Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits)
  leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
  leds: 88pm860x: Add missing of_node_put()
  leds: tca6507: Use of_get_child_count()
  leds: leds-pwm: make it depend on PWM and not HAVE_PWM
  Documentation: leds: update LP55xx family devices
  leds-lp55xx: fix problem on removing LED attributes
  leds-lp5521/5523: add author and copyright description
  leds-lp5521/5523: use new lp55xx common header
  leds-lp55xx: clean up headers
  leds-lp55xx: clean up definitions
  leds-lp55xx: clean up unused data and functions
  leds-lp55xx: clean up _remove()
  leds-lp55xx: add new function for removing device attribtues
  leds-lp55xx: code refactoring on selftest function
  leds-lp55xx: use common device attribute driver function
  leds-lp55xx: support device specific attributes
  leds-lp5523: use generic firmware interface
  leds-lp5521: use generic firmware interface
  leds-lp55xx: support firmware interface
  leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
  ...

32 files changed, 1803 insertions, 1787 deletions

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
new file mode 100644
index 00000000000..7297107cf83
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt
@@ -0,0 +1,48 @@
+LED connected to PWM
+
+Required properties:
+- compatible : should be "pwm-leds".
+
+Each LED is represented as a sub-node of the pwm-leds device.  Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
+  specify the period time to be used: <&phandle id period_ns>;
+- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
+  For the pwms and pwm-names property please refer to:
+  Documentation/devicetree/bindings/pwm/pwm.txt
+- max-brightness : Maximum brightness possible for the LED
+- label :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger :  (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+twl_pwm: pwm {
+	/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+	compatible = "ti,twl6030-pwm";
+	#pwm-cells = <2>;
+};
+
+twl_pwmled: pwmled {
+	/* provides one PWM (id 0 for Charing indicator LED) */
+	compatible = "ti,twl6030-pwmled";
+	#pwm-cells = <2>;
+};
+
+pwmleds {
+	compatible = "pwm-leds";
+	kpad {
+		label = "omap4::keypad";
+		pwms = <&twl_pwm 0 7812500>;
+		max-brightness = <127>;
+	};
+
+	charging {
+		label = "omap4:green:chrg";
+		pwms = <&twl_pwmled 0 7812500>;
+		max-brightness = <255>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt
new file mode 100644
index 00000000000..2b6693b972f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/tca6507.txt
@@ -0,0 +1,33 @@
+LEDs conected to tca6507
+
+Required properties:
+- compatible : should be : "ti,tca6507".
+
+Each led is represented as a sub-node of the ti,tca6507 device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 6)
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+tca6507@45 {
+	compatible = "ti,tca6507";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x45>;
+
+	led0: red-aux@0 {
+		label = "red:aux";
+		reg = <0x0>;
+	};
+
+	led1: green-aux@1 {
+		label = "green:aux";
+		reg = <0x5>;
+		linux,default-trigger = "default-on";
+	};
+};
+
diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX
index 5fefe374892..5246090ef15 100644
--- a/Documentation/leds/00-INDEX
+++ b/Documentation/leds/00-INDEX
@@ -6,5 +6,7 @@ leds-lp5521.txt
 	- notes on how to use the leds-lp5521 driver.
 leds-lp5523.txt
 	- notes on how to use the leds-lp5523 driver.
+leds-lp55xx.txt
+	- description about lp55xx common driver.
 leds-lm3556.txt
 	- notes on how to use the leds-lm3556 driver.
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
index 0e542ab3d4a..270f5719633 100644
--- a/Documentation/leds/leds-lp5521.txt
+++ b/Documentation/leds/leds-lp5521.txt
@@ -17,19 +17,8 @@ lp5521:channelx, where x is 0 .. 2
 All three channels can be also controlled using the engine micro programs.
 More details of the instructions can be found from the public data sheet.
 
-Control interface for the engines:
-x is 1 .. 3
-enginex_mode : disabled, load, run
-enginex_load : store program (visible only in engine load mode)
-
-Example (start to blink the channel 2 led):
-cd   /sys/class/leds/lp5521:channel2/device
-echo "load" > engine3_mode
-echo "037f4d0003ff6000" > engine3_load
-echo "run" > engine3_mode
-
-stop the engine:
-echo "disabled" > engine3_mode
+LP5521 has the internal program memory for running various LED patterns.
+For the details, please refer to 'firmware' section in leds-lp55xx.txt
 
 sysfs contains a selftest entry.
 The test communicates with the chip and checks that
@@ -47,7 +36,7 @@ The name of each channel can be configurable.
 If the name field is not defined, the default name will be set to 'xxxx:channelN'
 (XXXX : pdata->label or i2c client name, N : channel number)
 
-static struct lp5521_led_config lp5521_led_config[] = {
+static struct lp55xx_led_config lp5521_led_config[] = {
         {
 		.name = "red",
                 .chan_nr        = 0,
@@ -81,10 +70,10 @@ static void lp5521_enable(bool state)
 	/* Control of chip enable signal */
 }
 
-static struct lp5521_platform_data lp5521_platform_data = {
+static struct lp55xx_platform_data lp5521_platform_data = {
         .led_config     = lp5521_led_config,
         .num_channels   = ARRAY_SIZE(lp5521_led_config),
-        .clock_mode     = LP5521_CLOCK_EXT,
+        .clock_mode     = LP55XX_CLOCK_EXT,
         .setup_resources   = lp5521_setup,
         .release_resources = lp5521_release,
         .enable            = lp5521_enable,
@@ -105,47 +94,9 @@ example of update_config :
 			LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \
 			LP5521_CLK_INT)
 
-static struct lp5521_platform_data lp5521_pdata = {
+static struct lp55xx_platform_data lp5521_pdata = {
 	.led_config = lp5521_led_config,
 	.num_channels = ARRAY_SIZE(lp5521_led_config),
-	.clock_mode = LP5521_CLOCK_INT,
+	.clock_mode = LP55XX_CLOCK_INT,
 	.update_config = LP5521_CONFIGS,
 };
-
-LED patterns : LP5521 has autonomous operation without external control.
-Pattern data can be defined in the platform data.
-
-example of led pattern data :
-
-/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */
-static u8 pattern_red[] = {
-		0x40, 0x32, 0x60, 0x00,	0x40, 0x00, 0x60, 0x00,
-		};
-
-static u8 pattern_green[] = {
-		0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
-		};
-
-static struct lp5521_led_pattern board_led_patterns[] = {
-	{
-		.r = pattern_red,
-		.g = pattern_green,
-		.size_r = ARRAY_SIZE(pattern_red),
-		.size_g = ARRAY_SIZE(pattern_green),
-	},
-};
-
-static struct lp5521_platform_data lp5521_platform_data = {
-        .led_config     = lp5521_led_config,
-        .num_channels   = ARRAY_SIZE(lp5521_led_config),
-        .clock_mode     = LP5521_CLOCK_EXT,
-	.patterns = board_led_patterns,
-	.num_patterns = ARRAY_SIZE(board_led_patterns),
-};
-
-Then predefined led pattern(s) can be executed via the sysfs.
-To start the pattern #1,
-# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern
-(xxxx : i2c bus & slave address)
-To end the pattern,
-# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
index c2743f59f9a..899fdad509f 100644
--- a/Documentation/leds/leds-lp5523.txt
+++ b/Documentation/leds/leds-lp5523.txt
@@ -27,25 +27,8 @@ c) Default
 If both fields are NULL, 'lp5523' is used by default.
 /sys/class/leds/lp5523:channelN  (N: 0 ~ 8)
 
-The chip provides 3 engines. Each engine can control channels without
-interaction from the main CPU. Details of the micro engine code can be found
-from the public data sheet. Leds can be muxed to different channels.
-
-Control interface for the engines:
-x is 1 .. 3
-enginex_mode : disabled, load, run
-enginex_load : microcode load (visible only in load mode)
-enginex_leds : led mux control (visible only in load mode)
-
-cd /sys/class/leds/lp5523:channel2/device
-echo "load" > engine3_mode
-echo "9d80400004ff05ff437f0000" > engine3_load
-echo "111111111" > engine3_leds
-echo "run" > engine3_mode
-
-sysfs contains a selftest entry. It measures each channel
-voltage level and checks if it looks reasonable. If the level is too high,
-the led is missing; if the level is too low, there is a short circuit.
+LP5523 has the internal program memory for running various LED patterns.
+For the details, please refer to 'firmware' section in leds-lp55xx.txt
 
 Selftest uses always the current from the platform data.
 
@@ -58,7 +41,7 @@ Example platform data:
 
 Note - chan_nr can have values between 0 and 8.
 
-static struct lp5523_led_config lp5523_led_config[] = {
+static struct lp55xx_led_config lp5523_led_config[] = {
         {
 		.name		= "D1",
                 .chan_nr        = 0,
@@ -88,10 +71,10 @@ static void lp5523_enable(bool state)
 	/* Control chip enable signal */
 }
 
-static struct lp5523_platform_data lp5523_platform_data = {
+static struct lp55xx_platform_data lp5523_platform_data = {
         .led_config     = lp5523_led_config,
         .num_channels   = ARRAY_SIZE(lp5523_led_config),
-        .clock_mode     = LP5523_CLOCK_EXT,
+        .clock_mode     = LP55XX_CLOCK_EXT,
         .setup_resources   = lp5523_setup,
         .release_resources = lp5523_release,
         .enable            = lp5523_enable,
diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt
new file mode 100644
index 00000000000..ced41868d2d
--- /dev/null
+++ b/Documentation/leds/leds-lp55xx.txt
@@ -0,0 +1,118 @@
+LP5521/LP5523/LP55231 Common Driver
+===================================
+
+Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+LP5521, LP5523/55231 have common features as below.
+
+  Register access via the I2C
+  Device initialization/deinitialization
+  Create LED class devices for multiple output channels
+  Device attributes for user-space interface
+  Program memory for running LED patterns
+
+The LP55xx common driver provides these features using exported functions.
+  lp55xx_init_device() / lp55xx_deinit_device()
+  lp55xx_register_leds() / lp55xx_unregister_leds()
+  lp55xx_regsister_sysfs() / lp55xx_unregister_sysfs()
+
+( Driver Structure Data )
+
+In lp55xx common driver, two different data structure is used.
+
+o lp55xx_led
+  control multi output LED channels such as led current, channel index.
+o lp55xx_chip
+  general chip control such like the I2C and platform data.
+
+For example, LP5521 has maximum 3 LED channels.
+LP5523/55231 has 9 output channels.
+
+lp55xx_chip for LP5521 ... lp55xx_led #1
+                           lp55xx_led #2
+                           lp55xx_led #3
+
+lp55xx_chip for LP5523 ... lp55xx_led #1
+                           lp55xx_led #2
+                                 .
+                                 .
+                           lp55xx_led #9
+
+( Chip Dependent Code )
+
+To support device specific configurations, special structure
+'lpxx_device_config' is used.
+
+  Maximum number of channels
+  Reset command, chip enable command
+  Chip specific initialization
+  Brightness control register access
+  Setting LED output current
+  Program memory address access for running patterns
+  Additional device specific attributes
+
+( Firmware Interface )
+
+LP55xx family devices have the internal program memory for running
+various LED patterns.
+This pattern data is saved as a file in the user-land or
+hex byte string is written into the memory through the I2C.
+LP55xx common driver supports the firmware interface.
+
+LP55xx chips have three program engines.
+To load and run the pattern, the programming sequence is following.
+  (1) Select an engine number (1/2/3)
+  (2) Mode change to load
+  (3) Write pattern data into selected area
+  (4) Mode change to run
+
+The LP55xx common driver provides simple interfaces as below.
+select_engine : Select which engine is used for running program
+run_engine    : Start program which is loaded via the firmware interface
+firmware      : Load program data
+
+For example, run blinking pattern in engine #1 of LP5521
+echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
+echo 1 > /sys/class/firmware/lp5521/loading
+echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
+echo 0 > /sys/class/firmware/lp5521/loading
+echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+For example, run blinking pattern in engine #3 of LP55231
+echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
+echo 1 > /sys/class/firmware/lp55231/loading
+echo "9d0740ff7e0040007e00a0010000" > /sys/class/firmware/lp55231/data
+echo 0 > /sys/class/firmware/lp55231/loading
+echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+To start blinking patterns in engine #2 and #3 simultaneously,
+for idx in 2 3
+do
+  echo $idx > /sys/class/leds/red/device/select_engine
+  sleep 0.1
+  echo 1 > /sys/class/firmware/lp5521/loading
+  echo "4000600040FF6000" > /sys/class/firmware/lp5521/data
+  echo 0 > /sys/class/firmware/lp5521/loading
+done
+echo 1 > /sys/class/leds/red/device/run_engine
+
+Here is another example for LP5523.
+echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
+echo 1 > /sys/class/firmware/lp5523/loading
+echo "9d80400004ff05ff437f0000" > /sys/class/firmware/lp5523/data
+echo 0 > /sys/class/firmware/lp5523/loading
+echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
+
+As soon as 'loading' is set to 0, registered callback is called.
+Inside the callback, the selected engine is loaded and memory is updated.
+To run programmed pattern, 'run_engine' attribute should be enabled.
+
+( 'run_engine' and 'firmware_cb' )
+The sequence of running the program data is common.
+But each device has own specific register addresses for commands.
+To support this, 'run_engine' and 'firmware_cb' are configurable in each driver.
+run_engine  : Control the selected engine
+firmware_cb : The callback function after loading the firmware is done.
+              Chip specific commands for loading and updating program memory.
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index c26d441ca4f..3a077df6b8d 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -40,7 +40,7 @@
 #include <sound/tpa6130a2-plat.h>
 #include <media/radio-si4713.h>
 #include <media/si4713.h>
-#include <linux/leds-lp5523.h>
+#include <linux/platform_data/leds-lp55xx.h>
 
 #include <linux/platform_data/tsl2563.h>
 #include <linux/lis3lv02d.h>
@@ -160,7 +160,7 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
 #endif
 
 #if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-static struct lp5523_led_config rx51_lp5523_led_config[] = {
+static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 	{
 		.name		= "lp5523:kb1",
 		.chan_nr	= 0,
@@ -216,10 +216,10 @@ static void rx51_lp5523_enable(bool state)
 	gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
 }
 
-static struct lp5523_platform_data rx51_lp5523_platform_data = {
+static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 	.led_config		= rx51_lp5523_led_config,
 	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
-	.clock_mode		= LP5523_CLOCK_AUTO,
+	.clock_mode		= LP55XX_CLOCK_AUTO,
 	.setup_resources	= rx51_lp5523_setup,
 	.release_resources	= rx51_lp5523_release,
 	.enable			= rx51_lp5523_enable,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 3868aa4ff15..b03457881c4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -28,7 +28,7 @@
 #include <linux/mfd/tps6105x.h>
 #include <linux/mfd/abx500/ab8500-gpio.h>
 #include <linux/mfd/abx500/ab8500-codec.h>
-#include <linux/leds-lp5521.h>
+#include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio_keys.h>
@@ -301,7 +301,7 @@ static struct tc3589x_platform_data mop500_tc35892_data = {
 	.irq_base	= MOP500_EGPIO_IRQ_BASE,
 };
 
-static struct lp5521_led_config lp5521_pri_led[] = {
+static struct lp55xx_led_config lp5521_pri_led[] = {
        [0] = {
 	       .chan_nr = 0,
 	       .led_current = 0x2f,
@@ -319,14 +319,14 @@ static struct lp5521_led_config lp5521_pri_led[] = {
        },
 };
 
-static struct lp5521_platform_data __initdata lp5521_pri_data = {
+static struct lp55xx_platform_data __initdata lp5521_pri_data = {
        .label = "lp5521_pri",
        .led_config     = &lp5521_pri_led[0],
        .num_channels   = 3,
-       .clock_mode     = LP5521_CLOCK_EXT,
+       .clock_mode     = LP55XX_CLOCK_EXT,
 };
 
-static struct lp5521_led_config lp5521_sec_led[] = {
+static struct lp55xx_led_config lp5521_sec_led[] = {
        [0] = {
 	       .chan_nr = 0,
 	       .led_current = 0x2f,
@@ -344,11 +344,11 @@ static struct lp5521_led_config lp5521_sec_led[] = {
        },
 };
 
-static struct lp5521_platform_data __initdata lp5521_sec_data = {
+static struct lp55xx_platform_data __initdata lp5521_sec_data = {
        .label = "lp5521_sec",
        .led_config     = &lp5521_sec_led[0],
        .num_channels   = 3,
-       .clock_mode     = LP5521_CLOCK_EXT,
+       .clock_mode     = LP55XX_CLOCK_EXT,
 };
 
 static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4469b441b78..ec50824c02e 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -193,9 +193,18 @@ config LEDS_LP3944
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3944.
 
+config LEDS_LP55XX_COMMON
+	tristate "Common Driver for TI/National LP5521 and LP5523/55231"
+	depends on LEDS_LP5521 || LEDS_LP5523
+	select FW_LOADER
+	help
+	  This option supports common operations for LP5521 and LP5523/55231
+	  devices.
+
 config LEDS_LP5521
 	tristate "LED Support for N.S. LP5521 LED driver chip"
 	depends on LEDS_CLASS && I2C
+	select LEDS_LP55XX_COMMON
 	help
 	  If you say yes here you get support for the National Semiconductor
 	  LP5521 LED driver. It is 3 channel chip with programmable engines.
@@ -205,6 +214,7 @@ config LEDS_LP5521
 config LEDS_LP5523
 	tristate "LED Support for TI/National LP5523/55231 LED driver chip"
 	depends on LEDS_CLASS && I2C
+	select LEDS_LP55XX_COMMON
 	help
 	  If you say yes here you get support for TI/National Semiconductor
 	  LP5523/55231 LED driver.
@@ -310,7 +320,7 @@ config LEDS_DAC124S085
 config LEDS_PWM
 	tristate "PWM driven LED Support"
 	depends on LEDS_CLASS
-	depends on HAVE_PWM
+	depends on PWM
 	help
 	  This option enables support for pwm driven LEDs
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 3fb9641b619..215e7e3b617 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
+obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 6be2edd4117..f5b9ea31579 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -128,8 +128,10 @@ static void pm860x_led_set(struct led_classdev *cdev,
 static int pm860x_led_dt_init(struct platform_device *pdev,
 			      struct pm860x_led *data)
 {
-	struct device_node *nproot = pdev->dev.parent->of_node, *np;
+	struct device_node *nproot, *np;
 	int iset = 0;
+
+	nproot = of_node_get(pdev->dev.parent->of_node);
 	if (!nproot)
 		return -ENODEV;
 	nproot = of_find_node_by_name(nproot, "leds");
@@ -145,6 +147,7 @@ static int pm860x_led_dt_init(struct platform_device *pdev,
 			break;
 		}
 	}
+	of_node_put(nproot);
 	return 0;
 }
 #else
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 21414548383..a036a19040f 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -187,6 +187,40 @@ static void lm3530_als_configure(struct lm3530_platform_data *pdata,
 		(pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
 }
 
+static int lm3530_led_enable(struct lm3530_data *drvdata)
+{
+	int ret;
+
+	if (drvdata->enable)
+		return 0;
+
+	ret = regulator_enable(drvdata->regulator);
+	if (ret) {
+		dev_err(drvdata->led_dev.dev, "Failed to enable vin:%d\n", ret);
+		return ret;
+	}
+
+	drvdata->enable = true;
+	return 0;
+}
+
+static void lm3530_led_disable(struct lm3530_data *drvdata)
+{
+	int ret;
+
+	if (!drvdata->enable)
+		return;
+
+	ret = regulator_disable(drvdata->regulator);
+	if (ret) {
+		dev_err(drvdata->led_dev.dev, "Failed to disable vin:%d\n",
+			ret);
+		return;
+	}
+
+	drvdata->enable = false;
+}
+
 static int lm3530_init_registers(struct lm3530_data *drvdata)
 {
 	int ret = 0;
@@ -245,15 +279,9 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	reg_val[12] = LM3530_DEF_ZT_3;	/* LM3530_ALS_Z3T_REG */
 	reg_val[13] = LM3530_DEF_ZT_4;	/* LM3530_ALS_Z4T_REG */
 
-	if (!drvdata->enable) {
-		ret = regulator_enable(drvdata->regulator);
-		if (ret) {
-			dev_err(&drvdata->client->dev,
-					"Enable regulator failed\n");
-			return ret;
-		}
-		drvdata->enable = true;
-	}
+	ret = lm3530_led_enable(drvdata);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < LM3530_REG_MAX; i++) {
 		/* do not update brightness register when pwm mode */
@@ -305,13 +333,8 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,
 		else
 			drvdata->brightness = brt_val;
 
-		if (brt_val == 0) {
-			err = regulator_disable(drvdata->regulator);
-			if (err)
-				dev_err(&drvdata->client->dev,
-					"Disable regulator failed\n");
-			drvdata->enable = false;
-		}
+		if (brt_val == 0)
+			lm3530_led_disable(drvdata);
 		break;
 	case LM3530_BL_MODE_ALS:
 		break;
@@ -458,8 +481,7 @@ static int lm3530_remove(struct i2c_client *client)
 
 	device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
 
-	if (drvdata->enable)
-		regulator_disable(drvdata->regulator);
+	lm3530_led_disable(drvdata);
 	led_classdev_unregister(&drvdata->led_dev);
 	return 0;
 }
diff --git a/drivers/leds/leds-lm355x.c b/drivers/leds/leds-lm355x.c
index 65d79284c48..4117235ba61 100644
--- a/drivers/leds/leds-lm355x.c
+++ b/drivers/leds/leds-lm355x.c
@@ -380,7 +380,7 @@ static void lm355x_indicator_brightness_set(struct led_classdev *cdev,
 
 /* indicator pattern only for lm3556*/
 static ssize_t lm3556_indicator_pattern_store(struct device *dev,
-					      struct device_attribute *devAttr,
+					      struct device_attribute *attr,
 					      const char *buf, size_t size)
 {
 	ssize_t ret;
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index 07b3dde9061..9f428d9dfe9 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -176,7 +176,7 @@ out:
 
 /* torch pin config for lm3642*/
 static ssize_t lm3642_torch_pin_store(struct device *dev,
-				      struct device_attribute *devAttr,
+				      struct device_attribute *attr,
 				      const char *buf, size_t size)
 {
 	ssize_t ret;
@@ -233,7 +233,7 @@ static void lm3642_torch_brightness_set(struct led_classdev *cdev,
 
 /* strobe pin config for lm3642*/
 static ssize_t lm3642_strobe_pin_store(struct device *dev,
-				       struct device_attribute *devAttr,
+				       struct device_attribute *attr,
 				       const char *buf, size_t size)
 {
 	ssize_t ret;
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index cb8a5220200..1001347ba70 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -2,8 +2,10 @@
  * LP5521 LED chip driver.
  *
  * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments
  *
  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *          Milo(Woogyom) Kim <milo.kim@ti.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -20,33 +22,21 @@
  * 02110-1301 USA
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/ctype.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
 #include <linux/leds.h>
-#include <linux/leds-lp5521.h>
-#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
 
-#define LP5521_PROGRAM_LENGTH		32	/* in bytes */
-
-#define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */
-#define LP5521_MAX_ENGINES		3	/* Maximum number of engines */
-
-#define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */
-#define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */
+#include "leds-lp55xx-common.h"
 
-#define LP5521_CMD_LOAD			0x15	/* 00010101 */
-#define LP5521_CMD_RUN			0x2a	/* 00101010 */
-#define LP5521_CMD_DIRECT		0x3f	/* 00111111 */
-#define LP5521_CMD_DISABLED		0x00	/* 00000000 */
+#define LP5521_PROGRAM_LENGTH		32
+#define LP5521_MAX_LEDS			3
+#define LP5521_CMD_DIRECT		0x3F
 
 /* Registers */
 #define LP5521_REG_ENABLE		0x00
@@ -58,22 +48,14 @@
 #define LP5521_REG_G_CURRENT		0x06
 #define LP5521_REG_B_CURRENT		0x07
 #define LP5521_REG_CONFIG		0x08
-#define LP5521_REG_R_CHANNEL_PC		0x09
-#define LP5521_REG_G_CHANNEL_PC		0x0A
-#define LP5521_REG_B_CHANNEL_PC		0x0B
 #define LP5521_REG_STATUS		0x0C
 #define LP5521_REG_RESET		0x0D
-#define LP5521_REG_GPO			0x0E
 #define LP5521_REG_R_PROG_MEM		0x10
 #define LP5521_REG_G_PROG_MEM		0x30
 #define LP5521_REG_B_PROG_MEM		0x50
 
-#define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM
-#define LP5521_PROG_MEM_SIZE		0x20
-
 /* Base register to set LED current */
 #define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT
-
 /* Base register to set the brightness */
 #define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM
 
@@ -92,440 +74,287 @@
 /* default R channel current register value */
 #define LP5521_REG_R_CURR_DEFAULT	0xAF
 
-/* Pattern Mode */
-#define PATTERN_OFF	0
+/* Reset register value */
+#define LP5521_RESET			0xFF
 
-struct lp5521_engine {
-	int		id;
-	u8		mode;
-	u8		prog_page;
-	u8		engine_mask;
-};
+/* Program Memory Operations */
+#define LP5521_MODE_R_M			0x30	/* Operation Mode Register */
+#define LP5521_MODE_G_M			0x0C
+#define LP5521_MODE_B_M			0x03
+#define LP5521_LOAD_R			0x10
+#define LP5521_LOAD_G			0x04
+#define LP5521_LOAD_B			0x01
 
-struct lp5521_led {
-	int			id;
-	u8			chan_nr;
-	u8			led_current;
-	u8			max_current;
-	struct led_classdev	cdev;
-	struct work_struct	brightness_work;
-	u8			brightness;
-};
+#define LP5521_R_IS_LOADING(mode)	\
+	((mode & LP5521_MODE_R_M) == LP5521_LOAD_R)
+#define LP5521_G_IS_LOADING(mode)	\
+	((mode & LP5521_MODE_G_M) == LP5521_LOAD_G)
+#define LP5521_B_IS_LOADING(mode)	\
+	((mode & LP5521_MODE_B_M) == LP5521_LOAD_B)
 
-struct lp5521_chip {
-	struct lp5521_platform_data *pdata;
-	struct mutex		lock; /* Serialize control */
-	struct i2c_client	*client;
-	struct lp5521_engine	engines[LP5521_MAX_ENGINES];
-	struct lp5521_led	leds[LP5521_MAX_LEDS];
-	u8			num_channels;
-	u8			num_leds;
-};
+#define LP5521_EXEC_R_M			0x30	/* Enable Register */
+#define LP5521_EXEC_G_M			0x0C
+#define LP5521_EXEC_B_M			0x03
+#define LP5521_EXEC_M			0x3F
+#define LP5521_RUN_R			0x20
+#define LP5521_RUN_G			0x08
+#define LP5521_RUN_B			0x02
 
-static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
+static inline void lp5521_wait_opmode_done(void)
 {
-	return container_of(cdev, struct lp5521_led, cdev);
+	/* operation mode change needs to be longer than 153 us */
+	usleep_range(200, 300);
 }
 
-static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine)
+static inline void lp5521_wait_enable_done(void)
 {
-	return container_of(engine, struct lp5521_chip,
-			    engines[engine->id - 1]);
+	/* it takes more 488 us to update ENABLE register */
+	usleep_range(500, 600);
 }
 
-static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led)
+static void lp5521_set_led_current(struct lp55xx_led *led, u8 led_current)
 {
-	return container_of(led, struct lp5521_chip,
-			    leds[led->id]);
+	led->led_current = led_current;
+	lp55xx_write(led->chip, LP5521_REG_LED_CURRENT_BASE + led->chan_nr,
+		led_current);
 }
 
-static void lp5521_led_brightness_work(struct work_struct *work);
-
-static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
+static void lp5521_load_engine(struct lp55xx_chip *chip)
 {
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
+	enum lp55xx_engine_index idx = chip->engine_idx;
+	u8 mask[] = {
+		[LP55XX_ENGINE_1] = LP5521_MODE_R_M,
+		[LP55XX_ENGINE_2] = LP5521_MODE_G_M,
+		[LP55XX_ENGINE_3] = LP5521_MODE_B_M,
+	};
 
-static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
-{
-	s32 ret;
+	u8 val[] = {
+		[LP55XX_ENGINE_1] = LP5521_LOAD_R,
+		[LP55XX_ENGINE_2] = LP5521_LOAD_G,
+		[LP55XX_ENGINE_3] = LP5521_LOAD_B,
+	};
 
-	ret = i2c_smbus_read_byte_data(client, reg);
-	if (ret < 0)
-		return ret;
+	lp55xx_update_bits(chip, LP5521_REG_OP_MODE, mask[idx], val[idx]);
 
-	*buf = ret;
-	return 0;
+	lp5521_wait_opmode_done();
 }
 
-static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
+static void lp5521_stop_engine(struct lp55xx_chip *chip)
 {
-	struct lp5521_chip *chip = engine_to_lp5521(engine);
-	struct i2c_client *client = chip->client;
-	int ret;
-	u8 engine_state;
-
-	/* Only transition between RUN and DIRECT mode are handled here */
-	if (mode == LP5521_CMD_LOAD)
-		return 0;
-
-	if (mode == LP5521_CMD_DISABLED)
-		mode = LP5521_CMD_DIRECT;
-
-	ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
-	if (ret < 0)
-		return ret;
-
-	/* set mode only for this engine */
-	engine_state &= ~(engine->engine_mask);
-	mode &= engine->engine_mask;
-	engine_state |= mode;
-	return lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
+	lp55xx_write(chip, LP5521_REG_OP_MODE, 0);
+	lp5521_wait_opmode_done();
 }
 
-static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
+static void lp5521_run_engine(struct lp55xx_chip *chip, bool start)
 {
-	struct lp5521_chip *chip = engine_to_lp5521(eng);
-	struct i2c_client *client = chip->client;
 	int ret;
-	int addr;
 	u8 mode;
+	u8 exec;
 
-	/* move current engine to direct mode and remember the state */
-	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
-	if (ret)
-		return ret;
-
-	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
-	usleep_range(1000, 2000);
-	ret = lp5521_read(client, LP5521_REG_OP_MODE, &mode);
-	if (ret)
-		return ret;
-
-	/* For loading, all the engines to load mode */
-	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
-	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
-	usleep_range(1000, 2000);
-	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
-	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
-	usleep_range(1000, 2000);
-
-	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
-	i2c_smbus_write_i2c_block_data(client,
-				addr,
-				LP5521_PROG_MEM_SIZE,
-				pattern);
-
-	return lp5521_write(client, LP5521_REG_OP_MODE, mode);
-}
-
-static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
-{
-	return lp5521_write(chip->client,
-		    LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
-		    curr);
-}
-
-static void lp5521_init_engine(struct lp5521_chip *chip)
-{
-	int i;
-	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
-		chip->engines[i].id = i + 1;
-		chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
-		chip->engines[i].prog_page = i;
+	/* stop engine */
+	if (!start) {
+		lp5521_stop_engine(chip);
+		lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+		lp5521_wait_opmode_done();
+		return;
 	}
-}
-
-static int lp5521_configure(struct i2c_client *client)
-{
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
-	int ret;
-	u8 cfg;
-
-	lp5521_init_engine(chip);
-
-	/* Set all PWMs to direct control mode */
-	ret = lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
-
-	cfg = chip->pdata->update_config ?
-		: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
-	ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg);
-
-	/* Initialize all channels PWM to zero -> leds off */
-	ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
-	ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
-	ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
-
-	/* Set engines are set to run state when OP_MODE enables engines */
-	ret |= lp5521_write(client, LP5521_REG_ENABLE,
-			LP5521_ENABLE_RUN_PROGRAM);
-	/* enable takes 500us. 1 - 2 ms leaves some margin */
-	usleep_range(1000, 2000);
-
-	return ret;
-}
-
-static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
-{
-	int ret;
-	u8 status;
-
-	ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status);
-	if (ret < 0)
-		return ret;
-
-	/* Check that ext clock is really in use if requested */
-	if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT)
-		if  ((status & LP5521_EXT_CLK_USED) == 0)
-			return -EIO;
-	return 0;
-}
-
-static void lp5521_set_brightness(struct led_classdev *cdev,
-			     enum led_brightness brightness)
-{
-	struct lp5521_led *led = cdev_to_led(cdev);
-	led->brightness = (u8)brightness;
-	schedule_work(&led->brightness_work);
-}
-
-static void lp5521_led_brightness_work(struct work_struct *work)
-{
-	struct lp5521_led *led = container_of(work,
-					      struct lp5521_led,
-					      brightness_work);
-	struct lp5521_chip *chip = led_to_lp5521(led);
-	struct i2c_client *client = chip->client;
 
-	mutex_lock(&chip->lock);
-	lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr,
-		led->brightness);
-	mutex_unlock(&chip->lock);
-}
-
-/* Detect the chip by setting its ENABLE register and reading it back. */
-static int lp5521_detect(struct i2c_client *client)
-{
-	int ret;
-	u8 buf;
+	/*
+	 * To run the engine,
+	 * operation mode and enable register should updated at the same time
+	 */
 
-	ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
+	ret = lp55xx_read(chip, LP5521_REG_OP_MODE, &mode);
 	if (ret)
-		return ret;
-	/* enable takes 500us. 1 - 2 ms leaves some margin */
-	usleep_range(1000, 2000);
-	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
-	if (ret)
-		return ret;
-	if (buf != LP5521_ENABLE_DEFAULT)
-		return -ENODEV;
+		return;
 
-	return 0;
-}
+	ret = lp55xx_read(chip, LP5521_REG_ENABLE, &exec);
+	if (ret)
+		return;
 
-/* Set engine mode and create appropriate sysfs attributes, if required. */
-static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode)
-{
-	int ret = 0;
+	/* change operation mode to RUN only when each engine is loading */
+	if (LP5521_R_IS_LOADING(mode)) {
+		mode = (mode & ~LP5521_MODE_R_M) | LP5521_RUN_R;
+		exec = (exec & ~LP5521_EXEC_R_M) | LP5521_RUN_R;
+	}
 
-	/* if in that mode already do nothing, except for run */
-	if (mode == engine->mode && mode != LP5521_CMD_RUN)
-		return 0;
+	if (LP5521_G_IS_LOADING(mode)) {
+		mode = (mode & ~LP5521_MODE_G_M) | LP5521_RUN_G;
+		exec = (exec & ~LP5521_EXEC_G_M) | LP5521_RUN_G;
+	}
 
-	if (mode == LP5521_CMD_RUN) {
-		ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN);
-	} else if (mode == LP5521_CMD_LOAD) {
-		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
-		lp5521_set_engine_mode(engine, LP5521_CMD_LOAD);
-	} else if (mode == LP5521_CMD_DISABLED) {
-		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+	if (LP5521_B_IS_LOADING(mode)) {
+		mode = (mode & ~LP5521_MODE_B_M) | LP5521_RUN_B;
+		exec = (exec & ~LP5521_EXEC_B_M) | LP5521_RUN_B;
 	}
 
-	engine->mode = mode;
+	lp55xx_write(chip, LP5521_REG_OP_MODE, mode);
+	lp5521_wait_opmode_done();
 
-	return ret;
+	lp55xx_update_bits(chip, LP5521_REG_ENABLE, LP5521_EXEC_M, exec);
+	lp5521_wait_enable_done();
 }
 
-static int lp5521_do_store_load(struct lp5521_engine *engine,
-				const char *buf, size_t len)
+static int lp5521_update_program_memory(struct lp55xx_chip *chip,
+					const u8 *data, size_t size)
 {
-	struct lp5521_chip *chip = engine_to_lp5521(engine);
-	struct i2c_client *client = chip->client;
-	int  ret, nrchars, offset = 0, i = 0;
-	char c[3];
-	unsigned cmd;
+	enum lp55xx_engine_index idx = chip->engine_idx;
 	u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+	u8 addr[] = {
+		[LP55XX_ENGINE_1] = LP5521_REG_R_PROG_MEM,
+		[LP55XX_ENGINE_2] = LP5521_REG_G_PROG_MEM,
+		[LP55XX_ENGINE_3] = LP5521_REG_B_PROG_MEM,
+	};
+	unsigned cmd;
+	char c[3];
+	int program_size;
+	int nrchars;
+	int offset = 0;
+	int ret;
+	int i;
 
-	while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+	/* clear program memory before updating */
+	for (i = 0; i < LP5521_PROGRAM_LENGTH; i++)
+		lp55xx_write(chip, addr[idx] + i, 0);
+
+	i = 0;
+	while ((offset < size - 1) && (i < LP5521_PROGRAM_LENGTH)) {
 		/* separate sscanfs because length is working only for %s */
-		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
-		if (ret != 2)
-			goto fail;
+		ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+		if (ret != 1)
+			goto err;
+
 		ret = sscanf(c, "%2x", &cmd);
 		if (ret != 1)
-			goto fail;
-		pattern[i] = (u8)cmd;
+			goto err;
 
+		pattern[i] = (u8)cmd;
 		offset += nrchars;
 		i++;
 	}
 
 	/* Each instruction is 16bit long. Check that length is even */
 	if (i % 2)
-		goto fail;
+		goto err;
 
-	mutex_lock(&chip->lock);
-	if (engine->mode == LP5521_CMD_LOAD)
-		ret = lp5521_load_program(engine, pattern);
-	else
-		ret = -EINVAL;
-	mutex_unlock(&chip->lock);
+	program_size = i;
+	for (i = 0; i < program_size; i++)
+		lp55xx_write(chip, addr[idx] + i, pattern[i]);
 
-	if (ret) {
-		dev_err(&client->dev, "failed loading pattern\n");
-		return ret;
-	}
+	return 0;
 
-	return len;
-fail:
-	dev_err(&client->dev, "wrong pattern format\n");
+err:
+	dev_err(&chip->cl->dev, "wrong pattern format\n");
 	return -EINVAL;
 }
 
-static ssize_t store_engine_load(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t len, int nr)
+static void lp5521_firmware_loaded(struct lp55xx_chip *chip)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
-	return lp5521_do_store_load(&chip->engines[nr - 1], buf, len);
-}
+	const struct firmware *fw = chip->fw;
 
-#define store_load(nr)							\
-static ssize_t store_engine##nr##_load(struct device *dev,		\
-				     struct device_attribute *attr,	\
-				     const char *buf, size_t len)	\
-{									\
-	return store_engine_load(dev, attr, buf, len, nr);		\
-}
-store_load(1)
-store_load(2)
-store_load(3)
-
-static ssize_t show_engine_mode(struct device *dev,
-				struct device_attribute *attr,
-				char *buf, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
-	switch (chip->engines[nr - 1].mode) {
-	case LP5521_CMD_RUN:
-		return sprintf(buf, "run\n");
-	case LP5521_CMD_LOAD:
-		return sprintf(buf, "load\n");
-	case LP5521_CMD_DISABLED:
-		return sprintf(buf, "disabled\n");
-	default:
-		return sprintf(buf, "disabled\n");
+	if (fw->size > LP5521_PROGRAM_LENGTH) {
+		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+			fw->size);
+		return;
 	}
-}
 
-#define show_mode(nr)							\
-static ssize_t show_engine##nr##_mode(struct device *dev,		\
-				    struct device_attribute *attr,	\
-				    char *buf)				\
-{									\
-	return show_engine_mode(dev, attr, buf, nr);			\
+	/*
+	 * Program momery sequence
+	 *  1) set engine mode to "LOAD"
+	 *  2) write firmware data into program memory
+	 */
+
+	lp5521_load_engine(chip);
+	lp5521_update_program_memory(chip, fw->data, fw->size);
 }
-show_mode(1)
-show_mode(2)
-show_mode(3)
 
-static ssize_t store_engine_mode(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t len, int nr)
+static int lp5521_post_init_device(struct lp55xx_chip *chip)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
-	struct lp5521_engine *engine = &chip->engines[nr - 1];
-	mutex_lock(&chip->lock);
+	int ret;
+	u8 val;
 
-	if (!strncmp(buf, "run", 3))
-		lp5521_set_mode(engine, LP5521_CMD_RUN);
-	else if (!strncmp(buf, "load", 4))
-		lp5521_set_mode(engine, LP5521_CMD_LOAD);
-	else if (!strncmp(buf, "disabled", 8))
-		lp5521_set_mode(engine, LP5521_CMD_DISABLED);
+	/*
+	 * Make sure that the chip is reset by reading back the r channel
+	 * current reg. This is dummy read is required on some platforms -
+	 * otherwise further access to the R G B channels in the
+	 * LP5521_REG_ENABLE register will not have any effect - strange!
+	 */
+	ret = lp55xx_read(chip, LP5521_REG_R_CURRENT, &val);
+	if (ret) {
+		dev_err(&chip->cl->dev, "error in resetting chip\n");
+		return ret;
+	}
+	if (val != LP5521_REG_R_CURR_DEFAULT) {
+		dev_err(&chip->cl->dev,
+			"unexpected data in register (expected 0x%x got 0x%x)\n",
+			LP5521_REG_R_CURR_DEFAULT, val);
+		ret = -EINVAL;
+		return ret;
+	}
+	usleep_range(10000, 20000);
 
-	mutex_unlock(&chip->lock);
-	return len;
-}
+	/* Set all PWMs to direct control mode */
+	ret = lp55xx_write(chip, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
 
-#define store_mode(nr)							\
-static ssize_t store_engine##nr##_mode(struct device *dev,		\
-				     struct device_attribute *attr,	\
-				     const char *buf, size_t len)	\
-{									\
-	return store_engine_mode(dev, attr, buf, len, nr);		\
-}
-store_mode(1)
-store_mode(2)
-store_mode(3)
+	val = chip->pdata->update_config ?
+		: (LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+	ret = lp55xx_write(chip, LP5521_REG_CONFIG, val);
+	if (ret)
+		return ret;
 
-static ssize_t show_max_current(struct device *dev,
-			    struct device_attribute *attr,
-			    char *buf)
-{
-	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct lp5521_led *led = cdev_to_led(led_cdev);
+	/* Initialize all channels PWM to zero -> leds off */
+	lp55xx_write(chip, LP5521_REG_R_PWM, 0);
+	lp55xx_write(chip, LP5521_REG_G_PWM, 0);
+	lp55xx_write(chip, LP5521_REG_B_PWM, 0);
 
-	return sprintf(buf, "%d\n", led->max_current);
-}
+	/* Set engines are set to run state when OP_MODE enables engines */
+	ret = lp55xx_write(chip, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM);
+	if (ret)
+		return ret;
 
-static ssize_t show_current(struct device *dev,
-			    struct device_attribute *attr,
-			    char *buf)
-{
-	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct lp5521_led *led = cdev_to_led(led_cdev);
+	lp5521_wait_enable_done();
 
-	return sprintf(buf, "%d\n", led->led_current);
+	return 0;
 }
 
-static ssize_t store_current(struct device *dev,
-			     struct device_attribute *attr,
-			     const char *buf, size_t len)
+static int lp5521_run_selftest(struct lp55xx_chip *chip, char *buf)
 {
-	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct lp5521_led *led = cdev_to_led(led_cdev);
-	struct lp5521_chip *chip = led_to_lp5521(led);
-	ssize_t ret;
-	unsigned long curr;
+	struct lp55xx_platform_data *pdata = chip->pdata;
+	int ret;
+	u8 status;
 
-	if (kstrtoul(buf, 0, &curr))
-		return -EINVAL;
+	ret = lp55xx_read(chip, LP5521_REG_STATUS, &status);
+	if (ret < 0)
+		return ret;
 
-	if (curr > led->max_current)
-		return -EINVAL;
+	if (pdata->clock_mode != LP55XX_CLOCK_EXT)
+		return 0;
 
-	mutex_lock(&chip->lock);
-	ret = lp5521_set_led_current(chip, led->id, curr);
-	mutex_unlock(&chip->lock);
+	/* Check that ext clock is really in use if requested */
+	if  ((status & LP5521_EXT_CLK_USED) == 0)
+		return -EIO;
 
-	if (ret < 0)
-		return ret;
+	return 0;
+}
 
-	led->led_current = (u8)curr;
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+	struct lp55xx_led *led = container_of(work, struct lp55xx_led,
+					      brightness_work);
+	struct lp55xx_chip *chip = led->chip;
 
-	return len;
+	mutex_lock(&chip->lock);
+	lp55xx_write(chip, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+		led->brightness);
+	mutex_unlock(&chip->lock);
 }
 
 static ssize_t lp5521_selftest(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
 	int ret;
 
 	mutex_lock(&chip->lock);
@@ -534,133 +363,11 @@ static ssize_t lp5521_selftest(struct device *dev,
 	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
 }
 
-static void lp5521_clear_program_memory(struct i2c_client *cl)
-{
-	int i;
-	u8 rgb_mem[] = {
-		LP5521_REG_R_PROG_MEM,
-		LP5521_REG_G_PROG_MEM,
-		LP5521_REG_B_PROG_MEM,
-	};
-
-	for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) {
-		lp5521_write(cl, rgb_mem[i], 0);
-		lp5521_write(cl, rgb_mem[i] + 1, 0);
-	}
-}
-
-static void lp5521_write_program_memory(struct i2c_client *cl,
-				u8 base, u8 *rgb, int size)
-{
-	int i;
-
-	if (!rgb || size <= 0)
-		return;
-
-	for (i = 0; i < size; i++)
-		lp5521_write(cl, base + i, *(rgb + i));
-
-	lp5521_write(cl, base + i, 0);
-	lp5521_write(cl, base + i + 1, 0);
-}
-
-static inline struct lp5521_led_pattern *lp5521_get_pattern
-					(struct lp5521_chip *chip, u8 offset)
-{
-	struct lp5521_led_pattern *ptn;
-	ptn = chip->pdata->patterns + (offset - 1);
-	return ptn;
-}
-
-static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
-{
-	struct lp5521_led_pattern *ptn;
-	struct i2c_client *cl = chip->client;
-	int num_patterns = chip->pdata->num_patterns;
-
-	if (mode > num_patterns || !(chip->pdata->patterns))
-		return;
-
-	if (mode == PATTERN_OFF) {
-		lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
-		usleep_range(1000, 2000);
-		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
-	} else {
-		ptn = lp5521_get_pattern(chip, mode);
-		if (!ptn)
-			return;
-
-		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
-		usleep_range(1000, 2000);
-
-		lp5521_clear_program_memory(cl);
-
-		lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM,
-					ptn->r, ptn->size_r);
-		lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM,
-					ptn->g, ptn->size_g);
-		lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM,
-					ptn->b, ptn->size_b);
-
-		lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
-		usleep_range(1000, 2000);
-		lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM);
-	}
-}
-
-static ssize_t store_led_pattern(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf, size_t len)
-{
-	struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
-	unsigned long val;
-	int ret;
-
-	ret = kstrtoul(buf, 16, &val);
-	if (ret)
-		return ret;
-
-	lp5521_run_led_pattern(val, chip);
-
-	return len;
-}
-
-/* led class device attributes */
-static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
-static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
-
-static struct attribute *lp5521_led_attributes[] = {
-	&dev_attr_led_current.attr,
-	&dev_attr_max_current.attr,
-	NULL,
-};
-
-static struct attribute_group lp5521_led_attribute_group = {
-	.attrs = lp5521_led_attributes
-};
-
 /* device attributes */
-static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR,
-		   show_engine1_mode, store_engine1_mode);
-static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR,
-		   show_engine2_mode, store_engine2_mode);
-static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR,
-		   show_engine3_mode, store_engine3_mode);
-static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
-static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
-static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
 static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
-static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern);
 
 static struct attribute *lp5521_attributes[] = {
-	&dev_attr_engine1_mode.attr,
-	&dev_attr_engine2_mode.attr,
-	&dev_attr_engine3_mode.attr,
 	&dev_attr_selftest.attr,
-	&dev_attr_engine1_load.attr,
-	&dev_attr_engine2_load.attr,
-	&dev_attr_engine3_load.attr,
-	&dev_attr_led_pattern.attr,
 	NULL
 };
 
@@ -668,217 +375,91 @@ static const struct attribute_group lp5521_group = {
 	.attrs = lp5521_attributes,
 };
 
-static int lp5521_register_sysfs(struct i2c_client *client)
-{
-	struct device *dev = &client->dev;
-	return sysfs_create_group(&dev->kobj, &lp5521_group);
-}
-
-static void lp5521_unregister_sysfs(struct i2c_client *client)
-{
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
-	struct device *dev = &client->dev;
-	int i;
-
-	sysfs_remove_group(&dev->kobj, &lp5521_group);
-
-	for (i = 0; i < chip->num_leds; i++)
-		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
-				&lp5521_led_attribute_group);
-}
-
-static int lp5521_init_led(struct lp5521_led *led,
-				struct i2c_client *client,
-				int chan, struct lp5521_platform_data *pdata)
-{
-	struct device *dev = &client->dev;
-	char name[32];
-	int res;
-
-	if (chan >= LP5521_MAX_LEDS)
-		return -EINVAL;
-
-	if (pdata->led_config[chan].led_current == 0)
-		return 0;
-
-	led->led_current = pdata->led_config[chan].led_current;
-	led->max_current = pdata->led_config[chan].max_current;
-	led->chan_nr = pdata->led_config[chan].chan_nr;
-
-	if (led->chan_nr >= LP5521_MAX_LEDS) {
-		dev_err(dev, "Use channel numbers between 0 and %d\n",
-			LP5521_MAX_LEDS - 1);
-		return -EINVAL;
-	}
-
-	led->cdev.brightness_set = lp5521_set_brightness;
-	if (pdata->led_config[chan].name) {
-		led->cdev.name = pdata->led_config[chan].name;
-	} else {
-		snprintf(name, sizeof(name), "%s:channel%d",
-			pdata->label ?: client->name, chan);
-		led->cdev.name = name;
-	}
-
-	res = led_classdev_register(dev, &led->cdev);
-	if (res < 0) {
-		dev_err(dev, "couldn't register led on channel %d\n", chan);
-		return res;
-	}
-
-	res = sysfs_create_group(&led->cdev.dev->kobj,
-			&lp5521_led_attribute_group);
-	if (res < 0) {
-		dev_err(dev, "couldn't register current attribute\n");
-		led_classdev_unregister(&led->cdev);
-		return res;
-	}
-	return 0;
-}
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5521_cfg = {
+	.reset = {
+		.addr = LP5521_REG_RESET,
+		.val  = LP5521_RESET,
+	},
+	.enable = {
+		.addr = LP5521_REG_ENABLE,
+		.val  = LP5521_ENABLE_DEFAULT,
+	},
+	.max_channel  = LP5521_MAX_LEDS,
+	.post_init_device   = lp5521_post_init_device,
+	.brightness_work_fn = lp5521_led_brightness_work,
+	.set_led_current    = lp5521_set_led_current,
+	.firmware_cb        = lp5521_firmware_loaded,
+	.run_engine         = lp5521_run_engine,
+	.dev_attr_group     = &lp5521_group,
+};
 
 static int lp5521_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
-	struct lp5521_chip		*chip;
-	struct lp5521_platform_data	*pdata;
-	int ret, i, led;
-	u8 buf;
-
-	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-
-	i2c_set_clientdata(client, chip);
-	chip->client = client;
-
-	pdata = client->dev.platform_data;
+	int ret;
+	struct lp55xx_chip *chip;
+	struct lp55xx_led *led;
+	struct lp55xx_platform_data *pdata = client->dev.platform_data;
 
 	if (!pdata) {
 		dev_err(&client->dev, "no platform data\n");
 		return -EINVAL;
 	}
 
-	mutex_init(&chip->lock);
-
-	chip->pdata   = pdata;
-
-	if (pdata->setup_resources) {
-		ret = pdata->setup_resources();
-		if (ret < 0)
-			return ret;
-	}
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
 
-	if (pdata->enable) {
-		pdata->enable(0);
-		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
-		pdata->enable(1);
-		usleep_range(1000, 2000); /* 500us abs min. */
-	}
+	led = devm_kzalloc(&client->dev,
+			sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
 
-	lp5521_write(client, LP5521_REG_RESET, 0xff);
-	usleep_range(10000, 20000); /*
-				     * Exact value is not available. 10 - 20ms
-				     * appears to be enough for reset.
-				     */
+	chip->cl = client;
+	chip->pdata = pdata;
+	chip->cfg = &lp5521_cfg;
 
-	/*
-	 * Make sure that the chip is reset by reading back the r channel
-	 * current reg. This is dummy read is required on some platforms -
-	 * otherwise further access to the R G B channels in the
-	 * LP5521_REG_ENABLE register will not have any effect - strange!
-	 */
-	ret = lp5521_read(client, LP5521_REG_R_CURRENT, &buf);
-	if (ret) {
-		dev_err(&client->dev, "error in resetting chip\n");
-		goto fail2;
-	}
-	if (buf != LP5521_REG_R_CURR_DEFAULT) {
-		dev_err(&client->dev,
-			"unexpected data in register (expected 0x%x got 0x%x)\n",
-			LP5521_REG_R_CURR_DEFAULT, buf);
-		ret = -EINVAL;
-		goto fail2;
-	}
-	usleep_range(10000, 20000);
+	mutex_init(&chip->lock);
 
-	ret = lp5521_detect(client);
+	i2c_set_clientdata(client, led);
 
-	if (ret) {
-		dev_err(&client->dev, "Chip not found\n");
-		goto fail2;
-	}
+	ret = lp55xx_init_device(chip);
+	if (ret)
+		goto err_init;
 
 	dev_info(&client->dev, "%s programmable led chip found\n", id->name);
 
-	ret = lp5521_configure(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "error configuring chip\n");
-		goto fail1;
-	}
-
-	/* Initialize leds */
-	chip->num_channels = pdata->num_channels;
-	chip->num_leds = 0;
-	led = 0;
-	for (i = 0; i < pdata->num_channels; i++) {
-		/* Do not initialize channels that are not connected */
-		if (pdata->led_config[i].led_current == 0)
-			continue;
-
-		ret = lp5521_init_led(&chip->leds[led], client, i, pdata);
-		if (ret) {
-			dev_err(&client->dev, "error initializing leds\n");
-			goto fail2;
-		}
-		chip->num_leds++;
-
-		chip->leds[led].id = led;
-		/* Set initial LED current */
-		lp5521_set_led_current(chip, led,
-				chip->leds[led].led_current);
-
-		INIT_WORK(&(chip->leds[led].brightness_work),
-			lp5521_led_brightness_work);
-
-		led++;
-	}
+	ret = lp55xx_register_leds(led, chip);
+	if (ret)
+		goto err_register_leds;
 
-	ret = lp5521_register_sysfs(client);
+	ret = lp55xx_register_sysfs(chip);
 	if (ret) {
 		dev_err(&client->dev, "registering sysfs failed\n");
-		goto fail2;
-	}
-	return ret;
-fail2:
-	for (i = 0; i < chip->num_leds; i++) {
-		led_classdev_unregister(&chip->leds[i].cdev);
-		cancel_work_sync(&chip->leds[i].brightness_work);
+		goto err_register_sysfs;
 	}
-fail1:
-	if (pdata->enable)
-		pdata->enable(0);
-	if (pdata->release_resources)
-		pdata->release_resources();
+
+	return 0;
+
+err_register_sysfs:
+	lp55xx_unregister_leds(led, chip);
+err_register_leds:
+	lp55xx_deinit_device(chip);
+err_init:
 	return ret;
 }
 
 static int lp5521_remove(struct i2c_client *client)
 {
-	struct lp5521_chip *chip = i2c_get_clientdata(client);
-	int i;
+	struct lp55xx_led *led = i2c_get_clientdata(client);
+	struct lp55xx_chip *chip = led->chip;
 
-	lp5521_run_led_pattern(PATTERN_OFF, chip);
-	lp5521_unregister_sysfs(client);
-
-	for (i = 0; i < chip->num_leds; i++) {
-		led_classdev_unregister(&chip->leds[i].cdev);
-		cancel_work_sync(&chip->leds[i].brightness_work);
-	}
+	lp5521_stop_engine(chip);
+	lp55xx_unregister_sysfs(chip);
+	lp55xx_unregister_leds(led, chip);
+	lp55xx_deinit_device(chip);
 
-	if (chip->pdata->enable)
-		chip->pdata->enable(0);
-	if (chip->pdata->release_resources)
-		chip->pdata->release_resources();
 	return 0;
 }
 
@@ -900,5 +481,6 @@ static struct i2c_driver lp5521_driver = {
 module_i2c_driver(lp5521_driver);
 
 MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
 MODULE_DESCRIPTION("LP5521 LED engine");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 7f5be8948cd..229f734040a 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -2,8 +2,10 @@
  * lp5523.c - LP5523 LED Driver
  *
  * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments
  *
  * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *          Milo(Woogyom) Kim <milo.kim@ti.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -20,502 +22,351 @@
  * 02110-1301 USA
  */
 
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/ctype.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
 #include <linux/leds.h>
-#include <linux/leds-lp5523.h>
-#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
 
+#include "leds-lp55xx-common.h"
+
+#define LP5523_PROGRAM_LENGTH		32
+#define LP5523_MAX_LEDS			9
+
+/* Registers */
 #define LP5523_REG_ENABLE		0x00
 #define LP5523_REG_OP_MODE		0x01
-#define LP5523_REG_RATIOMETRIC_MSB	0x02
-#define LP5523_REG_RATIOMETRIC_LSB	0x03
 #define LP5523_REG_ENABLE_LEDS_MSB	0x04
 #define LP5523_REG_ENABLE_LEDS_LSB	0x05
-#define LP5523_REG_LED_CNTRL_BASE	0x06
 #define LP5523_REG_LED_PWM_BASE		0x16
 #define LP5523_REG_LED_CURRENT_BASE	0x26
 #define LP5523_REG_CONFIG		0x36
-#define LP5523_REG_CHANNEL1_PC		0x37
-#define LP5523_REG_CHANNEL2_PC		0x38
-#define LP5523_REG_CHANNEL3_PC		0x39
-#define LP5523_REG_STATUS		0x3a
-#define LP5523_REG_GPO			0x3b
-#define LP5523_REG_VARIABLE		0x3c
-#define LP5523_REG_RESET		0x3d
-#define LP5523_REG_TEMP_CTRL		0x3e
-#define LP5523_REG_TEMP_READ		0x3f
-#define LP5523_REG_TEMP_WRITE		0x40
+#define LP5523_REG_STATUS		0x3A
+#define LP5523_REG_RESET		0x3D
 #define LP5523_REG_LED_TEST_CTRL	0x41
 #define LP5523_REG_LED_TEST_ADC		0x42
-#define LP5523_REG_ENG1_VARIABLE	0x45
-#define LP5523_REG_ENG2_VARIABLE	0x46
-#define LP5523_REG_ENG3_VARIABLE	0x47
-#define LP5523_REG_MASTER_FADER1	0x48
-#define LP5523_REG_MASTER_FADER2	0x49
-#define LP5523_REG_MASTER_FADER3	0x4a
-#define LP5523_REG_CH1_PROG_START	0x4c
-#define LP5523_REG_CH2_PROG_START	0x4d
-#define LP5523_REG_CH3_PROG_START	0x4e
-#define LP5523_REG_PROG_PAGE_SEL	0x4f
+#define LP5523_REG_PROG_PAGE_SEL	0x4F
 #define LP5523_REG_PROG_MEM		0x50
 
-#define LP5523_CMD_LOAD			0x15 /* 00010101 */
-#define LP5523_CMD_RUN			0x2a /* 00101010 */
-#define LP5523_CMD_DISABLED		0x00 /* 00000000 */
-
+/* Bit description in registers */
 #define LP5523_ENABLE			0x40
 #define LP5523_AUTO_INC			0x40
 #define LP5523_PWR_SAVE			0x20
 #define LP5523_PWM_PWR_SAVE		0x04
-#define LP5523_CP_1			0x08
-#define LP5523_CP_1_5			0x10
 #define LP5523_CP_AUTO			0x18
-#define LP5523_INT_CLK			0x01
 #define LP5523_AUTO_CLK			0x02
+
 #define LP5523_EN_LEDTEST		0x80
 #define LP5523_LEDTEST_DONE		0x80
-
-#define LP5523_DEFAULT_CURRENT		50 /* microAmps */
-#define LP5523_PROGRAM_LENGTH		32 /* in bytes */
-#define LP5523_PROGRAM_PAGES		6
+#define LP5523_RESET			0xFF
 #define LP5523_ADC_SHORTCIRC_LIM	80
-
-#define LP5523_LEDS			9
-#define LP5523_ENGINES			3
-
-#define LP5523_ENG_MASK_BASE		0x30 /* 00110000 */
-
-#define LP5523_ENG_STATUS_MASK          0x07 /* 00000111 */
-
-#define LP5523_IRQ_FLAGS                IRQF_TRIGGER_FALLING
-
 #define LP5523_EXT_CLK_USED		0x08
 
-#define LED_ACTIVE(mux, led)		(!!(mux & (0x0001 << led)))
-#define SHIFT_MASK(id)			(((id) - 1) * 2)
+/* Memory Page Selection */
+#define LP5523_PAGE_ENG1		0
+#define LP5523_PAGE_ENG2		1
+#define LP5523_PAGE_ENG3		2
+
+/* Program Memory Operations */
+#define LP5523_MODE_ENG1_M		0x30	/* Operation Mode Register */
+#define LP5523_MODE_ENG2_M		0x0C
+#define LP5523_MODE_ENG3_M		0x03
+#define LP5523_LOAD_ENG1		0x10
+#define LP5523_LOAD_ENG2		0x04
+#define LP5523_LOAD_ENG3		0x01
+
+#define LP5523_ENG1_IS_LOADING(mode)	\
+	((mode & LP5523_MODE_ENG1_M) == LP5523_LOAD_ENG1)
+#define LP5523_ENG2_IS_LOADING(mode)	\
+	((mode & LP5523_MODE_ENG2_M) == LP5523_LOAD_ENG2)
+#define LP5523_ENG3_IS_LOADING(mode)	\
+	((mode & LP5523_MODE_ENG3_M) == LP5523_LOAD_ENG3)
+
+#define LP5523_EXEC_ENG1_M		0x30	/* Enable Register */
+#define LP5523_EXEC_ENG2_M		0x0C
+#define LP5523_EXEC_ENG3_M		0x03
+#define LP5523_EXEC_M			0x3F
+#define LP5523_RUN_ENG1			0x20
+#define LP5523_RUN_ENG2			0x08
+#define LP5523_RUN_ENG3			0x02
 
 enum lp5523_chip_id {
 	LP5523,
 	LP55231,
 };
 
-struct lp5523_engine {
-	int		id;
-	u8		mode;
-	u8		prog_page;
-	u8		mux_page;
-	u16		led_mux;
-	u8		engine_mask;
-};
-
-struct lp5523_led {
-	int			id;
-	u8			chan_nr;
-	u8			led_current;
-	u8			max_current;
-	struct led_classdev     cdev;
-	struct work_struct	brightness_work;
-	u8			brightness;
-};
-
-struct lp5523_chip {
-	struct mutex		lock; /* Serialize control */
-	struct i2c_client	*client;
-	struct lp5523_engine	engines[LP5523_ENGINES];
-	struct lp5523_led	leds[LP5523_LEDS];
-	struct lp5523_platform_data *pdata;
-	u8			num_channels;
-	u8			num_leds;
-};
-
-static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
+static inline void lp5523_wait_opmode_done(void)
 {
-	return container_of(cdev, struct lp5523_led, cdev);
-}
-
-static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
-{
-	return container_of(engine, struct lp5523_chip,
-			    engines[engine->id - 1]);
-}
-
-static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
-{
-	return container_of(led, struct lp5523_chip,
-			    leds[led->id]);
+	usleep_range(1000, 2000);
 }
 
-static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
-static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
-static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern);
-
-static void lp5523_led_brightness_work(struct work_struct *work);
-
-static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
 {
-	return i2c_smbus_write_byte_data(client, reg, value);
+	led->led_current = led_current;
+	lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+		led_current);
 }
 
-static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
-{
-	s32 ret = i2c_smbus_read_byte_data(client, reg);
-
-	if (ret < 0)
-		return ret;
-
-	*buf = ret;
-	return 0;
-}
-
-static int lp5523_detect(struct i2c_client *client)
+static int lp5523_post_init_device(struct lp55xx_chip *chip)
 {
 	int ret;
-	u8 buf;
 
-	ret = lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
-	if (ret)
-		return ret;
-	ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+	ret = lp55xx_write(chip, LP5523_REG_ENABLE, LP5523_ENABLE);
 	if (ret)
 		return ret;
-	if (buf == 0x40)
-		return 0;
-	else
-		return -ENODEV;
-}
 
-static int lp5523_configure(struct i2c_client *client)
-{
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	int ret = 0;
-	u8 status;
-
-	/* one pattern per engine setting led mux start and stop addresses */
-	static const u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
-		{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
-		{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
-		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
-	};
-
-	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
 	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
 	usleep_range(1000, 2000);
 
-	ret |= lp5523_write(client, LP5523_REG_CONFIG,
+	ret = lp55xx_write(chip, LP5523_REG_CONFIG,
 			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
 			    LP5523_CP_AUTO | LP5523_AUTO_CLK |
 			    LP5523_PWM_PWR_SAVE);
+	if (ret)
+		return ret;
 
 	/* turn on all leds */
-	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
-	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
-
-	/* hardcode 32 bytes of memory for each engine from program memory */
-	ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
-	ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
-	ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
-
-	/* write led mux address space for each channel */
-	ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
-	ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
-	ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
-
-	if (ret) {
-		dev_err(&client->dev, "could not load mux programs\n");
-		return -1;
-	}
-
-	/* set all engines exec state and mode to run 00101010 */
-	ret |= lp5523_write(client, LP5523_REG_ENABLE,
-			    (LP5523_CMD_RUN | LP5523_ENABLE));
-
-	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
-
-	if (ret) {
-		dev_err(&client->dev, "could not start mux programs\n");
-		return -1;
-	}
-
-	/* Let the programs run for couple of ms and check the engine status */
-	usleep_range(3000, 6000);
-	ret = lp5523_read(client, LP5523_REG_STATUS, &status);
-	if (ret < 0)
+	ret = lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+	if (ret)
 		return ret;
 
-	status &= LP5523_ENG_STATUS_MASK;
-
-	if (status == LP5523_ENG_STATUS_MASK) {
-		dev_dbg(&client->dev, "all engines configured\n");
-	} else {
-		dev_info(&client->dev, "status == %x\n", status);
-		dev_err(&client->dev, "cound not configure LED engine\n");
-		return -1;
-	}
-
-	dev_info(&client->dev, "disabling engines\n");
-
-	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
-
-	return ret;
+	return lp55xx_write(chip, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
 }
 
-static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+static void lp5523_load_engine(struct lp55xx_chip *chip)
 {
-	struct lp5523_chip *chip = engine_to_lp5523(engine);
-	struct i2c_client *client = chip->client;
-	int ret;
-	u8 engine_state;
+	enum lp55xx_engine_index idx = chip->engine_idx;
+	u8 mask[] = {
+		[LP55XX_ENGINE_1] = LP5523_MODE_ENG1_M,
+		[LP55XX_ENGINE_2] = LP5523_MODE_ENG2_M,
+		[LP55XX_ENGINE_3] = LP5523_MODE_ENG3_M,
+	};
 
-	ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
-	if (ret)
-		goto fail;
+	u8 val[] = {
+		[LP55XX_ENGINE_1] = LP5523_LOAD_ENG1,
+		[LP55XX_ENGINE_2] = LP5523_LOAD_ENG2,
+		[LP55XX_ENGINE_3] = LP5523_LOAD_ENG3,
+	};
 
-	engine_state &= ~(engine->engine_mask);
+	u8 page_sel[] = {
+		[LP55XX_ENGINE_1] = LP5523_PAGE_ENG1,
+		[LP55XX_ENGINE_2] = LP5523_PAGE_ENG2,
+		[LP55XX_ENGINE_3] = LP5523_PAGE_ENG3,
+	};
 
-	/* set mode only for this engine */
-	mode &= engine->engine_mask;
+	lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]);
 
-	engine_state |= mode;
+	lp5523_wait_opmode_done();
 
-	ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
-fail:
-	return ret;
+	lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]);
 }
 
-static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+static void lp5523_stop_engine(struct lp55xx_chip *chip)
 {
-	struct lp5523_chip *chip = engine_to_lp5523(engine);
-	struct i2c_client *client = chip->client;
-	int ret = 0;
-
-	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+	lp55xx_write(chip, LP5523_REG_OP_MODE, 0);
+	lp5523_wait_opmode_done();
+}
 
-	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
-	ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
-			    (u8)(mux >> 8));
-	ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
-	engine->led_mux = mux;
+static void lp5523_turn_off_channels(struct lp55xx_chip *chip)
+{
+	int i;
 
-	return ret;
+	for (i = 0; i < LP5523_MAX_LEDS; i++)
+		lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0);
 }
 
-static int lp5523_load_program(struct lp5523_engine *engine, const u8 *pattern)
+static void lp5523_run_engine(struct lp55xx_chip *chip, bool start)
 {
-	struct lp5523_chip *chip = engine_to_lp5523(engine);
-	struct i2c_client *client = chip->client;
+	int ret;
+	u8 mode;
+	u8 exec;
 
-	int ret = 0;
+	/* stop engine */
+	if (!start) {
+		lp5523_stop_engine(chip);
+		lp5523_turn_off_channels(chip);
+		return;
+	}
 
-	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+	/*
+	 * To run the engine,
+	 * operation mode and enable register should updated at the same time
+	 */
 
-	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
-			    engine->prog_page);
-	ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
-					      LP5523_PROGRAM_LENGTH, pattern);
+	ret = lp55xx_read(chip, LP5523_REG_OP_MODE, &mode);
+	if (ret)
+		return;
 
-	return ret;
-}
+	ret = lp55xx_read(chip, LP5523_REG_ENABLE, &exec);
+	if (ret)
+		return;
 
-static int lp5523_run_program(struct lp5523_engine *engine)
-{
-	struct lp5523_chip *chip = engine_to_lp5523(engine);
-	struct i2c_client *client = chip->client;
-	int ret;
+	/* change operation mode to RUN only when each engine is loading */
+	if (LP5523_ENG1_IS_LOADING(mode)) {
+		mode = (mode & ~LP5523_MODE_ENG1_M) | LP5523_RUN_ENG1;
+		exec = (exec & ~LP5523_EXEC_ENG1_M) | LP5523_RUN_ENG1;
+	}
 
-	ret = lp5523_write(client, LP5523_REG_ENABLE,
-					LP5523_CMD_RUN | LP5523_ENABLE);
-	if (ret)
-		goto fail;
+	if (LP5523_ENG2_IS_LOADING(mode)) {
+		mode = (mode & ~LP5523_MODE_ENG2_M) | LP5523_RUN_ENG2;
+		exec = (exec & ~LP5523_EXEC_ENG2_M) | LP5523_RUN_ENG2;
+	}
 
-	ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
-fail:
-	return ret;
+	if (LP5523_ENG3_IS_LOADING(mode)) {
+		mode = (mode & ~LP5523_MODE_ENG3_M) | LP5523_RUN_ENG3;
+		exec = (exec & ~LP5523_EXEC_ENG3_M) | LP5523_RUN_ENG3;
+	}
+
+	lp55xx_write(chip, LP5523_REG_OP_MODE, mode);
+	lp5523_wait_opmode_done();
+
+	lp55xx_update_bits(chip, LP5523_REG_ENABLE, LP5523_EXEC_M, exec);
 }
 
-static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+static int lp5523_update_program_memory(struct lp55xx_chip *chip,
+					const u8 *data, size_t size)
 {
+	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+	unsigned cmd;
+	char c[3];
+	int update_size;
+	int nrchars;
+	int offset = 0;
+	int ret;
 	int i;
-	u16 tmp_mux = 0;
-
-	len = min_t(int, len, LP5523_LEDS);
-	for (i = 0; i < len; i++) {
-		switch (buf[i]) {
-		case '1':
-			tmp_mux |= (1 << i);
-			break;
-		case '0':
-			break;
-		case '\n':
-			i = len;
-			break;
-		default:
-			return -1;
-		}
-	}
-	*mux = tmp_mux;
 
-	return 0;
-}
+	/* clear program memory before updating */
+	for (i = 0; i < LP5523_PROGRAM_LENGTH; i++)
+		lp55xx_write(chip, LP5523_REG_PROG_MEM + i, 0);
 
-static void lp5523_mux_to_array(u16 led_mux, char *array)
-{
-	int i, pos = 0;
-	for (i = 0; i < LP5523_LEDS; i++)
-		pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+	i = 0;
+	while ((offset < size - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
+		if (ret != 1)
+			goto err;
 
-	array[pos] = '\0';
-}
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto err;
 
-/*--------------------------------------------------------------*/
-/*			Sysfs interface				*/
-/*--------------------------------------------------------------*/
+		pattern[i] = (u8)cmd;
+		offset += nrchars;
+		i++;
+	}
 
-static ssize_t show_engine_leds(struct device *dev,
-			    struct device_attribute *attr,
-			    char *buf, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	char mux[LP5523_LEDS + 1];
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto err;
 
-	lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+	update_size = i;
+	for (i = 0; i < update_size; i++)
+		lp55xx_write(chip, LP5523_REG_PROG_MEM + i, pattern[i]);
 
-	return sprintf(buf, "%s\n", mux);
-}
+	return 0;
 
-#define show_leds(nr)							\
-static ssize_t show_engine##nr##_leds(struct device *dev,		\
-			    struct device_attribute *attr,		\
-			    char *buf)					\
-{									\
-	return show_engine_leds(dev, attr, buf, nr);			\
+err:
+	dev_err(&chip->cl->dev, "wrong pattern format\n");
+	return -EINVAL;
 }
-show_leds(1)
-show_leds(2)
-show_leds(3)
 
-static ssize_t store_engine_leds(struct device *dev,
-			     struct device_attribute *attr,
-			     const char *buf, size_t len, int nr)
+static void lp5523_firmware_loaded(struct lp55xx_chip *chip)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	u16 mux = 0;
-	ssize_t ret;
+	const struct firmware *fw = chip->fw;
 
-	if (lp5523_mux_parse(buf, &mux, len))
-		return -EINVAL;
-
-	mutex_lock(&chip->lock);
-	ret = -EINVAL;
-	if (chip->engines[nr - 1].mode != LP5523_CMD_LOAD)
-		goto leave;
+	if (fw->size > LP5523_PROGRAM_LENGTH) {
+		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
+			fw->size);
+		return;
+	}
 
-	if (lp5523_load_mux(&chip->engines[nr - 1], mux))
-		goto leave;
+	/*
+	 * Program momery sequence
+	 *  1) set engine mode to "LOAD"
+	 *  2) write firmware data into program memory
+	 */
 
-	ret = len;
-leave:
-	mutex_unlock(&chip->lock);
-	return ret;
+	lp5523_load_engine(chip);
+	lp5523_update_program_memory(chip, fw->data, fw->size);
 }
 
-#define store_leds(nr)						\
-static ssize_t store_engine##nr##_leds(struct device *dev,	\
-			     struct device_attribute *attr,	\
-			     const char *buf, size_t len)	\
-{								\
-	return store_engine_leds(dev, attr, buf, len, nr);	\
-}
-store_leds(1)
-store_leds(2)
-store_leds(3)
-
 static ssize_t lp5523_selftest(struct device *dev,
 			       struct device_attribute *attr,
 			       char *buf)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	struct lp55xx_platform_data *pdata = chip->pdata;
 	int i, ret, pos = 0;
-	int led = 0;
 	u8 status, adc, vdd;
 
 	mutex_lock(&chip->lock);
 
-	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
 	if (ret < 0)
 		goto fail;
 
 	/* Check that ext clock is really in use if requested */
-	if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+	if (pdata->clock_mode == LP55XX_CLOCK_EXT) {
 		if  ((status & LP5523_EXT_CLK_USED) == 0)
 			goto fail;
+	}
 
 	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
-	lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
-				    LP5523_EN_LEDTEST | 16);
+	lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16);
 	usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
-	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
 	if (ret < 0)
 		goto fail;
 
 	if (!(status & LP5523_LEDTEST_DONE))
 		usleep_range(3000, 6000); /* Was not ready. Wait little bit */
 
-	ret = lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+	ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &vdd);
 	if (ret < 0)
 		goto fail;
 
 	vdd--;	/* There may be some fluctuation in measurement */
 
-	for (i = 0; i < LP5523_LEDS; i++) {
+	for (i = 0; i < LP5523_MAX_LEDS; i++) {
 		/* Skip non-existing channels */
-		if (chip->pdata->led_config[i].led_current == 0)
+		if (pdata->led_config[i].led_current == 0)
 			continue;
 
 		/* Set default current */
-		lp5523_write(chip->client,
-			LP5523_REG_LED_CURRENT_BASE + i,
-			chip->pdata->led_config[i].led_current);
+		lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
+			pdata->led_config[i].led_current);
 
-		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+		lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0xff);
 		/* let current stabilize 2 - 4ms before measurements start */
 		usleep_range(2000, 4000);
-		lp5523_write(chip->client,
-			     LP5523_REG_LED_TEST_CTRL,
+		lp55xx_write(chip, LP5523_REG_LED_TEST_CTRL,
 			     LP5523_EN_LEDTEST | i);
 		/* ADC conversion time is 2.7 ms typically */
 		usleep_range(3000, 6000);
-		ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+		ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
 		if (ret < 0)
 			goto fail;
 
 		if (!(status & LP5523_LEDTEST_DONE))
 			usleep_range(3000, 6000);/* Was not ready. Wait. */
-		ret = lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+		ret = lp55xx_read(chip, LP5523_REG_LED_TEST_ADC, &adc);
 		if (ret < 0)
 			goto fail;
 
 		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
 			pos += sprintf(buf + pos, "LED %d FAIL\n", i);
 
-		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+		lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + i, 0x00);
 
 		/* Restore current */
-		lp5523_write(chip->client,
-			LP5523_REG_LED_CURRENT_BASE + i,
-			chip->leds[led].led_current);
+		lp55xx_write(chip, LP5523_REG_LED_CURRENT_BASE + i,
+			led->led_current);
 		led++;
 	}
 	if (pos == 0)
@@ -530,249 +381,22 @@ release_lock:
 	return pos;
 }
 
-static void lp5523_set_brightness(struct led_classdev *cdev,
-			     enum led_brightness brightness)
-{
-	struct lp5523_led *led = cdev_to_led(cdev);
-
-	led->brightness = (u8)brightness;
-
-	schedule_work(&led->brightness_work);
-}
-
 static void lp5523_led_brightness_work(struct work_struct *work)
 {
-	struct lp5523_led *led = container_of(work,
-					      struct lp5523_led,
+	struct lp55xx_led *led = container_of(work, struct lp55xx_led,
 					      brightness_work);
-	struct lp5523_chip *chip = led_to_lp5523(led);
-	struct i2c_client *client = chip->client;
+	struct lp55xx_chip *chip = led->chip;
 
 	mutex_lock(&chip->lock);
-
-	lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+	lp55xx_write(chip, LP5523_REG_LED_PWM_BASE + led->chan_nr,
 		     led->brightness);
-
-	mutex_unlock(&chip->lock);
-}
-
-static int lp5523_do_store_load(struct lp5523_engine *engine,
-				const char *buf, size_t len)
-{
-	struct lp5523_chip *chip = engine_to_lp5523(engine);
-	struct i2c_client *client = chip->client;
-	int  ret, nrchars, offset = 0, i = 0;
-	char c[3];
-	unsigned cmd;
-	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
-
-	if (engine->mode != LP5523_CMD_LOAD)
-		return -EINVAL;
-
-	while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
-		/* separate sscanfs because length is working only for %s */
-		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
-		ret = sscanf(c, "%2x", &cmd);
-		if (ret != 1)
-			goto fail;
-		pattern[i] = (u8)cmd;
-
-		offset += nrchars;
-		i++;
-	}
-
-	/* Each instruction is 16bit long. Check that length is even */
-	if (i % 2)
-		goto fail;
-
-	mutex_lock(&chip->lock);
-	ret = lp5523_load_program(engine, pattern);
 	mutex_unlock(&chip->lock);
-
-	if (ret) {
-		dev_err(&client->dev, "failed loading pattern\n");
-		return ret;
-	}
-
-	return len;
-fail:
-	dev_err(&client->dev, "wrong pattern format\n");
-	return -EINVAL;
-}
-
-static ssize_t store_engine_load(struct device *dev,
-				     struct device_attribute *attr,
-				     const char *buf, size_t len, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
 }
 
-#define store_load(nr)							\
-static ssize_t store_engine##nr##_load(struct device *dev,		\
-				     struct device_attribute *attr,	\
-				     const char *buf, size_t len)	\
-{									\
-	return store_engine_load(dev, attr, buf, len, nr);		\
-}
-store_load(1)
-store_load(2)
-store_load(3)
-
-static ssize_t show_engine_mode(struct device *dev,
-				struct device_attribute *attr,
-				char *buf, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	switch (chip->engines[nr - 1].mode) {
-	case LP5523_CMD_RUN:
-		return sprintf(buf, "run\n");
-	case LP5523_CMD_LOAD:
-		return sprintf(buf, "load\n");
-	case LP5523_CMD_DISABLED:
-		return sprintf(buf, "disabled\n");
-	default:
-		return sprintf(buf, "disabled\n");
-	}
-}
-
-#define show_mode(nr)							\
-static ssize_t show_engine##nr##_mode(struct device *dev,		\
-				    struct device_attribute *attr,	\
-				    char *buf)				\
-{									\
-	return show_engine_mode(dev, attr, buf, nr);			\
-}
-show_mode(1)
-show_mode(2)
-show_mode(3)
-
-static ssize_t store_engine_mode(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t len, int nr)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	struct lp5523_engine *engine = &chip->engines[nr - 1];
-	mutex_lock(&chip->lock);
-
-	if (!strncmp(buf, "run", 3))
-		lp5523_set_mode(engine, LP5523_CMD_RUN);
-	else if (!strncmp(buf, "load", 4))
-		lp5523_set_mode(engine, LP5523_CMD_LOAD);
-	else if (!strncmp(buf, "disabled", 8))
-		lp5523_set_mode(engine, LP5523_CMD_DISABLED);
-
-	mutex_unlock(&chip->lock);
-	return len;
-}
-
-#define store_mode(nr)							\
-static ssize_t store_engine##nr##_mode(struct device *dev,		\
-				     struct device_attribute *attr,	\
-				     const char *buf, size_t len)	\
-{									\
-	return store_engine_mode(dev, attr, buf, len, nr);		\
-}
-store_mode(1)
-store_mode(2)
-store_mode(3)
-
-static ssize_t show_max_current(struct device *dev,
-			    struct device_attribute *attr,
-			    char *buf)
-{
-	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct lp5523_led *led = cdev_to_led(led_cdev);
-
-	return sprintf(buf, "%d\n", led->max_current);
-}
-
-static ssize_t show_current(struct device *dev,
-			    struct device_attribute *attr,
-			    char *buf)
-{
-	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct lp5523_led *led = cdev_to_led(led_cdev);
-
-	return sprintf(buf, "%d\n", led->led_current);
-}
-
-static ssize_t store_current(struct device *dev,
-			     struct device_attribute *attr,
-			     const char *buf, size_t len)
-{
-	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct lp5523_led *led = cdev_to_led(led_cdev);
-	struct lp5523_chip *chip = led_to_lp5523(led);
-	ssize_t ret;
-	unsigned long curr;
-
-	if (kstrtoul(buf, 0, &curr))
-		return -EINVAL;
-
-	if (curr > led->max_current)
-		return -EINVAL;
-
-	mutex_lock(&chip->lock);
-	ret = lp5523_write(chip->client,
-			LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
-			(u8)curr);
-	mutex_unlock(&chip->lock);
-
-	if (ret < 0)
-		return ret;
-
-	led->led_current = (u8)curr;
-
-	return len;
-}
-
-/* led class device attributes */
-static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
-static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
-
-static struct attribute *lp5523_led_attributes[] = {
-	&dev_attr_led_current.attr,
-	&dev_attr_max_current.attr,
-	NULL,
-};
-
-static struct attribute_group lp5523_led_attribute_group = {
-	.attrs = lp5523_led_attributes
-};
-
-/* device attributes */
-static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUSR,
-		   show_engine1_mode, store_engine1_mode);
-static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUSR,
-		   show_engine2_mode, store_engine2_mode);
-static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUSR,
-		   show_engine3_mode, store_engine3_mode);
-static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUSR,
-		   show_engine1_leds, store_engine1_leds);
-static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUSR,
-		   show_engine2_leds, store_engine2_leds);
-static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUSR,
-		   show_engine3_leds, store_engine3_leds);
-static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
-static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
-static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
 static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
 
 static struct attribute *lp5523_attributes[] = {
-	&dev_attr_engine1_mode.attr,
-	&dev_attr_engine2_mode.attr,
-	&dev_attr_engine3_mode.attr,
 	&dev_attr_selftest.attr,
-	&dev_attr_engine1_load.attr,
-	&dev_attr_engine1_leds.attr,
-	&dev_attr_engine2_load.attr,
-	&dev_attr_engine2_leds.attr,
-	&dev_attr_engine3_load.attr,
-	&dev_attr_engine3_leds.attr,
 	NULL,
 };
 
@@ -780,252 +404,91 @@ static const struct attribute_group lp5523_group = {
 	.attrs = lp5523_attributes,
 };
 
-static int lp5523_register_sysfs(struct i2c_client *client)
-{
-	struct device *dev = &client->dev;
-	int ret;
-
-	ret = sysfs_create_group(&dev->kobj, &lp5523_group);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static void lp5523_unregister_sysfs(struct i2c_client *client)
-{
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	struct device *dev = &client->dev;
-	int i;
-
-	sysfs_remove_group(&dev->kobj, &lp5523_group);
-
-	for (i = 0; i < chip->num_leds; i++)
-		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
-				&lp5523_led_attribute_group);
-}
-
-/*--------------------------------------------------------------*/
-/*			Set chip operating mode			*/
-/*--------------------------------------------------------------*/
-static void lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
-{
-	/* if in that mode already do nothing, except for run */
-	if (mode == engine->mode && mode != LP5523_CMD_RUN)
-		return;
-
-	switch (mode) {
-	case LP5523_CMD_RUN:
-		lp5523_run_program(engine);
-		break;
-	case LP5523_CMD_LOAD:
-		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
-		lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
-		break;
-	case LP5523_CMD_DISABLED:
-		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
-		break;
-	default:
-		return;
-	}
-
-	engine->mode = mode;
-}
-
-/*--------------------------------------------------------------*/
-/*			Probe, Attach, Remove			*/
-/*--------------------------------------------------------------*/
-static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
-{
-	if (id < 1 || id > LP5523_ENGINES)
-		return -1;
-	engine->id = id;
-	engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
-	engine->prog_page = id - 1;
-	engine->mux_page = id + 2;
-
-	return 0;
-}
+/* Chip specific configurations */
+static struct lp55xx_device_config lp5523_cfg = {
+	.reset = {
+		.addr = LP5523_REG_RESET,
+		.val  = LP5523_RESET,
+	},
+	.enable = {
+		.addr = LP5523_REG_ENABLE,
+		.val  = LP5523_ENABLE,
+	},
+	.max_channel  = LP5523_MAX_LEDS,
+	.post_init_device   = lp5523_post_init_device,
+	.brightness_work_fn = lp5523_led_brightness_work,
+	.set_led_current    = lp5523_set_led_current,
+	.firmware_cb        = lp5523_firmware_loaded,
+	.run_engine         = lp5523_run_engine,
+	.dev_attr_group     = &lp5523_group,
+};
 
-static int lp5523_init_led(struct lp5523_led *led, struct device *dev,
-			   int chan, struct lp5523_platform_data *pdata,
-			   const char *chip_name)
+static int lp5523_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
 {
-	char name[32];
-	int res;
+	int ret;
+	struct lp55xx_chip *chip;
+	struct lp55xx_led *led;
+	struct lp55xx_platform_data *pdata = client->dev.platform_data;
 
-	if (chan >= LP5523_LEDS)
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
 		return -EINVAL;
-
-	if (pdata->led_config[chan].led_current) {
-		led->led_current = pdata->led_config[chan].led_current;
-		led->max_current = pdata->led_config[chan].max_current;
-		led->chan_nr = pdata->led_config[chan].chan_nr;
-
-		if (led->chan_nr >= LP5523_LEDS) {
-			dev_err(dev, "Use channel numbers between 0 and %d\n",
-				LP5523_LEDS - 1);
-			return -EINVAL;
-		}
-
-		if (pdata->led_config[chan].name) {
-			led->cdev.name = pdata->led_config[chan].name;
-		} else {
-			snprintf(name, sizeof(name), "%s:channel%d",
-				pdata->label ? : chip_name, chan);
-			led->cdev.name = name;
-		}
-
-		led->cdev.brightness_set = lp5523_set_brightness;
-		res = led_classdev_register(dev, &led->cdev);
-		if (res < 0) {
-			dev_err(dev, "couldn't register led on channel %d\n",
-				chan);
-			return res;
-		}
-		res = sysfs_create_group(&led->cdev.dev->kobj,
-				&lp5523_led_attribute_group);
-		if (res < 0) {
-			dev_err(dev, "couldn't register current attribute\n");
-			led_classdev_unregister(&led->cdev);
-			return res;
-		}
-	} else {
-		led->led_current = 0;
 	}
-	return 0;
-}
-
-static int lp5523_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct lp5523_chip		*chip;
-	struct lp5523_platform_data	*pdata;
-	int ret, i, led;
 
 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, chip);
-	chip->client = client;
+	led = devm_kzalloc(&client->dev,
+			sizeof(*led) * pdata->num_channels, GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
 
-	pdata = client->dev.platform_data;
-
-	if (!pdata) {
-		dev_err(&client->dev, "no platform data\n");
-		return -EINVAL;
-	}
+	chip->cl = client;
+	chip->pdata = pdata;
+	chip->cfg = &lp5523_cfg;
 
 	mutex_init(&chip->lock);
 
-	chip->pdata   = pdata;
+	i2c_set_clientdata(client, led);
 
-	if (pdata->setup_resources) {
-		ret = pdata->setup_resources();
-		if (ret < 0)
-			return ret;
-	}
-
-	if (pdata->enable) {
-		pdata->enable(0);
-		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
-		pdata->enable(1);
-		usleep_range(1000, 2000); /* 500us abs min. */
-	}
-
-	lp5523_write(client, LP5523_REG_RESET, 0xff);
-	usleep_range(10000, 20000); /*
-				     * Exact value is not available. 10 - 20ms
-				     * appears to be enough for reset.
-				     */
-	ret = lp5523_detect(client);
+	ret = lp55xx_init_device(chip);
 	if (ret)
-		goto fail1;
+		goto err_init;
 
 	dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
 
-	/* Initialize engines */
-	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
-		ret = lp5523_init_engine(&chip->engines[i], i + 1);
-		if (ret) {
-			dev_err(&client->dev, "error initializing engine\n");
-			goto fail1;
-		}
-	}
-	ret = lp5523_configure(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "error configuring chip\n");
-		goto fail1;
-	}
-
-	/* Initialize leds */
-	chip->num_channels = pdata->num_channels;
-	chip->num_leds = 0;
-	led = 0;
-	for (i = 0; i < pdata->num_channels; i++) {
-		/* Do not initialize channels that are not connected */
-		if (pdata->led_config[i].led_current == 0)
-			continue;
-
-		INIT_WORK(&chip->leds[led].brightness_work,
-			lp5523_led_brightness_work);
-
-		ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata,
-				id->name);
-		if (ret) {
-			dev_err(&client->dev, "error initializing leds\n");
-			goto fail2;
-		}
-		chip->num_leds++;
-
-		chip->leds[led].id = led;
-		/* Set LED current */
-		lp5523_write(client,
-			  LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
-			  chip->leds[led].led_current);
-
-		led++;
-	}
+	ret = lp55xx_register_leds(led, chip);
+	if (ret)
+		goto err_register_leds;
 
-	ret = lp5523_register_sysfs(client);
+	ret = lp55xx_register_sysfs(chip);
 	if (ret) {
 		dev_err(&client->dev, "registering sysfs failed\n");
-		goto fail2;
+		goto err_register_sysfs;
 	}
-	return ret;
-fail2:
-	for (i = 0; i < chip->num_leds; i++) {
-		led_classdev_unregister(&chip->leds[i].cdev);
-		flush_work(&chip->leds[i].brightness_work);
-	}
-fail1:
-	if (pdata->enable)
-		pdata->enable(0);
-	if (pdata->release_resources)
-		pdata->release_resources();
+
+	return 0;
+
+err_register_sysfs:
+	lp55xx_unregister_leds(led, chip);
+err_register_leds:
+	lp55xx_deinit_device(chip);
+err_init:
 	return ret;
 }
 
 static int lp5523_remove(struct i2c_client *client)
 {
-	struct lp5523_chip *chip = i2c_get_clientdata(client);
-	int i;
-
-	/* Disable engine mode */
-	lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+	struct lp55xx_led *led = i2c_get_clientdata(client);
+	struct lp55xx_chip *chip = led->chip;
 
-	lp5523_unregister_sysfs(client);
-
-	for (i = 0; i < chip->num_leds; i++) {
-		led_classdev_unregister(&chip->leds[i].cdev);
-		flush_work(&chip->leds[i].brightness_work);
-	}
+	lp5523_stop_engine(chip);
+	lp55xx_unregister_sysfs(chip);
+	lp55xx_unregister_leds(led, chip);
+	lp55xx_deinit_device(chip);
 
-	if (chip->pdata->enable)
-		chip->pdata->enable(0);
-	if (chip->pdata->release_resources)
-		chip->pdata->release_resources();
 	return 0;
 }
 
@@ -1049,5 +512,6 @@ static struct i2c_driver lp5523_driver = {
 module_i2c_driver(lp5523_driver);
 
 MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
 MODULE_DESCRIPTION("LP5523 LED engine");
 MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
new file mode 100644
index 00000000000..d9eb8415742
--- /dev/null
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -0,0 +1,523 @@
+/*
+ * LP5521/LP5523/LP55231 Common Driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from leds-lp5521.c, leds-lp5523.c
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_data/leds-lp55xx.h>
+
+#include "leds-lp55xx-common.h"
+
+static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp55xx_led, cdev);
+}
+
+static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev)
+{
+	return cdev_to_lp55xx_led(dev_get_drvdata(dev));
+}
+
+static void lp55xx_reset_device(struct lp55xx_chip *chip)
+{
+	struct lp55xx_device_config *cfg = chip->cfg;
+	u8 addr = cfg->reset.addr;
+	u8 val  = cfg->reset.val;
+
+	/* no error checking here because no ACK from the device after reset */
+	lp55xx_write(chip, addr, val);
+}
+
+static int lp55xx_detect_device(struct lp55xx_chip *chip)
+{
+	struct lp55xx_device_config *cfg = chip->cfg;
+	u8 addr = cfg->enable.addr;
+	u8 val  = cfg->enable.val;
+	int ret;
+
+	ret = lp55xx_write(chip, addr, val);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 2000);
+
+	ret = lp55xx_read(chip, addr, &val);
+	if (ret)
+		return ret;
+
+	if (val != cfg->enable.val)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int lp55xx_post_init_device(struct lp55xx_chip *chip)
+{
+	struct lp55xx_device_config *cfg = chip->cfg;
+
+	if (!cfg->post_init_device)
+		return 0;
+
+	return cfg->post_init_device(chip);
+}
+
+static ssize_t lp55xx_show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct lp55xx_led *led = dev_to_lp55xx_led(dev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t lp55xx_store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct lp55xx_led *led = dev_to_lp55xx_led(dev);
+	struct lp55xx_chip *chip = led->chip;
+	unsigned long curr;
+
+	if (kstrtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	if (!chip->cfg->set_led_current)
+		return len;
+
+	mutex_lock(&chip->lock);
+	chip->cfg->set_led_current(led, (u8)curr);
+	mutex_unlock(&chip->lock);
+
+	return len;
+}
+
+static ssize_t lp55xx_show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct lp55xx_led *led = dev_to_lp55xx_led(dev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current,
+		lp55xx_store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL);
+
+static struct attribute *lp55xx_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp55xx_led_attr_group = {
+	.attrs = lp55xx_led_attributes
+};
+
+static void lp55xx_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp55xx_led *led = cdev_to_lp55xx_led(cdev);
+
+	led->brightness = (u8)brightness;
+	schedule_work(&led->brightness_work);
+}
+
+static int lp55xx_init_led(struct lp55xx_led *led,
+			struct lp55xx_chip *chip, int chan)
+{
+	struct lp55xx_platform_data *pdata = chip->pdata;
+	struct lp55xx_device_config *cfg = chip->cfg;
+	struct device *dev = &chip->cl->dev;
+	char name[32];
+	int ret;
+	int max_channel = cfg->max_channel;
+
+	if (chan >= max_channel) {
+		dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel);
+		return -EINVAL;
+	}
+
+	if (pdata->led_config[chan].led_current == 0)
+		return 0;
+
+	led->led_current = pdata->led_config[chan].led_current;
+	led->max_current = pdata->led_config[chan].max_current;
+	led->chan_nr = pdata->led_config[chan].chan_nr;
+
+	if (led->chan_nr >= max_channel) {
+		dev_err(dev, "Use channel numbers between 0 and %d\n",
+			max_channel - 1);
+		return -EINVAL;
+	}
+
+	led->cdev.brightness_set = lp55xx_set_brightness;
+
+	if (pdata->led_config[chan].name) {
+		led->cdev.name = pdata->led_config[chan].name;
+	} else {
+		snprintf(name, sizeof(name), "%s:channel%d",
+			pdata->label ? : chip->cl->name, chan);
+		led->cdev.name = name;
+	}
+
+	/*
+	 * register led class device for each channel and
+	 * add device attributes
+	 */
+
+	ret = led_classdev_register(dev, &led->cdev);
+	if (ret) {
+		dev_err(dev, "led register err: %d\n", ret);
+		return ret;
+	}
+
+	ret = sysfs_create_group(&led->cdev.dev->kobj, &lp55xx_led_attr_group);
+	if (ret) {
+		dev_err(dev, "led sysfs err: %d\n", ret);
+		led_classdev_unregister(&led->cdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)
+{
+	struct lp55xx_chip *chip = context;
+	struct device *dev = &chip->cl->dev;
+
+	if (!fw) {
+		dev_err(dev, "firmware request failed\n");
+		goto out;
+	}
+
+	/* handling firmware data is chip dependent */
+	mutex_lock(&chip->lock);
+
+	chip->fw = fw;
+	if (chip->cfg->firmware_cb)
+		chip->cfg->firmware_cb(chip);
+
+	mutex_unlock(&chip->lock);
+
+out:
+	/* firmware should be released for other channel use */
+	release_firmware(chip->fw);
+}
+
+static int lp55xx_request_firmware(struct lp55xx_chip *chip)
+{
+	const char *name = chip->cl->name;
+	struct device *dev = &chip->cl->dev;
+
+	return request_firmware_nowait(THIS_MODULE, true, name, dev,
+				GFP_KERNEL, chip, lp55xx_firmware_loaded);
+}
+
+static ssize_t lp55xx_show_engine_select(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+
+	return sprintf(buf, "%d\n", chip->engine_idx);
+}
+
+static ssize_t lp55xx_store_engine_select(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	unsigned long val;
+	int ret;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	/* select the engine to be run */
+
+	switch (val) {
+	case LP55XX_ENGINE_1:
+	case LP55XX_ENGINE_2:
+	case LP55XX_ENGINE_3:
+		mutex_lock(&chip->lock);
+		chip->engine_idx = val;
+		ret = lp55xx_request_firmware(chip);
+		mutex_unlock(&chip->lock);
+		break;
+	default:
+		dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val);
+		return -EINVAL;
+	}
+
+	if (ret) {
+		dev_err(dev, "request firmware err: %d\n", ret);
+		return ret;
+	}
+
+	return len;
+}
+
+static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start)
+{
+	if (chip->cfg->run_engine)
+		chip->cfg->run_engine(chip, start);
+}
+
+static ssize_t lp55xx_store_engine_run(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	/* run or stop the selected engine */
+
+	if (val <= 0) {
+		lp55xx_run_engine(chip, false);
+		return len;
+	}
+
+	mutex_lock(&chip->lock);
+	lp55xx_run_engine(chip, true);
+	mutex_unlock(&chip->lock);
+
+	return len;
+}
+
+static DEVICE_ATTR(select_engine, S_IRUGO | S_IWUSR,
+		   lp55xx_show_engine_select, lp55xx_store_engine_select);
+static DEVICE_ATTR(run_engine, S_IWUSR, NULL, lp55xx_store_engine_run);
+
+static struct attribute *lp55xx_engine_attributes[] = {
+	&dev_attr_select_engine.attr,
+	&dev_attr_run_engine.attr,
+	NULL,
+};
+
+static const struct attribute_group lp55xx_engine_attr_group = {
+	.attrs = lp55xx_engine_attributes,
+};
+
+int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(chip->cl, reg, val);
+}
+EXPORT_SYMBOL_GPL(lp55xx_write);
+
+int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(chip->cl, reg);
+	if (ret < 0)
+		return ret;
+
+	*val = ret;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(lp55xx_read);
+
+int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val)
+{
+	int ret;
+	u8 tmp;
+
+	ret = lp55xx_read(chip, reg, &tmp);
+	if (ret)
+		return ret;
+
+	tmp &= ~mask;
+	tmp |= val & mask;
+
+	return lp55xx_write(chip, reg, tmp);
+}
+EXPORT_SYMBOL_GPL(lp55xx_update_bits);
+
+int lp55xx_init_device(struct lp55xx_chip *chip)
+{
+	struct lp55xx_platform_data *pdata;
+	struct lp55xx_device_config *cfg;
+	struct device *dev = &chip->cl->dev;
+	int ret = 0;
+
+	WARN_ON(!chip);
+
+	pdata = chip->pdata;
+	cfg = chip->cfg;
+
+	if (!pdata || !cfg)
+		return -EINVAL;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0) {
+			dev_err(dev, "setup resoure err: %d\n", ret);
+			goto err;
+		}
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+		pdata->enable(1);
+		usleep_range(1000, 2000); /* 500us abs min. */
+	}
+
+	lp55xx_reset_device(chip);
+
+	/*
+	 * Exact value is not available. 10 - 20ms
+	 * appears to be enough for reset.
+	 */
+	usleep_range(10000, 20000);
+
+	ret = lp55xx_detect_device(chip);
+	if (ret) {
+		dev_err(dev, "device detection err: %d\n", ret);
+		goto err;
+	}
+
+	/* chip specific initialization */
+	ret = lp55xx_post_init_device(chip);
+	if (ret) {
+		dev_err(dev, "post init device err: %d\n", ret);
+		goto err_post_init;
+	}
+
+	return 0;
+
+err_post_init:
+	lp55xx_deinit_device(chip);
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lp55xx_init_device);
+
+void lp55xx_deinit_device(struct lp55xx_chip *chip)
+{
+	struct lp55xx_platform_data *pdata = chip->pdata;
+
+	if (pdata->enable)
+		pdata->enable(0);
+
+	if (pdata->release_resources)
+		pdata->release_resources();
+}
+EXPORT_SYMBOL_GPL(lp55xx_deinit_device);
+
+int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
+{
+	struct lp55xx_platform_data *pdata = chip->pdata;
+	struct lp55xx_device_config *cfg = chip->cfg;
+	int num_channels = pdata->num_channels;
+	struct lp55xx_led *each;
+	u8 led_current;
+	int ret;
+	int i;
+
+	if (!cfg->brightness_work_fn) {
+		dev_err(&chip->cl->dev, "empty brightness configuration\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_channels; i++) {
+
+		/* do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		led_current = pdata->led_config[i].led_current;
+		each = led + i;
+		ret = lp55xx_init_led(each, chip, i);
+		if (ret)
+			goto err_init_led;
+
+		INIT_WORK(&each->brightness_work, cfg->brightness_work_fn);
+
+		chip->num_leds++;
+		each->chip = chip;
+
+		/* setting led current at each channel */
+		if (cfg->set_led_current)
+			cfg->set_led_current(each, led_current);
+	}
+
+	return 0;
+
+err_init_led:
+	lp55xx_unregister_leds(led, chip);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lp55xx_register_leds);
+
+void lp55xx_unregister_leds(struct lp55xx_led *led, struct lp55xx_chip *chip)
+{
+	int i;
+	struct lp55xx_led *each;
+
+	for (i = 0; i < chip->num_leds; i++) {
+		each = led + i;
+		led_classdev_unregister(&each->cdev);
+		flush_work(&each->brightness_work);
+	}
+}
+EXPORT_SYMBOL_GPL(lp55xx_unregister_leds);
+
+int lp55xx_register_sysfs(struct lp55xx_chip *chip)
+{
+	struct device *dev = &chip->cl->dev;
+	struct lp55xx_device_config *cfg = chip->cfg;
+	int ret;
+
+	if (!cfg->run_engine || !cfg->firmware_cb)
+		goto dev_specific_attrs;
+
+	ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group);
+	if (ret)
+		return ret;
+
+dev_specific_attrs:
+	return cfg->dev_attr_group ?
+		sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0;
+}
+EXPORT_SYMBOL_GPL(lp55xx_register_sysfs);
+
+void lp55xx_unregister_sysfs(struct lp55xx_chip *chip)
+{
+	struct device *dev = &chip->cl->dev;
+	struct lp55xx_device_config *cfg = chip->cfg;
+
+	if (cfg->dev_attr_group)
+		sysfs_remove_group(&dev->kobj, cfg->dev_attr_group);
+
+	sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group);
+}
+EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs);
+
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>");
+MODULE_DESCRIPTION("LP55xx Common Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h
new file mode 100644
index 00000000000..ece4761a130
--- /dev/null
+++ b/drivers/leds/leds-lp55xx-common.h
@@ -0,0 +1,134 @@
+/*
+ * LP55XX Common Driver Header
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * Derived from leds-lp5521.c, leds-lp5523.c
+ */
+
+#ifndef _LEDS_LP55XX_COMMON_H
+#define _LEDS_LP55XX_COMMON_H
+
+enum lp55xx_engine_index {
+	LP55XX_ENGINE_INVALID,
+	LP55XX_ENGINE_1,
+	LP55XX_ENGINE_2,
+	LP55XX_ENGINE_3,
+};
+
+struct lp55xx_led;
+struct lp55xx_chip;
+
+/*
+ * struct lp55xx_reg
+ * @addr : Register address
+ * @val  : Register value
+ */
+struct lp55xx_reg {
+	u8 addr;
+	u8 val;
+};
+
+/*
+ * struct lp55xx_device_config
+ * @reset              : Chip specific reset command
+ * @enable             : Chip specific enable command
+ * @max_channel        : Maximum number of channels
+ * @post_init_device   : Chip specific initialization code
+ * @brightness_work_fn : Brightness work function
+ * @set_led_current    : LED current set function
+ * @firmware_cb        : Call function when the firmware is loaded
+ * @run_engine         : Run internal engine for pattern
+ * @dev_attr_group     : Device specific attributes
+ */
+struct lp55xx_device_config {
+	const struct lp55xx_reg reset;
+	const struct lp55xx_reg enable;
+	const int max_channel;
+
+	/* define if the device has specific initialization process */
+	int (*post_init_device) (struct lp55xx_chip *chip);
+
+	/* access brightness register */
+	void (*brightness_work_fn)(struct work_struct *work);
+
+	/* current setting function */
+	void (*set_led_current) (struct lp55xx_led *led, u8 led_current);
+
+	/* access program memory when the firmware is loaded */
+	void (*firmware_cb)(struct lp55xx_chip *chip);
+
+	/* used for running firmware LED patterns */
+	void (*run_engine) (struct lp55xx_chip *chip, bool start);
+
+	/* additional device specific attributes */
+	const struct attribute_group *dev_attr_group;
+};
+
+/*
+ * struct lp55xx_chip
+ * @cl         : I2C communication for access registers
+ * @pdata      : Platform specific data
+ * @lock       : Lock for user-space interface
+ * @num_leds   : Number of registered LEDs
+ * @cfg        : Device specific configuration data
+ * @engine_idx : Selected engine number
+ * @fw         : Firmware data for running a LED pattern
+ */
+struct lp55xx_chip {
+	struct i2c_client *cl;
+	struct lp55xx_platform_data *pdata;
+	struct mutex lock;	/* lock for user-space interface */
+	int num_leds;
+	struct lp55xx_device_config *cfg;
+	enum lp55xx_engine_index engine_idx;
+	const struct firmware *fw;
+};
+
+/*
+ * struct lp55xx_led
+ * @chan_nr         : Channel number
+ * @cdev            : LED class device
+ * @led_current     : Current setting at each led channel
+ * @max_current     : Maximun current at each led channel
+ * @brightness_work : Workqueue for brightness control
+ * @brightness      : Brightness value
+ * @chip            : The lp55xx chip data
+ */
+struct lp55xx_led {
+	int chan_nr;
+	struct led_classdev cdev;
+	u8 led_current;
+	u8 max_current;
+	struct work_struct brightness_work;
+	u8 brightness;
+	struct lp55xx_chip *chip;
+};
+
+/* register access */
+extern int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val);
+extern int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val);
+extern int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg,
+			u8 mask, u8 val);
+
+/* common device init/deinit functions */
+extern int lp55xx_init_device(struct lp55xx_chip *chip);
+extern void lp55xx_deinit_device(struct lp55xx_chip *chip);
+
+/* common LED class device functions */
+extern int lp55xx_register_leds(struct lp55xx_led *led,
+				struct lp55xx_chip *chip);
+extern void lp55xx_unregister_leds(struct lp55xx_led *led,
+				struct lp55xx_chip *chip);
+
+/* common device attributes functions */
+extern int lp55xx_register_sysfs(struct lp55xx_chip *chip);
+extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip);
+
+#endif /* _LEDS_LP55XX_COMMON_H */
diff --git a/drivers/leds/leds-lp8788.c b/drivers/leds/leds-lp8788.c
index 4353942c5fd..7c2cb384e7a 100644
--- a/drivers/leds/leds-lp8788.c
+++ b/drivers/leds/leds-lp8788.c
@@ -130,9 +130,10 @@ static int lp8788_led_probe(struct platform_device *pdev)
 	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 	struct lp8788_led_platform_data *led_pdata;
 	struct lp8788_led *led;
+	struct device *dev = &pdev->dev;
 	int ret;
 
-	led = devm_kzalloc(lp->dev, sizeof(struct lp8788_led), GFP_KERNEL);
+	led = devm_kzalloc(dev, sizeof(struct lp8788_led), GFP_KERNEL);
 	if (!led)
 		return -ENOMEM;
 
@@ -154,13 +155,13 @@ static int lp8788_led_probe(struct platform_device *pdev)
 
 	ret = lp8788_led_init_device(led, led_pdata);
 	if (ret) {
-		dev_err(lp->dev, "led init device err: %d\n", ret);
+		dev_err(dev, "led init device err: %d\n", ret);
 		return ret;
 	}
 
-	ret = led_classdev_register(lp->dev, &led->led_dev);
+	ret = led_classdev_register(dev, &led->led_dev);
 	if (ret) {
-		dev_err(lp->dev, "led register err: %d\n", ret);
+		dev_err(dev, "led register err: %d\n", ret);
 		return ret;
 	}
 
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index cee8a5b483a..0c597bdd23f 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -186,7 +186,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
 	int err = 0;
 
 	if (*delay_on == 0 && *delay_off == 0) {
-	/* led subsystem ask us for a blink rate */
+		/* led subsystem ask us for a blink rate */
 		*delay_on = 1000;
 		*delay_off = 1000;
 	}
@@ -311,7 +311,6 @@ static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
 			break;
 		case PCA9532_TYPE_N2100_BEEP:
 			if (data->idev != NULL) {
-				input_unregister_device(data->idev);
 				cancel_work_sync(&data->work);
 				data->idev = NULL;
 			}
@@ -382,7 +381,7 @@ static int pca9532_configure(struct i2c_client *client,
 			BUG_ON(data->idev);
 			led->state = PCA9532_PWM1;
 			pca9532_setled(led);
-			data->idev = input_allocate_device();
+			data->idev = devm_input_allocate_device(&client->dev);
 			if (data->idev == NULL) {
 				err = -ENOMEM;
 				goto exit;
@@ -401,7 +400,6 @@ static int pca9532_configure(struct i2c_client *client,
 			INIT_WORK(&data->work, pca9532_input_work);
 			err = input_register_device(data->idev);
 			if (err) {
-				input_free_device(data->idev);
 				cancel_work_sync(&data->work);
 				data->idev = NULL;
 				goto exit;
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 2157524f277..a1ea5f6a8d3 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/fb.h>
 #include <linux/leds.h>
 #include <linux/err.h>
@@ -30,6 +31,11 @@ struct led_pwm_data {
 	unsigned int		period;
 };
 
+struct led_pwm_priv {
+	int num_leds;
+	struct led_pwm_data leds[0];
+};
+
 static void led_pwm_set(struct led_classdev *led_cdev,
 	enum led_brightness brightness)
 {
@@ -47,88 +53,152 @@ static void led_pwm_set(struct led_classdev *led_cdev,
 	}
 }
 
-static int led_pwm_probe(struct platform_device *pdev)
+static inline size_t sizeof_pwm_leds_priv(int num_leds)
 {
-	struct led_pwm_platform_data *pdata = pdev->dev.platform_data;
-	struct led_pwm *cur_led;
-	struct led_pwm_data *leds_data, *led_dat;
-	int i, ret = 0;
+	return sizeof(struct led_pwm_priv) +
+		      (sizeof(struct led_pwm_data) * num_leds);
+}
+
+static struct led_pwm_priv *led_pwm_create_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *child;
+	struct led_pwm_priv *priv;
+	int count, ret;
 
-	if (!pdata)
-		return -EBUSY;
+	/* count LEDs in this device, so we know how much to allocate */
+	count = of_get_child_count(node);
+	if (!count)
+		return NULL;
 
-	leds_data = devm_kzalloc(&pdev->dev,
-			sizeof(struct led_pwm_data) * pdata->num_leds,
-				GFP_KERNEL);
-	if (!leds_data)
-		return -ENOMEM;
+	priv = devm_kzalloc(&pdev->dev, sizeof_pwm_leds_priv(count),
+			    GFP_KERNEL);
+	if (!priv)
+		return NULL;
 
-	for (i = 0; i < pdata->num_leds; i++) {
-		cur_led = &pdata->leds[i];
-		led_dat = &leds_data[i];
+	for_each_child_of_node(node, child) {
+		struct led_pwm_data *led_dat = &priv->leds[priv->num_leds];
 
-		led_dat->pwm = pwm_request(cur_led->pwm_id,
-				cur_led->name);
+		led_dat->cdev.name = of_get_property(child, "label",
+						     NULL) ? : child->name;
+
+		led_dat->pwm = devm_of_pwm_get(&pdev->dev, child, NULL);
 		if (IS_ERR(led_dat->pwm)) {
-			ret = PTR_ERR(led_dat->pwm);
-			dev_err(&pdev->dev, "unable to request PWM %d\n",
-					cur_led->pwm_id);
+			dev_err(&pdev->dev, "unable to request PWM for %s\n",
+				led_dat->cdev.name);
 			goto err;
 		}
+		/* Get the period from PWM core when n*/
+		led_dat->period = pwm_get_period(led_dat->pwm);
+
+		led_dat->cdev.default_trigger = of_get_property(child,
+						"linux,default-trigger", NULL);
+		of_property_read_u32(child, "max-brightness",
+				     &led_dat->cdev.max_brightness);
 
-		led_dat->cdev.name = cur_led->name;
-		led_dat->cdev.default_trigger = cur_led->default_trigger;
-		led_dat->active_low = cur_led->active_low;
-		led_dat->period = cur_led->pwm_period_ns;
 		led_dat->cdev.brightness_set = led_pwm_set;
 		led_dat->cdev.brightness = LED_OFF;
-		led_dat->cdev.max_brightness = cur_led->max_brightness;
 		led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
 
 		ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
 		if (ret < 0) {
-			pwm_free(led_dat->pwm);
+			dev_err(&pdev->dev, "failed to register for %s\n",
+				led_dat->cdev.name);
+			of_node_put(child);
 			goto err;
 		}
+		priv->num_leds++;
 	}
 
-	platform_set_drvdata(pdev, leds_data);
+	return priv;
+err:
+	while (priv->num_leds--)
+		led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
 
-	return 0;
+	return NULL;
+}
 
-err:
-	if (i > 0) {
-		for (i = i - 1; i >= 0; i--) {
-			led_classdev_unregister(&leds_data[i].cdev);
-			pwm_free(leds_data[i].pwm);
+static int led_pwm_probe(struct platform_device *pdev)
+{
+	struct led_pwm_platform_data *pdata = pdev->dev.platform_data;
+	struct led_pwm_priv *priv;
+	int i, ret = 0;
+
+	if (pdata && pdata->num_leds) {
+		priv = devm_kzalloc(&pdev->dev,
+				    sizeof_pwm_leds_priv(pdata->num_leds),
+				    GFP_KERNEL);
+		if (!priv)
+			return -ENOMEM;
+
+		for (i = 0; i < pdata->num_leds; i++) {
+			struct led_pwm *cur_led = &pdata->leds[i];
+			struct led_pwm_data *led_dat = &priv->leds[i];
+
+			led_dat->pwm = devm_pwm_get(&pdev->dev, cur_led->name);
+			if (IS_ERR(led_dat->pwm)) {
+				ret = PTR_ERR(led_dat->pwm);
+				dev_err(&pdev->dev,
+					"unable to request PWM for %s\n",
+					cur_led->name);
+				goto err;
+			}
+
+			led_dat->cdev.name = cur_led->name;
+			led_dat->cdev.default_trigger = cur_led->default_trigger;
+			led_dat->active_low = cur_led->active_low;
+			led_dat->period = cur_led->pwm_period_ns;
+			led_dat->cdev.brightness_set = led_pwm_set;
+			led_dat->cdev.brightness = LED_OFF;
+			led_dat->cdev.max_brightness = cur_led->max_brightness;
+			led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+
+			ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
+			if (ret < 0)
+				goto err;
 		}
+		priv->num_leds = pdata->num_leds;
+	} else {
+		priv = led_pwm_create_of(pdev);
+		if (!priv)
+			return -ENODEV;
 	}
 
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+err:
+	while (i--)
+		led_classdev_unregister(&priv->leds[i].cdev);
+
 	return ret;
 }
 
 static int led_pwm_remove(struct platform_device *pdev)
 {
+	struct led_pwm_priv *priv = platform_get_drvdata(pdev);
 	int i;
-	struct led_pwm_platform_data *pdata = pdev->dev.platform_data;
-	struct led_pwm_data *leds_data;
 
-	leds_data = platform_get_drvdata(pdev);
-
-	for (i = 0; i < pdata->num_leds; i++) {
-		led_classdev_unregister(&leds_data[i].cdev);
-		pwm_free(leds_data[i].pwm);
-	}
+	for (i = 0; i < priv->num_leds; i++)
+		led_classdev_unregister(&priv->leds[i].cdev);
 
 	return 0;
 }
 
+static const struct of_device_id of_pwm_leds_match[] = {
+	{ .compatible = "pwm-leds", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pwm_leds_match);
+
 static struct platform_driver led_pwm_driver = {
 	.probe		= led_pwm_probe,
 	.remove		= led_pwm_remove,
 	.driver		= {
 		.name	= "leds_pwm",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(of_pwm_leds_match),
 	},
 };
 
diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c
index e0fff1ca592..d3c2b7e68fb 100644
--- a/drivers/leds/leds-renesas-tpu.c
+++ b/drivers/leds/leds-renesas-tpu.c
@@ -133,24 +133,24 @@ static int r_tpu_enable(struct r_tpu_priv *p, enum led_brightness brightness)
 	rate = clk_get_rate(p->clk);
 
 	/* pick the lowest acceptable rate */
-	for (k = 0; k < ARRAY_SIZE(prescaler); k++)
-		if ((rate / prescaler[k]) < p->min_rate)
+	for (k = ARRAY_SIZE(prescaler) - 1; k >= 0; k--)
+		if ((rate / prescaler[k]) >= p->min_rate)
 			break;
 
-	if (!k) {
+	if (k < 0) {
 		dev_err(&p->pdev->dev, "clock rate mismatch\n");
 		goto err0;
 	}
 	dev_dbg(&p->pdev->dev, "rate = %lu, prescaler %u\n",
-		rate, prescaler[k - 1]);
+		rate, prescaler[k]);
 
 	/* clear TCNT on TGRB match, count on rising edge, set prescaler */
-	r_tpu_write(p, TCR, 0x0040 | (k - 1));
+	r_tpu_write(p, TCR, 0x0040 | k);
 
 	/* output 0 until TGRA, output 1 until TGRB */
 	r_tpu_write(p, TIOR, 0x0002);
 
-	rate /= prescaler[k - 1] * p->refresh_rate;
+	rate /= prescaler[k] * p->refresh_rate;
 	r_tpu_write(p, TGRB, rate);
 	dev_dbg(&p->pdev->dev, "TRGB = 0x%04lx\n", rate);
 
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index ec9b287ecfb..64e204e714f 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -63,8 +63,7 @@ MODULE_LICENSE("GPL");
 /*
  * PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
  */
-static const struct pci_device_id ich7_lpc_pci_id[] =
-{
+static DEFINE_PCI_DEVICE_TABLE(ich7_lpc_pci_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c
index 07ff5a3a6ce..89792990088 100644
--- a/drivers/leds/leds-sunfire.c
+++ b/drivers/leds/leds-sunfire.c
@@ -3,6 +3,8 @@
  * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -14,9 +16,6 @@
 #include <asm/fhc.h>
 #include <asm/upa.h>
 
-#define DRIVER_NAME	"leds-sunfire"
-#define PFX		DRIVER_NAME ": "
-
 MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
 MODULE_DESCRIPTION("Sun Fire LED driver");
 MODULE_LICENSE("GPL");
@@ -130,14 +129,14 @@ static int sunfire_led_generic_probe(struct platform_device *pdev,
 	int i, err;
 
 	if (pdev->num_resources != 1) {
-		printk(KERN_ERR PFX "Wrong number of resources %d, should be 1\n",
+		dev_err(&pdev->dev, "Wrong number of resources %d, should be 1\n",
 		       pdev->num_resources);
 		return -EINVAL;
 	}
 
 	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
 	if (!p) {
-		printk(KERN_ERR PFX "Could not allocate struct sunfire_drvdata\n");
+		dev_err(&pdev->dev, "Could not allocate struct sunfire_drvdata\n");
 		return -ENOMEM;
 	}
 
@@ -152,7 +151,7 @@ static int sunfire_led_generic_probe(struct platform_device *pdev,
 
 		err = led_classdev_register(&pdev->dev, lp);
 		if (err) {
-			printk(KERN_ERR PFX "Could not register %s LED\n",
+			dev_err(&pdev->dev, "Could not register %s LED\n",
 			       lp->name);
 			for (i--; i >= 0; i--)
 				led_classdev_unregister(&p->leds[i].led_cdev);
@@ -188,7 +187,7 @@ static struct led_type clockboard_led_types[NUM_LEDS_PER_BOARD] = {
 	{
 		.name		= "clockboard-right",
 		.handler	= clockboard_right_set,
-		.default_trigger= "heartbeat",
+		.default_trigger = "heartbeat",
 	},
 };
 
@@ -209,7 +208,7 @@ static struct led_type fhc_led_types[NUM_LEDS_PER_BOARD] = {
 	{
 		.name		= "fhc-right",
 		.handler	= fhc_right_set,
-		.default_trigger= "heartbeat",
+		.default_trigger = "heartbeat",
 	},
 };
 
@@ -244,13 +243,13 @@ static int __init sunfire_leds_init(void)
 	int err = platform_driver_register(&sunfire_clockboard_led_driver);
 
 	if (err) {
-		printk(KERN_ERR PFX "Could not register clock board LED driver\n");
+		pr_err("Could not register clock board LED driver\n");
 		return err;
 	}
 
 	err = platform_driver_register(&sunfire_fhc_led_driver);
 	if (err) {
-		printk(KERN_ERR PFX "Could not register FHC LED driver\n");
+		pr_err("Could not register FHC LED driver\n");
 		platform_driver_unregister(&sunfire_clockboard_led_driver);
 	}
 
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
index b26a63bae16..070ba0741b2 100644
--- a/drivers/leds/leds-tca6507.c
+++ b/drivers/leds/leds-tca6507.c
@@ -667,8 +667,68 @@ static void tca6507_remove_gpio(struct tca6507_chip *tca)
 }
 #endif /* CONFIG_GPIOLIB */
 
+#ifdef CONFIG_OF
+static struct tca6507_platform_data *
+tca6507_led_dt_init(struct i2c_client *client)
+{
+	struct device_node *np = client->dev.of_node, *child;
+	struct tca6507_platform_data *pdata;
+	struct led_info *tca_leds;
+	int count;
+
+	count = of_get_child_count(np);
+	if (!count || count > NUM_LEDS)
+		return ERR_PTR(-ENODEV);
+
+	tca_leds = devm_kzalloc(&client->dev,
+			sizeof(struct led_info) * count, GFP_KERNEL);
+	if (!tca_leds)
+		return ERR_PTR(-ENOMEM);
+
+	for_each_child_of_node(np, child) {
+		struct led_info led;
+		u32 reg;
+		int ret;
+
+		led.name =
+			of_get_property(child, "label", NULL) ? : child->name;
+		led.default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
+
+		ret = of_property_read_u32(child, "reg", &reg);
+		if (ret != 0)
+			continue;
+
+		tca_leds[reg] = led;
+	}
+	pdata = devm_kzalloc(&client->dev,
+			sizeof(struct tca6507_platform_data), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->leds.leds = tca_leds;
+	pdata->leds.num_leds = count;
+
+	return pdata;
+}
+
+static const struct of_device_id of_tca6507_leds_match[] = {
+	{ .compatible = "ti,tca6507", },
+	{},
+};
+
+#else
+static struct tca6507_platform_data *
+tca6507_led_dt_init(struct i2c_client *client)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+#define of_tca6507_leds_match NULL
+#endif
+
 static int tca6507_probe(struct i2c_client *client,
-				   const struct i2c_device_id *id)
+		const struct i2c_device_id *id)
 {
 	struct tca6507_chip *tca;
 	struct i2c_adapter *adapter;
@@ -683,9 +743,12 @@ static int tca6507_probe(struct i2c_client *client,
 		return -EIO;
 
 	if (!pdata || pdata->leds.num_leds != NUM_LEDS) {
-		dev_err(&client->dev, "Need %d entries in platform-data list\n",
-			NUM_LEDS);
-		return -ENODEV;
+		pdata = tca6507_led_dt_init(client);
+		if (IS_ERR(pdata)) {
+			dev_err(&client->dev, "Need %d entries in platform-data list\n",
+				NUM_LEDS);
+			return PTR_ERR(pdata);
+		}
 	}
 	tca = devm_kzalloc(&client->dev, sizeof(*tca), GFP_KERNEL);
 	if (!tca)
@@ -750,6 +813,7 @@ static struct i2c_driver tca6507_driver = {
 	.driver   = {
 		.name    = "leds-tca6507",
 		.owner   = THIS_MODULE,
+		.of_match_table = of_tca6507_leds_match,
 	},
 	.probe    = tca6507_probe,
 	.remove   = tca6507_remove,
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
index 74a24cf897c..6bd5c679d87 100644
--- a/drivers/leds/leds-wm831x-status.c
+++ b/drivers/leds/leds-wm831x-status.c
@@ -157,7 +157,7 @@ static int wm831x_status_blink_set(struct led_classdev *led_cdev,
 	return ret;
 }
 
-static const char *led_src_texts[] = {
+static const char * const led_src_texts[] = {
 	"otp",
 	"power",
 	"charger",
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 903138b1884..4a13da48fef 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -471,7 +471,7 @@ static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
 }
 
 /**
- * of_pwm_request() - request a PWM via the PWM framework
+ * of_pwm_get() - request a PWM via the PWM framework
  * @np: device node to get the PWM from
  * @con_id: consumer name
  *
@@ -486,8 +486,7 @@ static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
  * becomes mandatory for devices that look up the PWM device via the con_id
  * parameter.
  */
-static struct pwm_device *of_pwm_request(struct device_node *np,
-					 const char *con_id)
+struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id)
 {
 	struct pwm_device *pwm = NULL;
 	struct of_phandle_args args;
@@ -545,6 +544,7 @@ put:
 
 	return pwm;
 }
+EXPORT_SYMBOL_GPL(of_pwm_get);
 
 /**
  * pwm_add_table() - register PWM device consumers
@@ -587,7 +587,7 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id)
 
 	/* look up via DT first */
 	if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
-		return of_pwm_request(dev->of_node, con_id);
+		return of_pwm_get(dev->of_node, con_id);
 
 	/*
 	 * We look up the provider in the static table typically provided by
@@ -708,6 +708,36 @@ struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id)
 }
 EXPORT_SYMBOL_GPL(devm_pwm_get);
 
+/**
+ * devm_of_pwm_get() - resource managed of_pwm_get()
+ * @dev: device for PWM consumer
+ * @np: device node to get the PWM from
+ * @con_id: consumer name
+ *
+ * This function performs like of_pwm_get() but the acquired PWM device will
+ * automatically be released on driver detach.
+ */
+struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
+				   const char *con_id)
+{
+	struct pwm_device **ptr, *pwm;
+
+	ptr = devres_alloc(devm_pwm_release, sizeof(**ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	pwm = of_pwm_get(np, con_id);
+	if (!IS_ERR(pwm)) {
+		*ptr = pwm;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return pwm;
+}
+EXPORT_SYMBOL_GPL(devm_of_pwm_get);
+
 static int devm_pwm_match(struct device *dev, void *res, void *data)
 {
 	struct pwm_device **p = res;
diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
deleted file mode 100644
index 3f071ec019b..00000000000
--- a/include/linux/leds-lp5521.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * LP5521 LED chip driver.
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_LP5521_H
-#define __LINUX_LP5521_H
-
-/* See Documentation/leds/leds-lp5521.txt */
-
-struct lp5521_led_config {
-	char		*name;
-	u8		chan_nr;
-	u8		led_current; /* mA x10, 0 if led is not connected */
-	u8		max_current;
-};
-
-struct lp5521_led_pattern {
-	u8 *r;
-	u8 *g;
-	u8 *b;
-	u8 size_r;
-	u8 size_g;
-	u8 size_b;
-};
-
-#define LP5521_CLOCK_AUTO	0
-#define LP5521_CLOCK_INT	1
-#define LP5521_CLOCK_EXT	2
-
-/* Bits in CONFIG register */
-#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
-#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
-#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
-#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
-#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
-#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
-#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
-#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
-#define LP5521_CLK_INT			1	/* Internal clock */
-#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
-
-struct lp5521_platform_data {
-	struct lp5521_led_config *led_config;
-	u8	num_channels;
-	u8	clock_mode;
-	int	(*setup_resources)(void);
-	void	(*release_resources)(void);
-	void	(*enable)(bool state);
-	const char *label;
-	u8	update_config;
-	struct lp5521_led_pattern *patterns;
-	int num_patterns;
-};
-
-#endif /* __LINUX_LP5521_H */
diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h
deleted file mode 100644
index 727877fb406..00000000000
--- a/include/linux/leds-lp5523.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * LP5523 LED Driver
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_LP5523_H
-#define __LINUX_LP5523_H
-
-/* See Documentation/leds/leds-lp5523.txt */
-
-struct lp5523_led_config {
-	const char	*name;
-	u8		chan_nr;
-	u8		led_current; /* mA x10, 0 if led is not connected */
-	u8		max_current;
-};
-
-#define LP5523_CLOCK_AUTO	0
-#define LP5523_CLOCK_INT	1
-#define LP5523_CLOCK_EXT	2
-
-struct lp5523_platform_data {
-	struct lp5523_led_config *led_config;
-	u8	num_channels;
-	u8	clock_mode;
-	int	(*setup_resources)(void);
-	void	(*release_resources)(void);
-	void	(*enable)(bool state);
-	const	char *label;
-};
-
-#endif /* __LINUX_LP5523_H */
diff --git a/include/linux/leds_pwm.h b/include/linux/leds_pwm.h
index 33a07116748..a65e9646e4b 100644
--- a/include/linux/leds_pwm.h
+++ b/include/linux/leds_pwm.h
@@ -7,7 +7,7 @@
 struct led_pwm {
 	const char	*name;
 	const char	*default_trigger;
-	unsigned	pwm_id;
+	unsigned	pwm_id __deprecated;
 	u8 		active_low;
 	unsigned 	max_brightness;
 	unsigned	pwm_period_ns;
diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h
new file mode 100644
index 00000000000..1509570d5a3
--- /dev/null
+++ b/include/linux/platform_data/leds-lp55xx.h
@@ -0,0 +1,87 @@
+/*
+ * LP55XX Platform Data Header
+ *
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * Derived from leds-lp5521.h, leds-lp5523.h
+ */
+
+#ifndef _LEDS_LP55XX_H
+#define _LEDS_LP55XX_H
+
+/* Clock configuration */
+#define LP55XX_CLOCK_AUTO	0
+#define LP55XX_CLOCK_INT	1
+#define LP55XX_CLOCK_EXT	2
+
+/* Bits in LP5521 CONFIG register. 'update_config' in lp55xx_platform_data */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT			1	/* Internal clock */
+#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
+
+struct lp55xx_led_config {
+	const char *name;
+	u8 chan_nr;
+	u8 led_current; /* mA x10, 0 if led is not connected */
+	u8 max_current;
+};
+
+struct lp55xx_predef_pattern {
+	u8 *r;
+	u8 *g;
+	u8 *b;
+	u8 size_r;
+	u8 size_g;
+	u8 size_b;
+};
+
+/*
+ * struct lp55xx_platform_data
+ * @led_config        : Configurable led class device
+ * @num_channels      : Number of LED channels
+ * @label             : Used for naming LEDs
+ * @clock_mode        : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT
+ * @setup_resources   : Platform specific function before enabling the chip
+ * @release_resources : Platform specific function after  disabling the chip
+ * @enable            : EN pin control by platform side
+ * @patterns          : Predefined pattern data for RGB channels
+ * @num_patterns      : Number of patterns
+ * @update_config     : Value of CONFIG register
+ */
+struct lp55xx_platform_data {
+
+	/* LED channel configuration */
+	struct lp55xx_led_config *led_config;
+	u8 num_channels;
+	const char *label;
+
+	/* Clock configuration */
+	u8 clock_mode;
+
+	/* Platform specific functions */
+	int (*setup_resources)(void);
+	void (*release_resources)(void);
+	void (*enable)(bool state);
+
+	/* Predefined pattern data */
+	struct lp55xx_predef_pattern *patterns;
+	unsigned int num_patterns;
+
+	/* _CONFIG register */
+	u8 update_config;
+};
+
+#endif /* _LEDS_LP55XX_H */
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 6d661f32e0e..70655a205b7 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -174,10 +174,13 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
 struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc,
 		const struct of_phandle_args *args);
 
-struct pwm_device *pwm_get(struct device *dev, const char *consumer);
+struct pwm_device *pwm_get(struct device *dev, const char *con_id);
+struct pwm_device *of_pwm_get(struct device_node *np, const char *con_id);
 void pwm_put(struct pwm_device *pwm);
 
-struct pwm_device *devm_pwm_get(struct device *dev, const char *consumer);
+struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id);
+struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
+				   const char *con_id);
 void devm_pwm_put(struct device *dev, struct pwm_device *pwm);
 #else
 static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
@@ -213,6 +216,12 @@ static inline struct pwm_device *pwm_get(struct device *dev,
 	return ERR_PTR(-ENODEV);
 }
 
+static inline struct pwm_device *of_pwm_get(struct device_node *np,
+					    const char *con_id)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline void pwm_put(struct pwm_device *pwm)
 {
 }
@@ -223,6 +232,13 @@ static inline struct pwm_device *devm_pwm_get(struct device *dev,
 	return ERR_PTR(-ENODEV);
 }
 
+static inline struct pwm_device *devm_of_pwm_get(struct device *dev,
+						 struct device_node *np,
+						 const char *con_id)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline void devm_pwm_put(struct device *dev, struct pwm_device *pwm)
 {
 }