diff options
Diffstat (limited to 'Documentation/crypto')
| -rw-r--r-- | Documentation/crypto/async-tx-api.txt | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/Documentation/crypto/async-tx-api.txt b/Documentation/crypto/async-tx-api.txt new file mode 100644 index 00000000000..c1e9545c59b --- /dev/null +++ b/Documentation/crypto/async-tx-api.txt @@ -0,0 +1,219 @@ + Asynchronous Transfers/Transforms API + +1 INTRODUCTION + +2 GENEALOGY + +3 USAGE +3.1 General format of the API +3.2 Supported operations +3.3 Descriptor management +3.4 When does the operation execute? +3.5 When does the operation complete? +3.6 Constraints +3.7 Example + +4 DRIVER DEVELOPER NOTES +4.1 Conformance points +4.2 "My application needs finer control of hardware channels" + +5 SOURCE + +--- + +1 INTRODUCTION + +The async_tx API provides methods for describing a chain of asynchronous +bulk memory transfers/transforms with support for inter-transactional +dependencies. It is implemented as a dmaengine client that smooths over +the details of different hardware offload engine implementations. Code +that is written to the API can optimize for asynchronous operation and +the API will fit the chain of operations to the available offload +resources. + +2 GENEALOGY + +The API was initially designed to offload the memory copy and +xor-parity-calculations of the md-raid5 driver using the offload engines +present in the Intel(R) Xscale series of I/O processors. It also built +on the 'dmaengine' layer developed for offloading memory copies in the +network stack using Intel(R) I/OAT engines. The following design +features surfaced as a result: +1/ implicit synchronous path: users of the API do not need to know if + the platform they are running on has offload capabilities. The + operation will be offloaded when an engine is available and carried out + in software otherwise. +2/ cross channel dependency chains: the API allows a chain of dependent + operations to be submitted, like xor->copy->xor in the raid5 case. The + API automatically handles cases where the transition from one operation + to another implies a hardware channel switch. +3/ dmaengine extensions to support multiple clients and operation types + beyond 'memcpy' + +3 USAGE + +3.1 General format of the API: +struct dma_async_tx_descriptor * +async_<operation>(<op specific parameters>, + enum async_tx_flags flags, + struct dma_async_tx_descriptor *dependency, + dma_async_tx_callback callback_routine, + void *callback_parameter); + +3.2 Supported operations: +memcpy - memory copy between a source and a destination buffer +memset - fill a destination buffer with a byte value +xor - xor a series of source buffers and write the result to a + destination buffer +xor_zero_sum - xor a series of source buffers and set a flag if the + result is zero. The implementation attempts to prevent + writes to memory + +3.3 Descriptor management: +The return value is non-NULL and points to a 'descriptor' when the operation +has been queued to execute asynchronously. Descriptors are recycled +resources, under control of the offload engine driver, to be reused as +operations complete. When an application needs to submit a chain of +operations it must guarantee that the descriptor is not automatically recycled +before the dependency is submitted. This requires that all descriptors be +acknowledged by the application before the offload engine driver is allowed to +recycle (or free) the descriptor. A descriptor can be acked by one of the +following methods: +1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted +2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent + descriptor of a new operation. +3/ calling async_tx_ack() on the descriptor. + +3.4 When does the operation execute? +Operations do not immediately issue after return from the +async_<operation> call. Offload engine drivers batch operations to +improve performance by reducing the number of mmio cycles needed to +manage the channel. Once a driver-specific threshold is met the driver +automatically issues pending operations. An application can force this +event by calling async_tx_issue_pending_all(). This operates on all +channels since the application has no knowledge of channel to operation +mapping. + +3.5 When does the operation complete? +There are two methods for an application to learn about the completion +of an operation. +1/ Call dma_wait_for_async_tx(). This call causes the CPU to spin while + it polls for the completion of the operation. It handles dependency + chains and issuing pending operations. +2/ Specify a completion callback. The callback routine runs in tasklet + context if the offload engine driver supports interrupts, or it is + called in application context if the operation is carried out + synchronously in software. The callback can be set in the call to + async_<operation>, or when the application needs to submit a chain of + unknown length it can use the async_trigger_callback() routine to set a + completion interrupt/callback at the end of the chain. + +3.6 Constraints: +1/ Calls to async_<operation> are not permitted in IRQ context. Other + contexts are permitted provided constraint #2 is not violated. +2/ Completion callback routines cannot submit new operations. This + results in recursion in the synchronous case and spin_locks being + acquired twice in the asynchronous case. + +3.7 Example: +Perform a xor->copy->xor operation where each operation depends on the +result from the previous operation: + +void complete_xor_copy_xor(void *param) +{ + printk("complete\n"); +} + +int run_xor_copy_xor(struct page **xor_srcs, + int xor_src_cnt, + struct page *xor_dest, + size_t xor_len, + struct page *copy_src, + struct page *copy_dest, + size_t copy_len) +{ + struct dma_async_tx_descriptor *tx; + + tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, + ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL); + tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, + ASYNC_TX_DEP_ACK, tx, NULL, NULL); + tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, + ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, + tx, complete_xor_copy_xor, NULL); + + async_tx_issue_pending_all(); +} + +See include/linux/async_tx.h for more information on the flags. See the +ops_run_* and ops_complete_* routines in drivers/md/raid5.c for more +implementation examples. + +4 DRIVER DEVELOPMENT NOTES +4.1 Conformance points: +There are a few conformance points required in dmaengine drivers to +accommodate assumptions made by applications using the async_tx API: +1/ Completion callbacks are expected to happen in tasklet context +2/ dma_async_tx_descriptor fields are never manipulated in IRQ context +3/ Use async_tx_run_dependencies() in the descriptor clean up path to + handle submission of dependent operations + +4.2 "My application needs finer control of hardware channels" +This requirement seems to arise from cases where a DMA engine driver is +trying to support device-to-memory DMA. The dmaengine and async_tx +implementations were designed for offloading memory-to-memory +operations; however, there are some capabilities of the dmaengine layer +that can be used for platform-specific channel management. +Platform-specific constraints can be handled by registering the +application as a 'dma_client' and implementing a 'dma_event_callback' to +apply a filter to the available channels in the system. Before showing +how to implement a custom dma_event callback some background of +dmaengine's client support is required. + +The following routines in dmaengine support multiple clients requesting +use of a channel: +- dma_async_client_register(struct dma_client *client) +- dma_async_client_chan_request(struct dma_client *client) + +dma_async_client_register takes a pointer to an initialized dma_client +structure. It expects that the 'event_callback' and 'cap_mask' fields +are already initialized. + +dma_async_client_chan_request triggers dmaengine to notify the client of +all channels that satisfy the capability mask. It is up to the client's +event_callback routine to track how many channels the client needs and +how many it is currently using. The dma_event_callback routine returns a +dma_state_client code to let dmaengine know the status of the +allocation. + +Below is the example of how to extend this functionality for +platform-specific filtering of the available channels beyond the +standard capability mask: + +static enum dma_state_client +my_dma_client_callback(struct dma_client *client, + struct dma_chan *chan, enum dma_state state) +{ + struct dma_device *dma_dev; + struct my_platform_specific_dma *plat_dma_dev; + + dma_dev = chan->device; + plat_dma_dev = container_of(dma_dev, + struct my_platform_specific_dma, + dma_dev); + + if (!plat_dma_dev->platform_specific_capability) + return DMA_DUP; + + . . . +} + +5 SOURCE +include/linux/dmaengine.h: core header file for DMA drivers and clients +drivers/dma/dmaengine.c: offload engine channel management routines +drivers/dma/: location for offload engine drivers +include/linux/async_tx.h: core header file for the async_tx api +crypto/async_tx/async_tx.c: async_tx interface to dmaengine and common code +crypto/async_tx/async_memcpy.c: copy offload +crypto/async_tx/async_memset.c: memory fill offload +crypto/async_tx/async_xor.c: xor and xor zero sum offload |