firewire: ohci: wait for PHY register accesses to complete

Rather than having the arbitrary msleep(2) pause, let read_phy_reg()
loop until the link--phy access was finished.

Factor write_phy_reg() out of ohci_update_phy_reg() and of
read_paged_phy_reg() and let it loop too until the link--phy access was
finished.

Like in the older ohci1394 driver, a timeout of 100 milliseconds is
chosen.  Unlike the old driver, we sleep instead of busy-wait in each
waiting loop iteration.  Instead of a loop, the waiting could probably
also be implemented interrupt driven, but why bother.  It would require
up and running interrupt handling before the link was fully configured
and enabled.

Also modify functions a bit:  Error return and value return can be
combined in read_phy_reg() since the domain of values is only u8.
Likewise in read_paged_phy_reg().

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

1 files changed, 57 insertions, 55 deletions

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 6a27a0ef3b6..5bbf42eb3f9 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -463,35 +463,51 @@ static inline void flush_writes(const struct fw_ohci *ohci)
 	reg_read(ohci, OHCI1394_Version);
 }
 
-static int read_phy_reg(struct fw_card *card, int addr, u32 *value)
+static int read_phy_reg(struct fw_ohci *ohci, int addr)
 {
-	struct fw_ohci *ohci = fw_ohci(card);
 	u32 val;
+	int i;
 
 	reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
-	flush_writes(ohci);
-	msleep(2);
-	val = reg_read(ohci, OHCI1394_PhyControl);
-	if ((val & OHCI1394_PhyControl_ReadDone) == 0) {
-		fw_error("failed to read phy reg bits\n");
-		return -EBUSY;
+	for (i = 0; i < 10; i++) {
+		val = reg_read(ohci, OHCI1394_PhyControl);
+		if (val & OHCI1394_PhyControl_ReadDone)
+			return OHCI1394_PhyControl_ReadData(val);
+
+		msleep(1);
 	}
+	fw_error("failed to read phy reg\n");
 
-	*value = OHCI1394_PhyControl_ReadData(val);
+	return -EBUSY;
+}
 
-	return 0;
+static int write_phy_reg(const struct fw_ohci *ohci, int addr, u32 val)
+{
+	int i;
+
+	reg_write(ohci, OHCI1394_PhyControl,
+		  OHCI1394_PhyControl_Write(addr, val));
+	for (i = 0; i < 100; i++) {
+		val = reg_read(ohci, OHCI1394_PhyControl);
+		if (!(val & OHCI1394_PhyControl_WritePending))
+			return 0;
+
+		msleep(1);
+	}
+	fw_error("failed to write phy reg\n");
+
+	return -EBUSY;
 }
 
 static int ohci_update_phy_reg(struct fw_card *card, int addr,
 			       int clear_bits, int set_bits)
 {
 	struct fw_ohci *ohci = fw_ohci(card);
-	u32 old;
-	int err;
+	int ret;
 
-	err = read_phy_reg(card, addr, &old);
-	if (err < 0)
-		return err;
+	ret = read_phy_reg(ohci, addr);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * The interrupt status bits are cleared by writing a one bit.
@@ -500,32 +516,18 @@ static int ohci_update_phy_reg(struct fw_card *card, int addr,
 	if (addr == 5)
 		clear_bits |= PHY_INT_STATUS_BITS;
 
-	old = (old & ~clear_bits) | set_bits;
-	reg_write(ohci, OHCI1394_PhyControl,
-		  OHCI1394_PhyControl_Write(addr, old));
-
-	return 0;
+	return write_phy_reg(ohci, addr, (ret & ~clear_bits) | set_bits);
 }
 
-static int read_paged_phy_reg(struct fw_card *card,
-			      int page, int addr, u32 *value)
+static int read_paged_phy_reg(struct fw_ohci *ohci, int page, int addr)
 {
-	struct fw_ohci *ohci = fw_ohci(card);
-	u32 reg;
-	int err;
+	int ret;
 
-	err = ohci_update_phy_reg(card, 7, PHY_PAGE_SELECT, page << 5);
-	if (err < 0)
-		return err;
-	flush_writes(ohci);
-	msleep(2);
-	reg = reg_read(ohci, OHCI1394_PhyControl);
-	if ((reg & OHCI1394_PhyControl_WritePending) != 0) {
-		fw_error("failed to write phy reg bits\n");
-		return -EBUSY;
-	}
+	ret = ohci_update_phy_reg(&ohci->card, 7, PHY_PAGE_SELECT, page << 5);
+	if (ret < 0)
+		return ret;
 
-	return read_phy_reg(card, addr, value);
+	return read_phy_reg(ohci, addr);
 }
 
 static int ar_context_add_page(struct ar_context *ctx)
@@ -1538,8 +1540,7 @@ static void copy_config_rom(__be32 *dest, const __be32 *src, size_t length)
 static int configure_1394a_enhancements(struct fw_ohci *ohci)
 {
 	bool enable_1394a;
-	u32 reg, phy_compliance;
-	int clear, set, offset;
+	int ret, clear, set, offset;
 
 	/* Check if the driver should configure link and PHY. */
 	if (!(reg_read(ohci, OHCI1394_HCControlSet) &
@@ -1548,12 +1549,14 @@ static int configure_1394a_enhancements(struct fw_ohci *ohci)
 
 	/* Paranoia: check whether the PHY supports 1394a, too. */
 	enable_1394a = false;
-	if (read_phy_reg(&ohci->card, 2, &reg) < 0)
-		return -EIO;
-	if ((reg & PHY_EXTENDED_REGISTERS) == PHY_EXTENDED_REGISTERS) {
-		if (read_paged_phy_reg(&ohci->card, 1, 8, &phy_compliance) < 0)
-			return -EIO;
-		if (phy_compliance >= 1)
+	ret = read_phy_reg(ohci, 2);
+	if (ret < 0)
+		return ret;
+	if ((ret & PHY_EXTENDED_REGISTERS) == PHY_EXTENDED_REGISTERS) {
+		ret = read_paged_phy_reg(ohci, 1, 8);
+		if (ret < 0)
+			return ret;
+		if (ret >= 1)
 			enable_1394a = true;
 	}
 
@@ -1568,10 +1571,9 @@ static int configure_1394a_enhancements(struct fw_ohci *ohci)
 		clear = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI;
 		set = 0;
 	}
-	if (ohci_update_phy_reg(&ohci->card, 5, clear, set) < 0)
-		return -EIO;
-	flush_writes(ohci);
-	msleep(2);
+	ret = ohci_update_phy_reg(&ohci->card, 5, clear, set);
+	if (ret < 0)
+		return ret;
 
 	if (enable_1394a)
 		offset = OHCI1394_HCControlSet;
@@ -1592,7 +1594,7 @@ static int ohci_enable(struct fw_card *card,
 	struct fw_ohci *ohci = fw_ohci(card);
 	struct pci_dev *dev = to_pci_dev(card->device);
 	u32 lps;
-	int i, err;
+	int i, ret;
 
 	if (software_reset(ohci)) {
 		fw_error("Failed to reset ohci card.\n");
@@ -1656,14 +1658,14 @@ static int ohci_enable(struct fw_card *card,
 	if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
 		reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
 
-	err = configure_1394a_enhancements(ohci);
-	if (err < 0)
-		return err;
+	ret = configure_1394a_enhancements(ohci);
+	if (ret < 0)
+		return ret;
 
 	/* Activate link_on bit and contender bit in our self ID packets.*/
-	if (ohci_update_phy_reg(card, 4, 0,
-				PHY_LINK_ACTIVE | PHY_CONTENDER) < 0)
-		return -EIO;
+	ret = ohci_update_phy_reg(card, 4, 0, PHY_LINK_ACTIVE | PHY_CONTENDER);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * When the link is not yet enabled, the atomic config rom