diff options
author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-26 22:25:22 +0200 |
---|---|---|
committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-04-26 22:25:22 +0200 |
commit | f629b38beddf2ff8bc3fda1754bbd6cc7d3acc03 (patch) | |
tree | 0e5c4b222c2df6aa4fab5dd1bf5bc2e936a47979 | |
parent | 63158d5c217e2e62665ae9b10d203bd7da817108 (diff) | |
download | linux-3.10-f629b38beddf2ff8bc3fda1754bbd6cc7d3acc03.tar.gz linux-3.10-f629b38beddf2ff8bc3fda1754bbd6cc7d3acc03.tar.bz2 linux-3.10-f629b38beddf2ff8bc3fda1754bbd6cc7d3acc03.zip |
au1xxx-ide: fix MWDMA support
Always use "fast" MWDMA support and remove dma_{black,white}_list
(they were based on completely bogus ->ide_dma_check implementation
which didn't set neither the host controller timings nor the device
for the desired transfer mode).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-rw-r--r-- | Documentation/mips/AU1xxx_IDE.README | 46 | ||||
-rw-r--r-- | drivers/ide/mips/au1xxx-ide.c | 49 | ||||
-rw-r--r-- | include/asm-mips/mach-au1x00/au1xxx_ide.h | 42 |
3 files changed, 2 insertions, 135 deletions
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index 5c8334123f4..25a6ed1aaa5 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -46,8 +46,6 @@ Two files are introduced: a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' containes : struct _auide_hwif - struct drive_list_entry dma_white_list - struct drive_list_entry dma_black_list timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2 @@ -63,12 +61,6 @@ Four configs variables are introduced: CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size per descriptor -If MWDMA is enabled and the connected hard disc is not on the white list, the -kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE -performance is substantial slower then in full speed mwdma. In this case -please add your hard disc to the white list (follow instruction from 'ADD NEW -HARD DISC TO WHITE OR BLACK LIST' section). - SUPPORTED IDE MODES ------------------- @@ -120,44 +112,6 @@ CONFIG_IDEDMA_AUTO=y Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to disable the burst support on DBDMA controller. -ADD NEW HARD DISC TO WHITE OR BLACK LIST ----------------------------------------- - -Step 1 : detect the model name of your hard disc - - a) connect your hard disc to the AU1XXX - - b) boot your kernel and get the hard disc model. - - Example boot log: - - --snipped-- - Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 - ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx - Au1xxx IDE(builtin) configured for MWDMA2 - Probing IDE interface ide0... - hda: Maxtor 6E040L0, ATA DISK drive - ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64 - hda: max request size: 64KiB - hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA - --snipped-- - - In this example 'Maxtor 6E040L0'. - -Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h' - - Add your hard disc to the dma_white_list or dma_black_list structur. - -Step 3 : Recompile the kernel - - Enable MWDMA support in the kernel configuration. Recompile the kernel and - reboot. - -Step 4 : Tests - - If you have add a hard disc to the white list, please run some stress tests - for verification. - ACKNOWLEDGMENTS --------------- diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 7179d495321..d2e926efd3c 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -47,7 +47,6 @@ #define IDE_AU1XXX_BURSTMODE 1 static _auide_hwif auide_hwif; -static int dbdma_init_done; static int auide_ddma_init(_auide_hwif *auide); @@ -315,35 +314,6 @@ static int auide_dma_setup(ide_drive_t *drive) return 0; } -static u8 auide_mdma_filter(ide_drive_t *drive) -{ - /* - * FIXME: ->white_list and ->black_list are based on completely bogus - * ->ide_dma_check implementation which didn't set neither the host - * controller timings nor the device for the desired transfer mode. - * - * They should be either removed or 0x00 MWDMA mask should be - * returned for devices on the ->black_list. - */ - - if (dbdma_init_done == 0) { - auide_hwif.white_list = ide_in_drive_list(drive->id, - dma_white_list); - auide_hwif.black_list = ide_in_drive_list(drive->id, - dma_black_list); - auide_hwif.drive = drive; - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; - } - - /* Is the drive in our DMA black list? */ - if (auide_hwif.black_list) - printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n", - drive->name, drive->id->model); - - return drive->hwif->mwdma_mask; -} - static int auide_dma_test_irq(ide_drive_t *drive) { if (drive->waiting_for_dma == 0) @@ -420,17 +390,8 @@ static int auide_ddma_init(_auide_hwif *auide) { dev_id = AU1XXX_ATA_DDMA_REQ; - if (auide->white_list || auide->black_list) { - tsize = 8; - devwidth = 32; - } - else { - tsize = 1; - devwidth = 16; - - printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model); - printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'"); - } + tsize = 8; /* 1 */ + devwidth = 32; /* 16 */ #ifdef IDE_AU1XXX_BURSTMODE flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; @@ -546,9 +507,6 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) static const struct ide_port_ops au1xxx_port_ops = { .set_pio_mode = au1xxx_set_pio_mode, .set_dma_mode = auide_set_dma_mode, -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - .mdma_filter = auide_mdma_filter, -#endif }; static const struct ide_port_info au1xxx_port_info = { @@ -648,10 +606,7 @@ static int au_ide_probe(struct device *dev) auide_hwif.hwif = hwif; hwif->hwif_data = &auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; -#endif idx[0] = hwif->index; diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index 89655c0cdcd..b493a5e46c6 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -70,7 +70,6 @@ typedef struct ide_hwif_t *hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA ide_drive_t *drive; - u8 white_list, black_list; struct dbdma_cmd *dma_table_cpu; dma_addr_t dma_table_dma; #endif @@ -81,47 +80,6 @@ typedef struct #endif } _auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -/* HD white list */ -static const struct drive_list_entry dma_white_list [] = { -/* - * Hitachi - */ - { "HITACHI_DK14FA-20" , NULL }, - { "HTS726060M9AT00" , NULL }, -/* - * Maxtor - */ - { "Maxtor 6E040L0" , NULL }, - { "Maxtor 6Y080P0" , NULL }, - { "Maxtor 6Y160P0" , NULL }, -/* - * Seagate - */ - { "ST3120026A" , NULL }, - { "ST320014A" , NULL }, - { "ST94011A" , NULL }, - { "ST340016A" , NULL }, -/* - * Western Digital - */ - { "WDC WD400UE-00HCT0" , NULL }, - { "WDC WD400JB-00JJC0" , NULL }, - { NULL , NULL } -}; - -/* HD black list */ -static const struct drive_list_entry dma_black_list [] = { -/* - * Western Digital - */ - { "WDC WD100EB-00CGH0" , NULL }, - { "WDC WD200BB-00AUA1" , NULL }, - { "WDC AC24300L" , NULL }, - { NULL , NULL } -}; -#endif - /******************************************************************************* * PIO Mode timing calculation : * * * |