Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
  powerpc/fsl: add device tree binding for QE firmware
  of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree

3 files changed, 61 insertions, 2 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 6e37be1eeb2..4f8930263dd 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -21,6 +21,15 @@ Required properties:
 - fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
   threads.
 
+Optional properties:
+- fsl,firmware-phandle:
+    Usage: required only if there is no fsl,qe-firmware child node
+    Value type: <phandle>
+    Definition: Points to a firmware node (see "QE Firmware Node" below)
+        that contains the firmware that should be uploaded for this QE.
+        The compatible property for the firmware node should say,
+        "fsl,qe-firmware".
+
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
   generators in Hz.
@@ -59,3 +68,48 @@ Example:
 		reg = <0 c000>;
 	};
      };
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties.  The node should be placed
+inside a QE node that needs it.  Doing so eliminates the need for a
+fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: A standard property.  Specify a string that indicates what
+          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
+
+   - fsl,firmware
+      Usage: required
+      Value type: <prop-encoded-array>, encoded as an array of bytes
+      Definition: A standard property.  This property contains the firmware
+          binary "blob".
+
+Example:
+	qe1@e0080000 {
+		compatible = "fsl,qe";
+		qe_firmware:qe-firmware {
+			compatible = "fsl,qe-firmware";
+			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+		};
+		...
+	};
+
+	qe2@e0090000 {
+		compatible = "fsl,qe";
+		fsl,firmware-phandle = <&qe_firmware>;
+		...
+	};
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index 929d017535a..d4f8be307cd 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -481,6 +481,8 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
 	if (rc)
 		goto err_bcom_rx_irq;
 
+	lpbfifo.dma_irqs_enabled = 1;
+
 	/* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
 	lpbfifo.bcom_tx_task =
 		bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 406757a9d7e..dee4fb56b09 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -376,8 +376,11 @@ unsigned long __init unflatten_dt_node(unsigned long mem,
 		if (!np->type)
 			np->type = "<NULL>";
 	}
-	while (tag == OF_DT_BEGIN_NODE) {
-		mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+	while (tag == OF_DT_BEGIN_NODE || tag == OF_DT_NOP) {
+		if (tag == OF_DT_NOP)
+			*p += 4;
+		else
+			mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
 		tag = be32_to_cpup((__be32 *)(*p));
 	}
 	if (tag != OF_DT_END_NODE) {