summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-29 17:20:55 -0400
committerJeff Garzik <jeff@garzik.org>2006-08-29 17:20:55 -0400
commita422142cfdf90d889d8d3e2affb8311a381530b7 (patch)
treebde7e2c7a3ee8bca649aecd877a9ee1593f4223e
parent6fc47e31c0e802d205d67e644f654532e5d365d5 (diff)
parent60d4684068ff1eec78f55b5888d0bd2d4cca1520 (diff)
downloadlinux-3.10-a422142cfdf90d889d8d3e2affb8311a381530b7.tar.gz
linux-3.10-a422142cfdf90d889d8d3e2affb8311a381530b7.tar.bz2
linux-3.10-a422142cfdf90d889d8d3e2affb8311a381530b7.zip
Merge branch 'master' into upstream
-rw-r--r--CREDITS2
-rw-r--r--Documentation/connector/ucon.c206
-rw-r--r--Documentation/cpusets.txt6
-rw-r--r--Documentation/filesystems/00-INDEX4
-rw-r--r--Documentation/filesystems/relay.txt479
-rw-r--r--Documentation/filesystems/relayfs.txt442
-rw-r--r--Documentation/input/joystick.txt1
-rw-r--r--Documentation/scsi/ChangeLog.megaraid123
-rw-r--r--Documentation/sysctl/fs.txt20
-rw-r--r--Documentation/sysctl/kernel.txt20
-rw-r--r--MAINTAINERS6
-rw-r--r--Makefile2
-rw-r--r--arch/arm/common/dmabounce.c8
-rw-r--r--arch/arm/kernel/entry-armv.S21
-rw-r--r--arch/arm/kernel/head.S2
-rw-r--r--arch/arm/mach-s3c2410/Makefile36
-rw-r--r--arch/arm/mach-s3c2410/dma.c163
-rw-r--r--arch/arm/mach-versatile/core.c2
-rw-r--r--arch/i386/Kconfig4
-rw-r--r--arch/i386/kernel/acpi/boot.c2
-rw-r--r--arch/i386/kernel/acpi/wakeup.S5
-rw-r--r--arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c9
-rw-r--r--arch/i386/pci/init.c8
-rw-r--r--arch/i386/pci/mmconfig.c2
-rw-r--r--arch/ia64/hp/sim/simscsi.c3
-rw-r--r--arch/ia64/kernel/acpi.c2
-rw-r--r--arch/powerpc/boot/dts/mpc8540ads.dts257
-rw-r--r--arch/powerpc/boot/dts/mpc8541cds.dts244
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts287
-rw-r--r--arch/powerpc/boot/dts/mpc8555cds.dts244
-rw-r--r--arch/powerpc/kernel/legacy_serial.c8
-rw-r--r--arch/powerpc/kernel/prom_parse.c13
-rw-r--r--arch/powerpc/kernel/time.c25
-rw-r--r--arch/powerpc/kernel/traps.c8
-rw-r--r--arch/powerpc/mm/hugetlbpage.c2
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c162
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_cds.c210
-rw-r--r--arch/powerpc/platforms/86xx/mpc8641_hpcn.h32
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c324
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c73
-rw-r--r--arch/powerpc/platforms/powermac/bootx_init.c15
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c30
-rw-r--r--arch/powerpc/sysdev/tsi108_dev.c10
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c21
-rw-r--r--arch/sparc/kernel/setup.c4
-rw-r--r--arch/sparc/kernel/smp.c1
-rw-r--r--arch/sparc/kernel/sun4d_smp.c2
-rw-r--r--arch/sparc/kernel/sun4m_smp.c2
-rw-r--r--block/cfq-iosched.c2
-rw-r--r--block/elevator.c3
-rw-r--r--block/ll_rw_blk.c2
-rw-r--r--drivers/acpi/ac.c2
-rw-r--r--drivers/acpi/acpi_memhotplug.c8
-rw-r--r--drivers/acpi/battery.c3
-rw-r--r--drivers/acpi/bus.c11
-rw-r--r--drivers/acpi/hotkey.c281
-rw-r--r--drivers/acpi/i2c_ec.c2
-rw-r--r--drivers/acpi/osl.c10
-rw-r--r--drivers/acpi/sbs.c3
-rw-r--r--drivers/acpi/scan.c12
-rw-r--r--drivers/acpi/utils.c2
-rw-r--r--drivers/base/node.c2
-rw-r--r--drivers/cdrom/gscd.c2
-rw-r--r--drivers/char/moxa.c8
-rw-r--r--drivers/char/tty_io.c808
-rw-r--r--drivers/char/tty_ioctl.c59
-rw-r--r--drivers/char/vt_ioctl.c2
-rw-r--r--drivers/hwmon/abituguru.c99
-rw-r--r--drivers/i2c/chips/tps65010.c12
-rw-r--r--drivers/ieee1394/ohci1394.c4
-rw-r--r--drivers/infiniband/core/cache.c3
-rw-r--r--drivers/infiniband/core/sa_query.c3
-rw-r--r--drivers/infiniband/hw/mthca/mthca_main.c6
-rw-r--r--drivers/infiniband/hw/mthca/mthca_provider.c11
-rw-r--r--drivers/infiniband/hw/mthca/mthca_provider.h4
-rw-r--r--drivers/infiniband/hw/mthca/mthca_qp.c54
-rw-r--r--drivers/infiniband/ulp/iser/iscsi_iser.c22
-rw-r--r--drivers/input/keyboard/atkbd.c2
-rw-r--r--drivers/input/misc/wistron_btns.c16
-rw-r--r--drivers/input/mouse/psmouse-base.c7
-rw-r--r--drivers/md/dm-raid1.c4
-rw-r--r--drivers/md/md.c13
-rw-r--r--drivers/md/raid1.c7
-rw-r--r--drivers/message/fusion/mptbase.h1
-rw-r--r--drivers/message/fusion/mptfc.c92
-rw-r--r--drivers/mtd/nand/ams-delta.c10
-rw-r--r--drivers/mtd/nand/nand_base.c6
-rw-r--r--drivers/pci/hotplug/Kconfig2
-rw-r--r--drivers/pci/hotplug/cpci_hotplug_pci.c54
-rw-r--r--drivers/pci/pci-driver.c3
-rw-r--r--drivers/pci/quirks.c59
-rw-r--r--drivers/rtc/rtc-s3c.c124
-rw-r--r--drivers/s390/block/dasd_devmap.c8
-rw-r--r--drivers/s390/block/dasd_eckd.c14
-rw-r--r--drivers/s390/scsi/zfcp_aux.c120
-rw-r--r--drivers/s390/scsi/zfcp_ccw.c5
-rw-r--r--drivers/s390/scsi/zfcp_def.h15
-rw-r--r--drivers/s390/scsi/zfcp_erp.c212
-rw-r--r--drivers/s390/scsi/zfcp_ext.h9
-rw-r--r--drivers/s390/scsi/zfcp_fsf.c122
-rw-r--r--drivers/s390/scsi/zfcp_qdio.c79
-rw-r--r--drivers/s390/scsi/zfcp_scsi.c73
-rw-r--r--drivers/scsi/ata_piix.c84
-rw-r--r--drivers/scsi/esp.c3
-rw-r--r--drivers/scsi/hptiop.c568
-rw-r--r--drivers/scsi/ide-scsi.c2
-rw-r--r--drivers/scsi/iscsi_tcp.c209
-rw-r--r--drivers/scsi/iscsi_tcp.h2
-rw-r--r--drivers/scsi/libata-core.c2
-rw-r--r--drivers/scsi/libiscsi.c214
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c101
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_ct.c13
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c21
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c15
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c13
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c16
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c24
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c21
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c57
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.h20
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h2
-rw-r--r--drivers/scsi/megaraid/mega_common.h6
-rw-r--r--drivers/scsi/megaraid/megaraid_ioctl.h4
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c42
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.h4
-rw-r--r--drivers/scsi/megaraid/megaraid_mm.c2
-rw-r--r--drivers/scsi/megaraid/megaraid_mm.h4
-rw-r--r--drivers/scsi/pdc_adma.c3
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h1
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c11
-rw-r--r--drivers/scsi/qla2xxx/qla_iocb.c1
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c5
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c15
-rw-r--r--drivers/scsi/qla2xxx/qla_version.h4
-rw-r--r--drivers/scsi/sata_via.c117
-rw-r--r--drivers/scsi/scsi_error.c18
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c15
-rw-r--r--drivers/scsi/sg.c8
-rw-r--r--drivers/scsi/sym53c8xx_2/sym_glue.c2
-rw-r--r--drivers/serial/sunsab.c9
-rw-r--r--drivers/serial/sunzilog.c3
-rw-r--r--drivers/usb/misc/cypress_cy7c63.c2
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h4
-rw-r--r--drivers/usb/storage/unusual_devs.h2
-rw-r--r--drivers/video/imacfb.c4
-rw-r--r--drivers/video/matrox/g450_pll.c8
-rw-r--r--fs/block_dev.c114
-rw-r--r--fs/eventpoll.c4
-rw-r--r--fs/exec.c10
-rw-r--r--fs/ext2/super.c2
-rw-r--r--fs/ext3/balloc.c6
-rw-r--r--fs/ioprio.c30
-rw-r--r--fs/jbd/commit.c6
-rw-r--r--fs/jbd/journal.c92
-rw-r--r--fs/jbd/transaction.c9
-rw-r--r--fs/lockd/svcsubs.c15
-rw-r--r--fs/minix/inode.c13
-rw-r--r--fs/namei.c11
-rw-r--r--fs/nfs/file.c8
-rw-r--r--fs/nfs/idmap.c4
-rw-r--r--fs/nfs/nfs4proc.c29
-rw-r--r--fs/nfs/nfs4xdr.c21
-rw-r--r--fs/nfs/read.c23
-rw-r--r--fs/partitions/sun.c2
-rw-r--r--fs/proc/proc_misc.c2
-rw-r--r--fs/reiserfs/xattr.c2
-rw-r--r--fs/udf/super.c2
-rw-r--r--fs/udf/truncate.c64
-rw-r--r--fs/ufs/inode.c35
-rw-r--r--fs/ufs/truncate.c77
-rw-r--r--include/asm-arm/arch-s3c2410/dma.h1
-rw-r--r--include/asm-arm/arch-s3c2410/regs-rtc.h2
-rw-r--r--include/asm-arm/procinfo.h1
-rw-r--r--include/asm-i386/mmzone.h2
-rw-r--r--include/asm-powerpc/pgalloc.h2
-rw-r--r--include/asm-powerpc/system.h9
-rw-r--r--include/asm-powerpc/tsi108.h14
-rw-r--r--include/asm-powerpc/tsi108_irq.h124
-rw-r--r--include/asm-sparc64/pgtable.h2
-rw-r--r--include/linux/compat_ioctl.h1
-rw-r--r--include/linux/fs.h3
-rw-r--r--include/linux/ioprio.h23
-rw-r--r--include/linux/jbd.h3
-rw-r--r--include/linux/netfilter_bridge.h14
-rw-r--r--include/linux/nfs_xdr.h2
-rw-r--r--include/linux/node.h10
-rw-r--r--include/linux/sunrpc/rpc_pipe_fs.h4
-rw-r--r--include/linux/sunrpc/xprt.h2
-rw-r--r--include/linux/tty.h1
-rw-r--r--include/linux/vt.h1
-rw-r--r--include/net/sctp/sctp.h13
-rw-r--r--include/net/sctp/sm.h3
-rw-r--r--include/scsi/libiscsi.h19
-rw-r--r--include/scsi/scsi_transport_iscsi.h4
-rw-r--r--kernel/cpuset.c35
-rw-r--r--kernel/futex.c2
-rw-r--r--kernel/sched.c4
-rw-r--r--kernel/stop_machine.c1
-rw-r--r--lib/ts_bm.c11
-rw-r--r--mm/swapfile.c3
-rw-r--r--net/bridge/br_forward.c10
-rw-r--r--net/dccp/ccids/ccid3.c153
-rw-r--r--net/dccp/ccids/ccid3.h9
-rw-r--r--net/dccp/ccids/lib/loss_interval.c36
-rw-r--r--net/dccp/ccids/lib/loss_interval.h9
-rw-r--r--net/dccp/ccids/lib/packet_history.c168
-rw-r--r--net/dccp/ccids/lib/packet_history.h17
-rw-r--r--net/dccp/ccids/lib/tfrc.h2
-rw-r--r--net/dccp/ccids/lib/tfrc_equation.c2
-rw-r--r--net/dccp/dccp.h10
-rw-r--r--net/dccp/options.c2
-rw-r--r--net/ipv4/netfilter/arp_tables.c3
-rw-r--r--net/ipv4/tcp_output.c1
-rw-r--r--net/ipv6/tcp_ipv6.c2
-rw-r--r--net/sctp/sm_make_chunk.c30
-rw-r--r--net/sctp/sm_statefuns.c20
-rw-r--r--net/sctp/socket.c10
-rw-r--r--net/sunrpc/auth_gss/auth_gss.c3
-rw-r--r--net/sunrpc/clnt.c30
-rw-r--r--net/sunrpc/rpc_pipe.c55
223 files changed, 5830 insertions, 3372 deletions
diff --git a/CREDITS b/CREDITS
index 29be6d1fdf4..0fe904ebb7c 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2209,7 +2209,7 @@ S: (address available on request)
S: USA
N: Ian McDonald
-E: iam4@cs.waikato.ac.nz
+E: ian.mcdonald@jandi.co.nz
E: imcdnzl@gmail.com
W: http://wand.net.nz/~iam4
W: http://imcdnzl.blogspot.com
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
new file mode 100644
index 00000000000..d738cde2a8d
--- /dev/null
+++ b/Documentation/connector/ucon.c
@@ -0,0 +1,206 @@
+/*
+ * ucon.c
+ *
+ * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/types.h>
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/poll.h>
+
+#include <linux/netlink.h>
+#include <linux/rtnetlink.h>
+
+#include <arpa/inet.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <errno.h>
+#include <time.h>
+
+#include <linux/connector.h>
+
+#define DEBUG
+#define NETLINK_CONNECTOR 11
+
+#ifdef DEBUG
+#define ulog(f, a...) fprintf(stdout, f, ##a)
+#else
+#define ulog(f, a...) do {} while (0)
+#endif
+
+static int need_exit;
+static __u32 seq;
+
+static int netlink_send(int s, struct cn_msg *msg)
+{
+ struct nlmsghdr *nlh;
+ unsigned int size;
+ int err;
+ char buf[128];
+ struct cn_msg *m;
+
+ size = NLMSG_SPACE(sizeof(struct cn_msg) + msg->len);
+
+ nlh = (struct nlmsghdr *)buf;
+ nlh->nlmsg_seq = seq++;
+ nlh->nlmsg_pid = getpid();
+ nlh->nlmsg_type = NLMSG_DONE;
+ nlh->nlmsg_len = NLMSG_LENGTH(size - sizeof(*nlh));
+ nlh->nlmsg_flags = 0;
+
+ m = NLMSG_DATA(nlh);
+#if 0
+ ulog("%s: [%08x.%08x] len=%u, seq=%u, ack=%u.\n",
+ __func__, msg->id.idx, msg->id.val, msg->len, msg->seq, msg->ack);
+#endif
+ memcpy(m, msg, sizeof(*m) + msg->len);
+
+ err = send(s, nlh, size, 0);
+ if (err == -1)
+ ulog("Failed to send: %s [%d].\n",
+ strerror(errno), errno);
+
+ return err;
+}
+
+int main(int argc, char *argv[])
+{
+ int s;
+ char buf[1024];
+ int len;
+ struct nlmsghdr *reply;
+ struct sockaddr_nl l_local;
+ struct cn_msg *data;
+ FILE *out;
+ time_t tm;
+ struct pollfd pfd;
+
+ if (argc < 2)
+ out = stdout;
+ else {
+ out = fopen(argv[1], "a+");
+ if (!out) {
+ ulog("Unable to open %s for writing: %s\n",
+ argv[1], strerror(errno));
+ out = stdout;
+ }
+ }
+
+ memset(buf, 0, sizeof(buf));
+
+ s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+ if (s == -1) {
+ perror("socket");
+ return -1;
+ }
+
+ l_local.nl_family = AF_NETLINK;
+ l_local.nl_groups = 0x123; /* bitmask of requested groups */
+ l_local.nl_pid = 0;
+
+ if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+ perror("bind");
+ close(s);
+ return -1;
+ }
+
+#if 0
+ {
+ int on = 0x57; /* Additional group number */
+ setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on));
+ }
+#endif
+ if (0) {
+ int i, j;
+
+ memset(buf, 0, sizeof(buf));
+
+ data = (struct cn_msg *)buf;
+
+ data->id.idx = 0x123;
+ data->id.val = 0x456;
+ data->seq = seq++;
+ data->ack = 0;
+ data->len = 0;
+
+ for (j=0; j<10; ++j) {
+ for (i=0; i<1000; ++i) {
+ len = netlink_send(s, data);
+ }
+
+ ulog("%d messages have been sent to %08x.%08x.\n", i, data->id.idx, data->id.val);
+ }
+
+ return 0;
+ }
+
+
+ pfd.fd = s;
+
+ while (!need_exit) {
+ pfd.events = POLLIN;
+ pfd.revents = 0;
+ switch (poll(&pfd, 1, -1)) {
+ case 0:
+ need_exit = 1;
+ break;
+ case -1:
+ if (errno != EINTR) {
+ need_exit = 1;
+ break;
+ }
+ continue;
+ }
+ if (need_exit)
+ break;
+
+ memset(buf, 0, sizeof(buf));
+ len = recv(s, buf, sizeof(buf), 0);
+ if (len == -1) {
+ perror("recv buf");
+ close(s);
+ return -1;
+ }
+ reply = (struct nlmsghdr *)buf;
+
+ switch (reply->nlmsg_type) {
+ case NLMSG_ERROR:
+ fprintf(out, "Error message received.\n");
+ fflush(out);
+ break;
+ case NLMSG_DONE:
+ data = (struct cn_msg *)NLMSG_DATA(reply);
+
+ time(&tm);
+ fprintf(out, "%.24s : [%x.%x] [%08u.%08u].\n",
+ ctime(&tm), data->id.idx, data->id.val, data->seq, data->ack);
+ fflush(out);
+ break;
+ default:
+ break;
+ }
+ }
+
+ close(s);
+ return 0;
+}
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 159e2a0c3e8..76b44290c15 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -217,6 +217,12 @@ exclusive cpuset. Also, the use of a Linux virtual file system (vfs)
to represent the cpuset hierarchy provides for a familiar permission
and name space for cpusets, with a minimum of additional kernel code.
+The cpus file in the root (top_cpuset) cpuset is read-only.
+It automatically tracks the value of cpu_online_map, using a CPU
+hotplug notifier. If and when memory nodes can be hotplugged,
+we expect to make the mems file in the root cpuset read-only
+as well, and have it track the value of node_online_map.
+
1.4 What are exclusive cpusets ?
--------------------------------
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 66fdc0744fe..16dec61d767 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -62,8 +62,8 @@ ramfs-rootfs-initramfs.txt
- info on the 'in memory' filesystems ramfs, rootfs and initramfs.
reiser4.txt
- info on the Reiser4 filesystem based on dancing tree algorithms.
-relayfs.txt
- - info on relayfs, for efficient streaming from kernel to user space.
+relay.txt
+ - info on relay, for efficient streaming from kernel to user space.
romfs.txt
- description of the ROMFS filesystem.
smbfs.txt
diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt
new file mode 100644
index 00000000000..d6788dae034
--- /dev/null
+++ b/Documentation/filesystems/relay.txt
@@ -0,0 +1,479 @@
+relay interface (formerly relayfs)
+==================================
+
+The relay interface provides a means for kernel applications to
+efficiently log and transfer large quantities of data from the kernel
+to userspace via user-defined 'relay channels'.
+
+A 'relay channel' is a kernel->user data relay mechanism implemented
+as a set of per-cpu kernel buffers ('channel buffers'), each
+represented as a regular file ('relay file') in user space. Kernel
+clients write into the channel buffers using efficient write
+functions; these automatically log into the current cpu's channel
+buffer. User space applications mmap() or read() from the relay files
+and retrieve the data as it becomes available. The relay files
+themselves are files created in a host filesystem, e.g. debugfs, and
+are associated with the channel buffers using the API described below.
+
+The format of the data logged into the channel buffers is completely
+up to the kernel client; the relay interface does however provide
+hooks which allow kernel clients to impose some structure on the
+buffer data. The relay interface doesn't implement any form of data
+filtering - this also is left to the kernel client. The purpose is to
+keep things as simple as possible.
+
+This document provides an overview of the relay interface API. The
+details of the function parameters are documented along with the
+functions in the relay interface code - please see that for details.
+
+Semantics
+=========
+
+Each relay channel has one buffer per CPU, each buffer has one or more
+sub-buffers. Messages are written to the first sub-buffer until it is
+too full to contain a new message, in which case it it is written to
+the next (if available). Messages are never split across sub-buffers.
+At this point, userspace can be notified so it empties the first
+sub-buffer, while the kernel continues writing to the next.
+
+When notified that a sub-buffer is full, the kernel knows how many
+bytes of it are padding i.e. unused space occurring because a complete
+message couldn't fit into a sub-buffer. Userspace can use this
+knowledge to copy only valid data.
+
+After copying it, userspace can notify the kernel that a sub-buffer
+has been consumed.
+
+A relay channel can operate in a mode where it will overwrite data not
+yet collected by userspace, and not wait for it to be consumed.
+
+The relay channel itself does not provide for communication of such
+data between userspace and kernel, allowing the kernel side to remain
+simple and not impose a single interface on userspace. It does
+provide a set of examples and a separate helper though, described
+below.
+
+The read() interface both removes padding and internally consumes the
+read sub-buffers; thus in cases where read(2) is being used to drain
+the channel buffers, special-purpose communication between kernel and
+user isn't necessary for basic operation.
+
+One of the major goals of the relay interface is to provide a low
+overhead mechanism for conveying kernel data to userspace. While the
+read() interface is easy to use, it's not as efficient as the mmap()
+approach; the example code attempts to make the tradeoff between the
+two approaches as small as possible.
+
+klog and relay-apps example code
+================================
+
+The relay interface itself is ready to use, but to make things easier,
+a couple simple utility functions and a set of examples are provided.
+
+The relay-apps example tarball, available on the relay sourceforge
+site, contains a set of self-contained examples, each consisting of a
+pair of .c files containing boilerplate code for each of the user and
+kernel sides of a relay application. When combined these two sets of
+boilerplate code provide glue to easily stream data to disk, without
+having to bother with mundane housekeeping chores.
+
+The 'klog debugging functions' patch (klog.patch in the relay-apps
+tarball) provides a couple of high-level logging functions to the
+kernel which allow writing formatted text or raw data to a channel,
+regardless of whether a channel to write into exists or not, or even
+whether the relay interface is compiled into the kernel or not. These
+functions allow you to put unconditional 'trace' statements anywhere
+in the kernel or kernel modules; only when there is a 'klog handler'
+registered will data actually be logged (see the klog and kleak
+examples for details).
+
+It is of course possible to use the relay interface from scratch,
+i.e. without using any of the relay-apps example code or klog, but
+you'll have to implement communication between userspace and kernel,
+allowing both to convey the state of buffers (full, empty, amount of
+padding). The read() interface both removes padding and internally
+consumes the read sub-buffers; thus in cases where read(2) is being
+used to drain the channel buffers, special-purpose communication
+between kernel and user isn't necessary for basic operation. Things
+such as buffer-full conditions would still need to be communicated via
+some channel though.
+
+klog and the relay-apps examples can be found in the relay-apps
+tarball on http://relayfs.sourceforge.net
+
+The relay interface user space API
+==================================
+
+The relay interface implements basic file operations for user space
+access to relay channel buffer data. Here are the file operations
+that are available and some comments regarding their behavior:
+
+open() enables user to open an _existing_ channel buffer.
+
+mmap() results in channel buffer being mapped into the caller's
+ memory space. Note that you can't do a partial mmap - you
+ must map the entire file, which is NRBUF * SUBBUFSIZE.
+
+read() read the contents of a channel buffer. The bytes read are
+ 'consumed' by the reader, i.e. they won't be available
+ again to subsequent reads. If the channel is being used
+ in no-overwrite mode (the default), it can be read at any
+ time even if there's an active kernel writer. If the
+ channel is being used in overwrite mode and there are
+ active channel writers, results may be unpredictable -
+ users should make sure that all logging to the channel has
+ ended before using read() with overwrite mode. Sub-buffer
+ padding is automatically removed and will not be seen by
+ the reader.
+
+sendfile() transfer data from a channel buffer to an output file
+ descriptor. Sub-buffer padding is automatically removed
+ and will not be seen by the reader.
+
+poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are
+ notified when sub-buffer boundaries are crossed.
+
+close() decrements the channel buffer's refcount. When the refcount
+ reaches 0, i.e. when no process or kernel client has the
+ buffer open, the channel buffer is freed.
+
+In order for a user application to make use of relay files, the
+host filesystem must be mounted. For example,
+
+ mount -t debugfs debugfs /debug
+
+NOTE: the host filesystem doesn't need to be mounted for kernel
+ clients to create or use channels - it only needs to be
+ mounted when user space applications need access to the buffer
+ data.
+
+
+The relay interface kernel API
+==============================
+
+Here's a summary of the API the relay interface provides to in-kernel clients:
+
+TBD(curr. line MT:/API/)
+ channel management functions:
+
+ relay_open(base_filename, parent, subbuf_size, n_subbufs,
+ callbacks)
+ relay_close(chan)
+ relay_flush(chan)
+ relay_reset(chan)
+
+ channel management typically called on instigation of userspace:
+
+ relay_subbufs_consumed(chan, cpu, subbufs_consumed)
+
+ write functions:
+
+ relay_write(chan, data, length)
+ __relay_write(chan, data, length)
+ relay_reserve(chan, length)
+
+ callbacks:
+
+ subbuf_start(buf, subbuf, prev_subbuf, prev_padding)
+ buf_mapped(buf, filp)
+ buf_unmapped(buf, filp)
+ create_buf_file(filename, parent, mode, buf, is_global)
+ remove_buf_file(dentry)
+
+ helper functions:
+
+ relay_buf_full(buf)
+ subbuf_start_reserve(buf, length)
+
+
+Creating a channel
+------------------
+
+relay_open() is used to create a channel, along with its per-cpu
+channel buffers. Each channel buffer will have an associated file
+created for it in the host filesystem, which can be and mmapped or
+read from in user space. The files are named basename0...basenameN-1
+where N is the number of online cpus, and by default will be created
+in the root of the filesystem (if the parent param is NULL). If you
+want a directory structure to contain your relay files, you should
+create it using the host filesystem's directory creation function,
+e.g. debugfs_create_dir(), and pass the parent directory to
+relay_open(). Users are responsible for cleaning up any directory
+structure they create, when the channel is closed - again the host
+filesystem's directory removal functions should be used for that,
+e.g. debugfs_remove().
+
+In order for a channel to be created and the host filesystem's files
+associated with its channel buffers, the user must provide definitions
+for two callback functions, create_buf_file() and remove_buf_file().
+create_buf_file() is called once for each per-cpu buffer from
+relay_open() and allows the user to create the file which will be used
+to represent the corresponding channel buffer. The callback should
+return the dentry of the file created to represent the channel buffer.
+remove_buf_file() must also be defined; it's responsible for deleting
+the file(s) created in create_buf_file() and is called during
+relay_close().
+
+Here are some typical definitions for these callbacks, in this case
+using debugfs:
+
+/*
+ * create_buf_file() callback. Creates relay file in debugfs.
+ */
+static struct dentry *create_buf_file_handler(const char *filename,
+ struct dentry *parent,
+ int mode,
+ struct rchan_buf *buf,
+ int *is_global)
+{
+ return debugfs_create_file(filename, mode, parent, buf,
+ &relay_file_operations);
+}
+
+/*
+ * remove_buf_file() callback. Removes relay file from debugfs.
+ */
+static int remove_buf_file_handler(struct dentry *dentry)
+{
+ debugfs_remove(dentry);
+
+ return 0;
+}
+
+/*
+ * relay interface callbacks
+ */
+static struct rchan_callbacks relay_callbacks =
+{
+ .create_buf_file = create_buf_file_handler,
+ .remove_buf_file = remove_buf_file_handler,
+};
+
+And an example relay_open() invocation using them:
+
+ chan = relay_open("cpu", NULL, SUBBUF_SIZE, N_SUBBUFS, &relay_callbacks);
+
+If the create_buf_file() callback fails, or isn't defined, channel
+creation and thus relay_open() will fail.
+
+The total size of each per-cpu buffer is calculated by multiplying the
+number of sub-buffers by the sub-buffer size passed into relay_open().
+The idea behind sub-buffers is that they're basically an extension of
+double-buffering to N buffers, and they also allow applications to
+easily implement random-access-on-buffer-boundary schemes, which can
+be important for some high-volume applications. The number and size
+of sub-buffers is completely dependent on the application and even for
+the same application, different conditions will warrant different
+values for these parameters at different times. Typically, the right
+values to use are best decided after some experimentation; in general,
+though, it's safe to assume that having only 1 sub-buffer is a bad
+idea - you're guaranteed to either overwrite data or lose events
+depending on the channel mode being used.
+
+The create_buf_file() implementation can also be defined in such a way
+as to allow the creation of a single 'global' buffer instead of the
+default per-cpu set. This can be useful for applications interested
+mainly in seeing the relative ordering of system-wide events without
+the need to bother with saving explicit timestamps for the purpose of
+merging/sorting per-cpu files in a postprocessing step.
+
+To have relay_open() create a global buffer, the create_buf_file()
+implementation should set the value of the is_global outparam to a
+non-zero value in addition to creating the file that will be used to
+represent the single buffer. In the case of a global buffer,
+create_buf_file() and remove_buf_file() will be called only once. The
+normal channel-writing functions, e.g. relay_write(), can still be
+used - writes from any cpu will transparently end up in the global
+buffer - but since it is a global buffer, callers should make sure
+they use the proper locking for such a buffer, either by wrapping
+writes in a spinlock, or by copying a write function from relay.h and
+creating a local version that internally does the proper locking.
+
+Channel 'modes'
+---------------
+
+relay channels can be used in either of two modes - 'overwrite' or
+'no-overwrite'. The mode is entirely determined by the implementation
+of the subbuf_start() callback, as described below. The default if no
+subbuf_start() callback is defined is 'no-overwrite' mode. If the
+default mode suits your needs, and you plan to use the read()
+interface to retrieve channel data, you can ignore the details of this
+section, as it pertains mainly to mmap() implementations.
+
+In 'overwrite' mode, also known as 'flight recorder' mode, writes
+continuously cycle around the buffer and will never fail, but will
+unconditionally overwrite old data regardless of whether it's actually
+been consumed. In no-overwrite mode, writes will fail, i.e. data will
+be lost, if the number of unconsumed sub-buffers equals the total
+number of sub-buffers in the channel. It should be clear that if
+there is no consumer or if the consumer can't consume sub-buffers fast
+enough, data will be lost in either case; the only difference is
+whether data is lost from the beginning or the end of a buffer.
+
+As explained above, a relay channel is made of up one or more
+per-cpu channel buffers, each implemented as a circular buffer
+subdivided into one or more sub-buffers. Messages are written into
+the current sub-buffer of the channel's current per-cpu buffer via the
+write functions described below. Whenever a message can't fit into
+the current sub-buffer, because there's no room left for it, the
+client is notified via the subbuf_start() callback that a switch to a
+new sub-buffer is about to occur. The client uses this callback to 1)
+initialize the next sub-buffer if appropriate 2) finalize the previous
+sub-buffer if appropriate and 3) return a boolean value indicating
+whether or not to actually move on to the next sub-buffer.
+
+To implement 'no-overwrite' mode, the userspace client would provide
+an implementation of the subbuf_start() callback something like the
+following:
+
+static int subbuf_start(struct rchan_buf *buf,
+ void *subbuf,
+ void *prev_subbuf,
+ unsigned int prev_padding)
+{
+ if (prev_subbuf)
+ *((unsigned *)prev_subbuf) = prev_padding;
+
+ if (relay_buf_full(buf))
+ return 0;
+
+ subbuf_start_reserve(buf, sizeof(unsigned int));
+
+ return 1;
+}
+
+If the current buffer is full, i.e. all sub-buffers remain unconsumed,
+the callback returns 0 to indicate that the buffer switch should not
+occur yet, i.e. until the consumer has had a chance to read the
+current set of ready sub-buffers. For the relay_buf_full() function
+to make sense, the consumer is reponsible for notifying the relay
+interface when sub-buffers have been consumed via
+relay_subbufs_consumed(). Any subsequent attempts to write into the
+buffer will again invoke the subbuf_start() callback with the same
+parameters; only when the consumer has consumed one or more of the
+ready sub-buffers will relay_buf_full() return 0, in which case the
+buffer switch can continue.
+
+The implementation of the subbuf_start() callback for 'overwrite' mode
+would be very similar:
+
+static int subbuf_start(struct rchan_buf *buf,
+ void *subbuf,
+ void *prev_subbuf,
+ unsigned int prev_padding)
+{
+ if (prev_subbuf)
+ *((unsigned *)prev_subbuf) = prev_padding;
+
+ subbuf_start_reserve(buf, sizeof(unsigned int));
+
+ return 1;
+}
+
+In this case, the relay_buf_full() check is meaningless and the
+callback always returns 1, causing the buffer switch to occur
+unconditionally. It's also meaningless for the client to use the
+relay_subbufs_consumed() function in this mode, as it's never
+consulted.
+
+The default subbuf_start() implementation, used if the client doesn't
+define any callbacks, or doesn't define the subbuf_start() callback,
+implements the simplest possible 'no-overwrite' mode, i.e. it does
+nothing but return 0.
+
+Header information can be reserved at the beginning of each sub-buffer
+by calling the subbuf_start_reserve() helper function from within the
+subbuf_start() callback. This reserved area can be used to store
+whatever information the client wants. In the example above, room is
+reserved in each sub-buffer to store the padding count for that
+sub-buffer. This is filled in for the previous sub-buffer in the
+subbuf_start() implementation; the padding value for the previous
+sub-buffer is passed into the subbuf_start() callback along with a
+pointer to the previous sub-buffer, since the padding value isn't
+known until a sub-buffer is filled. The subbuf_start() callback is
+also called for the first sub-buffer when the channel is opened, to
+give the client a chance to reserve space in it. In this case the
+previous sub-buffer pointer passed into the callback will be NULL, so
+the client should check the value of the prev_subbuf pointer before
+writing into the previous sub-buffer.
+
+Writing to a channel
+--------------------
+
+Kernel clients write data into the current cpu's channel buffer using
+relay_write() or __relay_write(). relay_write() is the main logging
+function - it uses local_irqsave() to protect the buffer and should be
+used if you might be logging from interrupt context. If you know
+you'll never be logging from interrupt context, you can use
+__relay_write(), which only disables preemption. These functions
+don't return a value, so you can't determine whether or not they
+failed - the assumption is that you wouldn't want to check a return
+value in the fast logging path anyway, and that they'll always succeed
+unless the buffer is full and no-overwrite mode is being used, in
+which case you can detect a failed write in the subbuf_start()
+callback by calling the relay_buf_full() helper function.
+
+relay_reserve() is used to reserve a slot in a channel buffer which
+can be written to later. This would typically be used in applications
+that need to write directly into a channel buffer without having to
+stage data in a temporary buffer beforehand. Because the actual write
+may not happen immediately after the slot is reserved, applications
+using relay_reserve() can keep a count of the number of bytes actually
+written, either in space reserved in the sub-buffers themselves or as
+a separate array. See the 'reserve' example in the relay-apps tarball
+at http://relayfs.sourceforge.net for an example of how this can be
+done. Because the write is under control of the client and is
+separated from the reserve, relay_reserve() doesn't protect the buffer
+at all - it's up to the client to provide the appropriate
+synchronization when using relay_reserve().
+
+Closing a channel
+-----------------
+
+The client calls relay_close() when it's finished using the channel.
+The channel and its associated buffers are destroyed when there are no
+longer any references to any of the channel buffers. relay_flush()
+forces a sub-buffer switch on all the channel buffers, and can be used
+to finalize and process the last sub-buffers before the channel is
+closed.
+
+Misc
+----
+
+Some applications may want to keep a channel around and re-use it
+rather than open and close a new channel for each use. relay_reset()
+can be used for this purpose - it resets a channel to its initial
+state without reallocating channel buffer memory or destroying
+existing mappings. It should however only be called when it's safe to
+do so, i.e. when the channel isn't currently being written to.
+
+Finally, there are a couple of utility callbacks that can be used for
+different purposes. buf_mapped() is called whenever a channel buffer
+is mmapped from user space and buf_unmapped() is called when it's
+unmapped. The client can use this notification to trigger actions
+within the kernel application, such as enabling/disabling logging to
+the channel.
+
+
+Resources
+=========
+
+For news, example code, mailing list, etc. see the relay interface homepage:
+
+ http://relayfs.sourceforge.net
+
+
+Credits
+=======
+
+The ideas and specs for the relay interface came about as a result of
+discussions on tracing involving the following:
+
+Michel Dagenais <michel.dagenais@polymtl.ca>
+Richard Moore <richardj_moore@uk.ibm.com>
+Bob Wisniewski <bob@watson.ibm.com>
+Karim Yaghmour <karim@opersys.com>
+Tom Zanussi <zanussi@us.ibm.com>
+
+Also thanks to Hubertus Franke for a lot of useful suggestions and bug
+reports.
diff --git a/Documentation/filesystems/relayfs.txt b/Documentation/filesystems/relayfs.txt
deleted file mode 100644
index 5832377b734..00000000000
--- a/Documentation/filesystems/relayfs.txt
+++ /dev/null
@@ -1,442 +0,0 @@
-
-relayfs - a high-speed data relay filesystem
-============================================
-
-relayfs is a filesystem designed to provide an efficient mechanism for
-tools and facilities to relay large and potentially sustained streams
-of data from kernel space to user space.
-
-The main abstraction of relayfs is the 'channel'. A channel consists
-of a set of per-cpu kernel buffers each represented by a file in the
-relayfs filesystem. Kernel clients write into a channel using
-efficient write functions which automatically log to the current cpu's
-channel buffer. User space applications mmap() the per-cpu files and
-retrieve the data as it becomes available.
-
-The format of the data logged into the channel buffers is completely
-up to the relayfs client; relayfs does however provide hooks which
-allow clients to impose some structure on the buffer data. Nor does
-relayfs implement any form of data filtering - this also is left to
-the client. The purpose is to keep relayfs as simple as possible.
-
-This document provides an overview of the relayfs API. The details of
-the function parameters are documented along with the functions in the
-filesystem code - please see that for details.
-
-Semantics
-=========
-
-Each relayfs channel has one buffer per CPU, each buffer has one or
-more sub-buffers. Messages are written to the first sub-buffer until
-it is too full to contain a new message, in which case it it is
-written to the next (if available). Messages are never split across
-sub-buffers. At this point, userspace can be notified so it empties
-the first sub-buffer, while the kernel continues writing to the next.
-
-When notified that a sub-buffer is full, the kernel knows how many
-bytes of it are padding i.e. unused. Userspace can use this knowledge
-to copy only valid data.
-
-After copying it, userspace can notify the kernel that a sub-buffer
-has been consumed.
-
-relayfs can operate in a mode where it will overwrite data not yet
-collected by userspace, and not wait for it to consume it.
-
-relayfs itself does not provide for communication of such data between
-userspace and kernel, allowing the kernel side to remain simple and
-not impose a single interface on userspace. It does provide a set of
-examples and a separate helper though, described below.
-
-klog and relay-apps example code
-================================
-
-relayfs itself is ready to use, but to make things easier, a couple
-simple utility functions and a set of examples are provided.
-
-The relay-apps example tarball, available on the relayfs sourceforge
-site, contains a set of self-contained examples, each consisting of a
-pair of .c files containing boilerplate code for each of the user and
-kernel sides of a relayfs application; combined these two sets of
-boilerplate code provide glue to easily stream data to disk, without
-having to bother with mundane housekeeping chores.
-
-The 'klog debugging functions' patch (klog.patch in the relay-apps
-tarball) provides a couple of high-level logging functions to the
-kernel which allow writing formatted text or raw data to a channel,
-regardless of whether a channel to write into exists or not, or
-whether relayfs is compiled into the kernel or is configured as a
-module. These functions allow you to put unconditional 'trace'
-statements anywhere in the kernel or kernel modules; only when there
-is a 'klog handler' registered will data actually be logged (see the
-klog and kleak examples for details).
-
-It is of course possible to use relayfs from scratch i.e. without
-using any of the relay-apps example code or klog, but you'll have to
-implement communication between userspace and kernel, allowing both to
-convey the state of buffers (full, empty, amount of padding).
-
-klog and the relay-apps examples can be found in the relay-apps
-tarball on http://relayfs.sourceforge.net
-
-
-The relayfs user space API
-==========================
-
-relayfs implements basic file operations for user space access to
-relayfs channel buffer data. Here are the file operations that are
-available and some comments regarding their behavior:
-
-open() enables user to open an _existing_ buffer.
-
-mmap() results in channel buffer being mapped into the caller's
- memory space. Note that you can't do a partial mmap - you must
- map the entire file, which is NRBUF * SUBBUFSIZE.
-
-read() read the contents of a channel buffer. The bytes read are
- 'consumed' by the reader i.e. they won't be available again
- to subsequent reads. If the channel is being used in
- no-overwrite mode (the default), it can be read at any time
- even if there's an active kernel writer. If the channel is
- being used in overwrite mode and there are active channel
- writers, results may be unpredictable - users should make
- sure that all logging to the channel has ended before using
- read() with overwrite mode.
-
-poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are
- notified when sub-buffer boundaries are crossed.
-
-close() decrements the channel buffer's refcount. When the refcount
- reaches 0 i.e. when no process or kernel client has the buffer
- open, the channel buffer is freed.
-
-
-In order for a user application to make use of relayfs files, the
-relayfs filesystem must be mounted. For example,
-
- mount -t relayfs relayfs /mnt/relay
-
-NOTE: relayfs doesn't need to be mounted for kernel clients to create
- or use channels - it only needs to be mounted when user space
- applications need access to the buffer data.
-
-
-The relayfs kernel API
-======================
-
-Here's a summary of the API relayfs provides to in-kernel clients:
-
-
- channel management functions:
-
- relay_open(base_filename, parent, subbuf_size, n_subbufs,
- callbacks)
- relay_close(chan)
- relay_flush(chan)
- relay_reset(chan)
- relayfs_create_dir(name, parent)
- relayfs_remove_dir(dentry)
- relayfs_create_file(name, parent, mode, fops, data)
- relayfs_remove_file(dentry)
-
- channel management typically called on instigation of userspace:
-
- relay_subbufs_consumed(chan, cpu, subbufs_consumed)
-
- write functions:
-
- relay_write(chan, data, length)
- __relay_write(chan, data, length)
- relay_reserve(chan, length)
-
- callbacks:
-
- subbuf_start(buf, subbuf, prev_subbuf, prev_padding)
- buf_mapped(buf, filp)
- buf_unmapped(buf, filp)
- create_buf_file(filename, parent, mode, buf, is_global)
- remove_buf_file(dentry)
-
- helper functions:
-
- relay_buf_full(buf)
- subbuf_start_reserve(buf, length)
-
-
-Creating a channel
-------------------
-
-relay_open() is used to create a channel, along with its per-cpu
-channel buffers. Each channel buffer will have an associated file
-created for it in the relayfs filesystem, which can be opened and
-mmapped from user space if desired. The files are named
-basename0...basenameN-1 where N is the number of online cpus, and by
-default will be created in the root of the filesystem. If you want a
-directory structure to contain your relayfs files, you can create it
-with relayfs_create_dir() and pass the parent directory to
-relay_open(). Clients are responsible for cleaning up any directory
-structure they create when the channel is closed - use
-relayfs_remove_dir() for that.
-
-The total size of each per-cpu buffer is calculated by multiplying the
-number of sub-buffers by the sub-buffer size passed into relay_open().
-The idea behind sub-buffers is that they're basically an extension of
-double-buffering to N buffers, and they also allow applications to
-easily implement random-access-on-buffer-boundary schemes, which can
-be important for some high-volume applications. The number and size
-of sub-buffers is completely dependent on the application and even for
-the same application, different conditions will warrant different
-values for these parameters at different times. Typically, the right
-values to use are best decided after some experimentation; in general,
-though, it's safe to assume that having only 1 sub-buffer is a bad
-idea - you're guaranteed to either overwrite data or lose events
-depending on the channel mode being used.
-
-Channel 'modes'
----------------
-
-relayfs channels can be used in either of two modes - 'overwrite' or
-'no-overwrite'. The mode is entirely determined by the implementation
-of the subbuf_start() callback, as described below. In 'overwrite'
-mode, also known as 'flight recorder' mode, writes continuously cycle
-around the buffer and will never fail, but will unconditionally
-overwrite old data regardless of whether it's actually been consumed.
-In no-overwrite mode, writes will fail i.e. data will be lost, if the
-number of unconsumed sub-buffers equals the total number of
-sub-buffers in the channel. It should be clear that if there is no
-consumer or if the consumer can't consume sub-buffers fast enought,
-data will be lost in either case; the only difference is whether data
-is lost from the beginning or the end of a buffer.
-
-As explained above, a relayfs channel is made of up one or more
-per-cpu channel buffers, each implemented as a circular buffer
-subdivided into one or more sub-buffers. Messages are written into
-the current sub-buffer of the channel's current per-cpu buffer via the
-write functions described below. Whenever a message can't fit into
-the current sub-buffer, because there's no room left for it, the
-client is notified via the subbuf_start() callback that a switch to a
-new sub-buffer is about to occur. The client uses this callback to 1)
-initialize the next sub-buffer if appropriate 2) finalize the previous
-sub-buffer if appropriate and 3) return a boolean value indicating
-whether or not to actually go ahead with the sub-buffer switch.
-
-To implement 'no-overwrite' mode, the userspace client would provide
-an implementation of the subbuf_start() callback something like the
-following:
-
-static int subbuf_start(struct rchan_buf *buf,
- void *subbuf,
- void *prev_subbuf,
- unsigned int prev_padding)
-{
- if (prev_subbuf)
- *((unsigned *)prev_subbuf) = prev_padding;
-
- if (relay_buf_full(buf))
- return 0;
-
- subbuf_start_reserve(buf, sizeof(unsigned int));
-
- return 1;
-}
-
-If the current buffer is full i.e. all sub-buffers remain unconsumed,
-the callback returns 0 to indicate that the buffer switch should not
-occur yet i.e. until the consumer has had a chance to read the current
-set of ready sub-buffers. For the relay_buf_full() function to make
-sense, the consumer is reponsible for notifying relayfs when
-sub-buffers have been consumed via relay_subbufs_consumed(). Any
-subsequent attempts to write into the buffer will again invoke the
-subbuf_start() callback with the same parameters; only when the
-consumer has consumed one or more of the ready sub-buffers will
-relay_buf_full() return 0, in which case the buffer switch can
-continue.
-
-The implementation of the subbuf_start() callback for 'overwrite' mode
-would be very similar:
-
-static int subbuf_start(struct rchan_buf *buf,
- void *subbuf,
- void *prev_subbuf,
- unsigned int prev_padding)
-{
- if (prev_subbuf)
- *((unsigned *)prev_subbuf) = prev_padding;
-
- subbuf_start_reserve(buf, sizeof(unsigned int));
-
- return 1;
-}
-
-In this case, the relay_buf_full() check is meaningless and the
-callback always returns 1, causing the buffer switch to occur
-unconditionally. It's also meaningless for the client to use the
-relay_subbufs_consumed() function in this mode, as it's never
-consulted.
-
-The default subbuf_start() implementation, used if the client doesn't
-define any callbacks, or doesn't define the subbuf_start() callback,
-implements the simplest possible 'no-overwrite' mode i.e. it does
-nothing but return 0.
-
-Header information can be reserved at the beginning of each sub-buffer
-by calling the subbuf_start_reserve() helper function from within the
-subbuf_start() callback. This reserved area can be used to store
-whatever information the client wants. In the example above, room is
-reserved in each sub-buffer to store the padding count for that
-sub-buffer. This is filled in for the previous sub-buffer in the
-subbuf_start() implementation; the padding value for the previous
-sub-buffer is passed into the subbuf_start() callback along with a
-pointer to the previous sub-buffer, since the padding value isn't
-known until a sub-buffer is filled. The subbuf_start() callback is
-also called for the first sub-buffer when the channel is opened, to
-give the client a chance to reserve space in it. In this case the
-previous sub-buffer pointer passed into the callback will be NULL, so
-the client should check the value of the prev_subbuf pointer before
-writing into the previous sub-buffer.
-
-Writing to a channel
---------------------
-
-kernel clients write data into the current cpu's channel buffer using
-relay_write() or __relay_write(). relay_write() is the main logging
-function - it uses local_irqsave() to protect the buffer and should be
-used if you might be logging from interrupt context. If you know
-you'll never be logging from interrupt context, you can use
-__relay_write(), which only disables preemption. These functions
-don't return a value, so you can't determine whether or not they
-failed - the assumption is that you wouldn't want to check a return
-value in the fast logging path anyway, and that they'll always succeed
-unless the buffer is full and no-overwrite mode is being used, in
-which case you can detect a failed write in the subbuf_start()
-callback by calling the relay_buf_full() helper function.
-
-relay_reserve() is used to reserve a slot in a channel buffer which
-can be written to later. This would typically be used in applications
-that need to write directly into a channel buffer without having to
-stage data in a temporary buffer beforehand. Because the actual write
-may not happen immediately after the slot is reserved, applications
-using relay_reserve() can keep a count of the number of bytes actually
-written, either in space reserved in the sub-buffers themselves or as
-a separate array. See the 'reserve' example in the relay-apps tarball
-at http://relayfs.sourceforge.net for an example of how this can be
-done. Because the write is under control of the client and is
-separated from the reserve, relay_reserve() doesn't protect the buffer
-at all - it's up to the client to provide the appropriate
-synchronization when using relay_reserve().
-
-Closing a channel
------------------
-
-The client calls relay_close() when it's finished using the channel.
-The channel and its associated buffers are destroyed when there are no
-longer any references to any of the channel buffers. relay_flush()
-forces a sub-buffer switch on all the channel buffers, and can be used
-to finalize and process the last sub-buffers before the channel is
-closed.
-
-Creating non-relay files
-------------------------
-
-relay_open() automatically creates files in the relayfs filesystem to
-represent the per-cpu kernel buffers; it's often useful for
-applications to be able to create their own files alongside the relay
-files in the relayfs filesystem as well e.g. 'control' files much like
-those created in /proc or debugfs for similar purposes, used to
-communicate control information between the kernel and user sides of a
-relayfs application. For this purpose the relayfs_create_file() and
-relayfs_remove_file() API functions exist. For relayfs_create_file(),
-the caller passes in a set of user-defined file operations to be used
-for the file and an optional void * to a user-specified data item,
-which will be accessible via inode->u.generic_ip (see the relay-apps
-tarball for examples). The file_operations are a required parameter
-to relayfs_create_file() and thus the semantics of these files are
-completely defined by the caller.
-
-See the relay-apps tarball at http://relayfs.sourceforge.net for
-examples of how these non-relay files are meant to be used.
-
-Creating relay files in other filesystems
------------------------------------------
-
-By default of course, relay_open() creates relay files in the relayfs
-filesystem. Because relay_file_operations is exported, however, it's
-also possible to create and use relay files in other pseudo-filesytems
-such as debugfs.
-
-For this purpose, two callback functions are provided,
-create_buf_file() and remove_buf_file(). create_buf_file() is called
-once for each per-cpu buffer from relay_open() to allow the client to
-create a file to be used to represent the corresponding buffer; if
-this callback is not defined, the default implementation will create
-and return a file in the relayfs filesystem to represent the buffer.
-The callback should return the dentry of the file created to represent
-the relay buffer. Note that the parent directory passed to
-relay_open() (and passed along to the callback), if specified, must
-exist in the same filesystem the new relay file is created in. If
-create_buf_file() is defined, remove_buf_file() must also be defined;
-it's responsible for deleting the file(s) created in create_buf_file()
-and is called during relay_close().
-
-The create_buf_file() implementation can also be defined in such a way
-as to allow the creation of a single 'global' buffer instead of the
-default per-cpu set. This can be useful for applications interested
-mainly in seeing the relative ordering of system-wide events without
-the need to bother with saving explicit timestamps for the purpose of
-merging/sorting per-cpu files in a postprocessing step.
-
-To have relay_open() create a global buffer, the create_buf_file()
-implementation should set the value of the is_global outparam to a
-non-zero value in addition to creating the file that will be used to
-represent the single buffer. In the case of a global buffer,
-create_buf_file() and remove_buf_file() will be called only once. The
-normal channel-writing functions e.g. relay_write() can still be used
-- writes from any cpu will transparently end up in the global buffer -
-but since it is a global buffer, callers should make sure they use the
-proper locking for such a buffer, either by wrapping writes in a
-spinlock, or by copying a write function from relayfs_fs.h and
-creating a local version that internally does the proper locking.
-
-See the 'exported-relayfile' examples in the relay-apps tarball for
-examples of creating and using relay files in debugfs.
-
-Misc
-----
-
-Some applications may want to keep a channel around and re-use it
-rather than open and close a new channel for each use. relay_reset()
-can be used for this purpose - it resets a channel to its initial
-state without reallocating channel buffer memory or destroying
-existing mappings. It should however only be called when it's safe to
-do so i.e. when the channel isn't currently being written to.
-
-Finally, there are a couple of utility callbacks that can be used for
-different purposes. buf_mapped() is called whenever a channel buffer
-is mmapped from user space and buf_unmapped() is called when it's
-unmapped. The client can use this notification to trigger actions
-within the kernel application, such as enabling/disabling logging to
-the channel.
-
-
-Resources
-=========
-
-For news, example code, mailing list, etc. see the relayfs homepage:
-
- http://relayfs.sourceforge.net
-
-
-Credits
-=======
-
-The ideas and specs for relayfs came about as a result of discussions
-on tracing involving the following:
-
-Michel Dagenais <michel.dagenais@polymtl.ca>
-Richard Moore <richardj_moore@uk.ibm.com>
-Bob Wisniewski <bob@watson.ibm.com>
-Karim Yaghmour <karim@opersys.com>
-Tom Zanussi <zanussi@us.ibm.com>
-
-Also thanks to Hubertus Franke for a lot of useful suggestions and bug
-reports.
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt
index d53b857a371..841c353297e 100644
--- a/Documentation/input/joystick.txt
+++ b/Documentation/input/joystick.txt
@@ -39,7 +39,6 @@ them. Bug reports and success stories are also welcome.
The input project website is at:
- http://www.suse.cz/development/input/
http://atrey.karlin.mff.cuni.cz/~vojtech/input/
There is also a mailing list for the driver at:
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index c173806c91f..a056bbe67c7 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,126 @@
+Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
+
+1. Fixed a bug in megaraid_init_mbox().
+ Customer reported "garbage in file on x86_64 platform".
+ Root Cause: the driver registered controllers as 64-bit DMA capable
+ for those which are not support it.
+ Fix: Made change in the function inserting identification machanism
+ identifying 64-bit DMA capable controllers.
+
+ > -----Original Message-----
+ > From: Vasily Averin [mailto:vvs@sw.ru]
+ > Sent: Thursday, May 04, 2006 2:49 PM
+ > To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul;
+ > Ju, Seokmann; Bagalkote, Sreenivas;
+ > James.Bottomley@SteelEye.com; devel@openvz.org
+ > Subject: megaraid_mbox: garbage in file
+ >
+ > Hello all,
+ >
+ > I've investigated customers claim on the unstable work of
+ > their node and found a
+ > strange effect: reading from some files leads to the
+ > "attempt to access beyond end of device" messages.
+ >
+ > I've checked filesystem, memory on the node, motherboard BIOS
+ > version, but it
+ > does not help and issue still has been reproduced by simple
+ > file reading.
+ >
+ > Reproducer is simple:
+ >
+ > echo 0xffffffff >/proc/sys/dev/scsi/logging_level ;
+ > cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt ;
+ > echo 0 >/proc/sys/dev/scsi/logging
+ >
+ > It leads to the following messages in dmesg
+ >
+ > sd_init_command: disk=sda, block=871769260, count=26
+ > sda : block=871769260
+ > sda : reading 26/26 512 byte blocks.
+ > scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420)
+ > sd 0:1:0:0: send 0xf79ed980 sd 0:1:0:0:
+ > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
+ > buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40,
+ > queuecommand 0xc0344010
+ > leaving scsi_dispatch_cmnd()
+ > scsi_delete_timer: scmd: f79ed980, rtn: 1
+ > sd 0:1:0:0: done 0xf79ed980 SUCCESS 0 sd 0:1:0:0:
+ > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
+ > scsi host busy 1 failed 0
+ > sd 0:1:0:0: Notifying upper driver of completion (result 0)
+ > sd_rw_intr: sda: res=0x0
+ > 26 sectors total, 13312 bytes done.
+ > use_sg is 4
+ > attempt to access beyond end of device
+ > sda6: rw=0, want=1044134458, limit=951401367
+ > Buffer I/O error on device sda6, logical block 522067228
+ > attempt to access beyond end of device
+
+2. When INQUIRY with EVPD bit set issued to the MegaRAID controller,
+ system memory gets corrupted.
+ Root Cause: MegaRAID F/W handle the INQUIRY with EVPD bit set
+ incorrectly.
+ Fix: MegaRAID F/W has fixed the problem and being process of release,
+ soon. Meanwhile, driver will filter out the request.
+
+3. One of member in the data structure of the driver leads unaligne
+ issue on 64-bit platform.
+ Customer reporeted "kernel unaligned access addrss" issue when
+ application communicates with MegaRAID HBA driver.
+ Root Cause: in uioc_t structure, one of member had misaligned and it
+ led system to display the error message.
+ Fix: A patch submitted to community from following folk.
+
+ > -----Original Message-----
+ > From: linux-scsi-owner@vger.kernel.org
+ > [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Sakurai Hiroomi
+ > Sent: Wednesday, July 12, 2006 4:20 AM
+ > To: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
+ > Subject: Re: Help: strange messages from kernel on IA64 platform
+ >
+ > Hi,
+ >
+ > I saw same message.
+ >
+ > When GAM(Global Array Manager) is started, The following
+ > message output.
+ > kernel: kernel unaligned access to 0xe0000001fe1080d4,
+ > ip=0xa000000200053371
+ >
+ > The uioc structure used by ioctl is defined by packed,
+ > the allignment of each member are disturbed.
+ > In a 64 bit structure, the allignment of member doesn't fit 64 bit
+ > boundary. this causes this messages.
+ > In a 32 bit structure, we don't see the message because the allinment
+ > of member fit 32 bit boundary even if packed is specified.
+ >
+ > patch
+ > I Add 32 bit dummy member to fit 64 bit boundary. I tested.
+ > We confirmed this patch fix the problem by IA64 server.
+ >
+ > **************************************************************
+ > ****************
+ > --- linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h.orig
+ > 2006-04-03 17:13:03.000000000 +0900
+ > +++ linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h
+ > 2006-04-03 17:14:09.000000000 +0900
+ > @@ -132,6 +132,10 @@
+ > /* Driver Data: */
+ > void __user * user_data;
+ > uint32_t user_data_len;
+ > +
+ > + /* 64bit alignment */
+ > + uint32_t pad_0xBC;
+ > +
+ > mraid_passthru_t __user *user_pthru;
+ >
+ > mraid_passthru_t *pthru32;
+ > **************************************************************
+ > ****************
+
Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt
index 0b62c62142c..5c3a5190596 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.txt
@@ -25,6 +25,7 @@ Currently, these files are in /proc/sys/fs:
- inode-state
- overflowuid
- overflowgid
+- suid_dumpable
- super-max
- super-nr
@@ -131,6 +132,25 @@ The default is 65534.
==============================================================
+suid_dumpable:
+
+This value can be used to query and set the core dump mode for setuid
+or otherwise protected/tainted binaries. The modes are
+
+0 - (default) - traditional behaviour. Any process which has changed
+ privilege levels or is execute only will not be dumped
+1 - (debug) - all processes dump core when possible. The core dump is
+ owned by the current user and no security is applied. This is
+ intended for system debugging situations only. Ptrace is unchecked.
+2 - (suidsafe) - any binary which normally would not be dumped is dumped
+ readable by root only. This allows the end user to remove
+ such a dump but not access it directly. For security reasons
+ core dumps in this mode will not overwrite one another or
+ other files. This mode is appropriate when adminstrators are
+ attempting to debug problems in a normal environment.
+
+==============================================================
+
super-max & super-nr:
These numbers control the maximum number of superblocks, and
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 7345c338080..89bf8c20a58 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -50,7 +50,6 @@ show up in /proc/sys/kernel:
- shmmax [ sysv ipc ]
- shmmni
- stop-a [ SPARC only ]
-- suid_dumpable
- sysrq ==> Documentation/sysrq.txt
- tainted
- threads-max
@@ -310,25 +309,6 @@ kernel. This value defaults to SHMMAX.
==============================================================
-suid_dumpable:
-
-This value can be used to query and set the core dump mode for setuid
-or otherwise protected/tainted binaries. The modes are
-
-0 - (default) - traditional behaviour. Any process which has changed
- privilege levels or is execute only will not be dumped
-1 - (debug) - all processes dump core when possible. The core dump is
- owned by the current user and no security is applied. This is
- intended for system debugging situations only. Ptrace is unchecked.
-2 - (suidsafe) - any binary which normally would not be dumped is dumped
- readable by root only. This allows the end user to remove
- such a dump but not access it directly. For security reasons
- core dumps in this mode will not overwrite one another or
- other files. This mode is appropriate when adminstrators are
- attempting to debug problems in a normal environment.
-
-==============================================================
-
tainted:
Non-zero if the kernel has been tainted. Numeric values, which
diff --git a/MAINTAINERS b/MAINTAINERS
index d3315a552be..3bbd7064f94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -889,6 +889,12 @@ M: rdunlap@xenotime.net
T: git http://tali.admingilde.org/git/linux-docbook.git
S: Maintained
+DOCKING STATION DRIVER
+P: Kristen Carlson Accardi
+M: kristen.c.accardi@intel.com
+L: linux-acpi@vger.kernel.org
+S: Maintained
+
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
diff --git a/Makefile b/Makefile
index 8406d02c638..33559b56644 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 18
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME=Crazed Snow-Weasel
# *DOCUMENTATION*
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 5b7c26395b4..028bdc9228f 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -179,17 +179,19 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
static inline struct safe_buffer *
find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
{
- struct safe_buffer *b = NULL;
+ struct safe_buffer *b, *rb = NULL;
unsigned long flags;
read_lock_irqsave(&device_info->lock, flags);
list_for_each_entry(b, &device_info->safe_buffers, node)
- if (b->safe_dma_addr == safe_dma_addr)
+ if (b->safe_dma_addr == safe_dma_addr) {
+ rb = b;
break;
+ }
read_unlock_irqrestore(&device_info->lock, flags);
- return b;
+ return rb;
}
static inline void
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7ea5f01dfc7..de4e3313790 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -634,6 +634,14 @@ ENTRY(__switch_to)
* purpose.
*/
+ .macro usr_ret, reg
+#ifdef CONFIG_ARM_THUMB
+ bx \reg
+#else
+ mov pc, \reg
+#endif
+ .endm
+
.align 5
.globl __kuser_helper_start
__kuser_helper_start:
@@ -675,7 +683,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
- mov pc, lr
+ usr_ret lr
.align 5
@@ -778,7 +786,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
mov r0, #-1
adds r0, r0, #0
#endif
- mov pc, lr
+ usr_ret lr
#else
@@ -792,7 +800,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
#ifdef CONFIG_SMP
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
- mov pc, lr
+ usr_ret lr
#endif
@@ -834,16 +842,11 @@ __kuser_cmpxchg: @ 0xffff0fc0
__kuser_get_tls: @ 0xffff0fe0
#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
-
ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0
- mov pc, lr
-
#else
-
mrc p15, 0, r0, c13, c0, 3 @ read TLS register
- mov pc, lr
-
#endif
+ usr_ret lr
.rep 5
.word 0 @ pad up to __kuser_helper_version
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4fe386eea4b..5365d4e5949 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -118,7 +118,7 @@ ENTRY(secondary_startup)
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r7, r4] @ get secondary_data.pgdir
adr lr, __enable_mmu @ return address
- add pc, r10, #12 @ initialise processor
+ add pc, r10, #PROCINFO_INITFUNC @ initialise processor
@ (return control reg)
/*
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0c7938645df..273e05f2b8d 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -10,45 +10,47 @@ obj-m :=
obj-n :=
obj- :=
+# DMA
+obj-$(CONFIG_S3C2410_DMA) += dma.o
+
# S3C2400 support files
-obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o
+obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o
# S3C2410 support files
-obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
-obj-$(CONFIG_S3C2410_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
# Power Management support
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
+obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
# S3C2412 support
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o
#
# S3C244X support
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
# Clock control
-obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
+obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
# S3C2440 support
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
# S3C2442 support
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o
# bast extras
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 094cc52745c..25855452fe8 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -112,7 +112,7 @@ dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs)
}
static void
-dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
+dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
struct s3c2410_dma_regstate *regs)
{
printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
@@ -132,7 +132,16 @@ dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan)
chan->number, fname, line, chan->load_state,
chan->curr, chan->next, chan->end);
- dmadbg_showregs(fname, line, chan, &state);
+ dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+static void
+dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan)
+{
+ struct s3c2410_dma_regstate state;
+
+ dmadbg_capture(chan, &state);
+ dmadbg_dumpregs(fname, line, chan, &state);
}
#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
@@ -253,10 +262,14 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan,
buf->next);
reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
} else {
- pr_debug("load_state is %d => autoreload\n", chan->load_state);
+ //pr_debug("load_state is %d => autoreload\n", chan->load_state);
reload = S3C2410_DCON_AUTORELOAD;
}
+ if ((buf->data & 0xf0000000) != 0x30000000) {
+ dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
+ }
+
writel(buf->data, chan->addr_reg);
dma_wrreg(chan, S3C2410_DMA_DCON,
@@ -370,7 +383,7 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
tmp |= S3C2410_DMASKTRIG_ON;
dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
- pr_debug("wrote %08lx to DMASKTRIG\n", tmp);
+ pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
#if 0
/* the dma buffer loads should take care of clearing the AUTO
@@ -384,7 +397,30 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
dbg_showchan(chan);
+ /* if we've only loaded one buffer onto the channel, then chec
+ * to see if we have another, and if so, try and load it so when
+ * the first buffer is finished, the new one will be loaded onto
+ * the channel */
+
+ if (chan->next != NULL) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ pr_debug("%s: buff not yet loaded, no more todo\n",
+ __FUNCTION__);
+ } else {
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ }
+
+
local_irq_restore(flags);
+
return 0;
}
@@ -436,12 +472,11 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
if (buf == NULL) {
pr_debug("%s: out of memory (%ld alloc)\n",
- __FUNCTION__, sizeof(*buf));
+ __FUNCTION__, (long)sizeof(*buf));
return -ENOMEM;
}
- pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
-
+ //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
//dbg_showchan(chan);
buf->next = NULL;
@@ -537,14 +572,20 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
case S3C2410_DMALOAD_1LOADED:
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load\n",
- chan->number);
+ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+ chan->number, __FUNCTION__);
return;
}
break;
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ /* I belive in this case we do not have anything to do
+ * until the next buffer comes along, and we turn off the
+ * reload */
+ return;
+
default:
- pr_debug("dma%d: lastxfer: unhandled load_state %d with no next",
+ pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
chan->number, chan->load_state);
return;
@@ -629,7 +670,14 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
} else {
}
- if (chan->next != NULL) {
+ /* only reload if the channel is still running... our buffer done
+ * routine may have altered the state by requesting the dma channel
+ * to stop or shutdown... */
+
+ /* todo: check that when the channel is shut-down from inside this
+ * function, we cope with unsetting reload, etc */
+
+ if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
unsigned long flags;
switch (chan->load_state) {
@@ -644,8 +692,8 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
case S3C2410_DMALOAD_1LOADED:
if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
/* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load\n",
- chan->number);
+ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+ chan->number, __FUNCTION__);
return IRQ_HANDLED;
}
@@ -678,8 +726,6 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
return IRQ_HANDLED;
}
-
-
/* s3c2410_request_dma
*
* get control of an dma channel
@@ -718,11 +764,17 @@ int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client,
pr_debug("dma%d: %s : requesting irq %d\n",
channel, __FUNCTION__, chan->irq);
+ chan->irq_claimed = 1;
+ local_irq_restore(flags);
+
err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
client->name, (void *)chan);
+ local_irq_save(flags);
+
if (err) {
chan->in_use = 0;
+ chan->irq_claimed = 0;
local_irq_restore(flags);
printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
@@ -730,7 +782,6 @@ int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client,
return err;
}
- chan->irq_claimed = 1;
chan->irq_enabled = 1;
}
@@ -810,6 +861,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
tmp |= S3C2410_DMASKTRIG_STOP;
+ //tmp &= ~S3C2410_DMASKTRIG_ON;
dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
#if 0
@@ -819,6 +871,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
#endif
+ /* should stop do this, or should we wait for flush? */
chan->state = S3C2410_DMA_IDLE;
chan->load_state = S3C2410_DMALOAD_NONE;
@@ -827,6 +880,22 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
return 0;
}
+void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan)
+{
+ unsigned long tmp;
+ unsigned int timeout = 0x10000;
+
+ while (timeout-- > 0) {
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+
+ if (!(tmp & S3C2410_DMASKTRIG_ON))
+ return;
+ }
+
+ pr_debug("dma%d: failed to stop?\n", chan->number);
+}
+
+
/* s3c2410_dma_flush
*
* stop the channel, and remove all current and pending transfers
@@ -837,7 +906,9 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
s3c2410_dma_buf_t *buf, *next;
unsigned long flags;
- pr_debug("%s:\n", __FUNCTION__);
+ pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+
+ dbg_showchan(chan);
local_irq_save(flags);
@@ -864,11 +935,64 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
}
}
+ dbg_showregs(chan);
+
+ s3c2410_dma_waitforstop(chan);
+
+#if 0
+ /* should also clear interrupts, according to WinCE BSP */
+ {
+ unsigned long tmp;
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp |= S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+ }
+#endif
+
+ dbg_showregs(chan);
+
local_irq_restore(flags);
return 0;
}
+int
+s3c2410_dma_started(s3c2410_dma_chan_t *chan)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ dbg_showchan(chan);
+
+ /* if we've only loaded one buffer onto the channel, then chec
+ * to see if we have another, and if so, try and load it so when
+ * the first buffer is finished, the new one will be loaded onto
+ * the channel */
+
+ if (chan->next != NULL) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ pr_debug("%s: buff not yet loaded, no more todo\n",
+ __FUNCTION__);
+ } else {
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ }
+
+
+ local_irq_restore(flags);
+
+ return 0;
+
+}
int
s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op)
@@ -885,14 +1009,15 @@ s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op)
return s3c2410_dma_dostop(chan);
case S3C2410_DMAOP_PAUSE:
- return -ENOENT;
-
case S3C2410_DMAOP_RESUME:
return -ENOENT;
case S3C2410_DMAOP_FLUSH:
return s3c2410_dma_flush(chan);
+ case S3C2410_DMAOP_STARTED:
+ return s3c2410_dma_started(chan);
+
case S3C2410_DMAOP_TIMEOUT:
return 0;
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index c4e3f8c6847..f2bbef07b1e 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -285,7 +285,7 @@ static struct flash_platform_data versatile_flash_data = {
static struct resource versatile_flash_resource = {
.start = VERSATILE_FLASH_BASE,
- .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE,
+ .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index f71fb4a029c..b2751eadbc5 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -142,6 +142,7 @@ config X86_SUMMIT
In particular, it is needed for the x440.
If you don't have one of these computers, you should say N here.
+ If you want to build a NUMA kernel, you must select ACPI.
config X86_BIGSMP
bool "Support for other sub-arch SMP systems with more than 8 CPUs"
@@ -169,6 +170,7 @@ config X86_GENERICARCH
help
This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
It is intended for a generic binary kernel.
+ If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
@@ -542,7 +544,7 @@ config X86_PAE
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
- depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || (X86_SUMMIT && ACPI))
+ depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 0db6387025c..ee003bc0e8b 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -59,7 +59,7 @@ static inline int gsi_irq_sharing(int gsi) { return gsi; }
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
- ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+ ((acpi_table_entry_header *)entry)->length < sizeof(*entry))
#define PREFIX "ACPI: "
diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S
index 9f408eee4e6..b781b38131c 100644
--- a/arch/i386/kernel/acpi/wakeup.S
+++ b/arch/i386/kernel/acpi/wakeup.S
@@ -292,7 +292,10 @@ ENTRY(do_suspend_lowlevel)
pushl $3
call acpi_enter_sleep_state
addl $4, %esp
- ret
+
+# In case of S3 failure, we'll emerge here. Jump
+# to ret_point to recover
+ jmp ret_point
.p2align 4,,7
ret_point:
call restore_registers
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index efb41e81351..e6ea00edcb5 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -567,16 +567,11 @@ static struct cpufreq_driver acpi_cpufreq_driver = {
static int __init
acpi_cpufreq_init (void)
{
- int result = 0;
-
dprintk("acpi_cpufreq_init\n");
- result = acpi_cpufreq_early_init_acpi();
+ acpi_cpufreq_early_init_acpi();
- if (!result)
- result = cpufreq_register_driver(&acpi_cpufreq_driver);
-
- return (result);
+ return cpufreq_register_driver(&acpi_cpufreq_driver);
}
diff --git a/arch/i386/pci/init.c b/arch/i386/pci/init.c
index c7650a7e0b0..51087a9d917 100644
--- a/arch/i386/pci/init.c
+++ b/arch/i386/pci/init.c
@@ -14,8 +14,12 @@ static __init int pci_access_init(void)
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
#endif
- if (raw_pci_ops)
- return 0;
+ /*
+ * don't check for raw_pci_ops here because we want pcbios as last
+ * fallback, yet it's needed to run first to set pcibios_last_bus
+ * in case legacy PCI probing is used. otherwise detecting peer busses
+ * fails.
+ */
#ifdef CONFIG_PCI_DIRECT
pci_direct_init();
#endif
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index e545b0992c4..972180f738d 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -178,7 +178,7 @@ static __init void unreachable_devices(void)
pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0));
if (addr == 0 ||
readl((u32 __iomem *)mmcfg_virt_addr) != val1) {
- set_bit(i, fallback_slots);
+ set_bit(i + 32*k, fallback_slots);
printk(KERN_NOTICE
"PCI: No mmconfig possible on %x:%x\n", k, i);
}
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 8a4f0d0d17a..8f0a16a79a6 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -244,7 +244,8 @@ static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
if (scatterlen == 0)
memcpy(sc->request_buffer, buf, len);
- else for (slp = (struct scatterlist *)sc->request_buffer; scatterlen-- > 0 && len > 0; slp++) {
+ else for (slp = (struct scatterlist *)sc->request_buffer;
+ scatterlen-- > 0 && len > 0; slp++) {
unsigned thislen = min(len, slp->length);
memcpy(page_address(slp->page) + slp->offset, buf, thislen);
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 99761b81db4..0176556aeec 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -55,7 +55,7 @@
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
- ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+ ((acpi_table_entry_header *)entry)->length < sizeof(*entry))
#define PREFIX "ACPI: "
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
new file mode 100644
index 00000000000..5f41c1f7a5f
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -0,0 +1,257 @@
+/*
+ * MPC8540 ADS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8540ADS";
+ compatible = "MPC85xxADS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8540@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8540@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 1>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <37 1>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ address = [ 00 E0 0C 00 73 00 ];
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ address = [ 00 E0 0C 00 73 01 ];
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "FEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ address = [ 00 E0 0C 00 73 02 ];
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <19 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452003>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x02 */
+ 1000 0 0 1 40000 31 1
+ 1000 0 0 2 40000 32 1
+ 1000 0 0 3 40000 33 1
+ 1000 0 0 4 40000 34 1
+
+ /* IDSEL 0x03 */
+ 1800 0 0 1 40000 34 1
+ 1800 0 0 2 40000 31 1
+ 1800 0 0 3 40000 32 1
+ 1800 0 0 4 40000 33 1
+
+ /* IDSEL 0x04 */
+ 2000 0 0 1 40000 33 1
+ 2000 0 0 2 40000 34 1
+ 2000 0 0 3 40000 31 1
+ 2000 0 0 4 40000 32 1
+
+ /* IDSEL 0x05 */
+ 2800 0 0 1 40000 32 1
+ 2800 0 0 2 40000 33 1
+ 2800 0 0 3 40000 34 1
+ 2800 0 0 4 40000 31 1
+
+ /* IDSEL 0x0c */
+ 6000 0 0 1 40000 31 1
+ 6000 0 0 2 40000 32 1
+ 6000 0 0 3 40000 33 1
+ 6000 0 0 4 40000 34 1
+
+ /* IDSEL 0x0d */
+ 6800 0 0 1 40000 34 1
+ 6800 0 0 2 40000 31 1
+ 6800 0 0 3 40000 32 1
+ 6800 0 0 4 40000 33 1
+
+ /* IDSEL 0x0e */
+ 7000 0 0 1 40000 33 1
+ 7000 0 0 2 40000 34 1
+ 7000 0 0 3 40000 31 1
+ 7000 0 0 4 40000 32 1
+
+ /* IDSEL 0x0f */
+ 7800 0 0 1 40000 32 1
+ 7800 0 0 2 40000 33 1
+ 7800 0 0 3 40000 34 1
+ 7800 0 0 4 40000 31 1
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 40000 31 1
+ 9000 0 0 2 40000 32 1
+ 9000 0 0 3 40000 33 1
+ 9000 0 0 4 40000 34 1
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 40000 34 1
+ 9800 0 0 2 40000 31 1
+ 9800 0 0 3 40000 32 1
+ 9800 0 0 4 40000 33 1
+
+ /* IDSEL 0x14 */
+ a000 0 0 1 40000 33 1
+ a000 0 0 2 40000 34 1
+ a000 0 0 3 40000 31 1
+ a000 0 0 4 40000 32 1
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 32 1
+ a800 0 0 2 40000 33 1
+ a800 0 0 3 40000 34 1
+ a800 0 0 4 40000 31 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
new file mode 100644
index 00000000000..7be0bc659e1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8541 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8541CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8541@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8541@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
new file mode 100644
index 00000000000..893d7957c17
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -0,0 +1,287 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8548CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8548@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8548@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ ethernet-phy@2 {
+ linux,phandle = <2452002>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@3 {
+ linux,phandle = <2452003>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <d 2 e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <26000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 02 ];
+ interrupts = <f 2 10 2 11 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+/* eTSEC 4 is currently broken
+ ethernet@27000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <27000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 03 ];
+ interrupts = <15 2 16 2 17 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+ */
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
new file mode 100644
index 00000000000..118f5a88765
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -0,0 +1,244 @@
+/*
+ * MPC8555 CDS Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+ model = "MPC8555CDS";
+ compatible = "MPC85xxCDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ linux,phandle = <100>;
+
+ cpus {
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linux,phandle = <200>;
+
+ PowerPC,8555@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>; // 32 bytes
+ i-cache-line-size = <20>; // 32 bytes
+ d-cache-size = <8000>; // L1, 32K
+ i-cache-size = <8000>; // L1, 32K
+ timebase-frequency = <0>; // 33 MHz, from uboot
+ bus-frequency = <0>; // 166 MHz
+ clock-frequency = <0>; // 825 MHz, from uboot
+ 32-bit;
+ linux,phandle = <201>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ linux,phandle = <300>;
+ reg = <00000000 08000000>; // 128M at 0x0
+ };
+
+ soc8555@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ ranges = <0 e0000000 00100000>;
+ reg = <e0000000 00100000>; // CCSRBAR 1M
+ bus-frequency = <0>;
+
+ i2c@3000 {
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <3000 100>;
+ interrupts = <1b 2>;
+ interrupt-parent = <40000>;
+ dfsrr;
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "gianfar";
+ reg = <24520 20>;
+ linux,phandle = <24520>;
+ ethernet-phy@0 {
+ linux,phandle = <2452000>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <0>;
+ device_type = "ethernet-phy";
+ };
+ ethernet-phy@1 {
+ linux,phandle = <2452001>;
+ interrupt-parent = <40000>;
+ interrupts = <35 0>;
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <24000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 00 ];
+ interrupts = <0d 2 0e 2 12 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452000>;
+ };
+
+ ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <25000 1000>;
+ local-mac-address = [ 00 E0 0C 00 73 01 ];
+ interrupts = <13 2 14 2 18 2>;
+ interrupt-parent = <40000>;
+ phy-handle = <2452001>;
+ };
+
+ serial@4500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4500 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ serial@4600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <4600 100>; // reg base, size
+ clock-frequency = <0>; // should we fill in in uboot?
+ interrupts = <1a 2>;
+ interrupt-parent = <40000>;
+ };
+
+ pci@8000 {
+ linux,phandle = <8000>;
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 40000 30 1
+ 08000 0 0 2 40000 31 1
+ 08000 0 0 3 40000 32 1
+ 08000 0 0 4 40000 33 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 40000 30 1
+ 08800 0 0 2 40000 31 1
+ 08800 0 0 3 40000 32 1
+ 08800 0 0 4 40000 33 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 40000 30 1
+ 09000 0 0 2 40000 31 1
+ 09000 0 0 3 40000 32 1
+ 09000 0 0 4 40000 33 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 40000 31 1
+ 09800 0 0 2 40000 32 1
+ 09800 0 0 3 40000 33 1
+ 09800 0 0 4 40000 30 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 40000 32 1
+ 0a000 0 0 2 40000 33 1
+ 0a000 0 0 3 40000 30 1
+ 0a000 0 0 4 40000 31 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 40000 33 1
+ 0a800 0 0 2 40000 30 1
+ 0a800 0 0 3 40000 31 1
+ 0a800 0 0 4 40000 32 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 40000 30 1
+ 19000 0 0 2 40000 31 1
+ 19000 0 0 3 40000 32 1
+ 19000 0 0 4 40000 33 1>;
+ interrupt-parent = <40000>;
+ interrupts = <08 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <8000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+
+ i8259@19000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ compatible = "chrp,iic";
+ big-endian;
+ interrupts = <1>;
+ interrupt-parent = <8000>;
+ };
+ };
+
+ pci@9000 {
+ linux,phandle = <9000>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 40000 3b 1
+ a800 0 0 2 40000 3b 1
+ a800 0 0 3 40000 3b 1
+ a800 0 0 4 40000 3b 1>;
+ interrupt-parent = <40000>;
+ interrupts = <09 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <9000 1000>;
+ compatible = "85xx";
+ device_type = "pci";
+ };
+
+ pic@40000 {
+ linux,phandle = <40000>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ built-in;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+};
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 359ab89748e..40a39291861 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -115,6 +115,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
u64 addr;
u32 *addrp;
upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ struct device_node *tsi = of_get_parent(np);
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
@@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np,
/* Add port, irq will be dealt with later. We passed a translated
* IO port value. It will be fixed up later along with the irq
*/
- return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
+ if (tsi && !strcmp(tsi->type, "tsi-bridge"))
+ return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
+ else
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
}
static int __init add_legacy_isa_port(struct device_node *np,
@@ -464,7 +468,7 @@ static int __init serial_dev_init(void)
fixup_port_irq(i, np, port);
if (port->iotype == UPIO_PORT)
fixup_port_pio(i, np, port);
- if (port->iotype == UPIO_MEM)
+ if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
fixup_port_mmio(i, np, port);
}
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 6a7e997c401..11052c212ad 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child)
return p;
}
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
- return (((pin - 1) + slot) % 4) + 1;
-}
-
/* This doesn't need to be called if you don't have any special workaround
* flags to pass
*/
@@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
+#ifdef CONFIG_PCI
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
{
struct device_node *dn, *ppnode;
@@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
}
EXPORT_SYMBOL_GPL(of_irq_map_pci);
-
+#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 774c0a3c501..18e59e43d2b 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void)
/*
* This version of gettimeofday has microsecond resolution.
*/
-static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
+static inline void __do_gettimeofday(struct timeval *tv)
{
unsigned long sec, usec;
u64 tb_ticks, xsec;
@@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
* without a divide (and in fact, without a multiply)
*/
temp_varp = do_gtod.varp;
- tb_ticks = tb_val - temp_varp->tb_orig_stamp;
+
+ /* Sampling the time base must be done after loading
+ * do_gtod.varp in order to avoid racing with update_gtod.
+ */
+ data_barrier(temp_varp);
+ tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
temp_tb_to_xs = temp_varp->tb_to_xs;
temp_stamp_xsec = temp_varp->stamp_xsec;
xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
@@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv)
tv->tv_usec = usec;
return;
}
- __do_gettimeofday(tv, get_tb());
+ __do_gettimeofday(tv);
}
EXPORT_SYMBOL(do_gettimeofday);
@@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs)
int next_dec;
int cpu = smp_processor_id();
unsigned long ticks;
+ u64 tb_next_jiffy;
#ifdef CONFIG_PPC32
if (atomic_read(&ppc_n_lost_interrupts) != 0)
@@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs)
continue;
write_seqlock(&xtime_lock);
- tb_last_jiffy += tb_ticks_per_jiffy;
- tb_last_stamp = per_cpu(last_jiffy, cpu);
- do_timer(regs);
- timer_recalc_offset(tb_last_jiffy);
- timer_check_rtc();
+ tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
+ if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
+ tb_last_jiffy = tb_next_jiffy;
+ tb_last_stamp = per_cpu(last_jiffy, cpu);
+ do_timer(regs);
+ timer_recalc_offset(tb_last_jiffy);
+ timer_check_rtc();
+ }
write_sequnlock(&xtime_lock);
}
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index e4d1713e8ae..9b352bd0a46 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -585,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs)
#define INST_MFSPR_PVR_MASK 0xfc1fffff
#define INST_DCBA 0x7c0005ec
-#define INST_DCBA_MASK 0x7c0007fe
+#define INST_DCBA_MASK 0xfc0007fe
#define INST_MCRXR 0x7c000400
-#define INST_MCRXR_MASK 0x7c0007fe
+#define INST_MCRXR_MASK 0xfc0007fe
#define INST_STRING 0x7c00042a
-#define INST_STRING_MASK 0x7c0007fe
-#define INST_STRING_GEN_MASK 0x7c00067e
+#define INST_STRING_MASK 0xfc0007fe
+#define INST_STRING_GEN_MASK 0xfc00067e
#define INST_LSWI 0x7c0004aa
#define INST_LSWX 0x7c00042a
#define INST_STSWI 0x7c0005aa
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 266b8b2ceac..5615acc2952 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
hpdp->pd = 0;
tlb->need_flush = 1;
pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
- HUGEPTE_TABLE_SIZE-1));
+ PGF_CACHENUM_MASK));
}
#ifdef CONFIG_PPC_64K_PAGES
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 454fc53289a..c3268d9877e 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -14,7 +14,6 @@ config MPC8540_ADS
config MPC85xx_CDS
bool "Freescale MPC85xx CDS"
select DEFAULT_UIMAGE
- select PPC_I8259 if PCI
help
This option enables support for the MPC85xx CDS board
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 06a497676c9..9d2acfbbecc 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -37,79 +37,7 @@ unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
-#else
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
- 0x0, /* External 11: */
-};
-
#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * This is little evil, but works around the fact
- * that revA boards have IDSEL starting at 18
- * and others boards (older) start at 12
- *
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
- };
-
- const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
int
mpc85xx_exclude_device(u_char bus, u_char devfn)
{
@@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
return PCIBIOS_SUCCESSFUL;
}
+void __init
+mpc85xx_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
#endif /* CONFIG_PCI */
void __init mpc85xx_ads_pic_init(void)
{
- struct mpic *mpic1;
- phys_addr_t OpenPIC_PAddr;
-
- /* Determine the Physical Address of the OpenPIC regs */
- OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
-
- mpic1 = mpic_alloc(OpenPIC_PAddr,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
- mpc85xx_ads_openpic_initsenses,
- sizeof(mpc85xx_ads_openpic_initsenses),
- " OpenPIC ");
- BUG_ON(mpic1 == NULL);
- mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
- mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
- mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
- mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
- mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
- mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
- mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
- mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
- /* dummy mappings to get to 48 */
- mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
- mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
- mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
- mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
- /* External ints */
- mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
- mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
- mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
- mpic_init(mpic1);
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if(of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, 0, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, r.start + 0x10200);
+ mpic_assign_isu(mpic, 1, r.start + 0x10280);
+ mpic_assign_isu(mpic, 2, r.start + 0x10300);
+ mpic_assign_isu(mpic, 3, r.start + 0x10380);
+ mpic_assign_isu(mpic, 4, r.start + 0x10400);
+ mpic_assign_isu(mpic, 5, r.start + 0x10480);
+ mpic_assign_isu(mpic, 6, r.start + 0x10500);
+ mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+ /* Unused on this platform (leave room for 8548) */
+ mpic_assign_isu(mpic, 8, r.start + 0x10600);
+ mpic_assign_isu(mpic, 9, r.start + 0x10680);
+ mpic_assign_isu(mpic, 10, r.start + 0x10700);
+ mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+ /* External Interrupts */
+ mpic_assign_isu(mpic, 12, r.start + 0x10000);
+ mpic_assign_isu(mpic, 13, r.start + 0x10080);
+ mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+ mpic_init(mpic);
}
/*
@@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void)
static void __init mpc85xx_ads_setup_arch(void)
{
struct device_node *cpu;
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
@@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void)
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc85xx_map_irq;
+ ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 18e6e11f702..1d357d32a29 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0;
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */
-#else
- 0x0, /* External 0: */
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
-#ifdef CONFIG_PCI
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */
-#else
- 0x0, /* External 11: */
-#endif
-};
-
#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
- if (!hose->index)
- {
- /* Handle PCI1 interrupts */
- char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
-
- /* Note IRQ assignment for slots is based on which slot the elysium is
- * in -- in this setup elysium is in slot #2 (this PIRQA as first
- * interrupt on slot */
- {
- { 0, 1, 2, 3 }, /* 16 - PMC */
- { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
- { 0, 1, 2, 3 }, /* 18 - Slot 1 */
- { 1, 2, 3, 0 }, /* 19 - Slot 2 */
- { 2, 3, 0, 1 }, /* 20 - Slot 3 */
- { 3, 0, 1, 2 }, /* 21 - Slot 4 */
- };
-
- const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
- int i, j;
-
- for (i = 0; i < 6; i++)
- for (j = 0; j < 4; j++)
- pci_irq_table[i][j] =
- ((pci_irq_table[i][j] + 5 -
- cds_pci_slot) & 0x3) + PIRQ0A;
-
- return PCI_IRQ_TABLE_LOOKUP;
- } else {
- /* Handle PCI2 interrupts (if we have one) */
- char pci_irq_table[][4] =
- {
- /*
- * We only have one slot and one interrupt
- * going to PIRQA - PIRQD */
- { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
- };
-
- const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
- return PCI_IRQ_TABLE_LOOKUP;
- }
-}
#define ARCADIA_HOST_BRIDGE_IDSEL 17
#define ARCADIA_2ND_BRIDGE_IDSEL 3
@@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
pci_dev_put(dev);
}
+
+ /* Now map all the PCI irqs */
+ dev = NULL;
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
+
+#ifdef CONFIG_PPC_I8259
+#warning The i8259 PIC support is currently broken
+static void mpc85xx_8259_cascade(unsigned int irq, struct
+ irq_desc *desc, struct pt_regs *regs)
+{
+ unsigned int cascade_irq = i8259_irq(regs);
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+
+ desc->chip->eoi(irq);
}
+#endif /* PPC_I8259 */
#endif /* CONFIG_PCI */
void __init mpc85xx_cds_pic_init(void)
{
- struct mpic *mpic1;
- phys_addr_t OpenPIC_PAddr;
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+ struct device_node *cascade_node = NULL;
+ int cascade_irq;
- /* Determine the Physical Address of the OpenPIC regs */
- OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
- mpic1 = mpic_alloc(OpenPIC_PAddr,
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
- mpc85xx_cds_openpic_initsenses,
- sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC ");
- BUG_ON(mpic1 == NULL);
- mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
- mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
- mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
- mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
- mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
- mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
- mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
- mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
- /* dummy mappings to get to 48 */
- mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
- mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
- mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
- mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
- /* External ints */
- mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
- mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
- mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
-
- mpic_init(mpic1);
+ 4, 0, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+
+ /* Return the mpic node */
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, r.start + 0x10200);
+ mpic_assign_isu(mpic, 1, r.start + 0x10280);
+ mpic_assign_isu(mpic, 2, r.start + 0x10300);
+ mpic_assign_isu(mpic, 3, r.start + 0x10380);
+ mpic_assign_isu(mpic, 4, r.start + 0x10400);
+ mpic_assign_isu(mpic, 5, r.start + 0x10480);
+ mpic_assign_isu(mpic, 6, r.start + 0x10500);
+ mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+ /* Used only for 8548 so far, but no harm in
+ * allocating them for everyone */
+ mpic_assign_isu(mpic, 8, r.start + 0x10600);
+ mpic_assign_isu(mpic, 9, r.start + 0x10680);
+ mpic_assign_isu(mpic, 10, r.start + 0x10700);
+ mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+ /* External Interrupts */
+ mpic_assign_isu(mpic, 12, r.start + 0x10000);
+ mpic_assign_isu(mpic, 13, r.start + 0x10080);
+ mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+ /* Initialize the i8259 controller */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_DEBUG "Could not find i8259 PIC\n");
+ return;
+ }
-#ifdef CONFIG_PCI
- mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL);
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+ if (cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "Failed to map cascade interrupt\n");
+ return;
+ }
- i8259_init(0,0);
-#endif
+ i8259_init(cascade_node, 0);
+ of_node_put(cascade_node);
+
+ set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
+#endif /* CONFIG_PPC_I8259 */
}
@@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void)
add_bridge(np);
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc85xx_map_irq;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
index 5d2bcf78cef..41e554c4af9 100644
--- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
+++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
@@ -16,38 +16,6 @@
#include <linux/init.h>
-/* PCI interrupt controller */
-#define PIRQA 3
-#define PIRQB 4
-#define PIRQC 5
-#define PIRQD 6
-#define PIRQ7 7
-#define PIRQE 9
-#define PIRQF 10
-#define PIRQG 11
-#define PIRQH 12
-
-/* PCI-Express memory map */
-#define MPC86XX_PCIE_LOWER_IO 0x00000000
-#define MPC86XX_PCIE_UPPER_IO 0x00ffffff
-
-#define MPC86XX_PCIE_LOWER_MEM 0x80000000
-#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff
-
-#define MPC86XX_PCIE_IO_BASE 0xe2000000
-#define MPC86XX_PCIE_MEM_OFFSET 0x00000000
-
-#define MPC86XX_PCIE_IO_SIZE 0x01000000
-
-#define PCIE1_CFG_ADDR_OFFSET (0x8000)
-#define PCIE1_CFG_DATA_OFFSET (0x8004)
-
-#define PCIE2_CFG_ADDR_OFFSET (0x9000)
-#define PCIE2_CFG_DATA_OFFSET (0x9004)
-
-#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET
-#define MPC86xx_PCIE_SIZE (0x1000)
-
#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
#endif /* __MPC8641_HPCN_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index ebae73eb006..146da3001c6 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -37,6 +37,14 @@
#include "mpc86xx.h"
#include "mpc8641_hpcn.h"
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
@@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0;
#endif
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- */
-
-static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = {
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */
- 0x0, /* External 0: */
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
- 0x0, /* External 5: */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */
- 0x0, /* External 11: */
- 0x0,
- 0x0,
- 0x0,
- 0x0,
-};
-
+static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
+{
+ unsigned int cascade_irq = i8259_irq(regs);
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
+}
void __init
mpc86xx_hpcn_init_irq(void)
{
struct mpic *mpic1;
+ struct device_node *np, *cascade_node = NULL;
+ int cascade_irq;
phys_addr_t openpic_paddr;
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np == NULL)
+ return;
+
/* Determine the Physical Address of the OpenPIC regs */
openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
/* Alloc mpic structure and per isu has 16 INT entries. */
- mpic1 = mpic_alloc(openpic_paddr,
+ mpic1 = mpic_alloc(np, openpic_paddr,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250,
- mpc86xx_hpcn_openpic_initsenses,
- sizeof(mpc86xx_hpcn_openpic_initsenses),
+ 16, NR_IRQS - 4,
" MPIC ");
BUG_ON(mpic1 == NULL);
+ mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
+
/* 48 Internal Interrupts */
- mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200);
- mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400);
- mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600);
+ mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
+ mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
+ mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
- /* 16 External interrupts */
- mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000);
+ /* 16 External interrupts
+ * Moving them from [0 - 15] to [64 - 79]
+ */
+ mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
mpic_init(mpic1);
#ifdef CONFIG_PCI
- mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL);
- i8259_init(0, I8259_OFFSET);
-#endif
-}
+ /* Initialize i8259 controller */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ cascade_node = np;
+ break;
+ }
+ if (cascade_node == NULL) {
+ printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
+ return;
+ }
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+ if (cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
+ return;
+ }
+ DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
+ i8259_init(cascade_node, 0);
+ set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
+#endif
+}
#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
+const unsigned char uli1575_irq_route_table[16] = {
+ 0, /* 0: Reserved */
+ 0x8, /* 1: 0b1000 */
+ 0, /* 2: Reserved */
+ 0x2, /* 3: 0b0010 */
+ 0x4, /* 4: 0b0100 */
+ 0x5, /* 5: 0b0101 */
+ 0x7, /* 6: 0b0111 */
+ 0x6, /* 7: 0b0110 */
+ 0, /* 8: Reserved */
+ 0x1, /* 9: 0b0001 */
+ 0x3, /* 10: 0b0011 */
+ 0x9, /* 11: 0b1001 */
+ 0xb, /* 12: 0b1011 */
+ 0, /* 13: Reserved */
+ 0xd, /* 14, 0b1101 */
+ 0xf, /* 15, 0b1111 */
+};
+
+static int __devinit
+get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
{
- static char pci_irq_table[][4] = {
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */
- {0, 0, 0, 0}, /* IDSEL 19 */
- {0, 0, 0, 0}, /* IDSEL 20 */
- {0, 0, 0, 0}, /* IDSEL 21 */
- {0, 0, 0, 0}, /* IDSEL 22 */
- {0, 0, 0, 0}, /* IDSEL 23 */
- {0, 0, 0, 0}, /* IDSEL 24 */
- {0, 0, 0, 0}, /* IDSEL 25 */
- {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/
- {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */
- {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */
- {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */
- {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/
- {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */
- };
-
- const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
+ struct of_irq oirq;
+ u32 laddr[3];
+ struct device_node *hosenode = hose ? hose->arch_data : NULL;
+
+ if (!hosenode) return -EINVAL;
+
+ laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
+ laddr[1] = laddr[2] = 0;
+ of_irq_map_raw(hosenode, &pin, laddr, &oirq);
+ DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
+ laddr[0], slot, pin, oirq.specifier[0]);
+ return oirq.specifier[0];
}
-static void __devinit quirk_ali1575(struct pci_dev *dev)
+static void __devinit quirk_uli1575(struct pci_dev *dev)
{
unsigned short temp;
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ unsigned char irq2pin[16];
+ unsigned long pirq_map_word = 0;
+ u32 irq;
+ int i;
/*
- * ALI1575 interrupts route table setup:
+ * ULI1575 interrupts route setup
+ */
+ memset(irq2pin, 0, 16); /* Initialize default value 0 */
+
+ /*
+ * PIRQA -> PIRQD mapping read from OF-tree
+ *
+ * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+ * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+ */
+ for (i = 0; i < 4; i++){
+ irq = get_pci_irq_from_of(hose, 17, i + 1);
+ if (irq > 0 && irq < 16)
+ irq2pin[irq] = PIRQA + i;
+ else
+ printk(KERN_WARNING "ULI1575 device"
+ "(slot %d, pin %d) irq %d is invalid.\n",
+ 17, i, irq);
+ }
+
+ /*
+ * PIRQE -> PIRQF mapping set manually
*
* IRQ pin IRQ#
- * PIRQA ---- 3
- * PIRQB ---- 4
- * PIRQC ---- 5
- * PIRQD ---- 6
* PIRQE ---- 9
* PIRQF ---- 10
* PIRQG ---- 11
* PIRQH ---- 12
- *
- * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
- * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
*/
- pci_write_config_dword(dev, 0x48, 0xb9317542);
+ for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
+
+ /* Set IRQ-PIRQ Mapping to ULI1575 */
+ for (i = 0; i < 16; i++)
+ if (irq2pin[i])
+ pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
+ << ((irq2pin[i] - PIRQA) * 4);
- /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
- pci_write_config_byte(dev, 0x86, 0x0c);
+ /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
+ DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
+ pirq_map_word);
+ pci_write_config_dword(dev, 0x48, pirq_map_word);
- /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
- pci_write_config_byte(dev, 0x87, 0x0d);
+#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
+ do { \
+ int irq; \
+ irq = get_pci_irq_from_of(hose, slot, pin); \
+ if (irq > 0 && irq < 16) \
+ pci_write_config_byte(dev, reg, irq2pin[irq]); \
+ else \
+ printk(KERN_WARNING "ULI1575 device" \
+ "(slot %d, pin %d) irq %d is invalid.\n", \
+ slot, pin, irq); \
+ } while(0)
- /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
- pci_write_config_byte(dev, 0x88, 0x0f);
+ /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
+ ULI1575_SET_DEV_IRQ(28, 1, 0x86);
- /* USB 2.0 controller, interrupt: PIRQ7 */
- pci_write_config_byte(dev, 0x74, 0x06);
+ /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
+ ULI1575_SET_DEV_IRQ(28, 2, 0x87);
- /* Audio controller, interrupt: PIRQE */
- pci_write_config_byte(dev, 0x8a, 0x0c);
+ /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
+ ULI1575_SET_DEV_IRQ(28, 3, 0x88);
- /* Modem controller, interrupt: PIRQF */
- pci_write_config_byte(dev, 0x8b, 0x0d);
+ /* USB 2.0 controller, slot 28, pin 4 */
+ irq = get_pci_irq_from_of(hose, 28, 4);
+ if (irq >= 0 && irq <=15)
+ pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
- /* HD audio controller, interrupt: PIRQG */
- pci_write_config_byte(dev, 0x8c, 0x0e);
+ /* Audio controller, slot 29, pin 1 */
+ ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
- /* Serial ATA interrupt: PIRQD */
- pci_write_config_byte(dev, 0x8d, 0x0b);
+ /* Modem controller, slot 29, pin 2 */
+ ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
- /* SMB interrupt: PIRQH */
- pci_write_config_byte(dev, 0x8e, 0x0f);
+ /* HD audio controller, slot 29, pin 3 */
+ ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
- /* PMU ACPI SCI interrupt: PIRQH */
- pci_write_config_byte(dev, 0x8f, 0x0f);
+ /* SMB interrupt: slot 30, pin 1 */
+ ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
+
+ /* PMU ACPI SCI interrupt: slot 30, pin 2 */
+ ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
+
+ /* Serial ATA interrupt: slot 31, pin 1 */
+ ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
/* Primary PATA IDE IRQ: 14
* Secondary PATA IDE IRQ: 15
*/
- pci_write_config_byte(dev, 0x44, 0x3d);
- pci_write_config_byte(dev, 0x75, 0x0f);
+ pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
+ pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
/* Set IRQ14 and IRQ15 to legacy IRQs */
pci_read_config_word(dev, 0x46, &temp);
@@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev)
*/
outb(0xfa, 0x4d0);
outb(0x1e, 0x4d1);
+
+#undef ULI1575_SET_DEV_IRQ
}
static void __devinit quirk_uli5288(struct pci_dev *dev)
@@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev)
dev->class |= 0x1;
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
@@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void)
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc86xx_map_irq;
ppc_md.pci_exclude_device = mpc86xx_exclude_device;
#endif
@@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
}
+void __init mpc86xx_hpcn_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
+
+
/*
* Called very early, device-tree isn't unflattened
*/
@@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) {
.setup_arch = mpc86xx_hpcn_setup_arch,
.init_IRQ = mpc86xx_hpcn_init_irq,
.show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
+ .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup,
.get_irq = mpic_get_irq,
.restart = mpc86xx_restart,
.time_init = mpc86xx_time_init,
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d7a4fc7ca23..ed00ed2455d 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -1,7 +1,7 @@
/*
* mpc7448_hpc2.c
*
- * Board setup routines for the Freescale Taiga platform
+ * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
*
* Author: Jacob Pan
* jacob.pan@freescale.com
@@ -12,10 +12,10 @@
*
* Copyright 2004-2006 Freescale Semiconductor, Inc.
*
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
@@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
extern void tsi108_pci_int_init(void);
-extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
-
-/*
- * Define all of the IRQ senses and polarities. Taken from the
- * mpc7448hpc manual.
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-
-static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
- /* External on-board sources */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
- /* Internal Tsi108/109 interrupt sources */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
-};
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
@@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
phys_addr_t mpic_paddr = 0;
+ unsigned int cascade_pci_irq;
+ struct device_node *tsi_pci;
struct device_node *tsi_pic;
tsi_pic = of_find_node_by_type(NULL, "open-pic");
@@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void)
DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
(u32) mpic_paddr);
- mpic = mpic_alloc(mpic_paddr,
+ mpic = mpic_alloc(tsi_pic, mpic_paddr,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
0, /* num_sources used */
- TSI108_IRQ_BASE,
0, /* num_sources used */
- NR_IRQS - 4 /* XXXX */,
- mpc7448_hpc2_pic_initsenses,
- sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+ "Tsi108_PIC");
BUG_ON(mpic == NULL); /* XXXX */
-
mpic_init(mpic);
- mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+
+ tsi_pci = of_find_node_by_type(NULL, "pci");
+ if (tsi_pci == 0) {
+ printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+ return;
+ }
+
+ cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+ set_irq_data(cascade_pci_irq, mpic);
+ set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
tsi108_pci_int_init();
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+ of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
@@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
return 0;
}
+
define_machine(mpc7448_hpc2){
.name = "MPC7448 HPC2",
.probe = mpc7448_hpc2_probe,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 6a026c733f6..9d73d0234c5 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start)
DBG("End of boot params: %x\n", mem_end);
rsvmap[0] = mem_start;
rsvmap[1] = mem_end;
- rsvmap[2] = 0;
- rsvmap[3] = 0;
+ if (bootx_info->ramDisk) {
+ rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk;
+ rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize;
+ rsvmap[4] = 0;
+ rsvmap[5] = 0;
+ } else {
+ rsvmap[2] = 0;
+ rsvmap[3] = 0;
+ }
return (unsigned long)hdr;
}
@@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
*/
if (bi->version < 5) {
space = bi->deviceTreeOffset + bi->deviceTreeSize;
- if (bi->ramDisk)
+ if (bi->ramDisk >= space)
space = bi->ramDisk + bi->ramDiskSize;
} else
space = bi->totalParamsSize;
- bootx_printf("Total space used by parameters & ramdisk: %x \n", space);
+ bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
/* New BootX will have flushed all TLBs and enters kernel with
* MMU switched OFF, so this should not be useful anymore.
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 12b65609c07..ef10bcf2d94 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void)
mdio_data.irq[k] = -1;
while ((child = of_get_next_child(np, child)) != NULL) {
- if (child->n_intrs) {
- u32 *id =
- (u32 *) get_property(child, "reg", NULL);
- mdio_data.irq[*id] = child->intrs[0].line;
- }
+ u32 *id = get_property(child, "reg", NULL);
+ mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
}
ret =
@@ -131,6 +128,7 @@ static int __init gfar_of_init(void)
char *model;
void *mac_addr;
phandle *ph;
+ int n_res = 1;
memset(r, 0, sizeof(r));
memset(&gfar_data, 0, sizeof(gfar_data));
@@ -139,8 +137,7 @@ static int __init gfar_of_init(void)
if (ret)
goto err;
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
model = get_property(np, "model", NULL);
@@ -150,19 +147,19 @@ static int __init gfar_of_init(void)
r[1].name = gfar_tx_intr;
r[2].name = gfar_rx_intr;
- r[2].start = np->intrs[1].line;
- r[2].end = np->intrs[1].line;
+ r[2].start = r[2].end = irq_of_parse_and_map(np, 1);
r[2].flags = IORESOURCE_IRQ;
r[3].name = gfar_err_intr;
- r[3].start = np->intrs[2].line;
- r[3].end = np->intrs[2].line;
+ r[3].start = r[3].end = irq_of_parse_and_map(np, 2);
r[3].flags = IORESOURCE_IRQ;
+
+ n_res += 2;
}
gfar_dev =
platform_device_register_simple("fsl-gianfar", i, &r[0],
- np->n_intrs + 1);
+ n_res + 1);
if (IS_ERR(gfar_dev)) {
ret = PTR_ERR(gfar_dev);
@@ -259,8 +256,7 @@ static int __init fsl_i2c_of_init(void)
if (ret)
goto err;
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
@@ -396,8 +392,7 @@ static int __init fsl_usb_of_init(void)
if (ret)
goto err;
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
usb_dev_mph =
@@ -445,8 +440,7 @@ static int __init fsl_usb_of_init(void)
if (ret)
goto unreg_mph;
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
usb_dev_dr =
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 26a0cc820cd..f3038461d4c 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void)
goto err;
r[1].name = "tx";
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = irq_of_parse_and_map(np, 0);
+ r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
+ DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+ __FUNCTION__,r[1].name, r[1].start, r[1].end);
tsi_eth_dev =
platform_device_register_simple("tsi-ethernet", i, &r[0],
- np->n_intrs + 1);
+ 1);
if (IS_ERR(tsi_eth_dev)) {
ret = PTR_ERR(tsi_eth_dev);
@@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void)
tsi_eth_data.regs = r[0].start;
tsi_eth_data.phyregs = res.start;
tsi_eth_data.phy = *phy_id;
- tsi_eth_data.irq_num = np->intrs[0].line;
+ tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
of_node_put(phy);
ret =
platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 3265d54c82e..2ab06ed3ae7 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -26,7 +26,6 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
(hose)->ops = &tsi108_direct_pci_ops;
- printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+ printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
"Firmware bus number: %d->%d\n",
rsrc.start, hose->first_busno, hose->last_busno);
@@ -278,7 +277,7 @@ static void init_pci_source(void)
mb();
}
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
{
u_int temp = 0;
int irq = -1;
@@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq)
* Interrupt controller descriptor for cascaded PCI interrupt controller.
*/
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
.typename = "tsi108_PCI_int",
- .enable = tsi108_pci_irq_enable,
- .disable = tsi108_pci_irq_disable,
+ .mask = tsi108_pci_irq_disable,
.ack = tsi108_pci_irq_ack,
.end = tsi108_pci_irq_end,
+ .unmask = tsi108_pci_irq_enable,
};
/*
@@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void)
DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
for (i = 0; i < NUM_PCI_IRQS; i++) {
- irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+ irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
}
init_pci_source();
}
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
{
- return get_pci_source();
+ unsigned int cascade_irq = get_pci_source();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
}
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 35488d6c745..0251cab4708 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -348,9 +348,9 @@ void __init setup_arch(char **cmdline_p)
init_mm.context = (unsigned long) NO_CONTEXT;
init_task.thread.kregs = &fake_swapper_regs;
- smp_setup_cpu_possible_map();
-
paging_init();
+
+ smp_setup_cpu_possible_map();
}
static int __init set_preferred_console(void)
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index e311ade1b49..276f22881d0 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -34,7 +34,6 @@
#include <asm/tlbflush.h>
#include <asm/cpudata.h>
-volatile int smp_processors_ready = 0;
int smp_num_cpus = 1;
volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
unsigned char boot_cpu_id = 0;
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index ba843f6a283..3ff4edd3281 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -42,7 +42,7 @@ extern ctxd_t *srmmu_ctx_table_phys;
extern void calibrate_delay(void);
-extern volatile int smp_processors_ready;
+static volatile int smp_processors_ready = 0;
static int smp_highest_cpu;
extern volatile unsigned long cpu_callin_map[NR_CPUS];
extern cpuinfo_sparc cpu_data[NR_CPUS];
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 3b32096134a..7d4a649138f 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -39,7 +39,6 @@ extern ctxd_t *srmmu_ctx_table_phys;
extern void calibrate_delay(void);
-extern volatile int smp_processors_ready;
extern volatile unsigned long cpu_callin_map[NR_CPUS];
extern unsigned char boot_cpu_id;
@@ -217,7 +216,6 @@ void __init smp4m_smp_done(void)
}
/* Ok, they are spinning and ready to go. */
- smp_processors_ready = 1;
}
/* At each hardware IRQ, we get this called to forward IRQ reception
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index aae3123bf3e..3a3aee08ec5 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1561,7 +1561,7 @@ restart:
/* ->key must be copied to avoid race with cfq_exit_queue() */
k = __cic->key;
if (unlikely(!k)) {
- cfq_drop_dead_cic(ioc, cic);
+ cfq_drop_dead_cic(ioc, __cic);
goto restart;
}
diff --git a/block/elevator.c b/block/elevator.c
index bc7baeec0d1..9b72dc7c8a5 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -765,7 +765,8 @@ void elv_unregister(struct elevator_type *e)
read_lock(&tasklist_lock);
do_each_thread(g, p) {
task_lock(p);
- e->ops.trim(p->io_context);
+ if (p->io_context)
+ e->ops.trim(p->io_context);
task_unlock(p);
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 61d6b3c65b6..ddd9253f9d5 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3628,6 +3628,8 @@ struct io_context *current_io_context(gfp_t gfp_flags)
ret->nr_batch_requests = 0; /* because this is 0 */
ret->aic = NULL;
ret->cic_root.rb_node = NULL;
+ /* make sure set_task_ioprio() sees the settings above */
+ smp_wmb();
tsk->io_context = ret;
}
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 96309b9660d..11abc7bf777 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -285,6 +285,8 @@ static int __init acpi_ac_init(void)
{
int result;
+ if (acpi_disabled)
+ return -ENODEV;
acpi_ac_dir = acpi_lock_ac_dir();
if (!acpi_ac_dir)
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index b0d4b147b19..1dda370f402 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -484,10 +484,8 @@ acpi_memory_register_notify_handler(acpi_handle handle,
status = is_memory_device(handle);
- if (ACPI_FAILURE(status)){
- ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device"));
+ if (ACPI_FAILURE(status))
return AE_OK; /* continue */
- }
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
acpi_memory_device_notify, NULL);
@@ -503,10 +501,8 @@ acpi_memory_deregister_notify_handler(acpi_handle handle,
status = is_memory_device(handle);
- if (ACPI_FAILURE(status)){
- ACPI_EXCEPTION((AE_INFO, status, "handle is no memory device"));
+ if (ACPI_FAILURE(status))
return AE_OK; /* continue */
- }
status = acpi_remove_notify_handler(handle,
ACPI_SYSTEM_NOTIFY,
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 6e5221707d9..9810e2a55d0 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -757,6 +757,9 @@ static int __init acpi_battery_init(void)
{
int result;
+ if (acpi_disabled)
+ return -ENODEV;
+
acpi_battery_dir = acpi_lock_battery_dir();
if (!acpi_battery_dir)
return -ENODEV;
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index b2977695e12..279c4bac92e 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/pm.h>
@@ -68,7 +69,8 @@ int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device)
status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device);
if (ACPI_FAILURE(status) || !*device) {
- ACPI_EXCEPTION((AE_INFO, status, "No context for object [%p]", handle));
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
+ handle));
return -ENODEV;
}
@@ -192,7 +194,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
/* Make sure this is a valid target state */
if (!device->flags.power_manageable) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable",
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n",
device->kobj.name));
return -ENODEV;
}
@@ -738,7 +740,10 @@ static int __init acpi_init(void)
return -ENODEV;
}
- firmware_register(&acpi_subsys);
+ result = firmware_register(&acpi_subsys);
+ if (result < 0)
+ printk(KERN_WARNING "%s: firmware_register error: %d\n",
+ __FUNCTION__, result);
result = acpi_bus_init();
diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c
index 32c9d88fd19..1ba2db67186 100644
--- a/drivers/acpi/hotkey.c
+++ b/drivers/acpi/hotkey.c
@@ -91,6 +91,14 @@ enum {
HK_EVENT_ENTERRING_S5,
};
+enum conf_entry_enum {
+ bus_handle = 0,
+ bus_method = 1,
+ action_handle = 2,
+ method = 3,
+ LAST_CONF_ENTRY
+};
+
/* procdir we use */
static struct proc_dir_entry *hotkey_proc_dir;
static struct proc_dir_entry *hotkey_config;
@@ -244,19 +252,15 @@ static int hotkey_info_open_fs(struct inode *inode, struct file *file)
static char *format_result(union acpi_object *object)
{
- char *buf = NULL;
-
- buf = (char *)kmalloc(RESULT_STR_LEN, GFP_KERNEL);
- if (buf)
- memset(buf, 0, RESULT_STR_LEN);
- else
- goto do_fail;
+ char *buf;
+ buf = kzalloc(RESULT_STR_LEN, GFP_KERNEL);
+ if (!buf)
+ return NULL;
/* Now, just support integer type */
if (object->type == ACPI_TYPE_INTEGER)
sprintf(buf, "%d\n", (u32) object->integer.value);
- do_fail:
- return (buf);
+ return buf;
}
static int hotkey_polling_seq_show(struct seq_file *seq, void *offset)
@@ -486,98 +490,102 @@ static void free_hotkey_device(union acpi_hotkey *key)
static void free_hotkey_buffer(union acpi_hotkey *key)
{
+ /* key would never be null, action method could be */
kfree(key->event_hotkey.action_method);
}
static void free_poll_hotkey_buffer(union acpi_hotkey *key)
{
+ /* key would never be null, others could be*/
kfree(key->poll_hotkey.action_method);
kfree(key->poll_hotkey.poll_method);
kfree(key->poll_hotkey.poll_result);
}
static int
-init_hotkey_device(union acpi_hotkey *key, char *bus_str, char *action_str,
- char *method, int std_num, int external_num)
+init_hotkey_device(union acpi_hotkey *key, char **config_entry,
+ int std_num, int external_num)
{
acpi_handle tmp_handle;
acpi_status status = AE_OK;
-
if (std_num < 0 || IS_POLL(std_num) || !key)
goto do_fail;
- if (!bus_str || !action_str || !method)
+ if (!config_entry[bus_handle] || !config_entry[action_handle]
+ || !config_entry[method])
goto do_fail;
key->link.hotkey_type = ACPI_HOTKEY_EVENT;
key->link.hotkey_standard_num = std_num;
key->event_hotkey.flag = 0;
- key->event_hotkey.action_method = method;
+ key->event_hotkey.action_method = config_entry[method];
- status =
- acpi_get_handle(NULL, bus_str, &(key->event_hotkey.bus_handle));
+ status = acpi_get_handle(NULL, config_entry[bus_handle],
+ &(key->event_hotkey.bus_handle));
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
key->event_hotkey.external_hotkey_num = external_num;
- status =
- acpi_get_handle(NULL, action_str,
+ status = acpi_get_handle(NULL, config_entry[action_handle],
&(key->event_hotkey.action_handle));
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
status = acpi_get_handle(key->event_hotkey.action_handle,
- method, &tmp_handle);
+ config_entry[method], &tmp_handle);
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
return AE_OK;
- do_fail:
+do_fail_zero:
+ key->event_hotkey.action_method = NULL;
+do_fail:
return -ENODEV;
}
static int
-init_poll_hotkey_device(union acpi_hotkey *key,
- char *poll_str,
- char *poll_method,
- char *action_str, char *action_method, int std_num)
+init_poll_hotkey_device(union acpi_hotkey *key, char **config_entry,
+ int std_num)
{
acpi_status status = AE_OK;
acpi_handle tmp_handle;
-
if (std_num < 0 || IS_EVENT(std_num) || !key)
goto do_fail;
-
- if (!poll_str || !poll_method || !action_str || !action_method)
+ if (!config_entry[bus_handle] ||!config_entry[bus_method] ||
+ !config_entry[action_handle] || !config_entry[method])
goto do_fail;
key->link.hotkey_type = ACPI_HOTKEY_POLLING;
key->link.hotkey_standard_num = std_num;
key->poll_hotkey.flag = 0;
- key->poll_hotkey.poll_method = poll_method;
- key->poll_hotkey.action_method = action_method;
+ key->poll_hotkey.poll_method = config_entry[bus_method];
+ key->poll_hotkey.action_method = config_entry[method];
- status =
- acpi_get_handle(NULL, poll_str, &(key->poll_hotkey.poll_handle));
+ status = acpi_get_handle(NULL, config_entry[bus_handle],
+ &(key->poll_hotkey.poll_handle));
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
status = acpi_get_handle(key->poll_hotkey.poll_handle,
- poll_method, &tmp_handle);
+ config_entry[bus_method], &tmp_handle);
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
status =
- acpi_get_handle(NULL, action_str,
+ acpi_get_handle(NULL, config_entry[action_handle],
&(key->poll_hotkey.action_handle));
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
status = acpi_get_handle(key->poll_hotkey.action_handle,
- action_method, &tmp_handle);
+ config_entry[method], &tmp_handle);
if (ACPI_FAILURE(status))
- goto do_fail;
+ goto do_fail_zero;
key->poll_hotkey.poll_result =
(union acpi_object *)kmalloc(sizeof(union acpi_object), GFP_KERNEL);
if (!key->poll_hotkey.poll_result)
- goto do_fail;
+ goto do_fail_zero;
return AE_OK;
- do_fail:
+
+do_fail_zero:
+ key->poll_hotkey.poll_method = NULL;
+ key->poll_hotkey.action_method = NULL;
+do_fail:
return -ENODEV;
}
@@ -652,17 +660,18 @@ static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset)
}
static int
-get_parms(char *config_record,
- int *cmd,
- char **bus_handle,
- char **bus_method,
- char **action_handle,
- char **method, int *internal_event_num, int *external_event_num)
+get_parms(char *config_record, int *cmd, char **config_entry,
+ int *internal_event_num, int *external_event_num)
{
+/* the format of *config_record =
+ * "1:\d+:*" : "cmd:internal_event_num"
+ * "\d+:\w+:\w+:\w+:\w+:\d+:\d+" :
+ * "cmd:bus_handle:bus_method:action_handle:method:internal_event_num:external_event_num"
+ */
char *tmp, *tmp1, count;
+ int i;
sscanf(config_record, "%d", cmd);
-
if (*cmd == 1) {
if (sscanf(config_record, "%d:%d", cmd, internal_event_num) !=
2)
@@ -674,59 +683,27 @@ get_parms(char *config_record,
if (!tmp)
goto do_fail;
tmp++;
- tmp1 = strchr(tmp, ':');
- if (!tmp1)
- goto do_fail;
-
- count = tmp1 - tmp;
- *bus_handle = (char *)kmalloc(count + 1, GFP_KERNEL);
- if (!*bus_handle)
- goto do_fail;
- strncpy(*bus_handle, tmp, count);
- *(*bus_handle + count) = 0;
-
- tmp = tmp1;
- tmp++;
- tmp1 = strchr(tmp, ':');
- if (!tmp1)
- goto do_fail;
- count = tmp1 - tmp;
- *bus_method = (char *)kmalloc(count + 1, GFP_KERNEL);
- if (!*bus_method)
- goto do_fail;
- strncpy(*bus_method, tmp, count);
- *(*bus_method + count) = 0;
-
- tmp = tmp1;
- tmp++;
- tmp1 = strchr(tmp, ':');
- if (!tmp1)
- goto do_fail;
- count = tmp1 - tmp;
- *action_handle = (char *)kmalloc(count + 1, GFP_KERNEL);
- if (!*action_handle)
- goto do_fail;
- strncpy(*action_handle, tmp, count);
- *(*action_handle + count) = 0;
-
- tmp = tmp1;
- tmp++;
- tmp1 = strchr(tmp, ':');
- if (!tmp1)
- goto do_fail;
- count = tmp1 - tmp;
- *method = (char *)kmalloc(count + 1, GFP_KERNEL);
- if (!*method)
- goto do_fail;
- strncpy(*method, tmp, count);
- *(*method + count) = 0;
-
- if (sscanf(tmp1 + 1, "%d:%d", internal_event_num, external_event_num) <=
- 0)
- goto do_fail;
-
- return 6;
- do_fail:
+ for (i = 0; i < LAST_CONF_ENTRY; i++) {
+ tmp1 = strchr(tmp, ':');
+ if (!tmp1) {
+ goto do_fail;
+ }
+ count = tmp1 - tmp;
+ config_entry[i] = kzalloc(count + 1, GFP_KERNEL);
+ if (!config_entry[i])
+ goto handle_failure;
+ strncpy(config_entry[i], tmp, count);
+ tmp = tmp1 + 1;
+ }
+ if (sscanf(tmp, "%d:%d", internal_event_num, external_event_num) <= 0)
+ goto handle_failure;
+ if (!IS_OTHERS(*internal_event_num)) {
+ return 6;
+ }
+handle_failure:
+ while (i-- > 0)
+ kfree(config_entry[i]);
+do_fail:
return -1;
}
@@ -736,50 +713,34 @@ static ssize_t hotkey_write_config(struct file *file,
size_t count, loff_t * data)
{
char *config_record = NULL;
- char *bus_handle = NULL;
- char *bus_method = NULL;
- char *action_handle = NULL;
- char *method = NULL;
+ char *config_entry[LAST_CONF_ENTRY];
int cmd, internal_event_num, external_event_num;
int ret = 0;
- union acpi_hotkey *key = NULL;
+ union acpi_hotkey *key = kzalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
+ if (!key)
+ return -ENOMEM;
- config_record = (char *)kmalloc(count + 1, GFP_KERNEL);
- if (!config_record)
+ config_record = kzalloc(count + 1, GFP_KERNEL);
+ if (!config_record) {
+ kfree(key);
return -ENOMEM;
+ }
if (copy_from_user(config_record, buffer, count)) {
kfree(config_record);
+ kfree(key);
printk(KERN_ERR PREFIX "Invalid data\n");
return -EINVAL;
}
- config_record[count] = 0;
-
- ret = get_parms(config_record,
- &cmd,
- &bus_handle,
- &bus_method,
- &action_handle,
- &method, &internal_event_num, &external_event_num);
-
+ ret = get_parms(config_record, &cmd, config_entry,
+ &internal_event_num, &external_event_num);
kfree(config_record);
- if (IS_OTHERS(internal_event_num))
- goto do_fail;
if (ret != 6) {
- do_fail:
- kfree(bus_handle);
- kfree(bus_method);
- kfree(action_handle);
- kfree(method);
printk(KERN_ERR PREFIX "Invalid data format ret=%d\n", ret);
return -EINVAL;
}
- key = kmalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
- if (!key)
- goto do_fail;
- memset(key, 0, sizeof(union acpi_hotkey));
if (cmd == 1) {
union acpi_hotkey *tmp = NULL;
tmp = get_hotkey_by_event(&global_hotkey_list,
@@ -791,34 +752,19 @@ static ssize_t hotkey_write_config(struct file *file,
goto cont_cmd;
}
if (IS_EVENT(internal_event_num)) {
- kfree(bus_method);
- ret = init_hotkey_device(key, bus_handle, action_handle, method,
- internal_event_num,
- external_event_num);
- } else
- ret = init_poll_hotkey_device(key, bus_handle, bus_method,
- action_handle, method,
- internal_event_num);
- if (ret) {
- kfree(bus_handle);
- kfree(action_handle);
- if (IS_EVENT(internal_event_num))
- free_hotkey_buffer(key);
- else
- free_poll_hotkey_buffer(key);
- kfree(key);
- printk(KERN_ERR PREFIX "Invalid hotkey\n");
- return -EINVAL;
+ if (init_hotkey_device(key, config_entry,
+ internal_event_num, external_event_num))
+ goto init_hotkey_fail;
+ } else {
+ if (init_poll_hotkey_device(key, config_entry,
+ internal_event_num))
+ goto init_poll_hotkey_fail;
}
-
- cont_cmd:
- kfree(bus_handle);
- kfree(action_handle);
-
+cont_cmd:
switch (cmd) {
case 0:
- if (get_hotkey_by_event
- (&global_hotkey_list, key->link.hotkey_standard_num))
+ if (get_hotkey_by_event(&global_hotkey_list,
+ key->link.hotkey_standard_num))
goto fail_out;
else
hotkey_add(key);
@@ -827,6 +773,7 @@ static ssize_t hotkey_write_config(struct file *file,
hotkey_remove(key);
break;
case 2:
+ /* key is kfree()ed if matched*/
if (hotkey_update(key))
goto fail_out;
break;
@@ -835,11 +782,22 @@ static ssize_t hotkey_write_config(struct file *file,
break;
}
return count;
- fail_out:
- if (IS_EVENT(internal_event_num))
- free_hotkey_buffer(key);
- else
- free_poll_hotkey_buffer(key);
+
+init_poll_hotkey_fail: /* failed init_poll_hotkey_device */
+ kfree(config_entry[bus_method]);
+ config_entry[bus_method] = NULL;
+init_hotkey_fail: /* failed init_hotkey_device */
+ kfree(config_entry[method]);
+fail_out:
+ kfree(config_entry[bus_handle]);
+ kfree(config_entry[action_handle]);
+ /* No double free since elements =NULL for error cases */
+ if (IS_EVENT(internal_event_num)) {
+ if (config_entry[bus_method])
+ kfree(config_entry[bus_method]);
+ free_hotkey_buffer(key); /* frees [method] */
+ } else
+ free_poll_hotkey_buffer(key); /* frees [bus_method]+[method] */
kfree(key);
printk(KERN_ERR PREFIX "invalid key\n");
return -EINVAL;
@@ -923,10 +881,9 @@ static ssize_t hotkey_execute_aml_method(struct file *file,
union acpi_hotkey *key;
- arg = (char *)kmalloc(count + 1, GFP_KERNEL);
+ arg = kzalloc(count + 1, GFP_KERNEL);
if (!arg)
return -ENOMEM;
- arg[count] = 0;
if (copy_from_user(arg, buffer, count)) {
kfree(arg);
diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c
index 84239d51dc0..6809c283ec5 100644
--- a/drivers/acpi/i2c_ec.c
+++ b/drivers/acpi/i2c_ec.c
@@ -330,7 +330,7 @@ static int acpi_ec_hc_add(struct acpi_device *device)
status = acpi_evaluate_integer(ec_hc->handle, "_EC", NULL, &val);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Error obtaining _EC\n"));
- kfree(ec_hc->smbus);
+ kfree(ec_hc);
kfree(smbus);
return -EIO;
}
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index b7d1514cd19..507f051d1ce 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -746,6 +746,16 @@ acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout)
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n",
handle, units, timeout));
+ /*
+ * This can be called during resume with interrupts off.
+ * Like boot-time, we should be single threaded and will
+ * always get the lock if we try -- timeout or not.
+ * If this doesn't succeed, then we will oops courtesy of
+ * might_sleep() in down().
+ */
+ if (!down_trylock(sem))
+ return AE_OK;
+
switch (timeout) {
/*
* No Wait:
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index db7b350a503..62bef0b3b61 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -1714,6 +1714,9 @@ static int __init acpi_sbs_init(void)
{
int result = 0;
+ if (acpi_disabled)
+ return -ENODEV;
+
init_MUTEX(&sbs_sem);
if (capacity_mode != DEF_CAPACITY_UNIT
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 5fcb50c7b77..698a1540e30 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -4,6 +4,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/acpi.h>
#include <acpi/acpi_drivers.h>
@@ -113,6 +114,8 @@ static struct kset acpi_namespace_kset = {
static void acpi_device_register(struct acpi_device *device,
struct acpi_device *parent)
{
+ int err;
+
/*
* Linkage
* -------
@@ -138,7 +141,10 @@ static void acpi_device_register(struct acpi_device *device,
device->kobj.parent = &parent->kobj;
device->kobj.ktype = &ktype_acpi_ns;
device->kobj.kset = &acpi_namespace_kset;
- kobject_register(&device->kobj);
+ err = kobject_register(&device->kobj);
+ if (err < 0)
+ printk(KERN_WARNING "%s: kobject_register error: %d\n",
+ __FUNCTION__, err);
create_sysfs_device_files(device);
}
@@ -1450,7 +1456,9 @@ static int __init acpi_scan_init(void)
if (acpi_disabled)
return 0;
- kset_register(&acpi_namespace_kset);
+ result = kset_register(&acpi_namespace_kset);
+ if (result < 0)
+ printk(KERN_ERR PREFIX "kset_register error: %d\n", result);
result = bus_register(&acpi_bus_type);
if (result) {
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index f48227f4c8c..d0d84c43a9d 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -262,7 +262,7 @@ acpi_evaluate_integer(acpi_handle handle,
if (!data)
return AE_BAD_PARAMETER;
- element = kmalloc(sizeof(union acpi_object), GFP_KERNEL);
+ element = kmalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
if (!element)
return AE_NO_MEMORY;
diff --git a/drivers/base/node.c b/drivers/base/node.c
index d7de1753e09..e9b0957f15d 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -64,7 +64,7 @@ static ssize_t node_read_meminfo(struct sys_device * dev, char * buf)
"Node %d Mapped: %8lu kB\n"
"Node %d AnonPages: %8lu kB\n"
"Node %d PageTables: %8lu kB\n"
- "Node %d NFS Unstable: %8lu kB\n"
+ "Node %d NFS_Unstable: %8lu kB\n"
"Node %d Bounce: %8lu kB\n"
"Node %d Slab: %8lu kB\n",
nid, K(i.totalram),
diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c
index b6ee50a2916..fa708248976 100644
--- a/drivers/cdrom/gscd.c
+++ b/drivers/cdrom/gscd.c
@@ -266,7 +266,7 @@ repeat:
goto out;
if (req->cmd != READ) {
- printk("GSCD: bad cmd %lu\n", rq_data_dir(req));
+ printk("GSCD: bad cmd %u\n", rq_data_dir(req));
end_request(req, 0);
goto repeat;
}
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 4ea7bd5f4f5..a369dd6877d 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -142,6 +142,7 @@ typedef struct _moxa_board_conf {
static moxa_board_conf moxa_boards[MAX_BOARDS];
static void __iomem *moxaBaseAddr[MAX_BOARDS];
+static int loadstat[MAX_BOARDS];
struct moxa_str {
int type;
@@ -1688,6 +1689,8 @@ int MoxaDriverPoll(void)
if (moxaCard == 0)
return (-1);
for (card = 0; card < MAX_BOARDS; card++) {
+ if (loadstat[card] == 0)
+ continue;
if ((ports = moxa_boards[card].numPorts) == 0)
continue;
if (readb(moxaIntPend[card]) == 0xff) {
@@ -2903,6 +2906,7 @@ static int moxaloadcode(int cardno, unsigned char __user *tmp, int len)
}
break;
}
+ loadstat[cardno] = 1;
return (0);
}
@@ -2920,7 +2924,7 @@ static int moxaloadc218(int cardno, void __iomem *baseAddr, int len)
len1 = len >> 1;
ptr = (ushort *) moxaBuff;
for (i = 0; i < len1; i++)
- usum += *(ptr + i);
+ usum += le16_to_cpu(*(ptr + i));
retry = 0;
do {
len1 = len >> 1;
@@ -2992,7 +2996,7 @@ static int moxaloadc320(int cardno, void __iomem *baseAddr, int len, int *numPor
wlen = len >> 1;
uptr = (ushort *) moxaBuff;
for (i = 0; i < wlen; i++)
- usum += uptr[i];
+ usum += le16_to_cpu(uptr[i]);
retry = 0;
j = 0;
do {
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index bfdb90242a9..bb0d9199e99 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -153,6 +153,15 @@ int tty_ioctl(struct inode * inode, struct file * file,
static int tty_fasync(int fd, struct file * filp, int on);
static void release_mem(struct tty_struct *tty, int idx);
+/**
+ * alloc_tty_struct - allocate a tty object
+ *
+ * Return a new empty tty structure. The data fields have not
+ * been initialized in any way but has been zeroed
+ *
+ * Locking: none
+ * FIXME: use kzalloc
+ */
static struct tty_struct *alloc_tty_struct(void)
{
@@ -166,6 +175,15 @@ static struct tty_struct *alloc_tty_struct(void)
static void tty_buffer_free_all(struct tty_struct *);
+/**
+ * free_tty_struct - free a disused tty
+ * @tty: tty struct to free
+ *
+ * Free the write buffers, tty queue and tty memory itself.
+ *
+ * Locking: none. Must be called after tty is definitely unused
+ */
+
static inline void free_tty_struct(struct tty_struct *tty)
{
kfree(tty->write_buf);
@@ -175,6 +193,17 @@ static inline void free_tty_struct(struct tty_struct *tty)
#define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)
+/**
+ * tty_name - return tty naming
+ * @tty: tty structure
+ * @buf: buffer for output
+ *
+ * Convert a tty structure into a name. The name reflects the kernel
+ * naming policy and if udev is in use may not reflect user space
+ *
+ * Locking: none
+ */
+
char *tty_name(struct tty_struct *tty, char *buf)
{
if (!tty) /* Hmm. NULL pointer. That's fun. */
@@ -235,6 +264,28 @@ static int check_tty_count(struct tty_struct *tty, const char *routine)
* Tty buffer allocation management
*/
+
+/**
+ * tty_buffer_free_all - free buffers used by a tty
+ * @tty: tty to free from
+ *
+ * Remove all the buffers pending on a tty whether queued with data
+ * or in the free ring. Must be called when the tty is no longer in use
+ *
+ * Locking: none
+ */
+
+
+/**
+ * tty_buffer_free_all - free buffers used by a tty
+ * @tty: tty to free from
+ *
+ * Remove all the buffers pending on a tty whether queued with data
+ * or in the free ring. Must be called when the tty is no longer in use
+ *
+ * Locking: none
+ */
+
static void tty_buffer_free_all(struct tty_struct *tty)
{
struct tty_buffer *thead;
@@ -247,19 +298,47 @@ static void tty_buffer_free_all(struct tty_struct *tty)
kfree(thead);
}
tty->buf.tail = NULL;
+ tty->buf.memory_used = 0;
}
+/**
+ * tty_buffer_init - prepare a tty buffer structure
+ * @tty: tty to initialise
+ *
+ * Set up the initial state of the buffer management for a tty device.
+ * Must be called before the other tty buffer functions are used.
+ *
+ * Locking: none
+ */
+
static void tty_buffer_init(struct tty_struct *tty)
{
spin_lock_init(&tty->buf.lock);
tty->buf.head = NULL;
tty->buf.tail = NULL;
tty->buf.free = NULL;
+ tty->buf.memory_used = 0;
}
-static struct tty_buffer *tty_buffer_alloc(size_t size)
+/**
+ * tty_buffer_alloc - allocate a tty buffer
+ * @tty: tty device
+ * @size: desired size (characters)
+ *
+ * Allocate a new tty buffer to hold the desired number of characters.
+ * Return NULL if out of memory or the allocation would exceed the
+ * per device queue
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
+static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
{
- struct tty_buffer *p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
+ struct tty_buffer *p;
+
+ if (tty->buf.memory_used + size > 65536)
+ return NULL;
+ p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if(p == NULL)
return NULL;
p->used = 0;
@@ -269,17 +348,27 @@ static struct tty_buffer *tty_buffer_alloc(size_t size)
p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
-/* printk("Flip create %p\n", p); */
+ tty->buf.memory_used += size;
return p;
}
-/* Must be called with the tty_read lock held. This needs to acquire strategy
- code to decide if we should kfree or relink a given expired buffer */
+/**
+ * tty_buffer_free - free a tty buffer
+ * @tty: tty owning the buffer
+ * @b: the buffer to free
+ *
+ * Free a tty buffer, or add it to the free list according to our
+ * internal strategy
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
{
/* Dumb strategy for now - should keep some stats */
-/* printk("Flip dispose %p\n", b); */
+ tty->buf.memory_used -= b->size;
+ WARN_ON(tty->buf.memory_used < 0);
+
if(b->size >= 512)
kfree(b);
else {
@@ -288,6 +377,18 @@ static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
}
}
+/**
+ * tty_buffer_find - find a free tty buffer
+ * @tty: tty owning the buffer
+ * @size: characters wanted
+ *
+ * Locate an existing suitable tty buffer or if we are lacking one then
+ * allocate a new one. We round our buffers off in 256 character chunks
+ * to get better allocation behaviour.
+ *
+ * Locking: Caller must hold tty->buf.lock
+ */
+
static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
{
struct tty_buffer **tbh = &tty->buf.free;
@@ -299,20 +400,28 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
t->used = 0;
t->commit = 0;
t->read = 0;
- /* DEBUG ONLY */
-/* memset(t->data, '*', size); */
-/* printk("Flip recycle %p\n", t); */
+ tty->buf.memory_used += t->size;
return t;
}
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
size = (size + 0xFF) & ~ 0xFF;
- return tty_buffer_alloc(size);
+ return tty_buffer_alloc(tty, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
+/**
+ * tty_buffer_request_room - grow tty buffer if needed
+ * @tty: tty structure
+ * @size: size desired
+ *
+ * Make at least size bytes of linear space available for the tty
+ * buffer. If we fail return the size we managed to find.
+ *
+ * Locking: Takes tty->buf.lock
+ */
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
struct tty_buffer *b, *n;
@@ -347,6 +456,18 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size)
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
+/**
+ * tty_insert_flip_string - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. All the characters
+ * passed are marked as without error. Returns the number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
size_t size)
{
@@ -370,6 +491,20 @@ int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
}
EXPORT_SYMBOL(tty_insert_flip_string);
+/**
+ * tty_insert_flip_string_flags - Add characters to the tty buffer
+ * @tty: tty structure
+ * @chars: characters
+ * @flags: flag bytes
+ * @size: size
+ *
+ * Queue a series of bytes to the tty buffering. For each character
+ * the flags array indicates the status of the character. Returns the
+ * number added.
+ *
+ * Locking: Called functions may take tty->buf.lock
+ */
+
int tty_insert_flip_string_flags(struct tty_struct *tty,
const unsigned char *chars, const char *flags, size_t size)
{
@@ -394,6 +529,17 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
}
EXPORT_SYMBOL(tty_insert_flip_string_flags);
+/**
+ * tty_schedule_flip - push characters to ldisc
+ * @tty: tty to push from
+ *
+ * Takes any pending buffers and transfers their ownership to the
+ * ldisc side of the queue. It then schedules those characters for
+ * processing by the line discipline.
+ *
+ * Locking: Takes tty->buf.lock
+ */
+
void tty_schedule_flip(struct tty_struct *tty)
{
unsigned long flags;
@@ -405,12 +551,19 @@ void tty_schedule_flip(struct tty_struct *tty)
}
EXPORT_SYMBOL(tty_schedule_flip);
-/*
+/**
+ * tty_prepare_flip_string - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @size: desired size
+ *
* Prepare a block of space in the buffer for data. Returns the length
* available and buffer pointer to the space which is now allocated and
* accounted for as ready for normal characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
*/
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size)
@@ -427,12 +580,20 @@ int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
-/*
+/**
+ * tty_prepare_flip_string_flags - make room for characters
+ * @tty: tty
+ * @chars: return pointer for character write area
+ * @flags: return pointer for status flag write area
+ * @size: desired size
+ *
* Prepare a block of space in the buffer for data. Returns the length
* available and buffer pointer to the space which is now allocated and
* accounted for as ready for characters. This is used for drivers
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
+ *
+ * Locking: May call functions taking tty->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size)
@@ -451,10 +612,16 @@ EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
-/*
+/**
+ * tty_set_termios_ldisc - set ldisc field
+ * @tty: tty structure
+ * @num: line discipline number
+ *
* This is probably overkill for real world processors but
* they are not on hot paths so a little discipline won't do
* any harm.
+ *
+ * Locking: takes termios_sem
*/
static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
@@ -474,6 +641,19 @@ static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */
+/**
+ * tty_register_ldisc - install a line discipline
+ * @disc: ldisc number
+ * @new_ldisc: pointer to the ldisc object
+ *
+ * Installs a new line discipline into the kernel. The discipline
+ * is set up as unreferenced and then made available to the kernel
+ * from this point onwards.
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
{
unsigned long flags;
@@ -493,6 +673,18 @@ int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
}
EXPORT_SYMBOL(tty_register_ldisc);
+/**
+ * tty_unregister_ldisc - unload a line discipline
+ * @disc: ldisc number
+ * @new_ldisc: pointer to the ldisc object
+ *
+ * Remove a line discipline from the kernel providing it is not
+ * currently in use.
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
int tty_unregister_ldisc(int disc)
{
unsigned long flags;
@@ -512,6 +704,19 @@ int tty_unregister_ldisc(int disc)
}
EXPORT_SYMBOL(tty_unregister_ldisc);
+/**
+ * tty_ldisc_get - take a reference to an ldisc
+ * @disc: ldisc number
+ *
+ * Takes a reference to a line discipline. Deals with refcounts and
+ * module locking counts. Returns NULL if the discipline is not available.
+ * Returns a pointer to the discipline and bumps the ref count if it is
+ * available
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
struct tty_ldisc *tty_ldisc_get(int disc)
{
unsigned long flags;
@@ -540,6 +745,17 @@ struct tty_ldisc *tty_ldisc_get(int disc)
EXPORT_SYMBOL_GPL(tty_ldisc_get);
+/**
+ * tty_ldisc_put - drop ldisc reference
+ * @disc: ldisc number
+ *
+ * Drop a reference to a line discipline. Manage refcounts and
+ * module usage counts
+ *
+ * Locking:
+ * takes tty_ldisc_lock to guard against ldisc races
+ */
+
void tty_ldisc_put(int disc)
{
struct tty_ldisc *ld;
@@ -557,6 +773,19 @@ void tty_ldisc_put(int disc)
EXPORT_SYMBOL_GPL(tty_ldisc_put);
+/**
+ * tty_ldisc_assign - set ldisc on a tty
+ * @tty: tty to assign
+ * @ld: line discipline
+ *
+ * Install an instance of a line discipline into a tty structure. The
+ * ldisc must have a reference count above zero to ensure it remains/
+ * The tty instance refcount starts at zero.
+ *
+ * Locking:
+ * Caller must hold references
+ */
+
static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
tty->ldisc = *ld;
@@ -571,6 +800,8 @@ static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
* the tty ldisc. Return 0 on failure or 1 on success. This is
* used to implement both the waiting and non waiting versions
* of tty_ldisc_ref
+ *
+ * Locking: takes tty_ldisc_lock
*/
static int tty_ldisc_try(struct tty_struct *tty)
@@ -602,6 +833,8 @@ static int tty_ldisc_try(struct tty_struct *tty)
* must also be careful not to hold other locks that will deadlock
* against a discipline change, such as an existing ldisc reference
* (which we check for)
+ *
+ * Locking: call functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
@@ -622,6 +855,8 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
* Dereference the line discipline for the terminal and take a
* reference to it. If the line discipline is in flux then
* return NULL. Can be called from IRQ and timer functions.
+ *
+ * Locking: called functions take tty_ldisc_lock
*/
struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
@@ -639,6 +874,8 @@ EXPORT_SYMBOL_GPL(tty_ldisc_ref);
*
* Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
* be called in IRQ context.
+ *
+ * Locking: takes tty_ldisc_lock
*/
void tty_ldisc_deref(struct tty_ldisc *ld)
@@ -683,6 +920,9 @@ static void tty_ldisc_enable(struct tty_struct *tty)
*
* Set the discipline of a tty line. Must be called from a process
* context.
+ *
+ * Locking: takes tty_ldisc_lock.
+ * called functions take termios_sem
*/
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
@@ -846,9 +1086,17 @@ restart:
return retval;
}
-/*
- * This routine returns a tty driver structure, given a device number
+/**
+ * get_tty_driver - find device of a tty
+ * @dev_t: device identifier
+ * @index: returns the index of the tty
+ *
+ * This routine returns a tty driver structure, given a device number
+ * and also passes back the index number.
+ *
+ * Locking: caller must hold tty_mutex
*/
+
static struct tty_driver *get_tty_driver(dev_t device, int *index)
{
struct tty_driver *p;
@@ -863,11 +1111,17 @@ static struct tty_driver *get_tty_driver(dev_t device, int *index)
return NULL;
}
-/*
- * If we try to write to, or set the state of, a terminal and we're
- * not in the foreground, send a SIGTTOU. If the signal is blocked or
- * ignored, go ahead and perform the operation. (POSIX 7.2)
+/**
+ * tty_check_change - check for POSIX terminal changes
+ * @tty: tty to check
+ *
+ * If we try to write to, or set the state of, a terminal and we're
+ * not in the foreground, send a SIGTTOU. If the signal is blocked or
+ * ignored, go ahead and perform the operation. (POSIX 7.2)
+ *
+ * Locking: none
*/
+
int tty_check_change(struct tty_struct * tty)
{
if (current->signal->tty != tty)
@@ -1005,10 +1259,27 @@ void tty_ldisc_flush(struct tty_struct *tty)
EXPORT_SYMBOL_GPL(tty_ldisc_flush);
-/*
- * This can be called by the "eventd" kernel thread. That is process synchronous,
- * but doesn't hold any locks, so we need to make sure we have the appropriate
- * locks for what we're doing..
+/**
+ * do_tty_hangup - actual handler for hangup events
+ * @data: tty device
+ *
+ * This can be called by the "eventd" kernel thread. That is process
+ * synchronous but doesn't hold any locks, so we need to make sure we
+ * have the appropriate locks for what we're doing.
+ *
+ * The hangup event clears any pending redirections onto the hung up
+ * device. It ensures future writes will error and it does the needed
+ * line discipline hangup and signal delivery. The tty object itself
+ * remains intact.
+ *
+ * Locking:
+ * BKL
+ * redirect lock for undoing redirection
+ * file list lock for manipulating list of ttys
+ * tty_ldisc_lock from called functions
+ * termios_sem resetting termios data
+ * tasklist_lock to walk task list for hangup event
+ *
*/
static void do_tty_hangup(void *data)
{
@@ -1133,6 +1404,14 @@ static void do_tty_hangup(void *data)
fput(f);
}
+/**
+ * tty_hangup - trigger a hangup event
+ * @tty: tty to hangup
+ *
+ * A carrier loss (virtual or otherwise) has occurred on this like
+ * schedule a hangup sequence to run after this event.
+ */
+
void tty_hangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
@@ -1145,6 +1424,15 @@ void tty_hangup(struct tty_struct * tty)
EXPORT_SYMBOL(tty_hangup);
+/**
+ * tty_vhangup - process vhangup
+ * @tty: tty to hangup
+ *
+ * The user has asked via system call for the terminal to be hung up.
+ * We do this synchronously so that when the syscall returns the process
+ * is complete. That guarantee is neccessary for security reasons.
+ */
+
void tty_vhangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
@@ -1156,6 +1444,14 @@ void tty_vhangup(struct tty_struct * tty)
}
EXPORT_SYMBOL(tty_vhangup);
+/**
+ * tty_hung_up_p - was tty hung up
+ * @filp: file pointer of tty
+ *
+ * Return true if the tty has been subject to a vhangup or a carrier
+ * loss
+ */
+
int tty_hung_up_p(struct file * filp)
{
return (filp->f_op == &hung_up_tty_fops);
@@ -1163,19 +1459,28 @@ int tty_hung_up_p(struct file * filp)
EXPORT_SYMBOL(tty_hung_up_p);
-/*
- * This function is typically called only by the session leader, when
- * it wants to disassociate itself from its controlling tty.
+/**
+ * disassociate_ctty - disconnect controlling tty
+ * @on_exit: true if exiting so need to "hang up" the session
+ *
+ * This function is typically called only by the session leader, when
+ * it wants to disassociate itself from its controlling tty.
*
- * It performs the following functions:
+ * It performs the following functions:
* (1) Sends a SIGHUP and SIGCONT to the foreground process group
* (2) Clears the tty from being controlling the session
* (3) Clears the controlling tty for all processes in the
* session group.
*
- * The argument on_exit is set to 1 if called when a process is
- * exiting; it is 0 if called by the ioctl TIOCNOTTY.
+ * The argument on_exit is set to 1 if called when a process is
+ * exiting; it is 0 if called by the ioctl TIOCNOTTY.
+ *
+ * Locking: tty_mutex is taken to protect current->signal->tty
+ * BKL is taken for hysterical raisins
+ * Tasklist lock is taken (under tty_mutex) to walk process
+ * lists for the session.
*/
+
void disassociate_ctty(int on_exit)
{
struct tty_struct *tty;
@@ -1222,6 +1527,25 @@ void disassociate_ctty(int on_exit)
unlock_kernel();
}
+
+/**
+ * stop_tty - propogate flow control
+ * @tty: tty to stop
+ *
+ * Perform flow control to the driver. For PTY/TTY pairs we
+ * must also propogate the TIOCKPKT status. May be called
+ * on an already stopped device and will not re-call the driver
+ * method.
+ *
+ * This functionality is used by both the line disciplines for
+ * halting incoming flow and by the driver. It may therefore be
+ * called from any context, may be under the tty atomic_write_lock
+ * but not always.
+ *
+ * Locking:
+ * Broken. Relies on BKL which is unsafe here.
+ */
+
void stop_tty(struct tty_struct *tty)
{
if (tty->stopped)
@@ -1238,6 +1562,19 @@ void stop_tty(struct tty_struct *tty)
EXPORT_SYMBOL(stop_tty);
+/**
+ * start_tty - propogate flow control
+ * @tty: tty to start
+ *
+ * Start a tty that has been stopped if at all possible. Perform
+ * any neccessary wakeups and propogate the TIOCPKT status. If this
+ * is the tty was previous stopped and is being started then the
+ * driver start method is invoked and the line discipline woken.
+ *
+ * Locking:
+ * Broken. Relies on BKL which is unsafe here.
+ */
+
void start_tty(struct tty_struct *tty)
{
if (!tty->stopped || tty->flow_stopped)
@@ -1258,6 +1595,23 @@ void start_tty(struct tty_struct *tty)
EXPORT_SYMBOL(start_tty);
+/**
+ * tty_read - read method for tty device files
+ * @file: pointer to tty file
+ * @buf: user buffer
+ * @count: size of user buffer
+ * @ppos: unused
+ *
+ * Perform the read system call function on this terminal device. Checks
+ * for hung up devices before calling the line discipline method.
+ *
+ * Locking:
+ * Locks the line discipline internally while needed
+ * For historical reasons the line discipline read method is
+ * invoked under the BKL. This will go away in time so do not rely on it
+ * in new code. Multiple read calls may be outstanding in parallel.
+ */
+
static ssize_t tty_read(struct file * file, char __user * buf, size_t count,
loff_t *ppos)
{
@@ -1302,6 +1656,7 @@ static inline ssize_t do_tty_write(
ssize_t ret = 0, written = 0;
unsigned int chunk;
+ /* FIXME: O_NDELAY ... */
if (mutex_lock_interruptible(&tty->atomic_write_lock)) {
return -ERESTARTSYS;
}
@@ -1318,6 +1673,9 @@ static inline ssize_t do_tty_write(
* layer has problems with bigger chunks. It will
* claim to be able to handle more characters than
* it actually does.
+ *
+ * FIXME: This can probably go away now except that 64K chunks
+ * are too likely to fail unless switched to vmalloc...
*/
chunk = 2048;
if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
@@ -1375,6 +1733,24 @@ static inline ssize_t do_tty_write(
}
+/**
+ * tty_write - write method for tty device file
+ * @file: tty file pointer
+ * @buf: user data to write
+ * @count: bytes to write
+ * @ppos: unused
+ *
+ * Write data to a tty device via the line discipline.
+ *
+ * Locking:
+ * Locks the line discipline as required
+ * Writes to the tty driver are serialized by the atomic_write_lock
+ * and are then processed in chunks to the device. The line discipline
+ * write method will not be involked in parallel for each device
+ * The line discipline write method is called under the big
+ * kernel lock for historical reasons. New code should not rely on this.
+ */
+
static ssize_t tty_write(struct file * file, const char __user * buf, size_t count,
loff_t *ppos)
{
@@ -1422,7 +1798,18 @@ ssize_t redirected_tty_write(struct file * file, const char __user * buf, size_t
static char ptychar[] = "pqrstuvwxyzabcde";
-static inline void pty_line_name(struct tty_driver *driver, int index, char *p)
+/**
+ * pty_line_name - generate name for a pty
+ * @driver: the tty driver in use
+ * @index: the minor number
+ * @p: output buffer of at least 6 bytes
+ *
+ * Generate a name from a driver reference and write it to the output
+ * buffer.
+ *
+ * Locking: None
+ */
+static void pty_line_name(struct tty_driver *driver, int index, char *p)
{
int i = index + driver->name_base;
/* ->name is initialized to "ttyp", but "tty" is expected */
@@ -1431,24 +1818,53 @@ static inline void pty_line_name(struct tty_driver *driver, int index, char *p)
ptychar[i >> 4 & 0xf], i & 0xf);
}
-static inline void tty_line_name(struct tty_driver *driver, int index, char *p)
+/**
+ * pty_line_name - generate name for a tty
+ * @driver: the tty driver in use
+ * @index: the minor number
+ * @p: output buffer of at least 7 bytes
+ *
+ * Generate a name from a driver reference and write it to the output
+ * buffer.
+ *
+ * Locking: None
+ */
+static void tty_line_name(struct tty_driver *driver, int index, char *p)
{
sprintf(p, "%s%d", driver->name, index + driver->name_base);
}
-/*
+/**
+ * init_dev - initialise a tty device
+ * @driver: tty driver we are opening a device on
+ * @idx: device index
+ * @tty: returned tty structure
+ *
+ * Prepare a tty device. This may not be a "new" clean device but
+ * could also be an active device. The pty drivers require special
+ * handling because of this.
+ *
+ * Locking:
+ * The function is called under the tty_mutex, which
+ * protects us from the tty struct or driver itself going away.
+ *
+ * On exit the tty device has the line discipline attached and
+ * a reference count of 1. If a pair was created for pty/tty use
+ * and the other was a pty master then it too has a reference count of 1.
+ *
* WSH 06/09/97: Rewritten to remove races and properly clean up after a
* failed open. The new code protects the open with a mutex, so it's
* really quite straightforward. The mutex locking can probably be
* relaxed for the (most common) case of reopening a tty.
*/
+
static int init_dev(struct tty_driver *driver, int idx,
struct tty_struct **ret_tty)
{
struct tty_struct *tty, *o_tty;
struct termios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct termios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
- int retval=0;
+ int retval = 0;
/* check whether we're reopening an existing tty */
if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
@@ -1662,10 +2078,20 @@ release_mem_out:
goto end_init;
}
-/*
- * Releases memory associated with a tty structure, and clears out the
- * driver table slots.
+/**
+ * release_mem - release tty structure memory
+ *
+ * Releases memory associated with a tty structure, and clears out the
+ * driver table slots. This function is called when a device is no longer
+ * in use. It also gets called when setup of a device fails.
+ *
+ * Locking:
+ * tty_mutex - sometimes only
+ * takes the file list lock internally when working on the list
+ * of ttys that the driver keeps.
+ * FIXME: should we require tty_mutex is held here ??
*/
+
static void release_mem(struct tty_struct *tty, int idx)
{
struct tty_struct *o_tty;
@@ -2006,18 +2432,27 @@ static void release_dev(struct file * filp)
}
-/*
- * tty_open and tty_release keep up the tty count that contains the
- * number of opens done on a tty. We cannot use the inode-count, as
- * different inodes might point to the same tty.
+/**
+ * tty_open - open a tty device
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * tty_open and tty_release keep up the tty count that contains the
+ * number of opens done on a tty. We cannot use the inode-count, as
+ * different inodes might point to the same tty.
*
- * Open-counting is needed for pty masters, as well as for keeping
- * track of serial lines: DTR is dropped when the last close happens.
- * (This is not done solely through tty->count, now. - Ted 1/27/92)
+ * Open-counting is needed for pty masters, as well as for keeping
+ * track of serial lines: DTR is dropped when the last close happens.
+ * (This is not done solely through tty->count, now. - Ted 1/27/92)
*
- * The termios state of a pty is reset on first open so that
- * settings don't persist across reuse.
+ * The termios state of a pty is reset on first open so that
+ * settings don't persist across reuse.
+ *
+ * Locking: tty_mutex protects current->signal->tty, get_tty_driver and
+ * init_dev work. tty->count should protect the rest.
+ * task_lock is held to update task details for sessions
*/
+
static int tty_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
@@ -2132,6 +2567,18 @@ got_driver:
}
#ifdef CONFIG_UNIX98_PTYS
+/**
+ * ptmx_open - open a unix 98 pty master
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * Allocate a unix98 pty master device from the ptmx driver.
+ *
+ * Locking: tty_mutex protects theinit_dev work. tty->count should
+ protect the rest.
+ * allocated_ptys_lock handles the list of free pty numbers
+ */
+
static int ptmx_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
@@ -2191,6 +2638,18 @@ out:
}
#endif
+/**
+ * tty_release - vfs callback for close
+ * @inode: inode of tty
+ * @filp: file pointer for handle to tty
+ *
+ * Called the last time each file handle is closed that references
+ * this tty. There may however be several such references.
+ *
+ * Locking:
+ * Takes bkl. See release_dev
+ */
+
static int tty_release(struct inode * inode, struct file * filp)
{
lock_kernel();
@@ -2199,7 +2658,18 @@ static int tty_release(struct inode * inode, struct file * filp)
return 0;
}
-/* No kernel lock held - fine */
+/**
+ * tty_poll - check tty status
+ * @filp: file being polled
+ * @wait: poll wait structures to update
+ *
+ * Call the line discipline polling method to obtain the poll
+ * status of the device.
+ *
+ * Locking: locks called line discipline but ldisc poll method
+ * may be re-entered freely by other callers.
+ */
+
static unsigned int tty_poll(struct file * filp, poll_table * wait)
{
struct tty_struct * tty;
@@ -2243,6 +2713,21 @@ static int tty_fasync(int fd, struct file * filp, int on)
return 0;
}
+/**
+ * tiocsti - fake input character
+ * @tty: tty to fake input into
+ * @p: pointer to character
+ *
+ * Fake input to a tty device. Does the neccessary locking and
+ * input management.
+ *
+ * FIXME: does not honour flow control ??
+ *
+ * Locking:
+ * Called functions take tty_ldisc_lock
+ * current->signal->tty check is safe without locks
+ */
+
static int tiocsti(struct tty_struct *tty, char __user *p)
{
char ch, mbz = 0;
@@ -2258,6 +2743,18 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
return 0;
}
+/**
+ * tiocgwinsz - implement window query ioctl
+ * @tty; tty
+ * @arg: user buffer for result
+ *
+ * Copies the kernel idea of the window size into the user buffer. No
+ * locking is done.
+ *
+ * FIXME: Returning random values racing a window size set is wrong
+ * should lock here against that
+ */
+
static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg)
{
if (copy_to_user(arg, &tty->winsize, sizeof(*arg)))
@@ -2265,6 +2762,24 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user * arg)
return 0;
}
+/**
+ * tiocswinsz - implement window size set ioctl
+ * @tty; tty
+ * @arg: user buffer for result
+ *
+ * Copies the user idea of the window size to the kernel. Traditionally
+ * this is just advisory information but for the Linux console it
+ * actually has driver level meaning and triggers a VC resize.
+ *
+ * Locking:
+ * The console_sem is used to ensure we do not try and resize
+ * the console twice at once.
+ * FIXME: Two racing size sets may leave the console and kernel
+ * parameters disagreeing. Is this exploitable ?
+ * FIXME: Random values racing a window size get is wrong
+ * should lock here against that
+ */
+
static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize __user * arg)
{
@@ -2294,6 +2809,15 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
return 0;
}
+/**
+ * tioccons - allow admin to move logical console
+ * @file: the file to become console
+ *
+ * Allow the adminstrator to move the redirected console device
+ *
+ * Locking: uses redirect_lock to guard the redirect information
+ */
+
static int tioccons(struct file *file)
{
if (!capable(CAP_SYS_ADMIN))
@@ -2319,6 +2843,17 @@ static int tioccons(struct file *file)
return 0;
}
+/**
+ * fionbio - non blocking ioctl
+ * @file: file to set blocking value
+ * @p: user parameter
+ *
+ * Historical tty interfaces had a blocking control ioctl before
+ * the generic functionality existed. This piece of history is preserved
+ * in the expected tty API of posix OS's.
+ *
+ * Locking: none, the open fle handle ensures it won't go away.
+ */
static int fionbio(struct file *file, int __user *p)
{
@@ -2334,6 +2869,23 @@ static int fionbio(struct file *file, int __user *p)
return 0;
}
+/**
+ * tiocsctty - set controlling tty
+ * @tty: tty structure
+ * @arg: user argument
+ *
+ * This ioctl is used to manage job control. It permits a session
+ * leader to set this tty as the controlling tty for the session.
+ *
+ * Locking:
+ * Takes tasklist lock internally to walk sessions
+ * Takes task_lock() when updating signal->tty
+ *
+ * FIXME: tty_mutex is needed to protect signal->tty references.
+ * FIXME: why task_lock on the signal->tty reference ??
+ *
+ */
+
static int tiocsctty(struct tty_struct *tty, int arg)
{
struct task_struct *p;
@@ -2374,6 +2926,18 @@ static int tiocsctty(struct tty_struct *tty, int arg)
return 0;
}
+/**
+ * tiocgpgrp - get process group
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty pased by the user if a pty else the tty
+ * @p: returned pid
+ *
+ * Obtain the process group of the tty. If there is no process group
+ * return an error.
+ *
+ * Locking: none. Reference to ->signal->tty is safe.
+ */
+
static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
/*
@@ -2385,6 +2949,20 @@ static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
return put_user(real_tty->pgrp, p);
}
+/**
+ * tiocspgrp - attempt to set process group
+ * @tty: tty passed by user
+ * @real_tty: tty side device matching tty passed by user
+ * @p: pid pointer
+ *
+ * Set the process group of the tty to the session passed. Only
+ * permitted where the tty session is our session.
+ *
+ * Locking: None
+ *
+ * FIXME: current->signal->tty referencing is unsafe.
+ */
+
static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
pid_t pgrp;
@@ -2408,6 +2986,18 @@ static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t
return 0;
}
+/**
+ * tiocgsid - get session id
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty pased by the user if a pty else the tty
+ * @p: pointer to returned session id
+ *
+ * Obtain the session id of the tty. If there is no session
+ * return an error.
+ *
+ * Locking: none. Reference to ->signal->tty is safe.
+ */
+
static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
/*
@@ -2421,6 +3011,16 @@ static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t _
return put_user(real_tty->session, p);
}
+/**
+ * tiocsetd - set line discipline
+ * @tty: tty device
+ * @p: pointer to user data
+ *
+ * Set the line discipline according to user request.
+ *
+ * Locking: see tty_set_ldisc, this function is just a helper
+ */
+
static int tiocsetd(struct tty_struct *tty, int __user *p)
{
int ldisc;
@@ -2430,6 +3030,21 @@ static int tiocsetd(struct tty_struct *tty, int __user *p)
return tty_set_ldisc(tty, ldisc);
}
+/**
+ * send_break - performed time break
+ * @tty: device to break on
+ * @duration: timeout in mS
+ *
+ * Perform a timed break on hardware that lacks its own driver level
+ * timed break functionality.
+ *
+ * Locking:
+ * None
+ *
+ * FIXME:
+ * What if two overlap
+ */
+
static int send_break(struct tty_struct *tty, unsigned int duration)
{
tty->driver->break_ctl(tty, -1);
@@ -2442,8 +3057,19 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
return 0;
}
-static int
-tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
+/**
+ * tiocmget - get modem status
+ * @tty: tty device
+ * @file: user file pointer
+ * @p: pointer to result
+ *
+ * Obtain the modem status bits from the tty driver if the feature
+ * is supported. Return -EINVAL if it is not available.
+ *
+ * Locking: none (up to the driver)
+ */
+
+static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
{
int retval = -EINVAL;
@@ -2456,8 +3082,20 @@ tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
return retval;
}
-static int
-tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
+/**
+ * tiocmset - set modem status
+ * @tty: tty device
+ * @file: user file pointer
+ * @cmd: command - clear bits, set bits or set all
+ * @p: pointer to desired bits
+ *
+ * Set the modem status bits from the tty driver if the feature
+ * is supported. Return -EINVAL if it is not available.
+ *
+ * Locking: none (up to the driver)
+ */
+
+static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
unsigned __user *p)
{
int retval = -EINVAL;
@@ -2573,6 +3211,7 @@ int tty_ioctl(struct inode * inode, struct file * file,
clear_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNOTTY:
+ /* FIXME: taks lock or tty_mutex ? */
if (current->signal->tty != tty)
return -ENOTTY;
if (current->signal->leader)
@@ -2753,9 +3392,16 @@ void do_SAK(struct tty_struct *tty)
EXPORT_SYMBOL(do_SAK);
-/*
- * This routine is called out of the software interrupt to flush data
- * from the buffer chain to the line discipline.
+/**
+ * flush_to_ldisc
+ * @private_: tty structure passed from work queue.
+ *
+ * This routine is called out of the software interrupt to flush data
+ * from the buffer chain to the line discipline.
+ *
+ * Locking: holds tty->buf.lock to guard buffer list. Drops the lock
+ * while invoking the line discipline receive_buf method. The
+ * receive_buf method is single threaded for each tty instance.
*/
static void flush_to_ldisc(void *private_)
@@ -2831,6 +3477,8 @@ static int n_baud_table = ARRAY_SIZE(baud_table);
* Convert termios baud rate data into a speed. This should be called
* with the termios lock held if this termios is a terminal termios
* structure. May change the termios data.
+ *
+ * Locking: none
*/
int tty_termios_baud_rate(struct termios *termios)
@@ -2859,6 +3507,8 @@ EXPORT_SYMBOL(tty_termios_baud_rate);
* Returns the baud rate as an integer for this terminal. The
* termios lock must be held by the caller and the terminal bit
* flags may be updated.
+ *
+ * Locking: none
*/
int tty_get_baud_rate(struct tty_struct *tty)
@@ -2888,6 +3538,8 @@ EXPORT_SYMBOL(tty_get_baud_rate);
*
* In the event of the queue being busy for flipping the work will be
* held off and retried later.
+ *
+ * Locking: tty buffer lock. Driver locks in low latency mode.
*/
void tty_flip_buffer_push(struct tty_struct *tty)
@@ -2907,9 +3559,16 @@ void tty_flip_buffer_push(struct tty_struct *tty)
EXPORT_SYMBOL(tty_flip_buffer_push);
-/*
- * This subroutine initializes a tty structure.
+/**
+ * initialize_tty_struct
+ * @tty: tty to initialize
+ *
+ * This subroutine initializes a tty structure that has been newly
+ * allocated.
+ *
+ * Locking: none - tty in question must not be exposed at this point
*/
+
static void initialize_tty_struct(struct tty_struct *tty)
{
memset(tty, 0, sizeof(struct tty_struct));
@@ -2935,6 +3594,7 @@ static void initialize_tty_struct(struct tty_struct *tty)
/*
* The default put_char routine if the driver did not define one.
*/
+
static void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
{
tty->driver->write(tty, &ch, 1);
@@ -2943,19 +3603,23 @@ static void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
static struct class *tty_class;
/**
- * tty_register_device - register a tty device
- * @driver: the tty driver that describes the tty device
- * @index: the index in the tty driver for this tty device
- * @device: a struct device that is associated with this tty device.
- * This field is optional, if there is no known struct device for this
- * tty device it can be set to NULL safely.
+ * tty_register_device - register a tty device
+ * @driver: the tty driver that describes the tty device
+ * @index: the index in the tty driver for this tty device
+ * @device: a struct device that is associated with this tty device.
+ * This field is optional, if there is no known struct device
+ * for this tty device it can be set to NULL safely.
*
- * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error).
+ * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error).
*
- * This call is required to be made to register an individual tty device if
- * the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If that
- * bit is not set, this function should not be called by a tty driver.
+ * This call is required to be made to register an individual tty device
+ * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
+ * that bit is not set, this function should not be called by a tty
+ * driver.
+ *
+ * Locking: ??
*/
+
struct class_device *tty_register_device(struct tty_driver *driver,
unsigned index, struct device *device)
{
@@ -2977,13 +3641,16 @@ struct class_device *tty_register_device(struct tty_driver *driver,
}
/**
- * tty_unregister_device - unregister a tty device
- * @driver: the tty driver that describes the tty device
- * @index: the index in the tty driver for this tty device
+ * tty_unregister_device - unregister a tty device
+ * @driver: the tty driver that describes the tty device
+ * @index: the index in the tty driver for this tty device
*
- * If a tty device is registered with a call to tty_register_device() then
- * this function must be made when the tty device is gone.
+ * If a tty device is registered with a call to tty_register_device() then
+ * this function must be called when the tty device is gone.
+ *
+ * Locking: ??
*/
+
void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
class_device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index);
@@ -3094,7 +3761,6 @@ int tty_register_driver(struct tty_driver *driver)
driver->cdev.owner = driver->owner;
error = cdev_add(&driver->cdev, dev, driver->num);
if (error) {
- cdev_del(&driver->cdev);
unregister_chrdev_region(dev, driver->num);
driver->ttys = NULL;
driver->termios = driver->termios_locked = NULL;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index f19cf9d7792..4ad47d321bd 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -36,6 +36,18 @@
#define TERMIOS_WAIT 2
#define TERMIOS_TERMIO 4
+
+/**
+ * tty_wait_until_sent - wait for I/O to finish
+ * @tty: tty we are waiting for
+ * @timeout: how long we will wait
+ *
+ * Wait for characters pending in a tty driver to hit the wire, or
+ * for a timeout to occur (eg due to flow control)
+ *
+ * Locking: none
+ */
+
void tty_wait_until_sent(struct tty_struct * tty, long timeout)
{
DECLARE_WAITQUEUE(wait, current);
@@ -94,6 +106,18 @@ static void unset_locked_termios(struct termios *termios,
old->c_cc[i] : termios->c_cc[i];
}
+/**
+ * change_termios - update termios values
+ * @tty: tty to update
+ * @new_termios: desired new value
+ *
+ * Perform updates to the termios values set on this terminal. There
+ * is a bit of layering violation here with n_tty in terms of the
+ * internal knowledge of this function.
+ *
+ * Locking: termios_sem
+ */
+
static void change_termios(struct tty_struct * tty, struct termios * new_termios)
{
int canon_change;
@@ -155,6 +179,19 @@ static void change_termios(struct tty_struct * tty, struct termios * new_termios
up(&tty->termios_sem);
}
+/**
+ * set_termios - set termios values for a tty
+ * @tty: terminal device
+ * @arg: user data
+ * @opt: option information
+ *
+ * Helper function to prepare termios data and run neccessary other
+ * functions before using change_termios to do the actual changes.
+ *
+ * Locking:
+ * Called functions take ldisc and termios_sem locks
+ */
+
static int set_termios(struct tty_struct * tty, void __user *arg, int opt)
{
struct termios tmp_termios;
@@ -284,6 +321,17 @@ static void set_sgflags(struct termios * termios, int flags)
}
}
+/**
+ * set_sgttyb - set legacy terminal values
+ * @tty: tty structure
+ * @sgttyb: pointer to old style terminal structure
+ *
+ * Updates a terminal from the legacy BSD style terminal information
+ * structure.
+ *
+ * Locking: termios_sem
+ */
+
static int set_sgttyb(struct tty_struct * tty, struct sgttyb __user * sgttyb)
{
int retval;
@@ -369,9 +417,16 @@ static int set_ltchars(struct tty_struct * tty, struct ltchars __user * ltchars)
}
#endif
-/*
- * Send a high priority character to the tty.
+/**
+ * send_prio_char - send priority character
+ *
+ * Send a high priority character to the tty even if stopped
+ *
+ * Locking: none
+ *
+ * FIXME: overlapping calls with start/stop tty lose state of tty
*/
+
static void send_prio_char(struct tty_struct *tty, char ch)
{
int was_stopped = tty->stopped;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index eccffaf26fa..a5628a8b662 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -1011,6 +1011,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
return -EPERM;
vt_dont_switch = 0;
return 0;
+ case VT_GETHIFONTMASK:
+ return put_user(vc->vc_hi_font_mask, (unsigned short __user *)arg);
default:
return -ENOIOCTLCMD;
}
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index cc15c4f2e9e..35ad1b03272 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -26,6 +26,7 @@
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/err.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
@@ -64,17 +65,17 @@
#define ABIT_UGURU_IN_SENSOR 0
#define ABIT_UGURU_TEMP_SENSOR 1
#define ABIT_UGURU_NC 2
-/* Timeouts / Retries, if these turn out to need a lot of fiddling we could
- convert them to params. */
-/* 250 was determined by trial and error, 200 works most of the time, but not
- always. I assume this is cpu-speed independent, since the ISA-bus and not
- the CPU should be the bottleneck. Note that 250 sometimes is still not
- enough (only reported on AN7 mb) this is handled by a higher layer. */
-#define ABIT_UGURU_WAIT_TIMEOUT 250
+/* In many cases we need to wait for the uGuru to reach a certain status, most
+ of the time it will reach this status within 30 - 90 ISA reads, and thus we
+ can best busy wait. This define gives the total amount of reads to try. */
+#define ABIT_UGURU_WAIT_TIMEOUT 125
+/* However sometimes older versions of the uGuru seem to be distracted and they
+ do not respond for a long time. To handle this we sleep before each of the
+ last ABIT_UGURU_WAIT_TIMEOUT_SLEEP tries. */
+#define ABIT_UGURU_WAIT_TIMEOUT_SLEEP 5
/* Normally all expected status in abituguru_ready, are reported after the
- first read, but sometimes not and we need to poll, 5 polls was not enough
- 50 sofar is. */
-#define ABIT_UGURU_READY_TIMEOUT 50
+ first read, but sometimes not and we need to poll. */
+#define ABIT_UGURU_READY_TIMEOUT 5
/* Maximum 3 retries on timedout reads/writes, delay 200 ms before retrying */
#define ABIT_UGURU_MAX_RETRIES 3
#define ABIT_UGURU_RETRY_DELAY (HZ/5)
@@ -226,6 +227,10 @@ static int abituguru_wait(struct abituguru_data *data, u8 state)
timeout--;
if (timeout == 0)
return -EBUSY;
+ /* sleep a bit before our last few tries, see the comment on
+ this where ABIT_UGURU_WAIT_TIMEOUT_SLEEP is defined. */
+ if (timeout <= ABIT_UGURU_WAIT_TIMEOUT_SLEEP)
+ msleep(0);
}
return 0;
}
@@ -256,6 +261,7 @@ static int abituguru_ready(struct abituguru_data *data)
"CMD reg does not hold 0xAC after ready command\n");
return -EIO;
}
+ msleep(0);
}
/* After this the ABIT_UGURU_DATA port should contain
@@ -268,6 +274,7 @@ static int abituguru_ready(struct abituguru_data *data)
"state != more input after ready command\n");
return -EIO;
}
+ msleep(0);
}
data->uguru_ready = 1;
@@ -331,7 +338,8 @@ static int abituguru_read(struct abituguru_data *data,
/* And read the data */
for (i = 0; i < count; i++) {
if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) {
- ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for "
+ ABIT_UGURU_DEBUG(retries ? 1 : 3,
+ "timeout exceeded waiting for "
"read state (bank: %d, sensor: %d)\n",
(int)bank_addr, (int)sensor_addr);
break;
@@ -350,7 +358,9 @@ static int abituguru_read(struct abituguru_data *data,
static int abituguru_write(struct abituguru_data *data,
u8 bank_addr, u8 sensor_addr, u8 *buf, int count)
{
- int i;
+ /* We use the ready timeout as we have to wait for 0xAC just like the
+ ready function */
+ int i, timeout = ABIT_UGURU_READY_TIMEOUT;
/* Send the address */
i = abituguru_send_address(data, bank_addr, sensor_addr,
@@ -370,7 +380,8 @@ static int abituguru_write(struct abituguru_data *data,
}
/* Now we need to wait till the chip is ready to be read again,
- don't ask why */
+ so that we can read 0xAC as confirmation that our write has
+ succeeded. */
if (abituguru_wait(data, ABIT_UGURU_STATUS_READ)) {
ABIT_UGURU_DEBUG(1, "timeout exceeded waiting for read state "
"after write (bank: %d, sensor: %d)\n", (int)bank_addr,
@@ -379,11 +390,15 @@ static int abituguru_write(struct abituguru_data *data,
}
/* Cmd port MUST be read now and should contain 0xAC */
- if (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) {
- ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after write "
- "(bank: %d, sensor: %d)\n", (int)bank_addr,
- (int)sensor_addr);
- return -EIO;
+ while (inb_p(data->addr + ABIT_UGURU_CMD) != 0xAC) {
+ timeout--;
+ if (timeout == 0) {
+ ABIT_UGURU_DEBUG(1, "CMD reg does not hold 0xAC after "
+ "write (bank: %d, sensor: %d)\n",
+ (int)bank_addr, (int)sensor_addr);
+ return -EIO;
+ }
+ msleep(0);
}
/* Last put the chip back in ready state */
@@ -403,7 +418,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 sensor_addr)
{
u8 val, buf[3];
- int ret = ABIT_UGURU_NC;
+ int i, ret = -ENODEV; /* error is the most common used retval :| */
/* If overriden by the user return the user selected type */
if (bank1_types[sensor_addr] >= ABIT_UGURU_IN_SENSOR &&
@@ -439,7 +454,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
buf[2] = 250;
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
buf, 3) != 3)
- return -ENODEV;
+ goto abituguru_detect_bank1_sensor_type_exit;
/* Now we need 20 ms to give the uguru time to read the sensors
and raise a voltage alarm */
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -447,21 +462,16 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
/* Check for alarm and check the alarm is a volt low alarm. */
if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3,
ABIT_UGURU_MAX_RETRIES) != 3)
- return -ENODEV;
+ goto abituguru_detect_bank1_sensor_type_exit;
if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) {
if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1,
sensor_addr, buf, 3,
ABIT_UGURU_MAX_RETRIES) != 3)
- return -ENODEV;
+ goto abituguru_detect_bank1_sensor_type_exit;
if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) {
- /* Restore original settings */
- if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2,
- sensor_addr,
- data->bank1_settings[sensor_addr],
- 3) != 3)
- return -ENODEV;
ABIT_UGURU_DEBUG(2, " found volt sensor\n");
- return ABIT_UGURU_IN_SENSOR;
+ ret = ABIT_UGURU_IN_SENSOR;
+ goto abituguru_detect_bank1_sensor_type_exit;
} else
ABIT_UGURU_DEBUG(2, " alarm raised during volt "
"sensor test, but volt low flag not set\n");
@@ -477,7 +487,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
buf[2] = 10;
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
buf, 3) != 3)
- return -ENODEV;
+ goto abituguru_detect_bank1_sensor_type_exit;
/* Now we need 50 ms to give the uguru time to read the sensors
and raise a temp alarm */
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -485,15 +495,16 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
/* Check for alarm and check the alarm is a temp high alarm. */
if (abituguru_read(data, ABIT_UGURU_ALARM_BANK, 0, buf, 3,
ABIT_UGURU_MAX_RETRIES) != 3)
- return -ENODEV;
+ goto abituguru_detect_bank1_sensor_type_exit;
if (buf[sensor_addr/8] & (0x01 << (sensor_addr % 8))) {
if (abituguru_read(data, ABIT_UGURU_SENSOR_BANK1 + 1,
sensor_addr, buf, 3,
ABIT_UGURU_MAX_RETRIES) != 3)
- return -ENODEV;
+ goto abituguru_detect_bank1_sensor_type_exit;
if (buf[0] & ABIT_UGURU_TEMP_HIGH_ALARM_FLAG) {
- ret = ABIT_UGURU_TEMP_SENSOR;
ABIT_UGURU_DEBUG(2, " found temp sensor\n");
+ ret = ABIT_UGURU_TEMP_SENSOR;
+ goto abituguru_detect_bank1_sensor_type_exit;
} else
ABIT_UGURU_DEBUG(2, " alarm raised during temp "
"sensor test, but temp high flag not set\n");
@@ -501,11 +512,23 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
ABIT_UGURU_DEBUG(2, " alarm not raised during temp sensor "
"test\n");
- /* Restore original settings */
- if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
- data->bank1_settings[sensor_addr], 3) != 3)
+ ret = ABIT_UGURU_NC;
+abituguru_detect_bank1_sensor_type_exit:
+ /* Restore original settings, failing here is really BAD, it has been
+ reported that some BIOS-es hang when entering the uGuru menu with
+ invalid settings present in the uGuru, so we try this 3 times. */
+ for (i = 0; i < 3; i++)
+ if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2,
+ sensor_addr, data->bank1_settings[sensor_addr],
+ 3) == 3)
+ break;
+ if (i == 3) {
+ printk(KERN_ERR ABIT_UGURU_NAME
+ ": Fatal error could not restore original settings. "
+ "This should never happen please report this to the "
+ "abituguru maintainer (see MAINTAINERS)\n");
return -ENODEV;
-
+ }
return ret;
}
@@ -1305,7 +1328,7 @@ static struct abituguru_data *abituguru_update_device(struct device *dev)
data->update_timeouts = 0;
LEAVE_UPDATE:
/* handle timeout condition */
- if (err == -EBUSY) {
+ if (!success && (err == -EBUSY || err >= 0)) {
/* No overflow please */
if (data->update_timeouts < 255u)
data->update_timeouts++;
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index e7e27049fbf..0be6fd6a267 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -43,13 +43,12 @@
/*-------------------------------------------------------------------------*/
#define DRIVER_VERSION "2 May 2005"
-#define DRIVER_NAME (tps65010_driver.name)
+#define DRIVER_NAME (tps65010_driver.driver.name)
MODULE_DESCRIPTION("TPS6501x Power Management Driver");
MODULE_LICENSE("GPL");
static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END };
-static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
@@ -100,7 +99,7 @@ struct tps65010 {
/* not currently tracking GPIO state */
};
-#define POWER_POLL_DELAY msecs_to_jiffies(800)
+#define POWER_POLL_DELAY msecs_to_jiffies(5000)
/*-------------------------------------------------------------------------*/
@@ -520,8 +519,11 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
goto fail1;
}
+ /* the IRQ is active low, but many gpio lines can't support that
+ * so this driver can use falling-edge triggers instead.
+ */
+ irqflags = IRQF_SAMPLE_RANDOM;
#ifdef CONFIG_ARM
- irqflags = IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_LOW;
if (machine_is_omap_h2()) {
tps->model = TPS65010;
omap_cfg_reg(W4_GPIO58);
@@ -543,8 +545,6 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
// FIXME set up this board's IRQ ...
}
-#else
- irqflags = IRQF_SAMPLE_RANDOM;
#endif
if (tps->irq > 0) {
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index d4bad6704bb..448df277337 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3552,6 +3552,8 @@ static int ohci1394_pci_resume (struct pci_dev *pdev)
static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
+ pci_save_state(pdev);
+
#ifdef CONFIG_PPC_PMAC
if (machine_is(powermac)) {
struct device_node *of_node;
@@ -3563,8 +3565,6 @@ static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
}
#endif
- pci_save_state(pdev);
-
return 0;
}
diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c
index e05ca2cdc73..75313ade2e0 100644
--- a/drivers/infiniband/core/cache.c
+++ b/drivers/infiniband/core/cache.c
@@ -301,7 +301,8 @@ static void ib_cache_event(struct ib_event_handler *handler,
event->event == IB_EVENT_PORT_ACTIVE ||
event->event == IB_EVENT_LID_CHANGE ||
event->event == IB_EVENT_PKEY_CHANGE ||
- event->event == IB_EVENT_SM_CHANGE) {
+ event->event == IB_EVENT_SM_CHANGE ||
+ event->event == IB_EVENT_CLIENT_REREGISTER) {
work = kmalloc(sizeof *work, GFP_ATOMIC);
if (work) {
INIT_WORK(&work->work, ib_cache_task, work);
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index aeda484ffd8..d6b84226bba 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -405,7 +405,8 @@ static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event
event->event == IB_EVENT_PORT_ACTIVE ||
event->event == IB_EVENT_LID_CHANGE ||
event->event == IB_EVENT_PKEY_CHANGE ||
- event->event == IB_EVENT_SM_CHANGE) {
+ event->event == IB_EVENT_SM_CHANGE ||
+ event->event == IB_EVENT_CLIENT_REREGISTER) {
struct ib_sa_device *sa_dev;
sa_dev = container_of(handler, typeof(*sa_dev), event_handler);
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 557cde3a456..7b82c1907f0 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -967,12 +967,12 @@ static struct {
} mthca_hca_table[] = {
[TAVOR] = { .latest_fw = MTHCA_FW_VER(3, 4, 0),
.flags = 0 },
- [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 400),
+ [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 7, 600),
.flags = MTHCA_FLAG_PCIE },
- [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 0),
+ [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 1, 400),
.flags = MTHCA_FLAG_MEMFREE |
MTHCA_FLAG_PCIE },
- [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 0, 800),
+ [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 1, 0),
.flags = MTHCA_FLAG_MEMFREE |
MTHCA_FLAG_PCIE |
MTHCA_FLAG_SINAI_OPT }
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 230ae21db8f..265b1d1c4a6 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -1287,11 +1287,7 @@ int mthca_register_device(struct mthca_dev *dev)
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
(1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
(1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
- (1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
- (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
- (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
- (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ);
+ (1ull << IB_USER_VERBS_CMD_DETACH_MCAST);
dev->ib_dev.node_type = IB_NODE_CA;
dev->ib_dev.phys_port_cnt = dev->limits.num_ports;
dev->ib_dev.dma_device = &dev->pdev->dev;
@@ -1316,6 +1312,11 @@ int mthca_register_device(struct mthca_dev *dev)
dev->ib_dev.modify_srq = mthca_modify_srq;
dev->ib_dev.query_srq = mthca_query_srq;
dev->ib_dev.destroy_srq = mthca_destroy_srq;
+ dev->ib_dev.uverbs_cmd_mask |=
+ (1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
+ (1ull << IB_USER_VERBS_CMD_DESTROY_SRQ);
if (mthca_is_memfree(dev))
dev->ib_dev.post_srq_recv = mthca_arbel_post_srq_recv;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h
index 8de2887ba15..9a5bece3fa5 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.h
+++ b/drivers/infiniband/hw/mthca/mthca_provider.h
@@ -136,8 +136,8 @@ struct mthca_ah {
* We have one global lock that protects dev->cq/qp_table. Each
* struct mthca_cq/qp also has its own lock. An individual qp lock
* may be taken inside of an individual cq lock. Both cqs attached to
- * a qp may be locked, with the send cq locked first. No other
- * nesting should be done.
+ * a qp may be locked, with the cq with the lower cqn locked first.
+ * No other nesting should be done.
*
* Each struct mthca_cq/qp also has an ref count, protected by the
* corresponding table lock. The pointer from the cq/qp_table to the
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index cd8b6721ac9..2e8f6f36e0a 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -99,6 +99,10 @@ enum {
MTHCA_QP_BIT_RSC = 1 << 3
};
+enum {
+ MTHCA_SEND_DOORBELL_FENCE = 1 << 5
+};
+
struct mthca_qp_path {
__be32 port_pkey;
u8 rnr_retry;
@@ -1259,6 +1263,32 @@ int mthca_alloc_qp(struct mthca_dev *dev,
return 0;
}
+static void mthca_lock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq)
+{
+ if (send_cq == recv_cq)
+ spin_lock_irq(&send_cq->lock);
+ else if (send_cq->cqn < recv_cq->cqn) {
+ spin_lock_irq(&send_cq->lock);
+ spin_lock_nested(&recv_cq->lock, SINGLE_DEPTH_NESTING);
+ } else {
+ spin_lock_irq(&recv_cq->lock);
+ spin_lock_nested(&send_cq->lock, SINGLE_DEPTH_NESTING);
+ }
+}
+
+static void mthca_unlock_cqs(struct mthca_cq *send_cq, struct mthca_cq *recv_cq)
+{
+ if (send_cq == recv_cq)
+ spin_unlock_irq(&send_cq->lock);
+ else if (send_cq->cqn < recv_cq->cqn) {
+ spin_unlock(&recv_cq->lock);
+ spin_unlock_irq(&send_cq->lock);
+ } else {
+ spin_unlock(&send_cq->lock);
+ spin_unlock_irq(&recv_cq->lock);
+ }
+}
+
int mthca_alloc_sqp(struct mthca_dev *dev,
struct mthca_pd *pd,
struct mthca_cq *send_cq,
@@ -1311,17 +1341,13 @@ int mthca_alloc_sqp(struct mthca_dev *dev,
* Lock CQs here, so that CQ polling code can do QP lookup
* without taking a lock.
*/
- spin_lock_irq(&send_cq->lock);
- if (send_cq != recv_cq)
- spin_lock(&recv_cq->lock);
+ mthca_lock_cqs(send_cq, recv_cq);
spin_lock(&dev->qp_table.lock);
mthca_array_clear(&dev->qp_table.qp, mqpn);
spin_unlock(&dev->qp_table.lock);
- if (send_cq != recv_cq)
- spin_unlock(&recv_cq->lock);
- spin_unlock_irq(&send_cq->lock);
+ mthca_unlock_cqs(send_cq, recv_cq);
err_out:
dma_free_coherent(&dev->pdev->dev, sqp->header_buf_size,
@@ -1355,9 +1381,7 @@ void mthca_free_qp(struct mthca_dev *dev,
* Lock CQs here, so that CQ polling code can do QP lookup
* without taking a lock.
*/
- spin_lock_irq(&send_cq->lock);
- if (send_cq != recv_cq)
- spin_lock(&recv_cq->lock);
+ mthca_lock_cqs(send_cq, recv_cq);
spin_lock(&dev->qp_table.lock);
mthca_array_clear(&dev->qp_table.qp,
@@ -1365,9 +1389,7 @@ void mthca_free_qp(struct mthca_dev *dev,
--qp->refcount;
spin_unlock(&dev->qp_table.lock);
- if (send_cq != recv_cq)
- spin_unlock(&recv_cq->lock);
- spin_unlock_irq(&send_cq->lock);
+ mthca_unlock_cqs(send_cq, recv_cq);
wait_event(qp->wait, !get_qp_refcount(dev, qp));
@@ -1502,7 +1524,7 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
int i;
int size;
int size0 = 0;
- u32 f0 = 0;
+ u32 f0;
int ind;
u8 op0 = 0;
@@ -1686,6 +1708,8 @@ int mthca_tavor_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
if (!size0) {
size0 = size;
op0 = mthca_opcode[wr->opcode];
+ f0 = wr->send_flags & IB_SEND_FENCE ?
+ MTHCA_SEND_DOORBELL_FENCE : 0;
}
++ind;
@@ -1843,7 +1867,7 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
int i;
int size;
int size0 = 0;
- u32 f0 = 0;
+ u32 f0;
int ind;
u8 op0 = 0;
@@ -2051,6 +2075,8 @@ int mthca_arbel_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
if (!size0) {
size0 = size;
op0 = mthca_opcode[wr->opcode];
+ f0 = wr->send_flags & IB_SEND_FENCE ?
+ MTHCA_SEND_DOORBELL_FENCE : 0;
}
++ind;
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 34b0da5cfa0..1437d7ee3b1 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -378,21 +378,6 @@ iscsi_iser_conn_start(struct iscsi_cls_conn *cls_conn)
return iser_conn_set_full_featured_mode(conn);
}
-static void
-iscsi_iser_conn_terminate(struct iscsi_conn *conn)
-{
- struct iscsi_iser_conn *iser_conn = conn->dd_data;
- struct iser_conn *ib_conn = iser_conn->ib_conn;
-
- BUG_ON(!ib_conn);
- /* starts conn teardown process, waits until all previously *
- * posted buffers get flushed, deallocates all conn resources */
- iser_conn_terminate(ib_conn);
- iser_conn->ib_conn = NULL;
- conn->recv_lock = NULL;
-}
-
-
static struct iscsi_transport iscsi_iser_transport;
static struct iscsi_cls_session *
@@ -555,13 +540,13 @@ iscsi_iser_ep_poll(__u64 ep_handle, int timeout_ms)
static void
iscsi_iser_ep_disconnect(__u64 ep_handle)
{
- struct iser_conn *ib_conn = iscsi_iser_ib_conn_lookup(ep_handle);
+ struct iser_conn *ib_conn;
+ ib_conn = iscsi_iser_ib_conn_lookup(ep_handle);
if (!ib_conn)
return;
iser_err("ib conn %p state %d\n",ib_conn, ib_conn->state);
-
iser_conn_terminate(ib_conn);
}
@@ -614,9 +599,6 @@ static struct iscsi_transport iscsi_iser_transport = {
.get_session_param = iscsi_session_get_param,
.start_conn = iscsi_iser_conn_start,
.stop_conn = iscsi_conn_stop,
- /* these are called as part of conn recovery */
- .suspend_conn_recv = NULL, /* FIXME is/how this relvant to iser? */
- .terminate_conn = iscsi_iser_conn_terminate,
/* IO */
.send_pdu = iscsi_conn_send_pdu,
.get_stats = iscsi_iser_conn_get_stats,
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 6bfa0cf4b1d..a86afd0a5ef 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -498,7 +498,7 @@ static int atkbd_set_repeat_rate(struct atkbd *atkbd)
i++;
dev->rep[REP_PERIOD] = period[i];
- while (j < ARRAY_SIZE(period) - 1 && delay[j] < dev->rep[REP_DELAY])
+ while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY])
j++;
dev->rep[REP_DELAY] = delay[j];
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index a8efc1af36c..de0f46dd969 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -259,11 +259,11 @@ static int __init dmi_matched(struct dmi_system_id *dmi)
return 1;
}
-static struct key_entry keymap_empty[] __initdata = {
+static struct key_entry keymap_empty[] = {
{ KE_END, 0 }
};
-static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = {
+static struct key_entry keymap_fs_amilo_pro_v2000[] = {
{ KE_KEY, 0x01, KEY_HELP },
{ KE_KEY, 0x11, KEY_PROG1 },
{ KE_KEY, 0x12, KEY_PROG2 },
@@ -273,7 +273,7 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] __initdata = {
{ KE_END, 0 }
};
-static struct key_entry keymap_fujitsu_n3510[] __initdata = {
+static struct key_entry keymap_fujitsu_n3510[] = {
{ KE_KEY, 0x11, KEY_PROG1 },
{ KE_KEY, 0x12, KEY_PROG2 },
{ KE_KEY, 0x36, KEY_WWW },
@@ -285,7 +285,7 @@ static struct key_entry keymap_fujitsu_n3510[] __initdata = {
{ KE_END, 0 }
};
-static struct key_entry keymap_wistron_ms2111[] __initdata = {
+static struct key_entry keymap_wistron_ms2111[] = {
{ KE_KEY, 0x11, KEY_PROG1 },
{ KE_KEY, 0x12, KEY_PROG2 },
{ KE_KEY, 0x13, KEY_PROG3 },
@@ -294,7 +294,7 @@ static struct key_entry keymap_wistron_ms2111[] __initdata = {
{ KE_END, 0 }
};
-static struct key_entry keymap_wistron_ms2141[] __initdata = {
+static struct key_entry keymap_wistron_ms2141[] = {
{ KE_KEY, 0x11, KEY_PROG1 },
{ KE_KEY, 0x12, KEY_PROG2 },
{ KE_WIFI, 0x30, 0 },
@@ -307,7 +307,7 @@ static struct key_entry keymap_wistron_ms2141[] __initdata = {
{ KE_END, 0 }
};
-static struct key_entry keymap_acer_aspire_1500[] __initdata = {
+static struct key_entry keymap_acer_aspire_1500[] = {
{ KE_KEY, 0x11, KEY_PROG1 },
{ KE_KEY, 0x12, KEY_PROG2 },
{ KE_WIFI, 0x30, 0 },
@@ -317,7 +317,7 @@ static struct key_entry keymap_acer_aspire_1500[] __initdata = {
{ KE_END, 0 }
};
-static struct key_entry keymap_acer_travelmate_240[] __initdata = {
+static struct key_entry keymap_acer_travelmate_240[] = {
{ KE_KEY, 0x31, KEY_MAIL },
{ KE_KEY, 0x36, KEY_WWW },
{ KE_KEY, 0x11, KEY_PROG1 },
@@ -327,7 +327,7 @@ static struct key_entry keymap_acer_travelmate_240[] __initdata = {
{ KE_END, 0 }
};
-static struct key_entry keymap_aopen_1559as[] __initdata = {
+static struct key_entry keymap_aopen_1559as[] = {
{ KE_KEY, 0x01, KEY_HELP },
{ KE_KEY, 0x06, KEY_PROG3 },
{ KE_KEY, 0x11, KEY_PROG1 },
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 8bc9f51ae6c..343afa38f4c 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -485,13 +485,6 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties)
param[0] = 40;
ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
- param[0] = 200;
- ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
- param[0] = 200;
- ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
- param[0] = 60;
- ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
-
if (set_properties) {
set_bit(BTN_MIDDLE, psmouse->dev->keybit);
set_bit(REL_WHEEL, psmouse->dev->relbit);
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index be48cedf986..c54de989eb0 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -255,7 +255,9 @@ static struct region *__rh_alloc(struct region_hash *rh, region_t region)
struct region *reg, *nreg;
read_unlock(&rh->hash_lock);
- nreg = mempool_alloc(rh->region_pool, GFP_NOIO);
+ nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC);
+ if (unlikely(!nreg))
+ nreg = kmalloc(sizeof(struct region), GFP_NOIO);
nreg->state = rh->log->type->in_sync(rh->log, region, 1) ?
RH_CLEAN : RH_NOSYNC;
nreg->rh = rh;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b6d16022a53..8dbab2ef388 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1597,6 +1597,19 @@ void md_update_sb(mddev_t * mddev)
repeat:
spin_lock_irq(&mddev->write_lock);
+
+ if (mddev->degraded && mddev->sb_dirty == 3)
+ /* If the array is degraded, then skipping spares is both
+ * dangerous and fairly pointless.
+ * Dangerous because a device that was removed from the array
+ * might have a event_count that still looks up-to-date,
+ * so it can be re-added without a resync.
+ * Pointless because if there are any spares to skip,
+ * then a recovery will happen and soon that array won't
+ * be degraded any more and the spare can go back to sleep then.
+ */
+ mddev->sb_dirty = 1;
+
sync_req = mddev->in_sync;
mddev->utime = get_seconds();
if (mddev->sb_dirty == 3)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 1efe22a2d04..87bfe9e7d8c 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1625,15 +1625,16 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
return 0;
}
- /* before building a request, check if we can skip these blocks..
- * This call the bitmap_start_sync doesn't actually record anything
- */
if (mddev->bitmap == NULL &&
mddev->recovery_cp == MaxSector &&
+ !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
conf->fullsync == 0) {
*skipped = 1;
return max_sector - sector_nr;
}
+ /* before building a request, check if we can skip these blocks..
+ * This call the bitmap_start_sync doesn't actually record anything
+ */
if (!bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) &&
!conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* We can skip this block, and probably several more */
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index d4cb144ab40..c537d71c18e 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -640,7 +640,6 @@ typedef struct _MPT_ADAPTER
struct work_struct fc_setup_reset_work;
struct list_head fc_rports;
spinlock_t fc_rescan_work_lock;
- int fc_rescan_work_count;
struct work_struct fc_rescan_work;
char fc_rescan_work_q_name[KOBJ_NAME_LEN];
struct workqueue_struct *fc_rescan_work_q;
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 90da7d63b08..85696f34c31 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -669,7 +669,10 @@ mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
* if still doing discovery,
* hang loose a while until finished
*/
- if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
+ if ((pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) ||
+ (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_ONLINE &&
+ (pp0dest->Flags & MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK)
+ == MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT)) {
if (count-- > 0) {
msleep(100);
goto try_again;
@@ -895,59 +898,45 @@ mptfc_rescan_devices(void *arg)
{
MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
int ii;
- int work_to_do;
u64 pn;
- unsigned long flags;
struct mptfc_rport_info *ri;
- do {
- /* start by tagging all ports as missing */
- list_for_each_entry(ri, &ioc->fc_rports, list) {
- if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) {
- ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING;
- }
+ /* start by tagging all ports as missing */
+ list_for_each_entry(ri, &ioc->fc_rports, list) {
+ if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) {
+ ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING;
}
+ }
- /*
- * now rescan devices known to adapter,
- * will reregister existing rports
- */
- for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
- (void) mptfc_GetFcPortPage0(ioc, ii);
- mptfc_init_host_attr(ioc,ii); /* refresh */
- mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev);
- }
+ /*
+ * now rescan devices known to adapter,
+ * will reregister existing rports
+ */
+ for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
+ (void) mptfc_GetFcPortPage0(ioc, ii);
+ mptfc_init_host_attr(ioc, ii); /* refresh */
+ mptfc_GetFcDevPage0(ioc, ii, mptfc_register_dev);
+ }
- /* delete devices still missing */
- list_for_each_entry(ri, &ioc->fc_rports, list) {
- /* if newly missing, delete it */
- if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) {
+ /* delete devices still missing */
+ list_for_each_entry(ri, &ioc->fc_rports, list) {
+ /* if newly missing, delete it */
+ if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) {
- ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
- MPT_RPORT_INFO_FLAGS_MISSING);
- fc_remote_port_delete(ri->rport); /* won't sleep */
- ri->rport = NULL;
+ ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
+ MPT_RPORT_INFO_FLAGS_MISSING);
+ fc_remote_port_delete(ri->rport); /* won't sleep */
+ ri->rport = NULL;
- pn = (u64)ri->pg0.WWPN.High << 32 |
- (u64)ri->pg0.WWPN.Low;
- dfcprintk ((MYIOC_s_INFO_FMT
- "mptfc_rescan.%d: %llx deleted\n",
- ioc->name,
- ioc->sh->host_no,
- (unsigned long long)pn));
- }
+ pn = (u64)ri->pg0.WWPN.High << 32 |
+ (u64)ri->pg0.WWPN.Low;
+ dfcprintk ((MYIOC_s_INFO_FMT
+ "mptfc_rescan.%d: %llx deleted\n",
+ ioc->name,
+ ioc->sh->host_no,
+ (unsigned long long)pn));
}
-
- /*
- * allow multiple passes as target state
- * might have changed during scan
- */
- spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
- if (ioc->fc_rescan_work_count > 2) /* only need one more */
- ioc->fc_rescan_work_count = 2;
- work_to_do = --ioc->fc_rescan_work_count;
- spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
- } while (work_to_do);
+ }
}
static int
@@ -1159,7 +1148,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* by doing it via the workqueue, some locking is eliminated
*/
- ioc->fc_rescan_work_count = 1;
queue_work(ioc->fc_rescan_work_q, &ioc->fc_rescan_work);
flush_workqueue(ioc->fc_rescan_work_q);
@@ -1202,10 +1190,8 @@ mptfc_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
case MPI_EVENT_RESCAN:
spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
if (ioc->fc_rescan_work_q) {
- if (ioc->fc_rescan_work_count++ == 0) {
- queue_work(ioc->fc_rescan_work_q,
- &ioc->fc_rescan_work);
- }
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
}
spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
break;
@@ -1248,10 +1234,8 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
mptfc_SetFcPortPage1_defaults(ioc);
spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
if (ioc->fc_rescan_work_q) {
- if (ioc->fc_rescan_work_count++ == 0) {
- queue_work(ioc->fc_rescan_work_q,
- &ioc->fc_rescan_work);
- }
+ queue_work(ioc->fc_rescan_work_q,
+ &ioc->fc_rescan_work);
}
spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
}
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index d7897dc6b3c..a0ba07c36ee 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -130,11 +130,13 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
if (ctrl & NAND_CTRL_CHANGE) {
unsigned long bits;
- bits = (~ctrl & NAND_NCE) << 2;
- bits |= (ctrl & NAND_CLE) << 7;
- bits |= (ctrl & NAND_ALE) << 6;
+ bits = (~ctrl & NAND_NCE) ? AMS_DELTA_LATCH2_NAND_NCE : 0;
+ bits |= (ctrl & NAND_CLE) ? AMS_DELTA_LATCH2_NAND_CLE : 0;
+ bits |= (ctrl & NAND_ALE) ? AMS_DELTA_LATCH2_NAND_ALE : 0;
- ams_delta_latch2_write(0xC2, bits);
+ ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE |
+ AMS_DELTA_LATCH2_NAND_ALE |
+ AMS_DELTA_LATCH2_NAND_NCE, bits);
}
if (cmd != NAND_CMD_NONE)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 62b861304e0..c8cbc00243f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1093,9 +1093,10 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
ret = nand_do_read_ops(mtd, from, &chip->ops);
+ *retlen = chip->ops.retlen;
+
nand_release_device(mtd);
- *retlen = chip->ops.retlen;
return ret;
}
@@ -1691,9 +1692,10 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
ret = nand_do_write_ops(mtd, to, &chip->ops);
+ *retlen = chip->ops.retlen;
+
nand_release_device(mtd);
- *retlen = chip->ops.retlen;
return ret;
}
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 3c148eaf2f4..8a60f391ffc 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -76,7 +76,7 @@ config HOTPLUG_PCI_IBM
config HOTPLUG_PCI_ACPI
tristate "ACPI PCI Hotplug driver"
- depends on ACPI_DOCK && HOTPLUG_PCI
+ depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI)
help
Say Y here if you have a system that supports PCI Hotplug using
ACPI.
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 02be74caa89..4afcaffd031 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -254,8 +254,8 @@ int cpci_led_off(struct slot* slot)
int cpci_configure_slot(struct slot* slot)
{
- unsigned char busnr;
- struct pci_bus *child;
+ struct pci_bus *parent;
+ int fn;
dbg("%s - enter", __FUNCTION__);
@@ -276,23 +276,53 @@ int cpci_configure_slot(struct slot* slot)
*/
n = pci_scan_slot(slot->bus, slot->devfn);
dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n);
- if (n > 0)
- pci_bus_add_devices(slot->bus);
slot->dev = pci_get_slot(slot->bus, slot->devfn);
if (slot->dev == NULL) {
err("Could not find PCI device for slot %02x", slot->number);
- return 1;
+ return -ENODEV;
}
}
-
- if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr);
- child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr);
- pci_do_scan_bus(child);
- pci_bus_size_bridges(child);
+ parent = slot->dev->bus;
+
+ for (fn = 0; fn < 8; fn++) {
+ struct pci_dev *dev;
+
+ dev = pci_get_slot(parent, PCI_DEVFN(PCI_SLOT(slot->devfn), fn));
+ if (!dev)
+ continue;
+ if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
+ (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
+ /* Find an unused bus number for the new bridge */
+ struct pci_bus *child;
+ unsigned char busnr, start = parent->secondary;
+ unsigned char end = parent->subordinate;
+
+ for (busnr = start; busnr <= end; busnr++) {
+ if (!pci_find_bus(pci_domain_nr(parent),
+ busnr))
+ break;
+ }
+ if (busnr >= end) {
+ err("No free bus for hot-added bridge\n");
+ pci_dev_put(dev);
+ continue;
+ }
+ child = pci_add_new_bus(parent, dev, busnr);
+ if (!child) {
+ err("Cannot add new bus for %s\n",
+ pci_name(dev));
+ pci_dev_put(dev);
+ continue;
+ }
+ child->subordinate = pci_do_scan_bus(child);
+ pci_bus_size_bridges(child);
+ }
+ pci_dev_put(dev);
}
- pci_bus_assign_resources(slot->dev->bus);
+ pci_bus_assign_resources(parent);
+ pci_bus_add_devices(parent);
+ pci_enable_bridges(parent);
dbg("%s - exit", __FUNCTION__);
return 0;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 10e1a905c14..474e9cd0e9e 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -139,9 +139,8 @@ const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
/**
* pci_match_device - Tell if a PCI device structure has a matching
* PCI device id structure
- * @ids: array of PCI device id structures to search in
- * @dev: the PCI device structure to match against
* @drv: the PCI driver to match against
+ * @dev: the PCI device structure to match against
*
* Used by a driver to check whether a PCI device present in the
* system is in its list of supported devices. Returns the matching
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index fb08bc951ac..73177429fe7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -438,6 +438,7 @@ static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev)
pci_read_config_dword(dev, 0x48, &region);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO");
}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi );
/*
@@ -1091,7 +1092,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asu
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc );
static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
{
@@ -1518,6 +1518,63 @@ static void __devinit quirk_netmos(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
+static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
+{
+ u16 command;
+ u32 bar;
+ u8 __iomem *csr;
+ u8 cmd_hi;
+
+ switch (dev->device) {
+ /* PCI IDs taken from drivers/net/e100.c */
+ case 0x1029:
+ case 0x1030 ... 0x1034:
+ case 0x1038 ... 0x103E:
+ case 0x1050 ... 0x1057:
+ case 0x1059:
+ case 0x1064 ... 0x106B:
+ case 0x1091 ... 0x1095:
+ case 0x1209:
+ case 0x1229:
+ case 0x2449:
+ case 0x2459:
+ case 0x245D:
+ case 0x27DC:
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * Some firmware hands off the e100 with interrupts enabled,
+ * which can cause a flood of interrupts if packets are
+ * received before the driver attaches to the device. So
+ * disable all e100 interrupts here. The driver will
+ * re-enable them when it's ready.
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar);
+
+ if (!(command & PCI_COMMAND_MEMORY) || !bar)
+ return;
+
+ csr = ioremap(bar, 8);
+ if (!csr) {
+ printk(KERN_WARNING "PCI: Can't map %s e100 registers\n",
+ pci_name(dev));
+ return;
+ }
+
+ cmd_hi = readb(csr + 3);
+ if (cmd_hi == 0) {
+ printk(KERN_WARNING "PCI: Firmware left %s e100 interrupts "
+ "enabled, disabling\n", pci_name(dev));
+ writeb(1, csr + 3);
+ }
+
+ iounmap(csr);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt);
static void __devinit fixup_rev1_53c810(struct pci_dev* dev)
{
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index d6d1bff52b8..2c7de79c83b 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -69,12 +69,12 @@ static void s3c_rtc_setaie(int to)
pr_debug("%s: aie=%d\n", __FUNCTION__, to);
- tmp = readb(S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
+ tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
if (to)
tmp |= S3C2410_RTCALM_ALMEN;
- writeb(tmp, S3C2410_RTCALM);
+ writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
}
static void s3c_rtc_setpie(int to)
@@ -84,12 +84,12 @@ static void s3c_rtc_setpie(int to)
pr_debug("%s: pie=%d\n", __FUNCTION__, to);
spin_lock_irq(&s3c_rtc_pie_lock);
- tmp = readb(S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE;
+ tmp = readb(s3c_rtc_base + S3C2410_TICNT) & ~S3C2410_TICNT_ENABLE;
if (to)
tmp |= S3C2410_TICNT_ENABLE;
- writeb(tmp, S3C2410_TICNT);
+ writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
}
@@ -98,13 +98,13 @@ static void s3c_rtc_setfreq(int freq)
unsigned int tmp;
spin_lock_irq(&s3c_rtc_pie_lock);
- tmp = readb(S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
+ tmp = readb(s3c_rtc_base + S3C2410_TICNT) & S3C2410_TICNT_ENABLE;
s3c_rtc_freq = freq;
tmp |= (128 / freq)-1;
- writeb(tmp, S3C2410_TICNT);
+ writeb(tmp, s3c_rtc_base + S3C2410_TICNT);
spin_unlock_irq(&s3c_rtc_pie_lock);
}
@@ -113,14 +113,15 @@ static void s3c_rtc_setfreq(int freq)
static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
{
unsigned int have_retried = 0;
+ void __iomem *base = s3c_rtc_base;
retry_get_time:
- rtc_tm->tm_min = readb(S3C2410_RTCMIN);
- rtc_tm->tm_hour = readb(S3C2410_RTCHOUR);
- rtc_tm->tm_mday = readb(S3C2410_RTCDATE);
- rtc_tm->tm_mon = readb(S3C2410_RTCMON);
- rtc_tm->tm_year = readb(S3C2410_RTCYEAR);
- rtc_tm->tm_sec = readb(S3C2410_RTCSEC);
+ rtc_tm->tm_min = readb(base + S3C2410_RTCMIN);
+ rtc_tm->tm_hour = readb(base + S3C2410_RTCHOUR);
+ rtc_tm->tm_mday = readb(base + S3C2410_RTCDATE);
+ rtc_tm->tm_mon = readb(base + S3C2410_RTCMON);
+ rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
+ rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
/* the only way to work out wether the system was mid-update
* when we read it is to check the second counter, and if it
@@ -151,17 +152,26 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
{
- /* the rtc gets round the y2k problem by just not supporting it */
+ void __iomem *base = s3c_rtc_base;
+ int year = tm->tm_year - 100;
- if (tm->tm_year < 100)
+ pr_debug("set time %02d.%02d.%02d %02d/%02d/%02d\n",
+ tm->tm_year, tm->tm_mon, tm->tm_mday,
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+ /* we get around y2k by simply not supporting it */
+
+ if (year < 0 || year >= 100) {
+ dev_err(dev, "rtc only supports 100 years\n");
return -EINVAL;
+ }
- writeb(BIN2BCD(tm->tm_sec), S3C2410_RTCSEC);
- writeb(BIN2BCD(tm->tm_min), S3C2410_RTCMIN);
- writeb(BIN2BCD(tm->tm_hour), S3C2410_RTCHOUR);
- writeb(BIN2BCD(tm->tm_mday), S3C2410_RTCDATE);
- writeb(BIN2BCD(tm->tm_mon + 1), S3C2410_RTCMON);
- writeb(BIN2BCD(tm->tm_year - 100), S3C2410_RTCYEAR);
+ writeb(BIN2BCD(tm->tm_sec), base + S3C2410_RTCSEC);
+ writeb(BIN2BCD(tm->tm_min), base + S3C2410_RTCMIN);
+ writeb(BIN2BCD(tm->tm_hour), base + S3C2410_RTCHOUR);
+ writeb(BIN2BCD(tm->tm_mday), base + S3C2410_RTCDATE);
+ writeb(BIN2BCD(tm->tm_mon + 1), base + S3C2410_RTCMON);
+ writeb(BIN2BCD(year), base + S3C2410_RTCYEAR);
return 0;
}
@@ -169,16 +179,17 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rtc_time *alm_tm = &alrm->time;
+ void __iomem *base = s3c_rtc_base;
unsigned int alm_en;
- alm_tm->tm_sec = readb(S3C2410_ALMSEC);
- alm_tm->tm_min = readb(S3C2410_ALMMIN);
- alm_tm->tm_hour = readb(S3C2410_ALMHOUR);
- alm_tm->tm_mon = readb(S3C2410_ALMMON);
- alm_tm->tm_mday = readb(S3C2410_ALMDATE);
- alm_tm->tm_year = readb(S3C2410_ALMYEAR);
+ alm_tm->tm_sec = readb(base + S3C2410_ALMSEC);
+ alm_tm->tm_min = readb(base + S3C2410_ALMMIN);
+ alm_tm->tm_hour = readb(base + S3C2410_ALMHOUR);
+ alm_tm->tm_mon = readb(base + S3C2410_ALMMON);
+ alm_tm->tm_mday = readb(base + S3C2410_ALMDATE);
+ alm_tm->tm_year = readb(base + S3C2410_ALMYEAR);
- alm_en = readb(S3C2410_RTCALM);
+ alm_en = readb(base + S3C2410_RTCALM);
pr_debug("read alarm %02x %02x.%02x.%02x %02x/%02x/%02x\n",
alm_en,
@@ -226,6 +237,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct rtc_time *tm = &alrm->time;
+ void __iomem *base = s3c_rtc_base;
unsigned int alrm_en;
pr_debug("s3c_rtc_setalarm: %d, %02x/%02x/%02x %02x.%02x.%02x\n",
@@ -234,32 +246,32 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
tm->tm_hour & 0xff, tm->tm_min & 0xff, tm->tm_sec);
- alrm_en = readb(S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
- writeb(0x00, S3C2410_RTCALM);
+ alrm_en = readb(base + S3C2410_RTCALM) & S3C2410_RTCALM_ALMEN;
+ writeb(0x00, base + S3C2410_RTCALM);
if (tm->tm_sec < 60 && tm->tm_sec >= 0) {
alrm_en |= S3C2410_RTCALM_SECEN;
- writeb(BIN2BCD(tm->tm_sec), S3C2410_ALMSEC);
+ writeb(BIN2BCD(tm->tm_sec), base + S3C2410_ALMSEC);
}
if (tm->tm_min < 60 && tm->tm_min >= 0) {
alrm_en |= S3C2410_RTCALM_MINEN;
- writeb(BIN2BCD(tm->tm_min), S3C2410_ALMMIN);
+ writeb(BIN2BCD(tm->tm_min), base + S3C2410_ALMMIN);
}
if (tm->tm_hour < 24 && tm->tm_hour >= 0) {
alrm_en |= S3C2410_RTCALM_HOUREN;
- writeb(BIN2BCD(tm->tm_hour), S3C2410_ALMHOUR);
+ writeb(BIN2BCD(tm->tm_hour), base + S3C2410_ALMHOUR);
}
pr_debug("setting S3C2410_RTCALM to %08x\n", alrm_en);
- writeb(alrm_en, S3C2410_RTCALM);
+ writeb(alrm_en, base + S3C2410_RTCALM);
if (0) {
- alrm_en = readb(S3C2410_RTCALM);
+ alrm_en = readb(base + S3C2410_RTCALM);
alrm_en &= ~S3C2410_RTCALM_ALMEN;
- writeb(alrm_en, S3C2410_RTCALM);
+ writeb(alrm_en, base + S3C2410_RTCALM);
disable_irq_wake(s3c_rtc_alarmno);
}
@@ -319,8 +331,8 @@ static int s3c_rtc_ioctl(struct device *dev,
static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
{
- unsigned int rtcalm = readb(S3C2410_RTCALM);
- unsigned int ticnt = readb (S3C2410_TICNT);
+ unsigned int rtcalm = readb(s3c_rtc_base + S3C2410_RTCALM);
+ unsigned int ticnt = readb(s3c_rtc_base + S3C2410_TICNT);
seq_printf(seq, "alarm_IRQ\t: %s\n",
(rtcalm & S3C2410_RTCALM_ALMEN) ? "yes" : "no" );
@@ -387,39 +399,40 @@ static struct rtc_class_ops s3c_rtcops = {
static void s3c_rtc_enable(struct platform_device *pdev, int en)
{
+ void __iomem *base = s3c_rtc_base;
unsigned int tmp;
if (s3c_rtc_base == NULL)
return;
if (!en) {
- tmp = readb(S3C2410_RTCCON);
- writeb(tmp & ~S3C2410_RTCCON_RTCEN, S3C2410_RTCCON);
+ tmp = readb(base + S3C2410_RTCCON);
+ writeb(tmp & ~S3C2410_RTCCON_RTCEN, base + S3C2410_RTCCON);
- tmp = readb(S3C2410_TICNT);
- writeb(tmp & ~S3C2410_TICNT_ENABLE, S3C2410_TICNT);
+ tmp = readb(base + S3C2410_TICNT);
+ writeb(tmp & ~S3C2410_TICNT_ENABLE, base + S3C2410_TICNT);
} else {
/* re-enable the device, and check it is ok */
- if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){
+ if ((readb(base+S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0){
dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
- tmp = readb(S3C2410_RTCCON);
- writeb(tmp | S3C2410_RTCCON_RTCEN , S3C2410_RTCCON);
+ tmp = readb(base + S3C2410_RTCCON);
+ writeb(tmp|S3C2410_RTCCON_RTCEN, base+S3C2410_RTCCON);
}
- if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){
+ if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)){
dev_info(&pdev->dev, "removing RTCCON_CNTSEL\n");
- tmp = readb(S3C2410_RTCCON);
- writeb(tmp& ~S3C2410_RTCCON_CNTSEL , S3C2410_RTCCON);
+ tmp = readb(base + S3C2410_RTCCON);
+ writeb(tmp& ~S3C2410_RTCCON_CNTSEL, base+S3C2410_RTCCON);
}
- if ((readb(S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){
+ if ((readb(base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)){
dev_info(&pdev->dev, "removing RTCCON_CLKRST\n");
- tmp = readb(S3C2410_RTCCON);
- writeb(tmp & ~S3C2410_RTCCON_CLKRST, S3C2410_RTCCON);
+ tmp = readb(base + S3C2410_RTCCON);
+ writeb(tmp & ~S3C2410_RTCCON_CLKRST, base+S3C2410_RTCCON);
}
}
}
@@ -475,8 +488,8 @@ static int s3c_rtc_probe(struct platform_device *pdev)
}
s3c_rtc_mem = request_mem_region(res->start,
- res->end-res->start+1,
- pdev->name);
+ res->end-res->start+1,
+ pdev->name);
if (s3c_rtc_mem == NULL) {
dev_err(&pdev->dev, "failed to reserve memory region\n");
@@ -495,7 +508,8 @@ static int s3c_rtc_probe(struct platform_device *pdev)
s3c_rtc_enable(pdev, 1);
- pr_debug("s3c2410_rtc: RTCCON=%02x\n", readb(S3C2410_RTCCON));
+ pr_debug("s3c2410_rtc: RTCCON=%02x\n",
+ readb(s3c_rtc_base + S3C2410_RTCCON));
s3c_rtc_setfreq(s3c_rtc_freq);
@@ -543,7 +557,7 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
/* save TICNT for anyone using periodic interrupts */
- ticnt_save = readb(S3C2410_TICNT);
+ ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
/* calculate time delta for suspend */
@@ -567,7 +581,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
rtc_tm_to_time(&tm, &time.tv_sec);
restore_time_delta(&s3c_rtc_delta, &time);
- writeb(ticnt_save, S3C2410_TICNT);
+ writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
return 0;
}
#else
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 9d0c6e1a0e6..9af02c79ce8 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -54,11 +54,11 @@ struct dasd_devmap {
*/
struct dasd_server_ssid_map {
struct list_head list;
- struct server_id {
+ struct system_id {
char vendor[4];
char serial[15];
+ __u16 ssid;
} sid;
- __u16 ssid;
};
static struct list_head dasd_server_ssid_list;
@@ -904,14 +904,14 @@ dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
return -ENOMEM;
strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1);
strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1);
- srv->ssid = uid->ssid;
+ srv->sid.ssid = uid->ssid;
/* server is already contained ? */
spin_lock(&dasd_devmap_lock);
devmap->uid = *uid;
list_for_each_entry(tmp, &dasd_server_ssid_list, list) {
if (!memcmp(&srv->sid, &tmp->sid,
- sizeof(struct dasd_server_ssid_map))) {
+ sizeof(struct system_id))) {
kfree(srv);
srv = NULL;
break;
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 957ed5db98e..b7a7fac3f7c 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -607,7 +607,7 @@ dasd_eckd_psf_ssc(struct dasd_device *device)
* Valide storage server of current device.
*/
static int
-dasd_eckd_validate_server(struct dasd_device *device)
+dasd_eckd_validate_server(struct dasd_device *device, struct dasd_uid *uid)
{
int rc;
@@ -616,11 +616,11 @@ dasd_eckd_validate_server(struct dasd_device *device)
return 0;
rc = dasd_eckd_psf_ssc(device);
- if (rc)
- /* may be requested feature is not available on server,
- * therefore just report error and go ahead */
- DEV_MESSAGE(KERN_INFO, device,
- "Perform Subsystem Function returned rc=%d", rc);
+ /* may be requested feature is not available on server,
+ * therefore just report error and go ahead */
+ DEV_MESSAGE(KERN_INFO, device,
+ "PSF-SSC on storage subsystem %s.%s.%04x returned rc=%d",
+ uid->vendor, uid->serial, uid->ssid, rc);
/* RE-Read Configuration Data */
return dasd_eckd_read_conf(device);
}
@@ -666,7 +666,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
return rc;
rc = dasd_set_uid(device->cdev, &uid);
if (rc == 1) /* new server found */
- rc = dasd_eckd_validate_server(device);
+ rc = dasd_eckd_validate_server(device, &uid);
if (rc)
return rc;
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 9cd789b8acd..adc9d8f2c28 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -112,6 +112,105 @@ _zfcp_hex_dump(char *addr, int count)
printk("\n");
}
+
+/****************************************************************/
+/****** Functions to handle the request ID hash table ********/
+/****************************************************************/
+
+#define ZFCP_LOG_AREA ZFCP_LOG_AREA_FSF
+
+static int zfcp_reqlist_init(struct zfcp_adapter *adapter)
+{
+ int i;
+
+ adapter->req_list = kcalloc(REQUEST_LIST_SIZE, sizeof(struct list_head),
+ GFP_KERNEL);
+
+ if (!adapter->req_list)
+ return -ENOMEM;
+
+ for (i=0; i<REQUEST_LIST_SIZE; i++)
+ INIT_LIST_HEAD(&adapter->req_list[i]);
+
+ return 0;
+}
+
+static void zfcp_reqlist_free(struct zfcp_adapter *adapter)
+{
+ struct zfcp_fsf_req *request, *tmp;
+ unsigned int i;
+
+ for (i=0; i<REQUEST_LIST_SIZE; i++) {
+ if (list_empty(&adapter->req_list[i]))
+ continue;
+
+ list_for_each_entry_safe(request, tmp,
+ &adapter->req_list[i], list)
+ list_del(&request->list);
+ }
+
+ kfree(adapter->req_list);
+}
+
+void zfcp_reqlist_add(struct zfcp_adapter *adapter,
+ struct zfcp_fsf_req *fsf_req)
+{
+ unsigned int i;
+
+ i = fsf_req->req_id % REQUEST_LIST_SIZE;
+ list_add_tail(&fsf_req->list, &adapter->req_list[i]);
+}
+
+void zfcp_reqlist_remove(struct zfcp_adapter *adapter, unsigned long req_id)
+{
+ struct zfcp_fsf_req *request, *tmp;
+ unsigned int i, counter;
+ u64 dbg_tmp[2];
+
+ i = req_id % REQUEST_LIST_SIZE;
+ BUG_ON(list_empty(&adapter->req_list[i]));
+
+ counter = 0;
+ list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list) {
+ if (request->req_id == req_id) {
+ dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active);
+ dbg_tmp[1] = (u64) counter;
+ debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16);
+ list_del(&request->list);
+ break;
+ }
+ counter++;
+ }
+}
+
+struct zfcp_fsf_req *zfcp_reqlist_ismember(struct zfcp_adapter *adapter,
+ unsigned long req_id)
+{
+ struct zfcp_fsf_req *request, *tmp;
+ unsigned int i;
+
+ i = req_id % REQUEST_LIST_SIZE;
+
+ list_for_each_entry_safe(request, tmp, &adapter->req_list[i], list)
+ if (request->req_id == req_id)
+ return request;
+
+ return NULL;
+}
+
+int zfcp_reqlist_isempty(struct zfcp_adapter *adapter)
+{
+ unsigned int i;
+
+ for (i=0; i<REQUEST_LIST_SIZE; i++)
+ if (!list_empty(&adapter->req_list[i]))
+ return 0;
+
+ return 1;
+}
+
+#undef ZFCP_LOG_AREA
+
/****************************************************************/
/************** Uncategorised Functions *************************/
/****************************************************************/
@@ -961,8 +1060,12 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
INIT_LIST_HEAD(&adapter->port_remove_lh);
/* initialize list of fsf requests */
- spin_lock_init(&adapter->fsf_req_list_lock);
- INIT_LIST_HEAD(&adapter->fsf_req_list_head);
+ spin_lock_init(&adapter->req_list_lock);
+ retval = zfcp_reqlist_init(adapter);
+ if (retval) {
+ ZFCP_LOG_INFO("request list initialization failed\n");
+ goto failed_low_mem_buffers;
+ }
/* initialize debug locks */
@@ -1041,8 +1144,6 @@ zfcp_adapter_enqueue(struct ccw_device *ccw_device)
* !0 - struct zfcp_adapter data structure could not be removed
* (e.g. still used)
* locks: adapter list write lock is assumed to be held by caller
- * adapter->fsf_req_list_lock is taken and released within this
- * function and must not be held on entry
*/
void
zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
@@ -1054,14 +1155,14 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
zfcp_sysfs_adapter_remove_files(&adapter->ccw_device->dev);
dev_set_drvdata(&adapter->ccw_device->dev, NULL);
/* sanity check: no pending FSF requests */
- spin_lock_irqsave(&adapter->fsf_req_list_lock, flags);
- retval = !list_empty(&adapter->fsf_req_list_head);
- spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
- if (retval) {
+ spin_lock_irqsave(&adapter->req_list_lock, flags);
+ retval = zfcp_reqlist_isempty(adapter);
+ spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+ if (!retval) {
ZFCP_LOG_NORMAL("bug: adapter %s (%p) still in use, "
"%i requests outstanding\n",
zfcp_get_busid_by_adapter(adapter), adapter,
- atomic_read(&adapter->fsf_reqs_active));
+ atomic_read(&adapter->reqs_active));
retval = -EBUSY;
goto out;
}
@@ -1087,6 +1188,7 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
zfcp_free_low_mem_buffers(adapter);
/* free memory of adapter data structure and queues */
zfcp_qdio_free_queues(adapter);
+ zfcp_reqlist_free(adapter);
kfree(adapter->fc_stats);
kfree(adapter->stats_reset_data);
ZFCP_LOG_TRACE("freeing adapter structure\n");
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 57d8e4bfb8d..fdabadeaa9e 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -164,6 +164,11 @@ zfcp_ccw_set_online(struct ccw_device *ccw_device)
retval = zfcp_adapter_scsi_register(adapter);
if (retval)
goto out_scsi_register;
+
+ /* initialize request counter */
+ BUG_ON(!zfcp_reqlist_isempty(adapter));
+ adapter->req_no = 0;
+
zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING,
ZFCP_SET);
zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED);
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 2df512a18e2..94d1b74db35 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -52,7 +52,7 @@
/********************* GENERAL DEFINES *********************************/
/* zfcp version number, it consists of major, minor, and patch-level number */
-#define ZFCP_VERSION "4.7.0"
+#define ZFCP_VERSION "4.8.0"
/**
* zfcp_sg_to_address - determine kernel address from struct scatterlist
@@ -80,7 +80,7 @@ zfcp_address_to_sg(void *address, struct scatterlist *list)
#define REQUEST_LIST_SIZE 128
/********************* SCSI SPECIFIC DEFINES *********************************/
-#define ZFCP_SCSI_ER_TIMEOUT (100*HZ)
+#define ZFCP_SCSI_ER_TIMEOUT (10*HZ)
/********************* CIO/QDIO SPECIFIC DEFINES *****************************/
@@ -886,11 +886,11 @@ struct zfcp_adapter {
struct list_head port_remove_lh; /* head of ports to be
removed */
u32 ports; /* number of remote ports */
- struct timer_list scsi_er_timer; /* SCSI err recovery watch */
- struct list_head fsf_req_list_head; /* head of FSF req list */
- spinlock_t fsf_req_list_lock; /* lock for ops on list of
- FSF requests */
- atomic_t fsf_reqs_active; /* # active FSF reqs */
+ struct timer_list scsi_er_timer; /* SCSI err recovery watch */
+ atomic_t reqs_active; /* # active FSF reqs */
+ unsigned long req_no; /* unique FSF req number */
+ struct list_head *req_list; /* list of pending reqs */
+ spinlock_t req_list_lock; /* request list lock */
struct zfcp_qdio_queue request_queue; /* request queue */
u32 fsf_req_seq_no; /* FSF cmnd seq number */
wait_queue_head_t request_wq; /* can be used to wait for
@@ -986,6 +986,7 @@ struct zfcp_unit {
/* FSF request */
struct zfcp_fsf_req {
struct list_head list; /* list of FSF requests */
+ unsigned long req_id; /* unique request ID */
struct zfcp_adapter *adapter; /* adapter request belongs to */
u8 sbal_number; /* nr of SBALs free for use */
u8 sbal_first; /* first SBAL for this request */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 8ec8da0beaa..7f60b6fdf72 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -64,8 +64,8 @@ static int zfcp_erp_strategy_check_action(struct zfcp_erp_action *, int);
static int zfcp_erp_adapter_strategy(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *, int);
static int zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *);
-static int zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *);
-static int zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *);
+static void zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *);
+static void zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *);
static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *);
@@ -93,10 +93,9 @@ static int zfcp_erp_unit_strategy_clearstati(struct zfcp_unit *);
static int zfcp_erp_unit_strategy_close(struct zfcp_erp_action *);
static int zfcp_erp_unit_strategy_open(struct zfcp_erp_action *);
-static int zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *);
-static int zfcp_erp_action_dismiss_port(struct zfcp_port *);
-static int zfcp_erp_action_dismiss_unit(struct zfcp_unit *);
-static int zfcp_erp_action_dismiss(struct zfcp_erp_action *);
+static void zfcp_erp_action_dismiss_port(struct zfcp_port *);
+static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *);
+static void zfcp_erp_action_dismiss(struct zfcp_erp_action *);
static int zfcp_erp_action_enqueue(int, struct zfcp_adapter *,
struct zfcp_port *, struct zfcp_unit *);
@@ -135,29 +134,39 @@ zfcp_fsf_request_timeout_handler(unsigned long data)
zfcp_erp_adapter_reopen(adapter, 0);
}
-/*
- * function: zfcp_fsf_scsi_er_timeout_handler
- *
- * purpose: This function needs to be called whenever a SCSI error recovery
- * action (abort/reset) does not return.
- * Re-opening the adapter means that the command can be returned
- * by zfcp (it is guarranteed that it does not return via the
- * adapter anymore). The buffer can then be used again.
- *
- * returns: sod all
+/**
+ * zfcp_fsf_scsi_er_timeout_handler - timeout handler for scsi eh tasks
+ *
+ * This function needs to be called whenever a SCSI error recovery
+ * action (abort/reset) does not return. Re-opening the adapter means
+ * that the abort/reset command can be returned by zfcp. It won't complete
+ * via the adapter anymore (because qdio queues are closed). If ERP is
+ * already running on this adapter it will be stopped.
*/
-void
-zfcp_fsf_scsi_er_timeout_handler(unsigned long data)
+void zfcp_fsf_scsi_er_timeout_handler(unsigned long data)
{
struct zfcp_adapter *adapter = (struct zfcp_adapter *) data;
+ unsigned long flags;
ZFCP_LOG_NORMAL("warning: SCSI error recovery timed out. "
"Restarting all operations on the adapter %s\n",
zfcp_get_busid_by_adapter(adapter));
debug_text_event(adapter->erp_dbf, 1, "eh_lmem_tout");
- zfcp_erp_adapter_reopen(adapter, 0);
- return;
+ write_lock_irqsave(&adapter->erp_lock, flags);
+ if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING,
+ &adapter->status)) {
+ zfcp_erp_modify_adapter_status(adapter,
+ ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN,
+ ZFCP_CLEAR);
+ zfcp_erp_action_dismiss_adapter(adapter);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
+ /* dismiss all pending requests including requests for ERP */
+ zfcp_fsf_req_dismiss_all(adapter);
+ adapter->fsf_req_seq_no = 0;
+ } else
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
+ zfcp_erp_adapter_reopen(adapter, 0);
}
/*
@@ -670,17 +679,10 @@ zfcp_erp_unit_reopen(struct zfcp_unit *unit, int clear_mask)
return retval;
}
-/*
- * function:
- *
- * purpose: disable I/O,
- * return any open requests and clean them up,
- * aim: no pending and incoming I/O
- *
- * returns:
+/**
+ * zfcp_erp_adapter_block - mark adapter as blocked, block scsi requests
*/
-static void
-zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask)
+static void zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask)
{
debug_text_event(adapter->erp_dbf, 6, "a_bl");
zfcp_erp_modify_adapter_status(adapter,
@@ -688,15 +690,10 @@ zfcp_erp_adapter_block(struct zfcp_adapter *adapter, int clear_mask)
clear_mask, ZFCP_CLEAR);
}
-/*
- * function:
- *
- * purpose: enable I/O
- *
- * returns:
+/**
+ * zfcp_erp_adapter_unblock - mark adapter as unblocked, allow scsi requests
*/
-static void
-zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter)
+static void zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter)
{
debug_text_event(adapter->erp_dbf, 6, "a_ubl");
atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status);
@@ -848,18 +845,16 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action)
struct zfcp_adapter *adapter = erp_action->adapter;
if (erp_action->fsf_req) {
- /* take lock to ensure that request is not being deleted meanwhile */
- spin_lock(&adapter->fsf_req_list_lock);
- /* check whether fsf req does still exist */
- list_for_each_entry(fsf_req, &adapter->fsf_req_list_head, list)
- if (fsf_req == erp_action->fsf_req)
- break;
- if (fsf_req && (fsf_req->erp_action == erp_action)) {
+ /* take lock to ensure that request is not deleted meanwhile */
+ spin_lock(&adapter->req_list_lock);
+ if ((!zfcp_reqlist_ismember(adapter,
+ erp_action->fsf_req->req_id)) &&
+ (fsf_req->erp_action == erp_action)) {
/* fsf_req still exists */
debug_text_event(adapter->erp_dbf, 3, "a_ca_req");
debug_event(adapter->erp_dbf, 3, &fsf_req,
sizeof (unsigned long));
- /* dismiss fsf_req of timed out or dismissed erp_action */
+ /* dismiss fsf_req of timed out/dismissed erp_action */
if (erp_action->status & (ZFCP_STATUS_ERP_DISMISSED |
ZFCP_STATUS_ERP_TIMEDOUT)) {
debug_text_event(adapter->erp_dbf, 3,
@@ -892,30 +887,22 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action)
*/
erp_action->fsf_req = NULL;
}
- spin_unlock(&adapter->fsf_req_list_lock);
+ spin_unlock(&adapter->req_list_lock);
} else
debug_text_event(adapter->erp_dbf, 3, "a_ca_noreq");
return retval;
}
-/*
- * purpose: generic handler for asynchronous events related to erp_action events
- * (normal completion, time-out, dismissing, retry after
- * low memory condition)
- *
- * note: deletion of timer is not required (e.g. in case of a time-out),
- * but a second try does no harm,
- * we leave it in here to allow for greater simplification
+/**
+ * zfcp_erp_async_handler_nolock - complete erp_action
*
- * returns: 0 - there was an action to handle
- * !0 - otherwise
+ * Used for normal completion, time-out, dismissal and failure after
+ * low memory condition.
*/
-static int
-zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action,
- unsigned long set_mask)
+static void zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action,
+ unsigned long set_mask)
{
- int retval;
struct zfcp_adapter *adapter = erp_action->adapter;
if (zfcp_erp_action_exists(erp_action) == ZFCP_ERP_ACTION_RUNNING) {
@@ -926,43 +913,26 @@ zfcp_erp_async_handler_nolock(struct zfcp_erp_action *erp_action,
del_timer(&erp_action->timer);
erp_action->status |= set_mask;
zfcp_erp_action_ready(erp_action);
- retval = 0;
} else {
/* action is ready or gone - nothing to do */
debug_text_event(adapter->erp_dbf, 3, "a_asyh_gone");
debug_event(adapter->erp_dbf, 3, &erp_action->action,
sizeof (int));
- retval = 1;
}
-
- return retval;
}
-/*
- * purpose: generic handler for asynchronous events related to erp_action
- * events (normal completion, time-out, dismissing, retry after
- * low memory condition)
- *
- * note: deletion of timer is not required (e.g. in case of a time-out),
- * but a second try does no harm,
- * we leave it in here to allow for greater simplification
- *
- * returns: 0 - there was an action to handle
- * !0 - otherwise
+/**
+ * zfcp_erp_async_handler - wrapper for erp_async_handler_nolock w/ locking
*/
-int
-zfcp_erp_async_handler(struct zfcp_erp_action *erp_action,
- unsigned long set_mask)
+void zfcp_erp_async_handler(struct zfcp_erp_action *erp_action,
+ unsigned long set_mask)
{
struct zfcp_adapter *adapter = erp_action->adapter;
unsigned long flags;
- int retval;
write_lock_irqsave(&adapter->erp_lock, flags);
- retval = zfcp_erp_async_handler_nolock(erp_action, set_mask);
+ zfcp_erp_async_handler_nolock(erp_action, set_mask);
write_unlock_irqrestore(&adapter->erp_lock, flags);
-
- return retval;
}
/*
@@ -999,17 +969,15 @@ zfcp_erp_timeout_handler(unsigned long data)
zfcp_erp_async_handler(erp_action, ZFCP_STATUS_ERP_TIMEDOUT);
}
-/*
- * purpose: is called for an erp_action which needs to be ended
- * though not being done,
- * this is usually required if an higher is generated,
- * action gets an appropriate flag and will be processed
- * accordingly
+/**
+ * zfcp_erp_action_dismiss - dismiss an erp_action
*
- * locks: erp_lock held (thus we need to call another handler variant)
+ * adapter->erp_lock must be held
+ *
+ * Dismissal of an erp_action is usually required if an erp_action of
+ * higher priority is generated.
*/
-static int
-zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action)
+static void zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action)
{
struct zfcp_adapter *adapter = erp_action->adapter;
@@ -1017,8 +985,6 @@ zfcp_erp_action_dismiss(struct zfcp_erp_action *erp_action)
debug_event(adapter->erp_dbf, 2, &erp_action->action, sizeof (int));
zfcp_erp_async_handler_nolock(erp_action, ZFCP_STATUS_ERP_DISMISSED);
-
- return 0;
}
int
@@ -2074,18 +2040,12 @@ zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *erp_action)
return retval;
}
-/*
- * function: zfcp_qdio_cleanup
- *
- * purpose: cleans up QDIO operation for the specified adapter
- *
- * returns: 0 - successful cleanup
- * !0 - failed cleanup
+/**
+ * zfcp_erp_adapter_strategy_close_qdio - close qdio queues for an adapter
*/
-int
+static void
zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action)
{
- int retval = ZFCP_ERP_SUCCEEDED;
int first_used;
int used_count;
struct zfcp_adapter *adapter = erp_action->adapter;
@@ -2094,15 +2054,13 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action)
ZFCP_LOG_DEBUG("error: attempt to shut down inactive QDIO "
"queues on adapter %s\n",
zfcp_get_busid_by_adapter(adapter));
- retval = ZFCP_ERP_FAILED;
- goto out;
+ return;
}
/*
* Get queue_lock and clear QDIOUP flag. Thus it's guaranteed that
* do_QDIO won't be called while qdio_shutdown is in progress.
*/
-
write_lock_irq(&adapter->request_queue.queue_lock);
atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
write_unlock_irq(&adapter->request_queue.queue_lock);
@@ -2134,8 +2092,6 @@ zfcp_erp_adapter_strategy_close_qdio(struct zfcp_erp_action *erp_action)
adapter->request_queue.free_index = 0;
atomic_set(&adapter->request_queue.free_count, 0);
adapter->request_queue.distance_from_int = 0;
- out:
- return retval;
}
static int
@@ -2258,11 +2214,11 @@ zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action)
"%s)\n", zfcp_get_busid_by_adapter(adapter));
ret = ZFCP_ERP_FAILED;
}
- if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status)) {
- ZFCP_LOG_INFO("error: exchange port data failed (adapter "
+
+ /* don't treat as error for the sake of compatibility */
+ if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status))
+ ZFCP_LOG_INFO("warning: exchange port data failed (adapter "
"%s\n", zfcp_get_busid_by_adapter(adapter));
- ret = ZFCP_ERP_FAILED;
- }
return ret;
}
@@ -2292,18 +2248,12 @@ zfcp_erp_adapter_strategy_open_fsf_statusread(struct zfcp_erp_action
return retval;
}
-/*
- * function: zfcp_fsf_cleanup
- *
- * purpose: cleanup FSF operation for specified adapter
- *
- * returns: 0 - FSF operation successfully cleaned up
- * !0 - failed to cleanup FSF operation for this adapter
+/**
+ * zfcp_erp_adapter_strategy_close_fsf - stop FSF operations for an adapter
*/
-static int
+static void
zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action)
{
- int retval = ZFCP_ERP_SUCCEEDED;
struct zfcp_adapter *adapter = erp_action->adapter;
/*
@@ -2317,8 +2267,6 @@ zfcp_erp_adapter_strategy_close_fsf(struct zfcp_erp_action *erp_action)
/* all ports and units are closed */
zfcp_erp_modify_adapter_status(adapter,
ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
-
- return retval;
}
/*
@@ -3293,10 +3241,8 @@ zfcp_erp_action_cleanup(int action, struct zfcp_adapter *adapter,
}
-static int
-zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
+void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
{
- int retval = 0;
struct zfcp_port *port;
debug_text_event(adapter->erp_dbf, 5, "a_actab");
@@ -3305,14 +3251,10 @@ zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
else
list_for_each_entry(port, &adapter->port_list_head, list)
zfcp_erp_action_dismiss_port(port);
-
- return retval;
}
-static int
-zfcp_erp_action_dismiss_port(struct zfcp_port *port)
+static void zfcp_erp_action_dismiss_port(struct zfcp_port *port)
{
- int retval = 0;
struct zfcp_unit *unit;
struct zfcp_adapter *adapter = port->adapter;
@@ -3323,22 +3265,16 @@ zfcp_erp_action_dismiss_port(struct zfcp_port *port)
else
list_for_each_entry(unit, &port->unit_list_head, list)
zfcp_erp_action_dismiss_unit(unit);
-
- return retval;
}
-static int
-zfcp_erp_action_dismiss_unit(struct zfcp_unit *unit)
+static void zfcp_erp_action_dismiss_unit(struct zfcp_unit *unit)
{
- int retval = 0;
struct zfcp_adapter *adapter = unit->port->adapter;
debug_text_event(adapter->erp_dbf, 5, "u_actab");
debug_event(adapter->erp_dbf, 5, &unit->fcp_lun, sizeof (fcp_lun_t));
if (atomic_test_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &unit->status))
zfcp_erp_action_dismiss(&unit->erp_action);
-
- return retval;
}
static inline void
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index d02366004cd..146d7a2b4c4 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -63,7 +63,6 @@ extern int zfcp_qdio_allocate_queues(struct zfcp_adapter *);
extern void zfcp_qdio_free_queues(struct zfcp_adapter *);
extern int zfcp_qdio_determine_pci(struct zfcp_qdio_queue *,
struct zfcp_fsf_req *);
-extern int zfcp_qdio_reqid_check(struct zfcp_adapter *, void *);
extern volatile struct qdio_buffer_element *zfcp_qdio_sbale_req
(struct zfcp_fsf_req *, int, int);
@@ -140,6 +139,7 @@ extern void zfcp_erp_modify_adapter_status(struct zfcp_adapter *, u32, int);
extern int zfcp_erp_adapter_reopen(struct zfcp_adapter *, int);
extern int zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int);
extern void zfcp_erp_adapter_failed(struct zfcp_adapter *);
+extern void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *);
extern void zfcp_erp_modify_port_status(struct zfcp_port *, u32, int);
extern int zfcp_erp_port_reopen(struct zfcp_port *, int);
@@ -156,7 +156,7 @@ extern void zfcp_erp_unit_failed(struct zfcp_unit *);
extern int zfcp_erp_thread_setup(struct zfcp_adapter *);
extern int zfcp_erp_thread_kill(struct zfcp_adapter *);
extern int zfcp_erp_wait(struct zfcp_adapter *);
-extern int zfcp_erp_async_handler(struct zfcp_erp_action *, unsigned long);
+extern void zfcp_erp_async_handler(struct zfcp_erp_action *, unsigned long);
extern int zfcp_test_link(struct zfcp_port *);
@@ -190,5 +190,10 @@ extern void zfcp_scsi_dbf_event_abort(const char *, struct zfcp_adapter *,
struct zfcp_fsf_req *);
extern void zfcp_scsi_dbf_event_devreset(const char *, u8, struct zfcp_unit *,
struct scsi_cmnd *);
+extern void zfcp_reqlist_add(struct zfcp_adapter *, struct zfcp_fsf_req *);
+extern void zfcp_reqlist_remove(struct zfcp_adapter *, unsigned long);
+extern struct zfcp_fsf_req *zfcp_reqlist_ismember(struct zfcp_adapter *,
+ unsigned long);
+extern int zfcp_reqlist_isempty(struct zfcp_adapter *);
#endif /* ZFCP_EXT_H */
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 31db2b06fab..ff2eacf5ec8 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -49,7 +49,6 @@ static int zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *);
static void zfcp_fsf_link_down_info_eval(struct zfcp_adapter *,
struct fsf_link_down_info *);
static int zfcp_fsf_req_dispatch(struct zfcp_fsf_req *);
-static void zfcp_fsf_req_dismiss(struct zfcp_fsf_req *);
/* association between FSF command and FSF QTCB type */
static u32 fsf_qtcb_type[] = {
@@ -146,47 +145,48 @@ zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req)
kfree(fsf_req);
}
-/*
- * function:
- *
- * purpose:
- *
- * returns:
- *
- * note: qdio queues shall be down (no ongoing inbound processing)
+/**
+ * zfcp_fsf_req_dismiss - dismiss a single fsf request
*/
-int
-zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
+static void zfcp_fsf_req_dismiss(struct zfcp_adapter *adapter,
+ struct zfcp_fsf_req *fsf_req,
+ unsigned int counter)
{
- struct zfcp_fsf_req *fsf_req, *tmp;
- unsigned long flags;
- LIST_HEAD(remove_queue);
+ u64 dbg_tmp[2];
- spin_lock_irqsave(&adapter->fsf_req_list_lock, flags);
- list_splice_init(&adapter->fsf_req_list_head, &remove_queue);
- atomic_set(&adapter->fsf_reqs_active, 0);
- spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
-
- list_for_each_entry_safe(fsf_req, tmp, &remove_queue, list) {
- list_del(&fsf_req->list);
- zfcp_fsf_req_dismiss(fsf_req);
- }
-
- return 0;
+ dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active);
+ dbg_tmp[1] = (u64) counter;
+ debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16);
+ list_del(&fsf_req->list);
+ fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
+ zfcp_fsf_req_complete(fsf_req);
}
-/*
- * function:
- *
- * purpose:
- *
- * returns:
+/**
+ * zfcp_fsf_req_dismiss_all - dismiss all remaining fsf requests
*/
-static void
-zfcp_fsf_req_dismiss(struct zfcp_fsf_req *fsf_req)
+int zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter)
{
- fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
- zfcp_fsf_req_complete(fsf_req);
+ struct zfcp_fsf_req *request, *tmp;
+ unsigned long flags;
+ unsigned int i, counter;
+
+ spin_lock_irqsave(&adapter->req_list_lock, flags);
+ atomic_set(&adapter->reqs_active, 0);
+ for (i=0; i<REQUEST_LIST_SIZE; i++) {
+ if (list_empty(&adapter->req_list[i]))
+ continue;
+
+ counter = 0;
+ list_for_each_entry_safe(request, tmp,
+ &adapter->req_list[i], list) {
+ zfcp_fsf_req_dismiss(adapter, request, counter);
+ counter++;
+ }
+ }
+ spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+
+ return 0;
}
/*
@@ -4592,12 +4592,14 @@ static inline void
zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req)
{
if (likely(fsf_req->qtcb != NULL)) {
- fsf_req->qtcb->prefix.req_seq_no = fsf_req->adapter->fsf_req_seq_no;
- fsf_req->qtcb->prefix.req_id = (unsigned long)fsf_req;
+ fsf_req->qtcb->prefix.req_seq_no =
+ fsf_req->adapter->fsf_req_seq_no;
+ fsf_req->qtcb->prefix.req_id = fsf_req->req_id;
fsf_req->qtcb->prefix.ulp_info = ZFCP_ULP_INFO_VERSION;
- fsf_req->qtcb->prefix.qtcb_type = fsf_qtcb_type[fsf_req->fsf_command];
+ fsf_req->qtcb->prefix.qtcb_type =
+ fsf_qtcb_type[fsf_req->fsf_command];
fsf_req->qtcb->prefix.qtcb_version = ZFCP_QTCB_VERSION;
- fsf_req->qtcb->header.req_handle = (unsigned long)fsf_req;
+ fsf_req->qtcb->header.req_handle = fsf_req->req_id;
fsf_req->qtcb->header.fsf_command = fsf_req->fsf_command;
}
}
@@ -4654,6 +4656,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags,
{
volatile struct qdio_buffer_element *sbale;
struct zfcp_fsf_req *fsf_req = NULL;
+ unsigned long flags;
int ret = 0;
struct zfcp_qdio_queue *req_queue = &adapter->request_queue;
@@ -4668,6 +4671,12 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags,
fsf_req->adapter = adapter;
fsf_req->fsf_command = fsf_cmd;
+ INIT_LIST_HEAD(&fsf_req->list);
+
+ /* unique request id */
+ spin_lock_irqsave(&adapter->req_list_lock, flags);
+ fsf_req->req_id = adapter->req_no++;
+ spin_unlock_irqrestore(&adapter->req_list_lock, flags);
zfcp_fsf_req_qtcb_init(fsf_req);
@@ -4707,7 +4716,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags,
sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0);
/* setup common SBALE fields */
- sbale[0].addr = fsf_req;
+ sbale[0].addr = (void *) fsf_req->req_id;
sbale[0].flags |= SBAL_FLAGS0_COMMAND;
if (likely(fsf_req->qtcb != NULL)) {
sbale[1].addr = (void *) fsf_req->qtcb;
@@ -4747,7 +4756,7 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
volatile struct qdio_buffer_element *sbale;
int inc_seq_no;
int new_distance_from_int;
- unsigned long flags;
+ u64 dbg_tmp[2];
int retval = 0;
adapter = fsf_req->adapter;
@@ -4761,10 +4770,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) sbale[1].addr,
sbale[1].length);
- /* put allocated FSF request at list tail */
- spin_lock_irqsave(&adapter->fsf_req_list_lock, flags);
- list_add_tail(&fsf_req->list, &adapter->fsf_req_list_head);
- spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
+ /* put allocated FSF request into hash table */
+ spin_lock(&adapter->req_list_lock);
+ zfcp_reqlist_add(adapter, fsf_req);
+ spin_unlock(&adapter->req_list_lock);
inc_seq_no = (fsf_req->qtcb != NULL);
@@ -4803,6 +4812,10 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
QDIO_FLAG_SYNC_OUTPUT,
0, fsf_req->sbal_first, fsf_req->sbal_number, NULL);
+ dbg_tmp[0] = (unsigned long) sbale[0].addr;
+ dbg_tmp[1] = (u64) retval;
+ debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16);
+
if (unlikely(retval)) {
/* Queues are down..... */
retval = -EIO;
@@ -4812,22 +4825,17 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
*/
if (timer)
del_timer(timer);
- spin_lock_irqsave(&adapter->fsf_req_list_lock, flags);
- list_del(&fsf_req->list);
- spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
- /*
- * adjust the number of free SBALs in request queue as well as
- * position of first one
- */
+ spin_lock(&adapter->req_list_lock);
+ zfcp_reqlist_remove(adapter, fsf_req->req_id);
+ spin_unlock(&adapter->req_list_lock);
+ /* undo changes in request queue made for this request */
zfcp_qdio_zero_sbals(req_queue->buffer,
fsf_req->sbal_first, fsf_req->sbal_number);
atomic_add(fsf_req->sbal_number, &req_queue->free_count);
- req_queue->free_index -= fsf_req->sbal_number; /* increase */
+ req_queue->free_index -= fsf_req->sbal_number;
req_queue->free_index += QDIO_MAX_BUFFERS_PER_Q;
req_queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */
- ZFCP_LOG_DEBUG
- ("error: do_QDIO failed. Buffers could not be enqueued "
- "to request queue.\n");
+ zfcp_erp_adapter_reopen(adapter, 0);
} else {
req_queue->distance_from_int = new_distance_from_int;
/*
@@ -4843,7 +4851,7 @@ zfcp_fsf_req_send(struct zfcp_fsf_req *fsf_req, struct timer_list *timer)
adapter->fsf_req_seq_no++;
/* count FSF requests pending */
- atomic_inc(&adapter->fsf_reqs_active);
+ atomic_inc(&adapter->reqs_active);
}
return retval;
}
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 49ea5add4ab..dbd9f48e863 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -282,6 +282,37 @@ zfcp_qdio_request_handler(struct ccw_device *ccw_device,
return;
}
+/**
+ * zfcp_qdio_reqid_check - checks for valid reqids or unsolicited status
+ */
+static int zfcp_qdio_reqid_check(struct zfcp_adapter *adapter,
+ unsigned long req_id)
+{
+ struct zfcp_fsf_req *fsf_req;
+ unsigned long flags;
+
+ debug_long_event(adapter->erp_dbf, 4, req_id);
+
+ spin_lock_irqsave(&adapter->req_list_lock, flags);
+ fsf_req = zfcp_reqlist_ismember(adapter, req_id);
+
+ if (!fsf_req) {
+ spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+ ZFCP_LOG_NORMAL("error: unknown request id (%ld).\n", req_id);
+ zfcp_erp_adapter_reopen(adapter, 0);
+ return -EINVAL;
+ }
+
+ zfcp_reqlist_remove(adapter, req_id);
+ atomic_dec(&adapter->reqs_active);
+ spin_unlock_irqrestore(&adapter->req_list_lock, flags);
+
+ /* finish the FSF request */
+ zfcp_fsf_req_complete(fsf_req);
+
+ return 0;
+}
+
/*
* function: zfcp_qdio_response_handler
*
@@ -344,7 +375,7 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device,
/* look for QDIO request identifiers in SB */
buffere = &buffer->element[buffere_index];
retval = zfcp_qdio_reqid_check(adapter,
- (void *) buffere->addr);
+ (unsigned long) buffere->addr);
if (retval) {
ZFCP_LOG_NORMAL("bug: unexpected inbound "
@@ -415,52 +446,6 @@ zfcp_qdio_response_handler(struct ccw_device *ccw_device,
return;
}
-/*
- * function: zfcp_qdio_reqid_check
- *
- * purpose: checks for valid reqids or unsolicited status
- *
- * returns: 0 - valid request id or unsolicited status
- * !0 - otherwise
- */
-int
-zfcp_qdio_reqid_check(struct zfcp_adapter *adapter, void *sbale_addr)
-{
- struct zfcp_fsf_req *fsf_req;
- unsigned long flags;
-
- /* invalid (per convention used in this driver) */
- if (unlikely(!sbale_addr)) {
- ZFCP_LOG_NORMAL("bug: invalid reqid\n");
- return -EINVAL;
- }
-
- /* valid request id and thus (hopefully :) valid fsf_req address */
- fsf_req = (struct zfcp_fsf_req *) sbale_addr;
-
- /* serialize with zfcp_fsf_req_dismiss_all */
- spin_lock_irqsave(&adapter->fsf_req_list_lock, flags);
- if (list_empty(&adapter->fsf_req_list_head)) {
- spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
- return 0;
- }
- list_del(&fsf_req->list);
- atomic_dec(&adapter->fsf_reqs_active);
- spin_unlock_irqrestore(&adapter->fsf_req_list_lock, flags);
-
- if (unlikely(adapter != fsf_req->adapter)) {
- ZFCP_LOG_NORMAL("bug: invalid reqid (fsf_req=%p, "
- "fsf_req->adapter=%p, adapter=%p)\n",
- fsf_req, fsf_req->adapter, adapter);
- return -EINVAL;
- }
-
- /* finish the FSF request */
- zfcp_fsf_req_complete(fsf_req);
-
- return 0;
-}
-
/**
* zfcp_qdio_sbale_get - return pointer to SBALE of qdio_queue
* @queue: queue from which SBALE should be returned
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 671f4a6a5d1..1bb55086db9 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -30,7 +30,6 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *,
void (*done) (struct scsi_cmnd *));
static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *);
static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *);
-static int zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *);
static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *);
static int zfcp_task_management_function(struct zfcp_unit *, u8,
struct scsi_cmnd *);
@@ -46,30 +45,22 @@ struct zfcp_data zfcp_data = {
.scsi_host_template = {
.name = ZFCP_NAME,
.proc_name = "zfcp",
- .proc_info = NULL,
- .detect = NULL,
.slave_alloc = zfcp_scsi_slave_alloc,
.slave_configure = zfcp_scsi_slave_configure,
.slave_destroy = zfcp_scsi_slave_destroy,
.queuecommand = zfcp_scsi_queuecommand,
.eh_abort_handler = zfcp_scsi_eh_abort_handler,
.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
- .eh_bus_reset_handler = zfcp_scsi_eh_bus_reset_handler,
+ .eh_bus_reset_handler = zfcp_scsi_eh_host_reset_handler,
.eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
.can_queue = 4096,
.this_id = -1,
- /*
- * FIXME:
- * one less? can zfcp_create_sbale cope with it?
- */
.sg_tablesize = ZFCP_MAX_SBALES_PER_REQ,
.cmd_per_lun = 1,
- .unchecked_isa_dma = 0,
.use_clustering = 1,
.sdev_attrs = zfcp_sysfs_sdev_attrs,
},
.driver_version = ZFCP_VERSION,
- /* rest initialised with zeros */
};
/* Find start of Response Information in FCP response unit*/
@@ -176,8 +167,14 @@ zfcp_scsi_slave_alloc(struct scsi_device *sdp)
return retval;
}
-static void
-zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
+/**
+ * zfcp_scsi_slave_destroy - called when scsi device is removed
+ *
+ * Remove reference to associated scsi device for an zfcp_unit.
+ * Mark zfcp_unit as failed. The scsi device might be deleted via sysfs
+ * or a scan for this device might have failed.
+ */
+static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
{
struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
@@ -185,6 +182,7 @@ zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status);
sdpnt->hostdata = NULL;
unit->device = NULL;
+ zfcp_erp_unit_failed(unit);
zfcp_unit_put(unit);
} else {
ZFCP_LOG_NORMAL("bug: no unit associated with SCSI device at "
@@ -549,35 +547,38 @@ zfcp_task_management_function(struct zfcp_unit *unit, u8 tm_flags,
}
/**
- * zfcp_scsi_eh_bus_reset_handler - reset bus (reopen adapter)
+ * zfcp_scsi_eh_host_reset_handler - handler for host and bus reset
+ *
+ * If ERP is already running it will be stopped.
*/
-int
-zfcp_scsi_eh_bus_reset_handler(struct scsi_cmnd *scpnt)
+int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
{
- struct zfcp_unit *unit = (struct zfcp_unit*) scpnt->device->hostdata;
- struct zfcp_adapter *adapter = unit->port->adapter;
-
- ZFCP_LOG_NORMAL("bus reset because of problems with "
- "unit 0x%016Lx\n", unit->fcp_lun);
- zfcp_erp_adapter_reopen(adapter, 0);
- zfcp_erp_wait(adapter);
-
- return SUCCESS;
-}
+ struct zfcp_unit *unit;
+ struct zfcp_adapter *adapter;
+ unsigned long flags;
-/**
- * zfcp_scsi_eh_host_reset_handler - reset host (reopen adapter)
- */
-int
-zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
-{
- struct zfcp_unit *unit = (struct zfcp_unit*) scpnt->device->hostdata;
- struct zfcp_adapter *adapter = unit->port->adapter;
+ unit = (struct zfcp_unit*) scpnt->device->hostdata;
+ adapter = unit->port->adapter;
- ZFCP_LOG_NORMAL("host reset because of problems with "
+ ZFCP_LOG_NORMAL("host/bus reset because of problems with "
"unit 0x%016Lx\n", unit->fcp_lun);
- zfcp_erp_adapter_reopen(adapter, 0);
- zfcp_erp_wait(adapter);
+
+ write_lock_irqsave(&adapter->erp_lock, flags);
+ if (atomic_test_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING,
+ &adapter->status)) {
+ zfcp_erp_modify_adapter_status(adapter,
+ ZFCP_STATUS_COMMON_UNBLOCKED|ZFCP_STATUS_COMMON_OPEN,
+ ZFCP_CLEAR);
+ zfcp_erp_action_dismiss_adapter(adapter);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
+ zfcp_fsf_req_dismiss_all(adapter);
+ adapter->fsf_req_seq_no = 0;
+ zfcp_erp_adapter_reopen(adapter, 0);
+ } else {
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
+ zfcp_erp_adapter_reopen(adapter, 0);
+ zfcp_erp_wait(adapter);
+ }
return SUCCESS;
}
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 5e8afc87698..2d20caf377f 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -390,7 +390,8 @@ static struct ata_port_info piix_port_info[] = {
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR |
+ PIIX_FLAG_IGNORE_PCS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -467,6 +468,11 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int force_pcs = 0;
+module_param(force_pcs, int, 0444);
+MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around "
+ "device mis-detection (0=default, 1=ignore PCS, 2=honor PCS)");
+
/**
* piix_pata_cbl_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
@@ -531,27 +537,25 @@ static void piix_pata_error_handler(struct ata_port *ap)
}
/**
- * piix_sata_prereset - prereset for SATA host controller
+ * piix_sata_present_mask - determine present mask for SATA host controller
* @ap: Target port
*
- * Reads and configures SATA PCI device's PCI config register
- * Port Configuration and Status (PCS) to determine port and
- * device availability. Return -ENODEV to skip reset if no
- * device is present.
+ * Reads SATA PCI device's PCI config register Port Configuration
+ * and Status (PCS) to determine port and device availability.
*
* LOCKING:
* None (inherited from caller).
*
* RETURNS:
- * 0 if device is present, -ENODEV otherwise.
+ * determined present_mask
*/
-static int piix_sata_prereset(struct ata_port *ap)
+static unsigned int piix_sata_present_mask(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
struct piix_host_priv *hpriv = ap->host_set->private_data;
const unsigned int *map = hpriv->map;
int base = 2 * ap->hard_port_no;
- unsigned int present = 0;
+ unsigned int present_mask = 0;
int port, i;
u16 pcs;
@@ -564,24 +568,52 @@ static int piix_sata_prereset(struct ata_port *ap)
continue;
if ((ap->flags & PIIX_FLAG_IGNORE_PCS) ||
(pcs & 1 << (hpriv->map_db->present_shift + port)))
- present = 1;
+ present_mask |= 1 << i;
}
- DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n",
- ap->id, pcs, present);
+ DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
+ ap->id, pcs, present_mask);
- if (!present) {
- ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
- ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
- return 0;
+ return present_mask;
+}
+
+/**
+ * piix_sata_softreset - reset SATA host port via ATA SRST
+ * @ap: port to reset
+ * @classes: resulting classes of attached devices
+ *
+ * Reset SATA host port via ATA SRST. On controllers with
+ * reliable PCS present bits, the bits are used to determine
+ * device presence.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int piix_sata_softreset(struct ata_port *ap, unsigned int *classes)
+{
+ unsigned int present_mask;
+ int i, rc;
+
+ present_mask = piix_sata_present_mask(ap);
+
+ rc = ata_std_softreset(ap, classes);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ if (!(present_mask & (1 << i)))
+ classes[i] = ATA_DEV_NONE;
}
- return ata_std_prereset(ap);
+ return 0;
}
static void piix_sata_error_handler(struct ata_port *ap)
{
- ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL,
+ ata_bmdma_drive_eh(ap, ata_std_prereset, piix_sata_softreset, NULL,
ata_std_postreset);
}
@@ -785,6 +817,7 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
}
static void __devinit piix_init_pcs(struct pci_dev *pdev,
+ struct ata_port_info *pinfo,
const struct piix_map_db *map_db)
{
u16 pcs, new_pcs;
@@ -798,6 +831,18 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev,
pci_write_config_word(pdev, ICH5_PCS, new_pcs);
msleep(150);
}
+
+ if (force_pcs == 1) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "force ignoring PCS (0x%x)\n", new_pcs);
+ pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS;
+ pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS;
+ } else if (force_pcs == 2) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "force honoring PCS (0x%x)\n", new_pcs);
+ pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS;
+ pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS;
+ }
}
static void __devinit piix_init_sata_map(struct pci_dev *pdev,
@@ -906,7 +951,8 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (host_flags & ATA_FLAG_SATA) {
piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- piix_init_pcs(pdev, piix_map_db_table[ent->driver_data]);
+ piix_init_pcs(pdev, port_info,
+ piix_map_db_table[ent->driver_data]);
}
/* On ICH5, some BIOSen disable the interrupt using the
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
index 98bd22714d0..5630868c1b2 100644
--- a/drivers/scsi/esp.c
+++ b/drivers/scsi/esp.c
@@ -1146,7 +1146,7 @@ static struct sbus_dev sun4_esp_dev;
static int __init esp_sun4_probe(struct scsi_host_template *tpnt)
{
if (sun4_esp_physaddr) {
- memset(&sun4_esp_dev, 0, sizeof(esp_dev));
+ memset(&sun4_esp_dev, 0, sizeof(sun4_esp_dev));
sun4_esp_dev.reg_addrs[0].phys_addr = sun4_esp_physaddr;
sun4_esp_dev.irqs[0] = 4;
sun4_esp_dev.resource[0].start = sun4_esp_physaddr;
@@ -1162,6 +1162,7 @@ static int __init esp_sun4_probe(struct scsi_host_template *tpnt)
static int __devexit esp_sun4_remove(void)
{
+ struct of_device *dev = &sun4_esp_dev.ofdev;
struct esp *esp = dev_get_drvdata(&dev->dev);
return esp_remove_common(esp);
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index ab2f8b26790..bcb3444f1dc 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -45,10 +45,6 @@ static char driver_name[] = "hptiop";
static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver";
static const char driver_ver[] = "v1.0 (060426)";
-static DEFINE_SPINLOCK(hptiop_hba_list_lock);
-static LIST_HEAD(hptiop_hba_list);
-static int hptiop_cdev_major = -1;
-
static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag);
static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag);
static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg);
@@ -577,7 +573,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba)
if (atomic_xchg(&hba->resetting, 1) == 0) {
atomic_inc(&hba->reset_count);
writel(IOPMU_INBOUND_MSG0_RESET,
- &hba->iop->outbound_msgaddr0);
+ &hba->iop->inbound_msgaddr0);
hptiop_pci_posting_flush(hba->iop);
}
@@ -620,532 +616,11 @@ static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev,
return queue_depth;
}
-struct hptiop_getinfo {
- char __user *buffer;
- loff_t buflength;
- loff_t bufoffset;
- loff_t buffillen;
- loff_t filpos;
-};
-
-static void hptiop_copy_mem_info(struct hptiop_getinfo *pinfo,
- char *data, int datalen)
-{
- if (pinfo->filpos < pinfo->bufoffset) {
- if (pinfo->filpos + datalen <= pinfo->bufoffset) {
- pinfo->filpos += datalen;
- return;
- } else {
- data += (pinfo->bufoffset - pinfo->filpos);
- datalen -= (pinfo->bufoffset - pinfo->filpos);
- pinfo->filpos = pinfo->bufoffset;
- }
- }
-
- pinfo->filpos += datalen;
- if (pinfo->buffillen == pinfo->buflength)
- return;
-
- if (pinfo->buflength - pinfo->buffillen < datalen)
- datalen = pinfo->buflength - pinfo->buffillen;
-
- if (copy_to_user(pinfo->buffer + pinfo->buffillen, data, datalen))
- return;
-
- pinfo->buffillen += datalen;
-}
-
-static int hptiop_copy_info(struct hptiop_getinfo *pinfo, char *fmt, ...)
-{
- va_list args;
- char buf[128];
- int len;
-
- va_start(args, fmt);
- len = vsnprintf(buf, sizeof(buf), fmt, args);
- va_end(args);
- hptiop_copy_mem_info(pinfo, buf, len);
- return len;
-}
-
-static void hptiop_ioctl_done(struct hpt_ioctl_k *arg)
-{
- arg->done = NULL;
- wake_up(&arg->hba->ioctl_wq);
-}
-
-static void hptiop_do_ioctl(struct hpt_ioctl_k *arg)
-{
- struct hptiop_hba *hba = arg->hba;
- u32 val;
- struct hpt_iop_request_ioctl_command __iomem *req;
- int ioctl_retry = 0;
-
- dprintk("scsi%d: hptiop_do_ioctl\n", hba->host->host_no);
-
- /*
- * check (in + out) buff size from application.
- * outbuf must be dword aligned.
- */
- if (((arg->inbuf_size + 3) & ~3) + arg->outbuf_size >
- hba->max_request_size
- - sizeof(struct hpt_iop_request_header)
- - 4 * sizeof(u32)) {
- dprintk("scsi%d: ioctl buf size (%d/%d) is too large\n",
- hba->host->host_no,
- arg->inbuf_size, arg->outbuf_size);
- arg->result = HPT_IOCTL_RESULT_FAILED;
- return;
- }
-
-retry:
- spin_lock_irq(hba->host->host_lock);
-
- val = readl(&hba->iop->inbound_queue);
- if (val == IOPMU_QUEUE_EMPTY) {
- spin_unlock_irq(hba->host->host_lock);
- dprintk("scsi%d: no free req for ioctl\n", hba->host->host_no);
- arg->result = -1;
- return;
- }
-
- req = (struct hpt_iop_request_ioctl_command __iomem *)
- ((unsigned long)hba->iop + val);
-
- writel(HPT_CTL_CODE_LINUX_TO_IOP(arg->ioctl_code),
- &req->ioctl_code);
- writel(arg->inbuf_size, &req->inbuf_size);
- writel(arg->outbuf_size, &req->outbuf_size);
-
- /*
- * use the buffer on the IOP local memory first, then copy it
- * back to host.
- * the caller's request buffer shoudl be little-endian.
- */
- if (arg->inbuf_size)
- memcpy_toio(req->buf, arg->inbuf, arg->inbuf_size);
-
- /* correct the controller ID for IOP */
- if ((arg->ioctl_code == HPT_IOCTL_GET_CHANNEL_INFO ||
- arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO_V2 ||
- arg->ioctl_code == HPT_IOCTL_GET_CONTROLLER_INFO)
- && arg->inbuf_size >= sizeof(u32))
- writel(0, req->buf);
-
- writel(IOP_REQUEST_TYPE_IOCTL_COMMAND, &req->header.type);
- writel(0, &req->header.flags);
- writel(offsetof(struct hpt_iop_request_ioctl_command, buf)
- + arg->inbuf_size, &req->header.size);
- writel((u32)(unsigned long)arg, &req->header.context);
- writel(BITS_PER_LONG > 32 ? (u32)((unsigned long)arg>>32) : 0,
- &req->header.context_hi32);
- writel(IOP_RESULT_PENDING, &req->header.result);
-
- arg->result = HPT_IOCTL_RESULT_FAILED;
- arg->done = hptiop_ioctl_done;
-
- writel(val, &hba->iop->inbound_queue);
- hptiop_pci_posting_flush(hba->iop);
-
- spin_unlock_irq(hba->host->host_lock);
-
- wait_event_timeout(hba->ioctl_wq, arg->done == NULL, 60 * HZ);
-
- if (arg->done != NULL) {
- hptiop_reset_hba(hba);
- if (ioctl_retry++ < 3)
- goto retry;
- }
-
- dprintk("hpt_iop_ioctl %x result %d\n",
- arg->ioctl_code, arg->result);
-}
-
-static int __hpt_do_ioctl(struct hptiop_hba *hba, u32 code, void *inbuf,
- u32 insize, void *outbuf, u32 outsize)
-{
- struct hpt_ioctl_k arg;
- arg.hba = hba;
- arg.ioctl_code = code;
- arg.inbuf = inbuf;
- arg.outbuf = outbuf;
- arg.inbuf_size = insize;
- arg.outbuf_size = outsize;
- arg.bytes_returned = NULL;
- hptiop_do_ioctl(&arg);
- return arg.result;
-}
-
-static inline int hpt_id_valid(__le32 id)
-{
- return id != 0 && id != cpu_to_le32(0xffffffff);
-}
-
-static int hptiop_get_controller_info(struct hptiop_hba *hba,
- struct hpt_controller_info *pinfo)
-{
- int id = 0;
-
- return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CONTROLLER_INFO,
- &id, sizeof(int), pinfo, sizeof(*pinfo));
-}
-
-
-static int hptiop_get_channel_info(struct hptiop_hba *hba, int bus,
- struct hpt_channel_info *pinfo)
-{
- u32 ids[2];
-
- ids[0] = 0;
- ids[1] = bus;
- return __hpt_do_ioctl(hba, HPT_IOCTL_GET_CHANNEL_INFO,
- ids, sizeof(ids), pinfo, sizeof(*pinfo));
-
-}
-
-static int hptiop_get_logical_devices(struct hptiop_hba *hba,
- __le32 *pids, int maxcount)
-{
- int i;
- u32 count = maxcount - 1;
-
- if (__hpt_do_ioctl(hba, HPT_IOCTL_GET_LOGICAL_DEVICES,
- &count, sizeof(u32),
- pids, sizeof(u32) * maxcount))
- return -1;
-
- maxcount = le32_to_cpu(pids[0]);
- for (i = 0; i < maxcount; i++)
- pids[i] = pids[i+1];
-
- return maxcount;
-}
-
-static int hptiop_get_device_info_v3(struct hptiop_hba *hba, __le32 id,
- struct hpt_logical_device_info_v3 *pinfo)
-{
- return __hpt_do_ioctl(hba, HPT_IOCTL_GET_DEVICE_INFO_V3,
- &id, sizeof(u32),
- pinfo, sizeof(*pinfo));
-}
-
-static const char *get_array_status(struct hpt_logical_device_info_v3 *devinfo)
-{
- static char s[64];
- u32 flags = le32_to_cpu(devinfo->u.array.flags);
- u32 trans_prog = le32_to_cpu(devinfo->u.array.transforming_progress);
- u32 reb_prog = le32_to_cpu(devinfo->u.array.rebuilding_progress);
-
- if (flags & ARRAY_FLAG_DISABLED)
- return "Disabled";
- else if (flags & ARRAY_FLAG_TRANSFORMING)
- sprintf(s, "Expanding/Migrating %d.%d%%%s%s",
- trans_prog / 100,
- trans_prog % 100,
- (flags & (ARRAY_FLAG_NEEDBUILDING|ARRAY_FLAG_BROKEN))?
- ", Critical" : "",
- ((flags & ARRAY_FLAG_NEEDINITIALIZING) &&
- !(flags & ARRAY_FLAG_REBUILDING) &&
- !(flags & ARRAY_FLAG_INITIALIZING))?
- ", Unintialized" : "");
- else if ((flags & ARRAY_FLAG_BROKEN) &&
- devinfo->u.array.array_type != AT_RAID6)
- return "Critical";
- else if (flags & ARRAY_FLAG_REBUILDING)
- sprintf(s,
- (flags & ARRAY_FLAG_NEEDINITIALIZING)?
- "%sBackground initializing %d.%d%%" :
- "%sRebuilding %d.%d%%",
- (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
- reb_prog / 100,
- reb_prog % 100);
- else if (flags & ARRAY_FLAG_VERIFYING)
- sprintf(s, "%sVerifying %d.%d%%",
- (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
- reb_prog / 100,
- reb_prog % 100);
- else if (flags & ARRAY_FLAG_INITIALIZING)
- sprintf(s, "%sForground initializing %d.%d%%",
- (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
- reb_prog / 100,
- reb_prog % 100);
- else if (flags & ARRAY_FLAG_NEEDTRANSFORM)
- sprintf(s,"%s%s%s", "Need Expanding/Migrating",
- (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "",
- ((flags & ARRAY_FLAG_NEEDINITIALIZING) &&
- !(flags & ARRAY_FLAG_REBUILDING) &&
- !(flags & ARRAY_FLAG_INITIALIZING))?
- ", Unintialized" : "");
- else if (flags & ARRAY_FLAG_NEEDINITIALIZING &&
- !(flags & ARRAY_FLAG_REBUILDING) &&
- !(flags & ARRAY_FLAG_INITIALIZING))
- sprintf(s,"%sUninitialized",
- (flags & ARRAY_FLAG_BROKEN)? "Critical, " : "");
- else if ((flags & ARRAY_FLAG_NEEDBUILDING) ||
- (flags & ARRAY_FLAG_BROKEN))
- return "Critical";
- else
- return "Normal";
- return s;
-}
-
-static void hptiop_dump_devinfo(struct hptiop_hba *hba,
- struct hptiop_getinfo *pinfo, __le32 id, int indent)
-{
- struct hpt_logical_device_info_v3 devinfo;
- int i;
- u64 capacity;
-
- for (i = 0; i < indent; i++)
- hptiop_copy_info(pinfo, "\t");
-
- if (hptiop_get_device_info_v3(hba, id, &devinfo)) {
- hptiop_copy_info(pinfo, "unknown\n");
- return;
- }
-
- switch (devinfo.type) {
-
- case LDT_DEVICE: {
- struct hd_driveid *driveid;
- u32 flags = le32_to_cpu(devinfo.u.device.flags);
-
- driveid = (struct hd_driveid *)devinfo.u.device.ident;
- /* model[] is 40 chars long, but we just want 20 chars here */
- driveid->model[20] = 0;
-
- if (indent)
- if (flags & DEVICE_FLAG_DISABLED)
- hptiop_copy_info(pinfo,"Missing\n");
- else
- hptiop_copy_info(pinfo, "CH%d %s\n",
- devinfo.u.device.path_id + 1,
- driveid->model);
- else {
- capacity = le64_to_cpu(devinfo.capacity) * 512;
- do_div(capacity, 1000000);
- hptiop_copy_info(pinfo,
- "CH%d %s, %lluMB, %s %s%s%s%s\n",
- devinfo.u.device.path_id + 1,
- driveid->model,
- capacity,
- (flags & DEVICE_FLAG_DISABLED)?
- "Disabled" : "Normal",
- devinfo.u.device.read_ahead_enabled?
- "[RA]" : "",
- devinfo.u.device.write_cache_enabled?
- "[WC]" : "",
- devinfo.u.device.TCQ_enabled?
- "[TCQ]" : "",
- devinfo.u.device.NCQ_enabled?
- "[NCQ]" : ""
- );
- }
- break;
- }
-
- case LDT_ARRAY:
- if (devinfo.target_id != INVALID_TARGET_ID)
- hptiop_copy_info(pinfo, "[DISK %d_%d] ",
- devinfo.vbus_id, devinfo.target_id);
-
- capacity = le64_to_cpu(devinfo.capacity) * 512;
- do_div(capacity, 1000000);
- hptiop_copy_info(pinfo, "%s (%s), %lluMB, %s\n",
- devinfo.u.array.name,
- devinfo.u.array.array_type==AT_RAID0? "RAID0" :
- devinfo.u.array.array_type==AT_RAID1? "RAID1" :
- devinfo.u.array.array_type==AT_RAID5? "RAID5" :
- devinfo.u.array.array_type==AT_RAID6? "RAID6" :
- devinfo.u.array.array_type==AT_JBOD? "JBOD" :
- "unknown",
- capacity,
- get_array_status(&devinfo));
- for (i = 0; i < devinfo.u.array.ndisk; i++) {
- if (hpt_id_valid(devinfo.u.array.members[i])) {
- if (cpu_to_le16(1<<i) &
- devinfo.u.array.critical_members)
- hptiop_copy_info(pinfo, "\t*");
- hptiop_dump_devinfo(hba, pinfo,
- devinfo.u.array.members[i], indent+1);
- }
- else
- hptiop_copy_info(pinfo, "\tMissing\n");
- }
- if (id == devinfo.u.array.transform_source) {
- hptiop_copy_info(pinfo, "\tExpanding/Migrating to:\n");
- hptiop_dump_devinfo(hba, pinfo,
- devinfo.u.array.transform_target, indent+1);
- }
- break;
- }
-}
-
static ssize_t hptiop_show_version(struct class_device *class_dev, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", driver_ver);
}
-static ssize_t hptiop_cdev_read(struct file *filp, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct hptiop_hba *hba = filp->private_data;
- struct hptiop_getinfo info;
- int i, j, ndev;
- struct hpt_controller_info con_info;
- struct hpt_channel_info chan_info;
- __le32 ids[32];
-
- info.buffer = buf;
- info.buflength = count;
- info.bufoffset = ppos ? *ppos : 0;
- info.filpos = 0;
- info.buffillen = 0;
-
- if (hptiop_get_controller_info(hba, &con_info))
- return -EIO;
-
- for (i = 0; i < con_info.num_buses; i++) {
- if (hptiop_get_channel_info(hba, i, &chan_info) == 0) {
- if (hpt_id_valid(chan_info.devices[0]))
- hptiop_dump_devinfo(hba, &info,
- chan_info.devices[0], 0);
- if (hpt_id_valid(chan_info.devices[1]))
- hptiop_dump_devinfo(hba, &info,
- chan_info.devices[1], 0);
- }
- }
-
- ndev = hptiop_get_logical_devices(hba, ids,
- sizeof(ids) / sizeof(ids[0]));
-
- /*
- * if hptiop_get_logical_devices fails, ndev==-1 and it just
- * output nothing here
- */
- for (j = 0; j < ndev; j++)
- hptiop_dump_devinfo(hba, &info, ids[j], 0);
-
- if (ppos)
- *ppos += info.buffillen;
-
- return info.buffillen;
-}
-
-static int hptiop_cdev_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct hptiop_hba *hba = file->private_data;
- struct hpt_ioctl_u ioctl_u;
- struct hpt_ioctl_k ioctl_k;
- u32 bytes_returned;
- int err = -EINVAL;
-
- if (copy_from_user(&ioctl_u,
- (void __user *)arg, sizeof(struct hpt_ioctl_u)))
- return -EINVAL;
-
- if (ioctl_u.magic != HPT_IOCTL_MAGIC)
- return -EINVAL;
-
- ioctl_k.ioctl_code = ioctl_u.ioctl_code;
- ioctl_k.inbuf = NULL;
- ioctl_k.inbuf_size = ioctl_u.inbuf_size;
- ioctl_k.outbuf = NULL;
- ioctl_k.outbuf_size = ioctl_u.outbuf_size;
- ioctl_k.hba = hba;
- ioctl_k.bytes_returned = &bytes_returned;
-
- /* verify user buffer */
- if ((ioctl_k.inbuf_size && !access_ok(VERIFY_READ,
- ioctl_u.inbuf, ioctl_k.inbuf_size)) ||
- (ioctl_k.outbuf_size && !access_ok(VERIFY_WRITE,
- ioctl_u.outbuf, ioctl_k.outbuf_size)) ||
- (ioctl_u.bytes_returned && !access_ok(VERIFY_WRITE,
- ioctl_u.bytes_returned, sizeof(u32))) ||
- ioctl_k.inbuf_size + ioctl_k.outbuf_size > 0x10000) {
-
- dprintk("scsi%d: got bad user address\n", hba->host->host_no);
- return -EINVAL;
- }
-
- /* map buffer to kernel. */
- if (ioctl_k.inbuf_size) {
- ioctl_k.inbuf = kmalloc(ioctl_k.inbuf_size, GFP_KERNEL);
- if (!ioctl_k.inbuf) {
- dprintk("scsi%d: fail to alloc inbuf\n",
- hba->host->host_no);
- err = -ENOMEM;
- goto err_exit;
- }
-
- if (copy_from_user(ioctl_k.inbuf,
- ioctl_u.inbuf, ioctl_k.inbuf_size)) {
- goto err_exit;
- }
- }
-
- if (ioctl_k.outbuf_size) {
- ioctl_k.outbuf = kmalloc(ioctl_k.outbuf_size, GFP_KERNEL);
- if (!ioctl_k.outbuf) {
- dprintk("scsi%d: fail to alloc outbuf\n",
- hba->host->host_no);
- err = -ENOMEM;
- goto err_exit;
- }
- }
-
- hptiop_do_ioctl(&ioctl_k);
-
- if (ioctl_k.result == HPT_IOCTL_RESULT_OK) {
- if (ioctl_k.outbuf_size &&
- copy_to_user(ioctl_u.outbuf,
- ioctl_k.outbuf, ioctl_k.outbuf_size))
- goto err_exit;
-
- if (ioctl_u.bytes_returned &&
- copy_to_user(ioctl_u.bytes_returned,
- &bytes_returned, sizeof(u32)))
- goto err_exit;
-
- err = 0;
- }
-
-err_exit:
- kfree(ioctl_k.inbuf);
- kfree(ioctl_k.outbuf);
-
- return err;
-}
-
-static int hptiop_cdev_open(struct inode *inode, struct file *file)
-{
- struct hptiop_hba *hba;
- unsigned i = 0, minor = iminor(inode);
- int ret = -ENODEV;
-
- spin_lock(&hptiop_hba_list_lock);
- list_for_each_entry(hba, &hptiop_hba_list, link) {
- if (i == minor) {
- file->private_data = hba;
- ret = 0;
- goto out;
- }
- i++;
- }
-
-out:
- spin_unlock(&hptiop_hba_list_lock);
- return ret;
-}
-
-static struct file_operations hptiop_cdev_fops = {
- .owner = THIS_MODULE,
- .read = hptiop_cdev_read,
- .ioctl = hptiop_cdev_ioctl,
- .open = hptiop_cdev_open,
-};
-
static ssize_t hptiop_show_fw_version(struct class_device *class_dev, char *buf)
{
struct Scsi_Host *host = class_to_shost(class_dev);
@@ -1296,19 +771,13 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
goto unmap_pci_bar;
}
- if (scsi_add_host(host, &pcidev->dev)) {
- printk(KERN_ERR "scsi%d: scsi_add_host failed\n",
- hba->host->host_no);
- goto unmap_pci_bar;
- }
-
pci_set_drvdata(pcidev, host);
if (request_irq(pcidev->irq, hptiop_intr, IRQF_SHARED,
driver_name, hba)) {
printk(KERN_ERR "scsi%d: request irq %d failed\n",
hba->host->host_no, pcidev->irq);
- goto remove_scsi_host;
+ goto unmap_pci_bar;
}
/* Allocate request mem */
@@ -1355,9 +824,12 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev,
if (hptiop_initialize_iop(hba))
goto free_request_mem;
- spin_lock(&hptiop_hba_list_lock);
- list_add_tail(&hba->link, &hptiop_hba_list);
- spin_unlock(&hptiop_hba_list_lock);
+ if (scsi_add_host(host, &pcidev->dev)) {
+ printk(KERN_ERR "scsi%d: scsi_add_host failed\n",
+ hba->host->host_no);
+ goto free_request_mem;
+ }
+
scsi_scan_host(host);
@@ -1372,9 +844,6 @@ free_request_mem:
free_request_irq:
free_irq(hba->pcidev->irq, hba);
-remove_scsi_host:
- scsi_remove_host(host);
-
unmap_pci_bar:
iounmap(hba->iop);
@@ -1422,10 +891,6 @@ static void hptiop_remove(struct pci_dev *pcidev)
scsi_remove_host(host);
- spin_lock(&hptiop_hba_list_lock);
- list_del_init(&hba->link);
- spin_unlock(&hptiop_hba_list_lock);
-
hptiop_shutdown(pcidev);
free_irq(hba->pcidev->irq, hba);
@@ -1462,27 +927,12 @@ static struct pci_driver hptiop_pci_driver = {
static int __init hptiop_module_init(void)
{
- int error;
-
printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver);
-
- error = pci_register_driver(&hptiop_pci_driver);
- if (error < 0)
- return error;
-
- hptiop_cdev_major = register_chrdev(0, "hptiop", &hptiop_cdev_fops);
- if (hptiop_cdev_major < 0) {
- printk(KERN_WARNING "unable to register hptiop device.\n");
- return hptiop_cdev_major;
- }
-
- return 0;
+ return pci_register_driver(&hptiop_pci_driver);
}
static void __exit hptiop_module_exit(void)
{
- dprintk("hptiop_module_exit\n");
- unregister_chrdev(hptiop_cdev_major, "hptiop");
pci_unregister_driver(&hptiop_pci_driver);
}
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index f7b5d7372d2..94d1de55607 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -517,7 +517,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
/* No more interrupts */
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred);
- local_irq_enable();
+ local_irq_enable_in_hardirq();
if (status.b.check)
rq->errors++;
idescsi_end_request (drive, 1, 0);
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 848fb2aa4ca..058f094f945 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -43,13 +43,10 @@
#include "iscsi_tcp.h"
-#define ISCSI_TCP_VERSION "1.0-595"
-
MODULE_AUTHOR("Dmitry Yusupov <dmitry_yus@yahoo.com>, "
"Alex Aizman <itn780@yahoo.com>");
MODULE_DESCRIPTION("iSCSI/TCP data-path");
MODULE_LICENSE("GPL");
-MODULE_VERSION(ISCSI_TCP_VERSION);
/* #define DEBUG_TCP */
#define DEBUG_ASSERT
@@ -185,11 +182,19 @@ iscsi_hdr_extract(struct iscsi_tcp_conn *tcp_conn)
* must be called with session lock
*/
static void
-__iscsi_ctask_cleanup(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
+iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
{
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
+ struct iscsi_r2t_info *r2t;
struct scsi_cmnd *sc;
+ /* flush ctask's r2t queues */
+ while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) {
+ __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
+ sizeof(void*));
+ debug_scsi("iscsi_tcp_cleanup_ctask pending r2t dropped\n");
+ }
+
sc = ctask->sc;
if (unlikely(!sc))
return;
@@ -374,6 +379,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
spin_unlock(&session->lock);
return 0;
}
+
rc = __kfifo_get(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*));
BUG_ON(!rc);
@@ -399,7 +405,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
tcp_ctask->exp_r2tsn = r2tsn + 1;
tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
__kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*));
- __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*));
+ list_move_tail(&ctask->running, &conn->xmitqueue);
scsi_queue_work(session->host, &conn->xmitwork);
conn->r2t_pdus_cnt++;
@@ -477,6 +483,8 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
case ISCSI_OP_SCSI_DATA_IN:
tcp_conn->in.ctask = session->cmds[itt];
rc = iscsi_data_rsp(conn, tcp_conn->in.ctask);
+ if (rc)
+ return rc;
/* fall through */
case ISCSI_OP_SCSI_CMD_RSP:
tcp_conn->in.ctask = session->cmds[itt];
@@ -484,7 +492,7 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
goto copy_hdr;
spin_lock(&session->lock);
- __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask);
+ iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask);
rc = __iscsi_complete_pdu(conn, hdr, NULL, 0);
spin_unlock(&session->lock);
break;
@@ -500,13 +508,28 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn)
break;
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
- case ISCSI_OP_LOGOUT_RSP:
- case ISCSI_OP_NOOP_IN:
case ISCSI_OP_REJECT:
case ISCSI_OP_ASYNC_EVENT:
+ /*
+ * It is possible that we could get a PDU with a buffer larger
+ * than 8K, but there are no targets that currently do this.
+ * For now we fail until we find a vendor that needs it
+ */
+ if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH <
+ tcp_conn->in.datalen) {
+ printk(KERN_ERR "iscsi_tcp: received buffer of len %u "
+ "but conn buffer is only %u (opcode %0x)\n",
+ tcp_conn->in.datalen,
+ DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode);
+ rc = ISCSI_ERR_PROTO;
+ break;
+ }
+
if (tcp_conn->in.datalen)
goto copy_hdr;
/* fall through */
+ case ISCSI_OP_LOGOUT_RSP:
+ case ISCSI_OP_NOOP_IN:
case ISCSI_OP_SCSI_TMFUNC_RSP:
rc = iscsi_complete_pdu(conn, hdr, NULL, 0);
break;
@@ -523,7 +546,7 @@ copy_hdr:
* skbs to complete the command then we have to copy the header
* for later use
*/
- if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <
+ if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <=
(tcp_conn->in.datalen + tcp_conn->in.padding +
(conn->datadgst_en ? 4 : 0))) {
debug_tcp("Copying header for later use. in.copy %d in.datalen"
@@ -614,9 +637,9 @@ iscsi_ctask_copy(struct iscsi_tcp_conn *tcp_conn, struct iscsi_cmd_task *ctask,
* byte counters.
**/
static inline int
-iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn)
+iscsi_tcp_copy(struct iscsi_conn *conn)
{
- void *buf = tcp_conn->data;
+ struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
int buf_size = tcp_conn->in.datalen;
int buf_left = buf_size - tcp_conn->data_copied;
int size = min(tcp_conn->in.copy, buf_left);
@@ -627,7 +650,7 @@ iscsi_tcp_copy(struct iscsi_tcp_conn *tcp_conn)
BUG_ON(size <= 0);
rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset,
- (char*)buf + tcp_conn->data_copied, size);
+ (char*)conn->data + tcp_conn->data_copied, size);
BUG_ON(rc);
tcp_conn->in.offset += size;
@@ -745,10 +768,11 @@ static int iscsi_scsi_data_in(struct iscsi_conn *conn)
done:
/* check for non-exceptional status */
if (tcp_conn->in.hdr->flags & ISCSI_FLAG_DATA_STATUS) {
- debug_scsi("done [sc %lx res %d itt 0x%x]\n",
- (long)sc, sc->result, ctask->itt);
+ debug_scsi("done [sc %lx res %d itt 0x%x flags 0x%x]\n",
+ (long)sc, sc->result, ctask->itt,
+ tcp_conn->in.hdr->flags);
spin_lock(&conn->session->lock);
- __iscsi_ctask_cleanup(conn, ctask);
+ iscsi_tcp_cleanup_ctask(conn, ctask);
__iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0);
spin_unlock(&conn->session->lock);
}
@@ -769,26 +793,25 @@ iscsi_data_recv(struct iscsi_conn *conn)
break;
case ISCSI_OP_SCSI_CMD_RSP:
spin_lock(&conn->session->lock);
- __iscsi_ctask_cleanup(conn, tcp_conn->in.ctask);
+ iscsi_tcp_cleanup_ctask(conn, tcp_conn->in.ctask);
spin_unlock(&conn->session->lock);
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_LOGIN_RSP:
- case ISCSI_OP_NOOP_IN:
case ISCSI_OP_ASYNC_EVENT:
case ISCSI_OP_REJECT:
/*
* Collect data segment to the connection's data
* placeholder
*/
- if (iscsi_tcp_copy(tcp_conn)) {
+ if (iscsi_tcp_copy(conn)) {
rc = -EAGAIN;
goto exit;
}
- rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, tcp_conn->data,
+ rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, conn->data,
tcp_conn->in.datalen);
if (!rc && conn->datadgst_en && opcode != ISCSI_OP_LOGIN_RSP)
- iscsi_recv_digest_update(tcp_conn, tcp_conn->data,
+ iscsi_recv_digest_update(tcp_conn, conn->data,
tcp_conn->in.datalen);
break;
default:
@@ -843,7 +866,7 @@ more:
if (rc == -EAGAIN)
goto nomore;
else {
- iscsi_conn_failure(conn, rc);
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return 0;
}
}
@@ -897,7 +920,7 @@ more:
if (rc) {
if (rc == -EAGAIN)
goto again;
- iscsi_conn_failure(conn, rc);
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return 0;
}
tcp_conn->in.copy -= tcp_conn->in.padding;
@@ -1028,9 +1051,8 @@ iscsi_conn_set_callbacks(struct iscsi_conn *conn)
}
static void
-iscsi_conn_restore_callbacks(struct iscsi_conn *conn)
+iscsi_conn_restore_callbacks(struct iscsi_tcp_conn *tcp_conn)
{
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct sock *sk = tcp_conn->sock->sk;
/* restore socket callbacks, see also: iscsi_conn_set_callbacks() */
@@ -1308,7 +1330,7 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask)
ctask->imm_count -
ctask->unsol_count;
- debug_scsi("cmd [itt %x total %d imm %d imm_data %d "
+ debug_scsi("cmd [itt 0x%x total %d imm %d imm_data %d "
"r2t_data %d]\n",
ctask->itt, ctask->total_length, ctask->imm_count,
ctask->unsol_count, tcp_ctask->r2t_data_count);
@@ -1636,7 +1658,7 @@ handle_xmstate_sol_data(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
}
solicit_again:
/*
- * send Data-Out whitnin this R2T sequence.
+ * send Data-Out within this R2T sequence.
*/
if (!r2t->data_count)
goto data_out_done;
@@ -1731,7 +1753,7 @@ handle_xmstate_w_pad(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct iscsi_data_task *dtask = tcp_ctask->dtask;
- int sent, rc;
+ int sent = 0, rc;
tcp_ctask->xmstate &= ~XMSTATE_W_PAD;
iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad,
@@ -1900,27 +1922,32 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER;
/* initial operational parameters */
tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
- tcp_conn->data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
-
- /* allocate initial PDU receive place holder */
- if (tcp_conn->data_size <= PAGE_SIZE)
- tcp_conn->data = kmalloc(tcp_conn->data_size, GFP_KERNEL);
- else
- tcp_conn->data = (void*)__get_free_pages(GFP_KERNEL,
- get_order(tcp_conn->data_size));
- if (!tcp_conn->data)
- goto max_recv_dlenght_alloc_fail;
return cls_conn;
-max_recv_dlenght_alloc_fail:
- kfree(tcp_conn);
tcp_conn_alloc_fail:
iscsi_conn_teardown(cls_conn);
return NULL;
}
static void
+iscsi_tcp_release_conn(struct iscsi_conn *conn)
+{
+ struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+
+ if (!tcp_conn->sock)
+ return;
+
+ sock_hold(tcp_conn->sock->sk);
+ iscsi_conn_restore_callbacks(tcp_conn);
+ sock_put(tcp_conn->sock->sk);
+
+ sock_release(tcp_conn->sock);
+ tcp_conn->sock = NULL;
+ conn->recv_lock = NULL;
+}
+
+static void
iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *conn = cls_conn->dd_data;
@@ -1930,6 +1957,7 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
if (conn->hdrdgst_en || conn->datadgst_en)
digest = 1;
+ iscsi_tcp_release_conn(conn);
iscsi_conn_teardown(cls_conn);
/* now free tcp_conn */
@@ -1944,15 +1972,18 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
crypto_free_tfm(tcp_conn->data_rx_tfm);
}
- /* free conn->data, size = MaxRecvDataSegmentLength */
- if (tcp_conn->data_size <= PAGE_SIZE)
- kfree(tcp_conn->data);
- else
- free_pages((unsigned long)tcp_conn->data,
- get_order(tcp_conn->data_size));
kfree(tcp_conn);
}
+static void
+iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+
+ iscsi_conn_stop(cls_conn, flag);
+ iscsi_tcp_release_conn(conn);
+}
+
static int
iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session,
struct iscsi_cls_conn *cls_conn, uint64_t transport_eph,
@@ -2001,52 +2032,6 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session,
return 0;
}
-static void
-iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
-{
- struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data;
- struct iscsi_r2t_info *r2t;
-
- /* flush ctask's r2t queues */
- while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)))
- __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t,
- sizeof(void*));
-
- __iscsi_ctask_cleanup(conn, ctask);
-}
-
-static void
-iscsi_tcp_suspend_conn_rx(struct iscsi_conn *conn)
-{
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- struct sock *sk;
-
- if (!tcp_conn->sock)
- return;
-
- sk = tcp_conn->sock->sk;
- write_lock_bh(&sk->sk_callback_lock);
- set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
- write_unlock_bh(&sk->sk_callback_lock);
-}
-
-static void
-iscsi_tcp_terminate_conn(struct iscsi_conn *conn)
-{
- struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
-
- if (!tcp_conn->sock)
- return;
-
- sock_hold(tcp_conn->sock->sk);
- iscsi_conn_restore_callbacks(conn);
- sock_put(tcp_conn->sock->sk);
-
- sock_release(tcp_conn->sock);
- tcp_conn->sock = NULL;
- conn->recv_lock = NULL;
-}
-
/* called with host lock */
static void
iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask,
@@ -2057,6 +2042,7 @@ iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask,
iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr,
sizeof(struct iscsi_hdr));
tcp_mtask->xmstate = XMSTATE_IMM_HDR;
+ tcp_mtask->sent = 0;
if (mtask->data_count)
iscsi_buf_init_iov(&tcp_mtask->sendbuf, (char*)mtask->data,
@@ -2138,39 +2124,6 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
int value;
switch(param) {
- case ISCSI_PARAM_MAX_RECV_DLENGTH: {
- char *saveptr = tcp_conn->data;
- gfp_t flags = GFP_KERNEL;
-
- sscanf(buf, "%d", &value);
- if (tcp_conn->data_size >= value) {
- iscsi_set_param(cls_conn, param, buf, buflen);
- break;
- }
-
- spin_lock_bh(&session->lock);
- if (conn->stop_stage == STOP_CONN_RECOVER)
- flags = GFP_ATOMIC;
- spin_unlock_bh(&session->lock);
-
- if (value <= PAGE_SIZE)
- tcp_conn->data = kmalloc(value, flags);
- else
- tcp_conn->data = (void*)__get_free_pages(flags,
- get_order(value));
- if (tcp_conn->data == NULL) {
- tcp_conn->data = saveptr;
- return -ENOMEM;
- }
- if (tcp_conn->data_size <= PAGE_SIZE)
- kfree(saveptr);
- else
- free_pages((unsigned long)saveptr,
- get_order(tcp_conn->data_size));
- iscsi_set_param(cls_conn, param, buf, buflen);
- tcp_conn->data_size = value;
- break;
- }
case ISCSI_PARAM_HDRDGST_EN:
iscsi_set_param(cls_conn, param, buf, buflen);
tcp_conn->hdr_size = sizeof(struct iscsi_hdr);
@@ -2361,8 +2314,7 @@ static void iscsi_tcp_session_destroy(struct iscsi_cls_session *cls_session)
}
static struct scsi_host_template iscsi_sht = {
- .name = "iSCSI Initiator over TCP/IP, v"
- ISCSI_TCP_VERSION,
+ .name = "iSCSI Initiator over TCP/IP",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
.can_queue = ISCSI_XMIT_CMDS_MAX - 1,
@@ -2414,10 +2366,7 @@ static struct iscsi_transport iscsi_tcp_transport = {
.get_conn_param = iscsi_tcp_conn_get_param,
.get_session_param = iscsi_session_get_param,
.start_conn = iscsi_conn_start,
- .stop_conn = iscsi_conn_stop,
- /* these are called as part of conn recovery */
- .suspend_conn_recv = iscsi_tcp_suspend_conn_rx,
- .terminate_conn = iscsi_tcp_terminate_conn,
+ .stop_conn = iscsi_tcp_conn_stop,
/* IO */
.send_pdu = iscsi_conn_send_pdu,
.get_stats = iscsi_conn_get_stats,
diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h
index 808302832e6..6a4ee704e46 100644
--- a/drivers/scsi/iscsi_tcp.h
+++ b/drivers/scsi/iscsi_tcp.h
@@ -78,8 +78,6 @@ struct iscsi_tcp_conn {
char hdrext[4*sizeof(__u16) +
sizeof(__u32)];
int data_copied;
- char *data; /* data placeholder */
- int data_size; /* actual recv_dlength */
int stop_stage; /* conn_stop() flag: *
* stop to recover, *
* stop to terminate */
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 16fc2dd8f2f..73dd6c8deed 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -2746,7 +2746,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
return rc;
- scontrol = (scontrol & 0x0f0) | 0x302;
+ scontrol = (scontrol & 0x0f0) | 0x304;
if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
return rc;
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7e6e031cc41..5884cd26d53 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -189,6 +189,7 @@ static void iscsi_complete_command(struct iscsi_session *session,
{
struct scsi_cmnd *sc = ctask->sc;
+ ctask->state = ISCSI_TASK_COMPLETED;
ctask->sc = NULL;
list_del_init(&ctask->running);
__kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*));
@@ -275,6 +276,25 @@ out:
return rc;
}
+static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
+{
+ struct iscsi_tm_rsp *tmf = (struct iscsi_tm_rsp *)hdr;
+
+ conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
+ conn->tmfrsp_pdus_cnt++;
+
+ if (conn->tmabort_state != TMABORT_INITIAL)
+ return;
+
+ if (tmf->response == ISCSI_TMF_RSP_COMPLETE)
+ conn->tmabort_state = TMABORT_SUCCESS;
+ else if (tmf->response == ISCSI_TMF_RSP_NO_TASK)
+ conn->tmabort_state = TMABORT_NOT_FOUND;
+ else
+ conn->tmabort_state = TMABORT_FAILED;
+ wake_up(&conn->ehwait);
+}
+
/**
* __iscsi_complete_pdu - complete pdu
* @conn: iscsi conn
@@ -340,6 +360,10 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
switch(opcode) {
case ISCSI_OP_LOGOUT_RSP:
+ if (datalen) {
+ rc = ISCSI_ERR_PROTO;
+ break;
+ }
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
/* fall through */
case ISCSI_OP_LOGIN_RSP:
@@ -348,7 +372,8 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
* login related PDU's exp_statsn is handled in
* userspace
*/
- rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen);
+ if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
+ rc = ISCSI_ERR_CONN_FAILED;
list_del(&mtask->running);
if (conn->login_mtask != mtask)
__kfifo_put(session->mgmtpool.queue,
@@ -360,25 +385,17 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
break;
}
- conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
- conn->tmfrsp_pdus_cnt++;
- if (conn->tmabort_state == TMABORT_INITIAL) {
- conn->tmabort_state =
- ((struct iscsi_tm_rsp *)hdr)->
- response == ISCSI_TMF_RSP_COMPLETE ?
- TMABORT_SUCCESS:TMABORT_FAILED;
- /* unblock eh_abort() */
- wake_up(&conn->ehwait);
- }
+ iscsi_tmf_rsp(conn, hdr);
break;
case ISCSI_OP_NOOP_IN:
- if (hdr->ttt != ISCSI_RESERVED_TAG) {
+ if (hdr->ttt != ISCSI_RESERVED_TAG || datalen) {
rc = ISCSI_ERR_PROTO;
break;
}
conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1;
- rc = iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen);
+ if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
+ rc = ISCSI_ERR_CONN_FAILED;
list_del(&mtask->running);
if (conn->login_mtask != mtask)
__kfifo_put(session->mgmtpool.queue,
@@ -391,14 +408,21 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
} else if (itt == ISCSI_RESERVED_TAG) {
switch(opcode) {
case ISCSI_OP_NOOP_IN:
- if (!datalen) {
- rc = iscsi_check_assign_cmdsn(session,
- (struct iscsi_nopin*)hdr);
- if (!rc && hdr->ttt != ISCSI_RESERVED_TAG)
- rc = iscsi_recv_pdu(conn->cls_conn,
- hdr, NULL, 0);
- } else
+ if (datalen) {
rc = ISCSI_ERR_PROTO;
+ break;
+ }
+
+ rc = iscsi_check_assign_cmdsn(session,
+ (struct iscsi_nopin*)hdr);
+ if (rc)
+ break;
+
+ if (hdr->ttt == ISCSI_RESERVED_TAG)
+ break;
+
+ if (iscsi_recv_pdu(conn->cls_conn, hdr, NULL, 0))
+ rc = ISCSI_ERR_CONN_FAILED;
break;
case ISCSI_OP_REJECT:
/* we need sth like iscsi_reject_rsp()*/
@@ -568,20 +592,24 @@ static int iscsi_data_xmit(struct iscsi_conn *conn)
}
/* process command queue */
- while (__kfifo_get(conn->xmitqueue, (void*)&conn->ctask,
- sizeof(void*))) {
+ spin_lock_bh(&conn->session->lock);
+ while (!list_empty(&conn->xmitqueue)) {
/*
* iscsi tcp may readd the task to the xmitqueue to send
* write data
*/
- spin_lock_bh(&conn->session->lock);
- if (list_empty(&conn->ctask->running))
- list_add_tail(&conn->ctask->running, &conn->run_list);
+ conn->ctask = list_entry(conn->xmitqueue.next,
+ struct iscsi_cmd_task, running);
+ conn->ctask->state = ISCSI_TASK_RUNNING;
+ list_move_tail(conn->xmitqueue.next, &conn->run_list);
spin_unlock_bh(&conn->session->lock);
+
rc = tt->xmit_cmd_task(conn, conn->ctask);
if (rc)
goto again;
+ spin_lock_bh(&conn->session->lock);
}
+ spin_unlock_bh(&conn->session->lock);
/* done with this ctask */
conn->ctask = NULL;
@@ -691,6 +719,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
sc->SCp.phase = session->age;
sc->SCp.ptr = (char *)ctask;
+ ctask->state = ISCSI_TASK_PENDING;
ctask->mtask = NULL;
ctask->conn = conn;
ctask->sc = sc;
@@ -700,7 +729,7 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
session->tt->init_cmd_task(ctask);
- __kfifo_put(conn->xmitqueue, (void*)&ctask, sizeof(void*));
+ list_add_tail(&ctask->running, &conn->xmitqueue);
debug_scsi(
"ctask enq [%s cid %d sc %lx itt 0x%x len %d cmdsn %d win %d]\n",
sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read",
@@ -977,31 +1006,27 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
/*
* xmit mutex and session lock must be held
*/
-#define iscsi_remove_task(tasktype) \
-static struct iscsi_##tasktype * \
-iscsi_remove_##tasktype(struct kfifo *fifo, uint32_t itt) \
-{ \
- int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); \
- struct iscsi_##tasktype *task; \
- \
- debug_scsi("searching %d tasks\n", nr_tasks); \
- \
- for (i = 0; i < nr_tasks; i++) { \
- __kfifo_get(fifo, (void*)&task, sizeof(void*)); \
- debug_scsi("check task %u\n", task->itt); \
- \
- if (task->itt == itt) { \
- debug_scsi("matched task\n"); \
- return task; \
- } \
- \
- __kfifo_put(fifo, (void*)&task, sizeof(void*)); \
- } \
- return NULL; \
-}
+static struct iscsi_mgmt_task *
+iscsi_remove_mgmt_task(struct kfifo *fifo, uint32_t itt)
+{
+ int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*);
+ struct iscsi_mgmt_task *task;
-iscsi_remove_task(mgmt_task);
-iscsi_remove_task(cmd_task);
+ debug_scsi("searching %d tasks\n", nr_tasks);
+
+ for (i = 0; i < nr_tasks; i++) {
+ __kfifo_get(fifo, (void*)&task, sizeof(void*));
+ debug_scsi("check task %u\n", task->itt);
+
+ if (task->itt == itt) {
+ debug_scsi("matched task\n");
+ return task;
+ }
+
+ __kfifo_put(fifo, (void*)&task, sizeof(void*));
+ }
+ return NULL;
+}
static int iscsi_ctask_mtask_cleanup(struct iscsi_cmd_task *ctask)
{
@@ -1027,12 +1052,13 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
{
struct scsi_cmnd *sc;
- conn->session->tt->cleanup_cmd_task(conn, ctask);
- iscsi_ctask_mtask_cleanup(ctask);
-
sc = ctask->sc;
if (!sc)
return;
+
+ conn->session->tt->cleanup_cmd_task(conn, ctask);
+ iscsi_ctask_mtask_cleanup(ctask);
+
sc->result = err;
sc->resid = sc->request_bufflen;
iscsi_complete_command(conn->session, ctask);
@@ -1043,7 +1069,6 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
struct iscsi_conn *conn = ctask->conn;
struct iscsi_session *session = conn->session;
- struct iscsi_cmd_task *pending_ctask;
int rc;
conn->eh_abort_cnt++;
@@ -1061,8 +1086,11 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
goto failed;
/* ctask completed before time out */
- if (!ctask->sc)
- goto success;
+ if (!ctask->sc) {
+ spin_unlock_bh(&session->lock);
+ debug_scsi("sc completed while abort in progress\n");
+ goto success_rel_mutex;
+ }
/* what should we do here ? */
if (conn->ctask == ctask) {
@@ -1071,17 +1099,8 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
goto failed;
}
- /* check for the easy pending cmd abort */
- pending_ctask = iscsi_remove_cmd_task(conn->xmitqueue, ctask->itt);
- if (pending_ctask) {
- /* iscsi_tcp queues write transfers on the xmitqueue */
- if (list_empty(&pending_ctask->running)) {
- debug_scsi("found pending task\n");
- goto success;
- } else
- __kfifo_put(conn->xmitqueue, (void*)&pending_ctask,
- sizeof(void*));
- }
+ if (ctask->state == ISCSI_TASK_PENDING)
+ goto success_cleanup;
conn->tmabort_state = TMABORT_INITIAL;
@@ -1089,25 +1108,31 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
rc = iscsi_exec_abort_task(sc, ctask);
spin_lock_bh(&session->lock);
- iscsi_ctask_mtask_cleanup(ctask);
if (rc || sc->SCp.phase != session->age ||
session->state != ISCSI_STATE_LOGGED_IN)
goto failed;
+ iscsi_ctask_mtask_cleanup(ctask);
- /* ctask completed before tmf abort response */
- if (!ctask->sc) {
- debug_scsi("sc completed while abort in progress\n");
- goto success;
- }
-
- if (conn->tmabort_state != TMABORT_SUCCESS) {
+ switch (conn->tmabort_state) {
+ case TMABORT_SUCCESS:
+ goto success_cleanup;
+ case TMABORT_NOT_FOUND:
+ if (!ctask->sc) {
+ /* ctask completed before tmf abort response */
+ spin_unlock_bh(&session->lock);
+ debug_scsi("sc completed while abort in progress\n");
+ goto success_rel_mutex;
+ }
+ /* fall through */
+ default:
+ /* timedout or failed */
spin_unlock_bh(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
spin_lock_bh(&session->lock);
goto failed;
}
-success:
+success_cleanup:
debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
spin_unlock_bh(&session->lock);
@@ -1121,6 +1146,7 @@ success:
spin_unlock(&session->lock);
write_unlock_bh(conn->recv_lock);
+success_rel_mutex:
mutex_unlock(&conn->xmitmutex);
return SUCCESS;
@@ -1263,6 +1289,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
if (cmd_task_size)
ctask->dd_data = &ctask[1];
ctask->itt = cmd_i;
+ INIT_LIST_HEAD(&ctask->running);
}
spin_lock_init(&session->lock);
@@ -1282,6 +1309,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
if (mgmt_task_size)
mtask->dd_data = &mtask[1];
mtask->itt = ISCSI_MGMT_ITT_OFFSET + cmd_i;
+ INIT_LIST_HEAD(&mtask->running);
}
if (scsi_add_host(shost, NULL))
@@ -1322,15 +1350,18 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
{
struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
+ struct module *owner = cls_session->transport->owner;
scsi_remove_host(shost);
iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds);
iscsi_pool_free(&session->cmdpool, (void**)session->cmds);
+ kfree(session->targetname);
+
iscsi_destroy_session(cls_session);
scsi_host_put(shost);
- module_put(cls_session->transport->owner);
+ module_put(owner);
}
EXPORT_SYMBOL_GPL(iscsi_session_teardown);
@@ -1361,12 +1392,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
conn->tmabort_state = TMABORT_INITIAL;
INIT_LIST_HEAD(&conn->run_list);
INIT_LIST_HEAD(&conn->mgmt_run_list);
-
- /* initialize general xmit PDU commands queue */
- conn->xmitqueue = kfifo_alloc(session->cmds_max * sizeof(void*),
- GFP_KERNEL, NULL);
- if (conn->xmitqueue == ERR_PTR(-ENOMEM))
- goto xmitqueue_alloc_fail;
+ INIT_LIST_HEAD(&conn->xmitqueue);
/* initialize general immediate & non-immediate PDU commands queue */
conn->immqueue = kfifo_alloc(session->mgmtpool_max * sizeof(void*),
@@ -1394,7 +1420,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL);
if (!data)
goto login_mtask_data_alloc_fail;
- conn->login_mtask->data = data;
+ conn->login_mtask->data = conn->data = data;
init_timer(&conn->tmabort_timer);
mutex_init(&conn->xmitmutex);
@@ -1410,8 +1436,6 @@ login_mtask_alloc_fail:
mgmtqueue_alloc_fail:
kfifo_free(conn->immqueue);
immqueue_alloc_fail:
- kfifo_free(conn->xmitqueue);
-xmitqueue_alloc_fail:
iscsi_destroy_conn(cls_conn);
return NULL;
}
@@ -1432,12 +1456,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
mutex_lock(&conn->xmitmutex);
- if (conn->c_stage == ISCSI_CONN_INITIAL_STAGE) {
- if (session->tt->suspend_conn_recv)
- session->tt->suspend_conn_recv(conn);
-
- session->tt->terminate_conn(conn);
- }
spin_lock_bh(&session->lock);
conn->c_stage = ISCSI_CONN_CLEANUP_WAIT;
@@ -1474,7 +1492,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
}
spin_lock_bh(&session->lock);
- kfree(conn->login_mtask->data);
+ kfree(conn->data);
+ kfree(conn->persistent_address);
__kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask,
sizeof(void*));
list_del(&conn->item);
@@ -1489,7 +1508,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
session->cmdsn = session->max_cmdsn = session->exp_cmdsn = 1;
spin_unlock_bh(&session->lock);
- kfifo_free(conn->xmitqueue);
kfifo_free(conn->immqueue);
kfifo_free(conn->mgmtqueue);
@@ -1572,7 +1590,7 @@ static void fail_all_commands(struct iscsi_conn *conn)
struct iscsi_cmd_task *ctask, *tmp;
/* flush pending */
- while (__kfifo_get(conn->xmitqueue, (void*)&ctask, sizeof(void*))) {
+ list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) {
debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc,
ctask->itt);
fail_command(conn, ctask, DID_BUS_BUSY << 16);
@@ -1615,8 +1633,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
spin_unlock_bh(&session->lock);
- if (session->tt->suspend_conn_recv)
- session->tt->suspend_conn_recv(conn);
+ write_lock_bh(conn->recv_lock);
+ set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+ write_unlock_bh(conn->recv_lock);
mutex_lock(&conn->xmitmutex);
/*
@@ -1635,7 +1654,6 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
}
}
- session->tt->terminate_conn(conn);
/*
* flush queues.
*/
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 5c68cdd8736..d384c16f4a8 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -222,7 +222,7 @@ lpfc_issue_lip(struct Scsi_Host *host)
pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
pmboxq->mb.mbxOwner = OWN_HOST;
- mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+ mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
@@ -884,7 +884,7 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
phba->sysfs_mbox.mbox == NULL ) {
sysfs_mbox_idle(phba);
spin_unlock_irq(host->host_lock);
- return -EINVAL;
+ return -EAGAIN;
}
}
@@ -1000,14 +1000,15 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
spin_unlock_irq(phba->host->host_lock);
rc = lpfc_sli_issue_mbox_wait (phba,
phba->sysfs_mbox.mbox,
- phba->fc_ratov * 2);
+ lpfc_mbox_tmo_val(phba,
+ phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
spin_lock_irq(phba->host->host_lock);
}
if (rc != MBX_SUCCESS) {
sysfs_mbox_idle(phba);
spin_unlock_irq(host->host_lock);
- return -ENODEV;
+ return (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV;
}
phba->sysfs_mbox.state = SMBOX_READING;
}
@@ -1016,7 +1017,7 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
printk(KERN_WARNING "mbox_read: Bad State\n");
sysfs_mbox_idle(phba);
spin_unlock_irq(host->host_lock);
- return -EINVAL;
+ return -EAGAIN;
}
memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
@@ -1210,8 +1211,10 @@ lpfc_get_stats(struct Scsi_Host *shost)
struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
struct lpfc_sli *psli = &phba->sli;
struct fc_host_statistics *hs = &phba->link_stats;
+ struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
+ unsigned long seconds;
int rc = 0;
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -1272,22 +1275,103 @@ lpfc_get_stats(struct Scsi_Host *shost)
hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
hs->error_frames = pmb->un.varRdLnk.crcCnt;
+ hs->link_failure_count -= lso->link_failure_count;
+ hs->loss_of_sync_count -= lso->loss_of_sync_count;
+ hs->loss_of_signal_count -= lso->loss_of_signal_count;
+ hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count;
+ hs->invalid_tx_word_count -= lso->invalid_tx_word_count;
+ hs->invalid_crc_count -= lso->invalid_crc_count;
+ hs->error_frames -= lso->error_frames;
+
if (phba->fc_topology == TOPOLOGY_LOOP) {
hs->lip_count = (phba->fc_eventTag >> 1);
+ hs->lip_count -= lso->link_events;
hs->nos_count = -1;
} else {
hs->lip_count = -1;
hs->nos_count = (phba->fc_eventTag >> 1);
+ hs->nos_count -= lso->link_events;
}
hs->dumped_frames = -1;
-/* FIX ME */
- /*hs->SecondsSinceLastReset = (jiffies - lpfc_loadtime) / HZ;*/
+ seconds = get_seconds();
+ if (seconds < psli->stats_start)
+ hs->seconds_since_last_reset = seconds +
+ ((unsigned long)-1 - psli->stats_start);
+ else
+ hs->seconds_since_last_reset = seconds - psli->stats_start;
return hs;
}
+static void
+lpfc_reset_stats(struct Scsi_Host *shost)
+{
+ struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;
+ LPFC_MBOXQ_t *pmboxq;
+ MAILBOX_t *pmb;
+ int rc = 0;
+
+ pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmboxq)
+ return;
+ memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+
+ pmb = &pmboxq->mb;
+ pmb->mbxCommand = MBX_READ_STATUS;
+ pmb->mbxOwner = OWN_HOST;
+ pmb->un.varWords[0] = 0x1; /* reset request */
+ pmboxq->context1 = NULL;
+
+ if ((phba->fc_flag & FC_OFFLINE_MODE) ||
+ (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+
+ if (rc != MBX_SUCCESS) {
+ if (rc == MBX_TIMEOUT)
+ pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ else
+ mempool_free(pmboxq, phba->mbox_mem_pool);
+ return;
+ }
+
+ memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
+ pmb->mbxCommand = MBX_READ_LNK_STAT;
+ pmb->mbxOwner = OWN_HOST;
+ pmboxq->context1 = NULL;
+
+ if ((phba->fc_flag & FC_OFFLINE_MODE) ||
+ (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
+
+ if (rc != MBX_SUCCESS) {
+ if (rc == MBX_TIMEOUT)
+ pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ else
+ mempool_free( pmboxq, phba->mbox_mem_pool);
+ return;
+ }
+
+ lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
+ lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;
+ lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;
+ lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;
+ lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
+ lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
+ lso->error_frames = pmb->un.varRdLnk.crcCnt;
+ lso->link_events = (phba->fc_eventTag >> 1);
+
+ psli->stats_start = get_seconds();
+
+ return;
+}
/*
* The LPFC driver treats linkdown handling as target loss events so there
@@ -1431,8 +1515,7 @@ struct fc_function_template lpfc_transport_functions = {
*/
.get_fc_host_stats = lpfc_get_stats,
-
- /* the LPFC driver doesn't support resetting stats yet */
+ .reset_fc_host_stats = lpfc_reset_stats,
.dd_fcrport_size = sizeof(struct lpfc_rport_data),
.show_rport_maxframe_size = 1,
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 517e9e4dd46..2a176467f71 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -127,6 +127,7 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
int lpfc_mem_alloc(struct lpfc_hba *);
void lpfc_mem_free(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index b65ee57af53..bbb7310210b 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -131,6 +131,7 @@ lpfc_ct_unsol_event(struct lpfc_hba * phba,
}
ct_unsol_event_exit_piocbq:
+ list_del(&head);
if (pmbuf) {
list_for_each_entry_safe(matp, next_matp, &pmbuf->list, list) {
lpfc_mbuf_free(phba, matp->virt, matp->phys);
@@ -481,7 +482,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
if (CTrsp->CommandResponse.bits.CmdRsp ==
be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) {
lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
- "%d:0239 NameServer Rsp "
+ "%d:0208 NameServer Rsp "
"Data: x%x\n",
phba->brd_no,
phba->fc_flag);
@@ -588,13 +589,9 @@ lpfc_get_hba_sym_node_name(struct lpfc_hba * phba, uint8_t * symbp)
lpfc_decode_firmware_rev(phba, fwrev, 0);
- if (phba->Port[0]) {
- sprintf(symbp, "Emulex %s Port %s FV%s DV%s", phba->ModelName,
- phba->Port, fwrev, lpfc_release_version);
- } else {
- sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName,
- fwrev, lpfc_release_version);
- }
+ sprintf(symbp, "Emulex %s FV%s DV%s", phba->ModelName,
+ fwrev, lpfc_release_version);
+ return;
}
/*
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b89f6cb641e..3567de61316 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1848,9 +1848,12 @@ static void
lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
struct lpfc_iocbq * rspiocb)
{
+ IOCB_t *irsp;
struct lpfc_nodelist *ndlp;
LPFC_MBOXQ_t *mbox = NULL;
+ irsp = &rspiocb->iocb;
+
ndlp = (struct lpfc_nodelist *) cmdiocb->context1;
if (cmdiocb->context_un.mbox)
mbox = cmdiocb->context_un.mbox;
@@ -1893,9 +1896,15 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
mempool_free( mbox, phba->mbox_mem_pool);
} else {
mempool_free( mbox, phba->mbox_mem_pool);
- if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) {
- lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
- ndlp = NULL;
+ /* Do not call NO_LIST for lpfc_els_abort'ed ELS cmds */
+ if (!((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ ((irsp->un.ulpWord[4] == IOERR_SLI_ABORTED) ||
+ (irsp->un.ulpWord[4] == IOERR_LINK_DOWN) ||
+ (irsp->un.ulpWord[4] == IOERR_SLI_DOWN)))) {
+ if (ndlp->nlp_flag & NLP_ACC_REGLOGIN) {
+ lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+ ndlp = NULL;
+ }
}
}
}
@@ -2839,7 +2848,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
/* Xmit ELS RPS ACC response tag <ulpIoTag> */
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
- "%d:0128 Xmit ELS RPS ACC response tag x%x "
+ "%d:0118 Xmit ELS RPS ACC response tag x%x "
"Data: x%x x%x x%x x%x x%x\n",
phba->brd_no,
elsiocb->iocb.ulpIoTag,
@@ -2948,7 +2957,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_hba * phba, uint16_t cmdsize,
/* Xmit ELS RPL ACC response tag <ulpIoTag> */
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
- "%d:0128 Xmit ELS RPL ACC response tag x%x "
+ "%d:0120 Xmit ELS RPL ACC response tag x%x "
"Data: x%x x%x x%x x%x x%x\n",
phba->brd_no,
elsiocb->iocb.ulpIoTag,
@@ -3109,7 +3118,7 @@ lpfc_els_rcv_fan(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
struct lpfc_nodelist *ndlp, *next_ndlp;
/* FAN received */
- lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:265 FAN received\n",
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS, "%d:0265 FAN received\n",
phba->brd_no);
icmd = &cmdiocb->iocb;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 4d6cf990c4f..b2f1552f184 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1557,6 +1557,8 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp)
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
}
}
+
+ spin_lock_irq(phba->host->host_lock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
@@ -1569,6 +1571,7 @@ lpfc_freenode(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp)
mempool_free(mb, phba->mbox_mem_pool);
}
}
+ spin_unlock_irq(phba->host->host_lock);
lpfc_els_abort(phba,ndlp,0);
spin_lock_irq(phba->host->host_lock);
@@ -1782,7 +1785,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
/* LOG change to REGLOGIN */
/* FIND node DID reglogin */
lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
- "%d:0931 FIND node DID reglogin"
+ "%d:0901 FIND node DID reglogin"
" Data: x%p x%x x%x x%x\n",
phba->brd_no,
ndlp, ndlp->nlp_DID,
@@ -1805,7 +1808,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
/* LOG change to PRLI */
/* FIND node DID prli */
lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
- "%d:0931 FIND node DID prli "
+ "%d:0902 FIND node DID prli "
"Data: x%p x%x x%x x%x\n",
phba->brd_no,
ndlp, ndlp->nlp_DID,
@@ -1828,7 +1831,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
/* LOG change to NPR */
/* FIND node DID npr */
lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
- "%d:0931 FIND node DID npr "
+ "%d:0903 FIND node DID npr "
"Data: x%p x%x x%x x%x\n",
phba->brd_no,
ndlp, ndlp->nlp_DID,
@@ -1851,7 +1854,7 @@ lpfc_findnode_did(struct lpfc_hba * phba, uint32_t order, uint32_t did)
/* LOG change to UNUSED */
/* FIND node DID unused */
lpfc_printf_log(phba, KERN_INFO, LOG_NODE,
- "%d:0931 FIND node DID unused "
+ "%d:0905 FIND node DID unused "
"Data: x%p x%x x%x x%x\n",
phba->brd_no,
ndlp, ndlp->nlp_DID,
@@ -2335,7 +2338,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba)
initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!initlinkmbox) {
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "%d:0226 Device Discovery "
+ "%d:0206 Device Discovery "
"completion error\n",
phba->brd_no);
phba->hba_state = LPFC_HBA_ERROR;
@@ -2365,7 +2368,7 @@ lpfc_disc_timeout_handler(struct lpfc_hba *phba)
if (!clearlambox) {
clrlaerr = 1;
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "%d:0226 Device Discovery "
+ "%d:0207 Device Discovery "
"completion error\n",
phba->brd_no);
phba->hba_state = LPFC_HBA_ERROR;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ef47b824cbe..f6948ffe689 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1379,6 +1379,7 @@ lpfc_offline(struct lpfc_hba * phba)
/* stop all timers associated with this hba */
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
+ phba->work_ha = 0;
lpfc_printf_log(phba,
KERN_WARNING,
@@ -1616,7 +1617,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
goto out_free_iocbq;
}
- /* We can rely on a queue depth attribute only after SLI HBA setup */
+ /*
+ * Set initial can_queue value since 0 is no longer supported and
+ * scsi_add_host will fail. This will be adjusted later based on the
+ * max xri value determined in hba setup.
+ */
host->can_queue = phba->cfg_hba_queue_depth - 10;
/* Tell the midlayer we support 16 byte commands */
@@ -1656,6 +1661,12 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
goto out_free_irq;
}
+ /*
+ * hba setup may have changed the hba_queue_depth so we need to adjust
+ * the value of can_queue.
+ */
+ host->can_queue = phba->cfg_hba_queue_depth - 10;
+
lpfc_discovery_wait(phba);
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index e42f22aaf71..4d016c2a1b2 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -651,3 +651,19 @@ lpfc_mbox_get(struct lpfc_hba * phba)
return mbq;
}
+
+int
+lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
+{
+ switch (cmd) {
+ case MBX_WRITE_NV: /* 0x03 */
+ case MBX_UPDATE_CFG: /* 0x1B */
+ case MBX_DOWN_LOAD: /* 0x1C */
+ case MBX_DEL_LD_ENTRY: /* 0x1D */
+ case MBX_LOAD_AREA: /* 0x81 */
+ case MBX_FLASH_WR_ULA: /* 0x98 */
+ case MBX_LOAD_EXP_ROM: /* 0x9C */
+ return LPFC_MBOX_TMO_FLASH_CMD;
+ }
+ return LPFC_MBOX_TMO;
+}
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index bd0b0e293d6..20449a8dd53 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -179,7 +179,7 @@ lpfc_els_abort(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp,
/* Abort outstanding I/O on NPort <nlp_DID> */
lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
- "%d:0201 Abort outstanding I/O on NPort x%x "
+ "%d:0205 Abort outstanding I/O on NPort x%x "
"Data: x%x x%x x%x\n",
phba->brd_no, ndlp->nlp_DID, ndlp->nlp_flag,
ndlp->nlp_state, ndlp->nlp_rpi);
@@ -393,6 +393,20 @@ lpfc_rcv_plogi(struct lpfc_hba * phba,
mbox->context2 = ndlp;
ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI);
+ /*
+ * If there is an outstanding PLOGI issued, abort it before
+ * sending ACC rsp for received PLOGI. If pending plogi
+ * is not canceled here, the plogi will be rejected by
+ * remote port and will be retried. On a configuration with
+ * single discovery thread, this will cause a huge delay in
+ * discovery. Also this will cause multiple state machines
+ * running in parallel for this node.
+ */
+ if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) {
+ /* software abort outstanding PLOGI */
+ lpfc_els_abort(phba, ndlp, 1);
+ }
+
lpfc_els_rsp_acc(phba, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox, 0);
return 1;
@@ -1601,7 +1615,13 @@ lpfc_rcv_padisc_npr_node(struct lpfc_hba * phba,
lpfc_rcv_padisc(phba, ndlp, cmdiocb);
- if (!(ndlp->nlp_flag & NLP_DELAY_TMO)) {
+ /*
+ * Do not start discovery if discovery is about to start
+ * or discovery in progress for this node. Starting discovery
+ * here will affect the counting of discovery threads.
+ */
+ if ((!(ndlp->nlp_flag & NLP_DELAY_TMO)) &&
+ (ndlp->nlp_flag & NLP_NPR_2B_DISC)){
if (ndlp->nlp_flag & NLP_NPR_ADISC) {
ndlp->nlp_prev_state = NLP_STE_NPR_NODE;
ndlp->nlp_state = NLP_STE_ADISC_ISSUE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index a760a44173d..a8816a8738f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -21,6 +21,7 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -841,6 +842,21 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
return 0;
}
+static void
+lpfc_block_error_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+ spin_lock_irq(shost->host_lock);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irq(shost->host_lock);
+ msleep(1000);
+ spin_lock_irq(shost->host_lock);
+ }
+ spin_unlock_irq(shost->host_lock);
+ return;
+}
static int
lpfc_abort_handler(struct scsi_cmnd *cmnd)
@@ -855,6 +871,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
unsigned int loop_count = 0;
int ret = SUCCESS;
+ lpfc_block_error_handler(cmnd);
spin_lock_irq(shost->host_lock);
lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
@@ -957,6 +974,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
int ret = FAILED;
int cnt, loopcnt;
+ lpfc_block_error_handler(cmnd);
spin_lock_irq(shost->host_lock);
/*
* If target is not in a MAPPED state, delay the reset until
@@ -1073,6 +1091,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
int cnt, loopcnt;
struct lpfc_scsi_buf * lpfc_cmd;
+ lpfc_block_error_handler(cmnd);
spin_lock_irq(shost->host_lock);
lpfc_cmd = lpfc_get_scsi_buf(phba);
@@ -1104,7 +1123,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
ndlp->rport->dd_data);
if (ret != SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
- "%d:0713 Bus Reset on target %d failed\n",
+ "%d:0700 Bus Reset on target %d failed\n",
phba->brd_no, i);
err_count++;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 350a625fa22..70f4d5a1348 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -320,7 +320,8 @@ lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
kfree(old_arr);
return iotag;
}
- }
+ } else
+ spin_unlock_irq(phba->host->host_lock);
lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
"%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n",
@@ -969,9 +970,11 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba)
* resources need to be recovered.
*/
if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
- printk(KERN_INFO "%s: IOCB cmd 0x%x processed."
- " Skipping completion\n", __FUNCTION__,
- irsp->ulpCommand);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "%d:0314 IOCB cmd 0x%x"
+ " processed. Skipping"
+ " completion", phba->brd_no,
+ irsp->ulpCommand);
break;
}
@@ -1104,7 +1107,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
if (unlikely(irsp->ulpStatus)) {
/* Rsp ring <ringno> error: IOCB */
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "%d:0326 Rsp Ring %d error: IOCB Data: "
+ "%d:0336 Rsp Ring %d error: IOCB Data: "
"x%x x%x x%x x%x x%x x%x x%x x%x\n",
phba->brd_no, pring->ringno,
irsp->un.ulpWord[0], irsp->un.ulpWord[1],
@@ -1122,9 +1125,11 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
* resources need to be recovered.
*/
if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
- printk(KERN_INFO "%s: IOCB cmd 0x%x processed. "
- "Skipping completion\n", __FUNCTION__,
- irsp->ulpCommand);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "%d:0333 IOCB cmd 0x%x"
+ " processed. Skipping"
+ " completion\n", phba->brd_no,
+ irsp->ulpCommand);
break;
}
@@ -1155,7 +1160,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
} else {
/* Unknown IOCB command */
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0321 Unknown IOCB command "
+ "%d:0334 Unknown IOCB command "
"Data: x%x, x%x x%x x%x x%x\n",
phba->brd_no, type, irsp->ulpCommand,
irsp->ulpStatus, irsp->ulpIoTag,
@@ -1238,7 +1243,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
lpfc_printf_log(phba,
KERN_ERR,
LOG_SLI,
- "%d:0312 Ring %d handler: portRspPut %d "
+ "%d:0303 Ring %d handler: portRspPut %d "
"is bigger then rsp ring %d\n",
phba->brd_no,
pring->ringno, portRspPut, portRspMax);
@@ -1383,7 +1388,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
lpfc_printf_log(phba,
KERN_ERR,
LOG_SLI,
- "%d:0321 Unknown IOCB command "
+ "%d:0335 Unknown IOCB command "
"Data: x%x x%x x%x x%x\n",
phba->brd_no,
irsp->ulpCommand,
@@ -1399,11 +1404,11 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
next_iocb,
&saveq->list,
list) {
+ list_del(&rspiocbp->list);
lpfc_sli_release_iocbq(phba,
rspiocbp);
}
}
-
lpfc_sli_release_iocbq(phba, saveq);
}
}
@@ -1711,15 +1716,13 @@ lpfc_sli_brdreset(struct lpfc_hba * phba)
phba->fc_myDID = 0;
phba->fc_prevDID = 0;
- psli->sli_flag = 0;
-
/* Turn off parity checking and serr during the physical reset */
pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
pci_write_config_word(phba->pcidev, PCI_COMMAND,
(cfg_value &
~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
/* Now toggle INITFF bit in the Host Control Register */
writel(HC_INITFF, phba->HCregaddr);
mdelay(1);
@@ -1760,7 +1763,7 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
/* Restart HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "%d:0328 Restart HBA Data: x%x x%x\n", phba->brd_no,
+ "%d:0337 Restart HBA Data: x%x x%x\n", phba->brd_no,
phba->hba_state, psli->sli_flag);
word0 = 0;
@@ -1792,6 +1795,9 @@ lpfc_sli_brdrestart(struct lpfc_hba * phba)
spin_unlock_irq(phba->host->host_lock);
+ memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+ psli->stats_start = get_seconds();
+
if (skip_post)
mdelay(100);
else
@@ -1902,6 +1908,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba)
}
while (resetcount < 2 && !done) {
+ spin_lock_irq(phba->host->host_lock);
+ phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irq(phba->host->host_lock);
phba->hba_state = LPFC_STATE_UNKNOWN;
lpfc_sli_brdrestart(phba);
msleep(2500);
@@ -1909,6 +1918,9 @@ lpfc_sli_hba_setup(struct lpfc_hba * phba)
if (rc)
break;
+ spin_lock_irq(phba->host->host_lock);
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irq(phba->host->host_lock);
resetcount++;
/* Call pre CONFIG_PORT mailbox command initialization. A value of 0
@@ -2194,7 +2206,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
return (MBX_NOT_FINISHED);
}
/* timeout active mbox command */
- mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO);
+ mod_timer(&psli->mbox_tmo, (jiffies +
+ (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
}
/* Mailbox cmd <cmd> issue */
@@ -2254,7 +2267,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
break;
case MBX_POLL:
- i = 0;
psli->mbox_active = NULL;
if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
/* First read mbox status word */
@@ -2268,11 +2280,14 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
/* Read the HBA Host Attention Register */
ha_copy = readl(phba->HAregaddr);
+ i = lpfc_mbox_tmo_val(phba, mb->mbxCommand);
+ i *= 1000; /* Convert to ms */
+
/* Wait for command to complete */
while (((word0 & OWN_CHIP) == OWN_CHIP) ||
(!(ha_copy & HA_MBATT) &&
(phba->hba_state > LPFC_WARM_START))) {
- if (i++ >= 100) {
+ if (i-- <= 0) {
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
spin_unlock_irqrestore(phba->host->host_lock,
drvr_flag);
@@ -2290,7 +2305,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
/* Can be in interrupt context, do not sleep */
/* (or might be called with interrupts disabled) */
- mdelay(i);
+ mdelay(1);
spin_lock_irqsave(phba->host->host_lock, drvr_flag);
@@ -3005,7 +3020,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
if (timeleft == 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "%d:0329 IOCB wait timeout error - no "
+ "%d:0338 IOCB wait timeout error - no "
"wake response Data x%x\n",
phba->brd_no, timeout);
retval = IOCB_TIMEDOUT;
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index d8ef0d2894d..e26de680935 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -172,6 +172,18 @@ struct lpfc_sli_stat {
uint32_t mbox_busy; /* Mailbox cmd busy */
};
+/* Structure to store link status values when port stats are reset */
+struct lpfc_lnk_stat {
+ uint32_t link_failure_count;
+ uint32_t loss_of_sync_count;
+ uint32_t loss_of_signal_count;
+ uint32_t prim_seq_protocol_err_count;
+ uint32_t invalid_tx_word_count;
+ uint32_t invalid_crc_count;
+ uint32_t error_frames;
+ uint32_t link_events;
+};
+
/* Structure used to hold SLI information */
struct lpfc_sli {
uint32_t num_rings;
@@ -201,6 +213,8 @@ struct lpfc_sli {
struct lpfc_iocbq ** iocbq_lookup; /* array to lookup IOCB by IOTAG */
size_t iocbq_lookup_len; /* current lengs of the array */
uint16_t last_iotag; /* last allocated IOTAG */
+ unsigned long stats_start; /* in seconds */
+ struct lpfc_lnk_stat lnk_stat_offsets;
};
/* Given a pointer to the start of the ring, and the slot number of
@@ -211,3 +225,9 @@ struct lpfc_sli {
#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox
command */
+#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write
+ * or erase cmds. This is especially
+ * long because of the potential of
+ * multiple flash erases that can be
+ * spawned.
+ */
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 10e89c6ae82..c7091ea29f3 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.1.7"
+#define LPFC_DRIVER_VERSION "8.1.9"
#define LPFC_DRIVER_NAME "lpfc"
diff --git a/drivers/scsi/megaraid/mega_common.h b/drivers/scsi/megaraid/mega_common.h
index 4675343228a..8cd0bd1d0f7 100644
--- a/drivers/scsi/megaraid/mega_common.h
+++ b/drivers/scsi/megaraid/mega_common.h
@@ -37,6 +37,12 @@
#define LSI_MAX_CHANNELS 16
#define LSI_MAX_LOGICAL_DRIVES_64LD (64+1)
+#define HBA_SIGNATURE_64_BIT 0x299
+#define PCI_CONF_AMISIG64 0xa4
+
+#define MEGA_SCSI_INQ_EVPD 1
+#define MEGA_INVALID_FIELD_IN_CDB 0x24
+
/**
* scb_t - scsi command control block
diff --git a/drivers/scsi/megaraid/megaraid_ioctl.h b/drivers/scsi/megaraid/megaraid_ioctl.h
index bdaee144a1c..b8aa34202ec 100644
--- a/drivers/scsi/megaraid/megaraid_ioctl.h
+++ b/drivers/scsi/megaraid/megaraid_ioctl.h
@@ -132,6 +132,10 @@ typedef struct uioc {
/* Driver Data: */
void __user * user_data;
uint32_t user_data_len;
+
+ /* 64bit alignment */
+ uint32_t pad_for_64bit_align;
+
mraid_passthru_t __user *user_pthru;
mraid_passthru_t *pthru32;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 92715130ac0..cd982c877da 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mbox.c
- * Version : v2.20.4.8 (Apr 11 2006)
+ * Version : v2.20.4.9 (Jul 16 2006)
*
* Authors:
* Atul Mukker <Atul.Mukker@lsil.com>
@@ -720,6 +720,7 @@ megaraid_init_mbox(adapter_t *adapter)
struct pci_dev *pdev;
mraid_device_t *raid_dev;
int i;
+ uint32_t magic64;
adapter->ito = MBOX_TIMEOUT;
@@ -863,12 +864,33 @@ megaraid_init_mbox(adapter_t *adapter)
// Set the DMA mask to 64-bit. All supported controllers as capable of
// DMA in this range
- if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) {
-
- con_log(CL_ANN, (KERN_WARNING
- "megaraid: could not set DMA mask for 64-bit.\n"));
+ pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64);
+
+ if (((magic64 == HBA_SIGNATURE_64_BIT) &&
+ ((adapter->pdev->subsystem_device !=
+ PCI_SUBSYS_ID_MEGARAID_SATA_150_6) ||
+ (adapter->pdev->subsystem_device !=
+ PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) ||
+ (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+ adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
+ (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+ adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
+ (adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+ adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) ||
+ (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
+ adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
+ (adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
+ adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) {
+ if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) {
+ con_log(CL_ANN, (KERN_WARNING
+ "megaraid: DMA mask for 64-bit failed\n"));
- goto out_free_sysfs_res;
+ if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) {
+ con_log(CL_ANN, (KERN_WARNING
+ "megaraid: 32-bit DMA mask failed\n"));
+ goto out_free_sysfs_res;
+ }
+ }
}
// setup tasklet for DPC
@@ -1622,6 +1644,14 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
rdev->last_disp |= (1L << SCP2CHANNEL(scp));
}
+ if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) {
+ scp->sense_buffer[0] = 0x70;
+ scp->sense_buffer[2] = ILLEGAL_REQUEST;
+ scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB;
+ scp->result = CHECK_CONDITION << 1;
+ return NULL;
+ }
+
/* Fall through */
case READ_CAPACITY:
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 868fb0ec93e..2b5a3285f79 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
#include "megaraid_ioctl.h"
-#define MEGARAID_VERSION "2.20.4.8"
-#define MEGARAID_EXT_VERSION "(Release Date: Mon Apr 11 12:27:22 EST 2006)"
+#define MEGARAID_VERSION "2.20.4.9"
+#define MEGARAID_EXT_VERSION "(Release Date: Sun Jul 16 12:27:22 EST 2006)"
/*
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index e8f534fb336..d85b9a8f1b8 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mm.c
- * Version : v2.20.2.6 (Mar 7 2005)
+ * Version : v2.20.2.7 (Jul 16 2006)
*
* Common management module
*/
diff --git a/drivers/scsi/megaraid/megaraid_mm.h b/drivers/scsi/megaraid/megaraid_mm.h
index 3d9e67d6849..c8762b2b8ed 100644
--- a/drivers/scsi/megaraid/megaraid_mm.h
+++ b/drivers/scsi/megaraid/megaraid_mm.h
@@ -27,9 +27,9 @@
#include "megaraid_ioctl.h"
-#define LSI_COMMON_MOD_VERSION "2.20.2.6"
+#define LSI_COMMON_MOD_VERSION "2.20.2.7"
#define LSI_COMMON_MOD_EXT_VERSION \
- "(Release Date: Mon Mar 7 00:01:03 EST 2005)"
+ "(Release Date: Sun Jul 16 00:01:03 EST 2006)"
#define LSI_DBGLVL dbglevel
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index d1f38c32aa1..efc8fff1d25 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -183,7 +183,8 @@ static struct ata_port_info adma_port_info[] = {
{
.sht = &adma_ata_sht,
.host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO,
+ ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
+ ATA_FLAG_PIO_POLLING,
.pio_mask = 0x10, /* pio4 */
.udma_mask = 0x1f, /* udma0-4 */
.port_ops = &adma_ata_ops,
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 139ea0e27fd..0930260aec2 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -487,6 +487,7 @@ typedef struct {
#define MBA_IP_RCV_BUFFER_EMPTY 0x8026 /* IP receive buffer queue empty. */
#define MBA_IP_HDR_DATA_SPLIT 0x8027 /* IP header/data splitting feature */
/* used. */
+#define MBA_TRACE_NOTIFICATION 0x8028 /* Trace/Diagnostic notification. */
#define MBA_POINT_TO_POINT 0x8030 /* Point to point mode. */
#define MBA_CMPLT_1_16BIT 0x8031 /* Completion 1 16bit IOSB. */
#define MBA_CMPLT_2_16BIT 0x8032 /* Completion 2 16bit IOSB. */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9758dba9554..859649160ca 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3063,6 +3063,7 @@ qla2x00_update_fcports(scsi_qla_host_t *ha)
int
qla2x00_abort_isp(scsi_qla_host_t *ha)
{
+ int rval;
unsigned long flags = 0;
uint16_t cnt;
srb_t *sp;
@@ -3119,6 +3120,16 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags);
+
+ if (ha->eft) {
+ rval = qla2x00_trace_control(ha, TC_ENABLE,
+ ha->eft_dma, EFT_NUM_BUFFERS);
+ if (rval) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to reinitialize EFT "
+ "(%d).\n", rval);
+ }
+ }
} else { /* failed the ISP abort */
ha->flags.online = 1;
if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 2b60a27eff0..c5b3c610a32 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -471,6 +471,7 @@ __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun,
mrk24->nport_handle = cpu_to_le16(loop_id);
mrk24->lun[1] = LSB(lun);
mrk24->lun[2] = MSB(lun);
+ host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
} else {
SET_TARGET_ID(ha, mrk->target, loop_id);
mrk->lun = cpu_to_le16(lun);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 795bf15b1b8..de0613135f7 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -587,6 +587,11 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb)
DEBUG2(printk("scsi(%ld): Discard RND Frame -- %04x %04x "
"%04x.\n", ha->host_no, mb[1], mb[2], mb[3]));
break;
+
+ case MBA_TRACE_NOTIFICATION:
+ DEBUG2(printk("scsi(%ld): Trace Notification -- %04x %04x.\n",
+ ha->host_no, mb[1], mb[2]));
+ break;
}
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index ec7ebb6037e..65cbe2f5eea 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -744,7 +744,6 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- srb_t *sp;
int ret;
unsigned int id, lun;
unsigned long serial;
@@ -755,8 +754,7 @@ qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
lun = cmd->device->lun;
serial = cmd->serial_number;
- sp = (srb_t *) CMD_SP(cmd);
- if (!sp || !fcport)
+ if (!fcport)
return ret;
qla_printk(KERN_INFO, ha,
@@ -875,7 +873,6 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- srb_t *sp;
int ret;
unsigned int id, lun;
unsigned long serial;
@@ -886,8 +883,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
lun = cmd->device->lun;
serial = cmd->serial_number;
- sp = (srb_t *) CMD_SP(cmd);
- if (!sp || !fcport)
+ if (!fcport)
return ret;
qla_printk(KERN_INFO, ha,
@@ -936,7 +932,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- srb_t *sp;
int ret;
unsigned int id, lun;
unsigned long serial;
@@ -947,8 +942,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
lun = cmd->device->lun;
serial = cmd->serial_number;
- sp = (srb_t *) CMD_SP(cmd);
- if (!sp || !fcport)
+ if (!fcport)
return ret;
qla_printk(KERN_INFO, ha,
@@ -2244,9 +2238,6 @@ qla2x00_do_dpc(void *data)
next_loopid = 0;
list_for_each_entry(fcport, &ha->fcports, list) {
- if (fcport->port_type != FCT_TARGET)
- continue;
-
/*
* If the port is not ONLINE then try to login
* to it if we haven't run out of retries.
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index d2d68344065..971259032ef 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.01.05-k3"
+#define QLA2XXX_VERSION "8.01.07-k1"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 1
-#define QLA_DRIVER_PATCH_VER 5
+#define QLA_DRIVER_PATCH_VER 7
#define QLA_DRIVER_BETA_VER 0
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 03baec2191b..01d40369a8a 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -74,6 +74,7 @@ enum {
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void vt6420_error_handler(struct ata_port *ap);
static const struct pci_device_id svia_pci_tbl[] = {
{ 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
@@ -107,7 +108,38 @@ static struct scsi_host_template svia_sht = {
.bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations svia_sata_ops = {
+static const struct ata_port_operations vt6420_sata_ops = {
+ .port_disable = ata_port_disable,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = vt6420_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+static const struct ata_port_operations vt6421_sata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
@@ -141,13 +173,13 @@ static const struct ata_port_operations svia_sata_ops = {
.host_stop = ata_host_stop,
};
-static struct ata_port_info svia_port_info = {
+static struct ata_port_info vt6420_port_info = {
.sht = &svia_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x7f,
- .port_ops = &svia_sata_ops,
+ .port_ops = &vt6420_sata_ops,
};
MODULE_AUTHOR("Jeff Garzik");
@@ -170,6 +202,81 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
}
+/**
+ * vt6420_prereset - prereset for vt6420
+ * @ap: target ATA port
+ *
+ * SCR registers on vt6420 are pieces of shit and may hang the
+ * whole machine completely if accessed with the wrong timing.
+ * To avoid such catastrophe, vt6420 doesn't provide generic SCR
+ * access operations, but uses SStatus and SControl only during
+ * boot probing in controlled way.
+ *
+ * As the old (pre EH update) probing code is proven to work, we
+ * strictly follow the access pattern.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+static int vt6420_prereset(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ unsigned long timeout = jiffies + (HZ * 5);
+ u32 sstatus, scontrol;
+ int online;
+
+ /* don't do any SCR stuff if we're not loading */
+ if (!ATA_PFLAG_LOADING)
+ goto skip_scr;
+
+ /* Resume phy. This is the old resume sequence from
+ * __sata_phy_reset().
+ */
+ svia_scr_write(ap, SCR_CONTROL, 0x300);
+ svia_scr_read(ap, SCR_CONTROL); /* flush */
+
+ /* wait for phy to become ready, if necessary */
+ do {
+ msleep(200);
+ if ((svia_scr_read(ap, SCR_STATUS) & 0xf) != 1)
+ break;
+ } while (time_before(jiffies, timeout));
+
+ /* open code sata_print_link_status() */
+ sstatus = svia_scr_read(ap, SCR_STATUS);
+ scontrol = svia_scr_read(ap, SCR_CONTROL);
+
+ online = (sstatus & 0xf) == 0x3;
+
+ ata_port_printk(ap, KERN_INFO,
+ "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
+ online ? "up" : "down", sstatus, scontrol);
+
+ /* SStatus is read one more time */
+ svia_scr_read(ap, SCR_STATUS);
+
+ if (!online) {
+ /* tell EH to bail */
+ ehc->i.action &= ~ATA_EH_RESET_MASK;
+ return 0;
+ }
+
+ skip_scr:
+ /* wait for !BSY */
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+
+ return 0;
+}
+
+static void vt6420_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset,
+ NULL, ata_std_postreset);
+}
+
static const unsigned int svia_bar_sizes[] = {
8, 4, 8, 4, 16, 256
};
@@ -210,7 +317,7 @@ static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
{
struct ata_probe_ent *probe_ent;
- struct ata_port_info *ppi = &svia_port_info;
+ struct ata_port_info *ppi = &vt6420_port_info;
probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
if (!probe_ent)
@@ -239,7 +346,7 @@ static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
probe_ent->sht = &svia_sht;
probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY;
- probe_ent->port_ops = &svia_sata_ops;
+ probe_ent->port_ops = &vt6421_sata_ops;
probe_ent->n_ports = N_PORTS;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 6a5b731bd5b..a8ed5a22009 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -460,7 +460,8 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
* Return value:
* SUCCESS or FAILED or NEEDS_RETRY
**/
-static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense)
+static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
+ int cmnd_size, int timeout, int copy_sense)
{
struct scsi_device *sdev = scmd->device;
struct Scsi_Host *shost = sdev->host;
@@ -490,6 +491,9 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout, int copy_sense
old_cmd_len = scmd->cmd_len;
old_use_sg = scmd->use_sg;
+ memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
+ memcpy(scmd->cmnd, cmnd, cmnd_size);
+
if (copy_sense) {
int gfp_mask = GFP_ATOMIC;
@@ -610,8 +614,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd)
static unsigned char generic_sense[6] =
{REQUEST_SENSE, 0, 0, 0, 252, 0};
- memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense));
- return scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 1);
+ return scsi_send_eh_cmnd(scmd, generic_sense, 6, SENSE_TIMEOUT, 1);
}
/**
@@ -736,10 +739,7 @@ static int scsi_eh_tur(struct scsi_cmnd *scmd)
int retry_cnt = 1, rtn;
retry_tur:
- memcpy(scmd->cmnd, tur_command, sizeof(tur_command));
-
-
- rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT, 0);
+ rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0);
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n",
__FUNCTION__, scmd, rtn));
@@ -839,8 +839,8 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
if (scmd->device->allow_restart) {
int rtn;
- memcpy(scmd->cmnd, stu_command, sizeof(stu_command));
- rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT, 0);
+ rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
+ START_UNIT_TIMEOUT, 0);
if (rtn == SUCCESS)
return 0;
}
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 7b9e8fa1a4e..2ecd1418857 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -34,6 +34,7 @@
#define ISCSI_SESSION_ATTRS 11
#define ISCSI_CONN_ATTRS 11
#define ISCSI_HOST_ATTRS 0
+#define ISCSI_TRANSPORT_VERSION "1.1-646"
struct iscsi_internal {
int daemon_pid;
@@ -634,13 +635,13 @@ mempool_zone_get_skb(struct mempool_zone *zone)
}
static int
-iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb)
+iscsi_broadcast_skb(struct mempool_zone *zone, struct sk_buff *skb, gfp_t gfp)
{
unsigned long flags;
int rc;
skb_get(skb);
- rc = netlink_broadcast(nls, skb, 0, 1, GFP_KERNEL);
+ rc = netlink_broadcast(nls, skb, 0, 1, gfp);
if (rc < 0) {
mempool_free(skb, zone->pool);
printk(KERN_ERR "iscsi: can not broadcast skb (%d)\n", rc);
@@ -749,7 +750,7 @@ void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error)
ev->r.connerror.cid = conn->cid;
ev->r.connerror.sid = iscsi_conn_get_sid(conn);
- iscsi_broadcast_skb(conn->z_error, skb);
+ iscsi_broadcast_skb(conn->z_error, skb, GFP_ATOMIC);
dev_printk(KERN_INFO, &conn->dev, "iscsi: detected conn error (%d)\n",
error);
@@ -895,7 +896,7 @@ int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn)
* this will occur if the daemon is not up, so we just warn
* the user and when the daemon is restarted it will handle it
*/
- rc = iscsi_broadcast_skb(conn->z_pdu, skb);
+ rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL);
if (rc < 0)
dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
"session destruction event. Check iscsi daemon\n");
@@ -958,7 +959,7 @@ int iscsi_if_create_session_done(struct iscsi_cls_conn *conn)
* this will occur if the daemon is not up, so we just warn
* the user and when the daemon is restarted it will handle it
*/
- rc = iscsi_broadcast_skb(conn->z_pdu, skb);
+ rc = iscsi_broadcast_skb(conn->z_pdu, skb, GFP_KERNEL);
if (rc < 0)
dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of "
"session creation event. Check iscsi daemon\n");
@@ -1613,6 +1614,9 @@ static __init int iscsi_transport_init(void)
{
int err;
+ printk(KERN_INFO "Loading iSCSI transport class v%s.",
+ ISCSI_TRANSPORT_VERSION);
+
err = class_register(&iscsi_transport_class);
if (err)
return err;
@@ -1678,3 +1682,4 @@ MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, "
"Alex Aizman <itn780@yahoo.com>");
MODULE_DESCRIPTION("iSCSI Transport Interface");
MODULE_LICENSE("GPL");
+MODULE_VERSION(ISCSI_TRANSPORT_VERSION);
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 65eef33846b..34f9343ed0a 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -18,8 +18,8 @@
*
*/
-static int sg_version_num = 30533; /* 2 digits for each component */
-#define SG_VERSION_STR "3.5.33"
+static int sg_version_num = 30534; /* 2 digits for each component */
+#define SG_VERSION_STR "3.5.34"
/*
* D. P. Gilbert (dgilbert@interlog.com, dougg@triode.net.au), notes:
@@ -60,7 +60,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */
#ifdef CONFIG_SCSI_PROC_FS
#include <linux/proc_fs.h>
-static char *sg_version_date = "20050908";
+static char *sg_version_date = "20060818";
static int sg_proc_init(void);
static void sg_proc_cleanup(void);
@@ -1164,7 +1164,7 @@ sg_vma_nopage(struct vm_area_struct *vma, unsigned long addr, int *type)
len = vma->vm_end - sa;
len = (len < sg->length) ? len : sg->length;
if (offset < len) {
- page = sg->page;
+ page = virt_to_page(page_address(sg->page) + offset);
get_page(page); /* increment page count */
break;
}
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8c505076c0e..739d3ef46a4 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -2084,7 +2084,7 @@ static struct pci_device_id sym2_id_table[] __devinitdata = {
{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL },
{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895,
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index dc673e1b6fd..cfe20f73043 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -886,6 +886,15 @@ static int sunsab_console_setup(struct console *con, char *options)
unsigned long flags;
unsigned int baud, quot;
+ /*
+ * The console framework calls us for each and every port
+ * registered. Defer the console setup until the requested
+ * port has been properly discovered. A bit of a hack,
+ * though...
+ */
+ if (up->port.type != PORT_SUNSAB)
+ return -1;
+
printk("Console: ttyS%d (SAB82532)\n",
(sunsab_reg.minor - 64) + con->index);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 47bc3d57e01..d34f336d53d 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1146,6 +1146,9 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
unsigned long flags;
int baud, brg;
+ if (up->port.type != PORT_SUNZILOG)
+ return -1;
+
printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
(sunzilog_reg.minor - 64) + con->index, con->index);
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index a4062a6adbb..9c46746d5d0 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -208,7 +208,7 @@ static int cypress_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
- dev_err(&dev->udev->dev, "Out of memory!\n");
+ dev_err(&interface->dev, "Out of memory!\n");
goto error;
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index efbbc0adb89..65e4d046951 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -79,7 +79,6 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
- { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
{ } /* Terminating entry */
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a692ac66ca6..55195e76eb6 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -82,10 +82,6 @@
#define SPEEDDRAGON_VENDOR_ID 0x0e55
#define SPEEDDRAGON_PRODUCT_ID 0x110b
-/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
-#define OTI_VENDOR_ID 0x0ea0
-#define OTI_PRODUCT_ID 0x6858
-
/* DATAPILOT Universal-2 Phone Cable */
#define DATAPILOT_U2_VENDOR_ID 0x0731
#define DATAPILOT_U2_PRODUCT_ID 0x2003
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fd158e063c0..4a803d69fa3 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1261,7 +1261,7 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
*/
-UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
diff --git a/drivers/video/imacfb.c b/drivers/video/imacfb.c
index b485bece5fc..18ea4a54910 100644
--- a/drivers/video/imacfb.c
+++ b/drivers/video/imacfb.c
@@ -71,10 +71,10 @@ static int set_system(struct dmi_system_id *id)
static struct dmi_system_id __initdata dmi_system_table[] = {
{ set_system, "iMac4,1", {
DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
- DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17},
+ DMI_MATCH(DMI_PRODUCT_NAME,"iMac4,1") }, (void*)M_I17},
{ set_system, "MacBookPro1,1", {
DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
- DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17},
+ DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro1,1") }, (void*)M_I17},
{ set_system, "MacBook1,1", {
DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK},
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 440272ad10e..7c76e079ca7 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -331,7 +331,15 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
tmp |= M1064_XPIXCLKCTRL_PLL_UP;
}
matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
+#ifdef __powerpc__
+ /* This is necessary to avoid jitter on PowerPC
+ * (OpenFirmware) systems, but apparently
+ * introduces jitter, at least on a x86-64
+ * using DVI.
+ * A simple workaround is disable for non-PPC.
+ */
matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
+#endif /* __powerpc__ */
matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
matroxfb_DAC_unlock_irqrestore(flags);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 37534573960..045f98854f1 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -884,6 +884,61 @@ void bd_set_size(struct block_device *bdev, loff_t size)
}
EXPORT_SYMBOL(bd_set_size);
+static int __blkdev_put(struct block_device *bdev, unsigned int subclass)
+{
+ int ret = 0;
+ struct inode *bd_inode = bdev->bd_inode;
+ struct gendisk *disk = bdev->bd_disk;
+
+ mutex_lock_nested(&bdev->bd_mutex, subclass);
+ lock_kernel();
+ if (!--bdev->bd_openers) {
+ sync_blockdev(bdev);
+ kill_bdev(bdev);
+ }
+ if (bdev->bd_contains == bdev) {
+ if (disk->fops->release)
+ ret = disk->fops->release(bd_inode, NULL);
+ } else {
+ mutex_lock_nested(&bdev->bd_contains->bd_mutex,
+ subclass + 1);
+ bdev->bd_contains->bd_part_count--;
+ mutex_unlock(&bdev->bd_contains->bd_mutex);
+ }
+ if (!bdev->bd_openers) {
+ struct module *owner = disk->fops->owner;
+
+ put_disk(disk);
+ module_put(owner);
+
+ if (bdev->bd_contains != bdev) {
+ kobject_put(&bdev->bd_part->kobj);
+ bdev->bd_part = NULL;
+ }
+ bdev->bd_disk = NULL;
+ bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
+ if (bdev != bdev->bd_contains)
+ __blkdev_put(bdev->bd_contains, subclass + 1);
+ bdev->bd_contains = NULL;
+ }
+ unlock_kernel();
+ mutex_unlock(&bdev->bd_mutex);
+ bdput(bdev);
+ return ret;
+}
+
+int blkdev_put(struct block_device *bdev)
+{
+ return __blkdev_put(bdev, BD_MUTEX_NORMAL);
+}
+EXPORT_SYMBOL(blkdev_put);
+
+int blkdev_put_partition(struct block_device *bdev)
+{
+ return __blkdev_put(bdev, BD_MUTEX_PARTITION);
+}
+EXPORT_SYMBOL(blkdev_put_partition);
+
static int
blkdev_get_whole(struct block_device *bdev, mode_t mode, unsigned flags);
@@ -980,7 +1035,7 @@ out_first:
bdev->bd_disk = NULL;
bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
if (bdev != bdev->bd_contains)
- blkdev_put(bdev->bd_contains);
+ __blkdev_put(bdev->bd_contains, BD_MUTEX_WHOLE);
bdev->bd_contains = NULL;
put_disk(disk);
module_put(owner);
@@ -1079,63 +1134,6 @@ static int blkdev_open(struct inode * inode, struct file * filp)
return res;
}
-static int __blkdev_put(struct block_device *bdev, unsigned int subclass)
-{
- int ret = 0;
- struct inode *bd_inode = bdev->bd_inode;
- struct gendisk *disk = bdev->bd_disk;
-
- mutex_lock_nested(&bdev->bd_mutex, subclass);
- lock_kernel();
- if (!--bdev->bd_openers) {
- sync_blockdev(bdev);
- kill_bdev(bdev);
- }
- if (bdev->bd_contains == bdev) {
- if (disk->fops->release)
- ret = disk->fops->release(bd_inode, NULL);
- } else {
- mutex_lock_nested(&bdev->bd_contains->bd_mutex,
- subclass + 1);
- bdev->bd_contains->bd_part_count--;
- mutex_unlock(&bdev->bd_contains->bd_mutex);
- }
- if (!bdev->bd_openers) {
- struct module *owner = disk->fops->owner;
-
- put_disk(disk);
- module_put(owner);
-
- if (bdev->bd_contains != bdev) {
- kobject_put(&bdev->bd_part->kobj);
- bdev->bd_part = NULL;
- }
- bdev->bd_disk = NULL;
- bdev->bd_inode->i_data.backing_dev_info = &default_backing_dev_info;
- if (bdev != bdev->bd_contains)
- __blkdev_put(bdev->bd_contains, subclass + 1);
- bdev->bd_contains = NULL;
- }
- unlock_kernel();
- mutex_unlock(&bdev->bd_mutex);
- bdput(bdev);
- return ret;
-}
-
-int blkdev_put(struct block_device *bdev)
-{
- return __blkdev_put(bdev, BD_MUTEX_NORMAL);
-}
-
-EXPORT_SYMBOL(blkdev_put);
-
-int blkdev_put_partition(struct block_device *bdev)
-{
- return __blkdev_put(bdev, BD_MUTEX_PARTITION);
-}
-
-EXPORT_SYMBOL(blkdev_put_partition);
-
static int blkdev_close(struct inode * inode, struct file * filp)
{
struct block_device *bdev = I_BDEV(filp->f_mapping->host);
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 19ffb043abb..3a3567433b9 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1168,7 +1168,7 @@ static int ep_unlink(struct eventpoll *ep, struct epitem *epi)
eexit_1:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_unlink(%p, %p) = %d\n",
- current, ep, epi->file, error));
+ current, ep, epi->ffd.file, error));
return error;
}
@@ -1236,7 +1236,7 @@ static int ep_poll_callback(wait_queue_t *wait, unsigned mode, int sync, void *k
struct eventpoll *ep = epi->ep;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: poll_callback(%p) epi=%p ep=%p\n",
- current, epi->file, epi, ep));
+ current, epi->ffd.file, epi, ep));
write_lock_irqsave(&ep->lock, flags);
diff --git a/fs/exec.c b/fs/exec.c
index 8344ba73a2a..54135df2a96 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -486,8 +486,6 @@ struct file *open_exec(const char *name)
if (!(nd.mnt->mnt_flags & MNT_NOEXEC) &&
S_ISREG(inode->i_mode)) {
int err = vfs_permission(&nd, MAY_EXEC);
- if (!err && !(inode->i_mode & 0111))
- err = -EACCES;
file = ERR_PTR(err);
if (!err) {
file = nameidata_to_filp(&nd, O_RDONLY);
@@ -753,7 +751,7 @@ no_thread_group:
write_lock_irq(&tasklist_lock);
spin_lock(&oldsighand->siglock);
- spin_lock(&newsighand->siglock);
+ spin_lock_nested(&newsighand->siglock, SINGLE_DEPTH_NESTING);
rcu_assign_pointer(current->sighand, newsighand);
recalc_sigpending();
@@ -922,12 +920,6 @@ int prepare_binprm(struct linux_binprm *bprm)
int retval;
mode = inode->i_mode;
- /*
- * Check execute perms again - if the caller has CAP_DAC_OVERRIDE,
- * generic_permission lets a non-executable through
- */
- if (!(mode & 0111)) /* with at least _one_ execute bit set */
- return -EACCES;
if (bprm->file->f_op == NULL)
return -EACCES;
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index f2702cda977..681dea8f953 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -775,7 +775,7 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
if (EXT2_INODE_SIZE(sb) == 0)
goto cantfind_ext2;
sbi->s_inodes_per_block = sb->s_blocksize / EXT2_INODE_SIZE(sb);
- if (sbi->s_inodes_per_block == 0)
+ if (sbi->s_inodes_per_block == 0 || sbi->s_inodes_per_group == 0)
goto cantfind_ext2;
sbi->s_itb_per_group = sbi->s_inodes_per_group /
sbi->s_inodes_per_block;
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index a504a40d6d2..063d994bda0 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -1269,12 +1269,12 @@ ext3_fsblk_t ext3_new_blocks(handle_t *handle, struct inode *inode,
goal = le32_to_cpu(es->s_first_data_block);
group_no = (goal - le32_to_cpu(es->s_first_data_block)) /
EXT3_BLOCKS_PER_GROUP(sb);
+ goal_group = group_no;
+retry_alloc:
gdp = ext3_get_group_desc(sb, group_no, &gdp_bh);
if (!gdp)
goto io_error;
- goal_group = group_no;
-retry:
free_blocks = le16_to_cpu(gdp->bg_free_blocks_count);
/*
* if there is not enough free blocks to make a new resevation
@@ -1349,7 +1349,7 @@ retry:
if (my_rsv) {
my_rsv = NULL;
group_no = goal_group;
- goto retry;
+ goto retry_alloc;
}
/* No space left on the device */
*errp = -ENOSPC;
diff --git a/fs/ioprio.c b/fs/ioprio.c
index 93aa5715f22..78b1deae3fa 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -44,6 +44,9 @@ static int set_task_ioprio(struct task_struct *task, int ioprio)
task->ioprio = ioprio;
ioc = task->io_context;
+ /* see wmb() in current_io_context() */
+ smp_read_barrier_depends();
+
if (ioc && ioc->set_ioprio)
ioc->set_ioprio(ioc, ioprio);
@@ -111,9 +114,9 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
continue;
ret = set_task_ioprio(p, ioprio);
if (ret)
- break;
+ goto free_uid;
} while_each_thread(g, p);
-
+free_uid:
if (who)
free_uid(user);
break;
@@ -137,6 +140,29 @@ out:
return ret;
}
+int ioprio_best(unsigned short aprio, unsigned short bprio)
+{
+ unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
+ unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
+
+ if (!ioprio_valid(aprio))
+ return bprio;
+ if (!ioprio_valid(bprio))
+ return aprio;
+
+ if (aclass == IOPRIO_CLASS_NONE)
+ aclass = IOPRIO_CLASS_BE;
+ if (bclass == IOPRIO_CLASS_NONE)
+ bclass = IOPRIO_CLASS_BE;
+
+ if (aclass == bclass)
+ return min(aprio, bprio);
+ if (aclass > bclass)
+ return bprio;
+ else
+ return aprio;
+}
+
asmlinkage long sys_ioprio_get(int which, int who)
{
struct task_struct *g, *p;
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index 0971814c38b..42da6078431 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -261,7 +261,7 @@ void journal_commit_transaction(journal_t *journal)
struct buffer_head *bh = jh2bh(jh);
jbd_lock_bh_state(bh);
- kfree(jh->b_committed_data);
+ jbd_slab_free(jh->b_committed_data, bh->b_size);
jh->b_committed_data = NULL;
jbd_unlock_bh_state(bh);
}
@@ -745,14 +745,14 @@ restart_loop:
* Otherwise, we can just throw away the frozen data now.
*/
if (jh->b_committed_data) {
- kfree(jh->b_committed_data);
+ jbd_slab_free(jh->b_committed_data, bh->b_size);
jh->b_committed_data = NULL;
if (jh->b_frozen_data) {
jh->b_committed_data = jh->b_frozen_data;
jh->b_frozen_data = NULL;
}
} else if (jh->b_frozen_data) {
- kfree(jh->b_frozen_data);
+ jbd_slab_free(jh->b_frozen_data, bh->b_size);
jh->b_frozen_data = NULL;
}
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 8c9b28dff11..f66724ce443 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -84,6 +84,7 @@ EXPORT_SYMBOL(journal_force_commit);
static int journal_convert_superblock_v1(journal_t *, journal_superblock_t *);
static void __journal_abort_soft (journal_t *journal, int errno);
+static int journal_create_jbd_slab(size_t slab_size);
/*
* Helper function used to manage commit timeouts
@@ -328,10 +329,10 @@ repeat:
char *tmp;
jbd_unlock_bh_state(bh_in);
- tmp = jbd_rep_kmalloc(bh_in->b_size, GFP_NOFS);
+ tmp = jbd_slab_alloc(bh_in->b_size, GFP_NOFS);
jbd_lock_bh_state(bh_in);
if (jh_in->b_frozen_data) {
- kfree(tmp);
+ jbd_slab_free(tmp, bh_in->b_size);
goto repeat;
}
@@ -1069,17 +1070,17 @@ static int load_superblock(journal_t *journal)
int journal_load(journal_t *journal)
{
int err;
+ journal_superblock_t *sb;
err = load_superblock(journal);
if (err)
return err;
+ sb = journal->j_superblock;
/* If this is a V2 superblock, then we have to check the
* features flags on it. */
if (journal->j_format_version >= 2) {
- journal_superblock_t *sb = journal->j_superblock;
-
if ((sb->s_feature_ro_compat &
~cpu_to_be32(JFS_KNOWN_ROCOMPAT_FEATURES)) ||
(sb->s_feature_incompat &
@@ -1090,6 +1091,13 @@ int journal_load(journal_t *journal)
}
}
+ /*
+ * Create a slab for this blocksize
+ */
+ err = journal_create_jbd_slab(cpu_to_be32(sb->s_blocksize));
+ if (err)
+ return err;
+
/* Let the recovery code check whether it needs to recover any
* data from the journal. */
if (journal_recover(journal))
@@ -1612,6 +1620,77 @@ void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry)
}
/*
+ * jbd slab management: create 1k, 2k, 4k, 8k slabs as needed
+ * and allocate frozen and commit buffers from these slabs.
+ *
+ * Reason for doing this is to avoid, SLAB_DEBUG - since it could
+ * cause bh to cross page boundary.
+ */
+
+#define JBD_MAX_SLABS 5
+#define JBD_SLAB_INDEX(size) (size >> 11)
+
+static kmem_cache_t *jbd_slab[JBD_MAX_SLABS];
+static const char *jbd_slab_names[JBD_MAX_SLABS] = {
+ "jbd_1k", "jbd_2k", "jbd_4k", NULL, "jbd_8k"
+};
+
+static void journal_destroy_jbd_slabs(void)
+{
+ int i;
+
+ for (i = 0; i < JBD_MAX_SLABS; i++) {
+ if (jbd_slab[i])
+ kmem_cache_destroy(jbd_slab[i]);
+ jbd_slab[i] = NULL;
+ }
+}
+
+static int journal_create_jbd_slab(size_t slab_size)
+{
+ int i = JBD_SLAB_INDEX(slab_size);
+
+ BUG_ON(i >= JBD_MAX_SLABS);
+
+ /*
+ * Check if we already have a slab created for this size
+ */
+ if (jbd_slab[i])
+ return 0;
+
+ /*
+ * Create a slab and force alignment to be same as slabsize -
+ * this will make sure that allocations won't cross the page
+ * boundary.
+ */
+ jbd_slab[i] = kmem_cache_create(jbd_slab_names[i],
+ slab_size, slab_size, 0, NULL, NULL);
+ if (!jbd_slab[i]) {
+ printk(KERN_EMERG "JBD: no memory for jbd_slab cache\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+void * jbd_slab_alloc(size_t size, gfp_t flags)
+{
+ int idx;
+
+ idx = JBD_SLAB_INDEX(size);
+ BUG_ON(jbd_slab[idx] == NULL);
+ return kmem_cache_alloc(jbd_slab[idx], flags | __GFP_NOFAIL);
+}
+
+void jbd_slab_free(void *ptr, size_t size)
+{
+ int idx;
+
+ idx = JBD_SLAB_INDEX(size);
+ BUG_ON(jbd_slab[idx] == NULL);
+ kmem_cache_free(jbd_slab[idx], ptr);
+}
+
+/*
* Journal_head storage management
*/
static kmem_cache_t *journal_head_cache;
@@ -1799,13 +1878,13 @@ static void __journal_remove_journal_head(struct buffer_head *bh)
printk(KERN_WARNING "%s: freeing "
"b_frozen_data\n",
__FUNCTION__);
- kfree(jh->b_frozen_data);
+ jbd_slab_free(jh->b_frozen_data, bh->b_size);
}
if (jh->b_committed_data) {
printk(KERN_WARNING "%s: freeing "
"b_committed_data\n",
__FUNCTION__);
- kfree(jh->b_committed_data);
+ jbd_slab_free(jh->b_committed_data, bh->b_size);
}
bh->b_private = NULL;
jh->b_bh = NULL; /* debug, really */
@@ -1961,6 +2040,7 @@ static void journal_destroy_caches(void)
journal_destroy_revoke_caches();
journal_destroy_journal_head_cache();
journal_destroy_handle_cache();
+ journal_destroy_jbd_slabs();
}
static int __init journal_init(void)
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 508b2ea91f4..de2e4cbbf79 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -666,8 +666,9 @@ repeat:
if (!frozen_buffer) {
JBUFFER_TRACE(jh, "allocate memory for buffer");
jbd_unlock_bh_state(bh);
- frozen_buffer = jbd_kmalloc(jh2bh(jh)->b_size,
- GFP_NOFS);
+ frozen_buffer =
+ jbd_slab_alloc(jh2bh(jh)->b_size,
+ GFP_NOFS);
if (!frozen_buffer) {
printk(KERN_EMERG
"%s: OOM for frozen_buffer\n",
@@ -879,7 +880,7 @@ int journal_get_undo_access(handle_t *handle, struct buffer_head *bh)
repeat:
if (!jh->b_committed_data) {
- committed_data = jbd_kmalloc(jh2bh(jh)->b_size, GFP_NOFS);
+ committed_data = jbd_slab_alloc(jh2bh(jh)->b_size, GFP_NOFS);
if (!committed_data) {
printk(KERN_EMERG "%s: No memory for committed data\n",
__FUNCTION__);
@@ -906,7 +907,7 @@ repeat:
out:
journal_put_journal_head(jh);
if (unlikely(committed_data))
- kfree(committed_data);
+ jbd_slab_free(committed_data, bh->b_size);
return err;
}
diff --git a/fs/lockd/svcsubs.c b/fs/lockd/svcsubs.c
index 2a4df9b3779..01b4db9e546 100644
--- a/fs/lockd/svcsubs.c
+++ b/fs/lockd/svcsubs.c
@@ -237,19 +237,22 @@ static int
nlm_traverse_files(struct nlm_host *host, int action)
{
struct nlm_file *file, **fp;
- int i;
+ int i, ret = 0;
mutex_lock(&nlm_file_mutex);
for (i = 0; i < FILE_NRHASH; i++) {
fp = nlm_files + i;
while ((file = *fp) != NULL) {
+ file->f_count++;
+ mutex_unlock(&nlm_file_mutex);
+
/* Traverse locks, blocks and shares of this file
* and update file->f_locks count */
- if (nlm_inspect_file(host, file, action)) {
- mutex_unlock(&nlm_file_mutex);
- return 1;
- }
+ if (nlm_inspect_file(host, file, action))
+ ret = 1;
+ mutex_lock(&nlm_file_mutex);
+ file->f_count--;
/* No more references to this file. Let go of it. */
if (!file->f_blocks && !file->f_locks
&& !file->f_shares && !file->f_count) {
@@ -262,7 +265,7 @@ nlm_traverse_files(struct nlm_host *host, int action)
}
}
mutex_unlock(&nlm_file_mutex);
- return 0;
+ return ret;
}
/*
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index 9ea91c5eeb7..330ff9fc7cf 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -204,6 +204,8 @@ static int minix_fill_super(struct super_block *s, void *data, int silent)
/*
* Allocate the buffer map to keep the superblock small.
*/
+ if (sbi->s_imap_blocks == 0 || sbi->s_zmap_blocks == 0)
+ goto out_illegal_sb;
i = (sbi->s_imap_blocks + sbi->s_zmap_blocks) * sizeof(bh);
map = kmalloc(i, GFP_KERNEL);
if (!map)
@@ -263,7 +265,7 @@ out_no_root:
out_no_bitmap:
printk("MINIX-fs: bad superblock or unable to read bitmaps\n");
- out_freemap:
+out_freemap:
for (i = 0; i < sbi->s_imap_blocks; i++)
brelse(sbi->s_imap[i]);
for (i = 0; i < sbi->s_zmap_blocks; i++)
@@ -276,11 +278,16 @@ out_no_map:
printk("MINIX-fs: can't allocate map\n");
goto out_release;
+out_illegal_sb:
+ if (!silent)
+ printk("MINIX-fs: bad superblock\n");
+ goto out_release;
+
out_no_fs:
if (!silent)
printk("VFS: Can't find a Minix or Minix V2 filesystem "
"on device %s\n", s->s_id);
- out_release:
+out_release:
brelse(bh);
goto out;
@@ -290,7 +297,7 @@ out_bad_hblock:
out_bad_sb:
printk("MINIX-fs: unable to read superblock\n");
- out:
+out:
s->s_fs_info = NULL;
kfree(sbi);
return -EINVAL;
diff --git a/fs/namei.c b/fs/namei.c
index 55a131230f9..432d6bc6fab 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -227,10 +227,10 @@ int generic_permission(struct inode *inode, int mask,
int permission(struct inode *inode, int mask, struct nameidata *nd)
{
+ umode_t mode = inode->i_mode;
int retval, submask;
if (mask & MAY_WRITE) {
- umode_t mode = inode->i_mode;
/*
* Nobody gets write access to a read-only fs.
@@ -247,6 +247,13 @@ int permission(struct inode *inode, int mask, struct nameidata *nd)
}
+ /*
+ * MAY_EXEC on regular files requires special handling: We override
+ * filesystem execute permissions if the mode bits aren't set.
+ */
+ if ((mask & MAY_EXEC) && S_ISREG(mode) && !(mode & S_IXUGO))
+ return -EACCES;
+
/* Ordinary permission routines do not understand MAY_APPEND. */
submask = mask & ~MAY_APPEND;
if (inode->i_op && inode->i_op->permission)
@@ -1767,6 +1774,8 @@ struct dentry *lookup_create(struct nameidata *nd, int is_dir)
if (nd->last_type != LAST_NORM)
goto fail;
nd->flags &= ~LOOKUP_PARENT;
+ nd->flags |= LOOKUP_CREATE;
+ nd->intent.open.flags = O_EXCL;
/*
* Do the final lookup.
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index cc2b874ad5a..48e892880d5 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -312,7 +312,13 @@ static void nfs_invalidate_page(struct page *page, unsigned long offset)
static int nfs_release_page(struct page *page, gfp_t gfp)
{
- return !nfs_wb_page(page->mapping->host, page);
+ if (gfp & __GFP_FS)
+ return !nfs_wb_page(page->mapping->host, page);
+ else
+ /*
+ * Avoid deadlock on nfs_wait_on_request().
+ */
+ return 0;
}
const struct address_space_operations nfs_file_aops = {
diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c
index b81e7ed3c90..07a5dd57646 100644
--- a/fs/nfs/idmap.c
+++ b/fs/nfs/idmap.c
@@ -130,9 +130,7 @@ nfs_idmap_delete(struct nfs4_client *clp)
if (!idmap)
return;
- dput(idmap->idmap_dentry);
- idmap->idmap_dentry = NULL;
- rpc_unlink(idmap->idmap_path);
+ rpc_unlink(idmap->idmap_dentry);
clp->cl_idmap = NULL;
kfree(idmap);
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index e6ee97f19d8..153898e1331 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2668,7 +2668,7 @@ out:
nfs4_set_cached_acl(inode, acl);
}
-static inline ssize_t nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t buflen)
+static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t buflen)
{
struct page *pages[NFS4ACL_MAXPAGES];
struct nfs_getaclargs args = {
@@ -2721,6 +2721,19 @@ out_free:
return ret;
}
+static ssize_t nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t buflen)
+{
+ struct nfs4_exception exception = { };
+ ssize_t ret;
+ do {
+ ret = __nfs4_get_acl_uncached(inode, buf, buflen);
+ if (ret >= 0)
+ break;
+ ret = nfs4_handle_exception(NFS_SERVER(inode), ret, &exception);
+ } while (exception.retry);
+ return ret;
+}
+
static ssize_t nfs4_proc_get_acl(struct inode *inode, void *buf, size_t buflen)
{
struct nfs_server *server = NFS_SERVER(inode);
@@ -2737,7 +2750,7 @@ static ssize_t nfs4_proc_get_acl(struct inode *inode, void *buf, size_t buflen)
return nfs4_get_acl_uncached(inode, buf, buflen);
}
-static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen)
+static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen)
{
struct nfs_server *server = NFS_SERVER(inode);
struct page *pages[NFS4ACL_MAXPAGES];
@@ -2763,6 +2776,18 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen
return ret;
}
+static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen)
+{
+ struct nfs4_exception exception = { };
+ int err;
+ do {
+ err = nfs4_handle_exception(NFS_SERVER(inode),
+ __nfs4_proc_set_acl(inode, buf, buflen),
+ &exception);
+ } while (exception.retry);
+ return err;
+}
+
static int
nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server)
{
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 1750d996f49..730ec8fb31c 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3355,7 +3355,7 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n
struct kvec *iov = rcvbuf->head;
unsigned int nr, pglen = rcvbuf->page_len;
uint32_t *end, *entry, *p, *kaddr;
- uint32_t len, attrlen;
+ uint32_t len, attrlen, xlen;
int hdrlen, recvd, status;
status = decode_op_hdr(xdr, OP_READDIR);
@@ -3377,10 +3377,10 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n
BUG_ON(pglen + readdir->pgbase > PAGE_CACHE_SIZE);
kaddr = p = (uint32_t *) kmap_atomic(page, KM_USER0);
- end = (uint32_t *) ((char *)p + pglen + readdir->pgbase);
+ end = p + ((pglen + readdir->pgbase) >> 2);
entry = p;
for (nr = 0; *p++; nr++) {
- if (p + 3 > end)
+ if (end - p < 3)
goto short_pkt;
dprintk("cookie = %Lu, ", *((unsigned long long *)p));
p += 2; /* cookie */
@@ -3389,18 +3389,19 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n
printk(KERN_WARNING "NFS: giant filename in readdir (len 0x%x)\n", len);
goto err_unmap;
}
- dprintk("filename = %*s\n", len, (char *)p);
- p += XDR_QUADLEN(len);
- if (p + 1 > end)
+ xlen = XDR_QUADLEN(len);
+ if (end - p < xlen + 1)
goto short_pkt;
+ dprintk("filename = %*s\n", len, (char *)p);
+ p += xlen;
len = ntohl(*p++); /* bitmap length */
- p += len;
- if (p + 1 > end)
+ if (end - p < len + 1)
goto short_pkt;
+ p += len;
attrlen = XDR_QUADLEN(ntohl(*p++));
- p += attrlen; /* attributes */
- if (p + 2 > end)
+ if (end - p < attrlen + 2)
goto short_pkt;
+ p += attrlen; /* attributes */
entry = p;
}
if (!nr && (entry[0] != 0 || entry[1] == 0))
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 65c0c5b3235..da9cf11c326 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -116,10 +116,17 @@ static void nfs_readpage_truncate_uninitialised_page(struct nfs_read_data *data)
pages = &data->args.pages[base >> PAGE_CACHE_SHIFT];
base &= ~PAGE_CACHE_MASK;
pglen = PAGE_CACHE_SIZE - base;
- if (pglen < remainder)
+ for (;;) {
+ if (remainder <= pglen) {
+ memclear_highpage_flush(*pages, base, remainder);
+ break;
+ }
memclear_highpage_flush(*pages, base, pglen);
- else
- memclear_highpage_flush(*pages, base, remainder);
+ pages++;
+ remainder -= pglen;
+ pglen = PAGE_CACHE_SIZE;
+ base = 0;
+ }
}
/*
@@ -476,6 +483,8 @@ static void nfs_readpage_set_pages_uptodate(struct nfs_read_data *data)
unsigned int base = data->args.pgbase;
struct page **pages;
+ if (data->res.eof)
+ count = data->args.count;
if (unlikely(count == 0))
return;
pages = &data->args.pages[base >> PAGE_CACHE_SHIFT];
@@ -483,11 +492,7 @@ static void nfs_readpage_set_pages_uptodate(struct nfs_read_data *data)
count += base;
for (;count >= PAGE_CACHE_SIZE; count -= PAGE_CACHE_SIZE, pages++)
SetPageUptodate(*pages);
- /*
- * Was this an eof or a short read? If the latter, don't mark the page
- * as uptodate yet.
- */
- if (count > 0 && (data->res.eof || data->args.count == data->res.count))
+ if (count != 0)
SetPageUptodate(*pages);
}
@@ -502,6 +507,8 @@ static void nfs_readpage_set_pages_error(struct nfs_read_data *data)
count += base;
for (;count >= PAGE_CACHE_SIZE; count -= PAGE_CACHE_SIZE, pages++)
SetPageError(*pages);
+ if (count != 0)
+ SetPageError(*pages);
}
/*
diff --git a/fs/partitions/sun.c b/fs/partitions/sun.c
index abe91ca03ed..0a5927c806c 100644
--- a/fs/partitions/sun.c
+++ b/fs/partitions/sun.c
@@ -74,7 +74,7 @@ int sun_partition(struct parsed_partitions *state, struct block_device *bdev)
spc = be16_to_cpu(label->ntrks) * be16_to_cpu(label->nsect);
for (i = 0; i < 8; i++, p++) {
unsigned long st_sector;
- int num_sectors;
+ unsigned int num_sectors;
st_sector = be32_to_cpu(p->start_cylinder) * spc;
num_sectors = be32_to_cpu(p->num_sectors);
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 9f2cfc30f9c..94215622544 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -169,7 +169,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
"Mapped: %8lu kB\n"
"Slab: %8lu kB\n"
"PageTables: %8lu kB\n"
- "NFS Unstable: %8lu kB\n"
+ "NFS_Unstable: %8lu kB\n"
"Bounce: %8lu kB\n"
"CommitLimit: %8lu kB\n"
"Committed_AS: %8lu kB\n"
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 39fedaa88a0..d935fb9394e 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -424,7 +424,7 @@ int xattr_readdir(struct file *file, filldir_t filler, void *buf)
int res = -ENOTDIR;
if (!file->f_op || !file->f_op->readdir)
goto out;
- mutex_lock(&inode->i_mutex);
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
// down(&inode->i_zombie);
res = -ENOENT;
if (!IS_DEADDIR(inode)) {
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 7de172efa08..fcce1a21a51 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1659,7 +1659,7 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent)
iput(inode);
goto error_out;
}
- sb->s_maxbytes = MAX_LFS_FILESIZE;
+ sb->s_maxbytes = 1<<30;
return 0;
error_out:
diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c
index e1b0e8cfecb..0abd66ce36e 100644
--- a/fs/udf/truncate.c
+++ b/fs/udf/truncate.c
@@ -239,37 +239,51 @@ void udf_truncate_extents(struct inode * inode)
{
if (offset)
{
- extoffset -= adsize;
- etype = udf_next_aext(inode, &bloc, &extoffset, &eloc, &elen, &bh, 1);
- if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30))
- {
- extoffset -= adsize;
- elen = EXT_NOT_RECORDED_NOT_ALLOCATED | (elen + offset);
- udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 0);
+ /*
+ * OK, there is not extent covering inode->i_size and
+ * no extent above inode->i_size => truncate is
+ * extending the file by 'offset'.
+ */
+ if ((!bh && extoffset == udf_file_entry_alloc_offset(inode)) ||
+ (bh && extoffset == sizeof(struct allocExtDesc))) {
+ /* File has no extents at all! */
+ memset(&eloc, 0x00, sizeof(kernel_lb_addr));
+ elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset;
+ udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1);
}
- else if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30))
- {
- kernel_lb_addr neloc = { 0, 0 };
+ else {
extoffset -= adsize;
- nelen = EXT_NOT_RECORDED_NOT_ALLOCATED |
- ((elen + offset + inode->i_sb->s_blocksize - 1) &
- ~(inode->i_sb->s_blocksize - 1));
- udf_write_aext(inode, bloc, &extoffset, neloc, nelen, bh, 1);
- udf_add_aext(inode, &bloc, &extoffset, eloc, (etype << 30) | elen, &bh, 1);
- }
- else
- {
- if (elen & (inode->i_sb->s_blocksize - 1))
+ etype = udf_next_aext(inode, &bloc, &extoffset, &eloc, &elen, &bh, 1);
+ if (etype == (EXT_NOT_RECORDED_NOT_ALLOCATED >> 30))
+ {
+ extoffset -= adsize;
+ elen = EXT_NOT_RECORDED_NOT_ALLOCATED | (elen + offset);
+ udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 0);
+ }
+ else if (etype == (EXT_NOT_RECORDED_ALLOCATED >> 30))
{
+ kernel_lb_addr neloc = { 0, 0 };
extoffset -= adsize;
- elen = EXT_RECORDED_ALLOCATED |
- ((elen + inode->i_sb->s_blocksize - 1) &
+ nelen = EXT_NOT_RECORDED_NOT_ALLOCATED |
+ ((elen + offset + inode->i_sb->s_blocksize - 1) &
~(inode->i_sb->s_blocksize - 1));
- udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 1);
+ udf_write_aext(inode, bloc, &extoffset, neloc, nelen, bh, 1);
+ udf_add_aext(inode, &bloc, &extoffset, eloc, (etype << 30) | elen, &bh, 1);
+ }
+ else
+ {
+ if (elen & (inode->i_sb->s_blocksize - 1))
+ {
+ extoffset -= adsize;
+ elen = EXT_RECORDED_ALLOCATED |
+ ((elen + inode->i_sb->s_blocksize - 1) &
+ ~(inode->i_sb->s_blocksize - 1));
+ udf_write_aext(inode, bloc, &extoffset, eloc, elen, bh, 1);
+ }
+ memset(&eloc, 0x00, sizeof(kernel_lb_addr));
+ elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset;
+ udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1);
}
- memset(&eloc, 0x00, sizeof(kernel_lb_addr));
- elen = EXT_NOT_RECORDED_NOT_ALLOCATED | offset;
- udf_add_aext(inode, &bloc, &extoffset, eloc, elen, &bh, 1);
}
}
}
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index e7c8615beb6..30c6e8a9446 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -169,18 +169,20 @@ static void ufs_clear_frag(struct inode *inode, struct buffer_head *bh)
static struct buffer_head *
ufs_clear_frags(struct inode *inode, sector_t beg,
- unsigned int n)
+ unsigned int n, sector_t want)
{
- struct buffer_head *res, *bh;
+ struct buffer_head *res = NULL, *bh;
sector_t end = beg + n;
- res = sb_getblk(inode->i_sb, beg);
- ufs_clear_frag(inode, res);
- for (++beg; beg < end; ++beg) {
+ for (; beg < end; ++beg) {
bh = sb_getblk(inode->i_sb, beg);
ufs_clear_frag(inode, bh);
- brelse(bh);
+ if (want != beg)
+ brelse(bh);
+ else
+ res = bh;
}
+ BUG_ON(!res);
return res;
}
@@ -265,7 +267,9 @@ repeat:
lastfrag = ufsi->i_lastfrag;
}
- goal = fs32_to_cpu(sb, ufsi->i_u1.i_data[lastblock]) + uspi->s_fpb;
+ tmp = fs32_to_cpu(sb, ufsi->i_u1.i_data[lastblock]);
+ if (tmp)
+ goal = tmp + uspi->s_fpb;
tmp = ufs_new_fragments (inode, p, fragment - blockoff,
goal, required + blockoff,
err, locked_page);
@@ -277,13 +281,15 @@ repeat:
tmp = ufs_new_fragments(inode, p, fragment - (blockoff - lastblockoff),
fs32_to_cpu(sb, *p), required + (blockoff - lastblockoff),
err, locked_page);
- }
+ } else /* (lastblock > block) */ {
/*
* We will allocate new block before last allocated block
*/
- else /* (lastblock > block) */ {
- if (lastblock && (tmp = fs32_to_cpu(sb, ufsi->i_u1.i_data[lastblock-1])))
- goal = tmp + uspi->s_fpb;
+ if (block) {
+ tmp = fs32_to_cpu(sb, ufsi->i_u1.i_data[block-1]);
+ if (tmp)
+ goal = tmp + uspi->s_fpb;
+ }
tmp = ufs_new_fragments(inode, p, fragment - blockoff,
goal, uspi->s_fpb, err, locked_page);
}
@@ -296,7 +302,7 @@ repeat:
}
if (!phys) {
- result = ufs_clear_frags(inode, tmp + blockoff, required);
+ result = ufs_clear_frags(inode, tmp, required, tmp + blockoff);
} else {
*phys = tmp + blockoff;
result = NULL;
@@ -383,7 +389,7 @@ repeat:
}
}
- if (block && (tmp = fs32_to_cpu(sb, ((__fs32*)bh->b_data)[block-1]) + uspi->s_fpb))
+ if (block && (tmp = fs32_to_cpu(sb, ((__fs32*)bh->b_data)[block-1])))
goal = tmp + uspi->s_fpb;
else
goal = bh->b_blocknr + uspi->s_fpb;
@@ -397,7 +403,8 @@ repeat:
if (!phys) {
- result = ufs_clear_frags(inode, tmp + blockoff, uspi->s_fpb);
+ result = ufs_clear_frags(inode, tmp, uspi->s_fpb,
+ tmp + blockoff);
} else {
*phys = tmp + blockoff;
*new = 1;
diff --git a/fs/ufs/truncate.c b/fs/ufs/truncate.c
index c9b55872079..ea11d04c41a 100644
--- a/fs/ufs/truncate.c
+++ b/fs/ufs/truncate.c
@@ -375,17 +375,15 @@ static int ufs_alloc_lastblock(struct inode *inode)
int err = 0;
struct address_space *mapping = inode->i_mapping;
struct ufs_sb_private_info *uspi = UFS_SB(inode->i_sb)->s_uspi;
- struct ufs_inode_info *ufsi = UFS_I(inode);
unsigned lastfrag, i, end;
struct page *lastpage;
struct buffer_head *bh;
lastfrag = (i_size_read(inode) + uspi->s_fsize - 1) >> uspi->s_fshift;
- if (!lastfrag) {
- ufsi->i_lastfrag = 0;
+ if (!lastfrag)
goto out;
- }
+
lastfrag--;
lastpage = ufs_get_locked_page(mapping, lastfrag >>
@@ -400,25 +398,25 @@ static int ufs_alloc_lastblock(struct inode *inode)
for (i = 0; i < end; ++i)
bh = bh->b_this_page;
- if (!buffer_mapped(bh)) {
- err = ufs_getfrag_block(inode, lastfrag, bh, 1);
-
- if (unlikely(err))
- goto out_unlock;
-
- if (buffer_new(bh)) {
- clear_buffer_new(bh);
- unmap_underlying_metadata(bh->b_bdev,
- bh->b_blocknr);
- /*
- * we do not zeroize fragment, because of
- * if it maped to hole, it already contains zeroes
- */
- set_buffer_uptodate(bh);
- mark_buffer_dirty(bh);
- set_page_dirty(lastpage);
- }
+
+ err = ufs_getfrag_block(inode, lastfrag, bh, 1);
+
+ if (unlikely(err))
+ goto out_unlock;
+
+ if (buffer_new(bh)) {
+ clear_buffer_new(bh);
+ unmap_underlying_metadata(bh->b_bdev,
+ bh->b_blocknr);
+ /*
+ * we do not zeroize fragment, because of
+ * if it maped to hole, it already contains zeroes
+ */
+ set_buffer_uptodate(bh);
+ mark_buffer_dirty(bh);
+ set_page_dirty(lastpage);
}
+
out_unlock:
ufs_put_locked_page(lastpage);
out:
@@ -440,23 +438,11 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size)
if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
return -EPERM;
- if (inode->i_size > old_i_size) {
- /*
- * if we expand file we should care about
- * allocation of block for last byte first of all
- */
- err = ufs_alloc_lastblock(inode);
+ err = ufs_alloc_lastblock(inode);
- if (err) {
- i_size_write(inode, old_i_size);
- goto out;
- }
- /*
- * go away, because of we expand file, and we do not
- * need free blocks, and zeroizes page
- */
- lock_kernel();
- goto almost_end;
+ if (err) {
+ i_size_write(inode, old_i_size);
+ goto out;
}
block_truncate_page(inode->i_mapping, inode->i_size, ufs_getfrag_block);
@@ -477,21 +463,8 @@ int ufs_truncate(struct inode *inode, loff_t old_i_size)
yield();
}
- if (inode->i_size < old_i_size) {
- /*
- * now we should have enough space
- * to allocate block for last byte
- */
- err = ufs_alloc_lastblock(inode);
- if (err)
- /*
- * looks like all the same - we have no space,
- * but we truncate file already
- */
- inode->i_size = (ufsi->i_lastfrag - 1) * uspi->s_fsize;
- }
-almost_end:
inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC;
+ ufsi->i_lastfrag = DIRECT_FRAGMENT;
unlock_kernel();
mark_inode_dirty(inode);
out:
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index 72964f9b841..7463fd5252c 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -104,6 +104,7 @@ enum s3c2410_chan_op_e {
S3C2410_DMAOP_RESUME,
S3C2410_DMAOP_FLUSH,
S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
+ S3C2410_DMAOP_STARTED, /* indicate channel started */
};
typedef enum s3c2410_chan_op_e s3c2410_chan_op_t;
diff --git a/include/asm-arm/arch-s3c2410/regs-rtc.h b/include/asm-arm/arch-s3c2410/regs-rtc.h
index 228983f89bc..0fbec07bb6b 100644
--- a/include/asm-arm/arch-s3c2410/regs-rtc.h
+++ b/include/asm-arm/arch-s3c2410/regs-rtc.h
@@ -18,7 +18,7 @@
#ifndef __ASM_ARCH_REGS_RTC_H
#define __ASM_ARCH_REGS_RTC_H __FILE__
-#define S3C2410_RTCREG(x) ((x) + S3C24XX_VA_RTC)
+#define S3C2410_RTCREG(x) (x)
#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
#define S3C2410_RTCCON_RTCEN (1<<0)
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
index edb7b6502fc..91a31adfa8a 100644
--- a/include/asm-arm/procinfo.h
+++ b/include/asm-arm/procinfo.h
@@ -55,5 +55,6 @@ extern unsigned int elf_hwcap;
#define HWCAP_VFP 64
#define HWCAP_EDSP 128
#define HWCAP_JAVA 256
+#define HWCAP_IWMMXT 512
#endif
diff --git a/include/asm-i386/mmzone.h b/include/asm-i386/mmzone.h
index e33e9f9e4c6..22cb07cc8f3 100644
--- a/include/asm-i386/mmzone.h
+++ b/include/asm-i386/mmzone.h
@@ -14,7 +14,7 @@ extern struct pglist_data *node_data[];
#ifdef CONFIG_X86_NUMAQ
#include <asm/numaq.h>
-#else /* summit or generic arch */
+#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
#include <asm/srat.h>
#endif
diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h
index 9f0917c6865..ae63db7b3e7 100644
--- a/include/asm-powerpc/pgalloc.h
+++ b/include/asm-powerpc/pgalloc.h
@@ -117,7 +117,7 @@ static inline void pte_free(struct page *ptepage)
pte_free_kernel(page_address(ptepage));
}
-#define PGF_CACHENUM_MASK 0xf
+#define PGF_CACHENUM_MASK 0x3
typedef struct pgtable_free {
unsigned long val;
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
index 7307aa77567..4c9f5229e83 100644
--- a/include/asm-powerpc/system.h
+++ b/include/asm-powerpc/system.h
@@ -53,6 +53,15 @@
#define smp_read_barrier_depends() do { } while(0)
#endif /* CONFIG_SMP */
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known. For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x) \
+ asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
struct task_struct;
struct pt_regs;
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
index c4c278d72f7..2c702d35a7c 100644
--- a/include/asm-powerpc/tsi108.h
+++ b/include/asm-powerpc/tsi108.h
@@ -1,16 +1,18 @@
/*
- * include/asm-ppc/tsi108.h
- *
* common routine and memory layout for Tundra TSI108(Grendel) host bridge
* memory controller.
*
* Author: Jacob Pan (jacob.pan@freescale.com)
* Alex Bounine (alexandreb@tundra.com)
- * 2004 (c) Freescale Semiconductor Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*/
+
#ifndef __PPC_KERNEL_TSI108_H
#define __PPC_KERNEL_TSI108_H
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
new file mode 100644
index 00000000000..3e4d04effa5
--- /dev/null
+++ b/include/asm-powerpc/tsi108_irq.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_PPC_TSI108_IRQ_H
+#define _ASM_PPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE 0
+#endif
+
+#define TSI108_IRQ(x) (TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS (36 + 4) /* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO 0xF
+
+#define TSI108_IRQ_SPURIOUS (TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL 10 /* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0 TSI108_IRQ(0) /* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1 TSI108_IRQ(1) /* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2 TSI108_IRQ(2) /* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3 TSI108_IRQ(3) /* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0 TSI108_IRQ(4) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1 TSI108_IRQ(5) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2 TSI108_IRQ(6) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3 TSI108_IRQ(7) /* Reserved IRQ */
+#define IRQ_TSI108_DMA0 TSI108_IRQ(8) /* DMA0 */
+#define IRQ_TSI108_DMA1 TSI108_IRQ(9) /* DMA1 */
+#define IRQ_TSI108_DMA2 TSI108_IRQ(10) /* DMA2 */
+#define IRQ_TSI108_DMA3 TSI108_IRQ(11) /* DMA3 */
+#define IRQ_TSI108_UART0 TSI108_IRQ(12) /* UART0 */
+#define IRQ_TSI108_UART1 TSI108_IRQ(13) /* UART1 */
+#define IRQ_TSI108_I2C TSI108_IRQ(14) /* I2C */
+#define IRQ_TSI108_GPIO TSI108_IRQ(15) /* GPIO */
+#define IRQ_TSI108_GIGE0 TSI108_IRQ(16) /* GIGE0 */
+#define IRQ_TSI108_GIGE1 TSI108_IRQ(17) /* GIGE1 */
+#define IRQ_TSI108_RESERVED4 TSI108_IRQ(18) /* Reserved IRQ */
+#define IRQ_TSI108_HLP TSI108_IRQ(19) /* HLP */
+#define IRQ_TSI108_SDRAM TSI108_IRQ(20) /* SDC */
+#define IRQ_TSI108_PROC_IF TSI108_IRQ(21) /* Processor IF */
+#define IRQ_TSI108_RESERVED5 TSI108_IRQ(22) /* Reserved IRQ */
+#define IRQ_TSI108_PCI TSI108_IRQ(23) /* PCI/X block */
+
+#define IRQ_TSI108_MBOX0 TSI108_IRQ(24) /* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1 TSI108_IRQ(25) /* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2 TSI108_IRQ(26) /* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3 TSI108_IRQ(27) /* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0 TSI108_IRQ(28) /* Doorbell 0 */
+#define IRQ_TSI108_DBELL1 TSI108_IRQ(29) /* Doorbell 1 */
+#define IRQ_TSI108_DBELL2 TSI108_IRQ(30) /* Doorbell 2 */
+#define IRQ_TSI108_DBELL3 TSI108_IRQ(31) /* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0 TSI108_IRQ(32) /* Global Timer 0 */
+#define IRQ_TSI108_TIMER1 TSI108_IRQ(33) /* Global Timer 1 */
+#define IRQ_TSI108_TIMER2 TSI108_IRQ(34) /* Global Timer 2 */
+#define IRQ_TSI108_TIMER3 TSI108_IRQ(35) /* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE TSI108_IRQ(36)
+#define IRQ_PCI_INTA (IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB (IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC (IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD (IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS (4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE (TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0 0x1
+#define IDIR_INT_OUT1 0x2
+#define IDIR_INT_OUT2 0x4
+#define IDIR_INT_OUT3 0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+ TSI108_IRQ_DIRECTED,
+ TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif /* _ASM_PPC_TSI108_IRQ_H */
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index 1ba19eb34ce..ebfe395cfb8 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -234,7 +234,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
sz_bits = 0UL;
if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) {
__asm__ __volatile__(
- "\n661: sethi %uhi(%1), %0\n"
+ "\n661: sethi %%uhi(%1), %0\n"
" sllx %0, 32, %0\n"
" .section .sun4v_2insn_patch, \"ax\"\n"
" .word 661b\n"
diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h
index 269d000bb2a..bea0255196c 100644
--- a/include/linux/compat_ioctl.h
+++ b/include/linux/compat_ioctl.h
@@ -216,6 +216,7 @@ COMPATIBLE_IOCTL(VT_RESIZE)
COMPATIBLE_IOCTL(VT_RESIZEX)
COMPATIBLE_IOCTL(VT_LOCKSWITCH)
COMPATIBLE_IOCTL(VT_UNLOCKSWITCH)
+COMPATIBLE_IOCTL(VT_GETHIFONTMASK)
/* Little p (/dev/rtc, /dev/envctrl, etc.) */
COMPATIBLE_IOCTL(RTC_AIE_ON)
COMPATIBLE_IOCTL(RTC_AIE_OFF)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 25610205c90..555bc195c42 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -570,13 +570,14 @@ struct inode {
* 3: quota file
*
* The locking order between these classes is
- * parent -> child -> normal -> quota
+ * parent -> child -> normal -> xattr -> quota
*/
enum inode_i_mutex_lock_class
{
I_MUTEX_NORMAL,
I_MUTEX_PARENT,
I_MUTEX_CHILD,
+ I_MUTEX_XATTR,
I_MUTEX_QUOTA
};
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
index 88d5961f7a3..8e2042b9d47 100644
--- a/include/linux/ioprio.h
+++ b/include/linux/ioprio.h
@@ -59,27 +59,6 @@ static inline int task_nice_ioprio(struct task_struct *task)
/*
* For inheritance, return the highest of the two given priorities
*/
-static inline int ioprio_best(unsigned short aprio, unsigned short bprio)
-{
- unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
- unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
-
- if (!ioprio_valid(aprio))
- return bprio;
- if (!ioprio_valid(bprio))
- return aprio;
-
- if (aclass == IOPRIO_CLASS_NONE)
- aclass = IOPRIO_CLASS_BE;
- if (bclass == IOPRIO_CLASS_NONE)
- bclass = IOPRIO_CLASS_BE;
-
- if (aclass == bclass)
- return min(aprio, bprio);
- if (aclass > bclass)
- return bprio;
- else
- return aprio;
-}
+extern int ioprio_best(unsigned short aprio, unsigned short bprio);
#endif
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 20eb34403d0..a04c154c520 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -72,6 +72,9 @@ extern int journal_enable_debug;
#endif
extern void * __jbd_kmalloc (const char *where, size_t size, gfp_t flags, int retry);
+extern void * jbd_slab_alloc(size_t size, gfp_t flags);
+extern void jbd_slab_free(void *ptr, size_t size);
+
#define jbd_kmalloc(size, flags) \
__jbd_kmalloc(__FUNCTION__, (size), (flags), journal_oom_retry)
#define jbd_rep_kmalloc(size, flags) \
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 10c13dc4665..427c67ff89e 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -48,15 +48,25 @@ enum nf_br_hook_priorities {
/* Only used in br_forward.c */
static inline
-void nf_bridge_maybe_copy_header(struct sk_buff *skb)
+int nf_bridge_maybe_copy_header(struct sk_buff *skb)
{
+ int err;
+
if (skb->nf_bridge) {
if (skb->protocol == __constant_htons(ETH_P_8021Q)) {
+ err = skb_cow(skb, 18);
+ if (err)
+ return err;
memcpy(skb->data - 18, skb->nf_bridge->data, 18);
skb_push(skb, 4);
- } else
+ } else {
+ err = skb_cow(skb, 16);
+ if (err)
+ return err;
memcpy(skb->data - 16, skb->nf_bridge->data, 16);
+ }
}
+ return 0;
}
/* This is called by the IP fragmenting code and it ensures there is
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 2d3fb6416d9..db9cbf68e12 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -659,7 +659,7 @@ struct nfs4_rename_res {
struct nfs4_setclientid {
const nfs4_verifier * sc_verifier; /* request */
unsigned int sc_name_len;
- char sc_name[32]; /* request */
+ char sc_name[48]; /* request */
u32 sc_prog; /* request */
unsigned int sc_netid_len;
char sc_netid[4]; /* request */
diff --git a/include/linux/node.h b/include/linux/node.h
index 81dcec84cd8..bc001bc225c 100644
--- a/include/linux/node.h
+++ b/include/linux/node.h
@@ -30,12 +30,20 @@ extern struct node node_devices[];
extern int register_node(struct node *, int, struct node *);
extern void unregister_node(struct node *node);
+#ifdef CONFIG_NUMA
extern int register_one_node(int nid);
extern void unregister_one_node(int nid);
-#ifdef CONFIG_NUMA
extern int register_cpu_under_node(unsigned int cpu, unsigned int nid);
extern int unregister_cpu_under_node(unsigned int cpu, unsigned int nid);
#else
+static inline int register_one_node(int nid)
+{
+ return 0;
+}
+static inline int unregister_one_node(int nid)
+{
+ return 0;
+}
static inline int register_cpu_under_node(unsigned int cpu, unsigned int nid)
{
return 0;
diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h
index 2c2189cb30a..a481472c948 100644
--- a/include/linux/sunrpc/rpc_pipe_fs.h
+++ b/include/linux/sunrpc/rpc_pipe_fs.h
@@ -42,9 +42,9 @@ RPC_I(struct inode *inode)
extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *);
extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *);
-extern int rpc_rmdir(char *);
+extern int rpc_rmdir(struct dentry *);
extern struct dentry *rpc_mkpipe(char *, void *, struct rpc_pipe_ops *, int flags);
-extern int rpc_unlink(char *);
+extern int rpc_unlink(struct dentry *);
extern struct vfsmount *rpc_get_mount(void);
extern void rpc_put_mount(void);
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 840e47a4ccc..3a0cca255b7 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -37,7 +37,7 @@ extern unsigned int xprt_max_resvport;
#define RPC_MIN_RESVPORT (1U)
#define RPC_MAX_RESVPORT (65535U)
-#define RPC_DEF_MIN_RESVPORT (650U)
+#define RPC_DEF_MIN_RESVPORT (665U)
#define RPC_DEF_MAX_RESVPORT (1023U)
/*
diff --git a/include/linux/tty.h b/include/linux/tty.h
index e421d5e3481..04827ca6578 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -59,6 +59,7 @@ struct tty_bufhead {
struct tty_buffer *head; /* Queue head */
struct tty_buffer *tail; /* Active buffer */
struct tty_buffer *free; /* Free queue head */
+ int memory_used; /* Buffer space used excluding free queue */
};
/*
* The pty uses char_buf and flag_buf as a contiguous buffer
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 8ab334a4822..ba806e8711b 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -60,5 +60,6 @@ struct vt_consize {
#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
+#define VT_GETHIFONTMASK 0x560D /* return hi font mask */
#endif /* _LINUX_VT_H */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index a9663b49ea5..92eae0e0f3f 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -404,19 +404,6 @@ static inline int sctp_list_single_entry(struct list_head *head)
return ((head->next != head) && (head->next == head->prev));
}
-/* Calculate the size (in bytes) occupied by the data of an iovec. */
-static inline size_t get_user_iov_size(struct iovec *iov, int iovlen)
-{
- size_t retval = 0;
-
- for (; iovlen > 0; --iovlen) {
- retval += iov->iov_len;
- iov++;
- }
-
- return retval;
-}
-
/* Generate a random jitter in the range of -50% ~ +50% of input RTO. */
static inline __s32 sctp_jitter(__u32 rto)
{
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index 1eac3d0eb7a..de313de4fef 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -221,8 +221,7 @@ struct sctp_chunk *sctp_make_abort_no_data(const struct sctp_association *,
const struct sctp_chunk *,
__u32 tsn);
struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *,
- const struct sctp_chunk *,
- const struct msghdr *);
+ const struct msghdr *, size_t msg_len);
struct sctp_chunk *sctp_make_abort_violation(const struct sctp_association *,
const struct sctp_chunk *,
const __u8 *,
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index ba2760802de..41904f611d1 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -60,6 +60,7 @@ struct iscsi_nopin;
#define TMABORT_SUCCESS 0x1
#define TMABORT_FAILED 0x2
#define TMABORT_TIMEDOUT 0x3
+#define TMABORT_NOT_FOUND 0x4
/* Connection suspend "bit" */
#define ISCSI_SUSPEND_BIT 1
@@ -83,6 +84,12 @@ struct iscsi_mgmt_task {
struct list_head running;
};
+enum {
+ ISCSI_TASK_COMPLETED,
+ ISCSI_TASK_PENDING,
+ ISCSI_TASK_RUNNING,
+};
+
struct iscsi_cmd_task {
/*
* Becuae LLDs allocate their hdr differently, this is a pointer to
@@ -101,6 +108,8 @@ struct iscsi_cmd_task {
struct iscsi_conn *conn; /* used connection */
struct iscsi_mgmt_task *mtask; /* tmf mtask in progr */
+ /* state set/tested under session->lock */
+ int state;
struct list_head running; /* running cmd list */
void *dd_data; /* driver/transport data */
};
@@ -126,6 +135,14 @@ struct iscsi_conn {
int id; /* CID */
struct list_head item; /* maintains list of conns */
int c_stage; /* connection state */
+ /*
+ * Preallocated buffer for pdus that have data but do not
+ * originate from scsi-ml. We never have two pdus using the
+ * buffer at the same time. It is only allocated to
+ * the default max recv size because the pdus we support
+ * should always fit in this buffer
+ */
+ char *data;
struct iscsi_mgmt_task *login_mtask; /* mtask used for login/text */
struct iscsi_mgmt_task *mtask; /* xmit mtask in progress */
struct iscsi_cmd_task *ctask; /* xmit ctask in progress */
@@ -134,7 +151,7 @@ struct iscsi_conn {
struct kfifo *immqueue; /* immediate xmit queue */
struct kfifo *mgmtqueue; /* mgmt (control) xmit queue */
struct list_head mgmt_run_list; /* list of control tasks */
- struct kfifo *xmitqueue; /* data-path cmd queue */
+ struct list_head xmitqueue; /* data-path cmd queue */
struct list_head run_list; /* list of cmds in progress */
struct work_struct xmitwork; /* per-conn. xmit workqueue */
/*
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 5a3df1d7085..39e833260bd 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -57,8 +57,6 @@ struct sockaddr;
* @stop_conn: suspend/recover/terminate connection
* @send_pdu: send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text.
* @session_recovery_timedout: notify LLD a block during recovery timed out
- * @suspend_conn_recv: susepend the recv side of the connection
- * @termincate_conn: destroy socket connection. Called with mutex lock.
* @init_cmd_task: Initialize a iscsi_cmd_task and any internal structs.
* Called from queuecommand with session lock held.
* @init_mgmt_task: Initialize a iscsi_mgmt_task and any internal structs.
@@ -112,8 +110,6 @@ struct iscsi_transport {
char *data, uint32_t data_size);
void (*get_stats) (struct iscsi_cls_conn *conn,
struct iscsi_stats *stats);
- void (*suspend_conn_recv) (struct iscsi_conn *conn);
- void (*terminate_conn) (struct iscsi_conn *conn);
void (*init_cmd_task) (struct iscsi_cmd_task *ctask);
void (*init_mgmt_task) (struct iscsi_conn *conn,
struct iscsi_mgmt_task *mtask,
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 1a649f2bb9b..4ea6f0dc2fc 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -816,6 +816,10 @@ static int update_cpumask(struct cpuset *cs, char *buf)
struct cpuset trialcs;
int retval, cpus_unchanged;
+ /* top_cpuset.cpus_allowed tracks cpu_online_map; it's read-only */
+ if (cs == &top_cpuset)
+ return -EACCES;
+
trialcs = *cs;
retval = cpulist_parse(buf, trialcs.cpus_allowed);
if (retval < 0)
@@ -2033,6 +2037,33 @@ out:
return err;
}
+/*
+ * The top_cpuset tracks what CPUs and Memory Nodes are online,
+ * period. This is necessary in order to make cpusets transparent
+ * (of no affect) on systems that are actively using CPU hotplug
+ * but making no active use of cpusets.
+ *
+ * This handles CPU hotplug (cpuhp) events. If someday Memory
+ * Nodes can be hotplugged (dynamically changing node_online_map)
+ * then we should handle that too, perhaps in a similar way.
+ */
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int cpuset_handle_cpuhp(struct notifier_block *nb,
+ unsigned long phase, void *cpu)
+{
+ mutex_lock(&manage_mutex);
+ mutex_lock(&callback_mutex);
+
+ top_cpuset.cpus_allowed = cpu_online_map;
+
+ mutex_unlock(&callback_mutex);
+ mutex_unlock(&manage_mutex);
+
+ return 0;
+}
+#endif
+
/**
* cpuset_init_smp - initialize cpus_allowed
*
@@ -2043,6 +2074,8 @@ void __init cpuset_init_smp(void)
{
top_cpuset.cpus_allowed = cpu_online_map;
top_cpuset.mems_allowed = node_online_map;
+
+ hotcpu_notifier(cpuset_handle_cpuhp, 0);
}
/**
@@ -2387,7 +2420,7 @@ EXPORT_SYMBOL_GPL(cpuset_mem_spread_node);
int cpuset_excl_nodes_overlap(const struct task_struct *p)
{
const struct cpuset *cs1, *cs2; /* my and p's cpuset ancestors */
- int overlap = 0; /* do cpusets overlap? */
+ int overlap = 1; /* do cpusets overlap? */
task_lock(current);
if (current->flags & PF_EXITING) {
diff --git a/kernel/futex.c b/kernel/futex.c
index d4633c588f3..b9b8aea5389 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -397,7 +397,7 @@ static struct task_struct * futex_find_get_task(pid_t pid)
p = NULL;
goto out_unlock;
}
- if (p->state == EXIT_ZOMBIE || p->exit_state == EXIT_ZOMBIE) {
+ if (p->exit_state != 0) {
p = NULL;
goto out_unlock;
}
diff --git a/kernel/sched.c b/kernel/sched.c
index a2be2d05529..a234fbee123 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4162,10 +4162,8 @@ do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
read_unlock_irq(&tasklist_lock);
return -ESRCH;
}
- get_task_struct(p);
- read_unlock_irq(&tasklist_lock);
retval = sched_setscheduler(p, policy, &lparam);
- put_task_struct(p);
+ read_unlock_irq(&tasklist_lock);
return retval;
}
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index dcfb5d73146..51cacd111db 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -111,7 +111,6 @@ static int stop_machine(void)
/* If some failed, kill them all. */
if (ret < 0) {
stopmachine_set_state(STOPMACHINE_EXIT);
- up(&stopmachine_mutex);
return ret;
}
diff --git a/lib/ts_bm.c b/lib/ts_bm.c
index 0110e441480..d90822c378a 100644
--- a/lib/ts_bm.c
+++ b/lib/ts_bm.c
@@ -111,15 +111,14 @@ static int subpattern(u8 *pattern, int i, int j, int g)
return ret;
}
-static void compute_prefix_tbl(struct ts_bm *bm, const u8 *pattern,
- unsigned int len)
+static void compute_prefix_tbl(struct ts_bm *bm)
{
int i, j, g;
for (i = 0; i < ASIZE; i++)
- bm->bad_shift[i] = len;
- for (i = 0; i < len - 1; i++)
- bm->bad_shift[pattern[i]] = len - 1 - i;
+ bm->bad_shift[i] = bm->patlen;
+ for (i = 0; i < bm->patlen - 1; i++)
+ bm->bad_shift[bm->pattern[i]] = bm->patlen - 1 - i;
/* Compute the good shift array, used to match reocurrences
* of a subpattern */
@@ -150,8 +149,8 @@ static struct ts_config *bm_init(const void *pattern, unsigned int len,
bm = ts_config_priv(conf);
bm->patlen = len;
bm->pattern = (u8 *) bm->good_shift + prefix_tbl_len;
- compute_prefix_tbl(bm, pattern, len);
memcpy(bm->pattern, pattern, len);
+ compute_prefix_tbl(bm);
return conf;
}
diff --git a/mm/swapfile.c b/mm/swapfile.c
index e70d6c6d6fe..f1f5ec78378 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -442,11 +442,12 @@ int swap_type_of(dev_t device)
if (!(swap_info[i].flags & SWP_WRITEOK))
continue;
+
if (!device) {
spin_unlock(&swap_lock);
return i;
}
- inode = swap_info->swap_file->f_dentry->d_inode;
+ inode = swap_info[i].swap_file->f_dentry->d_inode;
if (S_ISBLK(inode->i_mode) &&
device == MKDEV(imajor(inode), iminor(inode))) {
spin_unlock(&swap_lock);
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 6ccd32b3080..864fbbc7b24 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -40,11 +40,15 @@ int br_dev_queue_push_xmit(struct sk_buff *skb)
else {
#ifdef CONFIG_BRIDGE_NETFILTER
/* ip_refrag calls ip_fragment, doesn't copy the MAC header. */
- nf_bridge_maybe_copy_header(skb);
+ if (nf_bridge_maybe_copy_header(skb))
+ kfree_skb(skb);
+ else
#endif
- skb_push(skb, ETH_HLEN);
+ {
+ skb_push(skb, ETH_HLEN);
- dev_queue_xmit(skb);
+ dev_queue_xmit(skb);
+ }
}
return 0;
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index c39bff706cf..090bc39e819 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -2,7 +2,7 @@
* net/dccp/ccids/ccid3.c
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005-6 Ian McDonald <imcdnzl@gmail.com>
+ * Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
*
* An implementation of the DCCP protocol
*
@@ -342,6 +342,8 @@ static int ccid3_hc_tx_send_packet(struct sock *sk,
new_packet->dccphtx_ccval =
DCCP_SKB_CB(skb)->dccpd_ccval =
hctx->ccid3hctx_last_win_count;
+ timeval_add_usecs(&hctx->ccid3hctx_t_nom,
+ hctx->ccid3hctx_t_ipi);
}
out:
return rc;
@@ -413,7 +415,8 @@ static void ccid3_hc_tx_packet_sent(struct sock *sk, int more, int len)
case TFRC_SSTATE_NO_FBACK:
case TFRC_SSTATE_FBACK:
if (len > 0) {
- hctx->ccid3hctx_t_nom = now;
+ timeval_sub_usecs(&hctx->ccid3hctx_t_nom,
+ hctx->ccid3hctx_t_ipi);
ccid3_calc_new_t_ipi(hctx);
ccid3_calc_new_delta(hctx);
timeval_add_usecs(&hctx->ccid3hctx_t_nom,
@@ -757,8 +760,7 @@ static void ccid3_hc_rx_send_feedback(struct sock *sk)
}
hcrx->ccid3hcrx_tstamp_last_feedback = now;
- hcrx->ccid3hcrx_last_counter = packet->dccphrx_ccval;
- hcrx->ccid3hcrx_seqno_last_counter = packet->dccphrx_seqno;
+ hcrx->ccid3hcrx_ccval_last_counter = packet->dccphrx_ccval;
hcrx->ccid3hcrx_bytes_recv = 0;
/* Convert to multiples of 10us */
@@ -782,7 +784,7 @@ static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb)
if (!(sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN))
return 0;
- DCCP_SKB_CB(skb)->dccpd_ccval = hcrx->ccid3hcrx_last_counter;
+ DCCP_SKB_CB(skb)->dccpd_ccval = hcrx->ccid3hcrx_ccval_last_counter;
if (dccp_packet_without_ack(skb))
return 0;
@@ -854,6 +856,11 @@ static u32 ccid3_hc_rx_calc_first_li(struct sock *sk)
interval = 1;
}
found:
+ if (!tail) {
+ LIMIT_NETDEBUG(KERN_WARNING "%s: tail is null\n",
+ __FUNCTION__);
+ return ~0;
+ }
rtt = timeval_delta(&tstamp, &tail->dccphrx_tstamp) * 4 / interval;
ccid3_pr_debug("%s, sk=%p, approximated RTT to %uus\n",
dccp_role(sk), sk, rtt);
@@ -864,9 +871,20 @@ found:
delta = timeval_delta(&tstamp, &hcrx->ccid3hcrx_tstamp_last_feedback);
x_recv = usecs_div(hcrx->ccid3hcrx_bytes_recv, delta);
+ if (x_recv == 0)
+ x_recv = hcrx->ccid3hcrx_x_recv;
+
tmp1 = (u64)x_recv * (u64)rtt;
do_div(tmp1,10000000);
tmp2 = (u32)tmp1;
+
+ if (!tmp2) {
+ LIMIT_NETDEBUG(KERN_WARNING "tmp2 = 0 "
+ "%s: x_recv = %u, rtt =%u\n",
+ __FUNCTION__, x_recv, rtt);
+ return ~0;
+ }
+
fval = (hcrx->ccid3hcrx_s * 100000) / tmp2;
/* do not alter order above or you will get overflow on 32 bit */
p = tfrc_calc_x_reverse_lookup(fval);
@@ -882,31 +900,101 @@ found:
static void ccid3_hc_rx_update_li(struct sock *sk, u64 seq_loss, u8 win_loss)
{
struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+ struct dccp_li_hist_entry *next, *head;
+ u64 seq_temp;
- if (seq_loss != DCCP_MAX_SEQNO + 1 &&
- list_empty(&hcrx->ccid3hcrx_li_hist)) {
- struct dccp_li_hist_entry *li_tail;
+ if (list_empty(&hcrx->ccid3hcrx_li_hist)) {
+ if (!dccp_li_hist_interval_new(ccid3_li_hist,
+ &hcrx->ccid3hcrx_li_hist, seq_loss, win_loss))
+ return;
- li_tail = dccp_li_hist_interval_new(ccid3_li_hist,
- &hcrx->ccid3hcrx_li_hist,
- seq_loss, win_loss);
- if (li_tail == NULL)
+ next = (struct dccp_li_hist_entry *)
+ hcrx->ccid3hcrx_li_hist.next;
+ next->dccplih_interval = ccid3_hc_rx_calc_first_li(sk);
+ } else {
+ struct dccp_li_hist_entry *entry;
+ struct list_head *tail;
+
+ head = (struct dccp_li_hist_entry *)
+ hcrx->ccid3hcrx_li_hist.next;
+ /* FIXME win count check removed as was wrong */
+ /* should make this check with receive history */
+ /* and compare there as per section 10.2 of RFC4342 */
+
+ /* new loss event detected */
+ /* calculate last interval length */
+ seq_temp = dccp_delta_seqno(head->dccplih_seqno, seq_loss);
+ entry = dccp_li_hist_entry_new(ccid3_li_hist, SLAB_ATOMIC);
+
+ if (entry == NULL) {
+ printk(KERN_CRIT "%s: out of memory\n",__FUNCTION__);
+ dump_stack();
return;
- li_tail->dccplih_interval = ccid3_hc_rx_calc_first_li(sk);
- } else
- LIMIT_NETDEBUG(KERN_WARNING "%s: FIXME: find end of "
- "interval\n", __FUNCTION__);
+ }
+
+ list_add(&entry->dccplih_node, &hcrx->ccid3hcrx_li_hist);
+
+ tail = hcrx->ccid3hcrx_li_hist.prev;
+ list_del(tail);
+ kmem_cache_free(ccid3_li_hist->dccplih_slab, tail);
+
+ /* Create the newest interval */
+ entry->dccplih_seqno = seq_loss;
+ entry->dccplih_interval = seq_temp;
+ entry->dccplih_win_count = win_loss;
+ }
}
-static void ccid3_hc_rx_detect_loss(struct sock *sk)
+static int ccid3_hc_rx_detect_loss(struct sock *sk,
+ struct dccp_rx_hist_entry *packet)
{
struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
- u8 win_loss;
- const u64 seq_loss = dccp_rx_hist_detect_loss(&hcrx->ccid3hcrx_hist,
- &hcrx->ccid3hcrx_li_hist,
- &win_loss);
+ struct dccp_rx_hist_entry *rx_hist = dccp_rx_hist_head(&hcrx->ccid3hcrx_hist);
+ u64 seqno = packet->dccphrx_seqno;
+ u64 tmp_seqno;
+ int loss = 0;
+ u8 ccval;
+
+
+ tmp_seqno = hcrx->ccid3hcrx_seqno_nonloss;
+
+ if (!rx_hist ||
+ follows48(packet->dccphrx_seqno, hcrx->ccid3hcrx_seqno_nonloss)) {
+ hcrx->ccid3hcrx_seqno_nonloss = seqno;
+ hcrx->ccid3hcrx_ccval_nonloss = packet->dccphrx_ccval;
+ goto detect_out;
+ }
+
- ccid3_hc_rx_update_li(sk, seq_loss, win_loss);
+ while (dccp_delta_seqno(hcrx->ccid3hcrx_seqno_nonloss, seqno)
+ > TFRC_RECV_NUM_LATE_LOSS) {
+ loss = 1;
+ ccid3_hc_rx_update_li(sk, hcrx->ccid3hcrx_seqno_nonloss,
+ hcrx->ccid3hcrx_ccval_nonloss);
+ tmp_seqno = hcrx->ccid3hcrx_seqno_nonloss;
+ dccp_inc_seqno(&tmp_seqno);
+ hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno;
+ dccp_inc_seqno(&tmp_seqno);
+ while (dccp_rx_hist_find_entry(&hcrx->ccid3hcrx_hist,
+ tmp_seqno, &ccval)) {
+ hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno;
+ hcrx->ccid3hcrx_ccval_nonloss = ccval;
+ dccp_inc_seqno(&tmp_seqno);
+ }
+ }
+
+ /* FIXME - this code could be simplified with above while */
+ /* but works at moment */
+ if (follows48(packet->dccphrx_seqno, hcrx->ccid3hcrx_seqno_nonloss)) {
+ hcrx->ccid3hcrx_seqno_nonloss = seqno;
+ hcrx->ccid3hcrx_ccval_nonloss = packet->dccphrx_ccval;
+ }
+
+detect_out:
+ dccp_rx_hist_add_packet(ccid3_rx_hist, &hcrx->ccid3hcrx_hist,
+ &hcrx->ccid3hcrx_li_hist, packet,
+ hcrx->ccid3hcrx_seqno_nonloss);
+ return loss;
}
static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
@@ -916,8 +1004,8 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
struct dccp_rx_hist_entry *packet;
struct timeval now;
u8 win_count;
- u32 p_prev, r_sample, t_elapsed;
- int ins;
+ u32 p_prev, rtt_prev, r_sample, t_elapsed;
+ int loss;
BUG_ON(hcrx == NULL ||
!(hcrx->ccid3hcrx_state == TFRC_RSTATE_NO_DATA ||
@@ -932,7 +1020,7 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
case DCCP_PKT_DATAACK:
if (opt_recv->dccpor_timestamp_echo == 0)
break;
- p_prev = hcrx->ccid3hcrx_rtt;
+ rtt_prev = hcrx->ccid3hcrx_rtt;
dccp_timestamp(sk, &now);
timeval_sub_usecs(&now, opt_recv->dccpor_timestamp_echo * 10);
r_sample = timeval_usecs(&now);
@@ -951,8 +1039,8 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
hcrx->ccid3hcrx_rtt = (hcrx->ccid3hcrx_rtt * 9) / 10 +
r_sample / 10;
- if (p_prev != hcrx->ccid3hcrx_rtt)
- ccid3_pr_debug("%s, New RTT=%luus, elapsed time=%u\n",
+ if (rtt_prev != hcrx->ccid3hcrx_rtt)
+ ccid3_pr_debug("%s, New RTT=%uus, elapsed time=%u\n",
dccp_role(sk), hcrx->ccid3hcrx_rtt,
opt_recv->dccpor_elapsed_time);
break;
@@ -973,8 +1061,7 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
win_count = packet->dccphrx_ccval;
- ins = dccp_rx_hist_add_packet(ccid3_rx_hist, &hcrx->ccid3hcrx_hist,
- &hcrx->ccid3hcrx_li_hist, packet);
+ loss = ccid3_hc_rx_detect_loss(sk, packet);
if (DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_ACK)
return;
@@ -991,7 +1078,7 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
case TFRC_RSTATE_DATA:
hcrx->ccid3hcrx_bytes_recv += skb->len -
dccp_hdr(skb)->dccph_doff * 4;
- if (ins != 0)
+ if (loss)
break;
dccp_timestamp(sk, &now);
@@ -1012,7 +1099,6 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
ccid3_pr_debug("%s, sk=%p(%s), data loss! Reacting...\n",
dccp_role(sk), sk, dccp_state_name(sk->sk_state));
- ccid3_hc_rx_detect_loss(sk);
p_prev = hcrx->ccid3hcrx_p;
/* Calculate loss event rate */
@@ -1022,6 +1108,9 @@ static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
/* Scaling up by 1000000 as fixed decimal */
if (i_mean != 0)
hcrx->ccid3hcrx_p = 1000000 / i_mean;
+ } else {
+ printk(KERN_CRIT "%s: empty loss hist\n",__FUNCTION__);
+ dump_stack();
}
if (hcrx->ccid3hcrx_p > p_prev) {
@@ -1230,7 +1319,7 @@ static __exit void ccid3_module_exit(void)
}
module_exit(ccid3_module_exit);
-MODULE_AUTHOR("Ian McDonald <iam4@cs.waikato.ac.nz>, "
+MODULE_AUTHOR("Ian McDonald <ian.mcdonald@jandi.co.nz>, "
"Arnaldo Carvalho de Melo <acme@ghostprotocols.net>");
MODULE_DESCRIPTION("DCCP TFRC CCID3 CCID");
MODULE_LICENSE("GPL");
diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h
index 5ade4f668b2..0a2cb7536d2 100644
--- a/net/dccp/ccids/ccid3.h
+++ b/net/dccp/ccids/ccid3.h
@@ -1,13 +1,13 @@
/*
* net/dccp/ccids/ccid3.h
*
- * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
+ * Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand.
*
* An implementation of the DCCP protocol
*
* This code has been developed by the University of Waikato WAND
* research group. For further information please see http://www.wand.net.nz/
- * or e-mail Ian McDonald - iam4@cs.waikato.ac.nz
+ * or e-mail Ian McDonald - ian.mcdonald@jandi.co.nz
*
* This code also uses code from Lulea University, rereleased as GPL by its
* authors:
@@ -120,9 +120,10 @@ struct ccid3_hc_rx_sock {
#define ccid3hcrx_x_recv ccid3hcrx_tfrc.tfrcrx_x_recv
#define ccid3hcrx_rtt ccid3hcrx_tfrc.tfrcrx_rtt
#define ccid3hcrx_p ccid3hcrx_tfrc.tfrcrx_p
- u64 ccid3hcrx_seqno_last_counter:48,
+ u64 ccid3hcrx_seqno_nonloss:48,
+ ccid3hcrx_ccval_nonloss:4,
ccid3hcrx_state:8,
- ccid3hcrx_last_counter:4;
+ ccid3hcrx_ccval_last_counter:4;
u32 ccid3hcrx_bytes_recv;
struct timeval ccid3hcrx_tstamp_last_feedback;
struct timeval ccid3hcrx_tstamp_last_ack;
diff --git a/net/dccp/ccids/lib/loss_interval.c b/net/dccp/ccids/lib/loss_interval.c
index 5d7b7d86438..906c81ab9d4 100644
--- a/net/dccp/ccids/lib/loss_interval.c
+++ b/net/dccp/ccids/lib/loss_interval.c
@@ -2,7 +2,7 @@
* net/dccp/ccids/lib/loss_interval.c
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* This program is free software; you can redistribute it and/or modify
@@ -12,6 +12,7 @@
*/
#include <linux/module.h>
+#include <net/sock.h>
#include "loss_interval.h"
@@ -90,13 +91,13 @@ u32 dccp_li_hist_calc_i_mean(struct list_head *list)
u32 w_tot = 0;
list_for_each_entry_safe(li_entry, li_next, list, dccplih_node) {
- if (i < DCCP_LI_HIST_IVAL_F_LENGTH) {
+ if (li_entry->dccplih_interval != ~0) {
i_tot0 += li_entry->dccplih_interval * dccp_li_hist_w[i];
w_tot += dccp_li_hist_w[i];
+ if (i != 0)
+ i_tot1 += li_entry->dccplih_interval * dccp_li_hist_w[i - 1];
}
- if (i != 0)
- i_tot1 += li_entry->dccplih_interval * dccp_li_hist_w[i - 1];
if (++i > DCCP_LI_HIST_IVAL_F_LENGTH)
break;
@@ -107,37 +108,36 @@ u32 dccp_li_hist_calc_i_mean(struct list_head *list)
i_tot = max(i_tot0, i_tot1);
- /* FIXME: Why do we do this? -Ian McDonald */
- if (i_tot * 4 < w_tot)
- i_tot = w_tot * 4;
+ if (!w_tot) {
+ LIMIT_NETDEBUG(KERN_WARNING "%s: w_tot = 0\n", __FUNCTION__);
+ return 1;
+ }
- return i_tot * 4 / w_tot;
+ return i_tot / w_tot;
}
EXPORT_SYMBOL_GPL(dccp_li_hist_calc_i_mean);
-struct dccp_li_hist_entry *dccp_li_hist_interval_new(struct dccp_li_hist *hist,
- struct list_head *list,
- const u64 seq_loss,
- const u8 win_loss)
+int dccp_li_hist_interval_new(struct dccp_li_hist *hist,
+ struct list_head *list, const u64 seq_loss, const u8 win_loss)
{
- struct dccp_li_hist_entry *tail = NULL, *entry;
+ struct dccp_li_hist_entry *entry;
int i;
- for (i = 0; i <= DCCP_LI_HIST_IVAL_F_LENGTH; ++i) {
+ for (i = 0; i < DCCP_LI_HIST_IVAL_F_LENGTH; i++) {
entry = dccp_li_hist_entry_new(hist, SLAB_ATOMIC);
if (entry == NULL) {
dccp_li_hist_purge(hist, list);
- return NULL;
+ dump_stack();
+ return 0;
}
- if (tail == NULL)
- tail = entry;
+ entry->dccplih_interval = ~0;
list_add(&entry->dccplih_node, list);
}
entry->dccplih_seqno = seq_loss;
entry->dccplih_win_count = win_loss;
- return tail;
+ return 1;
}
EXPORT_SYMBOL_GPL(dccp_li_hist_interval_new);
diff --git a/net/dccp/ccids/lib/loss_interval.h b/net/dccp/ccids/lib/loss_interval.h
index 43bf78269d1..0ae85f0340b 100644
--- a/net/dccp/ccids/lib/loss_interval.h
+++ b/net/dccp/ccids/lib/loss_interval.h
@@ -4,7 +4,7 @@
* net/dccp/ccids/lib/loss_interval.h
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005 Ian McDonald <ian.mcdonald@jandi.co.nz>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* This program is free software; you can redistribute it and/or modify it
@@ -52,9 +52,6 @@ extern void dccp_li_hist_purge(struct dccp_li_hist *hist,
extern u32 dccp_li_hist_calc_i_mean(struct list_head *list);
-extern struct dccp_li_hist_entry *
- dccp_li_hist_interval_new(struct dccp_li_hist *hist,
- struct list_head *list,
- const u64 seq_loss,
- const u8 win_loss);
+extern int dccp_li_hist_interval_new(struct dccp_li_hist *hist,
+ struct list_head *list, const u64 seq_loss, const u8 win_loss);
#endif /* _DCCP_LI_HIST_ */
diff --git a/net/dccp/ccids/lib/packet_history.c b/net/dccp/ccids/lib/packet_history.c
index ad98d6a322e..b876c9c81c6 100644
--- a/net/dccp/ccids/lib/packet_history.c
+++ b/net/dccp/ccids/lib/packet_history.c
@@ -1,13 +1,13 @@
/*
- * net/dccp/packet_history.h
+ * net/dccp/packet_history.c
*
- * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
+ * Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand.
*
* An implementation of the DCCP protocol
*
* This code has been developed by the University of Waikato WAND
* research group. For further information please see http://www.wand.net.nz/
- * or e-mail Ian McDonald - iam4@cs.waikato.ac.nz
+ * or e-mail Ian McDonald - ian.mcdonald@jandi.co.nz
*
* This code also uses code from Lulea University, rereleased as GPL by its
* authors:
@@ -112,64 +112,27 @@ struct dccp_rx_hist_entry *
EXPORT_SYMBOL_GPL(dccp_rx_hist_find_data_packet);
-int dccp_rx_hist_add_packet(struct dccp_rx_hist *hist,
+void dccp_rx_hist_add_packet(struct dccp_rx_hist *hist,
struct list_head *rx_list,
struct list_head *li_list,
- struct dccp_rx_hist_entry *packet)
+ struct dccp_rx_hist_entry *packet,
+ u64 nonloss_seqno)
{
- struct dccp_rx_hist_entry *entry, *next, *iter;
+ struct dccp_rx_hist_entry *entry, *next;
u8 num_later = 0;
- iter = dccp_rx_hist_head(rx_list);
- if (iter == NULL)
- dccp_rx_hist_add_entry(rx_list, packet);
- else {
- const u64 seqno = packet->dccphrx_seqno;
-
- if (after48(seqno, iter->dccphrx_seqno))
- dccp_rx_hist_add_entry(rx_list, packet);
- else {
- if (dccp_rx_hist_entry_data_packet(iter))
- num_later = 1;
-
- list_for_each_entry_continue(iter, rx_list,
- dccphrx_node) {
- if (after48(seqno, iter->dccphrx_seqno)) {
- dccp_rx_hist_add_entry(&iter->dccphrx_node,
- packet);
- goto trim_history;
- }
-
- if (dccp_rx_hist_entry_data_packet(iter))
- num_later++;
+ list_add(&packet->dccphrx_node, rx_list);
- if (num_later == TFRC_RECV_NUM_LATE_LOSS) {
- dccp_rx_hist_entry_delete(hist, packet);
- return 1;
- }
- }
-
- if (num_later < TFRC_RECV_NUM_LATE_LOSS)
- dccp_rx_hist_add_entry(rx_list, packet);
- /*
- * FIXME: else what? should we destroy the packet
- * like above?
- */
- }
- }
-
-trim_history:
- /*
- * Trim history (remove all packets after the NUM_LATE_LOSS + 1
- * data packets)
- */
num_later = TFRC_RECV_NUM_LATE_LOSS + 1;
if (!list_empty(li_list)) {
list_for_each_entry_safe(entry, next, rx_list, dccphrx_node) {
if (num_later == 0) {
- list_del_init(&entry->dccphrx_node);
- dccp_rx_hist_entry_delete(hist, entry);
+ if (after48(nonloss_seqno,
+ entry->dccphrx_seqno)) {
+ list_del_init(&entry->dccphrx_node);
+ dccp_rx_hist_entry_delete(hist, entry);
+ }
} else if (dccp_rx_hist_entry_data_packet(entry))
--num_later;
}
@@ -217,94 +180,10 @@ trim_history:
--num_later;
}
}
-
- return 0;
}
EXPORT_SYMBOL_GPL(dccp_rx_hist_add_packet);
-u64 dccp_rx_hist_detect_loss(struct list_head *rx_list,
- struct list_head *li_list, u8 *win_loss)
-{
- struct dccp_rx_hist_entry *entry, *next, *packet;
- struct dccp_rx_hist_entry *a_loss = NULL;
- struct dccp_rx_hist_entry *b_loss = NULL;
- u64 seq_loss = DCCP_MAX_SEQNO + 1;
- u8 num_later = TFRC_RECV_NUM_LATE_LOSS;
-
- list_for_each_entry_safe(entry, next, rx_list, dccphrx_node) {
- if (num_later == 0) {
- b_loss = entry;
- break;
- } else if (dccp_rx_hist_entry_data_packet(entry))
- --num_later;
- }
-
- if (b_loss == NULL)
- goto out;
-
- num_later = 1;
- list_for_each_entry_safe_continue(entry, next, rx_list, dccphrx_node) {
- if (num_later == 0) {
- a_loss = entry;
- break;
- } else if (dccp_rx_hist_entry_data_packet(entry))
- --num_later;
- }
-
- if (a_loss == NULL) {
- if (list_empty(li_list)) {
- /* no loss event have occured yet */
- LIMIT_NETDEBUG("%s: TODO: find a lost data packet by "
- "comparing to initial seqno\n",
- __FUNCTION__);
- goto out;
- } else {
- LIMIT_NETDEBUG("%s: Less than 4 data pkts in history!",
- __FUNCTION__);
- goto out;
- }
- }
-
- /* Locate a lost data packet */
- entry = packet = b_loss;
- list_for_each_entry_safe_continue(entry, next, rx_list, dccphrx_node) {
- u64 delta = dccp_delta_seqno(entry->dccphrx_seqno,
- packet->dccphrx_seqno);
-
- if (delta != 0) {
- if (dccp_rx_hist_entry_data_packet(packet))
- --delta;
- /*
- * FIXME: check this, probably this % usage is because
- * in earlier drafts the ndp count was just 8 bits
- * long, but now it cam be up to 24 bits long.
- */
-#if 0
- if (delta % DCCP_NDP_LIMIT !=
- (packet->dccphrx_ndp -
- entry->dccphrx_ndp) % DCCP_NDP_LIMIT)
-#endif
- if (delta != packet->dccphrx_ndp - entry->dccphrx_ndp) {
- seq_loss = entry->dccphrx_seqno;
- dccp_inc_seqno(&seq_loss);
- }
- }
- packet = entry;
- if (packet == a_loss)
- break;
- }
-out:
- if (seq_loss != DCCP_MAX_SEQNO + 1)
- *win_loss = a_loss->dccphrx_ccval;
- else
- *win_loss = 0; /* Paranoia */
-
- return seq_loss;
-}
-
-EXPORT_SYMBOL_GPL(dccp_rx_hist_detect_loss);
-
struct dccp_tx_hist *dccp_tx_hist_new(const char *name)
{
struct dccp_tx_hist *hist = kmalloc(sizeof(*hist), GFP_ATOMIC);
@@ -365,6 +244,25 @@ struct dccp_tx_hist_entry *
EXPORT_SYMBOL_GPL(dccp_tx_hist_find_entry);
+int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq,
+ u8 *ccval)
+{
+ struct dccp_rx_hist_entry *packet = NULL, *entry;
+
+ list_for_each_entry(entry, list, dccphrx_node)
+ if (entry->dccphrx_seqno == seq) {
+ packet = entry;
+ break;
+ }
+
+ if (packet)
+ *ccval = packet->dccphrx_ccval;
+
+ return packet != NULL;
+}
+
+EXPORT_SYMBOL_GPL(dccp_rx_hist_find_entry);
+
void dccp_tx_hist_purge_older(struct dccp_tx_hist *hist,
struct list_head *list,
struct dccp_tx_hist_entry *packet)
@@ -391,7 +289,7 @@ void dccp_tx_hist_purge(struct dccp_tx_hist *hist, struct list_head *list)
EXPORT_SYMBOL_GPL(dccp_tx_hist_purge);
-MODULE_AUTHOR("Ian McDonald <iam4@cs.waikato.ac.nz>, "
+MODULE_AUTHOR("Ian McDonald <ian.mcdonald@jandi.co.nz>, "
"Arnaldo Carvalho de Melo <acme@ghostprotocols.net>");
MODULE_DESCRIPTION("DCCP TFRC library");
MODULE_LICENSE("GPL");
diff --git a/net/dccp/ccids/lib/packet_history.h b/net/dccp/ccids/lib/packet_history.h
index 673c209e4e8..067cf1c85a3 100644
--- a/net/dccp/ccids/lib/packet_history.h
+++ b/net/dccp/ccids/lib/packet_history.h
@@ -1,13 +1,13 @@
/*
* net/dccp/packet_history.h
*
- * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
+ * Copyright (c) 2005-6 The University of Waikato, Hamilton, New Zealand.
*
* An implementation of the DCCP protocol
*
* This code has been developed by the University of Waikato WAND
* research group. For further information please see http://www.wand.net.nz/
- * or e-mail Ian McDonald - iam4@cs.waikato.ac.nz
+ * or e-mail Ian McDonald - ian.mcdonald@jandi.co.nz
*
* This code also uses code from Lulea University, rereleased as GPL by its
* authors:
@@ -106,6 +106,8 @@ static inline void dccp_tx_hist_entry_delete(struct dccp_tx_hist *hist,
extern struct dccp_tx_hist_entry *
dccp_tx_hist_find_entry(const struct list_head *list,
const u64 seq);
+extern int dccp_rx_hist_find_entry(const struct list_head *list, const u64 seq,
+ u8 *ccval);
static inline void dccp_tx_hist_add_entry(struct list_head *list,
struct dccp_tx_hist_entry *entry)
@@ -164,12 +166,6 @@ static inline void dccp_rx_hist_entry_delete(struct dccp_rx_hist *hist,
extern void dccp_rx_hist_purge(struct dccp_rx_hist *hist,
struct list_head *list);
-static inline void dccp_rx_hist_add_entry(struct list_head *list,
- struct dccp_rx_hist_entry *entry)
-{
- list_add(&entry->dccphrx_node, list);
-}
-
static inline struct dccp_rx_hist_entry *
dccp_rx_hist_head(struct list_head *list)
{
@@ -188,10 +184,11 @@ static inline int
entry->dccphrx_type == DCCP_PKT_DATAACK;
}
-extern int dccp_rx_hist_add_packet(struct dccp_rx_hist *hist,
+extern void dccp_rx_hist_add_packet(struct dccp_rx_hist *hist,
struct list_head *rx_list,
struct list_head *li_list,
- struct dccp_rx_hist_entry *packet);
+ struct dccp_rx_hist_entry *packet,
+ u64 nonloss_seqno);
extern u64 dccp_rx_hist_detect_loss(struct list_head *rx_list,
struct list_head *li_list, u8 *win_loss);
diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h
index 130c4c40cfe..45f30f59ea2 100644
--- a/net/dccp/ccids/lib/tfrc.h
+++ b/net/dccp/ccids/lib/tfrc.h
@@ -4,7 +4,7 @@
* net/dccp/ccids/lib/tfrc.h
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005 Ian McDonald <ian.mcdonald@jandi.co.nz>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon
*
diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c
index 4fd2ebebf5a..44076e0c659 100644
--- a/net/dccp/ccids/lib/tfrc_equation.c
+++ b/net/dccp/ccids/lib/tfrc_equation.c
@@ -2,7 +2,7 @@
* net/dccp/ccids/lib/tfrc_equation.c
*
* Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005 Ian McDonald <ian.mcdonald@jandi.co.nz>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon
*
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index d00a2f4ee5d..a5c5475724c 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -5,7 +5,7 @@
*
* An implementation of the DCCP protocol
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as
@@ -81,6 +81,14 @@ static inline u64 max48(const u64 seq1, const u64 seq2)
return after48(seq1, seq2) ? seq1 : seq2;
}
+/* is seq1 next seqno after seq2 */
+static inline int follows48(const u64 seq1, const u64 seq2)
+{
+ int diff = (seq1 & 0xFFFF) - (seq2 & 0xFFFF);
+
+ return diff==1;
+}
+
enum {
DCCP_MIB_NUM = 0,
DCCP_MIB_ACTIVEOPENS, /* ActiveOpens */
diff --git a/net/dccp/options.c b/net/dccp/options.c
index daf72bb671f..07a34696ac9 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -4,7 +4,7 @@
* An implementation of the DCCP protocol
* Copyright (c) 2005 Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
- * Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
+ * Copyright (c) 2005 Ian McDonald <ian.mcdonald@jandi.co.nz>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index df4854cf598..8d1d7a6e72a 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -236,7 +236,7 @@ unsigned int arpt_do_table(struct sk_buff **pskb,
struct arpt_entry *e, *back;
const char *indev, *outdev;
void *table_base;
- struct xt_table_info *private = table->private;
+ struct xt_table_info *private;
/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
if (!pskb_may_pull((*pskb), (sizeof(struct arphdr) +
@@ -248,6 +248,7 @@ unsigned int arpt_do_table(struct sk_buff **pskb,
outdev = out ? out->name : nulldevname;
read_lock_bh(&table->lock);
+ private = table->private;
table_base = (void *)private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
back = get_entry(table_base, private->underflow[hook]);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 507adefbc17..b4f3ffe1b3b 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -201,6 +201,7 @@ void tcp_select_initial_window(int __space, __u32 mss,
* See RFC1323 for an explanation of the limit to 14
*/
space = max_t(u32, sysctl_tcp_rmem[2], sysctl_rmem_max);
+ space = min_t(u32, space, *window_clamp);
while (space > 65535 && (*rcv_wscale) < 14) {
space >>= 1;
(*rcv_wscale)++;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index b843a650be7..802a1a6b103 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -944,7 +944,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
* comment in that function for the gory details. -acme
*/
- sk->sk_gso_type = SKB_GSO_TCPV6;
+ newsk->sk_gso_type = SKB_GSO_TCPV6;
__ip6_dst_store(newsk, dst, NULL);
newtcp6sk = (struct tcp6_sock *)newsk;
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 4f11f585820..17b509282cf 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -806,38 +806,26 @@ no_mem:
/* Helper to create ABORT with a SCTP_ERROR_USER_ABORT error. */
struct sctp_chunk *sctp_make_abort_user(const struct sctp_association *asoc,
- const struct sctp_chunk *chunk,
- const struct msghdr *msg)
+ const struct msghdr *msg,
+ size_t paylen)
{
struct sctp_chunk *retval;
- void *payload = NULL, *payoff;
- size_t paylen = 0;
- struct iovec *iov = NULL;
- int iovlen = 0;
-
- if (msg) {
- iov = msg->msg_iov;
- iovlen = msg->msg_iovlen;
- paylen = get_user_iov_size(iov, iovlen);
- }
+ void *payload = NULL;
+ int err;
- retval = sctp_make_abort(asoc, chunk, sizeof(sctp_errhdr_t) + paylen);
+ retval = sctp_make_abort(asoc, NULL, sizeof(sctp_errhdr_t) + paylen);
if (!retval)
goto err_chunk;
if (paylen) {
/* Put the msg_iov together into payload. */
- payload = kmalloc(paylen, GFP_ATOMIC);
+ payload = kmalloc(paylen, GFP_KERNEL);
if (!payload)
goto err_payload;
- payoff = payload;
- for (; iovlen > 0; --iovlen) {
- if (copy_from_user(payoff, iov->iov_base,iov->iov_len))
- goto err_copy;
- payoff += iov->iov_len;
- iov++;
- }
+ err = memcpy_fromiovec(payload, msg->msg_iov, paylen);
+ if (err < 0)
+ goto err_copy;
}
sctp_init_cause(retval, SCTP_ERROR_USER_ABORT, payload, paylen);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index ead3f1b0ea3..5b5ae795832 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -4031,18 +4031,12 @@ sctp_disposition_t sctp_sf_do_9_1_prm_abort(
* from its upper layer, but retransmits data to the far end
* if necessary to fill gaps.
*/
- struct msghdr *msg = arg;
- struct sctp_chunk *abort;
+ struct sctp_chunk *abort = arg;
sctp_disposition_t retval;
retval = SCTP_DISPOSITION_CONSUME;
- /* Generate ABORT chunk to send the peer. */
- abort = sctp_make_abort_user(asoc, NULL, msg);
- if (!abort)
- retval = SCTP_DISPOSITION_NOMEM;
- else
- sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
/* Even if we can't send the ABORT due to low memory delete the
* TCB. This is a departure from our typical NOMEM handling.
@@ -4166,8 +4160,7 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort(
void *arg,
sctp_cmd_seq_t *commands)
{
- struct msghdr *msg = arg;
- struct sctp_chunk *abort;
+ struct sctp_chunk *abort = arg;
sctp_disposition_t retval;
/* Stop T1-init timer */
@@ -4175,12 +4168,7 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort(
SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
retval = SCTP_DISPOSITION_CONSUME;
- /* Generate ABORT chunk to send the peer */
- abort = sctp_make_abort_user(asoc, NULL, msg);
- if (!abort)
- retval = SCTP_DISPOSITION_NOMEM;
- else
- sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
SCTP_STATE(SCTP_STATE_CLOSED));
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 54722e622e6..fde3f55bfd4 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1520,8 +1520,16 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
goto out_unlock;
}
if (sinfo_flags & SCTP_ABORT) {
+ struct sctp_chunk *chunk;
+
+ chunk = sctp_make_abort_user(asoc, msg, msg_len);
+ if (!chunk) {
+ err = -ENOMEM;
+ goto out_unlock;
+ }
+
SCTP_DEBUG_PRINTK("Aborting association: %p\n", asoc);
- sctp_primitive_ABORT(asoc, msg);
+ sctp_primitive_ABORT(asoc, chunk);
err = 0;
goto out_unlock;
}
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 4a9aa9393b9..ef1cf5b476c 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -718,8 +718,7 @@ gss_destroy(struct rpc_auth *auth)
auth, auth->au_flavor);
gss_auth = container_of(auth, struct gss_auth, rpc_auth);
- rpc_unlink(gss_auth->path);
- dput(gss_auth->dentry);
+ rpc_unlink(gss_auth->dentry);
gss_auth->dentry = NULL;
gss_mech_put(gss_auth->mech);
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index d6409e75721..3e19d321067 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -183,8 +183,7 @@ rpc_new_client(struct rpc_xprt *xprt, char *servname,
out_no_auth:
if (!IS_ERR(clnt->cl_dentry)) {
- rpc_rmdir(clnt->cl_pathname);
- dput(clnt->cl_dentry);
+ rpc_rmdir(clnt->cl_dentry);
rpc_put_mount();
}
out_no_path:
@@ -251,10 +250,8 @@ rpc_clone_client(struct rpc_clnt *clnt)
new->cl_autobind = 0;
new->cl_oneshot = 0;
new->cl_dead = 0;
- if (!IS_ERR(new->cl_dentry)) {
+ if (!IS_ERR(new->cl_dentry))
dget(new->cl_dentry);
- rpc_get_mount();
- }
rpc_init_rtt(&new->cl_rtt_default, clnt->cl_xprt->timeout.to_initval);
if (new->cl_auth)
atomic_inc(&new->cl_auth->au_count);
@@ -317,11 +314,15 @@ rpc_destroy_client(struct rpc_clnt *clnt)
clnt->cl_auth = NULL;
}
if (clnt->cl_parent != clnt) {
+ if (!IS_ERR(clnt->cl_dentry))
+ dput(clnt->cl_dentry);
rpc_destroy_client(clnt->cl_parent);
goto out_free;
}
- if (clnt->cl_pathname[0])
- rpc_rmdir(clnt->cl_pathname);
+ if (!IS_ERR(clnt->cl_dentry)) {
+ rpc_rmdir(clnt->cl_dentry);
+ rpc_put_mount();
+ }
if (clnt->cl_xprt) {
xprt_destroy(clnt->cl_xprt);
clnt->cl_xprt = NULL;
@@ -331,10 +332,6 @@ rpc_destroy_client(struct rpc_clnt *clnt)
out_free:
rpc_free_iostats(clnt->cl_metrics);
clnt->cl_metrics = NULL;
- if (!IS_ERR(clnt->cl_dentry)) {
- dput(clnt->cl_dentry);
- rpc_put_mount();
- }
kfree(clnt);
return 0;
}
@@ -1184,6 +1181,17 @@ call_verify(struct rpc_task *task)
u32 *p = iov->iov_base, n;
int error = -EACCES;
+ if ((task->tk_rqstp->rq_rcv_buf.len & 3) != 0) {
+ /* RFC-1014 says that the representation of XDR data must be a
+ * multiple of four bytes
+ * - if it isn't pointer subtraction in the NFS client may give
+ * undefined results
+ */
+ printk(KERN_WARNING
+ "call_verify: XDR representation not a multiple of"
+ " 4 bytes: 0x%x\n", task->tk_rqstp->rq_rcv_buf.len);
+ goto out_eio;
+ }
if ((len -= 3) < 0)
goto out_overflow;
p += 1; /* skip XID */
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index a3bd2db2e02..0b1a1ac8a4b 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -539,6 +539,7 @@ repeat:
rpc_close_pipes(dentry->d_inode);
simple_unlink(dir, dentry);
}
+ inode_dir_notify(dir, DN_DELETE);
dput(dentry);
} while (n);
goto repeat;
@@ -610,8 +611,8 @@ __rpc_rmdir(struct inode *dir, struct dentry *dentry)
int error;
shrink_dcache_parent(dentry);
- if (dentry->d_inode)
- rpc_close_pipes(dentry->d_inode);
+ if (d_unhashed(dentry))
+ return 0;
if ((error = simple_rmdir(dir, dentry)) != 0)
return error;
if (!error) {
@@ -684,28 +685,20 @@ err_dput:
}
int
-rpc_rmdir(char *path)
+rpc_rmdir(struct dentry *dentry)
{
- struct nameidata nd;
- struct dentry *dentry;
+ struct dentry *parent;
struct inode *dir;
int error;
- if ((error = rpc_lookup_parent(path, &nd)) != 0)
- return error;
- dir = nd.dentry->d_inode;
+ parent = dget_parent(dentry);
+ dir = parent->d_inode;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- dentry = lookup_one_len(nd.last.name, nd.dentry, nd.last.len);
- if (IS_ERR(dentry)) {
- error = PTR_ERR(dentry);
- goto out_release;
- }
rpc_depopulate(dentry);
error = __rpc_rmdir(dir, dentry);
dput(dentry);
-out_release:
mutex_unlock(&dir->i_mutex);
- rpc_release_path(&nd);
+ dput(parent);
return error;
}
@@ -746,32 +739,26 @@ err_dput:
}
int
-rpc_unlink(char *path)
+rpc_unlink(struct dentry *dentry)
{
- struct nameidata nd;
- struct dentry *dentry;
+ struct dentry *parent;
struct inode *dir;
- int error;
+ int error = 0;
- if ((error = rpc_lookup_parent(path, &nd)) != 0)
- return error;
- dir = nd.dentry->d_inode;
+ parent = dget_parent(dentry);
+ dir = parent->d_inode;
mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
- dentry = lookup_one_len(nd.last.name, nd.dentry, nd.last.len);
- if (IS_ERR(dentry)) {
- error = PTR_ERR(dentry);
- goto out_release;
- }
- d_drop(dentry);
- if (dentry->d_inode) {
- rpc_close_pipes(dentry->d_inode);
- error = simple_unlink(dir, dentry);
+ if (!d_unhashed(dentry)) {
+ d_drop(dentry);
+ if (dentry->d_inode) {
+ rpc_close_pipes(dentry->d_inode);
+ error = simple_unlink(dir, dentry);
+ }
+ inode_dir_notify(dir, DN_DELETE);
}
dput(dentry);
- inode_dir_notify(dir, DN_DELETE);
-out_release:
mutex_unlock(&dir->i_mutex);
- rpc_release_path(&nd);
+ dput(parent);
return error;
}