[PATCH] Update devices.txt

Update Documentation/devices.txt with a new version from the LANANA site
http://www.lanana.org/docs/device-list/devices-2.6+.txt

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Torben Mathiasen <device@lanana.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 111 insertions, 24 deletions

diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index b369a8c46a7..b2f593fc76c 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -3,7 +3,7 @@
 
 	     Maintained by Torben Mathiasen <device@lanana.org>
 
-		      Last revised: 25 January 2005
+		      Last revised: 01 March 2006
 
 This list is the Linux Device List, the official registry of allocated
 device numbers and /dev directory nodes for the Linux operating
@@ -94,7 +94,6 @@ Your cooperation is appreciated.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asyncronous I/O notification interface
 		 11 = /dev/kmsg		Writes to this come out as printk's
-		 12 = /dev/oldmem	Access to crash dump from kexec kernel
   1 block	RAM disk
 		  0 = /dev/ram0		First RAM disk
 		  1 = /dev/ram1		Second RAM disk
@@ -262,13 +261,13 @@ Your cooperation is appreciated.
 		NOTE: These devices permit both read and write access.
 
   7 block	Loopback devices
-		  0 = /dev/loop0	First loopback device
-		  1 = /dev/loop1	Second loopback device
+		  0 = /dev/loop0	First loop device
+		  1 = /dev/loop1	Second loop device
 		    ...
 
-		The loopback devices are used to mount filesystems not
+		The loop devices are used to mount filesystems not
 		associated with block devices.	The binding to the
-		loopback devices is handled by mount(8) or losetup(8).
+		loop devices is handled by mount(8) or losetup(8).
 
   8 block	SCSI disk devices (0-15)
 		  0 = /dev/sda		First SCSI disk whole disk
@@ -943,7 +942,7 @@ Your cooperation is appreciated.
 		240 = /dev/ftlp		FTL on 16th Memory Technology Device 
 
 		Partitions are handled in the same way as for IDE
-		disks (see major number 3) expect that the partition
+		disks (see major number 3) except that the partition
 		limit is 15 rather than 63 per disk (same as SCSI.)
 
  45 char	isdn4linux ISDN BRI driver
@@ -1168,7 +1167,7 @@ Your cooperation is appreciated.
 		The filename of the encrypted container and the passwords
 		are sent via ioctls (using the sdmount tool) to the master
 		node which then activates them via one of the
-		/dev/scramdisk/x nodes for loopback mounting (all handled
+		/dev/scramdisk/x nodes for loop mounting (all handled
 		through the sdmount tool).
 
 		Requested by: andy@scramdisklinux.org
@@ -2538,18 +2537,32 @@ Your cooperation is appreciated.
 		  0 = /dev/usb/lp0	First USB printer
 		    ...
 		 15 = /dev/usb/lp15	16th USB printer
-		 16 = /dev/usb/mouse0	First USB mouse
-		    ...
-		 31 = /dev/usb/mouse15	16th USB mouse
-		 32 = /dev/usb/ez0	First USB firmware loader
-		    ...
-		 47 = /dev/usb/ez15	16th USB firmware loader
 		 48 = /dev/usb/scanner0	First USB scanner
 		    ...
 		 63 = /dev/usb/scanner15 16th USB scanner
 		 64 = /dev/usb/rio500	Diamond Rio 500
 		 65 = /dev/usb/usblcd	USBLCD Interface (info@usblcd.de)
 		 66 = /dev/usb/cpad0	Synaptics cPad (mouse/LCD)
+		 96 = /dev/usb/hiddev0	1st USB HID device
+		    ...
+		111 = /dev/usb/hiddev15	16th USB HID device
+		112 = /dev/usb/auer0	1st auerswald ISDN device
+		    ...
+		127 = /dev/usb/auer15	16th auerswald ISDN device
+		128 = /dev/usb/brlvgr0	First Braille Voyager device
+		    ...
+		131 = /dev/usb/brlvgr3	Fourth Braille Voyager device
+		132 = /dev/usb/idmouse	ID Mouse (fingerprint scanner) device
+		133 = /dev/usb/sisusbvga1	First SiSUSB VGA device
+		    ...
+		140 = /dev/usb/sisusbvga8	Eigth SISUSB VGA device
+		144 = /dev/usb/lcd	USB LCD device
+		160 = /dev/usb/legousbtower0	1st USB Legotower device
+		    ...
+		175 = /dev/usb/legousbtower15	16th USB Legotower device
+		240 = /dev/usb/dabusb0	First daubusb device
+		    ...
+		243 = /dev/usb/dabusb3	Fourth dabusb device
 
 180 block	USB block devices
 		0 = /dev/uba		First USB block device
@@ -2710,6 +2723,17 @@ Your cooperation is appreciated.
 		  1 = /dev/cpu/1/msr		MSRs on CPU 1
 		    ...
 
+202 block	Xen Virtual Block Device
+		  0 = /dev/xvda       First Xen VBD whole disk
+		  16 = /dev/xvdb      Second Xen VBD whole disk
+		  32 = /dev/xvdc      Third Xen VBD whole disk
+		    ...
+		  240 = /dev/xvdp     Sixteenth Xen VBD whole disk
+
+                Partitions are handled in the same way as for IDE
+                disks (see major number 3) except that the limit on
+                partitions is 15.
+
 203 char	CPU CPUID information
 		  0 = /dev/cpu/0/cpuid		CPUID on CPU 0
 		  1 = /dev/cpu/1/cpuid		CPUID on CPU 1
@@ -2747,11 +2771,26 @@ Your cooperation is appreciated.
 		 46 = /dev/ttyCPM0		PPC CPM (SCC or SMC) - port 0
 		    ...
 		 47 = /dev/ttyCPM5		PPC CPM (SCC or SMC) - port 5
-		 50 = /dev/ttyIOC40		Altix serial card
+		 50 = /dev/ttyIOC0		Altix serial card
+		    ...
+		 81 = /dev/ttyIOC31		Altix serial card
+		 82 = /dev/ttyVR0		NEC VR4100 series SIU
+		 83 = /dev/ttyVR1		NEC VR4100 series DSIU
+		 84 = /dev/ttyIOC84		Altix ioc4 serial card
+		    ...
+		 115 = /dev/ttyIOC115		Altix ioc4 serial card
+		 116 = /dev/ttySIOC0		Altix ioc3 serial card
+		    ...
+		 147 = /dev/ttySIOC31		Altix ioc3 serial card
+		 148 = /dev/ttyPSC0		PPC PSC - port 0
+		    ...
+		 153 = /dev/ttyPSC5		PPC PSC - port 5
+		 154 = /dev/ttyAT0		ATMEL serial port 0
 		    ...
-		 81 = /dev/ttyIOC431		Altix serial card
-		 82 = /dev/ttyVR0               NEC VR4100 series SIU
-		 83 = /dev/ttyVR1               NEC VR4100 series DSIU
+		 169 = /dev/ttyAT15		ATMEL serial port 15
+		 170 = /dev/ttyNX0		Hilscher netX serial port 0
+		    ...
+		 185 = /dev/ttyNX15		Hilscher netX serial port 15
 
 205 char	Low-density serial ports (alternate device)
 		  0 = /dev/culu0		Callout device for ttyLU0
@@ -2786,8 +2825,8 @@ Your cooperation is appreciated.
 		 50 = /dev/cuioc40		Callout device for ttyIOC40
 		    ...
 		 81 = /dev/cuioc431		Callout device for ttyIOC431
-		 82 = /dev/cuvr0                Callout device for ttyVR0
-		 83 = /dev/cuvr1                Callout device for ttyVR1
+		 82 = /dev/cuvr0		Callout device for ttyVR0
+		 83 = /dev/cuvr1		Callout device for ttyVR1
 
 
 206 char	OnStream SC-x0 tape devices
@@ -2897,7 +2936,6 @@ Your cooperation is appreciated.
 		    ...
 		196 = /dev/dvb/adapter3/video0    first video decoder of fourth card
 
-
 216 char	Bluetooth RFCOMM TTY devices
 		  0 = /dev/rfcomm0		First Bluetooth RFCOMM TTY device
 		  1 = /dev/rfcomm1		Second Bluetooth RFCOMM TTY device
@@ -3002,12 +3040,43 @@ Your cooperation is appreciated.
 		ioctl()'s can be used to rewind the tape regardless of
 		the device used to access it.
 
-231 char	InfiniBand MAD
+231 char	InfiniBand
 		0 = /dev/infiniband/umad0
 		1 = /dev/infiniband/umad1
-		 ...
+		  ...
+		63 = /dev/infiniband/umad63    63rd InfiniBandMad device
+		64 = /dev/infiniband/issm0     First InfiniBand IsSM device
+		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
+		  ...
+		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
+		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		  ...
+		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+
+232 char	Biometric Devices
+		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
+		1 = /dev/biometric/sensor0/iris		first iris sensor on first device
+		2 = /dev/biometric/sensor0/retina	first retina sensor on first device
+		3 = /dev/biometric/sensor0/voiceprint	first voiceprint sensor on first device
+		4 = /dev/biometric/sensor0/facial	first facial sensor on first device
+		5 = /dev/biometric/sensor0/hand		first hand sensor on first device
+		  ...
+		10 = /dev/biometric/sensor1/fingerprint	first fingerprint sensor on second device
+		  ...
+		20 = /dev/biometric/sensor2/fingerprint	first fingerprint sensor on third device
+		  ...
 
-232-239		UNASSIGNED
+233 char	PathScale InfiniPath interconnect
+		0 = /dev/ipath        Primary device for programs (any unit)
+		1 = /dev/ipath0       Access specifically to unit 0
+		2 = /dev/ipath1       Access specifically to unit 1
+		  ...
+		4 = /dev/ipath3       Access specifically to unit 3
+		129 = /dev/ipath_sma    Device used by Subnet Management Agent
+		130 = /dev/ipath_diag   Device used by diagnostics programs
+
+234-239		UNASSIGNED
 
 240-254 char	LOCAL/EXPERIMENTAL USE
 240-254 block	LOCAL/EXPERIMENTAL USE
@@ -3021,6 +3090,24 @@ Your cooperation is appreciated.
 		This major is reserved to assist the expansion to a
 		larger number space.  No device nodes with this major
 		should ever be created on the filesystem.
+		(This is probaly not true anymore, but I'll leave it
+		for now /Torben)
+
+---LARGE MAJORS!!!!!---
+
+256 char	Equinox SST multi-port serial boards
+		   0 = /dev/ttyEQ0	First serial port on first Equinox SST board
+		 127 = /dev/ttyEQ127	Last serial port on first Equinox SST board
+		 128 = /dev/ttyEQ128	First serial port on second Equinox SST board
+		  ...
+		1027 = /dev/ttyEQ1027	Last serial port on eighth Equinox SST board
+
+256 block	Resident Flash Disk Flash Translation Layer
+		  0 = /dev/rfda		First RFD FTL layer
+		 16 = /dev/rfdb		Second RFD FTL layer
+		  ...
+		240 = /dev/rfdp		16th RFD FTL layer
+
 
  ****	ADDITIONAL /dev DIRECTORY ENTRIES