buf) == 0
+		if (kfifo_len(&tport->write_fifo) == 0
 		|| timeout == 0 || signal_pending(current)
 		|| tdev->td_urb_error
 		|| port->serial->disconnected)  /* disconnect */
@@ -1518,7 +1506,7 @@ static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
 
 	/* flush any remaining data in the buffer */
 	if (flush)
-		ti_buf_clear(tport->tp_write_buf);
+		kfifo_reset_out(&tport->write_fifo);
 
 	spin_unlock_irq(&tport->tp_lock);
 
@@ -1761,142 +1749,3 @@ static int ti_download_firmware(struct ti_device *tdev)
 
 	return 0;
 }
-
-
-/* Circular Buffer Functions */
-
-/*
- * ti_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-
-static struct circ_buf *ti_buf_alloc(void)
-{
-	struct circ_buf *cb;
-
-	cb = kmalloc(sizeof(struct circ_buf), GFP_KERNEL);
-	if (cb == NULL)
-		return NULL;
-
-	cb->buf = kmalloc(TI_WRITE_BUF_SIZE, GFP_KERNEL);
-	if (cb->buf == NULL) {
-		kfree(cb);
-		return NULL;
-	}
-
-	ti_buf_clear(cb);
-
-	return cb;
-}
-
-
-/*
- * ti_buf_free
- *
- * Free the buffer and all associated memory.
- */
-
-static void ti_buf_free(struct circ_buf *cb)
-{
-	kfree(cb->buf);
-	kfree(cb);
-}
-
-
-/*
- * ti_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-
-static void ti_buf_clear(struct circ_buf *cb)
-{
-	cb->head = cb->tail = 0;
-}
-
-
-/*
- * ti_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-
-static int ti_buf_data_avail(struct circ_buf *cb)
-{
-	return CIRC_CNT(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-}
-
-
-/*
- * ti_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-
-static int ti_buf_space_avail(struct circ_buf *cb)
-{
-	return CIRC_SPACE(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-}
-
-
-/*
- * ti_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-
-static int ti_buf_put(struct circ_buf *cb, const char *buf, int count)
-{
-	int c, ret = 0;
-
-	while (1) {
-		c = CIRC_SPACE_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(cb->buf + cb->head, buf, c);
-		cb->head = (cb->head + c) & (TI_WRITE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-
-	return ret;
-}
-
-
-/*
- * ti_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-
-static int ti_buf_get(struct circ_buf *cb, char *buf, int count)
-{
-	int c, ret = 0;
-
-	while (1) {
-		c = CIRC_CNT_TO_END(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0)
-			break;
-		memcpy(buf, cb->buf + cb->tail, c);
-		cb->tail = (cb->tail + c) & (TI_WRITE_BUF_SIZE-1);
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-
-	return ret;
-}
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 3873660d821..941c2d409f8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -289,7 +289,7 @@ static void serial_down(struct tty_port *tport)
 	 * The console is magical.  Do not hang up the console hardware
 	 * or there will be tears.
 	 */
-	if (port->console)
+	if (port->port.console)
 		return;
 	if (drv->close)
 		drv->close(port);
@@ -328,7 +328,7 @@ static void serial_cleanup(struct tty_struct *tty)
 	/* The console is magical.  Do not hang up the console hardware
 	 * or there will be tears.
 	 */
-	if (port->console)
+	if (port->port.console)
 		return;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -548,8 +548,12 @@ static void usb_serial_port_work(struct work_struct *work)
 
 static void kill_traffic(struct usb_serial_port *port)
 {
+	int i;
+
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+		usb_kill_urb(port->write_urbs[i]);
 	/*
 	 * This is tricky.
 	 * Some drivers submit the read_urb in the
@@ -568,6 +572,7 @@ static void kill_traffic(struct usb_serial_port *port)
 static void port_release(struct device *dev)
 {
 	struct usb_serial_port *port = to_usb_serial_port(dev);
+	int i;
 
 	dbg ("%s - %s", __func__, dev_name(dev));
 
@@ -582,6 +587,10 @@ static void port_release(struct device *dev)
 	usb_free_urb(port->write_urb);
 	usb_free_urb(port->interrupt_in_urb);
 	usb_free_urb(port->interrupt_out_urb);
+	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
+		usb_free_urb(port->write_urbs[i]);
+		kfree(port->bulk_out_buffers[i]);
+	}
 	kfifo_free(&port->write_fifo);
 	kfree(port->bulk_in_buffer);
 	kfree(port->bulk_out_buffer);
@@ -901,7 +910,9 @@ int usb_serial_probe(struct usb_interface *interface,
 			dev_err(&interface->dev, "No free urbs available\n");
 			goto probe_error;
 		}
-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		buffer_size = serial->type->bulk_in_size;
+		if (!buffer_size)
+			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_in_size = buffer_size;
 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -918,6 +929,8 @@ int usb_serial_probe(struct usb_interface *interface,
 	}
 
 	for (i = 0; i < num_bulk_out; ++i) {
+		int j;
+
 		endpoint = bulk_out_endpoint[i];
 		port = serial->port[i];
 		port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -927,7 +940,9 @@ int usb_serial_probe(struct usb_interface *interface,
 		}
 		if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
 			goto probe_error;
-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+		buffer_size = serial->type->bulk_out_size;
+		if (!buffer_size)
+			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 		port->bulk_out_size = buffer_size;
 		port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 		port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -941,6 +956,28 @@ int usb_serial_probe(struct usb_interface *interface,
 					endpoint->bEndpointAddress),
 				port->bulk_out_buffer, buffer_size,
 				serial->type->write_bulk_callback, port);
+		for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
+			set_bit(j, &port->write_urbs_free);
+			port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+			if (!port->write_urbs[j]) {
+				dev_err(&interface->dev,
+						"No free urbs available\n");
+				goto probe_error;
+			}
+			port->bulk_out_buffers[j] = kmalloc(buffer_size,
+								GFP_KERNEL);
+			if (!port->bulk_out_buffers[j]) {
+				dev_err(&interface->dev,
+					"Couldn't allocate bulk_out_buffer\n");
+				goto probe_error;
+			}
+			usb_fill_bulk_urb(port->write_urbs[j], dev,
+					usb_sndbulkpipe(dev,
+						endpoint->bEndpointAddress),
+					port->bulk_out_buffers[j], buffer_size,
+					serial->type->write_bulk_callback,
+					port);
+		}
 	}
 
 	if (serial->type->read_int_callback) {
@@ -1294,6 +1331,8 @@ static void fixup_generic(struct usb_serial_driver *device)
 	set_to_generic_if_null(device, write_bulk_callback);
 	set_to_generic_if_null(device, disconnect);
 	set_to_generic_if_null(device, release);
+	set_to_generic_if_null(device, process_read_urb);
+	set_to_generic_if_null(device, prepare_write_buffer);
 }
 
 int usb_serial_register(struct usb_serial_driver *driver)
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
new file mode 100644
index 00000000000..2be298a1305
--- /dev/null
+++ b/drivers/usb/serial/usb-wwan.h
@@ -0,0 +1,67 @@
+/*
+ * Definitions for USB serial mobile broadband cards
+ */
+
+#ifndef __LINUX_USB_USB_WWAN
+#define __LINUX_USB_USB_WWAN
+
+extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
+extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
+extern void usb_wwan_close(struct usb_serial_port *port);
+extern int usb_wwan_startup(struct usb_serial *serial);
+extern void usb_wwan_disconnect(struct usb_serial *serial);
+extern void usb_wwan_release(struct usb_serial *serial);
+extern int usb_wwan_write_room(struct tty_struct *tty);
+extern void usb_wwan_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ktermios *old);
+extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
+extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+			     unsigned int set, unsigned int clear);
+extern int usb_wwan_send_setup(struct usb_serial_port *port);
+extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count);
+extern int usb_wwan_chars_in_buffer(struct tty_struct *tty);
+#ifdef CONFIG_PM
+extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message);
+extern int usb_wwan_resume(struct usb_serial *serial);
+#endif
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+#define OUT_BUFLEN 4096
+
+struct usb_wwan_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+	int (*send_setup) (struct usb_serial_port *port);
+	void *private;
+};
+
+struct usb_wwan_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb *in_urbs[N_IN_URB];
+	u8 *in_buffer[N_IN_URB];
+	/* Output endpoints and buffer for this port */
+	struct urb *out_urbs[N_OUT_URB];
+	u8 *out_buffer[N_OUT_URB];
+	unsigned long out_busy;	/* Bit vector of URBs in use */
+	int opened;
+	struct usb_anchor delayed;
+
+	/* Settings for the port */
+	int rts_state;		/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;		/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+
+	unsigned long tx_start_time[N_OUT_URB];
+};
+
+#endif /* __LINUX_USB_USB_WWAN */
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 28026b47344..f2ed6a31be7 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -16,7 +16,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#define URB_DEBUG_MAX_IN_FLIGHT_URBS	4000
 #define USB_DEBUG_MAX_PACKET_SIZE	8
 #define USB_DEBUG_BRK_SIZE		8
 static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
@@ -44,12 +43,6 @@ static struct usb_driver debug_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(tty, port);
-}
-
 /* This HW really does not support a serial break, so one will be
  * emulated when ever the break state is set to true.
  */
@@ -69,7 +62,7 @@ static void usb_debug_read_bulk_callback(struct urb *urb)
 	    memcmp(urb->transfer_buffer, USB_DEBUG_BRK,
 		   USB_DEBUG_BRK_SIZE) == 0) {
 		usb_serial_handle_break(port);
-		usb_serial_generic_resubmit_read_urb(port, GFP_ATOMIC);
+		usb_serial_generic_submit_read_urb(port, GFP_ATOMIC);
 		return;
 	}
 
@@ -83,8 +76,7 @@ static struct usb_serial_driver debug_device = {
 	},
 	.id_table =		id_table,
 	.num_ports =		1,
-	.open =			usb_debug_open,
-	.max_in_flight_urbs =	URB_DEBUG_MAX_IN_FLIGHT_URBS,
+	.bulk_out_size =	USB_DEBUG_MAX_PACKET_SIZE,
 	.break_ctl =		usb_debug_break_ctl,
 	.read_bulk_callback =	usb_debug_read_bulk_callback,
 };
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
new file mode 100644
index 00000000000..0c70b4a621b
--- /dev/null
+++ b/drivers/usb/serial/usb_wwan.c
@@ -0,0 +1,665 @@
+/*
+  USB Driver layer for GSM modems
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  This driver is free software; you can redistribute it and/or modify
+  it under the terms of Version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History: see the git log.
+
+  Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
+  This driver exists because the "normal" serial driver doesn't work too well
+  with GSM modems. Issues:
+  - data loss -- one single Receive URB is not nearly enough
+  - controlling the baud rate doesn't make sense
+*/
+
+#define DRIVER_VERSION "v0.7.2"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "USB Driver for GSM modems"
+
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "usb-wwan.h"
+
+static int debug;
+
+void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+
+	struct usb_wwan_intf_private *intfdata;
+
+	dbg("%s", __func__);
+
+	intfdata = port->serial->private;
+
+	if (!intfdata->send_setup)
+		return;
+
+	portdata = usb_get_serial_port_data(port);
+	mutex_lock(&serial->disc_mutex);
+	portdata->rts_state = on;
+	portdata->dtr_state = on;
+	if (serial->dev)
+		intfdata->send_setup(port);
+	mutex_unlock(&serial->disc_mutex);
+}
+EXPORT_SYMBOL(usb_wwan_dtr_rts);
+
+void usb_wwan_set_termios(struct tty_struct *tty,
+			  struct usb_serial_port *port,
+			  struct ktermios *old_termios)
+{
+	struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+	dbg("%s", __func__);
+
+	/* Doesn't support option setting */
+	tty_termios_copy_hw(tty->termios, old_termios);
+
+	if (intfdata->send_setup)
+		intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_set_termios);
+
+int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	unsigned int value;
+	struct usb_wwan_port_private *portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+	    ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+	    ((portdata->cts_state) ? TIOCM_CTS : 0) |
+	    ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+	    ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+	    ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+EXPORT_SYMBOL(usb_wwan_tiocmget);
+
+int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+		      unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
+
+	if (!intfdata->send_setup)
+		return -EINVAL;
+
+	/* FIXME: what locks portdata fields ? */
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return intfdata->send_setup(port);
+}
+EXPORT_SYMBOL(usb_wwan_tiocmset);
+
+/* Write */
+int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+		   const unsigned char *buf, int count)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+	int left, todo;
+	struct urb *this_urb = NULL;	/* spurious */
+	int err;
+	unsigned long flags;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = port->serial->private;
+
+	dbg("%s: write (%d chars)", __func__, count);
+
+	i = 0;
+	left = count;
+	for (i = 0; left > 0 && i < N_OUT_URB; i++) {
+		todo = left;
+		if (todo > OUT_BUFLEN)
+			todo = OUT_BUFLEN;
+
+		this_urb = portdata->out_urbs[i];
+		if (test_and_set_bit(i, &portdata->out_busy)) {
+			if (time_before(jiffies,
+					portdata->tx_start_time[i] + 10 * HZ))
+				continue;
+			usb_unlink_urb(this_urb);
+			continue;
+		}
+		dbg("%s: endpoint %d buf %d", __func__,
+		    usb_pipeendpoint(this_urb->pipe), i);
+
+		err = usb_autopm_get_interface_async(port->serial->interface);
+		if (err < 0)
+			break;
+
+		/* send the data */
+		memcpy(this_urb->transfer_buffer, buf, todo);
+		this_urb->transfer_buffer_length = todo;
+
+		spin_lock_irqsave(&intfdata->susp_lock, flags);
+		if (intfdata->suspended) {
+			usb_anchor_urb(this_urb, &portdata->delayed);
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+		} else {
+			intfdata->in_flight++;
+			spin_unlock_irqrestore(&intfdata->susp_lock, flags);
+			err = usb_submit_urb(this_urb, GFP_ATOMIC);
+			if (err) {
+				dbg("usb_submit_urb %p (write bulk) failed "
+				    "(%d)", this_urb, err);
+				clear_bit(i, &portdata->out_busy);
+				spin_lock_irqsave(&intfdata->susp_lock, flags);
+				intfdata->in_flight--;
+				spin_unlock_irqrestore(&intfdata->susp_lock,
+						       flags);
+				continue;
+			}
+		}
+
+		portdata->tx_start_time[i] = jiffies;
+		buf += todo;
+		left -= todo;
+	}
+
+	count -= left;
+	dbg("%s: wrote (did %d)", __func__, count);
+	return count;
+}
+EXPORT_SYMBOL(usb_wwan_write);
+
+static void usb_wwan_indat_callback(struct urb *urb)
+{
+	int err;
+	int endpoint;
+	struct usb_serial_port *port;
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+	int status = urb->status;
+
+	dbg("%s: %p", __func__, urb);
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = urb->context;
+
+	if (status) {
+		dbg("%s: nonzero status: %d on endpoint %02x.",
+		    __func__, status, endpoint);
+	} else {
+		tty = tty_port_tty_get(&port->port);
+		if (urb->actual_length) {
+			tty_insert_flip_string(tty, data, urb->actual_length);
+			tty_flip_buffer_push(tty);
+		} else
+			dbg("%s: empty read urb received", __func__);
+		tty_kref_put(tty);
+
+		/* Resubmit urb so we continue receiving */
+		if (status != -ESHUTDOWN) {
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err && err != -EPERM)
+				printk(KERN_ERR "%s: resubmit read urb failed. "
+				       "(%d)", __func__, err);
+			else
+				usb_mark_last_busy(port->serial->dev);
+		}
+
+	}
+	return;
+}
+
+static void usb_wwan_outdat_callback(struct urb *urb)
+{
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	int i;
+
+	dbg("%s", __func__);
+
+	port = urb->context;
+	intfdata = port->serial->private;
+
+	usb_serial_port_softint(port);
+	usb_autopm_put_interface_async(port->serial->interface);
+	portdata = usb_get_serial_port_data(port);
+	spin_lock(&intfdata->susp_lock);
+	intfdata->in_flight--;
+	spin_unlock(&intfdata->susp_lock);
+
+	for (i = 0; i < N_OUT_URB; ++i) {
+		if (portdata->out_urbs[i] == urb) {
+			smp_mb__before_clear_bit();
+			clear_bit(i, &portdata->out_busy);
+			break;
+		}
+	}
+}
+
+int usb_wwan_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && !test_bit(i, &portdata->out_busy))
+			data_len += OUT_BUFLEN;
+	}
+
+	dbg("%s: %d", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_write_room);
+
+int usb_wwan_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_wwan_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i = 0; i < N_OUT_URB; i++) {
+		this_urb = portdata->out_urbs[i];
+		/* FIXME: This locking is insufficient as this_urb may
+		   go unused during the test */
+		if (this_urb && test_bit(i, &portdata->out_busy))
+			data_len += this_urb->transfer_buffer_length;
+	}
+	dbg("%s: %d", __func__, data_len);
+	return data_len;
+}
+EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
+
+int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata;
+	struct usb_serial *serial = port->serial;
+	int i, err;
+	struct urb *urb;
+
+	portdata = usb_get_serial_port_data(port);
+	intfdata = serial->private;
+
+	dbg("%s", __func__);
+
+	/* Start reading from the IN endpoint */
+	for (i = 0; i < N_IN_URB; i++) {
+		urb = portdata->in_urbs[i];
+		if (!urb)
+			continue;
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			dbg("%s: submit urb %d failed (%d) %d",
+			    __func__, i, err, urb->transfer_buffer_length);
+		}
+	}
+
+	if (intfdata->send_setup)
+		intfdata->send_setup(port);
+
+	serial->interface->needs_remote_wakeup = 1;
+	spin_lock_irq(&intfdata->susp_lock);
+	portdata->opened = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	usb_autopm_put_interface(serial->interface);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_open);
+
+void usb_wwan_close(struct usb_serial_port *port)
+{
+	int i;
+	struct usb_serial *serial = port->serial;
+	struct usb_wwan_port_private *portdata;
+	struct usb_wwan_intf_private *intfdata = port->serial->private;
+
+	dbg("%s", __func__);
+	portdata = usb_get_serial_port_data(port);
+
+	if (serial->dev) {
+		/* Stop reading/writing urbs */
+		spin_lock_irq(&intfdata->susp_lock);
+		portdata->opened = 0;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		for (i = 0; i < N_IN_URB; i++)
+			usb_kill_urb(portdata->in_urbs[i]);
+		for (i = 0; i < N_OUT_URB; i++)
+			usb_kill_urb(portdata->out_urbs[i]);
+		usb_autopm_get_interface(serial->interface);
+		serial->interface->needs_remote_wakeup = 0;
+	}
+}
+EXPORT_SYMBOL(usb_wwan_close);
+
+/* Helper functions used by usb_wwan_setup_urbs */
+static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+				      int dir, void *ctx, char *buf, int len,
+				      void (*callback) (struct urb *))
+{
+	struct urb *urb;
+
+	if (endpoint == -1)
+		return NULL;	/* endpoint not needed */
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
+	if (urb == NULL) {
+		dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
+		return NULL;
+	}
+
+	/* Fill URB using supplied data. */
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev, endpoint) | dir,
+			  buf, len, callback, ctx);
+
+	return urb;
+}
+
+/* Setup urbs */
+static void usb_wwan_setup_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		/* Do indat endpoints first */
+		for (j = 0; j < N_IN_URB; ++j) {
+			portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
+								  port->
+								  bulk_in_endpointAddress,
+								  USB_DIR_IN,
+								  port,
+								  portdata->
+								  in_buffer[j],
+								  IN_BUFLEN,
+								  usb_wwan_indat_callback);
+		}
+
+		/* outdat endpoints */
+		for (j = 0; j < N_OUT_URB; ++j) {
+			portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
+								   port->
+								   bulk_out_endpointAddress,
+								   USB_DIR_OUT,
+								   port,
+								   portdata->
+								   out_buffer
+								   [j],
+								   OUT_BUFLEN,
+								   usb_wwan_outdat_callback);
+		}
+	}
+}
+
+int usb_wwan_startup(struct usb_serial *serial)
+{
+	int i, j, err;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+	u8 *buffer;
+
+	dbg("%s", __func__);
+
+	/* Now setup per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+		if (!portdata) {
+			dbg("%s: kmalloc for usb_wwan_port_private (%d) failed!.",
+			    __func__, i);
+			return 1;
+		}
+		init_usb_anchor(&portdata->delayed);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			buffer = (u8 *) __get_free_page(GFP_KERNEL);
+			if (!buffer)
+				goto bail_out_error;
+			portdata->in_buffer[j] = buffer;
+		}
+
+		for (j = 0; j < N_OUT_URB; j++) {
+			buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+			if (!buffer)
+				goto bail_out_error2;
+			portdata->out_buffer[j] = buffer;
+		}
+
+		usb_set_serial_port_data(port, portdata);
+
+		if (!port->interrupt_in_urb)
+			continue;
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err)
+			dbg("%s: submit irq_in urb failed %d", __func__, err);
+	}
+	usb_wwan_setup_urbs(serial);
+	return 0;
+
+bail_out_error2:
+	for (j = 0; j < N_OUT_URB; j++)
+		kfree(portdata->out_buffer[j]);
+bail_out_error:
+	for (j = 0; j < N_IN_URB; j++)
+		if (portdata->in_buffer[j])
+			free_page((unsigned long)portdata->in_buffer[j]);
+	kfree(portdata);
+	return 1;
+}
+EXPORT_SYMBOL(usb_wwan_startup);
+
+static void stop_read_write_urbs(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		for (j = 0; j < N_IN_URB; j++)
+			usb_kill_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			usb_kill_urb(portdata->out_urbs[j]);
+	}
+}
+
+void usb_wwan_disconnect(struct usb_serial *serial)
+{
+	dbg("%s", __func__);
+
+	stop_read_write_urbs(serial);
+}
+EXPORT_SYMBOL(usb_wwan_disconnect);
+
+void usb_wwan_release(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_port_private *portdata;
+
+	dbg("%s", __func__);
+
+	/* Now free them */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			usb_free_urb(portdata->in_urbs[j]);
+			free_page((unsigned long)
+				  portdata->in_buffer[j]);
+			portdata->in_urbs[j] = NULL;
+		}
+		for (j = 0; j < N_OUT_URB; j++) {
+			usb_free_urb(portdata->out_urbs[j]);
+			kfree(portdata->out_buffer[j]);
+			portdata->out_urbs[j] = NULL;
+		}
+	}
+
+	/* Now free per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		kfree(usb_get_serial_port_data(port));
+	}
+}
+EXPORT_SYMBOL(usb_wwan_release);
+
+#ifdef CONFIG_PM
+int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct usb_wwan_intf_private *intfdata = serial->private;
+	int b;
+
+	dbg("%s entered", __func__);
+
+	if (message.event & PM_EVENT_AUTO) {
+		spin_lock_irq(&intfdata->susp_lock);
+		b = intfdata->in_flight;
+		spin_unlock_irq(&intfdata->susp_lock);
+
+		if (b)
+			return -EBUSY;
+	}
+
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 1;
+	spin_unlock_irq(&intfdata->susp_lock);
+	stop_read_write_urbs(serial);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_wwan_suspend);
+
+static void play_delayed(struct usb_serial_port *port)
+{
+	struct usb_wwan_intf_private *data;
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err;
+
+	portdata = usb_get_serial_port_data(port);
+	data = port->serial->private;
+	while ((urb = usb_get_from_anchor(&portdata->delayed))) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (!err)
+			data->in_flight++;
+	}
+}
+
+int usb_wwan_resume(struct usb_serial *serial)
+{
+	int i, j;
+	struct usb_serial_port *port;
+	struct usb_wwan_intf_private *intfdata = serial->private;
+	struct usb_wwan_port_private *portdata;
+	struct urb *urb;
+	int err = 0;
+
+	dbg("%s entered", __func__);
+	/* get the interrupt URBs resubmitted unconditionally */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		if (!port->interrupt_in_urb) {
+			dbg("%s: No interrupt URB for port %d", __func__, i);
+			continue;
+		}
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+		dbg("Submitted interrupt URB for port %d (result %d)", i, err);
+		if (err < 0) {
+			err("%s: Error %d for interrupt URB of port%d",
+			    __func__, err, i);
+			goto err_out;
+		}
+	}
+
+	for (i = 0; i < serial->num_ports; i++) {
+		/* walk all ports */
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		/* skip closed ports */
+		spin_lock_irq(&intfdata->susp_lock);
+		if (!portdata->opened) {
+			spin_unlock_irq(&intfdata->susp_lock);
+			continue;
+		}
+
+		for (j = 0; j < N_IN_URB; j++) {
+			urb = portdata->in_urbs[j];
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err < 0) {
+				err("%s: Error %d for bulk URB %d",
+				    __func__, err, i);
+				spin_unlock_irq(&intfdata->susp_lock);
+				goto err_out;
+			}
+		}
+		play_delayed(port);
+		spin_unlock_irq(&intfdata->susp_lock);
+	}
+	spin_lock_irq(&intfdata->susp_lock);
+	intfdata->suspended = 0;
+	spin_unlock_irq(&intfdata->susp_lock);
+err_out:
+	return err;
+}
+EXPORT_SYMBOL(usb_wwan_resume);
+#endif
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 094942707c7..eb76aaef426 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -38,17 +38,9 @@
 /* function prototypes for a handspring visor */
 static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void visor_close(struct usb_serial_port *port);
-static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count);
-static int  visor_write_room(struct tty_struct *tty);
-static void visor_throttle(struct tty_struct *tty);
-static void visor_unthrottle(struct tty_struct *tty);
 static int  visor_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
 static int  visor_calc_num_ports(struct usb_serial *serial);
-static void visor_release(struct usb_serial *serial);
-static void visor_write_bulk_callback(struct urb *urb);
-static void visor_read_bulk_callback(struct urb *urb);
 static void visor_read_int_callback(struct urb *urb);
 static int  clie_3_5_startup(struct usb_serial *serial);
 static int  treo_attach(struct usb_serial *serial);
@@ -194,18 +186,14 @@ static struct usb_serial_driver handspring_device = {
 	.usb_driver =		&visor_driver,
 	.id_table =		id_table,
 	.num_ports =		2,
+	.bulk_out_size =	256,
 	.open =			visor_open,
 	.close =		visor_close,
-	.throttle =		visor_throttle,
-	.unthrottle =		visor_unthrottle,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		treo_attach,
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
-	.release =		visor_release,
-	.write =		visor_write,
-	.write_room =		visor_write_room,
-	.write_bulk_callback =	visor_write_bulk_callback,
-	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
 };
 
@@ -219,18 +207,14 @@ static struct usb_serial_driver clie_5_device = {
 	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_5_table,
 	.num_ports =		2,
+	.bulk_out_size =	256,
 	.open =			visor_open,
 	.close =		visor_close,
-	.throttle =		visor_throttle,
-	.unthrottle =		visor_unthrottle,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		clie_5_attach,
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
-	.release =		visor_release,
-	.write =		visor_write,
-	.write_room =		visor_write_room,
-	.write_bulk_callback =	visor_write_bulk_callback,
-	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
 };
 
@@ -244,39 +228,19 @@ static struct usb_serial_driver clie_3_5_device = {
 	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_3_5_table,
 	.num_ports =		1,
+	.bulk_out_size =	256,
 	.open =			visor_open,
 	.close =		visor_close,
-	.throttle =		visor_throttle,
-	.unthrottle =		visor_unthrottle,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
 	.attach =		clie_3_5_startup,
-	.write =		visor_write,
-	.write_room =		visor_write_room,
-	.write_bulk_callback =	visor_write_bulk_callback,
-	.read_bulk_callback =	visor_read_bulk_callback,
 };
 
-struct visor_private {
-	spinlock_t lock;
-	int bytes_in;
-	int bytes_out;
-	int outstanding_urbs;
-	unsigned char throttled;
-	unsigned char actually_throttled;
-};
-
-/* number of outstanding urbs to prevent userspace DoS from happening */
-#define URB_UPPER_LIMIT	42
-
-static int stats;
-
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
 static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct usb_serial *serial = port->serial;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
 	int result = 0;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -287,26 +251,10 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 		return -ENODEV;
 	}
 
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->bytes_in = 0;
-	priv->bytes_out = 0;
-	priv->throttled = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	/* Start reading from the device */
-	usb_fill_bulk_urb(port->read_urb, serial->dev,
-			   usb_rcvbulkpipe(serial->dev,
-					    port->bulk_in_endpointAddress),
-			   port->read_urb->transfer_buffer,
-			   port->read_urb->transfer_buffer_length,
-			   visor_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result) {
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-							__func__, result);
+	result = usb_serial_generic_open(tty, port);
+	if (result)
 		goto exit;
-	}
 
 	if (port->interrupt_in_urb) {
 		dbg("%s - adding interrupt input for treo", __func__);
@@ -323,13 +271,12 @@ exit:
 
 static void visor_close(struct usb_serial_port *port)
 {
-	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	/* shutdown our urbs */
-	usb_kill_urb(port->read_urb);
+	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 
 	mutex_lock(&port->serial->disc_mutex);
@@ -346,192 +293,6 @@ static void visor_close(struct usb_serial_port *port)
 		}
 	}
 	mutex_unlock(&port->serial->disc_mutex);
-
-	if (stats)
-		dev_info(&port->dev, "Bytes In = %d  Bytes Out = %d\n",
-			 priv->bytes_in, priv->bytes_out);
-}
-
-
-static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
-					const unsigned char *buf, int count)
-{
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct urb *urb;
-	unsigned char *buffer;
-	unsigned long flags;
-	int status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit", __func__);
-		return 0;
-	}
-	priv->outstanding_urbs++;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	buffer = kmalloc(count, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&port->dev, "out of memory\n");
-		count = -ENOMEM;
-		goto error_no_buffer;
-	}
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		dev_err(&port->dev, "no more free urbs\n");
-		count = -ENOMEM;
-		goto error_no_urb;
-	}
-
-	memcpy(buffer, buf, count);
-
-	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
-
-	usb_fill_bulk_urb(urb, serial->dev,
-			   usb_sndbulkpipe(serial->dev,
-					    port->bulk_out_endpointAddress),
-			   buffer, count,
-			   visor_write_bulk_callback, port);
-
-	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status) {
-		dev_err(&port->dev,
-		   "%s - usb_submit_urb(write bulk) failed with status = %d\n",
-							__func__, status);
-		count = status;
-		goto error;
-	} else {
-		spin_lock_irqsave(&priv->lock, flags);
-		priv->bytes_out += count;
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-
-	/* we are done with this urb, so let the host driver
-	 * really free it when it is finished with it */
-	usb_free_urb(urb);
-
-	return count;
-error:
-	usb_free_urb(urb);
-error_no_urb:
-	kfree(buffer);
-error_no_buffer:
-	spin_lock_irqsave(&priv->lock, flags);
-	--priv->outstanding_urbs;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return count;
-}
-
-
-static int visor_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/*
-	 * We really can take anything the user throws at us
-	 * but let's pick a nice big number to tell the tty
-	 * layer that we have lots of free space, unless we don't.
-	 */
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit", __func__);
-		return 0;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 2048;
-}
-
-
-static void visor_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	int status = urb->status;
-	unsigned long flags;
-
-	/* free up the transfer buffer, as usb_free_urb() does not do this */
-	kfree(urb->transfer_buffer);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status)
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	--priv->outstanding_urbs;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	usb_serial_port_softint(port);
-}
-
-
-static void visor_read_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = urb->context;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	unsigned char *data = urb->transfer_buffer;
-	int status = urb->status;
-	struct tty_struct *tty;
-	int result;
-	int available_room = 0;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero read bulk status received: %d",
-		    __func__, status);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-
-	if (urb->actual_length) {
-		tty = tty_port_tty_get(&port->port);
-		if (tty) {
-			tty_insert_flip_string(tty, data,
-						urb->actual_length);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
-		spin_lock(&priv->lock);
-		if (tty)
-			priv->bytes_in += available_room;
-
-	} else {
-		spin_lock(&priv->lock);
-	}
-
-	/* Continue trying to always read if we should */
-	if (!priv->throttled) {
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-				   usb_rcvbulkpipe(port->serial->dev,
-					   port->bulk_in_endpointAddress),
-				   port->read_urb->transfer_buffer,
-				   port->read_urb->transfer_buffer_length,
-				   visor_read_bulk_callback, port);
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-			    "%s - failed resubmitting read urb, error %d\n",
-							__func__, result);
-	} else
-		priv->actually_throttled = 1;
-	spin_unlock(&priv->lock);
 }
 
 static void visor_read_int_callback(struct urb *urb)
@@ -575,41 +336,6 @@ exit:
 							__func__, result);
 }
 
-static void visor_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irq(&priv->lock);
-	priv->throttled = 1;
-	spin_unlock_irq(&priv->lock);
-}
-
-
-static void visor_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct visor_private *priv = usb_get_serial_port_data(port);
-	int result, was_throttled;
-
-	dbg("%s - port %d", __func__, port->number);
-	spin_lock_irq(&priv->lock);
-	priv->throttled = 0;
-	was_throttled = priv->actually_throttled;
-	priv->actually_throttled = 0;
-	spin_unlock_irq(&priv->lock);
-
-	if (was_throttled) {
-		port->read_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed submitting read urb, error %d\n",
-							__func__, result);
-	}
-}
-
 static int palm_os_3_probe(struct usb_serial *serial,
 						const struct usb_device_id *id)
 {
@@ -777,28 +503,6 @@ static int visor_calc_num_ports(struct usb_serial *serial)
 	return num_ports;
 }
 
-static int generic_startup(struct usb_serial *serial)
-{
-	struct usb_serial_port **ports = serial->port;
-	struct visor_private *priv;
-	int i;
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-		if (!priv) {
-			while (i-- != 0) {
-				priv = usb_get_serial_port_data(ports[i]);
-				usb_set_serial_port_data(ports[i], NULL);
-				kfree(priv);
-			}
-			return -ENOMEM;
-		}
-		spin_lock_init(&priv->lock);
-		usb_set_serial_port_data(ports[i], priv);
-	}
-	return 0;
-}
-
 static int clie_3_5_startup(struct usb_serial *serial)
 {
 	struct device *dev = &serial->dev->dev;
@@ -849,7 +553,7 @@ static int clie_3_5_startup(struct usb_serial *serial)
 		goto out;
 	}
 
-	result = generic_startup(serial);
+	result = 0;
 out:
 	kfree(data);
 
@@ -867,7 +571,7 @@ static int treo_attach(struct usb_serial *serial)
 		(le16_to_cpu(serial->dev->descriptor.idVendor)
 						== KYOCERA_VENDOR_ID)) ||
 		(serial->num_interrupt_in == 0))
-		goto generic_startup;
+		return 0;
 
 	dbg("%s", __func__);
 
@@ -897,8 +601,7 @@ static int treo_attach(struct usb_serial *serial)
 	COPY_PORT(serial->port[1], swap_port);
 	kfree(swap_port);
 
-generic_startup:
-	return generic_startup(serial);
+	return 0;
 }
 
 static int clie_5_attach(struct usb_serial *serial)
@@ -921,20 +624,7 @@ static int clie_5_attach(struct usb_serial *serial)
 	serial->port[0]->bulk_out_endpointAddress =
 				serial->port[1]->bulk_out_endpointAddress;
 
-	return generic_startup(serial);
-}
-
-static void visor_release(struct usb_serial *serial)
-{
-	struct visor_private *priv;
-	int i;
-
-	dbg("%s", __func__);
-
-	for (i = 0; i < serial->num_ports; i++) {
-		priv = usb_get_serial_port_data(serial->port[i]);
-		kfree(priv);
-	}
+	return 0;
 }
 
 static int __init visor_init(void)
@@ -1018,8 +708,6 @@ MODULE_LICENSE("GPL");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(stats, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(stats, "Enables statistics or not");
 
 module_param(vendor, ushort, 0);
 MODULE_PARM_DESC(vendor, "User specified vendor ID");
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index 57229cf6647..88db4d06aef 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -9,8 +9,9 @@
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- * 
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver.
+ *
  */
 
 #ifndef __LINUX_USB_SERIAL_VISOR_H
@@ -65,7 +66,7 @@
 #define ACEECA_MEZ1000_ID		0x0001
 
 #define KYOCERA_VENDOR_ID		0x0C88
-#define KYOCERA_7135_ID			0x0021 
+#define KYOCERA_7135_ID			0x0021
 
 #define FOSSIL_VENDOR_ID		0x0E67
 #define FOSSIL_ABACUS_ID		0x0002
@@ -145,7 +146,7 @@ struct visor_connection_info {
  * The maximum number of connections currently supported is 2
  */
 struct palm_ext_connection_info {
-	__u8 num_ports;		
+	__u8 num_ports;
 	__u8 endpoint_numbers_different;
 	__le16 reserved1;
 	struct {
diff --git a/drivers/usb/serial/zio.c b/drivers/usb/serial/zio.c
new file mode 100644
index 00000000000..f5796727883
--- /dev/null
+++ b/drivers/usb/serial/zio.c
@@ -0,0 +1,64 @@
+/*
+ * ZIO Motherboard USB driver
+ *
+ * Copyright (C) 2010 Zilogic Systems <code@zilogic.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x1CBE, 0x0103) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver zio_driver = {
+	.name =		"zio",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id =	1,
+};
+
+static struct usb_serial_driver zio_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"zio",
+	},
+	.id_table =		id_table,
+	.usb_driver =		&zio_driver,
+	.num_ports =		1,
+};
+
+static int __init zio_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&zio_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&zio_driver);
+	if (retval)
+		usb_serial_deregister(&zio_device);
+	return retval;
+}
+
+static void __exit zio_exit(void)
+{
+	usb_deregister(&zio_driver);
+	usb_serial_deregister(&zio_device);
+}
+
+module_init(zio_init);
+module_exit(zio_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index fdba2f69d4c..e9cbc1467f7 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -490,13 +490,13 @@ static int isd200_action( struct us_data *us, int action,
 			  void* pointer, int value )
 {
 	union ata_cdb ata;
-	struct scsi_device srb_dev;
+	/* static to prevent this large struct being placed on the valuable stack */
+	static struct scsi_device srb_dev;
 	struct isd200_info *info = (struct isd200_info *)us->extra;
 	struct scsi_cmnd *srb = &info->srb;
 	int status;
 
 	memset(&ata, 0, sizeof(ata));
-	memset(&srb_dev, 0, sizeof(srb_dev));
 	srb->cmnd = info->cmnd;
 	srb->device = &srb_dev;
 	++srb->serial_number;
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 198bb3ed95b..1943be5a291 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -201,8 +201,8 @@ static int onetouch_connect_input(struct us_data *ss)
 	if (!onetouch || !input_dev)
 		goto fail1;
 
-	onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
-					  GFP_KERNEL, &onetouch->data_dma);
+	onetouch->data = usb_alloc_coherent(udev, ONETOUCH_PKT_LEN,
+					    GFP_KERNEL, &onetouch->data_dma);
 	if (!onetouch->data)
 		goto fail1;
 
@@ -264,8 +264,8 @@ static int onetouch_connect_input(struct us_data *ss)
 	return 0;
 
  fail3:	usb_free_urb(onetouch->irq);
- fail2:	usb_buffer_free(udev, ONETOUCH_PKT_LEN,
-			onetouch->data, onetouch->data_dma);
+ fail2:	usb_free_coherent(udev, ONETOUCH_PKT_LEN,
+			  onetouch->data, onetouch->data_dma);
  fail1:	kfree(onetouch);
 	input_free_device(input_dev);
 	return error;
@@ -279,8 +279,8 @@ static void onetouch_release_input(void *onetouch_)
 		usb_kill_urb(onetouch->irq);
 		input_unregister_device(onetouch->dev);
 		usb_free_urb(onetouch->irq);
-		usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
-				onetouch->data, onetouch->data_dma);
+		usb_free_coherent(onetouch->udev, ONETOUCH_PKT_LEN,
+				  onetouch->data, onetouch->data_dma);
 	}
 }
 
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index f253edec3bb..44716427c51 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -147,11 +147,9 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	 * hasn't been mapped for DMA.  Yes, this is clunky, but it's
 	 * easier than always having the caller tell us whether the
 	 * transfer buffer has already been mapped. */
-	us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP;
 	if (us->current_urb->transfer_buffer == us->iobuf)
 		us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	us->current_urb->transfer_dma = us->iobuf_dma;
-	us->current_urb->setup_dma = us->cr_dma;
 
 	/* submit the URB */
 	status = usb_submit_urb(us->current_urb, GFP_NOIO);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index ccf1dbbb87e..2c897eefadd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -365,15 +365,6 @@ UNUSUAL_DEV(  0x04cb, 0x0100, 0x0000, 0x2210,
 		"FinePix 1400Zoom",
 		US_SC_UFI, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY | US_FL_SINGLE_LUN),
 
-/* Reported by Peter Wächtler <pwaechtler@loewe-komp.de>
- * The device needs the flags only.
- */
-UNUSUAL_DEV(  0x04ce, 0x0002, 0x0074, 0x0074,
-		"ScanLogic",
-		"SL11R-IDE",
-		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_INQUIRY),
-
 /* Reported by Ondrej Zary <linux@rainbow-software.org>
  * The device reports one sector more and breaks when that sector is accessed
  */
@@ -1853,6 +1844,21 @@ UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Hans de Goede <hdegoede@redhat.com>
+ * These Appotech controllers are found in Picture Frames, they provide a
+ * (buggy) emulation of a cdrom drive which contains the windows software
+ * Uploading of pictures happens over the corresponding /dev/sg device. */
+UNUSUAL_DEV( 0x1908, 0x1315, 0x0000, 0x0000,
+		"BUILDWIN",
+		"Photo Frame",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+UNUSUAL_DEV( 0x1908, 0x1320, 0x0000, 0x0000,
+		"BUILDWIN",
+		"Photo Frame",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index bbeeb92a213..a7d0bf9d92a 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -407,15 +407,14 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
 	/* Store our private data in the interface */
 	usb_set_intfdata(intf, us);
 
-	/* Allocate the device-related DMA-mapped buffers */
-	us->cr = usb_buffer_alloc(us->pusb_dev, sizeof(*us->cr),
-			GFP_KERNEL, &us->cr_dma);
+	/* Allocate the control/setup and DMA-mapped buffers */
+	us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL);
 	if (!us->cr) {
 		US_DEBUGP("usb_ctrlrequest allocation failed\n");
 		return -ENOMEM;
 	}
 
-	us->iobuf = usb_buffer_alloc(us->pusb_dev, US_IOBUF_SIZE,
+	us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE,
 			GFP_KERNEL, &us->iobuf_dma);
 	if (!us->iobuf) {
 		US_DEBUGP("I/O buffer allocation failed\n");
@@ -499,9 +498,6 @@ static void adjust_quirks(struct us_data *us)
 		}
 	}
 	us->fflags = (us->fflags & ~mask) | f;
-	dev_info(&us->pusb_intf->dev, "Quirks match for "
-			"vid %04x pid %04x: %x\n",
-			vid, pid, f);
 }
 
 /* Get the unusual_devs entries and the string descriptors */
@@ -511,6 +507,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 	struct usb_device *dev = us->pusb_dev;
 	struct usb_interface_descriptor *idesc =
 		&us->pusb_intf->cur_altsetting->desc;
+	struct device *pdev = &us->pusb_intf->dev;
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
@@ -524,7 +521,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 	adjust_quirks(us);
 
 	if (us->fflags & US_FL_IGNORE_DEVICE) {
-		printk(KERN_INFO USB_STORAGE "device ignored\n");
+		dev_info(pdev, "device ignored\n");
 		return -ENODEV;
 	}
 
@@ -535,6 +532,12 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 	if (dev->speed != USB_SPEED_HIGH)
 		us->fflags &= ~US_FL_GO_SLOW;
 
+	if (us->fflags)
+		dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n",
+				le16_to_cpu(dev->descriptor.idVendor),
+				le16_to_cpu(dev->descriptor.idProduct),
+				us->fflags);
+
 	/* Log a message if a non-generic unusual_dev entry contains an
 	 * unnecessary subclass or protocol override.  This may stimulate
 	 * reports from users that will help us remove unneeded entries
@@ -555,20 +558,20 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 			us->protocol == idesc->bInterfaceProtocol)
 			msg += 2;
 		if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
-			printk(KERN_NOTICE USB_STORAGE "This device "
-				"(%04x,%04x,%04x S %02x P %02x)"
-				" has %s in unusual_devs.h (kernel"
-				" %s)\n"
-				"   Please send a copy of this message to "
-				"<linux-usb@vger.kernel.org> and "
-				"<usb-storage@lists.one-eyed-alien.net>\n",
-				le16_to_cpu(ddesc->idVendor),
-				le16_to_cpu(ddesc->idProduct),
-				le16_to_cpu(ddesc->bcdDevice),
-				idesc->bInterfaceSubClass,
-				idesc->bInterfaceProtocol,
-				msgs[msg],
-				utsname()->release);
+			dev_notice(pdev, "This device "
+					"(%04x,%04x,%04x S %02x P %02x)"
+					" has %s in unusual_devs.h (kernel"
+					" %s)\n"
+					"   Please send a copy of this message to "
+					"<linux-usb@vger.kernel.org> and "
+					"<usb-storage@lists.one-eyed-alien.net>\n",
+					le16_to_cpu(ddesc->idVendor),
+					le16_to_cpu(ddesc->idProduct),
+					le16_to_cpu(ddesc->bcdDevice),
+					idesc->bInterfaceSubClass,
+					idesc->bInterfaceProtocol,
+					msgs[msg],
+					utsname()->release);
 	}
 
 	return 0;
@@ -718,8 +721,8 @@ static int usb_stor_acquire_resources(struct us_data *us)
 	/* Start up our control thread */
 	th = kthread_run(usb_stor_control_thread, us, "usb-storage");
 	if (IS_ERR(th)) {
-		printk(KERN_WARNING USB_STORAGE 
-		       "Unable to start control thread\n");
+		dev_warn(&us->pusb_intf->dev,
+				"Unable to start control thread\n");
 		return PTR_ERR(th);
 	}
 	us->ctl_thread = th;
@@ -757,13 +760,9 @@ static void dissociate_dev(struct us_data *us)
 {
 	US_DEBUGP("-- %s\n", __func__);
 
-	/* Free the device-related DMA-mapped buffers */
-	if (us->cr)
-		usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
-				us->cr_dma);
-	if (us->iobuf)
-		usb_buffer_free(us->pusb_dev, US_IOBUF_SIZE, us->iobuf,
-				us->iobuf_dma);
+	/* Free the buffers */
+	kfree(us->cr);
+	usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma);
 
 	/* Remove our private data from the interface */
 	usb_set_intfdata(us->pusb_intf, NULL);
@@ -816,13 +815,14 @@ static void release_everything(struct us_data *us)
 static int usb_stor_scan_thread(void * __us)
 {
 	struct us_data *us = (struct us_data *)__us;
+	struct device *dev = &us->pusb_intf->dev;
 
-	dev_dbg(&us->pusb_intf->dev, "device found\n");
+	dev_dbg(dev, "device found\n");
 
 	set_freezable();
 	/* Wait for the timeout to expire or for a disconnect */
 	if (delay_use > 0) {
-		dev_dbg(&us->pusb_intf->dev, "waiting for device to settle "
+		dev_dbg(dev, "waiting for device to settle "
 				"before scanning\n");
 		wait_event_freezable_timeout(us->delay_wait,
 				test_bit(US_FLIDX_DONT_SCAN, &us->dflags),
@@ -840,7 +840,7 @@ static int usb_stor_scan_thread(void * __us)
 			mutex_unlock(&us->dev_mutex);
 		}
 		scsi_scan_host(us_to_host(us));
-		dev_dbg(&us->pusb_intf->dev, "scan complete\n");
+		dev_dbg(dev, "scan complete\n");
 
 		/* Should we unbind if no devices were detected? */
 	}
@@ -876,8 +876,8 @@ int usb_stor_probe1(struct us_data **pus,
 	 */
 	host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
 	if (!host) {
-		printk(KERN_WARNING USB_STORAGE
-			"Unable to allocate the scsi host\n");
+		dev_warn(&intf->dev,
+				"Unable to allocate the scsi host\n");
 		return -ENOMEM;
 	}
 
@@ -925,6 +925,7 @@ int usb_stor_probe2(struct us_data *us)
 {
 	struct task_struct *th;
 	int result;
+	struct device *dev = &us->pusb_intf->dev;
 
 	/* Make sure the transport and protocol have both been set */
 	if (!us->transport || !us->proto_handler) {
@@ -949,18 +950,18 @@ int usb_stor_probe2(struct us_data *us)
 		goto BadDevice;
 	snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s",
 					dev_name(&us->pusb_intf->dev));
-	result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev);
+	result = scsi_add_host(us_to_host(us), dev);
 	if (result) {
-		printk(KERN_WARNING USB_STORAGE
-			"Unable to add the scsi host\n");
+		dev_warn(dev,
+				"Unable to add the scsi host\n");
 		goto BadDevice;
 	}
 
 	/* Start up the thread for delayed SCSI-device scanning */
 	th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
 	if (IS_ERR(th)) {
-		printk(KERN_WARNING USB_STORAGE 
-		       "Unable to start the device-scanning thread\n");
+		dev_warn(dev,
+				"Unable to start the device-scanning thread\n");
 		complete(&us->scanning_done);
 		quiesce_and_remove_host(us);
 		result = PTR_ERR(th);
@@ -1046,12 +1047,12 @@ static int __init usb_stor_init(void)
 {
 	int retval;
 
-	printk(KERN_INFO "Initializing USB Mass Storage driver...\n");
+	pr_info("Initializing USB Mass Storage driver...\n");
 
 	/* register the driver, return usb_register return code if error */
 	retval = usb_register(&usb_storage_driver);
 	if (retval == 0) {
-		printk(KERN_INFO "USB Mass Storage support registered.\n");
+		pr_info("USB Mass Storage support registered.\n");
 		usb_usual_set_present(USB_US_TYPE_STOR);
 	}
 	return retval;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 69717134231..89d3bfff98d 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -139,8 +139,7 @@ struct us_data {
 	struct usb_ctrlrequest	*cr;		 /* control requests	 */
 	struct usb_sg_request	current_sg;	 /* scatter-gather req.  */
 	unsigned char		*iobuf;		 /* I/O buffer		 */
-	dma_addr_t		cr_dma;		 /* buffer DMA addresses */
-	dma_addr_t		iobuf_dma;
+	dma_addr_t		iobuf_dma;	 /* buffer DMA addresses */
 	struct task_struct	*ctl_thread;	 /* the control thread   */
 
 	/* mutual exclusion and synchronization structures */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 61522787f39..d110588b56f 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -387,8 +387,8 @@ static void skel_write_bulk_callback(struct urb *urb)
 	}
 
 	/* free up our allocated buffer */
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 	up(&dev->limit_sem);
 }
 
@@ -442,8 +442,8 @@ static ssize_t skel_write(struct file *file, const char *user_buffer,
 		goto error;
 	}
 
-	buf = usb_buffer_alloc(dev->udev, writesize, GFP_KERNEL,
-			       &urb->transfer_dma);
+	buf = usb_alloc_coherent(dev->udev, writesize, GFP_KERNEL,
+				 &urb->transfer_dma);
 	if (!buf) {
 		retval = -ENOMEM;
 		goto error;
@@ -491,7 +491,7 @@ error_unanchor:
 	usb_unanchor_urb(urb);
 error:
 	if (urb) {
-		usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma);
+		usb_free_coherent(dev->udev, writesize, buf, urb->transfer_dma);
 		usb_free_urb(urb);
 	}
 	up(&dev->limit_sem);
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 608d61a105f..84b744c428a 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -474,8 +474,6 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
 		struct wa_xfer_ctl *xfer_ctl =
 			container_of(xfer_hdr0, struct wa_xfer_ctl, hdr);
 		xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0;
-		BUG_ON(xfer->urb->transfer_flags & URB_NO_SETUP_DMA_MAP
-		       && xfer->urb->setup_packet == NULL);
 		memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet,
 		       sizeof(xfer_ctl->baSetupData));
 		break;
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 759cda55f7c..3d94c4247f4 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -58,9 +58,7 @@
 #include <linux/mutex.h>
 #include <linux/kref.h>
 #include <linux/workqueue.h>
-/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not
- *        public */
-#include <linux/../../drivers/usb/core/hcd.h>
+#include <linux/usb/hcd.h>
 #include <linux/uwb.h>
 #include <linux/usb/wusb.h>
 
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
index 8e4eacc5bb5..748a74bd85e 100644
--- a/drivers/watchdog/pcwd_usb.c
+++ b/drivers/watchdog/pcwd_usb.c
@@ -600,8 +600,8 @@ static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd)
 {
 	usb_free_urb(usb_pcwd->intr_urb);
 	if (usb_pcwd->intr_buffer != NULL)
-		usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size,
-				usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
+		usb_free_coherent(usb_pcwd->udev, usb_pcwd->intr_size,
+				  usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
 	kfree(usb_pcwd);
 }
 
@@ -671,7 +671,7 @@ static int usb_pcwd_probe(struct usb_interface *interface,
 				le16_to_cpu(endpoint->wMaxPacketSize) : 8);
 
 	/* set up the memory buffer's */
-	usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size,
+	usb_pcwd->intr_buffer = usb_alloc_coherent(udev, usb_pcwd->intr_size,
 					GFP_ATOMIC, &usb_pcwd->intr_dma);
 	if (!usb_pcwd->intr_buffer) {
 		printk(KERN_ERR PFX "Out of memory\n");
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 98158de91d2..b86ab8eff79 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -110,31 +110,14 @@ static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count,
 	struct timerfd_ctx *ctx = file->private_data;
 	ssize_t res;
 	u64 ticks = 0;
-	DECLARE_WAITQUEUE(wait, current);
 
 	if (count < sizeof(ticks))
 		return -EINVAL;
 	spin_lock_irq(&ctx->wqh.lock);
-	res = -EAGAIN;
-	if (!ctx->ticks && !(file->f_flags & O_NONBLOCK)) {
-		__add_wait_queue(&ctx->wqh, &wait);
-		for (res = 0;;) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (ctx->ticks) {
-				res = 0;
-				break;
-			}
-			if (signal_pending(current)) {
-				res = -ERESTARTSYS;
-				break;
-			}
-			spin_unlock_irq(&ctx->wqh.lock);
-			schedule();
-			spin_lock_irq(&ctx->wqh.lock);
-		}
-		__remove_wait_queue(&ctx->wqh, &wait);
-		__set_current_state(TASK_RUNNING);
-	}
+	if (file->f_flags & O_NONBLOCK)
+		res = -EAGAIN;
+	else
+		res = wait_event_interruptible_locked_irq(ctx->wqh, ctx->ticks);
 	if (ctx->ticks) {
 		ticks = ctx->ticks;
 		if (ctx->expired && ctx->tintv.tv64) {
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 739f1fd1cc1..d5922a87799 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -45,27 +45,14 @@ struct wusb_dev;
 
 struct ep_device;
 
-/* For SS devices */
-/**
- * struct usb_host_ss_ep_comp - Valid for SuperSpeed devices only
- * @desc: endpoint companion descriptor, wMaxPacketSize in native byteorder
- * @extra: descriptors following this endpoint companion descriptor
- * @extralen: how many bytes of "extra" are valid
- */
-struct usb_host_ss_ep_comp {
-	struct usb_ss_ep_comp_descriptor	desc;
-	unsigned char				*extra;   /* Extra descriptors */
-	int					extralen;
-};
-
 /**
  * struct usb_host_endpoint - host-side endpoint descriptor and queue
  * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
+ * @ss_ep_comp: SuperSpeed companion descriptor for this endpoint
  * @urb_list: urbs queued to this endpoint; maintained by usbcore
  * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
  *	with one or more transfer descriptors (TDs) per urb
  * @ep_dev: ep_device for sysfs info
- * @ss_ep_comp: companion descriptor information for this endpoint
  * @extra: descriptors following this endpoint in the configuration
  * @extralen: how many bytes of "extra" are valid
  * @enabled: URBs may be submitted to this endpoint
@@ -74,11 +61,11 @@ struct usb_host_ss_ep_comp {
  * descriptor within an active interface in a given USB configuration.
  */
 struct usb_host_endpoint {
-	struct usb_endpoint_descriptor	desc;
+	struct usb_endpoint_descriptor		desc;
+	struct usb_ss_ep_comp_descriptor	ss_ep_comp;
 	struct list_head		urb_list;
 	void				*hcpriv;
-	struct ep_device 		*ep_dev;	/* For sysfs info */
-	struct usb_host_ss_ep_comp	*ss_ep_comp;	/* For SS devices */
+	struct ep_device		*ep_dev;	/* For sysfs info */
 
 	unsigned char *extra;   /* Extra descriptors */
 	int extralen;
@@ -109,8 +96,8 @@ enum usb_interface_condition {
 /**
  * struct usb_interface - what usb device drivers talk to
  * @altsetting: array of interface structures, one for each alternate
- * 	setting that may be selected.  Each one includes a set of
- * 	endpoint configurations.  They will be in no particular order.
+ *	setting that may be selected.  Each one includes a set of
+ *	endpoint configurations.  They will be in no particular order.
  * @cur_altsetting: the current altsetting.
  * @num_altsetting: number of altsettings defined.
  * @intf_assoc: interface association descriptor
@@ -197,8 +184,6 @@ struct usb_interface {
 	struct work_struct reset_ws;	/* for resets in atomic context */
 };
 #define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
-#define	interface_to_usbdev(intf) \
-	container_of(intf->dev.parent, struct usb_device, dev)
 
 static inline void *usb_get_intfdata(struct usb_interface *intf)
 {
@@ -215,7 +200,7 @@ void usb_put_intf(struct usb_interface *intf);
 
 /* this maximum is arbitrary */
 #define USB_MAXINTERFACES	32
-#define USB_MAXIADS		USB_MAXINTERFACES/2
+#define USB_MAXIADS		(USB_MAXINTERFACES/2)
 
 /**
  * struct usb_interface_cache - long-term representation of a device interface
@@ -425,7 +410,6 @@ struct usb_tt;
  * @connect_time: time device was first connected
  * @do_remote_wakeup:  remote wakeup should be enabled
  * @reset_resume: needs reset instead of resume
- * @autosuspend_disabled: autosuspend disabled by the user
  * @wusb_dev: if this is a Wireless USB device, link to the WUSB
  *	specific data for the device.
  * @slot_id: Slot ID assigned by xHCI
@@ -436,7 +420,7 @@ struct usb_tt;
  */
 struct usb_device {
 	int		devnum;
-	char		devpath [16];
+	char		devpath[16];
 	u32		route;
 	enum usb_device_state	state;
 	enum usb_device_speed	speed;
@@ -469,7 +453,7 @@ struct usb_device {
 	unsigned persist_enabled:1;
 	unsigned have_langid:1;
 	unsigned authorized:1;
- 	unsigned authenticated:1;
+	unsigned authenticated:1;
 	unsigned wusb:1;
 	int string_langid;
 
@@ -501,13 +485,17 @@ struct usb_device {
 
 	unsigned do_remote_wakeup:1;
 	unsigned reset_resume:1;
-	unsigned autosuspend_disabled:1;
 #endif
 	struct wusb_dev *wusb_dev;
 	int slot_id;
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
 
+static inline struct usb_device *interface_to_usbdev(struct usb_interface *intf)
+{
+	return to_usb_device(intf->dev.parent);
+}
+
 extern struct usb_device *usb_get_dev(struct usb_device *dev);
 extern void usb_put_dev(struct usb_device *dev);
 
@@ -522,12 +510,11 @@ extern int usb_lock_device_for_reset(struct usb_device *udev,
 extern int usb_reset_device(struct usb_device *dev);
 extern void usb_queue_reset_device(struct usb_interface *dev);
 
-extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 
 /* USB autosuspend and autoresume */
 #ifdef CONFIG_USB_SUSPEND
-extern int usb_enable_autosuspend(struct usb_device *udev);
-extern int usb_disable_autosuspend(struct usb_device *udev);
+extern void usb_enable_autosuspend(struct usb_device *udev);
+extern void usb_disable_autosuspend(struct usb_device *udev);
 
 extern int usb_autopm_get_interface(struct usb_interface *intf);
 extern void usb_autopm_put_interface(struct usb_interface *intf);
@@ -572,6 +559,16 @@ static inline void usb_mark_last_busy(struct usb_device *udev)
 /* for drivers using iso endpoints */
 extern int usb_get_current_frame_number(struct usb_device *usb_dev);
 
+/* Sets up a group of bulk endpoints to support multiple stream IDs. */
+extern int usb_alloc_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+extern void usb_free_streams(struct usb_interface *interface,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
+
 /* used these for multi-interface device registration */
 extern int usb_driver_claim_interface(struct usb_driver *driver,
 			struct usb_interface *iface, void *priv);
@@ -667,7 +664,7 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
  * This macro is used to create a struct usb_device_id that matches a
  * specific device.
  */
-#define USB_DEVICE(vend,prod) \
+#define USB_DEVICE(vend, prod) \
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
 	.idVendor = (vend), \
 	.idProduct = (prod)
@@ -958,17 +955,25 @@ extern int usb_disabled(void);
 #define URB_ISO_ASAP		0x0002	/* iso-only, urb->start_frame
 					 * ignored */
 #define URB_NO_TRANSFER_DMA_MAP	0x0004	/* urb->transfer_dma valid on submit */
-#define URB_NO_SETUP_DMA_MAP	0x0008	/* urb->setup_dma valid on submit */
 #define URB_NO_FSBR		0x0020	/* UHCI-specific */
 #define URB_ZERO_PACKET		0x0040	/* Finish bulk OUT with short packet */
 #define URB_NO_INTERRUPT	0x0080	/* HINT: no non-error interrupt
 					 * needed */
 #define URB_FREE_BUFFER		0x0100	/* Free transfer buffer with the URB */
 
+/* The following flags are used internally by usbcore and HCDs */
 #define URB_DIR_IN		0x0200	/* Transfer from device to host */
 #define URB_DIR_OUT		0
 #define URB_DIR_MASK		URB_DIR_IN
 
+#define URB_DMA_MAP_SINGLE	0x00010000	/* Non-scatter-gather mapping */
+#define URB_DMA_MAP_PAGE	0x00020000	/* HCD-unsupported S-G */
+#define URB_DMA_MAP_SG		0x00040000	/* HCD-supported S-G */
+#define URB_MAP_LOCAL		0x00080000	/* HCD-local-memory mapping */
+#define URB_SETUP_MAP_SINGLE	0x00100000	/* Setup packet DMA mapped */
+#define URB_SETUP_MAP_LOCAL	0x00200000	/* HCD-local setup packet */
+#define URB_DMA_SG_COMBINED	0x00400000	/* S-G entries were combined */
+
 struct usb_iso_packet_descriptor {
 	unsigned int offset;
 	unsigned int length;		/* expected length */
@@ -1045,12 +1050,8 @@ typedef void (*usb_complete_t)(struct urb *);
  * @setup_packet: Only used for control transfers, this points to eight bytes
  *	of setup data.  Control transfers always start by sending this data
  *	to the device.  Then transfer_buffer is read or written, if needed.
- * @setup_dma: For control transfers with URB_NO_SETUP_DMA_MAP set, the
- *	device driver has provided this DMA address for the setup packet.
- *	The host controller driver should use this in preference to
- *	setup_packet, but the HCD may chose to ignore the address if it must
- *	copy the setup packet into internal structures.  Therefore, setup_packet
- *	must always point to a valid buffer.
+ * @setup_dma: DMA pointer for the setup packet.  The caller must not use
+ *	this field; setup_packet must point to a valid buffer.
  * @start_frame: Returns the initial frame for isochronous transfers.
  * @number_of_packets: Lists the number of ISO transfer buffers.
  * @interval: Specifies the polling interval for interrupt or isochronous
@@ -1082,13 +1083,14 @@ typedef void (*usb_complete_t)(struct urb *);
  * bounce buffer or talking to an IOMMU),
  * although they're cheap on commodity x86 and ppc hardware.
  *
- * Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags,
- * which tell the host controller driver that no such mapping is needed since
+ * Alternatively, drivers may pass the URB_NO_TRANSFER_DMA_MAP transfer flag,
+ * which tells the host controller driver that no such mapping is needed for
+ * the transfer_buffer since
  * the device driver is DMA-aware.  For example, a device driver might
  * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map().
- * When these transfer flags are provided, host controller drivers will
- * attempt to use the dma addresses found in the transfer_dma and/or
- * setup_dma fields rather than determining a dma address themselves.
+ * When this transfer flag is provided, host controller drivers will
+ * attempt to use the dma address found in the transfer_dma
+ * field rather than determining a dma address themselves.
  *
  * Note that transfer_buffer must still be set if the controller
  * does not support DMA (as indicated by bus.uses_dma) and when talking
@@ -1111,11 +1113,9 @@ typedef void (*usb_complete_t)(struct urb *);
  * should always terminate with a short packet, even if it means adding an
  * extra zero length packet.
  *
- * Control URBs must provide a setup_packet.  The setup_packet and
- * transfer_buffer may each be mapped for DMA or not, independently of
- * the other.  The transfer_flags bits URB_NO_TRANSFER_DMA_MAP and
- * URB_NO_SETUP_DMA_MAP indicate which buffers have already been mapped.
- * URB_NO_SETUP_DMA_MAP is ignored for non-control URBs.
+ * Control URBs must provide a valid pointer in the setup_packet field.
+ * Unlike the transfer_buffer, the setup_packet may not be mapped for DMA
+ * beforehand.
  *
  * Interrupt URBs must provide an interval, saying how often (in milliseconds
  * or, for highspeed devices, 125 microsecond units)
@@ -1186,14 +1186,15 @@ struct urb {
 					 * current owner */
 	struct list_head anchor_list;	/* the URB may be anchored */
 	struct usb_anchor *anchor;
-	struct usb_device *dev; 	/* (in) pointer to associated device */
+	struct usb_device *dev;		/* (in) pointer to associated device */
 	struct usb_host_endpoint *ep;	/* (internal) pointer to endpoint */
 	unsigned int pipe;		/* (in) pipe information */
+	unsigned int stream_id;		/* (in) stream ID */
 	int status;			/* (return) non-ISO status */
 	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
 	void *transfer_buffer;		/* (in) associated data buffer */
 	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
-	struct usb_sg_request *sg;	/* (in) scatter gather buffer list */
+	struct scatterlist *sg;		/* (in) scatter gather buffer list */
 	int num_sgs;			/* (in) number of entries in the sg list */
 	u32 transfer_buffer_length;	/* (in) data buffer length */
 	u32 actual_length;		/* (return) actual transfer length */
@@ -1371,18 +1372,6 @@ void *usb_alloc_coherent(struct usb_device *dev, size_t size,
 void usb_free_coherent(struct usb_device *dev, size_t size,
 	void *addr, dma_addr_t dma);
 
-/* Compatible macros while we switch over */
-static inline void *usb_buffer_alloc(struct usb_device *dev, size_t size,
-				     gfp_t mem_flags, dma_addr_t *dma)
-{
-	return usb_alloc_coherent(dev, size, mem_flags, dma);
-}
-static inline void usb_buffer_free(struct usb_device *dev, size_t size,
-				   void *addr, dma_addr_t dma)
-{
-	return usb_free_coherent(dev, size, addr, dma);
-}
-
 #if 0
 struct urb *usb_buffer_map(struct urb *urb);
 void usb_buffer_dmasync(struct urb *urb);
@@ -1467,8 +1456,6 @@ struct usb_sg_request {
 
 	struct usb_device	*dev;
 	int			pipe;
-	struct scatterlist	*sg;
-	int			nents;
 
 	int			entries;
 	struct urb		**urbs;
@@ -1536,23 +1523,31 @@ static inline unsigned int __create_pipe(struct usb_device *dev,
 }
 
 /* Create various pipes... */
-#define usb_sndctrlpipe(dev,endpoint)	\
+#define usb_sndctrlpipe(dev, endpoint)	\
 	((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvctrlpipe(dev,endpoint)	\
+#define usb_rcvctrlpipe(dev, endpoint)	\
 	((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-#define usb_sndisocpipe(dev,endpoint)	\
+#define usb_sndisocpipe(dev, endpoint)	\
 	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvisocpipe(dev,endpoint)	\
+#define usb_rcvisocpipe(dev, endpoint)	\
 	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-#define usb_sndbulkpipe(dev,endpoint)	\
+#define usb_sndbulkpipe(dev, endpoint)	\
 	((PIPE_BULK << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvbulkpipe(dev,endpoint)	\
+#define usb_rcvbulkpipe(dev, endpoint)	\
 	((PIPE_BULK << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-#define usb_sndintpipe(dev,endpoint)	\
+#define usb_sndintpipe(dev, endpoint)	\
 	((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvintpipe(dev,endpoint)	\
+#define usb_rcvintpipe(dev, endpoint)	\
 	((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
 
+static inline struct usb_host_endpoint *
+usb_pipe_endpoint(struct usb_device *dev, unsigned int pipe)
+{
+	struct usb_host_endpoint **eps;
+	eps = usb_pipein(pipe) ? dev->ep_in : dev->ep_out;
+	return eps[usb_pipeendpoint(pipe)];
+}
+
 /*-------------------------------------------------------------------------*/
 
 static inline __u16
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
index 29fd73b0bff..51410e0200c 100644
--- a/include/linux/usb/Kbuild
+++ b/include/linux/usb/Kbuild
@@ -1,6 +1,7 @@
 header-y += audio.h
 header-y += cdc.h
 header-y += ch9.h
+header-y += ch11.h
 header-y += gadgetfs.h
 header-y += midi.h
 header-y += g_printer.h
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
index baf41c8616e..ba99af275a3 100644
--- a/include/linux/usb/atmel_usba_udc.h
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -15,7 +15,7 @@ struct usba_ep_data {
 
 struct usba_platform_data {
 	int			vbus_pin;
-	int		 	vbus_pin_inverted;
+	int			vbus_pin_inverted;
 	int			num_ep;
 	struct usba_ep_data	ep[0];
 };
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index c0ef18dc2da..5d646c38875 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -101,7 +101,7 @@ struct uac_ac_header_descriptor_v1 {
 #define UAC_DT_AC_HEADER_SIZE(n)	(8 + (n))
 
 /* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) 			\
+#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n)			\
 struct uac_ac_header_descriptor_v1_##n {			\
 	__u8  bLength;						\
 	__u8  bDescriptorType;					\
@@ -169,7 +169,7 @@ struct uac_output_terminal_descriptor_v1 {
 #define UAC_DT_FEATURE_UNIT_SIZE(ch)		(7 + ((ch) + 1) * 2)
 
 /* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) 		\
+#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch)			\
 struct uac_feature_unit_descriptor_##ch {			\
 	__u8  bLength;						\
 	__u8  bDescriptorType;					\
@@ -378,7 +378,7 @@ struct uac_format_type_i_discrete_descriptor {
 	__u8  tSamFreq[][3];
 } __attribute__ ((packed));
 
-#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) 		\
+#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n)		\
 struct uac_format_type_i_discrete_descriptor_##n {		\
 	__u8  bLength;						\
 	__u8  bDescriptorType;					\
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index c24124a42ce..c117a68d04a 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -18,6 +18,7 @@
 #define USB_CDC_SUBCLASS_MDLM			0x0a
 #define USB_CDC_SUBCLASS_OBEX			0x0b
 #define USB_CDC_SUBCLASS_EEM			0x0c
+#define USB_CDC_SUBCLASS_NCM			0x0d
 
 #define USB_CDC_PROTO_NONE			0
 
@@ -49,6 +50,7 @@
 #define USB_CDC_MDLM_DETAIL_TYPE	0x13	/* mdlm_detail_desc */
 #define USB_CDC_DMM_TYPE		0x14
 #define USB_CDC_OBEX_TYPE		0x15
+#define USB_CDC_NCM_TYPE		0x1a
 
 /* "Header Functional Descriptor" from CDC spec  5.2.3.1 */
 struct usb_cdc_header_desc {
@@ -174,6 +176,15 @@ struct usb_cdc_obex_desc {
 	__le16	bcdVersion;
 } __attribute__ ((packed));
 
+/* "NCM Control Model Functional Descriptor" */
+struct usb_cdc_ncm_desc {
+	__u8	bLength;
+	__u8	bDescriptorType;
+	__u8	bDescriptorSubType;
+
+	__le16	bcdNcmVersion;
+	__u8	bmNetworkCapabilities;
+} __attribute__ ((packed));
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -197,6 +208,17 @@ struct usb_cdc_obex_desc {
 #define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER	0x42
 #define USB_CDC_SET_ETHERNET_PACKET_FILTER	0x43
 #define USB_CDC_GET_ETHERNET_STATISTIC		0x44
+#define USB_CDC_GET_NTB_PARAMETERS		0x80
+#define USB_CDC_GET_NET_ADDRESS			0x81
+#define USB_CDC_SET_NET_ADDRESS			0x82
+#define USB_CDC_GET_NTB_FORMAT			0x83
+#define USB_CDC_SET_NTB_FORMAT			0x84
+#define USB_CDC_GET_NTB_INPUT_SIZE		0x85
+#define USB_CDC_SET_NTB_INPUT_SIZE		0x86
+#define USB_CDC_GET_MAX_DATAGRAM_SIZE		0x87
+#define USB_CDC_SET_MAX_DATAGRAM_SIZE		0x88
+#define USB_CDC_GET_CRC_MODE			0x89
+#define USB_CDC_SET_CRC_MODE			0x8a
 
 /* Line Coding Structure from CDC spec 6.2.13 */
 struct usb_cdc_line_coding {
@@ -247,4 +269,76 @@ struct usb_cdc_notification {
 	__le16	wLength;
 } __attribute__ ((packed));
 
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Class Specific structures and constants
+ *
+ * CDC NCM parameter structure, CDC NCM subclass 6.2.1
+ *
+ */
+
+struct usb_cdc_ncm_ntb_parameter {
+	__le16	wLength;
+	__le16	bmNtbFormatSupported;
+	__le32	dwNtbInMaxSize;
+	__le16	wNdpInDivisor;
+	__le16	wNdpInPayloadRemainder;
+	__le16	wNdpInAlignment;
+	__le16	wPadding1;
+	__le32	dwNtbOutMaxSize;
+	__le16	wNdpOutDivisor;
+	__le16	wNdpOutPayloadRemainder;
+	__le16	wNdpOutAlignment;
+	__le16	wPadding2;
+} __attribute__ ((packed));
+
+/*
+ * CDC NCM transfer headers, CDC NCM subclass 3.2
+ */
+
+#define NCM_NTH16_SIGN		0x484D434E /* NCMH */
+#define NCM_NTH32_SIGN		0x686D636E /* ncmh */
+
+struct usb_cdc_ncm_nth16 {
+	__le32	dwSignature;
+	__le16	wHeaderLength;
+	__le16	wSequence;
+	__le16	wBlockLength;
+	__le16	wFpIndex;
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_nth32 {
+	__le32	dwSignature;
+	__le16	wHeaderLength;
+	__le16	wSequence;
+	__le32	dwBlockLength;
+	__le32	dwFpIndex;
+} __attribute__ ((packed));
+
+/*
+ * CDC NCM datagram pointers, CDC NCM subclass 3.3
+ */
+
+#define NCM_NDP16_CRC_SIGN	0x314D434E /* NCM1 */
+#define NCM_NDP16_NOCRC_SIGN	0x304D434E /* NCM0 */
+#define NCM_NDP32_CRC_SIGN	0x316D636E /* ncm1 */
+#define NCM_NDP32_NOCRC_SIGN	0x306D636E /* ncm0 */
+
+struct usb_cdc_ncm_ndp16 {
+	__le32	dwSignature;
+	__le16	wLength;
+	__le16	wNextFpIndex;
+	__u8	data[0];
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_ndp32 {
+	__le32	dwSignature;
+	__le16	wLength;
+	__le16	wReserved6;
+	__le32	dwNextFpIndex;
+	__le32	dwReserved12;
+	__u8	data[0];
+} __attribute__ ((packed));
+
 #endif /* __LINUX_USB_CDC_H */
diff --git a/drivers/usb/core/hub.h b/include/linux/usb/ch11.h
index de8081f065e..119194c85d1 100644
--- a/drivers/usb/core/hub.h
+++ b/include/linux/usb/ch11.h
@@ -1,16 +1,15 @@
-#ifndef __LINUX_HUB_H
-#define __LINUX_HUB_H
-
 /*
- * Hub protocol and driver data structures.
+ * This file holds Hub protocol constants and data structures that are
+ * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
  *
- * Some of these are known to the "virtual root hub" code
- * in host controller drivers.
+ * It is used/shared between the USB core, the HCDs and couple of other USB
+ * drivers.
  */
 
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include <linux/compiler.h>	/* likely()/unlikely() */
+#ifndef __LINUX_CH11_H
+#define __LINUX_CH11_H
+
+#include <linux/types.h>	/* __u8 etc */
 
 /*
  * Hub request types
@@ -46,11 +45,7 @@
 #define USB_PORT_FEAT_RESET		4
 #define USB_PORT_FEAT_L1		5	/* L1 suspend */
 #define USB_PORT_FEAT_POWER		8
-#define USB_PORT_FEAT_LOWSPEED		9
-/* This value was never in Table 11-17 */
-#define USB_PORT_FEAT_HIGHSPEED		10
-/* This value is also fake */
-#define USB_PORT_FEAT_SUPERSPEED	11
+#define USB_PORT_FEAT_LOWSPEED		9	/* Should never be used */
 #define USB_PORT_FEAT_C_CONNECTION	16
 #define USB_PORT_FEAT_C_ENABLE		17
 #define USB_PORT_FEAT_C_SUSPEND		18
@@ -86,6 +81,7 @@ struct usb_port_status {
 #define USB_PORT_STAT_TEST              0x0800
 #define USB_PORT_STAT_INDICATOR         0x1000
 /* bits 13 to 15 are reserved */
+#define USB_PORT_STAT_SUPER_SPEED	0x8000	/* Linux-internal */
 
 /*
  * wPortChange bit field
@@ -162,44 +158,10 @@ enum hub_led_mode {
 	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
 } __attribute__ ((packed));
 
-struct usb_device;
-
 /* Transaction Translator Think Times, in bits */
 #define HUB_TTTT_8_BITS		0x00
 #define HUB_TTTT_16_BITS	0x20
 #define HUB_TTTT_24_BITS	0x40
 #define HUB_TTTT_32_BITS	0x60
 
-/*
- * As of USB 2.0, full/low speed devices are segregated into trees.
- * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
- * The other type grows from high speed hubs when they connect to
- * full/low speed devices using "Transaction Translators" (TTs).
- *
- * TTs should only be known to the hub driver, and high speed bus
- * drivers (only EHCI for now).  They affect periodic scheduling and
- * sometimes control/bulk error recovery.
- */
-struct usb_tt {
-	struct usb_device	*hub;	/* upstream highspeed hub */
-	int			multi;	/* true means one TT per port */
-	unsigned		think_time;	/* think time in ns */
-
-	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
-	spinlock_t		lock;
-	struct list_head	clear_list;	/* of usb_tt_clear */
-	struct work_struct	clear_work;
-};
-
-struct usb_tt_clear {
-	struct list_head	clear_list;
-	unsigned		tt;
-	u16			devinfo;
-	struct usb_hcd		*hcd;
-	struct usb_host_endpoint	*ep;
-};
-
-extern int usb_hub_clear_tt_buffer(struct urb *urb);
-extern void usb_ep0_reinit(struct usb_device *);
-
-#endif /* __LINUX_HUB_H */
+#endif /* __LINUX_CH11_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index e58369ff816..da2ed77d3e8 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -191,6 +191,8 @@ struct usb_ctrlrequest {
 #define USB_DT_WIRE_ADAPTER		0x21
 #define USB_DT_RPIPE			0x22
 #define USB_DT_CS_RADIO_CONTROL		0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE		0x24
 /* From the USB 3.0 spec */
 #define	USB_DT_SS_ENDPOINT_COMP		0x30
 
@@ -475,7 +477,7 @@ static inline int usb_endpoint_xfer_isoc(
 static inline int usb_endpoint_is_bulk_in(
 				const struct usb_endpoint_descriptor *epd)
 {
-	return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
 }
 
 /**
@@ -488,7 +490,7 @@ static inline int usb_endpoint_is_bulk_in(
 static inline int usb_endpoint_is_bulk_out(
 				const struct usb_endpoint_descriptor *epd)
 {
-	return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
+	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
 }
 
 /**
@@ -501,7 +503,7 @@ static inline int usb_endpoint_is_bulk_out(
 static inline int usb_endpoint_is_int_in(
 				const struct usb_endpoint_descriptor *epd)
 {
-	return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
 }
 
 /**
@@ -514,7 +516,7 @@ static inline int usb_endpoint_is_int_in(
 static inline int usb_endpoint_is_int_out(
 				const struct usb_endpoint_descriptor *epd)
 {
-	return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
+	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
 }
 
 /**
@@ -527,7 +529,7 @@ static inline int usb_endpoint_is_int_out(
 static inline int usb_endpoint_is_isoc_in(
 				const struct usb_endpoint_descriptor *epd)
 {
-	return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
 }
 
 /**
@@ -540,7 +542,7 @@ static inline int usb_endpoint_is_isoc_in(
 static inline int usb_endpoint_is_isoc_out(
 				const struct usb_endpoint_descriptor *epd)
 {
-	return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
+	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -556,6 +558,8 @@ struct usb_ss_ep_comp_descriptor {
 } __attribute__ ((packed));
 
 #define USB_DT_SS_EP_COMP_SIZE		6
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+#define USB_SS_MAX_STREAMS(p)		(1 << (p & 0x1f))
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 738ea1a691c..139353efad3 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -326,6 +326,7 @@ struct usb_composite_dev {
 
 	/* private: */
 	/* internals */
+	unsigned int			suspended:1;
 	struct usb_device_descriptor	desc;
 	struct list_head		configs;
 	struct usb_composite_driver	*driver;
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index af4b86f3aca..80287af2a73 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -45,7 +45,7 @@ struct ehci_caps {
 #define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
 #define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-	u8		portroute [8];	 /* nibbles for routing - offset 0xC */
+	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
 } __attribute__ ((packed));
 
 
@@ -92,14 +92,14 @@ struct ehci_regs {
 	/* ASYNCLISTADDR: offset 0x18 */
 	u32		async_next;	/* address of next async queue head */
 
-	u32		reserved [9];
+	u32		reserved[9];
 
 	/* CONFIGFLAG: offset 0x40 */
 	u32		configured_flag;
 #define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
 
 	/* PORTSC: offset 0x44 */
-	u32		port_status [0];	/* up to N_PORTS */
+	u32		port_status[0];	/* up to N_PORTS */
 /* 31:23 reserved */
 #define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
 #define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
new file mode 100644
index 00000000000..a34a2a043b2
--- /dev/null
+++ b/include/linux/usb/functionfs.h
@@ -0,0 +1,199 @@
+#ifndef __LINUX_FUNCTIONFS_H__
+#define __LINUX_FUNCTIONFS_H__ 1
+
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+
+enum {
+	FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
+	FUNCTIONFS_STRINGS_MAGIC     = 2
+};
+
+
+#ifndef __KERNEL__
+
+/* Descriptor of an non-audio endpoint */
+struct usb_endpoint_descriptor_no_audio {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEndpointAddress;
+	__u8  bmAttributes;
+	__le16 wMaxPacketSize;
+	__u8  bInterval;
+} __attribute__((packed));
+
+
+/*
+ * All numbers must be in little endian order.
+ */
+
+struct usb_functionfs_descs_head {
+	__le32 magic;
+	__le32 length;
+	__le32 fs_count;
+	__le32 hs_count;
+} __attribute__((packed));
+
+/*
+ * Descriptors format:
+ *
+ * | off | name      | type         | description                          |
+ * |-----+-----------+--------------+--------------------------------------|
+ * |   0 | magic     | LE32         | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
+ * |   4 | lenght    | LE32         | length of the whole data chunk       |
+ * |   8 | fs_count  | LE32         | number of full-speed descriptors     |
+ * |  12 | hs_count  | LE32         | number of high-speed descriptors     |
+ * |  16 | fs_descrs | Descriptor[] | list of full-speed descriptors       |
+ * |     | hs_descrs | Descriptor[] | list of high-speed descriptors       |
+ *
+ * descs are just valid USB descriptors and have the following format:
+ *
+ * | off | name            | type | description              |
+ * |-----+-----------------+------+--------------------------|
+ * |   0 | bLength         | U8   | length of the descriptor |
+ * |   1 | bDescriptorType | U8   | descriptor type          |
+ * |   2 | payload         |      | descriptor's payload     |
+ */
+
+struct usb_functionfs_strings_head {
+	__le32 magic;
+	__le32 length;
+	__le32 str_count;
+	__le32 lang_count;
+} __attribute__((packed));
+
+/*
+ * Strings format:
+ *
+ * | off | name       | type                  | description                |
+ * |-----+------------+-----------------------+----------------------------|
+ * |   0 | magic      | LE32                  | FUNCTIONFS_STRINGS_MAGIC   |
+ * |   4 | length     | LE32                  | length of the data chunk   |
+ * |   8 | str_count  | LE32                  | number of strings          |
+ * |  12 | lang_count | LE32                  | number of languages        |
+ * |  16 | stringtab  | StringTab[lang_count] | table of strings per lang  |
+ *
+ * For each language there is one stringtab entry (ie. there are lang_count
+ * stringtab entires).  Each StringTab has following format:
+ *
+ * | off | name    | type              | description                        |
+ * |-----+---------+-------------------+------------------------------------|
+ * |   0 | lang    | LE16              | language code                      |
+ * |   2 | strings | String[str_count] | array of strings in given language |
+ *
+ * For each string ther is one strings entry (ie. there are str_count
+ * string entries).  Each String is a NUL terminated string encoded in
+ * UTF-8.
+ */
+
+#endif
+
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors.  Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_functionfs_event_type {
+	FUNCTIONFS_BIND,
+	FUNCTIONFS_UNBIND,
+
+	FUNCTIONFS_ENABLE,
+	FUNCTIONFS_DISABLE,
+
+	FUNCTIONFS_SETUP,
+
+	FUNCTIONFS_SUSPEND,
+	FUNCTIONFS_RESUME
+};
+
+/* NOTE:  this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_functionfs_event {
+	union {
+		/* SETUP: packet; DATA phase i/o precedes next event
+		 *(setup.bmRequestType & USB_DIR_IN) flags direction */
+		struct usb_ctrlrequest	setup;
+	} __attribute__((packed)) u;
+
+	/* enum usb_functionfs_event_type */
+	__u8				type;
+	__u8				_pad[3];
+} __attribute__((packed));
+
+
+/* Endpoint ioctls */
+/* The same as in gadgetfs */
+
+/* IN transfers may be reported to the gadget driver as complete
+ *	when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ *	complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define	FUNCTIONFS_FIFO_STATUS	_IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define	FUNCTIONFS_FIFO_FLUSH	_IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define	FUNCTIONFS_CLEAR_HALT	_IO('g', 3)
+
+/* Specific for functionfs */
+
+/*
+ * Returns reverse mapping of an interface.  Called on EP0.  If there
+ * is no such interface returns -EDOM.  If function is not active
+ * returns -ENODEV.
+ */
+#define	FUNCTIONFS_INTERFACE_REVMAP	_IO('g', 128)
+
+/*
+ * Returns real bEndpointAddress of an endpoint.  If function is not
+ * active returns -ENODEV.
+ */
+#define	FUNCTIONFS_ENDPOINT_REVMAP	_IO('g', 129)
+
+
+#ifdef __KERNEL__
+
+struct ffs_data;
+struct usb_composite_dev;
+struct usb_configuration;
+
+
+static int  functionfs_init(void) __attribute__((warn_unused_result));
+static void functionfs_cleanup(void);
+
+static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
+	__attribute__((warn_unused_result, nonnull));
+static void functionfs_unbind(struct ffs_data *ffs)
+	__attribute__((nonnull));
+
+static int functionfs_add(struct usb_composite_dev *cdev,
+			  struct usb_configuration *c,
+			  struct ffs_data *ffs)
+	__attribute__((warn_unused_result, nonnull));
+
+
+static int functionfs_ready_callback(struct ffs_data *ffs)
+	__attribute__((warn_unused_result, nonnull));
+static void functionfs_closed_callback(struct ffs_data *ffs)
+	__attribute__((nonnull));
+static int functionfs_check_dev_callback(const char *dev_name)
+	__attribute__((warn_unused_result, nonnull));
+
+
+#endif
+
+#endif
diff --git a/include/linux/usb/g_hid.h b/include/linux/usb/g_hid.h
new file mode 100644
index 00000000000..50f5745df28
--- /dev/null
+++ b/include/linux/usb/g_hid.h
@@ -0,0 +1,32 @@
+/*
+ * g_hid.h -- Header file for USB HID gadget driver
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_USB_G_HID_H
+#define __LINUX_USB_G_HID_H
+
+struct hidg_func_descriptor {
+	unsigned char		subclass;
+	unsigned char		protocol;
+	unsigned short		report_length;
+	unsigned short		report_desc_length;
+	unsigned char		report_desc[];
+};
+
+#endif /* __LINUX_USB_G_HID_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index f4b7ca516cd..d3ef42d7d2f 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -494,9 +494,13 @@ static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
 	{ dev_set_drvdata(&gadget->dev, data); }
 static inline void *get_gadget_data(struct usb_gadget *gadget)
 	{ return dev_get_drvdata(&gadget->dev); }
+static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
+{
+	return container_of(dev, struct usb_gadget, dev);
+}
 
 /* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
-#define gadget_for_each_ep(tmp,gadget) \
+#define gadget_for_each_ep(tmp, gadget) \
 	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
 
 
diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
index 612102e4d75..0bb12e0d4f8 100644
--- a/include/linux/usb/gadgetfs.h
+++ b/include/linux/usb/gadgetfs.h
@@ -19,7 +19,7 @@
 #define __LINUX_USB_GADGETFS_H
 
 #include <linux/types.h>
-#include <asm/ioctl.h>
+#include <linux/ioctl.h>
 
 #include <linux/usb/ch9.h>
 
diff --git a/drivers/usb/core/hcd.h b/include/linux/usb/hcd.h
index a3cdb09734a..2e3a4ea1a3d 100644
--- a/drivers/usb/core/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -126,7 +126,7 @@ struct usb_hcd {
 
 
 #define HCD_BUFFER_POOLS	4
-	struct dma_pool		*pool [HCD_BUFFER_POOLS];
+	struct dma_pool		*pool[HCD_BUFFER_POOLS];
 
 	int			state;
 #	define	__ACTIVE		0x01
@@ -219,12 +219,12 @@ struct hc_driver {
 				struct urb *urb, int status);
 
 	/* hw synch, freeing endpoint resources that urb_dequeue can't */
-	void 	(*endpoint_disable)(struct usb_hcd *hcd,
+	void	(*endpoint_disable)(struct usb_hcd *hcd,
 			struct usb_host_endpoint *ep);
 
 	/* (optional) reset any endpoint state such as sequence number
 	   and current window */
-	void 	(*endpoint_reset)(struct usb_hcd *hcd,
+	void	(*endpoint_reset)(struct usb_hcd *hcd,
 			struct usb_host_endpoint *ep);
 
 	/* root hub support */
@@ -250,21 +250,33 @@ struct hc_driver {
 	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
 		/* Called by usb_disconnect to free HC device structures */
 	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
+	/* Change a group of bulk endpoints to support multiple stream IDs */
+	int	(*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags);
+	/* Reverts a group of bulk endpoints back to not using stream IDs.
+	 * Can fail if we run out of memory.
+	 */
+	int	(*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags);
 
 	/* Bandwidth computation functions */
 	/* Note that add_endpoint() can only be called once per endpoint before
 	 * check_bandwidth() or reset_bandwidth() must be called.
 	 * drop_endpoint() can only be called once per endpoint also.
-	 * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
-	 * add the endpoint to the schedule with possibly new parameters denoted by a
-	 * different endpoint descriptor in usb_host_endpoint.
-	 * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
-	 * not allowed.
+	 * A call to xhci_drop_endpoint() followed by a call to
+	 * xhci_add_endpoint() will add the endpoint to the schedule with
+	 * possibly new parameters denoted by a different endpoint descriptor
+	 * in usb_host_endpoint.  A call to xhci_add_endpoint() followed by a
+	 * call to xhci_drop_endpoint() is not allowed.
 	 */
 		/* Allocate endpoint resources and add them to a new schedule */
-	int 	(*add_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+	int	(*add_endpoint)(struct usb_hcd *, struct usb_device *,
+				struct usb_host_endpoint *);
 		/* Drop an endpoint from a new schedule */
-	int 	(*drop_endpoint)(struct usb_hcd *, struct usb_device *, struct usb_host_endpoint *);
+	int	(*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+				 struct usb_host_endpoint *);
 		/* Check that a new hardware configuration, set using
 		 * endpoint_enable and endpoint_disable, does not exceed bus
 		 * bandwidth.  This must be called before any set configuration
@@ -374,7 +386,42 @@ extern void usb_destroy_configuration(struct usb_device *dev);
  * HCD Root Hub support
  */
 
-#include "hub.h"
+#include <linux/usb/ch11.h>
+
+/*
+ * As of USB 2.0, full/low speed devices are segregated into trees.
+ * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
+ * The other type grows from high speed hubs when they connect to
+ * full/low speed devices using "Transaction Translators" (TTs).
+ *
+ * TTs should only be known to the hub driver, and high speed bus
+ * drivers (only EHCI for now).  They affect periodic scheduling and
+ * sometimes control/bulk error recovery.
+ */
+
+struct usb_device;
+
+struct usb_tt {
+	struct usb_device	*hub;	/* upstream highspeed hub */
+	int			multi;	/* true means one TT per port */
+	unsigned		think_time;	/* think time in ns */
+
+	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
+	spinlock_t		lock;
+	struct list_head	clear_list;	/* of usb_tt_clear */
+	struct work_struct	clear_work;
+};
+
+struct usb_tt_clear {
+	struct list_head	clear_list;
+	unsigned		tt;
+	u16			devinfo;
+	struct usb_hcd		*hcd;
+	struct usb_host_endpoint	*ep;
+};
+
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern void usb_ep0_reinit(struct usb_device *);
 
 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
 #define DeviceRequest \
@@ -439,8 +486,8 @@ extern void usb_destroy_configuration(struct usb_device *dev);
 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
 	+ (2083UL * (3 + BitTime(bytes))))/1000 \
 	+ USB2_HOST_DELAY)
-#define HS_USECS(bytes) NS_TO_US (HS_NSECS(bytes))
-#define HS_USECS_ISO(bytes) NS_TO_US (HS_NSECS_ISO(bytes))
+#define HS_USECS(bytes)		NS_TO_US(HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes)	NS_TO_US(HS_NSECS_ISO(bytes))
 
 extern long usb_calc_bus_time(int speed, int is_input,
 			int isoc, int bytecount);
@@ -551,7 +598,7 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
 
 /* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
 /* bleech -- resurfaced in 2.4.11 or 2.4.12 */
-#define bitmap 	DeviceRemovable
+#define bitmap	DeviceRemovable
 
 
 /*-------------------------------------------------------------------------*/
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
index c949178a653..2d2d1bbad9d 100644
--- a/include/linux/usb/langwell_udc.h
+++ b/include/linux/usb/langwell_udc.h
@@ -181,7 +181,7 @@ struct langwell_op_regs {
 #define	PORTS_PIC	(BIT(15) | BIT(14))	/* port indicator control */
 #define	PORTS_PO	BIT(13)	/* port owner */
 #define	PORTS_PP	BIT(12)	/* port power */
-#define	PORTS_LS	(BIT(11) | BIT(10)) 	/* line status */
+#define	PORTS_LS	(BIT(11) | BIT(10))	/* line status */
 #define	PORTS_SLP	BIT(9)	/* suspend using L1 */
 #define	PORTS_PR	BIT(8)	/* port reset */
 #define	PORTS_SUSP	BIT(7)	/* suspend */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 7acef0234c0..ee2dd1d506e 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -22,12 +22,47 @@ enum musb_mode {
 
 struct clk;
 
+enum musb_fifo_style {
+	FIFO_RXTX,
+	FIFO_TX,
+	FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+	BUF_SINGLE,
+	BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+	u8			hw_ep_num;
+	enum musb_fifo_style	style;
+	enum musb_buf_mode	mode;
+	u16			maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt)		\
+{						\
+	.hw_ep_num	= ep,			\
+	.style		= st,			\
+	.mode		= m,			\
+	.maxpacket	= pkt,			\
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
 struct musb_hdrc_eps_bits {
 	const char	name[16];
 	u8		bits;
 };
 
 struct musb_hdrc_config {
+	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
+	unsigned		fifo_cfg_size;	/* size of the fifo configuration */
+
 	/* MUSB configuration-specific details */
 	unsigned	multipoint:1;	/* multipoint device */
 	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
@@ -51,8 +86,9 @@ struct musb_hdrc_config {
 
 	struct musb_hdrc_eps_bits *eps_bits __deprecated;
 #ifdef CONFIG_BLACKFIN
-        /* A GPIO controlling VRSEL in Blackfin */
-        unsigned int    gpio_vrsel;
+	/* A GPIO controlling VRSEL in Blackfin */
+	unsigned int	gpio_vrsel;
+	unsigned int	gpio_vrsel_active;
 #endif
 
 };
diff --git a/include/linux/usb/ncm.h b/include/linux/usb/ncm.h
new file mode 100644
index 00000000000..006d1064c8b
--- /dev/null
+++ b/include/linux/usb/ncm.h
@@ -0,0 +1,114 @@
+/*
+ * USB CDC NCM auxiliary definitions
+ */
+
+#ifndef __LINUX_USB_NCM_H
+#define __LINUX_USB_NCM_H
+
+#include <linux/types.h>
+#include <linux/usb/cdc.h>
+#include <asm/unaligned.h>
+
+#define NCM_NTB_MIN_IN_SIZE		2048
+#define NCM_NTB_MIN_OUT_SIZE		2048
+
+#define NCM_CONTROL_TIMEOUT		(5 * 1000)
+
+/* bmNetworkCapabilities */
+
+#define NCM_NCAP_ETH_FILTER	(1 << 0)
+#define NCM_NCAP_NET_ADDRESS	(1 << 1)
+#define NCM_NCAP_ENCAP_COMM	(1 << 2)
+#define NCM_NCAP_MAX_DGRAM	(1 << 3)
+#define NCM_NCAP_CRC_MODE	(1 << 4)
+
+/*
+ * Here are options for NCM Datagram Pointer table (NDP) parser.
+ * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3),
+ * in NDP16 offsets and sizes fields are 1 16bit word wide,
+ * in NDP32 -- 2 16bit words wide. Also signatures are different.
+ * To make the parser code the same, put the differences in the structure,
+ * and switch pointers to the structures when the format is changed.
+ */
+
+struct ndp_parser_opts {
+	u32		nth_sign;
+	u32		ndp_sign;
+	unsigned	nth_size;
+	unsigned	ndp_size;
+	unsigned	ndplen_align;
+	/* sizes in u16 units */
+	unsigned	dgram_item_len; /* index or length */
+	unsigned	block_length;
+	unsigned	fp_index;
+	unsigned	reserved1;
+	unsigned	reserved2;
+	unsigned	next_fp_index;
+};
+
+#define INIT_NDP16_OPTS {					\
+		.nth_sign = NCM_NTH16_SIGN,			\
+		.ndp_sign = NCM_NDP16_NOCRC_SIGN,		\
+		.nth_size = sizeof(struct usb_cdc_ncm_nth16),	\
+		.ndp_size = sizeof(struct usb_cdc_ncm_ndp16),	\
+		.ndplen_align = 4,				\
+		.dgram_item_len = 1,				\
+		.block_length = 1,				\
+		.fp_index = 1,					\
+		.reserved1 = 0,					\
+		.reserved2 = 0,					\
+		.next_fp_index = 1,				\
+	}
+
+
+#define INIT_NDP32_OPTS {					\
+		.nth_sign = NCM_NTH32_SIGN,			\
+		.ndp_sign = NCM_NDP32_NOCRC_SIGN,		\
+		.nth_size = sizeof(struct usb_cdc_ncm_nth32),	\
+		.ndp_size = sizeof(struct usb_cdc_ncm_ndp32),	\
+		.ndplen_align = 8,				\
+		.dgram_item_len = 2,				\
+		.block_length = 2,				\
+		.fp_index = 2,					\
+		.reserved1 = 1,					\
+		.reserved2 = 2,					\
+		.next_fp_index = 2,				\
+	}
+
+static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
+{
+	switch (size) {
+	case 1:
+		put_unaligned_le16((u16)val, *p);
+		break;
+	case 2:
+		put_unaligned_le32((u32)val, *p);
+
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+}
+
+static inline unsigned get_ncm(__le16 **p, unsigned size)
+{
+	unsigned tmp;
+
+	switch (size) {
+	case 1:
+		tmp = get_unaligned_le16(*p);
+		break;
+	case 2:
+		tmp = get_unaligned_le32(*p);
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+	return tmp;
+}
+
+#endif /* __LINUX_USB_NCM_H */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
index 96ca549a778..148b8fa5b1a 100644
--- a/include/linux/usb/net2280.h
+++ b/include/linux/usb/net2280.h
@@ -353,7 +353,7 @@ struct net2280_dma_regs {	/* [11.7] */
 #define     DMA_TRANSACTION_DONE_INTERRUPT                      24
 #define     DMA_ABORT                                           1
 #define     DMA_START                                           0
-	u32		_unused0 [2];
+	u32		_unused0[2];
 	/* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
 	u32		dmacount;
 #define     VALID_BIT                                           31
@@ -374,7 +374,7 @@ struct net2280_dep_regs {	/* [11.8] */
 	u32		dep_cfg;
 	/* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
 	u32		dep_rsp;
-	u32		_unused [2];
+	u32		_unused[2];
 } __attribute__ ((packed));
 
 /* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
@@ -437,7 +437,7 @@ struct net2280_ep_regs {	/* [11.9] */
 	/* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
 	u32		ep_avail;
 	u32		ep_data;
-	u32		_unused0 [2];
+	u32		_unused0[2];
 } __attribute__ ((packed));
 
 #endif /* __LINUX_USB_NET2280_H */
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 0a555dd131f..16b7f334754 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -22,4 +22,8 @@
 /*device will morph if reset, don't use reset for handling errors */
 #define USB_QUIRK_RESET_MORPHS		0x00000010
 
+/* device has more interface descriptions than the bNumInterfaces count,
+   and can't handle talking to these interfaces */
+#define USB_QUIRK_HONOR_BNUMINTERFACES	0x00000020
+
 #endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index 1ef1ebc2b04..05ef5286198 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -34,10 +34,10 @@
 struct rndis_msg_hdr {
 	__le32	msg_type;			/* RNDIS_MSG_* */
 	__le32	msg_len;
-	// followed by data that varies between messages
+	/* followed by data that varies between messages */
 	__le32	request_id;
 	__le32	status;
-	// ... and more
+	/* ... and more */
 } __attribute__ ((packed));
 
 /* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
@@ -92,67 +92,67 @@ struct rndis_msg_hdr {
 
 struct rndis_data_hdr {
 	__le32	msg_type;		/* RNDIS_MSG_PACKET */
-	__le32	msg_len;		// rndis_data_hdr + data_len + pad
-	__le32	data_offset;		// 36 -- right after header
-	__le32	data_len;		// ... real packet size
+	__le32	msg_len;		/* rndis_data_hdr + data_len + pad */
+	__le32	data_offset;		/* 36 -- right after header */
+	__le32	data_len;		/* ... real packet size */
 
-	__le32	oob_data_offset;	// zero
-	__le32	oob_data_len;		// zero
-	__le32	num_oob;		// zero
-	__le32	packet_data_offset;	// zero
+	__le32	oob_data_offset;	/* zero */
+	__le32	oob_data_len;		/* zero */
+	__le32	num_oob;		/* zero */
+	__le32	packet_data_offset;	/* zero */
 
-	__le32	packet_data_len;	// zero
-	__le32	vc_handle;		// zero
-	__le32	reserved;		// zero
+	__le32	packet_data_len;	/* zero */
+	__le32	vc_handle;		/* zero */
+	__le32	reserved;		/* zero */
 } __attribute__ ((packed));
 
 struct rndis_init {		/* OUT */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_INIT */
-	__le32	msg_len;			// 24
+	__le32	msg_len;			/* 24 */
 	__le32	request_id;
-	__le32	major_version;			// of rndis (1.0)
+	__le32	major_version;			/* of rndis (1.0) */
 	__le32	minor_version;
 	__le32	max_transfer_size;
 } __attribute__ ((packed));
 
 struct rndis_init_c {		/* IN */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_INIT_C */
 	__le32	msg_len;
 	__le32	request_id;
 	__le32	status;
-	__le32	major_version;			// of rndis (1.0)
+	__le32	major_version;			/* of rndis (1.0) */
 	__le32	minor_version;
 	__le32	device_flags;
-	__le32	medium;				// zero == 802.3
+	__le32	medium;				/* zero == 802.3 */
 	__le32	max_packets_per_message;
 	__le32	max_transfer_size;
-	__le32	packet_alignment;		// max 7; (1<<n) bytes
-	__le32	af_list_offset;			// zero
-	__le32	af_list_size;			// zero
+	__le32	packet_alignment;		/* max 7; (1<<n) bytes */
+	__le32	af_list_offset;			/* zero */
+	__le32	af_list_size;			/* zero */
 } __attribute__ ((packed));
 
 struct rndis_halt {		/* OUT (no reply) */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_HALT */
 	__le32	msg_len;
 	__le32	request_id;
 } __attribute__ ((packed));
 
 struct rndis_query {		/* OUT */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_QUERY */
 	__le32	msg_len;
 	__le32	request_id;
 	__le32	oid;
 	__le32	len;
 	__le32	offset;
-/*?*/	__le32	handle;				// zero
+/*?*/	__le32	handle;				/* zero */
 } __attribute__ ((packed));
 
 struct rndis_query_c {		/* IN */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_QUERY_C */
 	__le32	msg_len;
 	__le32	request_id;
@@ -162,18 +162,18 @@ struct rndis_query_c {		/* IN */
 } __attribute__ ((packed));
 
 struct rndis_set {		/* OUT */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_SET */
 	__le32	msg_len;
 	__le32	request_id;
 	__le32	oid;
 	__le32	len;
 	__le32	offset;
-/*?*/	__le32	handle;				// zero
+/*?*/	__le32	handle;				/* zero */
 } __attribute__ ((packed));
 
 struct rndis_set_c {		/* IN */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_SET_C */
 	__le32	msg_len;
 	__le32	request_id;
@@ -181,14 +181,14 @@ struct rndis_set_c {		/* IN */
 } __attribute__ ((packed));
 
 struct rndis_reset {		/* IN */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_RESET */
 	__le32	msg_len;
 	__le32	reserved;
 } __attribute__ ((packed));
 
 struct rndis_reset_c {		/* OUT */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_RESET_C */
 	__le32	msg_len;
 	__le32	status;
@@ -196,7 +196,7 @@ struct rndis_reset_c {		/* OUT */
 } __attribute__ ((packed));
 
 struct rndis_indicate {		/* IN (unrequested) */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_INDICATE */
 	__le32	msg_len;
 	__le32	status;
@@ -208,14 +208,14 @@ struct rndis_indicate {		/* IN (unrequested) */
 } __attribute__ ((packed));
 
 struct rndis_keepalive {	/* OUT (optionally IN) */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE */
 	__le32	msg_len;
 	__le32	request_id;
 } __attribute__ ((packed));
 
 struct rndis_keepalive_c {	/* IN (optionally OUT) */
-	// header and:
+	/* header and: */
 	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE_C */
 	__le32	msg_len;
 	__le32	request_id;
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 0a458b86193..84a4c44c208 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -35,6 +35,9 @@ enum port_dev_state {
 	PORT_UNREGISTERING,
 };
 
+/* USB serial flags */
+#define USB_SERIAL_WRITE_BUSY	0
+
 /**
  * usb_serial_port: structure for the specific ports of a device.
  * @serial: pointer back to the struct usb_serial owner of this port.
@@ -49,7 +52,7 @@ enum port_dev_state {
  * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
  * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
  * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
- * 	for this port.
+ *	for this port.
  * @bulk_in_buffer: pointer to the bulk in buffer for this port.
  * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
  * @read_urb: pointer to the bulk in struct urb for this port.
@@ -60,13 +63,17 @@ enum port_dev_state {
  * @write_urb: pointer to the bulk out struct urb for this port.
  * @write_fifo: kfifo used to buffer outgoing data
  * @write_urb_busy: port`s writing status
+ * @bulk_out_buffers: pointers to the bulk out buffers for this port
+ * @write_urbs: pointers to the bulk out urbs for this port
+ * @write_urbs_free: status bitmap the for bulk out urbs
+ * @tx_bytes: number of bytes currently in host stack queues
  * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
  *	port.
+ * @flags: usb serial port flags
  * @write_wait: a wait_queue_head_t used by the port.
  * @work: work queue entry for the line discipline waking up.
  * @throttled: nonzero if the read urb is inactive to throttle the device
  * @throttle_req: nonzero if the tty wants to throttle us
- * @console: attached usb serial console
  * @dev: pointer to the serial device
  *
  * This structure is used by the usb-serial core and drivers for the specific
@@ -97,16 +104,19 @@ struct usb_serial_port {
 	struct urb		*write_urb;
 	struct kfifo		write_fifo;
 	int			write_urb_busy;
+
+	unsigned char		*bulk_out_buffers[2];
+	struct urb		*write_urbs[2];
+	unsigned long		write_urbs_free;
 	__u8			bulk_out_endpointAddress;
 
-	int			tx_bytes_flight;
-	int			urbs_in_flight;
+	int			tx_bytes;
 
+	unsigned long		flags;
 	wait_queue_head_t	write_wait;
 	struct work_struct	work;
 	char			throttled;
 	char			throttle_req;
-	char			console;
 	unsigned long		sysrq; /* sysrq timeout */
 	struct device		dev;
 	enum port_dev_state	dev_state;
@@ -181,6 +191,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
  * @num_ports: the number of different ports this device will have.
+ * @bulk_in_size: bytes to allocate for bulk-in buffer (0 = end-point size)
+ * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
  * @calc_num_ports: pointer to a function to determine how many ports this
  *	device has dynamically.  It will be called after the probe()
  *	callback is called, but before attach()
@@ -223,7 +235,9 @@ struct usb_serial_driver {
 	struct device_driver	driver;
 	struct usb_driver	*usb_driver;
 	struct usb_dynids	dynids;
-	int			max_in_flight_urbs;
+
+	size_t			bulk_in_size;
+	size_t			bulk_out_size;
 
 	int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
 	int (*attach)(struct usb_serial *serial);
@@ -269,6 +283,11 @@ struct usb_serial_driver {
 	void (*write_int_callback)(struct urb *urb);
 	void (*read_bulk_callback)(struct urb *urb);
 	void (*write_bulk_callback)(struct urb *urb);
+	/* Called by the generic read bulk callback */
+	void (*process_read_urb)(struct urb *urb);
+	/* Called by the generic write implementation */
+	int (*prepare_write_buffer)(struct usb_serial_port *port,
+						void *dest, size_t size);
 };
 #define to_usb_serial_driver(d) \
 	container_of(d, struct usb_serial_driver, driver)
@@ -318,8 +337,11 @@ extern void usb_serial_generic_disconnect(struct usb_serial *serial);
 extern void usb_serial_generic_release(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);
-extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port,
+extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
 						 gfp_t mem_flags);
+extern void usb_serial_generic_process_read_urb(struct urb *urb);
+extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
 extern int usb_serial_handle_sysrq_char(struct tty_struct *tty,
 					struct usb_serial_port *port,
 					unsigned int ch);
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 20675c6ebc4..2369d07c3c8 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -1,6 +1,146 @@
+/*
+ * ulpi.h -- ULPI defines and function prorotypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
 #ifndef __LINUX_USB_ULPI_H
 #define __LINUX_USB_ULPI_H
 
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Macros for Set and Clear
+ * See ULPI 1.1 specification to find the registers with Set and Clear offsets
+ */
+#define ULPI_SET(a)				(a + 1)
+#define ULPI_CLR(a)				(a + 2)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Register Map
+ */
+#define ULPI_VENDOR_ID_LOW			0x00
+#define ULPI_VENDOR_ID_HIGH			0x01
+#define ULPI_PRODUCT_ID_LOW			0x02
+#define ULPI_PRODUCT_ID_HIGH			0x03
+#define ULPI_FUNC_CTRL				0x04
+#define ULPI_IFC_CTRL				0x07
+#define ULPI_OTG_CTRL				0x0a
+#define ULPI_USB_INT_EN_RISE			0x0d
+#define ULPI_USB_INT_EN_FALL			0x10
+#define ULPI_USB_INT_STS			0x13
+#define ULPI_USB_INT_LATCH			0x14
+#define ULPI_DEBUG				0x15
+#define ULPI_SCRATCH				0x16
+/* Optional Carkit Registers */
+#define ULPI_CARCIT_CTRL			0x19
+#define ULPI_CARCIT_INT_DELAY			0x1c
+#define ULPI_CARCIT_INT_EN			0x1d
+#define ULPI_CARCIT_INT_STS			0x20
+#define ULPI_CARCIT_INT_LATCH			0x21
+#define ULPI_CARCIT_PLS_CTRL			0x22
+/* Other Optional Registers */
+#define ULPI_TX_POS_WIDTH			0x25
+#define ULPI_TX_NEG_WIDTH			0x26
+#define ULPI_POLARITY_RECOVERY			0x27
+/* Access Extended Register Set */
+#define ULPI_ACCESS_EXTENDED			0x2f
+/* Vendor Specific */
+#define ULPI_VENDOR_SPECIFIC			0x30
+/* Extended Registers */
+#define ULPI_EXT_VENDOR_SPECIFIC		0x80
+
+/*-------------------------------------------------------------------------*/
+
+/* Function Control */
+#define ULPI_FUNC_CTRL_XCVRSEL			(1 << 0)
+#define  ULPI_FUNC_CTRL_XCVRSEL_MASK		(3 << 0)
+#define  ULPI_FUNC_CTRL_HIGH_SPEED		(0 << 0)
+#define  ULPI_FUNC_CTRL_FULL_SPEED		(1 << 0)
+#define  ULPI_FUNC_CTRL_LOW_SPEED		(2 << 0)
+#define  ULPI_FUNC_CTRL_FS4LS			(3 << 0)
+#define ULPI_FUNC_CTRL_TERMSELECT		(1 << 2)
+#define ULPI_FUNC_CTRL_OPMODE			(1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_MASK		(3 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NORMAL		(0 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING	(1 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI	(2 << 3)
+#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP	(3 << 3)
+#define ULPI_FUNC_CTRL_RESET			(1 << 5)
+#define ULPI_FUNC_CTRL_SUSPENDM			(1 << 6)
+
+/* Interface Control */
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE		(1 << 0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE		(1 << 1)
+#define ULPI_IFC_CTRL_CARKITMODE		(1 << 2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM		(1 << 3)
+#define ULPI_IFC_CTRL_AUTORESUME		(1 << 4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS		(1 << 5)
+#define ULPI_IFC_CTRL_PASSTHRU			(1 << 6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE	(1 << 7)
+
+/* OTG Control */
+#define ULPI_OTG_CTRL_ID_PULLUP			(1 << 0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN		(1 << 1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN		(1 << 2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS		(1 << 3)
+#define ULPI_OTG_CTRL_CHRGVBUS			(1 << 4)
+#define ULPI_OTG_CTRL_DRVVBUS			(1 << 5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT		(1 << 6)
+#define ULPI_OTG_CTRL_EXTVBUSIND		(1 << 7)
+
+/* USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT		(1 << 0)
+#define ULPI_INT_VBUS_VALID			(1 << 1)
+#define ULPI_INT_SESS_VALID			(1 << 2)
+#define ULPI_INT_SESS_END			(1 << 3)
+#define ULPI_INT_IDGRD				(1 << 4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0			(1 << 0)
+#define ULPI_DEBUG_LINESTATE1			(1 << 1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR		(1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV		(1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN			(1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN			(1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN		(1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN			(1 << 6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		(1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		(1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET		(1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE		(1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL		(1 << 4)
+
+/* Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT			(1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET		(1 << 1)
+#define ULPI_CARKIT_INT_DP			(1 << 2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
+
+/*-------------------------------------------------------------------------*/
+
 struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
 					unsigned int flags);
 
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index df1e83dd9a5..7ae27a47381 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -43,7 +43,7 @@ struct usbnet {
 	/* protocol/interface state */
 	struct net_device	*net;
 	int			msg_enable;
-	unsigned long		data [5];
+	unsigned long		data[5];
 	u32			xid;
 	u32			hard_mtu;	/* count any extra framing */
 	size_t			rx_urb_size;	/* size for rx urbs */
@@ -148,8 +148,8 @@ struct driver_info {
  * much everything except custom framing and chip-specific stuff.
  */
 extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
-extern int usbnet_suspend (struct usb_interface *, pm_message_t );
-extern int usbnet_resume (struct usb_interface *);
+extern int usbnet_suspend(struct usb_interface *, pm_message_t);
+extern int usbnet_resume(struct usb_interface *);
 extern void usbnet_disconnect(struct usb_interface *);
 
 
@@ -165,8 +165,8 @@ struct cdc_state {
 	struct usb_interface		*data;
 };
 
-extern int usbnet_generic_cdc_bind (struct usbnet *, struct usb_interface *);
-extern void usbnet_cdc_unbind (struct usbnet *, struct usb_interface *);
+extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
 
 /* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
 #define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
@@ -189,29 +189,31 @@ struct skb_data {	/* skb->cb is one of these */
 	size_t			length;
 };
 
-extern int usbnet_open (struct net_device *net);
-extern int usbnet_stop (struct net_device *net);
-extern netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
-				      struct net_device *net);
-extern void usbnet_tx_timeout (struct net_device *net);
-extern int usbnet_change_mtu (struct net_device *net, int new_mtu);
+extern int usbnet_open(struct net_device *net);
+extern int usbnet_stop(struct net_device *net);
+extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb,
+				     struct net_device *net);
+extern void usbnet_tx_timeout(struct net_device *net);
+extern int usbnet_change_mtu(struct net_device *net, int new_mtu);
 
 extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
 extern int usbnet_get_ethernet_addr(struct usbnet *, int);
-extern void usbnet_defer_kevent (struct usbnet *, int);
-extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
+extern void usbnet_defer_kevent(struct usbnet *, int);
+extern void usbnet_skb_return(struct usbnet *, struct sk_buff *);
 extern void usbnet_unlink_rx_urbs(struct usbnet *);
 
 extern void usbnet_pause_rx(struct usbnet *);
 extern void usbnet_resume_rx(struct usbnet *);
 extern void usbnet_purge_paused_rxq(struct usbnet *);
 
-extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd);
-extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd);
-extern u32 usbnet_get_link (struct net_device *net);
-extern u32 usbnet_get_msglevel (struct net_device *);
-extern void usbnet_set_msglevel (struct net_device *, u32);
-extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_get_settings(struct net_device *net,
+			       struct ethtool_cmd *cmd);
+extern int usbnet_set_settings(struct net_device *net,
+			       struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link(struct net_device *net);
+extern u32 usbnet_get_msglevel(struct net_device *);
+extern void usbnet_set_msglevel(struct net_device *, u32);
+extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
 extern int usbnet_nway_reset(struct net_device *net);
 
 #endif /* __LINUX_USB_USBNET_H */
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
index fb7c359bdfb..f9dec37f617 100644
--- a/include/linux/usb/wusb-wa.h
+++ b/include/linux/usb/wusb-wa.h
@@ -87,7 +87,7 @@ enum rpipe_crs {
  * FIXME: explain rpipes
  */
 struct usb_rpipe_descriptor {
-	u8 	bLength;
+	u8	bLength;
 	u8	bDescriptorType;
 	__le16  wRPipeIndex;
 	__le16	wRequests;
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 76d96d035ea..0836ccc5712 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -376,6 +376,155 @@ do {									\
 	__ret;								\
 })
 
+
+#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
+({									\
+	int __ret = 0;							\
+	DEFINE_WAIT(__wait);						\
+	if (exclusive)							\
+		__wait.flags |= WQ_FLAG_EXCLUSIVE;			\
+	do {								\
+		if (likely(list_empty(&__wait.task_list)))		\
+			__add_wait_queue_tail(&(wq), &__wait);		\
+		set_current_state(TASK_INTERRUPTIBLE);			\
+		if (signal_pending(current)) {				\
+			__ret = -ERESTARTSYS;				\
+			break;						\
+		}							\
+		if (irq)						\
+			spin_unlock_irq(&(wq).lock);			\
+		else							\
+			spin_unlock(&(wq).lock);			\
+		schedule();						\
+		if (irq)						\
+			spin_lock_irq(&(wq).lock);			\
+		else							\
+			spin_lock(&(wq).lock);				\
+	} while (!(condition));						\
+	__remove_wait_queue(&(wq), &__wait);				\
+	__set_current_state(TASK_RUNNING);				\
+	__ret;								\
+})
+
+
+/**
+ * wait_event_interruptible_locked - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock()/spin_unlock()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_locked(wq, condition)			\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 0))
+
+/**
+ * wait_event_interruptible_locked_irq - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_locked_irq(wq, condition)		\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 1))
+
+/**
+ * wait_event_interruptible_exclusive_locked - sleep exclusively until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock()/spin_unlock()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus when other process waits process on the list if this
+ * process is awaken further processes are not considered.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_exclusive_locked(wq, condition)	\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 0))
+
+/**
+ * wait_event_interruptible_exclusive_locked_irq - sleep until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE) until the
+ * @condition evaluates to true or a signal is received.
+ * The @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * It must be called with wq.lock being held.  This spinlock is
+ * unlocked while sleeping but @condition testing is done while lock
+ * is held and when this macro exits the lock is held.
+ *
+ * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
+ * functions which must match the way they are locked/unlocked outside
+ * of this macro.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus when other process waits process on the list if this
+ * process is awaken further processes are not considered.
+ *
+ * wake_up_locked() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * The function will return -ERESTARTSYS if it was interrupted by a
+ * signal and 0 if @condition evaluated to true.
+ */
+#define wait_event_interruptible_exclusive_locked_irq(wq, condition)	\
+	((condition)							\
+	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 1))
+
+
+
 #define __wait_event_killable(wq, condition, ret)			\
 do {									\
 	DEFINE_WAIT(__wait);						\
diff --git a/kernel/sched.c b/kernel/sched.c
index 1d93cd0ae4d..d9c0368eeb2 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3851,6 +3851,7 @@ void __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
 {
 	__wake_up_common(q, mode, 1, 0, NULL);
 }
+EXPORT_SYMBOL_GPL(__wake_up_locked);
 
 void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key)
 {
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 2c1558c327b..8b1e4b124a9 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1048,8 +1048,8 @@ static struct snd_rawmidi_ops snd_usbmidi_input_ops = {
 static void free_urb_and_buffer(struct snd_usb_midi *umidi, struct urb *urb,
 				unsigned int buffer_length)
 {
-	usb_buffer_free(umidi->dev, buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(umidi->dev, buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 	usb_free_urb(urb);
 }
 
@@ -1100,8 +1100,8 @@ static int snd_usbmidi_in_endpoint_create(struct snd_usb_midi* umidi,
 		pipe = usb_rcvbulkpipe(umidi->dev, ep_info->in_ep);
 	length = usb_maxpacket(umidi->dev, pipe, 0);
 	for (i = 0; i < INPUT_URBS; ++i) {
-		buffer = usb_buffer_alloc(umidi->dev, length, GFP_KERNEL,
-					  &ep->urbs[i]->transfer_dma);
+		buffer = usb_alloc_coherent(umidi->dev, length, GFP_KERNEL,
+					    &ep->urbs[i]->transfer_dma);
 		if (!buffer) {
 			snd_usbmidi_in_endpoint_delete(ep);
 			return -ENOMEM;
@@ -1191,9 +1191,9 @@ static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi* umidi,
 		break;
 	}
 	for (i = 0; i < OUTPUT_URBS; ++i) {
-		buffer = usb_buffer_alloc(umidi->dev,
-					  ep->max_transfer, GFP_KERNEL,
-					  &ep->urbs[i].urb->transfer_dma);
+		buffer = usb_alloc_coherent(umidi->dev,
+					    ep->max_transfer, GFP_KERNEL,
+					    &ep->urbs[i].urb->transfer_dma);
 		if (!buffer) {
 			snd_usbmidi_out_endpoint_delete(ep);
 			return -ENOMEM;
diff --git a/sound/usb/misc/ua101.c b/sound/usb/misc/ua101.c
index 796d8b25ee8..fb5d68fa7ff 100644
--- a/sound/usb/misc/ua101.c
+++ b/sound/usb/misc/ua101.c
@@ -42,7 +42,7 @@ MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
 /*
  * This magic value optimizes memory usage efficiency for the UA-101's packet
  * sizes at all sample rates, taking into account the stupid cache pool sizes
- * that usb_buffer_alloc() uses.
+ * that usb_alloc_coherent() uses.
  */
 #define DEFAULT_QUEUE_LENGTH	21
 
@@ -1057,7 +1057,7 @@ static int alloc_stream_buffers(struct ua101 *ua, struct ua101_stream *stream)
 				   (unsigned int)MAX_QUEUE_LENGTH);
 
 	/*
-	 * The cache pool sizes used by usb_buffer_alloc() (128, 512, 2048) are
+	 * The cache pool sizes used by usb_alloc_coherent() (128, 512, 2048) are
 	 * quite bad when used with the packet sizes of this device (e.g. 280,
 	 * 520, 624).  Therefore, we allocate and subdivide entire pages, using
 	 * a smaller buffer only for the last chunk.
@@ -1068,8 +1068,8 @@ static int alloc_stream_buffers(struct ua101 *ua, struct ua101_stream *stream)
 		packets = min(remaining_packets, packets_per_page);
 		size = packets * stream->max_packet_bytes;
 		stream->buffers[i].addr =
-			usb_buffer_alloc(ua->dev, size, GFP_KERNEL,
-					 &stream->buffers[i].dma);
+			usb_alloc_coherent(ua->dev, size, GFP_KERNEL,
+					   &stream->buffers[i].dma);
 		if (!stream->buffers[i].addr)
 			return -ENOMEM;
 		stream->buffers[i].size = size;
@@ -1089,10 +1089,10 @@ static void free_stream_buffers(struct ua101 *ua, struct ua101_stream *stream)
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(stream->buffers); ++i)
-		usb_buffer_free(ua->dev,
-				stream->buffers[i].size,
-				stream->buffers[i].addr,
-				stream->buffers[i].dma);
+		usb_free_coherent(ua->dev,
+				  stream->buffers[i].size,
+				  stream->buffers[i].addr,
+				  stream->buffers[i].dma);
 }
 
 static int alloc_stream_urbs(struct ua101 *ua, struct ua101_stream *stream,
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
new file mode 100644
index 00000000000..bbe2e3a2ea6
--- /dev/null
+++ b/tools/usb/ffs-test.c
@@ -0,0 +1,554 @@
+/*
+ * ffs-test.c.c -- user mode filesystem api for usb composite function
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *                    Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* $(CROSS_COMPILE)cc -Wall -Wextra -g -o ffs-test ffs-test.c -lpthread */
+
+
+#define _BSD_SOURCE /* for endian.h */
+
+#include <endian.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <pthread.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include <linux/usb/functionfs.h>
+
+
+/******************** Little Endian Handling ********************************/
+
+#define cpu_to_le16(x)  htole16(x)
+#define cpu_to_le32(x)  htole32(x)
+#define le32_to_cpu(x)  le32toh(x)
+#define le16_to_cpu(x)  le16toh(x)
+
+static inline __u16 get_unaligned_le16(const void *_ptr)
+{
+	const __u8 *ptr = _ptr;
+	return ptr[0] | (ptr[1] << 8);
+}
+
+static inline __u32 get_unaligned_le32(const void *_ptr)
+{
+	const __u8 *ptr = _ptr;
+	return ptr[0] | (ptr[1] << 8) | (ptr[2] << 16) | (ptr[3] << 24);
+}
+
+static inline void put_unaligned_le16(__u16 val, void *_ptr)
+{
+	__u8 *ptr = _ptr;
+	*ptr++ = val;
+	*ptr++ = val >> 8;
+}
+
+static inline void put_unaligned_le32(__u32 val, void *_ptr)
+{
+	__u8 *ptr = _ptr;
+	*ptr++ = val;
+	*ptr++ = val >>  8;
+	*ptr++ = val >> 16;
+	*ptr++ = val >> 24;
+}
+
+
+/******************** Messages and Errors ***********************************/
+
+static const char argv0[] = "ffs-test";
+
+static unsigned verbosity = 7;
+
+static void _msg(unsigned level, const char *fmt, ...)
+{
+	if (level < 2)
+		level = 2;
+	else if (level > 7)
+		level = 7;
+
+	if (level <= verbosity) {
+		static const char levels[8][6] = {
+			[2] = "crit:",
+			[3] = "err: ",
+			[4] = "warn:",
+			[5] = "note:",
+			[6] = "info:",
+			[7] = "dbg: "
+		};
+
+		int _errno = errno;
+		va_list ap;
+
+		fprintf(stderr, "%s: %s ", argv0, levels[level]);
+		va_start(ap, fmt);
+		vfprintf(stderr, fmt, ap);
+		va_end(ap);
+
+		if (fmt[strlen(fmt) - 1] != '\n') {
+			char buffer[128];
+			strerror_r(_errno, buffer, sizeof buffer);
+			fprintf(stderr, ": (-%d) %s\n", _errno, buffer);
+		}
+
+		fflush(stderr);
+	}
+}
+
+#define die(...)  (_msg(2, __VA_ARGS__), exit(1))
+#define err(...)   _msg(3, __VA_ARGS__)
+#define warn(...)  _msg(4, __VA_ARGS__)
+#define note(...)  _msg(5, __VA_ARGS__)
+#define info(...)  _msg(6, __VA_ARGS__)
+#define debug(...) _msg(7, __VA_ARGS__)
+
+#define die_on(cond, ...) do { \
+	if (cond) \
+		die(__VA_ARGS__); \
+	} while (0)
+
+
+/******************** Descriptors and Strings *******************************/
+
+static const struct {
+	struct usb_functionfs_descs_head header;
+	struct {
+		struct usb_interface_descriptor intf;
+		struct usb_endpoint_descriptor_no_audio sink;
+		struct usb_endpoint_descriptor_no_audio source;
+	} __attribute__((packed)) fs_descs, hs_descs;
+} __attribute__((packed)) descriptors = {
+	.header = {
+		.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC),
+		.length = cpu_to_le32(sizeof descriptors),
+		.fs_count = 3,
+		.hs_count = 3,
+	},
+	.fs_descs = {
+		.intf = {
+			.bLength = sizeof descriptors.fs_descs.intf,
+			.bDescriptorType = USB_DT_INTERFACE,
+			.bNumEndpoints = 2,
+			.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+			.iInterface = 1,
+		},
+		.sink = {
+			.bLength = sizeof descriptors.fs_descs.sink,
+			.bDescriptorType = USB_DT_ENDPOINT,
+			.bEndpointAddress = 1 | USB_DIR_IN,
+			.bmAttributes = USB_ENDPOINT_XFER_BULK,
+			/* .wMaxPacketSize = autoconfiguration (kernel) */
+		},
+		.source = {
+			.bLength = sizeof descriptors.fs_descs.source,
+			.bDescriptorType = USB_DT_ENDPOINT,
+			.bEndpointAddress = 2 | USB_DIR_OUT,
+			.bmAttributes = USB_ENDPOINT_XFER_BULK,
+			/* .wMaxPacketSize = autoconfiguration (kernel) */
+		},
+	},
+	.hs_descs = {
+		.intf = {
+			.bLength = sizeof descriptors.fs_descs.intf,
+			.bDescriptorType = USB_DT_INTERFACE,
+			.bNumEndpoints = 2,
+			.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+			.iInterface = 1,
+		},
+		.sink = {
+			.bLength = sizeof descriptors.hs_descs.sink,
+			.bDescriptorType = USB_DT_ENDPOINT,
+			.bEndpointAddress = 1 | USB_DIR_IN,
+			.bmAttributes = USB_ENDPOINT_XFER_BULK,
+			.wMaxPacketSize = cpu_to_le16(512),
+		},
+		.source = {
+			.bLength = sizeof descriptors.hs_descs.source,
+			.bDescriptorType = USB_DT_ENDPOINT,
+			.bEndpointAddress = 2 | USB_DIR_OUT,
+			.bmAttributes = USB_ENDPOINT_XFER_BULK,
+			.wMaxPacketSize = cpu_to_le16(512),
+			.bInterval = 1, /* NAK every 1 uframe */
+		},
+	},
+};
+
+
+#define STR_INTERFACE_ "Source/Sink"
+
+static const struct {
+	struct usb_functionfs_strings_head header;
+	struct {
+		__le16 code;
+		const char str1[sizeof STR_INTERFACE_];
+	} __attribute__((packed)) lang0;
+} __attribute__((packed)) strings = {
+	.header = {
+		.magic = cpu_to_le32(FUNCTIONFS_STRINGS_MAGIC),
+		.length = cpu_to_le32(sizeof strings),
+		.str_count = cpu_to_le32(1),
+		.lang_count = cpu_to_le32(1),
+	},
+	.lang0 = {
+		cpu_to_le16(0x0409), /* en-us */
+		STR_INTERFACE_,
+	},
+};
+
+#define STR_INTERFACE strings.lang0.str1
+
+
+/******************** Files and Threads Handling ****************************/
+
+struct thread;
+
+static ssize_t read_wrap(struct thread *t, void *buf, size_t nbytes);
+static ssize_t write_wrap(struct thread *t, const void *buf, size_t nbytes);
+static ssize_t ep0_consume(struct thread *t, const void *buf, size_t nbytes);
+static ssize_t fill_in_buf(struct thread *t, void *buf, size_t nbytes);
+static ssize_t empty_out_buf(struct thread *t, const void *buf, size_t nbytes);
+
+
+static struct thread {
+	const char *const filename;
+	size_t buf_size;
+
+	ssize_t (*in)(struct thread *, void *, size_t);
+	const char *const in_name;
+
+	ssize_t (*out)(struct thread *, const void *, size_t);
+	const char *const out_name;
+
+	int fd;
+	pthread_t id;
+	void *buf;
+	ssize_t status;
+} threads[] = {
+	{
+		"ep0", 4 * sizeof(struct usb_functionfs_event),
+		read_wrap, NULL,
+		ep0_consume, "<consume>",
+		0, 0, NULL, 0
+	},
+	{
+		"ep1", 8 * 1024,
+		fill_in_buf, "<in>",
+		write_wrap, NULL,
+		0, 0, NULL, 0
+	},
+	{
+		"ep2", 8 * 1024,
+		read_wrap, NULL,
+		empty_out_buf, "<out>",
+		0, 0, NULL, 0
+	},
+};
+
+
+static void init_thread(struct thread *t)
+{
+	t->buf = malloc(t->buf_size);
+	die_on(!t->buf, "malloc");
+
+	t->fd = open(t->filename, O_RDWR);
+	die_on(t->fd < 0, "%s", t->filename);
+}
+
+static void cleanup_thread(void *arg)
+{
+	struct thread *t = arg;
+	int ret, fd;
+
+	fd = t->fd;
+	if (t->fd < 0)
+		return;
+	t->fd = -1;
+
+	/* test the FIFO ioctls (non-ep0 code paths) */
+	if (t != threads) {
+		ret = ioctl(fd, FUNCTIONFS_FIFO_STATUS);
+		if (ret < 0) {
+			/* ENODEV reported after disconnect */
+			if (errno != ENODEV)
+				err("%s: get fifo status", t->filename);
+		} else if (ret) {
+			warn("%s: unclaimed = %d\n", t->filename, ret);
+			if (ioctl(fd, FUNCTIONFS_FIFO_FLUSH) < 0)
+				err("%s: fifo flush", t->filename);
+		}
+	}
+
+	if (close(fd) < 0)
+		err("%s: close", t->filename);
+
+	free(t->buf);
+	t->buf = NULL;
+}
+
+static void *start_thread_helper(void *arg)
+{
+	const char *name, *op, *in_name, *out_name;
+	struct thread *t = arg;
+	ssize_t ret;
+
+	info("%s: starts\n", t->filename);
+	in_name = t->in_name ? t->in_name : t->filename;
+	out_name = t->out_name ? t->out_name : t->filename;
+
+	pthread_cleanup_push(cleanup_thread, arg);
+
+	for (;;) {
+		pthread_testcancel();
+
+		ret = t->in(t, t->buf, t->buf_size);
+		if (ret > 0) {
+			ret = t->out(t, t->buf, t->buf_size);
+			name = out_name;
+			op = "write";
+		} else {
+			name = in_name;
+			op = "read";
+		}
+
+		if (ret > 0) {
+			/* nop */
+		} else if (!ret) {
+			debug("%s: %s: EOF", name, op);
+			break;
+		} else if (errno == EINTR || errno == EAGAIN) {
+			debug("%s: %s", name, op);
+		} else {
+			warn("%s: %s", name, op);
+			break;
+		}
+	}
+
+	pthread_cleanup_pop(1);
+
+	t->status = ret;
+	info("%s: ends\n", t->filename);
+	return NULL;
+}
+
+static void start_thread(struct thread *t)
+{
+	debug("%s: starting\n", t->filename);
+
+	die_on(pthread_create(&t->id, NULL, start_thread_helper, t) < 0,
+	       "pthread_create(%s)", t->filename);
+}
+
+static void join_thread(struct thread *t)
+{
+	int ret = pthread_join(t->id, NULL);
+
+	if (ret < 0)
+		err("%s: joining thread", t->filename);
+	else
+		debug("%s: joined\n", t->filename);
+}
+
+
+static ssize_t read_wrap(struct thread *t, void *buf, size_t nbytes)
+{
+	return read(t->fd, buf, nbytes);
+}
+
+static ssize_t write_wrap(struct thread *t, const void *buf, size_t nbytes)
+{
+	return write(t->fd, buf, nbytes);
+}
+
+
+/******************** Empty/Fill buffer routines ****************************/
+
+/* 0 -- stream of zeros, 1 -- i % 63, 2 -- pipe */
+enum pattern { PAT_ZERO, PAT_SEQ, PAT_PIPE };
+static enum pattern pattern;
+
+static ssize_t
+fill_in_buf(struct thread *ignore, void *buf, size_t nbytes)
+{
+	size_t i;
+	__u8 *p;
+
+	(void)ignore;
+
+	switch (pattern) {
+	case PAT_ZERO:
+		memset(buf, 0, nbytes);
+		break;
+
+	case PAT_SEQ:
+		for (p = buf, i = 0; i < nbytes; ++i, ++p)
+			*p = i % 63;
+		break;
+
+	case PAT_PIPE:
+		return fread(buf, 1, nbytes, stdin);
+	}
+
+	return nbytes;
+}
+
+static ssize_t
+empty_out_buf(struct thread *ignore, const void *buf, size_t nbytes)
+{
+	const __u8 *p;
+	__u8 expected;
+	ssize_t ret;
+	size_t len;
+
+	(void)ignore;
+
+	switch (pattern) {
+	case PAT_ZERO:
+		expected = 0;
+		for (p = buf, len = 0; len < nbytes; ++p, ++len)
+			if (*p)
+				goto invalid;
+		break;
+
+	case PAT_SEQ:
+		for (p = buf, len = 0; len < nbytes; ++p, ++len)
+			if (*p != len % 63) {
+				expected = len % 63;
+				goto invalid;
+			}
+		break;
+
+	case PAT_PIPE:
+		ret = fwrite(buf, nbytes, 1, stdout);
+		if (ret > 0)
+			fflush(stdout);
+		break;
+
+invalid:
+		err("bad OUT byte %zd, expected %02x got %02x\n",
+		    len, expected, *p);
+		for (p = buf, len = 0; len < nbytes; ++p, ++len) {
+			if (0 == (len % 32))
+				fprintf(stderr, "%4d:", len);
+			fprintf(stderr, " %02x", *p);
+			if (31 == (len % 32))
+				fprintf(stderr, "\n");
+		}
+		fflush(stderr);
+		errno = EILSEQ;
+		return -1;
+	}
+
+	return len;
+}
+
+
+/******************** Endpoints routines ************************************/
+
+static void handle_setup(const struct usb_ctrlrequest *setup)
+{
+	printf("bRequestType = %d\n", setup->bRequestType);
+	printf("bRequest     = %d\n", setup->bRequest);
+	printf("wValue       = %d\n", le16_to_cpu(setup->wValue));
+	printf("wIndex       = %d\n", le16_to_cpu(setup->wIndex));
+	printf("wLength      = %d\n", le16_to_cpu(setup->wLength));
+}
+
+static ssize_t
+ep0_consume(struct thread *ignore, const void *buf, size_t nbytes)
+{
+	static const char *const names[] = {
+		[FUNCTIONFS_BIND] = "BIND",
+		[FUNCTIONFS_UNBIND] = "UNBIND",
+		[FUNCTIONFS_ENABLE] = "ENABLE",
+		[FUNCTIONFS_DISABLE] = "DISABLE",
+		[FUNCTIONFS_SETUP] = "SETUP",
+		[FUNCTIONFS_SUSPEND] = "SUSPEND",
+		[FUNCTIONFS_RESUME] = "RESUME",
+	};
+
+	const struct usb_functionfs_event *event = buf;
+	size_t n;
+
+	(void)ignore;
+
+	for (n = nbytes / sizeof *event; n; --n, ++event)
+		switch (event->type) {
+		case FUNCTIONFS_BIND:
+		case FUNCTIONFS_UNBIND:
+		case FUNCTIONFS_ENABLE:
+		case FUNCTIONFS_DISABLE:
+		case FUNCTIONFS_SETUP:
+		case FUNCTIONFS_SUSPEND:
+		case FUNCTIONFS_RESUME:
+			printf("Event %s\n", names[event->type]);
+			if (event->type == FUNCTIONFS_SETUP)
+				handle_setup(&event->u.setup);
+			break;
+
+		default:
+			printf("Event %03u (unknown)\n", event->type);
+		}
+
+	return nbytes;
+}
+
+static void ep0_init(struct thread *t)
+{
+	ssize_t ret;
+
+	info("%s: writing descriptors\n", t->filename);
+	ret = write(t->fd, &descriptors, sizeof descriptors);
+	die_on(ret < 0, "%s: write: descriptors", t->filename);
+
+	info("%s: writing strings\n", t->filename);
+	ret = write(t->fd, &strings, sizeof strings);
+	die_on(ret < 0, "%s: write: strings", t->filename);
+}
+
+
+/******************** Main **************************************************/
+
+int main(void)
+{
+	unsigned i;
+
+	/* XXX TODO: Argument parsing missing */
+
+	init_thread(threads);
+	ep0_init(threads);
+
+	for (i = 1; i < sizeof threads / sizeof *threads; ++i)
+		init_thread(threads + i);
+
+	for (i = 1; i < sizeof threads / sizeof *threads; ++i)
+		start_thread(threads + i);
+
+	start_thread_helper(threads);
+
+	for (i = 1; i < sizeof threads / sizeof *threads; ++i)
+		join_thread(threads + i);
+
+	return 0;
+}
diff --git a/tools/usb/testusb.c b/tools/usb/testusb.c
new file mode 100644
index 00000000000..f08e8946384
--- /dev/null
+++ b/tools/usb/testusb.c
@@ -0,0 +1,547 @@
+/* $(CROSS_COMPILE)cc -Wall -Wextra -g -lpthread -o testusb testusb.c */
+
+/*
+ * Copyright (c) 2002 by David Brownell
+ * Copyright (c) 2010 by Samsung Electronics
+ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * This program issues ioctls to perform the tests implemented by the
+ * kernel driver.  It can generate a variety of transfer patterns; you
+ * should make sure to test both regular streaming and mixes of
+ * transfer sizes (including short transfers).
+ *
+ * For more information on how this can be used and on USB testing
+ * refer to <URL:http://www.linux-usb.org/usbtest/>.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <ftw.h>
+#include <stdlib.h>
+#include <pthread.h>
+#include <unistd.h>
+#include <errno.h>
+#include <limits.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+#include <sys/ioctl.h>
+#include <linux/usbdevice_fs.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define	TEST_CASES	30
+
+// FIXME make these public somewhere; usbdevfs.h?
+
+struct usbtest_param {
+	// inputs
+	unsigned		test_num;	/* 0..(TEST_CASES-1) */
+	unsigned		iterations;
+	unsigned		length;
+	unsigned		vary;
+	unsigned		sglen;
+
+	// outputs
+	struct timeval		duration;
+};
+#define USBTEST_REQUEST	_IOWR('U', 100, struct usbtest_param)
+
+/*-------------------------------------------------------------------------*/
+
+/* #include <linux/usb_ch9.h> */
+
+#define USB_DT_DEVICE			0x01
+#define USB_DT_INTERFACE		0x04
+
+#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
+#define USB_CLASS_VENDOR_SPEC		0xff
+
+
+struct usb_device_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u16 bcdUSB;
+	__u8  bDeviceClass;
+	__u8  bDeviceSubClass;
+	__u8  bDeviceProtocol;
+	__u8  bMaxPacketSize0;
+	__u16 idVendor;
+	__u16 idProduct;
+	__u16 bcdDevice;
+	__u8  iManufacturer;
+	__u8  iProduct;
+	__u8  iSerialNumber;
+	__u8  bNumConfigurations;
+} __attribute__ ((packed));
+
+struct usb_interface_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bInterfaceNumber;
+	__u8  bAlternateSetting;
+	__u8  bNumEndpoints;
+	__u8  bInterfaceClass;
+	__u8  bInterfaceSubClass;
+	__u8  bInterfaceProtocol;
+	__u8  iInterface;
+} __attribute__ ((packed));
+
+enum usb_device_speed {
+	USB_SPEED_UNKNOWN = 0,			/* enumerating */
+	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
+	USB_SPEED_HIGH				/* usb 2.0 */
+};
+
+/*-------------------------------------------------------------------------*/
+
+static char *speed (enum usb_device_speed s)
+{
+	switch (s) {
+	case USB_SPEED_UNKNOWN:	return "unknown";
+	case USB_SPEED_LOW:	return "low";
+	case USB_SPEED_FULL:	return "full";
+	case USB_SPEED_HIGH:	return "high";
+	default:		return "??";
+	}
+}
+
+struct testdev {
+	struct testdev		*next;
+	char			*name;
+	pthread_t		thread;
+	enum usb_device_speed	speed;
+	unsigned		ifnum : 8;
+	unsigned		forever : 1;
+	int			test;
+
+	struct usbtest_param	param;
+};
+static struct testdev		*testdevs;
+
+static int testdev_ffs_ifnum(FILE *fd)
+{
+	union {
+		char buf[255];
+		struct usb_interface_descriptor intf;
+	} u;
+
+	for (;;) {
+		if (fread(u.buf, 1, 1, fd) != 1)
+			return -1;
+		if (fread(u.buf + 1, (unsigned char)u.buf[0] - 1, 1, fd) != 1)
+			return -1;
+
+		if (u.intf.bLength == sizeof u.intf
+		 && u.intf.bDescriptorType == USB_DT_INTERFACE
+		 && u.intf.bNumEndpoints == 2
+		 && u.intf.bInterfaceClass == USB_CLASS_VENDOR_SPEC
+		 && u.intf.bInterfaceSubClass == 0
+		 && u.intf.bInterfaceProtocol == 0)
+			return (unsigned char)u.intf.bInterfaceNumber;
+	}
+}
+
+static int testdev_ifnum(FILE *fd)
+{
+	struct usb_device_descriptor dev;
+
+	if (fread(&dev, sizeof dev, 1, fd) != 1)
+		return -1;
+
+	if (dev.bLength != sizeof dev || dev.bDescriptorType != USB_DT_DEVICE)
+		return -1;
+
+	/* FX2 with (tweaked) bulksrc firmware */
+	if (dev.idVendor == 0x0547 && dev.idProduct == 0x1002)
+		return 0;
+
+	/*----------------------------------------------------*/
+
+	/* devices that start up using the EZ-USB default device and
+	 * which we can use after loading simple firmware.  hotplug
+	 * can fxload it, and then run this test driver.
+	 *
+	 * we return false positives in two cases:
+	 * - the device has a "real" driver (maybe usb-serial) that
+	 *   renumerates.  the device should vanish quickly.
+	 * - the device doesn't have the test firmware installed.
+	 */
+
+	/* generic EZ-USB FX controller */
+	if (dev.idVendor == 0x0547 && dev.idProduct == 0x2235)
+		return 0;
+
+	/* generic EZ-USB FX2 controller */
+	if (dev.idVendor == 0x04b4 && dev.idProduct == 0x8613)
+		return 0;
+
+	/* CY3671 development board with EZ-USB FX */
+	if (dev.idVendor == 0x0547 && dev.idProduct == 0x0080)
+		return 0;
+
+	/* Keyspan 19Qi uses an21xx (original EZ-USB) */
+	if (dev.idVendor == 0x06cd && dev.idProduct == 0x010b)
+		return 0;
+
+	/*----------------------------------------------------*/
+
+	/* "gadget zero", Linux-USB test software */
+	if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a0)
+		return 0;
+
+	/* user mode subset of that */
+	if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a4)
+		return testdev_ffs_ifnum(fd);
+		/* return 0; */
+
+	/* iso version of usermode code */
+	if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a3)
+		return 0;
+
+	/* some GPL'd test firmware uses these IDs */
+
+	if (dev.idVendor == 0xfff0 && dev.idProduct == 0xfff0)
+		return 0;
+
+	/*----------------------------------------------------*/
+
+	/* iBOT2 high speed webcam */
+	if (dev.idVendor == 0x0b62 && dev.idProduct == 0x0059)
+		return 0;
+
+	/*----------------------------------------------------*/
+
+	/* the FunctionFS gadget can have the source/sink interface
+	 * anywhere.  We look for an interface descriptor that match
+	 * what we expect.  We ignore configuratiens thou. */
+
+	if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4ac
+	 && (dev.bDeviceClass == USB_CLASS_PER_INTERFACE
+	  || dev.bDeviceClass == USB_CLASS_VENDOR_SPEC))
+		return testdev_ffs_ifnum(fd);
+
+	return -1;
+}
+
+static int find_testdev(const char *name, const struct stat *sb, int flag)
+{
+	FILE				*fd;
+	int				ifnum;
+	struct testdev			*entry;
+
+	(void)sb; /* unused */
+
+	if (flag != FTW_F)
+		return 0;
+	/* ignore /proc/bus/usb/{devices,drivers} */
+	if (strrchr(name, '/')[1] == 'd')
+		return 0;
+
+	fd = fopen(name, "rb");
+	if (!fd) {
+		perror(name);
+		return 0;
+	}
+
+	ifnum = testdev_ifnum(fd);
+	fclose(fd);
+	if (ifnum < 0)
+		return 0;
+
+	entry = calloc(1, sizeof *entry);
+	if (!entry)
+		goto nomem;
+
+	entry->name = strdup(name);
+	if (!entry->name) {
+		free(entry);
+nomem:
+		perror("malloc");
+		return 0;
+	}
+
+	entry->ifnum = ifnum;
+
+	/* FIXME ask usbfs what speed; update USBDEVFS_CONNECTINFO so
+	 * it tells about high speed etc */
+
+	fprintf(stderr, "%s speed\t%s\t%u\n",
+		speed(entry->speed), entry->name, entry->ifnum);
+
+	entry->next = testdevs;
+	testdevs = entry;
+	return 0;
+}
+
+static int
+usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
+{
+	struct usbdevfs_ioctl	wrapper;
+
+	wrapper.ifno = ifno;
+	wrapper.ioctl_code = request;
+	wrapper.data = param;
+
+	return ioctl (fd, USBDEVFS_IOCTL, &wrapper);
+}
+
+static void *handle_testdev (void *arg)
+{
+	struct testdev		*dev = arg;
+	int			fd, i;
+	int			status;
+
+	if ((fd = open (dev->name, O_RDWR)) < 0) {
+		perror ("can't open dev file r/w");
+		return 0;
+	}
+
+restart:
+	for (i = 0; i < TEST_CASES; i++) {
+		if (dev->test != -1 && dev->test != i)
+			continue;
+		dev->param.test_num = i;
+
+		status = usbdev_ioctl (fd, dev->ifnum,
+				USBTEST_REQUEST, &dev->param);
+		if (status < 0 && errno == EOPNOTSUPP)
+			continue;
+
+		/* FIXME need a "syslog it" option for background testing */
+
+		/* NOTE: each thread emits complete lines; no fragments! */
+		if (status < 0) {
+			char	buf [80];
+			int	err = errno;
+
+			if (strerror_r (errno, buf, sizeof buf)) {
+				snprintf (buf, sizeof buf, "error %d", err);
+				errno = err;
+			}
+			printf ("%s test %d --> %d (%s)\n",
+				dev->name, i, errno, buf);
+		} else
+			printf ("%s test %d, %4d.%.06d secs\n", dev->name, i,
+				(int) dev->param.duration.tv_sec,
+				(int) dev->param.duration.tv_usec);
+
+		fflush (stdout);
+	}
+	if (dev->forever)
+		goto restart;
+
+	close (fd);
+	return arg;
+}
+
+static const char *usbfs_dir_find(void)
+{
+	static char usbfs_path_0[] = "/dev/usb/devices";
+	static char usbfs_path_1[] = "/proc/bus/usb/devices";
+
+	static char *const usbfs_paths[] = {
+		usbfs_path_0, usbfs_path_1
+	};
+
+	static char *const *
+		end = usbfs_paths + sizeof usbfs_paths / sizeof *usbfs_paths;
+
+	char *const *it = usbfs_paths;
+	do {
+		int fd = open(*it, O_RDONLY);
+		close(fd);
+		if (fd >= 0) {
+			strrchr(*it, '/')[0] = '\0';
+			return *it;
+		}
+	} while (++it != end);
+
+	return NULL;
+}
+
+static int parse_num(unsigned *num, const char *str)
+{
+	unsigned long val;
+	char *end;
+
+	errno = 0;
+	val = strtoul(str, &end, 0);
+	if (errno || *end || val > UINT_MAX)
+		return -1;
+	*num = val;
+	return 0;
+}
+
+int main (int argc, char **argv)
+{
+
+	int			c;
+	struct testdev		*entry;
+	char			*device;
+	const char		*usbfs_dir = NULL;
+	int			all = 0, forever = 0, not = 0;
+	int			test = -1 /* all */;
+	struct usbtest_param	param;
+
+	/* pick defaults that works with all speeds, without short packets.
+	 *
+	 * Best per-frame data rates:
+	 *     high speed, bulk       512 * 13 * 8 = 53248
+	 *                 interrupt 1024 *  3 * 8 = 24576
+	 *     full speed, bulk/intr   64 * 19     =  1216
+	 *                 interrupt   64 *  1     =    64
+	 *      low speed, interrupt    8 *  1     =     8
+	 */
+	param.iterations = 1000;
+	param.length = 512;
+	param.vary = 512;
+	param.sglen = 32;
+
+	/* for easy use when hotplugging */
+	device = getenv ("DEVICE");
+
+	while ((c = getopt (argc, argv, "D:aA:c:g:hns:t:v:")) != EOF)
+	switch (c) {
+	case 'D':	/* device, if only one */
+		device = optarg;
+		continue;
+	case 'A':	/* use all devices with specified usbfs dir */
+		usbfs_dir = optarg;
+		/* FALL THROUGH */
+	case 'a':	/* use all devices */
+		device = NULL;
+		all = 1;
+		continue;
+	case 'c':	/* count iterations */
+		if (parse_num(&param.iterations, optarg))
+			goto usage;
+		continue;
+	case 'g':	/* scatter/gather entries */
+		if (parse_num(&param.sglen, optarg))
+			goto usage;
+		continue;
+	case 'l':	/* loop forever */
+		forever = 1;
+		continue;
+	case 'n':	/* no test running! */
+		not = 1;
+		continue;
+	case 's':	/* size of packet */
+		if (parse_num(&param.length, optarg))
+			goto usage;
+		continue;
+	case 't':	/* run just one test */
+		test = atoi (optarg);
+		if (test < 0)
+			goto usage;
+		continue;
+	case 'v':	/* vary packet size by ... */
+		if (parse_num(&param.vary, optarg))
+			goto usage;
+		continue;
+	case '?':
+	case 'h':
+	default:
+usage:
+		fprintf (stderr, "usage: %s [-n] [-D dev | -a | -A usbfs-dir]\n"
+			"\t[-c iterations]  [-t testnum]\n"
+			"\t[-s packetsize] [-g sglen] [-v vary]\n",
+			argv [0]);
+		return 1;
+	}
+	if (optind != argc)
+		goto usage;
+	if (!all && !device) {
+		fprintf (stderr, "must specify '-a' or '-D dev', "
+			"or DEVICE=/proc/bus/usb/BBB/DDD in env\n");
+		goto usage;
+	}
+
+	/* Find usbfs mount point */
+	if (!usbfs_dir) {
+		usbfs_dir = usbfs_dir_find();
+		if (!usbfs_dir) {
+			fputs ("usbfs files are missing\n", stderr);
+			return -1;
+		}
+	}
+
+	/* collect and list the test devices */
+	if (ftw (usbfs_dir, find_testdev, 3) != 0) {
+		fputs ("ftw failed; is usbfs missing?\n", stderr);
+		return -1;
+	}
+
+	/* quit, run single test, or create test threads */
+	if (!testdevs && !device) {
+		fputs ("no test devices recognized\n", stderr);
+		return -1;
+	}
+	if (not)
+		return 0;
+	if (testdevs && testdevs->next == 0 && !device)
+		device = testdevs->name;
+	for (entry = testdevs; entry; entry = entry->next) {
+		int	status;
+
+		entry->param = param;
+		entry->forever = forever;
+		entry->test = test;
+
+		if (device) {
+			if (strcmp (entry->name, device))
+				continue;
+			return handle_testdev (entry) != entry;
+		}
+		status = pthread_create (&entry->thread, 0, handle_testdev, entry);
+		if (status) {
+			perror ("pthread_create");
+			continue;
+		}
+	}
+	if (device) {
+		struct testdev		dev;
+
+		/* kernel can recognize test devices we don't */
+		fprintf (stderr, "%s: %s may see only control tests\n",
+				argv [0], device);
+
+		memset (&dev, 0, sizeof dev);
+		dev.name = device;
+		dev.param = param;
+		dev.forever = forever;
+		dev.test = test;
+		return handle_testdev (&dev) != &dev;
+	}
+
+	/* wait for tests to complete */
+	for (entry = testdevs; entry; entry = entry->next) {
+		void	*retval;
+
+		if (pthread_join (entry->thread, &retval))
+			perror ("pthread_join");
+		/* testing errors discarded! */
+	}
+
+	return 0;
+}