Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...

63 files changed, 3110 insertions, 1167 deletions

diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 94a20fe8fed..f9a6e2c75f1 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -293,10 +293,23 @@ X!Idrivers/video/console/fonts.c
 
   <chapter id="input_subsystem">
      <title>Input Subsystem</title>
+     <sect1><title>Input core</title>
 !Iinclude/linux/input.h
 !Edrivers/input/input.c
 !Edrivers/input/ff-core.c
 !Edrivers/input/ff-memless.c
+     </sect1>
+     <sect1><title>Polled input devices</title>
+!Iinclude/linux/input-polldev.h
+!Edrivers/input/input-polldev.c
+     </sect1>
+     <sect1><title>Matrix keyboars/keypads</title>
+!Iinclude/linux/input/matrix_keypad.h
+     </sect1>
+     <sect1><title>Sparse keymap support</title>
+!Iinclude/linux/input/sparse-keymap.h
+!Edrivers/input/sparse-keymap.c
+     </sect1>
   </chapter>
 
   <chapter id="spi">
diff --git a/MAINTAINERS b/MAINTAINERS
index f7b0ced8111..107a5a5a017 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -486,13 +486,6 @@ S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
-APPLETOUCH TOUCHPAD DRIVER
-M:	Johannes Berg <johannes@sipsolutions.net>
-L:	linux-input@vger.kernel.org
-S:	Maintained
-F:	Documentation/input/appletouch.txt
-F:	drivers/input/mouse/appletouch.c
-
 ARC FRAMEBUFFER DRIVER
 M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index a57af3e99c7..809114d5a5a 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -866,6 +866,57 @@ static void __init at91_add_device_rtc(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9g45_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_gpio_input(AT91_PIN_PD20, 0);	/* AD0_XR */
+	at91_set_gpio_input(AT91_PIN_PD21, 0);	/* AD1_XL */
+	at91_set_gpio_input(AT91_PIN_PD22, 0);	/* AD2_YT */
+	at91_set_gpio_input(AT91_PIN_PD23, 0);	/* AD3_TB */
+
+	tsadcc_data = *data;
+	platform_device_register(&at91sam9g45_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d345f5453db..53aaa94df75 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -622,6 +622,7 @@ static void __init at91_add_device_tc(void) { }
 
 #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
 static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
 
 static struct resource tsadcc_resources[] = {
 	[0] = {
@@ -642,22 +643,27 @@ static struct platform_device at91sam9rl_tsadcc_device = {
 	.dev		= {
 				.dma_mask		= &tsadcc_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
 	},
 	.resource	= tsadcc_resources,
 	.num_resources	= ARRAY_SIZE(tsadcc_resources),
 };
 
-void __init at91_add_device_tsadcc(void)
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
 {
+	if (!data)
+		return;
+
 	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
 	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
 	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
 	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
 
+	tsadcc_data = *data;
 	platform_device_register(&at91sam9rl_tsadcc_device);
 }
 #else
-void __init at91_add_device_tsadcc(void) {}
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 1cf4d868107..98f9f4bc939 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 300000,
+	.pendet_debounce	= 0x0d,
+	.ts_sample_hold_time	= 0x0a,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -379,6 +389,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(0, NULL, 0);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen */
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index bd28e989e54..7ac20f3a206 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -243,6 +243,16 @@ static struct gpio_led ek_leds[] = {
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 1000000,
+	.pendet_debounce	= 0x0f,
+	.ts_sample_hold_time	= 0x03,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -310,7 +320,7 @@ static void __init ek_board_init(void)
 	/* AC97 */
 	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
-	at91_add_device_tsadcc();
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* Push Buttons */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2295d80dd89..bb6f6a7ba5e 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -187,7 +187,12 @@ extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 extern void __init at91_add_device_isi(void);
 
  /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(void);
+struct at91_tsadcc_data {
+	unsigned int    adc_clock;
+	u8		pendet_debounce;
+	u8		ts_sample_hold_time;
+};
+extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
 
 /* CAN */
 struct at91_can_data {
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
new file mode 100644
index 00000000000..b4e21a2976d
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DAVINCI_KEYSCAN_H
+#define DAVINCI_KEYSCAN_H
+
+#include <linux/io.h>
+
+enum davinci_matrix_types {
+	DAVINCI_KEYSCAN_MATRIX_4X4,
+	DAVINCI_KEYSCAN_MATRIX_5X3,
+};
+
+struct davinci_ks_platform_data {
+	unsigned short	*keymap;
+	u32		keymapsize;
+	u8		rep:1;
+	u8		strobe;
+	u8		interval;
+	u8		matrix_type;
+};
+
+#endif
+
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 950837cf9e9..5619007e7e0 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -46,8 +46,6 @@
 
 extern void ctrl_alt_del(void);
 
-#define to_handle_h(n) container_of(n, struct input_handle, h_node)
-
 /*
  * Exported functions/variables
  */
@@ -132,6 +130,7 @@ int shift_state = 0;
  */
 
 static struct input_handler kbd_handler;
+static DEFINE_SPINLOCK(kbd_event_lock);
 static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];	/* keyboard key bitmap */
 static unsigned char shift_down[NR_SHIFT];		/* shift state counters.. */
 static int dead_key_next;
@@ -190,78 +189,85 @@ EXPORT_SYMBOL_GPL(unregister_keyboard_notifier);
  *  etc.). So this means that scancodes for the extra function keys won't
  *  be valid for the first event device, but will be for the second.
  */
+
+struct getset_keycode_data {
+	unsigned int scancode;
+	unsigned int keycode;
+	int error;
+};
+
+static int getkeycode_helper(struct input_handle *handle, void *data)
+{
+	struct getset_keycode_data *d = data;
+
+	d->error = input_get_keycode(handle->dev, d->scancode, &d->keycode);
+
+	return d->error == 0; /* stop as soon as we successfully get one */
+}
+
 int getkeycode(unsigned int scancode)
 {
-	struct input_handle *handle;
-	int keycode;
-	int error = -ENODEV;
+	struct getset_keycode_data d = { scancode, 0, -ENODEV };
 
-	list_for_each_entry(handle, &kbd_handler.h_list, h_node) {
-		error = input_get_keycode(handle->dev, scancode, &keycode);
-		if (!error)
-			return keycode;
-	}
+	input_handler_for_each_handle(&kbd_handler, &d, getkeycode_helper);
 
-	return error;
+	return d.error ?: d.keycode;
+}
+
+static int setkeycode_helper(struct input_handle *handle, void *data)
+{
+	struct getset_keycode_data *d = data;
+
+	d->error = input_set_keycode(handle->dev, d->scancode, d->keycode);
+
+	return d->error == 0; /* stop as soon as we successfully set one */
 }
 
 int setkeycode(unsigned int scancode, unsigned int keycode)
 {
-	struct input_handle *handle;
-	int error = -ENODEV;
+	struct getset_keycode_data d = { scancode, keycode, -ENODEV };
 
-	list_for_each_entry(handle, &kbd_handler.h_list, h_node) {
-		error = input_set_keycode(handle->dev, scancode, keycode);
-		if (!error)
-			break;
-	}
+	input_handler_for_each_handle(&kbd_handler, &d, setkeycode_helper);
 
-	return error;
+	return d.error;
 }
 
 /*
  * Making beeps and bells.
  */
-static void kd_nosound(unsigned long ignored)
+
+static int kd_sound_helper(struct input_handle *handle, void *data)
 {
-	struct input_handle *handle;
+	unsigned int *hz = data;
+	struct input_dev *dev = handle->dev;
 
-	list_for_each_entry(handle, &kbd_handler.h_list, h_node) {
-		if (test_bit(EV_SND, handle->dev->evbit)) {
-			if (test_bit(SND_TONE, handle->dev->sndbit))
-				input_inject_event(handle, EV_SND, SND_TONE, 0);
-			if (test_bit(SND_BELL, handle->dev->sndbit))
-				input_inject_event(handle, EV_SND, SND_BELL, 0);
-		}
+	if (test_bit(EV_SND, dev->evbit)) {
+		if (test_bit(SND_TONE, dev->sndbit))
+			input_inject_event(handle, EV_SND, SND_TONE, *hz);
+		if (test_bit(SND_BELL, handle->dev->sndbit))
+			input_inject_event(handle, EV_SND, SND_BELL, *hz ? 1 : 0);
 	}
+
+	return 0;
+}
+
+static void kd_nosound(unsigned long ignored)
+{
+	static unsigned int zero;
+
+	input_handler_for_each_handle(&kbd_handler, &zero, kd_sound_helper);
 }
 
 static DEFINE_TIMER(kd_mksound_timer, kd_nosound, 0, 0);
 
 void kd_mksound(unsigned int hz, unsigned int ticks)
 {
-	struct list_head *node;
+	del_timer_sync(&kd_mksound_timer);
 
-	del_timer(&kd_mksound_timer);
+	input_handler_for_each_handle(&kbd_handler, &hz, kd_sound_helper);
 
-	if (hz) {
-		list_for_each_prev(node, &kbd_handler.h_list) {
-			struct input_handle *handle = to_handle_h(node);
-			if (test_bit(EV_SND, handle->dev->evbit)) {
-				if (test_bit(SND_TONE, handle->dev->sndbit)) {
-					input_inject_event(handle, EV_SND, SND_TONE, hz);
-					break;
-				}
-				if (test_bit(SND_BELL, handle->dev->sndbit)) {
-					input_inject_event(handle, EV_SND, SND_BELL, 1);
-					break;
-				}
-			}
-		}
-		if (ticks)
-			mod_timer(&kd_mksound_timer, jiffies + ticks);
-	} else
-		kd_nosound(0);
+	if (hz && ticks)
+		mod_timer(&kd_mksound_timer, jiffies + ticks);
 }
 EXPORT_SYMBOL(kd_mksound);
 
@@ -269,27 +275,34 @@ EXPORT_SYMBOL(kd_mksound);
  * Setting the keyboard rate.
  */
 
-int kbd_rate(struct kbd_repeat *rep)
+static int kbd_rate_helper(struct input_handle *handle, void *data)
 {
-	struct list_head *node;
-	unsigned int d = 0;
-	unsigned int p = 0;
-
-	list_for_each(node, &kbd_handler.h_list) {
-		struct input_handle *handle = to_handle_h(node);
-		struct input_dev *dev = handle->dev;
-
-		if (test_bit(EV_REP, dev->evbit)) {
-			if (rep->delay > 0)
-				input_inject_event(handle, EV_REP, REP_DELAY, rep->delay);
-			if (rep->period > 0)
-				input_inject_event(handle, EV_REP, REP_PERIOD, rep->period);
-			d = dev->rep[REP_DELAY];
-			p = dev->rep[REP_PERIOD];
-		}
+	struct input_dev *dev = handle->dev;
+	struct kbd_repeat *rep = data;
+
+	if (test_bit(EV_REP, dev->evbit)) {
+
+		if (rep[0].delay > 0)
+			input_inject_event(handle,
+					   EV_REP, REP_DELAY, rep[0].delay);
+		if (rep[0].period > 0)
+			input_inject_event(handle,
+					   EV_REP, REP_PERIOD, rep[0].period);
+
+		rep[1].delay = dev->rep[REP_DELAY];
+		rep[1].period = dev->rep[REP_PERIOD];
 	}
-	rep->delay  = d;
-	rep->period = p;
+
+	return 0;
+}
+
+int kbd_rate(struct kbd_repeat *rep)
+{
+	struct kbd_repeat data[2] = { *rep };
+
+	input_handler_for_each_handle(&kbd_handler, data, kbd_rate_helper);
+	*rep = data[1];	/* Copy currently used settings */
+
 	return 0;
 }
 
@@ -997,36 +1010,36 @@ static inline unsigned char getleds(void)
 	return leds;
 }
 
+static int kbd_update_leds_helper(struct input_handle *handle, void *data)
+{
+	unsigned char leds = *(unsigned char *)data;
+
+	if (test_bit(EV_LED, handle->dev->evbit)) {
+		input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
+		input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & 0x02));
+		input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & 0x04));
+		input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
+	}
+
+	return 0;
+}
+
 /*
- * This routine is the bottom half of the keyboard interrupt
- * routine, and runs with all interrupts enabled. It does
- * console changing, led setting and copy_to_cooked, which can
- * take a reasonably long time.
- *
- * Aside from timing (which isn't really that important for
- * keyboard interrupts as they happen often), using the software
- * interrupt routines for this thing allows us to easily mask
- * this when we don't want any of the above to happen.
- * This allows for easy and efficient race-condition prevention
- * for kbd_start => input_inject_event(dev, EV_LED, ...) => ...
+ * This is the tasklet that updates LED state on all keyboards
+ * attached to the box. The reason we use tasklet is that we
+ * need to handle the scenario when keyboard handler is not
+ * registered yet but we already getting updates form VT to
+ * update led state.
  */
-
 static void kbd_bh(unsigned long dummy)
 {
-	struct list_head *node;
 	unsigned char leds = getleds();
 
 	if (leds != ledstate) {
-		list_for_each(node, &kbd_handler.h_list) {
-			struct input_handle *handle = to_handle_h(node);
-			input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
-			input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & 0x02));
-			input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & 0x04));
-			input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
-		}
+		input_handler_for_each_handle(&kbd_handler, &leds,
+					      kbd_update_leds_helper);
+		ledstate = leds;
 	}
-
-	ledstate = leds;
 }
 
 DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
@@ -1136,7 +1149,7 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode, unsigned char u
 static void kbd_rawcode(unsigned char data)
 {
 	struct vc_data *vc = vc_cons[fg_console].d;
-	kbd = kbd_table + fg_console;
+	kbd = kbd_table + vc->vc_num;
 	if (kbd->kbdmode == VC_RAW)
 		put_queue(vc, data);
 }
@@ -1157,7 +1170,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 		tty->driver_data = vc;
 	}
 
-	kbd = kbd_table + fg_console;
+	kbd = kbd_table + vc->vc_num;
 
 	if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
 		sysrq_alt = down ? keycode : 0;
@@ -1296,10 +1309,16 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw)
 static void kbd_event(struct input_handle *handle, unsigned int event_type,
 		      unsigned int event_code, int value)
 {
+	/* We are called with interrupts disabled, just take the lock */
+	spin_lock(&kbd_event_lock);
+
 	if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev))
 		kbd_rawcode(value);
 	if (event_type == EV_KEY)
 		kbd_keycode(event_code, value, HW_RAW(handle->dev));
+
+	spin_unlock(&kbd_event_lock);
+
 	tasklet_schedule(&keyboard_tasklet);
 	do_poke_blanked_console = 1;
 	schedule_console_callback();
@@ -1363,15 +1382,11 @@ static void kbd_disconnect(struct input_handle *handle)
  */
 static void kbd_start(struct input_handle *handle)
 {
-	unsigned char leds = ledstate;
-
 	tasklet_disable(&keyboard_tasklet);
-	if (leds != 0xff) {
-		input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
-		input_inject_event(handle, EV_LED, LED_NUML,    !!(leds & 0x02));
-		input_inject_event(handle, EV_LED, LED_CAPSL,   !!(leds & 0x04));
-		input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
-	}
+
+	if (ledstate != 0xff)
+		kbd_update_leds_helper(handle, &ledstate);
+
 	tasklet_enable(&keyboard_tasklet);
 }
 
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 938100f14b1..3a2ccb09e2f 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -429,7 +429,7 @@ static bool dmi_matches(const struct dmi_system_id *dmi)
 	for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
 		int s = dmi->matches[i].slot;
 		if (s == DMI_NONE)
-			continue;
+			break;
 		if (dmi_ident[s]
 		    && strstr(dmi_ident[s], dmi->matches[i].substr))
 			continue;
@@ -440,6 +440,15 @@ static bool dmi_matches(const struct dmi_system_id *dmi)
 }
 
 /**
+ *	dmi_is_end_of_table - check for end-of-table marker
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)
+{
+	return dmi->matches[0].slot == DMI_NONE;
+}
+
+/**
  *	dmi_check_system - check system DMI data
  *	@list: array of dmi_system_id structures to match against
  *		All non-null elements of the list must match
@@ -457,7 +466,7 @@ int dmi_check_system(const struct dmi_system_id *list)
 	int count = 0;
 	const struct dmi_system_id *d;
 
-	for (d = list; d->ident; d++)
+	for (d = list; !dmi_is_end_of_table(d); d++)
 		if (dmi_matches(d)) {
 			count++;
 			if (d->callback && d->callback(d))
@@ -484,7 +493,7 @@ const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
 {
 	const struct dmi_system_id *d;
 
-	for (d = list; d->ident; d++)
+	for (d = list; !dmi_is_end_of_table(d); d++)
 		if (dmi_matches(d))
 			return d;
 
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index b342926dd7f..f843443ba5c 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -266,7 +266,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
 			 le16_to_cpu(dev->descriptor.idProduct));
 
 	usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
-	strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
+	strlcat(kbd->phys, "/input0", sizeof(kbd->phys));
 
 	input_dev->name = kbd->name;
 	input_dev->phys = kbd->phys;
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index cd50c00ab20..50af91ebd07 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -8,7 +8,7 @@ menu "Input device support"
 config INPUT
 	tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED
 	default y
-	---help---
+	help
 	  Say Y here if you have any input device (mouse, keyboard, tablet,
 	  joystick, steering wheel ...) connected to your system and want
 	  it to be available to applications. This includes standard PS/2
@@ -27,8 +27,7 @@ if INPUT
 
 config INPUT_FF_MEMLESS
 	tristate "Support for memoryless force-feedback devices"
-	default n
-	---help---
+	help
 	  Say Y here if you have memoryless force-feedback input device
 	  such as Logitech WingMan Force 3D, ThrustMaster FireStorm Dual
 	  Power 2, or similar. You will also need to enable hardware-specific
@@ -52,12 +51,25 @@ config INPUT_POLLDEV
 	  To compile this driver as a module, choose M here: the
 	  module will be called input-polldev.
 
+config INPUT_SPARSEKMAP
+	tristate "Sparse keymap support library"
+	help
+	  Say Y here if you are using a driver for an input
+	  device that uses sparse keymap. This option is only
+	  useful for out-of-tree drivers since in-tree drivers
+	  select it automatically.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sparse-keymap.
+
 comment "Userland interfaces"
 
 config INPUT_MOUSEDEV
 	tristate "Mouse interface" if EMBEDDED
 	default y
-	---help---
+	help
 	  Say Y here if you want your mouse to be accessible as char devices
 	  13:32+ - /dev/input/mouseX and 13:63 - /dev/input/mice as an
 	  emulated IntelliMouse Explorer PS/2 mouse. That way, all user space
@@ -73,7 +85,7 @@ config INPUT_MOUSEDEV_PSAUX
 	bool "Provide legacy /dev/psaux device"
 	default y
 	depends on INPUT_MOUSEDEV
-	---help---
+	help
 	  Say Y here if you want your mouse also be accessible as char device
 	  10:1 - /dev/psaux. The data available through /dev/psaux is exactly
 	  the same as the data from /dev/input/mice.
@@ -103,7 +115,7 @@ config INPUT_MOUSEDEV_SCREEN_Y
 
 config INPUT_JOYDEV
 	tristate "Joystick interface"
-	---help---
+	help
 	  Say Y here if you want your joystick or gamepad to be
 	  accessible as char device 13:0+ - /dev/input/jsX device.
 
@@ -125,7 +137,7 @@ config INPUT_EVDEV
 
 config INPUT_EVBUG
 	tristate "Event debugging"
-	---help---
+	help
 	  Say Y here if you have a problem with the input subsystem and
 	  want all events (keypresses, mouse movements), to be output to
 	  the system log. While this is useful for debugging, it's also
@@ -140,7 +152,7 @@ config INPUT_EVBUG
 config INPUT_APMPOWER
 	tristate "Input Power Event -> APM Bridge" if EMBEDDED
 	depends on INPUT && APM_EMULATION
-	---help---
+	help
 	  Say Y here if you want suspend key events to trigger a user
 	  requested suspend through APM. This is useful on embedded
 	  systems where such behaviour is desired without userspace
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 4c9c745a702..7ad212d31f9 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -9,6 +9,7 @@ input-core-objs := input.o input-compat.o ff-core.o
 
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
+obj-$(CONFIG_INPUT_SPARSEKMAP)	+= sparse-keymap.o
 
 obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 38df81fcdc3..b2f07aa1604 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -353,7 +353,7 @@ int input_ff_create(struct input_dev *dev, int max_effects)
 EXPORT_SYMBOL_GPL(input_ff_create);
 
 /**
- * input_ff_free() - frees force feedback portion of input device
+ * input_ff_destroy() - frees force feedback portion of input device
  * @dev: input device supporting force feedback
  *
  * This function is only needed in error path as input core will
@@ -369,6 +369,7 @@ void input_ff_destroy(struct input_dev *dev)
 		if (ff->destroy)
 			ff->destroy(ff);
 		kfree(ff->private);
+		kfree(ff->effects);
 		kfree(ff);
 		dev->ff = NULL;
 	}
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 0d3ce7a50fb..aa6713b4a98 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -56,14 +56,10 @@ static void input_polldev_stop_workqueue(void)
 	mutex_unlock(&polldev_mutex);
 }
 
-static void input_polled_device_work(struct work_struct *work)
+static void input_polldev_queue_work(struct input_polled_dev *dev)
 {
-	struct input_polled_dev *dev =
-		container_of(work, struct input_polled_dev, work.work);
 	unsigned long delay;
 
-	dev->poll(dev);
-
 	delay = msecs_to_jiffies(dev->poll_interval);
 	if (delay >= HZ)
 		delay = round_jiffies_relative(delay);
@@ -71,6 +67,15 @@ static void input_polled_device_work(struct work_struct *work)
 	queue_delayed_work(polldev_wq, &dev->work, delay);
 }
 
+static void input_polled_device_work(struct work_struct *work)
+{
+	struct input_polled_dev *dev =
+		container_of(work, struct input_polled_dev, work.work);
+
+	dev->poll(dev);
+	input_polldev_queue_work(dev);
+}
+
 static int input_open_polled_device(struct input_dev *input)
 {
 	struct input_polled_dev *dev = input_get_drvdata(input);
@@ -80,11 +85,12 @@ static int input_open_polled_device(struct input_dev *input)
 	if (error)
 		return error;
 
-	if (dev->flush)
-		dev->flush(dev);
+	if (dev->open)
+		dev->open(dev);
 
-	queue_delayed_work(polldev_wq, &dev->work,
-			   msecs_to_jiffies(dev->poll_interval));
+	/* Only start polling if polling is enabled */
+	if (dev->poll_interval > 0)
+		queue_delayed_work(polldev_wq, &dev->work, 0);
 
 	return 0;
 }
@@ -95,8 +101,88 @@ static void input_close_polled_device(struct input_dev *input)
 
 	cancel_delayed_work_sync(&dev->work);
 	input_polldev_stop_workqueue();
+
+	if (dev->close)
+		dev->close(dev);
 }
 
+/* SYSFS interface */
+
+static ssize_t input_polldev_get_poll(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct input_polled_dev *polldev = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", polldev->poll_interval);
+}
+
+static ssize_t input_polldev_set_poll(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct input_polled_dev *polldev = dev_get_drvdata(dev);
+	struct input_dev *input = polldev->input;
+	unsigned long interval;
+
+	if (strict_strtoul(buf, 0, &interval))
+		return -EINVAL;
+
+	if (interval < polldev->poll_interval_min)
+		return -EINVAL;
+
+	if (interval > polldev->poll_interval_max)
+		return -EINVAL;
+
+	mutex_lock(&input->mutex);
+
+	polldev->poll_interval = interval;
+
+	if (input->users) {
+		cancel_delayed_work_sync(&polldev->work);
+		if (polldev->poll_interval > 0)
+			input_polldev_queue_work(polldev);
+	}
+
+	mutex_unlock(&input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(poll, S_IRUGO | S_IWUSR, input_polldev_get_poll,
+					    input_polldev_set_poll);
+
+
+static ssize_t input_polldev_get_max(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct input_polled_dev *polldev = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", polldev->poll_interval_max);
+}
+
+static DEVICE_ATTR(max, S_IRUGO, input_polldev_get_max, NULL);
+
+static ssize_t input_polldev_get_min(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct input_polled_dev *polldev = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", polldev->poll_interval_min);
+}
+
+static DEVICE_ATTR(min, S_IRUGO, input_polldev_get_min, NULL);
+
+static struct attribute *sysfs_attrs[] = {
+	&dev_attr_poll.attr,
+	&dev_attr_max.attr,
+	&dev_attr_min.attr,
+	NULL
+};
+
+static struct attribute_group input_polldev_attribute_group = {
+	.attrs = sysfs_attrs
+};
+
 /**
  * input_allocate_polled_device - allocated memory polled device
  *
@@ -126,7 +212,7 @@ EXPORT_SYMBOL(input_allocate_polled_device);
  * @dev: device to free
  *
  * The function frees memory allocated for polling device and drops
- * reference to the associated input device (if present).
+ * reference to the associated input device.
  */
 void input_free_polled_device(struct input_polled_dev *dev)
 {
@@ -150,15 +236,38 @@ EXPORT_SYMBOL(input_free_polled_device);
 int input_register_polled_device(struct input_polled_dev *dev)
 {
 	struct input_dev *input = dev->input;
+	int error;
 
 	input_set_drvdata(input, dev);
 	INIT_DELAYED_WORK(&dev->work, input_polled_device_work);
 	if (!dev->poll_interval)
 		dev->poll_interval = 500;
+	if (!dev->poll_interval_max)
+		dev->poll_interval_max = dev->poll_interval;
 	input->open = input_open_polled_device;
 	input->close = input_close_polled_device;
 
-	return input_register_device(input);
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	error = sysfs_create_group(&input->dev.kobj,
+				   &input_polldev_attribute_group);
+	if (error) {
+		input_unregister_device(input);
+		return error;
+	}
+
+	/*
+	 * Take extra reference to the underlying input device so
+	 * that it survives call to input_unregister_polled_device()
+	 * and is deleted only after input_free_polled_device()
+	 * has been invoked. This is needed to ease task of freeing
+	 * sparse keymaps.
+	 */
+	input_get_device(input);
+
+	return 0;
 }
 EXPORT_SYMBOL(input_register_polled_device);
 
@@ -169,13 +278,13 @@ EXPORT_SYMBOL(input_register_polled_device);
  * The function unregisters previously registered polled input
  * device from input layer. Polling is stopped and device is
  * ready to be freed with call to input_free_polled_device().
- * Callers should not attempt to access dev->input pointer
- * after calling this function.
  */
 void input_unregister_polled_device(struct input_polled_dev *dev)
 {
+	sysfs_remove_group(&dev->input->dev.kobj,
+			   &input_polldev_attribute_group);
+
 	input_unregister_device(dev->input);
-	dev->input = NULL;
 }
 EXPORT_SYMBOL(input_unregister_polled_device);
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 2266ecbfbc0..5c16001959c 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1658,6 +1658,38 @@ void input_unregister_handler(struct input_handler *handler)
 EXPORT_SYMBOL(input_unregister_handler);
 
 /**
+ * input_handler_for_each_handle - handle iterator
+ * @handler: input handler to iterate
+ * @data: data for the callback
+ * @fn: function to be called for each handle
+ *
+ * Iterate over @bus's list of devices, and call @fn for each, passing
+ * it @data and stop when @fn returns a non-zero value. The function is
+ * using RCU to traverse the list and therefore may be usind in atonic
+ * contexts. The @fn callback is invoked from RCU critical section and
+ * thus must not sleep.
+ */
+int input_handler_for_each_handle(struct input_handler *handler, void *data,
+				  int (*fn)(struct input_handle *, void *))
+{
+	struct input_handle *handle;
+	int retval = 0;
+
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(handle, &handler->h_list, h_node) {
+		retval = fn(handle, data);
+		if (retval)
+			break;
+	}
+
+	rcu_read_unlock();
+
+	return retval;
+}
+EXPORT_SYMBOL(input_handler_for_each_handle);
+
+/**
  * input_register_handle - register a new input handle
  * @handle: handle to register
  *
@@ -1690,7 +1722,7 @@ int input_register_handle(struct input_handle *handle)
 	 * we can't be racing with input_unregister_handle()
 	 * and so separate lock is not needed here.
 	 */
-	list_add_tail(&handle->h_node, &handler->h_list);
+	list_add_tail_rcu(&handle->h_node, &handler->h_list);
 
 	if (handler->start)
 		handler->start(handle);
@@ -1713,7 +1745,7 @@ void input_unregister_handle(struct input_handle *handle)
 {
 	struct input_dev *dev = handle->dev;
 
-	list_del_init(&handle->h_node);
+	list_del_rcu(&handle->h_node);
 
 	/*
 	 * Take dev->mutex to prevent race with input_release_device().
@@ -1721,6 +1753,7 @@ void input_unregister_handle(struct input_handle *handle)
 	mutex_lock(&dev->mutex);
 	list_del_rcu(&handle->d_node);
 	mutex_unlock(&dev->mutex);
+
 	synchronize_rcu();
 }
 EXPORT_SYMBOL(input_unregister_handle);
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 79e3edcced1..482cb1204e4 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -125,6 +125,7 @@ static const struct xpad_device {
 	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+	{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
@@ -146,6 +147,7 @@ static const struct xpad_device {
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+	{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
 	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
 };
@@ -212,6 +214,7 @@ static struct usb_device_id xpad_table [] = {
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Rock Band Drums */
+	XPAD_XBOX360_VENDOR(0x0f0d),            /* Hori Controllers */
 	{ }
 };
 
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ee98b1bc5d8..203b88a82b5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -361,6 +361,16 @@ config KEYBOARD_SH_KEYSC
 	  To compile this driver as a module, choose M here: the
 	  module will be called sh_keysc.
 
+config KEYBOARD_DAVINCI
+	tristate "TI DaVinci Key Scan"
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Say Y to enable keypad module support for the TI DaVinci
+	  platforms (DM365).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called davinci_keyscan.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on (ARCH_OMAP1 || ARCH_OMAP2)
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index babad5e58b7..68c017235ce 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
+obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 28e6110d1ff..a3573570c52 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1567,9 +1567,8 @@ static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
 	return 0;
 }
 
-static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
+static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 	{
-		.ident = "Dell Laptop",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
@@ -1578,7 +1577,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_dell_laptop_forced_release_keys,
 	},
 	{
-		.ident = "Dell Laptop",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
 			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
@@ -1587,7 +1585,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_dell_laptop_forced_release_keys,
 	},
 	{
-		.ident = "HP 2133",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
@@ -1596,7 +1593,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_hp_forced_release_keys,
 	},
 	{
-		.ident = "HP Pavilion ZV6100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
@@ -1605,7 +1601,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
-		.ident = "HP Presario R4000",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
@@ -1614,7 +1609,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
-		.ident = "HP Presario R4100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
@@ -1623,7 +1617,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
-		.ident = "HP Presario R4200",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
@@ -1632,7 +1625,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
-		.ident = "Inventec Symphony",
+		/* Inventec Symphony */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
@@ -1641,7 +1634,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
-		.ident = "Samsung NC10",
+		/* Samsung NC10 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
@@ -1650,7 +1643,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
 	{
-		.ident = "Samsung NC20",
+		/* Samsung NC20 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
@@ -1659,7 +1652,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
 	{
-		.ident = "Samsung SQ45S70S",
+		/* Samsung SQ45S70S */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
@@ -1668,7 +1661,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
 	{
-		.ident = "Fujitsu Amilo PA 1510",
+		/* Fujitsu Amilo PA 1510 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
@@ -1677,7 +1670,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_volume_forced_release_keys,
 	},
 	{
-		.ident = "Fujitsu Amilo Pi 3525",
+		/* Fujitsu Amilo Pi 3525 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
@@ -1686,7 +1679,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_amilo_pi3525_forced_release_keys,
 	},
 	{
-		.ident = "Fujitsu Amilo Xi 3650",
+		/* Fujitsu Amilo Xi 3650 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
@@ -1695,7 +1688,6 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkbd_amilo_xi3650_forced_release_keys,
 	},
 	{
-		.ident = "Soltech Corporation TA12",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
@@ -1704,7 +1696,7 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.driver_data = atkdb_soltech_ta12_forced_release_keys,
 	},
 	{
-		.ident = "OQO Model 01+",
+		/* OQO Model 01+ */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
new file mode 100644
index 00000000000..6e52d855f63
--- /dev/null
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -0,0 +1,337 @@
+/*
+ * DaVinci Key Scan Driver for TI platforms
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * Intial Code: Sandeep Paulraj <s-paulraj@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/keyscan.h>
+
+/* Key scan registers */
+#define DAVINCI_KEYSCAN_KEYCTRL		0x0000
+#define DAVINCI_KEYSCAN_INTENA		0x0004
+#define DAVINCI_KEYSCAN_INTFLAG		0x0008
+#define DAVINCI_KEYSCAN_INTCLR		0x000c
+#define DAVINCI_KEYSCAN_STRBWIDTH	0x0010
+#define DAVINCI_KEYSCAN_INTERVAL	0x0014
+#define DAVINCI_KEYSCAN_CONTTIME	0x0018
+#define DAVINCI_KEYSCAN_CURRENTST	0x001c
+#define DAVINCI_KEYSCAN_PREVSTATE	0x0020
+#define DAVINCI_KEYSCAN_EMUCTRL		0x0024
+#define DAVINCI_KEYSCAN_IODFTCTRL	0x002c
+
+/* Key Control Register (KEYCTRL) */
+#define DAVINCI_KEYSCAN_KEYEN		0x00000001
+#define DAVINCI_KEYSCAN_PREVMODE	0x00000002
+#define DAVINCI_KEYSCAN_CHATOFF		0x00000004
+#define DAVINCI_KEYSCAN_AUTODET		0x00000008
+#define DAVINCI_KEYSCAN_SCANMODE	0x00000010
+#define DAVINCI_KEYSCAN_OUTTYPE		0x00000020
+
+/* Masks for the interrupts */
+#define DAVINCI_KEYSCAN_INT_CONT	0x00000008
+#define DAVINCI_KEYSCAN_INT_OFF		0x00000004
+#define DAVINCI_KEYSCAN_INT_ON		0x00000002
+#define DAVINCI_KEYSCAN_INT_CHANGE	0x00000001
+#define DAVINCI_KEYSCAN_INT_ALL		0x0000000f
+
+struct davinci_ks {
+	struct input_dev		*input;
+	struct davinci_ks_platform_data	*pdata;
+	int				irq;
+	void __iomem			*base;
+	resource_size_t			pbase;
+	size_t				base_size;
+	unsigned short			keymap[];
+};
+
+/* Initializing the kp Module */
+static int __init davinci_ks_initialize(struct davinci_ks *davinci_ks)
+{
+	struct device *dev = &davinci_ks->input->dev;
+	struct davinci_ks_platform_data *pdata = davinci_ks->pdata;
+	u32 matrix_ctrl;
+
+	/* Enable all interrupts */
+	__raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+		     davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+	/* Clear interrupts if any */
+	__raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+		     davinci_ks->base + DAVINCI_KEYSCAN_INTCLR);
+
+	/* Setup the scan period = strobe + interval */
+	__raw_writel(pdata->strobe,
+		     davinci_ks->base + DAVINCI_KEYSCAN_STRBWIDTH);
+	__raw_writel(pdata->interval,
+		     davinci_ks->base + DAVINCI_KEYSCAN_INTERVAL);
+	__raw_writel(0x01,
+		     davinci_ks->base + DAVINCI_KEYSCAN_CONTTIME);
+
+	/* Define matrix type */
+	switch (pdata->matrix_type) {
+	case DAVINCI_KEYSCAN_MATRIX_4X4:
+		matrix_ctrl = 0;
+		break;
+	case DAVINCI_KEYSCAN_MATRIX_5X3:
+		matrix_ctrl = (1 << 6);
+		break;
+	default:
+		dev_err(dev->parent, "wrong matrix type\n");
+		return -EINVAL;
+	}
+
+	/* Enable key scan module and set matrix type */
+	__raw_writel(DAVINCI_KEYSCAN_AUTODET | DAVINCI_KEYSCAN_KEYEN |
+		     matrix_ctrl, davinci_ks->base + DAVINCI_KEYSCAN_KEYCTRL);
+
+	return 0;
+}
+
+static irqreturn_t davinci_ks_interrupt(int irq, void *dev_id)
+{
+	struct davinci_ks *davinci_ks = dev_id;
+	struct device *dev = &davinci_ks->input->dev;
+	unsigned short *keymap = davinci_ks->keymap;
+	int keymapsize = davinci_ks->pdata->keymapsize;
+	u32 prev_status, new_status, changed;
+	bool release;
+	int keycode = KEY_UNKNOWN;
+	int i;
+
+	/* Disable interrupt */
+	__raw_writel(0x0, davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+	/* Reading previous and new status of the key scan */
+	prev_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_PREVSTATE);
+	new_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_CURRENTST);
+
+	changed = prev_status ^ new_status;
+
+	if (changed) {
+		/*
+		 * It goes through all bits in 'changed' to ensure
+		 * that no key changes are being missed
+		 */
+		for (i = 0 ; i < keymapsize; i++) {
+			if ((changed>>i) & 0x1) {
+				keycode = keymap[i];
+				release = (new_status >> i) & 0x1;
+				dev_dbg(dev->parent, "key %d %s\n", keycode,
+					release ? "released" : "pressed");
+				input_report_key(davinci_ks->input, keycode,
+						 !release);
+				input_sync(davinci_ks->input);
+			}
+		}
+		/* Clearing interrupt */
+		__raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+			     davinci_ks->base + DAVINCI_KEYSCAN_INTCLR);
+	}
+
+	/* Enable interrupts */
+	__raw_writel(0x1, davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+	return IRQ_HANDLED;
+}
+
+static int __init davinci_ks_probe(struct platform_device *pdev)
+{
+	struct davinci_ks *davinci_ks;
+	struct input_dev *key_dev;
+	struct resource *res, *mem;
+	struct device *dev = &pdev->dev;
+	struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
+	int error, i;
+
+	if (!pdata->keymap) {
+		dev_dbg(dev, "no keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	davinci_ks = kzalloc(sizeof(struct davinci_ks) +
+		sizeof(unsigned short) * pdata->keymapsize, GFP_KERNEL);
+	if (!davinci_ks) {
+		dev_dbg(dev, "could not allocate memory for private data\n");
+		return -ENOMEM;
+	}
+
+	memcpy(davinci_ks->keymap, pdata->keymap,
+		sizeof(unsigned short) * pdata->keymapsize);
+
+	key_dev = input_allocate_device();
+	if (!key_dev) {
+		dev_dbg(dev, "could not allocate input device\n");
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	davinci_ks->input = key_dev;
+
+	davinci_ks->irq = platform_get_irq(pdev, 0);
+	if (davinci_ks->irq < 0) {
+		dev_err(dev, "no key scan irq\n");
+		error = davinci_ks->irq;
+		goto fail2;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no mem resource\n");
+		error = -EINVAL;
+		goto fail2;
+	}
+
+	davinci_ks->pbase = res->start;
+	davinci_ks->base_size = resource_size(res);
+
+	mem = request_mem_region(davinci_ks->pbase, davinci_ks->base_size,
+				 pdev->name);
+	if (!mem) {
+		dev_err(dev, "key scan registers at %08x are not free\n",
+			davinci_ks->pbase);
+		error = -EBUSY;
+		goto fail2;
+	}
+
+	davinci_ks->base = ioremap(davinci_ks->pbase, davinci_ks->base_size);
+	if (!davinci_ks->base) {
+		dev_err(dev, "can't ioremap MEM resource.\n");
+		error = -ENOMEM;
+		goto fail3;
+	}
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, key_dev->evbit);
+
+	/* Setup input device */
+	__set_bit(EV_KEY, key_dev->evbit);
+
+	/* Setup the platform data */
+	davinci_ks->pdata = pdata;
+
+	for (i = 0; i < davinci_ks->pdata->keymapsize; i++)
+		__set_bit(davinci_ks->pdata->keymap[i], key_dev->keybit);
+
+	key_dev->name = "davinci_keyscan";
+	key_dev->phys = "davinci_keyscan/input0";
+	key_dev->dev.parent = &pdev->dev;
+	key_dev->id.bustype = BUS_HOST;
+	key_dev->id.vendor = 0x0001;
+	key_dev->id.product = 0x0001;
+	key_dev->id.version = 0x0001;
+	key_dev->keycode = davinci_ks->keymap;
+	key_dev->keycodesize = sizeof(davinci_ks->keymap[0]);
+	key_dev->keycodemax = davinci_ks->pdata->keymapsize;
+
+	error = input_register_device(davinci_ks->input);
+	if (error < 0) {
+		dev_err(dev, "unable to register davinci key scan device\n");
+		goto fail4;
+	}
+
+	error = request_irq(davinci_ks->irq, davinci_ks_interrupt,
+			  IRQF_DISABLED, pdev->name, davinci_ks);
+	if (error < 0) {
+		dev_err(dev, "unable to register davinci key scan interrupt\n");
+		goto fail5;
+	}
+
+	error = davinci_ks_initialize(davinci_ks);
+	if (error < 0) {
+		dev_err(dev, "unable to initialize davinci key scan device\n");
+		goto fail6;
+	}
+
+	platform_set_drvdata(pdev, davinci_ks);
+	return 0;
+
+fail6:
+	free_irq(davinci_ks->irq, davinci_ks);
+fail5:
+	input_unregister_device(davinci_ks->input);
+	key_dev = NULL;
+fail4:
+	iounmap(davinci_ks->base);
+fail3:
+	release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
+fail2:
+	input_free_device(key_dev);
+fail1:
+	kfree(davinci_ks);
+
+	return error;
+}
+
+static int __devexit davinci_ks_remove(struct platform_device *pdev)
+{
+	struct davinci_ks *davinci_ks = platform_get_drvdata(pdev);
+
+	free_irq(davinci_ks->irq, davinci_ks);
+
+	input_unregister_device(davinci_ks->input);
+
+	iounmap(davinci_ks->base);
+	release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(davinci_ks);
+
+	return 0;
+}
+
+static struct platform_driver davinci_ks_driver = {
+	.driver	= {
+		.name = "davinci_keyscan",
+		.owner = THIS_MODULE,
+	},
+	.remove	= __devexit_p(davinci_ks_remove),
+};
+
+static int __init davinci_ks_init(void)
+{
+	return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe);
+}
+module_init(davinci_ks_init);
+
+static void __exit davinci_ks_exit(void)
+{
+	platform_driver_unregister(&davinci_ks_driver);
+}
+module_exit(davinci_ks_exit);
+
+MODULE_AUTHOR("Miguel Aguilar");
+MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 77d13091425..1aff3b76eff 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -23,8 +23,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
-
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 struct gpio_button_data {
 	struct gpio_keys_button *button;
@@ -38,10 +37,8 @@ struct gpio_keys_drvdata {
 	struct gpio_button_data data[0];
 };
 
-static void gpio_keys_report_event(struct work_struct *work)
+static void gpio_keys_report_event(struct gpio_button_data *bdata)
 {
-	struct gpio_button_data *bdata =
-		container_of(work, struct gpio_button_data, work);
 	struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
@@ -51,6 +48,14 @@ static void gpio_keys_report_event(struct work_struct *work)
 	input_sync(input);
 }
 
+static void gpio_keys_work_func(struct work_struct *work)
+{
+	struct gpio_button_data *bdata =
+		container_of(work, struct gpio_button_data, work);
+
+	gpio_keys_report_event(bdata);
+}
+
 static void gpio_keys_timer(unsigned long _data)
 {
 	struct gpio_button_data *data = (struct gpio_button_data *)_data;
@@ -74,10 +79,62 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int __devinit gpio_keys_setup_key(struct device *dev,
+					 struct gpio_button_data *bdata,
+					 struct gpio_keys_button *button)
+{
+	char *desc = button->desc ? button->desc : "gpio_keys";
+	int irq, error;
+
+	setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata);
+	INIT_WORK(&bdata->work, gpio_keys_work_func);
+
+	error = gpio_request(button->gpio, desc);
+	if (error < 0) {
+		dev_err(dev, "failed to request GPIO %d, error %d\n",
+			button->gpio, error);
+		goto fail2;
+	}
+
+	error = gpio_direction_input(button->gpio);
+	if (error < 0) {
+		dev_err(dev, "failed to configure"
+			" direction for GPIO %d, error %d\n",
+			button->gpio, error);
+		goto fail3;
+	}
+
+	irq = gpio_to_irq(button->gpio);
+	if (irq < 0) {
+		error = irq;
+		dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n",
+			button->gpio, error);
+		goto fail3;
+	}
+
+	error = request_irq(irq, gpio_keys_isr,
+			    IRQF_SHARED |
+			    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			    desc, bdata);
+	if (error) {
+		dev_err(dev, "Unable to claim irq %d; error %d\n",
+			irq, error);
+		goto fail3;
+	}
+
+	return 0;
+
+fail3:
+	gpio_free(button->gpio);
+fail2:
+	return error;
+}
+
 static int __devinit gpio_keys_probe(struct platform_device *pdev)
 {
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	struct gpio_keys_drvdata *ddata;
+	struct device *dev = &pdev->dev;
 	struct input_dev *input;
 	int i, error;
 	int wakeup = 0;
@@ -87,6 +144,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 			GFP_KERNEL);
 	input = input_allocate_device();
 	if (!ddata || !input) {
+		dev_err(dev, "failed to allocate state\n");
 		error = -ENOMEM;
 		goto fail1;
 	}
@@ -111,52 +169,14 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		struct gpio_keys_button *button = &pdata->buttons[i];
 		struct gpio_button_data *bdata = &ddata->data[i];
-		int irq;
 		unsigned int type = button->type ?: EV_KEY;
 
 		bdata->input = input;
 		bdata->button = button;
-		setup_timer(&bdata->timer,
-			    gpio_keys_timer, (unsigned long)bdata);
-		INIT_WORK(&bdata->work, gpio_keys_report_event);
-
-		error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
-		if (error < 0) {
-			pr_err("gpio-keys: failed to request GPIO %d,"
-				" error %d\n", button->gpio, error);
-			goto fail2;
-		}
-
-		error = gpio_direction_input(button->gpio);
-		if (error < 0) {
-			pr_err("gpio-keys: failed to configure input"
-				" direction for GPIO %d, error %d\n",
-				button->gpio, error);
-			gpio_free(button->gpio);
-			goto fail2;
-		}
-
-		irq = gpio_to_irq(button->gpio);
-		if (irq < 0) {
-			error = irq;
-			pr_err("gpio-keys: Unable to get irq number"
-				" for GPIO %d, error %d\n",
-				button->gpio, error);
-			gpio_free(button->gpio);
-			goto fail2;
-		}
 
-		error = request_irq(irq, gpio_keys_isr,
-				    IRQF_SHARED |
-				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				    button->desc ? button->desc : "gpio_keys",
-				    bdata);
-		if (error) {
-			pr_err("gpio-keys: Unable to claim irq %d; error %d\n",
-				irq, error);
-			gpio_free(button->gpio);
+		error = gpio_keys_setup_key(dev, bdata, button);
+		if (error)
 			goto fail2;
-		}
 
 		if (button->wakeup)
 			wakeup = 1;
@@ -166,11 +186,16 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 
 	error = input_register_device(input);
 	if (error) {
-		pr_err("gpio-keys: Unable to register input device, "
+		dev_err(dev, "Unable to register input device, "
 			"error: %d\n", error);
 		goto fail2;
 	}
 
+	/* get current state of buttons */
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_keys_report_event(&ddata->data[i]);
+	input_sync(input);
+
 	device_init_wakeup(&pdev->dev, wakeup);
 
 	return 0;
@@ -239,18 +264,21 @@ static int gpio_keys_suspend(struct device *dev)
 static int gpio_keys_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
 	int i;
 
-	if (device_may_wakeup(&pdev->dev)) {
-		for (i = 0; i < pdata->nbuttons; i++) {
-			struct gpio_keys_button *button = &pdata->buttons[i];
-			if (button->wakeup) {
-				int irq = gpio_to_irq(button->gpio);
-				disable_irq_wake(irq);
-			}
+	for (i = 0; i < pdata->nbuttons; i++) {
+
+		struct gpio_keys_button *button = &pdata->buttons[i];
+		if (button->wakeup && device_may_wakeup(&pdev->dev)) {
+			int irq = gpio_to_irq(button->gpio);
+			disable_irq_wake(irq);
 		}
+
+		gpio_keys_report_event(&ddata->data[i]);
 	}
+	input_sync(ddata->input);
 
 	return 0;
 }
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index f9847e0fb55..fa9bb6d235e 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -72,9 +72,9 @@
 
 #define DRIVER_DESC	"LK keyboard driver"
 
-MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
 
 /*
  * Known parameters:
@@ -85,27 +85,27 @@ MODULE_LICENSE ("GPL");
  * Please notice that there's not yet an API to set these at runtime.
  */
 static int bell_volume = 100; /* % */
-module_param (bell_volume, int, 0);
-MODULE_PARM_DESC (bell_volume, "Bell volume (in %). default is 100%");
+module_param(bell_volume, int, 0);
+MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%");
 
 static int keyclick_volume = 100; /* % */
-module_param (keyclick_volume, int, 0);
-MODULE_PARM_DESC (keyclick_volume, "Keyclick volume (in %), default is 100%");
+module_param(keyclick_volume, int, 0);
+MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%");
 
 static int ctrlclick_volume = 100; /* % */
-module_param (ctrlclick_volume, int, 0);
-MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
+module_param(ctrlclick_volume, int, 0);
+MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
 
 static int lk201_compose_is_alt;
-module_param (lk201_compose_is_alt, int, 0);
-MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
-		"will act as an Alt key");
+module_param(lk201_compose_is_alt, int, 0);
+MODULE_PARM_DESC(lk201_compose_is_alt,
+		 "If set non-zero, LK201' Compose key will act as an Alt key");
 
 
 
 #undef LKKBD_DEBUG
 #ifdef LKKBD_DEBUG
-#define DBG(x...) printk (x)
+#define DBG(x...) printk(x)
 #else
 #define DBG(x...) do {} while (0)
 #endif
@@ -122,7 +122,7 @@ MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
 #define LK_MODE_DOWN		0x80
 #define LK_MODE_AUTODOWN	0x82
 #define LK_MODE_UPDOWN		0x86
-#define LK_CMD_SET_MODE(mode,div)	((mode) | ((div) << 3))
+#define LK_CMD_SET_MODE(mode, div)	((mode) | ((div) << 3))
 
 /* Misc commands */
 #define LK_CMD_ENABLE_KEYCLICK	0x1b
@@ -152,11 +152,8 @@ MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
 
 #define LK_NUM_KEYCODES		256
 #define LK_NUM_IGNORE_BYTES	6
-typedef u_int16_t lk_keycode_t;
 
-
-
-static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = {
+static unsigned short lkkbd_keycode[LK_NUM_KEYCODES] = {
 	[0x56] = KEY_F1,
 	[0x57] = KEY_F2,
 	[0x58] = KEY_F3,
@@ -268,7 +265,7 @@ static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = {
 };
 
 #define CHECK_LED(LK, VAR_ON, VAR_OFF, LED, BITS) do {		\
-	if (test_bit (LED, (LK)->dev->led))			\
+	if (test_bit(LED, (LK)->dev->led))			\
 		VAR_ON |= BITS;					\
 	else							\
 		VAR_OFF |= BITS;				\
@@ -278,7 +275,7 @@ static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = {
  * Per-keyboard data
  */
 struct lkkbd {
-	lk_keycode_t keycode[LK_NUM_KEYCODES];
+	unsigned short keycode[LK_NUM_KEYCODES];
 	int ignore_bytes;
 	unsigned char id[LK_NUM_IGNORE_BYTES];
 	struct input_dev *dev;
@@ -301,26 +298,25 @@ static struct {
 	unsigned char *name;
 } lk_response[] = {
 #define RESPONSE(x) { .value = (x), .name = #x, }
-	RESPONSE (LK_STUCK_KEY),
-	RESPONSE (LK_SELFTEST_FAILED),
-	RESPONSE (LK_ALL_KEYS_UP),
-	RESPONSE (LK_METRONOME),
-	RESPONSE (LK_OUTPUT_ERROR),
-	RESPONSE (LK_INPUT_ERROR),
-	RESPONSE (LK_KBD_LOCKED),
-	RESPONSE (LK_KBD_TEST_MODE_ACK),
-	RESPONSE (LK_PREFIX_KEY_DOWN),
-	RESPONSE (LK_MODE_CHANGE_ACK),
-	RESPONSE (LK_RESPONSE_RESERVED),
+	RESPONSE(LK_STUCK_KEY),
+	RESPONSE(LK_SELFTEST_FAILED),
+	RESPONSE(LK_ALL_KEYS_UP),
+	RESPONSE(LK_METRONOME),
+	RESPONSE(LK_OUTPUT_ERROR),
+	RESPONSE(LK_INPUT_ERROR),
+	RESPONSE(LK_KBD_LOCKED),
+	RESPONSE(LK_KBD_TEST_MODE_ACK),
+	RESPONSE(LK_PREFIX_KEY_DOWN),
+	RESPONSE(LK_MODE_CHANGE_ACK),
+	RESPONSE(LK_RESPONSE_RESERVED),
 #undef RESPONSE
 };
 
-static unsigned char *
-response_name (unsigned char value)
+static unsigned char *response_name(unsigned char value)
 {
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE (lk_response); i++)
+	for (i = 0; i < ARRAY_SIZE(lk_response); i++)
 		if (lk_response[i].value == value)
 			return lk_response[i].name;
 
@@ -331,8 +327,7 @@ response_name (unsigned char value)
 /*
  * Calculate volume parameter byte for a given volume.
  */
-static unsigned char
-volume_to_hw (int volume_percent)
+static unsigned char volume_to_hw(int volume_percent)
 {
 	unsigned char ret = 0;
 
@@ -363,8 +358,7 @@ volume_to_hw (int volume_percent)
 	return ret;
 }
 
-static void
-lkkbd_detection_done (struct lkkbd *lk)
+static void lkkbd_detection_done(struct lkkbd *lk)
 {
 	int i;
 
@@ -377,190 +371,202 @@ lkkbd_detection_done (struct lkkbd *lk)
 	 * Print keyboard name and modify Compose=Alt on user's request.
 	 */
 	switch (lk->id[4]) {
-		case 1:
-			strlcpy (lk->name, "DEC LK201 keyboard",
-				 sizeof (lk->name));
-
-			if (lk201_compose_is_alt)
-				lk->keycode[0xb1] = KEY_LEFTALT;
-			break;
-
-		case 2:
-			strlcpy (lk->name, "DEC LK401 keyboard",
-				 sizeof (lk->name));
-			break;
-
-		default:
-			strlcpy (lk->name, "Unknown DEC keyboard",
-				 sizeof (lk->name));
-			printk (KERN_ERR "lkkbd: keyboard on %s is unknown, "
-					"please report to Jan-Benedict Glaw "
-					"<jbglaw@lug-owl.de>\n", lk->phys);
-			printk (KERN_ERR "lkkbd: keyboard ID'ed as:");
-			for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
-				printk (" 0x%02x", lk->id[i]);
-			printk ("\n");
-			break;
+	case 1:
+		strlcpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name));
+
+		if (lk201_compose_is_alt)
+			lk->keycode[0xb1] = KEY_LEFTALT;
+		break;
+
+	case 2:
+		strlcpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name));
+		break;
+
+	default:
+		strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
+		printk(KERN_ERR
+			"lkkbd: keyboard on %s is unknown, please report to "
+			"Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys);
+		printk(KERN_ERR "lkkbd: keyboard ID'ed as:");
+		for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
+			printk(" 0x%02x", lk->id[i]);
+		printk("\n");
+		break;
 	}
-	printk (KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
-			lk->phys, lk->name);
+
+	printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
+		lk->phys, lk->name);
 
 	/*
 	 * Report errors during keyboard boot-up.
 	 */
 	switch (lk->id[2]) {
-		case 0x00:
-			/* All okay */
-			break;
-
-		case LK_STUCK_KEY:
-			printk (KERN_ERR "lkkbd: Stuck key on keyboard at "
-					"%s\n", lk->phys);
-			break;
-
-		case LK_SELFTEST_FAILED:
-			printk (KERN_ERR "lkkbd: Selftest failed on keyboard "
-					"at %s, keyboard may not work "
-					"properly\n", lk->phys);
-			break;
-
-		default:
-			printk (KERN_ERR "lkkbd: Unknown error %02x on "
-					"keyboard at %s\n", lk->id[2],
-					lk->phys);
-			break;
+	case 0x00:
+		/* All okay */
+		break;
+
+	case LK_STUCK_KEY:
+		printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n",
+			lk->phys);
+		break;
+
+	case LK_SELFTEST_FAILED:
+		printk(KERN_ERR
+			"lkkbd: Selftest failed on keyboard at %s, "
+			"keyboard may not work properly\n", lk->phys);
+		break;
+
+	default:
+		printk(KERN_ERR
+			"lkkbd: Unknown error %02x on keyboard at %s\n",
+			lk->id[2], lk->phys);
+		break;
 	}
 
 	/*
 	 * Try to hint user if there's a stuck key.
 	 */
 	if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0)
-		printk (KERN_ERR "Scancode of stuck key is 0x%02x, keycode "
-				"is 0x%04x\n", lk->id[3],
-				lk->keycode[lk->id[3]]);
-
-	return;
+		printk(KERN_ERR
+			"Scancode of stuck key is 0x%02x, keycode is 0x%04x\n",
+			lk->id[3], lk->keycode[lk->id[3]]);
 }
 
 /*
  * lkkbd_interrupt() is called by the low level driver when a character
  * is received.
  */
-static irqreturn_t
-lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags)
+static irqreturn_t lkkbd_interrupt(struct serio *serio,
+				   unsigned char data, unsigned int flags)
 {
-	struct lkkbd *lk = serio_get_drvdata (serio);
+	struct lkkbd *lk = serio_get_drvdata(serio);
+	struct input_dev *input_dev = lk->dev;
+	unsigned int keycode;
 	int i;
 
-	DBG (KERN_INFO "Got byte 0x%02x\n", data);
+	DBG(KERN_INFO "Got byte 0x%02x\n", data);
 
 	if (lk->ignore_bytes > 0) {
-		DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name);
+		DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name);
 		lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
 
 		if (lk->ignore_bytes == 0)
-			lkkbd_detection_done (lk);
+			lkkbd_detection_done(lk);
 
 		return IRQ_HANDLED;
 	}
 
 	switch (data) {
-		case LK_ALL_KEYS_UP:
-			for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++)
-				if (lk->keycode[i] != KEY_RESERVED)
-					input_report_key (lk->dev, lk->keycode[i], 0);
-			input_sync (lk->dev);
-			break;
-
-		case 0x01:
-			DBG (KERN_INFO "Got 0x01, scheduling re-initialization\n");
-			lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
-			lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
-			schedule_work (&lk->tq);
-			break;
-
-		case LK_METRONOME:
-		case LK_OUTPUT_ERROR:
-		case LK_INPUT_ERROR:
-		case LK_KBD_LOCKED:
-		case LK_KBD_TEST_MODE_ACK:
-		case LK_PREFIX_KEY_DOWN:
-		case LK_MODE_CHANGE_ACK:
-		case LK_RESPONSE_RESERVED:
-			DBG (KERN_INFO "Got %s and don't know how to handle...\n",
-					response_name (data));
-			break;
-
-		default:
-			if (lk->keycode[data] != KEY_RESERVED) {
-				if (!test_bit (lk->keycode[data], lk->dev->key))
-					input_report_key (lk->dev, lk->keycode[data], 1);
-				else
-					input_report_key (lk->dev, lk->keycode[data], 0);
-				input_sync (lk->dev);
-                        } else
-                                printk (KERN_WARNING "%s: Unknown key with "
-						"scancode 0x%02x on %s.\n",
-						__FILE__, data, lk->name);
+	case LK_ALL_KEYS_UP:
+		for (i = 0; i < ARRAY_SIZE(lkkbd_keycode); i++)
+			input_report_key(input_dev, lk->keycode[i], 0);
+		input_sync(input_dev);
+		break;
+
+	case 0x01:
+		DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n");
+		lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
+		lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
+		schedule_work(&lk->tq);
+		break;
+
+	case LK_METRONOME:
+	case LK_OUTPUT_ERROR:
+	case LK_INPUT_ERROR:
+	case LK_KBD_LOCKED:
+	case LK_KBD_TEST_MODE_ACK:
+	case LK_PREFIX_KEY_DOWN:
+	case LK_MODE_CHANGE_ACK:
+	case LK_RESPONSE_RESERVED:
+		DBG(KERN_INFO "Got %s and don't know how to handle...\n",
+			response_name(data));
+		break;
+
+	default:
+		keycode = lk->keycode[data];
+		if (keycode != KEY_RESERVED) {
+			input_report_key(input_dev, keycode,
+					 !test_bit(keycode, input_dev->key));
+			input_sync(input_dev);
+		} else {
+			printk(KERN_WARNING
+				"%s: Unknown key with scancode 0x%02x on %s.\n",
+				__FILE__, data, lk->name);
+		}
 	}
 
 	return IRQ_HANDLED;
 }
 
+static void lkkbd_toggle_leds(struct lkkbd *lk)
+{
+	struct serio *serio = lk->serio;
+	unsigned char leds_on = 0;
+	unsigned char leds_off = 0;
+
+	CHECK_LED(lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
+	CHECK_LED(lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
+	CHECK_LED(lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
+	CHECK_LED(lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
+	if (leds_on != 0) {
+		serio_write(serio, LK_CMD_LED_ON);
+		serio_write(serio, leds_on);
+	}
+	if (leds_off != 0) {
+		serio_write(serio, LK_CMD_LED_OFF);
+		serio_write(serio, leds_off);
+	}
+}
+
+static void lkkbd_toggle_keyclick(struct lkkbd *lk, bool on)
+{
+	struct serio *serio = lk->serio;
+
+	if (on) {
+		DBG("%s: Activating key clicks\n", __func__);
+		serio_write(serio, LK_CMD_ENABLE_KEYCLICK);
+		serio_write(serio, volume_to_hw(lk->keyclick_volume));
+		serio_write(serio, LK_CMD_ENABLE_CTRCLICK);
+		serio_write(serio, volume_to_hw(lk->ctrlclick_volume));
+	} else {
+		DBG("%s: Deactivating key clicks\n", __func__);
+		serio_write(serio, LK_CMD_DISABLE_KEYCLICK);
+		serio_write(serio, LK_CMD_DISABLE_CTRCLICK);
+	}
+
+}
+
 /*
  * lkkbd_event() handles events from the input module.
  */
-static int
-lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code,
-		int value)
+static int lkkbd_event(struct input_dev *dev,
+			unsigned int type, unsigned int code, int value)
 {
-	struct lkkbd *lk = input_get_drvdata (dev);
-	unsigned char leds_on = 0;
-	unsigned char leds_off = 0;
+	struct lkkbd *lk = input_get_drvdata(dev);
 
 	switch (type) {
-		case EV_LED:
-			CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
-			CHECK_LED (lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
-			CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
-			CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
-			if (leds_on != 0) {
-				serio_write (lk->serio, LK_CMD_LED_ON);
-				serio_write (lk->serio, leds_on);
-			}
-			if (leds_off != 0) {
-				serio_write (lk->serio, LK_CMD_LED_OFF);
-				serio_write (lk->serio, leds_off);
-			}
+	case EV_LED:
+		lkkbd_toggle_leds(lk);
+		return 0;
+
+	case EV_SND:
+		switch (code) {
+		case SND_CLICK:
+			lkkbd_toggle_keyclick(lk, value);
 			return 0;
 
-		case EV_SND:
-			switch (code) {
-				case SND_CLICK:
-					if (value == 0) {
-						DBG ("%s: Deactivating key clicks\n", __func__);
-						serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK);
-						serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK);
-					} else {
-						DBG ("%s: Activating key clicks\n", __func__);
-						serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
-						serio_write (lk->serio, volume_to_hw (lk->keyclick_volume));
-						serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
-						serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume));
-					}
-					return 0;
-
-				case SND_BELL:
-					if (value != 0)
-						serio_write (lk->serio, LK_CMD_SOUND_BELL);
-
-					return 0;
-			}
-			break;
-
-		default:
-			printk (KERN_ERR "%s (): Got unknown type %d, code %d, value %d\n",
-					__func__, type, code, value);
+		case SND_BELL:
+			if (value != 0)
+				serio_write(lk->serio, LK_CMD_SOUND_BELL);
+
+			return 0;
+		}
+
+		break;
+
+	default:
+		printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n",
+			__func__, type, code, value);
 	}
 
 	return -1;
@@ -570,79 +576,56 @@ lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code,
  * lkkbd_reinit() sets leds and beeps to a state the computer remembers they
  * were in.
  */
-static void
-lkkbd_reinit (struct work_struct *work)
+static void lkkbd_reinit(struct work_struct *work)
 {
 	struct lkkbd *lk = container_of(work, struct lkkbd, tq);
 	int division;
-	unsigned char leds_on = 0;
-	unsigned char leds_off = 0;
 
 	/* Ask for ID */
-	serio_write (lk->serio, LK_CMD_REQUEST_ID);
+	serio_write(lk->serio, LK_CMD_REQUEST_ID);
 
 	/* Reset parameters */
-	serio_write (lk->serio, LK_CMD_SET_DEFAULTS);
+	serio_write(lk->serio, LK_CMD_SET_DEFAULTS);
 
 	/* Set LEDs */
-	CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
-	CHECK_LED (lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
-	CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
-	CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
-	if (leds_on != 0) {
-		serio_write (lk->serio, LK_CMD_LED_ON);
-		serio_write (lk->serio, leds_on);
-	}
-	if (leds_off != 0) {
-		serio_write (lk->serio, LK_CMD_LED_OFF);
-		serio_write (lk->serio, leds_off);
-	}
+	lkkbd_toggle_leds(lk);
 
 	/*
 	 * Try to activate extended LK401 mode. This command will
 	 * only work with a LK401 keyboard and grants access to
 	 * LAlt, RAlt, RCompose and RShift.
 	 */
-	serio_write (lk->serio, LK_CMD_ENABLE_LK401);
+	serio_write(lk->serio, LK_CMD_ENABLE_LK401);
 
 	/* Set all keys to UPDOWN mode */
 	for (division = 1; division <= 14; division++)
-		serio_write (lk->serio, LK_CMD_SET_MODE (LK_MODE_UPDOWN,
-					division));
+		serio_write(lk->serio,
+			    LK_CMD_SET_MODE(LK_MODE_UPDOWN, division));
 
 	/* Enable bell and set volume */
-	serio_write (lk->serio, LK_CMD_ENABLE_BELL);
-	serio_write (lk->serio, volume_to_hw (lk->bell_volume));
+	serio_write(lk->serio, LK_CMD_ENABLE_BELL);
+	serio_write(lk->serio, volume_to_hw(lk->bell_volume));
 
 	/* Enable/disable keyclick (and possibly set volume) */
-	if (test_bit (SND_CLICK, lk->dev->snd)) {
-		serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
-		serio_write (lk->serio, volume_to_hw (lk->keyclick_volume));
-		serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
-		serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume));
-	} else {
-		serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK);
-		serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK);
-	}
+	lkkbd_toggle_keyclick(lk, test_bit(SND_CLICK, lk->dev->snd));
 
 	/* Sound the bell if needed */
-	if (test_bit (SND_BELL, lk->dev->snd))
-		serio_write (lk->serio, LK_CMD_SOUND_BELL);
+	if (test_bit(SND_BELL, lk->dev->snd))
+		serio_write(lk->serio, LK_CMD_SOUND_BELL);
 }
 
 /*
  * lkkbd_connect() probes for a LK keyboard and fills the necessary structures.
  */
-static int
-lkkbd_connect (struct serio *serio, struct serio_driver *drv)
+static int lkkbd_connect(struct serio *serio, struct serio_driver *drv)
 {
 	struct lkkbd *lk;
 	struct input_dev *input_dev;
 	int i;
 	int err;
 
-	lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL);
-	input_dev = input_allocate_device ();
+	lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
 	if (!lk || !input_dev) {
 		err = -ENOMEM;
 		goto fail1;
@@ -650,14 +633,14 @@ lkkbd_connect (struct serio *serio, struct serio_driver *drv)
 
 	lk->serio = serio;
 	lk->dev = input_dev;
-	INIT_WORK (&lk->tq, lkkbd_reinit);
+	INIT_WORK(&lk->tq, lkkbd_reinit);
 	lk->bell_volume = bell_volume;
 	lk->keyclick_volume = keyclick_volume;
 	lk->ctrlclick_volume = ctrlclick_volume;
-	memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES);
+	memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode));
 
-	strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name));
-	snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
+	strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
+	snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
 
 	input_dev->name = lk->name;
 	input_dev->phys = lk->phys;
@@ -668,62 +651,61 @@ lkkbd_connect (struct serio *serio, struct serio_driver *drv)
 	input_dev->dev.parent = &serio->dev;
 	input_dev->event = lkkbd_event;
 
-	input_set_drvdata (input_dev, lk);
+	input_set_drvdata(input_dev, lk);
 
-	set_bit (EV_KEY, input_dev->evbit);
-	set_bit (EV_LED, input_dev->evbit);
-	set_bit (EV_SND, input_dev->evbit);
-	set_bit (EV_REP, input_dev->evbit);
-	set_bit (LED_CAPSL, input_dev->ledbit);
-	set_bit (LED_SLEEP, input_dev->ledbit);
-	set_bit (LED_COMPOSE, input_dev->ledbit);
-	set_bit (LED_SCROLLL, input_dev->ledbit);
-	set_bit (SND_BELL, input_dev->sndbit);
-	set_bit (SND_CLICK, input_dev->sndbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_LED, input_dev->evbit);
+	__set_bit(EV_SND, input_dev->evbit);
+	__set_bit(EV_REP, input_dev->evbit);
+	__set_bit(LED_CAPSL, input_dev->ledbit);
+	__set_bit(LED_SLEEP, input_dev->ledbit);
+	__set_bit(LED_COMPOSE, input_dev->ledbit);
+	__set_bit(LED_SCROLLL, input_dev->ledbit);
+	__set_bit(SND_BELL, input_dev->sndbit);
+	__set_bit(SND_CLICK, input_dev->sndbit);
 
 	input_dev->keycode = lk->keycode;
-	input_dev->keycodesize = sizeof (lk_keycode_t);
-	input_dev->keycodemax = LK_NUM_KEYCODES;
+	input_dev->keycodesize = sizeof(lk->keycode[0]);
+	input_dev->keycodemax = ARRAY_SIZE(lk->keycode);
 
 	for (i = 0; i < LK_NUM_KEYCODES; i++)
-		__set_bit (lk->keycode[i], input_dev->keybit);
+		__set_bit(lk->keycode[i], input_dev->keybit);
 	__clear_bit(KEY_RESERVED, input_dev->keybit);
 
-	serio_set_drvdata (serio, lk);
+	serio_set_drvdata(serio, lk);
 
-	err = serio_open (serio, drv);
+	err = serio_open(serio, drv);
 	if (err)
 		goto fail2;
 
-	err = input_register_device (lk->dev);
+	err = input_register_device(lk->dev);
 	if (err)
 		goto fail3;
 
-	serio_write (lk->serio, LK_CMD_POWERCYCLE_RESET);
+	serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET);
 
 	return 0;
 
- fail3:	serio_close (serio);
- fail2:	serio_set_drvdata (serio, NULL);
- fail1:	input_free_device (input_dev);
-	kfree (lk);
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(lk);
 	return err;
 }
 
 /*
  * lkkbd_disconnect() unregisters and closes behind us.
  */
-static void
-lkkbd_disconnect (struct serio *serio)
+static void lkkbd_disconnect(struct serio *serio)
 {
-	struct lkkbd *lk = serio_get_drvdata (serio);
-
-	input_get_device (lk->dev);
-	input_unregister_device (lk->dev);
-	serio_close (serio);
-	serio_set_drvdata (serio, NULL);
-	input_put_device (lk->dev);
-	kfree (lk);
+	struct lkkbd *lk = serio_get_drvdata(serio);
+
+	input_get_device(lk->dev);
+	input_unregister_device(lk->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(lk->dev);
+	kfree(lk);
 }
 
 static struct serio_device_id lkkbd_serio_ids[] = {
@@ -752,18 +734,16 @@ static struct serio_driver lkkbd_drv = {
 /*
  * The functions for insering/removing us as a module.
  */
-static int __init
-lkkbd_init (void)
+static int __init lkkbd_init(void)
 {
 	return serio_register_driver(&lkkbd_drv);
 }
 
-static void __exit
-lkkbd_exit (void)
+static void __exit lkkbd_exit(void)
 {
 	serio_unregister_driver(&lkkbd_drv);
 }
 
-module_init (lkkbd_init);
-module_exit (lkkbd_exit);
+module_init(lkkbd_init);
+module_exit(lkkbd_exit);
 
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 91cfe517026..34f4a29d497 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -213,8 +213,9 @@ static void matrix_keypad_stop(struct input_dev *dev)
 }
 
 #ifdef CONFIG_PM
-static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+static int matrix_keypad_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
@@ -228,8 +229,9 @@ static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t stat
 	return 0;
 }
 
-static int matrix_keypad_resume(struct platform_device *pdev)
+static int matrix_keypad_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
@@ -242,9 +244,9 @@ static int matrix_keypad_resume(struct platform_device *pdev)
 
 	return 0;
 }
-#else
-#define matrix_keypad_suspend	NULL
-#define matrix_keypad_resume	NULL
+
+static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
+				matrix_keypad_suspend, matrix_keypad_resume);
 #endif
 
 static int __devinit init_matrix_gpio(struct platform_device *pdev,
@@ -417,11 +419,12 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 static struct platform_driver matrix_keypad_driver = {
 	.probe		= matrix_keypad_probe,
 	.remove		= __devexit_p(matrix_keypad_remove),
-	.suspend	= matrix_keypad_suspend,
-	.resume		= matrix_keypad_resume,
 	.driver		= {
 		.name	= "matrix-keypad",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &matrix_keypad_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index a9bb2544b2d..16ec5233441 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -80,6 +80,7 @@ config INPUT_WISTRON_BTNS
 	tristate "x86 Wistron laptop button interface"
 	depends on X86 && !X86_64
 	select INPUT_POLLDEV
+	select INPUT_SPARSEKMAP
 	select NEW_LEDS
 	select LEDS_CLASS
 	select CHECK_SIGNATURE
@@ -281,6 +282,7 @@ config INPUT_RB532_BUTTON
 config INPUT_DM355EVM
 	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
 	depends on MFD_DM355EVM_MSP
+	select INPUT_SPARSEKMAP
 	help
 	  Supports the pushbuttons and IR remote used with
 	  the DM355 EVM board.
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index e290fde35e7..614b65d78fe 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -766,7 +766,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
 	ati_remote->interface = interface;
 
 	usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
-	strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
+	strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
 
 	if (udev->manufacturer)
 		strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index f2b67dc81d8..766c06911f4 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 
@@ -33,12 +34,8 @@ struct dm355evm_keys {
 	int			irq;
 };
 
-/* These initial keycodes can be remapped by dm355evm_setkeycode(). */
-static struct {
-	u16	event;
-	u16	keycode;
-} dm355evm_keys[] = {
-
+/* These initial keycodes can be remapped */
+static const struct key_entry dm355evm_keys[] = {
 	/*
 	 * Pushbuttons on the EVM board ... note that the labels for these
 	 * are SW10/SW11/etc on the PC board.  The left/right orientation
@@ -47,11 +44,11 @@ static struct {
 	 * is to the right.  (That is, rotate the board counter-clockwise
 	 * by 90 degrees from the SW10/etc and "DM355 EVM" labels.)
 	 */
-	{ 0x00d8, KEY_OK, },		/* SW12 */
-	{ 0x00b8, KEY_UP, },		/* SW13 */
-	{ 0x00e8, KEY_DOWN, },		/* SW11 */
-	{ 0x0078, KEY_LEFT, },		/* SW14 */
-	{ 0x00f0, KEY_RIGHT, },		/* SW10 */
+	{ KE_KEY, 0x00d8, { KEY_OK } },		/* SW12 */
+	{ KE_KEY, 0x00b8, { KEY_UP } },		/* SW13 */
+	{ KE_KEY, 0x00e8, { KEY_DOWN } },	/* SW11 */
+	{ KE_KEY, 0x0078, { KEY_LEFT } },	/* SW14 */
+	{ KE_KEY, 0x00f0, { KEY_RIGHT } },	/* SW10 */
 
 	/*
 	 * IR buttons ... codes assigned to match the universal remote
@@ -65,35 +62,35 @@ static struct {
 	 * RC5 codes are 14 bits, with two start bits (0x3 prefix)
 	 * and a toggle bit (masked out below).
 	 */
-	{ 0x300c, KEY_POWER, },		/* NOTE: docs omit this */
-	{ 0x3000, KEY_NUMERIC_0, },
-	{ 0x3001, KEY_NUMERIC_1, },
-	{ 0x3002, KEY_NUMERIC_2, },
-	{ 0x3003, KEY_NUMERIC_3, },
-	{ 0x3004, KEY_NUMERIC_4, },
-	{ 0x3005, KEY_NUMERIC_5, },
-	{ 0x3006, KEY_NUMERIC_6, },
-	{ 0x3007, KEY_NUMERIC_7, },
-	{ 0x3008, KEY_NUMERIC_8, },
-	{ 0x3009, KEY_NUMERIC_9, },
-	{ 0x3022, KEY_ENTER, },
-	{ 0x30ec, KEY_MODE, },		/* "tv/vcr/..." */
-	{ 0x300f, KEY_SELECT, },	/* "info" */
-	{ 0x3020, KEY_CHANNELUP, },	/* "up" */
-	{ 0x302e, KEY_MENU, },		/* "in/out" */
-	{ 0x3011, KEY_VOLUMEDOWN, },	/* "left" */
-	{ 0x300d, KEY_MUTE, },		/* "ok" */
-	{ 0x3010, KEY_VOLUMEUP, },	/* "right" */
-	{ 0x301e, KEY_SUBTITLE, },	/* "cc" */
-	{ 0x3021, KEY_CHANNELDOWN, },	/* "down" */
-	{ 0x3022, KEY_PREVIOUS, },
-	{ 0x3026, KEY_SLEEP, },
-	{ 0x3172, KEY_REWIND, },	/* NOTE: docs wrongly say 0x30ca */
-	{ 0x3175, KEY_PLAY, },
-	{ 0x3174, KEY_FASTFORWARD, },
-	{ 0x3177, KEY_RECORD, },
-	{ 0x3176, KEY_STOP, },
-	{ 0x3169, KEY_PAUSE, },
+	{ KE_KEY, 0x300c, { KEY_POWER } },	/* NOTE: docs omit this */
+	{ KE_KEY, 0x3000, { KEY_NUMERIC_0 } },
+	{ KE_KEY, 0x3001, { KEY_NUMERIC_1 } },
+	{ KE_KEY, 0x3002, { KEY_NUMERIC_2 } },
+	{ KE_KEY, 0x3003, { KEY_NUMERIC_3 } },
+	{ KE_KEY, 0x3004, { KEY_NUMERIC_4 } },
+	{ KE_KEY, 0x3005, { KEY_NUMERIC_5 } },
+	{ KE_KEY, 0x3006, { KEY_NUMERIC_6 } },
+	{ KE_KEY, 0x3007, { KEY_NUMERIC_7 } },
+	{ KE_KEY, 0x3008, { KEY_NUMERIC_8 } },
+	{ KE_KEY, 0x3009, { KEY_NUMERIC_9 } },
+	{ KE_KEY, 0x3022, { KEY_ENTER } },
+	{ KE_KEY, 0x30ec, { KEY_MODE } },	/* "tv/vcr/..." */
+	{ KE_KEY, 0x300f, { KEY_SELECT } },	/* "info" */
+	{ KE_KEY, 0x3020, { KEY_CHANNELUP } },	/* "up" */
+	{ KE_KEY, 0x302e, { KEY_MENU } },	/* "in/out" */
+	{ KE_KEY, 0x3011, { KEY_VOLUMEDOWN } },	/* "left" */
+	{ KE_KEY, 0x300d, { KEY_MUTE } },	/* "ok" */
+	{ KE_KEY, 0x3010, { KEY_VOLUMEUP } },	/* "right" */
+	{ KE_KEY, 0x301e, { KEY_SUBTITLE } },	/* "cc" */
+	{ KE_KEY, 0x3021, { KEY_CHANNELDOWN } },/* "down" */
+	{ KE_KEY, 0x3022, { KEY_PREVIOUS } },
+	{ KE_KEY, 0x3026, { KEY_SLEEP } },
+	{ KE_KEY, 0x3172, { KEY_REWIND } },	/* NOTE: docs wrongly say 0x30ca */
+	{ KE_KEY, 0x3175, { KEY_PLAY } },
+	{ KE_KEY, 0x3174, { KEY_FASTFORWARD } },
+	{ KE_KEY, 0x3177, { KEY_RECORD } },
+	{ KE_KEY, 0x3176, { KEY_STOP } },
+	{ KE_KEY, 0x3169, { KEY_PAUSE } },
 };
 
 /*
@@ -105,19 +102,18 @@ static struct {
  */
 static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
 {
-	struct dm355evm_keys	*keys = _keys;
-	int			status;
+	static u16 last_event;
+	struct dm355evm_keys *keys = _keys;
+	const struct key_entry *ke;
+	unsigned int keycode;
+	int status;
+	u16 event;
 
 	/* For simplicity we ignore INPUT_COUNT and just read
 	 * events until we get the "queue empty" indicator.
 	 * Reading INPUT_LOW decrements the count.
 	 */
 	for (;;) {
-		static u16	last_event;
-		u16		event;
-		int		keycode;
-		int		i;
-
 		status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH);
 		if (status < 0) {
 			dev_dbg(keys->dev, "input high err %d\n",
@@ -156,14 +152,9 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
 		/* ignore the RC5 toggle bit */
 		event &= ~0x0800;
 
-		/* find the key, or leave it as unknown */
-		keycode = KEY_UNKNOWN;
-		for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
-			if (dm355evm_keys[i].event != event)
-				continue;
-			keycode = dm355evm_keys[i].keycode;
-			break;
-		}
+		/* find the key, or report it as unknown */
+		ke = sparse_keymap_entry_from_scancode(keys->input, event);
+		keycode = ke ? ke->keycode : KEY_UNKNOWN;
 		dev_dbg(keys->dev,
 			"input event 0x%04x--> keycode %d\n",
 			event, keycode);
@@ -174,36 +165,8 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
 		input_report_key(keys->input, keycode, 0);
 		input_sync(keys->input);
 	}
-	return IRQ_HANDLED;
-}
 
-static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
-{
-	u16		old_keycode;
-	unsigned	i;
-
-	if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
-		return -EINVAL;
-
-	old_keycode = dm355evm_keys[index].keycode;
-	dm355evm_keys[index].keycode = keycode;
-	set_bit(keycode, dev->keybit);
-
-	for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
-		if (dm355evm_keys[index].keycode == old_keycode)
-			goto done;
-	}
-	clear_bit(old_keycode, dev->keybit);
-done:
-	return 0;
-}
-
-static int dm355evm_getkeycode(struct input_dev *dev, int index, int *keycode)
-{
-	if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
-		return -EINVAL;
-
-	return dm355evm_keys[index].keycode;
+	return IRQ_HANDLED;
 }
 
 /*----------------------------------------------------------------------*/
@@ -213,7 +176,6 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
 	struct dm355evm_keys	*keys;
 	struct input_dev	*input;
 	int			status;
-	int			i;
 
 	/* allocate instance struct and input dev */
 	keys = kzalloc(sizeof *keys, GFP_KERNEL);
@@ -242,31 +204,30 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
 	input->id.product = 0x0355;
 	input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
 
-	input->evbit[0] = BIT(EV_KEY);
-	for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++)
-		__set_bit(dm355evm_keys[i].keycode, input->keybit);
-
-	input->setkeycode = dm355evm_setkeycode;
-	input->getkeycode = dm355evm_getkeycode;
+	status = sparse_keymap_setup(input, dm355evm_keys, NULL);
+	if (status)
+		goto fail1;
 
 	/* REVISIT:  flush the event queue? */
 
 	status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
 			IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
 	if (status < 0)
-		goto fail1;
+		goto fail2;
 
 	/* register */
 	status = input_register_device(input);
 	if (status < 0)
-		goto fail2;
+		goto fail3;
 
 	platform_set_drvdata(pdev, keys);
 
 	return 0;
 
-fail2:
+fail3:
 	free_irq(keys->irq, keys);
+fail2:
+	sparse_keymap_free(input);
 fail1:
 	input_free_device(input);
 	kfree(keys);
@@ -280,6 +241,7 @@ static int __devexit dm355evm_keys_remove(struct platform_device *pdev)
 	struct dm355evm_keys	*keys = platform_get_drvdata(pdev);
 
 	free_irq(keys->irq, keys);
+	sparse_keymap_free(keys->input);
 	input_unregister_device(keys->input);
 	kfree(keys);
 
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index a53c4885fba..668913d1204 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -338,7 +338,7 @@ static int powermate_probe(struct usb_interface *intf, const struct usb_device_i
 	pm->input = input_dev;
 
 	usb_make_path(udev, pm->phys, sizeof(pm->phys));
-	strlcpy(pm->phys, "/input0", sizeof(pm->phys));
+	strlcat(pm->phys, "/input0", sizeof(pm->phys));
 
 	spin_lock_init(&pm->lock);
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index a932179c4c9..38da6ab0438 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -21,6 +21,7 @@
 #include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/input-polldev.h>
+#include <linux/input/sparse-keymap.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
@@ -224,19 +225,8 @@ static void bios_set_state(u8 subsys, int enable)
 
 /* Hardware database */
 
-struct key_entry {
-	char type;		/* See KE_* below */
-	u8 code;
-	union {
-		u16 keycode;		/* For KE_KEY */
-		struct {		/* For KE_SW */
-			u8 code;
-			u8 value;
-		} sw;
-	};
-};
-
-enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH };
+#define KE_WIFI		(KE_LAST + 1)
+#define KE_BLUETOOTH	(KE_LAST + 2)
 
 #define FE_MAIL_LED 0x01
 #define FE_WIFI_LED 0x02
@@ -644,10 +634,10 @@ static struct key_entry keymap_prestigio[] __initdata = {
  * a list of buttons and their key codes (reported when loading this module
  * with force=1) and the output of dmidecode to $MODULE_AUTHOR.
  */
-static struct dmi_system_id dmi_ids[] __initdata = {
+static const struct dmi_system_id __initconst dmi_ids[] = {
 	{
+		/* Fujitsu-Siemens Amilo Pro V2000 */
 		.callback = dmi_matched,
-		.ident = "Fujitsu-Siemens Amilo Pro V2000",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2000"),
@@ -655,8 +645,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fs_amilo_pro_v2000
 	},
 	{
+		/* Fujitsu-Siemens Amilo Pro Edition V3505 */
 		.callback = dmi_matched,
-		.ident = "Fujitsu-Siemens Amilo Pro Edition V3505",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro Edition V3505"),
@@ -664,8 +654,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fs_amilo_pro_v3505
 	},
 	{
+		/* Fujitsu-Siemens Amilo M7400 */
 		.callback = dmi_matched,
-		.ident = "Fujitsu-Siemens Amilo M7400",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M        "),
@@ -673,8 +663,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fs_amilo_pro_v2000
 	},
 	{
+		/* Maxdata Pro 7000 DX */
 		.callback = dmi_matched,
-		.ident = "Maxdata Pro 7000 DX",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"),
@@ -682,8 +672,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fs_amilo_pro_v2000
 	},
 	{
+		/* Fujitsu N3510 */
 		.callback = dmi_matched,
-		.ident = "Fujitsu N3510",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
@@ -691,8 +681,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fujitsu_n3510
 	},
 	{
+		/* Acer Aspire 1500 */
 		.callback = dmi_matched,
-		.ident = "Acer Aspire 1500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1500"),
@@ -700,8 +690,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_aspire_1500
 	},
 	{
+		/* Acer Aspire 1600 */
 		.callback = dmi_matched,
-		.ident = "Acer Aspire 1600",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1600"),
@@ -709,8 +699,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_aspire_1600
 	},
 	{
+		/* Acer Aspire 3020 */
 		.callback = dmi_matched,
-		.ident = "Acer Aspire 3020",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3020"),
@@ -718,8 +708,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_aspire_5020
 	},
 	{
+		/* Acer Aspire 5020 */
 		.callback = dmi_matched,
-		.ident = "Acer Aspire 5020",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5020"),
@@ -727,8 +717,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_aspire_5020
 	},
 	{
+		/* Acer TravelMate 2100 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 2100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2100"),
@@ -736,8 +726,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_aspire_5020
 	},
 	{
+		/* Acer TravelMate 2410 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 2410",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2410"),
@@ -745,8 +735,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_2410
 	},
 	{
+		/* Acer TravelMate C300 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate C300",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C300"),
@@ -754,8 +744,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_300
 	},
 	{
+		/* Acer TravelMate C100 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate C100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C100"),
@@ -763,8 +753,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_300
 	},
 	{
+		/* Acer TravelMate C110 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate C110",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C110"),
@@ -772,8 +762,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_110
 	},
 	{
+		/* Acer TravelMate 380 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 380",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 380"),
@@ -781,8 +771,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_380
 	},
 	{
+		/* Acer TravelMate 370 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 370",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 370"),
@@ -790,8 +780,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_380 /* keyboard minus 1 key */
 	},
 	{
+		/* Acer TravelMate 220 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 220",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 220"),
@@ -799,8 +789,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_220
 	},
 	{
+		/* Acer TravelMate 260 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 260",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 260"),
@@ -808,8 +798,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_220
 	},
 	{
+		/* Acer TravelMate 230 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 230",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 230"),
@@ -818,8 +808,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_230
 	},
 	{
+		/* Acer TravelMate 280 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 280",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 280"),
@@ -827,8 +817,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_230
 	},
 	{
+		/* Acer TravelMate 240 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 240",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 240"),
@@ -836,8 +826,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_240
 	},
 	{
+		/* Acer TravelMate 250 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 250",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 250"),
@@ -845,8 +835,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_240
 	},
 	{
+		/* Acer TravelMate 2424NWXCi */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 2424NWXCi",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2420"),
@@ -854,8 +844,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_240
 	},
 	{
+		/* Acer TravelMate 350 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 350",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 350"),
@@ -863,8 +853,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_350
 	},
 	{
+		/* Acer TravelMate 360 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 360",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
@@ -872,8 +862,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_360
 	},
 	{
+		/* Acer TravelMate 610 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 610",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 610"),
@@ -881,8 +871,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_610
 	},
 	{
+		/* Acer TravelMate 620 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 620",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 620"),
@@ -890,8 +880,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_630
 	},
 	{
+		/* Acer TravelMate 630 */
 		.callback = dmi_matched,
-		.ident = "Acer TravelMate 630",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 630"),
@@ -899,8 +889,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_acer_travelmate_630
 	},
 	{
+		/* AOpen 1559AS */
 		.callback = dmi_matched,
-		.ident = "AOpen 1559AS",
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
 			DMI_MATCH(DMI_BOARD_NAME, "E2U"),
@@ -908,8 +898,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_aopen_1559as
 	},
 	{
+		/* Medion MD 9783 */
 		.callback = dmi_matched,
-		.ident = "Medion MD 9783",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MD 9783"),
@@ -917,8 +907,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_wistron_ms2111
 	},
 	{
+		/* Medion MD 40100 */
 		.callback = dmi_matched,
-		.ident = "Medion MD 40100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "WID2000"),
@@ -926,8 +916,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_wistron_md40100
 	},
 	{
+		/* Medion MD 2900 */
 		.callback = dmi_matched,
-		.ident = "Medion MD 2900",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2000"),
@@ -935,8 +925,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_wistron_md2900
 	},
 	{
+		/* Medion MD 42200 */
 		.callback = dmi_matched,
-		.ident = "Medion MD 42200",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"),
@@ -944,8 +934,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fs_amilo_pro_v2000
 	},
 	{
+		/* Medion MD 96500 */
 		.callback = dmi_matched,
-		.ident = "Medion MD 96500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2040"),
@@ -953,8 +943,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_wistron_md96500
 	},
 	{
+		/* Medion MD 95400 */
 		.callback = dmi_matched,
-		.ident = "Medion MD 95400",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2050"),
@@ -962,8 +952,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_wistron_md96500
 	},
 	{
+		/* Fujitsu Siemens Amilo D7820 */
 		.callback = dmi_matched,
-		.ident = "Fujitsu Siemens Amilo D7820",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), /* not sure */
 			DMI_MATCH(DMI_PRODUCT_NAME, "Amilo D"),
@@ -971,8 +961,8 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		.driver_data = keymap_fs_amilo_d88x0
 	},
 	{
+		/* Fujitsu Siemens Amilo D88x0 */
 		.callback = dmi_matched,
-		.ident = "Fujitsu Siemens Amilo D88x0",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO D"),
@@ -1037,21 +1027,6 @@ static unsigned long jiffies_last_press;
 static bool wifi_enabled;
 static bool bluetooth_enabled;
 
-static void report_key(struct input_dev *dev, unsigned int keycode)
-{
-	input_report_key(dev, keycode, 1);
-	input_sync(dev);
-	input_report_key(dev, keycode, 0);
-	input_sync(dev);
-}
-
-static void report_switch(struct input_dev *dev, unsigned int code, int value)
-{
-	input_report_switch(dev, code, value);
-	input_sync(dev);
-}
-
-
  /* led management */
 static void wistron_mail_led_set(struct led_classdev *led_cdev,
 				enum led_brightness value)
@@ -1128,43 +1103,13 @@ static inline void wistron_led_resume(void)
 		led_classdev_resume(&wistron_wifi_led);
 }
 
-static struct key_entry *wistron_get_entry_by_scancode(int code)
-{
-	struct key_entry *key;
-
-	for (key = keymap; key->type != KE_END; key++)
-		if (code == key->code)
-			return key;
-
-	return NULL;
-}
-
-static struct key_entry *wistron_get_entry_by_keycode(int keycode)
-{
-	struct key_entry *key;
-
-	for (key = keymap; key->type != KE_END; key++)
-		if (key->type == KE_KEY && keycode == key->keycode)
-			return key;
-
-	return NULL;
-}
-
 static void handle_key(u8 code)
 {
-	const struct key_entry *key = wistron_get_entry_by_scancode(code);
+	const struct key_entry *key =
+		sparse_keymap_entry_from_scancode(wistron_idev->input, code);
 
 	if (key) {
 		switch (key->type) {
-		case KE_KEY:
-			report_key(wistron_idev->input, key->keycode);
-			break;
-
-		case KE_SW:
-			report_switch(wistron_idev->input,
-				      key->sw.code, key->sw.value);
-			break;
-
 		case KE_WIFI:
 			if (have_wifi) {
 				wifi_enabled = !wifi_enabled;
@@ -1180,7 +1125,9 @@ static void handle_key(u8 code)
 			break;
 
 		default:
-			BUG();
+			sparse_keymap_report_entry(wistron_idev->input,
+						   key, 1, true);
+			break;
 		}
 		jiffies_last_press = jiffies;
 	} else
@@ -1220,42 +1167,39 @@ static void wistron_poll(struct input_polled_dev *dev)
 		dev->poll_interval = POLL_INTERVAL_DEFAULT;
 }
 
-static int wistron_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int __devinit wistron_setup_keymap(struct input_dev *dev,
+					  struct key_entry *entry)
 {
-	const struct key_entry *key = wistron_get_entry_by_scancode(scancode);
+	switch (entry->type) {
 
-	if (key && key->type == KE_KEY) {
-		*keycode = key->keycode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
+	/* if wifi or bluetooth are not available, create normal keys */
+	case KE_WIFI:
+		if (!have_wifi) {
+			entry->type = KE_KEY;
+			entry->keycode = KEY_WLAN;
+		}
+		break;
 
-static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
-	struct key_entry *key;
-	int old_keycode;
-
-	if (keycode < 0 || keycode > KEY_MAX)
-		return -EINVAL;
-
-	key = wistron_get_entry_by_scancode(scancode);
-	if (key && key->type == KE_KEY) {
-		old_keycode = key->keycode;
-		key->keycode = keycode;
-		set_bit(keycode, dev->keybit);
-		if (!wistron_get_entry_by_keycode(old_keycode))
-			clear_bit(old_keycode, dev->keybit);
-		return 0;
+	case KE_BLUETOOTH:
+		if (!have_bluetooth) {
+			entry->type = KE_KEY;
+			entry->keycode = KEY_BLUETOOTH;
+		}
+		break;
+
+	case KE_END:
+		if (entry->code & FE_UNTESTED)
+			printk(KERN_WARNING "Untested laptop multimedia keys, "
+				"please report success or failure to "
+				"eric.piel@tremplin-utc.net\n");
+		break;
 	}
 
-	return -EINVAL;
+	return 0;
 }
 
 static int __devinit setup_input_dev(void)
 {
-	struct key_entry *key;
 	struct input_dev *input_dev;
 	int error;
 
@@ -1263,7 +1207,7 @@ static int __devinit setup_input_dev(void)
 	if (!wistron_idev)
 		return -ENOMEM;
 
-	wistron_idev->flush = wistron_flush;
+	wistron_idev->open = wistron_flush;
 	wistron_idev->poll = wistron_poll;
 	wistron_idev->poll_interval = POLL_INTERVAL_DEFAULT;
 
@@ -1273,56 +1217,21 @@ static int __devinit setup_input_dev(void)
 	input_dev->id.bustype = BUS_HOST;
 	input_dev->dev.parent = &wistron_device->dev;
 
-	input_dev->getkeycode = wistron_getkeycode;
-	input_dev->setkeycode = wistron_setkeycode;
-
-	for (key = keymap; key->type != KE_END; key++) {
-		switch (key->type) {
-			case KE_KEY:
-				set_bit(EV_KEY, input_dev->evbit);
-				set_bit(key->keycode, input_dev->keybit);
-				break;
-
-			case KE_SW:
-				set_bit(EV_SW, input_dev->evbit);
-				set_bit(key->sw.code, input_dev->swbit);
-				break;
-
-			/* if wifi or bluetooth are not available, create normal keys */
-			case KE_WIFI:
-				if (!have_wifi) {
-					key->type = KE_KEY;
-					key->keycode = KEY_WLAN;
-					key--;
-				}
-				break;
-
-			case KE_BLUETOOTH:
-				if (!have_bluetooth) {
-					key->type = KE_KEY;
-					key->keycode = KEY_BLUETOOTH;
-					key--;
-				}
-				break;
-
-			default:
-				break;
-		}
-	}
-
-	/* reads information flags on KE_END */
-	if (key->code & FE_UNTESTED)
-		printk(KERN_WARNING "Untested laptop multimedia keys, "
-			"please report success or failure to eric.piel"
-			"@tremplin-utc.net\n");
+	error = sparse_keymap_setup(input_dev, keymap, wistron_setup_keymap);
+	if (error)
+		goto err_free_dev;
 
 	error = input_register_polled_device(wistron_idev);
-	if (error) {
-		input_free_polled_device(wistron_idev);
-		return error;
-	}
+	if (error)
+		goto err_free_keymap;
 
 	return 0;
+
+ err_free_keymap:
+	sparse_keymap_free(input_dev);
+ err_free_dev:
+	input_free_polled_device(wistron_idev);
+	return error;
 }
 
 /* Driver core */
@@ -1371,6 +1280,7 @@ static int __devexit wistron_remove(struct platform_device *dev)
 {
 	wistron_led_remove();
 	input_unregister_polled_device(wistron_idev);
+	sparse_keymap_free(wistron_idev->input);
 	input_free_polled_device(wistron_idev);
 	bios_detach();
 
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index f36110689aa..a3f492a5085 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -28,13 +28,16 @@
 #define dbg(format, arg...) do {} while (0)
 #endif
 
-#define ALPS_DUALPOINT	0x01
-#define ALPS_WHEEL	0x02
-#define ALPS_FW_BK_1	0x04
-#define ALPS_4BTN	0x08
-#define ALPS_OLDPROTO	0x10
-#define ALPS_PASS	0x20
-#define ALPS_FW_BK_2	0x40
+
+#define ALPS_OLDPROTO		0x01	/* old style input */
+#define ALPS_DUALPOINT		0x02	/* touchpad has trackstick */
+#define ALPS_PASS		0x04	/* device has a pass-through port */
+
+#define ALPS_WHEEL		0x08	/* hardware wheel present */
+#define ALPS_FW_BK_1		0x10	/* front & back buttons present */
+#define ALPS_FW_BK_2		0x20	/* front & back buttons present */
+#define ALPS_FOUR_BUTTONS	0x40	/* 4 direction button present */
+
 
 static const struct alps_model_info alps_model_data[] = {
 	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
@@ -56,7 +59,7 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x22, 0x02, 0x0a },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
 	{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
 	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
-	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 },		  /* Dell Vostro 1400 */
+	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
 };
 
 /*
@@ -83,6 +86,7 @@ static const struct alps_model_info alps_model_data[] = {
 static void alps_process_packet(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
+	const struct alps_model_info *model = priv->i;
 	unsigned char *packet = psmouse->packet;
 	struct input_dev *dev = psmouse->dev;
 	struct input_dev *dev2 = priv->dev2;
@@ -101,7 +105,7 @@ static void alps_process_packet(struct psmouse *psmouse)
 		return;
 	}
 
-	if (priv->i->flags & ALPS_OLDPROTO) {
+	if (model->flags & ALPS_OLDPROTO) {
 		left = packet[2] & 0x10;
 		right = packet[2] & 0x08;
 		middle = 0;
@@ -117,12 +121,12 @@ static void alps_process_packet(struct psmouse *psmouse)
 		z = packet[5];
 	}
 
-	if (priv->i->flags & ALPS_FW_BK_1) {
+	if (model->flags & ALPS_FW_BK_1) {
 		back = packet[0] & 0x10;
 		forward = packet[2] & 4;
 	}
 
-	if (priv->i->flags & ALPS_FW_BK_2) {
+	if (model->flags & ALPS_FW_BK_2) {
 		back = packet[3] & 4;
 		forward = packet[2] & 4;
 		if ((middle = forward && back))
@@ -132,7 +136,7 @@ static void alps_process_packet(struct psmouse *psmouse)
 	ges = packet[2] & 1;
 	fin = packet[2] & 2;
 
-	if ((priv->i->flags & ALPS_DUALPOINT) && z == 127) {
+	if ((model->flags & ALPS_DUALPOINT) && z == 127) {
 		input_report_rel(dev2, REL_X,  (x > 383 ? (x - 768) : x));
 		input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
 
@@ -150,7 +154,8 @@ static void alps_process_packet(struct psmouse *psmouse)
 	input_report_key(dev, BTN_MIDDLE, middle);
 
 	/* Convert hardware tap to a reasonable Z value */
-	if (ges && !fin) z = 40;
+	if (ges && !fin)
+		z = 40;
 
 	/*
 	 * A "tap and drag" operation is reported by the hardware as a transition
@@ -166,8 +171,10 @@ static void alps_process_packet(struct psmouse *psmouse)
 	}
 	priv->prev_fin = fin;
 
-	if (z > 30) input_report_key(dev, BTN_TOUCH, 1);
-	if (z < 25) input_report_key(dev, BTN_TOUCH, 0);
+	if (z > 30)
+		input_report_key(dev, BTN_TOUCH, 1);
+	if (z < 25)
+		input_report_key(dev, BTN_TOUCH, 0);
 
 	if (z > 0) {
 		input_report_abs(dev, ABS_X, x);
@@ -177,14 +184,21 @@ static void alps_process_packet(struct psmouse *psmouse)
 	input_report_abs(dev, ABS_PRESSURE, z);
 	input_report_key(dev, BTN_TOOL_FINGER, z > 0);
 
-	if (priv->i->flags & ALPS_WHEEL)
+	if (model->flags & ALPS_WHEEL)
 		input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
 
-	if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+	if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
 		input_report_key(dev, BTN_FORWARD, forward);
 		input_report_key(dev, BTN_BACK, back);
 	}
 
+	if (model->flags & ALPS_FOUR_BUTTONS) {
+		input_report_key(dev, BTN_0, packet[2] & 4);
+		input_report_key(dev, BTN_1, packet[0] & 0x10);
+		input_report_key(dev, BTN_2, packet[3] & 4);
+		input_report_key(dev, BTN_3, packet[0] & 0x20);
+	}
+
 	input_sync(dev);
 }
 
@@ -393,15 +407,12 @@ static int alps_poll(struct psmouse *psmouse)
 	return 0;
 }
 
-static int alps_hw_init(struct psmouse *psmouse, int *version)
+static int alps_hw_init(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
+	const struct alps_model_info *model = priv->i;
 
-	priv->i = alps_get_model(psmouse, version);
-	if (!priv->i)
-		return -1;
-
-	if ((priv->i->flags & ALPS_PASS) &&
+	if ((model->flags & ALPS_PASS) &&
 	    alps_passthrough_mode(psmouse, true)) {
 		return -1;
 	}
@@ -416,7 +427,7 @@ static int alps_hw_init(struct psmouse *psmouse, int *version)
 		return -1;
 	}
 
-	if ((priv->i->flags & ALPS_PASS) &&
+	if ((model->flags & ALPS_PASS) &&
 	    alps_passthrough_mode(psmouse, false)) {
 		return -1;
 	}
@@ -432,12 +443,15 @@ static int alps_hw_init(struct psmouse *psmouse, int *version)
 
 static int alps_reconnect(struct psmouse *psmouse)
 {
+	const struct alps_model_info *model;
+
 	psmouse_reset(psmouse);
 
-	if (alps_hw_init(psmouse, NULL))
+	model = alps_get_model(psmouse, NULL);
+	if (!model)
 		return -1;
 
-	return 0;
+	return alps_hw_init(psmouse);
 }
 
 static void alps_disconnect(struct psmouse *psmouse)
@@ -452,6 +466,7 @@ static void alps_disconnect(struct psmouse *psmouse)
 int alps_init(struct psmouse *psmouse)
 {
 	struct alps_data *priv;
+	const struct alps_model_info *model;
 	struct input_dev *dev1 = psmouse->dev, *dev2;
 	int version;
 
@@ -463,33 +478,48 @@ int alps_init(struct psmouse *psmouse)
 	priv->dev2 = dev2;
 	psmouse->private = priv;
 
-	if (alps_hw_init(psmouse, &version))
+	model = alps_get_model(psmouse, &version);
+	if (!model)
+		goto init_fail;
+
+	priv->i = model;
+
+	if (alps_hw_init(psmouse))
 		goto init_fail;
 
 	dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
 	dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
 	dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
-	dev1->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+	dev1->keybit[BIT_WORD(BTN_LEFT)] |=
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
 
 	dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
 	input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
 	input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
 	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
 
-	if (priv->i->flags & ALPS_WHEEL) {
+	if (model->flags & ALPS_WHEEL) {
 		dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
 		dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
 	}
 
-	if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+	if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
 		dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
 		dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
 	}
 
+	if (model->flags & ALPS_FOUR_BUTTONS) {
+		dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
+		dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
+		dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
+		dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
+	} else {
+		dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
+	}
+
 	snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
 	dev2->phys = priv->phys;
-	dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
+	dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
 	dev2->id.bustype = BUS_I8042;
 	dev2->id.vendor  = 0x0002;
 	dev2->id.product = PSMOUSE_ALPS;
@@ -497,9 +527,9 @@ int alps_init(struct psmouse *psmouse)
 	dev2->dev.parent = &psmouse->ps2dev.serio->dev;
 
 	dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	dev2->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-	dev2->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+	dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+	dev2->keybit[BIT_WORD(BTN_LEFT)] =
+		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
 
 	if (input_register_device(priv->dev2))
 		goto init_fail;
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index fda35e615ab..b27684f267b 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -420,6 +420,7 @@ static void elantech_set_input_params(struct psmouse *psmouse)
 
 	__set_bit(EV_KEY, dev->evbit);
 	__set_bit(EV_ABS, dev->evbit);
+	__clear_bit(EV_REL, dev->evbit);
 
 	__set_bit(BTN_LEFT, dev->keybit);
 	__set_bit(BTN_RIGHT, dev->keybit);
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index de1e553028b..b146237266d 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -430,19 +430,6 @@ static int hgpk_register(struct psmouse *psmouse)
 	struct input_dev *dev = psmouse->dev;
 	int err;
 
-	/* unset the things that psmouse-base sets which we don't have */
-	__clear_bit(BTN_MIDDLE, dev->keybit);
-
-	/* set the things we do have */
-	__set_bit(EV_KEY, dev->evbit);
-	__set_bit(EV_REL, dev->evbit);
-
-	__set_bit(REL_X, dev->relbit);
-	__set_bit(REL_Y, dev->relbit);
-
-	__set_bit(BTN_LEFT, dev->keybit);
-	__set_bit(BTN_RIGHT, dev->keybit);
-
 	/* register handlers */
 	psmouse->protocol_handler = hgpk_process_byte;
 	psmouse->poll = hgpk_poll;
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 82811558ec3..2e6bdfea016 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -25,11 +25,13 @@ struct lifebook_data {
 	char phys[32];
 };
 
+static bool lifebook_present;
+
 static const char *desired_serio_phys;
 
-static int lifebook_set_serio_phys(const struct dmi_system_id *d)
+static int lifebook_limit_serio3(const struct dmi_system_id *d)
 {
-	desired_serio_phys = d->driver_data;
+	desired_serio_phys = "isa0060/serio3";
 	return 0;
 }
 
@@ -41,53 +43,53 @@ static int lifebook_set_6byte_proto(const struct dmi_system_id *d)
 	return 0;
 }
 
-static const struct dmi_system_id lifebook_dmi_table[] = {
+static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
 	{
-		.ident = "FLORA-ie 55mi",
+		/* FLORA-ie 55mi */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
 		},
 	},
 	{
-		.ident = "LifeBook B",
+		/* LifeBook B */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
 		},
 	},
 	{
-		.ident = "Lifebook B",
+		/* Lifebook B */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
 		},
 	},
 	{
-		.ident = "Lifebook B-2130",
+		/* Lifebook B-2130 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
 		},
 	},
 	{
-		.ident = "Lifebook B213x/B2150",
+		/* Lifebook B213x/B2150 */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
 		},
 	},
 	{
-		.ident = "Zephyr",
+		/* Zephyr */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
 		},
 	},
 	{
-		.ident = "CF-18",
+		/* Panasonic CF-18 */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
 		},
-		.callback = lifebook_set_serio_phys,
-		.driver_data = "isa0060/serio3",
+		.callback = lifebook_limit_serio3,
 	},
 	{
-		.ident = "Panasonic CF-28",
+		/* Panasonic CF-28 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "CF-28"),
@@ -95,7 +97,7 @@ static const struct dmi_system_id lifebook_dmi_table[] = {
 		.callback = lifebook_set_6byte_proto,
 	},
 	{
-		.ident = "Panasonic CF-29",
+		/* Panasonic CF-29 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
@@ -103,21 +105,27 @@ static const struct dmi_system_id lifebook_dmi_table[] = {
 		.callback = lifebook_set_6byte_proto,
 	},
 	{
-		.ident = "CF-72",
+		/* Panasonic CF-72 */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"),
 		},
 		.callback = lifebook_set_6byte_proto,
 	},
 	{
-		.ident = "Lifebook B142",
+		/* Lifebook B142 */
 		.matches = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
 		},
 	},
 	{ }
+#endif
 };
 
+void __init lifebook_module_init(void)
+{
+	lifebook_present = dmi_check_system(lifebook_dmi_table);
+}
+
 static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
 {
 	struct lifebook_data *priv = psmouse->private;
@@ -198,10 +206,10 @@ static int lifebook_absolute_mode(struct psmouse *psmouse)
 		return -1;
 
 	/*
-	   Enable absolute output -- ps2_command fails always but if
-	   you leave this call out the touchsreen will never send
-	   absolute coordinates
-	*/
+	 * Enable absolute output -- ps2_command fails always but if
+	 * you leave this call out the touchsreen will never send
+	 * absolute coordinates
+	 */
 	param = lifebook_use_6byte_proto ? 0x08 : 0x07;
 	ps2_command(ps2dev, &param, PSMOUSE_CMD_SETRES);
 
@@ -243,7 +251,7 @@ static void lifebook_disconnect(struct psmouse *psmouse)
 
 int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 {
-        if (!dmi_check_system(lifebook_dmi_table))
+        if (!lifebook_present)
                 return -1;
 
 	if (desired_serio_phys &&
@@ -283,8 +291,8 @@ static int lifebook_create_relative_device(struct psmouse *psmouse)
 
 	dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
 	dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-	dev2->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_RIGHT);
+	dev2->keybit[BIT_WORD(BTN_LEFT)] =
+				BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
 
 	error = input_register_device(priv->dev2);
 	if (error)
@@ -309,6 +317,7 @@ int lifebook_init(struct psmouse *psmouse)
 
 	dev1->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
 	dev1->relbit[0] = 0;
+	dev1->keybit[BIT_WORD(BTN_MOUSE)] = 0;
 	dev1->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 	input_set_abs_params(dev1, ABS_X, 0, max_coord, 0, 0);
 	input_set_abs_params(dev1, ABS_Y, 0, max_coord, 0, 0);
diff --git a/drivers/input/mouse/lifebook.h b/drivers/input/mouse/lifebook.h
index 407cb226bc0..4c4326c6f50 100644
--- a/drivers/input/mouse/lifebook.h
+++ b/drivers/input/mouse/lifebook.h
@@ -12,9 +12,13 @@
 #define _LIFEBOOK_H
 
 #ifdef CONFIG_MOUSE_PS2_LIFEBOOK
+void lifebook_module_init(void);
 int lifebook_detect(struct psmouse *psmouse, bool set_properties);
 int lifebook_init(struct psmouse *psmouse);
 #else
+inline void lifebook_module_init(void)
+{
+}
 inline int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 {
 	return -ENOSYS;
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index ab5dc5f5fd8..543c240a85f 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -404,8 +404,8 @@ int ps2pp_init(struct psmouse *psmouse, bool set_properties)
 			}
 		}
 
-		if (buttons < 3)
-			__clear_bit(BTN_MIDDLE, psmouse->dev->keybit);
+		if (buttons >= 3)
+			__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 
 		if (model_info)
 			ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 07c53798301..fd0bc094616 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -425,6 +425,7 @@ static int genius_detect(struct psmouse *psmouse, bool set_properties)
 		return -1;
 
 	if (set_properties) {
+		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 		__set_bit(BTN_EXTRA, psmouse->dev->keybit);
 		__set_bit(BTN_SIDE, psmouse->dev->keybit);
 		__set_bit(REL_WHEEL, psmouse->dev->relbit);
@@ -460,8 +461,10 @@ static int intellimouse_detect(struct psmouse *psmouse, bool set_properties)
 		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 		__set_bit(REL_WHEEL, psmouse->dev->relbit);
 
-		if (!psmouse->vendor) psmouse->vendor = "Generic";
-		if (!psmouse->name) psmouse->name = "Wheel Mouse";
+		if (!psmouse->vendor)
+			psmouse->vendor = "Generic";
+		if (!psmouse->name)
+			psmouse->name = "Wheel Mouse";
 		psmouse->pktsize = 4;
 	}
 
@@ -504,8 +507,10 @@ static int im_explorer_detect(struct psmouse *psmouse, bool set_properties)
 		__set_bit(BTN_SIDE, psmouse->dev->keybit);
 		__set_bit(BTN_EXTRA, psmouse->dev->keybit);
 
-		if (!psmouse->vendor) psmouse->vendor = "Generic";
-		if (!psmouse->name) psmouse->name = "Explorer Mouse";
+		if (!psmouse->vendor)
+			psmouse->vendor = "Generic";
+		if (!psmouse->name)
+			psmouse->name = "Explorer Mouse";
 		psmouse->pktsize = 4;
 	}
 
@@ -536,6 +541,7 @@ static int thinking_detect(struct psmouse *psmouse, bool set_properties)
 		return -1;
 
 	if (set_properties) {
+		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 		__set_bit(BTN_EXTRA, psmouse->dev->keybit);
 
 		psmouse->vendor = "Kensington";
@@ -551,8 +557,16 @@ static int thinking_detect(struct psmouse *psmouse, bool set_properties)
 static int ps2bare_detect(struct psmouse *psmouse, bool set_properties)
 {
 	if (set_properties) {
-		if (!psmouse->vendor) psmouse->vendor = "Generic";
-		if (!psmouse->name) psmouse->name = "Mouse";
+		if (!psmouse->vendor)
+			psmouse->vendor = "Generic";
+		if (!psmouse->name)
+			psmouse->name = "Mouse";
+
+/*
+ * We have no way of figuring true number of buttons so let's
+ * assume that the device has 3.
+ */
+		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 	}
 
 	return 0;
@@ -567,6 +581,8 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties)
 	if (set_properties) {
 		psmouse->vendor = "Cortron";
 		psmouse->name = "PS/2 Trackball";
+
+		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 		__set_bit(BTN_SIDE, psmouse->dev->keybit);
 	}
 
@@ -1184,15 +1200,16 @@ static void psmouse_disconnect(struct serio *serio)
 	mutex_unlock(&psmouse_mutex);
 }
 
-static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse_protocol *proto)
+static int psmouse_switch_protocol(struct psmouse *psmouse,
+				   const struct psmouse_protocol *proto)
 {
 	struct input_dev *input_dev = psmouse->dev;
 
 	input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
-	input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
-		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+	input_dev->keybit[BIT_WORD(BTN_MOUSE)] =
+				BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
 	input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 
 	psmouse->set_rate = psmouse_set_rate;
@@ -1209,8 +1226,7 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse
 			return -1;
 
 		psmouse->type = proto->type;
-	}
-	else
+	} else
 		psmouse->type = psmouse_extensions(psmouse,
 						   psmouse_max_proto, true);
 
@@ -1680,6 +1696,9 @@ static int __init psmouse_init(void)
 {
 	int err;
 
+	lifebook_module_init();
+	synaptics_module_init();
+
 	kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
 	if (!kpsmoused_wq) {
 		printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n");
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index f84cbd97c88..77b9fd0b3fb 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -836,6 +836,7 @@ int fsp_init(struct psmouse *psmouse)
 	priv->flags |= FSPDRV_FLAG_EN_OPC;
 
 	/* Set up various supported input event bits */
+	__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
 	__set_bit(BTN_BACK, psmouse->dev->keybit);
 	__set_bit(BTN_FORWARD, psmouse->dev->keybit);
 	__set_bit(REL_WHEEL, psmouse->dev->relbit);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index f4a61252bcc..05689e73219 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -24,6 +24,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/dmi.h>
 #include <linux/input.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
@@ -629,25 +630,26 @@ static int synaptics_reconnect(struct psmouse *psmouse)
 	return 0;
 }
 
-#if defined(__i386__)
-#include <linux/dmi.h>
-static const struct dmi_system_id toshiba_dmi_table[] = {
+static bool impaired_toshiba_kbc;
+
+static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
 	{
-		.ident = "Toshiba Satellite",
+		/* Toshiba Satellite */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
 		},
 	},
 	{
-		.ident = "Toshiba Dynabook",
+		/* Toshiba Dynabook */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "dynabook"),
 		},
 	},
 	{
-		.ident = "Toshiba Portege M300",
+		/* Toshiba Portege M300 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
@@ -655,7 +657,7 @@ static const struct dmi_system_id toshiba_dmi_table[] = {
 
 	},
 	{
-		.ident = "Toshiba Portege M300",
+		/* Toshiba Portege M300 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
@@ -664,8 +666,13 @@ static const struct dmi_system_id toshiba_dmi_table[] = {
 
 	},
 	{ }
-};
 #endif
+};
+
+void __init synaptics_module_init(void)
+{
+	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
+}
 
 int synaptics_init(struct psmouse *psmouse)
 {
@@ -718,18 +725,16 @@ int synaptics_init(struct psmouse *psmouse)
 	if (SYN_CAP_PASS_THROUGH(priv->capabilities))
 		synaptics_pt_create(psmouse);
 
-#if defined(__i386__)
 	/*
 	 * Toshiba's KBC seems to have trouble handling data from
 	 * Synaptics as full rate, switch to lower rate which is roughly
 	 * thye same as rate of standard PS/2 mouse.
 	 */
-	if (psmouse->rate >= 80 && dmi_check_system(toshiba_dmi_table)) {
+	if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
 		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
 			dmi_get_system_info(DMI_PRODUCT_NAME));
 		psmouse->rate = 40;
 	}
-#endif
 
 	return 0;
 
@@ -740,6 +745,10 @@ int synaptics_init(struct psmouse *psmouse)
 
 #else /* CONFIG_MOUSE_PS2_SYNAPTICS */
 
+void __init synaptics_module_init(void)
+{
+}
+
 int synaptics_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 871f6fe377f..838e7f2c9b3 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -105,6 +105,7 @@ struct synaptics_data {
 	int scroll;
 };
 
+void synaptics_module_init(void);
 int synaptics_detect(struct psmouse *psmouse, bool set_properties);
 int synaptics_init(struct psmouse *psmouse);
 void synaptics_reset(struct psmouse *psmouse);
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index 7283c78044a..9867dfe2a63 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -420,8 +420,8 @@ static void synaptics_i2c_check_params(struct synaptics_i2c *touch)
 }
 
 /* Control the Device polling rate / Work Handler sleep time */
-unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
-					 bool have_data)
+static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
+						bool have_data)
 {
 	unsigned long delay, nodata_count_thres;
 
@@ -520,7 +520,7 @@ static void synaptics_i2c_set_input_params(struct synaptics_i2c *touch)
 	__set_bit(BTN_LEFT, input->keybit);
 }
 
-struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
+static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
 {
 	struct synaptics_i2c *touch;
 
diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
index 0308a0faa94..909431c31ab 100644
--- a/drivers/input/mouse/touchkit_ps2.c
+++ b/drivers/input/mouse/touchkit_ps2.c
@@ -86,7 +86,8 @@ int touchkit_ps2_detect(struct psmouse *psmouse, bool set_properties)
 
 	if (set_properties) {
 		dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-		__set_bit(BTN_TOUCH, dev->keybit);
+		dev->keybit[BIT_WORD(BTN_MOUSE)] = 0;
+		dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 		input_set_abs_params(dev, ABS_X, 0, TOUCHKIT_MAX_XC, 0, 0);
 		input_set_abs_params(dev, ABS_Y, 0, TOUCHKIT_MAX_YC, 0, 0);
 
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index e354362f297..63d4a67830f 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -284,7 +284,6 @@ static int trackpoint_reconnect(struct psmouse *psmouse)
 
 int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
 {
-	struct trackpoint_data *priv;
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	unsigned char firmware_id;
 	unsigned char button_info;
@@ -301,8 +300,8 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
 		button_info = 0;
 	}
 
-	psmouse->private = priv = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
-	if (!priv)
+	psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
+	if (!psmouse->private)
 		return -1;
 
 	psmouse->vendor = "IBM";
@@ -311,7 +310,10 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
 	psmouse->reconnect = trackpoint_reconnect;
 	psmouse->disconnect = trackpoint_disconnect;
 
-	trackpoint_defaults(priv);
+	if ((button_info & 0x0f) >= 3)
+		__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+
+	trackpoint_defaults(psmouse->private);
 	trackpoint_sync(psmouse);
 
 	error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
@@ -319,7 +321,8 @@ int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
 		printk(KERN_ERR
 			"trackpoint.c: failed to create sysfs attributes, error: %d\n",
 			error);
-		kfree(priv);
+		kfree(psmouse->private);
+		psmouse->private = NULL;
 		return -1;
 	}
 
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index 70111443678..bf2c0c80d6c 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -86,27 +86,28 @@
 
 #define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
 
-MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
 
 #undef VSXXXAA_DEBUG
 #ifdef VSXXXAA_DEBUG
-#define DBG(x...) printk (x)
+#define DBG(x...) printk(x)
 #else
 #define DBG(x...) do {} while (0)
 #endif
 
 #define VSXXXAA_INTRO_MASK	0x80
 #define VSXXXAA_INTRO_HEAD	0x80
-#define IS_HDR_BYTE(x)		(((x) & VSXXXAA_INTRO_MASK)	\
-					== VSXXXAA_INTRO_HEAD)
+#define IS_HDR_BYTE(x)			\
+	(((x) & VSXXXAA_INTRO_MASK) == VSXXXAA_INTRO_HEAD)
 
 #define VSXXXAA_PACKET_MASK	0xe0
 #define VSXXXAA_PACKET_REL	0x80
 #define VSXXXAA_PACKET_ABS	0xc0
 #define VSXXXAA_PACKET_POR	0xa0
-#define MATCH_PACKET_TYPE(data, type)	(((data) & VSXXXAA_PACKET_MASK) == (type))
+#define MATCH_PACKET_TYPE(data, type)	\
+	(((data) & VSXXXAA_PACKET_MASK) == (type))
 
 
 
@@ -123,52 +124,50 @@ struct vsxxxaa {
 	char phys[32];
 };
 
-static void
-vsxxxaa_drop_bytes (struct vsxxxaa *mouse, int num)
+static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num)
 {
-	if (num >= mouse->count)
+	if (num >= mouse->count) {
 		mouse->count = 0;
-	else {
-		memmove (mouse->buf, mouse->buf + num - 1, BUFLEN - num);
+	} else {
+		memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num);
 		mouse->count -= num;
 	}
 }
 
-static void
-vsxxxaa_queue_byte (struct vsxxxaa *mouse, unsigned char byte)
+static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte)
 {
 	if (mouse->count == BUFLEN) {
-		printk (KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
-				mouse->name, mouse->phys);
-		vsxxxaa_drop_bytes (mouse, 1);
+		printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
+			mouse->name, mouse->phys);
+		vsxxxaa_drop_bytes(mouse, 1);
 	}
-	DBG (KERN_INFO "Queueing byte 0x%02x\n", byte);
+
+	DBG(KERN_INFO "Queueing byte 0x%02x\n", byte);
 
 	mouse->buf[mouse->count++] = byte;
 }
 
-static void
-vsxxxaa_detection_done (struct vsxxxaa *mouse)
+static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
 {
 	switch (mouse->type) {
-		case 0x02:
-			strlcpy (mouse->name, "DEC VSXXX-AA/-GA mouse",
-				 sizeof (mouse->name));
-			break;
-
-		case 0x04:
-			strlcpy (mouse->name, "DEC VSXXX-AB digitizer",
-				 sizeof (mouse->name));
-			break;
-
-		default:
-			snprintf (mouse->name, sizeof (mouse->name),
-				  "unknown DEC pointer device (type = 0x%02x)",
-				  mouse->type);
-			break;
+	case 0x02:
+		strlcpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
+			sizeof(mouse->name));
+		break;
+
+	case 0x04:
+		strlcpy(mouse->name, "DEC VSXXX-AB digitizer",
+			sizeof(mouse->name));
+		break;
+
+	default:
+		snprintf(mouse->name, sizeof(mouse->name),
+			 "unknown DEC pointer device (type = 0x%02x)",
+			 mouse->type);
+		break;
 	}
 
-	printk (KERN_INFO
+	printk(KERN_INFO
 		"Found %s version 0x%02x from country 0x%02x on port %s\n",
 		mouse->name, mouse->version, mouse->country, mouse->phys);
 }
@@ -176,42 +175,38 @@ vsxxxaa_detection_done (struct vsxxxaa *mouse)
 /*
  * Returns number of bytes to be dropped, 0 if packet is okay.
  */
-static int
-vsxxxaa_check_packet (struct vsxxxaa *mouse, int packet_len)
+static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len)
 {
 	int i;
 
 	/* First byte must be a header byte */
-	if (!IS_HDR_BYTE (mouse->buf[0])) {
-		DBG ("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
+	if (!IS_HDR_BYTE(mouse->buf[0])) {
+		DBG("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
 		return 1;
 	}
 
 	/* Check all following bytes */
-	if (packet_len > 1) {
-		for (i = 1; i < packet_len; i++) {
-			if (IS_HDR_BYTE (mouse->buf[i])) {
-				printk (KERN_ERR "Need to drop %d bytes "
-						"of a broken packet.\n",
-						i - 1);
-				DBG (KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
-						packet_len, i, mouse->buf[i]);
-				return i - 1;
-			}
+	for (i = 1; i < packet_len; i++) {
+		if (IS_HDR_BYTE(mouse->buf[i])) {
+			printk(KERN_ERR
+				"Need to drop %d bytes of a broken packet.\n",
+				i - 1);
+			DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
+			    packet_len, i, mouse->buf[i]);
+			return i - 1;
 		}
 	}
 
 	return 0;
 }
 
-static __inline__ int
-vsxxxaa_smells_like_packet (struct vsxxxaa *mouse, unsigned char type, size_t len)
+static inline int vsxxxaa_smells_like_packet(struct vsxxxaa *mouse,
+					     unsigned char type, size_t len)
 {
-	return (mouse->count >= len) && MATCH_PACKET_TYPE (mouse->buf[0], type);
+	return mouse->count >= len && MATCH_PACKET_TYPE(mouse->buf[0], type);
 }
 
-static void
-vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse)
+static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse)
 {
 	struct input_dev *dev = mouse->dev;
 	unsigned char *buf = mouse->buf;
@@ -232,43 +227,42 @@ vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse)
 	 * 0, bit 4 of byte 0 is direction.
 	 */
 	dx = buf[1] & 0x7f;
-	dx *= ((buf[0] >> 4) & 0x01)? 1: -1;
+	dx *= ((buf[0] >> 4) & 0x01) ? 1 : -1;
 
 	/*
 	 * Low 7 bit of byte 2 are abs(dy), bit 7 is
 	 * 0, bit 3 of byte 0 is direction.
 	 */
 	dy = buf[2] & 0x7f;
-	dy *= ((buf[0] >> 3) & 0x01)? -1: 1;
+	dy *= ((buf[0] >> 3) & 0x01) ? -1 : 1;
 
 	/*
 	 * Get button state. It's the low three bits
 	 * (for three buttons) of byte 0.
 	 */
-	left	= (buf[0] & 0x04)? 1: 0;
-	middle	= (buf[0] & 0x02)? 1: 0;
-	right	= (buf[0] & 0x01)? 1: 0;
+	left	= buf[0] & 0x04;
+	middle	= buf[0] & 0x02;
+	right	= buf[0] & 0x01;
 
-	vsxxxaa_drop_bytes (mouse, 3);
+	vsxxxaa_drop_bytes(mouse, 3);
 
-	DBG (KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
-			mouse->name, mouse->phys, dx, dy,
-			left? "L": "l", middle? "M": "m", right? "R": "r");
+	DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
+	    mouse->name, mouse->phys, dx, dy,
+	    left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r");
 
 	/*
 	 * Report what we've found so far...
 	 */
-	input_report_key (dev, BTN_LEFT, left);
-	input_report_key (dev, BTN_MIDDLE, middle);
-	input_report_key (dev, BTN_RIGHT, right);
-	input_report_key (dev, BTN_TOUCH, 0);
-	input_report_rel (dev, REL_X, dx);
-	input_report_rel (dev, REL_Y, dy);
-	input_sync (dev);
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_MIDDLE, middle);
+	input_report_key(dev, BTN_RIGHT, right);
+	input_report_key(dev, BTN_TOUCH, 0);
+	input_report_rel(dev, REL_X, dx);
+	input_report_rel(dev, REL_Y, dy);
+	input_sync(dev);
 }
 
-static void
-vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse)
+static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse)
 {
 	struct input_dev *dev = mouse->dev;
 	unsigned char *buf = mouse->buf;
@@ -296,32 +290,31 @@ vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse)
 	/*
 	 * Get button state. It's bits <4..1> of byte 0.
 	 */
-	left	= (buf[0] & 0x02)? 1: 0;
-	middle	= (buf[0] & 0x04)? 1: 0;
-	right	= (buf[0] & 0x08)? 1: 0;
-	touch	= (buf[0] & 0x10)? 1: 0;
+	left	= buf[0] & 0x02;
+	middle	= buf[0] & 0x04;
+	right	= buf[0] & 0x08;
+	touch	= buf[0] & 0x10;
 
-	vsxxxaa_drop_bytes (mouse, 5);
+	vsxxxaa_drop_bytes(mouse, 5);
 
-	DBG (KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
-			mouse->name, mouse->phys, x, y,
-			left? "L": "l", middle? "M": "m",
-			right? "R": "r", touch? "T": "t");
+	DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
+	    mouse->name, mouse->phys, x, y,
+	    left ? "L" : "l", middle ? "M" : "m",
+	    right ? "R" : "r", touch ? "T" : "t");
 
 	/*
 	 * Report what we've found so far...
 	 */
-	input_report_key (dev, BTN_LEFT, left);
-	input_report_key (dev, BTN_MIDDLE, middle);
-	input_report_key (dev, BTN_RIGHT, right);
-	input_report_key (dev, BTN_TOUCH, touch);
-	input_report_abs (dev, ABS_X, x);
-	input_report_abs (dev, ABS_Y, y);
-	input_sync (dev);
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_MIDDLE, middle);
+	input_report_key(dev, BTN_RIGHT, right);
+	input_report_key(dev, BTN_TOUCH, touch);
+	input_report_abs(dev, ABS_X, x);
+	input_report_abs(dev, ABS_Y, y);
+	input_sync(dev);
 }
 
-static void
-vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse)
+static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
 {
 	struct input_dev *dev = mouse->dev;
 	unsigned char *buf = mouse->buf;
@@ -356,24 +349,24 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse)
 	 * (for three buttons) of byte 0. Maybe even the bit <3>
 	 * has some meaning if a tablet is attached.
 	 */
-	left	= (buf[0] & 0x04)? 1: 0;
-	middle	= (buf[0] & 0x02)? 1: 0;
-	right	= (buf[0] & 0x01)? 1: 0;
+	left	= buf[0] & 0x04;
+	middle	= buf[0] & 0x02;
+	right	= buf[0] & 0x01;
 
-	vsxxxaa_drop_bytes (mouse, 4);
-	vsxxxaa_detection_done (mouse);
+	vsxxxaa_drop_bytes(mouse, 4);
+	vsxxxaa_detection_done(mouse);
 
 	if (error <= 0x1f) {
 		/* No (serious) error. Report buttons */
-		input_report_key (dev, BTN_LEFT, left);
-		input_report_key (dev, BTN_MIDDLE, middle);
-		input_report_key (dev, BTN_RIGHT, right);
-		input_report_key (dev, BTN_TOUCH, 0);
-		input_sync (dev);
+		input_report_key(dev, BTN_LEFT, left);
+		input_report_key(dev, BTN_MIDDLE, middle);
+		input_report_key(dev, BTN_RIGHT, right);
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_sync(dev);
 
 		if (error != 0)
-			printk (KERN_INFO "Your %s on %s reports error=0x%02x\n",
-					mouse->name, mouse->phys, error);
+			printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
+				mouse->name, mouse->phys, error);
 
 	}
 
@@ -381,18 +374,18 @@ vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse)
 	 * If the mouse was hot-plugged, we need to force differential mode
 	 * now... However, give it a second to recover from it's reset.
 	 */
-	printk (KERN_NOTICE "%s on %s: Forceing standard packet format, "
-			"incremental streaming mode and 72 samples/sec\n",
-			mouse->name, mouse->phys);
-	serio_write (mouse->serio, 'S');	/* Standard format */
-	mdelay (50);
-	serio_write (mouse->serio, 'R');	/* Incremental */
-	mdelay (50);
-	serio_write (mouse->serio, 'L');	/* 72 samples/sec */
+	printk(KERN_NOTICE
+		"%s on %s: Forcing standard packet format, "
+		"incremental streaming mode and 72 samples/sec\n",
+		mouse->name, mouse->phys);
+	serio_write(mouse->serio, 'S');	/* Standard format */
+	mdelay(50);
+	serio_write(mouse->serio, 'R');	/* Incremental */
+	mdelay(50);
+	serio_write(mouse->serio, 'L');	/* 72 samples/sec */
 }
 
-static void
-vsxxxaa_parse_buffer (struct vsxxxaa *mouse)
+static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
 {
 	unsigned char *buf = mouse->buf;
 	int stray_bytes;
@@ -409,122 +402,107 @@ vsxxxaa_parse_buffer (struct vsxxxaa *mouse)
 		 * activity on the mouse.
 		 */
 		while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
-			printk (KERN_ERR "%s on %s: Dropping a byte to regain "
-					"sync with mouse data stream...\n",
-					mouse->name, mouse->phys);
-			vsxxxaa_drop_bytes (mouse, 1);
+			printk(KERN_ERR "%s on %s: Dropping a byte to regain "
+				"sync with mouse data stream...\n",
+				mouse->name, mouse->phys);
+			vsxxxaa_drop_bytes(mouse, 1);
 		}
 
 		/*
 		 * Check for packets we know about.
 		 */
 
-		if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_REL, 3)) {
+		if (vsxxxaa_smells_like_packet(mouse, VSXXXAA_PACKET_REL, 3)) {
 			/* Check for broken packet */
-			stray_bytes = vsxxxaa_check_packet (mouse, 3);
-			if (stray_bytes > 0) {
-				printk (KERN_ERR "Dropping %d bytes now...\n",
-						stray_bytes);
-				vsxxxaa_drop_bytes (mouse, stray_bytes);
-				continue;
-			}
-
-			vsxxxaa_handle_REL_packet (mouse);
-			continue; /* More to parse? */
-		}
+			stray_bytes = vsxxxaa_check_packet(mouse, 3);
+			if (!stray_bytes)
+				vsxxxaa_handle_REL_packet(mouse);
 
-		if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_ABS, 5)) {
+		} else if (vsxxxaa_smells_like_packet(mouse,
+						      VSXXXAA_PACKET_ABS, 5)) {
 			/* Check for broken packet */
-			stray_bytes = vsxxxaa_check_packet (mouse, 5);
-			if (stray_bytes > 0) {
-				printk (KERN_ERR "Dropping %d bytes now...\n",
-						stray_bytes);
-				vsxxxaa_drop_bytes (mouse, stray_bytes);
-				continue;
-			}
-
-			vsxxxaa_handle_ABS_packet (mouse);
-			continue; /* More to parse? */
-		}
+			stray_bytes = vsxxxaa_check_packet(mouse, 5);
+			if (!stray_bytes)
+				vsxxxaa_handle_ABS_packet(mouse);
 
-		if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_POR, 4)) {
+		} else if (vsxxxaa_smells_like_packet(mouse,
+						      VSXXXAA_PACKET_POR, 4)) {
 			/* Check for broken packet */
-			stray_bytes = vsxxxaa_check_packet (mouse, 4);
-			if (stray_bytes > 0) {
-				printk (KERN_ERR "Dropping %d bytes now...\n",
-						stray_bytes);
-				vsxxxaa_drop_bytes (mouse, stray_bytes);
-				continue;
-			}
-
-			vsxxxaa_handle_POR_packet (mouse);
-			continue; /* More to parse? */
+			stray_bytes = vsxxxaa_check_packet(mouse, 4);
+			if (!stray_bytes)
+				vsxxxaa_handle_POR_packet(mouse);
+
+		} else {
+			break; /* No REL, ABS or POR packet found */
+		}
+
+		if (stray_bytes > 0) {
+			printk(KERN_ERR "Dropping %d bytes now...\n",
+				stray_bytes);
+			vsxxxaa_drop_bytes(mouse, stray_bytes);
 		}
 
-		break; /* No REL, ABS or POR packet found */
 	} while (1);
 }
 
-static irqreturn_t
-vsxxxaa_interrupt (struct serio *serio, unsigned char data, unsigned int flags)
+static irqreturn_t vsxxxaa_interrupt(struct serio *serio,
+				     unsigned char data, unsigned int flags)
 {
-	struct vsxxxaa *mouse = serio_get_drvdata (serio);
+	struct vsxxxaa *mouse = serio_get_drvdata(serio);
 
-	vsxxxaa_queue_byte (mouse, data);
-	vsxxxaa_parse_buffer (mouse);
+	vsxxxaa_queue_byte(mouse, data);
+	vsxxxaa_parse_buffer(mouse);
 
 	return IRQ_HANDLED;
 }
 
-static void
-vsxxxaa_disconnect (struct serio *serio)
+static void vsxxxaa_disconnect(struct serio *serio)
 {
-	struct vsxxxaa *mouse = serio_get_drvdata (serio);
+	struct vsxxxaa *mouse = serio_get_drvdata(serio);
 
-	serio_close (serio);
-	serio_set_drvdata (serio, NULL);
-	input_unregister_device (mouse->dev);
-	kfree (mouse);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(mouse->dev);
+	kfree(mouse);
 }
 
-static int
-vsxxxaa_connect (struct serio *serio, struct serio_driver *drv)
+static int vsxxxaa_connect(struct serio *serio, struct serio_driver *drv)
 {
 	struct vsxxxaa *mouse;
 	struct input_dev *input_dev;
 	int err = -ENOMEM;
 
-	mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL);
-	input_dev = input_allocate_device ();
+	mouse = kzalloc(sizeof(struct vsxxxaa), GFP_KERNEL);
+	input_dev = input_allocate_device();
 	if (!mouse || !input_dev)
 		goto fail1;
 
 	mouse->dev = input_dev;
 	mouse->serio = serio;
-	strlcat (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
-		 sizeof (mouse->name));
-	snprintf (mouse->phys, sizeof (mouse->phys), "%s/input0", serio->phys);
+	strlcat(mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
+		 sizeof(mouse->name));
+	snprintf(mouse->phys, sizeof(mouse->phys), "%s/input0", serio->phys);
 
 	input_dev->name = mouse->name;
 	input_dev->phys = mouse->phys;
 	input_dev->id.bustype = BUS_RS232;
 	input_dev->dev.parent = &serio->dev;
 
-	set_bit (EV_KEY, input_dev->evbit);		/* We have buttons */
-	set_bit (EV_REL, input_dev->evbit);
-	set_bit (EV_ABS, input_dev->evbit);
-	set_bit (BTN_LEFT, input_dev->keybit);		/* We have 3 buttons */
-	set_bit (BTN_MIDDLE, input_dev->keybit);
-	set_bit (BTN_RIGHT, input_dev->keybit);
-	set_bit (BTN_TOUCH, input_dev->keybit);		/* ...and Tablet */
-	set_bit (REL_X, input_dev->relbit);
-	set_bit (REL_Y, input_dev->relbit);
-	input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0);
-	input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0);
-
-	serio_set_drvdata (serio, mouse);
-
-	err = serio_open (serio, drv);
+	__set_bit(EV_KEY, input_dev->evbit);		/* We have buttons */
+	__set_bit(EV_REL, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(BTN_LEFT, input_dev->keybit);		/* We have 3 buttons */
+	__set_bit(BTN_MIDDLE, input_dev->keybit);
+	__set_bit(BTN_RIGHT, input_dev->keybit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);	/* ...and Tablet */
+	__set_bit(REL_X, input_dev->relbit);
+	__set_bit(REL_Y, input_dev->relbit);
+	input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+
+	serio_set_drvdata(serio, mouse);
+
+	err = serio_open(serio, drv);
 	if (err)
 		goto fail2;
 
@@ -532,18 +510,18 @@ vsxxxaa_connect (struct serio *serio, struct serio_driver *drv)
 	 * Request selftest. Standard packet format and differential
 	 * mode will be requested after the device ID'ed successfully.
 	 */
-	serio_write (serio, 'T'); /* Test */
+	serio_write(serio, 'T'); /* Test */
 
-	err = input_register_device (input_dev);
+	err = input_register_device(input_dev);
 	if (err)
 		goto fail3;
 
 	return 0;
 
- fail3:	serio_close (serio);
- fail2:	serio_set_drvdata (serio, NULL);
- fail1:	input_free_device (input_dev);
-	kfree (mouse);
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(mouse);
 	return err;
 }
 
@@ -570,18 +548,16 @@ static struct serio_driver vsxxxaa_drv = {
 	.disconnect	= vsxxxaa_disconnect,
 };
 
-static int __init
-vsxxxaa_init (void)
+static int __init vsxxxaa_init(void)
 {
 	return serio_register_driver(&vsxxxaa_drv);
 }
 
-static void __exit
-vsxxxaa_exit (void)
+static void __exit vsxxxaa_exit(void)
 {
 	serio_unregister_driver(&vsxxxaa_drv);
 }
 
-module_init (vsxxxaa_init);
-module_exit (vsxxxaa_exit);
+module_init(vsxxxaa_init);
+module_exit(vsxxxaa_exit);
 
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index aa533ceffe3..7e319d65ec5 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -201,4 +201,12 @@ config SERIO_XILINX_XPS_PS2
 	  To compile this driver as a module, choose M here: the
 	  module will be called xilinx_ps2.
 
+config SERIO_ALTERA_PS2
+	tristate "Altera UP PS/2 controller"
+	help
+	  Say Y here if you have Altera University Program PS/2 ports.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called altera_ps2.
+
 endif
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 9b6c8135955..bf945f789d0 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -22,3 +22,4 @@ obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
 obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
 obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
 obj-$(CONFIG_SERIO_XILINX_XPS_PS2)	+= xilinx_ps2.o
+obj-$(CONFIG_SERIO_ALTERA_PS2)	+= altera_ps2.o
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
new file mode 100644
index 00000000000..f479ea50919
--- /dev/null
+++ b/drivers/input/serio/altera_ps2.c
@@ -0,0 +1,200 @@
+/*
+ * Altera University Program PS2 controller driver
+ *
+ * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * Based on sa1111ps2.c, which is:
+ * Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#define DRV_NAME "altera_ps2"
+
+struct ps2if {
+	struct serio *io;
+	struct resource *iomem_res;
+	void __iomem *base;
+	unsigned irq;
+};
+
+/*
+ * Read all bytes waiting in the PS2 port.  There should be
+ * at the most one, but we loop for safety.
+ */
+static irqreturn_t altera_ps2_rxint(int irq, void *dev_id)
+{
+	struct ps2if *ps2if = dev_id;
+	unsigned int status;
+	int handled = IRQ_NONE;
+
+	while ((status = readl(ps2if->base)) & 0xffff0000) {
+		serio_interrupt(ps2if->io, status & 0xff, 0);
+		handled = IRQ_HANDLED;
+	}
+
+	return handled;
+}
+
+/*
+ * Write a byte to the PS2 port.
+ */
+static int altera_ps2_write(struct serio *io, unsigned char val)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	writel(val, ps2if->base);
+	return 0;
+}
+
+static int altera_ps2_open(struct serio *io)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	/* clear fifo */
+	while (readl(ps2if->base) & 0xffff0000)
+		/* empty */;
+
+	writel(1, ps2if->base + 4); /* enable rx irq */
+	return 0;
+}
+
+static void altera_ps2_close(struct serio *io)
+{
+	struct ps2if *ps2if = io->port_data;
+
+	writel(0, ps2if->base); /* disable rx irq */
+}
+
+/*
+ * Add one device to this driver.
+ */
+static int altera_ps2_probe(struct platform_device *pdev)
+{
+	struct ps2if *ps2if;
+	struct serio *serio;
+	int error;
+
+	ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL);
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!ps2if || !serio) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	serio->id.type		= SERIO_8042;
+	serio->write		= altera_ps2_write;
+	serio->open		= altera_ps2_open;
+	serio->close		= altera_ps2_close;
+	strlcpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name));
+	strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->port_data	= ps2if;
+	serio->dev.parent	= &pdev->dev;
+	ps2if->io		= serio;
+
+	ps2if->iomem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (ps2if->iomem_res == NULL) {
+		error = -ENOENT;
+		goto err_free_mem;
+	}
+
+	ps2if->irq  = platform_get_irq(pdev, 0);
+	if (ps2if->irq < 0) {
+		error = -ENXIO;
+		goto err_free_mem;
+	}
+
+	if (!request_mem_region(ps2if->iomem_res->start,
+				resource_size(ps2if->iomem_res), pdev->name)) {
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	ps2if->base = ioremap(ps2if->iomem_res->start,
+			      resource_size(ps2if->iomem_res));
+	if (!ps2if->base) {
+		error = -ENOMEM;
+		goto err_free_res;
+	}
+
+	error = request_irq(ps2if->irq, altera_ps2_rxint, 0, pdev->name, ps2if);
+	if (error) {
+		dev_err(&pdev->dev, "could not allocate IRQ %d: %d\n",
+			ps2if->irq, error);
+		goto err_unmap;
+	}
+
+	dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, ps2if->irq);
+
+	serio_register_port(ps2if->io);
+	platform_set_drvdata(pdev, ps2if);
+
+	return 0;
+
+ err_unmap:
+	iounmap(ps2if->base);
+ err_free_res:
+	release_mem_region(ps2if->iomem_res->start,
+			   resource_size(ps2if->iomem_res));
+ err_free_mem:
+	kfree(ps2if);
+	kfree(serio);
+	return error;
+}
+
+/*
+ * Remove one device from this driver.
+ */
+static int altera_ps2_remove(struct platform_device *pdev)
+{
+	struct ps2if *ps2if = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	serio_unregister_port(ps2if->io);
+	free_irq(ps2if->irq, ps2if);
+	iounmap(ps2if->base);
+	release_mem_region(ps2if->iomem_res->start,
+			   resource_size(ps2if->iomem_res));
+	kfree(ps2if);
+
+	return 0;
+}
+
+/*
+ * Our device driver structure
+ */
+static struct platform_driver altera_ps2_driver = {
+	.probe		= altera_ps2_probe,
+	.remove		= altera_ps2_remove,
+	.driver	= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init altera_ps2_init(void)
+{
+	return platform_driver_register(&altera_ps2_driver);
+}
+
+static void __exit altera_ps2_exit(void)
+{
+	platform_driver_unregister(&altera_ps2_driver);
+}
+
+module_init(altera_ps2_init);
+module_exit(altera_ps2_exit);
+
+MODULE_DESCRIPTION("Altera University Program PS2 controller driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2bcf1ace27c..7fbffe431bc 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -67,10 +67,12 @@ static inline void i8042_write_command(int val)
 
 #include <linux/dmi.h>
 
-static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 	{
-		/* AUX LOOP command does not raise AUX IRQ */
-		.ident = "Arima-Rioworks HDAMB",
+		/*
+		 * Arima-Rioworks HDAMB -
+		 * AUX LOOP command does not raise AUX IRQ
+		 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "RIOWORKS"),
 			DMI_MATCH(DMI_BOARD_NAME, "HDAMB"),
@@ -78,7 +80,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "ASUS G1S",
+		/* ASUS G1S */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
 			DMI_MATCH(DMI_BOARD_NAME, "G1S"),
@@ -86,8 +88,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		/* AUX LOOP command does not raise AUX IRQ */
-		.ident = "ASUS P65UP5",
+		/* ASUS P65UP5 - AUX LOOP command does not raise AUX IRQ */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 			DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"),
@@ -95,7 +96,6 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "Compaq Proliant 8500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
 			DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
@@ -103,7 +103,6 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "Compaq Proliant DL760",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
 			DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
@@ -111,7 +110,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "OQO Model 01",
+		/* OQO Model 01 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
@@ -119,8 +118,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		/* AUX LOOP does not work properly */
-		.ident = "ULI EV4873",
+		/* ULI EV4873 - AUX LOOP does not work properly */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ULI"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"),
@@ -128,7 +126,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "Microsoft Virtual Machine",
+		/* Microsoft Virtual Machine */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
@@ -136,7 +134,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "Medion MAM 2070",
+		/* Medion MAM 2070 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MAM 2070"),
@@ -144,7 +142,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "Blue FB5601",
+		/* Blue FB5601 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "blue"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"),
@@ -152,7 +150,7 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "Gigabyte M912",
+		/* Gigabyte M912 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "M912"),
@@ -160,7 +158,6 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 		},
 	},
 	{
-		.ident = "HP DV9700",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
@@ -177,72 +174,72 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
  * ... apparently some Toshibas don't like MUX mode either and
  * die horrible death on reboot.
  */
-static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 	{
-		.ident = "Fujitsu Lifebook P7010/P7010D",
+		/* Fujitsu Lifebook P7010/P7010D */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "P7010"),
 		},
 	},
 	{
-		.ident = "Fujitsu Lifebook P7010",
+		/* Fujitsu Lifebook P7010 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
 		},
 	},
 	{
-		.ident = "Fujitsu Lifebook P5020D",
+		/* Fujitsu Lifebook P5020D */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"),
 		},
 	},
 	{
-		.ident = "Fujitsu Lifebook S2000",
+		/* Fujitsu Lifebook S2000 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
 		},
 	},
 	{
-		.ident = "Fujitsu Lifebook S6230",
+		/* Fujitsu Lifebook S6230 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
 		},
 	},
 	{
-		.ident = "Fujitsu T70H",
+		/* Fujitsu T70H */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
 		},
 	},
 	{
-		.ident = "Fujitsu-Siemens Lifebook T3010",
+		/* Fujitsu-Siemens Lifebook T3010 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
 		},
 	},
 	{
-		.ident = "Fujitsu-Siemens Lifebook E4010",
+		/* Fujitsu-Siemens Lifebook E4010 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"),
 		},
 	},
 	{
-		.ident = "Fujitsu-Siemens Amilo Pro 2010",
+		/* Fujitsu-Siemens Amilo Pro 2010 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
 		},
 	},
 	{
-		.ident = "Fujitsu-Siemens Amilo Pro 2030",
+		/* Fujitsu-Siemens Amilo Pro 2030 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
@@ -253,7 +250,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		 * No data is coming from the touchscreen unless KBC
 		 * is in legacy mode.
 		 */
-		.ident = "Panasonic CF-29",
+		/* Panasonic CF-29 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
@@ -261,10 +258,10 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	},
 	{
 		/*
-		 * Errors on MUX ports are reported without raising AUXDATA
+		 * HP Pavilion DV4017EA -
+		 * errors on MUX ports are reported without raising AUXDATA
 		 * causing "spurious NAK" messages.
 		 */
-		.ident = "HP Pavilion DV4017EA",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"),
@@ -272,9 +269,9 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	},
 	{
 		/*
-		 * Like DV4017EA does not raise AUXERR for errors on MUX ports.
+		 * HP Pavilion ZT1000 -
+		 * like DV4017EA does not raise AUXERR for errors on MUX ports.
 		 */
-		.ident = "HP Pavilion ZT1000",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"),
@@ -283,44 +280,41 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	},
 	{
 		/*
-		 * Like DV4017EA does not raise AUXERR for errors on MUX ports.
+		 * HP Pavilion DV4270ca -
+		 * like DV4017EA does not raise AUXERR for errors on MUX ports.
 		 */
-		.ident = "HP Pavilion DV4270ca",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"),
 		},
 	},
 	{
-		.ident = "Toshiba P10",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
 		},
 	},
 	{
-		.ident = "Toshiba Equium A110",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
 		},
 	},
 	{
-		.ident = "Alienware Sentia",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
 		},
 	},
 	{
-		.ident = "Sharp Actius MM20",
+		/* Sharp Actius MM20 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
 		},
 	},
 	{
-		.ident = "Sony Vaio FS-115b",
+		/* Sony Vaio FS-115b */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
@@ -328,73 +322,72 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	},
 	{
 		/*
-		 * Reset and GET ID commands issued via KBD port are
+		 * Sony Vaio FZ-240E -
+		 * reset and GET ID commands issued via KBD port are
 		 * sometimes being delivered to AUX3.
 		 */
-		.ident = "Sony Vaio FZ-240E",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
 		},
 	},
 	{
-		.ident = "Amoi M636/A737",
+		/* Amoi M636/A737 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
 		},
 	},
 	{
-		.ident = "Lenovo 3000 n100",
+		/* Lenovo 3000 n100 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
 		},
 	},
 	{
-		.ident = "Acer Aspire 1360",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
 		},
 	},
 	{
-		.ident = "Gericom Bellagio",
+		/* Gericom Bellagio */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
 		},
 	},
 	{
-		.ident = "IBM 2656",
+		/* IBM 2656 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
 		},
 	},
 	{
-		.ident = "Dell XPS M1530",
+		/* Dell XPS M1530 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
 		},
 	},
 	{
-		.ident = "Compal HEL80I",
+		/* Compal HEL80I */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
 		},
 	},
 	{
-		.ident = "Dell Vostro 1510",
+		/* Dell Vostro 1510 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
 		},
 	},
 	{
-		.ident = "Acer Aspire 5536",
+		/* Acer Aspire 5536 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
@@ -404,65 +397,65 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 	{ }
 };
 
-static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 	{
-		.ident = "MSI Wind U-100",
+		/* MSI Wind U-100 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
 			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
 		},
 	},
 	{
-		.ident = "LG Electronics X110",
+		/* LG Electronics X110 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "X110"),
 			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
 		},
 	},
 	{
-		.ident = "Acer Aspire One 150",
+		/* Acer Aspire One 150 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
 		},
 	},
 	{
-		.ident = "Advent 4211",
+		/* Advent 4211 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
 		},
 	},
 	{
-		.ident = "Medion Akoya Mini E1210",
+		/* Medion Akoya Mini E1210 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
 		},
 	},
 	{
-		.ident = "Mivvy M310",
+		/* Mivvy M310 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
 		},
 	},
 	{
-		.ident = "Dell Vostro 1320",
+		/* Dell Vostro 1320 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"),
 		},
 	},
 	{
-		.ident = "Dell Vostro 1520",
+		/* Dell Vostro 1520 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"),
 		},
 	},
 	{
-		.ident = "Dell Vostro 1720",
+		/* Dell Vostro 1720 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"),
@@ -472,16 +465,16 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
 };
 
 #ifdef CONFIG_PNP
-static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_nopnp_table[] = {
 	{
-		.ident = "Intel MBO Desktop D845PESV",
+		/* Intel MBO Desktop D845PESV */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "D845PESV"),
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
 	{
-		.ident = "MSI Wind U-100",
+		/* MSI Wind U-100 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
 			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
@@ -490,27 +483,23 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 	{ }
 };
 
-static struct dmi_system_id __initdata i8042_dmi_laptop_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
 	{
-		.ident = "Portable",
 		.matches = {
 			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
 		},
 	},
 	{
-		.ident = "Laptop",
 		.matches = {
 			DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */
 		},
 	},
 	{
-		.ident = "Notebook",
 		.matches = {
 			DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
 		},
 	},
 	{
-		.ident = "Sub-Notebook",
 		.matches = {
 			DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */
 		},
@@ -525,58 +514,58 @@ static struct dmi_system_id __initdata i8042_dmi_laptop_table[] = {
  * Originally, this was just confined to older laptops, but a few Acer laptops
  * have turned up in 2007 that also need this again.
  */
-static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
 	{
-		.ident = "Acer Aspire 5630",
+		/* Acer Aspire 5630 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"),
 		},
 	},
 	{
-		.ident = "Acer Aspire 5650",
+		/* Acer Aspire 5650 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"),
 		},
 	},
 	{
-		.ident = "Acer Aspire 5680",
+		/* Acer Aspire 5680 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"),
 		},
 	},
 	{
-		.ident = "Acer Aspire 5720",
+		/* Acer Aspire 5720 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
 		},
 	},
 	{
-		.ident = "Acer Aspire 9110",
+		/* Acer Aspire 9110 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"),
 		},
 	},
 	{
-		.ident = "Acer TravelMate 660",
+		/* Acer TravelMate 660 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
 		},
 	},
 	{
-		.ident = "Acer TravelMate 2490",
+		/* Acer TravelMate 2490 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
 		},
 	},
 	{
-		.ident = "Acer TravelMate 4280",
+		/* Acer TravelMate 4280 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
new file mode 100644
index 00000000000..fbd3987af57
--- /dev/null
+++ b/drivers/input/sparse-keymap.c
@@ -0,0 +1,250 @@
+/*
+ * Generic support for sparse keymaps
+ *
+ * Copyright (c) 2009 Dmitry Torokhov
+ *
+ * Derived from wistron button driver:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("Generic support for sparse keymaps");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+
+/**
+ * sparse_keymap_entry_from_scancode - perform sparse keymap lookup
+ * @dev: Input device using sparse keymap
+ * @code: Scan code
+ *
+ * This function is used to perform &struct key_entry lookup in an
+ * input device using sparse keymap.
+ */
+struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
+						    unsigned int code)
+{
+	struct key_entry *key;
+
+	for (key = dev->keycode; key->type != KE_END; key++)
+		if (code == key->code)
+			return key;
+
+	return NULL;
+}
+EXPORT_SYMBOL(sparse_keymap_entry_from_scancode);
+
+/**
+ * sparse_keymap_entry_from_keycode - perform sparse keymap lookup
+ * @dev: Input device using sparse keymap
+ * @keycode: Key code
+ *
+ * This function is used to perform &struct key_entry lookup in an
+ * input device using sparse keymap.
+ */
+struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
+						   unsigned int keycode)
+{
+	struct key_entry *key;
+
+	for (key = dev->keycode; key->type != KE_END; key++)
+		if (key->type == KE_KEY && keycode == key->keycode)
+			return key;
+
+	return NULL;
+}
+EXPORT_SYMBOL(sparse_keymap_entry_from_keycode);
+
+static int sparse_keymap_getkeycode(struct input_dev *dev,
+				    int scancode, int *keycode)
+{
+	const struct key_entry *key =
+			sparse_keymap_entry_from_scancode(dev, scancode);
+
+	if (key && key->type == KE_KEY) {
+		*keycode = key->keycode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int sparse_keymap_setkeycode(struct input_dev *dev,
+				    int scancode, int keycode)
+{
+	struct key_entry *key;
+	int old_keycode;
+
+	if (keycode < 0 || keycode > KEY_MAX)
+		return -EINVAL;
+
+	key = sparse_keymap_entry_from_scancode(dev, scancode);
+	if (key && key->type == KE_KEY) {
+		old_keycode = key->keycode;
+		key->keycode = keycode;
+		set_bit(keycode, dev->keybit);
+		if (!sparse_keymap_entry_from_keycode(dev, old_keycode))
+			clear_bit(old_keycode, dev->keybit);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * sparse_keymap_setup - set up sparse keymap for an input device
+ * @dev: Input device
+ * @keymap: Keymap in form of array of &key_entry structures ending
+ *	with %KE_END type entry
+ * @setup: Function that can be used to adjust keymap entries
+ *	depending on device's deeds, may be %NULL
+ *
+ * The function calculates size and allocates copy of the original
+ * keymap after which sets up input device event bits appropriately.
+ * Before destroying input device allocated keymap should be freed
+ * with a call to sparse_keymap_free().
+ */
+int sparse_keymap_setup(struct input_dev *dev,
+			const struct key_entry *keymap,
+			int (*setup)(struct input_dev *, struct key_entry *))
+{
+	size_t map_size = 1; /* to account for the last KE_END entry */
+	const struct key_entry *e;
+	struct key_entry *map, *entry;
+	int i;
+	int error;
+
+	for (e = keymap; e->type != KE_END; e++)
+		map_size++;
+
+	map = kcalloc(map_size, sizeof (struct key_entry), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	memcpy(map, keymap, map_size * sizeof (struct key_entry));
+
+	for (i = 0; i < map_size; i++) {
+		entry = &map[i];
+
+		if (setup) {
+			error = setup(dev, entry);
+			if (error)
+				goto err_out;
+		}
+
+		switch (entry->type) {
+		case KE_KEY:
+			__set_bit(EV_KEY, dev->evbit);
+			__set_bit(entry->keycode, dev->keybit);
+			break;
+
+		case KE_SW:
+			__set_bit(EV_SW, dev->evbit);
+			__set_bit(entry->sw.code, dev->swbit);
+			break;
+		}
+	}
+
+	dev->keycode = map;
+	dev->keycodemax = map_size;
+	dev->getkeycode = sparse_keymap_getkeycode;
+	dev->setkeycode = sparse_keymap_setkeycode;
+
+	return 0;
+
+ err_out:
+	kfree(keymap);
+	return error;
+
+}
+EXPORT_SYMBOL(sparse_keymap_setup);
+
+/**
+ * sparse_keymap_free - free memory allocated for sparse keymap
+ * @dev: Input device using sparse keymap
+ *
+ * This function is used to free memory allocated by sparse keymap
+ * in an input device that was set up by sparse_keymap_setup().
+ */
+void sparse_keymap_free(struct input_dev *dev)
+{
+	kfree(dev->keycode);
+	dev->keycode = NULL;
+	dev->keycodemax = 0;
+	dev->getkeycode = NULL;
+	dev->setkeycode = NULL;
+}
+EXPORT_SYMBOL(sparse_keymap_free);
+
+/**
+ * sparse_keymap_report_entry - report event corresponding to given key entry
+ * @dev: Input device for which event should be reported
+ * @ke: key entry describing event
+ * @value: Value that should be reported (ignored by %KE_SW entries)
+ * @autorelease: Signals whether release event should be emitted for %KE_KEY
+ *	entries right after reporting press event, ignored by all other
+ *	entries
+ *
+ * This function is used to report input event described by given
+ * &struct key_entry.
+ */
+void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
+				unsigned int value, bool autorelease)
+{
+	switch (ke->type) {
+	case KE_KEY:
+		input_report_key(dev, ke->keycode, value);
+		input_sync(dev);
+		if (value && autorelease) {
+			input_report_key(dev, ke->keycode, 0);
+			input_sync(dev);
+		}
+		break;
+
+	case KE_SW:
+		value = ke->sw.value;
+		/* fall through */
+
+	case KE_VSW:
+		input_report_switch(dev, ke->sw.code, value);
+		break;
+	}
+}
+EXPORT_SYMBOL(sparse_keymap_report_entry);
+
+/**
+ * sparse_keymap_report_event - report event corresponding to given scancode
+ * @dev: Input device using sparse keymap
+ * @code: Scan code
+ * @value: Value that should be reported (ignored by %KE_SW entries)
+ * @autorelease: Signals whether release event should be emitted for %KE_KEY
+ *	entries right after reporting press event, ignored by all other
+ *	entries
+ *
+ * This function is used to perform lookup in an input device using sparse
+ * keymap and report corresponding event. Returns %true if lookup was
+ * successful and %false otherwise.
+ */
+bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
+				unsigned int value, bool autorelease)
+{
+	const struct key_entry *ke =
+		sparse_keymap_entry_from_scancode(dev, code);
+
+	if (ke) {
+		sparse_keymap_report_entry(dev, ke, value, autorelease);
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL(sparse_keymap_report_event);
+
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 8cc453c85ea..32fc8ba039a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -111,6 +111,18 @@ config TOUCHSCREEN_DA9034
 	  Say Y here to enable the support for the touchscreen found
 	  on Dialog Semiconductor DA9034 PMIC.
 
+config TOUCHSCREEN_DYNAPRO
+	tristate "Dynapro serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Dynapro serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dynapro.
+
 config TOUCHSCREEN_EETI
 	tristate "EETI touchscreen panel support"
 	depends on I2C
@@ -133,6 +145,18 @@ config TOUCHSCREEN_FUJITSU
 	  To compile this driver as a module, choose M here: the
 	  module will be called fujitsu-ts.
 
+config TOUCHSCREEN_S3C2410
+	tristate "Samsung S3C2410 touchscreen input driver"
+	depends on ARCH_S3C2410
+	select S3C24XX_ADC
+	help
+	  Say Y here if you have the s3c2410 touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called s3c2410_ts.
+
 config TOUCHSCREEN_GUNZE
 	tristate "Gunze AHL-51S touchscreen"
 	select SERIO
@@ -297,7 +321,7 @@ config TOUCHSCREEN_TOUCHWIN
 
 config TOUCHSCREEN_ATMEL_TSADCC
 	tristate "Atmel Touchscreen Interface"
-	depends on ARCH_AT91SAM9RL
+	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  Say Y here if you have a 4-wire touchscreen connected to the
           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
@@ -418,6 +442,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  - IdealTEK URTC1000
 	  - GoTop Super_Q2/GogoPen/PenPower tablets
 	  - JASTEC USB Touch Controller/DigiTech DTR-02U
+	  - Zytronic controllers
 
 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.
@@ -490,6 +515,16 @@ config TOUCHSCREEN_USB_E2I
 	bool "e2i Touchscreen controller (e.g. from Mimo 740)"
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_USB_ZYTRONIC
+	default y
+	bool "Zytronic controller" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETT_TC5UH
+	default y
+	bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
 config TOUCHSCREEN_TOUCHIT213
 	tristate "Sahara TouchIT-213 touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 15fa62cffc7..f1f59c9e121 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
+obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
@@ -25,7 +26,9 @@ obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_HP7XX)		+= jornada720_ts.o
 obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
+obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
@@ -41,4 +44,3 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
-obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 09c810999b9..52d2ca147d8 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -29,10 +29,9 @@
 #include <linux/spi/ads7846.h>
 #include <asm/irq.h>
 
-
 /*
  * This code has been heavily tested on a Nokia 770, and lightly
- * tested on other ads7846 devices (OSK/Mistral, Lubbock).
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz).
  * TSC2046 is just newer ads7846 silicon.
  * Support for ads7843 tested on Atmel at91sam926x-EK.
  * Support for ads7845 has only been stubbed in.
@@ -43,7 +42,7 @@
  * have to maintain our own SW IRQ disabled status. This should be
  * removed as soon as the affected platform's IRQ handling is fixed.
  *
- * app note sbaa036 talks in more detail about accurate sampling...
+ * App note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
  * This driver tries to utilize the measures described in the app
@@ -566,10 +565,8 @@ static void ads7846_rx(void *ads)
 	 * once more the measurement
 	 */
 	if (packet->tc.ignore || Rt > ts->pressure_max) {
-#ifdef VERBOSE
-		pr_debug("%s: ignored %d pressure %d\n",
-			dev_name(&ts->spi->dev), packet->tc.ignore, Rt);
-#endif
+		dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n",
+			 packet->tc.ignore, Rt);
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
 			      HRTIMER_MODE_REL);
 		return;
@@ -598,9 +595,7 @@ static void ads7846_rx(void *ads)
 		if (!ts->pendown) {
 			input_report_key(input, BTN_TOUCH, 1);
 			ts->pendown = 1;
-#ifdef VERBOSE
-			dev_dbg(&ts->spi->dev, "DOWN\n");
-#endif
+			dev_vdbg(&ts->spi->dev, "DOWN\n");
 		}
 
 		if (ts->swap_xy)
@@ -608,12 +603,10 @@ static void ads7846_rx(void *ads)
 
 		input_report_abs(input, ABS_X, x);
 		input_report_abs(input, ABS_Y, y);
-		input_report_abs(input, ABS_PRESSURE, Rt);
+		input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
 
 		input_sync(input);
-#ifdef VERBOSE
-		dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
-#endif
+		dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
 	}
 
 	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
@@ -723,9 +716,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 			input_sync(input);
 
 			ts->pendown = 0;
-#ifdef VERBOSE
-			dev_dbg(&ts->spi->dev, "UP\n");
-#endif
+			dev_vdbg(&ts->spi->dev, "UP\n");
 		}
 
 		/* measurement cycle ended */
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 9c7fce4d74d..3d9b5166ebe 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,6 +22,8 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
 
 /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
 
@@ -36,7 +38,9 @@
 #define	  ATMEL_TSADCC_LOWRES	(1    <<  4)	/* Resolution selection */
 #define	  ATMEL_TSADCC_SLEEP	(1    <<  5)	/* Sleep mode */
 #define	  ATMEL_TSADCC_PENDET	(1    <<  6)	/* Pen Detect selection */
+#define	  ATMEL_TSADCC_PRES	(1    <<  7)	/* Pressure Measurement Selection */
 #define	  ATMEL_TSADCC_PRESCAL	(0x3f <<  8)	/* Prescalar Rate Selection */
+#define	  ATMEL_TSADCC_EPRESCAL	(0xff <<  8)	/* Prescalar Rate Selection (Extended) */
 #define	  ATMEL_TSADCC_STARTUP	(0x7f << 16)	/* Start Up time */
 #define	  ATMEL_TSADCC_SHTIM	(0xf  << 24)	/* Sample & Hold time */
 #define	  ATMEL_TSADCC_PENDBC	(0xf  << 28)	/* Pen Detect debouncing time */
@@ -84,7 +88,13 @@
 #define ATMEL_TSADCC_CDR4	0x40	/* Channel Data 4 */
 #define ATMEL_TSADCC_CDR5	0x44	/* Channel Data 5 */
 
-#define ADC_CLOCK	1000000
+#define ATMEL_TSADCC_XPOS	0x50
+#define ATMEL_TSADCC_Z1DAT	0x54
+#define ATMEL_TSADCC_Z2DAT	0x58
+
+#define PRESCALER_VAL(x)	((x) >> 8)
+
+#define ADC_DEFAULT_CLOCK	100000
 
 struct atmel_tsadcc {
 	struct input_dev	*input;
@@ -172,6 +182,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
 	struct atmel_tsadcc	*ts_dev;
 	struct input_dev	*input_dev;
 	struct resource		*res;
+	struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
 	int		err = 0;
 	unsigned int	prsc;
 	unsigned int	reg;
@@ -242,31 +253,49 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
 	input_dev->phys = ts_dev->phys;
 	input_dev->dev.parent = &pdev->dev;
 
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
+	__set_bit(EV_ABS, input_dev->evbit);
 	input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
 
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
 	/* clk_enable() always returns 0, no need to check it */
 	clk_enable(ts_dev->clk);
 
 	prsc = clk_get_rate(ts_dev->clk);
 	dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
 
-	prsc = prsc / ADC_CLOCK / 2 - 1;
+	if (!pdata)
+		goto err_fail;
+
+	if (!pdata->adc_clock)
+		pdata->adc_clock = ADC_DEFAULT_CLOCK;
+
+	prsc = (prsc / (2 * pdata->adc_clock)) - 1;
+
+	/* saturate if this value is too high */
+	if (cpu_is_at91sam9rl()) {
+		if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
+			prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
+	} else {
+		if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
+			prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
+	}
+
+	dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
 
 	reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE		|
 		((0x00 << 5) & ATMEL_TSADCC_SLEEP)	|	/* Normal Mode */
 		((0x01 << 6) & ATMEL_TSADCC_PENDET)	|	/* Enable Pen Detect */
-		((prsc << 8) & ATMEL_TSADCC_PRESCAL)	|	/* PRESCAL */
-		((0x13 << 16) & ATMEL_TSADCC_STARTUP)	|	/* STARTUP */
-		((0x0F << 28) & ATMEL_TSADCC_PENDBC);		/* PENDBC */
+		(prsc << 8)				|
+		((0x26 << 16) & ATMEL_TSADCC_STARTUP)	|
+		((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
 
 	atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
 	atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
 	atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
-	atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
+	atmel_tsadcc_write(ATMEL_TSADCC_TSR,
+		(pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
 
 	atmel_tsadcc_read(ATMEL_TSADCC_SR);
 	atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
new file mode 100644
index 00000000000..455353908bd
--- /dev/null
+++ b/drivers/input/touchscreen/dynapro.c
@@ -0,0 +1,206 @@
+/*
+ * Dynapro serial touchscreen driver
+ *
+ * Copyright (c) 2009 Tias Guns
+ * Based on the inexio driver (c) Vojtech Pavlik and Dan Streetman and
+ * Richard Lemon
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2009/09/19 Tias Guns <tias@ulyssis.org>
+ *   Copied inexio.c and edited for Dynapro protocol (from retired Xorg module)
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Dynapro serial touchscreen driver"
+
+MODULE_AUTHOR("Tias Guns <tias@ulyssis.org>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define DYNAPRO_FORMAT_TOUCH_BIT 0x40
+#define DYNAPRO_FORMAT_LENGTH 3
+#define DYNAPRO_RESPONSE_BEGIN_BYTE 0x80
+
+#define DYNAPRO_MIN_XC 0
+#define DYNAPRO_MAX_XC 0x3ff
+#define DYNAPRO_MIN_YC 0
+#define DYNAPRO_MAX_YC 0x3ff
+
+#define DYNAPRO_GET_XC(data) (data[1] | ((data[0] & 0x38) << 4))
+#define DYNAPRO_GET_YC(data) (data[2] | ((data[0] & 0x07) << 7))
+#define DYNAPRO_GET_TOUCHED(data) (DYNAPRO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct dynapro {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[DYNAPRO_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void dynapro_process_data(struct dynapro *pdynapro)
+{
+	struct input_dev *dev = pdynapro->dev;
+
+	if (DYNAPRO_FORMAT_LENGTH == ++pdynapro->idx) {
+		input_report_abs(dev, ABS_X, DYNAPRO_GET_XC(pdynapro->data));
+		input_report_abs(dev, ABS_Y, DYNAPRO_GET_YC(pdynapro->data));
+		input_report_key(dev, BTN_TOUCH,
+				 DYNAPRO_GET_TOUCHED(pdynapro->data));
+		input_sync(dev);
+
+		pdynapro->idx = 0;
+	}
+}
+
+static irqreturn_t dynapro_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+	pdynapro->data[pdynapro->idx] = data;
+
+	if (DYNAPRO_RESPONSE_BEGIN_BYTE & pdynapro->data[0])
+		dynapro_process_data(pdynapro);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			pdynapro->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void dynapro_disconnect(struct serio *serio)
+{
+	struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+	input_get_device(pdynapro->dev);
+	input_unregister_device(pdynapro->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pdynapro->dev);
+	kfree(pdynapro);
+}
+
+/*
+ * dynapro_connect() is the routine that is called when someone adds a
+ * new serio device that supports dynapro protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int dynapro_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct dynapro *pdynapro;
+	struct input_dev *input_dev;
+	int err;
+
+	pdynapro = kzalloc(sizeof(struct dynapro), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pdynapro || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pdynapro->serio = serio;
+	pdynapro->dev = input_dev;
+	snprintf(pdynapro->phys, sizeof(pdynapro->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Dynapro Serial TouchScreen";
+	input_dev->phys = pdynapro->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_DYNAPRO;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(pdynapro->dev, ABS_X,
+			     DYNAPRO_MIN_XC, DYNAPRO_MAX_XC, 0, 0);
+	input_set_abs_params(pdynapro->dev, ABS_Y,
+			     DYNAPRO_MIN_YC, DYNAPRO_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, pdynapro);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pdynapro->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pdynapro);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id dynapro_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_DYNAPRO,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, dynapro_serio_ids);
+
+static struct serio_driver dynapro_drv = {
+	.driver		= {
+		.name	= "dynapro",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= dynapro_serio_ids,
+	.interrupt	= dynapro_interrupt,
+	.connect	= dynapro_connect,
+	.disconnect	= dynapro_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init dynapro_init(void)
+{
+	return serio_register_driver(&dynapro_drv);
+}
+
+static void __exit dynapro_exit(void)
+{
+	serio_unregister_driver(&dynapro_drv);
+}
+
+module_init(dynapro_init);
+module_exit(dynapro_exit);
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 00000000000..6386b441ef8
--- /dev/null
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,457 @@
+/*
+ * Samsung S3C24XX touchscreen driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the term of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Copyright 2008 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * Additional work by Herbert Pötzl <herbert@13thfloor.at> and
+ * Harald Welte <laforge@openmoko.org>
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/adc.h>
+#include <plat/regs-adc.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/ts.h>
+
+#define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
+
+#define INT_DOWN	(0)
+#define INT_UP		(1 << 8)
+
+#define WAIT4INT	(S3C2410_ADCTSC_YM_SEN | \
+			 S3C2410_ADCTSC_YP_SEN | \
+			 S3C2410_ADCTSC_XP_SEN | \
+			 S3C2410_ADCTSC_XY_PST(3))
+
+#define AUTOPST		(S3C2410_ADCTSC_YM_SEN | \
+			 S3C2410_ADCTSC_YP_SEN | \
+			 S3C2410_ADCTSC_XP_SEN | \
+			 S3C2410_ADCTSC_AUTO_PST | \
+			 S3C2410_ADCTSC_XY_PST(0))
+
+/* Per-touchscreen data. */
+
+/**
+ * struct s3c2410ts - driver touchscreen state.
+ * @client: The ADC client we registered with the core driver.
+ * @dev: The device we are bound to.
+ * @input: The input device we registered with the input subsystem.
+ * @clock: The clock for the adc.
+ * @io: Pointer to the IO base.
+ * @xp: The accumulated X position data.
+ * @yp: The accumulated Y position data.
+ * @irq_tc: The interrupt number for pen up/down interrupt
+ * @count: The number of samples collected.
+ * @shift: The log2 of the maximum count to read in one go.
+ */
+struct s3c2410ts {
+	struct s3c_adc_client *client;
+	struct device *dev;
+	struct input_dev *input;
+	struct clk *clock;
+	void __iomem *io;
+	unsigned long xp;
+	unsigned long yp;
+	int irq_tc;
+	int count;
+	int shift;
+};
+
+static struct s3c2410ts ts;
+
+/**
+ * s3c2410_ts_connect - configure gpio for s3c2410 systems
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+*/
+static inline void s3c2410_ts_connect(void)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
+
+/**
+ * get_down - return the down state of the pen
+ * @data0: The data read from ADCDAT0 register.
+ * @data1: The data read from ADCDAT1 register.
+ *
+ * Return non-zero if both readings show that the pen is down.
+ */
+static inline bool get_down(unsigned long data0, unsigned long data1)
+{
+	/* returns true if both data values show stylus down */
+	return (!(data0 & S3C2410_ADCDAT0_UPDOWN) &&
+		!(data1 & S3C2410_ADCDAT0_UPDOWN));
+}
+
+static void touch_timer_fire(unsigned long data)
+{
+	unsigned long data0;
+	unsigned long data1;
+	bool down;
+
+	data0 = readl(ts.io + S3C2410_ADCDAT0);
+	data1 = readl(ts.io + S3C2410_ADCDAT1);
+
+	down = get_down(data0, data1);
+
+	if (ts.count == (1 << ts.shift)) {
+		ts.xp >>= ts.shift;
+		ts.yp >>= ts.shift;
+
+		dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
+			__func__, ts.xp, ts.yp, ts.count);
+
+		input_report_abs(ts.input, ABS_X, ts.xp);
+		input_report_abs(ts.input, ABS_Y, ts.yp);
+
+		input_report_key(ts.input, BTN_TOUCH, 1);
+		input_sync(ts.input);
+
+		ts.xp = 0;
+		ts.yp = 0;
+		ts.count = 0;
+	}
+
+	if (down) {
+		s3c_adc_start(ts.client, 0, 1 << ts.shift);
+	} else {
+		ts.count = 0;
+
+		input_report_key(ts.input, BTN_TOUCH, 0);
+		input_sync(ts.input);
+
+		writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+	}
+}
+
+static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0);
+
+/**
+ * stylus_irq - touchscreen stylus event interrupt
+ * @irq: The interrupt number
+ * @dev_id: The device ID.
+ *
+ * Called when the IRQ_TC is fired for a pen up or down event.
+ */
+static irqreturn_t stylus_irq(int irq, void *dev_id)
+{
+	unsigned long data0;
+	unsigned long data1;
+	bool down;
+
+	data0 = readl(ts.io + S3C2410_ADCDAT0);
+	data1 = readl(ts.io + S3C2410_ADCDAT1);
+
+	down = get_down(data0, data1);
+
+	/* TODO we should never get an interrupt with down set while
+	 * the timer is running, but maybe we ought to verify that the
+	 * timer isn't running anyways. */
+
+	if (down)
+		s3c_adc_start(ts.client, 0, 1 << ts.shift);
+	else
+		dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * s3c24xx_ts_conversion - ADC conversion callback
+ * @client: The client that was registered with the ADC core.
+ * @data0: The reading from ADCDAT0.
+ * @data1: The reading from ADCDAT1.
+ * @left: The number of samples left.
+ *
+ * Called when a conversion has finished.
+ */
+static void s3c24xx_ts_conversion(struct s3c_adc_client *client,
+				  unsigned data0, unsigned data1,
+				  unsigned *left)
+{
+	dev_dbg(ts.dev, "%s: %d,%d\n", __func__, data0, data1);
+
+	ts.xp += data0;
+	ts.yp += data1;
+
+	ts.count++;
+
+	/* From tests, it seems that it is unlikely to get a pen-up
+	 * event during the conversion process which means we can
+	 * ignore any pen-up events with less than the requisite
+	 * count done.
+	 *
+	 * In several thousand conversions, no pen-ups where detected
+	 * before count completed.
+	 */
+}
+
+/**
+ * s3c24xx_ts_select - ADC selection callback.
+ * @client: The client that was registered with the ADC core.
+ * @select: The reason for select.
+ *
+ * Called when the ADC core selects (or deslects) us as a client.
+ */
+static void s3c24xx_ts_select(struct s3c_adc_client *client, unsigned select)
+{
+	if (select) {
+		writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+		       ts.io + S3C2410_ADCTSC);
+	} else {
+		mod_timer(&touch_timer, jiffies+1);
+		writel(WAIT4INT | INT_UP, ts.io + S3C2410_ADCTSC);
+	}
+}
+
+/**
+ * s3c2410ts_probe - device core probe entry point
+ * @pdev: The device we are being bound to.
+ *
+ * Initialise, find and allocate any resources we need to run and then
+ * register with the ADC and input systems.
+ */
+static int __devinit s3c2410ts_probe(struct platform_device *pdev)
+{
+	struct s3c2410_ts_mach_info *info;
+	struct device *dev = &pdev->dev;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int ret = -EINVAL;
+
+	/* Initialise input stuff */
+	memset(&ts, 0, sizeof(struct s3c2410ts));
+
+	ts.dev = dev;
+
+	info = pdev->dev.platform_data;
+	if (!info) {
+		dev_err(dev, "no platform data, cannot attach\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "initialising touchscreen\n");
+
+	ts.clock = clk_get(dev, "adc");
+	if (IS_ERR(ts.clock)) {
+		dev_err(dev, "cannot get adc clock source\n");
+		return -ENOENT;
+	}
+
+	clk_enable(ts.clock);
+	dev_dbg(dev, "got and enabled clocks\n");
+
+	ts.irq_tc = ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "no resource for interrupt\n");
+		goto err_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no resource for registers\n");
+		ret = -ENOENT;
+		goto err_clk;
+	}
+
+	ts.io = ioremap(res->start, resource_size(res));
+	if (ts.io == NULL) {
+		dev_err(dev, "cannot map registers\n");
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+
+	/* Configure the touchscreen external FETs on the S3C2410 */
+	if (!platform_get_device_id(pdev)->driver_data)
+		s3c2410_ts_connect();
+
+	ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,
+				     s3c24xx_ts_conversion, 1);
+	if (IS_ERR(ts.client)) {
+		dev_err(dev, "failed to register adc client\n");
+		ret = PTR_ERR(ts.client);
+		goto err_iomap;
+	}
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);
+
+	writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(dev, "Unable to allocate the input device !!\n");
+		ret = -ENOMEM;
+		goto err_iomap;
+	}
+
+	ts.input = input_dev;
+	ts.input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0);
+
+	ts.input->name = "S3C24XX TouchScreen";
+	ts.input->id.bustype = BUS_HOST;
+	ts.input->id.vendor = 0xDEAD;
+	ts.input->id.product = 0xBEEF;
+	ts.input->id.version = 0x0102;
+
+	ts.shift = info->oversampling_shift;
+
+	ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,
+			  "s3c2410_ts_pen", ts.input);
+	if (ret) {
+		dev_err(dev, "cannot get TC interrupt\n");
+		goto err_inputdev;
+	}
+
+	dev_info(dev, "driver attached, registering input device\n");
+
+	/* All went ok, so register to the input system */
+	ret = input_register_device(ts.input);
+	if (ret < 0) {
+		dev_err(dev, "failed to register input device\n");
+		ret = -EIO;
+		goto err_tcirq;
+	}
+
+	return 0;
+
+ err_tcirq:
+	free_irq(ts.irq_tc, ts.input);
+ err_inputdev:
+	input_unregister_device(ts.input);
+ err_iomap:
+	iounmap(ts.io);
+ err_clk:
+	del_timer_sync(&touch_timer);
+	clk_put(ts.clock);
+	return ret;
+}
+
+/**
+ * s3c2410ts_remove - device core removal entry point
+ * @pdev: The device we are being removed from.
+ *
+ * Free up our state ready to be removed.
+ */
+static int __devexit s3c2410ts_remove(struct platform_device *pdev)
+{
+	free_irq(ts.irq_tc, ts.input);
+	del_timer_sync(&touch_timer);
+
+	clk_disable(ts.clock);
+	clk_put(ts.clock);
+
+	input_unregister_device(ts.input);
+	iounmap(ts.io);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c2410ts_suspend(struct device *dev)
+{
+	writel(TSC_SLEEP, ts.io + S3C2410_ADCTSC);
+	disable_irq(ts.irq_tc);
+	clk_disable(ts.clock);
+
+	return 0;
+}
+
+static int s3c2410ts_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c2410_ts_mach_info *info = pdev->dev.platform_data;
+
+	clk_enable(ts.clock);
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);
+
+	writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+
+	return 0;
+}
+
+static struct dev_pm_ops s3c_ts_pmops = {
+	.suspend	= s3c2410ts_suspend,
+	.resume		= s3c2410ts_resume,
+};
+#endif
+
+static struct platform_device_id s3cts_driver_ids[] = {
+	{ "s3c2410-ts", 0 },
+	{ "s3c2440-ts", 1 },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);
+
+static struct platform_driver s3c_ts_driver = {
+	.driver         = {
+		.name   = "s3c24xx-ts",
+		.owner  = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &s3c_ts_pmops,
+#endif
+	},
+	.id_table	= s3cts_driver_ids,
+	.probe		= s3c2410ts_probe,
+	.remove		= __devexit_p(s3c2410ts_remove),
+};
+
+static int __init s3c2410ts_init(void)
+{
+	return platform_driver_register(&s3c_ts_driver);
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+	platform_driver_unregister(&s3c_ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "
+	      "Ben Dooks <ben@simtec.co.uk>, "
+	      "Simtec Electronics <linux@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C24XX Touchscreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 095f84b1f56..89dcbe7b4b0 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -355,10 +355,13 @@ static int ucb1400_ts_probe(struct platform_device *dev)
 		goto err;
 	}
 
-	error = ucb1400_ts_detect_irq(ucb);
-	if (error) {
-		printk(KERN_ERR "UCB1400: IRQ probe failed\n");
-		goto err_free_devs;
+	/* Only in case the IRQ line wasn't supplied, try detecting it */
+	if (ucb->irq < 0) {
+		error = ucb1400_ts_detect_irq(ucb);
+		if (error) {
+			printk(KERN_ERR "UCB1400: IRQ probe failed\n");
+			goto err_free_devs;
+		}
 	}
 
 	init_waitqueue_head(&ucb->ts_wait);
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 68ece5801a5..09a5e7341bd 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -14,6 +14,7 @@
  *  - General Touch
  *  - GoTop Super_Q2/GogoPen/PenPower tablets
  *  - JASTEC USB touch controller/DigiTech DTR-02U
+ *  - Zytronic capacitive touchscreen
  *
  * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -73,6 +74,15 @@ struct usbtouch_device_info {
 	int min_press, max_press;
 	int rept_size;
 
+	/*
+	 * Always service the USB devices irq not just when the input device is
+	 * open. This is useful when devices have a watchdog which prevents us
+	 * from periodically polling the device. Leave this unset unless your
+	 * touchscreen device requires it, as it does consume more of the USB
+	 * bandwidth.
+	 */
+	bool irq_always;
+
 	void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
 
 	/*
@@ -121,6 +131,8 @@ enum {
 	DEVTYPE_GOTOP,
 	DEVTYPE_JASTEC,
 	DEVTYPE_E2I,
+	DEVTYPE_ZYTRONIC,
+	DEVTYPE_TC5UH,
 };
 
 #define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -201,6 +213,15 @@ static struct usb_device_id usbtouch_devices[] = {
 #ifdef CONFIG_TOUCHSCREEN_USB_E2I
 	{USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},
 #endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+	{USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+	{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
+#endif
+
 	{}
 };
 
@@ -538,6 +559,19 @@ static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 }
 #endif
 
+/*****************************************************************************
+ * ET&T TC5UH part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
 
 /*****************************************************************************
  * IdealTEK URTC1000 Part
@@ -621,6 +655,39 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 }
 #endif
 
+/*****************************************************************************
+ * Zytronic Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	switch (pkt[0]) {
+	case 0x3A: /* command response */
+		dbg("%s: Command response %d", __func__, pkt[1]);
+		break;
+
+	case 0xC0: /* down */
+		dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+		dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+		dev->touch = 1;
+		dbg("%s: down %d,%d", __func__, dev->x, dev->y);
+		return 1;
+
+	case 0x80: /* up */
+		dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+		dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+		dev->touch = 0;
+		dbg("%s: up %d,%d", __func__, dev->x, dev->y);
+		return 1;
+
+	default:
+		dbg("%s: Unknown return %d", __func__, pkt[0]);
+		break;
+	}
+
+	return 0;
+}
+#endif
 
 /*****************************************************************************
  * the different device descriptors
@@ -783,6 +850,29 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.read_data	= e2i_read_data,
 	},
 #endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+	[DEVTYPE_ZYTRONIC] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x03ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x03ff,
+		.rept_size	= 5,
+		.read_data	= zytronic_read_data,
+		.irq_always     = true,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+	[DEVTYPE_TC5UH] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 5,
+		.read_data	= tc5uh_read_data,
+	},
+#endif
 };
 
 
@@ -933,8 +1023,10 @@ static int usbtouch_open(struct input_dev *input)
 
 	usbtouch->irq->dev = usbtouch->udev;
 
-	if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
-		return -EIO;
+	if (!usbtouch->type->irq_always) {
+		if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+		  return -EIO;
+	}
 
 	return 0;
 }
@@ -943,7 +1035,8 @@ static void usbtouch_close(struct input_dev *input)
 {
 	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
 
-	usb_kill_urb(usbtouch->irq);
+	if (!usbtouch->type->irq_always)
+		usb_kill_urb(usbtouch->irq);
 }
 
 
@@ -1066,6 +1159,9 @@ static int usbtouch_probe(struct usb_interface *intf,
 
 	usb_set_intfdata(intf, usbtouch);
 
+	if (usbtouch->type->irq_always)
+		usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+
 	return 0;
 
 out_free_buffers:
@@ -1087,7 +1183,7 @@ static void usbtouch_disconnect(struct usb_interface *intf)
 
 	dbg("%s - usbtouch is initialized, cleaning up", __func__);
 	usb_set_intfdata(intf, NULL);
-	usb_kill_urb(usbtouch->irq);
+	/* this will stop IO via close */
 	input_unregister_device(usbtouch->input);
 	usb_free_urb(usbtouch->irq);
 	usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index fa294b6d600..85fd9421be9 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -51,6 +51,7 @@ static int ucb1400_core_probe(struct device *dev)
 	struct ucb1400_ts ucb_ts;
 	struct ucb1400_gpio ucb_gpio;
 	struct snd_ac97 *ac97;
+	struct ucb1400_pdata *pdata = dev->platform_data;
 
 	memset(&ucb_ts, 0, sizeof(ucb_ts));
 	memset(&ucb_gpio, 0, sizeof(ucb_gpio));
@@ -88,6 +89,12 @@ static int ucb1400_core_probe(struct device *dev)
 
 	/* TOUCHSCREEN */
 	ucb_ts.ac97 = ac97;
+
+	if (pdata != NULL && pdata->irq >= 0)
+		ucb_ts.irq = pdata->irq;
+	else
+		ucb_ts.irq = -1;
+
 	ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1);
 	if (!ucb->ucb1400_ts) {
 		err = -ENOMEM;
diff --git a/include/linux/input-polldev.h b/include/linux/input-polldev.h
index 597a0077b3c..5e3dddf8f56 100644
--- a/include/linux/input-polldev.h
+++ b/include/linux/input-polldev.h
@@ -14,12 +14,19 @@
 
 /**
  * struct input_polled_dev - simple polled input device
- * @private: private driver data
- * @flush: driver-supplied method that flushes device's state upon
- *	opening (optional)
+ * @private: private driver data.
+ * @open: driver-supplied method that prepares device for polling
+ *	(enabled the device and maybe flushes device state).
+ * @close: driver-supplied method that is called when device is no
+ *	longer being polled. Used to put device into low power mode.
  * @poll: driver-supplied method that polls the device and posts
  *	input events (mandatory).
- * @poll_interval: specifies how often the poll() method shoudl be called.
+ * @poll_interval: specifies how often the poll() method should be called.
+ *	Defaults to 500 msec unless overriden when registering the device.
+ * @poll_interval_max: specifies upper bound for the poll interval.
+ *	Defaults to the initial value of @poll_interval.
+ * @poll_interval_min: specifies lower bound for the poll interval.
+ *	Defaults to 0.
  * @input: input device structire associated with the polled device.
  *	Must be properly initialized by the driver (id, name, phys, bits).
  *
@@ -30,11 +37,16 @@
 struct input_polled_dev {
 	void *private;
 
-	void (*flush)(struct input_polled_dev *dev);
+	void (*open)(struct input_polled_dev *dev);
+	void (*close)(struct input_polled_dev *dev);
 	void (*poll)(struct input_polled_dev *dev);
 	unsigned int poll_interval; /* msec */
+	unsigned int poll_interval_max; /* msec */
+	unsigned int poll_interval_min; /* msec */
 
 	struct input_dev *input;
+
+/* private: */
 	struct delayed_work work;
 };
 
diff --git a/include/linux/input.h b/include/linux/input.h
index 84b501ab0d8..7be8a6537b5 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -895,7 +895,7 @@ struct ff_periodic_effect {
 	struct ff_envelope envelope;
 
 	__u32 custom_len;
-	__s16 *custom_data;
+	__s16 __user *custom_data;
 };
 
 /**
@@ -1021,9 +1021,12 @@ struct ff_effect {
  * @keycodesize: size of elements in keycode table
  * @keycode: map of scancodes to keycodes for this device
  * @setkeycode: optional method to alter current keymap, used to implement
- *	sparse keymaps. If not supplied default mechanism will be used
+ *	sparse keymaps. If not supplied default mechanism will be used.
+ *	The method is being called while holding event_lock and thus must
+ *	not sleep
  * @getkeycode: optional method to retrieve current keymap. If not supplied
- *	default mechanism will be used
+ *	default mechanism will be used. The method is being called while
+ *	holding event_lock and thus must not sleep
  * @ff: force feedback structure associated with the device if device
  *	supports force feedback effects
  * @repeat_key: stores key code of the last key pressed; used to implement
@@ -1040,6 +1043,7 @@ struct ff_effect {
  * @absmin: minimum values for events coming from absolute axes
  * @absfuzz: describes noisiness for axes
  * @absflat: size of the center flat position (used by joydev)
+ * @absres: resolution used for events coming form absolute axes
  * @open: this method is called when the very first user calls
  *	input_open_device(). The driver must prepare the device
  *	to start generating events (start polling thread,
@@ -1294,6 +1298,9 @@ void input_unregister_device(struct input_dev *);
 int __must_check input_register_handler(struct input_handler *);
 void input_unregister_handler(struct input_handler *);
 
+int input_handler_for_each_handle(struct input_handler *, void *data,
+				  int (*fn)(struct input_handle *, void *));
+
 int input_register_handle(struct input_handle *);
 void input_unregister_handle(struct input_handle *);
 
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index b3cd42d50e1..3bd018baae2 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -41,6 +41,9 @@ struct matrix_keymap_data {
  * @col_scan_delay_us: delay, measured in microseconds, that is
  *	needed before we can keypad after activating column gpio
  * @debounce_ms: debounce interval in milliseconds
+ * @active_low: gpio polarity
+ * @wakeup: controls whether the device should be set up as wakeup
+ *	source
  *
  * This structure represents platform-specific data that use used by
  * matrix_keypad driver to perform proper initialization.
diff --git a/include/linux/input/sparse-keymap.h b/include/linux/input/sparse-keymap.h
new file mode 100644
index 00000000000..52db62064c6
--- /dev/null
+++ b/include/linux/input/sparse-keymap.h
@@ -0,0 +1,62 @@
+#ifndef _SPARSE_KEYMAP_H
+#define _SPARSE_KEYMAP_H
+
+/*
+ * Copyright (c) 2009 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#define KE_END		0	/* Indicates end of keymap */
+#define KE_KEY		1	/* Ordinary key/button */
+#define KE_SW		2	/* Switch (predetermined value) */
+#define KE_VSW		3	/* Switch (value supplied at runtime) */
+#define KE_IGNORE	4	/* Known entry that should be ignored */
+#define KE_LAST		KE_IGNORE
+
+/**
+ * struct key_entry - keymap entry for use in sparse keymap
+ * @type: Type of the key entry (KE_KEY, KE_SW, KE_VSW, KE_END);
+ *	drivers are allowed to extend the list with their own
+ *	private definitions.
+ * @code: Device-specific data identifying the button/switch
+ * @keycode: KEY_* code assigned to a key/button
+ * @sw.code: SW_* code assigned to a switch
+ * @sw.value: Value that should be sent in an input even when KE_SW
+ *	switch is toggled. KE_VSW switches ignore this field and
+ *	expect driver to supply value for the event.
+ *
+ * This structure defines an entry in a sparse keymap used by some
+ * input devices for which traditional table-based approach is not
+ * suitable.
+ */
+struct key_entry {
+	int type;		/* See KE_* above */
+	u32 code;
+	union {
+		u16 keycode;		/* For KE_KEY */
+		struct {		/* For KE_SW, KE_VSW */
+			u8 code;
+			u8 value;	/* For KE_SW, ignored by KE_VSW */
+		} sw;
+	};
+};
+
+struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
+						    unsigned int code);
+struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
+						   unsigned int code);
+int sparse_keymap_setup(struct input_dev *dev,
+			const struct key_entry *keymap,
+			int (*setup)(struct input_dev *, struct key_entry *));
+void sparse_keymap_free(struct input_dev *dev);
+
+void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
+				unsigned int value, bool autorelease);
+
+bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
+				unsigned int value, bool autorelease);
+
+#endif /* _SPARSE_KEYMAP_H */
diff --git a/include/linux/serio.h b/include/linux/serio.h
index a640bc2afe7..e2f3044d4a4 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -215,5 +215,6 @@ static inline void serio_unpin_driver(struct serio *serio)
 #define SERIO_INEXIO	0x37
 #define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
+#define SERIO_DYNAPRO	0x3a
 
 #endif
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index adb44066680..1b479091105 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -110,6 +110,10 @@ struct ucb1400 {
 	struct platform_device	*ucb1400_gpio;
 };
 
+struct ucb1400_pdata {
+	int	irq;
+};
+
 static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
 {
 	return ac97->bus->ops->read(ac97, reg);