drivers/net/: Use the DMA_{64,32}BIT_MASK constants

Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask()

This patch includes dma-mapping.h explicitly because it caused errors
on some architectures otherwise.

See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Domen Puncer <domen@coderock.org>

11 files changed, 27 insertions, 16 deletions

diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 6eea3a8accb..dbecc6bf785 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -58,6 +58,7 @@
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
@@ -1167,9 +1168,9 @@ static int __devinit ace_init(struct net_device *dev)
 	/*
 	 * Configure DMA attributes.
 	 */
-	if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		ap->pci_using_dac = 1;
-	} else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) {
+	} else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		ap->pci_using_dac = 0;
 	} else {
 		ecode = -ENODEV;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 4a47df5a9ff..cfaa6b2bf34 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -143,6 +143,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
@@ -2286,7 +2287,7 @@ static int __devinit e100_probe(struct pci_dev *pdev,
 		goto err_out_disable_pdev;
 	}
 
-	if((err = pci_set_dma_mask(pdev, 0xFFFFFFFFULL))) {
+	if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
 		DPRINTK(PROBE, ERR, "No usable DMA configuration, aborting.\n");
 		goto err_out_free_res;
 	}
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index c9d1a86d959..cf0ac6fda1a 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -106,6 +106,7 @@
 #include <linux/interrupt.h>
 #include <linux/eisa.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
@@ -557,7 +558,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
 			 * Also, we can have EISA Busmaster cards (not tested),
 			 * so beware !!! - Jean II */
 			if((bus == HP100_BUS_PCI) &&
-			   (pci_set_dma_mask(pci_dev, 0xffffffff))) {
+			   (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK))) {
 				/* Gracefully fallback to shared memory */
 				goto busmasterfail;
 			}
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index c336b46bd33..cc796527177 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -101,6 +101,7 @@
 #include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 9c224eba057..bb639a8794d 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -42,6 +42,7 @@
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
@@ -4593,19 +4594,19 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		return ret;
 	}
 
-	if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
 		dma_flag = TRUE;
 
 		if (pci_set_consistent_dma_mask
-		    (pdev, 0xffffffffffffffffULL)) {
+		    (pdev, DMA_64BIT_MASK)) {
 			DBG_PRINT(ERR_DBG,
 				  "Unable to obtain 64bit DMA for \
 					consistent allocations\n");
 			pci_disable_device(pdev);
 			return -ENOMEM;
 		}
-	} else if (!pci_set_dma_mask(pdev, 0xffffffffUL)) {
+	} else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 32bit DMA\n");
 	} else {
 		pci_disable_device(pdev);
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 1ccb2989001..82570ec44d8 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -112,6 +112,7 @@
 #include	<linux/moduleparam.h>
 #include	<linux/init.h>
 #include 	<linux/proc_fs.h>
+#include	<linux/dma-mapping.h>
 
 #include	"h/skdrv1st.h"
 #include	"h/skdrv2nd.h"
@@ -4912,8 +4913,8 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
 		goto out;
  
 	/* Configure DMA attributes. */
-	if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL) &&
-	    pci_set_dma_mask(pdev, (u64) 0xffffffff))
+	if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+	    pci_set_dma_mask(pdev, DMA_32BIT_MASK))
 		goto out_disable_device;
 
 
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 5cd50fd53c1..1f5655655c4 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -44,6 +44,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
@@ -2989,10 +2990,10 @@ static int __devinit gem_init_one(struct pci_dev *pdev,
 	 */
 	if (pdev->vendor == PCI_VENDOR_ID_SUN &&
 	    pdev->device == PCI_DEVICE_ID_SUN_GEM &&
-	    !pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL)) {
+	    !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		pci_using_dac = 1;
 	} else {
-		err = pci_set_dma_mask(pdev, (u64) 0xffffffff);
+		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (err) {
 			printk(KERN_ERR PFX "No usable DMA configuration, "
 			       "aborting.\n");
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index cf31c062985..942fae0f213 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -171,6 +171,7 @@
 #include <linux/ioport.h>
 #include <linux/eisa.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
@@ -566,7 +567,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 
 		priv->adapter = &board_info[ent->driver_data];
 
-		rc = pci_set_dma_mask(pdev, 0xFFFFFFFF);
+		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
 			printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
 			goto err_out_free_dev;
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 99e0b03b69a..6e5ade99a38 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -118,6 +118,7 @@
 #include <linux/stddef.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/version.h>
 #include <linux/bitops.h>
@@ -257,7 +258,7 @@ static int __devinit streamer_init_one(struct pci_dev *pdev,
 #endif
 #endif
 
-	rc = pci_set_dma_mask(pdev, 0xFFFFFFFFULL);
+	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 	if (rc) {
 		printk(KERN_ERR "%s: No suitable PCI mapping available.\n",
 				dev->name);
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 7b57d552094..6200cfc4244 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -186,6 +186,7 @@ static const int multicast_filter_limit = 32;
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
@@ -740,7 +741,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 		goto err_out;
 
 	/* this should always be supported */
-	rc = pci_set_dma_mask(pdev, 0xffffffff);
+	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 	if (rc) {
 		printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
 		       "the card!?\n");
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index 1e7b47704ad..9c1e10602f2 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -26,6 +26,7 @@
 #include <linux/netdevice.h>
 #include <linux/hdlc.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/delay.h>
 
@@ -624,8 +625,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
 	/* FIXME when PCI/DMA subsystems are fixed.
 	   We set both dma_mask and consistent_dma_mask back to 32 bits
 	   to indicate the card can do 32-bit DMA addressing */
-	if (pci_set_consistent_dma_mask(pdev, 0xFFFFFFFF) ||
-	    pci_set_dma_mask(pdev, 0xFFFFFFFF)) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) ||
+	    pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_ERR "wanXL: No usable DMA configuration\n");
 		wanxl_pci_remove_one(pdev);
 		return -EIO;