summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPaul Bolle <pebolle@tiscali.nl>2011-08-15 02:02:26 +0200
committerJiri Kosina <jkosina@suse.cz>2011-09-27 18:08:04 +0200
commit395cf9691d72173d8cdaa613c5f0255f993af94b (patch)
tree813be524794fe1c0850805d7faca90e45fd0e60b
parente060c38434b2caa78efe7cedaff4191040b65a15 (diff)
downloadlinux-3.10-395cf9691d72173d8cdaa613c5f0255f993af94b.tar.gz
linux-3.10-395cf9691d72173d8cdaa613c5f0255f993af94b.tar.bz2
linux-3.10-395cf9691d72173d8cdaa613c5f0255f993af94b.zip
doc: fix broken references
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-rw-r--r--Documentation/PCI/pci.txt2
-rw-r--r--Documentation/blackfin/bfin-gpio-notes.txt2
-rw-r--r--Documentation/block/biodoc.txt2
-rw-r--r--Documentation/bus-virt-phys-mapping.txt2
-rw-r--r--Documentation/cdrom/packet-writing.txt2
-rw-r--r--Documentation/development-process/4.Coding2
-rw-r--r--Documentation/devicetree/bindings/gpio/led.txt2
-rw-r--r--Documentation/filesystems/caching/object.txt6
-rw-r--r--Documentation/filesystems/locks.txt11
-rw-r--r--Documentation/filesystems/nfs/idmapper.txt2
-rw-r--r--Documentation/filesystems/pohmelfs/design_notes.txt5
-rw-r--r--Documentation/filesystems/proc.txt2
-rw-r--r--Documentation/filesystems/vfs.txt3
-rw-r--r--Documentation/frv/booting.txt6
-rw-r--r--Documentation/input/input.txt2
-rw-r--r--Documentation/kernel-docs.txt4
-rw-r--r--Documentation/kernel-parameters.txt12
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt4
-rw-r--r--Documentation/media-framework.txt4
-rw-r--r--Documentation/memory-barriers.txt2
-rw-r--r--Documentation/networking/scaling.txt2
-rw-r--r--Documentation/power/basic-pm-debugging.txt2
-rw-r--r--Documentation/power/userland-swsusp.txt3
-rw-r--r--Documentation/rfkill.txt3
-rw-r--r--Documentation/scsi/aic7xxx_old.txt2
-rw-r--r--Documentation/scsi/scsi_mid_low_api.txt5
-rw-r--r--Documentation/security/keys-trusted-encrypted.txt3
-rw-r--r--Documentation/sound/oss/PAS163
-rw-r--r--Documentation/spi/pxa2xx4
-rw-r--r--Documentation/timers/highres.txt2
-rw-r--r--Documentation/usb/dma.txt6
-rw-r--r--Documentation/virtual/lguest/lguest.c2
-rw-r--r--Documentation/vm/numa4
-rw-r--r--Documentation/vm/slub.txt2
-rw-r--r--arch/alpha/kernel/srm_env.c5
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/include/asm/io.h2
-rw-r--r--arch/arm/mach-pxa/xcep.c3
-rw-r--r--arch/ia64/hp/common/sba_iommu.c12
-rw-r--r--arch/m68k/q40/README2
-rw-r--r--arch/microblaze/include/asm/dma-mapping.h2
-rw-r--r--arch/mips/include/asm/lasat/lasat.h6
-rw-r--r--arch/mn10300/Kconfig2
-rw-r--r--arch/mn10300/kernel/irq.c1
-rw-r--r--arch/openrisc/Kconfig2
-rw-r--r--arch/openrisc/include/asm/dma-mapping.h2
-rw-r--r--arch/parisc/include/asm/dma-mapping.h2
-rw-r--r--arch/parisc/kernel/pci-dma.c2
-rw-r--r--arch/powerpc/include/asm/qe.h2
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c2
-rw-r--r--arch/unicore32/include/asm/io.h2
-rw-r--r--arch/x86/Kconfig2
-rw-r--r--arch/x86/Kconfig.debug2
-rw-r--r--arch/x86/boot/header.S2
-rw-r--r--arch/x86/include/asm/dma-mapping.h2
-rw-r--r--arch/x86/kernel/amd_gart_64.c2
-rw-r--r--arch/x86/kernel/apm_32.c2
-rw-r--r--arch/x86/kernel/pci-dma.c4
-rw-r--r--drivers/char/apm-emulation.c5
-rw-r--r--drivers/input/misc/rotary_encoder.c2
-rw-r--r--drivers/leds/Kconfig2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005-remote.c2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005.c2
-rw-r--r--drivers/media/dvb/frontends/dib3000.h2
-rw-r--r--drivers/media/dvb/frontends/dib3000mb.c2
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/can/sja1000/sja1000_of_platform.c2
-rw-r--r--drivers/net/tulip/21142.c3
-rw-r--r--drivers/net/tulip/eeprom.c2
-rw-r--r--drivers/net/tulip/interrupt.c3
-rw-r--r--drivers/net/tulip/media.c3
-rw-r--r--drivers/net/tulip/pnic.c3
-rw-r--r--drivers/net/tulip/pnic2.c3
-rw-r--r--drivers/net/tulip/timer.c3
-rw-r--r--drivers/net/tulip/tulip.h3
-rw-r--r--drivers/net/tulip/tulip_core.c3
-rw-r--r--drivers/parisc/sba_iommu.c16
-rw-r--r--drivers/platform/x86/Kconfig5
-rw-r--r--drivers/scsi/megaraid/megaraid_mbox.c2
-rw-r--r--drivers/staging/cxt1e1/Kconfig3
-rw-r--r--drivers/usb/serial/digi_acceleport.c2
-rw-r--r--drivers/video/igafb.c2
-rw-r--r--drivers/watchdog/smsc37b787_wdt.c2
-rw-r--r--fs/configfs/inode.c3
-rw-r--r--fs/configfs/item.c2
-rw-r--r--fs/locks.c2
-rw-r--r--fs/squashfs/Kconfig6
-rw-r--r--include/linux/io-mapping.h2
-rw-r--r--include/linux/isdn.h2
-rw-r--r--include/linux/platform_data/ntc_thermistor.h2
-rw-r--r--include/media/videobuf-dma-sg.h2
-rw-r--r--include/target/configfs_macros.h4
-rw-r--r--net/netfilter/Kconfig2
-rw-r--r--sound/oss/Kconfig4
-rw-r--r--tools/perf/util/config.c4
96 files changed, 125 insertions, 179 deletions
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 6148d4080f8..aa09e5476bb 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure
as the PCI "bus address" might have been remapped to a "host physical"
address by the arch/chip-set specific kernel support.
-See Documentation/IO-mapping.txt for how to access device registers
+See Documentation/io-mapping.txt for how to access device registers
or device memory.
The device driver needs to call pci_request_region() to verify
diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt
index f731c1e5647..d36b01f778b 100644
--- a/Documentation/blackfin/bfin-gpio-notes.txt
+++ b/Documentation/blackfin/bfin-gpio-notes.txt
@@ -1,5 +1,5 @@
/*
- * File: Documentation/blackfin/bfin-gpio-note.txt
+ * File: Documentation/blackfin/bfin-gpio-notes.txt
* Based on:
* Author:
*
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index c6d84cfd2f5..e418dc0a708 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
do not have a corresponding kernel virtual address space mapping) and
low-memory pages.
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
on PCI high mem DMA aspects and mapping of scatter gather lists, and support
for 64 bit PCI.
diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 1b5aa10df84..2bc55ff3b4d 100644
--- a/Documentation/bus-virt-phys-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
@@ -1,6 +1,6 @@
[ NOTE: The virt_to_bus() and bus_to_virt() functions have been
superseded by the functionality provided by the PCI DMA interface
- (see Documentation/PCI/PCI-DMA-mapping.txt). They continue
+ (see Documentation/DMA-API-HOWTO.txt). They continue
to be documented below for historical purposes, but new code
must not use them. --davidm 00/12/12 ]
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index 13c251d5add..2834170d821 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
For a description of the sysfs interface look into the file:
- Documentation/ABI/testing/sysfs-block-pktcdvd
+ Documentation/ABI/testing/sysfs-class-pktcdvd
Using the pktcdvd debugfs interface
diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding
index 83f5f5b365a..e3cb6a56653 100644
--- a/Documentation/development-process/4.Coding
+++ b/Documentation/development-process/4.Coding
@@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to
fail; these failures can be restricted to a specific range of code.
Running with fault injection enabled allows the programmer to see how the
code responds when things go badly. See
-Documentation/fault-injection/fault-injection.text for more information on
+Documentation/fault-injection/fault-injection.txt for more information on
how to use this facility.
Other kinds of errors can be found with the "sparse" static analysis tool.
diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt
index 064db928c3c..141087cf310 100644
--- a/Documentation/devicetree/bindings/gpio/led.txt
+++ b/Documentation/devicetree/bindings/gpio/led.txt
@@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED.
LED sub-node properties:
- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
- for devices" in Documentation/powerpc/booting-without-of.txt. Active
+ for devices" in Documentation/devicetree/booting-without-of.txt. Active
low LEDs should be indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt
index e8b0a35d8fe..58313348da8 100644
--- a/Documentation/filesystems/caching/object.txt
+++ b/Documentation/filesystems/caching/object.txt
@@ -127,9 +127,9 @@ fscache_enqueue_object()).
PROVISION OF CPU TIME
---------------------
-The work to be done by the various states is given CPU time by the threads of
-the slow work facility (see Documentation/slow-work.txt). This is used in
-preference to the workqueue facility because:
+The work to be done by the various states was given CPU time by the threads of
+the slow work facility. This was used in preference to the workqueue facility
+because:
(1) Threads may be completely occupied for very long periods of time by a
particular work item. These state actions may be doing sequences of
diff --git a/Documentation/filesystems/locks.txt b/Documentation/filesystems/locks.txt
index fab857accbd..2cf81082581 100644
--- a/Documentation/filesystems/locks.txt
+++ b/Documentation/filesystems/locks.txt
@@ -53,11 +53,12 @@ fcntl(), with all the problems that implies.
1.3 Mandatory Locking As A Mount Option
---------------------------------------
-Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt'
-was prior to this release a general configuration option that was valid for
-all mounted filesystems. This had a number of inherent dangers, not the
-least of which was the ability to freeze an NFS server by asking it to read
-a file for which a mandatory lock existed.
+Mandatory locking, as described in
+'Documentation/filesystems/mandatory-locking.txt' was prior to this release a
+general configuration option that was valid for all mounted filesystems. This
+had a number of inherent dangers, not the least of which was the ability to
+freeze an NFS server by asking it to read a file for which a mandatory lock
+existed.
From this release of the kernel, mandatory locking can be turned on and off
on a per-filesystem basis, using the mount options 'mand' and 'nomand'.
diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt
index 9c8fd614865..120fd3cf7fd 100644
--- a/Documentation/filesystems/nfs/idmapper.txt
+++ b/Documentation/filesystems/nfs/idmapper.txt
@@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program. In
this case, /some/other/program will handle all uid lookups and
/usr/sbin/nfs.idmap will handle gid, user, and group lookups.
-See <file:Documentation/security/keys-request-keys.txt> for more information
+See <file:Documentation/security/keys-request-key.txt> for more information
about the request-key function.
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index dcf83358716..8aef9133570 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -58,8 +58,9 @@ data transfers.
POHMELFS clients operate with a working set of servers and are capable of balancing read-only
operations (like lookups or directory listings) between them according to IO priorities.
Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
-with write permission turned on. IO priority and permissions can be changed in run-time.
+in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which
+are connected with write permission turned on. IO priority and permissions can be changed in
+run-time.
POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
One can select any kernel supported cipher, encryption mode, hash type and operation mode
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index db3b1aba32a..0ec91f03422 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation.
This chapter is heavily based on the documentation included in the pre 2.2
kernels, and became part of it in version 2.2.1 of the Linux kernel.
-Please see: Documentation/sysctls/ directory for descriptions of these
+Please see: Documentation/sysctl/ directory for descriptions of these
entries.
------------------------------------------------------------------------------
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 52d8fb81cff..43cbd082172 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -1053,9 +1053,6 @@ manipulate dentries:
and the dentry is returned. The caller must use dput()
to free the dentry when it finishes using it.
-For further information on dentry locking, please refer to the document
-Documentation/filesystems/dentry-locking.txt.
-
Mount Options
=============
diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt
index 37c4d84a0e5..9bdf4b46e74 100644
--- a/Documentation/frv/booting.txt
+++ b/Documentation/frv/booting.txt
@@ -180,9 +180,3 @@ separated by spaces:
This tells the kernel what program to run initially. By default this is
/sbin/init, but /sbin/sash or /bin/sh are common alternatives.
-
- (*) vdc=...
-
- This option configures the MB93493 companion chip visual display
- driver. Please see Documentation/frv/mb93493/vdc.txt for more
- information.
diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt
index b93c08442e3..b3d6787b4fb 100644
--- a/Documentation/input/input.txt
+++ b/Documentation/input/input.txt
@@ -111,7 +111,7 @@ LCDs and many other purposes.
The monitor and speaker controls should be easy to add to the hid/input
interface, but for the UPSs and LCDs it doesn't make much sense. For this,
-the hiddev interface was designed. See Documentation/usb/hiddev.txt
+the hiddev interface was designed. See Documentation/hid/hiddev.txt
for more information about it.
The usage of the usbhid module is very simple, it takes no parameters,
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 0e0734b509d..eda1eb1451a 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -300,7 +300,7 @@
* Title: "The Kernel Hacking HOWTO"
Author: Various Talented People, and Rusty.
- Location: in kernel tree, Documentation/DocBook/kernel-hacking/
+ Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
symbols, return conventions.
@@ -351,7 +351,7 @@
* Title: "Linux Kernel Locking HOWTO"
Author: Various Talented People, and Rusty.
- Location: in kernel tree, Documentation/DocBook/kernel-locking/
+ Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl
(must be built as "make {htmldocs | psdocs | pdfdocs})
Keywords: locks, locking, spinlock, semaphore, atomic, race
condition, bottom halves, tasklets, softirqs.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 854ed5ca7e3..be9370c764c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -163,7 +163,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rsdt -- prefer RSDT over (default) XSDT
copy_dsdt -- copy DSDT to memory
- See also Documentation/power/pm.txt, pci=noacpi
+ See also Documentation/power/runtime_pm.txt, pci=noacpi
acpi_rsdp= [ACPI,EFI,KEXEC]
Pass the RSDP address to the kernel, mostly used
@@ -319,7 +319,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
Format: <a>,<b>
- See also Documentation/kernel/input/joystick.txt
+ See also Documentation/input/joystick.txt
analog.map= [HW,JOY] Analog joystick and gamepad support
Specifies type or capabilities of an analog joystick
@@ -408,7 +408,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
bttv.radio= Most important insmod options are available as
kernel args too.
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
- bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
+ bttv.tuner=
bulk_remove=off [PPC] This parameter disables the use of the pSeries
firmware feature for flushing multiple hpte entries
@@ -724,7 +724,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
elevator= [IOSCHED]
Format: {"cfq" | "deadline" | "noop"}
- See Documentation/block/as-iosched.txt and
+ See Documentation/block/cfq-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
elfcorehdr= [IA-64,PPC,SH,X86]
@@ -765,7 +765,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
fail_make_request=[KNL]
General fault injection mechanism.
Format: <interval>,<probability>,<space>,<times>
- See also /Documentation/fault-injection/.
+ See also Documentation/fault-injection/.
floppy= [HW]
See Documentation/blockdev/floppy.txt.
@@ -2375,7 +2375,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Format: <integer>
sonypi.*= [HW] Sony Programmable I/O Control Device driver
- See Documentation/sonypi.txt
+ See Documentation/laptops/sonypi.txt
specialix= [HW,SERIAL] Specialix multi-serial port adapter
See Documentation/serial/specialix.txt.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 61815483efa..3ff0dad62d3 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -736,7 +736,7 @@ status as "unknown". The available commands are:
sysfs notes:
The ThinkLight sysfs interface is documented by the LED class
-documentation, in Documentation/leds-class.txt. The ThinkLight LED name
+documentation, in Documentation/leds/leds-class.txt. The ThinkLight LED name
is "tpacpi::thinklight".
Due to limitations in the sysfs LED class, if the status of the ThinkLight
@@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink.
sysfs notes:
The ThinkPad LED sysfs interface is described in detail by the LED class
-documentation, in Documentation/leds-class.txt.
+documentation, in Documentation/leds/leds-class.txt.
The LEDs are named (in LED ID order, from 0 to 12):
"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt
index 669b5fb03a8..3a0f879533c 100644
--- a/Documentation/media-framework.txt
+++ b/Documentation/media-framework.txt
@@ -9,8 +9,8 @@ Introduction
------------
The media controller API is documented in DocBook format in
-Documentation/DocBook/v4l/media-controller.xml. This document will focus on
-the kernel-side implementation of the media framework.
+Documentation/DocBook/media/v4l/media-controller.xml. This document will focus
+on the kernel-side implementation of the media framework.
Abstract media device model
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index f0d3a8026a5..2759f7c188f 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
[*] For information on bus mastering DMA and coherency please read:
Documentation/PCI/pci.txt
- Documentation/PCI/PCI-DMA-mapping.txt
+ Documentation/DMA-API-HOWTO.txt
Documentation/DMA-API.txt
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index 58fd7414e6c..729985ed05b 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -73,7 +73,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default,
an IRQ may be handled on any CPU. Because a non-negligible part of packet
processing takes place in receive interrupt handling, it is advantageous
to spread receive interrupts between CPUs. To manually adjust the IRQ
-affinity of each interrupt see Documentation/IRQ-affinity. Some systems
+affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems
will be running irqbalance, a daemon that dynamically optimizes IRQ
assignments and as a result may override any manual settings.
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index ddd78172ef7..05a7fe76232 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -173,7 +173,7 @@ kernel messages using the serial console. This may provide you with some
information about the reasons of the suspend (resume) failure. Alternatively,
it may be possible to use a FireWire port for debugging with firescope
(ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to
-use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
+use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt .
2. Testing suspend to RAM (STR)
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index 1101bee4e82..0e870825c1b 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -77,7 +77,8 @@ SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
containing the resume device specification and the offset); for swap
partitions the offset is always 0, but it is different from zero for
- swap files (see Documentation/swsusp-and-swap-files.txt for details).
+ swap files (see Documentation/power/swsusp-and-swap-files.txt for
+ details).
SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
depending on the argument value (enable, if the argument is nonzero)
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 83668e5dd17..03c9d9299c6 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -117,5 +117,4 @@ The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
-For further details consult Documentation/ABI/stable/dev-rfkill and
-Documentation/ABI/stable/sysfs-class-rfkill.
+For further details consult Documentation/ABI/stable/sysfs-class-rfkill.
diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt
index 7bd210ab45a..ecfc474f36a 100644
--- a/Documentation/scsi/aic7xxx_old.txt
+++ b/Documentation/scsi/aic7xxx_old.txt
@@ -444,7 +444,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD
Kernel Compile options
------------------------------
The various kernel compile time options for this driver are now fairly
- well documented in the file Documentation/Configure.help. In order to
+ well documented in the file drivers/scsi/Kconfig. In order to
see this documentation, you need to use one of the advanced configuration
programs (menuconfig and xconfig). If you are using the "make menuconfig"
method of configuring your kernel, then you would simply highlight the
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 5f17d29c59b..a340b18cd4e 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -55,11 +55,6 @@ or in the same directory as the C source code. For example to find a url
about the USB mass storage driver see the
/usr/src/linux/drivers/usb/storage directory.
-The Linux kernel source Documentation/DocBook/scsidrivers.tmpl file
-refers to this file. With the appropriate DocBook tool-set, this permits
-users to generate html, ps and pdf renderings of information within this
-file (e.g. the interface functions).
-
Driver structure
================
Traditionally an LLD for the SCSI subsystem has been at least two files in
diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt
index 5f50ccabfc8..c9e4855ed3d 100644
--- a/Documentation/security/keys-trusted-encrypted.txt
+++ b/Documentation/security/keys-trusted-encrypted.txt
@@ -156,4 +156,5 @@ Load an encrypted key "evm" from saved blob:
Other uses for trusted and encrypted keys, such as for disk and file encryption
are anticipated. In particular the new format 'ecryptfs' has been defined in
in order to use encrypted keys to mount an eCryptfs filesystem. More details
-about the usage can be found in the file 'Documentation/keys-ecryptfs.txt'.
+about the usage can be found in the file
+'Documentation/security/keys-ecryptfs.txt'.
diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16
index 951b3dce51b..3dca4b75988 100644
--- a/Documentation/sound/oss/PAS16
+++ b/Documentation/sound/oss/PAS16
@@ -60,8 +60,7 @@ With PAS16 you can use two audio device files at the same time. /dev/dsp (and
The new stuff for 2.3.99 and later
============================================================================
-The following configuration options from Documentation/Configure.help
-are relevant to configuring the PAS16:
+The following configuration options are relevant to configuring the PAS16:
Sound card support
CONFIG_SOUND
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 00511e08db7..3352f97430e 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO
===================================================
This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx
synchronous serial port into a SPI master controller
-(see Documentation/spi/spi_summary). The driver has the following features
+(see Documentation/spi/spi-summary). The driver has the following features
- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
@@ -85,7 +85,7 @@ Declaring Slave Devices
-----------------------
Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c
using the "spi_board_info" structure found in "linux/spi/spi.h". See
-"Documentation/spi/spi_summary" for additional information.
+"Documentation/spi/spi-summary" for additional information.
Each slave device attached to the PXA must provide slave specific configuration
information via the structure "pxa2xx_spi_chip" found in
diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt
index 21332233cef..e8789976e77 100644
--- a/Documentation/timers/highres.txt
+++ b/Documentation/timers/highres.txt
@@ -30,7 +30,7 @@ hrtimer base infrastructure
---------------------------
The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of
-the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See
+the base implementation are covered in Documentation/timers/hrtimers.txt. See
also figure #2 (OLS slides p. 15)
The main differences to the timer wheel, which holds the armed timer_list type
diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt
index 84ef865237d..444651e70d9 100644
--- a/Documentation/usb/dma.txt
+++ b/Documentation/usb/dma.txt
@@ -7,7 +7,7 @@ API OVERVIEW
The big picture is that USB drivers can continue to ignore most DMA issues,
though they still must provide DMA-ready buffers (see
-Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through
+Documentation/DMA-API-HOWTO.txt). That's how they've worked through
the 2.4 (and earlier) kernels.
OR: they can now be DMA-aware.
@@ -57,7 +57,7 @@ and effects like cache-trashing can impose subtle penalties.
force a consistent memory access ordering by using memory barriers. It's
not using a streaming DMA mapping, so it's good for small transfers on
systems where the I/O would otherwise thrash an IOMMU mapping. (See
- Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and
+ Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and
"streaming" DMA mappings.)
Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@@ -88,7 +88,7 @@ WORKING WITH EXISTING BUFFERS
Existing buffers aren't usable for DMA without first being mapped into the
DMA address space of the device. However, most buffers passed to your
driver can safely be used with such DMA mapping. (See the first section
-of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?")
+of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?")
- When you're using scatterlists, you can map everything at once. On some
systems, this kicks in an IOMMU and turns the scatterlists into single
diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c
index d928c134dee..c095d79cae7 100644
--- a/Documentation/virtual/lguest/lguest.c
+++ b/Documentation/virtual/lguest/lguest.c
@@ -436,7 +436,7 @@ static unsigned long load_bzimage(int fd)
/*
* Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/x86/i386/boot.txt)
+ * a Linux boot header (see Documentation/x86/boot.txt)
*/
lseek(fd, 0, SEEK_SET);
read(fd, &boot, sizeof(boot));
diff --git a/Documentation/vm/numa b/Documentation/vm/numa
index a200a386429..ade01274212 100644
--- a/Documentation/vm/numa
+++ b/Documentation/vm/numa
@@ -109,11 +109,11 @@ to improve NUMA locality using various CPU affinity command line interfaces,
such as taskset(1) and numactl(1), and program interfaces such as
sched_setaffinity(2). Further, one can modify the kernel's default local
allocation behavior using Linux NUMA memory policy.
-[see Documentation/vm/numa_memory_policy.]
+[see Documentation/vm/numa_memory_policy.txt.]
System administrators can restrict the CPUs and nodes' memories that a non-
privileged user can specify in the scheduling or NUMA commands and functions
-using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt]
+using control groups and CPUsets. [see Documentation/cgroups/cpusets.txt]
On architectures that do not hide memoryless nodes, Linux will include only
zones [nodes] with memory in the zonelists. This means that for a memoryless
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 07375e73981..f464f47bc60 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists
slabs that have data in them. See "slabinfo -h" for more options when
running the command. slabinfo can be compiled with
-gcc -o slabinfo Documentation/vm/slabinfo.c
+gcc -o slabinfo tools/slub/slabinfo.c
Some of the modes of operation of slabinfo require that slub debugging
be enabled on the command line. F.e. no tracking information will be
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index f0df3fbd840..b9fc6c309d2 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -4,9 +4,8 @@
*
* (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
*
- * This driver is at all a modified version of Erik Mouw's
- * Documentation/DocBook/procfs_example.c, so: thank
- * you, Erik! He can be reached via email at
+ * This driver is a modified version of Erik Mouw's example proc
+ * interface, so: thank you, Erik! He can be reached via email at
* <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
* provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
* included a patch like this as well. Thanks for idea!
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3269576dbfa..05b53941b81 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1374,7 +1374,7 @@ config SMP
processor machines. On a single processor machine, the kernel will
run faster if you say N here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://tldp.org/HOWTO/SMP-HOWTO.html>.
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index d66605dea55..4bdb77bb5e6 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -238,7 +238,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
+ * Documentation/io-mapping.txt.
*
*/
#ifndef __arch_ioremap
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index acc600f5e72..937c42845df 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = {
/* We have to state that there are HWMON devices on the I2C bus on XCEP.
* Drivers for HWMON verify capabilities of the adapter when loading and
- * refuse to attach if the adapter doesn't support HWMON class of devices.
- * See also Documentation/i2c/porting-clients. */
+ * refuse to attach if the adapter doesn't support HWMON class of devices. */
static struct i2c_pxa_platform_data xcep_i2c_platform_data = {
.class = I2C_CLASS_HWMON
};
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 80241fe03f5..f5f4ef149aa 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -915,7 +915,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t sba_map_page(struct device *dev, struct page *page,
unsigned long poff, size_t size,
@@ -1044,7 +1044,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size)
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size,
enum dma_data_direction dir, struct dma_attrs *attrs)
@@ -1127,7 +1127,7 @@ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void *
sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
@@ -1190,7 +1190,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void sba_free_coherent (struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
@@ -1453,7 +1453,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction dir,
@@ -1549,7 +1549,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist,
* @dir: R/W or both.
* @attrs: optional dma attributes
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist,
int nents, enum dma_data_direction dir,
diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README
index b26d5f55e91..93f4c4cd3c4 100644
--- a/arch/m68k/q40/README
+++ b/arch/m68k/q40/README
@@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.):
char/joystick/* # most of this should work, not
# in default config.in
block/q40ide.c # startup for ide
- ide* # see Documentation/ide.txt
+ ide* # see Documentation/ide/ide.txt
floppy.c # normal PC driver, DMA emu in asm/floppy.h
# and arch/m68k/kernel/entry.S
# see drivers/block/README.fd
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 8fbb0ec1023..a569514cf19 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -16,7 +16,7 @@
#define _ASM_MICROBLAZE_DMA_MAPPING_H
/*
- * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*/
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
index a1ada1c27c1..e8ff70f80e1 100644
--- a/arch/mips/include/asm/lasat/lasat.h
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -41,10 +41,8 @@ enum lasat_mtdparts {
/*
* The format of the data record in the EEPROM.
- * See Documentation/LASAT/eeprom.txt for a detailed description
- * of the fields in this struct, and the LASAT Hardware Configuration
- * field specification for a detailed description of the config
- * field.
+ * See the LASAT Hardware Configuration field specification for a detailed
+ * description of the config field.
*/
#include <linux/types.h>
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 1f870340ebd..f093b3a8a4a 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -195,7 +195,7 @@ config SMP
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index 2623d19f4f4..2381df83bd0 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -260,7 +260,6 @@ void set_intr_level(int irq, u16 level)
/*
* mark an interrupt to be ACK'd after interrupt handlers have been run rather
* than before
- * - see Documentation/mn10300/features.txt
*/
void mn10300_set_lateack_irq_type(int irq)
{
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 4558bafbd1a..9460e1c266d 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -1,6 +1,6 @@
#
# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/config-language.txt.
+# see Documentation/kbuild/kconfig-language.txt.
#
config OPENRISC
diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h
index 60b47223390..b206ba4608b 100644
--- a/arch/openrisc/include/asm/dma-mapping.h
+++ b/arch/openrisc/include/asm/dma-mapping.h
@@ -18,7 +18,7 @@
#define __ASM_OPENRISC_DMA_MAPPING_H
/*
- * See Documentation/PCI/PCI-DMA-mapping.txt and
+ * See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*
* This file is written with the intention of eventually moving over
diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h
index 890531e32fe..467bbd510ea 100644
--- a/arch/parisc/include/asm/dma-mapping.h
+++ b/arch/parisc/include/asm/dma-mapping.h
@@ -5,7 +5,7 @@
#include <asm/cacheflush.h>
#include <asm/scatterlist.h>
-/* See Documentation/PCI/PCI-DMA-mapping.txt */
+/* See Documentation/DMA-API-HOWTO.txt */
struct hppa_dma_ops {
int (*dma_supported)(struct device *dev, u64 mask);
void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index a029f74a3c5..d047edea250 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -2,7 +2,7 @@
** PARISC 1.1 Dynamic DMA mapping support.
** This implementation is for PA-RISC platforms that do not support
** I/O TLBs (aka DMA address translation hardware).
-** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions.
+** See Documentation/DMA-API-HOWTO.txt for interface definitions.
**
** (c) Copyright 1999,2000 Hewlett-Packard Company
** (c) Copyright 2000 Grant Grundler
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 0947b36e534..5e0b6d511e1 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -196,7 +196,7 @@ static inline int qe_alive_during_sleep(void)
/* Structure that defines QE firmware binary files.
*
- * See Documentation/powerpc/qe-firmware.txt for a description of these
+ * See Documentation/powerpc/qe_firmware.txt for a description of these
* fields.
*/
struct qe_firmware {
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 904c6cbaf45..3363fbc964f 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -382,7 +382,7 @@ static void qe_upload_microcode(const void *base,
/*
* Upload a microcode to the I-RAM at a specific address.
*
- * See Documentation/powerpc/qe-firmware.txt for information on QE microcode
+ * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
* uploading.
*
* Currently, only version 1 is supported, so the 'version' field must be
diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
index 4bd87f3d13d..1a5c5a5eb39 100644
--- a/arch/unicore32/include/asm/io.h
+++ b/arch/unicore32/include/asm/io.h
@@ -32,7 +32,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr);
* ioremap and friends.
*
* ioremap takes a PCI memory address, as specified in
- * Documentation/IO-mapping.txt.
+ * Documentation/io-mapping.txt.
*
*/
#define ioremap(cookie, size) __uc32_ioremap(cookie, size)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6a47bb22657..9a4a267a8a5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -279,7 +279,7 @@ config SMP
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
- See also <file:Documentation/i386/IO-APIC.txt>,
+ See also <file:Documentation/x86/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index c0f8a5c8891..bf56e179327 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -139,7 +139,7 @@ config IOMMU_DEBUG
code. When you use it make sure you have a big enough
IOMMU/AGP aperture. Most of the options enabled by this can
be set more finegrained using the iommu= command line
- options. See Documentation/x86_64/boot-options.txt for more
+ options. See Documentation/x86/x86_64/boot-options.txt for more
details.
config IOMMU_STRESS
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 93e689f4bd8..bdb4d458ec8 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -129,7 +129,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just
type_of_loader: .byte 0 # 0 means ancient bootloader, newer
# bootloaders know to change this.
- # See Documentation/i386/boot.txt for
+ # See Documentation/x86/boot.txt for
# assigned ids
# flags, unused bits must be zero (RFU) bit within loadflags
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index d4c419f883a..ed3065fd631 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -2,7 +2,7 @@
#define _ASM_X86_DMA_MAPPING_H
/*
- * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and
+ * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and
* Documentation/DMA-API.txt for documentation.
*/
diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c
index 8a439d364b9..b1e7c7f7a0a 100644
--- a/arch/x86/kernel/amd_gart_64.c
+++ b/arch/x86/kernel/amd_gart_64.c
@@ -5,7 +5,7 @@
* This allows to use PCI devices that only support 32bit addresses on systems
* with more than 4GB.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification.
+ * See Documentation/DMA-API-HOWTO.txt for the interface specification.
*
* Copyright 2002 Andi Kleen, SuSE Labs.
* Subject to the GNU General Public License v2 only.
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 0371c484bb8..a46bd383953 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -249,8 +249,6 @@ extern int (*console_blank_hook)(int);
#define APM_MINOR_DEV 134
/*
- * See Documentation/Config.help for the configuration options.
- *
* Various options can be changed at boot time as follows:
* (We allow underscores for compatibility with the modules code)
* apm=on/off enable/disable APM
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index b49d00da2ae..622872054fb 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -117,8 +117,8 @@ again:
}
/*
- * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
- * documentation.
+ * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel
+ * parameter documentation.
*/
static __init int iommu_setup(char *p)
{
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index a7346ab97a3..ae6a9330632 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -40,10 +40,7 @@
#define APM_MINOR_DEV 134
/*
- * See Documentation/Config.help for the configuration options.
- *
- * Various options can be changed at boot time as follows:
- * (We allow underscores for compatibility with the modules code)
+ * One option can be changed at boot time as follows:
* apm=on/off enable/disable APM
*/
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 2c8b84dd9da..2be21694fac 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -7,7 +7,7 @@
* state machine code inspired by code from Tim Ruetz
*
* A generic driver for rotary encoders connected to GPIO lines.
- * See file:Documentation/input/rotary_encoder.txt for more information
+ * See file:Documentation/input/rotary-encoder.txt for more information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b591e726a6f..807c875f1c2 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -400,7 +400,7 @@ config LEDS_TRIGGER_TIMER
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
blinking the LED without any further software interaction.
- For more details read Documentation/leds-class.txt.
+ For more details read Documentation/leds/leds-class.txt.
If unsure, say Y.
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
index c3bc64ed405..7e3961d0db6 100644
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ b/drivers/media/dvb/dvb-usb/af9005-remote.c
@@ -21,7 +21,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * see Documentation/dvb/REDME.dvb-usb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
/* debug */
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index 51f6439dcfd..0351c0e52dd 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -19,7 +19,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * see Documentation/dvb/REDME.dvb-usb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*/
#include "af9005.h"
diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h
index ba917359fa6..404f63a6f26 100644
--- a/drivers/media/dvb/frontends/dib3000.h
+++ b/drivers/media/dvb/frontends/dib3000.h
@@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dibusb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*
*/
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index e80c5979636..437904cbf3e 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -17,7 +17,7 @@
* Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dibusb for more information
+ * see Documentation/dvb/README.dvb-usb for more information
*
*/
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 4be8373d43e..66b616ebe53 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -142,7 +142,7 @@ config MTD_OF_PARTS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
- as described in Documentation/powerpc/booting-without-of.txt.
+ as described in Documentation/devicetree/booting-without-of.txt.
config MTD_AR7_PARTS
tristate "TI AR7 partitioning support"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8d0314dbd94..8b8efe52b22 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1063,8 +1063,7 @@ config SMSC911X
Say Y here if you want support for SMSC LAN911x and LAN921x families
of ethernet controllers.
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
+ To compile this driver as a module, choose M here. The module
will be called smsc911x.
config SMSC911X_ARCH_HOOKS
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index cee6ba2b8b5..c3dd9d09be5 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -29,7 +29,7 @@
* nxp,external-clock-frequency = <16000000>;
* };
*
- * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further
+ * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
* information.
*/
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index 092c3faa882..25b8deedbef 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
Hardware Reference Manual" is currently available at :
http://developer.intel.com/design/network/manuals/278074.htm
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index fa5eee925f2..14d5b611783 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -7,8 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
Please submit bug reports to http://bugzilla.kernel.org/.
*/
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index 5350d753e0f..4fb8c8c0a42 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -7,10 +7,7 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
Please submit bugs to http://bugzilla.kernel.org/ .
-
*/
#include <linux/pci.h>
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 4bd13922875..beeb17b52ad 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c
index 52d898bdbeb..9c16e4ad02a 100644
--- a/drivers/net/tulip/pnic.c
+++ b/drivers/net/tulip/pnic.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index 93358ee4d83..04a7e477eaf 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -8,9 +8,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 2017faf2d0e..19078d28ffb 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 9db528967da..fb3887c18dc 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -7,9 +7,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 1246998a677..b905c0dc564 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -6,9 +6,6 @@
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
- Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
- for more information on this driver.
-
Please submit bugs to http://bugzilla.kernel.org/ .
*/
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 57a6d19eba4..a6f762188bc 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
* @dev: instance of PCI owned by the driver that's asking
* @mask: number of address bits this PCI device can handle
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int sba_dma_supported( struct device *dev, u64 mask)
{
@@ -680,7 +680,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
return(0);
}
- /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit
+ /* Documentation/DMA-API-HOWTO.txt tells drivers to try 64-bit
* first, then fall back to 32-bit if that fails.
* We are just "encouraging" 32-bit DMA masks here since we can
* never allow IOMMU bypass unless we add special support for ZX1.
@@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask)
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static dma_addr_t
sba_map_single(struct device *dev, void *addr, size_t size,
@@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size,
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
@@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size,
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void *sba_alloc_consistent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
@@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size,
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_free_consistent(struct device *hwdev, size_t size, void *vaddr,
@@ -927,7 +927,7 @@ int dump_run_sg = 0;
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static int
sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
@@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
* @nents: number of entries in list
* @direction: R/W or both.
*
- * See Documentation/PCI/PCI-DMA-mapping.txt
+ * See Documentation/DMA-API-HOWTO.txt
*/
static void
sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents,
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 1e88d478532..10cf2500522 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -31,9 +31,6 @@ config ACER_WMI
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
- For more information about this driver see
- <file:Documentation/laptops/acer-wmi.txt>
-
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
@@ -164,7 +161,7 @@ config HP_ACCEL
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
- Documentation/hwmon/lis3lv02d.
+ Documentation/misc-devices/lis3lv02d.
To compile this driver as a module, choose M here: the module will
be called hp_accel.
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 2e6619eff3e..8883ca36f93 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -67,7 +67,7 @@
*
* NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287
*
- * For history of changes, see Documentation/ChangeLog.megaraid
+ * For history of changes, see Documentation/scsi/ChangeLog.megaraid
*/
#include <linux/slab.h>
diff --git a/drivers/staging/cxt1e1/Kconfig b/drivers/staging/cxt1e1/Kconfig
index 73430ef6ae2..947f42a65c5 100644
--- a/drivers/staging/cxt1e1/Kconfig
+++ b/drivers/staging/cxt1e1/Kconfig
@@ -6,8 +6,7 @@ config CXT1E1
channelized stream WAN adapter card which contains a HDLC/Transparent
mode controller.
- If you want to compile this driver as a module
- say M here and read <file:Documentation/modules.txt>.
+ If you want to compile this driver as a module say M here.
The module will be called 'cxt1e1'.
If unsure, say N.
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 86fbba6336c..e92cbefc0f8 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -227,7 +227,7 @@
* - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
* recheck the condition they are sleeping on. This is defensive,
* in case a wake up is lost.
-* - Following Documentation/DocBook/kernel-locking.pdf no spin locks
+* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
* are held when calling copy_to/from_user or printk.
*/
diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c
index d885c770eb8..2d97752f79a 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/igafb.c
@@ -428,7 +428,7 @@ static int __init igafb_init(void)
*
* IGS2000 has its I/O memory mapped and we want
* to generate memory cycles on PCI, e.g. do ioremap(),
- * then readb/writeb() as in Documentation/IO-mapping.txt.
+ * then readb/writeb() as in Documentation/io-mapping.txt.
*
* IGS1682 is more traditional, it responds to PCI I/O
* cycles, so we want to access it with inb()/outb().
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index e97b0499bd0..97b8184614a 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -40,7 +40,7 @@
* mknod /dev/watchdog c 10 130
*
* For an example userspace keep-alive daemon, see:
- * Documentation/watchdog/watchdog.txt
+ * Documentation/watchdog/wdt.txt
*/
#include <linux/module.h>
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index c83f4768eea..ca418aaf635 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -23,7 +23,8 @@
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
- * Please see Documentation/filesystems/configfs.txt for more information.
+ * Please see Documentation/filesystems/configfs/configfs.txt for more
+ * information.
*/
#undef DEBUG
diff --git a/fs/configfs/item.c b/fs/configfs/item.c
index 76dc4c3e5d5..50cee7f9110 100644
--- a/fs/configfs/item.c
+++ b/fs/configfs/item.c
@@ -23,7 +23,7 @@
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
- * Please see the file Documentation/filesystems/configfs.txt for
+ * Please see the file Documentation/filesystems/configfs/configfs.txt for
* critical information about using the config_item interface.
*/
diff --git a/fs/locks.c b/fs/locks.c
index 703f545097d..96b33989147 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -60,7 +60,7 @@
*
* Initial implementation of mandatory locks. SunOS turned out to be
* a rotten model, so I implemented the "obvious" semantics.
- * See 'Documentation/mandatory.txt' for details.
+ * See 'Documentation/filesystems/mandatory-locking.txt' for details.
* Andy Walker (andy@lysaker.kvaerner.no), April 06, 1996.
*
* Don't allow mandatory locks on mmap()'ed files. Added simple functions to
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
index 1360d4f88f4..048b59d5b2f 100644
--- a/fs/squashfs/Kconfig
+++ b/fs/squashfs/Kconfig
@@ -19,9 +19,9 @@ config SQUASHFS
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called squashfs. Note that the root file system (the one
- containing the directory /) cannot be compiled as a module.
+ say M here. The module will be called squashfs. Note that the root
+ file system (the one containing the directory /) cannot be compiled
+ as a module.
If unsure, say N.
diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
index 8cdcc2a199a..c81ed2ac16b 100644
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -27,7 +27,7 @@
* The io_mapping mechanism provides an abstraction for mapping
* individual pages from an io device to the CPU in an efficient fashion.
*
- * See Documentation/io_mapping.txt
+ * See Documentation/io-mapping.txt
*/
#ifdef CONFIG_HAVE_ATOMIC_IOMAP
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 44cd663c53b..4ccf95d681b 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -68,7 +68,7 @@
#define ISDN_NET_ENCAP_SYNCPPP 4
#define ISDN_NET_ENCAP_UIHDLC 5
#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */
-#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt*/
+#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */
#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE
/* Facility which currently uses an ISDN-channel */
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
index abd28621527..88734e871e3 100644
--- a/include/linux/platform_data/ntc_thermistor.h
+++ b/include/linux/platform_data/ntc_thermistor.h
@@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data {
* read_uV()
*
* How to setup pullup_ohm, pulldown_ohm, and connect is
- * described at Documentation/hwmon/ntc
+ * described at Documentation/hwmon/ntc_thermistor
*
* pullup/down_ohm: 0 for infinite / not-connected
*/
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index 1c647e8148c..d8fb6012c10 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -34,7 +34,7 @@
* does memory allocation too using vmalloc_32().
*
* videobuf_dma_*()
- * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to
+ * see Documentation/DMA-API-HOWTO.txt, these functions to
* basically the same. The map function does also build a
* scatterlist for the buffer (and unmap frees it ...)
*
diff --git a/include/target/configfs_macros.h b/include/target/configfs_macros.h
index 7fe74608b43..a0fc85bbe2d 100644
--- a/include/target/configfs_macros.h
+++ b/include/target/configfs_macros.h
@@ -30,8 +30,8 @@
* Added CONFIGFS_EATTR() macros from original configfs.h macros
* Copright (C) 2008-2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
*
- * Please read Documentation/filesystems/configfs.txt before using the
- * configfs interface, ESPECIALLY the parts about reference counts and
+ * Please read Documentation/filesystems/configfs/configfs.txt before using
+ * the configfs interface, ESPECIALLY the parts about reference counts and
* item destructors.
*/
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 32bff6d86cb..8260b13d93c 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -505,7 +505,7 @@ config NETFILTER_XT_TARGET_LED
echo netfilter-ssh > /sys/class/leds/<ledname>/trigger
For more information on the LEDs available on your system, see
- Documentation/leds-class.txt
+ Documentation/leds/leds-class.txt
config NETFILTER_XT_TARGET_MARK
tristate '"MARK" target support'
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 6c93e051f9a..6c9e8e8f45f 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -432,9 +432,7 @@ config SOUND_SB
ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
for cards based on ESS chips (read
<file:Documentation/sound/oss/ESS1868> and
- <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
- 64, say Y here and also to "AWE32 synth" below and read
- <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
+ <file:Documentation/sound/oss/ESS>). If you have an IBM Mwave
card, say Y here and read <file:Documentation/sound/oss/mwave>.
If you compile the driver into the kernel and don't want to use
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index fe02903f7d0..80d9598db31 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -341,7 +341,7 @@ const char *perf_config_dirname(const char *name, const char *value)
static int perf_default_core_config(const char *var __used, const char *value __used)
{
- /* Add other config variables here and to Documentation/config.txt. */
+ /* Add other config variables here. */
return 0;
}
@@ -350,7 +350,7 @@ int perf_default_config(const char *var, const char *value, void *dummy __used)
if (!prefixcmp(var, "core."))
return perf_default_core_config(var, value);
- /* Add other config variables here and to Documentation/config.txt. */
+ /* Add other config variables here. */
return 0;
}