Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)

565 files changed, 52933 insertions, 14903 deletions

diff --git a/Documentation/DocBook/.gitignore b/Documentation/DocBook/.gitignore
index 679034cbd68..720f245ceb1 100644
--- a/Documentation/DocBook/.gitignore
+++ b/Documentation/DocBook/.gitignore
@@ -8,4 +8,7 @@
 *.dvi
 *.log
 *.out
-media/
+*.png
+*.gif
+media-indices.tmpl
+media-entities.tmpl
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 3cebfa0d161..66725a3d30d 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -14,7 +14,9 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    80211.xml debugobjects.xml sh.xml regulator.xml \
 	    alsa-driver-api.xml writing-an-alsa-driver.xml \
-	    tracepoint.xml media.xml drm.xml
+	    tracepoint.xml drm.xml media_api.xml
+
+include $(srctree)/Documentation/DocBook/media/Makefile
 
 ###
 # The build process is as follows (targets):
@@ -32,7 +34,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -45,27 +47,14 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
 pdfdocs: $(PDF)
 
 HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: $(HTML) xmldoclinks
+htmldocs: $(HTML)
 	$(call build_main_index)
 	$(call build_images)
+	$(call install_media_images)
 
 MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 
-build_images = mkdir -p $(objtree)/Documentation/DocBook/media/ && \
-	       cp $(srctree)/Documentation/DocBook/dvb/*.png \
-	          $(srctree)/Documentation/DocBook/v4l/*.gif \
-		  $(objtree)/Documentation/DocBook/media/
-
-xmldoclinks:
-ifneq ($(objtree),$(srctree))
-	for dep in dvb media-entities.tmpl media-indices.tmpl v4l; do \
-		rm -f $(objtree)/Documentation/DocBook/$$dep \
-		&& ln -s $(srctree)/Documentation/DocBook/$$dep $(objtree)/Documentation/DocBook/ \
-		|| exit; \
-	done
-endif
-
 installmandocs: mandocs
 	mkdir -p /usr/local/man/man9/
 	install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/
@@ -97,11 +86,11 @@ define rule_docproc
         ) > $(dir $@).$(notdir $@).cmd
 endef
 
-%.xml: %.tmpl xmldoclinks FORCE
+%.xml: %.tmpl FORCE
 	$(call if_changed_rule,docproc)
 
 ###
-#Read in all saved dependency files 
+#Read in all saved dependency files
 cmd_files := $(wildcard $(foreach f,$(BOOKS),$(dir $(f)).$(notdir $(f)).cmd))
 
 ifneq ($(cmd_files),)
@@ -150,7 +139,7 @@ quiet_cmd_db2pdf = PDF     $@
 
 index = index.html
 main_idx = Documentation/DocBook/$(index)
-build_main_index = rm -rf $(main_idx) && \
+build_main_index = rm -rf $(main_idx); \
 		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
 		   cat $(HTML) >> $(main_idx)
@@ -242,7 +231,7 @@ clean-files := $(DOCBOOKS) \
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 
-cleandocs:
+cleandocs: cleanmediadocs
 	$(Q)rm -f $(call objectify, $(clean-files))
 	$(Q)rm -rf $(call objectify, $(clean-dirs))
 
diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml
deleted file mode 100644
index b5365f61d69..00000000000
--- a/Documentation/DocBook/dvb/dvbproperty.xml
+++ /dev/null
@@ -1,590 +0,0 @@
-<section id="FE_GET_SET_PROPERTY">
-<title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
-
-<programlisting>
-/* Reserved fields should be set to 0 */
-struct dtv_property {
-	__u32 cmd;
-	union {
-		__u32 data;
-		struct {
-			__u8 data[32];
-			__u32 len;
-			__u32 reserved1[3];
-			void *reserved2;
-		} buffer;
-	} u;
-	int result;
-} __attribute__ ((packed));
-
-/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
-#define DTV_IOCTL_MAX_MSGS 64
-
-struct dtv_properties {
-	__u32 num;
-	struct dtv_property *props;
-};
-</programlisting>
-
-<section id="FE_GET_PROPERTY">
-<title>FE_GET_PROPERTY</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This ioctl call returns one or more frontend properties. This call only
- requires read-only access to the device.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>,
- dtv_properties &#x22C6;props);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry align="char">
-<para>int fd</para>
-</entry><entry
- align="char">
-<para>File descriptor returned by a previous call to open().</para>
-</entry>
- </row><row><entry
- align="char">
-<para>int num</para>
-</entry><entry
- align="char">
-<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>struct dtv_property *props</para>
-</entry><entry
- align="char">
-<para>Points to the location where the front-end property commands are stored.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>ERRORS</para>
-<informaltable><tgroup cols="2"><tbody><row>
-  <entry align="char"><para>EINVAL</para></entry>
-  <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry>
- </row><row>
-  <entry align="char"><para>ENOMEM</para></entry>
-  <entry align="char"><para>Out of memory.</para></entry>
- </row><row>
-  <entry align="char"><para>EFAULT</para></entry>
-  <entry align="char"><para>Failure while copying data from/to userspace.</para></entry>
- </row><row>
-  <entry align="char"><para>EOPNOTSUPP</para></entry>
-  <entry align="char"><para>Property type not supported.</para></entry>
- </row></tbody></tgroup></informaltable>
-</section>
-
-<section id="FE_SET_PROPERTY">
-<title>FE_SET_PROPERTY</title>
-<para>DESCRIPTION
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>This ioctl call sets one or more frontend properties. This call only
- requires read-only access to the device.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>SYNOPSIS
-</para>
-<informaltable><tgroup cols="1"><tbody><row><entry
- align="char">
-<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
- dtv_properties &#x22C6;props);</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>PARAMETERS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry align="char">
-<para>int fd</para>
-</entry><entry
- align="char">
-<para>File descriptor returned by a previous call to open().</para>
-</entry>
- </row><row><entry
- align="char">
-<para>int num</para>
-</entry><entry
- align="char">
-<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>struct dtv_property *props</para>
-</entry><entry
- align="char">
-<para>Points to the location where the front-end property commands are stored.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row>
-  <entry align="char"><para>EINVAL</para></entry>
-  <entry align="char"><para>Invalid parameter(s) received or number of parameters out of the range.</para></entry>
- </row><row>
-  <entry align="char"><para>ENOMEM</para></entry>
-  <entry align="char"><para>Out of memory.</para></entry>
- </row><row>
-  <entry align="char"><para>EFAULT</para></entry>
-  <entry align="char"><para>Failure while copying data from/to userspace.</para></entry>
- </row><row>
-  <entry align="char"><para>EOPNOTSUPP</para></entry>
-  <entry align="char"><para>Property type not supported.</para></entry>
- </row></tbody></tgroup></informaltable>
-</section>
-
-<section>
-	<title>Property types</title>
-<para>
-On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
-the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to
-get/set up to 64 properties. The actual meaning of each property is described on the next sections.
-</para>
-
-<para>The available frontend property types are:</para>
-<programlisting>
-#define DTV_UNDEFINED		0
-#define DTV_TUNE		1
-#define DTV_CLEAR		2
-#define DTV_FREQUENCY		3
-#define DTV_MODULATION		4
-#define DTV_BANDWIDTH_HZ	5
-#define DTV_INVERSION		6
-#define DTV_DISEQC_MASTER	7
-#define DTV_SYMBOL_RATE		8
-#define DTV_INNER_FEC		9
-#define DTV_VOLTAGE		10
-#define DTV_TONE		11
-#define DTV_PILOT		12
-#define DTV_ROLLOFF		13
-#define DTV_DISEQC_SLAVE_REPLY	14
-#define DTV_FE_CAPABILITY_COUNT	15
-#define DTV_FE_CAPABILITY	16
-#define DTV_DELIVERY_SYSTEM	17
-#define DTV_ISDBT_PARTIAL_RECEPTION	18
-#define DTV_ISDBT_SOUND_BROADCASTING	19
-#define DTV_ISDBT_SB_SUBCHANNEL_ID	20
-#define DTV_ISDBT_SB_SEGMENT_IDX	21
-#define DTV_ISDBT_SB_SEGMENT_COUNT	22
-#define DTV_ISDBT_LAYERA_FEC			23
-#define DTV_ISDBT_LAYERA_MODULATION		24
-#define DTV_ISDBT_LAYERA_SEGMENT_COUNT		25
-#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING	26
-#define DTV_ISDBT_LAYERB_FEC			27
-#define DTV_ISDBT_LAYERB_MODULATION		28
-#define DTV_ISDBT_LAYERB_SEGMENT_COUNT		29
-#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING	30
-#define DTV_ISDBT_LAYERC_FEC			31
-#define DTV_ISDBT_LAYERC_MODULATION		32
-#define DTV_ISDBT_LAYERC_SEGMENT_COUNT		33
-#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING	34
-#define DTV_API_VERSION		35
-#define DTV_CODE_RATE_HP	36
-#define DTV_CODE_RATE_LP	37
-#define DTV_GUARD_INTERVAL	38
-#define DTV_TRANSMISSION_MODE	39
-#define DTV_HIERARCHY		40
-#define DTV_ISDBT_LAYER_ENABLED	41
-#define DTV_ISDBS_TS_ID		42
-</programlisting>
-</section>
-
-<section id="fe_property_common">
-	<title>Parameters that are common to all Digital TV standards</title>
-	<section id="DTV_FREQUENCY">
-		<title><constant>DTV_FREQUENCY</constant></title>
-
-		<para>Central frequency of the channel, in HZ.</para>
-
-		<para>Notes:</para>
-		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
-			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
-			the channel which is 6MHz.</para>
-
-		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
-			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
-			central frequency of the channel is expected.</para>
-	</section>
-
-	<section id="DTV_BANDWIDTH_HZ">
-		<title><constant>DTV_BANDWIDTH_HZ</constant></title>
-
-		<para>Bandwidth for the channel, in HZ.</para>
-
-		<para>Possible values:
-			<constant>1712000</constant>,
-			<constant>5000000</constant>,
-			<constant>6000000</constant>,
-			<constant>7000000</constant>,
-			<constant>8000000</constant>,
-			<constant>10000000</constant>.
-		</para>
-
-		<para>Notes:</para>
-
-		<para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para>
-		<para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para>
-		<para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth
-			 for DVB-C depends on the symbol rate</para>
-		<para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
-			other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
-			DTV_ISDBT_SB_SEGMENT_COUNT).</para>
-		<para>5) DVB-T supports 6, 7 and 8MHz.</para>
-		<para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para>
-	</section>
-
-	<section id="DTV_DELIVERY_SYSTEM">
-		<title><constant>DTV_DELIVERY_SYSTEM</constant></title>
-
-		<para>Specifies the type of Delivery system</para>
-
-		<para>Possible values: </para>
-<programlisting>
-typedef enum fe_delivery_system {
-	SYS_UNDEFINED,
-	SYS_DVBC_ANNEX_AC,
-	SYS_DVBC_ANNEX_B,
-	SYS_DVBT,
-	SYS_DSS,
-	SYS_DVBS,
-	SYS_DVBS2,
-	SYS_DVBH,
-	SYS_ISDBT,
-	SYS_ISDBS,
-	SYS_ISDBC,
-	SYS_ATSC,
-	SYS_ATSCMH,
-	SYS_DMBTH,
-	SYS_CMMB,
-	SYS_DAB,
-	SYS_DVBT2,
-} fe_delivery_system_t;
-</programlisting>
-
-	</section>
-
-	<section id="DTV_TRANSMISSION_MODE">
-		<title><constant>DTV_TRANSMISSION_MODE</constant></title>
-
-		<para>Specifies the number of carriers used by the standard</para>
-
-		<para>Possible values are:</para>
-<programlisting>
-typedef enum fe_transmit_mode {
-	TRANSMISSION_MODE_2K,
-	TRANSMISSION_MODE_8K,
-	TRANSMISSION_MODE_AUTO,
-	TRANSMISSION_MODE_4K,
-	TRANSMISSION_MODE_1K,
-	TRANSMISSION_MODE_16K,
-	TRANSMISSION_MODE_32K,
-} fe_transmit_mode_t;
-</programlisting>
-
-		<para>Notes:</para>
-		<para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
-			'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
-
-		<para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
-			hardware will try to find the correct FFT-size (if capable) and will
-			use TMCC to fill in the missing parameters.</para>
-		<para>3) DVB-T specifies 2K and 8K as valid sizes.</para>
-		<para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para>
-	</section>
-
-	<section id="DTV_GUARD_INTERVAL">
-		<title><constant>DTV_GUARD_INTERVAL</constant></title>
-
-		<para>Possible values are:</para>
-<programlisting>
-typedef enum fe_guard_interval {
-	GUARD_INTERVAL_1_32,
-	GUARD_INTERVAL_1_16,
-	GUARD_INTERVAL_1_8,
-	GUARD_INTERVAL_1_4,
-	GUARD_INTERVAL_AUTO,
-	GUARD_INTERVAL_1_128,
-	GUARD_INTERVAL_19_128,
-	GUARD_INTERVAL_19_256,
-} fe_guard_interval_t;
-</programlisting>
-
-		<para>Notes:</para>
-		<para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
-			try to find the correct guard interval (if capable) and will use TMCC to fill
-			in the missing parameters.</para>
-		<para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para>
-	</section>
-</section>
-
-<section id="isdbt">
-	<title>ISDB-T frontend</title>
-	<para>This section describes shortly what are the possible parameters in the Linux
-		DVB-API called "S2API" and now DVB API 5 in order to tune an ISDB-T/ISDB-Tsb
-		demodulator:</para>
-
-	<para>This ISDB-T/ISDB-Tsb API extension should reflect all information
-		needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
-		that some very sophisticated devices won't need certain parameters to
-		tune.</para>
-
-	<para>The information given here should help application writers to know how
-		to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>
-
-	<para>The details given here about ISDB-T and ISDB-Tsb are just enough to
-		basically show the dependencies between the needed parameter values,
-		but surely some information is left out. For more detailed information
-		see the following documents:</para>
-
-	<para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
-		Television Broadcasting" and</para>
-	<para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
-		Television Broadcasting".</para>
-
-	<para>In order to read this document one has to have some knowledge the
-		channel structure in ISDB-T and ISDB-Tsb. I.e. it has to be known to
-		the reader that an ISDB-T channel consists of 13 segments, that it can
-		have up to 3 layer sharing those segments, and things like that.</para>
-
-	<para>Parameters used by ISDB-T and ISDB-Tsb.</para>
-
-	<section id="isdbt-new-parms">
-		<title>ISDB-T only parameters</title>
-
-		<section id="isdbt-part-rec">
-			<title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>
-
-			<para><constant>If DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
-				the channel is in partial reception mode or not.</para>
-
-			<para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
-				<constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>
-
-			<para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
-				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
-				is consisting of one segment and layer or three segments and two layers.</para>
-
-			<para>Possible values: 0, 1, -1 (AUTO)</para>
-		</section>
-
-		<section id="isdbt-sound-bcast">
-			<title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>
-
-			<para>This field represents whether the other DTV_ISDBT_*-parameters are
-				referring to an ISDB-T and an ISDB-Tsb channel. (See also
-				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>
-
-			<para>Possible values: 0, 1, -1 (AUTO)</para>
-		</section>
-
-		<section id="isdbt-sb-ch-id">
-			<title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>
-
-			<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
-
-			<para>(Note of the author: This might not be the correct description of the
-				<constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
-				background needed to program a device)</para>
-
-			<para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
-				set of connected ISDB-Tsb channels. In this set of channels every
-				channel can be received independently. The number of connected
-				ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
-				bandwidth available.</para>
-
-			<para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
-				broadcaster has several possibilities to put those channels in the
-				air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
-				segments from position 1-8 to 5-13 or anything in between.</para>
-
-			<para>The underlying layer of segments are subchannels: each segment is
-				consisting of several subchannels with a predefined IDs. A sub-channel
-				is used to help the demodulator to synchronize on the channel.</para>
-
-			<para>An ISDB-T channel is always centered over all sub-channels. As for
-				the example above, in ISDB-Tsb it is no longer as simple as that.</para>
-
-			<para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
-				sub-channel ID of the segment to be demodulated.</para>
-
-			<para>Possible values: 0 .. 41, -1 (AUTO)</para>
-		</section>
-
-		<section id="isdbt-sb-seg-idx">
-
-			<title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>
-
-			<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
-
-			<para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
-				demodulated for an ISDB-Tsb channel where several of them are
-				transmitted in the connected manner.</para>
-
-			<para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>
-
-			<para>Note: This value cannot be determined by an automatic channel search.</para>
-		</section>
-
-		<section id="isdbt-sb-seg-cnt">
-			<title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>
-
-			<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
-
-			<para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
-				channels.</para>
-
-			<para>Possible values: 1 .. 13</para>
-
-			<para>Note: This value cannot be determined by an automatic channel search.</para>
-		</section>
-
-		<section id="isdb-hierq-layers">
-			<title>Hierarchical layers</title>
-
-			<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
-				ISDB-T hierarchical layers can be decoded simultaneously. For that
-				reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>
-
-			<para>ISDB-T has 3 hierarchical layers which each can use a part of the
-				available segments. The total number of segments over all layers has
-				to 13 in ISDB-T.</para>
-
-			<section id="isdbt-layer-ena">
-				<title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>
-
-				<para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
-					layers in the decoding process. Setting all bits of
-					<constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
-					demodulated. This is the default.</para>
-
-				<para>If the channel is in the partial reception mode
-					(<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
-					independently of the other 12 segments. In that mode layer A has to
-					have a <constant>SEGMENT_COUNT</constant> of 1.</para>
-
-				<para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
-					according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
-					accordingly.</para>
-
-				<para>Possible values: 0x1, 0x2, 0x4 (|-able)</para>
-
-				<para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
-				<para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
-				<para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
-				<para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
-			</section>
-
-			<section id="isdbt-layer-fec">
-				<title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>
-
-				<para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
-			</section>
-
-			<section id="isdbt-layer-mod">
-				<title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>
-
-				<para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>
-
-				<para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
-					and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
-			</section>
-
-			<section id="isdbt-layer-seg-cnt">
-				<title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>
-
-				<para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>
-
-				<para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
-					<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>
-
-				<informaltable id="isdbt-layer_seg-cnt-table">
-					<tgroup cols="6">
-
-						<tbody>
-							<row>
-								<entry>PR</entry>
-								<entry>SB</entry>
-								<entry>Layer A width</entry>
-								<entry>Layer B width</entry>
-								<entry>Layer C width</entry>
-								<entry>total width</entry>
-							</row>
-
-							<row>
-								<entry>0</entry>
-								<entry>0</entry>
-								<entry>1 .. 13</entry>
-								<entry>1 .. 13</entry>
-								<entry>1 .. 13</entry>
-								<entry>13</entry>
-							</row>
-
-							<row>
-								<entry>1</entry>
-								<entry>0</entry>
-								<entry>1</entry>
-								<entry>1 .. 13</entry>
-								<entry>1 .. 13</entry>
-								<entry>13</entry>
-							</row>
-
-							<row>
-								<entry>0</entry>
-								<entry>1</entry>
-								<entry>1</entry>
-								<entry>0</entry>
-								<entry>0</entry>
-								<entry>1</entry>
-							</row>
-
-							<row>
-								<entry>1</entry>
-								<entry>1</entry>
-								<entry>1</entry>
-								<entry>2</entry>
-								<entry>0</entry>
-								<entry>13</entry>
-							</row>
-						</tbody>
-
-					</tgroup>
-				</informaltable>
-
-			</section>
-
-			<section id="isdbt_layer_t_interl">
-				<title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>
-
-				<para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>
-
-				<para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
-					here are referring to what can be found in the TMCC-structure -
-					independent of the mode.</para>
-			</section>
-		</section>
-	</section>
-	<section id="dvbt2-params">
-		<title>DVB-T2 parameters</title>
-		
-		<para>This section covers parameters that apply only to the DVB-T2 delivery method. DVB-T2
-			support is currently in the early stages development so expect this section to grow
-			and become more detailed with time.</para>
-
-		<section id="dvbt2-plp-id">
-			<title><constant>DTV_DVBT2_PLP_ID</constant></title>
-
-			<para>DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of
-				many data types via a single multiplex. The API will soon support this
-				at which point this section will be expanded.</para>
-		</section>
-	</section>
-</section>
-</section>
diff --git a/Documentation/DocBook/dvb/dvbstb.png b/Documentation/DocBook/dvb/dvbstb.png
deleted file mode 100644
index 9b8f372e7af..00000000000
--- a/Documentation/DocBook/dvb/dvbstb.png
+++ /dev/null
diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml
deleted file mode 100644
index d792f789ad3..00000000000
--- a/Documentation/DocBook/dvb/frontend.h.xml
+++ /dev/null
@@ -1,428 +0,0 @@
-<programlisting>
-/*
- * frontend.h
- *
- * Copyright (C) 2000 Marcus Metzler &lt;marcus@convergence.de&gt;
- *                  Ralph  Metzler &lt;ralph@convergence.de&gt;
- *                  Holger Waechtler &lt;holger@convergence.de&gt;
- *                  Andre Draszik &lt;ad@convergence.de&gt;
- *                  for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBFRONTEND_H_
-#define _DVBFRONTEND_H_
-
-#include &lt;linux/types.h&gt;
-
-typedef enum fe_type {
-        FE_QPSK,
-        FE_QAM,
-        FE_OFDM,
-        FE_ATSC
-} fe_type_t;
-
-
-typedef enum fe_caps {
-        FE_IS_STUPID                    = 0,
-        FE_CAN_INVERSION_AUTO           = 0x1,
-        FE_CAN_FEC_1_2                  = 0x2,
-        FE_CAN_FEC_2_3                  = 0x4,
-        FE_CAN_FEC_3_4                  = 0x8,
-        FE_CAN_FEC_4_5                  = 0x10,
-        FE_CAN_FEC_5_6                  = 0x20,
-        FE_CAN_FEC_6_7                  = 0x40,
-        FE_CAN_FEC_7_8                  = 0x80,
-        FE_CAN_FEC_8_9                  = 0x100,
-        FE_CAN_FEC_AUTO                 = 0x200,
-        FE_CAN_QPSK                     = 0x400,
-        FE_CAN_QAM_16                   = 0x800,
-        FE_CAN_QAM_32                   = 0x1000,
-        FE_CAN_QAM_64                   = 0x2000,
-        FE_CAN_QAM_128                  = 0x4000,
-        FE_CAN_QAM_256                  = 0x8000,
-        FE_CAN_QAM_AUTO                 = 0x10000,
-        FE_CAN_TRANSMISSION_MODE_AUTO   = 0x20000,
-        FE_CAN_BANDWIDTH_AUTO           = 0x40000,
-        FE_CAN_GUARD_INTERVAL_AUTO      = 0x80000,
-        FE_CAN_HIERARCHY_AUTO           = 0x100000,
-        FE_CAN_8VSB                     = 0x200000,
-        FE_CAN_16VSB                    = 0x400000,
-        FE_HAS_EXTENDED_CAPS            = 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
-        FE_CAN_TURBO_FEC                = 0x8000000,  /* frontend supports "turbo fec modulation" */
-        FE_CAN_2G_MODULATION            = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
-        FE_NEEDS_BENDING                = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
-        FE_CAN_RECOVER                  = 0x40000000, /* frontend can recover from a cable unplug automatically */
-        FE_CAN_MUTE_TS                  = 0x80000000  /* frontend can stop spurious TS data output */
-} fe_caps_t;
-
-
-struct dvb_frontend_info {
-        char       name[128];
-        fe_type_t  type;
-        __u32      frequency_min;
-        __u32      frequency_max;
-        __u32      frequency_stepsize;
-        __u32      frequency_tolerance;
-        __u32      symbol_rate_min;
-        __u32      symbol_rate_max;
-        __u32      symbol_rate_tolerance;       /* ppm */
-        __u32      notifier_delay;              /* DEPRECATED */
-        fe_caps_t  caps;
-};
-
-
-/**
- *  Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
- *  the meaning of this struct...
- */
-struct dvb_diseqc_master_cmd {
-        __u8 msg [6];   /*  { framing, address, command, data [3] } */
-        __u8 msg_len;   /*  valid values are 3...6  */
-};
-
-
-struct dvb_diseqc_slave_reply {
-        __u8 msg [4];   /*  { framing, data [3] } */
-        __u8 msg_len;   /*  valid values are 0...4, 0 means no msg  */
-        int  timeout;   /*  return from ioctl after timeout ms with */
-};                      /*  errorcode when no message was received  */
-
-
-typedef enum fe_sec_voltage {
-        SEC_VOLTAGE_13,
-        SEC_VOLTAGE_18,
-        SEC_VOLTAGE_OFF
-} fe_sec_voltage_t;
-
-
-typedef enum fe_sec_tone_mode {
-        SEC_TONE_ON,
-        SEC_TONE_OFF
-} fe_sec_tone_mode_t;
-
-
-typedef enum fe_sec_mini_cmd {
-        SEC_MINI_A,
-        SEC_MINI_B
-} fe_sec_mini_cmd_t;
-
-
-typedef enum fe_status {
-        FE_HAS_SIGNAL   = 0x01,   /* found something above the noise level */
-        FE_HAS_CARRIER  = 0x02,   /* found a DVB signal  */
-        FE_HAS_VITERBI  = 0x04,   /* FEC is stable  */
-        FE_HAS_SYNC     = 0x08,   /* found sync bytes  */
-        FE_HAS_LOCK     = 0x10,   /* everything's working... */
-        FE_TIMEDOUT     = 0x20,   /* no lock within the last ~2 seconds */
-        FE_REINIT       = 0x40    /* frontend was reinitialized,  */
-} fe_status_t;                    /* application is recommended to reset */
-                                  /* DiSEqC, tone and parameters */
-
-typedef enum fe_spectral_inversion {
-        INVERSION_OFF,
-        INVERSION_ON,
-        INVERSION_AUTO
-} fe_spectral_inversion_t;
-
-
-typedef enum fe_code_rate {
-        FEC_NONE = 0,
-        FEC_1_2,
-        FEC_2_3,
-        FEC_3_4,
-        FEC_4_5,
-        FEC_5_6,
-        FEC_6_7,
-        FEC_7_8,
-        FEC_8_9,
-        FEC_AUTO,
-        FEC_3_5,
-        FEC_9_10,
-} fe_code_rate_t;
-
-
-typedef enum fe_modulation {
-        QPSK,
-        QAM_16,
-        QAM_32,
-        QAM_64,
-        QAM_128,
-        QAM_256,
-        QAM_AUTO,
-        VSB_8,
-        VSB_16,
-        PSK_8,
-        APSK_16,
-        APSK_32,
-        DQPSK,
-} fe_modulation_t;
-
-typedef enum fe_transmit_mode {
-        TRANSMISSION_MODE_2K,
-        TRANSMISSION_MODE_8K,
-        TRANSMISSION_MODE_AUTO,
-        TRANSMISSION_MODE_4K,
-        TRANSMISSION_MODE_1K,
-        TRANSMISSION_MODE_16K,
-        TRANSMISSION_MODE_32K,
-} fe_transmit_mode_t;
-
-typedef enum fe_bandwidth {
-        BANDWIDTH_8_MHZ,
-        BANDWIDTH_7_MHZ,
-        BANDWIDTH_6_MHZ,
-        BANDWIDTH_AUTO,
-        BANDWIDTH_5_MHZ,
-        BANDWIDTH_10_MHZ,
-        BANDWIDTH_1_712_MHZ,
-} fe_bandwidth_t;
-
-
-typedef enum fe_guard_interval {
-        GUARD_INTERVAL_1_32,
-        GUARD_INTERVAL_1_16,
-        GUARD_INTERVAL_1_8,
-        GUARD_INTERVAL_1_4,
-        GUARD_INTERVAL_AUTO,
-        GUARD_INTERVAL_1_128,
-        GUARD_INTERVAL_19_128,
-        GUARD_INTERVAL_19_256,
-} fe_guard_interval_t;
-
-
-typedef enum fe_hierarchy {
-        HIERARCHY_NONE,
-        HIERARCHY_1,
-        HIERARCHY_2,
-        HIERARCHY_4,
-        HIERARCHY_AUTO
-} fe_hierarchy_t;
-
-
-struct dvb_qpsk_parameters {
-        __u32           symbol_rate;  /* symbol rate in Symbols per second */
-        fe_code_rate_t  fec_inner;    /* forward error correction (see above) */
-};
-
-struct dvb_qam_parameters {
-        __u32           symbol_rate; /* symbol rate in Symbols per second */
-        fe_code_rate_t  fec_inner;   /* forward error correction (see above) */
-        fe_modulation_t modulation;  /* modulation type (see above) */
-};
-
-struct dvb_vsb_parameters {
-        fe_modulation_t modulation;  /* modulation type (see above) */
-};
-
-struct dvb_ofdm_parameters {
-        fe_bandwidth_t      bandwidth;
-        fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
-        fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
-        fe_modulation_t     constellation; /* modulation type (see above) */
-        fe_transmit_mode_t  transmission_mode;
-        fe_guard_interval_t guard_interval;
-        fe_hierarchy_t      hierarchy_information;
-};
-
-
-struct dvb_frontend_parameters {
-        __u32 frequency;     /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
-                             /* intermediate frequency in kHz for QPSK */
-        fe_spectral_inversion_t inversion;
-        union {
-                struct dvb_qpsk_parameters qpsk;
-                struct dvb_qam_parameters  qam;
-                struct dvb_ofdm_parameters ofdm;
-                struct dvb_vsb_parameters vsb;
-        } u;
-};
-
-
-struct dvb_frontend_event {
-        fe_status_t status;
-        struct dvb_frontend_parameters parameters;
-};
-
-/* S2API Commands */
-#define DTV_UNDEFINED           0
-#define DTV_TUNE                1
-#define DTV_CLEAR               2
-#define DTV_FREQUENCY           3
-#define DTV_MODULATION          4
-#define DTV_BANDWIDTH_HZ        5
-#define DTV_INVERSION           6
-#define DTV_DISEQC_MASTER       7
-#define DTV_SYMBOL_RATE         8
-#define DTV_INNER_FEC           9
-#define DTV_VOLTAGE             10
-#define DTV_TONE                11
-#define DTV_PILOT               12
-#define DTV_ROLLOFF             13
-#define DTV_DISEQC_SLAVE_REPLY  14
-
-/* Basic enumeration set for querying unlimited capabilities */
-#define DTV_FE_CAPABILITY_COUNT 15
-#define DTV_FE_CAPABILITY       16
-#define DTV_DELIVERY_SYSTEM     17
-
-/* ISDB-T and ISDB-Tsb */
-#define DTV_ISDBT_PARTIAL_RECEPTION     18
-#define DTV_ISDBT_SOUND_BROADCASTING    19
-
-#define DTV_ISDBT_SB_SUBCHANNEL_ID      20
-#define DTV_ISDBT_SB_SEGMENT_IDX        21
-#define DTV_ISDBT_SB_SEGMENT_COUNT      22
-
-#define DTV_ISDBT_LAYERA_FEC                    23
-#define DTV_ISDBT_LAYERA_MODULATION             24
-#define DTV_ISDBT_LAYERA_SEGMENT_COUNT          25
-#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING      26
-
-#define DTV_ISDBT_LAYERB_FEC                    27
-#define DTV_ISDBT_LAYERB_MODULATION             28
-#define DTV_ISDBT_LAYERB_SEGMENT_COUNT          29
-#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING      30
-
-#define DTV_ISDBT_LAYERC_FEC                    31
-#define DTV_ISDBT_LAYERC_MODULATION             32
-#define DTV_ISDBT_LAYERC_SEGMENT_COUNT          33
-#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING      34
-
-#define DTV_API_VERSION         35
-
-#define DTV_CODE_RATE_HP        36
-#define DTV_CODE_RATE_LP        37
-#define DTV_GUARD_INTERVAL      38
-#define DTV_TRANSMISSION_MODE   39
-#define DTV_HIERARCHY           40
-
-#define DTV_ISDBT_LAYER_ENABLED 41
-
-#define DTV_ISDBS_TS_ID         42
-
-#define DTV_DVBT2_PLP_ID	43
-
-#define DTV_MAX_COMMAND                         DTV_DVBT2_PLP_ID
-
-typedef enum fe_pilot {
-        PILOT_ON,
-        PILOT_OFF,
-        PILOT_AUTO,
-} fe_pilot_t;
-
-typedef enum fe_rolloff {
-        ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
-        ROLLOFF_20,
-        ROLLOFF_25,
-        ROLLOFF_AUTO,
-} fe_rolloff_t;
-
-typedef enum fe_delivery_system {
-        SYS_UNDEFINED,
-        SYS_DVBC_ANNEX_AC,
-        SYS_DVBC_ANNEX_B,
-        SYS_DVBT,
-        SYS_DSS,
-        SYS_DVBS,
-        SYS_DVBS2,
-        SYS_DVBH,
-        SYS_ISDBT,
-        SYS_ISDBS,
-        SYS_ISDBC,
-        SYS_ATSC,
-        SYS_ATSCMH,
-        SYS_DMBTH,
-        SYS_CMMB,
-        SYS_DAB,
-        SYS_DVBT2,
-} fe_delivery_system_t;
-
-struct dtv_cmds_h {
-        char    *name;          /* A display name for debugging purposes */
-
-        __u32   cmd;            /* A unique ID */
-
-        /* Flags */
-        __u32   set:1;          /* Either a set or get property */
-        __u32   buffer:1;       /* Does this property use the buffer? */
-        __u32   reserved:30;    /* Align */
-};
-
-struct dtv_property {
-        __u32 cmd;
-        __u32 reserved[3];
-        union {
-                __u32 data;
-                struct {
-                        __u8 data[32];
-                        __u32 len;
-                        __u32 reserved1[3];
-                        void *reserved2;
-                } buffer;
-        } u;
-        int result;
-} __attribute__ ((packed));
-
-/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
-#define DTV_IOCTL_MAX_MSGS 64
-
-struct dtv_properties {
-        __u32 num;
-        struct dtv_property *props;
-};
-
-#define <link linkend="FE_GET_PROPERTY">FE_SET_PROPERTY</link>            _IOW('o', 82, struct dtv_properties)
-#define <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>            _IOR('o', 83, struct dtv_properties)
-
-
-/**
- * When set, this flag will disable any zigzagging or other "normal" tuning
- * behaviour. Additionally, there will be no automatic monitoring of the lock
- * status, and hence no frontend events will be generated. If a frontend device
- * is closed, this flag will be automatically turned off when the device is
- * reopened read-write.
- */
-#define FE_TUNE_MODE_ONESHOT 0x01
-
-
-#define <link linkend="FE_GET_INFO">FE_GET_INFO</link>                _IOR('o', 61, struct dvb_frontend_info)
-
-#define <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link>   _IO('o', 62)
-#define <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link>  _IOW('o', 63, struct dvb_diseqc_master_cmd)
-#define <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> _IOR('o', 64, struct dvb_diseqc_slave_reply)
-#define <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link>       _IO('o', 65)  /* fe_sec_mini_cmd_t */
-
-#define <link linkend="FE_SET_TONE">FE_SET_TONE</link>                _IO('o', 66)  /* fe_sec_tone_mode_t */
-#define <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link>             _IO('o', 67)  /* fe_sec_voltage_t */
-#define <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link> _IO('o', 68)  /* int */
-
-#define <link linkend="FE_READ_STATUS">FE_READ_STATUS</link>             _IOR('o', 69, fe_status_t)
-#define <link linkend="FE_READ_BER">FE_READ_BER</link>                _IOR('o', 70, __u32)
-#define <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>    _IOR('o', 71, __u16)
-#define <link linkend="FE_READ_SNR">FE_READ_SNR</link>                _IOR('o', 72, __u16)
-#define <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> _IOR('o', 73, __u32)
-
-#define <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>            _IOW('o', 76, struct dvb_frontend_parameters)
-#define <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>            _IOR('o', 77, struct dvb_frontend_parameters)
-#define <link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link>  _IO('o', 81) /* unsigned int */
-#define <link linkend="FE_GET_EVENT">FE_GET_EVENT</link>               _IOR('o', 78, struct dvb_frontend_event)
-
-#define <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link> _IO('o', 80) /* unsigned int */
-
-#endif /*_DVBFRONTEND_H_*/
-</programlisting>
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
deleted file mode 100644
index e5fe09430fd..00000000000
--- a/Documentation/DocBook/media-entities.tmpl
+++ /dev/null
@@ -1,464 +0,0 @@
-<!-- Generated file! Do not edit. -->
-
-<!-- Functions -->
-<!ENTITY func-close "<link linkend='func-close'><function>close()</function></link>">
-<!ENTITY func-ioctl "<link linkend='func-ioctl'><function>ioctl()</function></link>">
-<!ENTITY func-mmap "<link linkend='func-mmap'><function>mmap()</function></link>">
-<!ENTITY func-munmap "<link linkend='func-munmap'><function>munmap()</function></link>">
-<!ENTITY func-open "<link linkend='func-open'><function>open()</function></link>">
-<!ENTITY func-poll "<link linkend='func-poll'><function>poll()</function></link>">
-<!ENTITY func-read "<link linkend='func-read'><function>read()</function></link>">
-<!ENTITY func-select "<link linkend='func-select'><function>select()</function></link>">
-<!ENTITY func-write "<link linkend='func-write'><function>write()</function></link>">
-
-<!ENTITY media-func-close "<link linkend='media-func-close'><function>close()</function></link>">
-<!ENTITY media-func-ioctl "<link linkend='media-func-ioctl'><function>ioctl()</function></link>">
-<!ENTITY media-func-open "<link linkend='media-func-open'><function>open()</function></link>">
-
-<!-- Ioctls -->
-<!ENTITY VIDIOC-CROPCAP "<link linkend='vidioc-cropcap'><constant>VIDIOC_CROPCAP</constant></link>">
-<!ENTITY VIDIOC-DBG-G-CHIP-IDENT "<link linkend='vidioc-dbg-g-chip-ident'><constant>VIDIOC_DBG_G_CHIP_IDENT</constant></link>">
-<!ENTITY VIDIOC-DBG-G-REGISTER "<link linkend='vidioc-dbg-g-register'><constant>VIDIOC_DBG_G_REGISTER</constant></link>">
-<!ENTITY VIDIOC-DBG-S-REGISTER "<link linkend='vidioc-dbg-g-register'><constant>VIDIOC_DBG_S_REGISTER</constant></link>">
-<!ENTITY VIDIOC-DQBUF "<link linkend='vidioc-qbuf'><constant>VIDIOC_DQBUF</constant></link>">
-<!ENTITY VIDIOC-DQEVENT "<link linkend='vidioc-dqevent'><constant>VIDIOC_DQEVENT</constant></link>">
-<!ENTITY VIDIOC-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_ENCODER_CMD</constant></link>">
-<!ENTITY VIDIOC-ENUMAUDIO "<link linkend='vidioc-enumaudio'><constant>VIDIOC_ENUMAUDIO</constant></link>">
-<!ENTITY VIDIOC-ENUMAUDOUT "<link linkend='vidioc-enumaudioout'><constant>VIDIOC_ENUMAUDOUT</constant></link>">
-<!ENTITY VIDIOC-ENUMINPUT "<link linkend='vidioc-enuminput'><constant>VIDIOC_ENUMINPUT</constant></link>">
-<!ENTITY VIDIOC-ENUMOUTPUT "<link linkend='vidioc-enumoutput'><constant>VIDIOC_ENUMOUTPUT</constant></link>">
-<!ENTITY VIDIOC-ENUMSTD "<link linkend='vidioc-enumstd'><constant>VIDIOC_ENUMSTD</constant></link>">
-<!ENTITY VIDIOC-ENUM-DV-PRESETS "<link linkend='vidioc-enum-dv-presets'><constant>VIDIOC_ENUM_DV_PRESETS</constant></link>">
-<!ENTITY VIDIOC-ENUM-FMT "<link linkend='vidioc-enum-fmt'><constant>VIDIOC_ENUM_FMT</constant></link>">
-<!ENTITY VIDIOC-ENUM-FRAMEINTERVALS "<link linkend='vidioc-enum-frameintervals'><constant>VIDIOC_ENUM_FRAMEINTERVALS</constant></link>">
-<!ENTITY VIDIOC-ENUM-FRAMESIZES "<link linkend='vidioc-enum-framesizes'><constant>VIDIOC_ENUM_FRAMESIZES</constant></link>">
-<!ENTITY VIDIOC-G-AUDIO "<link linkend='vidioc-g-audio'><constant>VIDIOC_G_AUDIO</constant></link>">
-<!ENTITY VIDIOC-G-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_G_AUDOUT</constant></link>">
-<!ENTITY VIDIOC-G-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_G_CROP</constant></link>">
-<!ENTITY VIDIOC-G-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_G_CTRL</constant></link>">
-<!ENTITY VIDIOC-G-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_G_DV_PRESET</constant></link>">
-<!ENTITY VIDIOC-G-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_G_DV_TIMINGS</constant></link>">
-<!ENTITY VIDIOC-G-ENC-INDEX "<link linkend='vidioc-g-enc-index'><constant>VIDIOC_G_ENC_INDEX</constant></link>">
-<!ENTITY VIDIOC-G-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_G_EXT_CTRLS</constant></link>">
-<!ENTITY VIDIOC-G-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_G_FBUF</constant></link>">
-<!ENTITY VIDIOC-G-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_G_FMT</constant></link>">
-<!ENTITY VIDIOC-G-FREQUENCY "<link linkend='vidioc-g-frequency'><constant>VIDIOC_G_FREQUENCY</constant></link>">
-<!ENTITY VIDIOC-G-INPUT "<link linkend='vidioc-g-input'><constant>VIDIOC_G_INPUT</constant></link>">
-<!ENTITY VIDIOC-G-JPEGCOMP "<link linkend='vidioc-g-jpegcomp'><constant>VIDIOC_G_JPEGCOMP</constant></link>">
-<!ENTITY VIDIOC-G-MPEGCOMP "<link linkend=''><constant>VIDIOC_G_MPEGCOMP</constant></link>">
-<!ENTITY VIDIOC-G-MODULATOR "<link linkend='vidioc-g-modulator'><constant>VIDIOC_G_MODULATOR</constant></link>">
-<!ENTITY VIDIOC-G-OUTPUT "<link linkend='vidioc-g-output'><constant>VIDIOC_G_OUTPUT</constant></link>">
-<!ENTITY VIDIOC-G-PARM "<link linkend='vidioc-g-parm'><constant>VIDIOC_G_PARM</constant></link>">
-<!ENTITY VIDIOC-G-PRIORITY "<link linkend='vidioc-g-priority'><constant>VIDIOC_G_PRIORITY</constant></link>">
-<!ENTITY VIDIOC-G-SLICED-VBI-CAP "<link linkend='vidioc-g-sliced-vbi-cap'><constant>VIDIOC_G_SLICED_VBI_CAP</constant></link>">
-<!ENTITY VIDIOC-G-STD "<link linkend='vidioc-g-std'><constant>VIDIOC_G_STD</constant></link>">
-<!ENTITY VIDIOC-G-TUNER "<link linkend='vidioc-g-tuner'><constant>VIDIOC_G_TUNER</constant></link>">
-<!ENTITY VIDIOC-LOG-STATUS "<link linkend='vidioc-log-status'><constant>VIDIOC_LOG_STATUS</constant></link>">
-<!ENTITY VIDIOC-OVERLAY "<link linkend='vidioc-overlay'><constant>VIDIOC_OVERLAY</constant></link>">
-<!ENTITY VIDIOC-QBUF "<link linkend='vidioc-qbuf'><constant>VIDIOC_QBUF</constant></link>">
-<!ENTITY VIDIOC-QUERYBUF "<link linkend='vidioc-querybuf'><constant>VIDIOC_QUERYBUF</constant></link>">
-<!ENTITY VIDIOC-QUERYCAP "<link linkend='vidioc-querycap'><constant>VIDIOC_QUERYCAP</constant></link>">
-<!ENTITY VIDIOC-QUERYCTRL "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYCTRL</constant></link>">
-<!ENTITY VIDIOC-QUERYMENU "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYMENU</constant></link>">
-<!ENTITY VIDIOC-QUERYSTD "<link linkend='vidioc-querystd'><constant>VIDIOC_QUERYSTD</constant></link>">
-<!ENTITY VIDIOC-QUERY-DV-PRESET "<link linkend='vidioc-query-dv-preset'><constant>VIDIOC_QUERY_DV_PRESET</constant></link>">
-<!ENTITY VIDIOC-REQBUFS "<link linkend='vidioc-reqbufs'><constant>VIDIOC_REQBUFS</constant></link>">
-<!ENTITY VIDIOC-STREAMOFF "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMOFF</constant></link>">
-<!ENTITY VIDIOC-STREAMON "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMON</constant></link>">
-<!ENTITY VIDIOC-SUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_SUBSCRIBE_EVENT</constant></link>">
-<!ENTITY VIDIOC-S-AUDIO "<link linkend='vidioc-g-audio'><constant>VIDIOC_S_AUDIO</constant></link>">
-<!ENTITY VIDIOC-S-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_S_AUDOUT</constant></link>">
-<!ENTITY VIDIOC-S-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_S_CROP</constant></link>">
-<!ENTITY VIDIOC-S-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_S_CTRL</constant></link>">
-<!ENTITY VIDIOC-S-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_S_DV_PRESET</constant></link>">
-<!ENTITY VIDIOC-S-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_S_DV_TIMINGS</constant></link>">
-<!ENTITY VIDIOC-S-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_S_EXT_CTRLS</constant></link>">
-<!ENTITY VIDIOC-S-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_S_FBUF</constant></link>">
-<!ENTITY VIDIOC-S-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_S_FMT</constant></link>">
-<!ENTITY VIDIOC-S-FREQUENCY "<link linkend='vidioc-g-frequency'><constant>VIDIOC_S_FREQUENCY</constant></link>">
-<!ENTITY VIDIOC-S-HW-FREQ-SEEK "<link linkend='vidioc-s-hw-freq-seek'><constant>VIDIOC_S_HW_FREQ_SEEK</constant></link>">
-<!ENTITY VIDIOC-S-INPUT "<link linkend='vidioc-g-input'><constant>VIDIOC_S_INPUT</constant></link>">
-<!ENTITY VIDIOC-S-JPEGCOMP "<link linkend='vidioc-g-jpegcomp'><constant>VIDIOC_S_JPEGCOMP</constant></link>">
-<!ENTITY VIDIOC-S-MPEGCOMP "<link linkend=''><constant>VIDIOC_S_MPEGCOMP</constant></link>">
-<!ENTITY VIDIOC-S-MODULATOR "<link linkend='vidioc-g-modulator'><constant>VIDIOC_S_MODULATOR</constant></link>">
-<!ENTITY VIDIOC-S-OUTPUT "<link linkend='vidioc-g-output'><constant>VIDIOC_S_OUTPUT</constant></link>">
-<!ENTITY VIDIOC-S-PARM "<link linkend='vidioc-g-parm'><constant>VIDIOC_S_PARM</constant></link>">
-<!ENTITY VIDIOC-S-PRIORITY "<link linkend='vidioc-g-priority'><constant>VIDIOC_S_PRIORITY</constant></link>">
-<!ENTITY VIDIOC-S-STD "<link linkend='vidioc-g-std'><constant>VIDIOC_S_STD</constant></link>">
-<!ENTITY VIDIOC-S-TUNER "<link linkend='vidioc-g-tuner'><constant>VIDIOC_S_TUNER</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-ENUM-FRAME-SIZE "<link linkend='vidioc-subdev-enum-frame-size'><constant>VIDIOC_SUBDEV_ENUM_FRAME_SIZE</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-ENUM-MBUS-CODE "<link linkend='vidioc-subdev-enum-mbus-code'><constant>VIDIOC_SUBDEV_ENUM_MBUS_CODE</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-G-CROP "<link linkend='vidioc-subdev-g-crop'><constant>VIDIOC_SUBDEV_G_CROP</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-G-FMT "<link linkend='vidioc-subdev-g-fmt'><constant>VIDIOC_SUBDEV_G_FMT</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-G-FRAME-INTERVAL "<link linkend='vidioc-subdev-g-frame-interval'><constant>VIDIOC_SUBDEV_G_FRAME_INTERVAL</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-S-CROP "<link linkend='vidioc-subdev-g-crop'><constant>VIDIOC_SUBDEV_S_CROP</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-S-FMT "<link linkend='vidioc-subdev-g-fmt'><constant>VIDIOC_SUBDEV_S_FMT</constant></link>">
-<!ENTITY VIDIOC-SUBDEV-S-FRAME-INTERVAL "<link linkend='vidioc-subdev-g-frame-interval'><constant>VIDIOC_SUBDEV_S_FRAME_INTERVAL</constant></link>">
-<!ENTITY VIDIOC-TRY-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_TRY_ENCODER_CMD</constant></link>">
-<!ENTITY VIDIOC-TRY-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_TRY_EXT_CTRLS</constant></link>">
-<!ENTITY VIDIOC-TRY-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_TRY_FMT</constant></link>">
-<!ENTITY VIDIOC-UNSUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_UNSUBSCRIBE_EVENT</constant></link>">
-
-<!ENTITY MEDIA-IOC-DEVICE-INFO "<link linkend='media-ioc-device-info'><constant>MEDIA_IOC_DEVICE_INFO</constant></link>">
-<!ENTITY MEDIA-IOC-ENUM-ENTITIES "<link linkend='media-ioc-enum-entities'><constant>MEDIA_IOC_ENUM_ENTITIES</constant></link>">
-<!ENTITY MEDIA-IOC-ENUM-LINKS "<link linkend='media-ioc-enum-links'><constant>MEDIA_IOC_ENUM_LINKS</constant></link>">
-<!ENTITY MEDIA-IOC-SETUP-LINK "<link linkend='media-ioc-setup-link'><constant>MEDIA_IOC_SETUP_LINK</constant></link>">
-
-<!-- Types -->
-<!ENTITY v4l2-std-id "<link linkend='v4l2-std-id'>v4l2_std_id</link>">
-
-<!-- Enums -->
-<!ENTITY v4l2-buf-type "enum&nbsp;<link linkend='v4l2-buf-type'>v4l2_buf_type</link>">
-<!ENTITY v4l2-colorspace "enum&nbsp;<link linkend='v4l2-colorspace'>v4l2_colorspace</link>">
-<!ENTITY v4l2-ctrl-type "enum&nbsp;<link linkend='v4l2-ctrl-type'>v4l2_ctrl_type</link>">
-<!ENTITY v4l2-exposure-auto-type "enum&nbsp;<link linkend='v4l2-exposure-auto-type'>v4l2_exposure_auto_type</link>">
-<!ENTITY v4l2-field "enum&nbsp;<link linkend='v4l2-field'>v4l2_field</link>">
-<!ENTITY v4l2-frmivaltypes "enum&nbsp;<link linkend='v4l2-frmivaltypes'>v4l2_frmivaltypes</link>">
-<!ENTITY v4l2-frmsizetypes "enum&nbsp;<link linkend='v4l2-frmsizetypes'>v4l2_frmsizetypes</link>">
-<!ENTITY v4l2-mbus-pixelcode "enum&nbsp;<link linkend='v4l2-mbus-pixelcode'>v4l2_mbus_pixelcode</link>">
-<!ENTITY v4l2-memory "enum&nbsp;<link linkend='v4l2-memory'>v4l2_memory</link>">
-<!ENTITY v4l2-mpeg-audio-ac3-bitrate "enum&nbsp;<link linkend='v4l2-mpeg-audio-ac3-bitrate'>v4l2_mpeg_audio_ac3_bitrate</link>">
-<!ENTITY v4l2-mpeg-audio-crc "enum&nbsp;<link linkend='v4l2-mpeg-audio-crc'>v4l2_mpeg_audio_crc</link>">
-<!ENTITY v4l2-mpeg-audio-emphasis "enum&nbsp;<link linkend='v4l2-mpeg-audio-emphasis'>v4l2_mpeg_audio_emphasis</link>">
-<!ENTITY v4l2-mpeg-audio-encoding "enum&nbsp;<link linkend='v4l2-mpeg-audio-encoding'>v4l2_mpeg_audio_encoding</link>">
-<!ENTITY v4l2-mpeg-audio-l1-bitrate "enum&nbsp;<link linkend='v4l2-mpeg-audio-l1-bitrate'>v4l2_mpeg_audio_l1_bitrate</link>">
-<!ENTITY v4l2-mpeg-audio-l2-bitrate "enum&nbsp;<link linkend='v4l2-mpeg-audio-l2-bitrate'>v4l2_mpeg_audio_l2_bitrate</link>">
-<!ENTITY v4l2-mpeg-audio-l3-bitrate "enum&nbsp;<link linkend='v4l2-mpeg-audio-l3-bitrate'>v4l2_mpeg_audio_l3_bitrate</link>">
-<!ENTITY v4l2-mpeg-audio-mode "enum&nbsp;<link linkend='v4l2-mpeg-audio-mode'>v4l2_mpeg_audio_mode</link>">
-<!ENTITY v4l2-mpeg-audio-mode-extension "enum&nbsp;<link linkend='v4l2-mpeg-audio-mode-extension'>v4l2_mpeg_audio_mode_extension</link>">
-<!ENTITY v4l2-mpeg-audio-sampling-freq "enum&nbsp;<link linkend='v4l2-mpeg-audio-sampling-freq'>v4l2_mpeg_audio_sampling_freq</link>">
-<!ENTITY chroma-spatial-filter-type "enum&nbsp;<link linkend='chroma-spatial-filter-type'>v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type</link>">
-<!ENTITY luma-spatial-filter-type "enum&nbsp;<link linkend='luma-spatial-filter-type'>v4l2_mpeg_cx2341x_video_luma_spatial_filter_type</link>">
-<!ENTITY v4l2-mpeg-cx2341x-video-median-filter-type "enum&nbsp;<link linkend='v4l2-mpeg-cx2341x-video-median-filter-type'>v4l2_mpeg_cx2341x_video_median_filter_type</link>">
-<!ENTITY v4l2-mpeg-cx2341x-video-spatial-filter-mode "enum&nbsp;<link linkend='v4l2-mpeg-cx2341x-video-spatial-filter-mode'>v4l2_mpeg_cx2341x_video_spatial_filter_mode</link>">
-<!ENTITY v4l2-mpeg-cx2341x-video-temporal-filter-mode "enum&nbsp;<link linkend='v4l2-mpeg-cx2341x-video-temporal-filter-mode'>v4l2_mpeg_cx2341x_video_temporal_filter_mode</link>">
-<!ENTITY v4l2-mpeg-stream-type "enum&nbsp;<link linkend='v4l2-mpeg-stream-type'>v4l2_mpeg_stream_type</link>">
-<!ENTITY v4l2-mpeg-stream-vbi-fmt "enum&nbsp;<link linkend='v4l2-mpeg-stream-vbi-fmt'>v4l2_mpeg_stream_vbi_fmt</link>">
-<!ENTITY v4l2-mpeg-video-aspect "enum&nbsp;<link linkend='v4l2-mpeg-video-aspect'>v4l2_mpeg_video_aspect</link>">
-<!ENTITY v4l2-mpeg-video-bitrate-mode "enum&nbsp;<link linkend='v4l2-mpeg-video-bitrate-mode'>v4l2_mpeg_video_bitrate_mode</link>">
-<!ENTITY v4l2-mpeg-video-encoding "enum&nbsp;<link linkend='v4l2-mpeg-video-encoding'>v4l2_mpeg_video_encoding</link>">
-<!ENTITY v4l2-power-line-frequency "enum&nbsp;<link linkend='v4l2-power-line-frequency'>v4l2_power_line_frequency</link>">
-<!ENTITY v4l2-priority "enum&nbsp;<link linkend='v4l2-priority'>v4l2_priority</link>">
-<!ENTITY v4l2-subdev-format-whence "enum&nbsp;<link linkend='v4l2-subdev-format-whence'>v4l2_subdev_format_whence</link>">
-<!ENTITY v4l2-tuner-type "enum&nbsp;<link linkend='v4l2-tuner-type'>v4l2_tuner_type</link>">
-<!ENTITY v4l2-preemphasis "enum&nbsp;<link linkend='v4l2-preemphasis'>v4l2_preemphasis</link>">
-
-<!-- Structures -->
-<!ENTITY v4l2-audio "struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link>">
-<!ENTITY v4l2-audioout "struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link>">
-<!ENTITY v4l2-bt-timings "struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link>">
-<!ENTITY v4l2-buffer "struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link>">
-<!ENTITY v4l2-plane "struct&nbsp;<link linkend='v4l2-plane'>v4l2_plane</link>">
-<!ENTITY v4l2-capability "struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link>">
-<!ENTITY v4l2-captureparm "struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link>">
-<!ENTITY v4l2-clip "struct&nbsp;<link linkend='v4l2-clip'>v4l2_clip</link>">
-<!ENTITY v4l2-control "struct&nbsp;<link linkend='v4l2-control'>v4l2_control</link>">
-<!ENTITY v4l2-crop "struct&nbsp;<link linkend='v4l2-crop'>v4l2_crop</link>">
-<!ENTITY v4l2-cropcap "struct&nbsp;<link linkend='v4l2-cropcap'>v4l2_cropcap</link>">
-<!ENTITY v4l2-dbg-chip-ident "struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link>">
-<!ENTITY v4l2-dbg-match "struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link>">
-<!ENTITY v4l2-dbg-register "struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link>">
-<!ENTITY v4l2-dv-enum-preset "struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link>">
-<!ENTITY v4l2-dv-preset "struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link>">
-<!ENTITY v4l2-dv-timings "struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link>">
-<!ENTITY v4l2-enc-idx "struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link>">
-<!ENTITY v4l2-enc-idx-entry "struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link>">
-<!ENTITY v4l2-encoder-cmd "struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link>">
-<!ENTITY v4l2-event "struct&nbsp;<link linkend='v4l2-event'>v4l2_event</link>">
-<!ENTITY v4l2-event-subscription "struct&nbsp;<link linkend='v4l2-event-subscription'>v4l2_event_subscription</link>">
-<!ENTITY v4l2-event-vsync "struct&nbsp;<link linkend='v4l2-event-vsync'>v4l2_event_vsync</link>">
-<!ENTITY v4l2-ext-control "struct&nbsp;<link linkend='v4l2-ext-control'>v4l2_ext_control</link>">
-<!ENTITY v4l2-ext-controls "struct&nbsp;<link linkend='v4l2-ext-controls'>v4l2_ext_controls</link>">
-<!ENTITY v4l2-fmtdesc "struct&nbsp;<link linkend='v4l2-fmtdesc'>v4l2_fmtdesc</link>">
-<!ENTITY v4l2-format "struct&nbsp;<link linkend='v4l2-format'>v4l2_format</link>">
-<!ENTITY v4l2-fract "struct&nbsp;<link linkend='v4l2-fract'>v4l2_fract</link>">
-<!ENTITY v4l2-framebuffer "struct&nbsp;<link linkend='v4l2-framebuffer'>v4l2_framebuffer</link>">
-<!ENTITY v4l2-frequency "struct&nbsp;<link linkend='v4l2-frequency'>v4l2_frequency</link>">
-<!ENTITY v4l2-frmival-stepwise "struct&nbsp;<link linkend='v4l2-frmival-stepwise'>v4l2_frmival_stepwise</link>">
-<!ENTITY v4l2-frmivalenum "struct&nbsp;<link linkend='v4l2-frmivalenum'>v4l2_frmivalenum</link>">
-<!ENTITY v4l2-frmsize-discrete "struct&nbsp;<link linkend='v4l2-frmsize-discrete'>v4l2_frmsize_discrete</link>">
-<!ENTITY v4l2-frmsize-stepwise "struct&nbsp;<link linkend='v4l2-frmsize-stepwise'>v4l2_frmsize_stepwise</link>">
-<!ENTITY v4l2-frmsizeenum "struct&nbsp;<link linkend='v4l2-frmsizeenum'>v4l2_frmsizeenum</link>">
-<!ENTITY v4l2-hw-freq-seek "struct&nbsp;<link linkend='v4l2-hw-freq-seek'>v4l2_hw_freq_seek</link>">
-<!ENTITY v4l2-input "struct&nbsp;<link linkend='v4l2-input'>v4l2_input</link>">
-<!ENTITY v4l2-jpegcompression "struct&nbsp;<link linkend='v4l2-jpegcompression'>v4l2_jpegcompression</link>">
-<!ENTITY v4l2-mbus-framefmt "struct&nbsp;<link linkend='v4l2-mbus-framefmt'>v4l2_mbus_framefmt</link>">
-<!ENTITY v4l2-modulator "struct&nbsp;<link linkend='v4l2-modulator'>v4l2_modulator</link>">
-<!ENTITY v4l2-mpeg-vbi-fmt-ivtv "struct&nbsp;<link linkend='v4l2-mpeg-vbi-fmt-ivtv'>v4l2_mpeg_vbi_fmt_ivtv</link>">
-<!ENTITY v4l2-output "struct&nbsp;<link linkend='v4l2-output'>v4l2_output</link>">
-<!ENTITY v4l2-outputparm "struct&nbsp;<link linkend='v4l2-outputparm'>v4l2_outputparm</link>">
-<!ENTITY v4l2-pix-format "struct&nbsp;<link linkend='v4l2-pix-format'>v4l2_pix_format</link>">
-<!ENTITY v4l2-pix-format-mplane "struct&nbsp;<link linkend='v4l2-pix-format-mplane'>v4l2_pix_format_mplane</link>">
-<!ENTITY v4l2-plane-pix-format "struct&nbsp;<link linkend='v4l2-plane-pix-format'>v4l2_plane_pix_format</link>">
-<!ENTITY v4l2-queryctrl "struct&nbsp;<link linkend='v4l2-queryctrl'>v4l2_queryctrl</link>">
-<!ENTITY v4l2-querymenu "struct&nbsp;<link linkend='v4l2-querymenu'>v4l2_querymenu</link>">
-<!ENTITY v4l2-rect "struct&nbsp;<link linkend='v4l2-rect'>v4l2_rect</link>">
-<!ENTITY v4l2-requestbuffers "struct&nbsp;<link linkend='v4l2-requestbuffers'>v4l2_requestbuffers</link>">
-<!ENTITY v4l2-sliced-vbi-cap "struct&nbsp;<link linkend='v4l2-sliced-vbi-cap'>v4l2_sliced_vbi_cap</link>">
-<!ENTITY v4l2-sliced-vbi-data "struct&nbsp;<link linkend='v4l2-sliced-vbi-data'>v4l2_sliced_vbi_data</link>">
-<!ENTITY v4l2-sliced-vbi-format "struct&nbsp;<link linkend='v4l2-sliced-vbi-format'>v4l2_sliced_vbi_format</link>">
-<!ENTITY v4l2-subdev-frame-interval "struct&nbsp;<link linkend='v4l2-subdev-frame-interval'>v4l2_subdev_frame_interval</link>">
-<!ENTITY v4l2-subdev-frame-interval-enum "struct&nbsp;<link linkend='v4l2-subdev-frame-interval-enum'>v4l2_subdev_frame_interval_enum</link>">
-<!ENTITY v4l2-subdev-frame-size-enum "struct&nbsp;<link linkend='v4l2-subdev-frame-size-enum'>v4l2_subdev_frame_size_enum</link>">
-<!ENTITY v4l2-subdev-crop "struct&nbsp;<link linkend='v4l2-subdev-crop'>v4l2_subdev_crop</link>">
-<!ENTITY v4l2-subdev-format "struct&nbsp;<link linkend='v4l2-subdev-format'>v4l2_subdev_format</link>">
-<!ENTITY v4l2-subdev-mbus-code-enum "struct&nbsp;<link linkend='v4l2-subdev-mbus-code-enum'>v4l2_subdev_mbus_code_enum</link>">
-<!ENTITY v4l2-standard "struct&nbsp;<link linkend='v4l2-standard'>v4l2_standard</link>">
-<!ENTITY v4l2-streamparm "struct&nbsp;<link linkend='v4l2-streamparm'>v4l2_streamparm</link>">
-<!ENTITY v4l2-timecode "struct&nbsp;<link linkend='v4l2-timecode'>v4l2_timecode</link>">
-<!ENTITY v4l2-tuner "struct&nbsp;<link linkend='v4l2-tuner'>v4l2_tuner</link>">
-<!ENTITY v4l2-vbi-format "struct&nbsp;<link linkend='v4l2-vbi-format'>v4l2_vbi_format</link>">
-<!ENTITY v4l2-window "struct&nbsp;<link linkend='v4l2-window'>v4l2_window</link>">
-
-<!ENTITY media-device-info "struct&nbsp;<link linkend='media-device-info'>media_device_info</link>">
-<!ENTITY media-entity-desc "struct&nbsp;<link linkend='media-entity-desc'>media_entity_desc</link>">
-<!ENTITY media-links-enum "struct&nbsp;<link linkend='media-links-enum'>media_links_enum</link>">
-<!ENTITY media-pad-desc "struct&nbsp;<link linkend='media-pad-desc'>media_pad_desc</link>">
-<!ENTITY media-link-desc "struct&nbsp;<link linkend='media-link-desc'>media_link_desc</link>">
-
-<!-- Error Codes -->
-<!ENTITY EACCES "<errorcode>EACCES</errorcode> error code">
-<!ENTITY EAGAIN "<errorcode>EAGAIN</errorcode> error code">
-<!ENTITY EBADF "<errorcode>EBADF</errorcode> error code">
-<!ENTITY EBUSY "<errorcode>EBUSY</errorcode> error code">
-<!ENTITY EFAULT "<errorcode>EFAULT</errorcode> error code">
-<!ENTITY EIO "<errorcode>EIO</errorcode> error code">
-<!ENTITY EINTR "<errorcode>EINTR</errorcode> error code">
-<!ENTITY EINVAL "<errorcode>EINVAL</errorcode> error code">
-<!ENTITY ENFILE "<errorcode>ENFILE</errorcode> error code">
-<!ENTITY ENOMEM "<errorcode>ENOMEM</errorcode> error code">
-<!ENTITY ENOSPC "<errorcode>ENOSPC</errorcode> error code">
-<!ENTITY ENOTTY "<errorcode>ENOTTY</errorcode> error code">
-<!ENTITY ENXIO "<errorcode>ENXIO</errorcode> error code">
-<!ENTITY EMFILE "<errorcode>EMFILE</errorcode> error code">
-<!ENTITY EPERM "<errorcode>EPERM</errorcode> error code">
-<!ENTITY EPIPE "<errorcode>EPIPE</errorcode> error code">
-<!ENTITY ERANGE "<errorcode>ERANGE</errorcode> error code">
-
-<!-- Subsections -->
-<!ENTITY sub-biblio SYSTEM "v4l/biblio.xml">
-<!ENTITY sub-common SYSTEM "v4l/common.xml">
-<!ENTITY sub-planar-apis SYSTEM "v4l/planar-apis.xml">
-<!ENTITY sub-compat SYSTEM "v4l/compat.xml">
-<!ENTITY sub-controls SYSTEM "v4l/controls.xml">
-<!ENTITY sub-dev-capture SYSTEM "v4l/dev-capture.xml">
-<!ENTITY sub-dev-codec SYSTEM "v4l/dev-codec.xml">
-<!ENTITY sub-dev-event SYSTEM "v4l/dev-event.xml">
-<!ENTITY sub-dev-effect SYSTEM "v4l/dev-effect.xml">
-<!ENTITY sub-dev-osd SYSTEM "v4l/dev-osd.xml">
-<!ENTITY sub-dev-output SYSTEM "v4l/dev-output.xml">
-<!ENTITY sub-dev-overlay SYSTEM "v4l/dev-overlay.xml">
-<!ENTITY sub-dev-radio SYSTEM "v4l/dev-radio.xml">
-<!ENTITY sub-dev-raw-vbi SYSTEM "v4l/dev-raw-vbi.xml">
-<!ENTITY sub-dev-rds SYSTEM "v4l/dev-rds.xml">
-<!ENTITY sub-dev-sliced-vbi SYSTEM "v4l/dev-sliced-vbi.xml">
-<!ENTITY sub-dev-subdev SYSTEM "v4l/dev-subdev.xml">
-<!ENTITY sub-dev-teletext SYSTEM "v4l/dev-teletext.xml">
-<!ENTITY sub-driver SYSTEM "v4l/driver.xml">
-<!ENTITY sub-libv4l SYSTEM "v4l/libv4l.xml">
-<!ENTITY sub-lirc_device_interface SYSTEM "v4l/lirc_device_interface.xml">
-<!ENTITY sub-remote_controllers SYSTEM "v4l/remote_controllers.xml">
-<!ENTITY sub-fdl-appendix SYSTEM "v4l/fdl-appendix.xml">
-<!ENTITY sub-close SYSTEM "v4l/func-close.xml">
-<!ENTITY sub-ioctl SYSTEM "v4l/func-ioctl.xml">
-<!ENTITY sub-mmap SYSTEM "v4l/func-mmap.xml">
-<!ENTITY sub-munmap SYSTEM "v4l/func-munmap.xml">
-<!ENTITY sub-open SYSTEM "v4l/func-open.xml">
-<!ENTITY sub-poll SYSTEM "v4l/func-poll.xml">
-<!ENTITY sub-read SYSTEM "v4l/func-read.xml">
-<!ENTITY sub-select SYSTEM "v4l/func-select.xml">
-<!ENTITY sub-write SYSTEM "v4l/func-write.xml">
-<!ENTITY sub-io SYSTEM "v4l/io.xml">
-<!ENTITY sub-grey SYSTEM "v4l/pixfmt-grey.xml">
-<!ENTITY sub-m420 SYSTEM "v4l/pixfmt-m420.xml">
-<!ENTITY sub-nv12 SYSTEM "v4l/pixfmt-nv12.xml">
-<!ENTITY sub-nv12m SYSTEM "v4l/pixfmt-nv12m.xml">
-<!ENTITY sub-nv12mt SYSTEM "v4l/pixfmt-nv12mt.xml">
-<!ENTITY sub-nv16 SYSTEM "v4l/pixfmt-nv16.xml">
-<!ENTITY sub-packed-rgb SYSTEM "v4l/pixfmt-packed-rgb.xml">
-<!ENTITY sub-packed-yuv SYSTEM "v4l/pixfmt-packed-yuv.xml">
-<!ENTITY sub-sbggr16 SYSTEM "v4l/pixfmt-sbggr16.xml">
-<!ENTITY sub-sbggr8 SYSTEM "v4l/pixfmt-sbggr8.xml">
-<!ENTITY sub-sgbrg8 SYSTEM "v4l/pixfmt-sgbrg8.xml">
-<!ENTITY sub-sgrbg8 SYSTEM "v4l/pixfmt-sgrbg8.xml">
-<!ENTITY sub-uyvy SYSTEM "v4l/pixfmt-uyvy.xml">
-<!ENTITY sub-vyuy SYSTEM "v4l/pixfmt-vyuy.xml">
-<!ENTITY sub-y16 SYSTEM "v4l/pixfmt-y16.xml">
-<!ENTITY sub-y41p SYSTEM "v4l/pixfmt-y41p.xml">
-<!ENTITY sub-yuv410 SYSTEM "v4l/pixfmt-yuv410.xml">
-<!ENTITY sub-yuv411p SYSTEM "v4l/pixfmt-yuv411p.xml">
-<!ENTITY sub-yuv420 SYSTEM "v4l/pixfmt-yuv420.xml">
-<!ENTITY sub-yuv420m SYSTEM "v4l/pixfmt-yuv420m.xml">
-<!ENTITY sub-yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml">
-<!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
-<!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
-<!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
-<!ENTITY sub-srggb12 SYSTEM "v4l/pixfmt-srggb12.xml">
-<!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
-<!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
-<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
-<!ENTITY sub-y10b SYSTEM "v4l/pixfmt-y10b.xml">
-<!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
-<!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
-<!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
-<!ENTITY sub-encoder-cmd SYSTEM "v4l/vidioc-encoder-cmd.xml">
-<!ENTITY sub-enum-fmt SYSTEM "v4l/vidioc-enum-fmt.xml">
-<!ENTITY sub-enum-frameintervals SYSTEM "v4l/vidioc-enum-frameintervals.xml">
-<!ENTITY sub-enum-framesizes SYSTEM "v4l/vidioc-enum-framesizes.xml">
-<!ENTITY sub-enumaudio SYSTEM "v4l/vidioc-enumaudio.xml">
-<!ENTITY sub-enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
-<!ENTITY sub-enuminput SYSTEM "v4l/vidioc-enuminput.xml">
-<!ENTITY sub-enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
-<!ENTITY sub-enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
-<!ENTITY sub-g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
-<!ENTITY sub-query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
-<!ENTITY sub-g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
-<!ENTITY sub-enumstd SYSTEM "v4l/vidioc-enumstd.xml">
-<!ENTITY sub-g-audio SYSTEM "v4l/vidioc-g-audio.xml">
-<!ENTITY sub-g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
-<!ENTITY sub-dbg-g-chip-ident SYSTEM "v4l/vidioc-dbg-g-chip-ident.xml">
-<!ENTITY sub-g-crop SYSTEM "v4l/vidioc-g-crop.xml">
-<!ENTITY sub-g-ctrl SYSTEM "v4l/vidioc-g-ctrl.xml">
-<!ENTITY sub-g-enc-index SYSTEM "v4l/vidioc-g-enc-index.xml">
-<!ENTITY sub-g-ext-ctrls SYSTEM "v4l/vidioc-g-ext-ctrls.xml">
-<!ENTITY sub-g-fbuf SYSTEM "v4l/vidioc-g-fbuf.xml">
-<!ENTITY sub-g-fmt SYSTEM "v4l/vidioc-g-fmt.xml">
-<!ENTITY sub-g-frequency SYSTEM "v4l/vidioc-g-frequency.xml">
-<!ENTITY sub-g-input SYSTEM "v4l/vidioc-g-input.xml">
-<!ENTITY sub-g-jpegcomp SYSTEM "v4l/vidioc-g-jpegcomp.xml">
-<!ENTITY sub-g-modulator SYSTEM "v4l/vidioc-g-modulator.xml">
-<!ENTITY sub-g-output SYSTEM "v4l/vidioc-g-output.xml">
-<!ENTITY sub-g-parm SYSTEM "v4l/vidioc-g-parm.xml">
-<!ENTITY sub-g-priority SYSTEM "v4l/vidioc-g-priority.xml">
-<!ENTITY sub-g-sliced-vbi-cap SYSTEM "v4l/vidioc-g-sliced-vbi-cap.xml">
-<!ENTITY sub-g-std SYSTEM "v4l/vidioc-g-std.xml">
-<!ENTITY sub-g-tuner SYSTEM "v4l/vidioc-g-tuner.xml">
-<!ENTITY sub-log-status SYSTEM "v4l/vidioc-log-status.xml">
-<!ENTITY sub-overlay SYSTEM "v4l/vidioc-overlay.xml">
-<!ENTITY sub-qbuf SYSTEM "v4l/vidioc-qbuf.xml">
-<!ENTITY sub-querybuf SYSTEM "v4l/vidioc-querybuf.xml">
-<!ENTITY sub-querycap SYSTEM "v4l/vidioc-querycap.xml">
-<!ENTITY sub-queryctrl SYSTEM "v4l/vidioc-queryctrl.xml">
-<!ENTITY sub-querystd SYSTEM "v4l/vidioc-querystd.xml">
-<!ENTITY sub-reqbufs SYSTEM "v4l/vidioc-reqbufs.xml">
-<!ENTITY sub-s-hw-freq-seek SYSTEM "v4l/vidioc-s-hw-freq-seek.xml">
-<!ENTITY sub-streamon SYSTEM "v4l/vidioc-streamon.xml">
-<!ENTITY sub-subdev-enum-frame-interval SYSTEM "v4l/vidioc-subdev-enum-frame-interval.xml">
-<!ENTITY sub-subdev-enum-frame-size SYSTEM "v4l/vidioc-subdev-enum-frame-size.xml">
-<!ENTITY sub-subdev-enum-mbus-code SYSTEM "v4l/vidioc-subdev-enum-mbus-code.xml">
-<!ENTITY sub-subdev-formats SYSTEM "v4l/subdev-formats.xml">
-<!ENTITY sub-subdev-g-crop SYSTEM "v4l/vidioc-subdev-g-crop.xml">
-<!ENTITY sub-subdev-g-fmt SYSTEM "v4l/vidioc-subdev-g-fmt.xml">
-<!ENTITY sub-subdev-g-frame-interval SYSTEM "v4l/vidioc-subdev-g-frame-interval.xml">
-<!ENTITY sub-capture-c SYSTEM "v4l/capture.c.xml">
-<!ENTITY sub-keytable-c SYSTEM "v4l/keytable.c.xml">
-<!ENTITY sub-v4l2grab-c SYSTEM "v4l/v4l2grab.c.xml">
-<!ENTITY sub-videodev2-h SYSTEM "v4l/videodev2.h.xml">
-<!ENTITY sub-v4l2 SYSTEM "v4l/v4l2.xml">
-<!ENTITY sub-dqevent SYSTEM "v4l/vidioc-dqevent.xml">
-<!ENTITY sub-subscribe-event SYSTEM "v4l/vidioc-subscribe-event.xml">
-<!ENTITY sub-intro SYSTEM "dvb/intro.xml">
-<!ENTITY sub-frontend SYSTEM "dvb/frontend.xml">
-<!ENTITY sub-dvbproperty SYSTEM "dvb/dvbproperty.xml">
-<!ENTITY sub-demux SYSTEM "dvb/demux.xml">
-<!ENTITY sub-video SYSTEM "dvb/video.xml">
-<!ENTITY sub-audio SYSTEM "dvb/audio.xml">
-<!ENTITY sub-ca SYSTEM "dvb/ca.xml">
-<!ENTITY sub-net SYSTEM "dvb/net.xml">
-<!ENTITY sub-kdapi SYSTEM "dvb/kdapi.xml">
-<!ENTITY sub-examples SYSTEM "dvb/examples.xml">
-<!ENTITY sub-frontend-h SYSTEM "dvb/frontend.h.xml">
-<!ENTITY sub-dvbapi SYSTEM "dvb/dvbapi.xml">
-<!ENTITY sub-media SYSTEM "media.xml">
-<!ENTITY sub-media-entities SYSTEM "media-entities.tmpl">
-<!ENTITY sub-media-indices SYSTEM "media-indices.tmpl">
-
-<!ENTITY sub-media-controller SYSTEM "v4l/media-controller.xml">
-<!ENTITY sub-media-func-open SYSTEM "v4l/media-func-open.xml">
-<!ENTITY sub-media-func-close SYSTEM "v4l/media-func-close.xml">
-<!ENTITY sub-media-func-ioctl SYSTEM "v4l/media-func-ioctl.xml">
-<!ENTITY sub-media-ioc-device-info SYSTEM "v4l/media-ioc-device-info.xml">
-<!ENTITY sub-media-ioc-enum-entities SYSTEM "v4l/media-ioc-enum-entities.xml">
-<!ENTITY sub-media-ioc-enum-links SYSTEM "v4l/media-ioc-enum-links.xml">
-<!ENTITY sub-media-ioc-setup-link SYSTEM "v4l/media-ioc-setup-link.xml">
-
-<!-- Function Reference -->
-<!ENTITY close SYSTEM "v4l/func-close.xml">
-<!ENTITY ioctl SYSTEM "v4l/func-ioctl.xml">
-<!ENTITY mmap SYSTEM "v4l/func-mmap.xml">
-<!ENTITY munmap SYSTEM "v4l/func-munmap.xml">
-<!ENTITY open SYSTEM "v4l/func-open.xml">
-<!ENTITY poll SYSTEM "v4l/func-poll.xml">
-<!ENTITY read SYSTEM "v4l/func-read.xml">
-<!ENTITY select SYSTEM "v4l/func-select.xml">
-<!ENTITY write SYSTEM "v4l/func-write.xml">
-<!ENTITY grey SYSTEM "v4l/pixfmt-grey.xml">
-<!ENTITY nv12 SYSTEM "v4l/pixfmt-nv12.xml">
-<!ENTITY nv12m SYSTEM "v4l/pixfmt-nv12m.xml">
-<!ENTITY nv16 SYSTEM "v4l/pixfmt-nv16.xml">
-<!ENTITY packed-rgb SYSTEM "v4l/pixfmt-packed-rgb.xml">
-<!ENTITY packed-yuv SYSTEM "v4l/pixfmt-packed-yuv.xml">
-<!ENTITY sbggr16 SYSTEM "v4l/pixfmt-sbggr16.xml">
-<!ENTITY sbggr8 SYSTEM "v4l/pixfmt-sbggr8.xml">
-<!ENTITY sgbrg8 SYSTEM "v4l/pixfmt-sgbrg8.xml">
-<!ENTITY sgrbg8 SYSTEM "v4l/pixfmt-sgrbg8.xml">
-<!ENTITY uyvy SYSTEM "v4l/pixfmt-uyvy.xml">
-<!ENTITY vyuy SYSTEM "v4l/pixfmt-vyuy.xml">
-<!ENTITY y16 SYSTEM "v4l/pixfmt-y16.xml">
-<!ENTITY y41p SYSTEM "v4l/pixfmt-y41p.xml">
-<!ENTITY yuv410 SYSTEM "v4l/pixfmt-yuv410.xml">
-<!ENTITY yuv411p SYSTEM "v4l/pixfmt-yuv411p.xml">
-<!ENTITY yuv420 SYSTEM "v4l/pixfmt-yuv420.xml">
-<!ENTITY yuv420m SYSTEM "v4l/pixfmt-yuv420m.xml">
-<!ENTITY yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml">
-<!ENTITY yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
-<!ENTITY yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
-<!ENTITY srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
-<!ENTITY srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
-<!ENTITY y10 SYSTEM "v4l/pixfmt-y10.xml">
-<!ENTITY cropcap SYSTEM "v4l/vidioc-cropcap.xml">
-<!ENTITY dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
-<!ENTITY encoder-cmd SYSTEM "v4l/vidioc-encoder-cmd.xml">
-<!ENTITY enum-fmt SYSTEM "v4l/vidioc-enum-fmt.xml">
-<!ENTITY enum-frameintervals SYSTEM "v4l/vidioc-enum-frameintervals.xml">
-<!ENTITY enum-framesizes SYSTEM "v4l/vidioc-enum-framesizes.xml">
-<!ENTITY enumaudio SYSTEM "v4l/vidioc-enumaudio.xml">
-<!ENTITY enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
-<!ENTITY enuminput SYSTEM "v4l/vidioc-enuminput.xml">
-<!ENTITY enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
-<!ENTITY enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
-<!ENTITY g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
-<!ENTITY query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
-<!ENTITY g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
-<!ENTITY enumstd SYSTEM "v4l/vidioc-enumstd.xml">
-<!ENTITY g-audio SYSTEM "v4l/vidioc-g-audio.xml">
-<!ENTITY g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
-<!ENTITY dbg-g-chip-ident SYSTEM "v4l/vidioc-dbg-g-chip-ident.xml">
-<!ENTITY g-crop SYSTEM "v4l/vidioc-g-crop.xml">
-<!ENTITY g-ctrl SYSTEM "v4l/vidioc-g-ctrl.xml">
-<!ENTITY g-enc-index SYSTEM "v4l/vidioc-g-enc-index.xml">
-<!ENTITY g-ext-ctrls SYSTEM "v4l/vidioc-g-ext-ctrls.xml">
-<!ENTITY g-fbuf SYSTEM "v4l/vidioc-g-fbuf.xml">
-<!ENTITY g-fmt SYSTEM "v4l/vidioc-g-fmt.xml">
-<!ENTITY g-frequency SYSTEM "v4l/vidioc-g-frequency.xml">
-<!ENTITY g-input SYSTEM "v4l/vidioc-g-input.xml">
-<!ENTITY g-jpegcomp SYSTEM "v4l/vidioc-g-jpegcomp.xml">
-<!ENTITY g-modulator SYSTEM "v4l/vidioc-g-modulator.xml">
-<!ENTITY g-output SYSTEM "v4l/vidioc-g-output.xml">
-<!ENTITY g-parm SYSTEM "v4l/vidioc-g-parm.xml">
-<!ENTITY g-priority SYSTEM "v4l/vidioc-g-priority.xml">
-<!ENTITY g-sliced-vbi-cap SYSTEM "v4l/vidioc-g-sliced-vbi-cap.xml">
-<!ENTITY g-std SYSTEM "v4l/vidioc-g-std.xml">
-<!ENTITY g-tuner SYSTEM "v4l/vidioc-g-tuner.xml">
-<!ENTITY log-status SYSTEM "v4l/vidioc-log-status.xml">
-<!ENTITY overlay SYSTEM "v4l/vidioc-overlay.xml">
-<!ENTITY qbuf SYSTEM "v4l/vidioc-qbuf.xml">
-<!ENTITY querybuf SYSTEM "v4l/vidioc-querybuf.xml">
-<!ENTITY querycap SYSTEM "v4l/vidioc-querycap.xml">
-<!ENTITY queryctrl SYSTEM "v4l/vidioc-queryctrl.xml">
-<!ENTITY querystd SYSTEM "v4l/vidioc-querystd.xml">
-<!ENTITY reqbufs SYSTEM "v4l/vidioc-reqbufs.xml">
-<!ENTITY s-hw-freq-seek SYSTEM "v4l/vidioc-s-hw-freq-seek.xml">
-<!ENTITY streamon SYSTEM "v4l/vidioc-streamon.xml">
-<!ENTITY dqevent SYSTEM "v4l/vidioc-dqevent.xml">
-<!ENTITY subscribe_event SYSTEM "v4l/vidioc-subscribe-event.xml">
diff --git a/Documentation/DocBook/media-indices.tmpl b/Documentation/DocBook/media-indices.tmpl
deleted file mode 100644
index 78d6031de00..00000000000
--- a/Documentation/DocBook/media-indices.tmpl
+++ /dev/null
@@ -1,89 +0,0 @@
-<!-- Generated file! Do not edit. -->
-
-<index><title>List of Types</title>
-<indexentry><primaryie><link linkend='v4l2-std-id'>v4l2_std_id</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-buf-type'>v4l2_buf_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-colorspace'>v4l2_colorspace</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-ctrl-type'>v4l2_ctrl_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-exposure-auto-type'>v4l2_exposure_auto_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-field'>v4l2_field</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-frmivaltypes'>v4l2_frmivaltypes</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-frmsizetypes'>v4l2_frmsizetypes</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-memory'>v4l2_memory</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-ac3-bitrate'>v4l2_mpeg_audio_ac3_bitrate</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-crc'>v4l2_mpeg_audio_crc</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-emphasis'>v4l2_mpeg_audio_emphasis</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-encoding'>v4l2_mpeg_audio_encoding</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-l1-bitrate'>v4l2_mpeg_audio_l1_bitrate</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-l2-bitrate'>v4l2_mpeg_audio_l2_bitrate</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-l3-bitrate'>v4l2_mpeg_audio_l3_bitrate</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-mode'>v4l2_mpeg_audio_mode</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-mode-extension'>v4l2_mpeg_audio_mode_extension</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-audio-sampling-freq'>v4l2_mpeg_audio_sampling_freq</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='chroma-spatial-filter-type'>v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='luma-spatial-filter-type'>v4l2_mpeg_cx2341x_video_luma_spatial_filter_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-cx2341x-video-median-filter-type'>v4l2_mpeg_cx2341x_video_median_filter_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-cx2341x-video-spatial-filter-mode'>v4l2_mpeg_cx2341x_video_spatial_filter_mode</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-cx2341x-video-temporal-filter-mode'>v4l2_mpeg_cx2341x_video_temporal_filter_mode</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-stream-type'>v4l2_mpeg_stream_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-stream-vbi-fmt'>v4l2_mpeg_stream_vbi_fmt</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-video-aspect'>v4l2_mpeg_video_aspect</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-video-bitrate-mode'>v4l2_mpeg_video_bitrate_mode</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-mpeg-video-encoding'>v4l2_mpeg_video_encoding</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-power-line-frequency'>v4l2_power_line_frequency</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-priority'>v4l2_priority</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-tuner-type'>v4l2_tuner_type</link></primaryie></indexentry>
-<indexentry><primaryie>enum&nbsp;<link linkend='v4l2-preemphasis'>v4l2_preemphasis</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-clip'>v4l2_clip</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-control'>v4l2_control</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-crop'>v4l2_crop</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-cropcap'>v4l2_cropcap</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-ext-control'>v4l2_ext_control</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-ext-controls'>v4l2_ext_controls</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-fmtdesc'>v4l2_fmtdesc</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-format'>v4l2_format</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-fract'>v4l2_fract</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-framebuffer'>v4l2_framebuffer</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-frequency'>v4l2_frequency</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-frmival-stepwise'>v4l2_frmival_stepwise</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-frmivalenum'>v4l2_frmivalenum</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-frmsize-discrete'>v4l2_frmsize_discrete</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-frmsize-stepwise'>v4l2_frmsize_stepwise</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-frmsizeenum'>v4l2_frmsizeenum</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-hw-freq-seek'>v4l2_hw_freq_seek</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-input'>v4l2_input</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-jpegcompression'>v4l2_jpegcompression</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-modulator'>v4l2_modulator</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-mpeg-vbi-fmt-ivtv'>v4l2_mpeg_vbi_fmt_ivtv</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-output'>v4l2_output</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-outputparm'>v4l2_outputparm</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-pix-format'>v4l2_pix_format</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-queryctrl'>v4l2_queryctrl</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-querymenu'>v4l2_querymenu</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-rect'>v4l2_rect</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-requestbuffers'>v4l2_requestbuffers</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-sliced-vbi-cap'>v4l2_sliced_vbi_cap</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-sliced-vbi-data'>v4l2_sliced_vbi_data</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-sliced-vbi-format'>v4l2_sliced_vbi_format</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-standard'>v4l2_standard</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-streamparm'>v4l2_streamparm</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-timecode'>v4l2_timecode</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-tuner'>v4l2_tuner</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-vbi-format'>v4l2_vbi_format</link></primaryie></indexentry>
-<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-window'>v4l2_window</link></primaryie></indexentry>
-</index>
diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile
new file mode 100644
index 00000000000..6628b4b9cac
--- /dev/null
+++ b/Documentation/DocBook/media/Makefile
@@ -0,0 +1,386 @@
+###
+# Media build rules - Auto-generates media contents/indexes and *.h xml's
+#
+
+SHELL=/bin/bash
+
+MEDIA_OBJ_DIR=$(objtree)/Documentation/DocBook/
+MEDIA_SRC_DIR=$(srctree)/Documentation/DocBook/media
+
+MEDIA_TEMP =  media-entities.tmpl \
+	      media-indices.tmpl \
+	      videodev2.h.xml \
+	      v4l2.xml \
+	      audio.h.xml \
+	      ca.h.xml \
+	      dmx.h.xml \
+	      frontend.h.xml \
+	      net.h.xml \
+	      video.h.xml \
+
+IMGFILES := $(patsubst %.b64,%, $(notdir $(shell ls $(MEDIA_SRC_DIR)/*.b64)))
+OBJIMGFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(IMGFILES))
+GENFILES := $(addprefix $(MEDIA_OBJ_DIR)/, $(MEDIA_TEMP))
+
+PHONY += cleanmediadocs
+
+cleanmediadocs:
+	-@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
+
+$(obj)/media_api.xml: $(GENFILES) FORCE
+
+#$(MEDIA_OBJ_DIR)/media_api.html: $(MEDIA_OBJ_DIR)/media_api.xml
+#$(MEDIA_OBJ_DIR)/media_api.pdf: $(MEDIA_OBJ_DIR)/media_api.xml
+#$(MEDIA_OBJ_DIR)/media_api.ps: $(MEDIA_OBJ_DIR)/media_api.xml
+
+V4L_SGMLS = \
+	$(shell ls $(MEDIA_SRC_DIR)/v4l/*.xml|perl -ne 'print "$$1 " if (m,.*/(.*)\n,)') \
+	capture.c.xml \
+	keytable.c.xml \
+	v4l2grab.c.xml
+
+DVB_SGMLS = \
+	$(shell ls $(MEDIA_SRC_DIR)/dvb/*.xml|perl -ne 'print "$$1 " if (m,.*/(.*)\n,)')
+
+MEDIA_SGMLS =  $(addprefix ./,$(V4L_SGMLS)) $(addprefix ./,$(DVB_SGMLS)) $(addprefix ./,$(MEDIA_TEMP))
+
+FUNCS = \
+	close \
+	ioctl \
+	mmap \
+	munmap \
+	open \
+	poll \
+	read \
+	select \
+	write \
+
+IOCTLS = \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/v4l2-subdev.h) \
+	VIDIOC_SUBDEV_G_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_S_FRAME_INTERVAL \
+	VIDIOC_SUBDEV_ENUM_MBUS_CODE \
+	VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
+	VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
+
+TYPES = \
+	$(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /^}\s+([a-z0-9_]+_t)/' $(srctree)/include/linux/dvb/frontend.h)
+
+ENUMS = \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-mediabus.h) \
+	$(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-subdev.h)
+
+STRUCTS = \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/videodev2.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s\{]+)\s*/)' $(srctree)/include/linux/dvb/audio.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/ca.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/dmx.h) \
+	$(shell perl -ne 'print "$$1 " if (!/dtv\_cmds\_h/ && /^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/frontend.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([A-Z][^\s]+)\s+/)' $(srctree)/include/linux/dvb/net.h) \
+	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/video.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-subdev.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-mediabus.h)
+
+ERRORS = \
+	E2BIG \
+	EACCES \
+	EAGAIN \
+	EBADF \
+	EBADFD \
+	EBADR \
+	EBADRQC \
+	EBUSY \
+	ECHILD \
+	ECONNRESET \
+	EDEADLK \
+	EDOM \
+	EEXIST \
+	EFAULT \
+	EFBIG \
+	EILSEQ \
+	EINIT \
+	EINPROGRESS \
+	EINTR \
+	EINVAL \
+	EIO \
+	EMFILE \
+	ENFILE \
+	ENOBUFS \
+	ENODATA \
+	ENODEV \
+	ENOENT \
+	ENOIOCTLCMD \
+	ENOMEM \
+	ENOSPC \
+	ENOSR \
+	ENOSYS \
+	ENOTSUP \
+	ENOTSUPP \
+	ENOTTY \
+	ENXIO \
+	EOPNOTSUPP \
+	EOVERFLOW \
+	EPERM \
+	EPIPE \
+	EPROTO \
+	ERANGE \
+	EREMOTE \
+	EREMOTEIO \
+	ERESTART \
+	ERESTARTSYS \
+	ESHUTDOWN \
+	ESPIPE \
+	ETIME \
+	ETIMEDOUT \
+	EUSERS \
+	EWOULDBLOCK \
+	EXDEV \
+
+ESCAPE = \
+	-e "s/&/\\&amp;/g" \
+	-e "s/</\\&lt;/g" \
+	-e "s/>/\\&gt;/g"
+
+FILENAME = \
+	-e s,"^[^\/]*/",, \
+	-e s/"\\.xml"// \
+	-e s/"\\.tmpl"// \
+	-e s/\\\./-/g \
+	-e s/"^func-"// \
+	-e s/"^pixfmt-"// \
+	-e s/"^vidioc-"//
+
+# Generate references to these structs in videodev2.h.xml.
+DOCUMENTED = \
+	-e "s/\(enum *\)v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1<link linkend=\"\2\">v4l2_mpeg_cx2341x_video_\2<\/link>/g" \
+	-e "s/\(\(enum\|struct\) *\)\(v4l2_[a-zA-Z0-9_]*\)/\1<link linkend=\"\3\">\3<\/link>/g" \
+	-e "s/\(V4L2_PIX_FMT_[A-Z0-9_]\+\) /<link linkend=\"\1\">\1<\/link> /g" \
+	-e ":a;s/\(linkend=\".*\)_\(.*\">\)/\1-\2/;ta" \
+	-e "s/v4l2\-mpeg\-vbi\-ITV0/v4l2-mpeg-vbi-itv0-1/g"
+
+DVB_DOCUMENTED = \
+	-e "s/\(linkend\=\"\)FE_SET_PROPERTY/\1FE_GET_PROPERTY/g" \
+	-e "s,\(struct\s\+\)\([a-z0-9_]\+\)\(\s\+{\),\1\<link linkend=\"\2\">\2\<\/link\>\3,g" \
+	-e "s,\(}\s\+\)\([a-z0-9_]\+_t\+\),\1\<link linkend=\"\2\">\2\<\/link\>,g" \
+	-e "s,\(define\s\+\)\(DTV_[A-Z0-9_]\+\)\(\s\+[0-9]\+\),\1\<link linkend=\"\2\">\2\<\/link\>\3,g" \
+	-e "s,<link\s\+linkend=\".*\">\(DTV_IOCTL_MAX_MSGS\|dtv_cmds_h\|__.*_old\)<\/link>,\1,g" \
+	-e ":a;s/\(linkend=\".*\)_\(.*\">\)/\1-\2/;ta" \
+	-e "s,\(audio-mixer\|audio-karaoke\|audio-status\|ca-slot-info\|ca-descr-info\|ca-caps\|ca-msg\|ca-descr\|ca-pid\|dmx-filter\|dmx-caps\|video-system\|video-highlight\|video-spu\|video-spu-palette\|video-navi-pack\)-t,\1,g" \
+	-e "s,DTV-ISDBT-LAYER[A-C],DTV-ISDBT-LAYER,g" \
+	-e "s,\(define\s\+\)\([A-Z0-9_]\+\)\(\s\+_IO\),\1\<link linkend=\"\2\">\2\<\/link\>\3,g" \
+	-e "s,<link\s\+linkend=\".*\">\(__.*_OLD\)<\/link>,\1,g" \
+
+#
+# Media targets and dependencies
+#
+
+install_media_images = \
+	$(Q)cp $(OBJIMGFILES) $(MEDIA_OBJ_DIR)/media_api
+
+$(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
+	$(Q)base64 -d $< >$@
+
+$(MEDIA_OBJ_DIR)/v4l2.xml: $(OBJIMGFILES)
+	@$($(quiet)gen_xml)
+	@(ln -sf $(MEDIA_SRC_DIR)/v4l/*xml $(MEDIA_OBJ_DIR)/)
+	@(ln -sf $(MEDIA_SRC_DIR)/dvb/*xml $(MEDIA_OBJ_DIR)/)
+
+$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DOCUMENTED) |		\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/linux/dvb/audio.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/linux/dvb/frontend.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/linux/dvb/net.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/video.h.xml: $(srctree)/include/linux/dvb/video.h $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(					\
+	echo "<programlisting>") > $@
+	@(					\
+	expand --tabs=8 < $< |			\
+	  sed $(ESCAPE) $(DVB_DOCUMENTED) |	\
+	  sed 's/i\.e\./&ie;/') >> $@
+	@(					\
+	echo "</programlisting>") >> $@
+
+$(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(								\
+	echo "<!-- Generated file! Do not edit. -->") >$@
+	@(								\
+	echo -e "\n<!-- Functions -->") >>$@
+	@(								\
+	for ident in $(FUNCS) ; do					\
+	  entity=`echo $$ident | tr _ -` ;				\
+	  echo "<!ENTITY func-$$entity \"<link"				\
+	    "linkend='func-$$entity'><function>$$ident()</function></link>\">" \
+	  >>$@ ;							\
+	done)
+	@(								\
+	echo -e "\n<!-- Ioctls -->") >>$@
+	@(								\
+	for ident in $(IOCTLS) ; do					\
+	  entity=`echo $$ident | tr _ -` ;				\
+	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
+	  echo "<!ENTITY $$entity \"<link"				\
+	    "linkend='$$id'><constant>$$ident</constant></link>\">"	\
+	  >>$@ ;							\
+	done)
+	@(								\
+	echo -e "\n<!-- Types -->") >>$@
+	@(								\
+	for ident in $(TYPES) ; do					\
+	  entity=`echo $$ident | tr _ -` ;				\
+	  echo "<!ENTITY $$entity \"<link"				\
+	    "linkend='$$entity'>$$ident</link>\">" >>$@ ;		\
+	done)
+	@(								\
+	echo -e "\n<!-- Enums -->") >>$@
+	@(								\
+	for ident in $(ENUMS) ; do					\
+	  entity=`echo $$ident | sed -e "s/v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1/" | tr _ -` ; \
+	  echo "<!ENTITY $$entity \"enum&nbsp;<link"			\
+	    "linkend='$$entity'>$$ident</link>\">" >>$@ ;		\
+	done)
+	@(								\
+	echo -e "\n<!-- Structures -->") >>$@
+	@(								\
+	for ident in $(STRUCTS) ; do					\
+	  entity=`echo $$ident | tr _ - | sed s/v4l2-mpeg-vbi-ITV0/v4l2-mpeg-vbi-itv0-1/g` ; \
+	  echo "<!ENTITY $$entity \"struct&nbsp;<link"			\
+	    "linkend='$$entity'>$$ident</link>\">" >>$@ ;		\
+	done)
+	@(								\
+	echo -e "\n<!-- Error Codes -->") >>$@
+	@(								\
+	for ident in $(ERRORS) ; do					\
+	  echo "<!ENTITY $$ident \"<errorcode>$$ident</errorcode>"	\
+	    "error code\">" >>$@ ;					\
+	done)
+	@(								\
+	echo -e "\n<!-- Subsections -->") >>$@
+	@(								\
+	for file in $(MEDIA_SGMLS) ; do					\
+	  entity=`echo "$$file" | sed $(FILENAME) -e s/"^([^-]*)"/sub\1/` ; \
+	  if ! echo "$$file" |						\
+	    grep -q -E -e '^(func|vidioc|pixfmt)-' ; then		\
+	    echo "<!ENTITY sub-$$entity SYSTEM \"$$file\">" >>$@ ;	\
+	  fi ;								\
+	done)
+	@(								\
+	echo -e "\n<!-- Function Reference -->") >>$@
+	@(								\
+	for file in $(MEDIA_SGMLS) ; do					\
+	  if echo "$$file" |						\
+	    grep -q -E -e '(func|vidioc|pixfmt)-' ; then		\
+	    entity=`echo "$$file" |sed $(FILENAME)` ;			\
+	    echo "<!ENTITY $$entity SYSTEM \"$$file\">" >>$@ ;	\
+	  fi ;								\
+	done)
+
+# Jade can auto-generate a list-of-tables, which includes all structs,
+# but we only want data types, all types, and sorted please.
+$(MEDIA_OBJ_DIR)/media-indices.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
+	@$($(quiet)gen_xml)
+	@(								\
+	echo "<!-- Generated file! Do not edit. -->") >$@
+	@(								\
+	echo -e "\n<index><title>List of Types</title>") >>$@
+	@(								\
+	for ident in $(TYPES) ; do					\
+	  id=`echo $$ident | tr _ -` ;					\
+	  echo "<indexentry><primaryie><link"				\
+	    "linkend='$$id'>$$ident</link></primaryie></indexentry>" >>$@ ; \
+	done)
+	@(								\
+	for ident in $(ENUMS) ; do					\
+	  id=`echo $$ident | sed -e "s/v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1/" | tr _ -`; \
+	  echo "<indexentry><primaryie>enum&nbsp;<link"			\
+	    "linkend='$$id'>$$ident</link></primaryie></indexentry>" >>$@ ; \
+	done)
+	@(								\
+	for ident in $(STRUCTS) ; do					\
+	  id=`echo $$ident | tr _ - | sed s/v4l2-mpeg-vbi-ITV0/v4l2-mpeg-vbi-itv0-1/g` ; \
+	  echo "<indexentry><primaryie>struct&nbsp;<link"		\
+	    "linkend='$$id'>$$ident</link></primaryie></indexentry>" >>$@ ; \
+	done)
+	@(								\
+	echo "</index>") >>$@
+
diff --git a/Documentation/DocBook/media/bayer.png.b64 b/Documentation/DocBook/media/bayer.png.b64
new file mode 100644
index 00000000000..ccdf2bcda95
--- /dev/null
+++ b/Documentation/DocBook/media/bayer.png.b64
@@ -0,0 +1,171 @@
+iVBORw0KGgoAAAANSUhEUgAAAlgAAACqCAMAAABGfcHVAAAAAXNSR0IArs4c6QAAAwBQTFRFAAIA
+CAICAAQVEQEBAgsAJgECAAogAwsTAQopHQYBNAEAAAxNARQAERIQAhoDABwAABZEHRQKGRYKQw0F
+ACMBACUAERwpHR4cVRAFBR5rZhADACR2JiIhBDAGAiWGgQ4AcxQABDYACSeQMSYlJykmESxYlQ4A
+PSYZIS05OSsJHS5JOC8kAEMDUC8SADXLNDUzADbEAEsAADX/2RABCFIAAD/qxB0AAD//BFgAK0Vp
+WT4r3hwA3RsTRERAAEf/5CIA2iYCCUv+WUgz7iIAOk5g3CgVSU5SiD8uB2sABm8AE1X/U1RQOFyL
+4jkfIlz/RV98M1j+G2H/fVk23jtD4T0pXl9ieFtGcV894UIiYWJfAIwA50gOV2p+4kssO2j+dGZx
+bG1qVmj/OHH/aHJzfnBX5lQ7B50AZnahdXd0AKUG5V1ARnz/6mErCqgAAKsAent46GBIW4GhAK0A
+AK8B42FtALIOin9/ALUAiIOBALkAVIf/6WxWg4eBi4SKJrEAmoVtdY2geoP/rYVXhoyOqYVuJbUh
+IrgWX5D/jo6J7nszP7gAsI9S63xnN70zZqO/fZzCOb4+cZr+64dy8otYnJ6b7ImDRcM56IqcWMEo
+oJb/N8ZoTMRL7Y9/QchcsaOTo6eohaj/7ZqKXspXj6v9xal+oK+7d7vTUM+Afco5r7CumLTVStKV
+bs9ukbb/9qx/9q9l8queoLv/e9R66beG7rDImNRhi9aDwsPAs8bWzcK2cd67jtqP5MWUodyB8b+1
+tMr/z8L/j9+kbOXWnN2ZstD7yc7Rzs7Ly9xb183UwdD/+si/qeOmvuKIx9fj4tPCtuWiqOrL+tS2
+y9v++NPK2dvZt+m0ueq80+Wo3OeSwuy/yezG+d7f/eS/z/DS3uf/6Ono4PC71O39xPb02vPZ/+nR
++Ori6e399+vt+PGz+ur65fL55/Xb4vbh7ffX/PPY8vP9+vLy6Pf36fjr/PfM8vjr//f+/vn48P36
+9vv+/vzf+fv4/fvu//z7+v7//P/7/v/8//QpxAAAAAFiS0dEAIgFHUgAAAAJcEhZcwAAFY8AABWW
+AQ2TT8cAAAAHdElNRQfaCRQXGSltwbPRAAAgAElEQVR42u2dDXwU1bXAZwEJtEaNH1nbh68fpoWK
+iE1ao2Bgo9RqIrEg+BIFmqLYLOlMcHHlU6DiQmrJM2jKo0QIBHgUjD5ETcQIlKq0gKDmA+UjiRAT
+BCOBkGzC5re/++6987Ezszszdzc7s9jfPa2wO+zMPefc/5575t67Z5hB/0Ek/W668xckcmVmQZ5S
+CvLmgshl4QCiZu+8ntCOgWlzVfrl5ZZFrl6T/VYSv9x5K3Pj9wnkh9fFFxQE6VcVqXY+8PjgH5K0
++/0bBxDaYcsN0i+vLlTbzH9kjEknkEF3zptjLPPmXL2VwGC/nxysm+YRyc+/S2bHNYUgmtJkf5RI
+vScH3HEvifz05mhqB8G68d6xJO3ecSWhHXYfYdvM99LHGEv6mEF3zmFJ5Gr49e9qVUh7O/wP/w/9
+gf4EXnKwbpjNGQs779bvktlxzULg7TCQzvDAItBvzqMD7hjrMJaxPx0Cv3OdBvqFBRZJs46xCCwi
+O+xNwNfSclom6F2L4j1A/UsG1hgI1jyWUzLEKf/gX0CwevIzsvSlJoyh8IY5LmPhEFhEhsCI9b7L
+oy/uI2GBRaDfPATWaGO596dDADhioJ+7PKyI5SBoF4NFZAcEa6ZjvL7MOg9MAWtPxv4aHdlfM315
+TMHy7Gg4pifN5cUxBMsPisub9dRrqHc1xBCsC7vHH6jVlQOO3eGBhccc9B+rGIWkP/ALBNYEA3uX
+xxasooMGbVaWxhSs0kr9Njs8zbEE60C2UbOTTAOrR6/ZHjB/ZWzBet+gzR0xBmuHfpttsQbLIEP2
+ZpsGVrsBWMspWBQsGrEoWFEAK1UUDbBkQEkJu+Ko+WDxDRmApWmH+WCF0u/bCFYIMyIHK30CL1kZ
+Y1J17wo51snhW1/4d9BdoZlgcZx7mcezzM1yemBp22E2WBzL66fsExVYjmxBxsNed1gHVra8XX2w
+WBc2A/4dDbCSp4v/2PrGb1L1hkKnZ8sRNFH39cel6K1lQyFbvLcZXf3YrmWsNlg6dpgMFltc3dAN
+j3+zazWrCVbKBun8ltcfS3FYBpb0D721L+uCxXoqxO5VfEMiBmsa6BL/+UxWqhZYMFytPSVd5yMU
+qKxJ3jlub7f4D5f+xmqDpW2HuWCxr0r69b7N6oAV6JsTj6VYBpaciP9L0QaLVXQv13ewUqeBdjyS
+ZM0/Cf6uBRbkak03uLSraBHnWfsJAJ/LEi2TIxZs7bPyZS6XZwu0XEaWCiwdO0wFi3sXgC/K4QDi
+qfhEoV8QWNtT8FLK+L90gddHWwjWjNGw1dG/mgW7/jFNsFjYvd/sKnK73Kh7P4oSWHw3JOcDkJGq
+BVbxBfD5IidKqpzOV/3gb05rwGJfRXEAfYM41nMKfMXpgaVhh5lgsVsAeJvj9YOMXVrE6YAlvHwa
+XJSFLJPBOg8m8W2lpLwFQ5YjNFgc6t45OFCx0OVgNRu1iIVEByznu+ArIUixnPMfKGRZARaCSRpf
+ENx/4wwiVgg7TASLc52CA4f4BiobCFmaYDlSusBUC8GaGgC6VgssFnavS3QtC7uXiyJYMP09o5m8
+O2GfOsW8il1TudoisF4FX8hGvy3lc1yGYAXZYSZYa+RBitvy9hyXIVij744RWP+jDRb8ygaCFLdm
+x7KoJO/tyWj2Jz3/JPhjssY8lnNL91cvsNL8KOtk1fNY5iTv3D/AP2UJMaubvGvZYSJY8Jv+T04+
+8eAyBCsFdvBXVg6F2UK7k85oDoUs7N5FsiwjSsk7v5cKkqHsD3nEcm4BnznxHINTENaaCVJpcBGn
+zXQilpYdZoL1iThSB+kXBNbu8VOhzFhwAICXrUzeF2RPnTpp6qy/nAG9YzWSd5gpfqZhRl/AkpjY
+P0HrrtBZDQ468ZuKHVgqXdYk793Ag4zkllXyDZfq5FhadpgJVjMoxZ3g3sHrV84ZzmMB8LpjdCym
+G3r/oDXdwFaD97EZHG9FxQ53VHKsadOh5K8/q51jYbDwC/FSiywFixX7/Sirk2Np2GEmWA2gHOvn
+Efe3aCfvXiTA27J9lpVLOl7cLvyH2g2PaU6QSmCx4mXcXDTASkaSmpxxEvw1VXsofBLPt79/9AgU
+2DJr5VDIFh2rh9IM6vXA0rDDgqGQW4b1awAN+neFvzoDvpTPjlqVvD8Nw+ToFG2wxKGQO3gUmnEk
+GmAlS/M/Y5KXg5pkLbD45F3IsdhgsExO3vHS5JMV2mDp2GFJ8o71KzYCK+VhSJYjxXKw4A0DeF0P
+LDF5xxOVXLQiltg384PAktaanxSmG+D9AkrtEFhWLEKzr4Jv+FsUNOizO/QjloYd5k439C6SVIID
+doPRPNbTXeA96yPW6JS3AFCkWMrpBg/qXmmYcEcbLO2IxTrfBRdfcAqYOZ1WDYVozvGf0s2vkxAs
+6yIWGqs/l9ZsnWtBsxFYKHa8bOEitDiPBQfhc49prhWyqHuliWhX1HIsvI1JL8eCMJ0CF1ezeBxk
+iz+xLMdCSyYfzRZugbd0gCO6OVZoO0xd0lnTDT57QdiktqYDtBnOvMPYcc7CRWhpghSmWW9qgoVW
+EC6u5uMGh7s3KmBNQzJ9+UnQpTnzzjmLTwHwRUVxcemWBnjnusuqRWi0ctX5cXlR8dq9HQB8s1pv
+SUfDDlMjFkxPQO/H5auKy/e2of0XhmuFKQ93gTctHwpHO1ColA+GqkVovntXFQndG5WZd0m6fqe9
+bYZzej6RPvjZ6qAJUtP2vLNrpP0c53bNYXVm3rXsMHnbzFrJL727XtCbIA0srYA/pVg33SAu6dx9
+BpyQ3Teot80oujc6E6TtWBpr1mfobPRDUrzlSEfH10d3FcEbBws3+rnX7m3o6Pjm43K9jX46dpi8
+0Y9zFe891tHZ/HHFMo5zEawV/uo4+HKsVWCdli1C+2F2p7nRj+OK+O7dUeRio7vnPdVoazIr3/Ru
+4dZkce2bI9vznmr51mRh2wd72e95T9HdmhzKDEt+paP4MQX9+Rf9lU60wKI//6JgUbAoWJczWMRF
+QehQSMEyJWJNM7B3eYwj1re8KEhnjMGaZNSsaUVB0tcrZaPqbVaMyxiVVlcqRP22KLZljEqLlApV
+q97uiG0ZowOOVzboyitmlTECK6fly2V6fr7qfXtMwTpaVKyUUtX74uYYggVAs1o9lX5F1SCGYDWB
+l2bMVMos5dsZL4HwwTIQFwYrmmICWNEUM8CKnpgDFpmEAVZQM263+shsl1ZxWz/6H/oD/ukPC6x5
+s42L6s4mrEFqClgkRX8hWPeONRYzwBpN0i4Ci8iOkGB5Q7xjbP2CZGDwoX62K29Qy/U33RB8bEDS
+SLUkpfUlYjE3EMmVIewIJTZ7sH4FfQHrqhuuV8tNQUduuJrpTyQ228hg/UoiByuXsN3+A64OtiPE
+kauYEP0bslw4c9MD9xPIA9d/5wc/JJH+uWUlaunL6Di3P1GzPxhMaMfV920N0q8qcvVO27/34/80
+lh9/b8D9D5DIz+3B7ivZFzlYv73+AaKG7x9AaEd8YbB+IUdH5hdkddR/9H2iOuX3XrE1ujnW3O+Q
+tXsdqR3PRnko/GUGQXX5jNsYjki9B5JIWvWSg3UrmVtY5jYSO9J/SV7n/efzOJKsDYI1mkSugOGp
+7ai+HAsLrLEE2afj3uvI7JhzEwTrgJGEA9ZtRPXlbx/wJMlNCA/WfgNpB/4wwCJyy5PM7UQ56u0w
+x2o7YtC/bSaB1eZx6xcqd9XHFKyXpLpnGuLYQBwTog+WF7wmlo3TkIzp7SB2YJ027F63p80csOoX
+dXR3aksHKC2PKVjZG8BpPQEvzYgpWPkrhd1koaWnJqMmhmCdqXd3dOpJd4e73hywjngM7C2viClY
+M7YbtPnKrFiDpSutWY0xBcuoe4HHNLC6KVgmgtUYa7AM8ncfBYuCRcGiYH3rwRJ+UKYLVookVoLl
+0Gw3FFgh7TAZrNRkQVKNwVKXCLIIrNBuUYKlZUZfwOJYd3FpeemqZawOWI4VCwSZ6bAyYk0V2501
+VVnzIBgsDTvMBSt1+vL5WPKVtZNCgMW6iqB6pcs41lKwtNyiACt1gmjGNHWZ/IjBYj17+T0jX+9a
+xGqCNT5wlZbXrQMrJUBEb+0f5D9NDwJLyw5zwUreLx4/80Z6qg5YrGvLMeykznplPXiTwZLc8o3K
+LQqwkqX9cl5VdbGIwWLXXIDGNjc0dwBwSfFLRWXEAoB/NN3xLgBetw6sDeC00C5UT/5LXjVYmnaY
+DNYe0IoeydgIe75GBywO/SC0t62hARXpV5S7NhcsdouWW9RgdfFm+EGXskx+hGCxW/yoTjnHch6o
+wsUXdMDi053Rk94CQFFewmSwtgsp1oIz4M2xmmBp22E6WCtxapK+shv8MVUTLM8p0LurCFVRXauq
+B28qWKj2hcwti3TAqklORRlWvrpMfoRgeU6Cz4VfvqLyDB+x2mA5UCV62OV3v6V8xoHpYOHC+6ic
+9CUZ0CqwtO0wHaz1yWPSUfb7GngjWQss9l0UL4QSVKgevEVgofrtvFtw9Y1drA5YqenIjuT5UqGx
+voCFCnzPFltzvgo+l1XADwZL6Oy/SHUIrAFLfH0azNACS8cOK8DCr1aCPVpgscXdgSjFek71yoqH
+mAkWrt+u4ZbgiKWuYNcXsIrlNe9dntJlLpcxWG8pC+JYBdbDivroSrB07LAALFw9acwH2kMh7ODP
+ZflN6arZ1kQsPbeEAAvbsTIaQyG79pQ8HXEpCnyHzrFSUHGJP8Ugx4Ij8InHNHIsPTtMB2vjmIyM
+jKzpe5QdohwK/6GsB29R8q7rliCwxmRBM6at7z7zm2iABb7RLPCtBmsFlld2A/CplXeFtQtwuxvO
+AHmxFDVY2naYDpbU+2O0wTolPPmBcwbVgzcVLB23aEw3gK7fJfd9uoEtB8f4Osw7ULnc+vpjHlYL
+rIDjP1UW/jUZrIC8PFoTLB07LAML7E/XBMsnlBUv4tU7uoO1BKwK0S2VQrsezhAs0Pi71KiB5XaK
+v6srZnXnsbygd/tMVWFnk8FqOYAnsb58KVt75l3PDvNzrFS0E3nCym7FWKgEqxsUadSrNxUsyS1t
+wW4JcVcIBT2VrysKEWut/yIfossr0SMJOsEqVjfHelo9O2pRjvUW+FJZ9Fc9FGrbYdFdYWry/G4g
+G0XUQyFOojkPUq/iiKxIr7lDodotRazBXWFqctZJ8NfkKCTvwnQsXw65Qw8sNI/FFwxPsRYs9BzH
+46D3MZ2IpWOHVdMNY1JrwHwNsHTq1ZsJFgfd8oLCLYZgwZfrFfNxkc5jfSKfS2QNwBIKhv/J4oiF
+XkxCFTS1F6F17LAMrGRtsFhUDz6g7A6LwFK5hbMQLG4NWl/gxJKMHXo5Ft+vdx9XFQy3BCx+ENZe
+hNaxwyqwUtNPakcszyk0A87x6jmrZWXFzQULAh1wC8z0VhmClZr6RjTAQlN34O1l+HET7jUNQIa0
+BlgpDwNFOWmrJkhhqOzVWYTWtsOatcLk5DGvgTOy/Q2qJZ21F8AXq92ouoq7aK8ffMxatFao7ZZg
+sPj9WMv9QHFbGCFYnAs23ftxZcWOgx3oOezGM+9BT8+waOYdDoafai9Ca9thOlh7lq+Esr4GKJJe
+1SI03nzxBVSvGpW9/uwFa5Z0VG659LbOPFYjNmPlHgD+nhyV/VicVEi996NlrM5+LLG3YQ9flG+6
+Mxms3YFnGsufIBm0H0vLDqv2YwGwUXc/VvFe8XNflLo4y/ZjabpFcx5rf3qUdpCyruLqg0cOVpe7
+We2Nfo7aA9Ja4YLa2plWgbXi+EvSIvT22t1jdXaQathhMljra/BPlfe8sVK5jSloBynLeir2HqlH
+5eBZ6/ZjSW6pVLtFCVa+YMaejdNTo73nnTXY8x76tfl73h2ybfcke97Z2Ox5Tybd887FZs87S7bn
+PWjTu9m/0nE4ZC8dlu15d2i1e9n8SkeonfFt/5VOuoYd9Odf9OdffQKL/q6QgkXBomBRsPoKlo+C
+9e8MllGzZoFV7+4EPm3pBqWxBSt7A/DqyWVQxqirpwv+H/6BRfybF9AY4zJGHt3u9YFOs8BqVlfi
+KlIXXjsYU7BWOCYpC61NUr6f5NhArJ4ZYK1Pn6astKZ6mzWtNYZgnf7aYyjNPFizSeowQ7DGkgiq
+QdpWf0QhR5Vv64+CcMAiaheBRWZHqFKRu1UCog7WbQOcROWucanID5RSs3+PUlrDKhVJ5BYnQ2iH
+vQl8repetdTj/ZXMreyTBML+6EbHHSRyRYmv6fQZlYDI5ZnvELU7+joyO5w3PXO+6YJKuiNXr8l+
++5hfGkv67cyjThI3329vamrqVYu61TCK2/6IzC2PwohFYAeMWB8Gd29IdZgBVwbJVVcFHxtgG0wk
+tiH2IBnZB7BKCNu9NpQdwYeuZOKD1IvP7QNYSf0GBsmg4EP9mBC6XB3iWLB69viIn3ngA8+GajeU
+MKR2BOtnD13nPbNuH4HUjcwl+ty+pMLgz9X1BayRZPpl9sGOPujXNKSs7kNjqSuzV5HoV1eYFOJo
+U+Rg5RK6pcreBztCTgIwhF/XtKVkn0siqfPeRe6bQsLHWuROJrRjIYimNNnJqKyznyf63NakaGrn
+Azk5ZJ/sIraDpM67VwCrcf1GXVnfDjtkLgANldX6gsAqA2C//vXWv0acJPBgvW/QbmUbADkQrI0b
+CewoAJ1GZlSHAxYcB+r1L1gJ7773oWfQbDd4HNsBASwD7SobwgLLf3yDgWzn7TDqXtGOAxsM7fBi
+sHqmTcifriP5WfkYrA6P+nlsKnFVYLBqMqZN15X0jWFFrGqXfrPFniIfAmtlhq4Zgh3PglJ3qbEd
+YYBVb6Sfqx53yAbHzBm64qiFYPlAhUtfvyJPWzhgeWdkz9JtdqZjA7TjX4bdy9txoXb8jBmGdmCw
+2rMMJtzemIDBanYbGFRZjMHak2VgbziP7oVgVRg98PSYuwOBZTRjzdvxLPAYPmG1OCywqosMPlRU
+jcFascDgc9m7MVhGj+7tcDeEA9bp8bUGH1uwAoH1tbuDxI4LB7KBsR08WBP2AP6Rb/5QAjtkGg+W
+0SNj0bOUk/hnQoe8EN9GTwRg6Q/sxzydAlh+YzuejfIzoavA+0ZgreLBemmBfgrgJQQrnGdCQ7DO
+Zx8wSIh4sNoMA+EqASyyZ0IjsPYbfNPDBSuKT7EnilgSWAR2ULAoWBQsChYFi4JFwaJgfVvBajcA
+azkFi4JFIxYFi4JFwaJgUbAoWBQsChZN3ilYNGJRsChYFCwKVphg5RCCVUAG1pCS6A6Fc0eSgNUB
+cu4jBKsgumDFE4IVTwZWmT3KYGWC00RgxROCFU8MViEZWLklZGDlVEU3YpXlkkWswgIysKAdUQUr
+s44IrLpMMrCqMkFUwVo4lzBiZf7raxKw6jK7ScECRGChaxGBBSWqYEEhAgsKCVjQDm80wUJCAhYS
+ErCQRA8sLERg4e5tI7Jjd1TBQjuiiMDygegOhfCCZGD1kEUsnzeqEQvZSwSWjxAsX5TB8hGC5SME
+yxdtsC77iOUnAwsKjViXU8QKC6xoRiwKFgWLRiwKFgWLgkXBomBRsChYFCwKFgWL3hVSsChYNGJR
+sChYFCwKFgWLgkXBomBhsGoIwTIoR1IpgmWg4PIwk/dygw80IMUgWOsJwTKsNhNlsIolsPRlkgBW
+pf7HOsIFy6jazIoVRN0r2LHbsNrMJBGsjNcaa3SkcT1fl6jBVd/coCNtFXz5nz0ZNcrrqa7emB8m
+WMVtDbrtHnR1oC9e/nxdMyQ7PJUG16soDku/ao+uWxqaPTwpK2Ycr9WV8TxYxeW6+jUfcTWEo97p
+8dv12z0+cwXfvUeI7Ng9vraWwA4IFliZkaWQaRMUbydk8KHAV+7WL+8t1G9vn66+nvJtFnEBfGGk
+W2RQVhwXSvNDoLN0RbSj0uUhsoNUDOvaCxGmdrxKpirfOma04M/VG+jnLveFpd8Kh7Kd7Gy1IgeI
+ulewo2WG6nrjs0PZwaCa4Y2tja2tjY3wL/g3fo3+j9/gF9LorpQO1Xt+jPaDdnxuo3AJ8bKyNkjr
+lIuxv81AhM81tirsaNWyo43wepHqp37fKeQyLcdb9OT4eSEHazO4XpjqAf1moVZ8uz4jt3TyZpw3
+uh62gyFSzQ8uf/H/m9jxbyIMdQEVChYVChYVChYVKhQsKhQsKhQsKlQoWFQoWFQoWCD0g0V8fvUL
+2SdDbKDwmqqu1xtQQd1SqCNBp/WYrKDkpR5/kEt9BKf5zFscUDTfE/zSq+llXwTdq4hYWwvmIlla
+8o786M6SwmeXbj6ruOjhrYVzl5YdEo41FSycK5z5odnfhJadJagZ6XG7hULLSBm0ZFNXoDgiSi86
+benmdtO/qYGGsGuqeJfOXbi0rJVfUtonOHnp5h6VlxeqvRxlrsokXTa3KjpzHWq6Sd408vKzopel
+M5eWHIpsKExjBIkfd1LEc93wBHxo2JRuiebD9wyxoWOJ4w7hz9QxktinmNp3LYtvxi3HD1si+EFs
+2JY4hf9yyHXhu9ILehcPF0/zmxey4IV7BXfFDVvSjRvKlanzIj5SKB0Y9g7Q8rIpYKUxoZremZYg
+eOuk6JqAlzerzhTACBesTGZkDpTJsKlbeANbHoH43Dc5J3M4w9wiXvP5BCYOHUuzMQO3ocel1jHx
+OVgyYf89ZOJ37vBQ6JP7YDsJjO0hXsN4JlNs+SkcIhi7qAsDj3Sh074cJZ3G3GVaz6H9C7Ahu+Cu
+u86iYwVMkqBOAtNvG3JNCX9kMjww6JD8tEzey2dN857QvTk5sH8HviN00xM2Ji5tMvZfIj7mlbyc
+hrzs589ME8Eg9Z8KrBL+xbqh/V7EcX0iE7fkEPrWt6yTrvmcjZnyYQ+Ol6OYQTU4YsVLEaV/3Aem
+9dyXI5jEzdjxdYttzO9xOLIzTfwQ9Hx/rEsVIz7bvOURW2KNeNqSJv60BHiaecPgKNjQId4PCcyD
+PFjis5EPj7Jh1kqYTOHACPgRv+RlIHj5Qb95YJWIugy1Pci/eo6JEzpz3XAhdEB3DdvcJHr5KcWZ
+6wbzYIQNlvjA9CeY3yKbN6GQJMh7gxkcGE8k2J4Sj50bxUzhwRLzu97/Mq/n4LWlqAnxjsOv7cw+
+4V+HM1sxWElisnnpZ7YXkRXPMbdIucEm4bToC24oUcpON/W3HVKABb66FkeoEiYNKojo2cQMA7yX
+A6dBL79jHliFUjPMNThlec8WJ4FyYiizJNjLiScVSCIwIgfLDxZiPHqHMjI+JyIdusAjzDi/6Enw
+pu2hs3Kw/HJPRrvjDg+OCzj93IjEDySwvH6o2HDbZgVYXYI9h69gtgXgHJG4zaxtWS3XMbJrTxy4
+TeUO/jvAg4XzdeYWrNJ1zIuB9GFi3IsWgNXL2M6jUW8UzFykf3+OeQpqj73slcYI6OUAWH6QRxo3
+QkescyP6ob54b8A1rYF/PXcIJiz+iz/jUwW+oUsfnvdaFrH+zPwk0AG9hw95gWwohN91/EWTR6x7
+bEuE0wLSiawwR95kftKtcpccrBPX9jskHwrBRD4rhNHjrPo08yPWoPNYpUEBiADsTOyuu4CkQm8n
+9LIsYn05ot8HEYGVu68KyrpRcLSDt3+/tj0l3HBCEW6Ot18x7JR0DM+6+GU5Vi/MsfaY1XG/Zv4X
+KNThc6wSrPPihMRtQJFj9T5iG/gBPu2/g08zI3VXNCT0TagcKw0rvPUe20N4UgJ62a/2sgU5Fmpz
+Q/9xFwKdqeVldGYeD8bQuCWE92YqsEQZ181rsjTohHXMfUGXhmAVYMk19a5wKBNiGiU+XtSZn26o
+YobMRark5eK7Qi867R1ggfjguLI56GgBM5JXJwfeSgt3haLGiYcwj6G8bBJYabwu8IZ0IJ4oeoZ5
+POj7EexlnwqMSMCyJyEZYkP5G5q+4BH3jeQlTYjkXlxCPAkfS6rDYEkTHQ+1muYaO1OHo03VEL7l
+PB6sJEFnfGsMwZJ0ieMjwRCmisdfUDgH+MzpuJH47gGAJqGhTHisIDB3lMinEBAsXuEEG8zZ/TIv
+JwW8bBJY4pyfeLeQJ8bTNEFlH/DFq7xcgM+UgxF5jtWybiiDponE75JPpAb75T4erCTh4D4MVi6U
+oTbhZtskuVn4LolzoJkibcJEBx6Jqhg7VCUnIT5xyVnxtHeEWMZLmllgpQkRS5wvTsJgjczLzc0c
+HD9MnPUXcyzv4XuYRMXXV+ZlsyIWdE1mf2bcZiHuSBFLRA7mqwlBXg4Moi3rbmYe8kcOFkzuEq75
+AA23S7AGvq1QqgqZIfD17sHj+ByrCh3cahfAQkc+HYxaNW+x60Zh9G/C6uSIYO0Tb/ZtP+mRcqxN
+trglqtSMPy3XLLACORbvLogUBiuXny5KFO9MA3eFJ0b0ezHotELIo6k5Vu9E5hYxY39ezLFwZ5bF
+I7DUXs5RpP0QjJo+gNUDhjNl6DZHfldYh8E68bNB2xTD077AXeGmBHT3ahpZf2YelC2eFirAQvdT
+TL/zgbvC51CGhXVR3hVuNQss3JDM9io5WLA3+21TgyVMCilvJveZCVYh8si5UWjePYBJICXGEes5
+6OUumZdz5Gm/X5gtjBSsLhif4fmXZPNYfvAhAgvNYz0kW65UgAWet9leNAsrPzjcP64m8G6pGqxe
+xtYjm26YaBO6Ep4mZu9ePygzD6xzV0jzWLChrXKwwLkRaNxTgCVOcp2TzbMhL5sLFpozGMrccoEP
+sqOYpwJN92CwdvZPVHhZAVaXlEhGOBQKcUk+lQzvB6/FlPfv91RgkeVaOVj+XvhlOGkWWTiIB67+
+hHoofNP23XYZWOew+/zq0xabB5Ziih+6Sw4WzhOE5F1U4NJE2+9BsJeHmD6Ptckm8iRfWgGH8awp
+dNddSi+LYHl5MPZHApYAZssjDB58YSOJwlrhzidsaAUCyNYKfXWLb7bZ6gJgecGJwba7zNs+EFjF
+atl5j42ZrJggPTwUeyswQWjMGXEAAAJqSURBVPpef366gV8rPCuddp9pYPGLkry7HrEx4+RgoTUo
+YbohU5zzs/FBLMjLfpPBgtFcXISeKK4Vnt+3OMEWh159qvTy44oJ0ntIJxxUYKUVoNu7nOEMjs5e
+YXcDOmJjmHHC1/F5G9rdkItWv6EKfsXM+3MMs80srsR1d3hnAxWMm9LKg5WTh3TOTGDUM++PMGgM
+9PrA4VH8adiKKa3m6Ye2UUjuwhMvAbBganNLK45YSdjJuXg/hh97+Z4QXjYTLDgY3iXQ/QQT6Mxx
+7wS8PFn08ln+fhI7OedmJo5wUjD0fixmmLRss244nhey2ccJW3jwfqwEfr/OyCU9wv21CNalEcwg
+8wZDaacQY59yiE/NmcBWITznt5Wxi2DBACJsQhH3Y/GnmSi968SGkLu8aD9WjrSM0h9veAjsx7Lz
+82z8Nq74wGlmgZXGzBW/AZsYKbkS92PF4xiBs4qWxUPkXvaFBCMcsEpy87Aod1ruLJlbwG/HlO0w
+hMcKln4oZDdNuXmBT+dONm8XKcqYdhbCljdLq2sFvMoFS/mOBHU5c6UAsi53ssiR+jTzBDaUt7Ss
+SbwJzSmTdH8+93GYX1TlCE4uUygDvZyn9nKUwSrJqZLePZO7tNsrtHUYdTDuTG9IL/tkYBAvORnu
+eff6Zb0qSo/OcADM3Pfu1VHWq3fAr2djlNlXudQXdCTYjV4L6uCodfEG97RwSL7nXa2zPwKwqFCJ
+mlCwqFCwqFCwqFCwqFChYFGhYFGhYFGhQsGiQsGiQsGiQoWCRYWCRYWCRYUKBYsKBYsKBYsKFQoW
+FQoWFQoWFSoULCqXq/w/gbudjI6bMwYAAAAASUVORK5CYII=
diff --git a/Documentation/DocBook/media/crop.gif.b64 b/Documentation/DocBook/media/crop.gif.b64
new file mode 100644
index 00000000000..11d936ae72e
--- /dev/null
+++ b/Documentation/DocBook/media/crop.gif.b64
@@ -0,0 +1,105 @@
+R0lGODlhuQJGAeMAAAAAAH9/fwCvAP8AANEA0dEAAK8Ar////wCOAAAA0QAA////////////////
+/////ywAAAAAuQJGAQAE/vDISau9OOvNu/9gKI5kaZ5oqq5s675wLM90bd94ru987//AoHBILBqP
+yKRyyWw6n9CodEqtWq/YrHbL7Xq/4LB4TC6bz+i0es1uu9/wuHxOr9vv+Lx+z+/7/4CBgoOEhYaH
+iImKi4yNjo+QkZKTlJWWl5iZmpucnZ6foKGio6SlpqeoqaqrrK2ur7CxsrO0tba3uLm6gQC9vr/A
+wcLDxMXGx8jJysvMzc7P0NHS09TV1tfYxbth2d3e3+DRAePk5ebn6Onl4ezt7u3q8fLqANtg7/j5
++s/z/f4B+wIKHAjsn8F09ex5IciwobuDEM1Bi0ixosWLGDNqrJhQIZdk/htDihxJsiTJiSZTqlzJ
+MmNHj1q+tRznsKbNmzhzDoz3EiYWmTN7+vQJgOfQmN5mAjzKtCg9pj+TBoU61ClCqlaAthSKVZdV
+dFy7NtHKMqxYW1/PmT2bhOzKtWxlpZUYF4pblXDrvpq7Tq+Tu+UGCB5MuLDhw4gTK17MuLHjx5Aj
+S55MubLly5gza95MmVxev0EAkxsg8jNoVXNJ0zy9RPQ41RtNsz6V2vPstlLTwdYo+zap2qt9G3Ed
+YLdL4bGAL0VOhLhxjL2Zf1IeXboM56Wtt6KuPXRudM8vVu+eiTt5H9hDjj9vyfyIXrTW80gfO4OC
++/jz69/Pv7///wAG/ijggAQWaOCBCCao4IIMNujggRe4J4IwBxBg4YUYZqjhhhx26OGHIIYo4ogk
+loihMBbi1k084VlklgLsWQKjBRJqgIwEBJRyY4UqZsNidhjMGOMkQlLgnjERwkdBjuVpk2QFTB5B
+H2/2DUlJkRNYhWQKUTKyJQpdFjHlcUFaSaQxo9nGQph/fCkDm0OMCV2VZh7iZpbnwCYfBnDKcecO
+fXq3ojotckRnnXr8SQGWEtQIphuKEhEoEHKKdygHCUiQ6QEJdDrEphWA2oGo3UXaAaMHOHrCpFmY
+2gSr6H2XJ5AXoHqBp5xyuimpPfCa6we+6uWqCaiqagKsTAxrBbLz/slqTqEUvWgBqLviSqqvnXpq
+rbbZTpDtt9ziSsG3unKraabkltutWMq+UOyswa3A7A/tfjGvDpW6eKm3v+a667i38vvvuQLzW7Cm
+AJ878L/W9ouuR/Xi8O6zasorRMRo3JtDvoaWOe2v4IIc7LUIE4zwtd1Sm7C6KZ8MLsmzYBzExIFV
+rILGJsgcB843cBztvgqHWnKwup5s8rroVivwwEc3DHLR/jKcis5K0JxmvDezQLUePNvgc0TSBix0
+1OuG6nS56nob7ssqp132wuIi7cnWU1j9ms1chkD3IF3X8DVEYe9AtNi37M2F3cXh/WgFhjPSNw1/
+HxS4CS97MPjH/ts5uQfieqbQuCWPzxC5QZPncPnYoXz+BueKY+Bm6J3AHsPo/5TOmup5sB5vxLJv
+0vsLtPtjO1W4D0Kz6r9nknwLwfczvFeam6IAmndjnfcsy2vtbM3qAT2KkhkULwj4SRITIbzLWYx9
+j9j82L3HvyljivzeG1tC9qCzf4379cEPigACCAYAB0jAAhrwgAhMoAIXyMAGOvCBEIygAVMVDBLo
+Ln1ZWx8SmjeP521CAEYiXypAGML1XHBPF8BfJVToue1drX+1GgUJZTHDFJywBSycRA5PwEF5eFAT
+NYRFEE9wwzXRYoc5c2H1YGgBW32QFkMk1vkoZr3FyQKJJeih/lH894kotsKLFpwi9zB4vSvqzxr8
+oxIXPQHGVbRRBEVUnxk3qMTEvS+GonjjBBCwxwMg4I+d0CMI4pjBOUqpjtACm/c4IUhASuCPfPQj
+I1lAyDLGAosk0OJT1hhIC0RSkpDsoyg9GUpAhtKPp6QAJD9pB0F+oJJWvOQZq5FGMuExFFHkYyR1
+OUpWqrKPvHykJIXZyzy40gOwXNURZ0mNWs6Jk5P0JChXKUxHXsCXwQTlKIe5h2OeSowvRKEFMOkI
+ck4IkbRqogyvaU1uZpOd1URlNXepSnriwZscSOaxlknHQekmnRVwIhAxgM09rtKXBrXnKalJzFTe
+AZ8b0Of9/vh5SH+CB6CLWicPEAoIiGpAoiQwp+OYOQ1nWgqaT0TBQTl6TUN4tH7oEyeUKDocdN5R
+nXnsAUv98FJO2i+kNBWTTZkYUI3SkJLgXKJMlxTU5gxVjbf8HxSRSqOY4rCpcXqqLXGKy6muAKQj
+EOkixPoBTV4FpQOdRU+jiicqkjGWsCCrB8wKlkWm9KhfTaod36pMDVbUR4TC6AQEmom1spGqjLOq
+Ef1aU4uiD6pclapaEWskxcpRlv0E7D9vWtScTjavVXXrUicgV0SUlgN0VYtd04pXFYBVBKc1RGxt
+pNVnsvWwn3WtXju3WEM2VrMX5WxGPdtaG+62dftkrFAd/utWyHa2q7k1bmjHOFocYfVitT3pbTsZ
+XRS8NgSzJUR4XZddfaG1sF7V7XTDeVXlOpW5Y3TucKFbXO8et4p99e1ygfvYrT5XsvUl4n35mlz9
+vpe/zfXvfAEcC8P+t63Uba+BswrfF8p3sEZtMGUhzN7eYvav7QuscDFMXA2DNrGilfCHfxvizRJ1
+wV1Mr3RRHGEPx5Wk0jCpebcbzQBLcb1KVfGNM9vi4L6YxPQ1sXpp3OHLDhnE+xPxkSVAWEw4uMcz
+rmyKbfyK8ZYPwfFVMJIZLMQNN8qyhVzxfovcX9tGNsbdFTCQ91pdHrmXwmC2sJipnOEyn1jLNXZy
+l3Es/g4pX5jPJfbzkgHd5DQ/mcVRdvGhD1DlS1z5rlnmcJC57Aov06i8HeMxphWd6TNvWdCdJjRK
+JL1nSvf5FZdGNJM3jepWeJpxoP7Zea0sY/vOmbe1ZsWtS5jnJU660paINXr/rGk6C3nQRI60kY/9
+alco+7sgGLYftN2oXCty15butZxn7WxO21rV/DB0q5FdCWXzmtmmDrSjoQ1lNKrbzQ/GrY9LgO0P
+cJsP/04tXcCdbHH/mNzAnneqo21vVuMbxvpWcqlThWZLPnrN0m6zdt8ccVL7GuHIneidsVthY6+7
+2l80M8VPrfBzM5yW9954vrm77zD+OuRAHbmgir1X/monGtYq/2lYr7tzNif44WOGc81H0G8P/HsP
+Afc24Fa77KXDccB1fjrX0O0MHYea4zSX+McZTeuWC5vrzfC6rkXNWrGPm+zlDvYqol7ynp/859YO
+esXhSm9IN3zad0+yx9/e7IRbvO8Y/7vGdwx2LA/+4HA3PN8XXm+YO1zmEA/74/mN9WdT3u+WBzzS
+ZU1moMN75fI+/OcTH/rFf33mjjf9oguP86HrnFJSlxzV3231EDS9A1rPA915nsipE7zdBuf8zfFb
+YDUf2OhhHr2r8Z7y0wsdtkTHfd2Lr/vjU8Ld4bb+3vPrfDxDX8/SZ/f3k29zkDNf5BMmOfEFS3ql
+/rsd8rR/f87jX/SMHx3zSddxsjdx1wde2UcvuUc6uxd+vTdInWduZ/dyzRRzjAd7ozaAY5d/BAZ/
+5Sd/52dy6YdyrHBtDyh3qjB8H2h3IUh9I6h3LKd6Lld5E3h5FZh5sZd34veCkxeDoDeDogeA9SeA
+ODh78dZoMBiBMlhSFPh6NniBQ0iA49d8F/d8/hd9QDh9goeBhFeEZXeEc4d2zKB238Z2VXd/yud+
+G7h/Hdh/ivd/NRiAmqeF+MeFcWd2XyiBSkiDTAiHN1h9RIh6RriDSNiDefiDbxiEcfiEGUiHkkd+
+U2h+VYh+V6h+kyBBlniJmJiJmriJluiCqSeI/neYhDm2hGvXeJzgCzEjQkxXgnZ4gmC4DGJofGS4
+CcAAC7XYfpFXe9h3ewi4ffSHhfGjiqvwC2eYi/pne/ynffM3YoiYOqhoi894dcuXhsi4hsqYgtyn
+gN5XHt1mi93oe6zoha6Ih6Ooh6VogTpSZ+3RG7/HAcGHBygYiSA4idCYisgUjqA4jqJYaOY4hqY4
+NepYCcI4cwWYbQcYK77IjMBYj3KxFu24Ae94B/HYhlZ4iAuZHAFJCQP5kBoQkXYwka3nhnvYjAyJ
+kWBXkP52kD0gcH2xjQBpj3CIkk6nks2SkFN2kWiRkZOgJByZAR5ZByDpg653jk1YCwM5jADQ/pN8
+QpM7wJIhR4l7oZOSoIoyCXxMiS8JWDsLaJRS+QgwQj5V6Y5XuTFZKTxbmZOvICRKEpYQOZY44JTv
+B5Xx0ZWKgCW+EIUc+IgeKI8qSI9YcZSiUCxp0YhSiHhUSJGSaJFyWTh0WQjv0guB6IiGCYmIOY+K
+GReA2QnHUxSEmZeTuZeV2ZeXWReZqQl2A5nHuIvJ2IvLeJOLuQ2leQmcA5lZ55Y9U5bOc5ZHEZtX
+cl+8mZK8iJCt6XO305h6cEK/KZbBuZK42UG6STzGeQdFlJw+aZte05w+9Jx/GZ10QEjUOU7W6TfY
+uUWzKCzcGQew9J2kFZ6QM56bVJ5+oZ6E/qBP6vmTdBCUhTiU/oiOtyGfgQBS1Gmfc4Cf5WiII4mT
+0uGffvBavymgckCg/GigRMmH1qGgm4OP5GWVy1mTwxl4Q2KheNB0memgO/OKyhCL3QefzAGiddCO
+R0micAChqyah+1mU58GicsCRwgijbyCj6daPsviPMYKjq4OhZdUTPOoGPtp1pFijFGomRMoGSvmN
+draawomNv/iaCXqeh2Ok51Sl1siaWKqQWlqhXJoFU4pr7Ck67nlWKgqlZ2oFaQolUZo/5Bih+hmk
+/IkoIfQHc8pUFKSXbBiSFXmgZcoedQoGf7qeWRKngrCkadekemqjfPokx+mlakilqQCp/mEoqSkq
+pJWaoSGKqdXYp5tqoiDhqdr4pqFqqi1KqqppqabAqbCoqlrpkq3aqK86jbW5AYlqWqiKDCi6qqCa
+q7Q1B4tqXR3wq4VAqydqq2aJq8bqqm6QrGCKWo4KlMF6DMN6q6w6rbIqpbBqgHqTrQ+6rdQDpJ+6
+p+C6rObqA9baNcy6behaDN0ard/arqKaBvGaRJzgrKmqrsTKrvo6V++aA/3KQwebBgArrNCam9Ja
+sPtKBgmLAvMqkfVKDPcKsfkqscdKseNqkCtwsfeZscOwsc4ZsR4bPgsbAxU7si0bBg3LrQ+bsh27
+sr4asy3wstojCTObrjQ6qU+Ks/7q/gU8yzw6uwU/a681m50qS7Q52wVH6wIkuwZLq7FNS57FCrVZ
+lLTFqIG92p4jdaczmqfrSqlcq7BoGrLAeZ2KcLUnm7XvubVpW7RVMLVsCqxk+6NBe7ZDW7cqULUu
+y7Yz2ZRe+wRwKwwo67Q3C7jlWjeEq6HNIl4mq7hy66Z067gWe7gwpYOSiZWPWrnBsLhaS7CaG7ic
+e5J4manMCQiJO7qXW1dPe7pfygR4O7l98LoFEbuqNbu0W7tJcLutC3Wiu7sC662Z+7swG7yRq5w1
+tXV7y6THi6/Jq7zLawTCi3vwWLy/QLpza7rWS7U6m73e8ZHce5e8O3CNG76bOwTk/otdJRu9kTq9
+HFu97Iu0M9O8bfkEgvsq54ua9Guz9nu/+Auv+tuRUtC/SqC73Zu+Lbm+BIy6PfC+h6Sk/8sXiWmo
+EQy/OkDBdMQGDIy+Acy4A7zBwHOeHowbahDCANy3A4u2JnybN5DCSqDAQcDCGGyZGhzDTlUDNNwa
+qQuB18iX2Yi84MvDbisDP5wsQSyOV0rEWYrEFQwDSzwWTVyYlEmoGTyhJCnFCOguB1yd3HDFpXqY
+WqzDXIygXly+nhiZWNwFNmwDOOy9mHvEa0yWOfiJn/sFcTwDc+zAT3nHQAyFnvvG90DGzkuIBWq2
+L/y3gqy9cwiIXZiPfIzIYryP/mUrkml8qI8snl/LiLpIrmrQx0IsplBMpp38F+NRxUhBBX88wqUL
+w6nMxq8Uxkv5BqS8x4MqlJrspF08y897j7zqeWuQy6ybxbxcqJsMzFEQm6xcyU7wyi5sxLLMzFkV
+UbacQnZgzG2ryHjay0L7y9b8wT61umXsJ6krzYxMzY48zlNMkOYcq9t8uOoMzn4rzu6swpnHlgi8
+B9x8y5jMt+tMvXaczz2MiPx8yf4cs/WszL6sxgatyjiZ0ADdB//MqAEtvdNM0NUc0eSMhmHbJu/a
+0Fv80Jzs0T8wPT1B0do8CNxM0mhs0ih9BTMCPiwNnoWQyzAtmjs801RQJPBx/tMzZSdcutNFzNHt
+7NNHwCgtPMm6zAvcadRRrNSQ+2lf0ZnHnNPGKdWoTNVSMDGoidXnTNQ0wNWu6dVfDU69INbyvAgX
+a9bEidZOgDioGdKOwKxw7aFybbvHFY2tmAiJmtcruNdNgJyl7NbVJdh+Sdh8Pcw4yiwGMAGRbQCU
+jQGRnQKXvQWPfcF0LLsQzNg+XIIgiiyVLQGUfdmZTQGpbQKr3cpPbcqhedT1W9CgjbDhqKBsktmT
+XdoHkNqtXdqnLdm7fdqVTdy7PcaGPMSxPdW1zbzD/GnHPNmm3duSXd0XIN3TTd3ajdoVwN1iIJ+K
+PZrNjQQS9Z1wIt3GPd28/m0B2L3d2e3dxJ3dY2DenA3IcTnezg3SUdvNwu3b1d3aqt3b8P3e6m3d
+AH7IIpvR87vRs93R+D3D48qbfbLaup3e7G3avD3g1G3c7W0GEl7fsPy9Dv7gof3c7prIolCa4d3T
+JO6+kQuYssPhgL0WK77MLU4ED7mWQ40KOg6oCt6pIV7HI37jg2vi50Q+SVoGxIjR3pzJDh3OEE3k
+tm3kR94RSa7k0VjjMi3l+Uvl5fqMV04GFaTlUH7SXL6FklyH/hrmZ+ALZH7PUX7mJa7fa2Iidn7n
+eJ7ner7nJgLiDC7AtC3neezG9wuXG2jmgr6KXh7Bhv5DiT4D1qqvja6d/o/+h0K9spPuu5UujXTO
+w5n+2ZsOjotOwJ9ewqGOi2ArxaUe6Keu6J0ew6s+5K3u6sZIjdYb60k962h+6R6L6/is64uY5myt
+vL4e58Ae7LwuscWO6Me+XclesMve7EqczUQb7dJOxdSOs9Z+7S4Q6e267dzexk5N6m3q2aYe7uVc
+yIVe7r0L6ugek/FM7OyuvudurAUgAfd+AAWw7z+Q7yfg79806utuk3F9uvyu7/qe7wCvAwtPAg3/
+UdmO6fP+wPVuJf5+7/uu8BXw8BmP8QrP7x0/AR0/8gl/8CKf8fhu8hpf8h4P8iHfuXpM7gAw8wBQ
+8zZ/8zif8zrf2e1e/vEWj/AIv/L4fgEXD/QXX/RFL/JAv/RLr/JDb/Qpr/QmD/ECz746f/VYj/U8
+T++sjigYz/Jfn/AYsPBC7/Rkj/JJ//Ri//Qr//FKz/JU/+omnPV0X/dbT/FdXyco//ZCbwEHH/Z/
+//drb/Z9H/htz/Ypr/Fp7+zx/rt1//hXf/eB7LhkP/Qk7/eCn/hwr/kjf/lBv/d7v/mKj/ahn+4x
+P/CQn/o5zNM2jtIPnwGvvwPeDq6qX/uSf99I3PkeEPtE7+JVH761r/q3f+g+zft+7/tyv8HBn/rD
+7+jvLurJz+jL//jNT+nPb/qEbvXTb/f2fegP8v3gH/7iP/7kX/7m/n/+6D/707r93K8bnPH+8B//
+8j//9F//9n//+E//oez47J/1SmHJEHDkpNVenPXm3X8wFEeyNM8RCFa2BVA4lme6tm8g13e+9/lW
+UDgkFgOvW1K5ZDadT6hSVURGrVdsdvnjdntGcHhY1ZbNZ3Ra3ZkSyWt4XF7z1rtivNi+5/f9f8BA
+wUHCQsNDxETFHaO3uUfISDa7vErLS8xMzU3OTr1Az1DRUdJS0yBHSdXVyL3TV9hY2dmjRdtb3NxB
+2iNW3985XeFh4mLjY+Rk5WUeYOdn6Gjpaepq62vsbO1t7m7vb/Bw8XHycvNz9HT1dfZ293f4ePl5
++nr7e/x8/X3+G37/f4ABBQ4kWNDgQYQJFS5k2NDhQ4gRJdKLAAA7
diff --git a/Documentation/DocBook/dvb/.gitignore b/Documentation/DocBook/media/dvb/.gitignore
index d7ec32eafac..d7ec32eafac 100644
--- a/Documentation/DocBook/dvb/.gitignore
+++ b/Documentation/DocBook/media/dvb/.gitignore
diff --git a/Documentation/DocBook/dvb/audio.xml b/Documentation/DocBook/media/dvb/audio.xml
index eeb96b8a086..d6438623720 100644
--- a/Documentation/DocBook/dvb/audio.xml
+++ b/Documentation/DocBook/media/dvb/audio.xml
@@ -14,17 +14,17 @@ the omission of the audio and video device.
 audio device.
 </para>
 
-<section id="audio_stream_source_t">
+<section id="audio-stream-source-t">
 <title>audio_stream_source_t</title>
 <para>The audio stream source is set through the AUDIO_SELECT_SOURCE call and can take
 the following values, depending on whether we are replaying from an internal (demux) or
 external (user write) source.
 </para>
 <programlisting>
- typedef enum {
-	 AUDIO_SOURCE_DEMUX,
-	 AUDIO_SOURCE_MEMORY
- } audio_stream_source_t;
+typedef enum {
+	AUDIO_SOURCE_DEMUX,
+	AUDIO_SOURCE_MEMORY
+} audio_stream_source_t;
 </programlisting>
 <para>AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the
 DVR device) as the source of the video stream. If AUDIO_SOURCE_MEMORY
@@ -33,61 +33,64 @@ call.
 </para>
 
 </section>
-<section id="audio_play_state_t">
+<section id="audio-play-state-t">
 <title>audio_play_state_t</title>
 <para>The following values can be returned by the AUDIO_GET_STATUS call representing the
 state of audio playback.
 </para>
 <programlisting>
- typedef enum {
-	 AUDIO_STOPPED,
-	 AUDIO_PLAYING,
-	 AUDIO_PAUSED
- } audio_play_state_t;
+typedef enum {
+	AUDIO_STOPPED,
+	AUDIO_PLAYING,
+	AUDIO_PAUSED
+} audio_play_state_t;
 </programlisting>
 
 </section>
-<section id="audio_channel_select_t">
+<section id="audio-channel-select-t">
 <title>audio_channel_select_t</title>
 <para>The audio channel selected via AUDIO_CHANNEL_SELECT is determined by the
 following values.
 </para>
 <programlisting>
- typedef enum {
-	 AUDIO_STEREO,
-	 AUDIO_MONO_LEFT,
-	 AUDIO_MONO_RIGHT,
- } audio_channel_select_t;
+typedef enum {
+	AUDIO_STEREO,
+	AUDIO_MONO_LEFT,
+	AUDIO_MONO_RIGHT,
+	AUDIO_MONO,
+	AUDIO_STEREO_SWAPPED
+} audio_channel_select_t;
 </programlisting>
 
 </section>
-<section id="struct_audio_status">
+<section id="audio-status">
 <title>struct audio_status</title>
 <para>The AUDIO_GET_STATUS call returns the following structure informing about various
 states of the playback operation.
 </para>
 <programlisting>
- typedef struct audio_status {
-	 boolean AV_sync_state;
-	 boolean mute_state;
-	 audio_play_state_t play_state;
-	 audio_stream_source_t stream_source;
-	 audio_channel_select_t channel_select;
-	 boolean bypass_mode;
- } audio_status_t;
+typedef struct audio_status {
+	boolean AV_sync_state;
+	boolean mute_state;
+	audio_play_state_t play_state;
+	audio_stream_source_t stream_source;
+	audio_channel_select_t channel_select;
+	boolean bypass_mode;
+	audio_mixer_t mixer_state;
+} audio_status_t;
 </programlisting>
 
 </section>
-<section id="struct_audio_mixer">
+<section id="audio-mixer">
 <title>struct audio_mixer</title>
 <para>The following structure is used by the AUDIO_SET_MIXER call to set the audio
 volume.
 </para>
 <programlisting>
- typedef struct audio_mixer {
-	 unsigned int volume_left;
-	 unsigned int volume_right;
- } audio_mixer_t;
+typedef struct audio_mixer {
+	unsigned int volume_left;
+	unsigned int volume_right;
+} audio_mixer_t;
 </programlisting>
 
 </section>
@@ -109,17 +112,17 @@ bits set according to the hardwares capabilities.
 </programlisting>
 
 </section>
-<section id="struct_audio_karaoke">
+<section id="audio-karaoke">
 <title>struct audio_karaoke</title>
 <para>The ioctl AUDIO_SET_KARAOKE uses the following format:
 </para>
 <programlisting>
- typedef
- struct audio_karaoke{
-	 int vocal1;
-	 int vocal2;
-	 int melody;
- } audio_karaoke_t;
+typedef
+struct audio_karaoke {
+	int vocal1;
+	int vocal2;
+	int melody;
+} audio_karaoke_t;
 </programlisting>
 <para>If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t at 70% each. If both,
 Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed into the left channel and Vocal2 into the
@@ -128,7 +131,7 @@ and right.
 </para>
 
 </section>
-<section id="audio_attributes">
+<section id="audio-attributes-t">
 <title>audio attributes</title>
 <para>The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES:
 </para>
@@ -217,8 +220,7 @@ and right.
 <para>(blocking mode is the default)</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>ENODEV</para>
@@ -228,13 +230,6 @@ and right.
 </entry>
  </row><row><entry
  align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EBUSY</para>
 </entry><entry
  align="char">
@@ -276,8 +271,7 @@ and right.
 <para>File descriptor returned by a previous call to open().</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EBADF</para>
@@ -332,8 +326,7 @@ and right.
 <para>Size of buf.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EPERM</para>
@@ -358,7 +351,7 @@ and right.
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="AUDIO_STOP"
 role="subsection"><title>AUDIO_STOP</title>
 <para>DESCRIPTION
 </para>
@@ -391,25 +384,9 @@ role="subsection"><title>AUDIO_STOP</title>
 <para>Equals AUDIO_STOP for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_PLAY"
 role="subsection"><title>AUDIO_PLAY</title>
 <para>DESCRIPTION
 </para>
@@ -443,25 +420,9 @@ role="subsection"><title>AUDIO_PLAY</title>
 <para>Equals AUDIO_PLAY for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_PAUSE"
 role="subsection"><title>AUDIO_PAUSE</title>
 <para>DESCRIPTION
 </para>
@@ -503,25 +464,49 @@ role="subsection"><title>AUDIO_PAUSE</title>
 <para>Equals AUDIO_PAUSE for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
+&return-value-dvb;
+
+</section><section id="AUDIO_CONTINUE"
+role="subsection"><title>AUDIO_CONTINUE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl restarts the decoding and playing process previously paused
+with AUDIO_PAUSE command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>It only works if the stream were previously stopped with AUDIO_PAUSE</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = AUDIO_CONTINUE);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
 </para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
+<para>int fd</para>
 </entry><entry
  align="char">
-<para>fd is not a valid open file descriptor.</para>
+<para>File descriptor returned by a previous call to open().</para>
 </entry>
  </row><row><entry
  align="char">
-<para>EINTERNAL</para>
+<para>int request</para>
 </entry><entry
  align="char">
-<para>Internal error.</para>
+<para>Equals AUDIO_CONTINUE for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SELECT_SOURCE"
 role="subsection"><title>AUDIO_SELECT_SOURCE</title>
 <para>DESCRIPTION
 </para>
@@ -567,32 +552,9 @@ role="subsection"><title>AUDIO_SELECT_SOURCE</title>
  stream.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal input parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SET_MUTE"
 role="subsection"><title>AUDIO_SET_MUTE</title>
 <para>DESCRIPTION
 </para>
@@ -646,32 +608,9 @@ role="subsection"><title>AUDIO_SET_MUTE</title>
 <para>FALSE Audio Un-mute</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal input parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SET_AV_SYNC"
 role="subsection"><title>AUDIO_SET_AV_SYNC</title>
 <para>DESCRIPTION
 </para>
@@ -725,32 +664,9 @@ role="subsection"><title>AUDIO_SET_AV_SYNC</title>
 <para>FALSE AV-sync OFF</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal input parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SET_BYPASS_MODE"
 role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
 <para>DESCRIPTION
 </para>
@@ -808,32 +724,9 @@ role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
 <para>FALSE Bypass is enabled</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal input parameter.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_CHANNEL_SELECT"
 role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
 <para>DESCRIPTION
 </para>
@@ -877,32 +770,9 @@ role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
  stereo).</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal input parameter ch.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_GET_STATUS"
 role="subsection"><title>AUDIO_GET_STATUS</title>
 <para>DESCRIPTION
 </para>
@@ -945,32 +815,9 @@ role="subsection"><title>AUDIO_GET_STATUS</title>
 <para>Returns the current state of Audio Device.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>status points to invalid address.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_GET_CAPABILITIES"
 role="subsection"><title>AUDIO_GET_CAPABILITIES</title>
 <para>DESCRIPTION
 </para>
@@ -1013,32 +860,9 @@ role="subsection"><title>AUDIO_GET_CAPABILITIES</title>
 <para>Returns a bit array of supported sound formats.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>cap points to an invalid address.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_CLEAR_BUFFER"
 role="subsection"><title>AUDIO_CLEAR_BUFFER</title>
 <para>DESCRIPTION
 </para>
@@ -1072,25 +896,9 @@ role="subsection"><title>AUDIO_CLEAR_BUFFER</title>
 <para>Equals AUDIO_CLEAR_BUFFER for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SET_ID"
 role="subsection"><title>AUDIO_SET_ID</title>
 <para>DESCRIPTION
 </para>
@@ -1136,32 +944,9 @@ role="subsection"><title>AUDIO_SET_ID</title>
 <para>audio sub-stream id</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Invalid sub-stream id.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SET_MIXER"
 role="subsection"><title>AUDIO_SET_MIXER</title>
 <para>DESCRIPTION
 </para>
@@ -1202,32 +987,9 @@ role="subsection"><title>AUDIO_SET_MIXER</title>
 <para>mixer settings.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>mix points to an invalid address.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="AUDIO_SET_STREAMTYPE"
 role="subsection"><title>AUDIO_SET_STREAMTYPE</title>
 <para>DESCRIPTION
 </para>
@@ -1270,17 +1032,9 @@ role="subsection"><title>AUDIO_SET_STREAMTYPE</title>
 <para>stream type</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1288,7 +1042,7 @@ role="subsection"><title>AUDIO_SET_STREAMTYPE</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="AUDIO_SET_EXT_ID"
 role="subsection"><title>AUDIO_SET_EXT_ID</title>
 <para>DESCRIPTION
 </para>
@@ -1330,17 +1084,9 @@ role="subsection"><title>AUDIO_SET_EXT_ID</title>
 <para>audio sub_stream_id</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1348,7 +1094,7 @@ role="subsection"><title>AUDIO_SET_EXT_ID</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="AUDIO_SET_ATTRIBUTES"
 role="subsection"><title>AUDIO_SET_ATTRIBUTES</title>
 <para>DESCRIPTION
 </para>
@@ -1391,17 +1137,9 @@ role="subsection"><title>AUDIO_SET_ATTRIBUTES</title>
 <para>audio attributes according to section ??</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1409,7 +1147,7 @@ role="subsection"><title>AUDIO_SET_ATTRIBUTES</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="AUDIO_SET_KARAOKE"
 role="subsection"><title>AUDIO_SET_KARAOKE</title>
 <para>DESCRIPTION
 </para>
@@ -1422,7 +1160,7 @@ role="subsection"><title>AUDIO_SET_KARAOKE</title>
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(fd, int request = AUDIO_SET_STREAMTYPE,
+<para>int ioctl(fd, int request = AUDIO_SET_KARAOKE,
  audio_karaoke_t &#x22C6;karaoke);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1440,7 +1178,7 @@ role="subsection"><title>AUDIO_SET_KARAOKE</title>
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals AUDIO_SET_STREAMTYPE for this
+<para>Equals AUDIO_SET_KARAOKE for this
  command.</para>
 </entry>
  </row><row><entry
@@ -1452,17 +1190,9 @@ role="subsection"><title>AUDIO_SET_KARAOKE</title>
 <para>karaoke settings according to section ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
diff --git a/Documentation/DocBook/dvb/ca.xml b/Documentation/DocBook/media/dvb/ca.xml
index b1f1d2fad65..5c4adb44b1c 100644
--- a/Documentation/DocBook/dvb/ca.xml
+++ b/Documentation/DocBook/media/dvb/ca.xml
@@ -8,75 +8,85 @@ including <emphasis role="tt">linux/dvb/ca.h</emphasis> in your application.
 <title>CA Data Types</title>
 
 
-<section id="ca_slot_info_t">
+<section id="ca-slot-info">
 <title>ca_slot_info_t</title>
  <programlisting>
- /&#x22C6; slot interface types and info &#x22C6;/
+typedef struct ca_slot_info {
+	int num;               /&#x22C6; slot number &#x22C6;/
 
- typedef struct ca_slot_info_s {
-	 int num;               /&#x22C6; slot number &#x22C6;/
+	int type;              /&#x22C6; CA interface this slot supports &#x22C6;/
+#define CA_CI            1     /&#x22C6; CI high level interface &#x22C6;/
+#define CA_CI_LINK       2     /&#x22C6; CI link layer level interface &#x22C6;/
+#define CA_CI_PHYS       4     /&#x22C6; CI physical layer level interface &#x22C6;/
+#define CA_DESCR         8     /&#x22C6; built-in descrambler &#x22C6;/
+#define CA_SC          128     /&#x22C6; simple smart card interface &#x22C6;/
 
-	 int type;           /&#x22C6; CA interface this slot supports &#x22C6;/
- #define CA_CI            1  /&#x22C6; CI high level interface &#x22C6;/
- #define CA_CI_LINK       2  /&#x22C6; CI link layer level interface &#x22C6;/
- #define CA_CI_PHYS       4  /&#x22C6; CI physical layer level interface &#x22C6;/
- #define CA_SC          128  /&#x22C6; simple smart card interface &#x22C6;/
-
-	 unsigned int flags;
- #define CA_CI_MODULE_PRESENT 1 /&#x22C6; module (or card) inserted &#x22C6;/
- #define CA_CI_MODULE_READY   2
- } ca_slot_info_t;
+	unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /&#x22C6; module (or card) inserted &#x22C6;/
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
 </programlisting>
 
 </section>
-<section id="ca_descr_info_t">
+<section id="ca-descr-info">
 <title>ca_descr_info_t</title>
- <programlisting>
- typedef struct ca_descr_info_s {
-	 unsigned int num;  /&#x22C6; number of available descramblers (keys) &#x22C6;/
-	 unsigned int type; /&#x22C6; type of supported scrambling system &#x22C6;/
- #define CA_ECD           1
- #define CA_NDS           2
- #define CA_DSS           4
- } ca_descr_info_t;
+<programlisting>
+typedef struct ca_descr_info {
+	unsigned int num;  /&#x22C6; number of available descramblers (keys) &#x22C6;/
+	unsigned int type; /&#x22C6; type of supported scrambling system &#x22C6;/
+#define CA_ECD           1
+#define CA_NDS           2
+#define CA_DSS           4
+} ca_descr_info_t;
 </programlisting>
 
 </section>
-<section id="ca_cap_t">
-<title>ca_cap_t</title>
- <programlisting>
- typedef struct ca_cap_s {
-	 unsigned int slot_num;  /&#x22C6; total number of CA card and module slots &#x22C6;/
-	 unsigned int slot_type; /&#x22C6; OR of all supported types &#x22C6;/
-	 unsigned int descr_num; /&#x22C6; total number of descrambler slots (keys) &#x22C6;/
-	 unsigned int descr_type;/&#x22C6; OR of all supported types &#x22C6;/
+<section id="ca-caps">
+<title>ca_caps_t</title>
+<programlisting>
+typedef struct ca_caps {
+	unsigned int slot_num;  /&#x22C6; total number of CA card and module slots &#x22C6;/
+	unsigned int slot_type; /&#x22C6; OR of all supported types &#x22C6;/
+	unsigned int descr_num; /&#x22C6; total number of descrambler slots (keys) &#x22C6;/
+	unsigned int descr_type;/&#x22C6; OR of all supported types &#x22C6;/
  } ca_cap_t;
 </programlisting>
 
 </section>
-<section id="ca_msg_t">
+<section id="ca-msg">
 <title>ca_msg_t</title>
- <programlisting>
- /&#x22C6; a message to/from a CI-CAM &#x22C6;/
- typedef struct ca_msg_s {
-	 unsigned int index;
-	 unsigned int type;
-	 unsigned int length;
-	 unsigned char msg[256];
- } ca_msg_t;
+<programlisting>
+/&#x22C6; a message to/from a CI-CAM &#x22C6;/
+typedef struct ca_msg {
+	unsigned int index;
+	unsigned int type;
+	unsigned int length;
+	unsigned char msg[256];
+} ca_msg_t;
 </programlisting>
 
 </section>
-<section id="ca_descr_t">
+<section id="ca-descr">
 <title>ca_descr_t</title>
- <programlisting>
- typedef struct ca_descr_s {
-	 unsigned int index;
-	 unsigned int parity;
-	 unsigned char cw[8];
- } ca_descr_t;
+<programlisting>
+typedef struct ca_descr {
+	unsigned int index;
+	unsigned int parity;
+	unsigned char cw[8];
+} ca_descr_t;
 </programlisting>
- </section></section>
+</section>
+
+<section id="ca-pid">
+<title>ca-pid</title>
+<programlisting>
+typedef struct ca_pid {
+	unsigned int pid;
+	int index;		/&#x22C6; -1 == disable&#x22C6;/
+} ca_pid_t;
+</programlisting>
+</section></section>
+
 <section id="ca_function_calls">
 <title>CA Function Calls</title>
 
@@ -148,8 +158,7 @@ including <emphasis role="tt">linux/dvb/ca.h</emphasis> in your application.
 <para>(blocking mode is the default)</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>ENODEV</para>
@@ -207,8 +216,7 @@ including <emphasis role="tt">linux/dvb/ca.h</emphasis> in your application.
 <para>File descriptor returned by a previous call to open().</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EBADF</para>
diff --git a/Documentation/DocBook/dvb/demux.xml b/Documentation/DocBook/media/dvb/demux.xml
index 1b8c4e9835b..37c17908aa4 100644
--- a/Documentation/DocBook/dvb/demux.xml
+++ b/Documentation/DocBook/media/dvb/demux.xml
@@ -7,15 +7,19 @@ accessed by including <emphasis role="tt">linux/dvb/dmx.h</emphasis> in your app
 <section id="dmx_types">
 <title>Demux Data Types</title>
 
-<section id="dmx_output_t">
+<section id="dmx-output-t">
 <title>dmx_output_t</title>
- <programlisting>
- typedef enum
- {
-	 DMX_OUT_DECODER,
-	 DMX_OUT_TAP,
-	 DMX_OUT_TS_TAP
- } dmx_output_t;
+<programlisting>
+typedef enum
+{
+	DMX_OUT_DECODER, /&#x22C6; Streaming directly to decoder. &#x22C6;/
+	DMX_OUT_TAP,     /&#x22C6; Output going to a memory buffer &#x22C6;/
+			 /&#x22C6; (to be retrieved via the read command).&#x22C6;/
+	DMX_OUT_TS_TAP,  /&#x22C6; Output multiplexed into a new TS  &#x22C6;/
+			 /&#x22C6; (to be retrieved by reading from the &#x22C6;/
+			 /&#x22C6; logical DVR device).                 &#x22C6;/
+	DMX_OUT_TSDEMUX_TAP /&#x22C6; Like TS_TAP but retrieved from the DMX device &#x22C6;/
+} dmx_output_t;
 </programlisting>
 <para><emphasis role="tt">DMX_OUT_TAP</emphasis> delivers the stream output to the demux device on which the ioctl is
 called.
@@ -26,96 +30,95 @@ specified.
 </para>
 </section>
 
-<section id="dmx_input_t">
+<section id="dmx-input-t">
 <title>dmx_input_t</title>
- <programlisting>
- typedef enum
- {
-	 DMX_IN_FRONTEND,
-	 DMX_IN_DVR
- } dmx_input_t;
+<programlisting>
+typedef enum
+{
+	DMX_IN_FRONTEND, /&#x22C6; Input from a front-end device.  &#x22C6;/
+	DMX_IN_DVR       /&#x22C6; Input from the logical DVR device.  &#x22C6;/
+} dmx_input_t;
 </programlisting>
 </section>
 
-<section id="dmx_pes_type_t">
+<section id="dmx-pes-type-t">
 <title>dmx_pes_type_t</title>
- <programlisting>
- typedef enum
- {
-	 DMX_PES_AUDIO,
-	 DMX_PES_VIDEO,
-	 DMX_PES_TELETEXT,
-	 DMX_PES_SUBTITLE,
-	 DMX_PES_PCR,
-	 DMX_PES_OTHER
- } dmx_pes_type_t;
-</programlisting>
-</section>
+<programlisting>
+typedef enum
+{
+	DMX_PES_AUDIO0,
+	DMX_PES_VIDEO0,
+	DMX_PES_TELETEXT0,
+	DMX_PES_SUBTITLE0,
+	DMX_PES_PCR0,
 
-<section id="dmx_event_t">
-<title>dmx_event_t</title>
- <programlisting>
- typedef enum
- {
-	 DMX_SCRAMBLING_EV,
-	 DMX_FRONTEND_EV
- } dmx_event_t;
-</programlisting>
-</section>
+	DMX_PES_AUDIO1,
+	DMX_PES_VIDEO1,
+	DMX_PES_TELETEXT1,
+	DMX_PES_SUBTITLE1,
+	DMX_PES_PCR1,
 
-<section id="dmx_scrambling_status_t">
-<title>dmx_scrambling_status_t</title>
- <programlisting>
- typedef enum
- {
-	 DMX_SCRAMBLING_OFF,
-	 DMX_SCRAMBLING_ON
- } dmx_scrambling_status_t;
+	DMX_PES_AUDIO2,
+	DMX_PES_VIDEO2,
+	DMX_PES_TELETEXT2,
+	DMX_PES_SUBTITLE2,
+	DMX_PES_PCR2,
+
+	DMX_PES_AUDIO3,
+	DMX_PES_VIDEO3,
+	DMX_PES_TELETEXT3,
+	DMX_PES_SUBTITLE3,
+	DMX_PES_PCR3,
+
+	DMX_PES_OTHER
+} dmx_pes_type_t;
 </programlisting>
 </section>
 
-<section id="dmx_filter">
+<section id="dmx-filter">
 <title>struct dmx_filter</title>
  <programlisting>
  typedef struct dmx_filter
- {
-	 uint8_t         filter[DMX_FILTER_SIZE];
-	 uint8_t         mask[DMX_FILTER_SIZE];
- } dmx_filter_t;
+{
+	__u8  filter[DMX_FILTER_SIZE];
+	__u8  mask[DMX_FILTER_SIZE];
+	__u8  mode[DMX_FILTER_SIZE];
+} dmx_filter_t;
 </programlisting>
 </section>
 
-<section id="dmx_sct_filter_params">
+<section id="dmx-sct-filter-params">
 <title>struct dmx_sct_filter_params</title>
- <programlisting>
- struct dmx_sct_filter_params
- {
-	 uint16_t            pid;
-	 dmx_filter_t        filter;
-	 uint32_t            timeout;
-	 uint32_t            flags;
- #define DMX_CHECK_CRC       1
- #define DMX_ONESHOT         2
- #define DMX_IMMEDIATE_START 4
- };
+<programlisting>
+struct dmx_sct_filter_params
+{
+	__u16          pid;
+	dmx_filter_t   filter;
+	__u32          timeout;
+	__u32          flags;
+#define DMX_CHECK_CRC       1
+#define DMX_ONESHOT         2
+#define DMX_IMMEDIATE_START 4
+#define DMX_KERNEL_CLIENT   0x8000
+};
 </programlisting>
 </section>
 
-<section id="dmx_pes_filter_params">
+<section id="dmx-pes-filter-params">
 <title>struct dmx_pes_filter_params</title>
- <programlisting>
- struct dmx_pes_filter_params
- {
-	 uint16_t            pid;
-	 dmx_input_t         input;
-	 dmx_output_t        output;
-	 dmx_pes_type_t      pes_type;
-	 uint32_t            flags;
- };
+<programlisting>
+struct dmx_pes_filter_params
+{
+	__u16          pid;
+	dmx_input_t    input;
+	dmx_output_t   output;
+	dmx_pes_type_t pes_type;
+	__u32          flags;
+};
 </programlisting>
 </section>
 
-<section id="dmx_event">
+<section id="dmx-event">
 <title>struct dmx_event</title>
  <programlisting>
  struct dmx_event
@@ -130,19 +133,44 @@ specified.
 </programlisting>
 </section>
 
-<section id="dmx_stc">
+<section id="dmx-stc">
 <title>struct dmx_stc</title>
- <programlisting>
- struct dmx_stc {
-	 unsigned int num;       /&#x22C6; input : which STC? 0..N &#x22C6;/
-	 unsigned int base;      /&#x22C6; output: divisor for stc to get 90 kHz clock &#x22C6;/
-	 uint64_t stc;           /&#x22C6; output: stc in 'base'&#x22C6;90 kHz units &#x22C6;/
- };
+<programlisting>
+struct dmx_stc {
+	unsigned int num;	/&#x22C6; input : which STC? 0..N &#x22C6;/
+	unsigned int base;	/&#x22C6; output: divisor for stc to get 90 kHz clock &#x22C6;/
+	__u64 stc;		/&#x22C6; output: stc in 'base'&#x22C6;90 kHz units &#x22C6;/
+};
 </programlisting>
- </section>
+</section>
 
+<section id="dmx-caps">
+<title>struct dmx_caps</title>
+<programlisting>
+ typedef struct dmx_caps {
+	__u32 caps;
+	int num_decoders;
+} dmx_caps_t;
+</programlisting>
+</section>
+
+<section id="dmx-source-t">
+<title>enum dmx_source_t</title>
+<programlisting>
+typedef enum {
+	DMX_SOURCE_FRONT0 = 0,
+	DMX_SOURCE_FRONT1,
+	DMX_SOURCE_FRONT2,
+	DMX_SOURCE_FRONT3,
+	DMX_SOURCE_DVR0   = 16,
+	DMX_SOURCE_DVR1,
+	DMX_SOURCE_DVR2,
+	DMX_SOURCE_DVR3
+} dmx_source_t;
+</programlisting>
 </section>
 
+</section>
 <section id="dmx_fcalls">
 <title>Demux Function Calls</title>
 
@@ -211,8 +239,7 @@ specified.
 <para>(blocking mode is the default)</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>ENODEV</para>
@@ -271,8 +298,7 @@ specified.
 <para>File descriptor returned by a previous call to open().</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EBADF</para>
@@ -353,8 +379,7 @@ specified.
 <para>Size of buf.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EWOULDBLOCK</para>
@@ -457,8 +482,7 @@ specified.
 <para>Size of buf.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EWOULDBLOCK</para>
@@ -491,7 +515,7 @@ specified.
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="dmx_start">
+<section id="DMX_START">
 <title>DMX_START</title>
 <para>DESCRIPTION
 </para>
@@ -525,17 +549,9 @@ specified.
 <para>Equals DMX_START for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -556,7 +572,7 @@ specified.
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="dmx_stop">
+<section id="DMX_STOP">
 <title>DMX_STOP</title>
 <para>DESCRIPTION
 </para>
@@ -591,19 +607,10 @@ specified.
 <para>Equals DMX_STOP for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
-<section id="dmx_set_filter">
+<section id="DMX_SET_FILTER">
 <title>DMX_SET_FILTER</title>
 <para>DESCRIPTION
 </para>
@@ -654,26 +661,10 @@ specified.
 <para>Pointer to structure containing filter parameters.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Invalid argument.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
-<section id="dmx_set_pes_filter">
+<section id="DMX_SET_PES_FILTER">
 <title>DMX_SET_PES_FILTER</title>
 <para>DESCRIPTION
 </para>
@@ -727,24 +718,9 @@ specified.
 <para>Pointer to structure containing filter parameters.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Invalid argument.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EBUSY</para>
 </entry><entry
  align="char">
@@ -756,7 +732,7 @@ specified.
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="dms_set_buffer_size">
+<section id="DMX_SET_BUFFER_SIZE">
 <title>DMX_SET_BUFFER_SIZE</title>
 <para>DESCRIPTION
 </para>
@@ -799,27 +775,10 @@ specified.
 <para>Size of circular buffer.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOMEM</para>
-</entry><entry
- align="char">
-<para>The driver was not able to allocate a buffer of the
- requested size.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
-<section id="dmx_get_event">
+<section id="DMX_GET_EVENT">
 <title>DMX_GET_EVENT</title>
 <para>DESCRIPTION
 </para>
@@ -872,24 +831,9 @@ specified.
 <para>Pointer to the location where the event is to be stored.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>ev points to an invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EWOULDBLOCK</para>
 </entry><entry
  align="char">
@@ -899,7 +843,7 @@ specified.
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="dmx_get_stc">
+<section id="DMX_GET_STC">
 <title>DMX_GET_STC</title>
 <para>DESCRIPTION
 </para>
@@ -946,24 +890,9 @@ specified.
 <para>Pointer to the location where the stc is to be stored.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>stc points to an invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml
index 9fad86ce7f5..2ab6ddcfc4e 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/media/dvb/dvbapi.xml
@@ -114,8 +114,28 @@ Added ISDB-T test originally written by Patrick Boettcher
     &sub-examples;
   </chapter>
 <!-- END OF CHAPTERS -->
+  <appendix id="audio_h">
+    <title>DVB Audio Header File</title>
+    &sub-audio-h;
+  </appendix>
+  <appendix id="ca_h">
+    <title>DVB Conditional Access Header File</title>
+    &sub-ca-h;
+  </appendix>
+  <appendix id="dmx_h">
+    <title>DVB Demux Header File</title>
+    &sub-dmx-h;
+  </appendix>
   <appendix id="frontend_h">
     <title>DVB Frontend Header File</title>
     &sub-frontend-h;
   </appendix>
+  <appendix id="net_h">
+    <title>DVB Network Header File</title>
+    &sub-net-h;
+  </appendix>
+  <appendix id="video_h">
+    <title>DVB Video Header File</title>
+    &sub-video-h;
+  </appendix>
 
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
new file mode 100644
index 00000000000..207e1a5bf8f
--- /dev/null
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -0,0 +1,859 @@
+<section id="FE_GET_SET_PROPERTY">
+<title><constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></title>
+<para>This section describes the DVB version 5 extention of the DVB-API, also
+called "S2API", as this API were added to provide support for DVB-S2. It was
+designed to be able to replace the old frontend API. Yet, the DISEQC and
+the capability ioctls weren't implemented yet via the new way.</para>
+<para>The typical usage for the <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant>
+API is to replace the ioctl's were the <link linkend="dvb-frontend-parameters">
+struct <constant>dvb_frontend_parameters</constant></link> were used.</para>
+<section id="dtv-property">
+<title>DTV property type</title>
+<programlisting>
+/* Reserved fields should be set to 0 */
+struct dtv_property {
+	__u32 cmd;
+	union {
+		__u32 data;
+		struct {
+			__u8 data[32];
+			__u32 len;
+			__u32 reserved1[3];
+			void *reserved2;
+		} buffer;
+	} u;
+	int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+</programlisting>
+</section>
+<section id="dtv-properties">
+<title>DTV properties type</title>
+<programlisting>
+struct dtv_properties {
+	__u32 num;
+	struct dtv_property *props;
+};
+</programlisting>
+</section>
+
+<section id="FE_GET_PROPERTY">
+<title>FE_GET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call returns one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section id="FE_SET_PROPERTY">
+<title>FE_SET_PROPERTY</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call sets one or more frontend properties. This call only
+ requires read-only access to the device.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+ dtv_properties &#x22C6;props);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int num</para>
+</entry><entry
+ align="char">
+<para>Equals <link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link> for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dtv_property *props</para>
+</entry><entry
+ align="char">
+<para>Points to the location where the front-end property commands are stored.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+<informaltable><tgroup cols="2"><tbody><row>
+  <entry align="char"><para>EOPNOTSUPP</para></entry>
+  <entry align="char"><para>Property type not supported.</para></entry>
+ </row></tbody></tgroup></informaltable>
+</section>
+
+<section>
+	<title>Property types</title>
+<para>
+On <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>/<link linkend="FE_SET_PROPERTY">FE_SET_PROPERTY</link>,
+the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to
+get/set up to 64 properties. The actual meaning of each property is described on the next sections.
+</para>
+
+<para>The available frontend property types are shown on the next section.</para>
+</section>
+
+<section id="fe_property_parameters">
+	<title>Digital TV property parameters</title>
+	<section id="DTV-UNDEFINED">
+	<title><constant>DTV_UNDEFINED</constant></title>
+	<para>Used internally. A GET/SET operation for it won't change or return anything.</para>
+	</section>
+	<section id="DTV-TUNE">
+	<title><constant>DTV_TUNE</constant></title>
+	<para>Interpret the cache of data, build either a traditional frontend tunerequest so we can pass validation in the <constant>FE_SET_FRONTEND</constant> ioctl.</para>
+	</section>
+	<section id="DTV-CLEAR">
+	<title><constant>DTV_CLEAR</constant></title>
+	<para>Reset a cache of data specific to the frontend here. This does not effect hardware.</para>
+	</section>
+	<section id="DTV-FREQUENCY">
+		<title><constant>DTV_FREQUENCY</constant></title>
+
+		<para>Central frequency of the channel, in HZ.</para>
+
+		<para>Notes:</para>
+		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
+			the channel which is 6MHz.</para>
+
+		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
+			central frequency of the channel is expected.</para>
+	</section>
+	<section id="DTV-MODULATION">
+	<title><constant>DTV_MODULATION</constant></title>
+<para>Specifies the frontend modulation type for cable and satellite types. The modulation can be one of the types bellow:</para>
+<programlisting>
+ typedef enum fe_modulation {
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
+ } fe_modulation_t;
+</programlisting>
+	</section>
+	<section id="DTV-BANDWIDTH-HZ">
+		<title><constant>DTV_BANDWIDTH_HZ</constant></title>
+
+		<para>Bandwidth for the channel, in HZ.</para>
+
+		<para>Possible values:
+			<constant>1712000</constant>,
+			<constant>5000000</constant>,
+			<constant>6000000</constant>,
+			<constant>7000000</constant>,
+			<constant>8000000</constant>,
+			<constant>10000000</constant>.
+		</para>
+
+		<para>Notes:</para>
+
+		<para>1) For ISDB-T it should be always 6000000Hz (6MHz)</para>
+		<para>2) For ISDB-Tsb it can vary depending on the number of connected segments</para>
+		<para>3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth
+			 for DVB-C depends on the symbol rate</para>
+		<para>4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from
+			other parameters (DTV_ISDBT_SB_SEGMENT_IDX,
+			DTV_ISDBT_SB_SEGMENT_COUNT).</para>
+		<para>5) DVB-T supports 6, 7 and 8MHz.</para>
+		<para>6) In addition, DVB-T2 supports 1.172, 5 and 10MHz.</para>
+	</section>
+	<section id="DTV-INVERSION">
+	<title><constant>DTV_INVERSION</constant></title>
+	<para>The Inversion field can take one of these values:
+	</para>
+	<programlisting>
+	typedef enum fe_spectral_inversion {
+		INVERSION_OFF,
+		INVERSION_ON,
+		INVERSION_AUTO
+	} fe_spectral_inversion_t;
+	</programlisting>
+	<para>It indicates if spectral inversion should be presumed or not. In the automatic setting
+	(<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
+	itself.
+	</para>
+	</section>
+	<section id="DTV-DISEQC-MASTER">
+	<title><constant>DTV_DISEQC_MASTER</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-SYMBOL-RATE">
+	<title><constant>DTV_SYMBOL_RATE</constant></title>
+	<para>Digital TV symbol rate, in bauds (symbols/second). Used on cable standards.</para>
+	</section>
+	<section id="DTV-INNER-FEC">
+	<title><constant>DTV_INNER_FEC</constant></title>
+	<para>Used cable/satellite transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	<para>which correspond to error correction rates of 1/2, 2/3, etc.,
+	no error correction or auto detection.</para>
+	</section>
+	<section id="DTV-VOLTAGE">
+	<title><constant>DTV_VOLTAGE</constant></title>
+	<para>The voltage is usually used with non-DiSEqC capable LNBs to switch
+	the polarzation (horizontal/vertical). When using DiSEqC epuipment this
+	voltage has to be switched consistently to the DiSEqC commands as
+	described in the DiSEqC spec.</para>
+	<programlisting>
+		typedef enum fe_sec_voltage {
+		SEC_VOLTAGE_13,
+		SEC_VOLTAGE_18
+		} fe_sec_voltage_t;
+	</programlisting>
+	</section>
+	<section id="DTV-TONE">
+	<title><constant>DTV_TONE</constant></title>
+	<para>Currently not used.</para>
+	</section>
+	<section id="DTV-PILOT">
+	<title><constant>DTV_PILOT</constant></title>
+	<para>Sets DVB-S2 pilot</para>
+	<section id="fe-pilot-t">
+		<title>fe_pilot type</title>
+		<programlisting>
+typedef enum fe_pilot {
+	PILOT_ON,
+	PILOT_OFF,
+	PILOT_AUTO,
+} fe_pilot_t;
+		</programlisting>
+		</section>
+	</section>
+	<section id="DTV-ROLLOFF">
+	<title><constant>DTV_ROLLOFF</constant></title>
+		<para>Sets DVB-S2 rolloff</para>
+
+	<section id="fe-rolloff-t">
+		<title>fe_rolloff type</title>
+		<programlisting>
+typedef enum fe_rolloff {
+	ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+	ROLLOFF_20,
+	ROLLOFF_25,
+	ROLLOFF_AUTO,
+} fe_rolloff_t;
+		</programlisting>
+		</section>
+	</section>
+	<section id="DTV-DISEQC-SLAVE-REPLY">
+	<title><constant>DTV_DISEQC_SLAVE_REPLY</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-FE-CAPABILITY-COUNT">
+	<title><constant>DTV_FE_CAPABILITY_COUNT</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-FE-CAPABILITY">
+	<title><constant>DTV_FE_CAPABILITY</constant></title>
+	<para>Currently not implemented.</para>
+	</section>
+	<section id="DTV-DELIVERY-SYSTEM">
+		<title><constant>DTV_DELIVERY_SYSTEM</constant></title>
+		<para>Specifies the type of Delivery system</para>
+		<section id="fe-delivery-system-t">
+		<title>fe_delivery_system type</title>
+		<para>Possible values: </para>
+<programlisting>
+typedef enum fe_delivery_system {
+	SYS_UNDEFINED,
+	SYS_DVBC_ANNEX_AC,
+	SYS_DVBC_ANNEX_B,
+	SYS_DVBT,
+	SYS_DSS,
+	SYS_DVBS,
+	SYS_DVBS2,
+	SYS_DVBH,
+	SYS_ISDBT,
+	SYS_ISDBS,
+	SYS_ISDBC,
+	SYS_ATSC,
+	SYS_ATSCMH,
+	SYS_DMBTH,
+	SYS_CMMB,
+	SYS_DAB,
+	SYS_DVBT2,
+} fe_delivery_system_t;
+</programlisting>
+		</section>
+	</section>
+	<section id="DTV-ISDBT-PARTIAL-RECEPTION">
+		<title><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></title>
+
+		<para>If <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '0' this bit-field represents whether
+			the channel is in partial reception mode or not.</para>
+
+		<para>If '1' <constant>DTV_ISDBT_LAYERA_*</constant> values are assigned to the center segment and
+			<constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant> has to be '1'.</para>
+
+		<para>If in addition <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'
+			<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> represents whether this ISDB-Tsb channel
+			is consisting of one segment and layer or three segments and two layers.</para>
+
+		<para>Possible values: 0, 1, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SOUND-BROADCASTING">
+		<title><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></title>
+
+		<para>This field represents whether the other DTV_ISDBT_*-parameters are
+			referring to an ISDB-T and an ISDB-Tsb channel. (See also
+			<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>).</para>
+
+		<para>Possible values: 0, 1, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SUBCHANNEL-ID">
+		<title><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></title>
+
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+
+		<para>(Note of the author: This might not be the correct description of the
+			<constant>SUBCHANNEL-ID</constant> in all details, but it is my understanding of the technical
+			background needed to program a device)</para>
+
+		<para>An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a
+			set of connected ISDB-Tsb channels. In this set of channels every
+			channel can be received independently. The number of connected
+			ISDB-Tsb segment can vary, e.g. depending on the frequency spectrum
+			bandwidth available.</para>
+
+		<para>Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The
+			broadcaster has several possibilities to put those channels in the
+			air: Assuming a normal 13-segment ISDB-T spectrum he can align the 8
+			segments from position 1-8 to 5-13 or anything in between.</para>
+
+		<para>The underlying layer of segments are subchannels: each segment is
+			consisting of several subchannels with a predefined IDs. A sub-channel
+			is used to help the demodulator to synchronize on the channel.</para>
+
+		<para>An ISDB-T channel is always centered over all sub-channels. As for
+			the example above, in ISDB-Tsb it is no longer as simple as that.</para>
+
+		<para><constant>The DTV_ISDBT_SB_SUBCHANNEL_ID</constant> parameter is used to give the
+			sub-channel ID of the segment to be demodulated.</para>
+
+		<para>Possible values: 0 .. 41, -1 (AUTO)</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SEGMENT-IDX">
+		<title><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></title>
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+		<para><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant> gives the index of the segment to be
+			demodulated for an ISDB-Tsb channel where several of them are
+			transmitted in the connected manner.</para>
+		<para>Possible values: 0 .. <constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> - 1</para>
+		<para>Note: This value cannot be determined by an automatic channel search.</para>
+	</section>
+	<section id="DTV-ISDBT-SB-SEGMENT-COUNT">
+		<title><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></title>
+		<para>This field only applies if <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> is '1'.</para>
+		<para><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant> gives the total count of connected ISDB-Tsb
+			channels.</para>
+		<para>Possible values: 1 .. 13</para>
+		<para>Note: This value cannot be determined by an automatic channel search.</para>
+	</section>
+	<section id="isdb-hierq-layers">
+		<title><constant>DTV-ISDBT-LAYER*</constant> parameters</title>
+		<para>ISDB-T channels can be coded hierarchically. As opposed to DVB-T in
+			ISDB-T hierarchical layers can be decoded simultaneously. For that
+			reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders.</para>
+		<para>ISDB-T has 3 hierarchical layers which each can use a part of the
+			available segments. The total number of segments over all layers has
+			to 13 in ISDB-T.</para>
+		<para>There are 3 parameter sets, for Layers A, B and C.</para>
+		<section id="DTV-ISDBT-LAYER-ENABLED">
+			<title><constant>DTV_ISDBT_LAYER_ENABLED</constant></title>
+			<para>Hierarchical reception in ISDB-T is achieved by enabling or disabling
+				layers in the decoding process. Setting all bits of
+				<constant>DTV_ISDBT_LAYER_ENABLED</constant> to '1' forces all layers (if applicable) to be
+				demodulated. This is the default.</para>
+			<para>If the channel is in the partial reception mode
+				(<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> = 1) the central segment can be decoded
+				independently of the other 12 segments. In that mode layer A has to
+				have a <constant>SEGMENT_COUNT</constant> of 1.</para>
+			<para>In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb
+				according to <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>. <constant>SEGMENT_COUNT</constant> must be filled
+				accordingly.</para>
+			<para>Possible values: 0x1, 0x2, 0x4 (|-able)</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[0:0]</constant> - layer A</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[1:1]</constant> - layer B</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[2:2]</constant> - layer C</para>
+			<para><constant>DTV_ISDBT_LAYER_ENABLED[31:3]</constant> unused</para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-FEC">
+			<title><constant>DTV_ISDBT_LAYER*_FEC</constant></title>
+			<para>Possible values: <constant>FEC_AUTO</constant>, <constant>FEC_1_2</constant>, <constant>FEC_2_3</constant>, <constant>FEC_3_4</constant>, <constant>FEC_5_6</constant>, <constant>FEC_7_8</constant></para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-MODULATION">
+			<title><constant>DTV_ISDBT_LAYER*_MODULATION</constant></title>
+			<para>Possible values: <constant>QAM_AUTO</constant>, QP<constant>SK, QAM_16</constant>, <constant>QAM_64</constant>, <constant>DQPSK</constant></para>
+			<para>Note: If layer C is <constant>DQPSK</constant> layer B has to be <constant>DQPSK</constant>. If layer B is <constant>DQPSK</constant>
+				and <constant>DTV_ISDBT_PARTIAL_RECEPTION</constant>=0 layer has to be <constant>DQPSK</constant>.</para>
+		</section>
+		<section id="DTV-ISDBT-LAYER-SEGMENT-COUNT">
+			<title><constant>DTV_ISDBT_LAYER*_SEGMENT_COUNT</constant></title>
+			<para>Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO)</para>
+			<para>Note: Truth table for <constant>DTV_ISDBT_SOUND_BROADCASTING</constant> and
+				<constant>DTV_ISDBT_PARTIAL_RECEPTION</constant> and <constant>LAYER</constant>*_SEGMENT_COUNT</para>
+			<informaltable id="isdbt-layer_seg-cnt-table">
+				<tgroup cols="6">
+					<tbody>
+						<row>
+							<entry>PR</entry>
+							<entry>SB</entry>
+							<entry>Layer A width</entry>
+							<entry>Layer B width</entry>
+							<entry>Layer C width</entry>
+							<entry>total width</entry>
+						</row>
+						<row>
+							<entry>0</entry>
+							<entry>0</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>13</entry>
+						</row>
+						<row>
+							<entry>1</entry>
+							<entry>0</entry>
+							<entry>1</entry>
+							<entry>1 .. 13</entry>
+							<entry>1 .. 13</entry>
+							<entry>13</entry>
+						</row>
+						<row>
+							<entry>0</entry>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>0</entry>
+							<entry>0</entry>
+							<entry>1</entry>
+						</row>
+						<row>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>1</entry>
+							<entry>2</entry>
+							<entry>0</entry>
+							<entry>13</entry>
+						</row>
+					</tbody>
+				</tgroup>
+			</informaltable>
+		</section>
+		<section id="DTV-ISDBT-LAYER-TIME-INTERLEAVING">
+			<title><constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant></title>
+			<para>Possible values: 0, 1, 2, 3, -1 (AUTO)</para>
+			<para>Note: The real inter-leaver depth-names depend on the mode (fft-size); the values
+				here are referring to what can be found in the TMCC-structure -
+				independent of the mode.</para>
+		</section>
+	</section>
+	<section id="DTV-API-VERSION">
+	<title><constant>DTV_API_VERSION</constant></title>
+	<para>Returns the major/minor version of the DVB API</para>
+	</section>
+	<section id="DTV-CODE-RATE-HP">
+	<title><constant>DTV_CODE_RATE_HP</constant></title>
+	<para>Used on terrestrial transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	</section>
+	<section id="DTV-CODE-RATE-LP">
+	<title><constant>DTV_CODE_RATE_LP</constant></title>
+	<para>Used on terrestrial transmissions. The acceptable values are:
+	</para>
+	<programlisting>
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
+	</programlisting>
+	</section>
+	<section id="DTV-GUARD-INTERVAL">
+		<title><constant>DTV_GUARD_INTERVAL</constant></title>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
+</programlisting>
+
+		<para>Notes:</para>
+		<para>1) If <constant>DTV_GUARD_INTERVAL</constant> is set the <constant>GUARD_INTERVAL_AUTO</constant> the hardware will
+			try to find the correct guard interval (if capable) and will use TMCC to fill
+			in the missing parameters.</para>
+		<para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para>
+	</section>
+	<section id="DTV-TRANSMISSION-MODE">
+		<title><constant>DTV_TRANSMISSION_MODE</constant></title>
+
+		<para>Specifies the number of carriers used by the standard</para>
+
+		<para>Possible values are:</para>
+<programlisting>
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
+} fe_transmit_mode_t;
+</programlisting>
+		<para>Notes:</para>
+		<para>1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called
+			'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K</para>
+
+		<para>2) If <constant>DTV_TRANSMISSION_MODE</constant> is set the <constant>TRANSMISSION_MODE_AUTO</constant> the
+			hardware will try to find the correct FFT-size (if capable) and will
+			use TMCC to fill in the missing parameters.</para>
+		<para>3) DVB-T specifies 2K and 8K as valid sizes.</para>
+		<para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para>
+	</section>
+	<section id="DTV-HIERARCHY">
+	<title><constant>DTV_HIERARCHY</constant></title>
+	<para>Frontend hierarchy</para>
+	<programlisting>
+typedef enum fe_hierarchy {
+	 HIERARCHY_NONE,
+	 HIERARCHY_1,
+	 HIERARCHY_2,
+	 HIERARCHY_4,
+	 HIERARCHY_AUTO
+ } fe_hierarchy_t;
+	</programlisting>
+	</section>
+	<section id="DTV-ISDBS-TS-ID">
+	<title><constant>DTV_ISDBS_TS_ID</constant></title>
+	<para>Currently unused.</para>
+	</section>
+	<section id="DTV-DVBT2-PLP-ID">
+		<title><constant>DTV_DVBT2_PLP_ID</constant></title>
+		<para>DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of
+			many data types via a single multiplex. The API will soon support this
+			at which point this section will be expanded.</para>
+	</section>
+</section>
+	<section id="frontend-property-terrestrial-systems">
+	<title>Properties used on terrestrial delivery systems</title>
+		<section id="dvbt-params">
+			<title>DVB-T delivery system</title>
+			<para>The following parameters are valid for DVB-T:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			</itemizedlist>
+		</section>
+		<section id="dvbt2-params">
+			<title>DVB-T2 delivery system</title>
+			<para>DVB-T2 support is currently in the early stages
+			of development, so expect that this section maygrow and become
+			more detailed with time.</para>
+		<para>The following parameters are valid for DVB-T2:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DVBT2-PLP-ID"><constant>DTV_DVBT2_PLP_ID</constant></link></para></listitem>
+		</itemizedlist>
+		</section>
+		<section id="isdbt">
+		<title>ISDB-T delivery system</title>
+		<para>This ISDB-T/ISDB-Tsb API extension should reflect all information
+			needed to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible
+			that some very sophisticated devices won't need certain parameters to
+			tune.</para>
+		<para>The information given here should help application writers to know how
+			to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API.</para>
+		<para>The details given here about ISDB-T and ISDB-Tsb are just enough to
+			basically show the dependencies between the needed parameter values,
+			but surely some information is left out. For more detailed information
+			see the following documents:</para>
+		<para>ARIB STD-B31 - "Transmission System for Digital Terrestrial
+			Television Broadcasting" and</para>
+		<para>ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial
+			Television Broadcasting".</para>
+		<para>In order to understand the ISDB specific parameters,
+			one has to have some knowledge the channel structure in
+			ISDB-T and ISDB-Tsb. I.e. it has to be known to
+			the reader that an ISDB-T channel consists of 13 segments,
+			that it can have up to 3 layer sharing those segments,
+			and things like that.</para>
+		<para>The following parameters are valid for ISDB-T:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SUBCHANNEL-ID"><constant>DTV_ISDBT_SB_SUBCHANNEL_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-IDX"><constant>DTV_ISDBT_SB_SEGMENT_IDX</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-SB-SEGMENT-COUNT"><constant>DTV_ISDBT_SB_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERA_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERA_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERA_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERA_TIME_INTERLEAVING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERB_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERB_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERB_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERB_TIME_INTERLEAVING</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-FEC"><constant>DTV_ISDBT_LAYERC_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-MODULATION"><constant>DTV_ISDBT_LAYERC_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-SEGMENT-COUNT"><constant>DTV_ISDBT_LAYERC_SEGMENT_COUNT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBT-LAYER-TIME-INTERLEAVING"><constant>DTV_ISDBT_LAYERC_TIME_INTERLEAVING</constant></link></para></listitem>
+		</itemizedlist>
+		</section>
+		<section id="atsc-params">
+			<title>ATSC delivery system</title>
+			<para>The following parameters are valid for ATSC:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+			</itemizedlist>
+		</section>
+	</section>
+	<section id="frontend-property-cable-systems">
+	<title>Properties used on cable delivery systems</title>
+	<section id="dvbc-params">
+		<title>DVB-C delivery system</title>
+		<para>The DVB-C Annex-A/C is the widely used cable standard. Transmission uses QAM modulation.</para>
+		<para>The following parameters are valid for DVB-C Annex A/C:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="dvbc-annex-b-params">
+		<title>DVB-C Annex B delivery system</title>
+		<para>The DVB-C Annex-B is only used on a few Countries like the United States.</para>
+		<para>The following parameters are valid for DVB-C Annex B:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	</section>
+	<section id="frontend-property-satellital-systems">
+	<title>Properties used on satellital delivery systems</title>
+	<section id="dvbs-params">
+		<title>DVB-S delivery system</title>
+		<para>The following parameters are valid for DVB-S:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+		</itemizedlist>
+		<para>Future implementations might add those two missing parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="dvbs2-params">
+		<title>DVB-S2 delivery system</title>
+		<para>The following parameters are valid for DVB-S2:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TONE"><constant>DTV_TONE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-PILOT"><constant>DTV_PILOT</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
+		</itemizedlist>
+		<para>Future implementations might add those two missing parameters:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-DISEQC-MASTER"><constant>DTV_DISEQC_MASTER</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DISEQC-SLAVE-REPLY"><constant>DTV_DISEQC_SLAVE_REPLY</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	<section id="isdbs-params">
+		<title>ISDB-S delivery system</title>
+		<para>The following parameters are valid for ISDB-S:</para>
+		<itemizedlist mark='opencircle'>
+			<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-ISDBS-TS-ID"><constant>DTV_ISDBS_TS_ID</constant></link></para></listitem>
+		</itemizedlist>
+	</section>
+	</section>
+</section>
diff --git a/Documentation/DocBook/dvb/dvbstb.pdf b/Documentation/DocBook/media/dvb/dvbstb.pdf
index 0fa75d90c3e..0fa75d90c3e 100644
--- a/Documentation/DocBook/dvb/dvbstb.pdf
+++ b/Documentation/DocBook/media/dvb/dvbstb.pdf
diff --git a/Documentation/DocBook/dvb/examples.xml b/Documentation/DocBook/media/dvb/examples.xml
index f037e568eb6..f037e568eb6 100644
--- a/Documentation/DocBook/dvb/examples.xml
+++ b/Documentation/DocBook/media/dvb/examples.xml
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml
index 60c6976fb31..61407eaba02 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/media/dvb/frontend.xml
@@ -20,22 +20,52 @@ cards, in which case there exists no frontend device.</para>
 <section id="frontend_types">
 <title>Frontend Data Types</title>
 
-<section id="frontend_type">
-<title>frontend type</title>
-
-<para>For historical reasons frontend types are named after the type of modulation used in
-transmission.</para>
-<programlisting>
-	typedef enum fe_type {
-	FE_QPSK,   /&#x22C6; DVB-S &#x22C6;/
-	FE_QAM,    /&#x22C6; DVB-C &#x22C6;/
-	FE_OFDM    /&#x22C6; DVB-T &#x22C6;/
-	} fe_type_t;
-</programlisting>
-
+<section id="fe-type-t">
+<title>Frontend type</title>
+
+<para>For historical reasons, frontend types are named by the type of modulation used in
+transmission. The fontend types are given by fe_type_t type, defined as:</para>
+
+<table pgwide="1" frame="none" id="fe-type">
+<title>Frontend types</title>
+<tgroup cols="3">
+   &cs-def;
+   <thead>
+     <row>
+       <entry>fe_type</entry>
+       <entry>Description</entry>
+       <entry><link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> equivalent type</entry>
+     </row>
+  </thead>
+  <tbody valign="top">
+  <row>
+     <entry id="FE_QPSK"><constant>FE_QPSK</constant></entry>
+     <entry>For DVB-S standard</entry>
+     <entry><constant>SYS_DVBS</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_QAM"><constant>FE_QAM</constant></entry>
+     <entry>For DVB-C annex A/C standard</entry>
+     <entry><constant>SYS_DVBC_ANNEX_AC</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_OFDM"><constant>FE_OFDM</constant></entry>
+     <entry>For DVB-T standard</entry>
+     <entry><constant>SYS_DVBT</constant></entry>
+  </row>
+  <row>
+     <entry id="FE_ATSC"><constant>FE_ATSC</constant></entry>
+     <entry>For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used in US.</entry>
+     <entry><constant>SYS_ATSC</constant> (terrestrial) or <constant>SYS_DVBC_ANNEX_B</constant> (cable)</entry>
+  </row>
+</tbody></tgroup></table>
+
+<para>Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described at the above, as they're
+supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET_SET_PROPERTY</link> ioctl's, using the <link linkend="DTV-DELIVERY-SYSTEM">DTV_DELIVERY_SYSTEM</link> parameter.
+</para>
 </section>
 
-<section id="frontend_caps">
+<section id="fe-caps-t">
 <title>frontend capabilities</title>
 
 <para>Capabilities describe what a frontend can do. Some capabilities can only be supported for
@@ -76,7 +106,7 @@ a specific frontend type.</para>
 </programlisting>
 </section>
 
-<section id="frontend_info">
+<section id="dvb-frontend-info">
 <title>frontend information</title>
 
 <para>Information about the frontend ca be queried with
@@ -99,7 +129,7 @@ a specific frontend type.</para>
 </programlisting>
 </section>
 
-<section id="frontend_diseqc">
+<section id="dvb-diseqc-master-cmd">
 <title>diseqc master command</title>
 
 <para>A message sent from the frontend to DiSEqC capable equipment.</para>
@@ -110,7 +140,7 @@ a specific frontend type.</para>
 	};
 </programlisting>
 </section>
-<section role="subsection">
+<section role="subsection" id="dvb-diseqc-slave-reply">
 <title>diseqc slave reply</title>
 
 <para>A reply to the frontend from DiSEqC 2.0 capable equipment.</para>
@@ -123,7 +153,7 @@ a specific frontend type.</para>
 </programlisting>
 </section>
 
-<section id="frontend_diseqc_slave_reply">
+<section id="fe-sec-voltage-t">
 <title>diseqc slave reply</title>
 <para>The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation
 (horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched
@@ -136,7 +166,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
 </programlisting>
 </section>
 
-<section id="frontend_sec_tone">
+<section id="fe-sec-tone-mode-t">
 <title>SEC continuous tone</title>
 
 <para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
@@ -151,7 +181,7 @@ spec.</para>
 </programlisting>
 </section>
 
-<section id="frontend_sec_burst">
+<section id="fe-sec-mini-cmd-t">
 <title>SEC tone burst</title>
 
 <para>The 22KHz tone burst is usually used with non-DiSEqC capable switches to select
@@ -168,7 +198,7 @@ spec.</para>
 <para></para>
 </section>
 
-<section id="frontend_status">
+<section id="fe-status-t">
 <title>frontend status</title>
 <para>Several functions of the frontend device use the fe_status data type defined
 by</para>
@@ -188,31 +218,54 @@ by</para>
 
 </section>
 
-<section id="frontend_params">
+<section id="dvb-frontend-parameters">
 <title>frontend parameters</title>
 <para>The kind of parameters passed to the frontend device for tuning depend on
-the kind of hardware you are using. All kinds of parameters are combined as an
-union in the FrontendParameters structure:</para>
+the kind of hardware you are using.</para>
+<para>The struct <constant>dvb_frontend_parameters</constant> uses an
+union with specific per-system parameters. However, as newer delivery systems
+required more data, the structure size weren't enough to fit, and just
+extending its size would break the existing applications. So, those parameters
+were replaced by the usage of <link linkend="FE_GET_SET_PROPERTY">
+<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> ioctl's. The
+new API is flexible enough to add new parameters to existing delivery systems,
+and to add newer delivery systems.</para>
+<para>So, newer applications should use <link linkend="FE_GET_SET_PROPERTY">
+<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> instead, in
+order to be able to support the newer System Delivery like  DVB-S2, DVB-T2,
+DVB-C2, ISDB, etc.</para>
+<para>All kinds of parameters are combined as an union in the FrontendParameters structure:</para>
 <programlisting>
- struct dvb_frontend_parameters {
-	 uint32_t frequency;       /&#x22C6; (absolute) frequency in Hz for QAM/OFDM &#x22C6;/
-				   /&#x22C6; intermediate frequency in kHz for QPSK &#x22C6;/
-	 fe_spectral_inversion_t inversion;
-	 union {
-		 struct dvb_qpsk_parameters qpsk;
-		 struct dvb_qam_parameters  qam;
-		 struct dvb_ofdm_parameters ofdm;
-	 } u;
- };
+struct dvb_frontend_parameters {
+	uint32_t frequency;     /&#x22C6; (absolute) frequency in Hz for QAM/OFDM &#x22C6;/
+				/&#x22C6; intermediate frequency in kHz for QPSK &#x22C6;/
+	fe_spectral_inversion_t inversion;
+	union {
+		struct dvb_qpsk_parameters qpsk;
+		struct dvb_qam_parameters  qam;
+		struct dvb_ofdm_parameters ofdm;
+		struct dvb_vsb_parameters  vsb;
+	} u;
+};
 </programlisting>
-<para>For satellite QPSK frontends you have to use the <constant>QPSKParameters</constant> member defined by</para>
+<para>In the case of QPSK frontends the <constant>frequency</constant> field specifies the intermediate
+frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of
+the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and
+OFDM frontends the <constant>frequency</constant> specifies the absolute frequency and is given in Hz.
+</para>
+<section id="dvb-qpsk-parameters">
+<title>QPSK parameters</title>
+<para>For satellite QPSK frontends you have to use the <constant>dvb_qpsk_parameters</constant> structure:</para>
 <programlisting>
  struct dvb_qpsk_parameters {
 	 uint32_t        symbol_rate;  /&#x22C6; symbol rate in Symbols per second &#x22C6;/
 	 fe_code_rate_t  fec_inner;    /&#x22C6; forward error correction (see above) &#x22C6;/
  };
 </programlisting>
-<para>for cable QAM frontend you use the <constant>QAMParameters</constant> structure</para>
+</section>
+<section id="dvb-qam-parameters">
+<title>QAM parameters</title>
+<para>for cable QAM frontend you use the <constant>dvb_qam_parameters</constant> structure:</para>
 <programlisting>
  struct dvb_qam_parameters {
 	 uint32_t         symbol_rate; /&#x22C6; symbol rate in Symbols per second &#x22C6;/
@@ -220,8 +273,19 @@ union in the FrontendParameters structure:</para>
 	 fe_modulation_t  modulation;  /&#x22C6; modulation type (see above) &#x22C6;/
  };
 </programlisting>
-<para>DVB-T frontends are supported by the <constant>OFDMParamters</constant> structure
-</para>
+</section>
+<section id="dvb-vsb-parameters">
+<title>VSB parameters</title>
+<para>ATSC frontends are supported by the <constant>dvb_vsb_parameters</constant> structure:</para>
+<programlisting>
+struct dvb_vsb_parameters {
+	fe_modulation_t modulation;	/&#x22C6; modulation type (see above) &#x22C6;/
+};
+</programlisting>
+</section>
+<section id="dvb-ofdm-parameters">
+<title>OFDM parameters</title>
+<para>DVB-T frontends are supported by the <constant>dvb_ofdm_parameters</constant> structure:</para>
 <programlisting>
  struct dvb_ofdm_parameters {
 	 fe_bandwidth_t      bandwidth;
@@ -233,86 +297,124 @@ union in the FrontendParameters structure:</para>
 	 fe_hierarchy_t      hierarchy_information;
  };
 </programlisting>
-<para>In the case of QPSK frontends the <constant>Frequency</constant> field specifies the intermediate
-frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of
-the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and
-OFDM frontends the Frequency specifies the absolute frequency and is given in
-Hz.
-</para>
+</section>
+<section id="fe-spectral-inversion-t">
+<title>frontend spectral inversion</title>
 <para>The Inversion field can take one of these values:
 </para>
 <programlisting>
- typedef enum fe_spectral_inversion {
-	 INVERSION_OFF,
-	 INVERSION_ON,
-	 INVERSION_AUTO
- } fe_spectral_inversion_t;
+typedef enum fe_spectral_inversion {
+	INVERSION_OFF,
+	INVERSION_ON,
+	INVERSION_AUTO
+} fe_spectral_inversion_t;
 </programlisting>
 <para>It indicates if spectral inversion should be presumed or not. In the automatic setting
 (<constant>INVERSION_AUTO</constant>) the hardware will try to figure out the correct setting by
 itself.
 </para>
-<para>The possible values for the <constant>FEC_inner</constant> field are
+</section>
+<section id="fe-code-rate-t">
+<title>frontend code rate</title>
+<para>The possible values for the <constant>fec_inner</constant> field used on
+<link refend="dvb-qpsk-parameters"><constant>struct dvb_qpsk_parameters</constant></link> and
+<link refend="dvb-qam-parameters"><constant>struct dvb_qam_parameters</constant></link> are:
 </para>
 <programlisting>
- typedef enum fe_code_rate {
-	 FEC_NONE = 0,
-	 FEC_1_2,
-	 FEC_2_3,
-	 FEC_3_4,
-	 FEC_4_5,
-	 FEC_5_6,
-	 FEC_6_7,
-	 FEC_7_8,
-	 FEC_8_9,
-	 FEC_AUTO
- } fe_code_rate_t;
+typedef enum fe_code_rate {
+	FEC_NONE = 0,
+	FEC_1_2,
+	FEC_2_3,
+	FEC_3_4,
+	FEC_4_5,
+	FEC_5_6,
+	FEC_6_7,
+	FEC_7_8,
+	FEC_8_9,
+	FEC_AUTO,
+	FEC_3_5,
+	FEC_9_10,
+} fe_code_rate_t;
 </programlisting>
 <para>which correspond to error correction rates of 1/2, 2/3, etc., no error correction or auto
 detection.
 </para>
-<para>For cable and terrestrial frontends (QAM and OFDM) one also has to specify the quadrature
-modulation mode which can be one of the following:
+</section>
+<section id="fe-modulation-t">
+<title>frontend modulation type for QAM, OFDM and VSB</title>
+<para>For cable and terrestrial frontends, e. g. for
+<link refend="dvb-qam-parameters"><constant>struct dvb_qpsk_parameters</constant></link>,
+<link refend="dvb-ofdm-parameters"><constant>struct dvb_qam_parameters</constant></link> and
+<link refend="dvb-vsb-parameters"><constant>struct dvb_qam_parameters</constant></link>,
+it needs to specify the quadrature modulation mode which can be one of the following:
 </para>
 <programlisting>
  typedef enum fe_modulation {
- QPSK,
-	 QAM_16,
-	 QAM_32,
-	 QAM_64,
-	 QAM_128,
-	 QAM_256,
-	 QAM_AUTO
+	QPSK,
+	QAM_16,
+	QAM_32,
+	QAM_64,
+	QAM_128,
+	QAM_256,
+	QAM_AUTO,
+	VSB_8,
+	VSB_16,
+	PSK_8,
+	APSK_16,
+	APSK_32,
+	DQPSK,
  } fe_modulation_t;
 </programlisting>
+</section>
 <para>Finally, there are several more parameters for OFDM:
 </para>
+<section id="fe-transmit-mode-t">
+<title>Number of carriers per channel</title>
 <programlisting>
- typedef enum fe_transmit_mode {
-	 TRANSMISSION_MODE_2K,
-	 TRANSMISSION_MODE_8K,
-	 TRANSMISSION_MODE_AUTO
+typedef enum fe_transmit_mode {
+	TRANSMISSION_MODE_2K,
+	TRANSMISSION_MODE_8K,
+	TRANSMISSION_MODE_AUTO,
+	TRANSMISSION_MODE_4K,
+	TRANSMISSION_MODE_1K,
+	TRANSMISSION_MODE_16K,
+	TRANSMISSION_MODE_32K,
  } fe_transmit_mode_t;
 </programlisting>
- <programlisting>
- typedef enum fe_bandwidth {
-	 BANDWIDTH_8_MHZ,
-	 BANDWIDTH_7_MHZ,
-	 BANDWIDTH_6_MHZ,
-	 BANDWIDTH_AUTO
- } fe_bandwidth_t;
+</section>
+<section id="fe-bandwidth-t">
+<title>frontend bandwidth</title>
+<programlisting>
+typedef enum fe_bandwidth {
+	BANDWIDTH_8_MHZ,
+	BANDWIDTH_7_MHZ,
+	BANDWIDTH_6_MHZ,
+	BANDWIDTH_AUTO,
+	BANDWIDTH_5_MHZ,
+	BANDWIDTH_10_MHZ,
+	BANDWIDTH_1_712_MHZ,
+} fe_bandwidth_t;
 </programlisting>
- <programlisting>
- typedef enum fe_guard_interval {
-	 GUARD_INTERVAL_1_32,
-	 GUARD_INTERVAL_1_16,
-	 GUARD_INTERVAL_1_8,
-	 GUARD_INTERVAL_1_4,
-	 GUARD_INTERVAL_AUTO
- } fe_guard_interval_t;
+</section>
+<section id="fe-guard-interval-t">
+<title>frontend guard inverval</title>
+<programlisting>
+typedef enum fe_guard_interval {
+	GUARD_INTERVAL_1_32,
+	GUARD_INTERVAL_1_16,
+	GUARD_INTERVAL_1_8,
+	GUARD_INTERVAL_1_4,
+	GUARD_INTERVAL_AUTO,
+	GUARD_INTERVAL_1_128,
+	GUARD_INTERVAL_19_128,
+	GUARD_INTERVAL_19_256,
+} fe_guard_interval_t;
 </programlisting>
- <programlisting>
- typedef enum fe_hierarchy {
+</section>
+<section id="fe-hierarchy-t">
+<title>frontend hierarchy</title>
+<programlisting>
+typedef enum fe_hierarchy {
 	 HIERARCHY_NONE,
 	 HIERARCHY_1,
 	 HIERARCHY_2,
@@ -320,10 +422,11 @@ modulation mode which can be one of the following:
 	 HIERARCHY_AUTO
  } fe_hierarchy_t;
 </programlisting>
+</section>
 
 </section>
 
-<section id="frontend_events">
+<section id="dvb-frontend-event">
 <title>frontend events</title>
  <programlisting>
  struct dvb_frontend_event {
@@ -412,8 +515,7 @@ modulation mode which can be one of the following:
 <para>(blocking mode is the default)</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>ENODEV</para>
@@ -473,8 +575,7 @@ modulation mode which can be one of the following:
 <para>File descriptor returned by a previous call to open().</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EBADF</para>
@@ -530,8 +631,7 @@ modulation mode which can be one of the following:
  to be stored.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EBADF</para>
@@ -592,38 +692,8 @@ modulation mode which can be one of the following:
 <para>The bit error rate is stored into *ber.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>ber points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSIGNAL</para>
-</entry><entry
- align="char">
-<para>There is no signal, thus no meaningful bit error rate. Also
- returned if the front-end is not turned on.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSYS</para>
-</entry><entry
- align="char">
-<para>Function not available for this device.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
 </section>
 
 <section id="FE_READ_SNR">
@@ -670,38 +740,7 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>snr points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSIGNAL</para>
-</entry><entry
- align="char">
-<para>There is no signal, thus no meaningful signal strength
- value. Also returned if front-end is not turned on.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSYS</para>
-</entry><entry
- align="char">
-<para>Function not available for this device.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_READ_SIGNAL_STRENGTH">
@@ -748,38 +787,8 @@ modulation mode which can be one of the following:
 <para>The signal strength value is stored into *strength.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>status points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSIGNAL</para>
-</entry><entry
- align="char">
-<para>There is no signal, thus no meaningful signal strength
- value. Also returned if front-end is not turned on.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSYS</para>
-</entry><entry
- align="char">
-<para>Function not available for this device.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
 </section>
 
 <section id="FE_READ_UNCORRECTED_BLOCKS">
@@ -833,30 +842,8 @@ modulation mode which can be one of the following:
  so far.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>ublocks points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>ENOSYS</para>
-</entry><entry
- align="char">
-<para>Function not available for this device.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+
+&return-value-dvb;
 </section>
 
 <section id="FE_SET_FRONTEND">
@@ -909,24 +896,10 @@ modulation mode which can be one of the following:
 <para>Points to parameters for tuning operation.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>p points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -982,25 +955,9 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>p points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1084,24 +1041,9 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>ev points to invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EWOULDBLOCK</para>
 </entry><entry
  align="char">
@@ -1113,11 +1055,6 @@ modulation mode which can be one of the following:
 <para>EOVERFLOW</para>
 </entry><entry
  align="char">
-</entry>
- </row><row><entry
- align="char">
-</entry><entry
- align="char">
 <para>Overflow in event queue - one or more events were lost.</para>
 </entry>
 </row></tbody></tgroup></informaltable>
@@ -1170,23 +1107,7 @@ modulation mode which can be one of the following:
  to be stored.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>info points to invalid address.</para>
-</entry>
-</row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_DISEQC_RESET_OVERLOAD">
@@ -1229,30 +1150,7 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>Permission denied (needs read/write access).</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
-</row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_DISEQC_SEND_MASTER_CMD">
@@ -1302,45 +1200,7 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>Seq points to an invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>The data structure referred to by seq is invalid in some
- way.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>Permission denied (needs read/write access).</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
-</row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_DISEQC_RECV_SLAVE_REPLY">
@@ -1390,45 +1250,7 @@ modulation mode which can be one of the following:
 <para>Pointer to the command to be received.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>Seq points to an invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>The data structure referred to by seq is invalid in some
- way.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>Permission denied (needs read/write access).</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_DISEQC_SEND_BURST">
@@ -1476,45 +1298,7 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>Seq points to an invalid address.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>The data structure referred to by seq is invalid in some
- way.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>Permission denied (needs read/write access).</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
-</row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_SET_TONE">
@@ -1560,44 +1344,7 @@ modulation mode which can be one of the following:
 <para>The requested tone generation mode (on/off).</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>ENODEV</para>
-</entry><entry
- align="char">
-<para>Device driver not loaded/available.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EBUSY</para>
-</entry><entry
- align="char">
-<para>Device or resource busy.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Invalid argument.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>File not opened with read permissions.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
-</row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_SET_VOLTAGE">
@@ -1645,44 +1392,7 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>ENODEV</para>
-</entry><entry
- align="char">
-<para>Device driver not loaded/available.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EBUSY</para>
-</entry><entry
- align="char">
-<para>Device or resource busy.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Invalid argument.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>File not opened with read permissions.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_ENABLE_HIGH_LNB_VOLTAGE">
@@ -1731,44 +1441,7 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>ENODEV</para>
-</entry><entry
- align="char">
-<para>Device driver not loaded/available.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EBUSY</para>
-</entry><entry
- align="char">
-<para>Device or resource busy.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Invalid argument.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EPERM</para>
-</entry><entry
- align="char">
-<para>File not opened with read permissions.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error in the device driver.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_SET_FRONTEND_TUNE_MODE">
@@ -1800,11 +1473,7 @@ FE_TUNE_MODE_ONESHOT When set, this flag will disable any zigzagging or other "n
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS</para>
-<informaltable><tgroup cols="2"><tbody><row>
-<entry align="char"><para>EINVAL</para></entry>
-<entry align="char"><para>Invalid argument.</para></entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 <section id="FE_DISHNETWORK_SEND_LEGACY_CMD">
@@ -1838,12 +1507,7 @@ sends the specified raw cmd to the dish via DISEqC.
 </entry>
  </row></tbody></tgroup></informaltable>
 
-<para>ERRORS</para>
-<informaltable><tgroup cols="1"><tbody><row>
-<entry align="char">
-	<para>There are no errors in use for this call</para>
-</entry>
-</row></tbody></tgroup></informaltable>
+&return-value-dvb;
 </section>
 
 </section>
diff --git a/Documentation/DocBook/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml
index 0dc83f672ea..c75dc7cc3e9 100644
--- a/Documentation/DocBook/dvb/intro.xml
+++ b/Documentation/DocBook/media/dvb/intro.xml
@@ -154,6 +154,10 @@ are called:</para>
 </listitem>
  <listitem>
 
+<para><emphasis role="tt">/dev/dvb/adapterN/dvrM</emphasis>,</para>
+</listitem>
+ <listitem>
+
 <para><emphasis role="tt">/dev/dvb/adapterN/caM</emphasis>,</para></listitem></itemizedlist>
 
 <para>where N enumerates the DVB PCI cards in a system starting
@@ -175,10 +179,27 @@ the devices are described in the following chapters.</para>
 The DVB API include files should be included in application sources with
 a partial path like:</para>
 
-
+<programlisting>
+	#include &#x003C;linux/dvb/audio.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/ca.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/dmx.h&#x003E;
+</programlisting>
 <programlisting>
 	#include &#x003C;linux/dvb/frontend.h&#x003E;
 </programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/net.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/osd.h&#x003E;
+</programlisting>
+<programlisting>
+	#include &#x003C;linux/dvb/video.h&#x003E;
+</programlisting>
 
 <para>To enable applications to support different API version, an
 additional include file <emphasis
diff --git a/Documentation/DocBook/dvb/kdapi.xml b/Documentation/DocBook/media/dvb/kdapi.xml
index 6c67481eaa4..6c67481eaa4 100644
--- a/Documentation/DocBook/dvb/kdapi.xml
+++ b/Documentation/DocBook/media/dvb/kdapi.xml
diff --git a/Documentation/DocBook/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml
index 94e388d94c0..67d37e5ce59 100644
--- a/Documentation/DocBook/dvb/net.xml
+++ b/Documentation/DocBook/media/dvb/net.xml
@@ -7,6 +7,23 @@ application.
 </para>
 <section id="dvb_net_types">
 <title>DVB Net Data Types</title>
+
+<section id="dvb-net-if">
+<title>struct dvb_net_if</title>
+<programlisting>
+struct dvb_net_if {
+	__u16 pid;
+	__u16 if_num;
+	__u8  feedtype;
+#define DVB_NET_FEEDTYPE_MPE 0	/&#x22C6; multi protocol encapsulation &#x22C6;/
+#define DVB_NET_FEEDTYPE_ULE 1	/&#x22C6; ultra lightweight encapsulation &#x22C6;/
+};
+</programlisting>
+</section>
+
+</section>
+<section id="net_fcalls">
+<title>DVB net Function Calls</title>
 <para>To be written&#x2026;
 </para>
 </section>
diff --git a/Documentation/DocBook/dvb/video.xml b/Documentation/DocBook/media/dvb/video.xml
index 7bb287e67c8..25fb823226b 100644
--- a/Documentation/DocBook/dvb/video.xml
+++ b/Documentation/DocBook/media/dvb/video.xml
@@ -18,15 +18,16 @@ supported on some MPEG decoders made for DVD playback.
 <section id="video_types">
 <title>Video Data Types</title>
 
-<section id="video_format_t">
+<section id="video-format-t">
 <title>video_format_t</title>
 <para>The <emphasis role="tt">video_format_t</emphasis> data type defined by
 </para>
 <programlisting>
- typedef enum {
-	 VIDEO_FORMAT_4_3,
-	 VIDEO_FORMAT_16_9
- } video_format_t;
+typedef enum {
+	VIDEO_FORMAT_4_3,     /&#x22C6; Select 4:3 format &#x22C6;/
+	VIDEO_FORMAT_16_9,    /&#x22C6; Select 16:9 format. &#x22C6;/
+	VIDEO_FORMAT_221_1    /&#x22C6; 2.21:1 &#x22C6;/
+} video_format_t;
 </programlisting>
 <para>is used in the VIDEO_SET_FORMAT function (??) to tell the driver which aspect ratio
 the output hardware (e.g. TV) has. It is also used in the data structures video_status
@@ -36,34 +37,36 @@ stream.
 </para>
 </section>
 
-<section id="video_display_format_t">
-<title>video_display_format_t</title>
+<section id="video-displayformat-t">
+<title>video_displayformat_t</title>
 <para>In case the display format of the video stream and of the display hardware differ the
 application has to specify how to handle the cropping of the picture. This can be done using
 the VIDEO_SET_DISPLAY_FORMAT call (??) which accepts
 </para>
 <programlisting>
- typedef enum {
-	 VIDEO_PAN_SCAN,
-	 VIDEO_LETTER_BOX,
-	 VIDEO_CENTER_CUT_OUT
- } video_display_format_t;
+typedef enum {
+	VIDEO_PAN_SCAN,       /&#x22C6; use pan and scan format &#x22C6;/
+	VIDEO_LETTER_BOX,     /&#x22C6; use letterbox format &#x22C6;/
+	VIDEO_CENTER_CUT_OUT  /&#x22C6; use center cut out format &#x22C6;/
+} video_displayformat_t;
 </programlisting>
 <para>as argument.
 </para>
 </section>
 
-<section id="video_stream_source">
+<section id="video-stream-source-t">
 <title>video stream source</title>
 <para>The video stream source is set through the VIDEO_SELECT_SOURCE call and can take
 the following values, depending on whether we are replaying from an internal (demuxer) or
 external (user write) source.
 </para>
 <programlisting>
- typedef enum {
-	 VIDEO_SOURCE_DEMUX,
-	 VIDEO_SOURCE_MEMORY
- } video_stream_source_t;
+typedef enum {
+	VIDEO_SOURCE_DEMUX, /&#x22C6; Select the demux as the main source &#x22C6;/
+	VIDEO_SOURCE_MEMORY /&#x22C6; If this source is selected, the stream
+			       comes from the user through the write
+			       system call &#x22C6;/
+} video_stream_source_t;
 </programlisting>
 <para>VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the frontend or the
 DVR device) as the source of the video stream. If VIDEO_SOURCE_MEMORY
@@ -72,49 +75,98 @@ call.
 </para>
 </section>
 
-<section id="video_play_state">
+<section id="video-play-state-t">
 <title>video play state</title>
 <para>The following values can be returned by the VIDEO_GET_STATUS call representing the
 state of video playback.
 </para>
 <programlisting>
- typedef enum {
-	 VIDEO_STOPPED,
-	 VIDEO_PLAYING,
-	 VIDEO_FREEZED
- } video_play_state_t;
+typedef enum {
+	VIDEO_STOPPED, /&#x22C6; Video is stopped &#x22C6;/
+	VIDEO_PLAYING, /&#x22C6; Video is currently playing &#x22C6;/
+	VIDEO_FREEZED  /&#x22C6; Video is freezed &#x22C6;/
+} video_play_state_t;
 </programlisting>
 </section>
 
-<section id="video_event">
+<section id="video-command">
+<para>The structure must be zeroed before use by the application
+This ensures it can be extended safely in the future.</para>
+<title>struct video-command</title>
+<programlisting>
+struct video_command {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/&#x22C6; 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   &gt;>1: playback at speed/1000 of the normal speed,
+			   &lt;-1: reverse playback at (-speed/1000) of the normal speed. &#x22C6;/
+			__s32 speed;
+			__u32 format;
+		} play;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+</programlisting>
+</section>
+
+<section id="video-size-t">
+<title>struct video_size-t</title>
+<programlisting>
+typedef struct {
+	int w;
+	int h;
+	video_format_t aspect_ratio;
+} video_size_t;
+</programlisting>
+</section>
+
+
+<section id="video-event">
 <title>struct video_event</title>
 <para>The following is the structure of a video event as it is returned by the VIDEO_GET_EVENT
 call.
 </para>
 <programlisting>
- struct video_event {
-	 int32_t type;
-	 time_t timestamp;
-	 union {
-		 video_format_t video_format;
-	 } u;
- };
+struct video_event {
+	__s32 type;
+#define VIDEO_EVENT_SIZE_CHANGED	1
+#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
+#define VIDEO_EVENT_DECODER_STOPPED 	3
+#define VIDEO_EVENT_VSYNC 		4
+	__kernel_time_t timestamp;
+	union {
+		video_size_t size;
+		unsigned int frame_rate;	/&#x22C6; in frames per 1000sec &#x22C6;/
+		unsigned char vsync_field;	/&#x22C6; unknown/odd/even/progressive &#x22C6;/
+	} u;
+};
 </programlisting>
 </section>
 
-<section id="video_status">
+<section id="video-status">
 <title>struct video_status</title>
 <para>The VIDEO_GET_STATUS call returns the following structure informing about various
 states of the playback operation.
 </para>
 <programlisting>
- struct video_status {
-	 boolean video_blank;
-	 video_play_state_t play_state;
-	 video_stream_source_t stream_source;
-	 video_format_t video_format;
-	 video_displayformat_t display_format;
- };
+struct video_status {
+	int                   video_blank;   /&#x22C6; blank video on freeze? &#x22C6;/
+	video_play_state_t    play_state;    /&#x22C6; current state of playback &#x22C6;/
+	video_stream_source_t stream_source; /&#x22C6; current source (demux/memory) &#x22C6;/
+	video_format_t        video_format;  /&#x22C6; current aspect ratio of stream &#x22C6;/
+	video_displayformat_t display_format;/&#x22C6; selected cropping mode &#x22C6;/
+};
 </programlisting>
 <para>If video_blank is set video will be blanked out if the channel is changed or if playback is
 stopped. Otherwise, the last picture will be displayed. play_state indicates if the video is
@@ -127,17 +179,17 @@ device.
 </para>
 </section>
 
-<section id="video_still_picture">
+<section id="video-still-picture">
 <title>struct video_still_picture</title>
 <para>An I-frame displayed via the VIDEO_STILLPICTURE call is passed on within the
 following structure.
 </para>
 <programlisting>
- /&#x22C6; pointer to and size of a single iframe in memory &#x22C6;/
- struct video_still_picture {
-	 char &#x22C6;iFrame;
-	 int32_t size;
- };
+/&#x22C6; pointer to and size of a single iframe in memory &#x22C6;/
+struct video_still_picture {
+	char &#x22C6;iFrame;        /&#x22C6; pointer to a single iframe in memory &#x22C6;/
+	int32_t size;
+};
 </programlisting>
 </section>
 
@@ -164,26 +216,26 @@ bits set according to the hardwares capabilities.
 </programlisting>
 </section>
 
-<section id="video_system">
+<section id="video-system">
 <title>video system</title>
 <para>A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The
 following system types can be set:
 </para>
 <programlisting>
- typedef enum {
-	  VIDEO_SYSTEM_PAL,
-	  VIDEO_SYSTEM_NTSC,
-	  VIDEO_SYSTEM_PALN,
-	  VIDEO_SYSTEM_PALNc,
-	  VIDEO_SYSTEM_PALM,
-	  VIDEO_SYSTEM_NTSC60,
-	  VIDEO_SYSTEM_PAL60,
-	  VIDEO_SYSTEM_PALM60
- } video_system_t;
+typedef enum {
+	 VIDEO_SYSTEM_PAL,
+	 VIDEO_SYSTEM_NTSC,
+	 VIDEO_SYSTEM_PALN,
+	 VIDEO_SYSTEM_PALNc,
+	 VIDEO_SYSTEM_PALM,
+	 VIDEO_SYSTEM_NTSC60,
+	 VIDEO_SYSTEM_PAL60,
+	 VIDEO_SYSTEM_PALM60
+} video_system_t;
 </programlisting>
 </section>
 
-<section id="video_highlight">
+<section id="video-highlight">
 <title>struct video_highlight</title>
 <para>Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight information. The
 call expects the following format for that information:
@@ -210,7 +262,7 @@ call expects the following format for that information:
 </programlisting>
 
 </section>
-<section id="video_spu">
+<section id="video-spu">
 <title>video SPU</title>
 <para>Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the
 following format:
@@ -224,7 +276,7 @@ following format:
 </programlisting>
 
 </section>
-<section id="video_spu_palette">
+<section id="video-spu-palette">
 <title>video SPU palette</title>
 <para>The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE:
 </para>
@@ -237,7 +289,7 @@ following format:
 </programlisting>
 
 </section>
-<section id="video_navi_pack">
+<section id="video-navi-pack">
 <title>video NAVI pack</title>
 <para>In order to get the navigational data the following structure has to be passed to the ioctl
 VIDEO_GET_NAVI:
@@ -252,7 +304,7 @@ VIDEO_GET_NAVI:
 </section>
 
 
-<section id="video_attributes">
+<section id="video-attributes-t">
 <title>video attributes</title>
 <para>The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES:
 </para>
@@ -347,8 +399,7 @@ VIDEO_GET_NAVI:
 <para>(blocking mode is the default)</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>ENODEV</para>
@@ -406,8 +457,7 @@ VIDEO_GET_NAVI:
 <para>File descriptor returned by a previous call to open().</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EBADF</para>
@@ -462,8 +512,7 @@ VIDEO_GET_NAVI:
 <para>Size of buf.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+<para>RETURN VALUE</para>
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
 <para>EPERM</para>
@@ -488,7 +537,7 @@ VIDEO_GET_NAVI:
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_STOP"
 role="subsection"><title>VIDEO_STOP</title>
 <para>DESCRIPTION
 </para>
@@ -543,26 +592,9 @@ role="subsection"><title>VIDEO_STOP</title>
 <para>FALSE: Show last decoded frame.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_PLAY"
 role="subsection"><title>VIDEO_PLAY</title>
 <para>DESCRIPTION
 </para>
@@ -596,26 +628,9 @@ role="subsection"><title>VIDEO_PLAY</title>
 <para>Equals VIDEO_PLAY for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_FREEZE"
 role="subsection"><title>VIDEO_FREEZE</title>
 <para>DESCRIPTION
 </para>
@@ -653,26 +668,9 @@ role="subsection"><title>VIDEO_FREEZE</title>
 <para>Equals VIDEO_FREEZE for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_CONTINUE"
 role="subsection"><title>VIDEO_CONTINUE</title>
 <para>DESCRIPTION
 </para>
@@ -706,26 +704,9 @@ role="subsection"><title>VIDEO_CONTINUE</title>
 <para>Equals VIDEO_CONTINUE for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_SELECT_SOURCE"
 role="subsection"><title>VIDEO_SELECT_SOURCE</title>
 <para>DESCRIPTION
 </para>
@@ -769,26 +750,9 @@ role="subsection"><title>VIDEO_SELECT_SOURCE</title>
 <para>Indicates which source shall be used for the Video stream.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_SET_BLANK"
 role="subsection"><title>VIDEO_SET_BLANK</title>
 <para>DESCRIPTION
 </para>
@@ -835,33 +799,9 @@ role="subsection"><title>VIDEO_SET_BLANK</title>
 <para>FALSE: Show last decoded frame.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal input parameter</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_GET_STATUS"
 role="subsection"><title>VIDEO_GET_STATUS</title>
 <para>DESCRIPTION
 </para>
@@ -903,33 +843,9 @@ role="subsection"><title>VIDEO_GET_STATUS</title>
 <para>Returns the current status of the Video Device.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error, possibly in the communication with the
- DVB subsystem.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>status points to invalid address</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_GET_EVENT"
 role="subsection"><title>VIDEO_GET_EVENT</title>
 <para>DESCRIPTION
 </para>
@@ -980,24 +896,9 @@ role="subsection"><title>VIDEO_GET_EVENT</title>
  stored.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>ev points to invalid address</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EWOULDBLOCK</para>
 </entry><entry
  align="char">
@@ -1009,16 +910,11 @@ role="subsection"><title>VIDEO_GET_EVENT</title>
 <para>EOVERFLOW</para>
 </entry><entry
  align="char">
-</entry>
- </row><row><entry
- align="char">
-</entry><entry
- align="char">
 <para>Overflow in event queue - one or more events were lost.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_SET_DISPLAY_FORMAT"
 role="subsection"><title>VIDEO_SET_DISPLAY_FORMAT</title>
 <para>DESCRIPTION
 </para>
@@ -1063,32 +959,9 @@ role="subsection"><title>VIDEO_SET_DISPLAY_FORMAT</title>
 <para>Selects the video format to be used.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal parameter format.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_STILLPICTURE"
 role="subsection"><title>VIDEO_STILLPICTURE</title>
 <para>DESCRIPTION
 </para>
@@ -1133,32 +1006,9 @@ role="subsection"><title>VIDEO_STILLPICTURE</title>
 <para>Pointer to a location where an I-frame and size is stored.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>sp points to an invalid iframe.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_FAST_FORWARD"
 role="subsection"><title>VIDEO_FAST_FORWARD</title>
 <para>DESCRIPTION
 </para>
@@ -1200,39 +1050,17 @@ role="subsection"><title>VIDEO_FAST_FORWARD</title>
 <para>The number of frames to skip.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EPERM</para>
 </entry><entry
  align="char">
 <para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
 </entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal parameter format.</para>
-</entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_SLOWMOTION"
 role="subsection"><title>VIDEO_SLOWMOTION</title>
 <para>DESCRIPTION
 </para>
@@ -1274,39 +1102,17 @@ role="subsection"><title>VIDEO_SLOWMOTION</title>
 <para>The number of times to repeat each frame.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EPERM</para>
 </entry><entry
  align="char">
 <para>Mode VIDEO_SOURCE_MEMORY not selected.</para>
 </entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>Illegal parameter format.</para>
-</entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_GET_CAPABILITIES"
 role="subsection"><title>VIDEO_GET_CAPABILITIES</title>
 <para>DESCRIPTION
 </para>
@@ -1350,25 +1156,9 @@ role="subsection"><title>VIDEO_GET_CAPABILITIES</title>
  information.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EFAULT</para>
-</entry><entry
- align="char">
-<para>cap points to an invalid iframe.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_SET_ID"
 role="subsection"><title>VIDEO_SET_ID</title>
 <para>DESCRIPTION
 </para>
@@ -1410,24 +1200,9 @@ role="subsection"><title>VIDEO_SET_ID</title>
 <para>video sub-stream id</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINTERNAL</para>
-</entry><entry
- align="char">
-<para>Internal error.</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1435,7 +1210,7 @@ role="subsection"><title>VIDEO_SET_ID</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_CLEAR_BUFFER"
 role="subsection"><title>VIDEO_CLEAR_BUFFER</title>
 <para>DESCRIPTION
 </para>
@@ -1468,18 +1243,9 @@ role="subsection"><title>VIDEO_CLEAR_BUFFER</title>
 <para>Equals VIDEO_CLEAR_BUFFER for this command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_SET_STREAMTYPE"
 role="subsection"><title>VIDEO_SET_STREAMTYPE</title>
 <para>DESCRIPTION
 </para>
@@ -1522,25 +1288,9 @@ role="subsection"><title>VIDEO_SET_STREAMTYPE</title>
 <para>stream type</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>type is not a valid or supported stream type.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_SET_FORMAT"
 role="subsection"><title>VIDEO_SET_FORMAT</title>
 <para>DESCRIPTION
 </para>
@@ -1583,17 +1333,9 @@ role="subsection"><title>VIDEO_SET_FORMAT</title>
 <para>video format of TV as defined in section ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1601,7 +1343,7 @@ role="subsection"><title>VIDEO_SET_FORMAT</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_SET_SYSTEM"
 role="subsection"><title>VIDEO_SET_SYSTEM</title>
 <para>DESCRIPTION
 </para>
@@ -1645,17 +1387,9 @@ role="subsection"><title>VIDEO_SET_SYSTEM</title>
 <para>video system of TV output.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1663,7 +1397,7 @@ role="subsection"><title>VIDEO_SET_SYSTEM</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_SET_HIGHLIGHT"
 role="subsection"><title>VIDEO_SET_HIGHLIGHT</title>
 <para>DESCRIPTION
 </para>
@@ -1705,25 +1439,9 @@ role="subsection"><title>VIDEO_SET_HIGHLIGHT</title>
 <para>SPU Highlight information according to section ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
-<informaltable><tgroup cols="2"><tbody><row><entry
- align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor.</para>
-</entry>
- </row><row><entry
- align="char">
-<para>EINVAL</para>
-</entry><entry
- align="char">
-<para>input is not a valid highlight setting.</para>
-</entry>
- </row></tbody></tgroup></informaltable>
+&return-value-dvb;
 
-</section><section
+</section><section id="VIDEO_SET_SPU"
 role="subsection"><title>VIDEO_SET_SPU</title>
 <para>DESCRIPTION
 </para>
@@ -1766,17 +1484,9 @@ role="subsection"><title>VIDEO_SET_SPU</title>
  to section ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1785,7 +1495,7 @@ role="subsection"><title>VIDEO_SET_SPU</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_SET_SPU_PALETTE"
 role="subsection"><title>VIDEO_SET_SPU_PALETTE</title>
 <para>DESCRIPTION
 </para>
@@ -1827,17 +1537,9 @@ role="subsection"><title>VIDEO_SET_SPU_PALETTE</title>
 <para>SPU palette according to section ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
@@ -1845,7 +1547,7 @@ role="subsection"><title>VIDEO_SET_SPU_PALETTE</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_GET_NAVI"
 role="subsection"><title>VIDEO_GET_NAVI</title>
 <para>DESCRIPTION
 </para>
@@ -1889,17 +1591,9 @@ role="subsection"><title>VIDEO_GET_NAVI</title>
  ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EFAULT</para>
 </entry><entry
  align="char">
@@ -1907,7 +1601,7 @@ role="subsection"><title>VIDEO_GET_NAVI</title>
 </entry>
  </row></tbody></tgroup></informaltable>
 
-</section><section
+</section><section id="VIDEO_SET_ATTRIBUTES"
 role="subsection"><title>VIDEO_SET_ATTRIBUTES</title>
 <para>DESCRIPTION
 </para>
@@ -1951,17 +1645,9 @@ role="subsection"><title>VIDEO_SET_ATTRIBUTES</title>
 <para>video attributes according to section ??.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
-<para>ERRORS
-</para>
+&return-value-dvb;
 <informaltable><tgroup cols="2"><tbody><row><entry
  align="char">
-<para>EBADF</para>
-</entry><entry
- align="char">
-<para>fd is not a valid open file descriptor</para>
-</entry>
- </row><row><entry
- align="char">
 <para>EINVAL</para>
 </entry><entry
  align="char">
diff --git a/Documentation/DocBook/media/dvbstb.png.b64 b/Documentation/DocBook/media/dvbstb.png.b64
new file mode 100644
index 00000000000..e8b52fde3d1
--- /dev/null
+++ b/Documentation/DocBook/media/dvbstb.png.b64
@@ -0,0 +1,398 @@
+iVBORw0KGgoAAAANSUhEUgAAAzMAAAGaCAYAAAA7Jx25AAAABmJLR0QAAAAAAAD5Q7t/AAAACXBI
+WXMAAA3XAAANiQFmEOuiAAAgAElEQVR42uzdd1RU18I28GdgKFZUBE0saFA0KoqFFkEhKhbAQmxJ
+bIkNNEpMEUwsMZarJMZrw4KxRExQczUqil0jRBA1GAjGQqLYC4TemdnfH76cj3HodYDntxaLmTll
+zuw57Zmz9z4yIYQAkYZzcnJCSkoKGjZsyMIgIiIiquPS09PRoEEDyBhmqCaQyWRo06YN3nvvPRYG
+ERERUR137Ngx/Pnnn5CzKKgmMDAwwKpVqxhmiIiIiAj29vZ4//33ocWiICIiIiKimohhhoiIiIiI
+GGaIiIiIiIgYZoiIiIiIiBhmiIiIiIiIYYaIiIiIiIhhhoiIiIiIiGGGiIiIiIgYZoiIiIiIiBhm
+iIiIiIiIGGaIiIiIiIgYZoiIiIiIiGGGiIiIiIiIYYaIiIiIiIhhhoiIiIiIGGaIiIiIiIgYZoiI
+iIiIiBhmiIiIiIiIYYaIiIiIiIhhhoiIiIiIqFLIWQRElSMsLAy2trZo1KgR5HJualTxEhIS8P33
+3+PDDz+sM5+5bdu2ePDgAZo2bcoVgCplm3J0dMS5c+fqzGf++uuvsWTJEm5TVClSU1ORk5ODBw8e
+oHXr1gwzRDVJbm4uAGDRokUwMDBggVCFmzlzJrKysurUZ3727BksLCzg4eHBFYAq3IIFC5CQkFCn
+PnNGRgYAYNWqVVwBqMJFRUVh48aNUCqVlfYeDDNElWzGjBkMM1QpNm7cWOc+c8uWLTFjxgzMmDGD
+KwBVuLt37yIkJKTOfW5nZ2duU1SpYaYysc0MERERERHVSAwzRERERETEMENERERERMQwQ0RERERE
+xDBDREREREQMM0RERERERAwzREREREREDDNERERERMQwQ0RERERExDBDRERERETEMENERERERMQw
+Q0REREREDDNEREREREQMM0RERERERAwzRERERETEMENERERERMQwQ0RERERExDBDREREREQMM0RE
+RERERAwzREREREREDDNEREREREQMM0RERERExDBDRERERETEMENERERERMQwQ0REREREDDNERERE
+REQMM0RERERERAwzRERERETEMENERERERMQwQ0REREREVGnkLAKimunBgwdISkoq8/SGhoZ47bXX
+WJCV6NmzZwgMDMS5c+ewd+9eFgiVSVZWFkJCQnD16lU8evQICoUChoaG6NChA2xsbNCxY0fIZDI8
+efIEp06dwuTJk0s876CgIJiYmKBLly4saKq2Y5Wuri6aNm0KQ0NDaGnxd3ZimCGqE/78808EBgbi
+p59+QkJCgsowLS0tyGQy6blSqYQQQmWcjz/+GGvXrmVBVoKtW7di+/btuHbtGoQQMDQ0ZKFQqf37
+77/w8fHBtm3bkJCQgCZNmsDS0hLGxsZ48OABtm/fjidPnsDU1BR2dnYICwtDz549SxxmlEol5s6d
+CxsbG+zZs4cFTpV2rDpx4gQOHDiAJ0+eqAzT09ODUqlETk4OAEBfXx/dunWDvb093Nzc0LdvX5Vj
+GVFBGH+JaqihQ4di06ZNOHr0qMrrly5dgkKhQG5urvSnVCqRlZWF27dvY8mSJQCA7OxsFmIlmTFj
+Bs6ePctfu6nMTp48iTfffBOrV6+Gnp4e9uzZg+fPn+PUqVPw9/fHkSNH8PDhQxw9ehRCCOzevRu3
+bt1CWlpaqd4jJiYG+/btw+PHj1noVGnHqnXr1uHcuXMqr+/fvx8ZGRnIzs5GSkoKIiIi8M0330BH
+Rwdr166Fvb09evXqhdOnT7MQiWGGqDazsrJSeV5Y1TFdXV107NgRX331FSZPniz9ElbTnDp1SuOX
+USaToXHjxujevTtXUCq1H3/8EcOGDcPz58/RtWtXREREYMKECdDR0VE9gGtpwcXFBdeuXYONjQ0A
+ID09vcTvs2HDBgBATk4OfH19WfBUqTp16gS5/P9XCDI3N5euujRs2BAWFhb46KOP8Ntvv+HIkSNo
+3rw5rl+/DicnJ3z66adQKpUsRGKYIaqNdHR0Sl3HeNy4cTXyysyBAwdq1EkX635TaV29ehVTpkyB
+UqlEw4YNcfToUbRs2bLIaZo0aYIjR47AyMioxFdm7ty5g6CgIGhrawMAtmzZgoyMDH4BVGlkMhl0
+dXVLNJ6rqyvCwsLQqlUrAMB3332Hjz/+mIVIDDNEtfkgURqOjo5YunRpjfqMd+7cwfTp0/llU62l
+VCoxY8YM6arp/Pnz0b59+xJNa2RkBC8vrxJfmfH19YWVlRUmTJgAAIiPj2cnFaRRxypTU1McOnRI
+CtwbNmzA4cOHWYjEMENUl+Xm5iIhIQH6+vowMTEpcJz8HQUIIdQ6DijoBKy0CppnUfN59uwZnJ2d
+S9V7mxCiVMtW2mWqiPckyu/EiROIiIgAAGhra8Pd3b1U00+aNAlZWVnFjpeamoqdO3di9uzZmD17
+tvT6f//732K3d6KqZGlpiRkzZkjPvby8it3HlmY/XNh+v6jtoCTHRU1RlmNSac8BGGaIqEpduXIF
+CxYsUHs9MTERfn5+sLa2xrVr15CSkoJJkyZBX18fbdq0QWRkpMrOLTAwEMOHD4epqSnat2+Pxo0b
+o3///vDz8yu0LU5ubi7Onz8PDw8PmJubS+87d+5cGBoaQi6Xw8LCQq2x5+XLl2Fra4s7d+4AAEJD
+Q+Hi4gIXFxfMnz9fZdzs7Gz4+vrC2toa+vr60NHRQdeuXeHj41PgSV5Zl+lVx44dw8CBA/Haa6+h
+Q4cO6NmzJw4cOFBn17OgoCC1XouoeD/++KP02NbWFkZGRqWa3sjICDt37ix2PH9/f8jlcowdOxaW
+lpawtrYGAERHR+Ps2bP8IjRQaGgooqKi6mTYnDNnjvT41q1buHTpkto4pdn3CyFw7do1eHt7o127
+dkhMTIQQAv7+/rCwsIBcLkfTpk3x8ccfS9Wxc3NzsXnzZvTu3Ru6urqoX78+3n33XbWeRPfv34/x
+48dLx6jFixdLw5KSkjB37lwMHz5cGp6/hkRsbCzmz58vDcv7++KLL5Cbm4vDhw9j7Nix0utz587F
+s2fPylUWZTkH0NTURqTxDAwMxN69e2vUMgcHBwsAIjExsdLfS1tbWwAQAMTdu3cLHW/hwoVi5syZ
+0vMrV66IESNGCF1dXWn63377TfTv31/o6+tLry1YsEAIIUR6eroYPXq00NPTE7t37xY5OTlCCCFu
+374t+vbtKwCIHj16iNjYWJX3PXXqlHBycpLm16JFCxEdHS06duwoHB0dhYuLi6hfv74AIHR0dMQf
+f/whTfvXX3+J06dPC2NjYwFA2NraitOnT4vTp0+L8PBwabynT5+KPn36iOnTp4vIyEjx6NEjcejQ
+IdGiRQsBQPTt21ekpaVVyDLlUSgUYvbs2UIul4stW7aI7OxsIYQQ0dHRwsLCQjRq1EgAEIaGhpXy
+vZubmwtfX1+NW/fzyrRdu3Zi5syZIiAgQDx58qRC5t22bVuN/MwVoVWrVlLZeXp6Vsp7KJVK0bVr
+V+Hl5SW95u/vL72vs7NznT7WeHt7Czs7O41brmnTpgkAwsDAQIwYMUKsX79eREZGCqVSWSGfuaq+
+9wYNGkjr2l9//VXi6dq3by9Nt3jxYpVhpdn3X7p0SYwePVrI5XKV5Rg8eLCwsrIS7u7u4u2335aG
+ff755+LJkyfirbfeEo6OjmLWrFli1KhRQktLSwAQrq6uast67949af6DBw9WGx4dHS0ds18td6VS
+KZYtWya9f+/evVWGr1y5Uujq6oqAgIACv/vSHgdLew5QFpGRkQKA2nlBRQgMDBQGBgaCYYYYZmpZ
+mDl48KAIDQ2V/i5duiTOnj0rvv76a6Grq6sSZtLS0kR2drZ0oAQgnJycxKFDh0RqaqqYOHGiaNKk
+iTh9+rRQKpVi7NixAkCBJ5MpKSmic+fOAoDo1KmTSElJURtn6NChAoDQ19cXlpaWIiIiQhr2xx9/
+SJ9jypQpatOamJgIAGLEiBFqw7Kzs0WfPn3EqFGj1Hbw+/fvlz6bt7d3hS7TokWLBACxZs0atWGP
+Hz+WDtx1Lcw0a9ZMKnMdHR3pwF4R4aa2hpnk5GSpzApbpyrC2bNnhUwmU/nRIzMzU/qxAIC4efMm
+w4yG8fDwkE6gtbS0hJ6eXoWFm5oQZkaOHClNN3r06HLv+xcsWCANs7GxUflhTKlUSu/XoEEDYWlp
+KS5cuKAy/erVq6XpY2Ji1JbX1NS00DCT/3hWULkrlUoxZMgQ6bvOK6f09HTRsWNH8d133xU4z7KU
+RWnOARhmiBhmqizMFPeXP8zk+eGHH6ThX331VYHvcezYMQFANG3aVGRlZRU4zpEjR6T5fPHFF2rD
+P/roI2n4s2fP1Ib369dPCkOlCTNbt24VAMS5c+fUhmVmZkq/MDVt2lS6mlTeZbpx44bQ1tYWhoaG
+hZbH8OHD62SYMTIyKnT9K2+4qa1h5p9//lEpp61bt1bK+4waNarAX5PzgjkAMWvWLIYZDQwz+a8m
+5P8rb7ipCWFmxowZ0nSOjo7l3vdv375dml9YWJjatPv27ZOGb9q0SW34zZs3peG7du1SG96pU6ci
+w0xe2Cms3O/fvy9d2XdychJKpVJMmzZNODg4CIVCUeA05TkOluQcQJPDjJw1UYlql5s3b6o07hdC
+IC0tDZcuXcKHH35Y4DT5718xZMiQAsfJ6xLZysqq0O41hw0bBmNjYzx//hxbt27F0qVLVe4rkNcr
+DQAYGxurTZ/XDWd8fHypPrOfnx8AIDw8HNHR0WrDmzVrhsePHyMhIQE3btxQuf9LWZdp3bp1UCgU
+GDhwYKHl0ahRI66Qr8jfpurevXvYsWMHvv/+e+Tm5qJdu3YYPHgwHB0d0b9//2K7JK7NFApFhc8z
+NjYWhw8fxvHjx9WGzZw5EytXroRCocCuXbuwfPlyNG3alCtsDZB3U+S8dhlHjx7FiRMnkJWVBQMD
+Azg4OGDAgAFwcHBAt27dSt37pSbIv8z5j1dl3ffn3+83aNCg0P1+3jxe1aJFC+nxw4cPK/zztmnT
+Bt988w3c3d1x6tQpTJo0CYcPH0ZUVFShXf6X5zhYknMATcYwQ1TL6OnpQV9fX+W1evXqYfjw4Viw
+YIHUkL4w+Xfy+Q+WFy5cAAA0b968yGn79++PAwcOID4+HtHR0ejRo0eJlz1vJy1K0cg1OTkZ165d
+g7a2dqGNzseMGaP2HuVZJiGE1EVo586dq/Uk5v79+7h27ZpGrYO5ubllDjfff/89tm/fDoVCIYWb
+3r17w9XVtVaHm1eDQ1xcXIW/x5YtW/DGG29g0KBBBZ68ubm54cCBA0hPT8f27dvx+eef18l9aFpa
+msZtUy9evChzuDly5AiCgoKQnZ2Nxo0bw9HREf369YO9vT369OlTI76Tf//9V3r8+uuvV/q+v6Dj
+oMrJc74f6Srr/kzTp0/Hvn37cP78efj7+2Pjxo2F9kJakWVR3GdnmCGqQ4QG9jrz9ttv4+7du6We
+Lj4+XroZX3Enqp06dZIeP3z4sFRhpizu3r0rdT+5Zs2aKtkRv3jxAk+fPgVQvVdfsrOzsWrVKqxa
+tarWbDf516979+5h69atUkifOnVqpVyx0ARNmjSRrmoCQExMTIXOPyMjA35+flAoFCq/yL66nefZ
+sGED5s2bp3LSVlfcuHGjxpzkl/RYlNcrV3JyMg4fPiz9GOPo6CiFA01269Yt6XHv3r2rbd9flbS0
+tODn5wdzc3NkZGTg1KlTmDVrVoFX1mp7WTDMEFWDFy9eYPny5Rq3XD179sTGjRtLPV3+E8i8k/jC
+GBoaSo+rYoeaF7KEELh//36JbzJYHvl/Nc/MzKy271NPTw/ffvttodUHq4uZmVmZryzo6ekhKysL
+enp6sLS0hJOTE/r37w8bGxvo6uoiMDCw1u437OzscPDgQQAvu+KtSAEBAUhNTYWPj0+Rv8quWLEC
+T58+xYMHD3Do0CGVX3Prip49exZYFa86ffbZZ/jhhx9KddUzj46ODpRKJZRKJTp06IChQ4fCwcEB
+ffv2hbGxMRYsWIDExESNPp5GRUVJz11cXKpt31/V0tLSpOPvkSNHsG/fPowfP14jjoMMM0S12Llz
+5zBgwABMnTq11nym5s2bQ0dHBzk5OYiOjoYQotB61/lv0PXGG29U+rLVr19fehwSElIlO3E9PT3p
+8d9//11t34tMJkP9+vU1rm1Daerk6+vrIzMzUyW8ODo6Ftk2q7YaO3asFGbu3LmDqKgo6f5H5SGE
+wIYNGzBmzBjMnTu3yHHj4+Px1VdfAXh5E826GGby7jOiSfLvc4qjq6sLhUIBpVKJjh07YsiQIXBw
+cIC9vX2R1YQ11c6dO6WaDi4uLmjXrl217furUlZWFiZMmIClS5di48aNePToEebMmYMBAwao3YOq
+tpdFcXjTTKIKolQqsXz5cgwYMAAAMHz48Fp1cM+7sV5cXBxu3LhR6Lh59XVbtWqFjh07VvqymZqa
+SifPfn5+RVbvS01NxcyZM8v9nq1bt5YaTF64cIF3TS+FvPZcenp6sLOzwxdffIHg4GAkJycjODgY
+ixYtgp2dXZ0LMgDg5uamchLy3XffVch8L168iIiICEyfPr3YcWfOnCmt25cuXUJ4eDhXWg2nq6sL
+bW1tyGQymJmZwd3dHQcOHMCLFy9w69YtrFu3DqNGjaqRQebx48dSNVpdXV2sXr26Wvf9FaUkx4yF
+CxeicePGmD9/PjZv3iwdfz09PTXiOMgwQ1TLvHjxAoMGDcKSJUsAvLxjcUE9oFTWTjH/1ZDKOrH+
+4IMPpMcBAQGFjpd38uPu7l7qXnOKWva8eeXV/c7TqFEjKWgFBwdjz549BU6fm5uLKVOmwMnJqdzL
+pKenh/79+wN4WVc5KCioyGnrWtjJq/Lwanixt7dneCmCjo4ONm3aJD3ftWsXTp8+XeLpExMT4erq
+qnZX8NWrV8PMzAz29vbFzqNly5YYPXq09Hzt2rXcwWsApVIpVTcqaXjJX+W3Jp3E50lISMDIkSOR
+kJAAANi0aRO6dOlSZfv+8sirYp2enl5gGaSkpBQ5/a+//oqNGzfCz88PWlpacHV1xbvvvgsA+Omn
+n3D06NEqPQ4yzBDVcufPn0fXrl1x8eJFKJVKaGlp4bPPPquy909PT1c5QJSlZ5X8YaiwOtmTJk2C
+paUlAGDz5s0F1rG+ffs2goODYWZmhnnz5qkNL67xdl7PVgUd8PKqfdy+fVsanp2djcePH6v8UjVt
+2jSsX79e6s0HeFllx8XFBdnZ2XBzc6uQZcr/+Tw8PNS650xMTERISAiAl41uU1NT68w2kXcAfzW8
+XLx4keGlGEOHDsWaNWuk525ubiVqJxQaGgpLS0v069dPpdvYK1euICgoCGPGjCnxjwvvvfee9PjA
+gQPVWpWS/v8JsBCixoWXV/e1+dsYFhZshBA4deoU+vTpgytXrkBXVxfbtm3DtGnT1MYt674//zGv
+LMfE4n5AzLvCevnyZdy+fVulDFasWCHtIwu6DUFycjImT56MBQsW4M0335ReX7dunfQdu7u7qx2D
+y3McLMk5AMMMUS2kVCrx9ddfY+DAgYiPj0dubi7kcjnGjx+Ptm3bVtlynDx5UuV5YVcJipK/u+bf
+f/+9wHHkcjkOHTqETp06IT4+HhMmTFD5BT4hIQETJ05EmzZtEBgYWGDf/flPivJ6bcp/QPjzzz8B
+vOxONDk5WWW4ra2tNI/58+fj4MGDeOedd/Dvv/9i3LhxGDdunBQ+PD090bx5c/To0QOmpqYwMzND
+UlIS/P391U7oyrpMw4YNg4eHBwDg/v376NWrF1asWIHAwEBs27YNjo6OMDAwkA4O3bt3r3WX9gtz
+7do1ZGVlMbyU0SeffIJ9+/ahWbNmSE1NhaurK9zc3HDy5EmVX3pTU1MRFBSEd955By4uLli2bJlK
+d8qZmZmYNWuWtP2WVF6bhLyTr3nz5hV78keVa968eYiLi6tR4eVV58+fV1mP9u3bh5iYGPz999/4
+/fffcfjwYSxatAg9evTA4MGDce/ePbi5ueH69euFVpEs674/f2+BBQWK2NhY6XFB1aofPHggPX78
++LHa8LyaDNnZ2bCzs4OXlxe8vb1hbm4OIQQcHBwAAGFhYXj//fdx7Ngx6bxi2rRpUCqV8PLyUpmn
+kZGRVPvj8ePHmDJlikrwKM9xsCTnAJqe9ok0noGBgdi7d6/GLM+TJ0+Eg4OD2h2ZZTKZiIyMFEII
+ERwcLACIxMTESlkGPz8/MWjQoALvCm1nZyc+/fTTYudx5swZ4erqKrS0tKRp9fT0xKRJk8T27dsL
+nCYpKUnMmzdPNGrUSLz++utixowZ4sMPPxQmJibC3d1dxMXFqU0TGhoqxo8fr7KMXbp0EV9++aUQ
+QoiTJ08KJycnleE9e/YU27Ztk+YRGxsrWrduLQ1//fXXxfnz56XhOTk5YsmSJdJdk/P+DAwMxMKF
+C0VGRkaFL5NCoRDffPONaNq0qcp4JiYm4ty5c+L9998XhoaGwsPDQwQHBxd65+ayMjc3F76+vnVq
+X9C2bds685nj4uLEkiVLRNu2bVX2MYaGhqJZs2YCgGjTpo1YtGiR2na3f/9+0blzZ2k6uVwuRo0a
+JY4fP17o+/31119i8uTJol27dmr7lN69e4tffvml1pe5t7e3sLOzq1PblLe3d6F3oq+oY5WTk5PQ
+1dVVW6/y/zVu3Fh06dJFjB07VmzatEk8fPiwRPMvzb7/119/FbNmzRJ6enoq+2tvb28RGxsr/v77
+bzFv3jzRvHlzabiurq7w8PAQFy5cEBkZGeLzzz8X7du3V9m23N3dRWBgoPQ+SqVSLF26VOX43KxZ
+M+n44ezsLNq3by+8vb1FaGioyM3NFcHBweLtt98WAISRkZHw8fFR+Zznzp0TDg4OKp/R1tZWZZsu
+7XGwLOcApRUZGSkAiNjY2ApftwIDA4WBgYGQCbZcpRqgSZMm8PX1Van+UJ2/Lo0ZMwYpKSkq7Tfk
+cjkcHR1x6tQpAC97FLG3t0diYqL0C31tkpWVhT/++ANxcXFo2rQpevToodKjSmVIS0tDWFiY1PNV
+QT38ZGRk4Pr160hISICRkRG6d+9eqp6AyloW169fR1xcHIyNjdGzZ0/I5XLExMTAxMRE5e7KFal7
+9+7w8PCQrhDVBSYmJvD29q5Tn1kIgdu3b+PPP/9EXFwclEoljI2N0bVrV3Tq1KlG3tFdUy1YsAAh
+ISEIDg6uU585Kiqqxnd7Xh37/uK8ePEC169fR7169dCnTx+pDeE///yDdu3alfomzjWxLKKiotC9
+e3fExsZWeK2VY8eO4f3332fXzEQlpVAosGzZMixbtky6HPzq8C+++KLOlIeenh6srKyq9D0bNGgg
+9RZXmHr16klV0qqyLPIaX+bXoUMHbjhUbjKZDJ06dVK5IS0RVf++vzhGRkYYNGiQ2uuVfdsCTSyL
+ysQwQ1QCT58+xZgxYxAWFlZg3XEtLS1YWFhI9WCJiIiIqPKxAwCiYpw5cwbdunVDeHh4kb18LFy4
+kIVFRERExDBDVP0UCgUWL14MJycnJCQkqN3fJI9MJoOJiQlGjBjBQiMiIiKqQqxmRlSAR48eYfz4
+8QgLC5P69y+MtrY2vvjii0pryEdEREREDDNEJXLq1CkMHjwYurq6Jbp5lIGBASZNmsSCIyIiIqpi
+/CmZKB8hBPbv3w8AhVYry09XVxdeXl68ISARERERwwxR9ZLJZNi+fTvWr18PLS2tYquO6ejoYMaM
+GSw4IiIiIoYZIs0wZ84cnDlzBo0aNSr0hoe6urr46KOPauUNMYmIiIgYZohqMEdHR4SGhkJbW7vA
+O2wrlUp4enqyoIiIiIgYZog0z6pVq9CsWTO4uLhAW1tbel1XVxeTJ0/Ga6+9xkIiIiIiYpgh0izr
+1q1DQEAA/ve//+Hw4cNYvnw5tLS0IJPJkJ2dDS8vLxYSEREREcMMkWa5cOECPvvsM/j6+sLGxgYy
+mQze3t4IDAyEEAI2Njbo2LEjC4qIiIioGvE+M0SvuH//PsaOHYtp06Zh6tSpKsOGDh2KW7duISsr
+iwVFRERExDBDpDnS09Ph5uYGMzMzrFu3rsBxzMzMWFBEREREDDNEmsXDwwNPnz7F1atXeSNMIiIi
+IoYZopohr8H/r7/+ipYtW7JAiIiIiBhmiDRfXoP/LVu2wMbGhgVCREREVAOwNzOq84pq8E9ERERE
+DDNEGqkkDf6JiIiISDOxmhnVaWzwT0RERFQLwsz333+P77//Hg0aNGCpUIVTKBTIycnB//73Pxgb
+G2vEMrHBPxEREVEtCTMxMTEIDQ2Fl5cXS4UqXFRUFM6fP4/MzEyNWB42+CciIiKqRWEGAJydnbFq
+1SqWClVKmDl+/LhGLAsb/BMRERHVDuwAgOoUNvgnIiIiqj3YAQDVKWzwT0RERMQwQ1TjsME/ERER
+EcMMUY3DBv9EREREtQ/bzFCtxwb/RERERAwzRDUOG/wTERER1V6sZka1Ghv8ExERETHMENU4bPBP
+RERExDBDVOOwwT8RERFR7cc2M1TrsME/EREREcMMUY3DBv9EREREdQermVGtwgb/RERERAwzRDWO
+pjb4X716NQwMDPgFUYWLioqqc5/54cOHWL16NZKTk7kCUKXsr83Nzevc5z527BhWr17NFaAYycnJ
+uH//Ptq1a4eGDRuyQDTkOMUwQ7WCJjb4b9iwIUxMTHDixAloabFGJ1W8Nm3awMjIqE59ZkdHR9y/
+fx8HDhzgCkAVrl27dujZs2ed+sytWrVCmzZtuE29QqlUIi0tTeUvJycHMpkM+vr66NKlCwupBLKz
+s2FqalqptWUYZqjG09QG/xYWFrh37x6/IKIKdObMGRYCUQX66KOP8NFHH9XpMlAoFIiOjkZ4eDgu
+X76My5cv48aNGxBCoHPnznBycoKVlRVsbGwQFRWFhQsX4urVq1x5NATDDNVobPBPREREpfHo0SMp
+tFy+fBnXrhOJlUQAACAASURBVF1DamoqWrZsCWtra4wfPx42Njbo06cPGjdurDLtjRs3WIAMM0QV
+hw3+iYiIqDCpqam4evUqwsPDERYWhvDwcDx69Aj169dH7969YWVlhdmzZ8Pa2hpt27ZlgTHMEFUd
+TW3wT0RERFWvuOpi1tbWWLhwIWxsbNCtWzfI5TwNZpghqiaa2OCfiIiIqk55qosRwwxRtdHUBv9E
+RERUOVhdjBhmqFZgg38iIqLajdXFiGGGai02+CciIqpdWF2MGGaoTjhx4gT27dvHBv9EREQ1FKuL
+EcMM1Um5ubn48ccfsXXrVjb4JyIiqgFYXYwYZojwssF/eno63n77bTb4JyIi0lCsLkYMM0SvyGvw
+r6WlhUmTJrFAiIiINACrixHDDFEJeHh44NmzZ2jQoAEvPxMREVUDVhcjhhmiMli3bh0CAgLw66+/
+YsiQISwQIiKiKlCS6mLW1tawtLRkdTFimCEqyIULF/DZZ59hy5YtbPBPRERUSVhdjBhmiCrY/fv3
+MXbsWEybNo0N/omIiCoIq4sRw0wVCAoKgomJCbp06cJvpw7Ka/BvZmaGdevWsUCIiIjKiNXFiGGm
+iimVSsydOxc2NjbYs2cPv506KK/B/5UrV6Crq8sCISIiKgFWFyOGGQ1w8uRJxMTEIDY2FqtXr8br
+r7/Ob6gOyd/gv2XLliwQIiKiAigUCty4cUPlqgurixHDjAbYsGEDACAnJwe+vr5Yvnx5lb7/qVOn
+4OTkxLWiGrDBPxERUcFYXYyoBoSZO3fuICgoCNra2lAoFNiyZQu+/PJL1KtXr0re/8CBA9i7dy/D
+TDVgg38iIqKXWF2MqIaGGV9fX1hZWeHNN9/E7t27ER8fj71792LatGlVEqSmT58OBwcHrhFVjA3+
+iYiormJ1Mc329OlThISEYPTo0UWOFxMTg3/++Yc/iNflMJOamoqdO3di/fr1UpgBgP/+97+YOnUq
+ZDJZieclhFAbX6lUQktLq8Dxnz17BmdnZyQlJZVqmYUQEEIUOt/yLFNFTfvqfACUqiyrAhv8ExFR
+XcHqYjXLzZs3MW7cOMTFxaFp06aFjrdnzx4cPXqUYaaaaGnCQvj7+0Mul2Ps2LGwtLSEtbU1ACA6
+Ohpnz54tdvrc3FycP38eHh4eMDc3BwAkJiZi7ty5MDQ0hFwuh4WFBU6fPq0y3eXLl2Fra4s7d+4A
+AEJDQ+Hi4gIXFxfMnz9f7X2ys7Ph6+sLa2tr6OvrQ0dHB127doWPjw+ysrIqZJnKO21+V69excSJ
+E2Fvb4/Bgwejbdu26N27N3bs2CGFm+qU1+D/wIEDbPBPRES1SmpqKi5cuAAfHx+4ubmhdevWaN26
+NSZOnIjQ0FD06dMHO3bsQGxsLJ48eYJffvkFX3zxBQYMGMAgoyFsbGygq6uLkJCQIse7cOECHB0d
+WWDVRfwfb29v4ezsLKqaUqkUXbt2FV5eXtJr/v7+AoAAUOwynTp1Sjg5OUnjt2jRQkRHR4uOHTsK
+R0dH4eLiIurXry8ACB0dHfHHH39I0/7111/i9OnTwtjYWAAQtra24vTp0+L06dMiPDxc5X2ePn0q
++vTpI6ZPny4iIyPFo0ePxKFDh0SLFi0EANG3b1+RlpZW7mUqz7T5bdq0SchkMuHp6SkUCoUQQoi0
+tDRhZ2cnAIgVK1ZU6fccGRkpAIjY2FghhBDnz58XcrlcbN++vUTTGxgYiL179woiIiJNk5ubKyIj
+I4Wfn5+YNm2aMDc3F9ra2kJLS0t06dJFfPDBB2Lz5s0iIiJC5OTksMBqkH79+olPPvlEer53717R
+tm1b6Xl6errQ09MTR44cYWFVscDAQGFgYCCqPcycPXtWyGQycffuXem1zMxMKWAAEDdv3ix2PkOH
+DhUAhL6+vrC0tBQRERHSsD/++ENoa2sLAGLKlClq05qYmAgAYsSIEQXOOzs7W/Tp00eMGjVKKJVK
+lWH79++XltPb27vClqk80z548EAafurUKZVhAQEBAoBo1KiRyMrKqpYwExsbK4yMjIS7u3uJp2eY
+ISIiTfHw4UPxv//9T8yfP1/0799fNGzYUAAQLVu2FCNGjBArVqwQZ86cEUlJSSysGm7x4sWiZ8+e
+hYaZ8+fPC21tbZGQkMDCqqYwU+3VzDZu3AgXFxe0a9dOek1PTw8zZ86Unq9fv77Y+ZiamgIAMjMz
+ERgYCAsLC2lY9+7d0bdvX6kqWWnt3LkTV69exZw5c9TanAwfPhz6+voAgK1btyI3N7dClqk8096+
+fRsKhQIAEBcXpzLM2NgYAJCSkoK7d+9W+fedkZHBBv9ERMTqYlQjODo64o8//kBCQkKBw8+fP4/u
+3bujSZMmLKxqUq0dAMTGxuLw4cM4fvy42rCZM2di5cqVUCgU2LVrF5YvX15k4yttbW21E/b8WrVq
+BQCIj48v9XL6+fkBAMLDwxEdHa02vFmzZnj8+DESEhJw48YNdO/evdzLVJ5p+/Xrh08//RRZWVkY
+OXKkyrD8Yay0nR5UhC+//JIN/omISCOxdzF6lY2NDXR0dBASEgJXV1e14WwvU8fDzJYtW/DGG29g
+0KBBBZ6su7m54cCBA0hPT8f27dvx+eefl/m98nr/EqVs+J6cnIxr165BW1sbT548KXCcMWPGqL1P
+ZS5TcdPK5XJ8++23Kq+lp6cjICAAO3bskF5TKpVV/p0fOXIEFy9eZIN/IiKqduxdjIqjr68Pa2tr
+XLhwQS3MZGRk4PLly/jss89YUHUxzGRkZMDPzw8KhUK6kvGq/FcdNmzYgHnz5lX5ryB3796FEAJK
+pRJr1qxRuWJSE9y7dw/r16/HrVu3MHXqVCxZsqRauw5csWIFbGxsuOUREVGV4s0oqawcHBxw9OhR
+tdcvX76M3Nxc2Nvbs5DqYpgJCAhAamoqfHx8iryasWLFCjx9+hQPHjzAoUOHVK6CVIW0tDQAL6+A
+3L9/H+3bt68RX2xaWhoWLFgAf39/+Pr6Ys2aNZDJZLhw4UK1Ltft27dx//59HiiIiKjSsLoYVSRH
+R0csX74ciYmJKq+zvUwdDjNCCGzYsAFjxozB3Llzixw3Pj4eX331FYCXN9Gs6jBTv3596XFISEiN
+CDNJSUlwdHREREQEgoKCMGTIEI1Ztl69esHExASTJk2Cn58f280QEVG5sboYVaa8djPBwcEqr7O9
+jGaolt7MLl68iIiICEyfPr3YcWfOnAkdHR0AwKVLlxAeHl6ly2pqaio1mvfz8yuyfUtqaqpKL2zV
+ZeXKlYiIiICJiYlGBRkAcHZ2BgD88MMPePPNN3HixAluhUREVGLsXYyqWv52M3ny2ss4ODiwgOpi
+mFm9ejXMzMxKVMewZcuWGD16tPR87dq1ZXrPokJIXljJzs5WG9aoUSNYW1sDAIKDg7Fnz54C55Gb
+m4spU6aUqj1KWRr+l2TavN7h9PT01Ibl5ORU+0oXFRUF4GV7JGdnZ4wcORL//PMPt0YiIlKhUCgQ
+FRWF7du3Y/r06VKVngEDBmD37t1o0qQJFi5ciIiICCQlJeHixYv49ttvMWbMGFZnpgrl4OCA8+fP
+S8/DwsLYXqauhpkrV64gKCgIY8aMUbtnS2Hee+896fGBAwfw999/F7jDK0reSXxBISCvy+fbt29L
+w7Ozs/H48WMAgKenpzTutGnTsH79emRlZUmv3blzBy4uLsjOzoabm1uFLFN5ps3rpezOnTv4888/
+pdczMzOxe/dulV8VyhuqyqJbt2745JNPYGBgAF1dXcTExKBbt2746quvpGUiIiLNdP36ddy5c6dS
+5v3o0SMcPHgQXl5ecHBwQJMmTdC9e3csWrQIL168wPjx43Hy5EkkJCQgOjoaO3bsgLu7OywsLNju
+hSpV3v1m0tPTAbysYtajRw+2l6lrYSYzMxOzZs0CgFLtdPLfUFOhUGDevHlq3QrnDzjPnz9XGSaE
+kE7qk5KSkJycrDLc1tZWmsf8+fNx8OBBvPPOO/j3338BAOPGjcO4ceOkEOHp6YnmzZujR48eMDU1
+hZmZGZKSkuDv768S0MqzTOWZNu/qkBACgwYNwsKFCzF79mz06NEDXbt2lcZbtWoVlixZgh9++KHK
+V7wlS5ZAX18fPXr0wN27dzFr1ixs3rwZXbp0waFDh7hlEhFpmN9//x0jR45Er169EBAQUO75sboY
+1SR57WZu3rwphRlWMdMQ4v94e3sLZ2dnUVn2798vOnfuLAAIAEIul4tRo0aJ48ePFzrNX3/9JSZP
+nizatWsnTZf317t3b/HLL7+I0NBQMX78eJVhXbp0EV9++aUQQoiTJ08KJycnleE9e/YU27Ztk94n
+NjZWtG7dWhr++uuvi/Pnz6ssS05OjliyZIlo1KiRyrwMDAzEwoULRUZGhjRueZapIj5PUlKScHBw
+UBnH2dlZxMTECIVCIczNzaXXR40aJdLT00Vli4yMFABEbGys9NquXbuEvr6+mDx5sqhfv744dOiQ
+mDt3rpDL5WLIkCHi1q1b0rgGBgZi7969goiIqtaVK1eEq6urkMlkwsnJSYSEhJR6Hrm5uSIyMlL4
++fmJadOmCXNzc6GtrS20tLREly5dxAcffCA2b94sIiIiRE5ODgudNFK/fv3EsGHDRJs2bYSenp44
+cuQIC6UaBQYGCgMDAyET/1fHaMGCBYiKikJgYGCdDHVpaWkICwuDnp4eLC0tC2xvArysmnX9+nUk
+JCTAyMgI3bt3L3Tcag6piIyMxJMnT/Dmm2/CxMREGpaSkoLQ0FA0b94cPXv2LHF1v/KIiopC9+7d
+ERsbK9VjFkLA3t4eTZo0QYcOHeDn54fDhw+jRYsWmDNnDkJDQ/HJJ5/gyy+/ROvWreHr66tS5ZCI
+iCpPeHg4vv76axw7dgxDhgzB4sWLpZoMxSmudzErKyv2LkY1zpIlS+Dv74/U1FTEx8cjLi6O1cyq
+0bFjx/D++++DFUz/T4MGDTBgwIBix6tXr16Jd+bVSSaToUePHujRo4fasEaNGlXrjTPzL+PGjRvR
+p08f/PLLLwCAESNG4PDhwzh//jwCAgLw6aefwt/fXyM6LiAiqgvCwsLw9ddfIygoCMOGDUNYWJjU
+EU5BeDNKqivy7jfToEEDtpfRIAwzVK0sLCwwY8YMzJs3D5GRkSqB5t1334Wrqyu+/vprfPPNN1i+
+fLlaux8iIqoYv/32G77++mucPn0azs7OCA8Ph6Wlpco4vBkl1WXW1taQy+VISUlhexmGGaL/b9my
+Zfj555/x7bffSl1v5wWagQMHwsfHB1u2bIFcLoeFhQXmzJmDxYsX8xcRIqIKEBwcjKVLl+LcuXNw
+dXXFlStX0Lt3bwBFVxezsrLizSipTqlXrx7Mzc1x7do1hhmGGaL/z9DQECtXroSnpycmT55cYKDR
+0tKCt7c39PX1MW/ePAQEBGD9+vUq9yAiIqKS+/XXX7F06VJcuHABI0eOREhICLKzs3H27FmsWLGC
+1cWICtC8eXMA4P1lGGaIVH344YfYunUrPv30Uxw4cEAt0ORxc3PD0KFDsXLlSrXuuYmIqHjnz5/H
+0qVLERwcjF69emHUqFG4c+cO+vXrx+piRMXw9vbGixcvWDuEYYZIlZaWFjZs2IC+ffvi1KlTcHJy
+Ugk0+Xtcq1evHpYtW8ZCIyIqhb1792LChAkAAG1tbSiVSsTGxsLIyAgjR47E2rVrWV2MqBjW1tYY
+PHgwC4JhhkidjY0NPvzwQ3h6eiIyMhI6OjpSoFm/fr10o9Ca4s8//8TEiRPRrFkzaGlp8QumCvf8
++XMsX74crq6udeYzv/POO3j48CFPuEshOTkZMTEx0o2ggZcN+QHgxYsXCAoKQlBQEJYtWwaZTCZd
+hcn7r6Ojo/JcLpdDJpNBW1sbLVq0gKGhYa0pq3///RdvvfUWNmzYUGfWj++//x7r16+HsbExN5YS
+ysrKwqBBg1gQJZCdnY309HQcO3as0tYxhhnSKCtXroSZmRnWrVuHzz77DDKZDGvXrsWWLVuwZs0a
+vP322xg4cGCN+CyJiYm4fv063N3dYWBgwC+XKtzq1avx8OHDOvWZDx48iMaNG8PDw4MrQCk4OjpK
+ISYnJ0f6r1QqkZ2drfZfCIGsrCzpf94JHABkZmZK/9u3b4+OHTvWqm0qOzu7Tq0bMTExiIyMhJeX
+FzcUqnBRUVG4ePGitN9gmKFaz8jICEuXLsWXX36Jd999F61atYJMJoO+vj5sbW1VOgWoKVatWsUw
+Q5Xi+PHjde4zt23bFt7e3gwzVClkMhlCQkLq3Od2dnbGqlWruAJQpYSZyj5Wse4LaZzZs2ejQ4cO
+mD9/vsrrEyZMwPTp0zFixAicOXOGBUVERERUxzHMkMbR1tbG+vXrERAQgODgYOn1vCpnDDRERERE
+BLCaGWkoe3t7zJw5E8+ePVN5PS/QAKiRVc6IiIiIiGGG6gBfX98CX2egISIiIiKGGaqxGGiIiIiI
+iGGGGGiIiIiIiGGGiIGGiIiIiBhmiBhoiIiIiIhhhhhoiIiIiIhhhoiBhoiIiIgYZogYaIiIiIiI
+YYaIgYaIiIiIYYaIgYaIiIiIGGaIGGiIiIiIiGGGiIGGiIiIiBhmiIGGiIiIiBhmiBhoiIiIiIhh
+hoiBhoiIiIgYZogYaIiIiIgYZogYaIiIiIiIYYaIgYaIiIiIGGaIGGiIiIiIGGaIGGiIiIiIiGGG
+iIGGiIiIiBhmiBhoiIiIiIhhhoiBhoiIiIhhhoiBhoiIiIiqNcxcuHABZ86cYalQhYuKimKgISIi
+IqLKCzNpaWkYNGgQS4XqPAYaIiIiohoUZv7zn//gP//5D0uEiIGGiIiIqGaFGSJioCmMEALh4eE4
+ceIEnj17BmNjY1haWuLtt99GvXr1kJiYiJ9//hnTpk2Tpnnw4AGSkpLK/J6GhoZ47bXXih0vKysL
+ISEhuHr1Kh49egSFQgFDQ0N06NABNjY26NixI2QyGZ48eYJTp05h8uTJXLGpWgUFBcHExARdunTR
+mGV69uwZAgMDce7cOezdu1dl2L179+Dh4QEDAwNs3boVBgYG/BKpytbLFy9eFDq8adOmaNWqVYHH
+rOjo6AKnad++PRo0aFBh63ZR2w4xzBAx0GiAFy9eYNKkSThx4gSaN28OW1tb3L9/H76+vsjKyoKL
+iwsePnwIuVyuEmb+/PNPBAYG4qeffkJCQoLKPLW0tCCTyaTnSqUSQgiVcT7++GOp3Avy77//wsfH
+B9u2bUNCQgKaNGkCS0tLGBsb48GDB9i+fTuePHkCU1NT2NnZISwsDD179mSYoWqlVCoxd+5c2NjY
+YM+ePdW+PFu3bsX27dtx7do1CCFgaGioNs6aNWtw4sQJAICtrS08PT35RVKV+Oeff+Dn54ddu3ap
+HCM6deqE8ePHo1+/foWGmaCgIPz22284fPgwAMDAwACzZs3CRx99JIWZ8qzbJdl2qIoIohrAwMBA
+7N27t1qXQalUCk9PT1G/fn1x+vTpYscPDg4WAERiYmKNLfeMjAxhYWEhAIjJkyeLjIwMaVh2drbY
+vHmzqFevngAgOnfuXOA8QkJCBADpLyQkpMDxsrKyxO3bt8WSJUsEADFr1qxCl+vEiRPC2NhYABAt
+W7YUe/bsEdnZ2SrjKBQKcfToUfHGG29I7+3q6lqrtgtzc3Ph6+tbp/YFbdu2rdGf+fjx4wKA0NHR
+EY8ePar25VEqlSIpKUl07dpVABCGhoZq42zbtk0AEDKZTJw9e7ZWr1/e3t7Czs6uTm1T3t7ewtnZ
+WaOX0cfHR+U48tNPP5V42i5duggA4sSJExW6bpdk2yEhIiMjBQARGxtb4fMODAwUBgYGQotxjqh0
+V2imT5+OESNG1Ime/7Zt24br16+jSZMm2Lx5M/T19aVhOjo6cHd3x5kzZ1CvXj08evSowHlYWVmp
+PC/oVzQA0NXVRceOHfHVV19h8uTJyMnJKXC8H3/8EcOGDcPz58/RtWtXREREYMKECdDR0VG7+uPi
+4oJr167BxsYGAJCens4VmarVhg0bAAA5OTnw9fXViP1a48aN0b1790LHmT59Oi5fvoyoqCi8/fbb
+/BKpys2bNw9vvvmm9DwkJKSkP9gjLi4OdnZ2GDx4cIWu2yXZdqhqMMwQMdAU6siRIwAAU1NT1KtX
+r8Bx3nrrLXzzzTdISUlBSkqK2nAdHR1oaZVuVzNu3DhkZ2ervX716lVMmTIFSqUSDRs2xNGjR9Gy
+Zcsi59WkSRMcOXIERkZGSEtL40pM1ebOnTsICgqCtrY2AGDLli3IyMjQjJOBYrZRKysrdO3alV8i
+VQu5XI7FixdLz/39/Uu0Pw8PD8fz58/x0UcfVdq6XdrjGzHMEDHQVKHHjx9LJ2FFXdWYPn06WrRo
+IY1fUJmVhqOjI5YuXarymlKpxIwZM6QrNvPnz0f79u1LND8jIyN4eXnxygxVK19fX1hZWWHChAkA
+gPj4eDYYJiqh0aNHw8TEBACQlJSEHTt2FDvN999/j+bNm2PkyJEsQIYZIqqLgaZJkyYAgOTkZCxY
+sKDQ8XR1dTFp0iT8+++/5X7PFy9eQF9fXzpo5Tlx4gQiIiIAANra2nB3dy/VfCdNmoSsrCyuvFQt
+UlNTsXPnTsyePRuzZ8+WXv/vf/+r1vlFVRBCQKlUlmm6kirL/IkKI5fL8fHHH0vP165dC4VCUej4
+KSkp+PHHHzF58mTo6elV2Lpd1m2nPNNyW2KYIWKgKaP8N9Fdv349Pv744wKrfwGAj48PbG1ty/V+
+SqWy0J7ifvzxR+mxra0tjIyMSjVvIyMj7Ny5kysuVQt/f3/I5XKMHTsWlpaWsLa2BgBER0fj7Nmz
+RU67f/9+jB8/Hi4uLnBxcVGpbpOUlIS5c+di+PDh0vBXr2rmd+zYMQwcOBCvvfYaOnTogJ49e+LA
+gQNFvn9KSgp++OEHDB48GOvWrSvyRC0wMBDDhw+Hqakp2rdvj8aNG6N///7w8/MrtB0cUUlNnTpV
+6j757t27Uk9lhR0z0tLSMH369HKv22XddgAgOzsbvr6+sLa2hr6+PnR0dNC1a1f4+PgU+gMbt6XS
+p0Qi9mZWCb2c1YbezOLi4sRrr72m0ouMhYWFCA8PL9V8tLW1penv3r1b6HghISHCxMSkwGGtWrWS
+5uHp6cmNgr2Z1RhKpVJ07dpVeHl5Sa/5+/tL63NJepK6d++ekMvlAoAYPHiw2vDo6GhpOytofgqF
+QsyePVvI5XKxZcsWqfe/6OhoYWFhIRo1aqTWI1N0dLQYO3as0NfXl5b1m2++KXD50tPTxejRo4We
+np7YvXu3yMnJEUIIcfv2bdG3b18BQPTo0aNSejRib2a1vzez/D7//HNpfezbt2+h21zPnj1Fv379
+ChxemnW7LNtOnqdPn4o+ffqI6dOni8jISPHo0SNx6NAh0aJFC2n509LSauW2VJW9mTHMEMNMJQWa
+2hBmhBDi999/F82bN1cJNADExIkTxcOHD0sdZg4ePChCQ0NV/n799VexZcsW0a5duwLDTHJyssp7
+r1mzhhsFw0yNcfbsWSGTyVSCfGZmptS9OABx8+bNYudjampaaJgRQggTE5NCw8yiRYsK3XYeP34s
+GjRooHZClpqaKjIzM8Xu3buLPOFTKpVi7NixAkCB301KSoro3LmzACA6deokUlJSGGYYZsrswYMH
+UrAHIMLCwtTGuXLligAg/P39C5xHSdftsm47Qry8fUGfPn3EqFGjhFKpVBm2f/9+6X29vb1r5bZU
+lWGG1cyIWOWsSD179sS1a9fUuq3cs2cPOnfujG3btpWqHr2bmxtsbW1V/vr37w93d3fcu3evwGni
+4uJUnjds2JArHdUYGzduhIuLC9q1aye9pqenh5kzZ6pU4yyOXC4v0/C//voLK1euhKGhYYG9Or32
+2msYMGCA2usNGjSAnp4e7O3ti3zfoKAg7N+/H02bNsXUqVPVhjds2BA+Pj4AgFu3buE///kPVwoq
+s9atW2PcuHHS8++++05tnK1bt6Jp06Z45513CpxHSdftsm47ALBz505cvXoVc+bMUesEZ/jw4dKt
+DrZu3Yrc3FxuS+XAMENUSYHm6tWrteaztW3bFmfOnMG+ffvwxhtvSK+npqZi5syZRd4X5lU3b95E
+RkaG9Jeeno6kpCRcvXoVffv2LdE8imr0SaRJYmNjcfjwYZVG/3lmzpwpddO8a9cuJCQkVMoyrFu3
+DgqFAgMHDoSurm6B4zRq1KjQ6V+9h9Or8u6XY2VlVej8hw0bBmNjY7WTN6Ky+OSTT6THP//8M2Jj
+Y6XnycnJ+OmnnzBx4kSVe6OVZd0uz7bj5+cH4GX30Bs3blT58/PzQ7NmzQAACQkJuHHjBrclhhki
+zQs0RfX+VVM/29ixY3Hjxg0sXbpU5VfgPXv2YPLkySW6QqOnpwd9fX3pr169emjcuDF69+6NzZs3
+FzhN06ZNVZ6/eqWGSFNt2bIFb7zxhkpnGnlatWoFNzc3AC9v6Lp9+/YKf38hhNRIunPnzhU+f6VS
+iQsXLgAAmjdvXuh42tra6N+/P4CXXVJHR0dz5aAy69WrFxwcHKR1MP+VzZI0/K/sbSc5ORnXrl2D
+trY2njx5gpiYGLW/MWPGwNPTE56entDS0uK2VA5ybhJElRNoHj9+XKKeTmoaPT09LF68GEOGDMGI
+ESPw9OlTAMBPP/2EUaNGYcyYMWWed7du3dCqVSu115s0aQJjY2M8f/4cABATE8MVjTReRkYG/Pz8
+oFAoCr1LeHx8vPR4w4YNmDdvXrHVyUrjxYsX0jZa1NWXsoqPj5duXljcL8SdOnWSHj98+BA9evTg
+SkJl9umnn0on/35+fliyZAkaNWqErVu3wtbWFt26dau2befu3btSN8xr1qyRrsAW937clhhmiDQq
+0MyZM6dGh5nU1FQ0aNCg0BteWllZITg4GLa2ttKVEl9f33KFGZlMht9++63AYXZ2djh48CAAIDQ0
+lCsZDE9QJwAAGAdJREFUabyAgACkpqbCx8enyLuEr1ixAk+fPsWDBw9w6NChcm1Dr8p/FTMzM7PC
+P2P+Kp95J36FMTQ0lB6X5OSOqCjDhg1Dp06dcOvWLaSkpGD79u2wt7fH9evXK6Qb/vJsO3mhRAiB
++/fvl+gGz9yWGGaINDLQ1GTu7u6YNWsW3nrrrULH6dChA3x8fPDhhx8CAP74448KXYaHDx/CyMgI
+enp6GDt2rBRm7ty5g6ioKJibm3NFI40khMCGDRswZswYzJ07t8hx4+Pj8dVXXwF4eRPNigwz+W8W
++Pfff1f452zevDl0dHSQk5OD6OhoCCEK3fflv/Ff/rZ3RGWhpaWFTz75ROpIY926dYiMjETjxo0r
+ZBsqz7ZTv3596XFISEiJwgy3pXKsC9wciKiwoLJ8+fJix8t/o8yS3GW5pJKSkmBpaSldbndzc1M5
+IBTUgw2Rprh48SIiIiJKVG9/5syZUkPkS5cuITw8vMwB6lWtW7eW5n3hwoVS9TxYEnK5XLoBaFxc
+nNSQuSBPnjwB8LKtUMeOHbmSULlNnDhRal9y//597N69GxMmTECDBg3KPe/ybDumpqZSEPHz8yty
+2ryOdLgtMcwQUSWEmaCgoCLvsAy8bBeQx8bGpsQnWcVZtGgROnfuLB2UdHR0sGnTJmn4rl27cPr0
+6RLPLzExEa6urnj27Bm/XKp0q1evhpmZWbFdvwJAy5YtMXr0aOn52rVrCxwvrzpJenp6gdtYSkqK
+2ut6enpSY+G7d+8iKCioyG20oG21uO33gw8+kB4HBAQUOl5eSHN3d6/xV65JM9SrVw+zZs1Sea00
+Df+LWrfLs+00atRICibBwcHYs2dPgdPm5uZiypQpcHJy4rbEMENElRFm8nauRf1ClL9dUP7uMvNk
+ZmaqXBIv7sQor3rOhg0b1HqAGjp0KNasWSM9d3NzQ2BgYLGfJTQ0FJaWlujXrx9atGjBL5cq1ZUr
+VxAUFIQxY8aU+ETjvffeU9mmCqrWkndl8vLly7h9+7b0ukKhwIoVK6SQk79TAQCYN2+e9NjDwwMP
+Hz5UC/ohISEAXvbClJqaqjI8f7frBTVMnjRpEiwtLQEAmzdvRmJioto4t2/fRnBwMMzMzFSWh6i8
+Zs2aJdUK6NOnDywsLEo8bXHrdnm2HU9PT+nxtGnTsH79emRlZUmv3blzBy4uLsjOzpZ6NeS2xDBD
+RJUQZhISEmBnZ4effvpJpYGiUqnEjh07pBt4LV++vMBfoV8NGzt27EBYWBhiYmJw79493L17Fzdv
+3sTFixexadMm2NvbS20MBg4cqDa/Tz75BPv27UOzZs2QmpoKV1dXuLm54eTJkyq/WKempiIoKAjv
+vPMOXFxcsGzZMnz++ef8YqlSZWZmSr8Ul6ZXsvw31FQoFJg3b57KjwB5PywAQHZ2Nuzs7ODl5QVv
+b2+Ym5tDCCF1VRsWFob3338fx44dA/CyobSHhweAl1VxevXqhRUrViAwMBDbtm2Do6MjDAwMpBO6
+7t27q9zQM/+PGbdu3VJbdrlcjkOHDqFTp06Ij4/HhAkTpAbQefuQiRMnok2bNggMDKyQKkBEeVq0
+aIGJEycCAGbMmFGqaYtbt8uz7YwbN066uWdOTg48PT3RvHlz9OjRA6ampjAzM0NSUhL8/f2lHz24
+LZWRIKoBDAwMxN69e2vUMgcHBwsAIjExsUaWuVKpFAYGBmLJkiXCy8tLmJmZiRYtWoghQ4YIV1dX
+0bZtWwFAmJqaip9//lltej8/PzFgwAChra0tAJT6z8DAQOTm5ha6fHFxcWLJkiXScgAQMplMGBoa
+imbNmgkAok2bNmLRokUiLi6uVm4X5ubmwtfXt07tC9q2bauxn3n//v2ic+fO0vool8vFqFGjxPHj
+xwud5q+//hKTJ08W7dq1U9sGevfuLX755ReVbXLp0qVCLpdL4zRr1kxs27ZNCCGEs7OzaN++vfD2
+9hahoaEq249CoRDffPONaNq0qcp7mJiYiHPnzon33/9/7d1/dNV1/cDxF9vdxgZzTn4VET/q2DIC
+A9EgEaxOBxI9kOmRUA6dOqEQET+UMDrQOXKC6mQHS4qAlHM8mgdPHTMMzBN4GHFU1CUJyVkonFJ+
+jDMYsrGN7dMfftnXxa8pG9y7PR5/7W73fnbv+3Mv7LnPfX12e9KtW7dk2rRpyebNm5OGhoZk06ZN
+yYwZM5Lu3bs3e41NnDgxeeyxx055LEeOHElmz56dFBYWJr17906mTp2afOMb30j69euX3HXXXRnx
+Opw/f34ycuTIDvWamj9/fjJu3LiMfgw7duxICgsLk6qqqhZd//08tz/Ia+ek+vr6ZNGiRUlhYeEp
+/7/94Ac/SGpqak57/9rDa+mkV199NYmIZM+ePa2+7T/96U9JUVFR0ilp7WlAaAOXXnppLF++vNlb
+MdJdaWlpXHfddXH48OGm39xkmqeffjpuuOGGk7/4iF27dkVZWVkcOnQo8vPzY9CgQTF06NCznnb2
+AvxCJnbt2hX/+Mc/oqKiIhobG6Nnz54xcODAKCkpadfvJx48eHBMmzat6TeHHUG/fv1i/vz5Heox
+/6+DBw9GWVlZ5Ofnx7Bhw5r+yvnu3bujf//+Z3091tbWRllZWVRUVETPnj1jyJAhkUqlory8PPr1
+63fOv4jeErW1tfH3v/89Kioqori4OK688spmZ3dKZ/fee2+UlpbG5s2bO8zz6d57743t27e36C27
+6ezll1+OoUOHttn2z+e1U1NTE2VlZVFZWRk9evSIwYMHt+iEOZn8Wjpp+/btMXjw4NizZ0/07du3
+Vbe9bt26uP32252aGTizkyET8e6ppktKSpr9sa50kK73C9pKjx49Tpkni2jZKVrz8vKaBpPf6+Tb
+SltDXl5eXHPNNXYUF1Rbhsz5vnby8/ObnfnTa6l1mZkBAADEDAAAgJgBAAAQMwAAgJgBAAAQMwAA
+AGIGAAAQMwAAAGIGAABAzAAAAIgZAABAzAAAAIgZAAAAMQMAAIgZAAAAMQMAACBmAAAAMQMAACBm
+AAAAxAwAAICYAQAAxAwAAICYAQAAEDMAAICYAQAAEDMAAABiBgAAEDMAAABiBgAAQMwAAACIGQAA
+QMwAAACIGQAAADEDAACIGQAAgDSTsgTQttauXRtFRUUWgla3ffv2DveYKyoqYu3atdG9e/cO85gb
+Ghri+PHj0aVLF096/163iXXr1sXatWs9AVqguro68vPzo1OnThYjTf6fEjPQVi+u1Lsvr9mzZ0dO
+To4FoU3k5eV1qMdbVFQUGzdujLKysg7zmOvq6qK6ujry8vKic+fOfohqQ5WVlTF69OgO9Zjz8/Mj
+IuLOO+/0BDiH2traqKmpiYKCgsjNzbUgLXDkyJGIiMjKars3g4kZaCPDhw+PJEksBLSit956q8M9
+5rq6uli1alUsXbo0qqqqYubMmTFr1qwoLi72hOC8LVy4MBYuXGghzmL9+vUxd+7c2Lt3b9x3330x
+Z86cpgjk4jMzAwBpLDc3N6ZPnx7l5eXxox/9KB566KEYMGBALFq0KCorKy0QtJHy8vIYP358jBs3
+LoYPHx67du2KBQsWCBkxAwCIGkhPhw8fjrvvvjsGDhwYVVVVsW3btli9enV8+MMftjhiBgAQNZB+
+Tpw4EcuXL4/LL7881q5dG2vWrImNGzfGkCFDLI6YAQBEDaSn9evXx5VXXhnf+973YtasWfHPf/4z
+Jk6caGHEDAAgaiA9mYsRMwCAqIGMYi5GzAAAogYyirkYMQMAiBrIOOZixAwAIGogo5iLETMAQDuN
+moULF4oa2iVzMWIGAGjnUfPwww+LGtoVczFiBgAQNZBxzMWIGQBA1IgaMkp5eXlMmDDBXIyYAQBE
+jaghM7x3LubIkSPmYsQMACBqRA3pzVwMYgYAEDVkHHMxiBkAQNSQUczFIGYAAFFDRjEXg5gBAFo9
+apYsWSJqaDPmYhAzAECbRc20adNEDW3CXAwt1SlJksQykPZP1E6dYvDgwTFp0iSLAZCGGhoa4sUX
+X4yNGzdGbW1tXHvttTFy5EjzDLwvhw4dinXr1sXOnTvjqquuijFjxkRhYaGF4RTr1q2LzZs3ixky
+wzXXXBNVVVXRtWtXiwGQxpIkiYqKiti3b180NDREz549o1evXpGdnW1xOGsMv/3223HgwIHo2rVr
+9OnTJwoKCiwMZ1RdXR1du3YVMwBA66urq4vVq1fHkiVLoqqqKmbOnBmzZ8+O4uJii0OTEydOxG9+
+85tYtGhRFBQUxI9//GNvJ+N9ETMAgKjhglu/fn3MnTs39u7dG/Pnz485c+Z4WyJiBgAQNaSv8vLy
+uPvuu+Opp56Kr3/967F48WKnWeYDczYzAKDNOfsZ/l4MbcGRGQDggnOkpuMwF4OYAQBEDRnHXAxi
+BgAQNWQUczFcKGZmAICLzkxN+2AuhgvNkRkAIO04UpNZzMUgZgAARE3GMReDmAEAEDUZxVwM6cDM
+DACQ9szUpA9zMaQTR2YAgIzjSM2FZy4GMQMAIGoyjrkYxAwAgKjJKOZiSHdmZgCAjGempnWZiyFT
+ODIDALQ7jtR8MP87F7N06dL42te+ZmEQMwAAoiZ9mYtBzAAAiJqMYi6GTGZmBgBo98zUnMpcDO2B
+IzMAQIfTHo/UvPnmm/Hmm2/G9ddff9brmYtBzAAAdPCoOXbsWDz77LMxfvz4i/44du3aFSUlJU2P
+KScn57TXMxdDe+NtZgBAh3U+bz/75S9/GRMmTIilS5de1Mewc+fOuPbaayM7OzuysrLigQceOOU6
+5eXlMWHChBg3blwMHz48du3aFQsWLBAyZDxHZgAA/k9Lj9QcO3YsPvrRj0ZlZWVkZ2fHlClTYsWK
+FZFKpS7o/S0rK4svfOELcfTo0Thx4kRERHTp0iXeeOON6NGjRxw+fDgWL14cv/jFL+Jzn/tc3H//
+/TFkyBA7GjEDANBRo+anP/1pLFiwIOrr6yMiIicnJ0aOHBl/+MMfoqio6ILcx5deeik+//nPR3V1
+dTQ0NDR9Pjc3NyZNmhRXX321uRjEDACAqPn/qLnzzjtj0KBBp7wNLTc3NwYMGBDPPPNM9O3bt03v
+15YtW2LMmDFx/PjxZiHzXgUFBfH973/fXAxiBgBA1LwbNQcPHoz6+vrTRkROTk5ccsklsWHDhrjq
+qqva5L5s2rQpvvzlL0ddXV00Njae9jpZWVkxZMiQ2LZtm52HmAEAIKKysjL69OkT1dXVZ7xOdnZ2
+pFKpePzxx1v9TGcbNmyI8ePHR319/RlD5r1B87vf/S5uvfVWO452y9nMAABaaNWqVU1zMmfS0NAQ
+dXV1cfPNN8eyZcta7Xs/9dRTceONN571iMx7JUkS3/3ud+P48eN2HGIGAKAjO3bsWCxZsuScMXMy
+JBobG2POnDnx7W9/+4xzLS31xBNPxM033xwnTpyIlr6pJkmSePvtty/6qaNBzAAAXGTLli2Lo0eP
+vq/bNDY2xsqVK+Omm26Kd9555wN930ceeSRuu+229xVEeXl50alTp4iIeO2118JUAe2VmRkAgHOo
+qamJgoKCiHj3rGV1dXXv6/a5ubnxiU98IjZs2BC9e/du8e1Wr14dU6dObdF8TCqVirq6uhgwYEBM
+mDAhxo4dG6NGjYrOnTvbgYgZAICObN++fbF169bYunVrPPfcc1FWVhZ1dXWRl5fXooH8nJycKC4u
+jmeffTYGDRp0zu/34IMPxne+850zHlXJy8uLurq6yM3NjS9+8Ytx0003xdixY6N///52FmIGAIAz
+q6+vj5dffjmef/75+Nvf/habNm2K/fv3RyqViuzs7KitrT3lNllZWZGXlxe///3vY+zYsWfc9s9+
+9rOYN29es0By9AXEDABAm/nPf/4TL7zwQmzZsiU2bdoUr776atTX10fnzp2jtra22VGWX/3qV3HX
+XXedso377rsvFi5cGBHvnua5sbHR0RcQMwAAF1ZdXV288sorsXXr1ti8eXOUlpbGgQMHmr7+pS99
+KdavXx9ZWe+ek2natGnx61//OiIi+vfvH1/5ylccfQExAwBcKPv27Ys//vGPFuIMDh8+HP/617/i
+6aefjoaGhujbt2/ccccdsX79+vj3v/8dH/rQh2L06NHRrVs3i3UWI0eOjE996lMWQsyIGQCg9ZSW
+lsZ1110XvXr1ii5duliQczj5N2mysrKaTqfM2e3evTuWL18e06ZNsxgdXMoSAABt4fXXX4+ioiIL
+QasbPHiwRSAi/NFMAABAzAAAAIgZAAAAMQMAAIgZAAAAMQMAACBmAAAAMQMAACBmAAAAxAwAAICY
+AQAAxAwAAICYAQAAEDMAAICYAQAAEDMAAABiBgAAEDMAAABiBgAAQMwAAACIGQAAQMwAAACIGQAA
+ADEDAACIGQAAADEDAAAgZgAAADEDAAAgZgAAAMQMAACAmAEAANqBlCUAADh/VVVVsXfv3vP7wSyV
+ik9+8pOxf//+OHjw4BmvV1xcHB/5yEdO+XySJPHaa6+d9jYDBgyILl262FGIGQAAmvvLX/4St9xy
+y3lto2fPnrF///7YvXt3rFy5Mh5++OFIkqTp6yUlJTFx4sQYNWrUGWPmz3/+c2zZsiWefPLJiIgo
+KiqK6dOnx4wZM8QMYgYAgFPV1NRERETv3r1jwYIF8dnPfjYuu+yySKVSUVpaGpMmTYqIiI997GPx
+3HPPRZIkcfz48XjrrbfiySefjGXLljVtY8SIETFixIi44oorYt68eU3f44c//GFMnDjxjPchKysr
+7rnnnrjnnnti4MCBsWPHjnj88cdjzJgxdhBiBgCA06uuro6cnJz461//GiUlJc2+1qNHj6aPc3Jy
+ok+fPk2XL7/88hg9enRceumlsXjx4ma3mz17djz00EOxc+fOiIgoLS09a8yclCRJVFRUxMiRI4UM
+7ZoTAAAAtIKampoYP378KSHTUjNmzIjGxsZoaGho+lwqlYqFCxc2XX7kkUfi2LFj59zWCy+8EAcO
+HIgZM2bYMYgZAADOHTPjxo37wLe/7LLLYtiwYXH8+PFmn7/llluiX79+ERFx5MiR+O1vf3vOba1e
+vTq6d+8eEyZMsGMQMwAAnN28efNiypQp57WNLVu2REFBQbPPpVKpmDVrVtPln//8582O3vyvo0eP
+xqOPPhpTpkyJvLw8OwYxAwDAOX6oysqKTp06ndc2srOzT7uNb37zm1FUVBQREW+88UbTmcpO59FH
+H41jx47Ft771LTsFMQMAwMVVWFgYU6dObbp8//33n/Z6SZLEihUrYtSoUR94dgfEDAAArWrmzJmR
+Sr17ItotW7bE888/f8p1XnrppXjllVeahQ+IGQAALqo+ffrEbbfd1nT5dEdnVqxYEcXFxfHVr37V
+giFmAABIH3PmzGn6+Iknnog9e/Y0Xa6qqorHHnssJk+eHJ07d7ZYiBkAANLH0KFD4/rrr4+IiMbG
+xnjggQeavmbwHzEDAEBamzt3btPHK1eujKqqqqbB/xEjRsSnP/1pi4SYAQAg/dxwww1NZyo7evRo
+rFq1KrZt2xZlZWUG/xEzAACk8Q9vWVnNZmeWLVsWDz74YFxyySVx6623WiDEDAAA6Wvy5MnRvXv3
+iIjYu3dvrFmzJu64447o0qWLxUHMAADQehobG1t1e/n5+TF9+vRmnzP4j5gBAKDVvfPOO00f19TU
+tMo2p0+fHnl5eRERMWzYsPjMZz5joREzAAC0rmeeeabp471798aOHTvOe5u9evWKyZMnR0QY/EfM
+AADQeg4dOhRTpkyJIUOGxIoVK5p97eqrr44bb7wxfvKTn5zX95gzZ04UFhbGxIkTLTgdUsoSAAC0
+vm7dusWaNWva9HtcccUVsWnTpigsLLTgdEiOzAAAZLChQ4daBMQMAACAmAEAABAzAAAAYgYAABAz
+AAAAYgYAAEDMAAAAYgYAAEDMAAAAiBkAAEDMAAAAiBkAAAAxAwAAIGYAAAAxAwAAIGYAAADEDAAA
+IGYAAADEDAAAgJgBAADEjCUAAADEDAAAgJgBAAAQMwAAgJgBAAAQMwAAAGIGAAAQMwAAAGIGAABA
+zAAAAIgZAABAzAAAAIgZAAAAMQMAAIgZAACA9JCyBABAW+jVq1cUFBRYCFpdZWWlRSAiIjolSZJY
+BgCgtVRUVMTGjRstBG1q6NCh8fGPf9xCiBkxAwAAZB4zMwAAQEZKvb79xaYLJYOutiIAAEBGcGQG
+AADISP8FpxZnWS0U37cAAAAASUVORK5CYII=
diff --git a/Documentation/DocBook/media/fieldseq_bt.gif.b64 b/Documentation/DocBook/media/fieldseq_bt.gif.b64
new file mode 100644
index 00000000000..b5b557b8815
--- /dev/null
+++ b/Documentation/DocBook/media/fieldseq_bt.gif.b64
@@ -0,0 +1,447 @@
+R0lGODlhcwKfAucAAAAAAElJDK+vr0gSElYMDC8kDV5bEBcHOwYGSEQODmEaGgoKOBkTVC0tVyAg
+aDcJC6Ojoys8DAAYGqSkxV9fFFtdEJmZmUA4EF0wMAAAcAoTHTZHJ0gYGAcMTwcSO29ISFUHB2AV
+FXd3YAcHMRUVQiIAGg4HT3t7eywOJ3d3dwcHSEEgABMuDnd3OGpkSQAAYlZGBzEEBGJlDCstCxwc
+WQcHSzkRGWBtYC0AACA3ABAKNhAQTTMwDA0VQD4AAEYVFVVVVSQMJQULOB8fQScnYBgYRD5VPmZm
+DEZRB2ZiDAoKSgAAVAwQOH5+lBwcS+7u7hoaST4+X3d3WACPADMzMyBRIDgAAGBgc0JCEHEAAEwN
+DRkwDAoKOR8kPZR7eyA1IABpABgNQBA9EABVAAsLRww/DAwMPgBNAENDCgc9B8zMzAUFQQBDAD4M
+DAwOKgAAcQA5AEtLFYqKAA0NTC8HBxEREQgfCAArAAApACIqMkkGBhoqKnwAAAsGQ6qqqkoKCg4O
+MlkcHAoZJCcrW6SkpFQAAAAAOBAOSwAVGh0ROgMPHWZmB00QEGUAAFQaGjEyC2w4OLe3n4qKioiI
+iBAVMC4uXhkZUGIAAHJYWHd3AAAAPhAQUQUGL0BAIGggIBgAGkIVFV9fEAwcJR8KJA8MU9EAAAcH
+VRoaYWhoaDcAALu7AGZmZnAAAGRkZGQVFVhqWD4KCgwOUzMzDAAAmgklBzEHBzExClhYWBMTPAYJ
+Qy8fCFpaB///////ACISRExUDUQrDAwMVhISSEYYGHd3IDhcOERERElJAAkPNTsHF1hYckgGBj05
+CFYAADg4OCAVO0hCDDAwMLu7ilpaDR8qCDg+EBxGHN3d3REGNjo9CDQ8DBwYRGZmHFMAABQ+FBE+
+ESIiIhs+BxU0FWVeBw04DYqKsxAsEB8hQAwuDAc2BwwqDAoqCgcIL1dMDQAA0Q0iDQwiDAckBxAQ
+EDwAAAAAU0JCDAkJPru7u5oAADg4bAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAALwALAAAAABzAp8C
+AAj+AHkJHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq3Mixo8ePIEOKHEmypMmTKFOqXMmypcuX
+MGPKnEmzps2bOHPq3Mkz5z0AQIMCSNHyZ0WjE5GqNAZAqcGmT+8VZMoL6k6rEp0KfEJl489VBcEB
+GGjBwk8LBJsyFQqU15MUdQDUWfVk4JNVccER5ZXCT8+/gAN/xFp0LEWtDxEfRKo44s8n1/YeJCyQ
+8GO+1xhSbvwxRWaklBEiXoVW4886BNW0FQjkyem6laUKdLqKSuZrQIxtpbLqc51JbsHBFkw8pYUT
+w4uHDK2SM0PnCqHPNiz9uWGFoS1fb7h5u0nQshf+ar2G2isAKn4FpqByHQivn8YkY3WK9RoANXx1
+kwUncBVw5QCSdAsA8jiDXIAeEQYXAMbgp0YKKQAFYVxEPbjgXm/FBURmD1pQxz1qsDfUdAVlCMCG
+vFg4lhpMgbOKYX6IBY5fHX642FBx0cULbnKlUFdQkgS1IxA91mWMBWJRYQF7dZQ2HVBIsdhjbG4R
+WUeE4f3UFlQN6hUiUK1puV1Q93Sp24LglNYlAGmmKGJrvBxJ4YWxiUkmLzGymZ6ULnqXAlgC5Tmj
+QRE2qd+NkwDKCziTwAjcT6rhV1WW28013D11UfHfVrItieCnHw0YVIEHgnoRVutllgJ/X+F54hP+
+fjT1FWR68WXbXV3dU4cxmBoDnGpSaZUqru/NJRUVrV3DXrHBAnCNrrwmN9Cs17jIC2+QUUEUY4Zh
+qyxR52X2IlFwFWSUUU/8tmObXBrzxBNEhveeYVCd5wd5RD1Ra3eVzajGPeCoSq8x4qJ2ZXDghvlq
+rFJBBR6z82aGbLbe+TqbjT9lNtCq4npHUMblqQEOUr3Nmx+VJJIVl7aSToqQan/ZydbMNNds8804
+56zzzjzXbGpFWA0q0IdKWSWrswIhyUuTAtn3L9IE2ddsQUzveF/GKUJtwVirSAZECliLpnUdqmns
+ockml500agCkx625YxnlqUCT6NaU2lbL+zD+AKXNpTHK09Lr5MaCk+h3WrIZ3fDULnc90Nd4b12Q
+VY6zJtmiTnoc+LV+QYiUfuiyS6lB96wHAKDMAa5TZBC27vrrsMcu++y012777bjDHg3N4Dgj7c8P
+YTXzPUUnTvx1Rgl/PFlUgBMv2gMp/zaJawUFtuabT6fUudTFjfxYVk2/uVERCmX38tHrTe/iTa8C
+Th1A4MevyykCsStV9Bt1jfvwy288lQ5bX5zYcr3spU8g1ZMQ4gbCH7HxIlGLetp7/sOYOjxhPthz
+FX40VRDPqA54IISIqAhkoN+F0CFBkxf0FBe2s1XNaVG6D5W08sKrGcY+ZuPa5aB3I7OBI3L+qHkb
+EPPXPbiZzAKHSh8Om6YdAKowQ/TLnlUOhrbwbQeKinNiFaVSuYEskReSI4iNeNFFg1StKgnRH9lY
+NZYUSEopX8NgWpIDlVURJFawSd0J92iQW5DKhHzkTnhS9UALFq9Op6MVuW5VG7RF6oFt46GtrkEs
+pRgjWcvSVbCIhrwdUqtW3tLWvOqClFCCSzbiIxG61PUtlxnDXfBqosusAgQ42TGSHwPAj2TDSqbs
+kkS1rMst/zdLxjkMYza6JMWmshdNQqx0fAkYGanjyW6J0iiHUkq65DiQV2aGWMFB0T1EmbVAmjMh
+lDwnRRS0MvwcclI/WZCOTAQnpSwoPgD+mIRW6EnK6zyBKYZKmozQYk/vqIiKPEKoWNRAHtQkdC9W
+TNn4DPMlKkIllldyYy61mKK1UAE/AI3aQq2CJDbBhW2oXJFH/YeyekmlodeSYUnb5BaAIrEgk3CP
+QNlUmgi55UVNMoxPNwpJd95HMk5p1Ojsghe5lGwrTa1V0nSqzqpadSXVmckOr7rHdAEyNbDRVU+A
+MDiumvWsHclqTO6xKbSeMAVlPcgqWgMvReWkWm7Nq14tota9+vUjb2FILF/FE7P89bCITaxiF8vY
+xjr2sZCNrGQnS9nKWvaymM2sZjfL2c569rOgDa1oR1uSfxHvtKhNrWpXy9rWuva1sI3+7WkBaVrZ
+2va2uM0tbNOo29769re7FQ1wh0vc3/K2uMhNbnAN4hrlOve5p21ZQvIxi+pa97rYza52t8vd7nr3
+u+CtbgZUOBBP4OO86E2vetfL3va6973wja98z1uIhHBDFfjNr373y9/++ve/AA6wgAeMX24kxBpg
+SLCCF8zgBjv4wRCOsIQnTOEEWyMhSwivhjfM4Q6DlwaiYcV8R0ziEptYvp5gSD7cweIWu/jFMI6x
+jGdM4xrb+MYsngV5BeKJUvj4x0AOspCHTOQiG/nISE6yjy+REGL04slQjrKUp0zlKlv5yljOspaf
+TIyEVGEKYA6zmMdM5jKb+cxoTrP+mtcM5iok5AU4jrOc50znGztANPhQsp73zOc+JznFC1lxnQdN
+6ELTWMcI6bGfF83oRhuZyQhx8pYnTelKWzrLXUbIl9nM6U57+tNqdjNC4GzoUpt60HdeTJ4dzepW
+LxrQChH0qWdN60PvmBeKdrWud/3oJl/618AONpYzfZBNg/rYyE72mUV9EFLX+tnQdkeqSbdqXlv7
+2qWAdULOYYZue/vb4A63uMdN7nKb+9zo7jYXIIAQDhDg3fCOt7znTe962/ve+M63vt9di4TI4ggA
+D7jAB07wghv84AhPuMIXDnBZJOQd6Ii4xCdO8Ypb/OIYz7jGN87xiL8jIexIt8j+R07ykqPbDQiB
+wB/2zfKWu/zl+uaAiqNNc1oj+iC5xrbOWw3pg0ha2EAP+qWJbRBjK/voSP80sw3i7Jo7ndDTNle1
+d051RmsbIbJ+utbnfHOD5LzqYN9zzw3yc6Gb/exWJnpBjJ70trvdzEsvSNO3TncbR/1jUw+73pF8
+9YNkve6Al3HXC/L1vRt+yGMvSNnRznjGq50gbH+75N8ed4LMPfCYb/Hdp5X3w3v+x303yN8zn/nB
+E6Twn/d84gmy+Ma7PuiPH0jkJ0/7o1d+IJcnfeA3P5vOp/7woS/IEOZA/OIb//jIT77yl8/85jv/
++cUnBEJ+oIXqW//62M++9rf+z/3ue//74K8+LBKChWmY//zoT7/618/+9rv//fCPv/mxkBBzkOP+
++M+//vfP//77//8AGIACeH/mkBD2AH0ImIAKuIDPxwQIQQjhF4ESOIEUGH4/MHO6p3umV16/14Gr
+NxCt93oi+GuxJxCzV3soCGq3JxC5l4F0x3vv4XsdqHfBRxCj54J0t4E8NoOp94ECEYIjGISTVoK8
+cIIpeIRstoK80II4+HQweA8yyINVV4MDcYNN+HQ6iGtSqHq+JoReWGlEaIRIOIbL9mZXuHt4toXA
+h4FnmIO3hnpquHM+yAtA+IV2OGVhSIZ6mIRm2IYvmIZxSIMMAQUvUIiGeIj+iJiIiriIjNiIjviI
+kFiIS8BuB5EA83CJmJiJmriJnNiJnviJoBiKoniJOJAQ2ZAJqJiKqriKrNiKrviKsBiLsjiLqJgN
+CREPbJCLuriLvNiLvviLwBiMwjiMxJiL8ZAQhhCJyriMzNiMkDgCKZcKoziN1FiN1iiKCcCGfoiF
+bxiIejeHdXiH4tgLebiH5liGo7aNW/eEUeiNvEaFAmGF6lhrWQiH7shr4DiO+oiHXnaO/khmSsiE
+8zhr7HiPU6iNAwlt9WiQVJeP+/iQ5NiP/ziRUxCQCVlzBcmQOgePvEAEHvaRIBmS3pUBAoAQrsAH
+KJmSKrmSLNmSLvmSMBn+kzI5kyjZDAkRCgSWkzq5kzw5YKGQEGJQYUI5lERZlBQmBhgmkkq5lCC5
+CQghAI1Ak1I5lVRZlTPpCgzRAG+wlVzZlV75lWAZlmI5lmRZlma5lfRQkgehACfWlm75lvBVXwgR
+B3JQl3Z5l3iZl3q5l3zZl375l4BZl3GQEOJwBoZ5mIiZmIq5mIzZmI75mJAZmYYpDgmhCWd5mZiZ
+mZppliTwlCIGl6AZmm2pAAh5kTbXjRqJbQ4JkfpYjhTpjxZpmtCWkalpbRwpj7JZaAtZm9a2mqwp
+jq75muYYm7lJa7TJm7p2m8VJj6iJnLrmm79ph8EpnHpInMtpasfpnKz+xpFOUAPe+Z3gGZ7iOZ7k
+WZ7meZ7omZ7eqQKUaBADAALwGZ/yOZ/0WZ/2eZ/4mZ/6uZ/wGQMJgQa7EKACOqAEWqAGeqAImqAK
+uqAMGqBokBDrkA4SOqEUWqEWeqEYmqEauqEc2qESug4JsQbqOaIkWqImmp4LkHJ6wJ8s2qIu+qL7
+OQCleZ2EtpvayXNdGJ13OJ3UOYbWSaOFlp03anUzCqR0ZqND2mjQqaNCyKM9eoQ/aqR1JqRJ2mfK
+KaW62ZxVumhLyqQj6KRPioJRiqVyRqVbqmdXSqZ1hqRnymdd6qWvB6ZhSntjqqZ2BohtaqUM0Z0n
+2qd++qfmyZ4I8Z7+MFqohnqo+OmfCAGgDdqojvqokLqgD4oQEeqhlnqpmJqpHAqiCCGigPqpoNqn
+KXoQELCiiHqqqFqoMhpodrqmWpqnevamcNp4cjqnklenrUpjZgqrRpamuYpjbMqrSCars4p2tWqr
+boervxpjuyqsQ+ary1pjweqsRUasxWp2x4qsSaes0epizUqtQMaRWrmZ5Fqu5jqWaYkQbCma7Nqu
+cZkQdBmY8jqv9FqvfzmYCFGYkrmv/Nqv/gqZlIkQlnmuBFuw5NqZByEAn+muDNuw+ECaC+GRTDmx
+FDuSamkQJ2mVGruxHAuTNokQONmTIjuyJAtgP4kQQWmUKruyLBv+YUiJEBlWsTI7s9XllAkblR2b
+szqrsVjJqt1qY9MKrkJmrdcKexKprWLahz+rq3gqtEUGrUsLY0HrtD9GtEUrbNmKtMrGrUv7rU4L
+tVHrYlNLtaVgtVcLbFmrtcjGtT/rtULLkVHgAHI7t3Rbt3Z7t3ibt3q7t3zbt3JLA7eGAZ4wuIRb
+uIZ7uIibuIq7uIzbuI47uKCQEJ1ADJRbuZZ7uZibuZq7uZzbuZ77uZTbCQnxBVVQuqZ7uqibuqq7
+uqzbuq77urBbul+QELjgt7Z7u7ibu317DqIRCI/7u8AbvMLruBhAWsZ7vMibvMq7vMzbvM77vNAb
+vdI7vdRbvdb+e73Ym73au73c273e+73gG77iO77kW77me77om77qy1VnBEblsRXNlEGawRa6ARr0
+K0nzEhRCcxDlwxZScRdxYSnRIxRwsr4GfMAPkQJUxQtAYFdDhRhqQCSEhRCh8TBGdMHumx5ptB3k
+gSK4UQcaYxXKssAIXMImPBCqARsXpMF+EBcSxUB0wRVJNDnkZcFEdcPRJB7bcUkFUUuAEysnHMRB
+TFMt7EVpUkRTEVYZVMEChMEGZDV/cyN2IUOpoUtRBMRCnMUHrMD9IRm+kkqE0kCTUcNNjMMvHEVS
+fMYcNcJa3Mbqm8JLIylcDMZ2ARe3VhVskTIzsy0eoxV6BD3+ilEv5vNVblzI3qskMXIx/aTGhUQw
+2EHGH4S/TvFFDrQVVIzCVvzHhrzJ3ptTldO/ZIIYq3LHB3TBTEw622FH0bHDJOzDaMzJsAy+9vFD
+qHzGFyRdCXHKryzJ1+EhGlzJTQM/t2E/IUzKsXzM19s8aSwzvDIzuQzJeJzHzJy/QLG/G1wiTXU4
+kYzM3NzN3vzN4BzO4jzOZpUCr3TOr4TLH4FE6PxKcUXO8BzP8jzP9FzP9nzP+JzP+rzP/NzP/vzP
+AP1YuTPQBF3QBn3QUexXrHPQDN3QDk3QCb1XpfPQFF3RFg0hjtUzGr3RHN3RPGPMZiUzHj3SJF3S
+NwPSXAX+yia90ixN0hm9VXr1Eyh9VTKdWDWNWEOF0/K7VyOCWDd9WD/9V0HtVzl9WEWtWD0N1Joc
+0kvNVUO9V0dN1DutV0ntBZhw1Vid1Vq91Vzd1V791WAd1mKN1YEz01b10zfwCmq91mzd1m791nAd
+13I913Rd12p9A2WdWDl9DWPd137914A91l5AOC/NgWRLZD331DGNFWKotlub1zrNeYdNZLAW1YiV
+1PZItond1DTN2I5Np5Bt1MjTjlRb2VOdV5g92YgX2kLt2Z99q6wt1ZKt2kFm2oW9g7QNZJtt1lX1
+04392ioY21A92rkdroTdWEnNCKm63Mytn8sg3IsdHur+oKnUXd3WvaHqAN15ldOE0Nze/d3yyQjH
+zVipXdxLpt1u5dvATXnojVY5DYXm7WO2jdySkdlUu9s27drrva3tfVbvTdpfO96LVd7mjd8+rd/7
+bXv9Xc7EHd/zTd71Hd9lu+BOjeAJnmzMptjb3eDm/eADLhmECt4inqqKOi+8rU4/XanXveIsrqmc
+auJ6fR2lOuI0fqqryhen7VYEXtwGrtTh8dsXvmYZztlW9d8S7uFIHeHx3eOt/eNBruDaE+Oz3eEC
+nuSGXeAU3tlO/uQYnuVFzuHFjeSJldTr6rBmLppyCeMHHh76+q9u/uZw3pgBq+aiPRAKe+Z4DpoQ
+i+P+t80LjpAFgB7ogj7ohF7ohn7oiJ7oir7ogO4DXt7bWOENLTvplL6y3vDo6pTTAtANjN7pnv7p
+oL7ojlDlY67kWB7lay57XN7lqF7nvXfkpH7Zps7jmH5O6r3qxzbkJ35ORu7gsX5YO57bTO5Xt47r
+Slfr5tTrVK4eOY5WST0MbRDt0j7t1F7t1n7t2J7t2r7t3B7tdIDsgfTT8FAG5F7u5n7u6J7u6r7u
+7N7u7v7u5A4P4M5HOQ0BD9Dt+J7v+r7v3D4Mv/5XwU7bwy7RFm7sfNjqf6XsYf7vfhXwqj3w0a3q
+Bu9pui7lr+7rzN7n9u20EJ9XxT7xB0/nCQ/muS3+5rJ+5bSO8MRe8CCPZhUf2Re/7HxO3wNBfRV4
+8zif8903fipP8OFhfwMY9EI/9EQfgAXY83rF3Tq/9Eyf8xeY8TSP26cu8iu/5S0v5PO+Rwpf8gzP
+07Mu7Fl/Qh9/9S4f9iG09bRt8sD+9QJv9iA09mQPd24PPGiv2moP8Gz/8HP/M3Af9wC596ZS95N9
+9w0vGe4Gc4if+Ip/b/2G9B6PFRDXcZI/+ZRf+Rv3cY7vVvW+covf+Z6P+DIH9RCO8mCf+WjV934v
+Zi/v6jEI66L/4aTf9qZ/Vqif+m0G+KAi+IdN+F4f+3o/+0xt9bb/98Cf0iSf9l1P1ZIRAnne/G3+
+meYant5Y8Q1jUP3Wf/3Yn/3av/3c3/3e//3gX/3fgPufoukL6/zoL18hkPyoLRl/HurwH//yj+iO
+XvxaPhCSXun6v/8Sdun2/+UAwUuggG5ZDB5EmFDhQoYNHT6EGNGgI4G8UgComFHjRo4dPX4EGVLk
+yIwAUlT0VErlSpYtXb6EGVPmTJo1VV6qeA/APZI9ff4E2lMnT4FVphxFmlTpUqZNnT6FGlXq0So5
+dwbFmlUryYs58dkEG1bs2JqeKnbdmlbt2oomUZKFG1fuTJwCh7LFm3fk3aJT/f4FHFhqVbtX9R5G
+nBEtr3tf5z6GDNeswMWJLSd2KzBlZM6d6Vr+JXpZtFq+vIwKRp1a9VPCjA2Php11cWPPtW2vnGwR
+Y2zeWzPzwuBJ+HDixY0fR55c+XLmzYWDAt1butDXX6pcx55d+3bu3b1/Bx9e/PUv0aefBzk7kHP2
+7d2/b47h7G709UH+tp/fdWj99kv3r+8/AM+rbEAC6TMwP/wS7E1ABmNz8MHRIpTwsgIrHO1CDGNb
+cEPLKPRQLxBDxGtEEtfS8MS8UlTxMABWuSdGGWeksUYbb8QxRx135DHHSV5rUUQAJumxSCOPRDLJ
+GH/kL0i8LlIySimnNHIVBJ1EDAAtt+SySy+/BDNMMccks0wzm8SSNDPXZLNNN9/0Es00t7r+CE47
+78TTzTkTo7JPP/+U8Yk92XoCUEMPRVLQQdW6BlFHH8VxUUknpbRSSy/FNFNNN+W0U08/BTVUUUcl
+tVRTT0U1VVVXZbVVV1+FNVZZZ6W1VltvxTVXXXfltdfD6rAgIwvqyOiJk1zDyktjkOVFWWYz0mlL
+cPz4qEsqQrtmlToAACcFQaPt8pYvj7WACi2pCFYgbjWyUk5f34V31xSAyAiIVRTbTaeN1ABCSyAU
+5QjIwtRFU1+NDOZlWGo7MuwJbQW9po5VruFFDSqo0EjgZvlbhYqF/aDi3mYBUCOjbd2NN2WVY1UD
+AEWfAGBhXvzYdmCNwFnliSeoWJbhgnf+0xhhqxQDx6PXYObJGHoreqLbktB8zQJwAOblCWCbpeLY
+mc1FeWWvv0YVnHRprugasfO9khdjFBU6458J3qjtZ3m5BgCKAw7Nap1J1mgSjNuCOjQqJtkoBYyH
+LFqgVZgEu3HHUZ1Xca2NIRLtj1JIHO+4gX774Cs1hrvqVaiVW2iNXwsao53AKZmXOuru+nHZZ6+0
+ZUHraD1yg+UWyNg6UPbSZi9PKv1zd50t/umNUH97pxROAnlj2qen/lJ0/Uj8njq+tXyjSeow5m6f
+Nw8d2rSFrlt8tyv6UQ2YW2f/7/IBr2hw7w+/R42iF5e+ev//T9Mk7HWsOnEpRmnDXOz++me++dmM
+gWfJ3PL4cxWlFctp9FufQIZFNasF6yqse90CAThCEmKobqwj39yqxreQpK6BKnyWwowWmu8JJGIT
+q9jFMqi8inTsYyGDm+H+BroSFtGI9qFCBIfmGi4ZA1xbmmEKv8TELS3ridOqFpeoAL9sbatbVBNh
+A8t1LsLBrWVlJOIR1bhGNrbRjW+EYxzlOMdQpcAYd8SjMeCHGAvkEY/pomMgBTlIQhbSkIdEZCIV
+uUhGNtKRj4RkJCU5SUpW0pKXxGR98rRJTnZyS1pD1RM9OUpSnmlVoixlKlXJJVgBwBjPg2UsZTlL
+WtbSlrfEZS51mcsOlUonq9hlMIX+OUxiFvN57Trli4y5TGY2M5jGSJuqelmqaY7KRKC65qey6SkW
+naqao/pmqLbZqXFyqpyb6qapwhmqdWozjaI6p6bimal0UlNryshHPvW5T37205//BGhABTpQguoT
+fu30VGlc0AKGNtShD4VoRCU6UYpW1KIXZagLzJOq0lSioB8FaUhFStAozKeVWsuHO1S6Upa21KUv
+hWlMZTpTmtZUpbMIDULJ+Rpi9MKnPwVqUIU6VKIW1ahHRWpSfUqMjYbyNS+waVSlOlWq1tQBJn3V
+b1JaVa521asyxWlbQHmq0vRUqWdFa1rVilSmFkaB7gwNVL86V7py9aqUiWaqtFr+V772laZhVddY
+TVXWtRbWsIc9alv3k8y4+tWxj13pXXVz0opsFbKXrStgmyVYX/IUsZ8FrWEVO09MlUaumEWtVyVb
+T1L9BgovgG1sZTtb2tbWtrfFbW51u1vYLgECYmVsRWxxDOIW17jHRW5ylbtc5jbXuc8lri2aStbX
+GIK318VudrW72xFg1VV7TW14q6pZnZrTs6FFb3oTO93BPlW875XqavOKKvDC175gzSlnSUVY9fbX
+v0tlb2cbe18Cv1S+lBWIZQu8YHeQV7/WPO9/JRza0b5TnO5lMIMPnFWtEWEWHwZxiEU8YhKX2MQn
+RnGKVfzhDAgAuKoqTShUMWP+GtfYxjfGcY51vGMe99jHMw5FgPf7miWs2MhHRnKSVbwJ77bqNw14
+Q5SlPGUqV9nKV8ZylrW8ZS5HmR4uDmxwBRIHOZTZzGdGc5rVvGY2t9nNb4ZzmeMgZAiHRhNdxnOe
+9bxnLpOgyayqb4YJ7GAx88KsE0b0YSv81oRiWNAE3vB3UfroAhMaxhFOdKbTuuhCn5bS8I20kyf9
+aftamqOY1nSq2UpneDqa1OINNaC15oQa1NrWt8Z1rnW9a1732te/BnatVfDbMF86NGjYRbKVvWxm
+N9vZz4Z2tKU9bWonGw2svnBo1hBsbnfb298G9gL+vKpAvzq1pnZqaA6tanb+F5XTxq6Ip82N2liT
+e9TzPnd+C73udvcbqO8+9YDxTe9xS/PeA78suqmrbn83/N/YxqarEf7Yehu8shPHrMLby3CHOxzg
+6Y43xi9bcb3OGtwnR3nKfT3sFwe8IsiudsxlPnOaT/vabi30tlW+c56fXNx4RTAvFCzyvmpcwBXh
+d8fZ/fGFh5zojiU5fQ/+9MzqG94CSbrSU830jTud6nyNujen/vWvGn3IHNd6u7l+dIHIm+yqLXjJ
+KwJlPtfd7nfP8pdbDvIxx9nvfwd84OE8Z5xfnRd3xnviFV93PwOdwxXxsJIlP3nKn7jFe2+6QGT8
+Y8533vOf73GQC+9ygRT+ufKnR73kmex4SV/87XQ1e52RnvZ+r/3sXn893Fkvatfn3quxbzXaab91
+iMMV976vatjVOXbkSxX42Z798FVte9m3vfldVb49KzKEYHTf+98Hf/jFP37yl9/850d/95VA7M0W
+WhZHgH/85T9/+tff/vfHf/71v3/4y6L4jQ6NEUi/ASTAAjRA9HODuJO63ru+qXq+iBM+6Us06gu+
+42tAm8q+1mK+C5ypBzQ+rJNA4hs9vuMFt+PAmcpAcNrAE4QpDwTA6AvBCfy/nRI4FqSpFBSVcrPB
+mHJBGoTBGJwwCoQ+69vBG1RAsdu+OVDCJWTCJnTCJ4TCKJTCKaTCKlz+QkLAvK4TCCyYhi70wi8E
+wzAUwzEkwzI0wzNEwy7Eghk0r9CwByuEwziUwzmsQiY4wuVjwCJsQasjPUMDQhkcwcwrQT1EwTvU
+vgQjRPzKQrbzwz8MQjbcFNNKxJjCQXZawUTswTb8QUfsLyGEQAucRJWqRFDRwVBsMD4kwazjRAqD
+RHmSOFN0h1H8lN9oAmWwxVvExVzUxV3kxV70xV8ExmC8RfEpr0h8DRGQgmRUxmVkxmZ0xmeExmiU
+xmmkxmQUgVbMlNIQxm3kxm70RmG8AkPUQFkrNBI0x1NhLRUkR8M7Ry1MlXTMwQdTR3YUxHYsFXhk
+J3Dwo33kx370x3/+BMiAFMiB5MdidEWeIciEVMiFZEiC5JpkQsiGlMiJpEiBBIf5OpWK1MiN5Mg/
+WhU16MiQFMmF3KNTAcmRRMmU7MdMYsmWdMmXhMmYlMmZpMmatMmbxMmc1Mmd5Mme9MmfBMqgFMqh
+JMrzuJqKGJZiORbeGQnkAZousaLz4RIsAomWWZr5QSWTQCXisZaFcaUHEoh+OShncZaiNEv0iJyK
+sBd8caCK4Bd/ASMeeiAX8hykrAOZ6Yg6ARgieg3eEZoU2J6RKaNngZkOARILO8vEFA3b6Z2YqQia
+6Z6MwBmd4ZkoqsswgqG/VKKNAJajxMzy8UvjaRZjCMxnmQRwOE3+CZJLxWTN3hAbgSAbGzqbthSI
+taHN1RSezgFLurEbj/ADl1mFq+TL0AjNjKGYnaCCpUGYrKmbkjxMRmvN6ESRpQGmiqCc3cFIzLHM
+udTNJcIgjgjOmXGZFwLNaPpLNMofxzSY5uSFrNmhz5TO+MwLxsQdyqAX7OwI3wGeLhGeLuHKFPpO
+zlyYOkDP8SmMLuEJUTrKqwDMQtkNvxGIGlrN4ZHPCsWL68mewMRP7wEf9VHNy6TL3UyfjvhNLSLP
+BSrOHkocwwgZgzEXLsHL57TQGc0LAapO3UBQuUmgFuqcEPVOi9jMHhIZ8TzO4yFO80QQgzGMlumK
+ERUIIApQxKT+0SkdiRMqSWZpm/cRCbr0UQeSIY6wGrwkUPjsSyTlzvnACMPJCAmdHyml0jf9iCTi
+COxsIlTaziWaIlGKSmnBS41IyozomJFhpe9EpajMiLqhFiAxF15AzUN1zDYNHjiV1Eml1Eq11Ev1
+HzvaxyvNiz7aR0DC1FAV1VEl1VI11VNF1VRV1VVl1VZ1VQNxpliV1Vl9Hme4BVrF1VzdJVRwBlTQ
+1V8FVlniVV8N1mLV1WE11mSl1VtwBmV11llVl1WS1mml1mq11mvF1mzV1m3l1m711m8Nk2KTJmdY
+FUkAAEko13NNV3RVFWfASFFBC4PUFAAgV1UxV3ZNlXtd11X+cVdWiVd5zMF6zVd1tVeCHVh8RZV+
+XZV/dUtIcdg+2UuBVYOHpdgoqQh9tYuK1dgjuViD3diP7ZGOxVeQJdkcqQiFrZqSVVkagR+GTbDU
+g9mYTbEMyCmB9QR8wNmc1dmd5dme9dmfBdqgFdqhxdlCENmK4AbQU9qlZVoe44ajFQhrAIOppdqq
+tdqrxdqs1dqt5dqu9dqptQao5QXTk9myNdtZoIGTpY97YAWiddu3hdu4HdrccFmhg8WWIi+bvY29
+7Yy64AWMbcRV7ESxPY3VMNzDFYzWAFwTDEXJQlna4NvInQu6BZpLJMS8fQvJ1Vyy8FvAVUXBRSzF
+AtzCRdz+0jVdp1Bcg2XcSXTctXWMzYVdm6BccR06WMRczYjd3KWJzjXYzwVd0SLc0xXe4UWK1MXX
+1U3E1vUK3WVemJjd9hOIczCD6aXe6rXe68Xe7NXe7eXe7vXe6eUC9qPXiuAAAjDf80Xf9FXf9WXf
+9nXf94Xf+DXfWhDb9+O/+8Xf/NVf/fM/gQDcd0CHABbgASbgAjbgA0bgBFbgBWbgAH4HsWWH75Xg
+CabgCvbeBBQIlIWAP5DfDvbgDwbh+OUArCrFULxdXtiM5lXhmxBb3/3dtRJdgyVd4qVhwzVeUGxc
+tV3eFV7h5y3hSTzhFOZh5uVdfHXhF9604K3hJV6NGyb+wrsVRR22i9cdYt31YcvVwyCu4uYt4k1E
+YkVTYiYW48Bw4kGE4ijOYNfdYua94jy03ZrN3DWO3S4GwS8GrRjG1xke4z2GijJGXkJU3imW49xt
+Y4EYAjpE5ERWZCrEQnUR2B/QgkiW5Emm5Eq25EvG5EzW5E3m5EiGBbHlwjQU5VEm5VI+wzX0X4M1
+B3Jg5VZ25VeG5ViW5Vmm5Vq25VtmZXMQ2zdc5F72ZUS2wzSuCELo5GI25mNG5k7+ARLG4iLU4kGG
+XToOXDsG41TOYz7G5qjw4zNGY154XCqG5sgtZLvl5mcOZ8mV5iOm5lWz5orQ42yGZ6oQ2z/Ww0Bm
+DHD+PufbGOfaNUVzzue9Ted1Dt0wjueCnoJt5mZ7htx/3tt95uZTbAu9ZWiAbmGBrua/lWGD1miE
+PmOFxueJ5oxx5r4DJOmSNunyW7+IrohhaIOWdumXhumYlumZpumatumbxumWpoP63d+e9umfzr/+
+xWh8hYcyMOqjRuqkVuqlZuqmduqnhuqoNmp4EFsBPOmrxmqSxmBvpg8IeICcBuuwFuuxxulhYGY3
+7mc4xl2Qto2AtujCwmN31miD5mgo9mi2tg2HLme1RmG8rg23fmu1iuu+mOt4ruu7vWu/7gy9PmN/
+VuzHAOzARqvBNo3CNux5fujEfmzIGOfIO9vPTr3+y3PkinAFPjDt00bt1Fbt1Wbt1nbt14bt2Dbt
+ZhDbzWva28Zt0BO9oa4IMfja3wbu4BZurxUDsSVb0EbuyVs9rq4IAWgE2Ybu6Jbu6Y5tVzhrgaC7
+xdPu7c47MGsWgVUAuRXv8SbvoDXadu47wVPv9WbvNiM83hYIcTiD+abv+rbv+8bv/Nbv/ebv/vbv
++RYHsUU87ibwAn+DxmPugWjb8mbwBhdvBbhucm5svhbizZaLyJZspaLsd7ZsJj5sWNRsC5cLxoZi
+xxZxzq3oDJ9sgu7wMf5wUwzxEycLEr9bE5fxsMBwFV8v9K7sFufjF89hYRbkG5eMCKe1nkPyJF/+
+OfEV2AEAgSeH8iiX8imn8iq38ivH8izX8iePAbGFuZoD8zAXc2i7OfjmhXVIhzRX8zVn8zZ38zeH
+8ziX8zmn8zRfB7HVOSXX8z2vgZ9LcF6AAD3Y8kEn9EI3dC0fgAjnZxOmcCKHixzXcXdjcR9fYiBn
+XSm+Z0efcUV/aBvX9M/gcXWO9F7YcErfY0tPXkxf6E+XXU7fa5Vea1a3CUgfdaEqdVMXY1QHZFX/
+aFl3XlefcFjva1+vCVqv9YfjcQ7H9dPV9XrmdWIviwgvAj6ndiVv5O+uCEY49G3n9m7H8mUQ23oY
+83En9zCvB7FVhzpX93Vn93anc3XA82qX953+83OUJQRvx/d873ZGAPYSb3RoB3UzF/VIv/Vlr+Fm
+L8IYB3iXoPE3FvYKX/iWMPZjB7BkN/hKx+yEfvaI/3XH+2FM/HeOd4mJp/iCv/jhRfgdVHiRL4Vx
+zm4Dh3nF07vRFojwdvCbx3nzFlsya++e93n1fm/Ale//JvqiN/qj7+8A5/EBj/mmtzsER1kBWPCc
+p/qqxwcI9/gOS+6tlzzRxnaBKG3qFvuxJ3vXpm0et+3cVvu117HdBlzfHu64l/u539ri5vHj5vq8
+T7HljvrnLvu/B3yxt+6sR2tGf3iWH/kUp3iiMvmTZ/aM7+iNR3zc6PcaD/nJLwWSP/bGd/z+0k15
+G1x5kW/4tD58zGfhUF98Sbf4zhfez2fB0Of4ca6E7aL92rf93FoCvg6ES+D93vf93wf+4Bf+4Sf+
+4jf+4+d9KwDlTGD+5nf+54f+6Jf+6af+6rf+62d+VDZzFmCD7vf+7wf/8Bf/8Sf/8jf/80f/7mcB
+sbWu23f/96d9XFD1QkD++rf/+8f/4w+ECNcrgUUVwAUIXgIHEixo8CDChAoXMmx4UBIASQ4nUqxo
+8aJAiBIxcuzo0aEzAB9HkiyZQiQvAClKsmxpEYAzlzJnItRI8+ZNmzh3ttTJ8+fHkECHejwpUCXR
+pBdhKm3q0KfTqA8jSq1qEKrVqkKzcjX+mnLVvbBix5Ita/Ys2rRq17JVCyBa27hy59KtG7YVgFZ2
+9/LtGxevXr+CBwsGTPgw4rnRACRu7BjtKpQAJlOubPky5syaN3Pu7Pkz6NCiR5Mubfo06tSqV7Nu
+7fo17NiyZ78W+Pg27rCSIOTufViAJAG+h/sFLpw48rrGkzOXC0FS8+hxuVKvbv069uzat3Pv7v07
++PDix5Mvb/48+vTq17Nv7/49/Pjy59Ovb/8+/vz69/Pv7/8/gAEKOCCBBRp4IIIJKrgggw06+CCE
+EUo4IYUVWnghhhlq2N0TFvBizEIgJmSMMSlQoUaIaohI0IofbvgijDGilwKIIF5DhTH+JxbUokE1
+NsTjQC0CKSORRRqp1CQe+rHSkj5a4Acv1/BYIonXuPjhNeCkoOU1JuqYQgoe8rJll7xYQAUVHoLo
+B47gCDTkkXHKOadH1wDByyrXPOFji0vueA8v96xyJZ+8qHHnjR+iGKSLVDzBCzh78uLoE3XQeSmm
+mVrkIxBW+mgoECvtyKiIhVpQolFTYqnllvd8Cqemscp66SSrqEliHacGusqjPQIq6KSGFqrGSh1e
+SeqVkzT6RKWzOvssndcA0OubLq6CY4kFgUnio9eC6aKIXkJZarUgnknFSmvieOex0Lr7Lrzxyjsv
+vQx1CSaYVta7L7/9+vsvwAELPDD+wQUbfDDCCSu8MMMNO/wwxBFLPHF1VOhrgbK8GNuuQiSSqOaH
+HqfLIonoHlRHyYt6uZKKxqBM5ctK4kjFuIMKtAqsCIUpkJ0DiZkzySSOzMvLxqhYUNHUBukyiSiu
+/GbJYlL0hJs3L2os0AQVjWKNIrfrsckGvazjmGiudCrT28ZcdtjG2Ixn1tqK2bNAPzvkcbZde/x1
+yaIS1PLLvLCZI5Qh57jo1FXjuWjhcQu0tYhFgzxQ0ifnKOrgNJuJK5VMG822qG4PhHNFFtedsZnV
+/ugxyHh/CvXlBqGNMpMzFz424hdNknGnAtGoepQz5w58uaMyerPUx0u6s5l+Czn+0D1APPoEEK4q
+Do7jAx0qUJK2odSil8kTTyiLxgN70IrMWzB0sBYBsSgVA/3e4o2H9ziqqsfjKf6Vy4u5vv6Opb50
+XS97AtkeL7o3JnINBAho4p+q8gc8WyFERNGbXvWuRLeKvE8g8TPU9whyD+Hd73gSvNL5jBe/C2os
+g8RL3/8IOBDsVWR3AundAoFXP7KVr3wnXBEF0Wcb6bUQUCLa4EUSRTWBNAl4T4oSkCJoPB2yq4dP
+YN+xnnczfUUJZ6uAkh9IV5FITcpK1GPgzTxYQhP2UH9wWtHzVvTBigAwjEycH0GeKKU1Fq+Nx0Ki
+6q74tQDC0YdfFJwYKUJG0xH+C43EEojiAgiuKf6xisbL00CuMagjWnIidbSZGMGHIkAOkmNa5Jjq
+QIRJnr3tlHE8ZBgNGDyNVa2RToTSHik5ST+uiJSqW2UXNdhJi1jMT5JC40D8tKO9gYt1pRwf0XBl
+xDa6cplqGBRYZDkmCzzhgyk4GioltcymXaloppSkG30YtYssMQVQOiYqBec3ygmtXM48JSpfVodp
+prOf5bomnlxlkTB184biBBIp8cY1w+WNlxUcn97AMTyHtBNKk/ADMpM5z8fVM3IeW6g/tZYjcOQy
+pIUkFUCzScxrKFN6GZVnj5ipt4YS8qHnxJ1HdrcKFPUOmYfaKETPqb+ECqT+oNXUHzA1CaL4xU+b
+h8JYoIbWoiumQGlBfSbw3lhTbRrkfR/sKcd+KkQfUrKXwxSRUampVmQxNZ4LeaqyUsDPqa6CV3zc
+ZU15NsxfclGTbqWIV1tIPhGuAqil/CE6r3SopLZyrcVrqzZ16rS5/i1UY0WWQ/VqU8b+1SJ2+qDH
+cnUsQVlVkq974eggyKgB5jVQRKSeQFNQ2M4mhAq9m91pO3jZVPoRhW+bImu5WhAL1BV2uWoRaW2K
+2dYGUa2sRa3vYugi2WJxIra1Eo1cxr49cVGXp31mc8332gwKN4/FBZzRWgRA5Q42rym0YvXGCyjo
+brNuI6MubQ/yWd/hin3+yd0tXukb3h6yELb5BexGPUqia9XTuwxNF+vAZljJ+c5smWWi7VwkLU/p
+bo6qK5oAzOngaDYNbyup3G6fdmCG1KFwpBIZg7PlYBOTOL19s9zHKhw2+oKuWhtecUEm4eFyeuwE
+2CPRXWc60+zGTrmZa9xIWtxDEx9Zxpml8NZQjLSPCi7Dre2xhgHAYfclmKMLxhZQI4g3hqKtyZd9
+MjQpJuc5y+he+OouR/AFpvmqZ3344t9F/AwmQGfFzvn6iKFTgOfz6FmuIxE0865zj0aPJNGLNk+j
++dyRTNO5057+NKhDLepRk7rUpj41qlOt6lWzutWufjWsY91q0frMUgP+EWSgULIUy4DoHpLhda4N
+4mvKgMPFB/F1rpPHmGFbZiWX6bVlNJcSTWvN1rdeRR0AUIeqHuUy3aYMDvkIhN9KK3d+YwxGmE2Z
+YKfE29MuiLqLrRBkpwS5IsEMiDDz7cnIm91dBcDwXDUZ3ap7Mr+qTL8REm1AneQy1JZ1VFJgyXET
+xCv0ruzASzsQdMNbMg+/OPR0bQEpIwTZvq4DtTh+FE2rPOQVR/m7DeKHybi4m71Tg21XfhCOPwHb
+pX1kMq2dwEh6JebXzjYPha1rlxudIC3398iN3fFuow7kLX+6zn0Hc5DfejLzVAMAlHXFrS+d6WYi
++c7n23OYew/i1gH+e6+eAAAX+yHbbS8IOHjVTVhhnd59L7u/xxTJqfvayldn+cfLjm6s82LcFPdd
+JMFuJca33MoDmQS10b7je9g966Mznc9LDni/P7zpgd9SQvzusl5ZHfFpd/rBDzIJcMyeRfNMU+DN
+LviEqFzufOa6260CDjHVPZPDRwnwjcF6wG888Z7X/d15JmbR5xrsizo87JVekOljXe5+GPlAqIA6
+2zyK8pq2wOBRWVyNAbyotNf10x39fBGO3uOvpz9Bfnxsj+c88Ng3yNWhCPBNiqK1H/vljhpYyQCC
+nP4BIJ9VCrUMYPBFHLvM1ptgHvIxn/ykX/Npn+nlXu4xXrAh2+/+NN3/4Z/8ZAzWgZ/3zV8HOiAK
+ZtJvMZGtnYn8yBX8lZ73XBoIkt79QZ8Ikh7YQUnrZR8M+o7NAF+5EWD0TZ0HvuAR9pyxSeAENgXc
+EY3K3Am9SeDY6WC7VcbdXcZKAB/XBaFIIBvVeMgJfiFljKFl0BrWWVbjsYsIPtvzcd1FnQyUAEHG
+jJC/ieDIjV/HVUbsseFkiMjTlaEO+mAKoFwRbhywGSJSgKCQcY+tSWDBZeD26aAdQl8VSkWa+EHV
+cN6jbCHzTQLK8KAL+qATxmCUTN/+sRspruHfEcQqVM3TyZ1lPIr4DRegmF8eDd5ejQmvTF+lFOIH
+3gM4gIMX9qD+/R2h7jWgE3IcFYDF0q0hFFrA9AEfFVgGLhmgbXjIAi6dNBphAoEjFX5iUkzCuIlK
+wxEi8LUKQ9RiMtZfxXFg211cqNCi8zHd06Ff13kI6nUdlABjkMwT9SCEGuTKB2Wis1Eb5wliLE5j
+6SXi0g3kRHIc2BWdCVak63FdA1bjm8yTZY3jPfKe6zWhOkaFtEiUB3Kd3E3UD/pjP8Zg1KXeGepa
+pfDjE7Lb01keENyJzVnJjXyQQa6d0lgAoUEK7T3h0/UiQ5DhM25iK94k9Rldw5njB3Zk7pkIQaCi
+90zCo6CiAjLfxVnlD4KlJ65kU1ABB5piZRhDJqKkB+pbwUH+G7FJHeEt3STQorcx4NxJIgSAo5lM
+i8Zgm7bZlSQuXmWEm0ElxEks2sV5m8NdJQpixi9aRq7l5bxN5aRcI8tVZstpyWa2YVNmUmAGSjcC
+AMGJYWkCQMLtXGUkXTqypW3eJm7mpm7uZp65DjnhRJvhzVJSSHA6E060jOsYFnsUZ47xpnM+J3RG
+p3ROJ3VWp3VeJ3Zmp3Zu54D4pnd+J3iGp3iOJ3mWp3nKpH8gp3muJ3u2p3uyJ3r2B3O+J33Wp32S
+p4LA5n3uJ3/yZzc24374Grb0J4EWqHn+Z4GchIEuKIOCJzhooIBM4oD4GoDqB4UWyIUSCEcKyIYW
+iIQKSIb+TqgI9keIciiE9keHEsiHBkiJsuiI8keLAkiK/seMRqjfeAEm5KiO7iiP9qiP/iiQBqmQ
+DimR6mjIVWh+hOgNvAKTNqmTPimURqmUTimVVqmVXimT3sCRJqiuXUORfimYhqmYFqkXyM+JAoiE
+ekIprCmbtqmbvimcxqmczimd1qmdruklbCmBhGgVTIGf/imgBqqgDiqhFqqhHiqiJqqfVoGeDkjR
+3QM+3KmkTiqlVqqdeoKZ5qffqKmldqqnfuqc5qn3ICl+8KminiqqpqqqJiqjjiqXQk+kgqqszmqn
+YqrvnOl/pCmt7iqv1qmo5hqp3oepriqxFquxGmqrAuv+q9pGrPaqsz5rKdjqmOCqf+gqtF7rrv5q
+jP7HsB6rt37rqibrtvrHozYrtp6rp0prjQaIhNpAMrwrvMarvM4rvdarvd4rvuarvr7rAzQqiKrc
+FoSDwA4swRaswR4swiaswi4swzaswG6BvwZI0RHCvlasxV4sxu6rDWRqgkioA7gDyIasyI4syZas
+yZ4syqasyq4syL5AxAJIiBJDL8wszdaszd4szuaszu4sz/asz84sMbwsjeraPcwCyx4t0iat0q6s
+A3Asgnjs0kat1E5tyrqsq+6pysnsz24t13at1/Zs0F6toxKt0VKt2Z5t1DbtrWrqQHws2r4t3Fat
+0Pr+R8x+rd3eLd7ybNgqq4aSbdz+LeCGrNpOK9sKhNsGLuKirdXyrYjymdbmLeRG7tfu7biiqN8m
+LuZS7eCuK5r6DQqUAOiGruiOLumWrumeLuqmruquLuh+wtySqMrRAhvMLu3Wru3eLu7mru7uLu/2
+ru/OLi28Ln8UHQSwrvEeL/ImL+uigNMeiLWiK/RWqra+aICqXJ+CK/Zm76GKK/XqR7lGL/hOqrpS
+a388b/ier5xOb7DaR7dqr/u+L/eub318L/rWL5yOb+HyAqfaL//iqfBWL59d7/sOcPbG77IGirn2
+b/3ib8d6rvI+MARHcOq6rtj+K59RQw5ksAZvMAf+d7AHfzAIh7AIjzAJZzA1/K/36lrxSjALtzAE
+M+/aNnDbZi4NR+3iVi6MZq3k7jAPgy0K58ejlm0NDzHLbi758gfUErESy20Fu6jj9jAURzHNUm73
+AvHlLjEWk6wR5+/hZrEXu8MNV3Gp6rAUl/EOU7H80kcQfzEbb7EMGy4bf3EYp/F81K0Z33HeovEB
+F20ce7EbP63fhIEJDDIhF7IhHzIiJ7IiLzIjN7IjD3If/PAY81nAOqwlXzImZzLDQmwTy6iuEcIj
+h7IojzIpP3IYNK+BmK8Co6/6Yqj1EjAsg6sB9y2srjL/MjAgD8T+2vL5tjLWBnAsB7OxzvLY1jL+
+L6MvLjvvph4zK0uysL6yMEdzqhKziRozM4NvMqfyMl8z+Ppy4w6EAEuzOG+vM9sH/XIz9Gazh/rN
+NpCCO78zPMezPM8zPdezPd8zPuezO7NDOddHiD6CDAS0QA80QRe0QR80Qie0Qi80Qwf0I/SzGqsw
+GegzRVe0RV90Pm8DKq/zDPcxFs+xKz8xHo/05EL0fKyxRy/xHytzR6c0EYP0Lw/E45I0TfusHtOy
+bQixS9fwSmtzS+80DcP0NwvETNe0UefsTRdzTgP1EPc0RwvEKcyCVE81VVe1VV81Vme1Vm81V3e1
+VC+BSctHiFKAKpS1WZ81Wqe1Wq81W7e1W7/+NVyXNQWEdXwUnQBkgFfntV7vNV939SlstIr6jSNk
+AWEXtmEfNmIntmIvNmM3tmM/NmH7AF3DR4iKwxlcNmZntmZvNmd3tmd/NmiHtmhftjhM9nvYdTdA
+tmqvNmu39mM7AmAPiCqj87V6swWD8zjnNrKatnucM21jqzoHti7/NrrathPjtm4nd6BSs8QSbQIT
+t7MGt2xvM3RDq3HDLDQrt3Yztydbc3VHd2zb6ECgQBCUt3mfN3qnt3qvN3u3t3u/N3yXNwUz7m0L
+xAxEAH7nt37vN3/3t3//N4AHuIAPOH7PAG+3B/GOQnwvOIM3uIPDNwwT7hvzQhczdeIKdX3+80JR
+HzWHT/GBswdKWzjmOrVww7GIYy6GHzdRdziL12xSV/NSn3jikvh0/7SM/22KY7dItziLv3hzQ49O
+33jc0rh4m7iQ4/iHr4cd83iH+3h3x/iRD3l4s6vfPEMYXDmWZ7mWbzmXd7mXfzmYh7mYX7kOJLl6
+hGg1/IKarzmbt7mbvzmcx7mczzmd17maV4OZp8fEjjmf97mf//mYP8OUd+5wf/ezXje3Zrd2Jzd3
+D613G/quSneR6y+kOyui062iL3puNzq5Onel96qkU3mhfzqtXjrsArOmM3qez4inkzqthjqhC8Qu
+u/qnmnoOo3qqb/qqM1qr0zqownqusjP+Rg87sRf7PfNzJyc6nwF0Qze7sz87tC/0Qyd7pw8EBEy0
+sWe7tg+7RsdwLht5lL9tjiu7TDN5j+86pl1xuKMtkYs6uK+72Y47pu+4uRu1kzs6lMO72bZ7rFO4
+visuupfHktd7Td97tef7v0stvwf7QER1Xz88xEe8VoM1tZ/6QFRAXGe8xm88x8N1BQQ8edg1Xks8
+yZf8w/+1t7O0QAy2a7e8y788Y0t2xd/6QFj2aN88zue8zod2ac/8fqA2zAe90Ls8bKe8T8u6r8uq
+rQMwcuf6OHO65T560lcqsFcrdU+9pS69hWa60wsz1A9vr2M91Q86wyO92Gc9yI9H+3b+vdenvXj4
+9tlLatWXr9/4wgHcPd7nvd7vPd/3vd//PeAHvuDfPTa4fXiEaDYggeIvPuM3vuM/PuRHvuRPPuVX
+vuJng+GDB/EOPud3vud//uD7AtlbvY0n/NLKu8WvOMHbe+Z/R4ibftqOPt2XPuwjLerTvOqvPk0b
+fNQjfO0j7cKT/rv//tHePtPnvu6PNO+DPZAT/9IG/+wPv/OrrPFvPb0n/x0v/8+r+/Qzrewjsd8k
+AuiPP/mXP+AXvs9b/0Bog+W3v/u/P/xXvja0vndMrPnfP/6XfyJ8/37Mdtz7KkDwEngPwD2BBxEm
+VLiQYUOHDyFGfEjQoMAqUzBm1Lj+kWNHjx9BhhQ5EmOVgxQlplS5kmVLgSkAnMRXimZNmzdx5tS5
+k2dPnz9pejoI02VRo0ddAkhx0BNQp0+hRv156WRBpFexYkVpkWRXr1/BjjQ50GpWs2dVEh04U2pb
+t295Cn0ZE21duxCVMoW7l69bqmQr3hVsdyuvi2ERJ1YMciyvwoMhZ1XrmG1fy5fjDqUbmfPZvAId
+ZRE9mnRp06dRp1a9mnVr0T6qBu48u2VhcWdw59a9m3dv37+BBxc+HLe42LSRs5wsoJtr58+hR2/t
+SHNy6y0/8zo1i3t379/Bhxc/nnx58+e5Lzl+nX3DwhVUxZc/n359+/fx59e/n3/+/Arr2wsQoeUy
+QM/AAxFM8LxTqhPQQYWyc8CdCSms0MILMcxQww057NDDCV8A8MH2CiOmlxNRTFHFFVls0cUXYYxR
+xhOJEXHE6ya7Z5YPeezRxx89dKDBGx+MEMgjkUySwxABI5LEsngxccYpqazSyhhrbNJJHDfTUckv
+wURSyLm2dNDIMNFMc0kby+ysxCvhjFNOGLN0DMo2Z8txRzX57HPCMXmZDE/rsjvkhUMRTVTRRRlt
+1NFHIY1U0kMNYXPQwQrLJpNNOe3U009BDVXUUUkt1dRNs7H00rsmg2CJSWGNVdZZJT1kyFVpy64p
+zHjtlaa/7JQNV8EKO2yxY5H+Dauxx4ZltcvKfI2WL7kC3axZznSVVtu9gGX2WrSKTVbccUVa9s5v
+0coR2m3ZfYpaQdEVLNt26XWq23PjzSpccvnttyRV8z1K3XoJ9uldawOua96CGcbpXmETRmpffylO
+1lyIIzZq4IY5rungjO3K7pkwSC7Z5JNRTlnllVlu2eWXSdYBYJBXKqyaX3DOWeedee7Z55+BDlro
+oXGuZmaaU5qMEJiZbtrpp2F+5lakrzrTz6vDZDJYqo96c86vwYazTm+5TqvLPbFOO0lA4S27KKvV
+jttHrcl2OyKvw85b7xfHxtfuiPSUW/Ae2Ub4b5bgHlzxDOn2+3CH8N5b8sn++8b48YYCX1xzDAu/
+PKmlBJJw89EpbNxyzxWKfPLVw64cdcDPJl32zl9XKbsmlMld9915793334EPXvjhidf96NoLE0GK
+5Zlv3vnnoY9e+umpr9765UU4/vXJrine++/BD7/4Jqau/aHszF+o7vS3Zl99x9lv230y53cI/frb
+x19L/fPXX/75/6e/+9VvfekroPkOWLsAxs9w/OMFAMBhDAlOkIIVtOAFMZhBDW6Qgx3UIBXgZ0AA
+UMGDJTThCVGYQgmC8HTpg4kKYRhDGZoQHA3k3wxxmEMdTlANDuSFGnYYRCGisIcOtMAQkZjEDPqQ
+iU104hOhGEUpTpGKVbT+4hWxmEUtbpGLXfTiF8EYRjGOkYxlNOMZ0ZhGNa6RjW104xvhGEc5zpGO
+dbTjHfGYRz3ukY999OMfARlIQQ6SkIU05CERyQsgrAIh1wBAEV9ykBBCDgCVtKSdBGJJTWZSWASx
+JDj8QMlMGgMhBHmgJitJSlRWMpOaBCVZGAKERybkHsaoJBCK6ElNGkSXEAwlQ2Cyynv08pUKUQMj
+z9fChFhlkispyBOM8YRETvMufqgDQiYBjgFt5lxPWEUdRgjJ1BnOlA/E2LnKyQsL1OGX72vlJKqC
+kDv5DUopqIM004mQJ1QSdAJRAwDg+QR74rOB6VxnOxmSz3TCRJoJMYb+OIF5jZRYJQUSzYpVLIBM
+am7ULOw8CBX6eQ9wSlJYq6CCRL/Z0HGu1JwLQae1UqDNhNIFAMa4JyxJKs9zysYq+TxINrOJEGP0
+kxdUsAAmWfoSmbrHWvk8lxqWelFlJsUgT6iDRTma1aOsApn7LOITwDEJbgorBYFxnE+RSs9OWsuR
+WKUlTe9BBSDglJM6dSlPe4jWolZ0lrzwKkLUIFG95rOtooynJN0aKNAZwwI1NCoI63BUq6gBsqCj
+LD/rapUnyDKypFRDCuz5GW9WchXSHG0dYFKRVcBTq611iTUFYgEqDKWsY2VqYg9bSrje9a3LtFw5
+C/LPUDqVpzsdCjL+0erIHoKUrr1Nal2ZqlvaKsQYrB0hSvNiz5ailhfXqINBqvtDZhrEKsYAwhOe
+AELH1IGRfpilMUq7WUbG9BqjrcgkSOla/a7Eo0BgbVyR2tKFrJO179tlWlGZ35f6dqZ1HShx5Zng
+VmoSdGidxGx5MYlrBvitqGyugBtcFVQe1a4P/GU5TWkV9uK2u+M1Z2ExSZCGFsSRDf0nLyIrEEdW
+RK/79fFCUlBaAEjUqry0LS3BAY4WohW4xpXuQWDM0rJQYRUQzimEAmOBIXNYICDUZCiVW8qjDpat
+W45ubr254SuXBcUxsco1VgGOOuBSnVQAhyzJm+d0OjLABeklK6H+xGYb/pjQ/owshv+cF3TWocBn
+frJanavUM5fln4Kap5Pr6tMoU1kgQ0UIEJZC5gFF1Z255XJZBA3LOwm0Dv8soouDa2ZTppPGhgMH
+iXc8EDUXmtcISXKj6XouKgA7xI/GNF0POunABLPE0GVwTn2aAgwLRMNkmYQ0NSzYgm4m2Yalqzfn
+KlTr8pguKTYIdwMFDldnGAChdLF50ateWoM3vqsgJX3t+5L89prf1cItrT0szGIfdpXM9DAxESpl
+2aj3yhM+8J3AEWpUxrTRjjyxl+lsp4lrvJLF9DbHb6nSlyAz1Zi0ih8w3sPQDhWgLoYmBFcRk3n7
+VZYAOO9clJL+giL6t98997lDrkHqutyjoSJFilVF/nOl/7zKg4k4zTVaFNAuneorOaIFSSwYIFqQ
+qFy7egWz3pJrdB0tQCRt0lsS9aqvne1td/vb4R53uc+d7nW3+93xnne9F1KJffd72PG3db8PXogQ
+rZ/gCZ94HEIRgop3PAwHOD+CkPDxlS8hC304ectvnoM1ZDzZ6xd59yXwdaRHnek9t8DQg35+omcf
+6i8H+8fJ/nCqbz3r3ed6EU619M3sPe9RZ/vc91MSrzD+8ZGffOUvn/nNd/7zoR/942NV9wiEEiaw
+n33tb5/73ff+98EffvGPX/vaOz2UpJ9+9a+f/dK/QfkcmJ3+YlSM/scCg1lxv3u9dKxj1KL93wqD
+DepvABGjMYSPfeSPABXQK+5PkvLP+gJjV/ivYfzP984vMARwATUwJAxw0PAnATcwBDuiATPpAZEH
+SiRwAgumAoHPcwJQBGFQIzrw8w5i/mIwBknwgUzw9/ZPBVfQ/FwQSjLwBkVwBp8oO7qgB5RwCZmw
+CZ3wCaEwCqVwCqmwCpeQEBww86DkAtqhC73wC8EwDMVwDMmwDM3wDNGwCy8ACGMPSpDBCuEwDuVw
+DquQEuCPf7IjH2SHdGYB/7QwMKSEdQTxa1zHgQrjBfZwdGjHifIwETenD7PQEKEkEAexEq+kEPnn
+EB1Rcxb+sYkacRMVBxJL8A8PghIt8RRnBBP1RxNBcXA6kYk+sRXlRhR1kBQFwhRRMRddRBXxhxVl
+MW5e0YeyIw9EoRiN8RiRMRmVcRmZsRmd8RmhsRgFAQIiMROhpACAIRu1cRu5sRu98RvBMRzFcRzJ
+MRsLgA1nD0o0IBrZsR3d8R2hUQPuUID6yQaJMARzsPpOMAJ9kGFY0BZ5YQjvUQONkBHrcSDx0Q8l
+kR/7kWD+cSEPQiARkgAL0hMPciIXMB938AJ7sCHb5SGtEQMxcgErEhb7aQOIIyVVciVZcjjgQACq
+cRWhBBSkoyZt8iZXAxTQ8XAK4w5a8ieBMiiDwzjoxyD+D6ISFCQplXIpyyMDYHIUIVIgKKA/qLIq
+rfIq+YMCdhIAoWQJmPIrwVIpGWAeP7Cf9PAX44YW9ZEHb1EX3ZJvttJufBEtsSYY488s6VJt1HIj
+gxAQ3/IvV4QXCQhKEDEv65IsV+8gztIw/WQvARIXAdMtBVPyCJMxr8Yu8bCfuqADOLMzPfMzQTM0
+RXM0SbM0TfM0OTMXqBEqQ/IgeGAcYDM2ZXM2abM2bfM2cTM3dXM3YZMH4tJtCoMTUHM4ibM4jfM0
+3QAxb68GR1IBNRIgU9AjtwUkZVIkm3MAS1IYL/I66e85o5IXolM6pYU6e1EIubP+svMumfM8K8Y7
+W1P+IMJTPH2FPAfTOtnTX9IzM9fzPvvFPauzI+UzWuiTMu2TP8klP+nxIIbgOBm0QR3UNLGQNf9T
+IKCBNy30QjE0Q3cTGn6zbAojFx40REW0QZlAOYdPMS2zMRXyPaMkMl10MkevMlOUTzAzQQViMWcU
+TRzzOyHTRVERRl9PRnMUTWq0LFF0SHV0RSe0RX30L4FU/wSiMJEUTIo0MW90SsNkR1m0R5u0Ep8U
+Ag9CSrF0bUwUAftpDyQgTdV0Tdm0Td30TeE0TuV0Tuk0TRFhNWvxO3VhBfi0T/30TwE1UAV1UAm1
+UA31UPlUFzqUawpDEer0USE1UiWVTuWxKC1yPw3+dFz8szwZMkDHc1Gp5gUz9UDLNH1AcFTFZVPr
+E0A9lVcGNEYLFFWPBUGNVCDsUVbtT0k5lVVb9TJeNUhjFVcTg1atlBfQdFKRNVmVNU7vNCZ3VSD2
+FFGldVqptVoNVVH3Z0kddVm5tVuRtVKrhQavdEyVREuXlEu7VBC/dB/DlFyVpEqXc1zd9UjM9VmZ
+NF1zcV3ZkhfEdF59BF5PVF791UfqdVXbEl/zFVSRZi4HlkcA1kyPtGF7pGAJtBQRNmGz1V77VWI7
+5GFNtZ8WdERFdmQh1FkNlhcqVENVdmVZFjc5NGNPFkRJdmZpljNL1FJNElOFNTFUtWLhs1cFVGH+
+aUZUd1YxiDVeeeFWizYsehZWeRVop0VoQYZol1ZZStV8TrVqwaJpgfVpoRYufhVKA1JrC/Bqaydr
+ybYruFZs4/NrwVZqM4Zq05YkjjZgeeEcYiFv9XZv+bZv/fZvATdwBXdwCTdvyQBP15IjBYIHkqBx
+HfdxITdyJXdyKbdyLfdyMbdxfRNmfZYX2KFwQTd0RXd0CTc5cVY7I5ZjPYRinfZgL9YS9VVx+VV1
+HdZsXycWaZdDWLdrXfd1BzF2+7Jdc7djbRd1cHd4M2R3xRZdfTdvgLcNA2NjkddCPBZr+wkpwzJ7
+tbcpnzJPWXQqsTJ8xXd880MrObd1ecErt3f+fdmXO8bydNVTIFBSKOm3fn/yJU22c2kSJ/m3f2tS
+J8+Xd3nBJ+23gA14KIvXc9B2bkVibcH0Z93WV+E2YuSWgTkwgS9ngS34IxyYXSE4gvsibB94bDdY
+LDD4cTS4hDmig/e1bUFYKkTYg0lYhRnjhA9nGOExh3V4h51xGvMXfbGxHIV4iIm4iMfxHANYbNeR
+h5m4iXMYXA/wY1N3ei9EeUeYeZsXbJ43HaOXijWkes8WL70YQ6xYhrE4i+dki3lSSMe4QsD4dsW4
+jSukjPf1jNE4TtSYK7tYjt3Yhv/meOWYjmXXju/4Eic4YRhWjt/YeDWTDh35kSGZCiPUe5f+lAvT
+8JIxOZM1+QzXMIlH+A0jOZRF2ZHtEH7101ZpOCRYWHZd+IWhIob3VSJTeSPqFmJReZY9YpWD94Nd
++S1gWXZlGZf/xZRtNGmFeQR19WRbuZeB4pd3eYaPOSNqWYpvOZozQpeh12uZuZkPOWAq+Jin2XoP
+Am9Jt5zN+ZwD93B/WIAZN3Pd+Z3hOZ4vd3P7x14/F53xOZ/L2XTD9QjjmI/dQZCfmZALuUryWC7Z
+mI8XWYH/mY8FOpt7t6Cdt5vzJZHbeKEzuKEDOZk7l6AlOhUpOl4seowxGoX7aRDaN6W11ynXWWwN
+gHxhOqbF1wBCGl0KQ31VOqeXcgf82G7+smN+DziohfoM8FdC7XV//TeplVo1ALieT5aAhzqq7Zco
++9koq9mapwCbuVibt9lgavpbvlmYwzmMdTaatXqNO7Wro8KZIRqarXms4bisj/ms9Zir1Xon2Hqr
+BSKYxbqn3QYJPSCwBXuwCbuwDfuwETuxFXuxGVuwEZcv25oZYGCyKbuyLfuyMTuzNXuzObuzPXuy
+meGrr6UwhKCxTfu0UTu1GRsQ/LpsALmNH1qv7/WjW0e0m2Wkvbikb1ijYZuj0dejaZtObHtYcJuK
+dfuPeXuMYxutLTa4a9uTZVh6Sbq1uea1ldu3BRi4nbtFDho4E1qRqZtqskMZ8qG8zfv+vNE7vdV7
+vdm7vd37veHbvCEpcZ/ZBVrgvvE7v/V7v/m7v/37vwE8wAX8vl1guHGlMCohvhV8wRm8weE7CsIb
+aeiboQFySS0cf6JYnFH3Oy/8ZP3HA4v1lFm0wzv3wxkvgjgvxTFowtOR8lT8xVfIAoPQxWFcxT3v
+iWo8xyUI8A5Px3Pc8OYH8Xw8xfeuyI38yJE8yZV8yZm8yZ38yaE8yqV8yqm8yq38yrE8y7V8y7m8
+y738y8E8zMV8zMm8zM38zNEcInLsINZJnyoMxO1HwoBLzsnJlRIuIVgNANhrxlYJyr4JglIA7UTM
+koDgGhKNxdP8y1Mg3ARikbbpw37+qOZujiHwpcmeC9k8iiFMSqKuAQgUDGO8axUkirKmLamugYSa
+LdFVHbAAoKH2qZ2sqdxsLb5QndIhxtIjzdRiqiGgJMz8xrz0KawGzr1SfdWN/dYEArZ07NZknbqK
+btAqfbdyvbmiLCH2/CSkCV/+CptK/cmSfd9AzNiNfdEFYhX6qbrazCF23dYV7tJPzXLWaYR0ruFM
+DdLpauxETsbFHcz/SZpa7SXmKt0XgtVOp88RjMK47N0hR9oAgOTo3N3JYsSKfd8T3aj8QKZEiqDs
+XcOMgcXoHaei/bmqvSHcq4e0va9+Sui+7ZsmnuLRfBIWCXSCaZfQKqamKuTDHdL+82ndXSrf82wh
+gL3T7uHpSq259N3lu9yR1I2lfGrbk6ndpz3Aug3oO96vTMrZGmnF2O2mih7cWh7pzdzOSu3PjCHR
+eP3WaarPyR7kPG7g/1zrTwmVKgLOwKmmkN3ACN3nwX7v9UcNiI3vAT/wBf+OUuCCgPwsvo6CeLwo
+MGjwHf/xIT/yJX/yKb/yLf/yMT/zNZ8zQKvzPf/zQT/0RX/0Sb/0Tf/0Ub+ifGjsUr/1Xf/1YR/2
+Pf71Yr/2bf/2YZ/xCm73eb/3ff/3gT/4hV/utXD4jf/4kT/5g78FL2fmlf/5oT/6f19cR9xeSdx9
+Mrz54dxur1+Au9+Ftn97wp/+mqvfw60fw8c/9dKfrAViAsrh/eE//uV//um//u3//vE///Uf/g18
+VQojEgBCmsCBBAsaPIgwocKFDBsKjMQr4j0A9yJavIgxo8aNHDt6/AjSYwoAFp+UO4kypcqVLFu6
+fAkzpkyUEyyODIkzp86dPDUCSGHRwayhRIsaPYo0qdKlTJs6HbrE4sSKPatavRpyqkVuqrp6/Qo2
+rNixZMuaPYu2KzepFLG6ffv2psQMT+vavYvXqQObJOH6/Vv1Z1B3hAsbPow4seLFjBs7fkz4BVuq
+gCtbzqg1IrFenDt7/gw6tOjRpEubPs2Z2OTLrFnL5XVvFuTZtGvbfrw34uv+1rwtC47o4Lbw4cQb
+S5bYtrdyt5l5bUYNPbr06aZVI6e8PDvP17GLe/8+PDev3drL8/zNKzj49eyNrzYPH2Tz59Tr278/
+2jrs5PH7b+QuW3sCDkiYeOT5h2BG6O1gSoMOPghhhBJOSGGFFl6IYYMIvJdgh83Vs0uIIo5IYokm
+nohiiiquyGKI9XDYIYKvEZJhjTbeiGOGO/AVY48WoacegUKCd9x+2PkI33z4Lcmkffo1hyR8AA5J
+pXcG9hVlgkBWyaVwRUKZpXZKNklmmaU9yV+Y2k3ZZZuzXakmglu6Sad718VZ3phm7slnL2geiSdv
+bNZJKGJwBgrfnIUuGhn+jIi2pmefkjL556PKDcpooYdamh16wuQIaqiiWsiJo5xW1pwsi6zKaquu
+vgprrLLOSmuttq4qi6mn/vUaBAiMCmywoQrD467KKZopoV+maexfkU4KbX2VNlsZpsnSuSm1lyF7
+rZvLAqotVs9GSy5004YLl7Xddpktun9xuy6X37oL17jl3kvaufRepW68VLa7r1vonZJXwQYfzFRU
+dwZ8VXNxyAFxxBJPTHHFFl+MccYabwxxHLoynNNrAtCFcMkmF3xKsSALDFRElrwBc8wyz0xzzTbf
+jHPOOu8MsyYfrywffxSkRXTRRh+NFgU/Ay0SlgLQw3PUUk9N9c6WqMz+dGAtp+evt0tnvZG9+I79
+mb5gg9Rv1wQCfDZO8KpN4LxtZ8UffWTfXfbXc6vcHdxVsr23R2/73Z7cgXckNt5jm314RmkTvh7g
+jfu0dRFmXI555ppvznnnnn8OeuiiX86O3oE390gAqq/Oeuuuvw577LLPTnvtqj9i+t69cjF6777/
+DrzoRWA9eUeDQ05k7nMnrvi9jBevG5Z9Iz+g5ND/uHWQ1BeufNvMN0/u89A/vj1x1l/Py/HlD2c4
++gs7B37z4hdP/vq3nX+9+vbb1r7738c/qflNrn77ow3+oIceEsxhgQxsoAMfCMEISnCCFKygBRdo
+j+6drTlYmIYHPwj+whCKcIQkLKEJT4jCFHoQCxoE24wuCMMYynCGFyQB8dx3Ef0VcDb9Q9//ANgn
+ATaOgDvEzQ1xGBEdFtExPbzeD4G4JyEejohLZMwBi6fEKi6midB7IhTLJMXAUVGLibni5LJIRsRw
+sXhe/GKTwqg76QUojbUxY+PQA4Vg6HGPfOyjH/8IyEAKcpCELKQeR9DCrKXqCIxspCMfCclISnKS
+lKykJS/JyFy9D4e9UoIhPwnKUIqykFA4IhLRSMfCrHFybXTjkuA4tzGmskCmxCEqZ7nKxrXSlfeB
+ZdtkOUs7Hu6Wqczl4XbJS2klkmnATKUwAzewk0lzmk1RmJGQ+L7+h3Fsm9zspjc15rFNuk9kJKOm
+Oc85i5RFD5sK2trLqgbPeMoTZz4Tpw+FhrR86nOfZlGaPa8nMqjNc6AEhefV1snOHGZvlrQx5unq
+lszwLRNozaTjM/dGTDo6dG/IjKh0fHm2iqbxonPLaBo3ujyIejSAE12ZSMlI0rahJxEmqKlNb4rT
+nOp0pzztqU9/CtSaluqfXeQPC8KB1KQqdalMbapTnwrVqEp1qkhlQUtB1qs+BHWrXO2qV4GaiFq6
+Dz2eKIVZz4rWtKp1rWxtq1vfCte4mvUSV2VYc6owhbzqda987atf/wrYwAp2sITNaxXqGjDu4EOu
+jG2sYx8bV0/+iBV9ZIWsZS+L2bfSlahs5A9eCwva0Ip2tIM9LGcHKL3FZna1rLWsZBGa0CRurayt
+ra1tNYvYfd2VtLztrW8Fa9prYlOxty2ucc/62vFgKbaVPa5za7tZ4SJxt7+trnV5G1wwoY+4z+1u
+ZpN7IGyihxEgKK95z4ve9Kp3vextr3vfC9/yLiO39GqOOtKB3/zqd7/87a9//wvgAAt4wPhVB33d
+NaP4KnjBDG5wfBkx2fzN1rsUtmx0tetEz153wxwu7YHRxd0Ki1iu4F1uQps74hS79cLMuidlPtvh
+GMt4CtltMUBTq+Ics7XEscWeRWir4yDP9cPhou6Mj3zdGoP+a3w4FrKQedzj9E3YyUFm8ZI7+2Ik
+a7m6SmZniKmsYij3GD0JmIeZz4zmNKt5zWxus5vfDOc4mxkHRNZWc+yAhzzrec987rOf/wzoQAt6
+0ITOsx3qTK1epULOjG60ox8d5wREGIFTBrOKrcxOI29506Lt8nCbbOkUi5m5lQ61iDGNTU1zetUe
+Pu0QQW3qCo/6xKWOtXdRPV0Ns3rXwEV0s75s6+7Omp1khrSxj43sN9PZ1cfkTzzYAO1oS3va1K62
+ta+N7Wxre9vQjoevjaXoZIt73MeWNGxJ/eNgVxjXOFQ1r9+tV08jEdjqPu6wxVvrehuX3f7TNbz/
+bdhv74r+3vq+7b1Pme+C25bfLrYIjAEOb3lzEtYKN/iksZjwirOW4RnOMsT/LfFxUlzjrT24LbdG
+XgerfOUsb+98mf1QyqAjDTSvuc1vjvOc63znPO+5z39Oc3QI/FQJbrnRj75yCJ+b1ukm+W05XlSP
+f/zdId/uyJ3+3YufMeNYt/DQOeXuqXO66jeWimq7zlqTj5XraHcs1LHscLFT/euWInjbH6t2yrL9
+7nJ9Oyv9LfdVk53JZud71pdO7K1xgACMb7zjHw/5yEt+8pSvvOUvz/ha0P1RzXkHOj4P+tCLfvSk
+L73pT4/61Kv+8+/YPKJ69QfMy372tK/95Tmg9Tvu3fD+uIU5RwEf+E0Pnn5X5z2Jcz/M3RufrX7X
+JfCDr+Xho7bwy8c78qGp/OqntfnNljr0tyz9V1Nf+4zNu4QtogB8qH/97G+/+98P//jLf/70r7/6
+C+H6QDXHG2Dov///D4ABKIADSIAFaIAHiID95w35hyciwwr2B4ERKIETWH8KcH0YtTWOkAUbyIEd
+6IEfCIIhKIIjSIIlaIIb6AMMGCfNIQ5n4IIvCIMxKIMzSIM1aIM3iIM56ILioIJqIjLdcIJBKIRD
+SIQm6AgXWFLZR35D5nsp5X3fh2ThN0XFt4RrZX6U1nRVCFfcF3NxB4Xg14NhYndamFZXiHFZSIZt
+xYX+v/eEXyhjUihGVJiGZmWGW2cRw9AGeaiHe8iHfeiHfwiIgSiIg0iIeUgHYZglzQEPZcCIjeiI
+jwiJkSiJk0iJlWiJl8iI8ICIUdIrD1CInwiKoSiKhDgMSChTSriEa+iEXuiGRwaHcTR+c2iFpng2
+KCaLaqWK3vN8rchhrxhLcjiHdah7aHiLaJWLG7SLvJhkm4gkYyiLwph8xFiMTChd7ZaMyshlzOgj
+zhiMtAg26PEBkCCO40iO5WiO54iO6aiO68iO7SiOGKCNPdIcRlAM9WiP94iP+aiP+8iP/eiP/wiQ
+9WgE8Rgjr6EG7oiQCamQC+mOH+CNWYMe1nhlfzeTkc5XkVOYUOGFcJlmY1HHkRcZhxlpYon3kSWZ
+ah1JfCIZZeljDCngki8JkzEpkzNJkzVpkzeJkzlpk6uAkn+3CjoJlEEplENJlC7JkyAZR0WplEvJ
+lEFpDCMpXgAglVNJlVVplVeJlVmplVvJlV3ZlUiZUl4plmNJlmVpllUJlr90lmvJlm1plisJl3Ep
+l3O5NwEBADs=
diff --git a/Documentation/DocBook/media/fieldseq_tb.gif.b64 b/Documentation/DocBook/media/fieldseq_tb.gif.b64
new file mode 100644
index 00000000000..7b4c1766b40
--- /dev/null
+++ b/Documentation/DocBook/media/fieldseq_tb.gif.b64
@@ -0,0 +1,445 @@
+R0lGODlhdQKaAucAAAAAAElJDK+vr1YMDBUVZC8kDQAAVkYQEBcHOwYGSCEJHSAgaKOjoys8DDMz
+CgAYGp+fn19fFJmZmQoKO10wMA0VIAAAcDsICCsMDAcMT1MMD2ZmAAcSO29ISFUHByIAGoiIAA4H
+T0pKDJaFhXd3d0EgABoaVGYyAC4AKXd3ODs7BwAAN1MAKQAAYlZGB2JlDBwcWWBtYCA3ABAQTQAA
+ZQ0VQD4AAFVVVUhjSCQMJQAAfBMHMkQgIEtLSzAyDD5VPmZmDEZRB2FhEWZiDFo2ETkdCwAAVEUt
+Gu7u7js7Ozc3N3d3WACPADU1NTMzMyBRIDgAAEJCEHEAAEwNDZeXAABpAEQFBSMjIxgNQDooCBA9
+EEhIbwBVAAw/DAwMPgBNAENDCgc9B8zMzABDAD4MDAwOKjwKCkQWKUscHAAAcUtLFRMTEwohCoqK
+AA0NTBEREQgfCBUqIgApADIAAA4ULzg+DEEfH3wAAAcHSaqqqlkcHDgMDKSkpFQAABUVRjEwCGZm
+B00QEDAwXSUMJGUAAJaWlhQUUnx8jVQaGgcGLggSGy8GBmw4OGNAL4qKioiIiGIAAEsHB3JYWHd3
+AAAAPlctLYQyAGggIBgAGkIVFQwcJRgYSA8MU9EAAAcHVQAALRoaYbu7AEY1H2ZmZlxdEHAAAD82
+DlhqWExGHgwOUzMzDAAAmgA5KTEHB2ZmPlpaB///////ACISRExUDTJPJUQrDAwMVhISSEhISHd3
+IC4xCjhcOA4ORERERBkVXElJAG5gYFhYcnt1ZkgGBlYAAAUFMTg4ODo3BTJrAFESEmZmMF5jBwoG
+Q1paDUkKChxGHN3d3RwYRGZmHCgoKFMAACYmJi4YLhQ+FCIiIhU0FT0AKR4eHmVeBw04DRAsEAwu
+DAc2BwoqCgAAPFdMDQAA0WAqKgwiDEgZGRkQRAckBxsTPDEwDBAQEDwAAEJGDAAAU0FBQEJCDLu7
+u2IYGJoAABgYRjg4bAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAALAALAAAAAB1ApoC
+AAj+AGEJHEiwoMGDCBMqXMiwocOHECNKnEixosWLGDNq3Mixo8ePIEOKHEmypMmTKFOqXMmypcuX
+MGOelAegpk0AJFrSrLhTpYQ3AHoeDFpQqMCfQQHIXEh0olGBYkZtpGkTW56B0EYBfTMKCUEJEqja
+7DpQDIAbBJsOJHF1qdu3cOOqVKtTKcWnEOnmlQALWk6Eep8C4Ou3YWC7JUlAg9VUL0K8vcRMRUwC
+gFdoXBdD6+WE4A0kQqE5kSqwsuWBepFg8yq3tevXsPPKg4n3YW2HjnHPZrp7oODehoHDui2ysfDH
+iKFi42iU6A20A5G84SsQrdE8iKdPR3181KPY4MP+NySBC4L4lHRJAI0MSwwJ0++B5nSvHqdAJPVv
+LHb/U54YJzX99RR+QOnX3ntKidELANiMYlce2DB4FX9vHMdYTfIQeNZ+8dlHkFg9QSihQEQpyKCD
+H9q0E4X+AfhGTir6ZhMskWGTU33Y8EWffFC5OB+CONX3V1BixVgfe7DgWFlB7621nmRMAjBdLwk1
+Bw0SAEBZ1mKw5PHddQ9aNgp0jB0nQWfnpanmDTVNU56aI6lFghOLkbAcTVJh9xl28uCJBDQ2Jkkn
+EqN0Js8bvWTYy3dmzfbUnFcWOhxXsznxmWhKHeooANAcmihrBhEFKaGGAtAVoH9xN1ymFa66GFH+
+lv4JYEFE7eRphi/21ephJDqRR6fY1MlqnlnCkitmfZra5VlI8Fnms89CmuRy6jkKVEGLlkbntEwG
+CwuKyK2VE3HfLhaapQKNuSxrjpkF50Sg9SnvvPTWa++9+Oar77789lsvPDcBsE0Tqb67kVpWDVSh
+UMbRxKUEy23XV5YOFwRNrckZS93FYlRs1sNKjZLqDSRUnBBREnNsMsS0bvrtyDD6x+lRGWPsqkCZ
+pSVcT4MZtCRN7M6Ws0AM70bU0UbPljDO8uQ4kAQ177a0scA5TWKVAQ8mVJECUbnqTZ/h3NYb30Hb
+ssEQFZn12my37fbbcMct99xxo62RWlknq2r+mVsrhbfeRzmBDZsu68xdT33TGHDJGYc629+JG77T
+gjfFHLmqtiKWFTZv3CAZr9CKcQOiC66q6uadd4yYcc+ynrdav5EYMHAIYx2dVljunGnZtWF3E5q5
+5Wb3QfH6a/zxyCev/LwAB3xFEoUMnxHCuu9N5Myw/KSxQCrbZRaUNhOUMsV2XQzyy0U1fvb4qj/8
+xtk7iey4+TTDn2njBJpNtF1N5Wp60QQhEABb97ikwQIbwrFa9qImEAQmRGKMsZ2MaESmdCmFBFCq
+zShIs6xXWUh40gthStgEAHZYSksitIictvWIN4BmdUnzE6oEFalSQaVYjwDAVR41KEkJpRf+l5qV
+piYFuOEUjESzGZUPTfWnQEmOVdYqIAVlxcDMKewvdtKf6aBFtr4s6IWq8p+dBog0xrRFVCx0YbWG
+EyFslU1aLfRKyaa1GHDNMUW3QwtmDOSXa3ltiwF8Q1tw9p12qS+FiCxJoTyXyOkBpz5OkAwZk1Uf
+smgobEI5UmUeMaD8eEUoSFjQlI4SIadlsnEAEsMlP4kToJDliaRkEHWIEkopSeCPSPwfYvIAoLNI
+JpUEwcz7mgIxBqmnQjDsUi89N8lniRIWwIQklKSJyyRxUJokygmhbMm/I6otbH3RijFp5J4JFkR7
+BJFU3rJXwUa6UySgemddxHPEhZBLnij+AVRDVEm097XmBtTBp0AHOrx7ukUeZXOIQQk6klFYqCBj
+QgISbsBBuOiToRjNaHgWCieOarQjhVnIRGsCzriE5aMoTalKV8rSlrr0pTCNqUxnStOa2vSmOM2p
+TnfK05769KdADapQh0rUohr1qEhNqlKXipARSOKpUI2qVKdK1apa9apYzapWocolgxwiGGANq1jH
+StaymvWsaE2rWtca1oTE4BRwjatc50rXutr1rnjNq173CtcYJEQYSwisYAdL2MIa9rCITaxiF8vY
+wAojIVuNrGQnS9mtAgMh0GCrZjfL2c6y9RAOYUQnRkva0pr2tKhNrWpXy9rWuna09Hj+6ALIQdva
+2va2uM2tbnfL29769re0bUFCnsCE4hr3uMhNrnKXy9zmOve50C3uExKSi1hY97rYza52t8vd7nr3
+u+ANr3VzkRBIvPa86E2vel17icesArjwja985/vbBYR2vfjNr35ZG1uEzJa+AA6wgHkrXIQQN7oI
+TrCCF/zc6SKkuuKNsIQnTGHwkhch5t2vhjeM3/YeRB7vHbCIRwxg+zZEtBxOsYr5K1sSu/jFvi3w
+QQ7M4Brb+MbMdfBBIFzhHvv4x9298EEyvOIiG7kTHjYIiGHM5CbX1sQMQfGRp8zh/h7kv07OMoll
+bBAa4/jLYF6wjg3CYyCb+cwUFrL+QYhM5TbnN8lFCbGW5yxgKC/EDlPIs573zOc++/nPgA60oAdN
+aD3zASF+cIOiF83oRjv60ZCOtKQnTelKK9oLCfFGNzbN6U57+tOgDrWoR03qUpt6095ISBSawepW
+u/rVsI61rGdN61rb+tasjkJCzFDoXvv618Am9B4QwgdLG/vYyE62pf1wXzc7e71WNgiW6Uxt+XK5
+IF4Os7a3vdwxF6TMaA63uLmr5oKw+dnobi2cPyTnaru7vs1Ot7xXG+2CTPvd+NbttQmSbW77m9ve
+Jgi4x03wcZebIOeet8JJu27ftDvfELetnRUi5YVbvBP1Jsi9Ix7xfQ+k3/8O+Zf+Az6QgRf85GY+
++EASfnF5N5xoD+c4xCeekIq3fN4ZH8jGZY5vjwsE5CIPOoNJLhCTo/zoFVa5QFh+82e/fDgx5/m7
+aY4QHgzg6ljPuta3zvWue/3rYA+72K/uDAYgpB5eSLva1872trv97XCPu9znTve0JyIh5uiC3vfO
+9777/e+AD7zgB0/4wuvdHAlRBRAWz/jGO/7xkI+85CdP+cpbfvGqSEgrxs75znv+82LHAEIYMIG6
+m/70qE893esR76bLO+cC2bnUq+1zWABd6LiPLtFhYXSk+168SocF013f5qcvefYzbz3xnw17WMge
++XOu/e1zT/0cU/f32E9zeZf+73L3Qj/fVD+Izbnf5uY///tOln7116/762f//eEN/vDJX2TjRx39
+WQ6/QcpBj/77//8AGIACOIAEWIAGeIAI2H+lIAAIYQJp8IAQGIESOIEUWIEWeIEYmIEa+ICUkBDZ
+8AUgGIIiOIIkWIImeIIomIIquIIgmA0JoQZtEIMyOIM0WIM2eIM4mIM6uIM8GINqkBB9kIBCOIRE
+WIQImAwIIQDvsIFM2IRO+IQaaAIOUQlSUIVWeIVYmIVauIVc2IVe+IVgWIXUwIAHAQqrcIZomIZq
+uIZs2IZu+IZwGIdyeIZGkBDXUAV4mId6uId82Id++IeAGIiCOIh4eA0JEQH+oZCIiriIjNiIjviI
+kBiJkjiJlJiIEZAQNhCGmriJnNiJYJgJSWgBcziKpFiKpiiHoKB89Ddl5od/7qZ+7BeL1vdg8FeL
+3iV/q+hs9ueK1aZ/BTF+uVhkrciLdAaLsniMx7V7vWeL8IeLwUhlu0iMc+aLBAGMz5hiwyiNWWaM
+yIiMysiM4IhdzniNRhaN2uhk1DgQaBAJ7NiO7viO8BiP8jiP9FiP9niP7DgMZncQt+AJ/viPABmQ
+AjmQBFmQBnmQCJmQ/lgMCREO4PCQEBmREjmRFFmRFnmRGJmRGvmQ4ZAQYPAKIBmSIjmSJFmSJnmS
+KJmSKrmSIAkGCWEF+Bj+kzI5kzR5j8N2EAyQAAq5kzzZkz6ZkLegiuRYZS12juk3XN2YlN8YjuE4
+jkOpYuZolDCWjgJhjU+pX9kolS/GjUkZi0vJlMzolFe5YVGplSRGlbBglWMJbUVpli7GlV25fl8J
+lrUolmupX2XplgOGlmp5l+iVlXo5YHAZl9Q3l3T5fnbpl+uVl4FZYg6RCTUZmZI5mfZ4aAcxAz+Z
+mZq5mQeZAAnxDWEQmqI5mqRZmqZ5mqiZmqq5mqwZmt+QECIACLI5m7RZm7Z5m7iZm7q5m7zZm7Ip
+AglxAZQ5nMQpmTdpEHzAmcq5nJs5A0KpmOkFmI0JYINJmLhnmIeJfYn+CZ3oxZjTKV98yZ1Y2Zbf
+SZ1IaZ3sh53Z6XvbKZ7s5X3lGWDh6Z5s6V/xGWDViZ4ip57reXTtSZ+r5Z336VvzCaB/SZ4DCl/5
+qZ//xp/9eXL/aaCoJaAJultoeQ6QkKEauqEc2qEe+qEgGqIiOqIkmqF9sI8GwQvisKIs2qIu+qIw
+GqMyOqM0WqM2uqKfkBDpMAY82qM++qNAGqRCOqREWqRGeqQ8mg4JoQKT0KRO+qRQGqVSOqVUWqVW
+eqVY2qQqkBBQUKJe+qVgGqYk2gqjtwI3eqZomqZqaqO88JwSmlrSWaG9taAMCnDu96C/F6FvWloU
+Kqe4VaB7ymL26af+wEWndaptDoqnBrd9gapu8EmoBOqmjUpacQqpuGWohwpmiaqo4aanjdqnlkoO
+FyqmpFqqpiqiJ4oQKrqmrNqqrjqjOYoQcCAHtFqrtnqruJqrurqrvNqrvvqrtAoHCfEHv1Csxnqs
+yJqsyrqszNqszvqs0Fqsf8Clp1qt1lqqZIqTZvqq3NqtrNqmJzapgnploTqn55mpQbepnHpmnhqo
+oGqpgCqup1Wp5Rpc54quIaeu6wpk7bqn7wqp8SqvpUWv9Yqp+Gpj+rqvPtavb/qvhBqwAgtbCFqv
+tmWwBzt0d6qwBMewEuqwfoqWHXAJIjuyJFuyJnuyKJuyKruyLNv+siOLQgRhDwswszRbszZ7szib
+szq7szzbsz47szCQELTwBERbtEZ7tEibtEq7tEzbtE77tERLCwmhDLlQtVZ7tVibtVq7tVzbtV77
+tWBbtcqQEHrgsmZ7tmibti1LAQghBj/7tnAbt3L7s/bAVHZ7t3ibt3q7t3zbt377t4AbuII7uIRb
+uIZ7uIibuIq7uIzbuI77uJAbuZI7uZRbuZb7UhCUPf50HwJySIYRMFTCM6ALSDJSFYPkM2szG4Sy
+Fa90ITZRUpcbu7KLESRQQRRFEEtCulBBQrB7NumTS78bvJp7uh+WHHukGaPDJU0hGu00u877vPt0
+GrCAJYOUB9f+orsH1BVI4ATVZDjB6xh4YRRZpBBGAUQF8RzAuyzQu77sqxBWY71YkSN2ARmsQRzg
+yz/HEb7Giz3hch/FQhBm4RVqgR3tW8AGnCTQIT9dw0nz67ncAhj5i79K1jixI0HYS0Dcgy4HvMHP
+G8DGMk3W0cAIIUAnEzD7IzuVg70V3L8XfDQ30QvxxMEybLlOIAEQ0k+sdMIG0UK90FVDEcHpa054
+hBX8W7zR8b9lcRogNMNMLLmPQFFYlDd4MUYMcb9BrMNDXBrLQb7JYb6eAR1L3MRi3LgXgw0wu0UD
+gsQKYcVapMKI8RPEO8HB1DnI+wbK+1BjnMeMKzhG/DU2kSj+WXMyQOy6N+HHNRG6NzE1Fnwf4jQ0
+bazHkBzJkjzJlFzJlnzJNEUCvbDJnIwkInFLnbzJAYXJpFzKpnzKqJzKqrzKrNzKrvzKsBzLsjzL
+tFzLtnzLGhHKurzLvNzLvvzLwBzMwuzLo8xSCjLMyJzMyrzMy3zGKnXMzBzN0jzNyXxTDELN2JzN
+2uwhLkUT3KvN4BzOyAwgePxR3izO6JzOvNxGNsXNLuXOLEUT5axR8gxT9fxSuVtT8MxS+6xS99zN
+YZxR/9xS+UxT/axSB41SAx3PAY1RC71SBT1T3CwMjFDRFn3RGJ3RGr3RHN3RHv3RIG3RXZXQ5qwW
+OLALKJ3+0iq90izd0i790jAd0zI90yiNAzIyzwKtFiG90zzd0z4d0h2wFg7cUtzcl5MabSRNz2ox
+fRd7Yzr20P6sFvMnrkkW0TJV1BGLWkhdT1HdG0zd1DX21A3NUP881ZNa1UPNz6li1I261fa81GDt
+b2KN0w4t1Vl9WmhtzWt916bl1i/1z18d1wo212/dG2b9qUKt1+pYnIzd2Paoj6jB1Sn1z2zQmpZ9
+2Zid2azJBjdd2AMBk44d2qLNjsdp1TGF1XxNqb2R1Dnt1YK9bYT913ad2qOV1+2817SNcast2QoN
+168dZrEN0Iad20iW2Lc9EGwdqH4t3B/328Dd2bI93Ln+bdv6nCpU6InYnd3a3YVjGNmeLRAfyILi
+Pd7kXd4q6IL7Q9dkrRaZuN3u/d7YDYqlkdYrxc38Z4T4nd/6XYAL6N3RPRBaQIgCPuAEXuCDqAXQ
+zdwCEYT73eAOjt9ION+KXZXEvdwtBdjOrakJfuGzTdvUbdC4TdsWztCuneE4FtwcLt0ebtzVjdwV
+vtvfbXsmfuIbTuIrR9wfLtGpgqHX2uM+jqooytp13RuzCqxGfuRInuS+KqzpHeNd+uNQHuUZmq1J
+Qt8IHeKpPeIrheEzjrA1vuUdnto5ftVYztda3tXN3eVh/eVovnQ4zuIg7uK5feaT7dtqLmZsXucq
+Lub+cK7jci7iMP7fP3fnGNvkgi58by7hxy0QeBZsjv7okC5olskYvF3SvaFpp5bpmr7pnF5qqWbo
+Cg4LvBbppF7qjl7aVp5SqA3o/h3qgU3oyIXiNu7m093nZP7nWR7org7rg53nvb3nfD3mp13md03n
+v57mvN5+oJ7iN17rit7iFD7nus7sg57syr4q6k1QZZ3oVT7hsMADZBDu4j7u5F7u5n7u6J7u6r7u
+7B7uZhDkla7UvZF3hlfv9n7v+E54iLfssw4Li9DuAB/wAj/w7C56zx7n0c7q2RTjr27tsg7mwH7X
+wg5Tq57rrU7tMm7t0PXwbY7ozt7ti56WL37x/d7+8MnO8Xre7Ct+8H4uENcN3zAf89xNhpQe4+Ft
+3jif8zp/guiN7THe3jIf9EIvBfIN8tAOC/f94Eq/9PxN80K+3r1xhwY+9VRf9YBoiPwO8QPB4Ezf
+9V5PDxFu9Agv8tJO8lpf7RrvXCh/7LS+8mLf8mSv8DV/6CbP62tv6SrP5yx/6wlv8QtP92nfYL6O
+922v92/P998Oeoq/+IwPdmVn9h1vDt8w+ZRf+ZZ/+Zif+Zq/+Zzf+Z4/+fvu84e+eY1f+qav+AZ/
++MOO62Y+7SUf+Go/+PKe98Fu66vf960P+SmP9rCvXHc/+4Vf+3t/+3Hv93O/673fbbLf2rQv8bb+
+T/HEntXGTvgZn/zJ9fvMH/zOP/zQPxCS8NPgH/7i/9Fa8vTarhY/QNPqv/7s3/4z/QPLP+QDQQHj
+X//2L/7P/1LmT1D7L1BQvfsAAUvgQIIFDR5EmFDhQoYNEcoDIM/hRIoVLV4USAIARo4dPXYEQOLj
+SJIlQ5ZEmbIiRIkqXb48yBLmzJkyad5MqRHnTpgnef4EKRLo0JURiR51aBPp0odGmT4tqBPqVIQA
+epHAmlXrVq5dvX4FG1bs2LA+qT6FOIrsWrZt3b7FOsrpWaZp4d7Fm3dtr410/QIAHFjwYMKFDR9G
+nFjxYsZC/SKFyFjyZMqVLQ9u+fho5MudPX/+pqxZ9GjSpU2fRp1a9WrWrV2/hh1b9mzatW3fxp1b
+927evX3/Bh5c+HDixY0fR55c+XLmzZ0/hx5d+nTq1a1fx55d+3buFN9IICjhDUEkQiFyJNwL1nlY
+6df3JcgZALY8Cgc7yQxt1Jv5JJC8J+yGwoSSwAnAnABPoPkKkiuz7h6EMEKKSLiBoBtGIUgq9ggS
+Q0AAbvivKgcFYm+ugTY8ET7x6hNRICT2+w+aN0aBBhYxnHCiIBMVdHAUJ1jMwwkM2wNADIL4G1FC
+JZdUUgwAQkQCABZhyYM/EuEbCJtRkEDCCfVaLKjEJFG8MkNsEporSol6qXAgJLBxrL0k55L+AJsQ
+XfyuPSccC3JHJv8EVDtsEqxyIGgG7YtMWHoJUdGB/BTTIEVRhAaAGg9K8w0uiyzokRwfnTMzJx4x
+iIQcAXjkTIFGecTPQF+FFToKV3Wsl0fYc3QgElTFdMy+IMWyTIJcldPFUeqbFEs/5wJWTmyMhOWN
+SpOMtVprj3PyvzegnRXXYN0k4Q1qFRxMWMJESlbHcd1LF1SDmPVVTqyoPHXca+/FtzcE81BVHk3f
+E7bTN3q5FMz4fo03TCwrLVjdgVoVI0poH/6Ux3dFJbXTesU4k9Vi8wU55N0euVAojTBTdFd73VXY
+4pZfzojXi4dds00X4aR5ZoHEuxMWJPL+NOpZaT8WuWijY6v0WUkTDVbihpolOsWlB1oRzcweGQ8W
+GWm0EUeHv171R4GCHNIoUz8l9mi11x7NCZmlBjCwXuQDzOqpiSyXbvXko88+wZyYWD/+4Ow5apep
+NhCAUd11MuO02YY8csknp7xyyy/HPPNYSeilc897mRgmCT73PEHNT0c9ddVXZ71111+HPXbZZ6e9
+dttvxz133XeHXB7ffwc+eOGHJ754449HPnnlC08OCeWfhz566acXnnnkoKE+e+23n7460L4HP/zA
+ViaObvHPR38x8oc7OX333y/M+1G4p7/++ltdXziIbrW/f/+hx59zNPI/AhaweHLxXpz+lKOU5TBw
+gY8jjlSaI0HpmKWBEByOA5OjQeRQcDkehI4FH5i/4HDwOCY0DgiTo0LnmEUQC4BhDGU4QxrW0IY3
+xGEOdbhDGNYgRSQEjlJQkQsiFtGIR0RiEpW4RCY20YlPJCIqfihA+MgDBjzEYha1uMUdCkJX33qO
+WRZADjKW0YxnRGMa1bhGNrbRjW8kYwum2Byl5CIWd8RjHvW4Rz720Y9/BGQgBXnHXMyRORKUxyrg
+uEhGNtKRb1zAFxM4kDE+0pKXxCQb5XglIP6mjoMEZShFOUpBFpKTVDyRIjO5SlZaMpIZAWMLHVPJ
+VtbSlpo05AUzY0dS9tKXv/yjKd/+00nfIFKVt0RmMsnxSliwsDlmMUEapDlNalbTmtfEZja1uU1u
+dlOalMjlCAeihjaU05znRGc61blOdrbTne+EZznVEM4VwkcA7/BmPvW5T3520wSSpI5ZQLEKghbU
+oAdFaEIVulCGNtShDyWoEeiJHKVEIBQXxWhGNbpRjnbUox8FaUhFetEITPQ4EhSABSC6Upa21KUP
+BQVApyNGZdbUlpscpnM+CUye9rSXwkRhcYxpU6KukpnOZA5Ni7rUR+I0qOWbCy99OlWqBtOkKazi
+MZm6VUjKtIKz5GpY3ehUDOovqlVFa1rxCNSyBmeoYoVrGo8ay2c65haewGte9br+V7721a9/BWxg
+BTtYvBbjqsVRChhesVjGNtaxj4VsZCU7WcpW1rKLBcNhIwgfBiSAsJ8FbWhFO9hbeDU6So1rauOo
+2QyeVa2vnSpbidmbt6o2tXOdpEBoaVu4knW2vNkpbIX7S9mikkRa5W1YcRtQsCa3t6w16y6HO92f
+QtetWXUuXJc70+Zml6u+1alrqTveQRZ3gtj1Lle3+9WBzGC074VvfAObAOsGcS4iAER+9btf/vbX
+v/8FcIAFPGAC51cE9f2NBPkgXwY3OL4zMG0Iu5vepYKXjuIlb4b9aN5DopfCS13vaSf8YZtamDnB
+1XCK9cjhD3qYxDYNsYQp+eL+oppYlwORqop1HAsWK6e2NFZmjMM4YiDf0sbiFEiOd5ziHtczlUWu
+qZBlORBeiMPKV8ZylrW8ZS532ctfBnOYrfwJBPtGKSqYRJrVvGY2t9nNb4ZznOU8ZzqnWQVlpi1n
+VyBmPvfZz38OMy8iPOQZQzmZR94ghpes4SZ30MWGrqWU61poSN8Uz8BV9KLJ2+iTPrrSRh30lHX7
+aUuf8sLS1TSTL72bH5M6k5JOqmOqDGha19rWXiazqU88lz/8wte/BnawhT1sYhfb2MdGdrJ9/YdV
+60aCDNjzraU9bVoLGpa5hcVuXY1JRFM006meLqex+uRtg/razKV0uS/Z7RP+fhvcwhW3UD2t7kbC
+ejmopXdTm50bFL873PvGTavzzUh7KwffA2cku43Tb3/DG+C3ETjCu3pu7rbXwRfHuGDpq+sbCyQe
+lwV5yEU+csvG4+G2UXDGVb5yvUKY4uwdtcQbqXDEurvhaY33Zskt80UWPDkH53kbaQ5VVN98uDln
+37yDrkafIwfoS1fj0FtbdKPDFunCiTjU0dj04zxd62eUenRxXPWjn7w2Wf96GbluHLNswhZvh3vc
+5T53utfd7nfHe971/nbDchzJsFAFEAQ/eMIX3vCHR3ziFb94xjde8KowO22ejYe9V97yl8e83jcR
+6knHPO1Rj/xsGE72ql7+/bo7//zWOR/rdKfejGEvoc1J31PTAwftn197cbyeetjbl+qzL33oZXP7
+tOeeOGJ8afKVv/yGStTvic6MNEY6fepX3/oilYbwY4NIlTLf+99PvvGHYxYxGND89tM+bJRyfvZz
+L/2vkaDz2j9/6U0MqfdWIPTD+9vdPDXpz7k/g8s/b+M/3fA/sTsvAKQr1ju1/XPABDSumYKfCZzA
+AuQ3CsRA97HAgMvADhSf6tCLEBTBEcyKhlEOaCDBFFRBtzDBDVrBF4TBr+CdGaTBGrTBG8TBHNTB
+HeTBHvTBHwTCIBTCISTCIjTCI0TCJFTCJeSOPKGarHER81jAhWCXXxn+jL35Fr6ZkoRwEpuJGvMJ
+CfNBl/tgEas4GAvhFHK5QryRGyZ0Q9OYlYG4kAxhGoPoEMAAEbt5Gag5w515gy08iJO5E2KZC0dB
+kXD5D8DIGIBxEcDIPxNpqzeUxKfIlkackiqpw4LQEi7xEj3sQz6Em5hZiO9wQsNhGUaEGYuxin9B
+xVRJFZ05nEmURc0YlLGBwkORgEwkCEYJGFiEG1DsRYZJiDx4klGwGULMDEMMFkuREydokw3Zk0oJ
+naiJxFm0xp+IQ7UYCFvxFoXYFU/8xYTpw1M0CGOkkieJxZzpxVBsJseRBydBlr6QRljYE7AxxWvE
+R6SoxG3JiArpxoP+KA9xQZNyYcRzQUV2vEeB+EOFdEeDMR+JoBsnNBtNYQ9PEQissUeDzMeNHIp9
+6Zd/+UeBIRj7SBhgPEhhPAhi/Jt0PEVlJIhRUBWnEBL2SJzA2EJI3ECO1EmOIBltbCbC8J1vURmG
+gBqTPMS3eckhOccaQUaE7MVIsZGQ2AiUpEelpMac3MmspIikmUZGJBOnIcqSFMdQrBqAXMiBeANS
+acp1fEqE+aKNMBWCwEhyrEattEuOcJuYYBrBmBvCAEdz8Uu9iZv5AMTwgMKwYcO6ackqJIhKqQ8T
+MRBYwIZF1BopoUu/vMvM1MzN5MzO9Ewe5BzSAZ2bGB3RNJ3PRM3+1FTN1WTN1nTN14TN2JTN2aTN
+2jwd0cTN3NTN3eTN3vTN3/zNNZgG4CTO4jTO4yROJVgDJUDO5nTO5wRO5WRO6KTO6qRO6bTO7NTO
+4pyGNdjO7wRP3hwWbAjP8jRPAGAH81TP7awGAKiG9YTP6mzP94zP+mzO+bTP/DROdrAK/fTP38QG
+ZRlApzMG53AEAHAEA0VQBU3Q5jCGKdS5RxnQrivQ5jjQBmWOC2VQ53hQBRyWCWW7Cs3QBbVQEh1R
+DF2ODo3A9nCMEZCEF4XRGJXRGaXRGrXRG8XRHNVRGC0YABDRQwiGIBXSISXSIjXSI0XSJFXSJWVS
+IR0IDRWIGDj+hSml0iq10ivF0izV0i3l0i710imNgSc1UWFYgjI10zNF0zRV0zVl0zZ10zeF0zIV
+BjHF0B210zvF0zzdUWAYCBXVmiYF1EAV1EFt0kPwKrNghE5Q1EVl1EZ11EeF1EiV1Eml1EpVVHrI
+DB9tPddbLYGAUlh4AiYQ1VEl1VI11VNF1VRV1VVl1VYV1Seg07EDPpyLVYGABEvF1VzV1V2t1Evo
+U6VLvfVCVF4l1mI11knF1EcRUW3jVHLAqU8NVVeV1mml1mplVVj1VBNVsln1KWH61Fs91nAVV2L1
+VYHw00Rq1jMSVsdI1HF113dF1kxd1nR9vVoFVWvF13zV11X+xVZY+NRt5Vae8lYTBVd4NdiD7YRy
+hYVzRa5mXdeBaFeEldhxTVYFmVd67VR/NdFo3deO9Vhr7dd/Ddjgy1YMLdiJRdliVViGxVgyeliB
+sIMpkNmZpdmatdmbxdmc1dmd5dmenVk+UNaB8AM3INqiNdqjRdqkVdqlZdqmddqnJVovsFdv6Iaq
+tdqrxdqs1dqt5dqu9dqvBduq9QZ7jYJmMNuzRdu0Vdu1Zdu2ddu3hdu4NdsosFcz8Nm7xdu81due
+3YNfHQg+gNrAFdzBJVyo9YNDZdeUVVxirdj2uFiMfdaN/djJpdxrtVeAHVlfGliTXdzOzdWVBVbc
+Q1yI9dz+0qXUxtVUz6PXyMVQjq3c14XdkNXWzI0tez1Z08VdRgVd1EvXl4WFiM3d4O0E1H3c1bVX
+14Xd5P1Y2cVQzKXdUdrcgbhd4TXd3T2ull2m0RUI4KVe0yXeTeVU1h0I5FXe8s1X5pXV5wWm6LXV
+7g1e612PhuVU3+WBAbDf+8Xf/NXf/eXf/vXf/wXgALZfZ2CAoBWIevCCBFbgBWbgBnbgB4bgCJbg
+CabgBE4EezWHLtDgDebgDvbgDwbhEBbhESbhEtZgc7DXwHO8FWbhFnZhxoO8kh2IVhDgGrbhG8bh
+AMYAvxUIBpiACgbiIBbiIabgetDe33Xf3P1e1U1X8RX+CPI13yieVvRNMvUVWNtNYtyFX3RtWd/l
+3ixW3CXONux14nuV4jOmViqGBee14vLCYjD23C2WX9fzYjj2XDFm1vA9XjTmY1dVYzZu40BiX1iY
+XjuWWDnGXt8tB3pg5EZ25EeG5EiW5Emm5Eq25Etm5FIQAAOGhWjqp08G5VDWJnCSYYHIhi9A5VRW
+5VVm5VZ25VeG5ViW5VlG5WywV3KKp1zW5V3m5Xeap1KGhT7A5GEm5mI25ktOBh6GhXsS5WZ2ZlD+
+p5czi0qQgmq25mvG5mzW5m3m5m725m8G52qmhk222IEYKPBD53RuPnu9hipw53eG53iW53mm53q2
+53v+xud8dudrsFeLur5/BuiA/qiSAmYbCOeDRuiEVmhwzgRlTil1huiILqiYkubENeQwllfwdb0y
+huI+9uhR/eNA1tw3vmiUReQuPuIvLmmDxWMy3uOPhulSDWmRJqVBLuSVfteTxtg6xmmJbemW5eiY
+FupXvVyarmmS7mmD1Wl6pV8ycOqnhuqoluqppuqqtuqrxuqsdmozKOByFgi3y7ywFuuxvru+01gM
+NYdvUOu1Zuu2duu3huu4luu5puu6VmsUBuZ1CIC95uu+9uu/BuzAFuzBJuzCNuy9Xgd7XQStZuzG
+duzHzuodNlfOojyytuzLDuvNq2jSTeqD/WnIfen+oYbpmTbqULLpzj7Ype7dlEZtls5oJm7WoBbt
+0S7q0jZtpG5tcVVth2Xt3HbXzzZeYO7o2Y5i0rbtUsJt3zbW3Z7f3lbucAXuJg5t4uZj4z5uQDrt
+5w5X5qbjI86ESADv8Bbv8Sbv8jbv80bv9Fbv9Q5voPVqWHAvlpPvi9u4sx6IbwiD/Nbv/ebv/vbv
+/wbwABfwASfw/P4Ge8WvAlPwBWfwBh+wAwPmC2DvCafwCrfw9e7byf7b+ebwBnO5n/xQztZuY43u
+2J5u6j5j677uDUvuEddV7g5W53ZxXi1xPRZuFO9jFV9xPsruGedVGBfdzd5eH2fc1x5joD5xHDf+
+Xx3f8RVrcSKnVCAvPhmHckut8Y1OciVXXiZv8rV68iqPVCn/Ot89B0gw8zNH8zRX8zVn8zZ38zeH
+8zg38z7oaselMmrD8zwHs1yzb4FIhzEA9EAX9EEn9EI39ENH9ERX9EUH9HSwVzSrs0iX9Emn9Dm7
+M2CGAjnX9E3n9E6P81ZQZmjT81En9SuzNhCXUBEH80q9ct7Lci2P3dru8j7q8VWPcmXm4p2mcluP
+1Fb/PNmG9SWX9Vnfo1rn9TDH9TmOcSFH4mOPV07OYyy/8WAXdmAG5CY3dmd3VDHXOkU+5m8H93Cv
+ZE3mZALQgXNH93RX93Vn93Z393eH93iX93P+NwB71QIuwPd81/d95/d+9/d/B/iAF/iBx3ctsFch
+oIKEV/iFZ/iGd/iHh/iIl/iJp/iEFwJ7FWZx1/iN//Zk1nCBEAAamPeRJ/mSN3l5J4AjpuaFZvmW
+d/luHmdOPmeJpnnwc74+h4V21ued5/me93l85mdg9meBJvqivz6CxnmDfvmlZ3qWb+iPX+buq/mp
+Xz6KRnUFsWhth1RfTztgp/bk5fJZz3atX1RuhzqeJntH5fqv8/qvf92w7/KxT3uzXzq0T3tGXXut
+a3u3p1y4x/Yv13q6Dzrf7YBLMPzDR/zEV/zFZ/zGd/zHh/zIP/yJSV1YsAcuwvzM1/wcggH+e6WF
+JwD90Bf90Sf90jf900f91Ff91Qd9WrBXZYCi2Jf92af9J1IGe9UDydf93ef93o98ClBmMdj84Sd+
+zbeHI04qEV2OT11+E21+FFUOP+2wEG8h5VcO5r9+589+6E8O6W8x6n8m608O7B9/7S9/7kcO7/cx
+ZbmKGHT/F+yP95f/EewBAOiB+cd/vaj/+8///n+L/QcIEgIHEixo8CDChAoXMmyoEBsAhxInUqxo
+cWAvALA2wgLg8SPIkCJHkixp8iTKlCpXsmzp8iXMmDJn0qxp8ybOnDp38uzpUyfHoEKHEi1q9CjS
+pEqXMm3q9CnUqFKnUq1q9SrWrFq3cu3+6vUr2LBix5Ita/Ys2rRq17Jt6/Yt3Lhy59Kta/cu3rx6
+9/Lt6/cv4MCCBxMubPgw4sSKFzNu7Pgx5MiSJ1OubPky5syaN3Pu7Pkz6NCiR5Mubfo06tSqV7Nu
+7fo17NiyyyKRAKsXUtxGe/Ui4URMbjG6gw6/Pfs48uSbSeDGDc1Jr99Ciw9trpQ6x+LYlXPv7t3v
+I9t5SMAab11CHljQqPfmDc34bWjYSMyH5lu6QNuw6NuHJcGJE7bhlgd02Gy03XcJKrigWtDcAMso
+0CBhXXHjTScPLPKMAh+FsIjx4HO3AZedcU4gAQs2E8JiIhJvMPgijDGWZd0N71nn4Q3+5E1Hom4d
+StAbCRqxF9989MlzI4IyKrkkk009MoqAvL3xY4ajnFgdhhqu6GGHYpBXG3w8wvdIiUi02CSaaapZ
+FDQAXHmgcaNA15tQAvF2opwCGafbfen1CCdu/zlB3oDQPRjmmokquiijjTr6aFn2EfQepJVaeimm
+mWq6KaedevopqKGKOiqppZp6KqqpqspWHhtu5ARH+iU51Bu83Vgrb8AVh2svb2bXC67A3aejrQFC
+5QSlEpAJC5izTmergLfZSihxvA1KFK7S7QcgecIByxtzuIoHnRN+ugqhs0ORoJ+DscJ53bTw8Spc
+tdHpGJS3uG407IHWjtgUEgZuNMr+iOkhitS8Pca7q62+clTrtfty65+UQH7bi2383nbuKOnWye6h
+/r2blK0Y71kyosXey1G+vJVHrsHF/stUqxzBulHMTPEqL7SI8urwRhDrSGB06f34LXMXCzvxxhx1
+TJXAYrgqj0aI3qffjiQerN1GWhI13LobSUDtq1A9smyN+9640XPRzTwyoFmPDGV1G6kYtn/3ct31
+DSciccORAqPoMb6Hhtd11cXdACDWWmu999yNE8cR3mPD1+5TN4x4sxiJByUPuW+nDPfoVX5d9n76
+WQ432KoTKjg2hLNsuH7Mwb24sXLHPbnjdJ+eYd/MAn55yE1F7WrncIPudt2P667+m9dZwypP8H9j
+yDrlrt8Gu+xFjZJe2H//6TTqz5MOOYLDcT3czU6FGDDOtheHnnrYDTmk45jzjgTZI0MeIUeg0bHv
+ledpTknRit4jvpF5aSOCc9y7IBcm/cltfWwrHlMsVzN0wY0EwKEg9rbGu4NFMISlG10vCNiq7jnw
+RMjykO3C1EAUNU9MI5wgBrUGQLZtSDcgXAoB8WbA4nhQPTncG/789zvc7FA950Lf5FKYnhVSpWYm
+2g+9SKgiWvEmWrDY2QnTB8HmWEtyTEGWhVS0tqBY6FkuO1kXT0hCXL0BQ1B0HHt6ITUIHekp60LC
+zTw4vqD8sGS6Cpqt5ChG7Nn+ChuiUwr8SJCeR+RhkGxcGSLppLA43lEoEMOGjUbYyT3tcRR9dMof
+b9Y3S16wOomEoyZvuMj78caRULHiiSjJyvhx0WS6mVcYsRUdUCZxlM0p5SmnAsoHyYNsxeEfCYBW
+uiSGaZEorMrZCAaLtK0RR5g8nwjzd0S7wcqYTqOUE3EDq3I+5UPKypAzg4KEUViphiUcYwBzqEQb
+TkVzsPobh4SioW9O03yke9eHgonHKG6JnU5xJ5lIYEe4zbOeutuTQY1YFN00UYAkfMoyhRfQz42C
+oEjM6HZ086GOPlGUDF3nR51CT9scrVaI0txueEdN6J1LbpXrn1QcdDNbTan+OBqSpgh36jQzqi91
+YtPbCKnnN8DhhgQljSlSnJC2mq5tQui8qCX/Z8aR/RSrGaQnl76Vxafm1Hmy7FpPtQbQspqwrFW9
+KgtflbakvaF/Xt3ojpQ6sLHCR6rCmyhVZprWWq01b229Jz5N1zzrVW94ddXeXYEalc75apO9eAQY
+DQrMnf0MsJRjWl6JkqPATktO4LInLAkFLZUJM47bipgJX1Y047QplE95RPvexSv6vPKGPMtVyZJm
+r8fellhWeYPBIjit2L3WoMn9oq3EUNpe6lFiuJWjxpwDAN86BbhZ45UEqGs/1iYyubQ1rW7LddB2
+ukmn0FLvN/eGXuy6bLv+nsxufKMLXtSqZ7xmXRWCE5ymsQ2EsE5pJkHsIqmBfDUqExZIhQnD4PxY
+ZcN4o8uFSZDhp4R4xIIpyPWogmK7QHggVmmxnhQs4xnTuMY2vjGOc6zjHfO4xz7+MZCDLOQhE7nI
+Rj4yp6YUFAm4iCP8Q5xURIIbqm1Eyhmq2udAgg0BD4XKVGscAORBNZGQx8pj/oh8O5JiTzbZyaN4
+AwD6eqWRVBkkafvdRm7Q0zbN7F5hjsqZP3LlOoekymu+8ke2fBQqd8SoGhkJbujcES0bjNFDuQEA
+3nYkj+AU0SDJEqWNEiSRiDnUSMYLCYqn56AECcpC+RCnkarmLlftzwL+xTJHLM1kLmf5ym94k60N
+HZRg5xrXJPj1rIeSB49EF5BpE4NWhT0UW88T2a9eWR7aDItHPLDV0nYznLVFFEsX+9vDPrSuoWsU
+RntkWYPmCLGJDe8UH/tE5HayR1bWOTLxD9n3drV/1L1oXFs6SLI+tVs4azcARDfbVfs3NqwEyCTJ
++90V/ze56bNujVCNTuaO96HfPe9kC0XPq97XAzv3noqT/DbffMShBb6ie8kDziMPipze82akYrzW
+IW+5yPfzwFtXGVhXIjfIiZL0f28bG9wmzsqMxfSMD53Wvb45wuuCDf1kO4BbfziuD3T0sJ/b6kAP
+OsALbGIvZzrTH1/+88XDbuCKI4HhTLaZu7t2IpYTO72whZCr6j6igD0Cy/KWKNaJrni+oxvXvS0K
+u0F3KKTD/efxBg7TB8Xnhc9MDO+ZuuMNvPGrV9nEWXdLqgemN5iD/SgaL0rczZ322bN80FSOYdIT
+n3YSLKvid6+7wWrPeNLzUNlN/g/lJGr4nyNu7WSPvNIbL5TaR75z6aF82adN76mRffMRYzraac/8
+tBecoKd/i8LfMKLUMxr8/R6/SFxN5vDfm/oc10jAbJN7Qn+EPIGOs35U3Gpt06EIX0joBrHdGyVh
+S3rcwLKAjsjVHpPl3a19msUdoOzVH/NBX71hH7xh4KSBhI78m3n+bVuTgd//tV72QR7BiYSDnR9b
+BEgeCEzN2ZsKCgVo9YLpnR30KR7xPd643V/X/Nr+8SCujYLAyFvdhYQLUaAEYMjwxcrQ6dN+WImB
+tQio6V6GYAM2jB/9+Vz0+aDasaC0OYEp4VoRYp0EGNi/OUFIpMfm5ZptgB4hiR4ZlpvdvBkM0sUj
+6JmOjNqn/ZuRJEXsGaHZodzoWVqOFGEhyt+h+d3CZcwDAd/ZtZzH2Q0VahfyeVr/AV3NUWAQml0U
+4iEi3qGtdY63vV0Yjty9AeGKuMolbpP/kV3Qvd7okWL47WFbtIktKd69CZ5SFGIjkuKuJSKWtQgj
+hhy59WB2rMz+DTyIs73Hc9xMFFabr0iAg3EhKFqavDkBKIbi4lme9ImNzIkivXnEClbi0oWdbwQF
+aCHOI+TSG3weLaYbr4mhpc0TFeriWjhB1b3b//VCChqFMMZfQHKiohmjOzKiQYZeeogEA7hdrNRX
+tcWZRY0EFNpZhQVPUQRJhnFjoZHaHV4dRoagoAVaQprimrlhOpYksc0HJ0aE09VhpbkhAHRaCs5i
+ot0jPoYER/IjUAalUA4lURYlYCiXIYXF0ZSMyXTHUpbMC16FtzCl+SHGU/aMUWalVm4lV3alV34l
+WIalWI4lWZalWZ4lWqalcvwEW/qEF2JGCralXNLEW14GIM7+JV7ORGoAAJBchF/+JWA2xCjUnmZQ
+TUkFJmImJmIOZl1aRpAoJmRGZkVkxF5WZWZQTWNWBmaKxmaGRiqCxmeWRkRwJmFeZmnC5WnaJS1y
+RmiSxmiGRmeCRmx+xmx6Rmt2xm2KxmvCQgcwgm/+JnAGp3AOJ3EWp3EeJ3Imp29SQLFlJmXE5g/s
+gnROJ3VWp3VeJ3Zmp3ZuJ3d2p3T+QHOKRiqKgXKWp3meJ3oqZwdQzmqGxm5eQifEp3zOJ33Wp33e
+J37mp37uJ3/GJySEJ2wG2xMwAYEWqIEeKIImqIIuKIM2qIM+KIE+AYCCJpbJAz30J4ZmqIZuKH9e
+AntWJkf+wCeHjiiJlmh+/ifiOOdkxOaAQqiLviiMxqiDSmiKimeFXqiJ5qiOjqiH7kt7gsZ77qiQ
+Dul+ouiVqahksKiMLimTNmmD0uiR2miu4SiRVqmVdkKP7sePfkaQXqmXCqmR1mZnKKmTlqmZLimU
+iilr3uiXtmmOZmluuue9WMMg1Kmd3ime5qme7imf9qmf/img1qkCTChtBpsPvACiJqqiLiqjNqqj
+PiqkRqqkTiqi+gCh2iaWMYACBCqndqqnfiqgWsOHosZuLgA5nCqqpqqqriqrtqqrviqsxqqsnmoL
+XOqYBlsuxIKu7iqv9qqv/iqwBquwDiuxFquu5oKtrmn+rq3CrDarsz4rtMrqAozqaZRqtF4rtmYr
+rNZqjQZoiuWqsYaruI4ruRIrsnYrhS6rtq4ru2LrtPooiG6EqbYrvdbrtibrZsQmuJYrv/arvwbr
+uUapZ1Yos9qrwR7sqb6rlsYrLPjCKjwsxEasxE4sxVasxV4sxmasxj6sEeBrYQYbKYSCyI4syZas
+yZ4syqasyq4sy7asyJKCx2ZGKgqABWyszd4szuasxvoCtZrGbiKCFASt0A4t0Rat0R4t0iat0i4t
+0watDcQsaqZYNnwB1Vat1V4t1mat1m4t13at134t1WYD1KomRwgANTQt2qat2q4t0yJCz4rmvYio
+m87+7YaGaWpaBpmeqd7uLYOm6d1WRipaKN0ObobC6ZZ6RpcSruKe6NjirYDyLeRGboH6LZJGRuBS
+6eJmLn0aLsPKreZ+bifYbeVCRt5KrumaKeVKaddgLuhmLueS6r3IAgLMLu3Wru3eLu7mru7uLu/2
+ru/O7gQ0rmYGWx0EgfEeL/Imr/IuL/M2r/M+L/RGr/HWgfBSRioywO9mr/ZuL/f+riy8rWvey7wi
+LPm2K7cKrGzi6r+uL/v2a8Cq6XIQbPnO77oqbJwCqfjSr/5e6/nC78d+a/sGsACba/VORuAW7P4m
+8Kza7+F2hrUqMATfK7oWKgAPsAVf8LEWsGQccAT+d3CrMjDDjq8HjzA59O/fPqf6YrAKB/D7nrAB
+yy8JkzAIwy5HyG733jAO5/DuBu8Ee0ZsFq/0BrEQDzERQy/19jBuZqoOLzET5/D3wisNb4Tntu7i
+ii5ppliLnq4WN2nqDuyUUvHnvm61xi0Ya64VeytHZPEWrzGMdnG6rm4Zuy74jkbixvHgnnH6YjEb
+7/GLuvFnXK4dK64Y++y9AC3bHjIiJ3LSPi0Sc0ZsTi3YRrIkTzIle63YNnL8lu3ZKjInd/Ihuy0U
+jzFHOKzOlrIpn/LFdiwm/y9HhKzLvjIsx7IssyzMrrLMYhnNorIu77Ip82woEzJHiHAMR7AJj+7+
+Y+jrCifz+rawMTsGBw+zB8+wKMsrNHtwMV8xR+yrMm/zuDKz6mYIAlezAkszMFOzOEPwNaPxRmgz
+N7czAdsyZjzzOScwOcMtR0QDJ+SzPu8zP/ezP/8zQAe0QA80QedzImhwZMTmoVIqQze0Qz+0pFoq
+PJPtRjAALxQ0Rme0Rm80QUfDHOsmGQfyHSM06T4uH5/0k5L0YwCySNPtINuzFLc03eIxBacxSt+0
+gvoxpn6xTLvpS4dviPa0m9K0D5s0Th91hKq0M7OpUH/pT9NxSDf1lRL1reoxUiO1TicxT0u1lT41
+SHOEOmCBWI81WZe1WZ81Wqe1Wq81W7e1WO/+gFI3xg/PAl3XtV3fNV7ntV7vNV/3tV//NV0fMfr+
+MZbxgVsfNmIntmK7tTp8tJwG8zwrcDrncTa7s2W/82DvdNeEc2TPbz0DtTl3Nv1Odk2v82WfNrB6
+sxdvtmjr72dDNWS39vySdlFXMGrfdgZPtGPCsGyT72t/dWj39sHSdlVXNm7jtmq/MTgLt287Nv5y
+hDXkgHRPN3VXt3VfN3Znt3ZvN3d3t3RjQlwzRmzqQgOUt3mfN3qnt3qvN3u3t3u/N3yXty6E92Jc
+r3ffN37nt357t6j+MkzDwhRzNZjSt2KU7lWjdFYrKxwLeJV69WPHNIMTKVU7slEfOIITeGL+sHSE
+C6mDPzeEb/iOTni+VriF83GCZ/KCg7iOdjiXFrInvziMLy0jZ3ZxbwQkVzKO57iOb+0l07iCw4LZ
+xriQD7nQgvLCRjEsgAIvLzmTZ6wq+/iIp1gEzDKVV7mVr2wEYDhizGzNNrmXf/nDgoJzt3hsM7fB
+EjeF2/Zxn3ZyE7a6mrnB/vaDw4Iwwzm7onmUG/eas7mWH4Y823m7yrmH0zmg1yues7Jp7zmf6zbg
+8nah1++YI+694DNHV7qlX3pAHzSjo3CKLTREfzqoh/qjSjSUa8b1XjSmp7qqV7pH+zdoA7iKh3if
+G4aBlzgbn7ipM3WsmyiLS3pQ77qJijj+osOCGtv6rc96YWg4sPNopDtwVC87hwq7aVq1se8xrt/y
+VkP7hva6s/+6ttctshNGrVf76V57POv6txdus3PGbqJDCLw7vMe7vM87vde7vd87vue7vr87M4T7
+YMSmOyyDwA88wRe8wR88wie8wi88wze8wLuDv59YYe87xVe8xV/8vqPDum/GAz/6uh76tOu5ortz
+m2v2cns8pLs6bAc3yvNvxAcGMo+8ZZe8VrN2y2eroJM5y9/8s4J81Iq8zG8zzf+4PHA2zztrzvv6
+zh/9rPr8ZcR80HPz0KP4yTP9syZ9t2/EIHwA13e913892Ie92I892Ze92Z8914P3pq/+aLDJgNu/
+PdzHvdzPPd3Xvd3fPd7nPdy//FFmKtr/PeAHvuCj/SBsvGbUcbr3p7T//EYUO7mXO9//hbInfoca
+fmYgPuXr5+I/PYk/vumaO0VnCOtmfn5yO7s/O+kz7tonaed7fuSC/m5ne+rjp+lz/L2cAQvkvu7v
+Pu/3vu//PvAHv/APP/HnPgpEvl8APDIsP/M3v/M/P/RHv/RPP/VXv/UvP8SvvuXisjYUv/d/P/iH
+P/GfgeVjxm4qOZin/5I/uf+G/EZM+ZXHv/xTeZZrP2Rwufrnvy6LucoDN6FbPUCQEziQYEGBLWAl
+lAdAXkKHDyFGlDiRYkWLFzFaXNj+MGGuWB9BhhQ5kmRJkydRplT5MZfDjRlhxpQ5k2ZCEgBcrjK4
+k2dPnz+BBhU6cIHDmzWRJlWaFAAJhwuGRpU6lSpPhAoZLtW6devLjivBhhU7VmVLrBy5plUL86hC
+nVXhxpVrsKhNnGvx5s3Y9Olcv3+nXoXlVW/hvIQ9klW8mPFJs4OzGpastu3gt4AxZ95ZF1blyZ/X
+8k2ILkRp06dRp1a9mnVr169hl2bmMjJo2zUJu1u2m3dv37+BBxc+nHhx47vd0UZ7mznbu7D4xJY+
+nXr12OiMPm++faZoWJc6hRc/nnx58+fRp1e/nn14SMq5x69I+AkT+/fx59e/n3/+f///AQzQvifg
+k89AiCqTh572GGzQwQfZuyS7AymkyDvwIMxQww3Te++sCimkT8ARSSzRxAAJ/BBEAxNckMMXYcxQ
+QrtWrBGWC2PMUcf1PIRsORuZE/HEIYks0r8UfQSSuxZ3bNJJ8WbsTDsl5cPxyStz7JEwKm0T0sgv
+wTwRyS25/IxJLNHkMErPytzOO3Wsi1POOV1LpMA2PyNMl+P47NPPP43T5U48JauMAWboTFRROdWZ
+kFA3nUoIKs0opVQwMh89rLbEGuvUU7IewzTTtRK8rNJT/eKMzVEn825SVGGN69LaWMULsU9xzTWl
+UGmtlbLn5DE11mGjUnVKXwv+c5XYZaOa9Udku9pU12mpBYnXZ6FdqlRmuQXK2Gwlc3WVcckt19xz
+0U1X3XXZbdfdcY0YFNylCJMmlHvxzVffffnt199/AQ5Y4HulkXfepBK04N2FGW7YYXe/PTgv78SQ
+x+KLMc5Y44057tjjj0EO+WKDJaaJMJFRTlnllVEmuWSZKkOC5ZlprhlkMRx9OS3vdDa5155jEhVo
+jIQe2qJVjcYI6aRl4pnpi4p+OqKopX6I6qppxPqipbWuyOmuIboaa7GrJltqrsGWMm2YAGjb7bfh
+jlvuuemu2+678c4b27UXytvvvwEPXHC49077psERT1zxwNfOiITHIY9c8sn+Ka/c8ssxz1zzzaFp
+PCJoNg9d9NFJL33yzj232vTVWW+99NRhj1322Wmv3fbbcc9d9915793334EPXvjhiS/e+OORT175
+5Zlv3vnnoY9e+umpr97667HvXQwAUE9olBseygP1hZCK26ms+n7bKfIhgvuG7iVCHwAJHmLocMLT
+d7uh/AHoBecbsbU98D0ECaN4AwCwEakbwa0XCXEf/ML2QP61TYFGgeDUjkUR8rEvWrB4X/ZAmDQn
+POIhb6BfQrbHEQ46JA9OaNsokGChZ8lPIit0IEcK+IYYTkR+OnRIbVZoQ6w4BAk3aCAAJXK4HcIC
+CU4YRefk8QYSIjEikcn+4RIj6BBoOOGIN5zIFi8COpiQT4xc2WAXQ5jGkj3CCSwEwBJ7ERkbQkOK
+sNgiGts3w/1lUIi06kUF8wiZP/4QLUHko3bY9zNYmNCERkGjBLDhxSouZ5A11E4etKPIzgCSXhns
+ZEKw8T81jhJc0OCeTQbYmUfIcUpi6KIQCTlJyFhSlg6BpAwhs73/ARGRh7RaJKkYvjd+zyEjJCBH
+FEmrW9KShWjUJDYaIobHUZAEB1zfXaqJwP9lExv02+BdHoENBOahgf4TZzcTkodz5gGFccTGKO4y
+Ck6Skp6jMiYssMFOWIghkqysCAmAGT89zhKDtRwiD/fYmSPy0mq+TEj+AZH5LGJicoeaTOZyYElQ
+O5IAi4pEwikXMgpYYPIGSMCkxXCSQlg8ooHywEbnjvLNlb50pW27US86Z8DBvGGPnXNCSbcITjzW
+k6iEYuM+31DMhvhTIjkUZRXfttA9Ek6jsaQNLsmHBHQylDZww8rbQinJEuqzjsFsH9wiRauMTvCE
+Ym3oQanIEPJt7xFYnJBM0ZkQF97ohOSTp0NuQILtoU4Cd8loURELpI+CTqSdGSBTEfSGJ3ptoLDs
+43KWKVCCRvGjhewlM5l4g8b2CpNvayMs7mlBs1o1IZnN4kN1ytq3ajQycr0LOQHgBHaK4QZv6EUc
+Z0m+2sCTiuSLo/r+OMi+wyaWuSC6QTj1edy3VTUhN3DCUxEqS8sey4/z9CIHA8tVuM7WJlKFyCga
+O9JTAlSYMbzoQypZ0KvKdr4crC1KIYJJMbwhUjIlX15hAVx//vUhpiSsYT3ZXAUfCJJJraUN8+DD
+i/yMhvKtHw4NaNcLaxQJB/QseUFMAvMS8Q36TEgdtfpBeTghrdiyYoYnwsECpnK1P8SZfSNKvnBC
+kXt1hEYcZYYT8gG0c6vEiT+juD+eBhioe13pUBccZfl8NL0bhoz67uc2XAZygi1F6wLd9kGsameV
+H+6q+qoaxc7FTQIOdsgoTptDBCpQbg58m5gteeeO7k23tM0xTgr+2DZ0QnLOb+CpkLEpThYfWYV3
+IXRekRBHEx5xFFOU8qUxbbRHeJcrYuhem5fyhgtmmtSlRlYTDUNkO7JYKRKosqlhjaffznrWkxEx
+rX+L3ZfhutZJecSouYKEbPJXwzArdqyRnWxlL5vZzXb2s6EdbWlPm9rVtva1sZ1tbfOa29329rfB
+HW5xj5vcbYWdK8mdbnWvm93s1nXj0N1uec+b3urWHQLrnW997/trjVsIF/cdcIGn24WFA9u/B55w
+hXdbnPfmdNr6zTdNps1sT6s409AGu4ivbeMHn7jHDd61iyct46nrONhOrrWRG23lQ2s50EruOe+M
+QBI1t/nNcZ7+c53vnOc99/nPgW7z7qV8bLWJwSmQnnSlL53pTXf606EedalPHekxcBnFaxN0rW+d
+610POjBydjvvMCJNZc8QPdBC9LLVpj5hcvvb/zOmj4u8NpAw+90btKYEx27sePf7etD+w4fTHS1t
+h/vhEc8EuYdc5XX/++PPo3eHO4TskLe8eALvwME3vvCJ9/zbFz87wtj98peXfO76XnrLZ/5Gmy96
+5z8feyOFXnajV73lT48774jCBb33/e+BH3zhD5/4xTf+8ZHvez4IXvS1oQMHoB996U+f+tW3/vWx
+n33tbx/6dLg6yB0ChuSPn/zlNz/yTRF223knBdVyf65CkXb+168dLa/q1v0LwpmX94wwk3j//zvl
+MWKucdgPAA1QMeKP+WqvNuwP/xxQ/+aO8xzC/w6wAsFCAPdO4xSo/SywA1EiATWv+erPAUlQICCQ
+8V5vAj1wBUsCAycvITiQBWXwI0Cw9USwL0rwAb+P8FRwBmfQBVFPgUShFoiwCI3wCJEwCZVwCZmw
+CZ3wCYuQARQwdgijAjThCrEwC7VwC7mwC73wC8EwDMXwCitgByUwIbIACtVwDdmwDZ+wANSvdlLv
+9v6O9dROarxE9vSwRGiPCh2PDv8u98ROgSoPEPHODucPD9luDxmRRPoQdmzPEPFOENePECXxEOXv
+BhPC8Br+sRP74xFTJxIvsewoUQ4VqBKkIBVVcRVZsRVd8RVhMRZlcRZpMRWpQQCmEBJrIxu+oBd9
+8ReBMRiFcRiJsRiN8RiRsRezwQxTMCFsoBahMRqlcRppMRPikHa8QxkGZhu5sRu9UWBAABdDcAHR
+whAe5hzRMR3ZxRCYkf4cYgO+MR7lcR4BJgKucXYK0AdlsAbv0OIYMAd1UEX8EC0oUB9XEAh1bwMN
+kgX5MRH9cQQB8v5OUBNhoSAX0gIRchAdIgYvsgIbkiIbMCKJZSLJsQc7sgIzshIdAhWGoCVd8iVh
+MiZlciZpsiZt8iZxsiVfQQrHcSAdogxSISiFciiJsij+jfIokTIplXIpmTIoy6AdFREtjiEnqbIq
+rfIqcXId7lF25nAU0QQRKZITPXEs8QMUPUcUvRJLShEbLTEtvzITS3ITyXIuyxIqH9IhSM8tr2Qt
+8bEt9fJJwDIuYUEs6dITzdLf/vAvnYQvudIvFXNHAtMn5bIw5/IwJQ4t8vIxdYQx+U4Ix+EzQTM0
+RXM0SbM0TfM0UTM1VRM0l68ndREt6KAGZHM2abM2bfM2cTM3dXM3ebM3ZdP7BPI1w281ibM4jfM4
+VTP9siYhN/IkLfAjBTMkRTJWSFIyK9I5UXIrO7M5sdMAodM6pXM6UaU6hTMhLLI73S8lTZE70fP9
+vrP+PGEhPMWzUsgzFGvjPNtzWtSTLdkzP6nlPe0TIudzWOrzLO/TP9NTOzXQIY6gBBz0QSE0QiV0
+Qim0Qi30QjE0Qx+UJ21QMBXhAUA0REV0REm0RE30RFE0RVV0RUFUEeySaQijCDR0Rmm0Rm00Q+Fw
+OTUyIQpRM3MkMuGTMCmTES0T6zDTR3eEMxeUR5FUR4A0QB1CSIdUD4sU/BIiM5tUTRTU5BwzSzfk
+SQ0U9qa0E6uUB6/US2FESbnUIRrBEtz0TeE0TuV0Tum0Tu30TvE0T930BMSxQ60zDlghUAV1UAm1
+UA31UBE1URV1URk1UOPgRZOGME5ATym1Ui31UvP+lAi2VOYUSBvp8VNBNR7DMRehNCHMUR1RNVXP
+kR2Ds1RhAR5DNVZltR43lQAVEkH/Ey7Bc0BHElJZ7kBxVT9rleNuNVjhT1fhUz55FTMKFDEJ0lh1
+ZT/7sj+htVMANExxcFnH01ddDlir1VOktTFXkhvItVzN9VzRNV3VdV3ZtV3d9V3JdRw4tB9htDbK
+IAPwNV/1dV/5tV/99V8BNmAFdmDx9SlbFVsT4hjgdWEZtmEd9l3/YFghrkvRFELA1FmjdEwNk1uB
+Bi0rFkLUlFMp72O/FFldVUo11vPK9AxhAUtJNu8kFuUo9mXb42IvM2NTlkg5lv8Sk2ZhVkdVkkn+
+fdZBbNZIcTZnqXRndcZjh3Y9QtZWx/VhpXZqqZZd5ZVUERYW7pVgubZrvfZrBdZgk0QwFbZqzfZs
+pTZigXY9YfBbP+VaMVZStBVWmvVmzdNtwTVmuyYf8ZYx4NZu43Nut/Vg4/Y6+5YxwnU72/ZwF+Nv
+jVZuBZc+lfZl+o9xFyNxlxQWPHVWObdzQ2FUXdNVT1VVSbd014VVx9Y6YdVzWTdU7XFt+TMh2hRT
+abd2bddO+RRrCxdQG7V3ffd3gXdRH5VwAXdSb/d4kZd2NRV2p1Vom7ZmTTZrURZp4W5lm7Fln5dB
+npZYRzZ72aNorXQwqTdpifdxsdd7nVZvtab+K9H3PMDXTMV3fGPPet3xTNs3PbZ3Yh1iCN2wf/33
+f5twXh2yXtHCCsfwgBE4gRU4DMuwfMM3DQE4giW4f3NUbYKQWi0XLBw3fJU1cuOibs0XPzO4LNQX
+a/h2hDU4egu3gz24KkA4fEUYhR2jhKvmhGU4JTYYflm4hafiheE3hm+YJDB3TRc3iHFYhQF3h3m4
+WCa3ZCrXiHeFhqVm95Cziq34ilOzNf0UPmPTN734i8E4jHkTOFMXPsEAi9E4ja1YOS2YOZ33fs3j
+fVl2euUXTOg3KvESjtEjf2W2e/W4POT4eum4jmeviSWGaf+4E/h4b2f2jwO5fuOXkBHvju/+0n4T
+eTwWeX0bWY8fGY8nU5IPj5IJOI8vGZOl+Gm8gyWxcpVZuZVrcid1F3CBsilpuZZt+ZaXUmz3b2lr
+Yypd+ZeBeZW1knnFtYih2CRymGWVeImFwodZFoiPmSVOmWlsOJpFIpmvd5mZ2VsM+WCe2JqFeJqT
+pprBmQaR2Hy1eZt9wpmvF5qjeYhFNiE2t3XpWR5Bd4tF13T1eZ/JBXV3mXJrY3XreaC78XXbeEdh
+ARWpcaEZuqFj8RZj2Xx5MRkpuqIt+qKPcRkdGH6f0aE9+qMX2hqJWXFhoUdLuZMrOZJBGfS6eV4Q
++Y8z2YQ3GY5RepQ/eaXdTpQjtWdLOab+a3im77emd1pMcTpMdPpXj7SUoUScjWb3JvipofoJBZgi
+DXiBrfqqsdoLG7iMXRWCo/qrwboWKngAudeYyxkksBmS01mdeYKdIdmdjxmeodaszzoW0tqTA5et
+5cKt8RquoViuyxoWOLKu7fqcOViv97qlweWbCTsWAFt/6fqs7zql1xqxCYKvU9qvjfix+zghliAF
+QDu0RXu0Sbu0Tfu0UTu1VXu1Q1uU6HWoHcIeZHu2abu2bfu2cTu3dXu3ebu3aVuxs4UwlIG1ibu4
+jfu4V9sVmHpoXnucBxi2BRM+YYesIbuYrVO6XXW6M5CIrRu7s9a7G4e6Ue6PXKe8zdv+vJu7W+Xp
+vNm7vUUHnlBw7dbbvem7vicHuFBvcfR7v/mbgpqvvwE8wAEnvhVRwA38wOdG2xR8wRm8wR38wSE8
+wiV8wim8wi38wjE8wzV8wzm8wz38w0E8xEV8xEm8xE38xFE8xVV8xVm8xV38xWE8sRrJltyMifpr
+uy2EgQgqbrwMg9wmnypC2A5IsioqbrTIgObs2MAsqvgHz2L8yZmDBGhMtB6iLYSIt9qmpLZstn5G
+iDiozUwsIuCsc6DBiNxKiySrc8TACU6LsuZr1aAMyuW8MLZnhz7KxCIMwSLinZCgieK8xhLpWbxc
+O9gruxLClHBGkXqBxrTK0gy9qjD+ac4l/TPyKsK0qJv0HCJ6YYcOq8vvwtMtzI5OSSKI3CXc61k+
+CruOys3Hi5wm/dULQ8q9R4F64RGUa+8KXbNeC9Rfi75oPLcEy9cH3SLEC3SUHNaRHSnqfJG2CXxu
+fSKEvHCMfMe/bNitLMZIwIVGS8etfcvZKtnBnSucQALUSSF86Nkj4hF8C9jOfMcF/VhWyMAwQr9q
+LNUhIpyI3cyYKLbCvd+R4hFEK1KyrG3wC0GgacLevd27vTMCqor2rMaYzCF6waUGT7yoy98xPiNM
+Kaxey4bsHeHli9fJC8wp4rc6p4BOS5HoaLJWScK8/TlmLONlPiacoOHri4EmaMv+56vO+MfLfjzM
+I0LO0tzOqMqOkLx/AOzRm/zYZ77pdUcMHN3ppX7qqR7Cbw3X3k0tJIDbzE0puq3qwT7sxX7syb7s
+zf7s0T7t1X7t2f7B7fvt4R5y2B1sQCfu7Z6+517k7n7v2fveEPzv/57A/RHwCV/ABR/jCj/x+/sF
+rzu7Hd9zxBvxGR+8AZfyDQfHsSbyNZkiLT98tZt2NF+mHaJibKb0TZ9mgBtaTub0Wb/1Qyb1kSVm
+XH/2aR9jRCn0f9ohLoEeeL/3ff/3gT/4hX/4ib/4jf/4eb8PYN9XCOMZquD5oT/6pX/6qb/6rf/6
+sT/7tf/5n2H5ayVBSgH5xX/+/Mm//I/fp6dYgTBEqTtBSyJQkIuapTdaa86E/dEfldWf/d3D+1kl
+D+O/kAECFix5AOQJPIgwocKFDBs6fAgx4kMSAA7Ko9cpo8aNHDt6/AgypMiRJDNeOkhRosqVLFu6
+bAiAxMFLJWvavImTJCSLBV/6/AlUJUGDAp8wOYo0qdKlTJs6fQo1qtSjT3gSDYo1a9CUAi/m/Ao2
+rMiTArlqPYv2Z8yDBzy4fQs3rty5dOvavYs3r9tFVtP6/ctw6MFw4AobPow4seLFjBs7fgy5cLi+
+gCsDNstgmN7NnDt7znsAZUXLpEmvFUhTrOrVX3d27Vk6NlbBRafavo07t9T+qq+vyv7t0qxX1sSL
+jxUNPDnW07BSG38OvZPrgbCVW4dIG5ZR3dy7e3/Km7rv6+QVCscYPT1xsrDMln/vkLlz9fTBTs8O
+H3727d/7+9cdHn75lXdefQZ+xZ57Ay4Ii3wHPmjTfdUxeN1+/12IYVQBTkihcgVCCOJxZY3W4YDM
+BfJZiiqueNcwlJWoXHbfhEFjjTbeiGOOOu7IY48+/kjjNy/CCJxZfLCIZJIrBoIckfA5GGKUHkk4
+npOlWZhhllpSNaSVpX0oZZgmNenldVCKGSaVZcqG5ZZu/rdhlWv+BSaaUSZI4pzAnWlniGrqaVmb
+bw7aXZyAWlZnnxDieej+njIJNA89kk5KaaWWXopppppuymmnkvbRZaNnZZfNF6aeimqqqq7Kaquu
+vgprrKZmE6qoWZklQCme7sprr752Og+ZtlrG3Dx3HItsssouy2yzzj4LbbTSHktMrcMClZ0WVWzL
+bbfefgtuuOKOS2655m6rhbXX+oQrIdO+C2+88kob7IjrEvtoc4pG+ee9s1XHH6EC42aov1gluq+B
+jBrsF58JG9gvwz4JOnDFGqorsUQIP6zewhlr5TDH6kX8MUsUW4wyUwWX3NLGIkPnMctAMXdAOzbf
+jHPOOu/Mc88+/wx00DbPgbHMgVUHhxxKL810004/DXXUUk9NddVKw1H+tNHmkcgAFEJ/DXbYYgcd
+mr1aq5XvfC+nR/LZDp2cctxc9ua2xiQOt3bHwta9Ush5G9c23wrBLXfKKwvOkMt/sxYz4hH5vThr
+gTtOd22FX87E4ZQjpHjkYjW+OUxpew7d5JQTjvnAmofe3t3okV4c6KwrdKKStt+Ol4uVz747YZH9
+Dnzwwj822e68G4l78srDxaTZvDMEOez2Zc036qkTunronUuPk+zPCxQ99ziZ7rj117+Z/ebbi1+T
+99+Hz35N5CNu/vlbpk/5+vGP5P7z8O8/kvkJrn72yxL+HKc/AIKkf7xjzjkGAMEISnCCFKygBS+I
+wQxqcIMQbAX16pb+HXN0YYQkLKEJT4jCFKpwhSxsoQtHaI4Pug0zzuCgDW+Iwxxu8Bx7+95B/qdA
+kAiwegArIMoOiLgEBrEjDJwdEJfYkSGCsIhGrBgSBadEKGqkiax7ohY1IkW3EbCKcJLh2bL4RS6G
+rli/aqMb37gpUBlvdqSSlR3viMc8xopWc2QdrnQFx0AKso31ap0PF8IcREhhkYxspCMfCclISnKS
+lKykJRdpAzNqLTvXOJcnPwnKUJrrGpo0Gq6occlUqnKVrLQkInp4SC9+UTqllNkYydifK/INjVpU
+4+Zk+cUwnu2WuPSOLuvGSyj6knLA1KIwN0nFYqKvlixL5hKX6Tj+B2pgm9zspje/Cc5winOc5Cyn
+ObfpwT6GLju6aIA73wnPeMpznvSspz3vic98ulMX1CwZDc8J0IAKdKDm5KHzDvnDfC2AHAxtqEMf
+CtGISnSiFK2oRS/K0Bb082PZyUUsPgrSkIp0pCQtqUlPitKUqvSjudhoxoSzCozKdKY0relFFwBL
+HzJnoTbtqU9/SlGNqnNzHV2pUY+K1KSqtKVDzd/dYgrUqEq1pzg9KEIbpNCpanWrFhWqeHxYVKWK
+daxkPSlTv/o9mHJ1rWxtaFUNedWEHoSnba3rVL0qINaFtax87atSz5pX7T3VroSN6lsVhFDm+MEN
+jG2sYx8L2cj+SnaylK2sZS/LWC+4VGLZiUIzPgva0Ip2tKQtrWlPi9rUqvazUdgsw4yE2djKdra0
+xawfcvq+rBZ2tzbFK4f0Wh2P+nW4xEUpYH8rWItAlbfMxehh83TVnTZ3ul11rcH2Wtzsave4clLf
+YKkL3og+N65yFQhdw4tecvi2u6cLrnbfm13u+lCt6U3veMmL1bnWN73rBat74Qvgvso3rd/dL3jv
+S17m8EIcDG6wgx8M4QhLeMIUrrCFL8zgT1jXX9lRwSQ+DOIQi3jEJC6xiU+M4hSr+MMq2PC9MLMC
+DMt4xjSu8YV5gVv/6dbA1O3v97Ab4CAndcDPoy+Pp4vguEr+98jT9fHzgCzkKC/VxesyMpN5m+To
+7vjKu3Uy76As5TCXlMjHKzCXC5vlxOaLADpos5vfDOc4y3nOdK6zne+M5zYbgMrXyo4QqADoQAt6
+0IQutKEPjehEK3rRgBYCn4eFKxrkedKUrrSl8UyAHDcwX6BYhac/DepQi3rUpC61qU+N6lR72giP
+tlV2IhCKWMt61rSuta1vjetc63rXvI51BFotKlxZQNXELraxj51qUGjaiVs+s129TMf/innaYwZ2
+o6zs7LqmOZbNzjZboQ3cqwiX2uQOKZlnh21vr3XbOu22urcK7nVKu9zlPrcfzfxurrI7twe5hSf+
+DfCAC3z+4AQvuMEPjvCEK/zfxbD2obIDhldIfOIUr7jFL47xjGt84xzvuMTB4HBAYSYBCy+5yU+O
+coXfYtlddHe+pRpvos6b3tS2d3K7styXb3XfOtavzrka8/aKm+b0trl3lftzfbN8jS5Pek+DXr6Z
+Ez3MRncq0p0+VZ5v2udYjyrU6Sf1qUe56gjEd9epuvRf5svfKW+7299+8IY3NepXcQAg7o73vOt9
+73zvu9//DvjAC/7uDgi5nkYO98Qr3u0rt6qauX52n359gGEXe5DJnkSzR56mWmc25Ddf08kTceiW
+FzPmsah50Ds37cxsuuorKvopkr70Uj79LlP/+op2vuX+B+k0sn8P/OCbmtVzB/tV1NCG5Ct/+cxv
+vvOfD/3oS3/61E++Ggw/J2ELf/vcB76yHc/tg7D50uQvv/nrvOfiU/4qQui1+98P//jz2tHqv/1B
+BCDp8+t//+TPNPjb/Xm5d1GxJ0aVR3vvZXvIhHsCKFG7x3QByIBBhX1rAmYHiIATWCbpFoET5YBq
+B4EbGFEEOEwGaIHFlYAztIAg6Fasl035Ug9eAIMxKIMzSIM1aIM3iIM5qIM7CIOJgIFekh3rEABD
+SIRFaIRHiIRJqIRLyIRN6IRDuA4/aCWYMQE8aIVXiIVZuIP1wIKIs2QqKIH1J3sHMW4lCGAneEYp
+CIb+Hdh6HwiGDSWC0DR7ZghfaKg1GviGK/h//GZeeThRcWg0FUiHw2WHpqSGKsiGLeiGeQiItkSC
+g8hXhSgzeOiHieiF+bIF9qCJm8iJneiJnwiKoSiKo0iKpaiJgiCFTpIdrpACreiKrwiLsSiLs0iL
+tWiLt4iLregKqUgkZiEGpgiMwSiMw2iKW9CFgsMcX4ZcMsdedDdf0IVu0Bh+P7aMQudfzZh5h4RY
+0/hk1eiM1IiNqKeN0qhTvUAC54iO6aiO68iO7eiO7wiP8SiP7zgK3gh2ozCP+aiP+8iP/XiO9RiO
+t+ePA0mQBamPvUCO7wMAC8mQDemQDwmRESmRE0kokRVpkRYZkFN0kRvJkR3pkR/pkBmJgiBJkiVp
+kh6JXympkivJkm4TEAA7
diff --git a/Documentation/DocBook/media/nv12mt.gif.b64 b/Documentation/DocBook/media/nv12mt.gif.b64
new file mode 100644
index 00000000000..083a7c85d10
--- /dev/null
+++ b/Documentation/DocBook/media/nv12mt.gif.b64
@@ -0,0 +1,37 @@
+R0lGODlhFgFnAMZnAAAAAAYCAgAASAwFBQAAdEgAACQODkgASCoQEEgAdHQAADATEjUVFHQASDsX
+F3QAdE0eHVMhIABISABInEhIAIM0Mok2NI84Nk9PT5o9O5xIAHRInFlZWaxEQbhJRgB0v75LSLhQ
+TbRTUcBRTrBXVatcWsJWVKdfXW9vb6VhX0h0v8RcWZhpaJJubpBwb8ZiX8ZiYI5zc4t1dYd4eMhn
+Zb90AIN8fH9/f8pracpta8ttasxzcM51dM52dM53dc94dkic39F+fNOEgpmZmdWJh9ePjdiTkt+c
+SNuamd2gnt6lo3S//5y/nOCqqeKwr+S1tOa7uv+/dOjBwOrGxuzKye3KyuzMy5zf/7/fnO/S0fHX
+1//fnPPd3fTe3vXj4vfo6Pnu7r////v09N////35+f//v///3///////////////////////////
+/////////////////////////////////////////////////////////////////////////yH+
+FE5WMTJNVCBtZW1vcnkgbGF5b3V0ACwAAAAAFgFnAAAH/oBngoOEhYaHiImKi4yNjo+QkZKTlJWW
+l5iZmpucnZ6foKGio6SlpqeoqaqrrK2ur7CxsrO0tba3uLm6u7y9vr/AwcLDxMXGmkM3ysvMzc7P
+0NHS0CjT1tfY19XZ3N3Y297h4sxDlQDj6OLn6ezZ6+3w0u/x9M0A5r/3vvq9/Lz+kQDqEpiLIC6D
+txAyUliLIS2HsyDKkniIIiyLrzC60tiKoyCPq0CqEpmKJCqQJk+lNLWyVEtSKPPJ3Ddz0stRN0Xl
+DLUTVEyaQPvVlNTzU1FPRzsl5fRTaNB/QwNGHTi1IL6nu5Zu0qqpKVSsVME+4pqJLCazl9Ba8oqp
+jAIA/gTCIOXkVsAVo52OAABgV6kmMxr2Cgbil9LLGh/OIJ6r6QgBLAfuMm48YYzPT1siF7a5qUyD
+u1HibtaUWfLoS55NT+a0+DSklqXPxK5EJkuhm7NdV8pMYW9i3YJsT8q99Wqm2MQn/cihZRBuzasv
+RenrdgnwM8uFQzpSOfrrTcihW5KyogiYM89VF9cUWq7i3+sRTVlB5Lyj6ngNd/58pn0mMUmY4ER6
++R2nGWCEMbUIGQE2QUYj3Fnm3VibIPgeJ178kEFz4Imn4F8aEJbcWY18EcQLViziVoITOvLSFgXA
+5R4iVvxg44045oijByAU0QMIQAYppJAwPHhIFILx/qUeieDFCIB1igjBg45U4nhBlVSaAEIQYiTi
+2IzXLbTKF1mUaeaZaJr5RAc5aKeIFStw0RErVehARZp4mrlAnmlCscILU8yp3y5iILECBI7AKaeg
+q3DxQ5cuMgLgCg5uZBwuTpiAhBgQKZqRK45CKqYiftZ30aW1WEFDEF58xIinn4L6aCMIabHDDhye
+OqgtYgSRonOLwBqrrKImglAQUjyEalg0xjlRLKEuotayFIoliLC6whKtsVVFai222Wo7KyLT7kpU
+VeCGK26xhJTLmblZGZKuuutW1C2tUc1Lb7233TuqU9c6m9At2wJrLb68JEEGP/rG4u4iBaPnr7S8
+/ohhgsRnNOxwLgU/LJVh9YR8Qwsl3HCOCyHIIDI986yMjgwkzKBMyy63g1LN8JzAgskoq4wzOzT/
+3E0MIIiQggM2CG0ztbW88MUZDAgc7y5aFlHBCDsk4ebA8NryxQsZd7DoV7oIQcQKBpyhRRM/jOCE
+VV3X8kQRcKYtCBnsNsQLFHSLPQjecL+bi9lxApCFEjuM0ASzuXwNtdSMf5yLlkQEAcIOSmzN9S5O
+A6Dxs3HPogUIOSBhRQATy1LEE/d8vq+3t5BhhH0YA6zLFELo47qlocNChhC/unowLRYzDLnevbvy
+e/DC265LEqgPsntITCsPvCEef4fV9CVVz8ry/vYOjzwh3KvkvSrgh+985AGPDbrgvl9PbuoRNev+
+6wjHzzz29L8v7/G8g18r0sct8SkrEeXTyfkigaS9sIgRBCwge/bSlzBNAjAV/BACAXgIGAmmOxo8
+lybK8AC5TGdJh4igBAuhOUaUYQOWqQEIMVGb2jVGAh6iRA0N9iYOFmJE8RFhJ/CzIPn9qxDZoYR/
+NLEcBNClAUzIISWWw6FO+XAQQOzKAocjxUKoUBEImY+pIAEY+GhCCh0wT2OAkEVJkMc8EtGYB/cC
+pRBKjjVmTKER85fCBhlpEQ2c4SYGEKC3XWILCQhDGyUBIBNE4BG7O0IGtZg8SkRIEV+k2CJM/oSi
+R0gShWs5Q4aYY4kaiKiLlvDCBUjZCNcRMYh3zMSXFuEDHGAJS1e65Y20xKVGvPJNurTSjUbQox8N
+6ZhAosEf3ZIkADxQXsHU0QWI6SNkIrNIKlJAHSkpwEvIUEKK6AKfxrmncZbJT4BSxBZUIIgTlsic
+ZyrnE1bQJkws8gxkgieaIEDPFkaiBlCapR21dxwn7UWQTErEpCqlCMBQEJRrKdQKnkAaVFKiUB2g
+aEEPCk5YEpRshygV7VwRAU3lbRaZQsIA+qc+kBLCVriKhaos0CpcqIpVNpxaNwNXCGTJoldWyJ5C
+fcVDl35Up0blKVJjyT6lNvUgW/TfUp+6jzkhJhWqBqxfJQ+4Pqd6FXZXrepUv8rHsWK1q2e1qlnF
+SlVbsKWt4wurW6O6saxKFa5gZCn+5mrXiijNZn8FWmDTEbTBuqMSHDDsODCgWHEwtrHeeCxkucGB
+Y1j2spjNrGY3y9nOevazoA2taEdL2tKa9rSoTa1qV8va1rr2tbCNrWxnS9va2va2uM3tLQIBADs=
diff --git a/Documentation/DocBook/media/nv12mt_example.gif.b64 b/Documentation/DocBook/media/nv12mt_example.gif.b64
new file mode 100644
index 00000000000..a512078c7f2
--- /dev/null
+++ b/Documentation/DocBook/media/nv12mt_example.gif.b64
@@ -0,0 +1,121 @@
+R0lGODlhoAHkAOe1AAAAAAAASAAAdEgAAEgASEgAdBgYGHQAABoaGnQASHQAdC0eHigoKEIlJEYm
+JS4uLlssKzY2NgBISFIyMQBInEBAQEhBQUhIAFBBQVhCQkhISF5DQ2NDQmdDQ3NEQ05OToNGRHhJ
+SJxIAItHRY9HRXRInJdIRlpaWppLSaJJRqpJR7BIRa5KR2NfX7JKR2BgYGxdXWleXmZfX31ZWXJc
+XHpaWQB0v29dXLZKSHhbWolXVpVUU5JVU55SUJhUUqdQTrpLSK9OTKRRT6FSULRNS7hMSrVNSr5L
+SL9MSr1OS7xQTsBRTrtTUL5WU7lYVsJWVEh0v7deW4pqab5dW8RcWbdgXrZjYcZgXnd3d8ZiX8Zi
+YL9lY7RoZshnZb90ALJubLFwb8prabBzccpta79wbsttaqx6ecxzcKt8e4aGhr93dc10cs51dM52
+dImJib97ec53dc94dqiEhKeHhkic39F+fKeKiaWPj9OEgqSSkb6PjtWJh5qamqGamqCcnNePjZ+f
+n9iTkr6amtiUktmVk9+cSL6enduamb+jo92gnr+pqd6lo7Ozs7+wsHS//7W1tZy/nOCqqbm5ub+4
+uOKwr+S1tL+/v9+/dOa7uv+/dOjBwOrGxuzKye3KyuzMy5zf/7/fnO/S0d/fnPHX1+Dg4P/fnPPd
+3fTe3vXj4vfo6L//v+/v7/nu7r///9//v/v09N//39////35+f//v///3///////////////////
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////
+/////////////////////////////////////////////////////yH+EUNyZWF0ZWQgd2l0aCBH
+SU1QACwAAAAAoAHkAAAI/gBrCRxIsKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPHjyBDihxJ
+sqTJkyhTqlzJsqXLlzBjypxJs6bNmzhz6tzJs6fPn0CDCh1KtKjRo0iTKl3KtKnTp1CjSp1KtapV
+h6QkWdrKtavXr2DDih0rlpFWsmjTqkVrdq3bt27bwp1L16vcunjn3s3LNy2jVRU/MKhAuLDhw4gT
+K17MeDGCwY0jS54c+THly5gvW87MufPhzZ5DcwYturRkBGkqvgAEdPVP169Z+4Q9W3ZP2hJx89St
+k3dv27uBB4+tWvhO3ziRJzeeU/lN5zWhK5ROk7pM69eZL2+t/Xl3hthj/oZ/OZ789+jn0ROnWN5l
+e5bv4aefGX9l/ZTx7+Ofn537+tr/5cZffwAGeNyA4iFoXnH+FejgcAb+xmCEzSm44IMQ3mbhQPqh
+1KFJH4K4oXwNajghhhJSuJ2K3p1oIoopvgjjihOFWJKNI+GY44j28dgji+D5qJKOIRFZpJAeIpkk
+kAvZOMsBAAjQykdOHhDAJ1QqSVAhAABwpUcf0iJCl2TS0ZGNmZDpSJYcpekllmfyaKMXNtRCZ0av
+jEJQiIUIAAoBcMbJUSEUxHJkQa+wglEpgGKUJ4da1vLkmn1OiZEsoUC6USkDrJmJlIKyF+ksCWD5
+qaUWydJFHagIhCOj/oFyFCKpsYIp3CZPRCKLRXdeumqrs5Zay6kaxTGGniESS2uoNUYKay3PZhQJ
+FYnI8mqjtm5KwAVd1pltQangkYUnFEUrLbUtRGqnAKocsOZGmlDxRwyRZvLlpMwKqC2W5mLEyh5U
+zKAutNjme5G9WOJr8ECerJqKRIQautG/RsjRkRcAFNrRK4kUYQZHGHt5wbsb5edso/1mFEoQVrS6
+L5saEWunt7J+N221DyncUQ5OsJrRk2Z6AWpHN1RxbEc6a2TyRsvKjJAncUQt9dRUT/3DEUgcofXW
+XHc9CEMpK30ylmKaaRAebFSt9to/VLG21F0cQYUmDkXMENRvs13F/hFLXNH131wvgpCy7t6dt9pt
+L3HEH20ADrgWuyrktNguXlT2zAulEsrmnHfueec6KNEFuQt5QoUpYBdc80aXh11LJ2Vw8vnss+dg
+B+2cH3IEHg8zBHRDmuNOew5mPDE6RggTXOtBwQvveQ5oUDFGpnefvtCTNJcsp7qcRomqRq8Q4nFD
+pqMuOZlvLmxR9wCQbJApcbzSbEKoGEt9Q5V+9IoPSlCyEZddch/4dsCESjikfAl5UrdgNj+eUOIJ
+h5BBehB4oZTAT34R8c0rDvEEA8bkgTvog09AKELyWa8lS9NJw3wGHQpW0ILxy6BxHngIDL5khagw
+EkdwSB0XkkhU/jpBxRhIVwvn+NA9A4PIBSGiG0z4LCZCJJ0OwVcHKU7whEis3IEScsQstmSJDpmi
++ipUOix6sYEz6uIZWQLGIDFJPVw04xplWCKCqHGOK2njdJJ4KBbd8UdAjNAfUchHiegRIWJcnYoG
+OaTt1bEWjPwhTA5pkERq75ECieR+tBgjSMqRPoWcCCX3FMpvoUiTmwykg1AJSJmM0lWlHCONMvnJ
+BHHyJtWCDStb6coYHsSSlPsJD/xgx1raUpU6ecUTisiaXfKylzYk5Rtn8ooi2MaZS0JmTjaBB2Zi
+s5E3McUaeifNGd1kE0OQzTdPEp8TYKEv8ByLGvRgCQ1IoQmK/oinPr+igXfuE56IOMIU3iCISWyl
+n/9M6EH9qdB9qiEE7zQEPhsKTw3woSIagIxpNqoYFmCgAg5YQQY4StLEGECjJTUNDo5AAhMAIQUg
+aABKU1rSk9L0pixYAAM44IKR3pSjBkiNNm+SiixA0gh3mCZL8AAw1I0iEj9Igv9ktJOivmAOxoQj
+GnNSiT+YjgaykUU0W4QTTHj1hC/ww1jJ2JOu1oAJ5quFWNm6VZww9XQvsMMizrCESGwRJ0X1JOqA
+mRHCXoSpSK1FKPbaV7rqaydPOMIe6nCEKCzifp20SRYeVj7DXsSzFYlsD6xwhDNc9q91tckojjCG
+Q3giXUpl/skfPPjVWCpyJ6sdww7mELkMPRYnsgiEomAZ25Vwk2GJNedMgqso0N6yIc51iCzwQERm
+FlclyiTIW+OKWuBSl7jKbZJtKTLd6lo3vDDBmauwyl3H2qS8mkJvQqK7EPgWhL6/1dA6s3kT+4KX
+qnSsiX/LCeAt7ldE3jUvfgOc2pcMmMC+hdCBSbJghDz4vAV+SIUJcuH4ZpiuExbJhgvS4RFD15Ey
+6bCHI9zdEIPExAJRMYzF+9yUqHjF3Y2wi00ZkxvPeI81PsmNcZzZHAvWJiYe8o/ni+KYlekhQyay
+QBIlETd9CXzIGpiYrkyRR1WSOc5kX8YkdkmMPInLChxa/n2/C2SEYPZ6VgrUmZcX5Db/TAFTSh5D
+oizlWuBKVzkrgaG8oLGMqKoONxhYISSgOokc2mV93qXrgmmRPv0pUHfqlUL4rBz7McTS2AI1nYeq
+YT4mzcJsPnFCwjWuKqtZWkYQQ2/NnABINHoiN+utclg56cJqKVpNe7VB+Izhg2yCCnsYrkL61ev8
+MpgjzZZrqlWtkBWSkyFiyp5GYsAFKmxCI4WgQ7Qd8i9v//cgqBSzAH2tkWg9q9fELvZBZJGIXM3a
+IMy+dZ2Z/BFNo9q8bmRIrhfipkLXLBS/ukgpCtCKcT8E4axqYVYRUgguU1rh2Hq3vqUNcH4zJBV1
+aDVC/vI96gaHMYl2UwgcwnA4xLmt5XGI29zwZ/GnwVxqbYsa1hwHOMEZxAtmmjTebj41vhGB53/z
+uUNOjZEPuRtlG1850eOQ85tHtg5rVR5BHH7yfUMkfws5hfOGd7uxh0J3vGsI0w3SPLPbLhQPPB5F
+FIg+s4HL7J+Lew1MXbjbYhxOwf4eQcSO98293eyYoEIWvn0QkpfZ5BQhNJl5jJD6TW8hpYCCQPRc
+sj4Q4glTzQjXGRI+0MubV+8C++P/LpDL+fuz6eEYFQA9ctWNPuCQl4iYxyzLWmywgw0RU5dqnpHQ
+1RDaG48IDTEYIvYZfPUUcdPw+TUA70HfIIlPdkKk/v8m7hM/9zRm0fJh0jAh5AEnOISwkYs8kFGc
+4Qx6Oib4tVoQJ0LaJVFcchS/fN0XFqQOdANKXkcgHzZL6+de7Nd1/UdImISACUhW81cd43VxLOaA
+FgiBznaAGFiBBqiBSNZkBfiBDdiBDyiCpHaBJihfBBiC9PdsHLiBHtiCMSiBAyh/LwiDKJiCNxh+
+KmiDO0iDCyhJGViCMkiEQNiDMJFCSOh/MyiAQfhMTDSBFGiER/iDVdiECOFOFPVPCLWF8dSFXlhR
+DBWGeQGGZFiGY3iGdGFRGDVTP7VRNvWGJBWHcghUbliHnkGHeFgaeriHeShUEeiELFiEJJiDVxiF
+/iOIg4YoiIPIiC6IhT4IiUkohey2hOoniUxIhStohZuIiE8ITp+YSpbIgCdYiIpoijrIiZFYaomY
+ipiIR5q4igo4ikKoipPYioRIbbQIhbF4i6HIX0O4iJ3Yi5kojLKoi404jMboi7sIioGojKcYjbko
+jYfIir/ITpTYdNloEUvmccn4S9vIjeFYitToiK9Iis94jK5IjLC4jMWIjLb4juUIjfOojjxoEXM2
+ENJnd9r4M3Gmj9M3hRORj5unJtc3kP9YkOlTiQfzZJICJcImjhmxjwJBkAwZjF/nJ9gyC3g2LN+X
+jhSnkYAnaHbyfDUYkpdWkYWjerCHEaImEJzi/ikRCZIHwZF59iWZpm0SeRE26ZGf8JICOYusVxBr
+R5O1tzyTc5IJAWzCkpRKeZSbByrL0o9M4y6BF5Rz13e3d4+PWC63tpXeOJQDkW1YGRHmIjTtsm5P
+2XjYkjxF2ZUVASsaV3Jw6ZVwApZhWZdmeWuvBxFedm7rUzAFN3k7uSiqgzEmWZhTpmwQcZbDNzJd
+Fn+nxyt1MpcVgSl9Fnk0g5eIBIKBWSspNxGPBphxeWsVR5fWaJiAdwBBM5N19Wf3ljrL85b1lXB8
+ojGWWRHGkmX/Y3CcCY5riW+qw5IUkWtOd2u0mZpDSThqmVqs1nFLeWtOCRE3A1sZAXZXaRHx/jIv
+WsKSv8l/5NiYBSN5GlFuAtNuGad5PnmRn7l5X/Kdl5hJDuMQKYM9/rIHFZMR5Nl6IhA0OjkRHDM+
+GLGfAwGf8SmU0Yc+V7J7iSkRK9MyDUkmVyJ8C0mVFuF9WAJA7XOQAzFw26egn0B3/0kRPPNE5VJ9
+ZFIo3eOaE1E0RxOXKNolFHAJIMqenqgSQzd1V5M1SMc1X4OOJoE2U0c1Vfc2MheAG5GjN9c2fOM3
+Pbo1SocRStpyibM4jfOkRwA5vIigJ9F2hRc6cldtE0dh2Qg7slN4nXN4uIN215YRXup2xROmKPGm
+zgM90vNmTzOmfWSUKxE+AlpG7eWMJ/FK/lxJEJaHp33KP6G3E69AQB5UPYGKjcGJEjQkQZDKjChB
+qHk5ZRz0qC9BQiP0BCF0QHoqYp5pE+kncZEqqJnqS8opEONHfr/SjXY0q/OxY8FJq7Wwf6RZTKvK
+qq2adXlpfzLBq7rqe1XUqwWBq7k6jqXIrC35Ra6Ke/Eoj0eGqXq5jtdKjyWhqQdaj+oIrc3agOIa
+rS7hrcoKrtjqq+b4qkZWruZ6rtPamdcoqehWqvbKp7UIr/Eqr8KamdpKgvwannZGVQOrmC+hqcf6
+rTB4sPq6sATmsJPqEYQKsem6gRKLkdSqE7mkTvhai5M0rwA7jTYxTOyqrgxLTcvkGhk7/rEfMUoW
+O5k4UU3X9LHA+hBaqIZ0IQhkUE9YIFH5pLNwYYZCKxaKsAWNwE9pWLRrQbRMqxaCgAL+BLRPmxZs
+SBEZ5YehQQIeUAEGMAE9pbV5eIdiqxgbcAQqMAIdYAGE0Ydlexlu+7aTQQIQMBg85VNyKxlB5bIl
+sVm1sF3NOBKR9Qd4sARnkAg54KwaWxNZAAOA0LLjWlVG5QnJ9Y0qcVdOBVVSFbhdmgVXZbNAmq0x
+0VW1FWP/yq0uYVYUlFanW4034VZwNRBzhYqFahOYm1eM5Vfs2LlHFrMWi1hJtVh8pbsoO7IxEVmT
+VVmnVa0o4bedpbiiKxOiRVqmhaiu/guPqsVarmWdlqsSs0VLYFWvI5FbuxWbtFuw7yVcxtuuM3Fc
+mVS5zGtj6uu7p7pc00a/ybRMAwG43asS9oW/BMsSDwbAOaFeRcRe/YsS/kXAiyvA03axJIsekBvA
+DlxdDBy9NvbAEHy9LTLBDVzB9wW9N/rBCqzBG8y+K+LBI2y/AHfBK+xgJnzCqHuEKsylMFFiIuyu
+OgzCm+qOL1TDG3vDMezCO+y/Mby+M+yIQIy+MAydMlu8MjwSnJbDNoyAS0yvKXbETxywQYyQFrdl
+qElsyEFlS5eQYtagD/EoHWKRtQBAH5kQfxmfrJSPFOqQ/ZqgXWI2FLlnWvzE1nsQ/ntsZahZxF0c
+EUApEIuWfBxXxbD5aSIJk4oMEYeWaC75yIiMxnuWcAeqSYdcoJFcxRDRkwgjym8cY338xJ52PR05
+yiRJoAj7wnY5EKRiayUXb0/8nA3xdINMnbFmvrq3kcJiER76xOnGlyNKwmXsPrQpxt9xbNqndn0X
+lYJHwcApegUTbpNmy1sMSfO5bBkXo80pEdxmbkPJKNwCAMfMEOXGeEZUqiljoFGcy7aXfPEGHfRm
+b7I5liKQzrAMynt5lwznOtq8zQIxzMK5PKfpaxB3f78MJ24ZzROx0Kqaz1uCyRjsEK/Xl7J7yusL
+ciKXEL0ymGVZuxMRLUCndQYh/nVDWqSHc6RQSZQQbUc6+nI7h6VHEKWQ7NBDo2lTenNGZ9M3jXmq
+k5z9PBGh2caYrNJL+nIwd3XCetRtXMqETNIN/ZDoAwD8KBCEh6ahoKbOw6YvTRBFSae483Zx58QU
+/SyXIxBk7Tx692vDadEXvRAsSZwFsdV459XCk3iLF5LTTNTYO9UP8c6fLNiH6s1w4gWpx6JM5Hmm
+15610DqFjRCl5z/HKWes6XcV4cqubKMGIXu093O+qZ6c98qCzRAY6sm77M+/56kGgaHOR5gVYXyt
+S3A1yj7hzBCxqh+pbdembZYxmjGiENxy7c+1kH2MWRAMCgtjUqF3fNooHKsu/lF+53cT6YfE9piL
+7gd/SVzNM0KsMJF/VFwQvJqyHBywAHjeTLy7IMveW3q+KFzI8N3d2R3fXBzBPezDoXuO7a3f/R3Y
+/v3eUCzg963e+T3f9W3fBq7gDI7FnJuvCfzfA36zxo3f9L2uAU7gC+7dEa7hG47hGS6KyJzgJF7i
+1mrhJm7eH37iK96OCA7iAP7iLN7gKe7iBX7gEy7i8evhNA7j8p3jwLjjFC7jNr4QOVu1buG0SD4W
+Sr7kYtHkTq60Ua4WUD7lXHG1E5G1eZsZcbvljNHlXr4YYB7miDHmZH4YZn7mbQuII+7jKF7jEn7j
+F67iPT7jc77f7j3kPy7n/nAe5y1e5H8ez24e6H5e53Y+6DjO54hu6Hge4kFe1EAO4UKu4/zN4xw+
+6Y+e55Su6Zle4YSu54p+6Ive5zFL0Ize6JEu6e5d6kTs6KrO6a/u6adu6X0O6m8u6nR+54U+67b+
+6Zsu67pO66M+7MQO6Il+68bO679O5Ki+58je7KGe7MHe6w5+E3F8rF62ZHGM3dglmab+Etk+3s5+
+7A2xx5EtAlK9aZrcIRR5xrINZbY6kXbsxqstu5rM7R+ax3Wcx6K57koSyAaZKvGOPA4pyCO93hFB
+ynCSyPWOEMaJJAoPzwVNBSbLk6v8JVAdEcOsHwq/dZN9EA9vZhcfoivJ/tgOMS0Vj48jH5PDYvLA
+Dp4agS+z/PEJYZ7qMikSLxCs0ANMwHj+6AhTaRHrLOhw5j4aDRE2zxGTkp0XsfM9X5WOoCzB/Nwv
+n8/YTPMK8aAM/ZnqpjR2cO9cvy0LZBESzT0FA89a/zJoGdPc+PUm+pkPndvQfekXcScL13D61tNU
+WtNYitM/p20JbRB6/zY516RA7fcCcSdxzzBDKjU/bdOI//cVLduDnzdX0zeHrxCahpjvnkkr7TaG
+D/kI0SshEwCQaaFtrhB2c9Ku09bCA6Zo/RBQvXauXzt2cNYXYTcyo2m1Tztv3ZtkRvtcvTmwf50a
+8ztCM81szdW2g/uV/maSgD3u1V5pUgkldeco4vMx1xmR0b8QMvAFj039lqLW/VkRlf3tjvw9GQ+g
+2Q9uQ8OcGvH94V8Rdj2dqY/vo5+YBlqpSkKgio3IACGgVS2CBQ0eRFiQUhEwrxI+hOiFQqyCtETQ
+qVWKwCeIHWtRenLIYa0XgDyeJCiRYsFZBzCi9AjykAyTMDuqLJgpAEeNHG1CXNjw50OcB1vaGAqx
+ZNKCS5kaLDUAwFQAEwn2fErQU5c6qEjWzJpRKlUKosZaDbu1zg2wWaNSrRrrLQBHTNV6bdr26dyp
+EwsJDFvr7tfAYuH6pVo3sFq2hflWdXVgKtLCBJ0yvVxZs0FUYzzl/t0cmrNnwqIrd/58MLPpwKhB
+sw7tejVszbNt2qZdGHfurLt5P/X9e2hw4T+JF0d5/KFy5B6ZN1+uF3rS59NVS7d+G3v2k9UNeude
+Orz28cO3l08Inrt66+zZtz+P/rp8mO+h278fn75l/R3xN/+vuAAF7I++AYU7kDf3CjSQQfQSVNDB
+8iDMjULYFtyvOwnHs/DCDcPrkLUQRcMwQ/8+XA/FFE1USsXsRgytRBbTc3E6GGOsMb8Zo9sRIRl7
+fA1I/oT8LkcAjTySyCGBQxK5G2trkkAlxSPyycp+FNJK3aJEkMsIp6QSSCzF9LLCMs2cUsst03RR
+zcDc7O1M2uBksRJMOjFz8QQsLOGzTz//BDRQQQcldFAN9iw0UUUXTfRQRh+F9FFHI6W00j8ntTRT
+SjHVtFNFNeAjKzciqKBUU09FNVVVV2W1VVYfINVVWWelVVZYa8U1V1xv1bVXX1Hl9Vdhew12WGNn
+feARMJdltllnn4U2WmmnpbZaa6/FNlttt+W2W2+/BTdcccclt1xzz0U3XXXXZbddd9+FN15556W3
+XnvvxTdfffflt19//+03IAA7
diff --git a/Documentation/DocBook/media/pipeline.png.b64 b/Documentation/DocBook/media/pipeline.png.b64
new file mode 100644
index 00000000000..97d9ac00747
--- /dev/null
+++ b/Documentation/DocBook/media/pipeline.png.b64
@@ -0,0 +1,213 @@
+iVBORw0KGgoAAAANSUhEUgAAAlgAAAEcCAMAAAAsmToJAAAAAXNSR0IArs4c6QAAAwBQTFRFAAEA
+EAEBAwUBCgMBCAUKAgkMHQIDCwYXFQYDBgkVDwgFCAsHChASJwkDFA4NEg4TDhANHgwHDg8aExAG
+DBEjBBUZERMQCBNRDxU0ExcZFRgVFRcgCRkzHBcUDRdCNRELIxYTAx4mLBUMEBwcEhsiDxwhExsu
+Dh8XJRkQByAtDCMUHx4bACk0DSsiGScsFCRcJSUiGSZCDiwqGCg1LyQbIycpVhsPDy0wNyQVECxA
+PSIfCS84ADJCEStWRiIULSwpADdHCDkgEy1/BjorEjhADDhXCzZvITNPUysQDzs8MjIvCj04BT1O
+PDEoQjEhMDU3LzY9KTdFTTMYNzk2GD6PAEpfEUVjBExFCEpPB1ArK0FjKEVZYTscdDYXG0d5SkA5
+FEiJQUNAOURPAFhCA1RpP0ZJVEMvYUAyBFtRWkYnDlR+QEleAF1jkTojHlV1AGB4PlN5YU87cUws
+SVRXAGaBWVJKUlRRRVZlAG1PWFNSBGt5AmqVAG+NAHNpK17BWl9ifFs9KWmnSGZ0YGFfp1IuCnWj
+AHuKbWBXoVNAdGBPDniWAHujTWmLk14rAH+ch19XX2aRX2t8AIeLiWgvAIeeAIaqa21rOnehdW1m
+AImspWJYj2tLW3C0AIyvWXaNAo6xb3Z5dXZzent4WIKiQojAen+CkX1pcoSWcYDOoH9fp4E+Y4ur
+hoWCXIvGb4mut3xpqYNYnYdUO5rDyXxdjY6LYJqk0IRGb5azXZnMjJGUgJWqpJB8l5aUyJN4kKK1
+rZ6IYqzge6Xho6GdnaWpgqy6yZ9zvaR0hqzMk6rN5Jxxw6mF26lbq7C2pLTGwrCbs7Owvb+8zcGc
+8rp42L2xsMbY3L+jtMfsz8W2nM/yx8jH0MfA7MWU78h/3crIyNTo4NLD6dK1z9bc1dbT3NXOv9vr
+/OKSwur8++Gw4uTh0ef78uPU+OPL3Ojz++bGyfH36evo/+3b6vT88vPw/feu1/v+//bb//nK/PnW
+5f/+//ro+fv49/7///37//71//3//v/8sZeTnQAAAAFiS0dEAIgFHUgAAAAJcEhZcwAAFY4AABWO
+AUTUBDsAAAAHdElNRQfaCRQPAiJBEFMLAAAgAElEQVR42u2dD3wU5bX300nWws50shA4lyTGikRE
+Qy0aUChKvJZqTQGBFNurVo0FWq2VqhAq0hc0t1rAxtLLpu61cUl6gWtNe3vb7Z9IKm+Xqn2tkFih
+GmwFA9Xwpw1s/UOyCc97zvPM7L/sbjabXTLZPL/PhzA7O7M7s893zjnPmec5k8WkpNKgLPkTSEmw
+pCRYVlSjp5n/3+3xGGsONHt2vx1t04PNTbtP8aUujxAuHvN6XjHe721pbmqLsp/H021+crP5wce8
+Ta8Evi+wKMHKHKkwjf/vA+D/77SrAKDeeTRiO3/vcnzDoTzXgy/+CEKMbVdw5dh9tMGubAfuuMjf
+E7HnfgAf/X9yJn6Aupqv206fNfYdXHr/Aloc944EK7PBWg9QurVxlQ3s70Vs+FmAdQ0LAP6By1cA
+KCT2AsBqXKme7mEfajBr25MaTIjkSjPA0mHsVnz/G8jgzyBna4MGH/UzdgHYt9ZrMNovwcpksN4E
+eJpeHbLB5PDtelT4L/wP4Fr+95NirQa34d85cB1jX3eAsGVhiPRuR644WPjOafxgHXw9uD8axL/k
+3+gj3P4vLgJ0SrAyGaxzoFCsfpObJh8aJVMtzUSMA3JZTw/Ab8RKYcD+Rvu2ehsJJIBu9llFwdW3
+0l8N1B0CrDlgpz1K4OfIkRqgT4cOjNkkWBkLFiM4ejT4nXjVrcH/wb9G4BUUwOcZ+xCgtkh74Ci9
+9Iu1Jig/BjhDhmzCGUTzccaKNx9lAqwSUAVY17Kvw7U7S2wLn6fXRXCzn90P2dIVZhxYIlxSiCE0
+W+8F1l+GYDU0hG99P9/gVxiEKxiGvYPMoCMjT2a8fxyRQkQw9HpJg3EBGAmsr4PDz8Eaxz4F+UBf
++DjtMZ0WJ/9ZBu8ZDlZwfX7fjTG0x9ibPTF93D52UEdELgD9LXYw19zteA7onMwLAHuI74SB9QGG
+b372DKAvLQF4xN/7FPlR/17gjD3H/BKszHWFYRbr6siEA7sL4Jbga4zG2Yd2sCuqaoC1H63YS3wJ
+nSW3RyFgsQ0coQLsNn4KdD/3gtcauG0HOCItVgYH78EYq4fHWOFaDLA6tMNHe3St0m0L3+Ixln+/
+BqP3ib0xGue2LRQstmu+vXjz13mMZYRbubhoFw7yXyRYmdwrHMN7hR/fgVGSdrovVzvEUpuXYPhn
+wG9+wJcOaTDZ3GcOpU/fiACLmb3CP5o0ncemCcamQY4EK+PzWD3zYayNYvcwYUj0UiCldTf+9yXQ
+2RNlKl+6Aw2YLRCtU/D+uBZgxQDr9iIkrauIeo067OOu8Cfs38Fxgi9+XoKVyWCx+wBKG5t1tDfU
+9ME81hlybtki3U59w9XNuOVL/r+IJbu/58yXwOgGdPd0aXAuwXU384eAdT7YtzXqPPO+HuybPRdA
+9hnW5YDR2zz41ntnJFiZDBbbbnfQvUI7OBaF5bF+ZdwehALCj+4n2n9qLDkK/8zxMdSNjlA/3UP4
+vRFqsf4+xhG4V8h3G0sB+/4ptJjzB5luyDDV1otUVXd9vbGmpXFr09td96mXha5kT9Yb4psfbKxv
+EgMdDjZuE2MTzPfru/9eX/8HsabWeMcY3eBtaHrL+LiDjVt3B75v224/k2CNFL3+D/kbSLCkJFhS
+EiwpKQmWlARLSoIlJSXBkpJgSUmwpKQkWFISLCkJlpSUBEtKgiUlwZKSkmBJSbCkJFhSUhIsKQmW
+leRP28f50/H5EizLSlHEDC9jCuGxJ6crtoU7TkVjxJxkuGu+XVvNp9t0bS9SFu4Ra1+/PTt/c+R+
+uFLbfMJYtNvMbRk7nq34JFiZrPB5hYdsoKqqA9Sjfbm61ZhkOAdwG1D3IVd2WhJFGp4CB+6Xw8Iq
+kD6j0QbZR3D3F/he8CPjHT1s3r0EK8PB6rHBLARmby7kRm538i4QYP2Jag4dmwkOKkU69gjbqcEb
+rOddgD1sL8DDofu8D/C4/9gCyPHTrNVZp3oXixpZjCCVYI0gsHy8Tihjf1Rt+Le7pSWw2U4bjBZg
+faUEkRJ1QETZte8ShefDT3CxtukV1tXSQm6yBXf+d7Nc0T9o2/d4SUjCyf8iTJZgjTCwng2+FVKG
+janqMn9o3UgDLOKmy1g83NrKQ6zzwc493+/YFFFKpoAqIuk03/5dmoCP1g/00xKsjAerpIWLYzMK
+oDTw9ACfqgY2w7A8rCDpHEETzZb+kPgCeIpqAz7HOD0PI2yXMfYpUcS2gGosLwf7bq8G1zNuwn7D
+JFgZD1ZAFBWdTxVBcjZHezJFKFhPAfyQwLqDu0LOGCysmi8qHS0G+Dg6wR4qJHKCVy4ajWtn0lec
+SzvfDzczCVbmg1VQxWVgs2E6oaY/HgcsP3FVKvB6pGUDCLCu53aMB+eE0E9E3y9ntxet4Gh6a/QD
+q3Qi62UYyyRYIyzdwPt/O2/Xg+X4+oJF1bNhEV/k1YgWCVdIXvGfIupCS6Xz9/8+xQGQOwddoXh8
+ABqv/8JNf9/a2goQ0jWQYGU2WH7W0cbJ6dL6lLYNsVi3AnzNWHfwyXV7WDCOZyI4p7ptRvW/XdVb
+T8/B4P1TZtnRccFCWqoEa6RYrCvUfHPt5JhgfTeQ5uxobz1DVd7HElH0rIq/cb5wAx3yCLTDbf4z
+It1gxPElMAE7mCQqFS/BGilgIRiXdeDyTkoWsO7W1ihgvYkheCuJPz7nBDumUTbrV5D3NvOdT2VI
+j2O8hRudxz/8YT97EXL9fnSFz/nZq4FnpbA+z7yQYGVyjLXcAXb+MIFFEXmsIFi5gU6kv0tFs6OK
+eGsBf1iF9g9yhLnMz0vh+u/npd3VN/j7/EEBpWcCYMngPaOlqCWhSatd84tUteDGHZF5LAKLv+xR
+TeGLQ/N1dcZm8faGEjV/4VF0hCoHaaaqnOIrtYXivuP2MlBnBOvEq6oESyq+QobC9ER7vydyq5Eq
+CZaUBEtKgiUlwZJKnyqmlXRLsKRSrhJlBI5KlmClX+USLKl0qFKCJZUO1UqwpNKhZkVtl2BJpVzt
+qtIswZJKvRSlUoIllQ6wFAmWVOqlKkq3BEsq5apWyzokWFIpV4eiVEiwpNISZHVLsKRSrlpFaZBg
+SaVeoCidEiyplKthZGYcJFhpV4FSPgIHZUmw0q8KtFkdEiypVKsbwVIafBIsqVSrhNCq7ZBgSaU8
+gie2ytq6JVhSqVWVSlZLbeiUYEmlVp4ChexWebsESyq16qzgZmtahwRLKg1mSylvlGBJpVotQLGW
+T4IllXKrpYyAjKkEaygEmU+WBGtINE3J9AmHEqwhIwskWFKpV4mi1EuwpFIvJbMHAEqwhkrNme0M
++4Dl6+w4++rs7EnT+Q3R6SRysxm7hu3D5HQGC1Z3x7Kc8RNnX2XIds1VadXU8ebS7Ik2W+pHlfja
+Z+RMnBg4CVt6z+YqW+CHmzrRNr6x39PpUJQBPQjF10anY37HNek+nYkXm42Dp6N5O5MHy9eQs8Lt
+CqpufOirNGjtNaGv3POyWlOJVWeVbW3YCUysS+/pTHWGnc5VOYf7OcKCgSSzOm8cXxN6Au7x6T0b
+15IVoSy4LtYOJwlWs80Z/slnGSxaYUuZ1equ7XP0Zxcs1NJ+TqdNUaoSPZ2qyKM/u2DxCz/flwRY
+3fkrIz/57IPlqrumKjVcdUReJUMBlqtuam3co0y4sENn39M562DRV3oHDFZ7Tl+IhgAsl6smPxWD
+LFuiQXT2wXK5NtrinU5VGbQlcjreiX0/eQjAQhtcNUCwWi+OwtCQgOVy2gbPlWdetK8bCrBc7nh3
+broVpTyB09m6xGURsFxrywcE1oGov/nQgOVyOgadIVrisgxYSFb3IH1h41KXZcBybawcAFi+0VEJ
+GiKwXM6iwXHVNs9lIbCQrNiHWpFA9r09+q80RGC5VtYmDlZBdICGCizX2nWDSjPE+sWHCCyXszrm
+sbYqiqe/89FclgLLNa8lUbDqV7qsBZZr9mACeJvbYmC55nbEuWFY0s/pFNVYDCy3LUGwfBe7rAaW
+syR5rg6sdFkNLFdsZ+io6KesQ3uM5h06sFw1tYmB9aDTcmC5ViQ9Rao7x2U9sNYeiHW40/ob76e7
+LAeW62JfQmDFMlhDCZZzWrJgHV5pQbBim6zGfu7qdC+1IFg1iUwyyvKstCBYrquSBSvfZUWwlsS6
+xtv7id5vrLEgWHUTEwGr3G1FsNY2JTmgYbwlwaqrjToEprMdu4UFFQWxx89oLguC5Zp3IAGwprqs
+CFZNeXJgdaywJFiurOiDkwOKZdGWWBKstZ4EwFpiSbBcSSZJm93WBCvaLcP2ELBi5bnWWhIs94PD
+F6z85MCqqrMmWBdGM0mOAFexplU0bLQmWAn4k6yl1gRrYnJgLbMoWHN90buEhmL1DGstCtalIw6s
+iuEEFus3xFpnUbAulGBZGqwyg6uY4zkkWBKsZMDqNMDySLAkWKkEixcHiTdxVYIlwUoKrGYBVrcE
+S4KVUrBE+B77xqgES4KVHFj00ArFK8GSYKUYLF/cEEuCJcFKEiwevndLsCRYqQbLqyhx5r1IsCRY
+SYKF4XurBEuClXqwKuONTZZgSbCSBYvFe/yqBEuClTRYtRIsCVY6wGISLAmWBEuCJcGSYEmwMhGs
+JRIslFM3phzrOsQ54keHCViz9VFiI11fGe901kiLlW6wwOBJh/zYW10EwwUs0A2wIA5Yn4AVEixL
+gAUZBRa+KcE662A5UeZ7xrITN3I6hydYEafD/yewnBKsswqW8xOA0jfRms/RItxM9oo0HMF6lB95
+qVO4c+PM5vKVKyRYaQeLWyYOVo0uIIK7Xa5vGosPDTew6GwEWF8Vp6MjTuKK4WRJsM4SWKYQrEkA
+ZKwuIYwESxcu2TS8YqyAVrrcAJNx3RaACUZc9f1S8oEyxjrbYNUA3GEE658nyAqXOodd8B4C1hf0
+vG/Tyq/i/25yiStl8D40MVbIi0K60Emzhm+vcK7xoo5e3CA84b0SrKEBy2m8GId/vxgIroY3WFt4
+wPXo5fxs7pVgnX2wTFdYQ66Qa+MlwxgsdIWbTFco3l5TALl11gJr49xJ+Zfem+nphgIRvF9EXUWA
+q3HxWwZYzmEIVmjwjl1BKrl1OYyzFliXGB3Xh1IOVs0NULppoGD54oK1ZlL+TcmBZYby+sO8a8g1
+ziUyWYmCNQlqBgpWd1ywHr08/xpnUnksI91AOQZ3gVii1RTI5z2UIFg3wNI0gvUFgM9sqrkHD6wu
+xWBR5kindhwQWNOUKl9MsP7VyB0klXkX6Z6QBOksc22CYH0ZBg4WKNXdMcH6ajBlO/AEKcdpFh3f
+lot0I8Ry8UB+ZWJg3aOnE6y6POCPqXlUh9tSDNZFUOz8NBS6BwoWKoytIFiI6t14oNclBlYqFAoW
+IZgEWKgwtoJgoXn5TE0BfDIxsFKhULC+gDSmEyxdXLimq9ENr1in67xTXhxYC6V1Bueom/iuOl5y
+t8UC69FR8DDyqn87CbDC2AqC9W90OP8Gk4YELPScyYIVxlYQrG9SBP5lXXcOAVho9wrTChZ6F714
+ZRhXSNbdBJzQVdyaBVzHp43VpS6xSaQDDYK1ln6xLaH2ZUBgBdkKgnURXEgxd27dkIB1t2sQYAXZ
+CoJ1Azm37+uwaUjA+ow7ra6Qmp74mOcMmq8vQK4bF9H5110CY92uFaDjXl+dh32PFWi9hdm6jbbW
+H6qJ6QrX8r1CDeLEhgQU0hIGW0GwdAKrJhTmszuCNBys2fUJnI4adjrEVhCsKwks/BU3DokrdKUZ
+LIxkddMerRFm+fuj4A4836uIIKIDadJu4ZcVgja5Tti5c4m90jgxlgnW7CAFSjKq6gMWWAOsS5M6
+neogWJcSWO7MBQvbiiei5xFBhm5Caua6XIaxKuC92eJNLmMtIiiM2uwEwJo1OLCmtVvVYiUFVmXn
+yLFYwiNehE5vBeUHuOaGgeW6h/dt9W8PEKw+MVZ3vwqNsYgq68RYfcCa60vgdCCcKtbHFQ5RjJV2
+sJaCkWnCBfeaYA8lHCye7dRhXogrnFwXoCxGr1AfVK/QoCpar7DYZRGwBhS8V3b27RXqQ9Yr7B+s
+jsGB9X262y9uDlxWh/ZlFrbUo6VLnSFg1WFHG/faMgrj9jV83GUgeI8Hlisv+TxWkKrwPBbEymPp
+ISOv+tOWgn43ASMZmTKwKjti5rH08/rJY9WJzO7Fse8uzU00uz0QsMpaB515N8YifttMUgHkhoIV
+SEKQC7oE9JB0Q1ywRJbiNtfAwZrW3h098/7pWJl33XTi/YPljH/bmSs/pWBVdsTIvFOO0ribHBus
+uov4uYWl6Psm5VMPVr3SOLgYy8CmeFPwRbEz3BWKtYWbAglS/SZX/2Ald69wWjhVCd4r1EOzpmkD
+S9cHDJajsiPuvUK4qr97hV8QRIVb6tSApccDq7Vv+biBBu/OkPkewQkf5n9ha8OWnVHmtwx6dEN3
+UqMbQsCqyZ90zyTRFf3ipPzZnGy0clvmTip9iC+izSO79uiVBcaYjnxw3TPpwltMdC9cEgusCAd0
+dkY3mPcIL9dzuSOnkxK3mddcWZA/9aEgWFvmFly4xEDm0UmznP3dhA7/7gv7lo9THN0jfTxWKFim
+uzScfDF/W7y42ozGzFvSfMyMGZ/R3gVmZGAZsG7g8z8CSUdxeDRmRozug3NNsIzzXcvBmgR5mwYJ
+VjkFh+0SrFCw9E/y4VaFaylDV8xpKtxIMR+a2Ro+k/DLGDg715iDSOGmGgzfruW4Xc9XWwesOqLl
+QmO83Fd1KN1Y8zli7Vu6fq9z4yQaJcPBwrdmbdp4ER9IQxHZeXWDBKuWdzuaRzpYgU4hgkPjBWqM
+7u73aaSMDvS83G9yjJwGTNfxZbrhLpb58CyA8wSb1gHLmEEIGh6p8xJ+fM4r521y1XzxXpcxNpnA
+cn6Cj17EUP9eAuu8/mOs/sBqNe58jHSwzE5hjRhz5TSGXrnoRxYjsraEgeUU/bxP0p9NZorB2MlS
+YGEwdZHRwXZHDrZaczkYYLmN+YRz4bw6BOvewYNlPiGvRLpC0xWGdf4IKmMudBhYhgpNyAywnBYE
+ixz4F3XI+3ZY3Qa6HUJpCAOsQCpvVF3MAcoDA8t8Ql7gaQgSrOgWKxwspyFzPoVVLdaauWvNVPZa
+d8g0588BxlhiXrRpscwzShFYtYG7Bi0SrABYGGNNDomx+oJ1XUjeMwSsqy0GlrsAxvKFbyFYGGNN
+EIHUBMMrfisQY10iDt1IfaYCrNbgXc5aCZYJFvX7Jm+iXmGhKxKsux+l0fPXO7d8EfKvDgPrX83O
+oqXSDYUr+QCUUS7R9auhwArByuWnhwwFe4Wue4KT7gcNFgu5f14uwTLBMge7FrrCweKBvlGhxZyo
+E7RSYvVtVoqxPgGBCTmBPNb15tLkAozTRR7LeCt3U8rAKguC1T5SwQreJKwxK0TiVT5J55lpfJvW
+GbUjt1yuz+aZd9BmG+8Gt3GtmaSXbnLpVgret+B55M9+SBzKlhsgV9xOoCNd6/qEPoGqSNaJt/RL
+HxKZ95SAVRvuCeVM6NRpZBe3NYMsn5xiL8FKJVgs1A9KsCRYKQMLg6xpXkWpl2BJsFIKVi09H09R
+CiRYEqyUgtVBw2YqFaVj2IJVKcFyWfXJFM2K4hmuYHWoEizLguUz0qPDEawyRYJlWbBoGkL38ASr
+Q1HaJFiWBavBvAs97MAqD/ZoJVjWA6tNUaqHJVgdNONLgmXdx8opijoswaJR+yDBsi5YZsJhmIHV
+wW8bSLCsC5bHmFMxzMCqCBv+KsGyHljtxpSK4QWWMFhh04wkWNYCywyyhhdYFUbZDAmWdcEygqxh
+BVZnn0lGEizLgYVBlne4gWUYLEWVYFkXrHaRyRpOYHUGRlVLsKwLFgZZZRYGa3x0722oNdZJLbMo
+WLMzC6wZ/VQtI7CWWBOs/HgGyxyw31cPuq0J1vjkwGq0KFjl8Q66mo9PzppnTbCmxzNYsW/qtFnU
+YuUkN26xc601waqPd9Beng/Kml1nRbBqlvWtsuapClTYj3lTp3OpNcGakRxY7BpLgrXCy/qN3rNi
+O4+hBGtljKExtXjQVY7Y0Xu3zZpgtSQJlm5JsK7qZPGj9woEy7vUimCNj8GN6BF2x45YKtxWBGui
+L0mwqjZaECx3fvyDBsoHZbHxddYDa2NF9ENuDYx8jTkOcK4FwaorYMlqqgXBWtEc/5gr6erPYo0r
+rAfW1JhGVunv2tfc1gNrbmfSYE2rsRxYbls/x1xL3cIsxmLxM3RgbVwW02CV9NuRutJyYLnLWfKa
+aDmwlnr7OeRmuqmDYLXMsxpYWuwIq/9rv95pNbBs3YMAq3ajxcByl/V3yHj9NxBYrHqltcC6qj2G
+7y5XKhJoCsVtLbDmtrPBSK+xFFju/i8Tnm/I4jOqaqwE1opt0Y+3Je6g5JC5bTluK4G1opENTjZL
+gTW1td8D7qZ8AweL5TutA9bKZTGvg3gTv0J7hqPd1gFrRfUguWL+8RYC65rdifgMDIUFWKxko1XA
+WrouNleJtlFnVG84JGDNa2CDls9mFbDcF7+SyAFTIivLzMQtsQRYdeO9MQNCpXIATbHWEmC5x7ey
+FMinbbQEWHVKYuFiuaIEwGItORYAa60tRpqqakBcoZr6HvzZB2tFTgdLjWonuoccLPe8GxPs3lYq
+SndW8LJYN945pGDVrc2KYa7aoCDOUJkY7vDGqe4hBcu9IquNpUydkyJGC5xtsNxLshLu3aIZ6MwK
+Pfgm29SN7qDG/9ydVm28JuTFivHj26JfEB0l2B1UBu5TOmpzZteEfMPE9J6Ne6or5MXS8eMPs5Sq
+Y5ntGudZPJ0lK4LLdUtslw4gaVKtKB1ZEUd/eOvCS01pl6ZZ+ebC3GVN7TFSn94CGidTltxd3I7D
+62688mydTsjnL/O2d7LUq+PAA5eetdaZdKG5dOMDLe0DyvHSPZ0sZmV5y8IrpkoNC9VbGqz2anSB
+NLSvoE021fBSg6K0WROs1uoCY6xoWUOHbCgJVirUVlUgLBWG7M2SquEoC8ZYLWXGuPYSpT4t8a/U
+WVCUXuHQqkpV+FOrobHdJ5tnWIPVaSGwqvjseaVaQjXchS3pswxYbdwH1sugKgNUEXqvcIjlAap7
+JW1VRqjEOmB5MFwvl1hliGiqujXAokExHtkgmQNWpTXA6lQKlGbZHpmijsCYdwsEe9WyPTJGLYrS
+aAmwOhKcJSE1PNRIjz2xAlhV5YpXNkfmqIrK21oALF/ch5hIDTuBqN1ghS6hjLAySD5RxmjoD6Q2
+8LhXqUyQl2J3K4BVEO/hOFLDTtV8YvHQg9WtqOWyNTJIojje0IPV2W8xNanhpLYy/pSmoQfLfFyU
+VMZ4whargFUrmyPTPKEFwGqjMl1SGdQnrLYGWL7WVpltyByVG7NAs+RPIZVa/yNuo0iwpFKpShG6
+JwCWP4FPC27TM9AD6Ym+m182UUp0tn9HNFhGTftIsDyqkQZXVPEknu3zdVWbsbnvIR+7vUjVFu4j
+Jj7MUkm054YiNX/ZUbFnma6WrO6740Gb+IpD+MkzdoiVG0rU/DtPibWAn3B6xCNRFmwIUbniNfy9
+HTOWnYqGz1Pmxo9NdzhmPE1LO8t0rWQ1geXfH/JDB/puqiGyLxum68Ze2BB2beGJnqSP2jRYfcEC
+83yA+mpd04FmOQAUHo3Y8KAOqmID/Q90zhqQVNY7Exy4tUYb36/hnhpcH/ndvVOAPyH1VTtk4/tf
+o1XT+WcVcupwUaPFkR4Emw3hAA7WBgf+MPjL5L7Ul6tDYGy8gFoL4BvM/4wDf13gv/5+vuj4Qdg+
+KhhCDhabezF2K7afTbRfMmpWppkDVfoBaw7kPO9jPXtzYHLEht+FcSeYbw5chsu7wNbWimIvQu4R
+5ltM53PcBt/zs72a43fh++2fAhysro/Aom6210bv/xhmdLL9NvWHjH0JinFRgx9KsMLAegbgEew8
+Hz4f7H3syU4wwPp/GjzP2FOQd5RdADf72c+0vLcYmwn3+tkL2qi3Qvdp5VoOE/zsTQ2ew720vD/j
+Vnl7mG8B3JZkBz+kMFB8sF7TdHGBYFP/lEKzqsDQ9NunP0BZC8jhkF0mVl4BtPLvNvt77ECFfhoN
+cRasY69WVf2ZsWMPVG1lbL4KYzlYf9X0dxgxtYx15ehv0Lm+3clYNizjX75MghUG1vlGY6O9vxr/
+q68KFs6cDo5csfH2+dl+P+tVoY3RP8b//tNGdCFev2QfPFBFrbihqlLEXm/qo470sGa+F277CrsL
+rsPVv9Wy30s21RAYABUfrP+A85iJzE18ZUSS/H9hHP49Bx7Y+WATIyyqxb7/bYTk7+fA91jvR8je
+fRZGY3ygaM+3cbBahUNshQlo3EazXdVbT9DrL0EpWjObtFjhYP0JHCeE2/sOjMKlSgiOCFFK9wVf
+4m/+Tw3eRouFru9Nsli/EJgsh2sZ+wrkveV/hlsoxmF7OriXDfagg/olo0U0XkmoUVEcLDZYjuoq
+VLWDwPo4PBIgaAKdQ8SQvJOj4BbGPrBxb134FvsYt1hdWfC4scHPwP4Gt3dPvyhsXpvfQOqvoNP5
+vgpj0XgVLnAAOOgsj+fAwqrpUCxjLHBU8YYAAus7kG108Dg2vC6xqbfDOUN6sk+xF2z6sgd53PSE
+2HUVNWDXGDj3Q53bPGGZToXu9Q4bA1TGvZeM18DVGlYhry9YATWQBdpqrBc+L0IY2tuPoMO0QfHu
+XWSW/gPGYn/uZQ0M/l6wwSLGY8J8HS41D4CDhTHYN/hFo7EDALk7WpaDg8h7ir46SoQ68sAKCFur
+IkiOg8CKzB6FgLUe4EcijgcYi+A8KN6rogb0v4DRP2QbUdocvqHQUxpZL7sgKimwOsLnhvYFS21t
+QbUqkWCN7vNRJ6eA/izFbIep8uwhjNNP5kBh1e06YGBF9vUZJI5fEyfRpuW+EwYWGjO0TWXAwdJ/
+YnrB+0Hb0XKfpv9UgmU0BJbt7hUAAAvPSURBVAfr9gTB6mH3YVfQTxfs2N0tMyHnRBhYgrdfi23f
+tI06Yu613gGz/ATW7mTBosA9dJRK/BjrioAr/HEg2gro2BSw/zokjZAFm9mhMQ5wzLoCAys8WrwK
+ik+ZfUhhukLAIuwge7M2Dl2h6udeMZcds+m/YRTbTZZghcZYQVf4N97TiwFWD4ZScIuf+of2oxyj
+O4KukDfgnzQ0WGKn++BfTK7uEnsZrrCLwq2BclUWMayuv+D9XAqH9jGMnh6J5KoIcvaF5dyA0qgH
+WtrYKP13wrpeb/wax5AhnvEKBYsda209cQBmoVfkYB1AsA6I9w6AJsEKBetvGFmh/3qeneERVEyL
+tRx0Ho+vMs2UzQze74LPi3hdJKy4J/ylsTty9XjIqn/mDDh471SVaeGPkowP1n4bueHP2m/ZzoPw
+sPhqCow10J9TcgsPmvTfdXqf9NNSDv7FaP0b5hUxEwp1yPf7Q8HyNnq4Kfsa682B33CjeC6F9PQ9
+f8SQXoIVmm6YQhmdX6jFe3X4AYsJ1nrIEx2+JwR+y9FMYdeKTNwF8HsRwY4FnduDDwJ9P1z5U9OI
+kVn7Hy17gLeC2qgGY/cAwMIj1Vef6L0PIz5+U6eq2hsSIy6sRlVRj1HfwY4tQPd1yIbo49LX0Bzl
+QC69X+2hcEr/DfYMbw6zWN+F/CNsly33HT++n7+H4U/2DdaVQ51LXFwowQoD600NFu5hL4MOY6nR
+G6qrooCFG43lv3n7u7nwtVNsu07x1AIoPYHNRR7wXR1uRotAeR/yliLqfTPX2KsNwy7HDnZwSqBT
+n3DCXVGmRVSC7wcsdp8GqupA+5m/2R+ax3rfZnRZcPNetK+qCqOPUOxNS6V+sj+GqsgRLqLrwnCG
+Aiw/kqerDpVHaYtpEQr93EbS92knJFjht3RetuMPw2/E3HkkIr8QeLnA/M3bKIClrSkWOa7TIv+h
+MZo/RVc/XeL/CdmnTUcYuLuznpobxp0a0KFWRnvQUVbfJJcBliJuQr/+WJGiPdAyBfLeCM1jeRVT
+9GpXmZK/mTqxPTunKzOa6Jo6x3y/qmuMMprWzFFs7xn5DhFi3We33WkEorumK8U7uP099mQRLp4a
+6VyxacGGEMmhY9vLsm0Ln7/LQb6wPHzKXIV4+RHzN8de+sFVevaM53lO9dgG3XYnub/1ikJ5nKcU
+Bd3ig+ZHBPYib7R3fnb+5u6B3IRudSjRxgAnPGxm552Jf5c/ua3kWJlE9PpMS111vHJslEc8yIF+
+UoNQgwLoBqOVYpRgSSWtRipIDC1R35NgSSWn7lpR5zpG5VgJllQyaq0UPbOYTw+RYEkNWG314sE0
+1XHm7UmwpAYkX3MlUkUpBk/c8ukSLKmE1d5YaT7ur7q/h0hKsKT6V2erp7qiIJATr27t/0m+Eiyp
+aGrxNjd7GmurqyrLSxziOX9Clc2JPUdZgiUVTaBECFeU17Yk/nBuCZZUNBWEMFVQUe1paRvgY0kl
+WFJRXSEfFt3W3pHsY24lWFJpkQRLSoIlJcGSkmBJSUmwpCRYUhIsKak0g9Vab0zwqq3nQ057vQ1b
+m96OuuvL9XySoZ+1NG7b7RcTO7z1TebErdcbt/WtAHAwuPJg49am4LQA39Z62RgRqq8X2UmP0SYH
+Guu3RS+q8O5WsQW2RQNuwtuCWiV2U9TWG2o3WlDs5e/11jeeSAdYEfMKt9tpTqFaGuW7juXwSYb+
+Y9NVAIe2B49rfx5ubeNzvHuX22i/8FqiYmXhW+Yi2AKVMReb8+6lAnKAGEgnSs3sn0KzCtXRf4iy
+5QLRav69OpWDKj7Rw96fSa0yms95vs/GV4btEVIq0r+3iO91BFvwNWpB5fG0g/WyBouamh+zw8V9
+djw5EzhYvRdA/jbPdBj9Hk1MLW3aYHM820OgFDY9aaPqWSFaD7lbPTMh30+Tox2rmxeICfWMV0KU
+YMUF630dxm1tbiwC+9tnIjdcr4lWw20ubmoEGOdH1OybPUU0PxV/dftWXDw3bHaduAuoQd4+KpqF
+exXBuNO0iC2oOX6fbrCuAF71+GUtL6KSKNuZBwKs12xU1eGkDb7HvstrxPyWivy9puHJsf+dsSh0
+n+M2eBZJ/Bh87wz7GE2O7rIZ5R0O2SRY/YD1HbATGb1TqDJfmF6badYg/Y5qP2HU8RtFk+vf1ahg
+5Bh4iTO3L5qlQ+P0Pzaaa/+uLW8PewJoavEGXmQvrWBlGzVmmprbOOWBQpFesD+icrA6W71i82qE
+ZR1dNlRR9Me8tB93f3OU0afRrimj/X8FlVzji8TUOXyDLF40mfk+kvusBCs+WBVGISNvM9XkDJ0J
+rUDpjaLV2luahZtrYzq0MlGN9C/aqKN+ciE/YF15Ctqt9/lf0lNU25YdNveiGqQPMdbzF9uod9IM
+1q2Qu/lEyBkEAuzdq98KK0iKJucniOE6sdkP0dT98LEi28I96PePU6mAn4H+UmjZUVxRfITt0kQN
+m8Xw+AEJVhSwOoNg/QrgzmAEHlq7YeHz4aUcXgC0WAvgslOiEsh/CiKpGhYV9HuWikKKNv1wlB60
+Yi9Q1eSP8zJGH+bk/SENYBlDvHipyIPZ6KJmrDNOyNPcGuamg2D1ziS/fgUPqdArbkbzS1Xewf4c
+vy7053gditc0HlL9GHLxstgAdkXTnhMBVilrk2BFActsCsJmOjaFtszoSHubPaFbhoJ1vIjs0MkF
+oCowDsF5DLJp9SpeknEBZG/XzKJF60OK6Z2cQnvpyVf0GxhY7OAC6rw5tOei7BoEqxej8F9TKObY
+wU4uB/SK2aA/z3z3UUjPus7BjyhGJ9h7Dsw4wfbmIEPYl8TvUeFOvx+tXf5pCVa/YPVu4D05ZXWU
+EhchYCFXo45QTw93duAl7g+UiqSm/ruOH2E4wt4xwcJ9yNWofURUiwBrd7rTDeiBPbdnO0B9Lg5Y
+vpmgPm3UKcSzKcLTGWUaLyqrvV8Dx0uUJTmETClU8IhgW3SKvf4R3OzkmFw8pXYJVnxXSL+z97E8
+ozRRTLAO6ZCNsfoHOmz2U52xl9BiKUGLRUXW7EdEzvG3WraZDTpWJKp+ptVihYPFj2Hv+dH6CSZY
+vinC5VFfcboyY88V8N/oFY2C7xR1vaoB/Jp/0LFVDu2BV7QJ9PiAf/A4fhzaKsgm4wVKhWQpTh5L
+6PBiyDsRGyzkitfvNAKr5RhYhcRYIq+jG2DdBXeYNOZBDjdeIsb6IMk674mDdWDVFNE92AW2mGCh
+FdVCe7JdOXazV9ibRVVuu8ag+R0d7Ge8CnMpjqezfR00AstQpWQpNliPlf1cOLB4VZOP6/QgGhao
+wb0Kctifgr1CwxUaddXGmHYJvee4I0aamnqFf7LZ09wrxL7encYXxrZYiyHXeKbPX8vz3qFIazLF
+6WOPUoVu9Q1ebnKHqPf+lRL6Owc7kGixqMb4rTCZdXhI9eBo9kqWYoM1nUprM+pOx7FYRfBR4Sd/
+oelHeMD/eQLo14E8lgjeeWb9bwG7NF2Un2QskMc6L915rPsBCmsbn5wOKsVIEU8F52Cd2asZ4X41
+FRDN3/aY3f4Sz7xrW58cBbPQQFEW9Ble1f5F0Fc3zOePnVhMi7drjh8ZaWQZvPcD1ssOyFm3rWG5
+g9d5jKjoJ8A6Qw9fEBX9eqfg1g0XYBx/hjLv6xpE5v1n1CP8iqhua1RTZmeeMffyknOZsW2VI/2Z
+994N2fxeofZ8RB4raLG+ZDoyDKr2Z9P9Px5v9S7HqEmddYr6HsXcNo0+KlbaZ5GB66EbWJD9tPlh
+Eqz+YqxdOvUKHaJXGL0G6cxgDdJj/F5hDm+39XRfgyruoyO8mSfvP3oq8CgU8iDB24YH6bah8jRL
+PVhtnkax0OjhSavelmZPc1vYKlONnhb+1xC96PV6dpsjFl5vbqL9Xvd46Kazr8lDHY4DYiXpIG4b
+NOroECVJkRe5R/QKvUabHPB6ml45FbbKkPHSbApPB/+pPa8YHu5gcxMfvOD1eGj31zweDNNagi1t
+iM9GbfE0p2V0g5QUk2BJSbCkJFhSUoPW/wfr5tj8wgE+HwAAAABJRU5ErkJggg==
diff --git a/Documentation/DocBook/v4l/.gitignore b/Documentation/DocBook/media/v4l/.gitignore
index d7ec32eafac..d7ec32eafac 100644
--- a/Documentation/DocBook/v4l/.gitignore
+++ b/Documentation/DocBook/media/v4l/.gitignore
diff --git a/Documentation/DocBook/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml
index afc8a0dd260..afc8a0dd260 100644
--- a/Documentation/DocBook/v4l/biblio.xml
+++ b/Documentation/DocBook/media/v4l/biblio.xml
diff --git a/Documentation/DocBook/v4l/capture.c.xml b/Documentation/DocBook/media/v4l/capture.c.xml
index 1c5c49a2de5..1c5c49a2de5 100644
--- a/Documentation/DocBook/v4l/capture.c.xml
+++ b/Documentation/DocBook/media/v4l/capture.c.xml
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml
index 9028721438d..a86f7a04552 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/media/v4l/common.xml
@@ -236,7 +236,15 @@ important parts of the API.</para>
     <para>The &VIDIOC-QUERYCAP; ioctl is available to check if the kernel
 device is compatible with this specification, and to query the <link
 linkend="devices">functions</link> and <link linkend="io">I/O
-methods</link> supported by the device. Other features can be queried
+methods</link> supported by the device.</para>
+
+    <para>Starting with kernel version 3.1, VIDIOC-QUERYCAP will return the
+V4L2 API version used by the driver, with generally matches the Kernel version.
+There's no need of using &VIDIOC-QUERYCAP; to check if an specific ioctl is
+supported, the V4L2 core now returns ENOIOCTLCMD if a driver doesn't provide
+support for an ioctl.</para>
+
+    <para>Other features can be queried
 by calling the respective ioctl, for example &VIDIOC-ENUMINPUT;
 to learn about the number, types and names of video connectors on the
 device. Although abstraction is a major objective of this API, the
diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 9f7cd4f2579..ce1004a7da5 100644
--- a/Documentation/DocBook/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -10,12 +10,10 @@ driver writers to port or update their code.</para>
     <para>The Video For Linux API was first introduced in Linux 2.1 to
 unify and replace various TV and radio device related interfaces,
 developed independently by driver writers in prior years. Starting
-with Linux 2.5 the much improved V4L2 API replaces the V4L API,
-although existing drivers will continue to support V4L applications in
-the future, either directly or through the V4L2 compatibility layer in
-the <filename>videodev</filename> kernel module translating ioctls on
-the fly. For a transition period not all drivers will support the V4L2
-API.</para>
+with Linux 2.5 the much improved V4L2 API replaces the V4L API.
+The support for the old V4L calls were removed from Kernel, but the
+library <xref linkend="libv4l" /> supports the conversion of a V4L
+API system call into a V4L2 one.</para>
 
     <section>
       <title>Opening and Closing Devices</title>
@@ -84,12 +82,7 @@ not compatible with V4L or V4L2.</para> </footnote>,
 device file. V4L2 drivers <emphasis>may</emphasis> support multiple
 opens, see <xref linkend="open" /> for details and consequences.</para>
 
-      <para>V4L drivers respond to V4L2 ioctls with an &EINVAL;. The
-compatibility layer in the V4L2 <filename>videodev</filename> module
-can translate V4L ioctl requests to their V4L2 counterpart, however a
-V4L2 driver usually needs more preparation to become fully V4L
-compatible. This is covered in more detail in <xref
-	  linkend="driver" />.</para>
+      <para>V4L drivers respond to V4L2 ioctls with an &EINVAL;.</para>
     </section>
 
     <section>
@@ -2367,6 +2360,16 @@ that used it. It was originally scheduled for removal in 2.6.35.
         </listitem>
       </orderedlist>
     </section>
+    <section>
+      <title>V4L2 in Linux 3.1</title>
+      <orderedlist>
+        <listitem>
+	  <para>VIDIOC_QUERYCAP now returns a per-subsystem version instead of a per-driver one.</para>
+	  <para>Standardize an error code for invalid ioctl.</para>
+          <para>Added V4L2_CTRL_TYPE_BITMASK.</para>
+        </listitem>
+      </orderedlist>
+    </section>
 
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
@@ -2472,6 +2475,9 @@ ioctls.</para>
         <listitem>
 	  <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
         </listitem>
+        <listitem>
+	  <para>Flash API. <xref linkend="flash-controls" /></para>
+        </listitem>
       </itemizedlist>
     </section>
 
diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index a920ee80f64..85164016ed2 100644
--- a/Documentation/DocBook/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -51,6 +51,10 @@ readability until any ioctl (querying the properties) is
 called.</para>
       </footnote></para>
 
+    <para>
+      All controls use machine endianness.
+    </para>
+
     <table pgwide="1" frame="none" id="control-id">
       <title>Control IDs</title>
       <tgroup cols="3">
@@ -325,6 +329,22 @@ minimum value disables backlight compensation.</entry>
 <constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry>
 	  </row>
 	  <row>
+	    <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_CAPTURE</constant></entry>
+	    <entry>integer</entry>
+	    <entry>This is a read-only control that can be read by the application
+and used as a hint to determine the number of CAPTURE buffers to pass to REQBUFS.
+The value is the minimum number of CAPTURE buffers that is necessary for hardware
+to work.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_MIN_BUFFERS_FOR_OUTPUT</constant></entry>
+	    <entry>integer</entry>
+	    <entry>This is a read-only control that can be read by the application
+and used as a hint to determine the number of OUTPUT buffers to pass to REQBUFS.
+The value is the minimum number of OUTPUT buffers that is necessary for hardware
+to work.</entry>
+	  </row>
+	  <row>
 	    <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
 	    <entry></entry>
 	    <entry>ID of the first custom (driver specific) control.
@@ -545,6 +565,10 @@ may not be supported (<constant>VIDIOC_QUERYMENU</constant> will
 return an error). A good example is the list of supported MPEG audio
 bitrates. Some drivers only support one or two bitrates, others
 support a wider range.</para>
+
+      <para>
+	All controls use machine endianness.
+      </para>
     </section>
 
     <section>
@@ -670,7 +694,8 @@ caption of a Tab page in a GUI, for example.</entry>
 	      </row><row><entry spanname="descr">The MPEG-1, -2 or -4
 output stream type. One cannot assume anything here. Each hardware
 MPEG encoder tends to support different subsets of the available MPEG
-stream types. The currently defined stream types are:</entry>
+stream types. This control is specific to multiplexed MPEG streams.
+The currently defined stream types are:</entry>
 	      </row>
 	      <row>
 		<entrytbl spanname="descr" cols="2">
@@ -800,6 +825,7 @@ frequency. Possible values are:</entry>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_AUDIO_ENCODING</constant>&nbsp;</entry>
 		<entry>enum&nbsp;v4l2_mpeg_audio_encoding</entry>
 	      </row><row><entry spanname="descr">MPEG Audio encoding.
+This control is specific to multiplexed MPEG streams.
 Possible values are:</entry>
 	      </row>
 	      <row>
@@ -1250,7 +1276,8 @@ and reproducible audio bitstream. 0 = unmuted, 1 = muted.</entry>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_ENCODING</constant>&nbsp;</entry>
 		<entry>enum&nbsp;v4l2_mpeg_video_encoding</entry>
 	      </row><row><entry spanname="descr">MPEG Video encoding
-method. Possible values are:</entry>
+method. This control is specific to multiplexed MPEG streams.
+Possible values are:</entry>
 	      </row>
 	      <row>
 		<entrytbl spanname="descr" cols="2">
@@ -1406,6 +1433,959 @@ of the video. The supplied 32-bit integer is interpreted as follows (bit
 		  </tbody>
 		</entrytbl>
 	      </row>
+
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">If enabled the decoder expects to receive a single slice per buffer, otherwise
+the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs.
+</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Enable writing sample aspect ratio in the Video Usability Information.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_h264_vui_sar_idc</entry>
+	      </row>
+	      <row><entry spanname="descr">VUI sample aspect ratio indicator for H.264 encoding. The value
+is defined in the table E-1 in the standard. Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED</constant>&nbsp;</entry>
+			  <entry>Unspecified</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1</constant>&nbsp;</entry>
+			  <entry>1x1</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11</constant>&nbsp;</entry>
+			  <entry>12x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11</constant>&nbsp;</entry>
+			  <entry>10x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11</constant>&nbsp;</entry>
+			  <entry>16x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33</constant>&nbsp;</entry>
+			  <entry>40x33</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11</constant>&nbsp;</entry>
+			  <entry>24x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11</constant>&nbsp;</entry>
+			  <entry>20x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11</constant>&nbsp;</entry>
+			  <entry>32x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33</constant>&nbsp;</entry>
+			  <entry>80x33</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11</constant>&nbsp;</entry>
+			  <entry>18x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11</constant>&nbsp;</entry>
+			  <entry>15x11</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33</constant>&nbsp;</entry>
+			  <entry>64x33</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99</constant>&nbsp;</entry>
+			  <entry>160x99</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3</constant>&nbsp;</entry>
+			  <entry>4x3</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2</constant>&nbsp;</entry>
+			  <entry>3x2</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1</constant>&nbsp;</entry>
+			  <entry>2x1</entry>
+			</row>
+			<row>
+			  <entry><constant>V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED</constant>&nbsp;</entry>
+			  <entry>Extended SAR</entry>
+			</row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Extended sample aspect ratio width for H.264 VUI encoding.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Extended sample aspect ratio height for H.264 VUI encoding.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LEVEL</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_h264_level</entry>
+	      </row>
+	      <row><entry spanname="descr">The level information for the H264 video elementary stream.
+Applicable to the H264 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_0</constant>&nbsp;</entry>
+		      <entry>Level 1.0</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1B</constant>&nbsp;</entry>
+		      <entry>Level 1B</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_1</constant>&nbsp;</entry>
+		      <entry>Level 1.1</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_2</constant>&nbsp;</entry>
+		      <entry>Level 1.2</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_1_3</constant>&nbsp;</entry>
+		      <entry>Level 1.3</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_2_0</constant>&nbsp;</entry>
+		      <entry>Level 2.0</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_2_1</constant>&nbsp;</entry>
+		      <entry>Level 2.1</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_2_2</constant>&nbsp;</entry>
+		      <entry>Level 2.2</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_3_0</constant>&nbsp;</entry>
+		      <entry>Level 3.0</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_3_1</constant>&nbsp;</entry>
+		      <entry>Level 3.1</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_3_2</constant>&nbsp;</entry>
+		      <entry>Level 3.2</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_4_0</constant>&nbsp;</entry>
+		      <entry>Level 4.0</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_4_1</constant>&nbsp;</entry>
+		      <entry>Level 4.1</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_4_2</constant>&nbsp;</entry>
+		      <entry>Level 4.2</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_5_0</constant>&nbsp;</entry>
+		      <entry>Level 5.0</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LEVEL_5_1</constant>&nbsp;</entry>
+		      <entry>Level 5.1</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_video_mpeg4_level</entry>
+	      </row>
+	      <row><entry spanname="descr">The level information for the MPEG4 elementary stream.
+Applicable to the MPEG4 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_0</constant>&nbsp;</entry>
+		      <entry>Level 0</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_0B</constant>&nbsp;</entry>
+		      <entry>Level 0b</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_1</constant>&nbsp;</entry>
+		      <entry>Level 1</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_2</constant>&nbsp;</entry>
+		      <entry>Level 2</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_3</constant>&nbsp;</entry>
+		      <entry>Level 3</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_3B</constant>&nbsp;</entry>
+		      <entry>Level 3b</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_4</constant>&nbsp;</entry>
+		      <entry>Level 4</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_LEVEL_5</constant>&nbsp;</entry>
+		      <entry>Level 5</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_PROFILE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_h264_profile</entry>
+	      </row>
+	      <row><entry spanname="descr">The profile information for H264.
+Applicable to the H264 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE</constant>&nbsp;</entry>
+		      <entry>Baseline profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE</constant>&nbsp;</entry>
+		      <entry>Constrained Baseline profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_MAIN</constant>&nbsp;</entry>
+		      <entry>Main profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED</constant>&nbsp;</entry>
+		      <entry>Extended profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH</constant>&nbsp;</entry>
+		      <entry>High profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10</constant>&nbsp;</entry>
+		      <entry>High 10 profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422</constant>&nbsp;</entry>
+		      <entry>High 422 profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE</constant>&nbsp;</entry>
+		      <entry>High 444 Predictive profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA</constant>&nbsp;</entry>
+		      <entry>High 10 Intra profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA</constant>&nbsp;</entry>
+		      <entry>High 422 Intra profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA</constant>&nbsp;</entry>
+		      <entry>High 444 Intra profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA</constant>&nbsp;</entry>
+		      <entry>CAVLC 444 Intra profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE</constant>&nbsp;</entry>
+		      <entry>Scalable Baseline profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH</constant>&nbsp;</entry>
+		      <entry>Scalable High profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA</constant>&nbsp;</entry>
+		      <entry>Scalable High Intra profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH</constant>&nbsp;</entry>
+		      <entry>Stereo High profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH</constant>&nbsp;</entry>
+		      <entry>Multiview High profile</entry>
+		    </row>
+
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_mpeg4_profile</entry>
+	      </row>
+	      <row><entry spanname="descr">The profile information for MPEG4.
+Applicable to the MPEG4 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_PROFILE_SIMPLE</constant>&nbsp;</entry>
+		      <entry>Simple profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_PROFILE_ADVANCED_SIMPLE</constant>&nbsp;</entry>
+		      <entry>Advanced Simple profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_PROFILE_CORE</constant>&nbsp;</entry>
+		      <entry>Core profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_PROFILE_SIMPLE_SCALABLE</constant>&nbsp;</entry>
+		      <entry>Simple Scalable profile</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_PROFILE_ADVANCED_CODING_EFFICIENCY</constant>&nbsp;</entry>
+		      <entry></entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MAX_REF_PIC</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">The maximum number of reference pictures used for encoding.
+Applicable to the encoder.
+</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_multi_slice_mode</entry>
+	      </row>
+	      <row><entry spanname="descr">Determines how the encoder should handle division of frame into slices.
+Applicable to the encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE</constant>&nbsp;</entry>
+		      <entry>Single slice per frame.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB</constant>&nbsp;</entry>
+		      <entry>Multiple slices with set maximum number of macroblocks per slice.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES</constant>&nbsp;</entry>
+		      <entry>Multiple slice with set maximum size in bytes per slice.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">The maximum number of macroblocks in a slice. Used when
+<constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> is set to <constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB</constant>.
+Applicable to the encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">The maximum size of a slice in bytes. Used when
+<constant>V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE</constant> is set to <constant>V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES</constant>.
+Applicable to the encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_h264_loop_filter_mode</entry>
+	      </row>
+	      <row><entry spanname="descr">Loop filter mode for H264 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED</constant>&nbsp;</entry>
+		      <entry>Loop filter is enabled.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED</constant>&nbsp;</entry>
+		      <entry>Loop filter is disabled.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY</constant>&nbsp;</entry>
+		      <entry>Loop filter is disabled at the slice boundary.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Loop filter alpha coefficient, defined in the H264 standard.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Loop filter beta coefficient, defined in the H264 standard.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_h264_symbol_mode</entry>
+	      </row>
+	      <row><entry spanname="descr">Entropy coding mode for H264 - CABAC/CAVALC.
+Applicable to the H264 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC</constant>&nbsp;</entry>
+		      <entry>Use CAVLC entropy coding.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC</constant>&nbsp;</entry>
+		      <entry>Use CABAC entropy coding.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Enable 8X8 transform for H264. Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Cyclic intra macroblock refresh. This is the number of continuous macroblocks
+refreshed every frame. Each frame a succesive set of macroblocks is refreshed until the cycle completes and starts from the
+top of the frame. Applicable to H264, H263 and MPEG4 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Frame level rate control enable.
+If this control is disabled then the quantization parameter for each frame type is constant and set with appropriate controls
+(e.g. <constant>V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP</constant>).
+If frame rate control is enabled then quantization parameter is adjusted to meet the chosen bitrate. Minimum and maximum value
+for the quantization parameter can be set with appropriate controls (e.g. <constant>V4L2_CID_MPEG_VIDEO_H263_MIN_QP</constant>).
+Applicable to encoders.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Macroblock level rate control enable.
+Applicable to the MPEG4 and H264 encoders.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_QPEL</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Quarter pixel motion estimation for MPEG4. Applicable to the MPEG4 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an I frame for H263. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_MIN_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Minimum quantization parameter for H263. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_MAX_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Maximum quantization parameter for H263. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an P frame for H263. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an B frame for H263. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an I frame for H264. Valid range: from 0 to 51.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_MIN_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Minimum quantization parameter for H264. Valid range: from 0 to 51.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_MAX_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Maximum quantization parameter for H264. Valid range: from 0 to 51.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an P frame for H264. Valid range: from 0 to 51.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an B frame for H264. Valid range: from 0 to 51.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an I frame for MPEG4. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Minimum quantization parameter for MPEG4. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Maximum quantization parameter for MPEG4. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an P frame for MPEG4. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an B frame for MPEG4. Valid range: from 1 to 31.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VBV_SIZE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">The Video Buffer Verifier size in kilobytes, it is used as a limitation of frame skip.
+The VBV is defined in the standard as a mean to verify that the produced stream will be succesfully decoded.
+The standard describes it as "Part of a hypothetical decoder that is conceptually connected to the
+output of the encoder. Its purpose is to provide a constraint on the variability of the data rate that an
+encoder or editing process may produce.".
+Applicable to the MPEG1, MPEG2, MPEG4 encoders.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">The Coded Picture Buffer size in kilobytes, it is used as a limitation of frame skip.
+The CPB is defined in the H264 standard as a mean to verify that the produced stream will be succesfully decoded.
+Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_I_PERIOD</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Period between I-frames in the open GOP for H264. In case of an open GOP
+this is the period between two I-frames. The period between IDR (Instantaneous Decoding Refresh) frames is taken from the GOP_SIZE control.
+An IDR frame, which stands for Instantaneous Decoding Refresh is an I-frame after which no prior frames are
+referenced. This means that a stream can be restarted from an IDR frame without the need to store or decode any
+previous frames. Applicable to the H264 encoder.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_HEADER_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_header_mode</entry>
+	      </row>
+	      <row><entry spanname="descr">Determines whether the header is returned as the first buffer or is
+it returned together with the first frame. Applicable to encoders.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE</constant>&nbsp;</entry>
+		      <entry>The stream header is returned separately in the first buffer.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME</constant>&nbsp;</entry>
+		      <entry>The stream header is returned together with the first encoded frame.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Enabled the deblocking post processing filter for MPEG4 decoder.
+Applicable to the MPEG4 decoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_RES</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">vop_time_increment_resolution value for MPEG4. Applicable to the MPEG4 encoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_MPEG4_VOP_TIME_INC</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">vop_time_increment value for MPEG4. Applicable to the MPEG4 encoder.</entry>
+	      </row>
+
+	    </tbody>
+	  </tgroup>
+	</table>
+      </section>
+
+      <section>
+	<title>MFC 5.1 MPEG Controls</title>
+
+	<para>The following MPEG class controls deal with MPEG
+decoding and encoding settings that are specific to the Multi Format Codec 5.1 device present
+in the S5P family of SoCs by Samsung.
+</para>
+
+	<table pgwide="1" frame="none" id="mfc51-control-id">
+	  <title>MFC 5.1 Control IDs</title>
+	  <tgroup cols="4">
+	    <colspec colname="c1" colwidth="1*" />
+	    <colspec colname="c2" colwidth="6*" />
+	    <colspec colname="c3" colwidth="2*" />
+	    <colspec colname="c4" colwidth="6*" />
+	    <spanspec namest="c1" nameend="c2" spanname="id" />
+	    <spanspec namest="c2" nameend="c4" spanname="descr" />
+	    <thead>
+	      <row>
+		<entry spanname="id" align="left">ID</entry>
+		<entry align="left">Type</entry>
+	      </row><row><entry spanname="descr" align="left">Description</entry>
+	      </row>
+	    </thead>
+	    <tbody valign="top">
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">If the display delay is enabled then the decoder has to return a
+CAPTURE buffer after processing a certain number of OUTPUT buffers. If this number is low, then it may result in
+buffers not being dequeued in display order. In addition hardware may still use those buffers as reference, thus
+application should not write to those buffers. This feature can be used for example for generating thumbnails of videos.
+Applicable to the H264 decoder.
+	      </entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Display delay value for H264 decoder.
+The decoder is forced to return a decoded frame after the set 'display delay' number of frames. If this number is
+low it may result in frames returned out of dispaly order, in addition the hardware may still be using the returned buffer
+as a reference picture for subsequent frames.
+</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">The number of reference pictures used for encoding a P picture.
+Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_PADDING</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Padding enable in the encoder - use a color instead of repeating border pixels.
+Applicable to encoders.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Padding color in the encoder. Applicable to encoders. The supplied 32-bit integer is interpreted as follows (bit
+0 = least significant bit):</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry>Bit 0:7</entry>
+		      <entry>V chrominance information</entry>
+		    </row>
+		    <row>
+		      <entry>Bit 8:15</entry>
+		      <entry>U chrominance information</entry>
+		    </row>
+		    <row>
+		      <entry>Bit 16:23</entry>
+		      <entry>Y luminance information</entry>
+		    </row>
+		    <row>
+		      <entry>Bit 24:31</entry>
+		      <entry>Must be zero.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Reaction coefficient for MFC rate control. Applicable to encoders.
+<para>Note 1: Valid only when the frame level RC is enabled.</para>
+<para>Note 2: For tight CBR, this field must be small (ex. 2 ~ 10).
+For VBR, this field must be large (ex. 100 ~ 1000).</para>
+<para>Note 3: It is not recommended to use the greater number than FRAME_RATE * (10^9 / BIT_RATE).</para>
+</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Adaptive rate control for dark region.
+Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>).
+Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Adaptive rate control for smooth region.
+Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>).
+Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Adaptive rate control for static region.
+Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>).
+Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Adaptive rate control for activity region.
+Valid only when H.264 and macroblock level RC is enabled (<constant>V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE</constant>).
+Applicable to the H264 encoder.</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_mfc51_frame_skip_mode</entry>
+	      </row>
+	      <row><entry spanname="descr">
+Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then
+a chosen data limit then the frame will be skipped.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED</constant>&nbsp;</entry>
+		      <entry>Frame skip mode is disabled.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT</constant>&nbsp;</entry>
+		      <entry>Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT</constant>&nbsp;</entry>
+		      <entry>Frame skip mode enabled and buffer limit is set by the VBV (MPEG1/2/4) or CPB (H264) buffer size control.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row><row><entry spanname="descr">Enable rate-control with fixed target bit.
+If this setting is enabled, then the rate control logic of the encoder will calculate the average bitrate
+for a GOP and keep it below or equal the set bitrate target. Otherwise the rate control logic calculates the
+overall average bitrate for the stream and keeps it below or equal to the set bitrate. In the first case
+the average bitrate for the whole stream will be smaller then the set bitrate. This is caused because the
+average is calculated for smaller number of frames, on the other hand enabling this setting will ensure that
+the stream will meet tight bandwidth contraints. Applicable to encoders.
+</entry>
+	      </row>
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE</constant>&nbsp;</entry>
+		<entry>enum&nbsp;v4l2_mpeg_mfc51_force_frame_type</entry>
+	      </row>
+	      <row><entry spanname="descr">Force a frame type for the next queued buffer. Applicable to encoders.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_DISABLED</constant>&nbsp;</entry>
+		      <entry>Forcing a specific frame type disabled.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_I_FRAME</constant>&nbsp;</entry>
+		      <entry>Force an I-frame.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_MPEG_MFC51_FORCE_FRAME_TYPE_NOT_CODED</constant>&nbsp;</entry>
+		      <entry>Force a non-coded frame.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+	      </row>
 	    </tbody>
 	  </tgroup>
 	</table>
@@ -2092,6 +3072,289 @@ manually or automatically if set to zero. Unit, range and step are driver-specif
 <para>For more details about RDS specification, refer to
 <xref linkend="en50067" /> document, from CENELEC.</para>
     </section>
+
+    <section id="flash-controls">
+      <title>Flash Control Reference</title>
+
+      <note>
+	<title>Experimental</title>
+
+	<para>This is an <link linkend="experimental">experimental</link>
+interface and may change in the future.</para>
+      </note>
+
+      <para>
+	The V4L2 flash controls are intended to provide generic access
+	to flash controller devices. Flash controller devices are
+	typically used in digital cameras.
+      </para>
+
+      <para>
+	The interface can support both LED and xenon flash devices. As
+	of writing this, there is no xenon flash driver using this
+	interface.
+      </para>
+
+      <section id="flash-controls-use-cases">
+	<title>Supported use cases</title>
+
+	<section>
+	  <title>Unsynchronised LED flash (software strobe)</title>
+
+	  <para>
+	    Unsynchronised LED flash is controlled directly by the
+	    host as the sensor. The flash must be enabled by the host
+	    before the exposure of the image starts and disabled once
+	    it ends. The host is fully responsible for the timing of
+	    the flash.
+	  </para>
+
+	  <para>Example of such device: Nokia N900.</para>
+	</section>
+
+	<section>
+	  <title>Synchronised LED flash (hardware strobe)</title>
+
+	  <para>
+	    The synchronised LED flash is pre-programmed by the host
+	    (power and timeout) but controlled by the sensor through a
+	    strobe signal from the sensor to the flash.
+	  </para>
+
+	  <para>
+	    The sensor controls the flash duration and timing. This
+	    information typically must be made available to the
+	    sensor.
+	  </para>
+
+	</section>
+
+	<section>
+	  <title>LED flash as torch</title>
+
+	  <para>
+	    LED flash may be used as torch in conjunction with another
+	    use case involving camera or individually.
+	  </para>
+
+	</section>
+
+      </section>
+
+      <table pgwide="1" frame="none" id="flash-control-id">
+      <title>Flash Control IDs</title>
+
+      <tgroup cols="4">
+	<colspec colname="c1" colwidth="1*" />
+	<colspec colname="c2" colwidth="6*" />
+	<colspec colname="c3" colwidth="2*" />
+	<colspec colname="c4" colwidth="6*" />
+	<spanspec namest="c1" nameend="c2" spanname="id" />
+	<spanspec namest="c2" nameend="c4" spanname="descr" />
+	<thead>
+	  <row>
+	    <entry spanname="id" align="left">ID</entry>
+	    <entry align="left">Type</entry>
+	  </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+	  </row>
+	</thead>
+	<tbody valign="top">
+	  <row><entry></entry></row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_CLASS</constant></entry>
+	    <entry>class</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">The FLASH class descriptor.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_LED_MODE</constant></entry>
+	    <entry>menu</entry>
+	  </row>
+	  <row id="v4l2-flash-led-mode">
+	    <entry spanname="descr">Defines the mode of the flash LED,
+	    the high-power white LED attached to the flash controller.
+	    Setting this control may not be possible in presence of
+	    some faults. See V4L2_CID_FLASH_FAULT.</entry>
+	  </row>
+	  <row>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_FLASH_LED_MODE_NONE</constant></entry>
+		  <entry>Off.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_LED_MODE_FLASH</constant></entry>
+		  <entry>Flash mode.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_LED_MODE_TORCH</constant></entry>
+		  <entry>Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_SOURCE</constant></entry>
+	    <entry>menu</entry>
+	  </row>
+	  <row id="v4l2-flash-strobe-source"><entry
+	  spanname="descr">Defines the source of the flash LED
+	  strobe.</entry>
+	  </row>
+	  <row>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_SOFTWARE</constant></entry>
+		  <entry>The flash strobe is triggered by using
+		  the V4L2_CID_FLASH_STROBE control.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_STROBE_SOURCE_EXTERNAL</constant></entry>
+		  <entry>The flash strobe is triggered by an
+		  external source. Typically this is a sensor,
+		  which makes it possible to synchronises the
+		  flash strobe start to exposure start.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE</constant></entry>
+	    <entry>button</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Strobe flash. Valid when
+	    V4L2_CID_FLASH_LED_MODE is set to
+	    V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE
+	    is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this
+	    control may not be possible in presence of some faults.
+	    See V4L2_CID_FLASH_FAULT.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STOP</constant></entry>
+	    <entry>button</entry>
+	  </row>
+	  <row><entry spanname="descr">Stop flash strobe immediately.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_STROBE_STATUS</constant></entry>
+	    <entry>boolean</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Strobe status: whether the flash
+	    is strobing at the moment or not. This is a read-only
+	    control.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_TIMEOUT</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Hardware timeout for flash. The
+	    flash strobe is stopped after this period of time has
+	    passed from the start of the strobe.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_INTENSITY</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Intensity of the flash strobe when
+	    the flash LED is in flash mode
+	    (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps
+	    (mA) if possible.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_TORCH_INTENSITY</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Intensity of the flash LED in
+	    torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be
+	    milliamps (mA) if possible. Setting this control may not
+	    be possible in presence of some faults. See
+	    V4L2_CID_FLASH_FAULT.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_INDICATOR_INTENSITY</constant></entry>
+	    <entry>integer</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Intensity of the indicator LED.
+	    The indicator LED may be fully independent of the flash
+	    LED. The unit should be microamps (uA) if possible.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_FAULT</constant></entry>
+	    <entry>bitmask</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Faults related to the flash. The
+	    faults tell about specific problems in the flash chip
+	    itself or the LEDs attached to it. Faults may prevent
+	    further use of some of the flash controls. In particular,
+	    V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE
+	    if the fault affects the flash LED. Exactly which faults
+	    have such an effect is chip dependent. Reading the faults
+	    resets the control and returns the chip to a usable state
+	    if possible.</entry>
+	  </row>
+	  <row>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_FLASH_FAULT_OVER_VOLTAGE</constant></entry>
+		  <entry>Flash controller voltage to the flash LED
+		  has exceeded the limit specific to the flash
+		  controller.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_FAULT_TIMEOUT</constant></entry>
+		  <entry>The flash strobe was still on when
+		  the timeout set by the user ---
+		  V4L2_CID_FLASH_TIMEOUT control --- has expired.
+		  Not all flash controllers may set this in all
+		  such conditions.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_FAULT_OVER_TEMPERATURE</constant></entry>
+		  <entry>The flash controller has overheated.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_FLASH_FAULT_SHORT_CIRCUIT</constant></entry>
+		  <entry>The short circuit protection of the flash
+		  controller has been triggered.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_CHARGE</constant></entry>
+	    <entry>boolean</entry>
+	  </row>
+	  <row><entry spanname="descr">Enable or disable charging of the xenon
+	  flash capacitor.</entry>
+	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_FLASH_READY</constant></entry>
+	    <entry>boolean</entry>
+	  </row>
+	  <row>
+	    <entry spanname="descr">Is the flash ready to strobe?
+	    Xenon flashes require their capacitors charged before
+	    strobing. LED flashes often require a cooldown period
+	    after strobe during which another strobe will not be
+	    possible. This is a read-only control.</entry>
+	  </row>
+	  <row><entry></entry></row>
+	</tbody>
+      </tgroup>
+      </table>
+
+    </section>
 </section>
 
   <!--
diff --git a/Documentation/DocBook/v4l/crop.pdf b/Documentation/DocBook/media/v4l/crop.pdf
index c9fb81cd32f..c9fb81cd32f 100644
--- a/Documentation/DocBook/v4l/crop.pdf
+++ b/Documentation/DocBook/media/v4l/crop.pdf
diff --git a/Documentation/DocBook/v4l/dev-capture.xml b/Documentation/DocBook/media/v4l/dev-capture.xml
index 2237c661f26..2237c661f26 100644
--- a/Documentation/DocBook/v4l/dev-capture.xml
+++ b/Documentation/DocBook/media/v4l/dev-capture.xml
diff --git a/Documentation/DocBook/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml
index 6e156dc45b9..6e156dc45b9 100644
--- a/Documentation/DocBook/v4l/dev-codec.xml
+++ b/Documentation/DocBook/media/v4l/dev-codec.xml
diff --git a/Documentation/DocBook/v4l/dev-effect.xml b/Documentation/DocBook/media/v4l/dev-effect.xml
index 9c243beba0e..9c243beba0e 100644
--- a/Documentation/DocBook/v4l/dev-effect.xml
+++ b/Documentation/DocBook/media/v4l/dev-effect.xml
diff --git a/Documentation/DocBook/media/v4l/dev-event.xml b/Documentation/DocBook/media/v4l/dev-event.xml
new file mode 100644
index 00000000000..f14ae3fe107
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/dev-event.xml
@@ -0,0 +1,51 @@
+  <title>Event Interface</title>
+
+  <para>The V4L2 event interface provides a means for a user to get
+  immediately notified on certain conditions taking place on a device.
+  This might include start of frame or loss of signal events, for
+  example. Changes in the value or state of a V4L2 control can also be
+  reported through events.
+  </para>
+
+  <para>To receive events, the events the user is interested in first must
+  be subscribed using the &VIDIOC-SUBSCRIBE-EVENT; ioctl. Once an event is
+  subscribed, the events of subscribed types are dequeueable using the
+  &VIDIOC-DQEVENT; ioctl. Events may be unsubscribed using
+  VIDIOC_UNSUBSCRIBE_EVENT ioctl. The special event type V4L2_EVENT_ALL may
+  be used to unsubscribe all the events the driver supports.</para>
+
+  <para>The event subscriptions and event queues are specific to file
+  handles. Subscribing an event on one file handle does not affect
+  other file handles.</para>
+
+  <para>The information on dequeueable events is obtained by using select or
+  poll system calls on video devices. The V4L2 events use POLLPRI events on
+  poll system call and exceptions on select system call.</para>
+
+  <para>Starting with kernel 3.1 certain guarantees can be given with
+  regards to events:<orderedlist>
+	<listitem>
+	  <para>Each subscribed event has its own internal dedicated event queue.
+This means that flooding of one event type will not interfere with other
+event types.</para>
+	</listitem>
+	<listitem>
+	  <para>If the internal event queue for a particular subscribed event
+becomes full, then the oldest event in that queue will be dropped.</para>
+	</listitem>
+	<listitem>
+	  <para>Where applicable, certain event types can ensure that the payload
+of the oldest event that is about to be dropped will be merged with the payload
+of the next oldest event. Thus ensuring that no information is lost, but only an
+intermediate step leading up to that information. See the documentation for the
+event you want to subscribe to whether this is applicable for that event or not.</para>
+	</listitem>
+      </orderedlist></para>
+
+  <!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+  -->
diff --git a/Documentation/DocBook/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml
index c9a68a2ccd3..c9a68a2ccd3 100644
--- a/Documentation/DocBook/v4l/dev-osd.xml
+++ b/Documentation/DocBook/media/v4l/dev-osd.xml
diff --git a/Documentation/DocBook/v4l/dev-output.xml b/Documentation/DocBook/media/v4l/dev-output.xml
index 919e22c5385..919e22c5385 100644
--- a/Documentation/DocBook/v4l/dev-output.xml
+++ b/Documentation/DocBook/media/v4l/dev-output.xml
diff --git a/Documentation/DocBook/v4l/dev-overlay.xml b/Documentation/DocBook/media/v4l/dev-overlay.xml
index 92513cf7915..92513cf7915 100644
--- a/Documentation/DocBook/v4l/dev-overlay.xml
+++ b/Documentation/DocBook/media/v4l/dev-overlay.xml
diff --git a/Documentation/DocBook/v4l/dev-radio.xml b/Documentation/DocBook/media/v4l/dev-radio.xml
index 73aa90b45b3..73aa90b45b3 100644
--- a/Documentation/DocBook/v4l/dev-radio.xml
+++ b/Documentation/DocBook/media/v4l/dev-radio.xml
diff --git a/Documentation/DocBook/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
index c5a70bdfaf2..c5a70bdfaf2 100644
--- a/Documentation/DocBook/v4l/dev-raw-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml
diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/media/v4l/dev-rds.xml
index 2427f54397e..2427f54397e 100644
--- a/Documentation/DocBook/v4l/dev-rds.xml
+++ b/Documentation/DocBook/media/v4l/dev-rds.xml
diff --git a/Documentation/DocBook/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
index 69e789fa7f7..69e789fa7f7 100644
--- a/Documentation/DocBook/v4l/dev-sliced-vbi.xml
+++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml
diff --git a/Documentation/DocBook/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml
index 05c8fefcbcb..05c8fefcbcb 100644
--- a/Documentation/DocBook/v4l/dev-subdev.xml
+++ b/Documentation/DocBook/media/v4l/dev-subdev.xml
diff --git a/Documentation/DocBook/v4l/dev-teletext.xml b/Documentation/DocBook/media/v4l/dev-teletext.xml
index 414b1cfff9f..414b1cfff9f 100644
--- a/Documentation/DocBook/v4l/dev-teletext.xml
+++ b/Documentation/DocBook/media/v4l/dev-teletext.xml
diff --git a/Documentation/DocBook/v4l/driver.xml b/Documentation/DocBook/media/v4l/driver.xml
index 1f7eea5c4ec..1f7eea5c4ec 100644
--- a/Documentation/DocBook/v4l/driver.xml
+++ b/Documentation/DocBook/media/v4l/driver.xml
diff --git a/Documentation/DocBook/v4l/fdl-appendix.xml b/Documentation/DocBook/media/v4l/fdl-appendix.xml
index ae22394ba99..ae22394ba99 100644
--- a/Documentation/DocBook/v4l/fdl-appendix.xml
+++ b/Documentation/DocBook/media/v4l/fdl-appendix.xml
diff --git a/Documentation/DocBook/v4l/fieldseq_bt.pdf b/Documentation/DocBook/media/v4l/fieldseq_bt.pdf
index 26598b23f80..26598b23f80 100644
--- a/Documentation/DocBook/v4l/fieldseq_bt.pdf
+++ b/Documentation/DocBook/media/v4l/fieldseq_bt.pdf
diff --git a/Documentation/DocBook/v4l/fieldseq_tb.pdf b/Documentation/DocBook/media/v4l/fieldseq_tb.pdf
index 4965b22ddb3..4965b22ddb3 100644
--- a/Documentation/DocBook/v4l/fieldseq_tb.pdf
+++ b/Documentation/DocBook/media/v4l/fieldseq_tb.pdf
diff --git a/Documentation/DocBook/v4l/func-close.xml b/Documentation/DocBook/media/v4l/func-close.xml
index dfb41cbbbec..dfb41cbbbec 100644
--- a/Documentation/DocBook/v4l/func-close.xml
+++ b/Documentation/DocBook/media/v4l/func-close.xml
diff --git a/Documentation/DocBook/media/v4l/func-ioctl.xml b/Documentation/DocBook/media/v4l/func-ioctl.xml
new file mode 100644
index 00000000000..2de64be706f
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/func-ioctl.xml
@@ -0,0 +1,79 @@
+<refentry id="func-ioctl">
+  <refmeta>
+    <refentrytitle>V4L2 ioctl()</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>v4l2-ioctl</refname>
+    <refpurpose>Program a V4L2 device</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcsynopsisinfo>#include &lt;sys/ioctl.h&gt;</funcsynopsisinfo>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>void *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>V4L2 ioctl request code as defined in the <filename>videodev2.h</filename> header file, for example
+VIDIOC_QUERYCAP.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para>Pointer to a function parameter, usually a structure.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>The <function>ioctl()</function> function is used to program
+V4L2 devices. The argument <parameter>fd</parameter> must be an open
+file descriptor. An ioctl <parameter>request</parameter> has encoded
+in it whether the argument is an input, output or read/write
+parameter, and the size of the argument <parameter>argp</parameter> in
+bytes. Macros and defines specifying V4L2 ioctl requests are located
+in the <filename>videodev2.h</filename> header file.
+Applications should use their own copy, not include the version in the
+kernel sources on the system they compile on. All V4L2 ioctl requests,
+their respective function and parameters are specified in <xref
+	linkend="user-func" />.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+    <para>When an ioctl that takes an output or read/write parameter fails,
+    the parameter remains unmodified.</para>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/func-mmap.xml b/Documentation/DocBook/media/v4l/func-mmap.xml
index 786732b64bb..786732b64bb 100644
--- a/Documentation/DocBook/v4l/func-mmap.xml
+++ b/Documentation/DocBook/media/v4l/func-mmap.xml
diff --git a/Documentation/DocBook/v4l/func-munmap.xml b/Documentation/DocBook/media/v4l/func-munmap.xml
index e2c4190f9bb..e2c4190f9bb 100644
--- a/Documentation/DocBook/v4l/func-munmap.xml
+++ b/Documentation/DocBook/media/v4l/func-munmap.xml
diff --git a/Documentation/DocBook/v4l/func-open.xml b/Documentation/DocBook/media/v4l/func-open.xml
index 7595d07a8c7..7595d07a8c7 100644
--- a/Documentation/DocBook/v4l/func-open.xml
+++ b/Documentation/DocBook/media/v4l/func-open.xml
diff --git a/Documentation/DocBook/v4l/func-poll.xml b/Documentation/DocBook/media/v4l/func-poll.xml
index ec3c718f596..ec3c718f596 100644
--- a/Documentation/DocBook/v4l/func-poll.xml
+++ b/Documentation/DocBook/media/v4l/func-poll.xml
diff --git a/Documentation/DocBook/v4l/func-read.xml b/Documentation/DocBook/media/v4l/func-read.xml
index a5089bf8873..a5089bf8873 100644
--- a/Documentation/DocBook/v4l/func-read.xml
+++ b/Documentation/DocBook/media/v4l/func-read.xml
diff --git a/Documentation/DocBook/v4l/func-select.xml b/Documentation/DocBook/media/v4l/func-select.xml
index b6713623181..b6713623181 100644
--- a/Documentation/DocBook/v4l/func-select.xml
+++ b/Documentation/DocBook/media/v4l/func-select.xml
diff --git a/Documentation/DocBook/v4l/func-write.xml b/Documentation/DocBook/media/v4l/func-write.xml
index 2c09c09371c..2c09c09371c 100644
--- a/Documentation/DocBook/v4l/func-write.xml
+++ b/Documentation/DocBook/media/v4l/func-write.xml
diff --git a/Documentation/DocBook/media/v4l/gen-errors.xml b/Documentation/DocBook/media/v4l/gen-errors.xml
new file mode 100644
index 00000000000..5bbf3ce1973
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/gen-errors.xml
@@ -0,0 +1,78 @@
+<title>Generic Error Codes</title>
+
+<table frame="none" pgwide="1" id="gen-errors">
+  <title>Generic error codes</title>
+  <tgroup cols="2">
+    &cs-str;
+    <tbody valign="top">
+	<!-- Keep it ordered alphabetically -->
+      <row>
+	<entry>EBADF</entry>
+	<entry>The file descriptor is not a valid.</entry>
+      </row>
+      <row>
+	<entry>EBUSY</entry>
+	<entry>The ioctl can't be handled because the device is busy. This is
+	       typically return while device is streaming, and an ioctl tried to
+	       change something that would affect the stream, or would require the
+	       usage of a hardware resource that was already allocated. The ioctl
+	       must not be retried without performing another action to fix the
+	       problem first (typically: stop the stream before retrying).</entry>
+      </row>
+      <row>
+	<entry>EFAULT</entry>
+	<entry>There was a failure while copying data from/to userspace,
+	       probably caused by an invalid pointer reference.</entry>
+      </row>
+      <row>
+	<entry>EINVAL</entry>
+	<entry>One or more of the ioctl parameters are invalid or out of the
+	       allowed range. This is a widely used error code. See the individual
+	       ioctl requests for specific causes.</entry>
+      </row>
+      <row>
+        <entry>ENODEV</entry>
+	<entry>Device not found or was removed.</entry>
+      </row>
+      <row>
+	<entry>ENOMEM</entry>
+	<entry>There's not enough memory to handle the desired operation.</entry>
+      </row>
+      <row>
+	<entry>ENOTTY</entry>
+	<entry>The ioctl is not supported by the driver, actually meaning that
+	       the required functionality is not available, or the file
+	       descriptor is not for a media device.</entry>
+      </row>
+      <row>
+	<entry>ENOSPC</entry>
+	<entry>On USB devices, the stream ioctl's can return this error, meaning
+	       that this request would overcommit the usb bandwidth reserved
+	       for periodic transfers (up to 80% of the USB bandwidth).</entry>
+      </row>
+      <row>
+	<entry>ENOSYS or EOPNOTSUPP</entry>
+	<entry>Function not available for this device (dvb API only. Will likely
+	       be replaced anytime soon by ENOTTY).</entry>
+      </row>
+      <row>
+	<entry>EPERM</entry>
+	<entry>Permission denied. Can be returned if the device needs write
+		permission, or some special capabilities is needed
+		(e. g. root)</entry>
+      </row>
+      <row>
+	<entry>EWOULDBLOCK</entry>
+	<entry>Operation would block. Used when the ioctl would need to wait
+	       for an event, but the device was opened in non-blocking mode.</entry>
+      </row>
+    </tbody>
+  </tgroup>
+</table>
+
+<para>Note 1: ioctls may return other error codes. Since errors may have side
+effects such as a driver reset, applications should abort on unexpected errors.
+</para>
+
+<para>Note 2: Request-specific error codes are listed in the individual
+requests descriptions.</para>
diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index c57d1ec6291..c57d1ec6291 100644
--- a/Documentation/DocBook/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
diff --git a/Documentation/DocBook/v4l/keytable.c.xml b/Documentation/DocBook/media/v4l/keytable.c.xml
index d53254a3be1..d53254a3be1 100644
--- a/Documentation/DocBook/v4l/keytable.c.xml
+++ b/Documentation/DocBook/media/v4l/keytable.c.xml
diff --git a/Documentation/DocBook/v4l/libv4l.xml b/Documentation/DocBook/media/v4l/libv4l.xml
index 3cb10ec5192..3cb10ec5192 100644
--- a/Documentation/DocBook/v4l/libv4l.xml
+++ b/Documentation/DocBook/media/v4l/libv4l.xml
diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/media/v4l/lirc_device_interface.xml
index 0e0453f39e7..8d7eb6bf631 100644
--- a/Documentation/DocBook/v4l/lirc_device_interface.xml
+++ b/Documentation/DocBook/media/v4l/lirc_device_interface.xml
@@ -246,6 +246,8 @@ on working with the default settings initially.</para>
     </listitem>
   </varlistentry>
 </variablelist>
-
+<section id="lirc_dev_errors">
+  &return-value;
+</section>
 </section>
 </section>
diff --git a/Documentation/DocBook/v4l/media-controller.xml b/Documentation/DocBook/media/v4l/media-controller.xml
index 873ac3a621f..873ac3a621f 100644
--- a/Documentation/DocBook/v4l/media-controller.xml
+++ b/Documentation/DocBook/media/v4l/media-controller.xml
diff --git a/Documentation/DocBook/v4l/media-func-close.xml b/Documentation/DocBook/media/v4l/media-func-close.xml
index be149c802ae..be149c802ae 100644
--- a/Documentation/DocBook/v4l/media-func-close.xml
+++ b/Documentation/DocBook/media/v4l/media-func-close.xml
diff --git a/Documentation/DocBook/v4l/media-func-ioctl.xml b/Documentation/DocBook/media/v4l/media-func-ioctl.xml
index bda8604de15..39478d0fbca 100644
--- a/Documentation/DocBook/v4l/media-func-ioctl.xml
+++ b/Documentation/DocBook/media/v4l/media-func-ioctl.xml
@@ -63,54 +63,11 @@
   </refsect1>
 
   <refsect1>
-    <title>Return Value</title>
+    &return-value;
 
-    <para><function>ioctl()</function> returns <returnvalue>0</returnvalue> on
-    success. On failure, <returnvalue>-1</returnvalue> is returned, and the
-    <varname>errno</varname> variable is set appropriately. Generic error codes
-    are listed below, and request-specific error codes are listed in the
+    <para>Request-specific error codes are listed in the
     individual requests descriptions.</para>
     <para>When an ioctl that takes an output or read/write parameter fails,
     the parameter remains unmodified.</para>
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EBADF</errorcode></term>
-	<listitem>
-	  <para><parameter>fd</parameter> is not a valid open file descriptor.
-	  </para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EFAULT</errorcode></term>
-	<listitem>
-	  <para><parameter>argp</parameter> references an inaccessible memory
-	  area.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The <parameter>request</parameter> or the data pointed to by
-	  <parameter>argp</parameter> is not valid. This is a very common error
-	  code, see the individual ioctl requests listed in
-	  <xref linkend="media-user-func" /> for actual causes.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENOMEM</errorcode></term>
-	<listitem>
-	  <para>Insufficient kernel memory was available to complete the
-	  request.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENOTTY</errorcode></term>
-	<listitem>
-	  <para><parameter>fd</parameter> is  not  associated  with  a character
-	  special device.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/media-func-open.xml b/Documentation/DocBook/media/v4l/media-func-open.xml
index f7df034dc9e..f7df034dc9e 100644
--- a/Documentation/DocBook/v4l/media-func-open.xml
+++ b/Documentation/DocBook/media/v4l/media-func-open.xml
diff --git a/Documentation/DocBook/v4l/media-ioc-device-info.xml b/Documentation/DocBook/media/v4l/media-ioc-device-info.xml
index 1f3237351bb..2ce521419e6 100644
--- a/Documentation/DocBook/v4l/media-ioc-device-info.xml
+++ b/Documentation/DocBook/media/v4l/media-ioc-device-info.xml
@@ -127,7 +127,6 @@
   </refsect1>
 
   <refsect1>
-    <title>Return value</title>
-    <para>This function doesn't return specific error codes.</para>
+    &return-value;
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml
index 576b68b33f2..576b68b33f2 100644
--- a/Documentation/DocBook/v4l/media-ioc-enum-entities.xml
+++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml
diff --git a/Documentation/DocBook/v4l/media-ioc-enum-links.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-links.xml
index d2fc73ef8d5..355df43badc 100644
--- a/Documentation/DocBook/v4l/media-ioc-enum-links.xml
+++ b/Documentation/DocBook/media/v4l/media-ioc-enum-links.xml
@@ -139,7 +139,7 @@
     </table>
 
     <table pgwide="1" frame="none" id="media-link-desc">
-      <title>struct <structname>media_links_desc</structname></title>
+      <title>struct <structname>media_link_desc</structname></title>
       <tgroup cols="3">
         &cs-str;
 	<tbody valign="top">
diff --git a/Documentation/DocBook/v4l/media-ioc-setup-link.xml b/Documentation/DocBook/media/v4l/media-ioc-setup-link.xml
index cec97af4dab..fc2e522ee65 100644
--- a/Documentation/DocBook/v4l/media-ioc-setup-link.xml
+++ b/Documentation/DocBook/media/v4l/media-ioc-setup-link.xml
@@ -72,15 +72,6 @@
 
     <variablelist>
       <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The link properties can't be changed because the link is
-	  currently busy. This can be caused, for instance, by an active media
-	  stream (audio or video) on the link. The ioctl shouldn't be retried if
-	  no other action is performed before to fix the problem.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &media-link-desc; references a non-existing link, or the
diff --git a/Documentation/DocBook/v4l/pipeline.pdf b/Documentation/DocBook/media/v4l/pipeline.pdf
index ee3e37f04b6..ee3e37f04b6 100644
--- a/Documentation/DocBook/v4l/pipeline.pdf
+++ b/Documentation/DocBook/media/v4l/pipeline.pdf
diff --git a/Documentation/DocBook/v4l/pixfmt-grey.xml b/Documentation/DocBook/media/v4l/pixfmt-grey.xml
index 3b72bc6b2de..3b72bc6b2de 100644
--- a/Documentation/DocBook/v4l/pixfmt-grey.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-grey.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-m420.xml b/Documentation/DocBook/media/v4l/pixfmt-m420.xml
index ce4bc019e5c..ce4bc019e5c 100644
--- a/Documentation/DocBook/v4l/pixfmt-m420.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-m420.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-nv12.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
index 873f6703518..873f6703518 100644
--- a/Documentation/DocBook/v4l/pixfmt-nv12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
index c9e166d9ded..c9e166d9ded 100644
--- a/Documentation/DocBook/v4l/pixfmt-nv12m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-nv12mt.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
index 7a2855a526c..7a2855a526c 100644
--- a/Documentation/DocBook/v4l/pixfmt-nv12mt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv12mt.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-nv16.xml b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
index 26094035fc0..26094035fc0 100644
--- a/Documentation/DocBook/v4l/pixfmt-nv16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-nv16.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
index 4db272b8a0d..4db272b8a0d 100644
--- a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-packed-yuv.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
index 3cab5d0ca75..3cab5d0ca75 100644
--- a/Documentation/DocBook/v4l/pixfmt-packed-yuv.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-packed-yuv.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-sbggr16.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
index 519a9efbac1..519a9efbac1 100644
--- a/Documentation/DocBook/v4l/pixfmt-sbggr16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr16.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-sbggr8.xml b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
index 5fe84ecc2eb..5fe84ecc2eb 100644
--- a/Documentation/DocBook/v4l/pixfmt-sbggr8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sbggr8.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-sgbrg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
index d67a472b088..d67a472b088 100644
--- a/Documentation/DocBook/v4l/pixfmt-sgbrg8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sgbrg8.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-sgrbg8.xml b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
index 0cdf13b8ac1..0cdf13b8ac1 100644
--- a/Documentation/DocBook/v4l/pixfmt-sgrbg8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-sgrbg8.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
index 7b274092e60..7b274092e60 100644
--- a/Documentation/DocBook/v4l/pixfmt-srggb10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-srggb12.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
index 9ba4fb690bc..9ba4fb690bc 100644
--- a/Documentation/DocBook/v4l/pixfmt-srggb12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-srggb8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb8.xml
index 2570e3be3cf..2570e3be3cf 100644
--- a/Documentation/DocBook/v4l/pixfmt-srggb8.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-srggb8.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-uyvy.xml b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
index 816c8d467c1..816c8d467c1 100644
--- a/Documentation/DocBook/v4l/pixfmt-uyvy.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-uyvy.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-vyuy.xml b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
index 61f12a5e68d..61f12a5e68d 100644
--- a/Documentation/DocBook/v4l/pixfmt-vyuy.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-vyuy.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-y10.xml b/Documentation/DocBook/media/v4l/pixfmt-y10.xml
index d065043db8d..d065043db8d 100644
--- a/Documentation/DocBook/v4l/pixfmt-y10.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y10.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-y10b.xml b/Documentation/DocBook/media/v4l/pixfmt-y10b.xml
index adb0ad808c9..adb0ad808c9 100644
--- a/Documentation/DocBook/v4l/pixfmt-y10b.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y10b.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-y12.xml b/Documentation/DocBook/media/v4l/pixfmt-y12.xml
index ff417b858cc..ff417b858cc 100644
--- a/Documentation/DocBook/v4l/pixfmt-y12.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y12.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-y16.xml b/Documentation/DocBook/media/v4l/pixfmt-y16.xml
index d5840401507..d5840401507 100644
--- a/Documentation/DocBook/v4l/pixfmt-y16.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y16.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-y41p.xml b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
index 73c8536efb0..73c8536efb0 100644
--- a/Documentation/DocBook/v4l/pixfmt-y41p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-y41p.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yuv410.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
index 8eb4a193d77..8eb4a193d77 100644
--- a/Documentation/DocBook/v4l/pixfmt-yuv410.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv410.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yuv411p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
index 00e0960a986..00e0960a986 100644
--- a/Documentation/DocBook/v4l/pixfmt-yuv411p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv411p.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yuv420.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
index 42d7de5e456..42d7de5e456 100644
--- a/Documentation/DocBook/v4l/pixfmt-yuv420.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yuv420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
index f5d8f57495c..f5d8f57495c 100644
--- a/Documentation/DocBook/v4l/pixfmt-yuv420m.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yuv422p.xml b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
index 4348bd9f0d0..4348bd9f0d0 100644
--- a/Documentation/DocBook/v4l/pixfmt-yuv422p.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuv422p.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yuyv.xml b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
index bdb2ffacbbc..bdb2ffacbbc 100644
--- a/Documentation/DocBook/v4l/pixfmt-yuyv.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yuyv.xml
diff --git a/Documentation/DocBook/v4l/pixfmt-yvyu.xml b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
index 40d17ae39dd..40d17ae39dd 100644
--- a/Documentation/DocBook/v4l/pixfmt-yvyu.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt-yvyu.xml
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml
index deb660207f9..2ff6b7776d7 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -121,7 +121,7 @@ set this field to zero.</entry>
     an array of <structname>v4l2_plane_pix_format</structname> structures,
     describing all planes of that format.</para>
   <table pgwide="1" frame="none" id="v4l2-plane-pix-format">
-    <title>struct <structname>vl42_plane_pix_format</structname></title>
+    <title>struct <structname>v4l2_plane_pix_format</structname></title>
     <tgroup cols="3">
       &cs-str;
       <tbody valign="top">
@@ -741,10 +741,55 @@ information.</para>
 	  <row id="V4L2-PIX-FMT-MPEG">
 	    <entry><constant>V4L2_PIX_FMT_MPEG</constant></entry>
 	    <entry>'MPEG'</entry>
-	    <entry>MPEG stream. The actual format is determined by
+	    <entry>MPEG multiplexed stream. The actual format is determined by
 extended control <constant>V4L2_CID_MPEG_STREAM_TYPE</constant>, see
 <xref linkend="mpeg-control-id" />.</entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-H264">
+		<entry><constant>V4L2_PIX_FMT_H264</constant></entry>
+		<entry>'H264'</entry>
+		<entry>H264 video elementary stream with start codes.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-H264-NO-SC">
+		<entry><constant>V4L2_PIX_FMT_H264_NO_SC</constant></entry>
+		<entry>'AVC1'</entry>
+		<entry>H264 video elementary stream without start codes.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-H263">
+		<entry><constant>V4L2_PIX_FMT_H263</constant></entry>
+		<entry>'H263'</entry>
+		<entry>H263 video elementary stream.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-MPEG1">
+		<entry><constant>V4L2_PIX_FMT_MPEG1</constant></entry>
+		<entry>'MPG1'</entry>
+		<entry>MPEG1 video elementary stream.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-MPEG2">
+		<entry><constant>V4L2_PIX_FMT_MPEG2</constant></entry>
+		<entry>'MPG2'</entry>
+		<entry>MPEG2 video elementary stream.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-MPEG4">
+		<entry><constant>V4L2_PIX_FMT_MPEG4</constant></entry>
+		<entry>'MPG4'</entry>
+		<entry>MPEG4 video elementary stream.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-XVID">
+		<entry><constant>V4L2_PIX_FMT_XVID</constant></entry>
+		<entry>'XVID'</entry>
+		<entry>Xvid video elementary stream.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-VC1-ANNEX-G">
+		<entry><constant>V4L2_PIX_FMT_VC1_ANNEX_G</constant></entry>
+		<entry>'VC1G'</entry>
+		<entry>VC1, SMPTE 421M Annex G compliant stream.</entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-VC1-ANNEX-L">
+		<entry><constant>V4L2_PIX_FMT_VC1_ANNEX_L</constant></entry>
+		<entry>'VC1L'</entry>
+		<entry>VC1, SMPTE 421M Annex L compliant stream.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
@@ -804,6 +849,12 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
 	    <entry>'CPIA'</entry>
 	    <entry>YUV format used by the gspca cpia1 driver.</entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-JPGL">
+	    <entry><constant>V4L2_PIX_FMT_JPGL</constant></entry>
+	    <entry>'JPGL'</entry>
+	    <entry>JPEG-Light format (Pegasus Lossless JPEG)
+			used in Divio webcams NW 80x.</entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-SPCA501">
 	    <entry><constant>V4L2_PIX_FMT_SPCA501</constant></entry>
 	    <entry>'S501'</entry>
@@ -854,6 +905,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
 	    <entry>'PJPG'</entry>
 	    <entry>Pixart 73xx JPEG format used by the gspca driver.</entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-SE401">
+	    <entry><constant>V4L2_PIX_FMT_SE401</constant></entry>
+	    <entry>'S401'</entry>
+	    <entry>Compressed RGB format used by the gspca se401 driver</entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-SQ905C">
 	    <entry><constant>V4L2_PIX_FMT_SQ905C</constant></entry>
 	    <entry>'905C'</entry>
diff --git a/Documentation/DocBook/v4l/planar-apis.xml b/Documentation/DocBook/media/v4l/planar-apis.xml
index 878ce204048..878ce204048 100644
--- a/Documentation/DocBook/v4l/planar-apis.xml
+++ b/Documentation/DocBook/media/v4l/planar-apis.xml
diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/media/v4l/remote_controllers.xml
index 160e464d44b..160e464d44b 100644
--- a/Documentation/DocBook/v4l/remote_controllers.xml
+++ b/Documentation/DocBook/media/v4l/remote_controllers.xml
diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml
index 8d3409d2c63..49c532ebbbb 100644
--- a/Documentation/DocBook/v4l/subdev-formats.xml
+++ b/Documentation/DocBook/media/v4l/subdev-formats.xml
@@ -380,9 +380,6 @@
 	<title>Bayer Patterns</title>
 	<mediaobject>
 	  <imageobject>
-	    <imagedata fileref="bayer.pdf" format="PS" />
-	  </imageobject>
-	  <imageobject>
 	    <imagedata fileref="bayer.png" format="PNG" />
 	  </imageobject>
 	  <textobject>
@@ -2528,7 +2525,7 @@
 
       <para>Those data formats consist of an ordered sequence of 8-bit bytes
 	obtained from JPEG compression process. Additionally to the
-	<constant>_JPEG</constant> prefix the format code is made of
+	<constant>_JPEG</constant> postfix the format code is made of
 	the following information.
 	<itemizedlist>
 	  <listitem><para>The number of bus samples per entropy encoded byte.</para></listitem>
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index a7fd76d0dac..0d05e8747c1 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -87,7 +87,7 @@ Remote Controller chapter.</contrib>
       </author>
 
       <author>
-      	<firstname>Pawel</firstname>
+	<firstname>Pawel</firstname>
 	<surname>Osciak</surname>
 	<contrib>Designed and documented the multi-planar API.</contrib>
 	<affiliation>
@@ -128,6 +128,15 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
+	<revnumber>3.1</revnumber>
+	<date>2011-06-27</date>
+	<authorinitials>mcc, po, hv</authorinitials>
+	<revremark>Documented that VIDIOC_QUERYCAP now returns a per-subsystem version instead of a per-driver one.
+		   Standardize an error code for invalid ioctl.
+		   Added V4L2_CTRL_TYPE_BITMASK.</revremark>
+      </revision>
+
+      <revision>
 	<revnumber>2.6.39</revnumber>
 	<date>2011-03-01</date>
 	<authorinitials>mcc, po</authorinitials>
@@ -401,7 +410,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.39</subtitle>
+ <subtitle>Revision 3.1</subtitle>
 
   <chapter id="common">
     &sub-common;
diff --git a/Documentation/DocBook/v4l/v4l2grab.c.xml b/Documentation/DocBook/media/v4l/v4l2grab.c.xml
index bed12e40be2..bed12e40be2 100644
--- a/Documentation/DocBook/v4l/v4l2grab.c.xml
+++ b/Documentation/DocBook/media/v4l/v4l2grab.c.xml
diff --git a/Documentation/DocBook/v4l/vbi_525.pdf b/Documentation/DocBook/media/v4l/vbi_525.pdf
index 9e72c25b208..9e72c25b208 100644
--- a/Documentation/DocBook/v4l/vbi_525.pdf
+++ b/Documentation/DocBook/media/v4l/vbi_525.pdf
diff --git a/Documentation/DocBook/v4l/vbi_625.pdf b/Documentation/DocBook/media/v4l/vbi_625.pdf
index 765235e33a4..765235e33a4 100644
--- a/Documentation/DocBook/v4l/vbi_625.pdf
+++ b/Documentation/DocBook/media/v4l/vbi_625.pdf
diff --git a/Documentation/DocBook/v4l/vbi_hsync.pdf b/Documentation/DocBook/media/v4l/vbi_hsync.pdf
index 200b668189b..200b668189b 100644
--- a/Documentation/DocBook/v4l/vbi_hsync.pdf
+++ b/Documentation/DocBook/media/v4l/vbi_hsync.pdf
diff --git a/Documentation/DocBook/v4l/vidioc-cropcap.xml b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml
index 816e90e283c..b4f2f255211 100644
--- a/Documentation/DocBook/v4l/vidioc-cropcap.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml
@@ -156,19 +156,10 @@ on 22 Oct 2002 subject "Re:[V4L][patches!] Re:v4l2/kernel-2.5" -->
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-cropcap; <structfield>type</structfield> is
-invalid or the ioctl is not supported. This is not permitted for
-video capture, output and overlay devices, which must support
-<constant>VIDIOC_CROPCAP</constant>.</para>
+invalid. This is not permitted for video capture, output and overlay devices,
+which must support <constant>VIDIOC_CROPCAP</constant>.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-dbg-g-chip-ident.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml
index 4a09e203af0..4ecd966808d 100644
--- a/Documentation/DocBook/v4l/vidioc-dbg-g-chip-ident.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml
@@ -258,18 +258,9 @@ could not identify it.</entry>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The driver does not support this ioctl, or the
-<structfield>match_type</structfield> is invalid.</para>
+	  <para>The <structfield>match_type</structfield> is invalid.</para>
 	</listitem>
       </varlistentry>
      </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml
index 980c7f3e2fd..a44aebc7997 100644
--- a/Documentation/DocBook/v4l/vidioc-dbg-g-register.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml
@@ -247,15 +247,6 @@ register.</entry>
 
     <variablelist>
       <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The driver does not support this ioctl, or the kernel
-was not compiled with the <constant>CONFIG_VIDEO_ADV_DEBUG</constant>
-option, or the <structfield>match_type</structfield> is invalid, or the
-selected chip or register does not exist.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
 	<term><errorcode>EPERM</errorcode></term>
 	<listitem>
 	  <para>Insufficient permissions. Root privileges are required
@@ -265,11 +256,3 @@ to execute these ioctls.</para>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
index 4e0a7cc3081..7769642ee43 100644
--- a/Documentation/DocBook/v4l/vidioc-dqevent.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -81,6 +81,13 @@
 	  </row>
 	  <row>
 	    <entry></entry>
+	    <entry>&v4l2-event-ctrl;</entry>
+            <entry><structfield>ctrl</structfield></entry>
+	    <entry>Event data for event V4L2_EVENT_CTRL.
+            </entry>
+	  </row>
+	  <row>
+	    <entry></entry>
 	    <entry>__u8</entry>
             <entry><structfield>data</structfield>[64]</entry>
 	    <entry>Event data. Defined by the event type. The union
@@ -110,8 +117,16 @@
 	    <entry>Event timestamp.</entry>
 	  </row>
 	  <row>
+	    <entry>u32</entry>
+	    <entry><structfield>id</structfield></entry>
+            <entry></entry>
+	    <entry>The ID associated with the event source. If the event does not
+		have an associated ID (this depends on the event type), then this
+		is 0.</entry>
+	  </row>
+	  <row>
 	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[9]</entry>
+	    <entry><structfield>reserved</structfield>[8]</entry>
             <entry></entry>
 	    <entry>Reserved for future extensions. Drivers must set
 	    the array to zero.</entry>
@@ -121,11 +136,7 @@
     </table>
 
   </refsect1>
+  <refsect1>
+    &return-value;
+  </refsect1>
 </refentry>
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
index b0dde943825..af7f3f2a36d 100644
--- a/Documentation/DocBook/v4l/vidioc-encoder-cmd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
@@ -180,8 +180,7 @@ Pictures</wordasword>, rather than immediately.</entry>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The driver does not support this ioctl, or the
-<structfield>cmd</structfield> field is invalid.</para>
+	  <para>The <structfield>cmd</structfield> field is invalid.</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
@@ -194,11 +193,3 @@ the encoder was not running.</para>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
index 1d31427edd1..1d31427edd1 100644
--- a/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml
diff --git a/Documentation/DocBook/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
index 71d373b6d36..71d373b6d36 100644
--- a/Documentation/DocBook/v4l/vidioc-enum-fmt.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml
diff --git a/Documentation/DocBook/v4l/vidioc-enum-frameintervals.xml b/Documentation/DocBook/media/v4l/vidioc-enum-frameintervals.xml
index 3c216e113a5..5fd72c4c33e 100644
--- a/Documentation/DocBook/v4l/vidioc-enum-frameintervals.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-frameintervals.xml
@@ -254,17 +254,6 @@ enumerated.</entry>
 
   <refsect1>
     &return-value;
-
-    <para>See the description section above for a list of return
-values that <varname>errno</varname> can have.</para>
   </refsect1>
 
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-enum-framesizes.xml b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml
index 6afa4542c81..f77a13f486d 100644
--- a/Documentation/DocBook/v4l/vidioc-enum-framesizes.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml
@@ -267,16 +267,5 @@ application should zero out all members except for the
 
   <refsect1>
     &return-value;
-
-    <para>See the description section above for a list of return
-values that <varname>errno</varname> can have.</para>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-enumaudio.xml b/Documentation/DocBook/media/v4l/vidioc-enumaudio.xml
index 9ae8f2d3a96..ea816ab2e49 100644
--- a/Documentation/DocBook/v4l/vidioc-enumaudio.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumaudio.xml
@@ -68,19 +68,9 @@ until the driver returns <errorcode>EINVAL</errorcode>.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The number of the audio input is out of bounds, or
-there are no audio inputs at all and this ioctl is not
-supported.</para>
+	  <para>The number of the audio input is out of bounds.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-enumaudioout.xml b/Documentation/DocBook/media/v4l/vidioc-enumaudioout.xml
index d3d7c0ab17b..2e87cedb0d3 100644
--- a/Documentation/DocBook/v4l/vidioc-enumaudioout.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumaudioout.xml
@@ -71,19 +71,9 @@ signal to a sound card are not audio outputs in this sense.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The number of the audio output is out of bounds, or
-there are no audio outputs at all and this ioctl is not
-supported.</para>
+	  <para>The number of the audio output is out of bounds.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
index 476fe1d2bba..476fe1d2bba 100644
--- a/Documentation/DocBook/v4l/vidioc-enuminput.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml
diff --git a/Documentation/DocBook/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
index a281d26a195..a281d26a195 100644
--- a/Documentation/DocBook/v4l/vidioc-enumoutput.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml
diff --git a/Documentation/DocBook/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
index 95803fe2c8e..95803fe2c8e 100644
--- a/Documentation/DocBook/v4l/vidioc-enumstd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml
diff --git a/Documentation/DocBook/v4l/vidioc-g-audio.xml b/Documentation/DocBook/media/v4l/vidioc-g-audio.xml
index 65361a8c2b0..d7bb9b3738f 100644
--- a/Documentation/DocBook/v4l/vidioc-g-audio.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-audio.xml
@@ -164,25 +164,9 @@ tuner.</entry>
 	<listitem>
 	  <para>No audio inputs combine with the current video input,
 or the number of the selected audio input is out of bounds or it does
-not combine, or there are no audio inputs at all and the ioctl is not
-supported.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>I/O is in progress, the input cannot be
-switched.</para>
+not combine.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-audioout.xml b/Documentation/DocBook/media/v4l/vidioc-g-audioout.xml
index 3632730c5c6..200a2704a97 100644
--- a/Documentation/DocBook/v4l/vidioc-g-audioout.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-audioout.xml
@@ -130,25 +130,9 @@ applications must set the array to zero.</entry>
 	<listitem>
 	  <para>No audio outputs combine with the current video
 output, or the number of the selected audio output is out of bounds or
-it does not combine, or there are no audio outputs at all and the
-ioctl is not supported.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>I/O is in progress, the output cannot be
-switched.</para>
+it does not combine.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml
index d235b1dedbe..01a50640dce 100644
--- a/Documentation/DocBook/v4l/vidioc-g-crop.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml
@@ -122,22 +122,5 @@ for &v4l2-cropcap; <structfield>bounds</structfield> is used.</entry>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>Cropping is not supported.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-ctrl.xml b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
index 8b5e6ff7f3d..5146d00782e 100644
--- a/Documentation/DocBook/v4l/vidioc-g-ctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ctrl.xml
@@ -117,6 +117,13 @@ because another applications took over control of the device function
 this control belongs to.</para>
 	</listitem>
       </varlistentry>
+      <varlistentry>
+	<term><errorcode>EACCES</errorcode></term>
+	<listitem>
+	  <para>Attempt to set a read-only control or to get a
+	  write-only control.</para>
+	</listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml
index d733721a751..7940c114939 100644
--- a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml
@@ -97,14 +97,8 @@ If the preset is not supported, it returns an &EINVAL; </para>
 	</tbody>
       </tgroup>
     </table>
-
+  </refsect1>
+  <refsect1>
+    &return-value;
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml
index d5ec6abf0ce..4a8648ae9a6 100644
--- a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml
@@ -212,12 +212,7 @@ bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_H
       </tgroup>
     </table>
   </refsect1>
+  <refsect1>
+    &return-value;
+  </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-enc-index.xml b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml
index 9f242e4b294..2aef02c9044 100644
--- a/Documentation/DocBook/v4l/vidioc-g-enc-index.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml
@@ -192,22 +192,5 @@ this mask to obtain the picture coding type.</entry>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The driver does not support this ioctl.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index 3aa7f8f9ff0..5122ce87e0b 100644
--- a/Documentation/DocBook/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -250,6 +250,13 @@ These controls are described in <xref
 These controls are described in <xref
 		linkend="fm-tx-controls" />.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CTRL_CLASS_FLASH</constant></entry>
+	    <entry>0x9c0000</entry>
+	    <entry>The class containing flash device controls.
+These controls are described in <xref
+		linkend="flash-controls" />.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>
@@ -294,6 +301,13 @@ The field <structfield>size</structfield> is set to a value that is enough
 to store the payload and this error code is returned.</para>
 	</listitem>
       </varlistentry>
+      <varlistentry>
+	<term><errorcode>EACCES</errorcode></term>
+	<listitem>
+	  <para>Attempt to try or set a read-only control or to get a
+	  write-only control.</para>
+	</listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
index e7dda4822f0..055718231bc 100644
--- a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
@@ -446,28 +446,11 @@ overlay.</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The framebuffer parameters cannot be changed at this
-time because overlay is already enabled, or capturing is enabled
-and the hardware cannot capture and overlay simultaneously.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The ioctl is not supported or the
-<constant>VIDIOC_S_FBUF</constant> parameters are unsuitable.</para>
+	  <para>The <constant>VIDIOC_S_FBUF</constant> parameters are unsuitable.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml
index a4ae59b664e..17fbda15137 100644
--- a/Documentation/DocBook/v4l/vidioc-g-fmt.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml
@@ -184,29 +184,13 @@ capture and output devices.</entry>
 
     <variablelist>
       <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The data format cannot be changed at this
-time, for example because I/O is already in progress.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-format; <structfield>type</structfield>
-field is invalid, the requested buffer type not supported, or
-<constant>VIDIOC_TRY_FMT</constant> was called and is not
-supported with this buffer type.</para>
+field is invalid, the requested buffer type not supported, or the
+format is not supported with this buffer type.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
index 062d7206909..062d7206909 100644
--- a/Documentation/DocBook/v4l/vidioc-g-frequency.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
diff --git a/Documentation/DocBook/v4l/vidioc-g-input.xml b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
index ed076e92760..08ae82f131f 100644
--- a/Documentation/DocBook/v4l/vidioc-g-input.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
@@ -75,26 +75,9 @@ querying or negotiating any other parameters.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The number of the video input is out of bounds, or
-there are no video inputs at all and this ioctl is not
-supported.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>I/O is in progress, the input cannot be
-switched.</para>
+	  <para>The number of the video input is out of bounds.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml
index 77394b28741..01ea24b8438 100644
--- a/Documentation/DocBook/v4l/vidioc-g-jpegcomp.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml
@@ -159,22 +159,5 @@ to add them.</para>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>This ioctl is not supported.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-modulator.xml b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
index 15ce660f0f5..15ce660f0f5 100644
--- a/Documentation/DocBook/v4l/vidioc-g-modulator.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-modulator.xml
diff --git a/Documentation/DocBook/v4l/vidioc-g-output.xml b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
index 3ea8c0ed812..fd45f1c13cc 100644
--- a/Documentation/DocBook/v4l/vidioc-g-output.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
@@ -76,25 +76,9 @@ negotiating any other parameters.</para>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The number of the video output is out of bounds, or
-there are no video outputs at all and this ioctl is not
-supported.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>I/O is in progress, the output cannot be
-switched.</para>
+there are no video outputs at all.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
index 392aa9e5571..19b1d85dd66 100644
--- a/Documentation/DocBook/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml
@@ -311,22 +311,5 @@ excessive motion blur. </para>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>This ioctl is not supported.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-priority.xml b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
index 5fb00197864..8f5e3da7002 100644
--- a/Documentation/DocBook/v4l/vidioc-g-priority.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-priority.xml
@@ -120,8 +120,7 @@ recording.</entry>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The requested priority value is invalid, or the
-driver does not support access priorities.</para>
+	  <para>The requested priority value is invalid.</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
diff --git a/Documentation/DocBook/v4l/vidioc-g-sliced-vbi-cap.xml b/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml
index 10e721b1737..71741daaf72 100644
--- a/Documentation/DocBook/v4l/vidioc-g-sliced-vbi-cap.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-sliced-vbi-cap.xml
@@ -246,19 +246,10 @@ line systems.</entry>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The device does not support sliced VBI capturing or
-output, or the value in the <structfield>type</structfield> field is
+	  <para>The value in the <structfield>type</structfield> field is
 wrong.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml
index 912f8513e5d..37996f25b5d 100644
--- a/Documentation/DocBook/v4l/vidioc-g-std.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml
@@ -82,14 +82,7 @@ standards.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>This ioctl is not supported, or the
-<constant>VIDIOC_S_STD</constant> parameter was unsuitable.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The device is busy and therefore can not change the standard</para>
+	  <para>The <constant>VIDIOC_S_STD</constant> parameter was unsuitable.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
diff --git a/Documentation/DocBook/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
index bd98c734c06..bd98c734c06 100644
--- a/Documentation/DocBook/v4l/vidioc-g-tuner.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml
diff --git a/Documentation/DocBook/v4l/vidioc-log-status.xml b/Documentation/DocBook/media/v4l/vidioc-log-status.xml
index 2634b7c88b5..5ded7d35e27 100644
--- a/Documentation/DocBook/v4l/vidioc-log-status.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-log-status.xml
@@ -37,22 +37,5 @@ was introduced in Linux 2.6.15.</para>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The driver does not support this ioctl.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-overlay.xml b/Documentation/DocBook/media/v4l/vidioc-overlay.xml
index 1036c582cc1..250a7de1877 100644
--- a/Documentation/DocBook/v4l/vidioc-overlay.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-overlay.xml
@@ -65,19 +65,10 @@
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>Video overlay is not supported, or the
-parameters have not been set up. See <xref
+	  <para>The overlay parameters have not been set up. See <xref
 linkend="overlay" /> for the necessary steps.</para>
 	</listitem>
       </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
index f2b11f8a403..9caa49af580 100644
--- a/Documentation/DocBook/v4l/vidioc-qbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
@@ -158,15 +158,6 @@ or no buffers have been allocated yet, or the
 <structfield>userptr</structfield> or
 <structfield>length</structfield> are invalid.</para>
 	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENOMEM</errorcode></term>
-	<listitem>
-	  <para>Not enough physical or virtual memory was available to
-enqueue a user pointer buffer.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
 	<term><errorcode>EIO</errorcode></term>
 	<listitem>
 	  <para><constant>VIDIOC_DQBUF</constant> failed due to an
@@ -184,11 +175,3 @@ continue streaming.
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml
index d272f7ab91b..23b17f60421 100644
--- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml
@@ -61,27 +61,5 @@ returned.</para>
 
   <refsect1>
     &return-value;
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>This ioctl is not supported.</para>
-	</listitem>
-    </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The device is busy and therefore can not sense the preset</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-querybuf.xml b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
index 5c104d42d31..5c104d42d31 100644
--- a/Documentation/DocBook/v4l/vidioc-querybuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml
diff --git a/Documentation/DocBook/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml
index f29f1b86213..e3664d6f2de 100644
--- a/Documentation/DocBook/v4l/vidioc-querycap.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml
@@ -67,9 +67,8 @@ driver is not compatible with this specification the ioctl returns an
 	    <entry><para>Name of the driver, a unique NUL-terminated
 ASCII string. For example: "bttv". Driver specific applications can
 use this information to verify the driver identity. It is also useful
-to work around known bugs, or to identify drivers in error reports.
-The driver version is stored in the <structfield>version</structfield>
-field.</para><para>Storing strings in fixed sized arrays is bad
+to work around known bugs, or to identify drivers in error reports.</para>
+<para>Storing strings in fixed sized arrays is bad
 practice but unavoidable here. Drivers and applications should take
 precautions to never read or write beyond the end of the array and to
 make sure the strings are properly NUL-terminated.</para></entry>
@@ -100,9 +99,13 @@ empty string (<structfield>bus_info</structfield>[0] = 0).<!-- XXX pci_dev->slot
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>version</structfield></entry>
-	    <entry><para>Version number of the driver. Together with
-the <structfield>driver</structfield> field this identifies a
-particular driver. The version number is formatted using the
+	    <entry><para>Version number of the driver.</para>
+<para>Starting on kernel 3.1, the version reported is provided per
+V4L2 subsystem, following the same Kernel numberation scheme. However, it
+should not always return the same version as the kernel, if, for example,
+an stable or distribution-modified kernel uses the V4L2 stack from a
+newer kernel.</para>
+<para>The version number is formatted using the
 <constant>KERNEL_VERSION()</constant> macro:</para></entry>
 	  </row>
 	  <row>
@@ -280,24 +283,5 @@ linkend="mmap">streaming</link> I/O method.</entry>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The device is not compatible with this
-specification.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
-
diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
index 0d5e8283cf3..677ea646c29 100644
--- a/Documentation/DocBook/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml
@@ -156,7 +156,8 @@ signed value.</entry>
 	    <entry>Maximum value, inclusive. This field gives an upper
 bound for <constant>V4L2_CTRL_TYPE_INTEGER</constant> controls and the
 highest valid index for <constant>V4L2_CTRL_TYPE_MENU</constant>
-controls.
+controls. For <constant>V4L2_CTRL_TYPE_BITMASK</constant> controls it is the
+set of usable bits.
 For <constant>V4L2_CTRL_TYPE_STRING</constant> controls the maximum value
 gives the maximum length of the string. This length <emphasis>does not include the terminating
 zero</emphasis>. It may not be valid for any other type of control, including
@@ -291,6 +292,15 @@ the menu items can be enumerated with the
 <constant>VIDIOC_QUERYMENU</constant> ioctl.</entry>
 	  </row>
 	  <row>
+	    <entry><constant>V4L2_CTRL_TYPE_BITMASK</constant></entry>
+	    <entry>0</entry>
+	    <entry>n/a</entry>
+	    <entry>any</entry>
+	    <entry>A bitmask field. The maximum value is the set of bits that can
+be used, all other bits are to be 0. The maximum value is interpreted as a __u32,
+allowing the use of bit 31 in the bitmask.</entry>
+	  </row>
+	  <row>
 	    <entry><constant>V4L2_CTRL_TYPE_BUTTON</constant></entry>
 	    <entry>0</entry>
 	    <entry>0</entry>
diff --git a/Documentation/DocBook/v4l/vidioc-querystd.xml b/Documentation/DocBook/media/v4l/vidioc-querystd.xml
index 1a9e6039309..4b79c7c04ed 100644
--- a/Documentation/DocBook/v4l/vidioc-querystd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-querystd.xml
@@ -62,28 +62,5 @@ current video input or output.</para>
 
   <refsect1>
     &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>This ioctl is not supported.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The device is busy and therefore can not detect the standard</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml
index 69800ae2334..7be4b1d29b9 100644
--- a/Documentation/DocBook/v4l/vidioc-reqbufs.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml
@@ -122,14 +122,6 @@ higher. This array should be zeroed by applications.</entry>
 
     <variablelist>
       <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The driver supports multiple opens and I/O is already
-in progress, or reallocation of buffers was attempted although one or
-more are still mapped.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The buffer type (<structfield>type</structfield> field) or the
@@ -140,11 +132,3 @@ supported.</para>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
index c30dcc4232c..c30dcc4232c 100644
--- a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml
diff --git a/Documentation/DocBook/v4l/vidioc-streamon.xml b/Documentation/DocBook/media/v4l/vidioc-streamon.xml
index 75ed39bf4d2..81cca456905 100644
--- a/Documentation/DocBook/v4l/vidioc-streamon.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-streamon.xml
@@ -88,9 +88,9 @@ synchronize with other events.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>Streaming I/O is not supported, the buffer
-<structfield>type</structfield> is not supported, or no buffers have
-been allocated (memory mapping) or enqueued (output) yet.</para>
+	  <para>The buffer<structfield>type</structfield> is not supported,
+	  or no buffers have been allocated (memory mapping) or enqueued
+	  (output) yet.</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
@@ -105,11 +105,3 @@ been allocated (memory mapping) or enqueued (output) yet.</para>
     </variablelist>
   </refsect1>
 </refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml
index 2f8f4f0a023..2f8f4f0a023 100644
--- a/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-interval.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-interval.xml
diff --git a/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml
index 79ce42b7c60..79ce42b7c60 100644
--- a/Documentation/DocBook/v4l/vidioc-subdev-enum-frame-size.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-frame-size.xml
diff --git a/Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml
index a6b3432449f..a6b3432449f 100644
--- a/Documentation/DocBook/v4l/vidioc-subdev-enum-mbus-code.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-enum-mbus-code.xml
diff --git a/Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml
index 06197323a8c..06197323a8c 100644
--- a/Documentation/DocBook/v4l/vidioc-subdev-g-crop.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-crop.xml
diff --git a/Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-fmt.xml
index f367c570c53..a67cde6f8c5 100644
--- a/Documentation/DocBook/v4l/vidioc-subdev-g-fmt.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-fmt.xml
@@ -177,4 +177,7 @@
       </varlistentry>
     </variablelist>
   </refsect1>
+  <refsect1>
+    &return-value;
+  </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-frame-interval.xml
index 0bc3ea22d31..0bc3ea22d31 100644
--- a/Documentation/DocBook/v4l/vidioc-subdev-g-frame-interval.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-frame-interval.xml
diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml
new file mode 100644
index 00000000000..69c0d8a2a3d
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml
@@ -0,0 +1,297 @@
+<refentry id="vidioc-subscribe-event">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refname>
+    <refpurpose>Subscribe or unsubscribe event</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_event_subscription
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>Subscribe or unsubscribe V4L2 event. Subscribed events are
+    dequeued by using the &VIDIOC-DQEVENT; ioctl.</para>
+
+    <table frame="none" pgwide="1" id="v4l2-event-subscription">
+      <title>struct <structname>v4l2_event_subscription</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry>Type of the event.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>id</structfield></entry>
+	    <entry>ID of the event source. If there is no ID associated with
+		the event source, then set this to 0. Whether or not an event
+		needs an ID depends on the event type.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+	    <entry>Event flags, see <xref linkend="event-flags" />.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[5]</entry>
+	    <entry>Reserved for future extensions. Drivers and applications
+	    must set the array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table frame="none" pgwide="1" id="event-type">
+      <title>Event Types</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_EVENT_ALL</constant></entry>
+	    <entry>0</entry>
+	    <entry>All events. V4L2_EVENT_ALL is valid only for
+	    VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_VSYNC</constant></entry>
+	    <entry>1</entry>
+	    <entry>This event is triggered on the vertical sync.
+	    This event has a &v4l2-event-vsync; associated with it.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_EOS</constant></entry>
+	    <entry>2</entry>
+	    <entry>This event is triggered when the end of a stream is reached.
+	    This is typically used with MPEG decoders to report to the application
+	    when the last of the MPEG stream has been decoded.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_CTRL</constant></entry>
+	    <entry>3</entry>
+	    <entry><para>This event requires that the <structfield>id</structfield>
+		matches the control ID from which you want to receive events.
+		This event is triggered if the control's value changes, if a
+		button control is pressed or if the control's flags change.
+	    	This event has a &v4l2-event-ctrl; associated with it. This struct
+		contains much of the same information as &v4l2-queryctrl; and
+		&v4l2-control;.</para>
+
+		<para>If the event is generated due to a call to &VIDIOC-S-CTRL; or
+		&VIDIOC-S-EXT-CTRLS;, then the event will <emphasis>not</emphasis> be sent to
+		the file handle that called the ioctl function. This prevents
+		nasty feedback loops. If you <emphasis>do</emphasis> want to get the
+		event, then set the <constant>V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK</constant>
+		flag.
+		</para>
+
+		<para>This event type will ensure that no information is lost when
+		more events are raised than there is room internally. In that
+		case the &v4l2-event-ctrl; of the second-oldest event is kept,
+		but the <structfield>changes</structfield> field of the
+		second-oldest event is ORed with the <structfield>changes</structfield>
+		field of the oldest event.</para>
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_PRIVATE_START</constant></entry>
+	    <entry>0x08000000</entry>
+	    <entry>Base event number for driver-private events.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="event-flags">
+      <title>Event Flags</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_EVENT_SUB_FL_SEND_INITIAL</constant></entry>
+	    <entry>0x0001</entry>
+	    <entry>When this event is subscribed an initial event will be sent
+		containing the current status. This only makes sense for events
+		that are triggered by a status change such as <constant>V4L2_EVENT_CTRL</constant>.
+		Other events will ignore this flag.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK</constant></entry>
+	    <entry>0x0002</entry>
+	    <entry><para>If set, then events directly caused by an ioctl will also be sent to
+		the filehandle that called that ioctl. For example, changing a control using
+		&VIDIOC-S-CTRL; will cause a V4L2_EVENT_CTRL to be sent back to that same
+		filehandle. Normally such events are suppressed to prevent feedback loops
+		where an application changes a control to a one value and then another, and
+		then receives an event telling it that that control has changed to the first
+		value.</para>
+
+		<para>Since it can't tell whether that event was caused by another application
+		or by the &VIDIOC-S-CTRL; call it is hard to decide whether to set the
+		control to the value in the event, or ignore it.</para>
+
+		<para>Think carefully when you set this flag so you won't get into situations
+		like that.</para>
+	    </entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table frame="none" pgwide="1" id="v4l2-event-vsync">
+      <title>struct <structname>v4l2_event_vsync</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>field</structfield></entry>
+	    <entry>The upcoming field. See &v4l2-field;.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table frame="none" pgwide="1" id="v4l2-event-ctrl">
+      <title>struct <structname>v4l2_event_ctrl</structname></title>
+      <tgroup cols="4">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>changes</structfield></entry>
+	    <entry></entry>
+	    <entry>A bitmask that tells what has changed. See <xref linkend="changes-flags" />.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry></entry>
+	    <entry>The type of the control. See &v4l2-ctrl-type;.</entry>
+	  </row>
+	  <row>
+	    <entry>union (anonymous)</entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__s32</entry>
+	    <entry><structfield>value</structfield></entry>
+	    <entry>The 32-bit value of the control for 32-bit control types.
+		This is 0 for string controls since the value of a string
+		cannot be passed using &VIDIOC-DQEVENT;.</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__s64</entry>
+	    <entry><structfield>value64</structfield></entry>
+	    <entry>The 64-bit value of the control for 64-bit control types.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+	    <entry></entry>
+	    <entry>The control flags. See <xref linkend="control-flags" />.</entry>
+	  </row>
+	  <row>
+	    <entry>__s32</entry>
+	    <entry><structfield>minimum</structfield></entry>
+	    <entry></entry>
+	    <entry>The minimum value of the control. See &v4l2-queryctrl;.</entry>
+	  </row>
+	  <row>
+	    <entry>__s32</entry>
+	    <entry><structfield>maximum</structfield></entry>
+	    <entry></entry>
+	    <entry>The maximum value of the control. See &v4l2-queryctrl;.</entry>
+	  </row>
+	  <row>
+	    <entry>__s32</entry>
+	    <entry><structfield>step</structfield></entry>
+	    <entry></entry>
+	    <entry>The step value of the control. See &v4l2-queryctrl;.</entry>
+	  </row>
+	  <row>
+	    <entry>__s32</entry>
+	    <entry><structfield>default_value</structfield></entry>
+	    <entry></entry>
+	    <entry>The default value value of the control. See &v4l2-queryctrl;.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="changes-flags">
+      <title>Changes</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_EVENT_CTRL_CH_VALUE</constant></entry>
+	    <entry>0x0001</entry>
+	    <entry>This control event was triggered because the value of the control
+		changed. Special case: if a button control is pressed, then this
+		event is sent as well, even though there is not explicit value
+		associated with a button control.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_EVENT_CTRL_CH_FLAGS</constant></entry>
+	    <entry>0x0002</entry>
+	    <entry>This control event was triggered because the control flags
+		changed.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/vbi_525.gif.b64 b/Documentation/DocBook/media/vbi_525.gif.b64
new file mode 100644
index 00000000000..d5dcf06f2ae
--- /dev/null
+++ b/Documentation/DocBook/media/vbi_525.gif.b64
@@ -0,0 +1,84 @@
+R0lGODlhKgPIAIAAAAAAAP///yH5BAEAAAEALAAAAAAqA8gAAAL+jI+py+0Po5y02ouz3rz7D4bi
+SJbmiabqWgJs475LLCt0fdy4oeN9/QPuEEFZkXVcJZXDXNP5pC0TgGrMSrRMidhA1/uNbB9j2CZ8
+Kc+qHDXDTT2jK3BuPau13vFpdmc/p6Uh5SeYoXMHyFNomEeYiNEVKCFFx8Wz2Eh56YWp2bfnGXk1
+OEhaKnem2rYa6vp3KIqaBhULmsk4Ufc1KTbq4rfbhxkcOQx22limZ4P8STYH3PsGu8pqe439aw36
+eji9qT1rGCpraf5MkQynyJeuG0c73imvLYzuUAwF/P6WTK8vHDdj2Qia8hYL4bF2o/CpmydOXa6I
+uqQNPFepny/+d+cM0qsH8qNGCI8M3gvG7KG8iSJJVoNIp1w5h/C+gSPjgWE9hR0Lqmzp0RFPjLV+
+hoRki2XNPJyCVmy2U6KnHm6WnboRcOPFkS59xqQpEKZRpkDHfi1rdqlXgTMVKVVL7h/cnmi1rtxq
+t27Yn1n5xrySUi81iYAlvR2MN23Fm/nkyHzp9G9iSof3Ps1pE3PmyV2dhaSL1Jiee3/ZjI5Mkhlj
+xDPXGnkClgns1pxV0K6d4rbYF7pRv44CW7Dtojt6f/YxO7hxrrmVJ3/eZDnd4tCjVw+OPbv27dy7
+e/8OPrz48eTLmz+PPr369ezbu38PP778+fTr27+PP7/+/fz++/v/D2CAAg5IYIEGHohgggouSNFv
+1l2HHIRCACehgw9eOIR0001I4YVq8MJIVZItUpJiG564GG75VJaXb5aVthtljwnV1mauyXijVqtB
+FVRoK7Foxi0kNphaYdhYNRUxQMZDWZKd9IXTQTmmFluUDQln5TcqBrnlYEOhaGJXNZrUpR24sLPN
+kC6uaBGWMywERpWISeUZacIE5iZH8OApJ3FrtvhnY5AdR1iZVOw4p1BTZhljlGNG1aijfgIKl4+f
+kNZjoIL2ySOacX4kYlyyfDgooWBSWmikOH15mU5ksfqiqUVqNsySXN7FqZ5jWdoTr7sSqaOtTH6Y
+EajMNZX+kbC53qopDDMuymhprgLbGaTUbgrtm8smCqOqQRYbZrV58vijtzZgNW2TTHZEag7rHFuU
+Pp4aSq6sc9EJa7jinpVuq/Ruy+xSj9KibL0YyRXrXr7WlC+242qrDMJsEYYSVvAiUzGJwg7c7BqI
+GjyiuQ5f7PG/7j57VqkpqryyyJ0WDDBxC29ymr3+YFEzyRpLE5qG91qYYYVAR4hh0B0WTbTRR1Mn
+NBKTDs0h0lErTTXTSyddNdZabw311ET7nLDTTct2tddmn82bc2V3zbbYazMId9xyz0133XbfjXfe
+eu/Nd99+/w144IIPTnjhhh+OeOKKczcR2CYvDnnkkgf+XoTF2eUCs9uTb85554MrVUjmJGDuuMue
+n4566gKyxM+T2L37cNqqz0577QG2/ikpVxEie7LflW578MIPL1vroVdifOy3outkscD/THz00k+v
+ne46ApQT70o2ZWz1RT5Pffji2w4YWcqLkrzvMhNT/Wjuvy/6+PLPL/w/854vr+t58gP+vufySb8A
+CnB8phEBmo7nhDHwz3vQGKADH0jAT4UgVGZQILjeBsEManB6GqKgP+h0vtFtcIQk5KAJpqAa/znL
+Xc4CXv9KCMP2fMyA8fvDDCdYwzbg7IQbwZ0IqeHCGArRbj4UwgvxgDJSHXEfIUQVEpuIqiLycIhU
+jJv+FNO2RCeJQ4kPuuIHUMi+Kb4piFUso4K8yIQsYm8cIlKj9VrQQyiqUH9mrOPm0DgcN8YsXoLQ
+Ix1HAMY/ArKCdiyk5PDYHD+6qo1dlOPItIXIG0XSkJT02yR5qEg2EqyRHYyjzyrnyEqK8oyhTEgj
+7bFJo13SI2EwzCdDhDP4yXKWtKxYLWWJsVu+L5e6rFkv4bezX9pSmDd0XzdgZkwa7SJnFDMNMX35
+TFdGM5jE5GU1o4kn1WDzmXbg2TaFaSZrgvNks+ymOL9Jy3DesGUiSd5wmEhGt5SiHUipp+naCZL7
+6ZOV+WyixMJhT1MKlJ+CFCP2nmexf9plCZZbJWT+3Cm7MJIxSfGcp0WTglGC9CtL+9RERz3aT3pm
+FFeiuShBHcqNN75ToqjkaBhXqr8XJnSPIC0oHP2JU5FqdKQ2g5jyLNerfgo1qDolKTlMmsqTlrJa
+Km1OAmOGCKa+1KkstRBEUdDQpUpqoEk1KlF2ei2fftQoYyVrSFERUK9aQp4tRakmbXrTqtbUpXD9
+oVw1d9UTZLWiXO0jWnn61Y7xca5mJWxhifpXsKr1IWxV6kQPitc1GnZOTcVqFhRq0Lxmdqp6palb
+L5vYxQL0nkA9rGnVgql9FvWoiu2qX9uqVWxVtrNP/em6lsdZ2t6VbE9ap1B9y9qS9jWwwS2uzvD+
+OdmFDjWoIF0tcZ+7VqTWFLjMpS5Ri6krsaoJpt6M2hFLK7bGuha6DAPsqSi7XNSmV73NDa1xVSLe
+1xLUqlaLbViWCF7vJu27ns2pe8k72rCSq6z3XW+B22ve8rZWvuM9LW/xm13LPo2q9mUufScU3+gm
+OMCiDRtukytVEIcYsRuO44I1LNz5RrTCytXvfo/G3wnTNsOM/S98S+zED1vYwS0WsWxxGkLMbjXF
+DWbvhV185CS/GMm9ky6KOywmHM/xxz7WMY97bFbn3vjENR7ulSVM05QumcljXnGMabwnGysYylO2
+spG/TOUqo1fLa35vl4ksZ7uyeMRmrq8akav+5OI5+c5sFlRaezpgA/P5zXDGLZ05bOc0e5nRD/Zz
+mfscHWYiQdNKAK6n4wfAxSTi09wk5zipqctunvqct1T1L8P5i1GLLtTsdMRBrBvrHNoE18fEL6dH
+CexgC3vYxC62sY+N7GQre9nMbraznw3taEt72tSutrWvje1sa3vb3O62t78N7nCLe9zkLre5z43u
+dKt73exut7vfDe94y3ve9K63ve9t7SBkNdH47re/9Qq6CAP63wQvuGZ2mYneFoPWBm+4w8VUWiMB
+5IIPr7jFX2a/YCZ8zxfvuLnf1VB5QcnjJDd4YTKucN3xuuQsb7nLXw7zmMt85jSvuc1vjvP+nOt8
+5zzvuc9/DvSgC33oRC+60Y+O9KQrfelMb7rTnw71qEt96lSvutWvjvWsa33rXO+6178O9rCLfexk
+L7vZz472scG0vllD24rZzrW28bbtcl873N2uObUfqkQzJFaJPAO9Fm53W34/mcbO+7/t9j1ksfzY
+MiUO+DaXDPCLT9VpKr8yZnpQDM50JcmkyTOdNT5Enx8mxhAPaxApq/CULxjFV9S8kT9yhWts0zL4
+JVnX44uigl1481Cf8KsI3Kf+Er6biMXS18/+gy2JJfBzFw/Mc35U0NcXJxAh+4A1ENC69xdoER38
+34Mf+sZvF/5OP3yQ+QKAt8+14Z9/2dH+H3dnh4d/Als5f1MzMcdsCoj5SfwwqXVb/Mca6qd9WBaA
+R/J+1qddDHeAUZZy85c+mOcp/ndc5QMqGyMawrd5ACVx/8dYKrcsFQg7DAhEu6NAG7g9q3cU3RN4
+zBJV9jdwsXM/GQiCRuZWNWh7Msh3QmaAhoYSIyhja1ALbQJ/obM+L0iExvJry8d8LpiAuPdSN7h9
+3VOD3kdHW1AVsOOAxEclTySEIIQOHViF7XSFZQgUVFiGj8CCYpiGR+g8Axgt24c8Q9gpvTJbHjZg
+IjguFJQVZChbH2h/2rODJjgqxieDGTiFevgyFKWGAYOBj8gtVPF564IpLRKJgziAgAj+ieFniNxX
+fUo4LPcXhn2YEqMnif+TMYNHgKoWeTTYTGoifZzXeAsoivpXJ2f4PaHHik7oMZ1ni4yIi8fDib+I
+gen3g6pohE34gMa4cbO4ixJkh8m4d0HYi5Lniq1XjMqojcqgd2AmNXVnd3g3juRIYXT3dnGXjuZ4
+jl/zjboVjuvIjvB4d/NoUOiYd+qYj/Z4j+6IQXNXj/IojuAYkAK5j/yoZwV5kAa5kA2Zdg8JkREp
+kRNJkRVpkT73ZxwnjASpjwCJkIP0jv3Yke34kSAZjww5kPQ4kiSZkipZkhOkNifpkOWIkjQ5kzZJ
+NqyXi9uYeIrXho8TZtTlCjnEMfn+Z07jN3n3hIuC1ZNKeY2JiD6Zs0gC5iWzliav+Inv51vKx3wo
+WIrTV3uh2IqC9zjZN5ZL2DBgSZW+iI2GBpTT2IwmtpajqJSGIY232JRbuQ1myZZoKZZZmTt8ySV3
+ggapWEHRAJjU2JaL6YVMKYepMpe/GJlH6ZTI2Jdu6ZRcuZGQBJePqTCTmYRG2XyO6Q52Ui5QuJn7
+sA4amC2XOYeJCWukWVugeX2y+ZeiGZSO0ZrncpdGWYKwOZq2mV94SXwzEyymCULIo4u0h5rt95ZD
+uZuuyS2xSJuNeZZ3WJlhBmRQBAhCGVrLmRfGCXF1yTyg2ThkQlZ5eJ3lWYipOZ3+UKmd/uSDrwmf
+ciSY76kuacmY+Hk9lWmEwumJ8BmDSBl9/zKgpEmI6CkjGcOM/MmN3QicnRmX0OBpuvmW3GlD4jkr
+QEmUFuqfHXokUjkPGtoYDSqd+meiE+qMehmf0ZmQComTHtmScSWTMWqjHPmSMPmPMhpRGemjMYmP
+N4mjM0qjMHqjLkmkL5qjIPCjLXqhLqqkSWqSQXqkSFqTLHmlVpqlIrmkF+mlXwqmYSqmY7puiEim
+Zzogj4GEaMqmAIIQmtmmcTofbyqhcqp0GSlD1gCndvpvuqYldSU3dOqkfJpun/VFt1md5sFQjOKn
+hFpu+dObKVMXUnSMx5AfDBX+agfqqH0qQQtkCrMZf81gqBvnmemBTZtacuCyp98yFbyAD/NJSLiD
+p4dKoSuHqu62qJHqlpTYJ5AgcvKBqbfqclroUOUZBynoFP/pHrMqrI8KL2CErB1YQPHBrM06bjwJ
+lxsDJCkkqgD3WNZ6Ro16lT5gq0JCnBPGrfs5SerJcaOKm+BaH+4KC5kkZoR2nTTBrixToKCESTwK
+r2mqkatySi1lr/uJr7nFpJ6kooMWpf8KsHpErwQraed6sIAKLez6SQHrsHAjr6wQsSpGMzzIqp0U
+ZfwKR9W6sfzRsarwsXnWrYDJryurohjbWSibsvohs5MmaBI7se45qQhLq5L+YrIiZLM3ix85i2e/
+oRMHJLJesmfoArVPyWqldnivNrW1hGqvhk5Xi7VcW05ei0u9JrbKNLbS8nioyE1bC7bAtLYIt7Xo
+BLfmBLdWW7Vz20vq9E2mFrZ1u2qihrcdRHq19Vj5CoaFVqIMC2kAdq/U57KWqGh0hWBJu2WG67Q6
+y11AO6WEq6O71WjIhbRSBaubG1OVZrH7R7lAhLhyGWmLO4MHtmOUhoDqhWaJO7mru34YorlBC1mV
+Frr8RmWf61K9q7uaRaO5K1m26xKzq7qKa7CM+7qu27nadVaWC4GnCxXKS2HG+1CYm7nHG717FVnC
+Syuje7mlq0XIK7DUO2T+6Luwvhu97gu7iya7qVu97Fu5khtZ5ju+2ru94uu8v6ux1Oe/BUG8ema8
+A+y9T8Zg9suZCGqZjtu4pfm4wUu/68u8FqzAFwa8H7bBjgZVyAi+vDuo8xvAIVy/F5y++Eu7dZaI
+wym/sQvDL6xc2IvBLFy7C6zBJfxECPV9BIZe+ru/CZy96DfEWHm/DDxGFYyZ1luqcfa+EPy8MQy6
+SsyqXLbCPeti5fq74gq62JWtSMTFwavFUgyPFShlKVxkV7y8ienCkPvEEhzBEkzDS4zEBaq+ZXxp
++RtopEs1MQYwCIzAQJzEZ1zFBPq/8evGiOzEWUbFR4zChZzG5bvHkoz+aWRmyZRsw5mMxRl8w51M
+sYcMvYrsZqFMwiq8xpp8yptcyavMynw8yXrcyqksy7d7x5D8yA46ymScyzKcyKUcySfsyWpMy5Z2
+yZjsyrGMzOBoxlYcsrXsyMHMum28yKSsyz8cub9cw8Kczc1MzK+szHl8zMX8zXVcuNh8uIT8zJ/c
+utUsvVHMyxTszA3MxOWMw8mMx+BcxOIczsY8y9s8zOZsy9DcvOv8zrvcy+zcgI0sz+RsugBdvPic
+z/Z8zxmSoqNT0aq4a1JiI92Q0bm2aqeqt3cb0qk20q1W0iYttbR4ax3N0RsNBBdNQ114QjCNQzLd
+AjRttDmt0zvN0z1u7dM/DdRBLdRDTdRFbdRHjdRJrdRLzdRN7dRPDdVRLdVTTdVVbdVXjdVfVBkx
++APSnNU5bZaaCsVfPdQnR8TkJwlnTdZAnSwXJIidutZBHbhrqpqnuKpx/a9c3RdvndZ43dO+pCSY
+E9gqF8bNWgAAOw==
diff --git a/Documentation/DocBook/media/vbi_625.gif.b64 b/Documentation/DocBook/media/vbi_625.gif.b64
new file mode 100644
index 00000000000..831f49a0282
--- /dev/null
+++ b/Documentation/DocBook/media/vbi_625.gif.b64
@@ -0,0 +1,90 @@
+R0lGODlhKgPIAIAAAAAAAP///yH5BAEAAAEALAAAAAAqA8gAAAL+jI+py+0Po5y02ouz3rz7D4bi
+SJbmiabqWgJs475LLCt0fdy4oeN9/QPuEEFZkXVcJZXDXNP5pC0TgGrOCqVMidhAVdqVbLmx73Wc
+FXfNabGFzfbG3Rz0bDO/2G1hzJ7o8ceT56dB+Gb4JciD16fnh3VI97bmOCE4tyhVUSbHKOlg1xnp
+6aWFKDfaecrqQlrK2vqK2bjImPFaiLuKuxvY+2HLq1tniHcLzFmWy6mnitxMeWs5iaZo0xZhTahj
+rdzXHa3m6Eod+h1+LW7MXpx83P7962y+ju4O//5oGr8PHUvs36VjoCBsujTsxp5t0MIB1MZLYb07
+CBt+QlWRHz/+Zto62NLYD+Ouj7Q+ZlMj0J80kCr1iaSHT6WmeAXPAXOVzNs0hw8fHAwzkeLATz9E
+xVo2qCa2o7AA9Wz5cmXIgFAhKu2Yb2q1rFSrDmUZFeUgrQaLdhWriFZKGKt6LNTSlopXthevrIUB
+d9rSp6FGcbnLwCRYe2ELo+VK+CxEwF9XkoypeCtZn05dTiqlNupMxnyWxXkL17OVtHz7loMTdO+4
+pGsMsz0dKbVcyK7LXsWbyKSweTA95qatDHho4T7TqqsdWN1toaFbExNMHMkTzimgR2cSZfpgI9qt
+T8aePbz4IQebeLcsZDz56ecjv2g/9z37+fTNd6+vPb/+/fz++/v/D2CAAg5IYIEGHohgggouyGCD
+Dj4IYYQSTkhhhRZeiGGGGm7IYYcefghiiCKOSGKJJp6IYooqrsjidyrAh9yL+K2nng/31WgjjtzN
+mKOO8lFHxhlJxRjkkEY2tloWy51k2mxAVoaQQkImRiRuIyEmD5ZIomeVYMLIZhMkS6rWm4vJecZl
+cWBsRomUz+Vlymg4bWflYnGWo5FOGZ02FphPYmbkmHQmRxRSgzJXpntl/UlmcIca5ItvilJJx2OS
+TkrZo5k6CgemfBDFKJPF7ZRTIZsMgxUip4qKKFN5UropSKD54xasW9p6a65VBiYmb/dc2qZuwMaH
+laXvZEb+FbKPCKpkm68KutBoTshZWpN6MRqtm6H+8ZmTulabqplhXikuNtBhgqqnM6SLa7jE2nZd
+rGzK5CeUqMxJq6l2YavvTn6yGVG7zGn77aZgvOvuruvGexnCndXLq5YCC2Vsmg2LUzGcTSm8r7fg
+0pUKxMgwdOdY/O4JaMkFf/pqyiv/Jau9CY/asqatOlwnzuM6JvHMOsPsZaQZ/3zzV0NfdnS4HL3c
+KsBZpnIk01NCHbXP1o4MsSjgyAzp0xsddzHRHqOz2289d83wmb46e/aibauZNhXGMWuz3KjNG6Vz
++fooHY/p8Q0ejYDL6PeO9hX+4+DVsRr4DjByPMLjE5v+ILnUJ1Qe9t+Cb855j4d/jrnVfSuOQuii
+N+5555qrbjjrrTt+Y4uyz0577bbfjnvuuu/Oe+++/w588MIPT3zxxh+PfPLKL8+87rWGYLqI0TdP
+ffWwM249oXKDgC/y02cPfvgkkPJ97t137075HKovfvvuQ1KXh9zKJ6V37A7P/vv6739Oa0BFnoRK
+QG9+2PlJMLDnu/zxb4EMxJPJ/DLA/sXvF0EogsgG5hQDkupeCOydAhkIwvcdAYJeqYdfymOMCvLK
+Swe7yKqgkLU4dZB3AaRbCG8YwhrOEGazUaHJNuKboqjQaRBMSDrqBkOu4W9uTAQbDp8IRSV2jFtm
+2Y7+thwIDyzi64VIBKIMvQip+/Gwit5Tkw2jiMbsGcVRPfyhBTdGq7gY6ovoG1UL6ximJSwtVLjT
+YRr/mMZZFctJRZSgLswiR73gMWcsqw0Jx0a8DwJyksAj4CCjRr7T2aSCiQTiIiMGsvg8UorBkyQl
+T7k7S3aNXQJEm2lWxcl9bRGFnWFM2TAIyuOZEpUpOqNHLhgMX9ahXqq02xZTQrCdRQyWdpolq+Yk
+uTdqMoG8BOEnZSSsHYLRRmukFAnFGKOA2ayVsBjhNkUgTVcab5fVNNE1F5fNk33wnY2y2iOBWbQ2
+8rFj9axLNBmZy3W2c4H0vFwXcTmUeXaxmBmUlf3+LkmSdJprn5kb50AvWruCUu6g3gKNQrtZmns+
+dJUU/WE/6bjRgAIUoyx1J0e599I0eNQ+INXVPaEH0ZTeAZzE2QI7WwrU7Hw0KzNdT00rOkqckjSm
+9jynUvMJyaBKVX5MDSJN9jHUj+UzqTCdGtWcOECJyAmf8CqSbWDTxLSiVa1MZA1b5+bWt5ImZHI1
+Dj2YZddgiSyvel1rXc3w17bSNbCiIWxhDUsGwyoWbNdYrGITO1jCJjatRXIsYs/gV7betbJkhZtM
+ndqChkaPJ6fYTdk2g9pyQUmVrJVJQDS6Qnak9pBX1RxXxyfa2o4LmoG7LW6nVdJjgfa3imzc/Ez+
+K9ubKNdiuWytSJz7XKbCliKzxapuE+fJ3k5wHVOoX3AB4tvIAYKnxEUp4Yp7Xj5Od6LLtS5tmYtQ
+8Lo2uq5Fbns5+N7Xei68T82ufl3J2/Tyt78Bxm6BS5fb9HJ0vXI57X2jcUv50pe7842uffOLX/f+
+t3UDPmAS59Xd8X63MR32sD9tO1zxfti4y0phcjEMYdV+dsISpnB9XfzgVuS4xgberk79S+Pdphid
+CRbwkEML3KpKmMH6OC6OYaxjKGtVNdDlMYn1e2ENZ3jLQdbuFxe34grL68hdRa+RyaviQo02g51F
+kpN74WApV0rGFumy0sQs3yxzOcpatjOY/eX+Zbols06wCXSbrwzWPyt5w9hdsHQfHVM0L5POMfPz
+mC09Zj3HWM6XZPToFo3nT7Nv0F7e3KhJ+WNHa5rPe04opUkN4FDf+cZwfnGfWY3pH59am2UGda51
+PZ5dj7glb+4Xp5d66yl3VNax/nVzHx3nZM9ZuCiutrV7vN9gZ3t1xW7xjqct7YoK2dlUZnasV+3q
+Y2cqwsL2tY2vLerrDfu68ea2t40dbmS32nIzfreVkYblJ+d73d8GOLxLzeFtHzzhC1e0qgW+705H
+fJrlJveyLb5sdIN74gSnNsM/DvJ6N1zk2H5dt1Vla45v8tWofjbG+01hjUt80wO/dMgRXvL+nOsc
+CHM1Qs/fw9fhkEtMmrBhovMW2Mn+Vel1Zbpcnf50r7KN6CMpOj6DjoSfZ/3o1dG6Erz+da5Pdexk
+L7vZz472tKt97Wxvu9vfDve4y33udK+73e+O97zrfe9877vf/w74wAt+8IQvvOEPj/jEK37xjG+8
+4x8P+chLfvKUr7zlL4/5zGt+85zvvOfx7sNrXfzzpC89gyQB6zqbfvWsL9Bh7xgyNbd+9rT3zxwr
+3aly1n73vAcdMw7rxt4Lf/iE4+LX2rJH4it/+bLNvSI7JXbmS3/61K++9a+P/exrf/vc7773vw/+
+8It//OQvv/nPj/70q3/97G+/+98P//j+y3/+9K+//e+P//zrf//877///w+AASiAA0iABWiAB4iA
+CaiAC8iADeiADwiBtoc4n+Y6FChvFYg6qaOBG/g6HNiBq3OBE7gua1I1FCd1JKhsXkVa4jaCPRRD
+XoOCKUg1MMeCtVQZ0RdVZQVD/+I1dzImWsMT0AKDUmeCR3I3HHOELXdSahMoP/g0n/GCUdKETvgn
+5MMnJ3MYX4VFRQgoUChIboMmybdSIHOFYqhSfQFoJlWDQGOEYjMLs2A5b7iC6kQzaCJ6ayhLX6VN
+JONAgHVUdSiHu2KFPoaHD5QykrZDsYEq3VQSUzQ5qzUyMniDOTiGNoeFGPE8/DZjQjj+XzhIiXfm
+ibymegeFLBqkiZFYM4XoMXqjiqNHiskSikqIKIX2iDA3K9mSJ9QiiZmAiq3YhrIIjCoYjOrFilQo
+dGamibzoMlxoViozBrhIg8yojDOYjM6hi9XoXZcohf/whVaBWYi4LZXQh7WYhNsiil9Gi6eIe4lY
+KsP4Um6yV+04jKVIV7U4ilVIVKkYKzXGUAZHS3QoGbEniRv0j/tYWpmojqT1h+5yTANZaY5Whc8g
+Q8QEJ/AIjlrTi+aIMkn0M7lgKAupPQTTjWiIexfpDBZhhp+4PQ/Zj2TYUNpYh81CkRsJezKYSUt4
+hi6piDBJkuOYkji5ks5nSUA4JZz+uI1KMpPHyBIjeTVqBpKvcYNRmCTRCJBNmYtPaZV22Ip5cHv8
+xpVEWJVQiZRMKZakYZRS+HNkyYRaqJYtaIRS6Y0zGI/zRmlEJoIKFoIeaIF6mYEg6Jcf+JeNlpd/
+Y0qFGTsY2JeCGZiKCZiNuZeO+ZiMCZnnZZikg2CWaVCYiWSaWV6I6XB8mZiRKZmiGYGlaZqniZqp
+qZqryZqt2WuDOZl4uZikKZux+ZmzGZq5WZu2mZmc2ZueeZm+aZfC2V+wyZupZpy0eZu4uZzHuZlE
+OYUK85UlaJA6uJTSuTXU6IvTeJbwpUw9CDluKTZAWZ3N8TZiWZdulZ7UaY9s6Z3+NqidDjmNmFiR
+ntAtKRiI9qknh+GFgoh842iTqvCR7QmWDmmI79mT6hJKCgpVBkpm5RmewQWODRqSP5mTMWmhFLow
+XyOPzdBCC/VfBVmJBqOS5BlfIPomJeqOGvqd40mX71gL53km8RQscdOi6siRCHqiOMqNDGouwCSi
+TUKCSXmUYLSfRzmHYYmeD3mK98meI+qLKgqhUbqWBEqIDpqhUOqS63mOXfqkPJp6SgpgF+RgTnNv
+6Uil8MiOKcpr9AhHzNgsUjpiSZMRXGqidzqCV7c2ERqkVLqicroXdEozb5qQZNSeikimiSiROEGk
+YMhm+FifPTo5v7dPGNkyWTr+pzJ6oQ6ahy76p16KqSy6oYLqp6DqpTB6qqU4oeeIkBjzhDv5iNMZ
+n1NapUlKq/DplOT4P1+6qTwqXbEoqp7lqakao5qKqz66klwqTFQkWJAzV0Z3V31KosT5msmpm7up
+nMH5OcCprdaKrdn6m9yqU5W5reK6meUKms05mteqruwart7aru46rncZr99qr/farelar/mqr+/K
+nPvqr//qmgNLsAVrsAeLsAl7O8ansNP3U9ZjKaHasID0sNxTsc3Dbi86sfxzaPzRsZOUse62sR9y
+Ho8BI+RUp1KhhlMVshc7sgMSG8N0pUGZi8HET2KRYUxGSS37sh60jMuCZgD+Sqgn6U+xtLLTJqIS
+5bInEkD7+LE9qyASQShBCBX3g0j66KHFZbRDS3CkhkfQtLQu9UqGKrJQmyD+s1O1MpciRrYn9opm
+xkrPMkO0VEVqe7QNdFlm2yIFpoxusap1ezO8lTWdFJVu25U3qjKpeDBhWyI1BKx6CyJJJWltyahW
+dCrRgowf9kKH26s3qXrSAkV+BLm086EvKaYNirIZpyqlK2Lsxbmiij5xG7qjKzwh9oxA8k8eCmtf
+m10+pTFXyrgkEry0GyDd5Q2ykbtmtE1DtFN2YUGY2ranyjzDq3ePi05PO3U+IEzF6rsV8byg25mT
+BpJS+0aryqnTe33mC1P+WUVv+iYE6otUMzss4utNpuu6yGlN6auxWWtUMbFGWZW8S6Gza1hiXHJg
+w4lD1Jt38EtBNOW/NMdN+ysqBYwwFDwXB1ycxCsgDGxV/du+7ssdHAyhFtwuJFy/Ioy4GuyxEjwQ
+7OtpMxfCLEwnJvwyNGxTD6qjKkwjLvy++QjBPVy2UmTD0zTETYXCWqrD9MHDMexxuMbEAdxGAZwJ
+sNoCQOGH2MtZjhVZSWdZr7d0W9x00cqseAV2Z7VXz2pZYNx0XRxXSafGXRzGUwjHbwVZcxzHscfG
+39hEWWzHalXH2/saYsWrxYqSMnxxA6xyhoRviTxpyMqkV/Zy9+iPEMf+v+q2cqaGw8BSxEsGaZyR
+jWsWZmdmyM92xLOGyD9cyfdWc7iBN5Dsb678b6ZMyaWVcqjcY6XcbKfMySAGiqO8iUFMaJncaxh8
+rpucboucyoxMXTksybP2ygZnYzIXRrXsxLfsy3Wmy5A8wGH6Wbh8admMaNesusCMS+AMw7RcawUH
+wgm5otzscs8sy+mMzNW8cSjmzeNmzrkcaUr4yYFGzhh0z738z4c80PaLcvK8yo08nu68o84cy/qM
+0Adtyay8rcRcXsY8yW56buKsptPTzwkX0C6Xzx03zy1MzcccngxdcfDcbNE8yyatziSdbSFdzgX9
+yxqdaRxdZIpm0b/+iaY+PcgeJs2UEW3KjKeQGMmPDM2cHNHJbMv1DNKAbMpYLNKJ2kH1I9W5TNWk
+nNWwTHJ9M9SKnNDL7Mgq7YpevdTa/NJuUNRPjXNvbWQKt3NwPdc8nSNhjRdtTc9wqtQOjdZ+PclN
+jc4TrdBy/dV0bdcjp62SZNYEdtdr3RF6jdKH2s6VLYqN/cuCDdOETdYX2G6f7dmGfdg3F9c7gtex
+FdOXvNCWrV6sDZF3KNGqbNT6FNqKDWyiXdqkXdeL/diazdYnDdXsfNmuXWVq7duRDdznPNqJrdvM
+vdu8XdG4DWan3bypTdFlTdzmNm4ufdzTbN2FbdvFLN3OvdzkHd7RF93bJf3b393ZKZ3dSY3Z2AzZ
+3s3ZAhzd551mNv3Ozw3U5lHGpfPfl3NGA351Rmfgj6XHd7xYUKdZCR51rGE2vVJ1E04eAU45Fl7F
+1htMGv5LHN7hXZ3EIS7iI07iJW7iJ47iKa7iK87iLe7iLw7jMS7jM07jNW7jN47jOa7jO87jPe7j
+Pw7kQV68E+EQhqrAQs6aZmirzYzkQC4aAmmIygHlTS7kP0G3gRJ8VB7kAGCRbQB8uqflTu6Ci4jl
+ehjmPs7laf58XB7Fau6DR56aBQAAOw==
diff --git a/Documentation/DocBook/media/vbi_hsync.gif.b64 b/Documentation/DocBook/media/vbi_hsync.gif.b64
new file mode 100644
index 00000000000..cdafabed5c1
--- /dev/null
+++ b/Documentation/DocBook/media/vbi_hsync.gif.b64
@@ -0,0 +1,43 @@
+R0lGODlhBwHJAOcAAAAAAAEBAQICAgMDAwQEBAUFBQYGBgcHBwgICAkJCQoKCgsLCwwMDA0NDQ4O
+Dg8PDxAQEBERERISEhMTExQUFBUVFRYWFhcXFxgYGBkZGRoaGhsbGxwcHB0dHR4eHh8fHyAgICEh
+ISIiIiMjIyQkJCUlJSYmJicnJygoKCkpKSoqKisrKywsLC0tLS4uLi8vLzAwMDExMTIyMjMzMzQ0
+NDU1NTY2Njc3Nzg4ODk5OTo6Ojs7Ozw8PD09PT4+Pj8/P0BAQEFBQUJCQkNDQ0REREVFRUZGRkdH
+R0hISElJSUpKSktLS0xMTE1NTU5OTk9PT1BQUFFRUVJSUlNTU1RUVFVVVVZWVldXV1hYWFlZWVpa
+WltbW1xcXF1dXV5eXl9fX2BgYGFhYWJiYmNjY2RkZGVlZWZmZmdnZ2hoaGlpaWpqamtra2xsbG1t
+bW5ubm9vb3BwcHFxcXJycnNzc3R0dHV1dXZ2dnd3d3h4eHl5eXp6ent7e3x8fH19fX5+fn9/f4CA
+gIGBgYKCgoODg4SEhIWFhYaGhoeHh4iIiImJiYqKiouLi4yMjI2NjY6Ojo+Pj5CQkJGRkZKSkpOT
+k5SUlJWVlZaWlpeXl5iYmJmZmZqampubm5ycnJ2dnZ6enp+fn6CgoKGhoaKioqOjo6SkpKWlpaam
+pqenp6ioqKmpqaqqqqurq6ysrK2tra6urq+vr7CwsLGxsbKysrOzs7S0tLW1tba2tre3t7i4uLm5
+ubq6uru7u7y8vL29vb6+vr+/v8DAwMHBwcLCwsPDw8TExMXFxcbGxsfHx8jIyMnJycrKysvLy8zM
+zM3Nzc7Ozs/Pz9DQ0NHR0dLS0tPT09TU1NXV1dbW1tfX19jY2NnZ2dra2tvb29zc3N3d3d7e3t/f
+3+Dg4OHh4eLi4uPj4+Tk5OXl5ebm5ufn5+jo6Onp6erq6uvr6+zs7O3t7e7u7u/v7/Dw8PHx8fLy
+8vPz8/T09PX19fb29vf39/j4+Pn5+fr6+vv7+/z8/P39/f7+/v///ywAAAAABwHJAAAI/gD/CRxI
+sKDBgwgTKlzIsKHDhxAjSpxIsaLFixgzatzIsaPHjyBDihxJsqTJkyhTqlzJsqXLlzBjypxJs6bN
+mzhz6tzJs6fPn0CDCh1KtKjRo0iTKl3KtKnTp1CjSp1KtarVqyQBYN1aVSvXr1C9gh2rVOxCsV4B
+mE2b0GxDt2TjtnWo9l9du2rrar2bl+BavQL3ApZLeC5du3j77g2MF/FAtIv1AoZb+Gfey5gza97M
+ua/ByJ4XI8b8+PHl0ZkrE6XsuCDr1xD5ip7d2m9pv6IZqxYK+zPC3g/T0mabGLdk4YEH7wYK3PZB
+yqyXSw/++3l139OzS4R+Hbtr7eCp/nv/bp18+PMKuZcfj7792fXm47ufz/52fd308zu/X3u/fv3N
++Sfgf/MFaJ98BLpnIH4IJojegv0d6GB7EEI4oXYVdnfhgxoOyOCG4WXIH4jTidggiSV2KOGHKGa3
+oIUtqvaiijEuNyN8NUp344g5EqYef9H1KNePJwYpJFlEehjhkT7iuCKLTMZl4olRgjWlklV+deWT
+WWpJ45JgdrnVllCKOeaXMJrZFZpfqmkVmWG6SRWcRsoZFZl12hkWmzxemCdXeAr555lOgjnof4de
+tSOVG0KWaFl3GVponH52ZumlmGaq6aaY0pjmhJppmRqQbTaKm6gewgnio2uSOumq/jpO+qmDrE5F
+p6AtSZZeSrf2WOtEoZEmm2C/Astnn6CapKtjbClWZki95lhsbLcRtxmlHkVb47TBWcuYcGvxeiyj
+fp7kGbOJEZscStrGyK1T7bb4blPxojgvU4Hiulu+vto4Lpck3rvUoljCuq+npZp6cKGz0uovwwmX
+u3CRESc7sZINJyhwWbJW7PDFXGZM4MZI1WsvyCF7rDHKZYqMKMuSvmqwS5yOypHJAcP0K8k4z5xr
+RTz/C7DPLO2crdDPEr2S0R31rDDNQB/dMbISQ01R0FOT+/TPV0vtqtZVc21s0wjLLONFJG8XNdkQ
+y5z2UNy+TW3XbN8Ho9xBxa3z/to3lz0i3nljBPhbfG+UZMoqG5db2+KJ9O7gDDHd99dUstpscsgR
+x6CzqC0O0uN70z05xVlHdNpwgvUHGWrFef5RppGHPjawNddue3nB5nYufsKmu/vrhL/3kuRqq1Tr
+6pd/G+6HymGLdvC7Dl+46cYD7aywoSleXGOtj5RnnZALP3vx7Bb2J/iyk6++subTZanz2ZJ2te2R
+st8+9NaFHx/x1Jff5GFz0Z9/+Dc3c9EnSK4ryfLG1z89GaY6AjwQARvnQLfBr24XpFrizGSk+tlv
+aOJbXwULxj3/gTB6DBwhCD2oQLBtkIR66mAEVTe9AqqQhCzMigvNhsIbrnCG/m6ZIAB9+MPqwfCB
+IryhDI14QiQ2kIiUyqH3dqhBHtoJfSZs4gu16CYsGpCKYDyinLz4QS5W8YwcjF0WkxbCJxKRjC0M
+oxnlmCU46tA19BPiCO04xZjM8IBq/GL63hjIMloNitiS4uv+aMUxRk5/ihQXIhMJSUaiUUzgq6RM
+LEmhR5qLk2LsoieVBco5YnKUCiwlG2OIyqyoMoNpPIsm/TjJRMKya698JYZiB7kELq2W6OvlLT8H
+TF62MJfM+R3+lnnIAB5zk8zBHOZks7/BqEuXwXwmLS1DzestDnmNud5MsqlDZPKGWMkzT+9CBc33
+5PGd8IynPOfJwkilLp37/gniN8dZyDgOcienCadudnc6anavnT30p/SKokvH9fOO/+RmqxIK0YUi
+EosBNVz2tnnRR9KzUxyFYjAzqpHehZSQbdxYEBEqUhcVM0WTbGhNZBor+7xNj8SMaT7TJc1Tgcug
+Bf2LNZnlKODp1KYCbR64ujcZ0OBxe5FR3jAfqsSdNiujucMnPnl3uaxiraNI3ep3hro8161uNLbB
+G00fNk3abG+aAiXqcKqlGG8Oy6hgLang+HnUjERyiBFV4VpZitKa5rWEgKJjldgpKs5d9KOQjeym
+XkrSMdnzpYatpWY3y1l6NXGB3RlsZ9eDzp7ydKmnW1dAlTnaQ94zruEkS2tUnfra1iIUdRvlHueu
+iS7N2daic1VncEEz3N/6MbVyNU1TV0tUdL3VuF6aKnQhJdrpWve62M2udrfL3e5697vgDa94x0ve
+8lIkIAA7
diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media_api.tmpl
index 88f2cc680cc..4e8e8985cc1 100644
--- a/Documentation/DocBook/media.tmpl
+++ b/Documentation/DocBook/media_api.tmpl
@@ -8,7 +8,8 @@
 <!ENTITY ie                     "i.&nbsp;e.">
 <!ENTITY fd                     "File descriptor returned by <link linkend='func-open'><function>open()</function></link>.">
 <!ENTITY i2c                    "I<superscript>2</superscript>C">
-<!ENTITY return-value		"<title>Return Value</title><para>On success <returnvalue>0</returnvalue> is returned, on error <returnvalue>-1</returnvalue> and the <varname>errno</varname> variable is set appropriately:</para>">
+<!ENTITY return-value		"<title>Return Value</title><para>On success <returnvalue>0</returnvalue> is returned, on error <returnvalue>-1</returnvalue> and the <varname>errno</varname> variable is set appropriately. The generic error codes are described at the <link linkend='gen-errors'>Generic Error Codes</link> chapter.</para>">
+<!ENTITY return-value-dvb	"<para>RETURN VALUE</para><para>On success <returnvalue>0</returnvalue> is returned, on error <returnvalue>-1</returnvalue> and the <varname>errno</varname> variable is set appropriately. The generic error codes are described at the <link linkend='gen-errors'>Generic Error Codes</link> chapter.</para>">
 <!ENTITY manvol                 "<manvolnum>2</manvolnum>">
 
 <!-- Table templates: structs, structs w/union, defines. -->
@@ -110,6 +111,11 @@ Foundation. A copy of the license is included in the chapter entitled
 &sub-media-controller;
 </part>
 
+<chapter id="gen_errors">
+&sub-gen-errors;
+</chapter>
+
+
 &sub-fdl-appendix;
 
 </book>
diff --git a/Documentation/DocBook/v4l/bayer.pdf b/Documentation/DocBook/v4l/bayer.pdf
deleted file mode 100644
index 905e60e6cd4..00000000000
--- a/Documentation/DocBook/v4l/bayer.pdf
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/bayer.png b/Documentation/DocBook/v4l/bayer.png
deleted file mode 100644
index 9b15fb22e81..00000000000
--- a/Documentation/DocBook/v4l/bayer.png
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/crop.gif b/Documentation/DocBook/v4l/crop.gif
deleted file mode 100644
index 3b9e7d836d4..00000000000
--- a/Documentation/DocBook/v4l/crop.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/dev-event.xml b/Documentation/DocBook/v4l/dev-event.xml
deleted file mode 100644
index be5a98fb4fa..00000000000
--- a/Documentation/DocBook/v4l/dev-event.xml
+++ /dev/null
@@ -1,31 +0,0 @@
-  <title>Event Interface</title>
-
-  <para>The V4L2 event interface provides means for user to get
-  immediately notified on certain conditions taking place on a device.
-  This might include start of frame or loss of signal events, for
-  example.
-  </para>
-
-  <para>To receive events, the events the user is interested in first must
-  be subscribed using the &VIDIOC-SUBSCRIBE-EVENT; ioctl. Once an event is
-  subscribed, the events of subscribed types are dequeueable using the
-  &VIDIOC-DQEVENT; ioctl. Events may be unsubscribed using
-  VIDIOC_UNSUBSCRIBE_EVENT ioctl. The special event type V4L2_EVENT_ALL may
-  be used to unsubscribe all the events the driver supports.</para>
-
-  <para>The event subscriptions and event queues are specific to file
-  handles. Subscribing an event on one file handle does not affect
-  other file handles.
-  </para>
-
-  <para>The information on dequeueable events is obtained by using select or
-  poll system calls on video devices. The V4L2 events use POLLPRI events on
-  poll system call and exceptions on select system call.  </para>
-
-  <!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
-  -->
diff --git a/Documentation/DocBook/v4l/fieldseq_bt.gif b/Documentation/DocBook/v4l/fieldseq_bt.gif
deleted file mode 100644
index 60e8569a76c..00000000000
--- a/Documentation/DocBook/v4l/fieldseq_bt.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/fieldseq_tb.gif b/Documentation/DocBook/v4l/fieldseq_tb.gif
deleted file mode 100644
index 718492f1cfc..00000000000
--- a/Documentation/DocBook/v4l/fieldseq_tb.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/func-ioctl.xml b/Documentation/DocBook/v4l/func-ioctl.xml
deleted file mode 100644
index b60fd37a629..00000000000
--- a/Documentation/DocBook/v4l/func-ioctl.xml
+++ /dev/null
@@ -1,145 +0,0 @@
-<refentry id="func-ioctl">
-  <refmeta>
-    <refentrytitle>V4L2 ioctl()</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>v4l2-ioctl</refname>
-    <refpurpose>Program a V4L2 device</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcsynopsisinfo>#include &lt;sys/ioctl.h&gt;</funcsynopsisinfo>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>void *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>V4L2 ioctl request code as defined in the <filename>videodev2.h</filename> header file, for example
-VIDIOC_QUERYCAP.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para>Pointer to a function parameter, usually a structure.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>The <function>ioctl()</function> function is used to program
-V4L2 devices. The argument <parameter>fd</parameter> must be an open
-file descriptor. An ioctl <parameter>request</parameter> has encoded
-in it whether the argument is an input, output or read/write
-parameter, and the size of the argument <parameter>argp</parameter> in
-bytes. Macros and defines specifying V4L2 ioctl requests are located
-in the <filename>videodev2.h</filename> header file.
-Applications should use their own copy, not include the version in the
-kernel sources on the system they compile on. All V4L2 ioctl requests,
-their respective function and parameters are specified in <xref
-	linkend="user-func" />.</para>
-  </refsect1>
-
-  <refsect1>
-    <title>Return Value</title>
-
-    <para>On success the <function>ioctl()</function> function returns
-<returnvalue>0</returnvalue> and does not reset the
-<varname>errno</varname> variable. On failure
-<returnvalue>-1</returnvalue> is returned, when the ioctl takes an
-output or read/write parameter it remains unmodified, and the
-<varname>errno</varname> variable is set appropriately. See below for
-possible error codes. Generic errors like <errorcode>EBADF</errorcode>
-or <errorcode>EFAULT</errorcode> are not listed in the sections
-discussing individual ioctl requests.</para>
-    <para>Note ioctls may return undefined error codes. Since errors
-may have side effects such as a driver reset applications should
-abort on unexpected errors.</para>
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EBADF</errorcode></term>
-	<listitem>
-	  <para><parameter>fd</parameter> is not a valid open file
-descriptor.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The property cannot be changed right now. Typically
-this error code is returned when I/O is in progress or the driver
-supports multiple opens and another process locked the property.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EFAULT</errorcode></term>
-	<listitem>
-	  <para><parameter>argp</parameter> references an inaccessible
-memory area.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENOTTY</errorcode></term>
-	<listitem>
-	  <para><parameter>fd</parameter> is  not  associated  with  a
-character special device.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The <parameter>request</parameter> or the data pointed
-to by <parameter>argp</parameter> is not valid. This is a very common
-error code, see the individual ioctl requests listed in <xref
-	      linkend="user-func" /> for actual causes.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENOMEM</errorcode></term>
-	<listitem>
-	  <para>Not enough physical or virtual memory was available to
-complete the request.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ERANGE</errorcode></term>
-	<listitem>
-	  <para>The application attempted to set a control with the
-&VIDIOC-S-CTRL; ioctl to a value which is out of bounds.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-</refentry>
-
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/DocBook/v4l/nv12mt.gif b/Documentation/DocBook/v4l/nv12mt.gif
deleted file mode 100644
index ef2d4cf8367..00000000000
--- a/Documentation/DocBook/v4l/nv12mt.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/nv12mt_example.gif b/Documentation/DocBook/v4l/nv12mt_example.gif
deleted file mode 100644
index df81d68108e..00000000000
--- a/Documentation/DocBook/v4l/nv12mt_example.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/pipeline.png b/Documentation/DocBook/v4l/pipeline.png
deleted file mode 100644
index f19b86c2c24..00000000000
--- a/Documentation/DocBook/v4l/pipeline.png
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/vbi_525.gif b/Documentation/DocBook/v4l/vbi_525.gif
deleted file mode 100644
index 5580b690d50..00000000000
--- a/Documentation/DocBook/v4l/vbi_525.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/vbi_625.gif b/Documentation/DocBook/v4l/vbi_625.gif
deleted file mode 100644
index 34e3251983c..00000000000
--- a/Documentation/DocBook/v4l/vbi_625.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/vbi_hsync.gif b/Documentation/DocBook/v4l/vbi_hsync.gif
deleted file mode 100644
index b02434d3b35..00000000000
--- a/Documentation/DocBook/v4l/vbi_hsync.gif
+++ /dev/null
diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml
deleted file mode 100644
index c50536a4f59..00000000000
--- a/Documentation/DocBook/v4l/videodev2.h.xml
+++ /dev/null
@@ -1,1946 +0,0 @@
-<programlisting>
-/*
- *  Video for Linux Two header file
- *
- *  Copyright (C) 1999-2007 the contributors
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  Alternatively you can redistribute this file under the terms of the
- *  BSD license as stated below:
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *  1. Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *  2. Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *  3. The names of its contributors may not be used to endorse or promote
- *     products derived from this software without specific prior written
- *     permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *      Header file for v4l or V4L2 drivers and applications
- * with public API.
- * All kernel-specific stuff were moved to media/v4l2-dev.h, so
- * no #if __KERNEL tests are allowed here
- *
- *      See http://linuxtv.org for more info
- *
- *      Author: Bill Dirks &lt;bill@thedirks.org&gt;
- *              Justin Schoeman
- *              Hans Verkuil &lt;hverkuil@xs4all.nl&gt;
- *              et al.
- */
-#ifndef __LINUX_VIDEODEV2_H
-#define __LINUX_VIDEODEV2_H
-
-#ifdef __KERNEL__
-#include &lt;linux/time.h&gt;     /* need struct timeval */
-#else
-#include &lt;sys/time.h&gt;
-#endif
-#include &lt;linux/compiler.h&gt;
-#include &lt;linux/ioctl.h&gt;
-#include &lt;linux/types.h&gt;
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME               32
-#define VIDEO_MAX_PLANES               8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
-   They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE        1       /* Can capture */
-#define VID_TYPE_TUNER          2       /* Can tune */
-#define VID_TYPE_TELETEXT       4       /* Does teletext */
-#define VID_TYPE_OVERLAY        8       /* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY      16      /* Overlay by chromakey */
-#define VID_TYPE_CLIPPING       32      /* Can clip */
-#define VID_TYPE_FRAMERAM       64      /* Uses the frame buffer memory */
-#define VID_TYPE_SCALES         128     /* Scalable */
-#define VID_TYPE_MONOCHROME     256     /* Monochrome only */
-#define VID_TYPE_SUBCAPTURE     512     /* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER   1024    /* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER   2048    /* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER  4096    /* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER  8192    /* Can encode MJPEG streams */
-#endif
-
-/*
- *      M I S C E L L A N E O U S
- */
-
-/*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
-        ((__u32)(a) | ((__u32)(b) &lt;&lt; 8) | ((__u32)(c) &lt;&lt; 16) | ((__u32)(d) &lt;&lt; 24))
-
-/*
- *      E N U M S
- */
-enum <link linkend="v4l2-field">v4l2_field</link> {
-        V4L2_FIELD_ANY           = 0, /* driver can choose from none,
-                                         top, bottom, interlaced
-                                         depending on whatever it thinks
-                                         is approximate ... */
-        V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
-        V4L2_FIELD_TOP           = 2, /* top field only */
-        V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
-        V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
-        V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
-                                         buffer, top-bottom order */
-        V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
-        V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
-                                         separate buffers */
-        V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
-                                         first and the top field is
-                                         transmitted first */
-        V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
-                                         first and the bottom field is
-                                         transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field)       \
-        ((field) == V4L2_FIELD_TOP      ||\
-         (field) == V4L2_FIELD_INTERLACED ||\
-         (field) == V4L2_FIELD_INTERLACED_TB ||\
-         (field) == V4L2_FIELD_INTERLACED_BT ||\
-         (field) == V4L2_FIELD_SEQ_TB   ||\
-         (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field)    \
-        ((field) == V4L2_FIELD_BOTTOM   ||\
-         (field) == V4L2_FIELD_INTERLACED ||\
-         (field) == V4L2_FIELD_INTERLACED_TB ||\
-         (field) == V4L2_FIELD_INTERLACED_BT ||\
-         (field) == V4L2_FIELD_SEQ_TB   ||\
-         (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field)      \
-        ((field) == V4L2_FIELD_INTERLACED ||\
-         (field) == V4L2_FIELD_INTERLACED_TB ||\
-         (field) == V4L2_FIELD_INTERLACED_BT ||\
-         (field) == V4L2_FIELD_SEQ_TB ||\
-         (field) == V4L2_FIELD_SEQ_BT)
-
-enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> {
-        V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
-        V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
-        V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
-        V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
-        V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
-        V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
-        V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
-#if 1
-        /* Experimental */
-        V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
-        V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
-        V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
-        V4L2_BUF_TYPE_PRIVATE              = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type)                  \
-        ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE   \
-         || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type)                               \
-        ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT                   \
-         || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE         \
-         || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY               \
-         || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY        \
-         || (type) == V4L2_BUF_TYPE_VBI_OUTPUT                  \
-         || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> {
-        V4L2_TUNER_RADIO             = 1,
-        V4L2_TUNER_ANALOG_TV         = 2,
-        V4L2_TUNER_DIGITAL_TV        = 3,
-};
-
-enum <link linkend="v4l2-memory">v4l2_memory</link> {
-        V4L2_MEMORY_MMAP             = 1,
-        V4L2_MEMORY_USERPTR          = 2,
-        V4L2_MEMORY_OVERLAY          = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum <link linkend="v4l2-colorspace">v4l2_colorspace</link> {
-        /* ITU-R 601 -- broadcast NTSC/PAL */
-        V4L2_COLORSPACE_SMPTE170M     = 1,
-
-        /* 1125-Line (US) HDTV */
-        V4L2_COLORSPACE_SMPTE240M     = 2,
-
-        /* HD and modern captures. */
-        V4L2_COLORSPACE_REC709        = 3,
-
-        /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
-        V4L2_COLORSPACE_BT878         = 4,
-
-        /* These should be useful.  Assume 601 extents. */
-        V4L2_COLORSPACE_470_SYSTEM_M  = 5,
-        V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
-        /* I know there will be cameras that send this.  So, this is
-         * unspecified chromaticities and full 0-255 on each of the
-         * Y'CbCr components
-         */
-        V4L2_COLORSPACE_JPEG          = 7,
-
-        /* For RGB colourspaces, this is probably a good start. */
-        V4L2_COLORSPACE_SRGB          = 8,
-};
-
-enum <link linkend="v4l2-priority">v4l2_priority</link> {
-        V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
-        V4L2_PRIORITY_BACKGROUND  = 1,
-        V4L2_PRIORITY_INTERACTIVE = 2,
-        V4L2_PRIORITY_RECORD      = 3,
-        V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct <link linkend="v4l2-rect">v4l2_rect</link> {
-        __s32   left;
-        __s32   top;
-        __s32   width;
-        __s32   height;
-};
-
-struct <link linkend="v4l2-fract">v4l2_fract</link> {
-        __u32   numerator;
-        __u32   denominator;
-};
-
-/*
- *      D R I V E R   C A P A B I L I T I E S
- */
-struct <link linkend="v4l2-capability">v4l2_capability</link> {
-        __u8    driver[16];     /* i.e.ie; "bttv" */
-        __u8    card[32];       /* i.e.ie; "Hauppauge WinTV" */
-        __u8    bus_info[32];   /* "PCI:" + pci_name(pci_dev) */
-        __u32   version;        /* should use KERNEL_VERSION() */
-        __u32   capabilities;   /* Device capabilities */
-        __u32   reserved[4];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE          0x00000001  /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT           0x00000002  /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY          0x00000004  /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE            0x00000010  /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT             0x00000020  /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE     0x00000040  /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT      0x00000080  /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE            0x00000100  /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY   0x00000200  /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK           0x00000400  /* Can do hardware frequency seek  */
-#define V4L2_CAP_RDS_OUTPUT             0x00000800  /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE   0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE    0x00002000
-
-#define V4L2_CAP_TUNER                  0x00010000  /* has a tuner */
-#define V4L2_CAP_AUDIO                  0x00020000  /* has audio support */
-#define V4L2_CAP_RADIO                  0x00040000  /* is a radio device */
-#define V4L2_CAP_MODULATOR              0x00080000  /* has a modulator */
-
-#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
-#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
-
-/*
- *      V I D E O   I M A G E   F O R M A T
- */
-struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
-        __u32                   width;
-        __u32                   height;
-        __u32                   pixelformat;
-        enum <link linkend="v4l2-field">v4l2_field</link>         field;
-        __u32                   bytesperline;   /* for padding, zero if unused */
-        __u32                   sizeimage;
-        enum <link linkend="v4l2-colorspace">v4l2_colorspace</link>    colorspace;
-        __u32                   priv;           /* private data, depends on pixelformat */
-};
-
-/*      Pixel format         FOURCC                          depth  Description  */
-
-/* RGB formats */
-#define <link linkend="V4L2-PIX-FMT-RGB332">V4L2_PIX_FMT_RGB332</link>  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
-#define <link linkend="V4L2-PIX-FMT-RGB444">V4L2_PIX_FMT_RGB444</link>  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
-#define <link linkend="V4L2-PIX-FMT-RGB555">V4L2_PIX_FMT_RGB555</link>  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
-#define <link linkend="V4L2-PIX-FMT-RGB565">V4L2_PIX_FMT_RGB565</link>  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
-#define <link linkend="V4L2-PIX-FMT-RGB555X">V4L2_PIX_FMT_RGB555X</link> v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
-#define <link linkend="V4L2-PIX-FMT-RGB565X">V4L2_PIX_FMT_RGB565X</link> v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
-#define <link linkend="V4L2-PIX-FMT-BGR666">V4L2_PIX_FMT_BGR666</link>  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6     */
-#define <link linkend="V4L2-PIX-FMT-BGR24">V4L2_PIX_FMT_BGR24</link>   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
-#define <link linkend="V4L2-PIX-FMT-RGB24">V4L2_PIX_FMT_RGB24</link>   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
-#define <link linkend="V4L2-PIX-FMT-BGR32">V4L2_PIX_FMT_BGR32</link>   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
-#define <link linkend="V4L2-PIX-FMT-RGB32">V4L2_PIX_FMT_RGB32</link>   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
-
-/* Grey formats */
-#define <link linkend="V4L2-PIX-FMT-GREY">V4L2_PIX_FMT_GREY</link>    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
-#define <link linkend="V4L2-PIX-FMT-Y4">V4L2_PIX_FMT_Y4</link>      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
-#define <link linkend="V4L2-PIX-FMT-Y6">V4L2_PIX_FMT_Y6</link>      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
-#define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link>     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
-#define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link>     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
-
-/* Grey bit-packed formats */
-#define <link linkend="V4L2-PIX-FMT-Y10BPACK">V4L2_PIX_FMT_Y10BPACK</link>    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
-
-/* Palette formats */
-#define <link linkend="V4L2-PIX-FMT-PAL8">V4L2_PIX_FMT_PAL8</link>    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define <link linkend="V4L2-PIX-FMT-YVU410">V4L2_PIX_FMT_YVU410</link>  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
-#define <link linkend="V4L2-PIX-FMT-YVU420">V4L2_PIX_FMT_YVU420</link>  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
-#define <link linkend="V4L2-PIX-FMT-YUYV">V4L2_PIX_FMT_YUYV</link>    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
-#define <link linkend="V4L2-PIX-FMT-YYUV">V4L2_PIX_FMT_YYUV</link>    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
-#define <link linkend="V4L2-PIX-FMT-YVYU">V4L2_PIX_FMT_YVYU</link>    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define <link linkend="V4L2-PIX-FMT-UYVY">V4L2_PIX_FMT_UYVY</link>    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
-#define <link linkend="V4L2-PIX-FMT-VYUY">V4L2_PIX_FMT_VYUY</link>    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
-#define <link linkend="V4L2-PIX-FMT-YUV422P">V4L2_PIX_FMT_YUV422P</link> v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
-#define <link linkend="V4L2-PIX-FMT-YUV411P">V4L2_PIX_FMT_YUV411P</link> v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
-#define <link linkend="V4L2-PIX-FMT-Y41P">V4L2_PIX_FMT_Y41P</link>    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
-#define <link linkend="V4L2-PIX-FMT-YUV444">V4L2_PIX_FMT_YUV444</link>  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
-#define <link linkend="V4L2-PIX-FMT-YUV555">V4L2_PIX_FMT_YUV555</link>  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
-#define <link linkend="V4L2-PIX-FMT-YUV565">V4L2_PIX_FMT_YUV565</link>  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
-#define <link linkend="V4L2-PIX-FMT-YUV32">V4L2_PIX_FMT_YUV32</link>   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
-#define <link linkend="V4L2-PIX-FMT-YUV410">V4L2_PIX_FMT_YUV410</link>  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
-#define <link linkend="V4L2-PIX-FMT-YUV420">V4L2_PIX_FMT_YUV420</link>  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
-#define <link linkend="V4L2-PIX-FMT-HI240">V4L2_PIX_FMT_HI240</link>   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
-#define <link linkend="V4L2-PIX-FMT-HM12">V4L2_PIX_FMT_HM12</link>    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
-#define <link linkend="V4L2-PIX-FMT-M420">V4L2_PIX_FMT_M420</link>    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved  */
-#define <link linkend="V4L2-PIX-FMT-NV12">V4L2_PIX_FMT_NV12</link>    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define <link linkend="V4L2-PIX-FMT-NV21">V4L2_PIX_FMT_NV21</link>    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
-#define <link linkend="V4L2-PIX-FMT-NV16">V4L2_PIX_FMT_NV16</link>    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
-#define <link linkend="V4L2-PIX-FMT-NV61">V4L2_PIX_FMT_NV61</link>    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
-#define <link linkend="V4L2-PIX-FMT-NV12M">V4L2_PIX_FMT_NV12M</link>   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define <link linkend="V4L2-PIX-FMT-NV12MT">V4L2_PIX_FMT_NV12MT</link>  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define <link linkend="V4L2-PIX-FMT-YUV420M">V4L2_PIX_FMT_YUV420M</link> v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define <link linkend="V4L2-PIX-FMT-SBGGR8">V4L2_PIX_FMT_SBGGR8</link>  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
-#define <link linkend="V4L2-PIX-FMT-SGBRG8">V4L2_PIX_FMT_SGBRG8</link>  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
-#define <link linkend="V4L2-PIX-FMT-SGRBG8">V4L2_PIX_FMT_SGRBG8</link>  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
-#define <link linkend="V4L2-PIX-FMT-SRGGB8">V4L2_PIX_FMT_SRGGB8</link>  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
-#define <link linkend="V4L2-PIX-FMT-SBGGR10">V4L2_PIX_FMT_SBGGR10</link> v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
-#define <link linkend="V4L2-PIX-FMT-SGBRG10">V4L2_PIX_FMT_SGBRG10</link> v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
-#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
-#define <link linkend="V4L2-PIX-FMT-SRGGB10">V4L2_PIX_FMT_SRGGB10</link> v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
-        /* 10bit raw bayer DPCM compressed to 8 bits */
-#define <link linkend="V4L2-PIX-FMT-SGRBG10DPCM8">V4L2_PIX_FMT_SGRBG10DPCM8</link> v4l2_fourcc('B', 'D', '1', '0')
-        /*
-         * 10bit raw bayer, expanded to 16 bits
-         * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-         */
-#define <link linkend="V4L2-PIX-FMT-SBGGR16">V4L2_PIX_FMT_SBGGR16</link> v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
-
-/* compressed formats */
-#define <link linkend="V4L2-PIX-FMT-MJPEG">V4L2_PIX_FMT_MJPEG</link>    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
-#define <link linkend="V4L2-PIX-FMT-JPEG">V4L2_PIX_FMT_JPEG</link>     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
-#define <link linkend="V4L2-PIX-FMT-DV">V4L2_PIX_FMT_DV</link>       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
-#define <link linkend="V4L2-PIX-FMT-MPEG">V4L2_PIX_FMT_MPEG</link>     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4    */
-
-/*  Vendor-specific formats   */
-#define <link linkend="V4L2-PIX-FMT-CPIA1">V4L2_PIX_FMT_CPIA1</link>    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define <link linkend="V4L2-PIX-FMT-WNVA">V4L2_PIX_FMT_WNVA</link>     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define <link linkend="V4L2-PIX-FMT-SN9C10X">V4L2_PIX_FMT_SN9C10X</link>  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define <link linkend="V4L2-PIX-FMT-SN9C20X-I420">V4L2_PIX_FMT_SN9C20X_I420</link> v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define <link linkend="V4L2-PIX-FMT-PWC1">V4L2_PIX_FMT_PWC1</link>     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define <link linkend="V4L2-PIX-FMT-PWC2">V4L2_PIX_FMT_PWC2</link>     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define <link linkend="V4L2-PIX-FMT-ET61X251">V4L2_PIX_FMT_ET61X251</link> v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define <link linkend="V4L2-PIX-FMT-SPCA501">V4L2_PIX_FMT_SPCA501</link>  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define <link linkend="V4L2-PIX-FMT-SPCA505">V4L2_PIX_FMT_SPCA505</link>  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define <link linkend="V4L2-PIX-FMT-SPCA508">V4L2_PIX_FMT_SPCA508</link>  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define <link linkend="V4L2-PIX-FMT-SPCA561">V4L2_PIX_FMT_SPCA561</link>  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define <link linkend="V4L2-PIX-FMT-PAC207">V4L2_PIX_FMT_PAC207</link>   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define <link linkend="V4L2-PIX-FMT-MR97310A">V4L2_PIX_FMT_MR97310A</link> v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define <link linkend="V4L2-PIX-FMT-SN9C2028">V4L2_PIX_FMT_SN9C2028</link> v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define <link linkend="V4L2-PIX-FMT-SQ905C">V4L2_PIX_FMT_SQ905C</link>   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define <link linkend="V4L2-PIX-FMT-PJPG">V4L2_PIX_FMT_PJPG</link>     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link>    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link>    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link>  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link>   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define <link linkend="V4L2-PIX-FMT-CIT-YYVYUY">V4L2_PIX_FMT_CIT_YYVYUY</link> v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define <link linkend="V4L2-PIX-FMT-KONICA420">V4L2_PIX_FMT_KONICA420</link>  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-
-/*
- *      F O R M A T   E N U M E R A T I O N
- */
-struct <link linkend="v4l2-fmtdesc">v4l2_fmtdesc</link> {
-        __u32               index;             /* Format number      */
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link>  type;              /* buffer type        */
-        __u32               flags;
-        __u8                description[32];   /* Description string */
-        __u32               pixelformat;       /* Format fourcc      */
-        __u32               reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED   0x0002
-
-#if 1
-        /* Experimental Frame Size and frame rate enumeration */
-/*
- *      F R A M E   S I Z E   E N U M E R A T I O N
- */
-enum <link linkend="v4l2-frmsizetypes">v4l2_frmsizetypes</link> {
-        V4L2_FRMSIZE_TYPE_DISCRETE      = 1,
-        V4L2_FRMSIZE_TYPE_CONTINUOUS    = 2,
-        V4L2_FRMSIZE_TYPE_STEPWISE      = 3,
-};
-
-struct <link linkend="v4l2-frmsize-discrete">v4l2_frmsize_discrete</link> {
-        __u32                   width;          /* Frame width [pixel] */
-        __u32                   height;         /* Frame height [pixel] */
-};
-
-struct <link linkend="v4l2-frmsize-stepwise">v4l2_frmsize_stepwise</link> {
-        __u32                   min_width;      /* Minimum frame width [pixel] */
-        __u32                   max_width;      /* Maximum frame width [pixel] */
-        __u32                   step_width;     /* Frame width step size [pixel] */
-        __u32                   min_height;     /* Minimum frame height [pixel] */
-        __u32                   max_height;     /* Maximum frame height [pixel] */
-        __u32                   step_height;    /* Frame height step size [pixel] */
-};
-
-struct <link linkend="v4l2-frmsizeenum">v4l2_frmsizeenum</link> {
-        __u32                   index;          /* Frame size number */
-        __u32                   pixel_format;   /* Pixel format */
-        __u32                   type;           /* Frame size type the device supports. */
-
-        union {                                 /* Frame size */
-                struct <link linkend="v4l2-frmsize-discrete">v4l2_frmsize_discrete</link>    discrete;
-                struct <link linkend="v4l2-frmsize-stepwise">v4l2_frmsize_stepwise</link>    stepwise;
-        };
-
-        __u32   reserved[2];                    /* Reserved space for future use */
-};
-
-/*
- *      F R A M E   R A T E   E N U M E R A T I O N
- */
-enum <link linkend="v4l2-frmivaltypes">v4l2_frmivaltypes</link> {
-        V4L2_FRMIVAL_TYPE_DISCRETE      = 1,
-        V4L2_FRMIVAL_TYPE_CONTINUOUS    = 2,
-        V4L2_FRMIVAL_TYPE_STEPWISE      = 3,
-};
-
-struct <link linkend="v4l2-frmival-stepwise">v4l2_frmival_stepwise</link> {
-        struct <link linkend="v4l2-fract">v4l2_fract</link>       min;            /* Minimum frame interval [s] */
-        struct <link linkend="v4l2-fract">v4l2_fract</link>       max;            /* Maximum frame interval [s] */
-        struct <link linkend="v4l2-fract">v4l2_fract</link>       step;           /* Frame interval step size [s] */
-};
-
-struct <link linkend="v4l2-frmivalenum">v4l2_frmivalenum</link> {
-        __u32                   index;          /* Frame format index */
-        __u32                   pixel_format;   /* Pixel format */
-        __u32                   width;          /* Frame width */
-        __u32                   height;         /* Frame height */
-        __u32                   type;           /* Frame interval type the device supports. */
-
-        union {                                 /* Frame interval */
-                struct <link linkend="v4l2-fract">v4l2_fract</link>               discrete;
-                struct <link linkend="v4l2-frmival-stepwise">v4l2_frmival_stepwise</link>    stepwise;
-        };
-
-        __u32   reserved[2];                    /* Reserved space for future use */
-};
-#endif
-
-/*
- *      T I M E C O D E
- */
-struct <link linkend="v4l2-timecode">v4l2_timecode</link> {
-        __u32   type;
-        __u32   flags;
-        __u8    frames;
-        __u8    seconds;
-        __u8    minutes;
-        __u8    hours;
-        __u8    userbits[4];
-};
-
-/*  Type  */
-#define V4L2_TC_TYPE_24FPS              1
-#define V4L2_TC_TYPE_25FPS              2
-#define V4L2_TC_TYPE_30FPS              3
-#define V4L2_TC_TYPE_50FPS              4
-#define V4L2_TC_TYPE_60FPS              5
-
-/*  Flags  */
-#define V4L2_TC_FLAG_DROPFRAME          0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME         0x0002
-#define V4L2_TC_USERBITS_field          0x000C
-#define V4L2_TC_USERBITS_USERDEFINED    0x0000
-#define V4L2_TC_USERBITS_8BITCHARS      0x0008
-/* The above is based on SMPTE timecodes */
-
-struct <link linkend="v4l2-jpegcompression">v4l2_jpegcompression</link> {
-        int quality;
-
-        int  APPn;              /* Number of APP segment to be written,
-                                 * must be 0..15 */
-        int  APP_len;           /* Length of data in JPEG APPn segment */
-        char APP_data[60];      /* Data in the JPEG APPn segment. */
-
-        int  COM_len;           /* Length of data in JPEG COM segment */
-        char COM_data[60];      /* Data in JPEG COM segment */
-
-        __u32 jpeg_markers;     /* Which markers should go into the JPEG
-                                 * output. Unless you exactly know what
-                                 * you do, leave them untouched.
-                                 * Inluding less markers will make the
-                                 * resulting code smaller, but there will
-                                 * be fewer applications which can read it.
-                                 * The presence of the APP and COM marker
-                                 * is influenced by APP_len and COM_len
-                                 * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1&lt;&lt;3)    /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1&lt;&lt;4)    /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1&lt;&lt;5)    /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1&lt;&lt;6)    /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1&lt;&lt;7)    /* App segment, driver will
-                                        * allways use APP0 */
-};
-
-/*
- *      M E M O R Y - M A P P I N G   B U F F E R S
- */
-struct <link linkend="v4l2-requestbuffers">v4l2_requestbuffers</link> {
-        __u32                   count;
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link>      type;
-        enum <link linkend="v4l2-memory">v4l2_memory</link>        memory;
-        __u32                   reserved[2];
-};
-
-/**
- * struct <link linkend="v4l2-plane">v4l2_plane</link> - plane info for multi-planar buffers
- * @bytesused:          number of bytes occupied by data in the plane (payload)
- * @length:             size of this plane (NOT the payload) in bytes
- * @mem_offset:         when memory in the associated struct <link linkend="v4l2-buffer">v4l2_buffer</link> is
- *                      V4L2_MEMORY_MMAP, equals the offset from the start of
- *                      the device memory for this plane (or is a "cookie" that
- *                      should be passed to mmap() called on the video node)
- * @userptr:            when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- *                      pointing to this plane
- * @data_offset:        offset in the plane to the start of data; usually 0,
- *                      unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct <link linkend="v4l2-plane">v4l2_plane</link> {
-        __u32                   bytesused;
-        __u32                   length;
-        union {
-                __u32           mem_offset;
-                unsigned long   userptr;
-        } m;
-        __u32                   data_offset;
-        __u32                   reserved[11];
-};
-
-/**
- * struct <link linkend="v4l2-buffer">v4l2_buffer</link> - video buffer info
- * @index:      id number of the buffer
- * @type:       buffer type (type == *_MPLANE for multiplanar buffers)
- * @bytesused:  number of bytes occupied by data in the buffer (payload);
- *              unused (set to 0) for multiplanar buffers
- * @flags:      buffer informational flags
- * @field:      field order of the image in the buffer
- * @timestamp:  frame timestamp
- * @timecode:   frame timecode
- * @sequence:   sequence count of this frame
- * @memory:     the method, in which the actual video data is passed
- * @offset:     for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- *              offset from the start of the device memory for this plane,
- *              (or a "cookie" that should be passed to mmap() as offset)
- * @userptr:    for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- *              a userspace pointer pointing to this buffer
- * @planes:     for multiplanar buffers; userspace pointer to the array of plane
- *              info structs for this buffer
- * @length:     size in bytes of the buffer (NOT its payload) for single-plane
- *              buffers (when type != *_MPLANE); number of elements in the
- *              planes array for multi-plane buffers
- * @input:      input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct <link linkend="v4l2-buffer">v4l2_buffer</link> {
-        __u32                   index;
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link>      type;
-        __u32                   bytesused;
-        __u32                   flags;
-        enum <link linkend="v4l2-field">v4l2_field</link>         field;
-        struct timeval          timestamp;
-        struct <link linkend="v4l2-timecode">v4l2_timecode</link>    timecode;
-        __u32                   sequence;
-
-        /* memory location */
-        enum <link linkend="v4l2-memory">v4l2_memory</link>        memory;
-        union {
-                __u32           offset;
-                unsigned long   userptr;
-                struct <link linkend="v4l2-plane">v4l2_plane</link> *planes;
-        } m;
-        __u32                   length;
-        __u32                   input;
-        __u32                   reserved;
-};
-
-/*  Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED    0x0001  /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED    0x0002  /* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE      0x0004  /* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME  0x0008  /* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME    0x0010  /* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME    0x0020  /* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR     0x0040
-#define V4L2_BUF_FLAG_TIMECODE  0x0100  /* timecode field is valid */
-#define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */
-
-/*
- *      O V E R L A Y   P R E V I E W
- */
-struct <link linkend="v4l2-framebuffer">v4l2_framebuffer</link> {
-        __u32                   capability;
-        __u32                   flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
-        void                    *base;
-        struct <link linkend="v4l2-pix-format">v4l2_pix_format</link>  fmt;
-};
-/*  Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY     0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY         0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING   0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA       0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA      0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA   0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY     0x0080
-/*  Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY          0x0001
-#define V4L2_FBUF_FLAG_OVERLAY          0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY        0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA      0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA     0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA  0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY    0x0040
-
-struct <link linkend="v4l2-clip">v4l2_clip</link> {
-        struct <link linkend="v4l2-rect">v4l2_rect</link>        c;
-        struct <link linkend="v4l2-clip">v4l2_clip</link>        __user *next;
-};
-
-struct <link linkend="v4l2-window">v4l2_window</link> {
-        struct <link linkend="v4l2-rect">v4l2_rect</link>        w;
-        enum <link linkend="v4l2-field">v4l2_field</link>         field;
-        __u32                   chromakey;
-        struct <link linkend="v4l2-clip">v4l2_clip</link>        __user *clips;
-        __u32                   clipcount;
-        void                    __user *bitmap;
-        __u8                    global_alpha;
-};
-
-/*
- *      C A P T U R E   P A R A M E T E R S
- */
-struct <link linkend="v4l2-captureparm">v4l2_captureparm</link> {
-        __u32              capability;    /*  Supported modes */
-        __u32              capturemode;   /*  Current mode */
-        struct <link linkend="v4l2-fract">v4l2_fract</link>  timeperframe;  /*  Time per frame in .1us units */
-        __u32              extendedmode;  /*  Driver-specific extensions */
-        __u32              readbuffers;   /*  # of buffers for read */
-        __u32              reserved[4];
-};
-
-/*  Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY   0x0001  /*  High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME   0x1000  /*  timeperframe field is supported */
-
-struct <link linkend="v4l2-outputparm">v4l2_outputparm</link> {
-        __u32              capability;   /*  Supported modes */
-        __u32              outputmode;   /*  Current mode */
-        struct <link linkend="v4l2-fract">v4l2_fract</link>  timeperframe; /*  Time per frame in seconds */
-        __u32              extendedmode; /*  Driver-specific extensions */
-        __u32              writebuffers; /*  # of buffers for write */
-        __u32              reserved[4];
-};
-
-/*
- *      I N P U T   I M A G E   C R O P P I N G
- */
-struct <link linkend="v4l2-cropcap">v4l2_cropcap</link> {
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link>      type;
-        struct <link linkend="v4l2-rect">v4l2_rect</link>        bounds;
-        struct <link linkend="v4l2-rect">v4l2_rect</link>        defrect;
-        struct <link linkend="v4l2-fract">v4l2_fract</link>       pixelaspect;
-};
-
-struct <link linkend="v4l2-crop">v4l2_crop</link> {
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link>      type;
-        struct <link linkend="v4l2-rect">v4l2_rect</link>        c;
-};
-
-/*
- *      A N A L O G   V I D E O   S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)
-#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)
-#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)
-
-#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
-
-/* FIXME:
-   Although std_id is 64 bits, there is an issue on PPC32 architecture that
-   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
-   this value to 32 bits.
-   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
-   it should work fine. However, if needed to add more than two standards,
-   v4l2-common.c should be fixed.
- */
-
-/* some merged standards */
-#define V4L2_STD_MN     (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC)
-#define V4L2_STD_B      (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B)
-#define V4L2_STD_GH     (V4L2_STD_PAL_G|V4L2_STD_PAL_H|V4L2_STD_SECAM_G|V4L2_STD_SECAM_H)
-#define V4L2_STD_DK     (V4L2_STD_PAL_DK|V4L2_STD_SECAM_DK)
-
-/* some common needed stuff */
-#define V4L2_STD_PAL_BG         (V4L2_STD_PAL_B         |\
-                                 V4L2_STD_PAL_B1        |\
-                                 V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK         (V4L2_STD_PAL_D         |\
-                                 V4L2_STD_PAL_D1        |\
-                                 V4L2_STD_PAL_K)
-#define V4L2_STD_PAL            (V4L2_STD_PAL_BG        |\
-                                 V4L2_STD_PAL_DK        |\
-                                 V4L2_STD_PAL_H         |\
-                                 V4L2_STD_PAL_I)
-#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M        |\
-                                 V4L2_STD_NTSC_M_JP     |\
-                                 V4L2_STD_NTSC_M_KR)
-#define V4L2_STD_SECAM_DK       (V4L2_STD_SECAM_D       |\
-                                 V4L2_STD_SECAM_K       |\
-                                 V4L2_STD_SECAM_K1)
-#define V4L2_STD_SECAM          (V4L2_STD_SECAM_B       |\
-                                 V4L2_STD_SECAM_G       |\
-                                 V4L2_STD_SECAM_H       |\
-                                 V4L2_STD_SECAM_DK      |\
-                                 V4L2_STD_SECAM_L       |\
-                                 V4L2_STD_SECAM_LC)
-
-#define V4L2_STD_525_60         (V4L2_STD_PAL_M         |\
-                                 V4L2_STD_PAL_60        |\
-                                 V4L2_STD_NTSC          |\
-                                 V4L2_STD_NTSC_443)
-#define V4L2_STD_625_50         (V4L2_STD_PAL           |\
-                                 V4L2_STD_PAL_N         |\
-                                 V4L2_STD_PAL_Nc        |\
-                                 V4L2_STD_SECAM)
-#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
-                                 V4L2_STD_ATSC_16_VSB)
-
-#define V4L2_STD_UNKNOWN        0
-#define V4L2_STD_ALL            (V4L2_STD_525_60        |\
-                                 V4L2_STD_625_50)
-
-struct <link linkend="v4l2-standard">v4l2_standard</link> {
-        __u32                index;
-        v4l2_std_id          id;
-        __u8                 name[24];
-        struct <link linkend="v4l2-fract">v4l2_fract</link>    frameperiod; /* Frames, not fields */
-        __u32                framelines;
-        __u32                reserved[4];
-};
-
-/*
- *      V I D E O       T I M I N G S   D V     P R E S E T
- */
-struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link> {
-        __u32   preset;
-        __u32   reserved[4];
-};
-
-/*
- *      D V     P R E S E T S   E N U M E R A T I O N
- */
-struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link> {
-        __u32   index;
-        __u32   preset;
-        __u8    name[32]; /* Name of the preset timing */
-        __u32   width;
-        __u32   height;
-        __u32   reserved[4];
-};
-
-/*
- *      D V     P R E S E T     V A L U E S
- */
-#define         V4L2_DV_INVALID         0
-#define         V4L2_DV_480P59_94       1 /* BT.1362 */
-#define         V4L2_DV_576P50          2 /* BT.1362 */
-#define         V4L2_DV_720P24          3 /* SMPTE 296M */
-#define         V4L2_DV_720P25          4 /* SMPTE 296M */
-#define         V4L2_DV_720P30          5 /* SMPTE 296M */
-#define         V4L2_DV_720P50          6 /* SMPTE 296M */
-#define         V4L2_DV_720P59_94       7 /* SMPTE 274M */
-#define         V4L2_DV_720P60          8 /* SMPTE 274M/296M */
-#define         V4L2_DV_1080I29_97      9 /* BT.1120/ SMPTE 274M */
-#define         V4L2_DV_1080I30         10 /* BT.1120/ SMPTE 274M */
-#define         V4L2_DV_1080I25         11 /* BT.1120 */
-#define         V4L2_DV_1080I50         12 /* SMPTE 296M */
-#define         V4L2_DV_1080I60         13 /* SMPTE 296M */
-#define         V4L2_DV_1080P24         14 /* SMPTE 296M */
-#define         V4L2_DV_1080P25         15 /* SMPTE 296M */
-#define         V4L2_DV_1080P30         16 /* SMPTE 296M */
-#define         V4L2_DV_1080P50         17 /* BT.1120 */
-#define         V4L2_DV_1080P60         18 /* BT.1120 */
-
-/*
- *      D V     B T     T I M I N G S
- */
-
-/* BT.656/BT.1120 timing data */
-struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link> {
-        __u32   width;          /* width in pixels */
-        __u32   height;         /* height in lines */
-        __u32   interlaced;     /* Interlaced or progressive */
-        __u32   polarities;     /* Positive or negative polarity */
-        __u64   pixelclock;     /* Pixel clock in HZ. Ex. 74.25MHz-&gt;74250000 */
-        __u32   hfrontporch;    /* Horizpontal front porch in pixels */
-        __u32   hsync;          /* Horizontal Sync length in pixels */
-        __u32   hbackporch;     /* Horizontal back porch in pixels */
-        __u32   vfrontporch;    /* Vertical front porch in pixels */
-        __u32   vsync;          /* Vertical Sync length in lines */
-        __u32   vbackporch;     /* Vertical back porch in lines */
-        __u32   il_vfrontporch; /* Vertical front porch for bottom field of
-                                 * interlaced field formats
-                                 */
-        __u32   il_vsync;       /* Vertical sync length for bottom field of
-                                 * interlaced field formats
-                                 */
-        __u32   il_vbackporch;  /* Vertical back porch for bottom field of
-                                 * interlaced field formats
-                                 */
-        __u32   reserved[16];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define V4L2_DV_PROGRESSIVE     0
-#define V4L2_DV_INTERLACED      1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL   0x00000001
-#define V4L2_DV_HSYNC_POS_POL   0x00000002
-
-
-/* DV timings */
-struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link> {
-        __u32 type;
-        union {
-                struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link>  bt;
-                __u32   reserved[32];
-        };
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120     0       /* BT.656/1120 timing type */
-
-/*
- *      V I D E O   I N P U T S
- */
-struct <link linkend="v4l2-input">v4l2_input</link> {
-        __u32        index;             /*  Which input */
-        __u8         name[32];          /*  Label */
-        __u32        type;              /*  Type of input */
-        __u32        audioset;          /*  Associated audios (bitfield) */
-        __u32        tuner;             /*  Associated tuner */
-        v4l2_std_id  std;
-        __u32        status;
-        __u32        capabilities;
-        __u32        reserved[3];
-};
-
-/*  Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER           1
-#define V4L2_INPUT_TYPE_CAMERA          2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL   0x00000002
-#define V4L2_IN_ST_NO_COLOR    0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
-#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS             0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS      0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_STD                 0x00000004 /* Supports S_STD */
-
-/*
- *      V I D E O   O U T P U T S
- */
-struct <link linkend="v4l2-output">v4l2_output</link> {
-        __u32        index;             /*  Which output */
-        __u8         name[32];          /*  Label */
-        __u32        type;              /*  Type of output */
-        __u32        audioset;          /*  Associated audios (bitfield) */
-        __u32        modulator;         /*  Associated modulator */
-        v4l2_std_id  std;
-        __u32        capabilities;
-        __u32        reserved[3];
-};
-/*  Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR              1
-#define V4L2_OUTPUT_TYPE_ANALOG                 2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY       3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS            0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS     0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_STD                0x00000004 /* Supports S_STD */
-
-/*
- *      C O N T R O L S
- */
-struct <link linkend="v4l2-control">v4l2_control</link> {
-        __u32                id;
-        __s32                value;
-};
-
-struct <link linkend="v4l2-ext-control">v4l2_ext_control</link> {
-        __u32 id;
-        __u32 size;
-        __u32 reserved2[1];
-        union {
-                __s32 value;
-                __s64 value64;
-                char *string;
-        };
-} __attribute__ ((packed));
-
-struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link> {
-        __u32 ctrl_class;
-        __u32 count;
-        __u32 error_idx;
-        __u32 reserved[2];
-        struct <link linkend="v4l2-ext-control">v4l2_ext_control</link> *controls;
-};
-
-/*  Values for ctrl_class field */
-#define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */
-#define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */
-#define V4L2_CTRL_CLASS_CAMERA 0x009a0000       /* Camera class controls */
-#define V4L2_CTRL_CLASS_FM_TX 0x009b0000        /* FM Modulator control class */
-
-#define V4L2_CTRL_ID_MASK         (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id)    ((id) &amp; 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) &amp; 0xffff) &gt;= 0x1000)
-
-enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> {
-        V4L2_CTRL_TYPE_INTEGER       = 1,
-        V4L2_CTRL_TYPE_BOOLEAN       = 2,
-        V4L2_CTRL_TYPE_MENU          = 3,
-        V4L2_CTRL_TYPE_BUTTON        = 4,
-        V4L2_CTRL_TYPE_INTEGER64     = 5,
-        V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
-        V4L2_CTRL_TYPE_STRING        = 7,
-};
-
-/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct <link linkend="v4l2-queryctrl">v4l2_queryctrl</link> {
-        __u32                id;
-        enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link>  type;
-        __u8                 name[32];  /* Whatever */
-        __s32                minimum;   /* Note signedness */
-        __s32                maximum;
-        __s32                step;
-        __s32                default_value;
-        __u32                flags;
-        __u32                reserved[2];
-};
-
-/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct <link linkend="v4l2-querymenu">v4l2_querymenu</link> {
-        __u32           id;
-        __u32           index;
-        __u8            name[32];       /* Whatever */
-        __u32           reserved;
-};
-
-/*  Control flags  */
-#define V4L2_CTRL_FLAG_DISABLED         0x0001
-#define V4L2_CTRL_FLAG_GRABBED          0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY        0x0004
-#define V4L2_CTRL_FLAG_UPDATE           0x0008
-#define V4L2_CTRL_FLAG_INACTIVE         0x0010
-#define V4L2_CTRL_FLAG_SLIDER           0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY       0x0040
-
-/*  Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL        0x80000000
-
-/*  User-class control IDs defined by V4L2 */
-#define V4L2_CID_BASE                   (V4L2_CTRL_CLASS_USER | 0x900)
-#define V4L2_CID_USER_BASE              V4L2_CID_BASE
-/*  IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE           0x08000000
-
-#define V4L2_CID_USER_CLASS             (V4L2_CTRL_CLASS_USER | 1)
-#define V4L2_CID_BRIGHTNESS             (V4L2_CID_BASE+0)
-#define V4L2_CID_CONTRAST               (V4L2_CID_BASE+1)
-#define V4L2_CID_SATURATION             (V4L2_CID_BASE+2)
-#define V4L2_CID_HUE                    (V4L2_CID_BASE+3)
-#define V4L2_CID_AUDIO_VOLUME           (V4L2_CID_BASE+5)
-#define V4L2_CID_AUDIO_BALANCE          (V4L2_CID_BASE+6)
-#define V4L2_CID_AUDIO_BASS             (V4L2_CID_BASE+7)
-#define V4L2_CID_AUDIO_TREBLE           (V4L2_CID_BASE+8)
-#define V4L2_CID_AUDIO_MUTE             (V4L2_CID_BASE+9)
-#define V4L2_CID_AUDIO_LOUDNESS         (V4L2_CID_BASE+10)
-#define V4L2_CID_BLACK_LEVEL            (V4L2_CID_BASE+11) /* Deprecated */
-#define V4L2_CID_AUTO_WHITE_BALANCE     (V4L2_CID_BASE+12)
-#define V4L2_CID_DO_WHITE_BALANCE       (V4L2_CID_BASE+13)
-#define V4L2_CID_RED_BALANCE            (V4L2_CID_BASE+14)
-#define V4L2_CID_BLUE_BALANCE           (V4L2_CID_BASE+15)
-#define V4L2_CID_GAMMA                  (V4L2_CID_BASE+16)
-#define V4L2_CID_WHITENESS              (V4L2_CID_GAMMA) /* Deprecated */
-#define V4L2_CID_EXPOSURE               (V4L2_CID_BASE+17)
-#define V4L2_CID_AUTOGAIN               (V4L2_CID_BASE+18)
-#define V4L2_CID_GAIN                   (V4L2_CID_BASE+19)
-#define V4L2_CID_HFLIP                  (V4L2_CID_BASE+20)
-#define V4L2_CID_VFLIP                  (V4L2_CID_BASE+21)
-
-/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER                (V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER                (V4L2_CID_BASE+23)
-
-#define V4L2_CID_POWER_LINE_FREQUENCY   (V4L2_CID_BASE+24)
-enum <link linkend="v4l2-power-line-frequency">v4l2_power_line_frequency</link> {
-        V4L2_CID_POWER_LINE_FREQUENCY_DISABLED  = 0,
-        V4L2_CID_POWER_LINE_FREQUENCY_50HZ      = 1,
-        V4L2_CID_POWER_LINE_FREQUENCY_60HZ      = 2,
-};
-#define V4L2_CID_HUE_AUTO                       (V4L2_CID_BASE+25)
-#define V4L2_CID_WHITE_BALANCE_TEMPERATURE      (V4L2_CID_BASE+26)
-#define V4L2_CID_SHARPNESS                      (V4L2_CID_BASE+27)
-#define V4L2_CID_BACKLIGHT_COMPENSATION         (V4L2_CID_BASE+28)
-#define V4L2_CID_CHROMA_AGC                     (V4L2_CID_BASE+29)
-#define V4L2_CID_COLOR_KILLER                   (V4L2_CID_BASE+30)
-#define V4L2_CID_COLORFX                        (V4L2_CID_BASE+31)
-enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> {
-        V4L2_COLORFX_NONE       = 0,
-        V4L2_COLORFX_BW         = 1,
-        V4L2_COLORFX_SEPIA      = 2,
-        V4L2_COLORFX_NEGATIVE = 3,
-        V4L2_COLORFX_EMBOSS = 4,
-        V4L2_COLORFX_SKETCH = 5,
-        V4L2_COLORFX_SKY_BLUE = 6,
-        V4L2_COLORFX_GRASS_GREEN = 7,
-        V4L2_COLORFX_SKIN_WHITEN = 8,
-        V4L2_COLORFX_VIVID = 9,
-};
-#define V4L2_CID_AUTOBRIGHTNESS                 (V4L2_CID_BASE+32)
-#define V4L2_CID_BAND_STOP_FILTER               (V4L2_CID_BASE+33)
-
-#define V4L2_CID_ROTATE                         (V4L2_CID_BASE+34)
-#define V4L2_CID_BG_COLOR                       (V4L2_CID_BASE+35)
-
-#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
-
-#define V4L2_CID_ILLUMINATORS_1                 (V4L2_CID_BASE+37)
-#define V4L2_CID_ILLUMINATORS_2                 (V4L2_CID_BASE+38)
-
-/* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+39)
-
-/*  MPEG-class control IDs defined by V4L2 */
-#define V4L2_CID_MPEG_BASE                      (V4L2_CTRL_CLASS_MPEG | 0x900)
-#define V4L2_CID_MPEG_CLASS                     (V4L2_CTRL_CLASS_MPEG | 1)
-
-/*  MPEG streams */
-#define V4L2_CID_MPEG_STREAM_TYPE               (V4L2_CID_MPEG_BASE+0)
-enum <link linkend="v4l2-mpeg-stream-type">v4l2_mpeg_stream_type</link> {
-        V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
-        V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
-        V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
-        V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
-        V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
-        V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
-};
-#define V4L2_CID_MPEG_STREAM_PID_PMT            (V4L2_CID_MPEG_BASE+1)
-#define V4L2_CID_MPEG_STREAM_PID_AUDIO          (V4L2_CID_MPEG_BASE+2)
-#define V4L2_CID_MPEG_STREAM_PID_VIDEO          (V4L2_CID_MPEG_BASE+3)
-#define V4L2_CID_MPEG_STREAM_PID_PCR            (V4L2_CID_MPEG_BASE+4)
-#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO       (V4L2_CID_MPEG_BASE+5)
-#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO       (V4L2_CID_MPEG_BASE+6)
-#define V4L2_CID_MPEG_STREAM_VBI_FMT            (V4L2_CID_MPEG_BASE+7)
-enum <link linkend="v4l2-mpeg-stream-vbi-fmt">v4l2_mpeg_stream_vbi_fmt</link> {
-        V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
-        V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
-};
-
-/*  MPEG audio */
-#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ       (V4L2_CID_MPEG_BASE+100)
-enum <link linkend="v4l2-mpeg-audio-sampling-freq">v4l2_mpeg_audio_sampling_freq</link> {
-        V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
-        V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
-        V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_ENCODING            (V4L2_CID_MPEG_BASE+101)
-enum <link linkend="v4l2-mpeg-audio-encoding">v4l2_mpeg_audio_encoding</link> {
-        V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
-        V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
-        V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
-        V4L2_MPEG_AUDIO_ENCODING_AAC     = 3,
-        V4L2_MPEG_AUDIO_ENCODING_AC3     = 4,
-};
-#define V4L2_CID_MPEG_AUDIO_L1_BITRATE          (V4L2_CID_MPEG_BASE+102)
-enum <link linkend="v4l2-mpeg-audio-l1-bitrate">v4l2_mpeg_audio_l1_bitrate</link> {
-        V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
-        V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
-        V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
-        V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
-        V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
-        V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
-        V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
-        V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
-        V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
-        V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
-        V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
-        V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
-        V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
-        V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L2_BITRATE          (V4L2_CID_MPEG_BASE+103)
-enum <link linkend="v4l2-mpeg-audio-l2-bitrate">v4l2_mpeg_audio_l2_bitrate</link> {
-        V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
-        V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
-        V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
-        V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
-        V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
-        V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
-        V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
-        V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
-        V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
-        V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
-        V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
-        V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
-        V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
-        V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L3_BITRATE          (V4L2_CID_MPEG_BASE+104)
-enum <link linkend="v4l2-mpeg-audio-l3-bitrate">v4l2_mpeg_audio_l3_bitrate</link> {
-        V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
-        V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
-        V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
-        V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
-        V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
-        V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
-        V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
-        V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
-        V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
-        V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
-        V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
-        V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
-        V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
-        V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE                (V4L2_CID_MPEG_BASE+105)
-enum <link linkend="v4l2-mpeg-audio-mode">v4l2_mpeg_audio_mode</link> {
-        V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
-        V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
-        V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
-        V4L2_MPEG_AUDIO_MODE_MONO         = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION      (V4L2_CID_MPEG_BASE+106)
-enum <link linkend="v4l2-mpeg-audio-mode-extension">v4l2_mpeg_audio_mode_extension</link> {
-        V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
-        V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
-        V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
-        V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_EMPHASIS            (V4L2_CID_MPEG_BASE+107)
-enum <link linkend="v4l2-mpeg-audio-emphasis">v4l2_mpeg_audio_emphasis</link> {
-        V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
-        V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
-        V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_CRC                 (V4L2_CID_MPEG_BASE+108)
-enum <link linkend="v4l2-mpeg-audio-crc">v4l2_mpeg_audio_crc</link> {
-        V4L2_MPEG_AUDIO_CRC_NONE  = 0,
-        V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
-};
-#define V4L2_CID_MPEG_AUDIO_MUTE                (V4L2_CID_MPEG_BASE+109)
-#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE         (V4L2_CID_MPEG_BASE+110)
-#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE         (V4L2_CID_MPEG_BASE+111)
-enum <link linkend="v4l2-mpeg-audio-ac3-bitrate">v4l2_mpeg_audio_ac3_bitrate</link> {
-        V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_48K  = 2,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_56K  = 3,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_64K  = 4,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_80K  = 5,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_96K  = 6,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
-        V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
-};
-
-/*  MPEG video */
-#define V4L2_CID_MPEG_VIDEO_ENCODING            (V4L2_CID_MPEG_BASE+200)
-enum <link linkend="v4l2-mpeg-video-encoding">v4l2_mpeg_video_encoding</link> {
-        V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
-        V4L2_MPEG_VIDEO_ENCODING_MPEG_2     = 1,
-        V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
-};
-#define V4L2_CID_MPEG_VIDEO_ASPECT              (V4L2_CID_MPEG_BASE+201)
-enum <link linkend="v4l2-mpeg-video-aspect">v4l2_mpeg_video_aspect</link> {
-        V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
-        V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
-        V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
-        V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
-};
-#define V4L2_CID_MPEG_VIDEO_B_FRAMES            (V4L2_CID_MPEG_BASE+202)
-#define V4L2_CID_MPEG_VIDEO_GOP_SIZE            (V4L2_CID_MPEG_BASE+203)
-#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE         (V4L2_CID_MPEG_BASE+204)
-#define V4L2_CID_MPEG_VIDEO_PULLDOWN            (V4L2_CID_MPEG_BASE+205)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE        (V4L2_CID_MPEG_BASE+206)
-enum <link linkend="v4l2-mpeg-video-bitrate-mode">v4l2_mpeg_video_bitrate_mode</link> {
-        V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
-        V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_BITRATE             (V4L2_CID_MPEG_BASE+207)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK        (V4L2_CID_MPEG_BASE+208)
-#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
-#define V4L2_CID_MPEG_VIDEO_MUTE                (V4L2_CID_MPEG_BASE+210)
-#define V4L2_CID_MPEG_VIDEO_MUTE_YUV            (V4L2_CID_MPEG_BASE+211)
-
-/*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
-#define V4L2_CID_MPEG_CX2341X_BASE                              (V4L2_CTRL_CLASS_MPEG | 0x1000)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE         (V4L2_CID_MPEG_CX2341X_BASE+0)
-enum <link linkend="v4l2-mpeg-cx2341x-video-spatial-filter-mode">v4l2_mpeg_cx2341x_video_spatial_filter_mode</link> {
-        V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
-        V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER              (V4L2_CID_MPEG_CX2341X_BASE+1)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE    (V4L2_CID_MPEG_CX2341X_BASE+2)
-enum <link linkend="luma-spatial-filter-type">v4l2_mpeg_cx2341x_video_luma_spatial_filter_type</link> {
-        V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
-        V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
-        V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
-        V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
-        V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE  (V4L2_CID_MPEG_CX2341X_BASE+3)
-enum <link linkend="chroma-spatial-filter-type">v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type</link> {
-        V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
-        V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE        (V4L2_CID_MPEG_CX2341X_BASE+4)
-enum <link linkend="v4l2-mpeg-cx2341x-video-temporal-filter-mode">v4l2_mpeg_cx2341x_video_temporal_filter_mode</link> {
-        V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
-        V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER             (V4L2_CID_MPEG_CX2341X_BASE+5)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE          (V4L2_CID_MPEG_CX2341X_BASE+6)
-enum <link linkend="v4l2-mpeg-cx2341x-video-median-filter-type">v4l2_mpeg_cx2341x_video_median_filter_type</link> {
-        V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
-        V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
-        V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
-        V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
-        V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM   (V4L2_CID_MPEG_CX2341X_BASE+7)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP      (V4L2_CID_MPEG_CX2341X_BASE+8)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+9)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP    (V4L2_CID_MPEG_CX2341X_BASE+10)
-#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS         (V4L2_CID_MPEG_CX2341X_BASE+11)
-
-/*  Camera class control IDs */
-#define V4L2_CID_CAMERA_CLASS_BASE      (V4L2_CTRL_CLASS_CAMERA | 0x900)
-#define V4L2_CID_CAMERA_CLASS           (V4L2_CTRL_CLASS_CAMERA | 1)
-
-#define V4L2_CID_EXPOSURE_AUTO                  (V4L2_CID_CAMERA_CLASS_BASE+1)
-enum  <link linkend="v4l2-exposure-auto-type">v4l2_exposure_auto_type</link> {
-        V4L2_EXPOSURE_AUTO = 0,
-        V4L2_EXPOSURE_MANUAL = 1,
-        V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
-        V4L2_EXPOSURE_APERTURE_PRIORITY = 3
-};
-#define V4L2_CID_EXPOSURE_ABSOLUTE              (V4L2_CID_CAMERA_CLASS_BASE+2)
-#define V4L2_CID_EXPOSURE_AUTO_PRIORITY         (V4L2_CID_CAMERA_CLASS_BASE+3)
-
-#define V4L2_CID_PAN_RELATIVE                   (V4L2_CID_CAMERA_CLASS_BASE+4)
-#define V4L2_CID_TILT_RELATIVE                  (V4L2_CID_CAMERA_CLASS_BASE+5)
-#define V4L2_CID_PAN_RESET                      (V4L2_CID_CAMERA_CLASS_BASE+6)
-#define V4L2_CID_TILT_RESET                     (V4L2_CID_CAMERA_CLASS_BASE+7)
-
-#define V4L2_CID_PAN_ABSOLUTE                   (V4L2_CID_CAMERA_CLASS_BASE+8)
-#define V4L2_CID_TILT_ABSOLUTE                  (V4L2_CID_CAMERA_CLASS_BASE+9)
-
-#define V4L2_CID_FOCUS_ABSOLUTE                 (V4L2_CID_CAMERA_CLASS_BASE+10)
-#define V4L2_CID_FOCUS_RELATIVE                 (V4L2_CID_CAMERA_CLASS_BASE+11)
-#define V4L2_CID_FOCUS_AUTO                     (V4L2_CID_CAMERA_CLASS_BASE+12)
-
-#define V4L2_CID_ZOOM_ABSOLUTE                  (V4L2_CID_CAMERA_CLASS_BASE+13)
-#define V4L2_CID_ZOOM_RELATIVE                  (V4L2_CID_CAMERA_CLASS_BASE+14)
-#define V4L2_CID_ZOOM_CONTINUOUS                (V4L2_CID_CAMERA_CLASS_BASE+15)
-
-#define V4L2_CID_PRIVACY                        (V4L2_CID_CAMERA_CLASS_BASE+16)
-
-#define V4L2_CID_IRIS_ABSOLUTE                  (V4L2_CID_CAMERA_CLASS_BASE+17)
-#define V4L2_CID_IRIS_RELATIVE                  (V4L2_CID_CAMERA_CLASS_BASE+18)
-
-/* FM Modulator class control IDs */
-#define V4L2_CID_FM_TX_CLASS_BASE               (V4L2_CTRL_CLASS_FM_TX | 0x900)
-#define V4L2_CID_FM_TX_CLASS                    (V4L2_CTRL_CLASS_FM_TX | 1)
-
-#define V4L2_CID_RDS_TX_DEVIATION               (V4L2_CID_FM_TX_CLASS_BASE + 1)
-#define V4L2_CID_RDS_TX_PI                      (V4L2_CID_FM_TX_CLASS_BASE + 2)
-#define V4L2_CID_RDS_TX_PTY                     (V4L2_CID_FM_TX_CLASS_BASE + 3)
-#define V4L2_CID_RDS_TX_PS_NAME                 (V4L2_CID_FM_TX_CLASS_BASE + 5)
-#define V4L2_CID_RDS_TX_RADIO_TEXT              (V4L2_CID_FM_TX_CLASS_BASE + 6)
-
-#define V4L2_CID_AUDIO_LIMITER_ENABLED          (V4L2_CID_FM_TX_CLASS_BASE + 64)
-#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME     (V4L2_CID_FM_TX_CLASS_BASE + 65)
-#define V4L2_CID_AUDIO_LIMITER_DEVIATION        (V4L2_CID_FM_TX_CLASS_BASE + 66)
-
-#define V4L2_CID_AUDIO_COMPRESSION_ENABLED      (V4L2_CID_FM_TX_CLASS_BASE + 80)
-#define V4L2_CID_AUDIO_COMPRESSION_GAIN         (V4L2_CID_FM_TX_CLASS_BASE + 81)
-#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD    (V4L2_CID_FM_TX_CLASS_BASE + 82)
-#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME  (V4L2_CID_FM_TX_CLASS_BASE + 83)
-#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 84)
-
-#define V4L2_CID_PILOT_TONE_ENABLED             (V4L2_CID_FM_TX_CLASS_BASE + 96)
-#define V4L2_CID_PILOT_TONE_DEVIATION           (V4L2_CID_FM_TX_CLASS_BASE + 97)
-#define V4L2_CID_PILOT_TONE_FREQUENCY           (V4L2_CID_FM_TX_CLASS_BASE + 98)
-
-#define V4L2_CID_TUNE_PREEMPHASIS               (V4L2_CID_FM_TX_CLASS_BASE + 112)
-enum <link linkend="v4l2-preemphasis">v4l2_preemphasis</link> {
-        V4L2_PREEMPHASIS_DISABLED       = 0,
-        V4L2_PREEMPHASIS_50_uS          = 1,
-        V4L2_PREEMPHASIS_75_uS          = 2,
-};
-#define V4L2_CID_TUNE_POWER_LEVEL               (V4L2_CID_FM_TX_CLASS_BASE + 113)
-#define V4L2_CID_TUNE_ANTENNA_CAPACITOR         (V4L2_CID_FM_TX_CLASS_BASE + 114)
-
-/*
- *      T U N I N G
- */
-struct <link linkend="v4l2-tuner">v4l2_tuner</link> {
-        __u32                   index;
-        __u8                    name[32];
-        enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link>    type;
-        __u32                   capability;
-        __u32                   rangelow;
-        __u32                   rangehigh;
-        __u32                   rxsubchans;
-        __u32                   audmode;
-        __s32                   signal;
-        __s32                   afc;
-        __u32                   reserved[4];
-};
-
-struct <link linkend="v4l2-modulator">v4l2_modulator</link> {
-        __u32                   index;
-        __u8                    name[32];
-        __u32                   capability;
-        __u32                   rangelow;
-        __u32                   rangehigh;
-        __u32                   txsubchans;
-        __u32                   reserved[4];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW              0x0001
-#define V4L2_TUNER_CAP_NORM             0x0002
-#define V4L2_TUNER_CAP_STEREO           0x0010
-#define V4L2_TUNER_CAP_LANG2            0x0020
-#define V4L2_TUNER_CAP_SAP              0x0020
-#define V4L2_TUNER_CAP_LANG1            0x0040
-#define V4L2_TUNER_CAP_RDS              0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO     0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS     0x0200
-
-/*  Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO             0x0001
-#define V4L2_TUNER_SUB_STEREO           0x0002
-#define V4L2_TUNER_SUB_LANG2            0x0004
-#define V4L2_TUNER_SUB_SAP              0x0004
-#define V4L2_TUNER_SUB_LANG1            0x0008
-#define V4L2_TUNER_SUB_RDS              0x0010
-
-/*  Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO            0x0000
-#define V4L2_TUNER_MODE_STEREO          0x0001
-#define V4L2_TUNER_MODE_LANG2           0x0002
-#define V4L2_TUNER_MODE_SAP             0x0002
-#define V4L2_TUNER_MODE_LANG1           0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2     0x0004
-
-struct <link linkend="v4l2-frequency">v4l2_frequency</link> {
-        __u32                 tuner;
-        enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link>  type;
-        __u32                 frequency;
-        __u32                 reserved[8];
-};
-
-struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link> {
-        __u32                 tuner;
-        enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link>  type;
-        __u32                 seek_upward;
-        __u32                 wrap_around;
-        __u32                 spacing;
-        __u32                 reserved[7];
-};
-
-/*
- *      R D S
- */
-
-struct <link linkend="v4l2-rds-data">v4l2_rds_data</link> {
-        __u8    lsb;
-        __u8    msb;
-        __u8    block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK       0x7
-#define V4L2_RDS_BLOCK_A         0
-#define V4L2_RDS_BLOCK_B         1
-#define V4L2_RDS_BLOCK_C         2
-#define V4L2_RDS_BLOCK_D         3
-#define V4L2_RDS_BLOCK_C_ALT     4
-#define V4L2_RDS_BLOCK_INVALID   7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR     0x80
-
-/*
- *      A U D I O
- */
-struct <link linkend="v4l2-audio">v4l2_audio</link> {
-        __u32   index;
-        __u8    name[32];
-        __u32   capability;
-        __u32   mode;
-        __u32   reserved[2];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO              0x00001
-#define V4L2_AUDCAP_AVL                 0x00002
-
-/*  Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL                0x00001
-
-struct <link linkend="v4l2-audioout">v4l2_audioout</link> {
-        __u32   index;
-        __u8    name[32];
-        __u32   capability;
-        __u32   mode;
-        __u32   reserved[2];
-};
-
-/*
- *      M P E G   S E R V I C E S
- *
- *      NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I    (0)
-#define V4L2_ENC_IDX_FRAME_P    (1)
-#define V4L2_ENC_IDX_FRAME_B    (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct <link linkend="v4l2-enc-idx-entry">v4l2_enc_idx_entry</link> {
-        __u64 offset;
-        __u64 pts;
-        __u32 length;
-        __u32 flags;
-        __u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct <link linkend="v4l2-enc-idx">v4l2_enc_idx</link> {
-        __u32 entries;
-        __u32 entries_cap;
-        __u32 reserved[4];
-        struct <link linkend="v4l2-enc-idx-entry">v4l2_enc_idx_entry</link> entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START      (0)
-#define V4L2_ENC_CMD_STOP       (1)
-#define V4L2_ENC_CMD_PAUSE      (2)
-#define V4L2_ENC_CMD_RESUME     (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 &lt;&lt; 0)
-
-struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link> {
-        __u32 cmd;
-        __u32 flags;
-        union {
-                struct {
-                        __u32 data[8];
-                } raw;
-        };
-};
-
-#endif
-
-
-/*
- *      D A T A   S E R V I C E S   ( V B I )
- *
- *      Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct <link linkend="v4l2-vbi-format">v4l2_vbi_format</link> {
-        __u32   sampling_rate;          /* in 1 Hz */
-        __u32   offset;
-        __u32   samples_per_line;
-        __u32   sample_format;          /* V4L2_PIX_FMT_* */
-        __s32   start[2];
-        __u32   count[2];
-        __u32   flags;                  /* V4L2_VBI_* */
-        __u32   reserved[2];            /* must be zero */
-};
-
-/*  VBI flags  */
-#define V4L2_VBI_UNSYNC         (1 &lt;&lt; 0)
-#define V4L2_VBI_INTERLACED     (1 &lt;&lt; 1)
-
-/* Sliced VBI
- *
- *    This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct <link linkend="v4l2-sliced-vbi-format">v4l2_sliced_vbi_format</link> {
-        __u16   service_set;
-        /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-           service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-                                 (equals frame lines 313-336 for 625 line video
-                                  standards, 263-286 for 525 line standards) */
-        __u16   service_lines[2][24];
-        __u32   io_size;
-        __u32   reserved[2];            /* must be zero */
-};
-
-/* Teletext World System Teletext
-   (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B          (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS                 (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525         (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625             (0x4000)
-
-#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct <link linkend="v4l2-sliced-vbi-cap">v4l2_sliced_vbi_cap</link> {
-        __u16   service_set;
-        /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-           service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-                                 (equals frame lines 313-336 for 625 line video
-                                  standards, 263-286 for 525 line standards) */
-        __u16   service_lines[2][24];
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type;
-        __u32   reserved[3];    /* must be 0 */
-};
-
-struct <link linkend="v4l2-sliced-vbi-data">v4l2_sliced_vbi_data</link> {
-        __u32   id;
-        __u32   field;          /* 0: first field, 1: second field */
-        __u32   line;           /* 1-23 */
-        __u32   reserved;       /* must be 0 */
-        __u8    data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here.  See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
-#define V4L2_MPEG_VBI_IVTV_VPS            (7)
-
-struct <link linkend="v4l2-mpeg-vbi-itv0-line">v4l2_mpeg_vbi_itv0_line</link> {
-        __u8 id;        /* One of V4L2_MPEG_VBI_IVTV_* above */
-        __u8 data[42];  /* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct <link linkend="v4l2-mpeg-vbi-itv0">v4l2_mpeg_vbi_itv0</link> {
-        __le32 linemask[2]; /* Bitmasks of VBI service lines present */
-        struct <link linkend="v4l2-mpeg-vbi-itv0-line">v4l2_mpeg_vbi_itv0_line</link> line[35];
-} __attribute__ ((packed));
-
-struct <link linkend="v4l2-mpeg-vbi-itv0-1">v4l2_mpeg_vbi_ITV0</link> {
-        struct <link linkend="v4l2-mpeg-vbi-itv0-line">v4l2_mpeg_vbi_itv0_line</link> line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0       "itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1       "ITV0"
-
-struct <link linkend="v4l2-mpeg-vbi-fmt-ivtv">v4l2_mpeg_vbi_fmt_ivtv</link> {
-        __u8 magic[4];
-        union {
-                struct <link linkend="v4l2-mpeg-vbi-itv0">v4l2_mpeg_vbi_itv0</link> itv0;
-                struct <link linkend="v4l2-mpeg-vbi-itv0-1">v4l2_mpeg_vbi_ITV0</link> ITV0;
-        };
-} __attribute__ ((packed));
-
-/*
- *      A G G R E G A T E   S T R U C T U R E S
- */
-
-/**
- * struct <link linkend="v4l2-plane-pix-format">v4l2_plane_pix_format</link> - additional, per-plane format definition
- * @sizeimage:          maximum size in bytes required for data, for which
- *                      this plane will be used
- * @bytesperline:       distance in bytes between the leftmost pixels in two
- *                      adjacent lines
- */
-struct <link linkend="v4l2-plane-pix-format">v4l2_plane_pix_format</link> {
-        __u32           sizeimage;
-        __u16           bytesperline;
-        __u16           reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct <link linkend="v4l2-pix-format-mplane">v4l2_pix_format_mplane</link> - multiplanar format definition
- * @width:              image width in pixels
- * @height:             image height in pixels
- * @pixelformat:        little endian four character code (fourcc)
- * @field:              field order (for interlaced video)
- * @colorspace:         supplemental to pixelformat
- * @plane_fmt:          per-plane information
- * @num_planes:         number of planes for this format
- */
-struct <link linkend="v4l2-pix-format-mplane">v4l2_pix_format_mplane</link> {
-        __u32                           width;
-        __u32                           height;
-        __u32                           pixelformat;
-        enum <link linkend="v4l2-field">v4l2_field</link>                 field;
-        enum <link linkend="v4l2-colorspace">v4l2_colorspace</link>            colorspace;
-
-        struct <link linkend="v4l2-plane-pix-format">v4l2_plane_pix_format</link>    plane_fmt[VIDEO_MAX_PLANES];
-        __u8                            num_planes;
-        __u8                            reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct <link linkend="v4l2-format">v4l2_format</link> - stream data format
- * @type:       type of the data stream
- * @pix:        definition of an image format
- * @pix_mp:     definition of a multiplanar image format
- * @win:        definition of an overlaid image
- * @vbi:        raw VBI capture or output parameters
- * @sliced:     sliced VBI capture or output parameters
- * @raw_data:   placeholder for future extensions and custom formats
- */
-struct <link linkend="v4l2-format">v4l2_format</link> {
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type;
-        union {
-                struct <link linkend="v4l2-pix-format">v4l2_pix_format</link>          pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
-                struct <link linkend="v4l2-pix-format-mplane">v4l2_pix_format_mplane</link>   pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
-                struct <link linkend="v4l2-window">v4l2_window</link>              win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
-                struct <link linkend="v4l2-vbi-format">v4l2_vbi_format</link>          vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
-                struct <link linkend="v4l2-sliced-vbi-format">v4l2_sliced_vbi_format</link>   sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
-                __u8    raw_data[200];                   /* user-defined */
-        } fmt;
-};
-
-/*      Stream type-dependent parameters
- */
-struct <link linkend="v4l2-streamparm">v4l2_streamparm</link> {
-        enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> type;
-        union {
-                struct <link linkend="v4l2-captureparm">v4l2_captureparm</link> capture;
-                struct <link linkend="v4l2-outputparm">v4l2_outputparm</link>  output;
-                __u8    raw_data[200];  /* user-defined */
-        } parm;
-};
-
-/*
- *      E V E N T S
- */
-
-#define V4L2_EVENT_ALL                          0
-#define V4L2_EVENT_VSYNC                        1
-#define V4L2_EVENT_EOS                          2
-#define V4L2_EVENT_PRIVATE_START                0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> {
-        /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
-        __u8 field;
-} __attribute__ ((packed));
-
-struct <link linkend="v4l2-event">v4l2_event</link> {
-        __u32                           type;
-        union {
-                struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> vsync;
-                __u8                    data[64];
-        } u;
-        __u32                           pending;
-        __u32                           sequence;
-        struct timespec                 timestamp;
-        __u32                           reserved[9];
-};
-
-struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link> {
-        __u32                           type;
-        __u32                           reserved[7];
-};
-
-/*
- *      A D V A N C E D   D E B U G G I N G
- *
- *      NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- *      FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
-
-struct <link linkend="v4l2-dbg-match">v4l2_dbg_match</link> {
-        __u32 type; /* Match type */
-        union {     /* Match this chip, meaning determined by type */
-                __u32 addr;
-                char name[32];
-        };
-} __attribute__ ((packed));
-
-struct <link linkend="v4l2-dbg-register">v4l2_dbg_register</link> {
-        struct <link linkend="v4l2-dbg-match">v4l2_dbg_match</link> match;
-        __u32 size;     /* register size in bytes */
-        __u64 reg;
-        __u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
-        struct <link linkend="v4l2-dbg-match">v4l2_dbg_match</link> match;
-        __u32 ident;       /* chip identifier as specified in &lt;media/v4l2-chip-ident.h&gt; */
-        __u32 revision;    /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/*
- *      I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP          _IOR('V',  0, struct <link linkend="v4l2-capability">v4l2_capability</link>)
-#define VIDIOC_RESERVED           _IO('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct <link linkend="v4l2-fmtdesc">v4l2_fmtdesc</link>)
-#define VIDIOC_G_FMT            _IOWR('V',  4, struct <link linkend="v4l2-format">v4l2_format</link>)
-#define VIDIOC_S_FMT            _IOWR('V',  5, struct <link linkend="v4l2-format">v4l2_format</link>)
-#define VIDIOC_REQBUFS          _IOWR('V',  8, struct <link linkend="v4l2-requestbuffers">v4l2_requestbuffers</link>)
-#define VIDIOC_QUERYBUF         _IOWR('V',  9, struct <link linkend="v4l2-buffer">v4l2_buffer</link>)
-#define VIDIOC_G_FBUF            _IOR('V', 10, struct <link linkend="v4l2-framebuffer">v4l2_framebuffer</link>)
-#define VIDIOC_S_FBUF            _IOW('V', 11, struct <link linkend="v4l2-framebuffer">v4l2_framebuffer</link>)
-#define VIDIOC_OVERLAY           _IOW('V', 14, int)
-#define VIDIOC_QBUF             _IOWR('V', 15, struct <link linkend="v4l2-buffer">v4l2_buffer</link>)
-#define VIDIOC_DQBUF            _IOWR('V', 17, struct <link linkend="v4l2-buffer">v4l2_buffer</link>)
-#define VIDIOC_STREAMON          _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF         _IOW('V', 19, int)
-#define VIDIOC_G_PARM           _IOWR('V', 21, struct <link linkend="v4l2-streamparm">v4l2_streamparm</link>)
-#define VIDIOC_S_PARM           _IOWR('V', 22, struct <link linkend="v4l2-streamparm">v4l2_streamparm</link>)
-#define VIDIOC_G_STD             _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD             _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD          _IOWR('V', 25, struct <link linkend="v4l2-standard">v4l2_standard</link>)
-#define VIDIOC_ENUMINPUT        _IOWR('V', 26, struct <link linkend="v4l2-input">v4l2_input</link>)
-#define VIDIOC_G_CTRL           _IOWR('V', 27, struct <link linkend="v4l2-control">v4l2_control</link>)
-#define VIDIOC_S_CTRL           _IOWR('V', 28, struct <link linkend="v4l2-control">v4l2_control</link>)
-#define VIDIOC_G_TUNER          _IOWR('V', 29, struct <link linkend="v4l2-tuner">v4l2_tuner</link>)
-#define VIDIOC_S_TUNER           _IOW('V', 30, struct <link linkend="v4l2-tuner">v4l2_tuner</link>)
-#define VIDIOC_G_AUDIO           _IOR('V', 33, struct <link linkend="v4l2-audio">v4l2_audio</link>)
-#define VIDIOC_S_AUDIO           _IOW('V', 34, struct <link linkend="v4l2-audio">v4l2_audio</link>)
-#define VIDIOC_QUERYCTRL        _IOWR('V', 36, struct <link linkend="v4l2-queryctrl">v4l2_queryctrl</link>)
-#define VIDIOC_QUERYMENU        _IOWR('V', 37, struct <link linkend="v4l2-querymenu">v4l2_querymenu</link>)
-#define VIDIOC_G_INPUT           _IOR('V', 38, int)
-#define VIDIOC_S_INPUT          _IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT          _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT         _IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT       _IOWR('V', 48, struct <link linkend="v4l2-output">v4l2_output</link>)
-#define VIDIOC_G_AUDOUT          _IOR('V', 49, struct <link linkend="v4l2-audioout">v4l2_audioout</link>)
-#define VIDIOC_S_AUDOUT          _IOW('V', 50, struct <link linkend="v4l2-audioout">v4l2_audioout</link>)
-#define VIDIOC_G_MODULATOR      _IOWR('V', 54, struct <link linkend="v4l2-modulator">v4l2_modulator</link>)
-#define VIDIOC_S_MODULATOR       _IOW('V', 55, struct <link linkend="v4l2-modulator">v4l2_modulator</link>)
-#define VIDIOC_G_FREQUENCY      _IOWR('V', 56, struct <link linkend="v4l2-frequency">v4l2_frequency</link>)
-#define VIDIOC_S_FREQUENCY       _IOW('V', 57, struct <link linkend="v4l2-frequency">v4l2_frequency</link>)
-#define VIDIOC_CROPCAP          _IOWR('V', 58, struct <link linkend="v4l2-cropcap">v4l2_cropcap</link>)
-#define VIDIOC_G_CROP           _IOWR('V', 59, struct <link linkend="v4l2-crop">v4l2_crop</link>)
-#define VIDIOC_S_CROP            _IOW('V', 60, struct <link linkend="v4l2-crop">v4l2_crop</link>)
-#define VIDIOC_G_JPEGCOMP        _IOR('V', 61, struct <link linkend="v4l2-jpegcompression">v4l2_jpegcompression</link>)
-#define VIDIOC_S_JPEGCOMP        _IOW('V', 62, struct <link linkend="v4l2-jpegcompression">v4l2_jpegcompression</link>)
-#define VIDIOC_QUERYSTD          _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT          _IOWR('V', 64, struct <link linkend="v4l2-format">v4l2_format</link>)
-#define VIDIOC_ENUMAUDIO        _IOWR('V', 65, struct <link linkend="v4l2-audio">v4l2_audio</link>)
-#define VIDIOC_ENUMAUDOUT       _IOWR('V', 66, struct <link linkend="v4l2-audioout">v4l2_audioout</link>)
-#define VIDIOC_G_PRIORITY        _IOR('V', 67, enum <link linkend="v4l2-priority">v4l2_priority</link>)
-#define VIDIOC_S_PRIORITY        _IOW('V', 68, enum <link linkend="v4l2-priority">v4l2_priority</link>)
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct <link linkend="v4l2-sliced-vbi-cap">v4l2_sliced_vbi_cap</link>)
-#define VIDIOC_LOG_STATUS         _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS      _IOWR('V', 71, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
-#define VIDIOC_S_EXT_CTRLS      _IOWR('V', 72, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
-#define VIDIOC_TRY_EXT_CTRLS    _IOWR('V', 73, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES  _IOWR('V', 74, struct <link linkend="v4l2-frmsizeenum">v4l2_frmsizeenum</link>)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct <link linkend="v4l2-frmivalenum">v4l2_frmivalenum</link>)
-#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct <link linkend="v4l2-enc-idx">v4l2_enc_idx</link>)
-#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link>)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link>)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
-   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
-   You must be root to use these ioctls. Never use these in applications! */
-#define VIDIOC_DBG_S_REGISTER    _IOW('V', 79, struct <link linkend="v4l2-dbg-register">v4l2_dbg_register</link>)
-#define VIDIOC_DBG_G_REGISTER   _IOWR('V', 80, struct <link linkend="v4l2-dbg-register">v4l2_dbg_register</link>)
-
-/* Experimental, meant for debugging, testing and internal use.
-   Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link>)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK    _IOW('V', 82, struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link>)
-#define VIDIOC_ENUM_DV_PRESETS  _IOWR('V', 83, struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link>)
-#define VIDIOC_S_DV_PRESET      _IOWR('V', 84, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
-#define VIDIOC_G_DV_PRESET      _IOWR('V', 85, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
-#define VIDIOC_QUERY_DV_PRESET  _IOR('V',  86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
-#define VIDIOC_S_DV_TIMINGS     _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
-#define VIDIOC_G_DV_TIMINGS     _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
-#define VIDIOC_DQEVENT           _IOR('V', 89, struct <link linkend="v4l2-event">v4l2_event</link>)
-#define VIDIOC_SUBSCRIBE_EVENT   _IOW('V', 90, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>)
-#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>)
-
-/* Reminder: when adding new ioctls please add support for them to
-   drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE     192             /* 192-255 are private */
-
-#endif /* __LINUX_VIDEODEV2_H */
-</programlisting>
diff --git a/Documentation/DocBook/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/v4l/vidioc-subscribe-event.xml
deleted file mode 100644
index 8b501791aa6..00000000000
--- a/Documentation/DocBook/v4l/vidioc-subscribe-event.xml
+++ /dev/null
@@ -1,133 +0,0 @@
-<refentry id="vidioc-subscribe-event">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refname>
-    <refpurpose>Subscribe or unsubscribe event</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_event_subscription
-*<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>Subscribe or unsubscribe V4L2 event. Subscribed events are
-    dequeued by using the &VIDIOC-DQEVENT; ioctl.</para>
-
-    <table frame="none" pgwide="1" id="v4l2-event-subscription">
-      <title>struct <structname>v4l2_event_subscription</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>type</structfield></entry>
-	    <entry>Type of the event.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[7]</entry>
-	    <entry>Reserved for future extensions. Drivers and applications
-	    must set the array to zero.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <table frame="none" pgwide="1" id="event-type">
-      <title>Event Types</title>
-      <tgroup cols="3">
-	&cs-def;
-	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_EVENT_ALL</constant></entry>
-	    <entry>0</entry>
-	    <entry>All events. V4L2_EVENT_ALL is valid only for
-	    VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once.
-	    </entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_EVENT_VSYNC</constant></entry>
-	    <entry>1</entry>
-	    <entry>This event is triggered on the vertical sync.
-	    This event has &v4l2-event-vsync; associated with it.
-	    </entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_EVENT_EOS</constant></entry>
-	    <entry>2</entry>
-	    <entry>This event is triggered when the end of a stream is reached.
-	    This is typically used with MPEG decoders to report to the application
-	    when the last of the MPEG stream has been decoded.
-	    </entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_EVENT_PRIVATE_START</constant></entry>
-	    <entry>0x08000000</entry>
-	    <entry>Base event number for driver-private events.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <table frame="none" pgwide="1" id="v4l2-event-vsync">
-      <title>struct <structname>v4l2_event_vsync</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u8</entry>
-	    <entry><structfield>field</structfield></entry>
-	    <entry>The upcoming field. See &v4l2-field;.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-  </refsect1>
-</refentry>
-<!--
-Local Variables:
-mode: sgml
-sgml-parent-document: "v4l2.sgml"
-indent-tabs-mode: nil
-End:
--->
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 3348d313fbe..c466f5831f1 100644..100755
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -27,7 +27,7 @@ use IO::Handle;
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
 		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
 		"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
-		"lme2510c_s7395_old");
+		"lme2510c_s7395_old", "drxk", "drxk_terratec_h5");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -634,6 +634,37 @@ sub lme2510c_s7395_old {
     $outfile;
 }
 
+sub drxk {
+    my $url = "http://l4m-daten.de/files/";
+    my $zipfile = "DDTuner.zip";
+    my $hash = "f5a37b9a20a3534997997c0b1382a3e5";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+    my $drvfile = "DDTuner.sys";
+    my $fwfile = "drxk_a3.mc";
+
+    checkstandard();
+
+    wgetfile($zipfile, $url . $zipfile);
+    verify($zipfile, $hash);
+    unzip($zipfile, $tmpdir);
+    extract("$tmpdir/$drvfile", 0x14dd8, 15634, "$fwfile");
+
+    "$fwfile"
+}
+
+sub drxk_terratec_h5 {
+    my $url = "http://www.linuxtv.org/downloads/firmware/";
+    my $hash = "19000dada8e2741162ccc50cc91fa7f1";
+    my $fwfile = "dvb-usb-terratec-h5-drxk.fw";
+
+    checkstandard();
+
+    wgetfile($fwfile, $url . $fwfile);
+    verify($fwfile, $hash);
+
+    "$fwfile"
+}
+
 # ---------------------------------------------------------------
 # Utilities
 
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index dfd6a9f4a58..ea0bace0124 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -527,6 +527,41 @@ Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 ----------------------------
 
+What:	Support for driver specific ioctls in the pwc driver (everything
+	defined in media/pwc-ioctl.h)
+When:	3.3
+Why:	This stems from the v4l1 era, with v4l2 everything can be done with
+	standardized v4l2 API calls
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	Driver specific sysfs API in the pwc driver
+When:	3.3
+Why:	Setting pan/tilt should be done with v4l2 controls, like with other
+	cams. The button is available as a standard input device
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	Driver specific use of pixfmt.priv in the pwc driver
+When:	3.3
+Why:	The .priv field never was intended for this, setting a framerate is
+	support using the standardized S_PARM ioctl
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
+What:	Software emulation of arbritary resolutions in the pwc driver
+When:	3.3
+Why:	The pwc driver claims to support any resolution between 160x120
+	and 640x480, but emulates this by simply drawing a black border
+	around the image. Userspace can draw its own black border if it
+	really wants one.
+Who:	Hans de Goede <hdegoede@redhat.com>
+
+----------------------------
+
 What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
 	If not, return -EINVAL.
 When:	3.2
diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt
index 76a2087db20..669b5fb03a8 100644
--- a/Documentation/media-framework.txt
+++ b/Documentation/media-framework.txt
@@ -310,7 +310,7 @@ is non-immutable. The operation must either configure the hardware or store
 the configuration information to be applied later.
 
 Link configuration must not have any side effect on other links. If an enabled
-link at a sink pad prevents another link at the same pad from being disabled,
+link at a sink pad prevents another link at the same pad from being enabled,
 the link_setup operation must return -EBUSY and can't implicitly disable the
 first enabled link.
 
diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html
index d72fd2aa915..256f8efa992 100644
--- a/Documentation/video4linux/API.html
+++ b/Documentation/video4linux/API.html
@@ -9,7 +9,7 @@
   <table border="0">
    <tr>
     <td>
-     <a href="http://www.linuxtv.org/downloads/video4linux/API/V4L1_API.html">V4L original API</a>
+     <a href="http://linuxtv.org/downloads/legacy/video4linux/API/V4L1_API.html">V4L original API</a>
     </td>
     <td>
      Obsoleted by V4L2 API
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 87c46347bd6..8910449d23a 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -27,3 +27,5 @@
  26 -> Hauppauge WinTV-HVR1290                             [0070:8551]
  27 -> Mygica X8558 PRO DMB-TH                             [14f1:8578]
  28 -> LEADTEK WinFast PxTV1200                            [107d:6f22]
+ 29 -> GoTView X5 3D Hybrid                                [5654:2390]
+ 30 -> NetUP Dual DVB-T/C-CI RF                            [1b55:e2e4]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 42517d9121d..d9c0f119196 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -84,3 +84,4 @@
  83 -> Prof 7301 DVB-S/S2                                  [b034:3034]
  84 -> Samsung SMT 7020 DVB-S                              [18ac:dc00,18ac:dccd]
  85 -> Twinhan VP-1027 DVB-S                               [1822:0023]
+ 86 -> TeVii S464 DVB-S/S2                                 [d464:9022]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 9aae449440d..4a7b3df6d8b 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -74,3 +74,5 @@
  74 -> Actionmaster/LinXcel/Digitus VC211A      (em2800)
  75 -> Dikom DK300                              (em2882)
  76 -> KWorld PlusTV 340U or UB435-Q (ATSC)     (em2870)        [1b80:a340]
+ 77 -> EM2874 Leadership ISDBT                  (em2874)
+ 78 -> PCTV nanoStick T2 290e                   (em28174)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 6b4c72d8862..7efae9bd73e 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -182,3 +182,7 @@
 181 -> TechoTrend TT-budget T-3000              [13c2:2804]
 182 -> Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid  [17de:b136]
 183 -> Compro VideoMate Vista M1F               [185b:c900]
+184 -> Encore ENLTV-FM 3                        [1a7f:2108]
+185 -> MagicPro ProHDTV Pro2 DMB-TH/Hybrid      [17de:d136]
+186 -> Beholder BeholdTV 501                    [5ace:5010]
+187 -> Beholder BeholdTV 503 FM                 [5ace:5030]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index e67c1db9685..6323b7a2071 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -78,8 +78,10 @@ tuner=77 - TCL tuner MF02GIP-5N-E
 tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner
 tuner=79 - Philips PAL/SECAM multi (FM1216 MK5)
 tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
+tuner=81 - Xceive 4000 tuner
 tuner=81 - Partsnic (Daewoo) PTI-5NF05
 tuner=82 - Philips CU1216L
 tuner=83 - NXP TDA18271
 tuner=84 - Sony BTF-Pxn01Z
 tuner=85 - Philips FQ1236 MK5
+tuner=86 - Tena TNF5337 MFD
diff --git a/Documentation/video4linux/CARDLIST.usbvision b/Documentation/video4linux/CARDLIST.usbvision
index 0b72d3fee17..6fd1af36514 100644
--- a/Documentation/video4linux/CARDLIST.usbvision
+++ b/Documentation/video4linux/CARDLIST.usbvision
@@ -63,3 +63,5 @@
  62 -> Pinnacle PCTV Bungee USB (PAL) FM                        [2304:0419]
  63 -> Hauppauge WinTv-USB                                      [2400:4200]
  64 -> Pinnacle Studio PCTV USB (NTSC) FM V3                    [2304:0113]
+ 65 -> Nogatech USB MicroCam NTSC (NV3000N)                     [0573:3000]
+ 66 -> Nogatech USB MicroCam PAL (NV3001P)                      [0573:3001]
diff --git a/Documentation/video4linux/README.davinci-vpbe b/Documentation/video4linux/README.davinci-vpbe
new file mode 100644
index 00000000000..7a460b0685b
--- /dev/null
+++ b/Documentation/video4linux/README.davinci-vpbe
@@ -0,0 +1,93 @@
+
+                VPBE V4L2 driver design
+ ======================================================================
+
+ File partitioning
+ -----------------
+ V4L2 display device driver
+         drivers/media/video/davinci/vpbe_display.c
+         drivers/media/video/davinci/vpbe_display.h
+
+ VPBE display controller
+         drivers/media/video/davinci/vpbe.c
+         drivers/media/video/davinci/vpbe.h
+
+ VPBE venc sub device driver
+         drivers/media/video/davinci/vpbe_venc.c
+         drivers/media/video/davinci/vpbe_venc.h
+         drivers/media/video/davinci/vpbe_venc_regs.h
+
+ VPBE osd driver
+         drivers/media/video/davinci/vpbe_osd.c
+         drivers/media/video/davinci/vpbe_osd.h
+         drivers/media/video/davinci/vpbe_osd_regs.h
+
+ Functional partitioning
+ -----------------------
+
+ Consists of the following (in the same order as the list under file
+ partitioning):-
+
+ 1. V4L2 display driver
+    Implements creation of video2 and video3 device nodes and
+    provides v4l2 device interface to manage VID0 and VID1 layers.
+
+ 2. Display controller
+    Loads up VENC, OSD and external encoders such as ths8200. It provides
+    a set of API calls to V4L2 drivers to set the output/standards
+    in the VENC or external sub devices. It also provides
+    a device object to access the services from OSD subdevice
+    using sub device ops. The connection of external encoders to VENC LCD
+    controller port is done at init time based on default output and standard
+    selection or at run time when application change the output through
+    V4L2 IOCTLs.
+
+    When connected to an external encoder, vpbe controller is also responsible
+    for setting up the interface between VENC and external encoders based on
+    board specific settings (specified in board-xxx-evm.c). This allows
+    interfacing external encoders such as ths8200. The setup_if_config()
+    is implemented for this as well as configure_venc() (part of the next patch)
+    API to set timings in VENC for a specific display resolution. As of this
+    patch series, the interconnection and enabling and setting of the external
+    encoders is not present, and would be a part of the next patch series.
+
+ 3. VENC subdevice module
+    Responsible for setting outputs provided through internal DACs and also
+    setting timings at LCD controller port when external encoders are connected
+    at the port or LCD panel timings required. When external encoder/LCD panel
+    is connected, the timings for a specific standard/preset is retrieved from
+    the board specific table and the values are used to set the timings in
+    venc using non-standard timing mode.
+
+    Support LCD Panel displays using the VENC. For example to support a Logic
+    PD display, it requires setting up the LCD controller port with a set of
+    timings for the resolution supported and setting the dot clock. So we could
+    add the available outputs as a board specific entry (i.e add the "LogicPD"
+    output name to board-xxx-evm.c). A table of timings for various LCDs
+    supported can be maintained in the board specific setup file to support
+    various LCD displays.As of this patch a basic driver is present, and this
+    support for external encoders and displays forms a part of the next
+    patch series.
+
+ 4. OSD module
+    OSD module implements all OSD layer management and hardware specific
+    features. The VPBE module interacts with the OSD for enabling and
+    disabling appropriate features of the OSD.
+
+ Current status:-
+
+ A fully functional working version of the V4L2 driver is available. This
+ driver has been tested with NTSC and PAL standards and buffer streaming.
+
+ Following are TBDs.
+
+ vpbe display controller
+    - Add support for external encoders.
+    - add support for selecting external encoder as default at probe time.
+
+ vpbe venc sub device
+    - add timings for supporting ths8200
+    - add support for LogicPD LCD.
+
+ FB drivers
+    - Add support for fbdev drivers.- Ready and part of subsequent patches.
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
index 881e7f44491..9346fc8cbf2 100644
--- a/Documentation/video4linux/v4l2-controls.txt
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -277,16 +277,13 @@ implement g_volatile_ctrl like this:
 	{
 		switch (ctrl->id) {
 		case V4L2_CID_BRIGHTNESS:
-			ctrl->cur.val = read_reg(0x123);
+			ctrl->val = read_reg(0x123);
 			break;
 		}
 	}
 
-The 'new value' union is not used in g_volatile_ctrl. In general controls
-that need to implement g_volatile_ctrl are read-only controls.
-
-Note that if one or more controls in a control cluster are marked as volatile,
-then all the controls in the cluster are seen as volatile.
+Note that you use the 'new value' union as well in g_volatile_ctrl. In general
+controls that need to implement g_volatile_ctrl are read-only controls.
 
 To mark a control as volatile you have to set the is_volatile flag:
 
@@ -453,6 +450,25 @@ In the example above the following are equivalent for the VOLUME case:
 	ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
 	ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
 
+In practice using cluster arrays like this becomes very tiresome. So instead
+the following equivalent method is used:
+
+	struct {
+		/* audio cluster */
+		struct v4l2_ctrl *volume;
+		struct v4l2_ctrl *mute;
+	};
+
+The anonymous struct is used to clearly 'cluster' these two control pointers,
+but it serves no other purpose. The effect is the same as creating an
+array with two control pointers. So you can just do:
+
+	state->volume = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	state->mute = v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	v4l2_ctrl_cluster(2, &state->volume);
+
+And in foo_s_ctrl you can use these pointers directly: state->mute->val.
+
 Note that controls in a cluster may be NULL. For example, if for some
 reason mute was never added (because the hardware doesn't support that
 particular feature), then mute will be NULL. So in that case we have a
@@ -475,6 +491,43 @@ controls, then the 'is_new' flag would be 1 for both controls.
 The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup().
 
 
+Handling autogain/gain-type Controls with Auto Clusters
+=======================================================
+
+A common type of control cluster is one that handles 'auto-foo/foo'-type
+controls. Typical examples are autogain/gain, autoexposure/exposure,
+autowhitebalance/red balance/blue balance. In all cases you have one controls
+that determines whether another control is handled automatically by the hardware,
+or whether it is under manual control from the user.
+
+If the cluster is in automatic mode, then the manual controls should be
+marked inactive. When the volatile controls are read the g_volatile_ctrl
+operation should return the value that the hardware's automatic mode set up
+automatically.
+
+If the cluster is put in manual mode, then the manual controls should become
+active again and the is_volatile flag should be ignored (so g_volatile_ctrl is
+no longer called while in manual mode).
+
+Finally the V4L2_CTRL_FLAG_UPDATE should be set for the auto control since
+changing that control affects the control flags of the manual controls.
+
+In order to simplify this a special variation of v4l2_ctrl_cluster was
+introduced:
+
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			u8 manual_val, bool set_volatile);
+
+The first two arguments are identical to v4l2_ctrl_cluster. The third argument
+tells the framework which value switches the cluster into manual mode. The
+last argument will optionally set the is_volatile flag for the non-auto controls.
+
+The first control of the cluster is assumed to be the 'auto' control.
+
+Using this function will ensure that you don't need to handle all the complex
+flag and volatile handling.
+
+
 VIDIOC_LOG_STATUS Support
 =========================
 
@@ -636,9 +689,7 @@ button controls are write-only controls.
 -EINVAL as the spec says.
 
 5) The spec does not mention what should happen when you try to set/get a
-control class controls. ivtv currently returns -EINVAL (indicating that the
-control ID does not exist) while the framework will return -EACCES, which
-makes more sense.
+control class controls. The framework will return -EACCES.
 
 
 Proposals for Extensions
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index cf21f7aae97..f8dcabf7852 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -817,11 +817,7 @@ int my_open(struct file *file)
 
 	...
 
-	ret = v4l2_fh_init(&my_fh->fh, vfd);
-	if (ret) {
-		kfree(my_fh);
-		return ret;
-	}
+	v4l2_fh_init(&my_fh->fh, vfd);
 
 	...
 
@@ -844,7 +840,7 @@ int my_release(struct file *file)
 
 Below is a short description of the v4l2_fh functions used:
 
-int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
 
   Initialise the file handle. This *MUST* be performed in the driver's
   v4l2_file_operations->open() handler.
@@ -901,14 +897,38 @@ V4L2 events
 The V4L2 events provide a generic way to pass events to user space.
 The driver must use v4l2_fh to be able to support V4L2 events.
 
-Useful functions:
+Events are defined by a type and an optional ID. The ID may refer to a V4L2
+object such as a control ID. If unused, then the ID is 0.
+
+When the user subscribes to an event the driver will allocate a number of
+kevent structs for that event. So every (type, ID) event tuple will have
+its own set of kevent structs. This guarantees that if a driver is generating
+lots of events of one type in a short time, then that will not overwrite
+events of another type.
+
+But if you get more events of one type than the number of kevents that were
+reserved, then the oldest event will be dropped and the new one added.
+
+Furthermore, the internal struct v4l2_subscribed_event has merge() and
+replace() callbacks which drivers can set. These callbacks are called when
+a new event is raised and there is no more room. The replace() callback
+allows you to replace the payload of the old event with that of the new event,
+merging any relevant data from the old payload into the new payload that
+replaces it. It is called when this event type has only one kevent struct
+allocated. The merge() callback allows you to merge the oldest event payload
+into that of the second-oldest event payload. It is called when there are two
+or more kevent structs allocated.
 
-- v4l2_event_alloc()
+This way no status information is lost, just the intermediate steps leading
+up to that state.
 
-  To use events, the driver must allocate events for the file handle. By
-  calling the function more than once, the driver may assure that at least n
-  events in total have been allocated. The function may not be called in
-  atomic context.
+A good example of these replace/merge callbacks is in v4l2-event.c:
+ctrls_replace() and ctrls_merge() callbacks for the control event.
+
+Note: these callbacks can be called from interrupt context, so they must be
+fast.
+
+Useful functions:
 
 - v4l2_event_queue()
 
@@ -920,7 +940,9 @@ Useful functions:
 
   The video_device->ioctl_ops->vidioc_subscribe_event must check the driver
   is able to produce events with specified event id. Then it calls
-  v4l2_event_subscribe() to subscribe the event.
+  v4l2_event_subscribe() to subscribe the event. The last argument is the
+  size of the event queue for this event. If it is 0, then the framework
+  will fill in a default value (this depends on the event type).
 
 - v4l2_event_unsubscribe()
 
@@ -935,14 +957,8 @@ Useful functions:
 
   Returns the number of pending events. Useful when implementing poll.
 
-Drivers do not initialise events directly. The events are initialised
-through v4l2_fh_init() if video_device->ioctl_ops->vidioc_subscribe_event is
-non-NULL. This *MUST* be performed in the driver's
-v4l2_file_operations->open() handler.
-
 Events are delivered to user space through the poll system call. The driver
-can use v4l2_fh->events->wait wait_queue_head_t as the argument for
-poll_wait().
+can use v4l2_fh->wait (a wait_queue_head_t) as the argument for poll_wait().
 
 There are standard and private events. New standard events must use the
 smallest available event type. The drivers must allocate their events from
@@ -952,5 +968,4 @@ The first event type in the class is reserved for future use, so the first
 available event type is 'class base + 1'.
 
 An example on how the V4L2 events may be used can be found in the OMAP
-3 ISP driver available at <URL:http://gitorious.org/omap3camera> as of
-writing this.
+3 ISP driver (drivers/media/video/omap3isp).
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index cc503aa89c5..5a886cd2c59 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -418,6 +418,10 @@ static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
 };
 
+static struct regulator_consumer_supply rx51_vaux2_supply[] = {
+	REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
+};
+
 static struct regulator_consumer_supply rx51_vaux3_supply[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 };
@@ -479,6 +483,8 @@ static struct regulator_init_data rx51_vaux2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux2_supply),
+	.consumer_supplies	= rx51_vaux2_supply,
 };
 
 /* VAUX3 - adds more power to VIO_18 rail */
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 837138e369b..9e0856b2f9e 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -957,19 +957,16 @@ static struct resource csi2_resources[] = {
 	},
 };
 
-static struct platform_device csi2_device = {
-	.name   = "sh-mobile-csi2",
-	.id     = 0,
+static struct sh_mobile_ceu_companion csi2 = {
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(csi2_resources),
 	.resource	= csi2_resources,
-	.dev    = {
-		.platform_data = &csi2_info,
-	},
+	.platform_data	= &csi2_info,
 };
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.csi2_dev = &csi2_device.dev,
+	.csi2 = &csi2,
 };
 
 static struct resource ceu_resources[] = {
@@ -1013,7 +1010,6 @@ static struct platform_device *ap4evb_devices[] __initdata = {
 	&lcdc1_device,
 	&lcdc_device,
 	&hdmi_device,
-	&csi2_device,
 	&ceu_device,
 	&ap4evb_camera,
 	&meram_device,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 5b36b6c5b44..d41c01f83f1 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1192,8 +1192,8 @@ static struct platform_device sh_mmcif_device = {
 };
 
 
-static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev);
-static void mackerel_camera_del(struct soc_camera_link *icl);
+static int mackerel_camera_add(struct soc_camera_device *icd);
+static void mackerel_camera_del(struct soc_camera_device *icd);
 
 static int camera_set_capture(struct soc_camera_platform_info *info,
 			      int enable)
@@ -1232,16 +1232,15 @@ static void mackerel_camera_release(struct device *dev)
 	soc_camera_platform_release(&camera_device);
 }
 
-static int mackerel_camera_add(struct soc_camera_link *icl,
-			       struct device *dev)
+static int mackerel_camera_add(struct soc_camera_device *icd)
 {
-	return soc_camera_platform_add(icl, dev, &camera_device, &camera_link,
+	return soc_camera_platform_add(icd, &camera_device, &camera_link,
 				       mackerel_camera_release, 0);
 }
 
-static void mackerel_camera_del(struct soc_camera_link *icl)
+static void mackerel_camera_del(struct soc_camera_device *icd)
 {
-	soc_camera_platform_del(icl, camera_device, &camera_link);
+	soc_camera_platform_del(icd, camera_device, &camera_link);
 }
 
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 1dc924b2f50..d3626575891 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -332,8 +332,8 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
 	return ret;
 }
 
-static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev);
-static void ap325rxa_camera_del(struct soc_camera_link *icl);
+static int ap325rxa_camera_add(struct soc_camera_device *icd);
+static void ap325rxa_camera_del(struct soc_camera_device *icd);
 
 static struct soc_camera_platform_info camera_info = {
 	.format_name = "UYVY",
@@ -366,24 +366,23 @@ static void ap325rxa_camera_release(struct device *dev)
 	soc_camera_platform_release(&camera_device);
 }
 
-static int ap325rxa_camera_add(struct soc_camera_link *icl,
-			       struct device *dev)
+static int ap325rxa_camera_add(struct soc_camera_device *icd)
 {
-	int ret = soc_camera_platform_add(icl, dev, &camera_device, &camera_link,
+	int ret = soc_camera_platform_add(icd, &camera_device, &camera_link,
 					  ap325rxa_camera_release, 0);
 	if (ret < 0)
 		return ret;
 
 	ret = camera_probe();
 	if (ret < 0)
-		soc_camera_platform_del(icl, camera_device, &camera_link);
+		soc_camera_platform_del(icd, camera_device, &camera_link);
 
 	return ret;
 }
 
-static void ap325rxa_camera_del(struct soc_camera_link *icl)
+static void ap325rxa_camera_del(struct soc_camera_device *icd)
 {
-	soc_camera_platform_del(icl, camera_device, &camera_link);
+	soc_camera_platform_del(icd, camera_device, &camera_link);
 }
 #endif /* CONFIG_I2C */
 
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 6995940b633..9575db429df 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -68,7 +68,6 @@ config VIDEO_V4L2_SUBDEV_API
 
 config DVB_CORE
 	tristate "DVB for Linux"
-	depends on NET && INET
 	select CRC32
 	help
 	  DVB core utility functions for device handling, software fallbacks etc.
@@ -85,6 +84,19 @@ config DVB_CORE
 
 	  If unsure say N.
 
+config DVB_NET
+	bool "DVB Network Support"
+	default (NET && INET)
+	depends on NET && INET && DVB_CORE
+	help
+	  This option enables DVB Network Support which is a part of the DVB
+	  standard. It is used, for example, by automatic firmware updates used
+	  on Set-Top-Boxes. It can also be used to access the Internet via the
+	  DVB card, if the network provider supports it.
+
+	  You may want to disable the network support on embedded devices. If
+	  unsure say Y.
+
 config VIDEO_MEDIA
 	tristate
 	default (DVB_CORE && (VIDEO_DEV = n)) || (VIDEO_DEV && (DVB_CORE = n)) || (DVB_CORE && VIDEO_DEV)
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 22d3ca36370..996302ae210 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -23,6 +23,7 @@ config MEDIA_TUNER
 	depends on VIDEO_MEDIA && I2C
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMISE
@@ -152,6 +153,15 @@ config MEDIA_TUNER_XC5000
 	  This device is only used inside a SiP called together with a
 	  demodulator for now.
 
+config MEDIA_TUNER_XC4000
+	tristate "Xceive XC4000 silicon tuner"
+	depends on VIDEO_MEDIA && I2C
+	default m if MEDIA_TUNER_CUSTOMISE
+	help
+	  A driver for the silicon tuner XC4000 from Xceive.
+	  This device is only used inside a SiP called together with a
+	  demodulator for now.
+
 config MEDIA_TUNER_MXL5005S
 	tristate "MaxLinear MSL5005S silicon tuner"
 	depends on VIDEO_MEDIA && I2C
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 2cb4f532784..20d24fca2cf 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_MEDIA_TUNER_TDA9887) += tda9887.o
 obj-$(CONFIG_MEDIA_TUNER_TDA827X) += tda827x.o
 obj-$(CONFIG_MEDIA_TUNER_TDA18271) += tda18271.o
 obj-$(CONFIG_MEDIA_TUNER_XC5000) += xc5000.o
+obj-$(CONFIG_MEDIA_TUNER_XC4000) += xc4000.o
 obj-$(CONFIG_MEDIA_TUNER_MT2060) += mt2060.o
 obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
 obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c
index afba6dc5e08..94a603a6084 100644
--- a/drivers/media/common/tuners/tuner-types.c
+++ b/drivers/media/common/tuners/tuner-types.c
@@ -1805,6 +1805,10 @@ struct tunertype tuners[] = {
 		.name   = "Xceive 5000 tuner",
 		/* see xc5000.c for details */
 	},
+	[TUNER_XC4000] = { /* Xceive 4000 */
+		.name   = "Xceive 4000 tuner",
+		/* see xc4000.c for details */
+	},
 	[TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */
 		.name   = "TCL tuner MF02GIP-5N-E",
 		.params = tuner_tcl_mf02gip_5n_params,
diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/common/tuners/xc4000.c
new file mode 100644
index 00000000000..634f4d9b6c6
--- /dev/null
+++ b/drivers/media/common/tuners/xc4000.c
@@ -0,0 +1,1691 @@
+/*
+ *  Driver for Xceive XC4000 "QAM/8VSB single chip tuner"
+ *
+ *  Copyright (c) 2007 Xceive Corporation
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *  Copyright (c) 2009 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *  Copyright (c) 2009 Davide Ferri <d.ferri@zero11.it>
+ *  Copyright (c) 2010 Istvan Varga <istvan_v@mailbox.hu>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <asm/unaligned.h>
+
+#include "dvb_frontend.h"
+
+#include "xc4000.h"
+#include "tuner-i2c.h"
+#include "tuner-xc2028-types.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debugging level (0 to 2, default: 0 (off)).");
+
+static int no_poweroff;
+module_param(no_poweroff, int, 0644);
+MODULE_PARM_DESC(no_poweroff, "Power management (1: disabled, 2: enabled, "
+	"0 (default): use device-specific default mode).");
+
+static int audio_std;
+module_param(audio_std, int, 0644);
+MODULE_PARM_DESC(audio_std, "Audio standard. XC4000 audio decoder explicitly "
+	"needs to know what audio standard is needed for some video standards "
+	"with audio A2 or NICAM. The valid settings are a sum of:\n"
+	" 1: use NICAM/B or A2/B instead of NICAM/A or A2/A\n"
+	" 2: use A2 instead of NICAM or BTSC\n"
+	" 4: use SECAM/K3 instead of K1\n"
+	" 8: use PAL-D/K audio for SECAM-D/K\n"
+	"16: use FM radio input 1 instead of input 2\n"
+	"32: use mono audio (the lower three bits are ignored)");
+
+static char firmware_name[30];
+module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0);
+MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
+	"default firmware name.");
+
+static DEFINE_MUTEX(xc4000_list_mutex);
+static LIST_HEAD(hybrid_tuner_instance_list);
+
+#define dprintk(level, fmt, arg...) if (debug >= level) \
+	printk(KERN_INFO "%s: " fmt, "xc4000", ## arg)
+
+/* struct for storing firmware table */
+struct firmware_description {
+	unsigned int  type;
+	v4l2_std_id   id;
+	__u16         int_freq;
+	unsigned char *ptr;
+	unsigned int  size;
+};
+
+struct firmware_properties {
+	unsigned int	type;
+	v4l2_std_id	id;
+	v4l2_std_id	std_req;
+	__u16		int_freq;
+	unsigned int	scode_table;
+	int		scode_nr;
+};
+
+struct xc4000_priv {
+	struct tuner_i2c_props i2c_props;
+	struct list_head hybrid_tuner_instance_list;
+	struct firmware_description *firm;
+	int	firm_size;
+	u32	if_khz;
+	u32	freq_hz;
+	u32	bandwidth;
+	u8	video_standard;
+	u8	rf_mode;
+	u8	default_pm;
+	u8	dvb_amplitude;
+	u8	set_smoothedcvbs;
+	u8	ignore_i2c_write_errors;
+	__u16	firm_version;
+	struct firmware_properties cur_fw;
+	__u16	hwmodel;
+	__u16	hwvers;
+	struct mutex	lock;
+};
+
+#define XC4000_AUDIO_STD_B		 1
+#define XC4000_AUDIO_STD_A2		 2
+#define XC4000_AUDIO_STD_K3		 4
+#define XC4000_AUDIO_STD_L		 8
+#define XC4000_AUDIO_STD_INPUT1		16
+#define XC4000_AUDIO_STD_MONO		32
+
+#define XC4000_DEFAULT_FIRMWARE "dvb-fe-xc4000-1.4.fw"
+
+/* Misc Defines */
+#define MAX_TV_STANDARD			24
+#define XC_MAX_I2C_WRITE_LENGTH		64
+#define XC_POWERED_DOWN			0x80000000U
+
+/* Signal Types */
+#define XC_RF_MODE_AIR			0
+#define XC_RF_MODE_CABLE		1
+
+/* Product id */
+#define XC_PRODUCT_ID_FW_NOT_LOADED	0x2000
+#define XC_PRODUCT_ID_XC4000		0x0FA0
+#define XC_PRODUCT_ID_XC4100		0x1004
+
+/* Registers (Write-only) */
+#define XREG_INIT         0x00
+#define XREG_VIDEO_MODE   0x01
+#define XREG_AUDIO_MODE   0x02
+#define XREG_RF_FREQ      0x03
+#define XREG_D_CODE       0x04
+#define XREG_DIRECTSITTING_MODE 0x05
+#define XREG_SEEK_MODE    0x06
+#define XREG_POWER_DOWN   0x08
+#define XREG_SIGNALSOURCE 0x0A
+#define XREG_SMOOTHEDCVBS 0x0E
+#define XREG_AMPLITUDE    0x10
+
+/* Registers (Read-only) */
+#define XREG_ADC_ENV      0x00
+#define XREG_QUALITY      0x01
+#define XREG_FRAME_LINES  0x02
+#define XREG_HSYNC_FREQ   0x03
+#define XREG_LOCK         0x04
+#define XREG_FREQ_ERROR   0x05
+#define XREG_SNR          0x06
+#define XREG_VERSION      0x07
+#define XREG_PRODUCT_ID   0x08
+
+/*
+   Basic firmware description. This will remain with
+   the driver for documentation purposes.
+
+   This represents an I2C firmware file encoded as a
+   string of unsigned char. Format is as follows:
+
+   char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
+   char[1  ]=len0_LSB  -> length of first write transaction
+   char[2  ]=data0 -> first byte to be sent
+   char[3  ]=data1
+   char[4  ]=data2
+   char[   ]=...
+   char[M  ]=dataN  -> last byte to be sent
+   char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
+   char[M+2]=len1_LSB  -> length of second write transaction
+   char[M+3]=data0
+   char[M+4]=data1
+   ...
+   etc.
+
+   The [len] value should be interpreted as follows:
+
+   len= len_MSB _ len_LSB
+   len=1111_1111_1111_1111   : End of I2C_SEQUENCE
+   len=0000_0000_0000_0000   : Reset command: Do hardware reset
+   len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
+   len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
+
+   For the RESET and WAIT commands, the two following bytes will contain
+   immediately the length of the following transaction.
+*/
+
+struct XC_TV_STANDARD {
+	const char  *Name;
+	u16	    audio_mode;
+	u16	    video_mode;
+	u16	    int_freq;
+};
+
+/* Tuner standards */
+#define XC4000_MN_NTSC_PAL_BTSC		0
+#define XC4000_MN_NTSC_PAL_A2		1
+#define XC4000_MN_NTSC_PAL_EIAJ		2
+#define XC4000_MN_NTSC_PAL_Mono		3
+#define XC4000_BG_PAL_A2		4
+#define XC4000_BG_PAL_NICAM		5
+#define XC4000_BG_PAL_MONO		6
+#define XC4000_I_PAL_NICAM		7
+#define XC4000_I_PAL_NICAM_MONO		8
+#define XC4000_DK_PAL_A2		9
+#define XC4000_DK_PAL_NICAM		10
+#define XC4000_DK_PAL_MONO		11
+#define XC4000_DK_SECAM_A2DK1		12
+#define XC4000_DK_SECAM_A2LDK3		13
+#define XC4000_DK_SECAM_A2MONO		14
+#define XC4000_DK_SECAM_NICAM		15
+#define XC4000_L_SECAM_NICAM		16
+#define XC4000_LC_SECAM_NICAM		17
+#define XC4000_DTV6			18
+#define XC4000_DTV8			19
+#define XC4000_DTV7_8			20
+#define XC4000_DTV7			21
+#define XC4000_FM_Radio_INPUT2		22
+#define XC4000_FM_Radio_INPUT1		23
+
+static struct XC_TV_STANDARD xc4000_standard[MAX_TV_STANDARD] = {
+	{"M/N-NTSC/PAL-BTSC",	0x0000, 0x80A0, 4500},
+	{"M/N-NTSC/PAL-A2",	0x0000, 0x80A0, 4600},
+	{"M/N-NTSC/PAL-EIAJ",	0x0040, 0x80A0, 4500},
+	{"M/N-NTSC/PAL-Mono",	0x0078, 0x80A0, 4500},
+	{"B/G-PAL-A2",		0x0000, 0x8159, 5640},
+	{"B/G-PAL-NICAM",	0x0004, 0x8159, 5740},
+	{"B/G-PAL-MONO",	0x0078, 0x8159, 5500},
+	{"I-PAL-NICAM",		0x0080, 0x8049, 6240},
+	{"I-PAL-NICAM-MONO",	0x0078, 0x8049, 6000},
+	{"D/K-PAL-A2",		0x0000, 0x8049, 6380},
+	{"D/K-PAL-NICAM",	0x0080, 0x8049, 6200},
+	{"D/K-PAL-MONO",	0x0078, 0x8049, 6500},
+	{"D/K-SECAM-A2 DK1",	0x0000, 0x8049, 6340},
+	{"D/K-SECAM-A2 L/DK3",	0x0000, 0x8049, 6000},
+	{"D/K-SECAM-A2 MONO",	0x0078, 0x8049, 6500},
+	{"D/K-SECAM-NICAM",	0x0080, 0x8049, 6200},
+	{"L-SECAM-NICAM",	0x8080, 0x0009, 6200},
+	{"L'-SECAM-NICAM",	0x8080, 0x4009, 6200},
+	{"DTV6",		0x00C0, 0x8002,    0},
+	{"DTV8",		0x00C0, 0x800B,    0},
+	{"DTV7/8",		0x00C0, 0x801B,    0},
+	{"DTV7",		0x00C0, 0x8007,    0},
+	{"FM Radio-INPUT2",	0x0008, 0x9800, 10700},
+	{"FM Radio-INPUT1",	0x0008, 0x9000, 10700}
+};
+
+static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val);
+static int xc4000_tuner_reset(struct dvb_frontend *fe);
+static void xc_debug_dump(struct xc4000_priv *priv);
+
+static int xc_send_i2c_data(struct xc4000_priv *priv, u8 *buf, int len)
+{
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
+			       .flags = 0, .buf = buf, .len = len };
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
+		if (priv->ignore_i2c_write_errors == 0) {
+			printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n",
+			       len);
+			if (len == 4) {
+				printk(KERN_ERR "bytes %02x %02x %02x %02x\n", buf[0],
+				       buf[1], buf[2], buf[3]);
+			}
+			return -EREMOTEIO;
+		}
+	}
+	return 0;
+}
+
+static int xc4000_tuner_reset(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int ret;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (fe->callback) {
+		ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
+					   fe->dvb->priv :
+					   priv->i2c_props.adap->algo_data,
+					   DVB_FRONTEND_COMPONENT_TUNER,
+					   XC4000_TUNER_RESET, 0);
+		if (ret) {
+			printk(KERN_ERR "xc4000: reset failed\n");
+			return -EREMOTEIO;
+		}
+	} else {
+		printk(KERN_ERR "xc4000: no tuner reset callback function, "
+				"fatal\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int xc_write_reg(struct xc4000_priv *priv, u16 regAddr, u16 i2cData)
+{
+	u8 buf[4];
+	int result;
+
+	buf[0] = (regAddr >> 8) & 0xFF;
+	buf[1] = regAddr & 0xFF;
+	buf[2] = (i2cData >> 8) & 0xFF;
+	buf[3] = i2cData & 0xFF;
+	result = xc_send_i2c_data(priv, buf, 4);
+
+	return result;
+}
+
+static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+
+	int i, nbytes_to_send, result;
+	unsigned int len, pos, index;
+	u8 buf[XC_MAX_I2C_WRITE_LENGTH];
+
+	index = 0;
+	while ((i2c_sequence[index] != 0xFF) ||
+		(i2c_sequence[index + 1] != 0xFF)) {
+		len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
+		if (len == 0x0000) {
+			/* RESET command */
+			/* NOTE: this is ignored, as the reset callback was */
+			/* already called by check_firmware() */
+			index += 2;
+		} else if (len & 0x8000) {
+			/* WAIT command */
+			msleep(len & 0x7FFF);
+			index += 2;
+		} else {
+			/* Send i2c data whilst ensuring individual transactions
+			 * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
+			 */
+			index += 2;
+			buf[0] = i2c_sequence[index];
+			buf[1] = i2c_sequence[index + 1];
+			pos = 2;
+			while (pos < len) {
+				if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
+					nbytes_to_send =
+						XC_MAX_I2C_WRITE_LENGTH;
+				else
+					nbytes_to_send = (len - pos + 2);
+				for (i = 2; i < nbytes_to_send; i++) {
+					buf[i] = i2c_sequence[index + pos +
+						i - 2];
+				}
+				result = xc_send_i2c_data(priv, buf,
+					nbytes_to_send);
+
+				if (result != 0)
+					return result;
+
+				pos += nbytes_to_send - 2;
+			}
+			index += len;
+		}
+	}
+	return 0;
+}
+
+static int xc_set_tv_standard(struct xc4000_priv *priv,
+	u16 video_mode, u16 audio_mode)
+{
+	int ret;
+	dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, video_mode, audio_mode);
+	dprintk(1, "%s() Standard = %s\n",
+		__func__,
+		xc4000_standard[priv->video_standard].Name);
+
+	/* Don't complain when the request fails because of i2c stretching */
+	priv->ignore_i2c_write_errors = 1;
+
+	ret = xc_write_reg(priv, XREG_VIDEO_MODE, video_mode);
+	if (ret == 0)
+		ret = xc_write_reg(priv, XREG_AUDIO_MODE, audio_mode);
+
+	priv->ignore_i2c_write_errors = 0;
+
+	return ret;
+}
+
+static int xc_set_signal_source(struct xc4000_priv *priv, u16 rf_mode)
+{
+	dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
+		rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
+
+	if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
+		rf_mode = XC_RF_MODE_CABLE;
+		printk(KERN_ERR
+			"%s(), Invalid mode, defaulting to CABLE",
+			__func__);
+	}
+	return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
+}
+
+static const struct dvb_tuner_ops xc4000_tuner_ops;
+
+static int xc_set_rf_frequency(struct xc4000_priv *priv, u32 freq_hz)
+{
+	u16 freq_code;
+
+	dprintk(1, "%s(%u)\n", __func__, freq_hz);
+
+	if ((freq_hz > xc4000_tuner_ops.info.frequency_max) ||
+	    (freq_hz < xc4000_tuner_ops.info.frequency_min))
+		return -EINVAL;
+
+	freq_code = (u16)(freq_hz / 15625);
+
+	/* WAS: Starting in firmware version 1.1.44, Xceive recommends using the
+	   FINERFREQ for all normal tuning (the doc indicates reg 0x03 should
+	   only be used for fast scanning for channel lock) */
+	/* WAS: XREG_FINERFREQ */
+	return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
+}
+
+static int xc_get_adc_envelope(struct xc4000_priv *priv, u16 *adc_envelope)
+{
+	return xc4000_readreg(priv, XREG_ADC_ENV, adc_envelope);
+}
+
+static int xc_get_frequency_error(struct xc4000_priv *priv, u32 *freq_error_hz)
+{
+	int result;
+	u16 regData;
+	u32 tmp;
+
+	result = xc4000_readreg(priv, XREG_FREQ_ERROR, &regData);
+	if (result != 0)
+		return result;
+
+	tmp = (u32)regData & 0xFFFFU;
+	tmp = (tmp < 0x8000U ? tmp : 0x10000U - tmp);
+	(*freq_error_hz) = tmp * 15625;
+	return result;
+}
+
+static int xc_get_lock_status(struct xc4000_priv *priv, u16 *lock_status)
+{
+	return xc4000_readreg(priv, XREG_LOCK, lock_status);
+}
+
+static int xc_get_version(struct xc4000_priv *priv,
+	u8 *hw_majorversion, u8 *hw_minorversion,
+	u8 *fw_majorversion, u8 *fw_minorversion)
+{
+	u16 data;
+	int result;
+
+	result = xc4000_readreg(priv, XREG_VERSION, &data);
+	if (result != 0)
+		return result;
+
+	(*hw_majorversion) = (data >> 12) & 0x0F;
+	(*hw_minorversion) = (data >>  8) & 0x0F;
+	(*fw_majorversion) = (data >>  4) & 0x0F;
+	(*fw_minorversion) = data & 0x0F;
+
+	return 0;
+}
+
+static int xc_get_hsync_freq(struct xc4000_priv *priv, u32 *hsync_freq_hz)
+{
+	u16 regData;
+	int result;
+
+	result = xc4000_readreg(priv, XREG_HSYNC_FREQ, &regData);
+	if (result != 0)
+		return result;
+
+	(*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
+	return result;
+}
+
+static int xc_get_frame_lines(struct xc4000_priv *priv, u16 *frame_lines)
+{
+	return xc4000_readreg(priv, XREG_FRAME_LINES, frame_lines);
+}
+
+static int xc_get_quality(struct xc4000_priv *priv, u16 *quality)
+{
+	return xc4000_readreg(priv, XREG_QUALITY, quality);
+}
+
+static u16 xc_wait_for_lock(struct xc4000_priv *priv)
+{
+	u16	lock_state = 0;
+	int	watchdog_count = 40;
+
+	while ((lock_state == 0) && (watchdog_count > 0)) {
+		xc_get_lock_status(priv, &lock_state);
+		if (lock_state != 1) {
+			msleep(5);
+			watchdog_count--;
+		}
+	}
+	return lock_state;
+}
+
+static int xc_tune_channel(struct xc4000_priv *priv, u32 freq_hz)
+{
+	int	found = 1;
+	int	result;
+
+	dprintk(1, "%s(%u)\n", __func__, freq_hz);
+
+	/* Don't complain when the request fails because of i2c stretching */
+	priv->ignore_i2c_write_errors = 1;
+	result = xc_set_rf_frequency(priv, freq_hz);
+	priv->ignore_i2c_write_errors = 0;
+
+	if (result != 0)
+		return 0;
+
+	/* wait for lock only in analog TV mode */
+	if ((priv->cur_fw.type & (FM | DTV6 | DTV7 | DTV78 | DTV8)) == 0) {
+		if (xc_wait_for_lock(priv) != 1)
+			found = 0;
+	}
+
+	/* Wait for stats to stabilize.
+	 * Frame Lines needs two frame times after initial lock
+	 * before it is valid.
+	 */
+	msleep(debug ? 100 : 10);
+
+	if (debug)
+		xc_debug_dump(priv);
+
+	return found;
+}
+
+static int xc4000_readreg(struct xc4000_priv *priv, u16 reg, u16 *val)
+{
+	u8 buf[2] = { reg >> 8, reg & 0xff };
+	u8 bval[2] = { 0, 0 };
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->i2c_props.addr,
+			.flags = 0, .buf = &buf[0], .len = 2 },
+		{ .addr = priv->i2c_props.addr,
+			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
+	};
+
+	if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
+		printk(KERN_ERR "xc4000: I2C read failed\n");
+		return -EREMOTEIO;
+	}
+
+	*val = (bval[0] << 8) | bval[1];
+	return 0;
+}
+
+#define dump_firm_type(t)	dump_firm_type_and_int_freq(t, 0)
+static void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq)
+{
+	 if (type & BASE)
+		printk(KERN_CONT "BASE ");
+	 if (type & INIT1)
+		printk(KERN_CONT "INIT1 ");
+	 if (type & F8MHZ)
+		printk(KERN_CONT "F8MHZ ");
+	 if (type & MTS)
+		printk(KERN_CONT "MTS ");
+	 if (type & D2620)
+		printk(KERN_CONT "D2620 ");
+	 if (type & D2633)
+		printk(KERN_CONT "D2633 ");
+	 if (type & DTV6)
+		printk(KERN_CONT "DTV6 ");
+	 if (type & QAM)
+		printk(KERN_CONT "QAM ");
+	 if (type & DTV7)
+		printk(KERN_CONT "DTV7 ");
+	 if (type & DTV78)
+		printk(KERN_CONT "DTV78 ");
+	 if (type & DTV8)
+		printk(KERN_CONT "DTV8 ");
+	 if (type & FM)
+		printk(KERN_CONT "FM ");
+	 if (type & INPUT1)
+		printk(KERN_CONT "INPUT1 ");
+	 if (type & LCD)
+		printk(KERN_CONT "LCD ");
+	 if (type & NOGD)
+		printk(KERN_CONT "NOGD ");
+	 if (type & MONO)
+		printk(KERN_CONT "MONO ");
+	 if (type & ATSC)
+		printk(KERN_CONT "ATSC ");
+	 if (type & IF)
+		printk(KERN_CONT "IF ");
+	 if (type & LG60)
+		printk(KERN_CONT "LG60 ");
+	 if (type & ATI638)
+		printk(KERN_CONT "ATI638 ");
+	 if (type & OREN538)
+		printk(KERN_CONT "OREN538 ");
+	 if (type & OREN36)
+		printk(KERN_CONT "OREN36 ");
+	 if (type & TOYOTA388)
+		printk(KERN_CONT "TOYOTA388 ");
+	 if (type & TOYOTA794)
+		printk(KERN_CONT "TOYOTA794 ");
+	 if (type & DIBCOM52)
+		printk(KERN_CONT "DIBCOM52 ");
+	 if (type & ZARLINK456)
+		printk(KERN_CONT "ZARLINK456 ");
+	 if (type & CHINA)
+		printk(KERN_CONT "CHINA ");
+	 if (type & F6MHZ)
+		printk(KERN_CONT "F6MHZ ");
+	 if (type & INPUT2)
+		printk(KERN_CONT "INPUT2 ");
+	 if (type & SCODE)
+		printk(KERN_CONT "SCODE ");
+	 if (type & HAS_IF)
+		printk(KERN_CONT "HAS_IF_%d ", int_freq);
+}
+
+static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
+			 v4l2_std_id *id)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int		i, best_i = -1;
+	unsigned int	best_nr_diffs = 255U;
+
+	if (!priv->firm) {
+		printk(KERN_ERR "Error! firmware not loaded\n");
+		return -EINVAL;
+	}
+
+	if (((type & ~SCODE) == 0) && (*id == 0))
+		*id = V4L2_STD_PAL;
+
+	/* Seek for generic video standard match */
+	for (i = 0; i < priv->firm_size; i++) {
+		v4l2_std_id	id_diff_mask =
+			(priv->firm[i].id ^ (*id)) & (*id);
+		unsigned int	type_diff_mask =
+			(priv->firm[i].type ^ type)
+			& (BASE_TYPES | DTV_TYPES | LCD | NOGD | MONO | SCODE);
+		unsigned int	nr_diffs;
+
+		if (type_diff_mask
+		    & (BASE | INIT1 | FM | DTV6 | DTV7 | DTV78 | DTV8 | SCODE))
+			continue;
+
+		nr_diffs = hweight64(id_diff_mask) + hweight32(type_diff_mask);
+		if (!nr_diffs)	/* Supports all the requested standards */
+			goto found;
+
+		if (nr_diffs < best_nr_diffs) {
+			best_nr_diffs = nr_diffs;
+			best_i = i;
+		}
+	}
+
+	/* FIXME: Would make sense to seek for type "hint" match ? */
+	if (best_i < 0) {
+		i = -ENOENT;
+		goto ret;
+	}
+
+	if (best_nr_diffs > 0U) {
+		printk(KERN_WARNING
+		       "Selecting best matching firmware (%u bits differ) for "
+		       "type=(%x), id %016llx:\n",
+		       best_nr_diffs, type, (unsigned long long)*id);
+		i = best_i;
+	}
+
+found:
+	*id = priv->firm[i].id;
+
+ret:
+	if (debug) {
+		printk(KERN_DEBUG "%s firmware for type=",
+		       (i < 0) ? "Can't find" : "Found");
+		dump_firm_type(type);
+		printk(KERN_DEBUG "(%x), id %016llx.\n", type, (unsigned long long)*id);
+	}
+	return i;
+}
+
+static int load_firmware(struct dvb_frontend *fe, unsigned int type,
+			 v4l2_std_id *id)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int                pos, rc;
+	unsigned char      *p;
+
+	pos = seek_firmware(fe, type, id);
+	if (pos < 0)
+		return pos;
+
+	p = priv->firm[pos].ptr;
+
+	/* Don't complain when the request fails because of i2c stretching */
+	priv->ignore_i2c_write_errors = 1;
+
+	rc = xc_load_i2c_sequence(fe, p);
+
+	priv->ignore_i2c_write_errors = 0;
+
+	return rc;
+}
+
+static int xc4000_fwupload(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	const struct firmware *fw   = NULL;
+	const unsigned char   *p, *endp;
+	int                   rc = 0;
+	int		      n, n_array;
+	char		      name[33];
+	const char	      *fname;
+
+	if (firmware_name[0] != '\0')
+		fname = firmware_name;
+	else
+		fname = XC4000_DEFAULT_FIRMWARE;
+
+	dprintk(1, "Reading firmware %s\n", fname);
+	rc = request_firmware(&fw, fname, priv->i2c_props.adap->dev.parent);
+	if (rc < 0) {
+		if (rc == -ENOENT)
+			printk(KERN_ERR "Error: firmware %s not found.\n", fname);
+		else
+			printk(KERN_ERR "Error %d while requesting firmware %s\n",
+			       rc, fname);
+
+		return rc;
+	}
+	p = fw->data;
+	endp = p + fw->size;
+
+	if (fw->size < sizeof(name) - 1 + 2 + 2) {
+		printk(KERN_ERR "Error: firmware file %s has invalid size!\n",
+		       fname);
+		goto corrupt;
+	}
+
+	memcpy(name, p, sizeof(name) - 1);
+	name[sizeof(name) - 1] = '\0';
+	p += sizeof(name) - 1;
+
+	priv->firm_version = get_unaligned_le16(p);
+	p += 2;
+
+	n_array = get_unaligned_le16(p);
+	p += 2;
+
+	dprintk(1, "Loading %d firmware images from %s, type: %s, ver %d.%d\n",
+		n_array, fname, name,
+		priv->firm_version >> 8, priv->firm_version & 0xff);
+
+	priv->firm = kzalloc(sizeof(*priv->firm) * n_array, GFP_KERNEL);
+	if (priv->firm == NULL) {
+		printk(KERN_ERR "Not enough memory to load firmware file.\n");
+		rc = -ENOMEM;
+		goto done;
+	}
+	priv->firm_size = n_array;
+
+	n = -1;
+	while (p < endp) {
+		__u32 type, size;
+		v4l2_std_id id;
+		__u16 int_freq = 0;
+
+		n++;
+		if (n >= n_array) {
+			printk(KERN_ERR "More firmware images in file than "
+			       "were expected!\n");
+			goto corrupt;
+		}
+
+		/* Checks if there's enough bytes to read */
+		if (endp - p < sizeof(type) + sizeof(id) + sizeof(size))
+			goto header;
+
+		type = get_unaligned_le32(p);
+		p += sizeof(type);
+
+		id = get_unaligned_le64(p);
+		p += sizeof(id);
+
+		if (type & HAS_IF) {
+			int_freq = get_unaligned_le16(p);
+			p += sizeof(int_freq);
+			if (endp - p < sizeof(size))
+				goto header;
+		}
+
+		size = get_unaligned_le32(p);
+		p += sizeof(size);
+
+		if (!size || size > endp - p) {
+			printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%d, expected %d)\n",
+			       type, (unsigned long long)id,
+			       (unsigned)(endp - p), size);
+			goto corrupt;
+		}
+
+		priv->firm[n].ptr = kzalloc(size, GFP_KERNEL);
+		if (priv->firm[n].ptr == NULL) {
+			printk(KERN_ERR "Not enough memory to load firmware file.\n");
+			rc = -ENOMEM;
+			goto done;
+		}
+
+		if (debug) {
+			printk(KERN_DEBUG "Reading firmware type ");
+			dump_firm_type_and_int_freq(type, int_freq);
+			printk(KERN_DEBUG "(%x), id %llx, size=%d.\n",
+			       type, (unsigned long long)id, size);
+		}
+
+		memcpy(priv->firm[n].ptr, p, size);
+		priv->firm[n].type = type;
+		priv->firm[n].id   = id;
+		priv->firm[n].size = size;
+		priv->firm[n].int_freq = int_freq;
+
+		p += size;
+	}
+
+	if (n + 1 != priv->firm_size) {
+		printk(KERN_ERR "Firmware file is incomplete!\n");
+		goto corrupt;
+	}
+
+	goto done;
+
+header:
+	printk(KERN_ERR "Firmware header is incomplete!\n");
+corrupt:
+	rc = -EINVAL;
+	printk(KERN_ERR "Error: firmware file is corrupted!\n");
+
+done:
+	release_firmware(fw);
+	if (rc == 0)
+		dprintk(1, "Firmware files loaded.\n");
+
+	return rc;
+}
+
+static int load_scode(struct dvb_frontend *fe, unsigned int type,
+			 v4l2_std_id *id, __u16 int_freq, int scode)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int		pos, rc;
+	unsigned char	*p;
+	u8		scode_buf[13];
+	u8		indirect_mode[5];
+
+	dprintk(1, "%s called int_freq=%d\n", __func__, int_freq);
+
+	if (!int_freq) {
+		pos = seek_firmware(fe, type, id);
+		if (pos < 0)
+			return pos;
+	} else {
+		for (pos = 0; pos < priv->firm_size; pos++) {
+			if ((priv->firm[pos].int_freq == int_freq) &&
+			    (priv->firm[pos].type & HAS_IF))
+				break;
+		}
+		if (pos == priv->firm_size)
+			return -ENOENT;
+	}
+
+	p = priv->firm[pos].ptr;
+
+	if (priv->firm[pos].size != 12 * 16 || scode >= 16)
+		return -EINVAL;
+	p += 12 * scode;
+
+	if (debug) {
+		tuner_info("Loading SCODE for type=");
+		dump_firm_type_and_int_freq(priv->firm[pos].type,
+					    priv->firm[pos].int_freq);
+		printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type,
+		       (unsigned long long)*id);
+	}
+
+	scode_buf[0] = 0x00;
+	memcpy(&scode_buf[1], p, 12);
+
+	/* Enter direct-mode */
+	rc = xc_write_reg(priv, XREG_DIRECTSITTING_MODE, 0);
+	if (rc < 0) {
+		printk(KERN_ERR "failed to put device into direct mode!\n");
+		return -EIO;
+	}
+
+	rc = xc_send_i2c_data(priv, scode_buf, 13);
+	if (rc != 0) {
+		/* Even if the send failed, make sure we set back to indirect
+		   mode */
+		printk(KERN_ERR "Failed to set scode %d\n", rc);
+	}
+
+	/* Switch back to indirect-mode */
+	memset(indirect_mode, 0, sizeof(indirect_mode));
+	indirect_mode[4] = 0x88;
+	xc_send_i2c_data(priv, indirect_mode, sizeof(indirect_mode));
+	msleep(10);
+
+	return 0;
+}
+
+static int check_firmware(struct dvb_frontend *fe, unsigned int type,
+			  v4l2_std_id std, __u16 int_freq)
+{
+	struct xc4000_priv         *priv = fe->tuner_priv;
+	struct firmware_properties new_fw;
+	int			   rc = 0, is_retry = 0;
+	u16			   hwmodel;
+	v4l2_std_id		   std0;
+	u8			   hw_major, hw_minor, fw_major, fw_minor;
+
+	dprintk(1, "%s called\n", __func__);
+
+	if (!priv->firm) {
+		rc = xc4000_fwupload(fe);
+		if (rc < 0)
+			return rc;
+	}
+
+retry:
+	new_fw.type = type;
+	new_fw.id = std;
+	new_fw.std_req = std;
+	new_fw.scode_table = SCODE;
+	new_fw.scode_nr = 0;
+	new_fw.int_freq = int_freq;
+
+	dprintk(1, "checking firmware, user requested type=");
+	if (debug) {
+		dump_firm_type(new_fw.type);
+		printk(KERN_CONT "(%x), id %016llx, ", new_fw.type,
+		       (unsigned long long)new_fw.std_req);
+		if (!int_freq)
+			printk(KERN_CONT "scode_tbl ");
+		else
+			printk(KERN_CONT "int_freq %d, ", new_fw.int_freq);
+		printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr);
+	}
+
+	/* No need to reload base firmware if it matches */
+	if (priv->cur_fw.type & BASE) {
+		dprintk(1, "BASE firmware not changed.\n");
+		goto skip_base;
+	}
+
+	/* Updating BASE - forget about all currently loaded firmware */
+	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+
+	/* Reset is needed before loading firmware */
+	rc = xc4000_tuner_reset(fe);
+	if (rc < 0)
+		goto fail;
+
+	/* BASE firmwares are all std0 */
+	std0 = 0;
+	rc = load_firmware(fe, BASE, &std0);
+	if (rc < 0) {
+		printk(KERN_ERR "Error %d while loading base firmware\n", rc);
+		goto fail;
+	}
+
+	/* Load INIT1, if needed */
+	dprintk(1, "Load init1 firmware, if exists\n");
+
+	rc = load_firmware(fe, BASE | INIT1, &std0);
+	if (rc == -ENOENT)
+		rc = load_firmware(fe, BASE | INIT1, &std0);
+	if (rc < 0 && rc != -ENOENT) {
+		tuner_err("Error %d while loading init1 firmware\n",
+			  rc);
+		goto fail;
+	}
+
+skip_base:
+	/*
+	 * No need to reload standard specific firmware if base firmware
+	 * was not reloaded and requested video standards have not changed.
+	 */
+	if (priv->cur_fw.type == (BASE | new_fw.type) &&
+	    priv->cur_fw.std_req == std) {
+		dprintk(1, "Std-specific firmware already loaded.\n");
+		goto skip_std_specific;
+	}
+
+	/* Reloading std-specific firmware forces a SCODE update */
+	priv->cur_fw.scode_table = 0;
+
+	/* Load the standard firmware */
+	rc = load_firmware(fe, new_fw.type, &new_fw.id);
+
+	if (rc < 0)
+		goto fail;
+
+skip_std_specific:
+	if (priv->cur_fw.scode_table == new_fw.scode_table &&
+	    priv->cur_fw.scode_nr == new_fw.scode_nr) {
+		dprintk(1, "SCODE firmware already loaded.\n");
+		goto check_device;
+	}
+
+	/* Load SCODE firmware, if exists */
+	rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id,
+			new_fw.int_freq, new_fw.scode_nr);
+	if (rc != 0)
+		dprintk(1, "load scode failed %d\n", rc);
+
+check_device:
+	rc = xc4000_readreg(priv, XREG_PRODUCT_ID, &hwmodel);
+
+	if (xc_get_version(priv, &hw_major, &hw_minor, &fw_major,
+			   &fw_minor) != 0) {
+		printk(KERN_ERR "Unable to read tuner registers.\n");
+		goto fail;
+	}
+
+	dprintk(1, "Device is Xceive %d version %d.%d, "
+		"firmware version %d.%d\n",
+		hwmodel, hw_major, hw_minor, fw_major, fw_minor);
+
+	/* Check firmware version against what we downloaded. */
+	if (priv->firm_version != ((fw_major << 8) | fw_minor)) {
+		printk(KERN_WARNING
+		       "Incorrect readback of firmware version %d.%d.\n",
+		       fw_major, fw_minor);
+		goto fail;
+	}
+
+	/* Check that the tuner hardware model remains consistent over time. */
+	if (priv->hwmodel == 0 &&
+	    (hwmodel == XC_PRODUCT_ID_XC4000 ||
+	     hwmodel == XC_PRODUCT_ID_XC4100)) {
+		priv->hwmodel = hwmodel;
+		priv->hwvers = (hw_major << 8) | hw_minor;
+	} else if (priv->hwmodel == 0 || priv->hwmodel != hwmodel ||
+		   priv->hwvers != ((hw_major << 8) | hw_minor)) {
+		printk(KERN_WARNING
+		       "Read invalid device hardware information - tuner "
+		       "hung?\n");
+		goto fail;
+	}
+
+	memcpy(&priv->cur_fw, &new_fw, sizeof(priv->cur_fw));
+
+	/*
+	 * By setting BASE in cur_fw.type only after successfully loading all
+	 * firmwares, we can:
+	 * 1. Identify that BASE firmware with type=0 has been loaded;
+	 * 2. Tell whether BASE firmware was just changed the next time through.
+	 */
+	priv->cur_fw.type |= BASE;
+
+	return 0;
+
+fail:
+	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+	if (!is_retry) {
+		msleep(50);
+		is_retry = 1;
+		dprintk(1, "Retrying firmware load\n");
+		goto retry;
+	}
+
+	if (rc == -ENOENT)
+		rc = -EINVAL;
+	return rc;
+}
+
+static void xc_debug_dump(struct xc4000_priv *priv)
+{
+	u16	adc_envelope;
+	u32	freq_error_hz = 0;
+	u16	lock_status;
+	u32	hsync_freq_hz = 0;
+	u16	frame_lines;
+	u16	quality;
+	u8	hw_majorversion = 0, hw_minorversion = 0;
+	u8	fw_majorversion = 0, fw_minorversion = 0;
+
+	xc_get_adc_envelope(priv, &adc_envelope);
+	dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
+
+	xc_get_frequency_error(priv, &freq_error_hz);
+	dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
+
+	xc_get_lock_status(priv, &lock_status);
+	dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
+		lock_status);
+
+	xc_get_version(priv, &hw_majorversion, &hw_minorversion,
+		       &fw_majorversion, &fw_minorversion);
+	dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
+		hw_majorversion, hw_minorversion,
+		fw_majorversion, fw_minorversion);
+
+	if (priv->video_standard < XC4000_DTV6) {
+		xc_get_hsync_freq(priv, &hsync_freq_hz);
+		dprintk(1, "*** Horizontal sync frequency = %d Hz\n",
+			hsync_freq_hz);
+
+		xc_get_frame_lines(priv, &frame_lines);
+		dprintk(1, "*** Frame lines = %d\n", frame_lines);
+	}
+
+	xc_get_quality(priv, &quality);
+	dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
+}
+
+static int xc4000_set_params(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	unsigned int type;
+	int	ret = -EREMOTEIO;
+
+	dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
+
+	mutex_lock(&priv->lock);
+
+	if (fe->ops.info.type == FE_ATSC) {
+		dprintk(1, "%s() ATSC\n", __func__);
+		switch (params->u.vsb.modulation) {
+		case VSB_8:
+		case VSB_16:
+			dprintk(1, "%s() VSB modulation\n", __func__);
+			priv->rf_mode = XC_RF_MODE_AIR;
+			priv->freq_hz = params->frequency - 1750000;
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = XC4000_DTV6;
+			type = DTV6;
+			break;
+		case QAM_64:
+		case QAM_256:
+		case QAM_AUTO:
+			dprintk(1, "%s() QAM modulation\n", __func__);
+			priv->rf_mode = XC_RF_MODE_CABLE;
+			priv->freq_hz = params->frequency - 1750000;
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = XC4000_DTV6;
+			type = DTV6;
+			break;
+		default:
+			ret = -EINVAL;
+			goto fail;
+		}
+	} else if (fe->ops.info.type == FE_OFDM) {
+		dprintk(1, "%s() OFDM\n", __func__);
+		switch (params->u.ofdm.bandwidth) {
+		case BANDWIDTH_6_MHZ:
+			priv->bandwidth = BANDWIDTH_6_MHZ;
+			priv->video_standard = XC4000_DTV6;
+			priv->freq_hz = params->frequency - 1750000;
+			type = DTV6;
+			break;
+		case BANDWIDTH_7_MHZ:
+			priv->bandwidth = BANDWIDTH_7_MHZ;
+			priv->video_standard = XC4000_DTV7;
+			priv->freq_hz = params->frequency - 2250000;
+			type = DTV7;
+			break;
+		case BANDWIDTH_8_MHZ:
+			priv->bandwidth = BANDWIDTH_8_MHZ;
+			priv->video_standard = XC4000_DTV8;
+			priv->freq_hz = params->frequency - 2750000;
+			type = DTV8;
+			break;
+		case BANDWIDTH_AUTO:
+			if (params->frequency < 400000000) {
+				priv->bandwidth = BANDWIDTH_7_MHZ;
+				priv->freq_hz = params->frequency - 2250000;
+			} else {
+				priv->bandwidth = BANDWIDTH_8_MHZ;
+				priv->freq_hz = params->frequency - 2750000;
+			}
+			priv->video_standard = XC4000_DTV7_8;
+			type = DTV78;
+			break;
+		default:
+			printk(KERN_ERR "xc4000 bandwidth not set!\n");
+			ret = -EINVAL;
+			goto fail;
+		}
+		priv->rf_mode = XC_RF_MODE_AIR;
+	} else {
+		printk(KERN_ERR "xc4000 modulation type not supported!\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	dprintk(1, "%s() frequency=%d (compensated)\n",
+		__func__, priv->freq_hz);
+
+	/* Make sure the correct firmware type is loaded */
+	if (check_firmware(fe, type, 0, priv->if_khz) != 0)
+		goto fail;
+
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n",
+		       priv->rf_mode);
+		goto fail;
+	} else {
+		u16	video_mode, audio_mode;
+		video_mode = xc4000_standard[priv->video_standard].video_mode;
+		audio_mode = xc4000_standard[priv->video_standard].audio_mode;
+		if (type == DTV6 && priv->firm_version != 0x0102)
+			video_mode |= 0x0001;
+		ret = xc_set_tv_standard(priv, video_mode, audio_mode);
+		if (ret != 0) {
+			printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
+			/* DJH - do not return when it fails... */
+			/* goto fail; */
+		}
+	}
+
+	if (xc_write_reg(priv, XREG_D_CODE, 0) == 0)
+		ret = 0;
+	if (priv->dvb_amplitude != 0) {
+		if (xc_write_reg(priv, XREG_AMPLITUDE,
+				 (priv->firm_version != 0x0102 ||
+				  priv->dvb_amplitude != 134 ?
+				  priv->dvb_amplitude : 132)) != 0)
+			ret = -EREMOTEIO;
+	}
+	if (priv->set_smoothedcvbs != 0) {
+		if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0)
+			ret = -EREMOTEIO;
+	}
+	if (ret != 0) {
+		printk(KERN_ERR "xc4000: setting registers failed\n");
+		/* goto fail; */
+	}
+
+	xc_tune_channel(priv, priv->freq_hz);
+
+	ret = 0;
+
+fail:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int xc4000_set_analog_params(struct dvb_frontend *fe,
+	struct analog_parameters *params)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	unsigned int type = 0;
+	int	ret = -EREMOTEIO;
+
+	if (params->mode == V4L2_TUNER_RADIO) {
+		dprintk(1, "%s() frequency=%d (in units of 62.5Hz)\n",
+			__func__, params->frequency);
+
+		mutex_lock(&priv->lock);
+
+		params->std = 0;
+		priv->freq_hz = params->frequency * 125L / 2;
+
+		if (audio_std & XC4000_AUDIO_STD_INPUT1) {
+			priv->video_standard = XC4000_FM_Radio_INPUT1;
+			type = FM | INPUT1;
+		} else {
+			priv->video_standard = XC4000_FM_Radio_INPUT2;
+			type = FM | INPUT2;
+		}
+
+		goto tune_channel;
+	}
+
+	dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
+		__func__, params->frequency);
+
+	mutex_lock(&priv->lock);
+
+	/* params->frequency is in units of 62.5khz */
+	priv->freq_hz = params->frequency * 62500;
+
+	params->std &= V4L2_STD_ALL;
+	/* if std is not defined, choose one */
+	if (!params->std)
+		params->std = V4L2_STD_PAL_BG;
+
+	if (audio_std & XC4000_AUDIO_STD_MONO)
+		type = MONO;
+
+	if (params->std & V4L2_STD_MN) {
+		params->std = V4L2_STD_MN;
+		if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_MN_NTSC_PAL_Mono;
+		} else if (audio_std & XC4000_AUDIO_STD_A2) {
+			params->std |= V4L2_STD_A2;
+			priv->video_standard = XC4000_MN_NTSC_PAL_A2;
+		} else {
+			params->std |= V4L2_STD_BTSC;
+			priv->video_standard = XC4000_MN_NTSC_PAL_BTSC;
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_PAL_BG) {
+		params->std = V4L2_STD_PAL_BG;
+		if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_BG_PAL_MONO;
+		} else if (!(audio_std & XC4000_AUDIO_STD_A2)) {
+			if (!(audio_std & XC4000_AUDIO_STD_B)) {
+				params->std |= V4L2_STD_NICAM_A;
+				priv->video_standard = XC4000_BG_PAL_NICAM;
+			} else {
+				params->std |= V4L2_STD_NICAM_B;
+				priv->video_standard = XC4000_BG_PAL_NICAM;
+			}
+		} else {
+			if (!(audio_std & XC4000_AUDIO_STD_B)) {
+				params->std |= V4L2_STD_A2_A;
+				priv->video_standard = XC4000_BG_PAL_A2;
+			} else {
+				params->std |= V4L2_STD_A2_B;
+				priv->video_standard = XC4000_BG_PAL_A2;
+			}
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_PAL_I) {
+		/* default to NICAM audio standard */
+		params->std = V4L2_STD_PAL_I | V4L2_STD_NICAM;
+		if (audio_std & XC4000_AUDIO_STD_MONO)
+			priv->video_standard = XC4000_I_PAL_NICAM_MONO;
+		else
+			priv->video_standard = XC4000_I_PAL_NICAM;
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_PAL_DK) {
+		params->std = V4L2_STD_PAL_DK;
+		if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_DK_PAL_MONO;
+		} else if (audio_std & XC4000_AUDIO_STD_A2) {
+			params->std |= V4L2_STD_A2;
+			priv->video_standard = XC4000_DK_PAL_A2;
+		} else {
+			params->std |= V4L2_STD_NICAM;
+			priv->video_standard = XC4000_DK_PAL_NICAM;
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_SECAM_DK) {
+		/* default to A2 audio standard */
+		params->std = V4L2_STD_SECAM_DK | V4L2_STD_A2;
+		if (audio_std & XC4000_AUDIO_STD_L) {
+			type = 0;
+			priv->video_standard = XC4000_DK_SECAM_NICAM;
+		} else if (audio_std & XC4000_AUDIO_STD_MONO) {
+			priv->video_standard = XC4000_DK_SECAM_A2MONO;
+		} else if (audio_std & XC4000_AUDIO_STD_K3) {
+			params->std |= V4L2_STD_SECAM_K3;
+			priv->video_standard = XC4000_DK_SECAM_A2LDK3;
+		} else {
+			priv->video_standard = XC4000_DK_SECAM_A2DK1;
+		}
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_SECAM_L) {
+		/* default to NICAM audio standard */
+		type = 0;
+		params->std = V4L2_STD_SECAM_L | V4L2_STD_NICAM;
+		priv->video_standard = XC4000_L_SECAM_NICAM;
+		goto tune_channel;
+	}
+
+	if (params->std & V4L2_STD_SECAM_LC) {
+		/* default to NICAM audio standard */
+		type = 0;
+		params->std = V4L2_STD_SECAM_LC | V4L2_STD_NICAM;
+		priv->video_standard = XC4000_LC_SECAM_NICAM;
+		goto tune_channel;
+	}
+
+tune_channel:
+	/* FIXME: it could be air. */
+	priv->rf_mode = XC_RF_MODE_CABLE;
+
+	if (check_firmware(fe, type, params->std,
+			   xc4000_standard[priv->video_standard].int_freq) != 0)
+		goto fail;
+
+	ret = xc_set_signal_source(priv, priv->rf_mode);
+	if (ret != 0) {
+		printk(KERN_ERR
+		       "xc4000: xc_set_signal_source(%d) failed\n",
+		       priv->rf_mode);
+		goto fail;
+	} else {
+		u16	video_mode, audio_mode;
+		video_mode = xc4000_standard[priv->video_standard].video_mode;
+		audio_mode = xc4000_standard[priv->video_standard].audio_mode;
+		if (priv->video_standard < XC4000_BG_PAL_A2) {
+			if (type & NOGD)
+				video_mode &= 0xFF7F;
+		} else if (priv->video_standard < XC4000_I_PAL_NICAM) {
+			if (priv->firm_version == 0x0102)
+				video_mode &= 0xFEFF;
+			if (audio_std & XC4000_AUDIO_STD_B)
+				video_mode |= 0x0080;
+		}
+		ret = xc_set_tv_standard(priv, video_mode, audio_mode);
+		if (ret != 0) {
+			printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
+			goto fail;
+		}
+	}
+
+	if (xc_write_reg(priv, XREG_D_CODE, 0) == 0)
+		ret = 0;
+	if (xc_write_reg(priv, XREG_AMPLITUDE, 1) != 0)
+		ret = -EREMOTEIO;
+	if (priv->set_smoothedcvbs != 0) {
+		if (xc_write_reg(priv, XREG_SMOOTHEDCVBS, 1) != 0)
+			ret = -EREMOTEIO;
+	}
+	if (ret != 0) {
+		printk(KERN_ERR "xc4000: setting registers failed\n");
+		goto fail;
+	}
+
+	xc_tune_channel(priv, priv->freq_hz);
+
+	ret = 0;
+
+fail:
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int xc4000_get_frequency(struct dvb_frontend *fe, u32 *freq)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+
+	*freq = priv->freq_hz;
+
+	if (debug) {
+		mutex_lock(&priv->lock);
+		if ((priv->cur_fw.type
+		     & (BASE | FM | DTV6 | DTV7 | DTV78 | DTV8)) == BASE) {
+			u16	snr = 0;
+			if (xc4000_readreg(priv, XREG_SNR, &snr) == 0) {
+				mutex_unlock(&priv->lock);
+				dprintk(1, "%s() freq = %u, SNR = %d\n",
+					__func__, *freq, snr);
+				return 0;
+			}
+		}
+		mutex_unlock(&priv->lock);
+	}
+
+	dprintk(1, "%s()\n", __func__);
+
+	return 0;
+}
+
+static int xc4000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	dprintk(1, "%s()\n", __func__);
+
+	*bw = priv->bandwidth;
+	return 0;
+}
+
+static int xc4000_get_status(struct dvb_frontend *fe, u32 *status)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	u16	lock_status = 0;
+
+	mutex_lock(&priv->lock);
+
+	if (priv->cur_fw.type & BASE)
+		xc_get_lock_status(priv, &lock_status);
+
+	*status = (lock_status == 1 ?
+		   TUNER_STATUS_LOCKED | TUNER_STATUS_STEREO : 0);
+	if (priv->cur_fw.type & (DTV6 | DTV7 | DTV78 | DTV8))
+		*status &= (~TUNER_STATUS_STEREO);
+
+	mutex_unlock(&priv->lock);
+
+	dprintk(2, "%s() lock_status = %d\n", __func__, lock_status);
+
+	return 0;
+}
+
+static int xc4000_sleep(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+	int	ret = 0;
+
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&priv->lock);
+
+	/* Avoid firmware reload on slow devices */
+	if ((no_poweroff == 2 ||
+	     (no_poweroff == 0 && priv->default_pm != 0)) &&
+	    (priv->cur_fw.type & BASE) != 0) {
+		/* force reset and firmware reload */
+		priv->cur_fw.type = XC_POWERED_DOWN;
+
+		if (xc_write_reg(priv, XREG_POWER_DOWN, 0) != 0) {
+			printk(KERN_ERR
+			       "xc4000: %s() unable to shutdown tuner\n",
+			       __func__);
+			ret = -EREMOTEIO;
+		}
+		msleep(20);
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int xc4000_init(struct dvb_frontend *fe)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	return 0;
+}
+
+static int xc4000_release(struct dvb_frontend *fe)
+{
+	struct xc4000_priv *priv = fe->tuner_priv;
+
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&xc4000_list_mutex);
+
+	if (priv)
+		hybrid_tuner_release_state(priv);
+
+	mutex_unlock(&xc4000_list_mutex);
+
+	fe->tuner_priv = NULL;
+
+	return 0;
+}
+
+static const struct dvb_tuner_ops xc4000_tuner_ops = {
+	.info = {
+		.name           = "Xceive XC4000",
+		.frequency_min  =    1000000,
+		.frequency_max  = 1023000000,
+		.frequency_step =      50000,
+	},
+
+	.release	   = xc4000_release,
+	.init		   = xc4000_init,
+	.sleep		   = xc4000_sleep,
+
+	.set_params	   = xc4000_set_params,
+	.set_analog_params = xc4000_set_analog_params,
+	.get_frequency	   = xc4000_get_frequency,
+	.get_bandwidth	   = xc4000_get_bandwidth,
+	.get_status	   = xc4000_get_status
+};
+
+struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   struct xc4000_config *cfg)
+{
+	struct xc4000_priv *priv = NULL;
+	int	instance;
+	u16	id = 0;
+
+	dprintk(1, "%s(%d-%04x)\n", __func__,
+		i2c ? i2c_adapter_id(i2c) : -1,
+		cfg ? cfg->i2c_address : -1);
+
+	mutex_lock(&xc4000_list_mutex);
+
+	instance = hybrid_tuner_request_state(struct xc4000_priv, priv,
+					      hybrid_tuner_instance_list,
+					      i2c, cfg->i2c_address, "xc4000");
+	switch (instance) {
+	case 0:
+		goto fail;
+		break;
+	case 1:
+		/* new tuner instance */
+		priv->bandwidth = BANDWIDTH_6_MHZ;
+		/* set default configuration */
+		priv->if_khz = 4560;
+		priv->default_pm = 0;
+		priv->dvb_amplitude = 134;
+		priv->set_smoothedcvbs = 1;
+		mutex_init(&priv->lock);
+		fe->tuner_priv = priv;
+		break;
+	default:
+		/* existing tuner instance */
+		fe->tuner_priv = priv;
+		break;
+	}
+
+	if (cfg->if_khz != 0) {
+		/* copy configuration if provided by the caller */
+		priv->if_khz = cfg->if_khz;
+		priv->default_pm = cfg->default_pm;
+		priv->dvb_amplitude = cfg->dvb_amplitude;
+		priv->set_smoothedcvbs = cfg->set_smoothedcvbs;
+	}
+
+	/* Check if firmware has been loaded. It is possible that another
+	   instance of the driver has loaded the firmware.
+	 */
+
+	if (instance == 1) {
+		if (xc4000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
+			goto fail;
+	} else {
+		id = ((priv->cur_fw.type & BASE) != 0 ?
+		      priv->hwmodel : XC_PRODUCT_ID_FW_NOT_LOADED);
+	}
+
+	switch (id) {
+	case XC_PRODUCT_ID_XC4000:
+	case XC_PRODUCT_ID_XC4100:
+		printk(KERN_INFO
+			"xc4000: Successfully identified at address 0x%02x\n",
+			cfg->i2c_address);
+		printk(KERN_INFO
+			"xc4000: Firmware has been loaded previously\n");
+		break;
+	case XC_PRODUCT_ID_FW_NOT_LOADED:
+		printk(KERN_INFO
+			"xc4000: Successfully identified at address 0x%02x\n",
+			cfg->i2c_address);
+		printk(KERN_INFO
+			"xc4000: Firmware has not been loaded previously\n");
+		break;
+	default:
+		printk(KERN_ERR
+			"xc4000: Device not found at addr 0x%02x (0x%x)\n",
+			cfg->i2c_address, id);
+		goto fail;
+	}
+
+	mutex_unlock(&xc4000_list_mutex);
+
+	memcpy(&fe->ops.tuner_ops, &xc4000_tuner_ops,
+		sizeof(struct dvb_tuner_ops));
+
+	if (instance == 1) {
+		int	ret;
+		mutex_lock(&priv->lock);
+		ret = xc4000_fwupload(fe);
+		mutex_unlock(&priv->lock);
+		if (ret != 0)
+			goto fail2;
+	}
+
+	return fe;
+fail:
+	mutex_unlock(&xc4000_list_mutex);
+fail2:
+	xc4000_release(fe);
+	return NULL;
+}
+EXPORT_SYMBOL(xc4000_attach);
+
+MODULE_AUTHOR("Steven Toth, Davide Ferri");
+MODULE_DESCRIPTION("Xceive xc4000 silicon tuner driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/xc4000.h b/drivers/media/common/tuners/xc4000.h
new file mode 100644
index 00000000000..e6a44d151cb
--- /dev/null
+++ b/drivers/media/common/tuners/xc4000.h
@@ -0,0 +1,67 @@
+/*
+ *  Driver for Xceive XC4000 "QAM/8VSB single chip tuner"
+ *
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __XC4000_H__
+#define __XC4000_H__
+
+#include <linux/firmware.h>
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+struct xc4000_config {
+	u8	i2c_address;
+	/* if non-zero, power management is enabled by default */
+	u8	default_pm;
+	/* value to be written to XREG_AMPLITUDE in DVB-T mode (0: no write) */
+	u8	dvb_amplitude;
+	/* if non-zero, register 0x0E is set to filter analog TV video output */
+	u8	set_smoothedcvbs;
+	/* IF for DVB-T */
+	u32	if_khz;
+};
+
+/* xc4000 callback command */
+#define XC4000_TUNER_RESET		0
+
+/* For each bridge framework, when it attaches either analog or digital,
+ * it has to store a reference back to its _core equivalent structure,
+ * so that it can service the hardware by steering gpio's etc.
+ * Each bridge implementation is different so cast devptr accordingly.
+ * The xc4000 driver cares not for this value, other than ensuring
+ * it's passed back to a bridge during tuner_callback().
+ */
+
+#if defined(CONFIG_MEDIA_TUNER_XC4000) || (defined(CONFIG_MEDIA_TUNER_XC4000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
+					  struct i2c_adapter *i2c,
+					  struct xc4000_config *cfg);
+#else
+static inline struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
+						 struct i2c_adapter *i2c,
+						 struct xc4000_config *cfg)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index ee214c3b63d..f6e40b3a44c 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -80,6 +80,10 @@ comment "Supported nGene Adapters"
 	depends on DVB_CORE && PCI && I2C
 	source "drivers/media/dvb/ngene/Kconfig"
 
+comment "Supported ddbridge ('Octopus') Adapters"
+	depends on DVB_CORE && PCI && I2C
+	source "drivers/media/dvb/ddbridge/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"
diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile
index a1a08758a6f..b2cefe637a6 100644
--- a/drivers/media/dvb/Makefile
+++ b/drivers/media/dvb/Makefile
@@ -15,6 +15,7 @@ obj-y        := dvb-core/	\
 		dm1105/		\
 		pt1/		\
 		mantis/		\
-		ngene/
+		ngene/		\
+		ddbridge/
 
 obj-$(CONFIG_DVB_FIREDTV)	+= firewire/
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 1e1106dcd06..521d6910498 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -892,7 +892,7 @@ static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 	if (!(bttv_pci_dev = bttv_get_pcidev(card->bttv_nr))) {
 		printk("dvb_bt8xx: no pci device for card %d\n", card->bttv_nr);
 		kfree(card);
-		return -EFAULT;
+		return -ENODEV;
 	}
 
 	if (!(card->bt = dvb_bt8xx_878_match(card->bttv_nr, bttv_pci_dev))) {
@@ -902,7 +902,7 @@ static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 		       "installed, try removing it.\n");
 
 		kfree(card);
-		return -EFAULT;
+		return -ENODEV;
 	}
 
 	mutex_init(&card->bt->gpio_lock);
diff --git a/drivers/media/dvb/ddbridge/Kconfig b/drivers/media/dvb/ddbridge/Kconfig
new file mode 100644
index 00000000000..d099e1a12c8
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/Kconfig
@@ -0,0 +1,18 @@
+config DVB_DDBRIDGE
+	tristate "Digital Devices bridge support"
+	depends on DVB_CORE && PCI && I2C
+	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_STV6110x if !DVB_FE_CUSTOMISE
+	select DVB_STV090x if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+	---help---
+	  Support for cards with the Digital Devices PCI express bridge:
+	  - Octopus PCIe Bridge
+	  - Octopus mini PCIe Bridge
+	  - Octopus LE
+	  - DuoFlex S2 Octopus
+	  - DuoFlex CT Octopus
+	  - cineS2(v6)
+
+	  Say Y if you own such a card and want to use it.
diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile
new file mode 100644
index 00000000000..de4fe193c3e
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for the ddbridge device driver
+#
+
+ddbridge-objs := ddbridge-core.o
+
+obj-$(CONFIG_DVB_DDBRIDGE) += ddbridge.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends/
+EXTRA_CFLAGS += -Idrivers/media/common/tuners/
+
+# For the staging CI driver cxd2099
+EXTRA_CFLAGS += -Idrivers/staging/cxd2099/
diff --git a/drivers/media/dvb/ddbridge/ddbridge-core.c b/drivers/media/dvb/ddbridge/ddbridge-core.c
new file mode 100644
index 00000000000..573d540f213
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/ddbridge-core.c
@@ -0,0 +1,1719 @@
+/*
+ * ddbridge.c: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/i2c.h>
+#include <linux/swab.h>
+#include <linux/vmalloc.h>
+#include "ddbridge.h"
+
+#include "ddbridge-regs.h"
+
+#include "tda18271c2dd.h"
+#include "stv6110x.h"
+#include "stv090x.h"
+#include "lnbh24.h"
+#include "drxk.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* MSI had problems with lost interrupts, fixed but needs testing */
+#undef CONFIG_PCI_MSI
+
+/******************************************************************************/
+
+static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = val,  .len   = 1 } };
+	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr, u8 reg, u8 *val)
+{
+	struct i2c_msg msgs[2] = {{.addr = adr,  .flags = 0,
+				   .buf  = &reg, .len   = 1 },
+				  {.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = val,  .len   = 1 } };
+	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
+			  u16 reg, u8 *val)
+{
+	u8 msg[2] = {reg>>8, reg&0xff};
+	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+				   .buf  = msg, .len   = 2},
+				  {.addr = adr, .flags = I2C_M_RD,
+				   .buf  = val, .len   = 1} };
+	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int ddb_i2c_cmd(struct ddb_i2c *i2c, u32 adr, u32 cmd)
+{
+	struct ddb *dev = i2c->dev;
+	int stat;
+	u32 val;
+
+	i2c->done = 0;
+	ddbwritel((adr << 9) | cmd, i2c->regs + I2C_COMMAND);
+	stat = wait_event_timeout(i2c->wq, i2c->done == 1, HZ);
+	if (stat <= 0) {
+		printk(KERN_ERR "I2C timeout\n");
+		{ /* MSI debugging*/
+			u32 istat = ddbreadl(INTERRUPT_STATUS);
+			printk(KERN_ERR "IRS %08x\n", istat);
+			ddbwritel(istat, INTERRUPT_ACK);
+		}
+		return -EIO;
+	}
+	val = ddbreadl(i2c->regs+I2C_COMMAND);
+	if (val & 0x70000)
+		return -EIO;
+	return 0;
+}
+
+static int ddb_i2c_master_xfer(struct i2c_adapter *adapter,
+			       struct i2c_msg msg[], int num)
+{
+	struct ddb_i2c *i2c = (struct ddb_i2c *)i2c_get_adapdata(adapter);
+	struct ddb *dev = i2c->dev;
+	u8 addr = 0;
+
+	if (num)
+		addr = msg[0].addr;
+
+	if (num == 2 && msg[1].flags & I2C_M_RD &&
+	    !(msg[0].flags & I2C_M_RD)) {
+		memcpy_toio(dev->regs + I2C_TASKMEM_BASE + i2c->wbuf,
+			    msg[0].buf, msg[0].len);
+		ddbwritel(msg[0].len|(msg[1].len << 16),
+			  i2c->regs+I2C_TASKLENGTH);
+		if (!ddb_i2c_cmd(i2c, addr, 1)) {
+			memcpy_fromio(msg[1].buf,
+				      dev->regs + I2C_TASKMEM_BASE + i2c->rbuf,
+				      msg[1].len);
+			return num;
+		}
+	}
+
+	if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+		ddbcpyto(I2C_TASKMEM_BASE + i2c->wbuf, msg[0].buf, msg[0].len);
+		ddbwritel(msg[0].len, i2c->regs + I2C_TASKLENGTH);
+		if (!ddb_i2c_cmd(i2c, addr, 2))
+			return num;
+	}
+	if (num == 1 && (msg[0].flags & I2C_M_RD)) {
+		ddbwritel(msg[0].len << 16, i2c->regs + I2C_TASKLENGTH);
+		if (!ddb_i2c_cmd(i2c, addr, 3)) {
+			ddbcpyfrom(msg[0].buf,
+				   I2C_TASKMEM_BASE + i2c->rbuf, msg[0].len);
+			return num;
+		}
+	}
+	return -EIO;
+}
+
+
+static u32 ddb_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL;
+}
+
+struct i2c_algorithm ddb_i2c_algo = {
+	.master_xfer   = ddb_i2c_master_xfer,
+	.functionality = ddb_i2c_functionality,
+};
+
+static void ddb_i2c_release(struct ddb *dev)
+{
+	int i;
+	struct ddb_i2c *i2c;
+	struct i2c_adapter *adap;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		i2c = &dev->i2c[i];
+		adap = &i2c->adap;
+		i2c_del_adapter(adap);
+	}
+}
+
+static int ddb_i2c_init(struct ddb *dev)
+{
+	int i, j, stat = 0;
+	struct ddb_i2c *i2c;
+	struct i2c_adapter *adap;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		i2c = &dev->i2c[i];
+		i2c->dev = dev;
+		i2c->nr = i;
+		i2c->wbuf = i * (I2C_TASKMEM_SIZE / 4);
+		i2c->rbuf = i2c->wbuf + (I2C_TASKMEM_SIZE / 8);
+		i2c->regs = 0x80 + i * 0x20;
+		ddbwritel(I2C_SPEED_100, i2c->regs + I2C_TIMING);
+		ddbwritel((i2c->rbuf << 16) | i2c->wbuf,
+			  i2c->regs + I2C_TASKADDRESS);
+		init_waitqueue_head(&i2c->wq);
+
+		adap = &i2c->adap;
+		i2c_set_adapdata(adap, i2c);
+#ifdef I2C_ADAP_CLASS_TV_DIGITAL
+		adap->class = I2C_ADAP_CLASS_TV_DIGITAL|I2C_CLASS_TV_ANALOG;
+#else
+#ifdef I2C_CLASS_TV_ANALOG
+		adap->class = I2C_CLASS_TV_ANALOG;
+#endif
+#endif
+		strcpy(adap->name, "ddbridge");
+		adap->algo = &ddb_i2c_algo;
+		adap->algo_data = (void *)i2c;
+		adap->dev.parent = &dev->pdev->dev;
+		stat = i2c_add_adapter(adap);
+		if (stat)
+			break;
+	}
+	if (stat)
+		for (j = 0; j < i; j++) {
+			i2c = &dev->i2c[j];
+			adap = &i2c->adap;
+			i2c_del_adapter(adap);
+		}
+	return stat;
+}
+
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+#if 0
+static void set_table(struct ddb *dev, u32 off,
+		      dma_addr_t *pbuf, u32 num)
+{
+	u32 i, base;
+	u64 mem;
+
+	base = DMA_BASE_ADDRESS_TABLE + off;
+	for (i = 0; i < num; i++) {
+		mem = pbuf[i];
+		ddbwritel(mem & 0xffffffff, base + i * 8);
+		ddbwritel(mem >> 32, base + i * 8 + 4);
+	}
+}
+#endif
+
+static void ddb_address_table(struct ddb *dev)
+{
+	u32 i, j, base;
+	u64 mem;
+	dma_addr_t *pbuf;
+
+	for (i = 0; i < dev->info->port_num * 2; i++) {
+		base = DMA_BASE_ADDRESS_TABLE + i * 0x100;
+		pbuf = dev->input[i].pbuf;
+		for (j = 0; j < dev->input[i].dma_buf_num; j++) {
+			mem = pbuf[j];
+			ddbwritel(mem & 0xffffffff, base + j * 8);
+			ddbwritel(mem >> 32, base + j * 8 + 4);
+		}
+	}
+	for (i = 0; i < dev->info->port_num; i++) {
+		base = DMA_BASE_ADDRESS_TABLE + 0x800 + i * 0x100;
+		pbuf = dev->output[i].pbuf;
+		for (j = 0; j < dev->output[i].dma_buf_num; j++) {
+			mem = pbuf[j];
+			ddbwritel(mem & 0xffffffff, base + j * 8);
+			ddbwritel(mem >> 32, base + j * 8 + 4);
+		}
+	}
+}
+
+static void io_free(struct pci_dev *pdev, u8 **vbuf,
+		    dma_addr_t *pbuf, u32 size, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		if (vbuf[i]) {
+			pci_free_consistent(pdev, size, vbuf[i], pbuf[i]);
+			vbuf[i] = 0;
+		}
+	}
+}
+
+static int io_alloc(struct pci_dev *pdev, u8 **vbuf,
+		    dma_addr_t *pbuf, u32 size, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		vbuf[i] = pci_alloc_consistent(pdev, size, &pbuf[i]);
+		if (!vbuf[i])
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+static int ddb_buffers_alloc(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		switch (port->class) {
+		case DDB_PORT_TUNER:
+			if (io_alloc(dev->pdev, port->input[0]->vbuf,
+				     port->input[0]->pbuf,
+				     port->input[0]->dma_buf_size,
+				     port->input[0]->dma_buf_num) < 0)
+				return -1;
+			if (io_alloc(dev->pdev, port->input[1]->vbuf,
+				     port->input[1]->pbuf,
+				     port->input[1]->dma_buf_size,
+				     port->input[1]->dma_buf_num) < 0)
+				return -1;
+			break;
+		case DDB_PORT_CI:
+			if (io_alloc(dev->pdev, port->input[0]->vbuf,
+				     port->input[0]->pbuf,
+				     port->input[0]->dma_buf_size,
+				     port->input[0]->dma_buf_num) < 0)
+				return -1;
+			if (io_alloc(dev->pdev, port->output->vbuf,
+				     port->output->pbuf,
+				     port->output->dma_buf_size,
+				     port->output->dma_buf_num) < 0)
+				return -1;
+			break;
+		default:
+			break;
+		}
+	}
+	ddb_address_table(dev);
+	return 0;
+}
+
+static void ddb_buffers_free(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		io_free(dev->pdev, port->input[0]->vbuf,
+			port->input[0]->pbuf,
+			port->input[0]->dma_buf_size,
+			port->input[0]->dma_buf_num);
+		io_free(dev->pdev, port->input[1]->vbuf,
+			port->input[1]->pbuf,
+			port->input[1]->dma_buf_size,
+			port->input[1]->dma_buf_num);
+		io_free(dev->pdev, port->output->vbuf,
+			port->output->pbuf,
+			port->output->dma_buf_size,
+			port->output->dma_buf_num);
+	}
+}
+
+static void ddb_input_start(struct ddb_input *input)
+{
+	struct ddb *dev = input->port->dev;
+
+	spin_lock_irq(&input->lock);
+	input->cbuf = 0;
+	input->coff = 0;
+
+	/* reset */
+	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+	ddbwritel(2, TS_INPUT_CONTROL(input->nr));
+	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+
+	ddbwritel((1 << 16) |
+		  (input->dma_buf_num << 11) |
+		  (input->dma_buf_size >> 7),
+		  DMA_BUFFER_SIZE(input->nr));
+	ddbwritel(0, DMA_BUFFER_ACK(input->nr));
+
+	ddbwritel(1, DMA_BASE_WRITE);
+	ddbwritel(3, DMA_BUFFER_CONTROL(input->nr));
+	ddbwritel(9, TS_INPUT_CONTROL(input->nr));
+	input->running = 1;
+	spin_unlock_irq(&input->lock);
+}
+
+static void ddb_input_stop(struct ddb_input *input)
+{
+	struct ddb *dev = input->port->dev;
+
+	spin_lock_irq(&input->lock);
+	ddbwritel(0, TS_INPUT_CONTROL(input->nr));
+	ddbwritel(0, DMA_BUFFER_CONTROL(input->nr));
+	input->running = 0;
+	spin_unlock_irq(&input->lock);
+}
+
+static void ddb_output_start(struct ddb_output *output)
+{
+	struct ddb *dev = output->port->dev;
+
+	spin_lock_irq(&output->lock);
+	output->cbuf = 0;
+	output->coff = 0;
+	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(2, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(0x3c, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel((1 << 16) |
+		  (output->dma_buf_num << 11) |
+		  (output->dma_buf_size >> 7),
+		  DMA_BUFFER_SIZE(output->nr + 8));
+	ddbwritel(0, DMA_BUFFER_ACK(output->nr + 8));
+
+	ddbwritel(1, DMA_BASE_READ);
+	ddbwritel(3, DMA_BUFFER_CONTROL(output->nr + 8));
+	/* ddbwritel(0xbd, TS_OUTPUT_CONTROL(output->nr)); */
+	ddbwritel(0x1d, TS_OUTPUT_CONTROL(output->nr));
+	output->running = 1;
+	spin_unlock_irq(&output->lock);
+}
+
+static void ddb_output_stop(struct ddb_output *output)
+{
+	struct ddb *dev = output->port->dev;
+
+	spin_lock_irq(&output->lock);
+	ddbwritel(0, TS_OUTPUT_CONTROL(output->nr));
+	ddbwritel(0, DMA_BUFFER_CONTROL(output->nr + 8));
+	output->running = 0;
+	spin_unlock_irq(&output->lock);
+}
+
+static u32 ddb_output_free(struct ddb_output *output)
+{
+	u32 idx, off, stat = output->stat;
+	s32 diff;
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	if (output->cbuf != idx) {
+		if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
+		    (output->dma_buf_size - output->coff <= 188))
+			return 0;
+		return 188;
+	}
+	diff = off - output->coff;
+	if (diff <= 0 || diff > 188)
+		return 188;
+	return 0;
+}
+
+static ssize_t ddb_output_write(struct ddb_output *output,
+				const u8 *buf, size_t count)
+{
+	struct ddb *dev = output->port->dev;
+	u32 idx, off, stat = output->stat;
+	u32 left = count, len;
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	while (left) {
+		len = output->dma_buf_size - output->coff;
+		if ((((output->cbuf + 1) % output->dma_buf_num) == idx) &&
+		    (off == 0)) {
+			if (len <= 188)
+				break;
+			len -= 188;
+		}
+		if (output->cbuf == idx) {
+			if (off > output->coff) {
+#if 1
+				len = off - output->coff;
+				len -= (len % 188);
+				if (len <= 188)
+
+#endif
+					break;
+				len -= 188;
+			}
+		}
+		if (len > left)
+			len = left;
+		if (copy_from_user(output->vbuf[output->cbuf] + output->coff,
+				   buf, len))
+			return -EIO;
+		left -= len;
+		buf += len;
+		output->coff += len;
+		if (output->coff == output->dma_buf_size) {
+			output->coff = 0;
+			output->cbuf = ((output->cbuf + 1) % output->dma_buf_num);
+		}
+		ddbwritel((output->cbuf << 11) | (output->coff >> 7),
+			  DMA_BUFFER_ACK(output->nr + 8));
+	}
+	return count - left;
+}
+
+static u32 ddb_input_avail(struct ddb_input *input)
+{
+	struct ddb *dev = input->port->dev;
+	u32 idx, off, stat = input->stat;
+	u32 ctrl = ddbreadl(DMA_BUFFER_CONTROL(input->nr));
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	if (ctrl & 4) {
+		printk(KERN_ERR "IA %d %d %08x\n", idx, off, ctrl);
+		ddbwritel(input->stat, DMA_BUFFER_ACK(input->nr));
+		return 0;
+	}
+	if (input->cbuf != idx)
+		return 188;
+	return 0;
+}
+
+static size_t ddb_input_read(struct ddb_input *input, u8 *buf, size_t count)
+{
+	struct ddb *dev = input->port->dev;
+	u32 left = count;
+	u32 idx, off, free, stat = input->stat;
+	int ret;
+
+	idx = (stat >> 11) & 0x1f;
+	off = (stat & 0x7ff) << 7;
+
+	while (left) {
+		if (input->cbuf == idx)
+			return count - left;
+		free = input->dma_buf_size - input->coff;
+		if (free > left)
+			free = left;
+		ret = copy_to_user(buf, input->vbuf[input->cbuf] +
+				   input->coff, free);
+		input->coff += free;
+		if (input->coff == input->dma_buf_size) {
+			input->coff = 0;
+			input->cbuf = (input->cbuf+1) % input->dma_buf_num;
+		}
+		left -= free;
+		ddbwritel((input->cbuf << 11) | (input->coff >> 7),
+			  DMA_BUFFER_ACK(input->nr));
+	}
+	return count;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+#if 0
+static struct ddb_input *fe2input(struct ddb *dev, struct dvb_frontend *fe)
+{
+	int i;
+
+	for (i = 0; i < dev->info->port_num * 2; i++) {
+		if (dev->input[i].fe == fe)
+			return &dev->input[i];
+	}
+	return NULL;
+}
+#endif
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct ddb_input *input = fe->sec_priv;
+	struct ddb_port *port = input->port;
+	int status;
+
+	if (enable) {
+		mutex_lock(&port->i2c_gate_lock);
+		status = input->gate_ctrl(fe, 1);
+	} else {
+		status = input->gate_ctrl(fe, 0);
+		mutex_unlock(&port->i2c_gate_lock);
+	}
+	return status;
+}
+
+static int demod_attach_drxk(struct ddb_input *input)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct dvb_frontend *fe;
+	struct drxk_config config;
+
+	memset(&config, 0, sizeof(config));
+	config.adr = 0x29 + (input->nr & 1);
+
+	fe = input->fe = dvb_attach(drxk_attach, &config, i2c, &input->fe2);
+	if (!input->fe) {
+		printk(KERN_ERR "No DRXK found!\n");
+		return -ENODEV;
+	}
+	fe->sec_priv = input;
+	input->gate_ctrl = fe->ops.i2c_gate_ctrl;
+	fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+	return 0;
+}
+
+static int tuner_attach_tda18271(struct ddb_input *input)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct dvb_frontend *fe;
+
+	if (input->fe->ops.i2c_gate_ctrl)
+		input->fe->ops.i2c_gate_ctrl(input->fe, 1);
+	fe = dvb_attach(tda18271c2dd_attach, input->fe, i2c, 0x60);
+	if (!fe) {
+		printk(KERN_ERR "No TDA18271 found!\n");
+		return -ENODEV;
+	}
+	if (input->fe->ops.i2c_gate_ctrl)
+		input->fe->ops.i2c_gate_ctrl(input->fe, 0);
+	return 0;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static struct stv090x_config stv0900 = {
+	.device         = STV0900,
+	.demod_mode     = STV090x_DUAL,
+	.clk_mode       = STV090x_CLK_EXT,
+
+	.xtal           = 27000000,
+	.address        = 0x69,
+
+	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+	.repeater_level = STV090x_RPTLEVEL_16,
+
+	.adc1_range	= STV090x_ADC_1Vpp,
+	.adc2_range	= STV090x_ADC_1Vpp,
+
+	.diseqc_envelope_mode = true,
+};
+
+static struct stv090x_config stv0900_aa = {
+	.device         = STV0900,
+	.demod_mode     = STV090x_DUAL,
+	.clk_mode       = STV090x_CLK_EXT,
+
+	.xtal           = 27000000,
+	.address        = 0x68,
+
+	.ts1_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+	.ts2_mode       = STV090x_TSMODE_SERIAL_PUNCTURED,
+
+	.repeater_level = STV090x_RPTLEVEL_16,
+
+	.adc1_range	= STV090x_ADC_1Vpp,
+	.adc2_range	= STV090x_ADC_1Vpp,
+
+	.diseqc_envelope_mode = true,
+};
+
+static struct stv6110x_config stv6110a = {
+	.addr    = 0x60,
+	.refclk	 = 27000000,
+	.clk_div = 1,
+};
+
+static struct stv6110x_config stv6110b = {
+	.addr    = 0x63,
+	.refclk	 = 27000000,
+	.clk_div = 1,
+};
+
+static int demod_attach_stv0900(struct ddb_input *input, int type)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
+
+	input->fe = dvb_attach(stv090x_attach, feconf, i2c,
+			       (input->nr & 1) ? STV090x_DEMODULATOR_1
+			       : STV090x_DEMODULATOR_0);
+	if (!input->fe) {
+		printk(KERN_ERR "No STV0900 found!\n");
+		return -ENODEV;
+	}
+	if (!dvb_attach(lnbh24_attach, input->fe, i2c, 0,
+			0, (input->nr & 1) ?
+			(0x09 - type) : (0x0b - type))) {
+		printk(KERN_ERR "No LNBH24 found!\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int tuner_attach_stv6110(struct ddb_input *input, int type)
+{
+	struct i2c_adapter *i2c = &input->port->i2c->adap;
+	struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
+	struct stv6110x_config *tunerconf = (input->nr & 1) ?
+		&stv6110b : &stv6110a;
+	struct stv6110x_devctl *ctl;
+
+	ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
+	if (!ctl) {
+		printk(KERN_ERR "No STV6110X found!\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO "attach tuner input %d adr %02x\n",
+			 input->nr, tunerconf->addr);
+
+	feconf->tuner_init          = ctl->tuner_init;
+	feconf->tuner_sleep         = ctl->tuner_sleep;
+	feconf->tuner_set_mode      = ctl->tuner_set_mode;
+	feconf->tuner_set_frequency = ctl->tuner_set_frequency;
+	feconf->tuner_get_frequency = ctl->tuner_get_frequency;
+	feconf->tuner_set_bandwidth = ctl->tuner_set_bandwidth;
+	feconf->tuner_get_bandwidth = ctl->tuner_get_bandwidth;
+	feconf->tuner_set_bbgain    = ctl->tuner_set_bbgain;
+	feconf->tuner_get_bbgain    = ctl->tuner_get_bbgain;
+	feconf->tuner_set_refclk    = ctl->tuner_set_refclk;
+	feconf->tuner_get_status    = ctl->tuner_get_status;
+
+	return 0;
+}
+
+static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
+			    int (*start_feed)(struct dvb_demux_feed *),
+			    int (*stop_feed)(struct dvb_demux_feed *),
+			    void *priv)
+{
+	dvbdemux->priv = priv;
+
+	dvbdemux->filternum = 256;
+	dvbdemux->feednum = 256;
+	dvbdemux->start_feed = start_feed;
+	dvbdemux->stop_feed = stop_feed;
+	dvbdemux->write_to_decoder = NULL;
+	dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
+				      DMX_SECTION_FILTERING |
+				      DMX_MEMORY_BASED_FILTERING);
+	return dvb_dmx_init(dvbdemux);
+}
+
+static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
+			       struct dvb_demux *dvbdemux,
+			       struct dmx_frontend *hw_frontend,
+			       struct dmx_frontend *mem_frontend,
+			       struct dvb_adapter *dvb_adapter)
+{
+	int ret;
+
+	dmxdev->filternum = 256;
+	dmxdev->demux = &dvbdemux->dmx;
+	dmxdev->capabilities = 0;
+	ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
+	if (ret < 0)
+		return ret;
+
+	hw_frontend->source = DMX_FRONTEND_0;
+	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
+	mem_frontend->source = DMX_MEMORY_FE;
+	dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
+	return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
+}
+
+static int start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct ddb_input *input = dvbdmx->priv;
+
+	if (!input->users)
+		ddb_input_start(input);
+
+	return ++input->users;
+}
+
+static int stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+	struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
+	struct ddb_input *input = dvbdmx->priv;
+
+	if (--input->users)
+		return input->users;
+
+	ddb_input_stop(input);
+	return 0;
+}
+
+
+static void dvb_input_detach(struct ddb_input *input)
+{
+	struct dvb_adapter *adap = &input->adap;
+	struct dvb_demux *dvbdemux = &input->demux;
+
+	switch (input->attached) {
+	case 5:
+		if (input->fe2)
+			dvb_unregister_frontend(input->fe2);
+		if (input->fe) {
+			dvb_unregister_frontend(input->fe);
+			dvb_frontend_detach(input->fe);
+			input->fe = NULL;
+		}
+	case 4:
+		dvb_net_release(&input->dvbnet);
+
+	case 3:
+		dvbdemux->dmx.close(&dvbdemux->dmx);
+		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+					      &input->hw_frontend);
+		dvbdemux->dmx.remove_frontend(&dvbdemux->dmx,
+					      &input->mem_frontend);
+		dvb_dmxdev_release(&input->dmxdev);
+
+	case 2:
+		dvb_dmx_release(&input->demux);
+
+	case 1:
+		dvb_unregister_adapter(adap);
+	}
+	input->attached = 0;
+}
+
+static int dvb_input_attach(struct ddb_input *input)
+{
+	int ret;
+	struct ddb_port *port = input->port;
+	struct dvb_adapter *adap = &input->adap;
+	struct dvb_demux *dvbdemux = &input->demux;
+
+	ret = dvb_register_adapter(adap, "DDBridge", THIS_MODULE,
+				   &input->port->dev->pdev->dev,
+				   adapter_nr);
+	if (ret < 0) {
+		printk(KERN_ERR "ddbridge: Could not register adapter."
+		       "Check if you enabled enough adapters in dvb-core!\n");
+		return ret;
+	}
+	input->attached = 1;
+
+	ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
+				      start_feed,
+				      stop_feed, input);
+	if (ret < 0)
+		return ret;
+	input->attached = 2;
+
+	ret = my_dvb_dmxdev_ts_card_init(&input->dmxdev, &input->demux,
+					 &input->hw_frontend,
+					 &input->mem_frontend, adap);
+	if (ret < 0)
+		return ret;
+	input->attached = 3;
+
+	ret = dvb_net_init(adap, &input->dvbnet, input->dmxdev.demux);
+	if (ret < 0)
+		return ret;
+	input->attached = 4;
+
+	input->fe = 0;
+	switch (port->type) {
+	case DDB_TUNER_DVBS_ST:
+		if (demod_attach_stv0900(input, 0) < 0)
+			return -ENODEV;
+		if (tuner_attach_stv6110(input, 0) < 0)
+			return -ENODEV;
+		if (input->fe) {
+			if (dvb_register_frontend(adap, input->fe) < 0)
+				return -ENODEV;
+		}
+		break;
+	case DDB_TUNER_DVBS_ST_AA:
+		if (demod_attach_stv0900(input, 1) < 0)
+			return -ENODEV;
+		if (tuner_attach_stv6110(input, 1) < 0)
+			return -ENODEV;
+		if (input->fe) {
+			if (dvb_register_frontend(adap, input->fe) < 0)
+				return -ENODEV;
+		}
+		break;
+	case DDB_TUNER_DVBCT_TR:
+		if (demod_attach_drxk(input) < 0)
+			return -ENODEV;
+		if (tuner_attach_tda18271(input) < 0)
+			return -ENODEV;
+		if (input->fe) {
+			if (dvb_register_frontend(adap, input->fe) < 0)
+				return -ENODEV;
+		}
+		if (input->fe2) {
+			if (dvb_register_frontend(adap, input->fe2) < 0)
+				return -ENODEV;
+			input->fe2->tuner_priv = input->fe->tuner_priv;
+			memcpy(&input->fe2->ops.tuner_ops,
+			       &input->fe->ops.tuner_ops,
+			       sizeof(struct dvb_tuner_ops));
+		}
+		break;
+	}
+	input->attached = 5;
+	return 0;
+}
+
+/****************************************************************************/
+/****************************************************************************/
+
+static ssize_t ts_write(struct file *file, const char *buf,
+			size_t count, loff_t *ppos)
+{
+	struct dvb_device *dvbdev = file->private_data;
+	struct ddb_output *output = dvbdev->priv;
+	size_t left = count;
+	int stat;
+
+	while (left) {
+		if (ddb_output_free(output) < 188) {
+			if (file->f_flags & O_NONBLOCK)
+				break;
+			if (wait_event_interruptible(
+				    output->wq, ddb_output_free(output) >= 188) < 0)
+				break;
+		}
+		stat = ddb_output_write(output, buf, left);
+		if (stat < 0)
+			break;
+		buf += stat;
+		left -= stat;
+	}
+	return (left == count) ? -EAGAIN : (count - left);
+}
+
+static ssize_t ts_read(struct file *file, char *buf,
+		       size_t count, loff_t *ppos)
+{
+	struct dvb_device *dvbdev = file->private_data;
+	struct ddb_output *output = dvbdev->priv;
+	struct ddb_input *input = output->port->input[0];
+	int left, read;
+
+	count -= count % 188;
+	left = count;
+	while (left) {
+		if (ddb_input_avail(input) < 188) {
+			if (file->f_flags & O_NONBLOCK)
+				break;
+			if (wait_event_interruptible(
+				    input->wq, ddb_input_avail(input) >= 188) < 0)
+				break;
+		}
+		read = ddb_input_read(input, buf, left);
+		left -= read;
+		buf += read;
+	}
+	return (left == count) ? -EAGAIN : (count - left);
+}
+
+static unsigned int ts_poll(struct file *file, poll_table *wait)
+{
+	/*
+	struct dvb_device *dvbdev = file->private_data;
+	struct ddb_output *output = dvbdev->priv;
+	struct ddb_input *input = output->port->input[0];
+	*/
+	unsigned int mask = 0;
+
+#if 0
+	if (data_avail_to_read)
+		mask |= POLLIN | POLLRDNORM;
+	if (data_avail_to_write)
+		mask |= POLLOUT | POLLWRNORM;
+
+	poll_wait(file, &read_queue, wait);
+	poll_wait(file, &write_queue, wait);
+#endif
+	return mask;
+}
+
+static const struct file_operations ci_fops = {
+	.owner   = THIS_MODULE,
+	.read    = ts_read,
+	.write   = ts_write,
+	.open    = dvb_generic_open,
+	.release = dvb_generic_release,
+	.poll    = ts_poll,
+	.mmap    = 0,
+};
+
+static struct dvb_device dvbdev_ci = {
+	.priv    = 0,
+	.readers = -1,
+	.writers = -1,
+	.users   = -1,
+	.fops    = &ci_fops,
+};
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void input_tasklet(unsigned long data)
+{
+	struct ddb_input *input = (struct ddb_input *) data;
+	struct ddb *dev = input->port->dev;
+
+	spin_lock(&input->lock);
+	if (!input->running) {
+		spin_unlock(&input->lock);
+		return;
+	}
+	input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
+
+	if (input->port->class == DDB_PORT_TUNER) {
+		if (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))
+			printk(KERN_ERR "Overflow input %d\n", input->nr);
+		while (input->cbuf != ((input->stat >> 11) & 0x1f)
+		       || (4&ddbreadl(DMA_BUFFER_CONTROL(input->nr)))) {
+			dvb_dmx_swfilter_packets(&input->demux,
+						 input->vbuf[input->cbuf],
+						 input->dma_buf_size / 188);
+
+			input->cbuf = (input->cbuf + 1) % input->dma_buf_num;
+			ddbwritel((input->cbuf << 11),
+				  DMA_BUFFER_ACK(input->nr));
+			input->stat = ddbreadl(DMA_BUFFER_CURRENT(input->nr));
+		       }
+	}
+	if (input->port->class == DDB_PORT_CI)
+		wake_up(&input->wq);
+	spin_unlock(&input->lock);
+}
+
+static void output_tasklet(unsigned long data)
+{
+	struct ddb_output *output = (struct ddb_output *) data;
+	struct ddb *dev = output->port->dev;
+
+	spin_lock(&output->lock);
+	if (!output->running) {
+		spin_unlock(&output->lock);
+		return;
+	}
+	output->stat = ddbreadl(DMA_BUFFER_CURRENT(output->nr + 8));
+	wake_up(&output->wq);
+	spin_unlock(&output->lock);
+}
+
+
+struct cxd2099_cfg cxd_cfg = {
+	.bitrate =  62000,
+	.adr     =  0x40,
+	.polarity = 1,
+	.clock_mode = 1,
+};
+
+static int ddb_ci_attach(struct ddb_port *port)
+{
+	int ret;
+
+	ret = dvb_register_adapter(&port->output->adap,
+				   "DDBridge",
+				   THIS_MODULE,
+				   &port->dev->pdev->dev,
+				   adapter_nr);
+	if (ret < 0)
+		return ret;
+	port->en = cxd2099_attach(&cxd_cfg, port, &port->i2c->adap);
+	if (!port->en) {
+		dvb_unregister_adapter(&port->output->adap);
+		return -ENODEV;
+	}
+	ddb_input_start(port->input[0]);
+	ddb_output_start(port->output);
+	dvb_ca_en50221_init(&port->output->adap,
+			    port->en, 0, 1);
+	ret = dvb_register_device(&port->output->adap, &port->output->dev,
+				  &dvbdev_ci, (void *) port->output,
+				  DVB_DEVICE_SEC);
+	return ret;
+}
+
+static int ddb_port_attach(struct ddb_port *port)
+{
+	int ret = 0;
+
+	switch (port->class) {
+	case DDB_PORT_TUNER:
+		ret = dvb_input_attach(port->input[0]);
+		if (ret < 0)
+			break;
+		ret = dvb_input_attach(port->input[1]);
+		break;
+	case DDB_PORT_CI:
+		ret = ddb_ci_attach(port);
+		break;
+	default:
+		break;
+	}
+	if (ret < 0)
+		printk(KERN_ERR "port_attach on port %d failed\n", port->nr);
+	return ret;
+}
+
+static int ddb_ports_attach(struct ddb *dev)
+{
+	int i, ret = 0;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		ret = ddb_port_attach(port);
+		if (ret < 0)
+			break;
+	}
+	return ret;
+}
+
+static void ddb_ports_detach(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		switch (port->class) {
+		case DDB_PORT_TUNER:
+			dvb_input_detach(port->input[0]);
+			dvb_input_detach(port->input[1]);
+			break;
+		case DDB_PORT_CI:
+			if (port->output->dev)
+				dvb_unregister_device(port->output->dev);
+			if (port->en) {
+				ddb_input_stop(port->input[0]);
+				ddb_output_stop(port->output);
+				dvb_ca_en50221_release(port->en);
+				kfree(port->en);
+				port->en = 0;
+				dvb_unregister_adapter(&port->output->adap);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/****************************************************************************/
+
+static int port_has_ci(struct ddb_port *port)
+{
+	u8 val;
+	return i2c_read_reg(&port->i2c->adap, 0x40, 0, &val) ? 0 : 1;
+}
+
+static int port_has_stv0900(struct ddb_port *port)
+{
+	u8 val;
+	if (i2c_read_reg16(&port->i2c->adap, 0x69, 0xf100, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int port_has_stv0900_aa(struct ddb_port *port)
+{
+	u8 val;
+	if (i2c_read_reg16(&port->i2c->adap, 0x68, 0xf100, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int port_has_drxks(struct ddb_port *port)
+{
+	u8 val;
+	if (i2c_read(&port->i2c->adap, 0x29, &val) < 0)
+		return 0;
+	if (i2c_read(&port->i2c->adap, 0x2a, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static void ddb_port_probe(struct ddb_port *port)
+{
+	struct ddb *dev = port->dev;
+	char *modname = "NO MODULE";
+
+	port->class = DDB_PORT_NONE;
+
+	if (port_has_ci(port)) {
+		modname = "CI";
+		port->class = DDB_PORT_CI;
+		ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
+	} else if (port_has_stv0900(port)) {
+		modname = "DUAL DVB-S2";
+		port->class = DDB_PORT_TUNER;
+		port->type = DDB_TUNER_DVBS_ST;
+		ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
+	} else if (port_has_stv0900_aa(port)) {
+		modname = "DUAL DVB-S2";
+		port->class = DDB_PORT_TUNER;
+		port->type = DDB_TUNER_DVBS_ST_AA;
+		ddbwritel(I2C_SPEED_100, port->i2c->regs + I2C_TIMING);
+	} else if (port_has_drxks(port)) {
+		modname = "DUAL DVB-C/T";
+		port->class = DDB_PORT_TUNER;
+		port->type = DDB_TUNER_DVBCT_TR;
+		ddbwritel(I2C_SPEED_400, port->i2c->regs + I2C_TIMING);
+	}
+	printk(KERN_INFO "Port %d (TAB %d): %s\n",
+			 port->nr, port->nr+1, modname);
+}
+
+static void ddb_input_init(struct ddb_port *port, int nr)
+{
+	struct ddb *dev = port->dev;
+	struct ddb_input *input = &dev->input[nr];
+
+	input->nr = nr;
+	input->port = port;
+	input->dma_buf_num = INPUT_DMA_BUFS;
+	input->dma_buf_size = INPUT_DMA_SIZE;
+	ddbwritel(0, TS_INPUT_CONTROL(nr));
+	ddbwritel(2, TS_INPUT_CONTROL(nr));
+	ddbwritel(0, TS_INPUT_CONTROL(nr));
+	ddbwritel(0, DMA_BUFFER_ACK(nr));
+	tasklet_init(&input->tasklet, input_tasklet, (unsigned long) input);
+	spin_lock_init(&input->lock);
+	init_waitqueue_head(&input->wq);
+}
+
+static void ddb_output_init(struct ddb_port *port, int nr)
+{
+	struct ddb *dev = port->dev;
+	struct ddb_output *output = &dev->output[nr];
+	output->nr = nr;
+	output->port = port;
+	output->dma_buf_num = OUTPUT_DMA_BUFS;
+	output->dma_buf_size = OUTPUT_DMA_SIZE;
+
+	ddbwritel(0, TS_OUTPUT_CONTROL(nr));
+	ddbwritel(2, TS_OUTPUT_CONTROL(nr));
+	ddbwritel(0, TS_OUTPUT_CONTROL(nr));
+	tasklet_init(&output->tasklet, output_tasklet, (unsigned long) output);
+	init_waitqueue_head(&output->wq);
+}
+
+static void ddb_ports_init(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		port->dev = dev;
+		port->nr = i;
+		port->i2c = &dev->i2c[i];
+		port->input[0] = &dev->input[2 * i];
+		port->input[1] = &dev->input[2 * i + 1];
+		port->output = &dev->output[i];
+
+		mutex_init(&port->i2c_gate_lock);
+		ddb_port_probe(port);
+		ddb_input_init(port, 2 * i);
+		ddb_input_init(port, 2 * i + 1);
+		ddb_output_init(port, i);
+	}
+}
+
+static void ddb_ports_release(struct ddb *dev)
+{
+	int i;
+	struct ddb_port *port;
+
+	for (i = 0; i < dev->info->port_num; i++) {
+		port = &dev->port[i];
+		port->dev = dev;
+		tasklet_kill(&port->input[0]->tasklet);
+		tasklet_kill(&port->input[1]->tasklet);
+		tasklet_kill(&port->output->tasklet);
+	}
+}
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void irq_handle_i2c(struct ddb *dev, int n)
+{
+	struct ddb_i2c *i2c = &dev->i2c[n];
+
+	i2c->done = 1;
+	wake_up(&i2c->wq);
+}
+
+static irqreturn_t irq_handler(int irq, void *dev_id)
+{
+	struct ddb *dev = (struct ddb *) dev_id;
+	u32 s = ddbreadl(INTERRUPT_STATUS);
+
+	if (!s)
+		return IRQ_NONE;
+
+	do {
+		ddbwritel(s, INTERRUPT_ACK);
+
+		if (s & 0x00000001)
+			irq_handle_i2c(dev, 0);
+		if (s & 0x00000002)
+			irq_handle_i2c(dev, 1);
+		if (s & 0x00000004)
+			irq_handle_i2c(dev, 2);
+		if (s & 0x00000008)
+			irq_handle_i2c(dev, 3);
+
+		if (s & 0x00000100)
+			tasklet_schedule(&dev->input[0].tasklet);
+		if (s & 0x00000200)
+			tasklet_schedule(&dev->input[1].tasklet);
+		if (s & 0x00000400)
+			tasklet_schedule(&dev->input[2].tasklet);
+		if (s & 0x00000800)
+			tasklet_schedule(&dev->input[3].tasklet);
+		if (s & 0x00001000)
+			tasklet_schedule(&dev->input[4].tasklet);
+		if (s & 0x00002000)
+			tasklet_schedule(&dev->input[5].tasklet);
+		if (s & 0x00004000)
+			tasklet_schedule(&dev->input[6].tasklet);
+		if (s & 0x00008000)
+			tasklet_schedule(&dev->input[7].tasklet);
+
+		if (s & 0x00010000)
+			tasklet_schedule(&dev->output[0].tasklet);
+		if (s & 0x00020000)
+			tasklet_schedule(&dev->output[1].tasklet);
+		if (s & 0x00040000)
+			tasklet_schedule(&dev->output[2].tasklet);
+		if (s & 0x00080000)
+			tasklet_schedule(&dev->output[3].tasklet);
+
+		/* if (s & 0x000f0000)	printk(KERN_DEBUG "%08x\n", istat); */
+	} while ((s = ddbreadl(INTERRUPT_STATUS)));
+
+	return IRQ_HANDLED;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static int flashio(struct ddb *dev, u8 *wbuf, u32 wlen, u8 *rbuf, u32 rlen)
+{
+	u32 data, shift;
+
+	if (wlen > 4)
+		ddbwritel(1, SPI_CONTROL);
+	while (wlen > 4) {
+		/* FIXME: check for big-endian */
+		data = swab32(*(u32 *)wbuf);
+		wbuf += 4;
+		wlen -= 4;
+		ddbwritel(data, SPI_DATA);
+		while (ddbreadl(SPI_CONTROL) & 0x0004)
+			;
+	}
+
+	if (rlen)
+		ddbwritel(0x0001 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
+	else
+		ddbwritel(0x0003 | ((wlen << (8 + 3)) & 0x1f00), SPI_CONTROL);
+
+	data = 0;
+	shift = ((4 - wlen) * 8);
+	while (wlen) {
+		data <<= 8;
+		data |= *wbuf;
+		wlen--;
+		wbuf++;
+	}
+	if (shift)
+		data <<= shift;
+	ddbwritel(data, SPI_DATA);
+	while (ddbreadl(SPI_CONTROL) & 0x0004)
+		;
+
+	if (!rlen) {
+		ddbwritel(0, SPI_CONTROL);
+		return 0;
+	}
+	if (rlen > 4)
+		ddbwritel(1, SPI_CONTROL);
+
+	while (rlen > 4) {
+		ddbwritel(0xffffffff, SPI_DATA);
+		while (ddbreadl(SPI_CONTROL) & 0x0004)
+			;
+		data = ddbreadl(SPI_DATA);
+		*(u32 *) rbuf = swab32(data);
+		rbuf += 4;
+		rlen -= 4;
+	}
+	ddbwritel(0x0003 | ((rlen << (8 + 3)) & 0x1F00), SPI_CONTROL);
+	ddbwritel(0xffffffff, SPI_DATA);
+	while (ddbreadl(SPI_CONTROL) & 0x0004)
+		;
+
+	data = ddbreadl(SPI_DATA);
+	ddbwritel(0, SPI_CONTROL);
+
+	if (rlen < 4)
+		data <<= ((4 - rlen) * 8);
+
+	while (rlen > 0) {
+		*rbuf = ((data >> 24) & 0xff);
+		data <<= 8;
+		rbuf++;
+		rlen--;
+	}
+	return 0;
+}
+
+#define DDB_MAGIC 'd'
+
+struct ddb_flashio {
+	__u8 *write_buf;
+	__u32 write_len;
+	__u8 *read_buf;
+	__u32 read_len;
+};
+
+#define IOCTL_DDB_FLASHIO  _IOWR(DDB_MAGIC, 0x00, struct ddb_flashio)
+
+#define DDB_NAME "ddbridge"
+
+static u32 ddb_num;
+static struct ddb *ddbs[32];
+static struct class *ddb_class;
+static int ddb_major;
+
+static int ddb_open(struct inode *inode, struct file *file)
+{
+	struct ddb *dev = ddbs[iminor(inode)];
+
+	file->private_data = dev;
+	return 0;
+}
+
+static long ddb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct ddb *dev = file->private_data;
+	void *parg = (void *)arg;
+	int res = -EFAULT;
+
+	switch (cmd) {
+	case IOCTL_DDB_FLASHIO:
+	{
+		struct ddb_flashio fio;
+		u8 *rbuf, *wbuf;
+
+		if (copy_from_user(&fio, parg, sizeof(fio)))
+			break;
+		if (fio.write_len + fio.read_len > 1028) {
+			printk(KERN_ERR "IOBUF too small\n");
+			return -ENOMEM;
+		}
+		wbuf = &dev->iobuf[0];
+		if (!wbuf)
+			return -ENOMEM;
+		rbuf = wbuf + fio.write_len;
+		if (copy_from_user(wbuf, fio.write_buf, fio.write_len)) {
+			vfree(wbuf);
+			break;
+		}
+		res = flashio(dev, wbuf, fio.write_len,
+			      rbuf, fio.read_len);
+		if (copy_to_user(fio.read_buf, rbuf, fio.read_len))
+			res = -EFAULT;
+		break;
+	}
+	default:
+		break;
+	}
+	return res;
+}
+
+static const struct file_operations ddb_fops = {
+	.unlocked_ioctl = ddb_ioctl,
+	.open           = ddb_open,
+};
+
+static char *ddb_devnode(struct device *device, mode_t *mode)
+{
+	struct ddb *dev = dev_get_drvdata(device);
+
+	return kasprintf(GFP_KERNEL, "ddbridge/card%d", dev->nr);
+}
+
+static int ddb_class_create(void)
+{
+	ddb_major = register_chrdev(0, DDB_NAME, &ddb_fops);
+	if (ddb_major < 0)
+		return ddb_major;
+
+	ddb_class = class_create(THIS_MODULE, DDB_NAME);
+	if (IS_ERR(ddb_class)) {
+		unregister_chrdev(ddb_major, DDB_NAME);
+		return -1;
+	}
+	ddb_class->devnode = ddb_devnode;
+	return 0;
+}
+
+static void ddb_class_destroy(void)
+{
+	class_destroy(ddb_class);
+	unregister_chrdev(ddb_major, DDB_NAME);
+}
+
+static int ddb_device_create(struct ddb *dev)
+{
+	dev->nr = ddb_num++;
+	dev->ddb_dev = device_create(ddb_class, NULL,
+				     MKDEV(ddb_major, dev->nr),
+				     dev, "ddbridge%d", dev->nr);
+	ddbs[dev->nr] = dev;
+	if (IS_ERR(dev->ddb_dev))
+		return -1;
+	return 0;
+}
+
+static void ddb_device_destroy(struct ddb *dev)
+{
+	ddb_num--;
+	if (IS_ERR(dev->ddb_dev))
+		return;
+	device_destroy(ddb_class, MKDEV(ddb_major, 0));
+}
+
+
+/****************************************************************************/
+/****************************************************************************/
+/****************************************************************************/
+
+static void ddb_unmap(struct ddb *dev)
+{
+	if (dev->regs)
+		iounmap(dev->regs);
+	vfree(dev);
+}
+
+
+static void __devexit ddb_remove(struct pci_dev *pdev)
+{
+	struct ddb *dev = (struct ddb *) pci_get_drvdata(pdev);
+
+	ddb_ports_detach(dev);
+	ddb_i2c_release(dev);
+
+	ddbwritel(0, INTERRUPT_ENABLE);
+	free_irq(dev->pdev->irq, dev);
+#ifdef CONFIG_PCI_MSI
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+#endif
+	ddb_ports_release(dev);
+	ddb_buffers_free(dev);
+	ddb_device_destroy(dev);
+
+	ddb_unmap(dev);
+	pci_set_drvdata(pdev, 0);
+	pci_disable_device(pdev);
+}
+
+
+static int __devinit ddb_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *id)
+{
+	struct ddb *dev;
+	int stat = 0;
+	int irq_flag = IRQF_SHARED;
+
+	if (pci_enable_device(pdev) < 0)
+		return -ENODEV;
+
+	dev = vmalloc(sizeof(struct ddb));
+	if (dev == NULL)
+		return -ENOMEM;
+	memset(dev, 0, sizeof(struct ddb));
+
+	dev->pdev = pdev;
+	pci_set_drvdata(pdev, dev);
+	dev->info = (struct ddb_info *) id->driver_data;
+	printk(KERN_INFO "DDBridge driver detected: %s\n", dev->info->name);
+
+	dev->regs = ioremap(pci_resource_start(dev->pdev, 0),
+			    pci_resource_len(dev->pdev, 0));
+	if (!dev->regs) {
+		stat = -ENOMEM;
+		goto fail;
+	}
+	printk(KERN_INFO "HW %08x FW %08x\n", ddbreadl(0), ddbreadl(4));
+
+#ifdef CONFIG_PCI_MSI
+	if (pci_msi_enabled())
+		stat = pci_enable_msi(dev->pdev);
+	if (stat) {
+		printk(KERN_INFO ": MSI not available.\n");
+	} else {
+		irq_flag = 0;
+		dev->msi = 1;
+	}
+#endif
+	stat = request_irq(dev->pdev->irq, irq_handler,
+			   irq_flag, "DDBridge", (void *) dev);
+	if (stat < 0)
+		goto fail1;
+	ddbwritel(0, DMA_BASE_WRITE);
+	ddbwritel(0, DMA_BASE_READ);
+	ddbwritel(0xffffffff, INTERRUPT_ACK);
+	ddbwritel(0xfff0f, INTERRUPT_ENABLE);
+	ddbwritel(0, MSI1_ENABLE);
+
+	if (ddb_i2c_init(dev) < 0)
+		goto fail1;
+	ddb_ports_init(dev);
+	if (ddb_buffers_alloc(dev) < 0) {
+		printk(KERN_INFO ": Could not allocate buffer memory\n");
+		goto fail2;
+	}
+	if (ddb_ports_attach(dev) < 0)
+		goto fail3;
+	ddb_device_create(dev);
+	return 0;
+
+fail3:
+	ddb_ports_detach(dev);
+	printk(KERN_ERR "fail3\n");
+	ddb_ports_release(dev);
+fail2:
+	printk(KERN_ERR "fail2\n");
+	ddb_buffers_free(dev);
+fail1:
+	printk(KERN_ERR "fail1\n");
+	if (dev->msi)
+		pci_disable_msi(dev->pdev);
+	free_irq(dev->pdev->irq, dev);
+fail:
+	printk(KERN_ERR "fail\n");
+	ddb_unmap(dev);
+	pci_set_drvdata(pdev, 0);
+	pci_disable_device(pdev);
+	return -1;
+}
+
+/******************************************************************************/
+/******************************************************************************/
+/******************************************************************************/
+
+static struct ddb_info ddb_none = {
+	.type     = DDB_NONE,
+	.name     = "Digital Devices PCIe bridge",
+};
+
+static struct ddb_info ddb_octopus = {
+	.type     = DDB_OCTOPUS,
+	.name     = "Digital Devices Octopus DVB adapter",
+	.port_num = 4,
+};
+
+static struct ddb_info ddb_octopus_le = {
+	.type     = DDB_OCTOPUS,
+	.name     = "Digital Devices Octopus LE DVB adapter",
+	.port_num = 2,
+};
+
+static struct ddb_info ddb_v6 = {
+	.type     = DDB_OCTOPUS,
+	.name     = "Digital Devices Cine S2 V6 DVB adapter",
+	.port_num = 3,
+};
+
+#define DDVID 0xdd01 /* Digital Devices Vendor ID */
+
+#define DDB_ID(_vend, _dev, _subvend, _subdev, _driverdata) {	\
+	.vendor      = _vend,    .device    = _dev, \
+	.subvendor   = _subvend, .subdevice = _subdev, \
+	.driver_data = (unsigned long)&_driverdata }
+
+static const struct pci_device_id ddb_id_tbl[] __devinitdata = {
+	DDB_ID(DDVID, 0x0002, DDVID, 0x0001, ddb_octopus),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0001, ddb_octopus),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0002, ddb_octopus_le),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0010, ddb_octopus),
+	DDB_ID(DDVID, 0x0003, DDVID, 0x0020, ddb_v6),
+	/* in case sub-ids got deleted in flash */
+	DDB_ID(DDVID, 0x0003, PCI_ANY_ID, PCI_ANY_ID, ddb_none),
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, ddb_id_tbl);
+
+
+static struct pci_driver ddb_pci_driver = {
+	.name        = "DDBridge",
+	.id_table    = ddb_id_tbl,
+	.probe       = ddb_probe,
+	.remove      = ddb_remove,
+};
+
+static __init int module_init_ddbridge(void)
+{
+	printk(KERN_INFO "Digital Devices PCIE bridge driver, "
+	       "Copyright (C) 2010-11 Digital Devices GmbH\n");
+	if (ddb_class_create())
+		return -1;
+	return pci_register_driver(&ddb_pci_driver);
+}
+
+static __exit void module_exit_ddbridge(void)
+{
+	pci_unregister_driver(&ddb_pci_driver);
+	ddb_class_destroy();
+}
+
+module_init(module_init_ddbridge);
+module_exit(module_exit_ddbridge);
+
+MODULE_DESCRIPTION("Digital Devices PCIe Bridge");
+MODULE_AUTHOR("Ralph Metzler");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.5");
diff --git a/drivers/media/dvb/ddbridge/ddbridge-regs.h b/drivers/media/dvb/ddbridge/ddbridge-regs.h
new file mode 100644
index 00000000000..a3ccb318b50
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/ddbridge-regs.h
@@ -0,0 +1,151 @@
+/*
+ * ddbridge-regs.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* DD-DVBBridgeV1.h 273 2010-09-17 05:03:16Z manfred */
+
+/* Register Definitions */
+
+#define CUR_REGISTERMAP_VERSION 0x10000
+
+#define HARDWARE_VERSION       0x00
+#define REGISTERMAP_VERSION    0x04
+
+/* ------------------------------------------------------------------------- */
+/* SPI Controller */
+
+#define SPI_CONTROL     0x10
+#define SPI_DATA        0x14
+
+/* ------------------------------------------------------------------------- */
+
+/* Interrupt controller                                     */
+/* How many MSI's are available depends on HW (Min 2 max 8) */
+/* How many are usable also depends on Host platform        */
+
+#define INTERRUPT_BASE   (0x40)
+
+#define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
+#define MSI0_ENABLE      (INTERRUPT_BASE + 0x00)
+#define MSI1_ENABLE      (INTERRUPT_BASE + 0x04)
+#define MSI2_ENABLE      (INTERRUPT_BASE + 0x08)
+#define MSI3_ENABLE      (INTERRUPT_BASE + 0x0C)
+#define MSI4_ENABLE      (INTERRUPT_BASE + 0x10)
+#define MSI5_ENABLE      (INTERRUPT_BASE + 0x14)
+#define MSI6_ENABLE      (INTERRUPT_BASE + 0x18)
+#define MSI7_ENABLE      (INTERRUPT_BASE + 0x1C)
+
+#define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
+#define INTERRUPT_ACK    (INTERRUPT_BASE + 0x20)
+
+#define INTMASK_I2C1        (0x00000001)
+#define INTMASK_I2C2        (0x00000002)
+#define INTMASK_I2C3        (0x00000004)
+#define INTMASK_I2C4        (0x00000008)
+
+#define INTMASK_CIRQ1       (0x00000010)
+#define INTMASK_CIRQ2       (0x00000020)
+#define INTMASK_CIRQ3       (0x00000040)
+#define INTMASK_CIRQ4       (0x00000080)
+
+#define INTMASK_TSINPUT1    (0x00000100)
+#define INTMASK_TSINPUT2    (0x00000200)
+#define INTMASK_TSINPUT3    (0x00000400)
+#define INTMASK_TSINPUT4    (0x00000800)
+#define INTMASK_TSINPUT5    (0x00001000)
+#define INTMASK_TSINPUT6    (0x00002000)
+#define INTMASK_TSINPUT7    (0x00004000)
+#define INTMASK_TSINPUT8    (0x00008000)
+
+#define INTMASK_TSOUTPUT1   (0x00010000)
+#define INTMASK_TSOUTPUT2   (0x00020000)
+#define INTMASK_TSOUTPUT3   (0x00040000)
+#define INTMASK_TSOUTPUT4   (0x00080000)
+
+/* ------------------------------------------------------------------------- */
+/* I2C Master Controller */
+
+#define I2C_BASE        (0x80)  /* Byte offset */
+
+#define I2C_COMMAND     (0x00)
+#define I2C_TIMING      (0x04)
+#define I2C_TASKLENGTH  (0x08)     /* High read, low write */
+#define I2C_TASKADDRESS (0x0C)     /* High read, low write */
+
+#define I2C_MONITOR     (0x1C)
+
+#define I2C_BASE_1      (I2C_BASE + 0x00)
+#define I2C_BASE_2      (I2C_BASE + 0x20)
+#define I2C_BASE_3      (I2C_BASE + 0x40)
+#define I2C_BASE_4      (I2C_BASE + 0x60)
+
+#define I2C_BASE_N(i)   (I2C_BASE + (i) * 0x20)
+
+#define I2C_TASKMEM_BASE    (0x1000)    /* Byte offset */
+#define I2C_TASKMEM_SIZE    (0x1000)
+
+#define I2C_SPEED_400   (0x04030404)
+#define I2C_SPEED_200   (0x09080909)
+#define I2C_SPEED_154   (0x0C0B0C0C)
+#define I2C_SPEED_100   (0x13121313)
+#define I2C_SPEED_77    (0x19181919)
+#define I2C_SPEED_50    (0x27262727)
+
+
+/* ------------------------------------------------------------------------- */
+/* DMA  Controller */
+
+#define DMA_BASE_WRITE        (0x100)
+#define DMA_BASE_READ         (0x140)
+
+#define DMA_CONTROL     (0x00)                  /* 64 */
+#define DMA_ERROR       (0x04)                  /* 65 ( only read instance ) */
+
+#define DMA_DIAG_CONTROL                (0x1C)  /* 71 */
+#define DMA_DIAG_PACKETCOUNTER_LOW      (0x20)  /* 72 */
+#define DMA_DIAG_PACKETCOUNTER_HIGH     (0x24)  /* 73 */
+#define DMA_DIAG_TIMECOUNTER_LOW        (0x28)  /* 74 */
+#define DMA_DIAG_TIMECOUNTER_HIGH       (0x2C)  /* 75 */
+#define DMA_DIAG_RECHECKCOUNTER         (0x30)  /* 76  ( Split completions on read ) */
+#define DMA_DIAG_WAITTIMEOUTINIT        (0x34)  /* 77 */
+#define DMA_DIAG_WAITOVERFLOWCOUNTER    (0x38)  /* 78 */
+#define DMA_DIAG_WAITCOUNTER            (0x3C)  /* 79 */
+
+/* ------------------------------------------------------------------------- */
+/* DMA  Buffer */
+
+#define TS_INPUT_BASE       (0x200)
+#define TS_INPUT_CONTROL(i)         (TS_INPUT_BASE + (i) * 16 + 0x00)
+
+#define TS_OUTPUT_BASE       (0x280)
+#define TS_OUTPUT_CONTROL(i)         (TS_OUTPUT_BASE + (i) * 16 + 0x00)
+
+#define DMA_BUFFER_BASE     (0x300)
+
+#define DMA_BUFFER_CONTROL(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x00)
+#define DMA_BUFFER_ACK(i)           (DMA_BUFFER_BASE + (i) * 16 + 0x04)
+#define DMA_BUFFER_CURRENT(i)       (DMA_BUFFER_BASE + (i) * 16 + 0x08)
+#define DMA_BUFFER_SIZE(i)          (DMA_BUFFER_BASE + (i) * 16 + 0x0c)
+
+#define DMA_BASE_ADDRESS_TABLE  (0x2000)
+#define DMA_BASE_ADDRESS_TABLE_ENTRIES (512)
+
diff --git a/drivers/media/dvb/ddbridge/ddbridge.h b/drivers/media/dvb/ddbridge/ddbridge.h
new file mode 100644
index 00000000000..6d14893218f
--- /dev/null
+++ b/drivers/media/dvb/ddbridge/ddbridge.h
@@ -0,0 +1,187 @@
+/*
+ * ddbridge.h: Digital Devices PCIe bridge driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef _DDBRIDGE_H_
+#define _DDBRIDGE_H_
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <asm/dma.h>
+#include <linux/dvb/frontend.h>
+#include <linux/dvb/ca.h>
+#include <linux/dvb/video.h>
+#include <linux/dvb/audio.h>
+#include <linux/socket.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_ringbuffer.h"
+#include "dvb_ca_en50221.h"
+#include "dvb_net.h"
+#include "cxd2099.h"
+
+#define DDB_MAX_I2C     4
+#define DDB_MAX_PORT    4
+#define DDB_MAX_INPUT   8
+#define DDB_MAX_OUTPUT  4
+
+struct ddb_info {
+	int   type;
+#define DDB_NONE         0
+#define DDB_OCTOPUS      1
+	char *name;
+	int   port_num;
+	u32   port_type[DDB_MAX_PORT];
+};
+
+/* DMA_SIZE MUST be divisible by 188 and 128 !!! */
+
+#define INPUT_DMA_MAX_BUFS 32      /* hardware table limit */
+#define INPUT_DMA_BUFS 8
+#define INPUT_DMA_SIZE (128*47*21)
+
+#define OUTPUT_DMA_MAX_BUFS 32
+#define OUTPUT_DMA_BUFS 8
+#define OUTPUT_DMA_SIZE (128*47*21)
+
+struct ddb;
+struct ddb_port;
+
+struct ddb_input {
+	struct ddb_port       *port;
+	u32                    nr;
+	int                    attached;
+
+	dma_addr_t             pbuf[INPUT_DMA_MAX_BUFS];
+	u8                    *vbuf[INPUT_DMA_MAX_BUFS];
+	u32                    dma_buf_num;
+	u32                    dma_buf_size;
+
+	struct tasklet_struct  tasklet;
+	spinlock_t             lock;
+	wait_queue_head_t      wq;
+	int                    running;
+	u32                    stat;
+	u32                    cbuf;
+	u32                    coff;
+
+	struct dvb_adapter     adap;
+	struct dvb_device     *dev;
+	struct dvb_frontend   *fe;
+	struct dvb_frontend   *fe2;
+	struct dmxdev          dmxdev;
+	struct dvb_demux       demux;
+	struct dvb_net         dvbnet;
+	struct dmx_frontend    hw_frontend;
+	struct dmx_frontend    mem_frontend;
+	int                    users;
+	int (*gate_ctrl)(struct dvb_frontend *, int);
+};
+
+struct ddb_output {
+	struct ddb_port       *port;
+	u32                    nr;
+	dma_addr_t             pbuf[OUTPUT_DMA_MAX_BUFS];
+	u8                    *vbuf[OUTPUT_DMA_MAX_BUFS];
+	u32                    dma_buf_num;
+	u32                    dma_buf_size;
+	struct tasklet_struct  tasklet;
+	spinlock_t             lock;
+	wait_queue_head_t      wq;
+	int                    running;
+	u32                    stat;
+	u32                    cbuf;
+	u32                    coff;
+
+	struct dvb_adapter     adap;
+	struct dvb_device     *dev;
+};
+
+struct ddb_i2c {
+	struct ddb            *dev;
+	u32                    nr;
+	struct i2c_adapter     adap;
+	struct i2c_adapter     adap2;
+	u32                    regs;
+	u32                    rbuf;
+	u32                    wbuf;
+	int                    done;
+	wait_queue_head_t      wq;
+};
+
+struct ddb_port {
+	struct ddb            *dev;
+	u32                    nr;
+	struct ddb_i2c        *i2c;
+	struct mutex           i2c_gate_lock;
+	u32                    class;
+#define DDB_PORT_NONE           0
+#define DDB_PORT_CI             1
+#define DDB_PORT_TUNER          2
+	u32                    type;
+#define DDB_TUNER_NONE          0
+#define DDB_TUNER_DVBS_ST       1
+#define DDB_TUNER_DVBS_ST_AA    2
+#define DDB_TUNER_DVBCT_TR     16
+#define DDB_TUNER_DVBCT_ST     17
+	u32                    adr;
+
+	struct ddb_input      *input[2];
+	struct ddb_output     *output;
+	struct dvb_ca_en50221 *en;
+};
+
+struct ddb {
+	struct pci_dev        *pdev;
+	unsigned char         *regs;
+	struct ddb_port        port[DDB_MAX_PORT];
+	struct ddb_i2c         i2c[DDB_MAX_I2C];
+	struct ddb_input       input[DDB_MAX_INPUT];
+	struct ddb_output      output[DDB_MAX_OUTPUT];
+
+	struct device         *ddb_dev;
+	int                    nr;
+	u8                     iobuf[1028];
+
+	struct ddb_info       *info;
+	int                    msi;
+};
+
+/****************************************************************************/
+
+#define ddbwritel(_val, _adr)        writel((_val), \
+				     (char *) (dev->regs+(_adr)))
+#define ddbreadl(_adr)               readl((char *) (dev->regs+(_adr)))
+#define ddbcpyto(_adr, _src, _count) memcpy_toio((char *)	\
+				     (dev->regs+(_adr)), (_src), (_count))
+#define ddbcpyfrom(_dst, _adr, _count) memcpy_fromio((_dst), (char *) \
+				       (dev->regs+(_adr)), (_count))
+
+/****************************************************************************/
+
+#endif
diff --git a/drivers/media/dvb/dvb-core/Makefile b/drivers/media/dvb/dvb-core/Makefile
index 0b5182835cc..8f22bcd7c1f 100644
--- a/drivers/media/dvb/dvb-core/Makefile
+++ b/drivers/media/dvb/dvb-core/Makefile
@@ -2,8 +2,10 @@
 # Makefile for the kernel DVB device drivers.
 #
 
+dvb-net-$(CONFIG_DVB_NET) := dvb_net.o
+
 dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o 	\
 		 dvb_ca_en50221.o dvb_frontend.o 		\
-		 dvb_net.o dvb_ringbuffer.o dvb_math.o
+		 $(dvb-net-y) dvb_ringbuffer.o dvb_math.o
 
 obj-$(CONFIG_DVB_CORE) += dvb-core.o
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 5b6b451d469..efe9c30605e 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -904,7 +904,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
 	.buffer = b \
 }
 
-static struct dtv_cmds_h dtv_cmds[] = {
+static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
 	_DTV_CMD(DTV_TUNE, 1, 0),
 	_DTV_CMD(DTV_CLEAR, 1, 0),
 
@@ -966,6 +966,7 @@ static struct dtv_cmds_h dtv_cmds[] = {
 	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0),
 
 	_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
+	_DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0),
 
 	/* Get */
 	_DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
diff --git a/drivers/media/dvb/dvb-core/dvb_net.h b/drivers/media/dvb/dvb-core/dvb_net.h
index 3a3126cae03..1e53acd50cf 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.h
+++ b/drivers/media/dvb/dvb-core/dvb_net.h
@@ -32,6 +32,8 @@
 
 #define DVB_NET_DEVICES_MAX 10
 
+#ifdef CONFIG_DVB_NET
+
 struct dvb_net {
 	struct dvb_device *dvbdev;
 	struct net_device *device[DVB_NET_DEVICES_MAX];
@@ -40,8 +42,25 @@ struct dvb_net {
 	struct dmx_demux *demux;
 };
 
-
 void dvb_net_release(struct dvb_net *);
 int  dvb_net_init(struct dvb_adapter *, struct dvb_net *, struct dmx_demux *);
 
+#else
+
+struct dvb_net {
+	struct dvb_device *dvbdev;
+};
+
+static inline void dvb_net_release(struct dvb_net *dvbnet)
+{
+}
+
+static inline int dvb_net_init(struct dvb_adapter *adap,
+			       struct dvb_net *dvbnet, struct dmx_demux *dmx)
+{
+	return 0;
+}
+
+#endif /* ifdef CONFIG_DVB_NET */
+
 #endif
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e85304c59a2..5d73dec8ac0 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -81,6 +81,7 @@ config DVB_USB_DIB0700
 	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 100ebc37e99..d7ad05fc383 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -91,7 +91,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	case GET_CONFIG:
 	case READ_MEMORY:
 	case RECONNECT_USB:
-	case GET_IR_CODE:
 		write = 0;
 		break;
 	case READ_I2C:
@@ -164,13 +163,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	deb_xfer("<<< ");
 	debug_dump(buf, act_len, deb_xfer);
 
-	/* remote controller query status is 1 if remote code is not received */
-	if (req->cmd == GET_IR_CODE && buf[1] == 1) {
-		buf[1] = 0; /* clear command "error" status */
-		memset(&buf[2], 0, req->data_len);
-		buf[3] = 1; /* no remote code received mark */
-	}
-
 	/* check status */
 	if (buf[1]) {
 		err("command failed:%d", buf[1]);
@@ -292,6 +284,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 		}
 
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].len > 3 || msg[i+1].len > 61) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
 				af9015_af9013_config[0].demod_address)
 				req.cmd = READ_MEMORY;
@@ -306,12 +302,16 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 			ret = af9015_ctrl_msg(d, &req);
 			i += 2;
 		} else if (msg[i].flags & I2C_M_RD) {
-			ret = -EINVAL;
+			if (msg[i].len > 61) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
-				af9015_af9013_config[0].demod_address)
+				af9015_af9013_config[0].demod_address) {
+				ret = -EINVAL;
 				goto error;
-			else
-				req.cmd = READ_I2C;
+			}
+			req.cmd = READ_I2C;
 			req.i2c_addr = msg[i].addr;
 			req.addr = addr;
 			req.mbox = mbox;
@@ -321,6 +321,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 			ret = af9015_ctrl_msg(d, &req);
 			i += 1;
 		} else {
+			if (msg[i].len > 21) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
 				af9015_af9013_config[0].demod_address)
 				req.cmd = WRITE_MEMORY;
@@ -735,6 +739,7 @@ static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
 	{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
 	{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
 	{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
+	{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
 	{ }
 };
 
@@ -749,6 +754,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
 		RC_MAP_AZUREWAVE_AD_TU700 },
 	{ (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGI_VOX_MINI_III,
 		RC_MAP_MSI_DIGIVOX_III },
+	{ (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGIVOX_DUO,
+		RC_MAP_MSI_DIGIVOX_III },
 	{ (USB_VID_LEADTEK << 16) + USB_PID_WINFAST_DTV_DONGLE_GOLD,
 		RC_MAP_LEADTEK_Y04G0051 },
 	{ (USB_VID_AVERMEDIA << 16) + USB_PID_AVERMEDIA_VOLAR_X,
@@ -759,6 +766,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
 		RC_MAP_DIGITALNOW_TINYTWIN },
 	{ (USB_VID_GTEK << 16) + USB_PID_TINYTWIN_3,
 		RC_MAP_DIGITALNOW_TINYTWIN },
+	{ (USB_VID_KWORLD_2 << 16) + USB_PID_SVEON_STV22,
+		RC_MAP_MSI_DIGIVOX_III },
 	{ }
 };
 
@@ -1082,44 +1091,11 @@ error:
 	return ret;
 }
 
-/* init 2nd I2C adapter */
-static int af9015_i2c_init(struct dvb_usb_device *d)
-{
-	int ret;
-	struct af9015_state *state = d->priv;
-	deb_info("%s:\n", __func__);
-
-	strncpy(state->i2c_adap.name, d->desc->name,
-		sizeof(state->i2c_adap.name));
-	state->i2c_adap.algo      = d->props.i2c_algo;
-	state->i2c_adap.algo_data = NULL;
-	state->i2c_adap.dev.parent = &d->udev->dev;
-
-	i2c_set_adapdata(&state->i2c_adap, d);
-
-	ret = i2c_add_adapter(&state->i2c_adap);
-	if (ret < 0)
-		err("could not add i2c adapter");
-
-	return ret;
-}
-
 static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	int ret;
-	struct af9015_state *state = adap->dev->priv;
-	struct i2c_adapter *i2c_adap;
-
-	if (adap->id == 0) {
-		/* select I2C adapter */
-		i2c_adap = &adap->dev->i2c_adap;
-
-		deb_info("%s: init I2C\n", __func__);
-		ret = af9015_i2c_init(adap->dev);
-	} else {
-		/* select I2C adapter */
-		i2c_adap = &state->i2c_adap;
 
+	if (adap->id == 1) {
 		/* copy firmware to 2nd demodulator */
 		if (af9015_config.dual_mode) {
 			ret = af9015_copy_firmware(adap->dev);
@@ -1136,7 +1112,7 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 
 	/* attach demodulator */
 	adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id],
-		i2c_adap);
+		&adap->dev->i2c_adap);
 
 	return adap->fe == NULL ? -ENODEV : 0;
 }
@@ -1206,57 +1182,56 @@ static struct mxl5007t_config af9015_mxl5007t_config = {
 
 static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	struct af9015_state *state = adap->dev->priv;
-	struct i2c_adapter *i2c_adap;
 	int ret;
 	deb_info("%s:\n", __func__);
 
-	/* select I2C adapter */
-	if (adap->id == 0)
-		i2c_adap = &adap->dev->i2c_adap;
-	else
-		i2c_adap = &state->i2c_adap;
-
 	switch (af9015_af9013_config[adap->id].tuner) {
 	case AF9013_TUNER_MT2060:
 	case AF9013_TUNER_MT2060_2:
-		ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mt2060_attach, adap->fe, &adap->dev->i2c_adap,
 			&af9015_mt2060_config,
 			af9015_config.mt2060_if1[adap->id])
 			== NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_QT1010:
 	case AF9013_TUNER_QT1010A:
-		ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
 			&af9015_qt1010_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_TDA18271:
-		ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap,
+		ret = dvb_attach(tda18271_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap,
 			&af9015_tda18271_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_TDA18218:
-		ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(tda18218_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_tda18218_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5003D:
-		ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5005D:
 	case AF9013_TUNER_MXL5005R:
-		ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_ENV77H11D5:
-		ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap,
+		ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap,
 			DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MC44S803:
-		ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mc44s803_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5007T:
-		ret = dvb_attach(mxl5007t_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5007t_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_UNKNOWN:
@@ -1309,6 +1284,7 @@ static struct usb_device_id af9015_usb_table[] = {
 		USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)},
 /* 35 */{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)},
 	{USB_DEVICE(USB_VID_GTEK,      USB_PID_TINYTWIN_3)},
+	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_SVEON_STV22)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1502,7 +1478,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 9, /* check max from dvb-usb.h */
+		.num_device_descs = 10, /* check max from dvb-usb.h */
 		.devices = {
 			{
 				.name = "Xtensions XD-380",
@@ -1554,6 +1530,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.cold_ids = {&af9015_usb_table[20], NULL},
 				.warm_ids = {NULL},
 			},
+			{
+				.name = "Sveon STV22 Dual USB DVB-T Tuner HDTV",
+				.cold_ids = {&af9015_usb_table[37], NULL},
+				.warm_ids = {NULL},
+			},
 		}
 	}, {
 		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
@@ -1704,33 +1685,11 @@ static int af9015_usb_probe(struct usb_interface *intf,
 	return ret;
 }
 
-static void af9015_i2c_exit(struct dvb_usb_device *d)
-{
-	struct af9015_state *state = d->priv;
-	deb_info("%s:\n", __func__);
-
-	/* remove 2nd I2C adapter */
-	if (d->state & DVB_USB_STATE_I2C)
-		i2c_del_adapter(&state->i2c_adap);
-}
-
-static void af9015_usb_device_exit(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	deb_info("%s:\n", __func__);
-
-	/* remove 2nd I2C adapter */
-	if (d != NULL && d->desc != NULL)
-		af9015_i2c_exit(d);
-
-	dvb_usb_device_exit(intf);
-}
-
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver af9015_usb_driver = {
 	.name = "dvb_usb_af9015",
 	.probe = af9015_usb_probe,
-	.disconnect = af9015_usb_device_exit,
+	.disconnect = dvb_usb_device_exit,
 	.id_table = af9015_usb_table,
 };
 
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index beb3004f00b..6252ea6c190 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -99,7 +99,6 @@ enum af9015_ir_mode {
 };
 
 struct af9015_state {
-	struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */
 	u8 rc_repeat;
 	u32 rc_keycode;
 	u8 rc_last[4];
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 7c327b54308..2cbf19a52e3 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -347,15 +347,17 @@ static struct isl6423_config anysee_isl6423_config = {
  * PCB: ?
  * parts: DNOS404ZH102A(MT352, DTT7579(?))
  *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
- * PCB: ?
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
+ * PCB: PCB 507T (rev1.61)
  * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
+ * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
+ * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
  *
  * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
  * PCB: 507CD (rev1.1)
  * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
- * IOA=4f IOB=ff IOC=00 IOD=06 IOF=01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
  * IOD[0] ZL10353 1=enabled
  * IOA[7] TS 0=enabled
  * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
@@ -363,30 +365,30 @@ static struct isl6423_config anysee_isl6423_config = {
  * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
  * PCB: 507DC (rev0.2)
  * parts: TDA10023, DTOS403IH102B TM, CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
- * IOA=4f IOB=ff IOC=00 IOD=26 IOF=01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
  * IOD[0] TDA10023 1=enabled
  *
  * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
  * PCB: 507SI (rev2.1)
  * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe
- * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
  * IOD[0] CX24116 1=enabled
  *
  * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
  * PCB: 507FA (rev0.4)
  * parts: TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
  * IOD[5] TDA10023 1=enabled
  * IOE[0] tuner 1=enabled
  *
  * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
  * PCB: 507FA (rev1.1)
  * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
  * DVB-C:
  * IOD[5] TDA10023 1=enabled
  * IOE[0] tuner 1=enabled
@@ -398,8 +400,8 @@ static struct isl6423_config anysee_isl6423_config = {
  * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
  * PCB: 508TC (rev0.6)
  * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOF=e4
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
  * IOA[7] TS 1=enabled
  * IOE[4] TDA18212 1=enabled
  * DVB-C:
@@ -414,11 +416,34 @@ static struct isl6423_config anysee_isl6423_config = {
  * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
  * PCB: 508S2 (rev0.7)
  * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOF=e4
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
  * IOA[7] TS 1=enabled
  * IOE[5] STV0903 1=enabled
  *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
  */
 
 static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
@@ -459,7 +484,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 	state->hw = hw_info[0];
 
 	switch (state->hw) {
-	case ANYSEE_HW_02: /* 2 */
+	case ANYSEE_HW_507T: /* 2 */
 		/* E30 */
 
 		/* attach demod */
@@ -593,7 +618,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
 		/* E7 TC */
+		/* E7 PTC */
 
 		/* enable transport stream on IOA[7] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -650,7 +677,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
 		/* E7 S2 */
+		/* E7 PS2 */
 
 		/* enable transport stream on IOA[7] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -687,7 +716,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 	deb_info("%s:\n", __func__);
 
 	switch (state->hw) {
-	case ANYSEE_HW_02: /* 2 */
+	case ANYSEE_HW_507T: /* 2 */
 		/* E30 */
 
 		/* attach tuner */
@@ -762,7 +791,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
 		/* E7 TC */
+		/* E7 PTC */
 
 		/* enable tuner on IOE[4] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
@@ -775,7 +806,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
 		/* E7 S2 */
+		/* E7 PS2 */
 
 		/* attach tuner */
 		fe = dvb_attach(stv6110_attach, adap->fe,
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index a7673aa1e00..ad6ccd1ea2d 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -61,13 +61,15 @@ struct anysee_state {
 	u8 seq;
 };
 
-#define ANYSEE_HW_02     2 /* E30 */
-#define ANYSEE_HW_507CD  6 /* E30 Plus */
-#define ANYSEE_HW_507DC 10 /* E30 C Plus */
-#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
-#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
-#define ANYSEE_HW_508TC 18 /* E7 TC */
-#define ANYSEE_HW_508S2 19 /* E7 S2 */
+#define ANYSEE_HW_507T    2 /* E30 */
+#define ANYSEE_HW_507CD   6 /* E30 Plus */
+#define ANYSEE_HW_507DC  10 /* E30 C Plus */
+#define ANYSEE_HW_507SI  11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA  15 /* E30 Combo Plus / E30 C Plus */
+#define ANYSEE_HW_508TC  18 /* E7 TC */
+#define ANYSEE_HW_508S2  19 /* E7 S2 */
+#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
+#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
 
 #define REG_IOA       0x80 /* Port A (bit addressable) */
 #define REG_IOB       0x90 /* Port B (bit addressable) */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index c519ad5eb73..d0ea5b64f6b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -17,6 +17,7 @@
 #include "mt2266.h"
 #include "tuner-xc2028.h"
 #include "xc5000.h"
+#include "xc4000.h"
 #include "s5h1411.h"
 #include "dib0070.h"
 #include "dib0090.h"
@@ -2655,6 +2656,156 @@ static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
 		== NULL ? -ENODEV : 0;
 }
 
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	if (command == XC4000_TUNER_RESET) {
+		/* Reset the tuner */
+		dib7000p_set_gpio(adap->fe, 8, 0, 0);
+		msleep(10);
+		dib7000p_set_gpio(adap->fe, 8, 0, 1);
+	} else {
+		err("xc4000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF,
+	.setup = 0x64,
+	.inv_gain = 0x02c8,
+	.time_stabiliz = 0x15,
+	.alpha_level = 0x00,
+	.thlock = 0x76,
+	.wbd_inv = 0x01,
+	.wbd_ref = 0x0b33,
+	.wbd_sel = 0x00,
+	.wbd_alpha = 0x02,
+	.agc1_max = 0x00,
+	.agc1_min = 0x00,
+	.agc2_max = 0x9b26,
+	.agc2_min = 0x26ca,
+	.agc1_pt1 = 0x00,
+	.agc1_pt2 = 0x00,
+	.agc1_pt3 = 0x00,
+	.agc1_slope1 = 0x00,
+	.agc1_slope2 = 0x00,
+	.agc2_pt1 = 0x00,
+	.agc2_pt2 = 0x80,
+	.agc2_slope1 = 0x1d,
+	.agc2_slope2 = 0x1d,
+	.alpha_mant = 0x11,
+	.alpha_exp = 0x1b,
+	.beta_mant = 0x17,
+	.beta_exp = 0x33,
+	.perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+	60000, 30000,	/* internal, sampling */
+	1, 8, 3, 1, 0,	/* pll_cfg: prediv, ratio, range, reset, bypass */
+	0, 0, 1, 1, 0,	/* misc: refdiv, bypclk_div, IO_CLK_en_core, */
+			/* ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | 524,	/* sad_cfg: refsel, sel, freq_15k */
+	39370534,	/* ifreq */
+	20452225,	/* timf */
+	30000000	/* xtal */
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_xc4000_agc_config,
+	.bw  = &stk7700p_xc4000_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+   dib0700:
+   GPIO2  - CX25843 sleep
+   GPIO3  - CS5340 reset
+   GPIO5  - IRD
+   GPIO6  - Power Supply
+   GPIO8  - LNA (1=off 0=on)
+   GPIO10 - CX25843 reset
+   dib7000:
+   GPIO8  - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Power Supply on */
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0);
+	msleep(50);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1);
+	msleep(100); /* Allow power supply to settle before probing */
+
+	/* cx25843 reset */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 0);
+	msleep(1); /* cx25843 datasheet say 350us required */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 1);
+
+	/* LNA off for now */
+	dib0700_set_gpio(adap->dev, GPIO8,  GPIO_OUT, 1);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* FIXME: not verified yet */
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(500);
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+		/* Demodulator not found for some reason? */
+		return -ENODEV;
+	}
+
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
+			      &pctv_340e_config);
+	st->is_dib7000pc = 1;
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+	.i2c_address	  = 0x61,
+	.default_pm	  = 1,
+	.dvb_amplitude	  = 0,
+	.set_smoothedcvbs = 0,
+	.if_khz		  = 5400
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+
+	/* The xc4000 is not on the main i2c bus */
+	tun_i2c = dib7000p_get_i2c_master(adap->fe,
+					  DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (tun_i2c == NULL) {
+		printk(KERN_ERR "Could not reach tuner i2c bus\n");
+		return 0;
+	}
+
+	/* Setup the reset callback */
+	adap->fe->callback = dib0700_xc4000_tuner_callback;
+
+	return dvb_attach(xc4000_attach, adap->fe, tun_i2c,
+			  &dib7000p_xc4000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
 static struct lgdt3305_config hcw_lgdt3305_config = {
 	.i2c_addr           = 0x0e,
 	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
@@ -2802,6 +2953,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090PVR) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
 /* 75 */{ USB_DEVICE(USB_VID_MEDION,    USB_PID_CREATIX_CTX1921) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -3772,6 +3925,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = pctv340e_frontend_attach,
+				.tuner_attach     = xc4000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV 340e HD Pro USB Stick",
+				{ &dib0700_usb_id_table[76], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Hybrid Stick Solo",
+				{ &dib0700_usb_id_table[77], NULL },
+				{ NULL },
+			},
+		},
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 21b15495d2d..2a79b8fb3e8 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -230,6 +230,8 @@
 #define USB_PID_PINNACLE_PCTV310E			0x3211
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV340E			0x023d
+#define USB_PID_PINNACLE_PCTV340E_SE			0x023e
 #define USB_PID_PINNACLE_PCTV73A			0x0243
 #define USB_PID_PINNACLE_PCTV73ESE			0x0245
 #define USB_PID_PINNACLE_PCTV74E			0x0246
@@ -313,6 +315,7 @@
 #define USB_PID_FRIIO_WHITE				0x0001
 #define USB_PID_TVWAY_PLUS				0x0002
 #define USB_PID_SVEON_STV20				0xe39d
+#define USB_PID_SVEON_STV22				0xe401
 #define USB_PID_AZUREWAVE_AZ6027			0x3275
 #define USB_PID_TERRATEC_DVBS2CI_V1			0x10a4
 #define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 76a80968482..7d35d078342 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -85,7 +85,7 @@ static inline u8 rc5_data(struct rc_map_table *key)
 	return key->scancode & 0xff;
 }
 
-static inline u8 rc5_scan(struct rc_map_table *key)
+static inline u16 rc5_scan(struct rc_map_table *key)
 {
 	return key->scancode & 0xffff;
 }
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
index 831749a518c..ed32b9da484 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -78,9 +78,6 @@ extern int dvb_usb_gp8psk_debug;
 #define ADV_MOD_DVB_BPSK 9     /* DVB-S BPSK */
 
 #define GET_USB_SPEED                     0x07
- #define USB_SPEED_LOW                    0
- #define USB_SPEED_FULL                   1
- #define USB_SPEED_HIGH                   2
 
 #define RESET_FX2                         0x13
 
diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c
index 08f8842ad28..473b95ed4d5 100644
--- a/drivers/media/dvb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/dvb/dvb-usb/technisat-usb2.c
@@ -765,10 +765,8 @@ static void technisat_usb2_disconnect(struct usb_interface *intf)
 	/* work and stuff was only created when the device is is hot-state */
 	if (dev != NULL) {
 		struct technisat_usb2_state *state = dev->priv;
-		if (state != NULL) {
+		if (state != NULL)
 			cancel_delayed_work_sync(&state->green_led_work);
-			flush_scheduled_work();
-		}
 	}
 
 	dvb_usb_device_exit(intf);
diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h
index 969688f8526..cf5ec46f8bb 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.h
+++ b/drivers/media/dvb/dvb-usb/vp7045.h
@@ -36,9 +36,6 @@
  #define Tuner_Power_OFF                  0
 
 #define GET_USB_SPEED                     0x07
- #define USB_SPEED_LOW                    0
- #define USB_SPEED_FULL                   1
- #define USB_SPEED_HIGH                   2
 
 #define LOCK_TUNER_COMMAND                0x09
 
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
index 21c52e3b522..489ae824586 100644
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ b/drivers/media/dvb/firewire/firedtv-avc.c
@@ -1208,7 +1208,7 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
 	if (r->response != AVC_RESPONSE_ACCEPTED) {
 		dev_err(fdtv->device,
 			"CA PMT failed with response 0x%x\n", r->response);
-		ret = -EFAULT;
+		ret = -EACCES;
 	}
 out:
 	mutex_unlock(&fdtv->avc_mutex);
diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c
index 8ffb565f070..e5ebdbfe8c1 100644
--- a/drivers/media/dvb/firewire/firedtv-ci.c
+++ b/drivers/media/dvb/firewire/firedtv-ci.c
@@ -45,11 +45,6 @@ static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat)
 	return flags;
 }
 
-static int fdtv_ca_reset(struct firedtv *fdtv)
-{
-	return avc_ca_reset(fdtv) ? -EFAULT : 0;
-}
-
 static int fdtv_ca_get_caps(void *arg)
 {
 	struct ca_caps *cap = arg;
@@ -65,12 +60,14 @@ static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg)
 {
 	struct firedtv_tuner_status stat;
 	struct ca_slot_info *slot = arg;
+	int err;
 
-	if (avc_tuner_status(fdtv, &stat))
-		return -EFAULT;
+	err = avc_tuner_status(fdtv, &stat);
+	if (err)
+		return err;
 
 	if (slot->num != 0)
-		return -EFAULT;
+		return -EACCES;
 
 	slot->type = CA_CI;
 	slot->flags = fdtv_get_ca_flags(&stat);
@@ -81,21 +78,21 @@ static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg)
 {
 	struct ca_msg *reply = arg;
 
-	return avc_ca_app_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+	return avc_ca_app_info(fdtv, reply->msg, &reply->length);
 }
 
 static int fdtv_ca_info(struct firedtv *fdtv, void *arg)
 {
 	struct ca_msg *reply = arg;
 
-	return avc_ca_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+	return avc_ca_info(fdtv, reply->msg, &reply->length);
 }
 
 static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg)
 {
 	struct ca_msg *reply = arg;
 
-	return avc_ca_get_mmi(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+	return avc_ca_get_mmi(fdtv, reply->msg, &reply->length);
 }
 
 static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
@@ -111,14 +108,15 @@ static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
 		err = fdtv_ca_info(fdtv, arg);
 		break;
 	default:
-		if (avc_tuner_status(fdtv, &stat))
-			err = -EFAULT;
-		else if (stat.ca_mmi == 1)
+		err = avc_tuner_status(fdtv, &stat);
+		if (err)
+			break;
+		if (stat.ca_mmi == 1)
 			err = fdtv_ca_get_mmi(fdtv, arg);
 		else {
 			dev_info(fdtv->device, "unhandled CA message 0x%08x\n",
 				 fdtv->ca_last_command);
-			err = -EFAULT;
+			err = -EACCES;
 		}
 	}
 	fdtv->ca_last_command = 0;
@@ -141,7 +139,7 @@ static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg)
 		data_length = msg->msg[3];
 	}
 
-	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length) ? -EFAULT : 0;
+	return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length);
 }
 
 static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
@@ -170,7 +168,7 @@ static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
 	default:
 		dev_err(fdtv->device, "unhandled CA message 0x%08x\n",
 			fdtv->ca_last_command);
-		err = -EFAULT;
+		err = -EACCES;
 	}
 	return err;
 }
@@ -184,7 +182,7 @@ static int fdtv_ca_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	switch (cmd) {
 	case CA_RESET:
-		err = fdtv_ca_reset(fdtv);
+		err = avc_ca_reset(fdtv);
 		break;
 	case CA_GET_CAP:
 		err = fdtv_ca_get_caps(arg);
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 44b816f2601..32e08e35152 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -49,6 +49,27 @@ config DVB_STV6110x
 	help
 	  A Silicon tuner that supports DVB-S and DVB-S2 modes
 
+comment "Multistandard (cable + terrestrial) frontends"
+	depends on DVB_CORE
+
+config DVB_DRXK
+	tristate "Micronas DRXK based"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  Micronas DRX-K DVB-C/T demodulator.
+
+	  Say Y when you want to support this frontend.
+
+config DVB_TDA18271C2DD
+	tristate "NXP TDA18271C2 silicon tuner"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  NXP TDA18271 silicon tuner.
+
+	  Say Y when you want to support this tuner.
+
 comment "DVB-S (satellite) frontends"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 2f3a6f736d6..6a6ba053ead 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -10,6 +10,7 @@ stv0900-objs = stv0900_core.o stv0900_sw.o
 au8522-objs = au8522_dig.o au8522_decoder.o
 drxd-objs = drxd_firm.o drxd_hard.o
 cxd2820r-objs = cxd2820r_core.o cxd2820r_c.o cxd2820r_t.o cxd2820r_t2.o
+drxk-objs := drxk_hard.o
 
 obj-$(CONFIG_DVB_PLL) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
@@ -88,4 +89,6 @@ obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o
 obj-$(CONFIG_DVB_IX2505V) += ix2505v.o
 obj-$(CONFIG_DVB_STV0367) += stv0367.o
 obj-$(CONFIG_DVB_CXD2820R) += cxd2820r.o
+obj-$(CONFIG_DVB_DRXK) += drxk.o
+obj-$(CONFIG_DVB_TDA18271C2DD) += tda18271c2dd.o
 
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index b537891a4cc..2b248c12f40 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -692,7 +692,7 @@ static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
 	/* Interrogate the decoder to see if we are getting a real signal */
 	lock_status = au8522_readreg(state, 0x00);
 	if (lock_status == 0xa2)
-		vt->signal = 0x01;
+		vt->signal = 0xffff;
 	else
 		vt->signal = 0x00;
 
diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c
index e9ee55592fd..c341d57d5e8 100644
--- a/drivers/media/dvb/frontends/cx24113.c
+++ b/drivers/media/dvb/frontends/cx24113.c
@@ -31,8 +31,8 @@
 
 static int debug;
 
-#define info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
-#define err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0)
+#define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
+#define cx_err(args...)  do { printk(KERN_ERR  "CX24113: " args); } while (0)
 
 #define dprintk(args...) \
 	do { \
@@ -341,7 +341,7 @@ static void cx24113_calc_pll_nf(struct cx24113_state *state, u16 *n, s32 *f)
 	} while (N < 6 && R < 3);
 
 	if (N < 6) {
-		err("strange frequency: N < 6\n");
+		cx_err("strange frequency: N < 6\n");
 		return;
 	}
 	F = freq_hz;
@@ -563,7 +563,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
 		kzalloc(sizeof(struct cx24113_state), GFP_KERNEL);
 	int rc;
 	if (state == NULL) {
-		err("Unable to kzalloc\n");
+		cx_err("Unable to kzalloc\n");
 		goto error;
 	}
 
@@ -571,7 +571,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
 	state->config = config;
 	state->i2c = i2c;
 
-	info("trying to detect myself\n");
+	cx_info("trying to detect myself\n");
 
 	/* making a dummy read, because of some expected troubles
 	 * after power on */
@@ -579,24 +579,24 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,
 
 	rc = cx24113_readreg(state, 0x00);
 	if (rc < 0) {
-		info("CX24113 not found.\n");
+		cx_info("CX24113 not found.\n");
 		goto error;
 	}
 	state->rev = rc;
 
 	switch (rc) {
 	case 0x43:
-		info("detected CX24113 variant\n");
+		cx_info("detected CX24113 variant\n");
 		break;
 	case REV_CX24113:
-		info("successfully detected\n");
+		cx_info("successfully detected\n");
 		break;
 	default:
-		err("unsupported device id: %x\n", state->rev);
+		cx_err("unsupported device id: %x\n", state->rev);
 		goto error;
 	}
 	state->ver = cx24113_readreg(state, 0x01);
-	info("version: %x\n", state->ver);
+	cx_info("version: %x\n", state->ver);
 
 	/* create dvb_frontend */
 	memcpy(&fe->ops.tuner_ops, &cx24113_tuner_ops,
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
index 95c6465b87a..ccd05255d52 100644
--- a/drivers/media/dvb/frontends/cx24116.c
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -1452,11 +1452,7 @@ tuned:  /* Set/Reset B/W */
 	cmd.args[0x00] = CMD_BANDWIDTH;
 	cmd.args[0x01] = 0x00;
 	cmd.len = 0x02;
-	ret = cx24116_cmd_execute(fe, &cmd);
-	if (ret != 0)
-		return ret;
-
-	return ret;
+	return cx24116_cmd_execute(fe, &cmd);
 }
 
 static int cx24116_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *params,
diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h
index ad17845123d..2906582dc94 100644
--- a/drivers/media/dvb/frontends/cxd2820r.h
+++ b/drivers/media/dvb/frontends/cxd2820r.h
@@ -55,13 +55,13 @@ struct cxd2820r_config {
 	 * Default: 0
 	 * Values: 0, 1
 	 */
-	int if_agc_polarity:1;
+	bool if_agc_polarity;
 
 	/* Spectrum inversion.
 	 * Default: 0
 	 * Values: 0, 1
 	 */
-	int spec_inv:1;
+	bool spec_inv;
 
 	/* IFs for all used modes.
 	 * Default: none, must set
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
index 0779f69db79..d416e85589e 100644
--- a/drivers/media/dvb/frontends/cxd2820r_core.c
+++ b/drivers/media/dvb/frontends/cxd2820r_core.c
@@ -314,6 +314,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe,
 			} else if (c->delivery_system == SYS_DVBT2) {
 				/* DVB-T => DVB-T2 */
 				ret = cxd2820r_sleep_t(fe);
+				if (ret)
+					break;
 				ret = cxd2820r_set_frontend_t2(fe, p);
 			}
 			break;
@@ -324,6 +326,8 @@ static int cxd2820r_set_frontend(struct dvb_frontend *fe,
 			} else if (c->delivery_system == SYS_DVBT) {
 				/* DVB-T2 => DVB-T */
 				ret = cxd2820r_sleep_t2(fe);
+				if (ret)
+					break;
 				ret = cxd2820r_set_frontend_t(fe, p);
 			}
 			break;
@@ -740,12 +744,13 @@ static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap,
 	struct i2c_msg msg[], int num)
 {
 	struct cxd2820r_priv *priv = i2c_get_adapdata(i2c_adap);
-	u8 obuf[msg[0].len + 2];
+	int ret;
+	u8 *obuf = kmalloc(msg[0].len + 2, GFP_KERNEL);
 	struct i2c_msg msg2[2] = {
 		{
 			.addr = priv->cfg.i2c_address,
 			.flags = 0,
-			.len = sizeof(obuf),
+			.len = msg[0].len + 2,
 			.buf = obuf,
 		}, {
 			.addr = priv->cfg.i2c_address,
@@ -755,15 +760,24 @@ static int cxd2820r_tuner_i2c_xfer(struct i2c_adapter *i2c_adap,
 		}
 	};
 
+	if (!obuf)
+		return -ENOMEM;
+
 	obuf[0] = 0x09;
 	obuf[1] = (msg[0].addr << 1);
 	if (num == 2) { /* I2C read */
 		obuf[1] = (msg[0].addr << 1) | I2C_M_RD; /* I2C RD flag */
-		msg2[0].len = sizeof(obuf) - 1; /* maybe HW bug ? */
+		msg2[0].len = msg[0].len + 2 - 1; /* '-1' maybe HW bug ? */
 	}
 	memcpy(&obuf[2], msg[0].buf, msg[0].len);
 
-	return i2c_transfer(priv->i2c, msg2, num);
+	ret = i2c_transfer(priv->i2c, msg2, num);
+	if (ret < 0)
+		warn("tuner i2c failed ret:%d", ret);
+
+	kfree(obuf);
+
+	return ret;
 }
 
 static struct i2c_algorithm cxd2820r_tuner_i2c_algo = {
diff --git a/drivers/media/dvb/frontends/cxd2820r_priv.h b/drivers/media/dvb/frontends/cxd2820r_priv.h
index 25adbeefa6d..0c0ebc9d5c4 100644
--- a/drivers/media/dvb/frontends/cxd2820r_priv.h
+++ b/drivers/media/dvb/frontends/cxd2820r_priv.h
@@ -55,13 +55,13 @@ struct cxd2820r_priv {
 	struct mutex fe_lock; /* FE lock */
 	int active_fe:2; /* FE lock, -1=NONE, 0=DVB-T/T2, 1=DVB-C */
 
-	int ber_running:1;
+	bool ber_running;
 
 	u8 bank[2];
 	u8 gpio[3];
 
 	fe_delivery_system_t delivery_system;
-	int last_tune_failed:1; /* for switch between T and T2 tune */
+	bool last_tune_failed; /* for switch between T and T2 tune */
 };
 
 /* cxd2820r_core.c */
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 0c9f40c2a25..a64a538ba36 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -2336,6 +2336,11 @@ struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
 		request_firmware() will hit an OOPS (this should be moved somewhere
 		more common) */
 
+	/* FIXME: make sure the dev.parent field is initialized, or else
+	   request_firmware() will hit an OOPS (this should be moved somewhere
+	   more common) */
+	st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;
+
 	dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
 
 	/* init 7090 tuner adapter */
diff --git a/drivers/media/dvb/frontends/drxd_hard.c b/drivers/media/dvb/frontends/drxd_hard.c
index ea4c1c361d2..2238bf0be95 100644
--- a/drivers/media/dvb/frontends/drxd_hard.c
+++ b/drivers/media/dvb/frontends/drxd_hard.c
@@ -28,7 +28,6 @@
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <asm/div64.h>
 
 #include "dvb_frontend.h"
@@ -233,7 +232,7 @@ static int i2c_read(struct i2c_adapter *adap,
 	return 0;
 }
 
-inline u32 MulDiv32(u32 a, u32 b, u32 c)
+static inline u32 MulDiv32(u32 a, u32 b, u32 c)
 {
 	u64 tmp64;
 
@@ -910,14 +909,16 @@ static int load_firmware(struct drxd_state *state, const char *fw_name)
 		return -EIO;
 	}
 
-	state->microcode = kzalloc(fw->size, GFP_KERNEL);
+	state->microcode = kmalloc(fw->size, GFP_KERNEL);
 	if (state->microcode == NULL) {
-		printk(KERN_ERR "drxd: firmware load failure: nomemory\n");
+		release_firmware(fw);
+		printk(KERN_ERR "drxd: firmware load failure: no memory\n");
 		return -ENOMEM;
 	}
 
 	memcpy(state->microcode, fw->data, fw->size);
 	state->microcode_length = fw->size;
+	release_firmware(fw);
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
new file mode 100644
index 00000000000..58baf419560
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk.h
@@ -0,0 +1,47 @@
+#ifndef _DRXK_H_
+#define _DRXK_H_
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/**
+ * struct drxk_config - Configure the initial parameters for DRX-K
+ *
+ * adr:			I2C Address of the DRX-K
+ * single_master:	Device is on the single master mode
+ * no_i2c_bridge:	Don't switch the I2C bridge to talk with tuner
+ * antenna_gpio:	GPIO bit used to control the antenna
+ * antenna_dvbt:	GPIO bit for changing antenna to DVB-C. A value of 1
+ *			means that 1=DVBC, 0 = DVBT. Zero means the opposite.
+ * microcode_name:	Name of the firmware file with the microcode
+ *
+ * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
+ * UIO-3.
+ */
+struct drxk_config {
+	u8	adr;
+	bool	single_master;
+	bool	no_i2c_bridge;
+
+	bool	antenna_dvbt;
+	u16	antenna_gpio;
+
+	const char *microcode_name;
+};
+
+#if defined(CONFIG_DVB_DRXK) || (defined(CONFIG_DVB_DRXK_MODULE) \
+        && defined(MODULE))
+extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
+					struct i2c_adapter *i2c,
+					struct dvb_frontend **fe_t);
+#else
+static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
+					struct i2c_adapter *i2c,
+					struct dvb_frontend **fe_t)
+{
+        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+        return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
new file mode 100644
index 00000000000..41b083820da
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -0,0 +1,6454 @@
+/*
+ * drxk_hard: DRX-K DVB-C/T demodulator driver
+ *
+ * Copyright (C) 2010-2011 Digital Devices GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/version.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "drxk.h"
+#include "drxk_hard.h"
+
+static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode);
+static int PowerDownQAM(struct drxk_state *state);
+static int SetDVBTStandard(struct drxk_state *state,
+			   enum OperationMode oMode);
+static int SetQAMStandard(struct drxk_state *state,
+			  enum OperationMode oMode);
+static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz,
+		  s32 tunerFreqOffset);
+static int SetDVBTStandard(struct drxk_state *state,
+			   enum OperationMode oMode);
+static int DVBTStart(struct drxk_state *state);
+static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz,
+		   s32 tunerFreqOffset);
+static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus);
+static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus);
+static int SwitchAntennaToQAM(struct drxk_state *state);
+static int SwitchAntennaToDVBT(struct drxk_state *state);
+
+static bool IsDVBT(struct drxk_state *state)
+{
+	return state->m_OperationMode == OM_DVBT;
+}
+
+static bool IsQAM(struct drxk_state *state)
+{
+	return state->m_OperationMode == OM_QAM_ITU_A ||
+	    state->m_OperationMode == OM_QAM_ITU_B ||
+	    state->m_OperationMode == OM_QAM_ITU_C;
+}
+
+bool IsA1WithPatchCode(struct drxk_state *state)
+{
+	return state->m_DRXK_A1_PATCH_CODE;
+}
+
+bool IsA1WithRomCode(struct drxk_state *state)
+{
+	return state->m_DRXK_A1_ROM_CODE;
+}
+
+#define NOA1ROM 0
+
+#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0)
+#define DRXDAP_FASI_LONG_FORMAT(addr)  (((addr) & 0xFC30FF80) != 0)
+
+#define DEFAULT_MER_83  165
+#define DEFAULT_MER_93  250
+
+#ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH
+#define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02)
+#endif
+
+#ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH
+#define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
+#endif
+
+#ifndef DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH
+#define DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH (0x06)
+#endif
+
+#define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
+#define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
+
+#ifndef DRXK_KI_RAGC_ATV
+#define DRXK_KI_RAGC_ATV   4
+#endif
+#ifndef DRXK_KI_IAGC_ATV
+#define DRXK_KI_IAGC_ATV   6
+#endif
+#ifndef DRXK_KI_DAGC_ATV
+#define DRXK_KI_DAGC_ATV   7
+#endif
+
+#ifndef DRXK_KI_RAGC_QAM
+#define DRXK_KI_RAGC_QAM   3
+#endif
+#ifndef DRXK_KI_IAGC_QAM
+#define DRXK_KI_IAGC_QAM   4
+#endif
+#ifndef DRXK_KI_DAGC_QAM
+#define DRXK_KI_DAGC_QAM   7
+#endif
+#ifndef DRXK_KI_RAGC_DVBT
+#define DRXK_KI_RAGC_DVBT  (IsA1WithPatchCode(state) ? 3 : 2)
+#endif
+#ifndef DRXK_KI_IAGC_DVBT
+#define DRXK_KI_IAGC_DVBT  (IsA1WithPatchCode(state) ? 4 : 2)
+#endif
+#ifndef DRXK_KI_DAGC_DVBT
+#define DRXK_KI_DAGC_DVBT  (IsA1WithPatchCode(state) ? 10 : 7)
+#endif
+
+#ifndef DRXK_AGC_DAC_OFFSET
+#define DRXK_AGC_DAC_OFFSET (0x800)
+#endif
+
+#ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ
+#define DRXK_BANDWIDTH_8MHZ_IN_HZ  (0x8B8249L)
+#endif
+
+#ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ
+#define DRXK_BANDWIDTH_7MHZ_IN_HZ  (0x7A1200L)
+#endif
+
+#ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ
+#define DRXK_BANDWIDTH_6MHZ_IN_HZ  (0x68A1B6L)
+#endif
+
+#ifndef DRXK_QAM_SYMBOLRATE_MAX
+#define DRXK_QAM_SYMBOLRATE_MAX         (7233000)
+#endif
+
+#define DRXK_BL_ROM_OFFSET_TAPS_DVBT    56
+#define DRXK_BL_ROM_OFFSET_TAPS_ITU_A   64
+#define DRXK_BL_ROM_OFFSET_TAPS_ITU_C   0x5FE0
+#define DRXK_BL_ROM_OFFSET_TAPS_BG      24
+#define DRXK_BL_ROM_OFFSET_TAPS_DKILLP  32
+#define DRXK_BL_ROM_OFFSET_TAPS_NTSC    40
+#define DRXK_BL_ROM_OFFSET_TAPS_FM      48
+#define DRXK_BL_ROM_OFFSET_UCODE        0
+
+#define DRXK_BLC_TIMEOUT                100
+
+#define DRXK_BLCC_NR_ELEMENTS_TAPS      2
+#define DRXK_BLCC_NR_ELEMENTS_UCODE     6
+
+#define DRXK_BLDC_NR_ELEMENTS_TAPS      28
+
+#ifndef DRXK_OFDM_NE_NOTCH_WIDTH
+#define DRXK_OFDM_NE_NOTCH_WIDTH             (4)
+#endif
+
+#define DRXK_QAM_SL_SIG_POWER_QAM16       (40960)
+#define DRXK_QAM_SL_SIG_POWER_QAM32       (20480)
+#define DRXK_QAM_SL_SIG_POWER_QAM64       (43008)
+#define DRXK_QAM_SL_SIG_POWER_QAM128      (20992)
+#define DRXK_QAM_SL_SIG_POWER_QAM256      (43520)
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+#define dprintk(level, fmt, arg...) do {			\
+if (debug >= level)						\
+	printk(KERN_DEBUG "drxk: %s" fmt, __func__, ## arg);	\
+} while (0)
+
+
+static inline u32 MulDiv32(u32 a, u32 b, u32 c)
+{
+	u64 tmp64;
+
+	tmp64 = (u64) a * (u64) b;
+	do_div(tmp64, c);
+
+	return (u32) tmp64;
+}
+
+inline u32 Frac28a(u32 a, u32 c)
+{
+	int i = 0;
+	u32 Q1 = 0;
+	u32 R0 = 0;
+
+	R0 = (a % c) << 4;	/* 32-28 == 4 shifts possible at max */
+	Q1 = a / c;		/* integer part, only the 4 least significant bits
+				   will be visible in the result */
+
+	/* division using radix 16, 7 nibbles in the result */
+	for (i = 0; i < 7; i++) {
+		Q1 = (Q1 << 4) | (R0 / c);
+		R0 = (R0 % c) << 4;
+	}
+	/* rounding */
+	if ((R0 >> 3) >= c)
+		Q1++;
+
+	return Q1;
+}
+
+static u32 Log10Times100(u32 x)
+{
+	static const u8 scale = 15;
+	static const u8 indexWidth = 5;
+	u8 i = 0;
+	u32 y = 0;
+	u32 d = 0;
+	u32 k = 0;
+	u32 r = 0;
+	/*
+	   log2lut[n] = (1<<scale) * 200 * log2(1.0 + ((1.0/(1<<INDEXWIDTH)) * n))
+	   0 <= n < ((1<<INDEXWIDTH)+1)
+	 */
+
+	static const u32 log2lut[] = {
+		0,		/* 0.000000 */
+		290941,		/* 290941.300628 */
+		573196,		/* 573196.476418 */
+		847269,		/* 847269.179851 */
+		1113620,	/* 1113620.489452 */
+		1372674,	/* 1372673.576986 */
+		1624818,	/* 1624817.752104 */
+		1870412,	/* 1870411.981536 */
+		2109788,	/* 2109787.962654 */
+		2343253,	/* 2343252.817465 */
+		2571091,	/* 2571091.461923 */
+		2793569,	/* 2793568.696416 */
+		3010931,	/* 3010931.055901 */
+		3223408,	/* 3223408.452106 */
+		3431216,	/* 3431215.635215 */
+		3634553,	/* 3634553.498355 */
+		3833610,	/* 3833610.244726 */
+		4028562,	/* 4028562.434393 */
+		4219576,	/* 4219575.925308 */
+		4406807,	/* 4406806.721144 */
+		4590402,	/* 4590401.736809 */
+		4770499,	/* 4770499.491025 */
+		4947231,	/* 4947230.734179 */
+		5120719,	/* 5120719.018555 */
+		5291081,	/* 5291081.217197 */
+		5458428,	/* 5458427.996830 */
+		5622864,	/* 5622864.249668 */
+		5784489,	/* 5784489.488298 */
+		5943398,	/* 5943398.207380 */
+		6099680,	/* 6099680.215452 */
+		6253421,	/* 6253420.939751 */
+		6404702,	/* 6404701.706649 */
+		6553600,	/* 6553600.000000 */
+	};
+
+
+	if (x == 0)
+		return 0;
+
+	/* Scale x (normalize) */
+	/* computing y in log(x/y) = log(x) - log(y) */
+	if ((x & ((0xffffffff) << (scale + 1))) == 0) {
+		for (k = scale; k > 0; k--) {
+			if (x & (((u32) 1) << scale))
+				break;
+			x <<= 1;
+		}
+	} else {
+		for (k = scale; k < 31; k++) {
+			if ((x & (((u32) (-1)) << (scale + 1))) == 0)
+				break;
+			x >>= 1;
+		}
+	}
+	/*
+	   Now x has binary point between bit[scale] and bit[scale-1]
+	   and 1.0 <= x < 2.0 */
+
+	/* correction for divison: log(x) = log(x/y)+log(y) */
+	y = k * ((((u32) 1) << scale) * 200);
+
+	/* remove integer part */
+	x &= ((((u32) 1) << scale) - 1);
+	/* get index */
+	i = (u8) (x >> (scale - indexWidth));
+	/* compute delta (x - a) */
+	d = x & ((((u32) 1) << (scale - indexWidth)) - 1);
+	/* compute log, multiplication (d* (..)) must be within range ! */
+	y += log2lut[i] +
+	    ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - indexWidth));
+	/* Conver to log10() */
+	y /= 108853;		/* (log2(10) << scale) */
+	r = (y >> 1);
+	/* rounding */
+	if (y & ((u32) 1))
+		r++;
+	return r;
+}
+
+/****************************************************************************/
+/* I2C **********************************************************************/
+/****************************************************************************/
+
+static int i2c_read1(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+	struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD,
+				    .buf = val, .len = 1}
+	};
+
+	return i2c_transfer(adapter, msgs, 1);
+}
+
+static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
+{
+	int status;
+	struct i2c_msg msg = {
+	    .addr = adr, .flags = 0, .buf = data, .len = len };
+
+	dprintk(3, ":");
+	if (debug > 2) {
+		int i;
+		for (i = 0; i < len; i++)
+			printk(KERN_CONT " %02x", data[i]);
+		printk(KERN_CONT "\n");
+	}
+	status = i2c_transfer(adap, &msg, 1);
+	if (status >= 0 && status != 1)
+		status = -EIO;
+
+	if (status < 0)
+		printk(KERN_ERR "drxk: i2c write error at addr 0x%02x\n", adr);
+
+	return status;
+}
+
+static int i2c_read(struct i2c_adapter *adap,
+		    u8 adr, u8 *msg, int len, u8 *answ, int alen)
+{
+	int status;
+	struct i2c_msg msgs[2] = {
+		{.addr = adr, .flags = 0,
+				    .buf = msg, .len = len},
+		{.addr = adr, .flags = I2C_M_RD,
+		 .buf = answ, .len = alen}
+	};
+
+	status = i2c_transfer(adap, msgs, 2);
+	if (status != 2) {
+		if (debug > 2)
+			printk(KERN_CONT ": ERROR!\n");
+		if (status >= 0)
+			status = -EIO;
+
+		printk(KERN_ERR "drxk: i2c read error at addr 0x%02x\n", adr);
+		return status;
+	}
+	if (debug > 2) {
+		int i;
+		dprintk(2, ": read from ");
+		for (i = 0; i < len; i++)
+			printk(KERN_CONT " %02x", msg[i]);
+		printk(KERN_CONT "Value = ");
+		for (i = 0; i < alen; i++)
+			printk(KERN_CONT " %02x", answ[i]);
+		printk(KERN_CONT "\n");
+	}
+	return 0;
+}
+
+static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags)
+{
+	int status;
+	u8 adr = state->demod_address, mm1[4], mm2[2], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm1[1] = ((reg >> 16) & 0xFF);
+		mm1[2] = ((reg >> 24) & 0xFF) | flags;
+		mm1[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm1[0] = ((reg << 1) & 0xFF);
+		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
+	status = i2c_read(state->i2c, adr, mm1, len, mm2, 2);
+	if (status < 0)
+		return status;
+	if (data)
+		*data = mm2[0] | (mm2[1] << 8);
+
+	return 0;
+}
+
+static int read16(struct drxk_state *state, u32 reg, u16 *data)
+{
+	return read16_flags(state, reg, data, 0);
+}
+
+static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags)
+{
+	int status;
+	u8 adr = state->demod_address, mm1[4], mm2[4], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm1[1] = ((reg >> 16) & 0xFF);
+		mm1[2] = ((reg >> 24) & 0xFF) | flags;
+		mm1[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm1[0] = ((reg << 1) & 0xFF);
+		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
+	status = i2c_read(state->i2c, adr, mm1, len, mm2, 4);
+	if (status < 0)
+		return status;
+	if (data)
+		*data = mm2[0] | (mm2[1] << 8) |
+		    (mm2[2] << 16) | (mm2[3] << 24);
+
+	return 0;
+}
+
+static int read32(struct drxk_state *state, u32 reg, u32 *data)
+{
+	return read32_flags(state, reg, data, 0);
+}
+
+static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags)
+{
+	u8 adr = state->demod_address, mm[6], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm[1] = ((reg >> 16) & 0xFF);
+		mm[2] = ((reg >> 24) & 0xFF) | flags;
+		mm[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm[0] = ((reg << 1) & 0xFF);
+		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	mm[len] = data & 0xff;
+	mm[len + 1] = (data >> 8) & 0xff;
+
+	dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags);
+	return i2c_write(state->i2c, adr, mm, len + 2);
+}
+
+static int write16(struct drxk_state *state, u32 reg, u16 data)
+{
+	return write16_flags(state, reg, data, 0);
+}
+
+static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags)
+{
+	u8 adr = state->demod_address, mm[8], len;
+
+	if (state->single_master)
+		flags |= 0xC0;
+	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
+		mm[0] = (((reg << 1) & 0xFF) | 0x01);
+		mm[1] = ((reg >> 16) & 0xFF);
+		mm[2] = ((reg >> 24) & 0xFF) | flags;
+		mm[3] = ((reg >> 7) & 0xFF);
+		len = 4;
+	} else {
+		mm[0] = ((reg << 1) & 0xFF);
+		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
+		len = 2;
+	}
+	mm[len] = data & 0xff;
+	mm[len + 1] = (data >> 8) & 0xff;
+	mm[len + 2] = (data >> 16) & 0xff;
+	mm[len + 3] = (data >> 24) & 0xff;
+	dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags);
+
+	return i2c_write(state->i2c, adr, mm, len + 4);
+}
+
+static int write32(struct drxk_state *state, u32 reg, u32 data)
+{
+	return write32_flags(state, reg, data, 0);
+}
+
+static int write_block(struct drxk_state *state, u32 Address,
+		      const int BlockSize, const u8 pBlock[])
+{
+	int status = 0, BlkSize = BlockSize;
+	u8 Flags = 0;
+
+	if (state->single_master)
+		Flags |= 0xC0;
+
+	while (BlkSize > 0) {
+		int Chunk = BlkSize > state->m_ChunkSize ?
+		    state->m_ChunkSize : BlkSize;
+		u8 *AdrBuf = &state->Chunk[0];
+		u32 AdrLength = 0;
+
+		if (DRXDAP_FASI_LONG_FORMAT(Address) || (Flags != 0)) {
+			AdrBuf[0] = (((Address << 1) & 0xFF) | 0x01);
+			AdrBuf[1] = ((Address >> 16) & 0xFF);
+			AdrBuf[2] = ((Address >> 24) & 0xFF);
+			AdrBuf[3] = ((Address >> 7) & 0xFF);
+			AdrBuf[2] |= Flags;
+			AdrLength = 4;
+			if (Chunk == state->m_ChunkSize)
+				Chunk -= 2;
+		} else {
+			AdrBuf[0] = ((Address << 1) & 0xFF);
+			AdrBuf[1] = (((Address >> 16) & 0x0F) |
+				     ((Address >> 18) & 0xF0));
+			AdrLength = 2;
+		}
+		memcpy(&state->Chunk[AdrLength], pBlock, Chunk);
+		dprintk(2, "(0x%08x, 0x%02x)\n", Address, Flags);
+		if (debug > 1) {
+			int i;
+			if (pBlock)
+				for (i = 0; i < Chunk; i++)
+					printk(KERN_CONT " %02x", pBlock[i]);
+			printk(KERN_CONT "\n");
+		}
+		status = i2c_write(state->i2c, state->demod_address,
+				   &state->Chunk[0], Chunk + AdrLength);
+		if (status < 0) {
+			printk(KERN_ERR "drxk: %s: i2c write error at addr 0x%02x\n",
+			       __func__, Address);
+			break;
+		}
+		pBlock += Chunk;
+		Address += (Chunk >> 1);
+		BlkSize -= Chunk;
+	}
+	return status;
+}
+
+#ifndef DRXK_MAX_RETRIES_POWERUP
+#define DRXK_MAX_RETRIES_POWERUP 20
+#endif
+
+int PowerUpDevice(struct drxk_state *state)
+{
+	int status;
+	u8 data = 0;
+	u16 retryCount = 0;
+
+	dprintk(1, "\n");
+
+	status = i2c_read1(state->i2c, state->demod_address, &data);
+	if (status < 0) {
+		do {
+			data = 0;
+			status = i2c_write(state->i2c, state->demod_address,
+					   &data, 1);
+			msleep(10);
+			retryCount++;
+			if (status < 0)
+				continue;
+			status = i2c_read1(state->i2c, state->demod_address,
+					   &data);
+		} while (status < 0 &&
+			 (retryCount < DRXK_MAX_RETRIES_POWERUP));
+		if (status < 0 && retryCount >= DRXK_MAX_RETRIES_POWERUP)
+			goto error;
+	}
+
+	/* Make sure all clk domains are active */
+	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+	if (status < 0)
+		goto error;
+	/* Enable pll lock tests */
+	status = write16(state, SIO_CC_PLL_LOCK__A, 1);
+	if (status < 0)
+		goto error;
+
+	state->m_currentPowerMode = DRX_POWER_UP;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+
+static int init_state(struct drxk_state *state)
+{
+	/*
+	 * FIXME: most (all?) of the values bellow should be moved into
+	 * struct drxk_config, as they are probably board-specific
+	 */
+	u32 ulVSBIfAgcMode = DRXK_AGC_CTRL_AUTO;
+	u32 ulVSBIfAgcOutputLevel = 0;
+	u32 ulVSBIfAgcMinLevel = 0;
+	u32 ulVSBIfAgcMaxLevel = 0x7FFF;
+	u32 ulVSBIfAgcSpeed = 3;
+
+	u32 ulVSBRfAgcMode = DRXK_AGC_CTRL_AUTO;
+	u32 ulVSBRfAgcOutputLevel = 0;
+	u32 ulVSBRfAgcMinLevel = 0;
+	u32 ulVSBRfAgcMaxLevel = 0x7FFF;
+	u32 ulVSBRfAgcSpeed = 3;
+	u32 ulVSBRfAgcTop = 9500;
+	u32 ulVSBRfAgcCutOffCurrent = 4000;
+
+	u32 ulATVIfAgcMode = DRXK_AGC_CTRL_AUTO;
+	u32 ulATVIfAgcOutputLevel = 0;
+	u32 ulATVIfAgcMinLevel = 0;
+	u32 ulATVIfAgcMaxLevel = 0;
+	u32 ulATVIfAgcSpeed = 3;
+
+	u32 ulATVRfAgcMode = DRXK_AGC_CTRL_OFF;
+	u32 ulATVRfAgcOutputLevel = 0;
+	u32 ulATVRfAgcMinLevel = 0;
+	u32 ulATVRfAgcMaxLevel = 0;
+	u32 ulATVRfAgcTop = 9500;
+	u32 ulATVRfAgcCutOffCurrent = 4000;
+	u32 ulATVRfAgcSpeed = 3;
+
+	u32 ulQual83 = DEFAULT_MER_83;
+	u32 ulQual93 = DEFAULT_MER_93;
+
+	u32 ulDVBTStaticTSClock = 1;
+	u32 ulDVBCStaticTSClock = 1;
+
+	u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
+	u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
+
+	/* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */
+	/* io_pad_cfg_mode output mode is drive always */
+	/* io_pad_cfg_drive is set to power 2 (23 mA) */
+	u32 ulGPIOCfg = 0x0113;
+	u32 ulSerialMode = 1;
+	u32 ulInvertTSClock = 0;
+	u32 ulTSDataStrength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
+	u32 ulTSClockkStrength = DRXK_MPEG_OUTPUT_CLK_DRIVE_STRENGTH;
+	u32 ulDVBTBitrate = 50000000;
+	u32 ulDVBCBitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
+
+	u32 ulInsertRSByte = 0;
+
+	u32 ulRfMirror = 1;
+	u32 ulPowerDown = 0;
+
+	dprintk(1, "\n");
+
+	state->m_hasLNA = false;
+	state->m_hasDVBT = false;
+	state->m_hasDVBC = false;
+	state->m_hasATV = false;
+	state->m_hasOOB = false;
+	state->m_hasAudio = false;
+
+	state->m_ChunkSize = 124;
+
+	state->m_oscClockFreq = 0;
+	state->m_smartAntInverted = false;
+	state->m_bPDownOpenBridge = false;
+
+	/* real system clock frequency in kHz */
+	state->m_sysClockFreq = 151875;
+	/* Timing div, 250ns/Psys */
+	/* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */
+	state->m_HICfgTimingDiv = ((state->m_sysClockFreq / 1000) *
+				   HI_I2C_DELAY) / 1000;
+	/* Clipping */
+	if (state->m_HICfgTimingDiv > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M)
+		state->m_HICfgTimingDiv = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M;
+	state->m_HICfgWakeUpKey = (state->demod_address << 1);
+	/* port/bridge/power down ctrl */
+	state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
+
+	state->m_bPowerDown = (ulPowerDown != 0);
+
+	state->m_DRXK_A1_PATCH_CODE = false;
+	state->m_DRXK_A1_ROM_CODE = false;
+	state->m_DRXK_A2_ROM_CODE = false;
+	state->m_DRXK_A3_ROM_CODE = false;
+	state->m_DRXK_A2_PATCH_CODE = false;
+	state->m_DRXK_A3_PATCH_CODE = false;
+
+	/* Init AGC and PGA parameters */
+	/* VSB IF */
+	state->m_vsbIfAgcCfg.ctrlMode = (ulVSBIfAgcMode);
+	state->m_vsbIfAgcCfg.outputLevel = (ulVSBIfAgcOutputLevel);
+	state->m_vsbIfAgcCfg.minOutputLevel = (ulVSBIfAgcMinLevel);
+	state->m_vsbIfAgcCfg.maxOutputLevel = (ulVSBIfAgcMaxLevel);
+	state->m_vsbIfAgcCfg.speed = (ulVSBIfAgcSpeed);
+	state->m_vsbPgaCfg = 140;
+
+	/* VSB RF */
+	state->m_vsbRfAgcCfg.ctrlMode = (ulVSBRfAgcMode);
+	state->m_vsbRfAgcCfg.outputLevel = (ulVSBRfAgcOutputLevel);
+	state->m_vsbRfAgcCfg.minOutputLevel = (ulVSBRfAgcMinLevel);
+	state->m_vsbRfAgcCfg.maxOutputLevel = (ulVSBRfAgcMaxLevel);
+	state->m_vsbRfAgcCfg.speed = (ulVSBRfAgcSpeed);
+	state->m_vsbRfAgcCfg.top = (ulVSBRfAgcTop);
+	state->m_vsbRfAgcCfg.cutOffCurrent = (ulVSBRfAgcCutOffCurrent);
+	state->m_vsbPreSawCfg.reference = 0x07;
+	state->m_vsbPreSawCfg.usePreSaw = true;
+
+	state->m_Quality83percent = DEFAULT_MER_83;
+	state->m_Quality93percent = DEFAULT_MER_93;
+	if (ulQual93 <= 500 && ulQual83 < ulQual93) {
+		state->m_Quality83percent = ulQual83;
+		state->m_Quality93percent = ulQual93;
+	}
+
+	/* ATV IF */
+	state->m_atvIfAgcCfg.ctrlMode = (ulATVIfAgcMode);
+	state->m_atvIfAgcCfg.outputLevel = (ulATVIfAgcOutputLevel);
+	state->m_atvIfAgcCfg.minOutputLevel = (ulATVIfAgcMinLevel);
+	state->m_atvIfAgcCfg.maxOutputLevel = (ulATVIfAgcMaxLevel);
+	state->m_atvIfAgcCfg.speed = (ulATVIfAgcSpeed);
+
+	/* ATV RF */
+	state->m_atvRfAgcCfg.ctrlMode = (ulATVRfAgcMode);
+	state->m_atvRfAgcCfg.outputLevel = (ulATVRfAgcOutputLevel);
+	state->m_atvRfAgcCfg.minOutputLevel = (ulATVRfAgcMinLevel);
+	state->m_atvRfAgcCfg.maxOutputLevel = (ulATVRfAgcMaxLevel);
+	state->m_atvRfAgcCfg.speed = (ulATVRfAgcSpeed);
+	state->m_atvRfAgcCfg.top = (ulATVRfAgcTop);
+	state->m_atvRfAgcCfg.cutOffCurrent = (ulATVRfAgcCutOffCurrent);
+	state->m_atvPreSawCfg.reference = 0x04;
+	state->m_atvPreSawCfg.usePreSaw = true;
+
+
+	/* DVBT RF */
+	state->m_dvbtRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF;
+	state->m_dvbtRfAgcCfg.outputLevel = 0;
+	state->m_dvbtRfAgcCfg.minOutputLevel = 0;
+	state->m_dvbtRfAgcCfg.maxOutputLevel = 0xFFFF;
+	state->m_dvbtRfAgcCfg.top = 0x2100;
+	state->m_dvbtRfAgcCfg.cutOffCurrent = 4000;
+	state->m_dvbtRfAgcCfg.speed = 1;
+
+
+	/* DVBT IF */
+	state->m_dvbtIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO;
+	state->m_dvbtIfAgcCfg.outputLevel = 0;
+	state->m_dvbtIfAgcCfg.minOutputLevel = 0;
+	state->m_dvbtIfAgcCfg.maxOutputLevel = 9000;
+	state->m_dvbtIfAgcCfg.top = 13424;
+	state->m_dvbtIfAgcCfg.cutOffCurrent = 0;
+	state->m_dvbtIfAgcCfg.speed = 3;
+	state->m_dvbtIfAgcCfg.FastClipCtrlDelay = 30;
+	state->m_dvbtIfAgcCfg.IngainTgtMax = 30000;
+	/* state->m_dvbtPgaCfg = 140; */
+
+	state->m_dvbtPreSawCfg.reference = 4;
+	state->m_dvbtPreSawCfg.usePreSaw = false;
+
+	/* QAM RF */
+	state->m_qamRfAgcCfg.ctrlMode = DRXK_AGC_CTRL_OFF;
+	state->m_qamRfAgcCfg.outputLevel = 0;
+	state->m_qamRfAgcCfg.minOutputLevel = 6023;
+	state->m_qamRfAgcCfg.maxOutputLevel = 27000;
+	state->m_qamRfAgcCfg.top = 0x2380;
+	state->m_qamRfAgcCfg.cutOffCurrent = 4000;
+	state->m_qamRfAgcCfg.speed = 3;
+
+	/* QAM IF */
+	state->m_qamIfAgcCfg.ctrlMode = DRXK_AGC_CTRL_AUTO;
+	state->m_qamIfAgcCfg.outputLevel = 0;
+	state->m_qamIfAgcCfg.minOutputLevel = 0;
+	state->m_qamIfAgcCfg.maxOutputLevel = 9000;
+	state->m_qamIfAgcCfg.top = 0x0511;
+	state->m_qamIfAgcCfg.cutOffCurrent = 0;
+	state->m_qamIfAgcCfg.speed = 3;
+	state->m_qamIfAgcCfg.IngainTgtMax = 5119;
+	state->m_qamIfAgcCfg.FastClipCtrlDelay = 50;
+
+	state->m_qamPgaCfg = 140;
+	state->m_qamPreSawCfg.reference = 4;
+	state->m_qamPreSawCfg.usePreSaw = false;
+
+	state->m_OperationMode = OM_NONE;
+	state->m_DrxkState = DRXK_UNINITIALIZED;
+
+	/* MPEG output configuration */
+	state->m_enableMPEGOutput = true;	/* If TRUE; enable MPEG ouput */
+	state->m_insertRSByte = false;	/* If TRUE; insert RS byte */
+	state->m_enableParallel = true;	/* If TRUE;
+					   parallel out otherwise serial */
+	state->m_invertDATA = false;	/* If TRUE; invert DATA signals */
+	state->m_invertERR = false;	/* If TRUE; invert ERR signal */
+	state->m_invertSTR = false;	/* If TRUE; invert STR signals */
+	state->m_invertVAL = false;	/* If TRUE; invert VAL signals */
+	state->m_invertCLK = (ulInvertTSClock != 0);	/* If TRUE; invert CLK signals */
+	state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0);
+	state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0);
+	/* If TRUE; static MPEG clockrate will be used;
+	   otherwise clockrate will adapt to the bitrate of the TS */
+
+	state->m_DVBTBitrate = ulDVBTBitrate;
+	state->m_DVBCBitrate = ulDVBCBitrate;
+
+	state->m_TSDataStrength = (ulTSDataStrength & 0x07);
+	state->m_TSClockkStrength = (ulTSClockkStrength & 0x07);
+
+	/* Maximum bitrate in b/s in case static clockrate is selected */
+	state->m_mpegTsStaticBitrate = 19392658;
+	state->m_disableTEIhandling = false;
+
+	if (ulInsertRSByte)
+		state->m_insertRSByte = true;
+
+	state->m_MpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
+	if (ulMpegLockTimeOut < 10000)
+		state->m_MpegLockTimeOut = ulMpegLockTimeOut;
+	state->m_DemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
+	if (ulDemodLockTimeOut < 10000)
+		state->m_DemodLockTimeOut = ulDemodLockTimeOut;
+
+	/* QAM defaults */
+	state->m_Constellation = DRX_CONSTELLATION_AUTO;
+	state->m_qamInterleaveMode = DRXK_QAM_I12_J17;
+	state->m_fecRsPlen = 204 * 8;	/* fecRsPlen  annex A */
+	state->m_fecRsPrescale = 1;
+
+	state->m_sqiSpeed = DRXK_DVBT_SQI_SPEED_MEDIUM;
+	state->m_agcFastClipCtrlDelay = 0;
+
+	state->m_GPIOCfg = (ulGPIOCfg);
+
+	state->m_bPowerDown = false;
+	state->m_currentPowerMode = DRX_POWER_DOWN;
+
+	state->m_enableParallel = (ulSerialMode == 0);
+
+	state->m_rfmirror = (ulRfMirror == 0);
+	state->m_IfAgcPol = false;
+	return 0;
+}
+
+static int DRXX_Open(struct drxk_state *state)
+{
+	int status = 0;
+	u32 jtag = 0;
+	u16 bid = 0;
+	u16 key = 0;
+
+	dprintk(1, "\n");
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+	/* Check device id */
+	status = read16(state, SIO_TOP_COMM_KEY__A, &key);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
+	if (status < 0)
+		goto error;
+	status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag);
+	if (status < 0)
+		goto error;
+	status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, key);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int GetDeviceCapabilities(struct drxk_state *state)
+{
+	u16 sioPdrOhwCfg = 0;
+	u32 sioTopJtagidLo = 0;
+	int status;
+	const char *spin = "";
+
+	dprintk(1, "\n");
+
+	/* driver 0.9.0 */
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA);
+	if (status < 0)
+		goto error;
+	status = read16(state, SIO_PDR_OHW_CFG__A, &sioPdrOhwCfg);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
+	if (status < 0)
+		goto error;
+
+	switch ((sioPdrOhwCfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) {
+	case 0:
+		/* ignore (bypass ?) */
+		break;
+	case 1:
+		/* 27 MHz */
+		state->m_oscClockFreq = 27000;
+		break;
+	case 2:
+		/* 20.25 MHz */
+		state->m_oscClockFreq = 20250;
+		break;
+	case 3:
+		/* 4 MHz */
+		state->m_oscClockFreq = 20250;
+		break;
+	default:
+		printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n");
+		return -EINVAL;
+	}
+	/*
+		Determine device capabilities
+		Based on pinning v14
+		*/
+	status = read32(state, SIO_TOP_JTAGID_LO__A, &sioTopJtagidLo);
+	if (status < 0)
+		goto error;
+	/* driver 0.9.0 */
+	switch ((sioTopJtagidLo >> 29) & 0xF) {
+	case 0:
+		state->m_deviceSpin = DRXK_SPIN_A1;
+		spin = "A1";
+		break;
+	case 2:
+		state->m_deviceSpin = DRXK_SPIN_A2;
+		spin = "A2";
+		break;
+	case 3:
+		state->m_deviceSpin = DRXK_SPIN_A3;
+		spin = "A3";
+		break;
+	default:
+		state->m_deviceSpin = DRXK_SPIN_UNKNOWN;
+		status = -EINVAL;
+		printk(KERN_ERR "drxk: Spin unknown\n");
+		goto error2;
+	}
+	switch ((sioTopJtagidLo >> 12) & 0xFF) {
+	case 0x13:
+		/* typeId = DRX3913K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = false;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = false;
+		state->m_hasGPIO1 = false;
+		state->m_hasIRQN = false;
+		break;
+	case 0x15:
+		/* typeId = DRX3915K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = false;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x16:
+		/* typeId = DRX3916K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = false;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x18:
+		/* typeId = DRX3918K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = false;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x21:
+		/* typeId = DRX3921K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x23:
+		/* typeId = DRX3923K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x25:
+		/* typeId = DRX3925K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = true;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	case 0x26:
+		/* typeId = DRX3926K_TYPE_ID */
+		state->m_hasLNA = false;
+		state->m_hasOOB = false;
+		state->m_hasATV = true;
+		state->m_hasAudio = false;
+		state->m_hasDVBT = true;
+		state->m_hasDVBC = true;
+		state->m_hasSAWSW = true;
+		state->m_hasGPIO2 = true;
+		state->m_hasGPIO1 = true;
+		state->m_hasIRQN = false;
+		break;
+	default:
+		printk(KERN_ERR "drxk: DeviceID 0x%02x not supported\n",
+			((sioTopJtagidLo >> 12) & 0xFF));
+		status = -EINVAL;
+		goto error2;
+	}
+
+	printk(KERN_INFO
+	       "drxk: detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n",
+	       ((sioTopJtagidLo >> 12) & 0xFF), spin,
+	       state->m_oscClockFreq / 1000,
+	       state->m_oscClockFreq % 1000);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+error2:
+	return status;
+}
+
+static int HI_Command(struct drxk_state *state, u16 cmd, u16 *pResult)
+{
+	int status;
+	bool powerdown_cmd;
+
+	dprintk(1, "\n");
+
+	/* Write command */
+	status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd);
+	if (status < 0)
+		goto error;
+	if (cmd == SIO_HI_RA_RAM_CMD_RESET)
+		msleep(1);
+
+	powerdown_cmd =
+	    (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) &&
+		    ((state->m_HICfgCtrl) &
+		     SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) ==
+		    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ);
+	if (powerdown_cmd == false) {
+		/* Wait until command rdy */
+		u32 retryCount = 0;
+		u16 waitCmd;
+
+		do {
+			msleep(1);
+			retryCount += 1;
+			status = read16(state, SIO_HI_RA_RAM_CMD__A,
+					  &waitCmd);
+		} while ((status < 0) && (retryCount < DRXK_MAX_RETRIES)
+			 && (waitCmd != 0));
+		if (status < 0)
+			goto error;
+		status = read16(state, SIO_HI_RA_RAM_RES__A, pResult);
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int HI_CfgCommand(struct drxk_state *state)
+{
+	int status;
+
+	dprintk(1, "\n");
+
+	mutex_lock(&state->mutex);
+
+	status = write16(state, SIO_HI_RA_RAM_PAR_6__A, state->m_HICfgTimeout);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_5__A, state->m_HICfgCtrl);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_4__A, state->m_HICfgWakeUpKey);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_3__A, state->m_HICfgBridgeDelay);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_2__A, state->m_HICfgTimingDiv);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
+	if (status < 0)
+		goto error;
+	status = HI_Command(state, SIO_HI_RA_RAM_CMD_CONFIG, 0);
+	if (status < 0)
+		goto error;
+
+	state->m_HICfgCtrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
+error:
+	mutex_unlock(&state->mutex);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int InitHI(struct drxk_state *state)
+{
+	dprintk(1, "\n");
+
+	state->m_HICfgWakeUpKey = (state->demod_address << 1);
+	state->m_HICfgTimeout = 0x96FF;
+	/* port/bridge/power down ctrl */
+	state->m_HICfgCtrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
+
+	return HI_CfgCommand(state);
+}
+
+static int MPEGTSConfigurePins(struct drxk_state *state, bool mpegEnable)
+{
+	int status = -1;
+	u16 sioPdrMclkCfg = 0;
+	u16 sioPdrMdxCfg = 0;
+
+	dprintk(1, "\n");
+
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+
+	/*  MPEG TS pad configuration */
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0xFABA);
+	if (status < 0)
+		goto error;
+
+	if (mpegEnable == false) {
+		/*  Set MPEG TS pads to inputmode */
+		status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
+		if (status < 0)
+			goto error;
+	} else {
+		/* Enable MPEG output */
+		sioPdrMdxCfg =
+			((state->m_TSDataStrength <<
+			SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003);
+		sioPdrMclkCfg = ((state->m_TSClockkStrength <<
+					SIO_PDR_MCLK_CFG_DRIVE__B) |
+					0x0003);
+
+		status = write16(state, SIO_PDR_MSTRT_CFG__A, sioPdrMdxCfg);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);	/* Disable */
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);	/* Disable */
+		if (status < 0)
+			goto error;
+		if (state->m_enableParallel == true) {
+			/* paralel -> enable MD1 to MD7 */
+			status = write16(state, SIO_PDR_MD1_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD2_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD3_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD4_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD5_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD6_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD7_CFG__A, sioPdrMdxCfg);
+			if (status < 0)
+				goto error;
+		} else {
+			sioPdrMdxCfg = ((state->m_TSDataStrength <<
+						SIO_PDR_MD0_CFG_DRIVE__B)
+					| 0x0003);
+			/* serial -> disable MD1 to MD7 */
+			status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+			status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
+			if (status < 0)
+				goto error;
+		}
+		status = write16(state, SIO_PDR_MCLK_CFG__A, sioPdrMclkCfg);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_PDR_MD0_CFG__A, sioPdrMdxCfg);
+		if (status < 0)
+			goto error;
+	}
+	/*  Enable MB output over MPEG pads and ctl input */
+	status = write16(state, SIO_PDR_MON_CFG__A, 0x0000);
+	if (status < 0)
+		goto error;
+	/*  Write nomagic word to enable pdr reg write */
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSDisable(struct drxk_state *state)
+{
+	dprintk(1, "\n");
+
+	return MPEGTSConfigurePins(state, false);
+}
+
+static int BLChainCmd(struct drxk_state *state,
+		      u16 romOffset, u16 nrOfElements, u32 timeOut)
+{
+	u16 blStatus = 0;
+	int status;
+	unsigned long end;
+
+	dprintk(1, "\n");
+	mutex_lock(&state->mutex);
+	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_CHAIN_ADDR__A, romOffset);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_CHAIN_LEN__A, nrOfElements);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
+	if (status < 0)
+		goto error;
+
+	end = jiffies + msecs_to_jiffies(timeOut);
+	do {
+		msleep(1);
+		status = read16(state, SIO_BL_STATUS__A, &blStatus);
+		if (status < 0)
+			goto error;
+	} while ((blStatus == 0x1) &&
+			((time_is_after_jiffies(end))));
+
+	if (blStatus == 0x1) {
+		printk(KERN_ERR "drxk: SIO not ready\n");
+		status = -EINVAL;
+		goto error2;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+error2:
+	mutex_unlock(&state->mutex);
+	return status;
+}
+
+
+static int DownloadMicrocode(struct drxk_state *state,
+			     const u8 pMCImage[], u32 Length)
+{
+	const u8 *pSrc = pMCImage;
+	u16 Flags;
+	u16 Drain;
+	u32 Address;
+	u16 nBlocks;
+	u16 BlockSize;
+	u16 BlockCRC;
+	u32 offset = 0;
+	u32 i;
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	/* down the drain (we don care about MAGIC_WORD) */
+	Drain = (pSrc[0] << 8) | pSrc[1];
+	pSrc += sizeof(u16);
+	offset += sizeof(u16);
+	nBlocks = (pSrc[0] << 8) | pSrc[1];
+	pSrc += sizeof(u16);
+	offset += sizeof(u16);
+
+	for (i = 0; i < nBlocks; i += 1) {
+		Address = (pSrc[0] << 24) | (pSrc[1] << 16) |
+		    (pSrc[2] << 8) | pSrc[3];
+		pSrc += sizeof(u32);
+		offset += sizeof(u32);
+
+		BlockSize = ((pSrc[0] << 8) | pSrc[1]) * sizeof(u16);
+		pSrc += sizeof(u16);
+		offset += sizeof(u16);
+
+		Flags = (pSrc[0] << 8) | pSrc[1];
+		pSrc += sizeof(u16);
+		offset += sizeof(u16);
+
+		BlockCRC = (pSrc[0] << 8) | pSrc[1];
+		pSrc += sizeof(u16);
+		offset += sizeof(u16);
+
+		if (offset + BlockSize > Length) {
+			printk(KERN_ERR "drxk: Firmware is corrupted.\n");
+			return -EINVAL;
+		}
+
+		status = write_block(state, Address, BlockSize, pSrc);
+		if (status < 0) {
+			printk(KERN_ERR "drxk: Error %d while loading firmware\n", status);
+			break;
+		}
+		pSrc += BlockSize;
+		offset += BlockSize;
+	}
+	return status;
+}
+
+static int DVBTEnableOFDMTokenRing(struct drxk_state *state, bool enable)
+{
+	int status;
+	u16 data = 0;
+	u16 desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON;
+	u16 desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED;
+	unsigned long end;
+
+	dprintk(1, "\n");
+
+	if (enable == false) {
+		desiredCtrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF;
+		desiredStatus = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN;
+	}
+
+	status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
+	if (status >= 0 && data == desiredStatus) {
+		/* tokenring already has correct status */
+		return status;
+	}
+	/* Disable/enable dvbt tokenring bridge   */
+	status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desiredCtrl);
+
+	end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT);
+	do {
+		status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
+		if ((status >= 0 && data == desiredStatus) || time_is_after_jiffies(end))
+			break;
+		msleep(1);
+	} while (1);
+	if (data != desiredStatus) {
+		printk(KERN_ERR "drxk: SIO not ready\n");
+		return -EINVAL;
+	}
+	return status;
+}
+
+static int MPEGTSStop(struct drxk_state *state)
+{
+	int status = 0;
+	u16 fecOcSncMode = 0;
+	u16 fecOcIprMode = 0;
+
+	dprintk(1, "\n");
+
+	/* Gracefull shutdown (byte boundaries) */
+	status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode);
+	if (status < 0)
+		goto error;
+	fecOcSncMode |= FEC_OC_SNC_MODE_SHUTDOWN__M;
+	status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode);
+	if (status < 0)
+		goto error;
+
+	/* Suppress MCLK during absence of data */
+	status = read16(state, FEC_OC_IPR_MODE__A, &fecOcIprMode);
+	if (status < 0)
+		goto error;
+	fecOcIprMode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M;
+	status = write16(state, FEC_OC_IPR_MODE__A, fecOcIprMode);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int scu_command(struct drxk_state *state,
+		       u16 cmd, u8 parameterLen,
+		       u16 *parameter, u8 resultLen, u16 *result)
+{
+#if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15
+#error DRXK register mapping no longer compatible with this routine!
+#endif
+	u16 curCmd = 0;
+	int status = -EINVAL;
+	unsigned long end;
+	u8 buffer[34];
+	int cnt = 0, ii;
+	const char *p;
+	char errname[30];
+
+	dprintk(1, "\n");
+
+	if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
+	    ((resultLen > 0) && (result == NULL)))
+		goto error;
+
+	mutex_lock(&state->mutex);
+
+	/* assume that the command register is ready
+		since it is checked afterwards */
+	for (ii = parameterLen - 1; ii >= 0; ii -= 1) {
+		buffer[cnt++] = (parameter[ii] & 0xFF);
+		buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF);
+	}
+	buffer[cnt++] = (cmd & 0xFF);
+	buffer[cnt++] = ((cmd >> 8) & 0xFF);
+
+	write_block(state, SCU_RAM_PARAM_0__A -
+			(parameterLen - 1), cnt, buffer);
+	/* Wait until SCU has processed command */
+	end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME);
+	do {
+		msleep(1);
+		status = read16(state, SCU_RAM_COMMAND__A, &curCmd);
+		if (status < 0)
+			goto error;
+	} while (!(curCmd == DRX_SCU_READY) && (time_is_after_jiffies(end)));
+	if (curCmd != DRX_SCU_READY) {
+		printk(KERN_ERR "drxk: SCU not ready\n");
+		status = -EIO;
+		goto error2;
+	}
+	/* read results */
+	if ((resultLen > 0) && (result != NULL)) {
+		s16 err;
+		int ii;
+
+		for (ii = resultLen - 1; ii >= 0; ii -= 1) {
+			status = read16(state, SCU_RAM_PARAM_0__A - ii, &result[ii]);
+			if (status < 0)
+				goto error;
+		}
+
+		/* Check if an error was reported by SCU */
+		err = (s16)result[0];
+		if (err >= 0)
+			goto error;
+
+		/* check for the known error codes */
+		switch (err) {
+		case SCU_RESULT_UNKCMD:
+			p = "SCU_RESULT_UNKCMD";
+			break;
+		case SCU_RESULT_UNKSTD:
+			p = "SCU_RESULT_UNKSTD";
+			break;
+		case SCU_RESULT_SIZE:
+			p = "SCU_RESULT_SIZE";
+			break;
+		case SCU_RESULT_INVPAR:
+			p = "SCU_RESULT_INVPAR";
+			break;
+		default: /* Other negative values are errors */
+			sprintf(errname, "ERROR: %d\n", err);
+			p = errname;
+		}
+		printk(KERN_ERR "drxk: %s while sending cmd 0x%04x with params:", p, cmd);
+		print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt);
+		status = -EINVAL;
+		goto error2;
+	}
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+error2:
+	mutex_unlock(&state->mutex);
+	return status;
+}
+
+static int SetIqmAf(struct drxk_state *state, bool active)
+{
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	/* Configure IQM */
+	status = read16(state, IQM_AF_STDBY__A, &data);
+	if (status < 0)
+		goto error;
+
+	if (!active) {
+		data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY
+				| IQM_AF_STDBY_STDBY_AMP_STANDBY
+				| IQM_AF_STDBY_STDBY_PD_STANDBY
+				| IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY
+				| IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY);
+	} else {
+		data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_AMP_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_PD_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY)
+				& (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY)
+			);
+	}
+	status = write16(state, IQM_AF_STDBY__A, data);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int CtrlPowerMode(struct drxk_state *state, enum DRXPowerMode *mode)
+{
+	int status = 0;
+	u16 sioCcPwdMode = 0;
+
+	dprintk(1, "\n");
+
+	/* Check arguments */
+	if (mode == NULL)
+		return -EINVAL;
+
+	switch (*mode) {
+	case DRX_POWER_UP:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_NONE;
+		break;
+	case DRXK_POWER_DOWN_OFDM:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OFDM;
+		break;
+	case DRXK_POWER_DOWN_CORE:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_CLOCK;
+		break;
+	case DRXK_POWER_DOWN_PLL:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_PLL;
+		break;
+	case DRX_POWER_DOWN:
+		sioCcPwdMode = SIO_CC_PWD_MODE_LEVEL_OSC;
+		break;
+	default:
+		/* Unknow sleep mode */
+		return -EINVAL;
+	}
+
+	/* If already in requested power mode, do nothing */
+	if (state->m_currentPowerMode == *mode)
+		return 0;
+
+	/* For next steps make sure to start from DRX_POWER_UP mode */
+	if (state->m_currentPowerMode != DRX_POWER_UP) {
+		status = PowerUpDevice(state);
+		if (status < 0)
+			goto error;
+		status = DVBTEnableOFDMTokenRing(state, true);
+		if (status < 0)
+			goto error;
+	}
+
+	if (*mode == DRX_POWER_UP) {
+		/* Restore analog & pin configuartion */
+	} else {
+		/* Power down to requested mode */
+		/* Backup some register settings */
+		/* Set pins with possible pull-ups connected
+		   to them in input mode */
+		/* Analog power down */
+		/* ADC power down */
+		/* Power down device */
+		/* stop all comm_exec */
+		/* Stop and power down previous standard */
+		switch (state->m_OperationMode) {
+		case OM_DVBT:
+			status = MPEGTSStop(state);
+			if (status < 0)
+				goto error;
+			status = PowerDownDVBT(state, false);
+			if (status < 0)
+				goto error;
+			break;
+		case OM_QAM_ITU_A:
+		case OM_QAM_ITU_C:
+			status = MPEGTSStop(state);
+			if (status < 0)
+				goto error;
+			status = PowerDownQAM(state);
+			if (status < 0)
+				goto error;
+			break;
+		default:
+			break;
+		}
+		status = DVBTEnableOFDMTokenRing(state, false);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_CC_PWD_MODE__A, sioCcPwdMode);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+		if (status < 0)
+			goto error;
+
+		if (*mode != DRXK_POWER_DOWN_OFDM) {
+			state->m_HICfgCtrl |=
+				SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
+			status = HI_CfgCommand(state);
+			if (status < 0)
+				goto error;
+		}
+	}
+	state->m_currentPowerMode = *mode;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int PowerDownDVBT(struct drxk_state *state, bool setPowerMode)
+{
+	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
+	u16 cmdResult = 0;
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	status = read16(state, SCU_COMM_EXEC__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == SCU_COMM_EXEC_ACTIVE) {
+		/* Send OFDM stop command */
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+		/* Send OFDM reset command */
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+	}
+
+	/* Reset datapath for OFDM, processors first */
+	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
+	if (status < 0)
+		goto error;
+
+	/* powerdown AFE                   */
+	status = SetIqmAf(state, false);
+	if (status < 0)
+		goto error;
+
+	/* powerdown to OFDM mode          */
+	if (setPowerMode) {
+		status = CtrlPowerMode(state, &powerMode);
+		if (status < 0)
+			goto error;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetOperationMode(struct drxk_state *state,
+			    enum OperationMode oMode)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/*
+	   Stop and power down previous standard
+	   TODO investigate total power down instead of partial
+	   power down depending on "previous" standard.
+	 */
+
+	/* disable HW lock indicator */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+
+	/* Device is already at the required mode */
+	if (state->m_OperationMode == oMode)
+		return 0;
+
+	switch (state->m_OperationMode) {
+		/* OM_NONE was added for start up */
+	case OM_NONE:
+		break;
+	case OM_DVBT:
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = PowerDownDVBT(state, true);
+		if (status < 0)
+			goto error;
+		state->m_OperationMode = OM_NONE;
+		break;
+	case OM_QAM_ITU_A:	/* fallthrough */
+	case OM_QAM_ITU_C:
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = PowerDownQAM(state);
+		if (status < 0)
+			goto error;
+		state->m_OperationMode = OM_NONE;
+		break;
+	case OM_QAM_ITU_B:
+	default:
+		status = -EINVAL;
+		goto error;
+	}
+
+	/*
+		Power up new standard
+		*/
+	switch (oMode) {
+	case OM_DVBT:
+		state->m_OperationMode = oMode;
+		status = SetDVBTStandard(state, oMode);
+		if (status < 0)
+			goto error;
+		break;
+	case OM_QAM_ITU_A:	/* fallthrough */
+	case OM_QAM_ITU_C:
+		state->m_OperationMode = oMode;
+		status = SetQAMStandard(state, oMode);
+		if (status < 0)
+			goto error;
+		break;
+	case OM_QAM_ITU_B:
+	default:
+		status = -EINVAL;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int Start(struct drxk_state *state, s32 offsetFreq,
+		 s32 IntermediateFrequency)
+{
+	int status = -EINVAL;
+
+	u16 IFreqkHz;
+	s32 OffsetkHz = offsetFreq / 1000;
+
+	dprintk(1, "\n");
+	if (state->m_DrxkState != DRXK_STOPPED &&
+		state->m_DrxkState != DRXK_DTV_STARTED)
+		goto error;
+
+	state->m_bMirrorFreqSpect = (state->param.inversion == INVERSION_ON);
+
+	if (IntermediateFrequency < 0) {
+		state->m_bMirrorFreqSpect = !state->m_bMirrorFreqSpect;
+		IntermediateFrequency = -IntermediateFrequency;
+	}
+
+	switch (state->m_OperationMode) {
+	case OM_QAM_ITU_A:
+	case OM_QAM_ITU_C:
+		IFreqkHz = (IntermediateFrequency / 1000);
+		status = SetQAM(state, IFreqkHz, OffsetkHz);
+		if (status < 0)
+			goto error;
+		state->m_DrxkState = DRXK_DTV_STARTED;
+		break;
+	case OM_DVBT:
+		IFreqkHz = (IntermediateFrequency / 1000);
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = SetDVBT(state, IFreqkHz, OffsetkHz);
+		if (status < 0)
+			goto error;
+		status = DVBTStart(state);
+		if (status < 0)
+			goto error;
+		state->m_DrxkState = DRXK_DTV_STARTED;
+		break;
+	default:
+		break;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int ShutDown(struct drxk_state *state)
+{
+	dprintk(1, "\n");
+
+	MPEGTSStop(state);
+	return 0;
+}
+
+static int GetLockStatus(struct drxk_state *state, u32 *pLockStatus,
+			 u32 Time)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	if (pLockStatus == NULL)
+		goto error;
+
+	*pLockStatus = NOT_LOCKED;
+
+	/* define the SCU command code */
+	switch (state->m_OperationMode) {
+	case OM_QAM_ITU_A:
+	case OM_QAM_ITU_B:
+	case OM_QAM_ITU_C:
+		status = GetQAMLockStatus(state, pLockStatus);
+		break;
+	case OM_DVBT:
+		status = GetDVBTLockStatus(state, pLockStatus);
+		break;
+	default:
+		break;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSStart(struct drxk_state *state)
+{
+	int status;
+
+	u16 fecOcSncMode = 0;
+
+	/* Allow OC to sync again */
+	status = read16(state, FEC_OC_SNC_MODE__A, &fecOcSncMode);
+	if (status < 0)
+		goto error;
+	fecOcSncMode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M;
+	status = write16(state, FEC_OC_SNC_MODE__A, fecOcSncMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_UNLOCK__A, 1);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSDtoInit(struct drxk_state *state)
+{
+	int status;
+
+	dprintk(1, "\n");
+
+	/* Rate integration settings */
+	status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4);
+	if (status < 0)
+		goto error;
+
+	/* Additional configuration */
+	status = write16(state, FEC_OC_OCR_INVERT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_LWM__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_HWM__A, 12);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int MPEGTSDtoSetup(struct drxk_state *state,
+			  enum OperationMode oMode)
+{
+	int status;
+
+	u16 fecOcRegMode = 0;	/* FEC_OC_MODE       register value */
+	u16 fecOcRegIprMode = 0;	/* FEC_OC_IPR_MODE   register value */
+	u16 fecOcDtoMode = 0;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcFctMode = 0;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcDtoPeriod = 2;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcDtoBurstLen = 188;	/* FEC_OC_IPR_INVERT register value */
+	u32 fecOcRcnCtlRate = 0;	/* FEC_OC_IPR_INVERT register value */
+	u16 fecOcTmdMode = 0;
+	u16 fecOcTmdIntUpdRate = 0;
+	u32 maxBitRate = 0;
+	bool staticCLK = false;
+
+	dprintk(1, "\n");
+
+	/* Check insertion of the Reed-Solomon parity bytes */
+	status = read16(state, FEC_OC_MODE__A, &fecOcRegMode);
+	if (status < 0)
+		goto error;
+	status = read16(state, FEC_OC_IPR_MODE__A, &fecOcRegIprMode);
+	if (status < 0)
+		goto error;
+	fecOcRegMode &= (~FEC_OC_MODE_PARITY__M);
+	fecOcRegIprMode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M);
+	if (state->m_insertRSByte == true) {
+		/* enable parity symbol forward */
+		fecOcRegMode |= FEC_OC_MODE_PARITY__M;
+		/* MVAL disable during parity bytes */
+		fecOcRegIprMode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M;
+		/* TS burst length to 204 */
+		fecOcDtoBurstLen = 204;
+	}
+
+	/* Check serial or parrallel output */
+	fecOcRegIprMode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
+	if (state->m_enableParallel == false) {
+		/* MPEG data output is serial -> set ipr_mode[0] */
+		fecOcRegIprMode |= FEC_OC_IPR_MODE_SERIAL__M;
+	}
+
+	switch (oMode) {
+	case OM_DVBT:
+		maxBitRate = state->m_DVBTBitrate;
+		fecOcTmdMode = 3;
+		fecOcRcnCtlRate = 0xC00000;
+		staticCLK = state->m_DVBTStaticCLK;
+		break;
+	case OM_QAM_ITU_A:	/* fallthrough */
+	case OM_QAM_ITU_C:
+		fecOcTmdMode = 0x0004;
+		fecOcRcnCtlRate = 0xD2B4EE;	/* good for >63 Mb/s */
+		maxBitRate = state->m_DVBCBitrate;
+		staticCLK = state->m_DVBCStaticCLK;
+		break;
+	default:
+		status = -EINVAL;
+	}		/* switch (standard) */
+	if (status < 0)
+		goto error;
+
+	/* Configure DTO's */
+	if (staticCLK) {
+		u32 bitRate = 0;
+
+		/* Rational DTO for MCLK source (static MCLK rate),
+			Dynamic DTO for optimal grouping
+			(avoid intra-packet gaps),
+			DTO offset enable to sync TS burst with MSTRT */
+		fecOcDtoMode = (FEC_OC_DTO_MODE_DYNAMIC__M |
+				FEC_OC_DTO_MODE_OFFSET_ENABLE__M);
+		fecOcFctMode = (FEC_OC_FCT_MODE_RAT_ENA__M |
+				FEC_OC_FCT_MODE_VIRT_ENA__M);
+
+		/* Check user defined bitrate */
+		bitRate = maxBitRate;
+		if (bitRate > 75900000UL) {	/* max is 75.9 Mb/s */
+			bitRate = 75900000UL;
+		}
+		/* Rational DTO period:
+			dto_period = (Fsys / bitrate) - 2
+
+			Result should be floored,
+			to make sure >= requested bitrate
+			*/
+		fecOcDtoPeriod = (u16) (((state->m_sysClockFreq)
+						* 1000) / bitRate);
+		if (fecOcDtoPeriod <= 2)
+			fecOcDtoPeriod = 0;
+		else
+			fecOcDtoPeriod -= 2;
+		fecOcTmdIntUpdRate = 8;
+	} else {
+		/* (commonAttr->staticCLK == false) => dynamic mode */
+		fecOcDtoMode = FEC_OC_DTO_MODE_DYNAMIC__M;
+		fecOcFctMode = FEC_OC_FCT_MODE__PRE;
+		fecOcTmdIntUpdRate = 5;
+	}
+
+	/* Write appropriate registers with requested configuration */
+	status = write16(state, FEC_OC_DTO_BURST_LEN__A, fecOcDtoBurstLen);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_DTO_PERIOD__A, fecOcDtoPeriod);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_DTO_MODE__A, fecOcDtoMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_FCT_MODE__A, fecOcFctMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_MODE__A, fecOcRegMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_IPR_MODE__A, fecOcRegIprMode);
+	if (status < 0)
+		goto error;
+
+	/* Rate integration settings */
+	status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fecOcRcnCtlRate);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, fecOcTmdIntUpdRate);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_TMD_MODE__A, fecOcTmdMode);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int MPEGTSConfigurePolarity(struct drxk_state *state)
+{
+	u16 fecOcRegIprInvert = 0;
+
+	/* Data mask for the output data byte */
+	u16 InvertDataMask =
+	    FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M |
+	    FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M |
+	    FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M |
+	    FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M;
+
+	dprintk(1, "\n");
+
+	/* Control selective inversion of output bits */
+	fecOcRegIprInvert &= (~(InvertDataMask));
+	if (state->m_invertDATA == true)
+		fecOcRegIprInvert |= InvertDataMask;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MERR__M));
+	if (state->m_invertERR == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MERR__M;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MSTRT__M));
+	if (state->m_invertSTR == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MSTRT__M;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MVAL__M));
+	if (state->m_invertVAL == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MVAL__M;
+	fecOcRegIprInvert &= (~(FEC_OC_IPR_INVERT_MCLK__M));
+	if (state->m_invertCLK == true)
+		fecOcRegIprInvert |= FEC_OC_IPR_INVERT_MCLK__M;
+
+	return write16(state, FEC_OC_IPR_INVERT__A, fecOcRegIprInvert);
+}
+
+#define   SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000
+
+static int SetAgcRf(struct drxk_state *state,
+		    struct SCfgAgc *pAgcCfg, bool isDTV)
+{
+	int status = -EINVAL;
+	u16 data = 0;
+	struct SCfgAgc *pIfAgcSettings;
+
+	dprintk(1, "\n");
+
+	if (pAgcCfg == NULL)
+		goto error;
+
+	switch (pAgcCfg->ctrlMode) {
+	case DRXK_AGC_CTRL_AUTO:
+		/* Enable RF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+
+		/* Enable SCU RF AGC loop */
+		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
+
+		/* Polarity */
+		if (state->m_RfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Set speed (using complementary reduction value) */
+		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
+		if (status < 0)
+			goto error;
+
+		data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M;
+		data |= (~(pAgcCfg->speed <<
+				SCU_RAM_AGC_KI_RED_RAGC_RED__B)
+				& SCU_RAM_AGC_KI_RED_RAGC_RED__M);
+
+		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
+		if (status < 0)
+			goto error;
+
+		if (IsDVBT(state))
+			pIfAgcSettings = &state->m_dvbtIfAgcCfg;
+		else if (IsQAM(state))
+			pIfAgcSettings = &state->m_qamIfAgcCfg;
+		else
+			pIfAgcSettings = &state->m_atvIfAgcCfg;
+		if (pIfAgcSettings == NULL) {
+			status = -EINVAL;
+			goto error;
+		}
+
+		/* Set TOP, only if IF-AGC is in AUTO mode */
+		if (pIfAgcSettings->ctrlMode == DRXK_AGC_CTRL_AUTO)
+			status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->top);
+			if (status < 0)
+				goto error;
+
+		/* Cut-Off current */
+		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, pAgcCfg->cutOffCurrent);
+		if (status < 0)
+			goto error;
+
+		/* Max. output level */
+		status = write16(state, SCU_RAM_AGC_RF_MAX__A, pAgcCfg->maxOutputLevel);
+		if (status < 0)
+			goto error;
+
+		break;
+
+	case DRXK_AGC_CTRL_USER:
+		/* Enable RF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU RF AGC loop */
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
+		if (state->m_RfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* SCU c.o.c. to 0, enabling full control range */
+		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0);
+		if (status < 0)
+			goto error;
+
+		/* Write value to output pin */
+		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, pAgcCfg->outputLevel);
+		if (status < 0)
+			goto error;
+		break;
+
+	case DRXK_AGC_CTRL_OFF:
+		/* Disable RF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU RF AGC loop */
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+		break;
+
+	default:
+		status = -EINVAL;
+
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+#define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000
+
+static int SetAgcIf(struct drxk_state *state,
+		    struct SCfgAgc *pAgcCfg, bool isDTV)
+{
+	u16 data = 0;
+	int status = 0;
+	struct SCfgAgc *pRfAgcSettings;
+
+	dprintk(1, "\n");
+
+	switch (pAgcCfg->ctrlMode) {
+	case DRXK_AGC_CTRL_AUTO:
+
+		/* Enable IF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+
+		/* Enable SCU IF AGC loop */
+		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
+
+		/* Polarity */
+		if (state->m_IfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Set speed (using complementary reduction value) */
+		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M;
+		data |= (~(pAgcCfg->speed <<
+				SCU_RAM_AGC_KI_RED_IAGC_RED__B)
+				& SCU_RAM_AGC_KI_RED_IAGC_RED__M);
+
+		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
+		if (status < 0)
+			goto error;
+
+		if (IsQAM(state))
+			pRfAgcSettings = &state->m_qamRfAgcCfg;
+		else
+			pRfAgcSettings = &state->m_atvRfAgcCfg;
+		if (pRfAgcSettings == NULL)
+			return -1;
+		/* Restore TOP */
+		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pRfAgcSettings->top);
+		if (status < 0)
+			goto error;
+		break;
+
+	case DRXK_AGC_CTRL_USER:
+
+		/* Enable IF AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU IF AGC loop */
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
+
+		/* Polarity */
+		if (state->m_IfAgcPol)
+			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		else
+			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Write value to output pin */
+		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, pAgcCfg->outputLevel);
+		if (status < 0)
+			goto error;
+		break;
+
+	case DRXK_AGC_CTRL_OFF:
+
+		/* Disable If AGC DAC */
+		status = read16(state, IQM_AF_STDBY__A, &data);
+		if (status < 0)
+			goto error;
+		data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
+		status = write16(state, IQM_AF_STDBY__A, data);
+		if (status < 0)
+			goto error;
+
+		/* Disable SCU IF AGC loop */
+		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
+		if (status < 0)
+			goto error;
+		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
+		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
+		if (status < 0)
+			goto error;
+		break;
+	}		/* switch (agcSettingsIf->ctrlMode) */
+
+	/* always set the top to support
+		configurations without if-loop */
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, pAgcCfg->top);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int ReadIFAgc(struct drxk_state *state, u32 *pValue)
+{
+	u16 agcDacLvl;
+	int status;
+	u16 Level = 0;
+
+	dprintk(1, "\n");
+
+	status = read16(state, IQM_AF_AGC_IF__A, &agcDacLvl);
+	if (status < 0) {
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+		return status;
+	}
+
+	*pValue = 0;
+
+	if (agcDacLvl > DRXK_AGC_DAC_OFFSET)
+		Level = agcDacLvl - DRXK_AGC_DAC_OFFSET;
+	if (Level < 14000)
+		*pValue = (14000 - Level) / 4;
+	else
+		*pValue = 0;
+
+	return status;
+}
+
+static int GetQAMSignalToNoise(struct drxk_state *state,
+			       s32 *pSignalToNoise)
+{
+	int status = 0;
+	u16 qamSlErrPower = 0;	/* accum. error between
+					raw and sliced symbols */
+	u32 qamSlSigPower = 0;	/* used for MER, depends of
+					QAM constellation */
+	u32 qamSlMer = 0;	/* QAM MER */
+
+	dprintk(1, "\n");
+
+	/* MER calculation */
+
+	/* get the register value needed for MER */
+	status = read16(state, QAM_SL_ERR_POWER__A, &qamSlErrPower);
+	if (status < 0) {
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+		return -EINVAL;
+	}
+
+	switch (state->param.u.qam.modulation) {
+	case QAM_16:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM16 << 2;
+		break;
+	case QAM_32:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM32 << 2;
+		break;
+	case QAM_64:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM64 << 2;
+		break;
+	case QAM_128:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM128 << 2;
+		break;
+	default:
+	case QAM_256:
+		qamSlSigPower = DRXK_QAM_SL_SIG_POWER_QAM256 << 2;
+		break;
+	}
+
+	if (qamSlErrPower > 0) {
+		qamSlMer = Log10Times100(qamSlSigPower) -
+			Log10Times100((u32) qamSlErrPower);
+	}
+	*pSignalToNoise = qamSlMer;
+
+	return status;
+}
+
+static int GetDVBTSignalToNoise(struct drxk_state *state,
+				s32 *pSignalToNoise)
+{
+	int status;
+	u16 regData = 0;
+	u32 EqRegTdSqrErrI = 0;
+	u32 EqRegTdSqrErrQ = 0;
+	u16 EqRegTdSqrErrExp = 0;
+	u16 EqRegTdTpsPwrOfs = 0;
+	u16 EqRegTdReqSmbCnt = 0;
+	u32 tpsCnt = 0;
+	u32 SqrErrIQ = 0;
+	u32 a = 0;
+	u32 b = 0;
+	u32 c = 0;
+	u32 iMER = 0;
+	u16 transmissionParams = 0;
+
+	dprintk(1, "\n");
+
+	status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, &EqRegTdTpsPwrOfs);
+	if (status < 0)
+		goto error;
+	status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, &EqRegTdReqSmbCnt);
+	if (status < 0)
+		goto error;
+	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, &EqRegTdSqrErrExp);
+	if (status < 0)
+		goto error;
+	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, &regData);
+	if (status < 0)
+		goto error;
+	/* Extend SQR_ERR_I operational range */
+	EqRegTdSqrErrI = (u32) regData;
+	if ((EqRegTdSqrErrExp > 11) &&
+		(EqRegTdSqrErrI < 0x00000FFFUL)) {
+		EqRegTdSqrErrI += 0x00010000UL;
+	}
+	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, &regData);
+	if (status < 0)
+		goto error;
+	/* Extend SQR_ERR_Q operational range */
+	EqRegTdSqrErrQ = (u32) regData;
+	if ((EqRegTdSqrErrExp > 11) &&
+		(EqRegTdSqrErrQ < 0x00000FFFUL))
+		EqRegTdSqrErrQ += 0x00010000UL;
+
+	status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, &transmissionParams);
+	if (status < 0)
+		goto error;
+
+	/* Check input data for MER */
+
+	/* MER calculation (in 0.1 dB) without math.h */
+	if ((EqRegTdTpsPwrOfs == 0) || (EqRegTdReqSmbCnt == 0))
+		iMER = 0;
+	else if ((EqRegTdSqrErrI + EqRegTdSqrErrQ) == 0) {
+		/* No error at all, this must be the HW reset value
+			* Apparently no first measurement yet
+			* Set MER to 0.0 */
+		iMER = 0;
+	} else {
+		SqrErrIQ = (EqRegTdSqrErrI + EqRegTdSqrErrQ) <<
+			EqRegTdSqrErrExp;
+		if ((transmissionParams &
+			OFDM_SC_RA_RAM_OP_PARAM_MODE__M)
+			== OFDM_SC_RA_RAM_OP_PARAM_MODE_2K)
+			tpsCnt = 17;
+		else
+			tpsCnt = 68;
+
+		/* IMER = 100 * log10 (x)
+			where x = (EqRegTdTpsPwrOfs^2 *
+			EqRegTdReqSmbCnt * tpsCnt)/SqrErrIQ
+
+			=> IMER = a + b -c
+			where a = 100 * log10 (EqRegTdTpsPwrOfs^2)
+			b = 100 * log10 (EqRegTdReqSmbCnt * tpsCnt)
+			c = 100 * log10 (SqrErrIQ)
+			*/
+
+		/* log(x) x = 9bits * 9bits->18 bits  */
+		a = Log10Times100(EqRegTdTpsPwrOfs *
+					EqRegTdTpsPwrOfs);
+		/* log(x) x = 16bits * 7bits->23 bits  */
+		b = Log10Times100(EqRegTdReqSmbCnt * tpsCnt);
+		/* log(x) x = (16bits + 16bits) << 15 ->32 bits  */
+		c = Log10Times100(SqrErrIQ);
+
+		iMER = a + b;
+		/* No negative MER, clip to zero */
+		if (iMER > c)
+			iMER -= c;
+		else
+			iMER = 0;
+	}
+	*pSignalToNoise = iMER;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int GetSignalToNoise(struct drxk_state *state, s32 *pSignalToNoise)
+{
+	dprintk(1, "\n");
+
+	*pSignalToNoise = 0;
+	switch (state->m_OperationMode) {
+	case OM_DVBT:
+		return GetDVBTSignalToNoise(state, pSignalToNoise);
+	case OM_QAM_ITU_A:
+	case OM_QAM_ITU_C:
+		return GetQAMSignalToNoise(state, pSignalToNoise);
+	default:
+		break;
+	}
+	return 0;
+}
+
+#if 0
+static int GetDVBTQuality(struct drxk_state *state, s32 *pQuality)
+{
+	/* SNR Values for quasi errorfree reception rom Nordig 2.2 */
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	static s32 QE_SN[] = {
+		51,		/* QPSK 1/2 */
+		69,		/* QPSK 2/3 */
+		79,		/* QPSK 3/4 */
+		89,		/* QPSK 5/6 */
+		97,		/* QPSK 7/8 */
+		108,		/* 16-QAM 1/2 */
+		131,		/* 16-QAM 2/3 */
+		146,		/* 16-QAM 3/4 */
+		156,		/* 16-QAM 5/6 */
+		160,		/* 16-QAM 7/8 */
+		165,		/* 64-QAM 1/2 */
+		187,		/* 64-QAM 2/3 */
+		202,		/* 64-QAM 3/4 */
+		216,		/* 64-QAM 5/6 */
+		225,		/* 64-QAM 7/8 */
+	};
+
+	*pQuality = 0;
+
+	do {
+		s32 SignalToNoise = 0;
+		u16 Constellation = 0;
+		u16 CodeRate = 0;
+		u32 SignalToNoiseRel;
+		u32 BERQuality;
+
+		status = GetDVBTSignalToNoise(state, &SignalToNoise);
+		if (status < 0)
+			break;
+		status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, &Constellation);
+		if (status < 0)
+			break;
+		Constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M;
+
+		status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, &CodeRate);
+		if (status < 0)
+			break;
+		CodeRate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M;
+
+		if (Constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM ||
+		    CodeRate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8)
+			break;
+		SignalToNoiseRel = SignalToNoise -
+		    QE_SN[Constellation * 5 + CodeRate];
+		BERQuality = 100;
+
+		if (SignalToNoiseRel < -70)
+			*pQuality = 0;
+		else if (SignalToNoiseRel < 30)
+			*pQuality = ((SignalToNoiseRel + 70) *
+				     BERQuality) / 100;
+		else
+			*pQuality = BERQuality;
+	} while (0);
+	return 0;
+};
+
+static int GetDVBCQuality(struct drxk_state *state, s32 *pQuality)
+{
+	int status = 0;
+	*pQuality = 0;
+
+	dprintk(1, "\n");
+
+	do {
+		u32 SignalToNoise = 0;
+		u32 BERQuality = 100;
+		u32 SignalToNoiseRel = 0;
+
+		status = GetQAMSignalToNoise(state, &SignalToNoise);
+		if (status < 0)
+			break;
+
+		switch (state->param.u.qam.modulation) {
+		case QAM_16:
+			SignalToNoiseRel = SignalToNoise - 200;
+			break;
+		case QAM_32:
+			SignalToNoiseRel = SignalToNoise - 230;
+			break;	/* Not in NorDig */
+		case QAM_64:
+			SignalToNoiseRel = SignalToNoise - 260;
+			break;
+		case QAM_128:
+			SignalToNoiseRel = SignalToNoise - 290;
+			break;
+		default:
+		case QAM_256:
+			SignalToNoiseRel = SignalToNoise - 320;
+			break;
+		}
+
+		if (SignalToNoiseRel < -70)
+			*pQuality = 0;
+		else if (SignalToNoiseRel < 30)
+			*pQuality = ((SignalToNoiseRel + 70) *
+				     BERQuality) / 100;
+		else
+			*pQuality = BERQuality;
+	} while (0);
+
+	return status;
+}
+
+static int GetQuality(struct drxk_state *state, s32 *pQuality)
+{
+	dprintk(1, "\n");
+
+	switch (state->m_OperationMode) {
+	case OM_DVBT:
+		return GetDVBTQuality(state, pQuality);
+	case OM_QAM_ITU_A:
+		return GetDVBCQuality(state, pQuality);
+	default:
+		break;
+	}
+
+	return 0;
+}
+#endif
+
+/* Free data ram in SIO HI */
+#define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040
+#define SIO_HI_RA_RAM_USR_END__A   0x420060
+
+#define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A)
+#define DRXK_HI_ATOMIC_BUF_END   (SIO_HI_RA_RAM_USR_BEGIN__A + 7)
+#define DRXK_HI_ATOMIC_READ      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
+#define DRXK_HI_ATOMIC_WRITE     SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE
+
+#define DRXDAP_FASI_ADDR2BLOCK(addr)  (((addr) >> 22) & 0x3F)
+#define DRXDAP_FASI_ADDR2BANK(addr)   (((addr) >> 16) & 0x3F)
+#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF)
+
+static int ConfigureI2CBridge(struct drxk_state *state, bool bEnableBridge)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	if (state->m_DrxkState == DRXK_UNINITIALIZED)
+		goto error;
+	if (state->m_DrxkState == DRXK_POWERED_DOWN)
+		goto error;
+
+	if (state->no_i2c_bridge)
+		return 0;
+
+	status = write16(state, SIO_HI_RA_RAM_PAR_1__A, SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
+	if (status < 0)
+		goto error;
+	if (bEnableBridge) {
+		status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED);
+		if (status < 0)
+			goto error;
+	} else {
+		status = write16(state, SIO_HI_RA_RAM_PAR_2__A, SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN);
+		if (status < 0)
+			goto error;
+	}
+
+	status = HI_Command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, 0);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetPreSaw(struct drxk_state *state,
+		     struct SCfgPreSaw *pPreSawCfg)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	if ((pPreSawCfg == NULL)
+	    || (pPreSawCfg->reference > IQM_AF_PDREF__M))
+		goto error;
+
+	status = write16(state, IQM_AF_PDREF__A, pPreSawCfg->reference);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int BLDirectCmd(struct drxk_state *state, u32 targetAddr,
+		       u16 romOffset, u16 nrOfElements, u32 timeOut)
+{
+	u16 blStatus = 0;
+	u16 offset = (u16) ((targetAddr >> 0) & 0x00FFFF);
+	u16 blockbank = (u16) ((targetAddr >> 16) & 0x000FFF);
+	int status;
+	unsigned long end;
+
+	dprintk(1, "\n");
+
+	mutex_lock(&state->mutex);
+	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_TGT_HDR__A, blockbank);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_TGT_ADDR__A, offset);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_SRC_ADDR__A, romOffset);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_SRC_LEN__A, nrOfElements);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
+	if (status < 0)
+		goto error;
+
+	end = jiffies + msecs_to_jiffies(timeOut);
+	do {
+		status = read16(state, SIO_BL_STATUS__A, &blStatus);
+		if (status < 0)
+			goto error;
+	} while ((blStatus == 0x1) && time_is_after_jiffies(end));
+	if (blStatus == 0x1) {
+		printk(KERN_ERR "drxk: SIO not ready\n");
+		status = -EINVAL;
+		goto error2;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+error2:
+	mutex_unlock(&state->mutex);
+	return status;
+
+}
+
+static int ADCSyncMeasurement(struct drxk_state *state, u16 *count)
+{
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	/* Start measurement */
+	status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_START_LOCK__A, 1);
+	if (status < 0)
+		goto error;
+
+	*count = 0;
+	status = read16(state, IQM_AF_PHASE0__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == 127)
+		*count = *count + 1;
+	status = read16(state, IQM_AF_PHASE1__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == 127)
+		*count = *count + 1;
+	status = read16(state, IQM_AF_PHASE2__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == 127)
+		*count = *count + 1;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int ADCSynchronization(struct drxk_state *state)
+{
+	u16 count = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	status = ADCSyncMeasurement(state, &count);
+	if (status < 0)
+		goto error;
+
+	if (count == 1) {
+		/* Try sampling on a diffrent edge */
+		u16 clkNeg = 0;
+
+		status = read16(state, IQM_AF_CLKNEG__A, &clkNeg);
+		if (status < 0)
+			goto error;
+		if ((clkNeg | IQM_AF_CLKNEG_CLKNEGDATA__M) ==
+			IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) {
+			clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
+			clkNeg |=
+				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG;
+		} else {
+			clkNeg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
+			clkNeg |=
+				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS;
+		}
+		status = write16(state, IQM_AF_CLKNEG__A, clkNeg);
+		if (status < 0)
+			goto error;
+		status = ADCSyncMeasurement(state, &count);
+		if (status < 0)
+			goto error;
+	}
+
+	if (count < 2)
+		status = -EINVAL;
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetFrequencyShifter(struct drxk_state *state,
+			       u16 intermediateFreqkHz,
+			       s32 tunerFreqOffset, bool isDTV)
+{
+	bool selectPosImage = false;
+	u32 rfFreqResidual = tunerFreqOffset;
+	u32 fmFrequencyShift = 0;
+	bool tunerMirror = !state->m_bMirrorFreqSpect;
+	u32 adcFreq;
+	bool adcFlip;
+	int status;
+	u32 ifFreqActual;
+	u32 samplingFrequency = (u32) (state->m_sysClockFreq / 3);
+	u32 frequencyShift;
+	bool imageToSelect;
+
+	dprintk(1, "\n");
+
+	/*
+	   Program frequency shifter
+	   No need to account for mirroring on RF
+	 */
+	if (isDTV) {
+		if ((state->m_OperationMode == OM_QAM_ITU_A) ||
+		    (state->m_OperationMode == OM_QAM_ITU_C) ||
+		    (state->m_OperationMode == OM_DVBT))
+			selectPosImage = true;
+		else
+			selectPosImage = false;
+	}
+	if (tunerMirror)
+		/* tuner doesn't mirror */
+		ifFreqActual = intermediateFreqkHz +
+		    rfFreqResidual + fmFrequencyShift;
+	else
+		/* tuner mirrors */
+		ifFreqActual = intermediateFreqkHz -
+		    rfFreqResidual - fmFrequencyShift;
+	if (ifFreqActual > samplingFrequency / 2) {
+		/* adc mirrors */
+		adcFreq = samplingFrequency - ifFreqActual;
+		adcFlip = true;
+	} else {
+		/* adc doesn't mirror */
+		adcFreq = ifFreqActual;
+		adcFlip = false;
+	}
+
+	frequencyShift = adcFreq;
+	imageToSelect = state->m_rfmirror ^ tunerMirror ^
+	    adcFlip ^ selectPosImage;
+	state->m_IqmFsRateOfs =
+	    Frac28a((frequencyShift), samplingFrequency);
+
+	if (imageToSelect)
+		state->m_IqmFsRateOfs = ~state->m_IqmFsRateOfs + 1;
+
+	/* Program frequency shifter with tuner offset compensation */
+	/* frequencyShift += tunerFreqOffset; TODO */
+	status = write32(state, IQM_FS_RATE_OFS_LO__A,
+			 state->m_IqmFsRateOfs);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int InitAGC(struct drxk_state *state, bool isDTV)
+{
+	u16 ingainTgt = 0;
+	u16 ingainTgtMin = 0;
+	u16 ingainTgtMax = 0;
+	u16 clpCyclen = 0;
+	u16 clpSumMin = 0;
+	u16 clpDirTo = 0;
+	u16 snsSumMin = 0;
+	u16 snsSumMax = 0;
+	u16 clpSumMax = 0;
+	u16 snsDirTo = 0;
+	u16 kiInnergainMin = 0;
+	u16 ifIaccuHiTgt = 0;
+	u16 ifIaccuHiTgtMin = 0;
+	u16 ifIaccuHiTgtMax = 0;
+	u16 data = 0;
+	u16 fastClpCtrlDelay = 0;
+	u16 clpCtrlMode = 0;
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	/* Common settings */
+	snsSumMax = 1023;
+	ifIaccuHiTgtMin = 2047;
+	clpCyclen = 500;
+	clpSumMax = 1023;
+
+	/* AGCInit() not available for DVBT; init done in microcode */
+	if (!IsQAM(state)) {
+		printk(KERN_ERR "drxk: %s: mode %d is not DVB-C\n", __func__, state->m_OperationMode);
+		return -EINVAL;
+	}
+
+	/* FIXME: Analog TV AGC require different settings */
+
+	/* Standard specific settings */
+	clpSumMin = 8;
+	clpDirTo = (u16) -9;
+	clpCtrlMode = 0;
+	snsSumMin = 8;
+	snsDirTo = (u16) -9;
+	kiInnergainMin = (u16) -1030;
+	ifIaccuHiTgtMax = 0x2380;
+	ifIaccuHiTgt = 0x2380;
+	ingainTgtMin = 0x0511;
+	ingainTgt = 0x0511;
+	ingainTgtMax = 5119;
+	fastClpCtrlDelay = state->m_qamIfAgcCfg.FastClipCtrlDelay;
+
+	status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, fastClpCtrlDelay);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clpCtrlMode);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingainTgt);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingainTgtMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingainTgtMax);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, ifIaccuHiTgtMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, ifIaccuHiTgtMax);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clpSumMax);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, snsSumMax);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, kiInnergainMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, ifIaccuHiTgt);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clpCyclen);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clpSumMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, snsSumMin);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clpDirTo);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, snsDirTo);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500);
+	if (status < 0)
+		goto error;
+
+	/* Initialize inner-loop KI gain factors */
+	status = read16(state, SCU_RAM_AGC_KI__A, &data);
+	if (status < 0)
+		goto error;
+
+	data = 0x0657;
+	data &= ~SCU_RAM_AGC_KI_RF__M;
+	data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
+	data &= ~SCU_RAM_AGC_KI_IF__M;
+	data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
+
+	status = write16(state, SCU_RAM_AGC_KI__A, data);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTQAMGetAccPktErr(struct drxk_state *state, u16 *packetErr)
+{
+	int status;
+
+	dprintk(1, "\n");
+	if (packetErr == NULL)
+		status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
+	else
+		status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, packetErr);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTScCommand(struct drxk_state *state,
+			 u16 cmd, u16 subcmd,
+			 u16 param0, u16 param1, u16 param2,
+			 u16 param3, u16 param4)
+{
+	u16 curCmd = 0;
+	u16 errCode = 0;
+	u16 retryCnt = 0;
+	u16 scExec = 0;
+	int status;
+
+	dprintk(1, "\n");
+	status = read16(state, OFDM_SC_COMM_EXEC__A, &scExec);
+	if (scExec != 1) {
+		/* SC is not running */
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Wait until sc is ready to receive command */
+	retryCnt = 0;
+	do {
+		msleep(1);
+		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd);
+		retryCnt++;
+	} while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES));
+	if (retryCnt >= DRXK_MAX_RETRIES && (status < 0))
+		goto error;
+
+	/* Write sub-command */
+	switch (cmd) {
+		/* All commands using sub-cmd */
+	case OFDM_SC_RA_RAM_CMD_PROC_START:
+	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
+	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
+		status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd);
+		if (status < 0)
+			goto error;
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Write needed parameters and the command */
+	switch (cmd) {
+		/* All commands using 5 parameters */
+		/* All commands using 4 parameters */
+		/* All commands using 3 parameters */
+		/* All commands using 2 parameters */
+	case OFDM_SC_RA_RAM_CMD_PROC_START:
+	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
+	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
+		status = write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1);
+		/* All commands using 1 parameters */
+	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
+	case OFDM_SC_RA_RAM_CMD_USER_IO:
+		status = write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0);
+		/* All commands using 0 parameters */
+	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
+	case OFDM_SC_RA_RAM_CMD_NULL:
+		/* Write command */
+		status = write16(state, OFDM_SC_RA_RAM_CMD__A, cmd);
+		break;
+	default:
+		/* Unknown command */
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Wait until sc is ready processing command */
+	retryCnt = 0;
+	do {
+		msleep(1);
+		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &curCmd);
+		retryCnt++;
+	} while ((curCmd != 0) && (retryCnt < DRXK_MAX_RETRIES));
+	if (retryCnt >= DRXK_MAX_RETRIES && (status < 0))
+		goto error;
+
+	/* Check for illegal cmd */
+	status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &errCode);
+	if (errCode == 0xFFFF) {
+		/* illegal command */
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Retreive results parameters from SC */
+	switch (cmd) {
+		/* All commands yielding 5 results */
+		/* All commands yielding 4 results */
+		/* All commands yielding 3 results */
+		/* All commands yielding 2 results */
+		/* All commands yielding 1 result */
+	case OFDM_SC_RA_RAM_CMD_USER_IO:
+	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
+		status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0));
+		/* All commands yielding 0 results */
+	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
+	case OFDM_SC_RA_RAM_CMD_SET_TIMER:
+	case OFDM_SC_RA_RAM_CMD_PROC_START:
+	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
+	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
+	case OFDM_SC_RA_RAM_CMD_NULL:
+		break;
+	default:
+		/* Unknown command */
+		status = -EINVAL;
+		break;
+	}			/* switch (cmd->cmd) */
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int PowerUpDVBT(struct drxk_state *state)
+{
+	enum DRXPowerMode powerMode = DRX_POWER_UP;
+	int status;
+
+	dprintk(1, "\n");
+	status = CtrlPowerMode(state, &powerMode);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTCtrlSetIncEnable(struct drxk_state *state, bool *enabled)
+{
+	int status;
+
+	dprintk(1, "\n");
+	if (*enabled == true)
+		status = write16(state, IQM_CF_BYPASSDET__A, 0);
+	else
+		status = write16(state, IQM_CF_BYPASSDET__A, 1);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+#define DEFAULT_FR_THRES_8K     4000
+static int DVBTCtrlSetFrEnable(struct drxk_state *state, bool *enabled)
+{
+
+	int status;
+
+	dprintk(1, "\n");
+	if (*enabled == true) {
+		/* write mask to 1 */
+		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A,
+				   DEFAULT_FR_THRES_8K);
+	} else {
+		/* write mask to 0 */
+		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0);
+	}
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int DVBTCtrlSetEchoThreshold(struct drxk_state *state,
+				    struct DRXKCfgDvbtEchoThres_t *echoThres)
+{
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+	status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data);
+	if (status < 0)
+		goto error;
+
+	switch (echoThres->fftMode) {
+	case DRX_FFTMODE_2K:
+		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M;
+		data |= ((echoThres->threshold <<
+			OFDM_SC_RA_RAM_ECHO_THRES_2K__B)
+			& (OFDM_SC_RA_RAM_ECHO_THRES_2K__M));
+		break;
+	case DRX_FFTMODE_8K:
+		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M;
+		data |= ((echoThres->threshold <<
+			OFDM_SC_RA_RAM_ECHO_THRES_8K__B)
+			& (OFDM_SC_RA_RAM_ECHO_THRES_8K__M));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int DVBTCtrlSetSqiSpeed(struct drxk_state *state,
+			       enum DRXKCfgDvbtSqiSpeed *speed)
+{
+	int status = -EINVAL;
+
+	dprintk(1, "\n");
+
+	switch (*speed) {
+	case DRXK_DVBT_SQI_SPEED_FAST:
+	case DRXK_DVBT_SQI_SPEED_MEDIUM:
+	case DRXK_DVBT_SQI_SPEED_SLOW:
+		break;
+	default:
+		goto error;
+	}
+	status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A,
+			   (u16) *speed);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Activate DVBT specific presets
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+*
+* Called in DVBTSetStandard
+*
+*/
+static int DVBTActivatePresets(struct drxk_state *state)
+{
+	int status;
+	bool setincenable = false;
+	bool setfrenable = true;
+
+	struct DRXKCfgDvbtEchoThres_t echoThres2k = { 0, DRX_FFTMODE_2K };
+	struct DRXKCfgDvbtEchoThres_t echoThres8k = { 0, DRX_FFTMODE_8K };
+
+	dprintk(1, "\n");
+	status = DVBTCtrlSetIncEnable(state, &setincenable);
+	if (status < 0)
+		goto error;
+	status = DVBTCtrlSetFrEnable(state, &setfrenable);
+	if (status < 0)
+		goto error;
+	status = DVBTCtrlSetEchoThreshold(state, &echoThres2k);
+	if (status < 0)
+		goto error;
+	status = DVBTCtrlSetEchoThreshold(state, &echoThres8k);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, state->m_dvbtIfAgcCfg.IngainTgtMax);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Initialize channelswitch-independent settings for DVBT.
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+*
+* For ROM code channel filter taps are loaded from the bootloader. For microcode
+* the DVB-T taps from the drxk_filters.h are used.
+*/
+static int SetDVBTStandard(struct drxk_state *state,
+			   enum OperationMode oMode)
+{
+	u16 cmdResult = 0;
+	u16 data = 0;
+	int status;
+
+	dprintk(1, "\n");
+
+	PowerUpDVBT(state);
+	/* added antenna switch */
+	SwitchAntennaToDVBT(state);
+	/* send OFDM reset command */
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* send OFDM setenv command */
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* reset datapath for OFDM, processors first */
+	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
+	if (status < 0)
+		goto error;
+
+	/* IQM setup */
+	/* synchronize on ofdstate->m_festart */
+	status = write16(state, IQM_AF_UPD_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	/* window size for clipping ADC detection */
+	status = write16(state, IQM_AF_CLP_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	/* window size for for sense pre-SAW detection */
+	status = write16(state, IQM_AF_SNS_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	/* sense threshold for sense pre-SAW detection */
+	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
+	if (status < 0)
+		goto error;
+	status = SetIqmAf(state, true);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_AF_AGC_RF__A, 0);
+	if (status < 0)
+		goto error;
+
+	/* Impulse noise cruncher setup */
+	status = write16(state, IQM_AF_INC_LCT__A, 0);	/* crunch in IQM_CF */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DET_LCT__A, 0);	/* detect in IQM_CF */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_WND_LEN__A, 3);	/* peak detector window length */
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_RC_STRETCH__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_OUT_ENA__A, 0x4);	/* enable output 2 */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DS_ENA__A, 0x4);	/* decimate output 2 */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_SCALE__A, 1600);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_SCALE_SH__A, 0);
+	if (status < 0)
+		goto error;
+
+	/* virtual clipping threshold for clipping ADC detection */
+	status = write16(state, IQM_AF_CLP_TH__A, 448);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DATATH__A, 495);	/* crunching threshold */
+	if (status < 0)
+		goto error;
+
+	status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_CF_PKDTH__A, 2);	/* peak detector threshold */
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2);
+	if (status < 0)
+		goto error;
+	/* enable power measurement interrupt */
+	status = write16(state, IQM_CF_COMM_INT_MSK__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* IQM will not be reset from here, sync ADC and update/init AGC */
+	status = ADCSynchronization(state);
+	if (status < 0)
+		goto error;
+	status = SetPreSaw(state, &state->m_dvbtPreSawCfg);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	status = SetAgcRf(state, &state->m_dvbtRfAgcCfg, true);
+	if (status < 0)
+		goto error;
+	status = SetAgcIf(state, &state->m_dvbtIfAgcCfg, true);
+	if (status < 0)
+		goto error;
+
+	/* Set Noise Estimation notch width and enable DC fix */
+	status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data);
+	if (status < 0)
+		goto error;
+	data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M;
+	status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data);
+	if (status < 0)
+		goto error;
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	if (!state->m_DRXK_A3_ROM_CODE) {
+		/* AGCInit() is not done for DVBT, so set agcFastClipCtrlDelay  */
+		status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, state->m_dvbtIfAgcCfg.FastClipCtrlDelay);
+		if (status < 0)
+			goto error;
+	}
+
+	/* OFDM_SC setup */
+#ifdef COMPILE_FOR_NONRT
+	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2);
+	if (status < 0)
+		goto error;
+#endif
+
+	/* FEC setup */
+	status = write16(state, FEC_DI_INPUT_CTL__A, 1);	/* OFDM input */
+	if (status < 0)
+		goto error;
+
+
+#ifdef COMPILE_FOR_NONRT
+	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400);
+	if (status < 0)
+		goto error;
+#else
+	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000);
+	if (status < 0)
+		goto error;
+#endif
+	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001);
+	if (status < 0)
+		goto error;
+
+	/* Setup MPEG bus */
+	status = MPEGTSDtoSetup(state, OM_DVBT);
+	if (status < 0)
+		goto error;
+	/* Set DVBT Presets */
+	status = DVBTActivatePresets(state);
+	if (status < 0)
+		goto error;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+/**
+* \brief Start dvbt demodulating for channel.
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+*/
+static int DVBTStart(struct drxk_state *state)
+{
+	u16 param1;
+	int status;
+	/* DRXKOfdmScCmd_t scCmd; */
+
+	dprintk(1, "\n");
+	/* Start correct processes to get in lock */
+	/* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */
+	param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN;
+	status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, 0, 0, 0);
+	if (status < 0)
+		goto error;
+	/* Start FEC OC */
+	status = MPEGTSStart(state);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+
+/*============================================================================*/
+
+/**
+* \brief Set up dvbt demodulator for channel.
+* \param demod instance of demodulator.
+* \return DRXStatus_t.
+* // original DVBTSetChannel()
+*/
+static int SetDVBT(struct drxk_state *state, u16 IntermediateFreqkHz,
+		   s32 tunerFreqOffset)
+{
+	u16 cmdResult = 0;
+	u16 transmissionParams = 0;
+	u16 operationMode = 0;
+	u32 iqmRcRateOfs = 0;
+	u32 bandwidth = 0;
+	u16 param1;
+	int status;
+
+	dprintk(1, "IF =%d, TFO = %d\n", IntermediateFreqkHz, tunerFreqOffset);
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	/* Stop processors */
+	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+
+	/* Mandatory fix, always stop CP, required to set spl offset back to
+		hardware default (is set to 0 by ucode during pilot detection */
+	status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+
+	/*== Write channel settings to device =====================================*/
+
+	/* mode */
+	switch (state->param.u.ofdm.transmission_mode) {
+	case TRANSMISSION_MODE_AUTO:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M;
+		/* fall through , try first guess DRX_FFTMODE_8K */
+	case TRANSMISSION_MODE_8K:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K;
+		break;
+	case TRANSMISSION_MODE_2K:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K;
+		break;
+	}
+
+	/* guard */
+	switch (state->param.u.ofdm.guard_interval) {
+	default:
+	case GUARD_INTERVAL_AUTO:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M;
+		/* fall through , try first guess DRX_GUARD_1DIV4 */
+	case GUARD_INTERVAL_1_4:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4;
+		break;
+	case GUARD_INTERVAL_1_32:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32;
+		break;
+	case GUARD_INTERVAL_1_16:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16;
+		break;
+	case GUARD_INTERVAL_1_8:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8;
+		break;
+	}
+
+	/* hierarchy */
+	switch (state->param.u.ofdm.hierarchy_information) {
+	case HIERARCHY_AUTO:
+	case HIERARCHY_NONE:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M;
+		/* fall through , try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
+		/* transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */
+		/* break; */
+	case HIERARCHY_1:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1;
+		break;
+	case HIERARCHY_2:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2;
+		break;
+	case HIERARCHY_4:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4;
+		break;
+	}
+
+
+	/* constellation */
+	switch (state->param.u.ofdm.constellation) {
+	case QAM_AUTO:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M;
+		/* fall through , try first guess DRX_CONSTELLATION_QAM64 */
+	case QAM_64:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64;
+		break;
+	case QPSK:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK;
+		break;
+	case QAM_16:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16;
+		break;
+	}
+#if 0
+	/* No hierachical channels support in BDA */
+	/* Priority (only for hierarchical channels) */
+	switch (channel->priority) {
+	case DRX_PRIORITY_LOW:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO;
+		WR16(devAddr, OFDM_EC_SB_PRIOR__A,
+			OFDM_EC_SB_PRIOR_LO);
+		break;
+	case DRX_PRIORITY_HIGH:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
+		WR16(devAddr, OFDM_EC_SB_PRIOR__A,
+			OFDM_EC_SB_PRIOR_HI));
+		break;
+	case DRX_PRIORITY_UNKNOWN:	/* fall through */
+	default:
+		status = -EINVAL;
+		goto error;
+	}
+#else
+	/* Set Priorty high */
+	transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
+	status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI);
+	if (status < 0)
+		goto error;
+#endif
+
+	/* coderate */
+	switch (state->param.u.ofdm.code_rate_HP) {
+	case FEC_AUTO:
+	default:
+		operationMode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M;
+		/* fall through , try first guess DRX_CODERATE_2DIV3 */
+	case FEC_2_3:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3;
+		break;
+	case FEC_1_2:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2;
+		break;
+	case FEC_3_4:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4;
+		break;
+	case FEC_5_6:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6;
+		break;
+	case FEC_7_8:
+		transmissionParams |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8;
+		break;
+	}
+
+	/* SAW filter selection: normaly not necesarry, but if wanted
+		the application can select a SAW filter via the driver by using UIOs */
+	/* First determine real bandwidth (Hz) */
+	/* Also set delay for impulse noise cruncher */
+	/* Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is changed
+		by SC for fix for some 8K,1/8 guard but is restored by InitEC and ResetEC
+		functions */
+	switch (state->param.u.ofdm.bandwidth) {
+	case BANDWIDTH_AUTO:
+	case BANDWIDTH_8_MHZ:
+		bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ;
+		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3052);
+		if (status < 0)
+			goto error;
+		/* cochannel protection for PAL 8 MHz */
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 7);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 7);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 7);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
+		if (status < 0)
+			goto error;
+		break;
+	case BANDWIDTH_7_MHZ:
+		bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ;
+		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 3491);
+		if (status < 0)
+			goto error;
+		/* cochannel protection for PAL 7 MHz */
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 8);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 8);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 4);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
+		if (status < 0)
+			goto error;
+		break;
+	case BANDWIDTH_6_MHZ:
+		bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ;
+		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, 4073);
+		if (status < 0)
+			goto error;
+		/* cochannel protection for NTSC 6 MHz */
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, 19);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, 19);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, 14);
+		if (status < 0)
+			goto error;
+		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, 1);
+		if (status < 0)
+			goto error;
+		break;
+	default:
+		status = -EINVAL;
+		goto error;
+	}
+
+	if (iqmRcRateOfs == 0) {
+		/* Now compute IQM_RC_RATE_OFS
+			(((SysFreq/BandWidth)/2)/2) -1) * 2^23)
+			=>
+			((SysFreq / BandWidth) * (2^21)) - (2^23)
+			*/
+		/* (SysFreq / BandWidth) * (2^28)  */
+		/* assert (MAX(sysClk)/MIN(bandwidth) < 16)
+			=> assert(MAX(sysClk) < 16*MIN(bandwidth))
+			=> assert(109714272 > 48000000) = true so Frac 28 can be used  */
+		iqmRcRateOfs = Frac28a((u32)
+					((state->m_sysClockFreq *
+						1000) / 3), bandwidth);
+		/* (SysFreq / BandWidth) * (2^21), rounding before truncating  */
+		if ((iqmRcRateOfs & 0x7fL) >= 0x40)
+			iqmRcRateOfs += 0x80L;
+		iqmRcRateOfs = iqmRcRateOfs >> 7;
+		/* ((SysFreq / BandWidth) * (2^21)) - (2^23)  */
+		iqmRcRateOfs = iqmRcRateOfs - (1 << 23);
+	}
+
+	iqmRcRateOfs &=
+		((((u32) IQM_RC_RATE_OFS_HI__M) <<
+		IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M);
+	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRateOfs);
+	if (status < 0)
+		goto error;
+
+	/* Bandwidth setting done */
+
+#if 0
+	status = DVBTSetFrequencyShift(demod, channel, tunerOffset);
+	if (status < 0)
+		goto error;
+#endif
+	status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true);
+	if (status < 0)
+		goto error;
+
+	/*== Start SC, write channel settings to SC ===============================*/
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* Enable SC after setting all other parameters */
+	status = write16(state, OFDM_SC_COMM_STATE__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, OFDM_SC_COMM_EXEC__A, 1);
+	if (status < 0)
+		goto error;
+
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* Write SC parameter registers, set all AUTO flags in operation mode */
+	param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M |
+			OFDM_SC_RA_RAM_OP_AUTO_GUARD__M |
+			OFDM_SC_RA_RAM_OP_AUTO_CONST__M |
+			OFDM_SC_RA_RAM_OP_AUTO_HIER__M |
+			OFDM_SC_RA_RAM_OP_AUTO_RATE__M);
+	status = DVBTScCommand(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM,
+				0, transmissionParams, param1, 0, 0, 0);
+	if (status < 0)
+		goto error;
+
+	if (!state->m_DRXK_A3_ROM_CODE)
+		status = DVBTCtrlSetSqiSpeed(state, &state->m_sqiSpeed);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+
+/*============================================================================*/
+
+/**
+* \brief Retreive lock status .
+* \param demod    Pointer to demodulator instance.
+* \param lockStat Pointer to lock status structure.
+* \return DRXStatus_t.
+*
+*/
+static int GetDVBTLockStatus(struct drxk_state *state, u32 *pLockStatus)
+{
+	int status;
+	const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M |
+				    OFDM_SC_RA_RAM_LOCK_FEC__M);
+	const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M);
+	const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M;
+
+	u16 ScRaRamLock = 0;
+	u16 ScCommExec = 0;
+
+	dprintk(1, "\n");
+
+	*pLockStatus = NOT_LOCKED;
+	/* driver 0.9.0 */
+	/* Check if SC is running */
+	status = read16(state, OFDM_SC_COMM_EXEC__A, &ScCommExec);
+	if (status < 0)
+		goto end;
+	if (ScCommExec == OFDM_SC_COMM_EXEC_STOP)
+		goto end;
+
+	status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &ScRaRamLock);
+	if (status < 0)
+		goto end;
+
+	if ((ScRaRamLock & mpeg_lock_mask) == mpeg_lock_mask)
+		*pLockStatus = MPEG_LOCK;
+	else if ((ScRaRamLock & fec_lock_mask) == fec_lock_mask)
+		*pLockStatus = FEC_LOCK;
+	else if ((ScRaRamLock & demod_lock_mask) == demod_lock_mask)
+		*pLockStatus = DEMOD_LOCK;
+	else if (ScRaRamLock & OFDM_SC_RA_RAM_LOCK_NODVBT__M)
+		*pLockStatus = NEVER_LOCK;
+end:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int PowerUpQAM(struct drxk_state *state)
+{
+	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
+	int status;
+
+	dprintk(1, "\n");
+	status = CtrlPowerMode(state, &powerMode);
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+
+/** Power Down QAM */
+static int PowerDownQAM(struct drxk_state *state)
+{
+	u16 data = 0;
+	u16 cmdResult;
+	int status = 0;
+
+	dprintk(1, "\n");
+	status = read16(state, SCU_COMM_EXEC__A, &data);
+	if (status < 0)
+		goto error;
+	if (data == SCU_COMM_EXEC_ACTIVE) {
+		/*
+			STOP demodulator
+			QAM and HW blocks
+			*/
+		/* stop all comstate->m_exec */
+		status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_STOP, 0, NULL, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+	}
+	/* powerdown AFE                   */
+	status = SetIqmAf(state, false);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Setup of the QAM Measurement intervals for signal quality
+* \param demod instance of demod.
+* \param constellation current constellation.
+* \return DRXStatus_t.
+*
+*  NOTE:
+*  Take into account that for certain settings the errorcounters can overflow.
+*  The implementation does not check this.
+*
+*/
+static int SetQAMMeasurement(struct drxk_state *state,
+			     enum EDrxkConstellation constellation,
+			     u32 symbolRate)
+{
+	u32 fecBitsDesired = 0;	/* BER accounting period */
+	u32 fecRsPeriodTotal = 0;	/* Total period */
+	u16 fecRsPrescale = 0;	/* ReedSolomon Measurement Prescale */
+	u16 fecRsPeriod = 0;	/* Value for corresponding I2C register */
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	fecRsPrescale = 1;
+	/* fecBitsDesired = symbolRate [kHz] *
+		FrameLenght [ms] *
+		(constellation + 1) *
+		SyncLoss (== 1) *
+		ViterbiLoss (==1)
+		*/
+	switch (constellation) {
+	case DRX_CONSTELLATION_QAM16:
+		fecBitsDesired = 4 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM32:
+		fecBitsDesired = 5 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM64:
+		fecBitsDesired = 6 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM128:
+		fecBitsDesired = 7 * symbolRate;
+		break;
+	case DRX_CONSTELLATION_QAM256:
+		fecBitsDesired = 8 * symbolRate;
+		break;
+	default:
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	fecBitsDesired /= 1000;	/* symbolRate [Hz] -> symbolRate [kHz]  */
+	fecBitsDesired *= 500;	/* meas. period [ms] */
+
+	/* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */
+	/* fecRsPeriodTotal = fecBitsDesired / 1632 */
+	fecRsPeriodTotal = (fecBitsDesired / 1632UL) + 1;	/* roughly ceil */
+
+	/* fecRsPeriodTotal =  fecRsPrescale * fecRsPeriod  */
+	fecRsPrescale = 1 + (u16) (fecRsPeriodTotal >> 16);
+	if (fecRsPrescale == 0) {
+		/* Divide by zero (though impossible) */
+		status = -EINVAL;
+		if (status < 0)
+			goto error;
+	}
+	fecRsPeriod =
+		((u16) fecRsPeriodTotal +
+		(fecRsPrescale >> 1)) / fecRsPrescale;
+
+	/* write corresponding registers */
+	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fecRsPeriod);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, fecRsPrescale);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fecRsPeriod);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetQAM16(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517);
+	if (status < 0)
+		goto error;
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM16);
+	if (status < 0)
+		goto error;
+
+	/* QAM Loop Controller Coeficients */
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127);
+	if (status < 0)
+		goto error;
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM32 specific setup
+* \param demod instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM32(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM32);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM64 specific setup
+* \param demod instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM64(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM64);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM128 specific setup
+* \param demod: instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM128(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Slicer Settings */
+
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM128);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
+	if (status < 0)
+		goto error;
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief QAM256 specific setup
+* \param demod: instance of demod.
+* \return DRXStatus_t.
+*/
+static int SetQAM256(struct drxk_state *state)
+{
+	int status = 0;
+
+	dprintk(1, "\n");
+	/* QAM Equalizer Setup */
+	/* Equalizer */
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385);
+	if (status < 0)
+		goto error;
+
+	/* Decision Feedback Equalizer */
+	status = write16(state, QAM_DQ_QUAL_FUN0__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN1__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN2__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN3__A, 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN4__A, 6);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
+	if (status < 0)
+		goto error;
+
+	/* QAM Slicer Settings */
+
+	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, DRXK_QAM_SL_SIG_POWER_QAM256);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM Loop Controller Coeficients */
+
+	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM State Machine (FSM) Thresholds */
+
+	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
+	if (status < 0)
+		goto error;
+
+
+	/* QAM FSM Tracking Parameters */
+
+	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+
+/*============================================================================*/
+/**
+* \brief Reset QAM block.
+* \param demod:   instance of demod.
+* \param channel: pointer to channel data.
+* \return DRXStatus_t.
+*/
+static int QAMResetQAM(struct drxk_state *state)
+{
+	int status;
+	u16 cmdResult;
+
+	dprintk(1, "\n");
+	/* Stop QAM comstate->m_exec */
+	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_RESET, 0, NULL, 1, &cmdResult);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Set QAM symbolrate.
+* \param demod:   instance of demod.
+* \param channel: pointer to channel data.
+* \return DRXStatus_t.
+*/
+static int QAMSetSymbolrate(struct drxk_state *state)
+{
+	u32 adcFrequency = 0;
+	u32 symbFreq = 0;
+	u32 iqmRcRate = 0;
+	u16 ratesel = 0;
+	u32 lcSymbRate = 0;
+	int status;
+
+	dprintk(1, "\n");
+	/* Select & calculate correct IQM rate */
+	adcFrequency = (state->m_sysClockFreq * 1000) / 3;
+	ratesel = 0;
+	/* printk(KERN_DEBUG "drxk: SR %d\n", state->param.u.qam.symbol_rate); */
+	if (state->param.u.qam.symbol_rate <= 1188750)
+		ratesel = 3;
+	else if (state->param.u.qam.symbol_rate <= 2377500)
+		ratesel = 2;
+	else if (state->param.u.qam.symbol_rate <= 4755000)
+		ratesel = 1;
+	status = write16(state, IQM_FD_RATESEL__A, ratesel);
+	if (status < 0)
+		goto error;
+
+	/*
+		IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23)
+		*/
+	symbFreq = state->param.u.qam.symbol_rate * (1 << ratesel);
+	if (symbFreq == 0) {
+		/* Divide by zero */
+		status = -EINVAL;
+		goto error;
+	}
+	iqmRcRate = (adcFrequency / symbFreq) * (1 << 21) +
+		(Frac28a((adcFrequency % symbFreq), symbFreq) >> 7) -
+		(1 << 23);
+	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqmRcRate);
+	if (status < 0)
+		goto error;
+	state->m_iqmRcRate = iqmRcRate;
+	/*
+		LcSymbFreq = round (.125 *  symbolrate / adcFreq * (1<<15))
+		*/
+	symbFreq = state->param.u.qam.symbol_rate;
+	if (adcFrequency == 0) {
+		/* Divide by zero */
+		status = -EINVAL;
+		goto error;
+	}
+	lcSymbRate = (symbFreq / adcFrequency) * (1 << 12) +
+		(Frac28a((symbFreq % adcFrequency), adcFrequency) >>
+		16);
+	if (lcSymbRate > 511)
+		lcSymbRate = 511;
+	status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lcSymbRate);
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+/*============================================================================*/
+
+/**
+* \brief Get QAM lock status.
+* \param demod:   instance of demod.
+* \param channel: pointer to channel data.
+* \return DRXStatus_t.
+*/
+
+static int GetQAMLockStatus(struct drxk_state *state, u32 *pLockStatus)
+{
+	int status;
+	u16 Result[2] = { 0, 0 };
+
+	dprintk(1, "\n");
+	*pLockStatus = NOT_LOCKED;
+	status = scu_command(state,
+			SCU_RAM_COMMAND_STANDARD_QAM |
+			SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2,
+			Result);
+	if (status < 0)
+		printk(KERN_ERR "drxk: %s status = %08x\n", __func__, status);
+
+	if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) {
+		/* 0x0000 NOT LOCKED */
+	} else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) {
+		/* 0x4000 DEMOD LOCKED */
+		*pLockStatus = DEMOD_LOCK;
+	} else if (Result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) {
+		/* 0x8000 DEMOD + FEC LOCKED (system lock) */
+		*pLockStatus = MPEG_LOCK;
+	} else {
+		/* 0xC000 NEVER LOCKED */
+		/* (system will never be able to lock to the signal) */
+		/* TODO: check this, intermediate & standard specific lock states are not
+		   taken into account here */
+		*pLockStatus = NEVER_LOCK;
+	}
+	return status;
+}
+
+#define QAM_MIRROR__M         0x03
+#define QAM_MIRROR_NORMAL     0x00
+#define QAM_MIRRORED          0x01
+#define QAM_MIRROR_AUTO_ON    0x02
+#define QAM_LOCKRANGE__M      0x10
+#define QAM_LOCKRANGE_NORMAL  0x10
+
+static int SetQAM(struct drxk_state *state, u16 IntermediateFreqkHz,
+		  s32 tunerFreqOffset)
+{
+	int status;
+	u16 setParamParameters[4] = { 0, 0, 0, 0 };
+	u16 cmdResult;
+
+	dprintk(1, "\n");
+	/*
+	 * STEP 1: reset demodulator
+	 *	resets FEC DI and FEC RS
+	 *	resets QAM block
+	 *	resets SCU variables
+	 */
+	status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP);
+	if (status < 0)
+		goto error;
+	status = QAMResetQAM(state);
+	if (status < 0)
+		goto error;
+
+	/*
+	 * STEP 2: configure demodulator
+	 *	-set params; resets IQM,QAM,FEC HW; initializes some
+	 *       SCU variables
+	 */
+	status = QAMSetSymbolrate(state);
+	if (status < 0)
+		goto error;
+
+	/* Set params */
+	switch (state->param.u.qam.modulation) {
+	case QAM_256:
+		state->m_Constellation = DRX_CONSTELLATION_QAM256;
+		break;
+	case QAM_AUTO:
+	case QAM_64:
+		state->m_Constellation = DRX_CONSTELLATION_QAM64;
+		break;
+	case QAM_16:
+		state->m_Constellation = DRX_CONSTELLATION_QAM16;
+		break;
+	case QAM_32:
+		state->m_Constellation = DRX_CONSTELLATION_QAM32;
+		break;
+	case QAM_128:
+		state->m_Constellation = DRX_CONSTELLATION_QAM128;
+		break;
+	default:
+		status = -EINVAL;
+		break;
+	}
+	if (status < 0)
+		goto error;
+	setParamParameters[0] = state->m_Constellation;	/* constellation     */
+	setParamParameters[1] = DRXK_QAM_I12_J17;	/* interleave mode   */
+	if (state->m_OperationMode == OM_QAM_ITU_C)
+		setParamParameters[2] = QAM_TOP_ANNEX_C;
+	else
+		setParamParameters[2] = QAM_TOP_ANNEX_A;
+	setParamParameters[3] |= (QAM_MIRROR_AUTO_ON);
+	/* Env parameters */
+	/* check for LOCKRANGE Extented */
+	/* setParamParameters[3] |= QAM_LOCKRANGE_NORMAL; */
+
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 4, setParamParameters, 1, &cmdResult);
+	if (status < 0) {
+		/* Fall-back to the simpler call */
+		if (state->m_OperationMode == OM_QAM_ITU_C)
+			setParamParameters[0] = QAM_TOP_ANNEX_C;
+		else
+			setParamParameters[0] = QAM_TOP_ANNEX_A;
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, 1, setParamParameters, 1, &cmdResult);
+		if (status < 0)
+			goto error;
+
+		setParamParameters[0] = state->m_Constellation; /* constellation     */
+		setParamParameters[1] = DRXK_QAM_I12_J17;       /* interleave mode   */
+		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, 2, setParamParameters, 1, &cmdResult);
+	}
+	if (status < 0)
+		goto error;
+
+	/*
+	 * STEP 3: enable the system in a mode where the ADC provides valid
+	 * signal setup constellation independent registers
+	 */
+#if 0
+	status = SetFrequency(channel, tunerFreqOffset));
+	if (status < 0)
+		goto error;
+#endif
+	status = SetFrequencyShifter(state, IntermediateFreqkHz, tunerFreqOffset, true);
+	if (status < 0)
+		goto error;
+
+	/* Setup BER measurement */
+	status = SetQAMMeasurement(state, state->m_Constellation, state->param.u. qam.symbol_rate);
+	if (status < 0)
+		goto error;
+
+	/* Reset default values */
+	status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE);
+	if (status < 0)
+		goto error;
+
+	/* Reset default LC values */
+	status = write16(state, QAM_LC_RATE_LIMIT__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_LPF_FACTORP__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_LPF_FACTORI__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_MODE__A, 7);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, QAM_LC_QUAL_TAB0__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB1__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB2__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB3__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB4__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB5__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB6__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB8__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB9__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB10__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB12__A, 2);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB15__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB16__A, 3);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB20__A, 4);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_LC_QUAL_TAB25__A, 4);
+	if (status < 0)
+		goto error;
+
+	/* Mirroring, QAM-block starting point not inverted */
+	status = write16(state, QAM_SY_SP_INV__A, QAM_SY_SP_INV_SPECTRUM_INV_DIS);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	/* STEP 4: constellation specific setup */
+	switch (state->param.u.qam.modulation) {
+	case QAM_16:
+		status = SetQAM16(state);
+		break;
+	case QAM_32:
+		status = SetQAM32(state);
+		break;
+	case QAM_AUTO:
+	case QAM_64:
+		status = SetQAM64(state);
+		break;
+	case QAM_128:
+		status = SetQAM128(state);
+		break;
+	case QAM_256:
+		status = SetQAM256(state);
+		break;
+	default:
+		status = -EINVAL;
+		break;
+	}
+	if (status < 0)
+		goto error;
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* Re-configure MPEG output, requires knowledge of channel bitrate */
+	/* extAttr->currentChannel.constellation = channel->constellation; */
+	/* extAttr->currentChannel.symbolrate    = channel->symbolrate; */
+	status = MPEGTSDtoSetup(state, state->m_OperationMode);
+	if (status < 0)
+		goto error;
+
+	/* Start processes */
+	status = MPEGTSStart(state);
+	if (status < 0)
+		goto error;
+	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
+	if (status < 0)
+		goto error;
+
+	/* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */
+	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | SCU_RAM_COMMAND_CMD_DEMOD_START, 0, NULL, 1, &cmdResult);
+	if (status < 0)
+		goto error;
+
+	/* update global DRXK data container */
+/*?     extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */
+
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SetQAMStandard(struct drxk_state *state,
+			  enum OperationMode oMode)
+{
+	int status;
+#ifdef DRXK_QAM_TAPS
+#define DRXK_QAMA_TAPS_SELECT
+#include "drxk_filters.h"
+#undef DRXK_QAMA_TAPS_SELECT
+#endif
+
+	dprintk(1, "\n");
+
+	/* added antenna switch */
+	SwitchAntennaToQAM(state);
+
+	/* Ensure correct power-up mode */
+	status = PowerUpQAM(state);
+	if (status < 0)
+		goto error;
+	/* Reset QAM block */
+	status = QAMResetQAM(state);
+	if (status < 0)
+		goto error;
+
+	/* Setup IQM */
+
+	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
+	if (status < 0)
+		goto error;
+
+	/* Upload IQM Channel Filter settings by
+		boot loader from ROM table */
+	switch (oMode) {
+	case OM_QAM_ITU_A:
+		status = BLChainCmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+		break;
+	case OM_QAM_ITU_C:
+		status = BLDirectCmd(state, IQM_CF_TAP_RE0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+		if (status < 0)
+			goto error;
+		status = BLDirectCmd(state, IQM_CF_TAP_IM0__A, DRXK_BL_ROM_OFFSET_TAPS_ITU_C, DRXK_BLDC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
+		break;
+	default:
+		status = -EINVAL;
+	}
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_CF_OUT_ENA__A, (1 << IQM_CF_OUT_ENA_QAM__B));
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_SYMMETRIC__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_MIDTAP__A, ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B)));
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_RC_STRETCH__A, 21);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_CLP_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_CLP_TH__A, 448);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_SNS_LEN__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, IQM_FS_ADJ_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_RC_ADJ_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_ADJ_SEL__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_UPD_SEL__A, 0);
+	if (status < 0)
+		goto error;
+
+	/* IQM Impulse Noise Processing Unit */
+	status = write16(state, IQM_CF_CLP_VAL__A, 500);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DATATH__A, 1000);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_BYPASSDET__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_DET_LCT__A, 0);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_WND_LEN__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_CF_PKDTH__A, 1);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_INC_BYPASS__A, 1);
+	if (status < 0)
+		goto error;
+
+	/* turn on IQMAF. Must be done before setAgc**() */
+	status = SetIqmAf(state, true);
+	if (status < 0)
+		goto error;
+	status = write16(state, IQM_AF_START_LOCK__A, 0x01);
+	if (status < 0)
+		goto error;
+
+	/* IQM will not be reset from here, sync ADC and update/init AGC */
+	status = ADCSynchronization(state);
+	if (status < 0)
+		goto error;
+
+	/* Set the FSM step period */
+	status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000);
+	if (status < 0)
+		goto error;
+
+	/* Halt SCU to enable safe non-atomic accesses */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
+	if (status < 0)
+		goto error;
+
+	/* No more resets of the IQM, current standard correctly set =>
+		now AGCs can be configured. */
+
+	status = InitAGC(state, true);
+	if (status < 0)
+		goto error;
+	status = SetPreSaw(state, &(state->m_qamPreSawCfg));
+	if (status < 0)
+		goto error;
+
+	/* Configure AGC's */
+	status = SetAgcRf(state, &(state->m_qamRfAgcCfg), true);
+	if (status < 0)
+		goto error;
+	status = SetAgcIf(state, &(state->m_qamIfAgcCfg), true);
+	if (status < 0)
+		goto error;
+
+	/* Activate SCU to enable SCU commands */
+	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int WriteGPIO(struct drxk_state *state)
+{
+	int status;
+	u16 value = 0;
+
+	dprintk(1, "\n");
+	/* stop lock indicator process */
+	status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+	if (status < 0)
+		goto error;
+
+	/*  Write magic word to enable pdr reg write               */
+	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
+	if (status < 0)
+		goto error;
+
+	if (state->m_hasSAWSW) {
+		if (state->UIO_mask & 0x0001) { /* UIO-1 */
+			/* write to io pad configuration register - output mode */
+			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
+			if (status < 0)
+				goto error;
+
+			/* use corresponding bit in io data output registar */
+			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
+			if (status < 0)
+				goto error;
+			if ((state->m_GPIO & 0x0001) == 0)
+				value &= 0x7FFF;	/* write zero to 15th bit - 1st UIO */
+			else
+				value |= 0x8000;	/* write one to 15th bit - 1st UIO */
+			/* write back to io data output register */
+			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
+			if (status < 0)
+				goto error;
+		}
+		if (state->UIO_mask & 0x0002) { /* UIO-2 */
+			/* write to io pad configuration register - output mode */
+			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
+			if (status < 0)
+				goto error;
+
+			/* use corresponding bit in io data output registar */
+			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
+			if (status < 0)
+				goto error;
+			if ((state->m_GPIO & 0x0002) == 0)
+				value &= 0xBFFF;	/* write zero to 14th bit - 2st UIO */
+			else
+				value |= 0x4000;	/* write one to 14th bit - 2st UIO */
+			/* write back to io data output register */
+			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
+			if (status < 0)
+				goto error;
+		}
+		if (state->UIO_mask & 0x0004) { /* UIO-3 */
+			/* write to io pad configuration register - output mode */
+			status = write16(state, SIO_PDR_SMA_TX_CFG__A, state->m_GPIOCfg);
+			if (status < 0)
+				goto error;
+
+			/* use corresponding bit in io data output registar */
+			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
+			if (status < 0)
+				goto error;
+			if ((state->m_GPIO & 0x0004) == 0)
+				value &= 0xFFFB;            /* write zero to 2nd bit - 3rd UIO */
+			else
+				value |= 0x0004;            /* write one to 2nd bit - 3rd UIO */
+			/* write back to io data output register */
+			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
+			if (status < 0)
+				goto error;
+		}
+	}
+	/*  Write magic word to disable pdr reg write               */
+	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SwitchAntennaToQAM(struct drxk_state *state)
+{
+	int status = 0;
+	bool gpio_state;
+
+	dprintk(1, "\n");
+
+	if (!state->antenna_gpio)
+		return 0;
+
+	gpio_state = state->m_GPIO & state->antenna_gpio;
+
+	if (state->antenna_dvbt ^ gpio_state) {
+		/* Antenna is on DVB-T mode. Switch */
+		if (state->antenna_dvbt)
+			state->m_GPIO &= ~state->antenna_gpio;
+		else
+			state->m_GPIO |= state->antenna_gpio;
+		status = WriteGPIO(state);
+	}
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+static int SwitchAntennaToDVBT(struct drxk_state *state)
+{
+	int status = 0;
+	bool gpio_state;
+
+	dprintk(1, "\n");
+
+	if (!state->antenna_gpio)
+		return 0;
+
+	gpio_state = state->m_GPIO & state->antenna_gpio;
+
+	if (!(state->antenna_dvbt ^ gpio_state)) {
+		/* Antenna is on DVB-C mode. Switch */
+		if (state->antenna_dvbt)
+			state->m_GPIO |= state->antenna_gpio;
+		else
+			state->m_GPIO &= ~state->antenna_gpio;
+		status = WriteGPIO(state);
+	}
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+	return status;
+}
+
+
+static int PowerDownDevice(struct drxk_state *state)
+{
+	/* Power down to requested mode */
+	/* Backup some register settings */
+	/* Set pins with possible pull-ups connected to them in input mode */
+	/* Analog power down */
+	/* ADC power down */
+	/* Power down device */
+	int status;
+
+	dprintk(1, "\n");
+	if (state->m_bPDownOpenBridge) {
+		/* Open I2C bridge before power down of DRXK */
+		status = ConfigureI2CBridge(state, true);
+		if (status < 0)
+			goto error;
+	}
+	/* driver 0.9.0 */
+	status = DVBTEnableOFDMTokenRing(state, false);
+	if (status < 0)
+		goto error;
+
+	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_CLOCK);
+	if (status < 0)
+		goto error;
+	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+	if (status < 0)
+		goto error;
+	state->m_HICfgCtrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
+	status = HI_CfgCommand(state);
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static int load_microcode(struct drxk_state *state, const char *mc_name)
+{
+	const struct firmware *fw = NULL;
+	int err = 0;
+
+	dprintk(1, "\n");
+
+	err = request_firmware(&fw, mc_name, state->i2c->dev.parent);
+	if (err < 0) {
+		printk(KERN_ERR
+		       "drxk: Could not load firmware file %s.\n", mc_name);
+		printk(KERN_INFO
+		       "drxk: Copy %s to your hotplug directory!\n", mc_name);
+		return err;
+	}
+	err = DownloadMicrocode(state, fw->data, fw->size);
+	release_firmware(fw);
+	return err;
+}
+
+static int init_drxk(struct drxk_state *state)
+{
+	int status = 0;
+	enum DRXPowerMode powerMode = DRXK_POWER_DOWN_OFDM;
+	u16 driverVersion;
+
+	dprintk(1, "\n");
+	if ((state->m_DrxkState == DRXK_UNINITIALIZED)) {
+		status = PowerUpDevice(state);
+		if (status < 0)
+			goto error;
+		status = DRXX_Open(state);
+		if (status < 0)
+			goto error;
+		/* Soft reset of OFDM-, sys- and osc-clockdomain */
+		status = write16(state, SIO_CC_SOFT_RST__A, SIO_CC_SOFT_RST_OFDM__M | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M);
+		if (status < 0)
+			goto error;
+		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
+		if (status < 0)
+			goto error;
+		/* TODO is this needed, if yes how much delay in worst case scenario */
+		msleep(1);
+		state->m_DRXK_A3_PATCH_CODE = true;
+		status = GetDeviceCapabilities(state);
+		if (status < 0)
+			goto error;
+
+		/* Bridge delay, uses oscilator clock */
+		/* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */
+		/* SDA brdige delay */
+		state->m_HICfgBridgeDelay =
+			(u16) ((state->m_oscClockFreq / 1000) *
+				HI_I2C_BRIDGE_DELAY) / 1000;
+		/* Clipping */
+		if (state->m_HICfgBridgeDelay >
+			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) {
+			state->m_HICfgBridgeDelay =
+				SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M;
+		}
+		/* SCL bridge delay, same as SDA for now */
+		state->m_HICfgBridgeDelay +=
+			state->m_HICfgBridgeDelay <<
+			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B;
+
+		status = InitHI(state);
+		if (status < 0)
+			goto error;
+		/* disable various processes */
+#if NOA1ROM
+		if (!(state->m_DRXK_A1_ROM_CODE)
+			&& !(state->m_DRXK_A2_ROM_CODE))
+#endif
+		{
+			status = write16(state, SCU_RAM_GPIO__A, SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
+			if (status < 0)
+				goto error;
+		}
+
+		/* disable MPEG port */
+		status = MPEGTSDisable(state);
+		if (status < 0)
+			goto error;
+
+		/* Stop AUD and SCU */
+		status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+
+		/* enable token-ring bus through OFDM block for possible ucode upload */
+		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_ON);
+		if (status < 0)
+			goto error;
+
+		/* include boot loader section */
+		status = write16(state, SIO_BL_COMM_EXEC__A, SIO_BL_COMM_EXEC_ACTIVE);
+		if (status < 0)
+			goto error;
+		status = BLChainCmd(state, 0, 6, 100);
+		if (status < 0)
+			goto error;
+
+		if (!state->microcode_name)
+			load_microcode(state, "drxk_a3.mc");
+		else
+			load_microcode(state, state->microcode_name);
+
+		/* disable token-ring bus through OFDM block for possible ucode upload */
+		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, SIO_OFDM_SH_OFDM_RING_ENABLE_OFF);
+		if (status < 0)
+			goto error;
+
+		/* Run SCU for a little while to initialize microcode version numbers */
+		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
+		if (status < 0)
+			goto error;
+		status = DRXX_Open(state);
+		if (status < 0)
+			goto error;
+		/* added for test */
+		msleep(30);
+
+		powerMode = DRXK_POWER_DOWN_OFDM;
+		status = CtrlPowerMode(state, &powerMode);
+		if (status < 0)
+			goto error;
+
+		/* Stamp driver version number in SCU data RAM in BCD code
+			Done to enable field application engineers to retreive drxdriver version
+			via I2C from SCU RAM.
+			Not using SCU command interface for SCU register access since no
+			microcode may be present.
+			*/
+		driverVersion =
+			(((DRXK_VERSION_MAJOR / 100) % 10) << 12) +
+			(((DRXK_VERSION_MAJOR / 10) % 10) << 8) +
+			((DRXK_VERSION_MAJOR % 10) << 4) +
+			(DRXK_VERSION_MINOR % 10);
+		status = write16(state, SCU_RAM_DRIVER_VER_HI__A, driverVersion);
+		if (status < 0)
+			goto error;
+		driverVersion =
+			(((DRXK_VERSION_PATCH / 1000) % 10) << 12) +
+			(((DRXK_VERSION_PATCH / 100) % 10) << 8) +
+			(((DRXK_VERSION_PATCH / 10) % 10) << 4) +
+			(DRXK_VERSION_PATCH % 10);
+		status = write16(state, SCU_RAM_DRIVER_VER_LO__A, driverVersion);
+		if (status < 0)
+			goto error;
+
+		printk(KERN_INFO "DRXK driver version %d.%d.%d\n",
+			DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR,
+			DRXK_VERSION_PATCH);
+
+		/* Dirty fix of default values for ROM/PATCH microcode
+			Dirty because this fix makes it impossible to setup suitable values
+			before calling DRX_Open. This solution requires changes to RF AGC speed
+			to be done via the CTRL function after calling DRX_Open */
+
+		/* m_dvbtRfAgcCfg.speed = 3; */
+
+		/* Reset driver debug flags to 0 */
+		status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0);
+		if (status < 0)
+			goto error;
+		/* driver 0.9.0 */
+		/* Setup FEC OC:
+			NOTE: No more full FEC resets allowed afterwards!! */
+		status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP);
+		if (status < 0)
+			goto error;
+		/* MPEGTS functions are still the same */
+		status = MPEGTSDtoInit(state);
+		if (status < 0)
+			goto error;
+		status = MPEGTSStop(state);
+		if (status < 0)
+			goto error;
+		status = MPEGTSConfigurePolarity(state);
+		if (status < 0)
+			goto error;
+		status = MPEGTSConfigurePins(state, state->m_enableMPEGOutput);
+		if (status < 0)
+			goto error;
+		/* added: configure GPIO */
+		status = WriteGPIO(state);
+		if (status < 0)
+			goto error;
+
+		state->m_DrxkState = DRXK_STOPPED;
+
+		if (state->m_bPowerDown) {
+			status = PowerDownDevice(state);
+			if (status < 0)
+				goto error;
+			state->m_DrxkState = DRXK_POWERED_DOWN;
+		} else
+			state->m_DrxkState = DRXK_STOPPED;
+	}
+error:
+	if (status < 0)
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+
+	return status;
+}
+
+static void drxk_c_release(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	kfree(state);
+}
+
+static int drxk_c_init(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	if (mutex_trylock(&state->ctlock) == 0)
+		return -EBUSY;
+	SetOperationMode(state, OM_QAM_ITU_A);
+	return 0;
+}
+
+static int drxk_c_sleep(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	ShutDown(state);
+	mutex_unlock(&state->ctlock);
+	return 0;
+}
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "%s\n", enable ? "enable" : "disable");
+	return ConfigureI2CBridge(state, enable ? true : false);
+}
+
+static int drxk_set_parameters(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *p)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u32 IF;
+
+	dprintk(1, "\n");
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, p);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+	state->param = *p;
+	fe->ops.tuner_ops.get_frequency(fe, &IF);
+	Start(state, 0, IF);
+
+	/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
+
+	return 0;
+}
+
+static int drxk_c_get_frontend(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *p)
+{
+	dprintk(1, "\n");
+	return 0;
+}
+
+static int drxk_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u32 stat;
+
+	dprintk(1, "\n");
+	*status = 0;
+	GetLockStatus(state, &stat, 0);
+	if (stat == MPEG_LOCK)
+		*status |= 0x1f;
+	if (stat == FEC_LOCK)
+		*status |= 0x0f;
+	if (stat == DEMOD_LOCK)
+		*status |= 0x07;
+	return 0;
+}
+
+static int drxk_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	dprintk(1, "\n");
+
+	*ber = 0;
+	return 0;
+}
+
+static int drxk_read_signal_strength(struct dvb_frontend *fe,
+				     u16 *strength)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u32 val = 0;
+
+	dprintk(1, "\n");
+	ReadIFAgc(state, &val);
+	*strength = val & 0xffff;
+	return 0;
+}
+
+static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	s32 snr2;
+
+	dprintk(1, "\n");
+	GetSignalToNoise(state, &snr2);
+	*snr = snr2 & 0xffff;
+	return 0;
+}
+
+static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+	u16 err;
+
+	dprintk(1, "\n");
+	DVBTQAMGetAccPktErr(state, &err);
+	*ucblocks = (u32) err;
+	return 0;
+}
+
+static int drxk_c_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings
+				    *sets)
+{
+	dprintk(1, "\n");
+	sets->min_delay_ms = 3000;
+	sets->max_drift = 0;
+	sets->step_size = 0;
+	return 0;
+}
+
+static void drxk_t_release(struct dvb_frontend *fe)
+{
+	/*
+	 * There's nothing to release here, as the state struct
+	 * is already freed by drxk_c_release.
+	 */
+}
+
+static int drxk_t_init(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	if (mutex_trylock(&state->ctlock) == 0)
+		return -EBUSY;
+	SetOperationMode(state, OM_DVBT);
+	return 0;
+}
+
+static int drxk_t_sleep(struct dvb_frontend *fe)
+{
+	struct drxk_state *state = fe->demodulator_priv;
+
+	dprintk(1, "\n");
+	mutex_unlock(&state->ctlock);
+	return 0;
+}
+
+static int drxk_t_get_frontend(struct dvb_frontend *fe,
+			       struct dvb_frontend_parameters *p)
+{
+	dprintk(1, "\n");
+
+	return 0;
+}
+
+static struct dvb_frontend_ops drxk_c_ops = {
+	.info = {
+		 .name = "DRXK DVB-C",
+		 .type = FE_QAM,
+		 .frequency_stepsize = 62500,
+		 .frequency_min = 47000000,
+		 .frequency_max = 862000000,
+		 .symbol_rate_min = 870000,
+		 .symbol_rate_max = 11700000,
+		 .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
+		 FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO},
+	.release = drxk_c_release,
+	.init = drxk_c_init,
+	.sleep = drxk_c_sleep,
+	.i2c_gate_ctrl = drxk_gate_ctrl,
+
+	.set_frontend = drxk_set_parameters,
+	.get_frontend = drxk_c_get_frontend,
+	.get_tune_settings = drxk_c_get_tune_settings,
+
+	.read_status = drxk_read_status,
+	.read_ber = drxk_read_ber,
+	.read_signal_strength = drxk_read_signal_strength,
+	.read_snr = drxk_read_snr,
+	.read_ucblocks = drxk_read_ucblocks,
+};
+
+static struct dvb_frontend_ops drxk_t_ops = {
+	.info = {
+		 .name = "DRXK DVB-T",
+		 .type = FE_OFDM,
+		 .frequency_min = 47125000,
+		 .frequency_max = 865000000,
+		 .frequency_stepsize = 166667,
+		 .frequency_tolerance = 0,
+		 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+		 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
+		 FE_CAN_FEC_AUTO |
+		 FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+		 FE_CAN_QAM_AUTO |
+		 FE_CAN_TRANSMISSION_MODE_AUTO |
+		 FE_CAN_GUARD_INTERVAL_AUTO |
+		 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | FE_CAN_MUTE_TS},
+	.release = drxk_t_release,
+	.init = drxk_t_init,
+	.sleep = drxk_t_sleep,
+	.i2c_gate_ctrl = drxk_gate_ctrl,
+
+	.set_frontend = drxk_set_parameters,
+	.get_frontend = drxk_t_get_frontend,
+
+	.read_status = drxk_read_status,
+	.read_ber = drxk_read_ber,
+	.read_signal_strength = drxk_read_signal_strength,
+	.read_snr = drxk_read_snr,
+	.read_ucblocks = drxk_read_ucblocks,
+};
+
+struct dvb_frontend *drxk_attach(const struct drxk_config *config,
+				 struct i2c_adapter *i2c,
+				 struct dvb_frontend **fe_t)
+{
+	struct drxk_state *state = NULL;
+	u8 adr = config->adr;
+
+	dprintk(1, "\n");
+	state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	state->i2c = i2c;
+	state->demod_address = adr;
+	state->single_master = config->single_master;
+	state->microcode_name = config->microcode_name;
+	state->no_i2c_bridge = config->no_i2c_bridge;
+	state->antenna_gpio = config->antenna_gpio;
+	state->antenna_dvbt = config->antenna_dvbt;
+
+	/* NOTE: as more UIO bits will be used, add them to the mask */
+	state->UIO_mask = config->antenna_gpio;
+
+	/* Default gpio to DVB-C */
+	if (!state->antenna_dvbt && state->antenna_gpio)
+		state->m_GPIO |= state->antenna_gpio;
+	else
+		state->m_GPIO &= ~state->antenna_gpio;
+
+	mutex_init(&state->mutex);
+	mutex_init(&state->ctlock);
+
+	memcpy(&state->c_frontend.ops, &drxk_c_ops,
+	       sizeof(struct dvb_frontend_ops));
+	memcpy(&state->t_frontend.ops, &drxk_t_ops,
+	       sizeof(struct dvb_frontend_ops));
+	state->c_frontend.demodulator_priv = state;
+	state->t_frontend.demodulator_priv = state;
+
+	init_state(state);
+	if (init_drxk(state) < 0)
+		goto error;
+	*fe_t = &state->t_frontend;
+
+	return &state->c_frontend;
+
+error:
+	printk(KERN_ERR "drxk: not found\n");
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(drxk_attach);
+
+MODULE_DESCRIPTION("DRX-K driver");
+MODULE_AUTHOR("Ralph Metzler");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/drxk_hard.h b/drivers/media/dvb/frontends/drxk_hard.h
new file mode 100644
index 00000000000..a05c32eecdc
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk_hard.h
@@ -0,0 +1,348 @@
+#include "drxk_map.h"
+
+#define DRXK_VERSION_MAJOR 0
+#define DRXK_VERSION_MINOR 9
+#define DRXK_VERSION_PATCH 4300
+
+#define HI_I2C_DELAY        42
+#define HI_I2C_BRIDGE_DELAY 350
+#define DRXK_MAX_RETRIES    100
+
+#define DRIVER_4400 1
+
+#define DRXX_JTAGID   0x039210D9
+#define DRXX_J_JTAGID 0x239310D9
+#define DRXX_K_JTAGID 0x039210D9
+
+#define DRX_UNKNOWN     254
+#define DRX_AUTO        255
+
+#define DRX_SCU_READY   0
+#define DRXK_MAX_WAITTIME (200)
+#define SCU_RESULT_OK      0
+#define SCU_RESULT_SIZE   -4
+#define SCU_RESULT_INVPAR -3
+#define SCU_RESULT_UNKSTD -2
+#define SCU_RESULT_UNKCMD -1
+
+#ifndef DRXK_OFDM_TR_SHUTDOWN_TIMEOUT
+#define DRXK_OFDM_TR_SHUTDOWN_TIMEOUT (200)
+#endif
+
+#define DRXK_8VSB_MPEG_BIT_RATE     19392658UL  /*bps*/
+#define DRXK_DVBT_MPEG_BIT_RATE     32000000UL  /*bps*/
+#define DRXK_QAM16_MPEG_BIT_RATE    27000000UL  /*bps*/
+#define DRXK_QAM32_MPEG_BIT_RATE    33000000UL  /*bps*/
+#define DRXK_QAM64_MPEG_BIT_RATE    40000000UL  /*bps*/
+#define DRXK_QAM128_MPEG_BIT_RATE   46000000UL  /*bps*/
+#define DRXK_QAM256_MPEG_BIT_RATE   52000000UL  /*bps*/
+#define DRXK_MAX_MPEG_BIT_RATE      52000000UL  /*bps*/
+
+#define   IQM_CF_OUT_ENA_OFDM__M                                            0x4
+#define     IQM_FS_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_FS_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_FS_ADJ_SEL_B_VSB                                            0x2
+#define     IQM_RC_ADJ_SEL_B_OFF                                            0x0
+#define     IQM_RC_ADJ_SEL_B_QAM                                            0x1
+#define     IQM_RC_ADJ_SEL_B_VSB                                            0x2
+
+enum OperationMode {
+	OM_NONE,
+	OM_QAM_ITU_A,
+	OM_QAM_ITU_B,
+	OM_QAM_ITU_C,
+	OM_DVBT
+};
+
+enum DRXPowerMode {
+	DRX_POWER_UP = 0,
+	DRX_POWER_MODE_1,
+	DRX_POWER_MODE_2,
+	DRX_POWER_MODE_3,
+	DRX_POWER_MODE_4,
+	DRX_POWER_MODE_5,
+	DRX_POWER_MODE_6,
+	DRX_POWER_MODE_7,
+	DRX_POWER_MODE_8,
+
+	DRX_POWER_MODE_9,
+	DRX_POWER_MODE_10,
+	DRX_POWER_MODE_11,
+	DRX_POWER_MODE_12,
+	DRX_POWER_MODE_13,
+	DRX_POWER_MODE_14,
+	DRX_POWER_MODE_15,
+	DRX_POWER_MODE_16,
+	DRX_POWER_DOWN = 255
+};
+
+
+/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */
+#ifndef DRXK_POWER_DOWN_OFDM
+#define DRXK_POWER_DOWN_OFDM        DRX_POWER_MODE_1
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down core (sysclk) */
+#ifndef DRXK_POWER_DOWN_CORE
+#define DRXK_POWER_DOWN_CORE        DRX_POWER_MODE_9
+#endif
+
+/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */
+#ifndef DRXK_POWER_DOWN_PLL
+#define DRXK_POWER_DOWN_PLL         DRX_POWER_MODE_10
+#endif
+
+
+enum AGC_CTRL_MODE { DRXK_AGC_CTRL_AUTO = 0, DRXK_AGC_CTRL_USER, DRXK_AGC_CTRL_OFF };
+enum EDrxkState { DRXK_UNINITIALIZED = 0, DRXK_STOPPED, DRXK_DTV_STARTED, DRXK_ATV_STARTED, DRXK_POWERED_DOWN };
+enum EDrxkCoefArrayIndex {
+	DRXK_COEF_IDX_MN = 0,
+	DRXK_COEF_IDX_FM    ,
+	DRXK_COEF_IDX_L     ,
+	DRXK_COEF_IDX_LP    ,
+	DRXK_COEF_IDX_BG    ,
+	DRXK_COEF_IDX_DK    ,
+	DRXK_COEF_IDX_I     ,
+	DRXK_COEF_IDX_MAX
+};
+enum EDrxkSifAttenuation {
+	DRXK_SIF_ATTENUATION_0DB,
+	DRXK_SIF_ATTENUATION_3DB,
+	DRXK_SIF_ATTENUATION_6DB,
+	DRXK_SIF_ATTENUATION_9DB
+};
+enum EDrxkConstellation {
+	DRX_CONSTELLATION_BPSK = 0,
+	DRX_CONSTELLATION_QPSK,
+	DRX_CONSTELLATION_PSK8,
+	DRX_CONSTELLATION_QAM16,
+	DRX_CONSTELLATION_QAM32,
+	DRX_CONSTELLATION_QAM64,
+	DRX_CONSTELLATION_QAM128,
+	DRX_CONSTELLATION_QAM256,
+	DRX_CONSTELLATION_QAM512,
+	DRX_CONSTELLATION_QAM1024,
+	DRX_CONSTELLATION_UNKNOWN = DRX_UNKNOWN,
+	DRX_CONSTELLATION_AUTO    = DRX_AUTO
+};
+enum EDrxkInterleaveMode {
+	DRXK_QAM_I12_J17    = 16,
+	DRXK_QAM_I_UNKNOWN  = DRX_UNKNOWN
+};
+enum {
+	DRXK_SPIN_A1 = 0,
+	DRXK_SPIN_A2,
+	DRXK_SPIN_A3,
+	DRXK_SPIN_UNKNOWN
+};
+
+enum DRXKCfgDvbtSqiSpeed {
+	DRXK_DVBT_SQI_SPEED_FAST = 0,
+	DRXK_DVBT_SQI_SPEED_MEDIUM,
+	DRXK_DVBT_SQI_SPEED_SLOW,
+	DRXK_DVBT_SQI_SPEED_UNKNOWN = DRX_UNKNOWN
+} ;
+
+enum DRXFftmode_t {
+	DRX_FFTMODE_2K = 0,
+	DRX_FFTMODE_4K,
+	DRX_FFTMODE_8K,
+	DRX_FFTMODE_UNKNOWN = DRX_UNKNOWN,
+	DRX_FFTMODE_AUTO    = DRX_AUTO
+};
+
+enum DRXMPEGStrWidth_t {
+	DRX_MPEG_STR_WIDTH_1,
+	DRX_MPEG_STR_WIDTH_8
+};
+
+enum DRXQamLockRange_t {
+	DRX_QAM_LOCKRANGE_NORMAL,
+	DRX_QAM_LOCKRANGE_EXTENDED
+};
+
+struct DRXKCfgDvbtEchoThres_t {
+	u16             threshold;
+	enum DRXFftmode_t      fftMode;
+} ;
+
+struct SCfgAgc {
+	enum AGC_CTRL_MODE     ctrlMode;        /* off, user, auto */
+	u16            outputLevel;     /* range dependent on AGC */
+	u16            minOutputLevel;  /* range dependent on AGC */
+	u16            maxOutputLevel;  /* range dependent on AGC */
+	u16            speed;           /* range dependent on AGC */
+	u16            top;             /* rf-agc take over point */
+	u16            cutOffCurrent;   /* rf-agc is accelerated if output current
+					   is below cut-off current */
+	u16            IngainTgtMax;
+	u16            FastClipCtrlDelay;
+};
+
+struct SCfgPreSaw {
+	u16        reference; /* pre SAW reference value, range 0 .. 31 */
+	bool          usePreSaw; /* TRUE algorithms must use pre SAW sense */
+};
+
+struct DRXKOfdmScCmd_t {
+	u16 cmd;        /**< Command number */
+	u16 subcmd;     /**< Sub-command parameter*/
+	u16 param0;     /**< General purpous param */
+	u16 param1;     /**< General purpous param */
+	u16 param2;     /**< General purpous param */
+	u16 param3;     /**< General purpous param */
+	u16 param4;     /**< General purpous param */
+};
+
+struct drxk_state {
+	struct dvb_frontend c_frontend;
+	struct dvb_frontend t_frontend;
+	struct dvb_frontend_parameters param;
+	struct device *dev;
+
+	struct i2c_adapter *i2c;
+	u8     demod_address;
+	void  *priv;
+
+	struct mutex mutex;
+	struct mutex ctlock;
+
+	u32    m_Instance;           /**< Channel 1,2,3 or 4 */
+
+	int    m_ChunkSize;
+	u8 Chunk[256];
+
+	bool   m_hasLNA;
+	bool   m_hasDVBT;
+	bool   m_hasDVBC;
+	bool   m_hasAudio;
+	bool   m_hasATV;
+	bool   m_hasOOB;
+	bool   m_hasSAWSW;         /**< TRUE if mat_tx is available */
+	bool   m_hasGPIO1;         /**< TRUE if mat_rx is available */
+	bool   m_hasGPIO2;         /**< TRUE if GPIO is available */
+	bool   m_hasIRQN;          /**< TRUE if IRQN is available */
+	u16    m_oscClockFreq;
+	u16    m_HICfgTimingDiv;
+	u16    m_HICfgBridgeDelay;
+	u16    m_HICfgWakeUpKey;
+	u16    m_HICfgTimeout;
+	u16    m_HICfgCtrl;
+	s32    m_sysClockFreq;      /**< system clock frequency in kHz */
+
+	enum EDrxkState    m_DrxkState;      /**< State of Drxk (init,stopped,started) */
+	enum OperationMode m_OperationMode;  /**< digital standards */
+	struct SCfgAgc     m_vsbRfAgcCfg;    /**< settings for VSB RF-AGC */
+	struct SCfgAgc     m_vsbIfAgcCfg;    /**< settings for VSB IF-AGC */
+	u16                m_vsbPgaCfg;      /**< settings for VSB PGA */
+	struct SCfgPreSaw  m_vsbPreSawCfg;   /**< settings for pre SAW sense */
+	s32    m_Quality83percent;  /**< MER level (*0.1 dB) for 83% quality indication */
+	s32    m_Quality93percent;  /**< MER level (*0.1 dB) for 93% quality indication */
+	bool   m_smartAntInverted;
+	bool   m_bDebugEnableBridge;
+	bool   m_bPDownOpenBridge;  /**< only open DRXK bridge before power-down once it has been accessed */
+	bool   m_bPowerDown;        /**< Power down when not used */
+
+	u32    m_IqmFsRateOfs;      /**< frequency shift as written to DRXK register (28bit fixpoint) */
+
+	bool   m_enableMPEGOutput;  /**< If TRUE, enable MPEG output */
+	bool   m_insertRSByte;      /**< If TRUE, insert RS byte */
+	bool   m_enableParallel;    /**< If TRUE, parallel out otherwise serial */
+	bool   m_invertDATA;        /**< If TRUE, invert DATA signals */
+	bool   m_invertERR;         /**< If TRUE, invert ERR signal */
+	bool   m_invertSTR;         /**< If TRUE, invert STR signals */
+	bool   m_invertVAL;         /**< If TRUE, invert VAL signals */
+	bool   m_invertCLK;         /**< If TRUE, invert CLK signals */
+	bool   m_DVBCStaticCLK;
+	bool   m_DVBTStaticCLK;     /**< If TRUE, static MPEG clockrate will
+					 be used, otherwise clockrate will
+					 adapt to the bitrate of the TS */
+	u32    m_DVBTBitrate;
+	u32    m_DVBCBitrate;
+
+	u8     m_TSDataStrength;
+	u8     m_TSClockkStrength;
+
+	enum DRXMPEGStrWidth_t  m_widthSTR;    /**< MPEG start width */
+	u32    m_mpegTsStaticBitrate;          /**< Maximum bitrate in b/s in case
+						    static clockrate is selected */
+
+	/* LARGE_INTEGER   m_StartTime; */     /**< Contains the time of the last demod start */
+	s32    m_MpegLockTimeOut;      /**< WaitForLockStatus Timeout (counts from start time) */
+	s32    m_DemodLockTimeOut;     /**< WaitForLockStatus Timeout (counts from start time) */
+
+	bool   m_disableTEIhandling;
+
+	bool   m_RfAgcPol;
+	bool   m_IfAgcPol;
+
+	struct SCfgAgc    m_atvRfAgcCfg;  /**< settings for ATV RF-AGC */
+	struct SCfgAgc    m_atvIfAgcCfg;  /**< settings for ATV IF-AGC */
+	struct SCfgPreSaw m_atvPreSawCfg; /**< settings for ATV pre SAW sense */
+	bool              m_phaseCorrectionBypass;
+	s16               m_atvTopVidPeak;
+	u16               m_atvTopNoiseTh;
+	enum EDrxkSifAttenuation m_sifAttenuation;
+	bool              m_enableCVBSOutput;
+	bool              m_enableSIFOutput;
+	bool              m_bMirrorFreqSpect;
+	enum EDrxkConstellation  m_Constellation; /**< Constellation type of the channel */
+	u32               m_CurrSymbolRate;       /**< Current QAM symbol rate */
+	struct SCfgAgc    m_qamRfAgcCfg;          /**< settings for QAM RF-AGC */
+	struct SCfgAgc    m_qamIfAgcCfg;          /**< settings for QAM IF-AGC */
+	u16               m_qamPgaCfg;            /**< settings for QAM PGA */
+	struct SCfgPreSaw m_qamPreSawCfg;         /**< settings for QAM pre SAW sense */
+	enum EDrxkInterleaveMode m_qamInterleaveMode; /**< QAM Interleave mode */
+	u16               m_fecRsPlen;
+	u16               m_fecRsPrescale;
+
+	enum DRXKCfgDvbtSqiSpeed m_sqiSpeed;
+
+	u16               m_GPIO;
+	u16               m_GPIOCfg;
+
+	struct SCfgAgc    m_dvbtRfAgcCfg;     /**< settings for QAM RF-AGC */
+	struct SCfgAgc    m_dvbtIfAgcCfg;     /**< settings for QAM IF-AGC */
+	struct SCfgPreSaw m_dvbtPreSawCfg;    /**< settings for QAM pre SAW sense */
+
+	u16               m_agcFastClipCtrlDelay;
+	bool              m_adcCompPassed;
+	u16               m_adcCompCoef[64];
+	u16               m_adcState;
+
+	u8               *m_microcode;
+	int               m_microcode_length;
+	bool              m_DRXK_A1_PATCH_CODE;
+	bool              m_DRXK_A1_ROM_CODE;
+	bool              m_DRXK_A2_ROM_CODE;
+	bool              m_DRXK_A3_ROM_CODE;
+	bool              m_DRXK_A2_PATCH_CODE;
+	bool              m_DRXK_A3_PATCH_CODE;
+
+	bool              m_rfmirror;
+	u8                m_deviceSpin;
+	u32               m_iqmRcRate;
+
+	enum DRXPowerMode m_currentPowerMode;
+
+	/*
+	 * Configurable parameters at the driver. They stores the values found
+	 * at struct drxk_config.
+	 */
+
+	u16	UIO_mask;	/* Bits used by UIO */
+
+	bool	single_master;
+	bool	no_i2c_bridge;
+	bool	antenna_dvbt;
+	u16	antenna_gpio;
+
+	const char *microcode_name;
+};
+
+#define NEVER_LOCK 0
+#define NOT_LOCKED 1
+#define DEMOD_LOCK 2
+#define FEC_LOCK   3
+#define MPEG_LOCK  4
+
diff --git a/drivers/media/dvb/frontends/drxk_map.h b/drivers/media/dvb/frontends/drxk_map.h
new file mode 100644
index 00000000000..9b11a832886
--- /dev/null
+++ b/drivers/media/dvb/frontends/drxk_map.h
@@ -0,0 +1,449 @@
+#define  AUD_COMM_EXEC__A                                                  0x1000000
+#define    AUD_COMM_EXEC_STOP                                              0x0
+#define  FEC_COMM_EXEC__A                                                  0x1C00000
+#define    FEC_COMM_EXEC_STOP                                              0x0
+#define    FEC_COMM_EXEC_ACTIVE                                            0x1
+#define  FEC_DI_COMM_EXEC__A                                               0x1C20000
+#define    FEC_DI_COMM_EXEC_STOP                                           0x0
+#define  FEC_DI_INPUT_CTL__A                                               0x1C20016
+#define  FEC_RS_COMM_EXEC__A                                               0x1C30000
+#define    FEC_RS_COMM_EXEC_STOP                                           0x0
+#define  FEC_RS_MEASUREMENT_PERIOD__A                                      0x1C30012
+#define  FEC_RS_MEASUREMENT_PRESCALE__A                                    0x1C30013
+#define  FEC_OC_MODE__A                                                    0x1C40011
+#define    FEC_OC_MODE_PARITY__M                                           0x1
+#define  FEC_OC_DTO_MODE__A                                                0x1C40014
+#define    FEC_OC_DTO_MODE_DYNAMIC__M                                      0x1
+#define    FEC_OC_DTO_MODE_OFFSET_ENABLE__M                                0x4
+#define  FEC_OC_DTO_PERIOD__A                                              0x1C40015
+#define  FEC_OC_DTO_BURST_LEN__A                                           0x1C40018
+#define  FEC_OC_FCT_MODE__A                                                0x1C4001A
+#define  FEC_OC_FCT_MODE__PRE                                              0x0
+#define    FEC_OC_FCT_MODE_RAT_ENA__M                                      0x1
+#define    FEC_OC_FCT_MODE_VIRT_ENA__M                                     0x2
+#define  FEC_OC_TMD_MODE__A                                                0x1C4001E
+#define  FEC_OC_TMD_COUNT__A                                               0x1C4001F
+#define  FEC_OC_TMD_HI_MARGIN__A                                           0x1C40020
+#define  FEC_OC_TMD_LO_MARGIN__A                                           0x1C40021
+#define  FEC_OC_TMD_INT_UPD_RATE__A                                        0x1C40023
+#define  FEC_OC_AVR_PARM_A__A                                              0x1C40026
+#define  FEC_OC_AVR_PARM_B__A                                              0x1C40027
+#define  FEC_OC_RCN_GAIN__A                                                0x1C4002E
+#define  FEC_OC_RCN_CTL_RATE_LO__A                                         0x1C40030
+#define  FEC_OC_RCN_CTL_STEP_LO__A                                         0x1C40032
+#define  FEC_OC_RCN_CTL_STEP_HI__A                                         0x1C40033
+#define  FEC_OC_SNC_MODE__A                                                0x1C40040
+#define    FEC_OC_SNC_MODE_SHUTDOWN__M                                     0x10
+#define  FEC_OC_SNC_LWM__A                                                 0x1C40041
+#define  FEC_OC_SNC_HWM__A                                                 0x1C40042
+#define  FEC_OC_SNC_UNLOCK__A                                              0x1C40043
+#define  FEC_OC_SNC_FAIL_PERIOD__A                                         0x1C40046
+#define  FEC_OC_IPR_MODE__A                                                0x1C40048
+#define    FEC_OC_IPR_MODE_SERIAL__M                                       0x1
+#define    FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M                             0x4
+#define    FEC_OC_IPR_MODE_MVAL_DIS_PAR__M                                 0x10
+#define  FEC_OC_IPR_INVERT__A                                              0x1C40049
+#define    FEC_OC_IPR_INVERT_MD0__M                                        0x1
+#define    FEC_OC_IPR_INVERT_MD1__M                                        0x2
+#define    FEC_OC_IPR_INVERT_MD2__M                                        0x4
+#define    FEC_OC_IPR_INVERT_MD3__M                                        0x8
+#define    FEC_OC_IPR_INVERT_MD4__M                                        0x10
+#define    FEC_OC_IPR_INVERT_MD5__M                                        0x20
+#define    FEC_OC_IPR_INVERT_MD6__M                                        0x40
+#define    FEC_OC_IPR_INVERT_MD7__M                                        0x80
+#define    FEC_OC_IPR_INVERT_MERR__M                                       0x100
+#define    FEC_OC_IPR_INVERT_MSTRT__M                                      0x200
+#define    FEC_OC_IPR_INVERT_MVAL__M                                       0x400
+#define    FEC_OC_IPR_INVERT_MCLK__M                                       0x800
+#define  FEC_OC_OCR_INVERT__A                                              0x1C40052
+#define  IQM_COMM_EXEC__A                                                  0x1800000
+#define      IQM_COMM_EXEC_B_STOP                                          0x0
+#define      IQM_COMM_EXEC_B_ACTIVE                                        0x1
+#define  IQM_FS_RATE_OFS_LO__A                                             0x1820010
+#define  IQM_FS_ADJ_SEL__A                                                 0x1820014
+#define      IQM_FS_ADJ_SEL_B_OFF                                          0x0
+#define      IQM_FS_ADJ_SEL_B_QAM                                          0x1
+#define      IQM_FS_ADJ_SEL_B_VSB                                          0x2
+#define  IQM_FD_RATESEL__A                                                 0x1830010
+#define  IQM_RC_RATE_OFS_LO__A                                             0x1840010
+#define  IQM_RC_RATE_OFS_LO__W                                             16
+#define  IQM_RC_RATE_OFS_LO__M                                             0xFFFF
+#define  IQM_RC_RATE_OFS_HI__M                                             0xFF
+#define  IQM_RC_ADJ_SEL__A                                                 0x1840014
+#define      IQM_RC_ADJ_SEL_B_OFF                                          0x0
+#define      IQM_RC_ADJ_SEL_B_QAM                                          0x1
+#define      IQM_RC_ADJ_SEL_B_VSB                                          0x2
+#define  IQM_RC_STRETCH__A                                                 0x1840016
+#define  IQM_CF_COMM_INT_MSK__A                                            0x1860006
+#define  IQM_CF_SYMMETRIC__A                                               0x1860010
+#define  IQM_CF_MIDTAP__A                                                  0x1860011
+#define    IQM_CF_MIDTAP_RE__B                                             0
+#define    IQM_CF_MIDTAP_IM__B                                             1
+#define  IQM_CF_OUT_ENA__A                                                 0x1860012
+#define    IQM_CF_OUT_ENA_QAM__B                                           1
+#define    IQM_CF_OUT_ENA_OFDM__M                                          0x4
+#define  IQM_CF_ADJ_SEL__A                                                 0x1860013
+#define  IQM_CF_SCALE__A                                                   0x1860014
+#define  IQM_CF_SCALE_SH__A                                                0x1860015
+#define  IQM_CF_SCALE_SH__PRE                                              0x0
+#define  IQM_CF_POW_MEAS_LEN__A                                            0x1860017
+#define  IQM_CF_DS_ENA__A                                                  0x1860019
+#define  IQM_CF_TAP_RE0__A                                                 0x1860020
+#define  IQM_CF_TAP_IM0__A                                                 0x1860040
+#define  IQM_CF_CLP_VAL__A                                                 0x1860060
+#define  IQM_CF_DATATH__A                                                  0x1860061
+#define  IQM_CF_PKDTH__A                                                   0x1860062
+#define  IQM_CF_WND_LEN__A                                                 0x1860063
+#define  IQM_CF_DET_LCT__A                                                 0x1860064
+#define  IQM_CF_BYPASSDET__A                                               0x1860067
+#define  IQM_AF_COMM_EXEC__A                                               0x1870000
+#define    IQM_AF_COMM_EXEC_ACTIVE                                         0x1
+#define  IQM_AF_CLKNEG__A                                                  0x1870012
+#define    IQM_AF_CLKNEG_CLKNEGDATA__M                                     0x2
+#define      IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS                     0x0
+#define      IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG                     0x2
+#define  IQM_AF_START_LOCK__A                                              0x187001B
+#define  IQM_AF_PHASE0__A                                                  0x187001C
+#define  IQM_AF_PHASE1__A                                                  0x187001D
+#define  IQM_AF_PHASE2__A                                                  0x187001E
+#define  IQM_AF_CLP_LEN__A                                                 0x1870023
+#define  IQM_AF_CLP_TH__A                                                  0x1870024
+#define  IQM_AF_SNS_LEN__A                                                 0x1870026
+#define  IQM_AF_AGC_IF__A                                                  0x1870028
+#define  IQM_AF_AGC_RF__A                                                  0x1870029
+#define  IQM_AF_PDREF__A                                                   0x187002B
+#define  IQM_AF_PDREF__M                                                   0x1F
+#define  IQM_AF_STDBY__A                                                   0x187002C
+#define      IQM_AF_STDBY_STDBY_ADC_STANDBY                                0x2
+#define      IQM_AF_STDBY_STDBY_AMP_STANDBY                                0x4
+#define      IQM_AF_STDBY_STDBY_PD_STANDBY                                 0x8
+#define      IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY                            0x10
+#define      IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY                            0x20
+#define  IQM_AF_AMUX__A                                                    0x187002D
+#define    IQM_AF_AMUX_SIGNAL2ADC                                          0x1
+#define  IQM_AF_UPD_SEL__A                                                 0x187002F
+#define  IQM_AF_INC_LCT__A                                                 0x1870034
+#define  IQM_AF_INC_BYPASS__A                                              0x1870036
+#define  OFDM_CP_COMM_EXEC__A                                              0x2800000
+#define    OFDM_CP_COMM_EXEC_STOP                                          0x0
+#define  OFDM_EC_SB_PRIOR__A                                               0x3410013
+#define    OFDM_EC_SB_PRIOR_HI                                             0x0
+#define    OFDM_EC_SB_PRIOR_LO                                             0x1
+#define  OFDM_EQ_TOP_TD_TPS_CONST__A                                       0x3010054
+#define  OFDM_EQ_TOP_TD_TPS_CONST__M                                       0x3
+#define    OFDM_EQ_TOP_TD_TPS_CONST_64QAM                                  0x2
+#define  OFDM_EQ_TOP_TD_TPS_CODE_HP__A                                     0x3010056
+#define  OFDM_EQ_TOP_TD_TPS_CODE_HP__M                                     0x7
+#define    OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8                                  0x4
+#define  OFDM_EQ_TOP_TD_SQR_ERR_I__A                                       0x301005E
+#define  OFDM_EQ_TOP_TD_SQR_ERR_Q__A                                       0x301005F
+#define  OFDM_EQ_TOP_TD_SQR_ERR_EXP__A                                     0x3010060
+#define  OFDM_EQ_TOP_TD_REQ_SMB_CNT__A                                     0x3010061
+#define  OFDM_EQ_TOP_TD_TPS_PWR_OFS__A                                     0x3010062
+#define  OFDM_LC_COMM_EXEC__A                                              0x3800000
+#define    OFDM_LC_COMM_EXEC_STOP                                          0x0
+#define  OFDM_SC_COMM_EXEC__A                                              0x3C00000
+#define    OFDM_SC_COMM_EXEC_STOP                                          0x0
+#define  OFDM_SC_COMM_STATE__A                                             0x3C00001
+#define  OFDM_SC_RA_RAM_PARAM0__A                                          0x3C20040
+#define  OFDM_SC_RA_RAM_PARAM1__A                                          0x3C20041
+#define  OFDM_SC_RA_RAM_CMD_ADDR__A                                        0x3C20042
+#define  OFDM_SC_RA_RAM_CMD__A                                             0x3C20043
+#define    OFDM_SC_RA_RAM_CMD_NULL                                         0x0
+#define    OFDM_SC_RA_RAM_CMD_PROC_START                                   0x1
+#define    OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM                               0x3
+#define    OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM                                0x4
+#define    OFDM_SC_RA_RAM_CMD_GET_OP_PARAM                                 0x5
+#define    OFDM_SC_RA_RAM_CMD_USER_IO                                      0x6
+#define    OFDM_SC_RA_RAM_CMD_SET_TIMER                                    0x7
+#define    OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING                              0x8
+#define    OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M                            0x1
+#define    OFDM_SC_RA_RAM_LOCKTRACK_MIN                                    0x1
+#define  OFDM_SC_RA_RAM_OP_PARAM__A                                        0x3C20048
+#define    OFDM_SC_RA_RAM_OP_PARAM_MODE__M                                 0x3
+#define      OFDM_SC_RA_RAM_OP_PARAM_MODE_2K                               0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_MODE_8K                               0x1
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_32                              0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_16                              0x4
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_8                               0x8
+#define      OFDM_SC_RA_RAM_OP_PARAM_GUARD_4                               0xC
+#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK                            0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16                           0x10
+#define      OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64                           0x20
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_NO                               0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A1                               0x40
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A2                               0x80
+#define      OFDM_SC_RA_RAM_OP_PARAM_HIER_A4                               0xC0
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2                              0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3                              0x200
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4                              0x400
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6                              0x600
+#define      OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8                              0x800
+#define      OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI                               0x0
+#define      OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO                               0x1000
+#define    OFDM_SC_RA_RAM_OP_AUTO_MODE__M                                  0x1
+#define    OFDM_SC_RA_RAM_OP_AUTO_GUARD__M                                 0x2
+#define    OFDM_SC_RA_RAM_OP_AUTO_CONST__M                                 0x4
+#define    OFDM_SC_RA_RAM_OP_AUTO_HIER__M                                  0x8
+#define    OFDM_SC_RA_RAM_OP_AUTO_RATE__M                                  0x10
+#define  OFDM_SC_RA_RAM_LOCK__A                                            0x3C2004B
+#define    OFDM_SC_RA_RAM_LOCK_DEMOD__M                                    0x1
+#define    OFDM_SC_RA_RAM_LOCK_FEC__M                                      0x2
+#define    OFDM_SC_RA_RAM_LOCK_MPEG__M                                     0x4
+#define    OFDM_SC_RA_RAM_LOCK_NODVBT__M                                   0x8
+#define  OFDM_SC_RA_RAM_BE_OPT_DELAY__A                                    0x3C2004D
+#define  OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A                               0x3C2004E
+#define  OFDM_SC_RA_RAM_ECHO_THRES__A                                      0x3C2004F
+#define    OFDM_SC_RA_RAM_ECHO_THRES_8K__B                                 0
+#define    OFDM_SC_RA_RAM_ECHO_THRES_8K__M                                 0xFF
+#define    OFDM_SC_RA_RAM_ECHO_THRES_2K__B                                 8
+#define    OFDM_SC_RA_RAM_ECHO_THRES_2K__M                                 0xFF00
+#define  OFDM_SC_RA_RAM_CONFIG__A                                          0x3C20050
+#define    OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M                          0x800
+#define  OFDM_SC_RA_RAM_FR_THRES_8K__A                                     0x3C2007D
+#define  OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A                             0x3C200E0
+#define  OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A                            0x3C200E1
+#define  OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A                             0x3C200E3
+#define  OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A                            0x3C200E4
+#define  OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A                                0x3C200F8
+#define  QAM_COMM_EXEC__A                                                  0x1400000
+#define    QAM_COMM_EXEC_STOP                                              0x0
+#define    QAM_COMM_EXEC_ACTIVE                                            0x1
+#define    QAM_TOP_ANNEX_A                                                 0x0
+#define    QAM_TOP_ANNEX_C                                                 0x2
+#define  QAM_SL_ERR_POWER__A                                               0x1430017
+#define  QAM_DQ_QUAL_FUN0__A                                               0x1440018
+#define  QAM_DQ_QUAL_FUN1__A                                               0x1440019
+#define  QAM_DQ_QUAL_FUN2__A                                               0x144001A
+#define  QAM_DQ_QUAL_FUN3__A                                               0x144001B
+#define  QAM_DQ_QUAL_FUN4__A                                               0x144001C
+#define  QAM_DQ_QUAL_FUN5__A                                               0x144001D
+#define  QAM_LC_MODE__A                                                    0x1450010
+#define  QAM_LC_QUAL_TAB0__A                                               0x1450018
+#define  QAM_LC_QUAL_TAB1__A                                               0x1450019
+#define  QAM_LC_QUAL_TAB2__A                                               0x145001A
+#define  QAM_LC_QUAL_TAB3__A                                               0x145001B
+#define  QAM_LC_QUAL_TAB4__A                                               0x145001C
+#define  QAM_LC_QUAL_TAB5__A                                               0x145001D
+#define  QAM_LC_QUAL_TAB6__A                                               0x145001E
+#define  QAM_LC_QUAL_TAB8__A                                               0x145001F
+#define  QAM_LC_QUAL_TAB9__A                                               0x1450020
+#define  QAM_LC_QUAL_TAB10__A                                              0x1450021
+#define  QAM_LC_QUAL_TAB12__A                                              0x1450022
+#define  QAM_LC_QUAL_TAB15__A                                              0x1450023
+#define  QAM_LC_QUAL_TAB16__A                                              0x1450024
+#define  QAM_LC_QUAL_TAB20__A                                              0x1450025
+#define  QAM_LC_QUAL_TAB25__A                                              0x1450026
+#define  QAM_LC_LPF_FACTORP__A                                             0x1450028
+#define  QAM_LC_LPF_FACTORI__A                                             0x1450029
+#define  QAM_LC_RATE_LIMIT__A                                              0x145002A
+#define  QAM_LC_SYMBOL_FREQ__A                                             0x145002B
+#define  QAM_SY_TIMEOUT__A                                                 0x1470011
+#define  QAM_SY_TIMEOUT__PRE                                               0x3A98
+#define  QAM_SY_SYNC_LWM__A                                                0x1470012
+#define  QAM_SY_SYNC_AWM__A                                                0x1470013
+#define  QAM_SY_SYNC_HWM__A                                                0x1470014
+#define  QAM_SY_SP_INV__A                                                  0x1470017
+#define    QAM_SY_SP_INV_SPECTRUM_INV_DIS                                  0x0
+#define  SCU_COMM_EXEC__A                                                  0x800000
+#define    SCU_COMM_EXEC_STOP                                              0x0
+#define    SCU_COMM_EXEC_ACTIVE                                            0x1
+#define    SCU_COMM_EXEC_HOLD                                              0x2
+#define  SCU_RAM_DRIVER_DEBUG__A                                           0x831EBF
+#define  SCU_RAM_QAM_FSM_STEP_PERIOD__A                                    0x831EC4
+#define  SCU_RAM_GPIO__A                                                   0x831EC7
+#define      SCU_RAM_GPIO_HW_LOCK_IND_DISABLE                              0x0
+#define  SCU_RAM_AGC_CLP_CTRL_MODE__A                                      0x831EC8
+#define  SCU_RAM_FEC_ACCUM_PKT_FAILURES__A                                 0x831ECB
+#define  SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A                               0x831F05
+#define  SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A                                0x831F15
+#define  SCU_RAM_AGC_KI_CYCLEN__A                                          0x831F17
+#define  SCU_RAM_AGC_SNS_CYCLEN__A                                         0x831F18
+#define  SCU_RAM_AGC_RF_SNS_DEV_MAX__A                                     0x831F19
+#define  SCU_RAM_AGC_RF_SNS_DEV_MIN__A                                     0x831F1A
+#define  SCU_RAM_AGC_RF_MAX__A                                             0x831F1B
+#define  SCU_RAM_AGC_CONFIG__A                                             0x831F24
+#define    SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M                            0x1
+#define    SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M                            0x2
+#define    SCU_RAM_AGC_CONFIG_INV_IF_POL__M                                0x100
+#define    SCU_RAM_AGC_CONFIG_INV_RF_POL__M                                0x200
+#define  SCU_RAM_AGC_KI__A                                                 0x831F25
+#define    SCU_RAM_AGC_KI_RF__B                                            4
+#define    SCU_RAM_AGC_KI_RF__M                                            0xF0
+#define    SCU_RAM_AGC_KI_IF__B                                            8
+#define    SCU_RAM_AGC_KI_IF__M                                            0xF00
+#define  SCU_RAM_AGC_KI_RED__A                                             0x831F26
+#define    SCU_RAM_AGC_KI_RED_RAGC_RED__B                                  2
+#define    SCU_RAM_AGC_KI_RED_RAGC_RED__M                                  0xC
+#define    SCU_RAM_AGC_KI_RED_IAGC_RED__B                                  4
+#define    SCU_RAM_AGC_KI_RED_IAGC_RED__M                                  0x30
+#define  SCU_RAM_AGC_KI_INNERGAIN_MIN__A                                   0x831F27
+#define  SCU_RAM_AGC_KI_MINGAIN__A                                         0x831F28
+#define  SCU_RAM_AGC_KI_MAXGAIN__A                                         0x831F29
+#define  SCU_RAM_AGC_KI_MAXMINGAIN_TH__A                                   0x831F2A
+#define  SCU_RAM_AGC_KI_MIN__A                                             0x831F2B
+#define  SCU_RAM_AGC_KI_MAX__A                                             0x831F2C
+#define  SCU_RAM_AGC_CLP_SUM__A                                            0x831F2D
+#define  SCU_RAM_AGC_CLP_SUM_MIN__A                                        0x831F2E
+#define  SCU_RAM_AGC_CLP_SUM_MAX__A                                        0x831F2F
+#define  SCU_RAM_AGC_CLP_CYCLEN__A                                         0x831F30
+#define  SCU_RAM_AGC_CLP_CYCCNT__A                                         0x831F31
+#define  SCU_RAM_AGC_CLP_DIR_TO__A                                         0x831F32
+#define  SCU_RAM_AGC_CLP_DIR_WD__A                                         0x831F33
+#define  SCU_RAM_AGC_CLP_DIR_STP__A                                        0x831F34
+#define  SCU_RAM_AGC_SNS_SUM__A                                            0x831F35
+#define  SCU_RAM_AGC_SNS_SUM_MIN__A                                        0x831F36
+#define  SCU_RAM_AGC_SNS_SUM_MAX__A                                        0x831F37
+#define  SCU_RAM_AGC_SNS_CYCCNT__A                                         0x831F38
+#define  SCU_RAM_AGC_SNS_DIR_TO__A                                         0x831F39
+#define  SCU_RAM_AGC_SNS_DIR_WD__A                                         0x831F3A
+#define  SCU_RAM_AGC_SNS_DIR_STP__A                                        0x831F3B
+#define  SCU_RAM_AGC_INGAIN_TGT__A                                         0x831F3D
+#define  SCU_RAM_AGC_INGAIN_TGT_MIN__A                                     0x831F3E
+#define  SCU_RAM_AGC_INGAIN_TGT_MAX__A                                     0x831F3F
+#define  SCU_RAM_AGC_IF_IACCU_HI__A                                        0x831F40
+#define  SCU_RAM_AGC_IF_IACCU_LO__A                                        0x831F41
+#define  SCU_RAM_AGC_IF_IACCU_HI_TGT__A                                    0x831F42
+#define  SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A                                0x831F43
+#define  SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A                                0x831F44
+#define  SCU_RAM_AGC_RF_IACCU_HI__A                                        0x831F45
+#define  SCU_RAM_AGC_RF_IACCU_LO__A                                        0x831F46
+#define  SCU_RAM_AGC_RF_IACCU_HI_CO__A                                     0x831F47
+#define  SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A                                 0x831F84
+#define  SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A                                0x831F85
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A                                  0x831F86
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A                                  0x831F87
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A                                  0x831F88
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A                                  0x831F89
+#define  SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A                                  0x831F8A
+#define  SCU_RAM_QAM_FSM_RTH__A                                            0x831F8E
+#define  SCU_RAM_QAM_FSM_FTH__A                                            0x831F8F
+#define  SCU_RAM_QAM_FSM_PTH__A                                            0x831F90
+#define  SCU_RAM_QAM_FSM_MTH__A                                            0x831F91
+#define  SCU_RAM_QAM_FSM_CTH__A                                            0x831F92
+#define  SCU_RAM_QAM_FSM_QTH__A                                            0x831F93
+#define  SCU_RAM_QAM_FSM_RATE_LIM__A                                       0x831F94
+#define  SCU_RAM_QAM_FSM_FREQ_LIM__A                                       0x831F95
+#define  SCU_RAM_QAM_FSM_COUNT_LIM__A                                      0x831F96
+#define  SCU_RAM_QAM_LC_CA_COARSE__A                                       0x831F97
+#define  SCU_RAM_QAM_LC_CA_FINE__A                                         0x831F99
+#define  SCU_RAM_QAM_LC_CP_COARSE__A                                       0x831F9A
+#define  SCU_RAM_QAM_LC_CP_MEDIUM__A                                       0x831F9B
+#define  SCU_RAM_QAM_LC_CP_FINE__A                                         0x831F9C
+#define  SCU_RAM_QAM_LC_CI_COARSE__A                                       0x831F9D
+#define  SCU_RAM_QAM_LC_CI_MEDIUM__A                                       0x831F9E
+#define  SCU_RAM_QAM_LC_CI_FINE__A                                         0x831F9F
+#define  SCU_RAM_QAM_LC_EP_COARSE__A                                       0x831FA0
+#define  SCU_RAM_QAM_LC_EP_MEDIUM__A                                       0x831FA1
+#define  SCU_RAM_QAM_LC_EP_FINE__A                                         0x831FA2
+#define  SCU_RAM_QAM_LC_EI_COARSE__A                                       0x831FA3
+#define  SCU_RAM_QAM_LC_EI_MEDIUM__A                                       0x831FA4
+#define  SCU_RAM_QAM_LC_EI_FINE__A                                         0x831FA5
+#define  SCU_RAM_QAM_LC_CF_COARSE__A                                       0x831FA6
+#define  SCU_RAM_QAM_LC_CF_MEDIUM__A                                       0x831FA7
+#define  SCU_RAM_QAM_LC_CF_FINE__A                                         0x831FA8
+#define  SCU_RAM_QAM_LC_CF1_COARSE__A                                      0x831FA9
+#define  SCU_RAM_QAM_LC_CF1_MEDIUM__A                                      0x831FAA
+#define  SCU_RAM_QAM_LC_CF1_FINE__A                                        0x831FAB
+#define  SCU_RAM_QAM_SL_SIG_POWER__A                                       0x831FAC
+#define  SCU_RAM_QAM_EQ_CMA_RAD0__A                                        0x831FAD
+#define  SCU_RAM_QAM_EQ_CMA_RAD1__A                                        0x831FAE
+#define  SCU_RAM_QAM_EQ_CMA_RAD2__A                                        0x831FAF
+#define  SCU_RAM_QAM_EQ_CMA_RAD3__A                                        0x831FB0
+#define  SCU_RAM_QAM_EQ_CMA_RAD4__A                                        0x831FB1
+#define  SCU_RAM_QAM_EQ_CMA_RAD5__A                                        0x831FB2
+#define      SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED                        0x4000
+#define      SCU_RAM_QAM_LOCKED_LOCKED_LOCKED                              0x8000
+#define      SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK                          0xC000
+#define  SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A                                0x831FEA
+#define  SCU_RAM_DRIVER_VER_HI__A                                          0x831FEB
+#define  SCU_RAM_DRIVER_VER_LO__A                                          0x831FEC
+#define  SCU_RAM_PARAM_15__A                                               0x831FED
+#define  SCU_RAM_PARAM_0__A                                                0x831FFC
+#define  SCU_RAM_COMMAND__A                                                0x831FFD
+#define    SCU_RAM_COMMAND_CMD_DEMOD_RESET                                 0x1
+#define    SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV                               0x2
+#define    SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM                             0x3
+#define    SCU_RAM_COMMAND_CMD_DEMOD_START                                 0x4
+#define    SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK                              0x5
+#define    SCU_RAM_COMMAND_CMD_DEMOD_STOP                                  0x9
+#define      SCU_RAM_COMMAND_STANDARD_QAM                                  0x200
+#define      SCU_RAM_COMMAND_STANDARD_OFDM                                 0x400
+#define  SIO_TOP_COMM_KEY__A                                               0x41000F
+#define    SIO_TOP_COMM_KEY_KEY                                            0xFABA
+#define  SIO_TOP_JTAGID_LO__A                                              0x410012
+#define  SIO_HI_RA_RAM_RES__A                                              0x420031
+#define  SIO_HI_RA_RAM_CMD__A                                              0x420032
+#define    SIO_HI_RA_RAM_CMD_RESET                                         0x2
+#define    SIO_HI_RA_RAM_CMD_CONFIG                                        0x3
+#define    SIO_HI_RA_RAM_CMD_BRDCTRL                                       0x7
+#define  SIO_HI_RA_RAM_PAR_1__A                                            0x420033
+#define      SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY                              0x3945
+#define  SIO_HI_RA_RAM_PAR_2__A                                            0x420034
+#define    SIO_HI_RA_RAM_PAR_2_CFG_DIV__M                                  0x7F
+#define      SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN                              0x0
+#define      SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED                            0x4
+#define  SIO_HI_RA_RAM_PAR_3__A                                            0x420035
+#define    SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M                              0x7F
+#define    SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B                              7
+#define      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ                               0x0
+#define      SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE                              0x8
+#define  SIO_HI_RA_RAM_PAR_4__A                                            0x420036
+#define  SIO_HI_RA_RAM_PAR_5__A                                            0x420037
+#define      SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE                            0x1
+#define    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M                                0x8
+#define      SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ                             0x8
+#define  SIO_HI_RA_RAM_PAR_6__A                                            0x420038
+#define  SIO_CC_PLL_LOCK__A                                                0x450012
+#define  SIO_CC_PWD_MODE__A                                                0x450015
+#define      SIO_CC_PWD_MODE_LEVEL_NONE                                    0x0
+#define      SIO_CC_PWD_MODE_LEVEL_OFDM                                    0x1
+#define      SIO_CC_PWD_MODE_LEVEL_CLOCK                                   0x2
+#define      SIO_CC_PWD_MODE_LEVEL_PLL                                     0x3
+#define      SIO_CC_PWD_MODE_LEVEL_OSC                                     0x4
+#define  SIO_CC_SOFT_RST__A                                                0x450016
+#define    SIO_CC_SOFT_RST_OFDM__M                                         0x1
+#define    SIO_CC_SOFT_RST_SYS__M                                          0x2
+#define    SIO_CC_SOFT_RST_OSC__M                                          0x4
+#define  SIO_CC_UPDATE__A                                                  0x450017
+#define    SIO_CC_UPDATE_KEY                                               0xFABA
+#define  SIO_OFDM_SH_OFDM_RING_ENABLE__A                                   0x470010
+#define    SIO_OFDM_SH_OFDM_RING_ENABLE_OFF                                0x0
+#define    SIO_OFDM_SH_OFDM_RING_ENABLE_ON                                 0x1
+#define  SIO_OFDM_SH_OFDM_RING_STATUS__A                                   0x470012
+#define    SIO_OFDM_SH_OFDM_RING_STATUS_DOWN                               0x0
+#define    SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED                            0x1
+#define  SIO_BL_COMM_EXEC__A                                               0x480000
+#define    SIO_BL_COMM_EXEC_ACTIVE                                         0x1
+#define  SIO_BL_STATUS__A                                                  0x480010
+#define  SIO_BL_MODE__A                                                    0x480011
+#define    SIO_BL_MODE_DIRECT                                              0x0
+#define    SIO_BL_MODE_CHAIN                                               0x1
+#define  SIO_BL_ENABLE__A                                                  0x480012
+#define    SIO_BL_ENABLE_ON                                                0x1
+#define  SIO_BL_TGT_HDR__A                                                 0x480014
+#define  SIO_BL_TGT_ADDR__A                                                0x480015
+#define  SIO_BL_SRC_ADDR__A                                                0x480016
+#define  SIO_BL_SRC_LEN__A                                                 0x480017
+#define  SIO_BL_CHAIN_ADDR__A                                              0x480018
+#define  SIO_BL_CHAIN_LEN__A                                               0x480019
+#define  SIO_PDR_MON_CFG__A                                                0x7F0010
+#define  SIO_PDR_UIO_IN_HI__A                                              0x7F0015
+#define  SIO_PDR_UIO_OUT_LO__A                                             0x7F0016
+#define  SIO_PDR_OHW_CFG__A                                                0x7F001F
+#define    SIO_PDR_OHW_CFG_FREF_SEL__M                                     0x3
+#define  SIO_PDR_MSTRT_CFG__A                                              0x7F0025
+#define  SIO_PDR_MERR_CFG__A                                               0x7F0026
+#define  SIO_PDR_MCLK_CFG__A                                               0x7F0028
+#define    SIO_PDR_MCLK_CFG_DRIVE__B                                       3
+#define  SIO_PDR_MVAL_CFG__A                                               0x7F0029
+#define  SIO_PDR_MD0_CFG__A                                                0x7F002A
+#define    SIO_PDR_MD0_CFG_DRIVE__B                                        3
+#define  SIO_PDR_MD1_CFG__A                                                0x7F002B
+#define  SIO_PDR_MD2_CFG__A                                                0x7F002C
+#define  SIO_PDR_MD3_CFG__A                                                0x7F002D
+#define  SIO_PDR_MD4_CFG__A                                                0x7F002F
+#define  SIO_PDR_MD5_CFG__A                                                0x7F0030
+#define  SIO_PDR_MD6_CFG__A                                                0x7F0031
+#define  SIO_PDR_MD7_CFG__A                                                0x7F0032
+#define  SIO_PDR_SMA_TX_CFG__A                                             0x7F0038
diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb/frontends/itd1000.c
index f7a40a18777..aa9ccb821fa 100644
--- a/drivers/media/dvb/frontends/itd1000.c
+++ b/drivers/media/dvb/frontends/itd1000.c
@@ -35,21 +35,18 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
-#define deb(args...)  do { \
+#define itd_dbg(args...)  do { \
 	if (debug) { \
 		printk(KERN_DEBUG   "ITD1000: " args);\
-		printk("\n"); \
 	} \
 } while (0)
 
-#define warn(args...) do { \
+#define itd_warn(args...) do { \
 	printk(KERN_WARNING "ITD1000: " args); \
-	printk("\n"); \
 } while (0)
 
-#define info(args...) do { \
+#define itd_info(args...) do { \
 	printk(KERN_INFO    "ITD1000: " args); \
-	printk("\n"); \
 } while (0)
 
 /* don't write more than one byte with flexcop behind */
@@ -62,7 +59,7 @@ static int itd1000_write_regs(struct itd1000_state *state, u8 reg, u8 v[], u8 le
 	buf[0] = reg;
 	memcpy(&buf[1], v, len);
 
-	/* deb("wr %02x: %02x", reg, v[0]); */
+	/* itd_dbg("wr %02x: %02x\n", reg, v[0]); */
 
 	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
 		printk(KERN_WARNING "itd1000 I2C write failed\n");
@@ -83,7 +80,7 @@ static int itd1000_read_reg(struct itd1000_state *state, u8 reg)
 	itd1000_write_regs(state, (reg - 1) & 0xff, &state->shadow[(reg - 1) & 0xff], 1);
 
 	if (i2c_transfer(state->i2c, msg, 2) != 2) {
-		warn("itd1000 I2C read failed");
+		itd_warn("itd1000 I2C read failed\n");
 		return -EREMOTEIO;
 	}
 	return val;
@@ -127,14 +124,14 @@ static void itd1000_set_lpf_bw(struct itd1000_state *state, u32 symbol_rate)
 	u8 bbgvmin = itd1000_read_reg(state, BBGVMIN) & 0xf0;
 	u8 bw      = itd1000_read_reg(state, BW)      & 0xf0;
 
-	deb("symbol_rate = %d", symbol_rate);
+	itd_dbg("symbol_rate = %d\n", symbol_rate);
 
 	/* not sure what is that ? - starting to download the table */
 	itd1000_write_reg(state, CON1, con1 | (1 << 1));
 
 	for (i = 0; i < ARRAY_SIZE(itd1000_lpf_pga); i++)
 		if (symbol_rate < itd1000_lpf_pga[i].symbol_rate) {
-			deb("symrate: index: %d pgaext: %x, bbgvmin: %x", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin);
+			itd_dbg("symrate: index: %d pgaext: %x, bbgvmin: %x\n", i, itd1000_lpf_pga[i].pgaext, itd1000_lpf_pga[i].bbgvmin);
 			itd1000_write_reg(state, PLLFH,   pllfh | (itd1000_lpf_pga[i].pgaext << 4));
 			itd1000_write_reg(state, BBGVMIN, bbgvmin | (itd1000_lpf_pga[i].bbgvmin));
 			itd1000_write_reg(state, BW,      bw | (i & 0x0f));
@@ -182,7 +179,7 @@ static void itd1000_set_vco(struct itd1000_state *state, u32 freq_khz)
 
 			adcout = itd1000_read_reg(state, PLLLOCK) & 0x0f;
 
-			deb("VCO: %dkHz: %d -> ADCOUT: %d %02x", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c);
+			itd_dbg("VCO: %dkHz: %d -> ADCOUT: %d %02x\n", freq_khz, itd1000_vcorg[i].vcorg, adcout, vco_chp1_i2c);
 
 			if (adcout > 13) {
 				if (!(itd1000_vcorg[i].vcorg == 7 || itd1000_vcorg[i].vcorg == 15))
@@ -232,7 +229,7 @@ static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz)
 	pllf = (u32) tmp;
 
 	state->frequency = ((plln * 1000) + (pllf * 1000)/1048576) * 2*FREF;
-	deb("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d", freq_khz, state->frequency, pllf, plln);
+	itd_dbg("frequency: %dkHz (wanted) %dkHz (set), PLLF = %d, PLLN = %d\n", freq_khz, state->frequency, pllf, plln);
 
 	itd1000_write_reg(state, PLLNH, 0x80); /* PLLNH */;
 	itd1000_write_reg(state, PLLNL, plln & 0xff);
@@ -242,7 +239,7 @@ static void itd1000_set_lo(struct itd1000_state *state, u32 freq_khz)
 
 	for (i = 0; i < ARRAY_SIZE(itd1000_fre_values); i++) {
 		if (freq_khz <= itd1000_fre_values[i].freq) {
-			deb("fre_values: %d", i);
+			itd_dbg("fre_values: %d\n", i);
 			itd1000_write_reg(state, RFTR, itd1000_fre_values[i].values[0]);
 			for (j = 0; j < 9; j++)
 				itd1000_write_reg(state, RFST1+j, itd1000_fre_values[i].values[j+1]);
@@ -382,7 +379,7 @@ struct dvb_frontend *itd1000_attach(struct dvb_frontend *fe, struct i2c_adapter
 		kfree(state);
 		return NULL;
 	}
-	info("successfully identified (ID: %d)", i);
+	itd_info("successfully identified (ID: %d)\n", i);
 
 	memset(state->shadow, 0xff, sizeof(state->shadow));
 	for (i = 0x65; i < 0x9c; i++)
diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index a763ec756f7..6599b8fea9e 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -50,7 +50,7 @@ static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data)
 	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1)
 		dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret);
 
-	return (ret != 1) ? -EFAULT : 0;
+	return (ret != 1) ? -EIO : 0;
 }
 
 static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg)
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 17f8cdf8afe..3879d2e378a 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -634,7 +634,7 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe,
 	struct s5h1420_state* state = fe->demodulator_priv;
 	int frequency_delta;
 	struct dvb_frontend_tune_settings fesettings;
-	uint8_t clock_settting;
+	uint8_t clock_setting;
 
 	dprintk("enter %s\n", __func__);
 
@@ -684,19 +684,19 @@ static int s5h1420_set_frontend(struct dvb_frontend* fe,
 	switch (state->fclk) {
 	default:
 	case 88000000:
-		clock_settting = 80;
+		clock_setting = 80;
 		break;
 	case 86000000:
-		clock_settting = 78;
+		clock_setting = 78;
 		break;
 	case 80000000:
-		clock_settting = 72;
+		clock_setting = 72;
 		break;
 	case 59000000:
-		clock_settting = 51;
+		clock_setting = 51;
 		break;
 	case 44000000:
-		clock_settting = 36;
+		clock_setting = 36;
 		break;
 	}
 	dprintk("pll01: %d, ToneFreq: %d\n", state->fclk/1000000 - 8, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32));
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.c b/drivers/media/dvb/frontends/tda18271c2dd.c
new file mode 100644
index 00000000000..0384e8da4f5
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda18271c2dd.c
@@ -0,0 +1,1251 @@
+/*
+ * tda18271c2dd: Driver for the TDA18271C2 tuner
+ *
+ * Copyright (C) 2010 Digital Devices GmbH
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 only, as published by the Free Software Foundation.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/version.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+
+struct SStandardParam {
+	s32   m_IFFrequency;
+	u32   m_BandWidth;
+	u8    m_EP3_4_0;
+	u8    m_EB22;
+};
+
+struct SMap {
+	u32   m_Frequency;
+	u8    m_Param;
+};
+
+struct SMapI {
+	u32   m_Frequency;
+	s32    m_Param;
+};
+
+struct SMap2 {
+	u32   m_Frequency;
+	u8    m_Param1;
+	u8    m_Param2;
+};
+
+struct SRFBandMap {
+	u32   m_RF_max;
+	u32   m_RF1_Default;
+	u32   m_RF2_Default;
+	u32   m_RF3_Default;
+};
+
+enum ERegister {
+	ID = 0,
+	TM,
+	PL,
+	EP1, EP2, EP3, EP4, EP5,
+	CPD, CD1, CD2, CD3,
+	MPD, MD1, MD2, MD3,
+	EB1, EB2, EB3, EB4, EB5, EB6, EB7, EB8, EB9, EB10,
+	EB11, EB12, EB13, EB14, EB15, EB16, EB17, EB18, EB19, EB20,
+	EB21, EB22, EB23,
+	NUM_REGS
+};
+
+struct tda_state {
+	struct i2c_adapter *i2c;
+	u8 adr;
+
+	u32   m_Frequency;
+	u32   IF;
+
+	u8    m_IFLevelAnalog;
+	u8    m_IFLevelDigital;
+	u8    m_IFLevelDVBC;
+	u8    m_IFLevelDVBT;
+
+	u8    m_EP4;
+	u8    m_EP3_Standby;
+
+	bool  m_bMaster;
+
+	s32   m_SettlingTime;
+
+	u8    m_Regs[NUM_REGS];
+
+	/* Tracking filter settings for band 0..6 */
+	u32   m_RF1[7];
+	s32   m_RF_A1[7];
+	s32   m_RF_B1[7];
+	u32   m_RF2[7];
+	s32   m_RF_A2[7];
+	s32   m_RF_B2[7];
+	u32   m_RF3[7];
+
+	u8    m_TMValue_RFCal;    /* Calibration temperatur */
+
+	bool  m_bFMInput;         /* true to use Pin 8 for FM Radio */
+
+};
+
+static int PowerScan(struct tda_state *state,
+		     u8 RFBand, u32 RF_in,
+		     u32 *pRF_Out, bool *pbcal);
+
+static int i2c_readn(struct i2c_adapter *adapter, u8 adr, u8 *data, int len)
+{
+	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = data, .len   = len} };
+	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_write(struct i2c_adapter *adap, u8 adr, u8 *data, int len)
+{
+	struct i2c_msg msg = {.addr = adr, .flags = 0,
+			      .buf = data, .len = len};
+
+	if (i2c_transfer(adap, &msg, 1) != 1) {
+		printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr);
+		return -1;
+	}
+	return 0;
+}
+
+static int WriteRegs(struct tda_state *state,
+		     u8 SubAddr, u8 *Regs, u16 nRegs)
+{
+	u8 data[nRegs+1];
+
+	data[0] = SubAddr;
+	memcpy(data + 1, Regs, nRegs);
+	return i2c_write(state->i2c, state->adr, data, nRegs+1);
+}
+
+static int WriteReg(struct tda_state *state, u8 SubAddr, u8 Reg)
+{
+	u8 msg[2] = {SubAddr, Reg};
+
+	return i2c_write(state->i2c, state->adr, msg, 2);
+}
+
+static int Read(struct tda_state *state, u8 * Regs)
+{
+	return i2c_readn(state->i2c, state->adr, Regs, 16);
+}
+
+static int ReadExtented(struct tda_state *state, u8 * Regs)
+{
+	return i2c_readn(state->i2c, state->adr, Regs, NUM_REGS);
+}
+
+static int UpdateRegs(struct tda_state *state, u8 RegFrom, u8 RegTo)
+{
+	return WriteRegs(state, RegFrom,
+			 &state->m_Regs[RegFrom], RegTo-RegFrom+1);
+}
+static int UpdateReg(struct tda_state *state, u8 Reg)
+{
+	return WriteReg(state, Reg, state->m_Regs[Reg]);
+}
+
+#include "tda18271c2dd_maps.h"
+
+static void reset(struct tda_state *state)
+{
+	u32   ulIFLevelAnalog = 0;
+	u32   ulIFLevelDigital = 2;
+	u32   ulIFLevelDVBC = 7;
+	u32   ulIFLevelDVBT = 6;
+	u32   ulXTOut = 0;
+	u32   ulStandbyMode = 0x06;    /* Send in stdb, but leave osc on */
+	u32   ulSlave = 0;
+	u32   ulFMInput = 0;
+	u32   ulSettlingTime = 100;
+
+	state->m_Frequency         = 0;
+	state->m_SettlingTime = 100;
+	state->m_IFLevelAnalog = (ulIFLevelAnalog & 0x07) << 2;
+	state->m_IFLevelDigital = (ulIFLevelDigital & 0x07) << 2;
+	state->m_IFLevelDVBC = (ulIFLevelDVBC & 0x07) << 2;
+	state->m_IFLevelDVBT = (ulIFLevelDVBT & 0x07) << 2;
+
+	state->m_EP4 = 0x20;
+	if (ulXTOut != 0)
+		state->m_EP4 |= 0x40;
+
+	state->m_EP3_Standby = ((ulStandbyMode & 0x07) << 5) | 0x0F;
+	state->m_bMaster = (ulSlave == 0);
+
+	state->m_SettlingTime = ulSettlingTime;
+
+	state->m_bFMInput = (ulFMInput == 2);
+}
+
+static bool SearchMap1(struct SMap Map[],
+		       u32 Frequency, u8 *pParam)
+{
+	int i = 0;
+
+	while ((Map[i].m_Frequency != 0) && (Frequency > Map[i].m_Frequency))
+		i += 1;
+	if (Map[i].m_Frequency == 0)
+		return false;
+	*pParam = Map[i].m_Param;
+	return true;
+}
+
+static bool SearchMap2(struct SMapI Map[],
+		       u32 Frequency, s32 *pParam)
+{
+	int i = 0;
+
+	while ((Map[i].m_Frequency != 0) &&
+	       (Frequency > Map[i].m_Frequency))
+		i += 1;
+	if (Map[i].m_Frequency == 0)
+		return false;
+	*pParam = Map[i].m_Param;
+	return true;
+}
+
+static bool SearchMap3(struct SMap2 Map[], u32 Frequency,
+		       u8 *pParam1, u8 *pParam2)
+{
+	int i = 0;
+
+	while ((Map[i].m_Frequency != 0) &&
+	       (Frequency > Map[i].m_Frequency))
+		i += 1;
+	if (Map[i].m_Frequency == 0)
+		return false;
+	*pParam1 = Map[i].m_Param1;
+	*pParam2 = Map[i].m_Param2;
+	return true;
+}
+
+static bool SearchMap4(struct SRFBandMap Map[],
+		       u32 Frequency, u8 *pRFBand)
+{
+	int i = 0;
+
+	while (i < 7 && (Frequency > Map[i].m_RF_max))
+		i += 1;
+	if (i == 7)
+		return false;
+	*pRFBand = i;
+	return true;
+}
+
+static int ThermometerRead(struct tda_state *state, u8 *pTM_Value)
+{
+	int status = 0;
+
+	do {
+		u8 Regs[16];
+		state->m_Regs[TM] |= 0x10;
+		status = UpdateReg(state, TM);
+		if (status < 0)
+			break;
+		status = Read(state, Regs);
+		if (status < 0)
+			break;
+		if (((Regs[TM] & 0x0F) == 0 && (Regs[TM] & 0x20) == 0x20) ||
+		    ((Regs[TM] & 0x0F) == 8 && (Regs[TM] & 0x20) == 0x00)) {
+			state->m_Regs[TM] ^= 0x20;
+			status = UpdateReg(state, TM);
+			if (status < 0)
+				break;
+			msleep(10);
+			status = Read(state, Regs);
+			if (status < 0)
+				break;
+		}
+		*pTM_Value = (Regs[TM] & 0x20)
+				? m_Thermometer_Map_2[Regs[TM] & 0x0F]
+				: m_Thermometer_Map_1[Regs[TM] & 0x0F] ;
+		state->m_Regs[TM] &= ~0x10;        /* Thermometer off */
+		status = UpdateReg(state, TM);
+		if (status < 0)
+			break;
+		state->m_Regs[EP4] &= ~0x03;       /* CAL_mode = 0 ????????? */
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+	} while (0);
+
+	return status;
+}
+
+static int StandBy(struct tda_state *state)
+{
+	int status = 0;
+	do {
+		state->m_Regs[EB12] &= ~0x20;  /* PD_AGC1_Det = 0 */
+		status = UpdateReg(state, EB12);
+		if (status < 0)
+			break;
+		state->m_Regs[EB18] &= ~0x83;  /* AGC1_loop_off = 0, AGC1_Gain = 6 dB */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+		state->m_Regs[EB21] |= 0x03; /* AGC2_Gain = -6 dB */
+		state->m_Regs[EP3] = state->m_EP3_Standby;
+		status = UpdateReg(state, EP3);
+		if (status < 0)
+			break;
+		state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LP_Fc[2] = 0 */
+		status = UpdateRegs(state, EB21, EB23);
+		if (status < 0)
+			break;
+	} while (0);
+	return status;
+}
+
+static int CalcMainPLL(struct tda_state *state, u32 freq)
+{
+
+	u8  PostDiv;
+	u8  Div;
+	u64 OscFreq;
+	u32 MainDiv;
+
+	if (!SearchMap3(m_Main_PLL_Map, freq, &PostDiv, &Div))
+		return -EINVAL;
+
+	OscFreq = (u64) freq * (u64) Div;
+	OscFreq *= (u64) 16384;
+	do_div(OscFreq, (u64)16000000);
+	MainDiv = OscFreq;
+
+	state->m_Regs[MPD] = PostDiv & 0x77;
+	state->m_Regs[MD1] = ((MainDiv >> 16) & 0x7F);
+	state->m_Regs[MD2] = ((MainDiv >>  8) & 0xFF);
+	state->m_Regs[MD3] = (MainDiv & 0xFF);
+
+	return UpdateRegs(state, MPD, MD3);
+}
+
+static int CalcCalPLL(struct tda_state *state, u32 freq)
+{
+	u8 PostDiv;
+	u8 Div;
+	u64 OscFreq;
+	u32 CalDiv;
+
+	if (!SearchMap3(m_Cal_PLL_Map, freq, &PostDiv, &Div))
+		return -EINVAL;
+
+	OscFreq = (u64)freq * (u64)Div;
+	/* CalDiv = u32( OscFreq * 16384 / 16000000 ); */
+	OscFreq *= (u64)16384;
+	do_div(OscFreq, (u64)16000000);
+	CalDiv = OscFreq;
+
+	state->m_Regs[CPD] = PostDiv;
+	state->m_Regs[CD1] = ((CalDiv >> 16) & 0xFF);
+	state->m_Regs[CD2] = ((CalDiv >>  8) & 0xFF);
+	state->m_Regs[CD3] = (CalDiv & 0xFF);
+
+	return UpdateRegs(state, CPD, CD3);
+}
+
+static int CalibrateRF(struct tda_state *state,
+		       u8 RFBand, u32 freq, s32 *pCprog)
+{
+	int status = 0;
+	u8 Regs[NUM_REGS];
+	do {
+		u8 BP_Filter = 0;
+		u8 GainTaper = 0;
+		u8 RFC_K = 0;
+		u8 RFC_M = 0;
+
+		state->m_Regs[EP4] &= ~0x03; /* CAL_mode = 0 */
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+		state->m_Regs[EB18] |= 0x03;  /* AGC1_Gain = 3 */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+
+		/* Switching off LT (as datasheet says) causes calibration on C1 to fail */
+		/* (Readout of Cprog is allways 255) */
+		if (state->m_Regs[ID] != 0x83)    /* C1: ID == 83, C2: ID == 84 */
+			state->m_Regs[EP3] |= 0x40; /* SM_LT = 1 */
+
+		if (!(SearchMap1(m_BP_Filter_Map, freq, &BP_Filter) &&
+			SearchMap1(m_GainTaper_Map, freq, &GainTaper) &&
+			SearchMap3(m_KM_Map, freq, &RFC_K, &RFC_M)))
+			return -EINVAL;
+
+		state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | BP_Filter;
+		state->m_Regs[EP2] = (RFBand << 5) | GainTaper;
+
+		state->m_Regs[EB13] = (state->m_Regs[EB13] & ~0x7C) | (RFC_K << 4) | (RFC_M << 2);
+
+		status = UpdateRegs(state, EP1, EP3);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EB13);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB4] |= 0x20;    /* LO_ForceSrce = 1 */
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB7] |= 0x20;    /* CAL_ForceSrce = 1 */
+		status = UpdateReg(state, EB7);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB14] = 0; /* RFC_Cprog = 0 */
+		status = UpdateReg(state, EB14);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB20] &= ~0x20;  /* ForceLock = 0; */
+		status = UpdateReg(state, EB20);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EP4] |= 0x03;  /* CAL_Mode = 3 */
+		status = UpdateRegs(state, EP4, EP5);
+		if (status < 0)
+			break;
+
+		status = CalcCalPLL(state, freq);
+		if (status < 0)
+			break;
+		status = CalcMainPLL(state, freq + 1000000);
+		if (status < 0)
+			break;
+
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB4] &= ~0x20;    /* LO_ForceSrce = 0 */
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EB7] &= ~0x20;    /* CAL_ForceSrce = 0 */
+		status = UpdateReg(state, EB7);
+		if (status < 0)
+			break;
+		msleep(10);
+
+		state->m_Regs[EB20] |= 0x20;  /* ForceLock = 1; */
+		status = UpdateReg(state, EB20);
+		if (status < 0)
+			break;
+		msleep(60);
+
+		state->m_Regs[EP4] &= ~0x03;  /* CAL_Mode = 0 */
+		state->m_Regs[EP3] &= ~0x40; /* SM_LT = 0 */
+		state->m_Regs[EB18] &= ~0x03;  /* AGC1_Gain = 0 */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+		status = UpdateRegs(state, EP3, EP4);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+
+		status = ReadExtented(state, Regs);
+		if (status < 0)
+			break;
+
+		*pCprog = Regs[EB14];
+
+	} while (0);
+	return status;
+}
+
+static int RFTrackingFiltersInit(struct tda_state *state,
+				 u8 RFBand)
+{
+	int status = 0;
+
+	u32   RF1 = m_RF_Band_Map[RFBand].m_RF1_Default;
+	u32   RF2 = m_RF_Band_Map[RFBand].m_RF2_Default;
+	u32   RF3 = m_RF_Band_Map[RFBand].m_RF3_Default;
+	bool    bcal = false;
+
+	s32    Cprog_cal1 = 0;
+	s32    Cprog_table1 = 0;
+	s32    Cprog_cal2 = 0;
+	s32    Cprog_table2 = 0;
+	s32    Cprog_cal3 = 0;
+	s32    Cprog_table3 = 0;
+
+	state->m_RF_A1[RFBand] = 0;
+	state->m_RF_B1[RFBand] = 0;
+	state->m_RF_A2[RFBand] = 0;
+	state->m_RF_B2[RFBand] = 0;
+
+	do {
+		status = PowerScan(state, RFBand, RF1, &RF1, &bcal);
+		if (status < 0)
+			break;
+		if (bcal) {
+			status = CalibrateRF(state, RFBand, RF1, &Cprog_cal1);
+			if (status < 0)
+				break;
+		}
+		SearchMap2(m_RF_Cal_Map, RF1, &Cprog_table1);
+		if (!bcal)
+			Cprog_cal1 = Cprog_table1;
+		state->m_RF_B1[RFBand] = Cprog_cal1 - Cprog_table1;
+		/* state->m_RF_A1[RF_Band] = ???? */
+
+		if (RF2 == 0)
+			break;
+
+		status = PowerScan(state, RFBand, RF2, &RF2, &bcal);
+		if (status < 0)
+			break;
+		if (bcal) {
+			status = CalibrateRF(state, RFBand, RF2, &Cprog_cal2);
+			if (status < 0)
+				break;
+		}
+		SearchMap2(m_RF_Cal_Map, RF2, &Cprog_table2);
+		if (!bcal)
+			Cprog_cal2 = Cprog_table2;
+
+		state->m_RF_A1[RFBand] =
+			(Cprog_cal2 - Cprog_table2 - Cprog_cal1 + Cprog_table1) /
+			((s32)(RF2) - (s32)(RF1));
+
+		if (RF3 == 0)
+			break;
+
+		status = PowerScan(state, RFBand, RF3, &RF3, &bcal);
+		if (status < 0)
+			break;
+		if (bcal) {
+			status = CalibrateRF(state, RFBand, RF3, &Cprog_cal3);
+			if (status < 0)
+				break;
+		}
+		SearchMap2(m_RF_Cal_Map, RF3, &Cprog_table3);
+		if (!bcal)
+			Cprog_cal3 = Cprog_table3;
+		state->m_RF_A2[RFBand] = (Cprog_cal3 - Cprog_table3 - Cprog_cal2 + Cprog_table2) / ((s32)(RF3) - (s32)(RF2));
+		state->m_RF_B2[RFBand] = Cprog_cal2 - Cprog_table2;
+
+	} while (0);
+
+	state->m_RF1[RFBand] = RF1;
+	state->m_RF2[RFBand] = RF2;
+	state->m_RF3[RFBand] = RF3;
+
+#if 0
+	printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__,
+	       RFBand, RF1, state->m_RF_A1[RFBand], state->m_RF_B1[RFBand], RF2,
+	       state->m_RF_A2[RFBand], state->m_RF_B2[RFBand], RF3);
+#endif
+
+	return status;
+}
+
+static int PowerScan(struct tda_state *state,
+		     u8 RFBand, u32 RF_in, u32 *pRF_Out, bool *pbcal)
+{
+	int status = 0;
+	do {
+		u8   Gain_Taper = 0;
+		s32  RFC_Cprog = 0;
+		u8   CID_Target = 0;
+		u8   CountLimit = 0;
+		u32  freq_MainPLL;
+		u8   Regs[NUM_REGS];
+		u8   CID_Gain;
+		s32  Count = 0;
+		int  sign  = 1;
+		bool wait = false;
+
+		if (!(SearchMap2(m_RF_Cal_Map, RF_in, &RFC_Cprog) &&
+		      SearchMap1(m_GainTaper_Map, RF_in, &Gain_Taper) &&
+		      SearchMap3(m_CID_Target_Map, RF_in, &CID_Target, &CountLimit))) {
+
+			printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__);
+			return -EINVAL;
+		}
+
+		state->m_Regs[EP2] = (RFBand << 5) | Gain_Taper;
+		state->m_Regs[EB14] = (RFC_Cprog);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EB14);
+		if (status < 0)
+			break;
+
+		freq_MainPLL = RF_in + 1000000;
+		status = CalcMainPLL(state, freq_MainPLL);
+		if (status < 0)
+			break;
+		msleep(5);
+		state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x03) | 1;    /* CAL_mode = 1 */
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP2);  /* Launch power measurement */
+		if (status < 0)
+			break;
+		status = ReadExtented(state, Regs);
+		if (status < 0)
+			break;
+		CID_Gain = Regs[EB10] & 0x3F;
+		state->m_Regs[ID] = Regs[ID];  /* Chip version, (needed for C1 workarround in CalibrateRF) */
+
+		*pRF_Out = RF_in;
+
+		while (CID_Gain < CID_Target) {
+			freq_MainPLL = RF_in + sign * Count + 1000000;
+			status = CalcMainPLL(state, freq_MainPLL);
+			if (status < 0)
+				break;
+			msleep(wait ? 5 : 1);
+			wait = false;
+			status = UpdateReg(state, EP2);  /* Launch power measurement */
+			if (status < 0)
+				break;
+			status = ReadExtented(state, Regs);
+			if (status < 0)
+				break;
+			CID_Gain = Regs[EB10] & 0x3F;
+			Count += 200000;
+
+			if (Count < CountLimit * 100000)
+				continue;
+			if (sign < 0)
+				break;
+
+			sign = -sign;
+			Count = 200000;
+			wait = true;
+		}
+		status = status;
+		if (status < 0)
+			break;
+		if (CID_Gain >= CID_Target) {
+			*pbcal = true;
+			*pRF_Out = freq_MainPLL - 1000000;
+		} else
+			*pbcal = false;
+	} while (0);
+
+	return status;
+}
+
+static int PowerScanInit(struct tda_state *state)
+{
+	int status = 0;
+	do {
+		state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | 0x12;
+		state->m_Regs[EP4] = (state->m_Regs[EP4] & ~0x1F); /* If level = 0, Cal mode = 0 */
+		status = UpdateRegs(state, EP3, EP4);
+		if (status < 0)
+			break;
+		state->m_Regs[EB18] = (state->m_Regs[EB18] & ~0x03); /* AGC 1 Gain = 0 */
+		status = UpdateReg(state, EB18);
+		if (status < 0)
+			break;
+		state->m_Regs[EB21] = (state->m_Regs[EB21] & ~0x03); /* AGC 2 Gain = 0 (Datasheet = 3) */
+		state->m_Regs[EB23] = (state->m_Regs[EB23] | 0x06); /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */
+		status = UpdateRegs(state, EB21, EB23);
+		if (status < 0)
+			break;
+	} while (0);
+	return status;
+}
+
+static int CalcRFFilterCurve(struct tda_state *state)
+{
+	int status = 0;
+	do {
+		msleep(200);      /* Temperature stabilisation */
+		status = PowerScanInit(state);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 0);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 1);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 2);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 3);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 4);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 5);
+		if (status < 0)
+			break;
+		status = RFTrackingFiltersInit(state, 6);
+		if (status < 0)
+			break;
+		status = ThermometerRead(state, &state->m_TMValue_RFCal); /* also switches off Cal mode !!! */
+		if (status < 0)
+			break;
+	} while (0);
+
+	return status;
+}
+
+static int FixedContentsI2CUpdate(struct tda_state *state)
+{
+	static u8 InitRegs[] = {
+		0x08, 0x80, 0xC6,
+		0xDF, 0x16, 0x60, 0x80,
+		0x80, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00,
+		0xFC, 0x01, 0x84, 0x41,
+		0x01, 0x84, 0x40, 0x07,
+		0x00, 0x00, 0x96, 0x3F,
+		0xC1, 0x00, 0x8F, 0x00,
+		0x00, 0x8C, 0x00, 0x20,
+		0xB3, 0x48, 0xB0,
+	};
+	int status = 0;
+	memcpy(&state->m_Regs[TM], InitRegs, EB23 - TM + 1);
+	do {
+		status = UpdateRegs(state, TM, EB23);
+		if (status < 0)
+			break;
+
+		/* AGC1 gain setup */
+		state->m_Regs[EB17] = 0x00;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+		state->m_Regs[EB17] = 0x03;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+		state->m_Regs[EB17] = 0x43;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+		state->m_Regs[EB17] = 0x4C;
+		status = UpdateReg(state, EB17);
+		if (status < 0)
+			break;
+
+		/* IRC Cal Low band */
+		state->m_Regs[EP3] = 0x1F;
+		state->m_Regs[EP4] = 0x66;
+		state->m_Regs[EP5] = 0x81;
+		state->m_Regs[CPD] = 0xCC;
+		state->m_Regs[CD1] = 0x6C;
+		state->m_Regs[CD2] = 0x00;
+		state->m_Regs[CD3] = 0x00;
+		state->m_Regs[MPD] = 0xC5;
+		state->m_Regs[MD1] = 0x77;
+		state->m_Regs[MD2] = 0x08;
+		state->m_Regs[MD3] = 0x00;
+		status = UpdateRegs(state, EP2, MD3); /* diff between sw and datasheet (ep3-md3) */
+		if (status < 0)
+			break;
+
+#if 0
+		state->m_Regs[EB4] = 0x61;          /* missing in sw */
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+		msleep(1);
+		state->m_Regs[EB4] = 0x41;
+		status = UpdateReg(state, EB4);
+		if (status < 0)
+			break;
+#endif
+
+		msleep(5);
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		msleep(5);
+
+		state->m_Regs[EP5] = 0x85;
+		state->m_Regs[CPD] = 0xCB;
+		state->m_Regs[CD1] = 0x66;
+		state->m_Regs[CD2] = 0x70;
+		status = UpdateRegs(state, EP3, CD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		msleep(30);
+
+		/* IRC Cal mid band */
+		state->m_Regs[EP5] = 0x82;
+		state->m_Regs[CPD] = 0xA8;
+		state->m_Regs[CD2] = 0x00;
+		state->m_Regs[MPD] = 0xA1; /* Datasheet = 0xA9 */
+		state->m_Regs[MD1] = 0x73;
+		state->m_Regs[MD2] = 0x1A;
+		status = UpdateRegs(state, EP3, MD3);
+		if (status < 0)
+			break;
+
+		msleep(5);
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		msleep(5);
+
+		state->m_Regs[EP5] = 0x86;
+		state->m_Regs[CPD] = 0xA8;
+		state->m_Regs[CD1] = 0x66;
+		state->m_Regs[CD2] = 0xA0;
+		status = UpdateRegs(state, EP3, CD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		msleep(30);
+
+		/* IRC Cal high band */
+		state->m_Regs[EP5] = 0x83;
+		state->m_Regs[CPD] = 0x98;
+		state->m_Regs[CD1] = 0x65;
+		state->m_Regs[CD2] = 0x00;
+		state->m_Regs[MPD] = 0x91;  /* Datasheet = 0x91 */
+		state->m_Regs[MD1] = 0x71;
+		state->m_Regs[MD2] = 0xCD;
+		status = UpdateRegs(state, EP3, MD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+		msleep(5);
+		state->m_Regs[EP5] = 0x87;
+		state->m_Regs[CD1] = 0x65;
+		state->m_Regs[CD2] = 0x50;
+		status = UpdateRegs(state, EP3, CD3);
+		if (status < 0)
+			break;
+		msleep(5);
+		status = UpdateReg(state, EP2);
+		if (status < 0)
+			break;
+		msleep(30);
+
+		/* Back to normal */
+		state->m_Regs[EP4] = 0x64;
+		status = UpdateReg(state, EP4);
+		if (status < 0)
+			break;
+		status = UpdateReg(state, EP1);
+		if (status < 0)
+			break;
+
+	} while (0);
+	return status;
+}
+
+static int InitCal(struct tda_state *state)
+{
+	int status = 0;
+
+	do {
+		status = FixedContentsI2CUpdate(state);
+		if (status < 0)
+			break;
+		status = CalcRFFilterCurve(state);
+		if (status < 0)
+			break;
+		status = StandBy(state);
+		if (status < 0)
+			break;
+		/* m_bInitDone = true; */
+	} while (0);
+	return status;
+};
+
+static int RFTrackingFiltersCorrection(struct tda_state *state,
+				       u32 Frequency)
+{
+	int status = 0;
+	s32 Cprog_table;
+	u8 RFBand;
+	u8 dCoverdT;
+
+	if (!SearchMap2(m_RF_Cal_Map, Frequency, &Cprog_table) ||
+	    !SearchMap4(m_RF_Band_Map, Frequency, &RFBand) ||
+	    !SearchMap1(m_RF_Cal_DC_Over_DT_Map, Frequency, &dCoverdT))
+
+		return -EINVAL;
+
+	do {
+		u8 TMValue_Current;
+		u32   RF1 = state->m_RF1[RFBand];
+		u32   RF2 = state->m_RF1[RFBand];
+		u32   RF3 = state->m_RF1[RFBand];
+		s32    RF_A1 = state->m_RF_A1[RFBand];
+		s32    RF_B1 = state->m_RF_B1[RFBand];
+		s32    RF_A2 = state->m_RF_A2[RFBand];
+		s32    RF_B2 = state->m_RF_B2[RFBand];
+		s32 Capprox = 0;
+		int TComp;
+
+		state->m_Regs[EP3] &= ~0xE0;  /* Power up */
+		status = UpdateReg(state, EP3);
+		if (status < 0)
+			break;
+
+		status = ThermometerRead(state, &TMValue_Current);
+		if (status < 0)
+			break;
+
+		if (RF3 == 0 || Frequency < RF2)
+			Capprox = RF_A1 * ((s32)(Frequency) - (s32)(RF1)) + RF_B1 + Cprog_table;
+		else
+			Capprox = RF_A2 * ((s32)(Frequency) - (s32)(RF2)) + RF_B2 + Cprog_table;
+
+		TComp = (int)(dCoverdT) * ((int)(TMValue_Current) - (int)(state->m_TMValue_RFCal))/1000;
+
+		Capprox += TComp;
+
+		if (Capprox < 0)
+			Capprox = 0;
+		else if (Capprox > 255)
+			Capprox = 255;
+
+
+		/* TODO Temperature compensation. There is defenitely a scale factor */
+		/*      missing in the datasheet, so leave it out for now.           */
+		state->m_Regs[EB14] = Capprox;
+
+		status = UpdateReg(state, EB14);
+		if (status < 0)
+			break;
+
+	} while (0);
+	return status;
+}
+
+static int ChannelConfiguration(struct tda_state *state,
+				u32 Frequency, int Standard)
+{
+
+	s32 IntermediateFrequency = m_StandardTable[Standard].m_IFFrequency;
+	int status = 0;
+
+	u8 BP_Filter = 0;
+	u8 RF_Band = 0;
+	u8 GainTaper = 0;
+	u8 IR_Meas = 0;
+
+	state->IF = IntermediateFrequency;
+	/* printk("tda18271c2dd: %s Freq = %d Standard = %d IF = %d\n", __func__, Frequency, Standard, IntermediateFrequency); */
+	/* get values from tables */
+
+	if (!(SearchMap1(m_BP_Filter_Map, Frequency, &BP_Filter) &&
+	       SearchMap1(m_GainTaper_Map, Frequency, &GainTaper) &&
+	       SearchMap1(m_IR_Meas_Map, Frequency, &IR_Meas) &&
+	       SearchMap4(m_RF_Band_Map, Frequency, &RF_Band))) {
+
+		printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__);
+		return -EINVAL;
+	}
+
+	do {
+		state->m_Regs[EP3] = (state->m_Regs[EP3] & ~0x1F) | m_StandardTable[Standard].m_EP3_4_0;
+		state->m_Regs[EP3] &= ~0x04;   /* switch RFAGC to high speed mode */
+
+		/* m_EP4 default for XToutOn, CAL_Mode (0) */
+		state->m_Regs[EP4] = state->m_EP4 | ((Standard > HF_AnalogMax) ? state->m_IFLevelDigital : state->m_IFLevelAnalog);
+		/* state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital; */
+		if (Standard <= HF_AnalogMax)
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelAnalog;
+		else if (Standard <= HF_ATSC)
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBT;
+		else if (Standard <= HF_DVBC)
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDVBC;
+		else
+			state->m_Regs[EP4] = state->m_EP4 | state->m_IFLevelDigital;
+
+		if ((Standard == HF_FM_Radio) && state->m_bFMInput)
+			state->m_Regs[EP4] |= 80;
+
+		state->m_Regs[MPD] &= ~0x80;
+		if (Standard > HF_AnalogMax)
+			state->m_Regs[MPD] |= 0x80; /* Add IF_notch for digital */
+
+		state->m_Regs[EB22] = m_StandardTable[Standard].m_EB22;
+
+		/* Note: This is missing from flowchart in TDA18271 specification ( 1.5 MHz cutoff for FM ) */
+		if (Standard == HF_FM_Radio)
+			state->m_Regs[EB23] |=  0x06; /* ForceLP_Fc2_En = 1, LPFc[2] = 1 */
+		else
+			state->m_Regs[EB23] &= ~0x06; /* ForceLP_Fc2_En = 0, LPFc[2] = 0 */
+
+		status = UpdateRegs(state, EB22, EB23);
+		if (status < 0)
+			break;
+
+		state->m_Regs[EP1] = (state->m_Regs[EP1] & ~0x07) | 0x40 | BP_Filter;   /* Dis_Power_level = 1, Filter */
+		state->m_Regs[EP5] = (state->m_Regs[EP5] & ~0x07) | IR_Meas;
+		state->m_Regs[EP2] = (RF_Band << 5) | GainTaper;
+
+		state->m_Regs[EB1] = (state->m_Regs[EB1] & ~0x07) |
+			(state->m_bMaster ? 0x04 : 0x00); /* CALVCO_FortLOn = MS */
+		/* AGC1_always_master = 0 */
+		/* AGC_firstn = 0 */
+		status = UpdateReg(state, EB1);
+		if (status < 0)
+			break;
+
+		if (state->m_bMaster) {
+			status = CalcMainPLL(state, Frequency + IntermediateFrequency);
+			if (status < 0)
+				break;
+			status = UpdateRegs(state, TM, EP5);
+			if (status < 0)
+				break;
+			state->m_Regs[EB4] |= 0x20;    /* LO_forceSrce = 1 */
+			status = UpdateReg(state, EB4);
+			if (status < 0)
+				break;
+			msleep(1);
+			state->m_Regs[EB4] &= ~0x20;   /* LO_forceSrce = 0 */
+			status = UpdateReg(state, EB4);
+			if (status < 0)
+				break;
+		} else {
+			u8 PostDiv = 0;
+			u8 Div;
+			status = CalcCalPLL(state, Frequency + IntermediateFrequency);
+			if (status < 0)
+				break;
+
+			SearchMap3(m_Cal_PLL_Map, Frequency + IntermediateFrequency, &PostDiv, &Div);
+			state->m_Regs[MPD] = (state->m_Regs[MPD] & ~0x7F) | (PostDiv & 0x77);
+			status = UpdateReg(state, MPD);
+			if (status < 0)
+				break;
+			status = UpdateRegs(state, TM, EP5);
+			if (status < 0)
+				break;
+
+			state->m_Regs[EB7] |= 0x20;    /* CAL_forceSrce = 1 */
+			status = UpdateReg(state, EB7);
+			if (status < 0)
+				break;
+			msleep(1);
+			state->m_Regs[EB7] &= ~0x20;   /* CAL_forceSrce = 0 */
+			status = UpdateReg(state, EB7);
+			if (status < 0)
+				break;
+		}
+		msleep(20);
+		if (Standard != HF_FM_Radio)
+			state->m_Regs[EP3] |= 0x04;    /* RFAGC to normal mode */
+		status = UpdateReg(state, EP3);
+		if (status < 0)
+			break;
+
+	} while (0);
+	return status;
+}
+
+static int sleep(struct dvb_frontend *fe)
+{
+	struct tda_state *state = fe->tuner_priv;
+
+	StandBy(state);
+	return 0;
+}
+
+static int init(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+/*
+ * As defined on EN 300 429 Annex A and on ITU-T J.83 annex A, the DVB-C
+ * roll-off factor is 0.15.
+ * According with the specs, the amount of the needed bandwith is given by:
+ *	Bw = Symbol_rate * (1 + 0.15)
+ * As such, the maximum symbol rate supported by 6 MHz is
+ *	max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds
+ *NOTE: For ITU-T J.83 Annex C, the roll-off factor is 0.13. So:
+ *	max_symbol_rate = 6 MHz / 1.13 = 5309735 Baud
+ *	That means that an adjustment is needed for Japan,
+ *	but, as currently DRX-K is hardcoded to Annex A, let's stick
+ *	with 0.15 roll-off factor.
+ */
+#define MAX_SYMBOL_RATE_6MHz	5217391
+
+static int set_params(struct dvb_frontend *fe,
+		      struct dvb_frontend_parameters *params)
+{
+	struct tda_state *state = fe->tuner_priv;
+	int status = 0;
+	int Standard;
+
+	state->m_Frequency = params->frequency;
+
+	if (fe->ops.info.type == FE_OFDM)
+		switch (params->u.ofdm.bandwidth) {
+		case BANDWIDTH_6_MHZ:
+			Standard = HF_DVBT_6MHZ;
+			break;
+		case BANDWIDTH_7_MHZ:
+			Standard = HF_DVBT_7MHZ;
+			break;
+		default:
+		case BANDWIDTH_8_MHZ:
+			Standard = HF_DVBT_8MHZ;
+			break;
+		}
+	else if (fe->ops.info.type == FE_QAM) {
+		if (params->u.qam.symbol_rate <= MAX_SYMBOL_RATE_6MHz)
+			Standard = HF_DVBC_6MHZ;
+		else
+			Standard = HF_DVBC_8MHZ;
+	} else
+		return -EINVAL;
+	do {
+		status = RFTrackingFiltersCorrection(state, params->frequency);
+		if (status < 0)
+			break;
+		status = ChannelConfiguration(state, params->frequency, Standard);
+		if (status < 0)
+			break;
+
+		msleep(state->m_SettlingTime);  /* Allow AGC's to settle down */
+	} while (0);
+	return status;
+}
+
+#if 0
+static int GetSignalStrength(s32 *pSignalStrength, u32 RFAgc, u32 IFAgc)
+{
+	if (IFAgc < 500) {
+		/* Scale this from 0 to 50000 */
+		*pSignalStrength = IFAgc * 100;
+	} else {
+		/* Scale range 500-1500 to 50000-80000 */
+		*pSignalStrength = 50000 + (IFAgc - 500) * 30;
+	}
+
+	return 0;
+}
+#endif
+
+static int get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct tda_state *state = fe->tuner_priv;
+
+	*frequency = state->IF;
+	return 0;
+}
+
+static int get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	/* struct tda_state *state = fe->tuner_priv; */
+	/* *bandwidth = priv->bandwidth; */
+	return 0;
+}
+
+
+static struct dvb_tuner_ops tuner_ops = {
+	.info = {
+		.name = "NXP TDA18271C2D",
+		.frequency_min  =  47125000,
+		.frequency_max  = 865000000,
+		.frequency_step =     62500
+	},
+	.init              = init,
+	.sleep             = sleep,
+	.set_params        = set_params,
+	.release           = release,
+	.get_frequency     = get_frequency,
+	.get_bandwidth     = get_bandwidth,
+};
+
+struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
+					 struct i2c_adapter *i2c, u8 adr)
+{
+	struct tda_state *state;
+
+	state = kzalloc(sizeof(struct tda_state), GFP_KERNEL);
+	if (!state)
+		return NULL;
+
+	fe->tuner_priv = state;
+	state->adr = adr;
+	state->i2c = i2c;
+	memcpy(&fe->ops.tuner_ops, &tuner_ops, sizeof(struct dvb_tuner_ops));
+	reset(state);
+	InitCal(state);
+
+	return fe;
+}
+EXPORT_SYMBOL_GPL(tda18271c2dd_attach);
+
+MODULE_DESCRIPTION("TDA18271C2 driver");
+MODULE_AUTHOR("DD");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tda18271c2dd.h b/drivers/media/dvb/frontends/tda18271c2dd.h
new file mode 100644
index 00000000000..1389c74e12c
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda18271c2dd.h
@@ -0,0 +1,16 @@
+#ifndef _TDA18271C2DD_H_
+#define _TDA18271C2DD_H_
+#if defined(CONFIG_DVB_TDA18271C2DD) || (defined(CONFIG_DVB_TDA18271C2DD_MODULE) \
+        && defined(MODULE))
+struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
+					 struct i2c_adapter *i2c, u8 adr);
+#else
+static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
+					 struct i2c_adapter *i2c, u8 adr)
+{
+        printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+        return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/dvb/frontends/tda18271c2dd_maps.h b/drivers/media/dvb/frontends/tda18271c2dd_maps.h
new file mode 100644
index 00000000000..b87661b9df1
--- /dev/null
+++ b/drivers/media/dvb/frontends/tda18271c2dd_maps.h
@@ -0,0 +1,814 @@
+enum HF_S {
+	HF_None = 0, HF_B, HF_DK, HF_G, HF_I, HF_L, HF_L1, HF_MN, HF_FM_Radio,
+	HF_AnalogMax, HF_DVBT_6MHZ, HF_DVBT_7MHZ, HF_DVBT_8MHZ,
+	HF_DVBT, HF_ATSC,  HF_DVBC_6MHZ,  HF_DVBC_7MHZ,
+	HF_DVBC_8MHZ, HF_DVBC
+};
+
+struct SStandardParam m_StandardTable[] = {
+	{       0,        0, 0x00, 0x00 },    /* HF_None */
+	{ 6000000,  7000000, 0x1D, 0x2C },    /* HF_B, */
+	{ 6900000,  8000000, 0x1E, 0x2C },    /* HF_DK, */
+	{ 7100000,  8000000, 0x1E, 0x2C },    /* HF_G, */
+	{ 7250000,  8000000, 0x1E, 0x2C },    /* HF_I, */
+	{ 6900000,  8000000, 0x1E, 0x2C },    /* HF_L, */
+	{ 1250000,  8000000, 0x1E, 0x2C },    /* HF_L1, */
+	{ 5400000,  6000000, 0x1C, 0x2C },    /* HF_MN, */
+	{ 1250000,   500000, 0x18, 0x2C },    /* HF_FM_Radio, */
+	{       0,        0, 0x00, 0x00 },    /* HF_AnalogMax (Unused) */
+	{ 3300000,  6000000, 0x1C, 0x58 },    /* HF_DVBT_6MHZ */
+	{ 3500000,  7000000, 0x1C, 0x37 },    /* HF_DVBT_7MHZ */
+	{ 4000000,  8000000, 0x1D, 0x37 },    /* HF_DVBT_8MHZ */
+	{       0,        0, 0x00, 0x00 },    /* HF_DVBT (Unused) */
+	{ 5000000,  6000000, 0x1C, 0x37 },    /* HF_ATSC  (center = 3.25 MHz) */
+	{ 4000000,  6000000, 0x1D, 0x58 },    /* HF_DVBC_6MHZ (Chicago) */
+	{ 4500000,  7000000, 0x1E, 0x37 },    /* HF_DVBC_7MHZ (not documented by NXP) */
+	{ 5000000,  8000000, 0x1F, 0x37 },    /* HF_DVBC_8MHZ */
+	{       0,        0, 0x00, 0x00 },    /* HF_DVBC (Unused) */
+};
+
+struct SMap  m_BP_Filter_Map[] = {
+	{   62000000,  0x00 },
+	{   84000000,  0x01 },
+	{  100000000,  0x02 },
+	{  140000000,  0x03 },
+	{  170000000,  0x04 },
+	{  180000000,  0x05 },
+	{  865000000,  0x06 },
+	{          0,  0x00 },    /* Table End */
+};
+
+static struct SMapI m_RF_Cal_Map[] = {
+	{   41000000,  0x0F },
+	{   43000000,  0x1C },
+	{   45000000,  0x2F },
+	{   46000000,  0x39 },
+	{   47000000,  0x40 },
+	{   47900000,  0x50 },
+	{   49100000,  0x16 },
+	{   50000000,  0x18 },
+	{   51000000,  0x20 },
+	{   53000000,  0x28 },
+	{   55000000,  0x2B },
+	{   56000000,  0x32 },
+	{   57000000,  0x35 },
+	{   58000000,  0x3E },
+	{   59000000,  0x43 },
+	{   60000000,  0x4E },
+	{   61100000,  0x55 },
+	{   63000000,  0x0F },
+	{   64000000,  0x11 },
+	{   65000000,  0x12 },
+	{   66000000,  0x15 },
+	{   67000000,  0x16 },
+	{   68000000,  0x17 },
+	{   70000000,  0x19 },
+	{   71000000,  0x1C },
+	{   72000000,  0x1D },
+	{   73000000,  0x1F },
+	{   74000000,  0x20 },
+	{   75000000,  0x21 },
+	{   76000000,  0x24 },
+	{   77000000,  0x25 },
+	{   78000000,  0x27 },
+	{   80000000,  0x28 },
+	{   81000000,  0x29 },
+	{   82000000,  0x2D },
+	{   83000000,  0x2E },
+	{   84000000,  0x2F },
+	{   85000000,  0x31 },
+	{   86000000,  0x33 },
+	{   87000000,  0x34 },
+	{   88000000,  0x35 },
+	{   89000000,  0x37 },
+	{   90000000,  0x38 },
+	{   91000000,  0x39 },
+	{   93000000,  0x3C },
+	{   94000000,  0x3E },
+	{   95000000,  0x3F },
+	{   96000000,  0x40 },
+	{   97000000,  0x42 },
+	{   99000000,  0x45 },
+	{  100000000,  0x46 },
+	{  102000000,  0x48 },
+	{  103000000,  0x4A },
+	{  105000000,  0x4D },
+	{  106000000,  0x4E },
+	{  107000000,  0x50 },
+	{  108000000,  0x51 },
+	{  110000000,  0x54 },
+	{  111000000,  0x56 },
+	{  112000000,  0x57 },
+	{  113000000,  0x58 },
+	{  114000000,  0x59 },
+	{  115000000,  0x5C },
+	{  116000000,  0x5D },
+	{  117000000,  0x5F },
+	{  119000000,  0x60 },
+	{  120000000,  0x64 },
+	{  121000000,  0x65 },
+	{  122000000,  0x66 },
+	{  123000000,  0x68 },
+	{  124000000,  0x69 },
+	{  125000000,  0x6C },
+	{  126000000,  0x6D },
+	{  127000000,  0x6E },
+	{  128000000,  0x70 },
+	{  129000000,  0x71 },
+	{  130000000,  0x75 },
+	{  131000000,  0x77 },
+	{  132000000,  0x78 },
+	{  133000000,  0x7B },
+	{  134000000,  0x7E },
+	{  135000000,  0x81 },
+	{  136000000,  0x82 },
+	{  137000000,  0x87 },
+	{  138000000,  0x88 },
+	{  139000000,  0x8D },
+	{  140000000,  0x8E },
+	{  141000000,  0x91 },
+	{  142000000,  0x95 },
+	{  143000000,  0x9A },
+	{  144000000,  0x9D },
+	{  145000000,  0xA1 },
+	{  146000000,  0xA2 },
+	{  147000000,  0xA4 },
+	{  148000000,  0xA9 },
+	{  149000000,  0xAE },
+	{  150000000,  0xB0 },
+	{  151000000,  0xB1 },
+	{  152000000,  0xB7 },
+	{  152600000,  0xBD },
+	{  154000000,  0x20 },
+	{  155000000,  0x22 },
+	{  156000000,  0x24 },
+	{  157000000,  0x25 },
+	{  158000000,  0x27 },
+	{  159000000,  0x29 },
+	{  160000000,  0x2C },
+	{  161000000,  0x2D },
+	{  163000000,  0x2E },
+	{  164000000,  0x2F },
+	{  164700000,  0x30 },
+	{  166000000,  0x11 },
+	{  167000000,  0x12 },
+	{  168000000,  0x13 },
+	{  169000000,  0x14 },
+	{  170000000,  0x15 },
+	{  172000000,  0x16 },
+	{  173000000,  0x17 },
+	{  174000000,  0x18 },
+	{  175000000,  0x1A },
+	{  176000000,  0x1B },
+	{  178000000,  0x1D },
+	{  179000000,  0x1E },
+	{  180000000,  0x1F },
+	{  181000000,  0x20 },
+	{  182000000,  0x21 },
+	{  183000000,  0x22 },
+	{  184000000,  0x24 },
+	{  185000000,  0x25 },
+	{  186000000,  0x26 },
+	{  187000000,  0x27 },
+	{  188000000,  0x29 },
+	{  189000000,  0x2A },
+	{  190000000,  0x2C },
+	{  191000000,  0x2D },
+	{  192000000,  0x2E },
+	{  193000000,  0x2F },
+	{  194000000,  0x30 },
+	{  195000000,  0x33 },
+	{  196000000,  0x35 },
+	{  198000000,  0x36 },
+	{  200000000,  0x38 },
+	{  201000000,  0x3C },
+	{  202000000,  0x3D },
+	{  203500000,  0x3E },
+	{  206000000,  0x0E },
+	{  208000000,  0x0F },
+	{  212000000,  0x10 },
+	{  216000000,  0x11 },
+	{  217000000,  0x12 },
+	{  218000000,  0x13 },
+	{  220000000,  0x14 },
+	{  222000000,  0x15 },
+	{  225000000,  0x16 },
+	{  228000000,  0x17 },
+	{  231000000,  0x18 },
+	{  234000000,  0x19 },
+	{  235000000,  0x1A },
+	{  236000000,  0x1B },
+	{  237000000,  0x1C },
+	{  240000000,  0x1D },
+	{  242000000,  0x1E },
+	{  244000000,  0x1F },
+	{  247000000,  0x20 },
+	{  249000000,  0x21 },
+	{  252000000,  0x22 },
+	{  253000000,  0x23 },
+	{  254000000,  0x24 },
+	{  256000000,  0x25 },
+	{  259000000,  0x26 },
+	{  262000000,  0x27 },
+	{  264000000,  0x28 },
+	{  267000000,  0x29 },
+	{  269000000,  0x2A },
+	{  271000000,  0x2B },
+	{  273000000,  0x2C },
+	{  275000000,  0x2D },
+	{  277000000,  0x2E },
+	{  279000000,  0x2F },
+	{  282000000,  0x30 },
+	{  284000000,  0x31 },
+	{  286000000,  0x32 },
+	{  287000000,  0x33 },
+	{  290000000,  0x34 },
+	{  293000000,  0x35 },
+	{  295000000,  0x36 },
+	{  297000000,  0x37 },
+	{  300000000,  0x38 },
+	{  303000000,  0x39 },
+	{  305000000,  0x3A },
+	{  306000000,  0x3B },
+	{  307000000,  0x3C },
+	{  310000000,  0x3D },
+	{  312000000,  0x3E },
+	{  315000000,  0x3F },
+	{  318000000,  0x40 },
+	{  320000000,  0x41 },
+	{  323000000,  0x42 },
+	{  324000000,  0x43 },
+	{  325000000,  0x44 },
+	{  327000000,  0x45 },
+	{  331000000,  0x46 },
+	{  334000000,  0x47 },
+	{  337000000,  0x48 },
+	{  339000000,  0x49 },
+	{  340000000,  0x4A },
+	{  341000000,  0x4B },
+	{  343000000,  0x4C },
+	{  345000000,  0x4D },
+	{  349000000,  0x4E },
+	{  352000000,  0x4F },
+	{  353000000,  0x50 },
+	{  355000000,  0x51 },
+	{  357000000,  0x52 },
+	{  359000000,  0x53 },
+	{  361000000,  0x54 },
+	{  362000000,  0x55 },
+	{  364000000,  0x56 },
+	{  368000000,  0x57 },
+	{  370000000,  0x58 },
+	{  372000000,  0x59 },
+	{  375000000,  0x5A },
+	{  376000000,  0x5B },
+	{  377000000,  0x5C },
+	{  379000000,  0x5D },
+	{  382000000,  0x5E },
+	{  384000000,  0x5F },
+	{  385000000,  0x60 },
+	{  386000000,  0x61 },
+	{  388000000,  0x62 },
+	{  390000000,  0x63 },
+	{  393000000,  0x64 },
+	{  394000000,  0x65 },
+	{  396000000,  0x66 },
+	{  397000000,  0x67 },
+	{  398000000,  0x68 },
+	{  400000000,  0x69 },
+	{  402000000,  0x6A },
+	{  403000000,  0x6B },
+	{  407000000,  0x6C },
+	{  408000000,  0x6D },
+	{  409000000,  0x6E },
+	{  410000000,  0x6F },
+	{  411000000,  0x70 },
+	{  412000000,  0x71 },
+	{  413000000,  0x72 },
+	{  414000000,  0x73 },
+	{  417000000,  0x74 },
+	{  418000000,  0x75 },
+	{  420000000,  0x76 },
+	{  422000000,  0x77 },
+	{  423000000,  0x78 },
+	{  424000000,  0x79 },
+	{  427000000,  0x7A },
+	{  428000000,  0x7B },
+	{  429000000,  0x7D },
+	{  432000000,  0x7F },
+	{  434000000,  0x80 },
+	{  435000000,  0x81 },
+	{  436000000,  0x83 },
+	{  437000000,  0x84 },
+	{  438000000,  0x85 },
+	{  439000000,  0x86 },
+	{  440000000,  0x87 },
+	{  441000000,  0x88 },
+	{  442000000,  0x89 },
+	{  445000000,  0x8A },
+	{  446000000,  0x8B },
+	{  447000000,  0x8C },
+	{  448000000,  0x8E },
+	{  449000000,  0x8F },
+	{  450000000,  0x90 },
+	{  452000000,  0x91 },
+	{  453000000,  0x93 },
+	{  454000000,  0x94 },
+	{  456000000,  0x96 },
+	{  457800000,  0x98 },
+	{  461000000,  0x11 },
+	{  468000000,  0x12 },
+	{  472000000,  0x13 },
+	{  473000000,  0x14 },
+	{  474000000,  0x15 },
+	{  481000000,  0x16 },
+	{  486000000,  0x17 },
+	{  491000000,  0x18 },
+	{  498000000,  0x19 },
+	{  499000000,  0x1A },
+	{  501000000,  0x1B },
+	{  506000000,  0x1C },
+	{  511000000,  0x1D },
+	{  516000000,  0x1E },
+	{  520000000,  0x1F },
+	{  521000000,  0x20 },
+	{  525000000,  0x21 },
+	{  529000000,  0x22 },
+	{  533000000,  0x23 },
+	{  539000000,  0x24 },
+	{  541000000,  0x25 },
+	{  547000000,  0x26 },
+	{  549000000,  0x27 },
+	{  551000000,  0x28 },
+	{  556000000,  0x29 },
+	{  561000000,  0x2A },
+	{  563000000,  0x2B },
+	{  565000000,  0x2C },
+	{  569000000,  0x2D },
+	{  571000000,  0x2E },
+	{  577000000,  0x2F },
+	{  580000000,  0x30 },
+	{  582000000,  0x31 },
+	{  584000000,  0x32 },
+	{  588000000,  0x33 },
+	{  591000000,  0x34 },
+	{  596000000,  0x35 },
+	{  598000000,  0x36 },
+	{  603000000,  0x37 },
+	{  604000000,  0x38 },
+	{  606000000,  0x39 },
+	{  612000000,  0x3A },
+	{  615000000,  0x3B },
+	{  617000000,  0x3C },
+	{  621000000,  0x3D },
+	{  622000000,  0x3E },
+	{  625000000,  0x3F },
+	{  632000000,  0x40 },
+	{  633000000,  0x41 },
+	{  634000000,  0x42 },
+	{  642000000,  0x43 },
+	{  643000000,  0x44 },
+	{  647000000,  0x45 },
+	{  650000000,  0x46 },
+	{  652000000,  0x47 },
+	{  657000000,  0x48 },
+	{  661000000,  0x49 },
+	{  662000000,  0x4A },
+	{  665000000,  0x4B },
+	{  667000000,  0x4C },
+	{  670000000,  0x4D },
+	{  673000000,  0x4E },
+	{  676000000,  0x4F },
+	{  677000000,  0x50 },
+	{  681000000,  0x51 },
+	{  683000000,  0x52 },
+	{  686000000,  0x53 },
+	{  688000000,  0x54 },
+	{  689000000,  0x55 },
+	{  691000000,  0x56 },
+	{  695000000,  0x57 },
+	{  698000000,  0x58 },
+	{  703000000,  0x59 },
+	{  704000000,  0x5A },
+	{  705000000,  0x5B },
+	{  707000000,  0x5C },
+	{  710000000,  0x5D },
+	{  712000000,  0x5E },
+	{  717000000,  0x5F },
+	{  718000000,  0x60 },
+	{  721000000,  0x61 },
+	{  722000000,  0x62 },
+	{  723000000,  0x63 },
+	{  725000000,  0x64 },
+	{  727000000,  0x65 },
+	{  730000000,  0x66 },
+	{  732000000,  0x67 },
+	{  735000000,  0x68 },
+	{  740000000,  0x69 },
+	{  741000000,  0x6A },
+	{  742000000,  0x6B },
+	{  743000000,  0x6C },
+	{  745000000,  0x6D },
+	{  747000000,  0x6E },
+	{  748000000,  0x6F },
+	{  750000000,  0x70 },
+	{  752000000,  0x71 },
+	{  754000000,  0x72 },
+	{  757000000,  0x73 },
+	{  758000000,  0x74 },
+	{  760000000,  0x75 },
+	{  763000000,  0x76 },
+	{  764000000,  0x77 },
+	{  766000000,  0x78 },
+	{  767000000,  0x79 },
+	{  768000000,  0x7A },
+	{  773000000,  0x7B },
+	{  774000000,  0x7C },
+	{  776000000,  0x7D },
+	{  777000000,  0x7E },
+	{  778000000,  0x7F },
+	{  779000000,  0x80 },
+	{  781000000,  0x81 },
+	{  783000000,  0x82 },
+	{  784000000,  0x83 },
+	{  785000000,  0x84 },
+	{  786000000,  0x85 },
+	{  793000000,  0x86 },
+	{  794000000,  0x87 },
+	{  795000000,  0x88 },
+	{  797000000,  0x89 },
+	{  799000000,  0x8A },
+	{  801000000,  0x8B },
+	{  802000000,  0x8C },
+	{  803000000,  0x8D },
+	{  804000000,  0x8E },
+	{  810000000,  0x90 },
+	{  811000000,  0x91 },
+	{  812000000,  0x92 },
+	{  814000000,  0x93 },
+	{  816000000,  0x94 },
+	{  817000000,  0x96 },
+	{  818000000,  0x97 },
+	{  820000000,  0x98 },
+	{  821000000,  0x99 },
+	{  822000000,  0x9A },
+	{  828000000,  0x9B },
+	{  829000000,  0x9D },
+	{  830000000,  0x9F },
+	{  831000000,  0xA0 },
+	{  833000000,  0xA1 },
+	{  835000000,  0xA2 },
+	{  836000000,  0xA3 },
+	{  837000000,  0xA4 },
+	{  838000000,  0xA6 },
+	{  840000000,  0xA8 },
+	{  842000000,  0xA9 },
+	{  845000000,  0xAA },
+	{  846000000,  0xAB },
+	{  847000000,  0xAD },
+	{  848000000,  0xAE },
+	{  852000000,  0xAF },
+	{  853000000,  0xB0 },
+	{  858000000,  0xB1 },
+	{  860000000,  0xB2 },
+	{  861000000,  0xB3 },
+	{  862000000,  0xB4 },
+	{  863000000,  0xB6 },
+	{  864000000,  0xB8 },
+	{  865000000,  0xB9 },
+	{          0,  0x00 },    /* Table End */
+};
+
+
+static struct SMap2  m_KM_Map[] = {
+	{   47900000,  3, 2 },
+	{   61100000,  3, 1 },
+	{  350000000,  3, 0 },
+	{  720000000,  2, 1 },
+	{  865000000,  3, 3 },
+	{          0,  0x00 },    /* Table End */
+};
+
+static struct SMap2 m_Main_PLL_Map[] = {
+	{  33125000, 0x57, 0xF0 },
+	{  35500000, 0x56, 0xE0 },
+	{  38188000, 0x55, 0xD0 },
+	{  41375000, 0x54, 0xC0 },
+	{  45125000, 0x53, 0xB0 },
+	{  49688000, 0x52, 0xA0 },
+	{  55188000, 0x51, 0x90 },
+	{  62125000, 0x50, 0x80 },
+	{  66250000, 0x47, 0x78 },
+	{  71000000, 0x46, 0x70 },
+	{  76375000, 0x45, 0x68 },
+	{  82750000, 0x44, 0x60 },
+	{  90250000, 0x43, 0x58 },
+	{  99375000, 0x42, 0x50 },
+	{ 110375000, 0x41, 0x48 },
+	{ 124250000, 0x40, 0x40 },
+	{ 132500000, 0x37, 0x3C },
+	{ 142000000, 0x36, 0x38 },
+	{ 152750000, 0x35, 0x34 },
+	{ 165500000, 0x34, 0x30 },
+	{ 180500000, 0x33, 0x2C },
+	{ 198750000, 0x32, 0x28 },
+	{ 220750000, 0x31, 0x24 },
+	{ 248500000, 0x30, 0x20 },
+	{ 265000000, 0x27, 0x1E },
+	{ 284000000, 0x26, 0x1C },
+	{ 305500000, 0x25, 0x1A },
+	{ 331000000, 0x24, 0x18 },
+	{ 361000000, 0x23, 0x16 },
+	{ 397500000, 0x22, 0x14 },
+	{ 441500000, 0x21, 0x12 },
+	{ 497000000, 0x20, 0x10 },
+	{ 530000000, 0x17, 0x0F },
+	{ 568000000, 0x16, 0x0E },
+	{ 611000000, 0x15, 0x0D },
+	{ 662000000, 0x14, 0x0C },
+	{ 722000000, 0x13, 0x0B },
+	{ 795000000, 0x12, 0x0A },
+	{ 883000000, 0x11, 0x09 },
+	{ 994000000, 0x10, 0x08 },
+	{         0, 0x00, 0x00 },    /* Table End */
+};
+
+static struct SMap2 m_Cal_PLL_Map[] = {
+	{  33813000, 0xDD, 0xD0 },
+	{  36625000, 0xDC, 0xC0 },
+	{  39938000, 0xDB, 0xB0 },
+	{  43938000, 0xDA, 0xA0 },
+	{  48813000, 0xD9, 0x90 },
+	{  54938000, 0xD8, 0x80 },
+	{  62813000, 0xD3, 0x70 },
+	{  67625000, 0xCD, 0x68 },
+	{  73250000, 0xCC, 0x60 },
+	{  79875000, 0xCB, 0x58 },
+	{  87875000, 0xCA, 0x50 },
+	{  97625000, 0xC9, 0x48 },
+	{ 109875000, 0xC8, 0x40 },
+	{ 125625000, 0xC3, 0x38 },
+	{ 135250000, 0xBD, 0x34 },
+	{ 146500000, 0xBC, 0x30 },
+	{ 159750000, 0xBB, 0x2C },
+	{ 175750000, 0xBA, 0x28 },
+	{ 195250000, 0xB9, 0x24 },
+	{ 219750000, 0xB8, 0x20 },
+	{ 251250000, 0xB3, 0x1C },
+	{ 270500000, 0xAD, 0x1A },
+	{ 293000000, 0xAC, 0x18 },
+	{ 319500000, 0xAB, 0x16 },
+	{ 351500000, 0xAA, 0x14 },
+	{ 390500000, 0xA9, 0x12 },
+	{ 439500000, 0xA8, 0x10 },
+	{ 502500000, 0xA3, 0x0E },
+	{ 541000000, 0x9D, 0x0D },
+	{ 586000000, 0x9C, 0x0C },
+	{ 639000000, 0x9B, 0x0B },
+	{ 703000000, 0x9A, 0x0A },
+	{ 781000000, 0x99, 0x09 },
+	{ 879000000, 0x98, 0x08 },
+	{         0, 0x00, 0x00 },    /* Table End */
+};
+
+static struct SMap  m_GainTaper_Map[] = {
+	{  45400000, 0x1F },
+	{  45800000, 0x1E },
+	{  46200000, 0x1D },
+	{  46700000, 0x1C },
+	{  47100000, 0x1B },
+	{  47500000, 0x1A },
+	{  47900000, 0x19 },
+	{  49600000, 0x17 },
+	{  51200000, 0x16 },
+	{  52900000, 0x15 },
+	{  54500000, 0x14 },
+	{  56200000, 0x13 },
+	{  57800000, 0x12 },
+	{  59500000, 0x11 },
+	{  61100000, 0x10 },
+	{  67600000, 0x0D },
+	{  74200000, 0x0C },
+	{  80700000, 0x0B },
+	{  87200000, 0x0A },
+	{  93800000, 0x09 },
+	{ 100300000, 0x08 },
+	{ 106900000, 0x07 },
+	{ 113400000, 0x06 },
+	{ 119900000, 0x05 },
+	{ 126500000, 0x04 },
+	{ 133000000, 0x03 },
+	{ 139500000, 0x02 },
+	{ 146100000, 0x01 },
+	{ 152600000, 0x00 },
+	{ 154300000, 0x1F },
+	{ 156100000, 0x1E },
+	{ 157800000, 0x1D },
+	{ 159500000, 0x1C },
+	{ 161200000, 0x1B },
+	{ 163000000, 0x1A },
+	{ 164700000, 0x19 },
+	{ 170200000, 0x17 },
+	{ 175800000, 0x16 },
+	{ 181300000, 0x15 },
+	{ 186900000, 0x14 },
+	{ 192400000, 0x13 },
+	{ 198000000, 0x12 },
+	{ 203500000, 0x11 },
+	{ 216200000, 0x14 },
+	{ 228900000, 0x13 },
+	{ 241600000, 0x12 },
+	{ 254400000, 0x11 },
+	{ 267100000, 0x10 },
+	{ 279800000, 0x0F },
+	{ 292500000, 0x0E },
+	{ 305200000, 0x0D },
+	{ 317900000, 0x0C },
+	{ 330700000, 0x0B },
+	{ 343400000, 0x0A },
+	{ 356100000, 0x09 },
+	{ 368800000, 0x08 },
+	{ 381500000, 0x07 },
+	{ 394200000, 0x06 },
+	{ 406900000, 0x05 },
+	{ 419700000, 0x04 },
+	{ 432400000, 0x03 },
+	{ 445100000, 0x02 },
+	{ 457800000, 0x01 },
+	{ 476300000, 0x19 },
+	{ 494800000, 0x18 },
+	{ 513300000, 0x17 },
+	{ 531800000, 0x16 },
+	{ 550300000, 0x15 },
+	{ 568900000, 0x14 },
+	{ 587400000, 0x13 },
+	{ 605900000, 0x12 },
+	{ 624400000, 0x11 },
+	{ 642900000, 0x10 },
+	{ 661400000, 0x0F },
+	{ 679900000, 0x0E },
+	{ 698400000, 0x0D },
+	{ 716900000, 0x0C },
+	{ 735400000, 0x0B },
+	{ 753900000, 0x0A },
+	{ 772500000, 0x09 },
+	{ 791000000, 0x08 },
+	{ 809500000, 0x07 },
+	{ 828000000, 0x06 },
+	{ 846500000, 0x05 },
+	{ 865000000, 0x04 },
+	{         0, 0x00 },    /* Table End */
+};
+
+static struct SMap m_RF_Cal_DC_Over_DT_Map[] = {
+	{  47900000, 0x00 },
+	{  55000000, 0x00 },
+	{  61100000, 0x0A },
+	{  64000000, 0x0A },
+	{  82000000, 0x14 },
+	{  84000000, 0x19 },
+	{ 119000000, 0x1C },
+	{ 124000000, 0x20 },
+	{ 129000000, 0x2A },
+	{ 134000000, 0x32 },
+	{ 139000000, 0x39 },
+	{ 144000000, 0x3E },
+	{ 149000000, 0x3F },
+	{ 152600000, 0x40 },
+	{ 154000000, 0x40 },
+	{ 164700000, 0x41 },
+	{ 203500000, 0x32 },
+	{ 353000000, 0x19 },
+	{ 356000000, 0x1A },
+	{ 359000000, 0x1B },
+	{ 363000000, 0x1C },
+	{ 366000000, 0x1D },
+	{ 369000000, 0x1E },
+	{ 373000000, 0x1F },
+	{ 376000000, 0x20 },
+	{ 379000000, 0x21 },
+	{ 383000000, 0x22 },
+	{ 386000000, 0x23 },
+	{ 389000000, 0x24 },
+	{ 393000000, 0x25 },
+	{ 396000000, 0x26 },
+	{ 399000000, 0x27 },
+	{ 402000000, 0x28 },
+	{ 404000000, 0x29 },
+	{ 407000000, 0x2A },
+	{ 409000000, 0x2B },
+	{ 412000000, 0x2C },
+	{ 414000000, 0x2D },
+	{ 417000000, 0x2E },
+	{ 419000000, 0x2F },
+	{ 422000000, 0x30 },
+	{ 424000000, 0x31 },
+	{ 427000000, 0x32 },
+	{ 429000000, 0x33 },
+	{ 432000000, 0x34 },
+	{ 434000000, 0x35 },
+	{ 437000000, 0x36 },
+	{ 439000000, 0x37 },
+	{ 442000000, 0x38 },
+	{ 444000000, 0x39 },
+	{ 447000000, 0x3A },
+	{ 449000000, 0x3B },
+	{ 457800000, 0x3C },
+	{ 465000000, 0x0F },
+	{ 477000000, 0x12 },
+	{ 483000000, 0x14 },
+	{ 502000000, 0x19 },
+	{ 508000000, 0x1B },
+	{ 519000000, 0x1C },
+	{ 522000000, 0x1D },
+	{ 524000000, 0x1E },
+	{ 534000000, 0x1F },
+	{ 549000000, 0x20 },
+	{ 554000000, 0x22 },
+	{ 584000000, 0x24 },
+	{ 589000000, 0x26 },
+	{ 658000000, 0x27 },
+	{ 664000000, 0x2C },
+	{ 669000000, 0x2D },
+	{ 699000000, 0x2E },
+	{ 704000000, 0x30 },
+	{ 709000000, 0x31 },
+	{ 714000000, 0x32 },
+	{ 724000000, 0x33 },
+	{ 729000000, 0x36 },
+	{ 739000000, 0x38 },
+	{ 744000000, 0x39 },
+	{ 749000000, 0x3B },
+	{ 754000000, 0x3C },
+	{ 759000000, 0x3D },
+	{ 764000000, 0x3E },
+	{ 769000000, 0x3F },
+	{ 774000000, 0x40 },
+	{ 779000000, 0x41 },
+	{ 784000000, 0x43 },
+	{ 789000000, 0x46 },
+	{ 794000000, 0x48 },
+	{ 799000000, 0x4B },
+	{ 804000000, 0x4F },
+	{ 809000000, 0x54 },
+	{ 814000000, 0x59 },
+	{ 819000000, 0x5D },
+	{ 824000000, 0x61 },
+	{ 829000000, 0x68 },
+	{ 834000000, 0x6E },
+	{ 839000000, 0x75 },
+	{ 844000000, 0x7E },
+	{ 849000000, 0x82 },
+	{ 854000000, 0x84 },
+	{ 859000000, 0x8F },
+	{ 865000000, 0x9A },
+	{         0, 0x00 },    /* Table End */
+};
+
+
+static struct SMap  m_IR_Meas_Map[] = {
+	{ 200000000, 0x05 },
+	{ 400000000, 0x06 },
+	{ 865000000, 0x07 },
+	{         0, 0x00 },    /* Table End */
+};
+
+static struct SMap2 m_CID_Target_Map[] = {
+	{  46000000, 0x04, 18 },
+	{  52200000, 0x0A, 15 },
+	{  70100000, 0x01, 40 },
+	{ 136800000, 0x18, 40 },
+	{ 156700000, 0x18, 40 },
+	{ 186250000, 0x0A, 40 },
+	{ 230000000, 0x0A, 40 },
+	{ 345000000, 0x18, 40 },
+	{ 426000000, 0x0E, 40 },
+	{ 489500000, 0x1E, 40 },
+	{ 697500000, 0x32, 40 },
+	{ 842000000, 0x3A, 40 },
+	{         0, 0x00,  0 },    /* Table End */
+};
+
+static struct SRFBandMap  m_RF_Band_Map[7] = {
+	{   47900000,   46000000,           0,          0},
+	{   61100000,   52200000,           0,          0},
+	{  152600000,   70100000,   136800000,          0},
+	{  164700000,  156700000,           0,          0},
+	{  203500000,  186250000,           0,          0},
+	{  457800000,  230000000,   345000000,  426000000},
+	{  865000000,  489500000,   697500000,  842000000},
+};
+
+u8 m_Thermometer_Map_1[16] = {
+	60, 62, 66, 64,
+	74, 72, 68, 70,
+	90, 88, 84, 86,
+	76, 78, 82, 80,
+};
+
+u8 m_Thermometer_Map_2[16] = {
+	92, 94, 98, 96,
+	106, 104, 100, 102,
+	122, 120, 116, 118,
+	108, 110, 114, 112,
+};
diff --git a/drivers/media/dvb/ngene/Kconfig b/drivers/media/dvb/ngene/Kconfig
index cec242b7c00..64c84702ba5 100644
--- a/drivers/media/dvb/ngene/Kconfig
+++ b/drivers/media/dvb/ngene/Kconfig
@@ -5,6 +5,8 @@ config DVB_NGENE
 	select DVB_STV6110x if !DVB_FE_CUSTOMISE
 	select DVB_STV090x if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
 	---help---
 	  Support for Micronas PCI express cards with nGene bridge.
diff --git a/drivers/media/dvb/ngene/ngene-cards.c b/drivers/media/dvb/ngene/ngene-cards.c
index fcf4be901ec..05641922836 100644
--- a/drivers/media/dvb/ngene/ngene-cards.c
+++ b/drivers/media/dvb/ngene/ngene-cards.c
@@ -40,6 +40,8 @@
 #include "lnbh24.h"
 #include "lgdt330x.h"
 #include "mt2131.h"
+#include "tda18271c2dd.h"
+#include "drxk.h"
 
 
 /****************************************************************************/
@@ -83,6 +85,49 @@ static int tuner_attach_stv6110(struct ngene_channel *chan)
 }
 
 
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct ngene_channel *chan = fe->sec_priv;
+	int status;
+
+	if (enable) {
+		down(&chan->dev->pll_mutex);
+		status = chan->gate_ctrl(fe, 1);
+	} else {
+		status = chan->gate_ctrl(fe, 0);
+		up(&chan->dev->pll_mutex);
+	}
+	return status;
+}
+
+static int tuner_attach_tda18271(struct ngene_channel *chan)
+{
+	struct i2c_adapter *i2c;
+	struct dvb_frontend *fe;
+
+	i2c = &chan->dev->channel[0].i2c_adapter;
+	if (chan->fe->ops.i2c_gate_ctrl)
+		chan->fe->ops.i2c_gate_ctrl(chan->fe, 1);
+	fe = dvb_attach(tda18271c2dd_attach, chan->fe, i2c, 0x60);
+	if (chan->fe->ops.i2c_gate_ctrl)
+		chan->fe->ops.i2c_gate_ctrl(chan->fe, 0);
+	if (!fe) {
+		printk(KERN_ERR "No TDA18271 found!\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int tuner_attach_probe(struct ngene_channel *chan)
+{
+	if (chan->demod_type == 0)
+		return tuner_attach_stv6110(chan);
+	if (chan->demod_type == 1)
+		return tuner_attach_tda18271(chan);
+	return -EINVAL;
+}
+
 static int demod_attach_stv0900(struct ngene_channel *chan)
 {
 	struct i2c_adapter *i2c;
@@ -130,6 +175,60 @@ static void cineS2_tuner_i2c_lock(struct dvb_frontend *fe, int lock)
 		up(&chan->dev->pll_mutex);
 }
 
+static int i2c_read(struct i2c_adapter *adapter, u8 adr, u8 *val)
+{
+	struct i2c_msg msgs[1] = {{.addr = adr,  .flags = I2C_M_RD,
+				   .buf  = val,  .len   = 1 } };
+	return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1;
+}
+
+static int i2c_read_reg16(struct i2c_adapter *adapter, u8 adr,
+			  u16 reg, u8 *val)
+{
+	u8 msg[2] = {reg>>8, reg&0xff};
+	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
+				   .buf  = msg, .len   = 2},
+				  {.addr = adr, .flags = I2C_M_RD,
+				   .buf  = val, .len   = 1} };
+	return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1;
+}
+
+static int port_has_stv0900(struct i2c_adapter *i2c, int port)
+{
+	u8 val;
+	if (i2c_read_reg16(i2c, 0x68+port/2, 0xf100, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int port_has_drxk(struct i2c_adapter *i2c, int port)
+{
+	u8 val;
+
+	if (i2c_read(i2c, 0x29+port, &val) < 0)
+		return 0;
+	return 1;
+}
+
+static int demod_attach_drxk(struct ngene_channel *chan,
+			     struct i2c_adapter *i2c)
+{
+	struct drxk_config config;
+
+	memset(&config, 0, sizeof(config));
+	config.adr = 0x29 + (chan->number ^ 2);
+
+	chan->fe = dvb_attach(drxk_attach, &config, i2c, &chan->fe2);
+	if (!chan->fe) {
+		printk(KERN_ERR "No DRXK found!\n");
+		return -ENODEV;
+	}
+	chan->fe->sec_priv = chan;
+	chan->gate_ctrl = chan->fe->ops.i2c_gate_ctrl;
+	chan->fe->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+	return 0;
+}
+
 static int cineS2_probe(struct ngene_channel *chan)
 {
 	struct i2c_adapter *i2c;
@@ -144,43 +243,42 @@ static int cineS2_probe(struct ngene_channel *chan)
 	else
 		i2c = &chan->dev->channel[1].i2c_adapter;
 
-	fe_conf = chan->dev->card_info->fe_config[chan->number];
-	i2c_msg.addr = fe_conf->address;
-
-	/* probe demod */
-	i2c_msg.len = 2;
-	buf[0] = 0xf1;
-	buf[1] = 0x00;
-	rc = i2c_transfer(i2c, &i2c_msg, 1);
-	if (rc != 1)
-		return -ENODEV;
-
-	/* demod found, attach it */
-	rc = demod_attach_stv0900(chan);
-	if (rc < 0 || chan->number < 2)
-		return rc;
-
-	/* demod #2: reprogram outputs DPN1 & DPN2 */
-	i2c_msg.len = 3;
-	buf[0] = 0xf1;
-	switch (chan->number) {
-	case 2:
-		buf[1] = 0x5c;
-		buf[2] = 0xc2;
-		break;
-	case 3:
-		buf[1] = 0x61;
-		buf[2] = 0xcc;
-		break;
-	default:
+	if (port_has_stv0900(i2c, chan->number)) {
+		chan->demod_type = 0;
+		fe_conf = chan->dev->card_info->fe_config[chan->number];
+		/* demod found, attach it */
+		rc = demod_attach_stv0900(chan);
+		if (rc < 0 || chan->number < 2)
+			return rc;
+
+		/* demod #2: reprogram outputs DPN1 & DPN2 */
+		i2c_msg.addr = fe_conf->address;
+		i2c_msg.len = 3;
+		buf[0] = 0xf1;
+		switch (chan->number) {
+		case 2:
+			buf[1] = 0x5c;
+			buf[2] = 0xc2;
+			break;
+		case 3:
+			buf[1] = 0x61;
+			buf[2] = 0xcc;
+			break;
+		default:
+			return -ENODEV;
+		}
+		rc = i2c_transfer(i2c, &i2c_msg, 1);
+		if (rc != 1) {
+			printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
+			return -EIO;
+		}
+	} else if (port_has_drxk(i2c, chan->number^2)) {
+		chan->demod_type = 1;
+		demod_attach_drxk(chan, i2c);
+	} else {
+		printk(KERN_ERR "No demod found on chan %d\n", chan->number);
 		return -ENODEV;
 	}
-	rc = i2c_transfer(i2c, &i2c_msg, 1);
-	if (rc != 1) {
-		printk(KERN_ERR DEVICE_NAME ": could not setup DPNx\n");
-		return -EIO;
-	}
-
 	return 0;
 }
 
@@ -306,7 +404,7 @@ static struct ngene_info ngene_info_satixS2v2 = {
 	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
 			   NGENE_IO_TSOUT},
 	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110},
+	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
 	.fe_config	= {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
 	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
 	.lnb		= {0x0a, 0x08, 0x0b, 0x09},
@@ -321,7 +419,7 @@ static struct ngene_info ngene_info_cineS2v5 = {
 	.io_type	= {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
 			   NGENE_IO_TSOUT},
 	.demod_attach	= {demod_attach_stv0900, demod_attach_stv0900, cineS2_probe, cineS2_probe},
-	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110},
+	.tuner_attach	= {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_probe, tuner_attach_probe},
 	.fe_config	= {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
 	.tuner_config	= {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
 	.lnb		= {0x0a, 0x08, 0x0b, 0x09},
@@ -331,13 +429,13 @@ static struct ngene_info ngene_info_cineS2v5 = {
 };
 
 
-static struct ngene_info ngene_info_duoFlexS2 = {
+static struct ngene_info ngene_info_duoFlex = {
 	.type           = NGENE_SIDEWINDER,
-	.name           = "Digital Devices DuoFlex S2 miniPCIe",
+	.name           = "Digital Devices DuoFlex PCIe or miniPCIe",
 	.io_type        = {NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN, NGENE_IO_TSIN,
 			   NGENE_IO_TSOUT},
 	.demod_attach   = {cineS2_probe, cineS2_probe, cineS2_probe, cineS2_probe},
-	.tuner_attach   = {tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110, tuner_attach_stv6110},
+	.tuner_attach   = {tuner_attach_probe, tuner_attach_probe, tuner_attach_probe, tuner_attach_probe},
 	.fe_config      = {&fe_cineS2, &fe_cineS2, &fe_cineS2_2, &fe_cineS2_2},
 	.tuner_config   = {&tuner_cineS2_0, &tuner_cineS2_1, &tuner_cineS2_0, &tuner_cineS2_1},
 	.lnb            = {0x0a, 0x08, 0x0b, 0x09},
@@ -385,8 +483,8 @@ static const struct pci_device_id ngene_id_tbl[] __devinitdata = {
 	NGENE_ID(0x18c3, 0xdb01, ngene_info_satixS2),
 	NGENE_ID(0x18c3, 0xdb02, ngene_info_satixS2v2),
 	NGENE_ID(0x18c3, 0xdd00, ngene_info_cineS2v5),
-	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlexS2),
-	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlexS2),
+	NGENE_ID(0x18c3, 0xdd10, ngene_info_duoFlex),
+	NGENE_ID(0x18c3, 0xdd20, ngene_info_duoFlex),
 	NGENE_ID(0x1461, 0x062e, ngene_info_m780),
 	{0}
 };
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 6927c726ce3..f129a9303f8 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -41,7 +41,7 @@
 
 #include "ngene.h"
 
-static int one_adapter = 1;
+static int one_adapter;
 module_param(one_adapter, int, 0444);
 MODULE_PARM_DESC(one_adapter, "Use only one adapter.");
 
@@ -461,7 +461,7 @@ static u8 TSFeatureDecoderSetup[8 * 5] = {
 	0x42, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,
 	0x40, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* DRXH */
 	0x71, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* DRXHser */
-	0x72, 0x06, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* S2ser */
+	0x72, 0x00, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00,	/* S2ser */
 	0x40, 0x07, 0x00, 0x02, 0x02, 0xbc, 0x00, 0x00, /* LGDT3303 */
 };
 
@@ -507,7 +507,7 @@ void FillTSBuffer(void *Buffer, int Length, u32 Flags)
 {
 	u32 *ptr = Buffer;
 
-	memset(Buffer, 0xff, Length);
+	memset(Buffer, TS_FILLER, Length);
 	while (Length > 0) {
 		if (Flags & DF_SWAP32)
 			*ptr = 0x471FFF10;
@@ -1443,6 +1443,9 @@ static void release_channel(struct ngene_channel *chan)
 		chan->ci_dev = NULL;
 	}
 
+	if (chan->fe2)
+		dvb_unregister_frontend(chan->fe2);
+
 	if (chan->fe) {
 		dvb_unregister_frontend(chan->fe);
 		dvb_frontend_detach(chan->fe);
@@ -1534,6 +1537,14 @@ static int init_channel(struct ngene_channel *chan)
 			goto err;
 		chan->has_demux = true;
 	}
+	if (chan->fe2) {
+		if (dvb_register_frontend(adapter, chan->fe2) < 0)
+			goto err;
+		chan->fe2->tuner_priv = chan->fe->tuner_priv;
+		memcpy(&chan->fe2->ops.tuner_ops,
+		       &chan->fe->ops.tuner_ops,
+		       sizeof(struct dvb_tuner_ops));
+	}
 
 	if (chan->has_demux) {
 		ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
@@ -1571,11 +1582,18 @@ static int init_channels(struct ngene *dev)
 	return 0;
 }
 
+static struct cxd2099_cfg cxd_cfg = {
+	.bitrate = 62000,
+	.adr = 0x40,
+	.polarity = 0,
+	.clock_mode = 0,
+};
+
 static void cxd_attach(struct ngene *dev)
 {
 	struct ngene_ci *ci = &dev->ci;
 
-	ci->en = cxd2099_attach(0x40, dev, &dev->channel[0].i2c_adapter);
+	ci->en = cxd2099_attach(&cxd_cfg, dev, &dev->channel[0].i2c_adapter);
 	ci->dev = dev;
 	return;
 }
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 0b494323316..fcb16a615aa 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -118,6 +118,16 @@ static void swap_buffer(u32 *p, u32 len)
 	}
 }
 
+/* start of filler packet */
+static u8 fill_ts[] = { 0x47, 0x1f, 0xff, 0x10, TS_FILLER };
+
+/* #define DEBUG_CI_XFER */
+#ifdef DEBUG_CI_XFER
+static u32 ok;
+static u32 overflow;
+static u32 stripped;
+#endif
+
 void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 {
 	struct ngene_channel *chan = priv;
@@ -126,21 +136,41 @@ void *tsin_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 
 	if (flags & DF_SWAP32)
 		swap_buffer(buf, len);
+
 	if (dev->ci.en && chan->number == 2) {
-		if (dvb_ringbuffer_free(&dev->tsin_rbuf) > len) {
-			dvb_ringbuffer_write(&dev->tsin_rbuf, buf, len);
-			wake_up_interruptible(&dev->tsin_rbuf.queue);
+		while (len >= 188) {
+			if (memcmp(buf, fill_ts, sizeof fill_ts) != 0) {
+				if (dvb_ringbuffer_free(&dev->tsin_rbuf) >= 188) {
+					dvb_ringbuffer_write(&dev->tsin_rbuf, buf, 188);
+					wake_up(&dev->tsin_rbuf.queue);
+#ifdef DEBUG_CI_XFER
+					ok++;
+#endif
+				}
+#ifdef DEBUG_CI_XFER
+				else
+					overflow++;
+#endif
+			}
+#ifdef DEBUG_CI_XFER
+			else
+				stripped++;
+
+			if (ok % 100 == 0 && overflow)
+				printk(KERN_WARNING "%s: ok %u overflow %u dropped %u\n", __func__, ok, overflow, stripped);
+#endif
+			buf += 188;
+			len -= 188;
 		}
-		return 0;
+		return NULL;
 	}
-	if (chan->users > 0) {
+
+	if (chan->users > 0)
 		dvb_dmx_swfilter(&chan->demux, buf, len);
-	}
+
 	return NULL;
 }
 
-u8 fill_ts[188] = { 0x47, 0x1f, 0xff, 0x10 };
-
 void *tsout_exchange(void *priv, void *buf, u32 len, u32 clock, u32 flags)
 {
 	struct ngene_channel *chan = priv;
diff --git a/drivers/media/dvb/ngene/ngene.h b/drivers/media/dvb/ngene/ngene.h
index 40fce9e3ae6..5443dc0caea 100644
--- a/drivers/media/dvb/ngene/ngene.h
+++ b/drivers/media/dvb/ngene/ngene.h
@@ -641,8 +641,11 @@ struct ngene_channel {
 	int                   mode;
 	bool                  has_adapter;
 	bool                  has_demux;
+	int                   demod_type;
+	int (*gate_ctrl)(struct dvb_frontend *, int);
 
 	struct dvb_frontend  *fe;
+	struct dvb_frontend  *fe2;
 	struct dmxdev         dmxdev;
 	struct dvb_demux      demux;
 	struct dvb_net        dvbnet;
@@ -786,6 +789,8 @@ struct ngene {
 	u8                    uart_rbuf[UART_RBUF_LEN];
 	int                   uart_rp, uart_wp;
 
+#define TS_FILLER  0x6f
+
 	u8                   *tsout_buf;
 #define TSOUT_BUF_SIZE (512*188*8)
 	struct dvb_ringbuffer tsout_rbuf;
@@ -852,7 +857,7 @@ struct ngene_info {
 };
 
 #ifdef NGENE_V4L
-struct ngene_format{
+struct ngene_format {
 	char *name;
 	int   fourcc;          /* video4linux 2      */
 	int   btformat;        /* BT848_COLOR_FMT_*  */
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 78765ed2806..7331e8450d1 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1147,7 +1147,7 @@ static int smscore_validate_client(struct smscore_device_t *coredev,
 
 	if (!client) {
 		sms_err("bad parameter.");
-		return -EFAULT;
+		return -EINVAL;
 	}
 	registered_client = smscore_find_client(coredev, data_type, id);
 	if (registered_client == client)
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index 8ecadecaa9d..c592ae09039 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -22,7 +22,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef __SMS_CORE_API_H__
 #define __SMS_CORE_API_H__
 
-#include <linux/version.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/mm.h>
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 3d8cc425fa6..25e58cbf35f 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -102,10 +102,7 @@
 /*
  * Version Information
  */
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
-
-#define DRIVER_VERSION "v0.46"
-#define RADIO_VERSION KERNEL_VERSION(0, 4, 6)
+#define DRIVER_VERSION "0.4.7"
 
 #define DRIVER_AUTHOR "Markus Demleitner <msdemlei@tucana.harvard.edu>"
 #define DRIVER_DESC "D-Link DSB-R100 USB FM radio driver"
@@ -335,7 +332,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "dsbr100", sizeof(v->driver));
 	strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card));
 	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -647,3 +643,4 @@ module_exit (dsbr100_exit);
 MODULE_AUTHOR( DRIVER_AUTHOR );
 MODULE_DESCRIPTION( DRIVER_DESC );
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 4ce10dbeadd..1c3f8440a55 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -33,7 +33,6 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/delay.h>	/* msleep			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -41,6 +40,7 @@
 MODULE_AUTHOR("M.Kirkwood");
 MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_RTRACK_PORT
 #define CONFIG_RADIO_RTRACK_PORT -1
@@ -53,8 +53,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20f or 0x30f)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct rtrack
 {
 	struct v4l2_device v4l2_dev;
@@ -223,7 +221,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-aimslab", sizeof(v->driver));
 	strlcpy(v->card, "RadioTrack", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index dd8a6ab0d43..eed7b084073 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -30,7 +30,6 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -38,6 +37,7 @@
 MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
 MODULE_DESCRIPTION("A driver for the Aztech radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
 
@@ -53,8 +53,6 @@ module_param(io, int, 0);
 module_param(radio_nr, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)");
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct aztech
 {
 	struct v4l2_device v4l2_dev;
@@ -188,7 +186,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-aztech", sizeof(v->driver));
 	strlcpy(v->card, "Aztech Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index bc9ad0897c5..16a089fad90 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -30,7 +30,6 @@
  *		Changed API to V4L2
  */
 
-#include <linux/version.h>
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
@@ -46,6 +45,7 @@
 MODULE_AUTHOR("Fred Gleason, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
 MODULE_DESCRIPTION("A driver for the ADS Cadet AM/FM/RDS radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.3.4");
 
 static int io = -1;		/* default to isapnp activation */
 static int radio_nr = -1;
@@ -54,8 +54,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of Cadet card (0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e)");
 module_param(radio_nr, int, 0);
 
-#define CADET_VERSION KERNEL_VERSION(0, 3, 3)
-
 #define RDS_BUFFER 256
 #define RDS_RX_FLAG 1
 #define MBS_RX_FLAG 2
@@ -361,7 +359,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "ADS Cadet", sizeof(v->driver));
 	strlcpy(v->card, "ADS Cadet", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = CADET_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO |
 			  V4L2_CAP_READWRITE | V4L2_CAP_RDS_CAPTURE;
 	return 0;
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 259936422e4..edadc8449a3 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -21,21 +21,19 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/mutex.h>
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 3)
-
 /*
  * Module info.
  */
 
-MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
+MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
 MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.4");
 
 /*
  * Module params.
@@ -387,7 +385,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-gemtek", sizeof(v->driver));
 	strlcpy(v->card, "GemTek", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index e83e8400302..f872a54cf3d 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -40,15 +40,18 @@
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/videodev2.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
+#define DRIVER_VERSION	"0.7.8"
+
+
 MODULE_AUTHOR("Dimitromanolakis Apostolos, apdim@grecian.net");
 MODULE_DESCRIPTION("Radio driver for the Guillemot Maxi Radio FM2000 radio.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
 static int radio_nr = -1;
 module_param(radio_nr, int, 0);
@@ -58,10 +61,6 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "activates debug info");
 
-#define DRIVER_VERSION	"0.77"
-
-#define RADIO_VERSION KERNEL_VERSION(0, 7, 7)
-
 #define dprintk(dev, num, fmt, arg...) \
 	v4l2_dbg(num, debug, &dev->v4l2_dev, fmt, ## arg)
 
@@ -195,7 +194,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-maxiradio", sizeof(v->driver));
 	strlcpy(v->card, "Maxi Radio FM2000 radio", sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(dev->pdev));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index b3a635b9582..1742bd8110b 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -63,18 +63,17 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
-#include <linux/version.h>	/* for KERNEL_VERSION MACRO */
 #include <linux/mutex.h>
 
 /* driver and module definitions */
 #define DRIVER_AUTHOR "Alexey Klimov <klimov.linux@gmail.com>"
 #define DRIVER_DESC "AverMedia MR 800 USB FM radio driver"
-#define DRIVER_VERSION "0.11"
-#define RADIO_VERSION KERNEL_VERSION(0, 1, 1)
+#define DRIVER_VERSION "0.1.2"
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
 #define USB_AMRADIO_VENDOR 0x07ca
 #define USB_AMRADIO_PRODUCT 0xb800
@@ -301,7 +300,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-mr800", sizeof(v->driver));
 	strlcpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card));
 	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index 8d6ea591bd1..3628be617ee 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -15,7 +15,6 @@
 #include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -23,6 +22,7 @@
 MODULE_AUTHOR("Ben Pfaff");
 MODULE_DESCRIPTION("A driver for the RadioTrack II radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_RTRACK2_PORT
 #define CONFIG_RADIO_RTRACK2_PORT -1
@@ -35,8 +35,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20c or 0x30c)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct rtrack2
 {
 	struct v4l2_device v4l2_dev;
@@ -121,7 +119,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-rtrack2", sizeof(v->driver));
 	strlcpy(v->card, "RadioTrack II", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index b5a5f89e238..22c5743bf9d 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -16,7 +16,6 @@
  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>	/* __setup			*/
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
@@ -32,6 +31,7 @@
 MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
 MODULE_DESCRIPTION("A driver for the SF16-FMI and SF16-FMP radio.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 static int io = -1;
 static int radio_nr = -1;
@@ -40,8 +40,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the SF16-FMI or SF16-FMP card (0x284 or 0x384)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct fmi
 {
 	struct v4l2_device v4l2_dev;
@@ -134,7 +132,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
 	strlcpy(v->card, "SF16-FMx radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 87bad7678d9..2dd485996ba 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -1,441 +1,209 @@
-/* SF16FMR2 radio driver for Linux radio support
- * heavily based on fmi driver...
- * (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+/* SF16-FMR2 radio driver for Linux
+ * Copyright (c) 2011 Ondrej Zary
  *
- * Notes on the hardware
- *
- *  Frequency control is done digitally -- ie out(port,encodefreq(95.8));
- *  No volume control - only mute/unmute - you have to use line volume
- *
- *  For read stereo/mono you must wait 0.1 sec after set frequency and
- *  card unmuted so I set frequency on unmute
- *  Signal handling seem to work only on autoscanning (not implemented)
- *
- *  Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
+ * Original driver was (c) 2000-2002 Ziglio Frediano, freddy77@angelfire.com
+ * but almost nothing remained here after conversion to generic TEA575x
+ * implementation
  */
 
+#include <linux/delay.h>
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
-#include <linux/delay.h>	/* udelay			*/
-#include <linux/videodev2.h>	/* kernel radio structs		*/
-#include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
+#include <sound/tea575x-tuner.h>
 
-MODULE_AUTHOR("Ziglio Frediano, freddy77@angelfire.com");
-MODULE_DESCRIPTION("A driver for the SF16FMR2 radio.");
+MODULE_AUTHOR("Ondrej Zary");
+MODULE_DESCRIPTION("MediaForte SF16-FMR2 FM radio card driver");
 MODULE_LICENSE("GPL");
 
-static int io = 0x384;
-static int radio_nr = -1;
-
-module_param(io, int, 0);
-MODULE_PARM_DESC(io, "I/O address of the SF16FMR2 card (should be 0x384, if do not work try 0x284)");
-module_param(radio_nr, int, 0);
-
-#define RADIO_VERSION KERNEL_VERSION(0,0,2)
-
-#define AUD_VOL_INDEX 1
-
-#undef DEBUG
-//#define DEBUG 1
-
-#ifdef DEBUG
-# define  debug_print(s) printk s
-#else
-# define  debug_print(s)
-#endif
-
-/* this should be static vars for module size */
-struct fmr2
-{
-	struct v4l2_device v4l2_dev;
-	struct video_device vdev;
-	struct mutex lock;
+struct fmr2 {
 	int io;
-	int curvol; /* 0-15 */
-	int mute;
-	int stereo; /* card is producing stereo audio */
-	unsigned long curfreq; /* freq in kHz */
-	int card_type;
+	struct snd_tea575x tea;
+	struct v4l2_ctrl *volume;
+	struct v4l2_ctrl *balance;
 };
 
+/* the port is hardwired so no need to support multiple cards */
+#define FMR2_PORT	0x384
 static struct fmr2 fmr2_card;
 
-/* hw precision is 12.5 kHz
- * It is only useful to give freq in interval of 200 (=0.0125Mhz),
- * other bits will be truncated
- */
-#define RSF16_ENCODE(x)	((x) / 200 + 856)
-#define RSF16_MINFREQ (87 * 16000)
-#define RSF16_MAXFREQ (108 * 16000)
-
-static inline void wait(int n, int io)
-{
-	for (; n; --n)
-		inb(io);
-}
-
-static void outbits(int bits, unsigned int data, int nWait, int io)
-{
-	int bit;
-
-	for (; --bits >= 0;) {
-		bit = (data >> bits) & 1;
-		outb(bit, io);
-		wait(nWait, io);
-		outb(bit | 2, io);
-		wait(nWait, io);
-		outb(bit, io);
-		wait(nWait, io);
-	}
-}
-
-static inline void fmr2_mute(int io)
-{
-	outb(0x00, io);
-	wait(4, io);
-}
-
-static inline void fmr2_unmute(int io)
-{
-	outb(0x04, io);
-	wait(4, io);
-}
-
-static inline int fmr2_stereo_mode(int io)
-{
-	int n = inb(io);
-
-	outb(6, io);
-	inb(io);
-	n = ((n >> 3) & 1) ^ 1;
-	debug_print((KERN_DEBUG "stereo: %d\n", n));
-	return n;
-}
-
-static int fmr2_product_info(struct fmr2 *dev)
-{
-	int n = inb(dev->io);
-
-	n &= 0xC1;
-	if (n == 0) {
-		/* this should support volume set */
-		dev->card_type = 12;
-		return 0;
-	}
-	/* not volume (mine is 11) */
-	dev->card_type = (n == 128) ? 11 : 0;
-	return n;
-}
+/* TEA575x tuner pins */
+#define STR_DATA	(1 << 0)
+#define STR_CLK		(1 << 1)
+#define STR_WREN	(1 << 2)
+#define STR_MOST	(1 << 3)
+/* PT2254A/TC9154A volume control pins */
+#define PT_ST		(1 << 4)
+#define PT_CK		(1 << 5)
+#define PT_DATA		(1 << 6)
+/* volume control presence pin */
+#define FMR2_HASVOL	(1 << 7)
 
-static inline int fmr2_getsigstr(struct fmr2 *dev)
+static void fmr2_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
 {
-	/* !!! works only if scanning freq */
-	int res = 0xffff;
-
-	outb(5, dev->io);
-	wait(4, dev->io);
-	if (!(inb(dev->io) & 1))
-		res = 0;
-	debug_print((KERN_DEBUG "signal: %d\n", res));
-	return res;
-}
-
-/* set frequency and unmute card */
-static int fmr2_setfreq(struct fmr2 *dev)
-{
-	unsigned long freq = dev->curfreq;
-
-	fmr2_mute(dev->io);
-
-	/* 0x42 for mono output
-	 * 0x102 forward scanning
-	 * 0x182 scansione avanti
-	 */
-	outbits(9, 0x2, 3, dev->io);
-	outbits(16, RSF16_ENCODE(freq), 2, dev->io);
-
-	fmr2_unmute(dev->io);
+	struct fmr2 *fmr2 = tea->private_data;
+	u8 bits = 0;
 
-	/* wait 0.11 sec */
-	msleep(110);
+	bits |= (pins & TEA575X_DATA) ? STR_DATA : 0;
+	bits |= (pins & TEA575X_CLK)  ? STR_CLK  : 0;
+	/* WRITE_ENABLE is inverted, DATA must be high during read */
+	bits |= (pins & TEA575X_WREN) ? 0 : STR_WREN | STR_DATA;
 
-	/* NOTE if mute this stop radio
-	   you must set freq on unmute */
-	dev->stereo = fmr2_stereo_mode(dev->io);
-	return 0;
-}
-
-/* !!! not tested, in my card this doesn't work !!! */
-static int fmr2_setvolume(struct fmr2 *dev)
-{
-	int vol[16] = { 0x021, 0x084, 0x090, 0x104,
-			0x110, 0x204, 0x210, 0x402,
-			0x404, 0x408, 0x410, 0x801,
-			0x802, 0x804, 0x808, 0x810 };
-	int i, a;
-	int n = vol[dev->curvol & 0x0f];
-
-	if (dev->card_type != 11)
-		return 1;
-
-	for (i = 12; --i >= 0; ) {
-		a = ((n >> i) & 1) << 6; /* if (a==0) a = 0; else a = 0x40; */
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-		outb(a | 0x24, dev->io);
-		wait(4, dev->io);
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-	}
-	for (i = 6; --i >= 0; ) {
-		a = ((0x18 >> i) & 1) << 6;
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-		outb(a | 0x24, dev->io);
-		wait(4, dev->io);
-		outb(a | 4, dev->io);
-		wait(4, dev->io);
-	}
-	wait(4, dev->io);
-	outb(0x14, dev->io);
-	return 0;
+	outb(bits, fmr2->io);
 }
 
-static int vidioc_querycap(struct file *file, void  *priv,
-					struct v4l2_capability *v)
+static u8 fmr2_tea575x_get_pins(struct snd_tea575x *tea)
 {
-	strlcpy(v->driver, "radio-sf16fmr2", sizeof(v->driver));
-	strlcpy(v->card, "SF16-FMR2 radio", sizeof(v->card));
-	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
-	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
-	return 0;
-}
-
-static int vidioc_g_tuner(struct file *file, void *priv,
-					struct v4l2_tuner *v)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	if (v->index > 0)
-		return -EINVAL;
+	struct fmr2 *fmr2 = tea->private_data;
+	u8 bits = inb(fmr2->io);
 
-	strlcpy(v->name, "FM", sizeof(v->name));
-	v->type = V4L2_TUNER_RADIO;
-
-	v->rangelow = RSF16_MINFREQ;
-	v->rangehigh = RSF16_MAXFREQ;
-	v->rxsubchans = fmr2->stereo ? V4L2_TUNER_SUB_STEREO :
-					V4L2_TUNER_SUB_MONO;
-	v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
-	v->audmode = V4L2_TUNER_MODE_STEREO;
-	mutex_lock(&fmr2->lock);
-	v->signal = fmr2_getsigstr(fmr2);
-	mutex_unlock(&fmr2->lock);
-	return 0;
+	return  (bits & STR_DATA) ? TEA575X_DATA : 0 |
+		(bits & STR_MOST) ? TEA575X_MOST : 0;
 }
 
-static int vidioc_s_tuner(struct file *file, void *priv,
-					struct v4l2_tuner *v)
+static void fmr2_tea575x_set_direction(struct snd_tea575x *tea, bool output)
 {
-	return v->index ? -EINVAL : 0;
 }
 
-static int vidioc_s_frequency(struct file *file, void *priv,
-					struct v4l2_frequency *f)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
+static struct snd_tea575x_ops fmr2_tea_ops = {
+	.set_pins = fmr2_tea575x_set_pins,
+	.get_pins = fmr2_tea575x_get_pins,
+	.set_direction = fmr2_tea575x_set_direction,
+};
 
-	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
-		return -EINVAL;
-	if (f->frequency < RSF16_MINFREQ ||
-			f->frequency > RSF16_MAXFREQ)
-		return -EINVAL;
-	/* rounding in steps of 200 to match the freq
-	   that will be used */
-	fmr2->curfreq = (f->frequency / 200) * 200;
-
-	/* set card freq (if not muted) */
-	if (fmr2->curvol && !fmr2->mute) {
-		mutex_lock(&fmr2->lock);
-		fmr2_setfreq(fmr2);
-		mutex_unlock(&fmr2->lock);
+/* TC9154A/PT2254A volume control */
+
+/* 18-bit shift register bit definitions */
+#define TC9154A_ATT_MAJ_0DB	(1 << 0)
+#define TC9154A_ATT_MAJ_10DB	(1 << 1)
+#define TC9154A_ATT_MAJ_20DB	(1 << 2)
+#define TC9154A_ATT_MAJ_30DB	(1 << 3)
+#define TC9154A_ATT_MAJ_40DB	(1 << 4)
+#define TC9154A_ATT_MAJ_50DB	(1 << 5)
+#define TC9154A_ATT_MAJ_60DB	(1 << 6)
+
+#define TC9154A_ATT_MIN_0DB	(1 << 7)
+#define TC9154A_ATT_MIN_2DB	(1 << 8)
+#define TC9154A_ATT_MIN_4DB	(1 << 9)
+#define TC9154A_ATT_MIN_6DB	(1 << 10)
+#define TC9154A_ATT_MIN_8DB	(1 << 11)
+/* bit 12 is ignored */
+#define TC9154A_CHANNEL_LEFT	(1 << 13)
+#define TC9154A_CHANNEL_RIGHT	(1 << 14)
+/* bits 15, 16, 17 must be 0 */
+
+#define	TC9154A_ATT_MAJ(x)	(1 << x)
+#define TC9154A_ATT_MIN(x)	(1 << (7 + x))
+
+static void tc9154a_set_pins(struct fmr2 *fmr2, u8 pins)
+{
+	if (!fmr2->tea.mute)
+		pins |= STR_WREN;
+
+	outb(pins, fmr2->io);
+}
+
+static void tc9154a_set_attenuation(struct fmr2 *fmr2, int att, u32 channel)
+{
+	int i;
+	u32 reg;
+	u8 bit;
+
+	reg = TC9154A_ATT_MAJ(att / 10) | TC9154A_ATT_MIN((att % 10) / 2);
+	reg |= channel;
+	/* write 18-bit shift register, LSB first */
+	for (i = 0; i < 18; i++) {
+		bit = reg & (1 << i) ? PT_DATA : 0;
+		tc9154a_set_pins(fmr2, bit);
+		udelay(5);
+		tc9154a_set_pins(fmr2, bit | PT_CK);
+		udelay(5);
+		tc9154a_set_pins(fmr2, bit);
 	}
-	return 0;
-}
-
-static int vidioc_g_frequency(struct file *file, void *priv,
-					struct v4l2_frequency *f)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	if (f->tuner != 0)
-		return -EINVAL;
-	f->type = V4L2_TUNER_RADIO;
-	f->frequency = fmr2->curfreq;
-	return 0;
-}
 
-static int vidioc_queryctrl(struct file *file, void *priv,
-					struct v4l2_queryctrl *qc)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
-	case V4L2_CID_AUDIO_VOLUME:
-		/* Only card_type == 11 implements volume */
-		if (fmr2->card_type == 11)
-			return v4l2_ctrl_query_fill(qc, 0, 15, 1, 0);
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	}
-	return -EINVAL;
+	/* latch register data */
+	udelay(5);
+	tc9154a_set_pins(fmr2, PT_ST);
+	udelay(5);
+	tc9154a_set_pins(fmr2, 0);
 }
 
-static int vidioc_g_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
+static int fmr2_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct fmr2 *fmr2 = video_drvdata(file);
+	struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler);
+	struct fmr2 *fmr2 = tea->private_data;
+	int volume, balance, left, right;
 
 	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = fmr2->mute;
-		return 0;
 	case V4L2_CID_AUDIO_VOLUME:
-		ctrl->value = fmr2->curvol;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
-{
-	struct fmr2 *fmr2 = video_drvdata(file);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		fmr2->mute = ctrl->value;
+		volume = ctrl->val;
+		balance = fmr2->balance->cur.val;
 		break;
-	case V4L2_CID_AUDIO_VOLUME:
-		fmr2->curvol = ctrl->value;
+	case V4L2_CID_AUDIO_BALANCE:
+		balance = ctrl->val;
+		volume = fmr2->volume->cur.val;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-#ifdef DEBUG
-	if (fmr2->curvol && !fmr2->mute)
-		printk(KERN_DEBUG "unmute\n");
-	else
-		printk(KERN_DEBUG "mute\n");
-#endif
-
-	mutex_lock(&fmr2->lock);
-	if (fmr2->curvol && !fmr2->mute) {
-		fmr2_setvolume(fmr2);
-		/* Set frequency and unmute card */
-		fmr2_setfreq(fmr2);
-	} else
-		fmr2_mute(fmr2->io);
-	mutex_unlock(&fmr2->lock);
-	return 0;
-}
-
-static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
+	left = right = volume;
+	if (balance < 0)
+		right = max(0, right + balance);
+	if (balance > 0)
+		left = max(0, left - balance);
 
-static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	return i ? -EINVAL : 0;
-}
+	tc9154a_set_attenuation(fmr2, abs(left - 68), TC9154A_CHANNEL_LEFT);
+	tc9154a_set_attenuation(fmr2, abs(right - 68), TC9154A_CHANNEL_RIGHT);
 
-static int vidioc_g_audio(struct file *file, void *priv,
-					struct v4l2_audio *a)
-{
-	a->index = 0;
-	strlcpy(a->name, "Radio", sizeof(a->name));
-	a->capability = V4L2_AUDCAP_STEREO;
 	return 0;
 }
 
-static int vidioc_s_audio(struct file *file, void *priv,
-					struct v4l2_audio *a)
+static const struct v4l2_ctrl_ops fmr2_ctrl_ops = {
+	.s_ctrl = fmr2_s_ctrl,
+};
+
+static int fmr2_tea_ext_init(struct snd_tea575x *tea)
 {
-	return a->index ? -EINVAL : 0;
-}
+	struct fmr2 *fmr2 = tea->private_data;
 
-static const struct v4l2_file_operations fmr2_fops = {
-	.owner          = THIS_MODULE,
-	.unlocked_ioctl = video_ioctl2,
-};
+	if (inb(fmr2->io) & FMR2_HASVOL) {
+		fmr2->volume = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 0, 68, 2, 56);
+		fmr2->balance = v4l2_ctrl_new_std(&tea->ctrl_handler, &fmr2_ctrl_ops, V4L2_CID_AUDIO_BALANCE, -68, 68, 2, 0);
+		if (tea->ctrl_handler.error) {
+			printk(KERN_ERR "radio-sf16fmr2: can't initialize contrls\n");
+			return tea->ctrl_handler.error;
+		}
+	}
 
-static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
-	.vidioc_querycap    = vidioc_querycap,
-	.vidioc_g_tuner     = vidioc_g_tuner,
-	.vidioc_s_tuner     = vidioc_s_tuner,
-	.vidioc_g_audio     = vidioc_g_audio,
-	.vidioc_s_audio     = vidioc_s_audio,
-	.vidioc_g_input     = vidioc_g_input,
-	.vidioc_s_input     = vidioc_s_input,
-	.vidioc_g_frequency = vidioc_g_frequency,
-	.vidioc_s_frequency = vidioc_s_frequency,
-	.vidioc_queryctrl   = vidioc_queryctrl,
-	.vidioc_g_ctrl      = vidioc_g_ctrl,
-	.vidioc_s_ctrl      = vidioc_s_ctrl,
-};
+	return 0;
+}
 
 static int __init fmr2_init(void)
 {
 	struct fmr2 *fmr2 = &fmr2_card;
-	struct v4l2_device *v4l2_dev = &fmr2->v4l2_dev;
-	int res;
 
-	strlcpy(v4l2_dev->name, "sf16fmr2", sizeof(v4l2_dev->name));
-	fmr2->io = io;
-	fmr2->stereo = 1;
-	mutex_init(&fmr2->lock);
+	fmr2->io = FMR2_PORT;
 
-	if (!request_region(fmr2->io, 2, "sf16fmr2")) {
-		v4l2_err(v4l2_dev, "request_region failed!\n");
+	if (!request_region(fmr2->io, 2, "SF16-FMR2")) {
+		printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io);
 		return -EBUSY;
 	}
 
-	res = v4l2_device_register(NULL, v4l2_dev);
-	if (res < 0) {
-		release_region(fmr2->io, 2);
-		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
-		return res;
-	}
+	fmr2->tea.private_data = fmr2;
+	fmr2->tea.ops = &fmr2_tea_ops;
+	fmr2->tea.ext_init = fmr2_tea_ext_init;
+	strlcpy(fmr2->tea.card, "SF16-FMR2", sizeof(fmr2->tea.card));
+	strcpy(fmr2->tea.bus_info, "ISA");
 
-	strlcpy(fmr2->vdev.name, v4l2_dev->name, sizeof(fmr2->vdev.name));
-	fmr2->vdev.v4l2_dev = v4l2_dev;
-	fmr2->vdev.fops = &fmr2_fops;
-	fmr2->vdev.ioctl_ops = &fmr2_ioctl_ops;
-	fmr2->vdev.release = video_device_release_empty;
-	video_set_drvdata(&fmr2->vdev, fmr2);
-
-	/* mute card - prevents noisy bootups */
-	fmr2_mute(fmr2->io);
-	fmr2_product_info(fmr2);
-
-	if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
+	if (snd_tea575x_init(&fmr2->tea)) {
+		printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
 		release_region(fmr2->io, 2);
-		return -EINVAL;
+		return -ENODEV;
 	}
 
-	v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
-	debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
+	printk(KERN_INFO "radio-sf16fmr2: SF16-FMR2 radio card at 0x%x.\n", fmr2->io);
 	return 0;
 }
 
@@ -443,22 +211,9 @@ static void __exit fmr2_exit(void)
 {
 	struct fmr2 *fmr2 = &fmr2_card;
 
-	video_unregister_device(&fmr2->vdev);
-	v4l2_device_unregister(&fmr2->v4l2_dev);
+	snd_tea575x_exit(&fmr2->tea);
 	release_region(fmr2->io, 2);
 }
 
 module_init(fmr2_init);
 module_exit(fmr2_exit);
-
-#ifndef MODULE
-
-static int __init fmr2_setup_io(char *str)
-{
-	get_option(&str, &io);
-	return 1;
-}
-
-__setup("sf16fmr2=", fmr2_setup_io);
-
-#endif
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 0e71d816c72..95ddcc4845d 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -39,10 +39,8 @@
 #include <linux/i2c.h>			/* I2C				*/
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <linux/version.h>      	/* for KERNEL_VERSION MACRO     */
 
-#define DRIVER_VERSION	"v0.01"
-#define RADIO_VERSION	KERNEL_VERSION(0, 0, 1)
+#define DRIVER_VERSION	"0.0.2"
 
 #define DRIVER_AUTHOR	"Fabio Belavenuto <belavenuto@gmail.com>"
 #define DRIVER_DESC	"A driver for the TEA5764 radio chip for EZX Phones."
@@ -300,7 +298,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->card, dev->name, sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info),
 		 "I2C:%s", dev_name(&dev->dev));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
@@ -595,8 +592,9 @@ static void __exit tea5764_exit(void)
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
-module_param(use_xtal, int, 1);
+module_param(use_xtal, int, 0);
 MODULE_PARM_DESC(use_xtal, "Chip have a xtal connected in board");
 module_param(radio_nr, int, 0);
 MODULE_PARM_DESC(radio_nr, "video4linux device number to use");
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index a3266391705..f2ed9cc3cf3 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -29,7 +29,6 @@
 #include <linux/ioport.h>	/* request_region		*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -37,6 +36,7 @@
 MODULE_AUTHOR("R.OFFERMANNS & others");
 MODULE_DESCRIPTION("A driver for the TerraTec ActiveRadio Standalone radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_TERRATEC_PORT
 #define CONFIG_RADIO_TERRATEC_PORT 0x590
@@ -49,8 +49,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the TerraTec ActiveRadio card (0x590 or 0x591)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 static struct v4l2_queryctrl radio_qctrl[] = {
 	{
 		.id            = V4L2_CID_AUDIO_MUTE,
@@ -205,7 +203,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-terratec", sizeof(v->driver));
 	strlcpy(v->card, "ActiveRadio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
index a185610b376..f17b540d68a 100644
--- a/drivers/media/radio/radio-timb.c
+++ b/drivers/media/radio/radio-timb.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
 #include <linux/io.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
@@ -44,7 +43,6 @@ static int timbradio_vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, DRIVER_NAME, sizeof(v->driver));
 	strlcpy(v->card, "Timberdale Radio", sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info), "platform:"DRIVER_NAME);
-	v->version = KERNEL_VERSION(0, 0, 1);
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
@@ -245,4 +243,5 @@ module_exit(timbradio_exit);
 MODULE_DESCRIPTION("Timberdale Radio driver");
 MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.0.2");
 MODULE_ALIAS("platform:"DRIVER_NAME);
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 22fa9cc28ab..b3f45a019d8 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/videodev2.h>
 #include <linux/io.h>
 #include <media/v4l2-device.h>
@@ -28,6 +27,7 @@
 MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
 MODULE_DESCRIPTION("A driver for the Trust FM Radio card.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
 
@@ -42,8 +42,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct trust {
 	struct v4l2_device v4l2_dev;
 	struct video_device vdev;
@@ -196,7 +194,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "radio-trust", sizeof(v->driver));
 	strlcpy(v->card, "Trust FM Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 8dbbf08f220..398726abc0c 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -31,15 +31,17 @@
 #include <linux/module.h>	/* Modules                        */
 #include <linux/init.h>		/* Initdata                       */
 #include <linux/ioport.h>	/* request_region		  */
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/videodev2.h>	/* kernel radio structs           */
 #include <linux/io.h>		/* outb, outb_p                   */
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
+#define DRIVER_VERSION "0.1.2"
+
 MODULE_AUTHOR("Dr. Henrik Seidel");
 MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
 
 #ifndef CONFIG_RADIO_TYPHOON_PORT
 #define CONFIG_RADIO_TYPHOON_PORT -1
@@ -61,9 +63,7 @@ static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ;
 module_param(mutefreq, ulong, 0);
 MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
 
-#define RADIO_VERSION KERNEL_VERSION(0, 1, 1)
-
-#define BANNER "Typhoon Radio Card driver v0.1.1\n"
+#define BANNER "Typhoon Radio Card driver v" DRIVER_VERSION "\n"
 
 struct typhoon {
 	struct v4l2_device v4l2_dev;
@@ -171,7 +171,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-typhoon", sizeof(v->driver));
 	strlcpy(v->card, "Typhoon Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
index 459f7272d32..46cacf84504 100644
--- a/drivers/media/radio/radio-wl1273.c
+++ b/drivers/media/radio/radio-wl1273.c
@@ -1382,7 +1382,7 @@ static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		ctrl->cur.val = wl1273_fm_get_tx_ctune(radio);
+		ctrl->val = wl1273_fm_get_tx_ctune(radio);
 		break;
 
 	default:
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index af99c5bd88c..f5613b94820 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -35,7 +35,6 @@
 #include <linux/delay.h>	/* udelay, msleep                 */
 #include <linux/videodev2.h>	/* kernel radio structs           */
 #include <linux/mutex.h>
-#include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
 #include <linux/io.h>		/* outb, outb_p                   */
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -43,6 +42,7 @@
 MODULE_AUTHOR("C.van Schaik");
 MODULE_DESCRIPTION("A driver for the Zoltrix Radio Plus.");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
 
 #ifndef CONFIG_RADIO_ZOLTRIX_PORT
 #define CONFIG_RADIO_ZOLTRIX_PORT -1
@@ -55,8 +55,6 @@ module_param(io, int, 0);
 MODULE_PARM_DESC(io, "I/O address of the Zoltrix Radio Plus (0x20c or 0x30c)");
 module_param(radio_nr, int, 0);
 
-#define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
-
 struct zoltrix {
 	struct v4l2_device v4l2_dev;
 	struct video_device vdev;
@@ -228,7 +226,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-zoltrix", sizeof(v->driver));
 	strlcpy(v->card, "Zoltrix Radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->version = RADIO_VERSION;
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c
index a2a67772c42..fd3541b0e91 100644
--- a/drivers/media/radio/si470x/radio-si470x-i2c.c
+++ b/drivers/media/radio/si470x/radio-si470x-i2c.c
@@ -24,10 +24,9 @@
 
 /* driver definitions */
 #define DRIVER_AUTHOR "Joonyoung Shim <jy0922.shim@samsung.com>";
-#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 1)
 #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
 #define DRIVER_DESC "I2C radio driver for Si470x FM Radio Receivers"
-#define DRIVER_VERSION "1.0.1"
+#define DRIVER_VERSION "1.0.2"
 
 /* kernel includes */
 #include <linux/i2c.h>
@@ -248,7 +247,6 @@ int si470x_vidioc_querycap(struct file *file, void *priv,
 {
 	strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver));
 	strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card));
-	capability->version = DRIVER_KERNEL_VERSION;
 	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
 		V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 
diff --git a/drivers/media/radio/si470x/radio-si470x-usb.c b/drivers/media/radio/si470x/radio-si470x-usb.c
index 392e84fe90e..4cf537043f9 100644
--- a/drivers/media/radio/si470x/radio-si470x-usb.c
+++ b/drivers/media/radio/si470x/radio-si470x-usb.c
@@ -29,7 +29,6 @@
 
 /* driver definitions */
 #define DRIVER_AUTHOR "Tobias Lorenz <tobias.lorenz@gmx.net>"
-#define DRIVER_KERNEL_VERSION KERNEL_VERSION(1, 0, 10)
 #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver"
 #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers"
 #define DRIVER_VERSION "1.0.10"
@@ -626,7 +625,6 @@ int si470x_vidioc_querycap(struct file *file, void *priv,
 	strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card));
 	usb_make_path(radio->usbdev, capability->bus_info,
 			sizeof(capability->bus_info));
-	capability->version = DRIVER_KERNEL_VERSION;
 	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
 		V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_RDS_CAPTURE;
 
@@ -699,7 +697,7 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	radio->videodev = video_device_alloc();
 	if (!radio->videodev) {
 		retval = -ENOMEM;
-		goto err_intbuffer;
+		goto err_urb;
 	}
 	memcpy(radio->videodev, &si470x_viddev_template,
 			sizeof(si470x_viddev_template));
@@ -790,6 +788,8 @@ err_all:
 	kfree(radio->buffer);
 err_video:
 	video_device_release(radio->videodev);
+err_urb:
+	usb_free_urb(radio->int_in_urb);
 err_intbuffer:
 	kfree(radio->int_in_buffer);
 err_radio:
diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h
index 68da001b09d..f300a55ed85 100644
--- a/drivers/media/radio/si470x/radio-si470x.h
+++ b/drivers/media/radio/si470x/radio-si470x.h
@@ -32,7 +32,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/input.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/radio/wl128x/fmdrv.h b/drivers/media/radio/wl128x/fmdrv.h
index 1a45a5d847b..d84ad9dad32 100644
--- a/drivers/media/radio/wl128x/fmdrv.h
+++ b/drivers/media/radio/wl128x/fmdrv.h
@@ -28,14 +28,11 @@
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <linux/timer.h>
-#include <linux/version.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 
-#define FM_DRV_VERSION            "0.10"
-/* Should match with FM_DRV_VERSION */
-#define FM_DRV_RADIO_VERSION      KERNEL_VERSION(0, 0, 1)
+#define FM_DRV_VERSION            "0.1.1"
 #define FM_DRV_NAME               "ti_fmdrv"
 #define FM_DRV_CARD_SHORT_NAME    "TI FM Radio"
 #define FM_DRV_CARD_LONG_NAME     "Texas Instruments FM Radio"
diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index 87010724f91..8c0e1927697 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -175,7 +175,6 @@ static int fm_v4l2_vidioc_querycap(struct file *file, void *priv,
 	strlcpy(capability->card, FM_DRV_CARD_SHORT_NAME,
 			sizeof(capability->card));
 	sprintf(capability->bus_info, "UART");
-	capability->version = FM_DRV_RADIO_VERSION;
 	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER |
 		V4L2_CAP_RADIO | V4L2_CAP_MODULATOR |
 		V4L2_CAP_AUDIO | V4L2_CAP_READWRITE |
@@ -191,7 +190,7 @@ static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 
 	switch (ctrl->id) {
 	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
-		ctrl->cur.val = fm_tx_get_tune_cap_val(fmdev);
+		ctrl->val = fm_tx_get_tune_cap_val(fmdev);
 		break;
 	default:
 		fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id);
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 7d4bbc226d0..899f783d92f 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -87,6 +87,17 @@ config IR_RC5_SZ_DECODER
 	   uses an IR protocol that is almost standard RC-5, but not quite,
 	   as it uses an additional bit).
 
+config IR_MCE_KBD_DECODER
+	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+	depends on RC_CORE
+	select BITREVERSE
+	default y
+
+	---help---
+	   Enable this option if you have a Microsoft Remote Keyboard for
+	   Windows Media Center Edition, which you would like to use with
+	   a raw IR receiver in your system.
+
 config IR_LIRC_CODEC
 	tristate "Enable IR to LIRC bridge"
 	depends on RC_CORE
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 52830e5f4ea..f224db027c4 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
 obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
 obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
 obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
+obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
 obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 
 # stand-alone IR receivers/transmitters
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index a43ed6c41bf..2b9c2569d74 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -953,13 +953,13 @@ static void ene_set_idle(struct rc_dev *rdev, bool idle)
 }
 
 /* outside interface: transmit */
-static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n)
+static int ene_transmit(struct rc_dev *rdev, unsigned *buf, unsigned n)
 {
 	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	dev->tx_buffer = buf;
-	dev->tx_len = n / sizeof(int);
+	dev->tx_len = n;
 	dev->tx_pos = 0;
 	dev->tx_reg = 0;
 	dev->tx_done = 0;
diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h
index 337a41d4450..017c209cdf8 100644
--- a/drivers/media/rc/ene_ir.h
+++ b/drivers/media/rc/ene_ir.h
@@ -235,7 +235,7 @@ struct ene_device {
 	bool tx_sample_pulse;			/* current sample is pulse */
 
 	/* TX buffer */
-	int *tx_buffer;				/* input samples buffer*/
+	unsigned *tx_buffer;			/* input samples buffer*/
 	int tx_pos;				/* position in that bufer */
 	int tx_len;				/* current len of tx buffer */
 	int tx_done;				/* done transmitting */
diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 1c5cc65ea1e..e5eeec4da76 100644
--- a/drivers/media/rc/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -103,19 +103,19 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 {
 	struct lirc_codec *lirc;
 	struct rc_dev *dev;
-	int *txbuf; /* buffer with values to transmit */
-	int ret = 0;
+	unsigned int *txbuf; /* buffer with values to transmit */
+	ssize_t ret = 0;
 	size_t count;
 
 	lirc = lirc_get_pdata(file);
 	if (!lirc)
 		return -EFAULT;
 
-	if (n % sizeof(int))
+	if (n < sizeof(unsigned) || n % sizeof(unsigned))
 		return -EINVAL;
 
-	count = n / sizeof(int);
-	if (count > LIRCBUF_SIZE || count % 2 == 0 || n % sizeof(int) != 0)
+	count = n / sizeof(unsigned);
+	if (count > LIRCBUF_SIZE || count % 2 == 0)
 		return -EINVAL;
 
 	txbuf = memdup_user(buf, n);
@@ -129,7 +129,10 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 	}
 
 	if (dev->tx_ir)
-		ret = dev->tx_ir(dev, txbuf, (u32)n);
+		ret = dev->tx_ir(dev, txbuf, count);
+
+	if (ret > 0)
+		ret *= sizeof(unsigned);
 
 out:
 	kfree(txbuf);
diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c
new file mode 100644
index 00000000000..3784ebf80ec
--- /dev/null
+++ b/drivers/media/rc/ir-mce_kbd-decoder.c
@@ -0,0 +1,449 @@
+/* ir-mce_kbd-decoder.c - A decoder for the RC6-ish keyboard/mouse IR protocol
+ * used by the Microsoft Remote Keyboard for Windows Media Center Edition,
+ * referred to by Microsoft's Windows Media Center remote specification docs
+ * as "an internal protocol called MCIR-2".
+ *
+ * Copyright (C) 2011 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include "rc-core-priv.h"
+
+/*
+ * This decoder currently supports:
+ * - MCIR-2 29-bit IR signals used for mouse movement and buttons
+ * - MCIR-2 32-bit IR signals used for standard keyboard keys
+ *
+ * The media keys on the keyboard send RC-6 signals that are inditinguishable
+ * from the keys of the same name on the stock MCE remote, and will be handled
+ * by the standard RC-6 decoder, and be made available to the system via the
+ * input device for the remote, rather than the keyboard/mouse one.
+ */
+
+#define MCIR2_UNIT		333333	/* ns */
+#define MCIR2_HEADER_NBITS	5
+#define MCIR2_MOUSE_NBITS	29
+#define MCIR2_KEYBOARD_NBITS	32
+#define MCIR2_PREFIX_PULSE	(8 * MCIR2_UNIT)
+#define MCIR2_PREFIX_SPACE	(1 * MCIR2_UNIT)
+#define MCIR2_MAX_LEN		(3 * MCIR2_UNIT)
+#define MCIR2_BIT_START		(1 * MCIR2_UNIT)
+#define MCIR2_BIT_END		(1 * MCIR2_UNIT)
+#define MCIR2_BIT_0		(1 * MCIR2_UNIT)
+#define MCIR2_BIT_SET		(2 * MCIR2_UNIT)
+#define MCIR2_MODE_MASK		0xf	/* for the header bits */
+#define MCIR2_KEYBOARD_HEADER	0x4
+#define MCIR2_MOUSE_HEADER	0x1
+#define MCIR2_MASK_KEYS_START	0xe0
+
+enum mce_kbd_mode {
+	MCIR2_MODE_KEYBOARD,
+	MCIR2_MODE_MOUSE,
+	MCIR2_MODE_UNKNOWN,
+};
+
+enum mce_kbd_state {
+	STATE_INACTIVE,
+	STATE_HEADER_BIT_START,
+	STATE_HEADER_BIT_END,
+	STATE_BODY_BIT_START,
+	STATE_BODY_BIT_END,
+	STATE_FINISHED,
+};
+
+static unsigned char kbd_keycodes[256] = {
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_A,
+	KEY_B,		KEY_C,		KEY_D,		KEY_E,		KEY_F,
+	KEY_G,		KEY_H,		KEY_I,		KEY_J,		KEY_K,
+	KEY_L,		KEY_M,		KEY_N,		KEY_O,		KEY_P,
+	KEY_Q,		KEY_R,		KEY_S,		KEY_T,		KEY_U,
+	KEY_V,		KEY_W,		KEY_X,		KEY_Y,		KEY_Z,
+	KEY_1,		KEY_2,		KEY_3,		KEY_4,		KEY_5,
+	KEY_6,		KEY_7,		KEY_8,		KEY_9,		KEY_0,
+	KEY_ENTER,	KEY_ESC,	KEY_BACKSPACE,	KEY_TAB,	KEY_SPACE,
+	KEY_MINUS,	KEY_EQUAL,	KEY_LEFTBRACE,	KEY_RIGHTBRACE,	KEY_BACKSLASH,
+	KEY_RESERVED,	KEY_SEMICOLON,	KEY_APOSTROPHE,	KEY_GRAVE,	KEY_COMMA,
+	KEY_DOT,	KEY_SLASH,	KEY_CAPSLOCK,	KEY_F1,		KEY_F2,
+	KEY_F3,		KEY_F4,		KEY_F5,		KEY_F6,		KEY_F7,
+	KEY_F8,		KEY_F9,		KEY_F10,	KEY_F11,	KEY_F12,
+	KEY_SYSRQ,	KEY_SCROLLLOCK,	KEY_PAUSE,	KEY_INSERT,	KEY_HOME,
+	KEY_PAGEUP,	KEY_DELETE,	KEY_END,	KEY_PAGEDOWN,	KEY_RIGHT,
+	KEY_LEFT,	KEY_DOWN,	KEY_UP,		KEY_NUMLOCK,	KEY_KPSLASH,
+	KEY_KPASTERISK,	KEY_KPMINUS,	KEY_KPPLUS,	KEY_KPENTER,	KEY_KP1,
+	KEY_KP2,	KEY_KP3,	KEY_KP4,	KEY_KP5,	KEY_KP6,
+	KEY_KP7,	KEY_KP8,	KEY_KP9,	KEY_KP0,	KEY_KPDOT,
+	KEY_102ND,	KEY_COMPOSE,	KEY_POWER,	KEY_KPEQUAL,	KEY_F13,
+	KEY_F14,	KEY_F15,	KEY_F16,	KEY_F17,	KEY_F18,
+	KEY_F19,	KEY_F20,	KEY_F21,	KEY_F22,	KEY_F23,
+	KEY_F24,	KEY_OPEN,	KEY_HELP,	KEY_PROPS,	KEY_FRONT,
+	KEY_STOP,	KEY_AGAIN,	KEY_UNDO,	KEY_CUT,	KEY_COPY,
+	KEY_PASTE,	KEY_FIND,	KEY_MUTE,	KEY_VOLUMEUP,	KEY_VOLUMEDOWN,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_KPCOMMA,	KEY_RESERVED,
+	KEY_RO,		KEY_KATAKANAHIRAGANA, KEY_YEN,	KEY_HENKAN,	KEY_MUHENKAN,
+	KEY_KPJPCOMMA,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_HANGUEL,
+	KEY_HANJA,	KEY_KATAKANA,	KEY_HIRAGANA,	KEY_ZENKAKUHANKAKU, KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_LEFTCTRL,
+	KEY_LEFTSHIFT,	KEY_LEFTALT,	KEY_LEFTMETA,	KEY_RIGHTCTRL,	KEY_RIGHTSHIFT,
+	KEY_RIGHTALT,	KEY_RIGHTMETA,	KEY_PLAYPAUSE,	KEY_STOPCD,	KEY_PREVIOUSSONG,
+	KEY_NEXTSONG,	KEY_EJECTCD,	KEY_VOLUMEUP,	KEY_VOLUMEDOWN,	KEY_MUTE,
+	KEY_WWW,	KEY_BACK,	KEY_FORWARD,	KEY_STOP,	KEY_FIND,
+	KEY_SCROLLUP,	KEY_SCROLLDOWN,	KEY_EDIT,	KEY_SLEEP,	KEY_COFFEE,
+	KEY_REFRESH,	KEY_CALC,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,
+	KEY_RESERVED
+};
+
+static void mce_kbd_rx_timeout(unsigned long data)
+{
+	struct mce_kbd_dec *mce_kbd = (struct mce_kbd_dec *)data;
+	int i;
+	unsigned char maskcode;
+
+	IR_dprintk(2, "timer callback clearing all keys\n");
+
+	for (i = 0; i < 7; i++) {
+		maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i];
+		input_report_key(mce_kbd->idev, maskcode, 0);
+	}
+
+	for (i = 0; i < MCIR2_MASK_KEYS_START; i++)
+		input_report_key(mce_kbd->idev, kbd_keycodes[i], 0);
+}
+
+static enum mce_kbd_mode mce_kbd_mode(struct mce_kbd_dec *data)
+{
+	switch (data->header & MCIR2_MODE_MASK) {
+	case MCIR2_KEYBOARD_HEADER:
+		return MCIR2_MODE_KEYBOARD;
+	case MCIR2_MOUSE_HEADER:
+		return MCIR2_MODE_MOUSE;
+	default:
+		return MCIR2_MODE_UNKNOWN;
+	}
+}
+
+static void ir_mce_kbd_process_keyboard_data(struct input_dev *idev,
+					     u32 scancode)
+{
+	u8 keydata   = (scancode >> 8) & 0xff;
+	u8 shiftmask = scancode & 0xff;
+	unsigned char keycode, maskcode;
+	int i, keystate;
+
+	IR_dprintk(1, "keyboard: keydata = 0x%02x, shiftmask = 0x%02x\n",
+		   keydata, shiftmask);
+
+	for (i = 0; i < 7; i++) {
+		maskcode = kbd_keycodes[MCIR2_MASK_KEYS_START + i];
+		if (shiftmask & (1 << i))
+			keystate = 1;
+		else
+			keystate = 0;
+		input_report_key(idev, maskcode, keystate);
+	}
+
+	if (keydata) {
+		keycode = kbd_keycodes[keydata];
+		input_report_key(idev, keycode, 1);
+	} else {
+		for (i = 0; i < MCIR2_MASK_KEYS_START; i++)
+			input_report_key(idev, kbd_keycodes[i], 0);
+	}
+}
+
+static void ir_mce_kbd_process_mouse_data(struct input_dev *idev, u32 scancode)
+{
+	/* raw mouse coordinates */
+	u8 xdata = (scancode >> 7) & 0x7f;
+	u8 ydata = (scancode >> 14) & 0x7f;
+	int x, y;
+	/* mouse buttons */
+	bool right = scancode & 0x40;
+	bool left  = scancode & 0x20;
+
+	if (xdata & 0x40)
+		x = -((~xdata & 0x7f) + 1);
+	else
+		x = xdata;
+
+	if (ydata & 0x40)
+		y = -((~ydata & 0x7f) + 1);
+	else
+		y = ydata;
+
+	IR_dprintk(1, "mouse: x = %d, y = %d, btns = %s%s\n",
+		   x, y, left ? "L" : "", right ? "R" : "");
+
+	input_report_rel(idev, REL_X, x);
+	input_report_rel(idev, REL_Y, y);
+
+	input_report_key(idev, BTN_LEFT, left);
+	input_report_key(idev, BTN_RIGHT, right);
+}
+
+/**
+ * ir_mce_kbd_decode() - Decode one mce_kbd pulse or space
+ * @dev:	the struct rc_dev descriptor of the device
+ * @ev:		the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
+{
+	struct mce_kbd_dec *data = &dev->raw->mce_kbd;
+	u32 scancode;
+	unsigned long delay;
+
+	if (!(dev->raw->enabled_protocols & RC_TYPE_MCE_KBD))
+		return 0;
+
+	if (!is_timing_event(ev)) {
+		if (ev.reset)
+			data->state = STATE_INACTIVE;
+		return 0;
+	}
+
+	if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2))
+		goto out;
+
+again:
+	IR_dprintk(2, "started at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+	if (!geq_margin(ev.duration, MCIR2_UNIT, MCIR2_UNIT / 2))
+		return 0;
+
+	switch (data->state) {
+
+	case STATE_INACTIVE:
+		if (!ev.pulse)
+			break;
+
+		/* Note: larger margin on first pulse since each MCIR2_UNIT
+		   is quite short and some hardware takes some time to
+		   adjust to the signal */
+		if (!eq_margin(ev.duration, MCIR2_PREFIX_PULSE, MCIR2_UNIT))
+			break;
+
+		data->state = STATE_HEADER_BIT_START;
+		data->count = 0;
+		data->header = 0;
+		return 0;
+
+	case STATE_HEADER_BIT_START:
+		if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2))
+			break;
+
+		data->header <<= 1;
+		if (ev.pulse)
+			data->header |= 1;
+		data->count++;
+		data->state = STATE_HEADER_BIT_END;
+		return 0;
+
+	case STATE_HEADER_BIT_END:
+		if (!is_transition(&ev, &dev->raw->prev_ev))
+			break;
+
+		decrease_duration(&ev, MCIR2_BIT_END);
+
+		if (data->count != MCIR2_HEADER_NBITS) {
+			data->state = STATE_HEADER_BIT_START;
+			goto again;
+		}
+
+		switch (mce_kbd_mode(data)) {
+		case MCIR2_MODE_KEYBOARD:
+			data->wanted_bits = MCIR2_KEYBOARD_NBITS;
+			break;
+		case MCIR2_MODE_MOUSE:
+			data->wanted_bits = MCIR2_MOUSE_NBITS;
+			break;
+		default:
+			IR_dprintk(1, "not keyboard or mouse data\n");
+			goto out;
+		}
+
+		data->count = 0;
+		data->body = 0;
+		data->state = STATE_BODY_BIT_START;
+		goto again;
+
+	case STATE_BODY_BIT_START:
+		if (geq_margin(ev.duration, MCIR2_MAX_LEN, MCIR2_UNIT / 2))
+			break;
+
+		data->body <<= 1;
+		if (ev.pulse)
+			data->body |= 1;
+		data->count++;
+		data->state = STATE_BODY_BIT_END;
+		return 0;
+
+	case STATE_BODY_BIT_END:
+		if (!is_transition(&ev, &dev->raw->prev_ev))
+			break;
+
+		if (data->count == data->wanted_bits)
+			data->state = STATE_FINISHED;
+		else
+			data->state = STATE_BODY_BIT_START;
+
+		decrease_duration(&ev, MCIR2_BIT_END);
+		goto again;
+
+	case STATE_FINISHED:
+		if (ev.pulse)
+			break;
+
+		switch (data->wanted_bits) {
+		case MCIR2_KEYBOARD_NBITS:
+			scancode = data->body & 0xffff;
+			IR_dprintk(1, "keyboard data 0x%08x\n", data->body);
+			if (dev->timeout)
+				delay = usecs_to_jiffies(dev->timeout / 1000);
+			else
+				delay = msecs_to_jiffies(100);
+			mod_timer(&data->rx_timeout, jiffies + delay);
+			/* Pass data to keyboard buffer parser */
+			ir_mce_kbd_process_keyboard_data(data->idev, scancode);
+			break;
+		case MCIR2_MOUSE_NBITS:
+			scancode = data->body & 0x1fffff;
+			IR_dprintk(1, "mouse data 0x%06x\n", scancode);
+			/* Pass data to mouse buffer parser */
+			ir_mce_kbd_process_mouse_data(data->idev, scancode);
+			break;
+		default:
+			IR_dprintk(1, "not keyboard or mouse data\n");
+			goto out;
+		}
+
+		data->state = STATE_INACTIVE;
+		input_sync(data->idev);
+		return 0;
+	}
+
+out:
+	IR_dprintk(1, "failed at state %i (%uus %s)\n",
+		   data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+	data->state = STATE_INACTIVE;
+	input_sync(data->idev);
+	return -EINVAL;
+}
+
+static int ir_mce_kbd_register(struct rc_dev *dev)
+{
+	struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
+	struct input_dev *idev;
+	int i, ret;
+
+	idev = input_allocate_device();
+	if (!idev)
+		return -ENOMEM;
+
+	snprintf(mce_kbd->name, sizeof(mce_kbd->name),
+		 "MCE IR Keyboard/Mouse (%s)", dev->driver_name);
+	strlcat(mce_kbd->phys, "/input0", sizeof(mce_kbd->phys));
+
+	idev->name = mce_kbd->name;
+	idev->phys = mce_kbd->phys;
+
+	/* Keyboard bits */
+	set_bit(EV_KEY, idev->evbit);
+	set_bit(EV_REP, idev->evbit);
+	for (i = 0; i < sizeof(kbd_keycodes); i++)
+		set_bit(kbd_keycodes[i], idev->keybit);
+
+	/* Mouse bits */
+	set_bit(EV_REL, idev->evbit);
+	set_bit(REL_X, idev->relbit);
+	set_bit(REL_Y, idev->relbit);
+	set_bit(BTN_LEFT, idev->keybit);
+	set_bit(BTN_RIGHT, idev->keybit);
+
+	/* Report scancodes too */
+	set_bit(EV_MSC, idev->evbit);
+	set_bit(MSC_SCAN, idev->mscbit);
+
+	setup_timer(&mce_kbd->rx_timeout, mce_kbd_rx_timeout,
+		    (unsigned long)mce_kbd);
+
+	input_set_drvdata(idev, mce_kbd);
+
+#if 0
+	/* Adding this reference means two input devices are associated with
+	 * this rc-core device, which ir-keytable doesn't cope with yet */
+	idev->dev.parent = &dev->dev;
+#endif
+
+	ret = input_register_device(idev);
+	if (ret < 0) {
+		input_free_device(idev);
+		return -EIO;
+	}
+
+	mce_kbd->idev = idev;
+
+	return 0;
+}
+
+static int ir_mce_kbd_unregister(struct rc_dev *dev)
+{
+	struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
+	struct input_dev *idev = mce_kbd->idev;
+
+	del_timer_sync(&mce_kbd->rx_timeout);
+	input_unregister_device(idev);
+
+	return 0;
+}
+
+static struct ir_raw_handler mce_kbd_handler = {
+	.protocols	= RC_TYPE_MCE_KBD,
+	.decode		= ir_mce_kbd_decode,
+	.raw_register	= ir_mce_kbd_register,
+	.raw_unregister	= ir_mce_kbd_unregister,
+};
+
+static int __init ir_mce_kbd_decode_init(void)
+{
+	ir_raw_handler_register(&mce_kbd_handler);
+
+	printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n");
+	return 0;
+}
+
+static void __exit ir_mce_kbd_decode_exit(void)
+{
+	ir_raw_handler_unregister(&mce_kbd_handler);
+}
+
+module_init(ir_mce_kbd_decode_init);
+module_exit(ir_mce_kbd_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_DESCRIPTION("MCE Keyboard/mouse IR protocol decoder");
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 423ed45d6c5..27808bb59eb 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -355,6 +355,7 @@ static void init_decoders(struct work_struct *work)
 	load_rc6_decode();
 	load_jvc_decode();
 	load_sony_decode();
+	load_mce_kbd_decode();
 	load_lirc_codec();
 
 	/* If needed, we may later add some init code. In this case,
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index d20168fe4c4..682009d76cd 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -382,7 +382,7 @@ static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle)
 /* transmit out IR pulses; what you get here is a batch of alternating
  * pulse/space/pulse/space lengths that we should write out completely through
  * the FIFO, blocking on a full FIFO */
-static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n)
+static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n)
 {
 	unsigned long flags;
 	struct ite_dev *dev = rcdev->priv;
@@ -398,9 +398,6 @@ static int ite_tx_ir(struct rc_dev *rcdev, int *txbuf, u32 n)
 	/* clear the array just in case */
 	memset(last_sent, 0, ARRAY_SIZE(last_sent));
 
-	/* n comes in bytes; convert to ints */
-	n /= sizeof(int);
-
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* let everybody know we're now transmitting */
diff --git a/drivers/media/rc/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 01b69bcc866..c3907e211d3 100644
--- a/drivers/media/rc/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -29,7 +29,7 @@ static struct rc_map_table rc6_mce[] = {
 
 	{ 0x800f040a, KEY_DELETE },
 	{ 0x800f040b, KEY_ENTER },
-	{ 0x800f040c, KEY_POWER },		/* PC Power */
+	{ 0x800f040c, KEY_SLEEP },		/* Formerly PC Power */
 	{ 0x800f040d, KEY_MEDIA },		/* Windows MCE button */
 	{ 0x800f040e, KEY_MUTE },
 	{ 0x800f040f, KEY_INFO },
@@ -44,7 +44,6 @@ static struct rc_map_table rc6_mce[] = {
 	{ 0x800f0416, KEY_PLAY },
 	{ 0x800f0417, KEY_RECORD },
 	{ 0x800f0418, KEY_PAUSE },
-	{ 0x800f046e, KEY_PLAYPAUSE },
 	{ 0x800f0419, KEY_STOP },
 	{ 0x800f041a, KEY_NEXT },
 	{ 0x800f041b, KEY_PREVIOUS },
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index ec972dc2579..85ff9a1ffb3 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -692,20 +692,18 @@ static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
 }
 
 /* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 {
 	struct mceusb_dev *ir = dev->priv;
 	int i, ret = 0;
-	int count, cmdcount = 0;
+	int cmdcount = 0;
 	unsigned char *cmdbuf; /* MCE command buffer */
 	long signal_duration = 0; /* Singnal length in us */
 	struct timeval start_time, end_time;
 
 	do_gettimeofday(&start_time);
 
-	count = n / sizeof(int);
-
-	cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
+	cmdbuf = kzalloc(sizeof(unsigned) * MCE_CMDBUF_SIZE, GFP_KERNEL);
 	if (!cmdbuf)
 		return -ENOMEM;
 
@@ -774,7 +772,7 @@ static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 
 out:
 	kfree(cmdbuf);
-	return ret ? ret : n;
+	return ret ? ret : count;
 }
 
 /* Sets active IR outputs -- mce devices typically have two */
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index ce595f9ab4c..eae05b50047 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -546,24 +546,18 @@ static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier)
  * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
  * set TXFCONT as 0xff, until buf_count less than 0xff.
  */
-static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+static int nvt_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned n)
 {
 	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
-	size_t cur_count;
 	unsigned int i;
 	u8 iren;
 	int ret;
 
 	spin_lock_irqsave(&nvt->tx.lock, flags);
 
-	if (n >= TX_BUF_LEN) {
-		nvt->tx.buf_count = cur_count = TX_BUF_LEN;
-		ret = TX_BUF_LEN;
-	} else {
-		nvt->tx.buf_count = cur_count = n;
-		ret = n;
-	}
+	ret = min((unsigned)(TX_BUF_LEN / sizeof(unsigned)), n);
+	nvt->tx.buf_count = (ret * sizeof(unsigned));
 
 	memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
 
diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 873b3878975..04c2c722b6e 100644
--- a/drivers/media/rc/rc-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -84,6 +84,17 @@ struct ir_raw_event_ctrl {
 		unsigned count;
 		unsigned wanted_bits;
 	} rc5_sz;
+	struct mce_kbd_dec {
+		struct input_dev *idev;
+		struct timer_list rx_timeout;
+		char name[64];
+		char phys[64];
+		int state;
+		u8 header;
+		u32 body;
+		unsigned count;
+		unsigned wanted_bits;
+	} mce_kbd;
 	struct lirc_codec {
 		struct rc_dev *dev;
 		struct lirc_driver *drv;
@@ -182,6 +193,13 @@ void ir_raw_init(void);
 #define load_sony_decode()	0
 #endif
 
+/* from ir-mce_kbd-decoder.c */
+#ifdef CONFIG_IR_MCE_KBD_DECODER_MODULE
+#define load_mce_kbd_decode()	request_module("ir-mce_kbd-decoder")
+#else
+#define load_mce_kbd_decode()	0
+#endif
+
 /* from ir-lirc-codec.c */
 #ifdef CONFIG_IR_LIRC_CODEC_MODULE
 #define load_lirc_codec()	request_module("ir-lirc-codec")
diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c
index cc846b2619c..efc6a514348 100644
--- a/drivers/media/rc/rc-loopback.c
+++ b/drivers/media/rc/rc-loopback.c
@@ -101,21 +101,14 @@ static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max)
 	return 0;
 }
 
-static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 {
 	struct loopback_dev *lodev = dev->priv;
 	u32 rxmask;
-	unsigned count;
 	unsigned total_duration = 0;
 	unsigned i;
 	DEFINE_IR_RAW_EVENT(rawir);
 
-	if (n == 0 || n % sizeof(int)) {
-		dprintk("invalid tx buffer size\n");
-		return -EINVAL;
-	}
-
-	count = n / sizeof(int);
 	for (i = 0; i < count; i++)
 		total_duration += abs(txbuf[i]);
 
@@ -142,7 +135,7 @@ static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 
 	for (i = 0; i < count; i++) {
 		rawir.pulse = i % 2 ? false : true;
-		rawir.duration = abs(txbuf[i]) * 1000;
+		rawir.duration = txbuf[i] * 1000;
 		if (rawir.duration)
 			ir_raw_event_store_with_filter(dev, &rawir);
 	}
@@ -158,7 +151,7 @@ out:
 	/* Lirc expects this function to take as long as the total duration */
 	set_current_state(TASK_INTERRUPTIBLE);
 	schedule_timeout(usecs_to_jiffies(total_duration));
-	return n;
+	return count;
 }
 
 static void loop_set_idle(struct rc_dev *dev, bool enable)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 3186ac7c2c1..51a23f48bc7 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -735,6 +735,7 @@ static struct {
 	{ RC_TYPE_JVC,		"jvc"		},
 	{ RC_TYPE_SONY,		"sony"		},
 	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ RC_TYPE_MCE_KBD,	"mce_kbd"	},
 	{ RC_TYPE_LIRC,		"lirc"		},
 	{ RC_TYPE_OTHER,	"other"		},
 };
@@ -1099,7 +1100,6 @@ int rc_register_device(struct rc_dev *dev)
 		if (rc < 0)
 			goto out_input;
 	}
-	mutex_unlock(&dev->lock);
 
 	if (dev->change_protocol) {
 		rc = dev->change_protocol(dev, rc_map->rc_type);
@@ -1107,6 +1107,8 @@ int rc_register_device(struct rc_dev *dev)
 			goto out_raw;
 	}
 
+	mutex_unlock(&dev->lock);
+
 	IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n",
 		   dev->devno,
 		   dev->driver_name ? dev->driver_name : "unknown",
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 5147767ccb7..a1660447791 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -205,6 +205,7 @@ struct redrat3_dev {
 
 	/* rx signal timeout timer */
 	struct timer_list rx_timeout;
+	u32 hw_timeout;
 
 	/* Is the device currently receiving? */
 	bool recv_in_progress;
@@ -414,20 +415,10 @@ static u32 redrat3_us_to_len(u32 microsec)
 
 }
 
-/* timer callback to send long trailing space on receive timeout */
+/* timer callback to send reset event */
 static void redrat3_rx_timeout(unsigned long data)
 {
 	struct redrat3_dev *rr3 = (struct redrat3_dev *)data;
-	DEFINE_IR_RAW_EVENT(rawir);
-
-	rawir.pulse = false;
-	rawir.duration = rr3->rc->timeout;
-	rr3_dbg(rr3->dev, "storing trailing space with duration %d\n",
-		rawir.duration);
-	ir_raw_event_store_with_filter(rr3->rc, &rawir);
-
-	rr3_dbg(rr3->dev, "calling ir_raw_event_handle\n");
-	ir_raw_event_handle(rr3->rc);
 
 	rr3_dbg(rr3->dev, "calling ir_raw_event_reset\n");
 	ir_raw_event_reset(rr3->rc);
@@ -438,7 +429,7 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 	DEFINE_IR_RAW_EVENT(rawir);
 	struct redrat3_signal_header header;
 	struct device *dev;
-	int i;
+	int i, trailer = 0;
 	unsigned long delay;
 	u32 mod_freq, single_len;
 	u16 *len_vals;
@@ -464,7 +455,8 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 	if (!(header.length >= RR3_HEADER_LENGTH))
 		dev_warn(dev, "read returned less than rr3 header len\n");
 
-	delay = usecs_to_jiffies(rr3->rc->timeout / 1000);
+	/* Make sure we reset the IR kfifo after a bit of inactivity */
+	delay = usecs_to_jiffies(rr3->hw_timeout);
 	mod_timer(&rr3->rx_timeout, jiffies + delay);
 
 	memcpy(&tmp32, sig_data + RR3_PAUSE_OFFSET, sizeof(tmp32));
@@ -506,9 +498,6 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 		u16 val = len_vals[data_vals[i]];
 		single_len = redrat3_len_to_us((u32)be16_to_cpu(val));
 
-		/* cap the value to IR_MAX_DURATION */
-		single_len &= IR_MAX_DURATION;
-
 		/* we should always get pulse/space/pulse/space samples */
 		if (i % 2)
 			rawir.pulse = false;
@@ -516,6 +505,12 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 			rawir.pulse = true;
 
 		rawir.duration = US_TO_NS(single_len);
+		/* Save initial pulse length to fudge trailer */
+		if (i == 0)
+			trailer = rawir.duration;
+		/* cap the value to IR_MAX_DURATION */
+		rawir.duration &= IR_MAX_DURATION;
+
 		rr3_dbg(dev, "storing %s with duration %d (i: %d)\n",
 			rawir.pulse ? "pulse" : "space", rawir.duration, i);
 		ir_raw_event_store_with_filter(rr3->rc, &rawir);
@@ -525,7 +520,10 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
 	if (i % 2) {
 		rawir.pulse = false;
 		/* this duration is made up, and may not be ideal... */
-		rawir.duration = rr3->rc->timeout / 2;
+		if (trailer < US_TO_NS(1000))
+			rawir.duration = US_TO_NS(2800);
+		else
+			rawir.duration = trailer;
 		rr3_dbg(dev, "storing trailing space with duration %d\n",
 			rawir.duration);
 		ir_raw_event_store_with_filter(rr3->rc, &rawir);
@@ -629,36 +627,31 @@ static inline void redrat3_delete(struct redrat3_dev *rr3,
 	kfree(rr3);
 }
 
-static u32 redrat3_get_timeout(struct device *dev,
-			       struct rc_dev *rc, struct usb_device *udev)
+static u32 redrat3_get_timeout(struct redrat3_dev *rr3)
 {
 	u32 *tmp;
-	u32 timeout = MS_TO_NS(150); /* a sane default, if things go haywire */
+	u32 timeout = MS_TO_US(150); /* a sane default, if things go haywire */
 	int len, ret, pipe;
 
 	len = sizeof(*tmp);
 	tmp = kzalloc(len, GFP_KERNEL);
 	if (!tmp) {
-		dev_warn(dev, "Memory allocation faillure\n");
+		dev_warn(rr3->dev, "Memory allocation faillure\n");
 		return timeout;
 	}
 
-	pipe = usb_rcvctrlpipe(udev, 0);
-	ret = usb_control_msg(udev, pipe, RR3_GET_IR_PARAM,
+	pipe = usb_rcvctrlpipe(rr3->udev, 0);
+	ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM,
 			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 			      RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5);
 	if (ret != len) {
-		dev_warn(dev, "Failed to read timeout from hardware\n");
+		dev_warn(rr3->dev, "Failed to read timeout from hardware\n");
 		return timeout;
 	}
 
-	timeout = US_TO_NS(redrat3_len_to_us(be32_to_cpu(*tmp)));
-	if (timeout < rc->min_timeout)
-		timeout = rc->min_timeout;
-	else if (timeout > rc->max_timeout)
-		timeout = rc->max_timeout;
+	timeout = redrat3_len_to_us(be32_to_cpu(*tmp));
 
-	rr3_dbg(dev, "Got timeout of %d ms\n", timeout / (1000 * 1000));
+	rr3_dbg(rr3->dev, "Got timeout of %d ms\n", timeout / 1000);
 	return timeout;
 }
 
@@ -1110,9 +1103,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
 	rc->priv = rr3;
 	rc->driver_type = RC_DRIVER_IR_RAW;
 	rc->allowed_protos = RC_TYPE_ALL;
-	rc->min_timeout = MS_TO_NS(RR3_RX_MIN_TIMEOUT);
-	rc->max_timeout = MS_TO_NS(RR3_RX_MAX_TIMEOUT);
-	rc->timeout = redrat3_get_timeout(dev, rc, rr3->udev);
+	rc->timeout = US_TO_NS(2750);
 	rc->tx_ir = redrat3_transmit_ir;
 	rc->s_tx_carrier = redrat3_set_tx_carrier;
 	rc->driver_name = DRIVER_NAME;
@@ -1186,7 +1177,7 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf,
 	rr3 = kzalloc(sizeof(*rr3), GFP_KERNEL);
 	if (rr3 == NULL) {
 		dev_err(dev, "Memory allocation failure\n");
-		goto error;
+		goto no_endpoints;
 	}
 
 	rr3->dev = &intf->dev;
@@ -1242,6 +1233,9 @@ static int __devinit redrat3_dev_probe(struct usb_interface *intf,
 	if (retval < 0)
 		goto error;
 
+	/* store current hardware timeout, in us, will use for kfifo resets */
+	rr3->hw_timeout = redrat3_get_timeout(rr3);
+
 	/* default.. will get overridden by any sends with a freq defined */
 	rr3->carrier = 38000;
 
@@ -1280,6 +1274,7 @@ static void __devexit redrat3_dev_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	rc_unregister_device(rr3->rc);
+	del_timer_sync(&rr3->rx_timeout);
 	redrat3_delete(rr3, udev);
 
 	rr3_ftr(&intf->dev, "RedRat3 IR Transceiver now disconnected\n");
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 5d06b899e85..bec8abc965f 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -6,8 +6,8 @@
  *  could probably support others (Winbond WEC102X, NatSemi, etc)
  *  with minor modifications.
  *
- *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
+ *  Original Author: David Härdeman <david@hardeman.nu>
+ *     Copyright (C) 2009 - 2011 David Härdeman <david@hardeman.nu>
  *
  *  Dedicated to my daughter Matilda, without whose loving attention this
  *  driver would have been finished in half the time and with a fraction
@@ -577,16 +577,12 @@ wbcir_txmask(struct rc_dev *dev, u32 mask)
 }
 
 static int
-wbcir_tx(struct rc_dev *dev, int *buf, u32 bufsize)
+wbcir_tx(struct rc_dev *dev, unsigned *buf, unsigned count)
 {
 	struct wbcir_data *data = dev->priv;
-	u32 count;
 	unsigned i;
 	unsigned long flags;
 
-	/* bufsize has been sanity checked by the caller */
-	count = bufsize / sizeof(int);
-
 	/* Not sure if this is possible, but better safe than sorry */
 	spin_lock_irqsave(&data->spinlock, flags);
 	if (data->txstate != WBCIR_TXSTATE_INACTIVE) {
@@ -876,18 +872,8 @@ wbcir_init_hw(struct wbcir_data *data)
 	/* prescaler 1.0, tx/rx fifo lvl 16 */
 	outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
 
-	/* Set baud divisor to generate one byte per bit/cell */
-	switch (protocol) {
-	case IR_PROTOCOL_RC5:
-		outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_RC6:
-		outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	case IR_PROTOCOL_NEC:
-		outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
-		break;
-	}
+	/* Set baud divisor to sample every 10 us */
+	outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL);
 	outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
 
 	/* Set CEIR mode */
@@ -896,9 +882,9 @@ wbcir_init_hw(struct wbcir_data *data)
 	inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
 	inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
 
-	/* Disable RX demod, run-length encoding/decoding, set freq span */
+	/* Disable RX demod, enable run-length enc/dec, set freq span */
 	wbcir_select_bank(data, WBCIR_BANK_7);
-	outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+	outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
 
 	/* Disable timer */
 	wbcir_select_bank(data, WBCIR_BANK_4);
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index bb53de7fe40..f574dc012ca 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -489,6 +489,15 @@ config VIDEO_TCM825X
 	  This is a driver for the Toshiba TCM825x VGA camera sensor.
 	  It is used for example in Nokia N800.
 
+comment "Flash devices"
+
+config VIDEO_ADP1653
+	tristate "ADP1653 flash support"
+	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+	---help---
+	  This is a driver for the ADP1653 flash controller. It is used for
+	  example in Nokia N900.
+
 comment "Video improvement chips"
 
 config VIDEO_UPD64031A
@@ -707,6 +716,8 @@ source "drivers/media/video/cx18/Kconfig"
 
 source "drivers/media/video/saa7164/Kconfig"
 
+source "drivers/media/video/marvell-ccic/Kconfig"
+
 config VIDEO_M32R_AR
 	tristate "AR devices"
 	depends on M32R && VIDEO_V4L2
@@ -726,15 +737,6 @@ config VIDEO_M32R_AR_M64278
 	  To compile this driver as a module, choose M here: the
 	  module will be called arv.
 
-config VIDEO_CAFE_CCIC
-	tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
-	depends on PCI && I2C && VIDEO_V4L2
-	select VIDEO_OV7670
-	---help---
-	  This is a video4linux2 driver for the Marvell 88ALP01 integrated
-	  CMOS camera controller.  This is the controller found on first-
-	  generation OLPC systems.
-
 config VIDEO_SR030PC30
 	tristate "SR030PC30 VGA camera sensor support"
 	depends on I2C && VIDEO_V4L2
@@ -846,6 +848,12 @@ config SOC_CAMERA_OV2640
 	help
 	  This is a ov2640 camera driver
 
+config SOC_CAMERA_OV5642
+	tristate "ov5642 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a V4L2 camera driver for the OmniVision OV5642 sensor
+
 config SOC_CAMERA_OV6650
 	tristate "ov6650 sensor support"
 	depends on SOC_CAMERA && I2C
@@ -952,6 +960,14 @@ config  VIDEO_SAMSUNG_S5P_FIMC
 	  To compile this driver as a module, choose M here: the
 	  module will be called s5p-fimc.
 
+config VIDEO_ATMEL_ISI
+	tristate "ATMEL Image Sensor Interface (ISI) support"
+	depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This module makes the ATMEL Image Sensor Interface available
+	  as a v4l2 device.
+
 config VIDEO_S5P_MIPI_CSIS
 	tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver"
 	depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API
@@ -961,6 +977,8 @@ config VIDEO_S5P_MIPI_CSIS
 	  To compile this driver as a module, choose M here: the
 	  module will be called s5p-csis.
 
+source "drivers/media/video/s5p-tv/Kconfig"
+
 #
 # USB Multimedia device configuration
 #
@@ -1056,4 +1074,12 @@ config VIDEO_MEM2MEM_TESTDEV
 	  framework.
 
 
+config VIDEO_SAMSUNG_S5P_MFC
+	tristate "Samsung S5P MFC 5.1 Video Codec"
+	depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
+	select VIDEOBUF2_DMA_CONTIG
+	default n
+	help
+	    MFC 5.1 driver for V4L2.
+
 endif # V4L_MEM2MEM_DRIVERS
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index f0fecd6f6a3..272390072ae 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
 obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
+obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
@@ -78,6 +79,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
 obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
 obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
 obj-$(CONFIG_SOC_CAMERA_OV2640)		+= ov2640.o
+obj-$(CONFIG_SOC_CAMERA_OV5642)		+= ov5642.o
 obj-$(CONFIG_SOC_CAMERA_OV6650)		+= ov6650.o
 obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
 obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
@@ -127,7 +129,8 @@ obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
 obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
-obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
+obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
 
 obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 
@@ -166,8 +169,11 @@ obj-$(CONFIG_VIDEO_PXA27x)		+= pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2)	+= sh_mobile_csi2.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)	+= sh_mobile_ceu_camera.o
 obj-$(CONFIG_VIDEO_OMAP1)		+= omap1_camera.o
+obj-$(CONFIG_VIDEO_ATMEL_ISI)		+= atmel-isi.o
 
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) 	+= s5p-fimc/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV)	+= s5p-tv/
 
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
 
diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
new file mode 100644
index 00000000000..be7befd6094
--- /dev/null
+++ b/drivers/media/video/adp1653.c
@@ -0,0 +1,491 @@
+/*
+ * drivers/media/video/adp1653.c
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *	Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *	Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * TODO:
+ * - fault interrupt handling
+ * - hardware strobe
+ * - power doesn't need to be ON if all lights are off
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <media/adp1653.h>
+#include <media/v4l2-device.h>
+
+#define TIMEOUT_MAX		820000
+#define TIMEOUT_STEP		54600
+#define TIMEOUT_MIN		(TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
+				 * TIMEOUT_STEP)
+#define TIMEOUT_US_TO_CODE(t)	((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \
+				 / TIMEOUT_STEP)
+#define TIMEOUT_CODE_TO_US(c)	(TIMEOUT_MAX - (c) * TIMEOUT_STEP)
+
+/* Write values into ADP1653 registers. */
+static int adp1653_update_hw(struct adp1653_flash *flash)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	u8 out_sel;
+	u8 config = 0;
+	int rval;
+
+	out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
+		flash->indicator_intensity->val)
+		<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
+
+	switch (flash->led_mode->val) {
+	case V4L2_FLASH_LED_MODE_NONE:
+		break;
+	case V4L2_FLASH_LED_MODE_FLASH:
+		/* Flash mode, light on with strobe, duration from timer */
+		config = ADP1653_REG_CONFIG_TMR_CFG;
+		config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val)
+			  << ADP1653_REG_CONFIG_TMR_SET_SHIFT;
+		break;
+	case V4L2_FLASH_LED_MODE_TORCH:
+		/* Torch mode, light immediately on, duration indefinite */
+		out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
+			flash->torch_intensity->val)
+			<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
+		break;
+	}
+
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
+	if (rval < 0)
+		return rval;
+
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config);
+	if (rval < 0)
+		return rval;
+
+	return 0;
+}
+
+static int adp1653_get_fault(struct adp1653_flash *flash)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	int fault;
+	int rval;
+
+	fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT);
+	if (IS_ERR_VALUE(fault))
+		return fault;
+
+	flash->fault |= fault;
+
+	if (!flash->fault)
+		return 0;
+
+	/* Clear faults. */
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+
+	flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE;
+
+	rval = adp1653_update_hw(flash);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+
+	return flash->fault;
+}
+
+static int adp1653_strobe(struct adp1653_flash *flash, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
+		flash->indicator_intensity->val)
+		<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
+	int rval;
+
+	if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH)
+		return -EBUSY;
+
+	if (!enable)
+		return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL,
+						 out_sel);
+
+	out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
+		flash->flash_intensity->val)
+		<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
+	if (rval)
+		return rval;
+
+	/* Software strobe using i2c */
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE,
+		ADP1653_REG_SW_STROBE_SW_STROBE);
+	if (rval)
+		return rval;
+	return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0);
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 controls
+ */
+
+static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct adp1653_flash *flash =
+		container_of(ctrl->handler, struct adp1653_flash, ctrls);
+	int rval;
+
+	rval = adp1653_get_fault(flash);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+
+	ctrl->cur.val = 0;
+
+	if (flash->fault & ADP1653_REG_FAULT_FLT_SCP)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
+	if (flash->fault & ADP1653_REG_FAULT_FLT_OT)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
+	if (flash->fault & ADP1653_REG_FAULT_FLT_TMR)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
+	if (flash->fault & ADP1653_REG_FAULT_FLT_OV)
+		ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
+
+	flash->fault = 0;
+
+	return 0;
+}
+
+static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct adp1653_flash *flash =
+		container_of(ctrl->handler, struct adp1653_flash, ctrls);
+	int rval;
+
+	rval = adp1653_get_fault(flash);
+	if (IS_ERR_VALUE(rval))
+		return rval;
+	if ((rval & (ADP1653_REG_FAULT_FLT_SCP |
+		     ADP1653_REG_FAULT_FLT_OT |
+		     ADP1653_REG_FAULT_FLT_OV)) &&
+	    (ctrl->id == V4L2_CID_FLASH_STROBE ||
+	     ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY ||
+	     ctrl->id == V4L2_CID_FLASH_LED_MODE))
+		return -EBUSY;
+
+	switch (ctrl->id) {
+	case V4L2_CID_FLASH_STROBE:
+		return adp1653_strobe(flash, 1);
+	case V4L2_CID_FLASH_STROBE_STOP:
+		return adp1653_strobe(flash, 0);
+	}
+
+	return adp1653_update_hw(flash);
+}
+
+static const struct v4l2_ctrl_ops adp1653_ctrl_ops = {
+	.g_volatile_ctrl = adp1653_get_ctrl,
+	.s_ctrl = adp1653_set_ctrl,
+};
+
+static int adp1653_init_controls(struct adp1653_flash *flash)
+{
+	struct v4l2_ctrl *fault;
+
+	v4l2_ctrl_handler_init(&flash->ctrls, 9);
+
+	flash->led_mode =
+		v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
+				       V4L2_CID_FLASH_LED_MODE,
+				       V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0);
+	v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
+			       V4L2_CID_FLASH_STROBE_SOURCE,
+			       V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0);
+	v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+			  V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+	v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+			  V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+	flash->flash_timeout =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN,
+				  flash->platform_data->max_flash_timeout,
+				  TIMEOUT_STEP,
+				  flash->platform_data->max_flash_timeout);
+	flash->flash_intensity =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_INTENSITY,
+				  ADP1653_FLASH_INTENSITY_MIN,
+				  flash->platform_data->max_flash_intensity,
+				  1, flash->platform_data->max_flash_intensity);
+	flash->torch_intensity =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_TORCH_INTENSITY,
+				  ADP1653_TORCH_INTENSITY_MIN,
+				  flash->platform_data->max_torch_intensity,
+				  ADP1653_FLASH_INTENSITY_STEP,
+				  flash->platform_data->max_torch_intensity);
+	flash->indicator_intensity =
+		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_INDICATOR_INTENSITY,
+				  ADP1653_INDICATOR_INTENSITY_MIN,
+				  flash->platform_data->max_indicator_intensity,
+				  ADP1653_INDICATOR_INTENSITY_STEP,
+				  ADP1653_INDICATOR_INTENSITY_MIN);
+	fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+				  V4L2_CID_FLASH_FAULT, 0,
+				  V4L2_FLASH_FAULT_OVER_VOLTAGE
+				  | V4L2_FLASH_FAULT_OVER_TEMPERATURE
+				  | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
+
+	if (flash->ctrls.error)
+		return flash->ctrls.error;
+
+	fault->is_volatile = 1;
+
+	flash->subdev.ctrl_handler = &flash->ctrls;
+	return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static int
+adp1653_init_device(struct adp1653_flash *flash)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+	int rval;
+
+	/* Clear FAULT register by writing zero to OUT_SEL */
+	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
+	if (rval < 0) {
+		dev_err(&client->dev, "failed writing fault register\n");
+		return -EIO;
+	}
+
+	mutex_lock(&flash->ctrls.lock);
+	/* Reset faults before reading new ones. */
+	flash->fault = 0;
+	rval = adp1653_get_fault(flash);
+	mutex_unlock(&flash->ctrls.lock);
+	if (rval > 0) {
+		dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval);
+		return -EIO;
+	}
+
+	mutex_lock(&flash->ctrls.lock);
+	rval = adp1653_update_hw(flash);
+	mutex_unlock(&flash->ctrls.lock);
+	if (rval) {
+		dev_err(&client->dev,
+			"adp1653_update_hw failed at %s\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int
+__adp1653_set_power(struct adp1653_flash *flash, int on)
+{
+	int ret;
+
+	ret = flash->platform_data->power(&flash->subdev, on);
+	if (ret < 0)
+		return ret;
+
+	if (!on)
+		return 0;
+
+	ret = adp1653_init_device(flash);
+	if (ret < 0)
+		flash->platform_data->power(&flash->subdev, 0);
+
+	return ret;
+}
+
+static int
+adp1653_set_power(struct v4l2_subdev *subdev, int on)
+{
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+	int ret = 0;
+
+	mutex_lock(&flash->power_lock);
+
+	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (flash->power_count == !on) {
+		ret = __adp1653_set_power(flash, !!on);
+		if (ret < 0)
+			goto done;
+	}
+
+	/* Update the power count. */
+	flash->power_count += on ? 1 : -1;
+	WARN_ON(flash->power_count < 0);
+
+done:
+	mutex_unlock(&flash->power_lock);
+	return ret;
+}
+
+static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return adp1653_set_power(sd, 1);
+}
+
+static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	return adp1653_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_core_ops adp1653_core_ops = {
+	.s_power = adp1653_set_power,
+};
+
+static const struct v4l2_subdev_ops adp1653_ops = {
+	.core = &adp1653_core_ops,
+};
+
+static const struct v4l2_subdev_internal_ops adp1653_internal_ops = {
+	.open = adp1653_open,
+	.close = adp1653_close,
+};
+
+/* --------------------------------------------------------------------------
+ * I2C driver
+ */
+#ifdef CONFIG_PM
+
+static int adp1653_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+	if (!flash->power_count)
+		return 0;
+
+	return __adp1653_set_power(flash, 0);
+}
+
+static int adp1653_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+	if (!flash->power_count)
+		return 0;
+
+	return __adp1653_set_power(flash, 1);
+}
+
+#else
+
+#define adp1653_suspend	NULL
+#define adp1653_resume	NULL
+
+#endif /* CONFIG_PM */
+
+static int adp1653_probe(struct i2c_client *client,
+			 const struct i2c_device_id *devid)
+{
+	struct adp1653_flash *flash;
+	int ret;
+
+	flash = kzalloc(sizeof(*flash), GFP_KERNEL);
+	if (flash == NULL)
+		return -ENOMEM;
+
+	flash->platform_data = client->dev.platform_data;
+
+	mutex_init(&flash->power_lock);
+
+	v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops);
+	flash->subdev.internal_ops = &adp1653_internal_ops;
+	flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+	adp1653_init_controls(flash);
+
+	ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
+	if (ret < 0)
+		kfree(flash);
+
+	return ret;
+}
+
+static int __exit adp1653_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+	struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+	v4l2_device_unregister_subdev(&flash->subdev);
+	v4l2_ctrl_handler_free(&flash->ctrls);
+	media_entity_cleanup(&flash->subdev.entity);
+	kfree(flash);
+	return 0;
+}
+
+static const struct i2c_device_id adp1653_id_table[] = {
+	{ ADP1653_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
+
+static struct dev_pm_ops adp1653_pm_ops = {
+	.suspend	= adp1653_suspend,
+	.resume		= adp1653_resume,
+};
+
+static struct i2c_driver adp1653_i2c_driver = {
+	.driver		= {
+		.name	= ADP1653_NAME,
+		.pm	= &adp1653_pm_ops,
+	},
+	.probe		= adp1653_probe,
+	.remove		= __exit_p(adp1653_remove),
+	.id_table	= adp1653_id_table,
+};
+
+static int __init adp1653_init(void)
+{
+	int rval;
+
+	rval = i2c_add_driver(&adp1653_i2c_driver);
+	if (rval)
+		printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__);
+
+	return rval;
+}
+
+static void __exit adp1653_exit(void)
+{
+	i2c_del_driver(&adp1653_i2c_driver);
+}
+
+module_init(adp1653_init);
+module_exit(adp1653_exit);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
+MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index f989f2820d8..b6ed44aebe3 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -27,7 +27,6 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
@@ -54,7 +53,7 @@
  */
 #define USE_INT		0	/* Don't modify */
 
-#define VERSION	"0.04"
+#define VERSION	"0.0.5"
 
 #define ar_inl(addr) 		inl((unsigned long)(addr))
 #define ar_outl(val, addr)	outl((unsigned long)(val), (unsigned long)(addr))
@@ -404,7 +403,6 @@ static int ar_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, ar->vdev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "Colour AR VGA", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "Platform", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 4);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
@@ -879,3 +877,4 @@ module_exit(ar_cleanup_module);
 MODULE_AUTHOR("Takeo Takahashi <takahashi.takeo@renesas.com>");
 MODULE_DESCRIPTION("Colour AR M64278(VGA) for Video4Linux");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VERSION);
diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
new file mode 100644
index 00000000000..7b89f00501b
--- /dev/null
+++ b/drivers/media/video/atmel-isi.c
@@ -0,0 +1,1048 @@
+/*
+ * Copyright (c) 2011 Atmel Corporation
+ * Josh Wu, <josh.wu@atmel.com>
+ *
+ * Based on previous work by Lars Haring, <lars.haring@atmel.com>
+ * and Sedji Gaouaou
+ * Based on the bttv driver for Bt848 with respective copyright holders
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <media/atmel-isi.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+#include <media/videobuf2-dma-contig.h>
+
+#define MAX_BUFFER_NUM			32
+#define MAX_SUPPORT_WIDTH		2048
+#define MAX_SUPPORT_HEIGHT		2048
+#define VID_LIMIT_BYTES			(16 * 1024 * 1024)
+#define MIN_FRAME_RATE			15
+#define FRAME_INTERVAL_MILLI_SEC	(1000 / MIN_FRAME_RATE)
+
+/* ISI states */
+enum {
+	ISI_STATE_IDLE = 0,
+	ISI_STATE_READY,
+	ISI_STATE_WAIT_SOF,
+};
+
+/* Frame buffer descriptor */
+struct fbd {
+	/* Physical address of the frame buffer */
+	u32 fb_address;
+	/* DMA Control Register(only in HISI2) */
+	u32 dma_ctrl;
+	/* Physical address of the next fbd */
+	u32 next_fbd_address;
+};
+
+static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl)
+{
+	fb_desc->dma_ctrl = ctrl;
+}
+
+struct isi_dma_desc {
+	struct list_head list;
+	struct fbd *p_fbd;
+	u32 fbd_phys;
+};
+
+/* Frame buffer data */
+struct frame_buffer {
+	struct vb2_buffer vb;
+	struct isi_dma_desc *p_dma_desc;
+	struct list_head list;
+};
+
+struct atmel_isi {
+	/* Protects the access of variables shared with the ISR */
+	spinlock_t			lock;
+	void __iomem			*regs;
+
+	int				sequence;
+	/* State of the ISI module in capturing mode */
+	int				state;
+
+	/* Wait queue for waiting for SOF */
+	wait_queue_head_t		vsync_wq;
+
+	struct vb2_alloc_ctx		*alloc_ctx;
+
+	/* Allocate descriptors for dma buffer use */
+	struct fbd			*p_fb_descriptors;
+	u32				fb_descriptors_phys;
+	struct				list_head dma_desc_head;
+	struct isi_dma_desc		dma_desc[MAX_BUFFER_NUM];
+
+	struct completion		complete;
+	struct clk			*pclk;
+	unsigned int			irq;
+
+	struct isi_platform_data	*pdata;
+
+	struct list_head		video_buffer_list;
+	struct frame_buffer		*active;
+
+	struct soc_camera_device	*icd;
+	struct soc_camera_host		soc_host;
+};
+
+static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val)
+{
+	writel(val, isi->regs + reg);
+}
+static u32 isi_readl(struct atmel_isi *isi, u32 reg)
+{
+	return readl(isi->regs + reg);
+}
+
+static int configure_geometry(struct atmel_isi *isi, u32 width,
+			u32 height, enum v4l2_mbus_pixelcode code)
+{
+	u32 cfg2, cr;
+
+	switch (code) {
+	/* YUV, including grey */
+	case V4L2_MBUS_FMT_Y8_1X8:
+		cr = ISI_CFG2_GRAYSCALE;
+		break;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_MODE_3;
+		break;
+	case V4L2_MBUS_FMT_VYUY8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_MODE_2;
+		break;
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_MODE_1;
+		break;
+	case V4L2_MBUS_FMT_YVYU8_2X8:
+		cr = ISI_CFG2_YCC_SWAP_DEFAULT;
+		break;
+	/* RGB, TODO */
+	default:
+		return -EINVAL;
+	}
+
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+
+	cfg2 = isi_readl(isi, ISI_CFG2);
+	cfg2 |= cr;
+	/* Set width */
+	cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK);
+	cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) &
+			ISI_CFG2_IM_HSIZE_MASK;
+	/* Set height */
+	cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK);
+	cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
+			& ISI_CFG2_IM_VSIZE_MASK;
+	isi_writel(isi, ISI_CFG2, cfg2);
+
+	return 0;
+}
+
+static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
+{
+	if (isi->active) {
+		struct vb2_buffer *vb = &isi->active->vb;
+		struct frame_buffer *buf = isi->active;
+
+		list_del_init(&buf->list);
+		do_gettimeofday(&vb->v4l2_buf.timestamp);
+		vb->v4l2_buf.sequence = isi->sequence++;
+		vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+	}
+
+	if (list_empty(&isi->video_buffer_list)) {
+		isi->active = NULL;
+	} else {
+		/* start next dma frame. */
+		isi->active = list_entry(isi->video_buffer_list.next,
+					struct frame_buffer, list);
+		isi_writel(isi, ISI_DMA_C_DSCR,
+			isi->active->p_dma_desc->fbd_phys);
+		isi_writel(isi, ISI_DMA_C_CTRL,
+			ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
+		isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
+	}
+	return IRQ_HANDLED;
+}
+
+/* ISI interrupt service routine */
+static irqreturn_t isi_interrupt(int irq, void *dev_id)
+{
+	struct atmel_isi *isi = dev_id;
+	u32 status, mask, pending;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&isi->lock);
+
+	status = isi_readl(isi, ISI_STATUS);
+	mask = isi_readl(isi, ISI_INTMASK);
+	pending = status & mask;
+
+	if (pending & ISI_CTRL_SRST) {
+		complete(&isi->complete);
+		isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST);
+		ret = IRQ_HANDLED;
+	} else if (pending & ISI_CTRL_DIS) {
+		complete(&isi->complete);
+		isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS);
+		ret = IRQ_HANDLED;
+	} else {
+		if ((pending & ISI_SR_VSYNC) &&
+				(isi->state == ISI_STATE_IDLE)) {
+			isi->state = ISI_STATE_READY;
+			wake_up_interruptible(&isi->vsync_wq);
+			ret = IRQ_HANDLED;
+		}
+		if (likely(pending & ISI_SR_CXFR_DONE))
+			ret = atmel_isi_handle_streaming(isi);
+	}
+
+	spin_unlock(&isi->lock);
+	return ret;
+}
+
+#define	WAIT_ISI_RESET		1
+#define	WAIT_ISI_DISABLE	0
+static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset)
+{
+	unsigned long timeout;
+	/*
+	 * The reset or disable will only succeed if we have a
+	 * pixel clock from the camera.
+	 */
+	init_completion(&isi->complete);
+
+	if (wait_reset) {
+		isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST);
+		isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST);
+	} else {
+		isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS);
+		isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+	}
+
+	timeout = wait_for_completion_timeout(&isi->complete,
+			msecs_to_jiffies(100));
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------
+	Videobuf operations
+   ------------------------------------------------------------------*/
+static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned long sizes[],
+				void *alloc_ctxs[])
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long size;
+	int ret, bytes_per_line;
+
+	/* Reset ISI */
+	ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
+	if (ret < 0) {
+		dev_err(icd->parent, "Reset ISI timed out\n");
+		return ret;
+	}
+	/* Disable all interrupts */
+	isi_writel(isi, ISI_INTDIS, ~0UL);
+
+	bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+						icd->current_fmt->host_fmt);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+	size = bytes_per_line * icd->user_height;
+
+	if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM)
+		*nbuffers = MAX_BUFFER_NUM;
+
+	if (size * *nbuffers > VID_LIMIT_BYTES)
+		*nbuffers = VID_LIMIT_BYTES / size;
+
+	*nplanes = 1;
+	sizes[0] = size;
+	alloc_ctxs[0] = isi->alloc_ctx;
+
+	isi->sequence = 0;
+	isi->active = NULL;
+
+	dev_dbg(icd->parent, "%s, count=%d, size=%ld\n", __func__,
+		*nbuffers, size);
+
+	return 0;
+}
+
+static int buffer_init(struct vb2_buffer *vb)
+{
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+
+	buf->p_dma_desc = NULL;
+	INIT_LIST_HEAD(&buf->list);
+
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long size;
+	struct isi_dma_desc *desc;
+	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+						icd->current_fmt->host_fmt);
+
+	if (bytes_per_line < 0)
+		return bytes_per_line;
+
+	size = bytes_per_line * icd->user_height;
+
+	if (vb2_plane_size(vb, 0) < size) {
+		dev_err(icd->parent, "%s data will not fit into plane (%lu < %lu)\n",
+				__func__, vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+
+	vb2_set_plane_payload(&buf->vb, 0, size);
+
+	if (!buf->p_dma_desc) {
+		if (list_empty(&isi->dma_desc_head)) {
+			dev_err(icd->parent, "Not enough dma descriptors.\n");
+			return -EINVAL;
+		} else {
+			/* Get an available descriptor */
+			desc = list_entry(isi->dma_desc_head.next,
+						struct isi_dma_desc, list);
+			/* Delete the descriptor since now it is used */
+			list_del_init(&desc->list);
+
+			/* Initialize the dma descriptor */
+			desc->p_fbd->fb_address =
+					vb2_dma_contig_plane_paddr(vb, 0);
+			desc->p_fbd->next_fbd_address = 0;
+			set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB);
+
+			buf->p_dma_desc = desc;
+		}
+	}
+	return 0;
+}
+
+static void buffer_cleanup(struct vb2_buffer *vb)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+
+	/* This descriptor is available now and we add to head list */
+	if (buf->p_dma_desc)
+		list_add(&buf->p_dma_desc->list, &isi->dma_desc_head);
+}
+
+static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer)
+{
+	u32 ctrl, cfg1;
+
+	cfg1 = isi_readl(isi, ISI_CFG1);
+	/* Enable irq: cxfr for the codec path, pxfr for the preview path */
+	isi_writel(isi, ISI_INTEN,
+			ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
+
+	/* Check if already in a frame */
+	if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) {
+		dev_err(isi->icd->parent, "Already in frame handling.\n");
+		return;
+	}
+
+	isi_writel(isi, ISI_DMA_C_DSCR, buffer->p_dma_desc->fbd_phys);
+	isi_writel(isi, ISI_DMA_C_CTRL, ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
+	isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
+
+	/* Enable linked list */
+	cfg1 |= isi->pdata->frate | ISI_CFG1_DISCR;
+
+	/* Enable codec path and ISI */
+	ctrl = ISI_CTRL_CDC | ISI_CTRL_EN;
+	isi_writel(isi, ISI_CTRL, ctrl);
+	isi_writel(isi, ISI_CFG1, cfg1);
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&isi->lock, flags);
+	list_add_tail(&buf->list, &isi->video_buffer_list);
+
+	if (isi->active == NULL) {
+		isi->active = buf;
+		start_dma(isi, buf);
+	}
+	spin_unlock_irqrestore(&isi->lock, flags);
+}
+
+static int start_streaming(struct vb2_queue *vq)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+
+	u32 sr = 0;
+	int ret;
+
+	spin_lock_irq(&isi->lock);
+	isi->state = ISI_STATE_IDLE;
+	/* Clear any pending SOF interrupt */
+	sr = isi_readl(isi, ISI_STATUS);
+	/* Enable VSYNC interrupt for SOF */
+	isi_writel(isi, ISI_INTEN, ISI_SR_VSYNC);
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_EN);
+	spin_unlock_irq(&isi->lock);
+
+	dev_dbg(icd->parent, "Waiting for SOF\n");
+	ret = wait_event_interruptible(isi->vsync_wq,
+				       isi->state != ISI_STATE_IDLE);
+	if (ret)
+		return ret;
+
+	if (isi->state != ISI_STATE_READY)
+		return -EIO;
+
+	spin_lock_irq(&isi->lock);
+	isi->state = ISI_STATE_WAIT_SOF;
+	isi_writel(isi, ISI_INTDIS, ISI_SR_VSYNC);
+	spin_unlock_irq(&isi->lock);
+
+	return 0;
+}
+
+/* abort streaming and wait for last buffer */
+static int stop_streaming(struct vb2_queue *vq)
+{
+	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct frame_buffer *buf, *node;
+	int ret = 0;
+	unsigned long timeout;
+
+	spin_lock_irq(&isi->lock);
+	isi->active = NULL;
+	/* Release all active buffers */
+	list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) {
+		list_del_init(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irq(&isi->lock);
+
+	timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ;
+	/* Wait until the end of the current frame. */
+	while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) &&
+			time_before(jiffies, timeout))
+		msleep(1);
+
+	if (time_after(jiffies, timeout)) {
+		dev_err(icd->parent,
+			"Timeout waiting for finishing codec request\n");
+		return -ETIMEDOUT;
+	}
+
+	/* Disable interrupts */
+	isi_writel(isi, ISI_INTDIS,
+			ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
+
+	/* Disable ISI and wait for it is done */
+	ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
+	if (ret < 0)
+		dev_err(icd->parent, "Disable ISI timed out\n");
+
+	return ret;
+}
+
+static struct vb2_ops isi_video_qops = {
+	.queue_setup		= queue_setup,
+	.buf_init		= buffer_init,
+	.buf_prepare		= buffer_prepare,
+	.buf_cleanup		= buffer_cleanup,
+	.buf_queue		= buffer_queue,
+	.start_streaming	= start_streaming,
+	.stop_streaming		= stop_streaming,
+	.wait_prepare		= soc_camera_unlock,
+	.wait_finish		= soc_camera_lock,
+};
+
+/* ------------------------------------------------------------------
+	SOC camera operations for the device
+   ------------------------------------------------------------------*/
+static int isi_camera_init_videobuf(struct vb2_queue *q,
+				     struct soc_camera_device *icd)
+{
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP;
+	q->drv_priv = icd;
+	q->buf_struct_size = sizeof(struct frame_buffer);
+	q->ops = &isi_video_qops;
+	q->mem_ops = &vb2_dma_contig_memops;
+
+	return vb2_queue_init(q);
+}
+
+static int isi_camera_set_fmt(struct soc_camera_device *icd,
+			      struct v4l2_format *f)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
+	if (!xlate) {
+		dev_warn(icd->parent, "Format %x not found\n",
+			 pix->pixelformat);
+		return -EINVAL;
+	}
+
+	dev_dbg(icd->parent, "Plan to set format %dx%d\n",
+			pix->width, pix->height);
+
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	if (mf.code != xlate->code)
+		return -EINVAL;
+
+	ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
+	if (ret < 0)
+		return ret;
+
+	pix->width		= mf.width;
+	pix->height		= mf.height;
+	pix->field		= mf.field;
+	pix->colorspace		= mf.colorspace;
+	icd->current_fmt	= xlate;
+
+	dev_dbg(icd->parent, "Finally set format %dx%d\n",
+		pix->width, pix->height);
+
+	return ret;
+}
+
+static int isi_camera_try_fmt(struct soc_camera_device *icd,
+			      struct v4l2_format *f)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	const struct soc_camera_format_xlate *xlate;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	struct v4l2_mbus_framefmt mf;
+	u32 pixfmt = pix->pixelformat;
+	int ret;
+
+	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+	if (pixfmt && !xlate) {
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
+		return -EINVAL;
+	}
+
+	/* limit to Atmel ISI hardware capabilities */
+	if (pix->height > MAX_SUPPORT_HEIGHT)
+		pix->height = MAX_SUPPORT_HEIGHT;
+	if (pix->width > MAX_SUPPORT_WIDTH)
+		pix->width = MAX_SUPPORT_WIDTH;
+
+	/* limit to sensor capabilities */
+	mf.width	= pix->width;
+	mf.height	= pix->height;
+	mf.field	= pix->field;
+	mf.colorspace	= pix->colorspace;
+	mf.code		= xlate->code;
+
+	ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf);
+	if (ret < 0)
+		return ret;
+
+	pix->width	= mf.width;
+	pix->height	= mf.height;
+	pix->colorspace	= mf.colorspace;
+
+	switch (mf.field) {
+	case V4L2_FIELD_ANY:
+		pix->field = V4L2_FIELD_NONE;
+		break;
+	case V4L2_FIELD_NONE:
+		break;
+	default:
+		dev_err(icd->parent, "Field type %d unsupported.\n",
+			mf.field);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct soc_mbus_pixelfmt isi_camera_formats[] = {
+	{
+		.fourcc			= V4L2_PIX_FMT_YUYV,
+		.name			= "Packed YUV422 16 bit",
+		.bits_per_sample	= 8,
+		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
+		.order			= SOC_MBUS_ORDER_LE,
+	},
+};
+
+/* This will be corrected as we get more formats */
+static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
+{
+	return	fmt->packing == SOC_MBUS_PACKING_NONE ||
+		(fmt->bits_per_sample == 8 &&
+		 fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
+		(fmt->bits_per_sample > 8 &&
+		 fmt->packing == SOC_MBUS_PACKING_EXTEND16);
+}
+
+static unsigned long make_bus_param(struct atmel_isi *isi)
+{
+	unsigned long flags;
+	/*
+	 * Platform specified synchronization and pixel clock polarities are
+	 * only a recommendation and are only used during probing. Atmel ISI
+	 * camera interface only works in master mode, i.e., uses HSYNC and
+	 * VSYNC signals from the sensor
+	 */
+	flags = SOCAM_MASTER |
+		SOCAM_HSYNC_ACTIVE_HIGH |
+		SOCAM_HSYNC_ACTIVE_LOW |
+		SOCAM_VSYNC_ACTIVE_HIGH |
+		SOCAM_VSYNC_ACTIVE_LOW |
+		SOCAM_PCLK_SAMPLE_RISING |
+		SOCAM_PCLK_SAMPLE_FALLING |
+		SOCAM_DATA_ACTIVE_HIGH;
+
+	if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10)
+		flags |= SOCAM_DATAWIDTH_10;
+
+	if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8)
+		flags |= SOCAM_DATAWIDTH_8;
+
+	if (flags & SOCAM_DATAWIDTH_MASK)
+		return flags;
+
+	return 0;
+}
+
+static int isi_camera_try_bus_param(struct soc_camera_device *icd,
+				    unsigned char buswidth)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long camera_flags;
+	int ret;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+	ret = soc_camera_bus_param_compatible(camera_flags,
+					make_bus_param(isi));
+	if (!ret)
+		return -EINVAL;
+	return 0;
+}
+
+
+static int isi_camera_get_formats(struct soc_camera_device *icd,
+				  unsigned int idx,
+				  struct soc_camera_format_xlate *xlate)
+{
+	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+	int formats = 0, ret;
+	/* sensor format */
+	enum v4l2_mbus_pixelcode code;
+	/* soc camera host format */
+	const struct soc_mbus_pixelfmt *fmt;
+
+	ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code);
+	if (ret < 0)
+		/* No more formats */
+		return 0;
+
+	fmt = soc_mbus_get_fmtdesc(code);
+	if (!fmt) {
+		dev_err(icd->parent,
+			"Invalid format code #%u: %d\n", idx, code);
+		return 0;
+	}
+
+	/* This also checks support for the requested bits-per-sample */
+	ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample);
+	if (ret < 0) {
+		dev_err(icd->parent,
+			"Fail to try the bus parameters.\n");
+		return 0;
+	}
+
+	switch (code) {
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+	case V4L2_MBUS_FMT_VYUY8_2X8:
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+	case V4L2_MBUS_FMT_YVYU8_2X8:
+		formats++;
+		if (xlate) {
+			xlate->host_fmt	= &isi_camera_formats[0];
+			xlate->code	= code;
+			xlate++;
+			dev_dbg(icd->parent, "Providing format %s using code %d\n",
+				isi_camera_formats[0].name, code);
+		}
+		break;
+	default:
+		if (!isi_camera_packing_supported(fmt))
+			return 0;
+		if (xlate)
+			dev_dbg(icd->parent,
+				"Providing format %s in pass-through mode\n",
+				fmt->name);
+	}
+
+	/* Generic pass-through */
+	formats++;
+	if (xlate) {
+		xlate->host_fmt	= fmt;
+		xlate->code	= code;
+		xlate++;
+	}
+
+	return formats;
+}
+
+/* Called with .video_lock held */
+static int isi_camera_add_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	int ret;
+
+	if (isi->icd)
+		return -EBUSY;
+
+	ret = clk_enable(isi->pclk);
+	if (ret)
+		return ret;
+
+	isi->icd = icd;
+	dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
+		 icd->devnum);
+	return 0;
+}
+/* Called with .video_lock held */
+static void isi_camera_remove_device(struct soc_camera_device *icd)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+
+	BUG_ON(icd != isi->icd);
+
+	clk_disable(isi->pclk);
+	isi->icd = NULL;
+
+	dev_dbg(icd->parent, "Atmel ISI Camera driver detached from camera %d\n",
+		 icd->devnum);
+}
+
+static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
+{
+	struct soc_camera_device *icd = file->private_data;
+
+	return vb2_poll(&icd->vb2_vidq, file, pt);
+}
+
+static int isi_camera_querycap(struct soc_camera_host *ici,
+			       struct v4l2_capability *cap)
+{
+	strcpy(cap->driver, "atmel-isi");
+	strcpy(cap->card, "Atmel Image Sensor Interface");
+	cap->capabilities = (V4L2_CAP_VIDEO_CAPTURE |
+				V4L2_CAP_STREAMING);
+	return 0;
+}
+
+static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt)
+{
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+	struct atmel_isi *isi = ici->priv;
+	unsigned long bus_flags, camera_flags, common_flags;
+	int ret;
+	u32 cfg1 = 0;
+
+	camera_flags = icd->ops->query_bus_param(icd);
+
+	bus_flags = make_bus_param(isi);
+	common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
+	dev_dbg(icd->parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
+		camera_flags, bus_flags, common_flags);
+	if (!common_flags)
+		return -EINVAL;
+
+	/* Make choises, based on platform preferences */
+	if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+		if (isi->pdata->hsync_act_low)
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+		else
+			common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+	}
+
+	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
+	    (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+		if (isi->pdata->vsync_act_low)
+			common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+		else
+			common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+	}
+
+	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+	    (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+		if (isi->pdata->pclk_act_falling)
+			common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+		else
+			common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+	}
+
+	ret = icd->ops->set_bus_param(icd, common_flags);
+	if (ret < 0) {
+		dev_dbg(icd->parent, "Camera set_bus_param(%lx) returned %d\n",
+			common_flags, ret);
+		return ret;
+	}
+
+	/* set bus param for ISI */
+	if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+		cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
+	if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+		cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
+	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+		cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
+
+	if (isi->pdata->has_emb_sync)
+		cfg1 |= ISI_CFG1_EMB_SYNC;
+	if (isi->pdata->isi_full_mode)
+		cfg1 |= ISI_CFG1_FULL_MODE;
+
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+	isi_writel(isi, ISI_CFG1, cfg1);
+
+	return 0;
+}
+
+static struct soc_camera_host_ops isi_soc_camera_host_ops = {
+	.owner		= THIS_MODULE,
+	.add		= isi_camera_add_device,
+	.remove		= isi_camera_remove_device,
+	.set_fmt	= isi_camera_set_fmt,
+	.try_fmt	= isi_camera_try_fmt,
+	.get_formats	= isi_camera_get_formats,
+	.init_videobuf2	= isi_camera_init_videobuf,
+	.poll		= isi_camera_poll,
+	.querycap	= isi_camera_querycap,
+	.set_bus_param	= isi_camera_set_bus_param,
+};
+
+/* -----------------------------------------------------------------------*/
+static int __devexit atmel_isi_remove(struct platform_device *pdev)
+{
+	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
+	struct atmel_isi *isi = container_of(soc_host,
+					struct atmel_isi, soc_host);
+
+	free_irq(isi->irq, isi);
+	soc_camera_host_unregister(soc_host);
+	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
+	dma_free_coherent(&pdev->dev,
+			sizeof(struct fbd) * MAX_BUFFER_NUM,
+			isi->p_fb_descriptors,
+			isi->fb_descriptors_phys);
+
+	iounmap(isi->regs);
+	clk_put(isi->pclk);
+	kfree(isi);
+
+	return 0;
+}
+
+static int __devinit atmel_isi_probe(struct platform_device *pdev)
+{
+	unsigned int irq;
+	struct atmel_isi *isi;
+	struct clk *pclk;
+	struct resource *regs;
+	int ret, i;
+	struct device *dev = &pdev->dev;
+	struct soc_camera_host *soc_host;
+	struct isi_platform_data *pdata;
+
+	pdata = dev->platform_data;
+	if (!pdata || !pdata->data_width_flags) {
+		dev_err(&pdev->dev,
+			"No config available for Atmel ISI\n");
+		return -EINVAL;
+	}
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	pclk = clk_get(&pdev->dev, "isi_clk");
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+
+	isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL);
+	if (!isi) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Can't allocate interface!\n");
+		goto err_alloc_isi;
+	}
+
+	isi->pclk = pclk;
+	isi->pdata = pdata;
+	isi->active = NULL;
+	spin_lock_init(&isi->lock);
+	init_waitqueue_head(&isi->vsync_wq);
+	INIT_LIST_HEAD(&isi->video_buffer_list);
+	INIT_LIST_HEAD(&isi->dma_desc_head);
+
+	isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
+				sizeof(struct fbd) * MAX_BUFFER_NUM,
+				&isi->fb_descriptors_phys,
+				GFP_KERNEL);
+	if (!isi->p_fb_descriptors) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Can't allocate descriptors!\n");
+		goto err_alloc_descriptors;
+	}
+
+	for (i = 0; i < MAX_BUFFER_NUM; i++) {
+		isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i;
+		isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys +
+					i * sizeof(struct fbd);
+		list_add(&isi->dma_desc[i].list, &isi->dma_desc_head);
+	}
+
+	isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
+	if (IS_ERR(isi->alloc_ctx)) {
+		ret = PTR_ERR(isi->alloc_ctx);
+		goto err_alloc_ctx;
+	}
+
+	isi->regs = ioremap(regs->start, resource_size(regs));
+	if (!isi->regs) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_req_irq;
+	}
+
+	ret = request_irq(irq, isi_interrupt, 0, "isi", isi);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+		goto err_req_irq;
+	}
+	isi->irq = irq;
+
+	soc_host		= &isi->soc_host;
+	soc_host->drv_name	= "isi-camera";
+	soc_host->ops		= &isi_soc_camera_host_ops;
+	soc_host->priv		= isi;
+	soc_host->v4l2_dev.dev	= &pdev->dev;
+	soc_host->nr		= pdev->id;
+
+	ret = soc_camera_host_register(soc_host);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to register soc camera host\n");
+		goto err_register_soc_camera_host;
+	}
+	return 0;
+
+err_register_soc_camera_host:
+	free_irq(isi->irq, isi);
+err_req_irq:
+	iounmap(isi->regs);
+err_ioremap:
+	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
+err_alloc_ctx:
+	dma_free_coherent(&pdev->dev,
+			sizeof(struct fbd) * MAX_BUFFER_NUM,
+			isi->p_fb_descriptors,
+			isi->fb_descriptors_phys);
+err_alloc_descriptors:
+	kfree(isi);
+err_alloc_isi:
+	clk_put(isi->pclk);
+
+	return ret;
+}
+
+static struct platform_driver atmel_isi_driver = {
+	.probe		= atmel_isi_probe,
+	.remove		= __devexit_p(atmel_isi_remove),
+	.driver		= {
+		.name = "atmel_isi",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init atmel_isi_init_module(void)
+{
+	return  platform_driver_probe(&atmel_isi_driver, &atmel_isi_probe);
+}
+
+static void __exit atmel_isi_exit(void)
+{
+	platform_driver_unregister(&atmel_isi_driver);
+}
+module_init(atmel_isi_init_module);
+module_exit(atmel_isi_exit);
+
+MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>");
+MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("video");
diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index ca342e4c61f..1e4ce5068ec 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -292,3 +292,4 @@ module_exit(au0828_exit);
 MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
 MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.2");
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index c03eb29a9ee..0b3e481ffe8 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -33,7 +33,6 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/suspend.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
@@ -43,8 +42,6 @@
 
 static DEFINE_MUTEX(au0828_sysfs_lock);
 
-#define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1)
-
 /* ------------------------------------------------------------------
 	Videobuf operations
    ------------------------------------------------------------------*/
@@ -1254,8 +1251,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, dev->board.name, sizeof(cap->card));
 	strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info));
 
-	cap->version = AU0828_VERSION_CODE;
-
 	/*set the device capabilities */
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE |
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 3c9e6c7e7b5..5b15f63bf06 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2892,13 +2892,10 @@ void __devinit bttv_idcard(struct bttv *btv)
 {
 	unsigned int gpiobits;
 	int i,type;
-	unsigned short tmp;
 
 	/* read PCI subsystem ID */
-	pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
-	btv->cardid = tmp << 16;
-	pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
-	btv->cardid |= tmp;
+	btv->cardid  = btv->c.pci->subsystem_device << 16;
+	btv->cardid |= btv->c.pci->subsystem_vendor;
 
 	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
 		/* look for the card */
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 834a48394bc..14444de67d5 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -57,6 +57,7 @@
 
 #include <media/saa6588.h>
 
+#define BTTV_VERSION "0.9.19"
 
 unsigned int bttv_num;			/* number of Bt848s in use */
 struct bttv *bttvs[BTTV_MAX];
@@ -163,6 +164,7 @@ MODULE_PARM_DESC(radio_nr, "radio device numbers");
 MODULE_DESCRIPTION("bttv - v4l/v4l2 driver module for bt848/878 based cards");
 MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(BTTV_VERSION);
 
 /* ----------------------------------------------------------------------- */
 /* sysfs                                                                   */
@@ -2616,7 +2618,6 @@ static int bttv_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, btv->video_dev->name, sizeof(cap->card));
 	snprintf(cap->bus_info, sizeof(cap->bus_info),
 		 "PCI:%s", pci_name(btv->c.pci));
-	cap->version = BTTV_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE |
@@ -3416,7 +3417,6 @@ static int radio_querycap(struct file *file, void *priv,
 	strcpy(cap->driver, "bttv");
 	strlcpy(cap->card, btv->radio_dev->name, sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(btv->c.pci));
-	cap->version = BTTV_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 
 	return 0;
@@ -4585,14 +4585,8 @@ static int __init bttv_init_module(void)
 
 	bttv_num = 0;
 
-	printk(KERN_INFO "bttv: driver version %d.%d.%d loaded\n",
-	       (BTTV_VERSION_CODE >> 16) & 0xff,
-	       (BTTV_VERSION_CODE >> 8) & 0xff,
-	       BTTV_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "bttv: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "bttv: driver version %s loaded\n",
+	       BTTV_VERSION);
 	if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
 		gbuffers = 2;
 	if (gbufsize > BTTV_MAX_FBUF)
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 9b776faf074..318edf2830b 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -25,9 +25,6 @@
 #ifndef _BTTVP_H_
 #define _BTTVP_H_
 
-#include <linux/version.h>
-#define BTTV_VERSION_CODE KERNEL_VERSION(0,9,18)
-
 #include <linux/types.h>
 #include <linux/wait.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index c1193506131..f09df9dffaa 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -71,7 +71,6 @@ OTHER DEALINGS IN THE SOFTWARE.
 #include <linux/mm.h>
 #include <linux/parport.h>
 #include <linux/sched.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
@@ -647,7 +646,6 @@ static int qcam_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 2);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
@@ -895,6 +893,7 @@ static struct qcam *qcam_init(struct parport *port)
 
 	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
 		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		kfree(qcam);
 		return NULL;
 	}
 
@@ -1092,3 +1091,4 @@ module_init(init_bw_qcams);
 module_exit(exit_bw_qcams);
 
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.3");
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 24fc00965a1..cd8ff047318 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -35,7 +35,6 @@
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/jiffies.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <asm/uaccess.h>
 #include <media/v4l2-device.h>
@@ -517,7 +516,6 @@ static int qcam_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 3);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
@@ -752,6 +750,7 @@ static struct qcam *qcam_init(struct parport *port)
 
 	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
 		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		kfree(qcam);
 		return NULL;
 	}
 
@@ -886,6 +885,7 @@ static void __exit cqcam_cleanup(void)
 MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
 MODULE_DESCRIPTION(BANNER);
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.4");
 
 module_init(cqcam_init);
 module_exit(cqcam_cleanup);
diff --git a/drivers/media/video/cafe_ccic-regs.h b/drivers/media/video/cafe_ccic-regs.h
deleted file mode 100644
index 8e2a87cdc79..00000000000
--- a/drivers/media/video/cafe_ccic-regs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Register definitions for the m88alp01 camera interface.  Offsets in bytes
- * as given in the spec.
- *
- * Copyright 2006 One Laptop Per Child Association, Inc.
- *
- * Written by Jonathan Corbet, corbet@lwn.net.
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-#define REG_Y0BAR	0x00
-#define REG_Y1BAR	0x04
-#define REG_Y2BAR	0x08
-/* ... */
-
-#define REG_IMGPITCH	0x24	/* Image pitch register */
-#define   IMGP_YP_SHFT	  2		/* Y pitch params */
-#define   IMGP_YP_MASK	  0x00003ffc	/* Y pitch field */
-#define	  IMGP_UVP_SHFT	  18		/* UV pitch (planar) */
-#define   IMGP_UVP_MASK   0x3ffc0000
-#define REG_IRQSTATRAW	0x28	/* RAW IRQ Status */
-#define   IRQ_EOF0	  0x00000001	/* End of frame 0 */
-#define   IRQ_EOF1	  0x00000002	/* End of frame 1 */
-#define   IRQ_EOF2	  0x00000004	/* End of frame 2 */
-#define   IRQ_SOF0	  0x00000008	/* Start of frame 0 */
-#define   IRQ_SOF1	  0x00000010	/* Start of frame 1 */
-#define   IRQ_SOF2	  0x00000020	/* Start of frame 2 */
-#define   IRQ_OVERFLOW	  0x00000040	/* FIFO overflow */
-#define   IRQ_TWSIW	  0x00010000	/* TWSI (smbus) write */
-#define   IRQ_TWSIR	  0x00020000	/* TWSI read */
-#define   IRQ_TWSIE	  0x00040000	/* TWSI error */
-#define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
-#define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
-#define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
-#define REG_IRQMASK	0x2c	/* IRQ mask - same bits as IRQSTAT */
-#define REG_IRQSTAT	0x30	/* IRQ status / clear */
-
-#define REG_IMGSIZE	0x34	/* Image size */
-#define  IMGSZ_V_MASK	  0x1fff0000
-#define  IMGSZ_V_SHIFT	  16
-#define	 IMGSZ_H_MASK	  0x00003fff
-#define REG_IMGOFFSET	0x38	/* IMage offset */
-
-#define REG_CTRL0	0x3c	/* Control 0 */
-#define   C0_ENABLE	  0x00000001	/* Makes the whole thing go */
-
-/* Mask for all the format bits */
-#define   C0_DF_MASK	  0x00fffffc    /* Bits 2-23 */
-
-/* RGB ordering */
-#define   C0_RGB4_RGBX	  0x00000000
-#define	  C0_RGB4_XRGB	  0x00000004
-#define	  C0_RGB4_BGRX	  0x00000008
-#define   C0_RGB4_XBGR	  0x0000000c
-#define   C0_RGB5_RGGB	  0x00000000
-#define	  C0_RGB5_GRBG	  0x00000004
-#define	  C0_RGB5_GBRG	  0x00000008
-#define   C0_RGB5_BGGR	  0x0000000c
-
-/* Spec has two fields for DIN and DOUT, but they must match, so
-   combine them here. */
-#define   C0_DF_YUV	  0x00000000    /* Data is YUV	    */
-#define   C0_DF_RGB	  0x000000a0	/* ... RGB		    */
-#define   C0_DF_BAYER     0x00000140	/* ... Bayer                */
-/* 8-8-8 must be missing from the below - ask */
-#define   C0_RGBF_565	  0x00000000
-#define   C0_RGBF_444	  0x00000800
-#define   C0_RGB_BGR	  0x00001000	/* Blue comes first */
-#define   C0_YUV_PLANAR	  0x00000000	/* YUV 422 planar format */
-#define   C0_YUV_PACKED	  0x00008000	/* YUV 422 packed	*/
-#define   C0_YUV_420PL	  0x0000a000	/* YUV 420 planar	*/
-/* Think that 420 packed must be 111 - ask */
-#define	  C0_YUVE_YUYV	  0x00000000	/* Y1CbY0Cr 		*/
-#define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb 		*/
-#define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0 		*/
-#define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0 		*/
-#define   C0_YUVE_XYUV	  0x00000000    /* 420: .YUV		*/
-#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU 		*/
-#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY 		*/
-#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY 		*/
-/* Bayer bits 18,19 if needed */
-#define   C0_HPOL_LOW	  0x01000000	/* HSYNC polarity active low */
-#define   C0_VPOL_LOW	  0x02000000	/* VSYNC polarity active low */
-#define   C0_VCLK_LOW	  0x04000000	/* VCLK on falling edge */
-#define   C0_DOWNSCALE	  0x08000000	/* Enable downscaler */
-#define	  C0_SIFM_MASK	  0xc0000000	/* SIF mode bits */
-#define   C0_SIF_HVSYNC	  0x00000000	/* Use H/VSYNC */
-#define   CO_SOF_NOSYNC	  0x40000000	/* Use inband active signaling */
-
-
-#define REG_CTRL1	0x40	/* Control 1 */
-#define   C1_444ALPHA	  0x00f00000	/* Alpha field in RGB444 */
-#define   C1_ALPHA_SHFT	  20
-#define   C1_DMAB32	  0x00000000	/* 32-byte DMA burst */
-#define   C1_DMAB16	  0x02000000	/* 16-byte DMA burst */
-#define	  C1_DMAB64	  0x04000000	/* 64-byte DMA burst */
-#define	  C1_DMAB_MASK	  0x06000000
-#define   C1_TWOBUFS	  0x08000000	/* Use only two DMA buffers */
-#define   C1_PWRDWN	  0x10000000	/* Power down */
-
-#define REG_CLKCTRL	0x88	/* Clock control */
-#define   CLK_DIV_MASK	  0x0000ffff	/* Upper bits RW "reserved" */
-
-#define REG_GPR		0xb4	/* General purpose register.  This
-				   controls inputs to the power and reset
-				   pins on the OV7670 used with OLPC;
-				   other deployments could differ.  */
-#define   GPR_C1EN	  0x00000020	/* Pad 1 (power down) enable */
-#define   GPR_C0EN	  0x00000010	/* Pad 0 (reset) enable */
-#define	  GPR_C1	  0x00000002	/* Control 1 value */
-/*
- * Control 0 is wired to reset on OLPC machines.  For ov7x sensors,
- * it is active low, for 0v6x, instead, it's active high.  What
- * fun.
- */
-#define   GPR_C0	  0x00000001	/* Control 0 value */
-
-#define REG_TWSIC0	0xb8	/* TWSI (smbus) control 0 */
-#define   TWSIC0_EN       0x00000001	/* TWSI enable */
-#define   TWSIC0_MODE	  0x00000002	/* 1 = 16-bit, 0 = 8-bit */
-#define   TWSIC0_SID	  0x000003fc	/* Slave ID */
-#define   TWSIC0_SID_SHIFT 2
-#define   TWSIC0_CLKDIV   0x0007fc00	/* Clock divider */
-#define   TWSIC0_MASKACK  0x00400000	/* Mask ack from sensor */
-#define   TWSIC0_OVMAGIC  0x00800000	/* Make it work on OV sensors */
-
-#define REG_TWSIC1	0xbc	/* TWSI control 1 */
-#define   TWSIC1_DATA	  0x0000ffff	/* Data to/from camchip */
-#define   TWSIC1_ADDR	  0x00ff0000	/* Address (register) */
-#define   TWSIC1_ADDR_SHIFT 16
-#define   TWSIC1_READ	  0x01000000	/* Set for read op */
-#define   TWSIC1_WSTAT	  0x02000000	/* Write status */
-#define   TWSIC1_RVALID	  0x04000000	/* Read data valid */
-#define   TWSIC1_ERROR	  0x08000000	/* Something screwed up */
-
-
-#define REG_UBAR	0xc4	/* Upper base address register */
-
-/*
- * Here's the weird global control registers which are said to live
- * way up here.
- */
-#define REG_GL_CSR     0x3004  /* Control/status register */
-#define   GCSR_SRS	 0x00000001	/* SW Reset set */
-#define   GCSR_SRC  	 0x00000002	/* SW Reset clear */
-#define	  GCSR_MRS	 0x00000004	/* Master reset set */
-#define	  GCSR_MRC	 0x00000008	/* HW Reset clear */
-#define   GCSR_CCIC_EN   0x00004000    /* CCIC Clock enable */
-#define REG_GL_IMASK   0x300c  /* Interrupt mask register */
-#define   GIMSK_CCIC_EN          0x00000004    /* CCIC Interrupt enable */
-
-#define REG_GL_FCR	0x3038  /* GPIO functional control register */
-#define	  GFCR_GPIO_ON	  0x08		/* Camera GPIO enabled */
-#define REG_GL_GPIOR	0x315c	/* GPIO register */
-#define   GGPIO_OUT  		0x80000	/* GPIO output */
-#define   GGPIO_VAL  		0x00008	/* Output pin value */
-
-#define REG_LEN                REG_GL_IMASK + 4
-
-
-/*
- * Useful stuff that probably belongs somewhere global.
- */
-#define VGA_WIDTH	640
-#define VGA_HEIGHT	480
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
deleted file mode 100644
index 66470339849..00000000000
--- a/drivers/media/video/cafe_ccic.c
+++ /dev/null
@@ -1,2267 +0,0 @@
-/*
- * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe"
- * multifunction chip.  Currently works with the Omnivision OV7670
- * sensor.
- *
- * The data sheet for this device can be found at:
- *    http://www.marvell.com/products/pc_connectivity/88alp01/ 
- *
- * Copyright 2006 One Laptop Per Child Association, Inc.
- * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
- *
- * Written by Jonathan Corbet, corbet@lwn.net.
- *
- * v4l2_device/v4l2_subdev conversion by:
- * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl>
- *
- * Note: this conversion is untested! Please contact the linux-media
- * mailinglist if you can test this, together with the test results.
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/dmi.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-chip-ident.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/vmalloc.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include "ov7670.h"
-#include "cafe_ccic-regs.h"
-
-#define CAFE_VERSION 0x000002
-
-
-/*
- * Parameters.
- */
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
-MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("Video");
-
-/*
- * Internal DMA buffer management.  Since the controller cannot do S/G I/O,
- * we must have physically contiguous buffers to bring frames into.
- * These parameters control how many buffers we use, whether we
- * allocate them at load time (better chance of success, but nails down
- * memory) or when somebody tries to use the camera (riskier), and,
- * for load-time allocation, how big they should be.
- *
- * The controller can cycle through three buffers.  We could use
- * more by flipping pointers around, but it probably makes little
- * sense.
- */
-
-#define MAX_DMA_BUFS 3
-static int alloc_bufs_at_read;
-module_param(alloc_bufs_at_read, bool, 0444);
-MODULE_PARM_DESC(alloc_bufs_at_read,
-		"Non-zero value causes DMA buffers to be allocated when the "
-		"video capture device is read, rather than at module load "
-		"time.  This saves memory, but decreases the chances of "
-		"successfully getting those buffers.");
-
-static int n_dma_bufs = 3;
-module_param(n_dma_bufs, uint, 0644);
-MODULE_PARM_DESC(n_dma_bufs,
-		"The number of DMA buffers to allocate.  Can be either two "
-		"(saves memory, makes timing tighter) or three.");
-
-static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2;  /* Worst case */
-module_param(dma_buf_size, uint, 0444);
-MODULE_PARM_DESC(dma_buf_size,
-		"The size of the allocated DMA buffers.  If actual operating "
-		"parameters require larger buffers, an attempt to reallocate "
-		"will be made.");
-
-static int min_buffers = 1;
-module_param(min_buffers, uint, 0644);
-MODULE_PARM_DESC(min_buffers,
-		"The minimum number of streaming I/O buffers we are willing "
-		"to work with.");
-
-static int max_buffers = 10;
-module_param(max_buffers, uint, 0644);
-MODULE_PARM_DESC(max_buffers,
-		"The maximum number of streaming I/O buffers an application "
-		"will be allowed to allocate.  These buffers are big and live "
-		"in vmalloc space.");
-
-static int flip;
-module_param(flip, bool, 0444);
-MODULE_PARM_DESC(flip,
-		"If set, the sensor will be instructed to flip the image "
-		"vertically.");
-
-
-enum cafe_state {
-	S_NOTREADY,	/* Not yet initialized */
-	S_IDLE,		/* Just hanging around */
-	S_FLAKED,	/* Some sort of problem */
-	S_SINGLEREAD,	/* In read() */
-	S_SPECREAD,   	/* Speculative read (for future read()) */
-	S_STREAMING	/* Streaming data */
-};
-
-/*
- * Tracking of streaming I/O buffers.
- */
-struct cafe_sio_buffer {
-	struct list_head list;
-	struct v4l2_buffer v4lbuf;
-	char *buffer;   /* Where it lives in kernel space */
-	int mapcount;
-	struct cafe_camera *cam;
-};
-
-/*
- * A description of one of our devices.
- * Locking: controlled by s_mutex.  Certain fields, however, require
- * 	    the dev_lock spinlock; they are marked as such by comments.
- *	    dev_lock is also required for access to device registers.
- */
-struct cafe_camera
-{
-	struct v4l2_device v4l2_dev;
-	enum cafe_state state;
-	unsigned long flags;   		/* Buffer status, mainly (dev_lock) */
-	int users;			/* How many open FDs */
-	struct file *owner;		/* Who has data access (v4l2) */
-
-	/*
-	 * Subsystem structures.
-	 */
-	struct pci_dev *pdev;
-	struct video_device vdev;
-	struct i2c_adapter i2c_adapter;
-	struct v4l2_subdev *sensor;
-	unsigned short sensor_addr;
-
-	unsigned char __iomem *regs;
-	struct list_head dev_list;	/* link to other devices */
-
-	/* DMA buffers */
-	unsigned int nbufs;		/* How many are alloc'd */
-	int next_buf;			/* Next to consume (dev_lock) */
-	unsigned int dma_buf_size;  	/* allocated size */
-	void *dma_bufs[MAX_DMA_BUFS];	/* Internal buffer addresses */
-	dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
-	unsigned int specframes;	/* Unconsumed spec frames (dev_lock) */
-	unsigned int sequence;		/* Frame sequence number */
-	unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual buffers */
-
-	/* Streaming buffers */
-	unsigned int n_sbufs;		/* How many we have */
-	struct cafe_sio_buffer *sb_bufs; /* The array of housekeeping structs */
-	struct list_head sb_avail;	/* Available for data (we own) (dev_lock) */
-	struct list_head sb_full;	/* With data (user space owns) (dev_lock) */
-	struct tasklet_struct s_tasklet;
-
-	/* Current operating parameters */
-	u32 sensor_type;		/* Currently ov7670 only */
-	struct v4l2_pix_format pix_format;
-	enum v4l2_mbus_pixelcode mbus_code;
-
-	/* Locks */
-	struct mutex s_mutex; /* Access to this structure */
-	spinlock_t dev_lock;  /* Access to device */
-
-	/* Misc */
-	wait_queue_head_t smbus_wait;	/* Waiting on i2c events */
-	wait_queue_head_t iowait;	/* Waiting on frame data */
-};
-
-/*
- * Status flags.  Always manipulated with bit operations.
- */
-#define CF_BUF0_VALID	 0	/* Buffers valid - first three */
-#define CF_BUF1_VALID	 1
-#define CF_BUF2_VALID	 2
-#define CF_DMA_ACTIVE	 3	/* A frame is incoming */
-#define CF_CONFIG_NEEDED 4	/* Must configure hardware */
-
-#define sensor_call(cam, o, f, args...) \
-	v4l2_subdev_call(cam->sensor, o, f, ##args)
-
-static inline struct cafe_camera *to_cam(struct v4l2_device *dev)
-{
-	return container_of(dev, struct cafe_camera, v4l2_dev);
-}
-
-static struct cafe_format_struct {
-	__u8 *desc;
-	__u32 pixelformat;
-	int bpp;   /* Bytes per pixel */
-	enum v4l2_mbus_pixelcode mbus_code;
-} cafe_formats[] = {
-	{
-		.desc		= "YUYV 4:2:2",
-		.pixelformat	= V4L2_PIX_FMT_YUYV,
-		.mbus_code	= V4L2_MBUS_FMT_YUYV8_2X8,
-		.bpp		= 2,
-	},
-	{
-		.desc		= "RGB 444",
-		.pixelformat	= V4L2_PIX_FMT_RGB444,
-		.mbus_code	= V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE,
-		.bpp		= 2,
-	},
-	{
-		.desc		= "RGB 565",
-		.pixelformat	= V4L2_PIX_FMT_RGB565,
-		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_LE,
-		.bpp		= 2,
-	},
-	{
-		.desc		= "Raw RGB Bayer",
-		.pixelformat	= V4L2_PIX_FMT_SBGGR8,
-		.mbus_code	= V4L2_MBUS_FMT_SBGGR8_1X8,
-		.bpp		= 1
-	},
-};
-#define N_CAFE_FMTS ARRAY_SIZE(cafe_formats)
-
-static struct cafe_format_struct *cafe_find_format(u32 pixelformat)
-{
-	unsigned i;
-
-	for (i = 0; i < N_CAFE_FMTS; i++)
-		if (cafe_formats[i].pixelformat == pixelformat)
-			return cafe_formats + i;
-	/* Not found? Then return the first format. */
-	return cafe_formats;
-}
-
-/*
- * Start over with DMA buffers - dev_lock needed.
- */
-static void cafe_reset_buffers(struct cafe_camera *cam)
-{
-	int i;
-
-	cam->next_buf = -1;
-	for (i = 0; i < cam->nbufs; i++)
-		clear_bit(i, &cam->flags);
-	cam->specframes = 0;
-}
-
-static inline int cafe_needs_config(struct cafe_camera *cam)
-{
-	return test_bit(CF_CONFIG_NEEDED, &cam->flags);
-}
-
-static void cafe_set_config_needed(struct cafe_camera *cam, int needed)
-{
-	if (needed)
-		set_bit(CF_CONFIG_NEEDED, &cam->flags);
-	else
-		clear_bit(CF_CONFIG_NEEDED, &cam->flags);
-}
-
-
-
-
-/*
- * Debugging and related.
- */
-#define cam_err(cam, fmt, arg...) \
-	dev_err(&(cam)->pdev->dev, fmt, ##arg);
-#define cam_warn(cam, fmt, arg...) \
-	dev_warn(&(cam)->pdev->dev, fmt, ##arg);
-#define cam_dbg(cam, fmt, arg...) \
-	dev_dbg(&(cam)->pdev->dev, fmt, ##arg);
-
-
-/* ---------------------------------------------------------------------*/
-
-/*
- * Device register I/O
- */
-static inline void cafe_reg_write(struct cafe_camera *cam, unsigned int reg,
-		unsigned int val)
-{
-	iowrite32(val, cam->regs + reg);
-}
-
-static inline unsigned int cafe_reg_read(struct cafe_camera *cam,
-		unsigned int reg)
-{
-	return ioread32(cam->regs + reg);
-}
-
-
-static inline void cafe_reg_write_mask(struct cafe_camera *cam, unsigned int reg,
-		unsigned int val, unsigned int mask)
-{
-	unsigned int v = cafe_reg_read(cam, reg);
-
-	v = (v & ~mask) | (val & mask);
-	cafe_reg_write(cam, reg, v);
-}
-
-static inline void cafe_reg_clear_bit(struct cafe_camera *cam,
-		unsigned int reg, unsigned int val)
-{
-	cafe_reg_write_mask(cam, reg, 0, val);
-}
-
-static inline void cafe_reg_set_bit(struct cafe_camera *cam,
-		unsigned int reg, unsigned int val)
-{
-	cafe_reg_write_mask(cam, reg, val, val);
-}
-
-
-
-/* -------------------------------------------------------------------- */
-/*
- * The I2C/SMBUS interface to the camera itself starts here.  The
- * controller handles SMBUS itself, presenting a relatively simple register
- * interface; all we have to do is to tell it where to route the data.
- */
-#define CAFE_SMBUS_TIMEOUT (HZ)  /* generous */
-
-static int cafe_smbus_write_done(struct cafe_camera *cam)
-{
-	unsigned long flags;
-	int c1;
-
-	/*
-	 * We must delay after the interrupt, or the controller gets confused
-	 * and never does give us good status.  Fortunately, we don't do this
-	 * often.
-	 */
-	udelay(20);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	c1 = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT;
-}
-
-static int cafe_smbus_write_data(struct cafe_camera *cam,
-		u16 addr, u8 command, u8 value)
-{
-	unsigned int rval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
-	rval |= TWSIC0_OVMAGIC;  /* Make OV sensors work */
-	/*
-	 * Marvell sez set clkdiv to all 1's for now.
-	 */
-	rval |= TWSIC0_CLKDIV;
-	cafe_reg_write(cam, REG_TWSIC0, rval);
-	(void) cafe_reg_read(cam, REG_TWSIC1); /* force write */
-	rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
-	cafe_reg_write(cam, REG_TWSIC1, rval);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	/* Unfortunately, reading TWSIC1 too soon after sending a command
-	 * causes the device to die.
-	 * Use a busy-wait because we often send a large quantity of small
-	 * commands at-once; using msleep() would cause a lot of context
-	 * switches which take longer than 2ms, resulting in a noticeable
-	 * boot-time and capture-start delays.
-	 */
-	mdelay(2);
-
-	/*
-	 * Another sad fact is that sometimes, commands silently complete but
-	 * cafe_smbus_write_done() never becomes aware of this.
-	 * This happens at random and appears to possible occur with any
-	 * command.
-	 * We don't understand why this is. We work around this issue
-	 * with the timeout in the wait below, assuming that all commands
-	 * complete within the timeout.
-	 */
-	wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(cam),
-			CAFE_SMBUS_TIMEOUT);
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	if (rval & TWSIC1_WSTAT) {
-		cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr,
-				command, value);
-		return -EIO;
-	}
-	if (rval & TWSIC1_ERROR) {
-		cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr,
-				command, value);
-		return -EIO;
-	}
-	return 0;
-}
-
-
-
-static int cafe_smbus_read_done(struct cafe_camera *cam)
-{
-	unsigned long flags;
-	int c1;
-
-	/*
-	 * We must delay after the interrupt, or the controller gets confused
-	 * and never does give us good status.  Fortunately, we don't do this
-	 * often.
-	 */
-	udelay(20);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	c1 = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return c1 & (TWSIC1_RVALID|TWSIC1_ERROR);
-}
-
-
-
-static int cafe_smbus_read_data(struct cafe_camera *cam,
-		u16 addr, u8 command, u8 *value)
-{
-	unsigned int rval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
-	rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
-	/*
-	 * Marvel sez set clkdiv to all 1's for now.
-	 */
-	rval |= TWSIC0_CLKDIV;
-	cafe_reg_write(cam, REG_TWSIC0, rval);
-	(void) cafe_reg_read(cam, REG_TWSIC1); /* force write */
-	rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
-	cafe_reg_write(cam, REG_TWSIC1, rval);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	wait_event_timeout(cam->smbus_wait,
-			cafe_smbus_read_done(cam), CAFE_SMBUS_TIMEOUT);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	rval = cafe_reg_read(cam, REG_TWSIC1);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	if (rval & TWSIC1_ERROR) {
-		cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command);
-		return -EIO;
-	}
-	if (! (rval & TWSIC1_RVALID)) {
-		cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr,
-				command);
-		return -EIO;
-	}
-	*value = rval & 0xff;
-	return 0;
-}
-
-/*
- * Perform a transfer over SMBUS.  This thing is called under
- * the i2c bus lock, so we shouldn't race with ourselves...
- */
-static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
-		unsigned short flags, char rw, u8 command,
-		int size, union i2c_smbus_data *data)
-{
-	struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-	int ret = -EINVAL;
-
-	/*
-	 * This interface would appear to only do byte data ops.  OK
-	 * it can do word too, but the cam chip has no use for that.
-	 */
-	if (size != I2C_SMBUS_BYTE_DATA) {
-		cam_err(cam, "funky xfer size %d\n", size);
-		return -EINVAL;
-	}
-
-	if (rw == I2C_SMBUS_WRITE)
-		ret = cafe_smbus_write_data(cam, addr, command, data->byte);
-	else if (rw == I2C_SMBUS_READ)
-		ret = cafe_smbus_read_data(cam, addr, command, &data->byte);
-	return ret;
-}
-
-
-static void cafe_smbus_enable_irq(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reg_set_bit(cam, REG_IRQMASK, TWSIIRQS);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-static u32 cafe_smbus_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_SMBUS_READ_BYTE_DATA  |
-	       I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
-}
-
-static struct i2c_algorithm cafe_smbus_algo = {
-	.smbus_xfer = cafe_smbus_xfer,
-	.functionality = cafe_smbus_func
-};
-
-/* Somebody is on the bus */
-static void cafe_ctlr_stop_dma(struct cafe_camera *cam);
-static void cafe_ctlr_power_down(struct cafe_camera *cam);
-
-static int cafe_smbus_setup(struct cafe_camera *cam)
-{
-	struct i2c_adapter *adap = &cam->i2c_adapter;
-	int ret;
-
-	cafe_smbus_enable_irq(cam);
-	adap->owner = THIS_MODULE;
-	adap->algo = &cafe_smbus_algo;
-	strcpy(adap->name, "cafe_ccic");
-	adap->dev.parent = &cam->pdev->dev;
-	i2c_set_adapdata(adap, &cam->v4l2_dev);
-	ret = i2c_add_adapter(adap);
-	if (ret)
-		printk(KERN_ERR "Unable to register cafe i2c adapter\n");
-	return ret;
-}
-
-static void cafe_smbus_shutdown(struct cafe_camera *cam)
-{
-	i2c_del_adapter(&cam->i2c_adapter);
-}
-
-
-/* ------------------------------------------------------------------- */
-/*
- * Deal with the controller.
- */
-
-/*
- * Do everything we think we need to have the interface operating
- * according to the desired format.
- */
-static void cafe_ctlr_dma(struct cafe_camera *cam)
-{
-	/*
-	 * Store the first two Y buffers (we aren't supporting
-	 * planar formats for now, so no UV bufs).  Then either
-	 * set the third if it exists, or tell the controller
-	 * to just use two.
-	 */
-	cafe_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]);
-	cafe_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]);
-	if (cam->nbufs > 2) {
-		cafe_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]);
-		cafe_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS);
-	}
-	else
-		cafe_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
-	cafe_reg_write(cam, REG_UBAR, 0); /* 32 bits only for now */
-}
-
-static void cafe_ctlr_image(struct cafe_camera *cam)
-{
-	int imgsz;
-	struct v4l2_pix_format *fmt = &cam->pix_format;
-
-	imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) |
-		(fmt->bytesperline & IMGSZ_H_MASK);
-	cafe_reg_write(cam, REG_IMGSIZE, imgsz);
-	cafe_reg_write(cam, REG_IMGOFFSET, 0);
-	/* YPITCH just drops the last two bits */
-	cafe_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline,
-			IMGP_YP_MASK);
-	/*
-	 * Tell the controller about the image format we are using.
-	 */
-	switch (cam->pix_format.pixelformat) {
-	case V4L2_PIX_FMT_YUYV:
-	    cafe_reg_write_mask(cam, REG_CTRL0,
-			    C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV,
-			    C0_DF_MASK);
-	    break;
-
-	case V4L2_PIX_FMT_RGB444:
-	    cafe_reg_write_mask(cam, REG_CTRL0,
-			    C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB,
-			    C0_DF_MASK);
-		/* Alpha value? */
-	    break;
-
-	case V4L2_PIX_FMT_RGB565:
-	    cafe_reg_write_mask(cam, REG_CTRL0,
-			    C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR,
-			    C0_DF_MASK);
-	    break;
-
-	default:
-	    cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat);
-	    break;
-	}
-	/*
-	 * Make sure it knows we want to use hsync/vsync.
-	 */
-	cafe_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC,
-			C0_SIFM_MASK);
-}
-
-
-/*
- * Configure the controller for operation; caller holds the
- * device mutex.
- */
-static int cafe_ctlr_configure(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_ctlr_dma(cam);
-	cafe_ctlr_image(cam);
-	cafe_set_config_needed(cam, 0);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return 0;
-}
-
-static void cafe_ctlr_irq_enable(struct cafe_camera *cam)
-{
-	/*
-	 * Clear any pending interrupts, since we do not
-	 * expect to have I/O active prior to enabling.
-	 */
-	cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS);
-	cafe_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS);
-}
-
-static void cafe_ctlr_irq_disable(struct cafe_camera *cam)
-{
-	cafe_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS);
-}
-
-/*
- * Make the controller start grabbing images.  Everything must
- * be set up before doing this.
- */
-static void cafe_ctlr_start(struct cafe_camera *cam)
-{
-	/* set_bit performs a read, so no other barrier should be
-	   needed here */
-	cafe_reg_set_bit(cam, REG_CTRL0, C0_ENABLE);
-}
-
-static void cafe_ctlr_stop(struct cafe_camera *cam)
-{
-	cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
-}
-
-static void cafe_ctlr_init(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	/*
-	 * Added magic to bring up the hardware on the B-Test board
-	 */
-	cafe_reg_write(cam, 0x3038, 0x8);
-	cafe_reg_write(cam, 0x315c, 0x80008);
-	/*
-	 * Go through the dance needed to wake the device up.
-	 * Note that these registers are global and shared
-	 * with the NAND and SD devices.  Interaction between the
-	 * three still needs to be examined.
-	 */
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRC);
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_SRC|GCSR_MRS);
-	/*
-	 * Here we must wait a bit for the controller to come around.
-	 */
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	msleep(5);
-	spin_lock_irqsave(&cam->dev_lock, flags);
-
-	cafe_reg_write(cam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC);
-	cafe_reg_set_bit(cam, REG_GL_IMASK, GIMSK_CCIC_EN);
-	/*
-	 * Make sure it's not powered down.
-	 */
-	cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
-	/*
-	 * Turn off the enable bit.  It sure should be off anyway,
-	 * but it's good to be sure.
-	 */
-	cafe_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
-	/*
-	 * Mask all interrupts.
-	 */
-	cafe_reg_write(cam, REG_IRQMASK, 0);
-	/*
-	 * Clock the sensor appropriately.  Controller clock should
-	 * be 48MHz, sensor "typical" value is half that.
-	 */
-	cafe_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-
-/*
- * Stop the controller, and don't return until we're really sure that no
- * further DMA is going on.
- */
-static void cafe_ctlr_stop_dma(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	/*
-	 * Theory: stop the camera controller (whether it is operating
-	 * or not).  Delay briefly just in case we race with the SOF
-	 * interrupt, then wait until no DMA is active.
-	 */
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_ctlr_stop(cam);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	mdelay(1);
-	wait_event_timeout(cam->iowait,
-			!test_bit(CF_DMA_ACTIVE, &cam->flags), HZ);
-	if (test_bit(CF_DMA_ACTIVE, &cam->flags))
-		cam_err(cam, "Timeout waiting for DMA to end\n");
-		/* This would be bad news - what now? */
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cam->state = S_IDLE;
-	cafe_ctlr_irq_disable(cam);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-/*
- * Power up and down.
- */
-static void cafe_ctlr_power_up(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
-	/*
-	 * Part one of the sensor dance: turn the global
-	 * GPIO signal on.
-	 */
-	cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON);
-	cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL);
-	/*
-	 * Put the sensor into operational mode (assumes OLPC-style
-	 * wiring).  Control 0 is reset - set to 1 to operate.
-	 * Control 1 is power down, set to 0 to operate.
-	 */
-	cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */
-/*	mdelay(1); */ /* Marvell says 1ms will do it */
-	cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
-/*	mdelay(1); */ /* Enough? */
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	msleep(5); /* Just to be sure */
-}
-
-static void cafe_ctlr_power_down(struct cafe_camera *cam)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
-	cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON);
-	cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT);
-	cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-/* -------------------------------------------------------------------- */
-/*
- * Communications with the sensor.
- */
-
-static int __cafe_cam_reset(struct cafe_camera *cam)
-{
-	return sensor_call(cam, core, reset, 0);
-}
-
-/*
- * We have found the sensor on the i2c.  Let's try to have a
- * conversation.
- */
-static int cafe_cam_init(struct cafe_camera *cam)
-{
-	struct v4l2_dbg_chip_ident chip;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_NOTREADY)
-		cam_warn(cam, "Cam init with device in funky state %d",
-				cam->state);
-	ret = __cafe_cam_reset(cam);
-	if (ret)
-		goto out;
-	chip.ident = V4L2_IDENT_NONE;
-	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
-	chip.match.addr = cam->sensor_addr;
-	ret = sensor_call(cam, core, g_chip_ident, &chip);
-	if (ret)
-		goto out;
-	cam->sensor_type = chip.ident;
-	if (cam->sensor_type != V4L2_IDENT_OV7670) {
-		cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type);
-		ret = -EINVAL;
-		goto out;
-	}
-/* Get/set parameters? */
-	ret = 0;
-	cam->state = S_IDLE;
-  out:
-	cafe_ctlr_power_down(cam);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-/*
- * Configure the sensor to match the parameters we have.  Caller should
- * hold s_mutex
- */
-static int cafe_cam_set_flip(struct cafe_camera *cam)
-{
-	struct v4l2_control ctrl;
-
-	memset(&ctrl, 0, sizeof(ctrl));
-	ctrl.id = V4L2_CID_VFLIP;
-	ctrl.value = flip;
-	return sensor_call(cam, core, s_ctrl, &ctrl);
-}
-
-
-static int cafe_cam_configure(struct cafe_camera *cam)
-{
-	struct v4l2_mbus_framefmt mbus_fmt;
-	int ret;
-
-	v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code);
-	ret = sensor_call(cam, core, init, 0);
-	if (ret == 0)
-		ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt);
-	/*
-	 * OV7670 does weird things if flip is set *before* format...
-	 */
-	ret += cafe_cam_set_flip(cam);
-	return ret;
-}
-
-/* -------------------------------------------------------------------- */
-/*
- * DMA buffer management.  These functions need s_mutex held.
- */
-
-/* FIXME: this is inefficient as hell, since dma_alloc_coherent just
- * does a get_free_pages() call, and we waste a good chunk of an orderN
- * allocation.  Should try to allocate the whole set in one chunk.
- */
-static int cafe_alloc_dma_bufs(struct cafe_camera *cam, int loadtime)
-{
-	int i;
-
-	cafe_set_config_needed(cam, 1);
-	if (loadtime)
-		cam->dma_buf_size = dma_buf_size;
-	else
-		cam->dma_buf_size = cam->pix_format.sizeimage;
-	if (n_dma_bufs > 3)
-		n_dma_bufs = 3;
-
-	cam->nbufs = 0;
-	for (i = 0; i < n_dma_bufs; i++) {
-		cam->dma_bufs[i] = dma_alloc_coherent(&cam->pdev->dev,
-				cam->dma_buf_size, cam->dma_handles + i,
-				GFP_KERNEL);
-		if (cam->dma_bufs[i] == NULL) {
-			cam_warn(cam, "Failed to allocate DMA buffer\n");
-			break;
-		}
-		/* For debug, remove eventually */
-		memset(cam->dma_bufs[i], 0xcc, cam->dma_buf_size);
-		(cam->nbufs)++;
-	}
-
-	switch (cam->nbufs) {
-	case 1:
-	    dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size,
-			    cam->dma_bufs[0], cam->dma_handles[0]);
-	    cam->nbufs = 0;
-	case 0:
-	    cam_err(cam, "Insufficient DMA buffers, cannot operate\n");
-	    return -ENOMEM;
-
-	case 2:
-	    if (n_dma_bufs > 2)
-		    cam_warn(cam, "Will limp along with only 2 buffers\n");
-	    break;
-	}
-	return 0;
-}
-
-static void cafe_free_dma_bufs(struct cafe_camera *cam)
-{
-	int i;
-
-	for (i = 0; i < cam->nbufs; i++) {
-		dma_free_coherent(&cam->pdev->dev, cam->dma_buf_size,
-				cam->dma_bufs[i], cam->dma_handles[i]);
-		cam->dma_bufs[i] = NULL;
-	}
-	cam->nbufs = 0;
-}
-
-
-
-
-
-/* ----------------------------------------------------------------------- */
-/*
- * Here starts the V4L2 interface code.
- */
-
-/*
- * Read an image from the device.
- */
-static ssize_t cafe_deliver_buffer(struct cafe_camera *cam,
-		char __user *buffer, size_t len, loff_t *pos)
-{
-	int bufno;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	if (cam->next_buf < 0) {
-		cam_err(cam, "deliver_buffer: No next buffer\n");
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		return -EIO;
-	}
-	bufno = cam->next_buf;
-	clear_bit(bufno, &cam->flags);
-	if (++(cam->next_buf) >= cam->nbufs)
-		cam->next_buf = 0;
-	if (! test_bit(cam->next_buf, &cam->flags))
-		cam->next_buf = -1;
-	cam->specframes = 0;
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-
-	if (len > cam->pix_format.sizeimage)
-		len = cam->pix_format.sizeimage;
-	if (copy_to_user(buffer, cam->dma_bufs[bufno], len))
-		return -EFAULT;
-	(*pos) += len;
-	return len;
-}
-
-/*
- * Get everything ready, and start grabbing frames.
- */
-static int cafe_read_setup(struct cafe_camera *cam, enum cafe_state state)
-{
-	int ret;
-	unsigned long flags;
-
-	/*
-	 * Configuration.  If we still don't have DMA buffers,
-	 * make one last, desperate attempt.
-	 */
-	if (cam->nbufs == 0)
-		if (cafe_alloc_dma_bufs(cam, 0))
-			return -ENOMEM;
-
-	if (cafe_needs_config(cam)) {
-		cafe_cam_configure(cam);
-		ret = cafe_ctlr_configure(cam);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * Turn it loose.
-	 */
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	cafe_reset_buffers(cam);
-	cafe_ctlr_irq_enable(cam);
-	cam->state = state;
-	cafe_ctlr_start(cam);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	return 0;
-}
-
-
-static ssize_t cafe_v4l_read(struct file *filp,
-		char __user *buffer, size_t len, loff_t *pos)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = 0;
-
-	/*
-	 * Perhaps we're in speculative read mode and already
-	 * have data?
-	 */
-	mutex_lock(&cam->s_mutex);
-	if (cam->state == S_SPECREAD) {
-		if (cam->next_buf >= 0) {
-			ret = cafe_deliver_buffer(cam, buffer, len, pos);
-			if (ret != 0)
-				goto out_unlock;
-		}
-	} else if (cam->state == S_FLAKED || cam->state == S_NOTREADY) {
-		ret = -EIO;
-		goto out_unlock;
-	} else if (cam->state != S_IDLE) {
-		ret = -EBUSY;
-		goto out_unlock;
-	}
-
-	/*
-	 * v4l2: multiple processes can open the device, but only
-	 * one gets to grab data from it.
-	 */
-	if (cam->owner && cam->owner != filp) {
-		ret = -EBUSY;
-		goto out_unlock;
-	}
-	cam->owner = filp;
-
-	/*
-	 * Do setup if need be.
-	 */
-	if (cam->state != S_SPECREAD) {
-		ret = cafe_read_setup(cam, S_SINGLEREAD);
-		if (ret)
-			goto out_unlock;
-	}
-	/*
-	 * Wait for something to happen.  This should probably
-	 * be interruptible (FIXME).
-	 */
-	wait_event_timeout(cam->iowait, cam->next_buf >= 0, HZ);
-	if (cam->next_buf < 0) {
-		cam_err(cam, "read() operation timed out\n");
-		cafe_ctlr_stop_dma(cam);
-		ret = -EIO;
-		goto out_unlock;
-	}
-	/*
-	 * Give them their data and we should be done.
-	 */
-	ret = cafe_deliver_buffer(cam, buffer, len, pos);
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-
-
-
-
-
-
-/*
- * Streaming I/O support.
- */
-
-
-
-static int cafe_vidioc_streamon(struct file *filp, void *priv,
-		enum v4l2_buf_type type)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = -EINVAL;
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		goto out;
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_IDLE || cam->n_sbufs == 0)
-		goto out_unlock;
-
-	cam->sequence = 0;
-	ret = cafe_read_setup(cam, S_STREAMING);
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-  out:
-	return ret;
-}
-
-
-static int cafe_vidioc_streamoff(struct file *filp, void *priv,
-		enum v4l2_buf_type type)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = -EINVAL;
-
-	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		goto out;
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_STREAMING)
-		goto out_unlock;
-
-	cafe_ctlr_stop_dma(cam);
-	ret = 0;
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-  out:
-	return ret;
-}
-
-
-
-static int cafe_setup_siobuf(struct cafe_camera *cam, int index)
-{
-	struct cafe_sio_buffer *buf = cam->sb_bufs + index;
-
-	INIT_LIST_HEAD(&buf->list);
-	buf->v4lbuf.length = PAGE_ALIGN(cam->pix_format.sizeimage);
-	buf->buffer = vmalloc_user(buf->v4lbuf.length);
-	if (buf->buffer == NULL)
-		return -ENOMEM;
-	buf->mapcount = 0;
-	buf->cam = cam;
-
-	buf->v4lbuf.index = index;
-	buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	buf->v4lbuf.field = V4L2_FIELD_NONE;
-	buf->v4lbuf.memory = V4L2_MEMORY_MMAP;
-	/*
-	 * Offset: must be 32-bit even on a 64-bit system.  videobuf-dma-sg
-	 * just uses the length times the index, but the spec warns
-	 * against doing just that - vma merging problems.  So we
-	 * leave a gap between each pair of buffers.
-	 */
-	buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length;
-	return 0;
-}
-
-static int cafe_free_sio_buffers(struct cafe_camera *cam)
-{
-	int i;
-
-	/*
-	 * If any buffers are mapped, we cannot free them at all.
-	 */
-	for (i = 0; i < cam->n_sbufs; i++)
-		if (cam->sb_bufs[i].mapcount > 0)
-			return -EBUSY;
-	/*
-	 * OK, let's do it.
-	 */
-	for (i = 0; i < cam->n_sbufs; i++)
-		vfree(cam->sb_bufs[i].buffer);
-	cam->n_sbufs = 0;
-	kfree(cam->sb_bufs);
-	cam->sb_bufs = NULL;
-	INIT_LIST_HEAD(&cam->sb_avail);
-	INIT_LIST_HEAD(&cam->sb_full);
-	return 0;
-}
-
-
-
-static int cafe_vidioc_reqbufs(struct file *filp, void *priv,
-		struct v4l2_requestbuffers *req)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = 0;  /* Silence warning */
-
-	/*
-	 * Make sure it's something we can do.  User pointers could be
-	 * implemented without great pain, but that's not been done yet.
-	 */
-	if (req->memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
-	/*
-	 * If they ask for zero buffers, they really want us to stop streaming
-	 * (if it's happening) and free everything.  Should we check owner?
-	 */
-	mutex_lock(&cam->s_mutex);
-	if (req->count == 0) {
-		if (cam->state == S_STREAMING)
-			cafe_ctlr_stop_dma(cam);
-		ret = cafe_free_sio_buffers (cam);
-		goto out;
-	}
-	/*
-	 * Device needs to be idle and working.  We *could* try to do the
-	 * right thing in S_SPECREAD by shutting things down, but it
-	 * probably doesn't matter.
-	 */
-	if (cam->state != S_IDLE || (cam->owner && cam->owner != filp)) {
-		ret = -EBUSY;
-		goto out;
-	}
-	cam->owner = filp;
-
-	if (req->count < min_buffers)
-		req->count = min_buffers;
-	else if (req->count > max_buffers)
-		req->count = max_buffers;
-	if (cam->n_sbufs > 0) {
-		ret = cafe_free_sio_buffers(cam);
-		if (ret)
-			goto out;
-	}
-
-	cam->sb_bufs = kzalloc(req->count*sizeof(struct cafe_sio_buffer),
-			GFP_KERNEL);
-	if (cam->sb_bufs == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	for (cam->n_sbufs = 0; cam->n_sbufs < req->count; (cam->n_sbufs++)) {
-		ret = cafe_setup_siobuf(cam, cam->n_sbufs);
-		if (ret)
-			break;
-	}
-
-	if (cam->n_sbufs == 0)  /* no luck at all - ret already set */
-		kfree(cam->sb_bufs);
-	req->count = cam->n_sbufs;  /* In case of partial success */
-
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-static int cafe_vidioc_querybuf(struct file *filp, void *priv,
-		struct v4l2_buffer *buf)
-{
-	struct cafe_camera *cam = filp->private_data;
-	int ret = -EINVAL;
-
-	mutex_lock(&cam->s_mutex);
-	if (buf->index >= cam->n_sbufs)
-		goto out;
-	*buf = cam->sb_bufs[buf->index].v4lbuf;
-	ret = 0;
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-static int cafe_vidioc_qbuf(struct file *filp, void *priv,
-		struct v4l2_buffer *buf)
-{
-	struct cafe_camera *cam = filp->private_data;
-	struct cafe_sio_buffer *sbuf;
-	int ret = -EINVAL;
-	unsigned long flags;
-
-	mutex_lock(&cam->s_mutex);
-	if (buf->index >= cam->n_sbufs)
-		goto out;
-	sbuf = cam->sb_bufs + buf->index;
-	if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) {
-		ret = 0; /* Already queued?? */
-		goto out;
-	}
-	if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_DONE) {
-		/* Spec doesn't say anything, seems appropriate tho */
-		ret = -EBUSY;
-		goto out;
-	}
-	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED;
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	list_add(&sbuf->list, &cam->sb_avail);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-	ret = 0;
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-static int cafe_vidioc_dqbuf(struct file *filp, void *priv,
-		struct v4l2_buffer *buf)
-{
-	struct cafe_camera *cam = filp->private_data;
-	struct cafe_sio_buffer *sbuf;
-	int ret = -EINVAL;
-	unsigned long flags;
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->state != S_STREAMING)
-		goto out_unlock;
-	if (list_empty(&cam->sb_full) && filp->f_flags & O_NONBLOCK) {
-		ret = -EAGAIN;
-		goto out_unlock;
-	}
-
-	while (list_empty(&cam->sb_full) && cam->state == S_STREAMING) {
-		mutex_unlock(&cam->s_mutex);
-		if (wait_event_interruptible(cam->iowait,
-						!list_empty(&cam->sb_full))) {
-			ret = -ERESTARTSYS;
-			goto out;
-		}
-		mutex_lock(&cam->s_mutex);
-	}
-
-	if (cam->state != S_STREAMING)
-		ret = -EINTR;
-	else {
-		spin_lock_irqsave(&cam->dev_lock, flags);
-		/* Should probably recheck !list_empty() here */
-		sbuf = list_entry(cam->sb_full.next,
-				struct cafe_sio_buffer, list);
-		list_del_init(&sbuf->list);
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE;
-		*buf = sbuf->v4lbuf;
-		ret = 0;
-	}
-
-  out_unlock:
-	mutex_unlock(&cam->s_mutex);
-  out:
-	return ret;
-}
-
-
-
-static void cafe_v4l_vm_open(struct vm_area_struct *vma)
-{
-	struct cafe_sio_buffer *sbuf = vma->vm_private_data;
-	/*
-	 * Locking: done under mmap_sem, so we don't need to
-	 * go back to the camera lock here.
-	 */
-	sbuf->mapcount++;
-}
-
-
-static void cafe_v4l_vm_close(struct vm_area_struct *vma)
-{
-	struct cafe_sio_buffer *sbuf = vma->vm_private_data;
-
-	mutex_lock(&sbuf->cam->s_mutex);
-	sbuf->mapcount--;
-	/* Docs say we should stop I/O too... */
-	if (sbuf->mapcount == 0)
-		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
-	mutex_unlock(&sbuf->cam->s_mutex);
-}
-
-static const struct vm_operations_struct cafe_v4l_vm_ops = {
-	.open = cafe_v4l_vm_open,
-	.close = cafe_v4l_vm_close
-};
-
-
-static int cafe_v4l_mmap(struct file *filp, struct vm_area_struct *vma)
-{
-	struct cafe_camera *cam = filp->private_data;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
-	int ret = -EINVAL;
-	int i;
-	struct cafe_sio_buffer *sbuf = NULL;
-
-	if (! (vma->vm_flags & VM_WRITE) || ! (vma->vm_flags & VM_SHARED))
-		return -EINVAL;
-	/*
-	 * Find the buffer they are looking for.
-	 */
-	mutex_lock(&cam->s_mutex);
-	for (i = 0; i < cam->n_sbufs; i++)
-		if (cam->sb_bufs[i].v4lbuf.m.offset == offset) {
-			sbuf = cam->sb_bufs + i;
-			break;
-		}
-	if (sbuf == NULL)
-		goto out;
-
-	ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
-	if (ret)
-		goto out;
-	vma->vm_flags |= VM_DONTEXPAND;
-	vma->vm_private_data = sbuf;
-	vma->vm_ops = &cafe_v4l_vm_ops;
-	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED;
-	cafe_v4l_vm_open(vma);
-	ret = 0;
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-
-static int cafe_v4l_open(struct file *filp)
-{
-	struct cafe_camera *cam = video_drvdata(filp);
-
-	filp->private_data = cam;
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->users == 0) {
-		cafe_ctlr_power_up(cam);
-		__cafe_cam_reset(cam);
-		cafe_set_config_needed(cam, 1);
-	/* FIXME make sure this is complete */
-	}
-	(cam->users)++;
-	mutex_unlock(&cam->s_mutex);
-	return 0;
-}
-
-
-static int cafe_v4l_release(struct file *filp)
-{
-	struct cafe_camera *cam = filp->private_data;
-
-	mutex_lock(&cam->s_mutex);
-	(cam->users)--;
-	if (filp == cam->owner) {
-		cafe_ctlr_stop_dma(cam);
-		cafe_free_sio_buffers(cam);
-		cam->owner = NULL;
-	}
-	if (cam->users == 0) {
-		cafe_ctlr_power_down(cam);
-		if (alloc_bufs_at_read)
-			cafe_free_dma_bufs(cam);
-	}
-	mutex_unlock(&cam->s_mutex);
-	return 0;
-}
-
-
-
-static unsigned int cafe_v4l_poll(struct file *filp,
-		struct poll_table_struct *pt)
-{
-	struct cafe_camera *cam = filp->private_data;
-
-	poll_wait(filp, &cam->iowait, pt);
-	if (cam->next_buf >= 0)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-
-
-static int cafe_vidioc_queryctrl(struct file *filp, void *priv,
-		struct v4l2_queryctrl *qc)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, core, queryctrl, qc);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-static int cafe_vidioc_g_ctrl(struct file *filp, void *priv,
-		struct v4l2_control *ctrl)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, core, g_ctrl, ctrl);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-static int cafe_vidioc_s_ctrl(struct file *filp, void *priv,
-		struct v4l2_control *ctrl)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, core, s_ctrl, ctrl);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-
-
-
-
-static int cafe_vidioc_querycap(struct file *file, void *priv,
-		struct v4l2_capability *cap)
-{
-	strcpy(cap->driver, "cafe_ccic");
-	strcpy(cap->card, "cafe_ccic");
-	cap->version = CAFE_VERSION;
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
-		V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
-	return 0;
-}
-
-
-/*
- * The default format we use until somebody says otherwise.
- */
-static const struct v4l2_pix_format cafe_def_pix_format = {
-	.width		= VGA_WIDTH,
-	.height		= VGA_HEIGHT,
-	.pixelformat	= V4L2_PIX_FMT_YUYV,
-	.field		= V4L2_FIELD_NONE,
-	.bytesperline	= VGA_WIDTH*2,
-	.sizeimage	= VGA_WIDTH*VGA_HEIGHT*2,
-};
-
-static const enum v4l2_mbus_pixelcode cafe_def_mbus_code =
-					V4L2_MBUS_FMT_YUYV8_2X8;
-
-static int cafe_vidioc_enum_fmt_vid_cap(struct file *filp,
-		void *priv, struct v4l2_fmtdesc *fmt)
-{
-	if (fmt->index >= N_CAFE_FMTS)
-		return -EINVAL;
-	strlcpy(fmt->description, cafe_formats[fmt->index].desc,
-			sizeof(fmt->description));
-	fmt->pixelformat = cafe_formats[fmt->index].pixelformat;
-	return 0;
-}
-
-static int cafe_vidioc_try_fmt_vid_cap(struct file *filp, void *priv,
-		struct v4l2_format *fmt)
-{
-	struct cafe_camera *cam = priv;
-	struct cafe_format_struct *f;
-	struct v4l2_pix_format *pix = &fmt->fmt.pix;
-	struct v4l2_mbus_framefmt mbus_fmt;
-	int ret;
-
-	f = cafe_find_format(pix->pixelformat);
-	pix->pixelformat = f->pixelformat;
-	v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code);
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt);
-	mutex_unlock(&cam->s_mutex);
-	v4l2_fill_pix_format(pix, &mbus_fmt);
-	pix->bytesperline = pix->width * f->bpp;
-	pix->sizeimage = pix->height * pix->bytesperline;
-	return ret;
-}
-
-static int cafe_vidioc_s_fmt_vid_cap(struct file *filp, void *priv,
-		struct v4l2_format *fmt)
-{
-	struct cafe_camera *cam = priv;
-	struct cafe_format_struct *f;
-	int ret;
-
-	/*
-	 * Can't do anything if the device is not idle
-	 * Also can't if there are streaming buffers in place.
-	 */
-	if (cam->state != S_IDLE || cam->n_sbufs > 0)
-		return -EBUSY;
-
-	f = cafe_find_format(fmt->fmt.pix.pixelformat);
-
-	/*
-	 * See if the formatting works in principle.
-	 */
-	ret = cafe_vidioc_try_fmt_vid_cap(filp, priv, fmt);
-	if (ret)
-		return ret;
-	/*
-	 * Now we start to change things for real, so let's do it
-	 * under lock.
-	 */
-	mutex_lock(&cam->s_mutex);
-	cam->pix_format = fmt->fmt.pix;
-	cam->mbus_code = f->mbus_code;
-
-	/*
-	 * Make sure we have appropriate DMA buffers.
-	 */
-	ret = -ENOMEM;
-	if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage)
-		cafe_free_dma_bufs(cam);
-	if (cam->nbufs == 0) {
-		if (cafe_alloc_dma_bufs(cam, 0))
-			goto out;
-	}
-	/*
-	 * It looks like this might work, so let's program the sensor.
-	 */
-	ret = cafe_cam_configure(cam);
-	if (! ret)
-		ret = cafe_ctlr_configure(cam);
-  out:
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-/*
- * Return our stored notion of how the camera is/should be configured.
- * The V4l2 spec wants us to be smarter, and actually get this from
- * the camera (and not mess with it at open time).  Someday.
- */
-static int cafe_vidioc_g_fmt_vid_cap(struct file *filp, void *priv,
-		struct v4l2_format *f)
-{
-	struct cafe_camera *cam = priv;
-
-	f->fmt.pix = cam->pix_format;
-	return 0;
-}
-
-/*
- * We only have one input - the sensor - so minimize the nonsense here.
- */
-static int cafe_vidioc_enum_input(struct file *filp, void *priv,
-		struct v4l2_input *input)
-{
-	if (input->index != 0)
-		return -EINVAL;
-
-	input->type = V4L2_INPUT_TYPE_CAMERA;
-	input->std = V4L2_STD_ALL; /* Not sure what should go here */
-	strcpy(input->name, "Camera");
-	return 0;
-}
-
-static int cafe_vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-static int cafe_vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	if (i != 0)
-		return -EINVAL;
-	return 0;
-}
-
-/* from vivi.c */
-static int cafe_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a)
-{
-	return 0;
-}
-
-/*
- * G/S_PARM.  Most of this is done by the sensor, but we are
- * the level which controls the number of read buffers.
- */
-static int cafe_vidioc_g_parm(struct file *filp, void *priv,
-		struct v4l2_streamparm *parms)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, g_parm, parms);
-	mutex_unlock(&cam->s_mutex);
-	parms->parm.capture.readbuffers = n_dma_bufs;
-	return ret;
-}
-
-static int cafe_vidioc_s_parm(struct file *filp, void *priv,
-		struct v4l2_streamparm *parms)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, s_parm, parms);
-	mutex_unlock(&cam->s_mutex);
-	parms->parm.capture.readbuffers = n_dma_bufs;
-	return ret;
-}
-
-static int cafe_vidioc_g_chip_ident(struct file *file, void *priv,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	struct cafe_camera *cam = priv;
-
-	chip->ident = V4L2_IDENT_NONE;
-	chip->revision = 0;
-	if (v4l2_chip_match_host(&chip->match)) {
-		chip->ident = V4L2_IDENT_CAFE;
-		return 0;
-	}
-	return sensor_call(cam, core, g_chip_ident, chip);
-}
-
-static int cafe_vidioc_enum_framesizes(struct file *filp, void *priv,
-		struct v4l2_frmsizeenum *sizes)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, enum_framesizes, sizes);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-static int cafe_vidioc_enum_frameintervals(struct file *filp, void *priv,
-		struct v4l2_frmivalenum *interval)
-{
-	struct cafe_camera *cam = priv;
-	int ret;
-
-	mutex_lock(&cam->s_mutex);
-	ret = sensor_call(cam, video, enum_frameintervals, interval);
-	mutex_unlock(&cam->s_mutex);
-	return ret;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int cafe_vidioc_g_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg)
-{
-	struct cafe_camera *cam = priv;
-
-	if (v4l2_chip_match_host(&reg->match)) {
-		reg->val = cafe_reg_read(cam, reg->reg);
-		reg->size = 4;
-		return 0;
-	}
-	return sensor_call(cam, core, g_register, reg);
-}
-
-static int cafe_vidioc_s_register(struct file *file, void *priv,
-		struct v4l2_dbg_register *reg)
-{
-	struct cafe_camera *cam = priv;
-
-	if (v4l2_chip_match_host(&reg->match)) {
-		cafe_reg_write(cam, reg->reg, reg->val);
-		return 0;
-	}
-	return sensor_call(cam, core, s_register, reg);
-}
-#endif
-
-/*
- * This template device holds all of those v4l2 methods; we
- * clone it for specific real devices.
- */
-
-static const struct v4l2_file_operations cafe_v4l_fops = {
-	.owner = THIS_MODULE,
-	.open = cafe_v4l_open,
-	.release = cafe_v4l_release,
-	.read = cafe_v4l_read,
-	.poll = cafe_v4l_poll,
-	.mmap = cafe_v4l_mmap,
-	.unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
-	.vidioc_querycap 	= cafe_vidioc_querycap,
-	.vidioc_enum_fmt_vid_cap = cafe_vidioc_enum_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap	= cafe_vidioc_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap	= cafe_vidioc_s_fmt_vid_cap,
-	.vidioc_g_fmt_vid_cap	= cafe_vidioc_g_fmt_vid_cap,
-	.vidioc_enum_input	= cafe_vidioc_enum_input,
-	.vidioc_g_input		= cafe_vidioc_g_input,
-	.vidioc_s_input		= cafe_vidioc_s_input,
-	.vidioc_s_std		= cafe_vidioc_s_std,
-	.vidioc_reqbufs		= cafe_vidioc_reqbufs,
-	.vidioc_querybuf	= cafe_vidioc_querybuf,
-	.vidioc_qbuf		= cafe_vidioc_qbuf,
-	.vidioc_dqbuf		= cafe_vidioc_dqbuf,
-	.vidioc_streamon	= cafe_vidioc_streamon,
-	.vidioc_streamoff	= cafe_vidioc_streamoff,
-	.vidioc_queryctrl	= cafe_vidioc_queryctrl,
-	.vidioc_g_ctrl		= cafe_vidioc_g_ctrl,
-	.vidioc_s_ctrl		= cafe_vidioc_s_ctrl,
-	.vidioc_g_parm		= cafe_vidioc_g_parm,
-	.vidioc_s_parm		= cafe_vidioc_s_parm,
-	.vidioc_enum_framesizes = cafe_vidioc_enum_framesizes,
-	.vidioc_enum_frameintervals = cafe_vidioc_enum_frameintervals,
-	.vidioc_g_chip_ident    = cafe_vidioc_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.vidioc_g_register 	= cafe_vidioc_g_register,
-	.vidioc_s_register 	= cafe_vidioc_s_register,
-#endif
-};
-
-static struct video_device cafe_v4l_template = {
-	.name = "cafe",
-	.tvnorms = V4L2_STD_NTSC_M,
-	.current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
-
-	.fops = &cafe_v4l_fops,
-	.ioctl_ops = &cafe_v4l_ioctl_ops,
-	.release = video_device_release_empty,
-};
-
-
-/* ---------------------------------------------------------------------- */
-/*
- * Interrupt handler stuff
- */
-
-
-
-static void cafe_frame_tasklet(unsigned long data)
-{
-	struct cafe_camera *cam = (struct cafe_camera *) data;
-	int i;
-	unsigned long flags;
-	struct cafe_sio_buffer *sbuf;
-
-	spin_lock_irqsave(&cam->dev_lock, flags);
-	for (i = 0; i < cam->nbufs; i++) {
-		int bufno = cam->next_buf;
-		if (bufno < 0) {  /* "will never happen" */
-			cam_err(cam, "No valid bufs in tasklet!\n");
-			break;
-		}
-		if (++(cam->next_buf) >= cam->nbufs)
-			cam->next_buf = 0;
-		if (! test_bit(bufno, &cam->flags))
-			continue;
-		if (list_empty(&cam->sb_avail))
-			break;  /* Leave it valid, hope for better later */
-		clear_bit(bufno, &cam->flags);
-		sbuf = list_entry(cam->sb_avail.next,
-				struct cafe_sio_buffer, list);
-		/*
-		 * Drop the lock during the big copy.  This *should* be safe...
-		 */
-		spin_unlock_irqrestore(&cam->dev_lock, flags);
-		memcpy(sbuf->buffer, cam->dma_bufs[bufno],
-				cam->pix_format.sizeimage);
-		sbuf->v4lbuf.bytesused = cam->pix_format.sizeimage;
-		sbuf->v4lbuf.sequence = cam->buf_seq[bufno];
-		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED;
-		sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE;
-		spin_lock_irqsave(&cam->dev_lock, flags);
-		list_move_tail(&sbuf->list, &cam->sb_full);
-	}
-	if (! list_empty(&cam->sb_full))
-		wake_up(&cam->iowait);
-	spin_unlock_irqrestore(&cam->dev_lock, flags);
-}
-
-
-
-static void cafe_frame_complete(struct cafe_camera *cam, int frame)
-{
-	/*
-	 * Basic frame housekeeping.
-	 */
-	if (test_bit(frame, &cam->flags) && printk_ratelimit())
-		cam_err(cam, "Frame overrun on %d, frames lost\n", frame);
-	set_bit(frame, &cam->flags);
-	clear_bit(CF_DMA_ACTIVE, &cam->flags);
-	if (cam->next_buf < 0)
-		cam->next_buf = frame;
-	cam->buf_seq[frame] = ++(cam->sequence);
-
-	switch (cam->state) {
-	/*
-	 * If in single read mode, try going speculative.
-	 */
-	    case S_SINGLEREAD:
-		cam->state = S_SPECREAD;
-		cam->specframes = 0;
-		wake_up(&cam->iowait);
-		break;
-
-	/*
-	 * If we are already doing speculative reads, and nobody is
-	 * reading them, just stop.
-	 */
-	    case S_SPECREAD:
-		if (++(cam->specframes) >= cam->nbufs) {
-			cafe_ctlr_stop(cam);
-			cafe_ctlr_irq_disable(cam);
-			cam->state = S_IDLE;
-		}
-		wake_up(&cam->iowait);
-		break;
-	/*
-	 * For the streaming case, we defer the real work to the
-	 * camera tasklet.
-	 *
-	 * FIXME: if the application is not consuming the buffers,
-	 * we should eventually put things on hold and restart in
-	 * vidioc_dqbuf().
-	 */
-	    case S_STREAMING:
-		tasklet_schedule(&cam->s_tasklet);
-		break;
-
-	    default:
-		cam_err(cam, "Frame interrupt in non-operational state\n");
-		break;
-	}
-}
-
-
-
-
-static void cafe_frame_irq(struct cafe_camera *cam, unsigned int irqs)
-{
-	unsigned int frame;
-
-	cafe_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */
-	/*
-	 * Handle any frame completions.  There really should
-	 * not be more than one of these, or we have fallen
-	 * far behind.
-	 */
-	for (frame = 0; frame < cam->nbufs; frame++)
-		if (irqs & (IRQ_EOF0 << frame))
-			cafe_frame_complete(cam, frame);
-	/*
-	 * If a frame starts, note that we have DMA active.  This
-	 * code assumes that we won't get multiple frame interrupts
-	 * at once; may want to rethink that.
-	 */
-	if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2))
-		set_bit(CF_DMA_ACTIVE, &cam->flags);
-}
-
-
-
-static irqreturn_t cafe_irq(int irq, void *data)
-{
-	struct cafe_camera *cam = data;
-	unsigned int irqs;
-
-	spin_lock(&cam->dev_lock);
-	irqs = cafe_reg_read(cam, REG_IRQSTAT);
-	if ((irqs & ALLIRQS) == 0) {
-		spin_unlock(&cam->dev_lock);
-		return IRQ_NONE;
-	}
-	if (irqs & FRAMEIRQS)
-		cafe_frame_irq(cam, irqs);
-	if (irqs & TWSIIRQS) {
-		cafe_reg_write(cam, REG_IRQSTAT, TWSIIRQS);
-		wake_up(&cam->smbus_wait);
-	}
-	spin_unlock(&cam->dev_lock);
-	return IRQ_HANDLED;
-}
-
-
-/* -------------------------------------------------------------------------- */
-/*
- * PCI interface stuff.
- */
-
-static const struct dmi_system_id olpc_xo1_dmi[] = {
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "1"),
-		},
-	},
-	{ }
-};
-
-static int cafe_pci_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	int ret;
-	struct cafe_camera *cam;
-	struct ov7670_config sensor_cfg = {
-		/* This controller only does SMBUS */
-		.use_smbus = true,
-
-		/*
-		 * Exclude QCIF mode, because it only captures a tiny portion
-		 * of the sensor FOV
-		 */
-		.min_width = 320,
-		.min_height = 240,
-	};
-	struct i2c_board_info ov7670_info = {
-		.type = "ov7670",
-		.addr = 0x42,
-		.platform_data = &sensor_cfg,
-	};
-
-	/*
-	 * Start putting together one of our big camera structures.
-	 */
-	ret = -ENOMEM;
-	cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
-	if (cam == NULL)
-		goto out;
-	ret = v4l2_device_register(&pdev->dev, &cam->v4l2_dev);
-	if (ret)
-		goto out_free;
-
-	mutex_init(&cam->s_mutex);
-	spin_lock_init(&cam->dev_lock);
-	cam->state = S_NOTREADY;
-	cafe_set_config_needed(cam, 1);
-	init_waitqueue_head(&cam->smbus_wait);
-	init_waitqueue_head(&cam->iowait);
-	cam->pdev = pdev;
-	cam->pix_format = cafe_def_pix_format;
-	cam->mbus_code = cafe_def_mbus_code;
-	INIT_LIST_HEAD(&cam->dev_list);
-	INIT_LIST_HEAD(&cam->sb_avail);
-	INIT_LIST_HEAD(&cam->sb_full);
-	tasklet_init(&cam->s_tasklet, cafe_frame_tasklet, (unsigned long) cam);
-	/*
-	 * Get set up on the PCI bus.
-	 */
-	ret = pci_enable_device(pdev);
-	if (ret)
-		goto out_unreg;
-	pci_set_master(pdev);
-
-	ret = -EIO;
-	cam->regs = pci_iomap(pdev, 0, 0);
-	if (! cam->regs) {
-		printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
-		goto out_unreg;
-	}
-	ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
-	if (ret)
-		goto out_iounmap;
-	/*
-	 * Initialize the controller and leave it powered up.  It will
-	 * stay that way until the sensor driver shows up.
-	 */
-	cafe_ctlr_init(cam);
-	cafe_ctlr_power_up(cam);
-	/*
-	 * Set up I2C/SMBUS communications.  We have to drop the mutex here
-	 * because the sensor could attach in this call chain, leading to
-	 * unsightly deadlocks.
-	 */
-	ret = cafe_smbus_setup(cam);
-	if (ret)
-		goto out_freeirq;
-
-	/* Apply XO-1 clock speed */
-	if (dmi_check_system(olpc_xo1_dmi))
-		sensor_cfg.clock_speed = 45;
-
-	cam->sensor_addr = ov7670_info.addr;
-	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, &cam->i2c_adapter,
-			&ov7670_info, NULL);
-	if (cam->sensor == NULL) {
-		ret = -ENODEV;
-		goto out_smbus;
-	}
-
-	ret = cafe_cam_init(cam);
-	if (ret)
-		goto out_smbus;
-
-	/*
-	 * Get the v4l2 setup done.
-	 */
-	mutex_lock(&cam->s_mutex);
-	cam->vdev = cafe_v4l_template;
-	cam->vdev.debug = 0;
-/*	cam->vdev.debug = V4L2_DEBUG_IOCTL_ARG;*/
-	cam->vdev.v4l2_dev = &cam->v4l2_dev;
-	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
-	if (ret)
-		goto out_unlock;
-	video_set_drvdata(&cam->vdev, cam);
-
-	/*
-	 * If so requested, try to get our DMA buffers now.
-	 */
-	if (!alloc_bufs_at_read) {
-		if (cafe_alloc_dma_bufs(cam, 1))
-			cam_warn(cam, "Unable to alloc DMA buffers at load"
-					" will try again later.");
-	}
-
-	mutex_unlock(&cam->s_mutex);
-	return 0;
-
-out_unlock:
-	mutex_unlock(&cam->s_mutex);
-out_smbus:
-	cafe_smbus_shutdown(cam);
-out_freeirq:
-	cafe_ctlr_power_down(cam);
-	free_irq(pdev->irq, cam);
-out_iounmap:
-	pci_iounmap(pdev, cam->regs);
-out_free:
-	v4l2_device_unregister(&cam->v4l2_dev);
-out_unreg:
-	kfree(cam);
-out:
-	return ret;
-}
-
-
-/*
- * Shut down an initialized device
- */
-static void cafe_shutdown(struct cafe_camera *cam)
-{
-/* FIXME: Make sure we take care of everything here */
-	if (cam->n_sbufs > 0)
-		/* What if they are still mapped?  Shouldn't be, but... */
-		cafe_free_sio_buffers(cam);
-	cafe_ctlr_stop_dma(cam);
-	cafe_ctlr_power_down(cam);
-	cafe_smbus_shutdown(cam);
-	cafe_free_dma_bufs(cam);
-	free_irq(cam->pdev->irq, cam);
-	pci_iounmap(cam->pdev, cam->regs);
-	video_unregister_device(&cam->vdev);
-}
-
-
-static void cafe_pci_remove(struct pci_dev *pdev)
-{
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-
-	if (cam == NULL) {
-		printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
-		return;
-	}
-	mutex_lock(&cam->s_mutex);
-	if (cam->users > 0)
-		cam_warn(cam, "Removing a device with users!\n");
-	cafe_shutdown(cam);
-	v4l2_device_unregister(&cam->v4l2_dev);
-	kfree(cam);
-/* No unlock - it no longer exists */
-}
-
-
-#ifdef CONFIG_PM
-/*
- * Basic power management.
- */
-static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-	int ret;
-	enum cafe_state cstate;
-
-	ret = pci_save_state(pdev);
-	if (ret)
-		return ret;
-	cstate = cam->state; /* HACK - stop_dma sets to idle */
-	cafe_ctlr_stop_dma(cam);
-	cafe_ctlr_power_down(cam);
-	pci_disable_device(pdev);
-	cam->state = cstate;
-	return 0;
-}
-
-
-static int cafe_pci_resume(struct pci_dev *pdev)
-{
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
-	struct cafe_camera *cam = to_cam(v4l2_dev);
-	int ret = 0;
-
-	pci_restore_state(pdev);
-	ret = pci_enable_device(pdev);
-
-	if (ret) {
-		cam_warn(cam, "Unable to re-enable device on resume!\n");
-		return ret;
-	}
-	cafe_ctlr_init(cam);
-
-	mutex_lock(&cam->s_mutex);
-	if (cam->users > 0) {
-		cafe_ctlr_power_up(cam);
-		__cafe_cam_reset(cam);
-	} else {
-		cafe_ctlr_power_down(cam);
-	}
-	mutex_unlock(&cam->s_mutex);
-
-	set_bit(CF_CONFIG_NEEDED, &cam->flags);
-	if (cam->state == S_SPECREAD)
-		cam->state = S_IDLE;  /* Don't bother restarting */
-	else if (cam->state == S_SINGLEREAD || cam->state == S_STREAMING)
-		ret = cafe_read_setup(cam, cam->state);
-	return ret;
-}
-
-#endif  /* CONFIG_PM */
-
-
-static struct pci_device_id cafe_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL,
-		     PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, cafe_ids);
-
-static struct pci_driver cafe_pci_driver = {
-	.name = "cafe1000-ccic",
-	.id_table = cafe_ids,
-	.probe = cafe_pci_probe,
-	.remove = cafe_pci_remove,
-#ifdef CONFIG_PM
-	.suspend = cafe_pci_suspend,
-	.resume = cafe_pci_resume,
-#endif
-};
-
-
-
-
-static int __init cafe_init(void)
-{
-	int ret;
-
-	printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
-			CAFE_VERSION);
-	ret = pci_register_driver(&cafe_pci_driver);
-	if (ret) {
-		printk(KERN_ERR "Unable to register cafe_ccic driver\n");
-		goto out;
-	}
-	ret = 0;
-
-  out:
-	return ret;
-}
-
-
-static void __exit cafe_exit(void)
-{
-	pci_unregister_driver(&cafe_pci_driver);
-}
-
-module_init(cafe_init);
-module_exit(cafe_exit);
diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h
index 6d6d1843791..ab252188981 100644
--- a/drivers/media/video/cpia2/cpia2.h
+++ b/drivers/media/video/cpia2/cpia2.h
@@ -31,7 +31,6 @@
 #ifndef __CPIA2_H__
 #define __CPIA2_H__
 
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <linux/usb.h>
@@ -43,10 +42,6 @@
 /* define for verbose debug output */
 //#define _CPIA2_DEBUG_
 
-#define CPIA2_MAJ_VER	3
-#define CPIA2_MIN_VER   0
-#define CPIA2_PATCH_VER	0
-
 /***
  * Image defines
  ***/
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 40eb6326e48..077eb1db80a 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -29,8 +29,7 @@
  *		Alan Cox <alan@lxorguk.ukuu.org.uk>
  ****************************************************************************/
 
-#include <linux/version.h>
-
+#define CPIA_VERSION "3.0.1"
 
 #include <linux/module.h>
 #include <linux/time.h>
@@ -80,6 +79,7 @@ MODULE_AUTHOR("Steve Miller (STMicroelectronics) <steve.miller@st.com>");
 MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras");
 MODULE_SUPPORTED_DEVICE("video");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CPIA_VERSION);
 
 #define ABOUT "V4L-Driver for Vision CPiA2 based cameras"
 
@@ -465,9 +465,6 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v
 	if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) <0)
 		memset(vc->bus_info,0, sizeof(vc->bus_info));
 
-	vc->version = KERNEL_VERSION(CPIA2_MAJ_VER, CPIA2_MIN_VER,
-				     CPIA2_PATCH_VER);
-
 	vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 			   V4L2_CAP_READWRITE |
 			   V4L2_CAP_STREAMING;
@@ -1558,8 +1555,8 @@ static void __init check_parameters(void)
  *****************************************************************************/
 static int __init cpia2_init(void)
 {
-	LOG("%s v%d.%d.%d\n",
-	    ABOUT, CPIA2_MAJ_VER, CPIA2_MIN_VER, CPIA2_PATCH_VER);
+	LOG("%s v%s\n",
+	    ABOUT, CPIA_VERSION);
 	check_parameters();
 	cpia2_usb_init();
 	return 0;
@@ -1579,4 +1576,3 @@ static void __exit cpia2_exit(void)
 
 module_init(cpia2_init);
 module_exit(cpia2_exit);
-
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
index d50d69da387..a1e6c2a3247 100644
--- a/drivers/media/video/cx18/cx18-alsa-main.c
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -192,6 +192,7 @@ static int snd_cx18_init(struct v4l2_device *v4l2_dev)
 err_exit_free:
 	if (sc != NULL)
 		snd_card_free(sc);
+	kfree(cxsc);
 err_exit:
 	return ret;
 }
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 086427288de..18342072306 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -25,7 +25,6 @@
 #ifndef CX18_DRIVER_H
 #define CX18_DRIVER_H
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index e80134f52ef..afe0a29e720 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -469,7 +469,6 @@ static int cx18_querycap(struct file *file, void *fh,
 	strlcpy(vcap->card, cx->card_name, sizeof(vcap->card));
 	snprintf(vcap->bus_info, sizeof(vcap->bus_info),
 		 "PCI:%s", pci_name(cx->pci_dev));
-	vcap->version = CX18_DRIVER_VERSION; 	    /* version */
 	vcap->capabilities = cx->v4l2_cap; 	    /* capabilities */
 	return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h
index cd189b6bbe2..fed48b6bb67 100644
--- a/drivers/media/video/cx18/cx18-version.h
+++ b/drivers/media/video/cx18/cx18-version.h
@@ -23,12 +23,6 @@
 #define CX18_VERSION_H
 
 #define CX18_DRIVER_NAME "cx18"
-#define CX18_DRIVER_VERSION_MAJOR 1
-#define CX18_DRIVER_VERSION_MINOR 5
-#define CX18_DRIVER_VERSION_PATCHLEVEL 0
-
-#define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL)
-#define CX18_DRIVER_VERSION KERNEL_VERSION(CX18_DRIVER_VERSION_MAJOR, \
-	CX18_DRIVER_VERSION_MINOR, CX18_DRIVER_VERSION_PATCHLEVEL)
+#define CX18_VERSION "1.5.1"
 
 #endif
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 8d781341576..53ff26e7abf 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -355,6 +355,8 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 	case CX231XX_BOARD_HAUPPAUGE_USBLIVE2:
 	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 		if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
 			while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
 						FLD_PWRDN_ENABLE_PLL)) {
@@ -1733,6 +1735,8 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard)
 		break;
 	case CX231XX_BOARD_CNXT_RDE_253S:
 	case CX231XX_BOARD_CNXT_RDU_253S:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 		func_mode = 0x01;
 		break;
 	default:
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 22703815a31..53dae2a8272 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -387,6 +387,7 @@ struct cx231xx_board cx231xx_boards[] = {
 		.norm = V4L2_STD_NTSC,
 		.no_alt_vanc = 1,
 		.external_av = 1,
+		.dont_use_port_3 = 1,
 		.input = {{
 			.type = CX231XX_VMUX_COMPOSITE1,
 			.vmux = CX231XX_VIN_2_1,
@@ -532,6 +533,76 @@ struct cx231xx_board cx231xx_boards[] = {
 			.gpio = NULL,
 		} },
 	},
+	[CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL] = {
+		.name = "Hauppauge WinTV USB2 FM (PAL)",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.tuner_gpio = RDE250_XCV_TUNER,
+		.tuner_sif_gpio = 0x05,
+		.tuner_scl_gpio = 0x1a,
+		.tuner_sda_gpio = 0x1b,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x0c,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 1,
+		.norm = V4L2_STD_PAL,
+
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		} },
+	},
+	[CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC] = {
+		.name = "Hauppauge WinTV USB2 FM (NTSC)",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.tuner_gpio = RDE250_XCV_TUNER,
+		.tuner_sif_gpio = 0x05,
+		.tuner_scl_gpio = 0x1a,
+		.tuner_sda_gpio = 0x1b,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x0c,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 1,
+		.norm = V4L2_STD_NTSC,
+
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = NULL,
+		} },
+	},
 };
 const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 
@@ -553,6 +624,10 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_CNXT_RDE_250},
 	{USB_DEVICE(0x0572, 0x58A0),
 	 .driver_info = CX231XX_BOARD_CNXT_RDU_250},
+	{USB_DEVICE(0x2040, 0xb110),
+	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL},
+	{USB_DEVICE(0x2040, 0xb111),
+	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC},
 	{USB_DEVICE(0x2040, 0xb120),
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
 	{USB_DEVICE(0x2040, 0xb140),
@@ -1051,6 +1126,9 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
 	if (assoc_desc->bFirstInterface != ifnum) {
 		cx231xx_err(DRIVER_NAME ": Not found "
 			    "matching IAD interface\n");
+		cx231xx_devused &= ~(1 << nr);
+		kfree(dev);
+		dev = NULL;
 		return -ENODEV;
 	}
 
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index abe500feb7d..d4457f9488e 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -742,6 +742,8 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 		case CX231XX_BOARD_CNXT_RDU_253S:
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
 		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
@@ -1381,6 +1383,8 @@ int cx231xx_dev_init(struct cx231xx *dev)
 	case CX231XX_BOARD_CNXT_RDU_253S:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
+	case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
 	errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 		break;
 	default:
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index a69c24d8db0..6e81f970dc7 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -29,7 +29,6 @@
 #include <linux/bitmap.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
@@ -45,7 +44,7 @@
 #include "cx231xx.h"
 #include "cx231xx-vbi.h"
 
-#define CX231XX_VERSION_CODE            KERNEL_VERSION(0, 0, 1)
+#define CX231XX_VERSION "0.0.2"
 
 #define DRIVER_AUTHOR   "Srinivasa Deevi <srinivasa.deevi@conexant.com>"
 #define DRIVER_DESC     "Conexant cx231xx based USB video device driver"
@@ -70,6 +69,7 @@ do {\
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX231XX_VERSION);
 
 static unsigned int card[]     = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
 static unsigned int video_nr[] = {[0 ... (CX231XX_MAXBOARDS - 1)] = UNSET };
@@ -1179,7 +1179,8 @@ static int vidioc_enum_input(struct file *file, void *priv,
 {
 	struct cx231xx_fh *fh = priv;
 	struct cx231xx *dev = fh->dev;
-	unsigned int n;
+	u32 gen_stat;
+	unsigned int ret, n;
 
 	n = i->index;
 	if (n >= MAX_CX231XX_INPUT)
@@ -1198,6 +1199,18 @@ static int vidioc_enum_input(struct file *file, void *priv,
 
 	i->std = dev->vdev->tvnorms;
 
+	/* If they are asking about the active input, read signal status */
+	if (n == dev->video_input) {
+		ret = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS,
+					    GEN_STAT, 2, &gen_stat, 4);
+		if (ret > 0) {
+			if ((gen_stat & FLD_VPRES) == 0x00)
+				i->status |= V4L2_IN_ST_NO_SIGNAL;
+			if ((gen_stat & FLD_HLOCK) == 0x00)
+				i->status |= V4L2_IN_ST_NO_H_LOCK;
+		}
+	}
+
 	return 0;
 }
 
@@ -1869,8 +1882,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = CX231XX_VERSION_CODE;
-
 	cap->capabilities = V4L2_CAP_VBI_CAPTURE |
 #if 0
 		V4L2_CAP_SLICED_VBI_CAPTURE |
@@ -2057,7 +2068,6 @@ static int radio_querycap(struct file *file, void *priv,
 	strlcpy(cap->card, cx231xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = CX231XX_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -2570,11 +2580,8 @@ int cx231xx_register_analog_devices(struct cx231xx *dev)
 {
 	int ret;
 
-	cx231xx_info("%s: v4l2 driver version %d.%d.%d\n",
-		     dev->name,
-		     (CX231XX_VERSION_CODE >> 16) & 0xff,
-		     (CX231XX_VERSION_CODE >> 8) & 0xff,
-		     CX231XX_VERSION_CODE & 0xff);
+	cx231xx_info("%s: v4l2 driver version %s\n",
+		     dev->name, CX231XX_VERSION);
 
 	/* set default norm */
 	/*dev->norm = cx231xx_video_template.current_norm; */
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index 46dd8406781..2000bc64c49 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -43,7 +43,7 @@
 #include "cx231xx-conf-reg.h"
 
 #define DRIVER_NAME                     "cx231xx"
-#define PWR_SLEEP_INTERVAL              5
+#define PWR_SLEEP_INTERVAL              10
 
 /* I2C addresses for control block in Cx231xx */
 #define     AFE_DEVICE_ADDRESS		0x60
@@ -67,6 +67,8 @@
 #define CX231XX_BOARD_PV_XCAPTURE_USB 11
 #define CX231XX_BOARD_KWORLD_UB430_USB_HYBRID 12
 #define CX231XX_BOARD_ICONBIT_U100 13
+#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL 14
+#define CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC 15
 
 /* Limits minimum and default number of buffers */
 #define CX231XX_MIN_BUF                 4
@@ -112,7 +114,6 @@
 	V4L2_STD_PAL_BG |  V4L2_STD_PAL_DK    |  V4L2_STD_PAL_I    | \
 	V4L2_STD_PAL_M  |  V4L2_STD_PAL_N     |  V4L2_STD_PAL_Nc   | \
 	V4L2_STD_PAL_60 |  V4L2_STD_SECAM_L   |  V4L2_STD_SECAM_DK)
-#define CX231xx_VERSION_CODE KERNEL_VERSION(0, 0, 2)
 
 #define SLEEP_S5H1432    30
 #define CX23417_OSC_EN   8
diff --git a/drivers/media/video/cx23885/altera-ci.c b/drivers/media/video/cx23885/altera-ci.c
index 678539b2acf..1fa8927f0d3 100644
--- a/drivers/media/video/cx23885/altera-ci.c
+++ b/drivers/media/video/cx23885/altera-ci.c
@@ -52,7 +52,6 @@
  * |  DATA7|  DATA6|  DATA5|  DATA4|  DATA3|  DATA2|  DATA1|  DATA0|
  * +-------+-------+-------+-------+-------+-------+-------+-------+
  */
-#include <linux/version.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
 #include "altera-ci.h"
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 9a98dc55f65..67c4a59bd88 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -1359,7 +1359,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, cx23885_boards[tsport->dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = CX23885_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 934185cca75..76b7563de39 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -29,11 +29,17 @@
 #include "../../../staging/altera-stapl/altera.h"
 #include "cx23885.h"
 #include "tuner-xc2028.h"
+#include "netup-eeprom.h"
 #include "netup-init.h"
 #include "altera-ci.h"
+#include "xc4000.h"
 #include "xc5000.h"
 #include "cx23888-ir.h"
 
+static unsigned int netup_card_rev = 1;
+module_param(netup_card_rev, int, 0644);
+MODULE_PARM_DESC(netup_card_rev,
+		"NetUP Dual DVB-T/C CI card revision");
 static unsigned int enable_885_ir;
 module_param(enable_885_ir, int, 0644);
 MODULE_PARM_DESC(enable_885_ir,
@@ -175,6 +181,34 @@ struct cx23885_board cx23885_boards[] = {
 		.name		= "Leadtek Winfast PxDVR3200 H",
 		.portc		= CX23885_MPEG_DVB,
 	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = {
+		.name		= "Leadtek Winfast PxDVR3200 H XC4000",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_type	= TUNER_XC4000,
+		.radio_addr	= 0x61,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	= CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3,
+		}, {
+			.type	= CX23885_VMUX_COMPOSITE1,
+			.vmux	= CX25840_COMPOSITE1,
+		}, {
+			.type	= CX23885_VMUX_SVIDEO,
+			.vmux	= CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		}, {
+			.type	= CX23885_VMUX_COMPONENT,
+			.vmux	= CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+		} },
+	},
 	[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
 		.name		= "Compro VideoMate E650F",
 		.portc		= CX23885_MPEG_DVB,
@@ -433,6 +467,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subdevice = 0x6681,
 		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
 	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f39,
+		.card	   = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000,
+	}, {
 		.subvendor = 0x185b,
 		.subdevice = 0xe800,
 		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
@@ -749,6 +787,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 	case CX23885_BOARD_HAUPPAUGE_HVR1500:
 	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
@@ -909,6 +948,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		cx_set(GP0_IO, 0x000f000f);
 		break;
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
@@ -1097,12 +1137,19 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1200:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
-	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
 	case CX23885_BOARD_HAUPPAUGE_HVR1255:
 	case CX23885_BOARD_HAUPPAUGE_HVR1210:
 		/* FIXME: Implement me */
 		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+		ret = cx23888_ir_probe(dev);
+		if (ret)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		ret = cx23888_ir_probe(dev);
@@ -1156,6 +1203,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 void cx23885_ir_fini(struct cx23885_dev *dev)
 {
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		cx23885_irq_remove(dev, PCI_MSK_IR);
@@ -1199,6 +1247,7 @@ int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
 void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
 {
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		if (dev->sd_ir)
@@ -1325,6 +1374,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1275:
@@ -1353,10 +1403,12 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
 	case CX23885_BOARD_HAUPPAUGE_HVR1700:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_MYGICA_X8506:
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
@@ -1383,6 +1435,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 		const struct firmware *fw;
 		const char *filename = "dvb-netup-altera-01.fw";
 		char *action = "configure";
+		static struct netup_card_info cinfo;
 		struct altera_config netup_config = {
 			.dev = dev,
 			.action = action,
@@ -1391,6 +1444,21 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 
 		netup_initialize(dev);
 
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		if (netup_card_rev)
+			cinfo.rev = netup_card_rev;
+
+		switch (cinfo.rev) {
+		case 0x4:
+			filename = "dvb-netup-altera-04.fw";
+			break;
+		default:
+			filename = "dvb-netup-altera-01.fw";
+			break;
+		}
+		printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n",
+				cinfo.rev, filename);
+
 		ret = request_firmware(&fw, filename, &dev->pci->dev);
 		if (ret != 0)
 			printk(KERN_ERR "did not find the firmware file. (%s) "
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 419777a832e..ee41a8882f5 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -42,6 +42,7 @@
 MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
 MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX23885_VERSION);
 
 static unsigned int debug;
 module_param(debug, int, 0644);
@@ -2147,14 +2148,8 @@ static struct pci_driver cx23885_pci_driver = {
 
 static int __init cx23885_init(void)
 {
-	printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n",
-	       (CX23885_VERSION_CODE >> 16) & 0xff,
-	       (CX23885_VERSION_CODE >>  8) & 0xff,
-	       CX23885_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx23885: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx23885 driver version %s loaded\n",
+		CX23885_VERSION);
 	return pci_register_driver(&cx23885_pci_driver);
 }
 
@@ -2165,5 +2160,3 @@ static void __exit cx23885_fini(void)
 
 module_init(cx23885_init);
 module_exit(cx23885_fini);
-
-/* ----------------------------------------------------------- */
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 3c315f94cc8..aa83f07b1b0 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -37,6 +37,7 @@
 #include "tda8290.h"
 #include "tda18271.h"
 #include "lgdt330x.h"
+#include "xc4000.h"
 #include "xc5000.h"
 #include "max2165.h"
 #include "tda10048.h"
@@ -921,6 +922,26 @@ static int dvb_register(struct cx23885_tsport *port)
 				fe->ops.tuner_ops.set_config(fe, &ctl);
 		}
 		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend	*fe;
+			struct xc4000_config	cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+
+			fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
+					&dev->i2c_bus[1].i2c_adap, &cfg);
+		}
+		break;
 	case CX23885_BOARD_TBS_6920:
 		i2c_bus = &dev->i2c_bus[1];
 
@@ -1249,7 +1270,7 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port)
 	 * implement MFE support.
 	 */
 	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
-	if (fe0->dvb.frontend)
+	if (fe0 && fe0->dvb.frontend)
 		videobuf_dvb_unregister_bus(&port->frontends);
 
 	switch (port->dev->board) {
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index e97cafd8398..ce765e3f77b 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -82,6 +82,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 		return;
 
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_TEVII_S470:
@@ -133,6 +134,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 
 	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
@@ -229,6 +231,9 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	}
+	flush_work_sync(&dev->cx25840_work);
+	flush_work_sync(&dev->ir_rx_work);
+	flush_work_sync(&dev->ir_tx_work);
 }
 
 static void cx23885_input_ir_close(struct rc_dev *rc)
@@ -257,6 +262,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
 		return -ENODEV;
 
 	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index ee57f6bedbe..896bb32dbf0 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1000,7 +1000,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, cx23885_boards[dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
-	cap->version = CX23885_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index c186473fc57..d86bc0b1317 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -36,10 +36,9 @@
 #include "cx23885-reg.h"
 #include "media/cx2341x.h"
 
-#include <linux/version.h>
 #include <linux/mutex.h>
 
-#define CX23885_VERSION_CODE KERNEL_VERSION(0, 0, 2)
+#define CX23885_VERSION "0.0.3"
 
 #define UNSET (-1U)
 
@@ -86,6 +85,7 @@
 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
 #define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID     29
 #define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 423c1af8a78..68d1240f493 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -113,6 +113,8 @@ MODULE_DESCRIPTION("ALSA driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Ricardo Cerqueira");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
+
 MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
 			"{{Conexant,23882},"
 			"{{Conexant,23883}");
@@ -973,14 +975,8 @@ static struct pci_driver cx88_audio_pci_driver = {
  */
 static int __init cx88_audio_init(void)
 {
-	printk(KERN_INFO "cx2388x alsa driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx2388x alsa driver version %s loaded\n",
+	       CX88_VERSION);
 	return pci_register_driver(&cx88_audio_pci_driver);
 }
 
@@ -994,10 +990,3 @@ static void __exit cx88_audio_fini(void)
 
 module_init(cx88_audio_init);
 module_exit(cx88_audio_fini);
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 11e49bbc4a6..e46446a449c 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -42,6 +42,7 @@
 MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards");
 MODULE_AUTHOR("Jelle Foks <jelle@foks.us>, Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 static unsigned int mpegbufs = 32;
 module_param(mpegbufs,int,0644);
@@ -730,7 +731,6 @@ static int vidioc_querycap (struct file *file, void  *priv,
 	strcpy(cap->driver, "cx88_blackbird");
 	strlcpy(cap->card, core->board.name, sizeof(cap->card));
 	sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
-	cap->version = CX88_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
@@ -1368,14 +1368,8 @@ static struct cx8802_driver cx8802_blackbird_driver = {
 
 static int __init blackbird_init(void)
 {
-	printk(KERN_INFO "cx2388x blackbird driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx2388x blackbird driver version %s loaded\n",
+	       CX88_VERSION);
 	return cx8802_register_driver(&cx8802_blackbird_driver);
 }
 
@@ -1389,11 +1383,3 @@ module_exit(blackbird_fini);
 
 module_param_named(video_debug,cx8802_mpeg_template.debug, int, 0644);
 MODULE_PARM_DESC(debug,"enable debug messages [video]");
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 27222c92b60..0d719faafd8 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -28,6 +28,7 @@
 
 #include "cx88.h"
 #include "tea5767.h"
+#include "xc4000.h"
 
 static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
 static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
@@ -2119,6 +2120,99 @@ static const struct cx88_board cx88_boards[] = {
 		},
 		.mpeg           = CX88_MPEG_DVB,
 	},
+	[CX88_BOARD_WINFAST_DTV1800H_XC4000] = {
+		.name		= "Leadtek WinFast DTV1800 H (XC4000)",
+		.tuner_type	= TUNER_XC4000,
+		.radio_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_addr	= 0x61,
+		/*
+		 * GPIO setting
+		 *
+		 *  2: mute (0=off,1=on)
+		 * 12: tuner reset pin
+		 * 13: audio source (0=tuner audio,1=line in)
+		 * 14: FM (0=on,1=off ???)
+		 */
+		.input		= {{
+			.type	= CX88_VMUX_TELEVISION,
+			.vmux	= 0,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6040,	/* pin 13 = 0, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6060,	/* pin 13 = 1, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6060,	/* pin 13 = 1, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}},
+		.radio = {
+			.type	= CX88_RADIO,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6000,	/* pin 13 = 0, pin 14 = 0 */
+			.gpio2	= 0x0000,
+		},
+		.mpeg		= CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_WINFAST_DTV2000H_PLUS] = {
+		.name		= "Leadtek WinFast DTV2000 H PLUS",
+		.tuner_type	= TUNER_XC4000,
+		.radio_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_addr	= 0x61,
+		/*
+		 * GPIO
+		 *   2: 1: mute audio
+		 *  12: 0: reset XC4000
+		 *  13: 1: audio input is line in (0: tuner)
+		 *  14: 0: FM radio
+		 *  16: 0: RF input is cable
+		 */
+		.input		= {{
+			.type	= CX88_VMUX_TELEVISION,
+			.vmux	= 0,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF0D7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_CABLE,
+			.vmux	= 0,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF0D7,
+			.gpio2	= 0x0100,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0x0403,	/* was 0x0407 */
+			.gpio1	= 0xF0F7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0x0403,	/* was 0x0407 */
+			.gpio1	= 0xF0F7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}},
+		.radio = {
+			.type	= CX88_RADIO,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF097,
+			.gpio2	= 0x0100,
+			.gpio3	= 0x0000,
+		},
+		.mpeg		= CX88_MPEG_DVB,
+	},
 	[CX88_BOARD_PROF_7301] = {
 		.name           = "Prof 7301 DVB-S/S2",
 		.tuner_type     = UNSET,
@@ -2581,6 +2675,15 @@ static const struct cx88_subid cx88_subids[] = {
 		.subdevice = 0x6654,
 		.card      = CX88_BOARD_WINFAST_DTV1800H,
 	}, {
+		/* WinFast DTV1800 H with XC4000 tuner */
+		.subvendor = 0x107d,
+		.subdevice = 0x6f38,
+		.card      = CX88_BOARD_WINFAST_DTV1800H_XC4000,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f42,
+		.card      = CX88_BOARD_WINFAST_DTV2000H_PLUS,
+	}, {
 		/* PVR2000 PAL Model [107d:6630] */
 		.subvendor = 0x107d,
 		.subdevice = 0x6630,
@@ -2846,6 +2949,23 @@ static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core,
 	return -EINVAL;
 }
 
+static int cx88_xc4000_winfast2000h_plus_callback(struct cx88_core *core,
+						  int command, int arg)
+{
+	switch (command) {
+	case XC4000_TUNER_RESET:
+		/* GPIO 12 (xc4000 tuner reset) */
+		cx_set(MO_GP1_IO, 0x1010);
+		mdelay(50);
+		cx_clear(MO_GP1_IO, 0x10);
+		mdelay(75);
+		cx_set(MO_GP1_IO, 0x10);
+		mdelay(75);
+		return 0;
+	}
+	return -EINVAL;
+}
+
 /* ------------------------------------------------------------------- */
 /* some Divco specific stuff                                           */
 static int cx88_pv_8000gt_callback(struct cx88_core *core,
@@ -2948,6 +3068,19 @@ static int cx88_xc2028_tuner_callback(struct cx88_core *core,
 	return -EINVAL;
 }
 
+static int cx88_xc4000_tuner_callback(struct cx88_core *core,
+				      int command, int arg)
+{
+	/* Board-specific callbacks */
+	switch (core->boardnr) {
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		return cx88_xc4000_winfast2000h_plus_callback(core,
+							      command, arg);
+	}
+	return -EINVAL;
+}
+
 /* ----------------------------------------------------------------------- */
 /* Tuner callback function. Currently only needed for the Pinnacle 	   *
  * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both	   *
@@ -3022,6 +3155,9 @@ int cx88_tuner_callback(void *priv, int component, int command, int arg)
 		case TUNER_XC2028:
 			info_printk(core, "Calling XC2028/3028 callback\n");
 			return cx88_xc2028_tuner_callback(core, command, arg);
+		case TUNER_XC4000:
+			info_printk(core, "Calling XC4000 callback\n");
+			return cx88_xc4000_tuner_callback(core, command, arg);
 		case TUNER_XC5000:
 			info_printk(core, "Calling XC5000 callback\n");
 			return cx88_xc5000_tuner_callback(core, command, arg);
@@ -3109,13 +3245,13 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core)
 
 	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 	case CX88_BOARD_WINFAST_DTV1800H:
-		/* GPIO 12 (xc3028 tuner reset) */
-		cx_set(MO_GP1_IO, 0x1010);
-		mdelay(50);
-		cx_clear(MO_GP1_IO, 0x10);
-		mdelay(50);
-		cx_set(MO_GP1_IO, 0x10);
-		mdelay(50);
+		cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0);
+		break;
+
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		cx88_xc4000_winfast2000h_plus_callback(core,
+						       XC4000_TUNER_RESET, 0);
 		break;
 
 	case CX88_BOARD_TWINHAN_VP1027_DVBS:
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2e145f0a5fd..fbcaa1c5b09 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -636,6 +636,9 @@ int cx88_reset(struct cx88_core *core)
 	cx_write(MO_PCI_INTSTAT,   0xFFFFFFFF); // Clear PCI int
 	cx_write(MO_INT1_STAT,     0xFFFFFFFF); // Clear RISC int
 
+	/* set default notch filter */
+	cx_andor(MO_HTOTAL, 0x1800, (HLNotchFilter4xFsc << 11));
+
 	/* Reset on-board parts */
 	cx_write(MO_SRST_IO, 0);
 	msleep(10);
@@ -759,8 +762,8 @@ int cx88_set_scale(struct cx88_core *core, unsigned int width, unsigned int heig
 	if (nocomb)
 		value |= (3 << 5); // disable comb filter
 
-	cx_write(MO_FILTER_EVEN,  value);
-	cx_write(MO_FILTER_ODD,   value);
+	cx_andor(MO_FILTER_EVEN,  0x7ffc7f, value); /* preserve PEAKEN, PSEL */
+	cx_andor(MO_FILTER_ODD,   0x7ffc7f, value);
 	dprintk(1,"set_scale: filter  0x%04x\n", value);
 
 	return 0;
@@ -994,10 +997,10 @@ int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
 	// htotal
 	tmp64 = norm_htotal(norm) * (u64)vdec_clock;
 	do_div(tmp64, fsc8);
-	htotal = (u32)tmp64 | (HLNotchFilter4xFsc << 11);
+	htotal = (u32)tmp64;
 	dprintk(1,"set_tvnorm: MO_HTOTAL        0x%08x [old=0x%08x,htotal=%d]\n",
 		htotal, cx_read(MO_HTOTAL), (u32)tmp64);
-	cx_write(MO_HTOTAL, htotal);
+	cx_andor(MO_HTOTAL, 0x07ff, htotal);
 
 	// vbi stuff, set vbi offset to 10 (for 20 Clk*2 pixels), this makes
 	// the effective vbi offset ~244 samples, the same as the Bt8x8
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index c69df7ebb6a..cf3d33ab541 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -41,6 +41,7 @@
 #include "or51132.h"
 #include "lgdt330x.h"
 #include "s5h1409.h"
+#include "xc4000.h"
 #include "xc5000.h"
 #include "nxt200x.h"
 #include "cx24123.h"
@@ -63,6 +64,7 @@ MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
 MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 static unsigned int debug;
 module_param(debug, int, 0644);
@@ -605,6 +607,39 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 	return 0;
 }
 
+static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
+{
+	struct dvb_frontend *fe;
+	struct videobuf_dvb_frontend *fe0 = NULL;
+
+	/* Get the first frontend */
+	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
+		printk(KERN_ERR "%s/2: dvb frontend not attached. "
+				"Can't attach xc4000\n",
+		       dev->core->name);
+		return -EINVAL;
+	}
+
+	fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap,
+			cfg);
+	if (!fe) {
+		printk(KERN_ERR "%s/2: xc4000 attach failed\n",
+		       dev->core->name);
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "%s/2: xc4000 attached\n", dev->core->name);
+
+	return 0;
+}
+
 static int cx24116_set_ts_param(struct dvb_frontend *fe,
 	int is_punctured)
 {
@@ -1294,7 +1329,25 @@ static int dvb_register(struct cx8802_dev *dev)
 				goto frontend_detach;
 		}
 		break;
-	 case CX88_BOARD_GENIATECH_X8000_MT:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_pinnacle_hybrid_pctv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			struct xc4000_config cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc4000(dev, &cfg) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
 		dev->ts_gen_cntrl = 0x00;
 
 		fe0->dvb.frontend = dvb_attach(zl10353_attach,
@@ -1577,6 +1630,11 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
 		udelay(1000);
 		break;
 
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		/* set RF input to AIR for DVB-T (GPIO 16) */
+		cx_write(MO_GP2_IO, 0x0101);
+		break;
+
 	default:
 		err = -ENODEV;
 	}
@@ -1692,14 +1750,8 @@ static struct cx8802_driver cx8802_dvb_driver = {
 
 static int __init dvb_init(void)
 {
-	printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx88/2: cx2388x dvb driver version %s loaded\n",
+	       CX88_VERSION);
 	return cx8802_register_driver(&cx8802_dvb_driver);
 }
 
@@ -1710,10 +1762,3 @@ static void __exit dvb_fini(void)
 
 module_init(dvb_init);
 module_exit(dvb_fini);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * compile-command: "make DVB=1"
- * End:
- */
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 3f442003623..e614201b5ed 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -100,6 +100,8 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 		break;
 	case CX88_BOARD_WINFAST_DTV1000:
 	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
 	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
 		gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
 		auxgpio = gpio;
@@ -289,6 +291,8 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_WINFAST_DTV2000H:
 	case CX88_BOARD_WINFAST_DTV2000H_J:
 	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
 		ir_codes = RC_MAP_WINFAST;
 		ir->gpio_addr = MO_GP0_IO;
 		ir->mask_keycode = 0x8f8;
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index 1a7b983f829..cd5386ee210 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -39,6 +39,7 @@ MODULE_AUTHOR("Jelle Foks <jelle@foks.us>");
 MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 static unsigned int debug;
 module_param(debug,int,0644);
@@ -613,13 +614,17 @@ static int cx8802_request_acquire(struct cx8802_driver *drv)
 	    core->active_type_id != drv->type_id)
 		return -EBUSY;
 
-	core->input = 0;
-	for (i = 0;
-	     i < (sizeof(core->board.input) / sizeof(struct cx88_input));
-	     i++) {
-		if (core->board.input[i].type == CX88_VMUX_DVB) {
-			core->input = i;
-			break;
+	if (drv->type_id == CX88_MPEG_DVB) {
+		/* When switching to DVB, always set the input to the tuner */
+		core->last_analog_input = core->input;
+		core->input = 0;
+		for (i = 0;
+		     i < (sizeof(core->board.input) / sizeof(struct cx88_input));
+		     i++) {
+			if (core->board.input[i].type == CX88_VMUX_DVB) {
+				core->input = i;
+				break;
+			}
 		}
 	}
 
@@ -644,6 +649,12 @@ static int cx8802_request_release(struct cx8802_driver *drv)
 
 	if (drv->advise_release && --core->active_ref == 0)
 	{
+		if (drv->type_id == CX88_MPEG_DVB) {
+			/* If the DVB driver is releasing, reset the input
+			   state to the last configured analog input */
+			core->input = core->last_analog_input;
+		}
+
 		drv->advise_release(drv);
 		core->active_type_id = CX88_BOARD_NONE;
 		mpeg_dbg(1,"%s() Post release GPIO=%x\n", __func__, cx_read(MO_GP0_IO));
@@ -890,14 +901,8 @@ static struct pci_driver cx8802_pci_driver = {
 
 static int __init cx8802_init(void)
 {
-	printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %s loaded\n",
+	       CX88_VERSION);
 	return pci_register_driver(&cx8802_pci_driver);
 }
 
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index cef4f282e5a..60d28fdd779 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -45,6 +45,7 @@
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
 
 /* ------------------------------------------------------------------ */
 
@@ -220,7 +221,23 @@ static const struct cx88_ctrl cx8800_ctls[] = {
 		.reg                   = MO_UV_SATURATION,
 		.mask                  = 0x00ff,
 		.shift                 = 0,
-	},{
+	}, {
+		.v = {
+			.id            = V4L2_CID_SHARPNESS,
+			.name          = "Sharpness",
+			.minimum       = 0,
+			.maximum       = 4,
+			.step          = 1,
+			.default_value = 0x0,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 0,
+		/* NOTE: the value is converted and written to both even
+		   and odd registers in the code */
+		.reg                   = MO_FILTER_ODD,
+		.mask                  = 7 << 7,
+		.shift                 = 7,
+	}, {
 		.v = {
 			.id            = V4L2_CID_CHROMA_AGC,
 			.name          = "Chroma AGC",
@@ -245,6 +262,20 @@ static const struct cx88_ctrl cx8800_ctls[] = {
 		.mask                  = 1 << 9,
 		.shift                 = 9,
 	}, {
+		.v = {
+			.id            = V4L2_CID_BAND_STOP_FILTER,
+			.name          = "Notch filter",
+			.minimum       = 0,
+			.maximum       = 3,
+			.step          = 1,
+			.default_value = 0x0,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 0,
+		.reg                   = MO_HTOTAL,
+		.mask                  = 3 << 11,
+		.shift                 = 11,
+	}, {
 	/* --- audio --- */
 		.v = {
 			.id            = V4L2_CID_AUDIO_MUTE,
@@ -300,8 +331,10 @@ const u32 cx88_user_ctrls[] = {
 	V4L2_CID_AUDIO_VOLUME,
 	V4L2_CID_AUDIO_BALANCE,
 	V4L2_CID_AUDIO_MUTE,
+	V4L2_CID_SHARPNESS,
 	V4L2_CID_CHROMA_AGC,
 	V4L2_CID_COLOR_KILLER,
+	V4L2_CID_BAND_STOP_FILTER,
 	0
 };
 EXPORT_SYMBOL(cx88_user_ctrls);
@@ -962,6 +995,10 @@ int cx88_get_control (struct cx88_core  *core, struct v4l2_control *ctl)
 	case V4L2_CID_AUDIO_VOLUME:
 		ctl->value = 0x3f - (value & 0x3f);
 		break;
+	case V4L2_CID_SHARPNESS:
+		ctl->value = ((value & 0x0200) ? (((value & 0x0180) >> 7) + 1)
+						 : 0);
+		break;
 	default:
 		ctl->value = ((value + (c->off << c->shift)) & c->mask) >> c->shift;
 		break;
@@ -1039,6 +1076,12 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl)
 		}
 		mask=0xffff;
 		break;
+	case V4L2_CID_SHARPNESS:
+		/* 0b000, 0b100, 0b101, 0b110, or 0b111 */
+		value = (ctl->value < 1 ? 0 : ((ctl->value + 3) << 7));
+		/* needs to be set for both fields */
+		cx_andor(MO_FILTER_EVEN, mask, value);
+		break;
 	case V4L2_CID_CHROMA_AGC:
 		/* Do not allow chroma AGC to be enabled for SECAM */
 		value = ((ctl->value - c->off) << c->shift) & c->mask;
@@ -1161,7 +1204,6 @@ static int vidioc_querycap (struct file *file, void  *priv,
 	strcpy(cap->driver, "cx8800");
 	strlcpy(cap->card, core->board.name, sizeof(cap->card));
 	sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
-	cap->version = CX88_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE     |
@@ -1480,7 +1522,6 @@ static int radio_querycap (struct file *file, void  *priv,
 	strcpy(cap->driver, "cx8800");
 	strlcpy(cap->card, core->board.name, sizeof(cap->card));
 	sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci));
-	cap->version = CX88_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -2139,14 +2180,8 @@ static struct pci_driver cx8800_pci_driver = {
 
 static int __init cx8800_init(void)
 {
-	printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %d.%d.%d loaded\n",
-	       (CX88_VERSION_CODE >> 16) & 0xff,
-	       (CX88_VERSION_CODE >>  8) & 0xff,
-	       CX88_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %s loaded\n",
+	       CX88_VERSION);
 	return pci_register_driver(&cx8800_pci_driver);
 }
 
@@ -2157,11 +2192,3 @@ static void __exit cx8800_fini(void)
 
 module_init(cx8800_init);
 module_exit(cx8800_fini);
-
-/* ----------------------------------------------------------- */
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index a399a8b086b..fa8d307e1a3 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -39,9 +39,9 @@
 #include "cx88-reg.h"
 #include "tuner-xc2028.h"
 
-#include <linux/version.h>
 #include <linux/mutex.h>
-#define CX88_VERSION_CODE KERNEL_VERSION(0, 0, 8)
+
+#define CX88_VERSION "0.0.9"
 
 #define UNSET (-1U)
 
@@ -242,6 +242,8 @@ extern const struct sram_channel const cx88_sram_channels[];
 #define CX88_BOARD_SAMSUNG_SMT_7020        84
 #define CX88_BOARD_TWINHAN_VP1027_DVBS     85
 #define CX88_BOARD_TEVII_S464              86
+#define CX88_BOARD_WINFAST_DTV2000H_PLUS   87
+#define CX88_BOARD_WINFAST_DTV1800H_XC4000 88
 
 enum cx88_itype {
 	CX88_VMUX_COMPOSITE1 = 1,
@@ -375,6 +377,7 @@ struct cx88_core {
 	u32                        audiomode_manual;
 	u32                        audiomode_current;
 	u32                        input;
+	u32                        last_analog_input;
 	u32                        astat;
 	u32			   use_nicam;
 	unsigned long		   last_change;
diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig
index 6b195403564..60a456ebdc7 100644
--- a/drivers/media/video/davinci/Kconfig
+++ b/drivers/media/video/davinci/Kconfig
@@ -91,3 +91,26 @@ config VIDEO_ISIF
 
 	   To compile this driver as a module, choose M here: the
 	   module will be called vpfe.
+
+config VIDEO_DM644X_VPBE
+	tristate "DM644X VPBE HW module"
+	depends on ARCH_DAVINCI_DM644x
+	select VIDEO_VPSS_SYSTEM
+	select VIDEOBUF_DMA_CONTIG
+	help
+	    Enables VPBE modules used for display on a DM644x
+	    SoC.
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called vpbe.
+
+
+config VIDEO_VPBE_DISPLAY
+	tristate "VPBE V4L2 Display driver"
+	depends on ARCH_DAVINCI_DM644x
+	select VIDEO_DM644X_VPBE
+	help
+	    Enables VPBE V4L2 Display driver on a DM644x device
+
+	    To compile this driver as a module, choose M here: the
+	    module will be called vpbe_display.
diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index a37955745aa..ae7dafb689a 100644
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -16,3 +16,5 @@ obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
 obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
 obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o
 obj-$(CONFIG_VIDEO_ISIF) += isif.o
+obj-$(CONFIG_VIDEO_DM644X_VPBE) += vpbe.o vpbe_osd.o vpbe_venc.o
+obj-$(CONFIG_VIDEO_VPBE_DISPLAY) += vpbe_display.o
diff --git a/drivers/media/video/davinci/vpbe.c b/drivers/media/video/davinci/vpbe.c
new file mode 100644
index 00000000000..d773d30de22
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe.c
@@ -0,0 +1,864 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpss.h>
+#include <media/davinci/vpbe_venc.h>
+
+#define VPBE_DEFAULT_OUTPUT	"Composite"
+#define VPBE_DEFAULT_MODE	"ntsc"
+
+static char *def_output = VPBE_DEFAULT_OUTPUT;
+static char *def_mode = VPBE_DEFAULT_MODE;
+static int debug;
+
+module_param(def_output, charp, S_IRUGO);
+module_param(def_mode, charp, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
+MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/**
+ * vpbe_current_encoder_info - Get config info for current encoder
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Return ptr to current encoder config info
+ */
+static struct encoder_config_info*
+vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int index = vpbe_dev->current_sd_index;
+
+	return ((index == 0) ? &cfg->venc :
+				&cfg->ext_encoders[index-1]);
+}
+
+/**
+ * vpbe_find_encoder_sd_index - Given a name find encoder sd index
+ *
+ * @vpbe_config - ptr to vpbe cfg
+ * @output_index - index used by application
+ *
+ * Return sd index of the encoder
+ */
+static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
+			     int index)
+{
+	char *encoder_name = cfg->outputs[index].subdev_name;
+	int i;
+
+	/* Venc is always first	*/
+	if (!strcmp(encoder_name, cfg->venc.module_name))
+		return 0;
+
+	for (i = 0; i < cfg->num_ext_encoders; i++) {
+		if (!strcmp(encoder_name,
+		     cfg->ext_encoders[i].module_name))
+			return i+1;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_g_cropcap - Get crop capabilities of the display
+ * @vpbe_dev - vpbe device ptr
+ * @cropcap - cropcap is a ptr to struct v4l2_cropcap
+ *
+ * Update the crop capabilities in crop cap for current
+ * mode
+ */
+static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev,
+			  struct v4l2_cropcap *cropcap)
+{
+	if (NULL == cropcap)
+		return -EINVAL;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->defrect = cropcap->bounds;
+
+	return 0;
+}
+
+/**
+ * vpbe_enum_outputs - enumerate outputs
+ * @vpbe_dev - vpbe device ptr
+ * @output - ptr to v4l2_output structure
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
+			     struct v4l2_output *output)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int temp_index = output->index;
+
+	if (temp_index >= cfg->num_outputs)
+		return -EINVAL;
+
+	*output = cfg->outputs[temp_index].output;
+	output->index = temp_index;
+
+	return 0;
+}
+
+static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	if (NULL == mode)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(mode, var.name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
+				      struct vpbe_enc_mode_info *mode_info)
+{
+	if (NULL == mode_info)
+		return -EINVAL;
+
+	*mode_info = vpbe_dev->current_timings;
+
+	return 0;
+}
+
+static int vpbe_get_dv_preset_info(struct vpbe_device *vpbe_dev,
+				   unsigned int dv_preset)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_DV_PRESET) &&
+		  (var.timings.dv_preset == dv_preset)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/* Get std by std id */
+static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
+			     v4l2_std_id std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_STD) &&
+		  (var.timings.std_id & std_id)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
+				char *std_name)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(var.name, std_name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_output - Set output
+ * @vpbe_dev - vpbe device ptr
+ * @index - index of output
+ *
+ * Set vpbe output to the output specified by the index
+ */
+static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
+{
+	struct encoder_config_info *curr_enc_info =
+			vpbe_current_encoder_info(vpbe_dev);
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int enc_out_index;
+	int sd_index;
+	int ret = 0;
+
+	if (index >= cfg->num_outputs)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	sd_index = vpbe_dev->current_sd_index;
+	enc_out_index = cfg->outputs[index].output.index;
+	/*
+	 * Currently we switch the encoder based on output selected
+	 * by the application. If media controller is implemented later
+	 * there is will be an API added to setup_link between venc
+	 * and external encoder. So in that case below comparison always
+	 * match and encoder will not be switched. But if application
+	 * chose not to use media controller, then this provides current
+	 * way of switching encoder at the venc output.
+	 */
+	if (strcmp(curr_enc_info->module_name,
+		   cfg->outputs[index].subdev_name)) {
+		/* Need to switch the encoder at the output */
+		sd_index = vpbe_find_encoder_sd_index(cfg, index);
+		if (sd_index < 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (ret)
+			goto out;
+	}
+
+	/* Set output at the encoder */
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+				       s_routing, 0, enc_out_index, 0);
+	if (ret)
+		goto out;
+
+	/*
+	 * It is assumed that venc or extenal encoder will set a default
+	 * mode in the sub device. For external encoder or LCD pannel output,
+	 * we also need to set up the lcd port for the required mode. So setup
+	 * the lcd port for the default mode that is configured in the board
+	 * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
+	 * encoder.
+	 */
+	ret = vpbe_get_mode_info(vpbe_dev,
+				 cfg->outputs[index].default_mode);
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+			vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+		vpbe_dev->current_sd_index = sd_index;
+		vpbe_dev->current_out_index = index;
+	}
+out:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < cfg->num_outputs; i++) {
+		if (!strcmp(def_output,
+			    cfg->outputs[i].output.name)) {
+			ret = vpbe_set_output(vpbe_dev, i);
+			if (!ret)
+				vpbe_dev->current_out_index = i;
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * vpbe_get_output - Get output
+ * @vpbe_dev - vpbe device ptr
+ *
+ * return current vpbe output to the the index
+ */
+static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
+{
+	return vpbe_dev->current_out_index;
+}
+
+/**
+ * vpbe_s_dv_preset - Set the given preset timings in the encoder
+ *
+ * Sets the preset if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_dv_preset(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_preset *dv_preset)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+	    V4L2_OUT_CAP_PRESETS))
+		return -EINVAL;
+
+	ret = vpbe_get_dv_preset_info(vpbe_dev, dv_preset->preset);
+
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+					s_dv_preset, dv_preset);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_dv_preset - Get the preset in the current encoder
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_dv_preset(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_preset *dv_preset)
+{
+	if (vpbe_dev->current_timings.timings_type &
+	  VPBE_ENC_DV_PRESET) {
+		dv_preset->preset = vpbe_dev->current_timings.timings.dv_preset;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_enum_dv_presets - Enumerate the dv presets in the current encoder
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_enum_dv_presets(struct vpbe_device *vpbe_dev,
+			 struct v4l2_dv_enum_preset *preset_info)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	struct vpbe_output *output = &cfg->outputs[out_index];
+	int j = 0;
+	int i;
+
+	if (!(output->output.capabilities & V4L2_OUT_CAP_PRESETS))
+		return -EINVAL;
+
+	for (i = 0; i < output->num_modes; i++) {
+		if (output->modes[i].timings_type == VPBE_ENC_DV_PRESET) {
+			if (j == preset_info->index)
+				break;
+			j++;
+		}
+	}
+
+	if (i == output->num_modes)
+		return -EINVAL;
+
+	return v4l_fill_dv_preset_info(output->modes[i].timings.dv_preset,
+					preset_info);
+}
+
+/**
+ * vpbe_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+		V4L2_OUT_CAP_STD))
+		return -EINVAL;
+
+	ret = vpbe_get_std_info(vpbe_dev, *std_id);
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+			       s_std_output, *std_id);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_enc_mode_info cur_timings = vpbe_dev->current_timings;
+
+	if (cur_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = cur_timings.timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_mode - Set mode in the current encoder using mode info
+ *
+ * Use the mode string to decide what timings to set in the encoder
+ * This is typically useful when fbset command is used to change the current
+ * timings by specifying a string to indicate the timings.
+ */
+static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
+			 struct vpbe_enc_mode_info *mode_info)
+{
+	struct vpbe_enc_mode_info *preset_mode = NULL;
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct v4l2_dv_preset dv_preset;
+	struct osd_state *osd_device;
+	int out_index = vpbe_dev->current_out_index;
+	int ret = 0;
+	int i;
+
+	if ((NULL == mode_info) || (NULL == mode_info->name))
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
+		if (!strcmp(mode_info->name,
+		     cfg->outputs[out_index].modes[i].name)) {
+			preset_mode = &cfg->outputs[out_index].modes[i];
+			/*
+			 * it may be one of the 3 timings type. Check and
+			 * invoke right API
+			 */
+			if (preset_mode->timings_type & VPBE_ENC_STD)
+				return vpbe_s_std(vpbe_dev,
+						 &preset_mode->timings.std_id);
+			if (preset_mode->timings_type & VPBE_ENC_DV_PRESET) {
+				dv_preset.preset =
+					preset_mode->timings.dv_preset;
+				return vpbe_s_dv_preset(vpbe_dev, &dv_preset);
+			}
+		}
+	}
+
+	/* Only custom timing should reach here */
+	if (preset_mode == NULL)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	osd_device = vpbe_dev->osd_device;
+	vpbe_dev->current_timings = *preset_mode;
+	osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+	osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
+{
+	int ret;
+
+	ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
+	if (ret)
+		return ret;
+
+	/* set the default mode in the encoder */
+	return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
+}
+
+static int platform_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_device *vpbe_dev = data;
+
+	if (strcmp("vpbe-osd", pdev->name) == 0)
+		vpbe_dev->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+/**
+ * vpbe_initialize() - Initialize the vpbe display controller
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Master frame buffer device drivers calls this to initialize vpbe
+ * display controller. This will then registers v4l2 device and the sub
+ * devices and sets a current encoder sub device for display. v4l2 display
+ * device driver is the master and frame buffer display device driver is
+ * the slave. Frame buffer display driver checks the initialized during
+ * probe and exit if not initialized. Returns status.
+ */
+static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	struct encoder_config_info *enc_info;
+	struct v4l2_subdev **enc_subdev;
+	struct osd_state *osd_device;
+	struct i2c_adapter *i2c_adap;
+	int output_index;
+	int num_encoders;
+	int ret = 0;
+	int err;
+	int i;
+
+	/*
+	 * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
+	 * from the platform device by iteration of platform drivers and
+	 * matching with device name
+	 */
+	if (NULL == vpbe_dev || NULL == dev) {
+		printk(KERN_ERR "Null device pointers.\n");
+		return -ENODEV;
+	}
+
+	if (vpbe_dev->initialized)
+		return 0;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
+		/* We have dac clock available for platform */
+		vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
+		if (IS_ERR(vpbe_dev->dac_clk)) {
+			ret =  PTR_ERR(vpbe_dev->dac_clk);
+			goto vpbe_unlock;
+		}
+		if (clk_enable(vpbe_dev->dac_clk)) {
+			ret =  -ENODEV;
+			goto vpbe_unlock;
+		}
+	}
+
+	/* first enable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+
+	/* First register a v4l2 device */
+	ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(dev->driver,
+			"Unable to register v4l2 device.\n");
+		goto vpbe_fail_clock;
+	}
+	v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
+			       platform_device_get);
+	if (err < 0)
+		return err;
+
+	vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
+					   vpbe_dev->cfg->venc.module_name);
+	/* register venc sub device */
+	if (vpbe_dev->venc == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"vpbe unable to init venc sub device\n");
+		ret = -ENODEV;
+		goto vpbe_fail_v4l2_device;
+	}
+	/* initialize osd device */
+	osd_device = vpbe_dev->osd_device;
+
+	if (NULL != osd_device->ops.initialize) {
+		err = osd_device->ops.initialize(osd_device);
+		if (err) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "unable to initialize the OSD device");
+			err = -ENOMEM;
+			goto vpbe_fail_v4l2_device;
+		}
+	}
+
+	/*
+	 * Register any external encoders that are configured. At index 0 we
+	 * store venc sd index.
+	 */
+	num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
+	vpbe_dev->encoders = kmalloc(
+				sizeof(struct v4l2_subdev *)*num_encoders,
+				GFP_KERNEL);
+	if (NULL == vpbe_dev->encoders) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for encoders sub devices");
+		ret = -ENOMEM;
+		goto vpbe_fail_v4l2_device;
+	}
+
+	i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
+	for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
+		if (i == 0) {
+			/* venc is at index 0 */
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = vpbe_dev->venc;
+			continue;
+		}
+		enc_info = &vpbe_dev->cfg->ext_encoders[i];
+		if (enc_info->is_i2c) {
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = v4l2_i2c_new_subdev_board(
+						&vpbe_dev->v4l2_dev, i2c_adap,
+						&enc_info->board_info, NULL);
+			if (*enc_subdev)
+				v4l2_info(&vpbe_dev->v4l2_dev,
+					  "v4l2 sub device %s registered\n",
+					  enc_info->module_name);
+			else {
+				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
+					 " failed to register",
+					 enc_info->module_name);
+				ret = -ENODEV;
+				goto vpbe_fail_sd_register;
+			}
+		} else
+			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
+				 " currently not supported");
+	}
+
+	/* set the current encoder and output to that of venc by default */
+	vpbe_dev->current_sd_index = 0;
+	vpbe_dev->current_out_index = 0;
+	output_index = 0;
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	printk(KERN_NOTICE "Setting default output to %s\n", def_output);
+	ret = vpbe_set_default_output(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
+			 def_output);
+		return ret;
+	}
+
+	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
+	ret = vpbe_set_default_mode(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
+			 def_mode);
+		return ret;
+	}
+	vpbe_dev->initialized = 1;
+	/* TBD handling of bootargs for default output and mode */
+	return 0;
+
+vpbe_fail_sd_register:
+	kfree(vpbe_dev->encoders);
+vpbe_fail_v4l2_device:
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+vpbe_fail_clock:
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
+		clk_put(vpbe_dev->dac_clk);
+vpbe_unlock:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+/**
+ * vpbe_deinitialize() - de-initialize the vpbe display controller
+ * @dev - Master and slave device ptr
+ *
+ * vpbe_master and slave frame buffer devices calls this to de-initialize
+ * the display controller. It is called when master and slave device
+ * driver modules are removed and no longer requires the display controller.
+ */
+static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0)
+		clk_put(vpbe_dev->dac_clk);
+
+	kfree(vpbe_dev->encoders);
+	vpbe_dev->initialized = 0;
+	/* disable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
+}
+
+static struct vpbe_device_ops vpbe_dev_ops = {
+	.g_cropcap = vpbe_g_cropcap,
+	.enum_outputs = vpbe_enum_outputs,
+	.set_output = vpbe_set_output,
+	.get_output = vpbe_get_output,
+	.s_dv_preset = vpbe_s_dv_preset,
+	.g_dv_preset = vpbe_g_dv_preset,
+	.enum_dv_presets = vpbe_enum_dv_presets,
+	.s_std = vpbe_s_std,
+	.g_std = vpbe_g_std,
+	.initialize = vpbe_initialize,
+	.deinitialize = vpbe_deinitialize,
+	.get_mode_info = vpbe_get_current_mode_info,
+	.set_mode = vpbe_set_mode,
+};
+
+static __devinit int vpbe_probe(struct platform_device *pdev)
+{
+	struct vpbe_device *vpbe_dev;
+	struct vpbe_config *cfg;
+	int ret = -EINVAL;
+
+	if (pdev->dev.platform_data == NULL) {
+		v4l2_err(pdev->dev.driver, "No platform data\n");
+		return -ENODEV;
+	}
+	cfg = pdev->dev.platform_data;
+
+	if (!cfg->module_name[0] ||
+	    !cfg->osd.module_name[0] ||
+	    !cfg->venc.module_name[0]) {
+		v4l2_err(pdev->dev.driver, "vpbe display module names not"
+			 " defined\n");
+		return ret;
+	}
+
+	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
+	if (vpbe_dev == NULL) {
+		v4l2_err(pdev->dev.driver, "Unable to allocate memory"
+			 " for vpbe_device\n");
+		return -ENOMEM;
+	}
+	vpbe_dev->cfg = cfg;
+	vpbe_dev->ops = vpbe_dev_ops;
+	vpbe_dev->pdev = &pdev->dev;
+
+	if (cfg->outputs->num_modes > 0)
+		vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
+	else
+		return -ENODEV;
+
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpbe_dev);
+	mutex_init(&vpbe_dev->lock);
+
+	return 0;
+}
+
+static int vpbe_remove(struct platform_device *device)
+{
+	struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
+
+	kfree(vpbe_dev);
+
+	return 0;
+}
+
+static struct platform_driver vpbe_driver = {
+	.driver	= {
+		.name	= "vpbe_controller",
+		.owner	= THIS_MODULE,
+	},
+	.probe = vpbe_probe,
+	.remove = vpbe_remove,
+};
+
+/**
+ * vpbe_init: initialize the vpbe driver
+ *
+ * This function registers device and driver to the kernel
+ */
+static __init int vpbe_init(void)
+{
+	return platform_driver_register(&vpbe_driver);
+}
+
+/**
+ * vpbe_cleanup : cleanup function for vpbe driver
+ *
+ * This will un-registers the device and driver to the kernel
+ */
+static void vpbe_cleanup(void)
+{
+	platform_driver_unregister(&vpbe_driver);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpbe_init);
+module_exit(vpbe_cleanup);
diff --git a/drivers/media/video/davinci/vpbe_display.c b/drivers/media/video/davinci/vpbe_display.c
new file mode 100644
index 00000000000..7f1d83a6d57
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_display.c
@@ -0,0 +1,1860 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <mach/cputype.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_display.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_osd.h>
+#include "vpbe_venc_regs.h"
+
+#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
+
+static int debug;
+
+#define VPBE_DISPLAY_SD_BUF_SIZE (720*576*2)
+#define VPBE_DEFAULT_NUM_BUFS 3
+
+module_param(debug, int, 0644);
+
+static int venc_is_second_field(struct vpbe_display *disp_dev)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int ret;
+	int val;
+
+	ret = v4l2_subdev_call(vpbe_dev->venc,
+			       core,
+			       ioctl,
+			       VENC_GET_FLD,
+			       &val);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			 "Error in getting Field ID 0\n");
+	}
+	return val;
+}
+
+static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct timespec timevalue;
+
+	if (layer->cur_frm == layer->next_frm)
+		return;
+	ktime_get_ts(&timevalue);
+	layer->cur_frm->ts.tv_sec = timevalue.tv_sec;
+	layer->cur_frm->ts.tv_usec = timevalue.tv_nsec / NSEC_PER_USEC;
+	layer->cur_frm->state = VIDEOBUF_DONE;
+	wake_up_interruptible(&layer->cur_frm->done);
+	/* Make cur_frm pointing to next_frm */
+	layer->cur_frm = layer->next_frm;
+}
+
+static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct osd_state *osd_device = disp_obj->osd_device;
+	unsigned long addr;
+
+	spin_lock(&disp_obj->dma_queue_lock);
+	if (list_empty(&layer->dma_queue) ||
+		(layer->cur_frm != layer->next_frm)) {
+		spin_unlock(&disp_obj->dma_queue_lock);
+		return;
+	}
+	/*
+	 * one field is displayed configure
+	 * the next frame if it is available
+	 * otherwise hold on current frame
+	 * Get next from the buffer queue
+	 */
+	layer->next_frm = list_entry(
+				layer->dma_queue.next,
+				struct  videobuf_buffer,
+				queue);
+	/* Remove that from the buffer queue */
+	list_del(&layer->next_frm->queue);
+	spin_unlock(&disp_obj->dma_queue_lock);
+	/* Mark state of the frame to active */
+	layer->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(layer->next_frm);
+	osd_device->ops.start_layer(osd_device,
+			layer->layer_info.id,
+			addr,
+			disp_obj->cbcr_ofst);
+}
+
+/* interrupt service routine */
+static irqreturn_t venc_isr(int irq, void *arg)
+{
+	struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
+	struct vpbe_layer *layer;
+	static unsigned last_event;
+	unsigned event = 0;
+	int fid;
+	int i;
+
+	if ((NULL == arg) || (NULL == disp_dev->dev[0]))
+		return IRQ_HANDLED;
+
+	if (venc_is_second_field(disp_dev))
+		event |= VENC_SECOND_FIELD;
+	else
+		event |= VENC_FIRST_FIELD;
+
+	if (event == (last_event & ~VENC_END_OF_FRAME)) {
+		/*
+		* If the display is non-interlaced, then we need to flag the
+		* end-of-frame event at every interrupt regardless of the
+		* value of the FIDST bit.  We can conclude that the display is
+		* non-interlaced if the value of the FIDST bit is unchanged
+		* from the previous interrupt.
+		*/
+		event |= VENC_END_OF_FRAME;
+	} else if (event == VENC_SECOND_FIELD) {
+		/* end-of-frame for interlaced display */
+		event |= VENC_END_OF_FRAME;
+	}
+	last_event = event;
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		layer = disp_dev->dev[i];
+		/* If streaming is started in this layer */
+		if (!layer->started)
+			continue;
+
+		if (layer->layer_first_int) {
+			layer->layer_first_int = 0;
+			continue;
+		}
+		/* Check the field format */
+		if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
+			(event & VENC_END_OF_FRAME)) {
+			/* Progressive mode */
+
+			vpbe_isr_even_field(disp_dev, layer);
+			vpbe_isr_odd_field(disp_dev, layer);
+		} else {
+		/* Interlaced mode */
+
+			layer->field_id ^= 1;
+			if (event & VENC_FIRST_FIELD)
+				fid = 0;
+			else
+				fid = 1;
+
+			/*
+			* If field id does not match with store
+			* field id
+			*/
+			if (fid != layer->field_id) {
+				/* Make them in sync */
+				layer->field_id = fid;
+				continue;
+			}
+			/*
+			* device field id and local field id are
+			* in sync. If this is even field
+			*/
+			if (0 == fid)
+				vpbe_isr_even_field(disp_dev, layer);
+			else  /* odd field */
+				vpbe_isr_odd_field(disp_dev, layer);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * vpbe_buffer_prepare()
+ * This is the callback function called from videobuf_qbuf() function
+ * the buffer is prepared and user space virtual address is converted into
+ * physical address
+ */
+static int vpbe_buffer_prepare(struct videobuf_queue *q,
+				  struct videobuf_buffer *vb,
+				  enum v4l2_field field)
+{
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"vpbe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = layer->pix_fmt.width;
+		vb->height = layer->pix_fmt.height;
+		vb->size = layer->pix_fmt.sizeimage;
+		vb->field = field;
+
+		ret = videobuf_iolock(q, vb, NULL);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev, "Failed to map \
+				user address\n");
+			return -EINVAL;
+		}
+
+		addr = videobuf_to_dma_contig(vb);
+
+		if (q->streaming) {
+			if (!IS_ALIGNED(addr, 8)) {
+				v4l2_err(&vpbe_dev->v4l2_dev,
+					"buffer_prepare:offset is \
+					not aligned to 32 bytes\n");
+				return -EINVAL;
+			}
+		}
+		vb->state = VIDEOBUF_PREPARED;
+	}
+	return 0;
+}
+
+/*
+ * vpbe_buffer_setup()
+ * This function allocates memory for the buffers
+ */
+static int vpbe_buffer_setup(struct videobuf_queue *q,
+				unsigned int *count,
+				unsigned int *size)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
+
+	*size = layer->pix_fmt.sizeimage;
+
+	/* Store number of buffers allocated in numbuffer member */
+	if (*count < VPBE_DEFAULT_NUM_BUFS)
+		*count = layer->numbuffers = VPBE_DEFAULT_NUM_BUFS;
+
+	return 0;
+}
+
+/*
+ * vpbe_buffer_queue()
+ * This function adds the buffer to DMA queue
+ */
+static void vpbe_buffer_queue(struct videobuf_queue *q,
+				 struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&disp->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &layer->dma_queue);
+	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+/*
+ * vpbe_buffer_release()
+ * This function is called from the videobuf layer to free memory allocated to
+ * the buffers
+ */
+static void vpbe_buffer_release(struct videobuf_queue *q,
+				   struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_fh *fh = q->priv_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_release\n");
+
+	if (V4L2_MEMORY_USERPTR != layer->memory)
+		videobuf_dma_contig_free(q, vb);
+
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops video_qops = {
+	.buf_setup = vpbe_buffer_setup,
+	.buf_prepare = vpbe_buffer_prepare,
+	.buf_queue = vpbe_buffer_queue,
+	.buf_release = vpbe_buffer_release,
+};
+
+static
+struct vpbe_layer*
+_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	enum vpbe_display_device_id thiswin, otherwin;
+	thiswin = layer->device_id;
+
+	otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
+	VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
+	return disp_dev->dev[otherwin];
+}
+
+static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	addr = videobuf_to_dma_contig(layer->cur_frm);
+	/* Set address in the display registers */
+	osd_device->ops.start_layer(osd_device,
+				    layer->layer_info.id,
+				    addr,
+				    disp_dev->cbcr_ofst);
+
+	ret = osd_device->ops.enable_layer(osd_device,
+				layer->layer_info.id, 0);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in enabling osd window layer 0\n");
+		return -1;
+	}
+
+	/* Enable the window */
+	layer->layer_info.enable = 1;
+	if (cfg->pixfmt == PIXFMT_NV12) {
+		struct vpbe_layer *otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+
+		ret = osd_device->ops.enable_layer(osd_device,
+				otherlayer->layer_info.id, 1);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in enabling osd window layer 1\n");
+			return -1;
+		}
+		otherlayer->layer_info.enable = 1;
+	}
+	return 0;
+}
+
+static void
+vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int expected_xsize, int expected_ysize)
+{
+	struct display_layer_info *layer_info = &layer->layer_info;
+	struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int calculated_xsize;
+	int h_exp = 0;
+	int v_exp = 0;
+	int h_scale;
+	int v_scale;
+
+	v4l2_std_id standard_id = vpbe_dev->current_timings.timings.std_id;
+
+	/*
+	 * Application initially set the image format. Current display
+	 * size is obtained from the vpbe display controller. expected_xsize
+	 * and expected_ysize are set through S_CROP ioctl. Based on this,
+	 * driver will calculate the scale factors for vertical and
+	 * horizontal direction so that the image is displayed scaled
+	 * and expanded. Application uses expansion to display the image
+	 * in a square pixel. Otherwise it is displayed using displays
+	 * pixel aspect ratio.It is expected that application chooses
+	 * the crop coordinates for cropped or scaled display. if crop
+	 * size is less than the image size, it is displayed cropped or
+	 * it is displayed scaled and/or expanded.
+	 *
+	 * to begin with, set the crop window same as expected. Later we
+	 * will override with scaled window size
+	 */
+
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	layer_info->h_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->v_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->h_exp = H_EXP_OFF;	/* no horizontal zoom */
+	layer_info->v_exp = V_EXP_OFF;	/* no horizontal zoom */
+
+	if (pixfmt->width < expected_xsize) {
+		h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
+		if (h_scale < 2)
+			h_scale = 1;
+		else if (h_scale >= 4)
+			h_scale = 4;
+		else
+			h_scale = 2;
+		cfg->xsize *= h_scale;
+		if (cfg->xsize < expected_xsize) {
+			if ((standard_id & V4L2_STD_525_60) ||
+			(standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->xsize *
+					VPBE_DISPLAY_H_EXP_RATIO_N) /
+					VPBE_DISPLAY_H_EXP_RATIO_D;
+				if (calculated_xsize <= expected_xsize) {
+					h_exp = 1;
+					cfg->xsize = calculated_xsize;
+				}
+			}
+		}
+		if (h_scale == 2)
+			layer_info->h_zoom = ZOOM_X2;
+		else if (h_scale == 4)
+			layer_info->h_zoom = ZOOM_X4;
+		if (h_exp)
+			layer_info->h_exp = H_EXP_9_OVER_8;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->xsize = expected_xsize;
+	}
+
+	if (pixfmt->height < expected_ysize) {
+		v_scale = expected_ysize / pixfmt->height;
+		if (v_scale < 2)
+			v_scale = 1;
+		else if (v_scale >= 4)
+			v_scale = 4;
+		else
+			v_scale = 2;
+		cfg->ysize *= v_scale;
+		if (cfg->ysize < expected_ysize) {
+			if ((standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->ysize *
+					VPBE_DISPLAY_V_EXP_RATIO_N) /
+					VPBE_DISPLAY_V_EXP_RATIO_D;
+				if (calculated_xsize <= expected_ysize) {
+					v_exp = 1;
+					cfg->ysize = calculated_xsize;
+				}
+			}
+		}
+		if (v_scale == 2)
+			layer_info->v_zoom = ZOOM_X2;
+		else if (v_scale == 4)
+			layer_info->v_zoom = ZOOM_X4;
+		if (v_exp)
+			layer_info->h_exp = V_EXP_6_OVER_5;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->ysize = expected_ysize;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"crop display xsize = %d, ysize = %d\n",
+		cfg->xsize, cfg->ysize);
+}
+
+static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int top, int left)
+{
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	cfg->xpos = min((unsigned int)left,
+			vpbe_dev->current_timings.xres - cfg->xsize);
+	cfg->ypos = min((unsigned int)top,
+			vpbe_dev->current_timings.yres - cfg->ysize);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"new xpos = %d, ypos = %d\n",
+		cfg->xpos, cfg->ypos);
+}
+
+static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
+			struct v4l2_rect *c)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	if ((c->width == 0) ||
+	  ((c->width + c->left) > vpbe_dev->current_timings.xres))
+		c->width = vpbe_dev->current_timings.xres - c->left;
+
+	if ((c->height == 0) || ((c->height + c->top) >
+	  vpbe_dev->current_timings.yres))
+		c->height = vpbe_dev->current_timings.yres - c->top;
+
+	/* window height must be even for interlaced display */
+	if (vpbe_dev->current_timings.interlaced)
+		c->height &= (~0x01);
+
+}
+
+/**
+ * vpbe_try_format()
+ * If user application provides width and height, and have bytesperline set
+ * to zero, driver calculates bytesperline and sizeimage based on hardware
+ * limits.
+ */
+static int vpbe_try_format(struct vpbe_display *disp_dev,
+			struct v4l2_pix_format *pixfmt, int check)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int min_height = 1;
+	int min_width = 32;
+	int max_height;
+	int max_width;
+	int bpp;
+
+	if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
+	    (pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
+		/* choose default as V4L2_PIX_FMT_UYVY */
+		pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	/* Check the field format */
+	if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
+		(pixfmt->field != V4L2_FIELD_NONE)) {
+		if (vpbe_dev->current_timings.interlaced)
+			pixfmt->field = V4L2_FIELD_INTERLACED;
+		else
+			pixfmt->field = V4L2_FIELD_NONE;
+	}
+
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		min_height = 2;
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		bpp = 1;
+	else
+		bpp = 2;
+
+	max_width = vpbe_dev->current_timings.xres;
+	max_height = vpbe_dev->current_timings.yres;
+
+	min_width /= bpp;
+
+	if (!pixfmt->width || (pixfmt->width < min_width) ||
+		(pixfmt->width > max_width)) {
+		pixfmt->width = vpbe_dev->current_timings.xres;
+	}
+
+	if (!pixfmt->height || (pixfmt->height  < min_height) ||
+		(pixfmt->height  > max_height)) {
+		pixfmt->height = vpbe_dev->current_timings.yres;
+	}
+
+	if (pixfmt->bytesperline < (pixfmt->width * bpp))
+		pixfmt->bytesperline = pixfmt->width * bpp;
+
+	/* Make the bytesperline 32 byte aligned */
+	pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
+				(pixfmt->bytesperline * pixfmt->height >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	return 0;
+}
+
+static int vpbe_display_g_priority(struct file *file, void *priv,
+				enum v4l2_priority *p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+
+	*p = v4l2_prio_max(&layer->prio);
+
+	return 0;
+}
+
+static int vpbe_display_s_priority(struct file *file, void *priv,
+				enum v4l2_priority p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	int ret;
+
+	ret = v4l2_prio_change(&layer->prio, &fh->prio, p);
+
+	return ret;
+}
+
+static int vpbe_display_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	cap->version = VPBE_DISPLAY_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, VPBE_DISPLAY_DRIVER, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int vpbe_display_s_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_S_CROP, layer id = %d\n", layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	if (rect->top < 0)
+		rect->top = 0;
+	if (rect->left < 0)
+		rect->left = 0;
+
+	vpbe_disp_check_window_params(disp_dev, rect);
+
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	vpbe_disp_calculate_scale_factor(disp_dev, layer,
+					rect->width,
+					rect->height);
+	vpbe_disp_adj_position(disp_dev, layer, rect->top,
+					rect->left);
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in set layer config:\n");
+		return -EINVAL;
+	}
+
+	/* apply zooming and h or v expansion */
+	osd_device->ops.set_zoom(osd_device,
+			layer->layer_info.id,
+			layer->layer_info.h_zoom,
+			layer->layer_info.v_zoom);
+	ret = osd_device->ops.set_vid_expansion(osd_device,
+			layer->layer_info.h_exp,
+			layer->layer_info.v_exp);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"Error in set vid expansion:\n");
+		return -EINVAL;
+	}
+
+	if ((layer->layer_info.h_zoom != ZOOM_X1) ||
+		(layer->layer_info.v_zoom != ZOOM_X1) ||
+		(layer->layer_info.h_exp != H_EXP_OFF) ||
+		(layer->layer_info.v_exp != V_EXP_OFF))
+		/* Enable expansion filter */
+		osd_device->ops.set_interpolation_filter(osd_device, 1);
+	else
+		osd_device->ops.set_interpolation_filter(osd_device, 0);
+
+	return 0;
+}
+
+static int vpbe_display_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = fh->disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_CROP, layer id = %d\n",
+			layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		ret = -EINVAL;
+	}
+	osd_device->ops.get_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	rect->top = cfg->ypos;
+	rect->left = cfg->xpos;
+	rect->width = cfg->xsize;
+	rect->height = cfg->ysize;
+
+	return 0;
+}
+
+static int vpbe_display_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *cropcap)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
+
+	cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->pixelaspect = vpbe_dev->current_timings.aspect;
+	cropcap->defrect = cropcap->bounds;
+	return 0;
+}
+
+static int vpbe_display_g_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If buffer type is video output */
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Fill in the information about format */
+	fmt->fmt.pix = layer->pix_fmt;
+
+	return 0;
+}
+
+static int vpbe_display_enum_fmt(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned int index = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"VIDIOC_ENUM_FMT, layer id = %d\n",
+				layer->device_id);
+	if (fmt->index > 1) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	index = fmt->index;
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = index;
+	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	if (index == 0) {
+		strcpy(fmt->description, "YUV 4:2:2 - UYVY");
+		fmt->pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		strcpy(fmt->description, "Y/CbCr 4:2:0");
+		fmt->pixelformat = V4L2_PIX_FMT_NV12;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_S_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Check for valid pixel format */
+	ret = vpbe_try_format(disp_dev, pixfmt, 1);
+	if (ret)
+		return ret;
+
+	/* YUV420 is requested, check availability of the
+	other video window */
+
+	layer->pix_fmt = *pixfmt;
+
+	/* Get osd layer config */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+	/* Store the pixel format in the layer object */
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	cfg->line_length = pixfmt->bytesperline;
+	cfg->ypos = 0;
+	cfg->xpos = 0;
+	cfg->interlaced = vpbe_dev->current_timings.interlaced;
+
+	if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
+		cfg->pixfmt = PIXFMT_YCbCrI;
+
+	/* Change of the default pixel format for both video windows */
+	if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
+		struct vpbe_layer *otherlayer;
+		cfg->pixfmt = PIXFMT_NV12;
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
+								layer);
+		otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
+	}
+
+	/* Set the layer config in the osd window */
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in S_FMT params:\n");
+		return -EINVAL;
+	}
+
+	/* Readback and fill the local copy of current pix format */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	return 0;
+}
+
+static int vpbe_display_try_fmt(struct file *file, void *priv,
+				  struct v4l2_format *fmt)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+
+	/* Check for valid field format */
+	return  vpbe_try_format(disp_dev, pixfmt, 0);
+
+}
+
+/**
+ * vpbe_display_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_display_s_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (NULL != vpbe_dev->ops.s_std) {
+		ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
+		if (ret) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set standard for sub devices\n");
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_display_g_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_G_STD\n");
+
+	/* Get the standard from the current encoder */
+	if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = vpbe_dev->current_timings.timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_display_enum_output - enumerate outputs
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_display_enum_output(struct file *file, void *priv,
+				    struct v4l2_output *output)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_ENUM_OUTPUT\n");
+
+	/* Enumerate outputs */
+
+	if (NULL == vpbe_dev->ops.enum_outputs)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
+	if (ret) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"Failed to enumerate outputs\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_output - Set output to
+ * the output specified by the index
+ */
+static int vpbe_display_s_output(struct file *file, void *priv,
+				unsigned int i)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_S_OUTPUT\n");
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+	if (NULL == vpbe_dev->ops.set_output)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.set_output(vpbe_dev, i);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set output for sub devices\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_output - Get output from subdevice
+ * for a given by the index
+ */
+static int vpbe_display_g_output(struct file *file, void *priv,
+				unsigned int *i)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
+	/* Get the standard from the current encoder */
+	*i = vpbe_dev->current_out_index;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_enum_dv_presets - Enumerate the dv presets
+ *
+ * enum the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_enum_dv_presets(struct file *file, void *priv,
+			struct v4l2_dv_enum_preset *preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_PRESETS\n");
+
+	/* Enumerate outputs */
+	if (NULL == vpbe_dev->ops.enum_dv_presets)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_dv_presets(vpbe_dev, preset);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to enumerate dv presets info\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_dv_preset - Set the dv presets
+ *
+ * Set the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_s_dv_preset(struct file *file, void *priv,
+				struct v4l2_dv_preset *preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_PRESETS\n");
+
+
+	/* If streaming is started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Set the given standard in the encoder */
+	if (NULL != vpbe_dev->ops.s_dv_preset)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.s_dv_preset(vpbe_dev, preset);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set the dv presets info\n");
+		return -EINVAL;
+	}
+	/* set the current norm to zero to be consistent. If STD is used
+	 * v4l2 layer will set the norm properly on successful s_std call
+	 */
+	layer->video_dev.current_norm = 0;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_dv_preset - Set the dv presets
+ *
+ * Get the preset in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_g_dv_preset(struct file *file, void *priv,
+				struct v4l2_dv_preset *dv_preset)
+{
+	struct vpbe_fh *fh = priv;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_PRESETS\n");
+
+	/* Get the given standard in the encoder */
+
+	if (vpbe_dev->current_timings.timings_type &
+				VPBE_ENC_DV_PRESET) {
+		dv_preset->preset =
+			vpbe_dev->current_timings.timings.dv_preset;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_streamoff(struct file *file, void *priv,
+				enum v4l2_buf_type buf_type)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = fh->disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_STREAMOFF,layer id = %d\n",
+			layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "streaming not started in layer"
+			" id = %d\n", layer->device_id);
+		return -EINVAL;
+	}
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+	layer->started = 0;
+	ret = videobuf_streamoff(&layer->buffer_queue);
+
+	return ret;
+}
+
+static int vpbe_display_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_STREAMON, layerid=%d\n",
+						layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf_type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+	/* If Streaming is already started, return error */
+	if (layer->started) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "layer is already streaming\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Call videobuf_streamon to start streaming
+	 * in videobuf
+	 */
+	ret = videobuf_streamon(&layer->buffer_queue);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"error in videobuf_streamon\n");
+		return ret;
+	}
+	/* If buffer queue is empty, return error */
+	if (list_empty(&layer->dma_queue)) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n");
+		goto streamoff;
+	}
+	/* Get the next frame from the buffer queue */
+	layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
+				struct videobuf_buffer, queue);
+	/* Remove buffer from the buffer queue */
+	list_del(&layer->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	layer->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	layer->field_id = 0;
+
+	/* Set parameters in OSD and VENC */
+	ret = vpbe_set_osd_display_params(disp_dev, layer);
+	if (ret < 0)
+		goto streamoff;
+
+	/*
+	 * if request format is yuv420 semiplanar, need to
+	 * enable both video windows
+	 */
+	layer->started = 1;
+
+	layer->layer_first_int = 1;
+
+	return ret;
+streamoff:
+	ret = videobuf_streamoff(&layer->buffer_queue);
+	return ret;
+}
+
+static int vpbe_display_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_DQBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+	/* If this file handle is not allowed to do IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+	if (file->f_flags & O_NONBLOCK)
+		/* Call videobuf_dqbuf for non blocking mode */
+		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 1);
+	else
+		/* Call videobuf_dqbuf for blocking mode */
+		ret = videobuf_dqbuf(&layer->buffer_queue, buf, 0);
+
+	return ret;
+}
+
+static int vpbe_display_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_QBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != p->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If this file handle is not allowed to do IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "No io_allowed\n");
+		return -EACCES;
+	}
+
+	return videobuf_qbuf(&layer->buffer_queue, p);
+}
+
+static int vpbe_display_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_QUERYBUF, layer id = %d\n",
+		layer->device_id);
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* Call videobuf_querybuf to get information */
+	ret = videobuf_querybuf(&layer->buffer_queue, buf);
+
+	return ret;
+}
+
+static int vpbe_display_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != req_buf->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	/* If io users of the layer is not zero, return error */
+	if (0 != layer->io_usrs) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "not IO user\n");
+		return -EBUSY;
+	}
+	/* Initialize videobuf queue as per the buffer type */
+	videobuf_queue_dma_contig_init(&layer->buffer_queue,
+				&video_qops,
+				vpbe_dev->pdev,
+				&layer->irqlock,
+				V4L2_BUF_TYPE_VIDEO_OUTPUT,
+				layer->pix_fmt.field,
+				sizeof(struct videobuf_buffer),
+				fh, NULL);
+
+	/* Set io allowed member of file handle to TRUE */
+	fh->io_allowed = 1;
+	/* Increment io usrs member of layer object to 1 */
+	layer->io_usrs = 1;
+	/* Store type of memory requested in layer object */
+	layer->memory = req_buf->memory;
+	/* Initialize buffer queue */
+	INIT_LIST_HEAD(&layer->dma_queue);
+	/* Allocate buffers */
+	ret = videobuf_reqbufs(&layer->buffer_queue, req_buf);
+
+	return ret;
+}
+
+/*
+ * vpbe_display_mmap()
+ * It is used to map kernel space buffers into user spaces
+ */
+static int vpbe_display_mmap(struct file *filep, struct vm_area_struct *vma)
+{
+	/* Get the layer object and file handle object */
+	struct vpbe_fh *fh = filep->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_mmap\n");
+
+	return videobuf_mmap_mapper(&layer->buffer_queue, vma);
+}
+
+/* vpbe_display_poll(): It is used for select/poll system call
+ */
+static unsigned int vpbe_display_poll(struct file *filep, poll_table *wait)
+{
+	struct vpbe_fh *fh = filep->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
+	unsigned int err = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_poll\n");
+	if (layer->started)
+		err = videobuf_poll_stream(filep, &layer->buffer_queue, wait);
+	return err;
+}
+
+/*
+ * vpbe_display_open()
+ * It creates object of file handle structure and stores it in private_data
+ * member of filepointer
+ */
+static int vpbe_display_open(struct file *file)
+{
+	struct vpbe_fh *fh = NULL;
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int err;
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpbe_fh), GFP_KERNEL);
+	if (fh == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display open plane = %d\n",
+			layer->device_id);
+
+	/* store pointer to fh in private_data member of filep */
+	file->private_data = fh;
+	fh->layer = layer;
+	fh->disp_dev = disp_dev;
+
+	if (!layer->usrs) {
+
+		/* First claim the layer for this device */
+		err = osd_device->ops.request_layer(osd_device,
+						layer->layer_info.id);
+		if (err < 0) {
+			/* Couldn't get layer */
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Display Manager failed to allocate layer\n");
+			kfree(fh);
+			return -EINVAL;
+		}
+	}
+	/* Increment layer usrs counter */
+	layer->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&layer->prio, &fh->prio);
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display device opened successfully\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_release()
+ * This function deletes buffer queue, frees the buffers and the davinci
+ * display file * handle
+ */
+static int vpbe_display_release(struct file *file)
+{
+	/* Get the layer object and file handle object */
+	struct vpbe_fh *fh = file->private_data;
+	struct vpbe_layer *layer = fh->layer;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_display *disp_dev = fh->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
+
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		/* Reset io_usrs member of layer object */
+		layer->io_usrs = 0;
+
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		layer->started = 0;
+		/* Free buffers allocated */
+		videobuf_queue_cancel(&layer->buffer_queue);
+		videobuf_mmap_free(&layer->buffer_queue);
+	}
+
+	/* Decrement layer usrs counter */
+	layer->usrs--;
+	/* If this file handle has initialize encoder device, reset it */
+	if (!layer->usrs) {
+		if (cfg->pixfmt == PIXFMT_NV12) {
+			struct vpbe_layer *otherlayer;
+			otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+			osd_device->ops.disable_layer(osd_device,
+					otherlayer->layer_info.id);
+			osd_device->ops.release_layer(osd_device,
+					otherlayer->layer_info.id);
+		}
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		osd_device->ops.release_layer(osd_device,
+				layer->layer_info.id);
+	}
+	/* Close the priority */
+	v4l2_prio_close(&layer->prio, fh->prio);
+	file->private_data = NULL;
+
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+
+	disp_dev->cbcr_ofst = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vpbe_display_g_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	struct v4l2_dbg_match *match = &reg->match;
+
+	if (match->type >= 2) {
+		v4l2_subdev_call(vpbe_dev->venc,
+				 core,
+				 g_register,
+				 reg);
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	return 0;
+}
+#endif
+
+/* vpbe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
+	.vidioc_querycap	 = vpbe_display_querycap,
+	.vidioc_g_fmt_vid_out    = vpbe_display_g_fmt,
+	.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
+	.vidioc_s_fmt_vid_out    = vpbe_display_s_fmt,
+	.vidioc_try_fmt_vid_out  = vpbe_display_try_fmt,
+	.vidioc_reqbufs		 = vpbe_display_reqbufs,
+	.vidioc_querybuf	 = vpbe_display_querybuf,
+	.vidioc_qbuf		 = vpbe_display_qbuf,
+	.vidioc_dqbuf		 = vpbe_display_dqbuf,
+	.vidioc_streamon	 = vpbe_display_streamon,
+	.vidioc_streamoff	 = vpbe_display_streamoff,
+	.vidioc_cropcap		 = vpbe_display_cropcap,
+	.vidioc_g_crop		 = vpbe_display_g_crop,
+	.vidioc_s_crop		 = vpbe_display_s_crop,
+	.vidioc_g_priority	 = vpbe_display_g_priority,
+	.vidioc_s_priority	 = vpbe_display_s_priority,
+	.vidioc_s_std		 = vpbe_display_s_std,
+	.vidioc_g_std		 = vpbe_display_g_std,
+	.vidioc_enum_output	 = vpbe_display_enum_output,
+	.vidioc_s_output	 = vpbe_display_s_output,
+	.vidioc_g_output	 = vpbe_display_g_output,
+	.vidioc_s_dv_preset	 = vpbe_display_s_dv_preset,
+	.vidioc_g_dv_preset	 = vpbe_display_g_dv_preset,
+	.vidioc_enum_dv_presets	 = vpbe_display_enum_dv_presets,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	 = vpbe_display_g_register,
+	.vidioc_s_register	 = vpbe_display_s_register,
+#endif
+};
+
+static struct v4l2_file_operations vpbe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpbe_display_open,
+	.release = vpbe_display_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vpbe_display_mmap,
+	.poll = vpbe_display_poll
+};
+
+static int vpbe_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_display *vpbe_disp  = data;
+
+	if (strcmp("vpbe_controller", pdev->name) == 0)
+		vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
+
+	if (strcmp("vpbe-osd", pdev->name) == 0)
+		vpbe_disp->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+static __devinit int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
+				     struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer = NULL;
+	struct video_device *vbd = NULL;
+
+	/* Allocate memory for four plane display objects */
+
+	disp_dev->dev[i] =
+		kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL);
+
+	/* If memory allocation fails, return error */
+	if (!disp_dev->dev[i]) {
+		printk(KERN_ERR "ran out of memory\n");
+		return  -ENOMEM;
+	}
+	spin_lock_init(&disp_dev->dev[i]->irqlock);
+	mutex_init(&disp_dev->dev[i]->opslock);
+
+	/* Get the pointer to the layer object */
+	vpbe_display_layer = disp_dev->dev[i];
+	vbd = &vpbe_display_layer->video_dev;
+	/* Initialize field of video device */
+	vbd->release	= video_device_release_empty;
+	vbd->fops	= &vpbe_fops;
+	vbd->ioctl_ops	= &vpbe_ioctl_ops;
+	vbd->minor	= -1;
+	vbd->v4l2_dev   = &disp_dev->vpbe_dev->v4l2_dev;
+	vbd->lock	= &vpbe_display_layer->opslock;
+
+	if (disp_dev->vpbe_dev->current_timings.timings_type &
+			VPBE_ENC_STD) {
+		vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
+		vbd->current_norm =
+			disp_dev->vpbe_dev->
+			current_timings.timings.std_id;
+	} else
+		vbd->current_norm = 0;
+
+	snprintf(vbd->name, sizeof(vbd->name),
+			"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
+			(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE) & 0xff);
+
+	vpbe_display_layer->device_id = i;
+
+	vpbe_display_layer->layer_info.id =
+		((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
+
+	/* Initialize prio member of layer object */
+	v4l2_prio_init(&vpbe_display_layer->prio);
+
+	return 0;
+}
+
+static __devinit int register_device(struct vpbe_layer *vpbe_display_layer,
+					struct vpbe_display *disp_dev,
+					struct platform_device *pdev) {
+	int err;
+
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "Trying to register VPBE display device.\n");
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "layer=%x,layer->video_dev=%x\n",
+		  (int)vpbe_display_layer,
+		  (int)&vpbe_display_layer->video_dev);
+
+	err = video_register_device(&vpbe_display_layer->video_dev,
+				    VFL_TYPE_GRABBER,
+				    -1);
+	if (err)
+		return -ENODEV;
+
+	vpbe_display_layer->disp_dev = disp_dev;
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, disp_dev);
+	video_set_drvdata(&vpbe_display_layer->video_dev,
+			  vpbe_display_layer);
+
+	return 0;
+}
+
+
+
+/*
+ * vpbe_display_probe()
+ * This function creates device entries by register itself to the V4L2 driver
+ * and initializes fields of each layer objects
+ */
+static __devinit int vpbe_display_probe(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev;
+	struct resource *res = NULL;
+	int k;
+	int i;
+	int err;
+	int irq;
+
+	printk(KERN_DEBUG "vpbe_display_probe\n");
+	/* Allocate memory for vpbe_display */
+	disp_dev = kzalloc(sizeof(struct vpbe_display), GFP_KERNEL);
+	if (!disp_dev) {
+		printk(KERN_ERR "ran out of memory\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&disp_dev->dma_queue_lock);
+	/*
+	 * Scan all the platform devices to find the vpbe
+	 * controller device and get the vpbe_dev object
+	 */
+	err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
+			vpbe_device_get);
+	if (err < 0)
+		return err;
+	/* Initialize the vpbe display controller */
+	if (NULL != disp_dev->vpbe_dev->ops.initialize) {
+		err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
+							 disp_dev->vpbe_dev);
+		if (err) {
+			v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+					"Error initing vpbe\n");
+			err = -ENOMEM;
+			goto probe_out;
+		}
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (init_vpbe_layer(i, disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+			 "Unable to get VENC interrupt resource\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	irq = res->start;
+	if (request_irq(irq, venc_isr,  IRQF_DISABLED, VPBE_DISPLAY_DRIVER,
+		disp_dev)) {
+		v4l2_err(&disp_dev->vpbe_dev->v4l2_dev,
+				"Unable to request interrupt\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	printk(KERN_DEBUG "Successfully completed the probing of vpbe v4l2 device\n");
+	return 0;
+
+probe_out:
+	free_irq(res->start, disp_dev);
+	for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[k];
+		/* Unregister video device */
+		if (vpbe_display_layer) {
+			video_unregister_device(
+				&vpbe_display_layer->video_dev);
+				kfree(disp_dev->dev[k]);
+		}
+	}
+	kfree(disp_dev);
+	return err;
+}
+
+/*
+ * vpbe_display_remove()
+ * It un-register hardware layer from V4L2 driver
+ */
+static int vpbe_display_remove(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct resource *res;
+	int i;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
+
+	/* unregister irq */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	free_irq(res->start, disp_dev);
+
+	/* deinitialize the vpbe display controller */
+	if (NULL != vpbe_dev->ops.deinitialize)
+		vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
+	/* un-register device */
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[i];
+		/* Unregister video device */
+		video_unregister_device(&vpbe_display_layer->video_dev);
+
+	}
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		kfree(disp_dev->dev[i]);
+		disp_dev->dev[i] = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver vpbe_display_driver = {
+	.driver = {
+		.name = VPBE_DISPLAY_DRIVER,
+		.owner = THIS_MODULE,
+		.bus = &platform_bus_type,
+	},
+	.probe = vpbe_display_probe,
+	.remove = __devexit_p(vpbe_display_remove),
+};
+
+/*
+ * vpbe_display_init()
+ * This function registers device and driver to the kernel, requests irq
+ * handler and allocates memory for layer objects
+ */
+static __devinit int vpbe_display_init(void)
+{
+	int err;
+
+	printk(KERN_DEBUG "vpbe_display_init\n");
+
+	/* Register driver to the kernel */
+	err = platform_driver_register(&vpbe_display_driver);
+	if (0 != err)
+		return err;
+
+	printk(KERN_DEBUG "vpbe_display_init:"
+			"VPBE V4L2 Display Driver V1.0 loaded\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_cleanup()
+ * This function un-registers device and driver to the kernel, frees requested
+ * irq handler and de-allocates memory allocated for layer objects.
+ */
+static void vpbe_display_cleanup(void)
+{
+	printk(KERN_DEBUG "vpbe_display_cleanup\n");
+
+	/* platform driver unregister */
+	platform_driver_unregister(&vpbe_display_driver);
+}
+
+/* Function for module initialization and cleanup */
+module_init(vpbe_display_init);
+module_exit(vpbe_display_cleanup);
+
+MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd.c b/drivers/media/video/davinci/vpbe_osd.c
new file mode 100644
index 00000000000..5352884998f
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_osd.c
@@ -0,0 +1,1231 @@
+/*
+ * Copyright (C) 2007-2010 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <mach/io.h>
+#include <mach/cputype.h>
+#include <mach/hardware.h>
+
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+
+#include <linux/io.h>
+#include "vpbe_osd_regs.h"
+
+#define MODULE_NAME	VPBE_OSD_SUBDEV_NAME
+
+/* register access routines */
+static inline u32 osd_read(struct osd_state *sd, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	return readl(osd->osd_base + offset);
+}
+
+static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	writel(val, osd->osd_base + offset);
+
+	return val;
+}
+
+static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 val = readl(addr) | mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 val = readl(addr) & ~mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
+				 u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	u32 addr = osd->osd_base + offset;
+	u32 new_val = (readl(addr) & ~mask) | (val & mask);
+
+	writel(new_val, addr);
+
+	return new_val;
+}
+
+/* define some macros for layer and pixfmt classification */
+#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1))
+#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1))
+#define is_rgb_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888))
+#define is_yc_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_YCbCrI) || ((pixfmt) == PIXFMT_YCrCbI) || \
+	((pixfmt) == PIXFMT_NV12))
+#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X
+#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5)
+
+/**
+ * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
+ * @sd - ptr to struct osd_state
+ * @field_inversion - inversion flag
+ * @fb_base_phys - frame buffer address
+ * @lconfig - ptr to layer config
+ *
+ * This routine implements a workaround for the field signal inversion silicon
+ * erratum described in Advisory 1.3.8 for the DM6446.  The fb_base_phys and
+ * lconfig parameters apply to the vid0 window.  This routine should be called
+ * whenever the vid0 layer configuration or start address is modified, or when
+ * the OSD field inversion setting is modified.
+ * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or
+ *          0 otherwise
+ */
+static int _osd_dm6446_vid0_pingpong(struct osd_state *sd,
+				     int field_inversion,
+				     unsigned long fb_base_phys,
+				     const struct osd_layer_config *lconfig)
+{
+	struct osd_platform_data *pdata;
+
+	pdata = (struct osd_platform_data *)sd->dev->platform_data;
+	if (pdata->field_inv_wa_enable) {
+
+		if (!field_inversion || !lconfig->interlaced) {
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR);
+			osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0,
+				   OSD_MISCCTL);
+			return 0;
+		} else {
+			unsigned miscctl = OSD_MISCCTL_PPRV;
+
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) - lconfig->line_length,
+				OSD_VIDWIN0ADR);
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) + lconfig->line_length,
+				OSD_PPVWIN0ADR);
+			osd_modify(sd,
+				OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl,
+				OSD_MISCCTL);
+
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void _osd_set_field_inversion(struct osd_state *sd, int enable)
+{
+	unsigned fsinv = 0;
+
+	if (enable)
+		fsinv = OSD_MODE_FSINV;
+
+	osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE);
+}
+
+static void _osd_set_blink_attribute(struct osd_state *sd, int enable,
+				     enum osd_blink_interval blink)
+{
+	u32 osdatrmd = 0;
+
+	if (enable) {
+		osdatrmd |= OSD_OSDATRMD_BLNK;
+		osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT;
+	}
+	/* caller must ensure that OSD1 is configured in attribute mode */
+	osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd,
+		  OSD_OSDATRMD);
+}
+
+static void _osd_set_rom_clut(struct osd_state *sd,
+			      enum osd_rom_clut rom_clut)
+{
+	if (rom_clut == ROM_CLUT0)
+		osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+	else
+		osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+}
+
+static void _osd_set_palette_map(struct osd_state *sd,
+				 enum osd_win_layer osdwin,
+				 unsigned char pixel_value,
+				 unsigned char clut_index,
+				 enum osd_pix_format pixfmt)
+{
+	static const int map_2bpp[] = { 0, 5, 10, 15 };
+	static const int map_1bpp[] = { 0, 15 };
+	int bmp_offset;
+	int bmp_shift;
+	int bmp_mask;
+	int bmp_reg;
+
+	switch (pixfmt) {
+	case PIXFMT_1BPP:
+		bmp_reg = map_1bpp[pixel_value & 0x1];
+		break;
+	case PIXFMT_2BPP:
+		bmp_reg = map_2bpp[pixel_value & 0x3];
+		break;
+	case PIXFMT_4BPP:
+		bmp_reg = pixel_value & 0xf;
+		break;
+	default:
+		return;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	case OSDWIN_OSD1:
+		bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	default:
+		return;
+	}
+
+	if (bmp_reg & 1) {
+		bmp_shift = 8;
+		bmp_mask = 0xff << 8;
+	} else {
+		bmp_shift = 0;
+		bmp_mask = 0xff;
+	}
+
+	osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset);
+}
+
+static void _osd_set_rec601_attenuation(struct osd_state *sd,
+					enum osd_win_layer osdwin, int enable)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
+			  enable ? OSD_OSDWIN0MD_ATN0E : 0,
+			  OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
+			  enable ? OSD_OSDWIN1MD_ATN1E : 0,
+			  OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_blending_factor(struct osd_state *sd,
+				     enum osd_win_layer osdwin,
+				     enum osd_blending_factor blend)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_BLND0,
+			  blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_BLND1,
+			  blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_enable_color_key(struct osd_state *sd,
+				  enum osd_win_layer osdwin,
+				  unsigned colorkey,
+				  enum osd_pix_format pixfmt)
+{
+	switch (pixfmt) {
+	case PIXFMT_RGB565:
+		osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS,
+			  OSD_TRANSPVAL);
+		break;
+	default:
+		break;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_disable_color_key(struct osd_state *sd,
+				   enum osd_win_layer osdwin)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_osd_clut(struct osd_state *sd,
+			      enum osd_win_layer osdwin,
+			      enum osd_clut clut)
+{
+	u32 winmd = 0;
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN0MD_CLUTS0;
+		osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN1MD_CLUTS1;
+		osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer,
+			  enum osd_zoom_factor h_zoom,
+			  enum osd_zoom_factor v_zoom)
+{
+	u32 winmd = 0;
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT);
+		osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd,
+			  OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd,
+			  OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT);
+		osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd,
+			  OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* disable attribute mode as well as disabling the window */
+		osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+	win->is_enabled = 0;
+
+	_osd_disable_layer(sd, layer);
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void _osd_enable_attribute_mode(struct osd_state *sd)
+{
+	/* enable attribute mode for OSD1 */
+	osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD);
+}
+
+static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* enable OSD1 and disable attribute mode */
+		osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	/*
+	 * use otherwin flag to know this is the other vid window
+	 * in YUV420 mode, if is, skip this check
+	 */
+	if (!otherwin && (!win->is_allocated ||
+			!win->fb_base_phys ||
+			!cfg->line_length ||
+			!cfg->xsize ||
+			!cfg->ysize)) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+
+	if (win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return 0;
+	}
+	win->is_enabled = 1;
+
+	if (cfg->pixfmt != PIXFMT_OSD_ATTR)
+		_osd_enable_layer(sd, layer);
+	else {
+		_osd_enable_attribute_mode(sd);
+		_osd_set_blink_attribute(sd, osd->is_blinking, osd->blink);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			     unsigned long fb_base_phys,
+			     unsigned long cbcr_ofst)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR);
+		break;
+	case WIN_VID0:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+		break;
+	case WIN_OSD1:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR);
+		break;
+	case WIN_VID1:
+		osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR);
+		break;
+	}
+}
+
+static void osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->fb_base_phys = fb_base_phys & ~0x1F;
+	_osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	*lconfig = win->lconfig;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+/**
+ * try_layer_config() - Try a specific configuration for the layer
+ * @sd  - ptr to struct osd_state
+ * @layer - layer to configure
+ * @lconfig - layer configuration to try
+ *
+ * If the requested lconfig is completely rejected and the value of lconfig on
+ * exit is the current lconfig, then try_layer_config() returns 1.  Otherwise,
+ * try_layer_config() returns 0.  A return value of 0 does not necessarily mean
+ * that the value of lconfig on exit is identical to the value of lconfig on
+ * entry, but merely that it represents a change from the current lconfig.
+ */
+static int try_layer_config(struct osd_state *sd, enum osd_layer layer,
+			    struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	int bad_config;
+
+	/* verify that the pixel format is compatible with the layer */
+	switch (lconfig->pixfmt) {
+	case PIXFMT_1BPP:
+	case PIXFMT_2BPP:
+	case PIXFMT_4BPP:
+	case PIXFMT_8BPP:
+	case PIXFMT_RGB565:
+		bad_config = !is_osd_win(layer);
+		break;
+	case PIXFMT_YCbCrI:
+	case PIXFMT_YCrCbI:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_RGB888:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_NV12:
+		bad_config = 1;
+		break;
+	case PIXFMT_OSD_ATTR:
+		bad_config = (layer != WIN_OSD1);
+		break;
+	default:
+		bad_config = 1;
+		break;
+	}
+	if (bad_config) {
+		/*
+		 * The requested pixel format is incompatible with the layer,
+		 * so keep the current layer configuration.
+		 */
+		*lconfig = win->lconfig;
+		return bad_config;
+	}
+
+	/* DM6446: */
+	/* only one OSD window at a time can use RGB pixel formats */
+	if (is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) {
+		enum osd_pix_format pixfmt;
+		if (layer == WIN_OSD0)
+			pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt;
+
+		if (is_rgb_pixfmt(pixfmt)) {
+			/*
+			 * The other OSD window is already configured for an
+			 * RGB, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* DM6446: only one video window at a time can use RGB888 */
+	if (is_vid_win(layer) && lconfig->pixfmt == PIXFMT_RGB888) {
+		enum osd_pix_format pixfmt;
+
+		if (layer == WIN_VID0)
+			pixfmt = osd->win[WIN_VID1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_VID0].lconfig.pixfmt;
+
+		if (pixfmt == PIXFMT_RGB888) {
+			/*
+			 * The other video window is already configured for
+			 * RGB888, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* window dimensions must be non-zero */
+	if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) {
+		*lconfig = win->lconfig;
+		return 1;
+	}
+
+	/* round line_length up to a multiple of 32 */
+	lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32;
+	lconfig->line_length =
+	    min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH);
+	lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE);
+	lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE);
+	lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE);
+	lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE);
+	lconfig->interlaced = (lconfig->interlaced != 0);
+	if (lconfig->interlaced) {
+		/* ysize and ypos must be even for interlaced displays */
+		lconfig->ysize &= ~1;
+		lconfig->ypos &= ~1;
+	}
+
+	return 0;
+}
+
+static void _osd_disable_vid_rgb888(struct osd_state *sd)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine disables RGB888 pixel format for both video windows.
+	 * The caller must ensure that neither video window is currently
+	 * configured for RGB888 pixel format.
+	 */
+	osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+}
+
+static void _osd_enable_vid_rgb888(struct osd_state *sd,
+				   enum osd_layer layer)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine enables RGB888 pixel format for the specified video
+	 * window.  The caller must ensure that the other video window is not
+	 * currently configured for RGB888 pixel format, as this routine will
+	 * disable RGB888 pixel format for the other window.
+	 */
+	if (layer == WIN_VID0) {
+		osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+	} else if (layer == WIN_VID1) {
+		osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+			  OSD_MISCCTL);
+	}
+}
+
+static void _osd_set_cbcr_order(struct osd_state *sd,
+				enum osd_pix_format pixfmt)
+{
+	/*
+	 * The caller must ensure that all windows using YC pixfmt use the same
+	 * Cb/Cr order.
+	 */
+	if (pixfmt == PIXFMT_YCbCrI)
+		osd_clear(sd, OSD_MODE_CS, OSD_MODE);
+	else if (pixfmt == PIXFMT_YCrCbI)
+		osd_set(sd, OSD_MODE_CS, OSD_MODE);
+}
+
+static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				  const struct osd_layer_config *lconfig)
+{
+	u32 winmd = 0, winmd_mask = 0, bmw = 0;
+
+	_osd_set_cbcr_order(sd, lconfig->pixfmt);
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd_mask |= OSD_OSDWIN0MD_RGB0E;
+		if (lconfig->pixfmt == PIXFMT_RGB565)
+			winmd |= OSD_OSDWIN0MD_RGB0E;
+
+		winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			bmw = 0;
+			break;
+		case PIXFMT_2BPP:
+			bmw = 1;
+			break;
+		case PIXFMT_4BPP:
+			bmw = 2;
+			break;
+		case PIXFMT_8BPP:
+			bmw = 3;
+			break;
+		default:
+			break;
+		}
+		winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT);
+
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN0MD_OFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL);
+		}
+		break;
+	case WIN_VID0:
+		winmd_mask |= OSD_VIDWINMD_VFF0;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
+		}
+		break;
+	case WIN_OSD1:
+		/*
+		 * The caller must ensure that OSD1 is disabled prior to
+		 * switching from a normal mode to attribute mode or from
+		 * attribute mode to a normal mode.
+		 */
+		if (lconfig->pixfmt == PIXFMT_OSD_ATTR) {
+			winmd_mask |=
+			    OSD_OSDWIN1MD_ATN1E | OSD_OSDWIN1MD_RGB1E |
+			    OSD_OSDWIN1MD_CLUTS1 |
+			    OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1;
+		} else {
+			winmd_mask |= OSD_OSDWIN1MD_RGB1E;
+			if (lconfig->pixfmt == PIXFMT_RGB565)
+				winmd |= OSD_OSDWIN1MD_RGB1E;
+
+			winmd_mask |= OSD_OSDWIN1MD_BMW1;
+			switch (lconfig->pixfmt) {
+			case PIXFMT_1BPP:
+				bmw = 0;
+				break;
+			case PIXFMT_2BPP:
+				bmw = 1;
+				break;
+			case PIXFMT_4BPP:
+				bmw = 2;
+				break;
+			case PIXFMT_8BPP:
+				bmw = 3;
+				break;
+			default:
+				break;
+			}
+			winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT);
+		}
+
+		winmd_mask |= OSD_OSDWIN1MD_OFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN1MD_OFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL);
+		}
+		break;
+	case WIN_VID1:
+		winmd_mask |= OSD_VIDWINMD_VFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D,
+			   OSD_MISCCTL);
+
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
+		}
+		break;
+	}
+}
+
+static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+	int reject_config;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	reject_config = try_layer_config(sd, layer, lconfig);
+	if (reject_config) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return reject_config;
+	}
+
+	/* update the current Cb/Cr order */
+	if (is_yc_pixfmt(lconfig->pixfmt))
+		osd->yc_pixfmt = lconfig->pixfmt;
+
+	/*
+	 * If we are switching OSD1 from normal mode to attribute mode or from
+	 * attribute mode to normal mode, then we must disable the window.
+	 */
+	if (layer == WIN_OSD1) {
+		if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) ||
+		  ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR))) {
+			win->is_enabled = 0;
+			_osd_disable_layer(sd, layer);
+		}
+	}
+
+	_osd_set_layer_config(sd, layer, lconfig);
+
+	if (layer == WIN_OSD1) {
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[OSDWIN_OSD1];
+
+		if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from attribute mode to normal
+			 * mode, so we must initialize the CLUT select, the
+			 * blend factor, transparency colorkey enable, and
+			 * attenuation enable (DM6446 only) bits in the
+			 * OSDWIN1MD register.
+			 */
+			_osd_set_osd_clut(sd, OSDWIN_OSD1,
+						   osdwin_state->clut);
+			_osd_set_blending_factor(sd, OSDWIN_OSD1,
+							  osdwin_state->blend);
+			if (osdwin_state->colorkey_blending) {
+				_osd_enable_color_key(sd, OSDWIN_OSD1,
+							       osdwin_state->
+							       colorkey,
+							       lconfig->pixfmt);
+			} else
+				_osd_disable_color_key(sd, OSDWIN_OSD1);
+			_osd_set_rec601_attenuation(sd, OSDWIN_OSD1,
+						    osdwin_state->
+						    rec601_attenuation);
+		} else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from normal mode to attribute
+			 * mode, so we must initialize the blink enable and
+			 * blink interval bits in the OSDATRMD register.
+			 */
+			_osd_set_blink_attribute(sd, osd->is_blinking,
+							  osd->blink);
+		}
+	}
+
+	/*
+	 * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format
+	 * then configure a default palette map.
+	 */
+	if ((lconfig->pixfmt != cfg->pixfmt) &&
+	  ((lconfig->pixfmt == PIXFMT_1BPP) ||
+	  (lconfig->pixfmt == PIXFMT_2BPP) ||
+	  (lconfig->pixfmt == PIXFMT_4BPP))) {
+		enum osd_win_layer osdwin =
+		    ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1);
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[osdwin];
+		unsigned char clut_index;
+		unsigned char clut_entries = 0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			clut_entries = 2;
+			break;
+		case PIXFMT_2BPP:
+			clut_entries = 4;
+			break;
+		case PIXFMT_4BPP:
+			clut_entries = 16;
+			break;
+		default:
+			break;
+		}
+		/*
+		 * The default palette map maps the pixel value to the clut
+		 * index, i.e. pixel value 0 maps to clut entry 0, pixel value
+		 * 1 maps to clut entry 1, etc.
+		 */
+		for (clut_index = 0; clut_index < 16; clut_index++) {
+			osdwin_state->palette_map[clut_index] = clut_index;
+			if (clut_index < clut_entries) {
+				_osd_set_palette_map(sd, osdwin, clut_index,
+						     clut_index,
+						     lconfig->pixfmt);
+			}
+		}
+	}
+
+	*cfg = *lconfig;
+	/* DM6446: configure the RGB888 enable and window selection */
+	if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID0);
+	else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID1);
+	else
+		_osd_disable_vid_rgb888(sd);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void osd_init_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	enum osd_win_layer osdwin;
+	struct osd_osdwin_state *osdwin_state;
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_enabled = 0;
+	_osd_disable_layer(sd, layer);
+
+	win->h_zoom = ZOOM_X1;
+	win->v_zoom = ZOOM_X1;
+	_osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom);
+
+	win->fb_base_phys = 0;
+	_osd_start_layer(sd, layer, win->fb_base_phys, 0);
+
+	cfg->line_length = 0;
+	cfg->xsize = 0;
+	cfg->ysize = 0;
+	cfg->xpos = 0;
+	cfg->ypos = 0;
+	cfg->interlaced = 0;
+	switch (layer) {
+	case WIN_OSD0:
+	case WIN_OSD1:
+		osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1;
+		osdwin_state = &osd->osdwin[osdwin];
+		/*
+		 * Other code relies on the fact that OSD windows default to a
+		 * bitmap pixel format when they are deallocated, so don't
+		 * change this default pixel format.
+		 */
+		cfg->pixfmt = PIXFMT_8BPP;
+		_osd_set_layer_config(sd, layer, cfg);
+		osdwin_state->clut = RAM_CLUT;
+		_osd_set_osd_clut(sd, osdwin, osdwin_state->clut);
+		osdwin_state->colorkey_blending = 0;
+		_osd_disable_color_key(sd, osdwin);
+		osdwin_state->blend = OSD_8_VID_0;
+		_osd_set_blending_factor(sd, osdwin, osdwin_state->blend);
+		osdwin_state->rec601_attenuation = 0;
+		_osd_set_rec601_attenuation(sd, osdwin,
+						     osdwin_state->
+						     rec601_attenuation);
+		if (osdwin == OSDWIN_OSD1) {
+			osd->is_blinking = 0;
+			osd->blink = BLINK_X1;
+		}
+		break;
+	case WIN_VID0:
+	case WIN_VID1:
+		cfg->pixfmt = osd->yc_pixfmt;
+		_osd_set_layer_config(sd, layer, cfg);
+		break;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_release_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+	osd_init_layer(sd, layer);
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_allocated = 0;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static int osd_request_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+	win->is_allocated = 1;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_init(struct osd_state *sd)
+{
+	osd_write(sd, 0, OSD_MODE);
+	osd_write(sd, 0, OSD_VIDWINMD);
+	osd_write(sd, 0, OSD_OSDWIN0MD);
+	osd_write(sd, 0, OSD_OSDWIN1MD);
+	osd_write(sd, 0, OSD_RECTCUR);
+	osd_write(sd, 0, OSD_MISCCTL);
+}
+
+static void osd_set_left_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPX);
+}
+
+static void osd_set_top_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPY);
+}
+
+static int osd_initialize(struct osd_state *osd)
+{
+	if (osd == NULL)
+		return -ENODEV;
+	_osd_init(osd);
+
+	/* set default Cb/Cr order */
+	osd->yc_pixfmt = PIXFMT_YCbCrI;
+
+	_osd_set_field_inversion(osd, osd->field_inversion);
+	_osd_set_rom_clut(osd, osd->rom_clut);
+
+	osd_init_layer(osd, WIN_OSD0);
+	osd_init_layer(osd, WIN_VID0);
+	osd_init_layer(osd, WIN_OSD1);
+	osd_init_layer(osd, WIN_VID1);
+
+	return 0;
+}
+
+static const struct vpbe_osd_ops osd_ops = {
+	.initialize = osd_initialize,
+	.request_layer = osd_request_layer,
+	.release_layer = osd_release_layer,
+	.enable_layer = osd_enable_layer,
+	.disable_layer = osd_disable_layer,
+	.set_layer_config = osd_set_layer_config,
+	.get_layer_config = osd_get_layer_config,
+	.start_layer = osd_start_layer,
+	.set_left_margin = osd_set_left_margin,
+	.set_top_margin = osd_set_top_margin,
+};
+
+static int osd_probe(struct platform_device *pdev)
+{
+	struct osd_platform_data *pdata;
+	struct osd_state *osd;
+	struct resource *res;
+	int ret = 0;
+
+	osd = kzalloc(sizeof(struct osd_state), GFP_KERNEL);
+	if (osd == NULL)
+		return -ENOMEM;
+
+	osd->dev = &pdev->dev;
+	pdata = (struct osd_platform_data *)pdev->dev.platform_data;
+	osd->vpbe_type = (enum vpbe_version)pdata->vpbe_type;
+	if (NULL == pdev->dev.platform_data) {
+		dev_err(osd->dev, "No platform data defined for OSD"
+			" sub device\n");
+		ret = -ENOENT;
+		goto free_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(osd->dev, "Unable to get OSD register address map\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+	osd->osd_base_phys = res->start;
+	osd->osd_size = res->end - res->start + 1;
+	if (!request_mem_region(osd->osd_base_phys, osd->osd_size,
+				MODULE_NAME)) {
+		dev_err(osd->dev, "Unable to reserve OSD MMIO region\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+	osd->osd_base = (unsigned long)ioremap_nocache(res->start,
+							osd->osd_size);
+	if (!osd->osd_base) {
+		dev_err(osd->dev, "Unable to map the OSD region\n");
+		ret = -ENODEV;
+		goto release_mem_region;
+	}
+	spin_lock_init(&osd->lock);
+	osd->ops = osd_ops;
+	platform_set_drvdata(pdev, osd);
+	dev_notice(osd->dev, "OSD sub device probe success\n");
+	return ret;
+
+release_mem_region:
+	release_mem_region(osd->osd_base_phys, osd->osd_size);
+free_mem:
+	kfree(osd);
+	return ret;
+}
+
+static int osd_remove(struct platform_device *pdev)
+{
+	struct osd_state *osd = platform_get_drvdata(pdev);
+
+	iounmap((void *)osd->osd_base);
+	release_mem_region(osd->osd_base_phys, osd->osd_size);
+	kfree(osd);
+	return 0;
+}
+
+static struct platform_driver osd_driver = {
+	.probe		= osd_probe,
+	.remove		= osd_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int osd_init(void)
+{
+	if (platform_driver_register(&osd_driver)) {
+		printk(KERN_ERR "Unable to register davinci osd driver\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void osd_exit(void)
+{
+	platform_driver_unregister(&osd_driver);
+}
+
+module_init(osd_init);
+module_exit(osd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DaVinci OSD Manager Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_osd_regs.h b/drivers/media/video/davinci/vpbe_osd_regs.h
new file mode 100644
index 00000000000..584520f3af6
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_osd_regs.h
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_OSD_REGS_H
+#define _VPBE_OSD_REGS_H
+
+/* VPBE Global Registers */
+#define VPBE_PID				0x0
+#define VPBE_PCR				0x4
+
+/* VPSS CLock Registers */
+#define VPSSCLK_PID				0x00
+#define VPSSCLK_CLKCTRL				0x04
+
+/* VPSS Buffer Logic Registers */
+#define VPSSBL_PID				0x00
+#define VPSSBL_PCR				0x04
+#define VPSSBL_BCR				0x08
+#define VPSSBL_INTSTAT				0x0C
+#define VPSSBL_INTSEL				0x10
+#define VPSSBL_EVTSEL				0x14
+#define VPSSBL_MEMCTRL				0x18
+#define VPSSBL_CCDCMUX				0x1C
+
+/* DM365 ISP5 system configuration */
+#define ISP5_PID				0x0
+#define ISP5_PCCR				0x4
+#define ISP5_BCR				0x8
+#define ISP5_INTSTAT				0xC
+#define ISP5_INTSEL1				0x10
+#define ISP5_INTSEL2				0x14
+#define ISP5_INTSEL3				0x18
+#define ISP5_EVTSEL				0x1c
+#define ISP5_CCDCMUX				0x20
+
+/* VPBE On-Screen Display Subsystem Registers (OSD) */
+#define OSD_MODE				0x00
+#define OSD_VIDWINMD				0x04
+#define OSD_OSDWIN0MD				0x08
+#define OSD_OSDWIN1MD				0x0C
+#define OSD_OSDATRMD				0x0C
+#define OSD_RECTCUR				0x10
+#define OSD_VIDWIN0OFST				0x18
+#define OSD_VIDWIN1OFST				0x1C
+#define OSD_OSDWIN0OFST				0x20
+#define OSD_OSDWIN1OFST				0x24
+#define OSD_VIDWINADH				0x28
+#define OSD_VIDWIN0ADL				0x2C
+#define OSD_VIDWIN0ADR				0x2C
+#define OSD_VIDWIN1ADL				0x30
+#define OSD_VIDWIN1ADR				0x30
+#define OSD_OSDWINADH				0x34
+#define OSD_OSDWIN0ADL				0x38
+#define OSD_OSDWIN0ADR				0x38
+#define OSD_OSDWIN1ADL				0x3C
+#define OSD_OSDWIN1ADR				0x3C
+#define OSD_BASEPX				0x40
+#define OSD_BASEPY				0x44
+#define OSD_VIDWIN0XP				0x48
+#define OSD_VIDWIN0YP				0x4C
+#define OSD_VIDWIN0XL				0x50
+#define OSD_VIDWIN0YL				0x54
+#define OSD_VIDWIN1XP				0x58
+#define OSD_VIDWIN1YP				0x5C
+#define OSD_VIDWIN1XL				0x60
+#define OSD_VIDWIN1YL				0x64
+#define OSD_OSDWIN0XP				0x68
+#define OSD_OSDWIN0YP				0x6C
+#define OSD_OSDWIN0XL				0x70
+#define OSD_OSDWIN0YL				0x74
+#define OSD_OSDWIN1XP				0x78
+#define OSD_OSDWIN1YP				0x7C
+#define OSD_OSDWIN1XL				0x80
+#define OSD_OSDWIN1YL				0x84
+#define OSD_CURXP				0x88
+#define OSD_CURYP				0x8C
+#define OSD_CURXL				0x90
+#define OSD_CURYL				0x94
+#define OSD_W0BMP01				0xA0
+#define OSD_W0BMP23				0xA4
+#define OSD_W0BMP45				0xA8
+#define OSD_W0BMP67				0xAC
+#define OSD_W0BMP89				0xB0
+#define OSD_W0BMPAB				0xB4
+#define OSD_W0BMPCD				0xB8
+#define OSD_W0BMPEF				0xBC
+#define OSD_W1BMP01				0xC0
+#define OSD_W1BMP23				0xC4
+#define OSD_W1BMP45				0xC8
+#define OSD_W1BMP67				0xCC
+#define OSD_W1BMP89				0xD0
+#define OSD_W1BMPAB				0xD4
+#define OSD_W1BMPCD				0xD8
+#define OSD_W1BMPEF				0xDC
+#define OSD_VBNDRY				0xE0
+#define OSD_EXTMODE				0xE4
+#define OSD_MISCCTL				0xE8
+#define OSD_CLUTRAMYCB				0xEC
+#define OSD_CLUTRAMCR				0xF0
+#define OSD_TRANSPVAL				0xF4
+#define OSD_TRANSPVALL				0xF4
+#define OSD_TRANSPVALU				0xF8
+#define OSD_TRANSPBMPIDX			0xFC
+#define OSD_PPVWIN0ADR				0xFC
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VPSSBL_INTSTAT_HSSIINT			(1 << 14)
+#define VPSSBL_INTSTAT_CFALDINT			(1 << 13)
+#define VPSSBL_INTSTAT_IPIPE_INT5		(1 << 12)
+#define VPSSBL_INTSTAT_IPIPE_INT4		(1 << 11)
+#define VPSSBL_INTSTAT_IPIPE_INT3		(1 << 10)
+#define VPSSBL_INTSTAT_IPIPE_INT2		(1 << 9)
+#define VPSSBL_INTSTAT_IPIPE_INT1		(1 << 8)
+#define VPSSBL_INTSTAT_IPIPE_INT0		(1 << 7)
+#define VPSSBL_INTSTAT_IPIPEIFINT		(1 << 6)
+#define VPSSBL_INTSTAT_OSDINT			(1 << 5)
+#define VPSSBL_INTSTAT_VENCINT			(1 << 4)
+#define VPSSBL_INTSTAT_H3AINT			(1 << 3)
+#define VPSSBL_INTSTAT_CCDC_VDINT2		(1 << 2)
+#define VPSSBL_INTSTAT_CCDC_VDINT1		(1 << 1)
+#define VPSSBL_INTSTAT_CCDC_VDINT0		(1 << 0)
+
+/* DM365 ISP5 bit definitions */
+#define ISP5_INTSTAT_VENCINT			(1 << 21)
+#define ISP5_INTSTAT_OSDINT			(1 << 20)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define OSD_MODE_CS				(1 << 15)
+#define OSD_MODE_OVRSZ				(1 << 14)
+#define OSD_MODE_OHRSZ				(1 << 13)
+#define OSD_MODE_EF				(1 << 12)
+#define OSD_MODE_VVRSZ				(1 << 11)
+#define OSD_MODE_VHRSZ				(1 << 10)
+#define OSD_MODE_FSINV				(1 << 9)
+#define OSD_MODE_BCLUT				(1 << 8)
+#define OSD_MODE_CABG_SHIFT			0
+#define OSD_MODE_CABG				(0xff << 0)
+
+#define OSD_VIDWINMD_VFINV			(1 << 15)
+#define OSD_VIDWINMD_V1EFC			(1 << 14)
+#define OSD_VIDWINMD_VHZ1_SHIFT			12
+#define OSD_VIDWINMD_VHZ1			(3 << 12)
+#define OSD_VIDWINMD_VVZ1_SHIFT			10
+#define OSD_VIDWINMD_VVZ1			(3 << 10)
+#define OSD_VIDWINMD_VFF1			(1 << 9)
+#define OSD_VIDWINMD_ACT1			(1 << 8)
+#define OSD_VIDWINMD_V0EFC			(1 << 6)
+#define OSD_VIDWINMD_VHZ0_SHIFT			4
+#define OSD_VIDWINMD_VHZ0			(3 << 4)
+#define OSD_VIDWINMD_VVZ0_SHIFT			2
+#define OSD_VIDWINMD_VVZ0			(3 << 2)
+#define OSD_VIDWINMD_VFF0			(1 << 1)
+#define OSD_VIDWINMD_ACT0			(1 << 0)
+
+#define OSD_OSDWIN0MD_ATN0E			(1 << 14)
+#define OSD_OSDWIN0MD_RGB0E			(1 << 13)
+#define OSD_OSDWIN0MD_BMP0MD_SHIFT		13
+#define OSD_OSDWIN0MD_BMP0MD			(3 << 13)
+#define OSD_OSDWIN0MD_CLUTS0			(1 << 12)
+#define OSD_OSDWIN0MD_OHZ0_SHIFT		10
+#define OSD_OSDWIN0MD_OHZ0			(3 << 10)
+#define OSD_OSDWIN0MD_OVZ0_SHIFT		8
+#define OSD_OSDWIN0MD_OVZ0			(3 << 8)
+#define OSD_OSDWIN0MD_BMW0_SHIFT		6
+#define OSD_OSDWIN0MD_BMW0			(3 << 6)
+#define OSD_OSDWIN0MD_BLND0_SHIFT		3
+#define OSD_OSDWIN0MD_BLND0			(7 << 3)
+#define OSD_OSDWIN0MD_TE0			(1 << 2)
+#define OSD_OSDWIN0MD_OFF0			(1 << 1)
+#define OSD_OSDWIN0MD_OACT0			(1 << 0)
+
+#define OSD_OSDWIN1MD_OASW			(1 << 15)
+#define OSD_OSDWIN1MD_ATN1E			(1 << 14)
+#define OSD_OSDWIN1MD_RGB1E			(1 << 13)
+#define OSD_OSDWIN1MD_BMP1MD_SHIFT		13
+#define OSD_OSDWIN1MD_BMP1MD			(3 << 13)
+#define OSD_OSDWIN1MD_CLUTS1			(1 << 12)
+#define OSD_OSDWIN1MD_OHZ1_SHIFT		10
+#define OSD_OSDWIN1MD_OHZ1			(3 << 10)
+#define OSD_OSDWIN1MD_OVZ1_SHIFT		8
+#define OSD_OSDWIN1MD_OVZ1			(3 << 8)
+#define OSD_OSDWIN1MD_BMW1_SHIFT		6
+#define OSD_OSDWIN1MD_BMW1			(3 << 6)
+#define OSD_OSDWIN1MD_BLND1_SHIFT		3
+#define OSD_OSDWIN1MD_BLND1			(7 << 3)
+#define OSD_OSDWIN1MD_TE1			(1 << 2)
+#define OSD_OSDWIN1MD_OFF1			(1 << 1)
+#define OSD_OSDWIN1MD_OACT1			(1 << 0)
+
+#define OSD_OSDATRMD_OASW			(1 << 15)
+#define OSD_OSDATRMD_OHZA_SHIFT			10
+#define OSD_OSDATRMD_OHZA			(3 << 10)
+#define OSD_OSDATRMD_OVZA_SHIFT			8
+#define OSD_OSDATRMD_OVZA			(3 << 8)
+#define OSD_OSDATRMD_BLNKINT_SHIFT		6
+#define OSD_OSDATRMD_BLNKINT			(3 << 6)
+#define OSD_OSDATRMD_OFFA			(1 << 1)
+#define OSD_OSDATRMD_BLNK			(1 << 0)
+
+#define OSD_RECTCUR_RCAD_SHIFT			8
+#define OSD_RECTCUR_RCAD			(0xff << 8)
+#define OSD_RECTCUR_CLUTSR			(1 << 7)
+#define OSD_RECTCUR_RCHW_SHIFT			4
+#define OSD_RECTCUR_RCHW			(7 << 4)
+#define OSD_RECTCUR_RCVW_SHIFT			1
+#define OSD_RECTCUR_RCVW			(7 << 1)
+#define OSD_RECTCUR_RCACT			(1 << 0)
+
+#define OSD_VIDWIN0OFST_V0LO			(0x1ff << 0)
+
+#define OSD_VIDWIN1OFST_V1LO			(0x1ff << 0)
+
+#define OSD_OSDWIN0OFST_O0LO			(0x1ff << 0)
+
+#define OSD_OSDWIN1OFST_O1LO			(0x1ff << 0)
+
+#define OSD_WINOFST_AH_SHIFT			9
+
+#define OSD_VIDWIN0OFST_V0AH			(0xf << 9)
+#define OSD_VIDWIN1OFST_V1AH			(0xf << 9)
+#define OSD_OSDWIN0OFST_O0AH			(0xf << 9)
+#define OSD_OSDWIN1OFST_O1AH			(0xf << 9)
+
+#define OSD_VIDWINADH_V1AH_SHIFT		8
+#define OSD_VIDWINADH_V1AH			(0x7f << 8)
+#define OSD_VIDWINADH_V0AH_SHIFT		0
+#define OSD_VIDWINADH_V0AH			(0x7f << 0)
+
+#define OSD_VIDWIN0ADL_V0AL			(0xffff << 0)
+
+#define OSD_VIDWIN1ADL_V1AL			(0xffff << 0)
+
+#define OSD_OSDWINADH_O1AH_SHIFT		8
+#define OSD_OSDWINADH_O1AH			(0x7f << 8)
+#define OSD_OSDWINADH_O0AH_SHIFT		0
+#define OSD_OSDWINADH_O0AH			(0x7f << 0)
+
+#define OSD_OSDWIN0ADL_O0AL			(0xffff << 0)
+
+#define OSD_OSDWIN1ADL_O1AL			(0xffff << 0)
+
+#define OSD_BASEPX_BPX				(0x3ff << 0)
+
+#define OSD_BASEPY_BPY				(0x1ff << 0)
+
+#define OSD_VIDWIN0XP_V0X			(0x7ff << 0)
+
+#define OSD_VIDWIN0YP_V0Y			(0x7ff << 0)
+
+#define OSD_VIDWIN0XL_V0W			(0x7ff << 0)
+
+#define OSD_VIDWIN0YL_V0H			(0x7ff << 0)
+
+#define OSD_VIDWIN1XP_V1X			(0x7ff << 0)
+
+#define OSD_VIDWIN1YP_V1Y			(0x7ff << 0)
+
+#define OSD_VIDWIN1XL_V1W			(0x7ff << 0)
+
+#define OSD_VIDWIN1YL_V1H			(0x7ff << 0)
+
+#define OSD_OSDWIN0XP_W0X			(0x7ff << 0)
+
+#define OSD_OSDWIN0YP_W0Y			(0x7ff << 0)
+
+#define OSD_OSDWIN0XL_W0W			(0x7ff << 0)
+
+#define OSD_OSDWIN0YL_W0H			(0x7ff << 0)
+
+#define OSD_OSDWIN1XP_W1X			(0x7ff << 0)
+
+#define OSD_OSDWIN1YP_W1Y			(0x7ff << 0)
+
+#define OSD_OSDWIN1XL_W1W			(0x7ff << 0)
+
+#define OSD_OSDWIN1YL_W1H			(0x7ff << 0)
+
+#define OSD_CURXP_RCSX				(0x7ff << 0)
+
+#define OSD_CURYP_RCSY				(0x7ff << 0)
+
+#define OSD_CURXL_RCSW				(0x7ff << 0)
+
+#define OSD_CURYL_RCSH				(0x7ff << 0)
+
+#define OSD_EXTMODE_EXPMDSEL			(1 << 15)
+#define OSD_EXTMODE_SCRNHEXP_SHIFT		13
+#define OSD_EXTMODE_SCRNHEXP			(3 << 13)
+#define OSD_EXTMODE_SCRNVEXP			(1 << 12)
+#define OSD_EXTMODE_OSD1BLDCHR			(1 << 11)
+#define OSD_EXTMODE_OSD0BLDCHR			(1 << 10)
+#define OSD_EXTMODE_ATNOSD1EN			(1 << 9)
+#define OSD_EXTMODE_ATNOSD0EN			(1 << 8)
+#define OSD_EXTMODE_OSDHRSZ15			(1 << 7)
+#define OSD_EXTMODE_VIDHRSZ15			(1 << 6)
+#define OSD_EXTMODE_ZMFILV1HEN			(1 << 5)
+#define OSD_EXTMODE_ZMFILV1VEN			(1 << 4)
+#define OSD_EXTMODE_ZMFILV0HEN			(1 << 3)
+#define OSD_EXTMODE_ZMFILV0VEN			(1 << 2)
+#define OSD_EXTMODE_EXPFILHEN			(1 << 1)
+#define OSD_EXTMODE_EXPFILVEN			(1 << 0)
+
+#define OSD_MISCCTL_BLDSEL			(1 << 15)
+#define OSD_MISCCTL_S420D			(1 << 14)
+#define OSD_MISCCTL_BMAPT			(1 << 13)
+#define OSD_MISCCTL_DM365M			(1 << 12)
+#define OSD_MISCCTL_RGBEN			(1 << 7)
+#define OSD_MISCCTL_RGBWIN			(1 << 6)
+#define OSD_MISCCTL_DMANG			(1 << 6)
+#define OSD_MISCCTL_TMON			(1 << 5)
+#define OSD_MISCCTL_RSEL			(1 << 4)
+#define OSD_MISCCTL_CPBSY			(1 << 3)
+#define OSD_MISCCTL_PPSW			(1 << 2)
+#define OSD_MISCCTL_PPRV			(1 << 1)
+
+#define OSD_CLUTRAMYCB_Y_SHIFT			8
+#define OSD_CLUTRAMYCB_Y			(0xff << 8)
+#define OSD_CLUTRAMYCB_CB_SHIFT			0
+#define OSD_CLUTRAMYCB_CB			(0xff << 0)
+
+#define OSD_CLUTRAMCR_CR_SHIFT			8
+#define OSD_CLUTRAMCR_CR			(0xff << 8)
+#define OSD_CLUTRAMCR_CADDR_SHIFT		0
+#define OSD_CLUTRAMCR_CADDR			(0xff << 0)
+
+#define OSD_TRANSPVAL_RGBTRANS			(0xffff << 0)
+
+#define OSD_TRANSPVALL_RGBL			(0xffff << 0)
+
+#define OSD_TRANSPVALU_Y_SHIFT			8
+#define OSD_TRANSPVALU_Y			(0xff << 8)
+#define OSD_TRANSPVALU_RGBU_SHIFT		0
+#define OSD_TRANSPVALU_RGBU			(0xff << 0)
+
+#define OSD_TRANSPBMPIDX_BMP1_SHIFT		8
+#define OSD_TRANSPBMPIDX_BMP1			(0xff << 8)
+#define OSD_TRANSPBMPIDX_BMP0_SHIFT		0
+#define OSD_TRANSPBMPIDX_BMP0			0xff
+
+#endif				/* _DAVINCI_VPBE_H_ */
diff --git a/drivers/media/video/davinci/vpbe_venc.c b/drivers/media/video/davinci/vpbe_venc.c
new file mode 100644
index 00000000000..03a3e5c65ee
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_venc.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/mux.h>
+#include <mach/io.h>
+#include <mach/i2c.h>
+
+#include <linux/io.h>
+
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+
+#include "vpbe_venc_regs.h"
+
+#define MODULE_NAME	VPBE_VENC_SUBDEV_NAME
+
+static int debug = 2;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-2");
+
+struct venc_state {
+	struct v4l2_subdev sd;
+	struct venc_callback *callback;
+	struct venc_platform_data *pdata;
+	struct device *pdev;
+	u32 output;
+	v4l2_std_id std;
+	spinlock_t lock;
+	void __iomem *venc_base;
+	void __iomem *vdaccfg_reg;
+};
+
+static inline struct venc_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct venc_state, sd);
+}
+
+static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset)
+{
+	struct venc_state *venc = to_state(sd);
+
+	return readl(venc->venc_base + offset);
+}
+
+static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, (venc->venc_base + offset));
+
+	return val;
+}
+
+static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset,
+				 u32 val, u32 mask)
+{
+	u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask);
+
+	venc_write(sd, offset, new_val);
+
+	return new_val;
+}
+
+static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, venc->vdaccfg_reg);
+
+	val = readl(venc->vdaccfg_reg);
+
+	return val;
+}
+
+/* This function sets the dac of the VPBE for various outputs
+ */
+static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index)
+{
+	switch (out_index) {
+	case 0:
+		v4l2_dbg(debug, 1, sd, "Setting output to Composite\n");
+		venc_write(sd, VENC_DACSEL, 0);
+		break;
+	case 1:
+		v4l2_dbg(debug, 1, sd, "Setting output to S-Video\n");
+		venc_write(sd, VENC_DACSEL, 0x210);
+		break;
+	case  2:
+		venc_write(sd, VENC_DACSEL, 0x543);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable)
+{
+	v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n");
+
+	if (benable) {
+		venc_write(sd, VENC_VMOD, 0);
+		venc_write(sd, VENC_CVBS, 0);
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_DACSEL, 0);
+
+	} else {
+		venc_write(sd, VENC_VMOD, 0);
+		/* disable VCLK output pin enable */
+		venc_write(sd, VENC_VIDCTL, 0x141);
+
+		/* Disable output sync pins */
+		venc_write(sd, VENC_SYNCCTL, 0);
+
+		/* Disable DCLOCK */
+		venc_write(sd, VENC_DCLKCTL, 0);
+		venc_write(sd, VENC_DRGBX1, 0x0000057C);
+
+		/* Disable LCD output control (accepting default polarity) */
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_CMPNT, 0x100);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+
+		venc_write(sd, VENC_HSDLY, 0);
+		venc_write(sd, VENC_VSDLY, 0);
+
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_VSTARTA, 0);
+
+		/* Set OSD clock and OSD Sync Adavance registers */
+		venc_write(sd, VENC_OSDCLK0, 1);
+		venc_write(sd, VENC_OSDCLK1, 2);
+	}
+}
+
+/*
+ * setting NTSC mode
+ */
+static int venc_set_ntsc(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+	venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+	/* Set REC656 Mode */
+	venc_write(sd, VENC_YCCCTL, 0x1);
+	venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS);
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * setting PAL mode
+ */
+static int venc_set_pal(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+
+	v4l2_dbg(debug, 2, sd, "venc_set_pal\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+	venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+	/* Set REC656 Mode */
+	venc_write(sd, VENC_YCCCTL, 0x1);
+
+	venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT,
+			VENC_SYNCCTL_OVD);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD,
+			(0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_480p59_94
+ *
+ * This function configures the video encoder to EDTV(525p) component setting.
+ */
+static int venc_set_480p59_94(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_480P59_94) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+		    VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+		    VENC_VDPRO_DAUPS);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_625p
+ *
+ * This function configures the video encoder to HDTV(625p) component setting
+ */
+static int venc_set_576p50(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_PRESET, V4L2_DV_576P50) < 0)
+		return -EINVAL;
+
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+		    VENC_VDPRO_DAFRQ);
+	venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+		    VENC_VDPRO_DAUPS);
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_std_output\n");
+
+	if (norm & V4L2_STD_525_60)
+		return venc_set_ntsc(sd);
+	else if (norm & V4L2_STD_625_50)
+		return venc_set_pal(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_dv_preset(struct v4l2_subdev *sd,
+			    struct v4l2_dv_preset *dv_preset)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_dv_preset\n");
+
+	if (dv_preset->preset == V4L2_DV_576P50)
+		return venc_set_576p50(sd);
+	else if (dv_preset->preset == V4L2_DV_480P59_94)
+		return venc_set_480p59_94(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+			  u32 config)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	v4l2_dbg(debug, 1, sd, "venc_s_routing\n");
+
+	ret = venc_set_dac(sd, output);
+	if (!ret)
+		venc->output = output;
+
+	return ret;
+}
+
+static long venc_ioctl(struct v4l2_subdev *sd,
+			unsigned int cmd,
+			void *arg)
+{
+	u32 val;
+
+	switch (cmd) {
+	case VENC_GET_FLD:
+		val = venc_read(sd, VENC_VSTAT);
+		*((int *)arg) = ((val & VENC_VSTAT_FIDST) ==
+		VENC_VSTAT_FIDST);
+		break;
+	default:
+		v4l2_err(sd, "Wrong IOCTL cmd\n");
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops venc_core_ops = {
+	.ioctl      = venc_ioctl,
+};
+
+static const struct v4l2_subdev_video_ops venc_video_ops = {
+	.s_routing = venc_s_routing,
+	.s_std_output = venc_s_std_output,
+	.s_dv_preset = venc_s_dv_preset,
+};
+
+static const struct v4l2_subdev_ops venc_ops = {
+	.core = &venc_core_ops,
+	.video = &venc_video_ops,
+};
+
+static int venc_initialize(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	/* Set default to output to composite and std to NTSC */
+	venc->output = 0;
+	venc->std = V4L2_STD_525_60;
+
+	ret = venc_s_routing(sd, 0, venc->output, 0);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting output during init\n");
+		return -EINVAL;
+	}
+
+	ret = venc_s_std_output(sd, venc->std);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting std during init\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int venc_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct venc_state **venc = data;
+
+	if (strcmp(MODULE_NAME, pdev->name) == 0)
+		*venc = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name)
+{
+	struct venc_state *venc;
+	int err;
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, &venc,
+			venc_device_get);
+	if (venc == NULL)
+		return NULL;
+
+	v4l2_subdev_init(&venc->sd, &venc_ops);
+
+	strcpy(venc->sd.name, venc_name);
+	if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) {
+		v4l2_err(v4l2_dev,
+			"vpbe unable to register venc sub device\n");
+		return NULL;
+	}
+	if (venc_initialize(&venc->sd)) {
+		v4l2_err(v4l2_dev,
+			"vpbe venc initialization failed\n");
+		return NULL;
+	}
+
+	return &venc->sd;
+}
+EXPORT_SYMBOL(venc_sub_dev_init);
+
+static int venc_probe(struct platform_device *pdev)
+{
+	struct venc_state *venc;
+	struct resource *res;
+	int ret;
+
+	venc = kzalloc(sizeof(struct venc_state), GFP_KERNEL);
+	if (venc == NULL)
+		return -ENOMEM;
+
+	venc->pdev = &pdev->dev;
+	venc->pdata = pdev->dev.platform_data;
+	if (NULL == venc->pdata) {
+		dev_err(venc->pdev, "Unable to get platform data for"
+			" VENC sub device");
+		ret = -ENOENT;
+		goto free_mem;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(venc->pdev,
+			"Unable to get VENC register address map\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), "venc")) {
+		dev_err(venc->pdev, "Unable to reserve VENC MMIO region\n");
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
+	venc->venc_base = ioremap_nocache(res->start, resource_size(res));
+	if (!venc->venc_base) {
+		dev_err(venc->pdev, "Unable to map VENC IO space\n");
+		ret = -ENODEV;
+		goto release_venc_mem_region;
+	}
+
+	spin_lock_init(&venc->lock);
+	platform_set_drvdata(pdev, venc);
+	dev_notice(venc->pdev, "VENC sub device probe success\n");
+	return 0;
+
+release_venc_mem_region:
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+free_mem:
+	kfree(venc);
+	return ret;
+}
+
+static int venc_remove(struct platform_device *pdev)
+{
+	struct venc_state *venc = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap((void *)venc->venc_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(venc);
+
+	return 0;
+}
+
+static struct platform_driver venc_driver = {
+	.probe		= venc_probe,
+	.remove		= venc_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int venc_init(void)
+{
+	if (platform_driver_register(&venc_driver)) {
+		printk(KERN_ERR "Unable to register venc driver\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void venc_exit(void)
+{
+	platform_driver_unregister(&venc_driver);
+	return;
+}
+
+module_init(venc_init);
+module_exit(venc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VPBE VENC Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/video/davinci/vpbe_venc_regs.h b/drivers/media/video/davinci/vpbe_venc_regs.h
new file mode 100644
index 00000000000..947cb151077
--- /dev/null
+++ b/drivers/media/video/davinci/vpbe_venc_regs.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_REGS_H
+#define _VPBE_VENC_REGS_H
+
+/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */
+#define VENC_VMOD				0x00
+#define VENC_VIDCTL				0x04
+#define VENC_VDPRO				0x08
+#define VENC_SYNCCTL				0x0C
+#define VENC_HSPLS				0x10
+#define VENC_VSPLS				0x14
+#define VENC_HINT				0x18
+#define VENC_HSTART				0x1C
+#define VENC_HVALID				0x20
+#define VENC_VINT				0x24
+#define VENC_VSTART				0x28
+#define VENC_VVALID				0x2C
+#define VENC_HSDLY				0x30
+#define VENC_VSDLY				0x34
+#define VENC_YCCCTL				0x38
+#define VENC_RGBCTL				0x3C
+#define VENC_RGBCLP				0x40
+#define VENC_LINECTL				0x44
+#define VENC_CULLLINE				0x48
+#define VENC_LCDOUT				0x4C
+#define VENC_BRTS				0x50
+#define VENC_BRTW				0x54
+#define VENC_ACCTL				0x58
+#define VENC_PWMP				0x5C
+#define VENC_PWMW				0x60
+#define VENC_DCLKCTL				0x64
+#define VENC_DCLKPTN0				0x68
+#define VENC_DCLKPTN1				0x6C
+#define VENC_DCLKPTN2				0x70
+#define VENC_DCLKPTN3				0x74
+#define VENC_DCLKPTN0A				0x78
+#define VENC_DCLKPTN1A				0x7C
+#define VENC_DCLKPTN2A				0x80
+#define VENC_DCLKPTN3A				0x84
+#define VENC_DCLKHS				0x88
+#define VENC_DCLKHSA				0x8C
+#define VENC_DCLKHR				0x90
+#define VENC_DCLKVS				0x94
+#define VENC_DCLKVR				0x98
+#define VENC_CAPCTL				0x9C
+#define VENC_CAPDO				0xA0
+#define VENC_CAPDE				0xA4
+#define VENC_ATR0				0xA8
+#define VENC_ATR1				0xAC
+#define VENC_ATR2				0xB0
+#define VENC_VSTAT				0xB8
+#define VENC_RAMADR				0xBC
+#define VENC_RAMPORT				0xC0
+#define VENC_DACTST				0xC4
+#define VENC_YCOLVL				0xC8
+#define VENC_SCPROG				0xCC
+#define VENC_CVBS				0xDC
+#define VENC_CMPNT				0xE0
+#define VENC_ETMG0				0xE4
+#define VENC_ETMG1				0xE8
+#define VENC_ETMG2				0xEC
+#define VENC_ETMG3				0xF0
+#define VENC_DACSEL				0xF4
+#define VENC_ARGBX0				0x100
+#define VENC_ARGBX1				0x104
+#define VENC_ARGBX2				0x108
+#define VENC_ARGBX3				0x10C
+#define VENC_ARGBX4				0x110
+#define VENC_DRGBX0				0x114
+#define VENC_DRGBX1				0x118
+#define VENC_DRGBX2				0x11C
+#define VENC_DRGBX3				0x120
+#define VENC_DRGBX4				0x124
+#define VENC_VSTARTA				0x128
+#define VENC_OSDCLK0				0x12C
+#define VENC_OSDCLK1				0x130
+#define VENC_HVLDCL0				0x134
+#define VENC_HVLDCL1				0x138
+#define VENC_OSDHADV				0x13C
+#define VENC_CLKCTL				0x140
+#define VENC_GAMCTL				0x144
+#define VENC_XHINTVL				0x174
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VENC_VMOD_VDMD_SHIFT			12
+#define VENC_VMOD_VDMD_YCBCR16			0
+#define VENC_VMOD_VDMD_YCBCR8			1
+#define VENC_VMOD_VDMD_RGB666			2
+#define VENC_VMOD_VDMD_RGB8			3
+#define VENC_VMOD_VDMD_EPSON			4
+#define VENC_VMOD_VDMD_CASIO			5
+#define VENC_VMOD_VDMD_UDISPQVGA		6
+#define VENC_VMOD_VDMD_STNLCD			7
+#define VENC_VMOD_VIE_SHIFT			1
+#define VENC_VMOD_VDMD				(7 << 12)
+#define VENC_VMOD_ITLCL				(1 << 11)
+#define VENC_VMOD_ITLC				(1 << 10)
+#define VENC_VMOD_NSIT				(1 << 9)
+#define VENC_VMOD_HDMD				(1 << 8)
+#define VENC_VMOD_TVTYP_SHIFT			6
+#define VENC_VMOD_TVTYP				(3 << 6)
+#define VENC_VMOD_SLAVE				(1 << 5)
+#define VENC_VMOD_VMD				(1 << 4)
+#define VENC_VMOD_BLNK				(1 << 3)
+#define VENC_VMOD_VIE				(1 << 1)
+#define VENC_VMOD_VENC				(1 << 0)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define VENC_VIDCTL_VCLKP			(1 << 14)
+#define VENC_VIDCTL_VCLKE_SHIFT			13
+#define VENC_VIDCTL_VCLKE			(1 << 13)
+#define VENC_VIDCTL_VCLKZ_SHIFT			12
+#define VENC_VIDCTL_VCLKZ			(1 << 12)
+#define VENC_VIDCTL_SYDIR_SHIFT			8
+#define VENC_VIDCTL_SYDIR			(1 << 8)
+#define VENC_VIDCTL_DOMD_SHIFT			4
+#define VENC_VIDCTL_DOMD			(3 << 4)
+#define VENC_VIDCTL_YCDIR_SHIFT			0
+#define VENC_VIDCTL_YCDIR			(1 << 0)
+
+#define VENC_VDPRO_ATYCC_SHIFT			5
+#define VENC_VDPRO_ATYCC			(1 << 5)
+#define VENC_VDPRO_ATCOM_SHIFT			4
+#define VENC_VDPRO_ATCOM			(1 << 4)
+#define VENC_VDPRO_DAFRQ			(1 << 3)
+#define VENC_VDPRO_DAUPS			(1 << 2)
+#define VENC_VDPRO_CUPS				(1 << 1)
+#define VENC_VDPRO_YUPS				(1 << 0)
+
+#define VENC_SYNCCTL_VPL_SHIFT			3
+#define VENC_SYNCCTL_VPL			(1 << 3)
+#define VENC_SYNCCTL_HPL_SHIFT			2
+#define VENC_SYNCCTL_HPL			(1 << 2)
+#define VENC_SYNCCTL_SYEV_SHIFT			1
+#define VENC_SYNCCTL_SYEV			(1 << 1)
+#define VENC_SYNCCTL_SYEH_SHIFT			0
+#define VENC_SYNCCTL_SYEH			(1 << 0)
+#define VENC_SYNCCTL_OVD_SHIFT			14
+#define VENC_SYNCCTL_OVD			(1 << 14)
+
+#define VENC_DCLKCTL_DCKEC_SHIFT		11
+#define VENC_DCLKCTL_DCKEC			(1 << 11)
+#define VENC_DCLKCTL_DCKPW_SHIFT		0
+#define VENC_DCLKCTL_DCKPW			(0x3f << 0)
+
+#define VENC_VSTAT_FIDST			(1 << 4)
+
+#define VENC_CMPNT_MRGB_SHIFT			14
+#define VENC_CMPNT_MRGB				(1 << 14)
+
+#endif				/* _VPBE_VENC_REGS_H */
diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
index d93ad74a34c..49e4deb5004 100644
--- a/drivers/media/video/davinci/vpif_capture.c
+++ b/drivers/media/video/davinci/vpif_capture.c
@@ -33,7 +33,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
@@ -44,6 +43,7 @@
 
 MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_CAPTURE_VERSION);
 
 #define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
 #define vpif_dbg(level, debug, fmt, arg...)	\
@@ -1677,7 +1677,6 @@ static int vpif_querycap(struct file *file, void  *priv,
 {
 	struct vpif_capture_config *config = vpif_dev->platform_data;
 
-	cap->version = VPIF_CAPTURE_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	strlcpy(cap->driver, "vpif capture", sizeof(cap->driver));
 	strlcpy(cap->bus_info, "DM646x Platform", sizeof(cap->bus_info));
@@ -2211,10 +2210,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
 		vfd->release = video_device_release;
 		snprintf(vfd->name, sizeof(vfd->name),
-			 "DM646x_VPIFCapture_DRIVER_V%d.%d.%d",
-			 (VPIF_CAPTURE_VERSION_CODE >> 16) & 0xff,
-			 (VPIF_CAPTURE_VERSION_CODE >> 8) & 0xff,
-			 (VPIF_CAPTURE_VERSION_CODE) & 0xff);
+			 "DM646x_VPIFCapture_DRIVER_V%s",
+			 VPIF_CAPTURE_VERSION);
 		/* Set video_dev to the video device */
 		ch->video_dev = vfd;
 	}
diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h
index 7a4196dfdce..064550f5ce4 100644
--- a/drivers/media/video/davinci/vpif_capture.h
+++ b/drivers/media/video/davinci/vpif_capture.h
@@ -23,7 +23,6 @@
 
 /* Header files */
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-core.h>
@@ -33,11 +32,7 @@
 #include "vpif.h"
 
 /* Macros */
-#define VPIF_MAJOR_RELEASE		0
-#define VPIF_MINOR_RELEASE		0
-#define VPIF_BUILD			1
-#define VPIF_CAPTURE_VERSION_CODE	((VPIF_MAJOR_RELEASE << 16) | \
-	(VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+#define VPIF_CAPTURE_VERSION		"0.0.2"
 
 #define VPIF_VALID_FIELD(field)		(((V4L2_FIELD_ANY == field) || \
 	(V4L2_FIELD_NONE == field)) || \
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index cdf659abdc2..286f0291004 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -29,7 +29,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 
 #include <asm/irq.h>
@@ -47,6 +46,7 @@
 
 MODULE_DESCRIPTION("TI DaVinci VPIF Display driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_DISPLAY_VERSION);
 
 #define DM646X_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50)
 
@@ -701,7 +701,6 @@ static int vpif_querycap(struct file *file, void  *priv,
 {
 	struct vpif_display_config *config = vpif_dev->platform_data;
 
-	cap->version = VPIF_DISPLAY_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
 	strlcpy(cap->driver, "vpif display", sizeof(cap->driver));
 	strlcpy(cap->bus_info, "Platform", sizeof(cap->bus_info));
@@ -1740,10 +1739,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vfd->v4l2_dev = &vpif_obj.v4l2_dev;
 		vfd->release = video_device_release;
 		snprintf(vfd->name, sizeof(vfd->name),
-			 "DM646x_VPIFDisplay_DRIVER_V%d.%d.%d",
-			 (VPIF_DISPLAY_VERSION_CODE >> 16) & 0xff,
-			 (VPIF_DISPLAY_VERSION_CODE >> 8) & 0xff,
-			 (VPIF_DISPLAY_VERSION_CODE) & 0xff);
+			 "DM646x_VPIFDisplay_DRIVER_V%s",
+			 VPIF_DISPLAY_VERSION);
 
 		/* Set video_dev to the video device */
 		ch->video_dev = vfd;
diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h
index b53aaa88307..5d1936dafed 100644
--- a/drivers/media/video/davinci/vpif_display.h
+++ b/drivers/media/video/davinci/vpif_display.h
@@ -18,7 +18,6 @@
 
 /* Header files */
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/videobuf-core.h>
@@ -27,12 +26,7 @@
 #include "vpif.h"
 
 /* Macros */
-#define VPIF_MAJOR_RELEASE	(0)
-#define VPIF_MINOR_RELEASE	(0)
-#define VPIF_BUILD		(1)
-
-#define VPIF_DISPLAY_VERSION_CODE \
-	((VPIF_MAJOR_RELEASE << 16) | (VPIF_MINOR_RELEASE << 8) | VPIF_BUILD)
+#define VPIF_DISPLAY_VERSION	"0.0.2"
 
 #define VPIF_VALID_FIELD(field) \
 	(((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 3cb78f26df9..281ee427c2a 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -3,7 +3,6 @@ config VIDEO_EM28XX
 	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
@@ -40,7 +39,18 @@ config VIDEO_EM28XX_DVB
 	select DVB_S921 if !DVB_FE_CUSTOMISE
 	select DVB_DRXD if !DVB_FE_CUSTOMISE
 	select DVB_CXD2820R if !DVB_FE_CUSTOMISE
+	select DVB_DRXK if !DVB_FE_CUSTOMISE
+	select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the
 	  Empiatech em28xx chips.
+
+config VIDEO_EM28XX_RC
+        bool "EM28XX Remote Controller support"
+        depends on RC_CORE
+        depends on VIDEO_EM28XX
+        depends on !(RC_CORE=m && VIDEO_EM28XX=y)
+        default y
+        ---help---
+          Enables Remote Controller support on em28xx driver.
diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile
index d0f093d1d0d..38aaa004f57 100644
--- a/drivers/media/video/em28xx/Makefile
+++ b/drivers/media/video/em28xx/Makefile
@@ -1,5 +1,7 @@
-em28xx-objs     := em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-core.o \
-		   em28xx-input.o em28xx-vbi.o
+em28xx-y :=	em28xx-video.o em28xx-i2c.o em28xx-cards.o
+em28xx-y +=	em28xx-core.o  em28xx-vbi.o
+
+em28xx-$(CONFIG_VIDEO_EM28XX_RC) += em28xx-input.o
 
 em28xx-alsa-objs := em28xx-audio.o
 
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index 3c48a72eb7d..cff0768afbf 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -3,9 +3,9 @@
  *
  *  Copyright (C) 2006 Markus Rechberger <mrechberger@gmail.com>
  *
- *  Copyright (C) 2007 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *  Copyright (C) 2007-2011 Mauro Carvalho Chehab <mchehab@redhat.com>
  *	- Port to work with the in-kernel driver
- *	- Several cleanups
+ *	- Cleanups, fixes, alsa-controls, etc.
  *
  *  This driver is based on my previous au600 usb pstn audio driver
  *  and inherits all the copyrights
@@ -41,6 +41,7 @@
 #include <sound/info.h>
 #include <sound/initval.h>
 #include <sound/control.h>
+#include <sound/tlv.h>
 #include <media/v4l2-common.h>
 #include "em28xx.h"
 
@@ -212,9 +213,12 @@ static int em28xx_init_audio_isoc(struct em28xx *dev)
 	for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
 		errCode = usb_submit_urb(dev->adev.urb[i], GFP_ATOMIC);
 		if (errCode) {
+			em28xx_errdev("submit of audio urb failed\n");
 			em28xx_deinit_isoc_audio(dev);
+			atomic_set(&dev->stream_started, 0);
 			return errCode;
 		}
+
 	}
 
 	return 0;
@@ -245,6 +249,7 @@ static struct snd_pcm_hardware snd_em28xx_hw_capture = {
 	.info = SNDRV_PCM_INFO_BLOCK_TRANSFER |
 		SNDRV_PCM_INFO_MMAP           |
 		SNDRV_PCM_INFO_INTERLEAVED    |
+		SNDRV_PCM_INFO_BATCH	      |
 		SNDRV_PCM_INFO_MMAP_VALID,
 
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
@@ -276,24 +281,27 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream)
 		return -ENODEV;
 	}
 
-	/* Sets volume, mute, etc */
+	runtime->hw = snd_em28xx_hw_capture;
+	if ((dev->alt == 0 || dev->audio_ifnum) && dev->adev.users == 0) {
+		if (dev->audio_ifnum)
+			dev->alt = 1;
+		else
+			dev->alt = 7;
 
-	dev->mute = 0;
-	mutex_lock(&dev->lock);
-	ret = em28xx_audio_analog_set(dev);
-	if (ret < 0)
-		goto err;
+		dprintk("changing alternate number on interface %d to %d\n",
+			dev->audio_ifnum, dev->alt);
+		usb_set_interface(dev->udev, dev->audio_ifnum, dev->alt);
 
-	runtime->hw = snd_em28xx_hw_capture;
-	if (dev->alt == 0 && dev->adev.users == 0) {
-		int errCode;
-		dev->alt = 7;
-		dprintk("changing alternate number to 7\n");
-		errCode = usb_set_interface(dev->udev, 0, 7);
-	}
+		/* Sets volume, mute, etc */
+		dev->mute = 0;
+		mutex_lock(&dev->lock);
+		ret = em28xx_audio_analog_set(dev);
+		if (ret < 0)
+			goto err;
 
-	dev->adev.users++;
-	mutex_unlock(&dev->lock);
+		dev->adev.users++;
+		mutex_unlock(&dev->lock);
+	}
 
 	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
 	dev->adev.capture_pcm_substream = substream;
@@ -342,6 +350,8 @@ static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream,
 
 	ret = snd_pcm_alloc_vmalloc_buffer(substream,
 				params_buffer_bytes(hw_params));
+	if (ret < 0)
+		return ret;
 	format = params_format(hw_params);
 	rate = params_rate(hw_params);
 	channels = params_channels(hw_params);
@@ -393,20 +403,24 @@ static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream,
 				      int cmd)
 {
 	struct em28xx *dev = snd_pcm_substream_chip(substream);
-	int retval;
+	int retval = 0;
 
 	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */
+	case SNDRV_PCM_TRIGGER_RESUME: /* fall through */
 	case SNDRV_PCM_TRIGGER_START:
 		atomic_set(&dev->stream_started, 1);
 		break;
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */
+	case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */
 	case SNDRV_PCM_TRIGGER_STOP:
-		atomic_set(&dev->stream_started, 1);
+		atomic_set(&dev->stream_started, 0);
 		break;
 	default:
 		retval = -EINVAL;
 	}
 	schedule_work(&dev->wq_trigger);
-	return 0;
+	return retval;
 }
 
 static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream
@@ -432,6 +446,179 @@ static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
 	return vmalloc_to_page(pageptr);
 }
 
+/*
+ * AC97 volume control support
+ */
+static int em28xx_vol_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *info)
+{
+	info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	info->count = 2;
+	info->value.integer.min = 0;
+	info->value.integer.max = 0x1f;
+
+	return 0;
+}
+
+static int em28xx_vol_put(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	u16 val = (0x1f - (value->value.integer.value[0] & 0x1f)) |
+		  (0x1f - (value->value.integer.value[1] & 0x1f)) << 8;
+	int rc;
+
+	mutex_lock(&dev->lock);
+	rc = em28xx_read_ac97(dev, kcontrol->private_value);
+	if (rc < 0)
+		goto err;
+
+	val |= rc & 0x8000;	/* Preserve the mute flag */
+
+	rc = em28xx_write_ac97(dev, kcontrol->private_value, val);
+	if (rc < 0)
+		goto err;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) to ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+err:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
+static int em28xx_vol_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	int val;
+
+	mutex_lock(&dev->lock);
+	val = em28xx_read_ac97(dev, kcontrol->private_value);
+	mutex_unlock(&dev->lock);
+	if (val < 0)
+		return val;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) from ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+	value->value.integer.value[0] = 0x1f - (val & 0x1f);
+	value->value.integer.value[1] = 0x1f - ((val << 8) & 0x1f);
+
+	return 0;
+}
+
+static int em28xx_vol_put_mute(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	u16 val = value->value.integer.value[0];
+	int rc;
+
+	mutex_lock(&dev->lock);
+	rc = em28xx_read_ac97(dev, kcontrol->private_value);
+	if (rc < 0)
+		goto err;
+
+	if (val)
+		rc &= 0x1f1f;
+	else
+		rc |= 0x8000;
+
+	rc = em28xx_write_ac97(dev, kcontrol->private_value, rc);
+	if (rc < 0)
+		goto err;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) to ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+err:
+	mutex_unlock(&dev->lock);
+	return rc;
+}
+
+static int em28xx_vol_get_mute(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct em28xx *dev = snd_kcontrol_chip(kcontrol);
+	int val;
+
+	mutex_lock(&dev->lock);
+	val = em28xx_read_ac97(dev, kcontrol->private_value);
+	mutex_unlock(&dev->lock);
+	if (val < 0)
+		return val;
+
+	if (val & 0x8000)
+		value->value.integer.value[0] = 0;
+	else
+		value->value.integer.value[0] = 1;
+
+	dprintk("%sleft vol %d, right vol %d (0x%04x) from ac97 volume control 0x%04x\n",
+		(val & 0x8000) ? "muted " : "",
+		0x1f - ((val >> 8) & 0x1f), 0x1f - (val & 0x1f),
+		val, (int)kcontrol->private_value);
+
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(em28xx_db_scale, -3450, 150, 0);
+
+static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev,
+			   char *name, int id)
+{
+	int err;
+	char ctl_name[44];
+	struct snd_kcontrol *kctl;
+	struct snd_kcontrol_new tmp;
+
+	memset (&tmp, 0, sizeof(tmp));
+	tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	tmp.private_value = id,
+	tmp.name  = ctl_name,
+
+	/* Add Mute Control */
+	sprintf(ctl_name, "%s Switch", name);
+	tmp.get  = em28xx_vol_get_mute;
+	tmp.put  = em28xx_vol_put_mute;
+	tmp.info = snd_ctl_boolean_mono_info;
+	kctl = snd_ctl_new1(&tmp, dev);
+	err = snd_ctl_add(card, kctl);
+	if (err < 0)
+		return err;
+	dprintk("Added control %s for ac97 volume control 0x%04x\n",
+		ctl_name, id);
+
+	memset (&tmp, 0, sizeof(tmp));
+	tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	tmp.private_value = id,
+	tmp.name  = ctl_name,
+
+	/* Add Volume Control */
+	sprintf(ctl_name, "%s Volume", name);
+	tmp.get   = em28xx_vol_get;
+	tmp.put   = em28xx_vol_put;
+	tmp.info  = em28xx_vol_info;
+	tmp.tlv.p = em28xx_db_scale,
+	kctl = snd_ctl_new1(&tmp, dev);
+	err = snd_ctl_add(card, kctl);
+	if (err < 0)
+		return err;
+	dprintk("Added control %s for ac97 volume control 0x%04x\n",
+		ctl_name, id);
+
+	return 0;
+}
+
+/*
+ * register/unregister code and data
+ */
 static struct snd_pcm_ops snd_em28xx_pcm_capture = {
 	.open      = snd_em28xx_capture_open,
 	.close     = snd_em28xx_pcm_close,
@@ -452,17 +639,17 @@ static int em28xx_audio_init(struct em28xx *dev)
 	static int          devnr;
 	int                 err;
 
-	if (dev->has_alsa_audio != 1) {
+	if (!dev->has_alsa_audio || dev->audio_ifnum < 0) {
 		/* This device does not support the extension (in this case
 		   the device is expecting the snd-usb-audio module or
 		   doesn't have analog audio support at all) */
 		return 0;
 	}
 
-	printk(KERN_INFO "em28xx-audio.c: probing for em28x1 "
-			 "non standard usbaudio\n");
+	printk(KERN_INFO "em28xx-audio.c: probing for em28xx Audio Vendor Class\n");
 	printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus "
 			 "Rechberger\n");
+	printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2007-2011 Mauro Carvalho Chehab\n");
 
 	err = snd_card_create(index[devnr], "Em28xx Audio", THIS_MODULE, 0,
 			      &card);
@@ -488,6 +675,22 @@ static int em28xx_audio_init(struct em28xx *dev)
 
 	INIT_WORK(&dev->wq_trigger, audio_trigger);
 
+	if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
+		em28xx_cvol_new(card, dev, "Video", AC97_VIDEO_VOL);
+		em28xx_cvol_new(card, dev, "Line In", AC97_LINEIN_VOL);
+		em28xx_cvol_new(card, dev, "Phone", AC97_PHONE_VOL);
+		em28xx_cvol_new(card, dev, "Microphone", AC97_PHONE_VOL);
+		em28xx_cvol_new(card, dev, "CD", AC97_CD_VOL);
+		em28xx_cvol_new(card, dev, "AUX", AC97_AUX_VOL);
+		em28xx_cvol_new(card, dev, "PCM", AC97_PCM_OUT_VOL);
+
+		em28xx_cvol_new(card, dev, "Master", AC97_MASTER_VOL);
+		em28xx_cvol_new(card, dev, "Line", AC97_LINE_LEVEL_VOL);
+		em28xx_cvol_new(card, dev, "Mono", AC97_MASTER_MONO_VOL);
+		em28xx_cvol_new(card, dev, "LFE", AC97_LFE_MASTER_VOL);
+		em28xx_cvol_new(card, dev, "Surround", AC97_SURR_MASTER_VOL);
+	}
+
 	err = snd_card_register(card);
 	if (err < 0) {
 		snd_card_free(card);
@@ -538,7 +741,7 @@ static void __exit em28xx_alsa_unregister(void)
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Markus Rechberger <mrechberger@gmail.com>");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
 MODULE_DESCRIPTION("Em28xx Audio driver");
 
 module_init(em28xx_alsa_register);
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 4e37375decf..3e3959fee41 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -289,7 +289,7 @@ static struct em28xx_reg_seq leadership_reset[] = {
 	{	-1,		-1,	-1,	-1},
 };
 
-/* 2013:024f PCTV Systems nanoStick T2 290e
+/* 2013:024f PCTV nanoStick T2 290e
  * GPIO_6 - demod reset
  * GPIO_7 - LED
  */
@@ -300,6 +300,23 @@ static struct em28xx_reg_seq pctv_290e[] = {
 	{-1,			-1,	-1,		-1},
 };
 
+#if 0
+static struct em28xx_reg_seq terratec_h5_gpio[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+	{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+	{EM2874_R80_GPIO,	0xf2,	0xff,	50},
+	{EM2874_R80_GPIO,	0xf6,	0xff,	50},
+	{ -1,			-1,	-1,	-1},
+};
+
+static struct em28xx_reg_seq terratec_h5_digital[] = {
+	{EM2874_R80_GPIO,	0xf6,	0xff,	10},
+	{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+	{EM2874_R80_GPIO,	0xa6,	0xff,	10},
+	{ -1,			-1,	-1,	-1},
+};
+#endif
+
 /*
  *  Board definitions
  */
@@ -843,6 +860,19 @@ struct em28xx_board em28xx_boards[] = {
 			.gpio     = terratec_cinergy_USB_XS_FR_analog,
 		} },
 	},
+	[EM2884_BOARD_TERRATEC_H5] = {
+		.name         = "Terratec Cinergy H5",
+		.has_dvb      = 1,
+#if 0
+		.tuner_type   = TUNER_PHILIPS_TDA8290,
+		.tuner_addr   = 0x41,
+		.dvb_gpio     = terratec_h5_digital, /* FIXME: probably wrong */
+		.tuner_gpio   = terratec_h5_gpio,
+#endif
+		.i2c_speed    = EM2874_I2C_SECONDARY_BUS_SELECT |
+				EM28XX_I2C_CLK_WAIT_ENABLE |
+				EM28XX_I2C_FREQ_400_KHZ,
+	},
 	[EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 		.name         = "Hauppauge WinTV HVR 900",
 		.tda9887_conf = TDA9887_PRESENT,
@@ -1259,7 +1289,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 
-	[EM2874_LEADERSHIP_ISDBT] = {
+	[EM2874_BOARD_LEADERSHIP_ISDBT] = {
 		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
 				  EM28XX_I2C_CLK_WAIT_ENABLE |
 				  EM28XX_I2C_FREQ_100_KHZ,
@@ -1319,7 +1349,6 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2880_BOARD_KWORLD_DVB_305U] = {
 		.name	      = "KWorld DVB-T 305U",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
@@ -1770,16 +1799,16 @@ struct em28xx_board em28xx_boards[] = {
 		.dvb_gpio   = kworld_a340_digital,
 		.tuner_gpio = default_tuner_gpio,
 	},
-	/* 2013:024f PCTV Systems nanoStick T2 290e.
+	/* 2013:024f PCTV nanoStick T2 290e.
 	 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */
 	[EM28174_BOARD_PCTV_290E] = {
+		.name          = "PCTV nanoStick T2 290e",
 		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
 			EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
-		.xclk          = EM28XX_XCLK_FREQUENCY_12MHZ,
-		.name          = "PCTV Systems nanoStick T2 290e",
 		.tuner_type    = TUNER_ABSENT,
 		.tuner_gpio    = pctv_290e,
 		.has_dvb       = 1,
+		.ir_codes      = RC_MAP_PINNACLE_PCTV_HD,
 	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1855,8 +1884,10 @@ struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0x0ccd, 0x0042),
 			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0043),
-			.driver_info = EM2870_BOARD_TERRATEC_XS },
-	{ USB_DEVICE(0x0ccd, 0x0047),
+			.driver_info = EM2884_BOARD_TERRATEC_H5 },
+	{ USB_DEVICE(0x0ccd, 0x10a2),	/* Rev. 1 */
+			.driver_info = EM2884_BOARD_TERRATEC_H5 },
+	{ USB_DEVICE(0x0ccd, 0x10ad),	/* Rev. 2 */
 			.driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
 	{ USB_DEVICE(0x0ccd, 0x0084),
 			.driver_info = EM2860_BOARD_TERRATEC_AV350 },
@@ -1937,7 +1968,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
 	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
 	{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
-	{0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
+	{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
 };
 
 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
@@ -2660,10 +2691,9 @@ void em28xx_card_setup(struct em28xx *dev)
 			.addr = 0xba >> 1,
 			.platform_data = &pdata,
 		};
-		struct v4l2_subdev *sd;
 
 		pdata.xtal = dev->sensor_xtal;
-		sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
+		v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
 				&mt9v011_info, NULL);
 	}
 
@@ -2842,11 +2872,26 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 			em28xx_info("chip ID is em2882/em2883\n");
 			dev->wait_after_write = 0;
 			break;
+		case CHIP_ID_EM2884:
+			em28xx_info("chip ID is em2884\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
+			dev->wait_after_write = 0;
+			break;
 		default:
 			em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
 		}
 	}
 
+	if (dev->is_audio_only) {
+		errCode = em28xx_audio_setup(dev);
+		if (errCode)
+			return -ENODEV;
+		em28xx_add_into_devlist(dev);
+		em28xx_init_extension(dev);
+
+		return 0;
+	}
+
 	/* Prepopulate cached GPO register content */
 	retval = em28xx_read_reg(dev, dev->reg_gpo_num);
 	if (retval >= 0)
@@ -2947,6 +2992,9 @@ fail_reg_devices:
 	return retval;
 }
 
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
+
 /*
  * em28xx_usb_probe()
  * checks for supported devices
@@ -2956,15 +3004,15 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 {
 	const struct usb_endpoint_descriptor *endpoint;
 	struct usb_device *udev;
-	struct usb_interface *uif;
 	struct em28xx *dev = NULL;
 	int retval;
-	int i, nr, ifnum, isoc_pipe;
+	bool is_audio_only = false, has_audio = false;
+	int i, nr, isoc_pipe;
+	const int ifnum = interface->altsetting[0].desc.bInterfaceNumber;
 	char *speed;
 	char descr[255] = "";
 
 	udev = usb_get_dev(interface_to_usbdev(interface));
-	ifnum = interface->altsetting[0].desc.bInterfaceNumber;
 
 	/* Check to see next free device and mark as used */
 	nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
@@ -2984,6 +3032,19 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		goto err;
 	}
 
+	/* Get endpoints */
+	for (i = 0; i < interface->num_altsetting; i++) {
+		int ep;
+
+		for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
+			struct usb_host_endpoint	*e;
+			e = &interface->altsetting[i].endpoint[ep];
+
+			if (e->desc.bEndpointAddress == 0x83)
+				has_audio = true;
+		}
+	}
+
 	endpoint = &interface->cur_altsetting->endpoint[0].desc;
 
 	/* check if the device has the iso in endpoint at the correct place */
@@ -3003,19 +3064,22 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 			check_interface = 0;
 
 		if (!check_interface) {
-			em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
-				"interface %i, class %i found.\n",
-				le16_to_cpu(udev->descriptor.idVendor),
-				le16_to_cpu(udev->descriptor.idProduct),
-				ifnum,
-				interface->altsetting[0].desc.bInterfaceClass);
-
-			em28xx_err(DRIVER_NAME " This is an anciliary "
-				"interface not used by the driver\n");
-
-			em28xx_devused &= ~(1<<nr);
-			retval = -ENODEV;
-			goto err;
+			if (has_audio) {
+				is_audio_only = true;
+			} else {
+				em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
+					"interface %i, class %i found.\n",
+					le16_to_cpu(udev->descriptor.idVendor),
+					le16_to_cpu(udev->descriptor.idProduct),
+					ifnum,
+					interface->altsetting[0].desc.bInterfaceClass);
+				em28xx_err(DRIVER_NAME " This is an anciliary "
+					"interface not used by the driver\n");
+
+				em28xx_devused &= ~(1<<nr);
+				retval = -ENODEV;
+				goto err;
+			}
 		}
 	}
 
@@ -3045,8 +3109,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	if (*descr)
 		strlcat(descr, " ", sizeof(descr));
 
-	printk(DRIVER_NAME ": New device %s@ %s Mbps "
-		"(%04x:%04x, interface %d, class %d)\n",
+	printk(KERN_INFO DRIVER_NAME
+		": New device %s@ %s Mbps (%04x:%04x, interface %d, class %d)\n",
 		descr,
 		speed,
 		le16_to_cpu(udev->descriptor.idVendor),
@@ -3054,6 +3118,11 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		ifnum,
 		interface->altsetting->desc.bInterfaceNumber);
 
+	if (has_audio)
+		printk(KERN_INFO DRIVER_NAME
+		       ": Audio Vendor Class interface %i found\n",
+		       ifnum);
+
 	/*
 	 * Make sure we have 480 Mbps of bandwidth, otherwise things like
 	 * video stream wouldn't likely work, since 12 Mbps is generally
@@ -3089,10 +3158,13 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	dev->devno = nr;
 	dev->model = id->driver_info;
 	dev->alt   = -1;
+	dev->is_audio_only = is_audio_only;
+	dev->has_alsa_audio = has_audio;
+	dev->audio_ifnum = ifnum;
 
 	/* Checks if audio is provided by some interface */
 	for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
-		uif = udev->config->interface[i];
+		struct usb_interface *uif = udev->config->interface[i];
 		if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
 			dev->has_audio_class = 1;
 			break;
@@ -3100,9 +3172,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	}
 
 	/* compute alternate max packet sizes */
-	uif = udev->actconfig->interface[0];
-
-	dev->num_alt = uif->num_altsetting;
+	dev->num_alt = interface->num_altsetting;
 	dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
 
 	if (dev->alt_max_pkt_size == NULL) {
@@ -3114,14 +3184,21 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	}
 
 	for (i = 0; i < dev->num_alt ; i++) {
-		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
-		dev->alt_max_pkt_size[i] =
-		    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
+		u16 tmp = le16_to_cpu(interface->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
+		unsigned int size = tmp & 0x7ff;
+
+		if (udev->speed == USB_SPEED_HIGH)
+			size = size * hb_mult(tmp);
+
+		dev->alt_max_pkt_size[i] = size;
 	}
 
 	if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
 		dev->model = card[nr];
 
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, dev);
+
 	/* allocate device struct */
 	mutex_init(&dev->lock);
 	mutex_lock(&dev->lock);
@@ -3133,9 +3210,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 		goto err;
 	}
 
-	/* save our data pointer in this interface device */
-	usb_set_intfdata(interface, dev);
-
 	request_modules(dev);
 
 	/* Should be the last thing to do, to avoid newer udev's to
@@ -3164,6 +3238,13 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
 	if (!dev)
 		return;
 
+	if (dev->is_audio_only) {
+		mutex_lock(&dev->lock);
+		em28xx_close_extension(dev);
+		mutex_unlock(&dev->lock);
+		return;
+	}
+
 	em28xx_info("disconnecting %s\n", dev->vdev->name);
 
 	flush_request_modules(dev);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index e33f145d867..57b1b5c6d88 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -211,6 +211,7 @@ int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val)
 {
 	return em28xx_write_regs(dev, reg, &val, 1);
 }
+EXPORT_SYMBOL_GPL(em28xx_write_reg);
 
 /*
  * em28xx_write_reg_bits()
@@ -286,6 +287,7 @@ int em28xx_read_ac97(struct em28xx *dev, u8 reg)
 		return ret;
 	return le16_to_cpu(val);
 }
+EXPORT_SYMBOL_GPL(em28xx_read_ac97);
 
 /*
  * em28xx_write_ac97()
@@ -313,13 +315,14 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(em28xx_write_ac97);
 
-struct em28xx_vol_table {
+struct em28xx_vol_itable {
 	enum em28xx_amux mux;
 	u8		 reg;
 };
 
-static struct em28xx_vol_table inputs[] = {
+static struct em28xx_vol_itable inputs[] = {
 	{ EM28XX_AMUX_VIDEO, 	AC97_VIDEO_VOL   },
 	{ EM28XX_AMUX_LINE_IN,	AC97_LINEIN_VOL  },
 	{ EM28XX_AMUX_PHONE,	AC97_PHONE_VOL   },
@@ -403,7 +406,12 @@ static int em28xx_set_audio_source(struct em28xx *dev)
 	return ret;
 }
 
-static const struct em28xx_vol_table outputs[] = {
+struct em28xx_vol_otable {
+	enum em28xx_aout mux;
+	u8		 reg;
+};
+
+static const struct em28xx_vol_otable outputs[] = {
 	{ EM28XX_AOUT_MASTER, AC97_MASTER_VOL      },
 	{ EM28XX_AOUT_LINE,   AC97_LINE_LEVEL_VOL  },
 	{ EM28XX_AOUT_MONO,   AC97_MASTER_MONO_VOL },
@@ -492,17 +500,13 @@ int em28xx_audio_setup(struct em28xx *dev)
 	if (dev->chip_id == CHIP_ID_EM2870 || dev->chip_id == CHIP_ID_EM2874
 		|| dev->chip_id == CHIP_ID_EM28174) {
 		/* Digital only device - don't load any alsa module */
-		dev->audio_mode.has_audio = 0;
-		dev->has_audio_class = 0;
-		dev->has_alsa_audio = 0;
+		dev->audio_mode.has_audio = false;
+		dev->has_audio_class = false;
+		dev->has_alsa_audio = false;
 		return 0;
 	}
 
-	/* If device doesn't support Usb Audio Class, use vendor class */
-	if (!dev->has_audio_class)
-		dev->has_alsa_audio = 1;
-
-	dev->audio_mode.has_audio = 1;
+	dev->audio_mode.has_audio = true;
 
 	/* See how this device is configured */
 	cfg = em28xx_read_reg(dev, EM28XX_R00_CHIPCFG);
@@ -512,8 +516,8 @@ int em28xx_audio_setup(struct em28xx *dev)
 		cfg = EM28XX_CHIPCFG_AC97; /* Be conservative */
 	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) == 0x00) {
 		/* The device doesn't have vendor audio at all */
-		dev->has_alsa_audio = 0;
-		dev->audio_mode.has_audio = 0;
+		dev->has_alsa_audio = false;
+		dev->audio_mode.has_audio = false;
 		return 0;
 	} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
 		   EM28XX_CHIPCFG_I2S_3_SAMPRATES) {
@@ -542,8 +546,8 @@ int em28xx_audio_setup(struct em28xx *dev)
 		 */
 		em28xx_warn("AC97 chip type couldn't be determined\n");
 		dev->audio_mode.ac97 = EM28XX_NO_AC97;
-		dev->has_alsa_audio = 0;
-		dev->audio_mode.has_audio = 0;
+		dev->has_alsa_audio = false;
+		dev->audio_mode.has_audio = false;
 		goto init_audio;
 	}
 
@@ -615,7 +619,9 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 {
 	int rc;
 
-	if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) {
+	if (dev->chip_id == CHIP_ID_EM2874 ||
+	    dev->chip_id == CHIP_ID_EM2884 ||
+	    dev->chip_id == CHIP_ID_EM28174) {
 		/* The Transport Stream Enable Register moved in em2874 */
 		if (!start) {
 			rc = em28xx_write_reg_bits(dev, EM2874_R5F_TS_ENABLE,
@@ -884,6 +890,7 @@ int em28xx_gpio_set(struct em28xx *dev, struct em28xx_reg_seq *gpio)
 	}
 	return rc;
 }
+EXPORT_SYMBOL_GPL(em28xx_gpio_set);
 
 int em28xx_set_mode(struct em28xx *dev, enum em28xx_mode set_mode)
 {
@@ -917,7 +924,7 @@ EXPORT_SYMBOL_GPL(em28xx_set_mode);
 static void em28xx_irq_callback(struct urb *urb)
 {
 	struct em28xx *dev = urb->context;
-	int rc, i;
+	int i;
 
 	switch (urb->status) {
 	case 0:             /* success */
@@ -934,7 +941,7 @@ static void em28xx_irq_callback(struct urb *urb)
 
 	/* Copy data from URB */
 	spin_lock(&dev->slock);
-	rc = dev->isoc_ctl.isoc_copy(dev, urb);
+	dev->isoc_ctl.isoc_copy(dev, urb);
 	spin_unlock(&dev->slock);
 
 	/* Reset urb buffers */
@@ -1106,17 +1113,19 @@ EXPORT_SYMBOL_GPL(em28xx_init_isoc);
 int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
 {
 	unsigned int chip_cfg2;
-	unsigned int packet_size = 564;
-
-	if (dev->chip_id == CHIP_ID_EM2874) {
-		/* FIXME - for now assume 564 like it was before, but the
-		   em2874 code should be added to return the proper value... */
-		packet_size = 564;
-	} else if (dev->chip_id == CHIP_ID_EM28174) {
-		/* FIXME same as em2874. 564 was enough for 22 Mbit DVB-T
-		   but too much for 44 Mbit DVB-C. */
-		packet_size = 752;
-	} else {
+	unsigned int packet_size;
+
+	switch (dev->chip_id) {
+	case CHIP_ID_EM2710:
+	case CHIP_ID_EM2750:
+	case CHIP_ID_EM2800:
+	case CHIP_ID_EM2820:
+	case CHIP_ID_EM2840:
+	case CHIP_ID_EM2860:
+		/* No DVB support */
+		return -EINVAL;
+	case CHIP_ID_EM2870:
+	case CHIP_ID_EM2883:
 		/* TS max packet size stored in bits 1-0 of R01 */
 		chip_cfg2 = em28xx_read_reg(dev, EM28XX_R01_CHIPCFG2);
 		switch (chip_cfg2 & EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK) {
@@ -1133,9 +1142,24 @@ int em28xx_isoc_dvb_max_packetsize(struct em28xx *dev)
 			packet_size = 752;
 			break;
 		}
+		break;
+	case CHIP_ID_EM2874:
+		/*
+		 * FIXME: for now assumes 564 like it was before, but the
+		 * em2874 code should be added to return the proper value
+		 */
+		packet_size = 564;
+		break;
+	case CHIP_ID_EM2884:
+	case CHIP_ID_EM28174:
+	default:
+		/*
+		 * FIXME: same as em2874. 564 was enough for 22 Mbit DVB-T
+		 * but not enough for 44 Mbit DVB-C.
+		 */
+		packet_size = 752;
 	}
 
-	em28xx_coredbg("dvb max packet size=%d\n", packet_size);
 	return packet_size;
 }
 EXPORT_SYMBOL_GPL(em28xx_isoc_dvb_max_packetsize);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 7904ca4b691..e5916dee409 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -1,7 +1,7 @@
 /*
  DVB device driver for em28xx
 
- (c) 2008 Mauro Carvalho Chehab <mchehab@infradead.org>
+ (c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org>
 
  (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
 	- Fixes for the driver to properly work with HVR-950
@@ -40,6 +40,8 @@
 #include "s921.h"
 #include "drxd.h"
 #include "cxd2820r.h"
+#include "tda18271c2dd.h"
+#include "drxk.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -73,6 +75,11 @@ struct em28xx_dvb {
 	struct dmx_frontend        fe_hw;
 	struct dmx_frontend        fe_mem;
 	struct dvb_net             net;
+
+	/* Due to DRX-K - probably need changes */
+	int (*gate_ctrl)(struct dvb_frontend *, int);
+	struct semaphore      pll_mutex;
+	bool			dont_attach_fe1;
 };
 
 
@@ -160,6 +167,11 @@ static int start_streaming(struct em28xx_dvb *dvb)
 		return rc;
 
 	max_dvb_packet_size = em28xx_isoc_dvb_max_packetsize(dev);
+	if (max_dvb_packet_size < 0)
+		return max_dvb_packet_size;
+	dprintk(1, "Using %d buffers each with %d bytes\n",
+		EM28XX_DVB_NUM_BUFS,
+		max_dvb_packet_size);
 
 	return em28xx_init_isoc(dev, EM28XX_DVB_MAX_PACKETS,
 				EM28XX_DVB_NUM_BUFS, max_dvb_packet_size,
@@ -295,6 +307,79 @@ static struct drxd_config em28xx_drxd = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+struct drxk_config terratec_h5_drxk = {
+	.adr = 0x29,
+	.single_master = 1,
+	.no_i2c_bridge = 1,
+	.microcode_name = "dvb-usb-terratec-h5-drxk.fw",
+};
+
+static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct em28xx_dvb *dvb = fe->sec_priv;
+	int status;
+
+	if (!dvb)
+		return -EINVAL;
+
+	if (enable) {
+		down(&dvb->pll_mutex);
+		status = dvb->gate_ctrl(fe, 1);
+	} else {
+		status = dvb->gate_ctrl(fe, 0);
+		up(&dvb->pll_mutex);
+	}
+	return status;
+}
+
+static void terratec_h5_init(struct em28xx *dev)
+{
+	int i;
+	struct em28xx_reg_seq terratec_h5_init[] = {
+		{EM28XX_R08_GPIO,	0xff,	0xff,	10},
+		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+		{EM2874_R80_GPIO,	0xf2,	0xff,	50},
+		{EM2874_R80_GPIO,	0xf6,	0xff,	100},
+		{ -1,                   -1,     -1,     -1},
+	};
+	struct em28xx_reg_seq terratec_h5_end[] = {
+		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+		{EM2874_R80_GPIO,	0xa6,	0xff,	50},
+		{EM2874_R80_GPIO,	0xe6,	0xff,	100},
+		{ -1,                   -1,     -1,     -1},
+	};
+	struct {
+		unsigned char r[4];
+		int len;
+	} regs[] = {
+		{{ 0x06, 0x02, 0x00, 0x31 }, 4},
+		{{ 0x01, 0x02 }, 2},
+		{{ 0x01, 0x02, 0x00, 0xc6 }, 4},
+		{{ 0x01, 0x00 }, 2},
+		{{ 0x01, 0x00, 0xff, 0xaf }, 4},
+		{{ 0x01, 0x00, 0x03, 0xa0 }, 4},
+		{{ 0x01, 0x00 }, 2},
+		{{ 0x01, 0x00, 0x73, 0xaf }, 4},
+		{{ 0x04, 0x00 }, 2},
+		{{ 0x00, 0x04 }, 2},
+		{{ 0x00, 0x04, 0x00, 0x0a }, 4},
+		{{ 0x04, 0x14 }, 2},
+		{{ 0x04, 0x14, 0x00, 0x00 }, 4},
+	};
+
+	em28xx_gpio_set(dev, terratec_h5_init);
+	em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+	msleep(10);
+	em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45);
+	msleep(10);
+
+	dev->i2c_client.addr = 0x82 >> 1;
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++)
+		i2c_master_send(&dev->i2c_client, regs[i].r, regs[i].len);
+	em28xx_gpio_set(dev, terratec_h5_end);
+};
+
 static int mt352_terratec_xs_init(struct dvb_frontend *fe)
 {
 	/* Values extracted from a USB trace of the Terratec Windows driver */
@@ -516,7 +601,7 @@ static void unregister_dvb(struct em28xx_dvb *dvb)
 	if (dvb->fe[1])
 		dvb_unregister_frontend(dvb->fe[1]);
 	dvb_unregister_frontend(dvb->fe[0]);
-	if (dvb->fe[1])
+	if (dvb->fe[1] && !dvb->dont_attach_fe1)
 		dvb_frontend_detach(dvb->fe[1]);
 	dvb_frontend_detach(dvb->fe[0]);
 	dvb_unregister_adapter(&dvb->adapter);
@@ -546,7 +631,7 @@ static int dvb_init(struct em28xx *dev)
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
-	case EM2874_LEADERSHIP_ISDBT:
+	case EM2874_BOARD_LEADERSHIP_ISDBT:
 		dvb->fe[0] = dvb_attach(s921_attach,
 				&sharp_isdbt, &dev->i2c_adap);
 
@@ -689,6 +774,41 @@ static int dvb_init(struct em28xx *dev)
 			}
 		}
 		break;
+	case EM2884_BOARD_TERRATEC_H5:
+		terratec_h5_init(dev);
+
+		dvb->dont_attach_fe1 = 1;
+
+		dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, &dev->i2c_adap, &dvb->fe[1]);
+		if (!dvb->fe[0]) {
+			result = -EINVAL;
+			goto out_free;
+		}
+
+		/* FIXME: do we need a pll semaphore? */
+		dvb->fe[0]->sec_priv = dvb;
+		sema_init(&dvb->pll_mutex, 1);
+		dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl;
+		dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl;
+		dvb->fe[1]->id = 1;
+
+		/* Attach tda18271 to DVB-C frontend */
+		if (dvb->fe[0]->ops.i2c_gate_ctrl)
+			dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1);
+		if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], &dev->i2c_adap, 0x60)) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		if (dvb->fe[0]->ops.i2c_gate_ctrl)
+			dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0);
+
+		/* Hack - needed by drxk/tda18271c2dd */
+		dvb->fe[1]->tuner_priv = dvb->fe[0]->tuner_priv;
+		memcpy(&dvb->fe[1]->ops.tuner_ops,
+		       &dvb->fe[0]->ops.tuner_ops,
+		       sizeof(dvb->fe[0]->ops.tuner_ops));
+
+		break;
 	default:
 		em28xx_errdev("/2: The frontend of your DVB/ATSC card"
 				" isn't supported yet\n");
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 4739fc7e6eb..36f5a9bc8b7 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -181,16 +181,25 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
 
 /*
  * em28xx_i2c_send_bytes()
- * untested for more than 4 bytes
  */
 static int em28xx_i2c_send_bytes(void *data, unsigned char addr, char *buf,
 				 short len, int stop)
 {
 	int wrcount = 0;
 	struct em28xx *dev = (struct em28xx *)data;
+	int write_timeout, ret;
 
 	wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
 
+	/* Seems to be required after a write */
+	for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
+	     write_timeout -= 5) {
+		ret = dev->em28xx_read_reg(dev, 0x05);
+		if (!ret)
+			break;
+		msleep(5);
+	}
+
 	return wrcount;
 }
 
@@ -218,9 +227,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, unsigned char addr,
  */
 static int em28xx_i2c_check_for_device(struct em28xx *dev, unsigned char addr)
 {
-	char msg;
 	int ret;
-	msg = addr;
 
 	ret = dev->em28xx_read_reg_req(dev, 2, addr);
 	if (ret < 0) {
@@ -332,7 +339,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
 	struct em28xx_eeprom *em_eeprom = (void *)eedata;
 	int i, err, size = len, block;
 
-	if (dev->chip_id == CHIP_ID_EM2874 || dev->chip_id == CHIP_ID_EM28174) {
+	if (dev->chip_id == CHIP_ID_EM2874 ||
+	    dev->chip_id == CHIP_ID_EM28174 ||
+	    dev->chip_id == CHIP_ID_EM2884) {
 		/* Empia switched to a 16-bit addressable eeprom in newer
 		   devices.  While we could certainly write a routine to read
 		   the eeprom, there is nothing of use in there that cannot be
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index ba1ba8648c8..5d12b14282e 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -372,6 +372,7 @@ int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
 		ir->get_key = default_polling_getkey;
 		break;
 	case CHIP_ID_EM2874:
+	case CHIP_ID_EM28174:
 		ir->get_key = em2874_polling_getkey;
 		em28xx_write_regs(dev, EM2874_R50_IR_CONFIG, &ir_config, 1);
 		break;
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index e92a28ede43..66f792361b9 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -201,6 +201,7 @@ enum em28xx_chip_id {
 	CHIP_ID_EM2870 = 35,
 	CHIP_ID_EM2883 = 36,
 	CHIP_ID_EM2874 = 65,
+	CHIP_ID_EM2884 = 68,
 	CHIP_ID_EM28174 = 113,
 };
 
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 7b6461d2d1f..d176dc0394e 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -32,7 +32,6 @@
 #include <linux/bitmap.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
@@ -50,7 +49,8 @@
 		      "Sascha Sommer <saschasommer@freenet.de>"
 
 #define DRIVER_DESC         "Empia em28xx based USB video device driver"
-#define EM28XX_VERSION_CODE  KERNEL_VERSION(0, 1, 2)
+
+#define EM28XX_VERSION "0.1.3"
 
 #define em28xx_videodbg(fmt, arg...) do {\
 	if (video_debug) \
@@ -72,6 +72,7 @@ do {\
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(EM28XX_VERSION);
 
 static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 static unsigned int vbi_nr[]   = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
@@ -1757,8 +1758,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = EM28XX_VERSION_CODE;
-
 	cap->capabilities =
 			V4L2_CAP_SLICED_VBI_CAPTURE |
 			V4L2_CAP_VIDEO_CAPTURE |
@@ -1976,7 +1975,6 @@ static int radio_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
 
-	cap->version = EM28XX_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
@@ -2450,10 +2448,8 @@ int em28xx_register_analog_devices(struct em28xx *dev)
       u8 val;
 	int ret;
 
-	printk(KERN_INFO "%s: v4l2 driver version %d.%d.%d\n",
-		dev->name,
-		(EM28XX_VERSION_CODE >> 16) & 0xff,
-		(EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff);
+	printk(KERN_INFO "%s: v4l2 driver version %s\n",
+		dev->name, EM28XX_VERSION);
 
 	/* set default norm */
 	dev->norm = em28xx_video_template.current_norm;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 3cca3312245..d80658bf3da 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -117,9 +117,9 @@
 #define EM2800_BOARD_VC211A			  74
 #define EM2882_BOARD_DIKOM_DK300		  75
 #define EM2870_BOARD_KWORLD_A340		  76
-#define EM2874_LEADERSHIP_ISDBT			  77
+#define EM2874_BOARD_LEADERSHIP_ISDBT		  77
 #define EM28174_BOARD_PCTV_290E                   78
-
+#define EM2884_BOARD_TERRATEC_H5		  79
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
@@ -487,6 +487,8 @@ struct em28xx {
 	int devno;		/* marks the number of this device */
 	enum em28xx_chip_id chip_id;
 
+	int audio_ifnum;
+
 	struct v4l2_device v4l2_dev;
 	struct em28xx_board board;
 
@@ -503,6 +505,7 @@ struct em28xx {
 
 	unsigned int has_audio_class:1;
 	unsigned int has_alsa_audio:1;
+	unsigned int is_audio_only:1;
 
 	/* Controls audio streaming */
 	struct work_struct wq_trigger;              /* Trigger to start/stop audio for alsa module */
@@ -697,6 +700,9 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
 void em28xx_release_resources(struct em28xx *dev);
 
 /* Provided by em28xx-input.c */
+
+#ifdef CONFIG_VIDEO_EM28XX_RC
+
 int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw);
 int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key,
@@ -709,6 +715,20 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev);
 int em28xx_ir_init(struct em28xx *dev);
 int em28xx_ir_fini(struct em28xx *dev);
 
+#else
+
+#define em28xx_get_key_terratec			NULL
+#define em28xx_get_key_em_haup			NULL
+#define em28xx_get_key_pinnacle_usb_grey	NULL
+#define em28xx_get_key_winfast_usbii_deluxe	NULL
+
+static inline void em28xx_register_snapshot_button(struct em28xx *dev) {}
+static inline void em28xx_deregister_snapshot_button(struct em28xx *dev) {}
+static inline int em28xx_ir_init(struct em28xx *dev) { return 0; }
+static inline int em28xx_ir_fini(struct em28xx *dev) { return 0; }
+
+#endif
+
 /* Provided by em28xx-vbi.c */
 extern struct videobuf_queue_ops em28xx_vbi_qops;
 
diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h
index bf66189cb26..14bb907d650 100644
--- a/drivers/media/video/et61x251/et61x251.h
+++ b/drivers/media/video/et61x251/et61x251.h
@@ -21,7 +21,6 @@
 #ifndef _ET61X251_H_
 #define _ET61X251_H_
 
-#include <linux/version.h>
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index a982750dcef..9a1e80a1e14 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
  ***************************************************************************/
 
+#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -48,8 +49,7 @@
 #define ET61X251_MODULE_AUTHOR  "(C) 2006-2007 Luca Risolia"
 #define ET61X251_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
 #define ET61X251_MODULE_LICENSE "GPL"
-#define ET61X251_MODULE_VERSION "1:1.09"
-#define ET61X251_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 9)
+#define ET61X251_MODULE_VERSION "1.1.10"
 
 /*****************************************************************************/
 
@@ -1579,7 +1579,7 @@ et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg)
 {
 	struct v4l2_capability cap = {
 		.driver = "et61x251",
-		.version = ET61X251_MODULE_VERSION_CODE,
+		.version = LINUX_VERSION_CODE,
 		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
 				V4L2_CAP_STREAMING,
 	};
@@ -2480,16 +2480,8 @@ static long et61x251_ioctl_v4l2(struct file *filp,
 	case VIDIOC_S_PARM:
 		return et61x251_vidioc_s_parm(cam, arg);
 
-	case VIDIOC_G_STD:
-	case VIDIOC_S_STD:
-	case VIDIOC_QUERYSTD:
-	case VIDIOC_ENUMSTD:
-	case VIDIOC_QUERYMENU:
-	case VIDIOC_ENUM_FRAMEINTERVALS:
-		return -EINVAL;
-
 	default:
-		return -EINVAL;
+		return -ENOTTY;
 
 	}
 }
diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
index 908d7012c3f..27cb197d0bd 100644
--- a/drivers/media/video/fsl-viu.c
+++ b/drivers/media/video/fsl-viu.c
@@ -23,19 +23,13 @@
 #include <linux/io.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf-dma-contig.h>
 
 #define DRV_NAME		"fsl_viu"
-#define VIU_MAJOR_VERSION	0
-#define VIU_MINOR_VERSION	5
-#define VIU_RELEASE		0
-#define VIU_VERSION		KERNEL_VERSION(VIU_MAJOR_VERSION, \
-					       VIU_MINOR_VERSION, \
-					       VIU_RELEASE)
+#define VIU_VERSION		"0.5.1"
 
 #define BUFFER_TIMEOUT		msecs_to_jiffies(500)  /* 0.5 seconds */
 
@@ -610,7 +604,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 {
 	strcpy(cap->driver, "viu");
 	strcpy(cap->card, "viu");
-	cap->version = VIU_VERSION;
 	cap->capabilities =	V4L2_CAP_VIDEO_CAPTURE |
 				V4L2_CAP_STREAMING     |
 				V4L2_CAP_VIDEO_OVERLAY |
@@ -1684,3 +1677,4 @@ module_exit(viu_exit);
 MODULE_DESCRIPTION("Freescale Video-In(VIU)");
 MODULE_AUTHOR("Hongjun Chen");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(VIU_VERSION);
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 34ae2c29979..43d9a20caeb 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -179,6 +179,16 @@ config USB_GSPCA_PAC7311
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_pac7311.
 
+config USB_GSPCA_SE401
+	tristate "SE401 USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	 Say Y here if you want support for cameras based on the
+	 Endpoints (formerly known as AOX) se401 chip.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called gspca_se401.
+
 config USB_GSPCA_SN9C2028
 	tristate "SONIX Dual-Mode USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 802fbe1bff4..d6364a86333 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_OV534_9)  += gspca_ov534_9.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7302)  += gspca_pac7302.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SE401)    += gspca_se401.o
 obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o
 obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
@@ -58,6 +59,7 @@ gspca_ov534_9-objs  := ov534_9.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7302-objs  := pac7302.o
 gspca_pac7311-objs  := pac7311.o
+gspca_se401-objs    := se401.o
 gspca_sn9c2028-objs := sn9c2028.o
 gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h
index 49ad4acbf60..0330a0293b9 100644
--- a/drivers/media/video/gspca/gl860/gl860.h
+++ b/drivers/media/video/gspca/gl860/gl860.h
@@ -18,7 +18,6 @@
  */
 #ifndef GL860_DEV_H
 #define GL860_DEV_H
-#include <linux/version.h>
 
 #include "gspca.h"
 
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 08ce9948d99..5da4879f47f 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -24,7 +24,6 @@
 #define MODULE_NAME "gspca"
 
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
@@ -51,11 +50,12 @@
 #error "DEF_NURBS too big"
 #endif
 
+#define DRIVER_VERSION_NUMBER	"2.13.0"
+
 MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
-
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 13, 0)
+MODULE_VERSION(DRIVER_VERSION_NUMBER);
 
 #ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
@@ -443,8 +443,11 @@ void gspca_frame_add(struct gspca_dev *gspca_dev,
 	} else {
 		switch (gspca_dev->last_packet_type) {
 		case DISCARD_PACKET:
-			if (packet_type == LAST_PACKET)
+			if (packet_type == LAST_PACKET) {
 				gspca_dev->last_packet_type = packet_type;
+				gspca_dev->image = NULL;
+				gspca_dev->image_len = 0;
+			}
 			return;
 		case LAST_PACKET:
 			return;
@@ -1278,10 +1281,10 @@ static int vidioc_querycap(struct file *file, void  *priv,
 		ret = -ENODEV;
 		goto out;
 	}
-	strncpy((char *) cap->driver, gspca_dev->sd_desc->name,
+	strlcpy((char *) cap->driver, gspca_dev->sd_desc->name,
 			sizeof cap->driver);
 	if (gspca_dev->dev->product != NULL) {
-		strncpy((char *) cap->card, gspca_dev->dev->product,
+		strlcpy((char *) cap->card, gspca_dev->dev->product,
 			sizeof cap->card);
 	} else {
 		snprintf((char *) cap->card, sizeof cap->card,
@@ -1291,7 +1294,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	}
 	usb_make_path(gspca_dev->dev, (char *) cap->bus_info,
 			sizeof(cap->bus_info));
-	cap->version = DRIVER_VERSION_NUMBER;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
 			  | V4L2_CAP_READWRITE;
@@ -1460,7 +1462,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
 		return -EINVAL;
 	input->type = V4L2_INPUT_TYPE_CAMERA;
 	input->status = gspca_dev->cam.input_flags;
-	strncpy(input->name, gspca_dev->sd_desc->name,
+	strlcpy(input->name, gspca_dev->sd_desc->name,
 		sizeof input->name);
 	return 0;
 }
@@ -2478,10 +2480,7 @@ EXPORT_SYMBOL(gspca_auto_gain_n_exposure);
 /* -- module insert / remove -- */
 static int __init gspca_init(void)
 {
-	info("v%d.%d.%d registered",
-		(DRIVER_VERSION_NUMBER >> 16) & 0xff,
-		(DRIVER_VERSION_NUMBER >> 8) & 0xff,
-		DRIVER_VERSION_NUMBER & 0xff);
+	info("v" DRIVER_VERSION_NUMBER " registered");
 	return 0;
 }
 static void __exit gspca_exit(void)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 057e287b915..0800433b209 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -134,6 +134,7 @@ enum sensors {
 	SEN_OV7670,
 	SEN_OV76BE,
 	SEN_OV8610,
+	SEN_OV9600,
 };
 
 /* Note this is a bit of a hack, but the w9968cf driver needs the code for all
@@ -340,6 +341,10 @@ static const unsigned ctrl_dis[] = {
 			(1 << EXPOSURE) |
 			(1 << AUTOGAIN) |
 			(1 << FREQ),
+[SEN_OV9600] =		((1 << NCTRL) - 1)	/* no control */
+			^ ((1 << EXPOSURE)	/* but exposure */
+			 | (1 << AUTOGAIN)),	/* and autogain */
+
 };
 
 static const struct v4l2_pix_format ov519_vga_mode[] = {
@@ -525,6 +530,17 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
+static const struct v4l2_pix_format ovfx2_ov9600_mode[] = {
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 1024,
+		.colorspace = V4L2_COLORSPACE_SRGB},
+};
 
 /* Registers common to OV511 / OV518 */
 #define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
@@ -1807,6 +1823,22 @@ static const struct ov_i2c_regvals norm_7660[] = {
 			| OV7670_COM8_AEC},
 	{0xa1, 0xc8}
 };
+static const struct ov_i2c_regvals norm_9600[] = {
+	{0x12, 0x80},
+	{0x0c, 0x28},
+	{0x11, 0x80},
+	{0x13, 0xb5},
+	{0x14, 0x3e},
+	{0x1b, 0x04},
+	{0x24, 0xb0},
+	{0x25, 0x90},
+	{0x26, 0x94},
+	{0x35, 0x90},
+	{0x37, 0x07},
+	{0x38, 0x08},
+	{0x01, 0x8e},
+	{0x02, 0x85}
+};
 
 /* 7670. Defaults taken from OmniVision provided data,
 *  as provided by Jonathan Corbet of OLPC		*/
@@ -2400,9 +2432,12 @@ static int ov518_i2c_r(struct sd *sd, u8 reg)
 
 	/* Initiate 2-byte write cycle */
 	reg_w(sd, R518_I2C_CTL, 0x03);
+	reg_r8(sd, R518_I2C_CTL);
 
 	/* Initiate 2-byte read cycle */
 	reg_w(sd, R518_I2C_CTL, 0x05);
+	reg_r8(sd, R518_I2C_CTL);
+
 	value = reg_r(sd, R51x_I2C_DATA);
 	PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value);
 	return value;
@@ -2686,7 +2721,7 @@ static void write_i2c_regvals(struct sd *sd,
  *
  ***************************************************************************/
 
-/* This initializes the OV2x10 / OV3610 / OV3620 */
+/* This initializes the OV2x10 / OV3610 / OV3620 / OV9600 */
 static void ov_hires_configure(struct sd *sd)
 {
 	int high, low;
@@ -2702,19 +2737,32 @@ static void ov_hires_configure(struct sd *sd)
 	high = i2c_r(sd, 0x0a);
 	low = i2c_r(sd, 0x0b);
 	/* info("%x, %x", high, low); */
-	if (high == 0x96 && low == 0x40) {
-		PDEBUG(D_PROBE, "Sensor is an OV2610");
-		sd->sensor = SEN_OV2610;
-	} else if (high == 0x96 && low == 0x41) {
-		PDEBUG(D_PROBE, "Sensor is an OV2610AE");
-		sd->sensor = SEN_OV2610AE;
-	} else if (high == 0x36 && (low & 0x0f) == 0x00) {
-		PDEBUG(D_PROBE, "Sensor is an OV3610");
-		sd->sensor = SEN_OV3610;
-	} else {
-		err("Error unknown sensor type: %02x%02x",
-			high, low);
+	switch (high) {
+	case 0x96:
+		switch (low) {
+		case 0x40:
+			PDEBUG(D_PROBE, "Sensor is a OV2610");
+			sd->sensor = SEN_OV2610;
+			return;
+		case 0x41:
+			PDEBUG(D_PROBE, "Sensor is a OV2610AE");
+			sd->sensor = SEN_OV2610AE;
+			return;
+		case 0xb1:
+			PDEBUG(D_PROBE, "Sensor is a OV9600");
+			sd->sensor = SEN_OV9600;
+			return;
+		}
+		break;
+	case 0x36:
+		if ((low & 0x0f) == 0x00) {
+			PDEBUG(D_PROBE, "Sensor is a OV3610");
+			sd->sensor = SEN_OV3610;
+			return;
+		}
+		break;
 	}
+	err("Error unknown sensor type: %02x%02x", high, low);
 }
 
 /* This initializes the OV8110, OV8610 sensor. The OV8110 uses
@@ -3400,6 +3448,10 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			cam->cam_mode = ovfx2_ov3610_mode;
 			cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
 			break;
+		case SEN_OV9600:
+			cam->cam_mode = ovfx2_ov9600_mode;
+			cam->nmodes = ARRAY_SIZE(ovfx2_ov9600_mode);
+			break;
 		default:
 			if (sd->sif) {
 				cam->cam_mode = ov519_sif_mode;
@@ -3497,6 +3549,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	case SEN_OV8610:
 		write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610));
 		break;
+	case SEN_OV9600:
+		write_i2c_regvals(sd, norm_9600, ARRAY_SIZE(norm_9600));
+
+		/* enable autoexpo */
+/*		i2c_w_mask(sd, 0x13, 0x05, 0x05); */
+		break;
 	}
 	return gspca_dev->usb_err;
 error:
@@ -4085,6 +4143,33 @@ static void mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
 		i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
 		break;
+	case SEN_OV9600: {
+		const struct ov_i2c_regvals *vals;
+		static const struct ov_i2c_regvals sxga_15[] = {
+			{0x11, 0x80}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75}
+		};
+		static const struct ov_i2c_regvals sxga_7_5[] = {
+			{0x11, 0x81}, {0x14, 0x3e}, {0x24, 0x85}, {0x25, 0x75}
+		};
+		static const struct ov_i2c_regvals vga_30[] = {
+			{0x11, 0x81}, {0x14, 0x7e}, {0x24, 0x70}, {0x25, 0x60}
+		};
+		static const struct ov_i2c_regvals vga_15[] = {
+			{0x11, 0x83}, {0x14, 0x3e}, {0x24, 0x80}, {0x25, 0x70}
+		};
+
+		/* frame rates:
+		 *	15fps / 7.5 fps for 1280x1024
+		 *	30fps / 15fps for 640x480
+		 */
+		i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0x40);
+		if (qvga)
+			vals = sd->frame_rate < 30 ? vga_15 : vga_30;
+		else
+			vals = sd->frame_rate < 15 ? sxga_7_5 : sxga_15;
+		write_i2c_regvals(sd, vals, ARRAY_SIZE(sxga_15));
+		return;
+	    }
 	default:
 		return;
 	}
@@ -4120,6 +4205,7 @@ static void set_ov_sensor_window(struct sd *sd)
 	case SEN_OV2610AE:
 	case SEN_OV3610:
 	case SEN_OV7670:
+	case SEN_OV9600:
 		mode_init_ov_sensor_regs(sd);
 		return;
 	case SEN_OV7660:
@@ -4920,7 +5006,8 @@ static const struct sd_desc sd_desc = {
 static const struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF },
 	{USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
-	{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
+	{USB_DEVICE(0x041e, 0x405f),
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4064),
diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/video/gspca/se401.c
new file mode 100644
index 00000000000..4c283c24c75
--- /dev/null
+++ b/drivers/media/video/gspca/se401.c
@@ -0,0 +1,774 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define MODULE_NAME "se401"
+
+#define BULK_SIZE 4096
+#define PACKET_SIZE 1024
+#define READ_REQ_SIZE 64
+#define MAX_MODES ((READ_REQ_SIZE - 6) / 4)
+/* The se401 compression algorithm uses a fixed quant factor, which
+   can be configured by setting the high nibble of the SE401_OPERATINGMODE
+   feature. This needs to exactly match what is in libv4l! */
+#define SE401_QUANT_FACT 8
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "gspca.h"
+#include "se401.h"
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Endpoints se401");
+MODULE_LICENSE("GPL");
+
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	GAIN,
+	EXPOSURE,
+	FREQ,
+	NCTRL	/* number of controls */
+};
+
+/* exposure change state machine states */
+enum {
+	EXPO_CHANGED,
+	EXPO_DROP_FRAME,
+	EXPO_NO_CHANGE,
+};
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+	struct gspca_ctrl ctrls[NCTRL];
+	struct v4l2_pix_format fmts[MAX_MODES];
+	int pixels_read;
+	int packet_read;
+	u8 packet[PACKET_SIZE];
+	u8 restart_stream;
+	u8 button_state;
+	u8 resetlevel;
+	u8 resetlevel_frame_count;
+	int resetlevel_adjust_dir;
+	int expo_change_state;
+};
+
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setgain(struct gspca_dev *gspca_dev);
+static void setexposure(struct gspca_dev *gspca_dev);
+
+static const struct ctrl sd_ctrls[NCTRL] = {
+[BRIGHTNESS] = {
+		{
+			.id      = V4L2_CID_BRIGHTNESS,
+			.type    = V4L2_CTRL_TYPE_INTEGER,
+			.name    = "Brightness",
+			.minimum = 0,
+			.maximum = 255,
+			.step    = 1,
+			.default_value = 15,
+		},
+		.set_control = setbrightness
+	},
+[GAIN] = {
+		{
+			.id      = V4L2_CID_GAIN,
+			.type    = V4L2_CTRL_TYPE_INTEGER,
+			.name    = "Gain",
+			.minimum = 0,
+			.maximum = 50, /* Really 63 but > 50 is not pretty */
+			.step    = 1,
+			.default_value = 25,
+		},
+		.set_control = setgain
+	},
+[EXPOSURE] = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "Exposure",
+			.minimum = 0,
+			.maximum = 32767,
+			.step = 1,
+			.default_value = 15000,
+		},
+		.set_control = setexposure
+	},
+[FREQ] = {
+		{
+			.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+			.type    = V4L2_CTRL_TYPE_MENU,
+			.name    = "Light frequency filter",
+			.minimum = 0,
+			.maximum = 2,
+			.step    = 1,
+			.default_value = 0,
+		},
+		.set_control = setexposure
+	},
+};
+
+static void se401_write_req(struct gspca_dev *gspca_dev, u16 req, u16 value,
+			    int silent)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0), req,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      value, 0, NULL, 0, 1000);
+	if (err < 0) {
+		if (!silent)
+			err("write req failed req %#04x val %#04x error %d",
+			    req, value, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	if (USB_BUF_SZ < READ_REQ_SIZE) {
+		err("USB_BUF_SZ too small!!");
+		gspca_dev->usb_err = -ENOBUFS;
+		return;
+	}
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0), req,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000);
+	if (err < 0) {
+		if (!silent)
+			err("read req failed req %#04x error %d", req, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static void se401_set_feature(struct gspca_dev *gspca_dev,
+			      u16 selector, u16 param)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      SE401_REQ_SET_EXT_FEATURE,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      param, selector, NULL, 0, 1000);
+	if (err < 0) {
+		err("set feature failed sel %#04x param %#04x error %d",
+		    selector, param, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static int se401_get_feature(struct gspca_dev *gspca_dev, u16 selector)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return gspca_dev->usb_err;
+
+	if (USB_BUF_SZ < 2) {
+		err("USB_BUF_SZ too small!!");
+		gspca_dev->usb_err = -ENOBUFS;
+		return gspca_dev->usb_err;
+	}
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0),
+			      SE401_REQ_GET_EXT_FEATURE,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, selector, gspca_dev->usb_buf, 2, 1000);
+	if (err < 0) {
+		err("get feature failed sel %#04x error %d", selector, err);
+		gspca_dev->usb_err = err;
+		return err;
+	}
+	return gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8);
+}
+
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS))
+		return;
+
+	/* HDG: this does not seem to do anything on my cam */
+	se401_write_req(gspca_dev, SE401_REQ_SET_BRT,
+			sd->ctrls[BRIGHTNESS].val, 0);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u16 gain = 63 - sd->ctrls[GAIN].val;
+
+	/* red color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_ARCG, gain);
+	/* green color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_AGCG, gain);
+	/* blue color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_ABCG, gain);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int integration = sd->ctrls[EXPOSURE].val << 6;
+	u8 expose_h, expose_m, expose_l;
+
+	/* Do this before the set_feature calls, for proper timing wrt
+	   the interrupt driven pkt_scan. Note we may still race but that
+	   is not a big issue, the expo change state machine is merely for
+	   avoiding underexposed frames getting send out, if one sneaks
+	   through so be it */
+	sd->expo_change_state = EXPO_CHANGED;
+
+	if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
+		integration = integration - integration % 106667;
+	if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ)
+		integration = integration - integration % 88889;
+
+	expose_h = (integration >> 16);
+	expose_m = (integration >> 8);
+	expose_l = integration;
+
+	/* integration time low */
+	se401_set_feature(gspca_dev, HV7131_REG_TITL, expose_l);
+	/* integration time mid */
+	se401_set_feature(gspca_dev, HV7131_REG_TITM, expose_m);
+	/* integration time high */
+	se401_set_feature(gspca_dev, HV7131_REG_TITU, expose_h);
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+	u8 *cd = gspca_dev->usb_buf;
+	int i, j, n;
+	int widths[MAX_MODES], heights[MAX_MODES];
+
+	/* Read the camera descriptor */
+	se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 1);
+	if (gspca_dev->usb_err) {
+		/* Sometimes after being idle for a while the se401 won't
+		   respond and needs a good kicking  */
+		usb_reset_device(gspca_dev->dev);
+		gspca_dev->usb_err = 0;
+		se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0);
+	}
+
+	/* Some cameras start with their LED on */
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+	if (gspca_dev->usb_err)
+		return gspca_dev->usb_err;
+
+	if (cd[1] != 0x41) {
+		err("Wrong descriptor type");
+		return -ENODEV;
+	}
+
+	if (!(cd[2] & SE401_FORMAT_BAYER)) {
+		err("Bayer format not supported!");
+		return -ENODEV;
+	}
+
+	if (cd[3])
+		info("ExtraFeatures: %d", cd[3]);
+
+	n = cd[4] | (cd[5] << 8);
+	if (n > MAX_MODES) {
+		err("Too many frame sizes");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < n ; i++) {
+		widths[i] = cd[6 + i * 4 + 0] | (cd[6 + i * 4 + 1] << 8);
+		heights[i] = cd[6 + i * 4 + 2] | (cd[6 + i * 4 + 3] << 8);
+	}
+
+	for (i = 0; i < n ; i++) {
+		sd->fmts[i].width = widths[i];
+		sd->fmts[i].height = heights[i];
+		sd->fmts[i].field = V4L2_FIELD_NONE;
+		sd->fmts[i].colorspace = V4L2_COLORSPACE_SRGB;
+		sd->fmts[i].priv = 1;
+
+		/* janggu compression only works for 1/4th or 1/16th res */
+		for (j = 0; j < n; j++) {
+			if (widths[j] / 2 == widths[i] &&
+			    heights[j] / 2 == heights[i]) {
+				sd->fmts[i].priv = 2;
+				break;
+			}
+		}
+		/* 1/16th if available too is better then 1/4th, because
+		   we then use a larger area of the sensor */
+		for (j = 0; j < n; j++) {
+			if (widths[j] / 4 == widths[i] &&
+			    heights[j] / 4 == heights[i]) {
+				sd->fmts[i].priv = 4;
+				break;
+			}
+		}
+
+		if (sd->fmts[i].priv == 1) {
+			/* Not a 1/4th or 1/16th res, use bayer */
+			sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8;
+			sd->fmts[i].bytesperline = widths[i];
+			sd->fmts[i].sizeimage = widths[i] * heights[i];
+			info("Frame size: %dx%d bayer", widths[i], heights[i]);
+		} else {
+			/* Found a match use janggu compression */
+			sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401;
+			sd->fmts[i].bytesperline = 0;
+			sd->fmts[i].sizeimage = widths[i] * heights[i] * 3;
+			info("Frame size: %dx%d 1/%dth janggu",
+			     widths[i], heights[i],
+			     sd->fmts[i].priv * sd->fmts[i].priv);
+		}
+	}
+
+	cam->cam_mode = sd->fmts;
+	cam->nmodes = n;
+	cam->bulk = 1;
+	cam->bulk_size = BULK_SIZE;
+	cam->bulk_nurbs = 4;
+	cam->ctrls = sd->ctrls;
+	gspca_dev->nbalt = 1;  /* Ignore the bogus isoc alt settings */
+	sd->resetlevel = 0x2d; /* Set initial resetlevel */
+
+	/* See if the camera supports brightness */
+	se401_read_req(gspca_dev, SE401_REQ_GET_BRT, 1);
+	if (gspca_dev->usb_err) {
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS);
+		gspca_dev->usb_err = 0;
+	}
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+	int mode = 0;
+
+	se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 1);
+	if (gspca_dev->usb_err) {
+		/* Sometimes after being idle for a while the se401 won't
+		   respond and needs a good kicking  */
+		usb_reset_device(gspca_dev->dev);
+		gspca_dev->usb_err = 0;
+		se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 0);
+	}
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 1, 0);
+
+	se401_set_feature(gspca_dev, HV7131_REG_MODE_B, 0x05);
+
+	/* set size + mode */
+	se401_write_req(gspca_dev, SE401_REQ_SET_WIDTH,
+			gspca_dev->width * mult, 0);
+	se401_write_req(gspca_dev, SE401_REQ_SET_HEIGHT,
+			gspca_dev->height * mult, 0);
+	/*
+	 * HDG: disabled this as it does not seem to do anything
+	 * se401_write_req(gspca_dev, SE401_REQ_SET_OUTPUT_MODE,
+	 *		   SE401_FORMAT_BAYER, 0);
+	 */
+
+	switch (mult) {
+	case 1: /* Raw bayer */
+		mode = 0x03; break;
+	case 2: /* 1/4th janggu */
+		mode = SE401_QUANT_FACT << 4; break;
+	case 4: /* 1/16th janggu */
+		mode = (SE401_QUANT_FACT << 4) | 0x02; break;
+	}
+	se401_set_feature(gspca_dev, SE401_OPERATINGMODE, mode);
+
+	setbrightness(gspca_dev);
+	setgain(gspca_dev);
+	setexposure(gspca_dev);
+	se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+
+	sd->packet_read = 0;
+	sd->pixels_read = 0;
+	sd->restart_stream = 0;
+	sd->resetlevel_frame_count = 0;
+	sd->resetlevel_adjust_dir = 0;
+	sd->expo_change_state = EXPO_NO_CHANGE;
+
+	se401_write_req(gspca_dev, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, 0);
+
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	se401_write_req(gspca_dev, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, 0);
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+	se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 0, 0);
+}
+
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	unsigned int ahrc, alrc;
+	int oldreset, adjust_dir;
+
+	/* Restart the stream if requested do so by pkt_scan */
+	if (sd->restart_stream) {
+		sd_stopN(gspca_dev);
+		sd_start(gspca_dev);
+		sd->restart_stream = 0;
+	}
+
+	/* Automatically adjust sensor reset level
+	   Hyundai have some really nice docs about this and other sensor
+	   related stuff on their homepage: www.hei.co.kr */
+	sd->resetlevel_frame_count++;
+	if (sd->resetlevel_frame_count < 20)
+		return;
+
+	/* For some reason this normally read-only register doesn't get reset
+	   to zero after reading them just once... */
+	se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH);
+	se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+	se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH);
+	se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+	ahrc = 256*se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH) +
+	    se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+	alrc = 256*se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH) +
+	    se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+
+	/* Not an exact science, but it seems to work pretty well... */
+	oldreset = sd->resetlevel;
+	if (alrc > 10) {
+		while (alrc >= 10 && sd->resetlevel < 63) {
+			sd->resetlevel++;
+			alrc /= 2;
+		}
+	} else if (ahrc > 20) {
+		while (ahrc >= 20 && sd->resetlevel > 0) {
+			sd->resetlevel--;
+			ahrc /= 2;
+		}
+	}
+	/* Detect ping-pong-ing and halve adjustment to avoid overshoot */
+	if (sd->resetlevel > oldreset)
+		adjust_dir = 1;
+	else
+		adjust_dir = -1;
+	if (sd->resetlevel_adjust_dir &&
+	    sd->resetlevel_adjust_dir != adjust_dir)
+		sd->resetlevel = oldreset + (sd->resetlevel - oldreset) / 2;
+
+	if (sd->resetlevel != oldreset) {
+		sd->resetlevel_adjust_dir = adjust_dir;
+		se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+	}
+
+	sd->resetlevel_frame_count = 0;
+}
+
+static void sd_complete_frame(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	switch (sd->expo_change_state) {
+	case EXPO_CHANGED:
+		/* The exposure was changed while this frame
+		   was being send, so this frame is ok */
+		sd->expo_change_state = EXPO_DROP_FRAME;
+		break;
+	case EXPO_DROP_FRAME:
+		/* The exposure was changed while this frame
+		   was being captured, drop it! */
+		gspca_dev->last_packet_type = DISCARD_PACKET;
+		sd->expo_change_state = EXPO_NO_CHANGE;
+		break;
+	case EXPO_NO_CHANGE:
+		break;
+	}
+	gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+}
+
+static void sd_pkt_scan_janggu(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	int imagesize = gspca_dev->width * gspca_dev->height;
+	int i, plen, bits, pixels, info, count;
+
+	if (sd->restart_stream)
+		return;
+
+	/* Sometimes a 1024 bytes garbage bulk packet is send between frames */
+	if (gspca_dev->last_packet_type == LAST_PACKET && len == 1024) {
+		gspca_dev->last_packet_type = DISCARD_PACKET;
+		return;
+	}
+
+	i = 0;
+	while (i < len) {
+		/* Read header if not already be present from prev bulk pkt */
+		if (sd->packet_read < 4) {
+			count = 4 - sd->packet_read;
+			if (count > len - i)
+				count = len - i;
+			memcpy(&sd->packet[sd->packet_read], &data[i], count);
+			sd->packet_read += count;
+			i += count;
+			if (sd->packet_read < 4)
+				break;
+		}
+		bits   = sd->packet[3] + (sd->packet[2] << 8);
+		pixels = sd->packet[1] + ((sd->packet[0] & 0x3f) << 8);
+		info   = (sd->packet[0] & 0xc0) >> 6;
+		plen   = ((bits + 47) >> 4) << 1;
+		/* Sanity checks */
+		if (plen > 1024) {
+			err("invalid packet len %d restarting stream", plen);
+			goto error;
+		}
+		if (info == 3) {
+			err("unknown frame info value restarting stream");
+			goto error;
+		}
+
+		/* Read (remainder of) packet contents */
+		count = plen - sd->packet_read;
+		if (count > len - i)
+			count = len - i;
+		memcpy(&sd->packet[sd->packet_read], &data[i], count);
+		sd->packet_read += count;
+		i += count;
+		if (sd->packet_read < plen)
+			break;
+
+		sd->pixels_read += pixels;
+		sd->packet_read = 0;
+
+		switch (info) {
+		case 0: /* Frame data */
+			gspca_frame_add(gspca_dev, INTER_PACKET, sd->packet,
+					plen);
+			break;
+		case 1: /* EOF */
+			if (sd->pixels_read != imagesize) {
+				err("frame size %d expected %d",
+				    sd->pixels_read, imagesize);
+				goto error;
+			}
+			sd_complete_frame(gspca_dev, sd->packet, plen);
+			return; /* Discard the rest of the bulk packet !! */
+		case 2: /* SOF */
+			gspca_frame_add(gspca_dev, FIRST_PACKET, sd->packet,
+					plen);
+			sd->pixels_read = pixels;
+			break;
+		}
+	}
+	return;
+
+error:
+	sd->restart_stream = 1;
+	/* Give userspace a 0 bytes frame, so our dq callback gets
+	   called and it can restart the stream */
+	gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+	gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+}
+
+static void sd_pkt_scan_bayer(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct cam *cam = &gspca_dev->cam;
+	int imagesize = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+	if (gspca_dev->image_len == 0) {
+		gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+		return;
+	}
+
+	if (gspca_dev->image_len + len >= imagesize) {
+		sd_complete_frame(gspca_dev, data, len);
+		return;
+	}
+
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+
+	if (len == 0)
+		return;
+
+	if (mult == 1) /* mult == 1 means raw bayer */
+		sd_pkt_scan_bayer(gspca_dev, data, len);
+	else
+		sd_pkt_scan_janggu(gspca_dev, data, len);
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	u8 state;
+
+	if (len != 2)
+		return -EINVAL;
+
+	switch (data[0]) {
+	case 0:
+	case 1:
+		state = data[0];
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (sd->button_state != state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = state;
+	}
+
+	return 0;
+}
+#endif
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.dq_callback = sd_dq_callback,
+	.pkt_scan = sd_pkt_scan,
+	.querymenu = sd_querymenu,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.int_pkt_scan = sd_int_pkt_scan,
+#endif
+};
+
+/* -- module initialisation -- */
+static const struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x03e8, 0x0004)}, /* Endpoints/Aox SE401 */
+	{USB_DEVICE(0x0471, 0x030b)}, /* Philips PCVC665K */
+	{USB_DEVICE(0x047d, 0x5001)}, /* Kensington 67014 */
+	{USB_DEVICE(0x047d, 0x5002)}, /* Kensington 6701(5/7) */
+	{USB_DEVICE(0x047d, 0x5003)}, /* Kensington 67016 */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static int sd_pre_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int sd_post_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+	.pre_reset = sd_pre_reset,
+	.post_reset = sd_post_reset,
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	return usb_register(&sd_driver);
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/se401.h b/drivers/media/video/gspca/se401.h
new file mode 100644
index 00000000000..96d8ebf3cf5
--- /dev/null
+++ b/drivers/media/video/gspca/se401.h
@@ -0,0 +1,90 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define SE401_REQ_GET_CAMERA_DESCRIPTOR		0x06
+#define SE401_REQ_START_CONTINUOUS_CAPTURE	0x41
+#define SE401_REQ_STOP_CONTINUOUS_CAPTURE	0x42
+#define SE401_REQ_CAPTURE_FRAME			0x43
+#define SE401_REQ_GET_BRT			0x44
+#define SE401_REQ_SET_BRT			0x45
+#define SE401_REQ_GET_WIDTH			0x4c
+#define SE401_REQ_SET_WIDTH			0x4d
+#define SE401_REQ_GET_HEIGHT			0x4e
+#define SE401_REQ_SET_HEIGHT			0x4f
+#define SE401_REQ_GET_OUTPUT_MODE		0x50
+#define SE401_REQ_SET_OUTPUT_MODE		0x51
+#define SE401_REQ_GET_EXT_FEATURE		0x52
+#define SE401_REQ_SET_EXT_FEATURE		0x53
+#define SE401_REQ_CAMERA_POWER			0x56
+#define SE401_REQ_LED_CONTROL			0x57
+#define SE401_REQ_BIOS				0xff
+
+#define SE401_BIOS_READ				0x07
+
+#define SE401_FORMAT_BAYER	0x40
+
+/* Hyundai hv7131b registers
+   7121 and 7141 should be the same (haven't really checked...) */
+/* Mode registers: */
+#define HV7131_REG_MODE_A		0x00
+#define HV7131_REG_MODE_B		0x01
+#define HV7131_REG_MODE_C		0x02
+/* Frame registers: */
+#define HV7131_REG_FRSU		0x10
+#define HV7131_REG_FRSL		0x11
+#define HV7131_REG_FCSU		0x12
+#define HV7131_REG_FCSL		0x13
+#define HV7131_REG_FWHU		0x14
+#define HV7131_REG_FWHL		0x15
+#define HV7131_REG_FWWU		0x16
+#define HV7131_REG_FWWL		0x17
+/* Timing registers: */
+#define HV7131_REG_THBU		0x20
+#define HV7131_REG_THBL		0x21
+#define HV7131_REG_TVBU		0x22
+#define HV7131_REG_TVBL		0x23
+#define HV7131_REG_TITU		0x25
+#define HV7131_REG_TITM		0x26
+#define HV7131_REG_TITL		0x27
+#define HV7131_REG_TMCD		0x28
+/* Adjust Registers: */
+#define HV7131_REG_ARLV		0x30
+#define HV7131_REG_ARCG		0x31
+#define HV7131_REG_AGCG		0x32
+#define HV7131_REG_ABCG		0x33
+#define HV7131_REG_APBV		0x34
+#define HV7131_REG_ASLP		0x54
+/* Offset Registers: */
+#define HV7131_REG_OFSR		0x50
+#define HV7131_REG_OFSG		0x51
+#define HV7131_REG_OFSB		0x52
+/* REset level statistics registers: */
+#define HV7131_REG_LOREFNOH	0x57
+#define HV7131_REG_LOREFNOL	0x58
+#define HV7131_REG_HIREFNOH	0x59
+#define HV7131_REG_HIREFNOL	0x5a
+
+/* se401 registers */
+#define SE401_OPERATINGMODE	0x2000
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index b089c0d3ee9..6ec23290218 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -247,7 +247,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = {
 	{0x30, 0x0004, 0x000a},
 	{0xb0, 0x0001, 0x0000},
 
-
 	{0xa1, 0x0080, 0x0001},
 	{0x30, 0x0049, 0x0000},
 	{0x30, 0x0060, 0x0005},
@@ -256,8 +255,6 @@ static const struct cmd spca504A_clicksmart420_init_data[] = {
 	{0x00, 0x0000, 0x2000},
 	{0x00, 0x0013, 0x2301},
 	{0x00, 0x0003, 0x2000},
-	{0x00, 0x0000, 0x2000},
-
 };
 
 /* clicksmart 420 open data ? */
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 7e762d55109..d1d733b9359 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1387,7 +1387,7 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 		return 0;
 	case V4L2_CID_EFFECTS:
 		if ((unsigned) menu->index < ARRAY_SIZE(effects_control)) {
-			strncpy((char *) menu->name,
+			strlcpy((char *) menu->name,
 				effects_control[menu->index],
 				sizeof menu->name);
 			return 0;
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index 5f1db46beb4..441dacf642b 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -474,5 +474,6 @@ module_init(hdpvr_init);
 module_exit(hdpvr_exit);
 
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.2.1");
 MODULE_AUTHOR("Janne Grunau");
 MODULE_DESCRIPTION("Hauppauge HD PVR driver");
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 514aea76eaa..087f7c08cb8 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -17,7 +17,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 #include <linux/workqueue.h>
 
 #include <linux/videodev2.h>
@@ -574,7 +573,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strcpy(cap->driver, "hdpvr");
 	strcpy(cap->card, "Hauppauge HD PVR");
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
-	cap->version = HDPVR_VERSION;
 	cap->capabilities =     V4L2_CAP_VIDEO_CAPTURE |
 				V4L2_CAP_AUDIO         |
 				V4L2_CAP_READWRITE;
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index 072f23c570f..d6439db1d18 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -18,12 +18,6 @@
 #include <media/v4l2-device.h>
 #include <media/ir-kbd-i2c.h>
 
-#define HDPVR_MAJOR_VERSION 0
-#define HDPVR_MINOR_VERSION 2
-#define HDPVR_RELEASE 0
-#define HDPVR_VERSION \
-	KERNEL_VERSION(HDPVR_MAJOR_VERSION, HDPVR_MINOR_VERSION, HDPVR_RELEASE)
-
 #define HDPVR_MAX 8
 #define HDPVR_I2C_MAX_SIZE 128
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 84bdf0f42a8..8f9cc17b518 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -36,7 +36,6 @@
  *                using information provided by Jiun-Kuei Jung @ AVerMedia.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index a7f54b010a5..38f052257f4 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -722,8 +722,8 @@ unsigned int ivtv_v4l2_dec_poll(struct file *filp, poll_table *wait)
 
 	/* If there are subscribed events, then only use the new event
 	   API instead of the old video.h based API. */
-	if (!list_empty(&id->fh.events->subscribed)) {
-		poll_wait(filp, &id->fh.events->wait, wait);
+	if (!list_empty(&id->fh.subscribed)) {
+		poll_wait(filp, &id->fh.wait, wait);
 		/* Turn off the old-style vsync events */
 		clear_bit(IVTV_F_I_EV_VSYNC_ENABLED, &itv->i_flags);
 		if (v4l2_event_pending(&id->fh))
@@ -750,6 +750,7 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait)
 	struct ivtv *itv = id->itv;
 	struct ivtv_stream *s = &itv->streams[id->type];
 	int eof = test_bit(IVTV_F_S_STREAMOFF, &s->s_flags);
+	unsigned res = 0;
 
 	/* Start a capture if there is none */
 	if (!eof && !test_bit(IVTV_F_S_STREAMING, &s->s_flags)) {
@@ -769,12 +770,16 @@ unsigned int ivtv_v4l2_enc_poll(struct file *filp, poll_table * wait)
 	/* add stream's waitq to the poll list */
 	IVTV_DEBUG_HI_FILE("Encoder poll\n");
 	poll_wait(filp, &s->waitq, wait);
+	if (v4l2_event_pending(&id->fh))
+		res |= POLLPRI;
+	else
+		poll_wait(filp, &id->fh.wait, wait);
 
 	if (s->q_full.length || s->q_io.length)
-		return POLLIN | POLLRDNORM;
+		return res | POLLIN | POLLRDNORM;
 	if (eof)
-		return POLLHUP;
-	return 0;
+		return res | POLLHUP;
+	return res;
 }
 
 void ivtv_stop_capture(struct ivtv_open_id *id, int gop_end)
@@ -961,10 +966,6 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp)
 		return -ENOMEM;
 	}
 	v4l2_fh_init(&item->fh, s->vdev);
-	if (s->type == IVTV_DEC_STREAM_TYPE_YUV ||
-	    s->type == IVTV_DEC_STREAM_TYPE_MPG) {
-		res = v4l2_event_alloc(&item->fh, 60);
-	}
 	if (res < 0) {
 		v4l2_fh_exit(&item->fh);
 		kfree(item);
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 120c7d8e089..3e5c090af11 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -757,7 +757,6 @@ static int ivtv_querycap(struct file *file, void *fh, struct v4l2_capability *vc
 	strlcpy(vcap->driver, IVTV_DRIVER_NAME, sizeof(vcap->driver));
 	strlcpy(vcap->card, itv->card_name, sizeof(vcap->card));
 	snprintf(vcap->bus_info, sizeof(vcap->bus_info), "PCI:%s", pci_name(itv->pdev));
-	vcap->version = IVTV_DRIVER_VERSION; 	    /* version */
 	vcap->capabilities = itv->v4l2_cap; 	    /* capabilities */
 	return 0;
 }
@@ -1451,11 +1450,11 @@ static int ivtv_subscribe_event(struct v4l2_fh *fh, struct v4l2_event_subscripti
 	switch (sub->type) {
 	case V4L2_EVENT_VSYNC:
 	case V4L2_EVENT_EOS:
-		break;
+	case V4L2_EVENT_CTRL:
+		return v4l2_event_subscribe(fh, sub, 0);
 	default:
 		return -EINVAL;
 	}
-	return v4l2_event_subscribe(fh, sub);
 }
 
 static int ivtv_log_status(struct file *file, void *fh)
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index b67a4048f5a..a20f346fcad 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -21,11 +21,6 @@
 #define IVTV_VERSION_H
 
 #define IVTV_DRIVER_NAME "ivtv"
-#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 4
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 2
-
-#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
-#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
+#define IVTV_VERSION "1.4.3"
 
 #endif
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index a45d8f098e0..3248ac80571 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -18,7 +18,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 43c68f51c5c..fb8e4a7a9dd 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -18,7 +18,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/marvell-ccic/Kconfig b/drivers/media/video/marvell-ccic/Kconfig
new file mode 100644
index 00000000000..bf739e3b339
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/Kconfig
@@ -0,0 +1,23 @@
+config VIDEO_CAFE_CCIC
+	tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
+	depends on PCI && I2C && VIDEO_V4L2
+	select VIDEO_OV7670
+	select VIDEOBUF2_VMALLOC
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This is a video4linux2 driver for the Marvell 88ALP01 integrated
+	  CMOS camera controller.  This is the controller found on first-
+	  generation OLPC systems.
+
+config VIDEO_MMP_CAMERA
+	tristate "Marvell Armada 610 integrated camera controller support"
+	depends on ARCH_MMP && I2C && VIDEO_V4L2
+	select VIDEO_OV7670
+	select I2C_GPIO
+	select VIDEOBUF2_DMA_SG
+	---help---
+	  This is a Video4Linux2 driver for the integrated camera
+	  controller found on Marvell Armada 610 application
+	  processors (and likely beyond).  This is the controller found
+	  in OLPC XO 1.75 systems.
+
diff --git a/drivers/media/video/marvell-ccic/Makefile b/drivers/media/video/marvell-ccic/Makefile
new file mode 100644
index 00000000000..05a792c579a
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+cafe_ccic-y := cafe-driver.o mcam-core.o
+
+obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o
+mmp_camera-y := mmp-driver.o mcam-core.o
+
diff --git a/drivers/media/video/marvell-ccic/cafe-driver.c b/drivers/media/video/marvell-ccic/cafe-driver.c
new file mode 100644
index 00000000000..d030f9beae8
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/cafe-driver.c
@@ -0,0 +1,654 @@
+/*
+ * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe"
+ * multifunction chip.  Currently works with the Omnivision OV7670
+ * sensor.
+ *
+ * The data sheet for this device can be found at:
+ *    http://www.marvell.com/products/pc_connectivity/88alp01/
+ *
+ * Copyright 2006-11 One Laptop Per Child Association, Inc.
+ * Copyright 2006-11 Jonathan Corbet <corbet@lwn.net>
+ *
+ * Written by Jonathan Corbet, corbet@lwn.net.
+ *
+ * v4l2_device/v4l2_subdev conversion by:
+ * Copyright (C) 2009 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "mcam-core.h"
+
+#define CAFE_VERSION 0x000002
+
+
+/*
+ * Parameters.
+ */
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Video");
+
+
+
+
+struct cafe_camera {
+	int registered;			/* Fully initialized? */
+	struct mcam_camera mcam;
+	struct pci_dev *pdev;
+	wait_queue_head_t smbus_wait;	/* Waiting on i2c events */
+};
+
+/*
+ * Most of the camera controller registers are defined in mcam-core.h,
+ * but the Cafe platform has some additional registers of its own;
+ * they are described here.
+ */
+
+/*
+ * "General purpose register" has a couple of GPIOs used for sensor
+ * power and reset on OLPC XO 1.0 systems.
+ */
+#define REG_GPR		0xb4
+#define	  GPR_C1EN	  0x00000020	/* Pad 1 (power down) enable */
+#define	  GPR_C0EN	  0x00000010	/* Pad 0 (reset) enable */
+#define	  GPR_C1	  0x00000002	/* Control 1 value */
+/*
+ * Control 0 is wired to reset on OLPC machines.  For ov7x sensors,
+ * it is active low.
+ */
+#define	  GPR_C0	  0x00000001	/* Control 0 value */
+
+/*
+ * These registers control the SMBUS module for communicating
+ * with the sensor.
+ */
+#define REG_TWSIC0	0xb8	/* TWSI (smbus) control 0 */
+#define	  TWSIC0_EN	  0x00000001	/* TWSI enable */
+#define	  TWSIC0_MODE	  0x00000002	/* 1 = 16-bit, 0 = 8-bit */
+#define	  TWSIC0_SID	  0x000003fc	/* Slave ID */
+/*
+ * Subtle trickery: the slave ID field starts with bit 2.  But the
+ * Linux i2c stack wants to treat the bottommost bit as a separate
+ * read/write bit, which is why slave ID's are usually presented
+ * >>1.  For consistency with that behavior, we shift over three
+ * bits instead of two.
+ */
+#define	  TWSIC0_SID_SHIFT 3
+#define	  TWSIC0_CLKDIV	  0x0007fc00	/* Clock divider */
+#define	  TWSIC0_MASKACK  0x00400000	/* Mask ack from sensor */
+#define	  TWSIC0_OVMAGIC  0x00800000	/* Make it work on OV sensors */
+
+#define REG_TWSIC1	0xbc	/* TWSI control 1 */
+#define	  TWSIC1_DATA	  0x0000ffff	/* Data to/from camchip */
+#define	  TWSIC1_ADDR	  0x00ff0000	/* Address (register) */
+#define	  TWSIC1_ADDR_SHIFT 16
+#define	  TWSIC1_READ	  0x01000000	/* Set for read op */
+#define	  TWSIC1_WSTAT	  0x02000000	/* Write status */
+#define	  TWSIC1_RVALID	  0x04000000	/* Read data valid */
+#define	  TWSIC1_ERROR	  0x08000000	/* Something screwed up */
+
+/*
+ * Here's the weird global control registers
+ */
+#define REG_GL_CSR     0x3004  /* Control/status register */
+#define	  GCSR_SRS	 0x00000001	/* SW Reset set */
+#define	  GCSR_SRC	 0x00000002	/* SW Reset clear */
+#define	  GCSR_MRS	 0x00000004	/* Master reset set */
+#define	  GCSR_MRC	 0x00000008	/* HW Reset clear */
+#define	  GCSR_CCIC_EN	 0x00004000    /* CCIC Clock enable */
+#define REG_GL_IMASK   0x300c  /* Interrupt mask register */
+#define	  GIMSK_CCIC_EN		 0x00000004    /* CCIC Interrupt enable */
+
+#define REG_GL_FCR	0x3038	/* GPIO functional control register */
+#define	  GFCR_GPIO_ON	  0x08		/* Camera GPIO enabled */
+#define REG_GL_GPIOR	0x315c	/* GPIO register */
+#define	  GGPIO_OUT		0x80000	/* GPIO output */
+#define	  GGPIO_VAL		0x00008	/* Output pin value */
+
+#define REG_LEN		       (REG_GL_IMASK + 4)
+
+
+/*
+ * Debugging and related.
+ */
+#define cam_err(cam, fmt, arg...) \
+	dev_err(&(cam)->pdev->dev, fmt, ##arg);
+#define cam_warn(cam, fmt, arg...) \
+	dev_warn(&(cam)->pdev->dev, fmt, ##arg);
+
+/* -------------------------------------------------------------------- */
+/*
+ * The I2C/SMBUS interface to the camera itself starts here.  The
+ * controller handles SMBUS itself, presenting a relatively simple register
+ * interface; all we have to do is to tell it where to route the data.
+ */
+#define CAFE_SMBUS_TIMEOUT (HZ)  /* generous */
+
+static inline struct cafe_camera *to_cam(struct v4l2_device *dev)
+{
+	struct mcam_camera *m = container_of(dev, struct mcam_camera, v4l2_dev);
+	return container_of(m, struct cafe_camera, mcam);
+}
+
+
+static int cafe_smbus_write_done(struct mcam_camera *mcam)
+{
+	unsigned long flags;
+	int c1;
+
+	/*
+	 * We must delay after the interrupt, or the controller gets confused
+	 * and never does give us good status.  Fortunately, we don't do this
+	 * often.
+	 */
+	udelay(20);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	c1 = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+	return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT;
+}
+
+static int cafe_smbus_write_data(struct cafe_camera *cam,
+		u16 addr, u8 command, u8 value)
+{
+	unsigned int rval;
+	unsigned long flags;
+	struct mcam_camera *mcam = &cam->mcam;
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+	rval |= TWSIC0_OVMAGIC;  /* Make OV sensors work */
+	/*
+	 * Marvell sez set clkdiv to all 1's for now.
+	 */
+	rval |= TWSIC0_CLKDIV;
+	mcam_reg_write(mcam, REG_TWSIC0, rval);
+	(void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */
+	rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+	mcam_reg_write(mcam, REG_TWSIC1, rval);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	/* Unfortunately, reading TWSIC1 too soon after sending a command
+	 * causes the device to die.
+	 * Use a busy-wait because we often send a large quantity of small
+	 * commands at-once; using msleep() would cause a lot of context
+	 * switches which take longer than 2ms, resulting in a noticeable
+	 * boot-time and capture-start delays.
+	 */
+	mdelay(2);
+
+	/*
+	 * Another sad fact is that sometimes, commands silently complete but
+	 * cafe_smbus_write_done() never becomes aware of this.
+	 * This happens at random and appears to possible occur with any
+	 * command.
+	 * We don't understand why this is. We work around this issue
+	 * with the timeout in the wait below, assuming that all commands
+	 * complete within the timeout.
+	 */
+	wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(mcam),
+			CAFE_SMBUS_TIMEOUT);
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	if (rval & TWSIC1_WSTAT) {
+		cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr,
+				command, value);
+		return -EIO;
+	}
+	if (rval & TWSIC1_ERROR) {
+		cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr,
+				command, value);
+		return -EIO;
+	}
+	return 0;
+}
+
+
+
+static int cafe_smbus_read_done(struct mcam_camera *mcam)
+{
+	unsigned long flags;
+	int c1;
+
+	/*
+	 * We must delay after the interrupt, or the controller gets confused
+	 * and never does give us good status.  Fortunately, we don't do this
+	 * often.
+	 */
+	udelay(20);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	c1 = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+	return c1 & (TWSIC1_RVALID|TWSIC1_ERROR);
+}
+
+
+
+static int cafe_smbus_read_data(struct cafe_camera *cam,
+		u16 addr, u8 command, u8 *value)
+{
+	unsigned int rval;
+	unsigned long flags;
+	struct mcam_camera *mcam = &cam->mcam;
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID);
+	rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */
+	/*
+	 * Marvel sez set clkdiv to all 1's for now.
+	 */
+	rval |= TWSIC0_CLKDIV;
+	mcam_reg_write(mcam, REG_TWSIC0, rval);
+	(void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */
+	rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR);
+	mcam_reg_write(mcam, REG_TWSIC1, rval);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	wait_event_timeout(cam->smbus_wait,
+			cafe_smbus_read_done(mcam), CAFE_SMBUS_TIMEOUT);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	rval = mcam_reg_read(mcam, REG_TWSIC1);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+
+	if (rval & TWSIC1_ERROR) {
+		cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command);
+		return -EIO;
+	}
+	if (!(rval & TWSIC1_RVALID)) {
+		cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr,
+				command);
+		return -EIO;
+	}
+	*value = rval & 0xff;
+	return 0;
+}
+
+/*
+ * Perform a transfer over SMBUS.  This thing is called under
+ * the i2c bus lock, so we shouldn't race with ourselves...
+ */
+static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+		unsigned short flags, char rw, u8 command,
+		int size, union i2c_smbus_data *data)
+{
+	struct cafe_camera *cam = i2c_get_adapdata(adapter);
+	int ret = -EINVAL;
+
+	/*
+	 * This interface would appear to only do byte data ops.  OK
+	 * it can do word too, but the cam chip has no use for that.
+	 */
+	if (size != I2C_SMBUS_BYTE_DATA) {
+		cam_err(cam, "funky xfer size %d\n", size);
+		return -EINVAL;
+	}
+
+	if (rw == I2C_SMBUS_WRITE)
+		ret = cafe_smbus_write_data(cam, addr, command, data->byte);
+	else if (rw == I2C_SMBUS_READ)
+		ret = cafe_smbus_read_data(cam, addr, command, &data->byte);
+	return ret;
+}
+
+
+static void cafe_smbus_enable_irq(struct cafe_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->mcam.dev_lock, flags);
+	mcam_reg_set_bit(&cam->mcam, REG_IRQMASK, TWSIIRQS);
+	spin_unlock_irqrestore(&cam->mcam.dev_lock, flags);
+}
+
+static u32 cafe_smbus_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_READ_BYTE_DATA  |
+	       I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+static struct i2c_algorithm cafe_smbus_algo = {
+	.smbus_xfer = cafe_smbus_xfer,
+	.functionality = cafe_smbus_func
+};
+
+static int cafe_smbus_setup(struct cafe_camera *cam)
+{
+	struct i2c_adapter *adap;
+	int ret;
+
+	adap = kzalloc(sizeof(*adap), GFP_KERNEL);
+	if (adap == NULL)
+		return -ENOMEM;
+	cam->mcam.i2c_adapter = adap;
+	cafe_smbus_enable_irq(cam);
+	adap->owner = THIS_MODULE;
+	adap->algo = &cafe_smbus_algo;
+	strcpy(adap->name, "cafe_ccic");
+	adap->dev.parent = &cam->pdev->dev;
+	i2c_set_adapdata(adap, cam);
+	ret = i2c_add_adapter(adap);
+	if (ret)
+		printk(KERN_ERR "Unable to register cafe i2c adapter\n");
+	return ret;
+}
+
+static void cafe_smbus_shutdown(struct cafe_camera *cam)
+{
+	i2c_del_adapter(cam->mcam.i2c_adapter);
+	kfree(cam->mcam.i2c_adapter);
+}
+
+
+/*
+ * Controller-level stuff
+ */
+
+static void cafe_ctlr_init(struct mcam_camera *mcam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+	/*
+	 * Added magic to bring up the hardware on the B-Test board
+	 */
+	mcam_reg_write(mcam, 0x3038, 0x8);
+	mcam_reg_write(mcam, 0x315c, 0x80008);
+	/*
+	 * Go through the dance needed to wake the device up.
+	 * Note that these registers are global and shared
+	 * with the NAND and SD devices.  Interaction between the
+	 * three still needs to be examined.
+	 */
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRC);
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRS);
+	/*
+	 * Here we must wait a bit for the controller to come around.
+	 */
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+	msleep(5);
+	spin_lock_irqsave(&mcam->dev_lock, flags);
+
+	mcam_reg_write(mcam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC);
+	mcam_reg_set_bit(mcam, REG_GL_IMASK, GIMSK_CCIC_EN);
+	/*
+	 * Mask all interrupts.
+	 */
+	mcam_reg_write(mcam, REG_IRQMASK, 0);
+	spin_unlock_irqrestore(&mcam->dev_lock, flags);
+}
+
+
+static void cafe_ctlr_power_up(struct mcam_camera *mcam)
+{
+	/*
+	 * Part one of the sensor dance: turn the global
+	 * GPIO signal on.
+	 */
+	mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON);
+	mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL);
+	/*
+	 * Put the sensor into operational mode (assumes OLPC-style
+	 * wiring).  Control 0 is reset - set to 1 to operate.
+	 * Control 1 is power down, set to 0 to operate.
+	 */
+	mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */
+	mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0);
+}
+
+static void cafe_ctlr_power_down(struct mcam_camera *mcam)
+{
+	mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1);
+	mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON);
+	mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT);
+}
+
+
+
+/*
+ * The platform interrupt handler.
+ */
+static irqreturn_t cafe_irq(int irq, void *data)
+{
+	struct cafe_camera *cam = data;
+	struct mcam_camera *mcam = &cam->mcam;
+	unsigned int irqs, handled;
+
+	spin_lock(&mcam->dev_lock);
+	irqs = mcam_reg_read(mcam, REG_IRQSTAT);
+	handled = cam->registered && mccic_irq(mcam, irqs);
+	if (irqs & TWSIIRQS) {
+		mcam_reg_write(mcam, REG_IRQSTAT, TWSIIRQS);
+		wake_up(&cam->smbus_wait);
+		handled = 1;
+	}
+	spin_unlock(&mcam->dev_lock);
+	return IRQ_RETVAL(handled);
+}
+
+
+/* -------------------------------------------------------------------------- */
+/*
+ * PCI interface stuff.
+ */
+
+static int cafe_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	int ret;
+	struct cafe_camera *cam;
+	struct mcam_camera *mcam;
+
+	/*
+	 * Start putting together one of our big camera structures.
+	 */
+	ret = -ENOMEM;
+	cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL);
+	if (cam == NULL)
+		goto out;
+	cam->pdev = pdev;
+	mcam = &cam->mcam;
+	mcam->chip_id = V4L2_IDENT_CAFE;
+	spin_lock_init(&mcam->dev_lock);
+	init_waitqueue_head(&cam->smbus_wait);
+	mcam->plat_power_up = cafe_ctlr_power_up;
+	mcam->plat_power_down = cafe_ctlr_power_down;
+	mcam->dev = &pdev->dev;
+	/*
+	 * Set the clock speed for the XO 1; I don't believe this
+	 * driver has ever run anywhere else.
+	 */
+	mcam->clock_speed = 45;
+	mcam->use_smbus = 1;
+	/*
+	 * Vmalloc mode for buffers is traditional with this driver.
+	 * We *might* be able to run DMA_contig, especially on a system
+	 * with CMA in it.
+	 */
+	mcam->buffer_mode = B_vmalloc;
+	/*
+	 * Get set up on the PCI bus.
+	 */
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto out_free;
+	pci_set_master(pdev);
+
+	ret = -EIO;
+	mcam->regs = pci_iomap(pdev, 0, 0);
+	if (!mcam->regs) {
+		printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
+		goto out_disable;
+	}
+	ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam);
+	if (ret)
+		goto out_iounmap;
+
+	/*
+	 * Initialize the controller and leave it powered up.  It will
+	 * stay that way until the sensor driver shows up.
+	 */
+	cafe_ctlr_init(mcam);
+	cafe_ctlr_power_up(mcam);
+	/*
+	 * Set up I2C/SMBUS communications.  We have to drop the mutex here
+	 * because the sensor could attach in this call chain, leading to
+	 * unsightly deadlocks.
+	 */
+	ret = cafe_smbus_setup(cam);
+	if (ret)
+		goto out_pdown;
+
+	ret = mccic_register(mcam);
+	if (ret == 0) {
+		cam->registered = 1;
+		return 0;
+	}
+
+	cafe_smbus_shutdown(cam);
+out_pdown:
+	cafe_ctlr_power_down(mcam);
+	free_irq(pdev->irq, cam);
+out_iounmap:
+	pci_iounmap(pdev, mcam->regs);
+out_disable:
+	pci_disable_device(pdev);
+out_free:
+	kfree(cam);
+out:
+	return ret;
+}
+
+
+/*
+ * Shut down an initialized device
+ */
+static void cafe_shutdown(struct cafe_camera *cam)
+{
+	mccic_shutdown(&cam->mcam);
+	cafe_smbus_shutdown(cam);
+	free_irq(cam->pdev->irq, cam);
+	pci_iounmap(cam->pdev, cam->mcam.regs);
+}
+
+
+static void cafe_pci_remove(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
+	struct cafe_camera *cam = to_cam(v4l2_dev);
+
+	if (cam == NULL) {
+		printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
+		return;
+	}
+	cafe_shutdown(cam);
+	kfree(cam);
+}
+
+
+#ifdef CONFIG_PM
+/*
+ * Basic power management.
+ */
+static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
+	struct cafe_camera *cam = to_cam(v4l2_dev);
+	int ret;
+
+	ret = pci_save_state(pdev);
+	if (ret)
+		return ret;
+	mccic_suspend(&cam->mcam);
+	pci_disable_device(pdev);
+	return 0;
+}
+
+
+static int cafe_pci_resume(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev);
+	struct cafe_camera *cam = to_cam(v4l2_dev);
+	int ret = 0;
+
+	pci_restore_state(pdev);
+	ret = pci_enable_device(pdev);
+
+	if (ret) {
+		cam_warn(cam, "Unable to re-enable device on resume!\n");
+		return ret;
+	}
+	cafe_ctlr_init(&cam->mcam);
+	return mccic_resume(&cam->mcam);
+}
+
+#endif  /* CONFIG_PM */
+
+static struct pci_device_id cafe_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL,
+		     PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_ids);
+
+static struct pci_driver cafe_pci_driver = {
+	.name = "cafe1000-ccic",
+	.id_table = cafe_ids,
+	.probe = cafe_pci_probe,
+	.remove = cafe_pci_remove,
+#ifdef CONFIG_PM
+	.suspend = cafe_pci_suspend,
+	.resume = cafe_pci_resume,
+#endif
+};
+
+
+
+
+static int __init cafe_init(void)
+{
+	int ret;
+
+	printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
+			CAFE_VERSION);
+	ret = pci_register_driver(&cafe_pci_driver);
+	if (ret) {
+		printk(KERN_ERR "Unable to register cafe_ccic driver\n");
+		goto out;
+	}
+	ret = 0;
+
+out:
+	return ret;
+}
+
+
+static void __exit cafe_exit(void)
+{
+	pci_unregister_driver(&cafe_pci_driver);
+}
+
+module_init(cafe_init);
+module_exit(cafe_exit);
diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c
new file mode 100644
index 00000000000..83c14514cd5
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/mcam-core.c
@@ -0,0 +1,1843 @@
+/*
+ * The Marvell camera core.  This device appears in a number of settings,
+ * so it needs platform-specific support outside of the core.
+ *
+ * Copyright 2011 Jonathan Corbet corbet@lwn.net
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/ov7670.h>
+#include <media/videobuf2-vmalloc.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "mcam-core.h"
+
+/*
+ * Basic frame stats - to be deleted shortly
+ */
+static int frames;
+static int singles;
+static int delivered;
+
+#ifdef MCAM_MODE_VMALLOC
+/*
+ * Internal DMA buffer management.  Since the controller cannot do S/G I/O,
+ * we must have physically contiguous buffers to bring frames into.
+ * These parameters control how many buffers we use, whether we
+ * allocate them at load time (better chance of success, but nails down
+ * memory) or when somebody tries to use the camera (riskier), and,
+ * for load-time allocation, how big they should be.
+ *
+ * The controller can cycle through three buffers.  We could use
+ * more by flipping pointers around, but it probably makes little
+ * sense.
+ */
+
+static int alloc_bufs_at_read;
+module_param(alloc_bufs_at_read, bool, 0444);
+MODULE_PARM_DESC(alloc_bufs_at_read,
+		"Non-zero value causes DMA buffers to be allocated when the "
+		"video capture device is read, rather than at module load "
+		"time.  This saves memory, but decreases the chances of "
+		"successfully getting those buffers.  This parameter is "
+		"only used in the vmalloc buffer mode");
+
+static int n_dma_bufs = 3;
+module_param(n_dma_bufs, uint, 0644);
+MODULE_PARM_DESC(n_dma_bufs,
+		"The number of DMA buffers to allocate.  Can be either two "
+		"(saves memory, makes timing tighter) or three.");
+
+static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2;  /* Worst case */
+module_param(dma_buf_size, uint, 0444);
+MODULE_PARM_DESC(dma_buf_size,
+		"The size of the allocated DMA buffers.  If actual operating "
+		"parameters require larger buffers, an attempt to reallocate "
+		"will be made.");
+#else /* MCAM_MODE_VMALLOC */
+static const int alloc_bufs_at_read = 0;
+static const int n_dma_bufs = 3;  /* Used by S/G_PARM */
+#endif /* MCAM_MODE_VMALLOC */
+
+static int flip;
+module_param(flip, bool, 0444);
+MODULE_PARM_DESC(flip,
+		"If set, the sensor will be instructed to flip the image "
+		"vertically.");
+
+static int buffer_mode = -1;
+module_param(buffer_mode, int, 0444);
+MODULE_PARM_DESC(buffer_mode,
+		"Set the buffer mode to be used; default is to go with what "
+		"the platform driver asks for.  Set to 0 for vmalloc, 1 for "
+		"DMA contiguous.");
+
+/*
+ * Status flags.  Always manipulated with bit operations.
+ */
+#define CF_BUF0_VALID	 0	/* Buffers valid - first three */
+#define CF_BUF1_VALID	 1
+#define CF_BUF2_VALID	 2
+#define CF_DMA_ACTIVE	 3	/* A frame is incoming */
+#define CF_CONFIG_NEEDED 4	/* Must configure hardware */
+#define CF_SINGLE_BUFFER 5	/* Running with a single buffer */
+#define CF_SG_RESTART	 6	/* SG restart needed */
+
+#define sensor_call(cam, o, f, args...) \
+	v4l2_subdev_call(cam->sensor, o, f, ##args)
+
+static struct mcam_format_struct {
+	__u8 *desc;
+	__u32 pixelformat;
+	int bpp;   /* Bytes per pixel */
+	enum v4l2_mbus_pixelcode mbus_code;
+} mcam_formats[] = {
+	{
+		.desc		= "YUYV 4:2:2",
+		.pixelformat	= V4L2_PIX_FMT_YUYV,
+		.mbus_code	= V4L2_MBUS_FMT_YUYV8_2X8,
+		.bpp		= 2,
+	},
+	{
+		.desc		= "RGB 444",
+		.pixelformat	= V4L2_PIX_FMT_RGB444,
+		.mbus_code	= V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE,
+		.bpp		= 2,
+	},
+	{
+		.desc		= "RGB 565",
+		.pixelformat	= V4L2_PIX_FMT_RGB565,
+		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_LE,
+		.bpp		= 2,
+	},
+	{
+		.desc		= "Raw RGB Bayer",
+		.pixelformat	= V4L2_PIX_FMT_SBGGR8,
+		.mbus_code	= V4L2_MBUS_FMT_SBGGR8_1X8,
+		.bpp		= 1
+	},
+};
+#define N_MCAM_FMTS ARRAY_SIZE(mcam_formats)
+
+static struct mcam_format_struct *mcam_find_format(u32 pixelformat)
+{
+	unsigned i;
+
+	for (i = 0; i < N_MCAM_FMTS; i++)
+		if (mcam_formats[i].pixelformat == pixelformat)
+			return mcam_formats + i;
+	/* Not found? Then return the first format. */
+	return mcam_formats;
+}
+
+/*
+ * The default format we use until somebody says otherwise.
+ */
+static const struct v4l2_pix_format mcam_def_pix_format = {
+	.width		= VGA_WIDTH,
+	.height		= VGA_HEIGHT,
+	.pixelformat	= V4L2_PIX_FMT_YUYV,
+	.field		= V4L2_FIELD_NONE,
+	.bytesperline	= VGA_WIDTH*2,
+	.sizeimage	= VGA_WIDTH*VGA_HEIGHT*2,
+};
+
+static const enum v4l2_mbus_pixelcode mcam_def_mbus_code =
+					V4L2_MBUS_FMT_YUYV8_2X8;
+
+
+/*
+ * The two-word DMA descriptor format used by the Armada 610 and like.  There
+ * Is a three-word format as well (set C1_DESC_3WORD) where the third
+ * word is a pointer to the next descriptor, but we don't use it.  Two-word
+ * descriptors have to be contiguous in memory.
+ */
+struct mcam_dma_desc {
+	u32 dma_addr;
+	u32 segment_len;
+};
+
+/*
+ * Our buffer type for working with videobuf2.  Note that the vb2
+ * developers have decreed that struct vb2_buffer must be at the
+ * beginning of this structure.
+ */
+struct mcam_vb_buffer {
+	struct vb2_buffer vb_buf;
+	struct list_head queue;
+	struct mcam_dma_desc *dma_desc;	/* Descriptor virtual address */
+	dma_addr_t dma_desc_pa;		/* Descriptor physical address */
+	int dma_desc_nent;		/* Number of mapped descriptors */
+};
+
+static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_buffer *vb)
+{
+	return container_of(vb, struct mcam_vb_buffer, vb_buf);
+}
+
+/*
+ * Hand a completed buffer back to user space.
+ */
+static void mcam_buffer_done(struct mcam_camera *cam, int frame,
+		struct vb2_buffer *vbuf)
+{
+	vbuf->v4l2_buf.bytesused = cam->pix_format.sizeimage;
+	vbuf->v4l2_buf.sequence = cam->buf_seq[frame];
+	vb2_set_plane_payload(vbuf, 0, cam->pix_format.sizeimage);
+	vb2_buffer_done(vbuf, VB2_BUF_STATE_DONE);
+}
+
+
+
+/*
+ * Debugging and related.
+ */
+#define cam_err(cam, fmt, arg...) \
+	dev_err((cam)->dev, fmt, ##arg);
+#define cam_warn(cam, fmt, arg...) \
+	dev_warn((cam)->dev, fmt, ##arg);
+#define cam_dbg(cam, fmt, arg...) \
+	dev_dbg((cam)->dev, fmt, ##arg);
+
+
+/*
+ * Flag manipulation helpers
+ */
+static void mcam_reset_buffers(struct mcam_camera *cam)
+{
+	int i;
+
+	cam->next_buf = -1;
+	for (i = 0; i < cam->nbufs; i++)
+		clear_bit(i, &cam->flags);
+}
+
+static inline int mcam_needs_config(struct mcam_camera *cam)
+{
+	return test_bit(CF_CONFIG_NEEDED, &cam->flags);
+}
+
+static void mcam_set_config_needed(struct mcam_camera *cam, int needed)
+{
+	if (needed)
+		set_bit(CF_CONFIG_NEEDED, &cam->flags);
+	else
+		clear_bit(CF_CONFIG_NEEDED, &cam->flags);
+}
+
+/* ------------------------------------------------------------------- */
+/*
+ * Make the controller start grabbing images.  Everything must
+ * be set up before doing this.
+ */
+static void mcam_ctlr_start(struct mcam_camera *cam)
+{
+	/* set_bit performs a read, so no other barrier should be
+	   needed here */
+	mcam_reg_set_bit(cam, REG_CTRL0, C0_ENABLE);
+}
+
+static void mcam_ctlr_stop(struct mcam_camera *cam)
+{
+	mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
+}
+
+/* ------------------------------------------------------------------- */
+
+#ifdef MCAM_MODE_VMALLOC
+/*
+ * Code specific to the vmalloc buffer mode.
+ */
+
+/*
+ * Allocate in-kernel DMA buffers for vmalloc mode.
+ */
+static int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime)
+{
+	int i;
+
+	mcam_set_config_needed(cam, 1);
+	if (loadtime)
+		cam->dma_buf_size = dma_buf_size;
+	else
+		cam->dma_buf_size = cam->pix_format.sizeimage;
+	if (n_dma_bufs > 3)
+		n_dma_bufs = 3;
+
+	cam->nbufs = 0;
+	for (i = 0; i < n_dma_bufs; i++) {
+		cam->dma_bufs[i] = dma_alloc_coherent(cam->dev,
+				cam->dma_buf_size, cam->dma_handles + i,
+				GFP_KERNEL);
+		if (cam->dma_bufs[i] == NULL) {
+			cam_warn(cam, "Failed to allocate DMA buffer\n");
+			break;
+		}
+		(cam->nbufs)++;
+	}
+
+	switch (cam->nbufs) {
+	case 1:
+		dma_free_coherent(cam->dev, cam->dma_buf_size,
+				cam->dma_bufs[0], cam->dma_handles[0]);
+		cam->nbufs = 0;
+	case 0:
+		cam_err(cam, "Insufficient DMA buffers, cannot operate\n");
+		return -ENOMEM;
+
+	case 2:
+		if (n_dma_bufs > 2)
+			cam_warn(cam, "Will limp along with only 2 buffers\n");
+		break;
+	}
+	return 0;
+}
+
+static void mcam_free_dma_bufs(struct mcam_camera *cam)
+{
+	int i;
+
+	for (i = 0; i < cam->nbufs; i++) {
+		dma_free_coherent(cam->dev, cam->dma_buf_size,
+				cam->dma_bufs[i], cam->dma_handles[i]);
+		cam->dma_bufs[i] = NULL;
+	}
+	cam->nbufs = 0;
+}
+
+
+/*
+ * Set up DMA buffers when operating in vmalloc mode
+ */
+static void mcam_ctlr_dma_vmalloc(struct mcam_camera *cam)
+{
+	/*
+	 * Store the first two Y buffers (we aren't supporting
+	 * planar formats for now, so no UV bufs).  Then either
+	 * set the third if it exists, or tell the controller
+	 * to just use two.
+	 */
+	mcam_reg_write(cam, REG_Y0BAR, cam->dma_handles[0]);
+	mcam_reg_write(cam, REG_Y1BAR, cam->dma_handles[1]);
+	if (cam->nbufs > 2) {
+		mcam_reg_write(cam, REG_Y2BAR, cam->dma_handles[2]);
+		mcam_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS);
+	} else
+		mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
+	if (cam->chip_id == V4L2_IDENT_CAFE)
+		mcam_reg_write(cam, REG_UBAR, 0); /* 32 bits only */
+}
+
+/*
+ * Copy data out to user space in the vmalloc case
+ */
+static void mcam_frame_tasklet(unsigned long data)
+{
+	struct mcam_camera *cam = (struct mcam_camera *) data;
+	int i;
+	unsigned long flags;
+	struct mcam_vb_buffer *buf;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	for (i = 0; i < cam->nbufs; i++) {
+		int bufno = cam->next_buf;
+
+		if (cam->state != S_STREAMING || bufno < 0)
+			break;  /* I/O got stopped */
+		if (++(cam->next_buf) >= cam->nbufs)
+			cam->next_buf = 0;
+		if (!test_bit(bufno, &cam->flags))
+			continue;
+		if (list_empty(&cam->buffers)) {
+			singles++;
+			break;  /* Leave it valid, hope for better later */
+		}
+		delivered++;
+		clear_bit(bufno, &cam->flags);
+		buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer,
+				queue);
+		list_del_init(&buf->queue);
+		/*
+		 * Drop the lock during the big copy.  This *should* be safe...
+		 */
+		spin_unlock_irqrestore(&cam->dev_lock, flags);
+		memcpy(vb2_plane_vaddr(&buf->vb_buf, 0), cam->dma_bufs[bufno],
+				cam->pix_format.sizeimage);
+		mcam_buffer_done(cam, bufno, &buf->vb_buf);
+		spin_lock_irqsave(&cam->dev_lock, flags);
+	}
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+
+/*
+ * Make sure our allocated buffers are up to the task.
+ */
+static int mcam_check_dma_buffers(struct mcam_camera *cam)
+{
+	if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage)
+			mcam_free_dma_bufs(cam);
+	if (cam->nbufs == 0)
+		return mcam_alloc_dma_bufs(cam, 0);
+	return 0;
+}
+
+static void mcam_vmalloc_done(struct mcam_camera *cam, int frame)
+{
+	tasklet_schedule(&cam->s_tasklet);
+}
+
+#else /* MCAM_MODE_VMALLOC */
+
+static inline int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime)
+{
+	return 0;
+}
+
+static inline void mcam_free_dma_bufs(struct mcam_camera *cam)
+{
+	return;
+}
+
+static inline int mcam_check_dma_buffers(struct mcam_camera *cam)
+{
+	return 0;
+}
+
+
+
+#endif /* MCAM_MODE_VMALLOC */
+
+
+#ifdef MCAM_MODE_DMA_CONTIG
+/* ---------------------------------------------------------------------- */
+/*
+ * DMA-contiguous code.
+ */
+/*
+ * Set up a contiguous buffer for the given frame.  Here also is where
+ * the underrun strategy is set: if there is no buffer available, reuse
+ * the buffer from the other BAR and set the CF_SINGLE_BUFFER flag to
+ * keep the interrupt handler from giving that buffer back to user
+ * space.  In this way, we always have a buffer to DMA to and don't
+ * have to try to play games stopping and restarting the controller.
+ */
+static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame)
+{
+	struct mcam_vb_buffer *buf;
+	/*
+	 * If there are no available buffers, go into single mode
+	 */
+	if (list_empty(&cam->buffers)) {
+		buf = cam->vb_bufs[frame ^ 0x1];
+		cam->vb_bufs[frame] = buf;
+		mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR,
+				vb2_dma_contig_plane_paddr(&buf->vb_buf, 0));
+		set_bit(CF_SINGLE_BUFFER, &cam->flags);
+		singles++;
+		return;
+	}
+	/*
+	 * OK, we have a buffer we can use.
+	 */
+	buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
+	list_del_init(&buf->queue);
+	mcam_reg_write(cam, frame == 0 ? REG_Y0BAR : REG_Y1BAR,
+			vb2_dma_contig_plane_paddr(&buf->vb_buf, 0));
+	cam->vb_bufs[frame] = buf;
+	clear_bit(CF_SINGLE_BUFFER, &cam->flags);
+}
+
+/*
+ * Initial B_DMA_contig setup.
+ */
+static void mcam_ctlr_dma_contig(struct mcam_camera *cam)
+{
+	mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS);
+	cam->nbufs = 2;
+	mcam_set_contig_buffer(cam, 0);
+	mcam_set_contig_buffer(cam, 1);
+}
+
+/*
+ * Frame completion handling.
+ */
+static void mcam_dma_contig_done(struct mcam_camera *cam, int frame)
+{
+	struct mcam_vb_buffer *buf = cam->vb_bufs[frame];
+
+	if (!test_bit(CF_SINGLE_BUFFER, &cam->flags)) {
+		delivered++;
+		mcam_buffer_done(cam, frame, &buf->vb_buf);
+	}
+	mcam_set_contig_buffer(cam, frame);
+}
+
+#endif /* MCAM_MODE_DMA_CONTIG */
+
+#ifdef MCAM_MODE_DMA_SG
+/* ---------------------------------------------------------------------- */
+/*
+ * Scatter/gather-specific code.
+ */
+
+/*
+ * Set up the next buffer for S/G I/O; caller should be sure that
+ * the controller is stopped and a buffer is available.
+ */
+static void mcam_sg_next_buffer(struct mcam_camera *cam)
+{
+	struct mcam_vb_buffer *buf;
+
+	buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
+	list_del_init(&buf->queue);
+	mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa);
+	mcam_reg_write(cam, REG_DESC_LEN_Y,
+			buf->dma_desc_nent*sizeof(struct mcam_dma_desc));
+	mcam_reg_write(cam, REG_DESC_LEN_U, 0);
+	mcam_reg_write(cam, REG_DESC_LEN_V, 0);
+	cam->vb_bufs[0] = buf;
+}
+
+/*
+ * Initial B_DMA_sg setup
+ */
+static void mcam_ctlr_dma_sg(struct mcam_camera *cam)
+{
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD);
+	mcam_sg_next_buffer(cam);
+	mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA);
+	cam->nbufs = 3;
+}
+
+
+/*
+ * Frame completion with S/G is trickier.  We can't muck with
+ * a descriptor chain on the fly, since the controller buffers it
+ * internally.  So we have to actually stop and restart; Marvell
+ * says this is the way to do it.
+ *
+ * Of course, stopping is easier said than done; experience shows
+ * that the controller can start a frame *after* C0_ENABLE has been
+ * cleared.  So when running in S/G mode, the controller is "stopped"
+ * on receipt of the start-of-frame interrupt.  That means we can
+ * safely change the DMA descriptor array here and restart things
+ * (assuming there's another buffer waiting to go).
+ */
+static void mcam_dma_sg_done(struct mcam_camera *cam, int frame)
+{
+	struct mcam_vb_buffer *buf = cam->vb_bufs[0];
+
+	/*
+	 * Very Bad Not Good Things happen if you don't clear
+	 * C1_DESC_ENA before making any descriptor changes.
+	 */
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA);
+	/*
+	 * If we have another buffer available, put it in and
+	 * restart the engine.
+	 */
+	if (!list_empty(&cam->buffers)) {
+		mcam_sg_next_buffer(cam);
+		mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA);
+		mcam_ctlr_start(cam);
+	/*
+	 * Otherwise set CF_SG_RESTART and the controller will
+	 * be restarted once another buffer shows up.
+	 */
+	} else {
+		set_bit(CF_SG_RESTART, &cam->flags);
+		singles++;
+	}
+	/*
+	 * Now we can give the completed frame back to user space.
+	 */
+	delivered++;
+	mcam_buffer_done(cam, frame, &buf->vb_buf);
+}
+
+
+/*
+ * Scatter/gather mode requires stopping the controller between
+ * frames so we can put in a new DMA descriptor array.  If no new
+ * buffer exists at frame completion, the controller is left stopped;
+ * this function is charged with gettig things going again.
+ */
+static void mcam_sg_restart(struct mcam_camera *cam)
+{
+	mcam_ctlr_dma_sg(cam);
+	mcam_ctlr_start(cam);
+	clear_bit(CF_SG_RESTART, &cam->flags);
+}
+
+#else /* MCAM_MODE_DMA_SG */
+
+static inline void mcam_sg_restart(struct mcam_camera *cam)
+{
+	return;
+}
+
+#endif /* MCAM_MODE_DMA_SG */
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Buffer-mode-independent controller code.
+ */
+
+/*
+ * Image format setup
+ */
+static void mcam_ctlr_image(struct mcam_camera *cam)
+{
+	int imgsz;
+	struct v4l2_pix_format *fmt = &cam->pix_format;
+
+	imgsz = ((fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK) |
+		(fmt->bytesperline & IMGSZ_H_MASK);
+	mcam_reg_write(cam, REG_IMGSIZE, imgsz);
+	mcam_reg_write(cam, REG_IMGOFFSET, 0);
+	/* YPITCH just drops the last two bits */
+	mcam_reg_write_mask(cam, REG_IMGPITCH, fmt->bytesperline,
+			IMGP_YP_MASK);
+	/*
+	 * Tell the controller about the image format we are using.
+	 */
+	switch (cam->pix_format.pixelformat) {
+	case V4L2_PIX_FMT_YUYV:
+	    mcam_reg_write_mask(cam, REG_CTRL0,
+			    C0_DF_YUV|C0_YUV_PACKED|C0_YUVE_YUYV,
+			    C0_DF_MASK);
+	    break;
+
+	case V4L2_PIX_FMT_RGB444:
+	    mcam_reg_write_mask(cam, REG_CTRL0,
+			    C0_DF_RGB|C0_RGBF_444|C0_RGB4_XRGB,
+			    C0_DF_MASK);
+		/* Alpha value? */
+	    break;
+
+	case V4L2_PIX_FMT_RGB565:
+	    mcam_reg_write_mask(cam, REG_CTRL0,
+			    C0_DF_RGB|C0_RGBF_565|C0_RGB5_BGGR,
+			    C0_DF_MASK);
+	    break;
+
+	default:
+	    cam_err(cam, "Unknown format %x\n", cam->pix_format.pixelformat);
+	    break;
+	}
+	/*
+	 * Make sure it knows we want to use hsync/vsync.
+	 */
+	mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC,
+			C0_SIFM_MASK);
+}
+
+
+/*
+ * Configure the controller for operation; caller holds the
+ * device mutex.
+ */
+static int mcam_ctlr_configure(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	cam->dma_setup(cam);
+	mcam_ctlr_image(cam);
+	mcam_set_config_needed(cam, 0);
+	clear_bit(CF_SG_RESTART, &cam->flags);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	return 0;
+}
+
+static void mcam_ctlr_irq_enable(struct mcam_camera *cam)
+{
+	/*
+	 * Clear any pending interrupts, since we do not
+	 * expect to have I/O active prior to enabling.
+	 */
+	mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS);
+	mcam_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS);
+}
+
+static void mcam_ctlr_irq_disable(struct mcam_camera *cam)
+{
+	mcam_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS);
+}
+
+
+
+static void mcam_ctlr_init(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	/*
+	 * Make sure it's not powered down.
+	 */
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
+	/*
+	 * Turn off the enable bit.  It sure should be off anyway,
+	 * but it's good to be sure.
+	 */
+	mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE);
+	/*
+	 * Clock the sensor appropriately.  Controller clock should
+	 * be 48MHz, sensor "typical" value is half that.
+	 */
+	mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+
+/*
+ * Stop the controller, and don't return until we're really sure that no
+ * further DMA is going on.
+ */
+static void mcam_ctlr_stop_dma(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	/*
+	 * Theory: stop the camera controller (whether it is operating
+	 * or not).  Delay briefly just in case we race with the SOF
+	 * interrupt, then wait until no DMA is active.
+	 */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	clear_bit(CF_SG_RESTART, &cam->flags);
+	mcam_ctlr_stop(cam);
+	cam->state = S_IDLE;
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	msleep(40);
+	if (test_bit(CF_DMA_ACTIVE, &cam->flags))
+		cam_err(cam, "Timeout waiting for DMA to end\n");
+		/* This would be bad news - what now? */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	mcam_ctlr_irq_disable(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+/*
+ * Power up and down.
+ */
+static void mcam_ctlr_power_up(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	cam->plat_power_up(cam);
+	mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	msleep(5); /* Just to be sure */
+}
+
+static void mcam_ctlr_power_down(struct mcam_camera *cam)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	/*
+	 * School of hard knocks department: be sure we do any register
+	 * twiddling on the controller *before* calling the platform
+	 * power down routine.
+	 */
+	mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN);
+	cam->plat_power_down(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+}
+
+/* -------------------------------------------------------------------- */
+/*
+ * Communications with the sensor.
+ */
+
+static int __mcam_cam_reset(struct mcam_camera *cam)
+{
+	return sensor_call(cam, core, reset, 0);
+}
+
+/*
+ * We have found the sensor on the i2c.  Let's try to have a
+ * conversation.
+ */
+static int mcam_cam_init(struct mcam_camera *cam)
+{
+	struct v4l2_dbg_chip_ident chip;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->state != S_NOTREADY)
+		cam_warn(cam, "Cam init with device in funky state %d",
+				cam->state);
+	ret = __mcam_cam_reset(cam);
+	if (ret)
+		goto out;
+	chip.ident = V4L2_IDENT_NONE;
+	chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
+	chip.match.addr = cam->sensor_addr;
+	ret = sensor_call(cam, core, g_chip_ident, &chip);
+	if (ret)
+		goto out;
+	cam->sensor_type = chip.ident;
+	if (cam->sensor_type != V4L2_IDENT_OV7670) {
+		cam_err(cam, "Unsupported sensor type 0x%x", cam->sensor_type);
+		ret = -EINVAL;
+		goto out;
+	}
+/* Get/set parameters? */
+	ret = 0;
+	cam->state = S_IDLE;
+out:
+	mcam_ctlr_power_down(cam);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+/*
+ * Configure the sensor to match the parameters we have.  Caller should
+ * hold s_mutex
+ */
+static int mcam_cam_set_flip(struct mcam_camera *cam)
+{
+	struct v4l2_control ctrl;
+
+	memset(&ctrl, 0, sizeof(ctrl));
+	ctrl.id = V4L2_CID_VFLIP;
+	ctrl.value = flip;
+	return sensor_call(cam, core, s_ctrl, &ctrl);
+}
+
+
+static int mcam_cam_configure(struct mcam_camera *cam)
+{
+	struct v4l2_mbus_framefmt mbus_fmt;
+	int ret;
+
+	v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code);
+	ret = sensor_call(cam, core, init, 0);
+	if (ret == 0)
+		ret = sensor_call(cam, video, s_mbus_fmt, &mbus_fmt);
+	/*
+	 * OV7670 does weird things if flip is set *before* format...
+	 */
+	ret += mcam_cam_set_flip(cam);
+	return ret;
+}
+
+/*
+ * Get everything ready, and start grabbing frames.
+ */
+static int mcam_read_setup(struct mcam_camera *cam)
+{
+	int ret;
+	unsigned long flags;
+
+	/*
+	 * Configuration.  If we still don't have DMA buffers,
+	 * make one last, desperate attempt.
+	 */
+	if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 &&
+			mcam_alloc_dma_bufs(cam, 0))
+		return -ENOMEM;
+
+	if (mcam_needs_config(cam)) {
+		mcam_cam_configure(cam);
+		ret = mcam_ctlr_configure(cam);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Turn it loose.
+	 */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	mcam_reset_buffers(cam);
+	mcam_ctlr_irq_enable(cam);
+	cam->state = S_STREAMING;
+	mcam_ctlr_start(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+/*
+ * Videobuf2 interface code.
+ */
+
+static int mcam_vb_queue_setup(struct vb2_queue *vq, unsigned int *nbufs,
+		unsigned int *num_planes, unsigned long sizes[],
+		void *alloc_ctxs[])
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+	int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2;
+
+	sizes[0] = cam->pix_format.sizeimage;
+	*num_planes = 1; /* Someday we have to support planar formats... */
+	if (*nbufs < minbufs)
+		*nbufs = minbufs;
+	if (cam->buffer_mode == B_DMA_contig)
+		alloc_ctxs[0] = cam->vb_alloc_ctx;
+	return 0;
+}
+
+
+static void mcam_vb_buf_queue(struct vb2_buffer *vb)
+{
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned long flags;
+	int start;
+
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers);
+	list_add(&mvb->queue, &cam->buffers);
+	if (test_bit(CF_SG_RESTART, &cam->flags))
+		mcam_sg_restart(cam);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	if (start)
+		mcam_read_setup(cam);
+}
+
+
+/*
+ * vb2 uses these to release the mutex when waiting in dqbuf.  I'm
+ * not actually sure we need to do this (I'm not sure that vb2_dqbuf() needs
+ * to be called with the mutex held), but better safe than sorry.
+ */
+static void mcam_vb_wait_prepare(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+
+	mutex_unlock(&cam->s_mutex);
+}
+
+static void mcam_vb_wait_finish(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+
+	mutex_lock(&cam->s_mutex);
+}
+
+/*
+ * These need to be called with the mutex held from vb2
+ */
+static int mcam_vb_start_streaming(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+
+	if (cam->state != S_IDLE)
+		return -EINVAL;
+	cam->sequence = 0;
+	/*
+	 * Videobuf2 sneakily hoards all the buffers and won't
+	 * give them to us until *after* streaming starts.  But
+	 * we can't actually start streaming until we have a
+	 * destination.  So go into a wait state and hope they
+	 * give us buffers soon.
+	 */
+	if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) {
+		cam->state = S_BUFWAIT;
+		return 0;
+	}
+	return mcam_read_setup(cam);
+}
+
+static int mcam_vb_stop_streaming(struct vb2_queue *vq)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vq);
+	unsigned long flags;
+
+	if (cam->state == S_BUFWAIT) {
+		/* They never gave us buffers */
+		cam->state = S_IDLE;
+		return 0;
+	}
+	if (cam->state != S_STREAMING)
+		return -EINVAL;
+	mcam_ctlr_stop_dma(cam);
+	/*
+	 * VB2 reclaims the buffers, so we need to forget
+	 * about them.
+	 */
+	spin_lock_irqsave(&cam->dev_lock, flags);
+	INIT_LIST_HEAD(&cam->buffers);
+	spin_unlock_irqrestore(&cam->dev_lock, flags);
+	return 0;
+}
+
+
+static const struct vb2_ops mcam_vb2_ops = {
+	.queue_setup		= mcam_vb_queue_setup,
+	.buf_queue		= mcam_vb_buf_queue,
+	.start_streaming	= mcam_vb_start_streaming,
+	.stop_streaming		= mcam_vb_stop_streaming,
+	.wait_prepare		= mcam_vb_wait_prepare,
+	.wait_finish		= mcam_vb_wait_finish,
+};
+
+
+#ifdef MCAM_MODE_DMA_SG
+/*
+ * Scatter/gather mode uses all of the above functions plus a
+ * few extras to deal with DMA mapping.
+ */
+static int mcam_vb_sg_buf_init(struct vb2_buffer *vb)
+{
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1;
+
+	mvb->dma_desc = dma_alloc_coherent(cam->dev,
+			ndesc * sizeof(struct mcam_dma_desc),
+			&mvb->dma_desc_pa, GFP_KERNEL);
+	if (mvb->dma_desc == NULL) {
+		cam_err(cam, "Unable to get DMA descriptor array\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int mcam_vb_sg_buf_prepare(struct vb2_buffer *vb)
+{
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0);
+	struct mcam_dma_desc *desc = mvb->dma_desc;
+	struct scatterlist *sg;
+	int i;
+
+	mvb->dma_desc_nent = dma_map_sg(cam->dev, sgd->sglist, sgd->num_pages,
+			DMA_FROM_DEVICE);
+	if (mvb->dma_desc_nent <= 0)
+		return -EIO;  /* Not sure what's right here */
+	for_each_sg(sgd->sglist, sg, mvb->dma_desc_nent, i) {
+		desc->dma_addr = sg_dma_address(sg);
+		desc->segment_len = sg_dma_len(sg);
+		desc++;
+	}
+	return 0;
+}
+
+static int mcam_vb_sg_buf_finish(struct vb2_buffer *vb)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	struct vb2_dma_sg_desc *sgd = vb2_dma_sg_plane_desc(vb, 0);
+
+	dma_unmap_sg(cam->dev, sgd->sglist, sgd->num_pages, DMA_FROM_DEVICE);
+	return 0;
+}
+
+static void mcam_vb_sg_buf_cleanup(struct vb2_buffer *vb)
+{
+	struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue);
+	struct mcam_vb_buffer *mvb = vb_to_mvb(vb);
+	int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1;
+
+	dma_free_coherent(cam->dev, ndesc * sizeof(struct mcam_dma_desc),
+			mvb->dma_desc, mvb->dma_desc_pa);
+}
+
+
+static const struct vb2_ops mcam_vb2_sg_ops = {
+	.queue_setup		= mcam_vb_queue_setup,
+	.buf_init		= mcam_vb_sg_buf_init,
+	.buf_prepare		= mcam_vb_sg_buf_prepare,
+	.buf_queue		= mcam_vb_buf_queue,
+	.buf_finish		= mcam_vb_sg_buf_finish,
+	.buf_cleanup		= mcam_vb_sg_buf_cleanup,
+	.start_streaming	= mcam_vb_start_streaming,
+	.stop_streaming		= mcam_vb_stop_streaming,
+	.wait_prepare		= mcam_vb_wait_prepare,
+	.wait_finish		= mcam_vb_wait_finish,
+};
+
+#endif /* MCAM_MODE_DMA_SG */
+
+static int mcam_setup_vb2(struct mcam_camera *cam)
+{
+	struct vb2_queue *vq = &cam->vb_queue;
+
+	memset(vq, 0, sizeof(*vq));
+	vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	vq->drv_priv = cam;
+	INIT_LIST_HEAD(&cam->buffers);
+	switch (cam->buffer_mode) {
+	case B_DMA_contig:
+#ifdef MCAM_MODE_DMA_CONTIG
+		vq->ops = &mcam_vb2_ops;
+		vq->mem_ops = &vb2_dma_contig_memops;
+		cam->vb_alloc_ctx = vb2_dma_contig_init_ctx(cam->dev);
+		vq->io_modes = VB2_MMAP | VB2_USERPTR;
+		cam->dma_setup = mcam_ctlr_dma_contig;
+		cam->frame_complete = mcam_dma_contig_done;
+#endif
+		break;
+	case B_DMA_sg:
+#ifdef MCAM_MODE_DMA_SG
+		vq->ops = &mcam_vb2_sg_ops;
+		vq->mem_ops = &vb2_dma_sg_memops;
+		vq->io_modes = VB2_MMAP | VB2_USERPTR;
+		cam->dma_setup = mcam_ctlr_dma_sg;
+		cam->frame_complete = mcam_dma_sg_done;
+#endif
+		break;
+	case B_vmalloc:
+#ifdef MCAM_MODE_VMALLOC
+		tasklet_init(&cam->s_tasklet, mcam_frame_tasklet,
+				(unsigned long) cam);
+		vq->ops = &mcam_vb2_ops;
+		vq->mem_ops = &vb2_vmalloc_memops;
+		vq->buf_struct_size = sizeof(struct mcam_vb_buffer);
+		vq->io_modes = VB2_MMAP;
+		cam->dma_setup = mcam_ctlr_dma_vmalloc;
+		cam->frame_complete = mcam_vmalloc_done;
+#endif
+		break;
+	}
+	return vb2_queue_init(vq);
+}
+
+static void mcam_cleanup_vb2(struct mcam_camera *cam)
+{
+	vb2_queue_release(&cam->vb_queue);
+#ifdef MCAM_MODE_DMA_CONTIG
+	if (cam->buffer_mode == B_DMA_contig)
+		vb2_dma_contig_cleanup_ctx(cam->vb_alloc_ctx);
+#endif
+}
+
+
+/* ---------------------------------------------------------------------- */
+/*
+ * The long list of V4L2 ioctl() operations.
+ */
+
+static int mcam_vidioc_streamon(struct file *filp, void *priv,
+		enum v4l2_buf_type type)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_streamon(&cam->vb_queue, type);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_streamoff(struct file *filp, void *priv,
+		enum v4l2_buf_type type)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_streamoff(&cam->vb_queue, type);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_reqbufs(struct file *filp, void *priv,
+		struct v4l2_requestbuffers *req)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_reqbufs(&cam->vb_queue, req);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_querybuf(struct file *filp, void *priv,
+		struct v4l2_buffer *buf)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_querybuf(&cam->vb_queue, buf);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static int mcam_vidioc_qbuf(struct file *filp, void *priv,
+		struct v4l2_buffer *buf)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_qbuf(&cam->vb_queue, buf);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static int mcam_vidioc_dqbuf(struct file *filp, void *priv,
+		struct v4l2_buffer *buf)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_dqbuf(&cam->vb_queue, buf, filp->f_flags & O_NONBLOCK);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+
+static int mcam_vidioc_queryctrl(struct file *filp, void *priv,
+		struct v4l2_queryctrl *qc)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, core, queryctrl, qc);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_g_ctrl(struct file *filp, void *priv,
+		struct v4l2_control *ctrl)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, core, g_ctrl, ctrl);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_s_ctrl(struct file *filp, void *priv,
+		struct v4l2_control *ctrl)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, core, s_ctrl, ctrl);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_vidioc_querycap(struct file *file, void *priv,
+		struct v4l2_capability *cap)
+{
+	strcpy(cap->driver, "marvell_ccic");
+	strcpy(cap->card, "marvell_ccic");
+	cap->version = 1;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+
+static int mcam_vidioc_enum_fmt_vid_cap(struct file *filp,
+		void *priv, struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index >= N_MCAM_FMTS)
+		return -EINVAL;
+	strlcpy(fmt->description, mcam_formats[fmt->index].desc,
+			sizeof(fmt->description));
+	fmt->pixelformat = mcam_formats[fmt->index].pixelformat;
+	return 0;
+}
+
+static int mcam_vidioc_try_fmt_vid_cap(struct file *filp, void *priv,
+		struct v4l2_format *fmt)
+{
+	struct mcam_camera *cam = priv;
+	struct mcam_format_struct *f;
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	struct v4l2_mbus_framefmt mbus_fmt;
+	int ret;
+
+	f = mcam_find_format(pix->pixelformat);
+	pix->pixelformat = f->pixelformat;
+	v4l2_fill_mbus_format(&mbus_fmt, pix, f->mbus_code);
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, try_mbus_fmt, &mbus_fmt);
+	mutex_unlock(&cam->s_mutex);
+	v4l2_fill_pix_format(pix, &mbus_fmt);
+	pix->bytesperline = pix->width * f->bpp;
+	pix->sizeimage = pix->height * pix->bytesperline;
+	return ret;
+}
+
+static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv,
+		struct v4l2_format *fmt)
+{
+	struct mcam_camera *cam = priv;
+	struct mcam_format_struct *f;
+	int ret;
+
+	/*
+	 * Can't do anything if the device is not idle
+	 * Also can't if there are streaming buffers in place.
+	 */
+	if (cam->state != S_IDLE || cam->vb_queue.num_buffers > 0)
+		return -EBUSY;
+
+	f = mcam_find_format(fmt->fmt.pix.pixelformat);
+
+	/*
+	 * See if the formatting works in principle.
+	 */
+	ret = mcam_vidioc_try_fmt_vid_cap(filp, priv, fmt);
+	if (ret)
+		return ret;
+	/*
+	 * Now we start to change things for real, so let's do it
+	 * under lock.
+	 */
+	mutex_lock(&cam->s_mutex);
+	cam->pix_format = fmt->fmt.pix;
+	cam->mbus_code = f->mbus_code;
+
+	/*
+	 * Make sure we have appropriate DMA buffers.
+	 */
+	if (cam->buffer_mode == B_vmalloc) {
+		ret = mcam_check_dma_buffers(cam);
+		if (ret)
+			goto out;
+	}
+	mcam_set_config_needed(cam, 1);
+	ret = 0;
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+/*
+ * Return our stored notion of how the camera is/should be configured.
+ * The V4l2 spec wants us to be smarter, and actually get this from
+ * the camera (and not mess with it at open time).  Someday.
+ */
+static int mcam_vidioc_g_fmt_vid_cap(struct file *filp, void *priv,
+		struct v4l2_format *f)
+{
+	struct mcam_camera *cam = priv;
+
+	f->fmt.pix = cam->pix_format;
+	return 0;
+}
+
+/*
+ * We only have one input - the sensor - so minimize the nonsense here.
+ */
+static int mcam_vidioc_enum_input(struct file *filp, void *priv,
+		struct v4l2_input *input)
+{
+	if (input->index != 0)
+		return -EINVAL;
+
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+	input->std = V4L2_STD_ALL; /* Not sure what should go here */
+	strcpy(input->name, "Camera");
+	return 0;
+}
+
+static int mcam_vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int mcam_vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+	if (i != 0)
+		return -EINVAL;
+	return 0;
+}
+
+/* from vivi.c */
+static int mcam_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a)
+{
+	return 0;
+}
+
+/*
+ * G/S_PARM.  Most of this is done by the sensor, but we are
+ * the level which controls the number of read buffers.
+ */
+static int mcam_vidioc_g_parm(struct file *filp, void *priv,
+		struct v4l2_streamparm *parms)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, g_parm, parms);
+	mutex_unlock(&cam->s_mutex);
+	parms->parm.capture.readbuffers = n_dma_bufs;
+	return ret;
+}
+
+static int mcam_vidioc_s_parm(struct file *filp, void *priv,
+		struct v4l2_streamparm *parms)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, s_parm, parms);
+	mutex_unlock(&cam->s_mutex);
+	parms->parm.capture.readbuffers = n_dma_bufs;
+	return ret;
+}
+
+static int mcam_vidioc_g_chip_ident(struct file *file, void *priv,
+		struct v4l2_dbg_chip_ident *chip)
+{
+	struct mcam_camera *cam = priv;
+
+	chip->ident = V4L2_IDENT_NONE;
+	chip->revision = 0;
+	if (v4l2_chip_match_host(&chip->match)) {
+		chip->ident = cam->chip_id;
+		return 0;
+	}
+	return sensor_call(cam, core, g_chip_ident, chip);
+}
+
+static int mcam_vidioc_enum_framesizes(struct file *filp, void *priv,
+		struct v4l2_frmsizeenum *sizes)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, enum_framesizes, sizes);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+static int mcam_vidioc_enum_frameintervals(struct file *filp, void *priv,
+		struct v4l2_frmivalenum *interval)
+{
+	struct mcam_camera *cam = priv;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = sensor_call(cam, video, enum_frameintervals, interval);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int mcam_vidioc_g_register(struct file *file, void *priv,
+		struct v4l2_dbg_register *reg)
+{
+	struct mcam_camera *cam = priv;
+
+	if (v4l2_chip_match_host(&reg->match)) {
+		reg->val = mcam_reg_read(cam, reg->reg);
+		reg->size = 4;
+		return 0;
+	}
+	return sensor_call(cam, core, g_register, reg);
+}
+
+static int mcam_vidioc_s_register(struct file *file, void *priv,
+		struct v4l2_dbg_register *reg)
+{
+	struct mcam_camera *cam = priv;
+
+	if (v4l2_chip_match_host(&reg->match)) {
+		mcam_reg_write(cam, reg->reg, reg->val);
+		return 0;
+	}
+	return sensor_call(cam, core, s_register, reg);
+}
+#endif
+
+static const struct v4l2_ioctl_ops mcam_v4l_ioctl_ops = {
+	.vidioc_querycap	= mcam_vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = mcam_vidioc_enum_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap	= mcam_vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap	= mcam_vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap	= mcam_vidioc_g_fmt_vid_cap,
+	.vidioc_enum_input	= mcam_vidioc_enum_input,
+	.vidioc_g_input		= mcam_vidioc_g_input,
+	.vidioc_s_input		= mcam_vidioc_s_input,
+	.vidioc_s_std		= mcam_vidioc_s_std,
+	.vidioc_reqbufs		= mcam_vidioc_reqbufs,
+	.vidioc_querybuf	= mcam_vidioc_querybuf,
+	.vidioc_qbuf		= mcam_vidioc_qbuf,
+	.vidioc_dqbuf		= mcam_vidioc_dqbuf,
+	.vidioc_streamon	= mcam_vidioc_streamon,
+	.vidioc_streamoff	= mcam_vidioc_streamoff,
+	.vidioc_queryctrl	= mcam_vidioc_queryctrl,
+	.vidioc_g_ctrl		= mcam_vidioc_g_ctrl,
+	.vidioc_s_ctrl		= mcam_vidioc_s_ctrl,
+	.vidioc_g_parm		= mcam_vidioc_g_parm,
+	.vidioc_s_parm		= mcam_vidioc_s_parm,
+	.vidioc_enum_framesizes = mcam_vidioc_enum_framesizes,
+	.vidioc_enum_frameintervals = mcam_vidioc_enum_frameintervals,
+	.vidioc_g_chip_ident	= mcam_vidioc_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	= mcam_vidioc_g_register,
+	.vidioc_s_register	= mcam_vidioc_s_register,
+#endif
+};
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Our various file operations.
+ */
+static int mcam_v4l_open(struct file *filp)
+{
+	struct mcam_camera *cam = video_drvdata(filp);
+	int ret = 0;
+
+	filp->private_data = cam;
+
+	frames = singles = delivered = 0;
+	mutex_lock(&cam->s_mutex);
+	if (cam->users == 0) {
+		ret = mcam_setup_vb2(cam);
+		if (ret)
+			goto out;
+		mcam_ctlr_power_up(cam);
+		__mcam_cam_reset(cam);
+		mcam_set_config_needed(cam, 1);
+	}
+	(cam->users)++;
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_v4l_release(struct file *filp)
+{
+	struct mcam_camera *cam = filp->private_data;
+
+	cam_err(cam, "Release, %d frames, %d singles, %d delivered\n", frames,
+			singles, delivered);
+	mutex_lock(&cam->s_mutex);
+	(cam->users)--;
+	if (filp == cam->owner) {
+		mcam_ctlr_stop_dma(cam);
+		cam->owner = NULL;
+	}
+	if (cam->users == 0) {
+		mcam_cleanup_vb2(cam);
+		mcam_ctlr_power_down(cam);
+		if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read)
+			mcam_free_dma_bufs(cam);
+	}
+	mutex_unlock(&cam->s_mutex);
+	return 0;
+}
+
+static ssize_t mcam_v4l_read(struct file *filp,
+		char __user *buffer, size_t len, loff_t *pos)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_read(&cam->vb_queue, buffer, len, pos,
+			filp->f_flags & O_NONBLOCK);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+
+static unsigned int mcam_v4l_poll(struct file *filp,
+		struct poll_table_struct *pt)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_poll(&cam->vb_queue, filp, pt);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+static int mcam_v4l_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct mcam_camera *cam = filp->private_data;
+	int ret;
+
+	mutex_lock(&cam->s_mutex);
+	ret = vb2_mmap(&cam->vb_queue, vma);
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+}
+
+
+
+static const struct v4l2_file_operations mcam_v4l_fops = {
+	.owner = THIS_MODULE,
+	.open = mcam_v4l_open,
+	.release = mcam_v4l_release,
+	.read = mcam_v4l_read,
+	.poll = mcam_v4l_poll,
+	.mmap = mcam_v4l_mmap,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+
+/*
+ * This template device holds all of those v4l2 methods; we
+ * clone it for specific real devices.
+ */
+static struct video_device mcam_v4l_template = {
+	.name = "mcam",
+	.tvnorms = V4L2_STD_NTSC_M,
+	.current_norm = V4L2_STD_NTSC_M,  /* make mplayer happy */
+
+	.fops = &mcam_v4l_fops,
+	.ioctl_ops = &mcam_v4l_ioctl_ops,
+	.release = video_device_release_empty,
+};
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Interrupt handler stuff
+ */
+static void mcam_frame_complete(struct mcam_camera *cam, int frame)
+{
+	/*
+	 * Basic frame housekeeping.
+	 */
+	set_bit(frame, &cam->flags);
+	clear_bit(CF_DMA_ACTIVE, &cam->flags);
+	cam->next_buf = frame;
+	cam->buf_seq[frame] = ++(cam->sequence);
+	frames++;
+	/*
+	 * "This should never happen"
+	 */
+	if (cam->state != S_STREAMING)
+		return;
+	/*
+	 * Process the frame and set up the next one.
+	 */
+	cam->frame_complete(cam, frame);
+}
+
+
+/*
+ * The interrupt handler; this needs to be called from the
+ * platform irq handler with the lock held.
+ */
+int mccic_irq(struct mcam_camera *cam, unsigned int irqs)
+{
+	unsigned int frame, handled = 0;
+
+	mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */
+	/*
+	 * Handle any frame completions.  There really should
+	 * not be more than one of these, or we have fallen
+	 * far behind.
+	 *
+	 * When running in S/G mode, the frame number lacks any
+	 * real meaning - there's only one descriptor array - but
+	 * the controller still picks a different one to signal
+	 * each time.
+	 */
+	for (frame = 0; frame < cam->nbufs; frame++)
+		if (irqs & (IRQ_EOF0 << frame)) {
+			mcam_frame_complete(cam, frame);
+			handled = 1;
+		}
+	/*
+	 * If a frame starts, note that we have DMA active.  This
+	 * code assumes that we won't get multiple frame interrupts
+	 * at once; may want to rethink that.
+	 */
+	if (irqs & (IRQ_SOF0 | IRQ_SOF1 | IRQ_SOF2)) {
+		set_bit(CF_DMA_ACTIVE, &cam->flags);
+		handled = 1;
+		if (cam->buffer_mode == B_DMA_sg)
+			mcam_ctlr_stop(cam);
+	}
+	return handled;
+}
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Registration and such.
+ */
+static struct ov7670_config sensor_cfg = {
+	/*
+	 * Exclude QCIF mode, because it only captures a tiny portion
+	 * of the sensor FOV
+	 */
+	.min_width = 320,
+	.min_height = 240,
+};
+
+
+int mccic_register(struct mcam_camera *cam)
+{
+	struct i2c_board_info ov7670_info = {
+		.type = "ov7670",
+		.addr = 0x42 >> 1,
+		.platform_data = &sensor_cfg,
+	};
+	int ret;
+
+	/*
+	 * Validate the requested buffer mode.
+	 */
+	if (buffer_mode >= 0)
+		cam->buffer_mode = buffer_mode;
+	if (cam->buffer_mode == B_DMA_sg &&
+			cam->chip_id == V4L2_IDENT_CAFE) {
+		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, "
+			"attempting vmalloc mode instead\n");
+		cam->buffer_mode = B_vmalloc;
+	}
+	if (!mcam_buffer_mode_supported(cam->buffer_mode)) {
+		printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n",
+				cam->buffer_mode);
+		return -EINVAL;
+	}
+	/*
+	 * Register with V4L
+	 */
+	ret = v4l2_device_register(cam->dev, &cam->v4l2_dev);
+	if (ret)
+		return ret;
+
+	mutex_init(&cam->s_mutex);
+	cam->state = S_NOTREADY;
+	mcam_set_config_needed(cam, 1);
+	cam->pix_format = mcam_def_pix_format;
+	cam->mbus_code = mcam_def_mbus_code;
+	INIT_LIST_HEAD(&cam->buffers);
+	mcam_ctlr_init(cam);
+
+	/*
+	 * Try to find the sensor.
+	 */
+	sensor_cfg.clock_speed = cam->clock_speed;
+	sensor_cfg.use_smbus = cam->use_smbus;
+	cam->sensor_addr = ov7670_info.addr;
+	cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev,
+			cam->i2c_adapter, &ov7670_info, NULL);
+	if (cam->sensor == NULL) {
+		ret = -ENODEV;
+		goto out_unregister;
+	}
+
+	ret = mcam_cam_init(cam);
+	if (ret)
+		goto out_unregister;
+	/*
+	 * Get the v4l2 setup done.
+	 */
+	mutex_lock(&cam->s_mutex);
+	cam->vdev = mcam_v4l_template;
+	cam->vdev.debug = 0;
+	cam->vdev.v4l2_dev = &cam->v4l2_dev;
+	ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1);
+	if (ret)
+		goto out;
+	video_set_drvdata(&cam->vdev, cam);
+
+	/*
+	 * If so requested, try to get our DMA buffers now.
+	 */
+	if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) {
+		if (mcam_alloc_dma_bufs(cam, 1))
+			cam_warn(cam, "Unable to alloc DMA buffers at load"
+					" will try again later.");
+	}
+
+out:
+	mutex_unlock(&cam->s_mutex);
+	return ret;
+out_unregister:
+	v4l2_device_unregister(&cam->v4l2_dev);
+	return ret;
+}
+
+
+void mccic_shutdown(struct mcam_camera *cam)
+{
+	/*
+	 * If we have no users (and we really, really should have no
+	 * users) the device will already be powered down.  Trying to
+	 * take it down again will wedge the machine, which is frowned
+	 * upon.
+	 */
+	if (cam->users > 0) {
+		cam_warn(cam, "Removing a device with users!\n");
+		mcam_ctlr_power_down(cam);
+	}
+	vb2_queue_release(&cam->vb_queue);
+	if (cam->buffer_mode == B_vmalloc)
+		mcam_free_dma_bufs(cam);
+	video_unregister_device(&cam->vdev);
+	v4l2_device_unregister(&cam->v4l2_dev);
+}
+
+/*
+ * Power management
+ */
+#ifdef CONFIG_PM
+
+void mccic_suspend(struct mcam_camera *cam)
+{
+	enum mcam_state cstate = cam->state;
+
+	mcam_ctlr_stop_dma(cam);
+	mcam_ctlr_power_down(cam);
+	cam->state = cstate;
+}
+
+int mccic_resume(struct mcam_camera *cam)
+{
+	int ret = 0;
+
+	mutex_lock(&cam->s_mutex);
+	if (cam->users > 0) {
+		mcam_ctlr_power_up(cam);
+		__mcam_cam_reset(cam);
+	} else {
+		mcam_ctlr_power_down(cam);
+	}
+	mutex_unlock(&cam->s_mutex);
+
+	set_bit(CF_CONFIG_NEEDED, &cam->flags);
+	if (cam->state == S_STREAMING)
+		ret = mcam_read_setup(cam);
+	return ret;
+}
+#endif /* CONFIG_PM */
diff --git a/drivers/media/video/marvell-ccic/mcam-core.h b/drivers/media/video/marvell-ccic/mcam-core.h
new file mode 100644
index 00000000000..917200e6325
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/mcam-core.h
@@ -0,0 +1,323 @@
+/*
+ * Marvell camera core structures.
+ *
+ * Copyright 2011 Jonathan Corbet corbet@lwn.net
+ */
+#ifndef _MCAM_CORE_H
+#define _MCAM_CORE_H
+
+#include <linux/list.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf2-core.h>
+
+/*
+ * Create our own symbols for the supported buffer modes, but, for now,
+ * base them entirely on which videobuf2 options have been selected.
+ */
+#if defined(CONFIG_VIDEOBUF2_VMALLOC) || defined(CONFIG_VIDEOBUF2_VMALLOC_MODULE)
+#define MCAM_MODE_VMALLOC 1
+#endif
+
+#if defined(CONFIG_VIDEOBUF2_DMA_CONTIG) || defined(CONFIG_VIDEOBUF2_DMA_CONTIG_MODULE)
+#define MCAM_MODE_DMA_CONTIG 1
+#endif
+
+#if defined(CONFIG_VIDEOBUF2_DMA_SG) || defined(CONFIG_VIDEOBUF2_DMA_SG_MODULE)
+#define MCAM_MODE_DMA_SG 1
+#endif
+
+#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \
+	!defined(MCAM_MODE_DMA_SG)
+#error One of the videobuf buffer modes must be selected in the config
+#endif
+
+
+enum mcam_state {
+	S_NOTREADY,	/* Not yet initialized */
+	S_IDLE,		/* Just hanging around */
+	S_FLAKED,	/* Some sort of problem */
+	S_STREAMING,	/* Streaming data */
+	S_BUFWAIT	/* streaming requested but no buffers yet */
+};
+#define MAX_DMA_BUFS 3
+
+/*
+ * Different platforms work best with different buffer modes, so we
+ * let the platform pick.
+ */
+enum mcam_buffer_mode {
+	B_vmalloc = 0,
+	B_DMA_contig = 1,
+	B_DMA_sg = 2
+};
+
+/*
+ * Is a given buffer mode supported by the current kernel configuration?
+ */
+static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
+{
+	switch (mode) {
+#ifdef MCAM_MODE_VMALLOC
+	case B_vmalloc:
+#endif
+#ifdef MCAM_MODE_DMA_CONTIG
+	case B_DMA_contig:
+#endif
+#ifdef MCAM_MODE_DMA_SG
+	case B_DMA_sg:
+#endif
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+
+/*
+ * A description of one of our devices.
+ * Locking: controlled by s_mutex.  Certain fields, however, require
+ *          the dev_lock spinlock; they are marked as such by comments.
+ *          dev_lock is also required for access to device registers.
+ */
+struct mcam_camera {
+	/*
+	 * These fields should be set by the platform code prior to
+	 * calling mcam_register().
+	 */
+	struct i2c_adapter *i2c_adapter;
+	unsigned char __iomem *regs;
+	spinlock_t dev_lock;
+	struct device *dev; /* For messages, dma alloc */
+	unsigned int chip_id;
+	short int clock_speed;	/* Sensor clock speed, default 30 */
+	short int use_smbus;	/* SMBUS or straight I2c? */
+	enum mcam_buffer_mode buffer_mode;
+	/*
+	 * Callbacks from the core to the platform code.
+	 */
+	void (*plat_power_up) (struct mcam_camera *cam);
+	void (*plat_power_down) (struct mcam_camera *cam);
+
+	/*
+	 * Everything below here is private to the mcam core and
+	 * should not be touched by the platform code.
+	 */
+	struct v4l2_device v4l2_dev;
+	enum mcam_state state;
+	unsigned long flags;		/* Buffer status, mainly (dev_lock) */
+	int users;			/* How many open FDs */
+	struct file *owner;		/* Who has data access (v4l2) */
+
+	/*
+	 * Subsystem structures.
+	 */
+	struct video_device vdev;
+	struct v4l2_subdev *sensor;
+	unsigned short sensor_addr;
+
+	/* Videobuf2 stuff */
+	struct vb2_queue vb_queue;
+	struct list_head buffers;	/* Available frames */
+
+	unsigned int nbufs;		/* How many are alloc'd */
+	int next_buf;			/* Next to consume (dev_lock) */
+
+	/* DMA buffers - vmalloc mode */
+#ifdef MCAM_MODE_VMALLOC
+	unsigned int dma_buf_size;	/* allocated size */
+	void *dma_bufs[MAX_DMA_BUFS];	/* Internal buffer addresses */
+	dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
+	struct tasklet_struct s_tasklet;
+#endif
+	unsigned int sequence;		/* Frame sequence number */
+	unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */
+
+	/* DMA buffers - DMA modes */
+	struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS];
+	struct vb2_alloc_ctx *vb_alloc_ctx;
+
+	/* Mode-specific ops, set at open time */
+	void (*dma_setup)(struct mcam_camera *cam);
+	void (*frame_complete)(struct mcam_camera *cam, int frame);
+
+	/* Current operating parameters */
+	u32 sensor_type;		/* Currently ov7670 only */
+	struct v4l2_pix_format pix_format;
+	enum v4l2_mbus_pixelcode mbus_code;
+
+	/* Locks */
+	struct mutex s_mutex; /* Access to this structure */
+};
+
+
+/*
+ * Register I/O functions.  These are here because the platform code
+ * may legitimately need to mess with the register space.
+ */
+/*
+ * Device register I/O
+ */
+static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg,
+		unsigned int val)
+{
+	iowrite32(val, cam->regs + reg);
+}
+
+static inline unsigned int mcam_reg_read(struct mcam_camera *cam,
+		unsigned int reg)
+{
+	return ioread32(cam->regs + reg);
+}
+
+
+static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg,
+		unsigned int val, unsigned int mask)
+{
+	unsigned int v = mcam_reg_read(cam, reg);
+
+	v = (v & ~mask) | (val & mask);
+	mcam_reg_write(cam, reg, v);
+}
+
+static inline void mcam_reg_clear_bit(struct mcam_camera *cam,
+		unsigned int reg, unsigned int val)
+{
+	mcam_reg_write_mask(cam, reg, 0, val);
+}
+
+static inline void mcam_reg_set_bit(struct mcam_camera *cam,
+		unsigned int reg, unsigned int val)
+{
+	mcam_reg_write_mask(cam, reg, val, val);
+}
+
+/*
+ * Functions for use by platform code.
+ */
+int mccic_register(struct mcam_camera *cam);
+int mccic_irq(struct mcam_camera *cam, unsigned int irqs);
+void mccic_shutdown(struct mcam_camera *cam);
+#ifdef CONFIG_PM
+void mccic_suspend(struct mcam_camera *cam);
+int mccic_resume(struct mcam_camera *cam);
+#endif
+
+/*
+ * Register definitions for the m88alp01 camera interface.  Offsets in bytes
+ * as given in the spec.
+ */
+#define REG_Y0BAR	0x00
+#define REG_Y1BAR	0x04
+#define REG_Y2BAR	0x08
+/* ... */
+
+#define REG_IMGPITCH	0x24	/* Image pitch register */
+#define   IMGP_YP_SHFT	  2		/* Y pitch params */
+#define   IMGP_YP_MASK	  0x00003ffc	/* Y pitch field */
+#define	  IMGP_UVP_SHFT	  18		/* UV pitch (planar) */
+#define   IMGP_UVP_MASK   0x3ffc0000
+#define REG_IRQSTATRAW	0x28	/* RAW IRQ Status */
+#define   IRQ_EOF0	  0x00000001	/* End of frame 0 */
+#define   IRQ_EOF1	  0x00000002	/* End of frame 1 */
+#define   IRQ_EOF2	  0x00000004	/* End of frame 2 */
+#define   IRQ_SOF0	  0x00000008	/* Start of frame 0 */
+#define   IRQ_SOF1	  0x00000010	/* Start of frame 1 */
+#define   IRQ_SOF2	  0x00000020	/* Start of frame 2 */
+#define   IRQ_OVERFLOW	  0x00000040	/* FIFO overflow */
+#define   IRQ_TWSIW	  0x00010000	/* TWSI (smbus) write */
+#define   IRQ_TWSIR	  0x00020000	/* TWSI read */
+#define   IRQ_TWSIE	  0x00040000	/* TWSI error */
+#define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
+#define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
+#define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
+#define REG_IRQMASK	0x2c	/* IRQ mask - same bits as IRQSTAT */
+#define REG_IRQSTAT	0x30	/* IRQ status / clear */
+
+#define REG_IMGSIZE	0x34	/* Image size */
+#define  IMGSZ_V_MASK	  0x1fff0000
+#define  IMGSZ_V_SHIFT	  16
+#define	 IMGSZ_H_MASK	  0x00003fff
+#define REG_IMGOFFSET	0x38	/* IMage offset */
+
+#define REG_CTRL0	0x3c	/* Control 0 */
+#define   C0_ENABLE	  0x00000001	/* Makes the whole thing go */
+
+/* Mask for all the format bits */
+#define   C0_DF_MASK	  0x00fffffc    /* Bits 2-23 */
+
+/* RGB ordering */
+#define	  C0_RGB4_RGBX	  0x00000000
+#define	  C0_RGB4_XRGB	  0x00000004
+#define	  C0_RGB4_BGRX	  0x00000008
+#define	  C0_RGB4_XBGR	  0x0000000c
+#define	  C0_RGB5_RGGB	  0x00000000
+#define	  C0_RGB5_GRBG	  0x00000004
+#define	  C0_RGB5_GBRG	  0x00000008
+#define	  C0_RGB5_BGGR	  0x0000000c
+
+/* Spec has two fields for DIN and DOUT, but they must match, so
+   combine them here. */
+#define	  C0_DF_YUV	  0x00000000	/* Data is YUV	    */
+#define	  C0_DF_RGB	  0x000000a0	/* ... RGB		    */
+#define	  C0_DF_BAYER	  0x00000140	/* ... Bayer		    */
+/* 8-8-8 must be missing from the below - ask */
+#define	  C0_RGBF_565	  0x00000000
+#define	  C0_RGBF_444	  0x00000800
+#define	  C0_RGB_BGR	  0x00001000	/* Blue comes first */
+#define	  C0_YUV_PLANAR	  0x00000000	/* YUV 422 planar format */
+#define	  C0_YUV_PACKED	  0x00008000	/* YUV 422 packed	*/
+#define	  C0_YUV_420PL	  0x0000a000	/* YUV 420 planar	*/
+/* Think that 420 packed must be 111 - ask */
+#define	  C0_YUVE_YUYV	  0x00000000	/* Y1CbY0Cr		*/
+#define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb		*/
+#define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0		*/
+#define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0		*/
+#define	  C0_YUVE_XYUV	  0x00000000	/* 420: .YUV		*/
+#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU		*/
+#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY		*/
+#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY		*/
+/* Bayer bits 18,19 if needed */
+#define	  C0_HPOL_LOW	  0x01000000	/* HSYNC polarity active low */
+#define	  C0_VPOL_LOW	  0x02000000	/* VSYNC polarity active low */
+#define	  C0_VCLK_LOW	  0x04000000	/* VCLK on falling edge */
+#define	  C0_DOWNSCALE	  0x08000000	/* Enable downscaler */
+#define	  C0_SIFM_MASK	  0xc0000000	/* SIF mode bits */
+#define	  C0_SIF_HVSYNC	  0x00000000	/* Use H/VSYNC */
+#define	  CO_SOF_NOSYNC	  0x40000000	/* Use inband active signaling */
+
+/* Bits below C1_444ALPHA are not present in Cafe */
+#define REG_CTRL1	0x40	/* Control 1 */
+#define	  C1_CLKGATE	  0x00000001	/* Sensor clock gate */
+#define   C1_DESC_ENA	  0x00000100	/* DMA descriptor enable */
+#define   C1_DESC_3WORD   0x00000200	/* Three-word descriptors used */
+#define	  C1_444ALPHA	  0x00f00000	/* Alpha field in RGB444 */
+#define	  C1_ALPHA_SHFT	  20
+#define	  C1_DMAB32	  0x00000000	/* 32-byte DMA burst */
+#define	  C1_DMAB16	  0x02000000	/* 16-byte DMA burst */
+#define	  C1_DMAB64	  0x04000000	/* 64-byte DMA burst */
+#define	  C1_DMAB_MASK	  0x06000000
+#define	  C1_TWOBUFS	  0x08000000	/* Use only two DMA buffers */
+#define	  C1_PWRDWN	  0x10000000	/* Power down */
+
+#define REG_CLKCTRL	0x88	/* Clock control */
+#define	  CLK_DIV_MASK	  0x0000ffff	/* Upper bits RW "reserved" */
+
+/* This appears to be a Cafe-only register */
+#define REG_UBAR	0xc4	/* Upper base address register */
+
+/* Armada 610 DMA descriptor registers */
+#define	REG_DMA_DESC_Y	0x200
+#define	REG_DMA_DESC_U	0x204
+#define	REG_DMA_DESC_V	0x208
+#define REG_DESC_LEN_Y	0x20c	/* Lengths are in bytes */
+#define	REG_DESC_LEN_U	0x210
+#define REG_DESC_LEN_V	0x214
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH	640
+#define VGA_HEIGHT	480
+
+#endif /* _MCAM_CORE_H */
diff --git a/drivers/media/video/marvell-ccic/mmp-driver.c b/drivers/media/video/marvell-ccic/mmp-driver.c
new file mode 100644
index 00000000000..d6b76454137
--- /dev/null
+++ b/drivers/media/video/marvell-ccic/mmp-driver.c
@@ -0,0 +1,340 @@
+/*
+ * Support for the camera device found on Marvell MMP processors; known
+ * to work with the Armada 610 as used in the OLPC 1.75 system.
+ *
+ * Copyright 2011 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/mmp-camera.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+
+#include "mcam-core.h"
+
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
+MODULE_LICENSE("GPL");
+
+struct mmp_camera {
+	void *power_regs;
+	struct platform_device *pdev;
+	struct mcam_camera mcam;
+	struct list_head devlist;
+	int irq;
+};
+
+static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam)
+{
+	return container_of(mcam, struct mmp_camera, mcam);
+}
+
+/*
+ * A silly little infrastructure so we can keep track of our devices.
+ * Chances are that we will never have more than one of them, but
+ * the Armada 610 *does* have two controllers...
+ */
+
+static LIST_HEAD(mmpcam_devices);
+static struct mutex mmpcam_devices_lock;
+
+static void mmpcam_add_device(struct mmp_camera *cam)
+{
+	mutex_lock(&mmpcam_devices_lock);
+	list_add(&cam->devlist, &mmpcam_devices);
+	mutex_unlock(&mmpcam_devices_lock);
+}
+
+static void mmpcam_remove_device(struct mmp_camera *cam)
+{
+	mutex_lock(&mmpcam_devices_lock);
+	list_del(&cam->devlist);
+	mutex_unlock(&mmpcam_devices_lock);
+}
+
+/*
+ * Platform dev remove passes us a platform_device, and there's
+ * no handy unused drvdata to stash a backpointer in.  So just
+ * dig it out of our list.
+ */
+static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev)
+{
+	struct mmp_camera *cam;
+
+	mutex_lock(&mmpcam_devices_lock);
+	list_for_each_entry(cam, &mmpcam_devices, devlist) {
+		if (cam->pdev == pdev) {
+			mutex_unlock(&mmpcam_devices_lock);
+			return cam;
+		}
+	}
+	mutex_unlock(&mmpcam_devices_lock);
+	return NULL;
+}
+
+
+
+
+/*
+ * Power-related registers; this almost certainly belongs
+ * somewhere else.
+ *
+ * ARMADA 610 register manual, sec 7.2.1, p1842.
+ */
+#define CPU_SUBSYS_PMU_BASE	0xd4282800
+#define REG_CCIC_DCGCR		0x28	/* CCIC dyn clock gate ctrl reg */
+#define REG_CCIC_CRCR		0x50	/* CCIC clk reset ctrl reg	*/
+
+/*
+ * Power control.
+ */
+static void mmpcam_power_up(struct mcam_camera *mcam)
+{
+	struct mmp_camera *cam = mcam_to_cam(mcam);
+	struct mmp_camera_platform_data *pdata;
+/*
+ * Turn on power and clocks to the controller.
+ */
+	iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR);
+	iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR);
+	mdelay(1);
+/*
+ * Provide power to the sensor.
+ */
+	mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002);
+	pdata = cam->pdev->dev.platform_data;
+	gpio_set_value(pdata->sensor_power_gpio, 1);
+	mdelay(5);
+	mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000);
+	gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */
+	mdelay(5);
+	gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */
+	mdelay(5);
+}
+
+static void mmpcam_power_down(struct mcam_camera *mcam)
+{
+	struct mmp_camera *cam = mcam_to_cam(mcam);
+	struct mmp_camera_platform_data *pdata;
+/*
+ * Turn off clocks and set reset lines
+ */
+	iowrite32(0, cam->power_regs + REG_CCIC_DCGCR);
+	iowrite32(0, cam->power_regs + REG_CCIC_CRCR);
+/*
+ * Shut down the sensor.
+ */
+	pdata = cam->pdev->dev.platform_data;
+	gpio_set_value(pdata->sensor_power_gpio, 0);
+	gpio_set_value(pdata->sensor_reset_gpio, 0);
+}
+
+
+static irqreturn_t mmpcam_irq(int irq, void *data)
+{
+	struct mcam_camera *mcam = data;
+	unsigned int irqs, handled;
+
+	spin_lock(&mcam->dev_lock);
+	irqs = mcam_reg_read(mcam, REG_IRQSTAT);
+	handled = mccic_irq(mcam, irqs);
+	spin_unlock(&mcam->dev_lock);
+	return IRQ_RETVAL(handled);
+}
+
+
+static int mmpcam_probe(struct platform_device *pdev)
+{
+	struct mmp_camera *cam;
+	struct mcam_camera *mcam;
+	struct resource *res;
+	struct mmp_camera_platform_data *pdata;
+	int ret;
+
+	cam = kzalloc(sizeof(*cam), GFP_KERNEL);
+	if (cam == NULL)
+		return -ENOMEM;
+	cam->pdev = pdev;
+	INIT_LIST_HEAD(&cam->devlist);
+
+	mcam = &cam->mcam;
+	mcam->platform = MHP_Armada610;
+	mcam->plat_power_up = mmpcam_power_up;
+	mcam->plat_power_down = mmpcam_power_down;
+	mcam->dev = &pdev->dev;
+	mcam->use_smbus = 0;
+	mcam->chip_id = V4L2_IDENT_ARMADA610;
+	mcam->buffer_mode = B_DMA_sg;
+	spin_lock_init(&mcam->dev_lock);
+	/*
+	 * Get our I/O memory.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no iomem resource!\n");
+		ret = -ENODEV;
+		goto out_free;
+	}
+	mcam->regs = ioremap(res->start, resource_size(res));
+	if (mcam->regs == NULL) {
+		dev_err(&pdev->dev, "MMIO ioremap fail\n");
+		ret = -ENODEV;
+		goto out_free;
+	}
+	/*
+	 * Power/clock memory is elsewhere; get it too.  Perhaps this
+	 * should really be managed outside of this driver?
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no power resource!\n");
+		ret = -ENODEV;
+		goto out_unmap1;
+	}
+	cam->power_regs = ioremap(res->start, resource_size(res));
+	if (cam->power_regs == NULL) {
+		dev_err(&pdev->dev, "power MMIO ioremap fail\n");
+		ret = -ENODEV;
+		goto out_unmap1;
+	}
+	/*
+	 * Find the i2c adapter.  This assumes, of course, that the
+	 * i2c bus is already up and functioning.
+	 */
+	pdata = pdev->dev.platform_data;
+	mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device);
+	if (mcam->i2c_adapter == NULL) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "No i2c adapter\n");
+		goto out_unmap2;
+	}
+	/*
+	 * Sensor GPIO pins.
+	 */
+	ret = gpio_request(pdata->sensor_power_gpio, "cam-power");
+	if (ret) {
+		dev_err(&pdev->dev, "Can't get sensor power gpio %d",
+				pdata->sensor_power_gpio);
+		goto out_unmap2;
+	}
+	gpio_direction_output(pdata->sensor_power_gpio, 0);
+	ret = gpio_request(pdata->sensor_reset_gpio, "cam-reset");
+	if (ret) {
+		dev_err(&pdev->dev, "Can't get sensor reset gpio %d",
+				pdata->sensor_reset_gpio);
+		goto out_gpio;
+	}
+	gpio_direction_output(pdata->sensor_reset_gpio, 0);
+	/*
+	 * Power the device up and hand it off to the core.
+	 */
+	mmpcam_power_up(mcam);
+	ret = mccic_register(mcam);
+	if (ret)
+		goto out_gpio2;
+	/*
+	 * Finally, set up our IRQ now that the core is ready to
+	 * deal with it.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		ret = -ENODEV;
+		goto out_unregister;
+	}
+	cam->irq = res->start;
+	ret = request_irq(cam->irq, mmpcam_irq, IRQF_SHARED,
+			"mmp-camera", mcam);
+	if (ret == 0) {
+		mmpcam_add_device(cam);
+		return 0;
+	}
+
+out_unregister:
+	mccic_shutdown(mcam);
+out_gpio2:
+	mmpcam_power_down(mcam);
+	gpio_free(pdata->sensor_reset_gpio);
+out_gpio:
+	gpio_free(pdata->sensor_power_gpio);
+out_unmap2:
+	iounmap(cam->power_regs);
+out_unmap1:
+	iounmap(mcam->regs);
+out_free:
+	kfree(cam);
+	return ret;
+}
+
+
+static int mmpcam_remove(struct mmp_camera *cam)
+{
+	struct mcam_camera *mcam = &cam->mcam;
+	struct mmp_camera_platform_data *pdata;
+
+	mmpcam_remove_device(cam);
+	free_irq(cam->irq, mcam);
+	mccic_shutdown(mcam);
+	mmpcam_power_down(mcam);
+	pdata = cam->pdev->dev.platform_data;
+	gpio_free(pdata->sensor_reset_gpio);
+	gpio_free(pdata->sensor_power_gpio);
+	iounmap(cam->power_regs);
+	iounmap(mcam->regs);
+	kfree(cam);
+	return 0;
+}
+
+static int mmpcam_platform_remove(struct platform_device *pdev)
+{
+	struct mmp_camera *cam = mmpcam_find_device(pdev);
+
+	if (cam == NULL)
+		return -ENODEV;
+	return mmpcam_remove(cam);
+}
+
+
+static struct platform_driver mmpcam_driver = {
+	.probe		= mmpcam_probe,
+	.remove		= mmpcam_platform_remove,
+	.driver = {
+		.name	= "mmp-camera",
+		.owner	= THIS_MODULE
+	}
+};
+
+
+static int __init mmpcam_init_module(void)
+{
+	mutex_init(&mmpcam_devices_lock);
+	return platform_driver_register(&mmpcam_driver);
+}
+
+static void __exit mmpcam_exit_module(void)
+{
+	platform_driver_unregister(&mmpcam_driver);
+	/*
+	 * platform_driver_unregister() should have emptied the list
+	 */
+	if (!list_empty(&mmpcam_devices))
+		printk(KERN_ERR "mmp_camera leaving devices behind\n");
+}
+
+module_init(mmpcam_init_module);
+module_exit(mmpcam_exit_module);
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index b03d74e09a3..166bf9349c1 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
-#include <linux/version.h>
 #include <linux/timer.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -35,7 +34,7 @@
 MODULE_DESCRIPTION("Virtual device for mem2mem framework testing");
 MODULE_AUTHOR("Pawel Osciak, <pawel@osciak.com>");
 MODULE_LICENSE("GPL");
-
+MODULE_VERSION("0.1.1");
 
 #define MIN_W 32
 #define MIN_H 32
@@ -380,7 +379,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strncpy(cap->driver, MEM2MEM_NAME, sizeof(cap->driver) - 1);
 	strncpy(cap->card, MEM2MEM_NAME, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
-	cap->version = KERNEL_VERSION(0, 1, 0);
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
 			  | V4L2_CAP_STREAMING;
 
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index e2bbd8c35c9..4da9cca939c 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -603,13 +603,9 @@ static int mt9m001_video_probe(struct soc_camera_device *icd,
 	unsigned long flags;
 	int ret;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/* Enable the chip */
 	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
@@ -675,8 +671,8 @@ static void mt9m001_video_remove(struct soc_camera_device *icd)
 {
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video removed: %p, %p\n",
-		icd->dev.parent, icd->vdev);
+	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
+		icd->parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index ebebed92962..a357aa889fc 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -63,6 +63,12 @@
 #define MT9M111_RESET_RESTART_FRAME	(1 << 1)
 #define MT9M111_RESET_RESET_MODE	(1 << 0)
 
+#define MT9M111_RM_FULL_POWER_RD	(0 << 10)
+#define MT9M111_RM_LOW_POWER_RD		(1 << 10)
+#define MT9M111_RM_COL_SKIP_4X		(1 << 5)
+#define MT9M111_RM_ROW_SKIP_4X		(1 << 4)
+#define MT9M111_RM_COL_SKIP_2X		(1 << 3)
+#define MT9M111_RM_ROW_SKIP_2X		(1 << 2)
 #define MT9M111_RMB_MIRROR_COLS		(1 << 1)
 #define MT9M111_RMB_MIRROR_ROWS		(1 << 0)
 #define MT9M111_CTXT_CTRL_RESTART	(1 << 15)
@@ -95,7 +101,8 @@
 
 #define MT9M111_OPMODE_AUTOEXPO_EN	(1 << 14)
 #define MT9M111_OPMODE_AUTOWHITEBAL_EN	(1 << 1)
-
+#define MT9M111_OUTFMT_FLIP_BAYER_COL	(1 << 9)
+#define MT9M111_OUTFMT_FLIP_BAYER_ROW	(1 << 8)
 #define MT9M111_OUTFMT_PROCESSED_BAYER	(1 << 14)
 #define MT9M111_OUTFMT_BYPASS_IFP	(1 << 10)
 #define MT9M111_OUTFMT_INV_PIX_CLOCK	(1 << 9)
@@ -110,9 +117,8 @@
 #define MT9M111_OUTFMT_TST_RAMP_FRAME	(3 << 4)
 #define MT9M111_OUTFMT_SHIFT_3_UP	(1 << 3)
 #define MT9M111_OUTFMT_AVG_CHROMA	(1 << 2)
-#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y	(1 << 1)
-#define MT9M111_OUTFMT_SWAP_RGB_EVEN	(1 << 1)
-#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr	(1 << 0)
+#define MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN	(1 << 1)
+#define MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B	(1 << 0)
 
 /*
  * Camera control register addresses (0x200..0x2ff not implemented)
@@ -122,6 +128,8 @@
 #define reg_write(reg, val) mt9m111_reg_write(client, MT9M111_##reg, (val))
 #define reg_set(reg, val) mt9m111_reg_set(client, MT9M111_##reg, (val))
 #define reg_clear(reg, val) mt9m111_reg_clear(client, MT9M111_##reg, (val))
+#define reg_mask(reg, val, mask) mt9m111_reg_mask(client, MT9M111_##reg, \
+		(val), (mask))
 
 #define MT9M111_MIN_DARK_ROWS	8
 #define MT9M111_MIN_DARK_COLS	26
@@ -153,7 +161,11 @@ static const struct mt9m111_datafmt mt9m111_colour_fmts[] = {
 	{V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG},
 	{V4L2_MBUS_FMT_VYUY8_2X8, V4L2_COLORSPACE_JPEG},
 	{V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_BGR565_2X8_LE, V4L2_COLORSPACE_SRGB},
+	{V4L2_MBUS_FMT_BGR565_2X8_BE, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
 	{V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_COLORSPACE_SRGB},
 };
@@ -169,6 +181,8 @@ struct mt9m111 {
 			 * from v4l2-chip-ident.h */
 	enum mt9m111_context context;
 	struct v4l2_rect rect;
+	struct mutex power_lock; /* lock to protect power_count */
+	int power_count;
 	const struct mt9m111_datafmt *fmt;
 	unsigned int gain;
 	unsigned char autoexposure;
@@ -176,10 +190,6 @@ struct mt9m111 {
 	unsigned int powered:1;
 	unsigned int hflip:1;
 	unsigned int vflip:1;
-	unsigned int swap_rgb_even_odd:1;
-	unsigned int swap_rgb_red_blue:1;
-	unsigned int swap_yuv_y_chromas:1;
-	unsigned int swap_yuv_cb_cr:1;
 	unsigned int autowhitebalance:1;
 };
 
@@ -248,12 +258,26 @@ static int mt9m111_reg_clear(struct i2c_client *client, const u16 reg,
 	int ret;
 
 	ret = mt9m111_reg_read(client, reg);
-	return mt9m111_reg_write(client, reg, ret & ~data);
+	if (ret >= 0)
+		ret = mt9m111_reg_write(client, reg, ret & ~data);
+	return ret;
 }
 
-static int mt9m111_set_context(struct i2c_client *client,
+static int mt9m111_reg_mask(struct i2c_client *client, const u16 reg,
+			    const u16 data, const u16 mask)
+{
+	int ret;
+
+	ret = mt9m111_reg_read(client, reg);
+	if (ret >= 0)
+		ret = mt9m111_reg_write(client, reg, (ret & ~mask) | data);
+	return ret;
+}
+
+static int mt9m111_set_context(struct mt9m111 *mt9m111,
 			       enum mt9m111_context ctxt)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int valB = MT9M111_CTXT_CTRL_RESTART | MT9M111_CTXT_CTRL_DEFECTCOR_B
 		| MT9M111_CTXT_CTRL_RESIZE_B | MT9M111_CTXT_CTRL_CTRL2_B
 		| MT9M111_CTXT_CTRL_GAMMA_B | MT9M111_CTXT_CTRL_READ_MODE_B
@@ -267,10 +291,10 @@ static int mt9m111_set_context(struct i2c_client *client,
 		return reg_write(CONTEXT_CONTROL, valA);
 }
 
-static int mt9m111_setup_rect(struct i2c_client *client,
+static int mt9m111_setup_rect(struct mt9m111 *mt9m111,
 			      struct v4l2_rect *rect)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret, is_raw_format;
 	int width = rect->width;
 	int height = rect->height;
@@ -312,81 +336,9 @@ static int mt9m111_setup_rect(struct i2c_client *client,
 	return ret;
 }
 
-static int mt9m111_setup_pixfmt(struct i2c_client *client, u16 outfmt)
+static int mt9m111_enable(struct mt9m111 *mt9m111)
 {
-	int ret;
-	u16 mask = MT9M111_OUTFMT_PROCESSED_BAYER | MT9M111_OUTFMT_RGB |
-		MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_SWAP_RGB_EVEN |
-		MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 |
-		MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr |
-		MT9M111_OUTFMT_SWAP_YCbCr_C_Y;
-
-	ret = reg_read(OUTPUT_FORMAT_CTRL2_A);
-	if (ret >= 0)
-		ret = reg_write(OUTPUT_FORMAT_CTRL2_A, (ret & ~mask) | outfmt);
-	if (!ret)
-		ret = reg_read(OUTPUT_FORMAT_CTRL2_B);
-	if (ret >= 0)
-		ret = reg_write(OUTPUT_FORMAT_CTRL2_B, (ret & ~mask) | outfmt);
-
-	return ret;
-}
-
-static int mt9m111_setfmt_bayer8(struct i2c_client *client)
-{
-	return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_PROCESSED_BAYER |
-				    MT9M111_OUTFMT_RGB);
-}
-
-static int mt9m111_setfmt_bayer10(struct i2c_client *client)
-{
-	return mt9m111_setup_pixfmt(client, MT9M111_OUTFMT_BYPASS_IFP);
-}
-
-static int mt9m111_setfmt_rgb565(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int val = 0;
-
-	if (mt9m111->swap_rgb_red_blue)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr;
-	if (mt9m111->swap_rgb_even_odd)
-		val |= MT9M111_OUTFMT_SWAP_RGB_EVEN;
-	val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565;
-
-	return mt9m111_setup_pixfmt(client, val);
-}
-
-static int mt9m111_setfmt_rgb555(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int val = 0;
-
-	if (mt9m111->swap_rgb_red_blue)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr;
-	if (mt9m111->swap_rgb_even_odd)
-		val |= MT9M111_OUTFMT_SWAP_RGB_EVEN;
-	val |= MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555;
-
-	return mt9m111_setup_pixfmt(client, val);
-}
-
-static int mt9m111_setfmt_yuv(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-	int val = 0;
-
-	if (mt9m111->swap_yuv_cb_cr)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr;
-	if (mt9m111->swap_yuv_y_chromas)
-		val |= MT9M111_OUTFMT_SWAP_YCbCr_C_Y;
-
-	return mt9m111_setup_pixfmt(client, val);
-}
-
-static int mt9m111_enable(struct i2c_client *client)
-{
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_CHIP_ENABLE);
@@ -395,8 +347,9 @@ static int mt9m111_enable(struct i2c_client *client)
 	return ret;
 }
 
-static int mt9m111_reset(struct i2c_client *client)
+static int mt9m111_reset(struct mt9m111 *mt9m111)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	ret = reg_set(RESET, MT9M111_RESET_RESET_MODE);
@@ -424,11 +377,9 @@ static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
 	return 0;
 }
 
-static int mt9m111_make_rect(struct i2c_client *client,
+static int mt9m111_make_rect(struct mt9m111 *mt9m111,
 			     struct v4l2_rect *rect)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
 	if (mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR8_1X8 ||
 	    mt9m111->fmt->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE) {
 		/* Bayer format - even size lengths */
@@ -444,14 +395,14 @@ static int mt9m111_make_rect(struct i2c_client *client,
 	soc_camera_limit_side(&rect->top, &rect->height,
 		     MT9M111_MIN_DARK_ROWS, 2, MT9M111_MAX_HEIGHT);
 
-	return mt9m111_setup_rect(client, rect);
+	return mt9m111_setup_rect(mt9m111, rect);
 }
 
 static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct v4l2_rect rect = a->c;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	int ret;
 
 	dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n",
@@ -460,7 +411,7 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	ret = mt9m111_make_rect(client, &rect);
+	ret = mt9m111_make_rect(mt9m111, &rect);
 	if (!ret)
 		mt9m111->rect = rect;
 	return ret;
@@ -468,8 +419,7 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 
 static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 
 	a->c	= mt9m111->rect;
 	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -496,8 +446,7 @@ static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 static int mt9m111_g_fmt(struct v4l2_subdev *sd,
 			 struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 
 	mf->width	= mt9m111->rect.width;
 	mf->height	= mt9m111->rect.height;
@@ -508,51 +457,73 @@ static int mt9m111_g_fmt(struct v4l2_subdev *sd,
 	return 0;
 }
 
-static int mt9m111_set_pixfmt(struct i2c_client *client,
+static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
 			      enum v4l2_mbus_pixelcode code)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
+	u16 data_outfmt2, mask_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER |
+		MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB |
+		MT9M111_OUTFMT_RGB565 | MT9M111_OUTFMT_RGB555 |
+		MT9M111_OUTFMT_RGB444x | MT9M111_OUTFMT_RGBx444 |
+		MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN |
+		MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 	int ret;
 
 	switch (code) {
 	case V4L2_MBUS_FMT_SBGGR8_1X8:
-		ret = mt9m111_setfmt_bayer8(client);
+		data_outfmt2 = MT9M111_OUTFMT_PROCESSED_BAYER |
+			MT9M111_OUTFMT_RGB;
 		break;
 	case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE:
-		ret = mt9m111_setfmt_bayer10(client);
+		data_outfmt2 = MT9M111_OUTFMT_BYPASS_IFP | MT9M111_OUTFMT_RGB;
 		break;
 	case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
-		ret = mt9m111_setfmt_rgb555(client);
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555 |
+			MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN;
+		break;
+	case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB555;
 		break;
 	case V4L2_MBUS_FMT_RGB565_2X8_LE:
-		ret = mt9m111_setfmt_rgb565(client);
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 |
+			MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN;
+		break;
+	case V4L2_MBUS_FMT_RGB565_2X8_BE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565;
+		break;
+	case V4L2_MBUS_FMT_BGR565_2X8_BE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 |
+			MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
+		break;
+	case V4L2_MBUS_FMT_BGR565_2X8_LE:
+		data_outfmt2 = MT9M111_OUTFMT_RGB | MT9M111_OUTFMT_RGB565 |
+			MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN |
+			MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 		break;
 	case V4L2_MBUS_FMT_UYVY8_2X8:
-		mt9m111->swap_yuv_y_chromas = 0;
-		mt9m111->swap_yuv_cb_cr = 0;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = 0;
 		break;
 	case V4L2_MBUS_FMT_VYUY8_2X8:
-		mt9m111->swap_yuv_y_chromas = 0;
-		mt9m111->swap_yuv_cb_cr = 1;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 		break;
 	case V4L2_MBUS_FMT_YUYV8_2X8:
-		mt9m111->swap_yuv_y_chromas = 1;
-		mt9m111->swap_yuv_cb_cr = 0;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN;
 		break;
 	case V4L2_MBUS_FMT_YVYU8_2X8:
-		mt9m111->swap_yuv_y_chromas = 1;
-		mt9m111->swap_yuv_cb_cr = 1;
-		ret = mt9m111_setfmt_yuv(client);
+		data_outfmt2 = MT9M111_OUTFMT_SWAP_YCbCr_C_Y_RGB_EVEN |
+			MT9M111_OUTFMT_SWAP_YCbCr_Cb_Cr_RGB_R_B;
 		break;
 	default:
-		dev_err(&client->dev, "Pixel format not handled : %x\n",
-			code);
-		ret = -EINVAL;
+		dev_err(&client->dev, "Pixel format not handled: %x\n", code);
+		return -EINVAL;
 	}
 
+	ret = reg_mask(OUTPUT_FORMAT_CTRL2_A, data_outfmt2,
+		       mask_outfmt2);
+	if (!ret)
+		ret = reg_mask(OUTPUT_FORMAT_CTRL2_B, data_outfmt2,
+			       mask_outfmt2);
+
 	return ret;
 }
 
@@ -561,7 +532,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd,
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	const struct mt9m111_datafmt *fmt;
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	struct v4l2_rect rect = {
 		.left	= mt9m111->rect.left,
 		.top	= mt9m111->rect.top,
@@ -579,9 +550,9 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd,
 		"%s code=%x left=%d, top=%d, width=%d, height=%d\n", __func__,
 		mf->code, rect.left, rect.top, rect.width, rect.height);
 
-	ret = mt9m111_make_rect(client, &rect);
+	ret = mt9m111_make_rect(mt9m111, &rect);
 	if (!ret)
-		ret = mt9m111_set_pixfmt(client, mf->code);
+		ret = mt9m111_set_pixfmt(mt9m111, mf->code);
 	if (!ret) {
 		mt9m111->rect	= rect;
 		mt9m111->fmt	= fmt;
@@ -594,8 +565,7 @@ static int mt9m111_s_fmt(struct v4l2_subdev *sd,
 static int mt9m111_try_fmt(struct v4l2_subdev *sd,
 			   struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	const struct mt9m111_datafmt *fmt;
 	bool bayer = mf->code == V4L2_MBUS_FMT_SBGGR8_1X8 ||
 		mf->code == V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE;
@@ -635,7 +605,7 @@ static int mt9m111_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *id)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 
 	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
 		return -EINVAL;
@@ -726,21 +696,16 @@ static const struct v4l2_queryctrl mt9m111_controls[] = {
 	}
 };
 
-static int mt9m111_resume(struct soc_camera_device *icd);
-static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state);
-
 static struct soc_camera_ops mt9m111_ops = {
-	.suspend		= mt9m111_suspend,
-	.resume			= mt9m111_resume,
 	.query_bus_param	= mt9m111_query_bus_param,
 	.set_bus_param		= mt9m111_set_bus_param,
 	.controls		= mt9m111_controls,
 	.num_controls		= ARRAY_SIZE(mt9m111_controls),
 };
 
-static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask)
+static int mt9m111_set_flip(struct mt9m111 *mt9m111, int flip, int mask)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	if (mt9m111->context == HIGHPOWER) {
@@ -758,8 +723,9 @@ static int mt9m111_set_flip(struct i2c_client *client, int flip, int mask)
 	return ret;
 }
 
-static int mt9m111_get_global_gain(struct i2c_client *client)
+static int mt9m111_get_global_gain(struct mt9m111 *mt9m111)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int data;
 
 	data = reg_read(GLOBAL_GAIN);
@@ -769,9 +735,9 @@ static int mt9m111_get_global_gain(struct i2c_client *client)
 	return data;
 }
 
-static int mt9m111_set_global_gain(struct i2c_client *client, int gain)
+static int mt9m111_set_global_gain(struct mt9m111 *mt9m111, int gain)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	u16 val;
 
 	if (gain > 63 * 2 * 2)
@@ -788,9 +754,9 @@ static int mt9m111_set_global_gain(struct i2c_client *client, int gain)
 	return reg_write(GLOBAL_GAIN, val);
 }
 
-static int mt9m111_set_autoexposure(struct i2c_client *client, int on)
+static int mt9m111_set_autoexposure(struct mt9m111 *mt9m111, int on)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	if (on)
@@ -804,9 +770,9 @@ static int mt9m111_set_autoexposure(struct i2c_client *client, int on)
 	return ret;
 }
 
-static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on)
+static int mt9m111_set_autowhitebalance(struct mt9m111 *mt9m111, int on)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	if (on)
@@ -823,7 +789,7 @@ static int mt9m111_set_autowhitebalance(struct i2c_client *client, int on)
 static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	int data;
 
 	switch (ctrl->id) {
@@ -848,7 +814,7 @@ static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 		ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS);
 		break;
 	case V4L2_CID_GAIN:
-		data = mt9m111_get_global_gain(client);
+		data = mt9m111_get_global_gain(mt9m111);
 		if (data < 0)
 			return data;
 		ctrl->value = data;
@@ -865,8 +831,7 @@ static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 
 static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
 	const struct v4l2_queryctrl *qctrl;
 	int ret;
 
@@ -877,22 +842,22 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
 		mt9m111->vflip = ctrl->value;
-		ret = mt9m111_set_flip(client, ctrl->value,
+		ret = mt9m111_set_flip(mt9m111, ctrl->value,
 					MT9M111_RMB_MIRROR_ROWS);
 		break;
 	case V4L2_CID_HFLIP:
 		mt9m111->hflip = ctrl->value;
-		ret = mt9m111_set_flip(client, ctrl->value,
+		ret = mt9m111_set_flip(mt9m111, ctrl->value,
 					MT9M111_RMB_MIRROR_COLS);
 		break;
 	case V4L2_CID_GAIN:
-		ret = mt9m111_set_global_gain(client, ctrl->value);
+		ret = mt9m111_set_global_gain(mt9m111, ctrl->value);
 		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ret =  mt9m111_set_autoexposure(client, ctrl->value);
+		ret =  mt9m111_set_autoexposure(mt9m111, ctrl->value);
 		break;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret =  mt9m111_set_autowhitebalance(client, ctrl->value);
+		ret =  mt9m111_set_autowhitebalance(mt9m111, ctrl->value);
 		break;
 	default:
 		ret = -EINVAL;
@@ -901,60 +866,52 @@ static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return ret;
 }
 
-static int mt9m111_suspend(struct soc_camera_device *icd, pm_message_t state)
+static int mt9m111_suspend(struct mt9m111 *mt9m111)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
-	mt9m111->gain = mt9m111_get_global_gain(client);
+	mt9m111->gain = mt9m111_get_global_gain(mt9m111);
 
 	return 0;
 }
 
-static int mt9m111_restore_state(struct i2c_client *client)
+static void mt9m111_restore_state(struct mt9m111 *mt9m111)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
-
-	mt9m111_set_context(client, mt9m111->context);
-	mt9m111_set_pixfmt(client, mt9m111->fmt->code);
-	mt9m111_setup_rect(client, &mt9m111->rect);
-	mt9m111_set_flip(client, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
-	mt9m111_set_flip(client, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
-	mt9m111_set_global_gain(client, mt9m111->gain);
-	mt9m111_set_autoexposure(client, mt9m111->autoexposure);
-	mt9m111_set_autowhitebalance(client, mt9m111->autowhitebalance);
-	return 0;
+	mt9m111_set_context(mt9m111, mt9m111->context);
+	mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code);
+	mt9m111_setup_rect(mt9m111, &mt9m111->rect);
+	mt9m111_set_flip(mt9m111, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
+	mt9m111_set_flip(mt9m111, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
+	mt9m111_set_global_gain(mt9m111, mt9m111->gain);
+	mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
+	mt9m111_set_autowhitebalance(mt9m111, mt9m111->autowhitebalance);
 }
 
-static int mt9m111_resume(struct soc_camera_device *icd)
+static int mt9m111_resume(struct mt9m111 *mt9m111)
 {
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
 	int ret = 0;
 
 	if (mt9m111->powered) {
-		ret = mt9m111_enable(client);
+		ret = mt9m111_enable(mt9m111);
 		if (!ret)
-			ret = mt9m111_reset(client);
+			ret = mt9m111_reset(mt9m111);
 		if (!ret)
-			ret = mt9m111_restore_state(client);
+			mt9m111_restore_state(mt9m111);
 	}
 	return ret;
 }
 
-static int mt9m111_init(struct i2c_client *client)
+static int mt9m111_init(struct mt9m111 *mt9m111)
 {
-	struct mt9m111 *mt9m111 = to_mt9m111(client);
+	struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
 	int ret;
 
 	mt9m111->context = HIGHPOWER;
-	ret = mt9m111_enable(client);
+	ret = mt9m111_enable(mt9m111);
 	if (!ret)
-		ret = mt9m111_reset(client);
+		ret = mt9m111_reset(mt9m111);
 	if (!ret)
-		ret = mt9m111_set_context(client, mt9m111->context);
+		ret = mt9m111_set_context(mt9m111, mt9m111->context);
 	if (!ret)
-		ret = mt9m111_set_autoexposure(client, mt9m111->autoexposure);
+		ret = mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
 	if (ret)
 		dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
 	return ret;
@@ -971,20 +928,13 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 	s32 data;
 	int ret;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	mt9m111->autoexposure = 1;
 	mt9m111->autowhitebalance = 1;
 
-	mt9m111->swap_rgb_even_odd = 1;
-	mt9m111->swap_rgb_red_blue = 1;
-
 	data = reg_read(CHIP_VERSION);
 
 	switch (data) {
@@ -1005,16 +955,51 @@ static int mt9m111_video_probe(struct soc_camera_device *icd,
 		goto ei2c;
 	}
 
-	ret = mt9m111_init(client);
+	ret = mt9m111_init(mt9m111);
 
 ei2c:
 	return ret;
 }
 
+static int mt9m111_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = 0;
+
+	mutex_lock(&mt9m111->power_lock);
+
+	/*
+	 * If the power count is modified from 0 to != 0 or from != 0 to 0,
+	 * update the power state.
+	 */
+	if (mt9m111->power_count == !on) {
+		if (on) {
+			ret = mt9m111_resume(mt9m111);
+			if (ret) {
+				dev_err(&client->dev,
+					"Failed to resume the sensor: %d\n", ret);
+				goto out;
+			}
+		} else {
+			mt9m111_suspend(mt9m111);
+		}
+	}
+
+	/* Update the power count. */
+	mt9m111->power_count += on ? 1 : -1;
+	WARN_ON(mt9m111->power_count < 0);
+
+out:
+	mutex_unlock(&mt9m111->power_lock);
+	return ret;
+}
+
 static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
 	.g_ctrl		= mt9m111_g_ctrl,
 	.s_ctrl		= mt9m111_s_ctrl,
 	.g_chip_ident	= mt9m111_g_chip_ident,
+	.s_power	= mt9m111_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9m111_g_register,
 	.s_register	= mt9m111_s_register,
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 7ce279c3751..30547cc3f89 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -700,8 +700,7 @@ static int mt9t031_runtime_suspend(struct device *dev)
 static int mt9t031_runtime_resume(struct device *dev)
 {
 	struct video_device *vdev = to_video_device(dev);
-	struct soc_camera_device *icd = container_of(vdev->parent,
-		struct soc_camera_device, dev);
+	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct mt9t031 *mt9t031 = to_mt9t031(client);
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index bffa9ee1096..d2e0a50063a 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -1057,13 +1057,9 @@ static int mt9t112_camera_probe(struct soc_camera_device *icd,
 	const char          *devname;
 	int                  chipid;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show chip ID
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 4904d25f689..893a8b8f514 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -54,11 +54,20 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = {
 		.type = V4L2_CTRL_TYPE_INTEGER,
 		.name = "Gain",
 		.minimum = 0,
-		.maximum = (1 << 10) - 1,
+		.maximum = (1 << 12) - 1 - 0x0020,
 		.step = 1,
 		.default_value = 0x0020,
 		.flags = 0,
 	}, {
+		.id = V4L2_CID_EXPOSURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Exposure",
+		.minimum = 0,
+		.maximum = 2047,
+		.step = 1,
+		.default_value = 0x01fc,
+		.flags = 0,
+	}, {
 		.id = V4L2_CID_RED_BALANCE,
 		.type = V4L2_CTRL_TYPE_INTEGER,
 		.name = "Red Balance",
@@ -105,7 +114,8 @@ struct mt9v011 {
 	unsigned hflip:1;
 	unsigned vflip:1;
 
-	u16 global_gain, red_bal, blue_bal;
+	u16 global_gain, exposure;
+	s16 red_bal, blue_bal;
 };
 
 static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
@@ -180,24 +190,68 @@ static const struct i2c_reg_value mt9v011_init_default[] = {
 		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
 };
 
+
+static u16 calc_mt9v011_gain(s16 lineargain)
+{
+
+	u16 digitalgain = 0;
+	u16 analogmult = 0;
+	u16 analoginit = 0;
+
+	if (lineargain < 0)
+		lineargain = 0;
+
+	/* recommended minimum */
+	lineargain += 0x0020;
+
+	if (lineargain > 2047)
+		lineargain = 2047;
+
+	if (lineargain > 1023) {
+		digitalgain = 3;
+		analogmult = 3;
+		analoginit = lineargain / 16;
+	} else if (lineargain > 511) {
+		digitalgain = 1;
+		analogmult = 3;
+		analoginit = lineargain / 8;
+	} else if (lineargain > 255) {
+		analogmult = 3;
+		analoginit = lineargain / 4;
+	} else if (lineargain > 127) {
+		analogmult = 1;
+		analoginit = lineargain / 2;
+	} else
+		analoginit = lineargain;
+
+	return analoginit + (analogmult << 7) + (digitalgain << 9);
+
+}
+
 static void set_balance(struct v4l2_subdev *sd)
 {
 	struct mt9v011 *core = to_mt9v011(sd);
-	u16 green1_gain, green2_gain, blue_gain, red_gain;
+	u16 green_gain, blue_gain, red_gain;
+	u16 exposure;
+	s16 bal;
 
-	green1_gain = core->global_gain;
-	green2_gain = core->global_gain;
+	exposure = core->exposure;
 
-	blue_gain = core->global_gain +
-		    core->global_gain * core->blue_bal / (1 << 9);
+	green_gain = calc_mt9v011_gain(core->global_gain);
 
-	red_gain = core->global_gain +
-		   core->global_gain * core->blue_bal / (1 << 9);
+	bal = core->global_gain;
+	bal += (core->blue_bal * core->global_gain / (1 << 7));
+	blue_gain = calc_mt9v011_gain(bal);
 
-	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
-	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN,  green1_gain);
+	bal = core->global_gain;
+	bal += (core->red_bal * core->global_gain / (1 << 7));
+	red_gain = calc_mt9v011_gain(bal);
+
+	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain);
+	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain);
 	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
 	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
+	mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure);
 }
 
 static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
@@ -286,7 +340,7 @@ static void set_res(struct v4l2_subdev *sd)
 	 * be missing.
 	 */
 
-	hstart = 14 + (640 - core->width) / 2;
+	hstart = 20 + (640 - core->width) / 2;
 	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
 	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
 	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
@@ -338,6 +392,9 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_GAIN:
 		ctrl->value = core->global_gain;
 		return 0;
+	case V4L2_CID_EXPOSURE:
+		ctrl->value = core->exposure;
+		return 0;
 	case V4L2_CID_RED_BALANCE:
 		ctrl->value = core->red_bal;
 		return 0;
@@ -392,6 +449,9 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	case V4L2_CID_GAIN:
 		core->global_gain = ctrl->value;
 		break;
+	case V4L2_CID_EXPOSURE:
+		core->exposure = ctrl->value;
+		break;
 	case V4L2_CID_RED_BALANCE:
 		core->red_bal = ctrl->value;
 		break;
@@ -598,6 +658,7 @@ static int mt9v011_probe(struct i2c_client *c,
 	}
 
 	core->global_gain = 0x0024;
+	core->exposure = 0x01fc;
 	core->width  = 640;
 	core->height = 480;
 	core->xtal = 27000000;	/* Hz */
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index fc76ed1c08e..51b0fccbfe7 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -728,9 +728,9 @@ static int mt9v022_video_probe(struct soc_camera_device *icd,
 	int ret;
 	unsigned long flags;
 
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/* Read out the chip version register */
 	data = reg_read(client, MT9V022_CHIP_VERSION);
@@ -809,8 +809,8 @@ static void mt9v022_video_remove(struct soc_camera_device *icd)
 {
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 
-	dev_dbg(&icd->dev, "Video removed: %p, %p\n",
-		icd->dev.parent, icd->vdev);
+	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
+		icd->parent, icd->vdev);
 	if (icl->free_bus)
 		icl->free_bus(icl);
 }
diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c
index 1319c2c48af..c64e1dc4cb4 100644
--- a/drivers/media/video/mt9v032.c
+++ b/drivers/media/video/mt9v032.c
@@ -31,14 +31,14 @@
 #define MT9V032_CHIP_VERSION				0x00
 #define		MT9V032_CHIP_ID_REV1			0x1311
 #define		MT9V032_CHIP_ID_REV3			0x1313
-#define MT9V032_ROW_START				0x01
-#define		MT9V032_ROW_START_MIN			4
-#define		MT9V032_ROW_START_DEF			10
-#define		MT9V032_ROW_START_MAX			482
-#define MT9V032_COLUMN_START				0x02
+#define MT9V032_COLUMN_START				0x01
 #define		MT9V032_COLUMN_START_MIN		1
-#define		MT9V032_COLUMN_START_DEF		2
+#define		MT9V032_COLUMN_START_DEF		1
 #define		MT9V032_COLUMN_START_MAX		752
+#define MT9V032_ROW_START				0x02
+#define		MT9V032_ROW_START_MIN			4
+#define		MT9V032_ROW_START_DEF			5
+#define		MT9V032_ROW_START_MAX			482
 #define MT9V032_WINDOW_HEIGHT				0x03
 #define		MT9V032_WINDOW_HEIGHT_MIN		1
 #define		MT9V032_WINDOW_HEIGHT_DEF		480
@@ -420,13 +420,13 @@ static int mt9v032_set_crop(struct v4l2_subdev *subdev,
 	struct v4l2_rect *__crop;
 	struct v4l2_rect rect;
 
-	/* Clamp the crop rectangle boundaries and align them to a multiple of 2
-	 * pixels.
+	/* Clamp the crop rectangle boundaries and align them to a non multiple
+	 * of 2 pixels to ensure a GRBG Bayer pattern.
 	 */
-	rect.left = clamp(ALIGN(crop->rect.left, 2),
+	rect.left = clamp(ALIGN(crop->rect.left + 1, 2) - 1,
 			  MT9V032_COLUMN_START_MIN,
 			  MT9V032_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(crop->rect.top, 2),
+	rect.top = clamp(ALIGN(crop->rect.top + 1, 2) - 1,
 			 MT9V032_ROW_START_MIN,
 			 MT9V032_ROW_START_MAX);
 	rect.width = clamp(ALIGN(crop->rect.width, 2),
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 63f8a0cc33d..087db12a3a6 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 
 #include <media/soc_camera.h>
@@ -73,7 +72,7 @@
 #define CSISR_SOF_INT		(1 << 16)
 #define CSISR_DRDY		(1 << 0)
 
-#define VERSION_CODE KERNEL_VERSION(0, 0, 1)
+#define DRIVER_VERSION "0.0.2"
 #define DRIVER_NAME "mx1-camera"
 
 #define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
@@ -142,7 +141,7 @@ static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
 		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
 
-	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
 
 	return 0;
 }
@@ -154,7 +153,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/*
@@ -179,7 +178,7 @@ static int mx1_videobuf_prepare(struct videobuf_queue *vq,
 	if (bytes_per_line < 0)
 		return bytes_per_line;
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/* Added list head initialization on alloc */
@@ -232,7 +231,7 @@ out:
 static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 {
 	struct videobuf_buffer *vbuf = &pcdev->active->vb;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 	int ret;
 
 	if (unlikely(!pcdev->active)) {
@@ -256,11 +255,11 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq,
 						struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	list_add_tail(&vb->queue, &pcdev->capture);
@@ -287,7 +286,7 @@ static void mx1_videobuf_release(struct videobuf_queue *vq,
 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 #ifdef DEBUG
 	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 
 	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
@@ -343,7 +342,7 @@ static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
 static void mx1_camera_dma_irq(int channel, void *data)
 {
 	struct mx1_camera_dev *pcdev = data;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 	struct mx1_buffer *buf;
 	struct videobuf_buffer *vb;
 	unsigned long flags;
@@ -378,10 +377,10 @@ static struct videobuf_queue_ops mx1_videobuf_ops = {
 static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 				     struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 
-	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent,
+	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->parent,
 				&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				V4L2_FIELD_NONE,
 				sizeof(struct mx1_buffer), icd, &icd->video_lock);
@@ -401,7 +400,7 @@ static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
 	 */
 	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
 
-	dev_dbg(pcdev->icd->dev.parent,
+	dev_dbg(pcdev->icd->parent,
 		"System clock %lukHz, target freq %dkHz, divisor %lu\n",
 		lcdclk / 1000, mclk / 1000, div);
 
@@ -412,7 +411,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 {
 	unsigned int csicr1 = CSICR1_EN;
 
-	dev_dbg(pcdev->icd->dev.parent, "Activate device\n");
+	dev_dbg(pcdev->icd->parent, "Activate device\n");
 
 	clk_enable(pcdev->clk);
 
@@ -428,7 +427,7 @@ static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 
 static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
 {
-	dev_dbg(pcdev->icd->dev.parent, "Deactivate device\n");
+	dev_dbg(pcdev->icd->parent, "Deactivate device\n");
 
 	/* Disable all CSI interface */
 	__raw_writel(0x00, pcdev->base + CSICR1);
@@ -442,13 +441,13 @@ static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
  */
 static int mx1_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 
 	if (pcdev->icd)
 		return -EBUSY;
 
-	dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "MX1 Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	mx1_camera_activate(pcdev);
@@ -460,7 +459,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd)
 
 static void mx1_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	unsigned int csicr1;
 
@@ -473,7 +472,7 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd)
 	/* Stop DMA engine */
 	imx_dma_disable(pcdev->dma_chan);
 
-	dev_info(icd->dev.parent, "MX1 Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "MX1 Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	mx1_camera_deactivate(pcdev);
@@ -491,7 +490,7 @@ static int mx1_camera_set_crop(struct soc_camera_device *icd,
 
 static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx1_camera_dev *pcdev = ici->priv;
 	unsigned long camera_flags, common_flags;
 	unsigned int csicr1;
@@ -562,14 +561,14 @@ static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
 
 	buswidth = xlate->host_fmt->bits_per_sample;
 	if (buswidth > 8) {
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "bits-per-sample %d for format %x unsupported\n",
 			 buswidth, pix->pixelformat);
 		return -EINVAL;
@@ -609,7 +608,7 @@ static int mx1_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
@@ -676,7 +675,6 @@ static int mx1_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the friendly caller:-> */
 	strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
-	cap->version = VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -883,4 +881,5 @@ module_exit(mx1_camera_exit);
 MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
 MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRIVER_VERSION);
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 4eab1c62031..ec2410c0c80 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/moduleparam.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
@@ -47,7 +46,7 @@
 #include <asm/dma.h>
 
 #define MX2_CAM_DRV_NAME "mx2-camera"
-#define MX2_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define MX2_CAM_VERSION "0.0.6"
 #define MX2_CAM_DRIVER_DESCRIPTION "i.MX2x_Camera"
 
 /* reset values */
@@ -278,7 +277,7 @@ static void mx2_camera_deactivate(struct mx2_camera_dev *pcdev)
  */
 static int mx2_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	int ret;
 	u32 csicr1;
@@ -303,7 +302,7 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_info(icd->dev.parent, "Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -311,12 +310,12 @@ static int mx2_camera_add_device(struct soc_camera_device *icd)
 
 static void mx2_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 
 	BUG_ON(icd != pcdev->icd);
 
-	dev_info(icd->dev.parent, "Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	mx2_camera_deactivate(pcdev);
@@ -437,7 +436,7 @@ static int mx2_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 			icd->current_fmt->host_fmt);
 
-	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
 
 	if (bytes_per_line < 0)
 		return bytes_per_line;
@@ -457,7 +456,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
 	struct soc_camera_device *icd = vq->priv_data;
 	struct videobuf_buffer *vb = &buf->vb;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	/*
@@ -467,7 +466,7 @@ static void free_buffer(struct videobuf_queue *vq, struct mx2_buffer *buf)
 	videobuf_waiton(vq, vb, 0, 0);
 
 	videobuf_dma_contig_free(vq, vb);
-	dev_dbg(&icd->dev, "%s freed\n", __func__);
+	dev_dbg(icd->parent, "%s freed\n", __func__);
 
 	vb->state = VIDEOBUF_NEEDS_INIT;
 }
@@ -481,7 +480,7 @@ static int mx2_videobuf_prepare(struct videobuf_queue *vq,
 			icd->current_fmt->host_fmt);
 	int ret = 0;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	if (bytes_per_line < 0)
@@ -533,12 +532,12 @@ static void mx2_videobuf_queue(struct videobuf_queue *vq,
 {
 	struct soc_camera_device *icd = vq->priv_data;
 	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->dev.parent);
+		to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
 	unsigned long flags;
 
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	spin_lock_irqsave(&pcdev->lock, flags);
@@ -611,27 +610,27 @@ static void mx2_videobuf_release(struct videobuf_queue *vq,
 				 struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	struct mx2_buffer *buf = container_of(vb, struct mx2_buffer, vb);
 	unsigned long flags;
 
 #ifdef DEBUG
-	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
 
 	switch (vb->state) {
 	case VIDEOBUF_ACTIVE:
-		dev_info(&icd->dev, "%s (active)\n", __func__);
+		dev_info(icd->parent, "%s (active)\n", __func__);
 		break;
 	case VIDEOBUF_QUEUED:
-		dev_info(&icd->dev, "%s (queued)\n", __func__);
+		dev_info(icd->parent, "%s (queued)\n", __func__);
 		break;
 	case VIDEOBUF_PREPARED:
-		dev_info(&icd->dev, "%s (prepared)\n", __func__);
+		dev_info(icd->parent, "%s (prepared)\n", __func__);
 		break;
 	default:
-		dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
+		dev_info(icd->parent, "%s (unknown) %d\n", __func__,
 				vb->state);
 		break;
 	}
@@ -678,7 +677,7 @@ static struct videobuf_queue_ops mx2_videobuf_ops = {
 static void mx2_camera_init_videobuf(struct videobuf_queue *q,
 			      struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 
 	videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
@@ -719,7 +718,7 @@ static void mx27_camera_emma_buf_init(struct soc_camera_device *icd,
 		int bytesperline)
 {
 	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->dev.parent);
+		to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 
 	writel(pcdev->discard_buffer_dma,
@@ -772,7 +771,7 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 		__u32 pixfmt)
 {
 	struct soc_camera_host *ici =
-		to_soc_camera_host(icd->dev.parent);
+		to_soc_camera_host(icd->parent);
 	struct mx2_camera_dev *pcdev = ici->priv;
 	unsigned long camera_flags, common_flags;
 	int ret = 0;
@@ -891,7 +890,7 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd,
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+	dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
 		mf.width, mf.height);
 
 	icd->user_width		= mf.width;
@@ -911,7 +910,7 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 				pix->pixelformat);
 		return -EINVAL;
 	}
@@ -951,7 +950,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (pixfmt && !xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -974,11 +973,16 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 		if (pix->bytesperline < 0)
 			return pix->bytesperline;
 		pix->sizeimage = pix->height * pix->bytesperline;
-		if (pix->sizeimage > (4 * 0x3ffff)) { /* CSIRXCNT limit */
-			dev_warn(icd->dev.parent,
-					"Image size (%u) above limit\n",
-					pix->sizeimage);
-			return -EINVAL;
+		/* Check against the CSIRXCNT limit */
+		if (pix->sizeimage > 4 * 0x3ffff) {
+			/* Adjust geometry, preserve aspect ratio */
+			unsigned int new_height = int_sqrt(4 * 0x3ffff *
+					pix->height / pix->bytesperline);
+			pix->width = new_height * pix->width / pix->height;
+			pix->height = new_height;
+			pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
+							xlate->host_fmt);
+			BUG_ON(pix->bytesperline < 0);
 		}
 	}
 
@@ -996,7 +1000,7 @@ static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 	if (mf.field == V4L2_FIELD_ANY)
 		mf.field = V4L2_FIELD_NONE;
 	if (mf.field != V4L2_FIELD_NONE) {
-		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+		dev_err(icd->parent, "Field type %d unsupported.\n",
 				mf.field);
 		return -EINVAL;
 	}
@@ -1014,7 +1018,6 @@ static int mx2_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the friendly caller:-> */
 	strlcpy(cap->card, MX2_CAM_DRIVER_DESCRIPTION, sizeof(cap->card));
-	cap->version = MX2_CAM_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1523,3 +1526,4 @@ module_exit(mx2_camera_exit);
 MODULE_DESCRIPTION("i.MX27/i.MX25 SoC Camera Host driver");
 MODULE_AUTHOR("Sascha Hauer <sha@pengutronix.de>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(MX2_CAM_VERSION);
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c7680eb8366..c045b47803a 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -11,7 +11,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -195,7 +194,7 @@ static int mx3_videobuf_setup(struct vb2_queue *vq,
 			unsigned long sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 						icd->current_fmt->host_fmt);
@@ -224,7 +223,7 @@ static int mx3_videobuf_setup(struct vb2_queue *vq,
 static int mx3_videobuf_prepare(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
 	struct scatterlist *sg;
@@ -242,7 +241,7 @@ static int mx3_videobuf_prepare(struct vb2_buffer *vb)
 	new_size = bytes_per_line * icd->user_height;
 
 	if (vb2_plane_size(vb, 0) < new_size) {
-		dev_err(icd->dev.parent, "Buffer too small (%lu < %zu)\n",
+		dev_err(icd->parent, "Buffer too small (%lu < %zu)\n",
 			vb2_plane_size(vb, 0), new_size);
 		return -ENOBUFS;
 	}
@@ -284,7 +283,7 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
 static void mx3_videobuf_queue(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct mx3_camera_buffer *buf = to_mx3_vb(vb);
 	struct dma_async_tx_descriptor *txd = buf->txd;
@@ -337,7 +336,7 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
 	spin_unlock_irq(&mx3_cam->lock);
 
 	cookie = txd->tx_submit(txd);
-	dev_dbg(icd->dev.parent, "Submitted cookie %d DMA 0x%08x\n",
+	dev_dbg(icd->parent, "Submitted cookie %d DMA 0x%08x\n",
 		cookie, sg_dma_address(&buf->sg));
 
 	if (cookie >= 0)
@@ -358,13 +357,13 @@ static void mx3_videobuf_queue(struct vb2_buffer *vb)
 static void mx3_videobuf_release(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct mx3_camera_buffer *buf = to_mx3_vb(vb);
 	struct dma_async_tx_descriptor *txd = buf->txd;
 	unsigned long flags;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 		"Release%s DMA 0x%08x, queue %sempty\n",
 		mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg),
 		list_empty(&buf->queue) ? "" : "not ");
@@ -403,7 +402,7 @@ static int mx3_videobuf_init(struct vb2_buffer *vb)
 static int mx3_stop_streaming(struct vb2_queue *q)
 {
 	struct soc_camera_device *icd = soc_camera_from_vb2q(q);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
 	struct dma_chan *chan;
@@ -499,7 +498,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
 
 	clk_enable(mx3_cam->clk);
 	rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk);
-	dev_dbg(icd->dev.parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
+	dev_dbg(icd->parent, "Set SENS_CONF to %x, rate %ld\n", conf, rate);
 	if (rate)
 		clk_set_rate(mx3_cam->clk, rate);
 }
@@ -507,7 +506,7 @@ static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam,
 /* Called with .video_lock held */
 static int mx3_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 
 	if (mx3_cam->icd)
@@ -517,7 +516,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 
 	mx3_cam->icd = icd;
 
-	dev_info(icd->dev.parent, "MX3 Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -526,7 +525,7 @@ static int mx3_camera_add_device(struct soc_camera_device *icd)
 /* Called with .video_lock held */
 static void mx3_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct idmac_channel **ichan = &mx3_cam->idmac_channel[0];
 
@@ -541,7 +540,7 @@ static void mx3_camera_remove_device(struct soc_camera_device *icd)
 
 	mx3_cam->icd = NULL;
 
-	dev_info(icd->dev.parent, "MX3 Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "MX3 Camera driver detached from camera %d\n",
 		 icd->devnum);
 }
 
@@ -608,12 +607,12 @@ static int test_platform_param(struct mx3_camera_dev *mx3_cam,
 static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 				    const unsigned int depth)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(mx3_cam, depth, &bus_flags);
 
-	dev_dbg(icd->dev.parent, "request bus width %d bit: %d\n", depth, ret);
+	dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
 
 	if (ret < 0)
 		return ret;
@@ -622,7 +621,7 @@ static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
 
 	ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
 	if (ret < 0)
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "Flags incompatible: camera %lx, host %lx\n",
 			 camera_flags, bus_flags);
 
@@ -676,7 +675,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	int formats = 0, ret;
 	enum v4l2_mbus_pixelcode code;
 	const struct soc_mbus_pixelfmt *fmt;
@@ -688,7 +687,7 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id
 
 	fmt = soc_mbus_get_fmtdesc(code);
 	if (!fmt) {
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "Unsupported format code #%u: %d\n", idx, code);
 		return 0;
 	}
@@ -816,7 +815,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
 	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct v4l2_mbus_framefmt mf;
@@ -849,7 +848,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 		configure_geometry(mx3_cam, mf.width, mf.height,
 				   icd->current_fmt->host_fmt);
 
-	dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+	dev_dbg(icd->parent, "Sensor cropped %dx%d\n",
 		mf.width, mf.height);
 
 	icd->user_width		= mf.width;
@@ -861,7 +860,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
@@ -871,13 +870,13 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n",
+		dev_warn(icd->parent, "Format %x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
 
 	stride_align(&pix->width);
-	dev_dbg(icd->dev.parent, "Set format %dx%d\n", pix->width, pix->height);
+	dev_dbg(icd->parent, "Set format %dx%d\n", pix->width, pix->height);
 
 	/*
 	 * Might have to perform a complete interface initialisation like in
@@ -913,13 +912,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
 	pix->colorspace		= mf.colorspace;
 	icd->current_fmt	= xlate;
 
-	pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
-						    xlate->host_fmt);
-	if (pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = pix->height * pix->bytesperline;
-
-	dev_dbg(icd->dev.parent, "Sensor set %dx%d\n", pix->width, pix->height);
+	dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height);
 
 	return ret;
 }
@@ -936,7 +929,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (pixfmt && !xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -946,12 +939,6 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	if (pix->width > 4096)
 		pix->width = 4096;
 
-	pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
-						    xlate->host_fmt);
-	if (pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = pix->height * pix->bytesperline;
-
 	/* limit to sensor capabilities */
 	mf.width	= pix->width;
 	mf.height	= pix->height;
@@ -974,7 +961,7 @@ static int mx3_camera_try_fmt(struct soc_camera_device *icd,
 	case V4L2_FIELD_NONE:
 		break;
 	default:
-		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+		dev_err(icd->parent, "Field type %d unsupported.\n",
 			mf.field);
 		ret = -EINVAL;
 	}
@@ -1000,7 +987,6 @@ static int mx3_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the firendly caller:-> */
 	strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card));
-	cap->version = KERNEL_VERSION(0, 2, 2);
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1008,7 +994,7 @@ static int mx3_camera_querycap(struct soc_camera_host *ici,
 
 static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct mx3_camera_dev *mx3_cam = ici->priv;
 	unsigned long bus_flags, camera_flags, common_flags;
 	u32 dw, sens_conf;
@@ -1016,7 +1002,7 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 	int buswidth;
 	int ret;
 	const struct soc_camera_format_xlate *xlate;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 
 	fmt = soc_mbus_get_fmtdesc(icd->current_fmt->code);
 	if (!fmt)
@@ -1325,4 +1311,5 @@ module_exit(mx3_camera_exit);
 MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.2.3");
 MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME);
diff --git a/drivers/media/video/omap/Kconfig b/drivers/media/video/omap/Kconfig
index e63233fd2aa..390ab094f9f 100644
--- a/drivers/media/video/omap/Kconfig
+++ b/drivers/media/video/omap/Kconfig
@@ -1,11 +1,14 @@
+config VIDEO_OMAP2_VOUT_VRFB
+	bool
+
 config VIDEO_OMAP2_VOUT
 	tristate "OMAP2/OMAP3 V4L2-Display driver"
 	depends on ARCH_OMAP2 || ARCH_OMAP3
 	select VIDEOBUF_GEN
 	select VIDEOBUF_DMA_CONTIG
 	select OMAP2_DSS
-	select OMAP2_VRAM
-	select OMAP2_VRFB
+	select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
+	select VIDEO_OMAP2_VOUT_VRFB if VIDEO_OMAP2_VOUT && OMAP2_VRFB
 	default n
 	---help---
 	  V4L2 Display driver support for OMAP2/3 based boards.
diff --git a/drivers/media/video/omap/Makefile b/drivers/media/video/omap/Makefile
index b28788070ae..fc410b438f7 100644
--- a/drivers/media/video/omap/Makefile
+++ b/drivers/media/video/omap/Makefile
@@ -4,4 +4,5 @@
 
 # OMAP2/3 Display driver
 omap-vout-y := omap_vout.o omap_voutlib.o
+omap-vout-$(CONFIG_VIDEO_OMAP2_VOUT_VRFB) += omap_vout_vrfb.o
 obj-$(CONFIG_VIDEO_OMAP2_VOUT) += omap-vout.o
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index a647894d3a7..b5ef3622244 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -35,28 +35,26 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/videodev2.h>
-#include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <media/videobuf-dma-contig.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 
 #include <plat/dma.h>
-#include <plat/vram.h>
 #include <plat/vrfb.h>
 #include <video/omapdss.h>
 
 #include "omap_voutlib.h"
 #include "omap_voutdef.h"
+#include "omap_vout_vrfb.h"
 
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("OMAP Video for Linux Video out driver");
 MODULE_LICENSE("GPL");
 
-
 /* Driver Configuration macros */
 #define VOUT_NAME		"omap_vout"
 
@@ -65,31 +63,6 @@ enum omap_vout_channels {
 	OMAP_VIDEO2,
 };
 
-enum dma_channel_state {
-	DMA_CHAN_NOT_ALLOTED,
-	DMA_CHAN_ALLOTED,
-};
-
-#define QQVGA_WIDTH		160
-#define QQVGA_HEIGHT		120
-
-/* Max Resolution supported by the driver */
-#define VID_MAX_WIDTH		1280	/* Largest width */
-#define VID_MAX_HEIGHT		720	/* Largest height */
-
-/* Mimimum requirement is 2x2 for DSS */
-#define VID_MIN_WIDTH		2
-#define VID_MIN_HEIGHT		2
-
-/* 2048 x 2048 is max res supported by OMAP display controller */
-#define MAX_PIXELS_PER_LINE     2048
-
-#define VRFB_TX_TIMEOUT         1000
-#define VRFB_NUM_BUFS		4
-
-/* Max buffer size tobe allocated during init */
-#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
-
 static struct videobuf_queue_ops video_vbq_ops;
 /* Variables configurable through module params*/
 static u32 video1_numbuffers = 3;
@@ -172,84 +145,6 @@ static const struct v4l2_fmtdesc omap_formats[] = {
 #define NUM_OUTPUT_FORMATS (ARRAY_SIZE(omap_formats))
 
 /*
- * Allocate buffers
- */
-static unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
-{
-	u32 order, size;
-	unsigned long virt_addr, addr;
-
-	size = PAGE_ALIGN(buf_size);
-	order = get_order(size);
-	virt_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, order);
-	addr = virt_addr;
-
-	if (virt_addr) {
-		while (size > 0) {
-			SetPageReserved(virt_to_page(addr));
-			addr += PAGE_SIZE;
-			size -= PAGE_SIZE;
-		}
-	}
-	*phys_addr = (u32) virt_to_phys((void *) virt_addr);
-	return virt_addr;
-}
-
-/*
- * Free buffers
- */
-static void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
-{
-	u32 order, size;
-	unsigned long addr = virtaddr;
-
-	size = PAGE_ALIGN(buf_size);
-	order = get_order(size);
-
-	while (size > 0) {
-		ClearPageReserved(virt_to_page(addr));
-		addr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	free_pages((unsigned long) virtaddr, order);
-}
-
-/*
- * Function for allocating video buffers
- */
-static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
-		unsigned int *count, int startindex)
-{
-	int i, j;
-
-	for (i = 0; i < *count; i++) {
-		if (!vout->smsshado_virt_addr[i]) {
-			vout->smsshado_virt_addr[i] =
-				omap_vout_alloc_buffer(vout->smsshado_size,
-						&vout->smsshado_phy_addr[i]);
-		}
-		if (!vout->smsshado_virt_addr[i] && startindex != -1) {
-			if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
-				break;
-		}
-		if (!vout->smsshado_virt_addr[i]) {
-			for (j = 0; j < i; j++) {
-				omap_vout_free_buffer(
-						vout->smsshado_virt_addr[j],
-						vout->smsshado_size);
-				vout->smsshado_virt_addr[j] = 0;
-				vout->smsshado_phy_addr[j] = 0;
-			}
-			*count = 0;
-			return -ENOMEM;
-		}
-		memset((void *) vout->smsshado_virt_addr[i], 0,
-				vout->smsshado_size);
-	}
-	return 0;
-}
-
-/*
  * Try format
  */
 static int omap_vout_try_format(struct v4l2_pix_format *pix)
@@ -342,73 +237,9 @@ static u32 omap_vout_uservirt_to_phys(u32 virtp)
 }
 
 /*
- * Wakes up the application once the DMA transfer to VRFB space is completed.
- */
-static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
-{
-	struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
-
-	t->tx_status = 1;
-	wake_up_interruptible(&t->wait);
-}
-
-/*
- * Release the VRFB context once the module exits
- */
-static void omap_vout_release_vrfb(struct omap_vout_device *vout)
-{
-	int i;
-
-	for (i = 0; i < VRFB_NUM_BUFS; i++)
-		omap_vrfb_release_ctx(&vout->vrfb_context[i]);
-
-	if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
-		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
-		omap_free_dma(vout->vrfb_dma_tx.dma_ch);
-	}
-}
-
-/*
- * Return true if rotation is 90 or 270
- */
-static inline int rotate_90_or_270(const struct omap_vout_device *vout)
-{
-	return (vout->rotation == dss_rotation_90_degree ||
-			vout->rotation == dss_rotation_270_degree);
-}
-
-/*
- * Return true if rotation is enabled
- */
-static inline int rotation_enabled(const struct omap_vout_device *vout)
-{
-	return vout->rotation || vout->mirror;
-}
-
-/*
- * Reverse the rotation degree if mirroring is enabled
- */
-static inline int calc_rotation(const struct omap_vout_device *vout)
-{
-	if (!vout->mirror)
-		return vout->rotation;
-
-	switch (vout->rotation) {
-	case dss_rotation_90_degree:
-		return dss_rotation_270_degree;
-	case dss_rotation_270_degree:
-		return dss_rotation_90_degree;
-	case dss_rotation_180_degree:
-		return dss_rotation_0_degree;
-	default:
-		return dss_rotation_180_degree;
-	}
-}
-
-/*
  * Free the V4L2 buffers
  */
-static void omap_vout_free_buffers(struct omap_vout_device *vout)
+void omap_vout_free_buffers(struct omap_vout_device *vout)
 {
 	int i, numbuffers;
 
@@ -425,52 +256,6 @@ static void omap_vout_free_buffers(struct omap_vout_device *vout)
 }
 
 /*
- * Free VRFB buffers
- */
-static void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
-{
-	int j;
-
-	for (j = 0; j < VRFB_NUM_BUFS; j++) {
-		omap_vout_free_buffer(vout->smsshado_virt_addr[j],
-				vout->smsshado_size);
-		vout->smsshado_virt_addr[j] = 0;
-		vout->smsshado_phy_addr[j] = 0;
-	}
-}
-
-/*
- * Allocate the buffers for the VRFB space.  Data is copied from V4L2
- * buffers to the VRFB buffers using the DMA engine.
- */
-static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
-			  unsigned int *count, unsigned int startindex)
-{
-	int i;
-	bool yuv_mode;
-
-	/* Allocate the VRFB buffers only if the buffers are not
-	 * allocated during init time.
-	 */
-	if ((rotation_enabled(vout)) && !vout->vrfb_static_allocation)
-		if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
-			return -ENOMEM;
-
-	if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
-			vout->dss_mode == OMAP_DSS_COLOR_UYVY)
-		yuv_mode = true;
-	else
-		yuv_mode = false;
-
-	for (i = 0; i < *count; i++)
-		omap_vrfb_setup(&vout->vrfb_context[i],
-				vout->smsshado_phy_addr[i], vout->pix.width,
-				vout->pix.height, vout->bpp, yuv_mode);
-
-	return 0;
-}
-
-/*
  * Convert V4L2 rotation to DSS rotation
  *	V4L2 understand 0, 90, 180, 270.
  *	Convert to 0, 1, 2 and 3 respectively for DSS
@@ -499,124 +284,38 @@ static int v4l2_rot_to_dss_rot(int v4l2_rotation,
 	return ret;
 }
 
-/*
- * Calculate the buffer offsets from which the streaming should
- * start. This offset calculation is mainly required because of
- * the VRFB 32 pixels alignment with rotation.
- */
 static int omap_vout_calculate_offset(struct omap_vout_device *vout)
 {
-	struct omap_overlay *ovl;
-	enum dss_rotation rotation;
 	struct omapvideo_info *ovid;
-	bool mirroring = vout->mirror;
-	struct omap_dss_device *cur_display;
 	struct v4l2_rect *crop = &vout->crop;
 	struct v4l2_pix_format *pix = &vout->pix;
 	int *cropped_offset = &vout->cropped_offset;
-	int vr_ps = 1, ps = 2, temp_ps = 2;
-	int offset = 0, ctop = 0, cleft = 0, line_length = 0;
+	int ps = 2, line_length = 0;
 
 	ovid = &vout->vid_info;
-	ovl = ovid->overlays[0];
-	/* get the display device attached to the overlay */
-	if (!ovl->manager || !ovl->manager->device)
-		return -1;
 
-	cur_display = ovl->manager->device;
-	rotation = calc_rotation(vout);
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		omap_vout_calculate_vrfb_offset(vout);
+	} else {
+		vout->line_length = line_length = pix->width;
 
-	if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
-			V4L2_PIX_FMT_UYVY == pix->pixelformat) {
-		if (rotation_enabled(vout)) {
-			/*
-			 * ps    - Actual pixel size for YUYV/UYVY for
-			 *         VRFB/Mirroring is 4 bytes
-			 * vr_ps - Virtually pixel size for YUYV/UYVY is
-			 *         2 bytes
-			 */
+		if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
+			V4L2_PIX_FMT_UYVY == pix->pixelformat)
+			ps = 2;
+		else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat)
 			ps = 4;
-			vr_ps = 2;
-		} else {
-			ps = 2;	/* otherwise the pixel size is 2 byte */
-		}
-	} else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
-		ps = 4;
-	} else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
-		ps = 3;
-	}
-	vout->ps = ps;
-	vout->vr_ps = vr_ps;
-
-	if (rotation_enabled(vout)) {
-		line_length = MAX_PIXELS_PER_LINE;
-		ctop = (pix->height - crop->height) - crop->top;
-		cleft = (pix->width - crop->width) - crop->left;
-	} else {
-		line_length = pix->width;
-	}
-	vout->line_length = line_length;
-	switch (rotation) {
-	case dss_rotation_90_degree:
-		offset = vout->vrfb_context[0].yoffset *
-			vout->vrfb_context[0].bytespp;
-		temp_ps = ps / vr_ps;
-		if (mirroring == 0) {
-			*cropped_offset = offset + line_length *
-				temp_ps * cleft + crop->top * temp_ps;
-		} else {
-			*cropped_offset = offset + line_length * temp_ps *
-				cleft + crop->top * temp_ps + (line_length *
-				((crop->width / (vr_ps)) - 1) * ps);
-		}
-		break;
-	case dss_rotation_180_degree:
-		offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset *
-			vout->vrfb_context[0].bytespp) +
-			(vout->vrfb_context[0].xoffset *
-			vout->vrfb_context[0].bytespp));
-		if (mirroring == 0) {
-			*cropped_offset = offset + (line_length * ps * ctop) +
-				(cleft / vr_ps) * ps;
+		else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat)
+			ps = 3;
 
-		} else {
-			*cropped_offset = offset + (line_length * ps * ctop) +
-				(cleft / vr_ps) * ps + (line_length *
-				(crop->height - 1) * ps);
-		}
-		break;
-	case dss_rotation_270_degree:
-		offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
-			vout->vrfb_context[0].bytespp;
-		temp_ps = ps / vr_ps;
-		if (mirroring == 0) {
-			*cropped_offset = offset + line_length *
-			    temp_ps * crop->left + ctop * ps;
-		} else {
-			*cropped_offset = offset + line_length *
-				temp_ps * crop->left + ctop * ps +
-				(line_length * ((crop->width / vr_ps) - 1) *
-				 ps);
-		}
-		break;
-	case dss_rotation_0_degree:
-		if (mirroring == 0) {
-			*cropped_offset = (line_length * ps) *
-				crop->top + (crop->left / vr_ps) * ps;
-		} else {
-			*cropped_offset = (line_length * ps) *
-				crop->top + (crop->left / vr_ps) * ps +
-				(line_length * (crop->height - 1) * ps);
-		}
-		break;
-	default:
-		*cropped_offset = (line_length * ps * crop->top) /
-			vr_ps + (crop->left * ps) / vr_ps +
-			((crop->width / vr_ps) - 1) * ps;
-		break;
+		vout->ps = ps;
+
+		*cropped_offset = (line_length * ps) *
+			crop->top + crop->left * ps;
 	}
+
 	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, "%s Offset:%x\n",
-			__func__, *cropped_offset);
+			__func__, vout->cropped_offset);
+
 	return 0;
 }
 
@@ -664,7 +363,7 @@ static int video_mode_to_dss_mode(struct omap_vout_device *vout)
 /*
  * Setup the overlay
  */
-int omapvid_setup_overlay(struct omap_vout_device *vout,
+static int omapvid_setup_overlay(struct omap_vout_device *vout,
 		struct omap_overlay *ovl, int posx, int posy, int outw,
 		int outh, u32 addr)
 {
@@ -687,7 +386,7 @@ int omapvid_setup_overlay(struct omap_vout_device *vout,
 	/* Setup the input plane parameters according to
 	 * rotation value selected.
 	 */
-	if (rotate_90_or_270(vout)) {
+	if (is_rotation_90_or_270(vout)) {
 		cropheight = vout->crop.width;
 		cropwidth = vout->crop.height;
 		pixheight = vout->pix.width;
@@ -711,7 +410,7 @@ int omapvid_setup_overlay(struct omap_vout_device *vout,
 	info.out_width = outw;
 	info.out_height = outh;
 	info.global_alpha = vout->win.global_alpha;
-	if (!rotation_enabled(vout)) {
+	if (!is_rotation_enabled(vout)) {
 		info.rotation = 0;
 		info.rotation_type = OMAP_DSS_ROT_DMA;
 		info.screen_width = pixwidth;
@@ -744,7 +443,7 @@ setup_ovl_err:
 /*
  * Initialize the overlay structure
  */
-int omapvid_init(struct omap_vout_device *vout, u32 addr)
+static int omapvid_init(struct omap_vout_device *vout, u32 addr)
 {
 	int ret = 0, i;
 	struct v4l2_window *win;
@@ -809,7 +508,7 @@ omapvid_init_err:
 /*
  * Apply the changes set the go bit of DSS
  */
-int omapvid_apply_changes(struct omap_vout_device *vout)
+static int omapvid_apply_changes(struct omap_vout_device *vout)
 {
 	int i;
 	struct omap_overlay *ovl;
@@ -825,7 +524,7 @@ int omapvid_apply_changes(struct omap_vout_device *vout)
 	return 0;
 }
 
-void omap_vout_isr(void *arg, unsigned int irqstatus)
+static void omap_vout_isr(void *arg, unsigned int irqstatus)
 {
 	int ret;
 	u32 addr, fid;
@@ -848,10 +547,20 @@ void omap_vout_isr(void *arg, unsigned int irqstatus)
 
 	spin_lock(&vout->vbq_lock);
 	do_gettimeofday(&timevalue);
-	if (cur_display->type == OMAP_DISPLAY_TYPE_DPI) {
-		if (!(irqstatus & DISPC_IRQ_VSYNC))
-			goto vout_isr_err;
 
+	if (cur_display->type != OMAP_DISPLAY_TYPE_VENC) {
+		switch (cur_display->type) {
+		case OMAP_DISPLAY_TYPE_DPI:
+			if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2)))
+				goto vout_isr_err;
+			break;
+		case OMAP_DISPLAY_TYPE_HDMI:
+			if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN))
+				goto vout_isr_err;
+			break;
+		default:
+			goto vout_isr_err;
+		}
 		if (!vout->first_int && (vout->cur_frm != vout->next_frm)) {
 			vout->cur_frm->ts = timevalue;
 			vout->cur_frm->state = VIDEOBUF_DONE;
@@ -875,7 +584,7 @@ void omap_vout_isr(void *arg, unsigned int irqstatus)
 		ret = omapvid_init(vout, addr);
 		if (ret)
 			printk(KERN_ERR VOUT_NAME
-					"failed to set overlay info\n");
+				"failed to set overlay info\n");
 		/* Enable the pipeline and set the Go bit */
 		ret = omapvid_apply_changes(vout);
 		if (ret)
@@ -954,6 +663,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	int startindex = 0, i, j;
 	u32 phy_addr = 0, virt_addr = 0;
 	struct omap_vout_device *vout = q->priv_data;
+	struct omapvideo_info *ovid = &vout->vid_info;
 
 	if (!vout)
 		return -EINVAL;
@@ -966,13 +676,10 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 	if (V4L2_MEMORY_MMAP == vout->memory && *count < startindex)
 		*count = startindex;
 
-	if ((rotation_enabled(vout)) && *count > VRFB_NUM_BUFS)
-		*count = VRFB_NUM_BUFS;
-
-	/* If rotation is enabled, allocate memory for VRFB space also */
-	if (rotation_enabled(vout))
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
 		if (omap_vout_vrfb_buffer_setup(vout, count, startindex))
 			return -ENOMEM;
+	}
 
 	if (V4L2_MEMORY_MMAP != vout->memory)
 		return 0;
@@ -996,8 +703,11 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 		virt_addr = omap_vout_alloc_buffer(vout->buffer_size,
 				&phy_addr);
 		if (!virt_addr) {
-			if (!rotation_enabled(vout))
+			if (ovid->rotation_type == VOUT_ROT_NONE) {
 				break;
+			} else {
+				if (!is_rotation_enabled(vout))
+					break;
 			/* Free the VRFB buffers if no space for V4L2 buffers */
 			for (j = i; j < *count; j++) {
 				omap_vout_free_buffer(
@@ -1005,6 +715,7 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 						vout->smsshado_size);
 				vout->smsshado_virt_addr[j] = 0;
 				vout->smsshado_phy_addr[j] = 0;
+				}
 			}
 		}
 		vout->buf_virt_addr[i] = virt_addr;
@@ -1017,9 +728,9 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count,
 
 /*
  * Free the V4L2 buffers additionally allocated than default
- * number of buffers and free all the VRFB buffers
+ * number of buffers
  */
-static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
+static void omap_vout_free_extra_buffers(struct omap_vout_device *vout)
 {
 	int num_buffers = 0, i;
 
@@ -1034,20 +745,6 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
 		vout->buf_virt_addr[i] = 0;
 		vout->buf_phy_addr[i] = 0;
 	}
-	/* Free the VRFB buffers only if they are allocated
-	 * during reqbufs.  Don't free if init time allocated
-	 */
-	if (!vout->vrfb_static_allocation) {
-		for (i = 0; i < VRFB_NUM_BUFS; i++) {
-			if (vout->smsshado_virt_addr[i]) {
-				omap_vout_free_buffer(
-						vout->smsshado_virt_addr[i],
-						vout->smsshado_size);
-				vout->smsshado_virt_addr[i] = 0;
-				vout->smsshado_phy_addr[i] = 0;
-			}
-		}
-	}
 	vout->buffer_allocated = num_buffers;
 }
 
@@ -1059,16 +756,11 @@ static void omap_vout_free_allbuffers(struct omap_vout_device *vout)
  * buffer into VRFB memory space before giving it to the DSS.
  */
 static int omap_vout_buffer_prepare(struct videobuf_queue *q,
-			    struct videobuf_buffer *vb,
-			    enum v4l2_field field)
+			struct videobuf_buffer *vb,
+			enum v4l2_field field)
 {
-	dma_addr_t dmabuf;
-	struct vid_vrfb_dma *tx;
-	enum dss_rotation rotation;
 	struct omap_vout_device *vout = q->priv_data;
-	u32 dest_frame_index = 0, src_element_index = 0;
-	u32 dest_element_index = 0, src_frame_index = 0;
-	u32 elem_count = 0, frame_count = 0, pixsize = 2;
+	struct omapvideo_info *ovid = &vout->vid_info;
 
 	if (VIDEOBUF_NEEDS_INIT == vb->state) {
 		vb->width = vout->pix.width;
@@ -1087,66 +779,24 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 		vout->queued_buf_addr[vb->i] = (u8 *)
 			omap_vout_uservirt_to_phys(vb->baddr);
 	} else {
-		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
-	}
+		u32 addr, dma_addr;
+		unsigned long size;
 
-	if (!rotation_enabled(vout))
-		return 0;
+		addr = (unsigned long) vout->buf_virt_addr[vb->i];
+		size = (unsigned long) vb->size;
 
-	dmabuf = vout->buf_phy_addr[vb->i];
-	/* If rotation is enabled, copy input buffer into VRFB
-	 * memory space using DMA. We are copying input buffer
-	 * into VRFB memory space of desired angle and DSS will
-	 * read image VRFB memory for 0 degree angle
-	 */
-	pixsize = vout->bpp * vout->vrfb_bpp;
-	/*
-	 * DMA transfer in double index mode
-	 */
+		dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr,
+				size, DMA_TO_DEVICE);
+		if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr))
+			v4l2_err(&vout->vid_dev->v4l2_dev, "dma_map_single failed\n");
 
-	/* Frame index */
-	dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
-			(vout->pix.width * vout->bpp)) + 1;
-
-	/* Source and destination parameters */
-	src_element_index = 0;
-	src_frame_index = 0;
-	dest_element_index = 1;
-	/* Number of elements per frame */
-	elem_count = vout->pix.width * vout->bpp;
-	frame_count = vout->pix.height;
-	tx = &vout->vrfb_dma_tx;
-	tx->tx_status = 0;
-	omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
-			(elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
-			tx->dev_id, 0x0);
-	/* src_port required only for OMAP1 */
-	omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
-			dmabuf, src_element_index, src_frame_index);
-	/*set dma source burst mode for VRFB */
-	omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
-	rotation = calc_rotation(vout);
-
-	/* dest_port required only for OMAP1 */
-	omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
-			vout->vrfb_context[vb->i].paddr[0], dest_element_index,
-			dest_frame_index);
-	/*set dma dest burst mode for VRFB */
-	omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
-	omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
-
-	omap_start_dma(tx->dma_ch);
-	interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
-
-	if (tx->tx_status == 0) {
-		omap_stop_dma(tx->dma_ch);
-		return -EINVAL;
+		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
 	}
-	/* Store buffers physical address into an array. Addresses
-	 * from this array will be used to configure DSS */
-	vout->queued_buf_addr[vb->i] = (u8 *)
-		vout->vrfb_context[vb->i].paddr[rotation];
-	return 0;
+
+	if (ovid->rotation_type == VOUT_ROT_VRFB)
+		return omap_vout_prepare_vrfb(vout, vb);
+	else
+		return 0;
 }
 
 /*
@@ -1298,7 +948,15 @@ static int omap_vout_release(struct file *file)
 				"Unable to apply changes\n");
 
 	/* Free all buffers */
-	omap_vout_free_allbuffers(vout);
+	omap_vout_free_extra_buffers(vout);
+
+	/* Free the VRFB buffers only if they are allocated
+	 * during reqbufs.  Don't free if init time allocated
+	 */
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		if (!vout->vrfb_static_allocation)
+			omap_vout_free_vrfb_buffers(vout);
+	}
 	videobuf_mmap_free(q);
 
 	/* Even if apply changes fails we should continue
@@ -1307,7 +965,7 @@ static int omap_vout_release(struct file *file)
 		u32 mask = 0;
 
 		mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN |
-			DISPC_IRQ_EVSYNC_ODD;
+			DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_VSYNC2;
 		omap_dispc_unregister_isr(omap_vout_isr, vout, mask);
 		vout->streaming = 0;
 
@@ -1383,10 +1041,7 @@ static int vidioc_enum_fmt_vid_out(struct file *file, void *fh,
 			struct v4l2_fmtdesc *fmt)
 {
 	int index = fmt->index;
-	enum v4l2_buf_type type = fmt->type;
 
-	fmt->index = index;
-	fmt->type = type;
 	if (index >= NUM_OUTPUT_FORMATS)
 		return -EINVAL;
 
@@ -1457,7 +1112,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
 
 	/* We dont support RGB24-packed mode if vrfb rotation
 	 * is enabled*/
-	if ((rotation_enabled(vout)) &&
+	if ((is_rotation_enabled(vout)) &&
 			f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 		ret = -EINVAL;
 		goto s_fmt_vid_out_exit;
@@ -1465,7 +1120,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh,
 
 	/* get the framebuffer parameters */
 
-	if (rotate_90_or_270(vout)) {
+	if (is_rotation_90_or_270(vout)) {
 		vout->fbuf.fmt.height = timing->x_res;
 		vout->fbuf.fmt.width = timing->y_res;
 	} else {
@@ -1555,10 +1210,7 @@ static int vidioc_enum_fmt_vid_overlay(struct file *file, void *fh,
 			struct v4l2_fmtdesc *fmt)
 {
 	int index = fmt->index;
-	enum v4l2_buf_type type = fmt->type;
 
-	fmt->index = index;
-	fmt->type = type;
 	if (index >= NUM_OUTPUT_FORMATS)
 		return -EINVAL;
 
@@ -1645,7 +1297,7 @@ static int vidioc_s_crop(struct file *file, void *fh, struct v4l2_crop *crop)
 	/* get the display device attached to the overlay */
 	timing = &ovl->manager->device->panel.timings;
 
-	if (rotate_90_or_270(vout)) {
+	if (is_rotation_90_or_270(vout)) {
 		vout->fbuf.fmt.height = timing->x_res;
 		vout->fbuf.fmt.width = timing->y_res;
 	} else {
@@ -1725,9 +1377,17 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
 	switch (a->id) {
 	case V4L2_CID_ROTATE:
 	{
+		struct omapvideo_info *ovid;
 		int rotation = a->value;
 
+		ovid = &vout->vid_info;
+
 		mutex_lock(&vout->lock);
+		if (rotation && ovid->rotation_type == VOUT_ROT_NONE) {
+			mutex_unlock(&vout->lock);
+			ret = -ERANGE;
+			break;
+		}
 
 		if (rotation && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 			mutex_unlock(&vout->lock);
@@ -1783,6 +1443,11 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *a)
 		ovl = ovid->overlays[0];
 
 		mutex_lock(&vout->lock);
+		if (mirror && ovid->rotation_type == VOUT_ROT_NONE) {
+			mutex_unlock(&vout->lock);
+			ret = -ERANGE;
+			break;
+		}
 
 		if (mirror  && vout->pix.pixelformat == V4L2_PIX_FMT_RGB24) {
 			mutex_unlock(&vout->lock);
@@ -1893,7 +1558,7 @@ static int vidioc_qbuf(struct file *file, void *fh,
 		}
 	}
 
-	if ((rotation_enabled(vout)) &&
+	if ((is_rotation_enabled(vout)) &&
 			vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED) {
 		v4l2_warn(&vout->vid_dev->v4l2_dev,
 				"DMA Channel not allocated for Rotation\n");
@@ -1908,15 +1573,28 @@ static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 	struct omap_vout_device *vout = fh;
 	struct videobuf_queue *q = &vout->vbq;
 
+	int ret;
+	u32 addr;
+	unsigned long size;
+	struct videobuf_buffer *vb;
+
+	vb = q->bufs[b->index];
+
 	if (!vout->streaming)
 		return -EINVAL;
 
 	if (file->f_flags & O_NONBLOCK)
 		/* Call videobuf_dqbuf for non blocking mode */
-		return videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
+		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 1);
 	else
 		/* Call videobuf_dqbuf for  blocking mode */
-		return videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+		ret = videobuf_dqbuf(q, (struct v4l2_buffer *)b, 0);
+
+	addr = (unsigned long) vout->buf_phy_addr[vb->i];
+	size = (unsigned long) vb->size;
+	dma_unmap_single(vout->vid_dev->v4l2_dev.dev,  addr,
+				size, DMA_TO_DEVICE);
+	return ret;
 }
 
 static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
@@ -1965,7 +1643,8 @@ static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
 	addr = (unsigned long) vout->queued_buf_addr[vout->cur_frm->i]
 		+ vout->cropped_offset;
 
-	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD;
+	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD
+		| DISPC_IRQ_VSYNC2;
 
 	omap_dispc_register_isr(omap_vout_isr, vout, mask);
 
@@ -2015,7 +1694,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 		return -EINVAL;
 
 	vout->streaming = 0;
-	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD;
+	mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD
+		| DISPC_IRQ_VSYNC2;
 
 	omap_dispc_unregister_isr(omap_vout_isr, vout, mask);
 
@@ -2228,7 +1908,8 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
 	vout->mirror = 0;
 	vout->control[2].id = V4L2_CID_HFLIP;
 	vout->control[2].value = 0;
-	vout->vrfb_bpp = 2;
+	if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
+		vout->vrfb_bpp = 2;
 
 	control[1].id = V4L2_CID_BG_COLOR;
 	control[1].value = 0;
@@ -2260,17 +1941,15 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
 		int vid_num)
 {
 	u32 numbuffers;
-	int ret = 0, i, j;
-	int image_width, image_height;
-	struct video_device *vfd;
+	int ret = 0, i;
+	struct omapvideo_info *ovid;
 	struct omap_vout_device *vout;
-	int static_vrfb_allocation = 0, vrfb_num_bufs = VRFB_NUM_BUFS;
 	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
 	struct omap2video_device *vid_dev =
 		container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
 
 	vout = vid_dev->vouts[vid_num];
-	vfd = vout->vfd;
+	ovid = &vout->vid_info;
 
 	numbuffers = (vid_num == 0) ? video1_numbuffers : video2_numbuffers;
 	vout->buffer_size = (vid_num == 0) ? video1_bufsize : video2_bufsize;
@@ -2287,66 +1966,16 @@ static int __init omap_vout_setup_video_bufs(struct platform_device *pdev,
 		}
 	}
 
-	for (i = 0; i < VRFB_NUM_BUFS; i++) {
-		if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
-			dev_info(&pdev->dev, ": VRFB allocation failed\n");
-			for (j = 0; j < i; j++)
-				omap_vrfb_release_ctx(&vout->vrfb_context[j]);
-			ret = -ENOMEM;
-			goto free_buffers;
-		}
-	}
 	vout->cropped_offset = 0;
 
-	/* Calculate VRFB memory size */
-	/* allocate for worst case size */
-	image_width = VID_MAX_WIDTH / TILE_SIZE;
-	if (VID_MAX_WIDTH % TILE_SIZE)
-		image_width++;
-
-	image_width = image_width * TILE_SIZE;
-	image_height = VID_MAX_HEIGHT / TILE_SIZE;
-
-	if (VID_MAX_HEIGHT % TILE_SIZE)
-		image_height++;
-
-	image_height = image_height * TILE_SIZE;
-	vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2);
-
-	/*
-	 * Request and Initialize DMA, for DMA based VRFB transfer
-	 */
-	vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
-	vout->vrfb_dma_tx.dma_ch = -1;
-	vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
-	ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
-			omap_vout_vrfb_dma_tx_callback,
-			(void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
-	if (ret < 0) {
-		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
-		dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
-				" video%d\n", vfd->minor);
-	}
-	init_waitqueue_head(&vout->vrfb_dma_tx.wait);
-
-	/* Allocate VRFB buffers if selected through bootargs */
-	static_vrfb_allocation = (vid_num == 0) ?
-		vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
-
-	/* statically allocated the VRFB buffer is done through
-	   commands line aruments */
-	if (static_vrfb_allocation) {
-		if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) {
-			ret =  -ENOMEM;
-			goto release_vrfb_ctx;
-		}
-		vout->vrfb_static_allocation = 1;
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		int static_vrfb_allocation = (vid_num == 0) ?
+			vid1_static_vrfb_alloc : vid2_static_vrfb_alloc;
+		ret = omap_vout_setup_vrfb_bufs(pdev, vid_num,
+				static_vrfb_allocation);
 	}
-	return 0;
 
-release_vrfb_ctx:
-	for (j = 0; j < VRFB_NUM_BUFS; j++)
-		omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+	return ret;
 
 free_buffers:
 	for (i = 0; i < numbuffers; i++) {
@@ -2389,6 +2018,10 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 		vout->vid_info.num_overlays = 1;
 		vout->vid_info.id = k + 1;
 
+		/* Set VRFB as rotation_type for omap2 and omap3 */
+		if (cpu_is_omap24xx() || cpu_is_omap34xx())
+			vout->vid_info.rotation_type = VOUT_ROT_VRFB;
+
 		/* Setup the default configuration for the video devices
 		 */
 		if (omap_vout_setup_video_data(vout) != 0) {
@@ -2422,7 +2055,8 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 			goto success;
 
 error2:
-		omap_vout_release_vrfb(vout);
+		if (vout->vid_info.rotation_type == VOUT_ROT_VRFB)
+			omap_vout_release_vrfb(vout);
 		omap_vout_free_buffers(vout);
 error1:
 		video_device_release(vfd);
@@ -2443,11 +2077,13 @@ success:
 static void omap_vout_cleanup_device(struct omap_vout_device *vout)
 {
 	struct video_device *vfd;
+	struct omapvideo_info *ovid;
 
 	if (!vout)
 		return;
 
 	vfd = vout->vfd;
+	ovid = &vout->vid_info;
 	if (vfd) {
 		if (!video_is_registered(vfd)) {
 			/*
@@ -2463,14 +2099,15 @@ static void omap_vout_cleanup_device(struct omap_vout_device *vout)
 			video_unregister_device(vfd);
 		}
 	}
-
-	omap_vout_release_vrfb(vout);
+	if (ovid->rotation_type == VOUT_ROT_VRFB) {
+		omap_vout_release_vrfb(vout);
+		/* Free the VRFB buffer if allocated
+		 * init time
+		 */
+		if (vout->vrfb_static_allocation)
+			omap_vout_free_vrfb_buffers(vout);
+	}
 	omap_vout_free_buffers(vout);
-	/* Free the VRFB buffer if allocated
-	 * init time
-	 */
-	if (vout->vrfb_static_allocation)
-		omap_vout_free_vrfb_buffers(vout);
 
 	kfree(vout);
 }
diff --git a/drivers/media/video/omap/omap_vout_vrfb.c b/drivers/media/video/omap/omap_vout_vrfb.c
new file mode 100644
index 00000000000..ebebcac4922
--- /dev/null
+++ b/drivers/media/video/omap/omap_vout_vrfb.c
@@ -0,0 +1,390 @@
+/*
+ * omap_vout_vrfb.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+
+#include <media/videobuf-dma-contig.h>
+#include <media/v4l2-device.h>
+
+#include <plat/dma.h>
+#include <plat/vrfb.h>
+
+#include "omap_voutdef.h"
+#include "omap_voutlib.h"
+
+/*
+ * Function for allocating video buffers
+ */
+static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout,
+		unsigned int *count, int startindex)
+{
+	int i, j;
+
+	for (i = 0; i < *count; i++) {
+		if (!vout->smsshado_virt_addr[i]) {
+			vout->smsshado_virt_addr[i] =
+				omap_vout_alloc_buffer(vout->smsshado_size,
+						&vout->smsshado_phy_addr[i]);
+		}
+		if (!vout->smsshado_virt_addr[i] && startindex != -1) {
+			if (V4L2_MEMORY_MMAP == vout->memory && i >= startindex)
+				break;
+		}
+		if (!vout->smsshado_virt_addr[i]) {
+			for (j = 0; j < i; j++) {
+				omap_vout_free_buffer(
+						vout->smsshado_virt_addr[j],
+						vout->smsshado_size);
+				vout->smsshado_virt_addr[j] = 0;
+				vout->smsshado_phy_addr[j] = 0;
+			}
+			*count = 0;
+			return -ENOMEM;
+		}
+		memset((void *) vout->smsshado_virt_addr[i], 0,
+				vout->smsshado_size);
+	}
+	return 0;
+}
+
+/*
+ * Wakes up the application once the DMA transfer to VRFB space is completed.
+ */
+static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data)
+{
+	struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data;
+
+	t->tx_status = 1;
+	wake_up_interruptible(&t->wait);
+}
+
+/*
+ * Free VRFB buffers
+ */
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout)
+{
+	int j;
+
+	for (j = 0; j < VRFB_NUM_BUFS; j++) {
+		omap_vout_free_buffer(vout->smsshado_virt_addr[j],
+				vout->smsshado_size);
+		vout->smsshado_virt_addr[j] = 0;
+		vout->smsshado_phy_addr[j] = 0;
+	}
+}
+
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+			u32 static_vrfb_allocation)
+{
+	int ret = 0, i, j;
+	struct omap_vout_device *vout;
+	struct video_device *vfd;
+	int image_width, image_height;
+	int vrfb_num_bufs = VRFB_NUM_BUFS;
+	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
+	struct omap2video_device *vid_dev =
+		container_of(v4l2_dev, struct omap2video_device, v4l2_dev);
+
+	vout = vid_dev->vouts[vid_num];
+	vfd = vout->vfd;
+
+	for (i = 0; i < VRFB_NUM_BUFS; i++) {
+		if (omap_vrfb_request_ctx(&vout->vrfb_context[i])) {
+			dev_info(&pdev->dev, ": VRFB allocation failed\n");
+			for (j = 0; j < i; j++)
+				omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+			ret = -ENOMEM;
+			goto free_buffers;
+		}
+	}
+
+	/* Calculate VRFB memory size */
+	/* allocate for worst case size */
+	image_width = VID_MAX_WIDTH / TILE_SIZE;
+	if (VID_MAX_WIDTH % TILE_SIZE)
+		image_width++;
+
+	image_width = image_width * TILE_SIZE;
+	image_height = VID_MAX_HEIGHT / TILE_SIZE;
+
+	if (VID_MAX_HEIGHT % TILE_SIZE)
+		image_height++;
+
+	image_height = image_height * TILE_SIZE;
+	vout->smsshado_size = PAGE_ALIGN(image_width * image_height * 2 * 2);
+
+	/*
+	 * Request and Initialize DMA, for DMA based VRFB transfer
+	 */
+	vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE;
+	vout->vrfb_dma_tx.dma_ch = -1;
+	vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED;
+	ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX",
+			omap_vout_vrfb_dma_tx_callback,
+			(void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
+	if (ret < 0) {
+		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+		dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
+				" video%d\n", vfd->minor);
+	}
+	init_waitqueue_head(&vout->vrfb_dma_tx.wait);
+
+	/* statically allocated the VRFB buffer is done through
+	   commands line aruments */
+	if (static_vrfb_allocation) {
+		if (omap_vout_allocate_vrfb_buffers(vout, &vrfb_num_bufs, -1)) {
+			ret =  -ENOMEM;
+			goto release_vrfb_ctx;
+		}
+		vout->vrfb_static_allocation = 1;
+	}
+	return 0;
+
+release_vrfb_ctx:
+	for (j = 0; j < VRFB_NUM_BUFS; j++)
+		omap_vrfb_release_ctx(&vout->vrfb_context[j]);
+free_buffers:
+	omap_vout_free_buffers(vout);
+
+	return ret;
+}
+
+/*
+ * Release the VRFB context once the module exits
+ */
+void omap_vout_release_vrfb(struct omap_vout_device *vout)
+{
+	int i;
+
+	for (i = 0; i < VRFB_NUM_BUFS; i++)
+		omap_vrfb_release_ctx(&vout->vrfb_context[i]);
+
+	if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) {
+		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
+		omap_free_dma(vout->vrfb_dma_tx.dma_ch);
+	}
+}
+
+/*
+ * Allocate the buffers for the VRFB space.  Data is copied from V4L2
+ * buffers to the VRFB buffers using the DMA engine.
+ */
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+			  unsigned int *count, unsigned int startindex)
+{
+	int i;
+	bool yuv_mode;
+
+	if (!is_rotation_enabled(vout))
+		return 0;
+
+	/* If rotation is enabled, allocate memory for VRFB space also */
+	*count = *count > VRFB_NUM_BUFS ? VRFB_NUM_BUFS : *count;
+
+	/* Allocate the VRFB buffers only if the buffers are not
+	 * allocated during init time.
+	 */
+	if (!vout->vrfb_static_allocation)
+		if (omap_vout_allocate_vrfb_buffers(vout, count, startindex))
+			return -ENOMEM;
+
+	if (vout->dss_mode == OMAP_DSS_COLOR_YUV2 ||
+			vout->dss_mode == OMAP_DSS_COLOR_UYVY)
+		yuv_mode = true;
+	else
+		yuv_mode = false;
+
+	for (i = 0; i < *count; i++)
+		omap_vrfb_setup(&vout->vrfb_context[i],
+				vout->smsshado_phy_addr[i], vout->pix.width,
+				vout->pix.height, vout->bpp, yuv_mode);
+
+	return 0;
+}
+
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+				struct videobuf_buffer *vb)
+{
+	dma_addr_t dmabuf;
+	struct vid_vrfb_dma *tx;
+	enum dss_rotation rotation;
+	u32 dest_frame_index = 0, src_element_index = 0;
+	u32 dest_element_index = 0, src_frame_index = 0;
+	u32 elem_count = 0, frame_count = 0, pixsize = 2;
+
+	if (!is_rotation_enabled(vout))
+		return 0;
+
+	dmabuf = vout->buf_phy_addr[vb->i];
+	/* If rotation is enabled, copy input buffer into VRFB
+	 * memory space using DMA. We are copying input buffer
+	 * into VRFB memory space of desired angle and DSS will
+	 * read image VRFB memory for 0 degree angle
+	 */
+	pixsize = vout->bpp * vout->vrfb_bpp;
+	/*
+	 * DMA transfer in double index mode
+	 */
+
+	/* Frame index */
+	dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) -
+			(vout->pix.width * vout->bpp)) + 1;
+
+	/* Source and destination parameters */
+	src_element_index = 0;
+	src_frame_index = 0;
+	dest_element_index = 1;
+	/* Number of elements per frame */
+	elem_count = vout->pix.width * vout->bpp;
+	frame_count = vout->pix.height;
+	tx = &vout->vrfb_dma_tx;
+	tx->tx_status = 0;
+	omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+			(elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT,
+			tx->dev_id, 0x0);
+	/* src_port required only for OMAP1 */
+	omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+			dmabuf, src_element_index, src_frame_index);
+	/*set dma source burst mode for VRFB */
+	omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
+	rotation = calc_rotation(vout);
+
+	/* dest_port required only for OMAP1 */
+	omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX,
+			vout->vrfb_context[vb->i].paddr[0], dest_element_index,
+			dest_frame_index);
+	/*set dma dest burst mode for VRFB */
+	omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16);
+	omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0);
+
+	omap_start_dma(tx->dma_ch);
+	interruptible_sleep_on_timeout(&tx->wait, VRFB_TX_TIMEOUT);
+
+	if (tx->tx_status == 0) {
+		omap_stop_dma(tx->dma_ch);
+		return -EINVAL;
+	}
+	/* Store buffers physical address into an array. Addresses
+	 * from this array will be used to configure DSS */
+	vout->queued_buf_addr[vb->i] = (u8 *)
+		vout->vrfb_context[vb->i].paddr[rotation];
+	return 0;
+}
+
+/*
+ * Calculate the buffer offsets from which the streaming should
+ * start. This offset calculation is mainly required because of
+ * the VRFB 32 pixels alignment with rotation.
+ */
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout)
+{
+	enum dss_rotation rotation;
+	bool mirroring = vout->mirror;
+	struct v4l2_rect *crop = &vout->crop;
+	struct v4l2_pix_format *pix = &vout->pix;
+	int *cropped_offset = &vout->cropped_offset;
+	int vr_ps = 1, ps = 2, temp_ps = 2;
+	int offset = 0, ctop = 0, cleft = 0, line_length = 0;
+
+	rotation = calc_rotation(vout);
+
+	if (V4L2_PIX_FMT_YUYV == pix->pixelformat ||
+			V4L2_PIX_FMT_UYVY == pix->pixelformat) {
+		if (is_rotation_enabled(vout)) {
+			/*
+			 * ps    - Actual pixel size for YUYV/UYVY for
+			 *         VRFB/Mirroring is 4 bytes
+			 * vr_ps - Virtually pixel size for YUYV/UYVY is
+			 *         2 bytes
+			 */
+			ps = 4;
+			vr_ps = 2;
+		} else {
+			ps = 2;	/* otherwise the pixel size is 2 byte */
+		}
+	} else if (V4L2_PIX_FMT_RGB32 == pix->pixelformat) {
+		ps = 4;
+	} else if (V4L2_PIX_FMT_RGB24 == pix->pixelformat) {
+		ps = 3;
+	}
+	vout->ps = ps;
+	vout->vr_ps = vr_ps;
+
+	if (is_rotation_enabled(vout)) {
+		line_length = MAX_PIXELS_PER_LINE;
+		ctop = (pix->height - crop->height) - crop->top;
+		cleft = (pix->width - crop->width) - crop->left;
+	} else {
+		line_length = pix->width;
+	}
+	vout->line_length = line_length;
+	switch (rotation) {
+	case dss_rotation_90_degree:
+		offset = vout->vrfb_context[0].yoffset *
+			vout->vrfb_context[0].bytespp;
+		temp_ps = ps / vr_ps;
+		if (mirroring == 0) {
+			*cropped_offset = offset + line_length *
+				temp_ps * cleft + crop->top * temp_ps;
+		} else {
+			*cropped_offset = offset + line_length * temp_ps *
+				cleft + crop->top * temp_ps + (line_length *
+				((crop->width / (vr_ps)) - 1) * ps);
+		}
+		break;
+	case dss_rotation_180_degree:
+		offset = ((MAX_PIXELS_PER_LINE * vout->vrfb_context[0].yoffset *
+			vout->vrfb_context[0].bytespp) +
+			(vout->vrfb_context[0].xoffset *
+			vout->vrfb_context[0].bytespp));
+		if (mirroring == 0) {
+			*cropped_offset = offset + (line_length * ps * ctop) +
+				(cleft / vr_ps) * ps;
+
+		} else {
+			*cropped_offset = offset + (line_length * ps * ctop) +
+				(cleft / vr_ps) * ps + (line_length *
+				(crop->height - 1) * ps);
+		}
+		break;
+	case dss_rotation_270_degree:
+		offset = MAX_PIXELS_PER_LINE * vout->vrfb_context[0].xoffset *
+			vout->vrfb_context[0].bytespp;
+		temp_ps = ps / vr_ps;
+		if (mirroring == 0) {
+			*cropped_offset = offset + line_length *
+			    temp_ps * crop->left + ctop * ps;
+		} else {
+			*cropped_offset = offset + line_length *
+				temp_ps * crop->left + ctop * ps +
+				(line_length * ((crop->width / vr_ps) - 1) *
+				 ps);
+		}
+		break;
+	case dss_rotation_0_degree:
+		if (mirroring == 0) {
+			*cropped_offset = (line_length * ps) *
+				crop->top + (crop->left / vr_ps) * ps;
+		} else {
+			*cropped_offset = (line_length * ps) *
+				crop->top + (crop->left / vr_ps) * ps +
+				(line_length * (crop->height - 1) * ps);
+		}
+		break;
+	default:
+		*cropped_offset = (line_length * ps * crop->top) /
+			vr_ps + (crop->left * ps) / vr_ps +
+			((crop->width / vr_ps) - 1) * ps;
+		break;
+	}
+}
diff --git a/drivers/media/video/omap/omap_vout_vrfb.h b/drivers/media/video/omap/omap_vout_vrfb.h
new file mode 100644
index 00000000000..ffde741e059
--- /dev/null
+++ b/drivers/media/video/omap/omap_vout_vrfb.h
@@ -0,0 +1,40 @@
+/*
+ * omap_vout_vrfb.h
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef OMAP_VOUT_VRFB_H
+#define OMAP_VOUT_VRFB_H
+
+#ifdef CONFIG_VIDEO_OMAP2_VOUT_VRFB
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout);
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+			u32 static_vrfb_allocation);
+void omap_vout_release_vrfb(struct omap_vout_device *vout);
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+			unsigned int *count, unsigned int startindex);
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+			struct videobuf_buffer *vb);
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout);
+#else
+void omap_vout_free_vrfb_buffers(struct omap_vout_device *vout) { }
+int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
+			u32 static_vrfb_allocation)
+		{ return 0; }
+void omap_vout_release_vrfb(struct omap_vout_device *vout) { }
+int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
+			unsigned int *count, unsigned int startindex)
+		{ return 0; }
+int omap_vout_prepare_vrfb(struct omap_vout_device *vout,
+			struct videobuf_buffer *vb)
+		{ return 0; }
+void omap_vout_calculate_vrfb_offset(struct omap_vout_device *vout) { }
+#endif
+
+#endif
diff --git a/drivers/media/video/omap/omap_voutdef.h b/drivers/media/video/omap/omap_voutdef.h
index 659497b8499..d793501cafc 100644
--- a/drivers/media/video/omap/omap_voutdef.h
+++ b/drivers/media/video/omap/omap_voutdef.h
@@ -12,6 +12,7 @@
 #define OMAP_VOUTDEF_H
 
 #include <video/omapdss.h>
+#include <plat/vrfb.h>
 
 #define YUYV_BPP        2
 #define RGB565_BPP      2
@@ -27,6 +28,31 @@
 #define MAX_DISPLAYS	3
 #define MAX_MANAGERS	3
 
+#define QQVGA_WIDTH		160
+#define QQVGA_HEIGHT		120
+
+/* Max Resolution supported by the driver */
+#define VID_MAX_WIDTH		1280	/* Largest width */
+#define VID_MAX_HEIGHT		720	/* Largest height */
+
+/* Mimimum requirement is 2x2 for DSS */
+#define VID_MIN_WIDTH		2
+#define VID_MIN_HEIGHT		2
+
+/* 2048 x 2048 is max res supported by OMAP display controller */
+#define MAX_PIXELS_PER_LINE     2048
+
+#define VRFB_TX_TIMEOUT         1000
+#define VRFB_NUM_BUFS		4
+
+/* Max buffer size tobe allocated during init */
+#define OMAP_VOUT_MAX_BUF_SIZE (VID_MAX_WIDTH*VID_MAX_HEIGHT*4)
+
+enum dma_channel_state {
+	DMA_CHAN_NOT_ALLOTED,
+	DMA_CHAN_ALLOTED,
+};
+
 /* Enum for Rotation
  * DSS understands rotation in 0, 1, 2, 3 context
  * while V4L2 driver understands it as 0, 90, 180, 270
@@ -37,6 +63,18 @@ enum dss_rotation {
 	dss_rotation_180_degree	= 2,
 	dss_rotation_270_degree = 3,
 };
+
+/* Enum for choosing rotation type for vout
+ * DSS2 doesn't understand no rotation as an
+ * option while V4L2 driver doesn't support
+ * rotation in the case where VRFB is not built in
+ * the kernel
+ */
+enum vout_rotaion_type {
+	VOUT_ROT_NONE	= 0,
+	VOUT_ROT_VRFB	= 1,
+};
+
 /*
  * This structure is used to store the DMA transfer parameters
  * for VRFB hidden buffer
@@ -53,6 +91,7 @@ struct omapvideo_info {
 	int id;
 	int num_overlays;
 	struct omap_overlay *overlays[MAX_OVLS];
+	enum vout_rotaion_type rotation_type;
 };
 
 struct omap2video_device {
@@ -144,4 +183,43 @@ struct omap_vout_device {
 	int io_allowed;
 
 };
+
+/*
+ * Return true if rotation is 90 or 270
+ */
+static inline int is_rotation_90_or_270(const struct omap_vout_device *vout)
+{
+	return (vout->rotation == dss_rotation_90_degree ||
+			vout->rotation == dss_rotation_270_degree);
+}
+
+/*
+ * Return true if rotation is enabled
+ */
+static inline int is_rotation_enabled(const struct omap_vout_device *vout)
+{
+	return vout->rotation || vout->mirror;
+}
+
+/*
+ * Reverse the rotation degree if mirroring is enabled
+ */
+static inline int calc_rotation(const struct omap_vout_device *vout)
+{
+	if (!vout->mirror)
+		return vout->rotation;
+
+	switch (vout->rotation) {
+	case dss_rotation_90_degree:
+		return dss_rotation_270_degree;
+	case dss_rotation_270_degree:
+		return dss_rotation_90_degree;
+	case dss_rotation_180_degree:
+		return dss_rotation_0_degree;
+	default:
+		return dss_rotation_180_degree;
+	}
+}
+
+void omap_vout_free_buffers(struct omap_vout_device *vout);
 #endif	/* ifndef OMAP_VOUTDEF_H */
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index 8ae74817a11..115408b9274 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -24,8 +24,12 @@
 #include <linux/types.h>
 #include <linux/videodev2.h>
 
+#include <linux/dma-mapping.h>
+
 #include <plat/cpu.h>
 
+#include "omap_voutlib.h"
+
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION("OMAP Video library");
 MODULE_LICENSE("GPL");
@@ -291,3 +295,45 @@ void omap_vout_new_format(struct v4l2_pix_format *pix,
 }
 EXPORT_SYMBOL_GPL(omap_vout_new_format);
 
+/*
+ * Allocate buffers
+ */
+unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr)
+{
+	u32 order, size;
+	unsigned long virt_addr, addr;
+
+	size = PAGE_ALIGN(buf_size);
+	order = get_order(size);
+	virt_addr = __get_free_pages(GFP_KERNEL, order);
+	addr = virt_addr;
+
+	if (virt_addr) {
+		while (size > 0) {
+			SetPageReserved(virt_to_page(addr));
+			addr += PAGE_SIZE;
+			size -= PAGE_SIZE;
+		}
+	}
+	*phys_addr = (u32) virt_to_phys((void *) virt_addr);
+	return virt_addr;
+}
+
+/*
+ * Free buffers
+ */
+void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size)
+{
+	u32 order, size;
+	unsigned long addr = virtaddr;
+
+	size = PAGE_ALIGN(buf_size);
+	order = get_order(size);
+
+	while (size > 0) {
+		ClearPageReserved(virt_to_page(addr));
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+	free_pages((unsigned long) virtaddr, order);
+}
diff --git a/drivers/media/video/omap/omap_voutlib.h b/drivers/media/video/omap/omap_voutlib.h
index a60b16e8bfc..e51750a597e 100644
--- a/drivers/media/video/omap/omap_voutlib.h
+++ b/drivers/media/video/omap/omap_voutlib.h
@@ -12,23 +12,25 @@
 #ifndef OMAP_VOUTLIB_H
 #define OMAP_VOUTLIB_H
 
-extern void omap_vout_default_crop(struct v4l2_pix_format *pix,
+void omap_vout_default_crop(struct v4l2_pix_format *pix,
 		struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop);
 
-extern int omap_vout_new_crop(struct v4l2_pix_format *pix,
+int omap_vout_new_crop(struct v4l2_pix_format *pix,
 		struct v4l2_rect *crop, struct v4l2_window *win,
 		struct v4l2_framebuffer *fbuf,
 		const struct v4l2_rect *new_crop);
 
-extern int omap_vout_try_window(struct v4l2_framebuffer *fbuf,
+int omap_vout_try_window(struct v4l2_framebuffer *fbuf,
 		struct v4l2_window *new_win);
 
-extern int omap_vout_new_window(struct v4l2_rect *crop,
+int omap_vout_new_window(struct v4l2_rect *crop,
 		struct v4l2_window *win, struct v4l2_framebuffer *fbuf,
 		struct v4l2_window *new_win);
 
-extern void omap_vout_new_format(struct v4l2_pix_format *pix,
+void omap_vout_new_format(struct v4l2_pix_format *pix,
 		struct v4l2_framebuffer *fbuf, struct v4l2_rect *crop,
 		struct v4l2_window *win);
+unsigned long omap_vout_alloc_buffer(u32 buf_size, u32 *phys_addr);
+void omap_vout_free_buffer(unsigned long virtaddr, u32 buf_size);
 #endif	/* #ifndef OMAP_VOUTLIB_H */
 
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index e7cfc85b0a1..8a947e603ac 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -26,7 +26,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 
 #include <media/omap1_camera.h>
 #include <media/soc_camera.h>
@@ -38,7 +37,7 @@
 
 
 #define DRIVER_NAME		"omap1-camera"
-#define VERSION_CODE		KERNEL_VERSION(0, 0, 1)
+#define DRIVER_VERSION		"0.0.2"
 
 
 /*
@@ -208,7 +207,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	struct soc_camera_device *icd = vq->priv_data;
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 			icd->current_fmt->host_fmt);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 
 	if (bytes_per_line < 0)
@@ -222,7 +221,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
 		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 			"%s: count=%d, size=%d\n", __func__, *count, *size);
 
 	return 0;
@@ -241,7 +240,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
 		videobuf_dma_contig_free(vq, vb);
 	} else {
 		struct soc_camera_device *icd = vq->priv_data;
-		struct device *dev = icd->dev.parent;
+		struct device *dev = icd->parent;
 		struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
 
 		videobuf_dma_unmap(dev, dma);
@@ -258,7 +257,7 @@ static int omap1_videobuf_prepare(struct videobuf_queue *vq,
 	struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb);
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 			icd->current_fmt->host_fmt);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	int ret;
 
@@ -490,7 +489,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
 						struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	struct omap1_cam_buf *buf;
 	u32 mode;
@@ -519,7 +518,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
 	pcdev->active = buf;
 	pcdev->ready = NULL;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 		"%s: capture not active, setup FIFO, start DMA\n", __func__);
 	mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK;
 	mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT;
@@ -543,8 +542,8 @@ static void omap1_videobuf_release(struct videobuf_queue *vq,
 	struct omap1_cam_buf *buf =
 			container_of(vb, struct omap1_cam_buf, vb);
 	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->dev.parent;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
 
 	switch (vb->state) {
@@ -573,7 +572,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
 {
 	struct omap1_cam_buf *buf = pcdev->active;
 	struct videobuf_buffer *vb;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 
 	if (WARN_ON(!buf)) {
 		suspend_capture(pcdev);
@@ -799,7 +798,7 @@ out:
 static irqreturn_t cam_isr(int irq, void *data)
 {
 	struct omap1_cam_dev *pcdev = data;
-	struct device *dev = pcdev->icd->dev.parent;
+	struct device *dev = pcdev->icd->parent;
 	struct omap1_cam_buf *buf = pcdev->active;
 	u32 it_status;
 	unsigned long flags;
@@ -909,7 +908,7 @@ static void sensor_reset(struct omap1_cam_dev *pcdev, bool reset)
  */
 static int omap1_cam_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	u32 ctrlclock;
 
@@ -952,14 +951,14 @@ static int omap1_cam_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_dbg(icd->dev.parent, "OMAP1 Camera driver attached to camera %d\n",
+	dev_dbg(icd->parent, "OMAP1 Camera driver attached to camera %d\n",
 			icd->devnum);
 	return 0;
 }
 
 static void omap1_cam_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	u32 ctrlclock;
 
@@ -985,7 +984,7 @@ static void omap1_cam_remove_device(struct soc_camera_device *icd)
 
 	pcdev->icd = NULL;
 
-	dev_dbg(icd->dev.parent,
+	dev_dbg(icd->parent,
 		"OMAP1 Camera driver detached from camera %d\n", icd->devnum);
 }
 
@@ -1070,7 +1069,7 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd,
 		unsigned int idx, struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	int formats = 0, ret;
 	enum v4l2_mbus_pixelcode code;
 	const struct soc_mbus_pixelfmt *fmt;
@@ -1222,9 +1221,9 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd,
 	struct v4l2_rect *rect = &crop->c;
 	const struct soc_camera_format_xlate *xlate = icd->current_fmt;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	struct v4l2_mbus_framefmt mf;
 	int ret;
 
@@ -1270,8 +1269,8 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd,
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
-	struct device *dev = icd->dev.parent;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_mbus_framefmt mf;
@@ -1326,7 +1325,7 @@ static int omap1_cam_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %#x not found\n",
+		dev_warn(icd->parent, "Format %#x not found\n",
 			 pix->pixelformat);
 		return -EINVAL;
 	}
@@ -1362,7 +1361,7 @@ static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
 				  struct vm_area_struct *vma)
 {
 	struct soc_camera_device *icd = q->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 	int ret;
 
@@ -1377,17 +1376,17 @@ static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
 static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 				     struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct omap1_cam_dev *pcdev = ici->priv;
 
 	if (!sg_mode)
 		videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
-				icd->dev.parent, &pcdev->lock,
+				icd->parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
 				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 	else
 		videobuf_queue_sg_init(q, &omap1_videobuf_ops,
-				icd->dev.parent, &pcdev->lock,
+				icd->parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
 				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 
@@ -1431,7 +1430,6 @@ static int omap1_cam_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the friendly caller:-> */
 	strlcpy(cap->card, "OMAP1 Camera", sizeof(cap->card));
-	cap->version = VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1440,9 +1438,9 @@ static int omap1_cam_querycap(struct soc_camera_host *ici,
 static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
 		__u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct omap1_cam_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	const struct soc_camera_format_xlate *xlate;
 	const struct soc_mbus_pixelfmt *fmt;
 	unsigned long camera_flags, common_flags;
@@ -1718,4 +1716,5 @@ MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg");
 MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
 MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
 MODULE_LICENSE("GPL v2");
+MODULE_LICENSE(DRIVER_VERSION);
 MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 69b60ba5dd7..eb97bff7116 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -31,7 +31,6 @@
 #include <linux/interrupt.h>
 #include <linux/videodev2.h>
 #include <linux/pci.h>		/* needed for videobufs */
-#include <linux/version.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -43,7 +42,7 @@
 
 #include "omap24xxcam.h"
 
-#define OMAP24XXCAM_VERSION KERNEL_VERSION(0, 0, 0)
+#define OMAP24XXCAM_VERSION "0.0.1"
 
 #define RESET_TIMEOUT_NS 10000
 
@@ -309,11 +308,11 @@ static int omap24xxcam_vbq_alloc_mmap_buffer(struct videobuf_buffer *vb)
 			order--;
 
 		/* try to allocate as many contiguous pages as possible */
-		page = alloc_pages(GFP_KERNEL | GFP_DMA, order);
+		page = alloc_pages(GFP_KERNEL, order);
 		/* if allocation fails, try to allocate smaller amount */
 		while (page == NULL) {
 			order--;
-			page = alloc_pages(GFP_KERNEL | GFP_DMA, order);
+			page = alloc_pages(GFP_KERNEL, order);
 			if (page == NULL && !order) {
 				err = -ENOMEM;
 				goto out;
@@ -993,7 +992,6 @@ static int vidioc_querycap(struct file *file, void *fh,
 
 	strlcpy(cap->driver, CAM_NAME, sizeof(cap->driver));
 	strlcpy(cap->card, cam->vfd->name, sizeof(cap->card));
-	cap->version = OMAP24XXCAM_VERSION;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
@@ -1888,6 +1886,7 @@ static void __exit omap24xxcam_cleanup(void)
 MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
 MODULE_DESCRIPTION("OMAP24xx Video for Linux camera driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(OMAP24XXCAM_VERSION);
 module_param(video_nr, int, 0);
 MODULE_PARM_DESC(video_nr,
 		 "Minor number for video device (-1 ==> auto assign)");
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 94b6ed89e19..5cea2bbd701 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -2234,3 +2234,4 @@ module_exit(isp_cleanup);
 MODULE_AUTHOR("Nokia Corporation");
 MODULE_DESCRIPTION("TI OMAP3 ISP driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(ISP_VIDEO_DRIVER_VERSION);
diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h
index 2620c405f5e..529e582ef94 100644
--- a/drivers/media/video/omap3isp/isp.h
+++ b/drivers/media/video/omap3isp/isp.h
@@ -139,6 +139,10 @@ struct isp_reg {
  *		3 - CAMEXT[13:6] -> CAM[7:0]
  * @clk_pol: Pixel clock polarity
  *		0 - Non Inverted, 1 - Inverted
+ * @hs_pol: Horizontal synchronization polarity
+ *		0 - Active high, 1 - Active low
+ * @vs_pol: Vertical synchronization polarity
+ *		0 - Active high, 1 - Active low
  * @bridge: CCDC Bridge input control
  *		ISPCTRL_PAR_BRIDGE_DISABLE - Disable
  *		ISPCTRL_PAR_BRIDGE_LENDIAN - Little endian
@@ -147,6 +151,8 @@ struct isp_reg {
 struct isp_parallel_platform_data {
 	unsigned int data_lane_shift:2;
 	unsigned int clk_pol:1;
+	unsigned int hs_pol:1;
+	unsigned int vs_pol:1;
 	unsigned int bridge:4;
 };
 
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 39d501bda63..9d3459de04b 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1148,6 +1148,8 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc)
 	omap3isp_configure_bridge(isp, ccdc->input, pdata, shift);
 
 	ccdc->syncif.datsz = depth_out;
+	ccdc->syncif.hdpol = pdata ? pdata->hs_pol : 0;
+	ccdc->syncif.vdpol = pdata ? pdata->vs_pol : 0;
 	ccdc_config_sync_if(ccdc, &ccdc->syncif);
 
 	/* CCDC_PAD_SINK */
@@ -1691,7 +1693,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
 	if (sub->type != V4L2_EVENT_OMAP3ISP_HS_VS)
 		return -EINVAL;
 
-	return v4l2_event_subscribe(fh, sub);
+	return v4l2_event_subscribe(fh, sub, OMAP3ISP_CCDC_NEVENTS);
 }
 
 static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
@@ -2162,7 +2164,6 @@ static int ccdc_init_entities(struct isp_ccdc_device *ccdc)
 	sd->grp_id = 1 << 16;	/* group ID for isp subdevs */
 	v4l2_set_subdevdata(sd, ccdc);
 	sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
-	sd->nevents = OMAP3ISP_CCDC_NEVENTS;
 
 	pads[CCDC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
 	pads[CCDC_PAD_SOURCE_VP].flags = MEDIA_PAD_FL_SOURCE;
@@ -2257,8 +2258,6 @@ int omap3isp_ccdc_init(struct isp_device *isp)
 	ccdc->syncif.fldout = 0;
 	ccdc->syncif.fldpol = 0;
 	ccdc->syncif.fldstat = 0;
-	ccdc->syncif.hdpol = 0;
-	ccdc->syncif.vdpol = 0;
 
 	ccdc->clamp.oblen = 0;
 	ccdc->clamp.dcsubval = 0;
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index 0e16cab8e08..ec9e395f333 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
+#include <linux/regulator/consumer.h>
 
 #include "isp.h"
 #include "ispreg.h"
@@ -163,6 +164,9 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
 	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
 	int i;
 
+	if (enable && ccp2->vdds_csib)
+		regulator_enable(ccp2->vdds_csib);
+
 	/* Enable/Disable all the LCx channels */
 	for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
 		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
@@ -186,6 +190,9 @@ static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
 				    ISPCCP2_LC01_IRQENABLE,
 				    ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ);
 	}
+
+	if (!enable && ccp2->vdds_csib)
+		regulator_disable(ccp2->vdds_csib);
 }
 
 /*
@@ -1137,6 +1144,9 @@ error:
  */
 void omap3isp_ccp2_cleanup(struct isp_device *isp)
 {
+	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
+
+	regulator_put(ccp2->vdds_csib);
 }
 
 /*
@@ -1151,14 +1161,27 @@ int omap3isp_ccp2_init(struct isp_device *isp)
 
 	init_waitqueue_head(&ccp2->wait);
 
-	/* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
+	/*
+	 * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
+	 * complex, which is powered by vdds_csib power rail. Hence the
+	 * request for the regulator.
+	 *
+	 * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
 	 * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
 	 * configured.
 	 *
 	 * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
 	 */
-	if (isp->revision == ISP_REVISION_15_0)
+	if (isp->revision == ISP_REVISION_2_0) {
+		ccp2->vdds_csib = regulator_get(isp->dev, "vdds_csib");
+		if (IS_ERR(ccp2->vdds_csib)) {
+			dev_dbg(isp->dev,
+				"Could not get regulator vdds_csib\n");
+			ccp2->vdds_csib = NULL;
+		}
+	} else if (isp->revision == ISP_REVISION_15_0) {
 		ccp2->phy = &isp->isp_csiphy1;
+	}
 
 	ret = ccp2_init_entities(ccp2);
 	if (ret < 0)
diff --git a/drivers/media/video/omap3isp/ispccp2.h b/drivers/media/video/omap3isp/ispccp2.h
index 5505a86a9a7..6674e9de2cd 100644
--- a/drivers/media/video/omap3isp/ispccp2.h
+++ b/drivers/media/video/omap3isp/ispccp2.h
@@ -81,6 +81,7 @@ struct isp_ccp2_device {
 	struct isp_interface_mem_config mem_cfg;
 	struct isp_video video_in;
 	struct isp_csiphy *phy;
+	struct regulator *vdds_csib;
 	unsigned int error;
 	enum isp_pipeline_stream_state state;
 	wait_queue_head_t wait;
diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c
index b44cb685236..808065948ac 100644
--- a/drivers/media/video/omap3isp/ispstat.c
+++ b/drivers/media/video/omap3isp/ispstat.c
@@ -1032,7 +1032,6 @@ static int isp_stat_init_entities(struct ispstat *stat, const char *name,
 	snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
 	subdev->grp_id = 1 << 16;	/* group ID for isp subdevs */
 	subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
-	subdev->nevents = STAT_NEVENTS;
 	v4l2_set_subdevdata(subdev, stat);
 
 	stat->pad.flags = MEDIA_PAD_FL_SINK;
@@ -1050,7 +1049,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
 	if (sub->type != stat->event_type)
 		return -EINVAL;
 
-	return v4l2_event_subscribe(fh, sub);
+	return v4l2_event_subscribe(fh, sub, STAT_NEVENTS);
 }
 
 int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev,
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 9cd8f1aa567..fd965adfd59 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -695,7 +695,6 @@ isp_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
 	strlcpy(cap->driver, ISP_VIDEO_DRIVER_NAME, sizeof(cap->driver));
 	strlcpy(cap->card, video->video.name, sizeof(cap->card));
 	strlcpy(cap->bus_info, "media", sizeof(cap->bus_info));
-	cap->version = ISP_VIDEO_DRIVER_VERSION;
 
 	if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index 911bea64e78..53160aa24e6 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -27,7 +27,6 @@
 #define OMAP3_ISP_VIDEO_H
 
 #include <linux/v4l2-mediabus.h>
-#include <linux/version.h>
 #include <media/media-entity.h>
 #include <media/v4l2-dev.h>
 #include <media/v4l2-fh.h>
@@ -35,7 +34,7 @@
 #include "ispqueue.h"
 
 #define ISP_VIDEO_DRIVER_NAME		"ispvideo"
-#define ISP_VIDEO_DRIVER_VERSION	KERNEL_VERSION(0, 0, 1)
+#define ISP_VIDEO_DRIVER_VERSION	"0.0.2"
 
 struct isp_device;
 struct isp_video;
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
index 0cea0cf3667..9ce2fa037b9 100644
--- a/drivers/media/video/ov2640.c
+++ b/drivers/media/video/ov2640.c
@@ -1031,16 +1031,9 @@ static int ov2640_video_probe(struct soc_camera_device *icd,
 	const char *devname;
 	int ret;
 
-	/*
-	 * we must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
-		dev_err(&client->dev, "Parent missing or invalid!\n");
-		ret = -ENODEV;
-		goto err;
-	}
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c
new file mode 100644
index 00000000000..349a4ad3ccc
--- /dev/null
+++ b/drivers/media/video/ov5642.c
@@ -0,0 +1,1012 @@
+/*
+ * Driver for OV5642 CMOS Image Sensor from Omnivision
+ *
+ * Copyright (C) 2011, Bastian Hecht <hechtb@gmail.com>
+ *
+ * Based on Sony IMX074 Camera Driver
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * Based on Omnivision OV7670 Camera Driver
+ * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/module.h>
+
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
+
+/* OV5642 registers */
+#define REG_CHIP_ID_HIGH		0x300a
+#define REG_CHIP_ID_LOW			0x300b
+
+#define REG_WINDOW_START_X_HIGH		0x3800
+#define REG_WINDOW_START_X_LOW		0x3801
+#define REG_WINDOW_START_Y_HIGH		0x3802
+#define REG_WINDOW_START_Y_LOW		0x3803
+#define REG_WINDOW_WIDTH_HIGH		0x3804
+#define REG_WINDOW_WIDTH_LOW		0x3805
+#define REG_WINDOW_HEIGHT_HIGH 		0x3806
+#define REG_WINDOW_HEIGHT_LOW		0x3807
+#define REG_OUT_WIDTH_HIGH		0x3808
+#define REG_OUT_WIDTH_LOW		0x3809
+#define REG_OUT_HEIGHT_HIGH		0x380a
+#define REG_OUT_HEIGHT_LOW		0x380b
+#define REG_OUT_TOTAL_WIDTH_HIGH	0x380c
+#define REG_OUT_TOTAL_WIDTH_LOW		0x380d
+#define REG_OUT_TOTAL_HEIGHT_HIGH	0x380e
+#define REG_OUT_TOTAL_HEIGHT_LOW	0x380f
+
+/*
+ * define standard resolution.
+ * Works currently only for up to 720 lines
+ * eg. 320x240, 640x480, 800x600, 1280x720, 2048x720
+ */
+
+#define OV5642_WIDTH		1280
+#define OV5642_HEIGHT		720
+#define OV5642_TOTAL_WIDTH	3200
+#define OV5642_TOTAL_HEIGHT	2000
+#define OV5642_SENSOR_SIZE_X	2592
+#define OV5642_SENSOR_SIZE_Y	1944
+
+struct regval_list {
+	u16 reg_num;
+	u8 value;
+};
+
+static struct regval_list ov5642_default_regs_init[] = {
+	{ 0x3103, 0x93 },
+	{ 0x3008, 0x82 },
+	{ 0x3017, 0x7f },
+	{ 0x3018, 0xfc },
+	{ 0x3810, 0xc2 },
+	{ 0x3615, 0xf0 },
+	{ 0x3000, 0x0  },
+	{ 0x3001, 0x0  },
+	{ 0x3002, 0x0  },
+	{ 0x3003, 0x0  },
+	{ 0x3004, 0xff },
+	{ 0x3030, 0x2b },
+	{ 0x3011, 0x8  },
+	{ 0x3010, 0x10 },
+	{ 0x3604, 0x60 },
+	{ 0x3622, 0x60 },
+	{ 0x3621, 0x9  },
+	{ 0x3709, 0x0  },
+	{ 0x4000, 0x21 },
+	{ 0x401d, 0x22 },
+	{ 0x3600, 0x54 },
+	{ 0x3605, 0x4  },
+	{ 0x3606, 0x3f },
+	{ 0x3c01, 0x80 },
+	{ 0x300d, 0x22 },
+	{ 0x3623, 0x22 },
+	{ 0x5000, 0x4f },
+	{ 0x5020, 0x4  },
+	{ 0x5181, 0x79 },
+	{ 0x5182, 0x0  },
+	{ 0x5185, 0x22 },
+	{ 0x5197, 0x1  },
+	{ 0x5500, 0xa  },
+	{ 0x5504, 0x0  },
+	{ 0x5505, 0x7f },
+	{ 0x5080, 0x8  },
+	{ 0x300e, 0x18 },
+	{ 0x4610, 0x0  },
+	{ 0x471d, 0x5  },
+	{ 0x4708, 0x6  },
+	{ 0x370c, 0xa0 },
+	{ 0x5687, 0x94 },
+	{ 0x501f, 0x0  },
+	{ 0x5000, 0x4f },
+	{ 0x5001, 0xcf },
+	{ 0x4300, 0x30 },
+	{ 0x4300, 0x30 },
+	{ 0x460b, 0x35 },
+	{ 0x471d, 0x0  },
+	{ 0x3002, 0xc  },
+	{ 0x3002, 0x0  },
+	{ 0x4713, 0x3  },
+	{ 0x471c, 0x50 },
+	{ 0x4721, 0x2  },
+	{ 0x4402, 0x90 },
+	{ 0x460c, 0x22 },
+	{ 0x3815, 0x44 },
+	{ 0x3503, 0x7  },
+	{ 0x3501, 0x73 },
+	{ 0x3502, 0x80 },
+	{ 0x350b, 0x0  },
+	{ 0x3818, 0xc8 },
+	{ 0x3824, 0x11 },
+	{ 0x3a00, 0x78 },
+	{ 0x3a1a, 0x4  },
+	{ 0x3a13, 0x30 },
+	{ 0x3a18, 0x0  },
+	{ 0x3a19, 0x7c },
+	{ 0x3a08, 0x12 },
+	{ 0x3a09, 0xc0 },
+	{ 0x3a0a, 0xf  },
+	{ 0x3a0b, 0xa0 },
+	{ 0x350c, 0x7  },
+	{ 0x350d, 0xd0 },
+	{ 0x3a0d, 0x8  },
+	{ 0x3a0e, 0x6  },
+	{ 0x3500, 0x0  },
+	{ 0x3501, 0x0  },
+	{ 0x3502, 0x0  },
+	{ 0x350a, 0x0  },
+	{ 0x350b, 0x0  },
+	{ 0x3503, 0x0  },
+	{ 0x3a0f, 0x3c },
+	{ 0x3a10, 0x32 },
+	{ 0x3a1b, 0x3c },
+	{ 0x3a1e, 0x32 },
+	{ 0x3a11, 0x80 },
+	{ 0x3a1f, 0x20 },
+	{ 0x3030, 0x2b },
+	{ 0x3a02, 0x0  },
+	{ 0x3a03, 0x7d },
+	{ 0x3a04, 0x0  },
+	{ 0x3a14, 0x0  },
+	{ 0x3a15, 0x7d },
+	{ 0x3a16, 0x0  },
+	{ 0x3a00, 0x78 },
+	{ 0x3a08, 0x9  },
+	{ 0x3a09, 0x60 },
+	{ 0x3a0a, 0x7  },
+	{ 0x3a0b, 0xd0 },
+	{ 0x3a0d, 0x10 },
+	{ 0x3a0e, 0xd  },
+	{ 0x4407, 0x4  },
+	{ 0x5193, 0x70 },
+	{ 0x589b, 0x0  },
+	{ 0x589a, 0xc0 },
+	{ 0x401e, 0x20 },
+	{ 0x4001, 0x42 },
+	{ 0x401c, 0x6  },
+	{ 0x3825, 0xac },
+	{ 0x3827, 0xc  },
+	{ 0x528a, 0x1  },
+	{ 0x528b, 0x4  },
+	{ 0x528c, 0x8  },
+	{ 0x528d, 0x10 },
+	{ 0x528e, 0x20 },
+	{ 0x528f, 0x28 },
+	{ 0x5290, 0x30 },
+	{ 0x5292, 0x0  },
+	{ 0x5293, 0x1  },
+	{ 0x5294, 0x0  },
+	{ 0x5295, 0x4  },
+	{ 0x5296, 0x0  },
+	{ 0x5297, 0x8  },
+	{ 0x5298, 0x0  },
+	{ 0x5299, 0x10 },
+	{ 0x529a, 0x0  },
+	{ 0x529b, 0x20 },
+	{ 0x529c, 0x0  },
+	{ 0x529d, 0x28 },
+	{ 0x529e, 0x0  },
+	{ 0x529f, 0x30 },
+	{ 0x5282, 0x0  },
+	{ 0x5300, 0x0  },
+	{ 0x5301, 0x20 },
+	{ 0x5302, 0x0  },
+	{ 0x5303, 0x7c },
+	{ 0x530c, 0x0  },
+	{ 0x530d, 0xc  },
+	{ 0x530e, 0x20 },
+	{ 0x530f, 0x80 },
+	{ 0x5310, 0x20 },
+	{ 0x5311, 0x80 },
+	{ 0x5308, 0x20 },
+	{ 0x5309, 0x40 },
+	{ 0x5304, 0x0  },
+	{ 0x5305, 0x30 },
+	{ 0x5306, 0x0  },
+	{ 0x5307, 0x80 },
+	{ 0x5314, 0x8  },
+	{ 0x5315, 0x20 },
+	{ 0x5319, 0x30 },
+	{ 0x5316, 0x10 },
+	{ 0x5317, 0x0  },
+	{ 0x5318, 0x2  },
+	{ 0x5380, 0x1  },
+	{ 0x5381, 0x0  },
+	{ 0x5382, 0x0  },
+	{ 0x5383, 0x4e },
+	{ 0x5384, 0x0  },
+	{ 0x5385, 0xf  },
+	{ 0x5386, 0x0  },
+	{ 0x5387, 0x0  },
+	{ 0x5388, 0x1  },
+	{ 0x5389, 0x15 },
+	{ 0x538a, 0x0  },
+	{ 0x538b, 0x31 },
+	{ 0x538c, 0x0  },
+	{ 0x538d, 0x0  },
+	{ 0x538e, 0x0  },
+	{ 0x538f, 0xf  },
+	{ 0x5390, 0x0  },
+	{ 0x5391, 0xab },
+	{ 0x5392, 0x0  },
+	{ 0x5393, 0xa2 },
+	{ 0x5394, 0x8  },
+	{ 0x5480, 0x14 },
+	{ 0x5481, 0x21 },
+	{ 0x5482, 0x36 },
+	{ 0x5483, 0x57 },
+	{ 0x5484, 0x65 },
+	{ 0x5485, 0x71 },
+	{ 0x5486, 0x7d },
+	{ 0x5487, 0x87 },
+	{ 0x5488, 0x91 },
+	{ 0x5489, 0x9a },
+	{ 0x548a, 0xaa },
+	{ 0x548b, 0xb8 },
+	{ 0x548c, 0xcd },
+	{ 0x548d, 0xdd },
+	{ 0x548e, 0xea },
+	{ 0x548f, 0x1d },
+	{ 0x5490, 0x5  },
+	{ 0x5491, 0x0  },
+	{ 0x5492, 0x4  },
+	{ 0x5493, 0x20 },
+	{ 0x5494, 0x3  },
+	{ 0x5495, 0x60 },
+	{ 0x5496, 0x2  },
+	{ 0x5497, 0xb8 },
+	{ 0x5498, 0x2  },
+	{ 0x5499, 0x86 },
+	{ 0x549a, 0x2  },
+	{ 0x549b, 0x5b },
+	{ 0x549c, 0x2  },
+	{ 0x549d, 0x3b },
+	{ 0x549e, 0x2  },
+	{ 0x549f, 0x1c },
+	{ 0x54a0, 0x2  },
+	{ 0x54a1, 0x4  },
+	{ 0x54a2, 0x1  },
+	{ 0x54a3, 0xed },
+	{ 0x54a4, 0x1  },
+	{ 0x54a5, 0xc5 },
+	{ 0x54a6, 0x1  },
+	{ 0x54a7, 0xa5 },
+	{ 0x54a8, 0x1  },
+	{ 0x54a9, 0x6c },
+	{ 0x54aa, 0x1  },
+	{ 0x54ab, 0x41 },
+	{ 0x54ac, 0x1  },
+	{ 0x54ad, 0x20 },
+	{ 0x54ae, 0x0  },
+	{ 0x54af, 0x16 },
+	{ 0x54b0, 0x1  },
+	{ 0x54b1, 0x20 },
+	{ 0x54b2, 0x0  },
+	{ 0x54b3, 0x10 },
+	{ 0x54b4, 0x0  },
+	{ 0x54b5, 0xf0 },
+	{ 0x54b6, 0x0  },
+	{ 0x54b7, 0xdf },
+	{ 0x5402, 0x3f },
+	{ 0x5403, 0x0  },
+	{ 0x3406, 0x0  },
+	{ 0x5180, 0xff },
+	{ 0x5181, 0x52 },
+	{ 0x5182, 0x11 },
+	{ 0x5183, 0x14 },
+	{ 0x5184, 0x25 },
+	{ 0x5185, 0x24 },
+	{ 0x5186, 0x6  },
+	{ 0x5187, 0x8  },
+	{ 0x5188, 0x8  },
+	{ 0x5189, 0x7c },
+	{ 0x518a, 0x60 },
+	{ 0x518b, 0xb2 },
+	{ 0x518c, 0xb2 },
+	{ 0x518d, 0x44 },
+	{ 0x518e, 0x3d },
+	{ 0x518f, 0x58 },
+	{ 0x5190, 0x46 },
+	{ 0x5191, 0xf8 },
+	{ 0x5192, 0x4  },
+	{ 0x5193, 0x70 },
+	{ 0x5194, 0xf0 },
+	{ 0x5195, 0xf0 },
+	{ 0x5196, 0x3  },
+	{ 0x5197, 0x1  },
+	{ 0x5198, 0x4  },
+	{ 0x5199, 0x12 },
+	{ 0x519a, 0x4  },
+	{ 0x519b, 0x0  },
+	{ 0x519c, 0x6  },
+	{ 0x519d, 0x82 },
+	{ 0x519e, 0x0  },
+	{ 0x5025, 0x80 },
+	{ 0x3a0f, 0x38 },
+	{ 0x3a10, 0x30 },
+	{ 0x3a1b, 0x3a },
+	{ 0x3a1e, 0x2e },
+	{ 0x3a11, 0x60 },
+	{ 0x3a1f, 0x10 },
+	{ 0x5688, 0xa6 },
+	{ 0x5689, 0x6a },
+	{ 0x568a, 0xea },
+	{ 0x568b, 0xae },
+	{ 0x568c, 0xa6 },
+	{ 0x568d, 0x6a },
+	{ 0x568e, 0x62 },
+	{ 0x568f, 0x26 },
+	{ 0x5583, 0x40 },
+	{ 0x5584, 0x40 },
+	{ 0x5580, 0x2  },
+	{ 0x5000, 0xcf },
+	{ 0x5800, 0x27 },
+	{ 0x5801, 0x19 },
+	{ 0x5802, 0x12 },
+	{ 0x5803, 0xf  },
+	{ 0x5804, 0x10 },
+	{ 0x5805, 0x15 },
+	{ 0x5806, 0x1e },
+	{ 0x5807, 0x2f },
+	{ 0x5808, 0x15 },
+	{ 0x5809, 0xd  },
+	{ 0x580a, 0xa  },
+	{ 0x580b, 0x9  },
+	{ 0x580c, 0xa  },
+	{ 0x580d, 0xc  },
+	{ 0x580e, 0x12 },
+	{ 0x580f, 0x19 },
+	{ 0x5810, 0xb  },
+	{ 0x5811, 0x7  },
+	{ 0x5812, 0x4  },
+	{ 0x5813, 0x3  },
+	{ 0x5814, 0x3  },
+	{ 0x5815, 0x6  },
+	{ 0x5816, 0xa  },
+	{ 0x5817, 0xf  },
+	{ 0x5818, 0xa  },
+	{ 0x5819, 0x5  },
+	{ 0x581a, 0x1  },
+	{ 0x581b, 0x0  },
+	{ 0x581c, 0x0  },
+	{ 0x581d, 0x3  },
+	{ 0x581e, 0x8  },
+	{ 0x581f, 0xc  },
+	{ 0x5820, 0xa  },
+	{ 0x5821, 0x5  },
+	{ 0x5822, 0x1  },
+	{ 0x5823, 0x0  },
+	{ 0x5824, 0x0  },
+	{ 0x5825, 0x3  },
+	{ 0x5826, 0x8  },
+	{ 0x5827, 0xc  },
+	{ 0x5828, 0xe  },
+	{ 0x5829, 0x8  },
+	{ 0x582a, 0x6  },
+	{ 0x582b, 0x4  },
+	{ 0x582c, 0x5  },
+	{ 0x582d, 0x7  },
+	{ 0x582e, 0xb  },
+	{ 0x582f, 0x12 },
+	{ 0x5830, 0x18 },
+	{ 0x5831, 0x10 },
+	{ 0x5832, 0xc  },
+	{ 0x5833, 0xa  },
+	{ 0x5834, 0xb  },
+	{ 0x5835, 0xe  },
+	{ 0x5836, 0x15 },
+	{ 0x5837, 0x19 },
+	{ 0x5838, 0x32 },
+	{ 0x5839, 0x1f },
+	{ 0x583a, 0x18 },
+	{ 0x583b, 0x16 },
+	{ 0x583c, 0x17 },
+	{ 0x583d, 0x1e },
+	{ 0x583e, 0x26 },
+	{ 0x583f, 0x53 },
+	{ 0x5840, 0x10 },
+	{ 0x5841, 0xf  },
+	{ 0x5842, 0xd  },
+	{ 0x5843, 0xc  },
+	{ 0x5844, 0xe  },
+	{ 0x5845, 0x9  },
+	{ 0x5846, 0x11 },
+	{ 0x5847, 0x10 },
+	{ 0x5848, 0x10 },
+	{ 0x5849, 0x10 },
+	{ 0x584a, 0x10 },
+	{ 0x584b, 0xe  },
+	{ 0x584c, 0x10 },
+	{ 0x584d, 0x10 },
+	{ 0x584e, 0x11 },
+	{ 0x584f, 0x10 },
+	{ 0x5850, 0xf  },
+	{ 0x5851, 0xc  },
+	{ 0x5852, 0xf  },
+	{ 0x5853, 0x10 },
+	{ 0x5854, 0x10 },
+	{ 0x5855, 0xf  },
+	{ 0x5856, 0xe  },
+	{ 0x5857, 0xb  },
+	{ 0x5858, 0x10 },
+	{ 0x5859, 0xd  },
+	{ 0x585a, 0xd  },
+	{ 0x585b, 0xc  },
+	{ 0x585c, 0xc  },
+	{ 0x585d, 0xc  },
+	{ 0x585e, 0xb  },
+	{ 0x585f, 0xc  },
+	{ 0x5860, 0xc  },
+	{ 0x5861, 0xc  },
+	{ 0x5862, 0xd  },
+	{ 0x5863, 0x8  },
+	{ 0x5864, 0x11 },
+	{ 0x5865, 0x18 },
+	{ 0x5866, 0x18 },
+	{ 0x5867, 0x19 },
+	{ 0x5868, 0x17 },
+	{ 0x5869, 0x19 },
+	{ 0x586a, 0x16 },
+	{ 0x586b, 0x13 },
+	{ 0x586c, 0x13 },
+	{ 0x586d, 0x12 },
+	{ 0x586e, 0x13 },
+	{ 0x586f, 0x16 },
+	{ 0x5870, 0x14 },
+	{ 0x5871, 0x12 },
+	{ 0x5872, 0x10 },
+	{ 0x5873, 0x11 },
+	{ 0x5874, 0x11 },
+	{ 0x5875, 0x16 },
+	{ 0x5876, 0x14 },
+	{ 0x5877, 0x11 },
+	{ 0x5878, 0x10 },
+	{ 0x5879, 0xf  },
+	{ 0x587a, 0x10 },
+	{ 0x587b, 0x14 },
+	{ 0x587c, 0x13 },
+	{ 0x587d, 0x12 },
+	{ 0x587e, 0x11 },
+	{ 0x587f, 0x11 },
+	{ 0x5880, 0x12 },
+	{ 0x5881, 0x15 },
+	{ 0x5882, 0x14 },
+	{ 0x5883, 0x15 },
+	{ 0x5884, 0x15 },
+	{ 0x5885, 0x15 },
+	{ 0x5886, 0x13 },
+	{ 0x5887, 0x17 },
+	{ 0x3710, 0x10 },
+	{ 0x3632, 0x51 },
+	{ 0x3702, 0x10 },
+	{ 0x3703, 0xb2 },
+	{ 0x3704, 0x18 },
+	{ 0x370b, 0x40 },
+	{ 0x370d, 0x3  },
+	{ 0x3631, 0x1  },
+	{ 0x3632, 0x52 },
+	{ 0x3606, 0x24 },
+	{ 0x3620, 0x96 },
+	{ 0x5785, 0x7  },
+	{ 0x3a13, 0x30 },
+	{ 0x3600, 0x52 },
+	{ 0x3604, 0x48 },
+	{ 0x3606, 0x1b },
+	{ 0x370d, 0xb  },
+	{ 0x370f, 0xc0 },
+	{ 0x3709, 0x1  },
+	{ 0x3823, 0x0  },
+	{ 0x5007, 0x0  },
+	{ 0x5009, 0x0  },
+	{ 0x5011, 0x0  },
+	{ 0x5013, 0x0  },
+	{ 0x519e, 0x0  },
+	{ 0x5086, 0x0  },
+	{ 0x5087, 0x0  },
+	{ 0x5088, 0x0  },
+	{ 0x5089, 0x0  },
+	{ 0x302b, 0x0  },
+	{ 0x3503, 0x7  },
+	{ 0x3011, 0x8  },
+	{ 0x350c, 0x2  },
+	{ 0x350d, 0xe4 },
+	{ 0x3621, 0xc9 },
+	{ 0x370a, 0x81 },
+	{ 0xffff, 0xff },
+};
+
+static struct regval_list ov5642_default_regs_finalise[] = {
+	{ 0x3810, 0xc2 },
+	{ 0x3818, 0xc9 },
+	{ 0x381c, 0x10 },
+	{ 0x381d, 0xa0 },
+	{ 0x381e, 0x5  },
+	{ 0x381f, 0xb0 },
+	{ 0x3820, 0x0  },
+	{ 0x3821, 0x0  },
+	{ 0x3824, 0x11 },
+	{ 0x3a08, 0x1b },
+	{ 0x3a09, 0xc0 },
+	{ 0x3a0a, 0x17 },
+	{ 0x3a0b, 0x20 },
+	{ 0x3a0d, 0x2  },
+	{ 0x3a0e, 0x1  },
+	{ 0x401c, 0x4  },
+	{ 0x5682, 0x5  },
+	{ 0x5683, 0x0  },
+	{ 0x5686, 0x2  },
+	{ 0x5687, 0xcc },
+	{ 0x5001, 0x4f },
+	{ 0x589b, 0x6  },
+	{ 0x589a, 0xc5 },
+	{ 0x3503, 0x0  },
+	{ 0x460c, 0x20 },
+	{ 0x460b, 0x37 },
+	{ 0x471c, 0xd0 },
+	{ 0x471d, 0x5  },
+	{ 0x3815, 0x1  },
+	{ 0x3818, 0xc1 },
+	{ 0x501f, 0x0  },
+	{ 0x5002, 0xe0 },
+	{ 0x4300, 0x32 }, /* UYVY */
+	{ 0x3002, 0x1c },
+	{ 0x4800, 0x14 },
+	{ 0x4801, 0xf  },
+	{ 0x3007, 0x3b },
+	{ 0x300e, 0x4  },
+	{ 0x4803, 0x50 },
+	{ 0x3815, 0x1  },
+	{ 0x4713, 0x2  },
+	{ 0x4842, 0x1  },
+	{ 0x300f, 0xe  },
+	{ 0x3003, 0x3  },
+	{ 0x3003, 0x1  },
+	{ 0xffff, 0xff },
+};
+
+struct ov5642_datafmt {
+	enum v4l2_mbus_pixelcode	code;
+	enum v4l2_colorspace		colorspace;
+};
+
+struct ov5642 {
+	struct v4l2_subdev		subdev;
+	const struct ov5642_datafmt	*fmt;
+};
+
+static const struct ov5642_datafmt ov5642_colour_fmts[] = {
+	{V4L2_MBUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_JPEG},
+};
+
+static struct ov5642 *to_ov5642(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct ov5642, subdev);
+}
+
+/* Find a data format by a pixel code in an array */
+static const struct ov5642_datafmt
+			*ov5642_find_datafmt(enum v4l2_mbus_pixelcode code)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ov5642_colour_fmts); i++)
+		if (ov5642_colour_fmts[i].code == code)
+			return ov5642_colour_fmts + i;
+
+	return NULL;
+}
+
+static int reg_read(struct i2c_client *client, u16 reg, u8 *val)
+{
+	int ret;
+	/* We have 16-bit i2c addresses - care for endianess */
+	unsigned char data[2] = { reg >> 8, reg & 0xff };
+
+	ret = i2c_master_send(client, data, 2);
+	if (ret < 2) {
+		dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
+			__func__, reg);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	ret = i2c_master_recv(client, val, 1);
+	if (ret < 1) {
+		dev_err(&client->dev, "%s: i2c read error, reg: %x\n",
+				__func__, reg);
+		return ret < 0 ? ret : -EIO;
+	}
+	return 0;
+}
+
+static int reg_write(struct i2c_client *client, u16 reg, u8 val)
+{
+	int ret;
+	unsigned char data[3] = { reg >> 8, reg & 0xff, val };
+
+	ret = i2c_master_send(client, data, 3);
+	if (ret < 3) {
+		dev_err(&client->dev, "%s: i2c write error, reg: %x\n",
+			__func__, reg);
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov5642_get_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+	u8 val;
+
+	if (reg->reg & ~0xffff)
+		return -EINVAL;
+
+	reg->size = 1;
+
+	ret = reg_read(client, reg->reg, &val);
+	if (!ret)
+		reg->val = (__u64)val;
+
+	return ret;
+}
+
+static int ov5642_set_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg & ~0xffff || reg->val & ~0xff)
+		return -EINVAL;
+
+	return reg_write(client, reg->reg, reg->val);
+}
+#endif
+
+static int ov5642_write_array(struct i2c_client *client,
+				struct regval_list *vals)
+{
+	while (vals->reg_num != 0xffff || vals->value != 0xff) {
+		int ret = reg_write(client, vals->reg_num, vals->value);
+		if (ret < 0)
+			return ret;
+		vals++;
+	}
+	dev_dbg(&client->dev, "Register list loaded\n");
+	return 0;
+}
+
+static int ov5642_set_resolution(struct i2c_client *client)
+{
+	int ret;
+	u8 start_x_high = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) >> 8;
+	u8 start_x_low  = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) & 0xff;
+	u8 start_y_high = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) >> 8;
+	u8 start_y_low  = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) & 0xff;
+
+	u8 width_high	= OV5642_WIDTH  >> 8;
+	u8 width_low	= OV5642_WIDTH  & 0xff;
+	u8 height_high	= OV5642_HEIGHT >> 8;
+	u8 height_low	= OV5642_HEIGHT & 0xff;
+
+	u8 total_width_high  = OV5642_TOTAL_WIDTH  >> 8;
+	u8 total_width_low   = OV5642_TOTAL_WIDTH  & 0xff;
+	u8 total_height_high = OV5642_TOTAL_HEIGHT >> 8;
+	u8 total_height_low  = OV5642_TOTAL_HEIGHT & 0xff;
+
+	ret = reg_write(client, REG_WINDOW_START_X_HIGH, start_x_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_START_X_LOW, start_x_low);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_START_Y_HIGH, start_y_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_START_Y_LOW, start_y_low);
+
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_WIDTH_HIGH, width_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_WIDTH_LOW , width_low);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_HEIGHT_HIGH, height_high);
+	if (!ret)
+		ret = reg_write(client, REG_WINDOW_HEIGHT_LOW,  height_low);
+
+	if (!ret)
+		ret = reg_write(client, REG_OUT_WIDTH_HIGH, width_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_WIDTH_LOW , width_low);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_HEIGHT_HIGH, height_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_HEIGHT_LOW,  height_low);
+
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_WIDTH_LOW, total_width_low);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height_high);
+	if (!ret)
+		ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_LOW,  total_height_low);
+
+	return ret;
+}
+
+static int ov5642_try_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *mf)
+{
+	const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code);
+
+	dev_dbg(sd->v4l2_dev->dev, "%s(%u) width: %u heigth: %u\n",
+			__func__, mf->code, mf->width, mf->height);
+
+	if (!fmt) {
+		mf->code	= ov5642_colour_fmts[0].code;
+		mf->colorspace	= ov5642_colour_fmts[0].colorspace;
+	}
+
+	mf->width	= OV5642_WIDTH;
+	mf->height	= OV5642_HEIGHT;
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov5642_s_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
+
+	dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
+
+	/* MIPI CSI could have changed the format, double-check */
+	if (!ov5642_find_datafmt(mf->code))
+		return -EINVAL;
+
+	ov5642_try_fmt(sd, mf);
+
+	priv->fmt = ov5642_find_datafmt(mf->code);
+
+	ov5642_write_array(client, ov5642_default_regs_init);
+	ov5642_set_resolution(client);
+	ov5642_write_array(client, ov5642_default_regs_finalise);
+
+	return 0;
+}
+
+static int ov5642_g_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov5642 *priv = to_ov5642(client);
+
+	const struct ov5642_datafmt *fmt = priv->fmt;
+
+	mf->code	= fmt->code;
+	mf->colorspace	= fmt->colorspace;
+	mf->width	= OV5642_WIDTH;
+	mf->height	= OV5642_HEIGHT;
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov5642_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+			   enum v4l2_mbus_pixelcode *code)
+{
+	if (index >= ARRAY_SIZE(ov5642_colour_fmts))
+		return -EINVAL;
+
+	*code = ov5642_colour_fmts[index].code;
+	return 0;
+}
+
+static int ov5642_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
+		return -EINVAL;
+
+	if (id->match.addr != client->addr)
+		return -ENODEV;
+
+	id->ident	= V4L2_IDENT_OV5642;
+	id->revision	= 0;
+
+	return 0;
+}
+
+static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	struct v4l2_rect *rect = &a->c;
+
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	rect->top	= 0;
+	rect->left	= 0;
+	rect->width	= OV5642_WIDTH;
+	rect->height	= OV5642_HEIGHT;
+
+	return 0;
+}
+
+static int ov5642_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= OV5642_WIDTH;
+	a->bounds.height		= OV5642_HEIGHT;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = {
+	.s_mbus_fmt	= ov5642_s_fmt,
+	.g_mbus_fmt	= ov5642_g_fmt,
+	.try_mbus_fmt	= ov5642_try_fmt,
+	.enum_mbus_fmt	= ov5642_enum_fmt,
+	.g_crop		= ov5642_g_crop,
+	.cropcap	= ov5642_cropcap,
+};
+
+static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = {
+	.g_chip_ident	= ov5642_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= ov5642_get_register,
+	.s_register	= ov5642_set_register,
+#endif
+};
+
+static struct v4l2_subdev_ops ov5642_subdev_ops = {
+	.core	= &ov5642_subdev_core_ops,
+	.video	= &ov5642_subdev_video_ops,
+};
+
+/*
+ * We have to provide soc-camera operations, but we don't have anything to say
+ * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param
+ */
+static unsigned long soc_ov5642_query_bus_param(struct soc_camera_device *icd)
+{
+	return 0;
+}
+
+static int soc_ov5642_set_bus_param(struct soc_camera_device *icd,
+				 unsigned long flags)
+{
+	return -EINVAL;
+}
+
+static struct soc_camera_ops soc_ov5642_ops = {
+	.query_bus_param	= soc_ov5642_query_bus_param,
+	.set_bus_param		= soc_ov5642_set_bus_param,
+};
+
+static int ov5642_video_probe(struct soc_camera_device *icd,
+			      struct i2c_client *client)
+{
+	int ret;
+	u8 id_high, id_low;
+	u16 id;
+
+	/* Read sensor Model ID */
+	ret = reg_read(client, REG_CHIP_ID_HIGH, &id_high);
+	if (ret < 0)
+		return ret;
+
+	id = id_high << 8;
+
+	ret = reg_read(client, REG_CHIP_ID_LOW, &id_low);
+	if (ret < 0)
+		return ret;
+
+	id |= id_low;
+
+	dev_info(&client->dev, "Chip ID 0x%04x detected\n", id);
+
+	if (id != 0x5642)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int ov5642_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov5642 *priv;
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl;
+	int ret;
+
+	if (!icd) {
+		dev_err(&client->dev, "OV5642: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
+	if (!icl) {
+		dev_err(&client->dev, "OV5642: missing platform data!\n");
+		return -EINVAL;
+	}
+
+	priv = kzalloc(sizeof(struct ov5642), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops);
+
+	icd->ops	= &soc_ov5642_ops;
+	priv->fmt	= &ov5642_colour_fmts[0];
+
+	ret = ov5642_video_probe(icd, client);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	icd->ops = NULL;
+	kfree(priv);
+	return ret;
+}
+
+static int ov5642_remove(struct i2c_client *client)
+{
+	struct ov5642 *priv = to_ov5642(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+	icd->ops = NULL;
+	if (icl->free_bus)
+		icl->free_bus(icl);
+	kfree(priv);
+
+	return 0;
+}
+
+static const struct i2c_device_id ov5642_id[] = {
+	{ "ov5642", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ov5642_id);
+
+static struct i2c_driver ov5642_i2c_driver = {
+	.driver = {
+		.name = "ov5642",
+	},
+	.probe		= ov5642_probe,
+	.remove		= ov5642_remove,
+	.id_table	= ov5642_id,
+};
+
+static int __init ov5642_mod_init(void)
+{
+	return i2c_add_driver(&ov5642_i2c_driver);
+}
+
+static void __exit ov5642_mod_exit(void)
+{
+	i2c_del_driver(&ov5642_i2c_driver);
+}
+
+module_init(ov5642_mod_init);
+module_exit(ov5642_mod_exit);
+
+MODULE_DESCRIPTION("Omnivision OV5642 Camera driver");
+MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
index d4e7c11553c..8aa05853128 100644
--- a/drivers/media/video/ov7670.c
+++ b/drivers/media/video/ov7670.c
@@ -19,8 +19,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-mediabus.h>
-
-#include "ov7670.h"
+#include <media/ov7670.h>
 
 MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
 MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 48895ef863f..397870f076c 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -1032,13 +1032,9 @@ static int ov772x_video_probe(struct soc_camera_device *icd,
 	u8                  pid, ver;
 	const char         *devname;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 5173ac449dd..3681a6ff081 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -657,16 +657,9 @@ static int ov9640_video_probe(struct soc_camera_device *icd,
 	const char	*devname;
 	int		ret = 0;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
-		dev_err(&client->dev, "Parent missing or invalid!\n");
-		ret = -ENODEV;
-		goto err;
-	}
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c
index 4d4ee4faca6..edd1ffcca30 100644
--- a/drivers/media/video/ov9740.c
+++ b/drivers/media/video/ov9740.c
@@ -44,12 +44,12 @@
 #define OV9740_Y_ADDR_START_LO		0x0347
 #define OV9740_X_ADDR_END_HI		0x0348
 #define OV9740_X_ADDR_END_LO		0x0349
-#define OV9740_Y_ADDR_END_HI		0x034A
-#define OV9740_Y_ADDR_END_LO		0x034B
-#define OV9740_X_OUTPUT_SIZE_HI		0x034C
-#define OV9740_X_OUTPUT_SIZE_LO		0x034D
-#define OV9740_Y_OUTPUT_SIZE_HI		0x034E
-#define OV9740_Y_OUTPUT_SIZE_LO		0x034F
+#define OV9740_Y_ADDR_END_HI		0x034a
+#define OV9740_Y_ADDR_END_LO		0x034b
+#define OV9740_X_OUTPUT_SIZE_HI		0x034c
+#define OV9740_X_OUTPUT_SIZE_LO		0x034d
+#define OV9740_Y_OUTPUT_SIZE_HI		0x034e
+#define OV9740_Y_OUTPUT_SIZE_LO		0x034f
 
 /* IO Control Registers */
 #define OV9740_IO_CREL00		0x3002
@@ -68,6 +68,7 @@
 #define OV9740_ANALOG_CTRL04		0x3604
 #define OV9740_ANALOG_CTRL10		0x3610
 #define OV9740_ANALOG_CTRL12		0x3612
+#define OV9740_ANALOG_CTRL15		0x3615
 #define OV9740_ANALOG_CTRL20		0x3620
 #define OV9740_ANALOG_CTRL21		0x3621
 #define OV9740_ANALOG_CTRL22		0x3622
@@ -89,28 +90,28 @@
 #define OV9740_TIMING_CTRL35		0x3835
 
 /* Banding Filter */
-#define OV9740_AEC_MAXEXPO_60_H		0x3A02
-#define OV9740_AEC_MAXEXPO_60_L		0x3A03
-#define OV9740_AEC_B50_STEP_HI		0x3A08
-#define OV9740_AEC_B50_STEP_LO		0x3A09
-#define OV9740_AEC_B60_STEP_HI		0x3A0A
-#define OV9740_AEC_B60_STEP_LO		0x3A0B
-#define OV9740_AEC_CTRL0D		0x3A0D
-#define OV9740_AEC_CTRL0E		0x3A0E
-#define OV9740_AEC_MAXEXPO_50_H		0x3A14
-#define OV9740_AEC_MAXEXPO_50_L		0x3A15
+#define OV9740_AEC_MAXEXPO_60_H		0x3a02
+#define OV9740_AEC_MAXEXPO_60_L		0x3a03
+#define OV9740_AEC_B50_STEP_HI		0x3a08
+#define OV9740_AEC_B50_STEP_LO		0x3a09
+#define OV9740_AEC_B60_STEP_HI		0x3a0a
+#define OV9740_AEC_B60_STEP_LO		0x3a0b
+#define OV9740_AEC_CTRL0D		0x3a0d
+#define OV9740_AEC_CTRL0E		0x3a0e
+#define OV9740_AEC_MAXEXPO_50_H		0x3a14
+#define OV9740_AEC_MAXEXPO_50_L		0x3a15
 
 /* AEC/AGC Control */
 #define OV9740_AEC_ENABLE		0x3503
-#define OV9740_GAIN_CEILING_01		0x3A18
-#define OV9740_GAIN_CEILING_02		0x3A19
-#define OV9740_AEC_HI_THRESHOLD		0x3A11
-#define OV9740_AEC_3A1A			0x3A1A
-#define OV9740_AEC_CTRL1B_WPT2		0x3A1B
-#define OV9740_AEC_CTRL0F_WPT		0x3A0F
-#define OV9740_AEC_CTRL10_BPT		0x3A10
-#define OV9740_AEC_CTRL1E_BPT2		0x3A1E
-#define OV9740_AEC_LO_THRESHOLD		0x3A1F
+#define OV9740_GAIN_CEILING_01		0x3a18
+#define OV9740_GAIN_CEILING_02		0x3a19
+#define OV9740_AEC_HI_THRESHOLD		0x3a11
+#define OV9740_AEC_3A1A			0x3a1a
+#define OV9740_AEC_CTRL1B_WPT2		0x3a1b
+#define OV9740_AEC_CTRL0F_WPT		0x3a0f
+#define OV9740_AEC_CTRL10_BPT		0x3a10
+#define OV9740_AEC_CTRL1E_BPT2		0x3a1e
+#define OV9740_AEC_LO_THRESHOLD		0x3a1f
 
 /* BLC Control */
 #define OV9740_BLC_AUTO_ENABLE		0x4002
@@ -132,7 +133,7 @@
 #define OV9740_VT_SYS_CLK_DIV		0x0303
 #define OV9740_VT_PIX_CLK_DIV		0x0301
 #define OV9740_PLL_CTRL3010		0x3010
-#define OV9740_VFIFO_CTRL00		0x460E
+#define OV9740_VFIFO_CTRL00		0x460e
 
 /* ISP Control */
 #define OV9740_ISP_CTRL00		0x5000
@@ -141,9 +142,9 @@
 #define OV9740_ISP_CTRL05		0x5005
 #define OV9740_ISP_CTRL12		0x5012
 #define OV9740_ISP_CTRL19		0x5019
-#define OV9740_ISP_CTRL1A		0x501A
-#define OV9740_ISP_CTRL1E		0x501E
-#define OV9740_ISP_CTRL1F		0x501F
+#define OV9740_ISP_CTRL1A		0x501a
+#define OV9740_ISP_CTRL1E		0x501e
+#define OV9740_ISP_CTRL1F		0x501f
 #define OV9740_ISP_CTRL20		0x5020
 #define OV9740_ISP_CTRL21		0x5021
 
@@ -158,12 +159,12 @@
 #define OV9740_AWB_ADV_CTRL04		0x5187
 #define OV9740_AWB_ADV_CTRL05		0x5188
 #define OV9740_AWB_ADV_CTRL06		0x5189
-#define OV9740_AWB_ADV_CTRL07		0x518A
-#define OV9740_AWB_ADV_CTRL08		0x518B
-#define OV9740_AWB_ADV_CTRL09		0x518C
-#define OV9740_AWB_ADV_CTRL10		0x518D
-#define OV9740_AWB_ADV_CTRL11		0x518E
-#define OV9740_AWB_CTRL0F		0x518F
+#define OV9740_AWB_ADV_CTRL07		0x518a
+#define OV9740_AWB_ADV_CTRL08		0x518b
+#define OV9740_AWB_ADV_CTRL09		0x518c
+#define OV9740_AWB_ADV_CTRL10		0x518d
+#define OV9740_AWB_ADV_CTRL11		0x518e
+#define OV9740_AWB_CTRL0F		0x518f
 #define OV9740_AWB_CTRL10		0x5190
 #define OV9740_AWB_CTRL11		0x5191
 #define OV9740_AWB_CTRL12		0x5192
@@ -180,27 +181,8 @@
 #define OV9740_MIPI_CTRL_3012		0x3012
 #define OV9740_SC_CMMM_MIPI_CTR		0x3014
 
-/* supported resolutions */
-enum {
-	OV9740_VGA,
-	OV9740_720P,
-};
-
-struct ov9740_resolution {
-	unsigned int width;
-	unsigned int height;
-};
-
-static struct ov9740_resolution ov9740_resolutions[] = {
-	[OV9740_VGA] = {
-		.width	= 640,
-		.height	= 480,
-	},
-	[OV9740_720P] = {
-		.width	= 1280,
-		.height	= 720,
-	},
-};
+#define OV9740_MAX_WIDTH		1280
+#define OV9740_MAX_HEIGHT		720
 
 /* Misc. structures */
 struct ov9740_reg {
@@ -219,9 +201,16 @@ struct ov9740_priv {
 
 	bool				flag_vflip;
 	bool				flag_hflip;
+
+	/* For suspend/resume. */
+	struct v4l2_mbus_framefmt	current_mf;
+	bool				current_enable;
 };
 
 static const struct ov9740_reg ov9740_defaults[] = {
+	/* Software Reset */
+	{ OV9740_SOFTWARE_RESET,	0x01 },
+
 	/* Banding Filter */
 	{ OV9740_AEC_B50_STEP_HI,	0x00 },
 	{ OV9740_AEC_B50_STEP_LO,	0xe8 },
@@ -241,36 +230,36 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	/* Un-documented OV9740 registers */
 	{ 0x5800, 0x29 }, { 0x5801, 0x25 }, { 0x5802, 0x20 }, { 0x5803, 0x21 },
 	{ 0x5804, 0x26 }, { 0x5805, 0x2e }, { 0x5806, 0x11 }, { 0x5807, 0x0c },
-	{ 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580A, 0x0e }, { 0x580B, 0x16 },
-	{ 0x580C, 0x06 }, { 0x580D, 0x02 }, { 0x580E, 0x00 }, { 0x580F, 0x00 },
+	{ 0x5808, 0x09 }, { 0x5809, 0x0a }, { 0x580a, 0x0e }, { 0x580b, 0x16 },
+	{ 0x580c, 0x06 }, { 0x580d, 0x02 }, { 0x580e, 0x00 }, { 0x580f, 0x00 },
 	{ 0x5810, 0x04 }, { 0x5811, 0x0a }, { 0x5812, 0x05 }, { 0x5813, 0x02 },
 	{ 0x5814, 0x00 }, { 0x5815, 0x00 }, { 0x5816, 0x03 }, { 0x5817, 0x09 },
-	{ 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581A, 0x07 }, { 0x581B, 0x08 },
-	{ 0x581C, 0x0b }, { 0x581D, 0x14 }, { 0x581E, 0x28 }, { 0x581F, 0x23 },
+	{ 0x5818, 0x0f }, { 0x5819, 0x0a }, { 0x581a, 0x07 }, { 0x581b, 0x08 },
+	{ 0x581c, 0x0b }, { 0x581d, 0x14 }, { 0x581e, 0x28 }, { 0x581f, 0x23 },
 	{ 0x5820, 0x1d }, { 0x5821, 0x1e }, { 0x5822, 0x24 }, { 0x5823, 0x2a },
 	{ 0x5824, 0x4f }, { 0x5825, 0x6f }, { 0x5826, 0x5f }, { 0x5827, 0x7f },
-	{ 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582A, 0x8f }, { 0x582B, 0x9e },
-	{ 0x582C, 0x8f }, { 0x582D, 0x9f }, { 0x582E, 0x4f }, { 0x582F, 0x87 },
+	{ 0x5828, 0x9f }, { 0x5829, 0x5f }, { 0x582a, 0x8f }, { 0x582b, 0x9e },
+	{ 0x582c, 0x8f }, { 0x582d, 0x9f }, { 0x582e, 0x4f }, { 0x582f, 0x87 },
 	{ 0x5830, 0x86 }, { 0x5831, 0x97 }, { 0x5832, 0xae }, { 0x5833, 0x3f },
 	{ 0x5834, 0x8e }, { 0x5835, 0x7c }, { 0x5836, 0x7e }, { 0x5837, 0xaf },
-	{ 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583A, 0x9f }, { 0x583B, 0x7f },
-	{ 0x583C, 0x5f },
+	{ 0x5838, 0x8f }, { 0x5839, 0x8f }, { 0x583a, 0x9f }, { 0x583b, 0x7f },
+	{ 0x583c, 0x5f },
 
 	/* Y Gamma */
 	{ 0x5480, 0x07 }, { 0x5481, 0x18 }, { 0x5482, 0x2c }, { 0x5483, 0x4e },
 	{ 0x5484, 0x5e }, { 0x5485, 0x6b }, { 0x5486, 0x77 }, { 0x5487, 0x82 },
-	{ 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548A, 0xa4 }, { 0x548B, 0xb1 },
-	{ 0x548C, 0xc6 }, { 0x548D, 0xd8 }, { 0x548E, 0xe9 },
+	{ 0x5488, 0x8c }, { 0x5489, 0x95 }, { 0x548a, 0xa4 }, { 0x548b, 0xb1 },
+	{ 0x548c, 0xc6 }, { 0x548d, 0xd8 }, { 0x548e, 0xe9 },
 
 	/* UV Gamma */
 	{ 0x5490, 0x0f }, { 0x5491, 0xff }, { 0x5492, 0x0d }, { 0x5493, 0x05 },
 	{ 0x5494, 0x07 }, { 0x5495, 0x1a }, { 0x5496, 0x04 }, { 0x5497, 0x01 },
-	{ 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549A, 0x02 }, { 0x549B, 0xeb },
-	{ 0x549C, 0x02 }, { 0x549D, 0xa0 }, { 0x549E, 0x02 }, { 0x549F, 0x67 },
-	{ 0x54A0, 0x02 }, { 0x54A1, 0x3b }, { 0x54A2, 0x02 }, { 0x54A3, 0x18 },
-	{ 0x54A4, 0x01 }, { 0x54A5, 0xe7 }, { 0x54A6, 0x01 }, { 0x54A7, 0xc3 },
-	{ 0x54A8, 0x01 }, { 0x54A9, 0x94 }, { 0x54AA, 0x01 }, { 0x54AB, 0x72 },
-	{ 0x54AC, 0x01 }, { 0x54AD, 0x57 },
+	{ 0x5498, 0x03 }, { 0x5499, 0x53 }, { 0x549a, 0x02 }, { 0x549b, 0xeb },
+	{ 0x549c, 0x02 }, { 0x549d, 0xa0 }, { 0x549e, 0x02 }, { 0x549f, 0x67 },
+	{ 0x54a0, 0x02 }, { 0x54a1, 0x3b }, { 0x54a2, 0x02 }, { 0x54a3, 0x18 },
+	{ 0x54a4, 0x01 }, { 0x54a5, 0xe7 }, { 0x54a6, 0x01 }, { 0x54a7, 0xc3 },
+	{ 0x54a8, 0x01 }, { 0x54a9, 0x94 }, { 0x54aa, 0x01 }, { 0x54ab, 0x72 },
+	{ 0x54ac, 0x01 }, { 0x54ad, 0x57 },
 
 	/* AWB */
 	{ OV9740_AWB_CTRL00,		0xf0 },
@@ -296,18 +285,18 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_AWB_CTRL14,		0x00 },
 
 	/* CIP */
-	{ 0x530D, 0x12 },
+	{ 0x530d, 0x12 },
 
 	/* CMX */
 	{ 0x5380, 0x01 }, { 0x5381, 0x00 }, { 0x5382, 0x00 }, { 0x5383, 0x17 },
 	{ 0x5384, 0x00 }, { 0x5385, 0x01 }, { 0x5386, 0x00 }, { 0x5387, 0x00 },
-	{ 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538A, 0x00 }, { 0x538B, 0x20 },
-	{ 0x538C, 0x00 }, { 0x538D, 0x00 }, { 0x538E, 0x00 }, { 0x538F, 0x16 },
+	{ 0x5388, 0x00 }, { 0x5389, 0xe0 }, { 0x538a, 0x00 }, { 0x538b, 0x20 },
+	{ 0x538c, 0x00 }, { 0x538d, 0x00 }, { 0x538e, 0x00 }, { 0x538f, 0x16 },
 	{ 0x5390, 0x00 }, { 0x5391, 0x9c }, { 0x5392, 0x00 }, { 0x5393, 0xa0 },
 	{ 0x5394, 0x18 },
 
 	/* 50/60 Detection */
-	{ 0x3C0A, 0x9c }, { 0x3C0B, 0x3f },
+	{ 0x3c0a, 0x9c }, { 0x3c0b, 0x3f },
 
 	/* Output Select */
 	{ OV9740_IO_OUTPUT_SEL01,	0x00 },
@@ -333,6 +322,7 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_ANALOG_CTRL10,		0xa1 },
 	{ OV9740_ANALOG_CTRL12,		0x24 },
 	{ OV9740_ANALOG_CTRL22,		0x9f },
+	{ OV9740_ANALOG_CTRL15,		0xf0 },
 
 	/* Sensor Control */
 	{ OV9740_SENSOR_CTRL03,		0x42 },
@@ -385,7 +375,7 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_LN_LENGTH_PCK_LO,	0x62 },
 
 	/* MIPI Control */
-	{ OV9740_MIPI_CTRL00,		0x44 },
+	{ OV9740_MIPI_CTRL00,		0x44 }, /* 0x64 for discontinuous clk */
 	{ OV9740_MIPI_3837,		0x01 },
 	{ OV9740_MIPI_CTRL01,		0x0f },
 	{ OV9740_MIPI_CTRL03,		0x05 },
@@ -393,54 +383,9 @@ static const struct ov9740_reg ov9740_defaults[] = {
 	{ OV9740_VFIFO_RD_CTRL,		0x16 },
 	{ OV9740_MIPI_CTRL_3012,	0x70 },
 	{ OV9740_SC_CMMM_MIPI_CTR,	0x01 },
-};
-
-static const struct ov9740_reg ov9740_regs_vga[] = {
-	{ OV9740_X_ADDR_START_HI,	0x00 },
-	{ OV9740_X_ADDR_START_LO,	0xa0 },
-	{ OV9740_Y_ADDR_START_HI,	0x00 },
-	{ OV9740_Y_ADDR_START_LO,	0x00 },
-	{ OV9740_X_ADDR_END_HI,		0x04 },
-	{ OV9740_X_ADDR_END_LO,		0x63 },
-	{ OV9740_Y_ADDR_END_HI,		0x02 },
-	{ OV9740_Y_ADDR_END_LO,		0xd3 },
-	{ OV9740_X_OUTPUT_SIZE_HI,	0x02 },
-	{ OV9740_X_OUTPUT_SIZE_LO,	0x80 },
-	{ OV9740_Y_OUTPUT_SIZE_HI,	0x01 },
-	{ OV9740_Y_OUTPUT_SIZE_LO,	0xe0 },
-	{ OV9740_ISP_CTRL1E,		0x03 },
-	{ OV9740_ISP_CTRL1F,		0xc0 },
-	{ OV9740_ISP_CTRL20,		0x02 },
-	{ OV9740_ISP_CTRL21,		0xd0 },
-	{ OV9740_VFIFO_READ_START_HI,	0x01 },
-	{ OV9740_VFIFO_READ_START_LO,	0x40 },
-	{ OV9740_ISP_CTRL00,		0xff },
-	{ OV9740_ISP_CTRL01,		0xff },
-	{ OV9740_ISP_CTRL03,		0xff },
-};
 
-static const struct ov9740_reg ov9740_regs_720p[] = {
-	{ OV9740_X_ADDR_START_HI,	0x00 },
-	{ OV9740_X_ADDR_START_LO,	0x00 },
-	{ OV9740_Y_ADDR_START_HI,	0x00 },
-	{ OV9740_Y_ADDR_START_LO,	0x00 },
-	{ OV9740_X_ADDR_END_HI,		0x05 },
-	{ OV9740_X_ADDR_END_LO,		0x03 },
-	{ OV9740_Y_ADDR_END_HI,		0x02 },
-	{ OV9740_Y_ADDR_END_LO,		0xd3 },
-	{ OV9740_X_OUTPUT_SIZE_HI,	0x05 },
-	{ OV9740_X_OUTPUT_SIZE_LO,	0x00 },
-	{ OV9740_Y_OUTPUT_SIZE_HI,	0x02 },
-	{ OV9740_Y_OUTPUT_SIZE_LO,	0xd0 },
-	{ OV9740_ISP_CTRL1E,		0x05 },
-	{ OV9740_ISP_CTRL1F,		0x00 },
-	{ OV9740_ISP_CTRL20,		0x02 },
-	{ OV9740_ISP_CTRL21,		0xd0 },
-	{ OV9740_VFIFO_READ_START_HI,	0x02 },
-	{ OV9740_VFIFO_READ_START_LO,	0x30 },
-	{ OV9740_ISP_CTRL00,		0xff },
-	{ OV9740_ISP_CTRL01,		0xef },
-	{ OV9740_ISP_CTRL03,		0xff },
+	/* YUYV order */
+	{ OV9740_ISP_CTRL19,		0x02 },
 };
 
 static enum v4l2_mbus_pixelcode ov9740_codes[] = {
@@ -537,7 +482,8 @@ static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset)
 	ret = ov9740_reg_read(client, reg, &val);
 	if (ret < 0) {
 		dev_err(&client->dev,
-			"[Read]-Modify-Write of register %02x failed!\n", reg);
+			"[Read]-Modify-Write of register 0x%04x failed!\n",
+			reg);
 		return ret;
 	}
 
@@ -547,7 +493,8 @@ static int ov9740_reg_rmw(struct i2c_client *client, u16 reg, u8 set, u8 unset)
 	ret = ov9740_reg_write(client, reg, val);
 	if (ret < 0) {
 		dev_err(&client->dev,
-			"Read-Modify-[Write] of register %02x failed!\n", reg);
+			"Read-Modify-[Write] of register 0x%04x failed!\n",
+			reg);
 		return ret;
 	}
 
@@ -608,6 +555,8 @@ static int ov9740_s_stream(struct v4l2_subdev *sd, int enable)
 					       0x00);
 	}
 
+	priv->current_enable = enable;
+
 	return ret;
 }
 
@@ -630,126 +579,127 @@ static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-/* Get status of additional camera capabilities */
-static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9740_priv *priv = to_ov9740(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* Set status of additional camera capabilities */
-static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9740_priv *priv = to_ov9740(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		priv->flag_vflip = ctrl->value;
-		break;
-	case V4L2_CID_HFLIP:
-		priv->flag_hflip = ctrl->value;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* Get chip identification */
-static int ov9740_g_chip_ident(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_chip_ident *id)
+/* select nearest higher resolution for capture */
+static void ov9740_res_roundup(u32 *width, u32 *height)
 {
-	struct ov9740_priv *priv = to_ov9740(sd);
+	/* Width must be a multiple of 4 pixels. */
+	*width = ALIGN(*width, 4);
 
-	id->ident = priv->ident;
-	id->revision = priv->revision;
+	/* Max resolution is 1280x720 (720p). */
+	if (*width > OV9740_MAX_WIDTH)
+		*width = OV9740_MAX_WIDTH;
 
-	return 0;
+	if (*height > OV9740_MAX_HEIGHT)
+		*height = OV9740_MAX_HEIGHT;
 }
 
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ov9740_get_register(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_register *reg)
+/* Setup registers according to resolution and color encoding */
+static int ov9740_set_res(struct i2c_client *client, u32 width, u32 height)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u32 x_start;
+	u32 y_start;
+	u32 x_end;
+	u32 y_end;
+	bool scaling = 0;
+	u32 scale_input_x;
+	u32 scale_input_y;
 	int ret;
-	u8 val;
-
-	if (reg->reg & ~0xffff)
-		return -EINVAL;
 
-	reg->size = 2;
-
-	ret = ov9740_reg_read(client, reg->reg, &val);
-	if (ret)
-		return ret;
-
-	reg->val = (__u64)val;
+	if ((width != OV9740_MAX_WIDTH) || (height != OV9740_MAX_HEIGHT))
+		scaling = 1;
 
-	return ret;
-}
-
-static int ov9740_set_register(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	/*
+	 * Try to use as much of the sensor area as possible when supporting
+	 * smaller resolutions.  Depending on the aspect ratio of the
+	 * chosen resolution, we can either use the full width of the sensor,
+	 * or the full height of the sensor (or both if the aspect ratio is
+	 * the same as 1280x720.
+	 */
+	if ((OV9740_MAX_WIDTH * height) > (OV9740_MAX_HEIGHT * width)) {
+		scale_input_x = (OV9740_MAX_HEIGHT * width) / height;
+		scale_input_y = OV9740_MAX_HEIGHT;
+	} else {
+		scale_input_x = OV9740_MAX_WIDTH;
+		scale_input_y = (OV9740_MAX_WIDTH * height) / width;
+	}
 
-	if (reg->reg & ~0xffff || reg->val & ~0xff)
-		return -EINVAL;
+	/* These describe the area of the sensor to use. */
+	x_start = (OV9740_MAX_WIDTH - scale_input_x) / 2;
+	y_start = (OV9740_MAX_HEIGHT - scale_input_y) / 2;
+	x_end = x_start + scale_input_x - 1;
+	y_end = y_start + scale_input_y - 1;
 
-	return ov9740_reg_write(client, reg->reg, reg->val);
-}
-#endif
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_START_HI, x_start >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_START_LO, x_start & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_HI, y_start >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_START_LO, y_start & 0xff);
+	if (ret)
+		goto done;
 
-/* select nearest higher resolution for capture */
-static void ov9740_res_roundup(u32 *width, u32 *height)
-{
-	int i;
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_END_HI, x_end >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_X_ADDR_END_LO, x_end & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_HI, y_end >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_ADDR_END_LO, y_end & 0xff);
+	if (ret)
+		goto done;
 
-	for (i = 0; i < ARRAY_SIZE(ov9740_resolutions); i++)
-		if ((ov9740_resolutions[i].width >= *width) &&
-		    (ov9740_resolutions[i].height >= *height)) {
-			*width = ov9740_resolutions[i].width;
-			*height = ov9740_resolutions[i].height;
-			return;
-		}
+	ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_HI, width >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_X_OUTPUT_SIZE_LO, width & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_HI, height >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_Y_OUTPUT_SIZE_LO, height & 0xff);
+	if (ret)
+		goto done;
 
-	*width = ov9740_resolutions[OV9740_720P].width;
-	*height = ov9740_resolutions[OV9740_720P].height;
-}
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL1E, scale_input_x >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL1F, scale_input_x & 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL20, scale_input_y >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL21, scale_input_y & 0xff);
+	if (ret)
+		goto done;
 
-/* Setup registers according to resolution and color encoding */
-static int ov9740_set_res(struct i2c_client *client, u32 width)
-{
-	int ret;
+	ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_HI,
+			       (scale_input_x - width) >> 8);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_VFIFO_READ_START_LO,
+			       (scale_input_x - width) & 0xff);
+	if (ret)
+		goto done;
 
-	/* select register configuration for given resolution */
-	if (width == ov9740_resolutions[OV9740_VGA].width) {
-		dev_dbg(&client->dev, "Setting image size to 640x480\n");
-		ret = ov9740_reg_write_array(client, ov9740_regs_vga,
-					     ARRAY_SIZE(ov9740_regs_vga));
-	} else if (width == ov9740_resolutions[OV9740_720P].width) {
-		dev_dbg(&client->dev, "Setting image size to 1280x720\n");
-		ret = ov9740_reg_write_array(client, ov9740_regs_720p,
-					     ARRAY_SIZE(ov9740_regs_720p));
-	} else {
-		dev_err(&client->dev, "Failed to select resolution!\n");
-		return -EINVAL;
-	}
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL00, 0xff);
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL01, 0xef |
+							  (scaling << 4));
+	if (ret)
+		goto done;
+	ret = ov9740_reg_write(client, OV9740_ISP_CTRL03, 0xff);
 
+done:
 	return ret;
 }
 
@@ -758,6 +708,7 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov9740_priv *priv = to_ov9740(sd);
 	enum v4l2_colorspace cspace;
 	enum v4l2_mbus_pixelcode code = mf->code;
 	int ret;
@@ -777,13 +728,15 @@ static int ov9740_s_fmt(struct v4l2_subdev *sd,
 	if (ret < 0)
 		return ret;
 
-	ret = ov9740_set_res(client, mf->width);
+	ret = ov9740_set_res(client, mf->width, mf->height);
 	if (ret < 0)
 		return ret;
 
 	mf->code	= code;
 	mf->colorspace	= cspace;
 
+	memcpy(&priv->current_mf, mf, sizeof(struct v4l2_mbus_framefmt));
+
 	return ret;
 }
 
@@ -814,8 +767,8 @@ static int ov9740_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 {
 	a->bounds.left		= 0;
 	a->bounds.top		= 0;
-	a->bounds.width		= ov9740_resolutions[OV9740_720P].width;
-	a->bounds.height	= ov9740_resolutions[OV9740_720P].height;
+	a->bounds.width		= OV9740_MAX_WIDTH;
+	a->bounds.height	= OV9740_MAX_HEIGHT;
 	a->defrect		= a->bounds;
 	a->type			= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	a->pixelaspect.numerator	= 1;
@@ -828,13 +781,115 @@ static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	a->c.left		= 0;
 	a->c.top		= 0;
-	a->c.width		= ov9740_resolutions[OV9740_720P].width;
-	a->c.height		= ov9740_resolutions[OV9740_720P].height;
+	a->c.width		= OV9740_MAX_WIDTH;
+	a->c.height		= OV9740_MAX_HEIGHT;
 	a->type			= V4L2_BUF_TYPE_VIDEO_CAPTURE;
 
 	return 0;
 }
 
+/* Get status of additional camera capabilities */
+static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		ctrl->value = priv->flag_vflip;
+		break;
+	case V4L2_CID_HFLIP:
+		ctrl->value = priv->flag_hflip;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Set status of additional camera capabilities */
+static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		priv->flag_vflip = ctrl->value;
+		break;
+	case V4L2_CID_HFLIP:
+		priv->flag_hflip = ctrl->value;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Get chip identification */
+static int ov9740_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	id->ident = priv->ident;
+	id->revision = priv->revision;
+
+	return 0;
+}
+
+static int ov9740_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct ov9740_priv *priv = to_ov9740(sd);
+
+	if (!priv->current_enable)
+		return 0;
+
+	if (on) {
+		ov9740_s_fmt(sd, &priv->current_mf);
+		ov9740_s_stream(sd, priv->current_enable);
+	} else {
+		ov9740_s_stream(sd, 0);
+		priv->current_enable = true;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov9740_get_register(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+	u8 val;
+
+	if (reg->reg & ~0xffff)
+		return -EINVAL;
+
+	reg->size = 2;
+
+	ret = ov9740_reg_read(client, reg->reg, &val);
+	if (ret)
+		return ret;
+
+	reg->val = (__u64)val;
+
+	return ret;
+}
+
+static int ov9740_set_register(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg & ~0xffff || reg->val & ~0xff)
+		return -EINVAL;
+
+	return ov9740_reg_write(client, reg->reg, reg->val);
+}
+#endif
+
 static int ov9740_video_probe(struct soc_camera_device *icd,
 			      struct i2c_client *client)
 {
@@ -843,16 +898,9 @@ static int ov9740_video_probe(struct soc_camera_device *icd,
 	u8 modelhi, modello;
 	int ret;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
-		dev_err(&client->dev, "Parent missing or invalid!\n");
-		ret = -ENODEV;
-		goto err;
-	}
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * check and show product ID and manufacturer ID
@@ -901,24 +949,24 @@ static struct soc_camera_ops ov9740_ops = {
 	.num_controls		= ARRAY_SIZE(ov9740_controls),
 };
 
+static struct v4l2_subdev_video_ops ov9740_video_ops = {
+	.s_stream		= ov9740_s_stream,
+	.s_mbus_fmt		= ov9740_s_fmt,
+	.try_mbus_fmt		= ov9740_try_fmt,
+	.enum_mbus_fmt		= ov9740_enum_fmt,
+	.cropcap		= ov9740_cropcap,
+	.g_crop			= ov9740_g_crop,
+};
+
 static struct v4l2_subdev_core_ops ov9740_core_ops = {
 	.g_ctrl			= ov9740_g_ctrl,
 	.s_ctrl			= ov9740_s_ctrl,
 	.g_chip_ident		= ov9740_g_chip_ident,
+	.s_power		= ov9740_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register		= ov9740_get_register,
 	.s_register		= ov9740_set_register,
 #endif
-
-};
-
-static struct v4l2_subdev_video_ops ov9740_video_ops = {
-	.s_stream		= ov9740_s_stream,
-	.s_mbus_fmt		= ov9740_s_fmt,
-	.try_mbus_fmt		= ov9740_try_fmt,
-	.enum_mbus_fmt		= ov9740_enum_fmt,
-	.cropcap		= ov9740_cropcap,
-	.g_crop			= ov9740_g_crop,
 };
 
 static struct v4l2_subdev_ops ov9740_subdev_ops = {
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 7551907f8c2..e753b5e4d2c 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -28,7 +28,6 @@
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <asm/io.h>
@@ -39,7 +38,7 @@
 #include <media/v4l2-device.h>
 
 MODULE_LICENSE("GPL");
-
+MODULE_VERSION("0.0.4");
 
 #define MOTOROLA	1
 #define PHILIPS2	2               /* SAA7191 */
@@ -678,7 +677,6 @@ static int pms_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, dev->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, "Mediavision PMS", sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "ISA", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 0, 3);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
index 2254194aad5..c1d9bb61cd7 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-main.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -168,6 +168,7 @@ module_exit(pvr_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.9.1");
 
 
 /*
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 38761142a4d..e27f8ab7696 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -91,7 +91,7 @@ static struct v4l2_capability pvr_capability ={
 	.driver         = "pvrusb2",
 	.card           = "Hauppauge WinTV pvr-usb2",
 	.bus_info       = "usb",
-	.version        = KERNEL_VERSION(0, 9, 0),
+	.version        = LINUX_VERSION_CODE,
 	.capabilities   = (V4L2_CAP_VIDEO_CAPTURE |
 			   V4L2_CAP_TUNER | V4L2_CAP_AUDIO | V4L2_CAP_RADIO |
 			   V4L2_CAP_READWRITE),
@@ -369,11 +369,6 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		break;
 	}
 
-	case VIDIOC_S_AUDIO:
-	{
-		ret = -EINVAL;
-		break;
-	}
 	case VIDIOC_G_TUNER:
 	{
 		struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
@@ -850,7 +845,7 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 #endif
 
 	default :
-		ret = -EINVAL;
+		ret = -ENOTTY;
 		break;
 	}
 
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8da42e4f1ba..d63d0a85003 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,7 @@
 config USB_PWC
 	tristate "USB Philips Cameras"
 	depends on VIDEO_V4L2
+	select VIDEOBUF2_VMALLOC
 	---help---
 	  Say Y or M here if you want to use one of these Philips & OEM
 	  webcams:
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 760b4de13ad..3977addf3ba 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -3,6 +3,7 @@
    video modes.
    (C) 1999-2003 Nemosoft Unv.
    (C) 2004-2006 Luc Saillard (luc@saillard.org)
+   (C) 2011 Hans de Goede <hdegoede@redhat.com>
 
    NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
    driver and thus may have bugs that are not present in the original version.
@@ -43,61 +44,12 @@
 #include <asm/errno.h>
 
 #include "pwc.h"
-#include "pwc-uncompress.h"
 #include "pwc-kiara.h"
 #include "pwc-timon.h"
 #include "pwc-dec1.h"
 #include "pwc-dec23.h"
 
-/* Request types: video */
-#define SET_LUM_CTL			0x01
-#define GET_LUM_CTL			0x02
-#define SET_CHROM_CTL			0x03
-#define GET_CHROM_CTL			0x04
-#define SET_STATUS_CTL			0x05
-#define GET_STATUS_CTL			0x06
-#define SET_EP_STREAM_CTL		0x07
-#define GET_EP_STREAM_CTL		0x08
-#define GET_XX_CTL			0x09
-#define SET_XX_CTL			0x0A
-#define GET_XY_CTL			0x0B
-#define SET_XY_CTL			0x0C
-#define SET_MPT_CTL			0x0D
-#define GET_MPT_CTL			0x0E
-
-/* Selectors for the Luminance controls [GS]ET_LUM_CTL */
-#define AGC_MODE_FORMATTER			0x2000
-#define PRESET_AGC_FORMATTER			0x2100
-#define SHUTTER_MODE_FORMATTER			0x2200
-#define PRESET_SHUTTER_FORMATTER		0x2300
-#define PRESET_CONTOUR_FORMATTER		0x2400
-#define AUTO_CONTOUR_FORMATTER			0x2500
-#define BACK_LIGHT_COMPENSATION_FORMATTER	0x2600
-#define CONTRAST_FORMATTER			0x2700
-#define DYNAMIC_NOISE_CONTROL_FORMATTER		0x2800
-#define FLICKERLESS_MODE_FORMATTER		0x2900
-#define AE_CONTROL_SPEED			0x2A00
-#define BRIGHTNESS_FORMATTER			0x2B00
-#define GAMMA_FORMATTER				0x2C00
-
-/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */
-#define WB_MODE_FORMATTER			0x1000
-#define AWB_CONTROL_SPEED_FORMATTER		0x1100
-#define AWB_CONTROL_DELAY_FORMATTER		0x1200
-#define PRESET_MANUAL_RED_GAIN_FORMATTER	0x1300
-#define PRESET_MANUAL_BLUE_GAIN_FORMATTER	0x1400
-#define COLOUR_MODE_FORMATTER			0x1500
-#define SATURATION_MODE_FORMATTER1		0x1600
-#define SATURATION_MODE_FORMATTER2		0x1700
-
-/* Selectors for the Status controls [GS]ET_STATUS_CTL */
-#define SAVE_USER_DEFAULTS_FORMATTER		0x0200
-#define RESTORE_USER_DEFAULTS_FORMATTER		0x0300
-#define RESTORE_FACTORY_DEFAULTS_FORMATTER	0x0400
-#define READ_AGC_FORMATTER			0x0500
-#define READ_SHUTTER_FORMATTER			0x0600
-#define READ_RED_GAIN_FORMATTER			0x0700
-#define READ_BLUE_GAIN_FORMATTER		0x0800
+/* Selectors for status controls used only in this file */
 #define GET_STATUS_B00				0x0B00
 #define SENSOR_TYPE_FORMATTER1			0x0C00
 #define GET_STATUS_3000				0x3000
@@ -116,11 +68,6 @@
 /* Formatters for the Video Endpoint controls [GS]ET_EP_STREAM_CTL */
 #define VIDEO_OUTPUT_CONTROL_FORMATTER		0x0100
 
-/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */
-#define PT_RELATIVE_CONTROL_FORMATTER		0x01
-#define PT_RESET_CONTROL_FORMATTER		0x02
-#define PT_STATUS_FORMATTER			0x03
-
 static const char *size2name[PSZ_MAX] =
 {
 	"subQCIF",
@@ -160,7 +107,7 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev);
 /****************************************************************************/
 
 static int _send_control_msg(struct pwc_device *pdev,
-	u8 request, u16 value, int index, void *buf, int buflen, int timeout)
+	u8 request, u16 value, int index, void *buf, int buflen)
 {
 	int rc;
 	void *kbuf = NULL;
@@ -177,7 +124,7 @@ static int _send_control_msg(struct pwc_device *pdev,
 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		value,
 		index,
-		kbuf, buflen, timeout);
+		kbuf, buflen, USB_CTRL_SET_TIMEOUT);
 
 	kfree(kbuf);
 	return rc;
@@ -197,9 +144,13 @@ static int recv_control_msg(struct pwc_device *pdev,
 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		value,
 		pdev->vcinterface,
-		kbuf, buflen, 500);
+		kbuf, buflen, USB_CTRL_GET_TIMEOUT);
 	memcpy(buf, kbuf, buflen);
 	kfree(kbuf);
+
+	if (rc < 0)
+		PWC_ERROR("recv_control_msg error %d req %02x val %04x\n",
+			  rc, request, value);
 	return rc;
 }
 
@@ -210,18 +161,16 @@ static inline int send_video_command(struct pwc_device *pdev,
 		SET_EP_STREAM_CTL,
 		VIDEO_OUTPUT_CONTROL_FORMATTER,
 		index,
-		buf, buflen, 1000);
+		buf, buflen);
 }
 
-static inline int send_control_msg(struct pwc_device *pdev,
+int send_control_msg(struct pwc_device *pdev,
 	u8 request, u16 value, void *buf, int buflen)
 {
 	return _send_control_msg(pdev,
-		request, value, pdev->vcinterface, buf, buflen, 500);
+		request, value, pdev->vcinterface, buf, buflen);
 }
 
-
-
 static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
 {
 	unsigned char buf[3];
@@ -261,8 +210,11 @@ static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
 		PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
 		return ret;
 	}
-	if (pEntry->compressed && pdev->pixfmt == V4L2_PIX_FMT_YUV420)
-		pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data);
+	if (pEntry->compressed && pdev->pixfmt == V4L2_PIX_FMT_YUV420) {
+		ret = pwc_dec1_init(pdev, pdev->type, pdev->release, buf);
+		if (ret < 0)
+			return ret;
+	}
 
 	pdev->cmd_len = 3;
 	memcpy(pdev->cmd_buf, buf, 3);
@@ -321,8 +273,11 @@ static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, i
 	if (ret < 0)
 		return ret;
 
-	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420)
-		pwc_dec23_init(pdev, pdev->type, buf);
+	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) {
+		ret = pwc_dec23_init(pdev, pdev->type, buf);
+		if (ret < 0)
+			return ret;
+	}
 
 	pdev->cmd_len = 13;
 	memcpy(pdev->cmd_buf, buf, 13);
@@ -394,8 +349,11 @@ static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, i
 	if (ret < 0)
 		return ret;
 
-	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420)
-		pwc_dec23_init(pdev, pdev->type, buf);
+	if (pChoose->bandlength > 0 && pdev->pixfmt == V4L2_PIX_FMT_YUV420) {
+		ret = pwc_dec23_init(pdev, pdev->type, buf);
+		if (ret < 0)
+			return ret;
+	}
 
 	pdev->cmd_len = 12;
 	memcpy(pdev->cmd_buf, buf, 12);
@@ -452,6 +410,7 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
 	}
 	pdev->view.x = width;
 	pdev->view.y = height;
+	pdev->vcompression = compression;
 	pdev->frame_total_size = pdev->frame_size + pdev->frame_header_size + pdev->frame_trailer_size;
 	pwc_set_image_buffer_size(pdev);
 	PWC_DEBUG_SIZE("Set viewport to %dx%d, image size is %dx%d.\n", width, height, pwc_image_sizes[size].x, pwc_image_sizes[size].y);
@@ -511,13 +470,9 @@ unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned i
 	return ret;
 }
 
-#define BLACK_Y 0
-#define BLACK_U 128
-#define BLACK_V 128
-
 static void pwc_set_image_buffer_size(struct pwc_device *pdev)
 {
-	int i, factor = 0;
+	int factor = 0;
 
 	/* for V4L2_PIX_FMT_YUV420 */
 	switch (pdev->pixfmt) {
@@ -541,442 +496,108 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev)
 	 */
 	pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
 	pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
-
-	/* Fill buffers with black colors */
-	for (i = 0; i < pwc_mbufs; i++) {
-		unsigned char *p = pdev->image_data + pdev->images[i].offset;
-		memset(p, BLACK_Y, pdev->view.x * pdev->view.y);
-		p += pdev->view.x * pdev->view.y;
-		memset(p, BLACK_U, pdev->view.x * pdev->view.y/4);
-		p += pdev->view.x * pdev->view.y/4;
-		memset(p, BLACK_V, pdev->view.x * pdev->view.y/4);
-	}
 }
 
-
-
-/* BRIGHTNESS */
-
-int pwc_get_brightness(struct pwc_device *pdev)
+int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data)
 {
-	char buf;
 	int ret;
+	u8 buf;
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
+	ret = recv_control_msg(pdev, request, value, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
-	return buf;
-}
 
-int pwc_set_brightness(struct pwc_device *pdev, int value)
-{
-	char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	buf = (value >> 9) & 0x7f;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
+	*data = buf;
+	return 0;
 }
 
-/* CONTRAST */
-
-int pwc_get_contrast(struct pwc_device *pdev)
+int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data)
 {
-	char buf;
 	int ret;
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
+	ret = send_control_msg(pdev, request, value, &data, sizeof(data));
 	if (ret < 0)
 		return ret;
-	return buf;
-}
 
-int pwc_set_contrast(struct pwc_device *pdev, int value)
-{
-	char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	buf = (value >> 10) & 0x3f;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
+	return 0;
 }
 
-/* GAMMA */
-
-int pwc_get_gamma(struct pwc_device *pdev)
+int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data)
 {
-	char buf;
 	int ret;
+	s8 buf;
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
+	ret = recv_control_msg(pdev, request, value, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
-	return buf;
-}
-
-int pwc_set_gamma(struct pwc_device *pdev, int value)
-{
-	char buf;
 
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	buf = (value >> 11) & 0x1f;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
-}
-
-
-/* SATURATION */
-
-/* return a value between [-100 , 100] */
-int pwc_get_saturation(struct pwc_device *pdev, int *value)
-{
-	char buf;
-	int ret, saturation_register;
-
-	if (pdev->type < 675)
-		return -EINVAL;
-	if (pdev->type < 730)
-		saturation_register = SATURATION_MODE_FORMATTER2;
-	else
-		saturation_register = SATURATION_MODE_FORMATTER1;
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*value = (signed)buf;
+	*data = buf;
 	return 0;
 }
 
-/* @param value saturation color between [-100 , 100] */
-int pwc_set_saturation(struct pwc_device *pdev, int value)
+int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data)
 {
-	char buf;
-	int saturation_register;
-
-	if (pdev->type < 675)
-		return -EINVAL;
-	if (value < -100)
-		value = -100;
-	if (value > 100)
-		value = 100;
-	if (pdev->type < 730)
-		saturation_register = SATURATION_MODE_FORMATTER2;
-	else
-		saturation_register = SATURATION_MODE_FORMATTER1;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
-}
-
-/* AGC */
-
-int pwc_set_agc(struct pwc_device *pdev, int mode, int value)
-{
-	char buf;
 	int ret;
+	u8 buf[2];
 
-	if (mode)
-		buf = 0x0; /* auto */
-	else
-		buf = 0xff; /* fixed */
-
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
-
-	if (!mode && ret >= 0) {
-		if (value < 0)
-			value = 0;
-		if (value > 0xffff)
-			value = 0xffff;
-		buf = (value >> 10) & 0x3F;
-		ret = send_control_msg(pdev,
-			SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
-	}
+	ret = recv_control_msg(pdev, request, value, buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
+
+	*data = (buf[1] << 8) | buf[0];
 	return 0;
 }
 
-int pwc_get_agc(struct pwc_device *pdev, int *value)
+int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data)
 {
-	unsigned char buf;
 	int ret;
+	u8 buf[2];
 
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
+	buf[0] = data & 0xff;
+	buf[1] = data >> 8;
+	ret = send_control_msg(pdev, request, value, buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
-	if (buf != 0) { /* fixed */
-		ret = recv_control_msg(pdev,
-			GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-		if (buf > 0x3F)
-			buf = 0x3F;
-		*value = (buf << 10);
-	}
-	else { /* auto */
-		ret = recv_control_msg(pdev,
-			GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-		/* Gah... this value ranges from 0x00 ... 0x9F */
-		if (buf > 0x9F)
-			buf = 0x9F;
-		*value = -(48 + buf * 409);
-	}
-
 	return 0;
 }
 
-int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value)
-{
-	char buf[2];
-	int speed, ret;
-
-
-	if (mode)
-		buf[0] = 0x0;	/* auto */
-	else
-		buf[0] = 0xff; /* fixed */
-
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, 1);
-
-	if (!mode && ret >= 0) {
-		if (value < 0)
-			value = 0;
-		if (value > 0xffff)
-			value = 0xffff;
-
-		if (DEVICE_USE_CODEC2(pdev->type)) {
-			/* speed ranges from 0x0 to 0x290 (656) */
-			speed = (value / 100);
-			buf[1] = speed >> 8;
-			buf[0] = speed & 0xff;
-		} else if (DEVICE_USE_CODEC3(pdev->type)) {
-			/* speed seems to range from 0x0 to 0xff */
-			buf[1] = 0;
-			buf[0] = value >> 8;
-		}
-
-		ret = send_control_msg(pdev,
-			SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
-			&buf, sizeof(buf));
-	}
-	return ret;
-}
-
-/* This function is not exported to v4l1, so output values between 0 -> 256 */
-int pwc_get_shutter_speed(struct pwc_device *pdev, int *value)
+int pwc_button_ctrl(struct pwc_device *pdev, u16 value)
 {
-	unsigned char buf[2];
 	int ret;
 
-	ret = recv_control_msg(pdev,
-		GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
+	ret = send_control_msg(pdev, SET_STATUS_CTL, value, NULL, 0);
 	if (ret < 0)
 		return ret;
-	*value = buf[0] + (buf[1] << 8);
-	if (DEVICE_USE_CODEC2(pdev->type)) {
-		/* speed ranges from 0x0 to 0x290 (656) */
-		*value *= 256/656;
-	} else if (DEVICE_USE_CODEC3(pdev->type)) {
-		/* speed seems to range from 0x0 to 0xff */
-	}
+
 	return 0;
 }
 
-
 /* POWER */
-
-int pwc_camera_power(struct pwc_device *pdev, int power)
+void pwc_camera_power(struct pwc_device *pdev, int power)
 {
 	char buf;
+	int r;
+
+	if (!pdev->power_save)
+		return;
 
 	if (pdev->type < 675 || (pdev->type < 730 && pdev->release < 6))
-		return 0;	/* Not supported by Nala or Timon < release 6 */
+		return;	/* Not supported by Nala or Timon < release 6 */
 
 	if (power)
 		buf = 0x00; /* active */
 	else
 		buf = 0xFF; /* power save */
-	return send_control_msg(pdev,
+	r = send_control_msg(pdev,
 		SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
 		&buf, sizeof(buf));
-}
-
-
-
-/* private calls */
-
-int pwc_restore_user(struct pwc_device *pdev)
-{
-	return send_control_msg(pdev,
-		SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
-}
-
-int pwc_save_user(struct pwc_device *pdev)
-{
-	return send_control_msg(pdev,
-		SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
-}
-
-int pwc_restore_factory(struct pwc_device *pdev)
-{
-	return send_control_msg(pdev,
-		SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
-}
-
- /* ************************************************* */
- /* Patch by Alvarado: (not in the original version   */
-
- /*
-  * the camera recognizes modes from 0 to 4:
-  *
-  * 00: indoor (incandescant lighting)
-  * 01: outdoor (sunlight)
-  * 02: fluorescent lighting
-  * 03: manual
-  * 04: auto
-  */
-int pwc_set_awb(struct pwc_device *pdev, int mode)
-{
-	char buf;
-	int ret;
-
-	if (mode < 0)
-	    mode = 0;
-
-	if (mode > 4)
-	    mode = 4;
-
-	buf = mode & 0x07; /* just the lowest three bits */
-
-	ret = send_control_msg(pdev,
-		SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
-
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-int pwc_get_awb(struct pwc_device *pdev)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
-
-	if (ret < 0)
-		return ret;
-	return buf;
-}
-
-int pwc_set_red_gain(struct pwc_device *pdev, int value)
-{
-	unsigned char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	/* only the msb is considered */
-	buf = value >> 8;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_red_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-	    return ret;
-	*value = buf << 8;
-	return 0;
-}
-
-
-int pwc_set_blue_gain(struct pwc_device *pdev, int value)
-{
-	unsigned char buf;
-
-	if (value < 0)
-		value = 0;
-	if (value > 0xffff)
-		value = 0xffff;
-	/* only the msb is considered */
-	buf = value >> 8;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-	    return ret;
-	*value = buf << 8;
-	return 0;
-}
-
 
-/* The following two functions are different, since they only read the
-   internal red/blue gains, which may be different from the manual
-   gains set or read above.
- */
-static int pwc_read_red_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*value = buf << 8;
-	return 0;
+	if (r < 0)
+		PWC_ERROR("Failed to power %s camera (%d)\n",
+			  power ? "on" : "off", r);
 }
 
-static int pwc_read_blue_gain(struct pwc_device *pdev, int *value)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*value = buf << 8;
-	return 0;
-}
-
-
 static int pwc_set_wb_speed(struct pwc_device *pdev, int speed)
 {
 	unsigned char buf;
@@ -1028,6 +649,7 @@ static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
 int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 {
 	unsigned char buf[2];
+	int r;
 
 	if (pdev->type < 730)
 		return 0;
@@ -1045,8 +667,12 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value)
 	buf[0] = on_value;
 	buf[1] = off_value;
 
-	return send_control_msg(pdev,
+	r = send_control_msg(pdev,
 		SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
+	if (r < 0)
+		PWC_ERROR("Failed to set LED on/off time (%d)\n", r);
+
+	return r;
 }
 
 static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
@@ -1069,164 +695,6 @@ static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
 	return 0;
 }
 
-int pwc_set_contour(struct pwc_device *pdev, int contour)
-{
-	unsigned char buf;
-	int ret;
-
-	if (contour < 0)
-		buf = 0xff; /* auto contour on */
-	else
-		buf = 0x0; /* auto contour off */
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	if (contour < 0)
-		return 0;
-	if (contour > 0xffff)
-		contour = 0xffff;
-
-	buf = (contour >> 10); /* contour preset is [0..3f] */
-	ret = send_control_msg(pdev,
-		SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-int pwc_get_contour(struct pwc_device *pdev, int *contour)
-{
-	unsigned char buf;
-	int ret;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-
-	if (buf == 0) {
-		/* auto mode off, query current preset value */
-		ret = recv_control_msg(pdev,
-			GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
-			&buf, sizeof(buf));
-		if (ret < 0)
-			return ret;
-		*contour = buf << 10;
-	}
-	else
-		*contour = -1;
-	return 0;
-}
-
-
-int pwc_set_backlight(struct pwc_device *pdev, int backlight)
-{
-	unsigned char buf;
-
-	if (backlight)
-		buf = 0xff;
-	else
-		buf = 0x0;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*backlight = !!buf;
-	return 0;
-}
-
-int pwc_set_colour_mode(struct pwc_device *pdev, int colour)
-{
-	unsigned char buf;
-
-	if (colour)
-		buf = 0xff;
-	else
-		buf = 0x0;
-	return send_control_msg(pdev,
-		SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
-}
-
-int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*colour = !!buf;
-	return 0;
-}
-
-
-int pwc_set_flicker(struct pwc_device *pdev, int flicker)
-{
-	unsigned char buf;
-
-	if (flicker)
-		buf = 0xff;
-	else
-		buf = 0x0;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
-}
-
-int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*flicker = !!buf;
-	return 0;
-}
-
-int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise)
-{
-	unsigned char buf;
-
-	if (noise < 0)
-		noise = 0;
-	if (noise > 3)
-		noise = 3;
-	buf = noise;
-	return send_control_msg(pdev,
-		SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
-		&buf, sizeof(buf));
-}
-
-int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
-{
-	int ret;
-	unsigned char buf;
-
-	ret = recv_control_msg(pdev,
-		GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
-		&buf, sizeof(buf));
-	if (ret < 0)
-		return ret;
-	*noise = buf;
-	return 0;
-}
-
 static int _pwc_mpt_reset(struct pwc_device *pdev, int flags)
 {
 	unsigned char buf;
@@ -1309,7 +777,7 @@ static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *st
 	return 0;
 }
 
-
+#ifdef CONFIG_USB_PWC_DEBUG
 int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 {
 	unsigned char buf;
@@ -1332,7 +800,7 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 		*sensor = buf;
 	return 0;
 }
-
+#endif
 
  /* End of Add-Ons                                    */
  /* ************************************************* */
@@ -1356,37 +824,41 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor)
 /* copy local variable to arg */
 #define ARG_OUT(ARG_name) /* nothing */
 
+/*
+ * Our ctrls use native values, but the old custom pwc ioctl interface expects
+ * values from 0 - 65535, define 2 helper functions to scale things. */
+static int pwc_ioctl_g_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return v4l2_ctrl_g_ctrl(ctrl) * 65535 / ctrl->maximum;
+}
+
+static int pwc_ioctl_s_ctrl(struct v4l2_ctrl *ctrl, int val)
+{
+	return v4l2_ctrl_s_ctrl(ctrl, val * ctrl->maximum / 65535);
+}
+
 long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 {
 	long ret = 0;
 
 	switch(cmd) {
 	case VIDIOCPWCRUSER:
-	{
-		if (pwc_restore_user(pdev))
-			ret = -EINVAL;
+		ret = pwc_button_ctrl(pdev, RESTORE_USER_DEFAULTS_FORMATTER);
 		break;
-	}
 
 	case VIDIOCPWCSUSER:
-	{
-		if (pwc_save_user(pdev))
-			ret = -EINVAL;
+		ret = pwc_button_ctrl(pdev, SAVE_USER_DEFAULTS_FORMATTER);
 		break;
-	}
 
 	case VIDIOCPWCFACTORY:
-	{
-		if (pwc_restore_factory(pdev))
-			ret = -EINVAL;
+		ret = pwc_button_ctrl(pdev, RESTORE_FACTORY_DEFAULTS_FORMATTER);
 		break;
-	}
 
 	case VIDIOCPWCSCQUAL:
 	{
 		ARG_DEF(int, qual)
 
-		if (pdev->iso_init) {
+		if (vb2_is_streaming(&pdev->vb_queue)) {
 			ret = -EBUSY;
 			break;
 		}
@@ -1396,8 +868,6 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 			ret = -EINVAL;
 		else
 			ret = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
-		if (ret >= 0)
-			pdev->vcompression = ARGR(qual);
 		break;
 	}
 
@@ -1432,71 +902,59 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSAGC:
 	{
 		ARG_DEF(int, agc)
-
 		ARG_IN(agc)
-		if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
-			ret = -EINVAL;
+		ret = v4l2_ctrl_s_ctrl(pdev->autogain, ARGR(agc) < 0);
+		if (ret == 0 && ARGR(agc) >= 0)
+			ret = pwc_ioctl_s_ctrl(pdev->gain, ARGR(agc));
 		break;
 	}
 
 	case VIDIOCPWCGAGC:
 	{
 		ARG_DEF(int, agc)
-
-		if (pwc_get_agc(pdev, ARGA(agc)))
-			ret = -EINVAL;
+		if (v4l2_ctrl_g_ctrl(pdev->autogain))
+			ARGR(agc) = -1;
+		else
+			ARGR(agc) = pwc_ioctl_g_ctrl(pdev->gain);
 		ARG_OUT(agc)
 		break;
 	}
 
 	case VIDIOCPWCSSHUTTER:
 	{
-		ARG_DEF(int, shutter_speed)
-
-		ARG_IN(shutter_speed)
-		ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
+		ARG_DEF(int, shutter)
+		ARG_IN(shutter)
+		ret = v4l2_ctrl_s_ctrl(pdev->exposure_auto,
+				       /* Menu idx 0 = auto, idx 1 = manual */
+				       ARGR(shutter) >= 0);
+		if (ret == 0 && ARGR(shutter) >= 0)
+			ret = pwc_ioctl_s_ctrl(pdev->exposure, ARGR(shutter));
 		break;
 	}
 
 	case VIDIOCPWCSAWB:
 	{
 		ARG_DEF(struct pwc_whitebalance, wb)
-
 		ARG_IN(wb)
-		ret = pwc_set_awb(pdev, ARGR(wb).mode);
-		if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
-			pwc_set_red_gain(pdev, ARGR(wb).manual_red);
-			pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
-		}
+		ret = v4l2_ctrl_s_ctrl(pdev->auto_white_balance,
+				       ARGR(wb).mode);
+		if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL)
+			ret = pwc_ioctl_s_ctrl(pdev->red_balance,
+					       ARGR(wb).manual_red);
+		if (ret == 0 && ARGR(wb).mode == PWC_WB_MANUAL)
+			ret = pwc_ioctl_s_ctrl(pdev->blue_balance,
+					       ARGR(wb).manual_blue);
 		break;
 	}
 
 	case VIDIOCPWCGAWB:
 	{
 		ARG_DEF(struct pwc_whitebalance, wb)
-
-		memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
-		ARGR(wb).mode = pwc_get_awb(pdev);
-		if (ARGR(wb).mode < 0)
-			ret = -EINVAL;
-		else {
-			if (ARGR(wb).mode == PWC_WB_MANUAL) {
-				ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
-				if (ret < 0)
-					break;
-				ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
-				if (ret < 0)
-					break;
-			}
-			if (ARGR(wb).mode == PWC_WB_AUTO) {
-				ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
-				if (ret < 0)
-					break;
-				ret = pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
-				if (ret < 0)
-					break;
-			}
-		}
+		ARGR(wb).mode = v4l2_ctrl_g_ctrl(pdev->auto_white_balance);
+		ARGR(wb).manual_red = ARGR(wb).read_red =
+			pwc_ioctl_g_ctrl(pdev->red_balance);
+		ARGR(wb).manual_blue = ARGR(wb).read_blue =
+			pwc_ioctl_g_ctrl(pdev->blue_balance);
 		ARG_OUT(wb)
 		break;
 	}
@@ -1550,17 +1008,20 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSCONTOUR:
 	{
 		ARG_DEF(int, contour)
-
 		ARG_IN(contour)
-		ret = pwc_set_contour(pdev, ARGR(contour));
+		ret = v4l2_ctrl_s_ctrl(pdev->autocontour, ARGR(contour) < 0);
+		if (ret == 0 && ARGR(contour) >= 0)
+			ret = pwc_ioctl_s_ctrl(pdev->contour, ARGR(contour));
 		break;
 	}
 
 	case VIDIOCPWCGCONTOUR:
 	{
 		ARG_DEF(int, contour)
-
-		ret = pwc_get_contour(pdev, ARGA(contour));
+		if (v4l2_ctrl_g_ctrl(pdev->autocontour))
+			ARGR(contour) = -1;
+		else
+			ARGR(contour) = pwc_ioctl_g_ctrl(pdev->contour);
 		ARG_OUT(contour)
 		break;
 	}
@@ -1568,17 +1029,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSBACKLIGHT:
 	{
 		ARG_DEF(int, backlight)
-
 		ARG_IN(backlight)
-		ret = pwc_set_backlight(pdev, ARGR(backlight));
+		ret = v4l2_ctrl_s_ctrl(pdev->backlight, ARGR(backlight));
 		break;
 	}
 
 	case VIDIOCPWCGBACKLIGHT:
 	{
 		ARG_DEF(int, backlight)
-
-		ret = pwc_get_backlight(pdev, ARGA(backlight));
+		ARGR(backlight) = v4l2_ctrl_g_ctrl(pdev->backlight);
 		ARG_OUT(backlight)
 		break;
 	}
@@ -1586,17 +1045,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSFLICKER:
 	{
 		ARG_DEF(int, flicker)
-
 		ARG_IN(flicker)
-		ret = pwc_set_flicker(pdev, ARGR(flicker));
+		ret = v4l2_ctrl_s_ctrl(pdev->flicker, ARGR(flicker));
 		break;
 	}
 
 	case VIDIOCPWCGFLICKER:
 	{
 		ARG_DEF(int, flicker)
-
-		ret = pwc_get_flicker(pdev, ARGA(flicker));
+		ARGR(flicker) = v4l2_ctrl_g_ctrl(pdev->flicker);
 		ARG_OUT(flicker)
 		break;
 	}
@@ -1604,17 +1061,15 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	case VIDIOCPWCSDYNNOISE:
 	{
 		ARG_DEF(int, dynnoise)
-
 		ARG_IN(dynnoise)
-		ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
+		ret = v4l2_ctrl_s_ctrl(pdev->noise_reduction, ARGR(dynnoise));
 		break;
 	}
 
 	case VIDIOCPWCGDYNNOISE:
 	{
 		ARG_DEF(int, dynnoise)
-
-		ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
+		ARGR(dynnoise) = v4l2_ctrl_g_ctrl(pdev->noise_reduction);
 		ARG_OUT(dynnoise);
 		break;
 	}
diff --git a/drivers/media/video/pwc/pwc-dec1.c b/drivers/media/video/pwc/pwc-dec1.c
index c29593f589e..be0e02cb487 100644
--- a/drivers/media/video/pwc/pwc-dec1.c
+++ b/drivers/media/video/pwc/pwc-dec1.c
@@ -22,29 +22,19 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
-
-
-
 #include "pwc-dec1.h"
 
-
-void pwc_dec1_init(int type, int release, void *buffer, void *table)
+int pwc_dec1_init(struct pwc_device *pwc, int type, int release, void *buffer)
 {
+	struct pwc_dec1_private *pdec;
 
-}
-
-void pwc_dec1_exit(void)
-{
+	if (pwc->decompress_data == NULL) {
+		pdec = kmalloc(sizeof(struct pwc_dec1_private), GFP_KERNEL);
+		if (pdec == NULL)
+			return -ENOMEM;
+		pwc->decompress_data = pdec;
+	}
+	pdec = pwc->decompress_data;
 
-
-
-}
-
-int pwc_dec1_alloc(struct pwc_device *pwc)
-{
-	pwc->decompress_data = kmalloc(sizeof(struct pwc_dec1_private), GFP_KERNEL);
-	if (pwc->decompress_data == NULL)
-		return -ENOMEM;
 	return 0;
 }
-
diff --git a/drivers/media/video/pwc/pwc-dec1.h b/drivers/media/video/pwc/pwc-dec1.h
index 8b62ddcc5c7..a57d8601080 100644
--- a/drivers/media/video/pwc/pwc-dec1.h
+++ b/drivers/media/video/pwc/pwc-dec1.h
@@ -22,8 +22,6 @@
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-
-
 #ifndef PWC_DEC1_H
 #define PWC_DEC1_H
 
@@ -32,12 +30,8 @@
 struct pwc_dec1_private
 {
 	int version;
-
 };
 
-int  pwc_dec1_alloc(struct pwc_device *pwc);
-void pwc_dec1_init(int type, int release, void *buffer, void *private_data);
-void pwc_dec1_exit(void);
+int pwc_dec1_init(struct pwc_device *pwc, int type, int release, void *buffer);
 
 #endif
-
diff --git a/drivers/media/video/pwc/pwc-dec23.c b/drivers/media/video/pwc/pwc-dec23.c
index 0c801b8f3ec..06a4e877ba4 100644
--- a/drivers/media/video/pwc/pwc-dec23.c
+++ b/drivers/media/video/pwc/pwc-dec23.c
@@ -916,27 +916,5 @@ void pwc_dec23_decompress(const struct pwc_device *pwc,
 			pout_planar_v += pwc->view.x;
 
 		}
-
 	}
-
 }
-
-void pwc_dec23_exit(void)
-{
-	/* Do nothing */
-
-}
-
-/**
- * Allocate a private structure used by lookup table.
- * You must call kfree() to free the memory allocated.
- */
-int pwc_dec23_alloc(struct pwc_device *pwc)
-{
-	pwc->decompress_data = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL);
-	if (pwc->decompress_data == NULL)
-		return -ENOMEM;
-	return 0;
-}
-
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
diff --git a/drivers/media/video/pwc/pwc-dec23.h b/drivers/media/video/pwc/pwc-dec23.h
index 1c55298ad15..a0ac4f3dff8 100644
--- a/drivers/media/video/pwc/pwc-dec23.h
+++ b/drivers/media/video/pwc/pwc-dec23.h
@@ -49,19 +49,9 @@ struct pwc_dec23_private
 
 };
 
-
-int pwc_dec23_alloc(struct pwc_device *pwc);
 int pwc_dec23_init(struct pwc_device *pwc, int type, unsigned char *cmd);
-void pwc_dec23_exit(void);
 void pwc_dec23_decompress(const struct pwc_device *pwc,
 			  const void *src,
 			  void *dst,
 			  int flags);
-
-
-
 #endif
-
-
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
-
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index b0bde5a87c8..51ca3589b1b 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -2,6 +2,7 @@
    USB and Video4Linux interface part.
    (C) 1999-2004 Nemosoft Unv.
    (C) 2004-2006 Luc Saillard (luc@saillard.org)
+   (C) 2011 Hans de Goede <hdegoede@redhat.com>
 
    NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
    driver and thus may have bugs that are not present in the original version.
@@ -74,7 +75,6 @@
 #include "pwc-timon.h"
 #include "pwc-dec23.h"
 #include "pwc-dec1.h"
-#include "pwc-uncompress.h"
 
 /* Function prototypes and driver templates */
 
@@ -116,6 +116,7 @@ MODULE_DEVICE_TABLE(usb, pwc_device_table);
 
 static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id *id);
 static void usb_pwc_disconnect(struct usb_interface *intf);
+static void pwc_isoc_cleanup(struct pwc_device *pdev);
 
 static struct usb_driver pwc_driver = {
 	.name =			"Philips webcam",	/* name */
@@ -127,14 +128,11 @@ static struct usb_driver pwc_driver = {
 #define MAX_DEV_HINTS	20
 #define MAX_ISOC_ERRORS	20
 
-static int default_size = PSZ_QCIF;
 static int default_fps = 10;
-static int default_fbufs = 3;   /* Default number of frame buffers */
-	int pwc_mbufs = 2;	/* Default number of mmap() buffers */
 #ifdef CONFIG_USB_PWC_DEBUG
 	int pwc_trace = PWC_DEBUG_LEVEL;
 #endif
-static int power_save;
+static int power_save = -1;
 static int led_on = 100, led_off; /* defaults to LED that is on while in use */
 static int pwc_preferred_compression = 1; /* 0..3 = uncompressed..high */
 static struct {
@@ -173,389 +171,20 @@ static struct video_device pwc_template = {
 /***************************************************************************/
 /* Private functions */
 
-/* Here we want the physical address of the memory.
- * This is used when initializing the contents of the area.
- */
-
-
-
-static void *pwc_rvmalloc(unsigned long size)
-{
-	void * mem;
-	unsigned long adr;
-
-	mem=vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr=(unsigned long) mem;
-	while (size > 0)
-	 {
-	   SetPageReserved(vmalloc_to_page((void *)adr));
-	   adr  += PAGE_SIZE;
-	   size -= PAGE_SIZE;
-	 }
-	return mem;
-}
-
-static void pwc_rvfree(void * mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr=(unsigned long) mem;
-	while ((long) size > 0)
-	 {
-	   ClearPageReserved(vmalloc_to_page((void *)adr));
-	   adr  += PAGE_SIZE;
-	   size -= PAGE_SIZE;
-	 }
-	vfree(mem);
-}
-
-
-
-
-static int pwc_allocate_buffers(struct pwc_device *pdev)
-{
-	int i, err;
-	void *kbuf;
-
-	PWC_DEBUG_MEMORY(">> pwc_allocate_buffers(pdev = 0x%p)\n", pdev);
-
-	if (pdev == NULL)
-		return -ENXIO;
-
-	/* Allocate Isochronuous pipe buffers */
-	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		if (pdev->sbuf[i].data == NULL) {
-			kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
-			if (kbuf == NULL) {
-				PWC_ERROR("Failed to allocate iso buffer %d.\n", i);
-				return -ENOMEM;
-			}
-			PWC_DEBUG_MEMORY("Allocated iso buffer at %p.\n", kbuf);
-			pdev->sbuf[i].data = kbuf;
-		}
-	}
-
-	/* Allocate frame buffer structure */
-	if (pdev->fbuf == NULL) {
-		kbuf = kzalloc(default_fbufs * sizeof(struct pwc_frame_buf), GFP_KERNEL);
-		if (kbuf == NULL) {
-			PWC_ERROR("Failed to allocate frame buffer structure.\n");
-			return -ENOMEM;
-		}
-		PWC_DEBUG_MEMORY("Allocated frame buffer structure at %p.\n", kbuf);
-		pdev->fbuf = kbuf;
-	}
-
-	/* create frame buffers, and make circular ring */
-	for (i = 0; i < default_fbufs; i++) {
-		if (pdev->fbuf[i].data == NULL) {
-			kbuf = vzalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
-			if (kbuf == NULL) {
-				PWC_ERROR("Failed to allocate frame buffer %d.\n", i);
-				return -ENOMEM;
-			}
-			PWC_DEBUG_MEMORY("Allocated frame buffer %d at %p.\n", i, kbuf);
-			pdev->fbuf[i].data = kbuf;
-		}
-	}
-
-	/* Allocate decompressor table space */
-	if (DEVICE_USE_CODEC1(pdev->type))
-		err = pwc_dec1_alloc(pdev);
-	else
-		err = pwc_dec23_alloc(pdev);
-
-	if (err) {
-		PWC_ERROR("Failed to allocate decompress table.\n");
-		return err;
-	}
-
-	/* Allocate image buffer; double buffer for mmap() */
-	kbuf = pwc_rvmalloc(pwc_mbufs * pdev->len_per_image);
-	if (kbuf == NULL) {
-		PWC_ERROR("Failed to allocate image buffer(s). needed (%d)\n",
-				pwc_mbufs * pdev->len_per_image);
-		return -ENOMEM;
-	}
-	PWC_DEBUG_MEMORY("Allocated image buffer at %p.\n", kbuf);
-	pdev->image_data = kbuf;
-	for (i = 0; i < pwc_mbufs; i++) {
-		pdev->images[i].offset = i * pdev->len_per_image;
-		pdev->images[i].vma_use_count = 0;
-	}
-	for (; i < MAX_IMAGES; i++) {
-		pdev->images[i].offset = 0;
-	}
-
-	kbuf = NULL;
-
-	PWC_DEBUG_MEMORY("<< pwc_allocate_buffers()\n");
-	return 0;
-}
-
-static void pwc_free_buffers(struct pwc_device *pdev)
-{
-	int i;
-
-	PWC_DEBUG_MEMORY("Entering free_buffers(%p).\n", pdev);
-
-	if (pdev == NULL)
-		return;
-	/* Release Iso-pipe buffers */
-	for (i = 0; i < MAX_ISO_BUFS; i++)
-		if (pdev->sbuf[i].data != NULL) {
-			PWC_DEBUG_MEMORY("Freeing ISO buffer at %p.\n", pdev->sbuf[i].data);
-			kfree(pdev->sbuf[i].data);
-			pdev->sbuf[i].data = NULL;
-		}
-
-	/* The same for frame buffers */
-	if (pdev->fbuf != NULL) {
-		for (i = 0; i < default_fbufs; i++) {
-			if (pdev->fbuf[i].data != NULL) {
-				PWC_DEBUG_MEMORY("Freeing frame buffer %d at %p.\n", i, pdev->fbuf[i].data);
-				vfree(pdev->fbuf[i].data);
-				pdev->fbuf[i].data = NULL;
-			}
-		}
-		kfree(pdev->fbuf);
-		pdev->fbuf = NULL;
-	}
-
-	/* Intermediate decompression buffer & tables */
-	if (pdev->decompress_data != NULL) {
-		PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n", pdev->decompress_data);
-		kfree(pdev->decompress_data);
-		pdev->decompress_data = NULL;
-	}
-
-	/* Release image buffers */
-	if (pdev->image_data != NULL) {
-		PWC_DEBUG_MEMORY("Freeing image buffer at %p.\n", pdev->image_data);
-		pwc_rvfree(pdev->image_data, pwc_mbufs * pdev->len_per_image);
-	}
-	pdev->image_data = NULL;
-
-	PWC_DEBUG_MEMORY("Leaving free_buffers().\n");
-}
-
-/* The frame & image buffer mess.
-
-   Yes, this is a mess. Well, it used to be simple, but alas...  In this
-   module, 3 buffers schemes are used to get the data from the USB bus to
-   the user program. The first scheme involves the ISO buffers (called thus
-   since they transport ISO data from the USB controller), and not really
-   interesting. Suffices to say the data from this buffer is quickly
-   gathered in an interrupt handler (pwc_isoc_handler) and placed into the
-   frame buffer.
-
-   The frame buffer is the second scheme, and is the central element here.
-   It collects the data from a single frame from the camera (hence, the
-   name). Frames are delimited by the USB camera with a short USB packet,
-   so that's easy to detect. The frame buffers form a list that is filled
-   by the camera+USB controller and drained by the user process through
-   either read() or mmap().
-
-   The image buffer is the third scheme, in which frames are decompressed
-   and converted into planar format. For mmap() there is more than
-   one image buffer available.
-
-   The frame buffers provide the image buffering. In case the user process
-   is a bit slow, this introduces lag and some undesired side-effects.
-   The problem arises when the frame buffer is full. I used to drop the last
-   frame, which makes the data in the queue stale very quickly. But dropping
-   the frame at the head of the queue proved to be a litte bit more difficult.
-   I tried a circular linked scheme, but this introduced more problems than
-   it solved.
-
-   Because filling and draining are completely asynchronous processes, this
-   requires some fiddling with pointers and mutexes.
-
-   Eventually, I came up with a system with 2 lists: an 'empty' frame list
-   and a 'full' frame list:
-     * Initially, all frame buffers but one are on the 'empty' list; the one
-       remaining buffer is our initial fill frame.
-     * If a frame is needed for filling, we try to take it from the 'empty'
-       list, unless that list is empty, in which case we take the buffer at
-       the head of the 'full' list.
-     * When our fill buffer has been filled, it is appended to the 'full'
-       list.
-     * If a frame is needed by read() or mmap(), it is taken from the head of
-       the 'full' list, handled, and then appended to the 'empty' list. If no
-       buffer is present on the 'full' list, we wait.
-   The advantage is that the buffer that is currently being decompressed/
-   converted, is on neither list, and thus not in our way (any other scheme
-   I tried had the problem of old data lingering in the queue).
-
-   Whatever strategy you choose, it always remains a tradeoff: with more
-   frame buffers the chances of a missed frame are reduced. On the other
-   hand, on slower machines it introduces lag because the queue will
-   always be full.
- */
-
-/**
-  \brief Find next frame buffer to fill. Take from empty or full list, whichever comes first.
- */
-static int pwc_next_fill_frame(struct pwc_device *pdev)
-{
-	int ret;
-	unsigned long flags;
-
-	ret = 0;
-	spin_lock_irqsave(&pdev->ptrlock, flags);
-	if (pdev->fill_frame != NULL) {
-		/* append to 'full' list */
-		if (pdev->full_frames == NULL) {
-			pdev->full_frames = pdev->fill_frame;
-			pdev->full_frames_tail = pdev->full_frames;
-		}
-		else {
-			pdev->full_frames_tail->next = pdev->fill_frame;
-			pdev->full_frames_tail = pdev->fill_frame;
-		}
-	}
-	if (pdev->empty_frames != NULL) {
-		/* We have empty frames available. That's easy */
-		pdev->fill_frame = pdev->empty_frames;
-		pdev->empty_frames = pdev->empty_frames->next;
-	}
-	else {
-		/* Hmm. Take it from the full list */
-		/* sanity check */
-		if (pdev->full_frames == NULL) {
-			PWC_ERROR("Neither empty or full frames available!\n");
-			spin_unlock_irqrestore(&pdev->ptrlock, flags);
-			return -EINVAL;
-		}
-		pdev->fill_frame = pdev->full_frames;
-		pdev->full_frames = pdev->full_frames->next;
-		ret = 1;
-	}
-	pdev->fill_frame->next = NULL;
-	spin_unlock_irqrestore(&pdev->ptrlock, flags);
-	return ret;
-}
-
-
-/**
-  \brief Reset all buffers, pointers and lists, except for the image_used[] buffer.
-
-  If the image_used[] buffer is cleared too, mmap()/VIDIOCSYNC will run into trouble.
- */
-static void pwc_reset_buffers(struct pwc_device *pdev)
-{
-	int i;
-	unsigned long flags;
-
-	PWC_DEBUG_MEMORY(">> %s __enter__\n", __func__);
-
-	spin_lock_irqsave(&pdev->ptrlock, flags);
-	pdev->full_frames = NULL;
-	pdev->full_frames_tail = NULL;
-	for (i = 0; i < default_fbufs; i++) {
-		pdev->fbuf[i].filled = 0;
-		if (i > 0)
-			pdev->fbuf[i].next = &pdev->fbuf[i - 1];
-		else
-			pdev->fbuf->next = NULL;
-	}
-	pdev->empty_frames = &pdev->fbuf[default_fbufs - 1];
-	pdev->empty_frames_tail = pdev->fbuf;
-	pdev->read_frame = NULL;
-	pdev->fill_frame = pdev->empty_frames;
-	pdev->empty_frames = pdev->empty_frames->next;
-
-	pdev->image_read_pos = 0;
-	pdev->fill_image = 0;
-	spin_unlock_irqrestore(&pdev->ptrlock, flags);
-
-	PWC_DEBUG_MEMORY("<< %s __leaving__\n", __func__);
-}
-
-
-/**
-  \brief Do all the handling for getting one frame: get pointer, decompress, advance pointers.
- */
-int pwc_handle_frame(struct pwc_device *pdev)
+struct pwc_frame_buf *pwc_get_next_fill_buf(struct pwc_device *pdev)
 {
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pdev->ptrlock, flags);
-	/* First grab our read_frame; this is removed from all lists, so
-	   we can release the lock after this without problems */
-	if (pdev->read_frame != NULL) {
-		/* This can't theoretically happen */
-		PWC_ERROR("Huh? Read frame still in use?\n");
-		spin_unlock_irqrestore(&pdev->ptrlock, flags);
-		return ret;
-	}
-
-
-	if (pdev->full_frames == NULL) {
-		PWC_ERROR("Woops. No frames ready.\n");
-	}
-	else {
-		pdev->read_frame = pdev->full_frames;
-		pdev->full_frames = pdev->full_frames->next;
-		pdev->read_frame->next = NULL;
-	}
-
-	if (pdev->read_frame != NULL) {
-		/* Decompression is a lengthy process, so it's outside of the lock.
-		   This gives the isoc_handler the opportunity to fill more frames
-		   in the mean time.
-		*/
-		spin_unlock_irqrestore(&pdev->ptrlock, flags);
-		ret = pwc_decompress(pdev);
-		spin_lock_irqsave(&pdev->ptrlock, flags);
-
-		/* We're done with read_buffer, tack it to the end of the empty buffer list */
-		if (pdev->empty_frames == NULL) {
-			pdev->empty_frames = pdev->read_frame;
-			pdev->empty_frames_tail = pdev->empty_frames;
-		}
-		else {
-			pdev->empty_frames_tail->next = pdev->read_frame;
-			pdev->empty_frames_tail = pdev->read_frame;
-		}
-		pdev->read_frame = NULL;
-	}
-	spin_unlock_irqrestore(&pdev->ptrlock, flags);
-	return ret;
-}
-
-/**
-  \brief Advance pointers of image buffer (after each user request)
-*/
-void pwc_next_image(struct pwc_device *pdev)
-{
-	pdev->image_used[pdev->fill_image] = 0;
-	pdev->fill_image = (pdev->fill_image + 1) % pwc_mbufs;
-}
-
-/**
- * Print debug information when a frame is discarded because all of our buffer
- * is full
- */
-static void pwc_frame_dumped(struct pwc_device *pdev)
-{
-	pdev->vframes_dumped++;
-	if (pdev->vframe_count < FRAME_LOWMARK)
-		return;
-
-	if (pdev->vframes_dumped < 20)
-		PWC_DEBUG_FLOW("Dumping frame %d\n", pdev->vframe_count);
-	else if (pdev->vframes_dumped == 20)
-		PWC_DEBUG_FLOW("Dumping frame %d (last message)\n",
-				pdev->vframe_count);
+	unsigned long flags = 0;
+	struct pwc_frame_buf *buf = NULL;
+
+	spin_lock_irqsave(&pdev->queued_bufs_lock, flags);
+	if (list_empty(&pdev->queued_bufs))
+		goto leave;
+
+	buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf, list);
+	list_del(&buf->list);
+leave:
+	spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags);
+	return buf;
 }
 
 static void pwc_snapshot_button(struct pwc_device *pdev, int down)
@@ -575,9 +204,9 @@ static void pwc_snapshot_button(struct pwc_device *pdev, int down)
 #endif
 }
 
-static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_buf *fbuf)
+static void pwc_frame_complete(struct pwc_device *pdev)
 {
-	int awake = 0;
+	struct pwc_frame_buf *fbuf = pdev->fill_buf;
 
 	/* The ToUCam Fun CMOS sensor causes the firmware to send 2 or 3 bogus
 	   frames on the USB wire after an exposure change. This conditition is
@@ -589,7 +218,6 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
 		if (ptr[1] == 1 && ptr[0] & 0x10) {
 			PWC_TRACE("Hyundai CMOS sensor bug. Dropping frame.\n");
 			pdev->drop_frames += 2;
-			pdev->vframes_error++;
 		}
 		if ((ptr[0] ^ pdev->vmirror) & 0x01) {
 			pwc_snapshot_button(pdev, ptr[0] & 0x01);
@@ -612,8 +240,7 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
 		   */
 		if (fbuf->filled == 4)
 			pdev->drop_frames++;
-	}
-	else if (pdev->type == 740 || pdev->type == 720) {
+	} else if (pdev->type == 740 || pdev->type == 720) {
 		unsigned char *ptr = (unsigned char *)fbuf->data;
 		if ((ptr[0] ^ pdev->vmirror) & 0x01) {
 			pwc_snapshot_button(pdev, ptr[0] & 0x01);
@@ -621,33 +248,23 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
 		pdev->vmirror = ptr[0] & 0x03;
 	}
 
-	/* In case we were instructed to drop the frame, do so silently.
-	   The buffer pointers are not updated either (but the counters are reset below).
-	   */
-	if (pdev->drop_frames > 0)
+	/* In case we were instructed to drop the frame, do so silently. */
+	if (pdev->drop_frames > 0) {
 		pdev->drop_frames--;
-	else {
+	} else {
 		/* Check for underflow first */
 		if (fbuf->filled < pdev->frame_total_size) {
 			PWC_DEBUG_FLOW("Frame buffer underflow (%d bytes);"
 				       " discarded.\n", fbuf->filled);
-			pdev->vframes_error++;
-		}
-		else {
-			/* Send only once per EOF */
-			awake = 1; /* delay wake_ups */
-
-			/* Find our next frame to fill. This will always succeed, since we
-			 * nick a frame from either empty or full list, but if we had to
-			 * take it from the full list, it means a frame got dropped.
-			 */
-			if (pwc_next_fill_frame(pdev))
-				pwc_frame_dumped(pdev);
-
+		} else {
+			fbuf->vb.v4l2_buf.field = V4L2_FIELD_NONE;
+			fbuf->vb.v4l2_buf.sequence = pdev->vframe_count;
+			vb2_buffer_done(&fbuf->vb, VB2_BUF_STATE_DONE);
+			pdev->fill_buf = NULL;
+			pdev->vsync = 0;
 		}
 	} /* !drop_frames */
 	pdev->vframe_count++;
-	return awake;
 }
 
 /* This gets called for the Isochronous pipe (video). This is done in
@@ -655,24 +272,20 @@ static int pwc_rcv_short_packet(struct pwc_device *pdev, const struct pwc_frame_
  */
 static void pwc_isoc_handler(struct urb *urb)
 {
-	struct pwc_device *pdev;
+	struct pwc_device *pdev = (struct pwc_device *)urb->context;
 	int i, fst, flen;
-	int awake;
-	struct pwc_frame_buf *fbuf;
-	unsigned char *fillptr = NULL, *iso_buf = NULL;
+	unsigned char *iso_buf = NULL;
 
-	awake = 0;
-	pdev = (struct pwc_device *)urb->context;
-	if (pdev == NULL) {
-		PWC_ERROR("isoc_handler() called with NULL device?!\n");
-		return;
-	}
-
-	if (urb->status == -ENOENT || urb->status == -ECONNRESET) {
+	if (urb->status == -ENOENT || urb->status == -ECONNRESET ||
+	    urb->status == -ESHUTDOWN) {
 		PWC_DEBUG_OPEN("URB (%p) unlinked %ssynchronuously.\n", urb, urb->status == -ENOENT ? "" : "a");
 		return;
 	}
-	if (urb->status != -EINPROGRESS && urb->status != 0) {
+
+	if (pdev->fill_buf == NULL)
+		pdev->fill_buf = pwc_get_next_fill_buf(pdev);
+
+	if (urb->status != 0) {
 		const char *errmsg;
 
 		errmsg = "Unknown";
@@ -684,29 +297,21 @@ static void pwc_isoc_handler(struct urb *urb)
 			case -EILSEQ:		errmsg = "CRC/Timeout (could be anything)"; break;
 			case -ETIME:		errmsg = "Device does not respond"; break;
 		}
-		PWC_DEBUG_FLOW("pwc_isoc_handler() called with status %d [%s].\n", urb->status, errmsg);
-		/* Give up after a number of contiguous errors on the USB bus.
-		   Appearantly something is wrong so we simulate an unplug event.
-		 */
+		PWC_ERROR("pwc_isoc_handler() called with status %d [%s].\n",
+			  urb->status, errmsg);
+		/* Give up after a number of contiguous errors */
 		if (++pdev->visoc_errors > MAX_ISOC_ERRORS)
 		{
-			PWC_INFO("Too many ISOC errors, bailing out.\n");
-			pdev->error_status = EIO;
-			awake = 1;
-			wake_up_interruptible(&pdev->frameq);
+			PWC_ERROR("Too many ISOC errors, bailing out.\n");
+			if (pdev->fill_buf) {
+				vb2_buffer_done(&pdev->fill_buf->vb,
+						VB2_BUF_STATE_ERROR);
+				pdev->fill_buf = NULL;
+			}
 		}
-		goto handler_end; // ugly, but practical
-	}
-
-	fbuf = pdev->fill_frame;
-	if (fbuf == NULL) {
-		PWC_ERROR("pwc_isoc_handler without valid fill frame.\n");
-		awake = 1;
+		pdev->vsync = 0; /* Drop the current frame */
 		goto handler_end;
 	}
-	else {
-		fillptr = fbuf->data + fbuf->filled;
-	}
 
 	/* Reset ISOC error counter. We did get here, after all. */
 	pdev->visoc_errors = 0;
@@ -720,89 +325,73 @@ static void pwc_isoc_handler(struct urb *urb)
 		fst  = urb->iso_frame_desc[i].status;
 		flen = urb->iso_frame_desc[i].actual_length;
 		iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-		if (fst == 0) {
-			if (flen > 0) { /* if valid data... */
-				if (pdev->vsync > 0) { /* ...and we are not sync-hunting... */
-					pdev->vsync = 2;
-
-					/* ...copy data to frame buffer, if possible */
-					if (flen + fbuf->filled > pdev->frame_total_size) {
-						PWC_DEBUG_FLOW("Frame buffer overflow (flen = %d, frame_total_size = %d).\n", flen, pdev->frame_total_size);
-						pdev->vsync = 0; /* Hmm, let's wait for an EOF (end-of-frame) */
-						pdev->vframes_error++;
-					}
-					else {
-						memmove(fillptr, iso_buf, flen);
-						fillptr += flen;
-					}
-				}
+		if (fst != 0) {
+			PWC_ERROR("Iso frame %d has error %d\n", i, fst);
+			continue;
+		}
+		if (flen > 0 && pdev->vsync) {
+			struct pwc_frame_buf *fbuf = pdev->fill_buf;
+
+			if (pdev->vsync == 1) {
+				do_gettimeofday(&fbuf->vb.v4l2_buf.timestamp);
+				pdev->vsync = 2;
+			}
+
+			if (flen + fbuf->filled > pdev->frame_total_size) {
+				PWC_ERROR("Frame overflow (%d > %d)\n",
+					  flen + fbuf->filled,
+					  pdev->frame_total_size);
+				pdev->vsync = 0; /* Let's wait for an EOF */
+			} else {
+				memcpy(fbuf->data + fbuf->filled, iso_buf,
+				       flen);
 				fbuf->filled += flen;
-			} /* ..flen > 0 */
-
-			if (flen < pdev->vlast_packet_size) {
-				/* Shorter packet... We probably have the end of an image-frame;
-				   wake up read() process and let select()/poll() do something.
-				   Decompression is done in user time over there.
-				   */
-				if (pdev->vsync == 2) {
-					if (pwc_rcv_short_packet(pdev, fbuf)) {
-						awake = 1;
-						fbuf = pdev->fill_frame;
-					}
-				}
-				fbuf->filled = 0;
-				fillptr = fbuf->data;
+			}
+		}
+		if (flen < pdev->vlast_packet_size) {
+			/* Shorter packet... end of frame */
+			if (pdev->vsync == 2)
+				pwc_frame_complete(pdev);
+			if (pdev->fill_buf == NULL)
+				pdev->fill_buf = pwc_get_next_fill_buf(pdev);
+			if (pdev->fill_buf) {
+				pdev->fill_buf->filled = 0;
 				pdev->vsync = 1;
 			}
-
-			pdev->vlast_packet_size = flen;
-		} /* ..status == 0 */
-		else {
-			/* This is normally not interesting to the user, unless
-			 * you are really debugging something, default = 0 */
-			static int iso_error;
-			iso_error++;
-			if (iso_error < 20)
-				PWC_DEBUG_FLOW("Iso frame %d of USB has error %d\n", i, fst);
 		}
+		pdev->vlast_packet_size = flen;
 	}
 
 handler_end:
-	if (awake)
-		wake_up_interruptible(&pdev->frameq);
-
-	urb->dev = pdev->udev;
 	i = usb_submit_urb(urb, GFP_ATOMIC);
 	if (i != 0)
 		PWC_ERROR("Error (%d) re-submitting urb in pwc_isoc_handler.\n", i);
 }
 
-
-int pwc_isoc_init(struct pwc_device *pdev)
+static int pwc_isoc_init(struct pwc_device *pdev)
 {
 	struct usb_device *udev;
 	struct urb *urb;
 	int i, j, ret;
-
 	struct usb_interface *intf;
 	struct usb_host_interface *idesc = NULL;
 
-	if (pdev == NULL)
-		return -EFAULT;
 	if (pdev->iso_init)
 		return 0;
+
 	pdev->vsync = 0;
+	pdev->vlast_packet_size = 0;
+	pdev->fill_buf = NULL;
+	pdev->vframe_count = 0;
+	pdev->visoc_errors = 0;
 	udev = pdev->udev;
 
 	/* Get the current alternate interface, adjust packet size */
-	if (!udev->actconfig)
-		return -EFAULT;
 	intf = usb_ifnum_to_if(udev, 0);
 	if (intf)
 		idesc = usb_altnum_to_altsetting(intf, pdev->valternate);
-
 	if (!idesc)
-		return -EFAULT;
+		return -EIO;
 
 	/* Search video endpoint */
 	pdev->vmax_packet_size = -1;
@@ -825,34 +414,32 @@ int pwc_isoc_init(struct pwc_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	/* Allocate and init Isochronuous urbs */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
 		if (urb == NULL) {
 			PWC_ERROR("Failed to allocate urb %d\n", i);
-			ret = -ENOMEM;
-			break;
+			pdev->iso_init = 1;
+			pwc_isoc_cleanup(pdev);
+			return -ENOMEM;
 		}
-		pdev->sbuf[i].urb = urb;
+		pdev->urbs[i] = urb;
 		PWC_DEBUG_MEMORY("Allocated URB at 0x%p\n", urb);
-	}
-	if (ret) {
-		/* De-allocate in reverse order */
-		while (i--) {
-			usb_free_urb(pdev->sbuf[i].urb);
-			pdev->sbuf[i].urb = NULL;
-		}
-		return ret;
-	}
-
-	/* init URB structure */
-	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		urb = pdev->sbuf[i].urb;
 
 		urb->interval = 1; // devik
 		urb->dev = udev;
 		urb->pipe = usb_rcvisocpipe(udev, pdev->vendpoint);
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = pdev->sbuf[i].data;
+		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+		urb->transfer_buffer = usb_alloc_coherent(udev,
+							  ISO_BUFFER_SIZE,
+							  GFP_KERNEL,
+							  &urb->transfer_dma);
+		if (urb->transfer_buffer == NULL) {
+			PWC_ERROR("Failed to allocate urb buffer %d\n", i);
+			pdev->iso_init = 1;
+			pwc_isoc_cleanup(pdev);
+			return -ENOMEM;
+		}
 		urb->transfer_buffer_length = ISO_BUFFER_SIZE;
 		urb->complete = pwc_isoc_handler;
 		urb->context = pdev;
@@ -866,14 +453,14 @@ int pwc_isoc_init(struct pwc_device *pdev)
 
 	/* link */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL);
+		ret = usb_submit_urb(pdev->urbs[i], GFP_KERNEL);
 		if (ret) {
 			PWC_ERROR("isoc_init() submit_urb %d failed with error %d\n", i, ret);
 			pdev->iso_init = 1;
 			pwc_isoc_cleanup(pdev);
 			return ret;
 		}
-		PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb);
+		PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->urbs[i]);
 	}
 
 	/* All is done... */
@@ -888,12 +475,9 @@ static void pwc_iso_stop(struct pwc_device *pdev)
 
 	/* Unlinking ISOC buffers one by one */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		struct urb *urb;
-
-		urb = pdev->sbuf[i].urb;
-		if (urb) {
-			PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
-			usb_kill_urb(urb);
+		if (pdev->urbs[i]) {
+			PWC_DEBUG_MEMORY("Unlinking URB %p\n", pdev->urbs[i]);
+			usb_kill_urb(pdev->urbs[i]);
 		}
 	}
 }
@@ -904,40 +488,51 @@ static void pwc_iso_free(struct pwc_device *pdev)
 
 	/* Freeing ISOC buffers one by one */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
-		struct urb *urb;
-
-		urb = pdev->sbuf[i].urb;
-		if (urb) {
+		if (pdev->urbs[i]) {
 			PWC_DEBUG_MEMORY("Freeing URB\n");
-			usb_free_urb(urb);
-			pdev->sbuf[i].urb = NULL;
+			if (pdev->urbs[i]->transfer_buffer) {
+				usb_free_coherent(pdev->udev,
+					pdev->urbs[i]->transfer_buffer_length,
+					pdev->urbs[i]->transfer_buffer,
+					pdev->urbs[i]->transfer_dma);
+			}
+			usb_free_urb(pdev->urbs[i]);
+			pdev->urbs[i] = NULL;
 		}
 	}
 }
 
-void pwc_isoc_cleanup(struct pwc_device *pdev)
+static void pwc_isoc_cleanup(struct pwc_device *pdev)
 {
 	PWC_DEBUG_OPEN(">> pwc_isoc_cleanup()\n");
-	if (pdev == NULL)
-		return;
+
 	if (pdev->iso_init == 0)
 		return;
 
 	pwc_iso_stop(pdev);
 	pwc_iso_free(pdev);
-
-	/* Stop camera, but only if we are sure the camera is still there (unplug
-	   is signalled by EPIPE)
-	 */
-	if (pdev->error_status != EPIPE) {
-		PWC_DEBUG_OPEN("Setting alternate interface 0.\n");
-		usb_set_interface(pdev->udev, 0, 0);
-	}
+	usb_set_interface(pdev->udev, 0, 0);
 
 	pdev->iso_init = 0;
 	PWC_DEBUG_OPEN("<< pwc_isoc_cleanup()\n");
 }
 
+/*
+ * Release all queued buffers, no need to take queued_bufs_lock, since all
+ * iso urbs have been killed when we're called so pwc_isoc_handler won't run.
+ */
+static void pwc_cleanup_queued_bufs(struct pwc_device *pdev)
+{
+	while (!list_empty(&pdev->queued_bufs)) {
+		struct pwc_frame_buf *buf;
+
+		buf = list_entry(pdev->queued_bufs.next, struct pwc_frame_buf,
+				 list);
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+	}
+}
+
 /*********
  * sysfs
  *********/
@@ -1051,98 +646,15 @@ static const char *pwc_sensor_type_to_string(unsigned int sensor_type)
 
 static int pwc_video_open(struct file *file)
 {
-	int i, ret;
 	struct video_device *vdev = video_devdata(file);
 	struct pwc_device *pdev;
 
 	PWC_DEBUG_OPEN(">> video_open called(vdev = 0x%p).\n", vdev);
 
 	pdev = video_get_drvdata(vdev);
-	BUG_ON(!pdev);
-	if (pdev->vopen) {
-		PWC_DEBUG_OPEN("I'm busy, someone is using the device.\n");
-		return -EBUSY;
-	}
-
-	pwc_construct(pdev); /* set min/max sizes correct */
-	if (!pdev->usb_init) {
-		PWC_DEBUG_OPEN("Doing first time initialization.\n");
-		pdev->usb_init = 1;
-
-		/* Query sensor type */
-		ret = pwc_get_cmos_sensor(pdev, &i);
-		if (ret >= 0)
-		{
-			PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
-					pdev->vdev.name,
-					pwc_sensor_type_to_string(i), i);
-		}
-	}
-
-	/* Turn on camera */
-	if (power_save) {
-		i = pwc_camera_power(pdev, 1);
-		if (i < 0)
-			PWC_DEBUG_OPEN("Failed to restore power to the camera! (%d)\n", i);
-	}
-	/* Set LED on/off time */
-	if (pwc_set_leds(pdev, led_on, led_off) < 0)
-		PWC_DEBUG_OPEN("Failed to set LED on/off time.\n");
-
-
-	/* So far, so good. Allocate memory. */
-	i = pwc_allocate_buffers(pdev);
-	if (i < 0) {
-		PWC_DEBUG_OPEN("Failed to allocate buffers memory.\n");
-		pwc_free_buffers(pdev);
-		return i;
-	}
-
-	/* Reset buffers & parameters */
-	pwc_reset_buffers(pdev);
-	for (i = 0; i < pwc_mbufs; i++)
-		pdev->image_used[i] = 0;
-	pdev->vframe_count = 0;
-	pdev->vframes_dumped = 0;
-	pdev->vframes_error = 0;
-	pdev->visoc_errors = 0;
-	pdev->error_status = 0;
-	pwc_construct(pdev); /* set min/max sizes correct */
-
-	/* Set some defaults */
-	pdev->vsnapshot = 0;
-
-	/* Set video size, first try the last used video size
-	   (or the default one); if that fails try QCIF/10 or QSIF/10;
-	   it that fails too, give up.
-	 */
-	i = pwc_set_video_mode(pdev, pwc_image_sizes[pdev->vsize].x, pwc_image_sizes[pdev->vsize].y, pdev->vframes, pdev->vcompression, 0);
-	if (i)	{
-		unsigned int default_resolution;
-		PWC_DEBUG_OPEN("First attempt at set_video_mode failed.\n");
-		if (pdev->type>= 730)
-			default_resolution = PSZ_QSIF;
-		else
-			default_resolution = PSZ_QCIF;
-
-		i = pwc_set_video_mode(pdev,
-				       pwc_image_sizes[default_resolution].x,
-				       pwc_image_sizes[default_resolution].y,
-				       10,
-				       pdev->vcompression,
-				       0);
-	}
-	if (i) {
-		PWC_DEBUG_OPEN("Second attempt at set_video_mode failed.\n");
-		pwc_free_buffers(pdev);
-		return i;
-	}
-
-	/* Initialize the webcam to sane value */
-	pwc_set_brightness(pdev, 0x7fff);
-	pwc_set_agc(pdev, 1, 0);
+	if (!pdev->udev)
+		return -ENODEV;
 
-	pdev->vopen++;
 	file->private_data = vdev;
 	PWC_DEBUG_OPEN("<< video_open() returns 0.\n");
 	return 0;
@@ -1158,239 +670,211 @@ static void pwc_video_release(struct video_device *vfd)
 		if (device_hint[hint].pdev == pdev)
 			device_hint[hint].pdev = NULL;
 
+	/* Free intermediate decompression buffer & tables */
+	if (pdev->decompress_data != NULL) {
+		PWC_DEBUG_MEMORY("Freeing decompression buffer at %p.\n",
+				 pdev->decompress_data);
+		kfree(pdev->decompress_data);
+		pdev->decompress_data = NULL;
+	}
+
+	v4l2_ctrl_handler_free(&pdev->ctrl_handler);
+
 	kfree(pdev);
 }
 
-/* Note that all cleanup is done in the reverse order as in _open */
 static int pwc_video_close(struct file *file)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
-	int i;
 
 	PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
 
 	pdev = video_get_drvdata(vdev);
-	if (pdev->vopen == 0)
-		PWC_DEBUG_MODULE("video_close() called on closed device?\n");
-
-	/* Dump statistics, but only if a reasonable amount of frames were
-	   processed (to prevent endless log-entries in case of snap-shot
-	   programs)
-	 */
-	if (pdev->vframe_count > 20)
-		PWC_DEBUG_MODULE("Closing video device: %d frames received, dumped %d frames, %d frames with errors.\n", pdev->vframe_count, pdev->vframes_dumped, pdev->vframes_error);
-
-	if (DEVICE_USE_CODEC1(pdev->type))
-	    pwc_dec1_exit();
-	else
-	    pwc_dec23_exit();
-
-	pwc_isoc_cleanup(pdev);
-	pwc_free_buffers(pdev);
-
-	/* Turn off LEDS and power down camera, but only when not unplugged */
-	if (!pdev->unplugged) {
-		/* Turn LEDs off */
-		if (pwc_set_leds(pdev, 0, 0) < 0)
-			PWC_DEBUG_MODULE("Failed to set LED on/off time.\n");
-		if (power_save) {
-			i = pwc_camera_power(pdev, 0);
-			if (i < 0)
-				PWC_ERROR("Failed to power down camera (%d)\n", i);
-		}
-		pdev->vopen--;
-		PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen);
+	if (pdev->capt_file == file) {
+		vb2_queue_release(&pdev->vb_queue);
+		pdev->capt_file = NULL;
 	}
 
+	PWC_DEBUG_OPEN("<< video_close()\n");
 	return 0;
 }
 
-/*
- *	FIXME: what about two parallel reads ????
- *      ANSWER: Not supported. You can't open the device more than once,
-		despite what the V4L1 interface says. First, I don't see
-		the need, second there's no mechanism of alerting the
-		2nd/3rd/... process of events like changing image size.
-		And I don't see the point of blocking that for the
-		2nd/3rd/... process.
-		In multi-threaded environments reading parallel from any
-		device is tricky anyhow.
- */
-
 static ssize_t pwc_video_read(struct file *file, char __user *buf,
-			  size_t count, loff_t *ppos)
+			      size_t count, loff_t *ppos)
 {
 	struct video_device *vdev = file->private_data;
-	struct pwc_device *pdev;
-	int noblock = file->f_flags & O_NONBLOCK;
-	DECLARE_WAITQUEUE(wait, current);
-	int bytes_to_read, rv = 0;
-	void *image_buffer_addr;
-
-	PWC_DEBUG_READ("pwc_video_read(vdev=0x%p, buf=%p, count=%zd) called.\n",
-			vdev, buf, count);
-	if (vdev == NULL)
-		return -EFAULT;
-	pdev = video_get_drvdata(vdev);
-	if (pdev == NULL)
-		return -EFAULT;
+	struct pwc_device *pdev = video_get_drvdata(vdev);
 
-	if (pdev->error_status) {
-		rv = -pdev->error_status; /* Something happened, report what. */
-		goto err_out;
-	}
+	if (!pdev->udev)
+		return -ENODEV;
 
-	/* Start the stream (if not already started) */
-	rv = pwc_isoc_init(pdev);
-	if (rv)
-		goto err_out;
-
-	/* In case we're doing partial reads, we don't have to wait for a frame */
-	if (pdev->image_read_pos == 0) {
-		/* Do wait queueing according to the (doc)book */
-		add_wait_queue(&pdev->frameq, &wait);
-		while (pdev->full_frames == NULL) {
-			/* Check for unplugged/etc. here */
-			if (pdev->error_status) {
-				remove_wait_queue(&pdev->frameq, &wait);
-				set_current_state(TASK_RUNNING);
-				rv = -pdev->error_status ;
-				goto err_out;
-			}
-			if (noblock) {
-				remove_wait_queue(&pdev->frameq, &wait);
-				set_current_state(TASK_RUNNING);
-				rv = -EWOULDBLOCK;
-				goto err_out;
-			}
-			if (signal_pending(current)) {
-				remove_wait_queue(&pdev->frameq, &wait);
-				set_current_state(TASK_RUNNING);
-				rv = -ERESTARTSYS;
-				goto err_out;
-			}
-			mutex_unlock(&pdev->modlock);
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-			mutex_lock(&pdev->modlock);
-		}
-		remove_wait_queue(&pdev->frameq, &wait);
-		set_current_state(TASK_RUNNING);
+	if (pdev->capt_file != NULL &&
+	    pdev->capt_file != file)
+		return -EBUSY;
 
-		/* Decompress and release frame */
-		if (pwc_handle_frame(pdev)) {
-			rv = -EFAULT;
-			goto err_out;
-		}
-	}
+	pdev->capt_file = file;
 
-	PWC_DEBUG_READ("Copying data to user space.\n");
-	if (pdev->pixfmt != V4L2_PIX_FMT_YUV420)
-		bytes_to_read = pdev->frame_size + sizeof(struct pwc_raw_frame);
-	else
-		bytes_to_read = pdev->view.size;
-
-	/* copy bytes to user space; we allow for partial reads */
-	if (count + pdev->image_read_pos > bytes_to_read)
-		count = bytes_to_read - pdev->image_read_pos;
-	image_buffer_addr = pdev->image_data;
-	image_buffer_addr += pdev->images[pdev->fill_image].offset;
-	image_buffer_addr += pdev->image_read_pos;
-	if (copy_to_user(buf, image_buffer_addr, count)) {
-		rv = -EFAULT;
-		goto err_out;
-	}
-	pdev->image_read_pos += count;
-	if (pdev->image_read_pos >= bytes_to_read) { /* All data has been read */
-		pdev->image_read_pos = 0;
-		pwc_next_image(pdev);
-	}
-	return count;
-err_out:
-	return rv;
+	return vb2_read(&pdev->vb_queue, buf, count, ppos,
+			file->f_flags & O_NONBLOCK);
 }
 
 static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
 {
 	struct video_device *vdev = file->private_data;
-	struct pwc_device *pdev;
-	int ret;
+	struct pwc_device *pdev = video_get_drvdata(vdev);
 
-	if (vdev == NULL)
-		return -EFAULT;
-	pdev = video_get_drvdata(vdev);
-	if (pdev == NULL)
-		return -EFAULT;
+	if (!pdev->udev)
+		return POLL_ERR;
 
-	/* Start the stream (if not already started) */
-	ret = pwc_isoc_init(pdev);
-	if (ret)
-		return ret;
+	return vb2_poll(&pdev->vb_queue, file, wait);
+}
+
+static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = file->private_data;
+	struct pwc_device *pdev = video_get_drvdata(vdev);
+
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_mmap(&pdev->vb_queue, vma);
+}
+
+/***************************************************************************/
+/* Videobuf2 operations */
+
+static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				unsigned int *nplanes, unsigned long sizes[],
+				void *alloc_ctxs[])
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+
+	if (*nbuffers < MIN_FRAMES)
+		*nbuffers = MIN_FRAMES;
+	else if (*nbuffers > MAX_FRAMES)
+		*nbuffers = MAX_FRAMES;
+
+	*nplanes = 1;
 
-	poll_wait(file, &pdev->frameq, wait);
-	if (pdev->error_status)
-		return POLLERR;
-	if (pdev->full_frames != NULL) /* we have frames waiting */
-		return (POLLIN | POLLRDNORM);
+	sizes[0] = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2);
 
 	return 0;
 }
 
-static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma)
+static int buffer_init(struct vb2_buffer *vb)
 {
-	struct video_device *vdev = file->private_data;
-	struct pwc_device *pdev;
-	unsigned long start;
-	unsigned long size;
-	unsigned long page, pos = 0;
-	int index;
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
 
-	PWC_DEBUG_MEMORY(">> %s\n", __func__);
-	pdev = video_get_drvdata(vdev);
-	size = vma->vm_end - vma->vm_start;
-	start = vma->vm_start;
+	/* need vmalloc since frame buffer > 128K */
+	buf->data = vzalloc(PWC_FRAME_SIZE);
+	if (buf->data == NULL)
+		return -ENOMEM;
 
-	/* Find the idx buffer for this mapping */
-	for (index = 0; index < pwc_mbufs; index++) {
-		pos = pdev->images[index].offset;
-		if ((pos>>PAGE_SHIFT) == vma->vm_pgoff)
-			break;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
+
+	/* Don't allow queing new buffers after device disconnection */
+	if (!pdev->udev)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int buffer_finish(struct vb2_buffer *vb)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
+
+	/*
+	 * Application has called dqbuf and is getting back a buffer we've
+	 * filled, take the pwc data we've stored in buf->data and decompress
+	 * it into a usable format, storing the result in the vb2_buffer
+	 */
+	return pwc_decompress(pdev, buf);
+}
+
+static void buffer_cleanup(struct vb2_buffer *vb)
+{
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
+
+	vfree(buf->data);
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
+	struct pwc_frame_buf *buf = container_of(vb, struct pwc_frame_buf, vb);
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&pdev->queued_bufs_lock, flags);
+	list_add_tail(&buf->list, &pdev->queued_bufs);
+	spin_unlock_irqrestore(&pdev->queued_bufs_lock, flags);
+}
+
+static int start_streaming(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+
+	if (!pdev->udev)
+		return -ENODEV;
+
+	/* Turn on camera and set LEDS on */
+	pwc_camera_power(pdev, 1);
+	if (pdev->power_save) {
+		/* Restore video mode */
+		pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y,
+				   pdev->vframes, pdev->vcompression,
+				   pdev->vsnapshot);
 	}
-	if (index == MAX_IMAGES)
-		return -EINVAL;
-	if (index == 0) {
-		/*
-		 * Special case for v4l1. In v4l1, we map only one big buffer,
-		 * but in v4l2 each buffer is mapped
-		 */
-		unsigned long total_size;
-		total_size = pwc_mbufs * pdev->len_per_image;
-		if (size != pdev->len_per_image && size != total_size) {
-			PWC_ERROR("Wrong size (%lu) needed to be len_per_image=%d or total_size=%lu\n",
-				   size, pdev->len_per_image, total_size);
-			return -EINVAL;
-		}
-	} else if (size > pdev->len_per_image)
-		return -EINVAL;
-
-	vma->vm_flags |= VM_IO;	/* from 2.6.9-acX */
-
-	pos += (unsigned long)pdev->image_data;
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED))
-			return -EAGAIN;
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
+	pwc_set_leds(pdev, led_on, led_off);
+
+	return pwc_isoc_init(pdev);
+}
+
+static int stop_streaming(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+
+	if (pdev->udev) {
+		pwc_set_leds(pdev, 0, 0);
+		pwc_camera_power(pdev, 0);
+		pwc_isoc_cleanup(pdev);
 	}
+	pwc_cleanup_queued_bufs(pdev);
+
 	return 0;
 }
 
+static void pwc_lock(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+	mutex_lock(&pdev->modlock);
+}
+
+static void pwc_unlock(struct vb2_queue *vq)
+{
+	struct pwc_device *pdev = vb2_get_drv_priv(vq);
+	mutex_unlock(&pdev->modlock);
+}
+
+static struct vb2_ops pwc_vb_queue_ops = {
+	.queue_setup		= queue_setup,
+	.buf_init		= buffer_init,
+	.buf_prepare		= buffer_prepare,
+	.buf_finish		= buffer_finish,
+	.buf_cleanup		= buffer_cleanup,
+	.buf_queue		= buffer_queue,
+	.start_streaming	= start_streaming,
+	.stop_streaming		= stop_streaming,
+	.wait_prepare		= pwc_unlock,
+	.wait_finish		= pwc_lock,
+};
+
 /***************************************************************************/
 /* USB functions */
 
@@ -1406,6 +890,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	int hint, rc;
 	int features = 0;
 	int video_nr = -1; /* default: use next available device */
+	int my_power_save = power_save;
 	char serial_number[30], *name;
 
 	vendor_id = le16_to_cpu(udev->descriptor.idVendor);
@@ -1513,6 +998,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			PWC_INFO("Logitech QuickCam 4000 Pro USB webcam detected.\n");
 			name = "Logitech QuickCam Pro 4000";
 			type_id = 740; /* CCD sensor */
+			if (my_power_save == -1)
+				my_power_save = 1;
 			break;
 		case 0x08b3:
 			PWC_INFO("Logitech QuickCam Zoom USB webcam detected.\n");
@@ -1523,12 +1010,15 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			PWC_INFO("Logitech QuickCam Zoom (new model) USB webcam detected.\n");
 			name = "Logitech QuickCam Zoom";
 			type_id = 740; /* CCD sensor */
-			power_save = 1;
+			if (my_power_save == -1)
+				my_power_save = 1;
 			break;
 		case 0x08b5:
 			PWC_INFO("Logitech QuickCam Orbit/Sphere USB webcam detected.\n");
 			name = "Logitech QuickCam Orbit";
 			type_id = 740; /* CCD sensor */
+			if (my_power_save == -1)
+				my_power_save = 1;
 			features |= FEATURE_MOTOR_PANTILT;
 			break;
 		case 0x08b6:
@@ -1583,6 +1073,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			PWC_INFO("Creative Labs Webcam 5 detected.\n");
 			name = "Creative Labs Webcam 5";
 			type_id = 730;
+			if (my_power_save == -1)
+				my_power_save = 1;
 			break;
 		case 0x4011:
 			PWC_INFO("Creative Labs Webcam Pro Ex detected.\n");
@@ -1640,6 +1132,9 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	else
 		return -ENODEV; /* Not any of the know types; but the list keeps growing. */
 
+	if (my_power_save == -1)
+		my_power_save = 0;
+
 	memset(serial_number, 0, 30);
 	usb_string(udev, udev->descriptor.iSerialNumber, serial_number, 29);
 	PWC_DEBUG_PROBE("Device serial number is %s\n", serial_number);
@@ -1654,7 +1149,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		return -ENOMEM;
 	}
 	pdev->type = type_id;
-	pdev->vsize = default_size;
 	pdev->vframes = default_fps;
 	strcpy(pdev->serial, serial_number);
 	pdev->features = features;
@@ -1668,13 +1162,26 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 		pdev->angle_range.tilt_min = -3000;
 		pdev->angle_range.tilt_max =  2500;
 	}
+	pwc_construct(pdev); /* set min/max sizes correct */
 
 	mutex_init(&pdev->modlock);
-	spin_lock_init(&pdev->ptrlock);
+	mutex_init(&pdev->udevlock);
+	spin_lock_init(&pdev->queued_bufs_lock);
+	INIT_LIST_HEAD(&pdev->queued_bufs);
 
 	pdev->udev = udev;
-	init_waitqueue_head(&pdev->frameq);
 	pdev->vcompression = pwc_preferred_compression;
+	pdev->power_save = my_power_save;
+
+	/* Init videobuf2 queue structure */
+	memset(&pdev->vb_queue, 0, sizeof(pdev->vb_queue));
+	pdev->vb_queue.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	pdev->vb_queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+	pdev->vb_queue.drv_priv = pdev;
+	pdev->vb_queue.buf_struct_size = sizeof(struct pwc_frame_buf);
+	pdev->vb_queue.ops = &pwc_vb_queue_ops;
+	pdev->vb_queue.mem_ops = &vb2_vmalloc_memops;
+	vb2_queue_init(&pdev->vb_queue);
 
 	/* Init video_device structure */
 	memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template));
@@ -1707,14 +1214,40 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 	PWC_DEBUG_PROBE("probe() function returning struct at 0x%p.\n", pdev);
 	usb_set_intfdata(intf, pdev);
 
+#ifdef CONFIG_USB_PWC_DEBUG
+	/* Query sensor type */
+	if (pwc_get_cmos_sensor(pdev, &rc) >= 0) {
+		PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
+				pdev->vdev.name,
+				pwc_sensor_type_to_string(rc), rc);
+	}
+#endif
+
 	/* Set the leds off */
 	pwc_set_leds(pdev, 0, 0);
+
+	/* Setup intial videomode */
+	rc = pwc_set_video_mode(pdev, pdev->view_max.x, pdev->view_max.y,
+				pdev->vframes, pdev->vcompression, 0);
+	if (rc)
+		goto err_free_mem;
+
+	/* Register controls (and read default values from camera */
+	rc = pwc_init_controls(pdev);
+	if (rc) {
+		PWC_ERROR("Failed to register v4l2 controls (%d).\n", rc);
+		goto err_free_mem;
+	}
+
+	pdev->vdev.ctrl_handler = &pdev->ctrl_handler;
+
+	/* And powerdown the camera until streaming starts */
 	pwc_camera_power(pdev, 0);
 
 	rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
 	if (rc < 0) {
 		PWC_ERROR("Failed to register as video device (%d).\n", rc);
-		goto err_free_mem;
+		goto err_free_controls;
 	}
 	rc = pwc_create_sysfs_files(pdev);
 	if (rc)
@@ -1757,7 +1290,10 @@ err_video_unreg:
 	if (hint < MAX_DEV_HINTS)
 		device_hint[hint].pdev = NULL;
 	video_unregister_device(&pdev->vdev);
+err_free_controls:
+	v4l2_ctrl_handler_free(&pdev->ctrl_handler);
 err_free_mem:
+	usb_set_intfdata(intf, NULL);
 	kfree(pdev);
 	return rc;
 }
@@ -1767,33 +1303,17 @@ static void usb_pwc_disconnect(struct usb_interface *intf)
 {
 	struct pwc_device *pdev  = usb_get_intfdata(intf);
 
+	mutex_lock(&pdev->udevlock);
 	mutex_lock(&pdev->modlock);
-	usb_set_intfdata (intf, NULL);
-	if (pdev == NULL) {
-		PWC_ERROR("pwc_disconnect() Called without private pointer.\n");
-		goto disconnect_out;
-	}
-	if (pdev->udev == NULL) {
-		PWC_ERROR("pwc_disconnect() already called for %p\n", pdev);
-		goto disconnect_out;
-	}
-	if (pdev->udev != interface_to_usbdev(intf)) {
-		PWC_ERROR("pwc_disconnect() Woops: pointer mismatch udev/pdev.\n");
-		goto disconnect_out;
-	}
-
-	/* We got unplugged; this is signalled by an EPIPE error code */
-	pdev->error_status = EPIPE;
-	pdev->unplugged = 1;
-
-	/* Alert waiting processes */
-	wake_up_interruptible(&pdev->frameq);
 
+	usb_set_intfdata(intf, NULL);
 	/* No need to keep the urbs around after disconnection */
 	pwc_isoc_cleanup(pdev);
+	pwc_cleanup_queued_bufs(pdev);
+	pdev->udev = NULL;
 
-disconnect_out:
 	mutex_unlock(&pdev->modlock);
+	mutex_unlock(&pdev->udevlock);
 
 	pwc_remove_sysfs_files(pdev);
 	video_unregister_device(&pdev->vdev);
@@ -1809,36 +1329,27 @@ disconnect_out:
  * Initialization code & module stuff
  */
 
-static char *size;
 static int fps;
-static int fbufs;
-static int mbufs;
 static int compression = -1;
 static int leds[2] = { -1, -1 };
 static unsigned int leds_nargs;
 static char *dev_hint[MAX_DEV_HINTS];
 static unsigned int dev_hint_nargs;
 
-module_param(size, charp, 0444);
 module_param(fps, int, 0444);
-module_param(fbufs, int, 0444);
-module_param(mbufs, int, 0444);
 #ifdef CONFIG_USB_PWC_DEBUG
 module_param_named(trace, pwc_trace, int, 0644);
 #endif
-module_param(power_save, int, 0444);
+module_param(power_save, int, 0644);
 module_param(compression, int, 0444);
 module_param_array(leds, int, &leds_nargs, 0444);
 module_param_array(dev_hint, charp, &dev_hint_nargs, 0444);
 
-MODULE_PARM_DESC(size, "Initial image size. One of sqcif, qsif, qcif, sif, cif, vga");
 MODULE_PARM_DESC(fps, "Initial frames per second. Varies with model, useful range 5-30");
-MODULE_PARM_DESC(fbufs, "Number of internal frame buffers to reserve");
-MODULE_PARM_DESC(mbufs, "Number of external (mmap()ed) image buffers");
 #ifdef CONFIG_USB_PWC_DEBUG
 MODULE_PARM_DESC(trace, "For debugging purposes");
 #endif
-MODULE_PARM_DESC(power_save, "Turn power save feature in camera on or off");
+MODULE_PARM_DESC(power_save, "Turn power saving for new cameras on or off");
 MODULE_PARM_DESC(compression, "Preferred compression quality. Range 0 (uncompressed) to 3 (high compression)");
 MODULE_PARM_DESC(leds, "LED on,off time in milliseconds");
 MODULE_PARM_DESC(dev_hint, "Device node hints");
@@ -1851,14 +1362,19 @@ MODULE_VERSION( PWC_VERSION );
 
 static int __init usb_pwc_init(void)
 {
-	int i, sz;
-	char *sizenames[PSZ_MAX] = { "sqcif", "qsif", "qcif", "sif", "cif", "vga" };
+	int i;
 
+#ifdef CONFIG_USB_PWC_DEBUG
 	PWC_INFO("Philips webcam module version " PWC_VERSION " loaded.\n");
 	PWC_INFO("Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.\n");
 	PWC_INFO("Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,\n");
 	PWC_INFO("the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.\n");
 
+	if (pwc_trace >= 0) {
+		PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace);
+	}
+#endif
+
 	if (fps) {
 		if (fps < 4 || fps > 30) {
 			PWC_ERROR("Framerate out of bounds (4-30).\n");
@@ -1868,41 +1384,6 @@ static int __init usb_pwc_init(void)
 		PWC_DEBUG_MODULE("Default framerate set to %d.\n", default_fps);
 	}
 
-	if (size) {
-		/* string; try matching with array */
-		for (sz = 0; sz < PSZ_MAX; sz++) {
-			if (!strcmp(sizenames[sz], size)) { /* Found! */
-				default_size = sz;
-				break;
-			}
-		}
-		if (sz == PSZ_MAX) {
-			PWC_ERROR("Size not recognized; try size=[sqcif | qsif | qcif | sif | cif | vga].\n");
-			return -EINVAL;
-		}
-		PWC_DEBUG_MODULE("Default image size set to %s [%dx%d].\n", sizenames[default_size], pwc_image_sizes[default_size].x, pwc_image_sizes[default_size].y);
-	}
-	if (mbufs) {
-		if (mbufs < 1 || mbufs > MAX_IMAGES) {
-			PWC_ERROR("Illegal number of mmap() buffers; use a number between 1 and %d.\n", MAX_IMAGES);
-			return -EINVAL;
-		}
-		pwc_mbufs = mbufs;
-		PWC_DEBUG_MODULE("Number of image buffers set to %d.\n", pwc_mbufs);
-	}
-	if (fbufs) {
-		if (fbufs < 2 || fbufs > MAX_FRAMES) {
-			PWC_ERROR("Illegal number of frame buffers; use a number between 2 and %d.\n", MAX_FRAMES);
-			return -EINVAL;
-		}
-		default_fbufs = fbufs;
-		PWC_DEBUG_MODULE("Number of frame buffers set to %d.\n", default_fbufs);
-	}
-#ifdef CONFIG_USB_PWC_DEBUG
-	if (pwc_trace >= 0) {
-		PWC_DEBUG_MODULE("Trace options: 0x%04x\n", pwc_trace);
-	}
-#endif
 	if (compression >= 0) {
 		if (compression > 3) {
 			PWC_ERROR("Invalid compression setting; use a number between 0 (uncompressed) and 3 (high).\n");
@@ -1911,8 +1392,6 @@ static int __init usb_pwc_init(void)
 		pwc_preferred_compression = compression;
 		PWC_DEBUG_MODULE("Preferred compression set to %d.\n", pwc_preferred_compression);
 	}
-	if (power_save)
-		PWC_DEBUG_MODULE("Enabling power save on open/close.\n");
 	if (leds[0] >= 0)
 		led_on = leds[0];
 	if (leds[1] >= 0)
diff --git a/drivers/media/video/pwc/pwc-ioctl.h b/drivers/media/video/pwc/pwc-ioctl.h
deleted file mode 100644
index 8c0cae7b3da..00000000000
--- a/drivers/media/video/pwc/pwc-ioctl.h
+++ /dev/null
@@ -1,323 +0,0 @@
-#ifndef PWC_IOCTL_H
-#define PWC_IOCTL_H
-
-/* (C) 2001-2004 Nemosoft Unv.
-   (C) 2004-2006 Luc Saillard (luc@saillard.org)
-
-   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
-   driver and thus may have bugs that are not present in the original version.
-   Please send bug reports and support requests to <luc@saillard.org>.
-   The decompression routines have been implemented by reverse-engineering the
-   Nemosoft binary pwcx module. Caveat emptor.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-/* This is pwc-ioctl.h belonging to PWC 10.0.10
-   It contains structures and defines to communicate from user space
-   directly to the driver.
- */
-
-/*
-   Changes
-   2001/08/03  Alvarado   Added ioctl constants to access methods for
-			  changing white balance and red/blue gains
-   2002/12/15  G. H. Fernandez-Toribio   VIDIOCGREALSIZE
-   2003/12/13  Nemosft Unv. Some modifications to make interfacing to
-	       PWCX easier
- */
-
-/* These are private ioctl() commands, specific for the Philips webcams.
-   They contain functions not found in other webcams, and settings not
-   specified in the Video4Linux API.
-
-   The #define names are built up like follows:
-   VIDIOC		VIDeo IOCtl prefix
-	 PWC		Philps WebCam
-	    G           optional: Get
-	    S           optional: Set
-	     ... 	the function
- */
-
-#include <linux/types.h>
-#include <linux/version.h>
-
- /* Enumeration of image sizes */
-#define PSZ_SQCIF	0x00
-#define PSZ_QSIF	0x01
-#define PSZ_QCIF	0x02
-#define PSZ_SIF		0x03
-#define PSZ_CIF		0x04
-#define PSZ_VGA		0x05
-#define PSZ_MAX		6
-
-
-/* The frame rate is encoded in the video_window.flags parameter using
-   the upper 16 bits, since some flags are defined nowadays. The following
-   defines provide a mask and shift to filter out this value.
-   This value can also be passing using the private flag when using v4l2 and
-   VIDIOC_S_FMT ioctl.
-
-   In 'Snapshot' mode the camera freezes its automatic exposure and colour
-   balance controls.
- */
-#define PWC_FPS_SHIFT		16
-#define PWC_FPS_MASK		0x00FF0000
-#define PWC_FPS_FRMASK		0x003F0000
-#define PWC_FPS_SNAPSHOT	0x00400000
-#define PWC_QLT_MASK		0x03000000
-#define PWC_QLT_SHIFT		24
-
-
-/* structure for transferring x & y coordinates */
-struct pwc_coord
-{
-	int x, y;		/* guess what */
-	int size;		/* size, or offset */
-};
-
-
-/* Used with VIDIOCPWCPROBE */
-struct pwc_probe
-{
-	char name[32];
-	int type;
-};
-
-struct pwc_serial
-{
-	char serial[30];	/* String with serial number. Contains terminating 0 */
-};
-
-/* pwc_whitebalance.mode values */
-#define PWC_WB_INDOOR		0
-#define PWC_WB_OUTDOOR		1
-#define PWC_WB_FL		2
-#define PWC_WB_MANUAL		3
-#define PWC_WB_AUTO		4
-
-/* Used with VIDIOCPWC[SG]AWB (Auto White Balance).
-   Set mode to one of the PWC_WB_* values above.
-   *red and *blue are the respective gains of these colour components inside
-   the camera; range 0..65535
-   When 'mode' == PWC_WB_MANUAL, 'manual_red' and 'manual_blue' are set or read;
-   otherwise undefined.
-   'read_red' and 'read_blue' are read-only.
-*/
-struct pwc_whitebalance
-{
-	int mode;
-	int manual_red, manual_blue;	/* R/W */
-	int read_red, read_blue;	/* R/O */
-};
-
-/*
-   'control_speed' and 'control_delay' are used in automatic whitebalance mode,
-   and tell the camera how fast it should react to changes in lighting, and
-   with how much delay. Valid values are 0..65535.
-*/
-struct pwc_wb_speed
-{
-	int control_speed;
-	int control_delay;
-
-};
-
-/* Used with VIDIOCPWC[SG]LED */
-struct pwc_leds
-{
-	int led_on;			/* Led on-time; range = 0..25000 */
-	int led_off;			/* Led off-time; range = 0..25000  */
-};
-
-/* Image size (used with GREALSIZE) */
-struct pwc_imagesize
-{
-	int width;
-	int height;
-};
-
-/* Defines and structures for Motorized Pan & Tilt */
-#define PWC_MPT_PAN		0x01
-#define PWC_MPT_TILT		0x02
-#define PWC_MPT_TIMEOUT		0x04 /* for status */
-
-/* Set angles; when absolute != 0, the angle is absolute and the
-   driver calculates the relative offset for you. This can only
-   be used with VIDIOCPWCSANGLE; VIDIOCPWCGANGLE always returns
-   absolute angles.
- */
-struct pwc_mpt_angles
-{
-	int absolute;		/* write-only */
-	int pan;		/* degrees * 100 */
-	int tilt;		/* degress * 100 */
-};
-
-/* Range of angles of the camera, both horizontally and vertically.
- */
-struct pwc_mpt_range
-{
-	int pan_min, pan_max;		/* degrees * 100 */
-	int tilt_min, tilt_max;
-};
-
-struct pwc_mpt_status
-{
-	int status;
-	int time_pan;
-	int time_tilt;
-};
-
-
-/* This is used for out-of-kernel decompression. With it, you can get
-   all the necessary information to initialize and use the decompressor
-   routines in standalone applications.
- */
-struct pwc_video_command
-{
-	int type;		/* camera type (645, 675, 730, etc.) */
-	int release;		/* release number */
-
-	int size;		/* one of PSZ_* */
-	int alternate;
-	int command_len;	/* length of USB video command */
-	unsigned char command_buf[13];	/* Actual USB video command */
-	int bandlength;		/* >0 = compressed */
-	int frame_size;		/* Size of one (un)compressed frame */
-};
-
-/* Flags for PWCX subroutines. Not all modules honour all flags. */
-#define PWCX_FLAG_PLANAR	0x0001
-#define PWCX_FLAG_BAYER		0x0008
-
-
-/* IOCTL definitions */
-
- /* Restore user settings */
-#define VIDIOCPWCRUSER		_IO('v', 192)
- /* Save user settings */
-#define VIDIOCPWCSUSER		_IO('v', 193)
- /* Restore factory settings */
-#define VIDIOCPWCFACTORY	_IO('v', 194)
-
- /* You can manipulate the compression factor. A compression preference of 0
-    means use uncompressed modes when available; 1 is low compression, 2 is
-    medium and 3 is high compression preferred. Of course, the higher the
-    compression, the lower the bandwidth used but more chance of artefacts
-    in the image. The driver automatically chooses a higher compression when
-    the preferred mode is not available.
-  */
- /* Set preferred compression quality (0 = uncompressed, 3 = highest compression) */
-#define VIDIOCPWCSCQUAL		_IOW('v', 195, int)
- /* Get preferred compression quality */
-#define VIDIOCPWCGCQUAL		_IOR('v', 195, int)
-
-
-/* Retrieve serial number of camera */
-#define VIDIOCPWCGSERIAL	_IOR('v', 198, struct pwc_serial)
-
- /* This is a probe function; since so many devices are supported, it
-    becomes difficult to include all the names in programs that want to
-    check for the enhanced Philips stuff. So in stead, try this PROBE;
-    it returns a structure with the original name, and the corresponding
-    Philips type.
-    To use, fill the structure with zeroes, call PROBE and if that succeeds,
-    compare the name with that returned from VIDIOCGCAP; they should be the
-    same. If so, you can be assured it is a Philips (OEM) cam and the type
-    is valid.
- */
-#define VIDIOCPWCPROBE		_IOR('v', 199, struct pwc_probe)
-
- /* Set AGC (Automatic Gain Control); int < 0 = auto, 0..65535 = fixed */
-#define VIDIOCPWCSAGC		_IOW('v', 200, int)
- /* Get AGC; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCGAGC		_IOR('v', 200, int)
- /* Set shutter speed; int < 0 = auto; >= 0 = fixed, range 0..65535 */
-#define VIDIOCPWCSSHUTTER	_IOW('v', 201, int)
-
- /* Color compensation (Auto White Balance) */
-#define VIDIOCPWCSAWB           _IOW('v', 202, struct pwc_whitebalance)
-#define VIDIOCPWCGAWB           _IOR('v', 202, struct pwc_whitebalance)
-
- /* Auto WB speed */
-#define VIDIOCPWCSAWBSPEED	_IOW('v', 203, struct pwc_wb_speed)
-#define VIDIOCPWCGAWBSPEED	_IOR('v', 203, struct pwc_wb_speed)
-
- /* LEDs on/off/blink; int range 0..65535 */
-#define VIDIOCPWCSLED           _IOW('v', 205, struct pwc_leds)
-#define VIDIOCPWCGLED           _IOR('v', 205, struct pwc_leds)
-
-  /* Contour (sharpness); int < 0 = auto, 0..65536 = fixed */
-#define VIDIOCPWCSCONTOUR	_IOW('v', 206, int)
-#define VIDIOCPWCGCONTOUR	_IOR('v', 206, int)
-
-  /* Backlight compensation; 0 = off, otherwise on */
-#define VIDIOCPWCSBACKLIGHT	_IOW('v', 207, int)
-#define VIDIOCPWCGBACKLIGHT	_IOR('v', 207, int)
-
-  /* Flickerless mode; = 0 off, otherwise on */
-#define VIDIOCPWCSFLICKER	_IOW('v', 208, int)
-#define VIDIOCPWCGFLICKER	_IOR('v', 208, int)
-
-  /* Dynamic noise reduction; 0 off, 3 = high noise reduction */
-#define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
-#define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
-
- /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
-#define VIDIOCPWCGREALSIZE	_IOR('v', 210, struct pwc_imagesize)
-
- /* Motorized pan & tilt functions */
-#define VIDIOCPWCMPTRESET	_IOW('v', 211, int)
-#define VIDIOCPWCMPTGRANGE	_IOR('v', 211, struct pwc_mpt_range)
-#define VIDIOCPWCMPTSANGLE	_IOW('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTGANGLE	_IOR('v', 212, struct pwc_mpt_angles)
-#define VIDIOCPWCMPTSTATUS	_IOR('v', 213, struct pwc_mpt_status)
-
- /* Get the USB set-video command; needed for initializing libpwcx */
-#define VIDIOCPWCGVIDCMD	_IOR('v', 215, struct pwc_video_command)
-struct pwc_table_init_buffer {
-   int len;
-   char *buffer;
-
-};
-#define VIDIOCPWCGVIDTABLE	_IOR('v', 216, struct pwc_table_init_buffer)
-
-/*
- * This is private command used when communicating with v4l2.
- * In the future all private ioctl will be remove/replace to
- * use interface offer by v4l2.
- */
-
-#define V4L2_CID_PRIVATE_SAVE_USER       (V4L2_CID_PRIVATE_BASE + 0)
-#define V4L2_CID_PRIVATE_RESTORE_USER    (V4L2_CID_PRIVATE_BASE + 1)
-#define V4L2_CID_PRIVATE_RESTORE_FACTORY (V4L2_CID_PRIVATE_BASE + 2)
-#define V4L2_CID_PRIVATE_COLOUR_MODE     (V4L2_CID_PRIVATE_BASE + 3)
-#define V4L2_CID_PRIVATE_AUTOCONTOUR     (V4L2_CID_PRIVATE_BASE + 4)
-#define V4L2_CID_PRIVATE_CONTOUR         (V4L2_CID_PRIVATE_BASE + 5)
-#define V4L2_CID_PRIVATE_BACKLIGHT       (V4L2_CID_PRIVATE_BASE + 6)
-#define V4L2_CID_PRIVATE_FLICKERLESS     (V4L2_CID_PRIVATE_BASE + 7)
-#define V4L2_CID_PRIVATE_NOISE_REDUCTION (V4L2_CID_PRIVATE_BASE + 8)
-
-struct pwc_raw_frame {
-   __le16 type;		/* type of the webcam */
-   __le16 vbandlength;	/* Size of 4lines compressed (used by the decompressor) */
-   __u8   cmd[4];	/* the four byte of the command (in case of nala,
-			   only the first 3 bytes is filled) */
-   __u8   rawframe[0];	/* frame_size = H/4*vbandlength */
-} __attribute__ ((packed));
-
-
-#endif
diff --git a/drivers/media/video/pwc/pwc-kiara.c b/drivers/media/video/pwc/pwc-kiara.c
index f4ae83c0cf2..e5f4fd81712 100644
--- a/drivers/media/video/pwc/pwc-kiara.c
+++ b/drivers/media/video/pwc/pwc-kiara.c
@@ -40,7 +40,6 @@
 
 
 #include "pwc-kiara.h"
-#include "pwc-uncompress.h"
 
 const unsigned int Kiara_fps_vector[PWC_FPS_MAX_KIARA] = { 5, 10, 15, 20, 25, 30 };
 
diff --git a/drivers/media/video/pwc/pwc-misc.c b/drivers/media/video/pwc/pwc-misc.c
index 6af5bb53835..0b031336eab 100644
--- a/drivers/media/video/pwc/pwc-misc.c
+++ b/drivers/media/video/pwc/pwc-misc.c
@@ -126,8 +126,4 @@ void pwc_construct(struct pwc_device *pdev)
 	pdev->pixfmt = V4L2_PIX_FMT_YUV420; /* default */
 	pdev->view_min.size = pdev->view_min.x * pdev->view_min.y;
 	pdev->view_max.size = pdev->view_max.x * pdev->view_max.y;
-	/* length of image, in YUV format; always allocate enough memory. */
-	pdev->len_per_image = PAGE_ALIGN((pdev->abs_max.x * pdev->abs_max.y * 3) / 2);
 }
-
-
diff --git a/drivers/media/video/pwc/pwc-uncompress.c b/drivers/media/video/pwc/pwc-uncompress.c
index 3b73f295f03..51265092bd3 100644
--- a/drivers/media/video/pwc/pwc-uncompress.c
+++ b/drivers/media/video/pwc/pwc-uncompress.c
@@ -30,26 +30,17 @@
 #include <asm/types.h>
 
 #include "pwc.h"
-#include "pwc-uncompress.h"
 #include "pwc-dec1.h"
 #include "pwc-dec23.h"
 
-int pwc_decompress(struct pwc_device *pdev)
+int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf)
 {
-	struct pwc_frame_buf *fbuf;
 	int n, line, col, stride;
 	void *yuv, *image;
 	u16 *src;
 	u16 *dsty, *dstu, *dstv;
 
-	if (pdev == NULL)
-		return -EFAULT;
-
-	fbuf = pdev->read_frame;
-	if (fbuf == NULL)
-		return -EFAULT;
-	image  = pdev->image_data;
-	image += pdev->images[pdev->fill_image].offset;
+	image = vb2_plane_vaddr(&fbuf->vb, 0);
 
 	yuv = fbuf->data + pdev->frame_header_size;  /* Skip header */
 
@@ -64,9 +55,13 @@ int pwc_decompress(struct pwc_device *pdev)
 			 * determine this using the type of the webcam */
 		memcpy(raw_frame->cmd, pdev->cmd_buf, 4);
 		memcpy(raw_frame+1, yuv, pdev->frame_size);
+		vb2_set_plane_payload(&fbuf->vb, 0,
+			pdev->frame_size + sizeof(struct pwc_raw_frame));
 		return 0;
 	}
 
+	vb2_set_plane_payload(&fbuf->vb, 0, pdev->view.size);
+
 	if (pdev->vbandlength == 0) {
 		/* Uncompressed mode.
 		 * We copy the data into the output buffer, using the viewport
diff --git a/drivers/media/video/pwc/pwc-uncompress.h b/drivers/media/video/pwc/pwc-uncompress.h
deleted file mode 100644
index 43028e74e9e..00000000000
--- a/drivers/media/video/pwc/pwc-uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* (C) 1999-2003 Nemosoft Unv.
-   (C) 2004-2006 Luc Saillard (luc@saillard.org)
-
-   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
-   driver and thus may have bugs that are not present in the original version.
-   Please send bug reports and support requests to <luc@saillard.org>.
-   The decompression routines have been implemented by reverse-engineering the
-   Nemosoft binary pwcx module. Caveat emptor.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-/* This file is the bridge between the kernel module and the plugin; it
-   describes the structures and datatypes used in both modules. Any
-   significant change should be reflected by increasing the
-   pwc_decompressor_version major number.
- */
-#ifndef PWC_UNCOMPRESS_H
-#define PWC_UNCOMPRESS_H
-
-
-#include <media/pwc-ioctl.h>
-
-/* from pwc-dec.h */
-#define PWCX_FLAG_PLANAR        0x0001
-/* */
-
-#endif
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index f85c51249c7..e9a0e94b999 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -2,6 +2,7 @@
    USB and Video4Linux interface part.
    (C) 1999-2004 Nemosoft Unv.
    (C) 2004-2006 Luc Saillard (luc@saillard.org)
+   (C) 2011 Hans de Goede <hdegoede@redhat.com>
 
    NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
    driver and thus may have bugs that are not present in the original version.
@@ -31,184 +32,330 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/vmalloc.h>
+#include <linux/jiffies.h>
 #include <asm/io.h>
 
 #include "pwc.h"
 
-static struct v4l2_queryctrl pwc_controls[] = {
-	{
-	    .id      = V4L2_CID_BRIGHTNESS,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Brightness",
-	    .minimum = 0,
-	    .maximum = 128,
-	    .step    = 1,
-	    .default_value = 64,
-	},
-	{
-	    .id      = V4L2_CID_CONTRAST,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Contrast",
-	    .minimum = 0,
-	    .maximum = 64,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_SATURATION,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Saturation",
-	    .minimum = -100,
-	    .maximum = 100,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_GAMMA,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Gamma",
-	    .minimum = 0,
-	    .maximum = 32,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_RED_BALANCE,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Red Gain",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_BLUE_BALANCE,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Blue Gain",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_AUTO_WHITE_BALANCE,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Auto White Balance",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_EXPOSURE,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Shutter Speed (Exposure)",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 200,
-	},
-	{
-	    .id      = V4L2_CID_AUTOGAIN,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Auto Gain Enabled",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 1,
-	},
-	{
-	    .id      = V4L2_CID_GAIN,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Gain Level",
-	    .minimum = 0,
-	    .maximum = 256,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_SAVE_USER,
-	    .type    = V4L2_CTRL_TYPE_BUTTON,
-	    .name    = "Save User Settings",
-	    .minimum = 0,
-	    .maximum = 0,
-	    .step    = 0,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_RESTORE_USER,
-	    .type    = V4L2_CTRL_TYPE_BUTTON,
-	    .name    = "Restore User Settings",
-	    .minimum = 0,
-	    .maximum = 0,
-	    .step    = 0,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_RESTORE_FACTORY,
-	    .type    = V4L2_CTRL_TYPE_BUTTON,
-	    .name    = "Restore Factory Settings",
-	    .minimum = 0,
-	    .maximum = 0,
-	    .step    = 0,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_COLOUR_MODE,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Colour mode",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_AUTOCONTOUR,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Auto contour",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_CONTOUR,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Contour",
-	    .minimum = 0,
-	    .maximum = 63,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_BACKLIGHT,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Backlight compensation",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	  .id      = V4L2_CID_PRIVATE_FLICKERLESS,
-	    .type    = V4L2_CTRL_TYPE_BOOLEAN,
-	    .name    = "Flickerless",
-	    .minimum = 0,
-	    .maximum = 1,
-	    .step    = 1,
-	    .default_value = 0,
-	},
-	{
-	    .id      = V4L2_CID_PRIVATE_NOISE_REDUCTION,
-	    .type    = V4L2_CTRL_TYPE_INTEGER,
-	    .name    = "Noise reduction",
-	    .minimum = 0,
-	    .maximum = 3,
-	    .step    = 1,
-	    .default_value = 0,
-	},
+#define PWC_CID_CUSTOM(ctrl) ((V4L2_CID_USER_BASE | 0xf000) + custom_ ## ctrl)
+
+static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl);
+static int pwc_s_ctrl(struct v4l2_ctrl *ctrl);
+
+static const struct v4l2_ctrl_ops pwc_ctrl_ops = {
+	.g_volatile_ctrl = pwc_g_volatile_ctrl,
+	.s_ctrl = pwc_s_ctrl,
+};
+
+enum { awb_indoor, awb_outdoor, awb_fl, awb_manual, awb_auto };
+enum { custom_autocontour, custom_contour, custom_noise_reduction,
+	custom_save_user, custom_restore_user, custom_restore_factory };
+
+const char * const pwc_auto_whitebal_qmenu[] = {
+	"Indoor (Incandescant Lighting) Mode",
+	"Outdoor (Sunlight) Mode",
+	"Indoor (Fluorescent Lighting) Mode",
+	"Manual Mode",
+	"Auto Mode",
+	NULL
+};
+
+static const struct v4l2_ctrl_config pwc_auto_white_balance_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= V4L2_CID_AUTO_WHITE_BALANCE,
+	.type	= V4L2_CTRL_TYPE_MENU,
+	.max	= awb_auto,
+	.qmenu	= pwc_auto_whitebal_qmenu,
+};
+
+static const struct v4l2_ctrl_config pwc_autocontour_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(autocontour),
+	.type	= V4L2_CTRL_TYPE_BOOLEAN,
+	.name	= "Auto contour",
+	.min	= 0,
+	.max	= 1,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_contour_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(contour),
+	.type	= V4L2_CTRL_TYPE_INTEGER,
+	.name	= "Contour",
+	.min	= 0,
+	.max	= 63,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_backlight_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= V4L2_CID_BACKLIGHT_COMPENSATION,
+	.type	= V4L2_CTRL_TYPE_BOOLEAN,
+	.min	= 0,
+	.max	= 1,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_flicker_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= V4L2_CID_BAND_STOP_FILTER,
+	.type	= V4L2_CTRL_TYPE_BOOLEAN,
+	.min	= 0,
+	.max	= 1,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_noise_reduction_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(noise_reduction),
+	.type	= V4L2_CTRL_TYPE_INTEGER,
+	.name	= "Dynamic Noise Reduction",
+	.min	= 0,
+	.max	= 3,
+	.step	= 1,
+};
+
+static const struct v4l2_ctrl_config pwc_save_user_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(save_user),
+	.type	= V4L2_CTRL_TYPE_BUTTON,
+	.name    = "Save User Settings",
 };
 
+static const struct v4l2_ctrl_config pwc_restore_user_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(restore_user),
+	.type	= V4L2_CTRL_TYPE_BUTTON,
+	.name    = "Restore User Settings",
+};
+
+static const struct v4l2_ctrl_config pwc_restore_factory_cfg = {
+	.ops	= &pwc_ctrl_ops,
+	.id	= PWC_CID_CUSTOM(restore_factory),
+	.type	= V4L2_CTRL_TYPE_BUTTON,
+	.name    = "Restore Factory Settings",
+};
+
+int pwc_init_controls(struct pwc_device *pdev)
+{
+	struct v4l2_ctrl_handler *hdl;
+	struct v4l2_ctrl_config cfg;
+	int r, def;
+
+	hdl = &pdev->ctrl_handler;
+	r = v4l2_ctrl_handler_init(hdl, 20);
+	if (r)
+		return r;
+
+	/* Brightness, contrast, saturation, gamma */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, BRIGHTNESS_FORMATTER, &def);
+	if (r || def > 127)
+		def = 63;
+	pdev->brightness = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_BRIGHTNESS, 0, 127, 1, def);
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, CONTRAST_FORMATTER, &def);
+	if (r || def > 63)
+		def = 31;
+	pdev->contrast = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_CONTRAST, 0, 63, 1, def);
+
+	if (pdev->type >= 675) {
+		if (pdev->type < 730)
+			pdev->saturation_fmt = SATURATION_MODE_FORMATTER2;
+		else
+			pdev->saturation_fmt = SATURATION_MODE_FORMATTER1;
+		r = pwc_get_s8_ctrl(pdev, GET_CHROM_CTL, pdev->saturation_fmt,
+				    &def);
+		if (r || def < -100 || def > 100)
+			def = 0;
+		pdev->saturation = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				      V4L2_CID_SATURATION, -100, 100, 1, def);
+	}
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, GAMMA_FORMATTER, &def);
+	if (r || def > 31)
+		def = 15;
+	pdev->gamma = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_GAMMA, 0, 31, 1, def);
+
+	/* auto white balance, red gain, blue gain */
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, WB_MODE_FORMATTER, &def);
+	if (r || def > awb_auto)
+		def = awb_auto;
+	cfg = pwc_auto_white_balance_cfg;
+	cfg.name = v4l2_ctrl_get_name(cfg.id);
+	cfg.def = def;
+	pdev->auto_white_balance = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+	/* check auto controls to avoid NULL deref in v4l2_ctrl_auto_cluster */
+	if (!pdev->auto_white_balance)
+		return hdl->error;
+
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL,
+			    PRESET_MANUAL_RED_GAIN_FORMATTER, &def);
+	if (r)
+		def = 127;
+	pdev->red_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_RED_BALANCE, 0, 255, 1, def);
+
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL,
+			    PRESET_MANUAL_BLUE_GAIN_FORMATTER, &def);
+	if (r)
+		def = 127;
+	pdev->blue_balance = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_BLUE_BALANCE, 0, 255, 1, def);
+
+	v4l2_ctrl_auto_cluster(3, &pdev->auto_white_balance, awb_manual,
+			       pdev->auto_white_balance->cur.val == awb_auto);
+
+	/* autogain, gain */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AGC_MODE_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	/* Note a register value if 0 means auto gain is on */
+	pdev->autogain = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_AUTOGAIN, 0, 1, 1, def == 0);
+	if (!pdev->autogain)
+		return hdl->error;
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, PRESET_AGC_FORMATTER, &def);
+	if (r || def > 63)
+		def = 31;
+	pdev->gain = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_GAIN, 0, 63, 1, def);
+
+	/* auto exposure, exposure */
+	if (DEVICE_USE_CODEC2(pdev->type)) {
+		r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, SHUTTER_MODE_FORMATTER,
+				    &def);
+		if (r || (def != 0 && def != 0xff))
+			def = 0;
+		/*
+		 * def = 0 auto, def = ff manual
+		 * menu idx 0 = auto, idx 1 = manual
+		 */
+		pdev->exposure_auto = v4l2_ctrl_new_std_menu(hdl,
+					&pwc_ctrl_ops,
+					V4L2_CID_EXPOSURE_AUTO,
+					1, 0, def != 0);
+		if (!pdev->exposure_auto)
+			return hdl->error;
+
+		/* GET_LUM_CTL, PRESET_SHUTTER_FORMATTER is unreliable */
+		r = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+				     READ_SHUTTER_FORMATTER, &def);
+		if (r || def > 655)
+			def = 655;
+		pdev->exposure = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+					V4L2_CID_EXPOSURE, 0, 655, 1, def);
+		/* CODEC2: separate auto gain & auto exposure */
+		v4l2_ctrl_auto_cluster(2, &pdev->autogain, 0, true);
+		v4l2_ctrl_auto_cluster(2, &pdev->exposure_auto,
+				       V4L2_EXPOSURE_MANUAL, true);
+	} else if (DEVICE_USE_CODEC3(pdev->type)) {
+		/* GET_LUM_CTL, PRESET_SHUTTER_FORMATTER is unreliable */
+		r = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+				     READ_SHUTTER_FORMATTER, &def);
+		if (r || def > 255)
+			def = 255;
+		pdev->exposure = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+					V4L2_CID_EXPOSURE, 0, 255, 1, def);
+		/* CODEC3: both gain and exposure controlled by autogain */
+		pdev->autogain_expo_cluster[0] = pdev->autogain;
+		pdev->autogain_expo_cluster[1] = pdev->gain;
+		pdev->autogain_expo_cluster[2] = pdev->exposure;
+		v4l2_ctrl_auto_cluster(3, pdev->autogain_expo_cluster,
+				       0, true);
+	}
+
+	/* color / bw setting */
+	r = pwc_get_u8_ctrl(pdev, GET_CHROM_CTL, COLOUR_MODE_FORMATTER,
+			 &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0xff;
+	/* def = 0 bw, def = ff color, menu idx 0 = color, idx 1 = bw */
+	pdev->colorfx = v4l2_ctrl_new_std_menu(hdl, &pwc_ctrl_ops,
+				V4L2_CID_COLORFX, 1, 0, def == 0);
+
+	/* autocontour, contour */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	cfg = pwc_autocontour_cfg;
+	cfg.def = def == 0;
+	pdev->autocontour = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+	if (!pdev->autocontour)
+		return hdl->error;
+
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &def);
+	if (r || def > 63)
+		def = 31;
+	cfg = pwc_contour_cfg;
+	cfg.def = def;
+	pdev->contour = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	v4l2_ctrl_auto_cluster(2, &pdev->autocontour, 0, false);
+
+	/* backlight */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL,
+			    BACK_LIGHT_COMPENSATION_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	cfg = pwc_backlight_cfg;
+	cfg.name = v4l2_ctrl_get_name(cfg.id);
+	cfg.def = def == 0;
+	pdev->backlight = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	/* flikker rediction */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL,
+			    FLICKERLESS_MODE_FORMATTER, &def);
+	if (r || (def != 0 && def != 0xff))
+		def = 0;
+	cfg = pwc_flicker_cfg;
+	cfg.name = v4l2_ctrl_get_name(cfg.id);
+	cfg.def = def == 0;
+	pdev->flicker = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	/* Dynamic noise reduction */
+	r = pwc_get_u8_ctrl(pdev, GET_LUM_CTL,
+			    DYNAMIC_NOISE_CONTROL_FORMATTER, &def);
+	if (r || def > 3)
+		def = 2;
+	cfg = pwc_noise_reduction_cfg;
+	cfg.def = def;
+	pdev->noise_reduction = v4l2_ctrl_new_custom(hdl, &cfg, NULL);
+
+	/* Save / Restore User / Factory Settings */
+	pdev->save_user = v4l2_ctrl_new_custom(hdl, &pwc_save_user_cfg, NULL);
+	pdev->restore_user = v4l2_ctrl_new_custom(hdl, &pwc_restore_user_cfg,
+						  NULL);
+	if (pdev->restore_user)
+		pdev->restore_user->flags = V4L2_CTRL_FLAG_UPDATE;
+	pdev->restore_factory = v4l2_ctrl_new_custom(hdl,
+						     &pwc_restore_factory_cfg,
+						     NULL);
+	if (pdev->restore_factory)
+		pdev->restore_factory->flags = V4L2_CTRL_FLAG_UPDATE;
+
+	if (!pdev->features & FEATURE_MOTOR_PANTILT)
+		return hdl->error;
+
+	/* Motor pan / tilt / reset */
+	pdev->motor_pan = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_PAN_RELATIVE, -4480, 4480, 64, 0);
+	if (!pdev->motor_pan)
+		return hdl->error;
+	pdev->motor_tilt = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_TILT_RELATIVE, -1920, 1920, 64, 0);
+	pdev->motor_pan_reset = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_PAN_RESET, 0, 0, 0, 0);
+	pdev->motor_tilt_reset = v4l2_ctrl_new_std(hdl, &pwc_ctrl_ops,
+				V4L2_CID_TILT_RESET, 0, 0, 0, 0);
+	v4l2_ctrl_cluster(4, &pdev->motor_pan);
+
+	return hdl->error;
+}
 
 static void pwc_vidioc_fill_fmt(const struct pwc_device *pdev, struct v4l2_format *f)
 {
@@ -284,10 +431,21 @@ static int pwc_vidioc_try_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 }
 
 /* ioctl(VIDIOC_SET_FMT) */
-static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
+
+static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
 {
+	struct pwc_device *pdev = video_drvdata(file);
 	int ret, fps, snapshot, compression, pixelformat;
 
+	if (!pdev->udev)
+		return -ENODEV;
+
+	if (pdev->capt_file != NULL &&
+	    pdev->capt_file != file)
+		return -EBUSY;
+
+	pdev->capt_file = file;
+
 	ret = pwc_vidioc_try_fmt(pdev, f);
 	if (ret<0)
 		return ret;
@@ -309,7 +467,7 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 	    pixelformat != V4L2_PIX_FMT_PWC2)
 		return -EINVAL;
 
-	if (pdev->iso_init)
+	if (vb2_is_streaming(&pdev->vb_queue))
 		return -EBUSY;
 
 	PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d "
@@ -343,13 +501,14 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 
 static int pwc_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
 {
-	struct video_device *vdev = video_devdata(file);
 	struct pwc_device *pdev = video_drvdata(file);
 
+	if (!pdev->udev)
+		return -ENODEV;
+
 	strcpy(cap->driver, PWC_NAME);
-	strlcpy(cap->card, vdev->name, sizeof(cap->card));
+	strlcpy(cap->card, pdev->vdev.name, sizeof(cap->card));
 	usb_make_path(pdev->udev, cap->bus_info, sizeof(cap->bus_info));
-	cap->version = PWC_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE	|
 		V4L2_CAP_STREAMING	|
@@ -377,255 +536,396 @@ static int pwc_s_input(struct file *file, void *fh, unsigned int i)
 	return i ? -EINVAL : 0;
 }
 
-static int pwc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *c)
+static int pwc_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int i, idx;
-	u32 id;
-
-	id = c->id;
-	if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
-		id &= V4L2_CTRL_ID_MASK;
-		id++;
-		idx = -1;
-		for (i = 0; i < ARRAY_SIZE(pwc_controls); i++) {
-			if (pwc_controls[i].id < id)
-				continue;
-			if (idx >= 0
-			 && pwc_controls[i].id > pwc_controls[idx].id)
-				continue;
-			idx = i;
+	struct pwc_device *pdev =
+		container_of(ctrl->handler, struct pwc_device, ctrl_handler);
+	int ret = 0;
+
+	/*
+	 * Sometimes it can take quite long for the pwc to complete usb control
+	 * transfers, so release the modlock to give streaming by another
+	 * process / thread the chance to continue with a dqbuf.
+	 */
+	mutex_unlock(&pdev->modlock);
+
+	/*
+	 * Take the udev-lock to protect against the disconnect handler
+	 * completing and setting dev->udev to NULL underneath us. Other code
+	 * does not need to do this since it is protected by the modlock.
+	 */
+	mutex_lock(&pdev->udevlock);
+
+	if (!pdev->udev) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		if (pdev->color_bal_valid && time_before(jiffies,
+				pdev->last_color_bal_update + HZ / 4)) {
+			pdev->red_balance->val  = pdev->last_red_balance;
+			pdev->blue_balance->val = pdev->last_blue_balance;
+			break;
 		}
-		if (idx < 0)
-			return -EINVAL;
-		memcpy(c, &pwc_controls[idx], sizeof pwc_controls[0]);
-		return 0;
+		ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+				      READ_RED_GAIN_FORMATTER,
+				      &pdev->red_balance->val);
+		if (ret)
+			break;
+		ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+				      READ_BLUE_GAIN_FORMATTER,
+				      &pdev->blue_balance->val);
+		if (ret)
+			break;
+		pdev->last_red_balance  = pdev->red_balance->val;
+		pdev->last_blue_balance = pdev->blue_balance->val;
+		pdev->last_color_bal_update = jiffies;
+		pdev->color_bal_valid = true;
+		break;
+	case V4L2_CID_AUTOGAIN:
+		if (pdev->gain_valid && time_before(jiffies,
+				pdev->last_gain_update + HZ / 4)) {
+			pdev->gain->val = pdev->last_gain;
+			break;
+		}
+		ret = pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+				      READ_AGC_FORMATTER, &pdev->gain->val);
+		if (ret)
+			break;
+		pdev->last_gain = pdev->gain->val;
+		pdev->last_gain_update = jiffies;
+		pdev->gain_valid = true;
+		if (!DEVICE_USE_CODEC3(pdev->type))
+			break;
+		/* Fall through for CODEC3 where autogain also controls expo */
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (pdev->exposure_valid && time_before(jiffies,
+				pdev->last_exposure_update + HZ / 4)) {
+			pdev->exposure->val = pdev->last_exposure;
+			break;
+		}
+		ret = pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+				       READ_SHUTTER_FORMATTER,
+				       &pdev->exposure->val);
+		if (ret)
+			break;
+		pdev->last_exposure = pdev->exposure->val;
+		pdev->last_exposure_update = jiffies;
+		pdev->exposure_valid = true;
+		break;
+	default:
+		ret = -EINVAL;
 	}
-	for (i = 0; i < sizeof(pwc_controls) / sizeof(struct v4l2_queryctrl); i++) {
-		if (pwc_controls[i].id == c->id) {
-			PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYCTRL) found\n");
-			memcpy(c, &pwc_controls[i], sizeof(struct v4l2_queryctrl));
-			return 0;
+
+	if (ret)
+		PWC_ERROR("g_ctrl %s error %d\n", ctrl->name, ret);
+
+leave:
+	mutex_unlock(&pdev->udevlock);
+	mutex_lock(&pdev->modlock);
+	return ret;
+}
+
+static int pwc_set_awb(struct pwc_device *pdev)
+{
+	int ret = 0;
+
+	if (pdev->auto_white_balance->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      WB_MODE_FORMATTER,
+				      pdev->auto_white_balance->val);
+		if (ret)
+			return ret;
+
+		/* Update val when coming from auto or going to a preset */
+		if (pdev->red_balance->is_volatile ||
+		    pdev->auto_white_balance->val == awb_indoor ||
+		    pdev->auto_white_balance->val == awb_outdoor ||
+		    pdev->auto_white_balance->val == awb_fl) {
+			if (!pdev->red_balance->is_new)
+				pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+					READ_RED_GAIN_FORMATTER,
+					&pdev->red_balance->val);
+			if (!pdev->blue_balance->is_new)
+				pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+					READ_BLUE_GAIN_FORMATTER,
+					&pdev->blue_balance->val);
+		}
+		if (pdev->auto_white_balance->val == awb_auto) {
+			pdev->red_balance->is_volatile = true;
+			pdev->blue_balance->is_volatile = true;
+			pdev->color_bal_valid = false; /* Force cache update */
+		} else {
+			pdev->red_balance->is_volatile = false;
+			pdev->blue_balance->is_volatile = false;
 		}
 	}
-	return -EINVAL;
+
+	if (ret == 0 && pdev->red_balance->is_new) {
+		if (pdev->auto_white_balance->val != awb_manual)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      PRESET_MANUAL_RED_GAIN_FORMATTER,
+				      pdev->red_balance->val);
+	}
+
+	if (ret == 0 && pdev->blue_balance->is_new) {
+		if (pdev->auto_white_balance->val != awb_manual)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+				      pdev->blue_balance->val);
+	}
+	return ret;
 }
 
-static int pwc_g_ctrl(struct file *file, void *fh, struct v4l2_control *c)
+/* For CODEC2 models which have separate autogain and auto exposure */
+static int pwc_set_autogain(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_drvdata(file);
-	int ret;
+	int ret = 0;
+
+	if (pdev->autogain->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      AGC_MODE_FORMATTER,
+				      pdev->autogain->val ? 0 : 0xff);
+		if (ret)
+			return ret;
+		if (pdev->autogain->val)
+			pdev->gain_valid = false; /* Force cache update */
+		else if (!pdev->gain->is_new)
+			pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+					READ_AGC_FORMATTER,
+					&pdev->gain->val);
+	}
+	if (ret == 0 && pdev->gain->is_new) {
+		if (pdev->autogain->val)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      PRESET_AGC_FORMATTER,
+				      pdev->gain->val);
+	}
+	return ret;
+}
 
-	switch (c->id) {
-	case V4L2_CID_BRIGHTNESS:
-		c->value = pwc_get_brightness(pdev);
-		if (c->value < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_CONTRAST:
-		c->value = pwc_get_contrast(pdev);
-		if (c->value < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_SATURATION:
-		ret = pwc_get_saturation(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_GAMMA:
-		c->value = pwc_get_gamma(pdev);
-		if (c->value < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		ret = pwc_get_red_gain(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 8;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = pwc_get_blue_gain(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 8;
-		return 0;
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret = pwc_get_awb(pdev);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (ret == PWC_WB_MANUAL) ? 0 : 1;
-		return 0;
-	case V4L2_CID_GAIN:
-		ret = pwc_get_agc(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 8;
-		return 0;
-	case V4L2_CID_AUTOGAIN:
-		ret = pwc_get_agc(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (c->value < 0) ? 1 : 0;
-		return 0;
-	case V4L2_CID_EXPOSURE:
-		ret = pwc_get_shutter_speed(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_COLOUR_MODE:
-		ret = pwc_get_colour_mode(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_AUTOCONTOUR:
-		ret = pwc_get_contour(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (c->value == -1 ? 1 : 0);
-		return 0;
-	case V4L2_CID_PRIVATE_CONTOUR:
-		ret = pwc_get_contour(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value >>= 10;
-		return 0;
-	case V4L2_CID_PRIVATE_BACKLIGHT:
-		ret = pwc_get_backlight(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_FLICKERLESS:
-		ret = pwc_get_flicker(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		c->value = (c->value ? 1 : 0);
-		return 0;
-	case V4L2_CID_PRIVATE_NOISE_REDUCTION:
-		ret = pwc_get_dynamic_noise(pdev, &c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+/* For CODEC2 models which have separate autogain and auto exposure */
+static int pwc_set_exposure_auto(struct pwc_device *pdev)
+{
+	int ret = 0;
+	int is_auto = pdev->exposure_auto->val == V4L2_EXPOSURE_AUTO;
+
+	if (pdev->exposure_auto->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      SHUTTER_MODE_FORMATTER,
+				      is_auto ? 0 : 0xff);
+		if (ret)
+			return ret;
+		if (is_auto)
+			pdev->exposure_valid = false; /* Force cache update */
+		else if (!pdev->exposure->is_new)
+			pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+					 READ_SHUTTER_FORMATTER,
+					 &pdev->exposure->val);
+	}
+	if (ret == 0 && pdev->exposure->is_new) {
+		if (is_auto)
+			return -EBUSY;
+		ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL,
+				       PRESET_SHUTTER_FORMATTER,
+				       pdev->exposure->val);
+	}
+	return ret;
+}
 
-	case V4L2_CID_PRIVATE_SAVE_USER:
-	case V4L2_CID_PRIVATE_RESTORE_USER:
-	case V4L2_CID_PRIVATE_RESTORE_FACTORY:
-		return -EINVAL;
+/* For CODEC3 models which have autogain controlling both gain and exposure */
+static int pwc_set_autogain_expo(struct pwc_device *pdev)
+{
+	int ret = 0;
+
+	if (pdev->autogain->is_new) {
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      AGC_MODE_FORMATTER,
+				      pdev->autogain->val ? 0 : 0xff);
+		if (ret)
+			return ret;
+		if (pdev->autogain->val) {
+			pdev->gain_valid     = false; /* Force cache update */
+			pdev->exposure_valid = false; /* Force cache update */
+		} else {
+			if (!pdev->gain->is_new)
+				pwc_get_u8_ctrl(pdev, GET_STATUS_CTL,
+						READ_AGC_FORMATTER,
+						&pdev->gain->val);
+			if (!pdev->exposure->is_new)
+				pwc_get_u16_ctrl(pdev, GET_STATUS_CTL,
+						 READ_SHUTTER_FORMATTER,
+						 &pdev->exposure->val);
+		}
 	}
-	return -EINVAL;
+	if (ret == 0 && pdev->gain->is_new) {
+		if (pdev->autogain->val)
+			return -EBUSY;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      PRESET_AGC_FORMATTER,
+				      pdev->gain->val);
+	}
+	if (ret == 0 && pdev->exposure->is_new) {
+		if (pdev->autogain->val)
+			return -EBUSY;
+		ret = pwc_set_u16_ctrl(pdev, SET_LUM_CTL,
+				       PRESET_SHUTTER_FORMATTER,
+				       pdev->exposure->val);
+	}
+	return ret;
 }
 
-static int pwc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c)
+static int pwc_set_motor(struct pwc_device *pdev)
 {
-	struct pwc_device *pdev = video_drvdata(file);
 	int ret;
+	u8 buf[4];
+
+	buf[0] = 0;
+	if (pdev->motor_pan_reset->is_new)
+		buf[0] |= 0x01;
+	if (pdev->motor_tilt_reset->is_new)
+		buf[0] |= 0x02;
+	if (pdev->motor_pan_reset->is_new || pdev->motor_tilt_reset->is_new) {
+		ret = send_control_msg(pdev, SET_MPT_CTL,
+				       PT_RESET_CONTROL_FORMATTER, buf, 1);
+		if (ret < 0)
+			return ret;
+	}
 
-	switch (c->id) {
-	case V4L2_CID_BRIGHTNESS:
-		c->value <<= 9;
-		ret = pwc_set_brightness(pdev, c->value);
+	memset(buf, 0, sizeof(buf));
+	if (pdev->motor_pan->is_new) {
+		buf[0] = pdev->motor_pan->val & 0xFF;
+		buf[1] = (pdev->motor_pan->val >> 8);
+	}
+	if (pdev->motor_tilt->is_new) {
+		buf[2] = pdev->motor_tilt->val & 0xFF;
+		buf[3] = (pdev->motor_tilt->val >> 8);
+	}
+	if (pdev->motor_pan->is_new || pdev->motor_tilt->is_new) {
+		ret = send_control_msg(pdev, SET_MPT_CTL,
+				       PT_RELATIVE_CONTROL_FORMATTER,
+				       buf, sizeof(buf));
 		if (ret < 0)
-			return -EINVAL;
-		return 0;
+			return ret;
+	}
+
+	return 0;
+}
+
+static int pwc_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct pwc_device *pdev =
+		container_of(ctrl->handler, struct pwc_device, ctrl_handler);
+	int ret = 0;
+
+	/* See the comments on locking in pwc_g_volatile_ctrl */
+	mutex_unlock(&pdev->modlock);
+	mutex_lock(&pdev->udevlock);
+
+	if (!pdev->udev) {
+		ret = -ENODEV;
+		goto leave;
+	}
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      BRIGHTNESS_FORMATTER, ctrl->val);
+		break;
 	case V4L2_CID_CONTRAST:
-		c->value <<= 10;
-		ret = pwc_set_contrast(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      CONTRAST_FORMATTER, ctrl->val);
+		break;
 	case V4L2_CID_SATURATION:
-		ret = pwc_set_saturation(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_s8_ctrl(pdev, SET_CHROM_CTL,
+				      pdev->saturation_fmt, ctrl->val);
+		break;
 	case V4L2_CID_GAMMA:
-		c->value <<= 11;
-		ret = pwc_set_gamma(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		c->value <<= 8;
-		ret = pwc_set_red_gain(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		c->value <<= 8;
-		ret = pwc_set_blue_gain(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      GAMMA_FORMATTER, ctrl->val);
+		break;
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		c->value = (c->value == 0) ? PWC_WB_MANUAL : PWC_WB_AUTO;
-		ret = pwc_set_awb(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_EXPOSURE:
-		c->value <<= 8;
-		ret = pwc_set_shutter_speed(pdev, c->value ? 0 : 1, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
+		ret = pwc_set_awb(pdev);
+		break;
 	case V4L2_CID_AUTOGAIN:
-		/* autogain off means nothing without a gain */
-		if (c->value == 0)
-			return 0;
-		ret = pwc_set_agc(pdev, c->value, 0);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_GAIN:
-		c->value <<= 8;
-		ret = pwc_set_agc(pdev, 0, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_SAVE_USER:
-		if (pwc_save_user(pdev))
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_RESTORE_USER:
-		if (pwc_restore_user(pdev))
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_RESTORE_FACTORY:
-		if (pwc_restore_factory(pdev))
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_COLOUR_MODE:
-		ret = pwc_set_colour_mode(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_AUTOCONTOUR:
-		c->value = (c->value == 1) ? -1 : 0;
-		ret = pwc_set_contour(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_CONTOUR:
-		c->value <<= 10;
-		ret = pwc_set_contour(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_BACKLIGHT:
-		ret = pwc_set_backlight(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-	case V4L2_CID_PRIVATE_FLICKERLESS:
-		ret = pwc_set_flicker(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-	case V4L2_CID_PRIVATE_NOISE_REDUCTION:
-		ret = pwc_set_dynamic_noise(pdev, c->value);
-		if (ret < 0)
-			return -EINVAL;
-		return 0;
-
+		if (DEVICE_USE_CODEC2(pdev->type))
+			ret = pwc_set_autogain(pdev);
+		else if (DEVICE_USE_CODEC3(pdev->type))
+			ret = pwc_set_autogain_expo(pdev);
+		else
+			ret = -EINVAL;
+		break;
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (DEVICE_USE_CODEC2(pdev->type))
+			ret = pwc_set_exposure_auto(pdev);
+		else
+			ret = -EINVAL;
+		break;
+	case V4L2_CID_COLORFX:
+		ret = pwc_set_u8_ctrl(pdev, SET_CHROM_CTL,
+				      COLOUR_MODE_FORMATTER,
+				      ctrl->val ? 0 : 0xff);
+		break;
+	case PWC_CID_CUSTOM(autocontour):
+		if (pdev->autocontour->is_new) {
+			ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+					AUTO_CONTOUR_FORMATTER,
+					pdev->autocontour->val ? 0 : 0xff);
+		}
+		if (ret == 0 && pdev->contour->is_new) {
+			if (pdev->autocontour->val) {
+				ret = -EBUSY;
+				break;
+			}
+			ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+					      PRESET_CONTOUR_FORMATTER,
+					      pdev->contour->val);
+		}
+		break;
+	case V4L2_CID_BACKLIGHT_COMPENSATION:
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      BACK_LIGHT_COMPENSATION_FORMATTER,
+				      ctrl->val ? 0 : 0xff);
+		break;
+	case V4L2_CID_BAND_STOP_FILTER:
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      FLICKERLESS_MODE_FORMATTER,
+				      ctrl->val ? 0 : 0xff);
+		break;
+	case PWC_CID_CUSTOM(noise_reduction):
+		ret = pwc_set_u8_ctrl(pdev, SET_LUM_CTL,
+				      DYNAMIC_NOISE_CONTROL_FORMATTER,
+				      ctrl->val);
+		break;
+	case PWC_CID_CUSTOM(save_user):
+		ret = pwc_button_ctrl(pdev, SAVE_USER_DEFAULTS_FORMATTER);
+		break;
+	case PWC_CID_CUSTOM(restore_user):
+		ret = pwc_button_ctrl(pdev, RESTORE_USER_DEFAULTS_FORMATTER);
+		break;
+	case PWC_CID_CUSTOM(restore_factory):
+		ret = pwc_button_ctrl(pdev,
+				      RESTORE_FACTORY_DEFAULTS_FORMATTER);
+		break;
+	case V4L2_CID_PAN_RELATIVE:
+		ret = pwc_set_motor(pdev);
+		break;
+	default:
+		ret = -EINVAL;
 	}
-	return -EINVAL;
+
+	if (ret)
+		PWC_ERROR("s_ctrl %s error %d\n", ctrl->name, ret);
+
+leave:
+	mutex_unlock(&pdev->udevlock);
+	mutex_lock(&pdev->modlock);
+	return ret;
 }
 
 static int pwc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
@@ -667,157 +967,77 @@ static int pwc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *
 	return pwc_vidioc_try_fmt(pdev, f);
 }
 
-static int pwc_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+static int pwc_reqbufs(struct file *file, void *fh,
+		       struct v4l2_requestbuffers *rb)
 {
 	struct pwc_device *pdev = video_drvdata(file);
 
-	return pwc_vidioc_set_fmt(pdev, f);
-}
-
-static int pwc_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *rb)
-{
-	int nbuffers;
+	if (pdev->capt_file != NULL &&
+	    pdev->capt_file != file)
+		return -EBUSY;
 
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_REQBUFS) count=%d\n", rb->count);
-	if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (rb->memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
+	pdev->capt_file = file;
 
-	nbuffers = rb->count;
-	if (nbuffers < 2)
-		nbuffers = 2;
-	else if (nbuffers > pwc_mbufs)
-		nbuffers = pwc_mbufs;
-	/* Force to use our # of buffers */
-	rb->count = pwc_mbufs;
-	return 0;
+	return vb2_reqbufs(&pdev->vb_queue, rb);
 }
 
 static int pwc_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 {
 	struct pwc_device *pdev = video_drvdata(file);
-	int index;
 
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) index=%d\n", buf->index);
-	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad type\n");
-		return -EINVAL;
-	}
-	index = buf->index;
-	if (index < 0 || index >= pwc_mbufs) {
-		PWC_DEBUG_IOCTL("ioctl(VIDIOC_QUERYBUF) Bad index %d\n", buf->index);
-		return -EINVAL;
-	}
-
-	buf->m.offset = index * pdev->len_per_image;
-	if (pdev->pixfmt != V4L2_PIX_FMT_YUV420)
-		buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame);
-	else
-		buf->bytesused = pdev->view.size;
-	buf->field = V4L2_FIELD_NONE;
-	buf->memory = V4L2_MEMORY_MMAP;
-	/*buf->flags = V4L2_BUF_FLAG_MAPPED;*/
-	buf->length = pdev->len_per_image;
-
-	PWC_DEBUG_READ("VIDIOC_QUERYBUF: index=%d\n", buf->index);
-	PWC_DEBUG_READ("VIDIOC_QUERYBUF: m.offset=%d\n", buf->m.offset);
-	PWC_DEBUG_READ("VIDIOC_QUERYBUF: bytesused=%d\n", buf->bytesused);
-
-	return 0;
+	return vb2_querybuf(&pdev->vb_queue, buf);
 }
 
 static int pwc_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 {
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_QBUF) index=%d\n", buf->index);
-	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (buf->memory != V4L2_MEMORY_MMAP)
-		return -EINVAL;
-	if (buf->index >= pwc_mbufs)
-		return -EINVAL;
+	struct pwc_device *pdev = video_drvdata(file);
 
-	buf->flags |= V4L2_BUF_FLAG_QUEUED;
-	buf->flags &= ~V4L2_BUF_FLAG_DONE;
+	if (!pdev->udev)
+		return -ENODEV;
 
-	return 0;
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_qbuf(&pdev->vb_queue, buf);
 }
 
 static int pwc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 {
-	DECLARE_WAITQUEUE(wait, current);
 	struct pwc_device *pdev = video_drvdata(file);
-	int ret;
 
-	PWC_DEBUG_IOCTL("ioctl(VIDIOC_DQBUF)\n");
+	if (!pdev->udev)
+		return -ENODEV;
 
-	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	add_wait_queue(&pdev->frameq, &wait);
-	while (pdev->full_frames == NULL) {
-		if (pdev->error_status) {
-			remove_wait_queue(&pdev->frameq, &wait);
-			set_current_state(TASK_RUNNING);
-			return -pdev->error_status;
-		}
-
-		if (signal_pending(current)) {
-			remove_wait_queue(&pdev->frameq, &wait);
-			set_current_state(TASK_RUNNING);
-			return -ERESTARTSYS;
-		}
-		mutex_unlock(&pdev->modlock);
-		schedule();
-		set_current_state(TASK_INTERRUPTIBLE);
-		mutex_lock(&pdev->modlock);
-	}
-	remove_wait_queue(&pdev->frameq, &wait);
-	set_current_state(TASK_RUNNING);
-
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: frame ready.\n");
-	/* Decompress data in pdev->images[pdev->fill_image] */
-	ret = pwc_handle_frame(pdev);
-	if (ret)
-		return -EFAULT;
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: after pwc_handle_frame\n");
-
-	buf->index = pdev->fill_image;
-	if (pdev->pixfmt != V4L2_PIX_FMT_YUV420)
-		buf->bytesused = pdev->frame_size + sizeof(struct pwc_raw_frame);
-	else
-		buf->bytesused = pdev->view.size;
-	buf->flags = V4L2_BUF_FLAG_MAPPED;
-	buf->field = V4L2_FIELD_NONE;
-	do_gettimeofday(&buf->timestamp);
-	buf->sequence = 0;
-	buf->memory = V4L2_MEMORY_MMAP;
-	buf->m.offset = pdev->fill_image * pdev->len_per_image;
-	buf->length = pdev->len_per_image;
-	pwc_next_image(pdev);
-
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->index=%d\n", buf->index);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: buf->length=%d\n", buf->length);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: m.offset=%d\n", buf->m.offset);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: bytesused=%d\n", buf->bytesused);
-	PWC_DEBUG_IOCTL("VIDIOC_DQBUF: leaving\n");
-	return 0;
+	if (pdev->capt_file != file)
+		return -EBUSY;
 
+	return vb2_dqbuf(&pdev->vb_queue, buf, file->f_flags & O_NONBLOCK);
 }
 
 static int pwc_streamon(struct file *file, void *fh, enum v4l2_buf_type i)
 {
 	struct pwc_device *pdev = video_drvdata(file);
 
-	return pwc_isoc_init(pdev);
+	if (!pdev->udev)
+		return -ENODEV;
+
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_streamon(&pdev->vb_queue, i);
 }
 
 static int pwc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 {
 	struct pwc_device *pdev = video_drvdata(file);
 
-	pwc_isoc_cleanup(pdev);
-	return 0;
+	if (!pdev->udev)
+		return -ENODEV;
+
+	if (pdev->capt_file != file)
+		return -EBUSY;
+
+	return vb2_streamoff(&pdev->vb_queue, i);
 }
 
 static int pwc_enum_framesizes(struct file *file, void *fh,
@@ -896,9 +1116,6 @@ const struct v4l2_ioctl_ops pwc_ioctl_ops = {
 	.vidioc_g_fmt_vid_cap		    = pwc_g_fmt_vid_cap,
 	.vidioc_s_fmt_vid_cap		    = pwc_s_fmt_vid_cap,
 	.vidioc_try_fmt_vid_cap		    = pwc_try_fmt_vid_cap,
-	.vidioc_queryctrl		    = pwc_queryctrl,
-	.vidioc_g_ctrl			    = pwc_g_ctrl,
-	.vidioc_s_ctrl			    = pwc_s_ctrl,
 	.vidioc_reqbufs			    = pwc_reqbufs,
 	.vidioc_querybuf		    = pwc_querybuf,
 	.vidioc_qbuf			    = pwc_qbuf,
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 083f8b15df7..0e4e2d7b787 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
 #include <linux/usb.h>
 #include <linux/spinlock.h>
 #include <linux/wait.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
@@ -37,19 +36,16 @@
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-vmalloc.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/input.h>
 #endif
 
-#include "pwc-uncompress.h"
 #include <media/pwc-ioctl.h>
 
 /* Version block */
-#define PWC_MAJOR	10
-#define PWC_MINOR	0
-#define PWC_EXTRAMINOR	12
-#define PWC_VERSION_CODE KERNEL_VERSION(PWC_MAJOR,PWC_MINOR,PWC_EXTRAMINOR)
-#define PWC_VERSION	"10.0.14"
+#define PWC_VERSION	"10.0.15"
 #define PWC_NAME 	"pwc"
 #define PFX		PWC_NAME ": "
 
@@ -81,9 +77,9 @@
 #define PWC_DEBUG_LEVEL	(PWC_DEBUG_LEVEL_MODULE)
 
 #define PWC_DEBUG(level, fmt, args...) do {\
-	  if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \
-	     printk(KERN_DEBUG PFX fmt, ##args); \
-	  } while(0)
+	if ((PWC_DEBUG_LEVEL_ ##level) & pwc_trace) \
+		printk(KERN_DEBUG PFX fmt, ##args); \
+	} while (0)
 
 #define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args)
 #define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args)
@@ -110,25 +106,21 @@
 #define FEATURE_CODEC1			0x0002
 #define FEATURE_CODEC2			0x0004
 
-/* Turn certain features on/off */
-#define PWC_INT_PIPE 0
-
 /* Ignore errors in the first N frames, to allow for startup delays */
 #define FRAME_LOWMARK 5
 
 /* Size and number of buffers for the ISO pipe. */
-#define MAX_ISO_BUFS		2
+#define MAX_ISO_BUFS		3
 #define ISO_FRAMES_PER_DESC	10
 #define ISO_MAX_FRAME_SIZE	960
 #define ISO_BUFFER_SIZE 	(ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
 
-/* Frame buffers: contains compressed or uncompressed video data. */
-#define MAX_FRAMES		5
 /* Maximum size after decompression is 640x480 YUV data, 1.5 * 640 * 480 */
 #define PWC_FRAME_SIZE 		(460800 + TOUCAM_HEADER_SIZE + TOUCAM_TRAILER_SIZE)
 
-/* Absolute maximum number of buffers available for mmap() */
-#define MAX_IMAGES 		10
+/* Absolute minimum and maximum number of buffers available for mmap() */
+#define MIN_FRAMES		2
+#define MAX_FRAMES		16
 
 /* Some macros to quickly find the type of a webcam */
 #define DEVICE_USE_CODEC1(x) ((x)<675)
@@ -136,149 +128,221 @@
 #define DEVICE_USE_CODEC3(x) ((x)>=700)
 #define DEVICE_USE_CODEC23(x) ((x)>=675)
 
-/* The following structures were based on cpia.h. Why reinvent the wheel? :-) */
-struct pwc_iso_buf
-{
-	void *data;
-	int  length;
-	int  read;
-	struct urb *urb;
-};
+/* from pwc-dec.h */
+#define PWCX_FLAG_PLANAR        0x0001
+
+/* Request types: video */
+#define SET_LUM_CTL			0x01
+#define GET_LUM_CTL			0x02
+#define SET_CHROM_CTL			0x03
+#define GET_CHROM_CTL			0x04
+#define SET_STATUS_CTL			0x05
+#define GET_STATUS_CTL			0x06
+#define SET_EP_STREAM_CTL		0x07
+#define GET_EP_STREAM_CTL		0x08
+#define GET_XX_CTL			0x09
+#define SET_XX_CTL			0x0A
+#define GET_XY_CTL			0x0B
+#define SET_XY_CTL			0x0C
+#define SET_MPT_CTL			0x0D
+#define GET_MPT_CTL			0x0E
+
+/* Selectors for the Luminance controls [GS]ET_LUM_CTL */
+#define AGC_MODE_FORMATTER			0x2000
+#define PRESET_AGC_FORMATTER			0x2100
+#define SHUTTER_MODE_FORMATTER			0x2200
+#define PRESET_SHUTTER_FORMATTER		0x2300
+#define PRESET_CONTOUR_FORMATTER		0x2400
+#define AUTO_CONTOUR_FORMATTER			0x2500
+#define BACK_LIGHT_COMPENSATION_FORMATTER	0x2600
+#define CONTRAST_FORMATTER			0x2700
+#define DYNAMIC_NOISE_CONTROL_FORMATTER		0x2800
+#define FLICKERLESS_MODE_FORMATTER		0x2900
+#define AE_CONTROL_SPEED			0x2A00
+#define BRIGHTNESS_FORMATTER			0x2B00
+#define GAMMA_FORMATTER				0x2C00
+
+/* Selectors for the Chrominance controls [GS]ET_CHROM_CTL */
+#define WB_MODE_FORMATTER			0x1000
+#define AWB_CONTROL_SPEED_FORMATTER		0x1100
+#define AWB_CONTROL_DELAY_FORMATTER		0x1200
+#define PRESET_MANUAL_RED_GAIN_FORMATTER	0x1300
+#define PRESET_MANUAL_BLUE_GAIN_FORMATTER	0x1400
+#define COLOUR_MODE_FORMATTER			0x1500
+#define SATURATION_MODE_FORMATTER1		0x1600
+#define SATURATION_MODE_FORMATTER2		0x1700
+
+/* Selectors for the Status controls [GS]ET_STATUS_CTL */
+#define SAVE_USER_DEFAULTS_FORMATTER		0x0200
+#define RESTORE_USER_DEFAULTS_FORMATTER		0x0300
+#define RESTORE_FACTORY_DEFAULTS_FORMATTER	0x0400
+#define READ_AGC_FORMATTER			0x0500
+#define READ_SHUTTER_FORMATTER			0x0600
+#define READ_RED_GAIN_FORMATTER			0x0700
+#define READ_BLUE_GAIN_FORMATTER		0x0800
+
+/* Formatters for the motorized pan & tilt [GS]ET_MPT_CTL */
+#define PT_RELATIVE_CONTROL_FORMATTER		0x01
+#define PT_RESET_CONTROL_FORMATTER		0x02
+#define PT_STATUS_FORMATTER			0x03
 
 /* intermediate buffers with raw data from the USB cam */
 struct pwc_frame_buf
 {
-   void *data;
-   volatile int filled;		/* number of bytes filled */
-   struct pwc_frame_buf *next;	/* list */
-};
-
-/* additionnal informations used when dealing image between kernel and userland */
-struct pwc_imgbuf
-{
-	unsigned long offset;	/* offset of this buffer in the big array of image_data */
-	int   vma_use_count;	/* count the number of time this memory is mapped */
+	struct vb2_buffer vb;	/* common v4l buffer stuff -- must be first */
+	struct list_head list;
+	void *data;
+	int filled;		/* number of bytes filled */
 };
 
 struct pwc_device
 {
 	struct video_device vdev;
-
-   /* Pointer to our usb_device, may be NULL after unplug */
-   struct usb_device *udev;
-
-   int type;                    /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
-   int release;			/* release number */
-   int features;		/* feature bits */
-   char serial[30];		/* serial number (string) */
-   int error_status;		/* set when something goes wrong with the cam (unplugged, USB errors) */
-   int usb_init;		/* set when the cam has been initialized over USB */
-
-   /*** Video data ***/
-   int vopen;			/* flag */
-   int vendpoint;		/* video isoc endpoint */
-   int vcinterface;		/* video control interface */
-   int valternate;		/* alternate interface needed */
-   int vframes, vsize;		/* frames-per-second & size (see PSZ_*) */
-   int pixfmt;			/* pixelformat: V4L2_PIX_FMT_YUV420 or raw: _PWC1, _PWC2 */
-   int vframe_count;		/* received frames */
-   int vframes_dumped; 		/* counter for dumped frames */
-   int vframes_error;		/* frames received in error */
-   int vmax_packet_size;	/* USB maxpacket size */
-   int vlast_packet_size;	/* for frame synchronisation */
-   int visoc_errors;		/* number of contiguous ISOC errors */
-   int vcompression;		/* desired compression factor */
-   int vbandlength;		/* compressed band length; 0 is uncompressed */
-   char vsnapshot;		/* snapshot mode */
-   char vsync;			/* used by isoc handler */
-   char vmirror;		/* for ToUCaM series */
-	char unplugged;
-
-   int cmd_len;
-   unsigned char cmd_buf[13];
-
-   /* The image acquisition requires 3 to 4 steps:
-      1. data is gathered in short packets from the USB controller
-      2. data is synchronized and packed into a frame buffer
-      3a. in case data is compressed, decompress it directly into image buffer
-      3b. in case data is uncompressed, copy into image buffer with viewport
-      4. data is transferred to the user process
-
-      Note that MAX_ISO_BUFS != MAX_FRAMES != MAX_IMAGES....
-      We have in effect a back-to-back-double-buffer system.
-    */
-   /* 1: isoc */
-   struct pwc_iso_buf sbuf[MAX_ISO_BUFS];
-   char iso_init;
-
-   /* 2: frame */
-   struct pwc_frame_buf *fbuf;	/* all frames */
-   struct pwc_frame_buf *empty_frames, *empty_frames_tail;	/* all empty frames */
-   struct pwc_frame_buf *full_frames, *full_frames_tail;	/* all filled frames */
-   struct pwc_frame_buf *fill_frame;	/* frame currently being filled */
-   struct pwc_frame_buf *read_frame;	/* frame currently read by user process */
-   int frame_header_size, frame_trailer_size;
-   int frame_size;
-   int frame_total_size; /* including header & trailer */
-   int drop_frames;
-
-   /* 3: decompression */
-   void *decompress_data;		/* private data for decompression engine */
-
-   /* 4: image */
-   /* We have an 'image' and a 'view', where 'image' is the fixed-size image
-      as delivered by the camera, and 'view' is the size requested by the
-      program. The camera image is centered in this viewport, laced with
-      a gray or black border. view_min <= image <= view <= view_max;
-    */
-   int image_mask;			/* bitmask of supported sizes */
-   struct pwc_coord view_min, view_max;	/* minimum and maximum viewable sizes */
-   struct pwc_coord abs_max;            /* maximum supported size with compression */
-   struct pwc_coord image, view;	/* image and viewport size */
-   struct pwc_coord offset;		/* offset within the viewport */
-
-   void *image_data;			/* total buffer, which is subdivided into ... */
-   struct pwc_imgbuf images[MAX_IMAGES];/* ...several images... */
-   int fill_image;			/* ...which are rotated. */
-   int len_per_image;			/* length per image */
-   int image_read_pos;			/* In case we read data in pieces, keep track of were we are in the imagebuffer */
-   int image_used[MAX_IMAGES];		/* For MCAPTURE and SYNC */
-
-   struct mutex modlock;		/* to prevent races in video_open(), etc */
-   spinlock_t ptrlock;			/* for manipulating the buffer pointers */
-
-   /*** motorized pan/tilt feature */
-   struct pwc_mpt_range angle_range;
-   int pan_angle;			/* in degrees * 100 */
-   int tilt_angle;			/* absolute angle; 0,0 is home position */
-   int snapshot_button_status;		/* set to 1 when the user push the button, reset to 0 when this value is read */
+	struct mutex modlock;
+
+	/* Pointer to our usb_device, may be NULL after unplug */
+	struct usb_device *udev;
+	/* Protects the setting of udev to NULL by our disconnect handler */
+	struct mutex udevlock;
+
+	/* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
+	int type;
+	int release;		/* release number */
+	int features;		/* feature bits */
+	char serial[30];	/* serial number (string) */
+
+	/*** Video data ***/
+	struct file *capt_file;	/* file doing video capture */
+	int vendpoint;		/* video isoc endpoint */
+	int vcinterface;	/* video control interface */
+	int valternate;		/* alternate interface needed */
+	int vframes, vsize;	/* frames-per-second & size (see PSZ_*) */
+	int pixfmt;		/* pixelformat: V4L2_PIX_FMT_YUV420 or _PWCX */
+	int vframe_count;	/* received frames */
+	int vmax_packet_size;	/* USB maxpacket size */
+	int vlast_packet_size;	/* for frame synchronisation */
+	int visoc_errors;	/* number of contiguous ISOC errors */
+	int vcompression;	/* desired compression factor */
+	int vbandlength;	/* compressed band length; 0 is uncompressed */
+	char vsnapshot;		/* snapshot mode */
+	char vsync;		/* used by isoc handler */
+	char vmirror;		/* for ToUCaM series */
+	char power_save;	/* Do powersaving for this cam */
+
+	int cmd_len;
+	unsigned char cmd_buf[13];
+
+	struct urb *urbs[MAX_ISO_BUFS];
+	char iso_init;
+
+	/* videobuf2 queue and queued buffers list */
+	struct vb2_queue vb_queue;
+	struct list_head queued_bufs;
+	spinlock_t queued_bufs_lock;
+
+	/*
+	 * Frame currently being filled, this only gets touched by the
+	 * isoc urb complete handler, and by stream start / stop since
+	 * start / stop touch it before / after starting / killing the urbs
+	 * no locking is needed around this
+	 */
+	struct pwc_frame_buf *fill_buf;
+
+	int frame_header_size, frame_trailer_size;
+	int frame_size;
+	int frame_total_size;	/* including header & trailer */
+	int drop_frames;
+
+	void *decompress_data;	/* private data for decompression engine */
+
+	/*
+	 * We have an 'image' and a 'view', where 'image' is the fixed-size img
+	 * as delivered by the camera, and 'view' is the size requested by the
+	 * program. The camera image is centered in this viewport, laced with
+	 * a gray or black border. view_min <= image <= view <= view_max;
+	 */
+	int image_mask;				/* supported sizes */
+	struct pwc_coord view_min, view_max;	/* minimum and maximum view */
+	struct pwc_coord abs_max;		/* maximum supported size */
+	struct pwc_coord image, view;		/* image and viewport size */
+	struct pwc_coord offset;		/* offset of the viewport */
+
+	/*** motorized pan/tilt feature */
+	struct pwc_mpt_range angle_range;
+	int pan_angle;			/* in degrees * 100 */
+	int tilt_angle;			/* absolute angle; 0,0 is home */
+
+	/*
+	 * Set to 1 when the user push the button, reset to 0
+	 * when this value is read from sysfs.
+	 */
+	int snapshot_button_status;
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
-   struct input_dev *button_dev;	/* webcam snapshot button input */
-   char button_phys[64];
+	struct input_dev *button_dev;	/* webcam snapshot button input */
+	char button_phys[64];
 #endif
 
-   /*** Misc. data ***/
-   wait_queue_head_t frameq;		/* When waiting for a frame to finish... */
-#if PWC_INT_PIPE
-   void *usb_int_handler;		/* for the interrupt endpoint */
-#endif
+	/* controls */
+	struct v4l2_ctrl_handler	ctrl_handler;
+	u16				saturation_fmt;
+	struct v4l2_ctrl		*brightness;
+	struct v4l2_ctrl		*contrast;
+	struct v4l2_ctrl		*saturation;
+	struct v4l2_ctrl		*gamma;
+	struct {
+		/* awb / red-blue balance cluster */
+		struct v4l2_ctrl	*auto_white_balance;
+		struct v4l2_ctrl	*red_balance;
+		struct v4l2_ctrl	*blue_balance;
+		/* usb ctrl transfers are slow, so we cache things */
+		int			color_bal_valid;
+		unsigned long		last_color_bal_update; /* In jiffies */
+		s32			last_red_balance;
+		s32			last_blue_balance;
+	};
+	struct {
+		/* autogain / gain cluster */
+		struct v4l2_ctrl	*autogain;
+		struct v4l2_ctrl	*gain;
+		int			gain_valid;
+		unsigned long		last_gain_update; /* In jiffies */
+		s32			last_gain;
+	};
+	struct {
+		/* exposure_auto / exposure cluster */
+		struct v4l2_ctrl	*exposure_auto;
+		struct v4l2_ctrl	*exposure;
+		int			exposure_valid;
+		unsigned long		last_exposure_update; /* In jiffies */
+		s32			last_exposure;
+	};
+	struct v4l2_ctrl		*colorfx;
+	struct {
+		/* autocontour/contour cluster */
+		struct v4l2_ctrl	*autocontour;
+		struct v4l2_ctrl	*contour;
+	};
+	struct v4l2_ctrl		*backlight;
+	struct v4l2_ctrl		*flicker;
+	struct v4l2_ctrl		*noise_reduction;
+	struct v4l2_ctrl		*save_user;
+	struct v4l2_ctrl		*restore_user;
+	struct v4l2_ctrl		*restore_factory;
+	struct {
+		/* motor control cluster */
+		struct v4l2_ctrl	*motor_pan;
+		struct v4l2_ctrl	*motor_tilt;
+		struct v4l2_ctrl	*motor_pan_reset;
+		struct v4l2_ctrl	*motor_tilt_reset;
+	};
+	/* CODEC3 models have both gain and exposure controlled by autogain */
+	struct v4l2_ctrl		*autogain_expo_cluster[3];
 };
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 /* Global variables */
 #ifdef CONFIG_USB_PWC_DEBUG
 extern int pwc_trace;
 #endif
-extern int pwc_mbufs;
-
-/** functions in pwc-if.c */
-int pwc_handle_frame(struct pwc_device *pdev);
-void pwc_next_image(struct pwc_device *pdev);
-int pwc_isoc_init(struct pwc_device *pdev);
-void pwc_isoc_cleanup(struct pwc_device *pdev);
 
 /** Functions in pwc-misc.c */
 /* sizes in pixels */
@@ -291,50 +355,25 @@ void pwc_construct(struct pwc_device *pdev);
 /* Request a certain video mode. Returns < 0 if not possible */
 extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot);
 extern unsigned int pwc_get_fps(struct pwc_device *pdev, unsigned int index, unsigned int size);
-/* Calculate the number of bytes per image (not frame) */
 extern int pwc_mpt_reset(struct pwc_device *pdev, int flags);
 extern int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt);
-
-/* Various controls; should be obvious. Value 0..65535, or < 0 on error */
-extern int pwc_get_brightness(struct pwc_device *pdev);
-extern int pwc_set_brightness(struct pwc_device *pdev, int value);
-extern int pwc_get_contrast(struct pwc_device *pdev);
-extern int pwc_set_contrast(struct pwc_device *pdev, int value);
-extern int pwc_get_gamma(struct pwc_device *pdev);
-extern int pwc_set_gamma(struct pwc_device *pdev, int value);
-extern int pwc_get_saturation(struct pwc_device *pdev, int *value);
-extern int pwc_set_saturation(struct pwc_device *pdev, int value);
 extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
 extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
-extern int pwc_restore_user(struct pwc_device *pdev);
-extern int pwc_save_user(struct pwc_device *pdev);
-extern int pwc_restore_factory(struct pwc_device *pdev);
-
-/* exported for use by v4l2 controls */
-extern int pwc_get_red_gain(struct pwc_device *pdev, int *value);
-extern int pwc_set_red_gain(struct pwc_device *pdev, int value);
-extern int pwc_get_blue_gain(struct pwc_device *pdev, int *value);
-extern int pwc_set_blue_gain(struct pwc_device *pdev, int value);
-extern int pwc_get_awb(struct pwc_device *pdev);
-extern int pwc_set_awb(struct pwc_device *pdev, int mode);
-extern int pwc_set_agc(struct pwc_device *pdev, int mode, int value);
-extern int pwc_get_agc(struct pwc_device *pdev, int *value);
-extern int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value);
-extern int pwc_get_shutter_speed(struct pwc_device *pdev, int *value);
-
-extern int pwc_set_colour_mode(struct pwc_device *pdev, int colour);
-extern int pwc_get_colour_mode(struct pwc_device *pdev, int *colour);
-extern int pwc_set_contour(struct pwc_device *pdev, int contour);
-extern int pwc_get_contour(struct pwc_device *pdev, int *contour);
-extern int pwc_set_backlight(struct pwc_device *pdev, int backlight);
-extern int pwc_get_backlight(struct pwc_device *pdev, int *backlight);
-extern int pwc_set_flicker(struct pwc_device *pdev, int flicker);
-extern int pwc_get_flicker(struct pwc_device *pdev, int *flicker);
-extern int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise);
-extern int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise);
+extern int send_control_msg(struct pwc_device *pdev,
+			    u8 request, u16 value, void *buf, int buflen);
+
+/* Control get / set helpers */
+int pwc_get_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data);
+int pwc_set_u8_ctrl(struct pwc_device *pdev, u8 request, u16 value, u8 data);
+int pwc_get_s8_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *data);
+#define pwc_set_s8_ctrl pwc_set_u8_ctrl
+int pwc_get_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, int *dat);
+int pwc_set_u16_ctrl(struct pwc_device *pdev, u8 request, u16 value, u16 data);
+int pwc_button_ctrl(struct pwc_device *pdev, u16 value);
+int pwc_init_controls(struct pwc_device *pdev);
 
 /* Power down or up the camera; not supported by all models */
-extern int pwc_camera_power(struct pwc_device *pdev, int power);
+extern void pwc_camera_power(struct pwc_device *pdev, int power);
 
 /* Private ioctl()s; see pwc-ioctl.h */
 extern long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg);
@@ -343,12 +382,6 @@ extern const struct v4l2_ioctl_ops pwc_ioctl_ops;
 
 /** pwc-uncompress.c */
 /* Expand frame to image, possibly including decompression. Uses read_frame and fill_image */
-extern int pwc_decompress(struct pwc_device *pdev);
-
-#ifdef __cplusplus
-}
-#endif
-
+int pwc_decompress(struct pwc_device *pdev, struct pwc_frame_buf *fbuf);
 
 #endif
-/* vim: set cino= formatoptions=croql cindent shiftwidth=8 tabstop=8: */
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index b42bfa5ccdf..d07df22a5ec 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/moduleparam.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -40,7 +39,7 @@
 #include <mach/dma.h>
 #include <mach/camera.h>
 
-#define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5)
+#define PXA_CAM_VERSION "0.0.6"
 #define PXA_CAM_DRV_NAME "pxa27x-camera"
 
 /* Camera Interface */
@@ -247,7 +246,7 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 	if (bytes_per_line < 0)
 		return bytes_per_line;
 
-	dev_dbg(icd->dev.parent, "count=%d, size=%d\n", *count, *size);
+	dev_dbg(icd->parent, "count=%d, size=%d\n", *count, *size);
 
 	*size = bytes_per_line * icd->user_height;
 
@@ -262,13 +261,13 @@ static int pxa_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 static void free_buffer(struct videobuf_queue *vq, struct pxa_buffer *buf)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
 	int i;
 
 	BUG_ON(in_interrupt());
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		&buf->vb, buf->vb.baddr, buf->vb.bsize);
 
 	/*
@@ -429,7 +428,7 @@ static int pxa_videobuf_prepare(struct videobuf_queue *vq,
 		struct videobuf_buffer *vb, enum v4l2_field field)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct device *dev = pcdev->soc_host.v4l2_dev.dev;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
@@ -636,11 +635,11 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq,
 			       struct videobuf_buffer *vb)
 {
 	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n",
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%08lx %d active=%p\n",
 		__func__, vb, vb->baddr, vb->bsize, pcdev->active);
 
 	list_add_tail(&vb->queue, &pcdev->capture);
@@ -658,7 +657,7 @@ static void pxa_videobuf_release(struct videobuf_queue *vq,
 	struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb);
 #ifdef DEBUG
 	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 
 	dev_dbg(dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 		vb, vb->baddr, vb->bsize);
@@ -843,7 +842,7 @@ static struct videobuf_queue_ops pxa_videobuf_ops = {
 static void pxa_camera_init_videobuf(struct videobuf_queue *q,
 			      struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 
 	/*
@@ -972,7 +971,7 @@ static irqreturn_t pxa_camera_irq(int irq, void *data)
  */
 static int pxa_camera_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 
 	if (pcdev->icd)
@@ -982,7 +981,7 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 
 	pcdev->icd = icd;
 
-	dev_info(icd->dev.parent, "PXA Camera driver attached to camera %d\n",
+	dev_info(icd->parent, "PXA Camera driver attached to camera %d\n",
 		 icd->devnum);
 
 	return 0;
@@ -991,12 +990,12 @@ static int pxa_camera_add_device(struct soc_camera_device *icd)
 /* Called with .video_lock held */
 static void pxa_camera_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 
 	BUG_ON(icd != pcdev->icd);
 
-	dev_info(icd->dev.parent, "PXA Camera driver detached from camera %d\n",
+	dev_info(icd->parent, "PXA Camera driver detached from camera %d\n",
 		 icd->devnum);
 
 	/* disable capture, disable interrupts */
@@ -1057,7 +1056,7 @@ static int test_platform_param(struct pxa_camera_dev *pcdev,
 static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
 				  unsigned long flags, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	unsigned long dw, bpp;
@@ -1152,7 +1151,7 @@ static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
 
 static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	unsigned long bus_flags, camera_flags, common_flags;
 	int ret;
@@ -1210,7 +1209,7 @@ static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 static int pxa_camera_try_bus_param(struct soc_camera_device *icd,
 				    unsigned char buswidth)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	unsigned long bus_flags, camera_flags;
 	int ret = test_platform_param(pcdev, buswidth, &bus_flags);
@@ -1247,7 +1246,7 @@ static int pxa_camera_get_formats(struct soc_camera_device *icd, unsigned int id
 				  struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	int formats = 0, ret;
 	struct pxa_cam *cam;
 	enum v4l2_mbus_pixelcode code;
@@ -1335,9 +1334,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 			       struct v4l2_crop *a)
 {
 	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	struct soc_camera_sense sense = {
 		.master_clock = pcdev->mclk,
@@ -1379,7 +1378,7 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 			return ret;
 
 		if (pxa_camera_check_frame(mf.width, mf.height)) {
-			dev_warn(icd->dev.parent,
+			dev_warn(icd->parent,
 				 "Inconsistent state. Use S_FMT to repair\n");
 			return -EINVAL;
 		}
@@ -1406,9 +1405,9 @@ static int pxa_camera_set_crop(struct soc_camera_device *icd,
 static int pxa_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
-	struct device *dev = icd->dev.parent;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate = NULL;
 	struct soc_camera_sense sense = {
@@ -1485,7 +1484,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1499,16 +1498,11 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 			      &pix->height, 32, 2048, 0,
 			      pixfmt == V4L2_PIX_FMT_YUV422P ? 4 : 0);
 
-	pix->bytesperline = soc_mbus_bytes_per_line(pix->width,
-						    xlate->host_fmt);
-	if (pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = pix->height * pix->bytesperline;
-
 	/* limit to sensor capabilities */
 	mf.width	= pix->width;
 	mf.height	= pix->height;
-	mf.field	= pix->field;
+	/* Only progressive video supported so far */
+	mf.field	= V4L2_FIELD_NONE;
 	mf.colorspace	= pix->colorspace;
 	mf.code		= xlate->code;
 
@@ -1527,7 +1521,7 @@ static int pxa_camera_try_fmt(struct soc_camera_device *icd,
 		break;
 	default:
 		/* TODO: support interlaced at least in pass-through mode */
-		dev_err(icd->dev.parent, "Field type %d unsupported.\n",
+		dev_err(icd->parent, "Field type %d unsupported.\n",
 			mf.field);
 		return -EINVAL;
 	}
@@ -1578,15 +1572,14 @@ static int pxa_camera_querycap(struct soc_camera_host *ici,
 {
 	/* cap->name is set by the firendly caller:-> */
 	strlcpy(cap->card, pxa_cam_driver_description, sizeof(cap->card));
-	cap->version = PXA_CAM_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 
 	return 0;
 }
 
-static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state)
+static int pxa_camera_suspend(struct device *dev)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	int i = 0, ret = 0;
 
@@ -1596,15 +1589,19 @@ static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state)
 	pcdev->save_cicr[i++] = __raw_readl(pcdev->base + CICR3);
 	pcdev->save_cicr[i++] = __raw_readl(pcdev->base + CICR4);
 
-	if ((pcdev->icd) && (pcdev->icd->ops->suspend))
-		ret = pcdev->icd->ops->suspend(pcdev->icd, state);
+	if (pcdev->icd) {
+		struct v4l2_subdev *sd = soc_camera_to_subdev(pcdev->icd);
+		ret = v4l2_subdev_call(sd, core, s_power, 0);
+		if (ret == -ENOIOCTLCMD)
+			ret = 0;
+	}
 
 	return ret;
 }
 
-static int pxa_camera_resume(struct soc_camera_device *icd)
+static int pxa_camera_resume(struct device *dev)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct pxa_camera_dev *pcdev = ici->priv;
 	int i = 0, ret = 0;
 
@@ -1618,8 +1615,12 @@ static int pxa_camera_resume(struct soc_camera_device *icd)
 	__raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR3);
 	__raw_writel(pcdev->save_cicr[i++], pcdev->base + CICR4);
 
-	if ((pcdev->icd) && (pcdev->icd->ops->resume))
-		ret = pcdev->icd->ops->resume(pcdev->icd);
+	if (pcdev->icd) {
+		struct v4l2_subdev *sd = soc_camera_to_subdev(pcdev->icd);
+		ret = v4l2_subdev_call(sd, core, s_power, 1);
+		if (ret == -ENOIOCTLCMD)
+			ret = 0;
+	}
 
 	/* Restart frame capture if active buffer exists */
 	if (!ret && pcdev->active)
@@ -1632,8 +1633,6 @@ static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= pxa_camera_add_device,
 	.remove		= pxa_camera_remove_device,
-	.suspend	= pxa_camera_suspend,
-	.resume		= pxa_camera_resume,
 	.set_crop	= pxa_camera_set_crop,
 	.get_formats	= pxa_camera_get_formats,
 	.put_formats	= pxa_camera_put_formats,
@@ -1818,9 +1817,15 @@ static int __devexit pxa_camera_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops pxa_camera_pm = {
+	.suspend	= pxa_camera_suspend,
+	.resume		= pxa_camera_resume,
+};
+
 static struct platform_driver pxa_camera_driver = {
 	.driver 	= {
 		.name	= PXA_CAM_DRV_NAME,
+		.pm	= &pxa_camera_pm,
 	},
 	.probe		= pxa_camera_probe,
 	.remove		= __devexit_p(pxa_camera_remove),
@@ -1843,4 +1848,5 @@ module_exit(pxa_camera_exit);
 MODULE_DESCRIPTION("PXA27x SoC Camera Host driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(PXA_CAM_VERSION);
 MODULE_ALIAS("platform:" PXA_CAM_DRV_NAME);
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 57e11b6f19f..847ccc067e8 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -1364,10 +1364,9 @@ static int rj54n1_video_probe(struct soc_camera_device *icd,
 	int data1, data2;
 	int ret;
 
-	/* This could be a BUG_ON() or a WARN_ON(), or remove it completely */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/* Read out the chip version register */
 	data1 = reg_read(client, RJ54N1_DEV_CODE);
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 5b9dce85645..803c9c82e49 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -16,15 +16,10 @@
  * Example maximum bandwidth utilization:
  *
  * -full size, color mode YUYV or YUV422P: 2 channels at once
- *
  * -full or half size Grey scale: all 4 channels at once
- *
  * -half size, color mode YUYV or YUV422P: all 4 channels at once
- *
  * -full size, color mode YUYV or YUV422P 1/2 frame rate: all 4 channels
  *  at once.
- *  (TODO: Incorporate videodev2 frame rate(FR) enumeration,
- *  which is currently experimental.)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -47,7 +42,6 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
@@ -56,12 +50,7 @@
 #include <linux/vmalloc.h>
 #include <linux/usb.h>
 
-#define S2255_MAJOR_VERSION	1
-#define S2255_MINOR_VERSION	21
-#define S2255_RELEASE		0
-#define S2255_VERSION		KERNEL_VERSION(S2255_MAJOR_VERSION, \
-					       S2255_MINOR_VERSION, \
-					       S2255_RELEASE)
+#define S2255_VERSION		"1.22.1"
 #define FIRMWARE_FILE_NAME "f2255usb.bin"
 
 /* default JPEG quality */
@@ -126,7 +115,7 @@
 #define MASK_COLOR       0x000000ff
 #define MASK_JPG_QUALITY 0x0000ff00
 #define MASK_INPUT_TYPE  0x000f0000
-/* frame decimation. Not implemented by V4L yet(experimental in V4L) */
+/* frame decimation. */
 #define FDEC_1		1	/* capture every frame. default */
 #define FDEC_2		2	/* capture every 2nd frame */
 #define FDEC_3		3	/* capture every 3rd frame */
@@ -312,9 +301,9 @@ struct s2255_fh {
 };
 
 /* current cypress EEPROM firmware version */
-#define S2255_CUR_USB_FWVER	((3 << 8) | 11)
+#define S2255_CUR_USB_FWVER	((3 << 8) | 12)
 /* current DSP FW version */
-#define S2255_CUR_DSP_FWVER     10102
+#define S2255_CUR_DSP_FWVER     10104
 /* Need DSP version 5+ for video status feature */
 #define S2255_MIN_DSP_STATUS      5
 #define S2255_MIN_DSP_COLORFILTER 8
@@ -502,7 +491,7 @@ static void planar422p_to_yuv_packed(const unsigned char *in,
 
 static void s2255_reset_dsppower(struct s2255_dev *dev)
 {
-	s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b01, NULL, 0, 1);
+	s2255_vendor_req(dev, 0x40, 0x0000, 0x0001, NULL, 0, 1);
 	msleep(10);
 	s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1);
 	msleep(600);
@@ -856,7 +845,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(cap->driver, "s2255", sizeof(cap->driver));
 	strlcpy(cap->card, "s2255", sizeof(cap->card));
 	usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info));
-	cap->version = S2255_VERSION;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1984,9 +1972,8 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 			  video_device_node_name(&channel->vdev));
 
 	}
-	printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n",
-	       S2255_MAJOR_VERSION,
-	       S2255_MINOR_VERSION);
+	printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %s\n",
+	       S2255_VERSION);
 	/* if no channels registered, return error and probe will fail*/
 	if (atomic_read(&dev->num_channels) == 0) {
 		v4l2_device_unregister(&dev->v4l2_dev);
@@ -2302,15 +2289,12 @@ static int s2255_board_init(struct s2255_dev *dev)
 	/* query the firmware */
 	fw_ver = s2255_get_fx2fw(dev);
 
-	printk(KERN_INFO "2255 usb firmware version %d.%d\n",
+	printk(KERN_INFO "s2255: usb firmware version %d.%d\n",
 	       (fw_ver >> 8) & 0xff,
 	       fw_ver & 0xff);
 
 	if (fw_ver < S2255_CUR_USB_FWVER)
-		dev_err(&dev->udev->dev,
-			"usb firmware not up to date %d.%d\n",
-			(fw_ver >> 8) & 0xff,
-			fw_ver & 0xff);
+		printk(KERN_INFO "s2255: newer USB firmware available\n");
 
 	for (j = 0; j < MAX_CHANNELS; j++) {
 		struct s2255_channel *channel = &dev->channel[j];
@@ -2721,3 +2705,4 @@ module_exit(usb_s2255_exit);
 MODULE_DESCRIPTION("Sensoray 2255 Video for Linux driver");
 MODULE_AUTHOR("Dean Anderson (Sensoray Company Inc.)");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(S2255_VERSION);
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 81b4a826ee5..0d730e55605 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
@@ -451,7 +450,6 @@ static int fimc_vidioc_querycap_capture(struct file *file, void *priv,
 	strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
 	strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
-	cap->version = KERNEL_VERSION(1, 0, 0);
 	cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
 			    V4L2_CAP_VIDEO_CAPTURE_MPLANE;
 
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index bdf19ada917..aa550666cc0 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
@@ -774,7 +773,6 @@ static int fimc_m2m_querycap(struct file *file, void *priv,
 	strncpy(cap->driver, fimc->pdev->name, sizeof(cap->driver) - 1);
 	strncpy(cap->card, fimc->pdev->name, sizeof(cap->card) - 1);
 	cap->bus_info[0] = 0;
-	cap->version = KERNEL_VERSION(1, 0, 0);
 	cap->capabilities = V4L2_CAP_STREAMING |
 		V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT |
 		V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE;
@@ -1937,3 +1935,4 @@ module_exit(fimc_exit);
 MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
 MODULE_DESCRIPTION("S5P FIMC camera host interface/video postprocessor driver");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.1");
diff --git a/drivers/media/video/s5p-mfc/Makefile b/drivers/media/video/s5p-mfc/Makefile
new file mode 100644
index 00000000000..d0663409af0
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o
+s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o s5p_mfc_opr.o
+s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o
+s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_cmd.o
+s5p-mfc-y += s5p_mfc_pm.o s5p_mfc_shm.o
diff --git a/drivers/media/video/s5p-mfc/regs-mfc.h b/drivers/media/video/s5p-mfc/regs-mfc.h
new file mode 100644
index 00000000000..053a8a872fd
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/regs-mfc.h
@@ -0,0 +1,413 @@
+/*
+ * Register definition file for Samsung MFC V5.1 Interface (FIMV) driver
+ *
+ * Kamil Debski, Copyright (c) 2010 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _REGS_FIMV_H
+#define _REGS_FIMV_H
+
+#define S5P_FIMV_REG_SIZE	(S5P_FIMV_END_ADDR - S5P_FIMV_START_ADDR)
+#define S5P_FIMV_REG_COUNT	((S5P_FIMV_END_ADDR - S5P_FIMV_START_ADDR) / 4)
+
+/* Number of bits that the buffer address should be shifted for particular
+ * MFC buffers.  */
+#define S5P_FIMV_START_ADDR		0x0000
+#define S5P_FIMV_END_ADDR		0xe008
+
+#define S5P_FIMV_SW_RESET		0x0000
+#define S5P_FIMV_RISC_HOST_INT		0x0008
+
+/* Command from HOST to RISC */
+#define S5P_FIMV_HOST2RISC_CMD		0x0030
+#define S5P_FIMV_HOST2RISC_ARG1		0x0034
+#define S5P_FIMV_HOST2RISC_ARG2		0x0038
+#define S5P_FIMV_HOST2RISC_ARG3		0x003c
+#define S5P_FIMV_HOST2RISC_ARG4		0x0040
+
+/* Command from RISC to HOST */
+#define S5P_FIMV_RISC2HOST_CMD		0x0044
+#define S5P_FIMV_RISC2HOST_CMD_MASK	0x1FFFF
+#define S5P_FIMV_RISC2HOST_ARG1		0x0048
+#define S5P_FIMV_RISC2HOST_ARG2		0x004c
+#define S5P_FIMV_RISC2HOST_ARG3		0x0050
+#define S5P_FIMV_RISC2HOST_ARG4		0x0054
+
+#define S5P_FIMV_FW_VERSION		0x0058
+#define S5P_FIMV_SYS_MEM_SZ		0x005c
+#define S5P_FIMV_FW_STATUS		0x0080
+
+/* Memory controller register */
+#define S5P_FIMV_MC_DRAMBASE_ADR_A	0x0508
+#define S5P_FIMV_MC_DRAMBASE_ADR_B	0x050c
+#define S5P_FIMV_MC_STATUS		0x0510
+
+/* Common register */
+#define S5P_FIMV_COMMON_BASE_A		0x0600
+#define S5P_FIMV_COMMON_BASE_B		0x0700
+
+/* Decoder */
+#define S5P_FIMV_DEC_CHROMA_ADR		(S5P_FIMV_COMMON_BASE_A)
+#define S5P_FIMV_DEC_LUMA_ADR		(S5P_FIMV_COMMON_BASE_B)
+
+/* H.264 decoding */
+#define S5P_FIMV_H264_VERT_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+					/* vertical neighbor motion vector */
+#define S5P_FIMV_H264_NB_IP_ADR		(S5P_FIMV_COMMON_BASE_A + 0x90)
+					/* neighbor pixels for intra pred */
+#define S5P_FIMV_H264_MV_ADR		(S5P_FIMV_COMMON_BASE_B + 0x80)
+					/* H264 motion vector */
+
+/* MPEG4 decoding */
+#define S5P_FIMV_MPEG4_NB_DCAC_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+					/* neighbor AC/DC coeff. */
+#define S5P_FIMV_MPEG4_UP_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x90)
+					/* upper neighbor motion vector */
+#define S5P_FIMV_MPEG4_SA_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x94)
+					/* subseq. anchor motion vector */
+#define S5P_FIMV_MPEG4_OT_LINE_ADR	(S5P_FIMV_COMMON_BASE_A + 0x98)
+					/* overlap transform line */
+#define S5P_FIMV_MPEG4_SP_ADR		(S5P_FIMV_COMMON_BASE_A + 0xa8)
+					/* syntax parser */
+
+/* H.263 decoding */
+#define S5P_FIMV_H263_NB_DCAC_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+#define S5P_FIMV_H263_UP_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x90)
+#define S5P_FIMV_H263_SA_MV_ADR		(S5P_FIMV_COMMON_BASE_A + 0x94)
+#define S5P_FIMV_H263_OT_LINE_ADR	(S5P_FIMV_COMMON_BASE_A + 0x98)
+
+/* VC-1 decoding */
+#define S5P_FIMV_VC1_NB_DCAC_ADR	(S5P_FIMV_COMMON_BASE_A + 0x8c)
+#define S5P_FIMV_VC1_UP_NB_MV_ADR	(S5P_FIMV_COMMON_BASE_A + 0x90)
+#define S5P_FIMV_VC1_SA_MV_ADR		(S5P_FIMV_COMMON_BASE_A + 0x94)
+#define S5P_FIMV_VC1_OT_LINE_ADR	(S5P_FIMV_COMMON_BASE_A + 0x98)
+#define S5P_FIMV_VC1_BITPLANE3_ADR	(S5P_FIMV_COMMON_BASE_A + 0x9c)
+					/* bitplane3 */
+#define S5P_FIMV_VC1_BITPLANE2_ADR	(S5P_FIMV_COMMON_BASE_A + 0xa0)
+					/* bitplane2 */
+#define S5P_FIMV_VC1_BITPLANE1_ADR	(S5P_FIMV_COMMON_BASE_A + 0xa4)
+					/* bitplane1 */
+
+/* Encoder */
+#define S5P_FIMV_ENC_REF0_LUMA_ADR	(S5P_FIMV_COMMON_BASE_A + 0x1c)
+#define S5P_FIMV_ENC_REF1_LUMA_ADR	(S5P_FIMV_COMMON_BASE_A + 0x20)
+					/* reconstructed luma */
+#define S5P_FIMV_ENC_REF0_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B)
+#define S5P_FIMV_ENC_REF1_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x04)
+					/* reconstructed chroma */
+#define S5P_FIMV_ENC_REF2_LUMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x10)
+#define S5P_FIMV_ENC_REF2_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x08)
+#define S5P_FIMV_ENC_REF3_LUMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x14)
+#define S5P_FIMV_ENC_REF3_CHROMA_ADR	(S5P_FIMV_COMMON_BASE_B + 0x0c)
+
+/* H.264 encoding */
+#define S5P_FIMV_H264_UP_MV_ADR		(S5P_FIMV_COMMON_BASE_A)
+					/* upper motion vector */
+#define S5P_FIMV_H264_NBOR_INFO_ADR	(S5P_FIMV_COMMON_BASE_A + 0x04)
+					/* entropy engine's neighbor info. */
+#define S5P_FIMV_H264_UP_INTRA_MD_ADR	(S5P_FIMV_COMMON_BASE_A + 0x08)
+					/* upper intra MD */
+#define S5P_FIMV_H264_COZERO_FLAG_ADR	(S5P_FIMV_COMMON_BASE_A + 0x10)
+					/* direct cozero flag */
+#define S5P_FIMV_H264_UP_INTRA_PRED_ADR	(S5P_FIMV_COMMON_BASE_B + 0x40)
+					/* upper intra PRED */
+
+/* H.263 encoding */
+#define S5P_FIMV_H263_UP_MV_ADR		(S5P_FIMV_COMMON_BASE_A)
+					/* upper motion vector */
+#define S5P_FIMV_H263_ACDC_COEF_ADR	(S5P_FIMV_COMMON_BASE_A + 0x04)
+					/* upper Q coeff. */
+
+/* MPEG4 encoding */
+#define S5P_FIMV_MPEG4_UP_MV_ADR	(S5P_FIMV_COMMON_BASE_A)
+					/* upper motion vector */
+#define S5P_FIMV_MPEG4_ACDC_COEF_ADR	(S5P_FIMV_COMMON_BASE_A + 0x04)
+					/* upper Q coeff. */
+#define S5P_FIMV_MPEG4_COZERO_FLAG_ADR	(S5P_FIMV_COMMON_BASE_A + 0x10)
+					/* direct cozero flag */
+
+#define S5P_FIMV_ENC_REF_B_LUMA_ADR     0x062c /* ref B Luma addr */
+#define S5P_FIMV_ENC_REF_B_CHROMA_ADR   0x0630 /* ref B Chroma addr */
+
+#define S5P_FIMV_ENC_CUR_LUMA_ADR	0x0718 /* current Luma addr */
+#define S5P_FIMV_ENC_CUR_CHROMA_ADR	0x071C /* current Chroma addr */
+
+/* Codec common register */
+#define S5P_FIMV_ENC_HSIZE_PX		0x0818 /* frame width at encoder */
+#define S5P_FIMV_ENC_VSIZE_PX		0x081c /* frame height at encoder */
+#define S5P_FIMV_ENC_PROFILE		0x0830 /* profile register */
+#define S5P_FIMV_ENC_PROFILE_H264_MAIN			0
+#define S5P_FIMV_ENC_PROFILE_H264_HIGH			1
+#define S5P_FIMV_ENC_PROFILE_H264_BASELINE		2
+#define S5P_FIMV_ENC_PROFILE_MPEG4_SIMPLE		0
+#define S5P_FIMV_ENC_PROFILE_MPEG4_ADVANCED_SIMPLE	1
+#define S5P_FIMV_ENC_PIC_STRUCT		0x083c /* picture field/frame flag */
+#define S5P_FIMV_ENC_LF_CTRL		0x0848 /* loop filter control */
+#define S5P_FIMV_ENC_ALPHA_OFF		0x084c /* loop filter alpha offset */
+#define S5P_FIMV_ENC_BETA_OFF		0x0850 /* loop filter beta offset */
+#define S5P_FIMV_MR_BUSIF_CTRL		0x0854 /* hidden, bus interface ctrl */
+#define S5P_FIMV_ENC_PXL_CACHE_CTRL	0x0a00 /* pixel cache control */
+
+/* Channel & stream interface register */
+#define S5P_FIMV_SI_RTN_CHID		0x2000 /* Return CH inst ID register */
+#define S5P_FIMV_SI_CH0_INST_ID		0x2040 /* codec instance ID */
+#define S5P_FIMV_SI_CH1_INST_ID		0x2080 /* codec instance ID */
+/* Decoder */
+#define S5P_FIMV_SI_VRESOL		0x2004 /* vertical res of decoder */
+#define S5P_FIMV_SI_HRESOL		0x2008 /* horizontal res of decoder */
+#define S5P_FIMV_SI_BUF_NUMBER		0x200c /* number of frames in the
+								decoded pic */
+#define S5P_FIMV_SI_DISPLAY_Y_ADR	0x2010 /* luma addr of displayed pic */
+#define S5P_FIMV_SI_DISPLAY_C_ADR	0x2014 /* chroma addrof displayed pic */
+#define S5P_FIMV_SI_CONSUMED_BYTES	0x2018 /* Consumed number of bytes to
+							decode a frame */
+#define S5P_FIMV_SI_DISPLAY_STATUS	0x201c /* status of decoded picture */
+
+#define S5P_FIMV_SI_CH0_SB_ST_ADR	0x2044 /* start addr of stream buf */
+#define S5P_FIMV_SI_CH0_SB_FRM_SIZE	0x2048 /* size of stream buf */
+#define S5P_FIMV_SI_CH0_DESC_ADR	0x204c /* addr of descriptor buf */
+#define S5P_FIMV_SI_CH0_CPB_SIZE	0x2058 /* max size of coded pic. buf */
+#define S5P_FIMV_SI_CH0_DESC_SIZE	0x205c /* max size of descriptor buf */
+
+#define S5P_FIMV_SI_CH1_SB_ST_ADR	0x2084 /* start addr of stream buf */
+#define S5P_FIMV_SI_CH1_SB_FRM_SIZE	0x2088 /* size of stream buf */
+#define S5P_FIMV_SI_CH1_DESC_ADR	0x208c /* addr of descriptor buf */
+#define S5P_FIMV_SI_CH1_CPB_SIZE	0x2098 /* max size of coded pic. buf */
+#define S5P_FIMV_SI_CH1_DESC_SIZE	0x209c /* max size of descriptor buf */
+
+#define S5P_FIMV_CRC_LUMA0		0x2030 /* luma crc data per frame
+								(top field) */
+#define S5P_FIMV_CRC_CHROMA0		0x2034 /* chroma crc data per frame
+								(top field) */
+#define S5P_FIMV_CRC_LUMA1		0x2038 /* luma crc data per bottom
+								field */
+#define S5P_FIMV_CRC_CHROMA1		0x203c /* chroma crc data per bottom
+								field */
+
+/* Display status */
+#define S5P_FIMV_DEC_STATUS_DECODING_ONLY		0
+#define S5P_FIMV_DEC_STATUS_DECODING_DISPLAY		1
+#define S5P_FIMV_DEC_STATUS_DISPLAY_ONLY		2
+#define S5P_FIMV_DEC_STATUS_DECODING_EMPTY		3
+#define S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK	7
+#define S5P_FIMV_DEC_STATUS_PROGRESSIVE			(0<<3)
+#define S5P_FIMV_DEC_STATUS_INTERLACE			(1<<3)
+#define S5P_FIMV_DEC_STATUS_INTERLACE_MASK		(1<<3)
+#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_TWO		(0<<4)
+#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_FOUR		(1<<4)
+#define S5P_FIMV_DEC_STATUS_CRC_NUMBER_MASK		(1<<4)
+#define S5P_FIMV_DEC_STATUS_CRC_GENERATED		(1<<5)
+#define S5P_FIMV_DEC_STATUS_CRC_NOT_GENERATED		(0<<5)
+#define S5P_FIMV_DEC_STATUS_CRC_MASK			(1<<5)
+
+#define S5P_FIMV_DEC_STATUS_RESOLUTION_MASK		(3<<4)
+#define S5P_FIMV_DEC_STATUS_RESOLUTION_INC		(1<<4)
+#define S5P_FIMV_DEC_STATUS_RESOLUTION_DEC		(2<<4)
+
+/* Decode frame address */
+#define S5P_FIMV_DECODE_Y_ADR			0x2024
+#define S5P_FIMV_DECODE_C_ADR			0x2028
+
+/* Decoded frame tpe */
+#define S5P_FIMV_DECODE_FRAME_TYPE		0x2020
+#define S5P_FIMV_DECODE_FRAME_MASK		7
+
+#define S5P_FIMV_DECODE_FRAME_SKIPPED		0
+#define S5P_FIMV_DECODE_FRAME_I_FRAME		1
+#define S5P_FIMV_DECODE_FRAME_P_FRAME		2
+#define S5P_FIMV_DECODE_FRAME_B_FRAME		3
+#define S5P_FIMV_DECODE_FRAME_OTHER_FRAME	4
+
+/* Sizes of buffers required for decoding */
+#define S5P_FIMV_DEC_NB_IP_SIZE			(32 * 1024)
+#define S5P_FIMV_DEC_VERT_NB_MV_SIZE		(16 * 1024)
+#define S5P_FIMV_DEC_NB_DCAC_SIZE		(16 * 1024)
+#define S5P_FIMV_DEC_UPNB_MV_SIZE		(68 * 1024)
+#define S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE		(136 * 1024)
+#define S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE     (32 * 1024)
+#define S5P_FIMV_DEC_VC1_BITPLANE_SIZE		(2 * 1024)
+#define S5P_FIMV_DEC_STX_PARSER_SIZE		(68 * 1024)
+
+#define S5P_FIMV_DEC_BUF_ALIGN			(8 * 1024)
+#define S5P_FIMV_ENC_BUF_ALIGN			(8 * 1024)
+#define S5P_FIMV_NV12M_HALIGN			16
+#define S5P_FIMV_NV12M_LVALIGN			16
+#define S5P_FIMV_NV12M_CVALIGN			8
+#define S5P_FIMV_NV12MT_HALIGN			128
+#define S5P_FIMV_NV12MT_VALIGN			32
+#define S5P_FIMV_NV12M_SALIGN			2048
+#define S5P_FIMV_NV12MT_SALIGN			8192
+
+/* Sizes of buffers required for encoding */
+#define S5P_FIMV_ENC_UPMV_SIZE		0x10000
+#define S5P_FIMV_ENC_COLFLG_SIZE	0x10000
+#define S5P_FIMV_ENC_INTRAMD_SIZE	0x10000
+#define S5P_FIMV_ENC_INTRAPRED_SIZE	0x4000
+#define S5P_FIMV_ENC_NBORINFO_SIZE	0x10000
+#define S5P_FIMV_ENC_ACDCCOEF_SIZE	0x10000
+
+/* Encoder */
+#define S5P_FIMV_ENC_SI_STRM_SIZE	0x2004 /* stream size */
+#define S5P_FIMV_ENC_SI_PIC_CNT		0x2008 /* picture count */
+#define S5P_FIMV_ENC_SI_WRITE_PTR	0x200c /* write pointer */
+#define S5P_FIMV_ENC_SI_SLICE_TYPE	0x2010 /* slice type(I/P/B/IDR) */
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_NON_CODED	0
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_I		1
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_P		2
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_B		3
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_SKIPPED	4
+#define S5P_FIMV_ENC_SI_SLICE_TYPE_OTHERS	5
+#define S5P_FIMV_ENCODED_Y_ADDR         0x2014 /* the addr of the encoded
+								luma pic */
+#define S5P_FIMV_ENCODED_C_ADDR         0x2018 /* the addr of the encoded
+								chroma pic */
+
+#define S5P_FIMV_ENC_SI_CH0_SB_ADR	0x2044 /* addr of stream buf */
+#define S5P_FIMV_ENC_SI_CH0_SB_SIZE	0x204c /* size of stream buf */
+#define S5P_FIMV_ENC_SI_CH0_CUR_Y_ADR	0x2050 /* current Luma addr */
+#define S5P_FIMV_ENC_SI_CH0_CUR_C_ADR	0x2054 /* current Chroma addr */
+#define S5P_FIMV_ENC_SI_CH0_FRAME_INS	0x2058 /* frame insertion */
+
+#define S5P_FIMV_ENC_SI_CH1_SB_ADR	0x2084 /* addr of stream buf */
+#define S5P_FIMV_ENC_SI_CH1_SB_SIZE	0x208c /* size of stream buf */
+#define S5P_FIMV_ENC_SI_CH1_CUR_Y_ADR	0x2090 /* current Luma addr */
+#define S5P_FIMV_ENC_SI_CH1_CUR_C_ADR	0x2094 /* current Chroma addr */
+#define S5P_FIMV_ENC_SI_CH1_FRAME_INS	0x2098 /* frame insertion */
+
+#define S5P_FIMV_ENC_PIC_TYPE_CTRL	0xc504 /* pic type level control */
+#define S5P_FIMV_ENC_B_RECON_WRITE_ON	0xc508 /* B frame recon write ctrl */
+#define S5P_FIMV_ENC_MSLICE_CTRL	0xc50c /* multi slice control */
+#define S5P_FIMV_ENC_MSLICE_MB		0xc510 /* MB number in the one slice */
+#define S5P_FIMV_ENC_MSLICE_BIT		0xc514 /* bit count for one slice */
+#define S5P_FIMV_ENC_CIR_CTRL		0xc518 /* number of intra refresh MB */
+#define S5P_FIMV_ENC_MAP_FOR_CUR	0xc51c /* linear or tiled mode */
+#define S5P_FIMV_ENC_PADDING_CTRL	0xc520 /* padding control */
+
+#define S5P_FIMV_ENC_RC_CONFIG		0xc5a0 /* RC config */
+#define S5P_FIMV_ENC_RC_BIT_RATE	0xc5a8 /* bit rate */
+#define S5P_FIMV_ENC_RC_QBOUND		0xc5ac /* max/min QP */
+#define S5P_FIMV_ENC_RC_RPARA		0xc5b0 /* rate control reaction coeff */
+#define S5P_FIMV_ENC_RC_MB_CTRL		0xc5b4 /* MB adaptive scaling */
+
+/* Encoder for H264 only */
+#define S5P_FIMV_ENC_H264_ENTROPY_MODE	0xd004 /* CAVLC or CABAC */
+#define S5P_FIMV_ENC_H264_ALPHA_OFF	0xd008 /* loop filter alpha offset */
+#define S5P_FIMV_ENC_H264_BETA_OFF	0xd00c /* loop filter beta offset */
+#define S5P_FIMV_ENC_H264_NUM_OF_REF	0xd010 /* number of reference for P/B */
+#define S5P_FIMV_ENC_H264_TRANS_FLAG	0xd034 /* 8x8 transform flag in PPS &
+								high profile */
+
+#define S5P_FIMV_ENC_RC_FRAME_RATE	0xd0d0 /* frame rate */
+
+/* Encoder for MPEG4 only */
+#define S5P_FIMV_ENC_MPEG4_QUART_PXL	0xe008 /* qpel interpolation ctrl */
+
+/* Additional */
+#define S5P_FIMV_SI_CH0_DPB_CONF_CTRL   0x2068 /* DPB Config Control Register */
+#define S5P_FIMV_SLICE_INT_MASK		1
+#define S5P_FIMV_SLICE_INT_SHIFT	31
+#define S5P_FIMV_DDELAY_ENA_SHIFT	30
+#define S5P_FIMV_DDELAY_VAL_MASK	0xff
+#define S5P_FIMV_DDELAY_VAL_SHIFT	16
+#define S5P_FIMV_DPB_COUNT_MASK		0xffff
+#define S5P_FIMV_DPB_FLUSH_MASK		1
+#define S5P_FIMV_DPB_FLUSH_SHIFT	14
+
+
+#define S5P_FIMV_SI_CH0_RELEASE_BUF     0x2060 /* DPB release buffer register */
+#define S5P_FIMV_SI_CH0_HOST_WR_ADR	0x2064 /* address of shared memory */
+
+/* Codec numbers  */
+#define S5P_FIMV_CODEC_NONE		-1
+
+#define S5P_FIMV_CODEC_H264_DEC		0
+#define S5P_FIMV_CODEC_VC1_DEC		1
+#define S5P_FIMV_CODEC_MPEG4_DEC	2
+#define S5P_FIMV_CODEC_MPEG2_DEC	3
+#define S5P_FIMV_CODEC_H263_DEC		4
+#define S5P_FIMV_CODEC_VC1RCV_DEC	5
+
+#define S5P_FIMV_CODEC_H264_ENC		16
+#define S5P_FIMV_CODEC_MPEG4_ENC	17
+#define S5P_FIMV_CODEC_H263_ENC		18
+
+/* Channel Control Register */
+#define S5P_FIMV_CH_SEQ_HEADER		1
+#define S5P_FIMV_CH_FRAME_START		2
+#define S5P_FIMV_CH_LAST_FRAME		3
+#define S5P_FIMV_CH_INIT_BUFS		4
+#define S5P_FIMV_CH_FRAME_START_REALLOC	5
+#define S5P_FIMV_CH_MASK		7
+#define S5P_FIMV_CH_SHIFT		16
+
+
+/* Host to RISC command */
+#define S5P_FIMV_H2R_CMD_EMPTY		0
+#define S5P_FIMV_H2R_CMD_OPEN_INSTANCE	1
+#define S5P_FIMV_H2R_CMD_CLOSE_INSTANCE	2
+#define S5P_FIMV_H2R_CMD_SYS_INIT	3
+#define S5P_FIMV_H2R_CMD_FLUSH		4
+#define S5P_FIMV_H2R_CMD_SLEEP		5
+#define S5P_FIMV_H2R_CMD_WAKEUP		6
+
+#define S5P_FIMV_R2H_CMD_EMPTY			0
+#define S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET	1
+#define S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET	2
+#define S5P_FIMV_R2H_CMD_RSV_RET		3
+#define S5P_FIMV_R2H_CMD_SEQ_DONE_RET		4
+#define S5P_FIMV_R2H_CMD_FRAME_DONE_RET		5
+#define S5P_FIMV_R2H_CMD_SLICE_DONE_RET		6
+#define S5P_FIMV_R2H_CMD_ENC_COMPLETE_RET	7
+#define S5P_FIMV_R2H_CMD_SYS_INIT_RET		8
+#define S5P_FIMV_R2H_CMD_FW_STATUS_RET		9
+#define S5P_FIMV_R2H_CMD_SLEEP_RET		10
+#define S5P_FIMV_R2H_CMD_WAKEUP_RET		11
+#define S5P_FIMV_R2H_CMD_FLUSH_RET		12
+#define S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET	15
+#define S5P_FIMV_R2H_CMD_EDFU_INIT_RET		16
+#define S5P_FIMV_R2H_CMD_ERR_RET		32
+
+/* Error handling defines */
+#define S5P_FIMV_ERR_WARNINGS_START		145
+#define S5P_FIMV_ERR_DEC_MASK			0xFFFF
+#define S5P_FIMV_ERR_DEC_SHIFT			0
+#define S5P_FIMV_ERR_DSPL_MASK			0xFFFF0000
+#define S5P_FIMV_ERR_DSPL_SHIFT			16
+
+/* Shared memory registers' offsets */
+
+/* An offset of the start position in the stream when
+ * the start position is not aligned */
+#define S5P_FIMV_SHARED_CROP_INFO_H		0x0020
+#define S5P_FIMV_SHARED_CROP_LEFT_MASK		0xFFFF
+#define S5P_FIMV_SHARED_CROP_LEFT_SHIFT		0
+#define S5P_FIMV_SHARED_CROP_RIGHT_MASK		0xFFFF0000
+#define S5P_FIMV_SHARED_CROP_RIGHT_SHIFT	16
+#define S5P_FIMV_SHARED_CROP_INFO_V		0x0024
+#define S5P_FIMV_SHARED_CROP_TOP_MASK		0xFFFF
+#define S5P_FIMV_SHARED_CROP_TOP_SHIFT		0
+#define S5P_FIMV_SHARED_CROP_BOTTOM_MASK	0xFFFF0000
+#define S5P_FIMV_SHARED_CROP_BOTTOM_SHIFT	16
+#define S5P_FIMV_SHARED_SET_FRAME_TAG		0x0004
+#define S5P_FIMV_SHARED_GET_FRAME_TAG_TOP	0x0008
+#define S5P_FIMV_SHARED_GET_FRAME_TAG_BOT	0x000C
+#define S5P_FIMV_SHARED_START_BYTE_NUM		0x0018
+#define S5P_FIMV_SHARED_RC_VOP_TIMING		0x0030
+#define S5P_FIMV_SHARED_LUMA_DPB_SIZE		0x0064
+#define S5P_FIMV_SHARED_CHROMA_DPB_SIZE		0x0068
+#define S5P_FIMV_SHARED_MV_SIZE			0x006C
+#define S5P_FIMV_SHARED_PIC_TIME_TOP		0x0010
+#define S5P_FIMV_SHARED_PIC_TIME_BOTTOM		0x0014
+#define S5P_FIMV_SHARED_EXT_ENC_CONTROL		0x0028
+#define S5P_FIMV_SHARED_P_B_FRAME_QP		0x0070
+#define S5P_FIMV_SHARED_ASPECT_RATIO_IDC	0x0074
+#define S5P_FIMV_SHARED_EXTENDED_SAR		0x0078
+#define S5P_FIMV_SHARED_H264_I_PERIOD		0x009C
+#define S5P_FIMV_SHARED_RC_CONTROL_CONFIG	0x00A0
+
+#endif /* _REGS_FIMV_H */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc.c b/drivers/media/video/s5p-mfc/s5p_mfc.c
new file mode 100644
index 00000000000..7dc7eab58b3
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc.c
@@ -0,0 +1,1274 @@
+/*
+ * Samsung S5P Multi Format Codec v 5.1
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Kamil Debski, <k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/videobuf2-core.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_ctrl.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_dec.h"
+#include "s5p_mfc_enc.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+#include "s5p_mfc_pm.h"
+#include "s5p_mfc_shm.h"
+
+#define S5P_MFC_NAME		"s5p-mfc"
+#define S5P_MFC_DEC_NAME	"s5p-mfc-dec"
+#define S5P_MFC_ENC_NAME	"s5p-mfc-enc"
+
+int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level - higher value produces more verbose messages");
+
+/* Helper functions for interrupt processing */
+/* Remove from hw execution round robin */
+static void clear_work_bit(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	spin_lock(&dev->condlock);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock(&dev->condlock);
+}
+
+/* Wake up context wait_queue */
+static void wake_up_ctx(struct s5p_mfc_ctx *ctx, unsigned int reason,
+			unsigned int err)
+{
+	ctx->int_cond = 1;
+	ctx->int_type = reason;
+	ctx->int_err = err;
+	wake_up(&ctx->queue);
+}
+
+/* Wake up device wait_queue */
+static void wake_up_dev(struct s5p_mfc_dev *dev, unsigned int reason,
+			unsigned int err)
+{
+	dev->int_cond = 1;
+	dev->int_type = reason;
+	dev->int_err = err;
+	wake_up(&dev->queue);
+}
+
+void s5p_mfc_watchdog(unsigned long arg)
+{
+	struct s5p_mfc_dev *dev = (struct s5p_mfc_dev *)arg;
+
+	if (test_bit(0, &dev->hw_lock))
+		atomic_inc(&dev->watchdog_cnt);
+	if (atomic_read(&dev->watchdog_cnt) >= MFC_WATCHDOG_CNT) {
+		/* This means that hw is busy and no interrupts were
+		 * generated by hw for the Nth time of running this
+		 * watchdog timer. This usually means a serious hw
+		 * error. Now it is time to kill all instances and
+		 * reset the MFC. */
+		mfc_err("Time out during waiting for HW\n");
+		queue_work(dev->watchdog_workqueue, &dev->watchdog_work);
+	}
+	dev->watchdog_timer.expires = jiffies +
+					msecs_to_jiffies(MFC_WATCHDOG_INTERVAL);
+	add_timer(&dev->watchdog_timer);
+}
+
+static void s5p_mfc_watchdog_worker(struct work_struct *work)
+{
+	struct s5p_mfc_dev *dev;
+	struct s5p_mfc_ctx *ctx;
+	unsigned long flags;
+	int mutex_locked;
+	int i, ret;
+
+	dev = container_of(work, struct s5p_mfc_dev, watchdog_work);
+
+	mfc_err("Driver timeout error handling\n");
+	/* Lock the mutex that protects open and release.
+	 * This is necessary as they may load and unload firmware. */
+	mutex_locked = mutex_trylock(&dev->mfc_mutex);
+	if (!mutex_locked)
+		mfc_err("Error: some instance may be closing/opening\n");
+	spin_lock_irqsave(&dev->irqlock, flags);
+
+	s5p_mfc_clock_off();
+
+	for (i = 0; i < MFC_NUM_CONTEXTS; i++) {
+		ctx = dev->ctx[i];
+		if (!ctx)
+			continue;
+		ctx->state = MFCINST_ERROR;
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		clear_work_bit(ctx);
+		wake_up_ctx(ctx, S5P_FIMV_R2H_CMD_ERR_RET, 0);
+	}
+	clear_bit(0, &dev->hw_lock);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	/* Double check if there is at least one instance running.
+	 * If no instance is in memory than no firmware should be present */
+	if (dev->num_inst > 0) {
+		ret = s5p_mfc_reload_firmware(dev);
+		if (ret) {
+			mfc_err("Failed to reload FW\n");
+			goto unlock;
+		}
+		s5p_mfc_clock_on();
+		ret = s5p_mfc_init_hw(dev);
+		if (ret)
+			mfc_err("Failed to reinit FW\n");
+	}
+unlock:
+	if (mutex_locked)
+		mutex_unlock(&dev->mfc_mutex);
+}
+
+static enum s5p_mfc_node_type s5p_mfc_get_node_type(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	if (!vdev) {
+		mfc_err("failed to get video_device");
+		return MFCNODE_INVALID;
+	}
+	if (vdev->index == 0)
+		return MFCNODE_DECODER;
+	else if (vdev->index == 1)
+		return MFCNODE_ENCODER;
+	return MFCNODE_INVALID;
+}
+
+static void s5p_mfc_clear_int_flags(struct s5p_mfc_dev *dev)
+{
+	mfc_write(dev, 0, S5P_FIMV_RISC_HOST_INT);
+	mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
+	mfc_write(dev, 0xffff, S5P_FIMV_SI_RTN_CHID);
+}
+
+static void s5p_mfc_handle_frame_all_extracted(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_buf *dst_buf;
+
+	ctx->state = MFCINST_FINISHED;
+	ctx->sequence++;
+	while (!list_empty(&ctx->dst_queue)) {
+		dst_buf = list_entry(ctx->dst_queue.next,
+				     struct s5p_mfc_buf, list);
+		mfc_debug(2, "Cleaning up buffer: %d\n",
+					  dst_buf->b->v4l2_buf.index);
+		vb2_set_plane_payload(dst_buf->b, 0, 0);
+		vb2_set_plane_payload(dst_buf->b, 1, 0);
+		list_del(&dst_buf->list);
+		ctx->dst_queue_cnt--;
+		dst_buf->b->v4l2_buf.sequence = (ctx->sequence++);
+
+		if (s5p_mfc_read_shm(ctx, PIC_TIME_TOP) ==
+			s5p_mfc_read_shm(ctx, PIC_TIME_BOT))
+			dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE;
+		else
+			dst_buf->b->v4l2_buf.field = V4L2_FIELD_INTERLACED;
+
+		ctx->dec_dst_flag &= ~(1 << dst_buf->b->v4l2_buf.index);
+		vb2_buffer_done(dst_buf->b, VB2_BUF_STATE_DONE);
+	}
+}
+
+static void s5p_mfc_handle_frame_copy_time(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf  *dst_buf, *src_buf;
+	size_t dec_y_addr = s5p_mfc_get_dec_y_adr();
+	unsigned int frame_type = s5p_mfc_get_frame_type();
+
+	/* Copy timestamp / timecode from decoded src to dst and set
+	   appropraite flags */
+	src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
+		if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dec_y_addr) {
+			memcpy(&dst_buf->b->v4l2_buf.timecode,
+				&src_buf->b->v4l2_buf.timecode,
+				sizeof(struct v4l2_timecode));
+			memcpy(&dst_buf->b->v4l2_buf.timestamp,
+				&src_buf->b->v4l2_buf.timestamp,
+				sizeof(struct timeval));
+			switch (frame_type) {
+			case S5P_FIMV_DECODE_FRAME_I_FRAME:
+				dst_buf->b->v4l2_buf.flags |=
+						V4L2_BUF_FLAG_KEYFRAME;
+				break;
+			case S5P_FIMV_DECODE_FRAME_P_FRAME:
+				dst_buf->b->v4l2_buf.flags |=
+						V4L2_BUF_FLAG_PFRAME;
+				break;
+			case S5P_FIMV_DECODE_FRAME_B_FRAME:
+				dst_buf->b->v4l2_buf.flags |=
+						V4L2_BUF_FLAG_BFRAME;
+				break;
+			}
+			break;
+		}
+	}
+}
+
+static void s5p_mfc_handle_frame_new(struct s5p_mfc_ctx *ctx, unsigned int err)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf  *dst_buf;
+	size_t dspl_y_addr = s5p_mfc_get_dspl_y_adr();
+	unsigned int frame_type = s5p_mfc_get_frame_type();
+	unsigned int index;
+
+	/* If frame is same as previous then skip and do not dequeue */
+	if (frame_type == S5P_FIMV_DECODE_FRAME_SKIPPED) {
+		if (!ctx->after_packed_pb)
+			ctx->sequence++;
+		ctx->after_packed_pb = 0;
+		return;
+	}
+	ctx->sequence++;
+	/* The MFC returns address of the buffer, now we have to
+	 * check which videobuf does it correspond to */
+	list_for_each_entry(dst_buf, &ctx->dst_queue, list) {
+		/* Check if this is the buffer we're looking for */
+		if (vb2_dma_contig_plane_paddr(dst_buf->b, 0) == dspl_y_addr) {
+			list_del(&dst_buf->list);
+			ctx->dst_queue_cnt--;
+			dst_buf->b->v4l2_buf.sequence = ctx->sequence;
+			if (s5p_mfc_read_shm(ctx, PIC_TIME_TOP) ==
+				s5p_mfc_read_shm(ctx, PIC_TIME_BOT))
+				dst_buf->b->v4l2_buf.field = V4L2_FIELD_NONE;
+			else
+				dst_buf->b->v4l2_buf.field =
+							V4L2_FIELD_INTERLACED;
+			vb2_set_plane_payload(dst_buf->b, 0, ctx->luma_size);
+			vb2_set_plane_payload(dst_buf->b, 1, ctx->chroma_size);
+			clear_bit(dst_buf->b->v4l2_buf.index,
+							&ctx->dec_dst_flag);
+
+			vb2_buffer_done(dst_buf->b,
+				err ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+
+			index = dst_buf->b->v4l2_buf.index;
+			break;
+		}
+	}
+}
+
+/* Handle frame decoding interrupt */
+static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
+					unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int dst_frame_status;
+	struct s5p_mfc_buf *src_buf;
+	unsigned long flags;
+	unsigned int res_change;
+
+	unsigned int index;
+
+	dst_frame_status = s5p_mfc_get_dspl_status()
+				& S5P_FIMV_DEC_STATUS_DECODING_STATUS_MASK;
+	res_change = s5p_mfc_get_dspl_status()
+				& S5P_FIMV_DEC_STATUS_RESOLUTION_MASK;
+	mfc_debug(2, "Frame Status: %x\n", dst_frame_status);
+	if (ctx->state == MFCINST_RES_CHANGE_INIT)
+		ctx->state = MFCINST_RES_CHANGE_FLUSH;
+	if (res_change) {
+		ctx->state = MFCINST_RES_CHANGE_INIT;
+		s5p_mfc_clear_int_flags(dev);
+		wake_up_ctx(ctx, reason, err);
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+		s5p_mfc_clock_off();
+		s5p_mfc_try_run(dev);
+		return;
+	}
+	if (ctx->dpb_flush_flag)
+		ctx->dpb_flush_flag = 0;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	/* All frames remaining in the buffer have been extracted  */
+	if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_EMPTY) {
+		if (ctx->state == MFCINST_RES_CHANGE_FLUSH) {
+			s5p_mfc_handle_frame_all_extracted(ctx);
+			ctx->state = MFCINST_RES_CHANGE_END;
+			goto leave_handle_frame;
+		} else {
+			s5p_mfc_handle_frame_all_extracted(ctx);
+		}
+	}
+
+	if (dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY ||
+		dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_ONLY)
+		s5p_mfc_handle_frame_copy_time(ctx);
+
+	/* A frame has been decoded and is in the buffer  */
+	if (dst_frame_status == S5P_FIMV_DEC_STATUS_DISPLAY_ONLY ||
+	    dst_frame_status == S5P_FIMV_DEC_STATUS_DECODING_DISPLAY) {
+		s5p_mfc_handle_frame_new(ctx, err);
+	} else {
+		mfc_debug(2, "No frame decode\n");
+	}
+	/* Mark source buffer as complete */
+	if (dst_frame_status != S5P_FIMV_DEC_STATUS_DISPLAY_ONLY
+		&& !list_empty(&ctx->src_queue)) {
+		src_buf = list_entry(ctx->src_queue.next, struct s5p_mfc_buf,
+								list);
+		ctx->consumed_stream += s5p_mfc_get_consumed_stream();
+		if (ctx->codec_mode != S5P_FIMV_CODEC_H264_DEC &&
+			s5p_mfc_get_frame_type() == S5P_FIMV_DECODE_FRAME_P_FRAME
+					&& ctx->consumed_stream + STUFF_BYTE <
+					src_buf->b->v4l2_planes[0].bytesused) {
+			/* Run MFC again on the same buffer */
+			mfc_debug(2, "Running again the same buffer\n");
+			ctx->after_packed_pb = 1;
+		} else {
+			index = src_buf->b->v4l2_buf.index;
+			mfc_debug(2, "MFC needs next buffer\n");
+			ctx->consumed_stream = 0;
+			list_del(&src_buf->list);
+			ctx->src_queue_cnt--;
+			if (s5p_mfc_err_dec(err) > 0)
+				vb2_buffer_done(src_buf->b, VB2_BUF_STATE_ERROR);
+			else
+				vb2_buffer_done(src_buf->b, VB2_BUF_STATE_DONE);
+		}
+	}
+leave_handle_frame:
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING)
+				    || ctx->dst_queue_cnt < ctx->dpb_count)
+		clear_work_bit(ctx);
+	s5p_mfc_clear_int_flags(dev);
+	wake_up_ctx(ctx, reason, err);
+	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+		BUG();
+	s5p_mfc_clock_off();
+	s5p_mfc_try_run(dev);
+}
+
+/* Error handling for interrupt */
+static void s5p_mfc_handle_error(struct s5p_mfc_ctx *ctx,
+				 unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_dev *dev;
+	unsigned long flags;
+
+	/* If no context is available then all necessary
+	 * processing has been done. */
+	if (ctx == 0)
+		return;
+
+	dev = ctx->dev;
+	mfc_err("Interrupt Error: %08x\n", err);
+	s5p_mfc_clear_int_flags(dev);
+	wake_up_dev(dev, reason, err);
+
+	/* Error recovery is dependent on the state of context */
+	switch (ctx->state) {
+	case MFCINST_INIT:
+		/* This error had to happen while acquireing instance */
+	case MFCINST_GOT_INST:
+		/* This error had to happen while parsing the header */
+	case MFCINST_HEAD_PARSED:
+		/* This error had to happen while setting dst buffers */
+	case MFCINST_RETURN_INST:
+		/* This error had to happen while releasing instance */
+		clear_work_bit(ctx);
+		wake_up_ctx(ctx, reason, err);
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+		s5p_mfc_clock_off();
+		ctx->state = MFCINST_ERROR;
+		break;
+	case MFCINST_FINISHING:
+	case MFCINST_FINISHED:
+	case MFCINST_RUNNING:
+		/* It is higly probable that an error occured
+		 * while decoding a frame */
+		clear_work_bit(ctx);
+		ctx->state = MFCINST_ERROR;
+		/* Mark all dst buffers as having an error */
+		spin_lock_irqsave(&dev->irqlock, flags);
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		/* Mark all src buffers as having an error */
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+		s5p_mfc_clock_off();
+		break;
+	default:
+		mfc_err("Encountered an error interrupt which had not been handled\n");
+		break;
+	}
+	return;
+}
+
+/* Header parsing interrupt handling */
+static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
+				 unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_dev *dev;
+	unsigned int guard_width, guard_height;
+
+	if (ctx == 0)
+		return;
+	dev = ctx->dev;
+	if (ctx->c_ops->post_seq_start) {
+		if (ctx->c_ops->post_seq_start(ctx))
+			mfc_err("post_seq_start() failed\n");
+	} else {
+		ctx->img_width = s5p_mfc_get_img_width();
+		ctx->img_height = s5p_mfc_get_img_height();
+
+		ctx->buf_width = ALIGN(ctx->img_width,
+						S5P_FIMV_NV12MT_HALIGN);
+		ctx->buf_height = ALIGN(ctx->img_height,
+						S5P_FIMV_NV12MT_VALIGN);
+		mfc_debug(2, "SEQ Done: Movie dimensions %dx%d, "
+			"buffer dimensions: %dx%d\n", ctx->img_width,
+				ctx->img_height, ctx->buf_width,
+						ctx->buf_height);
+		if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) {
+			ctx->luma_size = ALIGN(ctx->buf_width *
+				ctx->buf_height, S5P_FIMV_DEC_BUF_ALIGN);
+			ctx->chroma_size = ALIGN(ctx->buf_width *
+					 ALIGN((ctx->img_height >> 1),
+					       S5P_FIMV_NV12MT_VALIGN),
+					       S5P_FIMV_DEC_BUF_ALIGN);
+			ctx->mv_size = ALIGN(ctx->buf_width *
+					ALIGN((ctx->buf_height >> 2),
+					S5P_FIMV_NV12MT_VALIGN),
+					S5P_FIMV_DEC_BUF_ALIGN);
+		} else {
+			guard_width = ALIGN(ctx->img_width + 24,
+					S5P_FIMV_NV12MT_HALIGN);
+			guard_height = ALIGN(ctx->img_height + 16,
+						S5P_FIMV_NV12MT_VALIGN);
+			ctx->luma_size = ALIGN(guard_width *
+				guard_height, S5P_FIMV_DEC_BUF_ALIGN);
+			guard_width = ALIGN(ctx->img_width + 16,
+						S5P_FIMV_NV12MT_HALIGN);
+			guard_height = ALIGN((ctx->img_height >> 1) + 4,
+						S5P_FIMV_NV12MT_VALIGN);
+			ctx->chroma_size = ALIGN(guard_width *
+				guard_height, S5P_FIMV_DEC_BUF_ALIGN);
+			ctx->mv_size = 0;
+		}
+		ctx->dpb_count = s5p_mfc_get_dpb_count();
+		if (ctx->img_width == 0 || ctx->img_width == 0)
+			ctx->state = MFCINST_ERROR;
+		else
+			ctx->state = MFCINST_HEAD_PARSED;
+	}
+	s5p_mfc_clear_int_flags(dev);
+	clear_work_bit(ctx);
+	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+		BUG();
+	s5p_mfc_clock_off();
+	s5p_mfc_try_run(dev);
+	wake_up_ctx(ctx, reason, err);
+}
+
+/* Header parsing interrupt handling */
+static void s5p_mfc_handle_init_buffers(struct s5p_mfc_ctx *ctx,
+				 unsigned int reason, unsigned int err)
+{
+	struct s5p_mfc_buf *src_buf;
+	struct s5p_mfc_dev *dev;
+	unsigned long flags;
+
+	if (ctx == 0)
+		return;
+	dev = ctx->dev;
+	s5p_mfc_clear_int_flags(dev);
+	ctx->int_type = reason;
+	ctx->int_err = err;
+	ctx->int_cond = 1;
+	spin_lock(&dev->condlock);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock(&dev->condlock);
+	if (err == 0) {
+		ctx->state = MFCINST_RUNNING;
+		if (!ctx->dpb_flush_flag) {
+			spin_lock_irqsave(&dev->irqlock, flags);
+			if (!list_empty(&ctx->src_queue)) {
+				src_buf = list_entry(ctx->src_queue.next,
+					     struct s5p_mfc_buf, list);
+				list_del(&src_buf->list);
+				ctx->src_queue_cnt--;
+				vb2_buffer_done(src_buf->b,
+						VB2_BUF_STATE_DONE);
+			}
+			spin_unlock_irqrestore(&dev->irqlock, flags);
+		} else {
+			ctx->dpb_flush_flag = 0;
+		}
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+
+		s5p_mfc_clock_off();
+
+		wake_up(&ctx->queue);
+		s5p_mfc_try_run(dev);
+	} else {
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			BUG();
+
+		s5p_mfc_clock_off();
+
+		wake_up(&ctx->queue);
+	}
+}
+
+/* Interrupt processing */
+static irqreturn_t s5p_mfc_irq(int irq, void *priv)
+{
+	struct s5p_mfc_dev *dev = priv;
+	struct s5p_mfc_ctx *ctx;
+	unsigned int reason;
+	unsigned int err;
+
+	mfc_debug_enter();
+	/* Reset the timeout watchdog */
+	atomic_set(&dev->watchdog_cnt, 0);
+	ctx = dev->ctx[dev->curr_ctx];
+	/* Get the reason of interrupt and the error code */
+	reason = s5p_mfc_get_int_reason();
+	err = s5p_mfc_get_int_err();
+	mfc_debug(1, "Int reason: %d (err: %08x)\n", reason, err);
+	switch (reason) {
+	case S5P_FIMV_R2H_CMD_ERR_RET:
+		/* An error has occured */
+		if (ctx->state == MFCINST_RUNNING &&
+			s5p_mfc_err_dec(err) >= S5P_FIMV_ERR_WARNINGS_START)
+			s5p_mfc_handle_frame(ctx, reason, err);
+		else
+			s5p_mfc_handle_error(ctx, reason, err);
+		clear_bit(0, &dev->enter_suspend);
+		break;
+
+	case S5P_FIMV_R2H_CMD_SLICE_DONE_RET:
+	case S5P_FIMV_R2H_CMD_FRAME_DONE_RET:
+		if (ctx->c_ops->post_frame_start) {
+			if (ctx->c_ops->post_frame_start(ctx))
+				mfc_err("post_frame_start() failed\n");
+			s5p_mfc_clear_int_flags(dev);
+			wake_up_ctx(ctx, reason, err);
+			if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+				BUG();
+			s5p_mfc_clock_off();
+			s5p_mfc_try_run(dev);
+		} else {
+			s5p_mfc_handle_frame(ctx, reason, err);
+		}
+		break;
+
+	case S5P_FIMV_R2H_CMD_SEQ_DONE_RET:
+		s5p_mfc_handle_seq_done(ctx, reason, err);
+		break;
+
+	case S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET:
+		ctx->inst_no = s5p_mfc_get_inst_no();
+		ctx->state = MFCINST_GOT_INST;
+		clear_work_bit(ctx);
+		wake_up(&ctx->queue);
+		goto irq_cleanup_hw;
+
+	case S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET:
+		clear_work_bit(ctx);
+		ctx->state = MFCINST_FREE;
+		wake_up(&ctx->queue);
+		goto irq_cleanup_hw;
+
+	case S5P_FIMV_R2H_CMD_SYS_INIT_RET:
+	case S5P_FIMV_R2H_CMD_FW_STATUS_RET:
+	case S5P_FIMV_R2H_CMD_SLEEP_RET:
+	case S5P_FIMV_R2H_CMD_WAKEUP_RET:
+		if (ctx)
+			clear_work_bit(ctx);
+		s5p_mfc_clear_int_flags(dev);
+		wake_up_dev(dev, reason, err);
+		clear_bit(0, &dev->hw_lock);
+		clear_bit(0, &dev->enter_suspend);
+		break;
+
+	case S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET:
+		s5p_mfc_handle_init_buffers(ctx, reason, err);
+		break;
+	default:
+		mfc_debug(2, "Unknown int reason\n");
+		s5p_mfc_clear_int_flags(dev);
+	}
+	mfc_debug_leave();
+	return IRQ_HANDLED;
+irq_cleanup_hw:
+	s5p_mfc_clear_int_flags(dev);
+	ctx->int_type = reason;
+	ctx->int_err = err;
+	ctx->int_cond = 1;
+	if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+		mfc_err("Failed to unlock hw\n");
+
+	s5p_mfc_clock_off();
+
+	s5p_mfc_try_run(dev);
+	mfc_debug(2, "Exit via irq_cleanup_hw\n");
+	return IRQ_HANDLED;
+}
+
+/* Open an MFC node */
+static int s5p_mfc_open(struct file *file)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = NULL;
+	struct vb2_queue *q;
+	unsigned long flags;
+	int ret = 0;
+
+	mfc_debug_enter();
+	dev->num_inst++;	/* It is guarded by mfc_mutex in vfd */
+	/* Allocate memory for context */
+	ctx = kzalloc(sizeof *ctx, GFP_KERNEL);
+	if (!ctx) {
+		mfc_err("Not enough memory\n");
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+	v4l2_fh_init(&ctx->fh, video_devdata(file));
+	file->private_data = &ctx->fh;
+	v4l2_fh_add(&ctx->fh);
+	ctx->dev = dev;
+	INIT_LIST_HEAD(&ctx->src_queue);
+	INIT_LIST_HEAD(&ctx->dst_queue);
+	ctx->src_queue_cnt = 0;
+	ctx->dst_queue_cnt = 0;
+	/* Get context number */
+	ctx->num = 0;
+	while (dev->ctx[ctx->num]) {
+		ctx->num++;
+		if (ctx->num >= MFC_NUM_CONTEXTS) {
+			mfc_err("Too many open contexts\n");
+			ret = -EBUSY;
+			goto err_no_ctx;
+		}
+	}
+	/* Mark context as idle */
+	spin_lock_irqsave(&dev->condlock, flags);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock_irqrestore(&dev->condlock, flags);
+	dev->ctx[ctx->num] = ctx;
+	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+		ctx->type = MFCINST_DECODER;
+		ctx->c_ops = get_dec_codec_ops();
+		/* Setup ctrl handler */
+		ret = s5p_mfc_dec_ctrls_setup(ctx);
+		if (ret) {
+			mfc_err("Failed to setup mfc controls\n");
+			goto err_ctrls_setup;
+		}
+	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+		ctx->type = MFCINST_ENCODER;
+		ctx->c_ops = get_enc_codec_ops();
+		/* only for encoder */
+		INIT_LIST_HEAD(&ctx->ref_queue);
+		ctx->ref_queue_cnt = 0;
+		/* Setup ctrl handler */
+		ret = s5p_mfc_enc_ctrls_setup(ctx);
+		if (ret) {
+			mfc_err("Failed to setup mfc controls\n");
+			goto err_ctrls_setup;
+		}
+	} else {
+		ret = -ENOENT;
+		goto err_bad_node;
+	}
+	ctx->fh.ctrl_handler = &ctx->ctrl_handler;
+	ctx->inst_no = -1;
+	/* Load firmware if this is the first instance */
+	if (dev->num_inst == 1) {
+		dev->watchdog_timer.expires = jiffies +
+					msecs_to_jiffies(MFC_WATCHDOG_INTERVAL);
+		add_timer(&dev->watchdog_timer);
+		ret = s5p_mfc_power_on();
+		if (ret < 0) {
+			mfc_err("power on failed\n");
+			goto err_pwr_enable;
+		}
+		s5p_mfc_clock_on();
+		ret = s5p_mfc_alloc_and_load_firmware(dev);
+		if (ret)
+			goto err_alloc_fw;
+		/* Init the FW */
+		ret = s5p_mfc_init_hw(dev);
+		if (ret)
+			goto err_init_hw;
+		s5p_mfc_clock_off();
+	}
+	/* Init videobuf2 queue for CAPTURE */
+	q = &ctx->vq_dst;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	q->drv_priv = &ctx->fh;
+	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+		q->io_modes = VB2_MMAP;
+		q->ops = get_dec_queue_ops();
+	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+		q->io_modes = VB2_MMAP | VB2_USERPTR;
+		q->ops = get_enc_queue_ops();
+	} else {
+		ret = -ENOENT;
+		goto err_queue_init;
+	}
+	q->mem_ops = (struct vb2_mem_ops *)&vb2_dma_contig_memops;
+	ret = vb2_queue_init(q);
+	if (ret) {
+		mfc_err("Failed to initialize videobuf2 queue(capture)\n");
+		goto err_queue_init;
+	}
+	/* Init videobuf2 queue for OUTPUT */
+	q = &ctx->vq_src;
+	q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
+	q->io_modes = VB2_MMAP;
+	q->drv_priv = &ctx->fh;
+	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+		q->io_modes = VB2_MMAP;
+		q->ops = get_dec_queue_ops();
+	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+		q->io_modes = VB2_MMAP | VB2_USERPTR;
+		q->ops = get_enc_queue_ops();
+	} else {
+		ret = -ENOENT;
+		goto err_queue_init;
+	}
+	q->mem_ops = (struct vb2_mem_ops *)&vb2_dma_contig_memops;
+	ret = vb2_queue_init(q);
+	if (ret) {
+		mfc_err("Failed to initialize videobuf2 queue(output)\n");
+		goto err_queue_init;
+	}
+	init_waitqueue_head(&ctx->queue);
+	mfc_debug_leave();
+	return ret;
+	/* Deinit when failure occured */
+err_queue_init:
+err_init_hw:
+	s5p_mfc_release_firmware(dev);
+err_alloc_fw:
+	dev->ctx[ctx->num] = 0;
+	del_timer_sync(&dev->watchdog_timer);
+	s5p_mfc_clock_off();
+err_pwr_enable:
+	if (dev->num_inst == 1) {
+		if (s5p_mfc_power_off() < 0)
+			mfc_err("power off failed\n");
+		s5p_mfc_release_firmware(dev);
+	}
+err_ctrls_setup:
+	s5p_mfc_dec_ctrls_delete(ctx);
+err_bad_node:
+err_no_ctx:
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	kfree(ctx);
+err_alloc:
+	dev->num_inst--;
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Release MFC context */
+static int s5p_mfc_release(struct file *file)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+
+	mfc_debug_enter();
+	s5p_mfc_clock_on();
+	vb2_queue_release(&ctx->vq_src);
+	vb2_queue_release(&ctx->vq_dst);
+	/* Mark context as idle */
+	spin_lock_irqsave(&dev->condlock, flags);
+	clear_bit(ctx->num, &dev->ctx_work_bits);
+	spin_unlock_irqrestore(&dev->condlock, flags);
+	/* If instance was initialised then
+	 * return instance and free reosurces */
+	if (ctx->inst_no != MFC_NO_INSTANCE_SET) {
+		mfc_debug(2, "Has to free instance\n");
+		ctx->state = MFCINST_RETURN_INST;
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_try_run(dev);
+		/* Wait until instance is returned or timeout occured */
+		if (s5p_mfc_wait_for_done_ctx
+		    (ctx, S5P_FIMV_R2H_CMD_CLOSE_INSTANCE_RET, 0)) {
+			s5p_mfc_clock_off();
+			mfc_err("Err returning instance\n");
+		}
+		mfc_debug(2, "After free instance\n");
+		/* Free resources */
+		s5p_mfc_release_codec_buffers(ctx);
+		s5p_mfc_release_instance_buffer(ctx);
+		if (ctx->type == MFCINST_DECODER)
+			s5p_mfc_release_dec_desc_buffer(ctx);
+
+		ctx->inst_no = MFC_NO_INSTANCE_SET;
+	}
+	/* hardware locking scheme */
+	if (dev->curr_ctx == ctx->num)
+		clear_bit(0, &dev->hw_lock);
+	dev->num_inst--;
+	if (dev->num_inst == 0) {
+		mfc_debug(2, "Last instance - release firmware\n");
+		/* reset <-> F/W release */
+		s5p_mfc_reset(dev);
+		s5p_mfc_release_firmware(dev);
+		del_timer_sync(&dev->watchdog_timer);
+		if (s5p_mfc_power_off() < 0)
+			mfc_err("Power off failed\n");
+	}
+	mfc_debug(2, "Shutting down clock\n");
+	s5p_mfc_clock_off();
+	dev->ctx[ctx->num] = 0;
+	s5p_mfc_dec_ctrls_delete(ctx);
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	kfree(ctx);
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Poll */
+static unsigned int s5p_mfc_poll(struct file *file,
+				 struct poll_table_struct *wait)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct vb2_queue *src_q, *dst_q;
+	struct vb2_buffer *src_vb = NULL, *dst_vb = NULL;
+	unsigned int rc = 0;
+	unsigned long flags;
+
+	src_q = &ctx->vq_src;
+	dst_q = &ctx->vq_dst;
+	/*
+	 * There has to be at least one buffer queued on each queued_list, which
+	 * means either in driver already or waiting for driver to claim it
+	 * and start processing.
+	 */
+	if ((!src_q->streaming || list_empty(&src_q->queued_list))
+		&& (!dst_q->streaming || list_empty(&dst_q->queued_list))) {
+		rc = POLLERR;
+		goto end;
+	}
+	mutex_unlock(&dev->mfc_mutex);
+	poll_wait(file, &src_q->done_wq, wait);
+	poll_wait(file, &dst_q->done_wq, wait);
+	mutex_lock(&dev->mfc_mutex);
+	spin_lock_irqsave(&src_q->done_lock, flags);
+	if (!list_empty(&src_q->done_list))
+		src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer,
+								done_entry);
+	if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE
+				|| src_vb->state == VB2_BUF_STATE_ERROR))
+		rc |= POLLOUT | POLLWRNORM;
+	spin_unlock_irqrestore(&src_q->done_lock, flags);
+	spin_lock_irqsave(&dst_q->done_lock, flags);
+	if (!list_empty(&dst_q->done_list))
+		dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer,
+								done_entry);
+	if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE
+				|| dst_vb->state == VB2_BUF_STATE_ERROR))
+		rc |= POLLIN | POLLRDNORM;
+	spin_unlock_irqrestore(&dst_q->done_lock, flags);
+end:
+	return rc;
+}
+
+/* Mmap */
+static int s5p_mfc_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(file->private_data);
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	int ret;
+	if (offset < DST_QUEUE_OFF_BASE) {
+		mfc_debug(2, "mmaping source\n");
+		ret = vb2_mmap(&ctx->vq_src, vma);
+	} else {		/* capture */
+		mfc_debug(2, "mmaping destination\n");
+		vma->vm_pgoff -= (DST_QUEUE_OFF_BASE >> PAGE_SHIFT);
+		ret = vb2_mmap(&ctx->vq_dst, vma);
+	}
+	return ret;
+}
+
+/* v4l2 ops */
+static const struct v4l2_file_operations s5p_mfc_fops = {
+	.owner = THIS_MODULE,
+	.open = s5p_mfc_open,
+	.release = s5p_mfc_release,
+	.poll = s5p_mfc_poll,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = s5p_mfc_mmap,
+};
+
+static int match_child(struct device *dev, void *data)
+{
+	if (!dev_name(dev))
+		return 0;
+	return !strcmp(dev_name(dev), (char *)data);
+}
+
+
+/* MFC probe function */
+static int __devinit s5p_mfc_probe(struct platform_device *pdev)
+{
+	struct s5p_mfc_dev *dev;
+	struct video_device *vfd;
+	struct resource *res;
+	int ret;
+
+	pr_debug("%s++\n", __func__);
+	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	if (!dev) {
+		dev_err(&pdev->dev, "Not enough memory for MFC device\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&dev->irqlock);
+	spin_lock_init(&dev->condlock);
+	dev->plat_dev = pdev;
+	if (!dev->plat_dev) {
+		dev_err(&pdev->dev, "No platform data specified\n");
+		ret = -ENODEV;
+		goto err_dev;
+	}
+
+	ret = s5p_mfc_init_pm(dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get mfc clock source\n");
+		goto err_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get memory region resource\n");
+		ret = -ENOENT;
+		goto err_res;
+	}
+
+	dev->mfc_mem = request_mem_region(res->start, resource_size(res),
+					  pdev->name);
+	if (dev->mfc_mem == NULL) {
+		dev_err(&pdev->dev, "failed to get memory region\n");
+		ret = -ENOENT;
+		goto err_mem_reg;
+	}
+	dev->regs_base = ioremap(dev->mfc_mem->start, resource_size(dev->mfc_mem));
+	if (dev->regs_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap address region\n");
+		ret = -ENOENT;
+		goto err_ioremap;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to get irq resource\n");
+		ret = -ENOENT;
+		goto err_get_res;
+	}
+	dev->irq = res->start;
+	ret = request_irq(dev->irq, s5p_mfc_irq, IRQF_DISABLED, pdev->name,
+									dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to install irq (%d)\n", ret);
+		goto err_req_irq;
+	}
+
+	dev->mem_dev_l = device_find_child(&dev->plat_dev->dev, "s5p-mfc-l",
+					   match_child);
+	if (!dev->mem_dev_l) {
+		mfc_err("Mem child (L) device get failed\n");
+		ret = -ENODEV;
+		goto err_find_child;
+	}
+	dev->mem_dev_r = device_find_child(&dev->plat_dev->dev, "s5p-mfc-r",
+					   match_child);
+	if (!dev->mem_dev_r) {
+		mfc_err("Mem child (R) device get failed\n");
+		ret = -ENODEV;
+		goto err_find_child;
+	}
+
+	dev->alloc_ctx[0] = vb2_dma_contig_init_ctx(dev->mem_dev_l);
+	if (IS_ERR_OR_NULL(dev->alloc_ctx[0])) {
+		ret = PTR_ERR(dev->alloc_ctx[0]);
+		goto err_mem_init_ctx_0;
+	}
+	dev->alloc_ctx[1] = vb2_dma_contig_init_ctx(dev->mem_dev_r);
+	if (IS_ERR_OR_NULL(dev->alloc_ctx[1])) {
+		ret = PTR_ERR(dev->alloc_ctx[1]);
+		goto err_mem_init_ctx_1;
+	}
+
+	mutex_init(&dev->mfc_mutex);
+
+	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+	if (ret)
+		goto err_v4l2_dev_reg;
+	init_waitqueue_head(&dev->queue);
+
+	/* decoder */
+	vfd = video_device_alloc();
+	if (!vfd) {
+		v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
+		ret = -ENOMEM;
+		goto err_dec_alloc;
+	}
+	vfd->fops	= &s5p_mfc_fops,
+	vfd->ioctl_ops	= get_dec_v4l2_ioctl_ops();
+	vfd->release	= video_device_release,
+	vfd->lock	= &dev->mfc_mutex;
+	vfd->v4l2_dev	= &dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME);
+	dev->vfd_dec	= vfd;
+	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+		video_device_release(vfd);
+		goto err_dec_reg;
+	}
+	v4l2_info(&dev->v4l2_dev,
+		  "decoder registered as /dev/video%d\n", vfd->num);
+	video_set_drvdata(vfd, dev);
+
+	/* encoder */
+	vfd = video_device_alloc();
+	if (!vfd) {
+		v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
+		ret = -ENOMEM;
+		goto err_enc_alloc;
+	}
+	vfd->fops	= &s5p_mfc_fops,
+	vfd->ioctl_ops	= get_enc_v4l2_ioctl_ops();
+	vfd->release	= video_device_release,
+	vfd->lock	= &dev->mfc_mutex;
+	vfd->v4l2_dev	= &dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME);
+	dev->vfd_enc	= vfd;
+	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+		video_device_release(vfd);
+		goto err_enc_reg;
+	}
+	v4l2_info(&dev->v4l2_dev,
+		  "encoder registered as /dev/video%d\n", vfd->num);
+	video_set_drvdata(vfd, dev);
+	platform_set_drvdata(pdev, dev);
+
+	dev->hw_lock = 0;
+	dev->watchdog_workqueue = create_singlethread_workqueue(S5P_MFC_NAME);
+	INIT_WORK(&dev->watchdog_work, s5p_mfc_watchdog_worker);
+	atomic_set(&dev->watchdog_cnt, 0);
+	init_timer(&dev->watchdog_timer);
+	dev->watchdog_timer.data = (unsigned long)dev;
+	dev->watchdog_timer.function = s5p_mfc_watchdog;
+
+	pr_debug("%s--\n", __func__);
+	return 0;
+
+/* Deinit MFC if probe had failed */
+err_enc_reg:
+	video_device_release(dev->vfd_enc);
+err_enc_alloc:
+	video_unregister_device(dev->vfd_dec);
+err_dec_reg:
+	video_device_release(dev->vfd_dec);
+err_dec_alloc:
+	v4l2_device_unregister(&dev->v4l2_dev);
+err_v4l2_dev_reg:
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]);
+err_mem_init_ctx_1:
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]);
+err_mem_init_ctx_0:
+err_find_child:
+	free_irq(dev->irq, dev);
+err_req_irq:
+err_get_res:
+	iounmap(dev->regs_base);
+	dev->regs_base = NULL;
+err_ioremap:
+	release_resource(dev->mfc_mem);
+	kfree(dev->mfc_mem);
+err_mem_reg:
+err_res:
+	s5p_mfc_final_pm(dev);
+err_clk:
+err_dev:
+	kfree(dev);
+	pr_debug("%s-- with error\n", __func__);
+	return ret;
+
+}
+
+/* Remove the driver */
+static int __devexit s5p_mfc_remove(struct platform_device *pdev)
+{
+	struct s5p_mfc_dev *dev = platform_get_drvdata(pdev);
+
+	v4l2_info(&dev->v4l2_dev, "Removing %s\n", pdev->name);
+
+	del_timer_sync(&dev->watchdog_timer);
+	flush_workqueue(dev->watchdog_workqueue);
+	destroy_workqueue(dev->watchdog_workqueue);
+
+	video_unregister_device(dev->vfd_enc);
+	video_unregister_device(dev->vfd_dec);
+	v4l2_device_unregister(&dev->v4l2_dev);
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]);
+	vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]);
+
+	free_irq(dev->irq, dev);
+	iounmap(dev->regs_base);
+	if (dev->mfc_mem) {
+		release_resource(dev->mfc_mem);
+		kfree(dev->mfc_mem);
+		dev->mfc_mem = NULL;
+	}
+	s5p_mfc_final_pm(dev);
+	kfree(dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int s5p_mfc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+	int ret;
+
+	if (m_dev->num_inst == 0)
+		return 0;
+	return s5p_mfc_sleep(m_dev);
+	if (test_and_set_bit(0, &m_dev->enter_suspend) != 0) {
+		mfc_err("Error: going to suspend for a second time\n");
+		return -EIO;
+	}
+
+	/* Check if we're processing then wait if it necessary. */
+	while (test_and_set_bit(0, &m_dev->hw_lock) != 0) {
+		/* Try and lock the HW */
+		/* Wait on the interrupt waitqueue */
+		ret = wait_event_interruptible_timeout(m_dev->queue,
+			m_dev->int_cond || m_dev->ctx[m_dev->curr_ctx]->int_cond,
+			msecs_to_jiffies(MFC_INT_TIMEOUT));
+
+		if (ret == 0) {
+			mfc_err("Waiting for hardware to finish timed out\n");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+static int s5p_mfc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+
+	if (m_dev->num_inst == 0)
+		return 0;
+	return s5p_mfc_wakeup(m_dev);
+}
+#endif
+
+#ifdef CONFIG_PM_RUNTIME
+static int s5p_mfc_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+
+	atomic_set(&m_dev->pm.power, 0);
+	return 0;
+}
+
+static int s5p_mfc_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s5p_mfc_dev *m_dev = platform_get_drvdata(pdev);
+	int pre_power;
+
+	if (!m_dev->alloc_ctx)
+		return 0;
+	pre_power = atomic_read(&m_dev->pm.power);
+	atomic_set(&m_dev->pm.power, 1);
+	return 0;
+}
+#endif
+
+/* Power management */
+static const struct dev_pm_ops s5p_mfc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(s5p_mfc_suspend, s5p_mfc_resume)
+	SET_RUNTIME_PM_OPS(s5p_mfc_runtime_suspend, s5p_mfc_runtime_resume,
+			   NULL)
+};
+
+static struct platform_driver s5p_mfc_pdrv = {
+	.probe	= s5p_mfc_probe,
+	.remove	= __devexit_p(s5p_mfc_remove),
+	.driver	= {
+		.name	= S5P_MFC_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &s5p_mfc_pm_ops
+	},
+};
+
+static char banner[] __initdata =
+			"S5P MFC V4L2 Driver, (C) 2011 Samsung Electronics\n";
+
+static int __init s5p_mfc_init(void)
+{
+	int ret;
+
+	pr_info("%s", banner);
+	ret = platform_driver_register(&s5p_mfc_pdrv);
+	if (ret)
+		pr_err("Platform device registration failed.\n");
+	return ret;
+}
+
+static void __devexit s5p_mfc_exit(void)
+{
+	platform_driver_unregister(&s5p_mfc_pdrv);
+}
+
+module_init(s5p_mfc_init);
+module_exit(s5p_mfc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
+MODULE_DESCRIPTION("Samsung S5P Multi Format Codec V4L2 driver");
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c
new file mode 100644
index 00000000000..f0665ed1a52
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c
@@ -0,0 +1,120 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "regs-mfc.h"
+#include "s5p_mfc_cmd.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+
+/* This function is used to send a command to the MFC */
+static int s5p_mfc_cmd_host2risc(struct s5p_mfc_dev *dev, int cmd,
+						struct s5p_mfc_cmd_args *args)
+{
+	int cur_cmd;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
+	/* wait until host to risc command register becomes 'H2R_CMD_EMPTY' */
+	do {
+		if (time_after(jiffies, timeout)) {
+			mfc_err("Timeout while waiting for hardware\n");
+			return -EIO;
+		}
+		cur_cmd = mfc_read(dev, S5P_FIMV_HOST2RISC_CMD);
+	} while (cur_cmd != S5P_FIMV_H2R_CMD_EMPTY);
+	mfc_write(dev, args->arg[0], S5P_FIMV_HOST2RISC_ARG1);
+	mfc_write(dev, args->arg[1], S5P_FIMV_HOST2RISC_ARG2);
+	mfc_write(dev, args->arg[2], S5P_FIMV_HOST2RISC_ARG3);
+	mfc_write(dev, args->arg[3], S5P_FIMV_HOST2RISC_ARG4);
+	/* Issue the command */
+	mfc_write(dev, cmd, S5P_FIMV_HOST2RISC_CMD);
+	return 0;
+}
+
+/* Initialize the MFC */
+int s5p_mfc_sys_init_cmd(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_cmd_args h2r_args;
+
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	h2r_args.arg[0] = dev->fw_size;
+	return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_SYS_INIT, &h2r_args);
+}
+
+/* Suspend the MFC hardware */
+int s5p_mfc_sleep_cmd(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_cmd_args h2r_args;
+
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_SLEEP, &h2r_args);
+}
+
+/* Wake up the MFC hardware */
+int s5p_mfc_wakeup_cmd(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_cmd_args h2r_args;
+
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	return s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_WAKEUP, &h2r_args);
+}
+
+
+int s5p_mfc_open_inst_cmd(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_cmd_args h2r_args;
+	int ret;
+
+	/* Preparing decoding - getting instance number */
+	mfc_debug(2, "Getting instance number (codec: %d)\n", ctx->codec_mode);
+	dev->curr_ctx = ctx->num;
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	h2r_args.arg[0] = ctx->codec_mode;
+	h2r_args.arg[1] = 0; /* no crc & no pixelcache */
+	h2r_args.arg[2] = ctx->ctx_ofs;
+	h2r_args.arg[3] = ctx->ctx_size;
+	ret = s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_OPEN_INSTANCE,
+								&h2r_args);
+	if (ret) {
+		mfc_err("Failed to create a new instance\n");
+		ctx->state = MFCINST_ERROR;
+	}
+	return ret;
+}
+
+int s5p_mfc_close_inst_cmd(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_cmd_args h2r_args;
+	int ret;
+
+	if (ctx->state == MFCINST_FREE) {
+		mfc_err("Instance already returned\n");
+		ctx->state = MFCINST_ERROR;
+		return -EINVAL;
+	}
+	/* Closing decoding instance  */
+	mfc_debug(2, "Returning instance number %d\n", ctx->inst_no);
+	dev->curr_ctx = ctx->num;
+	memset(&h2r_args, 0, sizeof(struct s5p_mfc_cmd_args));
+	h2r_args.arg[0] = ctx->inst_no;
+	ret = s5p_mfc_cmd_host2risc(dev, S5P_FIMV_H2R_CMD_CLOSE_INSTANCE,
+								&h2r_args);
+	if (ret) {
+		mfc_err("Failed to return an instance\n");
+		ctx->state = MFCINST_ERROR;
+		return -EINVAL;
+	}
+	return 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h
new file mode 100644
index 00000000000..5ceebfe6131
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h
@@ -0,0 +1,30 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_cmd.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_CMD_H_
+#define S5P_MFC_CMD_H_
+
+#include "s5p_mfc_common.h"
+
+#define MAX_H2R_ARG	4
+
+struct s5p_mfc_cmd_args {
+	unsigned int	arg[MAX_H2R_ARG];
+};
+
+int s5p_mfc_sys_init_cmd(struct s5p_mfc_dev *dev);
+int s5p_mfc_sleep_cmd(struct s5p_mfc_dev *dev);
+int s5p_mfc_wakeup_cmd(struct s5p_mfc_dev *dev);
+int s5p_mfc_open_inst_cmd(struct s5p_mfc_ctx *ctx);
+int s5p_mfc_close_inst_cmd(struct s5p_mfc_ctx *ctx);
+
+#endif /* S5P_MFC_CMD_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_common.h b/drivers/media/video/s5p-mfc/s5p_mfc_common.h
new file mode 100644
index 00000000000..91146fa622e
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_common.h
@@ -0,0 +1,572 @@
+/*
+ * Samsung S5P Multi Format Codec v 5.0
+ *
+ * This file contains definitions of enums and structs used by the codec
+ * driver.
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Kamil Debski, <k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version
+ */
+
+#ifndef S5P_MFC_COMMON_H_
+#define S5P_MFC_COMMON_H_
+
+#include "regs-mfc.h"
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-core.h>
+
+/* Definitions related to MFC memory */
+
+/* Offset base used to differentiate between CAPTURE and OUTPUT
+*  while mmaping */
+#define DST_QUEUE_OFF_BASE      (TASK_SIZE / 2)
+
+/* Offset used by the hardware to store addresses */
+#define MFC_OFFSET_SHIFT	11
+
+#define FIRMWARE_ALIGN		0x20000		/* 128KB */
+#define MFC_H264_CTX_BUF_SIZE	0x96000		/* 600KB per H264 instance */
+#define MFC_CTX_BUF_SIZE	0x2800		/* 10KB per instance */
+#define DESC_BUF_SIZE		0x20000		/* 128KB for DESC buffer */
+#define SHARED_BUF_SIZE		0x2000		/* 8KB for shared buffer */
+
+#define DEF_CPB_SIZE		0x40000		/* 512KB */
+
+#define MFC_BANK1_ALLOC_CTX	0
+#define MFC_BANK2_ALLOC_CTX	1
+
+#define MFC_BANK1_ALIGN_ORDER	13
+#define MFC_BANK2_ALIGN_ORDER	13
+#define MFC_BASE_ALIGN_ORDER	17
+
+#include <media/videobuf2-dma-contig.h>
+
+static inline dma_addr_t s5p_mfc_mem_cookie(void *a, void *b)
+{
+	/* Same functionality as the vb2_dma_contig_plane_paddr */
+	dma_addr_t *paddr = vb2_dma_contig_memops.cookie(b);
+
+	return *paddr;
+}
+
+/* MFC definitions */
+#define MFC_MAX_EXTRA_DPB       5
+#define MFC_MAX_BUFFERS		32
+#define MFC_NUM_CONTEXTS	4
+/* Interrupt timeout */
+#define MFC_INT_TIMEOUT		2000
+/* Busy wait timeout */
+#define MFC_BW_TIMEOUT		500
+/* Watchdog interval */
+#define MFC_WATCHDOG_INTERVAL   1000
+/* After how many executions watchdog should assume lock up */
+#define MFC_WATCHDOG_CNT        10
+#define MFC_NO_INSTANCE_SET	-1
+#define MFC_ENC_CAP_PLANE_COUNT	1
+#define MFC_ENC_OUT_PLANE_COUNT	2
+#define STUFF_BYTE		4
+#define MFC_MAX_CTRLS		64
+
+#define mfc_read(dev, offset)		readl(dev->regs_base + (offset))
+#define mfc_write(dev, data, offset)	writel((data), dev->regs_base + \
+								(offset))
+
+/**
+ * enum s5p_mfc_fmt_type - type of the pixelformat
+ */
+enum s5p_mfc_fmt_type {
+	MFC_FMT_DEC,
+	MFC_FMT_ENC,
+	MFC_FMT_RAW,
+};
+
+/**
+ * enum s5p_mfc_node_type - The type of an MFC device node.
+ */
+enum s5p_mfc_node_type {
+	MFCNODE_INVALID = -1,
+	MFCNODE_DECODER = 0,
+	MFCNODE_ENCODER = 1,
+};
+
+/**
+ * enum s5p_mfc_inst_type - The type of an MFC instance.
+ */
+enum s5p_mfc_inst_type {
+	MFCINST_INVALID,
+	MFCINST_DECODER,
+	MFCINST_ENCODER,
+};
+
+/**
+ * enum s5p_mfc_inst_state - The state of an MFC instance.
+ */
+enum s5p_mfc_inst_state {
+	MFCINST_FREE = 0,
+	MFCINST_INIT = 100,
+	MFCINST_GOT_INST,
+	MFCINST_HEAD_PARSED,
+	MFCINST_BUFS_SET,
+	MFCINST_RUNNING,
+	MFCINST_FINISHING,
+	MFCINST_FINISHED,
+	MFCINST_RETURN_INST,
+	MFCINST_ERROR,
+	MFCINST_ABORT,
+	MFCINST_RES_CHANGE_INIT,
+	MFCINST_RES_CHANGE_FLUSH,
+	MFCINST_RES_CHANGE_END,
+};
+
+/**
+ * enum s5p_mfc_queue_state - The state of buffer queue.
+ */
+enum s5p_mfc_queue_state {
+	QUEUE_FREE,
+	QUEUE_BUFS_REQUESTED,
+	QUEUE_BUFS_QUERIED,
+	QUEUE_BUFS_MMAPED,
+};
+
+/**
+ * enum s5p_mfc_decode_arg - type of frame decoding
+ */
+enum s5p_mfc_decode_arg {
+	MFC_DEC_FRAME,
+	MFC_DEC_LAST_FRAME,
+	MFC_DEC_RES_CHANGE,
+};
+
+struct s5p_mfc_ctx;
+
+/**
+ * struct s5p_mfc_buf - MFC buffer
+ */
+struct s5p_mfc_buf {
+	struct list_head list;
+	struct vb2_buffer *b;
+	union {
+		struct {
+			size_t luma;
+			size_t chroma;
+		} raw;
+		size_t stream;
+	} cookie;
+	int used;
+};
+
+/**
+ * struct s5p_mfc_pm - power management data structure
+ */
+struct s5p_mfc_pm {
+	struct clk	*clock;
+	struct clk	*clock_gate;
+	atomic_t	power;
+	struct device	*device;
+};
+
+/**
+ * struct s5p_mfc_dev - The struct containing driver internal parameters.
+ *
+ * @v4l2_dev:		v4l2_device
+ * @vfd_dec:		video device for decoding
+ * @vfd_enc:		video device for encoding
+ * @plat_dev:		platform device
+ * @mem_dev_l:		child device of the left memory bank (0)
+ * @mem_dev_r:		child device of the right memory bank (1)
+ * @regs_base:		base address of the MFC hw registers
+ * @irq:		irq resource
+ * @mfc_mem:		MFC registers memory resource
+ * @dec_ctrl_handler:	control framework handler for decoding
+ * @enc_ctrl_handler:	control framework handler for encoding
+ * @pm:			power management control
+ * @num_inst:		couter of active MFC instances
+ * @irqlock:		lock for operations on videobuf2 queues
+ * @condlock:		lock for changing/checking if a context is ready to be
+ *			processed
+ * @mfc_mutex:		lock for video_device
+ * @int_cond:		variable used by the waitqueue
+ * @int_type:		type of last interrupt
+ * @int_err:		error number for last interrupt
+ * @queue:		waitqueue for waiting for completion of device commands
+ * @fw_size:		size of firmware
+ * @bank1:		address of the beggining of bank 1 memory
+ * @bank2:		address of the beggining of bank 2 memory
+ * @hw_lock:		used for hardware locking
+ * @ctx:		array of driver contexts
+ * @curr_ctx:		number of the currently running context
+ * @ctx_work_bits:	used to mark which contexts are waiting for hardware
+ * @watchdog_cnt:	counter for the watchdog
+ * @watchdog_workqueue:	workqueue for the watchdog
+ * @watchdog_work:	worker for the watchdog
+ * @alloc_ctx:		videobuf2 allocator contexts for two memory banks
+ * @enter_suspend:	flag set when entering suspend
+ *
+ */
+struct s5p_mfc_dev {
+	struct v4l2_device	v4l2_dev;
+	struct video_device	*vfd_dec;
+	struct video_device	*vfd_enc;
+	struct platform_device	*plat_dev;
+	struct device		*mem_dev_l;
+	struct device		*mem_dev_r;
+	void __iomem		*regs_base;
+	int			irq;
+	struct resource		*mfc_mem;
+	struct v4l2_ctrl_handler dec_ctrl_handler;
+	struct v4l2_ctrl_handler enc_ctrl_handler;
+	struct s5p_mfc_pm	pm;
+	int num_inst;
+	spinlock_t irqlock;	/* lock when operating on videobuf2 queues */
+	spinlock_t condlock;	/* lock when changing/checking if a context is
+					ready to be processed */
+	struct mutex mfc_mutex; /* video_device lock */
+	int int_cond;
+	int int_type;
+	unsigned int int_err;
+	wait_queue_head_t queue;
+	size_t fw_size;
+	size_t bank1;
+	size_t bank2;
+	unsigned long hw_lock;
+	struct s5p_mfc_ctx *ctx[MFC_NUM_CONTEXTS];
+	int curr_ctx;
+	unsigned long ctx_work_bits;
+	atomic_t watchdog_cnt;
+	struct timer_list watchdog_timer;
+	struct workqueue_struct *watchdog_workqueue;
+	struct work_struct watchdog_work;
+	void *alloc_ctx[2];
+	unsigned long enter_suspend;
+};
+
+/**
+ * struct s5p_mfc_h264_enc_params - encoding parameters for h264
+ */
+struct s5p_mfc_h264_enc_params {
+	enum v4l2_mpeg_video_h264_profile profile;
+	enum v4l2_mpeg_video_h264_loop_filter_mode loop_filter_mode;
+	s8 loop_filter_alpha;
+	s8 loop_filter_beta;
+	enum v4l2_mpeg_video_h264_entropy_mode entropy_mode;
+	u8 max_ref_pic;
+	u8 num_ref_pic_4p;
+	int _8x8_transform;
+	int rc_mb;
+	int rc_mb_dark;
+	int rc_mb_smooth;
+	int rc_mb_static;
+	int rc_mb_activity;
+	int vui_sar;
+	u8 vui_sar_idc;
+	u16 vui_ext_sar_width;
+	u16 vui_ext_sar_height;
+	int open_gop;
+	u16 open_gop_size;
+	u8 rc_frame_qp;
+	u8 rc_min_qp;
+	u8 rc_max_qp;
+	u8 rc_p_frame_qp;
+	u8 rc_b_frame_qp;
+	enum v4l2_mpeg_video_h264_level level_v4l2;
+	int level;
+	u16 cpb_size;
+};
+
+/**
+ * struct s5p_mfc_mpeg4_enc_params - encoding parameters for h263 and mpeg4
+ */
+struct s5p_mfc_mpeg4_enc_params {
+	/* MPEG4 Only */
+	enum v4l2_mpeg_video_mpeg4_profile profile;
+	int quarter_pixel;
+	/* Common for MPEG4, H263 */
+	u16 vop_time_res;
+	u16 vop_frm_delta;
+	u8 rc_frame_qp;
+	u8 rc_min_qp;
+	u8 rc_max_qp;
+	u8 rc_p_frame_qp;
+	u8 rc_b_frame_qp;
+	enum v4l2_mpeg_video_mpeg4_level level_v4l2;
+	int level;
+};
+
+/**
+ * struct s5p_mfc_enc_params - general encoding parameters
+ */
+struct s5p_mfc_enc_params {
+	u16 width;
+	u16 height;
+
+	u16 gop_size;
+	enum v4l2_mpeg_video_multi_slice_mode slice_mode;
+	u16 slice_mb;
+	u32 slice_bit;
+	u16 intra_refresh_mb;
+	int pad;
+	u8 pad_luma;
+	u8 pad_cb;
+	u8 pad_cr;
+	int rc_frame;
+	u32 rc_bitrate;
+	u16 rc_reaction_coeff;
+	u16 vbv_size;
+
+	enum v4l2_mpeg_video_header_mode seq_hdr_mode;
+	enum v4l2_mpeg_mfc51_video_frame_skip_mode frame_skip_mode;
+	int fixed_target_bit;
+
+	u8 num_b_frame;
+	u32 rc_framerate_num;
+	u32 rc_framerate_denom;
+	int interlace;
+
+	union {
+		struct s5p_mfc_h264_enc_params h264;
+		struct s5p_mfc_mpeg4_enc_params mpeg4;
+	} codec;
+
+};
+
+/**
+ * struct s5p_mfc_codec_ops - codec ops, used by encoding
+ */
+struct s5p_mfc_codec_ops {
+	/* initialization routines */
+	int (*pre_seq_start) (struct s5p_mfc_ctx *ctx);
+	int (*post_seq_start) (struct s5p_mfc_ctx *ctx);
+	/* execution routines */
+	int (*pre_frame_start) (struct s5p_mfc_ctx *ctx);
+	int (*post_frame_start) (struct s5p_mfc_ctx *ctx);
+};
+
+#define call_cop(c, op, args...)				\
+	(((c)->c_ops->op) ?					\
+		((c)->c_ops->op(args)) : 0)
+
+/**
+ * struct s5p_mfc_ctx - This struct contains the instance context
+ *
+ * @dev:		pointer to the s5p_mfc_dev of the device
+ * @fh:			struct v4l2_fh
+ * @num:		number of the context that this structure describes
+ * @int_cond:		variable used by the waitqueue
+ * @int_type:		type of the last interrupt
+ * @int_err:		error number received from MFC hw in the interrupt
+ * @queue:		waitqueue that can be used to wait for this context to
+ *			finish
+ * @src_fmt:		source pixelformat information
+ * @dst_fmt:		destination pixelformat information
+ * @vq_src:		vb2 queue for source buffers
+ * @vq_dst:		vb2 queue for destination buffers
+ * @src_queue:		driver internal queue for source buffers
+ * @dst_queue:		driver internal queue for destination buffers
+ * @src_queue_cnt:	number of buffers queued on the source internal queue
+ * @dst_queue_cnt:	number of buffers queued on the dest internal queue
+ * @type:		type of the instance - decoder or encoder
+ * @state:		state of the context
+ * @inst_no:		number of hw instance associated with the context
+ * @img_width:		width of the image that is decoded or encoded
+ * @img_height:		height of the image that is decoded or encoded
+ * @buf_width:		width of the buffer for processed image
+ * @buf_height:		height of the buffer for processed image
+ * @luma_size:		size of a luma plane
+ * @chroma_size:	size of a chroma plane
+ * @mv_size:		size of a motion vectors buffer
+ * @consumed_stream:	number of bytes that have been used so far from the
+ *			decoding buffer
+ * @dpb_flush_flag:	flag used to indicate that a DPB buffers are being
+ *			flushed
+ * @bank1_buf:		handle to memory allocated for temporary buffers from
+ *			memory bank 1
+ * @bank1_phys:		address of the temporary buffers from memory bank 1
+ * @bank1_size:		size of the memory allocated for temporary buffers from
+ *			memory bank 1
+ * @bank2_buf:		handle to memory allocated for temporary buffers from
+ *			memory bank 2
+ * @bank2_phys:		address of the temporary buffers from memory bank 2
+ * @bank2_size:		size of the memory allocated for temporary buffers from
+ *			memory bank 2
+ * @capture_state:	state of the capture buffers queue
+ * @output_state:	state of the output buffers queue
+ * @src_bufs:		information on allocated source buffers
+ * @dst_bufs:		information on allocated destination buffers
+ * @sequence:		counter for the sequence number for v4l2
+ * @dec_dst_flag:	flags for buffers queued in the hardware
+ * @dec_src_buf_size:	size of the buffer for source buffers in decoding
+ * @codec_mode:		number of codec mode used by MFC hw
+ * @slice_interface:	slice interface flag
+ * @loop_filter_mpeg4:	loop filter for MPEG4 flag
+ * @display_delay:	value of the display delay for H264
+ * @display_delay_enable:	display delay for H264 enable flag
+ * @after_packed_pb:	flag used to track buffer when stream is in
+ *			Packed PB format
+ * @dpb_count:		count of the DPB buffers required by MFC hw
+ * @total_dpb_count:	count of DPB buffers with additional buffers
+ *			requested by the application
+ * @ctx_buf:		handle to the memory associated with this context
+ * @ctx_phys:		address of the memory associated with this context
+ * @ctx_size:		size of the memory associated with this context
+ * @desc_buf:		description buffer for decoding handle
+ * @desc_phys:		description buffer for decoding address
+ * @shm_alloc:		handle for the shared memory buffer
+ * @shm:		virtual address for the shared memory buffer
+ * @shm_ofs:		address offset for shared memory
+ * @enc_params:		encoding parameters for MFC
+ * @enc_dst_buf_size:	size of the buffers for encoder output
+ * @frame_type:		used to force the type of the next encoded frame
+ * @ref_queue:		list of the reference buffers for encoding
+ * @ref_queue_cnt:	number of the buffers in the reference list
+ * @c_ops:		ops for encoding
+ * @ctrls:		array of controls, used when adding controls to the
+ *			v4l2 control framework
+ * @ctrl_handler:	handler for v4l2 framework
+ */
+struct s5p_mfc_ctx {
+	struct s5p_mfc_dev *dev;
+	struct v4l2_fh fh;
+
+	int num;
+
+	int int_cond;
+	int int_type;
+	unsigned int int_err;
+	wait_queue_head_t queue;
+
+	struct s5p_mfc_fmt *src_fmt;
+	struct s5p_mfc_fmt *dst_fmt;
+
+	struct vb2_queue vq_src;
+	struct vb2_queue vq_dst;
+
+	struct list_head src_queue;
+	struct list_head dst_queue;
+
+	unsigned int src_queue_cnt;
+	unsigned int dst_queue_cnt;
+
+	enum s5p_mfc_inst_type type;
+	enum s5p_mfc_inst_state state;
+	int inst_no;
+
+	/* Image parameters */
+	int img_width;
+	int img_height;
+	int buf_width;
+	int buf_height;
+
+	int luma_size;
+	int chroma_size;
+	int mv_size;
+
+	unsigned long consumed_stream;
+
+	unsigned int dpb_flush_flag;
+
+	/* Buffers */
+	void *bank1_buf;
+	size_t bank1_phys;
+	size_t bank1_size;
+
+	void *bank2_buf;
+	size_t bank2_phys;
+	size_t bank2_size;
+
+	enum s5p_mfc_queue_state capture_state;
+	enum s5p_mfc_queue_state output_state;
+
+	struct s5p_mfc_buf src_bufs[MFC_MAX_BUFFERS];
+	int src_bufs_cnt;
+	struct s5p_mfc_buf dst_bufs[MFC_MAX_BUFFERS];
+	int dst_bufs_cnt;
+
+	unsigned int sequence;
+	unsigned long dec_dst_flag;
+	size_t dec_src_buf_size;
+
+	/* Control values */
+	int codec_mode;
+	int slice_interface;
+	int loop_filter_mpeg4;
+	int display_delay;
+	int display_delay_enable;
+	int after_packed_pb;
+
+	int dpb_count;
+	int total_dpb_count;
+
+	/* Buffers */
+	void *ctx_buf;
+	size_t ctx_phys;
+	size_t ctx_ofs;
+	size_t ctx_size;
+
+	void *desc_buf;
+	size_t desc_phys;
+
+
+	void *shm_alloc;
+	void *shm;
+	size_t shm_ofs;
+
+	struct s5p_mfc_enc_params enc_params;
+
+	size_t enc_dst_buf_size;
+
+	enum v4l2_mpeg_mfc51_video_force_frame_type force_frame_type;
+
+	struct list_head ref_queue;
+	unsigned int ref_queue_cnt;
+
+	struct s5p_mfc_codec_ops *c_ops;
+
+	struct v4l2_ctrl *ctrls[MFC_MAX_CTRLS];
+	struct v4l2_ctrl_handler ctrl_handler;
+};
+
+/*
+ * struct s5p_mfc_fmt -	structure used to store information about pixelformats
+ *			used by the MFC
+ */
+struct s5p_mfc_fmt {
+	char *name;
+	u32 fourcc;
+	u32 codec_mode;
+	enum s5p_mfc_fmt_type type;
+	u32 num_planes;
+};
+
+/**
+ * struct mfc_control -	structure used to store information about MFC controls
+ *			it is used to initialize the control framework.
+ */
+struct mfc_control {
+	__u32			id;
+	enum v4l2_ctrl_type	type;
+	__u8			name[32];  /* Whatever */
+	__s32			minimum;   /* Note signedness */
+	__s32			maximum;
+	__s32			step;
+	__u32			menu_skip_mask;
+	__s32			default_value;
+	__u32			flags;
+	__u32			reserved[2];
+	__u8			is_volatile;
+};
+
+
+#define fh_to_ctx(__fh) container_of(__fh, struct s5p_mfc_ctx, fh)
+#define ctrl_to_ctx(__ctrl) \
+	container_of((__ctrl)->handler, struct s5p_mfc_ctx, ctrl_handler)
+
+#endif /* S5P_MFC_COMMON_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
new file mode 100644
index 00000000000..5f4da80051b
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
@@ -0,0 +1,343 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_cmd.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_pm.h"
+
+static void *s5p_mfc_bitproc_buf;
+static size_t s5p_mfc_bitproc_phys;
+static unsigned char *s5p_mfc_bitproc_virt;
+
+/* Allocate and load firmware */
+int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev)
+{
+	struct firmware *fw_blob;
+	size_t bank2_base_phys;
+	void *b_base;
+	int err;
+
+	/* Firmare has to be present as a separate file or compiled
+	 * into kernel. */
+	mfc_debug_enter();
+	err = request_firmware((const struct firmware **)&fw_blob,
+				     "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+	if (err != 0) {
+		mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
+		return -EINVAL;
+	}
+	dev->fw_size = ALIGN(fw_blob->size, FIRMWARE_ALIGN);
+	if (s5p_mfc_bitproc_buf) {
+		mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n");
+		release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	s5p_mfc_bitproc_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], dev->fw_size);
+	if (IS_ERR(s5p_mfc_bitproc_buf)) {
+		s5p_mfc_bitproc_buf = 0;
+		mfc_err("Allocating bitprocessor buffer failed\n");
+		release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	s5p_mfc_bitproc_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], s5p_mfc_bitproc_buf);
+	if (s5p_mfc_bitproc_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) {
+		mfc_err("The base memory for bank 1 is not aligned to 128KB\n");
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		release_firmware(fw_blob);
+		return -EIO;
+	}
+	s5p_mfc_bitproc_virt = vb2_dma_contig_memops.vaddr(s5p_mfc_bitproc_buf);
+	if (!s5p_mfc_bitproc_virt) {
+		mfc_err("Bitprocessor memory remap failed\n");
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		release_firmware(fw_blob);
+		return -EIO;
+	}
+	dev->bank1 = s5p_mfc_bitproc_phys;
+	b_base = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], 1 << MFC_BANK2_ALIGN_ORDER);
+	if (IS_ERR(b_base)) {
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		mfc_err("Allocating bank2 base failed\n");
+	release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	bank2_base_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], b_base);
+	vb2_dma_contig_memops.put(b_base);
+	if (bank2_base_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) {
+		mfc_err("The base memory for bank 2 is not aligned to 128KB\n");
+		vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+		s5p_mfc_bitproc_phys = 0;
+		s5p_mfc_bitproc_buf = 0;
+		release_firmware(fw_blob);
+		return -EIO;
+	}
+	dev->bank2 = bank2_base_phys;
+	memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size);
+	wmb();
+	release_firmware(fw_blob);
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Reload firmware to MFC */
+int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev)
+{
+	struct firmware *fw_blob;
+	int err;
+
+	/* Firmare has to be present as a separate file or compiled
+	 * into kernel. */
+	mfc_debug_enter();
+	err = request_firmware((const struct firmware **)&fw_blob,
+				     "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+	if (err != 0) {
+		mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
+		return -EINVAL;
+	}
+	if (fw_blob->size > dev->fw_size) {
+		mfc_err("MFC firmware is too big to be loaded\n");
+		release_firmware(fw_blob);
+		return -ENOMEM;
+	}
+	if (s5p_mfc_bitproc_buf == 0 || s5p_mfc_bitproc_phys == 0) {
+		mfc_err("MFC firmware is not allocated or was not mapped correctly\n");
+		release_firmware(fw_blob);
+		return -EINVAL;
+	}
+	memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size);
+	wmb();
+	release_firmware(fw_blob);
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Release firmware memory */
+int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
+{
+	/* Before calling this function one has to make sure
+	 * that MFC is no longer processing */
+	if (!s5p_mfc_bitproc_buf)
+		return -EINVAL;
+	vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
+	s5p_mfc_bitproc_virt =  0;
+	s5p_mfc_bitproc_phys = 0;
+	s5p_mfc_bitproc_buf = 0;
+	return 0;
+}
+
+/* Reset the device */
+int s5p_mfc_reset(struct s5p_mfc_dev *dev)
+{
+	unsigned int mc_status;
+	unsigned long timeout;
+
+	mfc_debug_enter();
+	/* Stop procedure */
+	/*  reset RISC */
+	mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET);
+	/*  All reset except for MC */
+	mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET);
+	mdelay(10);
+
+	timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
+	/* Check MC status */
+	do {
+		if (time_after(jiffies, timeout)) {
+			mfc_err("Timeout while resetting MFC\n");
+			return -EIO;
+		}
+
+		mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS);
+
+	} while (mc_status & 0x3);
+
+	mfc_write(dev, 0x0, S5P_FIMV_SW_RESET);
+	mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET);
+	mfc_debug_leave();
+	return 0;
+}
+
+static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev)
+{
+	mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A);
+	mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B);
+	mfc_debug(2, "Bank1: %08x, Bank2: %08x\n", dev->bank1, dev->bank2);
+}
+
+static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev)
+{
+	mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID);
+	mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID);
+	mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
+	mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD);
+}
+
+/* Initialize hardware */
+int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
+{
+	unsigned int ver;
+	int ret;
+
+	mfc_debug_enter();
+	if (!s5p_mfc_bitproc_buf)
+		return -EINVAL;
+
+	/* 0. MFC reset */
+	mfc_debug(2, "MFC reset..\n");
+	s5p_mfc_clock_on();
+	ret = s5p_mfc_reset(dev);
+	if (ret) {
+		mfc_err("Failed to reset MFC - timeout\n");
+		return ret;
+	}
+	mfc_debug(2, "Done MFC reset..\n");
+	/* 1. Set DRAM base Addr */
+	s5p_mfc_init_memctrl(dev);
+	/* 2. Initialize registers of channel I/F */
+	s5p_mfc_clear_cmds(dev);
+	/* 3. Release reset signal to the RISC */
+	s5p_mfc_clean_dev_int_flags(dev);
+	mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
+	mfc_debug(2, "Will now wait for completion of firmware transfer\n");
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_FW_STATUS_RET)) {
+		mfc_err("Failed to load firmware\n");
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return -EIO;
+	}
+	s5p_mfc_clean_dev_int_flags(dev);
+	/* 4. Initialize firmware */
+	ret = s5p_mfc_sys_init_cmd(dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return ret;
+	}
+	mfc_debug(2, "Ok, now will write a command to init the system\n");
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SYS_INIT_RET)) {
+		mfc_err("Failed to load firmware\n");
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return -EIO;
+	}
+	dev->int_cond = 0;
+	if (dev->int_err != 0 || dev->int_type !=
+					S5P_FIMV_R2H_CMD_SYS_INIT_RET) {
+		/* Failure. */
+		mfc_err("Failed to init firmware - error: %d int: %d\n",
+						dev->int_err, dev->int_type);
+		s5p_mfc_reset(dev);
+		s5p_mfc_clock_off();
+		return -EIO;
+	}
+	ver = mfc_read(dev, S5P_FIMV_FW_VERSION);
+	mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n",
+		(ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF);
+	s5p_mfc_clock_off();
+	mfc_debug_leave();
+	return 0;
+}
+
+
+int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
+{
+	int ret;
+
+	mfc_debug_enter();
+	s5p_mfc_clock_on();
+	s5p_mfc_clean_dev_int_flags(dev);
+	ret = s5p_mfc_sleep_cmd(dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		return ret;
+	}
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SLEEP_RET)) {
+		mfc_err("Failed to sleep\n");
+		return -EIO;
+	}
+	s5p_mfc_clock_off();
+	dev->int_cond = 0;
+	if (dev->int_err != 0 || dev->int_type !=
+						S5P_FIMV_R2H_CMD_SLEEP_RET) {
+		/* Failure. */
+		mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err,
+								dev->int_type);
+		return -EIO;
+	}
+	mfc_debug_leave();
+	return ret;
+}
+
+int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
+{
+	int ret;
+
+	mfc_debug_enter();
+	/* 0. MFC reset */
+	mfc_debug(2, "MFC reset..\n");
+	s5p_mfc_clock_on();
+	ret = s5p_mfc_reset(dev);
+	if (ret) {
+		mfc_err("Failed to reset MFC - timeout\n");
+		return ret;
+	}
+	mfc_debug(2, "Done MFC reset..\n");
+	/* 1. Set DRAM base Addr */
+	s5p_mfc_init_memctrl(dev);
+	/* 2. Initialize registers of channel I/F */
+	s5p_mfc_clear_cmds(dev);
+	s5p_mfc_clean_dev_int_flags(dev);
+	/* 3. Initialize firmware */
+	ret = s5p_mfc_wakeup_cmd(dev);
+	if (ret) {
+		mfc_err("Failed to send command to MFC - timeout\n");
+		return ret;
+	}
+	/* 4. Release reset signal to the RISC */
+	mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
+	mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
+	if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_WAKEUP_RET)) {
+		mfc_err("Failed to load firmware\n");
+		return -EIO;
+	}
+	s5p_mfc_clock_off();
+	dev->int_cond = 0;
+	if (dev->int_err != 0 || dev->int_type !=
+						S5P_FIMV_R2H_CMD_WAKEUP_RET) {
+		/* Failure. */
+		mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err,
+								dev->int_type);
+		return -EIO;
+	}
+	mfc_debug_leave();
+	return 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h
new file mode 100644
index 00000000000..61dc23b7ee5
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h
@@ -0,0 +1,29 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_CTRL_H
+#define S5P_MFC_CTRL_H
+
+#include "s5p_mfc_common.h"
+
+int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev);
+int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev);
+int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_init_hw(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_sleep(struct s5p_mfc_dev *dev);
+int s5p_mfc_wakeup(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_reset(struct s5p_mfc_dev *dev);
+
+#endif /* S5P_MFC_CTRL_H */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_debug.h b/drivers/media/video/s5p-mfc/s5p_mfc_debug.h
new file mode 100644
index 00000000000..ecb8616a492
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_debug.h
@@ -0,0 +1,48 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_debug.h
+ *
+ * Header file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * This file contains debug macros
+ *
+ * Kamil Debski, Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_MFC_DEBUG_H_
+#define S5P_MFC_DEBUG_H_
+
+#define DEBUG
+
+#ifdef DEBUG
+extern int debug;
+
+#define mfc_debug(level, fmt, args...)				\
+	do {							\
+		if (debug >= level)				\
+			printk(KERN_DEBUG "%s:%d: " fmt,	\
+				__func__, __LINE__, ##args);	\
+	} while (0)
+#else
+#define mfc_debug(level, fmt, args...)
+#endif
+
+#define mfc_debug_enter() mfc_debug(5, "enter")
+#define mfc_debug_leave() mfc_debug(5, "leave")
+
+#define mfc_err(fmt, args...)				\
+	do {						\
+		printk(KERN_ERR "%s:%d: " fmt,		\
+		       __func__, __LINE__, ##args);	\
+	} while (0)
+
+#define mfc_info(fmt, args...)				\
+	do {						\
+		printk(KERN_INFO "%s:%d: " fmt,		\
+		       __func__, __LINE__, ##args);	\
+	} while (0)
+
+#endif /* S5P_MFC_DEBUG_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
new file mode 100644
index 00000000000..b2c5052a9c4
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -0,0 +1,1036 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ * Kamil Debski, <k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-core.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_dec.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+#include "s5p_mfc_pm.h"
+#include "s5p_mfc_shm.h"
+
+static struct s5p_mfc_fmt formats[] = {
+	{
+		.name		= "4:2:0 2 Planes 64x32 Tiles",
+		.fourcc		= V4L2_PIX_FMT_NV12MT,
+		.codec_mode	= S5P_FIMV_CODEC_NONE,
+		.type		= MFC_FMT_RAW,
+		.num_planes	= 2,
+	 },
+	{
+		.name = "4:2:0 2 Planes",
+		.fourcc = V4L2_PIX_FMT_NV12M,
+		.codec_mode = S5P_FIMV_CODEC_NONE,
+		.type = MFC_FMT_RAW,
+		.num_planes = 2,
+	},
+	{
+		.name = "H264 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H264,
+		.codec_mode = S5P_FIMV_CODEC_H264_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "H263 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H263,
+		.codec_mode = S5P_FIMV_CODEC_H263_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG1 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG1,
+		.codec_mode = S5P_FIMV_CODEC_MPEG2_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG2 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG2,
+		.codec_mode = S5P_FIMV_CODEC_MPEG2_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG4 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG4,
+		.codec_mode = S5P_FIMV_CODEC_MPEG4_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "XviD Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_XVID,
+		.codec_mode = S5P_FIMV_CODEC_MPEG4_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "VC1 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_VC1_ANNEX_G,
+		.codec_mode = S5P_FIMV_CODEC_VC1_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+	{
+		.name = "VC1 RCV Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_VC1_ANNEX_L,
+		.codec_mode = S5P_FIMV_CODEC_VC1RCV_DEC,
+		.type = MFC_FMT_DEC,
+		.num_planes = 1,
+	},
+};
+
+#define NUM_FORMATS ARRAY_SIZE(formats)
+
+/* Find selected format description */
+static struct s5p_mfc_fmt *find_format(struct v4l2_format *f, unsigned int t)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_FORMATS; i++) {
+		if (formats[i].fourcc == f->fmt.pix_mp.pixelformat &&
+		    formats[i].type == t)
+			return &formats[i];
+	}
+	return NULL;
+}
+
+static struct mfc_control controls[] = {
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H264 Display Delay",
+		.minimum = 0,
+		.maximum = 16383,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Display Delay Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Mpeg4 Loop Filter Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Slice Interface Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Minimum number of cap bufs",
+		.minimum = 1,
+		.maximum = 32,
+		.step = 1,
+		.default_value = 1,
+		.is_volatile = 1,
+	},
+};
+
+#define NUM_CTRLS ARRAY_SIZE(controls)
+
+/* Check whether a context should be run on hardware */
+static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
+{
+	/* Context is to parse header */
+	if (ctx->src_queue_cnt >= 1 && ctx->state == MFCINST_GOT_INST)
+		return 1;
+	/* Context is to decode a frame */
+	if (ctx->src_queue_cnt >= 1 &&
+	    ctx->state == MFCINST_RUNNING &&
+	    ctx->dst_queue_cnt >= ctx->dpb_count)
+		return 1;
+	/* Context is to return last frame */
+	if (ctx->state == MFCINST_FINISHING &&
+	    ctx->dst_queue_cnt >= ctx->dpb_count)
+		return 1;
+	/* Context is to set buffers */
+	if (ctx->src_queue_cnt >= 1 &&
+	    ctx->state == MFCINST_HEAD_PARSED &&
+	    ctx->capture_state == QUEUE_BUFS_MMAPED)
+		return 1;
+	/* Resolution change */
+	if ((ctx->state == MFCINST_RES_CHANGE_INIT ||
+		ctx->state == MFCINST_RES_CHANGE_FLUSH) &&
+		ctx->dst_queue_cnt >= ctx->dpb_count)
+		return 1;
+	if (ctx->state == MFCINST_RES_CHANGE_END &&
+		ctx->src_queue_cnt >= 1)
+		return 1;
+	mfc_debug(2, "ctx is not ready\n");
+	return 0;
+}
+
+static struct s5p_mfc_codec_ops decoder_codec_ops = {
+	.pre_seq_start		= NULL,
+	.post_seq_start		= NULL,
+	.pre_frame_start	= NULL,
+	.post_frame_start	= NULL,
+};
+
+/* Query capabilities of the device */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+
+	strncpy(cap->driver, dev->plat_dev->name, sizeof(cap->driver) - 1);
+	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
+	cap->bus_info[0] = 0;
+	cap->version = KERNEL_VERSION(1, 0, 0);
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT
+						    | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+/* Enumerate format */
+static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool mplane, bool out)
+{
+	struct s5p_mfc_fmt *fmt;
+	int i, j = 0;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (mplane && formats[i].num_planes == 1)
+			continue;
+		else if (!mplane && formats[i].num_planes > 1)
+			continue;
+		if (out && formats[i].type != MFC_FMT_DEC)
+			continue;
+		else if (!out && formats[i].type != MFC_FMT_RAW)
+			continue;
+
+		if (j == f->index)
+			break;
+		++j;
+	}
+	if (i == ARRAY_SIZE(formats))
+		return -EINVAL;
+	fmt = &formats[i];
+	strlcpy(f->description, fmt->name, sizeof(f->description));
+	f->pixelformat = fmt->fourcc;
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *pirv,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, false);
+}
+
+static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, false);
+}
+
+static int vidioc_enum_fmt_vid_out(struct file *file, void *prov,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, true);
+}
+
+static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov,
+							struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, true);
+}
+
+/* Get format */
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct v4l2_pix_format_mplane *pix_mp;
+
+	mfc_debug_enter();
+	pix_mp = &f->fmt.pix_mp;
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
+	    (ctx->state == MFCINST_GOT_INST || ctx->state ==
+						MFCINST_RES_CHANGE_END)) {
+		/* If the MFC is parsing the header,
+		 * so wait until it is finished */
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_SEQ_DONE_RET,
+									0);
+	}
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
+	    ctx->state >= MFCINST_HEAD_PARSED &&
+	    ctx->state < MFCINST_ABORT) {
+		/* This is run on CAPTURE (decode output) */
+		/* Width and height are set to the dimensions
+		   of the movie, the buffer is bigger and
+		   further processing stages should crop to this
+		   rectangle. */
+		pix_mp->width = ctx->buf_width;
+		pix_mp->height = ctx->buf_height;
+		pix_mp->field = V4L2_FIELD_NONE;
+		pix_mp->num_planes = 2;
+		/* Set pixelformat to the format in which MFC
+		   outputs the decoded frame */
+		pix_mp->pixelformat = V4L2_PIX_FMT_NV12MT;
+		pix_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+		pix_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+		pix_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+		pix_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* This is run on OUTPUT
+		   The buffer contains compressed image
+		   so width and height have no meaning */
+		pix_mp->width = 0;
+		pix_mp->height = 0;
+		pix_mp->field = V4L2_FIELD_NONE;
+		pix_mp->plane_fmt[0].bytesperline = ctx->dec_src_buf_size;
+		pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size;
+		pix_mp->pixelformat = ctx->src_fmt->fourcc;
+		pix_mp->num_planes = ctx->src_fmt->num_planes;
+	} else {
+		mfc_err("Format could not be read\n");
+		mfc_debug(2, "%s-- with error\n", __func__);
+		return -EINVAL;
+	}
+	mfc_debug_leave();
+	return 0;
+}
+
+/* Try format */
+static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_fmt *fmt;
+
+	if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		mfc_err("This node supports decoding only\n");
+		return -EINVAL;
+	}
+	fmt = find_format(f, MFC_FMT_DEC);
+	if (!fmt) {
+		mfc_err("Unsupported format\n");
+		return -EINVAL;
+	}
+	if (fmt->type != MFC_FMT_DEC) {
+		mfc_err("\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Set format */
+static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+	struct s5p_mfc_fmt *fmt;
+	struct v4l2_pix_format_mplane *pix_mp;
+
+	mfc_debug_enter();
+	ret = vidioc_try_fmt(file, priv, f);
+	pix_mp = &f->fmt.pix_mp;
+	if (ret)
+		return ret;
+	if (ctx->vq_src.streaming || ctx->vq_dst.streaming) {
+		v4l2_err(&dev->v4l2_dev, "%s queue busy\n", __func__);
+		ret = -EBUSY;
+		goto out;
+	}
+	fmt = find_format(f, MFC_FMT_DEC);
+	if (!fmt || fmt->codec_mode == S5P_FIMV_CODEC_NONE) {
+		mfc_err("Unknown codec\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	if (fmt->type != MFC_FMT_DEC) {
+		mfc_err("Wrong format selected, you should choose "
+					"format for decoding\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	ctx->src_fmt = fmt;
+	ctx->codec_mode = fmt->codec_mode;
+	mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode);
+	pix_mp->height = 0;
+	pix_mp->width = 0;
+	if (pix_mp->plane_fmt[0].sizeimage)
+		ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage;
+	else
+		pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size =
+								DEF_CPB_SIZE;
+	pix_mp->plane_fmt[0].bytesperline = 0;
+	ctx->state = MFCINST_INIT;
+out:
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Reqeust buffers */
+static int vidioc_reqbufs(struct file *file, void *priv,
+					  struct v4l2_requestbuffers *reqbufs)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+	unsigned long flags;
+
+	if (reqbufs->memory != V4L2_MEMORY_MMAP) {
+		mfc_err("Only V4L2_MEMORY_MAP is supported\n");
+		return -EINVAL;
+	}
+	if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* Can only request buffers after an instance has been opened.*/
+		if (ctx->state == MFCINST_INIT) {
+			ctx->src_bufs_cnt = 0;
+			if (reqbufs->count == 0) {
+				mfc_debug(2, "Freeing buffers\n");
+				s5p_mfc_clock_on();
+				ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+				s5p_mfc_clock_off();
+				return ret;
+			}
+			/* Decoding */
+			if (ctx->output_state != QUEUE_FREE) {
+				mfc_err("Bufs have already been requested\n");
+				return -EINVAL;
+			}
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+			s5p_mfc_clock_off();
+			if (ret) {
+				mfc_err("vb2_reqbufs on output failed\n");
+				return ret;
+			}
+			mfc_debug(2, "vb2_reqbufs: %d\n", ret);
+			ctx->output_state = QUEUE_BUFS_REQUESTED;
+		}
+	} else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ctx->dst_bufs_cnt = 0;
+		if (reqbufs->count == 0) {
+			mfc_debug(2, "Freeing buffers\n");
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_clock_off();
+			return ret;
+		}
+		if (ctx->capture_state != QUEUE_FREE) {
+			mfc_err("Bufs have already been requested\n");
+			return -EINVAL;
+		}
+		ctx->capture_state = QUEUE_BUFS_REQUESTED;
+		s5p_mfc_clock_on();
+		ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+		s5p_mfc_clock_off();
+		if (ret) {
+			mfc_err("vb2_reqbufs on capture failed\n");
+			return ret;
+		}
+		if (reqbufs->count < ctx->dpb_count) {
+			mfc_err("Not enough buffers allocated\n");
+			reqbufs->count = 0;
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_clock_off();
+			return -ENOMEM;
+		}
+		ctx->total_dpb_count = reqbufs->count;
+		ret = s5p_mfc_alloc_codec_buffers(ctx);
+		if (ret) {
+			mfc_err("Failed to allocate decoding buffers\n");
+			reqbufs->count = 0;
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_clock_off();
+			return -ENOMEM;
+		}
+		if (ctx->dst_bufs_cnt == ctx->total_dpb_count) {
+			ctx->capture_state = QUEUE_BUFS_MMAPED;
+		} else {
+			mfc_err("Not all buffers passed to buf_init\n");
+			reqbufs->count = 0;
+			s5p_mfc_clock_on();
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			s5p_mfc_release_codec_buffers(ctx);
+			s5p_mfc_clock_off();
+			return -ENOMEM;
+		}
+		if (s5p_mfc_ctx_ready(ctx)) {
+			spin_lock_irqsave(&dev->condlock, flags);
+			set_bit(ctx->num, &dev->ctx_work_bits);
+			spin_unlock_irqrestore(&dev->condlock, flags);
+		}
+		s5p_mfc_try_run(dev);
+		s5p_mfc_wait_for_done_ctx(ctx,
+					 S5P_FIMV_R2H_CMD_INIT_BUFFERS_RET, 0);
+	}
+	return ret;
+}
+
+/* Query buffer */
+static int vidioc_querybuf(struct file *file, void *priv,
+						   struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret;
+	int i;
+
+	if (buf->memory != V4L2_MEMORY_MMAP) {
+		mfc_err("Only mmaped buffers can be used\n");
+		return -EINVAL;
+	}
+	mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type);
+	if (ctx->state == MFCINST_INIT &&
+			buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = vb2_querybuf(&ctx->vq_src, buf);
+	} else if (ctx->state == MFCINST_RUNNING &&
+			buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ret = vb2_querybuf(&ctx->vq_dst, buf);
+		for (i = 0; i < buf->length; i++)
+			buf->m.planes[i].m.mem_offset += DST_QUEUE_OFF_BASE;
+	} else {
+		mfc_err("vidioc_querybuf called in an inappropriate state\n");
+		ret = -EINVAL;
+	}
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Queue a buffer */
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on QBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_qbuf(&ctx->vq_src, buf);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_qbuf(&ctx->vq_dst, buf);
+	return -EINVAL;
+}
+
+/* Dequeue a buffer */
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on DQBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK);
+	return -EINVAL;
+}
+
+/* Stream on */
+static int vidioc_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	mfc_debug_enter();
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+
+		if (ctx->state == MFCINST_INIT) {
+			ctx->dst_bufs_cnt = 0;
+			ctx->src_bufs_cnt = 0;
+			ctx->capture_state = QUEUE_FREE;
+			ctx->output_state = QUEUE_FREE;
+			s5p_mfc_alloc_instance_buffer(ctx);
+			s5p_mfc_alloc_dec_temp_buffers(ctx);
+			spin_lock_irqsave(&dev->condlock, flags);
+			set_bit(ctx->num, &dev->ctx_work_bits);
+			spin_unlock_irqrestore(&dev->condlock, flags);
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			s5p_mfc_try_run(dev);
+
+			if (s5p_mfc_wait_for_done_ctx(ctx,
+				S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET, 0)) {
+				/* Error or timeout */
+				mfc_err("Error getting instance from hardware\n");
+				s5p_mfc_release_instance_buffer(ctx);
+				s5p_mfc_release_dec_desc_buffer(ctx);
+				return -EIO;
+			}
+			mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
+		}
+		ret = vb2_streamon(&ctx->vq_src, type);
+		}
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		ret = vb2_streamon(&ctx->vq_dst, type);
+	mfc_debug_leave();
+	return ret;
+}
+
+/* Stream off, which equals to a pause */
+static int vidioc_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_streamoff(&ctx->vq_src, type);
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_streamoff(&ctx->vq_dst, type);
+	return -EINVAL;
+}
+
+/* Set controls - v4l2 control framework */
+static int s5p_mfc_dec_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
+		ctx->loop_filter_mpeg4 = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
+		ctx->display_delay_enable = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
+		ctx->display_delay = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
+		ctx->slice_interface = ctrl->val;
+		break;
+	default:
+		mfc_err("Invalid control 0x%08x\n", ctrl->id);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_dec_g_v_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
+		if (ctx->state >= MFCINST_HEAD_PARSED &&
+		    ctx->state < MFCINST_ABORT) {
+			ctrl->val = ctx->dpb_count;
+			break;
+		} else if (ctx->state != MFCINST_INIT) {
+			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
+			return -EINVAL;
+		}
+		/* Should wait for the header to be parsed */
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_wait_for_done_ctx(ctx,
+				S5P_FIMV_R2H_CMD_SEQ_DONE_RET, 0);
+		if (ctx->state >= MFCINST_HEAD_PARSED &&
+		    ctx->state < MFCINST_ABORT) {
+			ctrl->val = ctx->dpb_count;
+		} else {
+			v4l2_err(&dev->v4l2_dev, "Decoding not initialised\n");
+			return -EINVAL;
+		}
+		break;
+	}
+	return 0;
+}
+
+
+static const struct v4l2_ctrl_ops s5p_mfc_dec_ctrl_ops = {
+	.s_ctrl = s5p_mfc_dec_s_ctrl,
+	.g_volatile_ctrl = s5p_mfc_dec_g_v_ctrl,
+};
+
+/* Get cropping information */
+static int vidioc_g_crop(struct file *file, void *priv,
+		struct v4l2_crop *cr)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	u32 left, right, top, bottom;
+
+	if (ctx->state != MFCINST_HEAD_PARSED &&
+	ctx->state != MFCINST_RUNNING && ctx->state != MFCINST_FINISHING
+					&& ctx->state != MFCINST_FINISHED) {
+			mfc_err("Cannont set crop\n");
+			return -EINVAL;
+		}
+	if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_H264) {
+		left = s5p_mfc_read_shm(ctx, CROP_INFO_H);
+		right = left >> S5P_FIMV_SHARED_CROP_RIGHT_SHIFT;
+		left = left & S5P_FIMV_SHARED_CROP_LEFT_MASK;
+		top = s5p_mfc_read_shm(ctx, CROP_INFO_V);
+		bottom = top >> S5P_FIMV_SHARED_CROP_BOTTOM_SHIFT;
+		top = top & S5P_FIMV_SHARED_CROP_TOP_MASK;
+		cr->c.left = left;
+		cr->c.top = top;
+		cr->c.width = ctx->img_width - left - right;
+		cr->c.height = ctx->img_height - top - bottom;
+		mfc_debug(2, "Cropping info [h264]: l=%d t=%d "
+			"w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
+			cr->c.width, cr->c.height, right, bottom,
+			ctx->buf_width, ctx->buf_height);
+	} else {
+		cr->c.left = 0;
+		cr->c.top = 0;
+		cr->c.width = ctx->img_width;
+		cr->c.height = ctx->img_height;
+		mfc_debug(2, "Cropping info: w=%d h=%d fw=%d "
+			"fh=%d\n", cr->c.width,	cr->c.height, ctx->buf_width,
+							ctx->buf_height);
+	}
+	return 0;
+}
+
+/* v4l2_ioctl_ops */
+static const struct v4l2_ioctl_ops s5p_mfc_dec_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane,
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
+	.vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane,
+	.vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt,
+	.vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt,
+	.vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt,
+	.vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt,
+	.vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt,
+	.vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt,
+	.vidioc_reqbufs = vidioc_reqbufs,
+	.vidioc_querybuf = vidioc_querybuf,
+	.vidioc_qbuf = vidioc_qbuf,
+	.vidioc_dqbuf = vidioc_dqbuf,
+	.vidioc_streamon = vidioc_streamon,
+	.vidioc_streamoff = vidioc_streamoff,
+	.vidioc_g_crop = vidioc_g_crop,
+};
+
+static int s5p_mfc_queue_setup(struct vb2_queue *vq, unsigned int *buf_count,
+			       unsigned int *plane_count, unsigned long psize[],
+			       void *allocators[])
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+
+	/* Video output for decoding (source)
+	 * this can be set after getting an instance */
+	if (ctx->state == MFCINST_INIT &&
+	    vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* A single plane is required for input */
+		*plane_count = 1;
+		if (*buf_count < 1)
+			*buf_count = 1;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+	/* Video capture for decoding (destination)
+	 * this can be set after the header was parsed */
+	} else if (ctx->state == MFCINST_HEAD_PARSED &&
+		   vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		/* Output plane count is 2 - one for Y and one for CbCr */
+		*plane_count = 2;
+		/* Setup buffer count */
+		if (*buf_count < ctx->dpb_count)
+			*buf_count = ctx->dpb_count;
+		if (*buf_count > ctx->dpb_count + MFC_MAX_EXTRA_DPB)
+			*buf_count = ctx->dpb_count + MFC_MAX_EXTRA_DPB;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+	} else {
+		mfc_err("State seems invalid. State = %d, vq->type = %d\n",
+							ctx->state, vq->type);
+		return -EINVAL;
+	}
+	mfc_debug(2, "Buffer count=%d, plane count=%d\n",
+						*buf_count, *plane_count);
+	if (ctx->state == MFCINST_HEAD_PARSED &&
+	    vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		psize[0] = ctx->luma_size;
+		psize[1] = ctx->chroma_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX];
+		allocators[1] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE &&
+		   ctx->state == MFCINST_INIT) {
+		psize[0] = ctx->dec_src_buf_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+	} else {
+		mfc_err("This video node is dedicated to decoding. Decoding not initalised\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void s5p_mfc_unlock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_unlock(&dev->mfc_mutex);
+}
+
+static void s5p_mfc_lock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_lock(&dev->mfc_mutex);
+}
+
+static int s5p_mfc_buf_init(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	unsigned int i;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->capture_state == QUEUE_BUFS_MMAPED)
+			return 0;
+		for (i = 0; i <= ctx->src_fmt->num_planes ; i++) {
+			if (IS_ERR_OR_NULL(ERR_PTR(
+					vb2_dma_contig_plane_paddr(vb, i)))) {
+				mfc_err("Plane mem not allocated\n");
+				return -EINVAL;
+			}
+		}
+		if (vb2_plane_size(vb, 0) < ctx->luma_size ||
+			vb2_plane_size(vb, 1) < ctx->chroma_size) {
+			mfc_err("Plane buffer (CAPTURE) is too small\n");
+			return -EINVAL;
+		}
+		i = vb->v4l2_buf.index;
+		ctx->dst_bufs[i].b = vb;
+		ctx->dst_bufs[i].cookie.raw.luma =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->dst_bufs[i].cookie.raw.chroma =
+					vb2_dma_contig_plane_paddr(vb, 1);
+		ctx->dst_bufs_cnt++;
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (IS_ERR_OR_NULL(ERR_PTR(
+					vb2_dma_contig_plane_paddr(vb, 0)))) {
+			mfc_err("Plane memory not allocated\n");
+			return -EINVAL;
+		}
+		if (vb2_plane_size(vb, 0) < ctx->dec_src_buf_size) {
+			mfc_err("Plane buffer (OUTPUT) is too small\n");
+			return -EINVAL;
+		}
+
+		i = vb->v4l2_buf.index;
+		ctx->src_bufs[i].b = vb;
+		ctx->src_bufs[i].cookie.stream =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->src_bufs_cnt++;
+	} else {
+		mfc_err("s5p_mfc_buf_init: unknown queue type\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_start_streaming(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+
+	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
+	if (ctx->state == MFCINST_FINISHING ||
+		ctx->state == MFCINST_FINISHED)
+		ctx->state = MFCINST_RUNNING;
+	/* If context is ready then dev = work->data;schedule it to run */
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+	return 0;
+}
+
+static int s5p_mfc_stop_streaming(struct vb2_queue *q)
+{
+	unsigned long flags;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	int aborted = 0;
+
+	if ((ctx->state == MFCINST_FINISHING ||
+		ctx->state ==  MFCINST_RUNNING) &&
+		dev->curr_ctx == ctx->num && dev->hw_lock) {
+		ctx->state = MFCINST_ABORT;
+		s5p_mfc_wait_for_done_ctx(ctx,
+					S5P_FIMV_R2H_CMD_FRAME_DONE_RET, 0);
+		aborted = 1;
+	}
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		INIT_LIST_HEAD(&ctx->dst_queue);
+		ctx->dst_queue_cnt = 0;
+		ctx->dpb_flush_flag = 1;
+		ctx->dec_dst_flag = 0;
+	}
+	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		INIT_LIST_HEAD(&ctx->src_queue);
+		ctx->src_queue_cnt = 0;
+	}
+	if (aborted)
+		ctx->state = MFCINST_RUNNING;
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	return 0;
+}
+
+
+static void s5p_mfc_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *mfc_buf;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		spin_lock_irqsave(&dev->irqlock, flags);
+		list_add_tail(&mfc_buf->list, &ctx->src_queue);
+		ctx->src_queue_cnt++;
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		/* Mark destination as available for use by MFC */
+		spin_lock_irqsave(&dev->irqlock, flags);
+		set_bit(vb->v4l2_buf.index, &ctx->dec_dst_flag);
+		list_add_tail(&mfc_buf->list, &ctx->dst_queue);
+		ctx->dst_queue_cnt++;
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else {
+		mfc_err("Unsupported buffer type (%d)\n", vq->type);
+	}
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+}
+
+static struct vb2_ops s5p_mfc_dec_qops = {
+	.queue_setup		= s5p_mfc_queue_setup,
+	.wait_prepare		= s5p_mfc_unlock,
+	.wait_finish		= s5p_mfc_lock,
+	.buf_init		= s5p_mfc_buf_init,
+	.start_streaming	= s5p_mfc_start_streaming,
+	.stop_streaming		= s5p_mfc_stop_streaming,
+	.buf_queue		= s5p_mfc_buf_queue,
+};
+
+struct s5p_mfc_codec_ops *get_dec_codec_ops(void)
+{
+	return &decoder_codec_ops;
+}
+
+struct vb2_ops *get_dec_queue_ops(void)
+{
+	return &s5p_mfc_dec_qops;
+}
+
+const struct v4l2_ioctl_ops *get_dec_v4l2_ioctl_ops(void)
+{
+	return &s5p_mfc_dec_ioctl_ops;
+}
+
+#define IS_MFC51_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) \
+						&& V4L2_CTRL_DRIVER_PRIV(x))
+
+int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx)
+{
+	struct v4l2_ctrl_config cfg;
+	int i;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, NUM_CTRLS);
+	if (ctx->ctrl_handler.error) {
+		mfc_err("v4l2_ctrl_handler_init failed\n");
+		return ctx->ctrl_handler.error;
+	}
+
+	for (i = 0; i < NUM_CTRLS; i++) {
+		if (IS_MFC51_PRIV(controls[i].id)) {
+			cfg.ops = &s5p_mfc_dec_ctrl_ops;
+			cfg.id = controls[i].id;
+			cfg.min = controls[i].minimum;
+			cfg.max = controls[i].maximum;
+			cfg.def = controls[i].default_value;
+			cfg.name = controls[i].name;
+			cfg.type = controls[i].type;
+
+			cfg.step = controls[i].step;
+			cfg.menu_skip_mask = 0;
+
+			ctx->ctrls[i] = v4l2_ctrl_new_custom(&ctx->ctrl_handler,
+					&cfg, NULL);
+		} else {
+			ctx->ctrls[i] = v4l2_ctrl_new_std(&ctx->ctrl_handler,
+					&s5p_mfc_dec_ctrl_ops,
+					controls[i].id, controls[i].minimum,
+					controls[i].maximum, controls[i].step,
+					controls[i].default_value);
+		}
+		if (ctx->ctrl_handler.error) {
+			mfc_err("Adding control (%d) failed\n", i);
+			return ctx->ctrl_handler.error;
+		}
+		if (controls[i].is_volatile && ctx->ctrls[i])
+			ctx->ctrls[i]->is_volatile = 1;
+	}
+	return 0;
+}
+
+void s5p_mfc_dec_ctrls_delete(struct s5p_mfc_ctx *ctx)
+{
+	int i;
+
+	v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+	for (i = 0; i < NUM_CTRLS; i++)
+		ctx->ctrls[i] = NULL;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.h b/drivers/media/video/s5p-mfc/s5p_mfc_dec.h
new file mode 100644
index 00000000000..fb8b215db0e
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.h
@@ -0,0 +1,23 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_dec.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_DEC_H_
+#define S5P_MFC_DEC_H_
+
+struct s5p_mfc_codec_ops *get_dec_codec_ops(void);
+struct vb2_ops *get_dec_queue_ops(void);
+const struct v4l2_ioctl_ops *get_dec_v4l2_ioctl_ops(void);
+struct s5p_mfc_fmt *get_dec_def_fmt(bool src);
+int s5p_mfc_dec_ctrls_setup(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_dec_ctrls_delete(struct s5p_mfc_ctx *ctx);
+
+#endif /* S5P_MFC_DEC_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
new file mode 100644
index 00000000000..fee094a14f4
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -0,0 +1,1829 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Jeongtae Park	<jtp.park@samsung.com>
+ * Kamil Debski		<k.debski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/version.h>
+#include <linux/videodev2.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-ctrls.h>
+#include <media/videobuf2-core.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_enc.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+
+static struct s5p_mfc_fmt formats[] = {
+	{
+		.name = "4:2:0 2 Planes 64x32 Tiles",
+		.fourcc = V4L2_PIX_FMT_NV12MT,
+		.codec_mode = S5P_FIMV_CODEC_NONE,
+		.type = MFC_FMT_RAW,
+		.num_planes = 2,
+	},
+	{
+		.name = "4:2:0 2 Planes",
+		.fourcc = V4L2_PIX_FMT_NV12M,
+		.codec_mode = S5P_FIMV_CODEC_NONE,
+		.type = MFC_FMT_RAW,
+		.num_planes = 2,
+	},
+	{
+		.name = "H264 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H264,
+		.codec_mode = S5P_FIMV_CODEC_H264_ENC,
+		.type = MFC_FMT_ENC,
+		.num_planes = 1,
+	},
+	{
+		.name = "MPEG4 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_MPEG4,
+		.codec_mode = S5P_FIMV_CODEC_MPEG4_ENC,
+		.type = MFC_FMT_ENC,
+		.num_planes = 1,
+	},
+	{
+		.name = "H264 Encoded Stream",
+		.fourcc = V4L2_PIX_FMT_H263,
+		.codec_mode = S5P_FIMV_CODEC_H263_ENC,
+		.type = MFC_FMT_ENC,
+		.num_planes = 1,
+	},
+};
+
+#define NUM_FORMATS ARRAY_SIZE(formats)
+static struct s5p_mfc_fmt *find_format(struct v4l2_format *f, unsigned int t)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_FORMATS; i++) {
+		if (formats[i].fourcc == f->fmt.pix_mp.pixelformat &&
+		    formats[i].type == t)
+			return &formats[i];
+	}
+	return NULL;
+}
+
+static struct mfc_control controls[] = {
+	{
+		.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE,
+		.maximum = V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES,
+		.default_value = V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 1,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 1900,
+		.maximum = (1 << 30) - 1,
+		.step = 1,
+		.default_value = 1900,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_PADDING,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Padding Control Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Padding Color YUV Value",
+		.minimum = 0,
+		.maximum = (1 << 25) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_BITRATE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 1,
+		.maximum = (1 << 30) - 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Rate Control Reaction Coeff.",
+		.minimum = 1,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.name = "Force frame type",
+		.minimum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED,
+		.maximum = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED,
+		.default_value = V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_VBV_SIZE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_HEADER_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE,
+		.maximum = V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME,
+		.default_value = V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.name = "Frame Skip Enable",
+		.minimum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED,
+		.maximum = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT,
+		.menu_skip_mask = 0,
+		.default_value = V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Fixed Target Bit Enable",
+		.minimum = 0,
+		.maximum = 1,
+		.default_value = 0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_B_FRAMES,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 2,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
+		.maximum = V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH,
+		.default_value = V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE,
+		.menu_skip_mask = ~(
+				(1 << V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
+				(1 << V4L2_MPEG_VIDEO_H264_PROFILE_MAIN) |
+				(1 << V4L2_MPEG_VIDEO_H264_PROFILE_HIGH)
+				),
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
+		.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
+		.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
+		.menu_skip_mask = ~(
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
+				(1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
+				),
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0,
+		.maximum = V4L2_MPEG_VIDEO_MPEG4_LEVEL_5,
+		.default_value = V4L2_MPEG_VIDEO_MPEG4_LEVEL_0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED,
+		.maximum = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
+		.default_value = V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = -6,
+		.maximum = 6,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = -6,
+		.maximum = 6,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC,
+		.maximum = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC,
+		.default_value = V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "The Number of Ref. Pic for P",
+		.minimum = 1,
+		.maximum = 2,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_MIN_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_MAX_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 I-Frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_MIN_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 Minimum QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_MAX_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 Maximum QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 P frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "H263 B frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 I-Frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 Minimum QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 Maximum QP value",
+		.minimum = 0,
+		.maximum = 51,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 P frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "MPEG4 B frame QP value",
+		.minimum = 1,
+		.maximum = 31,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Dark Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Smooth Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Static Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "H264 Activity Reg Adaptive RC",
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
+		.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
+		.default_value = 0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 1,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_H264_I_PERIOD,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.minimum = 0,
+		.maximum = (1 << 16) - 1,
+		.step = 1,
+		.default_value = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE,
+		.type = V4L2_CTRL_TYPE_MENU,
+		.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
+		.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
+		.default_value = 0,
+		.menu_skip_mask = 0,
+	},
+	{
+		.id = V4L2_CID_MPEG_VIDEO_MPEG4_QPEL,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.minimum = 0,
+		.maximum = 1,
+		.step = 1,
+		.default_value = 0,
+	},
+};
+
+#define NUM_CTRLS ARRAY_SIZE(controls)
+static const char * const *mfc51_get_menu(u32 id)
+{
+	static const char * const mfc51_video_frame_skip[] = {
+		"Disabled",
+		"Level Limit",
+		"VBV/CPB Limit",
+		NULL,
+	};
+	static const char * const mfc51_video_force_frame[] = {
+		"Disabled",
+		"I Frame",
+		"Not Coded",
+		NULL,
+	};
+	switch (id) {
+	case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE:
+		return mfc51_video_frame_skip;
+	case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE:
+		return mfc51_video_force_frame;
+	}
+	return NULL;
+}
+
+static int s5p_mfc_ctx_ready(struct s5p_mfc_ctx *ctx)
+{
+	mfc_debug(2, "src=%d, dst=%d, state=%d\n",
+		  ctx->src_queue_cnt, ctx->dst_queue_cnt, ctx->state);
+	/* context is ready to make header */
+	if (ctx->state == MFCINST_GOT_INST && ctx->dst_queue_cnt >= 1)
+		return 1;
+	/* context is ready to encode a frame */
+	if (ctx->state == MFCINST_RUNNING &&
+		ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1)
+		return 1;
+	/* context is ready to encode remain frames */
+	if (ctx->state == MFCINST_FINISHING &&
+		ctx->src_queue_cnt >= 1 && ctx->dst_queue_cnt >= 1)
+		return 1;
+	mfc_debug(2, "ctx is not ready\n");
+	return 0;
+}
+
+static void cleanup_ref_queue(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_buf *mb_entry;
+	unsigned long mb_y_addr, mb_c_addr;
+
+	/* move buffers in ref queue to src queue */
+	while (!list_empty(&ctx->ref_queue)) {
+		mb_entry = list_entry((&ctx->ref_queue)->next,
+						struct s5p_mfc_buf, list);
+		mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
+		mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+		list_del(&mb_entry->list);
+		ctx->ref_queue_cnt--;
+		list_add_tail(&mb_entry->list, &ctx->src_queue);
+		ctx->src_queue_cnt++;
+	}
+	mfc_debug(2, "enc src count: %d, enc ref count: %d\n",
+		  ctx->src_queue_cnt, ctx->ref_queue_cnt);
+	INIT_LIST_HEAD(&ctx->ref_queue);
+	ctx->ref_queue_cnt = 0;
+}
+
+static int enc_pre_seq_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *dst_mb;
+	unsigned long dst_addr;
+	unsigned int dst_size;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	return 0;
+}
+
+static int enc_post_seq_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_buf *dst_mb;
+	unsigned long flags;
+
+	if (p->seq_hdr_mode == V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE) {
+		spin_lock_irqsave(&dev->irqlock, flags);
+		dst_mb = list_entry(ctx->dst_queue.next,
+				struct s5p_mfc_buf, list);
+		list_del(&dst_mb->list);
+		ctx->dst_queue_cnt--;
+		vb2_set_plane_payload(dst_mb->b, 0,
+						s5p_mfc_get_enc_strm_size());
+		vb2_buffer_done(dst_mb->b, VB2_BUF_STATE_DONE);
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	}
+	ctx->state = MFCINST_RUNNING;
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+	return 0;
+}
+
+static int enc_pre_frame_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *dst_mb;
+	struct s5p_mfc_buf *src_mb;
+	unsigned long flags;
+	unsigned long src_y_addr, src_c_addr, dst_addr;
+	unsigned int dst_size;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0);
+	src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1);
+	s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+
+	return 0;
+}
+
+static int enc_post_frame_start(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *mb_entry;
+	unsigned long enc_y_addr, enc_c_addr;
+	unsigned long mb_y_addr, mb_c_addr;
+	int slice_type;
+	unsigned int strm_size;
+	unsigned long flags;
+
+	slice_type = s5p_mfc_get_enc_slice_type();
+	strm_size = s5p_mfc_get_enc_strm_size();
+	mfc_debug(2, "Encoded slice type: %d", slice_type);
+	mfc_debug(2, "Encoded stream size: %d", strm_size);
+	mfc_debug(2, "Display order: %d",
+		  mfc_read(dev, S5P_FIMV_ENC_SI_PIC_CNT));
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (slice_type >= 0) {
+		s5p_mfc_get_enc_frame_buffer(ctx, &enc_y_addr, &enc_c_addr);
+		list_for_each_entry(mb_entry, &ctx->src_queue, list) {
+			mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
+			mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+			if ((enc_y_addr == mb_y_addr) &&
+						(enc_c_addr == mb_c_addr)) {
+				list_del(&mb_entry->list);
+				ctx->src_queue_cnt--;
+				vb2_buffer_done(mb_entry->b,
+							VB2_BUF_STATE_DONE);
+				break;
+			}
+		}
+		list_for_each_entry(mb_entry, &ctx->ref_queue, list) {
+			mb_y_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 0);
+			mb_c_addr = vb2_dma_contig_plane_paddr(mb_entry->b, 1);
+			if ((enc_y_addr == mb_y_addr) &&
+						(enc_c_addr == mb_c_addr)) {
+				list_del(&mb_entry->list);
+				ctx->ref_queue_cnt--;
+				vb2_buffer_done(mb_entry->b,
+							VB2_BUF_STATE_DONE);
+				break;
+			}
+		}
+	}
+	if ((ctx->src_queue_cnt > 0) && (ctx->state == MFCINST_RUNNING)) {
+		mb_entry = list_entry(ctx->src_queue.next, struct s5p_mfc_buf,
+									list);
+		if (mb_entry->used) {
+			list_del(&mb_entry->list);
+			ctx->src_queue_cnt--;
+			list_add_tail(&mb_entry->list, &ctx->ref_queue);
+			ctx->ref_queue_cnt++;
+		}
+		mfc_debug(2, "enc src count: %d, enc ref count: %d\n",
+			  ctx->src_queue_cnt, ctx->ref_queue_cnt);
+	}
+	if (strm_size > 0) {
+		/* at least one more dest. buffers exist always  */
+		mb_entry = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf,
+									list);
+		list_del(&mb_entry->list);
+		ctx->dst_queue_cnt--;
+		switch (slice_type) {
+		case S5P_FIMV_ENC_SI_SLICE_TYPE_I:
+			mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
+			break;
+		case S5P_FIMV_ENC_SI_SLICE_TYPE_P:
+			mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME;
+			break;
+		case S5P_FIMV_ENC_SI_SLICE_TYPE_B:
+			mb_entry->b->v4l2_buf.flags |= V4L2_BUF_FLAG_BFRAME;
+			break;
+		}
+		vb2_set_plane_payload(mb_entry->b, 0, strm_size);
+		vb2_buffer_done(mb_entry->b, VB2_BUF_STATE_DONE);
+	}
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	if ((ctx->src_queue_cnt == 0) || (ctx->dst_queue_cnt == 0)) {
+		spin_lock(&dev->condlock);
+		clear_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock(&dev->condlock);
+	}
+	return 0;
+}
+
+static struct s5p_mfc_codec_ops encoder_codec_ops = {
+	.pre_seq_start		= enc_pre_seq_start,
+	.post_seq_start		= enc_post_seq_start,
+	.pre_frame_start	= enc_pre_frame_start,
+	.post_frame_start	= enc_post_frame_start,
+};
+
+/* Query capabilities of the device */
+static int vidioc_querycap(struct file *file, void *priv,
+			   struct v4l2_capability *cap)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+
+	strncpy(cap->driver, dev->plat_dev->name, sizeof(cap->driver) - 1);
+	strncpy(cap->card, dev->plat_dev->name, sizeof(cap->card) - 1);
+	cap->bus_info[0] = 0;
+	cap->version = KERNEL_VERSION(1, 0, 0);
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
+			  | V4L2_CAP_VIDEO_OUTPUT
+			  | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+static int vidioc_enum_fmt(struct v4l2_fmtdesc *f, bool mplane, bool out)
+{
+	struct s5p_mfc_fmt *fmt;
+	int i, j = 0;
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (mplane && formats[i].num_planes == 1)
+			continue;
+		else if (!mplane && formats[i].num_planes > 1)
+			continue;
+		if (out && formats[i].type != MFC_FMT_RAW)
+			continue;
+		else if (!out && formats[i].type != MFC_FMT_ENC)
+			continue;
+		if (j == f->index) {
+			fmt = &formats[i];
+			strlcpy(f->description, fmt->name,
+				sizeof(f->description));
+			f->pixelformat = fmt->fourcc;
+			return 0;
+		}
+		++j;
+	}
+	return -EINVAL;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *pirv,
+				   struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, false);
+}
+
+static int vidioc_enum_fmt_vid_cap_mplane(struct file *file, void *pirv,
+					  struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, false);
+}
+
+static int vidioc_enum_fmt_vid_out(struct file *file, void *prov,
+				   struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, false, true);
+}
+
+static int vidioc_enum_fmt_vid_out_mplane(struct file *file, void *prov,
+					  struct v4l2_fmtdesc *f)
+{
+	return vidioc_enum_fmt(f, true, true);
+}
+
+static int vidioc_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
+
+	mfc_debug(2, "f->type = %d ctx->state = %d\n", f->type, ctx->state);
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		/* This is run on output (encoder dest) */
+		pix_fmt_mp->width = 0;
+		pix_fmt_mp->height = 0;
+		pix_fmt_mp->field = V4L2_FIELD_NONE;
+		pix_fmt_mp->pixelformat = ctx->dst_fmt->fourcc;
+		pix_fmt_mp->num_planes = ctx->dst_fmt->num_planes;
+
+		pix_fmt_mp->plane_fmt[0].bytesperline = ctx->enc_dst_buf_size;
+		pix_fmt_mp->plane_fmt[0].sizeimage = ctx->enc_dst_buf_size;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		/* This is run on capture (encoder src) */
+		pix_fmt_mp->width = ctx->img_width;
+		pix_fmt_mp->height = ctx->img_height;
+
+		pix_fmt_mp->field = V4L2_FIELD_NONE;
+		pix_fmt_mp->pixelformat = ctx->src_fmt->fourcc;
+		pix_fmt_mp->num_planes = ctx->src_fmt->num_planes;
+
+		pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+		pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+		pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+		pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_fmt *fmt;
+	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
+
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		fmt = find_format(f, MFC_FMT_ENC);
+		if (!fmt) {
+			mfc_err("failed to try output format\n");
+			return -EINVAL;
+		}
+
+		if (pix_fmt_mp->plane_fmt[0].sizeimage == 0) {
+			mfc_err("must be set encoding output size\n");
+			return -EINVAL;
+		}
+
+		pix_fmt_mp->plane_fmt[0].bytesperline =
+			pix_fmt_mp->plane_fmt[0].sizeimage;
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		fmt = find_format(f, MFC_FMT_RAW);
+		if (!fmt) {
+			mfc_err("failed to try output format\n");
+			return -EINVAL;
+		}
+
+		if (fmt->num_planes != pix_fmt_mp->num_planes) {
+			mfc_err("failed to try output format\n");
+			return -EINVAL;
+		}
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+	struct s5p_mfc_dev *dev = video_drvdata(file);
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	struct s5p_mfc_fmt *fmt;
+	struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
+	unsigned long flags;
+	int ret = 0;
+
+	ret = vidioc_try_fmt(file, priv, f);
+	if (ret)
+		return ret;
+	if (ctx->vq_src.streaming || ctx->vq_dst.streaming) {
+		v4l2_err(&dev->v4l2_dev, "%s queue busy\n", __func__);
+		ret = -EBUSY;
+		goto out;
+	}
+	if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		fmt = find_format(f, MFC_FMT_ENC);
+		if (!fmt) {
+			mfc_err("failed to set capture format\n");
+			return -EINVAL;
+		}
+		ctx->state = MFCINST_INIT;
+		ctx->dst_fmt = fmt;
+		ctx->codec_mode = ctx->dst_fmt->codec_mode;
+		ctx->enc_dst_buf_size =	pix_fmt_mp->plane_fmt[0].sizeimage;
+		pix_fmt_mp->plane_fmt[0].bytesperline = 0;
+		ctx->dst_bufs_cnt = 0;
+		ctx->capture_state = QUEUE_FREE;
+		s5p_mfc_alloc_instance_buffer(ctx);
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+		s5p_mfc_clean_ctx_int_flags(ctx);
+		s5p_mfc_try_run(dev);
+		if (s5p_mfc_wait_for_done_ctx(ctx, \
+				S5P_FIMV_R2H_CMD_OPEN_INSTANCE_RET, 1)) {
+				/* Error or timeout */
+			mfc_err("Error getting instance from hardware\n");
+			s5p_mfc_release_instance_buffer(ctx);
+			ret = -EIO;
+			goto out;
+		}
+		mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
+	} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		fmt = find_format(f, MFC_FMT_RAW);
+		if (!fmt) {
+			mfc_err("failed to set output format\n");
+			return -EINVAL;
+		}
+		if (fmt->num_planes != pix_fmt_mp->num_planes) {
+			mfc_err("failed to set output format\n");
+			ret = -EINVAL;
+			goto out;
+		}
+		ctx->src_fmt = fmt;
+		ctx->img_width = pix_fmt_mp->width;
+		ctx->img_height = pix_fmt_mp->height;
+		mfc_debug(2, "codec number: %d\n", ctx->src_fmt->codec_mode);
+		mfc_debug(2, "fmt - w: %d, h: %d, ctx - w: %d, h: %d\n",
+			pix_fmt_mp->width, pix_fmt_mp->height,
+			ctx->img_width, ctx->img_height);
+		if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M) {
+			ctx->buf_width = ALIGN(ctx->img_width,
+							S5P_FIMV_NV12M_HALIGN);
+			ctx->luma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12M_HALIGN) * ALIGN(ctx->img_height,
+				S5P_FIMV_NV12M_LVALIGN);
+			ctx->chroma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12M_HALIGN) * ALIGN((ctx->img_height
+				>> 1), S5P_FIMV_NV12M_CVALIGN);
+
+			ctx->luma_size = ALIGN(ctx->luma_size,
+							S5P_FIMV_NV12M_SALIGN);
+			ctx->chroma_size = ALIGN(ctx->chroma_size,
+							S5P_FIMV_NV12M_SALIGN);
+
+			pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+			pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+			pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+			pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+
+		} else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT) {
+			ctx->buf_width = ALIGN(ctx->img_width,
+							S5P_FIMV_NV12MT_HALIGN);
+			ctx->luma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12MT_HALIGN)	* ALIGN(ctx->img_height,
+				S5P_FIMV_NV12MT_VALIGN);
+			ctx->chroma_size = ALIGN(ctx->img_width,
+				S5P_FIMV_NV12MT_HALIGN) * ALIGN((ctx->img_height
+				>> 1), S5P_FIMV_NV12MT_VALIGN);
+			ctx->luma_size = ALIGN(ctx->luma_size,
+							S5P_FIMV_NV12MT_SALIGN);
+			ctx->chroma_size = ALIGN(ctx->chroma_size,
+							S5P_FIMV_NV12MT_SALIGN);
+
+			pix_fmt_mp->plane_fmt[0].sizeimage = ctx->luma_size;
+			pix_fmt_mp->plane_fmt[0].bytesperline = ctx->buf_width;
+			pix_fmt_mp->plane_fmt[1].sizeimage = ctx->chroma_size;
+			pix_fmt_mp->plane_fmt[1].bytesperline = ctx->buf_width;
+		}
+		ctx->src_bufs_cnt = 0;
+		ctx->output_state = QUEUE_FREE;
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+out:
+	mfc_debug_leave();
+	return ret;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+					  struct v4l2_requestbuffers *reqbufs)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+
+	/* if memory is not mmp or userptr return error */
+	if ((reqbufs->memory != V4L2_MEMORY_MMAP) &&
+		(reqbufs->memory != V4L2_MEMORY_USERPTR))
+		return -EINVAL;
+	if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->capture_state != QUEUE_FREE) {
+			mfc_err("invalid capture state: %d\n",
+							ctx->capture_state);
+			return -EINVAL;
+		}
+		ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+		if (ret != 0) {
+			mfc_err("error in vb2_reqbufs() for E(D)\n");
+			return ret;
+		}
+		ctx->capture_state = QUEUE_BUFS_REQUESTED;
+		ret = s5p_mfc_alloc_codec_buffers(ctx);
+		if (ret) {
+			mfc_err("Failed to allocate encoding buffers\n");
+			reqbufs->count = 0;
+			ret = vb2_reqbufs(&ctx->vq_dst, reqbufs);
+			return -ENOMEM;
+		}
+	} else if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (ctx->output_state != QUEUE_FREE) {
+			mfc_err("invalid output state: %d\n",
+							ctx->output_state);
+			return -EINVAL;
+		}
+		ret = vb2_reqbufs(&ctx->vq_src, reqbufs);
+		if (ret != 0) {
+			mfc_err("error in vb2_reqbufs() for E(S)\n");
+			return ret;
+		}
+		ctx->output_state = QUEUE_BUFS_REQUESTED;
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return ret;
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+						   struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+	int ret = 0;
+
+	/* if memory is not mmp or userptr return error */
+	if ((buf->memory != V4L2_MEMORY_MMAP) &&
+		(buf->memory != V4L2_MEMORY_USERPTR))
+		return -EINVAL;
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->state != MFCINST_GOT_INST) {
+			mfc_err("invalid context state: %d\n", ctx->state);
+			return -EINVAL;
+		}
+		ret = vb2_querybuf(&ctx->vq_dst, buf);
+		if (ret != 0) {
+			mfc_err("error in vb2_querybuf() for E(D)\n");
+			return ret;
+		}
+		buf->m.planes[0].m.mem_offset += DST_QUEUE_OFF_BASE;
+	} else if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = vb2_querybuf(&ctx->vq_src, buf);
+		if (ret != 0) {
+			mfc_err("error in vb2_querybuf() for E(S)\n");
+			return ret;
+		}
+	} else {
+		mfc_err("invalid buf type\n");
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/* Queue a buffer */
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on QBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_qbuf(&ctx->vq_src, buf);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_qbuf(&ctx->vq_dst, buf);
+	return -EINVAL;
+}
+
+/* Dequeue a buffer */
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (ctx->state == MFCINST_ERROR) {
+		mfc_err("Call on DQBUF after unrecoverable error\n");
+		return -EIO;
+	}
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_dqbuf(&ctx->vq_src, buf, file->f_flags & O_NONBLOCK);
+	else if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_dqbuf(&ctx->vq_dst, buf, file->f_flags & O_NONBLOCK);
+	return -EINVAL;
+}
+
+/* Stream on */
+static int vidioc_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_streamon(&ctx->vq_src, type);
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_streamon(&ctx->vq_dst, type);
+	return -EINVAL;
+}
+
+/* Stream off, which equals to a pause */
+static int vidioc_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type type)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+		return vb2_streamoff(&ctx->vq_src, type);
+	else if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
+		return vb2_streamoff(&ctx->vq_dst, type);
+	return -EINVAL;
+}
+
+static inline int h264_level(enum v4l2_mpeg_video_h264_level lvl)
+{
+	static unsigned int t[V4L2_MPEG_VIDEO_H264_LEVEL_4_0 + 1] = {
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_0   */ 10,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1B    */ 9,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_1   */ 11,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_2   */ 12,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_1_3   */ 13,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_2_0   */ 20,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_2_1   */ 21,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_2_2   */ 22,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_3_0   */ 30,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_3_1   */ 31,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_3_2   */ 32,
+		/* V4L2_MPEG_VIDEO_H264_LEVEL_4_0   */ 40,
+	};
+	return t[lvl];
+}
+
+static inline int mpeg4_level(enum v4l2_mpeg_video_mpeg4_level lvl)
+{
+	static unsigned int t[V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 + 1] = {
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_0    */ 0,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B   */ 9,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_1    */ 1,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_2    */ 2,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_3    */ 3,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B   */ 7,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_4    */ 4,
+		/* V4L2_MPEG_VIDEO_MPEG4_LEVEL_5    */ 5,
+	};
+	return t[lvl];
+}
+
+static inline int vui_sar_idc(enum v4l2_mpeg_video_h264_vui_sar_idc sar)
+{
+	static unsigned int t[V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED + 1] = {
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED     */ 0,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1             */ 1,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11           */ 2,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11           */ 3,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11           */ 4,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33           */ 5,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11           */ 6,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11           */ 7,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11           */ 8,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33           */ 9,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11           */ 10,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11           */ 11,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33           */ 12,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99          */ 13,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3             */ 14,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2             */ 15,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1             */ 16,
+		/* V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED        */ 255,
+	};
+	return t[sar];
+}
+
+static int s5p_mfc_enc_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct s5p_mfc_ctx *ctx = ctrl_to_ctx(ctrl);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+		p->gop_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:
+		p->slice_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB:
+		p->slice_mb = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES:
+		p->slice_bit = ctrl->val * 8;
+		break;
+	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:
+		p->intra_refresh_mb = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_PADDING:
+		p->pad = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV:
+		p->pad_luma = (ctrl->val >> 16) & 0xff;
+		p->pad_cb = (ctrl->val >> 8) & 0xff;
+		p->pad_cr = (ctrl->val >> 0) & 0xff;
+		break;
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:
+		p->rc_frame = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_BITRATE:
+		p->rc_bitrate = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF:
+		p->rc_reaction_coeff = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE:
+		ctx->force_frame_type = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_VBV_SIZE:
+		p->vbv_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE:
+		p->codec.h264.cpb_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
+		p->seq_hdr_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE:
+		p->frame_skip_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT:
+		p->fixed_target_bit = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
+		p->num_b_frame = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+		switch (ctrl->val) {
+		case V4L2_MPEG_VIDEO_H264_PROFILE_MAIN:
+			p->codec.h264.profile =
+					S5P_FIMV_ENC_PROFILE_H264_MAIN;
+			break;
+		case V4L2_MPEG_VIDEO_H264_PROFILE_HIGH:
+			p->codec.h264.profile =
+					S5P_FIMV_ENC_PROFILE_H264_HIGH;
+			break;
+		case V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE:
+			p->codec.h264.profile =
+				S5P_FIMV_ENC_PROFILE_H264_BASELINE;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+		p->codec.h264.level_v4l2 = ctrl->val;
+		p->codec.h264.level = h264_level(ctrl->val);
+		if (p->codec.h264.level < 0) {
+			mfc_err("Level number is wrong\n");
+			ret = p->codec.h264.level;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
+		p->codec.mpeg4.level_v4l2 = ctrl->val;
+		p->codec.mpeg4.level = mpeg4_level(ctrl->val);
+		if (p->codec.mpeg4.level < 0) {
+			mfc_err("Level number is wrong\n");
+			ret = p->codec.mpeg4.level;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+		p->codec.h264.loop_filter_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA:
+		p->codec.h264.loop_filter_alpha = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA:
+		p->codec.h264.loop_filter_beta = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:
+		p->codec.h264.entropy_mode = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P:
+		p->codec.h264.num_ref_pic_4p = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
+		p->codec.h264._8x8_transform = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:
+		p->codec.h264.rc_mb = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP:
+		p->codec.h264.rc_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_MIN_QP:
+		p->codec.h264.rc_min_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_MAX_QP:
+		p->codec.h264.rc_max_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP:
+		p->codec.h264.rc_p_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP:
+		p->codec.h264.rc_b_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP:
+		p->codec.mpeg4.rc_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_MIN_QP:
+		p->codec.mpeg4.rc_min_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_MAX_QP:
+		p->codec.mpeg4.rc_max_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP:
+		p->codec.mpeg4.rc_p_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP:
+	case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP:
+		p->codec.mpeg4.rc_b_frame_qp = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK:
+		p->codec.h264.rc_mb_dark = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH:
+		p->codec.h264.rc_mb_smooth = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC:
+		p->codec.h264.rc_mb_static = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY:
+		p->codec.h264.rc_mb_activity = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:
+		p->codec.h264.vui_sar = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
+		p->codec.h264.vui_sar_idc = vui_sar_idc(ctrl->val);
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH:
+		p->codec.h264.vui_ext_sar_width = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT:
+		p->codec.h264.vui_ext_sar_height = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
+		p->codec.h264.open_gop = !ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD:
+		p->codec.h264.open_gop_size = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
+		switch (ctrl->val) {
+		case V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE:
+			p->codec.mpeg4.profile =
+				S5P_FIMV_ENC_PROFILE_MPEG4_SIMPLE;
+			break;
+		case V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE:
+			p->codec.mpeg4.profile =
+			S5P_FIMV_ENC_PROFILE_MPEG4_ADVANCED_SIMPLE;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:
+		p->codec.mpeg4.quarter_pixel = ctrl->val;
+		break;
+	default:
+		v4l2_err(&dev->v4l2_dev, "Invalid control, id=%d, val=%d\n",
+							ctrl->id, ctrl->val);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops s5p_mfc_enc_ctrl_ops = {
+	.s_ctrl = s5p_mfc_enc_s_ctrl,
+};
+
+int vidioc_s_parm(struct file *file, void *priv, struct v4l2_streamparm *a)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ctx->enc_params.rc_framerate_num =
+					a->parm.output.timeperframe.denominator;
+		ctx->enc_params.rc_framerate_denom =
+					a->parm.output.timeperframe.numerator;
+	} else {
+		mfc_err("Setting FPS is only possible for the output queue\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int vidioc_g_parm(struct file *file, void *priv, struct v4l2_streamparm *a)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
+
+	if (a->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		a->parm.output.timeperframe.denominator =
+					ctx->enc_params.rc_framerate_num;
+		a->parm.output.timeperframe.numerator =
+					ctx->enc_params.rc_framerate_denom;
+	} else {
+		mfc_err("Setting FPS is only possible for the output queue\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops s5p_mfc_enc_ioctl_ops = {
+	.vidioc_querycap = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap_mplane = vidioc_enum_fmt_vid_cap_mplane,
+	.vidioc_enum_fmt_vid_out = vidioc_enum_fmt_vid_out,
+	.vidioc_enum_fmt_vid_out_mplane = vidioc_enum_fmt_vid_out_mplane,
+	.vidioc_g_fmt_vid_cap_mplane = vidioc_g_fmt,
+	.vidioc_g_fmt_vid_out_mplane = vidioc_g_fmt,
+	.vidioc_try_fmt_vid_cap_mplane = vidioc_try_fmt,
+	.vidioc_try_fmt_vid_out_mplane = vidioc_try_fmt,
+	.vidioc_s_fmt_vid_cap_mplane = vidioc_s_fmt,
+	.vidioc_s_fmt_vid_out_mplane = vidioc_s_fmt,
+	.vidioc_reqbufs = vidioc_reqbufs,
+	.vidioc_querybuf = vidioc_querybuf,
+	.vidioc_qbuf = vidioc_qbuf,
+	.vidioc_dqbuf = vidioc_dqbuf,
+	.vidioc_streamon = vidioc_streamon,
+	.vidioc_streamoff = vidioc_streamoff,
+	.vidioc_s_parm = vidioc_s_parm,
+	.vidioc_g_parm = vidioc_g_parm,
+};
+
+static int check_vb_with_fmt(struct s5p_mfc_fmt *fmt, struct vb2_buffer *vb)
+{
+	int i;
+
+	if (!fmt)
+		return -EINVAL;
+	if (fmt->num_planes != vb->num_planes) {
+		mfc_err("invalid plane number for the format\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < fmt->num_planes; i++) {
+		if (!vb2_dma_contig_plane_paddr(vb, i)) {
+			mfc_err("failed to get plane cookie\n");
+			return -EINVAL;
+		}
+		mfc_debug(2, "index: %d, plane[%d] cookie: 0x%08zx",
+				vb->v4l2_buf.index, i,
+				vb2_dma_contig_plane_paddr(vb, i));
+	}
+	return 0;
+}
+
+static int s5p_mfc_queue_setup(struct vb2_queue *vq,
+		       unsigned int *buf_count, unsigned int *plane_count,
+		       unsigned long psize[], void *allocators[])
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+
+	if (ctx->state != MFCINST_GOT_INST) {
+		mfc_err("inavlid state: %d\n", ctx->state);
+		return -EINVAL;
+	}
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		if (ctx->dst_fmt)
+			*plane_count = ctx->dst_fmt->num_planes;
+		else
+			*plane_count = MFC_ENC_CAP_PLANE_COUNT;
+		if (*buf_count < 1)
+			*buf_count = 1;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+		psize[0] = ctx->enc_dst_buf_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		if (ctx->src_fmt)
+			*plane_count = ctx->src_fmt->num_planes;
+		else
+			*plane_count = MFC_ENC_OUT_PLANE_COUNT;
+
+		if (*buf_count < 1)
+			*buf_count = 1;
+		if (*buf_count > MFC_MAX_BUFFERS)
+			*buf_count = MFC_MAX_BUFFERS;
+		psize[0] = ctx->luma_size;
+		psize[1] = ctx->chroma_size;
+		allocators[0] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX];
+		allocators[1] = ctx->dev->alloc_ctx[MFC_BANK2_ALLOC_CTX];
+	} else {
+		mfc_err("inavlid queue type: %d\n", vq->type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void s5p_mfc_unlock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_unlock(&dev->mfc_mutex);
+}
+
+static void s5p_mfc_lock(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mutex_lock(&dev->mfc_mutex);
+}
+
+static int s5p_mfc_buf_init(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	unsigned int i;
+	int ret;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ret = check_vb_with_fmt(ctx->dst_fmt, vb);
+		if (ret < 0)
+			return ret;
+		i = vb->v4l2_buf.index;
+		ctx->dst_bufs[i].b = vb;
+		ctx->dst_bufs[i].cookie.stream =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->dst_bufs_cnt++;
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = check_vb_with_fmt(ctx->src_fmt, vb);
+		if (ret < 0)
+			return ret;
+		i = vb->v4l2_buf.index;
+		ctx->src_bufs[i].b = vb;
+		ctx->src_bufs[i].cookie.raw.luma =
+					vb2_dma_contig_plane_paddr(vb, 0);
+		ctx->src_bufs[i].cookie.raw.chroma =
+					vb2_dma_contig_plane_paddr(vb, 1);
+		ctx->src_bufs_cnt++;
+	} else {
+		mfc_err("inavlid queue type: %d\n", vq->type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	int ret;
+
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		ret = check_vb_with_fmt(ctx->dst_fmt, vb);
+		if (ret < 0)
+			return ret;
+		mfc_debug(2, "plane size: %ld, dst size: %d\n",
+			vb2_plane_size(vb, 0), ctx->enc_dst_buf_size);
+		if (vb2_plane_size(vb, 0) < ctx->enc_dst_buf_size) {
+			mfc_err("plane size is too small for capture\n");
+			return -EINVAL;
+		}
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		ret = check_vb_with_fmt(ctx->src_fmt, vb);
+		if (ret < 0)
+			return ret;
+		mfc_debug(2, "plane size: %ld, luma size: %d\n",
+			vb2_plane_size(vb, 0), ctx->luma_size);
+		mfc_debug(2, "plane size: %ld, chroma size: %d\n",
+			vb2_plane_size(vb, 1), ctx->chroma_size);
+		if (vb2_plane_size(vb, 0) < ctx->luma_size ||
+		    vb2_plane_size(vb, 1) < ctx->chroma_size) {
+			mfc_err("plane size is too small for output\n");
+			return -EINVAL;
+		}
+	} else {
+		mfc_err("inavlid queue type: %d\n", vq->type);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_start_streaming(struct vb2_queue *q)
+{
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+
+	v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
+	/* If context is ready then dev = work->data;schedule it to run */
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+	return 0;
+}
+
+static int s5p_mfc_stop_streaming(struct vb2_queue *q)
+{
+	unsigned long flags;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(q->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	if ((ctx->state == MFCINST_FINISHING ||
+		ctx->state == MFCINST_RUNNING) &&
+		dev->curr_ctx == ctx->num && dev->hw_lock) {
+		ctx->state = MFCINST_ABORT;
+		s5p_mfc_wait_for_done_ctx(ctx, S5P_FIMV_R2H_CMD_FRAME_DONE_RET,
+					  0);
+	}
+	ctx->state = MFCINST_FINISHED;
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		s5p_mfc_cleanup_queue(&ctx->dst_queue, &ctx->vq_dst);
+		INIT_LIST_HEAD(&ctx->dst_queue);
+		ctx->dst_queue_cnt = 0;
+	}
+	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		cleanup_ref_queue(ctx);
+		s5p_mfc_cleanup_queue(&ctx->src_queue, &ctx->vq_src);
+		INIT_LIST_HEAD(&ctx->src_queue);
+		ctx->src_queue_cnt = 0;
+	}
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	return 0;
+}
+
+static void s5p_mfc_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *mfc_buf;
+
+	if (ctx->state == MFCINST_ERROR) {
+		vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+		cleanup_ref_queue(ctx);
+		return;
+	}
+	if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
+		mfc_buf = &ctx->dst_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		/* Mark destination as available for use by MFC */
+		spin_lock_irqsave(&dev->irqlock, flags);
+		list_add_tail(&mfc_buf->list, &ctx->dst_queue);
+		ctx->dst_queue_cnt++;
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+		mfc_buf = &ctx->src_bufs[vb->v4l2_buf.index];
+		mfc_buf->used = 0;
+		spin_lock_irqsave(&dev->irqlock, flags);
+		if (vb->v4l2_planes[0].bytesused == 0) {
+			mfc_debug(1, "change state to FINISHING\n");
+			ctx->state = MFCINST_FINISHING;
+			vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
+			cleanup_ref_queue(ctx);
+		} else {
+			list_add_tail(&mfc_buf->list, &ctx->src_queue);
+			ctx->src_queue_cnt++;
+		}
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+	} else {
+		mfc_err("unsupported buffer type (%d)\n", vq->type);
+	}
+	if (s5p_mfc_ctx_ready(ctx)) {
+		spin_lock_irqsave(&dev->condlock, flags);
+		set_bit(ctx->num, &dev->ctx_work_bits);
+		spin_unlock_irqrestore(&dev->condlock, flags);
+	}
+	s5p_mfc_try_run(dev);
+}
+
+static struct vb2_ops s5p_mfc_enc_qops = {
+	.queue_setup		= s5p_mfc_queue_setup,
+	.wait_prepare		= s5p_mfc_unlock,
+	.wait_finish		= s5p_mfc_lock,
+	.buf_init		= s5p_mfc_buf_init,
+	.buf_prepare		= s5p_mfc_buf_prepare,
+	.start_streaming	= s5p_mfc_start_streaming,
+	.stop_streaming		= s5p_mfc_stop_streaming,
+	.buf_queue		= s5p_mfc_buf_queue,
+};
+
+struct s5p_mfc_codec_ops *get_enc_codec_ops(void)
+{
+	return &encoder_codec_ops;
+}
+
+struct vb2_ops *get_enc_queue_ops(void)
+{
+	return &s5p_mfc_enc_qops;
+}
+
+const struct v4l2_ioctl_ops *get_enc_v4l2_ioctl_ops(void)
+{
+	return &s5p_mfc_enc_ioctl_ops;
+}
+
+#define IS_MFC51_PRIV(x) ((V4L2_CTRL_ID2CLASS(x) == V4L2_CTRL_CLASS_MPEG) \
+						&& V4L2_CTRL_DRIVER_PRIV(x))
+
+int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx)
+{
+	struct v4l2_ctrl_config cfg;
+	int i;
+
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, NUM_CTRLS);
+	if (ctx->ctrl_handler.error) {
+		mfc_err("v4l2_ctrl_handler_init failed\n");
+		return ctx->ctrl_handler.error;
+	}
+	for (i = 0; i < NUM_CTRLS; i++) {
+		if (IS_MFC51_PRIV(controls[i].id)) {
+			cfg.ops = &s5p_mfc_enc_ctrl_ops;
+			cfg.id = controls[i].id;
+			cfg.min = controls[i].minimum;
+			cfg.max = controls[i].maximum;
+			cfg.def = controls[i].default_value;
+			cfg.name = controls[i].name;
+			cfg.type = controls[i].type;
+			cfg.flags = 0;
+
+			if (cfg.type == V4L2_CTRL_TYPE_MENU) {
+				cfg.step = 0;
+				cfg.menu_skip_mask = cfg.menu_skip_mask;
+				cfg.qmenu = mfc51_get_menu(cfg.id);
+			} else {
+				cfg.step = controls[i].step;
+				cfg.menu_skip_mask = 0;
+			}
+			ctx->ctrls[i] = v4l2_ctrl_new_custom(&ctx->ctrl_handler,
+					&cfg, NULL);
+		} else {
+			if (controls[i].type == V4L2_CTRL_TYPE_MENU) {
+				ctx->ctrls[i] = v4l2_ctrl_new_std_menu(
+					&ctx->ctrl_handler,
+					&s5p_mfc_enc_ctrl_ops, controls[i].id,
+					controls[i].maximum, 0,
+					controls[i].default_value);
+			} else {
+				ctx->ctrls[i] = v4l2_ctrl_new_std(
+					&ctx->ctrl_handler,
+					&s5p_mfc_enc_ctrl_ops, controls[i].id,
+					controls[i].minimum,
+					controls[i].maximum, controls[i].step,
+					controls[i].default_value);
+			}
+		}
+		if (ctx->ctrl_handler.error) {
+			mfc_err("Adding control (%d) failed\n", i);
+			return ctx->ctrl_handler.error;
+		}
+		if (controls[i].is_volatile && ctx->ctrls[i])
+			ctx->ctrls[i]->is_volatile = 1;
+	}
+	return 0;
+}
+
+void s5p_mfc_enc_ctrls_delete(struct s5p_mfc_ctx *ctx)
+{
+	int i;
+
+	v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+	for (i = 0; i < NUM_CTRLS; i++)
+		ctx->ctrls[i] = NULL;
+}
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.h b/drivers/media/video/s5p-mfc/s5p_mfc_enc.h
new file mode 100644
index 00000000000..405bdd3ee08
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.h
@@ -0,0 +1,23 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_enc.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_ENC_H_
+#define S5P_MFC_ENC_H_
+
+struct s5p_mfc_codec_ops *get_enc_codec_ops(void);
+struct vb2_ops *get_enc_queue_ops(void);
+const struct v4l2_ioctl_ops *get_enc_v4l2_ioctl_ops(void);
+struct s5p_mfc_fmt *get_enc_def_fmt(bool src);
+int s5p_mfc_enc_ctrls_setup(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_enc_ctrls_delete(struct s5p_mfc_ctx *ctx);
+
+#endif /* S5P_MFC_ENC_H_  */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.c b/drivers/media/video/s5p-mfc/s5p_mfc_intr.c
new file mode 100644
index 00000000000..8f2f8bf4da7
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_intr.c
@@ -0,0 +1,92 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_intr.c
+ *
+ * C file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * This file contains functions used to wait for command completion.
+ *
+ * Kamil Debski, Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include "regs-mfc.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_intr.h"
+
+int s5p_mfc_wait_for_done_dev(struct s5p_mfc_dev *dev, int command)
+{
+	int ret;
+
+	ret = wait_event_interruptible_timeout(dev->queue,
+		(dev->int_cond && (dev->int_type == command
+		|| dev->int_type == S5P_FIMV_R2H_CMD_ERR_RET)),
+		msecs_to_jiffies(MFC_INT_TIMEOUT));
+	if (ret == 0) {
+		mfc_err("Interrupt (dev->int_type:%d, command:%d) timed out\n",
+							dev->int_type, command);
+		return 1;
+	} else if (ret == -ERESTARTSYS) {
+		mfc_err("Interrupted by a signal\n");
+		return 1;
+	}
+	mfc_debug(1, "Finished waiting (dev->int_type:%d, command: %d)\n",
+							dev->int_type, command);
+	if (dev->int_type == S5P_FIMV_R2H_CMD_ERR_RET)
+		return 1;
+	return 0;
+}
+
+void s5p_mfc_clean_dev_int_flags(struct s5p_mfc_dev *dev)
+{
+	dev->int_cond = 0;
+	dev->int_type = 0;
+	dev->int_err = 0;
+}
+
+int s5p_mfc_wait_for_done_ctx(struct s5p_mfc_ctx *ctx,
+				    int command, int interrupt)
+{
+	int ret;
+
+	if (interrupt) {
+		ret = wait_event_interruptible_timeout(ctx->queue,
+				(ctx->int_cond && (ctx->int_type == command
+			|| ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)),
+					msecs_to_jiffies(MFC_INT_TIMEOUT));
+	} else {
+		ret = wait_event_timeout(ctx->queue,
+				(ctx->int_cond && (ctx->int_type == command
+			|| ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)),
+					msecs_to_jiffies(MFC_INT_TIMEOUT));
+	}
+	if (ret == 0) {
+		mfc_err("Interrupt (ctx->int_type:%d, command:%d) timed out\n",
+							ctx->int_type, command);
+		return 1;
+	} else if (ret == -ERESTARTSYS) {
+		mfc_err("Interrupted by a signal\n");
+		return 1;
+	}
+	mfc_debug(1, "Finished waiting (ctx->int_type:%d, command: %d)\n",
+							ctx->int_type, command);
+	if (ctx->int_type == S5P_FIMV_R2H_CMD_ERR_RET)
+		return 1;
+	return 0;
+}
+
+void s5p_mfc_clean_ctx_int_flags(struct s5p_mfc_ctx *ctx)
+{
+	ctx->int_cond = 0;
+	ctx->int_type = 0;
+	ctx->int_err = 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_intr.h b/drivers/media/video/s5p-mfc/s5p_mfc_intr.h
new file mode 100644
index 00000000000..122d7732f74
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_intr.h
@@ -0,0 +1,26 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_intr.h
+ *
+ * Header file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * It contains waiting functions declarations.
+ *
+ * Kamil Debski, Copyright (C) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_MFC_INTR_H_
+#define S5P_MFC_INTR_H_
+
+#include "s5p_mfc_common.h"
+
+int s5p_mfc_wait_for_done_ctx(struct s5p_mfc_ctx *ctx,
+			      int command, int interrupt);
+int s5p_mfc_wait_for_done_dev(struct s5p_mfc_dev *dev, int command);
+void s5p_mfc_clean_ctx_int_flags(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_clean_dev_int_flags(struct s5p_mfc_dev *dev);
+
+#endif /* S5P_MFC_INTR_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.c b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
new file mode 100644
index 00000000000..7b239168c19
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.c
@@ -0,0 +1,1397 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_opr.c
+ *
+ * Samsung MFC (Multi Function Codec - FIMV) driver
+ * This file contains hw related functions.
+ *
+ * Kamil Debski, Copyright (c) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "regs-mfc.h"
+#include "s5p_mfc_cmd.h"
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_ctrl.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_intr.h"
+#include "s5p_mfc_opr.h"
+#include "s5p_mfc_pm.h"
+#include "s5p_mfc_shm.h"
+#include <asm/cacheflush.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#define OFFSETA(x)		(((x) - dev->bank1) >> MFC_OFFSET_SHIFT)
+#define OFFSETB(x)		(((x) - dev->bank2) >> MFC_OFFSET_SHIFT)
+
+/* Allocate temporary buffers for decoding */
+int s5p_mfc_alloc_dec_temp_buffers(struct s5p_mfc_ctx *ctx)
+{
+	void *desc_virt;
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	ctx->desc_buf = vb2_dma_contig_memops.alloc(
+			dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], DESC_BUF_SIZE);
+	if (IS_ERR_VALUE((int)ctx->desc_buf)) {
+		ctx->desc_buf = 0;
+		mfc_err("Allocating DESC buffer failed\n");
+		return -ENOMEM;
+	}
+	ctx->desc_phys = s5p_mfc_mem_cookie(
+			dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->desc_buf);
+	BUG_ON(ctx->desc_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	desc_virt = vb2_dma_contig_memops.vaddr(ctx->desc_buf);
+	if (desc_virt == NULL) {
+		vb2_dma_contig_memops.put(ctx->desc_buf);
+		ctx->desc_phys = 0;
+		ctx->desc_buf = 0;
+		mfc_err("Remapping DESC buffer failed\n");
+		return -ENOMEM;
+	}
+	memset(desc_virt, 0, DESC_BUF_SIZE);
+	wmb();
+	return 0;
+}
+
+/* Release temporary buffers for decoding */
+void s5p_mfc_release_dec_desc_buffer(struct s5p_mfc_ctx *ctx)
+{
+	if (ctx->desc_phys) {
+		vb2_dma_contig_memops.put(ctx->desc_buf);
+		ctx->desc_phys = 0;
+		ctx->desc_buf = 0;
+	}
+}
+
+/* Allocate codec buffers */
+int s5p_mfc_alloc_codec_buffers(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int enc_ref_y_size = 0;
+	unsigned int enc_ref_c_size = 0;
+	unsigned int guard_width, guard_height;
+
+	if (ctx->type == MFCINST_DECODER) {
+		mfc_debug(2, "Luma size:%d Chroma size:%d MV size:%d\n",
+			  ctx->luma_size, ctx->chroma_size, ctx->mv_size);
+		mfc_debug(2, "Totals bufs: %d\n", ctx->total_dpb_count);
+	} else if (ctx->type == MFCINST_ENCODER) {
+		enc_ref_y_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN)
+			* ALIGN(ctx->img_height, S5P_FIMV_NV12MT_VALIGN);
+		enc_ref_y_size = ALIGN(enc_ref_y_size, S5P_FIMV_NV12MT_SALIGN);
+
+		if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) {
+			enc_ref_c_size = ALIGN(ctx->img_width,
+						S5P_FIMV_NV12MT_HALIGN)
+						* ALIGN(ctx->img_height >> 1,
+						S5P_FIMV_NV12MT_VALIGN);
+			enc_ref_c_size = ALIGN(enc_ref_c_size,
+							S5P_FIMV_NV12MT_SALIGN);
+		} else {
+			guard_width = ALIGN(ctx->img_width + 16,
+							S5P_FIMV_NV12MT_HALIGN);
+			guard_height = ALIGN((ctx->img_height >> 1) + 4,
+							S5P_FIMV_NV12MT_VALIGN);
+			enc_ref_c_size = ALIGN(guard_width * guard_height,
+					       S5P_FIMV_NV12MT_SALIGN);
+		}
+		mfc_debug(2, "recon luma size: %d chroma size: %d\n",
+			  enc_ref_y_size, enc_ref_c_size);
+	} else {
+		return -EINVAL;
+	}
+	/* Codecs have different memory requirements */
+	switch (ctx->codec_mode) {
+	case S5P_FIMV_CODEC_H264_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_NB_IP_SIZE +
+					S5P_FIMV_DEC_VERT_NB_MV_SIZE,
+					S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = ctx->total_dpb_count * ctx->mv_size;
+		break;
+	case S5P_FIMV_CODEC_MPEG4_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_NB_DCAC_SIZE +
+				     S5P_FIMV_DEC_UPNB_MV_SIZE +
+				     S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE +
+				     S5P_FIMV_DEC_STX_PARSER_SIZE +
+				     S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE,
+				     S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_VC1RCV_DEC:
+	case S5P_FIMV_CODEC_VC1_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE +
+			     S5P_FIMV_DEC_UPNB_MV_SIZE +
+			     S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE +
+			     S5P_FIMV_DEC_NB_DCAC_SIZE +
+			     3 * S5P_FIMV_DEC_VC1_BITPLANE_SIZE,
+			     S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_MPEG2_DEC:
+		ctx->bank1_size = 0;
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_H263_DEC:
+		ctx->bank1_size =
+		    ALIGN(S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE +
+			     S5P_FIMV_DEC_UPNB_MV_SIZE +
+			     S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE +
+			     S5P_FIMV_DEC_NB_DCAC_SIZE,
+			     S5P_FIMV_DEC_BUF_ALIGN);
+		ctx->bank2_size = 0;
+		break;
+	case S5P_FIMV_CODEC_H264_ENC:
+		ctx->bank1_size = (enc_ref_y_size * 2) +
+				   S5P_FIMV_ENC_UPMV_SIZE +
+				   S5P_FIMV_ENC_COLFLG_SIZE +
+				   S5P_FIMV_ENC_INTRAMD_SIZE +
+				   S5P_FIMV_ENC_NBORINFO_SIZE;
+		ctx->bank2_size = (enc_ref_y_size * 2) +
+				   (enc_ref_c_size * 4) +
+				   S5P_FIMV_ENC_INTRAPRED_SIZE;
+		break;
+	case S5P_FIMV_CODEC_MPEG4_ENC:
+		ctx->bank1_size = (enc_ref_y_size * 2) +
+				   S5P_FIMV_ENC_UPMV_SIZE +
+				   S5P_FIMV_ENC_COLFLG_SIZE +
+				   S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		ctx->bank2_size = (enc_ref_y_size * 2) +
+				   (enc_ref_c_size * 4);
+		break;
+	case S5P_FIMV_CODEC_H263_ENC:
+		ctx->bank1_size = (enc_ref_y_size * 2) +
+				   S5P_FIMV_ENC_UPMV_SIZE +
+				   S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		ctx->bank2_size = (enc_ref_y_size * 2) +
+				   (enc_ref_c_size * 4);
+		break;
+	default:
+		break;
+	}
+	/* Allocate only if memory from bank 1 is necessary */
+	if (ctx->bank1_size > 0) {
+		ctx->bank1_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->bank1_size);
+		if (IS_ERR(ctx->bank1_buf)) {
+			ctx->bank1_buf = 0;
+			printk(KERN_ERR
+			       "Buf alloc for decoding failed (port A)\n");
+			return -ENOMEM;
+		}
+		ctx->bank1_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->bank1_buf);
+		BUG_ON(ctx->bank1_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	}
+	/* Allocate only if memory from bank 2 is necessary */
+	if (ctx->bank2_size > 0) {
+		ctx->bank2_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], ctx->bank2_size);
+		if (IS_ERR(ctx->bank2_buf)) {
+			ctx->bank2_buf = 0;
+			mfc_err("Buf alloc for decoding failed (port B)\n");
+			return -ENOMEM;
+		}
+		ctx->bank2_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], ctx->bank2_buf);
+		BUG_ON(ctx->bank2_phys & ((1 << MFC_BANK2_ALIGN_ORDER) - 1));
+	}
+	return 0;
+}
+
+/* Release buffers allocated for codec */
+void s5p_mfc_release_codec_buffers(struct s5p_mfc_ctx *ctx)
+{
+	if (ctx->bank1_buf) {
+		vb2_dma_contig_memops.put(ctx->bank1_buf);
+		ctx->bank1_buf = 0;
+		ctx->bank1_phys = 0;
+		ctx->bank1_size = 0;
+	}
+	if (ctx->bank2_buf) {
+		vb2_dma_contig_memops.put(ctx->bank2_buf);
+		ctx->bank2_buf = 0;
+		ctx->bank2_phys = 0;
+		ctx->bank2_size = 0;
+	}
+}
+
+/* Allocate memory for instance data buffer */
+int s5p_mfc_alloc_instance_buffer(struct s5p_mfc_ctx *ctx)
+{
+	void *context_virt;
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC ||
+		ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC)
+		ctx->ctx_size = MFC_H264_CTX_BUF_SIZE;
+	else
+		ctx->ctx_size = MFC_CTX_BUF_SIZE;
+	ctx->ctx_buf = vb2_dma_contig_memops.alloc(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->ctx_size);
+	if (IS_ERR(ctx->ctx_buf)) {
+		mfc_err("Allocating context buffer failed\n");
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+		return -ENOMEM;
+	}
+	ctx->ctx_phys = s5p_mfc_mem_cookie(
+		dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], ctx->ctx_buf);
+	BUG_ON(ctx->ctx_phys & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	ctx->ctx_ofs = OFFSETA(ctx->ctx_phys);
+	context_virt = vb2_dma_contig_memops.vaddr(ctx->ctx_buf);
+	if (context_virt == NULL) {
+		mfc_err("Remapping instance buffer failed\n");
+		vb2_dma_contig_memops.put(ctx->ctx_buf);
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+		return -ENOMEM;
+	}
+	/* Zero content of the allocated memory */
+	memset(context_virt, 0, ctx->ctx_size);
+	wmb();
+	if (s5p_mfc_init_shm(ctx) < 0) {
+		vb2_dma_contig_memops.put(ctx->ctx_buf);
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/* Release instance buffer */
+void s5p_mfc_release_instance_buffer(struct s5p_mfc_ctx *ctx)
+{
+	if (ctx->ctx_buf) {
+		vb2_dma_contig_memops.put(ctx->ctx_buf);
+		ctx->ctx_phys = 0;
+		ctx->ctx_buf = 0;
+	}
+	if (ctx->shm_alloc) {
+		vb2_dma_contig_memops.put(ctx->shm_alloc);
+		ctx->shm_alloc = 0;
+		ctx->shm = 0;
+	}
+}
+
+/* Set registers for decoding temporary buffers */
+void s5p_mfc_set_dec_desc_buffer(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETA(ctx->desc_phys), S5P_FIMV_SI_CH0_DESC_ADR);
+	mfc_write(dev, DESC_BUF_SIZE, S5P_FIMV_SI_CH0_DESC_SIZE);
+}
+
+/* Set registers for shared buffer */
+void s5p_mfc_set_shared_buffer(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	mfc_write(dev, ctx->shm_ofs, S5P_FIMV_SI_CH0_HOST_WR_ADR);
+}
+
+/* Set registers for decoding stream buffer */
+int s5p_mfc_set_dec_stream_buffer(struct s5p_mfc_ctx *ctx, int buf_addr,
+		  unsigned int start_num_byte, unsigned int buf_size)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETA(buf_addr), S5P_FIMV_SI_CH0_SB_ST_ADR);
+	mfc_write(dev, ctx->dec_src_buf_size, S5P_FIMV_SI_CH0_CPB_SIZE);
+	mfc_write(dev, buf_size, S5P_FIMV_SI_CH0_SB_FRM_SIZE);
+	s5p_mfc_write_shm(ctx, start_num_byte, START_BYTE_NUM);
+	return 0;
+}
+
+/* Set decoding frame buffer */
+int s5p_mfc_set_dec_frame_buffer(struct s5p_mfc_ctx *ctx)
+{
+	unsigned int frame_size, i;
+	unsigned int frame_size_ch, frame_size_mv;
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int dpb;
+	size_t buf_addr1, buf_addr2;
+	int buf_size1, buf_size2;
+
+	buf_addr1 = ctx->bank1_phys;
+	buf_size1 = ctx->bank1_size;
+	buf_addr2 = ctx->bank2_phys;
+	buf_size2 = ctx->bank2_size;
+	dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) &
+						~S5P_FIMV_DPB_COUNT_MASK;
+	mfc_write(dev, ctx->total_dpb_count | dpb,
+						S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
+	s5p_mfc_set_shared_buffer(ctx);
+	switch (ctx->codec_mode) {
+	case S5P_FIMV_CODEC_H264_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1),
+						S5P_FIMV_H264_VERT_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VERT_NB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VERT_NB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H264_NB_IP_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_IP_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_IP_SIZE;
+		break;
+	case S5P_FIMV_CODEC_MPEG4_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_NB_DCAC_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_UP_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_SA_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_SP_ADR);
+		buf_addr1 += S5P_FIMV_DEC_STX_PARSER_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_STX_PARSER_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_OT_LINE_ADR);
+		buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		break;
+	case S5P_FIMV_CODEC_H263_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_OT_LINE_ADR);
+		buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_UP_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_SA_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_NB_DCAC_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE;
+		break;
+	case S5P_FIMV_CODEC_VC1_DEC:
+	case S5P_FIMV_CODEC_VC1RCV_DEC:
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_NB_DCAC_ADR);
+		buf_addr1 += S5P_FIMV_DEC_NB_DCAC_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_NB_DCAC_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_OT_LINE_ADR);
+		buf_addr1 += S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_OVERLAP_TRANSFORM_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_UP_NB_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_UPNB_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_UPNB_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_SA_MV_ADR);
+		buf_addr1 += S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_SUB_ANCHOR_MV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE3_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE2_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_VC1_BITPLANE1_ADR);
+		buf_addr1 += S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		buf_size1 -= S5P_FIMV_DEC_VC1_BITPLANE_SIZE;
+		break;
+	case S5P_FIMV_CODEC_MPEG2_DEC:
+		break;
+	default:
+		mfc_err("Unknown codec for decoding (%x)\n",
+			ctx->codec_mode);
+		return -EINVAL;
+		break;
+	}
+	frame_size = ctx->luma_size;
+	frame_size_ch = ctx->chroma_size;
+	frame_size_mv = ctx->mv_size;
+	mfc_debug(2, "Frm size: %d ch: %d mv: %d\n", frame_size, frame_size_ch,
+								frame_size_mv);
+	for (i = 0; i < ctx->total_dpb_count; i++) {
+		/* Bank2 */
+		mfc_debug(2, "Luma %d: %x\n", i,
+					ctx->dst_bufs[i].cookie.raw.luma);
+		mfc_write(dev, OFFSETB(ctx->dst_bufs[i].cookie.raw.luma),
+						S5P_FIMV_DEC_LUMA_ADR + i * 4);
+		mfc_debug(2, "\tChroma %d: %x\n", i,
+					ctx->dst_bufs[i].cookie.raw.chroma);
+		mfc_write(dev, OFFSETA(ctx->dst_bufs[i].cookie.raw.chroma),
+					       S5P_FIMV_DEC_CHROMA_ADR + i * 4);
+		if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC) {
+			mfc_debug(2, "\tBuf2: %x, size: %d\n",
+							buf_addr2, buf_size2);
+			mfc_write(dev, OFFSETB(buf_addr2),
+						S5P_FIMV_H264_MV_ADR + i * 4);
+			buf_addr2 += frame_size_mv;
+			buf_size2 -= frame_size_mv;
+		}
+	}
+	mfc_debug(2, "Buf1: %u, buf_size1: %d\n", buf_addr1, buf_size1);
+	mfc_debug(2, "Buf 1/2 size after: %d/%d (frames %d)\n",
+			buf_size1,  buf_size2, ctx->total_dpb_count);
+	if (buf_size1 < 0 || buf_size2 < 0) {
+		mfc_debug(2, "Not enough memory has been allocated\n");
+		return -ENOMEM;
+	}
+	s5p_mfc_write_shm(ctx, frame_size, ALLOC_LUMA_DPB_SIZE);
+	s5p_mfc_write_shm(ctx, frame_size_ch, ALLOC_CHROMA_DPB_SIZE);
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_DEC)
+		s5p_mfc_write_shm(ctx, frame_size_mv, ALLOC_MV_SIZE);
+	mfc_write(dev, ((S5P_FIMV_CH_INIT_BUFS & S5P_FIMV_CH_MASK)
+					<< S5P_FIMV_CH_SHIFT) | (ctx->inst_no),
+						S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+/* Set registers for encoding stream buffer */
+int s5p_mfc_set_enc_stream_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long addr, unsigned int size)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETA(addr), S5P_FIMV_ENC_SI_CH0_SB_ADR);
+	mfc_write(dev, size, S5P_FIMV_ENC_SI_CH0_SB_SIZE);
+	return 0;
+}
+
+void s5p_mfc_set_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long y_addr, unsigned long c_addr)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, OFFSETB(y_addr), S5P_FIMV_ENC_SI_CH0_CUR_Y_ADR);
+	mfc_write(dev, OFFSETB(c_addr), S5P_FIMV_ENC_SI_CH0_CUR_C_ADR);
+}
+
+void s5p_mfc_get_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long *y_addr, unsigned long *c_addr)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	*y_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR)
+							<< MFC_OFFSET_SHIFT);
+	*c_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR)
+							<< MFC_OFFSET_SHIFT);
+}
+
+/* Set encoding ref & codec buffer */
+int s5p_mfc_set_enc_ref_buffer(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	size_t buf_addr1, buf_addr2;
+	size_t buf_size1, buf_size2;
+	unsigned int enc_ref_y_size, enc_ref_c_size;
+	unsigned int guard_width, guard_height;
+	int i;
+
+	buf_addr1 = ctx->bank1_phys;
+	buf_size1 = ctx->bank1_size;
+	buf_addr2 = ctx->bank2_phys;
+	buf_size2 = ctx->bank2_size;
+	enc_ref_y_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN)
+		* ALIGN(ctx->img_height, S5P_FIMV_NV12MT_VALIGN);
+	enc_ref_y_size = ALIGN(enc_ref_y_size, S5P_FIMV_NV12MT_SALIGN);
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC) {
+		enc_ref_c_size = ALIGN(ctx->img_width, S5P_FIMV_NV12MT_HALIGN)
+			* ALIGN((ctx->img_height >> 1), S5P_FIMV_NV12MT_VALIGN);
+		enc_ref_c_size = ALIGN(enc_ref_c_size, S5P_FIMV_NV12MT_SALIGN);
+	} else {
+		guard_width = ALIGN(ctx->img_width + 16,
+						S5P_FIMV_NV12MT_HALIGN);
+		guard_height = ALIGN((ctx->img_height >> 1) + 4,
+						S5P_FIMV_NV12MT_VALIGN);
+		enc_ref_c_size = ALIGN(guard_width * guard_height,
+				       S5P_FIMV_NV12MT_SALIGN);
+	}
+	mfc_debug(2, "buf_size1: %d, buf_size2: %d\n", buf_size1, buf_size2);
+	switch (ctx->codec_mode) {
+	case S5P_FIMV_CODEC_H264_ENC:
+		for (i = 0; i < 2; i++) {
+			mfc_write(dev, OFFSETA(buf_addr1),
+				S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i));
+			buf_addr1 += enc_ref_y_size;
+			buf_size1 -= enc_ref_y_size;
+
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_y_size;
+			buf_size2 -= enc_ref_y_size;
+		}
+		for (i = 0; i < 4; i++) {
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_c_size;
+			buf_size2 -= enc_ref_c_size;
+		}
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H264_UP_MV_ADR);
+		buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+					S5P_FIMV_H264_COZERO_FLAG_ADR);
+		buf_addr1 += S5P_FIMV_ENC_COLFLG_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_COLFLG_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+					S5P_FIMV_H264_UP_INTRA_MD_ADR);
+		buf_addr1 += S5P_FIMV_ENC_INTRAMD_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_INTRAMD_SIZE;
+		mfc_write(dev, OFFSETB(buf_addr2),
+					S5P_FIMV_H264_UP_INTRA_PRED_ADR);
+		buf_addr2 += S5P_FIMV_ENC_INTRAPRED_SIZE;
+		buf_size2 -= S5P_FIMV_ENC_INTRAPRED_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+					S5P_FIMV_H264_NBOR_INFO_ADR);
+		buf_addr1 += S5P_FIMV_ENC_NBORINFO_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_NBORINFO_SIZE;
+		mfc_debug(2, "buf_size1: %d, buf_size2: %d\n",
+			buf_size1, buf_size2);
+		break;
+	case S5P_FIMV_CODEC_MPEG4_ENC:
+		for (i = 0; i < 2; i++) {
+			mfc_write(dev, OFFSETA(buf_addr1),
+				S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i));
+			buf_addr1 += enc_ref_y_size;
+			buf_size1 -= enc_ref_y_size;
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_y_size;
+			buf_size2 -= enc_ref_y_size;
+		}
+		for (i = 0; i < 4; i++) {
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_c_size;
+			buf_size2 -= enc_ref_c_size;
+		}
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_MPEG4_UP_MV_ADR);
+		buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+						S5P_FIMV_MPEG4_COZERO_FLAG_ADR);
+		buf_addr1 += S5P_FIMV_ENC_COLFLG_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_COLFLG_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1),
+						S5P_FIMV_MPEG4_ACDC_COEF_ADR);
+		buf_addr1 += S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		mfc_debug(2, "buf_size1: %d, buf_size2: %d\n",
+			buf_size1, buf_size2);
+		break;
+	case S5P_FIMV_CODEC_H263_ENC:
+		for (i = 0; i < 2; i++) {
+			mfc_write(dev, OFFSETA(buf_addr1),
+				S5P_FIMV_ENC_REF0_LUMA_ADR + (4 * i));
+			buf_addr1 += enc_ref_y_size;
+			buf_size1 -= enc_ref_y_size;
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF2_LUMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_y_size;
+			buf_size2 -= enc_ref_y_size;
+		}
+		for (i = 0; i < 4; i++) {
+			mfc_write(dev, OFFSETB(buf_addr2),
+				S5P_FIMV_ENC_REF0_CHROMA_ADR + (4 * i));
+			buf_addr2 += enc_ref_c_size;
+			buf_size2 -= enc_ref_c_size;
+		}
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_UP_MV_ADR);
+		buf_addr1 += S5P_FIMV_ENC_UPMV_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_UPMV_SIZE;
+		mfc_write(dev, OFFSETA(buf_addr1), S5P_FIMV_H263_ACDC_COEF_ADR);
+		buf_addr1 += S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		buf_size1 -= S5P_FIMV_ENC_ACDCCOEF_SIZE;
+		mfc_debug(2, "buf_size1: %d, buf_size2: %d\n",
+			buf_size1, buf_size2);
+		break;
+	default:
+		mfc_err("Unknown codec set for encoding: %d\n",
+			ctx->codec_mode);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	unsigned int reg;
+	unsigned int shm;
+
+	/* width */
+	mfc_write(dev, ctx->img_width, S5P_FIMV_ENC_HSIZE_PX);
+	/* height */
+	mfc_write(dev, ctx->img_height, S5P_FIMV_ENC_VSIZE_PX);
+	/* pictype : enable, IDR period */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	reg |= (1 << 18);
+	reg &= ~(0xFFFF);
+	reg |= p->gop_size;
+	mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	mfc_write(dev, 0, S5P_FIMV_ENC_B_RECON_WRITE_ON);
+	/* multi-slice control */
+	/* multi-slice MB number or bit size */
+	mfc_write(dev, p->slice_mode, S5P_FIMV_ENC_MSLICE_CTRL);
+	if (p->slice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB) {
+		mfc_write(dev, p->slice_mb, S5P_FIMV_ENC_MSLICE_MB);
+	} else if (p->slice_mode == V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES) {
+		mfc_write(dev, p->slice_bit, S5P_FIMV_ENC_MSLICE_BIT);
+	} else {
+		mfc_write(dev, 0, S5P_FIMV_ENC_MSLICE_MB);
+		mfc_write(dev, 0, S5P_FIMV_ENC_MSLICE_BIT);
+	}
+	/* cyclic intra refresh */
+	mfc_write(dev, p->intra_refresh_mb, S5P_FIMV_ENC_CIR_CTRL);
+	/* memory structure cur. frame */
+	if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M)
+		mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR);
+	else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT)
+		mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR);
+	/* padding control & value */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PADDING_CTRL);
+	if (p->pad) {
+		/** enable */
+		reg |= (1 << 31);
+		/** cr value */
+		reg &= ~(0xFF << 16);
+		reg |= (p->pad_cr << 16);
+		/** cb value */
+		reg &= ~(0xFF << 8);
+		reg |= (p->pad_cb << 8);
+		/** y value */
+		reg &= ~(0xFF);
+		reg |= (p->pad_luma);
+	} else {
+		/** disable & all value clear */
+		reg = 0;
+	}
+	mfc_write(dev, reg, S5P_FIMV_ENC_PADDING_CTRL);
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/** frame-level rate control */
+	reg &= ~(0x1 << 9);
+	reg |= (p->rc_frame << 9);
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* bit rate */
+	if (p->rc_frame)
+		mfc_write(dev, p->rc_bitrate,
+			S5P_FIMV_ENC_RC_BIT_RATE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_BIT_RATE);
+	/* reaction coefficient */
+	if (p->rc_frame)
+		mfc_write(dev, p->rc_reaction_coeff, S5P_FIMV_ENC_RC_RPARA);
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* seq header ctrl */
+	shm &= ~(0x1 << 3);
+	shm |= (p->seq_hdr_mode << 3);
+	/* frame skip mode */
+	shm &= ~(0x3 << 1);
+	shm |= (p->frame_skip_mode << 1);
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	/* fixed target bit */
+	s5p_mfc_write_shm(ctx, p->fixed_target_bit, RC_CONTROL_CONFIG);
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_h264_enc_params *p_264 = &p->codec.h264;
+	unsigned int reg;
+	unsigned int shm;
+
+	s5p_mfc_set_enc_params(ctx);
+	/* pictype : number of B */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* num_b_frame - 0 ~ 2 */
+	reg &= ~(0x3 << 16);
+	reg |= (p->num_b_frame << 16);
+	mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* profile & level */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PROFILE);
+	/* level */
+	reg &= ~(0xFF << 8);
+	reg |= (p_264->level << 8);
+	/* profile - 0 ~ 2 */
+	reg &= ~(0x3F);
+	reg |= p_264->profile;
+	mfc_write(dev, reg, S5P_FIMV_ENC_PROFILE);
+	/* interlace  */
+	mfc_write(dev, p->interlace, S5P_FIMV_ENC_PIC_STRUCT);
+	/* height */
+	if (p->interlace)
+		mfc_write(dev, ctx->img_height >> 1, S5P_FIMV_ENC_VSIZE_PX);
+	/* loopfilter ctrl */
+	mfc_write(dev, p_264->loop_filter_mode, S5P_FIMV_ENC_LF_CTRL);
+	/* loopfilter alpha offset */
+	if (p_264->loop_filter_alpha < 0) {
+		reg = 0x10;
+		reg |= (0xFF - p_264->loop_filter_alpha) + 1;
+	} else {
+		reg = 0x00;
+		reg |= (p_264->loop_filter_alpha & 0xF);
+	}
+	mfc_write(dev, reg, S5P_FIMV_ENC_ALPHA_OFF);
+	/* loopfilter beta offset */
+	if (p_264->loop_filter_beta < 0) {
+		reg = 0x10;
+		reg |= (0xFF - p_264->loop_filter_beta) + 1;
+	} else {
+		reg = 0x00;
+		reg |= (p_264->loop_filter_beta & 0xF);
+	}
+	mfc_write(dev, reg, S5P_FIMV_ENC_BETA_OFF);
+	/* entropy coding mode */
+	if (p_264->entropy_mode == V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC)
+		mfc_write(dev, 1, S5P_FIMV_ENC_H264_ENTROPY_MODE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_H264_ENTROPY_MODE);
+	/* number of ref. picture */
+	reg = mfc_read(dev, S5P_FIMV_ENC_H264_NUM_OF_REF);
+	/* num of ref. pictures of P */
+	reg &= ~(0x3 << 5);
+	reg |= (p_264->num_ref_pic_4p << 5);
+	/* max number of ref. pictures */
+	reg &= ~(0x1F);
+	reg |= p_264->max_ref_pic;
+	mfc_write(dev, reg, S5P_FIMV_ENC_H264_NUM_OF_REF);
+	/* 8x8 transform enable */
+	mfc_write(dev, p_264->_8x8_transform, S5P_FIMV_ENC_H264_TRANS_FLAG);
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/* macroblock level rate control */
+	reg &= ~(0x1 << 8);
+	reg |= (p_264->rc_mb << 8);
+	/* frame QP */
+	reg &= ~(0x3F);
+	reg |= p_264->rc_frame_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* frame rate */
+	if (p->rc_frame && p->rc_framerate_denom)
+		mfc_write(dev, p->rc_framerate_num * 1000
+			/ p->rc_framerate_denom, S5P_FIMV_ENC_RC_FRAME_RATE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE);
+	/* max & min value of QP */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND);
+	/* max QP */
+	reg &= ~(0x3F << 8);
+	reg |= (p_264->rc_max_qp << 8);
+	/* min QP */
+	reg &= ~(0x3F);
+	reg |= p_264->rc_min_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND);
+	/* macroblock adaptive scaling features */
+	if (p_264->rc_mb) {
+		reg = mfc_read(dev, S5P_FIMV_ENC_RC_MB_CTRL);
+		/* dark region */
+		reg &= ~(0x1 << 3);
+		reg |= (p_264->rc_mb_dark << 3);
+		/* smooth region */
+		reg &= ~(0x1 << 2);
+		reg |= (p_264->rc_mb_smooth << 2);
+		/* static region */
+		reg &= ~(0x1 << 1);
+		reg |= (p_264->rc_mb_static << 1);
+		/* high activity region */
+		reg &= ~(0x1);
+		reg |= p_264->rc_mb_activity;
+		mfc_write(dev, reg, S5P_FIMV_ENC_RC_MB_CTRL);
+	}
+	if (!p->rc_frame &&
+	    !p_264->rc_mb) {
+		shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP);
+		shm &= ~(0xFFF);
+		shm |= ((p_264->rc_b_frame_qp & 0x3F) << 6);
+		shm |= (p_264->rc_p_frame_qp & 0x3F);
+		s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP);
+	}
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* AR VUI control */
+	shm &= ~(0x1 << 15);
+	shm |= (p_264->vui_sar << 1);
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	if (p_264->vui_sar) {
+		/* aspect ration IDC */
+		shm = s5p_mfc_read_shm(ctx, SAMPLE_ASPECT_RATIO_IDC);
+		shm &= ~(0xFF);
+		shm |= p_264->vui_sar_idc;
+		s5p_mfc_write_shm(ctx, shm, SAMPLE_ASPECT_RATIO_IDC);
+		if (p_264->vui_sar_idc == 0xFF) {
+			/* sample  AR info */
+			shm = s5p_mfc_read_shm(ctx, EXTENDED_SAR);
+			shm &= ~(0xFFFFFFFF);
+			shm |= p_264->vui_ext_sar_width << 16;
+			shm |= p_264->vui_ext_sar_height;
+			s5p_mfc_write_shm(ctx, shm, EXTENDED_SAR);
+		}
+	}
+	/* intra picture period for H.264 */
+	shm = s5p_mfc_read_shm(ctx, H264_I_PERIOD);
+	/* control */
+	shm &= ~(0x1 << 16);
+	shm |= (p_264->open_gop << 16);
+	/* value */
+	if (p_264->open_gop) {
+		shm &= ~(0xFFFF);
+		shm |= p_264->open_gop_size;
+	}
+	s5p_mfc_write_shm(ctx, shm, H264_I_PERIOD);
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* vbv buffer size */
+	if (p->frame_skip_mode ==
+			V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) {
+		shm &= ~(0xFFFF << 16);
+		shm |= (p_264->cpb_size << 16);
+	}
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params_mpeg4(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_mpeg4_enc_params *p_mpeg4 = &p->codec.mpeg4;
+	unsigned int reg;
+	unsigned int shm;
+	unsigned int framerate;
+
+	s5p_mfc_set_enc_params(ctx);
+	/* pictype : number of B */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* num_b_frame - 0 ~ 2 */
+	reg &= ~(0x3 << 16);
+	reg |= (p->num_b_frame << 16);
+	mfc_write(dev, reg, S5P_FIMV_ENC_PIC_TYPE_CTRL);
+	/* profile & level */
+	reg = mfc_read(dev, S5P_FIMV_ENC_PROFILE);
+	/* level */
+	reg &= ~(0xFF << 8);
+	reg |= (p_mpeg4->level << 8);
+	/* profile - 0 ~ 2 */
+	reg &= ~(0x3F);
+	reg |= p_mpeg4->profile;
+	mfc_write(dev, reg, S5P_FIMV_ENC_PROFILE);
+	/* quarter_pixel */
+	mfc_write(dev, p_mpeg4->quarter_pixel, S5P_FIMV_ENC_MPEG4_QUART_PXL);
+	/* qp */
+	if (!p->rc_frame) {
+		shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP);
+		shm &= ~(0xFFF);
+		shm |= ((p_mpeg4->rc_b_frame_qp & 0x3F) << 6);
+		shm |= (p_mpeg4->rc_p_frame_qp & 0x3F);
+		s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP);
+	}
+	/* frame rate */
+	if (p->rc_frame) {
+		if (p->rc_framerate_denom > 0) {
+			framerate = p->rc_framerate_num * 1000 /
+						p->rc_framerate_denom;
+			mfc_write(dev, framerate,
+				S5P_FIMV_ENC_RC_FRAME_RATE);
+			shm = s5p_mfc_read_shm(ctx, RC_VOP_TIMING);
+			shm &= ~(0xFFFFFFFF);
+			shm |= (1 << 31);
+			shm |= ((p->rc_framerate_num & 0x7FFF) << 16);
+			shm |= (p->rc_framerate_denom & 0xFFFF);
+			s5p_mfc_write_shm(ctx, shm, RC_VOP_TIMING);
+		}
+	} else {
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE);
+	}
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/* frame QP */
+	reg &= ~(0x3F);
+	reg |= p_mpeg4->rc_frame_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* max & min value of QP */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND);
+	/* max QP */
+	reg &= ~(0x3F << 8);
+	reg |= (p_mpeg4->rc_max_qp << 8);
+	/* min QP */
+	reg &= ~(0x3F);
+	reg |= p_mpeg4->rc_min_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND);
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* vbv buffer size */
+	if (p->frame_skip_mode ==
+			V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) {
+		shm &= ~(0xFFFF << 16);
+		shm |= (p->vbv_size << 16);
+	}
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	return 0;
+}
+
+static int s5p_mfc_set_enc_params_h263(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_enc_params *p = &ctx->enc_params;
+	struct s5p_mfc_mpeg4_enc_params *p_h263 = &p->codec.mpeg4;
+	unsigned int reg;
+	unsigned int shm;
+
+	s5p_mfc_set_enc_params(ctx);
+	/* qp */
+	if (!p->rc_frame) {
+		shm = s5p_mfc_read_shm(ctx, P_B_FRAME_QP);
+		shm &= ~(0xFFF);
+		shm |= (p_h263->rc_p_frame_qp & 0x3F);
+		s5p_mfc_write_shm(ctx, shm, P_B_FRAME_QP);
+	}
+	/* frame rate */
+	if (p->rc_frame && p->rc_framerate_denom)
+		mfc_write(dev, p->rc_framerate_num * 1000
+			/ p->rc_framerate_denom, S5P_FIMV_ENC_RC_FRAME_RATE);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_RC_FRAME_RATE);
+	/* rate control config. */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_CONFIG);
+	/* frame QP */
+	reg &= ~(0x3F);
+	reg |= p_h263->rc_frame_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_CONFIG);
+	/* max & min value of QP */
+	reg = mfc_read(dev, S5P_FIMV_ENC_RC_QBOUND);
+	/* max QP */
+	reg &= ~(0x3F << 8);
+	reg |= (p_h263->rc_max_qp << 8);
+	/* min QP */
+	reg &= ~(0x3F);
+	reg |= p_h263->rc_min_qp;
+	mfc_write(dev, reg, S5P_FIMV_ENC_RC_QBOUND);
+	/* extended encoder ctrl */
+	shm = s5p_mfc_read_shm(ctx, EXT_ENC_CONTROL);
+	/* vbv buffer size */
+	if (p->frame_skip_mode ==
+			V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT) {
+		shm &= ~(0xFFFF << 16);
+		shm |= (p->vbv_size << 16);
+	}
+	s5p_mfc_write_shm(ctx, shm, EXT_ENC_CONTROL);
+	return 0;
+}
+
+/* Initialize decoding */
+int s5p_mfc_init_decode(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	s5p_mfc_set_shared_buffer(ctx);
+	/* Setup loop filter, for decoding this is only valid for MPEG4 */
+	if (ctx->codec_mode == S5P_FIMV_CODEC_MPEG4_DEC)
+		mfc_write(dev, ctx->loop_filter_mpeg4, S5P_FIMV_ENC_LF_CTRL);
+	else
+		mfc_write(dev, 0, S5P_FIMV_ENC_LF_CTRL);
+	mfc_write(dev, ((ctx->slice_interface & S5P_FIMV_SLICE_INT_MASK) <<
+		S5P_FIMV_SLICE_INT_SHIFT) | (ctx->display_delay_enable <<
+		S5P_FIMV_DDELAY_ENA_SHIFT) | ((ctx->display_delay &
+		S5P_FIMV_DDELAY_VAL_MASK) << S5P_FIMV_DDELAY_VAL_SHIFT),
+		S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
+	mfc_write(dev,
+	((S5P_FIMV_CH_SEQ_HEADER & S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT)
+				| (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+static void s5p_mfc_set_flush(struct s5p_mfc_ctx *ctx, int flush)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned int dpb;
+
+	if (flush)
+		dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) | (
+			S5P_FIMV_DPB_FLUSH_MASK << S5P_FIMV_DPB_FLUSH_SHIFT);
+	else
+		dpb = mfc_read(dev, S5P_FIMV_SI_CH0_DPB_CONF_CTRL) &
+			~(S5P_FIMV_DPB_FLUSH_MASK << S5P_FIMV_DPB_FLUSH_SHIFT);
+	mfc_write(dev, dpb, S5P_FIMV_SI_CH0_DPB_CONF_CTRL);
+}
+
+/* Decode a single frame */
+int s5p_mfc_decode_one_frame(struct s5p_mfc_ctx *ctx,
+					enum s5p_mfc_decode_arg last_frame)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	mfc_write(dev, ctx->dec_dst_flag, S5P_FIMV_SI_CH0_RELEASE_BUF);
+	s5p_mfc_set_shared_buffer(ctx);
+	s5p_mfc_set_flush(ctx, ctx->dpb_flush_flag);
+	/* Issue different commands to instance basing on whether it
+	 * is the last frame or not. */
+	switch (last_frame) {
+	case MFC_DEC_FRAME:
+		mfc_write(dev, ((S5P_FIMV_CH_FRAME_START & S5P_FIMV_CH_MASK) <<
+		S5P_FIMV_CH_SHIFT) | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+		break;
+	case MFC_DEC_LAST_FRAME:
+		mfc_write(dev, ((S5P_FIMV_CH_LAST_FRAME & S5P_FIMV_CH_MASK) <<
+		S5P_FIMV_CH_SHIFT) | (ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+		break;
+	case MFC_DEC_RES_CHANGE:
+		mfc_write(dev, ((S5P_FIMV_CH_FRAME_START_REALLOC &
+		S5P_FIMV_CH_MASK) << S5P_FIMV_CH_SHIFT) | (ctx->inst_no),
+		S5P_FIMV_SI_CH0_INST_ID);
+		break;
+	}
+	mfc_debug(2, "Decoding a usual frame\n");
+	return 0;
+}
+
+int s5p_mfc_init_encode(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	if (ctx->codec_mode == S5P_FIMV_CODEC_H264_ENC)
+		s5p_mfc_set_enc_params_h264(ctx);
+	else if (ctx->codec_mode == S5P_FIMV_CODEC_MPEG4_ENC)
+		s5p_mfc_set_enc_params_mpeg4(ctx);
+	else if (ctx->codec_mode == S5P_FIMV_CODEC_H263_ENC)
+		s5p_mfc_set_enc_params_h263(ctx);
+	else {
+		mfc_err("Unknown codec for encoding (%x)\n",
+			ctx->codec_mode);
+		return -EINVAL;
+	}
+	s5p_mfc_set_shared_buffer(ctx);
+	mfc_write(dev, ((S5P_FIMV_CH_SEQ_HEADER << 16) & 0x70000) |
+		(ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+/* Encode a single frame */
+int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	/* memory structure cur. frame */
+	if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12M)
+		mfc_write(dev, 0, S5P_FIMV_ENC_MAP_FOR_CUR);
+	else if (ctx->src_fmt->fourcc == V4L2_PIX_FMT_NV12MT)
+		mfc_write(dev, 3, S5P_FIMV_ENC_MAP_FOR_CUR);
+	s5p_mfc_set_shared_buffer(ctx);
+	mfc_write(dev, (S5P_FIMV_CH_FRAME_START << 16 & 0x70000) |
+		(ctx->inst_no), S5P_FIMV_SI_CH0_INST_ID);
+	return 0;
+}
+
+static int s5p_mfc_get_new_ctx(struct s5p_mfc_dev *dev)
+{
+	unsigned long flags;
+	int new_ctx;
+	int cnt;
+
+	spin_lock_irqsave(&dev->condlock, flags);
+	new_ctx = (dev->curr_ctx + 1) % MFC_NUM_CONTEXTS;
+	cnt = 0;
+	while (!test_bit(new_ctx, &dev->ctx_work_bits)) {
+		new_ctx = (new_ctx + 1) % MFC_NUM_CONTEXTS;
+		if (++cnt > MFC_NUM_CONTEXTS) {
+			/* No contexts to run */
+			spin_unlock_irqrestore(&dev->condlock, flags);
+			return -EAGAIN;
+		}
+	}
+	spin_unlock_irqrestore(&dev->condlock, flags);
+	return new_ctx;
+}
+
+static void s5p_mfc_run_res_change(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+
+	s5p_mfc_set_dec_stream_buffer(ctx, 0, 0, 0);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_decode_one_frame(ctx, MFC_DEC_RES_CHANGE);
+}
+
+static int s5p_mfc_run_dec_frame(struct s5p_mfc_ctx *ctx, int last_frame)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	struct s5p_mfc_buf *temp_vb;
+	unsigned long flags;
+	unsigned int index;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	/* Frames are being decoded */
+	if (list_empty(&ctx->src_queue)) {
+		mfc_debug(2, "No src buffers\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EAGAIN;
+	}
+	/* Get the next source buffer */
+	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	temp_vb->used = 1;
+	s5p_mfc_set_dec_stream_buffer(ctx,
+		vb2_dma_contig_plane_paddr(temp_vb->b, 0), ctx->consumed_stream,
+					temp_vb->b->v4l2_planes[0].bytesused);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	index = temp_vb->b->v4l2_buf.index;
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	if (temp_vb->b->v4l2_planes[0].bytesused == 0) {
+		last_frame = MFC_DEC_LAST_FRAME;
+		mfc_debug(2, "Setting ctx->state to FINISHING\n");
+		ctx->state = MFCINST_FINISHING;
+	}
+	s5p_mfc_decode_one_frame(ctx, last_frame);
+	return 0;
+}
+
+static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *dst_mb;
+	struct s5p_mfc_buf *src_mb;
+	unsigned long src_y_addr, src_c_addr, dst_addr;
+	unsigned int dst_size;
+
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (list_empty(&ctx->src_queue)) {
+		mfc_debug(2, "no src buffers\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EAGAIN;
+	}
+	if (list_empty(&ctx->dst_queue)) {
+		mfc_debug(2, "no dst buffers\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EAGAIN;
+	}
+	src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	src_mb->used = 1;
+	src_y_addr = vb2_dma_contig_plane_paddr(src_mb->b, 0);
+	src_c_addr = vb2_dma_contig_plane_paddr(src_mb->b, 1);
+	s5p_mfc_set_enc_frame_buffer(ctx, src_y_addr, src_c_addr);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_mb->used = 1;
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_encode_one_frame(ctx);
+	return 0;
+}
+
+static void s5p_mfc_run_init_dec(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *temp_vb;
+
+	/* Initializing decoding - parsing header */
+	spin_lock_irqsave(&dev->irqlock, flags);
+	mfc_debug(2, "Preparing to init decoding\n");
+	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	s5p_mfc_set_dec_desc_buffer(ctx);
+	mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused);
+	s5p_mfc_set_dec_stream_buffer(ctx,
+				vb2_dma_contig_plane_paddr(temp_vb->b, 0),
+				0, temp_vb->b->v4l2_planes[0].bytesused);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_init_decode(ctx);
+}
+
+static void s5p_mfc_run_init_enc(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *dst_mb;
+	unsigned long dst_addr;
+	unsigned int dst_size;
+
+	s5p_mfc_set_enc_ref_buffer(ctx);
+	spin_lock_irqsave(&dev->irqlock, flags);
+	dst_mb = list_entry(ctx->dst_queue.next, struct s5p_mfc_buf, list);
+	dst_addr = vb2_dma_contig_plane_paddr(dst_mb->b, 0);
+	dst_size = vb2_plane_size(dst_mb->b, 0);
+	s5p_mfc_set_enc_stream_buffer(ctx, dst_addr, dst_size);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	s5p_mfc_init_encode(ctx);
+}
+
+static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	unsigned long flags;
+	struct s5p_mfc_buf *temp_vb;
+	int ret;
+
+	/*
+	 * Header was parsed now starting processing
+	 * First set the output frame buffers
+	 */
+	if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
+		mfc_err("It seems that not all destionation buffers were "
+			"mmaped\nMFC requires that all destination are mmaped "
+			"before starting processing\n");
+		return -EAGAIN;
+	}
+	spin_lock_irqsave(&dev->irqlock, flags);
+	if (list_empty(&ctx->src_queue)) {
+		mfc_err("Header has been deallocated in the middle of"
+			" initialization\n");
+		spin_unlock_irqrestore(&dev->irqlock, flags);
+		return -EIO;
+	}
+	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);
+	mfc_debug(2, "Header size: %d\n", temp_vb->b->v4l2_planes[0].bytesused);
+	s5p_mfc_set_dec_stream_buffer(ctx,
+				vb2_dma_contig_plane_paddr(temp_vb->b, 0),
+				0, temp_vb->b->v4l2_planes[0].bytesused);
+	spin_unlock_irqrestore(&dev->irqlock, flags);
+	dev->curr_ctx = ctx->num;
+	s5p_mfc_clean_ctx_int_flags(ctx);
+	ret = s5p_mfc_set_dec_frame_buffer(ctx);
+	if (ret) {
+		mfc_err("Failed to alloc frame mem\n");
+		ctx->state = MFCINST_ERROR;
+	}
+	return ret;
+}
+
+/* Try running an operation on hardware */
+void s5p_mfc_try_run(struct s5p_mfc_dev *dev)
+{
+	struct s5p_mfc_ctx *ctx;
+	int new_ctx;
+	unsigned int ret = 0;
+
+	if (test_bit(0, &dev->enter_suspend)) {
+		mfc_debug(1, "Entering suspend so do not schedule any jobs\n");
+		return;
+	}
+	/* Check whether hardware is not running */
+	if (test_and_set_bit(0, &dev->hw_lock) != 0) {
+		/* This is perfectly ok, the scheduled ctx should wait */
+		mfc_debug(1, "Couldn't lock HW\n");
+		return;
+	}
+	/* Choose the context to run */
+	new_ctx = s5p_mfc_get_new_ctx(dev);
+	if (new_ctx < 0) {
+		/* No contexts to run */
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0) {
+			mfc_err("Failed to unlock hardware\n");
+			return;
+		}
+		mfc_debug(1, "No ctx is scheduled to be run\n");
+		return;
+	}
+	ctx = dev->ctx[new_ctx];
+	/* Got context to run in ctx */
+	/*
+	 * Last frame has already been sent to MFC.
+	 * Now obtaining frames from MFC buffer
+	 */
+	s5p_mfc_clock_on();
+	if (ctx->type == MFCINST_DECODER) {
+		s5p_mfc_set_dec_desc_buffer(ctx);
+		switch (ctx->state) {
+		case MFCINST_FINISHING:
+			s5p_mfc_run_dec_frame(ctx, MFC_DEC_LAST_FRAME);
+			break;
+		case MFCINST_RUNNING:
+			ret = s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME);
+			break;
+		case MFCINST_INIT:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_open_inst_cmd(ctx);
+			break;
+		case MFCINST_RETURN_INST:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_close_inst_cmd(ctx);
+			break;
+		case MFCINST_GOT_INST:
+			s5p_mfc_run_init_dec(ctx);
+			break;
+		case MFCINST_HEAD_PARSED:
+			ret = s5p_mfc_run_init_dec_buffers(ctx);
+			mfc_debug(1, "head parsed\n");
+			break;
+		case MFCINST_RES_CHANGE_INIT:
+			s5p_mfc_run_res_change(ctx);
+			break;
+		case MFCINST_RES_CHANGE_FLUSH:
+			s5p_mfc_run_dec_frame(ctx, MFC_DEC_FRAME);
+			break;
+		case MFCINST_RES_CHANGE_END:
+			mfc_debug(2, "Finished remaining frames after resolution change\n");
+			ctx->capture_state = QUEUE_FREE;
+			mfc_debug(2, "Will re-init the codec\n");
+			s5p_mfc_run_init_dec(ctx);
+			break;
+		default:
+			ret = -EAGAIN;
+		}
+	} else if (ctx->type == MFCINST_ENCODER) {
+		switch (ctx->state) {
+		case MFCINST_FINISHING:
+		case MFCINST_RUNNING:
+			ret = s5p_mfc_run_enc_frame(ctx);
+			break;
+		case MFCINST_INIT:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_open_inst_cmd(ctx);
+			break;
+		case MFCINST_RETURN_INST:
+			s5p_mfc_clean_ctx_int_flags(ctx);
+			ret = s5p_mfc_close_inst_cmd(ctx);
+			break;
+		case MFCINST_GOT_INST:
+			s5p_mfc_run_init_enc(ctx);
+			break;
+		default:
+			ret = -EAGAIN;
+		}
+	} else {
+		mfc_err("Invalid context type: %d\n", ctx->type);
+		ret = -EAGAIN;
+	}
+
+	if (ret) {
+		/* Free hardware lock */
+		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
+			mfc_err("Failed to unlock hardware\n");
+
+		/* This is in deed imporant, as no operation has been
+		 * scheduled, reduce the clock count as no one will
+		 * ever do this, because no interrupt related to this try_run
+		 * will ever come from hardware. */
+		s5p_mfc_clock_off();
+	}
+}
+
+
+void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq)
+{
+	struct s5p_mfc_buf *b;
+	int i;
+
+	while (!list_empty(lh)) {
+		b = list_entry(lh->next, struct s5p_mfc_buf, list);
+		for (i = 0; i < b->b->num_planes; i++)
+			vb2_set_plane_payload(b->b, i, 0);
+		vb2_buffer_done(b->b, VB2_BUF_STATE_ERROR);
+		list_del(&b->list);
+	}
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_opr.h b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
new file mode 100644
index 00000000000..db83836e6a9
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_opr.h
@@ -0,0 +1,91 @@
+/*
+ * drivers/media/video/samsung/mfc5/s5p_mfc_opr.h
+ *
+ * Header file for Samsung MFC (Multi Function Codec - FIMV) driver
+ * Contains declarations of hw related functions.
+ *
+ * Kamil Debski, Copyright (C) 2011 Samsung Electronics
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef S5P_MFC_OPR_H_
+#define S5P_MFC_OPR_H_
+
+#include "s5p_mfc_common.h"
+
+int s5p_mfc_init_decode(struct s5p_mfc_ctx *ctx);
+int s5p_mfc_init_encode(struct s5p_mfc_ctx *mfc_ctx);
+
+/* Decoding functions */
+int s5p_mfc_set_dec_frame_buffer(struct s5p_mfc_ctx *ctx);
+int s5p_mfc_set_dec_stream_buffer(struct s5p_mfc_ctx *ctx, int buf_addr,
+						  unsigned int start_num_byte,
+						  unsigned int buf_size);
+
+/* Encoding functions */
+void s5p_mfc_set_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long y_addr, unsigned long c_addr);
+int s5p_mfc_set_enc_stream_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long addr, unsigned int size);
+void s5p_mfc_get_enc_frame_buffer(struct s5p_mfc_ctx *ctx,
+		unsigned long *y_addr, unsigned long *c_addr);
+int s5p_mfc_set_enc_ref_buffer(struct s5p_mfc_ctx *mfc_ctx);
+
+int s5p_mfc_decode_one_frame(struct s5p_mfc_ctx *ctx,
+					enum s5p_mfc_decode_arg last_frame);
+int s5p_mfc_encode_one_frame(struct s5p_mfc_ctx *mfc_ctx);
+
+/* Memory allocation */
+int s5p_mfc_alloc_dec_temp_buffers(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_set_dec_desc_buffer(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_release_dec_desc_buffer(struct s5p_mfc_ctx *ctx);
+
+int s5p_mfc_alloc_codec_buffers(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_release_codec_buffers(struct s5p_mfc_ctx *ctx);
+
+int s5p_mfc_alloc_instance_buffer(struct s5p_mfc_ctx *ctx);
+void s5p_mfc_release_instance_buffer(struct s5p_mfc_ctx *ctx);
+
+void s5p_mfc_try_run(struct s5p_mfc_dev *dev);
+void s5p_mfc_cleanup_queue(struct list_head *lh, struct vb2_queue *vq);
+
+#define s5p_mfc_get_dspl_y_adr()	(readl(dev->regs_base + \
+					S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+					MFC_OFFSET_SHIFT)
+#define s5p_mfc_get_dec_y_adr()		(readl(dev->regs_base + \
+					S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+					MFC_OFFSET_SHIFT)
+#define s5p_mfc_get_dspl_status()	readl(dev->regs_base + \
+						S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_frame_type()	(readl(dev->regs_base + \
+						S5P_FIMV_DECODE_FRAME_TYPE) \
+					& S5P_FIMV_DECODE_FRAME_MASK)
+#define s5p_mfc_get_consumed_stream()	readl(dev->regs_base + \
+						S5P_FIMV_SI_CONSUMED_BYTES)
+#define s5p_mfc_get_int_reason()	(readl(dev->regs_base + \
+					S5P_FIMV_RISC2HOST_CMD) & \
+					S5P_FIMV_RISC2HOST_CMD_MASK)
+#define s5p_mfc_get_int_err()		readl(dev->regs_base + \
+						S5P_FIMV_RISC2HOST_ARG2)
+#define s5p_mfc_err_dec(x)		(((x) & S5P_FIMV_ERR_DEC_MASK) >> \
+							S5P_FIMV_ERR_DEC_SHIFT)
+#define s5p_mfc_err_dspl(x)		(((x) & S5P_FIMV_ERR_DSPL_MASK) >> \
+							S5P_FIMV_ERR_DSPL_SHIFT)
+#define s5p_mfc_get_img_width()		readl(dev->regs_base + \
+						S5P_FIMV_SI_HRESOL)
+#define s5p_mfc_get_img_height()	readl(dev->regs_base + \
+						S5P_FIMV_SI_VRESOL)
+#define s5p_mfc_get_dpb_count()		readl(dev->regs_base + \
+						S5P_FIMV_SI_BUF_NUMBER)
+#define s5p_mfc_get_inst_no()		readl(dev->regs_base + \
+						S5P_FIMV_RISC2HOST_ARG1)
+#define s5p_mfc_get_enc_strm_size()	readl(dev->regs_base + \
+						S5P_FIMV_ENC_SI_STRM_SIZE)
+#define s5p_mfc_get_enc_slice_type()	readl(dev->regs_base + \
+						S5P_FIMV_ENC_SI_SLICE_TYPE)
+
+#endif /* S5P_MFC_OPR_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.c b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c
new file mode 100644
index 00000000000..f6a3035c4fb
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.c
@@ -0,0 +1,117 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#ifdef CONFIG_PM_RUNTIME
+#include <linux/pm_runtime.h>
+#endif
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+#include "s5p_mfc_pm.h"
+
+#define MFC_CLKNAME		"sclk_mfc"
+#define MFC_GATE_CLK_NAME	"mfc"
+
+#define CLK_DEBUG
+
+static struct s5p_mfc_pm *pm;
+static struct s5p_mfc_dev *p_dev;
+
+#ifdef CLK_DEBUG
+atomic_t clk_ref;
+#endif
+
+int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
+{
+	int ret = 0;
+
+	pm = &dev->pm;
+	p_dev = dev;
+	pm->clock_gate = clk_get(&dev->plat_dev->dev, MFC_GATE_CLK_NAME);
+	if (IS_ERR(pm->clock_gate)) {
+		mfc_err("Failed to get clock-gating control\n");
+		ret = -ENOENT;
+		goto err_g_ip_clk;
+	}
+	pm->clock = clk_get(&dev->plat_dev->dev, MFC_CLKNAME);
+	if (IS_ERR(pm->clock)) {
+		mfc_err("Failed to get MFC clock\n");
+		ret = -ENOENT;
+		goto err_g_ip_clk_2;
+	}
+	atomic_set(&pm->power, 0);
+#ifdef CONFIG_PM_RUNTIME
+	pm->device = &dev->plat_dev->dev;
+	pm_runtime_enable(pm->device);
+#endif
+#ifdef CLK_DEBUG
+	atomic_set(&clk_ref, 0);
+#endif
+	return 0;
+err_g_ip_clk_2:
+	clk_put(pm->clock_gate);
+err_g_ip_clk:
+	return ret;
+}
+
+void s5p_mfc_final_pm(struct s5p_mfc_dev *dev)
+{
+	clk_put(pm->clock_gate);
+	clk_put(pm->clock);
+#ifdef CONFIG_PM_RUNTIME
+	pm_runtime_disable(pm->device);
+#endif
+}
+
+int s5p_mfc_clock_on(void)
+{
+	int ret;
+#ifdef CLK_DEBUG
+	atomic_inc(&clk_ref);
+	mfc_debug(3, "+ %d", atomic_read(&clk_ref));
+#endif
+	ret = clk_enable(pm->clock_gate);
+	return ret;
+}
+
+void s5p_mfc_clock_off(void)
+{
+#ifdef CLK_DEBUG
+	atomic_dec(&clk_ref);
+	mfc_debug(3, "- %d", atomic_read(&clk_ref));
+#endif
+	clk_disable(pm->clock_gate);
+}
+
+int s5p_mfc_power_on(void)
+{
+#ifdef CONFIG_PM_RUNTIME
+	return pm_runtime_get_sync(pm->device);
+#else
+	atomic_set(&pm->power, 1);
+	return 0;
+#endif
+}
+
+int s5p_mfc_power_off(void)
+{
+#ifdef CONFIG_PM_RUNTIME
+	return pm_runtime_put_sync(pm->device);
+#else
+	atomic_set(&pm->power, 0);
+	return 0;
+#endif
+}
+
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_pm.h b/drivers/media/video/s5p-mfc/s5p_mfc_pm.h
new file mode 100644
index 00000000000..5107914f27e
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_pm.h
@@ -0,0 +1,24 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_pm.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_PM_H_
+#define S5P_MFC_PM_H_
+
+int s5p_mfc_init_pm(struct s5p_mfc_dev *dev);
+void s5p_mfc_final_pm(struct s5p_mfc_dev *dev);
+
+int s5p_mfc_clock_on(void);
+void s5p_mfc_clock_off(void);
+int s5p_mfc_power_on(void);
+int s5p_mfc_power_off(void);
+
+#endif /* S5P_MFC_PM_H_ */
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.c b/drivers/media/video/s5p-mfc/s5p_mfc_shm.c
new file mode 100644
index 00000000000..91fdbac8c37
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.c
@@ -0,0 +1,47 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifdef CONFIG_ARCH_EXYNOS4
+#include <linux/dma-mapping.h>
+#endif
+#include <linux/io.h>
+#include "s5p_mfc_common.h"
+#include "s5p_mfc_debug.h"
+
+int s5p_mfc_init_shm(struct s5p_mfc_ctx *ctx)
+{
+	struct s5p_mfc_dev *dev = ctx->dev;
+	void *shm_alloc_ctx = dev->alloc_ctx[MFC_BANK1_ALLOC_CTX];
+
+	ctx->shm_alloc = vb2_dma_contig_memops.alloc(shm_alloc_ctx,
+							SHARED_BUF_SIZE);
+	if (IS_ERR(ctx->shm_alloc)) {
+		mfc_err("failed to allocate shared memory\n");
+		return PTR_ERR(ctx->shm_alloc);
+	}
+	/* shm_ofs only keeps the offset from base (port a) */
+	ctx->shm_ofs = s5p_mfc_mem_cookie(shm_alloc_ctx, ctx->shm_alloc)
+								- dev->bank1;
+	BUG_ON(ctx->shm_ofs & ((1 << MFC_BANK1_ALIGN_ORDER) - 1));
+	ctx->shm = vb2_dma_contig_memops.vaddr(ctx->shm_alloc);
+	if (!ctx->shm) {
+		vb2_dma_contig_memops.put(ctx->shm_alloc);
+		ctx->shm_ofs = 0;
+		ctx->shm_alloc = NULL;
+		mfc_err("failed to virt addr of shared memory\n");
+		return -ENOMEM;
+	}
+	memset((void *)ctx->shm, 0, SHARED_BUF_SIZE);
+	wmb();
+	return 0;
+}
+
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_shm.h b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
new file mode 100644
index 00000000000..764eac6bcc4
--- /dev/null
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
@@ -0,0 +1,91 @@
+/*
+ * linux/drivers/media/video/s5p-mfc/s5p_mfc_shm.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5P_MFC_SHM_H_
+#define S5P_MFC_SHM_H_
+
+enum MFC_SHM_OFS
+{
+	EXTENEDED_DECODE_STATUS	= 0x00,	/* D */
+	SET_FRAME_TAG		= 0x04, /* D */
+	GET_FRAME_TAG_TOP	= 0x08, /* D */
+	GET_FRAME_TAG_BOT	= 0x0C, /* D */
+	PIC_TIME_TOP		= 0x10, /* D */
+	PIC_TIME_BOT		= 0x14, /* D */
+	START_BYTE_NUM		= 0x18, /* D */
+
+	CROP_INFO_H		= 0x20, /* D */
+	CROP_INFO_V		= 0x24, /* D */
+	EXT_ENC_CONTROL		= 0x28,	/* E */
+	ENC_PARAM_CHANGE	= 0x2C,	/* E */
+	RC_VOP_TIMING		= 0x30,	/* E, MPEG4 */
+	HEC_PERIOD		= 0x34,	/* E, MPEG4 */
+	METADATA_ENABLE		= 0x38, /* C */
+	METADATA_STATUS		= 0x3C, /* C */
+	METADATA_DISPLAY_INDEX	= 0x40,	/* C */
+	EXT_METADATA_START_ADDR	= 0x44, /* C */
+	PUT_EXTRADATA		= 0x48, /* C */
+	EXTRADATA_ADDR		= 0x4C, /* C */
+
+	ALLOC_LUMA_DPB_SIZE	= 0x64,	/* D */
+	ALLOC_CHROMA_DPB_SIZE	= 0x68,	/* D */
+	ALLOC_MV_SIZE		= 0x6C,	/* D */
+	P_B_FRAME_QP		= 0x70,	/* E */
+	SAMPLE_ASPECT_RATIO_IDC	= 0x74, /* E, H.264, depend on
+				ASPECT_RATIO_VUI_ENABLE in EXT_ENC_CONTROL */
+	EXTENDED_SAR		= 0x78, /* E, H.264, depned on
+				ASPECT_RATIO_VUI_ENABLE in EXT_ENC_CONTROL */
+	DISP_PIC_PROFILE	= 0x7C, /* D */
+	FLUSH_CMD_TYPE		= 0x80, /* C */
+	FLUSH_CMD_INBUF1	= 0x84, /* C */
+	FLUSH_CMD_INBUF2	= 0x88, /* C */
+	FLUSH_CMD_OUTBUF	= 0x8C, /* E */
+	NEW_RC_BIT_RATE		= 0x90, /* E, format as RC_BIT_RATE(0xC5A8)
+			depend on RC_BIT_RATE_CHANGE in ENC_PARAM_CHANGE */
+	NEW_RC_FRAME_RATE	= 0x94, /* E, format as RC_FRAME_RATE(0xD0D0)
+			depend on RC_FRAME_RATE_CHANGE in ENC_PARAM_CHANGE */
+	NEW_I_PERIOD		= 0x98, /* E, format as I_FRM_CTRL(0xC504)
+			depend on I_PERIOD_CHANGE in ENC_PARAM_CHANGE */
+	H264_I_PERIOD		= 0x9C, /* E, H.264, open GOP */
+	RC_CONTROL_CONFIG	= 0xA0, /* E */
+	BATCH_INPUT_ADDR	= 0xA4, /* E */
+	BATCH_OUTPUT_ADDR	= 0xA8, /* E */
+	BATCH_OUTPUT_SIZE	= 0xAC, /* E */
+	MIN_LUMA_DPB_SIZE	= 0xB0, /* D */
+	DEVICE_FORMAT_ID	= 0xB4, /* C */
+	H264_POC_TYPE		= 0xB8, /* D */
+	MIN_CHROMA_DPB_SIZE	= 0xBC, /* D */
+	DISP_PIC_FRAME_TYPE	= 0xC0, /* D */
+	FREE_LUMA_DPB		= 0xC4, /* D, VC1 MPEG4 */
+	ASPECT_RATIO_INFO	= 0xC8, /* D, MPEG4 */
+	EXTENDED_PAR		= 0xCC, /* D, MPEG4 */
+	DBG_HISTORY_INPUT0	= 0xD0, /* C */
+	DBG_HISTORY_INPUT1	= 0xD4,	/* C */
+	DBG_HISTORY_OUTPUT	= 0xD8,	/* C */
+	HIERARCHICAL_P_QP	= 0xE0, /* E, H.264 */
+};
+
+int s5p_mfc_init_shm(struct s5p_mfc_ctx *ctx);
+
+#define s5p_mfc_write_shm(ctx, x, ofs)		\
+	do {					\
+		writel(x, (ctx->shm + ofs));	\
+		wmb();				\
+	} while (0)
+
+static inline u32 s5p_mfc_read_shm(struct s5p_mfc_ctx *ctx, unsigned int ofs)
+{
+	rmb();
+	return readl(ctx->shm + ofs);
+}
+
+#endif /* S5P_MFC_SHM_H_ */
diff --git a/drivers/media/video/s5p-tv/Kconfig b/drivers/media/video/s5p-tv/Kconfig
new file mode 100644
index 00000000000..9c37dee7bc5
--- /dev/null
+++ b/drivers/media/video/s5p-tv/Kconfig
@@ -0,0 +1,76 @@
+# drivers/media/video/s5p-tv/Kconfig
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+#	http://www.samsung.com/
+# Tomasz Stanislawski <t.stanislaws@samsung.com>
+#
+# Licensed under GPL
+
+config VIDEO_SAMSUNG_S5P_TV
+	bool "Samsung TV driver for S5P platform (experimental)"
+	depends on PLAT_S5P
+	depends on EXPERIMENTAL
+	default n
+	---help---
+	  Say Y here to enable selecting the TV output devices for
+	  Samsung S5P platform.
+
+if VIDEO_SAMSUNG_S5P_TV
+
+config VIDEO_SAMSUNG_S5P_HDMI
+	tristate "Samsung HDMI Driver"
+	depends on VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	select VIDEO_SAMSUNG_S5P_HDMIPHY
+	help
+	  Say Y here if you want support for the HDMI output
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an auxiliary driver, that exposes a V4L2
+	  subdev for use by other drivers. This driver requires
+	  hdmiphy driver to work correctly.
+
+config VIDEO_SAMSUNG_S5P_HDMI_DEBUG
+	bool "Enable debug for HDMI Driver"
+	depends on VIDEO_SAMSUNG_S5P_HDMI
+	default n
+	help
+	  Enables debugging for HDMI driver.
+
+config VIDEO_SAMSUNG_S5P_HDMIPHY
+	tristate "Samsung HDMIPHY Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2 && I2C
+	depends on VIDEO_SAMSUNG_S5P_TV
+	help
+	  Say Y here if you want support for the physical HDMI
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an I2C driver, that exposes a V4L2
+	  subdev for use by other drivers.
+
+config VIDEO_SAMSUNG_S5P_SDO
+	tristate "Samsung Analog TV Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	help
+	  Say Y here if you want support for the analog TV output
+	  interface in S5P Samsung SoC. The driver can be compiled
+	  as module. It is an auxiliary driver, that exposes a V4L2
+	  subdev for use by other drivers. This driver requires
+	  hdmiphy driver to work correctly.
+
+config VIDEO_SAMSUNG_S5P_MIXER
+	tristate "Samsung Mixer and Video Processor Driver"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on VIDEO_SAMSUNG_S5P_TV
+	select VIDEOBUF2_DMA_CONTIG
+	help
+	  Say Y here if you want support for the Mixer in Samsung S5P SoCs.
+	  This device produce image data to one of output interfaces.
+
+config VIDEO_SAMSUNG_S5P_MIXER_DEBUG
+	bool "Enable debug for Mixer Driver"
+	depends on VIDEO_SAMSUNG_S5P_MIXER
+	default n
+	help
+	  Enables debugging for Mixer driver.
+
+endif # VIDEO_SAMSUNG_S5P_TV
diff --git a/drivers/media/video/s5p-tv/Makefile b/drivers/media/video/s5p-tv/Makefile
new file mode 100644
index 00000000000..37e4c17663b
--- /dev/null
+++ b/drivers/media/video/s5p-tv/Makefile
@@ -0,0 +1,17 @@
+# drivers/media/video/samsung/tvout/Makefile
+#
+# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+#	http://www.samsung.com/
+# Tomasz Stanislawski <t.stanislaws@samsung.com>
+#
+# Licensed under GPL
+
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY) += s5p-hdmiphy.o
+s5p-hdmiphy-y += hdmiphy_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_HDMI) += s5p-hdmi.o
+s5p-hdmi-y += hdmi_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_SDO) += s5p-sdo.o
+s5p-sdo-y += sdo_drv.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MIXER) += s5p-mixer.o
+s5p-mixer-y += mixer_drv.o mixer_video.o mixer_reg.o mixer_grp_layer.o mixer_vp_layer.o
+
diff --git a/drivers/media/video/s5p-tv/hdmi_drv.c b/drivers/media/video/s5p-tv/hdmi_drv.c
new file mode 100644
index 00000000000..06d6663f459
--- /dev/null
+++ b/drivers/media/video/s5p-tv/hdmi_drv.c
@@ -0,0 +1,1042 @@
+/*
+ * Samsung HDMI interface driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#ifdef CONFIG_VIDEO_SAMSUNG_S5P_HDMI_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <media/v4l2-subdev.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/bug.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+
+#include "regs-hdmi.h"
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung HDMI");
+MODULE_LICENSE("GPL");
+
+/* default preset configured on probe */
+#define HDMI_DEFAULT_PRESET V4L2_DV_1080P60
+
+struct hdmi_resources {
+	struct clk *hdmi;
+	struct clk *sclk_hdmi;
+	struct clk *sclk_pixel;
+	struct clk *sclk_hdmiphy;
+	struct clk *hdmiphy;
+	struct regulator_bulk_data *regul_bulk;
+	int regul_count;
+};
+
+struct hdmi_device {
+	/** base address of HDMI registers */
+	void __iomem *regs;
+	/** HDMI interrupt */
+	unsigned int irq;
+	/** pointer to device parent */
+	struct device *dev;
+	/** subdev generated by HDMI device */
+	struct v4l2_subdev sd;
+	/** V4L2 device structure */
+	struct v4l2_device v4l2_dev;
+	/** subdev of HDMIPHY interface */
+	struct v4l2_subdev *phy_sd;
+	/** configuration of current graphic mode */
+	const struct hdmi_preset_conf *cur_conf;
+	/** current preset */
+	u32 cur_preset;
+	/** other resources */
+	struct hdmi_resources res;
+};
+
+struct hdmi_driver_data {
+	int hdmiphy_bus;
+};
+
+struct hdmi_tg_regs {
+	u8 cmd;
+	u8 h_fsz_l;
+	u8 h_fsz_h;
+	u8 hact_st_l;
+	u8 hact_st_h;
+	u8 hact_sz_l;
+	u8 hact_sz_h;
+	u8 v_fsz_l;
+	u8 v_fsz_h;
+	u8 vsync_l;
+	u8 vsync_h;
+	u8 vsync2_l;
+	u8 vsync2_h;
+	u8 vact_st_l;
+	u8 vact_st_h;
+	u8 vact_sz_l;
+	u8 vact_sz_h;
+	u8 field_chg_l;
+	u8 field_chg_h;
+	u8 vact_st2_l;
+	u8 vact_st2_h;
+	u8 vsync_top_hdmi_l;
+	u8 vsync_top_hdmi_h;
+	u8 vsync_bot_hdmi_l;
+	u8 vsync_bot_hdmi_h;
+	u8 field_top_hdmi_l;
+	u8 field_top_hdmi_h;
+	u8 field_bot_hdmi_l;
+	u8 field_bot_hdmi_h;
+};
+
+struct hdmi_core_regs {
+	u8 h_blank[2];
+	u8 v_blank[3];
+	u8 h_v_line[3];
+	u8 vsync_pol[1];
+	u8 int_pro_mode[1];
+	u8 v_blank_f[3];
+	u8 h_sync_gen[3];
+	u8 v_sync_gen1[3];
+	u8 v_sync_gen2[3];
+	u8 v_sync_gen3[3];
+};
+
+struct hdmi_preset_conf {
+	struct hdmi_core_regs core;
+	struct hdmi_tg_regs tg;
+	struct v4l2_mbus_framefmt mbus_fmt;
+};
+
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy", 0x38),
+};
+
+static struct hdmi_driver_data hdmi_driver_data[] = {
+	{ .hdmiphy_bus = 3 },
+	{ .hdmiphy_bus = 8 },
+};
+
+static struct platform_device_id hdmi_driver_types[] = {
+	{
+		.name		= "s5pv210-hdmi",
+		.driver_data	= (unsigned long)&hdmi_driver_data[0],
+	}, {
+		.name		= "exynos4-hdmi",
+		.driver_data	= (unsigned long)&hdmi_driver_data[1],
+	}, {
+		/* end node */
+	}
+};
+
+static const struct v4l2_subdev_ops hdmi_sd_ops;
+
+static struct hdmi_device *sd_to_hdmi_dev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct hdmi_device, sd);
+}
+
+static inline
+void hdmi_write(struct hdmi_device *hdev, u32 reg_id, u32 value)
+{
+	writel(value, hdev->regs + reg_id);
+}
+
+static inline
+void hdmi_write_mask(struct hdmi_device *hdev, u32 reg_id, u32 value, u32 mask)
+{
+	u32 old = readl(hdev->regs + reg_id);
+	value = (value & mask) | (old & ~mask);
+	writel(value, hdev->regs + reg_id);
+}
+
+static inline
+void hdmi_writeb(struct hdmi_device *hdev, u32 reg_id, u8 value)
+{
+	writeb(value, hdev->regs + reg_id);
+}
+
+static inline u32 hdmi_read(struct hdmi_device *hdev, u32 reg_id)
+{
+	return readl(hdev->regs + reg_id);
+}
+
+static irqreturn_t hdmi_irq_handler(int irq, void *dev_data)
+{
+	struct hdmi_device *hdev = dev_data;
+	u32 intc_flag;
+
+	(void)irq;
+	intc_flag = hdmi_read(hdev, HDMI_INTC_FLAG);
+	/* clearing flags for HPD plug/unplug */
+	if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) {
+		printk(KERN_INFO "unplugged\n");
+		hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0,
+			HDMI_INTC_FLAG_HPD_UNPLUG);
+	}
+	if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) {
+		printk(KERN_INFO "plugged\n");
+		hdmi_write_mask(hdev, HDMI_INTC_FLAG, ~0,
+			HDMI_INTC_FLAG_HPD_PLUG);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void hdmi_reg_init(struct hdmi_device *hdev)
+{
+	/* enable HPD interrupts */
+	hdmi_write_mask(hdev, HDMI_INTC_CON, ~0, HDMI_INTC_EN_GLOBAL |
+		HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
+	/* choose HDMI mode */
+	hdmi_write_mask(hdev, HDMI_MODE_SEL,
+		HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
+	/* disable bluescreen */
+	hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
+	/* choose bluescreen (fecal) color */
+	hdmi_writeb(hdev, HDMI_BLUE_SCREEN_0, 0x12);
+	hdmi_writeb(hdev, HDMI_BLUE_SCREEN_1, 0x34);
+	hdmi_writeb(hdev, HDMI_BLUE_SCREEN_2, 0x56);
+	/* enable AVI packet every vsync, fixes purple line problem */
+	hdmi_writeb(hdev, HDMI_AVI_CON, 0x02);
+	/* force YUV444, look to CEA-861-D, table 7 for more detail */
+	hdmi_writeb(hdev, HDMI_AVI_BYTE(0), 2 << 5);
+	hdmi_write_mask(hdev, HDMI_CON_1, 2, 3 << 5);
+}
+
+static void hdmi_timing_apply(struct hdmi_device *hdev,
+	const struct hdmi_preset_conf *conf)
+{
+	const struct hdmi_core_regs *core = &conf->core;
+	const struct hdmi_tg_regs *tg = &conf->tg;
+
+	/* setting core registers */
+	hdmi_writeb(hdev, HDMI_H_BLANK_0, core->h_blank[0]);
+	hdmi_writeb(hdev, HDMI_H_BLANK_1, core->h_blank[1]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_0, core->v_blank[0]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_1, core->v_blank[1]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_2, core->v_blank[2]);
+	hdmi_writeb(hdev, HDMI_H_V_LINE_0, core->h_v_line[0]);
+	hdmi_writeb(hdev, HDMI_H_V_LINE_1, core->h_v_line[1]);
+	hdmi_writeb(hdev, HDMI_H_V_LINE_2, core->h_v_line[2]);
+	hdmi_writeb(hdev, HDMI_VSYNC_POL, core->vsync_pol[0]);
+	hdmi_writeb(hdev, HDMI_INT_PRO_MODE, core->int_pro_mode[0]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_F_0, core->v_blank_f[0]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_F_1, core->v_blank_f[1]);
+	hdmi_writeb(hdev, HDMI_V_BLANK_F_2, core->v_blank_f[2]);
+	hdmi_writeb(hdev, HDMI_H_SYNC_GEN_0, core->h_sync_gen[0]);
+	hdmi_writeb(hdev, HDMI_H_SYNC_GEN_1, core->h_sync_gen[1]);
+	hdmi_writeb(hdev, HDMI_H_SYNC_GEN_2, core->h_sync_gen[2]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_0, core->v_sync_gen1[0]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_1, core->v_sync_gen1[1]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_1_2, core->v_sync_gen1[2]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_0, core->v_sync_gen2[0]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_1, core->v_sync_gen2[1]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_2_2, core->v_sync_gen2[2]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_0, core->v_sync_gen3[0]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_1, core->v_sync_gen3[1]);
+	hdmi_writeb(hdev, HDMI_V_SYNC_GEN_3_2, core->v_sync_gen3[2]);
+	/* Timing generator registers */
+	hdmi_writeb(hdev, HDMI_TG_H_FSZ_L, tg->h_fsz_l);
+	hdmi_writeb(hdev, HDMI_TG_H_FSZ_H, tg->h_fsz_h);
+	hdmi_writeb(hdev, HDMI_TG_HACT_ST_L, tg->hact_st_l);
+	hdmi_writeb(hdev, HDMI_TG_HACT_ST_H, tg->hact_st_h);
+	hdmi_writeb(hdev, HDMI_TG_HACT_SZ_L, tg->hact_sz_l);
+	hdmi_writeb(hdev, HDMI_TG_HACT_SZ_H, tg->hact_sz_h);
+	hdmi_writeb(hdev, HDMI_TG_V_FSZ_L, tg->v_fsz_l);
+	hdmi_writeb(hdev, HDMI_TG_V_FSZ_H, tg->v_fsz_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_L, tg->vsync_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_H, tg->vsync_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC2_L, tg->vsync2_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC2_H, tg->vsync2_h);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST_L, tg->vact_st_l);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST_H, tg->vact_st_h);
+	hdmi_writeb(hdev, HDMI_TG_VACT_SZ_L, tg->vact_sz_l);
+	hdmi_writeb(hdev, HDMI_TG_VACT_SZ_H, tg->vact_sz_h);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_CHG_L, tg->field_chg_l);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_CHG_H, tg->field_chg_h);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST2_L, tg->vact_st2_l);
+	hdmi_writeb(hdev, HDMI_TG_VACT_ST2_H, tg->vact_st2_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_TOP_HDMI_L, tg->vsync_top_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_TOP_HDMI_H, tg->vsync_top_hdmi_h);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_BOT_HDMI_L, tg->vsync_bot_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_VSYNC_BOT_HDMI_H, tg->vsync_bot_hdmi_h);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_TOP_HDMI_L, tg->field_top_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_TOP_HDMI_H, tg->field_top_hdmi_h);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_BOT_HDMI_L, tg->field_bot_hdmi_l);
+	hdmi_writeb(hdev, HDMI_TG_FIELD_BOT_HDMI_H, tg->field_bot_hdmi_h);
+}
+
+static int hdmi_conf_apply(struct hdmi_device *hdmi_dev)
+{
+	struct device *dev = hdmi_dev->dev;
+	const struct hdmi_preset_conf *conf = hdmi_dev->cur_conf;
+	struct v4l2_dv_preset preset;
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	/* reset hdmiphy */
+	hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT, ~0, HDMI_PHY_SW_RSTOUT);
+	mdelay(10);
+	hdmi_write_mask(hdmi_dev, HDMI_PHY_RSTOUT,  0, HDMI_PHY_SW_RSTOUT);
+	mdelay(10);
+
+	/* configure presets */
+	preset.preset = hdmi_dev->cur_preset;
+	ret = v4l2_subdev_call(hdmi_dev->phy_sd, video, s_dv_preset, &preset);
+	if (ret) {
+		dev_err(dev, "failed to set preset (%u)\n", preset.preset);
+		return ret;
+	}
+
+	/* resetting HDMI core */
+	hdmi_write_mask(hdmi_dev, HDMI_CORE_RSTOUT,  0, HDMI_CORE_SW_RSTOUT);
+	mdelay(10);
+	hdmi_write_mask(hdmi_dev, HDMI_CORE_RSTOUT, ~0, HDMI_CORE_SW_RSTOUT);
+	mdelay(10);
+
+	hdmi_reg_init(hdmi_dev);
+
+	/* setting core registers */
+	hdmi_timing_apply(hdmi_dev, conf);
+
+	return 0;
+}
+
+static void hdmi_dumpregs(struct hdmi_device *hdev, char *prefix)
+{
+#define DUMPREG(reg_id) \
+	dev_dbg(hdev->dev, "%s:" #reg_id " = %08x\n", prefix, \
+		readl(hdev->regs + reg_id))
+
+	dev_dbg(hdev->dev, "%s: ---- CONTROL REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_INTC_FLAG);
+	DUMPREG(HDMI_INTC_CON);
+	DUMPREG(HDMI_HPD_STATUS);
+	DUMPREG(HDMI_PHY_RSTOUT);
+	DUMPREG(HDMI_PHY_VPLL);
+	DUMPREG(HDMI_PHY_CMU);
+	DUMPREG(HDMI_CORE_RSTOUT);
+
+	dev_dbg(hdev->dev, "%s: ---- CORE REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_CON_0);
+	DUMPREG(HDMI_CON_1);
+	DUMPREG(HDMI_CON_2);
+	DUMPREG(HDMI_SYS_STATUS);
+	DUMPREG(HDMI_PHY_STATUS);
+	DUMPREG(HDMI_STATUS_EN);
+	DUMPREG(HDMI_HPD);
+	DUMPREG(HDMI_MODE_SEL);
+	DUMPREG(HDMI_HPD_GEN);
+	DUMPREG(HDMI_DC_CONTROL);
+	DUMPREG(HDMI_VIDEO_PATTERN_GEN);
+
+	dev_dbg(hdev->dev, "%s: ---- CORE SYNC REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_H_BLANK_0);
+	DUMPREG(HDMI_H_BLANK_1);
+	DUMPREG(HDMI_V_BLANK_0);
+	DUMPREG(HDMI_V_BLANK_1);
+	DUMPREG(HDMI_V_BLANK_2);
+	DUMPREG(HDMI_H_V_LINE_0);
+	DUMPREG(HDMI_H_V_LINE_1);
+	DUMPREG(HDMI_H_V_LINE_2);
+	DUMPREG(HDMI_VSYNC_POL);
+	DUMPREG(HDMI_INT_PRO_MODE);
+	DUMPREG(HDMI_V_BLANK_F_0);
+	DUMPREG(HDMI_V_BLANK_F_1);
+	DUMPREG(HDMI_V_BLANK_F_2);
+	DUMPREG(HDMI_H_SYNC_GEN_0);
+	DUMPREG(HDMI_H_SYNC_GEN_1);
+	DUMPREG(HDMI_H_SYNC_GEN_2);
+	DUMPREG(HDMI_V_SYNC_GEN_1_0);
+	DUMPREG(HDMI_V_SYNC_GEN_1_1);
+	DUMPREG(HDMI_V_SYNC_GEN_1_2);
+	DUMPREG(HDMI_V_SYNC_GEN_2_0);
+	DUMPREG(HDMI_V_SYNC_GEN_2_1);
+	DUMPREG(HDMI_V_SYNC_GEN_2_2);
+	DUMPREG(HDMI_V_SYNC_GEN_3_0);
+	DUMPREG(HDMI_V_SYNC_GEN_3_1);
+	DUMPREG(HDMI_V_SYNC_GEN_3_2);
+
+	dev_dbg(hdev->dev, "%s: ---- TG REGISTERS ----\n", prefix);
+	DUMPREG(HDMI_TG_CMD);
+	DUMPREG(HDMI_TG_H_FSZ_L);
+	DUMPREG(HDMI_TG_H_FSZ_H);
+	DUMPREG(HDMI_TG_HACT_ST_L);
+	DUMPREG(HDMI_TG_HACT_ST_H);
+	DUMPREG(HDMI_TG_HACT_SZ_L);
+	DUMPREG(HDMI_TG_HACT_SZ_H);
+	DUMPREG(HDMI_TG_V_FSZ_L);
+	DUMPREG(HDMI_TG_V_FSZ_H);
+	DUMPREG(HDMI_TG_VSYNC_L);
+	DUMPREG(HDMI_TG_VSYNC_H);
+	DUMPREG(HDMI_TG_VSYNC2_L);
+	DUMPREG(HDMI_TG_VSYNC2_H);
+	DUMPREG(HDMI_TG_VACT_ST_L);
+	DUMPREG(HDMI_TG_VACT_ST_H);
+	DUMPREG(HDMI_TG_VACT_SZ_L);
+	DUMPREG(HDMI_TG_VACT_SZ_H);
+	DUMPREG(HDMI_TG_FIELD_CHG_L);
+	DUMPREG(HDMI_TG_FIELD_CHG_H);
+	DUMPREG(HDMI_TG_VACT_ST2_L);
+	DUMPREG(HDMI_TG_VACT_ST2_H);
+	DUMPREG(HDMI_TG_VSYNC_TOP_HDMI_L);
+	DUMPREG(HDMI_TG_VSYNC_TOP_HDMI_H);
+	DUMPREG(HDMI_TG_VSYNC_BOT_HDMI_L);
+	DUMPREG(HDMI_TG_VSYNC_BOT_HDMI_H);
+	DUMPREG(HDMI_TG_FIELD_TOP_HDMI_L);
+	DUMPREG(HDMI_TG_FIELD_TOP_HDMI_H);
+	DUMPREG(HDMI_TG_FIELD_BOT_HDMI_L);
+	DUMPREG(HDMI_TG_FIELD_BOT_HDMI_H);
+#undef DUMPREG
+}
+
+static const struct hdmi_preset_conf hdmi_conf_480p = {
+	.core = {
+		.h_blank = {0x8a, 0x00},
+		.v_blank = {0x0d, 0x6a, 0x01},
+		.h_v_line = {0x0d, 0xa2, 0x35},
+		.vsync_pol = {0x01},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00},
+		.h_sync_gen = {0x0e, 0x30, 0x11},
+		.v_sync_gen1 = {0x0f, 0x90, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x5a, 0x03, /* h_fsz */
+		0x8a, 0x00, 0xd0, 0x02, /* hact */
+		0x0d, 0x02, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x2d, 0x00, 0xe0, 0x01, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x49, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x33, 0x02, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 720,
+		.height = 480,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct hdmi_preset_conf hdmi_conf_720p60 = {
+	.core = {
+		.h_blank = {0x72, 0x01},
+		.v_blank = {0xee, 0xf2, 0x00},
+		.h_v_line = {0xee, 0x22, 0x67},
+		.vsync_pol = {0x00},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00}, /* don't care */
+		.h_sync_gen = {0x6c, 0x50, 0x02},
+		.v_sync_gen1 = {0x0a, 0x50, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x72, 0x06, /* h_fsz */
+		0x72, 0x01, 0x00, 0x05, /* hact */
+		0xee, 0x02, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x1e, 0x00, 0xd0, 0x02, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x49, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x33, 0x02, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 1280,
+		.height = 720,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct hdmi_preset_conf hdmi_conf_1080p50 = {
+	.core = {
+		.h_blank = {0xd0, 0x02},
+		.v_blank = {0x65, 0x6c, 0x01},
+		.h_v_line = {0x65, 0x04, 0xa5},
+		.vsync_pol = {0x00},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00}, /* don't care */
+		.h_sync_gen = {0x0e, 0xea, 0x08},
+		.v_sync_gen1 = {0x09, 0x40, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x98, 0x08, /* h_fsz */
+		0x18, 0x01, 0x80, 0x07, /* hact */
+		0x65, 0x04, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x2d, 0x00, 0x38, 0x04, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x49, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x33, 0x02, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 1920,
+		.height = 1080,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct hdmi_preset_conf hdmi_conf_1080p60 = {
+	.core = {
+		.h_blank = {0x18, 0x01},
+		.v_blank = {0x65, 0x6c, 0x01},
+		.h_v_line = {0x65, 0x84, 0x89},
+		.vsync_pol = {0x00},
+		.int_pro_mode = {0x00},
+		.v_blank_f = {0x00, 0x00, 0x00}, /* don't care */
+		.h_sync_gen = {0x56, 0x08, 0x02},
+		.v_sync_gen1 = {0x09, 0x40, 0x00},
+		/* other don't care */
+	},
+	.tg = {
+		0x00, /* cmd */
+		0x98, 0x08, /* h_fsz */
+		0x18, 0x01, 0x80, 0x07, /* hact */
+		0x65, 0x04, /* v_fsz */
+		0x01, 0x00, 0x33, 0x02, /* vsync */
+		0x2d, 0x00, 0x38, 0x04, /* vact */
+		0x33, 0x02, /* field_chg */
+		0x48, 0x02, /* vact_st2 */
+		0x01, 0x00, 0x01, 0x00, /* vsync top/bot */
+		0x01, 0x00, 0x33, 0x02, /* field top/bot */
+	},
+	.mbus_fmt = {
+		.width = 1920,
+		.height = 1080,
+		.code = V4L2_MBUS_FMT_FIXED, /* means RGB888 */
+		.field = V4L2_FIELD_NONE,
+	},
+};
+
+static const struct {
+	u32 preset;
+	const struct hdmi_preset_conf *conf;
+} hdmi_conf[] = {
+	{ V4L2_DV_480P59_94, &hdmi_conf_480p },
+	{ V4L2_DV_720P59_94, &hdmi_conf_720p60 },
+	{ V4L2_DV_1080P50, &hdmi_conf_1080p50 },
+	{ V4L2_DV_1080P30, &hdmi_conf_1080p60 },
+	{ V4L2_DV_1080P60, &hdmi_conf_1080p60 },
+};
+
+static const struct hdmi_preset_conf *hdmi_preset2conf(u32 preset)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hdmi_conf); ++i)
+		if (hdmi_conf[i].preset == preset)
+			return  hdmi_conf[i].conf;
+	return NULL;
+}
+
+static int hdmi_streamon(struct hdmi_device *hdev)
+{
+	struct device *dev = hdev->dev;
+	struct hdmi_resources *res = &hdev->res;
+	int ret, tries;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = v4l2_subdev_call(hdev->phy_sd, video, s_stream, 1);
+	if (ret)
+		return ret;
+
+	/* waiting for HDMIPHY's PLL to get to steady state */
+	for (tries = 100; tries; --tries) {
+		u32 val = hdmi_read(hdev, HDMI_PHY_STATUS);
+		if (val & HDMI_PHY_STATUS_READY)
+			break;
+		mdelay(1);
+	}
+	/* steady state not achieved */
+	if (tries == 0) {
+		dev_err(dev, "hdmiphy's pll could not reach steady state.\n");
+		v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0);
+		hdmi_dumpregs(hdev, "s_stream");
+		return -EIO;
+	}
+
+	/* hdmiphy clock is used for HDMI in streaming mode */
+	clk_disable(res->sclk_hdmi);
+	clk_set_parent(res->sclk_hdmi, res->sclk_hdmiphy);
+	clk_enable(res->sclk_hdmi);
+
+	/* enable HDMI and timing generator */
+	hdmi_write_mask(hdev, HDMI_CON_0, ~0, HDMI_EN);
+	hdmi_write_mask(hdev, HDMI_TG_CMD, ~0, HDMI_TG_EN);
+	hdmi_dumpregs(hdev, "streamon");
+	return 0;
+}
+
+static int hdmi_streamoff(struct hdmi_device *hdev)
+{
+	struct device *dev = hdev->dev;
+	struct hdmi_resources *res = &hdev->res;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	hdmi_write_mask(hdev, HDMI_CON_0, 0, HDMI_EN);
+	hdmi_write_mask(hdev, HDMI_TG_CMD, 0, HDMI_TG_EN);
+
+	/* pixel(vpll) clock is used for HDMI in config mode */
+	clk_disable(res->sclk_hdmi);
+	clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
+	clk_enable(res->sclk_hdmi);
+
+	v4l2_subdev_call(hdev->phy_sd, video, s_stream, 0);
+
+	hdmi_dumpregs(hdev, "streamoff");
+	return 0;
+}
+
+static int hdmi_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	struct device *dev = hdev->dev;
+
+	dev_dbg(dev, "%s(%d)\n", __func__, enable);
+	if (enable)
+		return hdmi_streamon(hdev);
+	return hdmi_streamoff(hdev);
+}
+
+static void hdmi_resource_poweron(struct hdmi_resources *res)
+{
+	/* turn HDMI power on */
+	regulator_bulk_enable(res->regul_count, res->regul_bulk);
+	/* power-on hdmi physical interface */
+	clk_enable(res->hdmiphy);
+	/* use VPP as parent clock; HDMIPHY is not working yet */
+	clk_set_parent(res->sclk_hdmi, res->sclk_pixel);
+	/* turn clocks on */
+	clk_enable(res->sclk_hdmi);
+}
+
+static void hdmi_resource_poweroff(struct hdmi_resources *res)
+{
+	/* turn clocks off */
+	clk_disable(res->sclk_hdmi);
+	/* power-off hdmiphy */
+	clk_disable(res->hdmiphy);
+	/* turn HDMI power off */
+	regulator_bulk_disable(res->regul_count, res->regul_bulk);
+}
+
+static int hdmi_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(hdev->dev);
+	else
+		ret = pm_runtime_put_sync(hdev->dev);
+	/* only values < 0 indicate errors */
+	return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int hdmi_s_dv_preset(struct v4l2_subdev *sd,
+	struct v4l2_dv_preset *preset)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	struct device *dev = hdev->dev;
+	const struct hdmi_preset_conf *conf;
+
+	conf = hdmi_preset2conf(preset->preset);
+	if (conf == NULL) {
+		dev_err(dev, "preset (%u) not supported\n", preset->preset);
+		return -EINVAL;
+	}
+	hdev->cur_conf = conf;
+	hdev->cur_preset = preset->preset;
+	return 0;
+}
+
+static int hdmi_g_dv_preset(struct v4l2_subdev *sd,
+	struct v4l2_dv_preset *preset)
+{
+	memset(preset, 0, sizeof(*preset));
+	preset->preset = sd_to_hdmi_dev(sd)->cur_preset;
+	return 0;
+}
+
+static int hdmi_g_mbus_fmt(struct v4l2_subdev *sd,
+	  struct v4l2_mbus_framefmt *fmt)
+{
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	struct device *dev = hdev->dev;
+
+	dev_dbg(dev, "%s\n", __func__);
+	if (!hdev->cur_conf)
+		return -EINVAL;
+	*fmt = hdev->cur_conf->mbus_fmt;
+	return 0;
+}
+
+static int hdmi_enum_dv_presets(struct v4l2_subdev *sd,
+	struct v4l2_dv_enum_preset *preset)
+{
+	if (preset->index >= ARRAY_SIZE(hdmi_conf))
+		return -EINVAL;
+	return v4l_fill_dv_preset_info(hdmi_conf[preset->index].preset, preset);
+}
+
+static const struct v4l2_subdev_core_ops hdmi_sd_core_ops = {
+	.s_power = hdmi_s_power,
+};
+
+static const struct v4l2_subdev_video_ops hdmi_sd_video_ops = {
+	.s_dv_preset = hdmi_s_dv_preset,
+	.g_dv_preset = hdmi_g_dv_preset,
+	.enum_dv_presets = hdmi_enum_dv_presets,
+	.g_mbus_fmt = hdmi_g_mbus_fmt,
+	.s_stream = hdmi_s_stream,
+};
+
+static const struct v4l2_subdev_ops hdmi_sd_ops = {
+	.core = &hdmi_sd_core_ops,
+	.video = &hdmi_sd_video_ops,
+};
+
+static int hdmi_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+
+	dev_dbg(dev, "%s\n", __func__);
+	hdmi_resource_poweroff(&hdev->res);
+	return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct hdmi_device *hdev = sd_to_hdmi_dev(sd);
+	int ret = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	hdmi_resource_poweron(&hdev->res);
+
+	ret = hdmi_conf_apply(hdev);
+	if (ret)
+		goto fail;
+
+	dev_dbg(dev, "poweron succeed\n");
+
+	return 0;
+
+fail:
+	hdmi_resource_poweroff(&hdev->res);
+	dev_err(dev, "poweron failed\n");
+
+	return ret;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+	.runtime_suspend = hdmi_runtime_suspend,
+	.runtime_resume	 = hdmi_runtime_resume,
+};
+
+static void hdmi_resources_cleanup(struct hdmi_device *hdev)
+{
+	struct hdmi_resources *res = &hdev->res;
+
+	dev_dbg(hdev->dev, "HDMI resource cleanup\n");
+	/* put clocks, power */
+	if (res->regul_count)
+		regulator_bulk_free(res->regul_count, res->regul_bulk);
+	/* kfree is NULL-safe */
+	kfree(res->regul_bulk);
+	if (!IS_ERR_OR_NULL(res->hdmiphy))
+		clk_put(res->hdmiphy);
+	if (!IS_ERR_OR_NULL(res->sclk_hdmiphy))
+		clk_put(res->sclk_hdmiphy);
+	if (!IS_ERR_OR_NULL(res->sclk_pixel))
+		clk_put(res->sclk_pixel);
+	if (!IS_ERR_OR_NULL(res->sclk_hdmi))
+		clk_put(res->sclk_hdmi);
+	if (!IS_ERR_OR_NULL(res->hdmi))
+		clk_put(res->hdmi);
+	memset(res, 0, sizeof *res);
+}
+
+static int hdmi_resources_init(struct hdmi_device *hdev)
+{
+	struct device *dev = hdev->dev;
+	struct hdmi_resources *res = &hdev->res;
+	static char *supply[] = {
+		"hdmi-en",
+		"vdd",
+		"vdd_osc",
+		"vdd_pll",
+	};
+	int i, ret;
+
+	dev_dbg(dev, "HDMI resource init\n");
+
+	memset(res, 0, sizeof *res);
+	/* get clocks, power */
+
+	res->hdmi = clk_get(dev, "hdmi");
+	if (IS_ERR_OR_NULL(res->hdmi)) {
+		dev_err(dev, "failed to get clock 'hdmi'\n");
+		goto fail;
+	}
+	res->sclk_hdmi = clk_get(dev, "sclk_hdmi");
+	if (IS_ERR_OR_NULL(res->sclk_hdmi)) {
+		dev_err(dev, "failed to get clock 'sclk_hdmi'\n");
+		goto fail;
+	}
+	res->sclk_pixel = clk_get(dev, "sclk_pixel");
+	if (IS_ERR_OR_NULL(res->sclk_pixel)) {
+		dev_err(dev, "failed to get clock 'sclk_pixel'\n");
+		goto fail;
+	}
+	res->sclk_hdmiphy = clk_get(dev, "sclk_hdmiphy");
+	if (IS_ERR_OR_NULL(res->sclk_hdmiphy)) {
+		dev_err(dev, "failed to get clock 'sclk_hdmiphy'\n");
+		goto fail;
+	}
+	res->hdmiphy = clk_get(dev, "hdmiphy");
+	if (IS_ERR_OR_NULL(res->hdmiphy)) {
+		dev_err(dev, "failed to get clock 'hdmiphy'\n");
+		goto fail;
+	}
+	res->regul_bulk = kzalloc(ARRAY_SIZE(supply) *
+		sizeof res->regul_bulk[0], GFP_KERNEL);
+	if (!res->regul_bulk) {
+		dev_err(dev, "failed to get memory for regulators\n");
+		goto fail;
+	}
+	for (i = 0; i < ARRAY_SIZE(supply); ++i) {
+		res->regul_bulk[i].supply = supply[i];
+		res->regul_bulk[i].consumer = NULL;
+	}
+
+	ret = regulator_bulk_get(dev, ARRAY_SIZE(supply), res->regul_bulk);
+	if (ret) {
+		dev_err(dev, "failed to get regulators\n");
+		goto fail;
+	}
+	res->regul_count = ARRAY_SIZE(supply);
+
+	return 0;
+fail:
+	dev_err(dev, "HDMI resource init - failed\n");
+	hdmi_resources_cleanup(hdev);
+	return -ENODEV;
+}
+
+static int __devinit hdmi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct i2c_adapter *phy_adapter;
+	struct v4l2_subdev *sd;
+	struct hdmi_device *hdmi_dev = NULL;
+	struct hdmi_driver_data *drv_data;
+	int ret;
+
+	dev_dbg(dev, "probe start\n");
+
+	hdmi_dev = kzalloc(sizeof(*hdmi_dev), GFP_KERNEL);
+	if (!hdmi_dev) {
+		dev_err(dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	hdmi_dev->dev = dev;
+
+	ret = hdmi_resources_init(hdmi_dev);
+	if (ret)
+		goto fail_hdev;
+
+	/* mapping HDMI registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_init;
+	}
+
+	hdmi_dev->regs = ioremap(res->start, resource_size(res));
+	if (hdmi_dev->regs == NULL) {
+		dev_err(dev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_hdev;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(dev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_regs;
+	}
+
+	ret = request_irq(res->start, hdmi_irq_handler, 0, "hdmi", hdmi_dev);
+	if (ret) {
+		dev_err(dev, "request interrupt failed.\n");
+		goto fail_regs;
+	}
+	hdmi_dev->irq = res->start;
+
+	/* setting v4l2 name to prevent WARN_ON in v4l2_device_register */
+	strlcpy(hdmi_dev->v4l2_dev.name, dev_name(dev),
+		sizeof(hdmi_dev->v4l2_dev.name));
+	/* passing NULL owner prevents driver from erasing drvdata */
+	ret = v4l2_device_register(NULL, &hdmi_dev->v4l2_dev);
+	if (ret) {
+		dev_err(dev, "could not register v4l2 device.\n");
+		goto fail_irq;
+	}
+
+	drv_data = (struct hdmi_driver_data *)
+		platform_get_device_id(pdev)->driver_data;
+	phy_adapter = i2c_get_adapter(drv_data->hdmiphy_bus);
+	if (phy_adapter == NULL) {
+		dev_err(dev, "adapter request failed\n");
+		ret = -ENXIO;
+		goto fail_vdev;
+	}
+
+	hdmi_dev->phy_sd = v4l2_i2c_new_subdev_board(&hdmi_dev->v4l2_dev,
+		phy_adapter, &hdmiphy_info, NULL);
+	/* on failure or not adapter is no longer useful */
+	i2c_put_adapter(phy_adapter);
+	if (hdmi_dev->phy_sd == NULL) {
+		dev_err(dev, "missing subdev for hdmiphy\n");
+		ret = -ENODEV;
+		goto fail_vdev;
+	}
+
+	clk_enable(hdmi_dev->res.hdmi);
+
+	pm_runtime_enable(dev);
+
+	sd = &hdmi_dev->sd;
+	v4l2_subdev_init(sd, &hdmi_sd_ops);
+	sd->owner = THIS_MODULE;
+
+	strlcpy(sd->name, "s5p-hdmi", sizeof sd->name);
+	hdmi_dev->cur_preset = HDMI_DEFAULT_PRESET;
+	/* FIXME: missing fail preset is not supported */
+	hdmi_dev->cur_conf = hdmi_preset2conf(hdmi_dev->cur_preset);
+
+	/* storing subdev for call that have only access to struct device */
+	dev_set_drvdata(dev, sd);
+
+	dev_info(dev, "probe sucessful\n");
+
+	return 0;
+
+fail_vdev:
+	v4l2_device_unregister(&hdmi_dev->v4l2_dev);
+
+fail_irq:
+	free_irq(hdmi_dev->irq, hdmi_dev);
+
+fail_regs:
+	iounmap(hdmi_dev->regs);
+
+fail_init:
+	hdmi_resources_cleanup(hdmi_dev);
+
+fail_hdev:
+	kfree(hdmi_dev);
+
+fail:
+	dev_err(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit hdmi_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct hdmi_device *hdmi_dev = sd_to_hdmi_dev(sd);
+
+	pm_runtime_disable(dev);
+	clk_disable(hdmi_dev->res.hdmi);
+	v4l2_device_unregister(&hdmi_dev->v4l2_dev);
+	disable_irq(hdmi_dev->irq);
+	free_irq(hdmi_dev->irq, hdmi_dev);
+	iounmap(hdmi_dev->regs);
+	hdmi_resources_cleanup(hdmi_dev);
+	kfree(hdmi_dev);
+	dev_info(dev, "remove sucessful\n");
+
+	return 0;
+}
+
+static struct platform_driver hdmi_driver __refdata = {
+	.probe = hdmi_probe,
+	.remove = __devexit_p(hdmi_remove),
+	.id_table = hdmi_driver_types,
+	.driver = {
+		.name = "s5p-hdmi",
+		.owner = THIS_MODULE,
+		.pm = &hdmi_pm_ops,
+	}
+};
+
+/* D R I V E R   I N I T I A L I Z A T I O N */
+
+static int __init hdmi_init(void)
+{
+	int ret;
+	static const char banner[] __initdata = KERN_INFO \
+		"Samsung HDMI output driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	ret = platform_driver_register(&hdmi_driver);
+	if (ret)
+		printk(KERN_ERR "HDMI platform driver register failed\n");
+
+	return ret;
+}
+module_init(hdmi_init);
+
+static void __exit hdmi_exit(void)
+{
+	platform_driver_unregister(&hdmi_driver);
+}
+module_exit(hdmi_exit);
+
+
diff --git a/drivers/media/video/s5p-tv/hdmiphy_drv.c b/drivers/media/video/s5p-tv/hdmiphy_drv.c
new file mode 100644
index 00000000000..6693f4aff10
--- /dev/null
+++ b/drivers/media/video/s5p-tv/hdmiphy_drv.c
@@ -0,0 +1,188 @@
+/*
+ * Samsung HDMI Physical interface driver
+ *
+ * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
+ * Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+
+#include <media/v4l2-subdev.h>
+
+MODULE_AUTHOR("Tomasz Stanislawski <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung HDMI Physical interface driver");
+MODULE_LICENSE("GPL");
+
+struct hdmiphy_conf {
+	u32 preset;
+	const u8 *data;
+};
+
+static const u8 hdmiphy_conf27[32] = {
+	0x01, 0x05, 0x00, 0xD8, 0x10, 0x1C, 0x30, 0x40,
+	0x6B, 0x10, 0x02, 0x51, 0xDf, 0xF2, 0x54, 0x87,
+	0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
+	0x22, 0x40, 0xe3, 0x26, 0x00, 0x00, 0x00, 0x00,
+};
+
+static const u8 hdmiphy_conf74_175[32] = {
+	0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xef, 0x5B,
+	0x6D, 0x10, 0x01, 0x51, 0xef, 0xF3, 0x54, 0xb9,
+	0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0,
+	0x22, 0x40, 0xa5, 0x26, 0x01, 0x00, 0x00, 0x00,
+};
+
+static const u8 hdmiphy_conf74_25[32] = {
+	0x01, 0x05, 0x00, 0xd8, 0x10, 0x9c, 0xf8, 0x40,
+	0x6a, 0x10, 0x01, 0x51, 0xff, 0xf1, 0x54, 0xba,
+	0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xe0,
+	0x22, 0x40, 0xa4, 0x26, 0x01, 0x00, 0x00, 0x00,
+};
+
+static const u8 hdmiphy_conf148_5[32] = {
+	0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xf8, 0x40,
+	0x6A, 0x18, 0x00, 0x51, 0xff, 0xF1, 0x54, 0xba,
+	0x84, 0x00, 0x10, 0x38, 0x00, 0x08, 0x10, 0xE0,
+	0x22, 0x40, 0xa4, 0x26, 0x02, 0x00, 0x00, 0x00,
+};
+
+static const struct hdmiphy_conf hdmiphy_conf[] = {
+	{ V4L2_DV_480P59_94, hdmiphy_conf27 },
+	{ V4L2_DV_1080P30, hdmiphy_conf74_175 },
+	{ V4L2_DV_720P59_94, hdmiphy_conf74_175 },
+	{ V4L2_DV_720P60, hdmiphy_conf74_25 },
+	{ V4L2_DV_1080P50, hdmiphy_conf148_5 },
+	{ V4L2_DV_1080P60, hdmiphy_conf148_5 },
+};
+
+const u8 *hdmiphy_preset2conf(u32 preset)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(hdmiphy_conf); ++i)
+		if (hdmiphy_conf[i].preset == preset)
+			return hdmiphy_conf[i].data;
+	return NULL;
+}
+
+static int hdmiphy_s_power(struct v4l2_subdev *sd, int on)
+{
+	/* to be implemented */
+	return 0;
+}
+
+static int hdmiphy_s_dv_preset(struct v4l2_subdev *sd,
+	struct v4l2_dv_preset *preset)
+{
+	const u8 *data;
+	u8 buffer[32];
+	int ret;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct device *dev = &client->dev;
+
+	dev_info(dev, "s_dv_preset(preset = %d)\n", preset->preset);
+	data = hdmiphy_preset2conf(preset->preset);
+	if (!data) {
+		dev_err(dev, "format not supported\n");
+		return -EINVAL;
+	}
+
+	/* storing configuration to the device */
+	memcpy(buffer, data, 32);
+	ret = i2c_master_send(client, buffer, 32);
+	if (ret != 32) {
+		dev_err(dev, "failed to configure HDMIPHY via I2C\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int hdmiphy_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct device *dev = &client->dev;
+	u8 buffer[2];
+	int ret;
+
+	dev_info(dev, "s_stream(%d)\n", enable);
+	/* going to/from configuration from/to operation mode */
+	buffer[0] = 0x1f;
+	buffer[1] = enable ? 0x80 : 0x00;
+
+	ret = i2c_master_send(client, buffer, 2);
+	if (ret != 2) {
+		dev_err(dev, "stream (%d) failed\n", enable);
+		return -EIO;
+	}
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops hdmiphy_core_ops = {
+	.s_power =  hdmiphy_s_power,
+};
+
+static const struct v4l2_subdev_video_ops hdmiphy_video_ops = {
+	.s_dv_preset = hdmiphy_s_dv_preset,
+	.s_stream =  hdmiphy_s_stream,
+};
+
+static const struct v4l2_subdev_ops hdmiphy_ops = {
+	.core = &hdmiphy_core_ops,
+	.video = &hdmiphy_video_ops,
+};
+
+static int __devinit hdmiphy_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	static struct v4l2_subdev sd;
+
+	v4l2_i2c_subdev_init(&sd, client, &hdmiphy_ops);
+	dev_info(&client->dev, "probe successful\n");
+	return 0;
+}
+
+static int __devexit hdmiphy_remove(struct i2c_client *client)
+{
+	dev_info(&client->dev, "remove successful\n");
+	return 0;
+}
+
+static const struct i2c_device_id hdmiphy_id[] = {
+	{ "hdmiphy", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, hdmiphy_id);
+
+static struct i2c_driver hdmiphy_driver = {
+	.driver = {
+		.name	= "s5p-hdmiphy",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= hdmiphy_probe,
+	.remove		= __devexit_p(hdmiphy_remove),
+	.id_table = hdmiphy_id,
+};
+
+static int __init hdmiphy_init(void)
+{
+	return i2c_add_driver(&hdmiphy_driver);
+}
+module_init(hdmiphy_init);
+
+static void __exit hdmiphy_exit(void)
+{
+	i2c_del_driver(&hdmiphy_driver);
+}
+module_exit(hdmiphy_exit);
diff --git a/drivers/media/video/s5p-tv/mixer.h b/drivers/media/video/s5p-tv/mixer.h
new file mode 100644
index 00000000000..e2242243f63
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer.h
@@ -0,0 +1,354 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#ifndef SAMSUNG_MIXER_H
+#define SAMSUNG_MIXER_H
+
+#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG
+	#define DEBUG
+#endif
+
+#include <linux/fb.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-core.h>
+
+#include "regs-mixer.h"
+
+/** maximum number of output interfaces */
+#define MXR_MAX_OUTPUTS 2
+/** maximum number of input interfaces (layers) */
+#define MXR_MAX_LAYERS 3
+#define MXR_DRIVER_NAME "s5p-mixer"
+/** maximal number of planes for every layer */
+#define MXR_MAX_PLANES	2
+
+#define MXR_ENABLE 1
+#define MXR_DISABLE 0
+
+/** description of a macroblock for packed formats */
+struct mxr_block {
+	/** vertical number of pixels in macroblock */
+	unsigned int width;
+	/** horizontal number of pixels in macroblock */
+	unsigned int height;
+	/** size of block in bytes */
+	unsigned int size;
+};
+
+/** description of supported format */
+struct mxr_format {
+	/** format name/mnemonic */
+	const char *name;
+	/** fourcc identifier */
+	u32 fourcc;
+	/** colorspace identifier */
+	enum v4l2_colorspace colorspace;
+	/** number of planes in image data */
+	int num_planes;
+	/** description of block for each plane */
+	struct mxr_block plane[MXR_MAX_PLANES];
+	/** number of subframes in image data */
+	int num_subframes;
+	/** specifies to which subframe belong given plane */
+	int plane2subframe[MXR_MAX_PLANES];
+	/** internal code, driver dependant */
+	unsigned long cookie;
+};
+
+/** description of crop configuration for image */
+struct mxr_crop {
+	/** width of layer in pixels */
+	unsigned int full_width;
+	/** height of layer in pixels */
+	unsigned int full_height;
+	/** horizontal offset of first pixel to be displayed */
+	unsigned int x_offset;
+	/** vertical offset of first pixel to be displayed */
+	unsigned int y_offset;
+	/** width of displayed data in pixels */
+	unsigned int width;
+	/** height of displayed data in pixels */
+	unsigned int height;
+	/** indicate which fields are present in buffer */
+	unsigned int field;
+};
+
+/** description of transformation from source to destination image */
+struct mxr_geometry {
+	/** cropping for source image */
+	struct mxr_crop src;
+	/** cropping for destination image */
+	struct mxr_crop dst;
+	/** layer-dependant description of horizontal scaling */
+	unsigned int x_ratio;
+	/** layer-dependant description of vertical scaling */
+	unsigned int y_ratio;
+};
+
+/** instance of a buffer */
+struct mxr_buffer {
+	/** common v4l buffer stuff -- must be first */
+	struct vb2_buffer	vb;
+	/** node for layer's lists */
+	struct list_head	list;
+};
+
+
+/** internal states of layer */
+enum mxr_layer_state {
+	/** layers is not shown */
+	MXR_LAYER_IDLE = 0,
+	/** state between STREAMON and hardware start */
+	MXR_LAYER_STREAMING_START,
+	/** layer is shown */
+	MXR_LAYER_STREAMING,
+	/** state before STREAMOFF is finished */
+	MXR_LAYER_STREAMING_FINISH,
+};
+
+/** forward declarations */
+struct mxr_device;
+struct mxr_layer;
+
+/** callback for layers operation */
+struct mxr_layer_ops {
+	/* TODO: try to port it to subdev API */
+	/** handler for resource release function */
+	void (*release)(struct mxr_layer *);
+	/** setting buffer to HW */
+	void (*buffer_set)(struct mxr_layer *, struct mxr_buffer *);
+	/** setting format and geometry in HW */
+	void (*format_set)(struct mxr_layer *);
+	/** streaming stop/start */
+	void (*stream_set)(struct mxr_layer *, int);
+	/** adjusting geometry */
+	void (*fix_geometry)(struct mxr_layer *);
+};
+
+/** layer instance, a single window and content displayed on output */
+struct mxr_layer {
+	/** parent mixer device */
+	struct mxr_device *mdev;
+	/** layer index (unique identifier) */
+	int idx;
+	/** callbacks for layer methods */
+	struct mxr_layer_ops ops;
+	/** format array */
+	const struct mxr_format **fmt_array;
+	/** size of format array */
+	unsigned long fmt_array_size;
+
+	/** lock for protection of list and state fields */
+	spinlock_t enq_slock;
+	/** list for enqueued buffers */
+	struct list_head enq_list;
+	/** buffer currently owned by hardware in temporary registers */
+	struct mxr_buffer *update_buf;
+	/** buffer currently owned by hardware in shadow registers */
+	struct mxr_buffer *shadow_buf;
+	/** state of layer IDLE/STREAMING */
+	enum mxr_layer_state state;
+
+	/** mutex for protection of fields below */
+	struct mutex mutex;
+	/** handler for video node */
+	struct video_device vfd;
+	/** queue for output buffers */
+	struct vb2_queue vb_queue;
+	/** current image format */
+	const struct mxr_format *fmt;
+	/** current geometry of image */
+	struct mxr_geometry geo;
+};
+
+/** description of mixers output interface */
+struct mxr_output {
+	/** name of output */
+	char name[32];
+	/** output subdev */
+	struct v4l2_subdev *sd;
+	/** cookie used for configuration of registers */
+	int cookie;
+};
+
+/** specify source of output subdevs */
+struct mxr_output_conf {
+	/** name of output (connector) */
+	char *output_name;
+	/** name of module that generates output subdev */
+	char *module_name;
+	/** cookie need for mixer HW */
+	int cookie;
+};
+
+struct clk;
+struct regulator;
+
+/** auxiliary resources used my mixer */
+struct mxr_resources {
+	/** interrupt index */
+	int irq;
+	/** pointer to Mixer registers */
+	void __iomem *mxr_regs;
+	/** pointer to Video Processor registers */
+	void __iomem *vp_regs;
+	/** other resources, should used under mxr_device.mutex */
+	struct clk *mixer;
+	struct clk *vp;
+	struct clk *sclk_mixer;
+	struct clk *sclk_hdmi;
+	struct clk *sclk_dac;
+};
+
+/* event flags used  */
+enum mxr_devide_flags {
+	MXR_EVENT_VSYNC = 0,
+};
+
+/** drivers instance */
+struct mxr_device {
+	/** master device */
+	struct device *dev;
+	/** state of each layer */
+	struct mxr_layer *layer[MXR_MAX_LAYERS];
+	/** state of each output */
+	struct mxr_output *output[MXR_MAX_OUTPUTS];
+	/** number of registered outputs */
+	int output_cnt;
+
+	/* video resources */
+
+	/** V4L2 device */
+	struct v4l2_device v4l2_dev;
+	/** context of allocator */
+	void *alloc_ctx;
+	/** event wait queue */
+	wait_queue_head_t event_queue;
+	/** state flags */
+	unsigned long event_flags;
+
+	/** spinlock for protection of registers */
+	spinlock_t reg_slock;
+
+	/** mutex for protection of fields below */
+	struct mutex mutex;
+	/** number of entities depndant on output configuration */
+	int n_output;
+	/** number of users that do streaming */
+	int n_streamer;
+	/** index of current output */
+	int current_output;
+	/** auxiliary resources used my mixer */
+	struct mxr_resources res;
+};
+
+/** transform device structure into mixer device */
+static inline struct mxr_device *to_mdev(struct device *dev)
+{
+	struct v4l2_device *vdev = dev_get_drvdata(dev);
+	return container_of(vdev, struct mxr_device, v4l2_dev);
+}
+
+/** get current output data, should be called under mdev's mutex */
+static inline struct mxr_output *to_output(struct mxr_device *mdev)
+{
+	return mdev->output[mdev->current_output];
+}
+
+/** get current output subdev, should be called under mdev's mutex */
+static inline struct v4l2_subdev *to_outsd(struct mxr_device *mdev)
+{
+	struct mxr_output *out = to_output(mdev);
+	return out ? out->sd : NULL;
+}
+
+/** forward declaration for mixer platform data */
+struct mxr_platform_data;
+
+/** acquiring common video resources */
+int __devinit mxr_acquire_video(struct mxr_device *mdev,
+	struct mxr_output_conf *output_cont, int output_count);
+
+/** releasing common video resources */
+void __devexit mxr_release_video(struct mxr_device *mdev);
+
+struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx);
+struct mxr_layer *mxr_vp_layer_create(struct mxr_device *mdev, int idx);
+struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev,
+	int idx, char *name, struct mxr_layer_ops *ops);
+
+void mxr_base_layer_release(struct mxr_layer *layer);
+void mxr_layer_release(struct mxr_layer *layer);
+
+int mxr_base_layer_register(struct mxr_layer *layer);
+void mxr_base_layer_unregister(struct mxr_layer *layer);
+
+unsigned long mxr_get_plane_size(const struct mxr_block *blk,
+	unsigned int width, unsigned int height);
+
+/** adds new consumer for mixer's power */
+int __must_check mxr_power_get(struct mxr_device *mdev);
+/** removes consumer for mixer's power */
+void mxr_power_put(struct mxr_device *mdev);
+/** add new client for output configuration */
+void mxr_output_get(struct mxr_device *mdev);
+/** removes new client for output configuration */
+void mxr_output_put(struct mxr_device *mdev);
+/** add new client for streaming */
+void mxr_streamer_get(struct mxr_device *mdev);
+/** removes new client for streaming */
+void mxr_streamer_put(struct mxr_device *mdev);
+/** returns format of data delivared to current output */
+void mxr_get_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *mbus_fmt);
+
+/* Debug */
+
+#define mxr_err(mdev, fmt, ...)  dev_err(mdev->dev, fmt, ##__VA_ARGS__)
+#define mxr_warn(mdev, fmt, ...) dev_warn(mdev->dev, fmt, ##__VA_ARGS__)
+#define mxr_info(mdev, fmt, ...) dev_info(mdev->dev, fmt, ##__VA_ARGS__)
+
+#ifdef CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG
+	#define mxr_dbg(mdev, fmt, ...)  dev_dbg(mdev->dev, fmt, ##__VA_ARGS__)
+#else
+	#define mxr_dbg(mdev, fmt, ...)  do { (void) mdev; } while (0)
+#endif
+
+/* accessing Mixer's and Video Processor's registers */
+
+void mxr_vsync_set_update(struct mxr_device *mdev, int en);
+void mxr_reg_reset(struct mxr_device *mdev);
+irqreturn_t mxr_irq_handler(int irq, void *dev_data);
+void mxr_reg_s_output(struct mxr_device *mdev, int cookie);
+void mxr_reg_streamon(struct mxr_device *mdev);
+void mxr_reg_streamoff(struct mxr_device *mdev);
+int mxr_reg_wait4vsync(struct mxr_device *mdev);
+void mxr_reg_set_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *fmt);
+void mxr_reg_graph_layer_stream(struct mxr_device *mdev, int idx, int en);
+void mxr_reg_graph_buffer(struct mxr_device *mdev, int idx, dma_addr_t addr);
+void mxr_reg_graph_format(struct mxr_device *mdev, int idx,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo);
+
+void mxr_reg_vp_layer_stream(struct mxr_device *mdev, int en);
+void mxr_reg_vp_buffer(struct mxr_device *mdev,
+	dma_addr_t luma_addr[2], dma_addr_t chroma_addr[2]);
+void mxr_reg_vp_format(struct mxr_device *mdev,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo);
+void mxr_reg_dump(struct mxr_device *mdev);
+
+#endif /* SAMSUNG_MIXER_H */
+
diff --git a/drivers/media/video/s5p-tv/mixer_drv.c b/drivers/media/video/s5p-tv/mixer_drv.c
new file mode 100644
index 00000000000..00643094b22
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_drv.c
@@ -0,0 +1,487 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung MIXER");
+MODULE_LICENSE("GPL");
+
+/* --------- DRIVER PARAMETERS ---------- */
+
+static struct mxr_output_conf mxr_output_conf[] = {
+	{
+		.output_name = "S5P HDMI connector",
+		.module_name = "s5p-hdmi",
+		.cookie = 1,
+	},
+	{
+		.output_name = "S5P SDO connector",
+		.module_name = "s5p-sdo",
+		.cookie = 0,
+	},
+};
+
+void mxr_get_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	struct v4l2_subdev *sd;
+	int ret;
+
+	mutex_lock(&mdev->mutex);
+	sd = to_outsd(mdev);
+	ret = v4l2_subdev_call(sd, video, g_mbus_fmt, mbus_fmt);
+	WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name);
+	mutex_unlock(&mdev->mutex);
+}
+
+void mxr_streamer_get(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	++mdev->n_streamer;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer);
+	if (mdev->n_streamer == 1) {
+		struct v4l2_subdev *sd = to_outsd(mdev);
+		struct v4l2_mbus_framefmt mbus_fmt;
+		struct mxr_resources *res = &mdev->res;
+		int ret;
+
+		if (to_output(mdev)->cookie == 0)
+			clk_set_parent(res->sclk_mixer, res->sclk_dac);
+		else
+			clk_set_parent(res->sclk_mixer, res->sclk_hdmi);
+		mxr_reg_s_output(mdev, to_output(mdev)->cookie);
+
+		ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mbus_fmt);
+		WARN(ret, "failed to get mbus_fmt for output %s\n", sd->name);
+		ret = v4l2_subdev_call(sd, video, s_stream, 1);
+		WARN(ret, "starting stream failed for output %s\n", sd->name);
+
+		mxr_reg_set_mbus_fmt(mdev, &mbus_fmt);
+		mxr_reg_streamon(mdev);
+		ret = mxr_reg_wait4vsync(mdev);
+		WARN(ret, "failed to get vsync (%d) from output\n", ret);
+	}
+	mutex_unlock(&mdev->mutex);
+	mxr_reg_dump(mdev);
+	/* FIXME: what to do when streaming fails? */
+}
+
+void mxr_streamer_put(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	--mdev->n_streamer;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_streamer);
+	if (mdev->n_streamer == 0) {
+		int ret;
+		struct v4l2_subdev *sd = to_outsd(mdev);
+
+		mxr_reg_streamoff(mdev);
+		/* vsync applies Mixer setup */
+		ret = mxr_reg_wait4vsync(mdev);
+		WARN(ret, "failed to get vsync (%d) from output\n", ret);
+		ret = v4l2_subdev_call(sd, video, s_stream, 0);
+		WARN(ret, "stopping stream failed for output %s\n", sd->name);
+	}
+	WARN(mdev->n_streamer < 0, "negative number of streamers (%d)\n",
+		mdev->n_streamer);
+	mutex_unlock(&mdev->mutex);
+	mxr_reg_dump(mdev);
+}
+
+void mxr_output_get(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	++mdev->n_output;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_output);
+	/* turn on auxiliary driver */
+	if (mdev->n_output == 1)
+		v4l2_subdev_call(to_outsd(mdev), core, s_power, 1);
+	mutex_unlock(&mdev->mutex);
+}
+
+void mxr_output_put(struct mxr_device *mdev)
+{
+	mutex_lock(&mdev->mutex);
+	--mdev->n_output;
+	mxr_dbg(mdev, "%s(%d)\n", __func__, mdev->n_output);
+	/* turn on auxiliary driver */
+	if (mdev->n_output == 0)
+		v4l2_subdev_call(to_outsd(mdev), core, s_power, 0);
+	WARN(mdev->n_output < 0, "negative number of output users (%d)\n",
+		mdev->n_output);
+	mutex_unlock(&mdev->mutex);
+}
+
+int mxr_power_get(struct mxr_device *mdev)
+{
+	int ret = pm_runtime_get_sync(mdev->dev);
+
+	/* returning 1 means that power is already enabled,
+	 * so zero success be returned */
+	if (IS_ERR_VALUE(ret))
+		return ret;
+	return 0;
+}
+
+void mxr_power_put(struct mxr_device *mdev)
+{
+	pm_runtime_put_sync(mdev->dev);
+}
+
+/* --------- RESOURCE MANAGEMENT -------------*/
+
+static int __devinit mxr_acquire_plat_resources(struct mxr_device *mdev,
+	struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mxr");
+	if (res == NULL) {
+		mxr_err(mdev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail;
+	}
+
+	mdev->res.mxr_regs = ioremap(res->start, resource_size(res));
+	if (mdev->res.mxr_regs == NULL) {
+		mxr_err(mdev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vp");
+	if (res == NULL) {
+		mxr_err(mdev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_mxr_regs;
+	}
+
+	mdev->res.vp_regs = ioremap(res->start, resource_size(res));
+	if (mdev->res.vp_regs == NULL) {
+		mxr_err(mdev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_mxr_regs;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "irq");
+	if (res == NULL) {
+		mxr_err(mdev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_vp_regs;
+	}
+
+	ret = request_irq(res->start, mxr_irq_handler, 0, "s5p-mixer", mdev);
+	if (ret) {
+		mxr_err(mdev, "request interrupt failed.\n");
+		goto fail_vp_regs;
+	}
+	mdev->res.irq = res->start;
+
+	return 0;
+
+fail_vp_regs:
+	iounmap(mdev->res.vp_regs);
+
+fail_mxr_regs:
+	iounmap(mdev->res.mxr_regs);
+
+fail:
+	return ret;
+}
+
+static void mxr_release_plat_resources(struct mxr_device *mdev)
+{
+	free_irq(mdev->res.irq, mdev);
+	iounmap(mdev->res.vp_regs);
+	iounmap(mdev->res.mxr_regs);
+}
+
+static void mxr_release_clocks(struct mxr_device *mdev)
+{
+	struct mxr_resources *res = &mdev->res;
+
+	if (!IS_ERR_OR_NULL(res->sclk_dac))
+		clk_put(res->sclk_dac);
+	if (!IS_ERR_OR_NULL(res->sclk_hdmi))
+		clk_put(res->sclk_hdmi);
+	if (!IS_ERR_OR_NULL(res->sclk_mixer))
+		clk_put(res->sclk_mixer);
+	if (!IS_ERR_OR_NULL(res->vp))
+		clk_put(res->vp);
+	if (!IS_ERR_OR_NULL(res->mixer))
+		clk_put(res->mixer);
+}
+
+static int mxr_acquire_clocks(struct mxr_device *mdev)
+{
+	struct mxr_resources *res = &mdev->res;
+	struct device *dev = mdev->dev;
+
+	res->mixer = clk_get(dev, "mixer");
+	if (IS_ERR_OR_NULL(res->mixer)) {
+		mxr_err(mdev, "failed to get clock 'mixer'\n");
+		goto fail;
+	}
+	res->vp = clk_get(dev, "vp");
+	if (IS_ERR_OR_NULL(res->vp)) {
+		mxr_err(mdev, "failed to get clock 'vp'\n");
+		goto fail;
+	}
+	res->sclk_mixer = clk_get(dev, "sclk_mixer");
+	if (IS_ERR_OR_NULL(res->sclk_mixer)) {
+		mxr_err(mdev, "failed to get clock 'sclk_mixer'\n");
+		goto fail;
+	}
+	res->sclk_hdmi = clk_get(dev, "sclk_hdmi");
+	if (IS_ERR_OR_NULL(res->sclk_hdmi)) {
+		mxr_err(mdev, "failed to get clock 'sclk_hdmi'\n");
+		goto fail;
+	}
+	res->sclk_dac = clk_get(dev, "sclk_dac");
+	if (IS_ERR_OR_NULL(res->sclk_dac)) {
+		mxr_err(mdev, "failed to get clock 'sclk_dac'\n");
+		goto fail;
+	}
+
+	return 0;
+fail:
+	mxr_release_clocks(mdev);
+	return -ENODEV;
+}
+
+static int __devinit mxr_acquire_resources(struct mxr_device *mdev,
+	struct platform_device *pdev)
+{
+	int ret;
+	ret = mxr_acquire_plat_resources(mdev, pdev);
+
+	if (ret)
+		goto fail;
+
+	ret = mxr_acquire_clocks(mdev);
+	if (ret)
+		goto fail_plat;
+
+	mxr_info(mdev, "resources acquired\n");
+	return 0;
+
+fail_plat:
+	mxr_release_plat_resources(mdev);
+fail:
+	mxr_err(mdev, "resources acquire failed\n");
+	return ret;
+}
+
+static void mxr_release_resources(struct mxr_device *mdev)
+{
+	mxr_release_clocks(mdev);
+	mxr_release_plat_resources(mdev);
+	memset(&mdev->res, 0, sizeof mdev->res);
+}
+
+static void mxr_release_layers(struct mxr_device *mdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mdev->layer); ++i)
+		if (mdev->layer[i])
+			mxr_layer_release(mdev->layer[i]);
+}
+
+static int __devinit mxr_acquire_layers(struct mxr_device *mdev,
+	struct mxr_platform_data *pdata)
+{
+	mdev->layer[0] = mxr_graph_layer_create(mdev, 0);
+	mdev->layer[1] = mxr_graph_layer_create(mdev, 1);
+	mdev->layer[2] = mxr_vp_layer_create(mdev, 0);
+
+	if (!mdev->layer[0] || !mdev->layer[1] || !mdev->layer[2]) {
+		mxr_err(mdev, "failed to acquire layers\n");
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	mxr_release_layers(mdev);
+	return -ENODEV;
+}
+
+/* ---------- POWER MANAGEMENT ----------- */
+
+static int mxr_runtime_resume(struct device *dev)
+{
+	struct mxr_device *mdev = to_mdev(dev);
+	struct mxr_resources *res = &mdev->res;
+
+	mxr_dbg(mdev, "resume - start\n");
+	mutex_lock(&mdev->mutex);
+	/* turn clocks on */
+	clk_enable(res->mixer);
+	clk_enable(res->vp);
+	clk_enable(res->sclk_mixer);
+	/* apply default configuration */
+	mxr_reg_reset(mdev);
+	mxr_dbg(mdev, "resume - finished\n");
+
+	mutex_unlock(&mdev->mutex);
+	return 0;
+}
+
+static int mxr_runtime_suspend(struct device *dev)
+{
+	struct mxr_device *mdev = to_mdev(dev);
+	struct mxr_resources *res = &mdev->res;
+	mxr_dbg(mdev, "suspend - start\n");
+	mutex_lock(&mdev->mutex);
+	/* turn clocks off */
+	clk_disable(res->sclk_mixer);
+	clk_disable(res->vp);
+	clk_disable(res->mixer);
+	mutex_unlock(&mdev->mutex);
+	mxr_dbg(mdev, "suspend - finished\n");
+	return 0;
+}
+
+static const struct dev_pm_ops mxr_pm_ops = {
+	.runtime_suspend = mxr_runtime_suspend,
+	.runtime_resume	 = mxr_runtime_resume,
+};
+
+/* --------- DRIVER INITIALIZATION ---------- */
+
+static int __devinit mxr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mxr_platform_data *pdata = dev->platform_data;
+	struct mxr_device *mdev;
+	int ret;
+
+	/* mdev does not exist yet so no mxr_dbg is used */
+	dev_info(dev, "probe start\n");
+
+	mdev = kzalloc(sizeof *mdev, GFP_KERNEL);
+	if (!mdev) {
+		mxr_err(mdev, "not enough memory.\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* setup pointer to master device */
+	mdev->dev = dev;
+
+	mutex_init(&mdev->mutex);
+	spin_lock_init(&mdev->reg_slock);
+	init_waitqueue_head(&mdev->event_queue);
+
+	/* acquire resources: regs, irqs, clocks, regulators */
+	ret = mxr_acquire_resources(mdev, pdev);
+	if (ret)
+		goto fail_mem;
+
+	/* configure resources for video output */
+	ret = mxr_acquire_video(mdev, mxr_output_conf,
+		ARRAY_SIZE(mxr_output_conf));
+	if (ret)
+		goto fail_resources;
+
+	/* configure layers */
+	ret = mxr_acquire_layers(mdev, pdata);
+	if (ret)
+		goto fail_video;
+
+	pm_runtime_enable(dev);
+
+	mxr_info(mdev, "probe successful\n");
+	return 0;
+
+fail_video:
+	mxr_release_video(mdev);
+
+fail_resources:
+	mxr_release_resources(mdev);
+
+fail_mem:
+	kfree(mdev);
+
+fail:
+	dev_info(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit mxr_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mxr_device *mdev = to_mdev(dev);
+
+	pm_runtime_disable(dev);
+
+	mxr_release_layers(mdev);
+	mxr_release_video(mdev);
+	mxr_release_resources(mdev);
+
+	kfree(mdev);
+
+	dev_info(dev, "remove sucessful\n");
+	return 0;
+}
+
+static struct platform_driver mxr_driver __refdata = {
+	.probe = mxr_probe,
+	.remove = __devexit_p(mxr_remove),
+	.driver = {
+		.name = MXR_DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.pm = &mxr_pm_ops,
+	}
+};
+
+static int __init mxr_init(void)
+{
+	int i, ret;
+	static const char banner[] __initdata = KERN_INFO
+		"Samsung TV Mixer driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	/* Loading auxiliary modules */
+	for (i = 0; i < ARRAY_SIZE(mxr_output_conf); ++i)
+		request_module(mxr_output_conf[i].module_name);
+
+	ret = platform_driver_register(&mxr_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "registration of MIXER driver failed\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+module_init(mxr_init);
+
+static void __exit mxr_exit(void)
+{
+	platform_driver_unregister(&mxr_driver);
+}
+module_exit(mxr_exit);
diff --git a/drivers/media/video/s5p-tv/mixer_grp_layer.c b/drivers/media/video/s5p-tv/mixer_grp_layer.c
new file mode 100644
index 00000000000..58f0ba49580
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_grp_layer.c
@@ -0,0 +1,185 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include <media/videobuf2-dma-contig.h>
+
+/* FORMAT DEFINITIONS */
+
+static const struct mxr_format mxr_fb_fmt_rgb565 = {
+	.name = "RGB565",
+	.fourcc = V4L2_PIX_FMT_RGB565,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.num_planes = 1,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = 4,
+};
+
+static const struct mxr_format mxr_fb_fmt_argb1555 = {
+	.name = "ARGB1555",
+	.num_planes = 1,
+	.fourcc = V4L2_PIX_FMT_RGB555,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = 5,
+};
+
+static const struct mxr_format mxr_fb_fmt_argb4444 = {
+	.name = "ARGB4444",
+	.num_planes = 1,
+	.fourcc = V4L2_PIX_FMT_RGB444,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = 6,
+};
+
+static const struct mxr_format mxr_fb_fmt_argb8888 = {
+	.name = "ARGB8888",
+	.fourcc = V4L2_PIX_FMT_BGR32,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.num_planes = 1,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 4 },
+	},
+	.num_subframes = 1,
+	.cookie = 7,
+};
+
+static const struct mxr_format *mxr_graph_format[] = {
+	&mxr_fb_fmt_rgb565,
+	&mxr_fb_fmt_argb1555,
+	&mxr_fb_fmt_argb4444,
+	&mxr_fb_fmt_argb8888,
+};
+
+/* AUXILIARY CALLBACKS */
+
+static void mxr_graph_layer_release(struct mxr_layer *layer)
+{
+	mxr_base_layer_unregister(layer);
+	mxr_base_layer_release(layer);
+}
+
+static void mxr_graph_buffer_set(struct mxr_layer *layer,
+	struct mxr_buffer *buf)
+{
+	dma_addr_t addr = 0;
+
+	if (buf)
+		addr = vb2_dma_contig_plane_paddr(&buf->vb, 0);
+	mxr_reg_graph_buffer(layer->mdev, layer->idx, addr);
+}
+
+static void mxr_graph_stream_set(struct mxr_layer *layer, int en)
+{
+	mxr_reg_graph_layer_stream(layer->mdev, layer->idx, en);
+}
+
+static void mxr_graph_format_set(struct mxr_layer *layer)
+{
+	mxr_reg_graph_format(layer->mdev, layer->idx,
+		layer->fmt, &layer->geo);
+}
+
+static void mxr_graph_fix_geometry(struct mxr_layer *layer)
+{
+	struct mxr_geometry *geo = &layer->geo;
+
+	/* limit to boundary size */
+	geo->src.full_width = clamp_val(geo->src.full_width, 1, 32767);
+	geo->src.full_height = clamp_val(geo->src.full_height, 1, 2047);
+	geo->src.width = clamp_val(geo->src.width, 1, geo->src.full_width);
+	geo->src.width = min(geo->src.width, 2047U);
+	/* not possible to crop of Y axis */
+	geo->src.y_offset = min(geo->src.y_offset, geo->src.full_height - 1);
+	geo->src.height = geo->src.full_height - geo->src.y_offset;
+	/* limitting offset */
+	geo->src.x_offset = min(geo->src.x_offset,
+		geo->src.full_width - geo->src.width);
+
+	/* setting position in output */
+	geo->dst.width = min(geo->dst.width, geo->dst.full_width);
+	geo->dst.height = min(geo->dst.height, geo->dst.full_height);
+
+	/* Mixer supports only 1x and 2x scaling */
+	if (geo->dst.width >= 2 * geo->src.width) {
+		geo->x_ratio = 1;
+		geo->dst.width = 2 * geo->src.width;
+	} else {
+		geo->x_ratio = 0;
+		geo->dst.width = geo->src.width;
+	}
+
+	if (geo->dst.height >= 2 * geo->src.height) {
+		geo->y_ratio = 1;
+		geo->dst.height = 2 * geo->src.height;
+	} else {
+		geo->y_ratio = 0;
+		geo->dst.height = geo->src.height;
+	}
+
+	geo->dst.x_offset = min(geo->dst.x_offset,
+		geo->dst.full_width - geo->dst.width);
+	geo->dst.y_offset = min(geo->dst.y_offset,
+		geo->dst.full_height - geo->dst.height);
+}
+
+/* PUBLIC API */
+
+struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx)
+{
+	struct mxr_layer *layer;
+	int ret;
+	struct mxr_layer_ops ops = {
+		.release = mxr_graph_layer_release,
+		.buffer_set = mxr_graph_buffer_set,
+		.stream_set = mxr_graph_stream_set,
+		.format_set = mxr_graph_format_set,
+		.fix_geometry = mxr_graph_fix_geometry,
+	};
+	char name[32];
+
+	sprintf(name, "graph%d", idx);
+
+	layer = mxr_base_layer_create(mdev, idx, name, &ops);
+	if (layer == NULL) {
+		mxr_err(mdev, "failed to initialize layer(%d) base\n", idx);
+		goto fail;
+	}
+
+	layer->fmt_array = mxr_graph_format;
+	layer->fmt_array_size = ARRAY_SIZE(mxr_graph_format);
+
+	ret = mxr_base_layer_register(layer);
+	if (ret)
+		goto fail_layer;
+
+	return layer;
+
+fail_layer:
+	mxr_base_layer_release(layer);
+
+fail:
+	return NULL;
+}
+
diff --git a/drivers/media/video/s5p-tv/mixer_reg.c b/drivers/media/video/s5p-tv/mixer_reg.c
new file mode 100644
index 00000000000..38dac672aa1
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_reg.c
@@ -0,0 +1,541 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+#include "regs-mixer.h"
+#include "regs-vp.h"
+
+#include <linux/delay.h>
+
+/* Register access subroutines */
+
+static inline u32 vp_read(struct mxr_device *mdev, u32 reg_id)
+{
+	return readl(mdev->res.vp_regs + reg_id);
+}
+
+static inline void vp_write(struct mxr_device *mdev, u32 reg_id, u32 val)
+{
+	writel(val, mdev->res.vp_regs + reg_id);
+}
+
+static inline void vp_write_mask(struct mxr_device *mdev, u32 reg_id,
+	u32 val, u32 mask)
+{
+	u32 old = vp_read(mdev, reg_id);
+
+	val = (val & mask) | (old & ~mask);
+	writel(val, mdev->res.vp_regs + reg_id);
+}
+
+static inline u32 mxr_read(struct mxr_device *mdev, u32 reg_id)
+{
+	return readl(mdev->res.mxr_regs + reg_id);
+}
+
+static inline void mxr_write(struct mxr_device *mdev, u32 reg_id, u32 val)
+{
+	writel(val, mdev->res.mxr_regs + reg_id);
+}
+
+static inline void mxr_write_mask(struct mxr_device *mdev, u32 reg_id,
+	u32 val, u32 mask)
+{
+	u32 old = mxr_read(mdev, reg_id);
+
+	val = (val & mask) | (old & ~mask);
+	writel(val, mdev->res.mxr_regs + reg_id);
+}
+
+void mxr_vsync_set_update(struct mxr_device *mdev, int en)
+{
+	/* block update on vsync */
+	mxr_write_mask(mdev, MXR_STATUS, en ? MXR_STATUS_SYNC_ENABLE : 0,
+		MXR_STATUS_SYNC_ENABLE);
+	vp_write(mdev, VP_SHADOW_UPDATE, en ? VP_SHADOW_UPDATE_ENABLE : 0);
+}
+
+static void __mxr_reg_vp_reset(struct mxr_device *mdev)
+{
+	int tries = 100;
+
+	vp_write(mdev, VP_SRESET, VP_SRESET_PROCESSING);
+	for (tries = 100; tries; --tries) {
+		/* waiting until VP_SRESET_PROCESSING is 0 */
+		if (~vp_read(mdev, VP_SRESET) & VP_SRESET_PROCESSING)
+			break;
+		mdelay(10);
+	}
+	WARN(tries == 0, "failed to reset Video Processor\n");
+}
+
+static void mxr_reg_vp_default_filter(struct mxr_device *mdev);
+
+void mxr_reg_reset(struct mxr_device *mdev)
+{
+	unsigned long flags;
+	u32 val; /* value stored to register */
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	/* set output in RGB888 mode */
+	mxr_write(mdev, MXR_CFG, MXR_CFG_OUT_YUV444);
+
+	/* 16 beat burst in DMA */
+	mxr_write_mask(mdev, MXR_STATUS, MXR_STATUS_16_BURST,
+		MXR_STATUS_BURST_MASK);
+
+	/* setting default layer priority: layer1 > video > layer0
+	 * because typical usage scenario would be
+	 * layer0 - framebuffer
+	 * video - video overlay
+	 * layer1 - OSD
+	 */
+	val  = MXR_LAYER_CFG_GRP0_VAL(1);
+	val |= MXR_LAYER_CFG_VP_VAL(2);
+	val |= MXR_LAYER_CFG_GRP1_VAL(3);
+	mxr_write(mdev, MXR_LAYER_CFG, val);
+
+	/* use dark gray background color */
+	mxr_write(mdev, MXR_BG_COLOR0, 0x808080);
+	mxr_write(mdev, MXR_BG_COLOR1, 0x808080);
+	mxr_write(mdev, MXR_BG_COLOR2, 0x808080);
+
+	/* setting graphical layers */
+
+	val  = MXR_GRP_CFG_COLOR_KEY_DISABLE; /* no blank key */
+	val |= MXR_GRP_CFG_BLEND_PRE_MUL; /* premul mode */
+	val |= MXR_GRP_CFG_ALPHA_VAL(0xff); /* non-transparent alpha */
+
+	/* the same configuration for both layers */
+	mxr_write(mdev, MXR_GRAPHIC_CFG(0), val);
+	mxr_write(mdev, MXR_GRAPHIC_CFG(1), val);
+
+	/* configuration of Video Processor Registers */
+	__mxr_reg_vp_reset(mdev);
+	mxr_reg_vp_default_filter(mdev);
+
+	/* enable all interrupts */
+	mxr_write_mask(mdev, MXR_INT_EN, ~0, MXR_INT_EN_ALL);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_graph_format(struct mxr_device *mdev, int idx,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo)
+{
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	/* setup format */
+	mxr_write_mask(mdev, MXR_GRAPHIC_CFG(idx),
+		MXR_GRP_CFG_FORMAT_VAL(fmt->cookie), MXR_GRP_CFG_FORMAT_MASK);
+
+	/* setup geometry */
+	mxr_write(mdev, MXR_GRAPHIC_SPAN(idx), geo->src.full_width);
+	val  = MXR_GRP_WH_WIDTH(geo->src.width);
+	val |= MXR_GRP_WH_HEIGHT(geo->src.height);
+	val |= MXR_GRP_WH_H_SCALE(geo->x_ratio);
+	val |= MXR_GRP_WH_V_SCALE(geo->y_ratio);
+	mxr_write(mdev, MXR_GRAPHIC_WH(idx), val);
+
+	/* setup offsets in source image */
+	val  = MXR_GRP_SXY_SX(geo->src.x_offset);
+	val |= MXR_GRP_SXY_SY(geo->src.y_offset);
+	mxr_write(mdev, MXR_GRAPHIC_SXY(idx), val);
+
+	/* setup offsets in display image */
+	val  = MXR_GRP_DXY_DX(geo->dst.x_offset);
+	val |= MXR_GRP_DXY_DY(geo->dst.y_offset);
+	mxr_write(mdev, MXR_GRAPHIC_DXY(idx), val);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_vp_format(struct mxr_device *mdev,
+	const struct mxr_format *fmt, const struct mxr_geometry *geo)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	vp_write_mask(mdev, VP_MODE, fmt->cookie, VP_MODE_FMT_MASK);
+
+	/* setting size of input image */
+	vp_write(mdev, VP_IMG_SIZE_Y, VP_IMG_HSIZE(geo->src.full_width) |
+		VP_IMG_VSIZE(geo->src.full_height));
+	/* chroma height has to reduced by 2 to avoid chroma distorions */
+	vp_write(mdev, VP_IMG_SIZE_C, VP_IMG_HSIZE(geo->src.full_width) |
+		VP_IMG_VSIZE(geo->src.full_height / 2));
+
+	vp_write(mdev, VP_SRC_WIDTH, geo->src.width);
+	vp_write(mdev, VP_SRC_HEIGHT, geo->src.height);
+	vp_write(mdev, VP_SRC_H_POSITION,
+		VP_SRC_H_POSITION_VAL(geo->src.x_offset));
+	vp_write(mdev, VP_SRC_V_POSITION, geo->src.y_offset);
+
+	vp_write(mdev, VP_DST_WIDTH, geo->dst.width);
+	vp_write(mdev, VP_DST_H_POSITION, geo->dst.x_offset);
+	if (geo->dst.field == V4L2_FIELD_INTERLACED) {
+		vp_write(mdev, VP_DST_HEIGHT, geo->dst.height / 2);
+		vp_write(mdev, VP_DST_V_POSITION, geo->dst.y_offset / 2);
+	} else {
+		vp_write(mdev, VP_DST_HEIGHT, geo->dst.height);
+		vp_write(mdev, VP_DST_V_POSITION, geo->dst.y_offset);
+	}
+
+	vp_write(mdev, VP_H_RATIO, geo->x_ratio);
+	vp_write(mdev, VP_V_RATIO, geo->y_ratio);
+
+	vp_write(mdev, VP_ENDIAN_MODE, VP_ENDIAN_MODE_LITTLE);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+
+}
+
+void mxr_reg_graph_buffer(struct mxr_device *mdev, int idx, dma_addr_t addr)
+{
+	u32 val = addr ? ~0 : 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	if (idx == 0)
+		mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_GRP0_ENABLE);
+	else
+		mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_GRP1_ENABLE);
+	mxr_write(mdev, MXR_GRAPHIC_BASE(idx), addr);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_vp_buffer(struct mxr_device *mdev,
+	dma_addr_t luma_addr[2], dma_addr_t chroma_addr[2])
+{
+	u32 val = luma_addr[0] ? ~0 : 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_VP_ENABLE);
+	vp_write_mask(mdev, VP_ENABLE, val, VP_ENABLE_ON);
+	/* TODO: fix tiled mode */
+	vp_write(mdev, VP_TOP_Y_PTR, luma_addr[0]);
+	vp_write(mdev, VP_TOP_C_PTR, chroma_addr[0]);
+	vp_write(mdev, VP_BOT_Y_PTR, luma_addr[1]);
+	vp_write(mdev, VP_BOT_C_PTR, chroma_addr[1]);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+static void mxr_irq_layer_handle(struct mxr_layer *layer)
+{
+	struct list_head *head = &layer->enq_list;
+	struct mxr_buffer *done;
+
+	/* skip non-existing layer */
+	if (layer == NULL)
+		return;
+
+	spin_lock(&layer->enq_slock);
+	if (layer->state == MXR_LAYER_IDLE)
+		goto done;
+
+	done = layer->shadow_buf;
+	layer->shadow_buf = layer->update_buf;
+
+	if (list_empty(head)) {
+		if (layer->state != MXR_LAYER_STREAMING)
+			layer->update_buf = NULL;
+	} else {
+		struct mxr_buffer *next;
+		next = list_first_entry(head, struct mxr_buffer, list);
+		list_del(&next->list);
+		layer->update_buf = next;
+	}
+
+	layer->ops.buffer_set(layer, layer->update_buf);
+
+	if (done && done != layer->shadow_buf)
+		vb2_buffer_done(&done->vb, VB2_BUF_STATE_DONE);
+
+done:
+	spin_unlock(&layer->enq_slock);
+}
+
+irqreturn_t mxr_irq_handler(int irq, void *dev_data)
+{
+	struct mxr_device *mdev = dev_data;
+	u32 i, val;
+
+	spin_lock(&mdev->reg_slock);
+	val = mxr_read(mdev, MXR_INT_STATUS);
+
+	/* wake up process waiting for VSYNC */
+	if (val & MXR_INT_STATUS_VSYNC) {
+		set_bit(MXR_EVENT_VSYNC, &mdev->event_flags);
+		wake_up(&mdev->event_queue);
+	}
+
+	/* clear interrupts */
+	if (~val & MXR_INT_EN_VSYNC) {
+		/* vsync interrupt use different bit for read and clear */
+		val &= ~MXR_INT_EN_VSYNC;
+		val |= MXR_INT_CLEAR_VSYNC;
+	}
+	mxr_write(mdev, MXR_INT_STATUS, val);
+
+	spin_unlock(&mdev->reg_slock);
+	/* leave on non-vsync event */
+	if (~val & MXR_INT_CLEAR_VSYNC)
+		return IRQ_HANDLED;
+	for (i = 0; i < MXR_MAX_LAYERS; ++i)
+		mxr_irq_layer_handle(mdev->layer[i]);
+	return IRQ_HANDLED;
+}
+
+void mxr_reg_s_output(struct mxr_device *mdev, int cookie)
+{
+	u32 val;
+
+	val = cookie == 0 ? MXR_CFG_DST_SDO : MXR_CFG_DST_HDMI;
+	mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_DST_MASK);
+}
+
+void mxr_reg_streamon(struct mxr_device *mdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	/* single write -> no need to block vsync update */
+
+	/* start MIXER */
+	mxr_write_mask(mdev, MXR_STATUS, ~0, MXR_STATUS_REG_RUN);
+
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_streamoff(struct mxr_device *mdev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	/* single write -> no need to block vsync update */
+
+	/* stop MIXER */
+	mxr_write_mask(mdev, MXR_STATUS, 0, MXR_STATUS_REG_RUN);
+
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+int mxr_reg_wait4vsync(struct mxr_device *mdev)
+{
+	int ret;
+
+	clear_bit(MXR_EVENT_VSYNC, &mdev->event_flags);
+	/* TODO: consider adding interruptible */
+	ret = wait_event_timeout(mdev->event_queue,
+		test_bit(MXR_EVENT_VSYNC, &mdev->event_flags),
+		msecs_to_jiffies(1000));
+	if (ret > 0)
+		return 0;
+	if (ret < 0)
+		return ret;
+	mxr_warn(mdev, "no vsync detected - timeout\n");
+	return -ETIME;
+}
+
+void mxr_reg_set_mbus_fmt(struct mxr_device *mdev,
+	struct v4l2_mbus_framefmt *fmt)
+{
+	u32 val = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->reg_slock, flags);
+	mxr_vsync_set_update(mdev, MXR_DISABLE);
+
+	/* choosing between interlace and progressive mode */
+	if (fmt->field == V4L2_FIELD_INTERLACED)
+		val |= MXR_CFG_SCAN_INTERLACE;
+	else
+		val |= MXR_CFG_SCAN_PROGRASSIVE;
+
+	/* choosing between porper HD and SD mode */
+	if (fmt->height == 480)
+		val |= MXR_CFG_SCAN_NTSC | MXR_CFG_SCAN_SD;
+	else if (fmt->height == 576)
+		val |= MXR_CFG_SCAN_PAL | MXR_CFG_SCAN_SD;
+	else if (fmt->height == 720)
+		val |= MXR_CFG_SCAN_HD_720 | MXR_CFG_SCAN_HD;
+	else if (fmt->height == 1080)
+		val |= MXR_CFG_SCAN_HD_1080 | MXR_CFG_SCAN_HD;
+	else
+		WARN(1, "unrecognized mbus height %u!\n", fmt->height);
+
+	mxr_write_mask(mdev, MXR_CFG, val, MXR_CFG_SCAN_MASK);
+
+	val = (fmt->field == V4L2_FIELD_INTERLACED) ? ~0 : 0;
+	vp_write_mask(mdev, VP_MODE, val,
+		VP_MODE_LINE_SKIP | VP_MODE_FIELD_ID_AUTO_TOGGLING);
+
+	mxr_vsync_set_update(mdev, MXR_ENABLE);
+	spin_unlock_irqrestore(&mdev->reg_slock, flags);
+}
+
+void mxr_reg_graph_layer_stream(struct mxr_device *mdev, int idx, int en)
+{
+	/* no extra actions need to be done */
+}
+
+void mxr_reg_vp_layer_stream(struct mxr_device *mdev, int en)
+{
+	/* no extra actions need to be done */
+}
+
+static const u8 filter_y_horiz_tap8[] = {
+	0,	-1,	-1,	-1,	-1,	-1,	-1,	-1,
+	-1,	-1,	-1,	-1,	-1,	0,	0,	0,
+	0,	2,	4,	5,	6,	6,	6,	6,
+	6,	5,	5,	4,	3,	2,	1,	1,
+	0,	-6,	-12,	-16,	-18,	-20,	-21,	-20,
+	-20,	-18,	-16,	-13,	-10,	-8,	-5,	-2,
+	127,	126,	125,	121,	114,	107,	99,	89,
+	79,	68,	57,	46,	35,	25,	16,	8,
+};
+
+static const u8 filter_y_vert_tap4[] = {
+	0,	-3,	-6,	-8,	-8,	-8,	-8,	-7,
+	-6,	-5,	-4,	-3,	-2,	-1,	-1,	0,
+	127,	126,	124,	118,	111,	102,	92,	81,
+	70,	59,	48,	37,	27,	19,	11,	5,
+	0,	5,	11,	19,	27,	37,	48,	59,
+	70,	81,	92,	102,	111,	118,	124,	126,
+	0,	0,	-1,	-1,	-2,	-3,	-4,	-5,
+	-6,	-7,	-8,	-8,	-8,	-8,	-6,	-3,
+};
+
+static const u8 filter_cr_horiz_tap4[] = {
+	0,	-3,	-6,	-8,	-8,	-8,	-8,	-7,
+	-6,	-5,	-4,	-3,	-2,	-1,	-1,	0,
+	127,	126,	124,	118,	111,	102,	92,	81,
+	70,	59,	48,	37,	27,	19,	11,	5,
+};
+
+static inline void mxr_reg_vp_filter_set(struct mxr_device *mdev,
+	int reg_id, const u8 *data, unsigned int size)
+{
+	/* assure 4-byte align */
+	BUG_ON(size & 3);
+	for (; size; size -= 4, reg_id += 4, data += 4) {
+		u32 val = (data[0] << 24) |  (data[1] << 16) |
+			(data[2] << 8) | data[3];
+		vp_write(mdev, reg_id, val);
+	}
+}
+
+static void mxr_reg_vp_default_filter(struct mxr_device *mdev)
+{
+	mxr_reg_vp_filter_set(mdev, VP_POLY8_Y0_LL,
+		filter_y_horiz_tap8, sizeof filter_y_horiz_tap8);
+	mxr_reg_vp_filter_set(mdev, VP_POLY4_Y0_LL,
+		filter_y_vert_tap4, sizeof filter_y_vert_tap4);
+	mxr_reg_vp_filter_set(mdev, VP_POLY4_C0_LL,
+		filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4);
+}
+
+static void mxr_reg_mxr_dump(struct mxr_device *mdev)
+{
+#define DUMPREG(reg_id) \
+do { \
+	mxr_dbg(mdev, #reg_id " = %08x\n", \
+		(u32)readl(mdev->res.mxr_regs + reg_id)); \
+} while (0)
+
+	DUMPREG(MXR_STATUS);
+	DUMPREG(MXR_CFG);
+	DUMPREG(MXR_INT_EN);
+	DUMPREG(MXR_INT_STATUS);
+
+	DUMPREG(MXR_LAYER_CFG);
+	DUMPREG(MXR_VIDEO_CFG);
+
+	DUMPREG(MXR_GRAPHIC0_CFG);
+	DUMPREG(MXR_GRAPHIC0_BASE);
+	DUMPREG(MXR_GRAPHIC0_SPAN);
+	DUMPREG(MXR_GRAPHIC0_WH);
+	DUMPREG(MXR_GRAPHIC0_SXY);
+	DUMPREG(MXR_GRAPHIC0_DXY);
+
+	DUMPREG(MXR_GRAPHIC1_CFG);
+	DUMPREG(MXR_GRAPHIC1_BASE);
+	DUMPREG(MXR_GRAPHIC1_SPAN);
+	DUMPREG(MXR_GRAPHIC1_WH);
+	DUMPREG(MXR_GRAPHIC1_SXY);
+	DUMPREG(MXR_GRAPHIC1_DXY);
+#undef DUMPREG
+}
+
+static void mxr_reg_vp_dump(struct mxr_device *mdev)
+{
+#define DUMPREG(reg_id) \
+do { \
+	mxr_dbg(mdev, #reg_id " = %08x\n", \
+		(u32) readl(mdev->res.vp_regs + reg_id)); \
+} while (0)
+
+
+	DUMPREG(VP_ENABLE);
+	DUMPREG(VP_SRESET);
+	DUMPREG(VP_SHADOW_UPDATE);
+	DUMPREG(VP_FIELD_ID);
+	DUMPREG(VP_MODE);
+	DUMPREG(VP_IMG_SIZE_Y);
+	DUMPREG(VP_IMG_SIZE_C);
+	DUMPREG(VP_PER_RATE_CTRL);
+	DUMPREG(VP_TOP_Y_PTR);
+	DUMPREG(VP_BOT_Y_PTR);
+	DUMPREG(VP_TOP_C_PTR);
+	DUMPREG(VP_BOT_C_PTR);
+	DUMPREG(VP_ENDIAN_MODE);
+	DUMPREG(VP_SRC_H_POSITION);
+	DUMPREG(VP_SRC_V_POSITION);
+	DUMPREG(VP_SRC_WIDTH);
+	DUMPREG(VP_SRC_HEIGHT);
+	DUMPREG(VP_DST_H_POSITION);
+	DUMPREG(VP_DST_V_POSITION);
+	DUMPREG(VP_DST_WIDTH);
+	DUMPREG(VP_DST_HEIGHT);
+	DUMPREG(VP_H_RATIO);
+	DUMPREG(VP_V_RATIO);
+
+#undef DUMPREG
+}
+
+void mxr_reg_dump(struct mxr_device *mdev)
+{
+	mxr_reg_mxr_dump(mdev);
+	mxr_reg_vp_dump(mdev);
+}
+
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
new file mode 100644
index 00000000000..43ac22f35bc
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -0,0 +1,1006 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include <media/v4l2-ioctl.h>
+#include <linux/videodev2.h>
+#include <linux/mm.h>
+#include <linux/version.h>
+#include <linux/timer.h>
+#include <media/videobuf2-dma-contig.h>
+
+static int find_reg_callback(struct device *dev, void *p)
+{
+	struct v4l2_subdev **sd = p;
+
+	*sd = dev_get_drvdata(dev);
+	/* non-zero value stops iteration */
+	return 1;
+}
+
+static struct v4l2_subdev *find_and_register_subdev(
+	struct mxr_device *mdev, char *module_name)
+{
+	struct device_driver *drv;
+	struct v4l2_subdev *sd = NULL;
+	int ret;
+
+	/* TODO: add waiting until probe is finished */
+	drv = driver_find(module_name, &platform_bus_type);
+	if (!drv) {
+		mxr_warn(mdev, "module %s is missing\n", module_name);
+		return NULL;
+	}
+	/* driver refcnt is increased, it is safe to iterate over devices */
+	ret = driver_for_each_device(drv, NULL, &sd, find_reg_callback);
+	/* ret == 0 means that find_reg_callback was never executed */
+	if (sd == NULL) {
+		mxr_warn(mdev, "module %s provides no subdev!\n", module_name);
+		goto done;
+	}
+	/* v4l2_device_register_subdev detects if sd is NULL */
+	ret = v4l2_device_register_subdev(&mdev->v4l2_dev, sd);
+	if (ret) {
+		mxr_warn(mdev, "failed to register subdev %s\n", sd->name);
+		sd = NULL;
+	}
+
+done:
+	put_driver(drv);
+	return sd;
+}
+
+int __devinit mxr_acquire_video(struct mxr_device *mdev,
+	struct mxr_output_conf *output_conf, int output_count)
+{
+	struct device *dev = mdev->dev;
+	struct v4l2_device *v4l2_dev = &mdev->v4l2_dev;
+	int i;
+	int ret = 0;
+	struct v4l2_subdev *sd;
+
+	strlcpy(v4l2_dev->name, dev_name(mdev->dev), sizeof(v4l2_dev->name));
+	/* prepare context for V4L2 device */
+	ret = v4l2_device_register(dev, v4l2_dev);
+	if (ret) {
+		mxr_err(mdev, "could not register v4l2 device.\n");
+		goto fail;
+	}
+
+	mdev->alloc_ctx = vb2_dma_contig_init_ctx(mdev->dev);
+	if (IS_ERR_OR_NULL(mdev->alloc_ctx)) {
+		mxr_err(mdev, "could not acquire vb2 allocator\n");
+		goto fail_v4l2_dev;
+	}
+
+	/* registering outputs */
+	mdev->output_cnt = 0;
+	for (i = 0; i < output_count; ++i) {
+		struct mxr_output_conf *conf = &output_conf[i];
+		struct mxr_output *out;
+
+		sd = find_and_register_subdev(mdev, conf->module_name);
+		/* trying to register next output */
+		if (sd == NULL)
+			continue;
+		out = kzalloc(sizeof *out, GFP_KERNEL);
+		if (out == NULL) {
+			mxr_err(mdev, "no memory for '%s'\n",
+				conf->output_name);
+			ret = -ENOMEM;
+			/* registered subdevs are removed in fail_v4l2_dev */
+			goto fail_output;
+		}
+		strlcpy(out->name, conf->output_name, sizeof(out->name));
+		out->sd = sd;
+		out->cookie = conf->cookie;
+		mdev->output[mdev->output_cnt++] = out;
+		mxr_info(mdev, "added output '%s' from module '%s'\n",
+			conf->output_name, conf->module_name);
+		/* checking if maximal number of outputs is reached */
+		if (mdev->output_cnt >= MXR_MAX_OUTPUTS)
+			break;
+	}
+
+	if (mdev->output_cnt == 0) {
+		mxr_err(mdev, "failed to register any output\n");
+		ret = -ENODEV;
+		/* skipping fail_output because there is nothing to free */
+		goto fail_vb2_allocator;
+	}
+
+	return 0;
+
+fail_output:
+	/* kfree is NULL-safe */
+	for (i = 0; i < mdev->output_cnt; ++i)
+		kfree(mdev->output[i]);
+	memset(mdev->output, 0, sizeof mdev->output);
+
+fail_vb2_allocator:
+	/* freeing allocator context */
+	vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx);
+
+fail_v4l2_dev:
+	/* NOTE: automatically unregister all subdevs */
+	v4l2_device_unregister(v4l2_dev);
+
+fail:
+	return ret;
+}
+
+void __devexit mxr_release_video(struct mxr_device *mdev)
+{
+	int i;
+
+	/* kfree is NULL-safe */
+	for (i = 0; i < mdev->output_cnt; ++i)
+		kfree(mdev->output[i]);
+
+	vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx);
+	v4l2_device_unregister(&mdev->v4l2_dev);
+}
+
+static int mxr_querycap(struct file *file, void *priv,
+	struct v4l2_capability *cap)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	strlcpy(cap->driver, MXR_DRIVER_NAME, sizeof cap->driver);
+	strlcpy(cap->card, layer->vfd.name, sizeof cap->card);
+	sprintf(cap->bus_info, "%d", layer->idx);
+	cap->version = KERNEL_VERSION(0, 1, 0);
+	cap->capabilities = V4L2_CAP_STREAMING |
+		V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OUTPUT_MPLANE;
+
+	return 0;
+}
+
+/* Geometry handling */
+static void mxr_layer_geo_fix(struct mxr_layer *layer)
+{
+	struct mxr_device *mdev = layer->mdev;
+	struct v4l2_mbus_framefmt mbus_fmt;
+
+	/* TODO: add some dirty flag to avoid unnecessary adjustments */
+	mxr_get_mbus_fmt(mdev, &mbus_fmt);
+	layer->geo.dst.full_width = mbus_fmt.width;
+	layer->geo.dst.full_height = mbus_fmt.height;
+	layer->geo.dst.field = mbus_fmt.field;
+	layer->ops.fix_geometry(layer);
+}
+
+static void mxr_layer_default_geo(struct mxr_layer *layer)
+{
+	struct mxr_device *mdev = layer->mdev;
+	struct v4l2_mbus_framefmt mbus_fmt;
+
+	memset(&layer->geo, 0, sizeof layer->geo);
+
+	mxr_get_mbus_fmt(mdev, &mbus_fmt);
+
+	layer->geo.dst.full_width = mbus_fmt.width;
+	layer->geo.dst.full_height = mbus_fmt.height;
+	layer->geo.dst.width = layer->geo.dst.full_width;
+	layer->geo.dst.height = layer->geo.dst.full_height;
+	layer->geo.dst.field = mbus_fmt.field;
+
+	layer->geo.src.full_width = mbus_fmt.width;
+	layer->geo.src.full_height = mbus_fmt.height;
+	layer->geo.src.width = layer->geo.src.full_width;
+	layer->geo.src.height = layer->geo.src.full_height;
+
+	layer->ops.fix_geometry(layer);
+}
+
+static void mxr_geometry_dump(struct mxr_device *mdev, struct mxr_geometry *geo)
+{
+	mxr_dbg(mdev, "src.full_size = (%u, %u)\n",
+		geo->src.full_width, geo->src.full_height);
+	mxr_dbg(mdev, "src.size = (%u, %u)\n",
+		geo->src.width, geo->src.height);
+	mxr_dbg(mdev, "src.offset = (%u, %u)\n",
+		geo->src.x_offset, geo->src.y_offset);
+	mxr_dbg(mdev, "dst.full_size = (%u, %u)\n",
+		geo->dst.full_width, geo->dst.full_height);
+	mxr_dbg(mdev, "dst.size = (%u, %u)\n",
+		geo->dst.width, geo->dst.height);
+	mxr_dbg(mdev, "dst.offset = (%u, %u)\n",
+		geo->dst.x_offset, geo->dst.y_offset);
+	mxr_dbg(mdev, "ratio = (%u, %u)\n",
+		geo->x_ratio, geo->y_ratio);
+}
+
+
+static const struct mxr_format *find_format_by_fourcc(
+	struct mxr_layer *layer, unsigned long fourcc);
+static const struct mxr_format *find_format_by_index(
+	struct mxr_layer *layer, unsigned long index);
+
+static int mxr_enum_fmt(struct file *file, void  *priv,
+	struct v4l2_fmtdesc *f)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	const struct mxr_format *fmt;
+
+	mxr_dbg(mdev, "%s\n", __func__);
+	fmt = find_format_by_index(layer, f->index);
+	if (fmt == NULL)
+		return -EINVAL;
+
+	strlcpy(f->description, fmt->name, sizeof(f->description));
+	f->pixelformat = fmt->fourcc;
+
+	return 0;
+}
+
+static int mxr_s_fmt(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	const struct mxr_format *fmt;
+	struct v4l2_pix_format_mplane *pix;
+	struct mxr_device *mdev = layer->mdev;
+	struct mxr_geometry *geo = &layer->geo;
+
+	mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__);
+
+	pix = &f->fmt.pix_mp;
+	fmt = find_format_by_fourcc(layer, pix->pixelformat);
+	if (fmt == NULL) {
+		mxr_warn(mdev, "not recognized fourcc: %08x\n",
+			pix->pixelformat);
+		return -EINVAL;
+	}
+	layer->fmt = fmt;
+	geo->src.full_width = pix->width;
+	geo->src.width = pix->width;
+	geo->src.full_height = pix->height;
+	geo->src.height = pix->height;
+	/* assure consistency of geometry */
+	mxr_layer_geo_fix(layer);
+	mxr_dbg(mdev, "width=%u height=%u span=%u\n",
+		geo->src.width, geo->src.height, geo->src.full_width);
+
+	return 0;
+}
+
+static unsigned int divup(unsigned int divident, unsigned int divisor)
+{
+	return (divident + divisor - 1) / divisor;
+}
+
+unsigned long mxr_get_plane_size(const struct mxr_block *blk,
+	unsigned int width, unsigned int height)
+{
+	unsigned int bl_width = divup(width, blk->width);
+	unsigned int bl_height = divup(height, blk->height);
+
+	return bl_width * bl_height * blk->size;
+}
+
+static void mxr_mplane_fill(struct v4l2_plane_pix_format *planes,
+	const struct mxr_format *fmt, u32 width, u32 height)
+{
+	int i;
+
+	memset(planes, 0, sizeof(*planes) * fmt->num_subframes);
+	for (i = 0; i < fmt->num_planes; ++i) {
+		struct v4l2_plane_pix_format *plane = planes
+			+ fmt->plane2subframe[i];
+		const struct mxr_block *blk = &fmt->plane[i];
+		u32 bl_width = divup(width, blk->width);
+		u32 bl_height = divup(height, blk->height);
+		u32 sizeimage = bl_width * bl_height * blk->size;
+		u16 bytesperline = bl_width * blk->size / blk->height;
+
+		plane->sizeimage += sizeimage;
+		plane->bytesperline = max(plane->bytesperline, bytesperline);
+	}
+}
+
+static int mxr_g_fmt(struct file *file, void *priv,
+			     struct v4l2_format *f)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct v4l2_pix_format_mplane *pix = &f->fmt.pix_mp;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	pix->width = layer->geo.src.full_width;
+	pix->height = layer->geo.src.full_height;
+	pix->field = V4L2_FIELD_NONE;
+	pix->pixelformat = layer->fmt->fourcc;
+	pix->colorspace = layer->fmt->colorspace;
+	mxr_mplane_fill(pix->plane_fmt, layer->fmt, pix->width, pix->height);
+
+	return 0;
+}
+
+static inline struct mxr_crop *choose_crop_by_type(struct mxr_geometry *geo,
+	enum v4l2_buf_type type)
+{
+	switch (type) {
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+	case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE:
+		return &geo->dst;
+	case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+		return &geo->src;
+	default:
+		return NULL;
+	}
+}
+
+static int mxr_g_crop(struct file *file, void *fh, struct v4l2_crop *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_crop *crop;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	crop = choose_crop_by_type(&layer->geo, a->type);
+	if (crop == NULL)
+		return -EINVAL;
+	mxr_layer_geo_fix(layer);
+	a->c.left = crop->x_offset;
+	a->c.top = crop->y_offset;
+	a->c.width = crop->width;
+	a->c.height = crop->height;
+	return 0;
+}
+
+static int mxr_s_crop(struct file *file, void *fh, struct v4l2_crop *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_crop *crop;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	crop = choose_crop_by_type(&layer->geo, a->type);
+	if (crop == NULL)
+		return -EINVAL;
+	crop->x_offset = a->c.left;
+	crop->y_offset = a->c.top;
+	crop->width = a->c.width;
+	crop->height = a->c.height;
+	mxr_layer_geo_fix(layer);
+	return 0;
+}
+
+static int mxr_cropcap(struct file *file, void *fh, struct v4l2_cropcap *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_crop *crop;
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	crop = choose_crop_by_type(&layer->geo, a->type);
+	if (crop == NULL)
+		return -EINVAL;
+	mxr_layer_geo_fix(layer);
+	a->bounds.left = 0;
+	a->bounds.top = 0;
+	a->bounds.width = crop->full_width;
+	a->bounds.top = crop->full_height;
+	a->defrect = a->bounds;
+	/* setting pixel aspect to 1/1 */
+	a->pixelaspect.numerator = 1;
+	a->pixelaspect.denominator = 1;
+	return 0;
+}
+
+static int mxr_enum_dv_presets(struct file *file, void *fh,
+	struct v4l2_dv_enum_preset *preset)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+	ret = v4l2_subdev_call(to_outsd(mdev), video, enum_dv_presets, preset);
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_s_dv_preset(struct file *file, void *fh,
+	struct v4l2_dv_preset *preset)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+
+	/* preset change cannot be done while there is an entity
+	 * dependant on output configuration
+	 */
+	if (mdev->n_output > 0) {
+		mutex_unlock(&mdev->mutex);
+		return -EBUSY;
+	}
+
+	ret = v4l2_subdev_call(to_outsd(mdev), video, s_dv_preset, preset);
+
+	mutex_unlock(&mdev->mutex);
+
+	/* any failure should return EINVAL according to V4L2 doc */
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_g_dv_preset(struct file *file, void *fh,
+	struct v4l2_dv_preset *preset)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+	ret = v4l2_subdev_call(to_outsd(mdev), video, g_dv_preset, preset);
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_s_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+
+	/* standard change cannot be done while there is an entity
+	 * dependant on output configuration
+	 */
+	if (mdev->n_output > 0) {
+		mutex_unlock(&mdev->mutex);
+		return -EBUSY;
+	}
+
+	ret = v4l2_subdev_call(to_outsd(mdev), video, s_std_output, *norm);
+
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_g_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	/* lock protects from changing sd_out */
+	mutex_lock(&mdev->mutex);
+	ret = v4l2_subdev_call(to_outsd(mdev), video, g_std_output, norm);
+	mutex_unlock(&mdev->mutex);
+
+	return ret ? -EINVAL : 0;
+}
+
+static int mxr_enum_output(struct file *file, void *fh, struct v4l2_output *a)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	struct mxr_output *out;
+	struct v4l2_subdev *sd;
+
+	if (a->index >= mdev->output_cnt)
+		return -EINVAL;
+	out = mdev->output[a->index];
+	BUG_ON(out == NULL);
+	sd = out->sd;
+	strlcpy(a->name, out->name, sizeof(a->name));
+
+	/* try to obtain supported tv norms */
+	v4l2_subdev_call(sd, video, g_tvnorms_output, &a->std);
+	a->capabilities = 0;
+	if (sd->ops->video && sd->ops->video->s_dv_preset)
+		a->capabilities |= V4L2_OUT_CAP_PRESETS;
+	if (sd->ops->video && sd->ops->video->s_std_output)
+		a->capabilities |= V4L2_OUT_CAP_STD;
+	a->type = V4L2_OUTPUT_TYPE_ANALOG;
+
+	return 0;
+}
+
+static int mxr_s_output(struct file *file, void *fh, unsigned int i)
+{
+	struct video_device *vfd = video_devdata(file);
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret = 0;
+
+	if (i >= mdev->output_cnt || mdev->output[i] == NULL)
+		return -EINVAL;
+
+	mutex_lock(&mdev->mutex);
+	if (mdev->n_output > 0) {
+		ret = -EBUSY;
+		goto done;
+	}
+	mdev->current_output = i;
+	vfd->tvnorms = 0;
+	v4l2_subdev_call(to_outsd(mdev), video, g_tvnorms_output,
+		&vfd->tvnorms);
+	mxr_dbg(mdev, "tvnorms = %08llx\n", vfd->tvnorms);
+
+done:
+	mutex_unlock(&mdev->mutex);
+	return ret;
+}
+
+static int mxr_g_output(struct file *file, void *fh, unsigned int *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+
+	mutex_lock(&mdev->mutex);
+	*p = mdev->current_output;
+	mutex_unlock(&mdev->mutex);
+
+	return 0;
+}
+
+static int mxr_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_reqbufs(&layer->vb_queue, p);
+}
+
+static int mxr_querybuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_querybuf(&layer->vb_queue, p);
+}
+
+static int mxr_qbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d(%d)\n", __func__, __LINE__, p->index);
+	return vb2_qbuf(&layer->vb_queue, p);
+}
+
+static int mxr_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_dqbuf(&layer->vb_queue, p, file->f_flags & O_NONBLOCK);
+}
+
+static int mxr_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_streamon(&layer->vb_queue, i);
+}
+
+static int mxr_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	return vb2_streamoff(&layer->vb_queue, i);
+}
+
+static const struct v4l2_ioctl_ops mxr_ioctl_ops = {
+	.vidioc_querycap = mxr_querycap,
+	/* format handling */
+	.vidioc_enum_fmt_vid_out = mxr_enum_fmt,
+	.vidioc_s_fmt_vid_out_mplane = mxr_s_fmt,
+	.vidioc_g_fmt_vid_out_mplane = mxr_g_fmt,
+	/* buffer control */
+	.vidioc_reqbufs = mxr_reqbufs,
+	.vidioc_querybuf = mxr_querybuf,
+	.vidioc_qbuf = mxr_qbuf,
+	.vidioc_dqbuf = mxr_dqbuf,
+	/* Streaming control */
+	.vidioc_streamon = mxr_streamon,
+	.vidioc_streamoff = mxr_streamoff,
+	/* Preset functions */
+	.vidioc_enum_dv_presets = mxr_enum_dv_presets,
+	.vidioc_s_dv_preset = mxr_s_dv_preset,
+	.vidioc_g_dv_preset = mxr_g_dv_preset,
+	/* analog TV standard functions */
+	.vidioc_s_std = mxr_s_std,
+	.vidioc_g_std = mxr_g_std,
+	/* Output handling */
+	.vidioc_enum_output = mxr_enum_output,
+	.vidioc_s_output = mxr_s_output,
+	.vidioc_g_output = mxr_g_output,
+	/* Crop ioctls */
+	.vidioc_g_crop = mxr_g_crop,
+	.vidioc_s_crop = mxr_s_crop,
+	.vidioc_cropcap = mxr_cropcap,
+};
+
+static int mxr_video_open(struct file *file)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+	struct mxr_device *mdev = layer->mdev;
+	int ret = 0;
+
+	mxr_dbg(mdev, "%s:%d\n", __func__, __LINE__);
+	/* assure device probe is finished */
+	wait_for_device_probe();
+	/* creating context for file descriptor */
+	ret = v4l2_fh_open(file);
+	if (ret) {
+		mxr_err(mdev, "v4l2_fh_open failed\n");
+		return ret;
+	}
+
+	/* leaving if layer is already initialized */
+	if (!v4l2_fh_is_singular_file(file))
+		return 0;
+
+	/* FIXME: should power be enabled on open? */
+	ret = mxr_power_get(mdev);
+	if (ret) {
+		mxr_err(mdev, "power on failed\n");
+		goto fail_fh_open;
+	}
+
+	ret = vb2_queue_init(&layer->vb_queue);
+	if (ret != 0) {
+		mxr_err(mdev, "failed to initialize vb2 queue\n");
+		goto fail_power;
+	}
+	/* set default format, first on the list */
+	layer->fmt = layer->fmt_array[0];
+	/* setup default geometry */
+	mxr_layer_default_geo(layer);
+
+	return 0;
+
+fail_power:
+	mxr_power_put(mdev);
+
+fail_fh_open:
+	v4l2_fh_release(file);
+
+	return ret;
+}
+
+static unsigned int
+mxr_video_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	return vb2_poll(&layer->vb_queue, file, wait);
+}
+
+static int mxr_video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+
+	return vb2_mmap(&layer->vb_queue, vma);
+}
+
+static int mxr_video_release(struct file *file)
+{
+	struct mxr_layer *layer = video_drvdata(file);
+
+	mxr_dbg(layer->mdev, "%s:%d\n", __func__, __LINE__);
+	if (v4l2_fh_is_singular_file(file)) {
+		vb2_queue_release(&layer->vb_queue);
+		mxr_power_put(layer->mdev);
+	}
+	v4l2_fh_release(file);
+	return 0;
+}
+
+static const struct v4l2_file_operations mxr_fops = {
+	.owner = THIS_MODULE,
+	.open = mxr_video_open,
+	.poll = mxr_video_poll,
+	.mmap = mxr_video_mmap,
+	.release = mxr_video_release,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+	unsigned int *nplanes, unsigned long sizes[],
+	void *alloc_ctxs[])
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+	const struct mxr_format *fmt = layer->fmt;
+	int i;
+	struct mxr_device *mdev = layer->mdev;
+	struct v4l2_plane_pix_format planes[3];
+
+	mxr_dbg(mdev, "%s\n", __func__);
+	/* checking if format was configured */
+	if (fmt == NULL)
+		return -EINVAL;
+	mxr_dbg(mdev, "fmt = %s\n", fmt->name);
+	mxr_mplane_fill(planes, fmt, layer->geo.src.full_width,
+		layer->geo.src.full_height);
+
+	*nplanes = fmt->num_subframes;
+	for (i = 0; i < fmt->num_subframes; ++i) {
+		alloc_ctxs[i] = layer->mdev->alloc_ctx;
+		sizes[i] = PAGE_ALIGN(planes[i].sizeimage);
+		mxr_dbg(mdev, "size[%d] = %08lx\n", i, sizes[i]);
+	}
+
+	if (*nbuffers == 0)
+		*nbuffers = 1;
+
+	return 0;
+}
+
+static void buf_queue(struct vb2_buffer *vb)
+{
+	struct mxr_buffer *buffer = container_of(vb, struct mxr_buffer, vb);
+	struct mxr_layer *layer = vb2_get_drv_priv(vb->vb2_queue);
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+	int must_start = 0;
+
+	spin_lock_irqsave(&layer->enq_slock, flags);
+	if (layer->state == MXR_LAYER_STREAMING_START) {
+		layer->state = MXR_LAYER_STREAMING;
+		must_start = 1;
+	}
+	list_add_tail(&buffer->list, &layer->enq_list);
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+	if (must_start) {
+		layer->ops.stream_set(layer, MXR_ENABLE);
+		mxr_streamer_get(mdev);
+	}
+
+	mxr_dbg(mdev, "queuing buffer\n");
+}
+
+static void wait_lock(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+
+	mxr_dbg(layer->mdev, "%s\n", __func__);
+	mutex_lock(&layer->mutex);
+}
+
+static void wait_unlock(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+
+	mxr_dbg(layer->mdev, "%s\n", __func__);
+	mutex_unlock(&layer->mutex);
+}
+
+static int start_streaming(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+
+	mxr_dbg(mdev, "%s\n", __func__);
+	/* block any changes in output configuration */
+	mxr_output_get(mdev);
+
+	/* update layers geometry */
+	mxr_layer_geo_fix(layer);
+	mxr_geometry_dump(mdev, &layer->geo);
+
+	layer->ops.format_set(layer);
+	/* enabling layer in hardware */
+	spin_lock_irqsave(&layer->enq_slock, flags);
+	layer->state = MXR_LAYER_STREAMING_START;
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+
+	return 0;
+}
+
+static void mxr_watchdog(unsigned long arg)
+{
+	struct mxr_layer *layer = (struct mxr_layer *) arg;
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+
+	mxr_err(mdev, "watchdog fired for layer %s\n", layer->vfd.name);
+
+	spin_lock_irqsave(&layer->enq_slock, flags);
+
+	if (layer->update_buf == layer->shadow_buf)
+		layer->update_buf = NULL;
+	if (layer->update_buf) {
+		vb2_buffer_done(&layer->update_buf->vb, VB2_BUF_STATE_ERROR);
+		layer->update_buf = NULL;
+	}
+	if (layer->shadow_buf) {
+		vb2_buffer_done(&layer->shadow_buf->vb, VB2_BUF_STATE_ERROR);
+		layer->shadow_buf = NULL;
+	}
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+}
+
+static int stop_streaming(struct vb2_queue *vq)
+{
+	struct mxr_layer *layer = vb2_get_drv_priv(vq);
+	struct mxr_device *mdev = layer->mdev;
+	unsigned long flags;
+	struct timer_list watchdog;
+	struct mxr_buffer *buf, *buf_tmp;
+
+	mxr_dbg(mdev, "%s\n", __func__);
+
+	spin_lock_irqsave(&layer->enq_slock, flags);
+
+	/* reset list */
+	layer->state = MXR_LAYER_STREAMING_FINISH;
+
+	/* set all buffer to be done */
+	list_for_each_entry_safe(buf, buf_tmp, &layer->enq_list, list) {
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
+	}
+
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+
+	/* give 1 seconds to complete to complete last buffers */
+	setup_timer_on_stack(&watchdog, mxr_watchdog,
+		(unsigned long)layer);
+	mod_timer(&watchdog, jiffies + msecs_to_jiffies(1000));
+
+	/* wait until all buffers are goes to done state */
+	vb2_wait_for_all_buffers(vq);
+
+	/* stop timer if all synchronization is done */
+	del_timer_sync(&watchdog);
+	destroy_timer_on_stack(&watchdog);
+
+	/* stopping hardware */
+	spin_lock_irqsave(&layer->enq_slock, flags);
+	layer->state = MXR_LAYER_IDLE;
+	spin_unlock_irqrestore(&layer->enq_slock, flags);
+
+	/* disabling layer in hardware */
+	layer->ops.stream_set(layer, MXR_DISABLE);
+	/* remove one streamer */
+	mxr_streamer_put(mdev);
+	/* allow changes in output configuration */
+	mxr_output_put(mdev);
+	return 0;
+}
+
+static struct vb2_ops mxr_video_qops = {
+	.queue_setup = queue_setup,
+	.buf_queue = buf_queue,
+	.wait_prepare = wait_unlock,
+	.wait_finish = wait_lock,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
+
+/* FIXME: try to put this functions to mxr_base_layer_create */
+int mxr_base_layer_register(struct mxr_layer *layer)
+{
+	struct mxr_device *mdev = layer->mdev;
+	int ret;
+
+	ret = video_register_device(&layer->vfd, VFL_TYPE_GRABBER, -1);
+	if (ret)
+		mxr_err(mdev, "failed to register video device\n");
+	else
+		mxr_info(mdev, "registered layer %s as /dev/video%d\n",
+			layer->vfd.name, layer->vfd.num);
+	return ret;
+}
+
+void mxr_base_layer_unregister(struct mxr_layer *layer)
+{
+	video_unregister_device(&layer->vfd);
+}
+
+void mxr_layer_release(struct mxr_layer *layer)
+{
+	if (layer->ops.release)
+		layer->ops.release(layer);
+}
+
+void mxr_base_layer_release(struct mxr_layer *layer)
+{
+	kfree(layer);
+}
+
+static void mxr_vfd_release(struct video_device *vdev)
+{
+	printk(KERN_INFO "video device release\n");
+}
+
+struct mxr_layer *mxr_base_layer_create(struct mxr_device *mdev,
+	int idx, char *name, struct mxr_layer_ops *ops)
+{
+	struct mxr_layer *layer;
+
+	layer = kzalloc(sizeof *layer, GFP_KERNEL);
+	if (layer == NULL) {
+		mxr_err(mdev, "not enough memory for layer.\n");
+		goto fail;
+	}
+
+	layer->mdev = mdev;
+	layer->idx = idx;
+	layer->ops = *ops;
+
+	spin_lock_init(&layer->enq_slock);
+	INIT_LIST_HEAD(&layer->enq_list);
+	mutex_init(&layer->mutex);
+
+	layer->vfd = (struct video_device) {
+		.minor = -1,
+		.release = mxr_vfd_release,
+		.fops = &mxr_fops,
+		.ioctl_ops = &mxr_ioctl_ops,
+	};
+	strlcpy(layer->vfd.name, name, sizeof(layer->vfd.name));
+	/* let framework control PRIORITY */
+	set_bit(V4L2_FL_USE_FH_PRIO, &layer->vfd.flags);
+
+	video_set_drvdata(&layer->vfd, layer);
+	layer->vfd.lock = &layer->mutex;
+	layer->vfd.v4l2_dev = &mdev->v4l2_dev;
+
+	layer->vb_queue = (struct vb2_queue) {
+		.type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE,
+		.io_modes = VB2_MMAP | VB2_USERPTR,
+		.drv_priv = layer,
+		.buf_struct_size = sizeof(struct mxr_buffer),
+		.ops = &mxr_video_qops,
+		.mem_ops = &vb2_dma_contig_memops,
+	};
+
+	return layer;
+
+fail:
+	return NULL;
+}
+
+static const struct mxr_format *find_format_by_fourcc(
+	struct mxr_layer *layer, unsigned long fourcc)
+{
+	int i;
+
+	for (i = 0; i < layer->fmt_array_size; ++i)
+		if (layer->fmt_array[i]->fourcc == fourcc)
+			return layer->fmt_array[i];
+	return NULL;
+}
+
+static const struct mxr_format *find_format_by_index(
+	struct mxr_layer *layer, unsigned long index)
+{
+	if (index >= layer->fmt_array_size)
+		return NULL;
+	return layer->fmt_array[index];
+}
+
diff --git a/drivers/media/video/s5p-tv/mixer_vp_layer.c b/drivers/media/video/s5p-tv/mixer_vp_layer.c
new file mode 100644
index 00000000000..6950ed8ac1a
--- /dev/null
+++ b/drivers/media/video/s5p-tv/mixer_vp_layer.c
@@ -0,0 +1,211 @@
+/*
+ * Samsung TV Mixer driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include "mixer.h"
+
+#include "regs-vp.h"
+
+#include <media/videobuf2-dma-contig.h>
+
+/* FORMAT DEFINITIONS */
+static const struct mxr_format mxr_fmt_nv12 = {
+	.name = "NV12",
+	.fourcc = V4L2_PIX_FMT_NV12,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 1 },
+		{ .width = 2, .height = 2, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = VP_MODE_NV12 | VP_MODE_MEM_LINEAR,
+};
+
+static const struct mxr_format mxr_fmt_nv21 = {
+	.name = "NV21",
+	.fourcc = V4L2_PIX_FMT_NV21,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 1 },
+		{ .width = 2, .height = 2, .size = 2 },
+	},
+	.num_subframes = 1,
+	.cookie = VP_MODE_NV21 | VP_MODE_MEM_LINEAR,
+};
+
+static const struct mxr_format mxr_fmt_nv12m = {
+	.name = "NV12 (mplane)",
+	.fourcc = V4L2_PIX_FMT_NV12M,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 1, .height = 1, .size = 1 },
+		{ .width = 2, .height = 2, .size = 2 },
+	},
+	.num_subframes = 2,
+	.plane2subframe = {0, 1},
+	.cookie = VP_MODE_NV12 | VP_MODE_MEM_LINEAR,
+};
+
+static const struct mxr_format mxr_fmt_nv12mt = {
+	.name = "NV12 tiled (mplane)",
+	.fourcc = V4L2_PIX_FMT_NV12MT,
+	.colorspace = V4L2_COLORSPACE_JPEG,
+	.num_planes = 2,
+	.plane = {
+		{ .width = 128, .height = 32, .size = 4096 },
+		{ .width = 128, .height = 32, .size = 2048 },
+	},
+	.num_subframes = 2,
+	.plane2subframe = {0, 1},
+	.cookie = VP_MODE_NV12 | VP_MODE_MEM_TILED,
+};
+
+static const struct mxr_format *mxr_video_format[] = {
+	&mxr_fmt_nv12,
+	&mxr_fmt_nv21,
+	&mxr_fmt_nv12m,
+	&mxr_fmt_nv12mt,
+};
+
+/* AUXILIARY CALLBACKS */
+
+static void mxr_vp_layer_release(struct mxr_layer *layer)
+{
+	mxr_base_layer_unregister(layer);
+	mxr_base_layer_release(layer);
+}
+
+static void mxr_vp_buffer_set(struct mxr_layer *layer,
+	struct mxr_buffer *buf)
+{
+	dma_addr_t luma_addr[2] = {0, 0};
+	dma_addr_t chroma_addr[2] = {0, 0};
+
+	if (buf == NULL) {
+		mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr);
+		return;
+	}
+	luma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 0);
+	if (layer->fmt->num_subframes == 2) {
+		chroma_addr[0] = vb2_dma_contig_plane_paddr(&buf->vb, 1);
+	} else {
+		/* FIXME: mxr_get_plane_size compute integer division,
+		 * which is slow and should not be performed in interrupt */
+		chroma_addr[0] = luma_addr[0] + mxr_get_plane_size(
+			&layer->fmt->plane[0], layer->geo.src.full_width,
+			layer->geo.src.full_height);
+	}
+	if (layer->fmt->cookie & VP_MODE_MEM_TILED) {
+		luma_addr[1] = luma_addr[0] + 0x40;
+		chroma_addr[1] = chroma_addr[0] + 0x40;
+	} else {
+		luma_addr[1] = luma_addr[0] + layer->geo.src.full_width;
+		chroma_addr[1] = chroma_addr[0];
+	}
+	mxr_reg_vp_buffer(layer->mdev, luma_addr, chroma_addr);
+}
+
+static void mxr_vp_stream_set(struct mxr_layer *layer, int en)
+{
+	mxr_reg_vp_layer_stream(layer->mdev, en);
+}
+
+static void mxr_vp_format_set(struct mxr_layer *layer)
+{
+	mxr_reg_vp_format(layer->mdev, layer->fmt, &layer->geo);
+}
+
+static void mxr_vp_fix_geometry(struct mxr_layer *layer)
+{
+	struct mxr_geometry *geo = &layer->geo;
+
+	/* align horizontal size to 8 pixels */
+	geo->src.full_width = ALIGN(geo->src.full_width, 8);
+	/* limit to boundary size */
+	geo->src.full_width = clamp_val(geo->src.full_width, 8, 8192);
+	geo->src.full_height = clamp_val(geo->src.full_height, 1, 8192);
+	geo->src.width = clamp_val(geo->src.width, 32, geo->src.full_width);
+	geo->src.width = min(geo->src.width, 2047U);
+	geo->src.height = clamp_val(geo->src.height, 4, geo->src.full_height);
+	geo->src.height = min(geo->src.height, 2047U);
+
+	/* setting size of output window */
+	geo->dst.width = clamp_val(geo->dst.width, 8, geo->dst.full_width);
+	geo->dst.height = clamp_val(geo->dst.height, 1, geo->dst.full_height);
+
+	/* ensure that scaling is in range 1/4x to 16x */
+	if (geo->src.width >= 4 * geo->dst.width)
+		geo->src.width = 4 * geo->dst.width;
+	if (geo->dst.width >= 16 * geo->src.width)
+		geo->dst.width = 16 * geo->src.width;
+	if (geo->src.height >= 4 * geo->dst.height)
+		geo->src.height = 4 * geo->dst.height;
+	if (geo->dst.height >= 16 * geo->src.height)
+		geo->dst.height = 16 * geo->src.height;
+
+	/* setting scaling ratio */
+	geo->x_ratio = (geo->src.width << 16) / geo->dst.width;
+	geo->y_ratio = (geo->src.height << 16) / geo->dst.height;
+
+	/* adjust offsets */
+	geo->src.x_offset = min(geo->src.x_offset,
+		geo->src.full_width - geo->src.width);
+	geo->src.y_offset = min(geo->src.y_offset,
+		geo->src.full_height - geo->src.height);
+	geo->dst.x_offset = min(geo->dst.x_offset,
+		geo->dst.full_width - geo->dst.width);
+	geo->dst.y_offset = min(geo->dst.y_offset,
+		geo->dst.full_height - geo->dst.height);
+}
+
+/* PUBLIC API */
+
+struct mxr_layer *mxr_vp_layer_create(struct mxr_device *mdev, int idx)
+{
+	struct mxr_layer *layer;
+	int ret;
+	struct mxr_layer_ops ops = {
+		.release = mxr_vp_layer_release,
+		.buffer_set = mxr_vp_buffer_set,
+		.stream_set = mxr_vp_stream_set,
+		.format_set = mxr_vp_format_set,
+		.fix_geometry = mxr_vp_fix_geometry,
+	};
+	char name[32];
+
+	sprintf(name, "video%d", idx);
+
+	layer = mxr_base_layer_create(mdev, idx, name, &ops);
+	if (layer == NULL) {
+		mxr_err(mdev, "failed to initialize layer(%d) base\n", idx);
+		goto fail;
+	}
+
+	layer->fmt_array = mxr_video_format;
+	layer->fmt_array_size = ARRAY_SIZE(mxr_video_format);
+
+	ret = mxr_base_layer_register(layer);
+	if (ret)
+		goto fail_layer;
+
+	return layer;
+
+fail_layer:
+	mxr_base_layer_release(layer);
+
+fail:
+	return NULL;
+}
+
diff --git a/drivers/media/video/s5p-tv/regs-hdmi.h b/drivers/media/video/s5p-tv/regs-hdmi.h
new file mode 100644
index 00000000000..ac93ad6f2bc
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-hdmi.h
@@ -0,0 +1,141 @@
+/* linux/arch/arm/mach-exynos4/include/mach/regs-hdmi.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * HDMI register header file for Samsung TVOUT driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef SAMSUNG_REGS_HDMI_H
+#define SAMSUNG_REGS_HDMI_H
+
+/*
+ * Register part
+*/
+
+#define HDMI_CTRL_BASE(x)		((x) + 0x00000000)
+#define HDMI_CORE_BASE(x)		((x) + 0x00010000)
+#define HDMI_TG_BASE(x)			((x) + 0x00050000)
+
+/* Control registers */
+#define HDMI_INTC_CON			HDMI_CTRL_BASE(0x0000)
+#define HDMI_INTC_FLAG			HDMI_CTRL_BASE(0x0004)
+#define HDMI_HPD_STATUS			HDMI_CTRL_BASE(0x000C)
+#define HDMI_PHY_RSTOUT			HDMI_CTRL_BASE(0x0014)
+#define HDMI_PHY_VPLL			HDMI_CTRL_BASE(0x0018)
+#define HDMI_PHY_CMU			HDMI_CTRL_BASE(0x001C)
+#define HDMI_CORE_RSTOUT		HDMI_CTRL_BASE(0x0020)
+
+/* Core registers */
+#define HDMI_CON_0			HDMI_CORE_BASE(0x0000)
+#define HDMI_CON_1			HDMI_CORE_BASE(0x0004)
+#define HDMI_CON_2			HDMI_CORE_BASE(0x0008)
+#define HDMI_SYS_STATUS			HDMI_CORE_BASE(0x0010)
+#define HDMI_PHY_STATUS			HDMI_CORE_BASE(0x0014)
+#define HDMI_STATUS_EN			HDMI_CORE_BASE(0x0020)
+#define HDMI_HPD			HDMI_CORE_BASE(0x0030)
+#define HDMI_MODE_SEL			HDMI_CORE_BASE(0x0040)
+#define HDMI_BLUE_SCREEN_0		HDMI_CORE_BASE(0x0050)
+#define HDMI_BLUE_SCREEN_1		HDMI_CORE_BASE(0x0054)
+#define HDMI_BLUE_SCREEN_2		HDMI_CORE_BASE(0x0058)
+#define HDMI_H_BLANK_0			HDMI_CORE_BASE(0x00A0)
+#define HDMI_H_BLANK_1			HDMI_CORE_BASE(0x00A4)
+#define HDMI_V_BLANK_0			HDMI_CORE_BASE(0x00B0)
+#define HDMI_V_BLANK_1			HDMI_CORE_BASE(0x00B4)
+#define HDMI_V_BLANK_2			HDMI_CORE_BASE(0x00B8)
+#define HDMI_H_V_LINE_0			HDMI_CORE_BASE(0x00C0)
+#define HDMI_H_V_LINE_1			HDMI_CORE_BASE(0x00C4)
+#define HDMI_H_V_LINE_2			HDMI_CORE_BASE(0x00C8)
+#define HDMI_VSYNC_POL			HDMI_CORE_BASE(0x00E4)
+#define HDMI_INT_PRO_MODE		HDMI_CORE_BASE(0x00E8)
+#define HDMI_V_BLANK_F_0		HDMI_CORE_BASE(0x0110)
+#define HDMI_V_BLANK_F_1		HDMI_CORE_BASE(0x0114)
+#define HDMI_V_BLANK_F_2		HDMI_CORE_BASE(0x0118)
+#define HDMI_H_SYNC_GEN_0		HDMI_CORE_BASE(0x0120)
+#define HDMI_H_SYNC_GEN_1		HDMI_CORE_BASE(0x0124)
+#define HDMI_H_SYNC_GEN_2		HDMI_CORE_BASE(0x0128)
+#define HDMI_V_SYNC_GEN_1_0		HDMI_CORE_BASE(0x0130)
+#define HDMI_V_SYNC_GEN_1_1		HDMI_CORE_BASE(0x0134)
+#define HDMI_V_SYNC_GEN_1_2		HDMI_CORE_BASE(0x0138)
+#define HDMI_V_SYNC_GEN_2_0		HDMI_CORE_BASE(0x0140)
+#define HDMI_V_SYNC_GEN_2_1		HDMI_CORE_BASE(0x0144)
+#define HDMI_V_SYNC_GEN_2_2		HDMI_CORE_BASE(0x0148)
+#define HDMI_V_SYNC_GEN_3_0		HDMI_CORE_BASE(0x0150)
+#define HDMI_V_SYNC_GEN_3_1		HDMI_CORE_BASE(0x0154)
+#define HDMI_V_SYNC_GEN_3_2		HDMI_CORE_BASE(0x0158)
+#define HDMI_AVI_CON			HDMI_CORE_BASE(0x0300)
+#define HDMI_AVI_BYTE(n)		HDMI_CORE_BASE(0x0320 + 4 * (n))
+#define	HDMI_DC_CONTROL			HDMI_CORE_BASE(0x05C0)
+#define HDMI_VIDEO_PATTERN_GEN		HDMI_CORE_BASE(0x05C4)
+#define HDMI_HPD_GEN			HDMI_CORE_BASE(0x05C8)
+
+/* Timing generator registers */
+#define HDMI_TG_CMD			HDMI_TG_BASE(0x0000)
+#define HDMI_TG_H_FSZ_L			HDMI_TG_BASE(0x0018)
+#define HDMI_TG_H_FSZ_H			HDMI_TG_BASE(0x001C)
+#define HDMI_TG_HACT_ST_L		HDMI_TG_BASE(0x0020)
+#define HDMI_TG_HACT_ST_H		HDMI_TG_BASE(0x0024)
+#define HDMI_TG_HACT_SZ_L		HDMI_TG_BASE(0x0028)
+#define HDMI_TG_HACT_SZ_H		HDMI_TG_BASE(0x002C)
+#define HDMI_TG_V_FSZ_L			HDMI_TG_BASE(0x0030)
+#define HDMI_TG_V_FSZ_H			HDMI_TG_BASE(0x0034)
+#define HDMI_TG_VSYNC_L			HDMI_TG_BASE(0x0038)
+#define HDMI_TG_VSYNC_H			HDMI_TG_BASE(0x003C)
+#define HDMI_TG_VSYNC2_L		HDMI_TG_BASE(0x0040)
+#define HDMI_TG_VSYNC2_H		HDMI_TG_BASE(0x0044)
+#define HDMI_TG_VACT_ST_L		HDMI_TG_BASE(0x0048)
+#define HDMI_TG_VACT_ST_H		HDMI_TG_BASE(0x004C)
+#define HDMI_TG_VACT_SZ_L		HDMI_TG_BASE(0x0050)
+#define HDMI_TG_VACT_SZ_H		HDMI_TG_BASE(0x0054)
+#define HDMI_TG_FIELD_CHG_L		HDMI_TG_BASE(0x0058)
+#define HDMI_TG_FIELD_CHG_H		HDMI_TG_BASE(0x005C)
+#define HDMI_TG_VACT_ST2_L		HDMI_TG_BASE(0x0060)
+#define HDMI_TG_VACT_ST2_H		HDMI_TG_BASE(0x0064)
+#define HDMI_TG_VSYNC_TOP_HDMI_L	HDMI_TG_BASE(0x0078)
+#define HDMI_TG_VSYNC_TOP_HDMI_H	HDMI_TG_BASE(0x007C)
+#define HDMI_TG_VSYNC_BOT_HDMI_L	HDMI_TG_BASE(0x0080)
+#define HDMI_TG_VSYNC_BOT_HDMI_H	HDMI_TG_BASE(0x0084)
+#define HDMI_TG_FIELD_TOP_HDMI_L	HDMI_TG_BASE(0x0088)
+#define HDMI_TG_FIELD_TOP_HDMI_H	HDMI_TG_BASE(0x008C)
+#define HDMI_TG_FIELD_BOT_HDMI_L	HDMI_TG_BASE(0x0090)
+#define HDMI_TG_FIELD_BOT_HDMI_H	HDMI_TG_BASE(0x0094)
+
+/*
+ * Bit definition part
+ */
+
+/* HDMI_INTC_CON */
+#define HDMI_INTC_EN_GLOBAL		(1 << 6)
+#define HDMI_INTC_EN_HPD_PLUG		(1 << 3)
+#define HDMI_INTC_EN_HPD_UNPLUG		(1 << 2)
+
+/* HDMI_INTC_FLAG */
+#define HDMI_INTC_FLAG_HPD_PLUG		(1 << 3)
+#define HDMI_INTC_FLAG_HPD_UNPLUG	(1 << 2)
+
+/* HDMI_PHY_RSTOUT */
+#define HDMI_PHY_SW_RSTOUT		(1 << 0)
+
+/* HDMI_CORE_RSTOUT */
+#define HDMI_CORE_SW_RSTOUT		(1 << 0)
+
+/* HDMI_CON_0 */
+#define HDMI_BLUE_SCR_EN		(1 << 5)
+#define HDMI_EN				(1 << 0)
+
+/* HDMI_PHY_STATUS */
+#define HDMI_PHY_STATUS_READY		(1 << 0)
+
+/* HDMI_MODE_SEL */
+#define HDMI_MODE_HDMI_EN		(1 << 1)
+#define HDMI_MODE_DVI_EN		(1 << 0)
+#define HDMI_MODE_MASK			(3 << 0)
+
+/* HDMI_TG_CMD */
+#define HDMI_TG_EN			(1 << 0)
+
+#endif /* SAMSUNG_REGS_HDMI_H */
diff --git a/drivers/media/video/s5p-tv/regs-mixer.h b/drivers/media/video/s5p-tv/regs-mixer.h
new file mode 100644
index 00000000000..3c8442609c1
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-mixer.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Mixer register header file for Samsung Mixer driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#ifndef SAMSUNG_REGS_MIXER_H
+#define SAMSUNG_REGS_MIXER_H
+
+/*
+ * Register part
+ */
+#define MXR_STATUS			0x0000
+#define MXR_CFG				0x0004
+#define MXR_INT_EN			0x0008
+#define MXR_INT_STATUS			0x000C
+#define MXR_LAYER_CFG			0x0010
+#define MXR_VIDEO_CFG			0x0014
+#define MXR_GRAPHIC0_CFG		0x0020
+#define MXR_GRAPHIC0_BASE		0x0024
+#define MXR_GRAPHIC0_SPAN		0x0028
+#define MXR_GRAPHIC0_SXY		0x002C
+#define MXR_GRAPHIC0_WH			0x0030
+#define MXR_GRAPHIC0_DXY		0x0034
+#define MXR_GRAPHIC0_BLANK		0x0038
+#define MXR_GRAPHIC1_CFG		0x0040
+#define MXR_GRAPHIC1_BASE		0x0044
+#define MXR_GRAPHIC1_SPAN		0x0048
+#define MXR_GRAPHIC1_SXY		0x004C
+#define MXR_GRAPHIC1_WH			0x0050
+#define MXR_GRAPHIC1_DXY		0x0054
+#define MXR_GRAPHIC1_BLANK		0x0058
+#define MXR_BG_CFG			0x0060
+#define MXR_BG_COLOR0			0x0064
+#define MXR_BG_COLOR1			0x0068
+#define MXR_BG_COLOR2			0x006C
+
+/* for parametrized access to layer registers */
+#define MXR_GRAPHIC_CFG(i)		(0x0020 + (i) * 0x20)
+#define MXR_GRAPHIC_BASE(i)		(0x0024 + (i) * 0x20)
+#define MXR_GRAPHIC_SPAN(i)		(0x0028 + (i) * 0x20)
+#define MXR_GRAPHIC_SXY(i)		(0x002C + (i) * 0x20)
+#define MXR_GRAPHIC_WH(i)		(0x0030 + (i) * 0x20)
+#define MXR_GRAPHIC_DXY(i)		(0x0034 + (i) * 0x20)
+
+/*
+ * Bit definition part
+ */
+
+/* generates mask for range of bits */
+#define MXR_MASK(high_bit, low_bit) \
+	(((2 << ((high_bit) - (low_bit))) - 1) << (low_bit))
+
+#define MXR_MASK_VAL(val, high_bit, low_bit) \
+	(((val) << (low_bit)) & MXR_MASK(high_bit, low_bit))
+
+/* bits for MXR_STATUS */
+#define MXR_STATUS_16_BURST		(1 << 7)
+#define MXR_STATUS_BURST_MASK		(1 << 7)
+#define MXR_STATUS_SYNC_ENABLE		(1 << 2)
+#define MXR_STATUS_REG_RUN		(1 << 0)
+
+/* bits for MXR_CFG */
+#define MXR_CFG_OUT_YUV444		(0 << 8)
+#define MXR_CFG_OUT_RGB888		(1 << 8)
+#define MXR_CFG_DST_SDO			(0 << 7)
+#define MXR_CFG_DST_HDMI		(1 << 7)
+#define MXR_CFG_DST_MASK		(1 << 7)
+#define MXR_CFG_SCAN_HD_720		(0 << 6)
+#define MXR_CFG_SCAN_HD_1080		(1 << 6)
+#define MXR_CFG_GRP1_ENABLE		(1 << 5)
+#define MXR_CFG_GRP0_ENABLE		(1 << 4)
+#define MXR_CFG_VP_ENABLE		(1 << 3)
+#define MXR_CFG_SCAN_INTERLACE		(0 << 2)
+#define MXR_CFG_SCAN_PROGRASSIVE	(1 << 2)
+#define MXR_CFG_SCAN_NTSC		(0 << 1)
+#define MXR_CFG_SCAN_PAL		(1 << 1)
+#define MXR_CFG_SCAN_SD			(0 << 0)
+#define MXR_CFG_SCAN_HD			(1 << 0)
+#define MXR_CFG_SCAN_MASK		0x47
+
+/* bits for MXR_GRAPHICn_CFG */
+#define MXR_GRP_CFG_COLOR_KEY_DISABLE	(1 << 21)
+#define MXR_GRP_CFG_BLEND_PRE_MUL	(1 << 20)
+#define MXR_GRP_CFG_FORMAT_VAL(x)	MXR_MASK_VAL(x, 11, 8)
+#define MXR_GRP_CFG_FORMAT_MASK		MXR_GRP_CFG_FORMAT_VAL(~0)
+#define MXR_GRP_CFG_ALPHA_VAL(x)	MXR_MASK_VAL(x, 7, 0)
+
+/* bits for MXR_GRAPHICn_WH */
+#define MXR_GRP_WH_H_SCALE(x)		MXR_MASK_VAL(x, 28, 28)
+#define MXR_GRP_WH_V_SCALE(x)		MXR_MASK_VAL(x, 12, 12)
+#define MXR_GRP_WH_WIDTH(x)		MXR_MASK_VAL(x, 26, 16)
+#define MXR_GRP_WH_HEIGHT(x)		MXR_MASK_VAL(x, 10, 0)
+
+/* bits for MXR_GRAPHICn_SXY */
+#define MXR_GRP_SXY_SX(x)		MXR_MASK_VAL(x, 26, 16)
+#define MXR_GRP_SXY_SY(x)		MXR_MASK_VAL(x, 10, 0)
+
+/* bits for MXR_GRAPHICn_DXY */
+#define MXR_GRP_DXY_DX(x)		MXR_MASK_VAL(x, 26, 16)
+#define MXR_GRP_DXY_DY(x)		MXR_MASK_VAL(x, 10, 0)
+
+/* bits for MXR_INT_EN */
+#define MXR_INT_EN_VSYNC		(1 << 11)
+#define MXR_INT_EN_ALL			(0x0f << 8)
+
+/* bit for MXR_INT_STATUS */
+#define MXR_INT_CLEAR_VSYNC		(1 << 11)
+#define MXR_INT_STATUS_VSYNC		(1 << 0)
+
+/* bit for MXR_LAYER_CFG */
+#define MXR_LAYER_CFG_GRP1_VAL(x)	MXR_MASK_VAL(x, 11, 8)
+#define MXR_LAYER_CFG_GRP0_VAL(x)	MXR_MASK_VAL(x, 7, 4)
+#define MXR_LAYER_CFG_VP_VAL(x)		MXR_MASK_VAL(x, 3, 0)
+
+#endif /* SAMSUNG_REGS_MIXER_H */
+
diff --git a/drivers/media/video/s5p-tv/regs-sdo.h b/drivers/media/video/s5p-tv/regs-sdo.h
new file mode 100644
index 00000000000..7f7c2b8ac14
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-sdo.h
@@ -0,0 +1,63 @@
+/* drivers/media/video/s5p-tv/regs-sdo.h
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * SDO register description file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SAMSUNG_REGS_SDO_H
+#define SAMSUNG_REGS_SDO_H
+
+/*
+ * Register part
+ */
+
+#define SDO_CLKCON			0x0000
+#define SDO_CONFIG			0x0008
+#define SDO_VBI				0x0014
+#define SDO_DAC				0x003C
+#define SDO_CCCON			0x0180
+#define SDO_IRQ				0x0280
+#define SDO_IRQMASK			0x0284
+#define SDO_VERSION			0x03D8
+
+/*
+ * Bit definition part
+ */
+
+/* SDO Clock Control Register (SDO_CLKCON) */
+#define SDO_TVOUT_SW_RESET		(1 << 4)
+#define SDO_TVOUT_CLOCK_READY		(1 << 1)
+#define SDO_TVOUT_CLOCK_ON		(1 << 0)
+
+/* SDO Video Standard Configuration Register (SDO_CONFIG) */
+#define SDO_PROGRESSIVE			(1 << 4)
+#define SDO_NTSC_M			0
+#define SDO_PAL_M			1
+#define SDO_PAL_BGHID			2
+#define SDO_PAL_N			3
+#define SDO_PAL_NC			4
+#define SDO_NTSC_443			8
+#define SDO_PAL_60			9
+#define SDO_STANDARD_MASK		0xf
+
+/* SDO VBI Configuration Register (SDO_VBI) */
+#define SDO_CVBS_WSS_INS		(1 << 14)
+#define SDO_CVBS_CLOSED_CAPTION_MASK	(3 << 12)
+
+/* SDO DAC Configuration Register (SDO_DAC) */
+#define SDO_POWER_ON_DAC		(1 << 0)
+
+/* SDO Color Compensation On/Off Control (SDO_CCCON) */
+#define SDO_COMPENSATION_BHS_ADJ_OFF	(1 << 4)
+#define SDO_COMPENSATION_CVBS_COMP_OFF	(1 << 0)
+
+/* SDO Interrupt Request Register (SDO_IRQ) */
+#define SDO_VSYNC_IRQ_PEND		(1 << 0)
+
+#endif /* SAMSUNG_REGS_SDO_H */
diff --git a/drivers/media/video/s5p-tv/regs-vp.h b/drivers/media/video/s5p-tv/regs-vp.h
new file mode 100644
index 00000000000..6c63984e11e
--- /dev/null
+++ b/drivers/media/video/s5p-tv/regs-vp.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Video processor register header file for Samsung Mixer driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef SAMSUNG_REGS_VP_H
+#define SAMSUNG_REGS_VP_H
+
+/*
+ * Register part
+ */
+
+#define VP_ENABLE			0x0000
+#define VP_SRESET			0x0004
+#define VP_SHADOW_UPDATE		0x0008
+#define VP_FIELD_ID			0x000C
+#define VP_MODE				0x0010
+#define VP_IMG_SIZE_Y			0x0014
+#define VP_IMG_SIZE_C			0x0018
+#define VP_PER_RATE_CTRL		0x001C
+#define VP_TOP_Y_PTR			0x0028
+#define VP_BOT_Y_PTR			0x002C
+#define VP_TOP_C_PTR			0x0030
+#define VP_BOT_C_PTR			0x0034
+#define VP_ENDIAN_MODE			0x03CC
+#define VP_SRC_H_POSITION		0x0044
+#define VP_SRC_V_POSITION		0x0048
+#define VP_SRC_WIDTH			0x004C
+#define VP_SRC_HEIGHT			0x0050
+#define VP_DST_H_POSITION		0x0054
+#define VP_DST_V_POSITION		0x0058
+#define VP_DST_WIDTH			0x005C
+#define VP_DST_HEIGHT			0x0060
+#define VP_H_RATIO			0x0064
+#define VP_V_RATIO			0x0068
+#define VP_POLY8_Y0_LL			0x006C
+#define VP_POLY4_Y0_LL			0x00EC
+#define VP_POLY4_C0_LL			0x012C
+
+/*
+ * Bit definition part
+ */
+
+/* generates mask for range of bits */
+
+#define VP_MASK(high_bit, low_bit) \
+	(((2 << ((high_bit) - (low_bit))) - 1) << (low_bit))
+
+#define VP_MASK_VAL(val, high_bit, low_bit) \
+	(((val) << (low_bit)) & VP_MASK(high_bit, low_bit))
+
+ /* VP_ENABLE */
+#define VP_ENABLE_ON			(1 << 0)
+
+/* VP_SRESET */
+#define VP_SRESET_PROCESSING		(1 << 0)
+
+/* VP_SHADOW_UPDATE */
+#define VP_SHADOW_UPDATE_ENABLE		(1 << 0)
+
+/* VP_MODE */
+#define VP_MODE_NV12			(0 << 6)
+#define VP_MODE_NV21			(1 << 6)
+#define VP_MODE_LINE_SKIP		(1 << 5)
+#define VP_MODE_MEM_LINEAR		(0 << 4)
+#define VP_MODE_MEM_TILED		(1 << 4)
+#define VP_MODE_FMT_MASK		(5 << 4)
+#define VP_MODE_FIELD_ID_AUTO_TOGGLING	(1 << 2)
+#define VP_MODE_2D_IPC			(1 << 1)
+
+/* VP_IMG_SIZE_Y */
+/* VP_IMG_SIZE_C */
+#define VP_IMG_HSIZE(x)			VP_MASK_VAL(x, 29, 16)
+#define VP_IMG_VSIZE(x)			VP_MASK_VAL(x, 13, 0)
+
+/* VP_SRC_H_POSITION */
+#define VP_SRC_H_POSITION_VAL(x)	VP_MASK_VAL(x, 14, 4)
+
+/* VP_ENDIAN_MODE */
+#define VP_ENDIAN_MODE_LITTLE		(1 << 0)
+
+#endif /* SAMSUNG_REGS_VP_H */
diff --git a/drivers/media/video/s5p-tv/sdo_drv.c b/drivers/media/video/s5p-tv/sdo_drv.c
new file mode 100644
index 00000000000..4dddd6bd635
--- /dev/null
+++ b/drivers/media/video/s5p-tv/sdo_drv.c
@@ -0,0 +1,479 @@
+/*
+ * Samsung Standard Definition Output (SDO) driver
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *
+ * Tomasz Stanislawski, <t.stanislaws@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundiation. either version 2 of the License,
+ * or (at your option) any later version
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-subdev.h>
+
+#include "regs-sdo.h"
+
+MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
+MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)");
+MODULE_LICENSE("GPL");
+
+#define SDO_DEFAULT_STD	V4L2_STD_PAL
+
+struct sdo_format {
+	v4l2_std_id id;
+	/* all modes are 720 pixels wide */
+	unsigned int height;
+	unsigned int cookie;
+};
+
+struct sdo_device {
+	/** pointer to device parent */
+	struct device *dev;
+	/** base address of SDO registers */
+	void __iomem *regs;
+	/** SDO interrupt */
+	unsigned int irq;
+	/** DAC source clock */
+	struct clk *sclk_dac;
+	/** DAC clock */
+	struct clk *dac;
+	/** DAC physical interface */
+	struct clk *dacphy;
+	/** clock for control of VPLL */
+	struct clk *fout_vpll;
+	/** regulator for SDO IP power */
+	struct regulator *vdac;
+	/** regulator for SDO plug detection */
+	struct regulator *vdet;
+	/** subdev used as device interface */
+	struct v4l2_subdev sd;
+	/** current format */
+	const struct sdo_format *fmt;
+};
+
+static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct sdo_device, sd);
+}
+
+static inline
+void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask)
+{
+	u32 old = readl(sdev->regs + reg_id);
+	value = (value & mask) | (old & ~mask);
+	writel(value, sdev->regs + reg_id);
+}
+
+static inline
+void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value)
+{
+	writel(value, sdev->regs + reg_id);
+}
+
+static inline
+u32 sdo_read(struct sdo_device *sdev, u32 reg_id)
+{
+	return readl(sdev->regs + reg_id);
+}
+
+static irqreturn_t sdo_irq_handler(int irq, void *dev_data)
+{
+	struct sdo_device *sdev = dev_data;
+
+	/* clear interrupt */
+	sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND);
+	return IRQ_HANDLED;
+}
+
+static void sdo_reg_debug(struct sdo_device *sdev)
+{
+#define DBGREG(reg_id) \
+	dev_info(sdev->dev, #reg_id " = %08x\n", \
+		sdo_read(sdev, reg_id))
+
+	DBGREG(SDO_CLKCON);
+	DBGREG(SDO_CONFIG);
+	DBGREG(SDO_VBI);
+	DBGREG(SDO_DAC);
+	DBGREG(SDO_IRQ);
+	DBGREG(SDO_IRQMASK);
+	DBGREG(SDO_VERSION);
+}
+
+static const struct sdo_format sdo_format[] = {
+	{ V4L2_STD_PAL_N,	.height = 576, .cookie = SDO_PAL_N },
+	{ V4L2_STD_PAL_Nc,	.height = 576, .cookie = SDO_PAL_NC },
+	{ V4L2_STD_PAL_M,	.height = 480, .cookie = SDO_PAL_M },
+	{ V4L2_STD_PAL_60,	.height = 480, .cookie = SDO_PAL_60 },
+	{ V4L2_STD_NTSC_443,	.height = 480, .cookie = SDO_NTSC_443 },
+	{ V4L2_STD_PAL,		.height = 576, .cookie = SDO_PAL_BGHID },
+	{ V4L2_STD_NTSC_M,	.height = 480, .cookie = SDO_NTSC_M },
+};
+
+static const struct sdo_format *sdo_find_format(v4l2_std_id id)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(sdo_format); ++i)
+		if (sdo_format[i].id & id)
+			return &sdo_format[i];
+	return NULL;
+}
+
+static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	*std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL |
+		V4L2_STD_PAL_N | V4L2_STD_PAL_Nc |
+		V4L2_STD_NTSC_443 | V4L2_STD_PAL_60;
+	return 0;
+}
+
+static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	const struct sdo_format *fmt;
+	fmt = sdo_find_format(std);
+	if (fmt == NULL)
+		return -EINVAL;
+	sdev->fmt = fmt;
+	return 0;
+}
+
+static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	*std = sd_to_sdev(sd)->fmt->id;
+	return 0;
+}
+
+static int sdo_g_mbus_fmt(struct v4l2_subdev *sd,
+	struct v4l2_mbus_framefmt *fmt)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	if (!sdev->fmt)
+		return -ENXIO;
+	/* all modes are 720 pixels wide */
+	fmt->width = 720;
+	fmt->height = sdev->fmt->height;
+	fmt->code = V4L2_MBUS_FMT_FIXED;
+	fmt->field = V4L2_FIELD_INTERLACED;
+	return 0;
+}
+
+static int sdo_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	struct device *dev = sdev->dev;
+	int ret;
+
+	dev_info(dev, "sdo_s_power(%d)\n", on);
+
+	if (on)
+		ret = pm_runtime_get_sync(dev);
+	else
+		ret = pm_runtime_put_sync(dev);
+
+	/* only values < 0 indicate errors */
+	return IS_ERR_VALUE(ret) ? ret : 0;
+}
+
+static int sdo_streamon(struct sdo_device *sdev)
+{
+	/* set proper clock for Timing Generator */
+	clk_set_rate(sdev->fout_vpll, 54000000);
+	dev_info(sdev->dev, "fout_vpll.rate = %lu\n",
+	clk_get_rate(sdev->fout_vpll));
+	/* enable clock in SDO */
+	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
+	clk_enable(sdev->dacphy);
+	/* enable DAC */
+	sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
+	sdo_reg_debug(sdev);
+	return 0;
+}
+
+static int sdo_streamoff(struct sdo_device *sdev)
+{
+	int tries;
+
+	sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
+	clk_disable(sdev->dacphy);
+	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
+	for (tries = 100; tries; --tries) {
+		if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
+			break;
+		mdelay(1);
+	}
+	if (tries == 0)
+		dev_err(sdev->dev, "failed to stop streaming\n");
+	return tries ? 0 : -EIO;
+}
+
+static int sdo_s_stream(struct v4l2_subdev *sd, int on)
+{
+	struct sdo_device *sdev = sd_to_sdev(sd);
+	return on ? sdo_streamon(sdev) : sdo_streamoff(sdev);
+}
+
+static const struct v4l2_subdev_core_ops sdo_sd_core_ops = {
+	.s_power = sdo_s_power,
+};
+
+static const struct v4l2_subdev_video_ops sdo_sd_video_ops = {
+	.s_std_output = sdo_s_std_output,
+	.g_std_output = sdo_g_std_output,
+	.g_tvnorms_output = sdo_g_tvnorms_output,
+	.g_mbus_fmt = sdo_g_mbus_fmt,
+	.s_stream = sdo_s_stream,
+};
+
+static const struct v4l2_subdev_ops sdo_sd_ops = {
+	.core = &sdo_sd_core_ops,
+	.video = &sdo_sd_video_ops,
+};
+
+static int sdo_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	dev_info(dev, "suspend\n");
+	regulator_disable(sdev->vdet);
+	regulator_disable(sdev->vdac);
+	clk_disable(sdev->sclk_dac);
+	return 0;
+}
+
+static int sdo_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	dev_info(dev, "resume\n");
+	clk_enable(sdev->sclk_dac);
+	regulator_enable(sdev->vdac);
+	regulator_enable(sdev->vdet);
+
+	/* software reset */
+	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET);
+	mdelay(10);
+	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET);
+
+	/* setting TV mode */
+	sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK);
+	/* XXX: forcing interlaced mode using undocumented bit */
+	sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE);
+	/* turn all VBI off */
+	sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS |
+		SDO_CVBS_CLOSED_CAPTION_MASK);
+	/* turn all post processing off */
+	sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF |
+		SDO_COMPENSATION_CVBS_COMP_OFF);
+	sdo_reg_debug(sdev);
+	return 0;
+}
+
+static const struct dev_pm_ops sdo_pm_ops = {
+	.runtime_suspend = sdo_runtime_suspend,
+	.runtime_resume	 = sdo_runtime_resume,
+};
+
+static int __devinit sdo_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sdo_device *sdev;
+	struct resource *res;
+	int ret = 0;
+	struct clk *sclk_vpll;
+
+	dev_info(dev, "probe start\n");
+	sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+	if (!sdev) {
+		dev_err(dev, "not enough memory.\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+	sdev->dev = dev;
+
+	/* mapping registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "get memory resource failed.\n");
+		ret = -ENXIO;
+		goto fail_sdev;
+	}
+
+	sdev->regs = ioremap(res->start, resource_size(res));
+	if (sdev->regs == NULL) {
+		dev_err(dev, "register mapping failed.\n");
+		ret = -ENXIO;
+		goto fail_sdev;
+	}
+
+	/* acquiring interrupt */
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(dev, "get interrupt resource failed.\n");
+		ret = -ENXIO;
+		goto fail_regs;
+	}
+	ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev);
+	if (ret) {
+		dev_err(dev, "request interrupt failed.\n");
+		goto fail_regs;
+	}
+	sdev->irq = res->start;
+
+	/* acquire clocks */
+	sdev->sclk_dac = clk_get(dev, "sclk_dac");
+	if (IS_ERR_OR_NULL(sdev->sclk_dac)) {
+		dev_err(dev, "failed to get clock 'sclk_dac'\n");
+		ret = -ENXIO;
+		goto fail_irq;
+	}
+	sdev->dac = clk_get(dev, "dac");
+	if (IS_ERR_OR_NULL(sdev->dac)) {
+		dev_err(dev, "failed to get clock 'dac'\n");
+		ret = -ENXIO;
+		goto fail_sclk_dac;
+	}
+	sdev->dacphy = clk_get(dev, "dacphy");
+	if (IS_ERR_OR_NULL(sdev->dacphy)) {
+		dev_err(dev, "failed to get clock 'dacphy'\n");
+		ret = -ENXIO;
+		goto fail_dac;
+	}
+	sclk_vpll = clk_get(dev, "sclk_vpll");
+	if (IS_ERR_OR_NULL(sclk_vpll)) {
+		dev_err(dev, "failed to get clock 'sclk_vpll'\n");
+		ret = -ENXIO;
+		goto fail_dacphy;
+	}
+	clk_set_parent(sdev->sclk_dac, sclk_vpll);
+	clk_put(sclk_vpll);
+	sdev->fout_vpll = clk_get(dev, "fout_vpll");
+	if (IS_ERR_OR_NULL(sdev->fout_vpll)) {
+		dev_err(dev, "failed to get clock 'fout_vpll'\n");
+		goto fail_dacphy;
+	}
+	dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll));
+
+	/* acquire regulator */
+	sdev->vdac = regulator_get(dev, "vdd33a_dac");
+	if (IS_ERR_OR_NULL(sdev->vdac)) {
+		dev_err(dev, "failed to get regulator 'vdac'\n");
+		goto fail_fout_vpll;
+	}
+	sdev->vdet = regulator_get(dev, "vdet");
+	if (IS_ERR_OR_NULL(sdev->vdet)) {
+		dev_err(dev, "failed to get regulator 'vdet'\n");
+		goto fail_vdac;
+	}
+
+	/* enable gate for dac clock, because mixer uses it */
+	clk_enable(sdev->dac);
+
+	/* configure power management */
+	pm_runtime_enable(dev);
+
+	/* configuration of interface subdevice */
+	v4l2_subdev_init(&sdev->sd, &sdo_sd_ops);
+	sdev->sd.owner = THIS_MODULE;
+	strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name);
+
+	/* set default format */
+	sdev->fmt = sdo_find_format(SDO_DEFAULT_STD);
+	BUG_ON(sdev->fmt == NULL);
+
+	/* keeping subdev in device's private for use by other drivers */
+	dev_set_drvdata(dev, &sdev->sd);
+
+	dev_info(dev, "probe succeeded\n");
+	return 0;
+
+fail_vdac:
+	regulator_put(sdev->vdac);
+fail_fout_vpll:
+	clk_put(sdev->fout_vpll);
+fail_dacphy:
+	clk_put(sdev->dacphy);
+fail_dac:
+	clk_put(sdev->dac);
+fail_sclk_dac:
+	clk_put(sdev->sclk_dac);
+fail_irq:
+	free_irq(sdev->irq, sdev);
+fail_regs:
+	iounmap(sdev->regs);
+fail_sdev:
+	kfree(sdev);
+fail:
+	dev_info(dev, "probe failed\n");
+	return ret;
+}
+
+static int __devexit sdo_remove(struct platform_device *pdev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
+	struct sdo_device *sdev = sd_to_sdev(sd);
+
+	pm_runtime_disable(&pdev->dev);
+	clk_disable(sdev->dac);
+	regulator_put(sdev->vdet);
+	regulator_put(sdev->vdac);
+	clk_put(sdev->fout_vpll);
+	clk_put(sdev->dacphy);
+	clk_put(sdev->dac);
+	clk_put(sdev->sclk_dac);
+	free_irq(sdev->irq, sdev);
+	iounmap(sdev->regs);
+	kfree(sdev);
+
+	dev_info(&pdev->dev, "remove successful\n");
+	return 0;
+}
+
+static struct platform_driver sdo_driver __refdata = {
+	.probe = sdo_probe,
+	.remove = __devexit_p(sdo_remove),
+	.driver = {
+		.name = "s5p-sdo",
+		.owner = THIS_MODULE,
+		.pm = &sdo_pm_ops,
+	}
+};
+
+static int __init sdo_init(void)
+{
+	int ret;
+	static const char banner[] __initdata = KERN_INFO \
+		"Samsung Standard Definition Output (SDO) driver, "
+		"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
+	printk(banner);
+
+	ret = platform_driver_register(&sdo_driver);
+	if (ret)
+		printk(KERN_ERR "SDO platform driver register failed\n");
+
+	return ret;
+}
+module_init(sdo_init);
+
+static void __exit sdo_exit(void)
+{
+	platform_driver_unregister(&sdo_driver);
+}
+module_exit(sdo_exit);
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 0db90922ee9..f2ae405c74a 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -757,8 +757,8 @@ static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 	switch (ctrl->id) {
 	case V4L2_CID_CHROMA_AGC:
 		/* chroma gain cluster */
-		if (state->agc->cur.val)
-			state->gain->cur.val =
+		if (state->agc->val)
+			state->gain->val =
 				saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
 		break;
 	}
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e2062b240e3..0f9fb99adeb 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -4951,8 +4951,9 @@ struct saa7134_board saa7134_boards[] = {
 		.audio_clock    = 0x00187de7,
 		.tuner_type     = TUNER_XC2028,
 		.radio_type     = UNSET,
-		.tuner_addr	= ADDR_UNSET,
+		.tuner_addr	= 0x61,
 		.radio_addr	= ADDR_UNSET,
+		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs = {{
 			.name   = name_tv,
 			.vmux   = 3,
@@ -6992,6 +6993,11 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev,
 			msleep(10);
 			saa7134_set_gpio(dev, 18, 1);
 		break;
+		case SAA7134_BOARD_VIDEOMATE_T750:
+			saa7134_set_gpio(dev, 20, 0);
+			msleep(10);
+			saa7134_set_gpio(dev, 20, 1);
+		break;
 		}
 	return 0;
 	}
@@ -7451,6 +7457,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x0e050000, 0x0c050000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0e050000, 0x0c050000);
 		break;
+	case SAA7134_BOARD_VIDEOMATE_T750:
+		/* enable the analog tuner */
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00008000, 0x00008000);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000);
+		break;
 	}
 	return 0;
 }
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index f9be737ba6f..ca65cda3e10 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -39,6 +39,8 @@
 MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(SAA7134_VERSION);
+
 
 /* ------------------------------------------------------------------ */
 
@@ -1332,14 +1334,8 @@ static struct pci_driver saa7134_pci_driver = {
 static int __init saa7134_init(void)
 {
 	INIT_LIST_HEAD(&saa7134_devlist);
-	printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n",
-	       (SAA7134_VERSION_CODE >> 16) & 0xff,
-	       (SAA7134_VERSION_CODE >>  8) & 0xff,
-	       SAA7134_VERSION_CODE & 0xff);
-#ifdef SNAPSHOT
-	printk(KERN_INFO "saa7130/34: snapshot date %04d-%02d-%02d\n",
-	       SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
-#endif
+	printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n",
+	       SAA7134_VERSION);
 	return pci_register_driver(&saa7134_pci_driver);
 }
 
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 996a206c6d7..1e4ef166988 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -56,6 +56,7 @@
 #include "lgs8gxx.h"
 
 #include "zl10353.h"
+#include "qt1010.h"
 
 #include "zl10036.h"
 #include "zl10039.h"
@@ -939,6 +940,18 @@ static struct zl10353_config behold_x7_config = {
 	.disable_i2c_gate_ctrl = 1,
 };
 
+static struct zl10353_config videomate_t750_zl10353_config = {
+	.demod_address         = 0x0f,
+	.no_tuner              = 1,
+	.parallel_ts           = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
+static struct qt1010_config videomate_t750_qt1010_config = {
+	.i2c_address = 0x62
+};
+
+
 /* ==================================================================
  * tda10086 based DVB-S cards, helper functions
  */
@@ -1650,6 +1663,18 @@ static int dvb_init(struct saa7134_dev *dev)
 					__func__);
 
 		break;
+	case SAA7134_BOARD_VIDEOMATE_T750:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+						&videomate_t750_zl10353_config,
+						&dev->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			if (dvb_attach(qt1010_attach,
+					fe0->dvb.frontend,
+					&dev->i2c_adap,
+					&videomate_t750_qt1010_config) == NULL)
+				wprintk("error attaching QT1010\n");
+		}
+		break;
 	case SAA7134_BOARD_ZOLID_HYBRID_PCI:
 		fe0->dvb.frontend = dvb_attach(tda10048_attach,
 					       &zolid_tda10048_config,
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 18294db38a0..dde361a9194 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -172,7 +172,6 @@ static int empress_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, saa7134_boards[dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = SAA7134_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_READWRITE |
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index 776ba2dd7f9..9cf7914f6f9 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1810,7 +1810,6 @@ static int saa7134_querycap(struct file *file, void  *priv,
 	strlcpy(cap->card, saa7134_boards[dev->board].name,
 		sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = SAA7134_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_VBI_CAPTURE |
@@ -2307,7 +2306,6 @@ static int radio_querycap(struct file *file, void *priv,
 	strcpy(cap->driver, "saa7134");
 	strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card));
 	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
-	cap->version = SAA7134_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_TUNER;
 	return 0;
 }
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 28eb1039832..bc8d6bba8ee 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -19,8 +19,7 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
-#define SAA7134_VERSION_CODE KERNEL_VERSION(0, 2, 16)
+#define SAA7134_VERSION "0, 2, 17"
 
 #include <linux/pci.h>
 #include <linux/i2c.h>
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index 400364569c8..2fd38a01887 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -1246,7 +1246,6 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	struct saa7164_encoder_fh *fh =
 		(struct saa7164_encoder_fh *)file->private_data;
 	struct saa7164_port *port = fh->port;
-	struct saa7164_user_buffer *ubuf;
 	unsigned int mask = 0;
 
 	port->last_poll_msecs_diff = port->last_poll_msecs;
@@ -1278,10 +1277,7 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	}
 
 	/* Pull the first buffer from the used list */
-	ubuf = list_first_entry(&port->list_buf_used.list,
-		struct saa7164_user_buffer, list);
-
-	if (ubuf)
+	if (!list_empty(&port->list_buf_used.list))
 		mask |= POLLIN | POLLRDNORM;
 
 	return mask;
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index bc1fcedba87..e2e03415871 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -1192,7 +1192,6 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 {
 	struct saa7164_vbi_fh *fh = (struct saa7164_vbi_fh *)file->private_data;
 	struct saa7164_port *port = fh->port;
-	struct saa7164_user_buffer *ubuf;
 	unsigned int mask = 0;
 
 	port->last_poll_msecs_diff = port->last_poll_msecs;
@@ -1224,10 +1223,7 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	}
 
 	/* Pull the first buffer from the used list */
-	ubuf = list_first_entry(&port->list_buf_used.list,
-		struct saa7164_user_buffer, list);
-
-	if (ubuf)
+	if (!list_empty(&port->list_buf_used.list))
 		mask |= POLLIN | POLLRDNORM;
 
 	return mask;
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 16745d2fb34..6678bf1e781 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -48,7 +48,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/kdev_t.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/crc32.h>
 #include <linux/kthread.h>
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 3ae5c9c58cb..e54089802b6 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -27,7 +27,6 @@
 #include <linux/mm.h>
 #include <linux/moduleparam.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
@@ -39,6 +38,7 @@
 #include <media/v4l2-dev.h>
 #include <media/soc_camera.h>
 #include <media/sh_mobile_ceu.h>
+#include <media/sh_mobile_csi2.h>
 #include <media/videobuf2-dma-contig.h>
 #include <media/v4l2-mediabus.h>
 #include <media/soc_mediabus.h>
@@ -96,6 +96,7 @@ struct sh_mobile_ceu_buffer {
 struct sh_mobile_ceu_dev {
 	struct soc_camera_host ici;
 	struct soc_camera_device *icd;
+	struct platform_device *csi2_pdev;
 
 	unsigned int irq;
 	void __iomem *base;
@@ -205,7 +206,7 @@ static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev)
 
 
 	if (2 != success) {
-		dev_warn(&icd->dev, "soft reset time out\n");
+		dev_warn(icd->pdev, "soft reset time out\n");
 		return -EIO;
 	}
 
@@ -220,7 +221,7 @@ static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
 			unsigned long sizes[], void *alloc_ctxs[])
 {
 	struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
 						icd->current_fmt->host_fmt);
@@ -242,7 +243,7 @@ static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
 			*count = pcdev->video_limit / PAGE_ALIGN(sizes[0]);
 	}
 
-	dev_dbg(icd->dev.parent, "count=%d, size=%lu\n", *count, sizes[0]);
+	dev_dbg(icd->parent, "count=%d, size=%lu\n", *count, sizes[0]);
 
 	return 0;
 }
@@ -351,7 +352,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 
 	buf = to_ceu_vb(vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
 		vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
 
 	/* Added list head initialization on alloc */
@@ -371,7 +372,7 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 	size = icd->user_height * bytes_per_line;
 
 	if (vb2_plane_size(vb, 0) < size) {
-		dev_err(icd->dev.parent, "Buffer too small (%lu < %lu)\n",
+		dev_err(icd->parent, "Buffer too small (%lu < %lu)\n",
 			vb2_plane_size(vb, 0), size);
 		return -ENOBUFS;
 	}
@@ -384,11 +385,11 @@ static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
 static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
 
-	dev_dbg(icd->dev.parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
+	dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
 		vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
 
 	spin_lock_irq(&pcdev->lock);
@@ -409,7 +410,7 @@ static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb)
 static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
 {
 	struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 
@@ -421,8 +422,12 @@ static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
 		pcdev->active = NULL;
 	}
 
-	/* Doesn't hurt also if the list is empty */
-	list_del_init(&buf->queue);
+	/*
+	 * Doesn't hurt also if the list is empty, but it hurts, if queuing the
+	 * buffer failed, and .buf_init() hasn't been called
+	 */
+	if (buf->queue.next)
+		list_del_init(&buf->queue);
 
 	spin_unlock_irq(&pcdev->lock);
 }
@@ -437,7 +442,7 @@ static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb)
 static int sh_mobile_ceu_stop_streaming(struct vb2_queue *q)
 {
 	struct soc_camera_device *icd = container_of(q, struct soc_camera_device, vb2_vidq);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct list_head *buf_head, *tmp;
 
@@ -499,25 +504,48 @@ out:
 	return IRQ_HANDLED;
 }
 
+static struct v4l2_subdev *find_csi2(struct sh_mobile_ceu_dev *pcdev)
+{
+	struct v4l2_subdev *sd;
+
+	if (!pcdev->csi2_pdev)
+		return NULL;
+
+	v4l2_device_for_each_subdev(sd, &pcdev->ici.v4l2_dev)
+		if (&pcdev->csi2_pdev->dev == v4l2_get_subdevdata(sd))
+			return sd;
+
+	return NULL;
+}
+
 /* Called with .video_lock held */
 static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	struct v4l2_subdev *csi2_sd;
 	int ret;
 
 	if (pcdev->icd)
 		return -EBUSY;
 
-	dev_info(icd->dev.parent,
+	dev_info(icd->parent,
 		 "SuperH Mobile CEU driver attached to camera %d\n",
 		 icd->devnum);
 
 	pm_runtime_get_sync(ici->v4l2_dev.dev);
 
 	ret = sh_mobile_ceu_soft_reset(pcdev);
-	if (!ret)
+
+	csi2_sd = find_csi2(pcdev);
+
+	ret = v4l2_subdev_call(csi2_sd, core, s_power, 1);
+	if (ret != -ENODEV && ret != -ENOIOCTLCMD && ret < 0) {
+		pm_runtime_put_sync(ici->v4l2_dev.dev);
+	} else {
 		pcdev->icd = icd;
+		ret = 0;
+	}
 
 	return ret;
 }
@@ -525,11 +553,13 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd)
 /* Called with .video_lock held */
 static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
+	struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
 
 	BUG_ON(icd != pcdev->icd);
 
+	v4l2_subdev_call(csi2_sd, core, s_power, 0);
 	/* disable capture, disable interrupts */
 	ceu_write(pcdev, CEIER, 0);
 	sh_mobile_ceu_soft_reset(pcdev);
@@ -545,7 +575,7 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd)
 
 	pm_runtime_put_sync(ici->v4l2_dev.dev);
 
-	dev_info(icd->dev.parent,
+	dev_info(icd->parent,
 		 "SuperH Mobile CEU driver detached from camera %d\n",
 		 icd->devnum);
 
@@ -585,14 +615,14 @@ static u16 calc_scale(unsigned int src, unsigned int *dst)
 /* rect is guaranteed to not exceed the scaled camera rectangle */
 static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	unsigned int height, width, cdwdr_width, in_width, in_height;
 	unsigned int left_offset, top_offset;
 	u32 camor;
 
-	dev_geo(icd->dev.parent, "Crop %ux%u@%u:%u\n",
+	dev_geo(icd->parent, "Crop %ux%u@%u:%u\n",
 		icd->user_width, icd->user_height, cam->ceu_left, cam->ceu_top);
 
 	left_offset	= cam->ceu_left;
@@ -641,7 +671,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 	}
 
 	/* CSI2 special configuration */
-	if (pcdev->pdata->csi2_dev) {
+	if (pcdev->pdata->csi2) {
 		in_width = ((in_width - 2) * 2);
 		left_offset *= 2;
 	}
@@ -649,7 +679,7 @@ static void sh_mobile_ceu_set_rect(struct soc_camera_device *icd)
 	/* Set CAMOR, CAPWR, CFSZR, take care of CDWDR */
 	camor = left_offset | (top_offset << 16);
 
-	dev_geo(icd->dev.parent,
+	dev_geo(icd->parent,
 		"CAMOR 0x%x, CAPWR 0x%x, CFSZR 0x%x, CDWDR 0x%x\n", camor,
 		(in_height << 16) | in_width, (height << 16) | width,
 		cdwdr_width);
@@ -697,7 +727,7 @@ static void capture_restore(struct sh_mobile_ceu_dev *pcdev, u32 capsr)
 static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 				       __u32 pixfmt)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int ret;
 	unsigned long camera_flags, common_flags, value;
@@ -783,7 +813,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	value |= pcdev->is_16bit ? 1 << 12 : 0;
 
 	/* CSI2 mode */
-	if (pcdev->pdata->csi2_dev)
+	if (pcdev->pdata->csi2)
 		value |= 3 << 12;
 
 	ceu_write(pcdev, CAMCR, value);
@@ -806,7 +836,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	sh_mobile_ceu_set_rect(icd);
 	mdelay(1);
 
-	dev_geo(icd->dev.parent, "CFLCR 0x%x\n", pcdev->cflcr);
+	dev_geo(icd->parent, "CFLCR 0x%x\n", pcdev->cflcr);
 	ceu_write(pcdev, CFLCR, pcdev->cflcr);
 
 	/*
@@ -829,7 +859,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 	ceu_write(pcdev, CDOCR, value);
 	ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
 
-	dev_dbg(icd->dev.parent, "S_FMT successful for %c%c%c%c %ux%u\n",
+	dev_dbg(icd->parent, "S_FMT successful for %c%c%c%c %ux%u\n",
 		pixfmt & 0xff, (pixfmt >> 8) & 0xff,
 		(pixfmt >> 16) & 0xff, (pixfmt >> 24) & 0xff,
 		icd->user_width, icd->user_height);
@@ -843,7 +873,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
 static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
 				       unsigned char buswidth)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	unsigned long camera_flags, common_flags;
 
@@ -901,7 +931,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int
 				     struct soc_camera_format_xlate *xlate)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	int ret, k, n;
@@ -921,7 +951,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int
 		return 0;
 	}
 
-	if (!pcdev->pdata->csi2_dev) {
+	if (!pcdev->pdata->csi2) {
 		ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
 		if (ret < 0)
 			return 0;
@@ -1244,7 +1274,7 @@ static int client_s_fmt(struct soc_camera_device *icd,
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h;
 	unsigned int max_width, max_height;
 	struct v4l2_cropcap cap;
@@ -1313,7 +1343,7 @@ static int client_scale(struct soc_camera_device *icd,
 			bool ceu_can_scale)
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	struct v4l2_mbus_framefmt mf_tmp = *mf;
 	unsigned int scale_h, scale_v;
 	int ret;
@@ -1363,13 +1393,13 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd,
 				  struct v4l2_crop *a)
 {
 	struct v4l2_rect *rect = &a->c;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct v4l2_crop cam_crop;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_rect *cam_rect = &cam_crop.c;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->dev.parent;
 	struct v4l2_mbus_framefmt mf;
 	unsigned int scale_cam_h, scale_cam_v, scale_ceu_h, scale_ceu_v,
 		out_width, out_height;
@@ -1511,7 +1541,7 @@ static void calculate_client_output(struct soc_camera_device *icd,
 		struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
 {
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
-	struct device *dev = icd->dev.parent;
+	struct device *dev = icd->parent;
 	struct v4l2_rect *cam_subrect = &cam->subrect;
 	unsigned int scale_v, scale_h;
 
@@ -1555,12 +1585,12 @@ static void calculate_client_output(struct soc_camera_device *icd,
 static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
 				 struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct device *dev = icd->parent;
+	struct soc_camera_host *ici = to_soc_camera_host(dev);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	struct sh_mobile_ceu_cam *cam = icd->host_priv;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	struct v4l2_mbus_framefmt mf;
-	struct device *dev = icd->dev.parent;
 	__u32 pixfmt = pix->pixelformat;
 	const struct soc_camera_format_xlate *xlate;
 	/* Keep Compiler Happy */
@@ -1684,12 +1714,12 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	int width, height;
 	int ret;
 
-	dev_geo(icd->dev.parent, "TRY_FMT(pix=0x%x, %ux%u)\n",
+	dev_geo(icd->parent, "TRY_FMT(pix=0x%x, %ux%u)\n",
 		 pixfmt, pix->width, pix->height);
 
 	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
 	if (!xlate) {
-		dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+		dev_warn(icd->parent, "Format %x not found\n", pixfmt);
 		return -EINVAL;
 	}
 
@@ -1701,11 +1731,6 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 	width = pix->width;
 	height = pix->height;
 
-	pix->bytesperline = soc_mbus_bytes_per_line(width, xlate->host_fmt);
-	if ((int)pix->bytesperline < 0)
-		return pix->bytesperline;
-	pix->sizeimage = height * pix->bytesperline;
-
 	/* limit to sensor capabilities */
 	mf.width	= pix->width;
 	mf.height	= pix->height;
@@ -1741,7 +1766,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 							 try_mbus_fmt, &mf);
 			if (ret < 0) {
 				/* Shouldn't actually happen... */
-				dev_err(icd->dev.parent,
+				dev_err(icd->parent,
 					"FIXME: client try_fmt() = %d\n", ret);
 				return ret;
 			}
@@ -1753,7 +1778,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
 			pix->height = height;
 	}
 
-	dev_geo(icd->dev.parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
+	dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
 		__func__, ret, pix->pixelformat, pix->width, pix->height);
 
 	return ret;
@@ -1763,7 +1788,7 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
 				      struct v4l2_crop *a)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	u32 out_width = icd->user_width, out_height = icd->user_height;
 	int ret;
@@ -1775,13 +1800,13 @@ static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd,
 	/* Stop the client */
 	ret = v4l2_subdev_call(sd, video, s_stream, 0);
 	if (ret < 0)
-		dev_warn(icd->dev.parent,
+		dev_warn(icd->parent,
 			 "Client failed to stop the stream: %d\n", ret);
 	else
 		/* Do the crop, if it fails, there's nothing more we can do */
 		sh_mobile_ceu_set_crop(icd, a);
 
-	dev_geo(icd->dev.parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height);
+	dev_geo(icd->parent, "Output after crop: %ux%u\n", icd->user_width, icd->user_height);
 
 	if (icd->user_width != out_width || icd->user_height != out_height) {
 		struct v4l2_format f = {
@@ -1827,7 +1852,6 @@ static int sh_mobile_ceu_querycap(struct soc_camera_host *ici,
 				  struct v4l2_capability *cap)
 {
 	strlcpy(cap->card, "SuperH_Mobile_CEU", sizeof(cap->card));
-	cap->version = KERNEL_VERSION(0, 0, 5);
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1848,7 +1872,7 @@ static int sh_mobile_ceu_init_videobuf(struct vb2_queue *q,
 static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
 				  struct v4l2_control *ctrl)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 	u32 val;
 
@@ -1864,7 +1888,7 @@ static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
 static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd,
 				  struct v4l2_control *ctrl)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct sh_mobile_ceu_dev *pcdev = ici->priv;
 
 	switch (ctrl->id) {
@@ -1950,7 +1974,7 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 		.completion = COMPLETION_INITIALIZER_ONSTACK(wait.completion),
 		.notifier.notifier_call = bus_notify,
 	};
-	struct device *csi2;
+	struct sh_mobile_ceu_companion *csi2;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -2023,26 +2047,61 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 	pcdev->ici.drv_name = dev_name(&pdev->dev);
 	pcdev->ici.ops = &sh_mobile_ceu_host_ops;
 
+	pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
+	if (IS_ERR(pcdev->alloc_ctx)) {
+		err = PTR_ERR(pcdev->alloc_ctx);
+		goto exit_free_clk;
+	}
+
+	err = soc_camera_host_register(&pcdev->ici);
+	if (err)
+		goto exit_free_ctx;
+
 	/* CSI2 interfacing */
-	csi2 = pcdev->pdata->csi2_dev;
+	csi2 = pcdev->pdata->csi2;
 	if (csi2) {
-		wait.dev = csi2;
+		struct platform_device *csi2_pdev =
+			platform_device_alloc("sh-mobile-csi2", csi2->id);
+		struct sh_csi2_pdata *csi2_pdata = csi2->platform_data;
+
+		if (!csi2_pdev) {
+			err = -ENOMEM;
+			goto exit_host_unregister;
+		}
+
+		pcdev->csi2_pdev		= csi2_pdev;
+
+		err = platform_device_add_data(csi2_pdev, csi2_pdata, sizeof(*csi2_pdata));
+		if (err < 0)
+			goto exit_pdev_put;
+
+		csi2_pdata			= csi2_pdev->dev.platform_data;
+		csi2_pdata->v4l2_dev		= &pcdev->ici.v4l2_dev;
+
+		csi2_pdev->resource		= csi2->resource;
+		csi2_pdev->num_resources	= csi2->num_resources;
+
+		err = platform_device_add(csi2_pdev);
+		if (err < 0)
+			goto exit_pdev_put;
+
+		wait.dev = &csi2_pdev->dev;
 
 		err = bus_register_notifier(&platform_bus_type, &wait.notifier);
 		if (err < 0)
-			goto exit_free_clk;
+			goto exit_pdev_unregister;
 
 		/*
 		 * From this point the driver module will not unload, until
 		 * we complete the completion.
 		 */
 
-		if (!csi2->driver) {
+		if (!csi2_pdev->dev.driver) {
 			complete(&wait.completion);
 			/* Either too late, or probing failed */
 			bus_unregister_notifier(&platform_bus_type, &wait.notifier);
 			err = -ENXIO;
-			goto exit_free_clk;
+			goto exit_pdev_unregister;
 		}
 
 		/*
@@ -2051,34 +2110,28 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 		 * the "owner" is safe!
 		 */
 
-		err = try_module_get(csi2->driver->owner);
+		err = try_module_get(csi2_pdev->dev.driver->owner);
 
 		/* Let notifier complete, if it has been locked */
 		complete(&wait.completion);
 		bus_unregister_notifier(&platform_bus_type, &wait.notifier);
 		if (!err) {
 			err = -ENODEV;
-			goto exit_free_clk;
+			goto exit_pdev_unregister;
 		}
 	}
 
-	pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
-	if (IS_ERR(pcdev->alloc_ctx)) {
-		err = PTR_ERR(pcdev->alloc_ctx);
-		goto exit_module_put;
-	}
-
-	err = soc_camera_host_register(&pcdev->ici);
-	if (err)
-		goto exit_free_ctx;
-
 	return 0;
 
+exit_pdev_unregister:
+	platform_device_del(pcdev->csi2_pdev);
+exit_pdev_put:
+	pcdev->csi2_pdev->resource = NULL;
+	platform_device_put(pcdev->csi2_pdev);
+exit_host_unregister:
+	soc_camera_host_unregister(&pcdev->ici);
 exit_free_ctx:
 	vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
-exit_module_put:
-	if (csi2 && csi2->driver)
-		module_put(csi2->driver->owner);
 exit_free_clk:
 	pm_runtime_disable(&pdev->dev);
 	free_irq(pcdev->irq, pcdev);
@@ -2098,7 +2151,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
 	struct sh_mobile_ceu_dev *pcdev = container_of(soc_host,
 					struct sh_mobile_ceu_dev, ici);
-	struct device *csi2 = pcdev->pdata->csi2_dev;
+	struct platform_device *csi2_pdev = pcdev->csi2_pdev;
 
 	soc_camera_host_unregister(soc_host);
 	pm_runtime_disable(&pdev->dev);
@@ -2107,8 +2160,13 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev)
 		dma_release_declared_memory(&pdev->dev);
 	iounmap(pcdev->base);
 	vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
-	if (csi2 && csi2->driver)
-		module_put(csi2->driver->owner);
+	if (csi2_pdev && csi2_pdev->dev.driver) {
+		struct module *csi2_drv = csi2_pdev->dev.driver->owner;
+		platform_device_del(csi2_pdev);
+		csi2_pdev->resource = NULL;
+		platform_device_put(csi2_pdev);
+		module_put(csi2_drv);
+	}
 	kfree(pcdev);
 
 	return 0;
@@ -2158,4 +2216,5 @@ module_exit(sh_mobile_ceu_exit);
 MODULE_DESCRIPTION("SuperH Mobile CEU driver");
 MODULE_AUTHOR("Magnus Damm");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.6");
 MODULE_ALIAS("platform:sh_mobile_ceu");
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
index 98b87481fa9..2893a0134c7 100644
--- a/drivers/media/video/sh_mobile_csi2.c
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 
+#include <media/sh_mobile_ceu.h>
 #include <media/sh_mobile_csi2.h>
 #include <media/soc_camera.h>
 #include <media/v4l2-common.h>
@@ -33,7 +34,6 @@
 struct sh_csi2 {
 	struct v4l2_subdev		subdev;
 	struct list_head		list;
-	struct notifier_block		notifier;
 	unsigned int			irq;
 	void __iomem			*base;
 	struct platform_device		*pdev;
@@ -132,13 +132,6 @@ static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
 	.try_mbus_fmt	= sh_csi2_try_fmt,
 };
 
-static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops;
-
-static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
-	.core	= &sh_csi2_subdev_core_ops,
-	.video	= &sh_csi2_subdev_video_ops,
-};
-
 static void sh_csi2_hwinit(struct sh_csi2 *priv)
 {
 	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
@@ -186,65 +179,84 @@ static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd)
 	return soc_camera_apply_sensor_flags(icl, flags);
 }
 
-static int sh_csi2_notify(struct notifier_block *nb,
-			  unsigned long action, void *data)
+static int sh_csi2_client_connect(struct sh_csi2 *priv)
 {
-	struct device *dev = data;
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct v4l2_device *v4l2_dev = dev_get_drvdata(dev->parent);
-	struct sh_csi2 *priv =
-		container_of(nb, struct sh_csi2, notifier);
 	struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
-	int ret, i;
+	struct v4l2_subdev *sd, *csi2_sd = &priv->subdev;
+	struct soc_camera_device *icd = NULL;
+	struct device *dev = v4l2_get_subdevdata(&priv->subdev);
+	int i;
+
+	v4l2_device_for_each_subdev(sd, csi2_sd->v4l2_dev)
+		if (sd->grp_id) {
+			icd = (struct soc_camera_device *)sd->grp_id;
+			break;
+		}
+
+	if (!icd)
+		return -EINVAL;
 
 	for (i = 0; i < pdata->num_clients; i++)
 		if (&pdata->clients[i].pdev->dev == icd->pdev)
 			break;
 
-	dev_dbg(dev, "%s(%p): action = %lu, found #%d\n", __func__, dev, action, i);
+	dev_dbg(dev, "%s(%p): found #%d\n", __func__, dev, i);
 
 	if (i == pdata->num_clients)
-		return NOTIFY_DONE;
+		return -ENODEV;
 
-	switch (action) {
-	case BUS_NOTIFY_BOUND_DRIVER:
-		snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s",
-			 dev_name(v4l2_dev->dev), ".mipi-csi");
-		priv->subdev.grp_id = (long)icd;
-		ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev);
-		dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
-		if (ret < 0)
-			return NOTIFY_DONE;
+	priv->client = pdata->clients + i;
 
-		priv->client = pdata->clients + i;
+	priv->set_bus_param		= icd->ops->set_bus_param;
+	priv->query_bus_param		= icd->ops->query_bus_param;
+	icd->ops->set_bus_param		= sh_csi2_set_bus_param;
+	icd->ops->query_bus_param	= sh_csi2_query_bus_param;
 
-		priv->set_bus_param		= icd->ops->set_bus_param;
-		priv->query_bus_param		= icd->ops->query_bus_param;
-		icd->ops->set_bus_param		= sh_csi2_set_bus_param;
-		icd->ops->query_bus_param	= sh_csi2_query_bus_param;
+	csi2_sd->grp_id = (long)icd;
 
-		pm_runtime_get_sync(v4l2_get_subdevdata(&priv->subdev));
+	pm_runtime_get_sync(dev);
 
-		sh_csi2_hwinit(priv);
-		break;
-	case BUS_NOTIFY_UNBIND_DRIVER:
-		priv->client = NULL;
+	sh_csi2_hwinit(priv);
 
-		/* Driver is about to be unbound */
-		icd->ops->set_bus_param		= priv->set_bus_param;
-		icd->ops->query_bus_param	= priv->query_bus_param;
-		priv->set_bus_param		= NULL;
-		priv->query_bus_param		= NULL;
+	return 0;
+}
 
-		v4l2_device_unregister_subdev(&priv->subdev);
+static void sh_csi2_client_disconnect(struct sh_csi2 *priv)
+{
+	struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
 
-		pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
-		break;
-	}
+	priv->client = NULL;
+	priv->subdev.grp_id = 0;
 
-	return NOTIFY_OK;
+	/* Driver is about to be unbound */
+	icd->ops->set_bus_param		= priv->set_bus_param;
+	icd->ops->query_bus_param	= priv->query_bus_param;
+	priv->set_bus_param		= NULL;
+	priv->query_bus_param		= NULL;
+
+	pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
 }
 
+static int sh_csi2_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
+
+	if (on)
+		return sh_csi2_client_connect(priv);
+
+	sh_csi2_client_disconnect(priv);
+	return 0;
+}
+
+static struct v4l2_subdev_core_ops sh_csi2_subdev_core_ops = {
+	.s_power	= sh_csi2_s_power,
+};
+
+static struct v4l2_subdev_ops sh_csi2_subdev_ops = {
+	.core	= &sh_csi2_subdev_core_ops,
+	.video	= &sh_csi2_subdev_video_ops,
+};
+
 static __devinit int sh_csi2_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -274,14 +286,6 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->irq = irq;
-	priv->notifier.notifier_call = sh_csi2_notify;
-
-	/* We MUST attach after the MIPI sensor */
-	ret = bus_register_notifier(&soc_camera_bus_type, &priv->notifier);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "CSI2 cannot register notifier\n");
-		goto ernotify;
-	}
 
 	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
 		dev_err(&pdev->dev, "CSI2 register region already claimed\n");
@@ -297,11 +301,17 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev)
 	}
 
 	priv->pdev = pdev;
+	platform_set_drvdata(pdev, priv);
 
 	v4l2_subdev_init(&priv->subdev, &sh_csi2_subdev_ops);
 	v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
 
-	platform_set_drvdata(pdev, priv);
+	snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.mipi-csi",
+		 dev_name(pdata->v4l2_dev->dev));
+	ret = v4l2_device_register_subdev(pdata->v4l2_dev, &priv->subdev);
+	dev_dbg(&pdev->dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret);
+	if (ret < 0)
+		goto esdreg;
 
 	pm_runtime_enable(&pdev->dev);
 
@@ -309,11 +319,11 @@ static __devinit int sh_csi2_probe(struct platform_device *pdev)
 
 	return 0;
 
+esdreg:
+	iounmap(priv->base);
 eremap:
 	release_mem_region(res->start, resource_size(res));
 ereqreg:
-	bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier);
-ernotify:
 	kfree(priv);
 
 	return ret;
@@ -324,7 +334,7 @@ static __devexit int sh_csi2_remove(struct platform_device *pdev)
 	struct sh_csi2 *priv = platform_get_drvdata(pdev);
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
-	bus_unregister_notifier(&soc_camera_bus_type, &priv->notifier);
+	v4l2_device_unregister_subdev(&priv->subdev);
 	pm_runtime_disable(&pdev->dev);
 	iounmap(priv->base);
 	release_mem_region(res->start, resource_size(res));
@@ -335,8 +345,9 @@ static __devexit int sh_csi2_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver __refdata sh_csi2_pdrv = {
-	.remove  = __devexit_p(sh_csi2_remove),
-	.driver  = {
+	.remove	= __devexit_p(sh_csi2_remove),
+	.probe	= sh_csi2_probe,
+	.driver	= {
 		.name	= "sh-mobile-csi2",
 		.owner	= THIS_MODULE,
 	},
@@ -344,7 +355,7 @@ static struct platform_driver __refdata sh_csi2_pdrv = {
 
 static int __init sh_csi2_init(void)
 {
-	return platform_driver_probe(&sh_csi2_pdrv, sh_csi2_probe);
+	return platform_driver_register(&sh_csi2_pdrv);
 }
 
 static void __exit sh_csi2_exit(void)
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index 07cf0c6c7c1..6a729879d89 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -19,7 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 
 #include <media/sh_vou.h>
@@ -393,7 +392,6 @@ static int sh_vou_querycap(struct file *file, void  *priv,
 	dev_dbg(vou_file->vbq.dev, "%s()\n", __func__);
 
 	strlcpy(cap->card, "SuperH VOU", sizeof(cap->card));
-	cap->version = KERNEL_VERSION(0, 1, 0);
 	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
 	return 0;
 }
@@ -1490,4 +1488,5 @@ module_exit(sh_vou_exit);
 MODULE_DESCRIPTION("SuperH VOU driver");
 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1.0");
 MODULE_ALIAS("platform:sh-vou");
diff --git a/drivers/media/video/sn9c102/sn9c102.h b/drivers/media/video/sn9c102/sn9c102.h
index cbfc44433b9..22ea211ab54 100644
--- a/drivers/media/video/sn9c102/sn9c102.h
+++ b/drivers/media/video/sn9c102/sn9c102.h
@@ -21,7 +21,6 @@
 #ifndef _SN9C102_H_
 #define _SN9C102_H_
 
-#include <linux/version.h>
 #include <linux/usb.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 0e07c493e6f..16cb07c5c27 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -33,6 +33,7 @@
 #include <linux/stat.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/version.h>
 #include <linux/page-flags.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
@@ -47,8 +48,7 @@
 #define SN9C102_MODULE_AUTHOR   "(C) 2004-2007 Luca Risolia"
 #define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
 #define SN9C102_MODULE_LICENSE  "GPL"
-#define SN9C102_MODULE_VERSION  "1:1.47pre49"
-#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 1, 47)
+#define SN9C102_MODULE_VERSION  "1:1.48"
 
 /*****************************************************************************/
 
@@ -2158,7 +2158,7 @@ sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg)
 {
 	struct v4l2_capability cap = {
 		.driver = "sn9c102",
-		.version = SN9C102_MODULE_VERSION_CODE,
+		.version = LINUX_VERSION_CODE,
 		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
 				V4L2_CAP_STREAMING,
 	};
@@ -3187,16 +3187,8 @@ static long sn9c102_ioctl_v4l2(struct file *filp,
 	case VIDIOC_S_AUDIO:
 		return sn9c102_vidioc_s_audio(cam, arg);
 
-	case VIDIOC_G_STD:
-	case VIDIOC_S_STD:
-	case VIDIOC_QUERYSTD:
-	case VIDIOC_ENUMSTD:
-	case VIDIOC_QUERYMENU:
-	case VIDIOC_ENUM_FRAMEINTERVALS:
-		return -EINVAL;
-
 	default:
-		return -EINVAL;
+		return -ENOTTY;
 
 	}
 }
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 4e4d4122d9a..5bdfe7e16bc 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -60,14 +60,14 @@ static int soc_camera_power_set(struct soc_camera_device *icd,
 		ret = regulator_bulk_enable(icl->num_regulators,
 					    icl->regulators);
 		if (ret < 0) {
-			dev_err(&icd->dev, "Cannot enable regulators\n");
+			dev_err(icd->pdev, "Cannot enable regulators\n");
 			return ret;
 		}
 
 		if (icl->power)
 			ret = icl->power(icd->pdev, power_on);
 		if (ret < 0) {
-			dev_err(&icd->dev,
+			dev_err(icd->pdev,
 				"Platform failed to power-on the camera.\n");
 
 			regulator_bulk_disable(icl->num_regulators,
@@ -79,7 +79,7 @@ static int soc_camera_power_set(struct soc_camera_device *icd,
 		if (icl->power)
 			ret = icl->power(icd->pdev, 0);
 		if (ret < 0) {
-			dev_err(&icd->dev,
+			dev_err(icd->pdev,
 				"Platform failed to power-off the camera.\n");
 			return ret;
 		}
@@ -87,7 +87,7 @@ static int soc_camera_power_set(struct soc_camera_device *icd,
 		ret = regulator_bulk_disable(icl->num_regulators,
 					     icl->regulators);
 		if (ret < 0) {
-			dev_err(&icd->dev, "Cannot disable regulators\n");
+			dev_err(icd->pdev, "Cannot disable regulators\n");
 			return ret;
 		}
 	}
@@ -147,11 +147,11 @@ EXPORT_SYMBOL(soc_camera_apply_sensor_flags);
 static int soc_camera_try_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	int ret;
 
-	dev_dbg(&icd->dev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
+	dev_dbg(icd->pdev, "TRY_FMT(%c%c%c%c, %ux%u)\n",
 		pixfmtstr(pix->pixelformat), pix->width, pix->height);
 
 	pix->bytesperline = 0;
@@ -199,22 +199,15 @@ static int soc_camera_try_fmt_vid_cap(struct file *file, void *priv,
 static int soc_camera_enum_input(struct file *file, void *priv,
 				 struct v4l2_input *inp)
 {
-	struct soc_camera_device *icd = file->private_data;
-	int ret = 0;
-
 	if (inp->index != 0)
 		return -EINVAL;
 
-	if (icd->ops->enum_input)
-		ret = icd->ops->enum_input(icd, inp);
-	else {
-		/* default is camera */
-		inp->type = V4L2_INPUT_TYPE_CAMERA;
-		inp->std  = V4L2_STD_UNKNOWN;
-		strcpy(inp->name, "Camera");
-	}
+	/* default is camera */
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+	inp->std  = V4L2_STD_UNKNOWN;
+	strcpy(inp->name, "Camera");
 
-	return ret;
+	return 0;
 }
 
 static int soc_camera_g_input(struct file *file, void *priv, unsigned int *i)
@@ -244,7 +237,7 @@ static int soc_camera_enum_fsizes(struct file *file, void *fh,
 					 struct v4l2_frmsizeenum *fsize)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	return ici->ops->enum_fsizes(icd, fsize);
 }
@@ -254,7 +247,7 @@ static int soc_camera_reqbufs(struct file *file, void *priv,
 {
 	int ret;
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -281,7 +274,7 @@ static int soc_camera_querybuf(struct file *file, void *priv,
 			       struct v4l2_buffer *p)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -295,7 +288,7 @@ static int soc_camera_qbuf(struct file *file, void *priv,
 			   struct v4l2_buffer *p)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -312,7 +305,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 			    struct v4l2_buffer *p)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -329,7 +322,7 @@ static int soc_camera_dqbuf(struct file *file, void *priv,
 static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 {
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	unsigned int i, fmts = 0, raw_fmts = 0;
 	int ret;
 	enum v4l2_mbus_pixelcode code;
@@ -363,7 +356,7 @@ static int soc_camera_init_user_formats(struct soc_camera_device *icd)
 	if (!icd->user_formats)
 		return -ENOMEM;
 
-	dev_dbg(&icd->dev, "Found %d supported formats.\n", fmts);
+	dev_dbg(icd->pdev, "Found %d supported formats.\n", fmts);
 
 	/* Second pass - actually fill data formats */
 	fmts = 0;
@@ -395,7 +388,7 @@ egfmt:
 /* Always entered with .video_lock held */
 static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (ici->ops->put_formats)
 		ici->ops->put_formats(icd);
@@ -409,11 +402,11 @@ static void soc_camera_free_user_formats(struct soc_camera_device *icd)
 static int soc_camera_set_fmt(struct soc_camera_device *icd,
 			      struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_pix_format *pix = &f->fmt.pix;
 	int ret;
 
-	dev_dbg(&icd->dev, "S_FMT(%c%c%c%c, %ux%u)\n",
+	dev_dbg(icd->pdev, "S_FMT(%c%c%c%c, %ux%u)\n",
 		pixfmtstr(pix->pixelformat), pix->width, pix->height);
 
 	/* We always call try_fmt() before set_fmt() or set_crop() */
@@ -426,7 +419,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 		return ret;
 	} else if (!icd->current_fmt ||
 		   icd->current_fmt->host_fmt->fourcc != pix->pixelformat) {
-		dev_err(&icd->dev,
+		dev_err(icd->pdev,
 			"Host driver hasn't set up current format correctly!\n");
 		return -EINVAL;
 	}
@@ -440,7 +433,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 	if (ici->ops->init_videobuf)
 		icd->vb_vidq.field = pix->field;
 
-	dev_dbg(&icd->dev, "set width: %d height: %d\n",
+	dev_dbg(icd->pdev, "set width: %d height: %d\n",
 		icd->user_width, icd->user_height);
 
 	/* set physical bus parameters */
@@ -450,9 +443,7 @@ static int soc_camera_set_fmt(struct soc_camera_device *icd,
 static int soc_camera_open(struct file *file)
 {
 	struct video_device *vdev = video_devdata(file);
-	struct soc_camera_device *icd = container_of(vdev->parent,
-						     struct soc_camera_device,
-						     dev);
+	struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct soc_camera_host *ici;
 	int ret;
@@ -461,10 +452,10 @@ static int soc_camera_open(struct file *file)
 		/* No device driver attached */
 		return -ENODEV;
 
-	ici = to_soc_camera_host(icd->dev.parent);
+	ici = to_soc_camera_host(icd->parent);
 
 	if (!try_module_get(ici->ops->owner)) {
-		dev_err(&icd->dev, "Couldn't lock capture bus driver.\n");
+		dev_err(icd->pdev, "Couldn't lock capture bus driver.\n");
 		return -EINVAL;
 	}
 
@@ -495,7 +486,7 @@ static int soc_camera_open(struct file *file)
 
 		ret = ici->ops->add(icd);
 		if (ret < 0) {
-			dev_err(&icd->dev, "Couldn't activate the camera: %d\n", ret);
+			dev_err(icd->pdev, "Couldn't activate the camera: %d\n", ret);
 			goto eiciadd;
 		}
 
@@ -524,7 +515,7 @@ static int soc_camera_open(struct file *file)
 	}
 
 	file->private_data = icd;
-	dev_dbg(&icd->dev, "camera device open\n");
+	dev_dbg(icd->pdev, "camera device open\n");
 
 	return 0;
 
@@ -549,7 +540,7 @@ epower:
 static int soc_camera_close(struct file *file)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	icd->use_count--;
 	if (!icd->use_count) {
@@ -570,7 +561,7 @@ static int soc_camera_close(struct file *file)
 
 	module_put(ici->ops->owner);
 
-	dev_dbg(&icd->dev, "camera device close\n");
+	dev_dbg(icd->pdev, "camera device close\n");
 
 	return 0;
 }
@@ -581,7 +572,7 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
 	struct soc_camera_device *icd = file->private_data;
 	int err = -EINVAL;
 
-	dev_err(&icd->dev, "camera device read not implemented\n");
+	dev_err(icd->pdev, "camera device read not implemented\n");
 
 	return err;
 }
@@ -589,10 +580,10 @@ static ssize_t soc_camera_read(struct file *file, char __user *buf,
 static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	int err;
 
-	dev_dbg(&icd->dev, "mmap called, vma=0x%08lx\n", (unsigned long)vma);
+	dev_dbg(icd->pdev, "mmap called, vma=0x%08lx\n", (unsigned long)vma);
 
 	if (icd->streamer != file)
 		return -EBUSY;
@@ -602,7 +593,7 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
 	else
 		err = vb2_mmap(&icd->vb2_vidq, vma);
 
-	dev_dbg(&icd->dev, "vma start=0x%08lx, size=%ld, ret=%d\n",
+	dev_dbg(icd->pdev, "vma start=0x%08lx, size=%ld, ret=%d\n",
 		(unsigned long)vma->vm_start,
 		(unsigned long)vma->vm_end - (unsigned long)vma->vm_start,
 		err);
@@ -613,13 +604,13 @@ static int soc_camera_mmap(struct file *file, struct vm_area_struct *vma)
 static unsigned int soc_camera_poll(struct file *file, poll_table *pt)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (icd->streamer != file)
 		return -EBUSY;
 
 	if (ici->ops->init_videobuf && list_empty(&icd->vb_vidq.stream)) {
-		dev_err(&icd->dev, "Trying to poll with no queued buffers!\n");
+		dev_err(icd->pdev, "Trying to poll with no queued buffers!\n");
 		return POLLERR;
 	}
 
@@ -659,15 +650,15 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	WARN_ON(priv != file->private_data);
 
 	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		dev_warn(&icd->dev, "Wrong buf-type %d\n", f->type);
+		dev_warn(icd->pdev, "Wrong buf-type %d\n", f->type);
 		return -EINVAL;
 	}
 
 	if (icd->streamer && icd->streamer != file)
 		return -EBUSY;
 
-	if (is_streaming(to_soc_camera_host(icd->dev.parent), icd)) {
-		dev_err(&icd->dev, "S_FMT denied: queue initialised\n");
+	if (is_streaming(to_soc_camera_host(icd->parent), icd)) {
+		dev_err(icd->pdev, "S_FMT denied: queue initialised\n");
 		return -EBUSY;
 	}
 
@@ -716,7 +707,7 @@ static int soc_camera_g_fmt_vid_cap(struct file *file, void *priv,
 	pix->field		= icd->field;
 	pix->pixelformat	= icd->current_fmt->host_fmt->fourcc;
 	pix->colorspace		= icd->colorspace;
-	dev_dbg(&icd->dev, "current_fmt->fourcc: 0x%08x\n",
+	dev_dbg(icd->pdev, "current_fmt->fourcc: 0x%08x\n",
 		icd->current_fmt->host_fmt->fourcc);
 	return 0;
 }
@@ -725,7 +716,7 @@ static int soc_camera_querycap(struct file *file, void  *priv,
 			       struct v4l2_capability *cap)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -737,7 +728,7 @@ static int soc_camera_streamon(struct file *file, void *priv,
 			       enum v4l2_buf_type i)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
@@ -766,7 +757,7 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 {
 	struct soc_camera_device *icd = file->private_data;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	WARN_ON(priv != file->private_data);
 
@@ -794,7 +785,7 @@ static int soc_camera_queryctrl(struct file *file, void *priv,
 				struct v4l2_queryctrl *qc)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	int i;
 
 	WARN_ON(priv != file->private_data);
@@ -825,7 +816,7 @@ static int soc_camera_g_ctrl(struct file *file, void *priv,
 			     struct v4l2_control *ctrl)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
@@ -844,7 +835,7 @@ static int soc_camera_s_ctrl(struct file *file, void *priv,
 			     struct v4l2_control *ctrl)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	int ret;
 
@@ -863,7 +854,7 @@ static int soc_camera_cropcap(struct file *file, void *fh,
 			      struct v4l2_cropcap *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	return ici->ops->cropcap(icd, a);
 }
@@ -872,7 +863,7 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 			     struct v4l2_crop *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	int ret;
 
 	ret = ici->ops->get_crop(icd, a);
@@ -889,7 +880,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 			     struct v4l2_crop *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct v4l2_rect *rect = &a->c;
 	struct v4l2_crop current_crop;
 	int ret;
@@ -897,7 +888,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n",
+	dev_dbg(icd->pdev, "S_CROP(%ux%u@%u:%u)\n",
 		rect->width, rect->height, rect->left, rect->top);
 
 	/* If get_crop fails, we'll let host and / or client drivers decide */
@@ -905,7 +896,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 
 	/* Prohibit window size change with initialised buffers */
 	if (ret < 0) {
-		dev_err(&icd->dev,
+		dev_err(icd->pdev,
 			"S_CROP denied: getting current crop failed\n");
 	} else if ((a->c.width == current_crop.c.width &&
 		    a->c.height == current_crop.c.height) ||
@@ -915,7 +906,7 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	} else if (ici->ops->set_livecrop) {
 		ret = ici->ops->set_livecrop(icd, a);
 	} else {
-		dev_err(&icd->dev,
+		dev_err(icd->pdev,
 			"S_CROP denied: queue initialised and sizes differ\n");
 		ret = -EBUSY;
 	}
@@ -927,7 +918,7 @@ static int soc_camera_g_parm(struct file *file, void *fh,
 			     struct v4l2_streamparm *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (ici->ops->get_parm)
 		return ici->ops->get_parm(icd, a);
@@ -939,7 +930,7 @@ static int soc_camera_s_parm(struct file *file, void *fh,
 			     struct v4l2_streamparm *a)
 {
 	struct soc_camera_device *icd = file->private_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 
 	if (ici->ops->set_parm)
 		return ici->ops->set_parm(icd, a);
@@ -976,6 +967,8 @@ static int soc_camera_s_register(struct file *file, void *fh,
 }
 #endif
 
+static int soc_camera_probe(struct soc_camera_device *icd);
+
 /* So far this function cannot fail */
 static void scan_add_host(struct soc_camera_host *ici)
 {
@@ -986,15 +979,9 @@ static void scan_add_host(struct soc_camera_host *ici)
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->iface == ici->nr) {
 			int ret;
-			icd->dev.parent = ici->v4l2_dev.dev;
-			dev_set_name(&icd->dev, "%u-%u", icd->iface,
-				     icd->devnum);
-			ret = device_register(&icd->dev);
-			if (ret < 0) {
-				icd->dev.parent = NULL;
-				dev_err(&icd->dev,
-					"Cannot register device: %d\n", ret);
-			}
+
+			icd->parent = ici->v4l2_dev.dev;
+			ret = soc_camera_probe(icd);
 		}
 	}
 
@@ -1006,12 +993,12 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 			       struct soc_camera_link *icl)
 {
 	struct i2c_client *client;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct i2c_adapter *adap = i2c_get_adapter(icl->i2c_adapter_id);
 	struct v4l2_subdev *subdev;
 
 	if (!adap) {
-		dev_err(&icd->dev, "Cannot get I2C adapter #%d. No driver?\n",
+		dev_err(icd->pdev, "Cannot get I2C adapter #%d. No driver?\n",
 			icl->i2c_adapter_id);
 		goto ei2cga;
 	}
@@ -1026,7 +1013,7 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 	client = v4l2_get_subdevdata(subdev);
 
 	/* Use to_i2c_client(dev) to recover the i2c client */
-	dev_set_drvdata(&icd->dev, &client->dev);
+	icd->control = &client->dev;
 
 	return 0;
 ei2cnd:
@@ -1040,7 +1027,8 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 	struct i2c_client *client =
 		to_i2c_client(to_soc_camera_control(icd));
 	struct i2c_adapter *adap = client->adapter;
-	dev_set_drvdata(&icd->dev, NULL);
+
+	icd->control = NULL;
 	v4l2_device_unregister_subdev(i2c_get_clientdata(client));
 	i2c_unregister_device(client);
 	i2c_put_adapter(adap);
@@ -1053,17 +1041,16 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd)
 static int soc_camera_video_start(struct soc_camera_device *icd);
 static int video_dev_create(struct soc_camera_device *icd);
 /* Called during host-driver probe */
-static int soc_camera_probe(struct device *dev)
+static int soc_camera_probe(struct soc_camera_device *icd)
 {
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(dev->parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct device *control = NULL;
 	struct v4l2_subdev *sd;
 	struct v4l2_mbus_framefmt mf;
 	int ret;
 
-	dev_info(dev, "Probing %s\n", dev_name(dev));
+	dev_info(icd->pdev, "Probing %s\n", dev_name(icd->pdev));
 
 	ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
 				 icl->regulators);
@@ -1099,7 +1086,7 @@ static int soc_camera_probe(struct device *dev)
 		if (icl->module_name)
 			ret = request_module(icl->module_name);
 
-		ret = icl->add_device(icl, &icd->dev);
+		ret = icl->add_device(icd);
 		if (ret < 0)
 			goto eadddev;
 
@@ -1110,7 +1097,7 @@ static int soc_camera_probe(struct device *dev)
 		control = to_soc_camera_control(icd);
 		if (!control || !control->driver || !dev_get_drvdata(control) ||
 		    !try_module_get(control->driver->owner)) {
-			icl->del_device(icl);
+			icl->del_device(icd);
 			goto enodrv;
 		}
 	}
@@ -1125,8 +1112,6 @@ static int soc_camera_probe(struct device *dev)
 
 	icd->field = V4L2_FIELD_ANY;
 
-	icd->vdev->lock = &icd->video_lock;
-
 	/*
 	 * ..._video_start() will create a device node, video_register_device()
 	 * itself is protected against concurrent open() calls, but we also have
@@ -1146,11 +1131,6 @@ static int soc_camera_probe(struct device *dev)
 		icd->field		= mf.field;
 	}
 
-	/* Do we have to sysfs_remove_link() before device_unregister()? */
-	if (sysfs_create_link(&icd->dev.kobj, &to_soc_camera_control(icd)->kobj,
-			      "control"))
-		dev_warn(&icd->dev, "Failed creating the control symlink\n");
-
 	ici->ops->remove(icd);
 
 	soc_camera_power_set(icd, icl, 0);
@@ -1166,7 +1146,7 @@ eiufmt:
 	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
 	} else {
-		icl->del_device(icl);
+		icl->del_device(icd);
 		module_put(control->driver->owner);
 	}
 enodrv:
@@ -1186,13 +1166,12 @@ ereg:
  * This is called on device_unregister, which only means we have to disconnect
  * from the host, but not remove ourselves from the device list
  */
-static int soc_camera_remove(struct device *dev)
+static int soc_camera_remove(struct soc_camera_device *icd)
 {
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
 	struct soc_camera_link *icl = to_soc_camera_link(icd);
 	struct video_device *vdev = icd->vdev;
 
-	BUG_ON(!dev->parent);
+	BUG_ON(!icd->parent);
 
 	if (vdev) {
 		video_unregister_device(vdev);
@@ -1202,10 +1181,9 @@ static int soc_camera_remove(struct device *dev)
 	if (icl->board_info) {
 		soc_camera_free_i2c(icd);
 	} else {
-		struct device_driver *drv = to_soc_camera_control(icd) ?
-			to_soc_camera_control(icd)->driver : NULL;
+		struct device_driver *drv = to_soc_camera_control(icd)->driver;
 		if (drv) {
-			icl->del_device(icl);
+			icl->del_device(icd);
 			module_put(drv->owner);
 		}
 	}
@@ -1216,49 +1194,6 @@ static int soc_camera_remove(struct device *dev)
 	return 0;
 }
 
-static int soc_camera_suspend(struct device *dev, pm_message_t state)
-{
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int ret = 0;
-
-	if (ici->ops->suspend)
-		ret = ici->ops->suspend(icd, state);
-
-	return ret;
-}
-
-static int soc_camera_resume(struct device *dev)
-{
-	struct soc_camera_device *icd = to_soc_camera_dev(dev);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	int ret = 0;
-
-	if (ici->ops->resume)
-		ret = ici->ops->resume(icd);
-
-	return ret;
-}
-
-struct bus_type soc_camera_bus_type = {
-	.name		= "soc-camera",
-	.probe		= soc_camera_probe,
-	.remove		= soc_camera_remove,
-	.suspend	= soc_camera_suspend,
-	.resume		= soc_camera_resume,
-};
-EXPORT_SYMBOL_GPL(soc_camera_bus_type);
-
-static struct device_driver ic_drv = {
-	.name	= "camera",
-	.bus	= &soc_camera_bus_type,
-	.owner	= THIS_MODULE,
-};
-
-static void dummy_release(struct device *dev)
-{
-}
-
 static int default_cropcap(struct soc_camera_device *icd,
 			   struct v4l2_cropcap *a)
 {
@@ -1317,13 +1252,6 @@ static int default_enum_fsizes(struct soc_camera_device *icd,
 	return 0;
 }
 
-static void soc_camera_device_init(struct device *dev, void *pdata)
-{
-	dev->platform_data	= pdata;
-	dev->bus		= &soc_camera_bus_type;
-	dev->release		= dummy_release;
-}
-
 int soc_camera_host_register(struct soc_camera_host *ici)
 {
 	struct soc_camera_host *ix;
@@ -1389,24 +1317,9 @@ void soc_camera_host_unregister(struct soc_camera_host *ici)
 	mutex_lock(&list_lock);
 
 	list_del(&ici->list);
-
-	list_for_each_entry(icd, &devices, list) {
-		if (icd->iface == ici->nr) {
-			void *pdata = icd->dev.platform_data;
-			/* The bus->remove will be called */
-			device_unregister(&icd->dev);
-			/*
-			 * Not before device_unregister(), .remove
-			 * needs parent to call ici->ops->remove().
-			 * If the host module is loaded again, device_register()
-			 * would complain "already initialised," since 2.6.32
-			 * this is also needed to prevent use-after-free of the
-			 * device private data.
-			 */
-			memset(&icd->dev, 0, sizeof(icd->dev));
-			soc_camera_device_init(&icd->dev, pdata);
-		}
-	}
+	list_for_each_entry(icd, &devices, list)
+		if (icd->iface == ici->nr && to_soc_camera_control(icd))
+			soc_camera_remove(icd);
 
 	mutex_unlock(&list_lock);
 
@@ -1448,11 +1361,6 @@ static int soc_camera_device_register(struct soc_camera_device *icd)
 	return 0;
 }
 
-static void soc_camera_device_unregister(struct soc_camera_device *icd)
-{
-	list_del(&icd->list);
-}
-
 static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 	.vidioc_querycap	 = soc_camera_querycap,
 	.vidioc_g_fmt_vid_cap    = soc_camera_g_fmt_vid_cap,
@@ -1487,7 +1395,7 @@ static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
 
 static int video_dev_create(struct soc_camera_device *icd)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
 	struct video_device *vdev = video_device_alloc();
 
 	if (!vdev)
@@ -1495,12 +1403,13 @@ static int video_dev_create(struct soc_camera_device *icd)
 
 	strlcpy(vdev->name, ici->drv_name, sizeof(vdev->name));
 
-	vdev->parent		= &icd->dev;
+	vdev->parent		= icd->pdev;
 	vdev->current_norm	= V4L2_STD_UNKNOWN;
 	vdev->fops		= &soc_camera_fops;
 	vdev->ioctl_ops		= &soc_camera_ioctl_ops;
 	vdev->release		= video_device_release;
 	vdev->tvnorms		= V4L2_STD_UNKNOWN;
+	vdev->lock		= &icd->video_lock;
 
 	icd->vdev = vdev;
 
@@ -1515,7 +1424,7 @@ static int soc_camera_video_start(struct soc_camera_device *icd)
 	const struct device_type *type = icd->vdev->dev.type;
 	int ret;
 
-	if (!icd->dev.parent)
+	if (!icd->parent)
 		return -ENODEV;
 
 	if (!icd->ops ||
@@ -1525,7 +1434,7 @@ static int soc_camera_video_start(struct soc_camera_device *icd)
 
 	ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret < 0) {
-		dev_err(&icd->dev, "video_register_device failed: %d\n", ret);
+		dev_err(icd->pdev, "video_register_device failed: %d\n", ret);
 		return ret;
 	}
 
@@ -1549,6 +1458,7 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	icd->iface = icl->bus_id;
+	icd->link = icl;
 	icd->pdev = &pdev->dev;
 	platform_set_drvdata(pdev, icd);
 
@@ -1556,8 +1466,6 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto escdevreg;
 
-	soc_camera_device_init(&icd->dev, icl);
-
 	icd->user_width		= DEFAULT_WIDTH;
 	icd->user_height	= DEFAULT_HEIGHT;
 
@@ -1581,7 +1489,7 @@ static int __devexit soc_camera_pdrv_remove(struct platform_device *pdev)
 	if (!icd)
 		return -EINVAL;
 
-	soc_camera_device_unregister(icd);
+	list_del(&icd->list);
 
 	kfree(icd);
 
@@ -1598,31 +1506,12 @@ static struct platform_driver __refdata soc_camera_pdrv = {
 
 static int __init soc_camera_init(void)
 {
-	int ret = bus_register(&soc_camera_bus_type);
-	if (ret)
-		return ret;
-	ret = driver_register(&ic_drv);
-	if (ret)
-		goto edrvr;
-
-	ret = platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe);
-	if (ret)
-		goto epdr;
-
-	return 0;
-
-epdr:
-	driver_unregister(&ic_drv);
-edrvr:
-	bus_unregister(&soc_camera_bus_type);
-	return ret;
+	return platform_driver_probe(&soc_camera_pdrv, soc_camera_pdrv_probe);
 }
 
 static void __exit soc_camera_exit(void)
 {
 	platform_driver_unregister(&soc_camera_pdrv);
-	driver_unregister(&ic_drv);
-	bus_unregister(&soc_camera_bus_type);
 }
 
 module_init(soc_camera_init);
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index bf406e89c99..8069cd6bc5e 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -146,7 +146,7 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	if (!p)
 		return -EINVAL;
 
-	if (!p->dev) {
+	if (!p->icd) {
 		dev_err(&pdev->dev,
 			"Platform has not set soc_camera_device pointer!\n");
 		return -EINVAL;
@@ -156,16 +156,16 @@ static int soc_camera_platform_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	icd = to_soc_camera_dev(p->dev);
+	icd = p->icd;
 
 	/* soc-camera convention: control's drvdata points to the subdev */
 	platform_set_drvdata(pdev, &priv->subdev);
 	/* Set the control device reference */
-	dev_set_drvdata(&icd->dev, &pdev->dev);
+	icd->control = &pdev->dev;
 
 	icd->ops = &soc_camera_platform_ops;
 
-	ici = to_soc_camera_host(icd->dev.parent);
+	ici = to_soc_camera_host(icd->parent);
 
 	v4l2_subdev_init(&priv->subdev, &platform_subdev_ops);
 	v4l2_set_subdevdata(&priv->subdev, p);
@@ -188,7 +188,7 @@ static int soc_camera_platform_remove(struct platform_device *pdev)
 {
 	struct soc_camera_platform_priv *priv = get_priv(pdev);
 	struct soc_camera_platform_info *p = pdev->dev.platform_data;
-	struct soc_camera_device *icd = to_soc_camera_dev(p->dev);
+	struct soc_camera_device *icd = p->icd;
 
 	v4l2_device_unregister_subdev(&priv->subdev);
 	icd->ops = NULL;
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
index c901721a1db..8afb0e8a2e0 100644
--- a/drivers/media/video/sr030pc30.c
+++ b/drivers/media/video/sr030pc30.c
@@ -726,8 +726,10 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	const struct sr030pc30_platform_data *pdata = info->pdata;
 	int ret;
 
-	if (WARN(pdata == NULL, "No platform data!\n"))
-		return -ENOMEM;
+	if (pdata == NULL) {
+		WARN(1, "No platform data!\n");
+		return -EINVAL;
+	}
 
 	/*
 	 * Put sensor into power sleep mode before switching off
@@ -746,6 +748,7 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	if (on) {
 		ret = sr030pc30_base_config(sd);
 	} else {
+		ret = 0;
 		info->curr_win = NULL;
 		info->curr_fmt = NULL;
 	}
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
index 3941f954daf..bd218545da9 100644
--- a/drivers/media/video/tda7432.c
+++ b/drivers/media/video/tda7432.c
@@ -49,10 +49,11 @@ static int maxvol;
 static int loudness; /* disable loudness by default */
 static int debug;	 /* insmod parameter */
 module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0).");
 module_param(loudness, int, S_IRUGO);
-MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)");
+MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0).");
 module_param(maxvol, int, S_IRUGO | S_IWUSR);
-
+MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0).");
 
 
 /* Structure of address and subaddresses for the tda7432 */
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
index fc611ebeb82..84cd1b65b76 100644
--- a/drivers/media/video/timblogiw.c
+++ b/drivers/media/video/timblogiw.c
@@ -20,7 +20,6 @@
  * Timberdale FPGA LogiWin Video In
  */
 
-#include <linux/version.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dmaengine.h>
diff --git a/drivers/media/video/tlg2300/pd-common.h b/drivers/media/video/tlg2300/pd-common.h
index 46066bdc73f..56564e6aaac 100644
--- a/drivers/media/video/tlg2300/pd-common.h
+++ b/drivers/media/video/tlg2300/pd-common.h
@@ -1,7 +1,6 @@
 #ifndef PD_COMMON_H
 #define PD_COMMON_H
 
-#include <linux/version.h>
 #include <linux/fs.h>
 #include <linux/wait.h>
 #include <linux/list.h>
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
index 99c81a9a4f4..129f135d5a5 100644
--- a/drivers/media/video/tlg2300/pd-main.c
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -531,3 +531,4 @@ module_exit(poseidon_exit);
 MODULE_AUTHOR("Telegent Systems");
 MODULE_DESCRIPTION("For tlg2300-based USB device ");
 MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.2");
diff --git a/drivers/media/video/tlg2300/pd-radio.c b/drivers/media/video/tlg2300/pd-radio.c
index fae84c2a0c3..4fad1dfb92c 100644
--- a/drivers/media/video/tlg2300/pd-radio.c
+++ b/drivers/media/video/tlg2300/pd-radio.c
@@ -6,7 +6,6 @@
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include <media/v4l2-dev.h>
-#include <linux/version.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
 #include <media/v4l2-ioctl.h>
@@ -149,7 +148,6 @@ static int vidioc_querycap(struct file *file, void *priv,
 	strlcpy(v->driver, "tele-radio", sizeof(v->driver));
 	strlcpy(v->card, "Telegent Poseidon", sizeof(v->card));
 	usb_make_path(p->udev, v->bus_info, sizeof(v->bus_info));
-	v->version = KERNEL_VERSION(0, 0, 1);
 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
 	return 0;
 }
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index a03945ab9f0..11cc980b0cd 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -39,6 +39,7 @@
 #include "tda9887.h"
 #include "xc5000.h"
 #include "tda18271.h"
+#include "xc4000.h"
 
 #define UNSET (-1U)
 
@@ -391,6 +392,23 @@ static void set_type(struct i2c_client *c, unsigned int type,
 		tune_now = 0;
 		break;
 	}
+	case TUNER_XC4000:
+	{
+		struct xc4000_config xc4000_cfg = {
+			.i2c_address	  = t->i2c->addr,
+			/* FIXME: the correct parameters will be set */
+			/* only when the digital dvb_attach() occurs */
+			.default_pm	  = 0,
+			.dvb_amplitude	  = 0,
+			.set_smoothedcvbs = 0,
+			.if_khz		  = 0
+		};
+		if (!dvb_attach(xc4000_attach,
+				&t->fe, t->i2c->adapter, &xc4000_cfg))
+			goto attach_failed;
+		tune_now = 0;
+		break;
+	}
 	default:
 		if (!dvb_attach(simple_tuner_attach, &t->fe,
 				t->i2c->adapter, t->i2c->addr, t->type))
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 0347bbe3645..742482e3001 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -552,16 +552,6 @@ static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
 	return ret;
 }
 
-static int tw9910_enum_input(struct soc_camera_device *icd,
-			     struct v4l2_input *inp)
-{
-	inp->type = V4L2_INPUT_TYPE_TUNER;
-	inp->std  = V4L2_STD_UNKNOWN;
-	strcpy(inp->name, "Video");
-
-	return 0;
-}
-
 static int tw9910_g_chip_ident(struct v4l2_subdev *sd,
 			       struct v4l2_dbg_chip_ident *id)
 {
@@ -846,13 +836,9 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 	struct tw9910_priv *priv = to_tw9910(client);
 	s32 id;
 
-	/*
-	 * We must have a parent by now. And it cannot be a wrong one.
-	 * So this entire test is completely redundant.
-	 */
-	if (!icd->dev.parent ||
-	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
-		return -ENODEV;
+	/* We must have a parent by now. And it cannot be a wrong one. */
+	BUG_ON(!icd->parent ||
+	       to_soc_camera_host(icd->parent)->nr != icd->iface);
 
 	/*
 	 * tw9910 only use 8 or 16 bit bus width
@@ -891,7 +877,6 @@ static int tw9910_video_probe(struct soc_camera_device *icd,
 static struct soc_camera_ops tw9910_ops = {
 	.set_bus_param		= tw9910_set_bus_param,
 	.query_bus_param	= tw9910_query_bus_param,
-	.enum_input		= tw9910_enum_input,
 };
 
 static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index ea8ea8a48df..5a74f5e07d7 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -45,7 +45,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/timer.h>
@@ -77,15 +76,7 @@
 #define DRIVER_ALIAS "USBVision"
 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
 #define DRIVER_LICENSE "GPL"
-#define USBVISION_DRIVER_VERSION_MAJOR 0
-#define USBVISION_DRIVER_VERSION_MINOR 9
-#define USBVISION_DRIVER_VERSION_PATCHLEVEL 10
-#define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,\
-USBVISION_DRIVER_VERSION_MINOR,\
-USBVISION_DRIVER_VERSION_PATCHLEVEL)
-#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) \
-"." __stringify(USBVISION_DRIVER_VERSION_MINOR) \
-"." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
+#define USBVISION_VERSION_STRING "0.9.11"
 
 #define	ENABLE_HEXDUMP	0	/* Enable if you need it */
 
@@ -516,7 +507,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 		usbvision_device_data[usbvision->dev_model].model_string,
 		sizeof(vc->card));
 	usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info));
-	vc->version = USBVISION_DRIVER_VERSION;
 	vc->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_AUDIO |
 		V4L2_CAP_READWRITE |
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 2c8954ec685..10c2364f3e8 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -1664,8 +1664,8 @@ int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
 		return -EINVAL;
 	}
 
-	/* Search for the matching (GUID/CS) control in the given device */
-	list_for_each_entry(entity, &dev->entities, list) {
+	/* Search for the matching (GUID/CS) control on the current chain */
+	list_for_each_entry(entity, &chain->entities, chain) {
 		unsigned int i;
 
 		if (UVC_ENTITY_TYPE(entity) != UVC_VC_EXTENSION_UNIT ||
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index b6eae48d7fb..d29f9c2d085 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -31,6 +31,7 @@
 #include <linux/videodev2.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
+#include <linux/version.h>
 #include <asm/atomic.h>
 #include <asm/unaligned.h>
 
@@ -1857,7 +1858,7 @@ static int uvc_probe(struct usb_interface *intf,
 			sizeof(dev->mdev.serial));
 	strcpy(dev->mdev.bus_info, udev->devpath);
 	dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
-	dev->mdev.driver_version = DRIVER_VERSION_NUMBER;
+	dev->mdev.driver_version = LINUX_VERSION_CODE;
 	if (media_device_register(&dev->mdev) < 0)
 		goto error;
 
@@ -2130,6 +2131,15 @@ static struct usb_device_id uvc_ids[] = {
 	  .bInterfaceProtocol	= 0,
 	  .driver_info 		= UVC_QUIRK_PROBE_MINMAX
 				| UVC_QUIRK_BUILTIN_ISIGHT },
+	/* Foxlink ("HP Webcam" on HP Mini 5103) */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x05c8,
+	  .idProduct		= 0x0403,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_QUIRK_FIX_BANDWIDTH },
 	/* Genesys Logic USB 2.0 PC Camera */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index dde6533e8e6..ea71d5f1f6d 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -83,7 +83,7 @@ static int uvc_ioctl_ctrl_map(struct uvc_video_chain *chain,
 	default:
 		uvc_trace(UVC_TRACE_CONTROL, "Unsupported V4L2 control type "
 			  "%u.\n", xmap->v4l2_type);
-		ret = -EINVAL;
+		ret = -ENOTTY;
 		goto done;
 	}
 
@@ -571,7 +571,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		strlcpy(cap->card, vdev->name, sizeof cap->card);
 		usb_make_path(stream->dev->udev,
 			      cap->bus_info, sizeof(cap->bus_info));
-		cap->version = DRIVER_VERSION_NUMBER;
+		cap->version = LINUX_VERSION_CODE;
 		if (stream->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 			cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 					  | V4L2_CAP_STREAMING;
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index 20107fd3574..df32a43ca86 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -183,8 +183,7 @@ struct uvc_xu_control {
  * Driver specific constants.
  */
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(1, 1, 0)
-#define DRIVER_VERSION		"v1.1.0"
+#define DRIVER_VERSION		"1.1.1"
 
 /* Number of isochronous URBs. */
 #define UVC_URBS		5
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 06b9f9f8201..5c6100fb407 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -105,6 +105,9 @@ int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
 		    menu_items[ctrl->value][0] == '\0')
 			return -EINVAL;
 	}
+	if (qctrl->type == V4L2_CTRL_TYPE_BITMASK &&
+			(ctrl->value & ~qctrl->maximum))
+		return -ERANGE;
 	return 0;
 }
 EXPORT_SYMBOL(v4l2_ctrl_check);
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 7c2694738b3..61979b70f38 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -662,6 +662,32 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext
 	return 0;
 }
 
+struct v4l2_event32 {
+	__u32				type;
+	union {
+		__u8			data[64];
+	} u;
+	__u32				pending;
+	__u32				sequence;
+	struct compat_timespec		timestamp;
+	__u32				id;
+	__u32				reserved[8];
+};
+
+static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up)
+{
+	if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) ||
+		put_user(kp->type, &up->type) ||
+		copy_to_user(&up->u, &kp->u, sizeof(kp->u)) ||
+		put_user(kp->pending, &up->pending) ||
+		put_user(kp->sequence, &up->sequence) ||
+		put_compat_timespec(&kp->timestamp, &up->timestamp) ||
+		put_user(kp->id, &up->id) ||
+		copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32)))
+			return -EFAULT;
+	return 0;
+}
+
 #define VIDIOC_G_FMT32		_IOWR('V',  4, struct v4l2_format32)
 #define VIDIOC_S_FMT32		_IOWR('V',  5, struct v4l2_format32)
 #define VIDIOC_QUERYBUF32	_IOWR('V',  9, struct v4l2_buffer32)
@@ -675,6 +701,7 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext
 #define VIDIOC_G_EXT_CTRLS32    _IOWR('V', 71, struct v4l2_ext_controls32)
 #define VIDIOC_S_EXT_CTRLS32    _IOWR('V', 72, struct v4l2_ext_controls32)
 #define VIDIOC_TRY_EXT_CTRLS32  _IOWR('V', 73, struct v4l2_ext_controls32)
+#define	VIDIOC_DQEVENT32	_IOR ('V', 89, struct v4l2_event32)
 
 #define VIDIOC_OVERLAY32	_IOW ('V', 14, s32)
 #define VIDIOC_STREAMON32	_IOW ('V', 18, s32)
@@ -693,6 +720,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		struct v4l2_input v2i;
 		struct v4l2_standard v2s;
 		struct v4l2_ext_controls v2ecs;
+		struct v4l2_event v2ev;
 		unsigned long vx;
 		int vi;
 	} karg;
@@ -715,6 +743,7 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 	case VIDIOC_G_EXT_CTRLS32: cmd = VIDIOC_G_EXT_CTRLS; break;
 	case VIDIOC_S_EXT_CTRLS32: cmd = VIDIOC_S_EXT_CTRLS; break;
 	case VIDIOC_TRY_EXT_CTRLS32: cmd = VIDIOC_TRY_EXT_CTRLS; break;
+	case VIDIOC_DQEVENT32: cmd = VIDIOC_DQEVENT; break;
 	case VIDIOC_OVERLAY32: cmd = VIDIOC_OVERLAY; break;
 	case VIDIOC_STREAMON32: cmd = VIDIOC_STREAMON; break;
 	case VIDIOC_STREAMOFF32: cmd = VIDIOC_STREAMOFF; break;
@@ -778,6 +807,9 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		err = get_v4l2_ext_controls32(&karg.v2ecs, up);
 		compatible_arg = 0;
 		break;
+	case VIDIOC_DQEVENT:
+		compatible_arg = 0;
+		break;
 	}
 	if (err)
 		return err;
@@ -818,6 +850,10 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		err = put_v4l2_framebuffer32(&karg.v2fb, up);
 		break;
 
+	case VIDIOC_DQEVENT:
+		err = put_v4l2_event32(&karg.v2ev, up);
+		break;
+
 	case VIDIOC_G_FMT:
 	case VIDIOC_S_FMT:
 	case VIDIOC_TRY_FMT:
@@ -920,6 +956,7 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 	case VIDIOC_S_DV_TIMINGS:
 	case VIDIOC_G_DV_TIMINGS:
 	case VIDIOC_DQEVENT:
+	case VIDIOC_DQEVENT32:
 	case VIDIOC_SUBSCRIBE_EVENT:
 	case VIDIOC_UNSUBSCRIBE_EVENT:
 		ret = do_video_ioctl(file, cmd, arg);
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 2412f08527a..06b6014d4fb 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -23,17 +23,39 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-dev.h>
 
+#define has_op(master, op) \
+	(master->ops && master->ops->op)
+#define call_op(master, op) \
+	(has_op(master, op) ? master->ops->op(master) : 0)
+
 /* Internal temporary helper struct, one for each v4l2_ext_control */
-struct ctrl_helper {
+struct v4l2_ctrl_helper {
+	/* Pointer to the control reference of the master control */
+	struct v4l2_ctrl_ref *mref;
 	/* The control corresponding to the v4l2_ext_control ID field. */
 	struct v4l2_ctrl *ctrl;
-	/* Used internally to mark whether this control was already
-	   processed. */
-	bool handled;
+	/* v4l2_ext_control index of the next control belonging to the
+	   same cluster, or 0 if there isn't any. */
+	u32 next;
 };
 
+/* Small helper function to determine if the autocluster is set to manual
+   mode. In that case the is_volatile flag should be ignored. */
+static bool is_cur_manual(const struct v4l2_ctrl *master)
+{
+	return master->is_auto && master->cur.val == master->manual_mode_value;
+}
+
+/* Same as above, but this checks the against the new value instead of the
+   current value. */
+static bool is_new_manual(const struct v4l2_ctrl *master)
+{
+	return master->is_auto && master->val == master->manual_mode_value;
+}
+
 /* Returns NULL or a character pointer array containing the menu for
    the given control ID. The pointer array ends with a NULL pointer.
    An empty string signifies a menu entry that is invalid. This allows
@@ -181,7 +203,7 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 	};
 	static const char * const mpeg_stream_vbi_fmt[] = {
 		"No VBI",
-		"Private packet, IVTV format",
+		"Private Packet, IVTV Format",
 		NULL
 	};
 	static const char * const camera_power_line_frequency[] = {
@@ -204,18 +226,130 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 		"Negative",
 		"Emboss",
 		"Sketch",
-		"Sky blue",
-		"Grass green",
-		"Skin whiten",
+		"Sky Blue",
+		"Grass Green",
+		"Skin Whiten",
 		"Vivid",
 		NULL
 	};
 	static const char * const tune_preemphasis[] = {
-		"No preemphasis",
+		"No Preemphasis",
 		"50 useconds",
 		"75 useconds",
 		NULL,
 	};
+	static const char * const header_mode[] = {
+		"Separate Buffer",
+		"Joined With 1st Frame",
+		NULL,
+	};
+	static const char * const multi_slice[] = {
+		"Single",
+		"Max Macroblocks",
+		"Max Bytes",
+		NULL,
+	};
+	static const char * const entropy_mode[] = {
+		"CAVLC",
+		"CABAC",
+		NULL,
+	};
+	static const char * const mpeg_h264_level[] = {
+		"1",
+		"1b",
+		"1.1",
+		"1.2",
+		"1.3",
+		"2",
+		"2.1",
+		"2.2",
+		"3",
+		"3.1",
+		"3.2",
+		"4",
+		"4.1",
+		"4.2",
+		"5",
+		"5.1",
+		NULL,
+	};
+	static const char * const h264_loop_filter[] = {
+		"Enabled",
+		"Disabled",
+		"Disabled at Slice Boundary",
+		NULL,
+	};
+	static const char * const h264_profile[] = {
+		"Baseline",
+		"Constrained Baseline",
+		"Main",
+		"Extended",
+		"High",
+		"High 10",
+		"High 422",
+		"High 444 Predictive",
+		"High 10 Intra",
+		"High 422 Intra",
+		"High 444 Intra",
+		"CAVLC 444 Intra",
+		"Scalable Baseline",
+		"Scalable High",
+		"Scalable High Intra",
+		"Multiview High",
+		NULL,
+	};
+	static const char * const vui_sar_idc[] = {
+		"Unspecified",
+		"1:1",
+		"12:11",
+		"10:11",
+		"16:11",
+		"40:33",
+		"24:11",
+		"20:11",
+		"32:11",
+		"80:33",
+		"18:11",
+		"15:11",
+		"64:33",
+		"160:99",
+		"4:3",
+		"3:2",
+		"2:1",
+		"Extended SAR",
+		NULL,
+	};
+	static const char * const mpeg_mpeg4_level[] = {
+		"0",
+		"0b",
+		"1",
+		"2",
+		"3",
+		"3b",
+		"4",
+		"5",
+		NULL,
+	};
+	static const char * const mpeg4_profile[] = {
+		"Simple",
+		"Adcanved Simple",
+		"Core",
+		"Simple Scalable",
+		"Advanced Coding Efficency",
+		NULL,
+	};
+
+	static const char * const flash_led_mode[] = {
+		"Off",
+		"Flash",
+		"Torch",
+		NULL,
+	};
+	static const char * const flash_strobe_source[] = {
+		"Software",
+		"External",
+		NULL,
+	};
 
 	switch (id) {
 	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
@@ -256,6 +390,28 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
 		return colorfx;
 	case V4L2_CID_TUNE_PREEMPHASIS:
 		return tune_preemphasis;
+	case V4L2_CID_FLASH_LED_MODE:
+		return flash_led_mode;
+	case V4L2_CID_FLASH_STROBE_SOURCE:
+		return flash_strobe_source;
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
+		return header_mode;
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:
+		return multi_slice;
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:
+		return entropy_mode;
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+		return mpeg_h264_level;
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+		return h264_loop_filter;
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+		return h264_profile;
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
+		return vui_sar_idc;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
+		return mpeg_mpeg4_level;
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
+		return mpeg4_profile;
 	default:
 		return NULL;
 	}
@@ -307,6 +463,8 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_CHROMA_GAIN:		return "Chroma Gain";
 	case V4L2_CID_ILLUMINATORS_1:		return "Illuminator 1";
 	case V4L2_CID_ILLUMINATORS_2:		return "Illuminator 2";
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:	return "Minimum Number of Capture Buffers";
+	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:	return "Minimum Number of Output Buffers";
 
 	/* MPEG controls */
 	/* Keep the order of the 'case's the same as in videodev2.h! */
@@ -343,6 +501,48 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
 	case V4L2_CID_MPEG_VIDEO_MUTE:		return "Video Mute";
 	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:	return "Video Mute YUV";
+	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:	return "Decoder Slice Interface";
+	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:	return "MPEG4 Loop Filter Enable";
+	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:	return "The Number of Intra Refresh MBs";
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:		return "Frame Level Rate Control Enable";
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:			return "H264 MB Level Rate Control";
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:			return "Sequence Header Mode";
+	case V4L2_CID_MPEG_VIDEO_MAX_REF_PIC:			return "The Max Number of Reference Picture";
+	case V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP:		return "H263 I-Frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP:		return "H263 P frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP:		return "H263 B frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_MIN_QP:			return "H263 Minimum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H263_MAX_QP:			return "H263 Maximum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP:		return "H264 I-Frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP:		return "H264 P frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP:		return "H264 B frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_MAX_QP:			return "H264 Maximum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_MIN_QP:			return "H264 Minimum QP Value";
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:		return "H264 8x8 Transform Enable";
+	case V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE:			return "H264 CPB Buffer Size";
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:		return "H264 Entorpy Mode";
+	case V4L2_CID_MPEG_VIDEO_H264_I_PERIOD:			return "H264 I Period";
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:			return "H264 Level";
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA:	return "H264 Loop Filter Alpha Offset";
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA:		return "H264 Loop Filter Beta Offset";
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:		return "H264 Loop Filter Mode";
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:			return "H264 Profile";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT:	return "Vertical Size of SAR";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH:	return "Horizontal Size of SAR";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:		return "Aspect Ratio VUI Enable";
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:		return "VUI Aspect Ratio IDC";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP:		return "MPEG4 I-Frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP:		return "MPEG4 P frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP:		return "MPEG4 B frame QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP:			return "MPEG4 Minimum QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP:			return "MPEG4 Maximum QP Value";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:			return "MPEG4 Level";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:			return "MPEG4 Profile";
+	case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:			return "Quarter Pixel Search Enable";
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES:		return "The Maximum Bytes Per Slice";
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB:		return "The Number of MB in a Slice";
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:		return "The Slice Partitioning Method";
+	case V4L2_CID_MPEG_VIDEO_VBV_SIZE:			return "VBV Buffer Size";
 
 	/* CAMERA controls */
 	/* Keep the order of the 'case's the same as in videodev2.h! */
@@ -389,6 +589,21 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_TUNE_POWER_LEVEL:		return "Tune Power Level";
 	case V4L2_CID_TUNE_ANTENNA_CAPACITOR:	return "Tune Antenna Capacitor";
 
+	/* Flash controls */
+	case V4L2_CID_FLASH_CLASS:		return "Flash controls";
+	case V4L2_CID_FLASH_LED_MODE:		return "LED mode";
+	case V4L2_CID_FLASH_STROBE_SOURCE:	return "Strobe source";
+	case V4L2_CID_FLASH_STROBE:		return "Strobe";
+	case V4L2_CID_FLASH_STROBE_STOP:	return "Stop strobe";
+	case V4L2_CID_FLASH_STROBE_STATUS:	return "Strobe status";
+	case V4L2_CID_FLASH_TIMEOUT:		return "Strobe timeout";
+	case V4L2_CID_FLASH_INTENSITY:		return "Intensity, flash mode";
+	case V4L2_CID_FLASH_TORCH_INTENSITY:	return "Intensity, torch mode";
+	case V4L2_CID_FLASH_INDICATOR_INTENSITY: return "Intensity, indicator";
+	case V4L2_CID_FLASH_FAULT:		return "Faults";
+	case V4L2_CID_FLASH_CHARGE:		return "Charge";
+	case V4L2_CID_FLASH_READY:		return "Ready to strobe";
+
 	default:
 		return NULL;
 	}
@@ -423,12 +638,24 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_PILOT_TONE_ENABLED:
 	case V4L2_CID_ILLUMINATORS_1:
 	case V4L2_CID_ILLUMINATORS_2:
+	case V4L2_CID_FLASH_STROBE_STATUS:
+	case V4L2_CID_FLASH_CHARGE:
+	case V4L2_CID_FLASH_READY:
+	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
+	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
+	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:
+	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE:
+	case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:
 		*type = V4L2_CTRL_TYPE_BOOLEAN;
 		*min = 0;
 		*max = *step = 1;
 		break;
 	case V4L2_CID_PAN_RESET:
 	case V4L2_CID_TILT_RESET:
+	case V4L2_CID_FLASH_STROBE:
+	case V4L2_CID_FLASH_STROBE_STOP:
 		*type = V4L2_CTRL_TYPE_BUTTON;
 		*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
 		*min = *max = *step = *def = 0;
@@ -452,6 +679,17 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_EXPOSURE_AUTO:
 	case V4L2_CID_COLORFX:
 	case V4L2_CID_TUNE_PREEMPHASIS:
+	case V4L2_CID_FLASH_LED_MODE:
+	case V4L2_CID_FLASH_STROBE_SOURCE:
+	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:
+	case V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE:
+	case V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE:
+	case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+	case V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE:
+	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
+	case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
+	case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
+	case V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE:
 		*type = V4L2_CTRL_TYPE_MENU;
 		break;
 	case V4L2_CID_RDS_TX_PS_NAME:
@@ -462,6 +700,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_CAMERA_CLASS:
 	case V4L2_CID_MPEG_CLASS:
 	case V4L2_CID_FM_TX_CLASS:
+	case V4L2_CID_FLASH_CLASS:
 		*type = V4L2_CTRL_TYPE_CTRL_CLASS;
 		/* You can neither read not write these */
 		*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
@@ -474,6 +713,14 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 		/* Max is calculated as RGB888 that is 2^24 */
 		*max = 0xFFFFFF;
 		break;
+	case V4L2_CID_FLASH_FAULT:
+		*type = V4L2_CTRL_TYPE_BITMASK;
+		break;
+	case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE:
+	case V4L2_CID_MIN_BUFFERS_FOR_OUTPUT:
+		*type = V4L2_CTRL_TYPE_INTEGER;
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		break;
 	default:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
@@ -519,6 +766,10 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_ZOOM_RELATIVE:
 		*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
 		break;
+	case V4L2_CID_FLASH_STROBE_STATUS:
+	case V4L2_CID_FLASH_READY:
+		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
+		break;
 	}
 }
 EXPORT_SYMBOL(v4l2_ctrl_fill);
@@ -537,6 +788,42 @@ static bool type_is_int(const struct v4l2_ctrl *ctrl)
 	}
 }
 
+static void fill_event(struct v4l2_event *ev, struct v4l2_ctrl *ctrl, u32 changes)
+{
+	memset(ev->reserved, 0, sizeof(ev->reserved));
+	ev->type = V4L2_EVENT_CTRL;
+	ev->id = ctrl->id;
+	ev->u.ctrl.changes = changes;
+	ev->u.ctrl.type = ctrl->type;
+	ev->u.ctrl.flags = ctrl->flags;
+	if (ctrl->type == V4L2_CTRL_TYPE_STRING)
+		ev->u.ctrl.value64 = 0;
+	else
+		ev->u.ctrl.value64 = ctrl->cur.val64;
+	ev->u.ctrl.minimum = ctrl->minimum;
+	ev->u.ctrl.maximum = ctrl->maximum;
+	if (ctrl->type == V4L2_CTRL_TYPE_MENU)
+		ev->u.ctrl.step = 1;
+	else
+		ev->u.ctrl.step = ctrl->step;
+	ev->u.ctrl.default_value = ctrl->default_value;
+}
+
+static void send_event(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 changes)
+{
+	struct v4l2_event ev;
+	struct v4l2_subscribed_event *sev;
+
+	if (list_empty(&ctrl->ev_subs))
+		return;
+	fill_event(&ev, ctrl, changes);
+
+	list_for_each_entry(sev, &ctrl->ev_subs, node)
+		if (sev->fh && (sev->fh != fh ||
+				(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
+			v4l2_event_queue_fh(sev->fh, &ev);
+}
+
 /* Helper function: copy the current control value back to the caller */
 static int cur_to_user(struct v4l2_ext_control *c,
 		       struct v4l2_ctrl *ctrl)
@@ -624,22 +911,45 @@ static int new_to_user(struct v4l2_ext_control *c,
 }
 
 /* Copy the new value to the current value. */
-static void new_to_cur(struct v4l2_ctrl *ctrl)
+static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl,
+						bool update_inactive)
 {
+	bool changed = false;
+
 	if (ctrl == NULL)
 		return;
 	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_BUTTON:
+		changed = true;
+		break;
 	case V4L2_CTRL_TYPE_STRING:
 		/* strings are always 0-terminated */
+		changed = strcmp(ctrl->string, ctrl->cur.string);
 		strcpy(ctrl->cur.string, ctrl->string);
 		break;
 	case V4L2_CTRL_TYPE_INTEGER64:
+		changed = ctrl->val64 != ctrl->cur.val64;
 		ctrl->cur.val64 = ctrl->val64;
 		break;
 	default:
+		changed = ctrl->val != ctrl->cur.val;
 		ctrl->cur.val = ctrl->val;
 		break;
 	}
+	if (update_inactive) {
+		ctrl->flags &= ~V4L2_CTRL_FLAG_INACTIVE;
+		if (!is_cur_manual(ctrl->cluster[0]))
+			ctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
+	}
+	if (changed || update_inactive) {
+		/* If a control was changed that was not one of the controls
+		   modified by the application, then send the event to all. */
+		if (!ctrl->is_new)
+			fh = NULL;
+		send_event(fh, ctrl,
+			(changed ? V4L2_EVENT_CTRL_CH_VALUE : 0) |
+			(update_inactive ? V4L2_EVENT_CTRL_CH_FLAGS : 0));
+	}
 }
 
 /* Copy the current value to the new value */
@@ -692,13 +1002,11 @@ static int cluster_changed(struct v4l2_ctrl *master)
 	return diff;
 }
 
-/* Validate a new control */
-static int validate_new(struct v4l2_ctrl *ctrl)
+/* Validate integer-type control */
+static int validate_new_int(const struct v4l2_ctrl *ctrl, s32 *pval)
 {
-	s32 val = ctrl->val;
-	char *s = ctrl->string;
+	s32 val = *pval;
 	u32 offset;
-	size_t len;
 
 	switch (ctrl->type) {
 	case V4L2_CTRL_TYPE_INTEGER:
@@ -711,11 +1019,11 @@ static int validate_new(struct v4l2_ctrl *ctrl)
 		offset = val - ctrl->minimum;
 		offset = ctrl->step * (offset / ctrl->step);
 		val = ctrl->minimum + offset;
-		ctrl->val = val;
+		*pval = val;
 		return 0;
 
 	case V4L2_CTRL_TYPE_BOOLEAN:
-		ctrl->val = !!ctrl->val;
+		*pval = !!val;
 		return 0;
 
 	case V4L2_CTRL_TYPE_MENU:
@@ -726,11 +1034,35 @@ static int validate_new(struct v4l2_ctrl *ctrl)
 			return -EINVAL;
 		return 0;
 
+	case V4L2_CTRL_TYPE_BITMASK:
+		*pval &= ctrl->maximum;
+		return 0;
+
 	case V4L2_CTRL_TYPE_BUTTON:
 	case V4L2_CTRL_TYPE_CTRL_CLASS:
-		ctrl->val64 = 0;
+		*pval = 0;
 		return 0;
 
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Validate a new control */
+static int validate_new(const struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c)
+{
+	char *s = c->string;
+	size_t len;
+
+	switch (ctrl->type) {
+	case V4L2_CTRL_TYPE_INTEGER:
+	case V4L2_CTRL_TYPE_BOOLEAN:
+	case V4L2_CTRL_TYPE_MENU:
+	case V4L2_CTRL_TYPE_BITMASK:
+	case V4L2_CTRL_TYPE_BUTTON:
+	case V4L2_CTRL_TYPE_CTRL_CLASS:
+		return validate_new_int(ctrl, &c->value);
+
 	case V4L2_CTRL_TYPE_INTEGER64:
 		return 0;
 
@@ -780,6 +1112,7 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
 {
 	struct v4l2_ctrl_ref *ref, *next_ref;
 	struct v4l2_ctrl *ctrl, *next_ctrl;
+	struct v4l2_subscribed_event *sev, *next_sev;
 
 	if (hdl == NULL || hdl->buckets == NULL)
 		return;
@@ -793,6 +1126,8 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
 	/* Free all controls owned by the handler */
 	list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) {
 		list_del(&ctrl->node);
+		list_for_each_entry_safe(sev, next_sev, &ctrl->ev_subs, node)
+			list_del(&sev->node);
 		kfree(ctrl);
 	}
 	kfree(hdl->buckets);
@@ -962,13 +1297,17 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 
 	/* Sanity checks */
 	if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
-	    max < min ||
 	    (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
+	    (type == V4L2_CTRL_TYPE_BITMASK && max == 0) ||
 	    (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
 	    (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
 	}
+	if (type != V4L2_CTRL_TYPE_BITMASK && max < min) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
 	if ((type == V4L2_CTRL_TYPE_INTEGER ||
 	     type == V4L2_CTRL_TYPE_MENU ||
 	     type == V4L2_CTRL_TYPE_BOOLEAN) &&
@@ -976,6 +1315,10 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
 	}
+	if (type == V4L2_CTRL_TYPE_BITMASK && ((def & ~max) || min || step)) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
 
 	if (type == V4L2_CTRL_TYPE_BUTTON)
 		flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
@@ -991,6 +1334,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	}
 
 	INIT_LIST_HEAD(&ctrl->node);
+	INIT_LIST_HEAD(&ctrl->ev_subs);
 	ctrl->handler = hdl;
 	ctrl->ops = ops;
 	ctrl->id = id;
@@ -1132,6 +1476,9 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
 		/* Skip handler-private controls. */
 		if (ctrl->is_private)
 			continue;
+		/* And control classes */
+		if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
+			continue;
 		ret = handler_new_ref(hdl, ctrl);
 		if (ret)
 			break;
@@ -1147,7 +1494,7 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
 	int i;
 
 	/* The first control is the master control and it must not be NULL */
-	BUG_ON(controls[0] == NULL);
+	BUG_ON(ncontrols == 0 || controls[0] == NULL);
 
 	for (i = 0; i < ncontrols; i++) {
 		if (controls[i]) {
@@ -1158,18 +1505,47 @@ void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
 }
 EXPORT_SYMBOL(v4l2_ctrl_cluster);
 
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			    u8 manual_val, bool set_volatile)
+{
+	struct v4l2_ctrl *master = controls[0];
+	u32 flag;
+	int i;
+
+	v4l2_ctrl_cluster(ncontrols, controls);
+	WARN_ON(ncontrols <= 1);
+	WARN_ON(manual_val < master->minimum || manual_val > master->maximum);
+	master->is_auto = true;
+	master->manual_mode_value = manual_val;
+	master->flags |= V4L2_CTRL_FLAG_UPDATE;
+	flag = is_cur_manual(master) ? 0 : V4L2_CTRL_FLAG_INACTIVE;
+
+	for (i = 1; i < ncontrols; i++)
+		if (controls[i]) {
+			controls[i]->is_volatile = set_volatile;
+			controls[i]->flags |= flag;
+		}
+}
+EXPORT_SYMBOL(v4l2_ctrl_auto_cluster);
+
 /* Activate/deactivate a control. */
 void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active)
 {
+	/* invert since the actual flag is called 'inactive' */
+	bool inactive = !active;
+	bool old;
+
 	if (ctrl == NULL)
 		return;
 
-	if (!active)
+	if (inactive)
 		/* set V4L2_CTRL_FLAG_INACTIVE */
-		set_bit(4, &ctrl->flags);
+		old = test_and_set_bit(4, &ctrl->flags);
 	else
 		/* clear V4L2_CTRL_FLAG_INACTIVE */
-		clear_bit(4, &ctrl->flags);
+		old = test_and_clear_bit(4, &ctrl->flags);
+	if (old != inactive)
+		send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_FLAGS);
 }
 EXPORT_SYMBOL(v4l2_ctrl_activate);
 
@@ -1181,15 +1557,21 @@ EXPORT_SYMBOL(v4l2_ctrl_activate);
    these controls. */
 void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
 {
+	bool old;
+
 	if (ctrl == NULL)
 		return;
 
+	v4l2_ctrl_lock(ctrl);
 	if (grabbed)
 		/* set V4L2_CTRL_FLAG_GRABBED */
-		set_bit(1, &ctrl->flags);
+		old = test_and_set_bit(1, &ctrl->flags);
 	else
 		/* clear V4L2_CTRL_FLAG_GRABBED */
-		clear_bit(1, &ctrl->flags);
+		old = test_and_clear_bit(1, &ctrl->flags);
+	if (old != grabbed)
+		send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_FLAGS);
+	v4l2_ctrl_unlock(ctrl);
 }
 EXPORT_SYMBOL(v4l2_ctrl_grab);
 
@@ -1217,6 +1599,9 @@ static void log_ctrl(const struct v4l2_ctrl *ctrl,
 	case V4L2_CTRL_TYPE_MENU:
 		printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
 		break;
+	case V4L2_CTRL_TYPE_BITMASK:
+		printk(KERN_CONT "0x%08x", ctrl->cur.val);
+		break;
 	case V4L2_CTRL_TYPE_INTEGER64:
 		printk(KERN_CONT "%lld", ctrl->cur.val64);
 		break;
@@ -1277,26 +1662,21 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
 		int i;
 
 		/* Skip if this control was already handled by a cluster. */
-		if (ctrl->done)
+		/* Skip button controls and read-only controls. */
+		if (ctrl->done || ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
+		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
 			continue;
 
 		for (i = 0; i < master->ncontrols; i++) {
 			if (master->cluster[i]) {
 				cur_to_new(master->cluster[i]);
 				master->cluster[i]->is_new = 1;
+				master->cluster[i]->done = true;
 			}
 		}
-
-		/* Skip button controls and read-only controls. */
-		if (ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
-		    (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
-			continue;
-		ret = master->ops->s_ctrl(master);
+		ret = call_op(master, s_ctrl);
 		if (ret)
 			break;
-		for (i = 0; i < master->ncontrols; i++)
-			if (master->cluster[i])
-				master->cluster[i]->done = true;
 	}
 	mutex_unlock(&hdl->lock);
 	return ret;
@@ -1447,18 +1827,19 @@ EXPORT_SYMBOL(v4l2_subdev_querymenu);
    Find the controls in the control array and do some basic checks. */
 static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 			     struct v4l2_ext_controls *cs,
-			     struct ctrl_helper *helpers,
-			     bool try)
+			     struct v4l2_ctrl_helper *helpers)
 {
+	struct v4l2_ctrl_helper *h;
+	bool have_clusters = false;
 	u32 i;
 
-	for (i = 0; i < cs->count; i++) {
+	for (i = 0, h = helpers; i < cs->count; i++, h++) {
 		struct v4l2_ext_control *c = &cs->controls[i];
+		struct v4l2_ctrl_ref *ref;
 		struct v4l2_ctrl *ctrl;
 		u32 id = c->id & V4L2_CTRL_ID_MASK;
 
-		if (try)
-			cs->error_idx = i;
+		cs->error_idx = i;
 
 		if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class)
 			return -EINVAL;
@@ -1467,53 +1848,59 @@ static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		   extended controls */
 		if (id >= V4L2_CID_PRIVATE_BASE)
 			return -EINVAL;
-		ctrl = v4l2_ctrl_find(hdl, id);
-		if (ctrl == NULL)
+		ref = find_ref_lock(hdl, id);
+		if (ref == NULL)
 			return -EINVAL;
+		ctrl = ref->ctrl;
 		if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED)
 			return -EINVAL;
 
-		helpers[i].ctrl = ctrl;
-		helpers[i].handled = false;
+		if (ctrl->cluster[0]->ncontrols > 1)
+			have_clusters = true;
+		if (ctrl->cluster[0] != ctrl)
+			ref = find_ref_lock(hdl, ctrl->cluster[0]->id);
+		/* Store the ref to the master control of the cluster */
+		h->mref = ref;
+		h->ctrl = ctrl;
+		/* Initially set next to 0, meaning that there is no other
+		   control in this helper array belonging to the same
+		   cluster */
+		h->next = 0;
 	}
-	return 0;
-}
 
-typedef int (*cluster_func)(struct v4l2_ext_control *c,
-			    struct v4l2_ctrl *ctrl);
+	/* We are done if there were no controls that belong to a multi-
+	   control cluster. */
+	if (!have_clusters)
+		return 0;
 
-/* Walk over all controls in v4l2_ext_controls belonging to the same cluster
-   and call the provided function. */
-static int cluster_walk(unsigned from,
-			struct v4l2_ext_controls *cs,
-			struct ctrl_helper *helpers,
-			cluster_func f)
-{
-	struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
-	int ret = 0;
-	int i;
+	/* The code below figures out in O(n) time which controls in the list
+	   belong to the same cluster. */
 
-	/* Find any controls from the same cluster and call the function */
-	for (i = from; !ret && i < cs->count; i++) {
-		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
+	/* This has to be done with the handler lock taken. */
+	mutex_lock(&hdl->lock);
 
-		if (!helpers[i].handled && ctrl->cluster == cluster)
-			ret = f(&cs->controls[i], ctrl);
+	/* First zero the helper field in the master control references */
+	for (i = 0; i < cs->count; i++)
+		helpers[i].mref->helper = 0;
+	for (i = 0, h = helpers; i < cs->count; i++, h++) {
+		struct v4l2_ctrl_ref *mref = h->mref;
+
+		/* If the mref->helper is set, then it points to an earlier
+		   helper that belongs to the same cluster. */
+		if (mref->helper) {
+			/* Set the next field of mref->helper to the current
+			   index: this means that that earlier helper now
+			   points to the next helper in the same cluster. */
+			mref->helper->next = i;
+			/* mref should be set only for the first helper in the
+			   cluster, clear the others. */
+			h->mref = NULL;
+		}
+		/* Point the mref helper to the current helper struct. */
+		mref->helper = h;
 	}
-	return ret;
-}
-
-static void cluster_done(unsigned from,
-			 struct v4l2_ext_controls *cs,
-			 struct ctrl_helper *helpers)
-{
-	struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
-	int i;
-
-	/* Find any controls from the same cluster and mark them as handled */
-	for (i = from; i < cs->count; i++)
-		if (helpers[i].ctrl->cluster == cluster)
-			helpers[i].handled = true;
+	mutex_unlock(&hdl->lock);
+	return 0;
 }
 
 /* Handles the corner case where cs->count == 0. It checks whether the
@@ -1531,10 +1918,10 @@ static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class)
 /* Get extended controls. Allocates the helpers array if needed. */
 int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
 {
-	struct ctrl_helper helper[4];
-	struct ctrl_helper *helpers = helper;
+	struct v4l2_ctrl_helper helper[4];
+	struct v4l2_ctrl_helper *helpers = helper;
 	int ret;
-	int i;
+	int i, j;
 
 	cs->error_idx = cs->count;
 	cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
@@ -1551,30 +1938,46 @@ int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs
 			return -ENOMEM;
 	}
 
-	ret = prepare_ext_ctrls(hdl, cs, helpers, false);
+	ret = prepare_ext_ctrls(hdl, cs, helpers);
+	cs->error_idx = cs->count;
 
 	for (i = 0; !ret && i < cs->count; i++)
 		if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
 			ret = -EACCES;
 
 	for (i = 0; !ret && i < cs->count; i++) {
-		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
-		struct v4l2_ctrl *master = ctrl->cluster[0];
+		int (*ctrl_to_user)(struct v4l2_ext_control *c,
+				    struct v4l2_ctrl *ctrl) = cur_to_user;
+		struct v4l2_ctrl *master;
 
-		if (helpers[i].handled)
+		if (helpers[i].mref == NULL)
 			continue;
 
+		master = helpers[i].mref->ctrl;
 		cs->error_idx = i;
 
 		v4l2_ctrl_lock(master);
-		/* g_volatile_ctrl will update the current control values */
-		if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
-			ret = master->ops->g_volatile_ctrl(master);
-		/* If OK, then copy the current control values to the caller */
-		if (!ret)
-			ret = cluster_walk(i, cs, helpers, cur_to_user);
+
+		/* g_volatile_ctrl will update the new control values */
+		if (has_op(master, g_volatile_ctrl) && !is_cur_manual(master)) {
+			for (j = 0; j < master->ncontrols; j++)
+				cur_to_new(master->cluster[j]);
+			ret = call_op(master, g_volatile_ctrl);
+			ctrl_to_user = new_to_user;
+		}
+		/* If OK, then copy the current (for non-volatile controls)
+		   or the new (for volatile controls) control values to the
+		   caller */
+		if (!ret) {
+			u32 idx = i;
+
+			do {
+				ret = ctrl_to_user(cs->controls + idx,
+						   helpers[idx].ctrl);
+				idx = helpers[idx].next;
+			} while (!ret && idx);
+		}
 		v4l2_ctrl_unlock(master);
-		cluster_done(i, cs, helpers);
 	}
 
 	if (cs->count > ARRAY_SIZE(helper))
@@ -1594,15 +1997,21 @@ static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
 {
 	struct v4l2_ctrl *master = ctrl->cluster[0];
 	int ret = 0;
+	int i;
 
 	if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
 		return -EACCES;
 
 	v4l2_ctrl_lock(master);
 	/* g_volatile_ctrl will update the current control values */
-	if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
-		ret = master->ops->g_volatile_ctrl(master);
-	*val = ctrl->cur.val;
+	if (ctrl->is_volatile && !is_cur_manual(master)) {
+		for (i = 0; i < master->ncontrols; i++)
+			cur_to_new(master->cluster[i]);
+		ret = call_op(master, g_volatile_ctrl);
+		*val = ctrl->val;
+	} else {
+		*val = ctrl->cur.val;
+	}
 	v4l2_ctrl_unlock(master);
 	return ret;
 }
@@ -1638,72 +2047,61 @@ EXPORT_SYMBOL(v4l2_ctrl_g_ctrl);
 /* Core function that calls try/s_ctrl and ensures that the new value is
    copied to the current value on a set.
    Must be called with ctrl->handler->lock held. */
-static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set)
+static int try_or_set_cluster(struct v4l2_fh *fh,
+			      struct v4l2_ctrl *master, bool set)
 {
-	bool try = !set;
-	int ret = 0;
+	bool update_flag;
+	int ret;
 	int i;
 
 	/* Go through the cluster and either validate the new value or
 	   (if no new value was set), copy the current value to the new
 	   value, ensuring a consistent view for the control ops when
 	   called. */
-	for (i = 0; !ret && i < master->ncontrols; i++) {
+	for (i = 0; i < master->ncontrols; i++) {
 		struct v4l2_ctrl *ctrl = master->cluster[i];
 
 		if (ctrl == NULL)
 			continue;
 
-		if (ctrl->is_new) {
-			/* Double check this: it may have changed since the
-			   last check in try_or_set_ext_ctrls(). */
-			if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
-				return -EBUSY;
-
-			/* Validate if required */
-			if (!set)
-				ret = validate_new(ctrl);
+		if (!ctrl->is_new) {
+			cur_to_new(ctrl);
 			continue;
 		}
-		/* No new value was set, so copy the current and force
-		   a call to try_ctrl later, since the values for the cluster
-		   may now have changed and the end result might be invalid. */
-		try = true;
-		cur_to_new(ctrl);
+		/* Check again: it may have changed since the
+		   previous check in try_or_set_ext_ctrls(). */
+		if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
+			return -EBUSY;
 	}
 
-	/* For larger clusters you have to call try_ctrl again to
-	   verify that the controls are still valid after the
-	   'cur_to_new' above. */
-	if (!ret && master->ops->try_ctrl && try)
-		ret = master->ops->try_ctrl(master);
+	ret = call_op(master, try_ctrl);
 
 	/* Don't set if there is no change */
-	if (!ret && set && cluster_changed(master)) {
-		ret = master->ops->s_ctrl(master);
-		/* If OK, then make the new values permanent. */
-		if (!ret)
-			for (i = 0; i < master->ncontrols; i++)
-				new_to_cur(master->cluster[i]);
-	}
-	return ret;
+	if (ret || !set || !cluster_changed(master))
+		return ret;
+	ret = call_op(master, s_ctrl);
+	if (ret)
+		return ret;
+
+	/* If OK, then make the new values permanent. */
+	update_flag = is_cur_manual(master) != is_new_manual(master);
+	for (i = 0; i < master->ncontrols; i++)
+		new_to_cur(fh, master->cluster[i], update_flag && i > 0);
+	return 0;
 }
 
-/* Try or set controls. */
-static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
-				struct v4l2_ext_controls *cs,
-				struct ctrl_helper *helpers,
-				bool set)
+/* Validate controls. */
+static int validate_ctrls(struct v4l2_ext_controls *cs,
+			  struct v4l2_ctrl_helper *helpers, bool set)
 {
-	unsigned i, j;
+	unsigned i;
 	int ret = 0;
 
 	cs->error_idx = cs->count;
 	for (i = 0; i < cs->count; i++) {
 		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
 
-		if (!set)
-			cs->error_idx = i;
+		cs->error_idx = i;
 
 		if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
 			return -EACCES;
@@ -1715,50 +2113,22 @@ static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		   best-effort to avoid that. */
 		if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
 			return -EBUSY;
+		ret = validate_new(ctrl, &cs->controls[i]);
+		if (ret)
+			return ret;
 	}
-
-	for (i = 0; !ret && i < cs->count; i++) {
-		struct v4l2_ctrl *ctrl = helpers[i].ctrl;
-		struct v4l2_ctrl *master = ctrl->cluster[0];
-
-		cs->error_idx = i;
-
-		if (helpers[i].handled)
-			continue;
-
-		v4l2_ctrl_lock(ctrl);
-
-		/* Reset the 'is_new' flags of the cluster */
-		for (j = 0; j < master->ncontrols; j++)
-			if (master->cluster[j])
-				master->cluster[j]->is_new = 0;
-
-		/* Copy the new caller-supplied control values.
-		   user_to_new() sets 'is_new' to 1. */
-		ret = cluster_walk(i, cs, helpers, user_to_new);
-
-		if (!ret)
-			ret = try_or_set_control_cluster(master, set);
-
-		/* Copy the new values back to userspace. */
-		if (!ret)
-			ret = cluster_walk(i, cs, helpers, new_to_user);
-
-		v4l2_ctrl_unlock(ctrl);
-		cluster_done(i, cs, helpers);
-	}
-	return ret;
+	return 0;
 }
 
 /* Try or try-and-set controls */
-static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
+static int try_set_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
 			     struct v4l2_ext_controls *cs,
 			     bool set)
 {
-	struct ctrl_helper helper[4];
-	struct ctrl_helper *helpers = helper;
+	struct v4l2_ctrl_helper helper[4];
+	struct v4l2_ctrl_helper *helpers = helper;
+	unsigned i, j;
 	int ret;
-	int i;
 
 	cs->error_idx = cs->count;
 	cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
@@ -1774,25 +2144,49 @@ static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
 		if (!helpers)
 			return -ENOMEM;
 	}
-	ret = prepare_ext_ctrls(hdl, cs, helpers, !set);
-	if (ret)
-		goto free;
-
-	/* First 'try' all controls and abort on error */
-	ret = try_or_set_ext_ctrls(hdl, cs, helpers, false);
-	/* If this is a 'set' operation and the initial 'try' failed,
-	   then set error_idx to count to tell the application that no
-	   controls changed value yet. */
-	if (set)
+	ret = prepare_ext_ctrls(hdl, cs, helpers);
+	if (!ret)
+		ret = validate_ctrls(cs, helpers, set);
+	if (ret && set)
 		cs->error_idx = cs->count;
-	if (!ret && set) {
-		/* Reset 'handled' state */
-		for (i = 0; i < cs->count; i++)
-			helpers[i].handled = false;
-		ret = try_or_set_ext_ctrls(hdl, cs, helpers, true);
+	for (i = 0; !ret && i < cs->count; i++) {
+		struct v4l2_ctrl *master;
+		u32 idx = i;
+
+		if (helpers[i].mref == NULL)
+			continue;
+
+		cs->error_idx = i;
+		master = helpers[i].mref->ctrl;
+		v4l2_ctrl_lock(master);
+
+		/* Reset the 'is_new' flags of the cluster */
+		for (j = 0; j < master->ncontrols; j++)
+			if (master->cluster[j])
+				master->cluster[j]->is_new = 0;
+
+		/* Copy the new caller-supplied control values.
+		   user_to_new() sets 'is_new' to 1. */
+		do {
+			ret = user_to_new(cs->controls + idx, helpers[idx].ctrl);
+			idx = helpers[idx].next;
+		} while (!ret && idx);
+
+		if (!ret)
+			ret = try_or_set_cluster(fh, master, set);
+
+		/* Copy the new values back to userspace. */
+		if (!ret) {
+			idx = i;
+			do {
+				ret = new_to_user(cs->controls + idx,
+						helpers[idx].ctrl);
+				idx = helpers[idx].next;
+			} while (!ret && idx);
+		}
+		v4l2_ctrl_unlock(master);
 	}
 
-free:
 	if (cs->count > ARRAY_SIZE(helper))
 		kfree(helpers);
 	return ret;
@@ -1800,37 +2194,39 @@ free:
 
 int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(hdl, cs, false);
+	return try_set_ext_ctrls(NULL, hdl, cs, false);
 }
 EXPORT_SYMBOL(v4l2_try_ext_ctrls);
 
-int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
+int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+					struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(hdl, cs, true);
+	return try_set_ext_ctrls(fh, hdl, cs, true);
 }
 EXPORT_SYMBOL(v4l2_s_ext_ctrls);
 
 int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(sd->ctrl_handler, cs, false);
+	return try_set_ext_ctrls(NULL, sd->ctrl_handler, cs, false);
 }
 EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls);
 
 int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
 {
-	return try_set_ext_ctrls(sd->ctrl_handler, cs, true);
+	return try_set_ext_ctrls(NULL, sd->ctrl_handler, cs, true);
 }
 EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
 
 /* Helper function for VIDIOC_S_CTRL compatibility */
-static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
+static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, s32 *val)
 {
 	struct v4l2_ctrl *master = ctrl->cluster[0];
 	int ret;
 	int i;
 
-	if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
-		return -EACCES;
+	ret = validate_new_int(ctrl, val);
+	if (ret)
+		return ret;
 
 	v4l2_ctrl_lock(ctrl);
 
@@ -1841,28 +2237,30 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
 
 	ctrl->val = *val;
 	ctrl->is_new = 1;
-	ret = try_or_set_control_cluster(master, false);
-	if (!ret)
-		ret = try_or_set_control_cluster(master, true);
+	ret = try_or_set_cluster(fh, master, true);
 	*val = ctrl->cur.val;
 	v4l2_ctrl_unlock(ctrl);
 	return ret;
 }
 
-int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
+int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+					struct v4l2_control *control)
 {
 	struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
 
 	if (ctrl == NULL || !type_is_int(ctrl))
 		return -EINVAL;
 
-	return set_ctrl(ctrl, &control->value);
+	if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
+		return -EACCES;
+
+	return set_ctrl(fh, ctrl, &control->value);
 }
 EXPORT_SYMBOL(v4l2_s_ctrl);
 
 int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
 {
-	return v4l2_s_ctrl(sd->ctrl_handler, control);
+	return v4l2_s_ctrl(NULL, sd->ctrl_handler, control);
 }
 EXPORT_SYMBOL(v4l2_subdev_s_ctrl);
 
@@ -1870,6 +2268,34 @@ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
 {
 	/* It's a driver bug if this happens. */
 	WARN_ON(!type_is_int(ctrl));
-	return set_ctrl(ctrl, &val);
+	return set_ctrl(NULL, ctrl, &val);
 }
 EXPORT_SYMBOL(v4l2_ctrl_s_ctrl);
+
+void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl,
+				struct v4l2_subscribed_event *sev)
+{
+	v4l2_ctrl_lock(ctrl);
+	list_add_tail(&sev->node, &ctrl->ev_subs);
+	if (ctrl->type != V4L2_CTRL_TYPE_CTRL_CLASS &&
+	    (sev->flags & V4L2_EVENT_SUB_FL_SEND_INITIAL)) {
+		struct v4l2_event ev;
+		u32 changes = V4L2_EVENT_CTRL_CH_FLAGS;
+
+		if (!(ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY))
+			changes |= V4L2_EVENT_CTRL_CH_VALUE;
+		fill_event(&ev, ctrl, changes);
+		v4l2_event_queue_fh(sev->fh, &ev);
+	}
+	v4l2_ctrl_unlock(ctrl);
+}
+EXPORT_SYMBOL(v4l2_ctrl_add_event);
+
+void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl,
+				struct v4l2_subscribed_event *sev)
+{
+	v4l2_ctrl_lock(ctrl);
+	list_del(&sev->node);
+	v4l2_ctrl_unlock(ctrl);
+}
+EXPORT_SYMBOL(v4l2_ctrl_del_event);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 4aae501f02d..c72856c4143 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -209,6 +209,7 @@ int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev)
 		vdev->v4l2_dev = v4l2_dev;
 		vdev->fops = &v4l2_subdev_fops;
 		vdev->release = video_device_release_empty;
+		vdev->ctrl_handler = sd->ctrl_handler;
 		err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1,
 					      sd->owner);
 		if (err < 0)
diff --git a/drivers/media/video/v4l2-event.c b/drivers/media/video/v4l2-event.c
index 69fd343d477..53b190cf225 100644
--- a/drivers/media/video/v4l2-event.c
+++ b/drivers/media/video/v4l2-event.c
@@ -25,100 +25,39 @@
 #include <media/v4l2-dev.h>
 #include <media/v4l2-fh.h>
 #include <media/v4l2-event.h>
+#include <media/v4l2-ctrls.h>
 
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-int v4l2_event_init(struct v4l2_fh *fh)
+static unsigned sev_pos(const struct v4l2_subscribed_event *sev, unsigned idx)
 {
-	fh->events = kzalloc(sizeof(*fh->events), GFP_KERNEL);
-	if (fh->events == NULL)
-		return -ENOMEM;
-
-	init_waitqueue_head(&fh->events->wait);
-
-	INIT_LIST_HEAD(&fh->events->free);
-	INIT_LIST_HEAD(&fh->events->available);
-	INIT_LIST_HEAD(&fh->events->subscribed);
-
-	fh->events->sequence = -1;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(v4l2_event_init);
-
-int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n)
-{
-	struct v4l2_events *events = fh->events;
-	unsigned long flags;
-
-	if (!events) {
-		WARN_ON(1);
-		return -ENOMEM;
-	}
-
-	while (events->nallocated < n) {
-		struct v4l2_kevent *kev;
-
-		kev = kzalloc(sizeof(*kev), GFP_KERNEL);
-		if (kev == NULL)
-			return -ENOMEM;
-
-		spin_lock_irqsave(&fh->vdev->fh_lock, flags);
-		list_add_tail(&kev->list, &events->free);
-		events->nallocated++;
-		spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(v4l2_event_alloc);
-
-#define list_kfree(list, type, member)				\
-	while (!list_empty(list)) {				\
-		type *hi;					\
-		hi = list_first_entry(list, type, member);	\
-		list_del(&hi->member);				\
-		kfree(hi);					\
-	}
-
-void v4l2_event_free(struct v4l2_fh *fh)
-{
-	struct v4l2_events *events = fh->events;
-
-	if (!events)
-		return;
-
-	list_kfree(&events->free, struct v4l2_kevent, list);
-	list_kfree(&events->available, struct v4l2_kevent, list);
-	list_kfree(&events->subscribed, struct v4l2_subscribed_event, list);
-
-	kfree(events);
-	fh->events = NULL;
+	idx += sev->first;
+	return idx >= sev->elems ? idx - sev->elems : idx;
 }
-EXPORT_SYMBOL_GPL(v4l2_event_free);
 
 static int __v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event)
 {
-	struct v4l2_events *events = fh->events;
 	struct v4l2_kevent *kev;
 	unsigned long flags;
 
 	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
 
-	if (list_empty(&events->available)) {
+	if (list_empty(&fh->available)) {
 		spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
 		return -ENOENT;
 	}
 
-	WARN_ON(events->navailable == 0);
+	WARN_ON(fh->navailable == 0);
 
-	kev = list_first_entry(&events->available, struct v4l2_kevent, list);
-	list_move(&kev->list, &events->free);
-	events->navailable--;
+	kev = list_first_entry(&fh->available, struct v4l2_kevent, list);
+	list_del(&kev->list);
+	fh->navailable--;
 
-	kev->event.pending = events->navailable;
+	kev->event.pending = fh->navailable;
 	*event = kev->event;
+	kev->sev->first = sev_pos(kev->sev, 1);
+	kev->sev->in_use--;
 
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
 
@@ -128,7 +67,6 @@ static int __v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event)
 int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 		       int nonblocking)
 {
-	struct v4l2_events *events = fh->events;
 	int ret;
 
 	if (nonblocking)
@@ -139,8 +77,8 @@ int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 		mutex_unlock(fh->vdev->lock);
 
 	do {
-		ret = wait_event_interruptible(events->wait,
-					       events->navailable != 0);
+		ret = wait_event_interruptible(fh->wait,
+					       fh->navailable != 0);
 		if (ret < 0)
 			break;
 
@@ -154,23 +92,72 @@ int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 }
 EXPORT_SYMBOL_GPL(v4l2_event_dequeue);
 
-/* Caller must hold fh->event->lock! */
+/* Caller must hold fh->vdev->fh_lock! */
 static struct v4l2_subscribed_event *v4l2_event_subscribed(
-	struct v4l2_fh *fh, u32 type)
+		struct v4l2_fh *fh, u32 type, u32 id)
 {
-	struct v4l2_events *events = fh->events;
 	struct v4l2_subscribed_event *sev;
 
 	assert_spin_locked(&fh->vdev->fh_lock);
 
-	list_for_each_entry(sev, &events->subscribed, list) {
-		if (sev->type == type)
+	list_for_each_entry(sev, &fh->subscribed, list)
+		if (sev->type == type && sev->id == id)
 			return sev;
-	}
 
 	return NULL;
 }
 
+static void __v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev,
+		const struct timespec *ts)
+{
+	struct v4l2_subscribed_event *sev;
+	struct v4l2_kevent *kev;
+	bool copy_payload = true;
+
+	/* Are we subscribed? */
+	sev = v4l2_event_subscribed(fh, ev->type, ev->id);
+	if (sev == NULL)
+		return;
+
+	/* Increase event sequence number on fh. */
+	fh->sequence++;
+
+	/* Do we have any free events? */
+	if (sev->in_use == sev->elems) {
+		/* no, remove the oldest one */
+		kev = sev->events + sev_pos(sev, 0);
+		list_del(&kev->list);
+		sev->in_use--;
+		sev->first = sev_pos(sev, 1);
+		fh->navailable--;
+		if (sev->elems == 1) {
+			if (sev->replace) {
+				sev->replace(&kev->event, ev);
+				copy_payload = false;
+			}
+		} else if (sev->merge) {
+			struct v4l2_kevent *second_oldest =
+				sev->events + sev_pos(sev, 0);
+			sev->merge(&kev->event, &second_oldest->event);
+		}
+	}
+
+	/* Take one and fill it. */
+	kev = sev->events + sev_pos(sev, sev->in_use);
+	kev->event.type = ev->type;
+	if (copy_payload)
+		kev->event.u = ev->u;
+	kev->event.id = ev->id;
+	kev->event.timestamp = *ts;
+	kev->event.sequence = fh->sequence;
+	sev->in_use++;
+	list_add_tail(&kev->list, &fh->available);
+
+	fh->navailable++;
+
+	wake_up_all(&fh->wait);
+}
+
 void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev)
 {
 	struct v4l2_fh *fh;
@@ -181,81 +168,95 @@ void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev)
 
 	spin_lock_irqsave(&vdev->fh_lock, flags);
 
-	list_for_each_entry(fh, &vdev->fh_list, list) {
-		struct v4l2_events *events = fh->events;
-		struct v4l2_kevent *kev;
+	list_for_each_entry(fh, &vdev->fh_list, list)
+		__v4l2_event_queue_fh(fh, ev, &timestamp);
 
-		/* Are we subscribed? */
-		if (!v4l2_event_subscribed(fh, ev->type))
-			continue;
+	spin_unlock_irqrestore(&vdev->fh_lock, flags);
+}
+EXPORT_SYMBOL_GPL(v4l2_event_queue);
 
-		/* Increase event sequence number on fh. */
-		events->sequence++;
+void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev)
+{
+	unsigned long flags;
+	struct timespec timestamp;
 
-		/* Do we have any free events? */
-		if (list_empty(&events->free))
-			continue;
+	ktime_get_ts(&timestamp);
 
-		/* Take one and fill it. */
-		kev = list_first_entry(&events->free, struct v4l2_kevent, list);
-		kev->event.type = ev->type;
-		kev->event.u = ev->u;
-		kev->event.timestamp = timestamp;
-		kev->event.sequence = events->sequence;
-		list_move_tail(&kev->list, &events->available);
+	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
+	__v4l2_event_queue_fh(fh, ev, &timestamp);
+	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
+}
+EXPORT_SYMBOL_GPL(v4l2_event_queue_fh);
 
-		events->navailable++;
+int v4l2_event_pending(struct v4l2_fh *fh)
+{
+	return fh->navailable;
+}
+EXPORT_SYMBOL_GPL(v4l2_event_pending);
 
-		wake_up_all(&events->wait);
-	}
+static void ctrls_replace(struct v4l2_event *old, const struct v4l2_event *new)
+{
+	u32 old_changes = old->u.ctrl.changes;
 
-	spin_unlock_irqrestore(&vdev->fh_lock, flags);
+	old->u.ctrl = new->u.ctrl;
+	old->u.ctrl.changes |= old_changes;
 }
-EXPORT_SYMBOL_GPL(v4l2_event_queue);
 
-int v4l2_event_pending(struct v4l2_fh *fh)
+static void ctrls_merge(const struct v4l2_event *old, struct v4l2_event *new)
 {
-	return fh->events->navailable;
+	new->u.ctrl.changes |= old->u.ctrl.changes;
 }
-EXPORT_SYMBOL_GPL(v4l2_event_pending);
 
 int v4l2_event_subscribe(struct v4l2_fh *fh,
-			 struct v4l2_event_subscription *sub)
+			 struct v4l2_event_subscription *sub, unsigned elems)
 {
-	struct v4l2_events *events = fh->events;
-	struct v4l2_subscribed_event *sev;
+	struct v4l2_subscribed_event *sev, *found_ev;
+	struct v4l2_ctrl *ctrl = NULL;
 	unsigned long flags;
-
-	if (fh->events == NULL) {
-		WARN_ON(1);
-		return -ENOMEM;
+	unsigned i;
+
+	if (elems < 1)
+		elems = 1;
+	if (sub->type == V4L2_EVENT_CTRL) {
+		ctrl = v4l2_ctrl_find(fh->ctrl_handler, sub->id);
+		if (ctrl == NULL)
+			return -EINVAL;
 	}
 
-	sev = kmalloc(sizeof(*sev), GFP_KERNEL);
+	sev = kzalloc(sizeof(*sev) + sizeof(struct v4l2_kevent) * elems, GFP_KERNEL);
 	if (!sev)
 		return -ENOMEM;
-
-	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
-
-	if (v4l2_event_subscribed(fh, sub->type) == NULL) {
-		INIT_LIST_HEAD(&sev->list);
-		sev->type = sub->type;
-
-		list_add(&sev->list, &events->subscribed);
-		sev = NULL;
+	for (i = 0; i < elems; i++)
+		sev->events[i].sev = sev;
+	sev->type = sub->type;
+	sev->id = sub->id;
+	sev->flags = sub->flags;
+	sev->fh = fh;
+	sev->elems = elems;
+	if (ctrl) {
+		sev->replace = ctrls_replace;
+		sev->merge = ctrls_merge;
 	}
 
+	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
+	found_ev = v4l2_event_subscribed(fh, sub->type, sub->id);
+	if (!found_ev)
+		list_add(&sev->list, &fh->subscribed);
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
 
-	kfree(sev);
+	/* v4l2_ctrl_add_event uses a mutex, so do this outside the spin lock */
+	if (found_ev)
+		kfree(sev);
+	else if (ctrl)
+		v4l2_ctrl_add_event(ctrl, sev);
 
 	return 0;
 }
 EXPORT_SYMBOL_GPL(v4l2_event_subscribe);
 
-static void v4l2_event_unsubscribe_all(struct v4l2_fh *fh)
+void v4l2_event_unsubscribe_all(struct v4l2_fh *fh)
 {
-	struct v4l2_events *events = fh->events;
+	struct v4l2_event_subscription sub;
 	struct v4l2_subscribed_event *sev;
 	unsigned long flags;
 
@@ -263,15 +264,18 @@ static void v4l2_event_unsubscribe_all(struct v4l2_fh *fh)
 		sev = NULL;
 
 		spin_lock_irqsave(&fh->vdev->fh_lock, flags);
-		if (!list_empty(&events->subscribed)) {
-			sev = list_first_entry(&events->subscribed,
-				       struct v4l2_subscribed_event, list);
-			list_del(&sev->list);
+		if (!list_empty(&fh->subscribed)) {
+			sev = list_first_entry(&fh->subscribed,
+					struct v4l2_subscribed_event, list);
+			sub.type = sev->type;
+			sub.id = sev->id;
 		}
 		spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
-		kfree(sev);
+		if (sev)
+			v4l2_event_unsubscribe(fh, &sub);
 	} while (sev);
 }
+EXPORT_SYMBOL_GPL(v4l2_event_unsubscribe_all);
 
 int v4l2_event_unsubscribe(struct v4l2_fh *fh,
 			   struct v4l2_event_subscription *sub)
@@ -286,11 +290,19 @@ int v4l2_event_unsubscribe(struct v4l2_fh *fh,
 
 	spin_lock_irqsave(&fh->vdev->fh_lock, flags);
 
-	sev = v4l2_event_subscribed(fh, sub->type);
-	if (sev != NULL)
+	sev = v4l2_event_subscribed(fh, sub->type, sub->id);
+	if (sev != NULL) {
 		list_del(&sev->list);
+		sev->fh = NULL;
+	}
 
 	spin_unlock_irqrestore(&fh->vdev->fh_lock, flags);
+	if (sev && sev->type == V4L2_EVENT_CTRL) {
+		struct v4l2_ctrl *ctrl = v4l2_ctrl_find(fh->ctrl_handler, sev->id);
+
+		if (ctrl)
+			v4l2_ctrl_del_event(ctrl, sev);
+	}
 
 	kfree(sev);
 
diff --git a/drivers/media/video/v4l2-fh.c b/drivers/media/video/v4l2-fh.c
index 717f71e6370..122822d2b8b 100644
--- a/drivers/media/video/v4l2-fh.c
+++ b/drivers/media/video/v4l2-fh.c
@@ -29,23 +29,18 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
 
-int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev)
 {
 	fh->vdev = vdev;
+	/* Inherit from video_device. May be overridden by the driver. */
+	fh->ctrl_handler = vdev->ctrl_handler;
 	INIT_LIST_HEAD(&fh->list);
 	set_bit(V4L2_FL_USES_V4L2_FH, &fh->vdev->flags);
 	fh->prio = V4L2_PRIORITY_UNSET;
-
-	/*
-	 * fh->events only needs to be initialized if the driver
-	 * supports the VIDIOC_SUBSCRIBE_EVENT ioctl.
-	 */
-	if (vdev->ioctl_ops && vdev->ioctl_ops->vidioc_subscribe_event)
-		return v4l2_event_init(fh);
-
-	fh->events = NULL;
-
-	return 0;
+	init_waitqueue_head(&fh->wait);
+	INIT_LIST_HEAD(&fh->available);
+	INIT_LIST_HEAD(&fh->subscribed);
+	fh->sequence = -1;
 }
 EXPORT_SYMBOL_GPL(v4l2_fh_init);
 
@@ -91,10 +86,8 @@ void v4l2_fh_exit(struct v4l2_fh *fh)
 {
 	if (fh->vdev == NULL)
 		return;
-
+	v4l2_event_unsubscribe_all(fh);
 	fh->vdev = NULL;
-
-	v4l2_event_free(fh);
 }
 EXPORT_SYMBOL_GPL(v4l2_fh_exit);
 
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 69e8c6ffcc4..002ce136344 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/version.h>
 
 #include <linux/videodev2.h>
 
@@ -542,12 +543,12 @@ static long __video_do_ioctl(struct file *file,
 	struct v4l2_fh *vfh = NULL;
 	struct v4l2_format f_copy;
 	int use_fh_prio = 0;
-	long ret = -EINVAL;
+	long ret = -ENOTTY;
 
 	if (ops == NULL) {
 		printk(KERN_WARNING "videodev: \"%s\" has no ioctl_ops.\n",
 				vfd->name);
-		return -EINVAL;
+		return ret;
 	}
 
 	if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
@@ -605,6 +606,7 @@ static long __video_do_ioctl(struct file *file,
 		if (!ops->vidioc_querycap)
 			break;
 
+		cap->version = LINUX_VERSION_CODE;
 		ret = ops->vidioc_querycap(file, fh, cap);
 		if (!ret)
 			dbgarg(cmd, "driver=%s, card=%s, bus=%s, "
@@ -1418,7 +1420,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_queryctrl *p = arg;
 
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_queryctrl(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_queryctrl(vfd->ctrl_handler, p);
 		else if (ops->vidioc_queryctrl)
 			ret = ops->vidioc_queryctrl(file, fh, p);
@@ -1438,7 +1442,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_control *p = arg;
 
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_g_ctrl(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_g_ctrl(vfd->ctrl_handler, p);
 		else if (ops->vidioc_g_ctrl)
 			ret = ops->vidioc_g_ctrl(file, fh, p);
@@ -1470,14 +1476,18 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls ctrls;
 		struct v4l2_ext_control ctrl;
 
-		if (!vfd->ctrl_handler &&
+		if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
 			!ops->vidioc_s_ctrl && !ops->vidioc_s_ext_ctrls)
 			break;
 
 		dbgarg(cmd, "id=0x%x, value=%d\n", p->id, p->value);
 
+		if (vfh && vfh->ctrl_handler) {
+			ret = v4l2_s_ctrl(vfh, vfh->ctrl_handler, p);
+			break;
+		}
 		if (vfd->ctrl_handler) {
-			ret = v4l2_s_ctrl(vfd->ctrl_handler, p);
+			ret = v4l2_s_ctrl(NULL, vfd->ctrl_handler, p);
 			break;
 		}
 		if (ops->vidioc_s_ctrl) {
@@ -1501,7 +1511,9 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_g_ext_ctrls(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_g_ext_ctrls(vfd->ctrl_handler, p);
 		else if (ops->vidioc_g_ext_ctrls && check_ext_ctrls(p, 0))
 			ret = ops->vidioc_g_ext_ctrls(file, fh, p);
@@ -1515,11 +1527,14 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!vfd->ctrl_handler && !ops->vidioc_s_ext_ctrls)
+		if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
+				!ops->vidioc_s_ext_ctrls)
 			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (vfd->ctrl_handler)
-			ret = v4l2_s_ext_ctrls(vfd->ctrl_handler, p);
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
+			ret = v4l2_s_ext_ctrls(NULL, vfd->ctrl_handler, p);
 		else if (check_ext_ctrls(p, 0))
 			ret = ops->vidioc_s_ext_ctrls(file, fh, p);
 		break;
@@ -1529,10 +1544,13 @@ static long __video_do_ioctl(struct file *file,
 		struct v4l2_ext_controls *p = arg;
 
 		p->error_idx = p->count;
-		if (!vfd->ctrl_handler && !ops->vidioc_try_ext_ctrls)
+		if (!(vfh && vfh->ctrl_handler) && !vfd->ctrl_handler &&
+				!ops->vidioc_try_ext_ctrls)
 			break;
 		v4l_print_ext_ctrls(cmd, vfd, p, 1);
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_try_ext_ctrls(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_try_ext_ctrls(vfd->ctrl_handler, p);
 		else if (check_ext_ctrls(p, 0))
 			ret = ops->vidioc_try_ext_ctrls(file, fh, p);
@@ -1542,7 +1560,9 @@ static long __video_do_ioctl(struct file *file,
 	{
 		struct v4l2_querymenu *p = arg;
 
-		if (vfd->ctrl_handler)
+		if (vfh && vfh->ctrl_handler)
+			ret = v4l2_querymenu(vfh->ctrl_handler, p);
+		else if (vfd->ctrl_handler)
 			ret = v4l2_querymenu(vfd->ctrl_handler, p);
 		else if (ops->vidioc_querymenu)
 			ret = ops->vidioc_querymenu(file, fh, p);
@@ -2276,7 +2296,7 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
 				break;
 			}
 			*user_ptr = (void __user *)buf->m.planes;
-			*kernel_ptr = (void **)&buf->m.planes;
+			*kernel_ptr = (void *)&buf->m.planes;
 			*array_size = sizeof(struct v4l2_plane) * buf->length;
 			ret = 1;
 		}
@@ -2290,7 +2310,7 @@ static int check_array_args(unsigned int cmd, void *parg, size_t *array_size,
 
 		if (ctrls->count != 0) {
 			*user_ptr = (void __user *)ctrls->controls;
-			*kernel_ptr = (void **)&ctrls->controls;
+			*kernel_ptr = (void *)&ctrls->controls;
 			*array_size = sizeof(struct v4l2_ext_control)
 				    * ctrls->count;
 			ret = 1;
diff --git a/drivers/media/video/v4l2-subdev.c b/drivers/media/video/v4l2-subdev.c
index 812729ebf09..b7967c9dc4a 100644
--- a/drivers/media/video/v4l2-subdev.c
+++ b/drivers/media/video/v4l2-subdev.c
@@ -75,20 +75,7 @@ static int subdev_open(struct file *file)
 		return ret;
 	}
 
-	ret = v4l2_fh_init(&subdev_fh->vfh, vdev);
-	if (ret)
-		goto err;
-
-	if (sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) {
-		ret = v4l2_event_init(&subdev_fh->vfh);
-		if (ret)
-			goto err;
-
-		ret = v4l2_event_alloc(&subdev_fh->vfh, sd->nevents);
-		if (ret)
-			goto err;
-	}
-
+	v4l2_fh_init(&subdev_fh->vfh, vdev);
 	v4l2_fh_add(&subdev_fh->vfh);
 	file->private_data = &subdev_fh->vfh;
 #if defined(CONFIG_MEDIA_CONTROLLER)
@@ -155,25 +142,25 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 	switch (cmd) {
 	case VIDIOC_QUERYCTRL:
-		return v4l2_queryctrl(sd->ctrl_handler, arg);
+		return v4l2_queryctrl(vfh->ctrl_handler, arg);
 
 	case VIDIOC_QUERYMENU:
-		return v4l2_querymenu(sd->ctrl_handler, arg);
+		return v4l2_querymenu(vfh->ctrl_handler, arg);
 
 	case VIDIOC_G_CTRL:
-		return v4l2_g_ctrl(sd->ctrl_handler, arg);
+		return v4l2_g_ctrl(vfh->ctrl_handler, arg);
 
 	case VIDIOC_S_CTRL:
-		return v4l2_s_ctrl(sd->ctrl_handler, arg);
+		return v4l2_s_ctrl(vfh, vfh->ctrl_handler, arg);
 
 	case VIDIOC_G_EXT_CTRLS:
-		return v4l2_g_ext_ctrls(sd->ctrl_handler, arg);
+		return v4l2_g_ext_ctrls(vfh->ctrl_handler, arg);
 
 	case VIDIOC_S_EXT_CTRLS:
-		return v4l2_s_ext_ctrls(sd->ctrl_handler, arg);
+		return v4l2_s_ext_ctrls(vfh, vfh->ctrl_handler, arg);
 
 	case VIDIOC_TRY_EXT_CTRLS:
-		return v4l2_try_ext_ctrls(sd->ctrl_handler, arg);
+		return v4l2_try_ext_ctrls(vfh->ctrl_handler, arg);
 
 	case VIDIOC_DQEVENT:
 		if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS))
@@ -297,7 +284,7 @@ static unsigned int subdev_poll(struct file *file, poll_table *wait)
 	if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS))
 		return POLLERR;
 
-	poll_wait(file, &fh->events->wait, wait);
+	poll_wait(file, &fh->wait, wait);
 
 	if (v4l2_event_pending(fh))
 		return POLLPRI;
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index ddb8f4b46c0..f300deafd26 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -108,8 +108,9 @@ static struct scatterlist *videobuf_pages_to_sg(struct page **pages,
 	if (PageHighMem(pages[0]))
 		/* DMA to highmem pages might not work */
 		goto highmem;
-	sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset);
-	size -= PAGE_SIZE - offset;
+	sg_set_page(&sglist[0], pages[0],
+			min_t(size_t, PAGE_SIZE - offset, size), offset);
+	size -= min_t(size_t, PAGE_SIZE - offset, size);
 	for (i = 1; i < nr_pages; i++) {
 		if (NULL == pages[i])
 			goto nopage;
diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c
index 10a20d9509d..065f468faf8 100644
--- a/drivers/media/video/videobuf2-dma-sg.c
+++ b/drivers/media/video/videobuf2-dma-sg.c
@@ -48,12 +48,10 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size)
 	buf->sg_desc.size = size;
 	buf->sg_desc.num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
-	buf->sg_desc.sglist = vmalloc(buf->sg_desc.num_pages *
+	buf->sg_desc.sglist = vzalloc(buf->sg_desc.num_pages *
 				      sizeof(*buf->sg_desc.sglist));
 	if (!buf->sg_desc.sglist)
 		goto fail_sglist_alloc;
-	memset(buf->sg_desc.sglist, 0, buf->sg_desc.num_pages *
-	       sizeof(*buf->sg_desc.sglist));
 	sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages);
 
 	buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *),
@@ -136,13 +134,11 @@ static void *vb2_dma_sg_get_userptr(void *alloc_ctx, unsigned long vaddr,
 	last  = ((vaddr + size - 1) & PAGE_MASK) >> PAGE_SHIFT;
 	buf->sg_desc.num_pages = last - first + 1;
 
-	buf->sg_desc.sglist = vmalloc(
+	buf->sg_desc.sglist = vzalloc(
 		buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist));
 	if (!buf->sg_desc.sglist)
 		goto userptr_fail_sglist_alloc;
 
-	memset(buf->sg_desc.sglist, 0,
-		buf->sg_desc.num_pages * sizeof(*buf->sg_desc.sglist));
 	sg_init_table(buf->sg_desc.sglist, buf->sg_desc.num_pages);
 
 	buf->pages = kzalloc(buf->sg_desc.num_pages * sizeof(struct page *),
diff --git a/drivers/media/video/videobuf2-memops.c b/drivers/media/video/videobuf2-memops.c
index b03c3aea5be..569eeb3dfd5 100644
--- a/drivers/media/video/videobuf2-memops.c
+++ b/drivers/media/video/videobuf2-memops.c
@@ -176,7 +176,7 @@ int vb2_mmap_pfn_range(struct vm_area_struct *vma, unsigned long paddr,
 
 	vma->vm_ops->open(vma);
 
-	printk(KERN_DEBUG "%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n",
+	pr_debug("%s: mapped paddr 0x%08lx at 0x%08lx, size %ld\n",
 			__func__, paddr, vma->vm_start, size);
 
 	return 0;
@@ -194,7 +194,7 @@ static void vb2_common_vm_open(struct vm_area_struct *vma)
 {
 	struct vb2_vmarea_handler *h = vma->vm_private_data;
 
-	printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n",
+	pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n",
 	       __func__, h, atomic_read(h->refcount), vma->vm_start,
 	       vma->vm_end);
 
@@ -212,7 +212,7 @@ static void vb2_common_vm_close(struct vm_area_struct *vma)
 {
 	struct vb2_vmarea_handler *h = vma->vm_private_data;
 
-	printk(KERN_DEBUG "%s: %p, refcount: %d, vma: %08lx-%08lx\n",
+	pr_debug("%s: %p, refcount: %d, vma: %08lx-%08lx\n",
 	       __func__, h, atomic_read(h->refcount), vma->vm_start,
 	       vma->vm_end);
 
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index d63e9d97849..52a0a3736c8 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -36,7 +36,6 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/time.h>
-#include <linux/version.h>
 #include <linux/kmod.h>
 
 #include <linux/i2c.h>
@@ -61,8 +60,7 @@
 // #define VINO_DEBUG
 // #define VINO_DEBUG_INT
 
-#define VINO_MODULE_VERSION "0.0.6"
-#define VINO_VERSION_CODE KERNEL_VERSION(0, 0, 6)
+#define VINO_MODULE_VERSION "0.0.7"
 
 MODULE_DESCRIPTION("SGI VINO Video4Linux2 driver");
 MODULE_VERSION(VINO_MODULE_VERSION);
@@ -2934,7 +2932,6 @@ static int vino_querycap(struct file *file, void *__fh,
 	strcpy(cap->driver, vino_driver_name);
 	strcpy(cap->card, vino_driver_description);
 	strcpy(cap->bus_info, vino_bus_name);
-	cap->version = VINO_VERSION_CODE;
 	cap->capabilities =
 		V4L2_CAP_VIDEO_CAPTURE |
 		V4L2_CAP_STREAMING;
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 2238a613d66..a848bd2af97 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -22,7 +22,6 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/font.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/videodev2.h>
 #include <linux/kthread.h>
@@ -32,6 +31,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-common.h>
 
 #define VIVI_MODULE_NAME "vivi"
@@ -44,15 +44,12 @@
 #define MAX_WIDTH 1920
 #define MAX_HEIGHT 1200
 
-#define VIVI_MAJOR_VERSION 0
-#define VIVI_MINOR_VERSION 8
-#define VIVI_RELEASE 0
-#define VIVI_VERSION \
-	KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE)
+#define VIVI_VERSION "0.8.1"
 
 MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board");
 MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
 MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(VIVI_VERSION);
 
 static unsigned video_nr = -1;
 module_param(video_nr, uint, 0644);
@@ -167,6 +164,11 @@ struct vivi_dev {
 	struct v4l2_ctrl	   *contrast;
 	struct v4l2_ctrl	   *saturation;
 	struct v4l2_ctrl	   *hue;
+	struct {
+		/* autogain/gain cluster */
+		struct v4l2_ctrl	   *autogain;
+		struct v4l2_ctrl	   *gain;
+	};
 	struct v4l2_ctrl	   *volume;
 	struct v4l2_ctrl	   *button;
 	struct v4l2_ctrl	   *boolean;
@@ -174,6 +176,7 @@ struct vivi_dev {
 	struct v4l2_ctrl	   *int64;
 	struct v4l2_ctrl	   *menu;
 	struct v4l2_ctrl	   *string;
+	struct v4l2_ctrl	   *bitmask;
 
 	spinlock_t                 slock;
 	struct mutex		   mutex;
@@ -457,6 +460,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 	unsigned ms;
 	char str[100];
 	int h, line = 1;
+	s32 gain;
 
 	if (!vbuf)
 		return;
@@ -479,6 +483,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 			dev->width, dev->height, dev->input);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 
+	gain = v4l2_ctrl_g_ctrl(dev->gain);
 	mutex_lock(&dev->ctrl_handler.lock);
 	snprintf(str, sizeof(str), " brightness %3d, contrast %3d, saturation %3d, hue %d ",
 			dev->brightness->cur.val,
@@ -486,11 +491,13 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
 			dev->saturation->cur.val,
 			dev->hue->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
-	snprintf(str, sizeof(str), " volume %3d ", dev->volume->cur.val);
+	snprintf(str, sizeof(str), " autogain %d, gain %3d, volume %3d ",
+			dev->autogain->cur.val, gain, dev->volume->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
-	snprintf(str, sizeof(str), " int32 %d, int64 %lld ",
+	snprintf(str, sizeof(str), " int32 %d, int64 %lld, bitmask %08x ",
 			dev->int32->cur.val,
-			dev->int64->cur.val64);
+			dev->int64->cur.val64,
+			dev->bitmask->cur.val);
 	gen_text(dev, vbuf, line++ * 16, 16, str);
 	snprintf(str, sizeof(str), " boolean %d, menu %s, string \"%s\" ",
 			dev->boolean->cur.val,
@@ -524,11 +531,13 @@ static void vivi_thread_tick(struct vivi_dev *dev)
 	spin_lock_irqsave(&dev->slock, flags);
 	if (list_empty(&dma_q->active)) {
 		dprintk(dev, 1, "No active queue to serve\n");
-		goto unlock;
+		spin_unlock_irqrestore(&dev->slock, flags);
+		return;
 	}
 
 	buf = list_entry(dma_q->active.next, struct vivi_buffer, list);
 	list_del(&buf->list);
+	spin_unlock_irqrestore(&dev->slock, flags);
 
 	do_gettimeofday(&buf->vb.v4l2_buf.timestamp);
 
@@ -538,8 +547,6 @@ static void vivi_thread_tick(struct vivi_dev *dev)
 
 	vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
 	dprintk(dev, 2, "[%p/%d] done\n", buf, buf->vb.v4l2_buf.index);
-unlock:
-	spin_unlock_irqrestore(&dev->slock, flags);
 }
 
 #define frames_to_ms(frames)					\
@@ -812,7 +819,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strcpy(cap->driver, "vivi");
 	strcpy(cap->card, "vivi");
 	strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info));
-	cap->version = VIVI_VERSION;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | \
 			    V4L2_CAP_READWRITE;
 	return 0;
@@ -975,14 +981,37 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	if (i >= NUM_INPUTS)
 		return -EINVAL;
 
+	if (i == dev->input)
+		return 0;
+
 	dev->input = i;
 	precalculate_bars(dev);
 	precalculate_line(dev);
 	return 0;
 }
 
+static int vidioc_subscribe_event(struct v4l2_fh *fh,
+				struct v4l2_event_subscription *sub)
+{
+	switch (sub->type) {
+	case V4L2_EVENT_CTRL:
+		return v4l2_event_subscribe(fh, sub, 0);
+	default:
+		return -EINVAL;
+	}
+}
+
 /* --- controls ---------------------------------------------- */
 
+static int vivi_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler);
+
+	if (ctrl == dev->autogain)
+		dev->gain->val = jiffies & 0xff;
+	return 0;
+}
+
 static int vivi_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct vivi_dev *dev = container_of(ctrl->handler, struct vivi_dev, ctrl_handler);
@@ -1010,10 +1039,17 @@ static unsigned int
 vivi_poll(struct file *file, struct poll_table_struct *wait)
 {
 	struct vivi_dev *dev = video_drvdata(file);
+	struct v4l2_fh *fh = file->private_data;
 	struct vb2_queue *q = &dev->vb_vidq;
+	unsigned int res;
 
 	dprintk(dev, 1, "%s\n", __func__);
-	return vb2_poll(q, file, wait);
+	res = vb2_poll(q, file, wait);
+	if (v4l2_event_pending(fh))
+		res |= POLLPRI;
+	else
+		poll_wait(file, &fh->wait, wait);
+	return res;
 }
 
 static int vivi_close(struct file *file)
@@ -1045,6 +1081,7 @@ static int vivi_mmap(struct file *file, struct vm_area_struct *vma)
 }
 
 static const struct v4l2_ctrl_ops vivi_ctrl_ops = {
+	.g_volatile_ctrl = vivi_g_volatile_ctrl,
 	.s_ctrl = vivi_s_ctrl,
 };
 
@@ -1117,9 +1154,20 @@ static const struct v4l2_ctrl_config vivi_ctrl_string = {
 	.step = 1,
 };
 
+static const struct v4l2_ctrl_config vivi_ctrl_bitmask = {
+	.ops = &vivi_ctrl_ops,
+	.id = VIVI_CID_CUSTOM_BASE + 6,
+	.name = "Bitmask",
+	.type = V4L2_CTRL_TYPE_BITMASK,
+	.def = 0x80002000,
+	.min = 0,
+	.max = 0x80402010,
+	.step = 0,
+};
+
 static const struct v4l2_file_operations vivi_fops = {
 	.owner		= THIS_MODULE,
-	.open		= v4l2_fh_open,
+	.open           = v4l2_fh_open,
 	.release        = vivi_close,
 	.read           = vivi_read,
 	.poll		= vivi_poll,
@@ -1143,6 +1191,8 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = {
 	.vidioc_s_input       = vidioc_s_input,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
+	.vidioc_subscribe_event = vidioc_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
 static struct video_device vivi_template = {
@@ -1213,16 +1263,22 @@ static int __init vivi_create_instance(int inst)
 			V4L2_CID_SATURATION, 0, 255, 1, 127);
 	dev->hue = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops,
 			V4L2_CID_HUE, -128, 127, 1, 0);
+	dev->autogain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops,
+			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	dev->gain = v4l2_ctrl_new_std(hdl, &vivi_ctrl_ops,
+			V4L2_CID_GAIN, 0, 255, 1, 100);
 	dev->button = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_button, NULL);
 	dev->int32 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int32, NULL);
 	dev->int64 = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_int64, NULL);
 	dev->boolean = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_boolean, NULL);
 	dev->menu = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_menu, NULL);
 	dev->string = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_string, NULL);
+	dev->bitmask = v4l2_ctrl_new_custom(hdl, &vivi_ctrl_bitmask, NULL);
 	if (hdl->error) {
 		ret = hdl->error;
 		goto unreg_dev;
 	}
+	v4l2_ctrl_auto_cluster(2, &dev->autogain, 0, true);
 	dev->v4l2_dev.ctrl_handler = hdl;
 
 	/* initialize locks */
@@ -1325,9 +1381,8 @@ static int __init vivi_init(void)
 	}
 
 	printk(KERN_INFO "Video Technology Magazine Virtual Video "
-			"Capture Board ver %u.%u.%u successfully loaded.\n",
-			(VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF,
-			VIVI_VERSION & 0xFF);
+			"Capture Board ver %s successfully loaded.\n",
+			VIVI_VERSION);
 
 	/* n_devs will reflect the actual number of allocated devices */
 	n_devs = i;
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index fa35639d0c1..453dbbd1e6e 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -57,7 +57,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/slab.h>
 #include <media/v4l2-common.h>
@@ -127,7 +126,7 @@ struct w9966 {
 MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>");
 MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)");
 MODULE_LICENSE("GPL");
-
+MODULE_VERSION("0.33.1");
 
 #ifdef MODULE
 static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""};
@@ -568,7 +567,6 @@ static int cam_querycap(struct file *file, void  *priv,
 	strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver));
 	strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card));
 	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
-	vcap->version = KERNEL_VERSION(0, 33, 0);
 	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
 	return 0;
 }
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index f3f64001492..d7166afc255 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -41,10 +41,6 @@ struct zoran_sync {
 };
 
 
-#define MAJOR_VERSION 0		/* driver major version */
-#define MINOR_VERSION 10	/* driver minor version */
-#define RELEASE_VERSION 0	/* release version */
-
 #define ZORAN_NAME    "ZORAN"	/* name of the device */
 
 #define ZR_DEVNAME(zr) ((zr)->name)
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 79b04ac0f1a..c3602d6cd48 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -123,9 +123,12 @@ int zr36067_debug = 1;
 module_param_named(debug, zr36067_debug, int, 0644);
 MODULE_PARM_DESC(debug, "Debug level (0-5)");
 
+#define ZORAN_VERSION "0.10.1"
+
 MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver");
 MODULE_AUTHOR("Serguei Miridonov");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(ZORAN_VERSION);
 
 #define ZR_DEVICE(subven, subdev, data)	{ \
 	.vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \
@@ -1459,8 +1462,8 @@ static int __init zoran_init(void)
 {
 	int res;
 
-	printk(KERN_INFO "Zoran MJPEG board driver version %d.%d.%d\n",
-	       MAJOR_VERSION, MINOR_VERSION, RELEASE_VERSION);
+	printk(KERN_INFO "Zoran MJPEG board driver version %s\n",
+	       ZORAN_VERSION);
 
 	/* check the parameters we have been given, adjust if necessary */
 	if (v4l_nbufs < 2)
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 2771d818406..d4d05d2ace6 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -44,7 +44,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/delay.h>
@@ -1538,8 +1537,6 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability
 	strncpy(cap->driver, "zoran", sizeof(cap->driver)-1);
 	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
 		 pci_name(zr->pci_dev));
-	cap->version = KERNEL_VERSION(MAJOR_VERSION, MINOR_VERSION,
-			   RELEASE_VERSION);
 	cap->capabilities = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
 			    V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_VIDEO_OVERLAY;
 	return 0;
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 7dfb01e9930..c492846c1c5 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -29,7 +29,6 @@
 
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/usb.h>
 #include <linux/vmalloc.h>
@@ -42,8 +41,7 @@
 
 
 /* Version Information */
-#define DRIVER_VERSION "v0.73"
-#define ZR364XX_VERSION_CODE KERNEL_VERSION(0, 7, 3)
+#define DRIVER_VERSION "0.7.4"
 #define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/"
 #define DRIVER_DESC "Zoran 364xx"
 
@@ -744,7 +742,6 @@ static int zr364xx_vidioc_querycap(struct file *file, void *priv,
 	strlcpy(cap->card, cam->udev->product, sizeof(cap->card));
 	strlcpy(cap->bus_info, dev_name(&cam->udev->dev),
 		sizeof(cap->bus_info));
-	cap->version = ZR364XX_VERSION_CODE;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
 			    V4L2_CAP_READWRITE |
 			    V4L2_CAP_STREAMING;
@@ -1721,3 +1718,4 @@ module_exit(zr364xx_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 69272e4e345..696879e2eef 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -287,12 +287,8 @@ static __devinitdata struct i2c_board_info timberdale_saa7706_i2c_board_info = {
 static __devinitdata struct timb_radio_platform_data
 	timberdale_radio_platform_data = {
 	.i2c_adapter = 0,
-	.tuner = {
-		.info = &timberdale_tef6868_i2c_board_info
-	},
-	.dsp = {
-		.info = &timberdale_saa7706_i2c_board_info
-	}
+	.tuner = &timberdale_tef6868_i2c_board_info,
+	.dsp = &timberdale_saa7706_i2c_board_info
 };
 
 static const __devinitconst struct resource timberdale_video_resources[] = {
diff --git a/drivers/staging/cxd2099/Kconfig b/drivers/staging/cxd2099/Kconfig
index 9d638c30735..b48aefddc84 100644
--- a/drivers/staging/cxd2099/Kconfig
+++ b/drivers/staging/cxd2099/Kconfig
@@ -1,9 +1,10 @@
 config DVB_CXD2099
-        tristate "CXD2099AR Common Interface driver"
-        depends on DVB_CORE && PCI && I2C && DVB_NGENE
-        ---help---
-          Support for the CI module found on cineS2 DVB-S2, supported by
-	  the Micronas PCIe device driver (ngene).
+	tristate "CXD2099AR Common Interface driver"
+	depends on DVB_CORE && PCI && I2C
+	---help---
+	  Support for the CI module found on cards based on
+	  - Micronas ngene PCIe bridge: cineS2 etc.
+	  - Digital Devices PCIe bridge: Octopus series
 
 	  For now, data is passed through '/dev/dvb/adapterX/sec0':
 	    - Encrypted data must be written to 'sec0'.
diff --git a/drivers/staging/cxd2099/cxd2099.c b/drivers/staging/cxd2099/cxd2099.c
index 55b1c4a5903..1c04185bcfd 100644
--- a/drivers/staging/cxd2099/cxd2099.c
+++ b/drivers/staging/cxd2099/cxd2099.c
@@ -1,7 +1,7 @@
 /*
  * cxd2099.c: Driver for the CXD2099AR Common Interface Controller
  *
- * Copyright (C) 2010 DigitalDevices UG
+ * Copyright (C) 2010-2011 Digital Devices GmbH
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -41,13 +41,13 @@ struct cxd {
 	struct dvb_ca_en50221 en;
 
 	struct i2c_adapter *i2c;
-	u8     adr;
+	struct cxd2099_cfg cfg;
+
 	u8     regs[0x23];
 	u8     lastaddress;
 	u8     clk_reg_f;
 	u8     clk_reg_b;
 	int    mode;
-	u32    bitrate;
 	int    ready;
 	int    dr;
 	int    slot_stat;
@@ -89,9 +89,9 @@ static int i2c_read_reg(struct i2c_adapter *adapter, u8 adr,
 			u8 reg, u8 *val)
 {
 	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf = &reg, .len = 1 },
+				   .buf = &reg, .len = 1},
 				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf = val, .len = 1 } };
+				   .buf = val, .len = 1} };
 
 	if (i2c_transfer(adapter, msgs, 2) != 2) {
 		printk(KERN_ERR "error in i2c_read_reg\n");
@@ -104,9 +104,9 @@ static int i2c_read(struct i2c_adapter *adapter, u8 adr,
 		    u8 reg, u8 *data, u8 n)
 {
 	struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0,
-				   .buf = &reg, .len = 1 },
-				  {.addr = adr, .flags = I2C_M_RD,
-				   .buf = data, .len = n } };
+				 .buf = &reg, .len = 1},
+				{.addr = adr, .flags = I2C_M_RD,
+				 .buf = data, .len = n} };
 
 	if (i2c_transfer(adapter, msgs, 2) != 2) {
 		printk(KERN_ERR "error in i2c_read\n");
@@ -119,10 +119,10 @@ static int read_block(struct cxd *ci, u8 adr, u8 *data, u8 n)
 {
 	int status;
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
 	if (!status) {
 		ci->lastaddress = adr;
-		status = i2c_read(ci->i2c, ci->adr, 1, data, n);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 1, data, n);
 	}
 	return status;
 }
@@ -136,24 +136,24 @@ static int read_reg(struct cxd *ci, u8 reg, u8 *val)
 static int read_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_read(ci->i2c, ci->adr, 3, data, n);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
 	return status;
 }
 
 static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status) {
 		u8 buf[256] = {3};
 		memcpy(buf+1, data, n);
-		status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n+1);
 	}
 	return status;
 }
@@ -161,39 +161,64 @@ static int write_pccard(struct cxd *ci, u16 address, u8 *data, u8 n)
 static int read_io(struct cxd *ci, u16 address, u8 *val)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_read(ci->i2c, ci->adr, 3, val, 1);
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, val, 1);
 	return status;
 }
 
 static int write_io(struct cxd *ci, u16 address, u8 val)
 {
 	int status;
-	u8 addr[3] = { 2, address&0xff, address>>8 };
-	u8 buf[2] = { 3, val };
+	u8 addr[3] = {2, address & 0xff, address >> 8};
+	u8 buf[2] = {3, val};
 
-	status = i2c_write(ci->i2c, ci->adr, addr, 3);
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
 	if (!status)
-		status = i2c_write(ci->i2c, ci->adr, buf, 2);
-
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, 2);
 	return status;
 }
 
+#if 0
+static int read_io_data(struct cxd *ci, u8 *data, u8 n)
+{
+	int status;
+	u8 addr[3] = { 2, 0, 0 };
+
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
+	if (!status)
+		status = i2c_read(ci->i2c, ci->cfg.adr, 3, data, n);
+	return 0;
+}
+
+static int write_io_data(struct cxd *ci, u8 *data, u8 n)
+{
+	int status;
+	u8 addr[3] = {2, 0, 0};
+
+	status = i2c_write(ci->i2c, ci->cfg.adr, addr, 3);
+	if (!status) {
+		u8 buf[256] = {3};
+		memcpy(buf+1, data, n);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
+	}
+	return 0;
+}
+#endif
 
 static int write_regm(struct cxd *ci, u8 reg, u8 val, u8 mask)
 {
 	int status;
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, reg);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, reg);
 	if (!status && reg >= 6 && reg <= 8 && mask != 0xff)
-		status = i2c_read_reg(ci->i2c, ci->adr, 1, &ci->regs[reg]);
-	ci->regs[reg] = (ci->regs[reg]&(~mask))|val;
+		status = i2c_read_reg(ci->i2c, ci->cfg.adr, 1, &ci->regs[reg]);
+	ci->regs[reg] = (ci->regs[reg] & (~mask)) | val;
 	if (!status) {
 		ci->lastaddress = reg;
-		status = i2c_write_reg(ci->i2c, ci->adr, 1, ci->regs[reg]);
+		status = i2c_write_reg(ci->i2c, ci->cfg.adr, 1, ci->regs[reg]);
 	}
 	if (reg == 0x20)
 		ci->regs[reg] &= 0x7f;
@@ -211,11 +236,11 @@ static int write_block(struct cxd *ci, u8 adr, u8 *data, int n)
 	int status;
 	u8 buf[256] = {1};
 
-	status = i2c_write_reg(ci->i2c, ci->adr, 0, adr);
+	status = i2c_write_reg(ci->i2c, ci->cfg.adr, 0, adr);
 	if (!status) {
 		ci->lastaddress = adr;
-		memcpy(buf+1, data, n);
-		status = i2c_write(ci->i2c, ci->adr, buf, n+1);
+		memcpy(buf + 1, data, n);
+		status = i2c_write(ci->i2c, ci->cfg.adr, buf, n + 1);
 	}
 	return status;
 }
@@ -249,12 +274,16 @@ static void cam_mode(struct cxd *ci, int mode)
 		write_regm(ci, 0x20, 0x80, 0x80);
 		break;
 	case 0x01:
+#ifdef BUFFER_MODE
+		if (!ci->en.read_data)
+			return;
 		printk(KERN_INFO "enable cam buffer mode\n");
 		/* write_reg(ci, 0x0d, 0x00); */
 		/* write_reg(ci, 0x0e, 0x01); */
 		write_regm(ci, 0x08, 0x40, 0x40);
 		/* read_reg(ci, 0x12, &dummy); */
 		write_regm(ci, 0x08, 0x80, 0x80);
+#endif
 		break;
 	default:
 		break;
@@ -264,8 +293,6 @@ static void cam_mode(struct cxd *ci, int mode)
 
 
 
-#define CHK_ERROR(s) if ((status = s)) break
-
 static int init(struct cxd *ci)
 {
 	int status;
@@ -273,63 +300,160 @@ static int init(struct cxd *ci)
 	mutex_lock(&ci->lock);
 	ci->mode = -1;
 	do {
-		CHK_ERROR(write_reg(ci, 0x00, 0x00));
-		CHK_ERROR(write_reg(ci, 0x01, 0x00));
-		CHK_ERROR(write_reg(ci, 0x02, 0x10));
-		CHK_ERROR(write_reg(ci, 0x03, 0x00));
-		CHK_ERROR(write_reg(ci, 0x05, 0xFF));
-		CHK_ERROR(write_reg(ci, 0x06, 0x1F));
-		CHK_ERROR(write_reg(ci, 0x07, 0x1F));
-		CHK_ERROR(write_reg(ci, 0x08, 0x28));
-		CHK_ERROR(write_reg(ci, 0x14, 0x20));
-
-		CHK_ERROR(write_reg(ci, 0x09, 0x4D)); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
-		CHK_ERROR(write_reg(ci, 0x0A, 0xA7)); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
-
-		/* Sync detector */
-		CHK_ERROR(write_reg(ci, 0x0B, 0x33));
-		CHK_ERROR(write_reg(ci, 0x0C, 0x33));
-
-		CHK_ERROR(write_regm(ci, 0x14, 0x00, 0x0F));
-		CHK_ERROR(write_reg(ci, 0x15, ci->clk_reg_b));
-		CHK_ERROR(write_regm(ci, 0x16, 0x00, 0x0F));
-		CHK_ERROR(write_reg(ci, 0x17, ci->clk_reg_f));
-
-		CHK_ERROR(write_reg(ci, 0x20, 0x28)); /* Integer Divider, Falling Edge, Internal Sync, */
-		CHK_ERROR(write_reg(ci, 0x21, 0x00)); /* MCLKI = TICLK/8 */
-		CHK_ERROR(write_reg(ci, 0x22, 0x07)); /* MCLKI = TICLK/8 */
-
-
-		CHK_ERROR(write_regm(ci, 0x20, 0x80, 0x80)); /* Reset CAM state machine */
-
-		CHK_ERROR(write_regm(ci, 0x03, 0x02, 02));  /* Enable IREQA Interrupt */
-		CHK_ERROR(write_reg(ci, 0x01, 0x04));  /* Enable CD Interrupt */
-		CHK_ERROR(write_reg(ci, 0x00, 0x31));  /* Enable TS1,Hot Swap,Slot A */
-		CHK_ERROR(write_regm(ci, 0x09, 0x08, 0x08));  /* Put TS in bypass */
+		status = write_reg(ci, 0x00, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x01, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x02, 0x10);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x03, 0x00);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x05, 0xFF);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x06, 0x1F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x07, 0x1F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x08, 0x28);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x14, 0x20);
+		if (status < 0)
+			break;
+
+#if 0
+		status = write_reg(ci, 0x09, 0x4D); /* Input Mode C, BYPass Serial, TIVAL = low, MSB */
+		if (status < 0)
+			break;
+#endif
+		status = write_reg(ci, 0x0A, 0xA7); /* TOSTRT = 8, Mode B (gated clock), falling Edge, Serial, POL=HIGH, MSB */
+		if (status < 0)
+			break;
+
+		status = write_reg(ci, 0x0B, 0x33);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x0C, 0x33);
+		if (status < 0)
+			break;
+
+		status = write_regm(ci, 0x14, 0x00, 0x0F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x15, ci->clk_reg_b);
+		if (status < 0)
+			break;
+		status = write_regm(ci, 0x16, 0x00, 0x0F);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x17, ci->clk_reg_f);
+		if (status < 0)
+			break;
+
+		if (ci->cfg.clock_mode) {
+			if (ci->cfg.polarity) {
+				status = write_reg(ci, 0x09, 0x6f);
+				if (status < 0)
+					break;
+			} else {
+				status = write_reg(ci, 0x09, 0x6d);
+				if (status < 0)
+					break;
+			}
+			status = write_reg(ci, 0x20, 0x68);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x21, 0x00);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x22, 0x02);
+			if (status < 0)
+				break;
+		} else {
+			if (ci->cfg.polarity) {
+				status = write_reg(ci, 0x09, 0x4f);
+				if (status < 0)
+					break;
+			} else {
+				status = write_reg(ci, 0x09, 0x4d);
+				if (status < 0)
+					break;
+			}
+
+			status = write_reg(ci, 0x20, 0x28);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x21, 0x00);
+			if (status < 0)
+				break;
+			status = write_reg(ci, 0x22, 0x07);
+			if (status < 0)
+				break;
+		}
+
+		status = write_regm(ci, 0x20, 0x80, 0x80);
+		if (status < 0)
+			break;
+		status = write_regm(ci, 0x03, 0x02, 0x02);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x01, 0x04);
+		if (status < 0)
+			break;
+		status = write_reg(ci, 0x00, 0x31);
+		if (status < 0)
+			break;
+
+		/* Put TS in bypass */
+		status = write_regm(ci, 0x09, 0x08, 0x08);
+		if (status < 0)
+			break;
 		ci->cammode = -1;
-#ifdef BUFFER_MODE
 		cam_mode(ci, 0);
-#endif
 	} while (0);
 	mutex_unlock(&ci->lock);
 
 	return 0;
 }
 
-
 static int read_attribute_mem(struct dvb_ca_en50221 *ca,
 			      int slot, int address)
 {
 	struct cxd *ci = ca->data;
+#if 0
+	if (ci->amem_read) {
+		if (address <= 0 || address > 1024)
+			return -EIO;
+		return ci->amem[address];
+	}
+
+	mutex_lock(&ci->lock);
+	write_regm(ci, 0x06, 0x00, 0x05);
+	read_pccard(ci, 0, &ci->amem[0], 128);
+	read_pccard(ci, 128, &ci->amem[0], 128);
+	read_pccard(ci, 256, &ci->amem[0], 128);
+	read_pccard(ci, 384, &ci->amem[0], 128);
+	write_regm(ci, 0x06, 0x05, 0x05);
+	mutex_unlock(&ci->lock);
+	return ci->amem[address];
+#else
 	u8 val;
 	mutex_lock(&ci->lock);
 	set_mode(ci, 1);
 	read_pccard(ci, address, &val, 1);
 	mutex_unlock(&ci->lock);
+	/* printk(KERN_INFO "%02x:%02x\n", address,val); */
 	return val;
+#endif
 }
 
-
 static int write_attribute_mem(struct dvb_ca_en50221 *ca, int slot,
 			       int address, u8 value)
 {
@@ -372,6 +496,15 @@ static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	struct cxd *ci = ca->data;
 
 	mutex_lock(&ci->lock);
+#if 0
+	write_reg(ci, 0x00, 0x21);
+	write_reg(ci, 0x06, 0x1F);
+	write_reg(ci, 0x00, 0x31);
+#else
+#if 0
+	write_reg(ci, 0x06, 0x1F);
+	write_reg(ci, 0x06, 0x2F);
+#else
 	cam_mode(ci, 0);
 	write_reg(ci, 0x00, 0x21);
 	write_reg(ci, 0x06, 0x1F);
@@ -379,13 +512,25 @@ static int slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	write_regm(ci, 0x20, 0x80, 0x80);
 	write_reg(ci, 0x03, 0x02);
 	ci->ready = 0;
+#endif
+#endif
 	ci->mode = -1;
 	{
 		int i;
+#if 0
+		u8 val;
+#endif
 		for (i = 0; i < 100; i++) {
 			msleep(10);
+#if 0
+			read_reg(ci, 0x06, &val);
+			printk(KERN_INFO "%d:%02x\n", i, val);
+			if (!(val&0x10))
+				break;
+#else
 			if (ci->ready)
 				break;
+#endif
 		}
 	}
 	mutex_unlock(&ci->lock);
@@ -399,12 +544,12 @@ static int slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
 
 	printk(KERN_INFO "slot_shutdown\n");
 	mutex_lock(&ci->lock);
-	/* write_regm(ci, 0x09, 0x08, 0x08); */
-	write_regm(ci, 0x20, 0x80, 0x80);
-	write_regm(ci, 0x06, 0x07, 0x07);
+	write_regm(ci, 0x09, 0x08, 0x08);
+	write_regm(ci, 0x20, 0x80, 0x80); /* Reset CAM Mode */
+	write_regm(ci, 0x06, 0x07, 0x07); /* Clear IO Mode */
 	ci->mode = -1;
 	mutex_unlock(&ci->lock);
-	return 0; /* shutdown(ci); */
+	return 0;
 }
 
 static int slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
@@ -459,7 +604,6 @@ static int campoll(struct cxd *ci)
 		if (istat&8 && ci->slot_stat == DVB_CA_EN50221_POLL_CAM_PRESENT) {
 			ci->ready = 1;
 			ci->slot_stat |= DVB_CA_EN50221_POLL_CAM_READY;
-			printk(KERN_INFO "READY\n");
 		}
 	}
 	return 0;
@@ -510,7 +654,7 @@ static int write_data(struct dvb_ca_en50221 *ca, int slot, u8 *ebuf, int ecount)
 	struct cxd *ci = ca->data;
 
 	mutex_lock(&ci->lock);
-	printk(KERN_INFO "write_data %d\n", ecount);
+	printk(kern_INFO "write_data %d\n", ecount);
 	write_reg(ci, 0x0d, ecount>>8);
 	write_reg(ci, 0x0e, ecount&0xff);
 	write_block(ci, 0x11, ebuf, ecount);
@@ -535,15 +679,15 @@ static struct dvb_ca_en50221 en_templ = {
 
 };
 
-struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
+struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+				      void *priv,
 				      struct i2c_adapter *i2c)
 {
 	struct cxd *ci = 0;
-	u32 bitrate = 62000000;
 	u8 val;
 
-	if (i2c_read_reg(i2c, adr, 0, &val) < 0) {
-		printk(KERN_ERR "No CXD2099 detected at %02x\n", adr);
+	if (i2c_read_reg(i2c, cfg->adr, 0, &val) < 0) {
+		printk(KERN_INFO "No CXD2099 detected at %02x\n", cfg->adr);
 		return 0;
 	}
 
@@ -553,21 +697,20 @@ struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv,
 	memset(ci, 0, sizeof(*ci));
 
 	mutex_init(&ci->lock);
+	memcpy(&ci->cfg, cfg, sizeof(struct cxd2099_cfg));
 	ci->i2c = i2c;
-	ci->adr = adr;
 	ci->lastaddress = 0xff;
 	ci->clk_reg_b = 0x4a;
 	ci->clk_reg_f = 0x1b;
-	ci->bitrate = bitrate;
 
 	memcpy(&ci->en, &en_templ, sizeof(en_templ));
 	ci->en.data = ci;
 	init(ci);
-	printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->adr);
+	printk(KERN_INFO "Attached CXD2099AR at %02x\n", ci->cfg.adr);
 	return &ci->en;
 }
 EXPORT_SYMBOL(cxd2099_attach);
 
 MODULE_DESCRIPTION("cxd2099");
-MODULE_AUTHOR("Ralph Metzler <rjkm@metzlerbros.de>");
+MODULE_AUTHOR("Ralph Metzler");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/cxd2099/cxd2099.h b/drivers/staging/cxd2099/cxd2099.h
index bed54ff3e30..19c588a5958 100644
--- a/drivers/staging/cxd2099/cxd2099.h
+++ b/drivers/staging/cxd2099/cxd2099.h
@@ -1,7 +1,7 @@
 /*
  * cxd2099.h: Driver for the CXD2099AR Common Interface Controller
  *
- * Copyright (C) 2010 DigitalDevices UG
+ * Copyright (C) 2010-2011 Digital Devices GmbH
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -27,11 +27,21 @@
 
 #include <dvb_ca_en50221.h>
 
+struct cxd2099_cfg {
+	u32 bitrate;
+	u8  adr;
+	u8  polarity:1;
+	u8  clock_mode:1;
+};
+
 #if defined(CONFIG_DVB_CXD2099) || \
-        (defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
-struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c);
+	(defined(CONFIG_DVB_CXD2099_MODULE) && defined(MODULE))
+struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+				      void *priv, struct i2c_adapter *i2c);
 #else
-static inline struct dvb_ca_en50221 *cxd2099_attach(u8 adr, void *priv, struct i2c_adapter *i2c)
+
+static inline struct dvb_ca_en50221 *cxd2099_attach(struct cxd2099_cfg *cfg,
+					void *priv, struct i2c_adapter *i2c)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
diff --git a/drivers/staging/tm6000/tm6000-alsa.c b/drivers/staging/tm6000/tm6000-alsa.c
index ddfd7c33361..bd5fa89af07 100644
--- a/drivers/staging/tm6000/tm6000-alsa.c
+++ b/drivers/staging/tm6000/tm6000-alsa.c
@@ -84,7 +84,6 @@ static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 
 	tm6000_set_audio_bitrate(core, 48000);
 
-
 	return 0;
 }
 
@@ -123,6 +122,7 @@ static int dsp_buffer_alloc(struct snd_pcm_substream *substream, int size)
 	if (substream->runtime->dma_area) {
 		if (substream->runtime->dma_bytes > size)
 			return 0;
+
 		dsp_buffer_free(substream);
 	}
 
@@ -152,9 +152,9 @@ static struct snd_pcm_hardware snd_tm6000_digital_hw = {
 		SNDRV_PCM_INFO_MMAP_VALID,
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 
-	.rates =		SNDRV_PCM_RATE_CONTINUOUS,
-	.rate_min =		48000,
-	.rate_max =		48000,
+	.rates = SNDRV_PCM_RATE_CONTINUOUS,
+	.rate_min = 48000,
+	.rate_max = 48000,
 	.channels_min = 2,
 	.channels_max = 2,
 	.period_bytes_min = 64,
@@ -254,9 +254,7 @@ static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
 		memcpy(runtime->dma_area + buf_pos * stride, buf,
 			length * stride);
 
-#ifndef NO_PCM_LOCK
 	snd_pcm_stream_lock(substream);
-#endif
 
 	chip->buf_pos += length;
 	if (chip->buf_pos >= runtime->buffer_size)
@@ -268,9 +266,7 @@ static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size)
 		period_elapsed = 1;
 	}
 
-#ifndef NO_PCM_LOCK
 	snd_pcm_stream_unlock(substream);
-#endif
 
 	if (period_elapsed)
 		snd_pcm_period_elapsed(substream);
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 5e807f083bc..52f8f9e513a 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -124,24 +124,12 @@ uvc_v4l2_open(struct file *file)
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
 	struct uvc_file_handle *handle;
-	int ret;
 
 	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
 	if (handle == NULL)
 		return -ENOMEM;
 
-	ret = v4l2_fh_init(&handle->vfh, vdev);
-	if (ret < 0)
-		goto error;
-
-	ret = v4l2_event_init(&handle->vfh);
-	if (ret < 0)
-		goto error;
-
-	ret = v4l2_event_alloc(&handle->vfh, 8);
-	if (ret < 0)
-		goto error;
-
+	v4l2_fh_init(&handle->vfh, vdev);
 	v4l2_fh_add(&handle->vfh);
 
 	handle->device = &uvc->video;
@@ -149,10 +137,6 @@ uvc_v4l2_open(struct file *file)
 
 	uvc_function_connect(uvc);
 	return 0;
-
-error:
-	v4l2_fh_exit(&handle->vfh);
-	return ret;
 }
 
 static int
@@ -314,7 +298,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
 			return -EINVAL;
 
-		return v4l2_event_subscribe(&handle->vfh, arg);
+		return v4l2_event_subscribe(&handle->vfh, arg, 2);
 	}
 
 	case VIDIOC_UNSUBSCRIBE_EVENT:
@@ -354,7 +338,7 @@ uvc_v4l2_poll(struct file *file, poll_table *wait)
 	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
 	unsigned int mask = 0;
 
-	poll_wait(file, &handle->vfh.events->wait, wait);
+	poll_wait(file, &handle->vfh.wait, wait);
 	if (v4l2_event_pending(&handle->vfh))
 		mask |= POLLPRI;
 
diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h
index fec66bd24f2..d47bccd604e 100644
--- a/include/linux/dvb/audio.h
+++ b/include/linux/dvb/audio.h
@@ -67,7 +67,7 @@ typedef struct audio_status {
 
 
 typedef
-struct audio_karaoke{  /* if Vocal1 or Vocal2 are non-zero, they get mixed  */
+struct audio_karaoke {  /* if Vocal1 or Vocal2 are non-zero, they get mixed  */
 	int vocal1;    /* into left and right t at 70% each */
 	int vocal2;    /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/
 	int melody;    /* mixed into the left channel and */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 8a4c309d234..fca24cc5043 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -376,7 +376,16 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
 #define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
 #define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4    */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
+#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
+#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
+#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
+#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
+#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
+#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
+#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
+#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
 
 /*  Vendor-specific formats   */
 #define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
@@ -402,6 +411,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
 #define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
 #define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
+#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
@@ -1026,6 +1036,7 @@ struct v4l2_ext_controls {
 #define V4L2_CTRL_CLASS_MPEG 0x00990000	/* MPEG-compression controls */
 #define V4L2_CTRL_CLASS_CAMERA 0x009a0000	/* Camera class controls */
 #define V4L2_CTRL_CLASS_FM_TX 0x009b0000	/* FM Modulator control class */
+#define V4L2_CTRL_CLASS_FLASH 0x009c0000	/* Camera flash controls */
 
 #define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
 #define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
@@ -1039,6 +1050,7 @@ enum v4l2_ctrl_type {
 	V4L2_CTRL_TYPE_INTEGER64     = 5,
 	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
 	V4L2_CTRL_TYPE_STRING        = 7,
+	V4L2_CTRL_TYPE_BITMASK       = 8,
 };
 
 /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
@@ -1144,14 +1156,19 @@ enum v4l2_colorfx {
 #define V4L2_CID_ILLUMINATORS_1			(V4L2_CID_BASE+37)
 #define V4L2_CID_ILLUMINATORS_2			(V4L2_CID_BASE+38)
 
+#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE	(V4L2_CID_BASE+39)
+#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT		(V4L2_CID_BASE+40)
+
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+39)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+41)
+
+/* Minimum number of buffer neede by the device */
 
 /*  MPEG-class control IDs defined by V4L2 */
 #define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
 #define V4L2_CID_MPEG_CLASS 			(V4L2_CTRL_CLASS_MPEG | 1)
 
-/*  MPEG streams */
+/*  MPEG streams, specific to multiplexed streams */
 #define V4L2_CID_MPEG_STREAM_TYPE 		(V4L2_CID_MPEG_BASE+0)
 enum v4l2_mpeg_stream_type {
 	V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
@@ -1173,7 +1190,7 @@ enum v4l2_mpeg_stream_vbi_fmt {
 	V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
 };
 
-/*  MPEG audio */
+/*  MPEG audio controls specific to multiplexed streams  */
 #define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ 	(V4L2_CID_MPEG_BASE+100)
 enum v4l2_mpeg_audio_sampling_freq {
 	V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
@@ -1289,7 +1306,7 @@ enum v4l2_mpeg_audio_ac3_bitrate {
 	V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
 };
 
-/*  MPEG video */
+/*  MPEG video controls specific to multiplexed streams */
 #define V4L2_CID_MPEG_VIDEO_ENCODING 		(V4L2_CID_MPEG_BASE+200)
 enum v4l2_mpeg_video_encoding {
 	V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
@@ -1317,6 +1334,141 @@ enum v4l2_mpeg_video_bitrate_mode {
 #define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
 #define V4L2_CID_MPEG_VIDEO_MUTE 		(V4L2_CID_MPEG_BASE+210)
 #define V4L2_CID_MPEG_VIDEO_MUTE_YUV 		(V4L2_CID_MPEG_BASE+211)
+#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE		(V4L2_CID_MPEG_BASE+212)
+#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER	(V4L2_CID_MPEG_BASE+213)
+#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB		(V4L2_CID_MPEG_BASE+214)
+#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE			(V4L2_CID_MPEG_BASE+215)
+#define V4L2_CID_MPEG_VIDEO_HEADER_MODE				(V4L2_CID_MPEG_BASE+216)
+enum v4l2_mpeg_video_header_mode {
+	V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE			= 0,
+	V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME	= 1,
+
+};
+#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC			(V4L2_CID_MPEG_BASE+217)
+#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE		(V4L2_CID_MPEG_BASE+218)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES	(V4L2_CID_MPEG_BASE+219)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB		(V4L2_CID_MPEG_BASE+220)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE		(V4L2_CID_MPEG_BASE+221)
+enum v4l2_mpeg_video_multi_slice_mode {
+	V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE		= 0,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB		= 1,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
+#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
+#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
+#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP		(V4L2_CID_MPEG_BASE+302)
+#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP			(V4L2_CID_MPEG_BASE+303)
+#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP			(V4L2_CID_MPEG_BASE+304)
+#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP		(V4L2_CID_MPEG_BASE+350)
+#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP		(V4L2_CID_MPEG_BASE+351)
+#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP		(V4L2_CID_MPEG_BASE+352)
+#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP			(V4L2_CID_MPEG_BASE+353)
+#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP			(V4L2_CID_MPEG_BASE+354)
+#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM		(V4L2_CID_MPEG_BASE+355)
+#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE		(V4L2_CID_MPEG_BASE+356)
+#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE		(V4L2_CID_MPEG_BASE+357)
+enum v4l2_mpeg_video_h264_entropy_mode {
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC	= 0,
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD		(V4L2_CID_MPEG_BASE+358)
+#define V4L2_CID_MPEG_VIDEO_H264_LEVEL			(V4L2_CID_MPEG_BASE+359)
+enum v4l2_mpeg_video_h264_level {
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_0	= 0,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1B	= 1,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_1	= 2,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_2	= 3,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_3	= 4,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_0	= 5,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_1	= 6,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_2	= 7,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_0	= 8,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_1	= 9,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_2	= 10,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_0	= 11,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_1	= 12,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE	(V4L2_CID_MPEG_BASE+362)
+enum v4l2_mpeg_video_h264_loop_filter_mode {
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED				= 0,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED				= 1,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_PROFILE		(V4L2_CID_MPEG_BASE+363)
+enum v4l2_mpeg_video_h264_profile {
+	V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE			= 0,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE	= 1,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MAIN			= 2,
+	V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED			= 3,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH			= 4,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10			= 5,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422			= 6,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE	= 7,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA		= 8,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA		= 9,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA		= 10,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA		= 11,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE		= 12,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH		= 13,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
+	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE		(V4L2_CID_MPEG_BASE+366)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC		(V4L2_CID_MPEG_BASE+367)
+enum v4l2_mpeg_video_h264_vui_sar_idc {
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED	= 0,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1		= 1,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11		= 2,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11		= 3,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11		= 4,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33		= 5,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11		= 6,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11		= 7,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11		= 8,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33		= 9,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11		= 10,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11		= 11,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33		= 12,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99		= 13,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3		= 14,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2		= 15,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP	(V4L2_CID_MPEG_BASE+403)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP	(V4L2_CID_MPEG_BASE+404)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL		(V4L2_CID_MPEG_BASE+405)
+enum v4l2_mpeg_video_mpeg4_level {
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0	= 0,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B	= 1,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_1	= 2,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_2	= 3,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3	= 4,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B	= 5,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_4	= 6,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_5	= 7,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE	(V4L2_CID_MPEG_BASE+406)
+enum v4l2_mpeg_video_mpeg4_profile {
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE				= 0,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE			= 1,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE				= 2,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE			= 3,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY	= 4,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL		(V4L2_CID_MPEG_BASE+407)
 
 /*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
 #define V4L2_CID_MPEG_CX2341X_BASE 				(V4L2_CTRL_CLASS_MPEG | 0x1000)
@@ -1359,6 +1511,33 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type {
 #define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+10)
 #define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS 	(V4L2_CID_MPEG_CX2341X_BASE+11)
 
+/*  MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
+#define V4L2_CID_MPEG_MFC51_BASE				(V4L2_CTRL_CLASS_MPEG | 0x1100)
+
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY		(V4L2_CID_MPEG_MFC51_BASE+0)
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE	(V4L2_CID_MPEG_MFC51_BASE+1)
+#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE			(V4L2_CID_MPEG_MFC51_BASE+2)
+enum v4l2_mpeg_mfc51_video_frame_skip_mode {
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT	= 1,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT		= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE			(V4L2_CID_MPEG_MFC51_BASE+3)
+enum v4l2_mpeg_mfc51_video_force_frame_type {
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME		= 1,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED	= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING				(V4L2_CID_MPEG_MFC51_BASE+4)
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV				(V4L2_CID_MPEG_MFC51_BASE+5)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT			(V4L2_CID_MPEG_MFC51_BASE+6)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF			(V4L2_CID_MPEG_MFC51_BASE+7)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY		(V4L2_CID_MPEG_MFC51_BASE+50)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK			(V4L2_CID_MPEG_MFC51_BASE+51)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH		(V4L2_CID_MPEG_MFC51_BASE+52)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC		(V4L2_CID_MPEG_MFC51_BASE+53)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P		(V4L2_CID_MPEG_MFC51_BASE+54)
+
 /*  Camera class control IDs */
 #define V4L2_CID_CAMERA_CLASS_BASE 	(V4L2_CTRL_CLASS_CAMERA | 0x900)
 #define V4L2_CID_CAMERA_CLASS 		(V4L2_CTRL_CLASS_CAMERA | 1)
@@ -1427,6 +1606,41 @@ enum v4l2_preemphasis {
 #define V4L2_CID_TUNE_POWER_LEVEL		(V4L2_CID_FM_TX_CLASS_BASE + 113)
 #define V4L2_CID_TUNE_ANTENNA_CAPACITOR		(V4L2_CID_FM_TX_CLASS_BASE + 114)
 
+/* Flash and privacy (indicator) light controls */
+#define V4L2_CID_FLASH_CLASS_BASE		(V4L2_CTRL_CLASS_FLASH | 0x900)
+#define V4L2_CID_FLASH_CLASS			(V4L2_CTRL_CLASS_FLASH | 1)
+
+#define V4L2_CID_FLASH_LED_MODE			(V4L2_CID_FLASH_CLASS_BASE + 1)
+enum v4l2_flash_led_mode {
+	V4L2_FLASH_LED_MODE_NONE,
+	V4L2_FLASH_LED_MODE_FLASH,
+	V4L2_FLASH_LED_MODE_TORCH,
+};
+
+#define V4L2_CID_FLASH_STROBE_SOURCE		(V4L2_CID_FLASH_CLASS_BASE + 2)
+enum v4l2_flash_strobe_source {
+	V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
+	V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
+};
+
+#define V4L2_CID_FLASH_STROBE			(V4L2_CID_FLASH_CLASS_BASE + 3)
+#define V4L2_CID_FLASH_STROBE_STOP		(V4L2_CID_FLASH_CLASS_BASE + 4)
+#define V4L2_CID_FLASH_STROBE_STATUS		(V4L2_CID_FLASH_CLASS_BASE + 5)
+
+#define V4L2_CID_FLASH_TIMEOUT			(V4L2_CID_FLASH_CLASS_BASE + 6)
+#define V4L2_CID_FLASH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 7)
+#define V4L2_CID_FLASH_TORCH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 8)
+#define V4L2_CID_FLASH_INDICATOR_INTENSITY	(V4L2_CID_FLASH_CLASS_BASE + 9)
+
+#define V4L2_CID_FLASH_FAULT			(V4L2_CID_FLASH_CLASS_BASE + 10)
+#define V4L2_FLASH_FAULT_OVER_VOLTAGE		(1 << 0)
+#define V4L2_FLASH_FAULT_TIMEOUT		(1 << 1)
+#define V4L2_FLASH_FAULT_OVER_TEMPERATURE	(1 << 2)
+#define V4L2_FLASH_FAULT_SHORT_CIRCUIT		(1 << 3)
+
+#define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
+#define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
+
 /*
  *	T U N I N G
  */
@@ -1791,6 +2005,7 @@ struct v4l2_streamparm {
 #define V4L2_EVENT_ALL				0
 #define V4L2_EVENT_VSYNC			1
 #define V4L2_EVENT_EOS				2
+#define V4L2_EVENT_CTRL				3
 #define V4L2_EVENT_PRIVATE_START		0x08000000
 
 /* Payload for V4L2_EVENT_VSYNC */
@@ -1799,21 +2014,46 @@ struct v4l2_event_vsync {
 	__u8 field;
 } __attribute__ ((packed));
 
+/* Payload for V4L2_EVENT_CTRL */
+#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
+#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
+
+struct v4l2_event_ctrl {
+	__u32 changes;
+	__u32 type;
+	union {
+		__s32 value;
+		__s64 value64;
+	};
+	__u32 flags;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 step;
+	__s32 default_value;
+};
+
 struct v4l2_event {
 	__u32				type;
 	union {
 		struct v4l2_event_vsync vsync;
+		struct v4l2_event_ctrl	ctrl;
 		__u8			data[64];
 	} u;
 	__u32				pending;
 	__u32				sequence;
 	struct timespec			timestamp;
-	__u32				reserved[9];
+	__u32				id;
+	__u32				reserved[8];
 };
 
+#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
+#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
+
 struct v4l2_event_subscription {
 	__u32				type;
-	__u32				reserved[7];
+	__u32				id;
+	__u32				flags;
+	__u32				reserved[5];
 };
 
 /*
diff --git a/include/media/adp1653.h b/include/media/adp1653.h
new file mode 100644
index 00000000000..50a1af88aed
--- /dev/null
+++ b/include/media/adp1653.h
@@ -0,0 +1,126 @@
+/*
+ * include/media/adp1653.h
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *	Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *	Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ADP1653_H
+#define ADP1653_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#define ADP1653_NAME				"adp1653"
+#define ADP1653_I2C_ADDR			(0x60 >> 1)
+
+/* Register definitions */
+#define ADP1653_REG_OUT_SEL			0x00
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN	0x01
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX	0x0b
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN	0x0c
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX	0x1f
+#define ADP1653_REG_OUT_SEL_HPLED_SHIFT		3
+#define ADP1653_REG_OUT_SEL_ILED_MAX		0x07
+#define ADP1653_REG_OUT_SEL_ILED_SHIFT		0
+
+#define ADP1653_REG_CONFIG			0x01
+#define ADP1653_REG_CONFIG_TMR_CFG		(1 << 4)
+#define ADP1653_REG_CONFIG_TMR_SET_MAX		0x0f
+#define ADP1653_REG_CONFIG_TMR_SET_SHIFT	0
+
+#define ADP1653_REG_SW_STROBE			0x02
+#define ADP1653_REG_SW_STROBE_SW_STROBE		(1 << 0)
+
+#define ADP1653_REG_FAULT			0x03
+#define ADP1653_REG_FAULT_FLT_SCP		(1 << 3)
+#define ADP1653_REG_FAULT_FLT_OT		(1 << 2)
+#define ADP1653_REG_FAULT_FLT_TMR		(1 << 1)
+#define ADP1653_REG_FAULT_FLT_OV		(1 << 0)
+
+#define ADP1653_INDICATOR_INTENSITY_MIN		0
+#define ADP1653_INDICATOR_INTENSITY_STEP	2500
+#define ADP1653_INDICATOR_INTENSITY_MAX		\
+	(ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \
+	((a) / ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \
+	((a) * ADP1653_INDICATOR_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_BASE		35
+#define ADP1653_FLASH_INTENSITY_STEP		15
+#define ADP1653_FLASH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_FLASH_INTENSITY_MAX			\
+	(ADP1653_FLASH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a)				\
+	((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 :			\
+	 (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP))
+#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a)		\
+	((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE)
+
+#define ADP1653_TORCH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_TORCH_INTENSITY_MAX			\
+	(ADP1653_TORCH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+struct adp1653_platform_data {
+	int (*power)(struct v4l2_subdev *sd, int on);
+
+	u32 max_flash_timeout;		/* flash light timeout in us */
+	u32 max_flash_intensity;	/* led intensity, flash mode */
+	u32 max_torch_intensity;	/* led intensity, torch mode */
+	u32 max_indicator_intensity;	/* indicator led intensity */
+};
+
+#define to_adp1653_flash(sd)	container_of(sd, struct adp1653_flash, subdev)
+
+struct adp1653_flash {
+	struct v4l2_subdev subdev;
+	struct adp1653_platform_data *platform_data;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *led_mode;
+	struct v4l2_ctrl *flash_timeout;
+	struct v4l2_ctrl *flash_intensity;
+	struct v4l2_ctrl *torch_intensity;
+	struct v4l2_ctrl *indicator_intensity;
+
+	struct mutex power_lock;
+	int power_count;
+	int fault;
+};
+
+#endif /* ADP1653_H */
diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
new file mode 100644
index 00000000000..26cece59512
--- /dev/null
+++ b/include/media/atmel-isi.h
@@ -0,0 +1,119 @@
+/*
+ * Register definitions for the Atmel Image Sensor Interface.
+ *
+ * Copyright (C) 2011 Atmel Corporation
+ * Josh Wu, <josh.wu@atmel.com>
+ *
+ * Based on previous work by Lars Haring, <lars.haring@atmel.com>
+ * and Sedji Gaouaou
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ATMEL_ISI_H__
+#define __ATMEL_ISI_H__
+
+#include <linux/types.h>
+
+/* ISI_V2 register offsets */
+#define ISI_CFG1				0x0000
+#define ISI_CFG2				0x0004
+#define ISI_PSIZE				0x0008
+#define ISI_PDECF				0x000c
+#define ISI_Y2R_SET0				0x0010
+#define ISI_Y2R_SET1				0x0014
+#define ISI_R2Y_SET0				0x0018
+#define ISI_R2Y_SET1				0x001C
+#define ISI_R2Y_SET2				0x0020
+#define ISI_CTRL				0x0024
+#define ISI_STATUS				0x0028
+#define ISI_INTEN				0x002C
+#define ISI_INTDIS				0x0030
+#define ISI_INTMASK				0x0034
+#define ISI_DMA_CHER				0x0038
+#define ISI_DMA_CHDR				0x003C
+#define ISI_DMA_CHSR				0x0040
+#define ISI_DMA_P_ADDR				0x0044
+#define ISI_DMA_P_CTRL				0x0048
+#define ISI_DMA_P_DSCR				0x004C
+#define ISI_DMA_C_ADDR				0x0050
+#define ISI_DMA_C_CTRL				0x0054
+#define ISI_DMA_C_DSCR				0x0058
+
+/* Bitfields in CFG1 */
+#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW		(1 << 2)
+#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW		(1 << 3)
+#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING	(1 << 4)
+#define ISI_CFG1_EMB_SYNC			(1 << 6)
+#define ISI_CFG1_CRC_SYNC			(1 << 7)
+/* Constants for FRATE(ISI_V2) */
+#define		ISI_CFG1_FRATE_CAPTURE_ALL	(0 << 8)
+#define		ISI_CFG1_FRATE_DIV_2		(1 << 8)
+#define		ISI_CFG1_FRATE_DIV_3		(2 << 8)
+#define		ISI_CFG1_FRATE_DIV_4		(3 << 8)
+#define		ISI_CFG1_FRATE_DIV_5		(4 << 8)
+#define		ISI_CFG1_FRATE_DIV_6		(5 << 8)
+#define		ISI_CFG1_FRATE_DIV_7		(6 << 8)
+#define		ISI_CFG1_FRATE_DIV_8		(7 << 8)
+#define ISI_CFG1_DISCR				(1 << 11)
+#define ISI_CFG1_FULL_MODE			(1 << 12)
+
+/* Bitfields in CFG2 */
+#define ISI_CFG2_GRAYSCALE			(1 << 13)
+/* Constants for YCC_SWAP(ISI_V2) */
+#define		ISI_CFG2_YCC_SWAP_DEFAULT	(0 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_1	(1 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_2	(2 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_3	(3 << 28)
+#define ISI_CFG2_IM_VSIZE_OFFSET		0
+#define ISI_CFG2_IM_HSIZE_OFFSET		16
+#define ISI_CFG2_IM_VSIZE_MASK		(0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
+#define ISI_CFG2_IM_HSIZE_MASK		(0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
+
+/* Bitfields in CTRL */
+/* Also using in SR(ISI_V2) */
+#define ISI_CTRL_EN				(1 << 0)
+#define ISI_CTRL_CDC				(1 << 8)
+/* Also using in SR/IER/IDR/IMR(ISI_V2) */
+#define ISI_CTRL_DIS				(1 << 1)
+#define ISI_CTRL_SRST				(1 << 2)
+
+/* Bitfields in SR */
+#define ISI_SR_SIP				(1 << 19)
+/* Also using in SR/IER/IDR/IMR */
+#define ISI_SR_VSYNC				(1 << 10)
+#define ISI_SR_PXFR_DONE			(1 << 16)
+#define ISI_SR_CXFR_DONE			(1 << 17)
+#define ISI_SR_P_OVR				(1 << 24)
+#define ISI_SR_C_OVR				(1 << 25)
+#define ISI_SR_CRC_ERR				(1 << 26)
+#define ISI_SR_FR_OVR				(1 << 27)
+
+/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */
+#define ISI_DMA_CTRL_FETCH			(1 << 0)
+#define ISI_DMA_CTRL_WB				(1 << 1)
+#define ISI_DMA_CTRL_IEN			(1 << 2)
+#define ISI_DMA_CTRL_DONE			(1 << 3)
+
+/* Bitfields in DMA_CHSR/CHER/CHDR */
+#define ISI_DMA_CHSR_P_CH			(1 << 0)
+#define ISI_DMA_CHSR_C_CH			(1 << 1)
+
+/* Definition for isi_platform_data */
+#define ISI_DATAWIDTH_8				0x01
+#define ISI_DATAWIDTH_10			0x02
+
+struct isi_platform_data {
+	u8 has_emb_sync;
+	u8 emb_crc_sync;
+	u8 hsync_act_low;
+	u8 vsync_act_low;
+	u8 pclk_act_falling;
+	u8 isi_full_mode;
+	u32 data_width_flags;
+	/* Using for ISI_CFG1 */
+	u32 frate;
+};
+
+#endif /* __ATMEL_ISI_H__ */
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
new file mode 100644
index 00000000000..8b11fb03798
--- /dev/null
+++ b/include/media/davinci/vpbe.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_H
+#define _VPBE_H
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_types.h>
+
+/* OSD configuration info */
+struct osd_config_info {
+	char module_name[32];
+};
+
+struct vpbe_output {
+	struct v4l2_output output;
+	/*
+	 * If output capabilities include dv_preset, list supported presets
+	 * below
+	 */
+	char *subdev_name;
+	/*
+	 * defualt_mode identifies the default timings set at the venc or
+	 * external encoder.
+	 */
+	char *default_mode;
+	/*
+	 * Fields below are used for supporting multiple modes. For example,
+	 * LCD panel might support different modes and they are listed here.
+	 * Similarly for supporting external encoders, lcd controller port
+	 * requires a set of non-standard timing values to be listed here for
+	 * each supported mode since venc is used in non-standard timing mode
+	 * for interfacing with external encoder similar to configuring lcd
+	 * panel timings
+	 */
+	unsigned int num_modes;
+	struct vpbe_enc_mode_info *modes;
+	/*
+	 * Bus configuration goes here for external encoders. Some encoders
+	 * may require multiple interface types for each of the output. For
+	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
+	 * Not sure if this is needed on a per mode basis instead of per
+	 * output basis. If per mode is needed, we may have to move this to
+	 * mode_info structure
+	 */
+};
+
+/* encoder configuration info */
+struct encoder_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/* structure for defining vpbe display subsystem components */
+struct vpbe_config {
+	char module_name[32];
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	struct osd_config_info osd;
+	struct encoder_config_info venc;
+	/* external encoder information goes here */
+	int num_ext_encoders;
+	struct encoder_config_info *ext_encoders;
+	int num_outputs;
+	/* Order is venc outputs followed by LCD and then external encoders */
+	struct vpbe_output *outputs;
+};
+
+struct vpbe_device;
+
+struct vpbe_device_ops {
+	/* crop cap for the display */
+	int (*g_cropcap)(struct vpbe_device *vpbe_dev,
+			 struct v4l2_cropcap *cropcap);
+
+	/* Enumerate the outputs */
+	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
+			    struct v4l2_output *output);
+
+	/* Set output to the given index */
+	int (*set_output)(struct vpbe_device *vpbe_dev,
+			 int index);
+
+	/* Get current output */
+	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
+
+	/* Set DV preset at current output */
+	int (*s_dv_preset)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_preset *dv_preset);
+
+	/* Get DV presets supported at the output */
+	int (*g_dv_preset)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_preset *dv_preset);
+
+	/* Enumerate the DV Presets supported at the output */
+	int (*enum_dv_presets)(struct vpbe_device *vpbe_dev,
+			       struct v4l2_dv_enum_preset *preset_info);
+
+	/* Set std at the output */
+	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* Get the current std at the output */
+	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* initialize the device */
+	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* De-initialize the device */
+	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* Get the current mode info */
+	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
+			     struct vpbe_enc_mode_info*);
+
+	/*
+	 * Set the current mode in the encoder. Alternate way of setting
+	 * standard or DV preset or custom timings in the encoder
+	 */
+	int (*set_mode)(struct vpbe_device *vpbe_dev,
+			struct vpbe_enc_mode_info*);
+	/* Power management operations */
+	int (*suspend)(struct vpbe_device *vpbe_dev);
+	int (*resume)(struct vpbe_device *vpbe_dev);
+};
+
+/* struct for vpbe device */
+struct vpbe_device {
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* vpbe dispay controller cfg */
+	struct vpbe_config *cfg;
+	/* parent device */
+	struct device *pdev;
+	/* external encoder v4l2 sub devices */
+	struct v4l2_subdev **encoders;
+	/* current encoder index */
+	int current_sd_index;
+	struct mutex lock;
+	/* device initialized */
+	int initialized;
+	/* vpbe dac clock */
+	struct clk *dac_clk;
+	/* osd_device pointer */
+	struct osd_state *osd_device;
+	/*
+	 * fields below are accessed by users of vpbe_device. Not the
+	 * ones above
+	 */
+
+	/* current output */
+	int current_out_index;
+	/* lock used by caller to do atomic operation on vpbe device */
+	/* current timings set in the controller */
+	struct vpbe_enc_mode_info current_timings;
+	/* venc sub device */
+	struct v4l2_subdev *venc;
+	/* device operations below */
+	struct vpbe_device_ops ops;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
new file mode 100644
index 00000000000..dbf6b37682c
--- /dev/null
+++ b/include/media/davinci/vpbe_display.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef VPBE_DISPLAY_H
+#define VPBE_DISPLAY_H
+
+/* Header files */
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe.h>
+
+#define VPBE_DISPLAY_MAX_DEVICES 2
+
+enum vpbe_display_device_id {
+	VPBE_DISPLAY_DEVICE_0,
+	VPBE_DISPLAY_DEVICE_1
+};
+
+#define VPBE_DISPLAY_DRV_NAME	"vpbe-display"
+
+#define VPBE_DISPLAY_MAJOR_RELEASE              1
+#define VPBE_DISPLAY_MINOR_RELEASE              0
+#define VPBE_DISPLAY_BUILD                      1
+#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \
+	(VPBE_DISPLAY_MINOR_RELEASE << 8)  | \
+	VPBE_DISPLAY_BUILD)
+
+#define VPBE_DISPLAY_VALID_FIELD(field)   ((V4L2_FIELD_NONE == field) || \
+	 (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field))
+
+/* Exp ratio numerator and denominator constants */
+#define VPBE_DISPLAY_H_EXP_RATIO_N	9
+#define VPBE_DISPLAY_H_EXP_RATIO_D	8
+#define VPBE_DISPLAY_V_EXP_RATIO_N	6
+#define VPBE_DISPLAY_V_EXP_RATIO_D	5
+
+/* Zoom multiplication factor */
+#define VPBE_DISPLAY_ZOOM_4X	4
+#define VPBE_DISPLAY_ZOOM_2X	2
+
+/* Structures */
+struct display_layer_info {
+	int enable;
+	/* Layer ID used by Display Manager */
+	enum osd_layer id;
+	struct osd_layer_config config;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	enum osd_h_exp_ratio h_exp;
+	enum osd_v_exp_ratio v_exp;
+};
+
+/* vpbe display object structure */
+struct vpbe_layer {
+	/* number of buffers in fbuffers */
+	unsigned int numbuffers;
+	/* Pointer to the vpbe_display */
+	struct vpbe_display *disp_dev;
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/* videobuf specific parameters
+	 * Buffer queue used in video-buf
+	 */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* V4l2 specific parameters */
+	/* Identifies video device for this layer */
+	struct video_device video_dev;
+	/* This field keeps track of type of buffer exchange mechanism user
+	 * has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* Used to store pixel format */
+	struct v4l2_pix_format pix_fmt;
+	enum v4l2_field buf_field;
+	/* Video layer configuration params */
+	struct display_layer_info layer_info;
+	/* vpbe specific parameters
+	 * enable window for display
+	 */
+	unsigned char window_enable;
+	/* number of open instances of the layer */
+	unsigned int usrs;
+	/* number of users performing IO */
+	unsigned int io_usrs;
+	/* Indicates id of the field which is being displayed */
+	unsigned int field_id;
+	/* Indicates whether streaming started */
+	unsigned char started;
+	/* Identifies device object */
+	enum vpbe_display_device_id device_id;
+	/* facilitation of ioctl ops lock by v4l2*/
+	struct mutex opslock;
+	u8 layer_first_int;
+};
+
+/* vpbe device structure */
+struct vpbe_display {
+	/* layer specific parameters */
+	/* lock for isr updates to buf layers*/
+	spinlock_t dma_queue_lock;
+	/* C-Plane offset from start of y-plane */
+	unsigned int cbcr_ofst;
+	struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES];
+	struct vpbe_device *vpbe_dev;
+	struct osd_state *osd_device;
+};
+
+/* File handle structure */
+struct vpbe_fh {
+	/* vpbe device structure */
+	struct vpbe_display *disp_dev;
+	/* pointer to layer object for opened device */
+	struct vpbe_layer *layer;
+	/* Indicates whether this file handle is doing IO */
+	unsigned char io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+struct buf_config_params {
+	unsigned char min_numbuffers;
+	unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+};
+
+#endif	/* VPBE_DISPLAY_H */
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
new file mode 100644
index 00000000000..d7e397a444e
--- /dev/null
+++ b/include/media/davinci/vpbe_osd.h
@@ -0,0 +1,394 @@
+/*
+ * Copyright (C) 2007-2009 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef _OSD_H
+#define _OSD_H
+
+#include <media/davinci/vpbe_types.h>
+
+#define VPBE_OSD_SUBDEV_NAME "vpbe-osd"
+
+/**
+ * enum osd_layer
+ * @WIN_OSD0: On-Screen Display Window 0
+ * @WIN_VID0: Video Window 0
+ * @WIN_OSD1: On-Screen Display Window 1
+ * @WIN_VID1: Video Window 1
+ *
+ * Description:
+ * An enumeration of the osd display layers.
+ */
+enum osd_layer {
+	WIN_OSD0,
+	WIN_VID0,
+	WIN_OSD1,
+	WIN_VID1,
+};
+
+/**
+ * enum osd_win_layer
+ * @OSDWIN_OSD0: On-Screen Display Window 0
+ * @OSDWIN_OSD1: On-Screen Display Window 1
+ *
+ * Description:
+ * An enumeration of the OSD Window layers.
+ */
+enum osd_win_layer {
+	OSDWIN_OSD0,
+	OSDWIN_OSD1,
+};
+
+/**
+ * enum osd_pix_format
+ * @PIXFMT_1BPP: 1-bit-per-pixel bitmap
+ * @PIXFMT_2BPP: 2-bits-per-pixel bitmap
+ * @PIXFMT_4BPP: 4-bits-per-pixel bitmap
+ * @PIXFMT_8BPP: 8-bits-per-pixel bitmap
+ * @PIXFMT_RGB565: 16-bits-per-pixel RGB565
+ * @PIXFMT_YCbCrI: YUV 4:2:2
+ * @PIXFMT_RGB888: 24-bits-per-pixel RGB888
+ * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap
+ * @PIXFMT_NV12: YUV 4:2:0 planar
+ * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp)
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel formats.
+ */
+enum osd_pix_format {
+	PIXFMT_1BPP = 0,
+	PIXFMT_2BPP,
+	PIXFMT_4BPP,
+	PIXFMT_8BPP,
+	PIXFMT_RGB565,
+	PIXFMT_YCbCrI,
+	PIXFMT_RGB888,
+	PIXFMT_YCrCbI,
+	PIXFMT_NV12,
+	PIXFMT_OSD_ATTR,
+};
+
+/**
+ * enum osd_h_exp_ratio
+ * @H_EXP_OFF: no expansion (1/1)
+ * @H_EXP_9_OVER_8: 9/8 expansion ratio
+ * @H_EXP_3_OVER_2: 3/2 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available horizontal expansion ratios.
+ */
+enum osd_h_exp_ratio {
+	H_EXP_OFF,
+	H_EXP_9_OVER_8,
+	H_EXP_3_OVER_2,
+};
+
+/**
+ * enum osd_v_exp_ratio
+ * @V_EXP_OFF: no expansion (1/1)
+ * @V_EXP_6_OVER_5: 6/5 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available vertical expansion ratios.
+ */
+enum osd_v_exp_ratio {
+	V_EXP_OFF,
+	V_EXP_6_OVER_5,
+};
+
+/**
+ * enum osd_zoom_factor
+ * @ZOOM_X1: no zoom (x1)
+ * @ZOOM_X2: x2 zoom
+ * @ZOOM_X4: x4 zoom
+ *
+ * Description:
+ * An enumeration of the available zoom factors.
+ */
+enum osd_zoom_factor {
+	ZOOM_X1,
+	ZOOM_X2,
+	ZOOM_X4,
+};
+
+/**
+ * enum osd_clut
+ * @ROM_CLUT: ROM CLUT
+ * @RAM_CLUT: RAM CLUT
+ *
+ * Description:
+ * An enumeration of the available Color Lookup Tables (CLUTs).
+ */
+enum osd_clut {
+	ROM_CLUT,
+	RAM_CLUT,
+};
+
+/**
+ * enum osd_rom_clut
+ * @ROM_CLUT0: Macintosh CLUT
+ * @ROM_CLUT1: CLUT from DM270 and prior devices
+ *
+ * Description:
+ * An enumeration of the ROM Color Lookup Table (CLUT) options.
+ */
+enum osd_rom_clut {
+	ROM_CLUT0,
+	ROM_CLUT1,
+};
+
+/**
+ * enum osd_blending_factor
+ * @OSD_0_VID_8: OSD pixels are fully transparent
+ * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8
+ * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8
+ * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8
+ * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8
+ * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8
+ * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8
+ * @OSD_8_VID_0: OSD pixels are fully opaque
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blending factor options.
+ */
+enum osd_blending_factor {
+	OSD_0_VID_8,
+	OSD_1_VID_7,
+	OSD_2_VID_6,
+	OSD_3_VID_5,
+	OSD_4_VID_4,
+	OSD_5_VID_3,
+	OSD_6_VID_2,
+	OSD_8_VID_0,
+};
+
+/**
+ * enum osd_blink_interval
+ * @BLINK_X1: blink interval is 1 vertical refresh cycle
+ * @BLINK_X2: blink interval is 2 vertical refresh cycles
+ * @BLINK_X3: blink interval is 3 vertical refresh cycles
+ * @BLINK_X4: blink interval is 4 vertical refresh cycles
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blinking interval options.
+ */
+enum osd_blink_interval {
+	BLINK_X1,
+	BLINK_X2,
+	BLINK_X3,
+	BLINK_X4,
+};
+
+/**
+ * enum osd_cursor_h_width
+ * @H_WIDTH_1: horizontal line width is 1 pixel
+ * @H_WIDTH_4: horizontal line width is 4 pixels
+ * @H_WIDTH_8: horizontal line width is 8 pixels
+ * @H_WIDTH_12: horizontal line width is 12 pixels
+ * @H_WIDTH_16: horizontal line width is 16 pixels
+ * @H_WIDTH_20: horizontal line width is 20 pixels
+ * @H_WIDTH_24: horizontal line width is 24 pixels
+ * @H_WIDTH_28: horizontal line width is 28 pixels
+ */
+enum osd_cursor_h_width {
+	H_WIDTH_1,
+	H_WIDTH_4,
+	H_WIDTH_8,
+	H_WIDTH_12,
+	H_WIDTH_16,
+	H_WIDTH_20,
+	H_WIDTH_24,
+	H_WIDTH_28,
+};
+
+/**
+ * enum davinci_cursor_v_width
+ * @V_WIDTH_1: vertical line width is 1 line
+ * @V_WIDTH_2: vertical line width is 2 lines
+ * @V_WIDTH_4: vertical line width is 4 lines
+ * @V_WIDTH_6: vertical line width is 6 lines
+ * @V_WIDTH_8: vertical line width is 8 lines
+ * @V_WIDTH_10: vertical line width is 10 lines
+ * @V_WIDTH_12: vertical line width is 12 lines
+ * @V_WIDTH_14: vertical line width is 14 lines
+ */
+enum osd_cursor_v_width {
+	V_WIDTH_1,
+	V_WIDTH_2,
+	V_WIDTH_4,
+	V_WIDTH_6,
+	V_WIDTH_8,
+	V_WIDTH_10,
+	V_WIDTH_12,
+	V_WIDTH_14,
+};
+
+/**
+ * struct osd_cursor_config
+ * @xsize: horizontal size in pixels
+ * @ysize: vertical size in lines
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ * @h_width: horizontal line width
+ * @v_width: vertical line width
+ * @clut: the CLUT selector (ROM or RAM) for the cursor color
+ * @clut_index: an index into the CLUT for the cursor color
+ *
+ * Description:
+ * A structure describing the configuration parameters of the hardware
+ * rectangular cursor.
+ */
+struct osd_cursor_config {
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+	enum osd_cursor_h_width h_width;
+	enum osd_cursor_v_width v_width;
+	enum osd_clut clut;
+	unsigned char clut_index;
+};
+
+/**
+ * struct osd_layer_config
+ * @pixfmt: pixel format
+ * @line_length: offset in bytes between start of each line in memory
+ * @xsize: number of horizontal pixels displayed per line
+ * @ysize: number of lines displayed
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ *
+ * Description:
+ * A structure describing the configuration parameters of an On-Screen Display
+ * (OSD) or video layer related to how the image is stored in memory.
+ * @line_length must be a multiple of the cache line size (32 bytes).
+ */
+struct osd_layer_config {
+	enum osd_pix_format pixfmt;
+	unsigned line_length;
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+};
+
+/* parameters that apply on a per-window (OSD or video) basis */
+struct osd_window_state {
+	int is_allocated;
+	int is_enabled;
+	unsigned long fb_base_phys;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	struct osd_layer_config lconfig;
+};
+
+/* parameters that apply on a per-OSD-window basis */
+struct osd_osdwin_state {
+	enum osd_clut clut;
+	enum osd_blending_factor blend;
+	int colorkey_blending;
+	unsigned colorkey;
+	int rec601_attenuation;
+	/* index is pixel value */
+	unsigned char palette_map[16];
+};
+
+/* hardware rectangular cursor parameters */
+struct osd_cursor_state {
+	int is_enabled;
+	struct osd_cursor_config config;
+};
+
+struct osd_state;
+
+struct vpbe_osd_ops {
+	int (*initialize)(struct osd_state *sd);
+	int (*request_layer)(struct osd_state *sd, enum osd_layer layer);
+	void (*release_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*enable_layer)(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin);
+	void (*disable_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig);
+	void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig);
+	void (*start_layer)(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst);
+	void (*set_left_margin)(struct osd_state *sd, u32 val);
+	void (*set_top_margin)(struct osd_state *sd, u32 val);
+	void (*set_interpolation_filter)(struct osd_state *sd, int filter);
+	int (*set_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio h_exp,
+					enum osd_v_exp_ratio v_exp);
+	void (*get_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio *h_exp,
+					enum osd_v_exp_ratio *v_exp);
+	void (*set_zoom)(struct osd_state *sd, enum osd_layer layer,
+				enum osd_zoom_factor h_zoom,
+				enum osd_zoom_factor v_zoom);
+};
+
+struct osd_state {
+	enum vpbe_version vpbe_type;
+	spinlock_t lock;
+	struct device *dev;
+	dma_addr_t osd_base_phys;
+	unsigned long osd_base;
+	unsigned long osd_size;
+	/* 1-->the isr will toggle the VID0 ping-pong buffer */
+	int pingpong;
+	int interpolation_filter;
+	int field_inversion;
+	enum osd_h_exp_ratio osd_h_exp;
+	enum osd_v_exp_ratio osd_v_exp;
+	enum osd_h_exp_ratio vid_h_exp;
+	enum osd_v_exp_ratio vid_v_exp;
+	enum osd_clut backg_clut;
+	unsigned backg_clut_index;
+	enum osd_rom_clut rom_clut;
+	int is_blinking;
+	/* attribute window blinking enabled */
+	enum osd_blink_interval blink;
+	/* YCbCrI or YCrCbI */
+	enum osd_pix_format yc_pixfmt;
+	/* columns are Y, Cb, Cr */
+	unsigned char clut_ram[256][3];
+	struct osd_cursor_state cursor;
+	/* OSD0, VID0, OSD1, VID1 */
+	struct osd_window_state win[4];
+	/* OSD0, OSD1 */
+	struct osd_osdwin_state osdwin[2];
+	/* OSD device Operations */
+	struct vpbe_osd_ops ops;
+};
+
+struct osd_platform_data {
+	enum vpbe_version vpbe_type;
+	int  field_inv_wa_enable;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
new file mode 100644
index 00000000000..727f55170e4
--- /dev/null
+++ b/include/media/davinci/vpbe_types.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_TYPES_H
+#define _VPBE_TYPES_H
+
+enum vpbe_version {
+	VPBE_VERSION_1 = 1,
+	VPBE_VERSION_2,
+	VPBE_VERSION_3,
+};
+
+/* vpbe_timing_type - Timing types used in vpbe device */
+enum vpbe_enc_timings_type {
+	VPBE_ENC_STD = 0x1,
+	VPBE_ENC_DV_PRESET = 0x2,
+	VPBE_ENC_CUSTOM_TIMINGS = 0x4,
+	/* Used when set timings through FB device interface */
+	VPBE_ENC_TIMINGS_INVALID = 0x8,
+};
+
+union vpbe_timings {
+	v4l2_std_id std_id;
+	unsigned int dv_preset;
+};
+
+/*
+ * struct vpbe_enc_mode_info
+ * @name: ptr to name string of the standard, "NTSC", "PAL" etc
+ * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
+ * @interlaced: 1 - interlaced, 0 - non interlaced/progressive
+ * @xres: x or horizontal resolution of the display
+ * @yres: y or vertical resolution of the display
+ * @fps: frame per second
+ * @left_margin: left margin of the display
+ * @right_margin: right margin of the display
+ * @upper_margin: upper margin of the display
+ * @lower_margin: lower margin of the display
+ * @hsync_len: h-sync length
+ * @vsync_len: v-sync length
+ * @flags: bit field: bit usage is documented below
+ *
+ * Description:
+ *  Structure holding timing and resolution information of a standard.
+ * Used by vpbe_device to set required non-standard timing in the
+ * venc when lcd controller output is connected to a external encoder.
+ * A table of timings is maintained in vpbe device to set this in
+ * venc when external encoder is connected to lcd controller output.
+ * Encoder may provide a g_dv_timings() API to override these values
+ * as needed.
+ *
+ *  Notes
+ *  ------
+ *  if_type should be used only by encoder manager and encoder.
+ *  flags usage
+ *     b0 (LSB) - hsync polarity, 0 - negative, 1 - positive
+ *     b1       - vsync polarity, 0 - negative, 1 - positive
+ *     b2       - field id polarity, 0 - negative, 1  - positive
+ */
+struct vpbe_enc_mode_info {
+	unsigned char *name;
+	enum vpbe_enc_timings_type timings_type;
+	union vpbe_timings timings;
+	unsigned int interlaced;
+	unsigned int xres;
+	unsigned int yres;
+	struct v4l2_fract aspect;
+	struct v4l2_fract fps;
+	unsigned int left_margin;
+	unsigned int right_margin;
+	unsigned int upper_margin;
+	unsigned int lower_margin;
+	unsigned int hsync_len;
+	unsigned int vsync_len;
+	unsigned int flags;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
new file mode 100644
index 00000000000..426c205831a
--- /dev/null
+++ b/include/media/davinci/vpbe_venc.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_H
+#define _VPBE_VENC_H
+
+#include <media/v4l2-subdev.h>
+#include <media/davinci/vpbe_types.h>
+
+#define VPBE_VENC_SUBDEV_NAME "vpbe-venc"
+
+/* venc events */
+#define VENC_END_OF_FRAME	BIT(0)
+#define VENC_FIRST_FIELD	BIT(1)
+#define VENC_SECOND_FIELD	BIT(2)
+
+struct venc_platform_data {
+	enum vpbe_version venc_type;
+	int (*setup_clock)(enum vpbe_enc_timings_type type,
+			   unsigned int mode);
+	/* Number of LCD outputs supported */
+	int num_lcd_outputs;
+};
+
+enum venc_ioctls {
+	VENC_GET_FLD = 1,
+};
+
+/* exported functions */
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name);
+#endif
diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
new file mode 100644
index 00000000000..7611963a257
--- /dev/null
+++ b/include/media/mmp-camera.h
@@ -0,0 +1,9 @@
+/*
+ * Information for the Marvell Armada MMP camera
+ */
+
+struct mmp_camera_platform_data {
+	struct platform_device *i2c_device;
+	int sensor_power_gpio;
+	int sensor_reset_gpio;
+};
diff --git a/drivers/media/video/ov7670.h b/include/media/ov7670.h
index b133bc12303..b133bc12303 100644
--- a/drivers/media/video/ov7670.h
+++ b/include/media/ov7670.h
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 60536c74c1e..b1f19b77ecd 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -117,7 +117,7 @@ struct rc_dev {
 	int				(*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
 	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
 	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
-	int				(*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+	int				(*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n);
 	void				(*s_idle)(struct rc_dev *dev, bool enable);
 	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
 	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 4e1409ec261..17c9759ae77 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -18,12 +18,13 @@
 #define RC_TYPE_JVC	(1  << 3)	/* JVC protocol */
 #define RC_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
 #define RC_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
+#define RC_TYPE_MCE_KBD	(1  << 29)	/* RC6-ish MCE keyboard/mouse */
 #define RC_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
 #define RC_TYPE_OTHER	(1u << 31)
 
 #define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC  | RC_TYPE_RC6  | \
 		     RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
-		     RC_TYPE_RC5_SZ | RC_TYPE_OTHER)
+		     RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER)
 
 struct rc_map_table {
 	u32	scancode;
diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h
index 80346a6d28a..48413b410f1 100644
--- a/include/media/sh_mobile_ceu.h
+++ b/include/media/sh_mobile_ceu.h
@@ -7,10 +7,18 @@
 #define SH_CEU_FLAG_VSYNC_LOW		(1 << 3) /* default High if possible */
 
 struct device;
+struct resource;
+
+struct sh_mobile_ceu_companion {
+	u32		num_resources;
+	struct resource	*resource;
+	int		id;
+	void		*platform_data;
+};
 
 struct sh_mobile_ceu_info {
 	unsigned long flags;
-	struct device *csi2_dev;
+	struct sh_mobile_ceu_companion *csi2;
 };
 
 #endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h
index 4d261517446..c586c4f7f16 100644
--- a/include/media/sh_mobile_csi2.h
+++ b/include/media/sh_mobile_csi2.h
@@ -11,6 +11,8 @@
 #ifndef SH_MIPI_CSI
 #define SH_MIPI_CSI
 
+#include <linux/list.h>
+
 enum sh_csi2_phy {
 	SH_CSI2_PHY_MAIN,
 	SH_CSI2_PHY_SUB,
@@ -33,14 +35,14 @@ struct sh_csi2_client_config {
 	struct platform_device *pdev;	/* client platform device */
 };
 
+struct v4l2_device;
+
 struct sh_csi2_pdata {
 	enum sh_csi2_type type;
 	unsigned int flags;
 	struct sh_csi2_client_config *clients;
 	int num_clients;
+	struct v4l2_device *v4l2_dev;
 };
 
-struct device;
-struct v4l2_device;
-
 #endif
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 238bd334fd8..7582952dcea 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -20,14 +20,15 @@
 #include <media/videobuf2-core.h>
 #include <media/v4l2-device.h>
 
-extern struct bus_type soc_camera_bus_type;
-
 struct file;
+struct soc_camera_link;
 
 struct soc_camera_device {
-	struct list_head list;
-	struct device dev;
+	struct list_head list;		/* list of all registered devices */
+	struct soc_camera_link *link;
 	struct device *pdev;		/* Platform device */
+	struct device *parent;		/* Camera host device */
+	struct device *control;		/* E.g., the i2c client */
 	s32 user_width;
 	s32 user_height;
 	u32 bytesperline;		/* for padding, zero if unused */
@@ -66,8 +67,6 @@ struct soc_camera_host_ops {
 	struct module *owner;
 	int (*add)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
-	int (*suspend)(struct soc_camera_device *, pm_message_t);
-	int (*resume)(struct soc_camera_device *);
 	/*
 	 * .get_formats() is called for each client device format, but
 	 * .put_formats() is only called once. Further, if any of the calls to
@@ -109,12 +108,6 @@ struct soc_camera_host_ops {
 #define SOCAM_SENSOR_INVERT_HSYNC	(1 << 2)
 #define SOCAM_SENSOR_INVERT_VSYNC	(1 << 3)
 #define SOCAM_SENSOR_INVERT_DATA	(1 << 4)
-#define SOCAM_MIPI_1LANE		(1 << 5)
-#define SOCAM_MIPI_2LANE		(1 << 6)
-#define SOCAM_MIPI_3LANE		(1 << 7)
-#define SOCAM_MIPI_4LANE		(1 << 8)
-#define SOCAM_MIPI	(SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
-			SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
 
 struct i2c_board_info;
 struct regulator_bulk_data;
@@ -134,11 +127,11 @@ struct soc_camera_link {
 	int num_regulators;
 
 	/*
-	 * For non-I2C devices platform platform has to provide methods to
-	 * add a device to the system and to remove
+	 * For non-I2C devices platform has to provide methods to add a device
+	 * to the system and to remove it
 	 */
-	int (*add_device)(struct soc_camera_link *, struct device *);
-	void (*del_device)(struct soc_camera_link *);
+	int (*add_device)(struct soc_camera_device *);
+	void (*del_device)(struct soc_camera_device *);
 	/* Optional callbacks to power on or off and reset the sensor */
 	int (*power)(struct device *, int);
 	int (*reset)(struct device *);
@@ -152,12 +145,6 @@ struct soc_camera_link {
 	void (*free_bus)(struct soc_camera_link *);
 };
 
-static inline struct soc_camera_device *to_soc_camera_dev(
-	const struct device *dev)
-{
-	return container_of(dev, struct soc_camera_device, dev);
-}
-
 static inline struct soc_camera_host *to_soc_camera_host(
 	const struct device *dev)
 {
@@ -169,13 +156,13 @@ static inline struct soc_camera_host *to_soc_camera_host(
 static inline struct soc_camera_link *to_soc_camera_link(
 	const struct soc_camera_device *icd)
 {
-	return icd->dev.platform_data;
+	return icd->link;
 }
 
 static inline struct device *to_soc_camera_control(
 	const struct soc_camera_device *icd)
 {
-	return dev_get_drvdata(&icd->dev);
+	return icd->control;
 }
 
 static inline struct v4l2_subdev *soc_camera_to_subdev(
@@ -207,11 +194,8 @@ struct soc_camera_format_xlate {
 };
 
 struct soc_camera_ops {
-	int (*suspend)(struct soc_camera_device *, pm_message_t state);
-	int (*resume)(struct soc_camera_device *);
 	unsigned long (*query_bus_param)(struct soc_camera_device *);
 	int (*set_bus_param)(struct soc_camera_device *, unsigned long);
-	int (*enum_input)(struct soc_camera_device *, struct v4l2_input *);
 	const struct v4l2_queryctrl *controls;
 	int num_controls;
 };
@@ -270,6 +254,12 @@ static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
 #define SOCAM_PCLK_SAMPLE_FALLING	(1 << 13)
 #define SOCAM_DATA_ACTIVE_HIGH		(1 << 14)
 #define SOCAM_DATA_ACTIVE_LOW		(1 << 15)
+#define SOCAM_MIPI_1LANE		(1 << 16)
+#define SOCAM_MIPI_2LANE		(1 << 17)
+#define SOCAM_MIPI_3LANE		(1 << 18)
+#define SOCAM_MIPI_4LANE		(1 << 19)
+#define SOCAM_MIPI	(SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
+			SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
 
 #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \
 			      SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
index 6d7a4fd00fc..74f0fa15ca4 100644
--- a/include/media/soc_camera_platform.h
+++ b/include/media/soc_camera_platform.h
@@ -21,7 +21,7 @@ struct soc_camera_platform_info {
 	unsigned long format_depth;
 	struct v4l2_mbus_framefmt format;
 	unsigned long bus_param;
-	struct device *dev;
+	struct soc_camera_device *icd;
 	int (*set_capture)(struct soc_camera_platform_info *info, int enable);
 };
 
@@ -30,8 +30,7 @@ static inline void soc_camera_platform_release(struct platform_device **pdev)
 	*pdev = NULL;
 }
 
-static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
-					  struct device *dev,
+static inline int soc_camera_platform_add(struct soc_camera_device *icd,
 					  struct platform_device **pdev,
 					  struct soc_camera_link *plink,
 					  void (*release)(struct device *dev),
@@ -40,7 +39,7 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
 	struct soc_camera_platform_info *info = plink->priv;
 	int ret;
 
-	if (icl != plink)
+	if (icd->link != plink)
 		return -ENODEV;
 
 	if (*pdev)
@@ -50,7 +49,7 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
 	if (!*pdev)
 		return -ENOMEM;
 
-	info->dev = dev;
+	info->icd = icd;
 
 	(*pdev)->dev.platform_data = info;
 	(*pdev)->dev.release = release;
@@ -59,17 +58,17 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
 	if (ret < 0) {
 		platform_device_put(*pdev);
 		*pdev = NULL;
-		info->dev = NULL;
+		info->icd = NULL;
 	}
 
 	return ret;
 }
 
-static inline void soc_camera_platform_del(const struct soc_camera_link *icl,
+static inline void soc_camera_platform_del(const struct soc_camera_device *icd,
 					   struct platform_device *pdev,
 					   const struct soc_camera_link *plink)
 {
-	if (icl != plink || !pdev)
+	if (icd->link != plink || !pdev)
 		return;
 
 	platform_device_unregister(pdev);
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
index a59a84854dc..a40a6a348d2 100644
--- a/include/media/timb_radio.h
+++ b/include/media/timb_radio.h
@@ -23,13 +23,8 @@
 
 struct timb_radio_platform_data {
 	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
-	struct {
-		struct i2c_board_info *info;
-	} tuner;
-	struct {
-		const char *module_name;
-		struct i2c_board_info *info;
-	} dsp;
+	struct i2c_board_info *tuner;
+	struct i2c_board_info *dsp;
 };
 
 #endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 963e3347183..89c290b69a5 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -127,6 +127,8 @@
 #define TUNER_PHILIPS_FMD1216MEX_MK3	78
 #define TUNER_PHILIPS_FM1216MK5		79
 #define TUNER_PHILIPS_FQ1216LME_MK3	80	/* Active loopthrough, no FM */
+#define TUNER_XC4000			81	/* Xceive Silicon Tuner */
+
 #define TUNER_PARTSNIC_PTI_5NF05	81
 #define TUNER_PHILIPS_CU1216L           82
 #define TUNER_NXP_TDA18271		83
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index b3edb67a831..63fd9d3db29 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -76,6 +76,7 @@ enum {
 	V4L2_IDENT_OV6650 = 258,
 	V4L2_IDENT_OV2640 = 259,
 	V4L2_IDENT_OV9740 = 260,
+	V4L2_IDENT_OV5642 = 261,
 
 	/* module saa7146: reserved range 300-309 */
 	V4L2_IDENT_SAA7146 = 300,
@@ -185,8 +186,9 @@ enum {
 	/* module wm8775: just ident 8775 */
 	V4L2_IDENT_WM8775 = 8775,
 
-	/* module cafe_ccic, just ident 8801 */
+	/* Marvell controllers starting at 8801 */
 	V4L2_IDENT_CAFE = 8801,
+	V4L2_IDENT_ARMADA610 = 8802,
 
 	/* AKM AK8813/AK8814 */
 	V4L2_IDENT_AK8813 = 8813,
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 97d063837b6..13fe4d744ab 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -27,9 +27,12 @@
 
 /* forward references */
 struct v4l2_ctrl_handler;
+struct v4l2_ctrl_helper;
 struct v4l2_ctrl;
 struct video_device;
 struct v4l2_subdev;
+struct v4l2_subscribed_event;
+struct v4l2_fh;
 
 /** struct v4l2_ctrl_ops - The control operations that the driver has to provide.
   * @g_volatile_ctrl: Get a new value for this control. Generally only relevant
@@ -51,6 +54,7 @@ struct v4l2_ctrl_ops {
 
 /** struct v4l2_ctrl - The control structure.
   * @node:	The list node.
+  * @ev_subs:	The list of control event subscriptions.
   * @handler:	The handler that owns the control.
   * @cluster:	Point to start of cluster array.
   * @ncontrols:	Number of controls in cluster array.
@@ -65,6 +69,15 @@ struct v4l2_ctrl_ops {
   *		control's current value cannot be cached and needs to be
   *		retrieved through the g_volatile_ctrl op. Drivers can set
   *		this flag.
+  * @is_auto:   If set, then this control selects whether the other cluster
+  *		members are in 'automatic' mode or 'manual' mode. This is
+  *		used for autogain/gain type clusters. Drivers should never
+  *		set this flag directly.
+  * @manual_mode_value: If the is_auto flag is set, then this is the value
+  *		of the auto control that determines if that control is in
+  *		manual mode. So if the value of the auto control equals this
+  *		value, then the whole cluster is in manual mode. Drivers should
+  *		never set this flag directly.
   * @ops:	The control ops.
   * @id:	The control ID.
   * @name:	The control name.
@@ -97,6 +110,7 @@ struct v4l2_ctrl_ops {
 struct v4l2_ctrl {
 	/* Administrative fields */
 	struct list_head node;
+	struct list_head ev_subs;
 	struct v4l2_ctrl_handler *handler;
 	struct v4l2_ctrl **cluster;
 	unsigned ncontrols;
@@ -105,6 +119,8 @@ struct v4l2_ctrl {
 	unsigned int is_new:1;
 	unsigned int is_private:1;
 	unsigned int is_volatile:1;
+	unsigned int is_auto:1;
+	unsigned int manual_mode_value:8;
 
 	const struct v4l2_ctrl_ops *ops;
 	u32 id;
@@ -134,6 +150,7 @@ struct v4l2_ctrl {
   * @node:	List node for the sorted list.
   * @next:	Single-link list node for the hash.
   * @ctrl:	The actual control information.
+  * @helper:	Pointer to helper struct. Used internally in prepare_ext_ctrls().
   *
   * Each control handler has a list of these refs. The list_head is used to
   * keep a sorted-by-control-ID list of all controls, while the next pointer
@@ -143,6 +160,7 @@ struct v4l2_ctrl_ref {
 	struct list_head node;
 	struct v4l2_ctrl_ref *next;
 	struct v4l2_ctrl *ctrl;
+	struct v4l2_ctrl_helper *helper;
 };
 
 /** struct v4l2_ctrl_handler - The control handler keeps track of all the
@@ -363,6 +381,40 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
 void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
 
 
+/** v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging to
+  * that cluster and set it up for autofoo/foo-type handling.
+  * @ncontrols:	The number of controls in this cluster.
+  * @controls:	The cluster control array of size @ncontrols. The first control
+  *		must be the 'auto' control (e.g. autogain, autoexposure, etc.)
+  * @manual_val: The value for the first control in the cluster that equals the
+  *		manual setting.
+  * @set_volatile: If true, then all controls except the first auto control will
+  *		have is_volatile set to true. If false, then is_volatile will not
+  *		be touched.
+  *
+  * Use for control groups where one control selects some automatic feature and
+  * the other controls are only active whenever the automatic feature is turned
+  * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs
+  * red and blue balance, etc.
+  *
+  * The behavior of such controls is as follows:
+  *
+  * When the autofoo control is set to automatic, then any manual controls
+  * are set to inactive and any reads will call g_volatile_ctrl (if the control
+  * was marked volatile).
+  *
+  * When the autofoo control is set to manual, then any manual controls will
+  * be marked active, and any reads will just return the current value without
+  * going through g_volatile_ctrl.
+  *
+  * In addition, this function will set the V4L2_CTRL_FLAG_UPDATE flag
+  * on the autofoo control and V4L2_CTRL_FLAG_INACTIVE on the foo control(s)
+  * if autofoo is in auto mode.
+  */
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			u8 manual_val, bool set_volatile);
+
+
 /** v4l2_ctrl_find() - Find a control with the given ID.
   * @hdl:	The control handler.
   * @id:	The control ID to find.
@@ -379,9 +431,9 @@ struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
   * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically.
   * Does nothing if @ctrl == NULL.
   * This will usually be called from within the s_ctrl op.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
   *
-  * This function can be called regardless of whether the control handler
-  * is locked or not.
+  * This function assumes that the control handler is locked.
   */
 void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
 
@@ -391,11 +443,12 @@ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
   *
   * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
   * Does nothing if @ctrl == NULL.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
   * This will usually be called when starting or stopping streaming in the
   * driver.
   *
-  * This function can be called regardless of whether the control handler
-  * is locked or not.
+  * This function assumes that the control handler is not locked and will
+  * take the lock itself.
   */
 void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
 
@@ -440,15 +493,22 @@ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
   */
 int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
 
+/* Internal helper functions that deal with control events. */
+void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl,
+		struct v4l2_subscribed_event *sev);
+void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl,
+		struct v4l2_subscribed_event *sev);
 
 /* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */
 int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc);
 int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm);
 int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
-int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_control *ctrl);
 int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
 int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
-int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_ext_controls *c);
 
 /* Helpers for subdevices. If the associated ctrl_handler == NULL then they
    will all return -EINVAL. */
diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h
index 3b86177c8cd..5f14e8895ce 100644
--- a/include/media/v4l2-event.h
+++ b/include/media/v4l2-event.h
@@ -29,39 +29,95 @@
 #include <linux/videodev2.h>
 #include <linux/wait.h>
 
+/*
+ * Overview:
+ *
+ * Events are subscribed per-filehandle. An event specification consists of a
+ * type and is optionally associated with an object identified through the
+ * 'id' field. So an event is uniquely identified by the (type, id) tuple.
+ *
+ * The v4l2-fh struct has a list of subscribed events. The v4l2_subscribed_event
+ * struct is added to that list, one for every subscribed event.
+ *
+ * Each v4l2_subscribed_event struct ends with an array of v4l2_kevent structs.
+ * This array (ringbuffer, really) is used to store any events raised by the
+ * driver. The v4l2_kevent struct links into the 'available' list of the
+ * v4l2_fh struct so VIDIOC_DQEVENT will know which event to dequeue first.
+ *
+ * Finally, if the event subscription is associated with a particular object
+ * such as a V4L2 control, then that object needs to know about that as well
+ * so that an event can be raised by that object. So the 'node' field can
+ * be used to link the v4l2_subscribed_event struct into a list of that
+ * object.
+ *
+ * So to summarize:
+ *
+ * struct v4l2_fh has two lists: one of the subscribed events, and one of the
+ * pending events.
+ *
+ * struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of
+ * that particular type.
+ *
+ * If struct v4l2_subscribed_event is associated with a specific object, then
+ * that object will have an internal list of struct v4l2_subscribed_event so
+ * it knows who subscribed an event to that object.
+ */
+
 struct v4l2_fh;
+struct v4l2_subscribed_event;
 struct video_device;
 
+/** struct v4l2_kevent - Internal kernel event struct.
+  * @list:	List node for the v4l2_fh->available list.
+  * @sev:	Pointer to parent v4l2_subscribed_event.
+  * @event:	The event itself.
+  */
 struct v4l2_kevent {
 	struct list_head	list;
+	struct v4l2_subscribed_event *sev;
 	struct v4l2_event	event;
 };
 
+/** struct v4l2_subscribed_event - Internal struct representing a subscribed event.
+  * @list:	List node for the v4l2_fh->subscribed list.
+  * @type:	Event type.
+  * @id:	Associated object ID (e.g. control ID). 0 if there isn't any.
+  * @flags:	Copy of v4l2_event_subscription->flags.
+  * @fh:	Filehandle that subscribed to this event.
+  * @node:	List node that hooks into the object's event list (if there is one).
+  * @replace:	Optional callback that can replace event 'old' with event 'new'.
+  * @merge:	Optional callback that can merge event 'old' into event 'new'.
+  * @elems:	The number of elements in the events array.
+  * @first:	The index of the events containing the oldest available event.
+  * @in_use:	The number of queued events.
+  * @events:	An array of @elems events.
+  */
 struct v4l2_subscribed_event {
 	struct list_head	list;
 	u32			type;
+	u32			id;
+	u32			flags;
+	struct v4l2_fh		*fh;
+	struct list_head	node;
+	void			(*replace)(struct v4l2_event *old,
+					   const struct v4l2_event *new);
+	void			(*merge)(const struct v4l2_event *old,
+					 struct v4l2_event *new);
+	unsigned		elems;
+	unsigned		first;
+	unsigned		in_use;
+	struct v4l2_kevent	events[];
 };
 
-struct v4l2_events {
-	wait_queue_head_t	wait;
-	struct list_head	subscribed; /* Subscribed events */
-	struct list_head	free; /* Events ready for use */
-	struct list_head	available; /* Dequeueable event */
-	unsigned int		navailable;
-	unsigned int		nallocated; /* Number of allocated events */
-	u32			sequence;
-};
-
-int v4l2_event_init(struct v4l2_fh *fh);
-int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n);
-void v4l2_event_free(struct v4l2_fh *fh);
 int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 		       int nonblocking);
 void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev);
+void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev);
 int v4l2_event_pending(struct v4l2_fh *fh);
 int v4l2_event_subscribe(struct v4l2_fh *fh,
-			 struct v4l2_event_subscription *sub);
+			 struct v4l2_event_subscription *sub, unsigned elems);
 int v4l2_event_unsubscribe(struct v4l2_fh *fh,
 			   struct v4l2_event_subscription *sub);
+void v4l2_event_unsubscribe_all(struct v4l2_fh *fh);
 
 #endif /* V4L2_EVENT_H */
diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h
index 0206aa55be2..52513c225c1 100644
--- a/include/media/v4l2-fh.h
+++ b/include/media/v4l2-fh.h
@@ -29,13 +29,20 @@
 #include <linux/list.h>
 
 struct video_device;
-struct v4l2_events;
+struct v4l2_ctrl_handler;
 
 struct v4l2_fh {
 	struct list_head	list;
 	struct video_device	*vdev;
-	struct v4l2_events      *events; /* events, pending and subscribed */
+	struct v4l2_ctrl_handler *ctrl_handler;
 	enum v4l2_priority	prio;
+
+	/* Events */
+	wait_queue_head_t	wait;
+	struct list_head	subscribed; /* Subscribed events */
+	struct list_head	available; /* Dequeueable event */
+	unsigned int		navailable;
+	u32			sequence;
 };
 
 /*
@@ -44,7 +51,7 @@ struct v4l2_fh {
  * from driver's v4l2_file_operations->open() handler if the driver
  * uses v4l2_fh.
  */
-int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev);
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev);
 /*
  * Add the fh to the list of file handles on a video_device. The file
  * handle must be initialised first.
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 971c7fa2961..6114007c8c7 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -13,6 +13,69 @@
 
 #include <linux/v4l2-mediabus.h>
 
+/* Parallel flags */
+/*
+ * Can the client run in master or in slave mode. By "Master mode" an operation
+ * mode is meant, when the client (e.g., a camera sensor) is producing
+ * horizontal and vertical synchronisation. In "Slave mode" the host is
+ * providing these signals to the slave.
+ */
+#define V4L2_MBUS_MASTER			(1 << 0)
+#define V4L2_MBUS_SLAVE				(1 << 1)
+/* Which signal polarities it supports */
+/* Note: in BT.656 mode HSYNC and VSYNC are unused */
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH		(1 << 2)
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW		(1 << 3)
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW		(1 << 5)
+#define V4L2_MBUS_PCLK_SAMPLE_RISING		(1 << 6)
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING		(1 << 7)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH		(1 << 8)
+#define V4L2_MBUS_DATA_ACTIVE_LOW		(1 << 9)
+
+/* Serial flags */
+/* How many lanes the client can use */
+#define V4L2_MBUS_CSI2_1_LANE			(1 << 0)
+#define V4L2_MBUS_CSI2_2_LANE			(1 << 1)
+#define V4L2_MBUS_CSI2_3_LANE			(1 << 2)
+#define V4L2_MBUS_CSI2_4_LANE			(1 << 3)
+/* On which channels it can send video data */
+#define V4L2_MBUS_CSI2_CHANNEL_0		(1 << 4)
+#define V4L2_MBUS_CSI2_CHANNEL_1		(1 << 5)
+#define V4L2_MBUS_CSI2_CHANNEL_2		(1 << 6)
+#define V4L2_MBUS_CSI2_CHANNEL_3		(1 << 7)
+/* Does it support only continuous or also non-continuous clock mode */
+#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		(1 << 8)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	(1 << 9)
+
+#define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
+					 V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
+					 V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+
+/**
+ * v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
+ * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
+ *			also be used for BT.1120
+ * @V4L2_MBUS_CSI2:	MIPI CSI-2 serial interface
+ */
+enum v4l2_mbus_type {
+	V4L2_MBUS_PARALLEL,
+	V4L2_MBUS_BT656,
+	V4L2_MBUS_CSI2,
+};
+
+/**
+ * v4l2_mbus_config - media bus configuration
+ * @type:	in: interface type
+ * @flags:	in / out: configuration flags, depending on @type
+ */
+struct v4l2_mbus_config {
+	enum v4l2_mbus_type type;
+	unsigned int flags;
+};
+
 static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
 				const struct v4l2_mbus_framefmt *mbus_fmt)
 {
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 2884e3e69cb..257da1a30f6 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -229,6 +229,12 @@ struct v4l2_subdev_audio_ops {
    s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
 	video input devices.
 
+   g_std_output: get current standard for video OUTPUT devices. This is ignored
+	by video input devices.
+
+   g_tvnorms_output: get v4l2_std_id with all standards supported by video
+	OUTPUT device. This is ignored by video input devices.
+
    s_crystal_freq: sets the frequency of the crystal used to generate the
 	clocks in Hz. An extra flags field allows device specific configuration
 	regarding clock frequency dividers, etc. If not used, then set flags
@@ -243,6 +249,8 @@ struct v4l2_subdev_audio_ops {
    s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to
 	s_std()
 
+   g_dv_preset: get current dv (Digital Video) preset in the sub device.
+
    query_dv_preset: query dv preset in the sub device. This is similar to
 	querystd()
 
@@ -259,12 +267,20 @@ struct v4l2_subdev_audio_ops {
    try_mbus_fmt: try to set a pixel format on a video data source
 
    s_mbus_fmt: set a pixel format on a video data source
+
+   g_mbus_config: get supported mediabus configurations
+
+   s_mbus_config: set a certain mediabus configuration. This operation is added
+	for compatibility with soc-camera drivers and should not be used by new
+	software.
  */
 struct v4l2_subdev_video_ops {
 	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 	int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
 	int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
+	int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
 	int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
 	int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
 	int (*s_stream)(struct v4l2_subdev *sd, int enable);
 	int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
@@ -282,6 +298,8 @@ struct v4l2_subdev_video_ops {
 			struct v4l2_dv_enum_preset *preset);
 	int (*s_dv_preset)(struct v4l2_subdev *sd,
 			struct v4l2_dv_preset *preset);
+	int (*g_dv_preset)(struct v4l2_subdev *sd,
+			struct v4l2_dv_preset *preset);
 	int (*query_dv_preset)(struct v4l2_subdev *sd,
 			struct v4l2_dv_preset *preset);
 	int (*s_dv_timings)(struct v4l2_subdev *sd,
@@ -298,6 +316,10 @@ struct v4l2_subdev_video_ops {
 			    struct v4l2_mbus_framefmt *fmt);
 	int (*s_mbus_fmt)(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *fmt);
+	int (*g_mbus_config)(struct v4l2_subdev *sd,
+			     struct v4l2_mbus_config *cfg);
+	int (*s_mbus_config)(struct v4l2_subdev *sd,
+			     const struct v4l2_mbus_config *cfg);
 };
 
 /*
@@ -513,8 +535,6 @@ struct v4l2_subdev {
 	void *host_priv;
 	/* subdev device node */
 	struct video_device devnode;
-	/* number of events to be allocated on open */
-	unsigned int nevents;
 };
 
 #define media_entity_to_v4l2_subdev(ent) \
diff --git a/include/sound/tea575x-tuner.h b/include/sound/tea575x-tuner.h
index d2ea112fc20..726e94742a5 100644
--- a/include/sound/tea575x-tuner.h
+++ b/include/sound/tea575x-tuner.h
@@ -23,8 +23,8 @@
  */
 
 #include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
-#include <media/v4l2-ioctl.h>
 
 #define TEA575X_FMIF	10700
 
@@ -42,18 +42,20 @@ struct snd_tea575x_ops {
 };
 
 struct snd_tea575x {
-	struct video_device *vd;	/* video device */
+	struct video_device vd;		/* video device */
 	bool tea5759;			/* 5759 chip is present */
 	bool mute;			/* Device is muted? */
 	bool stereo;			/* receiving stereo */
 	bool tuned;			/* tuned to a station */
 	unsigned int val;		/* hw value */
 	unsigned long freq;		/* frequency */
-	unsigned long in_use;		/* set if the device is in use */
+	struct mutex mutex;
 	struct snd_tea575x_ops *ops;
 	void *private_data;
 	u8 card[32];
 	u8 bus_info[32];
+	struct v4l2_ctrl_handler ctrl_handler;
+	int (*ext_init)(struct snd_tea575x *tea);
 };
 
 int snd_tea575x_init(struct snd_tea575x *tea);
diff --git a/kernel/compat.c b/kernel/compat.c
index 616c78197cc..e2435ee9993 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -158,6 +158,7 @@ int put_compat_timespec(const struct timespec *ts, struct compat_timespec __user
 			__put_user(ts->tv_sec, &cts->tv_sec) ||
 			__put_user(ts->tv_nsec, &cts->tv_nsec)) ? -EFAULT : 0;
 }
+EXPORT_SYMBOL_GPL(put_compat_timespec);
 
 static long compat_nanosleep_restart(struct restart_block *restart)
 {
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index 4831800239d..484a35b3715 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -22,11 +22,11 @@
 
 #include <asm/io.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/version.h>
-#include <sound/core.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
 #include <sound/tea575x-tuner.h>
 
 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
@@ -62,17 +62,6 @@ module_param(radio_nr, int, 0);
 #define TEA575X_BIT_DUMMY	(1<<15)		/* buffer */
 #define TEA575X_BIT_FREQ_MASK	0x7fff
 
-static struct v4l2_queryctrl radio_qctrl[] = {
-	{
-		.id            = V4L2_CID_AUDIO_MUTE,
-		.name          = "Mute",
-		.minimum       = 0,
-		.maximum       = 1,
-		.default_value = 1,
-		.type          = V4L2_CTRL_TYPE_BOOLEAN,
-	}
-};
-
 /*
  * lowlevel part
  */
@@ -266,83 +255,23 @@ static int vidioc_s_audio(struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_queryctrl(struct file *file, void *priv,
-					struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
-		if (qc->id && qc->id == radio_qctrl[i].id) {
-			memcpy(qc, &(radio_qctrl[i]),
-						sizeof(*qc));
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static int vidioc_g_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
+static int tea575x_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct snd_tea575x *tea = video_drvdata(file);
+	struct snd_tea575x *tea = container_of(ctrl->handler, struct snd_tea575x, ctrl_handler);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = tea->mute;
+		tea->mute = ctrl->val;
+		snd_tea575x_set_freq(tea);
 		return 0;
 	}
-	return -EINVAL;
-}
 
-static int vidioc_s_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
-{
-	struct snd_tea575x *tea = video_drvdata(file);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		if (tea->mute != ctrl->value) {
-			tea->mute = ctrl->value;
-			snd_tea575x_set_freq(tea);
-		}
-		return 0;
-	}
 	return -EINVAL;
 }
 
-static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	if (i != 0)
-		return -EINVAL;
-	return 0;
-}
-
-static int snd_tea575x_exclusive_open(struct file *file)
-{
-	struct snd_tea575x *tea = video_drvdata(file);
-
-	return test_and_set_bit(0, &tea->in_use) ? -EBUSY : 0;
-}
-
-static int snd_tea575x_exclusive_release(struct file *file)
-{
-	struct snd_tea575x *tea = video_drvdata(file);
-
-	clear_bit(0, &tea->in_use);
-	return 0;
-}
-
 static const struct v4l2_file_operations tea575x_fops = {
 	.owner		= THIS_MODULE,
-	.open           = snd_tea575x_exclusive_open,
-	.release        = snd_tea575x_exclusive_release,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops tea575x_ioctl_ops = {
@@ -351,20 +280,19 @@ static const struct v4l2_ioctl_ops tea575x_ioctl_ops = {
 	.vidioc_s_tuner     = vidioc_s_tuner,
 	.vidioc_g_audio     = vidioc_g_audio,
 	.vidioc_s_audio     = vidioc_s_audio,
-	.vidioc_g_input     = vidioc_g_input,
-	.vidioc_s_input     = vidioc_s_input,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
-	.vidioc_queryctrl   = vidioc_queryctrl,
-	.vidioc_g_ctrl      = vidioc_g_ctrl,
-	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
 static struct video_device tea575x_radio = {
 	.name           = "tea575x-tuner",
 	.fops           = &tea575x_fops,
 	.ioctl_ops 	= &tea575x_ioctl_ops,
-	.release	= video_device_release,
+	.release	= video_device_release_empty,
+};
+
+static const struct v4l2_ctrl_ops tea575x_ctrl_ops = {
+	.s_ctrl = tea575x_s_ctrl,
 };
 
 /*
@@ -373,7 +301,6 @@ static struct video_device tea575x_radio = {
 int snd_tea575x_init(struct snd_tea575x *tea)
 {
 	int retval;
-	struct video_device *tea575x_radio_inst;
 
 	tea->mute = 1;
 
@@ -381,43 +308,49 @@ int snd_tea575x_init(struct snd_tea575x *tea)
 	if (snd_tea575x_read(tea) != 0x55AA)
 		return -ENODEV;
 
-	tea->in_use = 0;
 	tea->val = TEA575X_BIT_BAND_FM | TEA575X_BIT_SEARCH_10_40;
 	tea->freq = 90500 * 16;		/* 90.5Mhz default */
+	snd_tea575x_set_freq(tea);
 
-	tea575x_radio_inst = video_device_alloc();
-	if (tea575x_radio_inst == NULL) {
-		printk(KERN_ERR "tea575x-tuner: not enough memory\n");
-		return -ENOMEM;
-	}
+	tea->vd = tea575x_radio;
+	video_set_drvdata(&tea->vd, tea);
+	mutex_init(&tea->mutex);
+	tea->vd.lock = &tea->mutex;
 
-	memcpy(tea575x_radio_inst, &tea575x_radio, sizeof(tea575x_radio));
+	v4l2_ctrl_handler_init(&tea->ctrl_handler, 1);
+	tea->vd.ctrl_handler = &tea->ctrl_handler;
+	v4l2_ctrl_new_std(&tea->ctrl_handler, &tea575x_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	retval = tea->ctrl_handler.error;
+	if (retval) {
+		printk(KERN_ERR "tea575x-tuner: can't initialize controls\n");
+		v4l2_ctrl_handler_free(&tea->ctrl_handler);
+		return retval;
+	}
 
-	strcpy(tea575x_radio.name, tea->tea5759 ?
-				   "TEA5759 radio" : "TEA5757 radio");
+	if (tea->ext_init) {
+		retval = tea->ext_init(tea);
+		if (retval) {
+			v4l2_ctrl_handler_free(&tea->ctrl_handler);
+			return retval;
+		}
+	}
 
-	video_set_drvdata(tea575x_radio_inst, tea);
+	v4l2_ctrl_handler_setup(&tea->ctrl_handler);
 
-	retval = video_register_device(tea575x_radio_inst,
-				       VFL_TYPE_RADIO, radio_nr);
+	retval = video_register_device(&tea->vd, VFL_TYPE_RADIO, radio_nr);
 	if (retval) {
 		printk(KERN_ERR "tea575x-tuner: can't register video device!\n");
-		kfree(tea575x_radio_inst);
+		v4l2_ctrl_handler_free(&tea->ctrl_handler);
 		return retval;
 	}
 
-	snd_tea575x_set_freq(tea);
-	tea->vd = tea575x_radio_inst;
-
 	return 0;
 }
 
 void snd_tea575x_exit(struct snd_tea575x *tea)
 {
-	if (tea->vd) {
-		video_unregister_device(tea->vd);
-		tea->vd = NULL;
-	}
+	video_unregister_device(&tea->vd);
+	v4l2_ctrl_handler_free(&tea->ctrl_handler);
 }
 
 static int __init alsa_tea575x_module_init(void)
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index e90d103e177..50abf5bf8e0 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -565,8 +565,8 @@ config SND_FM801_TEA575X_BOOL
 
 config SND_TEA575X
 	tristate
-	depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO
-	default SND_FM801 || SND_ES1968
+	depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2
+	default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2
 
 source "sound/pci/hda/Kconfig"