From 98d996b93e025c8bd0aa8ea15717aae6d3a081ed Mon Sep 17 00:00:00 2001 From: Gilbok Lee Date: Thu, 20 Jun 2024 12:45:13 +0900 Subject: [All] Add vf2 media-config based on generic and include esplusplayer.ini [Version] 0.3.83 [Issue type] Update Change-Id: I3b8401ee90106d7335292e827b5ac0efe859735c --- media-config-target-vf2/hal/etc/asound.conf | 11 + .../hal/etc/inference/inference_engine.ini | 3 + .../hal/etc/multimedia/esplusplayer.ini | 16 + .../hal/etc/multimedia/media-vision-config.json | 317 +++++++++++ .../hal/etc/multimedia/mmfw_audio_pcm_dump.ini | 8 + .../hal/etc/multimedia/mmfw_audio_volume.ini | 19 + .../hal/etc/multimedia/mmfw_camcorder.ini | 103 ++++ .../hal/etc/multimedia/mmfw_camcorder_camera0.ini | 208 ++++++++ .../hal/etc/multimedia/mmfw_image_util.ini | 4 + .../hal/etc/multimedia/mmfw_media_codec.ini | 89 ++++ .../hal/etc/multimedia/mmfw_media_editor.ini | 20 + .../hal/etc/multimedia/mmfw_media_streamer.ini | 124 +++++ .../hal/etc/multimedia/mmfw_media_transporter.ini | 117 ++++ .../hal/etc/multimedia/mmfw_player.ini | 102 ++++ .../etc/multimedia/mmfw_player_audio_effect.ini | 17 + .../hal/etc/multimedia/mmfw_resource_manager.ini | 9 + .../hal/etc/multimedia/mmfw_streamrecorder.ini | 81 +++ .../hal/etc/multimedia/mmfw_webrtc.ini | 172 ++++++ .../hal/etc/multimedia/mmfw_wfd_sink.ini | 231 ++++++++ .../hal/etc/multimedia/mused.conf | 66 +++ .../hal/etc/multimedia/scmirroring_src.ini | 114 ++++ .../hal/etc/multimedia/vision_source.ini | 9 + media-config-target-vf2/hal/etc/murphy/murphy.lua | 99 ++++ media-config-target-vf2/hal/etc/pulse/client.conf | 37 ++ media-config-target-vf2/hal/etc/pulse/daemon.conf | 83 +++ media-config-target-vf2/hal/etc/pulse/default.pa | 149 ++++++ .../hal/etc/pulse/device-map.json | 26 + .../hal/etc/pulse/stream-map.json | 191 +++++++ media-config-target-vf2/hal/etc/pulse/system.pa | 74 +++ .../hal/etc/vision/depth/backend_path.ini | 6 + media-config-target-vf2/hal/etc/xdg/gstomx.conf | 84 +++ .../alsa-mixer/paths/analog-input-aux.conf | 65 +++ .../alsa-mixer/paths/analog-input-dock-mic.conf | 104 ++++ .../alsa-mixer/paths/analog-input-fm.conf | 65 +++ .../alsa-mixer/paths/analog-input-front-mic.conf | 104 ++++ .../paths/analog-input-headphone-mic.conf | 102 ++++ .../alsa-mixer/paths/analog-input-headset-mic.conf | 114 ++++ .../paths/analog-input-internal-mic-always.conf | 133 +++++ .../paths/analog-input-internal-mic.conf | 154 ++++++ .../alsa-mixer/paths/analog-input-linein.conf | 144 +++++ .../alsa-mixer/paths/analog-input-mic-line.conf | 66 +++ .../alsa-mixer/paths/analog-input-mic.conf | 141 +++++ .../alsa-mixer/paths/analog-input-mic.conf.common | 60 +++ .../alsa-mixer/paths/analog-input-rear-mic.conf | 104 ++++ .../alsa-mixer/paths/analog-input-tvtuner.conf | 65 +++ .../alsa-mixer/paths/analog-input-video.conf | 64 +++ .../pulseaudio/alsa-mixer/paths/analog-input.conf | 102 ++++ .../alsa-mixer/paths/analog-input.conf.common | 289 ++++++++++ .../alsa-mixer/paths/analog-output-chat.conf | 5 + .../paths/analog-output-headphones-2.conf | 118 +++++ .../alsa-mixer/paths/analog-output-headphones.conf | 180 +++++++ .../alsa-mixer/paths/analog-output-lineout.conf | 214 ++++++++ .../alsa-mixer/paths/analog-output-mono.conf | 99 ++++ .../paths/analog-output-speaker-always.conf | 187 +++++++ .../alsa-mixer/paths/analog-output-speaker.conf | 246 +++++++++ .../pulseaudio/alsa-mixer/paths/analog-output.conf | 88 +++ .../alsa-mixer/paths/analog-output.conf.common | 186 +++++++ .../pulseaudio/alsa-mixer/paths/hdmi-output-0.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-1.conf | 12 + .../alsa-mixer/paths/hdmi-output-10.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-2.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-3.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-4.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-5.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-6.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-7.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-8.conf | 12 + .../pulseaudio/alsa-mixer/paths/hdmi-output-9.conf | 12 + .../alsa-mixer/paths/iec958-stereo-input.conf | 20 + .../alsa-mixer/paths/iec958-stereo-output.conf | 18 + .../steelseries-arctis-output-chat-common.conf | 27 + .../steelseries-arctis-output-game-common.conf | 27 + .../alsa-mixer/paths/usb-gaming-headset-input.conf | 34 ++ .../paths/usb-gaming-headset-output-mono.conf | 34 ++ .../paths/usb-gaming-headset-output-stereo.conf | 34 ++ .../alsa-mixer/paths/virtual-surround-7.1.conf | 5 + .../pulseaudio/alsa-mixer/profile-sets/audigy.conf | 94 ++++ .../alsa-mixer/profile-sets/behringer-umc22.conf | 68 +++ .../cmedia-high-speed-true-hdaudio.conf | 66 +++ .../alsa-mixer/profile-sets/default.conf | 589 +++++++++++++++++++++ .../profile-sets/dell-dock-tb16-usb-audio.conf | 55 ++ .../profile-sets/force-speaker-and-int-mic.conf | 153 ++++++ .../alsa-mixer/profile-sets/force-speaker.conf | 152 ++++++ .../profile-sets/hp-tbt-dock-120w-g2.conf | 35 ++ .../profile-sets/hp-tbt-dock-audio-module.conf | 36 ++ .../alsa-mixer/profile-sets/kinect-audio.conf | 38 ++ .../profile-sets/maudio-fasttrack-pro.conf | 86 +++ .../profile-sets/native-instruments-audio4dj.conf | 90 ++++ .../profile-sets/native-instruments-audio8dj.conf | 161 ++++++ .../native-instruments-komplete-audio6.conf | 111 ++++ .../native-instruments-korecontroller.conf | 84 +++ .../native-instruments-traktor-audio10.conf | 130 +++++ .../native-instruments-traktor-audio2.conf | 53 ++ .../native-instruments-traktor-audio6.conf | 91 ++++ .../native-instruments-traktorkontrol-s4.conf | 80 +++ .../profile-sets/sb-omni-surround-5.1.conf | 112 ++++ .../alsa-mixer/profile-sets/sennheiser-gsx.conf | 58 ++ .../profile-sets/simple-headphones-mic.conf | 42 ++ .../steelseries-arctis-common-usb-audio.conf | 23 + .../alsa-mixer/profile-sets/tizen_usb.conf | 136 +++++ .../profile-sets/usb-gaming-headset.conf | 64 +++ 101 files changed, 8726 insertions(+) create mode 100644 media-config-target-vf2/hal/etc/asound.conf create mode 100644 media-config-target-vf2/hal/etc/inference/inference_engine.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/esplusplayer.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/media-vision-config.json create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_audio_pcm_dump.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_audio_volume.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder_camera0.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_image_util.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_media_codec.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_media_editor.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_media_streamer.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_media_transporter.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_player.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_player_audio_effect.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_resource_manager.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_streamrecorder.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_webrtc.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mmfw_wfd_sink.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/mused.conf create mode 100644 media-config-target-vf2/hal/etc/multimedia/scmirroring_src.ini create mode 100644 media-config-target-vf2/hal/etc/multimedia/vision_source.ini create mode 100644 media-config-target-vf2/hal/etc/murphy/murphy.lua create mode 100644 media-config-target-vf2/hal/etc/pulse/client.conf create mode 100644 media-config-target-vf2/hal/etc/pulse/daemon.conf create mode 100644 media-config-target-vf2/hal/etc/pulse/default.pa create mode 100644 media-config-target-vf2/hal/etc/pulse/device-map.json create mode 100644 media-config-target-vf2/hal/etc/pulse/stream-map.json create mode 100644 media-config-target-vf2/hal/etc/pulse/system.pa create mode 100644 media-config-target-vf2/hal/etc/vision/depth/backend_path.ini create mode 100644 media-config-target-vf2/hal/etc/xdg/gstomx.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf create mode 100644 media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf (limited to 'media-config-target-vf2') diff --git a/media-config-target-vf2/hal/etc/asound.conf b/media-config-target-vf2/hal/etc/asound.conf new file mode 100644 index 0000000..acaf318 --- /dev/null +++ b/media-config-target-vf2/hal/etc/asound.conf @@ -0,0 +1,11 @@ +# default sound configuration + +pcm. !default { + type hw + card 0 +} + +ctl. !default { + type hw + card 0 +} diff --git a/media-config-target-vf2/hal/etc/inference/inference_engine.ini b/media-config-target-vf2/hal/etc/inference/inference_engine.ini new file mode 100644 index 0000000..10f1889 --- /dev/null +++ b/media-config-target-vf2/hal/etc/inference/inference_engine.ini @@ -0,0 +1,3 @@ +[inference backend] +;/*OPENCV=0, Tensorflow-lite=1, ARMNN=2, MLAPI=3, ONE(On-device Neural Engine)=4, NNTRAINER=5, SNPE=6 +supported backend types = 0,1,3,5 diff --git a/media-config-target-vf2/hal/etc/multimedia/esplusplayer.ini b/media-config-target-vf2/hal/etc/multimedia/esplusplayer.ini new file mode 100644 index 0000000..0b1e914 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/esplusplayer.ini @@ -0,0 +1,16 @@ +{ + "version" : "0.0.4948390.firmware", + "gstparam1" : "--gst-debug=*:2", + "gstparam2" : "--gst-disable-segtrap", + "gstparam3" : "--gst-plugin-load=", + "gstparam4" : "--gst-disable-registry-fork", + "gstparam5" : "--gst-disable-registry-update", + "tz_video_es_dump" : false, + "tz_video_dump_insert_vp9_header" : false, + "tz_audio_es_dump" : false, + "generate_dot" : false, + "force_sw_audio_codec" : false, + "force_sw_video_codec" : true, + "fallback_to_sw_audio_codec" : false, + "fallback_to_sw_video_codec" : false +} diff --git a/media-config-target-vf2/hal/etc/multimedia/media-vision-config.json b/media-config-target-vf2/hal/etc/multimedia/media-vision-config.json new file mode 100644 index 0000000..83dc6bd --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/media-vision-config.json @@ -0,0 +1,317 @@ +{ + "attributes": + [ + { + "name" : "MV_FACE_DETECTION_MODEL_FILE_PATH", + "type" : "string", + "value" : "/usr/share/OpenCV/haarcascades/haarcascade_frontalface_alt2.xml" + }, + { + "name" : "MV_FACE_DETECTION_ROI_X", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_FACE_DETECTION_ROI_Y", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_FACE_DETECTION_ROI_WIDTH", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_FACE_DETECTION_ROI_HEIGHT", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_FACE_DETECTION_MIN_SIZE_WIDTH", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_FACE_DETECTION_MIN_SIZE_HEIGHT", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_BARCODE_GENERATE_ATTR_TEXT", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_GENERATE_ATTR_COLOR_FRONT", + "type" : "string", + "value" : "000000" + }, + { + "name" : "MV_BARCODE_GENERATE_ATTR_COLOR_BACK", + "type" : "string", + "value" : "ffffff" + }, + { + "name" : "MV_BARCODE_DETECT_ATTR_TARGET", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_DETECT_ATTR_ROTATION_DEGREES", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_DETECT_ATTR_ROTATION_COUNT", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_DETECT_ATTR_ROTATION_DIRECTION", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_DETECT_ATTR_USE_ENHANCEMENT", + "type" : "boolean", + "value" : false + }, + { + "name" : "MV_IMAGE_RECOGNITION_OBJECT_SCALE_FACTOR", + "type" : "double", + "value" : 1.2 + }, + { + "name" : "MV_IMAGE_RECOGNITION_OBJECT_MAX_KEYPOINTS_NUM", + "type" : "integer", + "value" : 1000 + }, + { + "name" : "MV_IMAGE_RECOGNITION_SCENE_SCALE_FACTOR", + "type" : "double", + "value" : 1.2 + }, + { + "name" : "MV_IMAGE_RECOGNITION_SCENE_MAX_KEYPOINTS_NUM", + "type" : "integer", + "value" : 5000 + }, + { + "name" : "MV_IMAGE_RECOGNITION_MIN_MATCH_NUM", + "type" : "integer", + "value" : 30 + }, + { + "name" : "MV_IMAGE_RECOGNITION_REQ_MATCH_PART", + "type" : "double", + "value" : 0.05 + }, + { + "name" : "MV_IMAGE_RECOGNITION_TOLERANT_MATCH_PART_ERR", + "type" : "double", + "value" : 0.1 + }, + { + "name" : "MV_IMAGE_TRACKING_HISTORY_AMOUNT", + "type" : "integer", + "value" : 3 + }, + { + "name" : "MV_IMAGE_TRACKING_EXPECTED_OFFSET", + "type" : "double", + "value" : 0 + }, + { + "name" : "MV_IMAGE_TRACKING_USE_STABLIZATION", + "type" : "boolean", + "value" : true + }, + { + "name" : "MV_IMAGE_TRACKING_STABLIZATION_TOLERANT_SHIFT", + "type" : "double", + "value" : 0.00006 + }, + { + "name" : "MV_IMAGE_TRACKING_STABLIZATION_SPEED", + "type" : "double", + "value" : 0.3 + }, + { + "name" : "MV_IMAGE_TRACKING_STABLIZATION_ACCELERATION", + "type" : "double", + "value" : 0.1 + }, + { + "name" : "MV_FACE_RECOGNITION_MODEL_TYPE", + "type" : "integer", + "value" : 3 + }, + { + "name" : "MV_SURVEILLANCE_FACE_RECOGNITION_MODEL_FILE_PATH", + "type" : "string", + "value" : "" + }, + { + "name" : "MV_SURVEILLANCE_MOVEMENT_DETECTION_THRESHOLD", + "type" : "integer", + "value" : 10 + }, + { + "name" : "MV_SURVEILLANCE_SKIP_FRAMES_COUNT", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_INFERENCE_INPUT_TENSOR_WIDTH", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_INFERENCE_INPUT_TENSOR_HEIGHT", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_INFERENCE_INPUT_TENSOR_CHANNELS", + "type" : "integer", + "value" : -1 + }, + { + "name" : "MV_INFERENCE_INPUT_DATA_TYPE", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_INFERENCE_MODEL_CONFIGURATION_FILE_PATH", + "type" : "string", + "value" : "" + }, + { + "name" : "MV_INFERENCE_MODEL_WEIGHT_FILE_PATH", + "type" : "string", + "value" : "" + }, + { + "name" : "MV_INFERENCE_MODEL_USER_FILE_PATH", + "type" : "string", + "value" : "" + }, + { + "name" : "MV_INFERENCE_MODEL_MEAN_VALUE", + "type" : "double", + "value" : 127.5 + }, + { + "name" : "MV_INFERENCE_BACKEND_TYPE", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_INFERENCE_TARGET_DEVICE_TYPE", + "type" : "integer", + "value" : 1 + }, + { + "name" : "MV_INFERENCE_MODEL_STD_VALUE", + "type" : "double", + "value" : 1.0 + }, + { + "name" : "MV_INFERENCE_OUTPUT_MAX_NUMBER", + "type" : "integer", + "value" : 5 + }, + { + "name" : "MV_INFERENCE_CONFIDENCE_THRESHOLD", + "type" : "double", + "value" : 0.6 + }, + { + "name" : "MV_INFERENCE_INPUT_NODE_NAME", + "type" : "string", + "value" : "input" + }, + { + "name" : "MV_INFERENCE_OUTPUT_NODE_NAMES", + "type" : "array", + "subtype" : "string", + "value" : [ "output" + ] + }, + { + "name" : "MV_INFERENCE_MODEL_META_FILE_PATH", + "type" : "string", + "value" : "" + }, + { + "name" : "MV_ROI_TRACKER_TYPE", + "type" : "integer", + "value" : 2 + }, + { + "name" : "MV_3D_DEPTH_MODE", + "type" : "integer", + "value" : 1 + }, + { + "name" : "MV_3D_DEPTH_WIDTH", + "type" : "integer", + "value" : 640 + }, + { + "name" : "MV_3D_DEPTH_HEIGHT", + "type" : "integer", + "value" : 480 + }, + { + "name" : "MV_3D_DEPTH_MIN_DISPARITY", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_3D_DEPTH_MAX_DISPARITY", + "type" : "integer", + "value" : 64 + }, + { + "name" : "MV_3D_DEPTH_STEREO_CONFIG_FILE_PATH", + "type" : "string", + "value" : "" + }, + { + "name" : "MV_3D_POINTCLOUD_SAMPLING_RATIO", + "type" : "double", + "value" : 1.0 + }, + { + "name" : "MV_3D_POINTCLOUD_OUTLIER_REMOVAL_POINTS", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_3D_POINTCLOUD_OUTLIER_REMOVAL_RADIUS", + "type" : "double", + "value" : 0.0 + }, + { + "name" : "MV_3D_POINTCLOUD_OUTPUT_FILE_PATH", + "type" : "string", + "value" : "/opt/usr/home/owner/media/Images" + }, + { + "name" : "MV_BARCODE_GENERATE_ATTR_DATA_SHAPE", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_GENERATE_ATTR_FINDER_SHAPE", + "type" : "integer", + "value" : 0 + }, + { + "name" : "MV_BARCODE_GENERATE_ATTR_EMBED_IMG_PATH", + "type" : "string", + "value" : "" + } + ] +} diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_audio_pcm_dump.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_audio_pcm_dump.ini new file mode 100644 index 0000000..6e13b68 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_audio_pcm_dump.ini @@ -0,0 +1,8 @@ +[pcm_dump] +;playback +pa_sink = 0 +pa_sink_input = 0 + +;capture +pa_source = 0 +pa_source_output = 0 diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_audio_volume.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_audio_volume.ini new file mode 100644 index 0000000..ae7e635 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_audio_volume.ini @@ -0,0 +1,19 @@ +[volumes] +system = 0, 72, 73, 74, 75, 76, 77, 78, 80, 81, 82, 84, 86, 88, 90, 94 +notification = 0, 68, 70, 72, 73, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 97 +alarm = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92 +ringtone = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92 +media = 0, 46, 50, 53, 58, 62, 68, 72, 76, 80, 84, 87, 90, 93, 96, 100 +call = 60, 65, 70, 76, 82, 88, 94, 100 +voip = 60, 65, 70, 76, 82, 88, 94, 100 +voice = 0, 55, 58, 61, 64, 67, 70, 75, 78, 82, 86, 89, 91, 94, 97, 100 +gain_dialer = 1.00 +gain_touch = 1.00 +gain_af = 0.70 +gain_shutter1 = 0.14 +gain_shutter2 = 1.00 +gain_camcording = 0.30 +gain_midi = 1.00 +gain_booting = 0.40 +gain_video = 0.90 +gain_tts = 1.00 diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder.ini new file mode 100644 index 0000000..7c62240 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder.ini @@ -0,0 +1,103 @@ +; < Camera/Camcorder Configure Main INI file > +; +; - Header List - +; 1. General +; 2. VideoInput +; 3. AudioInput +; 4. VideoOutput +; 5. Capture +; 6. Record +; 7. VideoEncoder +; 8. AudioEncoder +; 9. ImageEncoder +; 10. Mux +; +; - Note - +; If you want to add a new header, +; add a new enum value to "enum ConfigureCategoryMain" +; and new default table for it in mm_camcorder_configure.c/.h +; + +[General] +;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE +; LogLevel(default:3) +;;; 0:Critical, 1: Error, 2: Warning, 3: Info, 4: Debug, 5: Verbose +LogLevel = 3 + +[VideoInput] +VideosrcElement = tizencamerasrc | 1,0 | do-timestamp,1 +UseVideoscale = 1 +VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1 +UseZeroCopyFormat = 0 +DeviceCount = 1 +SupportMediaPacketPreviewCb = 1 + +[AudioInput] +AudioDevice = 0,1 || 0 +AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1 +AudiomodemsrcElement = pulsesrc | 1,0 | do-timestamp,1 + +[VideoOutput] +; DisplayDevice +;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT +DisplayDevice = 0 || 0 +; DisplayMode +;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen +DisplayMode = 0,1,2 || 0 +; Videosink +;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote +Videosink = 0,3,4 || 3 +VideosinkElementOverlay = tizenwlsink | 7,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0 | use-tbm,0 +VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0 +VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0 +UseVideoconvert = 1 +VideoconvertElement = videoconvert | 0,0 + +[VideoEncoder] +MPEG4 = avenc_mpeg4 | 0,0 + +[AudioEncoder] +AMR = amrnbenc | 0,0 +AAC = avenc_aac | 1,0 | compliance,-2 +WAVE = wavenc | 0,0 + +[ImageEncoder] +JPEG = jpegenc | 0,0 +;PNG = pngenc | 0,0 + +[Capture] +; CaptureMode +;;; 0: Encodebin, 1: Camera control(plugin), 2: Image pad(plugin) +CaptureMode = 0 +VideoscaleElement = videoscale | 1,0 | method,1 + +[Record] +UseAudioEncoderQueue = 1 +UseVideoEncoderQueue = 0 +VideoProfile = 0 +VideoAutoAudioConvert = 1 +VideoAutoAudioResample = 0 +VideoAutoColorSpace = 1 +AudioProfile = 1 +AudioAutoAudioConvert = 1 +AudioAutoAudioResample = 0 +AudioAutoColorSpace = 0 +ImageProfile = 2 +ImageAutoAudioConvert = 0 +ImageAutoAudioResample = 0 +ImageAutoColorSpace = 1 +RecordsinkElement = filesink | 1,0 | async,0 +UseNoiseSuppressor = 0 +DropVideoFrame = 0 +PassFirstVideoFrame = 0 + +[Mux] +3GP = 3gppmux | 0,0 +AMR = avmux_amr | 0,0 +MP4 = mp4mux | 0,0 +AVI = avimux | 0,0 +MATROSKA = matroskamux | 0,0 +WAV = wavenc | 0,0 +AAC = avmux_adts | 0,0 +M2TS = mpegtsmux | 0,0 + diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder_camera0.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder_camera0.ini new file mode 100644 index 0000000..dea154c --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_camcorder_camera0.ini @@ -0,0 +1,208 @@ +; < Camera/Camcorder Configure Control INI file > +; +; - Header List - +; 1. Camera +; 2. Strobe +; 3. Effect +; 4. Photograph +; 5. Capture +; 6. Detect +; +; - Note - +; If you want to add a new header, +; add a new enum value to "enum ConfigureCategoryControl" +; and new default table for it in mm_camcorder_configure.c/.h +; + +[Camera] +; Input index - real setting value +;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA +; Input index - MSL value(convert array index) +;;; -1:NONE, 0:CAMERA0, 1:CAMERA1 +InputIndex = 0,-255 || 0 +DeviceName = USB_CAMERA +PreviewResolution = 320,240 | 640,480 || 640,480 +CaptureResolution = 320,240 | 640,480 || 640,480 +VideoResolution = 320,240 | 640,480 || 640,480 +FPS0 = 0,15,30 || 15 +FPS1 = 0,15,30 || 15 +; PictureForamt - MSL value +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +PictureFormat = 7 || 7 +Overlay = 0,1 || 1 +; Recommend display rotation +;;; 0:NONE, 1:90, 2:180, 3:270 +RecommendDisplayRotation = 0 +; Recommend preview format for capture +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +RecommendPreviewFormatCapture = 7 +; Recommend preview format for record +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +RecommendPreviewFormatRecord = 7 +; Recommend preview resolution +;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9), 2: SQUARE ratio(1:1) +RecommendPreviewResolution = 640,480 | 640,480 | 640,480 || 640,480 +; Camera facing direction +;;; 0:REAR, 1:FRONT +FacingDirection = 0 +FrameStabilityCount = 1 + + +[Strobe] +;StrobeControl - Not support +;StrobeCapabilities - Not support +; Strobe mode - real setting value +;;; N/A +; Strobe mode - MSL value(convert array index) +;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT +StrobeMode = 0,-255,-255,-255,-255,-255,-255,-255 || 0 +;StrobeStatus - Not support +;StrobeEV - Not support + + +[Effect] +Brightness = 0,8 || 4 +;Contrast = 1,7 || 4 +;Saturation = 0,4 || 2 +;Sharpness = 0,4 || 2 + +; White balance - real setting value +;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT +; White balance - MSL value(convert array index) +;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM +WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0 + +; Color tone - real setting value +;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM +;;; 11:VINTAGE_COLD, 12:SOLARIZE, 13:POSTERIZE, 14:POINT_BLUE, 15:POINT_RED_YELLOW, 16:POINT_COLOR_3, 17:POINT_GREEN, 18:POINT_RED, 19:POINT_YELLOW, 20:CARTOONIZE +; Color tone - MSL value(convert array index) +;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED, +;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED, +;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW +ColorTone = 1,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 1 +; Flip - real setting value +;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL +; Flip - MSL value(convert array index) +;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE +;Flip = 2,1,0 || 0 + +; Wide Dynamic Range - real setting value +;;; 0:OFF, 1:ON +; Wide Dynamic Range - MSL value(convert array index) +;;; 0:OFF, 1:ON, 2:AUTO +WDR = 0,-255,-255 || 0 + +; Part color mode - real setting value +;;; 0:OFF, 1:SWAP, 2:ACCENT +; Part color mode - MSL value(convert array index) +;;; 0:OFF, 1:SWAP, 2:ACCENT +;PartColorMode = 0,1,2 || 0 + +; Part color - real setting value +;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3, +;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY +; Part color - MSL value(convert array index) +;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3, +;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY +;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0 + + +[Photograph] +;LensInit = 0,1 || 0 +;DigitalZoom = 0,10 || 0 +;OpticalZoom = 0,0 || 0 + +; Focus mode - real setting value +;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS +; Focus mode - MSL value(convert array index) +;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS +FocusMode = 0,-255,-255,-255,-255,-255 || 0 + +; Auto focus type - real setting value +;;; 0:NORMAL, 1:MACRO, 2:FULL +; Auto focus - MSL value(convert array index) +;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL +AFType = 0,-255,-255,-255 || 0 + +; Auto exposure type - real setting value +;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX +; Auto exposure mode - MSL value(convert array index) +;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2 +AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0 + +;ExposureValue - Not support +;FNumber - Not support +;ShutterSpeed - Not support + +; ISO - real setting value +;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600 +; ISO - MSL value(convert array index) +;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200 +ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0 + +; Program mode - real setting value +;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN, +;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT +; Program mode - MSL value(convert array index) +;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE, +;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT +ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0 + +; Anti-handshake - real setting value +;;; 0:OFF, 1:ON +; Anti-handshake - MSL value(convert array index) +;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON +AntiHandshake = 0,-255,-255,-255 || 0 + +; Video-stabilization - real setting value +;;; 0:OFF, 1:ON +; Video-stabilization - MSL value(convert array index) +;;; 0:OFF, 1:ON +VideoStabilization = 0 || 0 + +; Face zoom mode +;;; 0:OFF, 1:ON +FaceZoomMode = 0 || 0 +; Face zoom level +FaceZoomLevel = 0,0 || 0 + +; PTZ(Pan Tilt Zoom) type +;;; 0:Mechanical, 1:Electronic +;PtzType = 0,1 || 1 + +; Pan range for mechanical movement +;PanMecha = -10,10 + +; Pan range for electronic movement +;PanElec = -10,10 + +; Tilt range for mechanical movement +;TiltMecha = -10,10 + +; Tilt range for electronic movement +;TiltElec = -10,10 + + +[Capture] +; Output mode +;;; No need to convert +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY +OutputMode = 7,13 || 13 +JpegQuality = 0,100 || 90 +MultishotNumber = 1,1 || 1 +SensorEncodedCapture = 0 +; Support HDR +;;; 0: OFF, 1: ON, 2: ON and Original +SupportHDR = 0,-255,-255 || 0 +FrameStabilityCount = 2 + + +[Detect] +; Detect mode +;;; 0:OFF, 1:ON +DetectMode = 0,-255 || 0 +;DetectNumber - Not support +;DetectFocusSelect - Not support +;DetectSelectNumber - Not support +;DetectStatus - Not support + diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_image_util.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_image_util.ini new file mode 100644 index 0000000..445703c --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_image_util.ini @@ -0,0 +1,4 @@ +[jpeg-xl] +; num of threads for jpeg-xl image format +decoding_threads=4 +encoding_threads=3 diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_media_codec.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_codec.ini new file mode 100644 index 0000000..9f2a5dd --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_codec.ini @@ -0,0 +1,89 @@ +[h261] +hw_decoder = , , +hw_encoder = , , +sw_decoder = , , +sw_encoder = , , + +[h263] +hw_decoder = omxdec_h263, video/x-h263, NV12 +hw_encoder = omxenc_h263, video/x-raw, H263 +sw_decoder = avdec_h263, video/x-h263, I420 +sw_encoder = avenc_h263, video/x-raw, H263 + +[h264] +hw_decoder = omxdec_h264, video/x-h264, NV12 +hw_encoder = omxenc_h264, video/x-raw, H264_SP +sw_decoder = avdec_h264, video/x-h264, I420 +sw_encoder = avenc_h264, video/x-raw, H264_SP + +[mpeg4] +hw_decoder = omxdec_mpeg4, video/mpeg, NV12 +hw_encoder = omxenc_mpeg4, video/x-raw, MPEG4_SP +sw_decoder = avdec_mpeg4, video/mpeg, I420 +sw_encoder = avenc_mpeg4, video/x-raw, MPEG4_SP + +[aac_lc] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_aac, audio/mpeg, PCM_F32LE +sw_encoder = avenc_aac, audio/x-raw, AAC_LC + +[aac_he] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_aac, audio/mpeg, PCM_F32LE +sw_encoder = , , + +[aac_he_ps] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_aac, audio/mpeg, PCM_F32LE +sw_encoder = , , + +[mp3] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_mp3, audio/mpeg, PCM_F32LE +sw_encoder = , , + +[amr_nb] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_amrnb, audio/AMR, PCM_F32LE +sw_encoder = amrnbenc, audio/x-raw, AMR_NB + +[amr_wb] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_amrwb, audio/AMR-WB, PCM_F32LE +sw_encoder = , , + +[vorbis] +hw_decoder = , , +hw_encoder = , , +sw_decoder = vorbisdec, audio/x-vorbis, PCM_F32LE +sw_encoder = , , + +[flac] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_flac, audio/x-flac, PCM_F32LE +sw_encoder = , , + +[wmav1] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_wmav1, audio/x-wma, PCM_F32LE +sw_encoder = , , + +[wmav2] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_wmav2, audio/x-wma, PCM_F32LE +sw_encoder = , , + +[wmapro] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_wmapro, audio/x-wma, PCM_F32LE +sw_encoder = , , diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_media_editor.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_editor.ini new file mode 100644 index 0000000..1475618 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_editor.ini @@ -0,0 +1,20 @@ +[general] +; generating dot file representing pipeline state +generate dot = no +dot path = /tmp + +; | separated list of arguments that will pass to gst_init +gstreamer arguments = --gst-disable-registry-update|--gst-disable-registry-fork|--gst-disable-segtrap|--gst-debug=*ges*:3,2 + +[encoder] +container = ogg +audio hw encoder = +video hw encoder = + +[decoder] +audio hw decoder = +video hw decoder = + +[resource acquisition] +video encoder = no +video decoder = no diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_media_streamer.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_streamer.ini new file mode 100644 index 0000000..527ab99 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_streamer.ini @@ -0,0 +1,124 @@ +[general] +; generating dot file representing pipeline state +generate dot = no +dot dir = + +; decodebin will be used instead of decoder node +use decodebin = yes + +; comma separated list of element names which +; will not be used in autoplug mode +exclude elements = v4l2video,v4l2h264,v4l2mpeg4,omx,sprd + +; comma separated list of element names which +; will require resources in autoplug mode +resource elements = omx,sprd + +; comma separated list of arguments +; that will pass to gst_init +gstreamer arguments = --gst-debug=2 + + +;MEDIA_STREAMER_NODE_TYPE_SRC +[node type 1] +audio capture = pulsesrc +video capture = waylandsrc +camera = v4l2src + +;MEDIA_STREAMER_NODE_TYPE_SINK +[node type 2] +audio = pulsesink +overlay = tizenwlsink + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_ENCODER +[node type 3] +video/x-h263 = avenc_h263 +;video/x-h264 = + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_DECODER +[node type 4] +video/x-h263 = avdec_h263 +;video/x-h264 = + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_ENCODER +[node type 5] +audio/AMR = amrnbenc + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_DECODER +[node type 6] +audio/AMR = amrnbdec + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_CONVERTER +[node type 7] +video/x-raw = videoconvert + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_CONVERTER +[node type 8] + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_RESAMPLE +[node type 9] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_PAY +[node type 10] +video/x-h263 = rtph263pay +;video/x-h264 = + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_PAY +[node type 11] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_DEPAY +[node type 12] +video/x-h263 = rtph263depay +video/x-h264 = rtph264depay + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_DEPAY +[node type 13] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_RATE +[node type 14] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_SCALE +[node type 15] + +;MEDIA_STREAMER_NODE_TYPE_TEXT_OVERLAY +[node type 16] +text/x-raw = textoverlay + +;MEDIA_STREAMER_NODE_TYPE_PARSER +[node type 17] +video/x-h263 = h263parse +video/x-h264 = h264parse + +;MEDIA_STREAMER_NODE_TYPE_FILTER +[node type 18] + +;MEDIA_STREAMER_NODE_TYPE_TEE +[node type 19] + +;MEDIA_STREAMER_NODE_TYPE_QUEUE +[node type 20] + +;MEDIA_STREAMER_NODE_TYPE_MQUEUE +[node type 21] + +;MEDIA_STREAMER_NODE_TYPE_MUXER +[node type 22] + +;MEDIA_STREAMER_NODE_TYPE_DEMUXER +[node type 23] + +;MEDIA_STREAMER_NODE_TYPE_RTP +[node type 24] + +;MEDIA_STREAMER_NODE_TYPE_INPUT_SELECTOR +[node type 25] + +;MEDIA_STREAMER_NODE_TYPE_OUTPUT_SELECTOR +[node type 26] + +;MEDIA_STREAMER_NODE_TYPE_INTERLEAVE +[node type 27] + +;MEDIA_STREAMER_NODE_TYPE_DEINTERLEAVE +[node type 28] + diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_media_transporter.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_transporter.ini new file mode 100644 index 0000000..8168790 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_media_transporter.ini @@ -0,0 +1,117 @@ +[general] +; generating dot file representing pipeline state +generate dot = no +dot path = /tmp + +; enable verbose logging +verbose log = no + +; | separated list of arguments that will pass to gst_init +gstreamer arguments = --gst-debug=*:2 + +; comma separated list of elements that will not use in the gstreamer pipeline +gstreamer excluded elements = + +; allowed timeout for changing pipeline state +timeout = 10 ; sec + +[connection] +rtsp server ip = 127.0.0.1 +rtsp server port = 8554 +rtsp server mount point = /mtpr_server/tmp + +[media source] +; default values for video source pipeline (e.g, videotest, camera, screen) +video raw format = I420 +video width = 320 +video height = 240 +video framerate = 30 +video codec = mpeg +video hw encoder element = +video encoded format support = no +video drc support = no +; default values for audio source pipeline (e.g, audiotest, mic) +audio raw format = F32LE +audio samplerate = 8000 +audio channels = 2 +audio codec = aac +audio hw encoder element = + +[source videotest] +source element = videotestsrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = is-live=1,pattern=18 +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codec = +;video hw encoder element = +;video encoded format support = +video drc support = yes + +[source camera] +source element = v4l2src +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codec = h264 +;video hw encoder element = v4l2h264enc +;video encoded format support = +;video drc support = + +[source screen] +source element = waylandsrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codec = +;video hw encoder element = +;video encoded format support = +;video drc support = + +[source audiotest] +source element = audiotestsrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = is-live=1 +; values below will override the default one of [media source] above +;audio raw format = +;audio samplerate = +;audio channels = +;audio codec = +;audio hw encoder element = +use ulpfec red = no + +[source mic] +source element = pulsesrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = +; values below will override the default one of [media source] above +;audio raw format = +;audio samplerate = +;audio channels = +;audio codec = +;audio hw encoder element = +use ulpfec red = no + +[source mediapacket] +source element = appsrc +source element properties = format=3 + +[rendering sink] +audio sink element = pulsesink +video sink element = tizenwlsink + +; comma separated list of elements, it should be one by one per codec type +audio hw decoder elements = +video hw decoder elements = + diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_player.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_player.ini new file mode 100644 index 0000000..be4adf8 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_player.ini @@ -0,0 +1,102 @@ +[general] + +disable segtrap = yes ; same effect with --gst-disable-segtrap + +; set default videosink element according to video surface type(X, EVAS, NULL) +videosink element overlay = tizenwlsink +videosink element fake = fakesink +video converter element = + +; decoder element keyword for resource management. +video codec element hw = v4l2 +video codec element sw = avdec +video codec default type = sw ; hw or sw + +audio codec element hw = +audio codec element sw = avdec +audio codec default type = sw ; hw or sw + +; support with HW audio codec +support audio effect = no +support pcm exporting = no +support pitch control = no +support replaygain control = no + +audiosink element = pulsesink + +; audio offload information +audio offload sink element = +audio offload device type = ; builtin-speaker,bt-a2dp,audio-jack,usb-audio from pulse stream-map +audio offload media format = ; Use the format keyword of media_format_mimetype_e, MAX:10 + +; supported input format of external media source stream +; Use the format keyword of media_format_mimetype_e, MAX:10 +media stream input format = AAC,H264_SP,H264_MP,H264_HP + +; if yes. gstreamer will not update registry +skip rescan = yes +delay before repeat = 50 ; msec + +; comma separated list of tocken which elemnts has it in it's name will not be used +; this works if 'use decodebin = yes' +element exclude keyword = omx + +; comma separated list of tocken +; this works if 'use decodebin = yes' +unsupported codec keyword = divx + +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=*:2) +gstparam1 = --gst-debug=*:2 +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; generating dot file representing pipeline state +; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/" +generate dot = no + +; parameter is for only video to be determined +; which clock will be used +; if yes, system clock will be used +; apart from this, audiosink is clock provider for audio +use system clock = yes + +; allowed timeout for changing pipeline state +live state change timeout = 30 ; sec +localplayback state change timeout = 10 ; sec + +; delay in msec for sending EOS +eos delay = 0 ; msec + +; extracted pcm buffer size +pcm buffer size = 51200 ; 50Kbytes + +; max num of bo for sw codec +video bo max = 10 + +; video bo timeout (sec) +video bo timeout = 10 + +; setup pipeline with decodebin2 +use decodebin = no + +[http streaming] + +httpsrc element = souphttpsrc + +http buffering limit = 99.0 ; percent + +; if yes, use file for buffering. +; if no, use memory for buffering. +http use file buffer = no + +; ring buffer size when use mem buffer +http ring buffer size = 20971520 ; 20MBytes + +http max size bytes = 1048576 ; bytes + +http buffering time = 1.2 + +http timeout = 30 ; sec diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_player_audio_effect.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_player_audio_effect.ini new file mode 100644 index 0000000..1394608 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_player_audio_effect.ini @@ -0,0 +1,17 @@ +[audio effect] +; name of audio effect element +audio effect element = audioeq + +; preset audio effect setting +audio effect preset = no + +; custom audio effect setting (EQ/extension) +audio effect custom = yes +audio effect custom list = 0 + +audio effect custom eq band num = 7 ; number of EQ bands +audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz) +audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz) + +audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect) +audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect) diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_resource_manager.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_resource_manager.ini new file mode 100644 index 0000000..082f297 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_resource_manager.ini @@ -0,0 +1,9 @@ +[max volume] +video_overlay = -1 +video_decoder = -1 +video_encoder = -1 +camera = -1 + +[priority] +media = 10 +interrupt = 99 diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_streamrecorder.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_streamrecorder.ini new file mode 100644 index 0000000..7c12c66 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_streamrecorder.ini @@ -0,0 +1,81 @@ +[general] +;is encsink source is live +encscink source is live = 0 + +retrialcount = 10 + +minimum frame = 5 + +reset pause time = 0 + +screen record = 1 + +convert output buffer num = 6 + +hw encoder supported = 0 ; 1 if supported and 'video codec element hw' should be formed. + +video codec element hw = ; sprd (if verified) or verified hw codec element + +[encodebin] +;MM_STREAMRECORDER_ENCBIN_PROFILE_VIDEO = 0 MM_STREAMRECORDER_ENCBIN_PROFILE_AUDIO = 1 +;MM_STREAMRECORDER_ENCBIN_PROFILE_IMAGE = 2 MM_STREAMRECORDER_ENCBIN_PROFILE_NUM = 3 +encsink bin profile = 0 + +encsink bin auto audio resample = 0 + +encsink bin auto colorspace = 1 + +encsink bin auto audio convert = 1 + +encsink bin use video toggle = 0 + +[pipeline] +encsink bin source = appsrc + +name of audio src = pulsesrc + +h264 encoder = + +h263 encoder = avenc_h263p + +mpeg4 encoder = avenc_mpeg4 + +name of audio encoder = avenc_aac + +use parser = + +name of 3GP muxer = gppmux + +name of MP4 muxer = mp4mux + +name of video converter = videoconvert + +name of sink = filesink + +[video param] +;/*ms*/ +video frame wait time = 200000 + +[audio param] +audio frame minimum space = 102400 + +audio frame wait time = 20000 + +[attribute] +supported height = 1080,720,480,240,288,144 + +supported width = 1920,1280,640,320,352,176 + +;/*AMR, AAC, VORBIS ,PCM*/ +supported audio encoders = AMR,AAC,PCM + +;/* H263 , H264 , MPEG4 */ +supported video encoders = H263,MPEG4 + +;/*3GP , AMR, MP4 , WAV, ADTS*/ +supported file formats = 3GP,MP4,AMR,ADTS,WAV + +[debug] +; generating dot file representing pipeline state +; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell (also do export to '/etc/profile.d/mmf.sh') +generate dot = no diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_webrtc.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_webrtc.ini new file mode 100644 index 0000000..567bfb2 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_webrtc.ini @@ -0,0 +1,172 @@ +[general] +; generating dot file representing pipeline state +generate dot = no +dot path = /tmp + +; the period(sec) of printing stats logs (0 to disable it) +stats log period = 0 + +; enable verbose logging +verbose log = no + +; enable nice verbose logging +nice verbose = no + +; enable network simulator +network simulator = no + +; dump streams into files +dump incoming streams = no +dump path = /tmp + +; | separated list of arguments that will pass to gst_init +gstreamer arguments = --gst-debug=webrtc*:7,3 + +; comma separated list of elements that will not use in the gstreamer pipeline +gstreamer excluded elements = + +; latency of RTP jitterbuffer +rtp jitterbuffer latency = 100 + +; SDP bundle policy (0:none, 1:balanced(not supported yet), 2:max compat(not supported yet), 3:max bundle) +bundle policy = 3 + +; default STUN server URL +;stun server = stun://stun.l.google.com:19302 + +; enable to conceal private IP address in ICE candidate +conceal private ip = no + + +[media source] +; default values for video source pipeline (e.g, videotest, camera, screen) +video raw format = I420 +video width = 320 +video height = 240 +video framerate = 30 +; comma separated list of default supported video codecs, the first one is default value. +video codecs = vp8,vp9 +video hw encoder element = +video encoded format support = no +video drc support = no +; default values for audio source pipeline (e.g, audiotest, mic) +audio raw format = S16LE +audio samplerate = 8000 +audio channels = 1 +; comma separated list of default supported audio codecs, the first one is default value. +audio codecs = opus,pcmu,pcma +audio hw encoder element = +; default FEC setting of RTP packets +use ulpfec red = no +fec percentage = 100 +; default in-band FEC setting (only supported by opusenc/opusdec) +use inbandfec = no +packet loss percentage = 10 + + +[source videotest] +source element = videotestsrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = is-live=1,pattern=18 +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codecs = +;video hw encoder element = +;video encoded format support = +video drc support = yes +use ulpfec red = yes + + +[source camera] +source element = v4l2src +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codecs = +;video hw encoder element = +;video encoded format support = +;video drc support = +use ulpfec red = yes + + +[source screen] +source element = waylandsrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codecs = +;video hw encoder element = +;video encoded format support = +;video drc support = +use ulpfec red = yes + + +[source audiotest] +source element = audiotestsrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = is-live=1 +; values below will override the default one of [media source] above +;audio raw format = +;audio samplerate = +;audio channels = +;audio codecs = +;audio hw encoder element = +use inbandfec = yes + + +[source mic] +source element = pulsesrc +; comma separated list of 'property-name=value' that will be set to the source element +source element properties = +; values below will override the default one of [media source] above +;audio raw format = +;audio samplerate = +;audio channels = +;audio codecs = +;audio hw encoder element = +use inbandfec = yes + + +[source null] +audio codecs = opus,pcmu,pcma +video codecs = vp8,vp9,h264 + + +[rendering sink] +audio sink element = pulsesink +video sink element = tizenwlsink + +; comma separated list of elements, it should be one by one per codec type +audio hw decoder elements = +video hw decoder elements = + +evas native surface tbm format = I420 + + +[resource acquisition] +camera = yes +video encoder = no +video decoder = no +video overlay = no + + +[vpxenc params] +;threads = +;end usage = +;cpu used = +;target bitrate = +;keyframe max dist = +;min quantizer = +;max quantizer = +;undershoot = diff --git a/media-config-target-vf2/hal/etc/multimedia/mmfw_wfd_sink.ini b/media-config-target-vf2/hal/etc/multimedia/mmfw_wfd_sink.ini new file mode 100644 index 0000000..9981dec --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mmfw_wfd_sink.ini @@ -0,0 +1,231 @@ +[general] +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=2,*wfd*:5) +gstparam1 = --gst-debug=2,*wfd*:5,*wfdtsdemux:1,*wfdrtpbuffer:1 +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; allowed timeout for changing pipeline state +state change timeout = 5; sec + +; 0: default value set by wfdrtspsrc element, other: user define value. +jitter buffer latency=10 + +; for retransmission request enable = yes, disable = no +enable retransmission = no + +; for reset basetime, enable = yes, disable = no +enable reset basetime = yes + +; Maximum number of nanoseconds that a buffer can be late before it is dropped by videosink (-1 unlimited) +video sink max lateness=20000000 + +; nanoseconds to be added to buffertimestamp by sink elements +sink ts offset=250000000 + +; if no, go asynchronously to PAUSED without preroll +audio sink async=no + +; if no, go asynchronously to PAUSED without preroll +video sink async=no + +; user agent +user agent = + +[debug] +; generating dot file representing pipeline state +; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell +generate dot = no + +; set property to wfdsrc plugin for dumping rtsp message +dump rtsp message = yes + +; enable tracing buffers using pad probe +trace buffers = no + +; enable tracing first buffer +trace first buffer = no + +; enable tracing buffers of wfdsrc +trace buffers of wfdsrc = no + +; enable dumping ts data (eg. /var/tmp/*.ts) +dump ts data = no + +; enable dumping rtp data (eg. /var/tmp/screenmirroring_sink_rtp.dump) +dump rtp data = no + + +[pipeline] +wfdsrc element = wfdsrc + +tsdemux element = wfdtsdemux + +audio hdcp element = + +aac parser element = aacparse + +aac decoder element = avdec_aac + +ac3 parser element = ac3parse + +ac3 decoder element = + +lpcm converter element = + +lpcm filter element = capsfilter + +audio resampler element = audioconvert + +audio volume element = + +audio sinkbin queue element = ;queue + +audio sink element = pulsesink + +video hdcp element = + +video h264 parser element = h264parse + +video h265 parser element = + +video h264 decoder element = avdec_h264 + +video h265 decoder element = + +video converter element = videoconvert + +video filter element = + +video sink element = tizenwlsink + +video evas sink element = evaspixmapsink + + +[wfd audio codecs] +; 0x1: LPCM, 0x2: AAC, 0x4: AC3 +;default aac and LPCM +audio codec=0x3 + +audio latency=0x0 + +;0x1 : 48000khz, 0x2: 44100khz +audio sampling frequency=0x3 + +; 0x1:2 channels, 0x2:4 channels, 0x4:6channels, 0x8:8channels +audio channels=0x1 + + +[wfd video formats] +; 0x0:not support, 0x1:H264 +video codec=0x1 + +; 0x0:not supoort, 0x1: CHP, 0x2:CBP +video profile=0x1 + +video native resolution = 0x20 + +video cea support=0x84ab;0x194ab + +video vesa support=0x1;0x5555555 + +video hh support=0x555 + +; 0x1:base, 0x2:high +video profile=0x1 + +; 0x1:level_3_1, 0x2:level_3_2, 0x4:level_4, 0x8:level_4_1, 0x10:level_4_2 +video level=0x2 + +video latency=0x0 + +video vertical resolution=720 + +video horizontal resolution=1280 + +video minimum slicesize=0 + +video slice encoding params=200 + +video framerate control support=11 + + +[wfd hdcp content protection] +enable hdcp = no + +;0x0:none, 0x1:HDCP_2.0, 0x2:HDCP_2.1 +hdcp content protection=0x0 + +hdcp port no=0 + + +[wfd2 video formats] +;0x0:not support, 0x1:H264, 0x2:H265, 0x3:both +video codec=0x3 + +video native resolution = 0x20 + +video non transcoding support=1 + +[wfd2 h264 video format] +video cea support=0x194ab + +video vesa support=0x5555555 + +video hh support=0x555 + +video profile=0x1 + +video level=0x2 + +video latency=0x0 + +video vertical resolution=1080 + +video horizontal resolution=1920 + +video minimum slicesize=0 + +video slice encoding params=200 + +video framerate control support=0 + +[wfd2 h265 video format] +video cea support=394ab + +video vesa support=5555555 + +video hh support=555 + +; 0x1:WFD_H265_MAIN_PROFILE +video profile=0x1 + +; 0x1:WFD_H265_LEVEL_3_1 +video level=0x2 + +video latency=0x0 + +video vertical resolution=2360 + +video horizontal resolution=3840 + +video minimum slicesize=0 + +video slice encoding params=200 + +video framerate control support=0 + +[wfd2 audio codecs] +; 0x1: LPCM, 0x2: AAC, 0x4: AC3 +;default aac and LPCM +audio codec=0x3 + +;see mm_wfd_sink_wfd_enum.h +audio lpcm mode=0x3 + +audio aac mode=0x1 + +audio ac3 mode=0x1 + diff --git a/media-config-target-vf2/hal/etc/multimedia/mused.conf b/media-config-target-vf2/hal/etc/multimedia/mused.conf new file mode 100644 index 0000000..38e07b8 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/mused.conf @@ -0,0 +1,66 @@ +[muse] +; The 'hosts' parameter defines the modules, +; which the user would like to connect to the muse. +; If you want to add host, then write manually. +hosts=player, camera, recorder +logfile=/var/log/mused/muse-server +lockfile=/tmp/.muse_core.lock +min_timeout=5 +max_timeout=90 +;100MB=100000 +memory_threshold=100000 +enable_watch_external_storage=1 + +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=*:2) +gstparam1=--gst-debug=*:2 +gstparam2=--gst-disable-segtrap +gstparam3= +gstparam4= +gstparam5= +gstparam6= +gstparam7= +gstparam8= +gstparam9= +gstparam10= + +; gstparam#=--gst-plugin-load=/usr/lib/gstreamer-1.0/libgstcoreelements.so' +; can be substituted with gstpreload=coreelements' +gstpreload= + +[player] +; The 'player' parameter represents the muse-player. +; This module recovers the "capi-media-player". +path=libmuse-player.so +preloaded=no +timeout=60 +disable_watchdog_api=-1 +;unlimited=-1 +max_instance=-1 +caution_instance=-1 + +[camera] +; The 'camera' parameter represents the muse-camera. +; This module recovers the "capi-media-camera". +path=libmuse-camera.so +preloaded=no +timeout=10 +;api 2 is camera_dispatcher_start_preview +disable_watchdog_api=2 +;unlimited=-1 +max_instance=-1 +caution_instance=-1 + +[recorder] +; The 'recorder' parameter represents the muse-recorder. +; This module recovers the "capi-media-recorder". +; This one should be paired with the 'camera' module. +path=libmuse-recorder.so +preloaded=no +timeout=10 +;api 5 is recorder_start +disable_watchdog_api=5 +;unlimited=-1 +max_instance=-1 +caution_instance=-1 + diff --git a/media-config-target-vf2/hal/etc/multimedia/scmirroring_src.ini b/media-config-target-vf2/hal/etc/multimedia/scmirroring_src.ini new file mode 100644 index 0000000..68103c5 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/scmirroring_src.ini @@ -0,0 +1,114 @@ + +[general] + +; set default video source element +; 0: ximagesrc, 1: xvimagesrc, 2: camerasrc, 3: videotestsrc, 4:waylandsrc +videosrc element = 4 + +; set default video encoder element +video encoder element = omxh264enc + +disable segtrap = yes ; same effect with --gst-disable-segtrap + +mtu_size value = 1400 + +video converter element = + +; if yes. gstreamer will not update registry +skip rescan = yes + +; set default audio encoder element +audio encoder aac name = avenc_aac +audio encoder ac3 name = avenc_ac3 + +; set audio codec for source +; according to GstWFDAudioFormat +; 0x1: LPCM, 0x2: AAC, 0x4: AC3 +; default aac and LPCM +audio codec = 0x3 + +; set exynos audiosrc property +; exynosaudio device name = alsa_output.0.analog-stereo.monitor +exynosaudio device name = alsa_output.hw_0_0.monitor +audio properties name = props,media.role=loopback-mirroring + +exynosaudio buffer_time = 200000 +; set qcmsm audiosrc property +qcmsmaudio device name = hw:0,8 +qcmsmaudio buffer_time = 1000 + +audio latency_time = 10000 +audio do_timestamp = 0 + +; set video codec for source +; according to GstWFDVideoFormat +; 0x0: Not supportted, 0x1: H264 +; default H.264 +video codec = 0x1 + +; Video Resolutions supported need to be filled in 32 bits according to WFD spec +video resolution_supported = 0x00000001 + +; Bitrate range for different resolutions +; Resolution Set 1: default +; Resolution Set 2: 1920 x 1080 +; Resolution Set 3: 1280 x 720 +; Resolution Set 4: 960 x 540 +; Resolution Set 5: 854 x 480 +; Resolution Set 6: 640 x 360 +; Resolution Set 7: 720 Remote Touch +; UDP bitrate settings +INIT_UDP_resolution_set_1 = 1048576 +MIN_UDP_resolution_set_1 = 838861 +MAX_UDP_resolution_set_1 = 1572864 + +INIT_UDP_resolution_set_2 = 5242880 +MIN_UDP_resolution_set_2 = 3670016 +MAX_UDP_resolution_set_2 = 6291456 + +INIT_UDP_resolution_set_3 = 2621440 +MIN_UDP_resolution_set_3 = 1572864 +MAX_UDP_resolution_set_3 = 3145728 + +INIT_UDP_resolution_set_4 = 2621440 +MIN_UDP_resolution_set_4 = 1572864 +MAX_UDP_resolution_set_4 = 3145728 + +INIT_UDP_resolution_set_5 = 838861 +MIN_UDP_resolution_set_5 = 314573 +MAX_UDP_resolution_set_5 = 1048576 + +INIT_UDP_resolution_set_6 = 838861 +MIN_UDP_resolution_set_6 = 314573 +MAX_UDP_resolution_set_6 = 838861 + +INIT_UDP_resolution_set_7 = 1572864 +MIN_UDP_resolution_set_7 = 838861 +MAX_UDP_resolution_set_7 = 1572864 + + +; Native resolution supported CEA resolution=0, VESA resolution=1, HH resolution=2 +video native_resolution = 0 + +; HDCP encryption +encryption HDCP_enabled = 1 + +; UIBC Capability +uibc UIBC_GEN_capability = 15 + +; parameters for initializing gstreamer +gstparam1 = +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; generating dot file representing pipeline state +generate dot = no + +; parameter for clock provide in audiosink +provide clock = yes + +;dumping ts stream to file +dump ts = 0 + diff --git a/media-config-target-vf2/hal/etc/multimedia/vision_source.ini b/media-config-target-vf2/hal/etc/multimedia/vision_source.ini new file mode 100644 index 0000000..ed35316 --- /dev/null +++ b/media-config-target-vf2/hal/etc/multimedia/vision_source.ini @@ -0,0 +1,9 @@ +[Common] +name = v4l2 + +[Stream] +dev_id = 0 +width = 640 +height = 480 +fps = 30 +pixel_format = 0 \ No newline at end of file diff --git a/media-config-target-vf2/hal/etc/murphy/murphy.lua b/media-config-target-vf2/hal/etc/murphy/murphy.lua new file mode 100644 index 0000000..9675961 --- /dev/null +++ b/media-config-target-vf2/hal/etc/murphy/murphy.lua @@ -0,0 +1,99 @@ +m = murphy.get() + +-- load the dlog plugin +m:try_load_plugin('dlog') + +-- load the console plugin +-- m:try_load_plugin('console') + +-- load the dbus plugin +-- if m:plugin_exists('dbus') then +-- m:load_plugin('dbus') +-- end + +-- load the native resource plugin +if m:plugin_exists('resource-native') then + m:load_plugin('resource-native') + m:info("native resource plugin loaded") +else + m:info("No native resource plugin found...") +end + +-- load the dbus resource plugin +m:try_load_plugin('resource-dbus', { + dbus_bus = "system", + dbus_service = "org.Murphy", + dbus_track = true, + default_zone = "driver", + default_class = "implicit" +}) + +-- load the domain control plugin +if m:plugin_exists('domain-control') then + m:load_plugin('domain-control') +else + m:info("No domain-control plugin found...") +end + +if m:plugin_exists('glib') then + m:load_plugin('glib') +else + m:info("No glib plugin found...") +end + +-- define application classes +application_class { + name = "interrupt", + priority = 99, + modal = false, + share = false, + order = "fifo" +} + +application_class { + name = "media", + priority = 10, + modal = false, + share = false, + order = "lifo" +} + +-- define zone attributes +zone.attributes { + type = {mdb.string, "common", "rw"}, + location = {mdb.string, "anywhere", "rw"} +} + +-- define zones +zone { + name = "driver", + attributes = { + type = "common", + location = "front-left" + } +} + +-- define resource classes +resource.class { + name = "video_overlay", + shareable = false, + sync_release = true +} + +resource.class { + name = "video_decoder", + shareable = false, + sync_release = true +} + +resource.class { + name = "video_encoder", + shareable = false, + sync_release = true +} + +resource.class { + name = "camera", + shareable = false, + sync_release = true +} diff --git a/media-config-target-vf2/hal/etc/pulse/client.conf b/media-config-target-vf2/hal/etc/pulse/client.conf new file mode 100644 index 0000000..3637b20 --- /dev/null +++ b/media-config-target-vf2/hal/etc/pulse/client.conf @@ -0,0 +1,37 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA. + +## Configuration file for PulseAudio clients. See pulse-client.conf(5) for +## more information. Default values are commented out. Use either ; or # for +## commenting. + +; default-sink = +; default-source = +default-server = /var/run/pulse/native +; default-dbus-server = + +autospawn = no +; daemon-binary = /usr/bin/pulseaudio +; extra-arguments = --log-target=syslog + +; cookie-file = + +enable-shm = no +shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB + +; auto-connect-localhost = no +; auto-connect-display = no diff --git a/media-config-target-vf2/hal/etc/pulse/daemon.conf b/media-config-target-vf2/hal/etc/pulse/daemon.conf new file mode 100644 index 0000000..a25883c --- /dev/null +++ b/media-config-target-vf2/hal/etc/pulse/daemon.conf @@ -0,0 +1,83 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA. + +## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for +## more information. Default values are commented out. Use either ; or # for +## commenting. + +daemonize = yes +; fail = yes +; allow-module-loading = yes +; allow-exit = yes +; use-pid-file = yes +system-instance = yes +; local-server-type = user +; enable-shm = yes +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB +; lock-memory = no +; cpu-limit = no + +; high-priority = yes +; nice-level = -11 + +realtime-scheduling = yes +realtime-priority = 5 + +; exit-idle-time = 20 +; scache-idle-time = 20 + +; dl-search-path = (depends on architecture) + +; load-default-script-file = yes +; default-script-file = /etc/pulse/default.pa + +log-target = dlog +log-level = info +; log-meta = no +; log-time = no +; log-backtrace = 0 + +resample-method = speex-fixed-3 +; enable-remixing = yes +; enable-lfe-remixing = no + +flat-volumes = no + +; rlimit-fsize = -1 +; rlimit-data = -1 +; rlimit-stack = -1 +; rlimit-core = -1 +; rlimit-as = -1 +; rlimit-rss = -1 +; rlimit-nproc = -1 +; rlimit-nofile = 256 +; rlimit-memlock = -1 +; rlimit-locks = -1 +; rlimit-sigpending = -1 +; rlimit-msgqueue = -1 +; rlimit-nice = 31 +; rlimit-rtprio = 9 +; rlimit-rttime = 200000 + +; default-sample-format = s16le +; default-sample-rate = 44100 +alternate-sample-rate = 44100 +; default-sample-channels = 2 +; default-channel-map = front-left,front-right + +; default-fragments = 4 +; default-fragment-size-msec = 25 diff --git a/media-config-target-vf2/hal/etc/pulse/default.pa b/media-config-target-vf2/hal/etc/pulse/default.pa new file mode 100644 index 0000000..ef8f114 --- /dev/null +++ b/media-config-target-vf2/hal/etc/pulse/default.pa @@ -0,0 +1,149 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +# This startup script is used only if PulseAudio is started per-user +# (i.e. not in system mode) + +.nofail + +### Load something into the sample cache +#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav + +.fail + +### Automatically restore the volume of streams and devices +load-module module-device-restore +load-module module-stream-restore +load-module module-card-restore + +### Automatically augment property information from .desktop files +### stored in /usr/share/application +load-module module-augment-properties + +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) +#load-module module-alsa-sink +#load-module module-alsa-source device=hw:1,0 +#load-module module-null-sink +#load-module module-pipe-sink + +### Automatically load driver modules depending on the hardware available +.ifexists module-udev-detect.so +load-module module-udev-detect +.else +### Use the static hardware detection module (for systems that lack udev support) +load-module module-detect +.endif + +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect channels=2 +.fail +.endif + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + +### Load several protocols +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Network access (may be configured with paprefs, so leave this commented +### here if you plan to use paprefs) +#load-module module-esound-protocol-tcp +#load-module module-native-protocol-tcp + +### Load the RTP receiver module (also configured via paprefs, see above) +#load-module module-rtp-recv + +### Load the RTP sender module (also configured via paprefs, see above) +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" +#load-module module-rtp-send source=rtp.monitor + +### Load additional modules from GConf settings. This can be configured with the paprefs tool. +### Please keep in mind that the modules configured by paprefs might conflict with manually +### loaded modules. +.ifexists module-gconf.so +.nofail +load-module module-gconf +.fail +.endif + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Honour intended role device property +load-module module-intended-roles + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### If autoexit on idle is enabled we want to make sure we only quit +### when no local session needs us anymore. +.ifexists module-console-kit.so +load-module module-console-kit +.endif +.ifexists module-systemd-login.so +load-module module-systemd-login +.endif + +### Enable positioned event sounds +load-module module-position-event-sounds + +### Cork music/video streams when a phone stream is active +load-module module-role-cork + +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Load DBus protocol +.ifexists module-dbus-protocol.so +load-module module-dbus-protocol +.endif + + +load-module module-switch-on-port-available + +### Make some devices default +#set-default-sink output +#set-default-source input diff --git a/media-config-target-vf2/hal/etc/pulse/device-map.json b/media-config-target-vf2/hal/etc/pulse/device-map.json new file mode 100644 index 0000000..95aa348 --- /dev/null +++ b/media-config-target-vf2/hal/etc/pulse/device-map.json @@ -0,0 +1,26 @@ +{ + "device-types":[ + { + "device-type":"builtin-speaker", + "playback-devices":{"normal":"tizen2:0,0"} + }, + { + "device-type":"builtin-mic", + "capture-devices":{"normal":"tizen:0,0"} + } + ], + "device-files":{ + "playback-devices":[ + { + "device-string":"tizen2:0,0", + "role":{"normal":"rate=48000 fragment_size=4800 fragments=4"} + } + ], + "capture-devices":[ + { + "device-string":"tizen:0,0", + "role":{"normal":"rate=48000 channels=2 fragment_size=4800 fragments=4"} + } + ] + } +} diff --git a/media-config-target-vf2/hal/etc/pulse/stream-map.json b/media-config-target-vf2/hal/etc/pulse/stream-map.json new file mode 100644 index 0000000..164e49c --- /dev/null +++ b/media-config-target-vf2/hal/etc/pulse/stream-map.json @@ -0,0 +1,191 @@ +{ + "latencies":[ + { + "type":"low", + "fragsize-ms":25, + "minreq-ms":-1, + "tlength-ms":100, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"mid", + "fragsize-ms":50, + "minreq-ms":-1, + "tlength-ms":200, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"high", + "fragsize-ms":75, + "minreq-ms":-1, + "tlength-ms":400, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"voip", + "fragsize-ms":20, + "minreq-ms":20, + "tlength-ms":100, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"default", + "fragsize-ms":50, + "minreq-ms":-1, + "tlength-ms":200, + "prebuf-ms":-1, + "maxlength":-1 + }, + { + "type":"default-async", + "fragsize-ms":50, + "minreq-ms":20, + "tlength-ms":200, + "prebuf-ms":0, + "maxlength":-1 + }, + ], + "volumes":[ + { + "type":"master", + "is-hal-volume":1 + }, + { + "type":"media", + "is-hal-volume":0 + }, + { + "type":"system", + "is-hal-volume":0 + }, + { + "type":"alarm", + "is-hal-volume":0 + }, + { + "type":"notification", + "is-hal-volume":0 + }, + { + "type":"voice", + "is-hal-volume":0 + }, + { + "type":"ringtone", + "is-hal-volume":0 + }, + { + "type":"voip", + "is-hal-volume":0 + }, + { + "type":"call", + "is-hal-volume":1 + } + ], + "streams":[ + { + "role":"media", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"media"}, + "avail-in-devices":["usb-audio","network"], + "avail-out-devices":["bt-a2dp","usb-audio","network","builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"] + }, + { + "role":"system", + "priority" : 2, + "route-type" : "auto", + "volume-types":{"in":"none","out":"system"}, + "avail-in-devices":["none"], + "avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"alarm", + "priority" : 4, + "route-type" : "auto-all", + "volume-types":{"in":"none","out":"alarm"}, + "avail-in-devices":["none"], + "avail-out-devices":["builtin-speaker","bt-a2dp","usb-audio"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"notification", + "priority" : 4, + "route-type" : "auto-all", + "volume-types":{"in":"none","out":"notification"}, + "avail-in-devices":["none"], + "avail-out-devices":["builtin-speaker","bt-a2dp","usb-audio"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"emergency", + "priority" : 4, + "route-type" : "auto", + "volume-types":{"in":"none","out":"none"}, + "avail-in-devices":["none"], + "avail-out-devices":["builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"voice-information", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"voice"}, + "avail-in-devices":["none"], + "avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"voice-recognition", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"none"}, + "avail-in-devices":["usb-audio"], + "avail-out-devices":["none"], + "avail-frameworks":["audio-io","webrtc"] + }, + { + "role":"voice-recognition-service", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"none"}, + "avail-in-devices":["usb-audio"], + "avail-out-devices":["none"], + "avail-frameworks":["audio-io"] + }, + { + "role":"ringtone-voip", + "priority" : 5, + "route-type" : "auto-all", + "volume-types":{"in":"none","out":"ringtone"}, + "avail-in-devices":["none"], + "avail-out-devices":["bt-a2dp","builtin-speaker","usb-audio"], + "avail-frameworks":["player","wav-player","tone-player","audio-io","sound-manager"] + }, + { + "role":"voip", + "priority" : 5, + "route-type" : "manual", + "volume-types":{"in":"none","out":"voip"}, + "avail-in-devices":["usb-audio"], + "avail-out-devices":["builtin-speaker","usb-audio"], + "avail-frameworks":["audio-io","tone-player","sound-manager","webrtc"] + }, + { + "role":"ext-media", + "priority" : 3, + "route-type" : "manual-ext", + "volume-types":{"in":"none","out":"media"}, + "avail-in-devices":["usb-audio","network"], + "avail-out-devices":["bt-a2dp","usb-audio","network"], + "avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"] + }, + ] +} diff --git a/media-config-target-vf2/hal/etc/pulse/system.pa b/media-config-target-vf2/hal/etc/pulse/system.pa new file mode 100644 index 0000000..780d446 --- /dev/null +++ b/media-config-target-vf2/hal/etc/pulse/system.pa @@ -0,0 +1,74 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +# This startup script is used only if PulseAudio is started in system +# mode. + +### Automatically load driver modules depending on the hardware available +### Load several protocols +load-module module-native-protocol-unix auth-anonymous=1 + +### Load module-tizenaudio-policy +load-module module-tizenaudio-policy + +#.ifexists module-udev-detect.so +load-module module-udev-detect +#.endif + +### Sound Player module +load-module module-sound-player +load-module module-tone-player +load-module module-role-ducking global=1 trigger_roles=solo/notification,voice-information ducking_roles=media,system,alarm,notification,voice-information,ext-media/media,ext-media volume=0%/25% fade_in=0/1000 fade_out=0/1000 + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + + +### Automatically restore the volume of streams and devices +#load-module module-stream-restore +#load-module module-device-restore + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +.ifexists module-dbus-protocol.so +### If you want to allow TCP connections, set access to "remote" or "local,remote". +load-module module-dbus-protocol access=local +.endif + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +#load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle timeout=1 + +load-sample-lazy camera-shutter-01 /usr/share/sounds/mm-camcorder/capture_shutter_01.ogg +load-sample-lazy camera-shutter-02 /usr/share/sounds/mm-camcorder/capture_shutter_02.ogg +load-sample-lazy recording-start /usr/share/sounds/mm-camcorder/recording_start_01.ogg +load-sample-lazy recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.ogg diff --git a/media-config-target-vf2/hal/etc/vision/depth/backend_path.ini b/media-config-target-vf2/hal/etc/vision/depth/backend_path.ini new file mode 100644 index 0000000..702ed30 --- /dev/null +++ b/media-config-target-vf2/hal/etc/vision/depth/backend_path.ini @@ -0,0 +1,6 @@ +; This ini file describes which DFS backend is used. +; Available DFS backends : OPENCV, QCMV + +[DFS backend] +; Writing rule = [opencv|qcmv] +type = opencv diff --git a/media-config-target-vf2/hal/etc/xdg/gstomx.conf b/media-config-target-vf2/hal/etc/xdg/gstomx.conf new file mode 100644 index 0000000..7a92953 --- /dev/null +++ b/media-config-target-vf2/hal/etc/xdg/gstomx.conf @@ -0,0 +1,84 @@ +[omxmpeg2videodec] +type-name=GstOMXMPEG2VideoDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxmpeg4videodec] +type-name=GstOMXMPEG4VideoDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxh263dec] +type-name=GstOMXH263Dec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxh264dec] +type-name=GstOMXH264Dec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxmjpegdec] +type-name=GstOMXMJPEGDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxvc1dec] +type-name=GstOMXWMVDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role +sink-template-caps=video/x-wmv,wmvversion=(int)3,format=(string){WMV3,WVC1},width=(int)[1,MAX],height=(int)[1,MAX] + +[omxh264enc] +type-name=GstOMXH264Enc +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_encode +rank=257 +in-port-index=200 +out-port-index=201 +hacks=no-component-role + +[omxanalogaudiosink] +type-name=GstOMXAnalogAudioSink +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.audio_render +rank=257 +in-port-index=100 +out-port-index=101 +hacks=no-component-role +sink-template-caps=audio/x-raw,format=(string){S16LE,S32LE},layout=(string)interleaved,rate=(int){8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000},channels=(int)[1,2] + +[omxhdmiaudiosink] +type-name=GstOMXHdmiAudioSink +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.audio_render +rank=258 +in-port-index=100 +out-port-index=101 +hacks=no-component-role +sink-template-caps=audio/x-raw,format=(string){S16LE,S32LE},layout=(string)interleaved,rate=(int){8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000},channels=(int)[1,8];audio/x-ac3,framed=(boolean)true;audio/x-dts,framed=(boolean)true,block-size=(int){512,1024,2048} + diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf new file mode 100644 index 0000000..47e22c5 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf @@ -0,0 +1,65 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where an 'Aux' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 80 +description-key = analog-input + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf new file mode 100644 index 0000000..96861e7 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf @@ -0,0 +1,104 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Dock Mic' or 'Dock Mic Boost' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 78 +description-key = analog-input-microphone-dock + +[Jack Dock Mic] +required-any = any + +[Jack Dock Mic Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Dock Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Dock Mic Boost:on] +name = input-boost-on + +[Option Dock Mic Boost:off] +name = input-boost-off + +[Element Dock Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Dock Mic] +name = analog-input-microphone-dock +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Dock Mic] +name = analog-input-microphone-dock +required-any = any + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Front Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf new file mode 100644 index 0000000..d3501a8 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf @@ -0,0 +1,65 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where an 'FM' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 70 +description-key = analog-input-radio + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +.include analog-input.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf new file mode 100644 index 0000000..6e7775c --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf @@ -0,0 +1,104 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Front Mic' or 'Front Mic Boost' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 85 +description-key = analog-input-microphone-front + +[Jack Front Mic] +required-any = any + +[Jack Front Mic Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Front Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Front Mic Boost:on] +name = input-boost-on + +[Option Front Mic Boost:off] +name = input-boost-off + +[Element Front Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Front Mic] +name = analog-input-microphone-front +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Front Mic] +name = analog-input-microphone-front +required-any = any + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Mic Boost] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf new file mode 100644 index 0000000..eb5740a --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf @@ -0,0 +1,102 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For some ASUS netbooks that have one jack that can be either a Headphone +; *or* a mic. This path will be active only when it is used as a mic. +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 87 +description-key = analog-input-microphone + +[Jack Headphone Mic] +required-any = any +state.plugged = unknown + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headphone Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headphone Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Headphone Mic] +name = analog-input-microphone +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Headphone Mic] +name = analog-input-microphone +required-any = any + +; Make sure the internal speakers are not auto-muted when you plug a mic in +[Element Auto-Mute Mode] +enumeration = select + +[Option Auto-Mute Mode:Disabled] +name = analog-input-microphone + +[Element Front Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf new file mode 100644 index 0000000..579db6b --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf @@ -0,0 +1,114 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Headset Mic' or 'Headset Mic Boost' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 88 +description-key = analog-input-microphone-headset + +[Jack Headset Mic] +required-any = any + +[Jack Headset Mic Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Headphone] +state.plugged = unknown + +[Jack Front Headphone] +state.plugged = unknown + +[Jack Headphone Mic] +state.plugged = unknown + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headset Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headset Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headset] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Headset Mic] +name = Headset Microphone +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Headset Mic] +name = Headset Microphone +required-any = any + +[Element Front Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf new file mode 100644 index 0000000..9e22008 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf @@ -0,0 +1,133 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists +; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38 +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 89 +description-key = analog-input-microphone-internal + +[Jack Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Dock Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Front Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Rear Mic] +state.plugged = no +state.unplugged = unknown + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Internal Mic Boost] +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Internal Mic Boost:on] +name = input-boost-on + +[Option Internal Mic Boost:off] +name = input-boost-off + +[Element Int Mic Boost] +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Int Mic Boost:on] +name = input-boost-on + +[Option Int Mic Boost:off] +name = input-boost-off + +[Element Internal Mic] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Int Mic] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Internal Mic] +name = analog-input-microphone-internal + +[Option Input Source:Int Mic] +name = analog-input-microphone-internal + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Internal Mic] +name = analog-input-microphone-internal + +[Option Capture Source:Int Mic] +name = analog-input-microphone-internal + +[Element Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Front Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Mic Boost] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf new file mode 100644 index 0000000..898410a --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf @@ -0,0 +1,154 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists +; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38 +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 89 +description-key = analog-input-microphone-internal + +[Jack Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Dock Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Front Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Rear Mic] +state.plugged = no +state.unplugged = unknown + +[Jack Internal Mic Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Internal Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Internal Mic Boost:on] +name = input-boost-on + +[Option Internal Mic Boost:off] +name = input-boost-off + +[Element Int Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Int Mic Boost:on] +name = input-boost-on + +[Option Int Mic Boost:off] +name = input-boost-off + +[Element Internal Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Int Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Internal Mic] +name = analog-input-microphone-internal +required-any = any + +[Option Input Source:Int Mic] +name = analog-input-microphone-internal +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Internal Mic] +name = analog-input-microphone-internal +required-any = any + +[Option Capture Source:Int Mic] +name = analog-input-microphone-internal +required-any = any + +[Element Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Front Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Headphone Mic] +switch = off +volume = off + +[Element Headphone Mic Boost] +switch = off +volume = off + +[Element Mic Boost] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf new file mode 100644 index 0000000..cf20790 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf @@ -0,0 +1,144 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Line' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 81 + +[Jack Line] +required-any = any + +[Jack Line Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Jack Line - Input] +required-any = any + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Line Boost] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Line] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Line] +name = analog-input-linein +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Line] +name = analog-input-linein +required-any = any + +[Element PCM Capture Source] +enumeration = select + +[Option PCM Capture Source:Line] +name = analog-input-linein +required-any = any + +[Option PCM Capture Source:Line In] +name = analog-input-linein +required-any = any + +[Element Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Front Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Mic Boost] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +[Element Mic Jack Mode] +enumeration = select + +[Option Mic Jack Mode:Line In] +priority = 19 +name = input-linein diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf new file mode 100644 index 0000000..7147d20 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf @@ -0,0 +1,66 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Mic/Line' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 85 +description-key = analog-input + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf new file mode 100644 index 0000000..53c03c8 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf @@ -0,0 +1,141 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Mic' or 'Mic Boost' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 87 +description-key = analog-input-microphone + +[Jack Mic] +required-any = any + +[Jack Mic Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Jack Mic - Input] +required-any = any + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Mic Boost:on] +name = input-boost-on + +[Option Mic Boost:off] +name = input-boost-off + +[Element Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Mic] +name = analog-input-microphone +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Mic] +name = analog-input-microphone +required-any = any + +[Element PCM Capture Source] +enumeration = select + +[Option PCM Capture Source:Mic] +name = analog-input-microphone +required-any = any + +[Option PCM Capture Source:Mic-In/Mic Array] +name = analog-input-microphone +required-any = any + +;;; Some AC'97s have "Mic Select" and "Mic Boost (+20dB)" + +[Element Mic Select] +enumeration = select + +[Option Mic Select:Mic1] +name = input-microphone +priority = 20 + +[Option Mic Select:Mic2] +name = input-microphone +priority = 19 + +[Element Mic Boost (+20dB)] +switch = select +volume = merge + +[Option Mic Boost (+20dB):on] +name = input-boost-on + +[Option Mic Boost (+20dB):off] +name = input-boost-off + +[Element Front Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Rear Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +[Element Rear Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common new file mode 100644 index 0000000..e5ced21 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common @@ -0,0 +1,60 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Common element for all microphone inputs +; +; See analog-output.conf.common for an explanation on the directives + +[Properties] +device.icon_name = audio-input-microphone + +[Element Line] +switch = off +volume = off + +[Element Line Boost] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +[Element Inverted Internal Mic] +switch = off +volume = off + +[Element Mic Jack Mode] +enumeration = select + +[Option Mic Jack Mode:Mic In] +priority = 19 +name = input-microphone diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf new file mode 100644 index 0000000..7136193 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf @@ -0,0 +1,104 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Rear Mic' or 'Rear Mic Boost' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 82 +description-key = analog-input-microphone-rear + +[Jack Rear Mic] +required-any = any + +[Jack Rear Mic Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Rear Mic Boost] +required-any = any +switch = select +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Option Rear Mic Boost:on] +name = input-boost-on + +[Option Rear Mic Boost:off] +name = input-boost-off + +[Element Rear Mic] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Input Source] +enumeration = select + +[Option Input Source:Rear Mic] +name = analog-input-microphone-rear +required-any = any + +[Element Capture Source] +enumeration = select + +[Option Capture Source:Rear Mic] +name = analog-input-microphone-rear +required-any = any + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Front Mic] +switch = off +volume = off + +[Element Dock Mic] +switch = off +volume = off + +[Element Mic Boost] +switch = off +volume = off + +[Element Dock Mic Boost] +switch = off +volume = off + +[Element Internal Mic Boost] +switch = off +volume = off + +[Element Front Mic Boost] +switch = off +volume = off + +.include analog-input-mic.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf new file mode 100644 index 0000000..99d1d79 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf @@ -0,0 +1,65 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'TV Tuner' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 70 +description-key = analog-input-video + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf new file mode 100644 index 0000000..50c999e --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf @@ -0,0 +1,64 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; For devices where a 'Video' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 70 + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Internal Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf new file mode 100644 index 0000000..c9db677 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf @@ -0,0 +1,102 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; A fallback for devices that lack separate Mic/Line/Aux/Video/TV +; Tuner/FM elements +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 100 + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +required-absent = any + +[Element Mic Boost] +required-absent = any + +[Element Dock Mic] +required-absent = any + +[Element Dock Mic Boost] +required-absent = any + +[Element Front Mic] +required-absent = any + +[Element Front Mic Boost] +required-absent = any + +[Element Int Mic] +required-absent = any + +[Element Int Mic Boost] +required-absent = any + +[Element Internal Mic] +required-absent = any + +[Element Internal Mic Boost] +required-absent = any + +[Element Rear Mic] +required-absent = any + +[Element Rear Mic Boost] +required-absent = any + +[Element Headset] +required-absent = any + +[Element Headset Mic] +required-absent = any + +[Element Headset Mic Boost] +required-absent = any + +[Element Headphone Mic] +required-absent = any + +[Element Headphone Mic Boost] +required-absent = any + +[Element Line] +required-absent = any + +[Element Line Boost] +required-absent = any + +[Element Aux] +required-absent = any + +[Element Video] +required-absent = any + +[Element Mic/Line] +required-absent = any + +[Element TV Tuner] +required-absent = any + +[Element FM] +required-absent = any + +.include analog-input.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common new file mode 100644 index 0000000..201087e --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common @@ -0,0 +1,289 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Mixer path for PulseAudio's ALSA backend, common elements for all +; input paths. If multiple options by the same id are discovered they +; will be suffixed with a number to distinguish them, in the same +; order they appear here. +; +; Source selection should use the following names: +; +; input -- If we don't know the exact kind of input +; input-microphone +; input-microphone-internal +; input-microphone-external +; input-linein +; input-video +; input-radio +; input-docking-microphone +; input-docking-linein +; input-docking +; +; We explicitly don't want to wrap the following sources: +; +; CD +; Synth/MIDI +; Phone +; Mix +; Digital/SPDIF +; Master +; PC Speaker +; +; See analog-output.conf.common for an explanation on the directives + +;;; 'Input Source Select' + +[Element Input Source Select] +enumeration = select + +[Option Input Source Select:Input1] +name = input +priority = 10 + +[Option Input Source Select:Input2] +name = input +priority = 5 + +;;; 'Input Source' + +[Element Input Source] +enumeration = select + +[Option Input Source:Digital Mic] +name = input-microphone +priority = 20 + +[Option Input Source:Microphone] +name = input-microphone +priority = 20 + +[Option Input Source:Front Microphone] +name = input-microphone +priority = 19 + +[Option Input Source:Internal Mic 1] +name = input-microphone +priority = 19 + +[Option Input Source:Line-In] +name = input-linein +priority = 18 + +[Option Input Source:Line In] +name = input-linein +priority = 18 + +[Option Input Source:Docking-Station] +name = input-docking +priority = 17 + +[Option Input Source:AUX IN] +name = input +priority = 10 + +;;; 'Capture Source' + +[Element Capture Source] +enumeration = select + +[Option Capture Source:TV Tuner] +name = input-video + +[Option Capture Source:FM] +name = input-radio + +[Option Capture Source:Mic/Line] +name = input + +[Option Capture Source:Line/Mic] +name = input + +[Option Capture Source:Microphone] +name = input-microphone + +[Option Capture Source:Int DMic] +name = input-microphone-internal + +[Option Capture Source:iMic] +name = input-microphone-internal + +[Option Capture Source:i-Mic] +name = input-microphone-internal + +[Option Capture Source:Internal Microphone] +name = input-microphone-internal + +[Option Capture Source:Front Microphone] +name = input-microphone + +[Option Capture Source:Mic1] +name = input-microphone + +[Option Capture Source:Mic2] +name = input-microphone + +[Option Capture Source:D-Mic] +name = input-microphone + +[Option Capture Source:IntMic] +name = input-microphone-internal + +[Option Capture Source:ExtMic] +name = input-microphone-external + +[Option Capture Source:Ext Mic] +name = input-microphone-external + +[Option Capture Source:E-Mic] +name = input-microphone-external + +[Option Capture Source:e-Mic] +name = input-microphone-external + +[Option Capture Source:LineIn] +name = input-linein + +[Option Capture Source:Analog] +name = input + +[Option Capture Source:Line-In] +name = input-linein + +[Option Capture Source:Line In] +name = input-linein + +[Option Capture Source:Video] +name = input-video + +[Option Capture Source:Aux] +name = input + +[Option Capture Source:Aux0] +name = input + +[Option Capture Source:Aux1] +name = input + +[Option Capture Source:Aux2] +name = input + +[Option Capture Source:Aux3] +name = input + +[Option Capture Source:AUX IN] +name = input + +[Option Capture Source:Aux In] +name = input + +[Option Capture Source:AOUT] +name = input + +[Option Capture Source:AUX] +name = input + +[Option Capture Source:Cam Mic] +name = input-microphone + +[Option Capture Source:Digital Mic] +name = input-microphone + +[Option Capture Source:Digital Mic 1] +name = input-microphone + +[Option Capture Source:Digital Mic 2] +name = input-microphone + +[Option Capture Source:Analog Inputs] +name = input + +[Option Capture Source:Unknown1] +name = input + +[Option Capture Source:Unknown2] +name = input + +[Option Capture Source:Docking-Station] +name = input-docking + +;;; 'Mic Jack Mode' + +[Element Mic Jack Mode] +enumeration = select + +[Option Mic Jack Mode:Mic In] +name = input-microphone + +[Option Mic Jack Mode:Line In] +name = input-linein + +;;; 'Digital Input Source' + +[Element Digital Input Source] +enumeration = select + +[Option Digital Input Source:Digital Mic 1] +name = input-microphone + +[Option Digital Input Source:Analog Inputs] +name = input + +[Option Digital Input Source:Digital Mic 2] +name = input-microphone + +;;; 'Analog Source' + +[Element Analog Source] +enumeration = select + +[Option Analog Source:Mic] +name = input-microphone + +[Option Analog Source:Line in] +name = input-linein + +[Option Analog Source:Aux] +name = input + +;;; 'Shared Mic/Line in' + +[Element Shared Mic/Line in] +enumeration = select + +[Option Shared Mic/Line in:Mic in] +name = input-microphone + +[Option Shared Mic/Line in:Line in] +name = input-linein + +;;; Various Boosts + +[Element Capture Boost] +switch = select + +[Option Capture Boost:on] +name = input-boost-on + +[Option Capture Boost:off] +name = input-boost-off + +[Element Auto Gain Control] +switch = select + +[Option Auto Gain Control:on] +name = input-agc-on + +[Option Auto Gain Control:off] +name = input-agc-off diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf new file mode 100644 index 0000000..360a1fc --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf @@ -0,0 +1,5 @@ +; Some gaming devices have a separate "chat" device, this is for voice chat +; while playing games. This device is just a fairly standard analog mono +; device, but it's nicer to make it clear that this is the "chat" device +; as is mentioned in the marketing info and manual. +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf new file mode 100644 index 0000000..bda137d --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf @@ -0,0 +1,118 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Path for the second headphone output on dual-headphone machines. +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 98 + +[Properties] +device.icon_name = audio-headphones + +; HP EliteDesk 800 SFF Headphone +[Jack Front Headphone,1] +required-any = any + +; HP EliteDesk 800 DM Headphone +[Jack Front Headphone Surround] +required-any = any + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +; This profile path is intended to control the second headphones, not +; the first headphones. But it should not hurt if we leave the +; headphone jack enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone,1] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headphone+LO] +switch = mute +volume = zero + +[Element Speaker+LO] +switch = off +volume = off + +[Element Headphone2] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Speaker] +switch = off +volume = off + +[Element Desktop Speaker] +switch = off +volume = off + +; On some machines, the Front Volume Control is shared by Headphone and Lineout, +; or Headphone and Speaker, but they have independent Volume Switch. Here only +; use switch to mute Lineout or Speaker. +[Element Front] +switch = off +volume = zero + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +[Element Bass Speaker] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf new file mode 100644 index 0000000..3c62c5e --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf @@ -0,0 +1,180 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Path for mixers that have a 'Headphone' control +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 99 +description-key = analog-output-headphones + +[Properties] +device.icon_name = audio-headphones + +[Jack Dock Headphone] +required-any = any + +[Jack Dock Headphone Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Jack Front Headphone] +required-any = any + +; HP EliteDesk 800 DM Headset +[Jack Front Headphone Front] +required-any = any + +[Jack Front Headphone Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Jack Headphone] +required-any = any + +[Jack Headphone Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +# This jack can be either a headphone *or* a mic. Used on some ASUS netbooks. +[Jack Headphone Mic] +required-any = any + +[Jack Headphone - Output] +required-any = any + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +[Element Speaker+LO] +switch = off +volume = off + +[Element Headphone+LO] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Headphone] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +; This path is intended to control the first headphones, not +; the second headphones. But it should not hurt if we leave the second +; headphone jack enabled nonetheless. +[Element Headphone,1] +switch = mute +volume = zero + +[Element Headset] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Line HP Swap] +switch = on +required-any = any + +; This profile path is intended to control the first headphones, not +; the second headphones. But it should not hurt if we leave the second +; headphone jack enabled nonetheless. +[Element Headphone2] +switch = mute +volume = zero + +[Element Speaker] +switch = off +volume = off + +[Element Desktop Speaker] +switch = off +volume = off + +; On some machines, the Front Volume Control is shared by Headphone and Lineout, +; or Headphone and Speaker, but they have independent Volume Switch. Here only +; use switch to mute Lineout or Speaker. +[Element Front] +switch = off +volume = zero + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +[Element Bass Speaker] +switch = off +volume = off + +[Element Speaker Front] +switch = off +volume = off + +[Element Speaker Surround] +switch = off +volume = off + +[Element Speaker Side] +switch = off +volume = off + +[Element Speaker CLFE] +switch = off +volume = off + +[Element Speaker Center/LFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf new file mode 100644 index 0000000..1ffce22 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf @@ -0,0 +1,214 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +[General] +priority = 90 +description-key = analog-output-lineout + +[Jack Line Out] +required-any = any + +[Jack Line Out Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Front Line Out] +required-any = any + +[Jack Front Line Out Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Rear Line Out] +required-any = any + +[Jack Rear Line Out Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out Front] +required-any = any + +[Jack Line Out Front Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out CLFE] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out CLFE Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out Surround] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out Surround Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out Side] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Line Out Side Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Jack Dock Line Out] +required-any = any + +[Jack Dock Line Out Phantom] +state.plugged = unknown +state.unplugged = unknown +required-any = any + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Speaker+LO] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right +required-any = any + +[Element Headphone+LO] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right +required-any = any + +[Element Master Mono] +switch = off +volume = off + +[Element Line HP Swap] +switch = off +required-any = any + +; This profile path is intended to control line out, let's mute headphones +; else there will be a spike when plugging in headphones +[Element Headphone] +switch = off +volume = off + +[Element Headphone,1] +switch = off +volume = off + +[Element Headphone2] +switch = off +volume = off + +[Element Speaker] +switch = off +volume = off + +[Element Desktop Speaker] +switch = off +volume = off + +[Element Front] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Rear] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Side] +switch = mute +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Center] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element LFE] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +[Element CLFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +[Element Center/LFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +[Element Bass Speaker] +switch = off +volume = off + +[Element Speaker Front] +switch = off +volume = off + +[Element Speaker Surround] +switch = off +volume = off + +[Element Speaker Side] +switch = off +volume = off + +[Element Speaker CLFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf new file mode 100644 index 0000000..5e49405 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf @@ -0,0 +1,99 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Intended for usage on boards that have a separate Mono output plug. +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 50 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = off +volume = off + +[Element Master Mono] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +; This profile path is intended to control the speaker, not the +; headphones. But it should not hurt if we leave the headphone jack +; enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone,1] +switch = mute +volume = zero + +[Element Headphone+LO] +switch = mute +volume = zero + +[Element Headphone2] +switch = mute +volume = zero + +[Element Speaker] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Speaker+LO] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Desktop Speaker] +switch = off +volume = off + +[Element Front] +switch = off +volume = off + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf new file mode 100644 index 0000000..756afa9 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf @@ -0,0 +1,187 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Path for mixers that don't have a 'Speaker' control, but where we +; force enable the speaker paths nonetheless. +; Needed for some older Dell laptops. +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 100 +description-key = analog-output-speaker + +[Properties] +device.icon_name = audio-speakers + +[Jack Headphone] +state.plugged = no +state.unplugged = unknown + +[Jack Front Headphone] +state.plugged = no +state.unplugged = unknown + +[Jack Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Line Out Front] +state.plugged = no +state.unplugged = unknown + +[Jack Front Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Rear Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Dock Line Out] +state.plugged = no +state.unplugged = unknown + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +; This profile path is intended to control the speaker, not the +; headphones. But it should not hurt if we leave the headphone jack +; enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone,1] +switch = mute +volume = zero + +[Element Headphone2] +switch = mute +volume = zero + +[Element Headphone+LO] +switch = off +volume = off + +[Element Speaker+LO] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Speaker] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Desktop Speaker] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Front] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Front Speaker] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Rear] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround Speaker] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Side] +switch = mute +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Center] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element Center Speaker] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element LFE] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +[Element LFE Speaker] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +[Element Bass Speaker] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +[Element CLFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +[Element Center/LFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf new file mode 100644 index 0000000..72f928f --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf @@ -0,0 +1,246 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Path for mixers that have a 'Speaker' control +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 100 +description-key = analog-output-speaker + +[Properties] +device.icon_name = audio-speakers + +[Jack Headphone] +state.plugged = no +state.unplugged = unknown + +[Jack Dock Headphone] +state.plugged = no +state.unplugged = unknown + +[Jack Front Headphone] +state.plugged = no +state.unplugged = unknown + +[Jack Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Line Out Front] +state.plugged = no +state.unplugged = unknown + +[Jack Front Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Rear Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Dock Line Out] +state.plugged = no +state.unplugged = unknown + +[Jack Speaker] +required-any = any + +[Jack Speaker Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Jack Speaker Front Phantom] +required-any = any +state.plugged = unknown +state.unplugged = unknown + +[Jack Speaker - Output] +required-any = any + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +; Make sure the internal speakers are not auto-muted once the system has speakers +[Element Auto-Mute Mode] +enumeration = select + +[Option Auto-Mute Mode:Disabled] +name = analog-output-speaker + +; This profile path is intended to control the speaker, let's mute headphones +; else there will be a spike when plugging in headphones +[Element Headphone] +switch = off +volume = off + +[Element Headphone,1] +switch = off +volume = off + +[Element Headphone2] +switch = off +volume = off + +[Element Headphone+LO] +switch = off +volume = off + +[Element Speaker+LO] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Speaker] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Desktop Speaker] +required-any = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Front] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Front Speaker] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right +required-any = any + +[Element Speaker Front] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right +required-any = any + +[Element Rear] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround Speaker] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right +required-any = any + +[Element Speaker Surround] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right +required-any = any + +[Element Side] +switch = mute +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Speaker Side] +switch = mute +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Center] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element Center Speaker] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center +required-any = any + +[Element LFE] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +[Element LFE Speaker] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe +required-any = any + +[Element Bass Speaker] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe +required-any = any + +[Element CLFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +[Element Center/LFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +[Element Speaker CLFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf new file mode 100644 index 0000000..0f6b5f5 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf @@ -0,0 +1,88 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Intended for the 'default' output. Note that a-o-speaker.conf has a +; higher priority than this +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 99 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +[Element Front] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Rear] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Side] +switch = mute +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Center] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element LFE] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +[Element CLFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +[Element Center/LFE] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,lfe + +.include analog-output.conf.common diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common new file mode 100644 index 0000000..31d4b44 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common @@ -0,0 +1,186 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Common part of all paths + +; So here's generally how mixer paths are used by PA: PA goes through +; a mixer path file from top to bottom and checks if a mixer element +; described therein exists. If so it is added to the list of mixer +; elements PA will control, keeping the order it read them in. If a +; mixer element described here has set the required= or +; required-absent= directives a path might not be accepted as valid +; and is ignored in its entirety (see below). However usually if a +; element listed here is missing this one element is ignored but not +; the entire path. +; +; When a device shall be muted/unmuted *all* elements listed in a path +; file with "switch = mute" will be toggled. +; +; When a device shall change its volume, PA will got through the list +; of all elements with "volume = merge" and set the volume on the +; first element. If that element does not support dB volumes, this is +; where the story ends. If it does support dB volumes, PA divides the +; requested volume by the volume that was set on this element, and +; then go on to the next element with "volume = merge" and then set +; that there, and so on. That way the first volume element in the +; path will be the one that does the 'biggest' part of the overall +; volume adjustment, with the remaining elements usually being set to +; some value next to 0dB. This logic makes sure we get the full range +; over all volume sliders and a very high granularity of volumes +; already in hardware. +; +; All switches and enumerations set to "select" are exposed via the +; "port" functionality of sinks/sources. Basically every possible +; switch setting and every possible enumeration setting will be +; combined and made into a "port". So make sure you don't list too +; many switches/enums for exposing, because the number of ports might +; rise exponentially. +; +; Only one path can be selected at a time. All paths that are valid +; for an audio device will be exposed as "port" for the sink/source. + + +; [General] +; type = ... # The device type. It's highly recommended to set a type for every path. +; # See parse_type() in alsa-mixer.c for supported values. +; priority = ... # Priority for this path +; description-key = ... # The path description is looked up from a table in path_verify() in +; # src/modules/alsa/alsa-mixer.c. By default the path name (i.e. the file name +; # minus the ".conf" suffix) is used as the lookup key, but if this option is +; # set, then the given string is used as the key instead. In any case the +; # "description" option can be used to override the path description. +; description = ... # Description for this path. Overrides the normal description lookup logic, as +; # described in the "description-key" documentation above. +; mute-during-activation = yes | no # If this path supports hardware mute, should the hw mute be used while activating this +; # path? In some cases this can reduce extra noises during port switching, while in other +; # cases this can increase such noises. Default: no. +; eld-device = ... # If this is an HDMI port, set to "auto" so that PulseAudio will try to read +; # the monitor ELD information from the ALSA mixer. By default the ELD information +; # is not read, because it's only applicable with HDMI. Earlier the "auto" option +; # didn't exist, and the hw device index had to be manually configured. For +; # backwards compatibility, it's still possible to manually configure the device +; # index using this option. +; +; [Properties] # Property list for this path. The list is merged into the port property list. +; = # Each property is defined on its own line. +; ... +; +; [Option ...:...] # For each option of an enumeration or switch element +; # that shall be exposed as a sink/source port. Needs to +; # be named after the Element, followed by a colon, followed +; # by the option name, resp. on/off if the element is a switch. +; name = ... # Logical name to use in the path identifier +; priority = ... # Priority if this is made into a device port +; required = ignore | enumeration | any # In this element, this option must exist or the path will be invalid. ("any" is an alias for "enumeration".) +; required-any = ignore | enumeration | any # In this element, either this or another option must exist (or an element) +; required-absent = ignore | enumeration | any # In this element, this option must not exist or the path will be invalid +; +; [Element ...] # For each element that we shall control. The "..." here is the element name, +; # or name and index separated by a comma. +; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available, +; # otherwise don't consider this path valid for the card +; required-any = ignore | switch | volume | enumeration | any # If set, at least one of the elements or jacks with required-any in this +; # path must be present, otherwise this path is invalid for the card +; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not +; # available, otherwise don't consider this path valid for the card +; +; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status, +; # always set it to off, always to on, or make it selectable as port. +; # If set to 'select' you need to define an Option section for on +; # and off +; volume = ignore | merge | off | zero | # What to do with this volume: ignore it, merge it into the device +; # volume slider, always set it to the lowest value possible, or always +; # set it to 0 dB (for whatever that means), or always set it to +; # (this only makes sense in path configurations where +; # the exact hardware and driver are known beforehand). +; volume-limit = # Limit the maximum volume by disabling the volume steps above . +; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable +; # via device ports. If set to 'select' you need to define an Option section +; # for each of the items you want to expose +; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be +; # set the direction of the PCM device is opened as. Generally this doesn't need to be set +; # unless you have a broken driver that has playback controls marked for capture or vice +; # versa +; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too? +; +; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel +; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels +; # Override maps should list for each element channel which high-level channels it controls via a +; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left", +; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of +; # channels in a mask +; [Jack ...] # For each jack that we will use for jack detection +; # The name 'Jack Foo' must match ALSA's 'Foo Jack' control. +; required = ignore | any # If not set to ignore, make the path invalid if this jack control is not present. +; required-absent = ignore | any # If not set to ignore, make the path invalid if this jack control is present. +; required-any = ignore | any # If not set to ignore, make the path invalid if no jack controls and no elements with +; # the required-any are present. +; state.plugged = yes | no | unknown # Normally a plugged jack would mean the port becomes available, and an unplugged means it's +; state.unplugged = yes | no | unknown # unavailable, but the port status can be overridden by specifying state.plugged and/or state.unplugged. +; append-pcm-to-name = no | yes # Add ",pcm=N" to the jack name? N is the hw PCM device index. HDMI jacks have +; # the PCM device index in their name, but different drivers use different +; # numbering schemes, so we can't hardcode the full jack name in our configuration +; # files. + +[Element PCM] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element External Amplifier] +switch = select + +[Option External Amplifier:on] +name = output-amplifier-on +priority = 10 + +[Option External Amplifier:off] +name = output-amplifier-off +priority = 0 + +[Element Bass Boost] +switch = select + +[Option Bass Boost:on] +name = output-bass-boost-on +priority = 0 + +[Option Bass Boost:off] +name = output-bass-boost-off +priority = 10 + +[Element IEC958] +switch = off + +[Element IEC958 Optical Raw] +switch = off + +;;; 'Analog Output' + +[Element Analog Output] +enumeration = select + +[Option Analog Output:Speakers] +name = output-speaker +priority = 10 + +[Option Analog Output:Headphones] +name = output-headphones +priority = 9 + +[Option Analog Output:FP Headphones] +name = output-headphones +priority = 8 diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf new file mode 100644 index 0000000..bb3cec1 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort +type = hdmi +priority = 59 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf new file mode 100644 index 0000000..3389a72 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 2 +type = hdmi +priority = 58 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf new file mode 100644 index 0000000..7607f8f --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 11 +type = hdmi +priority = 49 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf new file mode 100644 index 0000000..316d810 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 3 +type = hdmi +priority = 57 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf new file mode 100644 index 0000000..0601ef7 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 4 +type = hdmi +priority = 56 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf new file mode 100644 index 0000000..ded155b --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 5 +type = hdmi +priority = 55 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf new file mode 100644 index 0000000..de31791 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 6 +type = hdmi +priority = 54 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf new file mode 100644 index 0000000..6d72176 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 7 +type = hdmi +priority = 53 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf new file mode 100644 index 0000000..d5d0771 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 8 +type = hdmi +priority = 52 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf new file mode 100644 index 0000000..0b8f9cd --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 9 +type = hdmi +priority = 51 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf new file mode 100644 index 0000000..f15797c --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf @@ -0,0 +1,12 @@ +[General] +description = HDMI / DisplayPort 10 +type = hdmi +priority = 50 +eld-device = auto + +[Properties] +device.icon_name = video-display + +[Jack HDMI/DP] +append-pcm-to-name = yes +required = ignore diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf new file mode 100644 index 0000000..babc839 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf @@ -0,0 +1,20 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +[Element PCM Capture Source] +enumeration = select + +[Option PCM Capture Source:IEC958 In] +name = iec958-input diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf new file mode 100644 index 0000000..d47e5eb --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf @@ -0,0 +1,18 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + + +[Element IEC958] +switch = mute diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf new file mode 100644 index 0000000..5842bfe --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf @@ -0,0 +1,27 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Steelseries Arctis 5 USB headset stereo chat path. The headset has two +; output devices. The first one is meant for voice audio, and the second +; one meant for everything else. The purpose of this unusual design is to +; provide separate volume controls for voice and other audio, which can be +; useful in gaming. + +[General] +priority = 50 + +[Element Com Speaker] +switch = mute +volume = merge diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf new file mode 100644 index 0000000..b758a6f --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf @@ -0,0 +1,27 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Steelseries Arctis 5 USB headset stereo game path. The headset has two +; output devices. The first one is meant for voice audio, and the second +; one meant for everything else. The purpose of this unusual design is to +; provide separate volume controls for voice and other audio, which can be +; useful in gaming. + +[General] +priority = 99 + +[Element PCM] +switch = mute +volume = merge diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf new file mode 100644 index 0000000..9fa7fe9 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf @@ -0,0 +1,34 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; USB gaming headset microphone input path. These headsets usually have two +; output devices. The first one is mono, meant for voice audio, and the second +; one is stereo, meant for everything else. The purpose of this unusual design +; is to provide separate volume controls for voice and other audio, which can +; be useful in gaming. +; +; Works with: +; Steelseries Arctis 7 +; Steelseries Arctis Pro Wireless. +; Lucidsound LS31 + +[General] +description-key = analog-input-microphone-headset + +[Element Headset] +volume = merge +switch = mute +override-map.1 = all +override-map.2 = all-left,all-right diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf new file mode 100644 index 0000000..6df662f --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf @@ -0,0 +1,34 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; USB gaming headset mono output path. These headsets usually have two +; output devices. The first one is mono, meant for voice audio, and the second +; one is stereo, meant for everything else. The purpose of this unusual design +; is to provide separate volume controls for voice and other audio, which can +; be useful in gaming. +; +; Works with: +; Steelseries Arctis 7 +; Steelseries Arctis Pro Wireless. +; Lucidsound LS31 + +[General] +description-key = analog-output-headphones-mono + +[Element PCM] +volume = merge +switch = mute +override-map.1 = all +override-map.2 = all-left,all-right diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf new file mode 100644 index 0000000..1a1e794 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf @@ -0,0 +1,34 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; USB gaming headset mono output path. These headsets usually have two +; output devices. The first one is mono, meant for voice audio, and the second +; one is stereo, meant for everything else. The purpose of this unusual design +; is to provide separate volume controls for voice and other audio, which can +; be useful in gaming. +; +; Works with: +; Steelseries Arctis 7 +; Steelseries Arctis Pro Wireless. +; Lucidsound LS31 + +[General] +description-key = analog-output-headphones + +[Element PCM,1] +volume = merge +switch = mute +override-map.1 = all +override-map.2 = all-left,all-right diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf new file mode 100644 index 0000000..7f111f2 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf @@ -0,0 +1,5 @@ +[Element PCM,1] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf new file mode 100644 index 0000000..043596e --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf @@ -0,0 +1,94 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Creative Sound Blaster Audigy product line +; +; These are just copies of the mappings we find in default.conf, with the +; small change of making analog-stereo and analog-mono non-fallback mappings. +; This is needed because these cards only support duplex profiles with mono +; inputs, and in the default configuration, with stereo being a fallback +; mapping, the mono mapping is never tried. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = yes + +# Based on stereo-fallback +[Mapping analog-stereo] +device-strings = hw:%f +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +# Based on mono-fallback +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic +priority = 1 + +# The rest of these are identical to what's in default.conf +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf new file mode 100644 index 0000000..cc74852 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf @@ -0,0 +1,68 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Behringer U-Phoria UMC22 +; +; Default mapping only allows to use stereo input and sound card has two +; physical input channels. +; +; However in case of only using a single input channel (like condenser +; microphone) only one channel will have any sound, which is often +; inconvenient for casual use. +; +; This config includes mono input options which makes it much more +; friendly in single input configuration. +; +; This config also removes default digital input/output mappings that do +; not physically exist on this card. +; +; Added by Nazar Mokrynskyi + +[General] +auto-profiles = yes + +[Mapping analog-stereo-input] +device-strings = hw:%f +channel-map = left,right +paths-input = analog-input-mic +direction = input +priority = 4 + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono,mono +paths-input = analog-input-mic +direction = input +priority = 3 + +[Mapping analog-mono-left] +device-strings = hw:%f +channel-map = mono,aux1 +paths-input = analog-input-mic +direction = input +priority = 2 + +[Mapping analog-mono-right] +device-strings = hw:%f +channel-map = aux1,mono +paths-input = analog-input-mic +direction = input +priority = 1 + +[Mapping analog-stereo-output] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output +direction = output diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf new file mode 100644 index 0000000..1b6f61c --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf @@ -0,0 +1,66 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +# Config for CMEDIA USB2.0 High-Speed True HD Audio 147a:e055 +# Added by Jean-Philippe Guillemin + + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 10 + +# If everything else fails, try to use hw:0 as a stereo device. +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 8 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 7 +direction = output + +[Mapping iec958-stereo] +device-strings = hw:%f,2 hw:%f,0 +channel-map = left,right +paths-output = iec958-stereo-output +paths-input = iec958-stereo-input +priority = 5 diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf new file mode 100644 index 0000000..fc58982 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf @@ -0,0 +1,589 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Default profile definitions for the ALSA backend of PulseAudio. This +; is used as fallback for all cards that have no special mapping +; assigned (and should be good enough for the vast majority of +; cards). If you want to assign a different profile set than this one +; to a device, either set the udev property PULSE_PROFILE_SET for the +; card, or use the "profile_set" module argument when loading +; module-alsa-card. +; +; So what is this about? Simply, what we do here is map ALSA devices +; to how they are exposed in PA. We say which ALSA device string to +; use to open a device, which channel mapping to use then, and which +; mixer path to use. This is encoded in a 'mapping'. Multiple of these +; mappings can be bound together in a 'profile' which is then directly +; exposed in the UI as a card profile. Each mapping assigned to a +; profile will result in one sink/source to be created if the profile +; is selected for the card. +; +; Additionally, the path set configuration files can describe the +; decibel values assigned to the steps of the volume elements. This +; can be used to work around situations when the alsa driver doesn't +; provide any decibel information, or when the information is +; incorrect. + + +; [General] +; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate +; # them by combining every input mapping with every output mapping. +; +; [Mapping id] +; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. +; channel-map = ... # Channel mapping to use for this device +; description = ... # Description for the mapping. Note that it's better to set the description +; # in the well_known_descriptions table in alsa-mixer.c than with this +; # option, because the descriptions in alsa-mixer.c are translatable. +; description-key = ... # A custom key for the well_known_descriptions table (by default the mapping +; # name is used). +; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. +; # If multiple are found to be working they will be available as device ports +; paths-output = ... +; element-input = ... # Instead of configuring a full mixer path simply configure a single +; # mixer element for volume/mute handling. The value can be an element +; # name, or name and index separated by a comma. +; element-output = ... +; priority = ... +; direction = any | input | output # Only useful for? +; +; exact-channels = yes | no # If no, and the exact number of channels is not supported, +; # allow device to be opened with another channel count +; fallback = no | yes # This mapping will only be considered if all non-fallback mappings fail +; intended-roles = ... # Set the device.intended_roles property for the sink/source. +; +; [Profile id] +; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be +; # defined in this file too +; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be +; # defined in this file too +; description = ... +; priority = ... # Numeric value to deduce priority for this profile +; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile +; # will be assumed as working without probing. Makes initialization +; # a bit faster but only works if the card is really known well. +; +; fallback = no | yes # This profile will only be considered if all non-fallback profiles fail +; [DecibelFix element] # Decibel fixes can be used to work around missing or incorrect dB +; # information from alsa. A decibel fix is a table that maps volume steps +; # to decibel values for one volume element. The "element" part in the +; # section title is the name of the volume element (or name and index +; # separated by a comma). +; # +; # NOTE: This feature is meant just as a help for figuring out the correct +; # decibel values. PulseAudio is not the correct place to maintain the +; # decibel mappings! +; # +; # If you need this feature, then you should make sure that when you have +; # the correct values figured out, the alsa driver developers get informed +; # too, so that they can fix the driver. +; +; db-values = ... # The option value consists of pairs of step numbers and decibel values. +; # The pairs are separated with whitespace, and steps are separated from +; # the corresponding decibel values with a colon. The values must be in an +; # increasing order. Here's an example of a valid string: +; # +; # "0:-40.50 1:-38.70 3:-33.00 11:0" +; # +; # The lowest step imposes a lower limit for hardware volume and the +; # highest step correspondingly imposes a higher limit. That means that +; # that the mixer will never be set outside those values - the rest of the +; # volume scale is done using software volume. +; # +; # As can be seen in the example, you don't need to specify a dB value for +; # each step. The dB values for skipped steps will be linearly interpolated +; # using the nearest steps that are given. + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 15 + +# If everything else fails, try to use hw:0 as a stereo device... +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +# ...and if even that fails, try to use hw:0 as a mono device. +[Mapping mono-fallback] +device-strings = hw:%f +fallback = yes +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic +priority = 1 + +# If everything else fails, try to use hw:0 as a stereo device. +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping iec958-dts-surround-51] +device-strings = dca:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping hdmi-stereo] +description = Digital Stereo (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = left,right +priority = 9 +direction = output + +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 8 +direction = output + +[Mapping hdmi-surround71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 8 +direction = output + +[Mapping hdmi-dts-surround] +description = Digital Surround 5.1 (HDMI/DTS) +device-strings = dcahdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra1] +description = Digital Stereo (HDMI 2) +device-strings = hdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra1] +description = Digital Surround 5.1 (HDMI 2) +device-strings = hdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra1] +description = Digital Surround 7.1 (HDMI 2) +device-strings = hdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra1] +description = Digital Surround 5.1 (HDMI 2/DTS) +device-strings = dcahdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra2] +description = Digital Stereo (HDMI 3) +device-strings = hdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra2] +description = Digital Surround 5.1 (HDMI 3) +device-strings = hdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra2] +description = Digital Surround 7.1 (HDMI 3) +device-strings = hdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra2] +description = Digital Surround 5.1 (HDMI 3/DTS) +device-strings = dcahdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra3] +description = Digital Stereo (HDMI 4) +device-strings = hdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra3] +description = Digital Surround 5.1 (HDMI 4) +device-strings = hdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra3] +description = Digital Surround 7.1 (HDMI 4) +device-strings = hdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra3] +description = Digital Surround 5.1 (HDMI 4/DTS) +device-strings = dcahdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra4] +description = Digital Stereo (HDMI 5) +device-strings = hdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra4] +description = Digital Surround 5.1 (HDMI 5) +device-strings = hdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra4] +description = Digital Surround 7.1 (HDMI 5) +device-strings = hdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra4] +description = Digital Surround 5.1 (HDMI 5/DTS) +device-strings = dcahdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra5] +description = Digital Stereo (HDMI 6) +device-strings = hdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra5] +description = Digital Surround 5.1 (HDMI 6) +device-strings = hdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra5] +description = Digital Surround 7.1 (HDMI 6) +device-strings = hdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra5] +description = Digital Surround 5.1 (HDMI 6/DTS) +device-strings = dcahdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra6] +description = Digital Stereo (HDMI 7) +device-strings = hdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra6] +description = Digital Surround 5.1 (HDMI 7) +device-strings = hdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra6] +description = Digital Surround 7.1 (HDMI 7) +device-strings = hdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra6] +description = Digital Surround 5.1 (HDMI 7/DTS) +device-strings = dcahdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra7] +description = Digital Stereo (HDMI 8) +device-strings = hdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra7] +description = Digital Surround 5.1 (HDMI 8) +device-strings = hdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra7] +description = Digital Surround 7.1 (HDMI 8) +device-strings = hdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra7] +description = Digital Surround 5.1 (HDMI 8/DTS) +device-strings = dcahdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra8] +description = Digital Stereo (HDMI 9) +device-strings = hdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra8] +description = Digital Surround 5.1 (HDMI 9) +device-strings = hdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra8] +description = Digital Surround 7.1 (HDMI 9) +device-strings = hdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra8] +description = Digital Surround 5.1 (HDMI 9/DTS) +device-strings = dcahdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra9] +description = Digital Stereo (HDMI 10) +device-strings = hdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra9] +description = Digital Surround 5.1 (HDMI 10) +device-strings = hdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra9] +description = Digital Surround 7.1 (HDMI 10) +device-strings = hdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra9] +description = Digital Surround 5.1 (HDMI 10/DTS) +device-strings = dcahdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra10] +description = Digital Stereo (HDMI 11) +device-strings = hdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra10] +description = Digital Surround 5.1 (HDMI 11) +device-strings = hdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra10] +description = Digital Surround 7.1 (HDMI 11) +device-strings = hdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra10] +description = Digital Surround 5.1 (HDMI 11/DTS) +device-strings = dcahdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping multichannel-output] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = output + +[Mapping multichannel-input] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = input + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf new file mode 100644 index 0000000..1186552 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf @@ -0,0 +1,55 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Dell Dock TB16 USB audio +; +; This card has two stereo pairs of output, One Mono input. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-headphone] +description = Headphone +device-strings = hw:%f,0,0 +channel-map = left,right +direction = output + +[Mapping analog-stereo-speaker] +description = Speaker +device-strings = hw:%f,1,0 +channel-map = left,right +direction = output + +[Mapping analog-stereo-mic] +description = Headset-Mic +device-strings = hw:%f,0,0 +channel-map = left,right +direction = input + + +[Profile output:analog-stereo-speaker] +description = Speaker +output-mappings = analog-stereo-speaker +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-headphone+input:analog-stereo-mic] +description = Headset +output-mappings = analog-stereo-headphone +input-mappings = analog-stereo-mic +priority = 80 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf new file mode 100644 index 0000000..41924f4 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf @@ -0,0 +1,153 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; This profile forces speaker and internal mic ports even if we have no way +; of identifying those. +; See default.conf for explanations. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping analog-stereo] +device-strings = front:%f hw:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-4-channel-input] +# Alsa doesn't currently provide any better device name than "hw" for 4-channel +# input. If this causes trouble at some point, then we will need to get a new +# device name standardized in alsa. +device-strings = hw:%f +channel-map = aux0,aux1,aux2,aux3 +priority = 1 +direction = input + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping iec958-dts-surround-51] +device-strings = dca:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping hdmi-stereo] +description = Digital Stereo (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = left,right +priority = 4 +direction = output + +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 3 +direction = output + +[Mapping hdmi-surround71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 3 +direction = output + +[Mapping hdmi-dts-surround] +description = Digital Surround 5.1 (HDMI/DTS) +device-strings = dcahdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 1 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf new file mode 100644 index 0000000..dec57d5 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf @@ -0,0 +1,152 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; This profile forces a speaker port even if we have no way of identifying it. +; See default.conf for explanations. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping analog-stereo] +device-strings = front:%f hw:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-4-channel-input] +# Alsa doesn't currently provide any better device name than "hw" for 4-channel +# input. If this causes trouble at some point, then we will need to get a new +# device name standardized in alsa. +device-strings = hw:%f +channel-map = aux0,aux1,aux2,aux3 +priority = 1 +direction = input + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping iec958-dts-surround-51] +device-strings = dca:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping hdmi-stereo] +description = Digital Stereo (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = left,right +priority = 4 +direction = output + +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 3 +direction = output + +[Mapping hdmi-surround71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 3 +direction = output + +[Mapping hdmi-dts-surround] +description = Digital Surround 5.1 (HDMI/DTS) +device-strings = dcahdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 1 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf new file mode 100644 index 0000000..a683a4e --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf @@ -0,0 +1,35 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; HP Thunderbolt Dock 120W G2 +; +; This dock has a 3.5mm headset connector. Both input and output are stereo. +; +; There's a separate speakerphone module called "HP Thunderbolt Dock Audio +; Module", which can be attached to this dock. The module will appear in ALSA +; as a separate USB sound card, configuration for it is in +; hp-tbt-dock-audio-module.conf. + +[General] +auto-profiles = no + +[Mapping analog-stereo-headset] +device-strings = hw:%f,0,0 +channel-map = left,right + +[Profile output:analog-stereo-headset+input:analog-stereo-headset] +output-mappings = analog-stereo-headset +input-mappings = analog-stereo-headset +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf new file mode 100644 index 0000000..692ab8d --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf @@ -0,0 +1,36 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; HP Thunderbolt Dock Audio Module +; +; This device attaches to the "HP Thunderbolt Dock 120W G2" dock. The audio +; module provides a speakerphone with echo cancellation and appears in ALSA as +; a USB sound card with stereo input and output. +; +; The dock itself has a 3.5mm headset connector and appears as a separate USB +; sound card, configuration for it is in hp-tbt-dock-120w-g2.conf. + +[General] +auto-profiles = no + +[Mapping analog-stereo-speakerphone] +device-strings = hw:%f,0,0 +channel-map = left,right +intended-roles = phone + +[Profile output:analog-stereo-speakerphone+input:analog-stereo-speakerphone] +output-mappings = analog-stereo-speakerphone +input-mappings = analog-stereo-speakerphone +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf new file mode 100644 index 0000000..d51fd17 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf @@ -0,0 +1,38 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Audio profile for the Microsoft Kinect Sensor device in UAC mode. +; +; Copyright (C) 2011 Antonio Ospite +; +; This device has an array of four microphones, and no playback capability. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping input-4-channels] +device-strings = hw:%f +channel-map = front-left,front-right,rear-left,rear-right +description = 4 Channels Input +direction = input +priority = 5 + +[Profile input:mic-array] +description = Microphone Array +input-mappings = input-4-channels +priority = 2 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf new file mode 100644 index 0000000..5122907 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf @@ -0,0 +1,86 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; M-Audio FastTrack Pro +; +; This card has one duplex stereo channel called A and an additional +; stereo output channel called B. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a-output] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right +direction = output + +; Try both device 0 and device 1 for input, see +; http://mailman.alsa-project.org/pipermail/alsa-devel/2012-March/050701.html +[Mapping analog-stereo-a-input] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 hw:%f,1,0 +channel-map = left,right +direction = input + +[Mapping analog-stereo-b-output] +description = Analog Stereo Channel B +device-strings = hw:%f,1,0 +channel-map = left,right +direction = output + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channel A, Analog Stereo output Channel B +output-mappings = analog-stereo-a-output analog-stereo-b-output +input-mappings = analog-stereo-a-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-a-output+input:analog-stereo-a-input] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a-output +input-mappings = analog-stereo-a-input +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b-output +input-mappings = +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a-output +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b-output +priority = 6 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a-input +priority = 2 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf new file mode 100644 index 0000000..f7cbc15 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf @@ -0,0 +1,90 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Audio 4 DJ +; +; This card has two stereo pairs of input and two stereo pairs of +; output, named channels A and B. Channel B has an additional +; Headphone connector. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-b-output] +description = Analog Stereo Channel B (Headphones) +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-b-input] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B (Headphones) +output-mappings = analog-stereo-a analog-stereo-b-output +input-mappings = analog-stereo-a analog-stereo-b-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a +input-mappings = analog-stereo-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B (Headphones) +output-mappings = analog-stereo-b-output +input-mappings = analog-stereo-b-input +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B (Headphones) +output-mappings = analog-stereo-b-output +priority = 6 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-b] +description = Analog Stereo Input Channel B +input-mappings = analog-stereo-b-input +priority = 1 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf new file mode 100644 index 0000000..dc1b780 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf @@ -0,0 +1,161 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Audio 8 DJ +; +; This card has four stereo pairs of input and four stereo pairs of +; output, named channels A to D. Channel C has an additional Mic/Line +; connector, channel D an additional Headphone connector. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right + +# Since we want to set a different description for channel C's/D's input +# and output we define two separate mappings for them +[Mapping analog-stereo-c-output] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = output + +[Mapping analog-stereo-c-input] +description = Analog Stereo Channel C (Line/Mic) +device-strings = hw:%f,0,2 +channel-map = left,right +direction = input + +[Mapping analog-stereo-d-output] +description = Analog Stereo Channel D (Headphones) +device-strings = hw:%f,0,3 +channel-map = left,right +direction = output + +[Mapping analog-stereo-d-input] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones) +output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output +input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-d+input:analog-stereo-c] +description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input +output-mappings = analog-stereo-d-output +input-mappings = analog-stereo-c-input +priority = 90 +skip-probe = yes + +[Profile output:analog-stereo-c-d+input:analog-stereo-c-d] +description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic) +output-mappings = analog-stereo-c-output analog-stereo-d-output +input-mappings = analog-stereo-c-input analog-stereo-d-input +priority = 80 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a +input-mappings = analog-stereo-a +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-b +input-mappings = analog-stereo-b +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-c+input:analog-stereo-c] +description = Analog Stereo Duplex Channel C (Line/Mic) +output-mappings = analog-stereo-c-output +input-mappings = analog-stereo-c-input +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-d+input:analog-stereo-d] +description = Analog Stereo Duplex Channel D (Headphones) +output-mappings = analog-stereo-d-output +input-mappings = analog-stereo-d-input +priority = 70 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 6 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-c] +description = Analog Stereo Output Channel C +output-mappings = analog-stereo-c-output +priority = 7 +skip-probe = yes + +[Profile output:analog-stereo-d] +description = Analog Stereo Output Channel D (Headphones) +output-mappings = analog-stereo-d-output +priority = 8 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-b] +description = Analog Stereo Input Channel B +input-mappings = analog-stereo-b +priority = 1 +skip-probe = yes + +[Profile input:analog-stereo-c] +description = Analog Stereo Input Channel C (Line/Mic) +input-mappings = analog-stereo-c-input +priority = 4 +skip-probe = yes + +[Profile input:analog-stereo-d] +description = Analog Stereo Input Channel D +input-mappings = analog-stereo-d-input +priority = 3 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf new file mode 100644 index 0000000..92b89da --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf @@ -0,0 +1,111 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Komplete Audio 6 +; +; This card has three stereo pairs of input and three stereo pairs of +; output. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-out-ab] +description = Analog Stereo 1/2 +device-strings = hw:%f,0,0 +channel-map = left,right,aux0,aux1,aux2,aux3 +direction = output + +[Mapping analog-stereo-out-cd] +description = Analog Stereo 3/4 +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,left,right,aux2,aux3 +direction = output + +[Mapping stereo-out-ef] +description = Analog Stereo 5/6 +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,aux2,aux3,left,right +direction = output + +[Mapping analog-mono-in-a] +description = Analog Mono Input 1 +device-strings = hw:%f,0,0 +channel-map = mono,aux0,aux1,aux2,aux3,aux4 +direction = input + +[Mapping analog-mono-in-b] +description = Anlog Mono Input 2 +device-strings = hw:%f,0,0 +channel-map = aux0,mono,aux1,aux2,aux3,aux4 +direction = input + +[Mapping analog-stereo-in-ab] +description = Analog Stereo Input 1/2 +device-strings = hw:%f,0,0 +channel-map = left,right,aux0,aux1,aux2,aux3 +direction = input + +[Mapping analog-stereo-in-cd] +description = Analog Stereo Input 3/4 +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,left,right,aux2,aux3 +direction = input + +[Mapping stereo-in-ef] +description = Stereo Input 5/6 +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,aux2,aux3,left,right +direction = input + +[Profile output:analog-stereo-out-ab+input:analog-stereo-in-ab] +description = Analog Stereo Output 1/2, Analog Stereo Input 1/2 +output-mappings = analog-stereo-out-ab +input-mappings = analog-stereo-in-ab +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-out-ab+input:analog-mono-in-a] +description = Analog Stereo Output 1/2, Analog Mono Input 1 +output-mappings = analog-stereo-out-ab +input-mappings = analog-mono-in-a +priority = 95 +skip-probe = yes + +[Profile output:analog-stereo-out-ab+input:analog-mono-in-b] +description = Analog Stereo Output 1/2, Analog Mono Input 2 +output-mappings = analog-stereo-out-ab +input-mappings = analog-mono-in-b +priority = 90 +skip-probe = yes + +[Profile output:analog-stereo-out-cd+input:analog-stereo-in-cd] +description = Analog Stereo Output 3/4, Analog Stereo Input 3/4 +output-mappings = analog-stereo-out-cd +input-mappings = analog-stereo-in-cd +priority = 80 +skip-probe = yes + +[Profile output:stereo-out-ef+input:stereo-in-ef] +description = Stereo Output 5/6 (S/PDIF), Stereo Input 5/6 (S/PDIF) +output-mappings = stereo-out-ef +input-mappings = stereo-in-ef +priority = 70 +skip-probe = yes + diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf new file mode 100644 index 0000000..35b3d06 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf @@ -0,0 +1,84 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Kore Controller +; +; This card has one stereo pairs of input and two stereo pairs of +; output, named "Master" and "Headphone". The master channel has +; an additional Coax S/PDIF connector which is always on. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-master-out] +description = Analog Stereo Master Channel +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-headphone-out] +description = Analog Stereo Headphone Channel +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-input] +description = Analog Stereo +device-strings = hw:%f,0,0 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Master Output, Headphones Output +output-mappings = analog-stereo-master-out analog-stereo-headphone-out +input-mappings = analog-stereo-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-master+input:analog-stereo-input] +description = Analog Stereo Duplex Master Output +output-mappings = analog-stereo-master-out +input-mappings = analog-stereo-input +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-headphone-out+input:analog-stereo-input] +description = Analog Stereo Headphones Output +output-mappings = analog-stereo-headphone-out +input-mappings = analog-stereo-input +priority = 30 +skip-probe = yes + +[Profile output:analog-stereo-master] +description = Analog Stereo Master Output +output-mappings = analog-stereo-master-out +priority = 3 +skip-probe = yes + +[Profile output:analog-stereo-headphone] +description = Analog Stereo Headphones Output +output-mappings = analog-stereo-headphone-out +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-input] +description = Analog Stereo Input +input-mappings = analog-stereo-input +priority = 1 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf new file mode 100644 index 0000000..c210297 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf @@ -0,0 +1,130 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Audio 10 DJ +; +; This card has five stereo pairs of input and five stereo pairs of +; output +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-out-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-out-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-c] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-d] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = output + +[Mapping analog-stereo-in-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-in-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-c] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-d] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = input + + + + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels Main, A, B, C, D +output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b analog-stereo-out-c analog-stereo-out-d +input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b analog-stereo-in-c analog-stereo-in-d +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-main+input:analog-stereo-main] +description = Analog Stereo Duplex Main +output-mappings = analog-stereo-out-main +input-mappings = analog-stereo-in-main +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-out-a +input-mappings = analog-stereo-in-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-out-b +input-mappings = analog-stereo-in-b +priority = 30 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-c] +description = Analog Stereo Duplex Channel C +output-mappings = analog-stereo-out-c +input-mappings = analog-stereo-in-c +priority = 20 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-d] +description = Analog Stereo Duplex Channel D +output-mappings = analog-stereo-out-d +input-mappings = analog-stereo-in-d +priority = 10 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf new file mode 100644 index 0000000..145dace --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf @@ -0,0 +1,53 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Traktor Audio 2 +; +; This card has two stereo pairs of output. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right +direction = output + +[Mapping analog-stereo-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b +priority = 50 +skip-probe = yes + +[Profile analog-stereo-all] +description = Analog Stereo Output Channels A & B +output-mappings = analog-stereo-a analog-stereo-b +priority = 100 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf new file mode 100644 index 0000000..a08e9fc --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf @@ -0,0 +1,91 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Audio 6 DJ +; +; This card has three stereo pairs of input and three stereo pairs of +; output +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-out-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-out-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-in-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-in-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + + + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B (Headphones) +output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b +input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-main+input:analog-stereo-main] +description = Analog Stereo Duplex Channel Main +output-mappings = analog-stereo-out-main +input-mappings = analog-stereo-in-main +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-out-a +input-mappings = analog-stereo-in-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-out-b +input-mappings = analog-stereo-in-b +priority = 30 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf new file mode 100644 index 0000000..934965f --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf @@ -0,0 +1,80 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Native Instruments Traktor Kontrol S4 +; +; This controller has two stereo pairs of input (named "Channel C" and +; "Channel D") and two stereo pairs of output, one "Main Out" and +; "Headphone Out". +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-output-main] +description = Analog Stereo Main Out +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-output-headphone] +description = Analog Stereo Headphones Out +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-c-input] +description = Analog Stereo Channel C +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-d-input] +description = Analog Stereo Channel D +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex +output-mappings = analog-stereo-output-main analog-stereo-output-headphone +input-mappings = analog-stereo-c-input analog-stereo-d-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-main] +description = Analog Stereo Main Output +output-mappings = analog-stereo-output-main +priority = 4 +skip-probe = yes + +[Profile output:analog-stereo-headphone] +description = Analog Stereo Output Headphones Out +output-mappings = analog-stereo-output-headphone +priority = 3 +skip-probe = yes + +[Profile input:analog-stereo-c] +description = Analog Stereo Input Channel C +input-mappings = analog-stereo-c-input +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-d] +description = Analog Stereo Input Channel D +input-mappings = analog-stereo-d-input +priority = 1 +skip-probe = yes + diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf new file mode 100644 index 0000000..d5d1d65 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf @@ -0,0 +1,112 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; Creative Sound Blaster Omni Surround 5.1 +; +; This config supports Linux 4.3-rc1+. +; By default there are some non-existing (physically) inputs and outputs that +; are not present in this config. +; Also in addition to natively supported modes (such as stereo, 5.1 and stereo +; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0. +; +; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-input] +device-strings = hw:%f +channel-map = left,right +paths-input = analog-input-mic analog-input-linein +direction = input + +[Mapping analog-stereo-output] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output +direction = output + +[Mapping analog-surround-21] +device-strings = surround51:%f +channel-map = front-left,front-right,aux1,aux2,aux3,lfe +paths-output = analog-output +direction = output + +[Mapping analog-surround-40] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output +direction = output + +[Mapping analog-surround-41] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe +paths-output = analog-output +direction = output + +[Mapping analog-surround-50] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-output = iec958-stereo-output +direction = output + +[Profile output:analog-stereo-output+input:analog-stereo-input] +output-mappings = analog-stereo-output +input-mappings = analog-stereo-input +priority = 7 + +[Profile output:analog-surround-21+input:analog-stereo-input] +output-mappings = analog-surround-21 +input-mappings = analog-stereo-input +priority = 6 + +[Profile output:analog-surround-40+input:analog-stereo-input] +output-mappings = analog-surround-40 +input-mappings = analog-stereo-input +priority = 5 + +[Profile output:analog-surround-41+input:analog-stereo-input] +output-mappings = analog-surround-41 +input-mappings = analog-stereo-input +priority = 4 + +[Profile output:analog-surround-50+input:analog-stereo-input] +output-mappings = analog-surround-50 +input-mappings = analog-stereo-input +priority = 3 + +[Profile output:analog-surround-51+input:analog-stereo-input] +output-mappings = analog-surround-51 +input-mappings = analog-stereo-input +priority = 2 + +[Profile output:iec958-stereo+input:analog-stereo-input] +output-mappings = iec958-stereo +input-mappings = analog-stereo-input +priority = 1 diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf new file mode 100644 index 0000000..0ac1576 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf @@ -0,0 +1,58 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; USB Gaming DAC. +; These devices have two output devices. The first one is mono, meant for +; voice audio, and the second one is 7.1 surround, meant for everything +; else. The 7.1 surround is mapped to headphones within the device. +; The purpose of the mono/7.1 design is to provide separate volume +; controls for voice and other audio, which can be useful in gaming. +; +; Works with: +; Sennheiser GSX 1000 +; Sennheiser GSX 1200 +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-chat-output] +device-strings = hw:%f,0 +channel-map = mono +paths-output = analog-chat-output +direction = output +priority = 4000 +intended-roles = phone + +[Mapping analog-output-surround71] +device-strings = hw:%f,1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +paths-output = virtual-surround-7.1 +priority = 4100 +direction = output + +[Mapping analog-chat-input] +device-strings = hw:%f,0 +channel-map = mono +paths-input = analog-chat-input +priority = 4100 +direction = input + +[Profile output:analog-output-surround71+output:analog-output-chat+input:analog-input] +output-mappings = analog-output-surround71 analog-chat-output +input-mappings = analog-chat-input +priority = 5100 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf new file mode 100644 index 0000000..809d015 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf @@ -0,0 +1,42 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; This is a profile meant for simple (stereo + mic) headphones. +; default.conf also works but using this one will hide some profiles +; that don't make sense like IEC958 and multichannel inputs. + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 15 + +# If everything else fails, try to use hw:0 as a stereo device... +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +[Mapping analog-mono] +device-strings = hw:%f,0,0 +channel-map = mono +direction = input diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf new file mode 100644 index 0000000..0c58917 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf @@ -0,0 +1,23 @@ +[General] +auto-profiles = yes + +[Mapping analog-chat] +description-key = gaming-headset-chat +device-strings = hw:%f,0,0 +channel-map = left,right +paths-input = analog-input-mic +paths-output = steelseries-arctis-output-chat-common +intended-roles = phone + +[Mapping analog-game] +description-key = gaming-headset-game +device-strings = hw:%f,1,0 +channel-map = left,right +paths-output = steelseries-arctis-output-game-common +direction = output + +[Profile output:analog-chat+output:analog-game+input:analog-chat] +output-mappings = analog-chat analog-game +input-mappings = analog-chat +priority = 5100 +skip-probe = yes diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf new file mode 100644 index 0000000..6c44736 --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf @@ -0,0 +1,136 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Default profile definitions for the ALSA backend of PulseAudio. This +; is used as fallback for all cards that have no special mapping +; assigned (and should be good enough for the vast majority of +; cards). If you want to assign a different profile set than this one +; to a device, either set the udev property PULSE_PROFILE_SET for the +; card, or use the "profile_set" module argument when loading +; module-alsa-card. +; +; So what is this about? Simply, what we do here is map ALSA devices +; to how they are exposed in PA. We say which ALSA device string to +; use to open a device, which channel mapping to use then, and which +; mixer path to use. This is encoded in a 'mapping'. Multiple of these +; mappings can be bound together in a 'profile' which is then directly +; exposed in the UI as a card profile. Each mapping assigned to a +; profile will result in one sink/source to be created if the profile +; is selected for the card. +; +; Additionally, the path set configuration files can describe the +; decibel values assigned to the steps of the volume elements. This +; can be used to work around situations when the alsa driver doesn't +; provide any decibel information, or when the information is +; incorrect. + + +; [General] +; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate +; # them by combining every input mapping with every output mapping. +; +; [Mapping id] +; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. +; channel-map = ... # Channel mapping to use for this device +; description = ... +; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. +; # If multiple are found to be working they will be available as device ports +; paths-output = ... +; element-input = ... # Instead of configuring a full mixer path simply configure a single +; # mixer element for volume/mute handling +; element-output = ... +; priority = ... +; direction = any | input | output # Only useful for? +; +; [Profile id] +; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be +; # defined in this file too +; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be +; # defined in this file too +; description = ... +; priority = ... # Numeric value to deduce priority for this profile +; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile +; # will be assumed as working without probing. Makes initialization +; # a bit faster but only works if the card is really known well. +; +; [DecibelFix element] # Decibel fixes can be used to work around missing or incorrect dB +; # information from alsa. A decibel fix is a table that maps volume steps +; # to decibel values for one volume element. The "element" part in the +; # section title is the name of the volume element. +; # +; # NOTE: This feature is meant just as a help for figuring out the correct +; # decibel values. PulseAudio is not the correct place to maintain the +; # decibel mappings! +; # +; # If you need this feature, then you should make sure that when you have +; # the correct values figured out, the alsa driver developers get informed +; # too, so that they can fix the driver. +; +; db-values = ... # The option value consists of pairs of step numbers and decibel values. +; # The pairs are separated with whitespace, and steps are separated from +; # the corresponding decibel values with a colon. The values must be in an +; # increasing order. Here's an example of a valid string: +; # +; # "0:-40.50 1:-38.70 3:-33.00 11:0" +; # +; # The lowest step imposes a lower limit for hardware volume and the +; # highest step correspondingly imposes a higher limit. That means that +; # that the mixer will never be set outside those values - the rest of the +; # volume scale is done using software volume. +; # +; # As can be seen in the example, you don't need to specify a dB value for +; # each step. The dB values for skipped steps will be linearly interpolated +; # using the nearest steps that are given. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping usb-analog-stereo] +device-strings = hw:%f +channel-map = left,right +paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping usb-analog-surround-51] +device-strings = hw:%f +;channel-map = front-left,front-right,front-center,lfe,rear-left,rear-right +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-lfe-on-mono +priority = 180 +direction = output + +[Mapping multichannel-input] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = input +paths-input = multichannel-input + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf new file mode 100644 index 0000000..adda54d --- /dev/null +++ b/media-config-target-vf2/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf @@ -0,0 +1,64 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see . + +; USB gaming headset. +; These headsets usually have two output devices. The first one is meant +; for voice audio, and the second one is meant for everything else. +; The purpose of this unusual design is to provide separate volume +; controls for voice and other audio, which can be useful in gaming. +; +; Works with: +; Steelseries Arctis 7 +; Steelseries Arctis Pro Wireless. +; Lucidsound LS31 +; Astro A50 +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = yes + +[Mapping mono-chat] +description-key = gaming-headset-chat +device-strings = hw:%f,0,0 +channel-map = mono +paths-output = usb-gaming-headset-output-mono +paths-input = usb-gaming-headset-input +intended-roles = phone + +[Mapping stereo-chat] +description-key = gaming-headset-chat +device-strings = hw:%f,0,0 +channel-map = left,right +paths-output = usb-gaming-headset-output-stereo +paths-input = usb-gaming-headset-input +intended-roles = phone + +[Mapping stereo-game] +description-key = gaming-headset-game +device-strings = hw:%f,1,0 +channel-map = left,right +paths-output = usb-gaming-headset-output-stereo +direction = output + +[Profile output:mono-chat+output:stereo-game+input:mono-chat] +output-mappings = mono-chat stereo-game +input-mappings = mono-chat +priority = 5100 + +[Profile output:stereo-game+output:stereo-chat+input:mono-chat] +output-mappings = stereo-game stereo-chat +input-mappings = mono-chat +priority = 5100 -- cgit v1.2.3