From 848709bb538b948109921a9b0468dda4ff4b3059 Mon Sep 17 00:00:00 2001 From: Seungbae Shin Date: Fri, 9 Jul 2021 20:46:35 +0900 Subject: [c4] Add media-config-target-c4 clone from rb5 for ODROID-C4 [Version] 0.3.9 [Issue Type] Add Change-Id: Ia74c7886434774c5288d310c3b4af2fc4dae7832 --- media-config-target-c4.manifest | 5 + media-config-target-c4/hal/etc/asound.conf | 16 ++ .../hal/etc/inference/inference_engine.ini | 3 + .../hal/etc/multimedia/mmfw_audio_pcm_dump.ini | 8 + .../hal/etc/multimedia/mmfw_audio_volume.ini | 19 ++ .../hal/etc/multimedia/mmfw_camcorder.ini | 103 ++++++++ .../hal/etc/multimedia/mmfw_camcorder_camera0.ini | 208 +++++++++++++++ .../hal/etc/multimedia/mmfw_media_codec.ini | 89 +++++++ .../hal/etc/multimedia/mmfw_media_streamer.ini | 124 +++++++++ .../hal/etc/multimedia/mmfw_player.ini | 102 +++++++ .../etc/multimedia/mmfw_player_audio_effect.ini | 17 ++ .../hal/etc/multimedia/mmfw_resource_manager.ini | 9 + .../hal/etc/multimedia/mmfw_streamrecorder.ini | 81 ++++++ .../hal/etc/multimedia/mmfw_webrtc.ini | 123 +++++++++ .../hal/etc/multimedia/mmfw_wfd_sink.ini | 231 ++++++++++++++++ .../hal/etc/multimedia/mused.conf | 66 +++++ .../hal/etc/multimedia/scmirroring_src.ini | 114 ++++++++ media-config-target-c4/hal/etc/murphy/murphy.lua | 99 +++++++ media-config-target-c4/hal/etc/pulse/client.conf | 37 +++ media-config-target-c4/hal/etc/pulse/daemon.conf | 83 ++++++ media-config-target-c4/hal/etc/pulse/default.pa | 149 +++++++++++ .../hal/etc/pulse/device-map.json | 16 ++ .../hal/etc/pulse/stream-map.json | 191 +++++++++++++ media-config-target-c4/hal/etc/pulse/system.pa | 74 ++++++ media-config-target-c4/hal/etc/xdg/gstomx.conf | 84 ++++++ .../alsa-mixer/paths/analog-input-aux.conf | 62 +++++ .../alsa-mixer/paths/analog-input-fm.conf | 62 +++++ .../alsa-mixer/paths/analog-input-linein.conf | 61 +++++ .../alsa-mixer/paths/analog-input-mic-line.conf | 63 +++++ .../alsa-mixer/paths/analog-input-mic.conf | 63 +++++ .../alsa-mixer/paths/analog-input-mic.conf.common | 63 +++++ .../alsa-mixer/paths/analog-input-tvtuner.conf | 62 +++++ .../alsa-mixer/paths/analog-input-video.conf | 61 +++++ .../pulseaudio/alsa-mixer/paths/analog-input.conf | 54 ++++ .../alsa-mixer/paths/analog-input.conf.common | 294 +++++++++++++++++++++ .../paths/analog-output-headphones-2.conf | 82 ++++++ .../alsa-mixer/paths/analog-output-headphones.conf | 82 ++++++ .../paths/analog-output-lfe-on-mono.conf | 85 ++++++ .../alsa-mixer/paths/analog-output-mono.conf | 82 ++++++ .../alsa-mixer/paths/analog-output-speaker.conf | 94 +++++++ .../pulseaudio/alsa-mixer/paths/analog-output.conf | 92 +++++++ .../alsa-mixer/paths/analog-output.conf.common | 128 +++++++++ .../alsa-mixer/profile-sets/default.conf | 144 ++++++++++ .../profile-sets/native-instruments-audio4dj.conf | 91 +++++++ .../profile-sets/native-instruments-audio8dj.conf | 162 ++++++++++++ .../alsa-mixer/profile-sets/tizen_usb.conf | 127 +++++++++ packaging/media-config.spec | 33 ++- 47 files changed, 4097 insertions(+), 1 deletion(-) create mode 100644 media-config-target-c4.manifest create mode 100644 media-config-target-c4/hal/etc/asound.conf create mode 100644 media-config-target-c4/hal/etc/inference/inference_engine.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_audio_pcm_dump.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_audio_volume.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_camcorder.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_camcorder_camera0.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_media_codec.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_media_streamer.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_player.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_player_audio_effect.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_resource_manager.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_streamrecorder.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_webrtc.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mmfw_wfd_sink.ini create mode 100644 media-config-target-c4/hal/etc/multimedia/mused.conf create mode 100644 media-config-target-c4/hal/etc/multimedia/scmirroring_src.ini create mode 100644 media-config-target-c4/hal/etc/murphy/murphy.lua create mode 100644 media-config-target-c4/hal/etc/pulse/client.conf create mode 100644 media-config-target-c4/hal/etc/pulse/daemon.conf create mode 100644 media-config-target-c4/hal/etc/pulse/default.pa create mode 100644 media-config-target-c4/hal/etc/pulse/device-map.json create mode 100644 media-config-target-c4/hal/etc/pulse/stream-map.json create mode 100644 media-config-target-c4/hal/etc/pulse/system.pa create mode 100644 media-config-target-c4/hal/etc/xdg/gstomx.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf create mode 100644 media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf diff --git a/media-config-target-c4.manifest b/media-config-target-c4.manifest new file mode 100644 index 0000000..a76fdba --- /dev/null +++ b/media-config-target-c4.manifest @@ -0,0 +1,5 @@ + + + + + diff --git a/media-config-target-c4/hal/etc/asound.conf b/media-config-target-c4/hal/etc/asound.conf new file mode 100644 index 0000000..dc87ead --- /dev/null +++ b/media-config-target-c4/hal/etc/asound.conf @@ -0,0 +1,16 @@ +# default sound configuration + +pcm. !default { + type hw + card ALSA +} + +ctl. !default { + type hw + card ALSA +} + +ctl. bcm2835 { + type hw + card ALSA +} diff --git a/media-config-target-c4/hal/etc/inference/inference_engine.ini b/media-config-target-c4/hal/etc/inference/inference_engine.ini new file mode 100644 index 0000000..54eddf2 --- /dev/null +++ b/media-config-target-c4/hal/etc/inference/inference_engine.ini @@ -0,0 +1,3 @@ +[inference backend] +;/*OPENCV=0, Tensorflow-lite=1 +supported backend types = 0,1 diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_audio_pcm_dump.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_audio_pcm_dump.ini new file mode 100644 index 0000000..6e13b68 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_audio_pcm_dump.ini @@ -0,0 +1,8 @@ +[pcm_dump] +;playback +pa_sink = 0 +pa_sink_input = 0 + +;capture +pa_source = 0 +pa_source_output = 0 diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_audio_volume.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_audio_volume.ini new file mode 100644 index 0000000..ae7e635 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_audio_volume.ini @@ -0,0 +1,19 @@ +[volumes] +system = 0, 72, 73, 74, 75, 76, 77, 78, 80, 81, 82, 84, 86, 88, 90, 94 +notification = 0, 68, 70, 72, 73, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 97 +alarm = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92 +ringtone = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92 +media = 0, 46, 50, 53, 58, 62, 68, 72, 76, 80, 84, 87, 90, 93, 96, 100 +call = 60, 65, 70, 76, 82, 88, 94, 100 +voip = 60, 65, 70, 76, 82, 88, 94, 100 +voice = 0, 55, 58, 61, 64, 67, 70, 75, 78, 82, 86, 89, 91, 94, 97, 100 +gain_dialer = 1.00 +gain_touch = 1.00 +gain_af = 0.70 +gain_shutter1 = 0.14 +gain_shutter2 = 1.00 +gain_camcording = 0.30 +gain_midi = 1.00 +gain_booting = 0.40 +gain_video = 0.90 +gain_tts = 1.00 diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_camcorder.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_camcorder.ini new file mode 100644 index 0000000..0d139a2 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_camcorder.ini @@ -0,0 +1,103 @@ +; < Camera/Camcorder Configure Main INI file > +; +; - Header List - +; 1. General +; 2. VideoInput +; 3. AudioInput +; 4. VideoOutput +; 5. Capture +; 6. Record +; 7. VideoEncoder +; 8. AudioEncoder +; 9. ImageEncoder +; 10. Mux +; +; - Note - +; If you want to add a new header, +; add a new enum value to "enum ConfigureCategoryMain" +; and new default table for it in mm_camcorder_configure.c/.h +; + +[General] +SyncStateChange = 1 +;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE +;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE +ModelName = GT-TIZEN +;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE + +[VideoInput] +VideosrcElement = v4l2src | 1,0 | do-timestamp,1 +UseVideoscale = 1 +VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1 +UseZeroCopyFormat = 0 +DeviceCount = 1 +SupportMediaPacketPreviewCb = 1 + +[AudioInput] +AudioDevice = 0,1 || 0 +AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1 +AudiomodemsrcElement = pulsesrc | 1,0 | do-timestamp,1 + +[VideoOutput] +; DisplayDevice +;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT +DisplayDevice = 0 || 0 +; DisplayMode +;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen +DisplayMode = 0,1,2 || 0 +; Videosink +;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote +Videosink = 0,3,4 || 3 +VideosinkElementOverlay = tizenwlsink | 7,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0 | use-tbm,0 +VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0 +VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0 +UseVideoconvert = 1 +VideoconvertElement = videoconvert | 0,0 + +[VideoEncoder] +MPEG4 = avenc_mpeg4 | 0,0 + +[AudioEncoder] +AMR = amrnbenc | 0,0 +AAC = avenc_aac | 1,0 | compliance,-2 +WAVE = wavenc | 0,0 + +[ImageEncoder] +JPEG = jpegenc | 0,0 +;PNG = pngenc | 0,0 + +[Capture] +UseEncodebin = 1 +UseCaptureMode = 0 +VideoscaleElement = videoscale | 1,0 | method,1 + +[Record] +UseAudioEncoderQueue = 1 +UseVideoEncoderQueue = 0 +VideoProfile = 0 +VideoAutoAudioConvert = 1 +VideoAutoAudioResample = 0 +VideoAutoColorSpace = 1 +AudioProfile = 1 +AudioAutoAudioConvert = 1 +AudioAutoAudioResample = 0 +AudioAutoColorSpace = 0 +ImageProfile = 2 +ImageAutoAudioConvert = 0 +ImageAutoAudioResample = 0 +ImageAutoColorSpace = 1 +RecordsinkElement = filesink | 1,0 | async,0 +UseNoiseSuppressor = 0 +DropVideoFrame = 0 +PassFirstVideoFrame = 0 + +[Mux] +3GP = 3gppmux | 0,0 +AMR = avmux_amr | 0,0 +MP4 = mp4mux | 0,0 +AVI = avimux | 0,0 +MATROSKA = matroskamux | 0,0 +WAV = wavenc | 0,0 +AAC = avmux_adts | 0,0 +M2TS = mpegtsmux | 0,0 + diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_camcorder_camera0.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_camcorder_camera0.ini new file mode 100644 index 0000000..dea154c --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_camcorder_camera0.ini @@ -0,0 +1,208 @@ +; < Camera/Camcorder Configure Control INI file > +; +; - Header List - +; 1. Camera +; 2. Strobe +; 3. Effect +; 4. Photograph +; 5. Capture +; 6. Detect +; +; - Note - +; If you want to add a new header, +; add a new enum value to "enum ConfigureCategoryControl" +; and new default table for it in mm_camcorder_configure.c/.h +; + +[Camera] +; Input index - real setting value +;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA +; Input index - MSL value(convert array index) +;;; -1:NONE, 0:CAMERA0, 1:CAMERA1 +InputIndex = 0,-255 || 0 +DeviceName = USB_CAMERA +PreviewResolution = 320,240 | 640,480 || 640,480 +CaptureResolution = 320,240 | 640,480 || 640,480 +VideoResolution = 320,240 | 640,480 || 640,480 +FPS0 = 0,15,30 || 15 +FPS1 = 0,15,30 || 15 +; PictureForamt - MSL value +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +PictureFormat = 7 || 7 +Overlay = 0,1 || 1 +; Recommend display rotation +;;; 0:NONE, 1:90, 2:180, 3:270 +RecommendDisplayRotation = 0 +; Recommend preview format for capture +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +RecommendPreviewFormatCapture = 7 +; Recommend preview format for record +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264 +RecommendPreviewFormatRecord = 7 +; Recommend preview resolution +;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9), 2: SQUARE ratio(1:1) +RecommendPreviewResolution = 640,480 | 640,480 | 640,480 || 640,480 +; Camera facing direction +;;; 0:REAR, 1:FRONT +FacingDirection = 0 +FrameStabilityCount = 1 + + +[Strobe] +;StrobeControl - Not support +;StrobeCapabilities - Not support +; Strobe mode - real setting value +;;; N/A +; Strobe mode - MSL value(convert array index) +;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT +StrobeMode = 0,-255,-255,-255,-255,-255,-255,-255 || 0 +;StrobeStatus - Not support +;StrobeEV - Not support + + +[Effect] +Brightness = 0,8 || 4 +;Contrast = 1,7 || 4 +;Saturation = 0,4 || 2 +;Sharpness = 0,4 || 2 + +; White balance - real setting value +;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT +; White balance - MSL value(convert array index) +;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM +WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0 + +; Color tone - real setting value +;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM +;;; 11:VINTAGE_COLD, 12:SOLARIZE, 13:POSTERIZE, 14:POINT_BLUE, 15:POINT_RED_YELLOW, 16:POINT_COLOR_3, 17:POINT_GREEN, 18:POINT_RED, 19:POINT_YELLOW, 20:CARTOONIZE +; Color tone - MSL value(convert array index) +;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED, +;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED, +;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW +ColorTone = 1,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 1 +; Flip - real setting value +;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL +; Flip - MSL value(convert array index) +;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE +;Flip = 2,1,0 || 0 + +; Wide Dynamic Range - real setting value +;;; 0:OFF, 1:ON +; Wide Dynamic Range - MSL value(convert array index) +;;; 0:OFF, 1:ON, 2:AUTO +WDR = 0,-255,-255 || 0 + +; Part color mode - real setting value +;;; 0:OFF, 1:SWAP, 2:ACCENT +; Part color mode - MSL value(convert array index) +;;; 0:OFF, 1:SWAP, 2:ACCENT +;PartColorMode = 0,1,2 || 0 + +; Part color - real setting value +;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3, +;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY +; Part color - MSL value(convert array index) +;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3, +;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY +;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0 + + +[Photograph] +;LensInit = 0,1 || 0 +;DigitalZoom = 0,10 || 0 +;OpticalZoom = 0,0 || 0 + +; Focus mode - real setting value +;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS +; Focus mode - MSL value(convert array index) +;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS +FocusMode = 0,-255,-255,-255,-255,-255 || 0 + +; Auto focus type - real setting value +;;; 0:NORMAL, 1:MACRO, 2:FULL +; Auto focus - MSL value(convert array index) +;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL +AFType = 0,-255,-255,-255 || 0 + +; Auto exposure type - real setting value +;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX +; Auto exposure mode - MSL value(convert array index) +;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2 +AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0 + +;ExposureValue - Not support +;FNumber - Not support +;ShutterSpeed - Not support + +; ISO - real setting value +;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600 +; ISO - MSL value(convert array index) +;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200 +ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0 + +; Program mode - real setting value +;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN, +;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT +; Program mode - MSL value(convert array index) +;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE, +;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT +ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0 + +; Anti-handshake - real setting value +;;; 0:OFF, 1:ON +; Anti-handshake - MSL value(convert array index) +;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON +AntiHandshake = 0,-255,-255,-255 || 0 + +; Video-stabilization - real setting value +;;; 0:OFF, 1:ON +; Video-stabilization - MSL value(convert array index) +;;; 0:OFF, 1:ON +VideoStabilization = 0 || 0 + +; Face zoom mode +;;; 0:OFF, 1:ON +FaceZoomMode = 0 || 0 +; Face zoom level +FaceZoomLevel = 0,0 || 0 + +; PTZ(Pan Tilt Zoom) type +;;; 0:Mechanical, 1:Electronic +;PtzType = 0,1 || 1 + +; Pan range for mechanical movement +;PanMecha = -10,10 + +; Pan range for electronic movement +;PanElec = -10,10 + +; Tilt range for mechanical movement +;TiltMecha = -10,10 + +; Tilt range for electronic movement +;TiltElec = -10,10 + + +[Capture] +; Output mode +;;; No need to convert +;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY +OutputMode = 7,13 || 13 +JpegQuality = 0,100 || 90 +MultishotNumber = 1,1 || 1 +SensorEncodedCapture = 0 +; Support HDR +;;; 0: OFF, 1: ON, 2: ON and Original +SupportHDR = 0,-255,-255 || 0 +FrameStabilityCount = 2 + + +[Detect] +; Detect mode +;;; 0:OFF, 1:ON +DetectMode = 0,-255 || 0 +;DetectNumber - Not support +;DetectFocusSelect - Not support +;DetectSelectNumber - Not support +;DetectStatus - Not support + diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_media_codec.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_media_codec.ini new file mode 100644 index 0000000..9f2a5dd --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_media_codec.ini @@ -0,0 +1,89 @@ +[h261] +hw_decoder = , , +hw_encoder = , , +sw_decoder = , , +sw_encoder = , , + +[h263] +hw_decoder = omxdec_h263, video/x-h263, NV12 +hw_encoder = omxenc_h263, video/x-raw, H263 +sw_decoder = avdec_h263, video/x-h263, I420 +sw_encoder = avenc_h263, video/x-raw, H263 + +[h264] +hw_decoder = omxdec_h264, video/x-h264, NV12 +hw_encoder = omxenc_h264, video/x-raw, H264_SP +sw_decoder = avdec_h264, video/x-h264, I420 +sw_encoder = avenc_h264, video/x-raw, H264_SP + +[mpeg4] +hw_decoder = omxdec_mpeg4, video/mpeg, NV12 +hw_encoder = omxenc_mpeg4, video/x-raw, MPEG4_SP +sw_decoder = avdec_mpeg4, video/mpeg, I420 +sw_encoder = avenc_mpeg4, video/x-raw, MPEG4_SP + +[aac_lc] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_aac, audio/mpeg, PCM_F32LE +sw_encoder = avenc_aac, audio/x-raw, AAC_LC + +[aac_he] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_aac, audio/mpeg, PCM_F32LE +sw_encoder = , , + +[aac_he_ps] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_aac, audio/mpeg, PCM_F32LE +sw_encoder = , , + +[mp3] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_mp3, audio/mpeg, PCM_F32LE +sw_encoder = , , + +[amr_nb] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_amrnb, audio/AMR, PCM_F32LE +sw_encoder = amrnbenc, audio/x-raw, AMR_NB + +[amr_wb] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_amrwb, audio/AMR-WB, PCM_F32LE +sw_encoder = , , + +[vorbis] +hw_decoder = , , +hw_encoder = , , +sw_decoder = vorbisdec, audio/x-vorbis, PCM_F32LE +sw_encoder = , , + +[flac] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_flac, audio/x-flac, PCM_F32LE +sw_encoder = , , + +[wmav1] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_wmav1, audio/x-wma, PCM_F32LE +sw_encoder = , , + +[wmav2] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_wmav2, audio/x-wma, PCM_F32LE +sw_encoder = , , + +[wmapro] +hw_decoder = , , +hw_encoder = , , +sw_decoder = avdec_wmapro, audio/x-wma, PCM_F32LE +sw_encoder = , , diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_media_streamer.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_media_streamer.ini new file mode 100644 index 0000000..527ab99 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_media_streamer.ini @@ -0,0 +1,124 @@ +[general] +; generating dot file representing pipeline state +generate dot = no +dot dir = + +; decodebin will be used instead of decoder node +use decodebin = yes + +; comma separated list of element names which +; will not be used in autoplug mode +exclude elements = v4l2video,v4l2h264,v4l2mpeg4,omx,sprd + +; comma separated list of element names which +; will require resources in autoplug mode +resource elements = omx,sprd + +; comma separated list of arguments +; that will pass to gst_init +gstreamer arguments = --gst-debug=2 + + +;MEDIA_STREAMER_NODE_TYPE_SRC +[node type 1] +audio capture = pulsesrc +video capture = waylandsrc +camera = v4l2src + +;MEDIA_STREAMER_NODE_TYPE_SINK +[node type 2] +audio = pulsesink +overlay = tizenwlsink + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_ENCODER +[node type 3] +video/x-h263 = avenc_h263 +;video/x-h264 = + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_DECODER +[node type 4] +video/x-h263 = avdec_h263 +;video/x-h264 = + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_ENCODER +[node type 5] +audio/AMR = amrnbenc + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_DECODER +[node type 6] +audio/AMR = amrnbdec + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_CONVERTER +[node type 7] +video/x-raw = videoconvert + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_CONVERTER +[node type 8] + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_RESAMPLE +[node type 9] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_PAY +[node type 10] +video/x-h263 = rtph263pay +;video/x-h264 = + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_PAY +[node type 11] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_DEPAY +[node type 12] +video/x-h263 = rtph263depay +video/x-h264 = rtph264depay + +;MEDIA_STREAMER_NODE_TYPE_AUDIO_DEPAY +[node type 13] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_RATE +[node type 14] + +;MEDIA_STREAMER_NODE_TYPE_VIDEO_SCALE +[node type 15] + +;MEDIA_STREAMER_NODE_TYPE_TEXT_OVERLAY +[node type 16] +text/x-raw = textoverlay + +;MEDIA_STREAMER_NODE_TYPE_PARSER +[node type 17] +video/x-h263 = h263parse +video/x-h264 = h264parse + +;MEDIA_STREAMER_NODE_TYPE_FILTER +[node type 18] + +;MEDIA_STREAMER_NODE_TYPE_TEE +[node type 19] + +;MEDIA_STREAMER_NODE_TYPE_QUEUE +[node type 20] + +;MEDIA_STREAMER_NODE_TYPE_MQUEUE +[node type 21] + +;MEDIA_STREAMER_NODE_TYPE_MUXER +[node type 22] + +;MEDIA_STREAMER_NODE_TYPE_DEMUXER +[node type 23] + +;MEDIA_STREAMER_NODE_TYPE_RTP +[node type 24] + +;MEDIA_STREAMER_NODE_TYPE_INPUT_SELECTOR +[node type 25] + +;MEDIA_STREAMER_NODE_TYPE_OUTPUT_SELECTOR +[node type 26] + +;MEDIA_STREAMER_NODE_TYPE_INTERLEAVE +[node type 27] + +;MEDIA_STREAMER_NODE_TYPE_DEINTERLEAVE +[node type 28] + diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_player.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_player.ini new file mode 100644 index 0000000..dfbe5e6 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_player.ini @@ -0,0 +1,102 @@ +[general] + +disable segtrap = yes ; same effect with --gst-disable-segtrap + +; set default videosink element according to video surface type(X, EVAS, NULL) +videosink element overlay = tizenwlsink +videosink element fake = fakesink +video converter element = + +; decoder element keyword for resource management. +video codec element hw = v4l2 +video codec element sw = avdec +video codec default type = hw ; hw or sw + +audio codec element hw = +audio codec element sw = avdec +audio codec default type = sw ; hw or sw + +; support with HW audio codec +support audio effect = no +support pcm exporting = no +support pitch control = no +support replaygain control = no + +audiosink element = pulsesink + +; audio offload information +audio offload sink element = +audio offload device type = ; builtin-speaker,bt-a2dp,audio-jack,usb-audio from pulse stream-map +audio offload media format = ; Use the format keyword of media_format_mimetype_e, MAX:10 + +; supported input format of external media source stream +; Use the format keyword of media_format_mimetype_e, MAX:10 +media stream input format = AAC,H264_SP,H264_MP,H264_HP + +; if yes. gstreamer will not update registry +skip rescan = yes +delay before repeat = 50 ; msec + +; comma separated list of tocken which elemnts has it in it's name will not be used +; this works if 'use decodebin = yes' +element exclude keyword = omx + +; comma separated list of tocken +; this works if 'use decodebin = yes' +unsupported codec keyword = divx + +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=*:2) +gstparam1 = --gst-debug=*:2 +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; generating dot file representing pipeline state +; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/" +generate dot = no + +; parameter is for only video to be determined +; which clock will be used +; if yes, system clock will be used +; apart from this, audiosink is clock provider for audio +use system clock = yes + +; allowed timeout for changing pipeline state +live state change timeout = 30 ; sec +localplayback state change timeout = 10 ; sec + +; delay in msec for sending EOS +eos delay = 0 ; msec + +; extracted pcm buffer size +pcm buffer size = 51200 ; 50Kbytes + +; max num of bo for sw codec +video bo max = 10 + +; video bo timeout (sec) +video bo timeout = 10 + +; setup pipeline with decodebin2 +use decodebin = no + +[http streaming] + +httpsrc element = souphttpsrc + +http buffering limit = 99.0 ; percent + +; if yes, use file for buffering. +; if no, use memory for buffering. +http use file buffer = no + +; ring buffer size when use mem buffer +http ring buffer size = 20971520 ; 20MBytes + +http max size bytes = 1048576 ; bytes + +http buffering time = 1.2 + +http timeout = 30 ; sec diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_player_audio_effect.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_player_audio_effect.ini new file mode 100644 index 0000000..1394608 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_player_audio_effect.ini @@ -0,0 +1,17 @@ +[audio effect] +; name of audio effect element +audio effect element = audioeq + +; preset audio effect setting +audio effect preset = no + +; custom audio effect setting (EQ/extension) +audio effect custom = yes +audio effect custom list = 0 + +audio effect custom eq band num = 7 ; number of EQ bands +audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz) +audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz) + +audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect) +audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect) diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_resource_manager.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_resource_manager.ini new file mode 100644 index 0000000..082f297 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_resource_manager.ini @@ -0,0 +1,9 @@ +[max volume] +video_overlay = -1 +video_decoder = -1 +video_encoder = -1 +camera = -1 + +[priority] +media = 10 +interrupt = 99 diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_streamrecorder.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_streamrecorder.ini new file mode 100644 index 0000000..7c12c66 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_streamrecorder.ini @@ -0,0 +1,81 @@ +[general] +;is encsink source is live +encscink source is live = 0 + +retrialcount = 10 + +minimum frame = 5 + +reset pause time = 0 + +screen record = 1 + +convert output buffer num = 6 + +hw encoder supported = 0 ; 1 if supported and 'video codec element hw' should be formed. + +video codec element hw = ; sprd (if verified) or verified hw codec element + +[encodebin] +;MM_STREAMRECORDER_ENCBIN_PROFILE_VIDEO = 0 MM_STREAMRECORDER_ENCBIN_PROFILE_AUDIO = 1 +;MM_STREAMRECORDER_ENCBIN_PROFILE_IMAGE = 2 MM_STREAMRECORDER_ENCBIN_PROFILE_NUM = 3 +encsink bin profile = 0 + +encsink bin auto audio resample = 0 + +encsink bin auto colorspace = 1 + +encsink bin auto audio convert = 1 + +encsink bin use video toggle = 0 + +[pipeline] +encsink bin source = appsrc + +name of audio src = pulsesrc + +h264 encoder = + +h263 encoder = avenc_h263p + +mpeg4 encoder = avenc_mpeg4 + +name of audio encoder = avenc_aac + +use parser = + +name of 3GP muxer = gppmux + +name of MP4 muxer = mp4mux + +name of video converter = videoconvert + +name of sink = filesink + +[video param] +;/*ms*/ +video frame wait time = 200000 + +[audio param] +audio frame minimum space = 102400 + +audio frame wait time = 20000 + +[attribute] +supported height = 1080,720,480,240,288,144 + +supported width = 1920,1280,640,320,352,176 + +;/*AMR, AAC, VORBIS ,PCM*/ +supported audio encoders = AMR,AAC,PCM + +;/* H263 , H264 , MPEG4 */ +supported video encoders = H263,MPEG4 + +;/*3GP , AMR, MP4 , WAV, ADTS*/ +supported file formats = 3GP,MP4,AMR,ADTS,WAV + +[debug] +; generating dot file representing pipeline state +; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell (also do export to '/etc/profile.d/mmf.sh') +generate dot = no diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_webrtc.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_webrtc.ini new file mode 100644 index 0000000..b2e748d --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_webrtc.ini @@ -0,0 +1,123 @@ +[general] +; generating dot file representing pipeline state +generate dot = no +dot path = /tmp + +; | separated list of arguments that will pass to gst_init +gstreamer arguments = --gst-debug=webrtcbin:7,3 + +; comma separated list of elements that will not use in the gstreamer pipeline +gstreamer excluded elements = + +; latency of RTP jitterbuffer +rtp jitterbuffer latency = 100 + +; FEC setting of RTP packets +use ulpfec red = yes + +; default STUN server URL +stun server = stun://stun.l.google.com:19302 + + +[media source] +; default values for video source pipeline (e.g, videotest, camera, screen) +video raw format = I420 +video width = 320 +video height = 240 +video framerate = 30 +video codec = vp8 +video hw encoder element = +video encoded format support = no +video drc support = no +; default values for audio source pipeline (e.g, audiotest, mic) +audio raw format = S16LE +audio samplerate = 8000 +audio channels = 1 +audio codec = opus +audio hw encoder element = + + +[source videotest] +source element = videotestsrc +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codec = +;video hw encoder element = +;video encoded format support = +video drc support = yes + + +[source camera] +source element = v4l2src +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codec = +;video hw encoder element = +;video encoded format support = +;video drc support = + + +[source screen] +source element = waylandsrc +; values below will override the default one of [media source] above +;video raw format = +;video width = +;video height = +;video framerate = +;video codec = +;video hw encoder element = +;video encoded format support = +;video drc support = + + +[source audiotest] +source element = audiotestsrc +; values below will override the default one of [media source] above +;audio raw format = +;audio samplerate = +;audio channels = +;audio codec = +;audio hw encoder element = + + +[source mic] +source element = pulsesrc +; values below will override the default one of [media source] above +;audio raw format = +;audio samplerate = +;audio channels = +;audio codec = +;audio hw encoder element = + + +[rendering sink] +audio sink element = pulsesink +video sink element = tizenwlsink + +; comma separated list of elements, it should be one by one per codec type +audio hw decoder elements = +video hw decoder elements = + + +[resource acquisition] +camera = yes +video encoder = no +video decoder = no +video overlay = no + + +[vpxenc params] +;threads = +;end usage = +;cpu used = +;target bitrate = +;keyframe max dist = +;min quantizer = +;max quantizer = +;undershoot = diff --git a/media-config-target-c4/hal/etc/multimedia/mmfw_wfd_sink.ini b/media-config-target-c4/hal/etc/multimedia/mmfw_wfd_sink.ini new file mode 100644 index 0000000..9981dec --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mmfw_wfd_sink.ini @@ -0,0 +1,231 @@ +[general] +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=2,*wfd*:5) +gstparam1 = --gst-debug=2,*wfd*:5,*wfdtsdemux:1,*wfdrtpbuffer:1 +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; allowed timeout for changing pipeline state +state change timeout = 5; sec + +; 0: default value set by wfdrtspsrc element, other: user define value. +jitter buffer latency=10 + +; for retransmission request enable = yes, disable = no +enable retransmission = no + +; for reset basetime, enable = yes, disable = no +enable reset basetime = yes + +; Maximum number of nanoseconds that a buffer can be late before it is dropped by videosink (-1 unlimited) +video sink max lateness=20000000 + +; nanoseconds to be added to buffertimestamp by sink elements +sink ts offset=250000000 + +; if no, go asynchronously to PAUSED without preroll +audio sink async=no + +; if no, go asynchronously to PAUSED without preroll +video sink async=no + +; user agent +user agent = + +[debug] +; generating dot file representing pipeline state +; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell +generate dot = no + +; set property to wfdsrc plugin for dumping rtsp message +dump rtsp message = yes + +; enable tracing buffers using pad probe +trace buffers = no + +; enable tracing first buffer +trace first buffer = no + +; enable tracing buffers of wfdsrc +trace buffers of wfdsrc = no + +; enable dumping ts data (eg. /var/tmp/*.ts) +dump ts data = no + +; enable dumping rtp data (eg. /var/tmp/screenmirroring_sink_rtp.dump) +dump rtp data = no + + +[pipeline] +wfdsrc element = wfdsrc + +tsdemux element = wfdtsdemux + +audio hdcp element = + +aac parser element = aacparse + +aac decoder element = avdec_aac + +ac3 parser element = ac3parse + +ac3 decoder element = + +lpcm converter element = + +lpcm filter element = capsfilter + +audio resampler element = audioconvert + +audio volume element = + +audio sinkbin queue element = ;queue + +audio sink element = pulsesink + +video hdcp element = + +video h264 parser element = h264parse + +video h265 parser element = + +video h264 decoder element = avdec_h264 + +video h265 decoder element = + +video converter element = videoconvert + +video filter element = + +video sink element = tizenwlsink + +video evas sink element = evaspixmapsink + + +[wfd audio codecs] +; 0x1: LPCM, 0x2: AAC, 0x4: AC3 +;default aac and LPCM +audio codec=0x3 + +audio latency=0x0 + +;0x1 : 48000khz, 0x2: 44100khz +audio sampling frequency=0x3 + +; 0x1:2 channels, 0x2:4 channels, 0x4:6channels, 0x8:8channels +audio channels=0x1 + + +[wfd video formats] +; 0x0:not support, 0x1:H264 +video codec=0x1 + +; 0x0:not supoort, 0x1: CHP, 0x2:CBP +video profile=0x1 + +video native resolution = 0x20 + +video cea support=0x84ab;0x194ab + +video vesa support=0x1;0x5555555 + +video hh support=0x555 + +; 0x1:base, 0x2:high +video profile=0x1 + +; 0x1:level_3_1, 0x2:level_3_2, 0x4:level_4, 0x8:level_4_1, 0x10:level_4_2 +video level=0x2 + +video latency=0x0 + +video vertical resolution=720 + +video horizontal resolution=1280 + +video minimum slicesize=0 + +video slice encoding params=200 + +video framerate control support=11 + + +[wfd hdcp content protection] +enable hdcp = no + +;0x0:none, 0x1:HDCP_2.0, 0x2:HDCP_2.1 +hdcp content protection=0x0 + +hdcp port no=0 + + +[wfd2 video formats] +;0x0:not support, 0x1:H264, 0x2:H265, 0x3:both +video codec=0x3 + +video native resolution = 0x20 + +video non transcoding support=1 + +[wfd2 h264 video format] +video cea support=0x194ab + +video vesa support=0x5555555 + +video hh support=0x555 + +video profile=0x1 + +video level=0x2 + +video latency=0x0 + +video vertical resolution=1080 + +video horizontal resolution=1920 + +video minimum slicesize=0 + +video slice encoding params=200 + +video framerate control support=0 + +[wfd2 h265 video format] +video cea support=394ab + +video vesa support=5555555 + +video hh support=555 + +; 0x1:WFD_H265_MAIN_PROFILE +video profile=0x1 + +; 0x1:WFD_H265_LEVEL_3_1 +video level=0x2 + +video latency=0x0 + +video vertical resolution=2360 + +video horizontal resolution=3840 + +video minimum slicesize=0 + +video slice encoding params=200 + +video framerate control support=0 + +[wfd2 audio codecs] +; 0x1: LPCM, 0x2: AAC, 0x4: AC3 +;default aac and LPCM +audio codec=0x3 + +;see mm_wfd_sink_wfd_enum.h +audio lpcm mode=0x3 + +audio aac mode=0x1 + +audio ac3 mode=0x1 + diff --git a/media-config-target-c4/hal/etc/multimedia/mused.conf b/media-config-target-c4/hal/etc/multimedia/mused.conf new file mode 100644 index 0000000..38e07b8 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/mused.conf @@ -0,0 +1,66 @@ +[muse] +; The 'hosts' parameter defines the modules, +; which the user would like to connect to the muse. +; If you want to add host, then write manually. +hosts=player, camera, recorder +logfile=/var/log/mused/muse-server +lockfile=/tmp/.muse_core.lock +min_timeout=5 +max_timeout=90 +;100MB=100000 +memory_threshold=100000 +enable_watch_external_storage=1 + +; parameters for initializing gstreamer +; DEFAULT SET (--gst-debug=*:2) +gstparam1=--gst-debug=*:2 +gstparam2=--gst-disable-segtrap +gstparam3= +gstparam4= +gstparam5= +gstparam6= +gstparam7= +gstparam8= +gstparam9= +gstparam10= + +; gstparam#=--gst-plugin-load=/usr/lib/gstreamer-1.0/libgstcoreelements.so' +; can be substituted with gstpreload=coreelements' +gstpreload= + +[player] +; The 'player' parameter represents the muse-player. +; This module recovers the "capi-media-player". +path=libmuse-player.so +preloaded=no +timeout=60 +disable_watchdog_api=-1 +;unlimited=-1 +max_instance=-1 +caution_instance=-1 + +[camera] +; The 'camera' parameter represents the muse-camera. +; This module recovers the "capi-media-camera". +path=libmuse-camera.so +preloaded=no +timeout=10 +;api 2 is camera_dispatcher_start_preview +disable_watchdog_api=2 +;unlimited=-1 +max_instance=-1 +caution_instance=-1 + +[recorder] +; The 'recorder' parameter represents the muse-recorder. +; This module recovers the "capi-media-recorder". +; This one should be paired with the 'camera' module. +path=libmuse-recorder.so +preloaded=no +timeout=10 +;api 5 is recorder_start +disable_watchdog_api=5 +;unlimited=-1 +max_instance=-1 +caution_instance=-1 + diff --git a/media-config-target-c4/hal/etc/multimedia/scmirroring_src.ini b/media-config-target-c4/hal/etc/multimedia/scmirroring_src.ini new file mode 100644 index 0000000..68103c5 --- /dev/null +++ b/media-config-target-c4/hal/etc/multimedia/scmirroring_src.ini @@ -0,0 +1,114 @@ + +[general] + +; set default video source element +; 0: ximagesrc, 1: xvimagesrc, 2: camerasrc, 3: videotestsrc, 4:waylandsrc +videosrc element = 4 + +; set default video encoder element +video encoder element = omxh264enc + +disable segtrap = yes ; same effect with --gst-disable-segtrap + +mtu_size value = 1400 + +video converter element = + +; if yes. gstreamer will not update registry +skip rescan = yes + +; set default audio encoder element +audio encoder aac name = avenc_aac +audio encoder ac3 name = avenc_ac3 + +; set audio codec for source +; according to GstWFDAudioFormat +; 0x1: LPCM, 0x2: AAC, 0x4: AC3 +; default aac and LPCM +audio codec = 0x3 + +; set exynos audiosrc property +; exynosaudio device name = alsa_output.0.analog-stereo.monitor +exynosaudio device name = alsa_output.hw_0_0.monitor +audio properties name = props,media.role=loopback-mirroring + +exynosaudio buffer_time = 200000 +; set qcmsm audiosrc property +qcmsmaudio device name = hw:0,8 +qcmsmaudio buffer_time = 1000 + +audio latency_time = 10000 +audio do_timestamp = 0 + +; set video codec for source +; according to GstWFDVideoFormat +; 0x0: Not supportted, 0x1: H264 +; default H.264 +video codec = 0x1 + +; Video Resolutions supported need to be filled in 32 bits according to WFD spec +video resolution_supported = 0x00000001 + +; Bitrate range for different resolutions +; Resolution Set 1: default +; Resolution Set 2: 1920 x 1080 +; Resolution Set 3: 1280 x 720 +; Resolution Set 4: 960 x 540 +; Resolution Set 5: 854 x 480 +; Resolution Set 6: 640 x 360 +; Resolution Set 7: 720 Remote Touch +; UDP bitrate settings +INIT_UDP_resolution_set_1 = 1048576 +MIN_UDP_resolution_set_1 = 838861 +MAX_UDP_resolution_set_1 = 1572864 + +INIT_UDP_resolution_set_2 = 5242880 +MIN_UDP_resolution_set_2 = 3670016 +MAX_UDP_resolution_set_2 = 6291456 + +INIT_UDP_resolution_set_3 = 2621440 +MIN_UDP_resolution_set_3 = 1572864 +MAX_UDP_resolution_set_3 = 3145728 + +INIT_UDP_resolution_set_4 = 2621440 +MIN_UDP_resolution_set_4 = 1572864 +MAX_UDP_resolution_set_4 = 3145728 + +INIT_UDP_resolution_set_5 = 838861 +MIN_UDP_resolution_set_5 = 314573 +MAX_UDP_resolution_set_5 = 1048576 + +INIT_UDP_resolution_set_6 = 838861 +MIN_UDP_resolution_set_6 = 314573 +MAX_UDP_resolution_set_6 = 838861 + +INIT_UDP_resolution_set_7 = 1572864 +MIN_UDP_resolution_set_7 = 838861 +MAX_UDP_resolution_set_7 = 1572864 + + +; Native resolution supported CEA resolution=0, VESA resolution=1, HH resolution=2 +video native_resolution = 0 + +; HDCP encryption +encryption HDCP_enabled = 1 + +; UIBC Capability +uibc UIBC_GEN_capability = 15 + +; parameters for initializing gstreamer +gstparam1 = +gstparam2 = +gstparam3 = +gstparam4 = +gstparam5 = + +; generating dot file representing pipeline state +generate dot = no + +; parameter for clock provide in audiosink +provide clock = yes + +;dumping ts stream to file +dump ts = 0 + diff --git a/media-config-target-c4/hal/etc/murphy/murphy.lua b/media-config-target-c4/hal/etc/murphy/murphy.lua new file mode 100644 index 0000000..9675961 --- /dev/null +++ b/media-config-target-c4/hal/etc/murphy/murphy.lua @@ -0,0 +1,99 @@ +m = murphy.get() + +-- load the dlog plugin +m:try_load_plugin('dlog') + +-- load the console plugin +-- m:try_load_plugin('console') + +-- load the dbus plugin +-- if m:plugin_exists('dbus') then +-- m:load_plugin('dbus') +-- end + +-- load the native resource plugin +if m:plugin_exists('resource-native') then + m:load_plugin('resource-native') + m:info("native resource plugin loaded") +else + m:info("No native resource plugin found...") +end + +-- load the dbus resource plugin +m:try_load_plugin('resource-dbus', { + dbus_bus = "system", + dbus_service = "org.Murphy", + dbus_track = true, + default_zone = "driver", + default_class = "implicit" +}) + +-- load the domain control plugin +if m:plugin_exists('domain-control') then + m:load_plugin('domain-control') +else + m:info("No domain-control plugin found...") +end + +if m:plugin_exists('glib') then + m:load_plugin('glib') +else + m:info("No glib plugin found...") +end + +-- define application classes +application_class { + name = "interrupt", + priority = 99, + modal = false, + share = false, + order = "fifo" +} + +application_class { + name = "media", + priority = 10, + modal = false, + share = false, + order = "lifo" +} + +-- define zone attributes +zone.attributes { + type = {mdb.string, "common", "rw"}, + location = {mdb.string, "anywhere", "rw"} +} + +-- define zones +zone { + name = "driver", + attributes = { + type = "common", + location = "front-left" + } +} + +-- define resource classes +resource.class { + name = "video_overlay", + shareable = false, + sync_release = true +} + +resource.class { + name = "video_decoder", + shareable = false, + sync_release = true +} + +resource.class { + name = "video_encoder", + shareable = false, + sync_release = true +} + +resource.class { + name = "camera", + shareable = false, + sync_release = true +} diff --git a/media-config-target-c4/hal/etc/pulse/client.conf b/media-config-target-c4/hal/etc/pulse/client.conf new file mode 100644 index 0000000..3637b20 --- /dev/null +++ b/media-config-target-c4/hal/etc/pulse/client.conf @@ -0,0 +1,37 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA. + +## Configuration file for PulseAudio clients. See pulse-client.conf(5) for +## more information. Default values are commented out. Use either ; or # for +## commenting. + +; default-sink = +; default-source = +default-server = /var/run/pulse/native +; default-dbus-server = + +autospawn = no +; daemon-binary = /usr/bin/pulseaudio +; extra-arguments = --log-target=syslog + +; cookie-file = + +enable-shm = no +shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB + +; auto-connect-localhost = no +; auto-connect-display = no diff --git a/media-config-target-c4/hal/etc/pulse/daemon.conf b/media-config-target-c4/hal/etc/pulse/daemon.conf new file mode 100644 index 0000000..431e66b --- /dev/null +++ b/media-config-target-c4/hal/etc/pulse/daemon.conf @@ -0,0 +1,83 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 +# USA. + +## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for +## more information. Default values are commented out. Use either ; or # for +## commenting. + +daemonize = yes +; fail = yes +; allow-module-loading = yes +; allow-exit = yes +; use-pid-file = yes +system-instance = yes +; local-server-type = user +; enable-shm = yes +; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB +; lock-memory = no +; cpu-limit = no + +; high-priority = yes +; nice-level = -11 + +realtime-scheduling = yes +realtime-priority = 5 + +; exit-idle-time = 20 +; scache-idle-time = 20 + +; dl-search-path = (depends on architecture) + +; load-default-script-file = yes +; default-script-file = /etc/pulse/default.pa + +log-target = dlog +log-level = info +; log-meta = no +; log-time = no +; log-backtrace = 0 + +resample-method = speex-fixed-3 +; enable-remixing = yes +; enable-lfe-remixing = no + +flat-volumes = no + +; rlimit-fsize = -1 +; rlimit-data = -1 +; rlimit-stack = -1 +; rlimit-core = -1 +; rlimit-as = -1 +; rlimit-rss = -1 +; rlimit-nproc = -1 +; rlimit-nofile = 256 +; rlimit-memlock = -1 +; rlimit-locks = -1 +; rlimit-sigpending = -1 +; rlimit-msgqueue = -1 +; rlimit-nice = 31 +; rlimit-rtprio = 9 +; rlimit-rttime = 1000000 + +; default-sample-format = s16le +; default-sample-rate = 44100 +alternate-sample-rate = 44100 +; default-sample-channels = 2 +; default-channel-map = front-left,front-right + +; default-fragments = 4 +; default-fragment-size-msec = 25 diff --git a/media-config-target-c4/hal/etc/pulse/default.pa b/media-config-target-c4/hal/etc/pulse/default.pa new file mode 100644 index 0000000..ef8f114 --- /dev/null +++ b/media-config-target-c4/hal/etc/pulse/default.pa @@ -0,0 +1,149 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +# This startup script is used only if PulseAudio is started per-user +# (i.e. not in system mode) + +.nofail + +### Load something into the sample cache +#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav +#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav +#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav +#load-sample-lazy pulse-access /usr/share/sounds/generic.wav + +.fail + +### Automatically restore the volume of streams and devices +load-module module-device-restore +load-module module-stream-restore +load-module module-card-restore + +### Automatically augment property information from .desktop files +### stored in /usr/share/application +load-module module-augment-properties + +### Load audio drivers statically +### (it's probably better to not load these drivers manually, but instead +### use module-udev-detect -- see below -- for doing this automatically) +#load-module module-alsa-sink +#load-module module-alsa-source device=hw:1,0 +#load-module module-null-sink +#load-module module-pipe-sink + +### Automatically load driver modules depending on the hardware available +.ifexists module-udev-detect.so +load-module module-udev-detect +.else +### Use the static hardware detection module (for systems that lack udev support) +load-module module-detect +.endif + +### Automatically connect sink and source if JACK server is present +.ifexists module-jackdbus-detect.so +.nofail +load-module module-jackdbus-detect channels=2 +.fail +.endif + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + +### Load several protocols +.ifexists module-esound-protocol-unix.so +load-module module-esound-protocol-unix +.endif +load-module module-native-protocol-unix + +### Network access (may be configured with paprefs, so leave this commented +### here if you plan to use paprefs) +#load-module module-esound-protocol-tcp +#load-module module-native-protocol-tcp + +### Load the RTP receiver module (also configured via paprefs, see above) +#load-module module-rtp-recv + +### Load the RTP sender module (also configured via paprefs, see above) +#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" +#load-module module-rtp-send source=rtp.monitor + +### Load additional modules from GConf settings. This can be configured with the paprefs tool. +### Please keep in mind that the modules configured by paprefs might conflict with manually +### loaded modules. +.ifexists module-gconf.so +.nofail +load-module module-gconf +.fail +.endif + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Honour intended role device property +load-module module-intended-roles + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle + +### If autoexit on idle is enabled we want to make sure we only quit +### when no local session needs us anymore. +.ifexists module-console-kit.so +load-module module-console-kit +.endif +.ifexists module-systemd-login.so +load-module module-systemd-login +.endif + +### Enable positioned event sounds +load-module module-position-event-sounds + +### Cork music/video streams when a phone stream is active +load-module module-role-cork + +### Modules to allow autoloading of filters (such as echo cancellation) +### on demand. module-filter-heuristics tries to determine what filters +### make sense, and module-filter-apply does the heavy-lifting of +### loading modules and rerouting streams. +load-module module-filter-heuristics +load-module module-filter-apply + +### Load DBus protocol +.ifexists module-dbus-protocol.so +load-module module-dbus-protocol +.endif + + +load-module module-switch-on-port-available + +### Make some devices default +#set-default-sink output +#set-default-source input diff --git a/media-config-target-c4/hal/etc/pulse/device-map.json b/media-config-target-c4/hal/etc/pulse/device-map.json new file mode 100644 index 0000000..fe3f3a4 --- /dev/null +++ b/media-config-target-c4/hal/etc/pulse/device-map.json @@ -0,0 +1,16 @@ +{ + "device-types":[ + { + "device-type":"builtin-speaker", + "playback-devices":{"normal":"alsa:ALSA,0"} + } + ], + "device-files":{ + "playback-devices":[ + { + "device-string":"alsa:ALSA,0", + "role":{"normal":"mmap=0 tsched=0 rate=44100"} + } + ] + } +} diff --git a/media-config-target-c4/hal/etc/pulse/stream-map.json b/media-config-target-c4/hal/etc/pulse/stream-map.json new file mode 100644 index 0000000..164e49c --- /dev/null +++ b/media-config-target-c4/hal/etc/pulse/stream-map.json @@ -0,0 +1,191 @@ +{ + "latencies":[ + { + "type":"low", + "fragsize-ms":25, + "minreq-ms":-1, + "tlength-ms":100, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"mid", + "fragsize-ms":50, + "minreq-ms":-1, + "tlength-ms":200, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"high", + "fragsize-ms":75, + "minreq-ms":-1, + "tlength-ms":400, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"voip", + "fragsize-ms":20, + "minreq-ms":20, + "tlength-ms":100, + "prebuf-ms":0, + "maxlength":-1 + }, + { + "type":"default", + "fragsize-ms":50, + "minreq-ms":-1, + "tlength-ms":200, + "prebuf-ms":-1, + "maxlength":-1 + }, + { + "type":"default-async", + "fragsize-ms":50, + "minreq-ms":20, + "tlength-ms":200, + "prebuf-ms":0, + "maxlength":-1 + }, + ], + "volumes":[ + { + "type":"master", + "is-hal-volume":1 + }, + { + "type":"media", + "is-hal-volume":0 + }, + { + "type":"system", + "is-hal-volume":0 + }, + { + "type":"alarm", + "is-hal-volume":0 + }, + { + "type":"notification", + "is-hal-volume":0 + }, + { + "type":"voice", + "is-hal-volume":0 + }, + { + "type":"ringtone", + "is-hal-volume":0 + }, + { + "type":"voip", + "is-hal-volume":0 + }, + { + "type":"call", + "is-hal-volume":1 + } + ], + "streams":[ + { + "role":"media", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"media"}, + "avail-in-devices":["usb-audio","network"], + "avail-out-devices":["bt-a2dp","usb-audio","network","builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"] + }, + { + "role":"system", + "priority" : 2, + "route-type" : "auto", + "volume-types":{"in":"none","out":"system"}, + "avail-in-devices":["none"], + "avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"alarm", + "priority" : 4, + "route-type" : "auto-all", + "volume-types":{"in":"none","out":"alarm"}, + "avail-in-devices":["none"], + "avail-out-devices":["builtin-speaker","bt-a2dp","usb-audio"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"notification", + "priority" : 4, + "route-type" : "auto-all", + "volume-types":{"in":"none","out":"notification"}, + "avail-in-devices":["none"], + "avail-out-devices":["builtin-speaker","bt-a2dp","usb-audio"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"emergency", + "priority" : 4, + "route-type" : "auto", + "volume-types":{"in":"none","out":"none"}, + "avail-in-devices":["none"], + "avail-out-devices":["builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"voice-information", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"voice"}, + "avail-in-devices":["none"], + "avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"], + "avail-frameworks":["player","wav-player","tone-player","audio-io"] + }, + { + "role":"voice-recognition", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"none"}, + "avail-in-devices":["usb-audio"], + "avail-out-devices":["none"], + "avail-frameworks":["audio-io","webrtc"] + }, + { + "role":"voice-recognition-service", + "priority" : 3, + "route-type" : "auto", + "volume-types":{"in":"none","out":"none"}, + "avail-in-devices":["usb-audio"], + "avail-out-devices":["none"], + "avail-frameworks":["audio-io"] + }, + { + "role":"ringtone-voip", + "priority" : 5, + "route-type" : "auto-all", + "volume-types":{"in":"none","out":"ringtone"}, + "avail-in-devices":["none"], + "avail-out-devices":["bt-a2dp","builtin-speaker","usb-audio"], + "avail-frameworks":["player","wav-player","tone-player","audio-io","sound-manager"] + }, + { + "role":"voip", + "priority" : 5, + "route-type" : "manual", + "volume-types":{"in":"none","out":"voip"}, + "avail-in-devices":["usb-audio"], + "avail-out-devices":["builtin-speaker","usb-audio"], + "avail-frameworks":["audio-io","tone-player","sound-manager","webrtc"] + }, + { + "role":"ext-media", + "priority" : 3, + "route-type" : "manual-ext", + "volume-types":{"in":"none","out":"media"}, + "avail-in-devices":["usb-audio","network"], + "avail-out-devices":["bt-a2dp","usb-audio","network"], + "avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"] + }, + ] +} diff --git a/media-config-target-c4/hal/etc/pulse/system.pa b/media-config-target-c4/hal/etc/pulse/system.pa new file mode 100644 index 0000000..1cbca96 --- /dev/null +++ b/media-config-target-c4/hal/etc/pulse/system.pa @@ -0,0 +1,74 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +# This startup script is used only if PulseAudio is started in system +# mode. + +### Automatically load driver modules depending on the hardware available +### Load several protocols +load-module module-native-protocol-unix auth-anonymous=1 + +### Load module-tizenaudio-policy +load-module module-tizenaudio-policy + +#.ifexists module-udev-detect.so +load-module module-udev-detect +#.endif + +### Sound Player module +load-module module-sound-player +load-module module-tone-player +load-module module-role-ducking global=1 trigger_roles=solo/notification,voice-information ducking_roles=media,system,alarm,notification,voice-information,ext-media/media,ext-media volume=0%/25% fade_in=0/1000 fade_out=0/1000 + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + + +### Automatically restore the volume of streams and devices +#load-module module-stream-restore +#load-module module-device-restore + +### Automatically restore the default sink/source when changed by the user +### during runtime +### NOTE: This should be loaded as early as possible so that subsequent modules +### that look up the default sink/source get the right value +load-module module-default-device-restore + +.ifexists module-dbus-protocol.so +### If you want to allow TCP connections, set access to "remote" or "local,remote". +load-module module-dbus-protocol access=local +.endif + +### Automatically move streams to the default sink if the sink they are +### connected to dies, similar for sources +#load-module module-rescue-streams + +### Make sure we always have a sink around, even if it is a null sink. +load-module module-always-sink + +### Automatically suspend sinks/sources that become idle for too long +load-module module-suspend-on-idle timeout=1 + +load-sample camera-shutter-01 /usr/share/sounds/mm-camcorder/capture_shutter_01.ogg +load-sample camera-shutter-02 /usr/share/sounds/mm-camcorder/capture_shutter_02.ogg +load-sample recording-start /usr/share/sounds/mm-camcorder/recording_start_01.ogg +load-sample recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.ogg diff --git a/media-config-target-c4/hal/etc/xdg/gstomx.conf b/media-config-target-c4/hal/etc/xdg/gstomx.conf new file mode 100644 index 0000000..7a92953 --- /dev/null +++ b/media-config-target-c4/hal/etc/xdg/gstomx.conf @@ -0,0 +1,84 @@ +[omxmpeg2videodec] +type-name=GstOMXMPEG2VideoDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxmpeg4videodec] +type-name=GstOMXMPEG4VideoDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxh263dec] +type-name=GstOMXH263Dec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxh264dec] +type-name=GstOMXH264Dec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxmjpegdec] +type-name=GstOMXMJPEGDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role + +[omxvc1dec] +type-name=GstOMXWMVDec +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_decode +rank=257 +in-port-index=130 +out-port-index=131 +hacks=no-component-role +sink-template-caps=video/x-wmv,wmvversion=(int)3,format=(string){WMV3,WVC1},width=(int)[1,MAX],height=(int)[1,MAX] + +[omxh264enc] +type-name=GstOMXH264Enc +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.video_encode +rank=257 +in-port-index=200 +out-port-index=201 +hacks=no-component-role + +[omxanalogaudiosink] +type-name=GstOMXAnalogAudioSink +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.audio_render +rank=257 +in-port-index=100 +out-port-index=101 +hacks=no-component-role +sink-template-caps=audio/x-raw,format=(string){S16LE,S32LE},layout=(string)interleaved,rate=(int){8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000},channels=(int)[1,2] + +[omxhdmiaudiosink] +type-name=GstOMXHdmiAudioSink +core-name=/opt/vc/lib/libopenmaxil.so +component-name=OMX.broadcom.audio_render +rank=258 +in-port-index=100 +out-port-index=101 +hacks=no-component-role +sink-template-caps=audio/x-raw,format=(string){S16LE,S32LE},layout=(string)interleaved,rate=(int){8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000},channels=(int)[1,8];audio/x-ac3,framed=(boolean)true;audio/x-dts,framed=(boolean)true,block-size=(int){512,1024,2048} + diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf new file mode 100644 index 0000000..db78eb4 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf @@ -0,0 +1,62 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where an 'Aux' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 90 +name = analog-input + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf new file mode 100644 index 0000000..baf674a --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf @@ -0,0 +1,62 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where an 'FM' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 70 +name = analog-input-radio + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +.include analog-input.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf new file mode 100644 index 0000000..4be5722 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf @@ -0,0 +1,61 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where a 'Line' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 90 + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Line] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf new file mode 100644 index 0000000..f7f3085 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf @@ -0,0 +1,63 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where a 'Mic/Line' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 90 +name = analog-input + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common +.include analog-input-mic.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf new file mode 100644 index 0000000..2a36f2f --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf @@ -0,0 +1,63 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where a 'Mic' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 100 +name = analog-input-microphone + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common +.include analog-input-mic.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common new file mode 100644 index 0000000..b35e7af --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common @@ -0,0 +1,63 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Common element for all microphone inputs +; +; See analog-output.conf.common for an explanation on the directives + +;;; 'Mic Select' + +[Element Mic Select] +enumeration = select + +[Option Mic Select:Mic1] +name = input-microphone +priority = 20 + +[Option Mic Select:Mic2] +name = input-microphone +priority = 19 + +;;; Various Boosts + +[Element Mic Boost (+20dB)] +switch = select +volume = merge + +[Option Mic Boost (+20dB):on] +name = input-boost-on + +[Option Mic Boost (+20dB):off] +name = input-boost-off + +[Element Mic Boost] +switch = select +volume = merge + +[Option Mic Boost:on] +name = input-boost-on + +[Option Mic Boost:off] +name = input-boost-off + +[Element Front Mic Boost] +switch = select + +[Option Front Mic Boost:on] +name = input-boost-on + +[Option Front Mic Boost:off] +name = input-boost-off diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf new file mode 100644 index 0000000..8531ec7 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf @@ -0,0 +1,62 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where a 'TV Tuner' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 70 +name = analog-input-video + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +switch = off +volume = off + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf new file mode 100644 index 0000000..74c76f0 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf @@ -0,0 +1,61 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; For devices where a 'Video' element exists +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 70 + +[Element Capture] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +switch = off +volume = off + +[Element Line] +switch = off +volume = off + +[Element Aux] +switch = off +volume = off + +[Element Video] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic/Line] +switch = off +volume = off + +[Element TV Tuner] +switch = off +volume = off + +[Element FM] +switch = off +volume = off + +.include analog-input.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf new file mode 100644 index 0000000..5055f90 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf @@ -0,0 +1,54 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV +; Tuner/FM elements +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 100 + +[Element Capture] +required = volume +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Mic] +required-absent = any + +[Element Line] +required-absent = any + +[Element Aux] +required-absent = any + +[Element Video] +required-absent = any + +[Element Mic/Line] +required-absent = any + +[Element TV Tuner] +required-absent = any + +[Element FM] +required-absent = any + +.include analog-input.conf.common +.include analog-input-mic.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common new file mode 100644 index 0000000..951e11f --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common @@ -0,0 +1,294 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Mixer path for PulseAudio's ALSA backend, common elements for all +; input paths. If multiple options by the same id are discovered they +; will be suffixed with a number to distuingish them, in the same +; order they appear here. +; +; Source selection should use the following names: +; +; input -- If we don't know the exact kind of input +; input-microphone +; input-microphone-internal +; input-microphone-external +; input-linein +; input-video +; input-radio +; input-docking-microphone +; input-docking-linein +; input-docking +; +; We explicitly don't want to wrap the following sources: +; +; CD +; Synth/MIDI +; Phone +; Mix +; Digital/SPDIF +; Master +; PC Speaker +; +; See analog-output.conf.common for an explanation on the directives + +;;; 'Input Source Select' + +[Element Input Source Select] +enumeration = select + +[Option Input Source Select:Input1] +name = input +priority = 10 + +[Option Input Source Select:Input2] +name = input +priority = 5 + +;;; 'Input Source' + +[Element Input Source] +enumeration = select + +[Option Input Source:Mic] +name = input-microphone +priority = 20 + +[Option Input Source:Microphone] +name = input-microphone +priority = 20 + +[Option Input Source:Front Mic] +name = input-microphone +priority = 19 + +[Option Input Source:Front Microphone] +name = input-microphone +priority = 19 + +[Option Input Source:Internal Mic] +name = input-microphone +priority = 19 + +[Option Input Source:Line] +name = input-linein +priority = 18 + +[Option Input Source:Line-In] +name = input-linein +priority = 18 + +[Option Input Source:Line In] +name = input-linein +priority = 18 + +[Option Input Source:Docking-Station] +name = input-docking +priority = 17 + +[Option Input Source:AUX IN] +name = input +priority = 10 + +;;; 'Capture Source' + +[Element Capture Source] +enumeration = select + +[Option Capture Source:TV Tuner] +name = input-video + +[Option Capture Source:FM] +name = input-radio + +[Option Capture Source:Mic/Line] +name = input + +[Option Capture Source:Line/Mic] +name = input + +[Option Capture Source:Mic] +name = input-microphone + +[Option Capture Source:Microphone] +name = input-microphone + +[Option Capture Source:Int Mic] +name = input-microphone-internal + +[Option Capture Source:Int DMic] +name = input-microphone-internal + +[Option Capture Source:Internal Mic] +name = input-microphone-internal + +[Option Capture Source:iMic] +name = input-microphone-internal + +[Option Capture Source:i-Mic] +name = input-microphone-internal + +[Option Capture Source:Internal Microphone] +name = input-microphone-internal + +[Option Capture Source:Front Mic] +name = input-microphone + +[Option Capture Source:Front Microphone] +name = input-microphone + +[Option Capture Source:Rear Mic] +name = input-microphone + +[Option Capture Source:Mic1] +name = input-microphone + +[Option Capture Source:Mic2] +name = input-microphone + +[Option Capture Source:D-Mic] +name = input-microphone + +[Option Capture Source:IntMic] +name = input-microphone-internal + +[Option Capture Source:ExtMic] +name = input-microphone-external + +[Option Capture Source:Ext Mic] +name = input-microphone-external + +[Option Capture Source:E-Mic] +name = input-microphone-external + +[Option Capture Source:e-Mic] +name = input-microphone-external + +[Option Capture Source:LineIn] +name = input-linein + +[Option Capture Source:Analog] +name = input + +[Option Capture Source:Line] +name = input-linein + +[Option Capture Source:Line-In] +name = input-linein + +[Option Capture Source:Line In] +name = input-linein + +[Option Capture Source:Video] +name = input-video + +[Option Capture Source:Aux] +name = input + +[Option Capture Source:Aux0] +name = input + +[Option Capture Source:Aux1] +name = input + +[Option Capture Source:Aux2] +name = input + +[Option Capture Source:Aux3] +name = input + +[Option Capture Source:AUX IN] +name = input + +[Option Capture Source:Aux In] +name = input + +[Option Capture Source:AOUT] +name = input + +[Option Capture Source:AUX] +name = input + +[Option Capture Source:Cam Mic] +name = input-microphone + +[Option Capture Source:Digital Mic] +name = input-microphone + +[Option Capture Source:Digital Mic 1] +name = input-microphone + +[Option Capture Source:Digital Mic 2] +name = input-microphone + +[Option Capture Source:Analog Inputs] +name = input + +[Option Capture Source:Unknown1] +name = input + +[Option Capture Source:Unknown2] +name = input + +[Option Capture Source:Docking-Station] +name = input-docking + +[Option Capture Source:Dock Mic] +name = input-docking-microphone + +;;; 'Mic Jack Mode' + +[Element Mic Jack Mode] +enumeration = select + +[Option Mic Jack Mode:Mic In] +name = input-microphone + +[Option Mic Jack Mode:Line In] +name = input-linein + +;;; 'Digital Input Source' + +[Element Digital Input Source] +enumeration = select + +[Option Digital Input Source:Analog Inputs] +name = input + +[Option Digital Input Source:Digital Mic 1] +name = input-microphone + +[Option Digital Input Source:Digital Mic 2] +name = input-microphone + +;;; Various Boosts + +[Element Capture Boost] +switch = select + +[Option Capture Boost:on] +name = input-boost-on + +[Option Capture Boost:off] +name = input-boost-off + +[Element Auto Gain Control] +switch = select + +[Option Auto Gain Control:on] +name = input-agc-on + +[Option Auto Gain Control:off] +name = input-agc-off diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf new file mode 100644 index 0000000..f2fd31c --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf @@ -0,0 +1,82 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Path for mixers that have a 'Headphone2' control +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 89 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +; This profile path is intended to control the second headphones, not +; the first headphones. But it should not hurt if we leave the +; headphone jack enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone2] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Speaker] +switch = off +volume = off + +[Element Front] +switch = off +volume = off + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf new file mode 100644 index 0000000..2131cfe --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf @@ -0,0 +1,82 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Path for mixers that have a 'Headphone' control +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 90 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +[Element Headphone] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +; This profile path is intended to control the first headphones, not +; the second headphones. But it should not hurt if we leave the second +; headphone jack enabled nonetheless. +[Element Headphone2] +switch = mute +volume = zero + +[Element Speaker] +switch = off +volume = off + +[Element Front] +switch = off +volume = off + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf new file mode 100644 index 0000000..0a43e27 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lfe-on-mono.conf @@ -0,0 +1,85 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Intended for usage in laptops that have a seperate LFE speaker +; connected to the Master mono connector +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 40 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all-no-lfe +override-map.2 = all-left,all-right + +[Element Master Mono] +required = any +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +; This profile path is intended to control the speaker, not the +; headphones. But it should not hurt if we leave the headphone jack +; enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone2] +switch = mute +volume = zero + +[Element Speaker] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Front] +switch = off +volume = off + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf new file mode 100644 index 0000000..542edc4 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf @@ -0,0 +1,82 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Intended for usage on boards that have a seperate Mono output plug. +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 50 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = off +volume = off + +[Element Master Mono] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +; This profile path is intended to control the speaker, not the +; headphones. But it should not hurt if we leave the headphone jack +; enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone2] +switch = mute +volume = zero + +[Element Speaker] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Front] +switch = off +volume = off + +[Element Rear] +switch = off +volume = off + +[Element Surround] +switch = off +volume = off + +[Element Side] +switch = off +volume = off + +[Element Center] +switch = off +volume = off + +[Element LFE] +switch = off +volume = off + +.include analog-output.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf new file mode 100644 index 0000000..aea7853 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf @@ -0,0 +1,94 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Path for mixers that have a 'Speaker' control +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 100 + +[Element Hardware Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +; This profile path is intended to control the speaker, not the +; headphones. But it should not hurt if we leave the headphone jack +; enabled nonetheless. +[Element Headphone] +switch = mute +volume = zero + +[Element Headphone2] +switch = mute +volume = zero + +[Element Speaker] +required = any +switch = mute +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Front] +switch = mute +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Rear] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround] +switch = mute +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Side] +switch = mute +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Center] +switch = mute +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element LFE] +switch = mute +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +.include analog-output.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf new file mode 100644 index 0000000..fc30800 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf @@ -0,0 +1,92 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Intended for the 'default' output. Note that a-o-speaker.conf has a +; higher priority than this +; +; See analog-output.conf.common for an explanation on the directives + +[General] +priority = 99 + +[Element Hardware Master] +switch = ignore +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master] +switch = ignore +volume = ignore +override-map.1 = all +override-map.2 = all-left,all-right + +[Element Master Mono] +switch = off +volume = off + +; This profile path is intended to control the default output, not the +; headphones. But it should not hurt if we leave the headphone jack +; enabled nonetheless. +[Element Headphone] +switch = ignore +volume = zero + +[Element Headphone2] +switch = ignore +volume = zero + +[Element Speaker] +switch = ignore +volume = off + +[Element Front] +switch = ignore +volume = merge +override-map.1 = all-front +override-map.2 = front-left,front-right + +[Element Rear] +switch = ignore +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Surround] +switch = ignore +volume = merge +override-map.1 = all-rear +override-map.2 = rear-left,rear-right + +[Element Side] +switch = ignore +volume = merge +override-map.1 = all-side +override-map.2 = side-left,side-right + +[Element Center] +switch = ignore +volume = merge +override-map.1 = all-center +override-map.2 = all-center,all-center + +[Element LFE] +switch = ignore +volume = merge +override-map.1 = lfe +override-map.2 = lfe,lfe + +.include analog-output.conf.common diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common new file mode 100644 index 0000000..3204846 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common @@ -0,0 +1,128 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Common part of all paths + +; So here's generally how mixer paths are used by PA: PA goes through +; a mixer path file from top to bottom and checks if a mixer element +; described therein exists. If so it is added to the list of mixer +; elements PA will control, keeping the order it read them in. If a +; mixer element described here has set the required= or +; required-absent= directives a path might not be accepted as valid +; and is ignored in its entirety (see below). However usually if a +; element listed here is missing this one element is ignored but not +; the entire path. +; +; When a device shall be muted/unmuted *all* elements listed in a path +; file with "switch = mute" will be toggled. +; +; When a device shall change its volume, PA will got through the list +; of all elements with "volume = merge" and set the volume on the +; first element. If that element does not support dB volumes, this is +; where the story ends. If it does support dB volumes, PA divides the +; requested volume by the volume that was set on this element, and +; then go on to the next element with "volume = merge" and then set +; that there, and so on. That way the first volume element in the +; path will be the one that does the 'biggest' part of the overall +; volume adjustment, with the remaining elements usually being set to +; some value next to 0dB. This logic makes sure we get the full range +; over all volume sliders and a very high granularity of volumes +; already in hardware. +; +; All switches and enumerations set to "select" are exposed via the +; "port" functionality of sinks/sources. Basically every possible +; switch setting and every possible enumeration setting will be +; combined and made into a "port". So make sure you don't list too +; many switches/enums for exposing, because the number of ports might +; rise exponentially. +; +; Only one path can be selected at a time. All paths that are valid +; for an audio device will be exposed as "port" for the sink/source. + + +; [General] +; priority = ... # Priority for this path +; description = ... +; +; [Option ...:...] # For each option of an enumeration or switch element +; # that shall be exposed as a sink/source port. Needs to +; # be named after the Element, followed by a colon, followed +; # by the option name, resp. on/off if the element is a switch. +; name = ... # Logical name to use in the path identifier +; priority = ... # Priority if this is made into a device port +; +; [Element ...] # For each element that we shall control +; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available, +; # otherwise don't consider this path valid for the card +; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not +; # available, otherwise don't consider this path valid for the card +; +; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status, +; # always set it to off, always to on, or make it selectable as port. +; # If set to 'select' you need to define an Option section for on +; # and off +; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device +; # volume slider, always set it to the lowest value possible, or always +; # set it to 0 dB (for whatever that means) +; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable +; # via device ports. If set to 'select' you need to define an Option section +; # for each of the items you want to expose +; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be +; # set the direction of the PCM device is opened as. Generally this doesn't need to be set +; # unless you have a broken driver that has playback controls marked for capture or vice +; # versa +; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too? +; +; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel +; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels +; # Override maps should list for each element channel which high-level channels it controls via a +; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left", +; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of +; # channels in a mask + +[Element PCM] +switch = ignore +volume = merge +override-map.1 = all +override-map.2 = all-left,all-right + +[Element External Amplifier] +switch = select + +[Option External Amplifier:on] +name = output-amplifier-on +priority = 10 + +[Option External Amplifier:off] +name = output-amplifier-off +priority = 0 + +;;; 'Analog Output' + +[Element Analog Output] +enumeration = select + +[Option Analog Output:Speakers] +name = output-speaker +priority = 10 + +[Option Analog Output:Headphones] +name = output-headphones +priority = 9 + +[Option Analog Output:FP Headphones] +name = output-headphones +priority = 8 diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf new file mode 100644 index 0000000..9838138 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf @@ -0,0 +1,144 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Default profile definitions for the ALSA backend of PulseAudio. This +; is used as fallback for all cards that have no special mapping +; assigned. (and should be good enough for the vast majority of +; cards). Use the udev property PULSE_PROFILE_SET to assign a +; different profile set than this one to a device. So what is this +; about? Simply, what we do here is map ALSA devices to how they are +; exposed in PA. We say which ALSA device string to use to open a +; device, which channel mapping to use then, and which mixer path to +; use. This is encoded in a 'mapping'. Multiple of these mappings can +; be bound together in a 'profile' which is then directly exposed in +; the UI as a card profile. Each mapping assigned to a profile will +; result in one sink/source to be created if the profile is selected +; for the card. + +; [General] +; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate +; # them by combining every input mapping with every output mapping. +; +; [Mapping id] +; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. +; channel-map = ... # Channel mapping to use for this device +; description = ... +; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. +; # If multiple are found to be working they will be available as device ports +; paths-output = ... +; element-input = ... # Instead of configuring a full mixer path simply configure a single +; # mixer element for volume/mute handling +; element-output = ... +; priority = ... +; direction = any | input | output # Only useful for? +; +; [Profile id] +; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be +; # defined in this file too +; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be +; # defined in this file too +; description = ... +; priority = ... # Numeric value to deduce priority for this profile +; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile +; # will be assumed as working without probing. Makes initialization +; # a bit faster but only works if the card is really known well. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:0 +channel-map = mono +paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping analog-stereo] +device-strings = front:%f hw:0 +channel-map = left,right +paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono +priority = 7 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono +priority = 8 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono +priority = 7 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono +priority = 7 +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +priority = 5 + +[Mapping iec958-surround-40] +device-strings = iec958:%f +channel-map = front-left,front-right,rear-left,rear-right +priority = 1 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 3 +direction = output + +[Mapping hdmi-stereo] +device-strings = hdmi:%f +channel-map = left,right +priority = 4 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf new file mode 100644 index 0000000..2b83530 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf @@ -0,0 +1,91 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Native Instruments Audio 4 DJ +; +; This card has two stereo pairs of input and two stereo pairs of +; output, named channels A and B. Channel B has an additional +; Headphone connector. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-b-output] +description = Analog Stereo Channel B (Headphones) +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-b-input] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B (Headphones) +output-mappings = analog-stereo-a analog-stereo-b-output +input-mappings = analog-stereo-a analog-stereo-b-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a +input-mappings = analog-stereo-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B (Headphones) +output-mappings = analog-stereo-b-output +input-mappings = analog-stereo-b-input +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B (Headphones) +output-mappings = analog-stereo-b-output +priority = 6 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-b] +description = Analog Stereo Input Channel B +input-mappings = analog-stereo-b-input +priority = 1 +skip-probe = yes diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf new file mode 100644 index 0000000..3fe3cc5 --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf @@ -0,0 +1,162 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Native Instruments Audio 8 DJ +; +; This card has four stereo pairs of input and four stereo pairs of +; output, named channels A to D. Channel C has an additional Mic/Line +; connector, channel D an additional Headphone connector. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right + +# Since we want to set a different description for channel C's/D's input +# and output we define two seperate mappings for them +[Mapping analog-stereo-c-output] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = output + +[Mapping analog-stereo-c-input] +description = Analog Stereo Channel C (Line/Mic) +device-strings = hw:%f,0,2 +channel-map = left,right +direction = input + +[Mapping analog-stereo-d-output] +description = Analog Stereo Channel D (Headphones) +device-strings = hw:%f,0,3 +channel-map = left,right +direction = output + +[Mapping analog-stereo-d-input] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones) +output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output +input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-d+input:analog-stereo-c] +description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input +output-mappings = analog-stereo-d-output +input-mappings = analog-stereo-c-input +priority = 90 +skip-probe = yes + +[Profile output:analog-stereo-c-d+input:analog-stereo-c-d] +description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic) +output-mappings = analog-stereo-c-output analog-stereo-d-output +input-mappings = analog-stereo-c-input analog-stereo-d-input +priority = 80 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a +input-mappings = analog-stereo-a +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-b +input-mappings = analog-stereo-b +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-c+input:analog-stereo-c] +description = Analog Stereo Duplex Channel C (Line/Mic) +output-mappings = analog-stereo-c-output +input-mappings = analog-stereo-c-input +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-d+input:analog-stereo-d] +description = Analog Stereo Duplex Channel D (Headphones) +output-mappings = analog-stereo-d-output +input-mappings = analog-stereo-d-input +priority = 70 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 6 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-c] +description = Analog Stereo Output Channel C +output-mappings = analog-stereo-c-output +priority = 7 +skip-probe = yes + +[Profile output:analog-stereo-d] +description = Analog Stereo Output Channel D (Headphones) +output-mappings = analog-stereo-d-output +priority = 8 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-b] +description = Analog Stereo Input Channel B +input-mappings = analog-stereo-b +priority = 1 +skip-probe = yes + +[Profile input:analog-stereo-c] +description = Analog Stereo Input Channel C (Line/Mic) +input-mappings = analog-stereo-c-input +priority = 4 +skip-probe = yes + +[Profile input:analog-stereo-d] +description = Analog Stereo Input Channel D +input-mappings = analog-stereo-d-input +priority = 3 +skip-probe = yes diff --git a/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf new file mode 100644 index 0000000..6a8d08b --- /dev/null +++ b/media-config-target-c4/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf @@ -0,0 +1,127 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + +; Default profile definitions for the ALSA backend of PulseAudio. This +; is used as fallback for all cards that have no special mapping +; assigned (and should be good enough for the vast majority of +; cards). If you want to assign a different profile set than this one +; to a device, either set the udev property PULSE_PROFILE_SET for the +; card, or use the "profile_set" module argument when loading +; module-alsa-card. +; +; So what is this about? Simply, what we do here is map ALSA devices +; to how they are exposed in PA. We say which ALSA device string to +; use to open a device, which channel mapping to use then, and which +; mixer path to use. This is encoded in a 'mapping'. Multiple of these +; mappings can be bound together in a 'profile' which is then directly +; exposed in the UI as a card profile. Each mapping assigned to a +; profile will result in one sink/source to be created if the profile +; is selected for the card. +; +; Additionally, the path set configuration files can describe the +; decibel values assigned to the steps of the volume elements. This +; can be used to work around situations when the alsa driver doesn't +; provide any decibel information, or when the information is +; incorrect. + + +; [General] +; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate +; # them by combining every input mapping with every output mapping. +; +; [Mapping id] +; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. +; channel-map = ... # Channel mapping to use for this device +; description = ... +; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. +; # If multiple are found to be working they will be available as device ports +; paths-output = ... +; element-input = ... # Instead of configuring a full mixer path simply configure a single +; # mixer element for volume/mute handling +; element-output = ... +; priority = ... +; direction = any | input | output # Only useful for? +; +; [Profile id] +; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be +; # defined in this file too +; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be +; # defined in this file too +; description = ... +; priority = ... # Numeric value to deduce priority for this profile +; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile +; # will be assumed as working without probing. Makes initialization +; # a bit faster but only works if the card is really known well. +; +; [DecibelFix element] # Decibel fixes can be used to work around missing or incorrect dB +; # information from alsa. A decibel fix is a table that maps volume steps +; # to decibel values for one volume element. The "element" part in the +; # section title is the name of the volume element. +; # +; # NOTE: This feature is meant just as a help for figuring out the correct +; # decibel values. PulseAudio is not the correct place to maintain the +; # decibel mappings! +; # +; # If you need this feature, then you should make sure that when you have +; # the correct values figured out, the alsa driver developers get informed +; # too, so that they can fix the driver. +; +; db-values = ... # The option value consists of pairs of step numbers and decibel values. +; # The pairs are separated with whitespace, and steps are separated from +; # the corresponding decibel values with a colon. The values must be in an +; # increasing order. Here's an example of a valid string: +; # +; # "0:-40.50 1:-38.70 3:-33.00 11:0" +; # +; # The lowest step imposes a lower limit for hardware volume and the +; # highest step correspondingly imposes a higher limit. That means that +; # that the mixer will never be set outside those values - the rest of the +; # volume scale is done using software volume. +; # +; # As can be seen in the example, you don't need to specify a dB value for +; # each step. The dB values for skipped steps will be linearly interpolated +; # using the nearest steps that are given. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping usb-analog-stereo] +device-strings = hw:%f +channel-map = left,right +paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono +paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping usb-analog-surround-51] +device-strings = hw:%f +;channel-map = front-left,front-right,front-center,lfe,rear-left,rear-right +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-lfe-on-mono +priority = 180 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/packaging/media-config.spec b/packaging/media-config.spec index f6ea011..fd78871 100644 --- a/packaging/media-config.spec +++ b/packaging/media-config.spec @@ -1,6 +1,6 @@ Name: media-config Summary: Multimedia Framework system configuration package -Version: 0.3.8 +Version: 0.3.9 Release: 0 Group: Multimedia/Configuration License: LGPL-2.1 and Apache-2.0 @@ -69,6 +69,13 @@ License: LGPL-2.1 and Apache-2.0 %description target-qrb2210 Multimedia Framework system configuration package including ini, conf and etc files for QRB2210 target. +%package target-c4 +Summary: Multimedia Framework system configuration package for ODROID-C4 +Group: Multimedia/Configuration +License: LGPL-2.1 and Apache-2.0 + +%description target-c4 +Multimedia Framework system configuration package including ini, conf and etc files for ODROID-C4 %else @@ -139,6 +146,11 @@ cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-qrb2210 mkdir -p %{buildroot}%{_hal_datadir}/%{name}-target-qrb2210 cp -arf %{name}-target-qrb2210/* %{buildroot}%{_hal_datadir}/%{name}-target-qrb2210 +mkdir -p %{buildroot}%{_hal_licensedir}/%{name}-target-c4 +cp LICENSE.APLv2.0 %{buildroot}%{_hal_licensedir}/%{name}-target-c4 +cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-c4 +mkdir -p %{buildroot}%{_hal_datadir}/%{name}-target-c4 +cp -arf %{name}-target-c4/* %{buildroot}%{_hal_datadir}/%{name}-target-c4 %else @@ -181,6 +193,9 @@ rm -rf %{_hal_datadir}/%{name}-target-rb5 cp -arf %{_hal_datadir}/%{name}-target-qrb2210/* / rm -rf %{_hal_datadir}/%{name}-target-qrb2210 +%post target-c4 +cp -arf %{_hal_datadir}/%{name}-target-c4/* / +rm -rf %{_hal_datadir}/%{name}-target-c4 %else @@ -299,6 +314,22 @@ rm -rf %{_hal_datadir}/%{name}-simulator %{_hal_datadir}/%{name}-target-qrb2210%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.common %{_hal_datadir}/%{name}-target-qrb2210%{_hal_datadir}/pulseaudio/alsa-mixer/profile-sets/*.conf +%files target-c4 +%manifest %{name}-target-c4.manifest +%{_hal_licensedir}/%{name}-target-c4/* +%defattr(-,root,root,-) +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/asound.conf +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/pulse/* +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/murphy/* +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/multimedia/*.ini +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/inference/*.ini +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/multimedia/*.conf +%{_hal_datadir}/%{name}-target-c4%{_hal_sysconfdir}/xdg/gstomx.conf +%{_hal_datadir}/%{name}-target-c4%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.conf +%{_hal_datadir}/%{name}-target-c4%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.common +%{_hal_datadir}/%{name}-target-c4%{_hal_datadir}/pulseaudio/alsa-mixer/profile-sets/*.conf + + %else %files simulator -- cgit v1.2.3