Merge tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Here's a long-pending fixes pull request for arm-soc (I didn't send
  one in the -rc4 cycle).

  The larger deltas are from:

   - A fixup of error paths in the mvsdio driver

   - Header file move for a driver that hadn't been properly converted
     to multiplatform on i.MX, which was causing build failures when
     included

   - Device tree updates for at91 dealing mostly with their new pinctrl
     setup merged in 3.8 and mistakes in those initial configs

  The rest are the normal mix of small fixes all over the place; sunxi,
  omap, imx, mvebu, etc, etc."

* tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
  mfd: vexpress-sysreg: Don't skip initialization on probe
  ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree
  ARM: vexpress: extend the MPIDR range used for pen release check
  ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii
  ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig
  ARM: at91/at91_dt_defconfig: remove memory specification to cmdline
  ARM: at91/dts: add macb mii pinctrl config for kizbox
  ARM: at91: rm9200: remake the BGA as default version
  ARM: at91: fix gpios on i2c-gpio for RM9200 DT
  ARM: at91/at91sam9x5 DTS: add SCK USART pins
  ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts
  ARM: at91/at91-pinctrl documentation: fix typo and add some details
  ARM: kirkwood: fix missing #interrupt-cells property
  mmc: mvsdio: use devm_ API to simplify/correct error paths.
  clk: mvebu/clk-cpu.c: fix memory leakage
  ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport
  ARM: OMAP2+: DT node Timer iteration fix
  ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()
  ARM: OMAP2+: fix build break for omapdrm
  ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls
  ...

46 files changed, 248 insertions, 220 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 3a268127b05..bc50899e0c8 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -81,7 +81,8 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 00044026ef1..9b82facb256 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -26,7 +26,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 271855a6e22..e041f42ed71 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -50,27 +50,25 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <17>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>;
+			interrupts = <87>, <88>, <89>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 1c1937dbce7..9e23bd8c953 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -51,39 +51,36 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};
 
 		ethernet@d0034000 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 4905cf3a5ef..965966110e3 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -66,39 +66,36 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};
 
 		ethernet@d0034000 {
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e154f242c68..222047f1ece 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -336,8 +336,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
+		gpios = <&pioA 25 0 /* sda */
+			 &pioA 26 0 /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 3a47cf95214..8ecca6948d8 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -143,6 +143,11 @@
 						atmel,pins =
 							<0 3 0x1 0x0>;	/* PA3 periph A */
 					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<0 4 0x1 0x0>;	/* PA4 periph A */
+					};
 				};
 
 				usart1 {
@@ -154,12 +159,17 @@
 
 					pinctrl_usart1_rts: usart1_rts-0 {
 						atmel,pins =
-							<3 27 0x3 0x0>;	/* PC27 periph C */
+							<2 27 0x3 0x0>;	/* PC27 periph C */
 					};
 
 					pinctrl_usart1_cts: usart1_cts-0 {
 						atmel,pins =
-							<3 28 0x3 0x0>;	/* PC28 periph C */
+							<2 28 0x3 0x0>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<2 28 0x3 0x0>;	/* PC29 periph C */
 					};
 				};
 
@@ -172,46 +182,56 @@
 
 					pinctrl_uart2_rts: uart2_rts-0 {
 						atmel,pins =
-							<0 0 0x2 0x0>;	/* PB0 periph B */
+							<1 0 0x2 0x0>;	/* PB0 periph B */
 					};
 
 					pinctrl_uart2_cts: uart2_cts-0 {
 						atmel,pins =
-							<0 1 0x2 0x0>;	/* PB1 periph B */
+							<1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<1 2 0x2 0x0>;	/* PB2 periph B */
 					};
 				};
 
 				usart3 {
 					pinctrl_uart3: usart3-0 {
 						atmel,pins =
-							<3 23 0x2 0x1	/* PC22 periph B with pullup */
-							 3 23 0x2 0x0>;	/* PC23 periph B */
+							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<3 24 0x2 0x0>;	/* PC24 periph B */
+							<2 24 0x2 0x0>;	/* PC24 periph B */
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<3 25 0x2 0x0>;	/* PC25 periph B */
+							<2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<2 26 0x2 0x0>;	/* PC26 periph B */
 					};
 				};
 
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<3 8 0x3 0x0	/* PC8 periph C */
-							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+							<2 8 0x3 0x0	/* PC8 periph C */
+							 2 9 0x3 0x1>;	/* PC9 periph C with pullup */
 					};
 				};
 
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<3 16 0x3 0x0	/* PC16 periph C */
-							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+							<2 16 0x3 0x0	/* PC16 periph C */
+							 2 17 0x3 0x1>;	/* PC17 periph C with pullup */
 					};
 				};
 
@@ -240,14 +260,14 @@
 
 					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
 						atmel,pins =
-							<1 8 0x1 0x0	/* PA8 periph A */
-							 1 11 0x1 0x0	/* PA11 periph A */
-							 1 12 0x1 0x0	/* PA12 periph A */
-							 1 13 0x1 0x0	/* PA13 periph A */
-							 1 14 0x1 0x0	/* PA14 periph A */
-							 1 15 0x1 0x0	/* PA15 periph A */
-							 1 16 0x1 0x0	/* PA16 periph A */
-							 1 17 0x1 0x0>;	/* PA17 periph A */
+							<1 8 0x1 0x0	/* PB8 periph A */
+							 1 11 0x1 0x0	/* PB11 periph A */
+							 1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0	/* PB13 periph A */
+							 1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x0	/* PB15 periph A */
+							 1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0>;	/* PB17 periph A */
 					};
 				};
 
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index fddd1741743..46c09801703 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -96,8 +96,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -120,8 +120,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -141,8 +141,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index fed7d3f9f43..cdee96fca6e 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,10 +26,15 @@
 };
 
 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
 
+&sdio0 {
+	status = "okay";
+	/* sdio0 card detect is connected to wrong pin on CuBox */
+	cd-gpios = <&gpio0 12 1>;
+};
+
 &spi0 {
 	status = "okay";
 
@@ -42,9 +47,14 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <&pmx_gpio_18>;
+	pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
 	pinctrl-names = "default";
 
+	pmx_gpio_12: pmx-gpio-12 {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
 	pmx_gpio_18: pmx-gpio-18 {
 		marvell,pins = "mpp18";
 		marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 942d5761ca9..e05b18f3c33 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -115,8 +115,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -139,8 +139,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 9bc6785ad22..77d21abfcdf 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -6,6 +7,21 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+					&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <166666667>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 110d6cbb795..d6ab442b701 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -36,6 +36,7 @@
 			reg = <0x10100 0x40>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <35>, <36>, <37>, <38>;
 		};
 
@@ -46,6 +47,7 @@
 			reg = <0x10140 0x40>;
 			ngpios = <18>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <39>, <40>, <41>;
 		};
 
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index e8814fe0e27..b4dc3ed9a3e 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -48,6 +48,8 @@
 
 			macb0: ethernet@fffc4000 {
 				phy-mode = "mii";
+				pinctrl-0 = <&pinctrl_macb_rmii
+				             &pinctrl_macb_rmii_mii_alt>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 8bbc2bfef22..8b36abea9f2 100644
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -60,19 +60,21 @@
 		};
 
 		uart0: uart@01c28000 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <1>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};
 
 		uart1: uart@01c28400 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <2>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 1fc405a9ecf..cf8071ad22d 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -45,7 +45,6 @@
 			reg = <1>;
 		};
 
-/* A7s disabled till big.LITTLE patches are available...
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -63,7 +62,6 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 		};
-*/
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index b175577d7ab..1ea959019fc 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 6809200c31f..14f7c3b1463 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -100,12 +100,14 @@ ENTRY(printch)
 		b	1b
 ENDPROC(printch)
 
+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
 		addruart r2, r3, ip
 		str	r2, [r0]
 		str	r3, [r1]
 		mov	pc, lr
 ENDPROC(debug_ll_addr)
+#endif
 
 #else
 
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 9ee866ce047..4b678478cf9 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;
 
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3e628fd7a67..0a2349dc701 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -851,6 +851,7 @@ config SOC_IMX6Q
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
 	select PINCTRL
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7f2c10c7413..c0c4e723b7f 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 7191ab4434e..fa36fb84ab1 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 10b0ed39f07..25a47c616b2 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("imx-fb", 0,
+	return imx_add_platform_device_dmamask(data->devid, 0,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3dec962b077..7bc5fe15dda 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
-	imx_enable_cpu(cpu, false);
+	cpu_do_idle();
+}
 
-	/* spin here until hardware takes it down */
-	while (1)
-		;
+int imx_cpu_kill(unsigned int cpu)
+{
+	imx_enable_cpu(cpu, false);
+	return 1;
 }
diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
index 6c80424f678..e05cf407db6 100644
--- a/arch/arm/mach-imx/iram_alloc.c
+++ b/arch/arm/mach-imx/iram_alloc.c
@@ -22,8 +22,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/genalloc.h>
-
-#include "iram.h"
+#include "linux/platform_data/imx-iram.h"
 
 static unsigned long iram_phys_base;
 static void __iomem *iram_virt_base;
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 3777b805b76..66fae885c84 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
 	.smp_boot_secondary	= imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= imx_cpu_die,
+	.cpu_kill		= imx_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index a17543da602..ee42d20cba1 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		cpu_suspend(0, imx6q_suspend_finish);
 		imx_smp_prepare();
 		imx_gpc_post_resume();
+		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
 		return -EINVAL;
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index be50e795536..e7fcea7f330 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
 	int ret = 0;
 
+	if (!ap_syscon_base)
+		return -EINVAL;
+
 	if (nr == 0) {
 		sys->mem_offset = PHYS_PCI_MEM_BASE;
 		ret = pci_v3_setup_resources(sys);
-		/* Remap the Integrator system controller */
-		ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-		if (!ap_syscon_base)
-			return -EINVAL;
 	}
 
 	return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
 	unsigned int temp;
 	int ret;
 
+	/* Remap the Integrator system controller */
+	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		pr_err("unable to remap the AP syscon for PCIv3\n");
+		return;
+	}
+
 	pcibios_min_mem = 0x00100000;
 
 	/*
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720ab5a..f4632a809f6 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ns2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
 #define NS2_GPIO_POWER_OFF	31
 
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(ns2_mpp_config);
-
 	if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
 	    of_machine_is_compatible("lacie,netspace_mini_v2"))
 		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 5dcb369b58a..99df4df680f 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,6 +1,8 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include
 
+AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
+
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9cee2c2..769c1feee1c 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 		  OMAP_PULL_ENA),
 	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
+	/* UART2 - BT/FM/GPS shared transport */
+	OMAP4_MUX(UART2_CTS,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RTS,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RX,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_TX,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
index 7e5febe456d..ab7e952d207 100644
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
index eda079b96c6..eb3dab68d53 100644
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 5789a5e2556..a2cc046b47f 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
 	 */
-	if (cpu_is_omap446x()) {
-		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-		if (!rc)
-			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-		if (rc)
-			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-	}
+	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+	if (!rc)
+		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5e304d0719a..626f3ea3142 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
 	return cnt;
 }
 
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
 	struct omap_hwmod	*oh;
 	struct platform_device	*pdev;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 4c7566c7e24..2a2cfa88ddb 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
 			oh->name);
 	}
 
-	platform_data.omaprev = GET_OMAP_REVISION();
+	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d5081ed1..793f54ac7d1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * currently reset very early during boot, before I2C is
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
+	 *
+	 * Also, McPDM needs to be configured to NO_IDLE mode when it
+	 * is in used otherwise vital clocks will be gated which
+	 * results 'slow motion' audio playback.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 691aa674665..b8ad6e632bb 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
 	struct device_node *np;
 
 	for_each_matching_node(np, match) {
-		if (!of_device_is_available(np)) {
-			of_node_put(np);
+		if (!of_device_is_available(np))
 			continue;
-		}
 
-		if (property && !of_get_property(np, property, NULL)) {
-			of_node_put(np);
+		if (property && !of_get_property(np, property, NULL))
 			continue;
-		}
 
 		of_add_property(np, &device_disabled);
 		return np;
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 553059f5184..755c0bb119f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
-		.irq		= S3C_EINT(5),
+		.irq		= S3C_EINT(4),
 		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 7feb426fc20..d2e1a16690b 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
 	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
 		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
 
+#ifdef CONFIG_S3C_DEV_FB
 	if (dev_get_platdata(&s3c_device_fb.dev))
 		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S
index dd703ef09b8..b178d44e9ea 100644
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/plat-versatile/headsmp.S
@@ -20,7 +20,7 @@
  */
 ENTRY(versatile_secondary_startup)
 	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
+	bic	r0, #0xff000000
 	adr	r4, 1f
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5
diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
index ff004578a11..9dd2551a0a4 100644
--- a/drivers/clk/mvebu/clk-cpu.c
+++ b/drivers/clk/mvebu/clk-cpu.c
@@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node)
 
 	clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL);
 	if (WARN_ON(!clks))
-		return;
+		goto clks_out;
 
 	for_each_node_by_type(dn, "cpu") {
 		struct clk_init_data init;
@@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node)
 		int cpu, err;
 
 		if (WARN_ON(!clk_name))
-			return;
+			goto bail_out;
 
 		err = of_property_read_u32(dn, "reg", &cpu);
 		if (WARN_ON(err))
-			return;
+			goto bail_out;
 
 		sprintf(clk_name, "cpu%d", cpu);
 		parent_clk = of_clk_get(node, 0);
@@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node)
 	return;
 bail_out:
 	kfree(clks);
+	while(ncpus--)
+		kfree(cpuclk[ncpus].clk_name);
+clks_out:
 	kfree(cpuclk);
 }
 
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index 1cf8293c0fb..4a980e029ca 100644
--- a/drivers/media/platform/coda.c
+++ b/drivers/media/platform/coda.c
@@ -23,8 +23,8 @@
 #include <linux/slab.h>
 #include <linux/videodev2.h>
 #include <linux/of.h>
+#include <linux/platform_data/imx-iram.h>
 
-#include <mach/iram.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index e5d8f63b252..77048b18439 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -313,19 +313,11 @@ static void vexpress_sysreg_config_complete(unsigned long data)
 }
 
 
-void __init vexpress_sysreg_early_init(void __iomem *base)
+void __init vexpress_sysreg_setup(struct device_node *node)
 {
-	struct device_node *node = of_find_compatible_node(NULL, NULL,
-			"arm,vexpress-sysreg");
-
-	if (node)
-		base = of_iomap(node, 0);
-
-	if (WARN_ON(!base))
+	if (WARN_ON(!vexpress_sysreg_base))
 		return;
 
-	vexpress_sysreg_base = base;
-
 	if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
 		vexpress_master_site = VEXPRESS_SITE_DB2;
 	else
@@ -336,9 +328,23 @@ void __init vexpress_sysreg_early_init(void __iomem *base)
 	WARN_ON(!vexpress_sysreg_config_bridge);
 }
 
+void __init vexpress_sysreg_early_init(void __iomem *base)
+{
+	vexpress_sysreg_base = base;
+	vexpress_sysreg_setup(NULL);
+}
+
 void __init vexpress_sysreg_of_early_init(void)
 {
-	vexpress_sysreg_early_init(NULL);
+	struct device_node *node = of_find_compatible_node(NULL, NULL,
+			"arm,vexpress-sysreg");
+
+	if (node) {
+		vexpress_sysreg_base = of_iomap(node, 0);
+		vexpress_sysreg_setup(node);
+	} else {
+		pr_info("vexpress-sysreg: No Device Tree node found.");
+	}
 }
 
 
@@ -426,9 +432,11 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	if (!vexpress_sysreg_base)
+	if (!vexpress_sysreg_base) {
 		vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start,
 				resource_size(res));
+		vexpress_sysreg_setup(pdev->dev.of_node);
+	}
 
 	if (!vexpress_sysreg_base) {
 		dev_err(&pdev->dev, "Failed to obtain base address!\n");
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index de4c20b3936..f8dd3610294 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -50,8 +50,6 @@ struct mvsd_host {
 	struct timer_list timer;
 	struct mmc_host *mmc;
 	struct device *dev;
-	struct resource *res;
-	int irq;
 	struct clk *clk;
 	int gpio_card_detect;
 	int gpio_write_protect;
@@ -718,10 +716,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	if (!r || irq < 0 || !mvsd_data)
 		return -ENXIO;
 
-	r = request_mem_region(r->start, SZ_1K, DRIVER_NAME);
-	if (!r)
-		return -EBUSY;
-
 	mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev);
 	if (!mmc) {
 		ret = -ENOMEM;
@@ -731,8 +725,8 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 	host->dev = &pdev->dev;
-	host->res = r;
 	host->base_clock = mvsd_data->clock / 2;
+	host->clk = ERR_PTR(-EINVAL);
 
 	mmc->ops = &mvsd_ops;
 
@@ -752,7 +746,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
 
 	spin_lock_init(&host->lock);
 
-	host->base = ioremap(r->start, SZ_4K);
+	host->base = devm_request_and_ioremap(&pdev->dev, r);
 	if (!host->base) {
 		ret = -ENOMEM;
 		goto out;
@@ -765,44 +759,45 @@ static int __init mvsd_probe(struct platform_device *pdev)
 
 	mvsd_power_down(host);
 
-	ret = request_irq(irq, mvsd_irq, 0, DRIVER_NAME, host);
+	ret = devm_request_irq(&pdev->dev, irq, mvsd_irq, 0, DRIVER_NAME, host);
 	if (ret) {
 		pr_err("%s: cannot assign irq %d\n", DRIVER_NAME, irq);
 		goto out;
-	} else
-		host->irq = irq;
+	}
 
 	/* Not all platforms can gate the clock, so it is not
 	   an error if the clock does not exists. */
-	host->clk = clk_get(&pdev->dev, NULL);
-	if (!IS_ERR(host->clk)) {
+	host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(host->clk))
 		clk_prepare_enable(host->clk);
-	}
 
 	if (mvsd_data->gpio_card_detect) {
-		ret = gpio_request(mvsd_data->gpio_card_detect,
-				   DRIVER_NAME " cd");
+		ret = devm_gpio_request_one(&pdev->dev,
+					    mvsd_data->gpio_card_detect,
+					    GPIOF_IN, DRIVER_NAME " cd");
 		if (ret == 0) {
-			gpio_direction_input(mvsd_data->gpio_card_detect);
 			irq = gpio_to_irq(mvsd_data->gpio_card_detect);
-			ret = request_irq(irq, mvsd_card_detect_irq,
-					  IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING,
-					  DRIVER_NAME " cd", host);
+			ret = devm_request_irq(&pdev->dev, irq,
+					       mvsd_card_detect_irq,
+					       IRQ_TYPE_EDGE_RISING |
+					       IRQ_TYPE_EDGE_FALLING,
+					       DRIVER_NAME " cd", host);
 			if (ret == 0)
 				host->gpio_card_detect =
 					mvsd_data->gpio_card_detect;
 			else
-				gpio_free(mvsd_data->gpio_card_detect);
+				devm_gpio_free(&pdev->dev,
+					       mvsd_data->gpio_card_detect);
 		}
 	}
 	if (!host->gpio_card_detect)
 		mmc->caps |= MMC_CAP_NEEDS_POLL;
 
 	if (mvsd_data->gpio_write_protect) {
-		ret = gpio_request(mvsd_data->gpio_write_protect,
-				   DRIVER_NAME " wp");
+		ret = devm_gpio_request_one(&pdev->dev,
+					    mvsd_data->gpio_write_protect,
+					    GPIOF_IN, DRIVER_NAME " wp");
 		if (ret == 0) {
-			gpio_direction_input(mvsd_data->gpio_write_protect);
 			host->gpio_write_protect =
 				mvsd_data->gpio_write_protect;
 		}
@@ -824,26 +819,11 @@ static int __init mvsd_probe(struct platform_device *pdev)
 	return 0;
 
 out:
-	if (host) {
-		if (host->irq)
-			free_irq(host->irq, host);
-		if (host->gpio_card_detect) {
-			free_irq(gpio_to_irq(host->gpio_card_detect), host);
-			gpio_free(host->gpio_card_detect);
-		}
-		if (host->gpio_write_protect)
-			gpio_free(host->gpio_write_protect);
-		if (host->base)
-			iounmap(host->base);
-	}
-	if (r)
-		release_resource(r);
-	if (mmc)
-		if (!IS_ERR_OR_NULL(host->clk)) {
+	if (mmc) {
+		if (!IS_ERR(host->clk))
 			clk_disable_unprepare(host->clk);
-			clk_put(host->clk);
-		}
 		mmc_free_host(mmc);
+	}
 
 	return ret;
 }
@@ -852,28 +832,16 @@ static int __exit mvsd_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 
-	if (mmc) {
-		struct mvsd_host *host = mmc_priv(mmc);
+	struct mvsd_host *host = mmc_priv(mmc);
 
-		if (host->gpio_card_detect) {
-			free_irq(gpio_to_irq(host->gpio_card_detect), host);
-			gpio_free(host->gpio_card_detect);
-		}
-		mmc_remove_host(mmc);
-		free_irq(host->irq, host);
-		if (host->gpio_write_protect)
-			gpio_free(host->gpio_write_protect);
-		del_timer_sync(&host->timer);
-		mvsd_power_down(host);
-		iounmap(host->base);
-		release_resource(host->res);
+	mmc_remove_host(mmc);
+	del_timer_sync(&host->timer);
+	mvsd_power_down(host);
+
+	if (!IS_ERR(host->clk))
+		clk_disable_unprepare(host->clk);
+	mmc_free_host(mmc);
 
-		if (!IS_ERR(host->clk)) {
-			clk_disable_unprepare(host->clk);
-			clk_put(host->clk);
-		}
-		mmc_free_host(mmc);
-	}
 	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 12526787a7c..0abf2bf2083 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -139,6 +139,7 @@ struct imxfb_info {
 	struct clk		*clk_ahb;
 	struct clk		*clk_per;
 	enum imxfb_type		devtype;
+	bool			enabled;
 
 	/*
 	 * These are the addresses we mapped
@@ -536,6 +537,10 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
 
 static void imxfb_enable_controller(struct imxfb_info *fbi)
 {
+
+	if (fbi->enabled)
+		return;
+
 	pr_debug("Enabling LCD controller\n");
 
 	writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
@@ -556,6 +561,7 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 	clk_prepare_enable(fbi->clk_ipg);
 	clk_prepare_enable(fbi->clk_ahb);
 	clk_prepare_enable(fbi->clk_per);
+	fbi->enabled = true;
 
 	if (fbi->backlight_power)
 		fbi->backlight_power(1);
@@ -565,6 +571,9 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 
 static void imxfb_disable_controller(struct imxfb_info *fbi)
 {
+	if (!fbi->enabled)
+		return;
+
 	pr_debug("Disabling LCD controller\n");
 
 	if (fbi->backlight_power)
@@ -575,6 +584,7 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
 	clk_disable_unprepare(fbi->clk_per);
 	clk_disable_unprepare(fbi->clk_ipg);
 	clk_disable_unprepare(fbi->clk_ahb);
+	fbi->enabled = false;
 
 	writel(0, fbi->regs + LCDC_RMCR);
 }
@@ -729,6 +739,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
 
 	memset(fbi, 0, sizeof(struct imxfb_info));
 
+	fbi->devtype = pdev->id_entry->driver_data;
+
 	strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id));
 
 	info->fix.type			= FB_TYPE_PACKED_PIXELS;
@@ -789,7 +801,6 @@ static int __init imxfb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	fbi = info->par;
-	fbi->devtype = pdev->id_entry->driver_data;
 
 	if (!fb_mode)
 		fb_mode = pdata->mode[0].mode.name;
diff --git a/arch/arm/mach-imx/iram.h b/include/linux/platform_data/imx-iram.h
index 022690c3370..022690c3370 100644
--- a/arch/arm/mach-imx/iram.h
+++ b/include/linux/platform_data/imx-iram.h