summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>2006-06-20 21:33:02 +0900
committerRalf Baechle <ralf@linux-mips.org>2006-06-29 21:10:49 +0100
commit0ef831b1ff1ff0bcd8bf5b1890913ef6bb263250 (patch)
tree5504aa95d4b00ede334c773752a0b60a068cf23c
parent4277ff5ee55694f67d9c6586bb4c06991e221a68 (diff)
downloadlinux-3.10-0ef831b1ff1ff0bcd8bf5b1890913ef6bb263250.tar.gz
linux-3.10-0ef831b1ff1ff0bcd8bf5b1890913ef6bb263250.tar.bz2
linux-3.10-0ef831b1ff1ff0bcd8bf5b1890913ef6bb263250.zip
[MIPS] Removes unused functions for GT64120
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r--arch/mips/gt64120/common/Makefile1
-rw-r--r--arch/mips/gt64120/common/pci.c147
2 files changed, 0 insertions, 148 deletions
diff --git a/arch/mips/gt64120/common/Makefile b/arch/mips/gt64120/common/Makefile
index eba5051015a..1ef676e22ab 100644
--- a/arch/mips/gt64120/common/Makefile
+++ b/arch/mips/gt64120/common/Makefile
@@ -3,4 +3,3 @@
#
obj-y += time.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/gt64120/common/pci.c b/arch/mips/gt64120/common/pci.c
deleted file mode 100644
index e9e5419a0d5..00000000000
--- a/arch/mips/gt64120/common/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Galileo Evaluation Boards PCI support.
- *
- * The general-purpose functions to read/write and configure the GT64120A's
- * PCI registers (function names start with pci0 or pci1) are either direct
- * copies of functions written by Galileo Technology, or are modifications
- * of their functions to work with Linux 2.4 vs Linux 2.2. These functions
- * are Copyright - Galileo Technology.
- *
- * Other functions are derived from other MIPS PCI implementations, or were
- * written by RidgeRun, Inc, Copyright (C) 2000 RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <asm/gt64120.h>
-
-#define SELF 0
-
-/*
- * pciXReadConfigReg - Read from a PCI configuration register
- * - Make sure the GT is configured as a master before
- * reading from another device on the PCI.
- * - The function takes care of Big/Little endian conversion.
- * INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
- * spec)
- * pciDevNum: The device number needs to be addressed.
- * RETURNS: data , if the data == 0xffffffff check the master abort bit in the
- * cause register to make sure the data is valid
- *
- * Configuration Address 0xCF8:
- *
- * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
- * |congif|Reserved| Bus |Device|Function|Register|00|
- * |Enable| |Number|Number| Number | Number | | <=field Name
- *
- */
-static unsigned int pci0ReadConfigReg(int offset, struct pci_dev *device)
-{
- unsigned int DataForRegCf8;
- unsigned int data;
-
- DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
- (PCI_FUNC(device->devfn) << 8) |
- (offset & ~0x3)) | 0x80000000;
- GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
-
- /*
- * The casual observer might wonder why the READ is duplicated here,
- * rather than immediately following the WRITE, and just have the swap
- * in the "if". That's because there is a latency problem with trying
- * to read immediately after setting up the address register. The "if"
- * check gives enough time for the address to stabilize, so the READ
- * can work.
- */
- if (PCI_SLOT(device->devfn) == SELF) /* This board */
- return GT_READ(GT_PCI0_CFGDATA_OFS);
- else /* PCI is little endian so swap the Data. */
- return __GT_READ(GT_PCI0_CFGDATA_OFS);
-}
-
-/*
- * pciXWriteConfigReg - Write to a PCI configuration register
- * - Make sure the GT is configured as a master before
- * writingto another device on the PCI.
- * - The function takes care of Big/Little endian conversion.
- * Inputs: unsigned int regOffset: The register offset as it apears in the
- * GT spec
- * (or any other PCI device spec)
- * pciDevNum: The device number needs to be addressed.
- *
- * Configuration Address 0xCF8:
- *
- * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
- * |congif|Reserved| Bus |Device|Function|Register|00|
- * |Enable| |Number|Number| Number | Number | | <=field Name
- *
- */
-static void pci0WriteConfigReg(unsigned int offset,
- struct pci_dev *device, unsigned int data)
-{
- unsigned int DataForRegCf8;
-
- DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) |
- (PCI_FUNC(device->devfn) << 8) |
- (offset & ~0x3)) | 0x80000000;
- GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8);
-
- if (PCI_SLOT(device->devfn) == SELF) /* This board */
- GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
- else /* configuration Transaction over the pci. */
- __GT_WRITE(GT_PCI0_CFGDATA_OFS, data);
-}
-
-extern struct pci_ops gt64120_pci_ops;
-
-void __init pcibios_init(void)
-{
- u32 tmp;
- struct pci_dev controller;
-
- controller.devfn = SELF;
-
- tmp = GT_READ(GT_PCI0_CMD_OFS); /* Huh??? -- Ralf */
- tmp = GT_READ(GT_PCI0_BARE_OFS);
-
- /*
- * You have to enable bus mastering to configure any other
- * card on the bus.
- */
- tmp = pci0ReadConfigReg(PCI_COMMAND, &controller);
- tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
- pci0WriteConfigReg(PCI_COMMAND, &controller, tmp);
-
- /*
- * Reset PCI I/O and PCI MEM values to ones supported by EVM.
- */
- ioport_resource.start = GT_PCI_IO_BASE;
- ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1;
- iomem_resource.start = GT_PCI_MEM_BASE;
- iomem_resource.end = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1;
-
- pci_scan_bus(0, &gt64120_pci_ops, NULL);
-}