Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c embedded fixes from Wolfram Sang:
 "Here are some typical i2c driver bugfixes for 3.4.  Missed clock
  handling, improper timeout fixes, hardware wrokarounds...  All
  patches have been in linux-next for a few days, too."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: mxs: disable QUEUE when sending is done
  i2c: mxs: handle spurious interrupt
  i2c-eg20t: Modify MODULE_AUTHOR's email address
  i2c-eg20t: change timeout value 50msec to 1000msec
  i2c: tegra: Add delay before resetting the controller after NACK
  i2c: pnx: Disable clk in suspend

4 files changed, 15 insertions, 8 deletions

diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index f086131cb1c..c811289b61e 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -324,7 +324,7 @@ static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
 {
 	long ret;
 	ret = wait_event_timeout(pch_event,
-			(adap->pch_event_flag != 0), msecs_to_jiffies(50));
+			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
 
 	if (ret == 0) {
 		pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
@@ -1063,6 +1063,6 @@ module_exit(pch_pci_exit);
 
 MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.lapis-semi.com>");
+MODULE_AUTHOR("Tomoya MORINAGA. <tomoya.rohm@gmail.com>");
 module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
 module_param(pch_clk, int, (S_IRUSR | S_IWUSR));
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 3d471d56bf1..76b8af44f63 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -227,6 +227,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		return -EINVAL;
 
 	init_completion(&i2c->cmd_complete);
+	i2c->cmd_err = 0;
 
 	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 
@@ -252,6 +253,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 
 	if (i2c->cmd_err == -ENXIO)
 		mxs_i2c_reset(i2c);
+	else
+		writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
+				i2c->regs + MXS_I2C_QUEUECTRL_CLR);
 
 	dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
 
@@ -299,8 +303,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 		    MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ))
 		/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
 		i2c->cmd_err = -EIO;
-	else
-		i2c->cmd_err = 0;
 
 	is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
 		MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
@@ -384,8 +386,6 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev)
 	if (ret)
 		return -EBUSY;
 
-	writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
-			i2c->regs + MXS_I2C_QUEUECTRL_CLR);
 	writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
 
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 04be9f82e14..eb8ad538c79 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 {
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
-	/* FIXME: shouldn't this be clk_disable? */
-	clk_enable(alg_data->clk);
+	clk_disable(alg_data->clk);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index e978635e60f..55e5ea62cce 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -516,6 +516,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
 		return 0;
 
+	/*
+	 * NACK interrupt is generated before the I2C controller generates the
+	 * STOP condition on the bus. So wait for 2 clock periods before resetting
+	 * the controller so that STOP condition has been delivered properly.
+	 */
+	if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
+		udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
+
 	tegra_i2c_init(i2c_dev);
 	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
 		if (msg->flags & I2C_M_IGNORE_NAK)