[artik10/rpi3-spk] remove unused artik10 / rpi3-spk

[Version] 0.3.65
[Issue type] Cleanup

Change-Id: Id48d730eada19aa2464bfb562505944f7ab8db96

192 files changed, 1 insertions, 16425 deletions

diff --git a/media-config-target-artik10.manifest b/media-config-target-artik10.manifest
deleted file mode 100644
index a76fdba..0000000
--- a/media-config-target-artik10.manifest
+++ /dev/null
@@ -1,5 +0,0 @@
-<manifest>
-	<request>
-		<domain name="_" />
-	</request>
-</manifest>
diff --git a/media-config-target-artik10/hal/etc/asound.conf b/media-config-target-artik10/hal/etc/asound.conf
deleted file mode 100644
index acaf318..0000000
--- a/media-config-target-artik10/hal/etc/asound.conf
+++ /dev/null
@@ -1,11 +0,0 @@
-# default sound configuration
-
-pcm. !default {
-	type hw
-	card 0
-}
-
-ctl. !default {
-	type hw
-	card 0
-}
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_audio_pcm_dump.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_audio_pcm_dump.ini
deleted file mode 100644
index 6e13b68..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_audio_pcm_dump.ini
+++ /dev/null
@@ -1,8 +0,0 @@
-[pcm_dump]
-;playback
-pa_sink = 0
-pa_sink_input = 0
-
-;capture
-pa_source = 0
-pa_source_output = 0
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_audio_volume.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_audio_volume.ini
deleted file mode 100644
index ae7e635..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_audio_volume.ini
+++ /dev/null
@@ -1,19 +0,0 @@
-[volumes]
-system                         = 0, 72, 73, 74, 75, 76, 77, 78, 80, 81, 82, 84, 86, 88, 90, 94
-notification                   = 0, 68, 70, 72, 73, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 97
-alarm                          = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92
-ringtone                       = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92
-media                          = 0, 46, 50, 53, 58, 62, 68, 72, 76, 80, 84, 87, 90, 93, 96, 100
-call                           = 60, 65, 70, 76, 82, 88, 94, 100
-voip                           = 60, 65, 70, 76, 82, 88, 94, 100
-voice                          = 0, 55, 58, 61, 64, 67, 70, 75, 78, 82, 86, 89, 91, 94, 97, 100
-gain_dialer                    = 1.00
-gain_touch                     = 1.00
-gain_af                        = 0.70
-gain_shutter1                  = 0.14
-gain_shutter2                  = 1.00
-gain_camcording                = 0.30
-gain_midi                      = 1.00
-gain_booting                   = 0.40
-gain_video                     = 0.90
-gain_tts                       = 1.00
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_camcorder.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_camcorder.ini
deleted file mode 100644
index c2ca196..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_camcorder.ini
+++ /dev/null
@@ -1,103 +0,0 @@
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1.  General
-; 2.  VideoInput
-; 3.  AudioInput
-; 4.  VideoOutput
-; 5.  Capture
-; 6.  Record
-; 7.  VideoEncoder
-; 8.  AudioEncoder
-; 9.  ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-; LogLevel(default:3)
-;;; 0:Critical, 1: Error, 2: Warning, 3: Info, 4: Debug, 5: Verbose
-LogLevel = 3
-
-[VideoInput]
-VideosrcElement = v4l2src | 1,0 | do-timestamp,1
-UseVideoscale = 0
-UseZeroCopyFormat = 0
-DeviceCount = 1
-SupportMediaPacketPreviewCb = 1
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1
-AudiomodemsrcElement = pulsesrc | 1,0 | do-timestamp,1
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = tizenwlsink | 7,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0 | use-tbm,0
-VideosinkElementRemote = tizenipcsink | 4,0 | permissions,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoscale = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-UseVideoconvert = 1
-VideoconvertElement = videoconvert | 0,0
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-
-[Capture]
-; CaptureMode
-;;; 0: Encodebin, 1: Camera control(plugin), 2: Image pad(plugin)
-CaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = 3gppmux | 0,0
-AMR = avmux_amr | 0,0
-MP4 = mp4mux | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_camcorder_camera0.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_camcorder_camera0.ini
deleted file mode 100644
index 607ab82..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_camcorder_camera0.ini
+++ /dev/null
@@ -1,207 +0,0 @@
-; < Camera/Camcorder Configure Control INI file >
-;
-; - Header List -
-; 1.  Camera
-; 2.  Strobe
-; 3.  Effect
-; 4.  Photograph
-; 5.  Capture
-; 6.  Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = 0,-255 || 0
-DeviceName = S5K5EA
-PreviewResolution = 640,480 | 1280,720 | 1280,960 || 1280,720
-CaptureResolution = 640,480 | 1280,720 | 1280,960 | 2560,1440 || 1280,720
-VideoResolution = 640,480 | 1280,720 | 1280,960 || 640,480
-FPS0 = 15,30 || 15
-FPS1 = 15,30 || 15
-FPS2 = 15 || 15
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
-PictureFormat = 7 || 7
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 3
-; Recommend preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
-RecommendPreviewFormatCapture = 7
-; Recommend preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
-RecommendPreviewFormatRecord = 7
-; Recommend preview resolution
-;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9), 2: SQUARE ratio(1:1)
-RecommendPreviewResolution = 1280,960 | 1280,720 | 1280,960 || 1280,720
-; Camera facing direction
-;;; 0:REAR, 1:FRONT
-FacingDirection = 0
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,-255,-255,-255,-255,-255,-255,-255 || 1
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-;Brightness = 0,8 || 4
-;Contrast = 1,7 || 4
-;Saturation = 0,4 || 2
-;Sharpness = 0,4 || 2
-
-; White balance - real setting value
-;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Color tone - real setting value
-;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM
-;;; 11:VINTAGE_COLD, 12:SOLARIZE, 13:POSTERIZE, 14:POINT_BLUE, 15:POINT_RED_YELLOW, 16:POINT_COLOR_3, 17:POINT_GREEN, 18:POINT_RED, 19:POINT_YELLOW, 20:CARTOONIZE
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED,
-;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW
-ColorTone = 1,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 1
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 0:OFF, 1:ON
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 0,-255,-255 || 0
-
-; Part color mode - real setting value
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-; Part color mode - MSL value(convert array index)
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-;PartColorMode = 0,1,2 || 0
-
-; Part color - real setting value
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-; Part color - MSL value(convert array index)
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-;DigitalZoom = 0,10 || 0
-;OpticalZoom = 0,0 || 0
-
-; Focus mode - real setting value
-;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = 0,-255,-255,-255,-255,-255 || 0
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = 0,-255,-255,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1  3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0
-
-;ExposureValue - Not support
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
-;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Anti-handshake - real setting value
-;;; 0:OFF, 1:ON
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-AntiHandshake = 0,-255,-255,-255 || 0
-
-; Video-stabilization - real setting value
-;;; 0:OFF, 1:ON
-; Video-stabilization - MSL value(convert array index)
-;;; 0:OFF, 1:ON
-VideoStabilization = 0 || 0
-
-; Face zoom mode
-;;; 0:OFF, 1:ON
-FaceZoomMode = 0 || 0
-; Face zoom level
-FaceZoomLevel = 0,0 || 0
-
-; PTZ(Pan Tilt Zoom) type
-;;; 0:Mechanical, 1:Electronic
-;PtzType = 0,1 || 1
-
-; Pan range for mechanical movement
-;PanMecha = -10,10
-
-; Pan range for electronic movement
-;PanElec = -10,10
-
-; Tilt range for mechanical movement
-;TiltMecha = -10,10
-
-; Tilt range for electronic movement
-;TiltElec = -10,10
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-OutputMode = 7,13 || 13
-JpegQuality = 1,100 || 95
-MultishotNumber = 1,1 || 1
-SensorEncodedCapture = 0
-; Support HDR
-;;; 0: OFF, 1: ON, 2: ON and Original
-SupportHDR = 0,-255,-255 || 0
-
-
-[Detect]
-; Detect mode
-;;; 0:OFF, 1:ON
-DetectMode = 0,-255 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_image_util.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_image_util.ini
deleted file mode 100644
index 445703c..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_image_util.ini
+++ /dev/null
@@ -1,4 +0,0 @@
-[jpeg-xl]
-; num of threads for jpeg-xl image format
-decoding_threads=4
-encoding_threads=3
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_codec.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_media_codec.ini
deleted file mode 100644
index 9f2a5dd..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_codec.ini
+++ /dev/null
@@ -1,89 +0,0 @@
-[h261]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = , ,
-sw_encoder = , ,
-
-[h263]
-hw_decoder = omxdec_h263, video/x-h263, NV12
-hw_encoder = omxenc_h263, video/x-raw,  H263
-sw_decoder = avdec_h263,   video/x-h263, I420
-sw_encoder = avenc_h263,   video/x-raw,  H263
-
-[h264]
-hw_decoder = omxdec_h264, video/x-h264, NV12
-hw_encoder = omxenc_h264, video/x-raw,  H264_SP
-sw_decoder = avdec_h264,   video/x-h264, I420
-sw_encoder = avenc_h264,   video/x-raw,  H264_SP
-
-[mpeg4]
-hw_decoder = omxdec_mpeg4, video/mpeg, NV12
-hw_encoder = omxenc_mpeg4, video/x-raw,  MPEG4_SP
-sw_decoder = avdec_mpeg4,   video/mpeg, I420
-sw_encoder = avenc_mpeg4,   video/x-raw,  MPEG4_SP
-
-[aac_lc]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_aac,   audio/mpeg, PCM_F32LE
-sw_encoder = avenc_aac,   audio/x-raw, AAC_LC
-
-[aac_he]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_aac,   audio/mpeg, PCM_F32LE
-sw_encoder = , ,
-
-[aac_he_ps]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_aac,   audio/mpeg, PCM_F32LE
-sw_encoder = , ,
-
-[mp3]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_mp3,   audio/mpeg, PCM_F32LE
-sw_encoder = , ,
-
-[amr_nb]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_amrnb,   audio/AMR, PCM_F32LE
-sw_encoder = amrnbenc, audio/x-raw, AMR_NB
-
-[amr_wb]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_amrwb,   audio/AMR-WB, PCM_F32LE
-sw_encoder = , ,
-
-[vorbis]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = vorbisdec,   audio/x-vorbis, PCM_F32LE
-sw_encoder = , ,
-
-[flac]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_flac,   audio/x-flac, PCM_F32LE
-sw_encoder = , ,
-
-[wmav1]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_wmav1,   audio/x-wma, PCM_F32LE
-sw_encoder = , ,
-
-[wmav2]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_wmav2,   audio/x-wma, PCM_F32LE
-sw_encoder = , ,
-
-[wmapro]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_wmapro,   audio/x-wma, PCM_F32LE
-sw_encoder = , ,
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_editor.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_media_editor.ini
deleted file mode 100644
index 1475618..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_editor.ini
+++ /dev/null
@@ -1,20 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot path = /tmp
-
-; | separated list of arguments that will pass to gst_init
-gstreamer arguments = --gst-disable-registry-update|--gst-disable-registry-fork|--gst-disable-segtrap|--gst-debug=*ges*:3,2
-
-[encoder]
-container = ogg
-audio hw encoder =
-video hw encoder =
-
-[decoder]
-audio hw decoder =
-video hw decoder =
-
-[resource acquisition]
-video encoder = no
-video decoder = no
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_streamer.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_media_streamer.ini
deleted file mode 100644
index 34566de..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_streamer.ini
+++ /dev/null
@@ -1,124 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot dir =
-
-; decodebin will be used instead of decoder node
-use decodebin = yes
-
-; comma separated list of element names which
-; will not be used in autoplug mode
-exclude elements = v4l2video,v4l2h264,v4l2mpeg4,omx,sprd,nxvideo
-
-; comma separated list of element names which
-; will require resources in autoplug mode
-resource elements = omx,sprd
-
-; comma separated list of arguments
-; that will pass to gst_init
-gstreamer arguments = --gst-debug=2
-
-
-;MEDIA_STREAMER_NODE_TYPE_SRC
-[node type 1]
-audio capture = pulsesrc
-video capture = waylandsrc
-camera = v4l2src
-
-;MEDIA_STREAMER_NODE_TYPE_SINK
-[node type 2]
-audio = pulsesink
-overlay = tizenwlsink
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_ENCODER
-[node type 3]
-video/x-h263 = avenc_h263
-;video/x-h264 =
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_DECODER
-[node type 4]
-video/x-h263 = avdec_h263
-;video/x-h264 =
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_ENCODER
-[node type 5]
-audio/AMR = amrnbenc
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_DECODER
-[node type 6]
-audio/AMR = amrnbdec
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_CONVERTER
-[node type 7]
-video/x-raw = videoconvert
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_CONVERTER
-[node type 8]
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_RESAMPLE
-[node type 9]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_PAY
-[node type 10]
-video/x-h263 = rtph263pay
-;video/x-h264 =
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_PAY
-[node type 11]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_DEPAY
-[node type 12]
-video/x-h263 = rtph263depay
-video/x-h264 = rtph264depay
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_DEPAY
-[node type 13]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_RATE
-[node type 14]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_SCALE
-[node type 15]
-
-;MEDIA_STREAMER_NODE_TYPE_TEXT_OVERLAY
-[node type 16]
-text/x-raw = textoverlay
-
-;MEDIA_STREAMER_NODE_TYPE_PARSER
-[node type 17]
-video/x-h263 = h263parse
-video/x-h264 = h264parse
-
-;MEDIA_STREAMER_NODE_TYPE_FILTER
-[node type 18]
-
-;MEDIA_STREAMER_NODE_TYPE_TEE
-[node type 19]
-
-;MEDIA_STREAMER_NODE_TYPE_QUEUE
-[node type 20]
-
-;MEDIA_STREAMER_NODE_TYPE_MQUEUE
-[node type 21]
-
-;MEDIA_STREAMER_NODE_TYPE_MUXER
-[node type 22]
-
-;MEDIA_STREAMER_NODE_TYPE_DEMUXER
-[node type 23]
-
-;MEDIA_STREAMER_NODE_TYPE_RTP
-[node type 24]
-
-;MEDIA_STREAMER_NODE_TYPE_INPUT_SELECTOR
-[node type 25]
-
-;MEDIA_STREAMER_NODE_TYPE_OUTPUT_SELECTOR
-[node type 26]
-
-;MEDIA_STREAMER_NODE_TYPE_INTERLEAVE
-[node type 27]
-
-;MEDIA_STREAMER_NODE_TYPE_DEINTERLEAVE
-[node type 28]
-
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_transporter.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_media_transporter.ini
deleted file mode 100644
index 504d385..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_media_transporter.ini
+++ /dev/null
@@ -1,118 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot path = /tmp
-
-; enable verbose logging
-verbose log = no
-
-; | separated list of arguments that will pass to gst_init
-gstreamer arguments = --gst-debug=*:2
-
-; comma separated list of elements that will not use in the gstreamer pipeline
-gstreamer excluded elements =
-
-; allowed timeout for changing pipeline state
-timeout = 10 ; sec
-
-[connection]
-rtsp server ip = 127.0.0.1
-rtsp server port = 8554
-rtsp server mount point = /mtpr_server/tmp
-
-[media source]
-; default values for video source pipeline (e.g, videotest, camera, screen)
-video raw format = I420
-video width = 320
-video height = 240
-video framerate = 30
-video codec = mpeg
-video hw encoder element =
-video encoded format support = no
-video drc support = no
-; default values for audio source pipeline (e.g, audiotest, mic)
-audio raw format = F32LE
-audio samplerate = 8000
-audio channels = 2
-audio codec = aac
-audio hw encoder element =
-
-[source videotest]
-source element = videotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1,pattern=18
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codec =
-;video hw encoder element =
-;video encoded format support =
-video drc support = yes
-
-
-[source camera]
-source element = v4l2src
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codec = h264
-;video hw encoder element = v4l2h264enc
-;video encoded format support =
-;video drc support =
-
-
-[source screen]
-source element = waylandsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codec =
-;video hw encoder element =
-;video encoded format support =
-;video drc support =
-
-
-[source audiotest]
-source element = audiotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codec =
-;audio hw encoder element =
-use ulpfec red = no
-
-
-[source mic]
-source element = pulsesrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codec =
-;audio hw encoder element =
-use ulpfec red = no
-
-
-[rendering sink]
-audio sink element = pulsesink
-video sink element = tizenwlsink
-
-; comma separated list of elements, it should be one by one per codec type
-audio hw decoder elements =
-video hw decoder elements =
-
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_player.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_player.ini
deleted file mode 100644
index ff5b3b9..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_player.ini
+++ /dev/null
@@ -1,102 +0,0 @@
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = tizenwlsink
-videosink element fake = fakesink
-video converter element =
-
-; decoder element keyword for resource management.
-video codec element hw = nxvideodec
-video codec element sw = avdec
-video codec default type = hw ; hw or sw
-
-audio codec element hw =
-audio codec element sw = avdec
-audio codec default type = sw ; hw or sw
-
-; support with HW audio codec
-support audio effect = no
-support pcm exporting = no
-support pitch control = no
-support replaygain control = no
-
-audiosink element = pulsesink
-
-; audio offload information
-audio offload sink element =
-audio offload device type =    ; builtin-speaker,bt-a2dp,audio-jack,usb-audio from pulse stream-map
-audio offload media format =   ; Use the format keyword of media_format_mimetype_e, MAX:10
-
-; supported input format of external media source stream
-; Use the format keyword of media_format_mimetype_e, MAX:10
-media stream input format = AAC,H264_SP,H264_MP,H264_HP
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-; this works if 'use decodebin = yes'
-element exclude keyword = v4l2,omx
-
-; comma separated list of tocken
-; this works if 'use decodebin = yes'
-unsupported codec keyword = divx
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-; max num of bo for sw codec
-video bo max = 10
-
-; video bo timeout (sec)
-video bo timeout = 10
-
-; setup pipeline with decodebin2
-use decodebin = no
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-http buffering limit = 99.0 ; percent
-
-; if yes, use file for buffering.
-; if no, use memory for buffering.
-http use file buffer = no
-
-; ring buffer size when use mem buffer
-http ring buffer size = 20971520 ; 20MBytes
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_player_audio_effect.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_player_audio_effect.ini
deleted file mode 100644
index 1394608..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_player_audio_effect.ini
+++ /dev/null
@@ -1,17 +0,0 @@
-[audio effect]
-; name of audio effect element
-audio effect element = audioeq
-
-; preset audio effect setting
-audio effect preset = no
-
-; custom audio effect setting (EQ/extension)
-audio effect custom = yes
-audio effect custom list = 0
-
-audio effect custom eq band num = 7 ; number of EQ bands
-audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz)
-audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz)
-
-audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect)
-audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect)
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_resource_manager.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_resource_manager.ini
deleted file mode 100644
index 082f297..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_resource_manager.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[max volume]
-video_overlay = -1
-video_decoder = -1
-video_encoder = -1
-camera = -1
-
-[priority]
-media = 10
-interrupt = 99
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_streamrecorder.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_streamrecorder.ini
deleted file mode 100644
index 2888707..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_streamrecorder.ini
+++ /dev/null
@@ -1,81 +0,0 @@
-[general]
-;is encsink source is live
-encscink source is live = 0
-
-retrialcount = 10
-
-minimum frame = 5
-
-reset pause time = 0
-
-screen record = 1
-
-convert output buffer num = 6
-
-hw encoder supported = 0 ; 1 if supported and 'video codec element hw' should be formed.
-
-video codec element hw = ; sprd (if verified) or verified hw codec element
-
-[encodebin]
-;MM_STREAMRECORDER_ENCBIN_PROFILE_VIDEO = 0 MM_STREAMRECORDER_ENCBIN_PROFILE_AUDIO = 1
-;MM_STREAMRECORDER_ENCBIN_PROFILE_IMAGE = 2 MM_STREAMRECORDER_ENCBIN_PROFILE_NUM = 3
-encsink bin profile = 0
-
-encsink bin auto audio resample = 0
-
-encsink bin auto colorspace = 1
-
-encsink bin auto audio convert = 1
-
-encsink bin use video toggle = 0
-
-[pipeline]
-encsink bin source = appsrc
-
-name of audio src = pulsesrc
-
-h264 encoder =
-
-h263 encoder = avenc_h263p
-
-mpeg4 encoder = avenc_mpeg4
-
-name of audio encoder = avenc_aac
-
-use parser  =
-
-name of 3GP muxer = avmux_3gp
-
-name of MP4 muxer = avmux_mp4
-
-name of video converter = videoconvert
-
-name of sink = filesink
-
-[video param]
-;/*ms*/
-video frame wait time = 200000
-
-[audio param]
-audio frame minimum space = 102400
-
-audio frame wait time = 20000
-
-[attribute]
-supported height = 1080,720,480,240,288,144
-
-supported width = 1920,1280,640,320,352,176
-
-;/*AMR, AAC, VORBIS ,PCM*/
-supported audio encoders = AMR,AAC,PCM
-
-;/* H263 , H264 , MPEG4 */
-supported video encoders = H263,MPEG4
-
-;/*3GP , AMR, MP4 , WAV, ADTS*/
-supported file formats = 3GP,MP4,AMR,ADTS,WAV
-
-[debug]
-; generating dot file representing pipeline state
-; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell (also do export to '/etc/profile.d/mmf.sh')
-generate dot = no
diff --git a/media-config-target-artik10/hal/etc/multimedia/mmfw_webrtc.ini b/media-config-target-artik10/hal/etc/multimedia/mmfw_webrtc.ini
deleted file mode 100644
index 410ae9c..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mmfw_webrtc.ini
+++ /dev/null
@@ -1,169 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot path = /tmp
-
-; the period(sec) of printing stats logs (0 to disable it)
-stats log period = 0
-
-; enable verbose logging
-verbose log = no
-
-; enable nice verbose logging
-nice verbose = no
-
-; enable network simulator
-network simulator = no
-
-; dump streams into files
-dump incoming streams = no
-dump path = /tmp
-
-; | separated list of arguments that will pass to gst_init
-gstreamer arguments = --gst-debug=webrtc*:7,3
-
-; comma separated list of elements that will not use in the gstreamer pipeline
-gstreamer excluded elements =
-
-; latency of RTP jitterbuffer
-rtp jitterbuffer latency = 100
-
-; SDP bundle policy (0:none, 1:balanced(not supported yet), 2:max compat(not supported yet), 3:max bundle)
-bundle policy = 3
-
-; default STUN server URL
-;stun server = stun://stun.l.google.com:19302
-
-
-[media source]
-; default values for video source pipeline (e.g, videotest, camera, screen)
-video raw format = I420
-video width = 320
-video height = 240
-video framerate = 30
-; comma separated list of default supported video codecs, the first one is default value.
-video codecs = vp8,vp9
-video hw encoder element =
-video encoded format support = no
-video drc support = no
-; default values for audio source pipeline (e.g, audiotest, mic)
-audio raw format = S16LE
-audio samplerate = 8000
-audio channels = 1
-; comma separated list of default supported audio codecs, the first one is default value.
-audio codecs = opus,pcmu,pcma
-audio hw encoder element =
-; default FEC setting of RTP packets
-use ulpfec red = no
-fec percentage = 100
-; default in-band FEC setting (only supported by opusenc/opusdec)
-use inbandfec = no
-packet loss percentage = 10
-
-
-[source videotest]
-source element = videotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1,pattern=18
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codecs =
-;video hw encoder element =
-;video encoded format support =
-video drc support = yes
-use ulpfec red = yes
-
-
-[source camera]
-source element = v4l2src
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codecs =
-;video hw encoder element =
-;video encoded format support =
-;video drc support =
-use ulpfec red = yes
-
-
-[source screen]
-source element = waylandsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codecs =
-;video hw encoder element =
-;video encoded format support =
-;video drc support =
-use ulpfec red = yes
-
-
-[source audiotest]
-source element = audiotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codecs =
-;audio hw encoder element =
-use inbandfec = yes
-
-
-[source mic]
-source element = pulsesrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codecs =
-;audio hw encoder element =
-use inbandfec = yes
-
-
-[source null]
-audio codecs = opus,pcmu,pcma
-video codecs = vp8,vp9,h264
-
-
-[rendering sink]
-audio sink element = pulsesink
-video sink element = tizenwlsink
-
-; comma separated list of elements, it should be one by one per codec type
-audio hw decoder elements =
-video hw decoder elements =
-
-evas native surface tbm format = I420
-
-
-[resource acquisition]
-camera = no
-video encoder = no
-video decoder = no
-video overlay = no
-
-
-[vpxenc params]
-;threads =
-;end usage =
-;cpu used =
-;target bitrate =
-;keyframe max dist =
-;min quantizer =
-;max quantizer =
-;undershoot =
diff --git a/media-config-target-artik10/hal/etc/multimedia/mused.conf b/media-config-target-artik10/hal/etc/multimedia/mused.conf
deleted file mode 100644
index 38e07b8..0000000
--- a/media-config-target-artik10/hal/etc/multimedia/mused.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-[muse]
-; The 'hosts' parameter defines the modules,
-; which the user would like to connect to the muse.
-; If you want to add host, then write manually.
-hosts=player, camera, recorder
-logfile=/var/log/mused/muse-server
-lockfile=/tmp/.muse_core.lock
-min_timeout=5
-max_timeout=90
-;100MB=100000
-memory_threshold=100000
-enable_watch_external_storage=1
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1=--gst-debug=*:2
-gstparam2=--gst-disable-segtrap
-gstparam3=
-gstparam4=
-gstparam5=
-gstparam6=
-gstparam7=
-gstparam8=
-gstparam9=
-gstparam10=
-
-; gstparam#=--gst-plugin-load=/usr/lib/gstreamer-1.0/libgstcoreelements.so'
-; can be substituted with gstpreload=coreelements'
-gstpreload=
-
-[player]
-; The 'player' parameter represents the muse-player.
-; This module recovers the "capi-media-player".
-path=libmuse-player.so
-preloaded=no
-timeout=60
-disable_watchdog_api=-1
-;unlimited=-1
-max_instance=-1
-caution_instance=-1
-
-[camera]
-; The 'camera' parameter represents the muse-camera.
-; This module recovers the "capi-media-camera".
-path=libmuse-camera.so
-preloaded=no
-timeout=10
-;api 2 is camera_dispatcher_start_preview
-disable_watchdog_api=2
-;unlimited=-1
-max_instance=-1
-caution_instance=-1
-
-[recorder]
-; The 'recorder' parameter represents the muse-recorder.
-; This module recovers the "capi-media-recorder".
-; This one should be paired with the 'camera' module.
-path=libmuse-recorder.so
-preloaded=no
-timeout=10
-;api 5 is recorder_start
-disable_watchdog_api=5
-;unlimited=-1
-max_instance=-1
-caution_instance=-1
-
diff --git a/media-config-target-artik10/hal/etc/murphy/murphy.lua b/media-config-target-artik10/hal/etc/murphy/murphy.lua
deleted file mode 100644
index 9675961..0000000
--- a/media-config-target-artik10/hal/etc/murphy/murphy.lua
+++ /dev/null
@@ -1,99 +0,0 @@
-m = murphy.get()
-
--- load the dlog plugin
-m:try_load_plugin('dlog')
-
--- load the console plugin
--- m:try_load_plugin('console')
-
--- load the dbus plugin
--- if m:plugin_exists('dbus') then
---    m:load_plugin('dbus')
--- end
-
--- load the native resource plugin
-if m:plugin_exists('resource-native') then
-    m:load_plugin('resource-native')
-    m:info("native resource plugin loaded")
-else
-    m:info("No native resource plugin found...")
-end
-
--- load the dbus resource plugin
-m:try_load_plugin('resource-dbus', {
-    dbus_bus = "system",
-    dbus_service = "org.Murphy",
-    dbus_track = true,
-    default_zone = "driver",
-    default_class = "implicit"
-})
-
--- load the domain control plugin
-if m:plugin_exists('domain-control') then
-    m:load_plugin('domain-control')
-else
-    m:info("No domain-control plugin found...")
-end
-
-if m:plugin_exists('glib') then
-    m:load_plugin('glib')
-else
-    m:info("No glib plugin found...")
-end
-
--- define application classes
-application_class {
-    name     = "interrupt",
-    priority = 99,
-    modal    = false,
-    share    = false,
-    order    = "fifo"
-}
-
-application_class {
-    name     = "media",
-    priority = 10,
-    modal    = false,
-    share    = false,
-    order    = "lifo"
-}
-
--- define zone attributes
-zone.attributes {
-    type = {mdb.string, "common", "rw"},
-    location = {mdb.string, "anywhere", "rw"}
-}
-
--- define zones
-zone {
-     name = "driver",
-     attributes = {
-         type = "common",
-         location = "front-left"
-     }
-}
-
--- define resource classes
-resource.class {
-     name = "video_overlay",
-     shareable = false,
-     sync_release = true
-}
-
-resource.class {
-     name = "video_decoder",
-     shareable = false,
-     sync_release = true
-}
-
-resource.class {
-     name = "video_encoder",
-     shareable = false,
-     sync_release = true
-}
-
-resource.class {
-     name = "camera",
-     shareable = false,
-     sync_release = true
-}
diff --git a/media-config-target-artik10/hal/etc/pulse/client.conf b/media-config-target-artik10/hal/etc/pulse/client.conf
deleted file mode 100644
index 3637b20..0000000
--- a/media-config-target-artik10/hal/etc/pulse/client.conf
+++ /dev/null
@@ -1,37 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values are commented out.  Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-default-server = /var/run/pulse/native
-; default-dbus-server =
-
-autospawn = no
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-enable-shm = no
-shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB
-
-; auto-connect-localhost = no
-; auto-connect-display = no
diff --git a/media-config-target-artik10/hal/etc/pulse/daemon.conf b/media-config-target-artik10/hal/etc/pulse/daemon.conf
deleted file mode 100644
index 431e66b..0000000
--- a/media-config-target-artik10/hal/etc/pulse/daemon.conf
+++ /dev/null
@@ -1,83 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values are commented out.  Use either ; or # for
-## commenting.
-
-daemonize = yes
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-system-instance = yes
-; local-server-type = user
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-realtime-scheduling = yes
-realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file = /etc/pulse/default.pa
-
-log-target = dlog
-log-level = info
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = speex-fixed-3
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-flat-volumes = no
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-alternate-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
diff --git a/media-config-target-artik10/hal/etc/pulse/default.pa b/media-config-target-artik10/hal/etc/pulse/default.pa
deleted file mode 100644
index ef8f114..0000000
--- a/media-config-target-artik10/hal/etc/pulse/default.pa
+++ /dev/null
@@ -1,149 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
-.nofail
-load-module module-jackdbus-detect channels=2
-.fail
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music/video streams when a phone stream is active
-load-module module-role-cork
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-### Load DBus protocol
-.ifexists module-dbus-protocol.so
-load-module module-dbus-protocol
-.endif
-
-
-load-module module-switch-on-port-available
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
diff --git a/media-config-target-artik10/hal/etc/pulse/device-map.json b/media-config-target-artik10/hal/etc/pulse/device-map.json
deleted file mode 100644
index d241012..0000000
--- a/media-config-target-artik10/hal/etc/pulse/device-map.json
+++ /dev/null
@@ -1,26 +0,0 @@
-{
-	"device-types":[
-		{
-			"device-type":"builtin-speaker",
-			"playback-devices":{"normal":"alsa:0,0"}
-		},
-		{
-			"device-type":"builtin-mic",
-			"capture-devices":{"normal":"alsa:0,0"}
-		}
-	],
-	"device-files":{
-		"playback-devices":[
-			{
-				"device-string":"alsa:0,0",
-				"role":{"normal":"mmap=0 rate=44100"}
-			}
-		],
-		"capture-devices":[
-			{
-				"device-string":"alsa:0,0",
-				"role":{"normal":"rate=44100"}
-			}
-		]
-	}
-}
diff --git a/media-config-target-artik10/hal/etc/pulse/stream-map.json b/media-config-target-artik10/hal/etc/pulse/stream-map.json
deleted file mode 100644
index b11774e..0000000
--- a/media-config-target-artik10/hal/etc/pulse/stream-map.json
+++ /dev/null
@@ -1,209 +0,0 @@
-{
-	"latencies":[
-		{
-			"type":"low",
-			"fragsize-ms":25,
-			"minreq-ms":-1,
-			"tlength-ms":100,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"mid",
-			"fragsize-ms":50,
-			"minreq-ms":-1,
-			"tlength-ms":200,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"high",
-			"fragsize-ms":75,
-			"minreq-ms":-1,
-			"tlength-ms":400,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"voip",
-			"fragsize-ms":20,
-			"minreq-ms":20,
-			"tlength-ms":100,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"default",
-			"fragsize-ms":50,
-			"minreq-ms":-1,
-			"tlength-ms":200,
-			"prebuf-ms":-1,
-			"maxlength":-1
-		},
-		{
-			"type":"default-async",
-			"fragsize-ms":50,
-			"minreq-ms":20,
-			"tlength-ms":200,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-	],
-	"volumes":[
-		{
-			"type":"master",
-			"is-hal-volume":1
-		},
-		{
-			"type":"media",
-			"is-hal-volume":0
-		},
-		{
-			"type":"system",
-			"is-hal-volume":0
-		},
-		{
-			"type":"alarm",
-			"is-hal-volume":0
-		},
-		{
-			"type":"notification",
-			"is-hal-volume":0
-		},
-		{
-			"type":"voice",
-			"is-hal-volume":0
-		},
-		{
-			"type":"ringtone",
-			"is-hal-volume":0
-		},
-		{
-			"type":"voip",
-			"is-hal-volume":0
-		},
-		{
-			"type":"call",
-			"is-hal-volume":1
-		}
-	],
-	"streams":[
-		{
-			"role":"media",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"media"},
-			"avail-in-devices":["builtin-mic"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"]
-		},
-		{
-			"role":"system",
-			"priority" : 2,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"system"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"alarm",
-			"priority" : 4,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"alarm"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","builtin-speaker","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"notification",
-			"priority" : 4,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"notification"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","builtin-speaker","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"emergency",
-			"priority" : 4,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"voice-information",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"voice"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"voice-recognition",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["usb-audio","builtin-mic"],
-			"avail-out-devices":["none"],
-			"avail-frameworks":["audio-io","webrtc"]
-		},
-		{
-			"role":"voice-recognition-service",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["usb-audio","builtin-mic"],
-			"avail-out-devices":["none"],
-			"avail-frameworks":["audio-io"]
-		},
-		{
-			"role":"ringtone-voip",
-			"priority" : 5,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"ringtone"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","builtin-speaker","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io","sound-manager"]
-		},
-		{
-			"role":"voip",
-			"priority" : 5,
-			"route-type" : "manual",
-			"volume-types":{"in":"none","out":"voip"},
-			"avail-in-devices":["builtin-mic"],
-			"avail-out-devices":["builtin-speaker"],
-			"avail-frameworks":["audio-io","tone-player","sound-manager","webrtc"]
-		},
-		{
-			"role":"loopback",
-			"priority" : 2,
-			"route-type" : "manual",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["usb-audio"],
-			"avail-out-devices":["usb-audio"],
-			"avail-frameworks":["sound-manager"]
-		},
-		{
-			"role":"ext-media",
-			"priority" : 3,
-			"route-type" : "manual-ext",
-			"volume-types":{"in":"none","out":"media"},
-			"avail-in-devices":["usb-audio"],
-			"avail-out-devices":["bt-a2dp","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"]
-		},
-		{
-			"role":"solo",
-			"priority" : 2,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["wav-player","tone-player"]
-		}
-	]
-}
diff --git a/media-config-target-artik10/hal/etc/pulse/system.pa b/media-config-target-artik10/hal/etc/pulse/system.pa
deleted file mode 100644
index 3366a4d..0000000
--- a/media-config-target-artik10/hal/etc/pulse/system.pa
+++ /dev/null
@@ -1,73 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-### Load several protocols
-load-module module-native-protocol-unix auth-anonymous=1
-
-### Load module-tizenaudio-policy
-load-module module-tizenaudio-policy
-
-#.ifexists module-udev-detect.so
-load-module module-udev-detect
-#.endif
-
-### Sound Player module
-load-module module-sound-player
-load-module module-tone-player
-load-module module-role-ducking global=1 trigger_roles=solo/notification,voice-information ducking_roles=media,system,alarm,notification,voice-information,ext-media/media,ext-media volume=0%/25% fade_in=0/1000 fade_out=0/1000
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Automatically restore the volume of streams and devices
-#load-module module-stream-restore
-#load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-.ifexists module-dbus-protocol.so
-### If you want to allow TCP connections, set access to "remote" or "local,remote".
-load-module module-dbus-protocol access=local
-.endif
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-#load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle timeout=1
-
-load-sample-lazy camera-shutter-01 /usr/share/sounds/mm-camcorder/capture_shutter_01.ogg
-load-sample-lazy camera-shutter-02 /usr/share/sounds/mm-camcorder/capture_shutter_02.ogg
-load-sample-lazy recording-start /usr/share/sounds/mm-camcorder/recording_start_01.ogg
-load-sample-lazy recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.ogg
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf
deleted file mode 100644
index 47e22c5..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where an 'Aux' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 80
-description-key = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
deleted file mode 100644
index 96861e7..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
+++ /dev/null
@@ -1,104 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Dock Mic' or 'Dock Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 78
-description-key = analog-input-microphone-dock
-
-[Jack Dock Mic]
-required-any = any
-
-[Jack Dock Mic Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Dock Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Dock Mic Boost:on]
-name = input-boost-on
-
-[Option Dock Mic Boost:off]
-name = input-boost-off
-
-[Element Dock Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Dock Mic]
-name = analog-input-microphone-dock
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Dock Mic]
-name = analog-input-microphone-dock
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf
deleted file mode 100644
index d3501a8..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where an 'FM' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-description-key = analog-input-radio
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-.include analog-input.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
deleted file mode 100644
index 6e7775c..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
+++ /dev/null
@@ -1,104 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Front Mic' or 'Front Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 85
-description-key = analog-input-microphone-front
-
-[Jack Front Mic]
-required-any = any
-
-[Jack Front Mic Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Front Mic Boost:on]
-name = input-boost-on
-
-[Option Front Mic Boost:off]
-name = input-boost-off
-
-[Element Front Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Front Mic]
-name = analog-input-microphone-front
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Front Mic]
-name = analog-input-microphone-front
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
deleted file mode 100644
index eb5740a..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
+++ /dev/null
@@ -1,102 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For some ASUS netbooks that have one jack that can be either a Headphone
-; *or* a mic. This path will be active only when it is used as a mic.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 87
-description-key = analog-input-microphone
-
-[Jack Headphone Mic]
-required-any = any
-state.plugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Headphone Mic]
-name = analog-input-microphone
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Headphone Mic]
-name = analog-input-microphone
-required-any = any
-
-; Make sure the internal speakers are not auto-muted when you plug a mic in
-[Element Auto-Mute Mode]
-enumeration = select
-
-[Option Auto-Mute Mode:Disabled]
-name = analog-input-microphone
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
deleted file mode 100644
index 579db6b..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Headset Mic' or 'Headset Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 88
-description-key = analog-input-microphone-headset
-
-[Jack Headset Mic]
-required-any = any
-
-[Jack Headset Mic Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Headphone]
-state.plugged = unknown
-
-[Jack Front Headphone]
-state.plugged = unknown
-
-[Jack Headphone Mic]
-state.plugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headset Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headset Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headset]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Headset Mic]
-name = Headset Microphone
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Headset Mic]
-name = Headset Microphone
-required-any = any
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf
deleted file mode 100644
index 9e22008..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf
+++ /dev/null
@@ -1,133 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists
-; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-description-key = analog-input-microphone-internal
-
-[Jack Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Internal Mic Boost]
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Internal Mic Boost:on]
-name = input-boost-on
-
-[Option Internal Mic Boost:off]
-name = input-boost-off
-
-[Element Int Mic Boost]
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Int Mic Boost:on]
-name = input-boost-on
-
-[Option Int Mic Boost:off]
-name = input-boost-off
-
-[Element Internal Mic]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Int Mic]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Internal Mic]
-name = analog-input-microphone-internal
-
-[Option Input Source:Int Mic]
-name = analog-input-microphone-internal
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Internal Mic]
-name = analog-input-microphone-internal
-
-[Option Capture Source:Int Mic]
-name = analog-input-microphone-internal
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
deleted file mode 100644
index 898410a..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
+++ /dev/null
@@ -1,154 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists
-; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-description-key = analog-input-microphone-internal
-
-[Jack Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Internal Mic Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Internal Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Internal Mic Boost:on]
-name = input-boost-on
-
-[Option Internal Mic Boost:off]
-name = input-boost-off
-
-[Element Int Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Int Mic Boost:on]
-name = input-boost-on
-
-[Option Int Mic Boost:off]
-name = input-boost-off
-
-[Element Internal Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Int Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Internal Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Option Input Source:Int Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Internal Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Option Capture Source:Int Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Headphone Mic]
-switch = off
-volume = off
-
-[Element Headphone Mic Boost]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf
deleted file mode 100644
index cf20790..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf
+++ /dev/null
@@ -1,144 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 81
-
-[Jack Line]
-required-any = any
-
-[Jack Line Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Line - Input]
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line Boost]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Line]
-name = analog-input-linein
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Line]
-name = analog-input-linein
-required-any = any
-
-[Element PCM Capture Source]
-enumeration = select
-
-[Option PCM Capture Source:Line]
-name = analog-input-linein
-required-any = any
-
-[Option PCM Capture Source:Line In]
-name = analog-input-linein
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Line In]
-priority = 19
-name = input-linein
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
deleted file mode 100644
index 7147d20..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Mic/Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 85
-description-key = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf
deleted file mode 100644
index 53c03c8..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf
+++ /dev/null
@@ -1,141 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Mic' or 'Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 87
-description-key = analog-input-microphone
-
-[Jack Mic]
-required-any = any
-
-[Jack Mic Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Mic - Input]
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Mic Boost:on]
-name = input-boost-on
-
-[Option Mic Boost:off]
-name = input-boost-off
-
-[Element Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Mic]
-name = analog-input-microphone
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Mic]
-name = analog-input-microphone
-required-any = any
-
-[Element PCM Capture Source]
-enumeration = select
-
-[Option PCM Capture Source:Mic]
-name = analog-input-microphone
-required-any = any
-
-[Option PCM Capture Source:Mic-In/Mic Array]
-name = analog-input-microphone
-required-any = any
-
-;;; Some AC'97s have "Mic Select" and "Mic Boost (+20dB)"
-
-[Element Mic Select]
-enumeration = select
-
-[Option Mic Select:Mic1]
-name = input-microphone
-priority = 20
-
-[Option Mic Select:Mic2]
-name = input-microphone
-priority = 19
-
-[Element Mic Boost (+20dB)]
-switch = select
-volume = merge
-
-[Option Mic Boost (+20dB):on]
-name = input-boost-on
-
-[Option Mic Boost (+20dB):off]
-name = input-boost-off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common
deleted file mode 100644
index e5ced21..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common
+++ /dev/null
@@ -1,60 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Common element for all microphone inputs
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[Properties]
-device.icon_name = audio-input-microphone
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Line Boost]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-[Element Inverted Internal Mic]
-switch = off
-volume = off
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-priority = 19
-name = input-microphone
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
deleted file mode 100644
index 7136193..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
+++ /dev/null
@@ -1,104 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Rear Mic' or 'Rear Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 82
-description-key = analog-input-microphone-rear
-
-[Jack Rear Mic]
-required-any = any
-
-[Jack Rear Mic Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Rear Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Rear Mic Boost:on]
-name = input-boost-on
-
-[Option Rear Mic Boost:off]
-name = input-boost-off
-
-[Element Rear Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Rear Mic]
-name = analog-input-microphone-rear
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Rear Mic]
-name = analog-input-microphone-rear
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
deleted file mode 100644
index 99d1d79..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'TV Tuner' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-description-key = analog-input-video
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf
deleted file mode 100644
index 50c999e..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Video' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf
deleted file mode 100644
index c9db677..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf
+++ /dev/null
@@ -1,102 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; A fallback for devices that lack separate Mic/Line/Aux/Video/TV
-; Tuner/FM elements
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required-absent = any
-
-[Element Mic Boost]
-required-absent = any
-
-[Element Dock Mic]
-required-absent = any
-
-[Element Dock Mic Boost]
-required-absent = any
-
-[Element Front Mic]
-required-absent = any
-
-[Element Front Mic Boost]
-required-absent = any
-
-[Element Int Mic]
-required-absent = any
-
-[Element Int Mic Boost]
-required-absent = any
-
-[Element Internal Mic]
-required-absent = any
-
-[Element Internal Mic Boost]
-required-absent = any
-
-[Element Rear Mic]
-required-absent = any
-
-[Element Rear Mic Boost]
-required-absent = any
-
-[Element Headset]
-required-absent = any
-
-[Element Headset Mic]
-required-absent = any
-
-[Element Headset Mic Boost]
-required-absent = any
-
-[Element Headphone Mic]
-required-absent = any
-
-[Element Headphone Mic Boost]
-required-absent = any
-
-[Element Line]
-required-absent = any
-
-[Element Line Boost]
-required-absent = any
-
-[Element Aux]
-required-absent = any
-
-[Element Video]
-required-absent = any
-
-[Element Mic/Line]
-required-absent = any
-
-[Element TV Tuner]
-required-absent = any
-
-[Element FM]
-required-absent = any
-
-.include analog-input.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common
deleted file mode 100644
index 201087e..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common
+++ /dev/null
@@ -1,289 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Mixer path for PulseAudio's ALSA backend, common elements for all
-; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distinguish them, in the same
-; order they appear here.
-;
-; Source selection should use the following names:
-;
-;       input                       -- If we don't know the exact kind of input
-;       input-microphone
-;       input-microphone-internal
-;       input-microphone-external
-;       input-linein
-;       input-video
-;       input-radio
-;       input-docking-microphone
-;       input-docking-linein
-;       input-docking
-;
-;  We explicitly don't want to wrap the following sources:
-;
-;       CD
-;       Synth/MIDI
-;       Phone
-;       Mix
-;       Digital/SPDIF
-;       Master
-;       PC Speaker
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Input Source Select'
-
-[Element Input Source Select]
-enumeration = select
-
-[Option Input Source Select:Input1]
-name = input
-priority = 10
-
-[Option Input Source Select:Input2]
-name = input
-priority = 5
-
-;;; 'Input Source'
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Digital Mic]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Microphone]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Front Microphone]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Internal Mic 1]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Line-In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Docking-Station]
-name = input-docking
-priority = 17
-
-[Option Input Source:AUX IN]
-name = input
-priority = 10
-
-;;; 'Capture Source'
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:TV Tuner]
-name = input-video
-
-[Option Capture Source:FM]
-name = input-radio
-
-[Option Capture Source:Mic/Line]
-name = input
-
-[Option Capture Source:Line/Mic]
-name = input
-
-[Option Capture Source:Microphone]
-name = input-microphone
-
-[Option Capture Source:Int DMic]
-name = input-microphone-internal
-
-[Option Capture Source:iMic]
-name = input-microphone-internal
-
-[Option Capture Source:i-Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Microphone]
-name = input-microphone-internal
-
-[Option Capture Source:Front Microphone]
-name = input-microphone
-
-[Option Capture Source:Mic1]
-name = input-microphone
-
-[Option Capture Source:Mic2]
-name = input-microphone
-
-[Option Capture Source:D-Mic]
-name = input-microphone
-
-[Option Capture Source:IntMic]
-name = input-microphone-internal
-
-[Option Capture Source:ExtMic]
-name = input-microphone-external
-
-[Option Capture Source:Ext Mic]
-name = input-microphone-external
-
-[Option Capture Source:E-Mic]
-name = input-microphone-external
-
-[Option Capture Source:e-Mic]
-name = input-microphone-external
-
-[Option Capture Source:LineIn]
-name = input-linein
-
-[Option Capture Source:Analog]
-name = input
-
-[Option Capture Source:Line-In]
-name = input-linein
-
-[Option Capture Source:Line In]
-name = input-linein
-
-[Option Capture Source:Video]
-name = input-video
-
-[Option Capture Source:Aux]
-name = input
-
-[Option Capture Source:Aux0]
-name = input
-
-[Option Capture Source:Aux1]
-name = input
-
-[Option Capture Source:Aux2]
-name = input
-
-[Option Capture Source:Aux3]
-name = input
-
-[Option Capture Source:AUX IN]
-name = input
-
-[Option Capture Source:Aux In]
-name = input
-
-[Option Capture Source:AOUT]
-name = input
-
-[Option Capture Source:AUX]
-name = input
-
-[Option Capture Source:Cam Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 1]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 2]
-name = input-microphone
-
-[Option Capture Source:Analog Inputs]
-name = input
-
-[Option Capture Source:Unknown1]
-name = input
-
-[Option Capture Source:Unknown2]
-name = input
-
-[Option Capture Source:Docking-Station]
-name = input-docking
-
-;;; 'Mic Jack Mode'
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-name = input-microphone
-
-[Option Mic Jack Mode:Line In]
-name = input-linein
-
-;;; 'Digital Input Source'
-
-[Element Digital Input Source]
-enumeration = select
-
-[Option Digital Input Source:Digital Mic 1]
-name = input-microphone
-
-[Option Digital Input Source:Analog Inputs]
-name = input
-
-[Option Digital Input Source:Digital Mic 2]
-name = input-microphone
-
-;;; 'Analog Source'
-
-[Element Analog Source]
-enumeration = select
-
-[Option Analog Source:Mic]
-name = input-microphone
-
-[Option Analog Source:Line in]
-name = input-linein
-
-[Option Analog Source:Aux]
-name = input
-
-;;; 'Shared Mic/Line in'
-
-[Element Shared Mic/Line in]
-enumeration = select
-
-[Option Shared Mic/Line in:Mic in]
-name = input-microphone
-
-[Option Shared Mic/Line in:Line in]
-name = input-linein
-
-;;; Various Boosts
-
-[Element Capture Boost]
-switch = select
-
-[Option Capture Boost:on]
-name = input-boost-on
-
-[Option Capture Boost:off]
-name = input-boost-off
-
-[Element Auto Gain Control]
-switch = select
-
-[Option Auto Gain Control:on]
-name = input-agc-on
-
-[Option Auto Gain Control:off]
-name = input-agc-off
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf
deleted file mode 100644
index 360a1fc..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-; Some gaming devices have a separate "chat" device, this is for voice chat
-; while playing games. This device is just a fairly standard analog mono
-; device, but it's nicer to make it clear that this is the "chat" device
-; as is mentioned in the marketing info and manual.
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
deleted file mode 100644
index bda137d..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
+++ /dev/null
@@ -1,118 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for the second headphone output on dual-headphone machines.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 98
-
-[Properties]
-device.icon_name = audio-headphones
-
-; HP EliteDesk 800 SFF Headphone
-[Jack Front Headphone,1]
-required-any = any
-
-; HP EliteDesk 800 DM Headphone
-[Jack Front Headphone Surround]
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the second headphones, not
-; the first headphones. But it should not hurt if we leave the
-; headphone jack enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone,1]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone+LO]
-switch = mute
-volume = zero
-
-[Element Speaker+LO]
-switch = off
-volume = off
-
-[Element Headphone2]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-; On some machines, the Front Volume Control is shared by Headphone and Lineout,
-; or Headphone and Speaker, but they have independent Volume Switch. Here only
-; use switch to mute Lineout or Speaker.
-[Element Front]
-switch = off
-volume = zero
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-[Element Bass Speaker]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
deleted file mode 100644
index 3c62c5e..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
+++ /dev/null
@@ -1,180 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for mixers that have a 'Headphone' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-description-key = analog-output-headphones
-
-[Properties]
-device.icon_name = audio-headphones
-
-[Jack Dock Headphone]
-required-any = any
-
-[Jack Dock Headphone Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Front Headphone]
-required-any = any
-
-; HP EliteDesk 800 DM Headset
-[Jack Front Headphone Front]
-required-any = any
-
-[Jack Front Headphone Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Headphone]
-required-any = any
-
-[Jack Headphone Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-# This jack can be either a headphone *or* a mic. Used on some ASUS netbooks.
-[Jack Headphone Mic]
-required-any = any
-
-[Jack Headphone - Output]
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Speaker+LO]
-switch = off
-volume = off
-
-[Element Headphone+LO]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone,1]
-switch = mute
-volume = zero
-
-[Element Headset]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line HP Swap]
-switch = on
-required-any = any
-
-; This profile path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-; On some machines, the Front Volume Control is shared by Headphone and Lineout,
-; or Headphone and Speaker, but they have independent Volume Switch. Here only
-; use switch to mute Lineout or Speaker.
-[Element Front]
-switch = off
-volume = zero
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-[Element Bass Speaker]
-switch = off
-volume = off
-
-[Element Speaker Front]
-switch = off
-volume = off
-
-[Element Speaker Surround]
-switch = off
-volume = off
-
-[Element Speaker Side]
-switch = off
-volume = off
-
-[Element Speaker CLFE]
-switch = off
-volume = off
-
-[Element Speaker Center/LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
deleted file mode 100644
index 1ffce22..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
+++ /dev/null
@@ -1,214 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-[General]
-priority = 90
-description-key = analog-output-lineout
-
-[Jack Line Out]
-required-any = any
-
-[Jack Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Front Line Out]
-required-any = any
-
-[Jack Front Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Rear Line Out]
-required-any = any
-
-[Jack Rear Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Front]
-required-any = any
-
-[Jack Line Out Front Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out CLFE]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out CLFE Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Surround]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Surround Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Side]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Side Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Dock Line Out]
-required-any = any
-
-[Jack Dock Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-required-any = any
-
-[Element Headphone+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-required-any = any
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Line HP Swap]
-switch = off
-required-any = any
-
-; This profile path is intended to control line out, let's mute headphones
-; else there will be a spike when plugging in headphones
-[Element Headphone]
-switch = off
-volume = off
-
-[Element Headphone,1]
-switch = off
-volume = off
-
-[Element Headphone2]
-switch = off
-volume = off
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Bass Speaker]
-switch = off
-volume = off
-
-[Element Speaker Front]
-switch = off
-volume = off
-
-[Element Speaker Surround]
-switch = off
-volume = off
-
-[Element Speaker Side]
-switch = off
-volume = off
-
-[Element Speaker CLFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf
deleted file mode 100644
index 5e49405..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf
+++ /dev/null
@@ -1,99 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Intended for usage on boards that have a separate Mono output plug.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 50
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = off
-volume = off
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone,1]
-switch = mute
-volume = zero
-
-[Element Headphone+LO]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf
deleted file mode 100644
index 756afa9..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf
+++ /dev/null
@@ -1,187 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for mixers that don't have a 'Speaker' control, but where we
-; force enable the speaker paths nonetheless.
-; Needed for some older Dell laptops.
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-description-key = analog-output-speaker
-
-[Properties]
-device.icon_name = audio-speakers
-
-[Jack Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out Front]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone,1]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Headphone+LO]
-switch = off
-volume = off
-
-[Element Speaker+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Desktop Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Front Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element Center Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element LFE Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element Bass Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
deleted file mode 100644
index 72f928f..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
+++ /dev/null
@@ -1,246 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for mixers that have a 'Speaker' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-description-key = analog-output-speaker
-
-[Properties]
-device.icon_name = audio-speakers
-
-[Jack Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out Front]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Speaker]
-required-any = any
-
-[Jack Speaker Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Speaker Front Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Speaker - Output]
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; Make sure the internal speakers are not auto-muted once the system has speakers
-[Element Auto-Mute Mode]
-enumeration = select
-
-[Option Auto-Mute Mode:Disabled]
-name = analog-output-speaker
-
-; This profile path is intended to control the speaker, let's mute headphones
-; else there will be a spike when plugging in headphones
-[Element Headphone]
-switch = off
-volume = off
-
-[Element Headphone,1]
-switch = off
-volume = off
-
-[Element Headphone2]
-switch = off
-volume = off
-
-[Element Headphone+LO]
-switch = off
-volume = off
-
-[Element Speaker+LO]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Desktop Speaker]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Front Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-required-any = any
-
-[Element Speaker Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-required-any = any
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-required-any = any
-
-[Element Speaker Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-required-any = any
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Speaker Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element Center Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-required-any = any
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element LFE Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-required-any = any
-
-[Element Bass Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-required-any = any
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Speaker CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf
deleted file mode 100644
index 0f6b5f5..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf
+++ /dev/null
@@ -1,88 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Intended for the 'default' output. Note that a-o-speaker.conf has a
-; higher priority than this
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-.include analog-output.conf.common
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
deleted file mode 100644
index 31d4b44..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
+++ /dev/null
@@ -1,186 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Common part of all paths
-
-; So here's generally how mixer paths are used by PA: PA goes through
-; a mixer path file from top to bottom and checks if a mixer element
-; described therein exists. If so it is added to the list of mixer
-; elements PA will control, keeping the order it read them in. If a
-; mixer element described here has set the required= or
-; required-absent= directives a path might not be accepted as valid
-; and is ignored in its entirety (see below). However usually if a
-; element listed here is missing this one element is ignored but not
-; the entire path.
-;
-; When a device shall be muted/unmuted *all* elements listed in a path
-; file with "switch = mute" will be toggled.
-;
-; When a device shall change its volume, PA will got through the list
-; of all elements with "volume = merge" and set the volume on the
-; first element. If that element does not support dB volumes, this is
-; where the story ends. If it does support dB volumes, PA divides the
-; requested volume by the volume that was set on this element, and
-; then go on to the next element with "volume = merge" and then set
-; that there, and so on.  That way the first volume element in the
-; path will be the one that does the 'biggest' part of the overall
-; volume adjustment, with the remaining elements usually being set to
-; some value next to 0dB. This logic makes sure we get the full range
-; over all volume sliders and a very high granularity of volumes
-; already in hardware.
-;
-; All switches and enumerations set to "select" are exposed via the
-; "port" functionality of sinks/sources. Basically every possible
-; switch setting and every possible enumeration setting will be
-; combined and made into a "port". So make sure you don't list too
-; many switches/enums for exposing, because the number of ports might
-; rise exponentially.
-;
-; Only one path can be selected at a time. All paths that are valid
-; for an audio device will be exposed as "port" for the sink/source.
-
-
-; [General]
-; type = ...                             # The device type. It's highly recommended to set a type for every path.
-;                                        # See parse_type() in alsa-mixer.c for supported values.
-; priority = ...                         # Priority for this path
-; description-key = ...                  # The path description is looked up from a table in path_verify() in
-;                                        # src/modules/alsa/alsa-mixer.c. By default the path name (i.e. the file name
-;                                        # minus the ".conf" suffix) is used as the lookup key, but if this option is
-;                                        # set, then the given string is used as the key instead. In any case the
-;                                        # "description" option can be used to override the path description.
-; description = ...                      # Description for this path. Overrides the normal description lookup logic, as
-;                                        # described in the "description-key" documentation above.
-; mute-during-activation = yes | no      # If this path supports hardware mute, should the hw mute be used while activating this
-;                                        # path? In some cases this can reduce extra noises during port switching, while in other
-;                                        # cases this can increase such noises. Default: no.
-; eld-device = ...                       # If this is an HDMI port, set to "auto" so that PulseAudio will try to read
-;                                        # the monitor ELD information from the ALSA mixer. By default the ELD information
-;                                        # is not read, because it's only applicable with HDMI. Earlier the "auto" option
-;                                        # didn't exist, and the hw device index had to be manually configured. For
-;                                        # backwards compatibility, it's still possible to manually configure the device
-;                                        # index using this option.
-;
-; [Properties]                           # Property list for this path. The list is merged into the port property list.
-; <key> = <value>                        # Each property is defined on its own line.
-; ...
-;
-; [Option ...:...]                       # For each option of an enumeration or switch element
-;                                        # that shall be exposed as a sink/source port. Needs to
-;                                        # be named after the Element, followed by a colon, followed
-;                                        # by the option name, resp. on/off if the element is a switch.
-; name = ...                             # Logical name to use in the path identifier
-; priority = ...                         # Priority if this is made into a device port
-; required = ignore | enumeration | any            # In this element, this option must exist or the path will be invalid. ("any" is an alias for "enumeration".)
-; required-any = ignore | enumeration | any        # In this element, either this or another option must exist (or an element)
-; required-absent = ignore | enumeration | any     # In this element, this option must not exist or the path will be invalid
-;
-; [Element ...]                          # For each element that we shall control. The "..." here is the element name,
-;                                        # or name and index separated by a comma.
-; required = ignore | switch | volume | enumeration | any     # If set, require this element to be of this kind and available,
-;                                                             # otherwise don't consider this path valid for the card
-; required-any = ignore | switch | volume | enumeration | any # If set, at least one of the elements or jacks with required-any in this
-;                                                             # path must be present, otherwise this path is invalid for the card
-; required-absent = ignore | switch | volume                  # If set, require this element to not be of this kind and not
-;                                                             # available, otherwise don't consider this path valid for the card
-;
-; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
-;                                            # always set it to off, always to on, or make it selectable as port.
-;                                            # If set to 'select' you need to define an Option section for on
-;                                            # and off
-; volume = ignore | merge | off | zero | <volume step> # What to do with this volume: ignore it, merge it into the device
-;                                                      # volume slider, always set it to the lowest value possible, or always
-;                                                      # set it to 0 dB (for whatever that means), or always set it to
-;                                                      # <volume step> (this only makes sense in path configurations where
-;                                                      # the exact hardware and driver are known beforehand).
-; volume-limit = <volume step>           # Limit the maximum volume by disabling the volume steps above <volume step>.
-; enumeration = ignore | select          # What to do with this enumeration, ignore it or make it selectable
-;                                        # via device ports. If set to 'select' you need to define an Option section
-;                                        # for each of the items you want to expose
-; direction = playback | capture         # Is this relevant only for playback or capture? If not set this will implicitly be
-;                                        # set the direction of the PCM device is opened as. Generally this doesn't need to be set
-;                                        # unless you have a broken driver that has playback controls marked for capture or vice
-;                                        # versa
-; direction-try-other = no | yes         # If the element does not supported what is requested, try the other direction, too?
-;
-; override-map.1 = ...                   # Override the channel mask of the mixer control if the control only exposes a single channel
-; override-map.2 = ...                   # Override the channel masks of the mixer control if the control only exposes two channels
-;                                        # Override maps should list for each element channel which high-level channels it controls via a
-;                                        # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
-;                                        # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
-;                                        # channels in a mask
-; [Jack ...]                           # For each jack that we will use for jack detection
-;                                      # The name 'Jack Foo' must match ALSA's 'Foo Jack' control.
-; required = ignore | any              # If not set to ignore, make the path invalid if this jack control is not present.
-; required-absent = ignore | any       # If not set to ignore, make the path invalid if this jack control is present.
-; required-any = ignore | any          # If not set to ignore, make the path invalid if no jack controls and no elements with
-;                                      # the required-any are present.
-; state.plugged = yes | no | unknown   # Normally a plugged jack would mean the port becomes available, and an unplugged means it's
-; state.unplugged = yes | no | unknown # unavailable, but the port status can be overridden by specifying state.plugged and/or state.unplugged.
-; append-pcm-to-name = no | yes        # Add ",pcm=N" to the jack name? N is the hw PCM device index. HDMI jacks have
-;                                      # the PCM device index in their name, but different drivers use different
-;                                      # numbering schemes, so we can't hardcode the full jack name in our configuration
-;                                      # files.
-
-[Element PCM]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element External Amplifier]
-switch = select
-
-[Option External Amplifier:on]
-name = output-amplifier-on
-priority = 10
-
-[Option External Amplifier:off]
-name = output-amplifier-off
-priority = 0
-
-[Element Bass Boost]
-switch = select
-
-[Option Bass Boost:on]
-name = output-bass-boost-on
-priority = 0
-
-[Option Bass Boost:off]
-name = output-bass-boost-off
-priority = 10
-
-[Element IEC958]
-switch = off
-
-[Element IEC958 Optical Raw]
-switch = off
-
-;;; 'Analog Output'
-
-[Element Analog Output]
-enumeration = select
-
-[Option Analog Output:Speakers]
-name = output-speaker
-priority = 10
-
-[Option Analog Output:Headphones]
-name = output-headphones
-priority = 9
-
-[Option Analog Output:FP Headphones]
-name = output-headphones
-priority = 8
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf
deleted file mode 100644
index bb3cec1..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort
-type = hdmi
-priority = 59
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf
deleted file mode 100644
index 3389a72..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 2
-type = hdmi
-priority = 58
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf
deleted file mode 100644
index 7607f8f..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 11
-type = hdmi
-priority = 49
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf
deleted file mode 100644
index 316d810..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 3
-type = hdmi
-priority = 57
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf
deleted file mode 100644
index 0601ef7..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 4
-type = hdmi
-priority = 56
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf
deleted file mode 100644
index ded155b..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 5
-type = hdmi
-priority = 55
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf
deleted file mode 100644
index de31791..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 6
-type = hdmi
-priority = 54
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf
deleted file mode 100644
index 6d72176..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 7
-type = hdmi
-priority = 53
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf
deleted file mode 100644
index d5d0771..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 8
-type = hdmi
-priority = 52
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf
deleted file mode 100644
index 0b8f9cd..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 9
-type = hdmi
-priority = 51
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf
deleted file mode 100644
index f15797c..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 10
-type = hdmi
-priority = 50
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf
deleted file mode 100644
index babc839..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-[Element PCM Capture Source]
-enumeration = select
-
-[Option PCM Capture Source:IEC958 In]
-name = iec958-input
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf
deleted file mode 100644
index d47e5eb..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf
+++ /dev/null
@@ -1,18 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-
-[Element IEC958]
-switch = mute
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf
deleted file mode 100644
index 5842bfe..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Steelseries Arctis 5 USB headset stereo chat path. The headset has two
-; output devices. The first one is meant for voice audio, and the second
-; one meant for everything else. The purpose of this unusual design is to
-; provide separate volume controls for voice and other audio, which can be
-; useful in gaming.
-
-[General]
-priority = 50
-
-[Element Com Speaker]
-switch = mute
-volume = merge
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf
deleted file mode 100644
index b758a6f..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Steelseries Arctis 5 USB headset stereo game path. The headset has two
-; output devices. The first one is meant for voice audio, and the second
-; one meant for everything else. The purpose of this unusual design is to
-; provide separate volume controls for voice and other audio, which can be
-; useful in gaming.
-
-[General]
-priority = 99
-
-[Element PCM]
-switch = mute
-volume = merge
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf
deleted file mode 100644
index 9fa7fe9..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset microphone input path. These headsets usually have two
-; output devices. The first one is mono, meant for voice audio, and the second
-; one is stereo, meant for everything else. The purpose of this unusual design
-; is to provide separate volume controls for voice and other audio, which can
-; be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-
-[General]
-description-key = analog-input-microphone-headset
-
-[Element Headset]
-volume = merge
-switch = mute
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf
deleted file mode 100644
index 6df662f..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset mono output path. These headsets usually have two
-; output devices. The first one is mono, meant for voice audio, and the second
-; one is stereo, meant for everything else. The purpose of this unusual design
-; is to provide separate volume controls for voice and other audio, which can
-; be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-
-[General]
-description-key = analog-output-headphones-mono
-
-[Element PCM]
-volume = merge
-switch = mute
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf
deleted file mode 100644
index 1a1e794..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset mono output path. These headsets usually have two
-; output devices. The first one is mono, meant for voice audio, and the second
-; one is stereo, meant for everything else. The purpose of this unusual design
-; is to provide separate volume controls for voice and other audio, which can
-; be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-
-[General]
-description-key = analog-output-headphones
-
-[Element PCM,1]
-volume = merge
-switch = mute
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf
deleted file mode 100644
index 7f111f2..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-[Element PCM,1]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf
deleted file mode 100644
index 043596e..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf
+++ /dev/null
@@ -1,94 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Creative Sound Blaster Audigy product line
-;
-; These are just copies of the mappings we find in default.conf, with the
-; small change of making analog-stereo and analog-mono non-fallback mappings.
-; This is needed because these cards only support duplex profiles with mono
-; inputs, and in the default configuration, with stereo being a fallback
-; mapping, the mono mapping is never tried.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = yes
-
-# Based on stereo-fallback
-[Mapping analog-stereo]
-device-strings = hw:%f
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-# Based on mono-fallback
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic
-priority = 1
-
-# The rest of these are identical to what's in default.conf
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf
deleted file mode 100644
index cc74852..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf
+++ /dev/null
@@ -1,68 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Behringer U-Phoria UMC22
-;
-; Default mapping only allows to use stereo input and sound card has two
-; physical input channels.
-;
-; However in case of only using a single input channel (like condenser
-; microphone) only one channel will have any sound, which is often
-; inconvenient for casual use.
-;
-; This config includes mono input options which makes it much more
-; friendly in single input configuration.
-;
-; This config also removes default digital input/output mappings that do
-; not physically exist on this card.
-;
-; Added by Nazar Mokrynskyi <nazar@mokrynskyi.com>
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo-input]
-device-strings = hw:%f
-channel-map = left,right
-paths-input = analog-input-mic
-direction = input
-priority = 4
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono,mono
-paths-input = analog-input-mic
-direction = input
-priority = 3
-
-[Mapping analog-mono-left]
-device-strings = hw:%f
-channel-map = mono,aux1
-paths-input = analog-input-mic
-direction = input
-priority = 2
-
-[Mapping analog-mono-right]
-device-strings = hw:%f
-channel-map = aux1,mono
-paths-input = analog-input-mic
-direction = input
-priority = 1
-
-[Mapping analog-stereo-output]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output
-direction = output
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf
deleted file mode 100644
index 1b6f61c..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-# Config for CMEDIA USB2.0 High-Speed True HD Audio 147a:e055
-# Added by Jean-Philippe Guillemin <h1p8r10n@gmail.com>
-
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 10
-
-# If everything else fails, try to use hw:0 as a stereo device.
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 7
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = hw:%f,2 hw:%f,0
-channel-map = left,right
-paths-output = iec958-stereo-output
-paths-input = iec958-stereo-input
-priority = 5
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf
deleted file mode 100644
index fc58982..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf
+++ /dev/null
@@ -1,589 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned (and should be good enough for the vast majority of
-; cards). If you want to assign a different profile set than this one
-; to a device, either set the udev property PULSE_PROFILE_SET for the
-; card, or use the "profile_set" module argument when loading
-; module-alsa-card.
-;
-; So what is this about? Simply, what we do here is map ALSA devices
-; to how they are exposed in PA. We say which ALSA device string to
-; use to open a device, which channel mapping to use then, and which
-; mixer path to use. This is encoded in a 'mapping'. Multiple of these
-; mappings can be bound together in a 'profile' which is then directly
-; exposed in the UI as a card profile. Each mapping assigned to a
-; profile will result in one sink/source to be created if the profile
-; is selected for the card.
-;
-; Additionally, the path set configuration files can describe the
-; decibel values assigned to the steps of the volume elements. This
-; can be used to work around situations when the alsa driver doesn't
-; provide any decibel information, or when the information is
-; incorrect.
-
-
-; [General]
-; auto-profiles = no | yes                  # Instead of defining all profiles manually, autogenerate
-;                                           # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ...                      # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ...                         # Channel mapping to use for this device
-; description = ...                         # Description for the mapping. Note that it's better to set the description
-;                                           # in the well_known_descriptions table in alsa-mixer.c than with this
-;                                           # option, because the descriptions in alsa-mixer.c are translatable.
-; description-key = ...                     # A custom key for the well_known_descriptions table (by default the mapping
-;                                           # name is used).
-; paths-input = ...                         # A list of mixer paths to use. Every path in this list will be probed.
-;                                           # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ...                       # Instead of configuring a full mixer path simply configure a single
-;                                           # mixer element for volume/mute handling. The value can be an element
-;                                           # name, or name and index separated by a comma.
-; element-output = ...
-; priority = ...
-; direction = any | input | output          # Only useful for?
-;
-; exact-channels = yes | no                 # If no, and the exact number of channels is not supported,
-;                                           # allow device to be opened with another channel count
-; fallback = no | yes                       # This mapping will only be considered if all non-fallback mappings fail
-; intended-roles = ...                      # Set the device.intended_roles property for the sink/source.
-;
-; [Profile id]
-; input-mappings = ...                      # Lists mappings for sources on this profile, those mapping must be
-;                                           # defined in this file too
-; output-mappings = ...                     # Lists mappings for sinks on this profile, those mappings must be
-;                                           # defined in this file too
-; description = ...
-; priority = ...                            # Numeric value to deduce priority for this profile
-; skip-probe = no | yes                     # Skip probing for availability? If this is yes then this profile
-;                                           # will be assumed as working without probing. Makes initialization
-;                                           # a bit faster but only works if the card is really known well.
-;
-; fallback = no | yes                       # This profile will only be considered if all non-fallback profiles fail
-; [DecibelFix element]                      # Decibel fixes can be used to work around missing or incorrect dB
-;                                           # information from alsa. A decibel fix is a table that maps volume steps
-;                                           # to decibel values for one volume element. The "element" part in the
-;                                           # section title is the name of the volume element (or name and index
-;                                           # separated by a comma).
-;                                           #
-;                                           # NOTE: This feature is meant just as a help for figuring out the correct
-;                                           # decibel values. PulseAudio is not the correct place to maintain the
-;                                           # decibel mappings!
-;                                           #
-;                                           # If you need this feature, then you should make sure that when you have
-;                                           # the correct values figured out, the alsa driver developers get informed
-;                                           # too, so that they can fix the driver.
-;
-; db-values = ...                           # The option value consists of pairs of step numbers and decibel values.
-;                                           # The pairs are separated with whitespace, and steps are separated from
-;                                           # the corresponding decibel values with a colon. The values must be in an
-;                                           # increasing order. Here's an example of a valid string:
-;                                           #
-;                                           #     "0:-40.50  1:-38.70  3:-33.00  11:0"
-;                                           #
-;                                           # The lowest step imposes a lower limit for hardware volume and the
-;                                           # highest step correspondingly imposes a higher limit. That means that
-;                                           # that the mixer will never be set outside those values - the rest of the
-;                                           # volume scale is done using software volume.
-;                                           #
-;                                           # As can be seen in the example, you don't need to specify a dB value for
-;                                           # each step. The dB values for skipped steps will be linearly interpolated
-;                                           # using the nearest steps that are given.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 15
-
-# If everything else fails, try to use hw:0 as a stereo device...
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-# ...and if even that fails, try to use hw:0 as a mono device.
-[Mapping mono-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic
-priority = 1
-
-# If everything else fails, try to use hw:0 as a stereo device.
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = iec958-stereo-output
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping iec958-dts-surround-51]
-device-strings = dca:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-description = Digital Stereo (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = left,right
-priority = 9
-direction = output
-
-[Mapping hdmi-surround]
-description = Digital Surround 5.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 8
-direction = output
-
-[Mapping hdmi-surround71]
-description = Digital Surround 7.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 8
-direction = output
-
-[Mapping hdmi-dts-surround]
-description = Digital Surround 5.1 (HDMI/DTS)
-device-strings = dcahdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra1]
-description = Digital Stereo (HDMI 2)
-device-strings = hdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra1]
-description = Digital Surround 5.1 (HDMI 2)
-device-strings = hdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra1]
-description = Digital Surround 7.1 (HDMI 2)
-device-strings = hdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra1]
-description = Digital Surround 5.1 (HDMI 2/DTS)
-device-strings = dcahdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra2]
-description = Digital Stereo (HDMI 3)
-device-strings = hdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra2]
-description = Digital Surround 5.1 (HDMI 3)
-device-strings = hdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra2]
-description = Digital Surround 7.1 (HDMI 3)
-device-strings = hdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra2]
-description = Digital Surround 5.1 (HDMI 3/DTS)
-device-strings = dcahdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra3]
-description = Digital Stereo (HDMI 4)
-device-strings = hdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra3]
-description = Digital Surround 5.1 (HDMI 4)
-device-strings = hdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra3]
-description = Digital Surround 7.1 (HDMI 4)
-device-strings = hdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra3]
-description = Digital Surround 5.1 (HDMI 4/DTS)
-device-strings = dcahdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra4]
-description = Digital Stereo (HDMI 5)
-device-strings = hdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra4]
-description = Digital Surround 5.1 (HDMI 5)
-device-strings = hdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra4]
-description = Digital Surround 7.1 (HDMI 5)
-device-strings = hdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra4]
-description = Digital Surround 5.1 (HDMI 5/DTS)
-device-strings = dcahdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra5]
-description = Digital Stereo (HDMI 6)
-device-strings = hdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra5]
-description = Digital Surround 5.1 (HDMI 6)
-device-strings = hdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra5]
-description = Digital Surround 7.1 (HDMI 6)
-device-strings = hdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra5]
-description = Digital Surround 5.1 (HDMI 6/DTS)
-device-strings = dcahdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra6]
-description = Digital Stereo (HDMI 7)
-device-strings = hdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra6]
-description = Digital Surround 5.1 (HDMI 7)
-device-strings = hdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra6]
-description = Digital Surround 7.1 (HDMI 7)
-device-strings = hdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra6]
-description = Digital Surround 5.1 (HDMI 7/DTS)
-device-strings = dcahdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra7]
-description = Digital Stereo (HDMI 8)
-device-strings = hdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra7]
-description = Digital Surround 5.1 (HDMI 8)
-device-strings = hdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra7]
-description = Digital Surround 7.1 (HDMI 8)
-device-strings = hdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra7]
-description = Digital Surround 5.1 (HDMI 8/DTS)
-device-strings = dcahdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra8]
-description = Digital Stereo (HDMI 9)
-device-strings = hdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra8]
-description = Digital Surround 5.1 (HDMI 9)
-device-strings = hdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra8]
-description = Digital Surround 7.1 (HDMI 9)
-device-strings = hdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra8]
-description = Digital Surround 5.1 (HDMI 9/DTS)
-device-strings = dcahdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra9]
-description = Digital Stereo (HDMI 10)
-device-strings = hdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra9]
-description = Digital Surround 5.1 (HDMI 10)
-device-strings = hdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra9]
-description = Digital Surround 7.1 (HDMI 10)
-device-strings = hdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra9]
-description = Digital Surround 5.1 (HDMI 10/DTS)
-device-strings = dcahdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra10]
-description = Digital Stereo (HDMI 11)
-device-strings = hdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra10]
-description = Digital Surround 5.1 (HDMI 11)
-device-strings = hdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra10]
-description = Digital Surround 7.1 (HDMI 11)
-device-strings = hdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra10]
-description = Digital Surround 5.1 (HDMI 11/DTS)
-device-strings = dcahdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping multichannel-output]
-device-strings = hw:%f
-channel-map = left,right,rear-left,rear-right
-exact-channels = false
-fallback = yes
-priority = 1
-direction = output
-
-[Mapping multichannel-input]
-device-strings = hw:%f
-channel-map = left,right,rear-left,rear-right
-exact-channels = false
-fallback = yes
-priority = 1
-direction = input
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf
deleted file mode 100644
index 1186552..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf
+++ /dev/null
@@ -1,55 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Dell Dock TB16 USB audio
-;
-; This card has two stereo pairs of output, One Mono input.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-headphone]
-description = Headphone
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-speaker]
-description = Speaker
-device-strings = hw:%f,1,0
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-mic]
-description = Headset-Mic
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = input
-
-
-[Profile output:analog-stereo-speaker]
-description = Speaker
-output-mappings = analog-stereo-speaker
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone+input:analog-stereo-mic]
-description = Headset
-output-mappings = analog-stereo-headphone
-input-mappings = analog-stereo-mic
-priority = 80
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf
deleted file mode 100644
index 41924f4..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf
+++ /dev/null
@@ -1,153 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; This profile forces speaker and internal mic ports even if we have no way
-; of identifying those.
-; See default.conf for explanations.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-4-channel-input]
-# Alsa doesn't currently provide any better device name than "hw" for 4-channel
-# input. If this causes trouble at some point, then we will need to get a new
-# device name standardized in alsa.
-device-strings = hw:%f
-channel-map = aux0,aux1,aux2,aux3
-priority = 1
-direction = input
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = iec958-stereo-output
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping iec958-dts-surround-51]
-device-strings = dca:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-description = Digital Stereo (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = left,right
-priority = 4
-direction = output
-
-[Mapping hdmi-surround]
-description = Digital Surround 5.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-surround71]
-description = Digital Surround 7.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 3
-direction = output
-
-[Mapping hdmi-dts-surround]
-description = Digital Surround 5.1 (HDMI/DTS)
-device-strings = dcahdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf
deleted file mode 100644
index dec57d5..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf
+++ /dev/null
@@ -1,152 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; This profile forces a speaker port even if we have no way of identifying it.
-; See default.conf for explanations.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-4-channel-input]
-# Alsa doesn't currently provide any better device name than "hw" for 4-channel
-# input. If this causes trouble at some point, then we will need to get a new
-# device name standardized in alsa.
-device-strings = hw:%f
-channel-map = aux0,aux1,aux2,aux3
-priority = 1
-direction = input
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = iec958-stereo-output
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping iec958-dts-surround-51]
-device-strings = dca:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-description = Digital Stereo (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = left,right
-priority = 4
-direction = output
-
-[Mapping hdmi-surround]
-description = Digital Surround 5.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-surround71]
-description = Digital Surround 7.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 3
-direction = output
-
-[Mapping hdmi-dts-surround]
-description = Digital Surround 5.1 (HDMI/DTS)
-device-strings = dcahdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf
deleted file mode 100644
index a683a4e..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf
+++ /dev/null
@@ -1,35 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; HP Thunderbolt Dock 120W G2
-;
-; This dock has a 3.5mm headset connector. Both input and output are stereo.
-;
-; There's a separate speakerphone module called "HP Thunderbolt Dock Audio
-; Module", which can be attached to this dock. The module will appear in ALSA
-; as a separate USB sound card, configuration for it is in
-; hp-tbt-dock-audio-module.conf.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-headset]
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Profile output:analog-stereo-headset+input:analog-stereo-headset]
-output-mappings = analog-stereo-headset
-input-mappings = analog-stereo-headset
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf
deleted file mode 100644
index 692ab8d..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf
+++ /dev/null
@@ -1,36 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; HP Thunderbolt Dock Audio Module
-;
-; This device attaches to the "HP Thunderbolt Dock 120W G2" dock. The audio
-; module provides a speakerphone with echo cancellation and appears in ALSA as
-; a USB sound card with stereo input and output.
-;
-; The dock itself has a 3.5mm headset connector and appears as a separate USB
-; sound card, configuration for it is in hp-tbt-dock-120w-g2.conf.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-speakerphone]
-device-strings = hw:%f,0,0
-channel-map = left,right
-intended-roles = phone
-
-[Profile output:analog-stereo-speakerphone+input:analog-stereo-speakerphone]
-output-mappings = analog-stereo-speakerphone
-input-mappings = analog-stereo-speakerphone
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf
deleted file mode 100644
index d51fd17..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Audio profile for the Microsoft Kinect Sensor device in UAC mode.
-;
-; Copyright (C) 2011  Antonio Ospite <ospite@studenti.unina.it>
-;
-; This device has an array of four microphones, and no playback capability.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping input-4-channels]
-device-strings = hw:%f
-channel-map = front-left,front-right,rear-left,rear-right
-description = 4 Channels Input
-direction = input
-priority = 5
-
-[Profile input:mic-array]
-description = Microphone Array
-input-mappings = input-4-channels
-priority = 2
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf
deleted file mode 100644
index 5122907..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf
+++ /dev/null
@@ -1,86 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; M-Audio FastTrack Pro
-;
-; This card has one duplex stereo channel called A and an additional
-; stereo output channel called B.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a-output]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = output
-
-; Try both device 0 and device 1 for input, see
-; http://mailman.alsa-project.org/pipermail/alsa-devel/2012-March/050701.html
-[Mapping analog-stereo-a-input]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0 hw:%f,1,0
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B
-device-strings = hw:%f,1,0
-channel-map = left,right
-direction = output
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channel A, Analog Stereo output Channel B
-output-mappings = analog-stereo-a-output  analog-stereo-b-output
-input-mappings = analog-stereo-a-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a-output+input:analog-stereo-a-input]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a-output
-input-mappings = analog-stereo-a-input
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b-output
-input-mappings =
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a-output
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a-input
-priority = 2
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf
deleted file mode 100644
index f7cbc15..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf
+++ /dev/null
@@ -1,90 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 4 DJ
-;
-; This card has two stereo pairs of input and two stereo pairs of
-; output, named channels A and B. Channel B has an additional
-; Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B (Headphones)
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b-input]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b-output
-input-mappings = analog-stereo-a analog-stereo-b-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-input-mappings = analog-stereo-b-input
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b-input
-priority = 1
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf
deleted file mode 100644
index dc1b780..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf
+++ /dev/null
@@ -1,161 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 8 DJ
-;
-; This card has four stereo pairs of input and four stereo pairs of
-; output, named channels A to D. Channel C has an additional Mic/Line
-; connector, channel D an additional Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-
-# Since we want to set a different description for channel C's/D's input
-# and output we define two separate mappings for them
-[Mapping analog-stereo-c-output]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C (Line/Mic)
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-output]
-description = Analog Stereo Channel D (Headphones)
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-c]
-description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-c-input
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
-description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
-output-mappings = analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 80
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-b
-input-mappings = analog-stereo-b
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-c+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C (Line/Mic)
-output-mappings = analog-stereo-c-output
-input-mappings = analog-stereo-c-input
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-d-input
-priority = 70
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 6
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-c]
-description = Analog Stereo Output Channel C
-output-mappings = analog-stereo-c-output
-priority = 7
-skip-probe = yes
-
-[Profile output:analog-stereo-d]
-description = Analog Stereo Output Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-priority = 8
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b
-priority = 1
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C (Line/Mic)
-input-mappings = analog-stereo-c-input
-priority = 4
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 3
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf
deleted file mode 100644
index 92b89da..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf
+++ /dev/null
@@ -1,111 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Komplete Audio 6
-;
-; This card has three stereo pairs of input and three stereo pairs of
-; output.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-out-ab]
-description = Analog Stereo 1/2
-device-strings = hw:%f,0,0
-channel-map = left,right,aux0,aux1,aux2,aux3
-direction = output
-
-[Mapping analog-stereo-out-cd]
-description = Analog Stereo 3/4
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,left,right,aux2,aux3
-direction = output
-
-[Mapping stereo-out-ef]
-description = Analog Stereo 5/6
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,aux2,aux3,left,right
-direction = output
-
-[Mapping analog-mono-in-a]
-description = Analog Mono Input 1
-device-strings = hw:%f,0,0
-channel-map = mono,aux0,aux1,aux2,aux3,aux4
-direction = input
-
-[Mapping analog-mono-in-b]
-description = Anlog Mono Input 2
-device-strings = hw:%f,0,0
-channel-map = aux0,mono,aux1,aux2,aux3,aux4
-direction = input
-
-[Mapping analog-stereo-in-ab]
-description = Analog Stereo Input 1/2
-device-strings = hw:%f,0,0
-channel-map = left,right,aux0,aux1,aux2,aux3
-direction = input
-
-[Mapping analog-stereo-in-cd]
-description = Analog Stereo Input 3/4
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,left,right,aux2,aux3
-direction = input
-
-[Mapping stereo-in-ef]
-description = Stereo Input 5/6
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,aux2,aux3,left,right
-direction = input
-
-[Profile output:analog-stereo-out-ab+input:analog-stereo-in-ab]
-description = Analog Stereo Output 1/2, Analog Stereo Input 1/2
-output-mappings = analog-stereo-out-ab
-input-mappings = analog-stereo-in-ab
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-out-ab+input:analog-mono-in-a]
-description = Analog Stereo Output 1/2, Analog Mono Input 1
-output-mappings = analog-stereo-out-ab
-input-mappings = analog-mono-in-a
-priority = 95
-skip-probe = yes
-
-[Profile output:analog-stereo-out-ab+input:analog-mono-in-b]
-description = Analog Stereo Output 1/2, Analog Mono Input 2
-output-mappings = analog-stereo-out-ab
-input-mappings = analog-mono-in-b
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-out-cd+input:analog-stereo-in-cd]
-description = Analog Stereo Output 3/4, Analog Stereo Input 3/4
-output-mappings = analog-stereo-out-cd
-input-mappings = analog-stereo-in-cd
-priority = 80
-skip-probe = yes
-
-[Profile output:stereo-out-ef+input:stereo-in-ef]
-description = Stereo Output 5/6 (S/PDIF), Stereo Input 5/6 (S/PDIF)
-output-mappings = stereo-out-ef
-input-mappings = stereo-in-ef
-priority = 70
-skip-probe = yes
-
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf
deleted file mode 100644
index 35b3d06..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf
+++ /dev/null
@@ -1,84 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Kore Controller
-;
-; This card has one stereo pairs of input and two stereo pairs of
-; output, named "Master" and "Headphone". The master channel has
-; an additional Coax S/PDIF connector which is always on.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-master-out]
-description = Analog Stereo Master Channel
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-headphone-out]
-description = Analog Stereo Headphone Channel
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-input]
-description = Analog Stereo
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Master Output, Headphones Output
-output-mappings = analog-stereo-master-out analog-stereo-headphone-out
-input-mappings = analog-stereo-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-master+input:analog-stereo-input]
-description = Analog Stereo Duplex Master Output
-output-mappings = analog-stereo-master-out
-input-mappings = analog-stereo-input
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone-out+input:analog-stereo-input]
-description = Analog Stereo Headphones Output
-output-mappings = analog-stereo-headphone-out
-input-mappings = analog-stereo-input
-priority = 30
-skip-probe = yes
-
-[Profile output:analog-stereo-master]
-description = Analog Stereo Master Output
-output-mappings = analog-stereo-master-out
-priority = 3
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone]
-description = Analog Stereo Headphones Output
-output-mappings = analog-stereo-headphone-out
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-input]
-description = Analog Stereo Input
-input-mappings = analog-stereo-input
-priority = 1
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf
deleted file mode 100644
index c210297..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf
+++ /dev/null
@@ -1,130 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 10 DJ
-;
-; This card has five stereo pairs of input and five stereo pairs of
-; output
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-out-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-out-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-c]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-d]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-in-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-in-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-c]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-d]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-
-
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels Main, A, B, C, D
-output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b analog-stereo-out-c analog-stereo-out-d
-input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b analog-stereo-in-c analog-stereo-in-d
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-main+input:analog-stereo-main]
-description = Analog Stereo Duplex Main
-output-mappings = analog-stereo-out-main
-input-mappings = analog-stereo-in-main
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-out-a
-input-mappings = analog-stereo-in-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-out-b
-input-mappings = analog-stereo-in-b
-priority = 30
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C
-output-mappings = analog-stereo-out-c
-input-mappings = analog-stereo-in-c
-priority = 20
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D
-output-mappings = analog-stereo-out-d
-input-mappings = analog-stereo-in-d
-priority = 10
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf
deleted file mode 100644
index 145dace..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf
+++ /dev/null
@@ -1,53 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Traktor Audio 2
-;
-; This card has two stereo pairs of output.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 50
-skip-probe = yes
-
-[Profile analog-stereo-all]
-description = Analog Stereo Output Channels A & B
-output-mappings = analog-stereo-a analog-stereo-b
-priority = 100
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf
deleted file mode 100644
index a08e9fc..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf
+++ /dev/null
@@ -1,91 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 6 DJ
-;
-; This card has three stereo pairs of input and three stereo pairs of
-; output
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-out-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-out-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-in-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-in-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b
-input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-main+input:analog-stereo-main]
-description = Analog Stereo Duplex Channel Main
-output-mappings = analog-stereo-out-main
-input-mappings = analog-stereo-in-main
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-out-a
-input-mappings = analog-stereo-in-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-out-b
-input-mappings = analog-stereo-in-b
-priority = 30
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf
deleted file mode 100644
index 934965f..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf
+++ /dev/null
@@ -1,80 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Traktor Kontrol S4
-;
-; This controller has two stereo pairs of input (named "Channel C" and
-; "Channel D") and two stereo pairs of output, one "Main Out" and
-; "Headphone Out".
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-output-main]
-description = Analog Stereo Main Out
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-output-headphone]
-description = Analog Stereo Headphones Out
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex
-output-mappings = analog-stereo-output-main analog-stereo-output-headphone
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-main]
-description = Analog Stereo Main Output
-output-mappings = analog-stereo-output-main
-priority = 4
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone]
-description = Analog Stereo Output Headphones Out
-output-mappings = analog-stereo-output-headphone
-priority = 3
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C
-input-mappings = analog-stereo-c-input
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 1
-skip-probe = yes
-
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf
deleted file mode 100644
index d5d1d65..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf
+++ /dev/null
@@ -1,112 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Creative Sound Blaster Omni Surround 5.1
-;
-; This config supports Linux 4.3-rc1+.
-; By default there are some non-existing (physically) inputs and outputs that
-; are not present in this config.
-; Also in addition to natively supported modes (such as stereo, 5.1 and stereo
-; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0.
-;
-; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-input]
-device-strings = hw:%f
-channel-map = left,right
-paths-input = analog-input-mic analog-input-linein
-direction = input
-
-[Mapping analog-stereo-output]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-21]
-device-strings = surround51:%f
-channel-map = front-left,front-right,aux1,aux2,aux3,lfe
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-output = iec958-stereo-output
-direction = output
-
-[Profile output:analog-stereo-output+input:analog-stereo-input]
-output-mappings = analog-stereo-output
-input-mappings = analog-stereo-input
-priority = 7
-
-[Profile output:analog-surround-21+input:analog-stereo-input]
-output-mappings = analog-surround-21
-input-mappings = analog-stereo-input
-priority = 6
-
-[Profile output:analog-surround-40+input:analog-stereo-input]
-output-mappings = analog-surround-40
-input-mappings = analog-stereo-input
-priority = 5
-
-[Profile output:analog-surround-41+input:analog-stereo-input]
-output-mappings = analog-surround-41
-input-mappings = analog-stereo-input
-priority = 4
-
-[Profile output:analog-surround-50+input:analog-stereo-input]
-output-mappings = analog-surround-50
-input-mappings = analog-stereo-input
-priority = 3
-
-[Profile output:analog-surround-51+input:analog-stereo-input]
-output-mappings = analog-surround-51
-input-mappings = analog-stereo-input
-priority = 2
-
-[Profile output:iec958-stereo+input:analog-stereo-input]
-output-mappings = iec958-stereo
-input-mappings = analog-stereo-input
-priority = 1
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf
deleted file mode 100644
index 0ac1576..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf
+++ /dev/null
@@ -1,58 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB Gaming DAC.
-; These devices have two output devices. The first one is mono, meant for
-; voice audio, and the second one is 7.1 surround, meant for everything
-; else. The 7.1 surround is mapped to headphones within the device.
-; The purpose of the mono/7.1 design is to provide separate volume
-; controls for voice and other audio, which can be useful in gaming.
-;
-; Works with:
-; Sennheiser GSX 1000
-; Sennheiser GSX 1200
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-chat-output]
-device-strings = hw:%f,0
-channel-map = mono
-paths-output = analog-chat-output
-direction = output
-priority = 4000
-intended-roles = phone
-
-[Mapping analog-output-surround71]
-device-strings = hw:%f,1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-paths-output = virtual-surround-7.1
-priority = 4100
-direction = output
-
-[Mapping analog-chat-input]
-device-strings = hw:%f,0
-channel-map = mono
-paths-input = analog-chat-input
-priority = 4100
-direction = input
-
-[Profile output:analog-output-surround71+output:analog-output-chat+input:analog-input]
-output-mappings = analog-output-surround71 analog-chat-output
-input-mappings = analog-chat-input
-priority = 5100
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf
deleted file mode 100644
index 809d015..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf
+++ /dev/null
@@ -1,42 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; This is a profile meant for simple (stereo + mic) headphones.
-; default.conf also works but using this one will hide some profiles
-; that don't make sense like IEC958 and multichannel inputs.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 15
-
-# If everything else fails, try to use hw:0 as a stereo device...
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-[Mapping analog-mono]
-device-strings = hw:%f,0,0
-channel-map = mono
-direction = input
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf
deleted file mode 100644
index 0c58917..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-[General]
-auto-profiles = yes
-
-[Mapping analog-chat]
-description-key = gaming-headset-chat
-device-strings = hw:%f,0,0
-channel-map = left,right
-paths-input = analog-input-mic
-paths-output = steelseries-arctis-output-chat-common
-intended-roles = phone
-
-[Mapping analog-game]
-description-key = gaming-headset-game
-device-strings = hw:%f,1,0
-channel-map = left,right
-paths-output = steelseries-arctis-output-game-common
-direction = output
-
-[Profile output:analog-chat+output:analog-game+input:analog-chat]
-output-mappings = analog-chat analog-game
-input-mappings = analog-chat
-priority = 5100
-skip-probe = yes
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf
deleted file mode 100644
index 6c44736..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf
+++ /dev/null
@@ -1,136 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned (and should be good enough for the vast majority of
-; cards). If you want to assign a different profile set than this one
-; to a device, either set the udev property PULSE_PROFILE_SET for the
-; card, or use the "profile_set" module argument when loading
-; module-alsa-card.
-;
-; So what is this about? Simply, what we do here is map ALSA devices
-; to how they are exposed in PA. We say which ALSA device string to
-; use to open a device, which channel mapping to use then, and which
-; mixer path to use. This is encoded in a 'mapping'. Multiple of these
-; mappings can be bound together in a 'profile' which is then directly
-; exposed in the UI as a card profile. Each mapping assigned to a
-; profile will result in one sink/source to be created if the profile
-; is selected for the card.
-;
-; Additionally, the path set configuration files can describe the
-; decibel values assigned to the steps of the volume elements. This
-; can be used to work around situations when the alsa driver doesn't
-; provide any decibel information, or when the information is
-; incorrect.
-
-
-; [General]
-; auto-profiles = no | yes                  # Instead of defining all profiles manually, autogenerate
-;                                           # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ...                      # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ...                         # Channel mapping to use for this device
-; description = ...
-; paths-input = ...                         # A list of mixer paths to use. Every path in this list will be probed.
-;                                           # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ...                       # Instead of configuring a full mixer path simply configure a single
-;                                           # mixer element for volume/mute handling
-; element-output = ...
-; priority = ...
-; direction = any | input | output          # Only useful for?
-;
-; [Profile id]
-; input-mappings = ...                      # Lists mappings for sources on this profile, those mapping must be
-;                                           # defined in this file too
-; output-mappings = ...                     # Lists mappings for sinks on this profile, those mappings must be
-;                                           # defined in this file too
-; description = ...
-; priority = ...                            # Numeric value to deduce priority for this profile
-; skip-probe = no | yes                     # Skip probing for availability? If this is yes then this profile
-;                                           # will be assumed as working without probing. Makes initialization
-;                                           # a bit faster but only works if the card is really known well.
-;
-; [DecibelFix element]                      # Decibel fixes can be used to work around missing or incorrect dB
-;                                           # information from alsa. A decibel fix is a table that maps volume steps
-;                                           # to decibel values for one volume element. The "element" part in the
-;                                           # section title is the name of the volume element.
-;                                           #
-;                                           # NOTE: This feature is meant just as a help for figuring out the correct
-;                                           # decibel values. PulseAudio is not the correct place to maintain the
-;                                           # decibel mappings!
-;                                           #
-;                                           # If you need this feature, then you should make sure that when you have
-;                                           # the correct values figured out, the alsa driver developers get informed
-;                                           # too, so that they can fix the driver.
-;
-; db-values = ...                           # The option value consists of pairs of step numbers and decibel values.
-;                                           # The pairs are separated with whitespace, and steps are separated from
-;                                           # the corresponding decibel values with a colon. The values must be in an
-;                                           # increasing order. Here's an example of a valid string:
-;                                           #
-;                                           #     "0:-40.50  1:-38.70  3:-33.00  11:0"
-;                                           #
-;                                           # The lowest step imposes a lower limit for hardware volume and the
-;                                           # highest step correspondingly imposes a higher limit. That means that
-;                                           # that the mixer will never be set outside those values - the rest of the
-;                                           # volume scale is done using software volume.
-;                                           #
-;                                           # As can be seen in the example, you don't need to specify a dB value for
-;                                           # each step. The dB values for skipped steps will be linearly interpolated
-;                                           # using the nearest steps that are given.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping usb-analog-stereo]
-device-strings = hw:%f
-channel-map = left,right
-paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping usb-analog-surround-51]
-device-strings = hw:%f
-;channel-map = front-left,front-right,front-center,lfe,rear-left,rear-right
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-lfe-on-mono
-priority = 180
-direction = output
-
-[Mapping multichannel-input]
-device-strings = hw:%f
-channel-map = left,right,rear-left,rear-right
-exact-channels = false
-fallback = yes
-priority = 1
-direction = input
-paths-input = multichannel-input
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf b/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf
deleted file mode 100644
index adda54d..0000000
--- a/media-config-target-artik10/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset.
-; These headsets usually have two output devices. The first one is meant
-; for voice audio, and the second one is meant for everything else.
-; The purpose of this unusual design is to provide separate volume
-; controls for voice and other audio, which can be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-; Astro A50
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = yes
-
-[Mapping mono-chat]
-description-key = gaming-headset-chat
-device-strings = hw:%f,0,0
-channel-map = mono
-paths-output = usb-gaming-headset-output-mono
-paths-input = usb-gaming-headset-input
-intended-roles = phone
-
-[Mapping stereo-chat]
-description-key = gaming-headset-chat
-device-strings = hw:%f,0,0
-channel-map = left,right
-paths-output = usb-gaming-headset-output-stereo
-paths-input = usb-gaming-headset-input
-intended-roles = phone
-
-[Mapping stereo-game]
-description-key = gaming-headset-game
-device-strings = hw:%f,1,0
-channel-map = left,right
-paths-output = usb-gaming-headset-output-stereo
-direction = output
-
-[Profile output:mono-chat+output:stereo-game+input:mono-chat]
-output-mappings = mono-chat stereo-game
-input-mappings = mono-chat
-priority = 5100
-
-[Profile output:stereo-game+output:stereo-chat+input:mono-chat]
-output-mappings = stereo-game stereo-chat
-input-mappings = mono-chat
-priority = 5100
diff --git a/media-config-target-rpi3-spk.manifest b/media-config-target-rpi3-spk.manifest
deleted file mode 100644
index a76fdba..0000000
--- a/media-config-target-rpi3-spk.manifest
+++ /dev/null
@@ -1,5 +0,0 @@
-<manifest>
-	<request>
-		<domain name="_" />
-	</request>
-</manifest>
diff --git a/media-config-target-rpi3-spk/hal/etc/asound.conf b/media-config-target-rpi3-spk/hal/etc/asound.conf
deleted file mode 100644
index 5f733c6..0000000
--- a/media-config-target-rpi3-spk/hal/etc/asound.conf
+++ /dev/null
@@ -1,11 +0,0 @@
-# default sound configuration
-
-pcm. !default {
-	type hw
-	card ALSA
-}
-
-ctl. !default {
-	type hw
-	card ALSA
-}
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_audio_pcm_dump.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_audio_pcm_dump.ini
deleted file mode 100644
index 6e13b68..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_audio_pcm_dump.ini
+++ /dev/null
@@ -1,8 +0,0 @@
-[pcm_dump]
-;playback
-pa_sink = 0
-pa_sink_input = 0
-
-;capture
-pa_source = 0
-pa_source_output = 0
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_audio_volume.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_audio_volume.ini
deleted file mode 100644
index ae7e635..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_audio_volume.ini
+++ /dev/null
@@ -1,19 +0,0 @@
-[volumes]
-system                         = 0, 72, 73, 74, 75, 76, 77, 78, 80, 81, 82, 84, 86, 88, 90, 94
-notification                   = 0, 68, 70, 72, 73, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 97
-alarm                          = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92
-ringtone                       = 0, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83, 85, 87, 89, 92
-media                          = 0, 46, 50, 53, 58, 62, 68, 72, 76, 80, 84, 87, 90, 93, 96, 100
-call                           = 60, 65, 70, 76, 82, 88, 94, 100
-voip                           = 60, 65, 70, 76, 82, 88, 94, 100
-voice                          = 0, 55, 58, 61, 64, 67, 70, 75, 78, 82, 86, 89, 91, 94, 97, 100
-gain_dialer                    = 1.00
-gain_touch                     = 1.00
-gain_af                        = 0.70
-gain_shutter1                  = 0.14
-gain_shutter2                  = 1.00
-gain_camcording                = 0.30
-gain_midi                      = 1.00
-gain_booting                   = 0.40
-gain_video                     = 0.90
-gain_tts                       = 1.00
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_camcorder.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_camcorder.ini
deleted file mode 100644
index 4d3e0ce..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_camcorder.ini
+++ /dev/null
@@ -1,102 +0,0 @@
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1.  General
-; 2.  VideoInput
-; 3.  AudioInput
-; 4.  VideoOutput
-; 5.  Capture
-; 6.  Record
-; 7.  VideoEncoder
-; 8.  AudioEncoder
-; 9.  ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-; LogLevel(default:3)
-;;; 0:Critical, 1: Error, 2: Warning, 3: Info, 4: Debug, 5: Verbose
-LogLevel = 3
-
-[VideoInput]
-VideosrcElement = tizencamerasrc | 1,0 | do-timestamp,1
-UseVideoscale = 1
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 0
-DeviceCount = 1
-
-[AudioInput]
-AudioDevice = 0,1 || 0
-AudiosrcElement = pulsesrc | 1,0 | do-timestamp,1
-AudiomodemsrcElement = pulsesrc | 1,0 | do-timestamp,1
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: Overlay surface, 1: Evas surface, 2: GL surface, 3: NULL surface, 4: Remote
-Videosink = 0,3,4 || 3
-VideosinkElementOverlay = tizenwlsink | 7,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-sample,0 | qos,0 | sync,0 | show-preroll-frame,0 | use-tbm,0
-VideosinkElementRemote = shmsink | 5,0 | wait-for-connection,0 | perms,511 | enable-last-sample,0 | qos,0 | sync,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-sample,0 | show-preroll-frame,0
-UseVideoconvert = 1
-VideoconvertElement = videoconvert | 0,0
-
-[VideoEncoder]
-MPEG4 = avenc_mpeg4 | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = avenc_aac | 1,0 | compliance,-2
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = jpegenc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-; CaptureMode
-;;; 0: Encodebin, 1: Camera control(plugin), 2: Image pad(plugin)
-CaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 0
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 1
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = 3gppmux | 0,0
-AMR = avmux_amr | 0,0
-MP4 = mp4mux | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = avmux_adts | 0,0
-M2TS = mpegtsmux | 0,0
-
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_camcorder_camera0.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_camcorder_camera0.ini
deleted file mode 100644
index 728196e..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_camcorder_camera0.ini
+++ /dev/null
@@ -1,208 +0,0 @@
-; < Camera/Camcorder Configure Control INI file >
-;
-; - Header List -
-; 1.  Camera
-; 2.  Strobe
-; 3.  Effect
-; 4.  Photograph
-; 5.  Capture
-; 6.  Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = 0,-255 || 0
-DeviceName = USB_CAMERA
-PreviewResolution = 320,240 | 640,480 || 320,240
-CaptureResolution = 320,240 | 640,480 || 640,480
-VideoResolution = 320,240 | 640,480 || 640,480
-FPS0 = 0,15,30 || 15
-FPS1 = 0,15,30 || 15
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
-PictureFormat = 7 || 7
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 0
-; Recommend preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
-RecommendPreviewFormatCapture = 7
-; Recommend preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
-RecommendPreviewFormatRecord = 7
-; Recommend preview resolution
-;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9), 2: SQUARE ratio(1:1)
-RecommendPreviewResolution = 320,240 | 320,240 | 320,240 || 320,240
-; Camera facing direction
-;;; 0:REAR, 1:FRONT
-FacingDirection = 0
-FrameStabilityCount = 1
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; N/A
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 0,-255,-255,-255,-255,-255,-255,-255 || 0
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 0,8 || 4
-;Contrast = 1,7 || 4
-;Saturation = 0,4 || 2
-;Sharpness = 0,4 || 2
-
-; White balance - real setting value
-;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Color tone - real setting value
-;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM
-;;; 11:VINTAGE_COLD, 12:SOLARIZE, 13:POSTERIZE, 14:POINT_BLUE, 15:POINT_RED_YELLOW, 16:POINT_COLOR_3, 17:POINT_GREEN, 18:POINT_RED, 19:POINT_YELLOW, 20:CARTOONIZE
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED,
-;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW
-ColorTone = 1,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 1
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 0:OFF, 1:ON
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 0,-255,-255 || 0
-
-; Part color mode - real setting value
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-; Part color mode - MSL value(convert array index)
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-;PartColorMode = 0,1,2 || 0
-
-; Part color - real setting value
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-; Part color - MSL value(convert array index)
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-;DigitalZoom = 0,10 || 0
-;OpticalZoom = 0,0 || 0
-
-; Focus mode - real setting value
-;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = 0,-255,-255,-255,-255,-255 || 0
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = 0,-255,-255,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1  3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0
-
-;ExposureValue - Not support
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
-;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Anti-handshake - real setting value
-;;; 0:OFF, 1:ON
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-AntiHandshake = 0,-255,-255,-255 || 0
-
-; Video-stabilization - real setting value
-;;; 0:OFF, 1:ON
-; Video-stabilization - MSL value(convert array index)
-;;; 0:OFF, 1:ON
-VideoStabilization = 0 || 0
-
-; Face zoom mode
-;;; 0:OFF, 1:ON
-FaceZoomMode = 0 || 0
-; Face zoom level
-FaceZoomLevel = 0,0 || 0
-
-; PTZ(Pan Tilt Zoom) type
-;;; 0:Mechanical, 1:Electronic
-;PtzType = 0,1 || 1
-
-; Pan range for mechanical movement
-;PanMecha = -10,10
-
-; Pan range for electronic movement
-;PanElec = -10,10
-
-; Tilt range for mechanical movement
-;TiltMecha = -10,10
-
-; Tilt range for electronic movement
-;TiltElec = -10,10
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-OutputMode = 7,13 || 13
-JpegQuality = 0,100 || 90
-MultishotNumber = 1,1 || 1
-SensorEncodedCapture = 0
-; Support HDR
-;;; 0: OFF, 1: ON, 2: ON and Original
-SupportHDR = 0,-255,-255 || 0
-FrameStabilityCount = 2
-
-
-[Detect]
-; Detect mode
-;;; 0:OFF, 1:ON
-DetectMode = 0,-255 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_image_util.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_image_util.ini
deleted file mode 100644
index 445703c..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_image_util.ini
+++ /dev/null
@@ -1,4 +0,0 @@
-[jpeg-xl]
-; num of threads for jpeg-xl image format
-decoding_threads=4
-encoding_threads=3
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_codec.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_codec.ini
deleted file mode 100644
index 9f2a5dd..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_codec.ini
+++ /dev/null
@@ -1,89 +0,0 @@
-[h261]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = , ,
-sw_encoder = , ,
-
-[h263]
-hw_decoder = omxdec_h263, video/x-h263, NV12
-hw_encoder = omxenc_h263, video/x-raw,  H263
-sw_decoder = avdec_h263,   video/x-h263, I420
-sw_encoder = avenc_h263,   video/x-raw,  H263
-
-[h264]
-hw_decoder = omxdec_h264, video/x-h264, NV12
-hw_encoder = omxenc_h264, video/x-raw,  H264_SP
-sw_decoder = avdec_h264,   video/x-h264, I420
-sw_encoder = avenc_h264,   video/x-raw,  H264_SP
-
-[mpeg4]
-hw_decoder = omxdec_mpeg4, video/mpeg, NV12
-hw_encoder = omxenc_mpeg4, video/x-raw,  MPEG4_SP
-sw_decoder = avdec_mpeg4,   video/mpeg, I420
-sw_encoder = avenc_mpeg4,   video/x-raw,  MPEG4_SP
-
-[aac_lc]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_aac,   audio/mpeg, PCM_F32LE
-sw_encoder = avenc_aac,   audio/x-raw, AAC_LC
-
-[aac_he]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_aac,   audio/mpeg, PCM_F32LE
-sw_encoder = , ,
-
-[aac_he_ps]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_aac,   audio/mpeg, PCM_F32LE
-sw_encoder = , ,
-
-[mp3]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_mp3,   audio/mpeg, PCM_F32LE
-sw_encoder = , ,
-
-[amr_nb]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_amrnb,   audio/AMR, PCM_F32LE
-sw_encoder = amrnbenc, audio/x-raw, AMR_NB
-
-[amr_wb]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_amrwb,   audio/AMR-WB, PCM_F32LE
-sw_encoder = , ,
-
-[vorbis]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = vorbisdec,   audio/x-vorbis, PCM_F32LE
-sw_encoder = , ,
-
-[flac]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_flac,   audio/x-flac, PCM_F32LE
-sw_encoder = , ,
-
-[wmav1]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_wmav1,   audio/x-wma, PCM_F32LE
-sw_encoder = , ,
-
-[wmav2]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_wmav2,   audio/x-wma, PCM_F32LE
-sw_encoder = , ,
-
-[wmapro]
-hw_decoder = , ,
-hw_encoder = , ,
-sw_decoder = avdec_wmapro,   audio/x-wma, PCM_F32LE
-sw_encoder = , ,
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_editor.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_editor.ini
deleted file mode 100644
index 1475618..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_editor.ini
+++ /dev/null
@@ -1,20 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot path = /tmp
-
-; | separated list of arguments that will pass to gst_init
-gstreamer arguments = --gst-disable-registry-update|--gst-disable-registry-fork|--gst-disable-segtrap|--gst-debug=*ges*:3,2
-
-[encoder]
-container = ogg
-audio hw encoder =
-video hw encoder =
-
-[decoder]
-audio hw decoder =
-video hw decoder =
-
-[resource acquisition]
-video encoder = no
-video decoder = no
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_streamer.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_streamer.ini
deleted file mode 100644
index 527ab99..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_streamer.ini
+++ /dev/null
@@ -1,124 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot dir =
-
-; decodebin will be used instead of decoder node
-use decodebin = yes
-
-; comma separated list of element names which
-; will not be used in autoplug mode
-exclude elements = v4l2video,v4l2h264,v4l2mpeg4,omx,sprd
-
-; comma separated list of element names which
-; will require resources in autoplug mode
-resource elements = omx,sprd
-
-; comma separated list of arguments
-; that will pass to gst_init
-gstreamer arguments = --gst-debug=2
-
-
-;MEDIA_STREAMER_NODE_TYPE_SRC
-[node type 1]
-audio capture = pulsesrc
-video capture = waylandsrc
-camera = v4l2src
-
-;MEDIA_STREAMER_NODE_TYPE_SINK
-[node type 2]
-audio = pulsesink
-overlay = tizenwlsink
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_ENCODER
-[node type 3]
-video/x-h263 = avenc_h263
-;video/x-h264 =
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_DECODER
-[node type 4]
-video/x-h263 = avdec_h263
-;video/x-h264 =
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_ENCODER
-[node type 5]
-audio/AMR = amrnbenc
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_DECODER
-[node type 6]
-audio/AMR = amrnbdec
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_CONVERTER
-[node type 7]
-video/x-raw = videoconvert
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_CONVERTER
-[node type 8]
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_RESAMPLE
-[node type 9]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_PAY
-[node type 10]
-video/x-h263 = rtph263pay
-;video/x-h264 =
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_PAY
-[node type 11]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_DEPAY
-[node type 12]
-video/x-h263 = rtph263depay
-video/x-h264 = rtph264depay
-
-;MEDIA_STREAMER_NODE_TYPE_AUDIO_DEPAY
-[node type 13]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_RATE
-[node type 14]
-
-;MEDIA_STREAMER_NODE_TYPE_VIDEO_SCALE
-[node type 15]
-
-;MEDIA_STREAMER_NODE_TYPE_TEXT_OVERLAY
-[node type 16]
-text/x-raw = textoverlay
-
-;MEDIA_STREAMER_NODE_TYPE_PARSER
-[node type 17]
-video/x-h263 = h263parse
-video/x-h264 = h264parse
-
-;MEDIA_STREAMER_NODE_TYPE_FILTER
-[node type 18]
-
-;MEDIA_STREAMER_NODE_TYPE_TEE
-[node type 19]
-
-;MEDIA_STREAMER_NODE_TYPE_QUEUE
-[node type 20]
-
-;MEDIA_STREAMER_NODE_TYPE_MQUEUE
-[node type 21]
-
-;MEDIA_STREAMER_NODE_TYPE_MUXER
-[node type 22]
-
-;MEDIA_STREAMER_NODE_TYPE_DEMUXER
-[node type 23]
-
-;MEDIA_STREAMER_NODE_TYPE_RTP
-[node type 24]
-
-;MEDIA_STREAMER_NODE_TYPE_INPUT_SELECTOR
-[node type 25]
-
-;MEDIA_STREAMER_NODE_TYPE_OUTPUT_SELECTOR
-[node type 26]
-
-;MEDIA_STREAMER_NODE_TYPE_INTERLEAVE
-[node type 27]
-
-;MEDIA_STREAMER_NODE_TYPE_DEINTERLEAVE
-[node type 28]
-
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_transporter.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_transporter.ini
deleted file mode 100644
index 504d385..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_media_transporter.ini
+++ /dev/null
@@ -1,118 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot path = /tmp
-
-; enable verbose logging
-verbose log = no
-
-; | separated list of arguments that will pass to gst_init
-gstreamer arguments = --gst-debug=*:2
-
-; comma separated list of elements that will not use in the gstreamer pipeline
-gstreamer excluded elements =
-
-; allowed timeout for changing pipeline state
-timeout = 10 ; sec
-
-[connection]
-rtsp server ip = 127.0.0.1
-rtsp server port = 8554
-rtsp server mount point = /mtpr_server/tmp
-
-[media source]
-; default values for video source pipeline (e.g, videotest, camera, screen)
-video raw format = I420
-video width = 320
-video height = 240
-video framerate = 30
-video codec = mpeg
-video hw encoder element =
-video encoded format support = no
-video drc support = no
-; default values for audio source pipeline (e.g, audiotest, mic)
-audio raw format = F32LE
-audio samplerate = 8000
-audio channels = 2
-audio codec = aac
-audio hw encoder element =
-
-[source videotest]
-source element = videotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1,pattern=18
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codec =
-;video hw encoder element =
-;video encoded format support =
-video drc support = yes
-
-
-[source camera]
-source element = v4l2src
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codec = h264
-;video hw encoder element = v4l2h264enc
-;video encoded format support =
-;video drc support =
-
-
-[source screen]
-source element = waylandsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codec =
-;video hw encoder element =
-;video encoded format support =
-;video drc support =
-
-
-[source audiotest]
-source element = audiotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codec =
-;audio hw encoder element =
-use ulpfec red = no
-
-
-[source mic]
-source element = pulsesrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codec =
-;audio hw encoder element =
-use ulpfec red = no
-
-
-[rendering sink]
-audio sink element = pulsesink
-video sink element = tizenwlsink
-
-; comma separated list of elements, it should be one by one per codec type
-audio hw decoder elements =
-video hw decoder elements =
-
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_player.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_player.ini
deleted file mode 100644
index a4fbc50..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_player.ini
+++ /dev/null
@@ -1,102 +0,0 @@
-[general]
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element overlay = tizenwlsink
-videosink element fake = fakesink
-video converter element =
-
-; decoder element keyword for resource management.
-video codec element hw =
-video codec element sw = avdec
-video codec default type = sw ; hw or sw
-
-audio codec element hw =
-audio codec element sw = avdec
-audio codec default type = sw ; hw or sw
-
-; support with HW audio codec
-support audio effect = no
-support pcm exporting = no
-support pitch control = no
-support replaygain control = no
-
-audiosink element = pulsesink
-
-; audio offload information
-audio offload sink element =
-audio offload device type =    ; builtin-speaker,bt-a2dp,audio-jack,usb-audio from pulse stream-map
-audio offload media format =   ; Use the format keyword of media_format_mimetype_e, MAX:10
-
-; supported input format of external media source stream
-; Use the format keyword of media_format_mimetype_e, MAX:10
-media stream input format = AAC,H264_SP,H264_MP,H264_HP
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-; this works if 'use decodebin = yes'
-element exclude keyword = v4l2,omx
-
-; comma separated list of tocken
-; this works if 'use decodebin = yes'
-unsupported codec keyword = divx
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1 = --gst-debug=*:2
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
-generate dot = no
-
-; parameter is for only video to be determined
-; which clock will be used
-; if yes, system clock will be used
-; apart from this, audiosink is clock provider for audio
-use system clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 0 ; msec
-
-; extracted pcm buffer size
-pcm buffer size = 51200 ; 50Kbytes
-
-; max num of bo for sw codec
-video bo max = 10
-
-; video bo timeout (sec)
-video bo timeout = 10
-
-; setup pipeline with decodebin2
-use decodebin = no
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-http buffering limit = 99.0 ; percent
-
-; if yes, use file for buffering.
-; if no, use memory for buffering.
-http use file buffer = no
-
-; ring buffer size when use mem buffer
-http ring buffer size = 20971520 ; 20MBytes
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_player_audio_effect.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_player_audio_effect.ini
deleted file mode 100644
index 1394608..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_player_audio_effect.ini
+++ /dev/null
@@ -1,17 +0,0 @@
-[audio effect]
-; name of audio effect element
-audio effect element = audioeq
-
-; preset audio effect setting
-audio effect preset = no
-
-; custom audio effect setting (EQ/extension)
-audio effect custom = yes
-audio effect custom list = 0
-
-audio effect custom eq band num = 7 ; number of EQ bands
-audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz)
-audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz)
-
-audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect)
-audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect)
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_resource_manager.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_resource_manager.ini
deleted file mode 100644
index 082f297..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_resource_manager.ini
+++ /dev/null
@@ -1,9 +0,0 @@
-[max volume]
-video_overlay = -1
-video_decoder = -1
-video_encoder = -1
-camera = -1
-
-[priority]
-media = 10
-interrupt = 99
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_streamrecorder.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_streamrecorder.ini
deleted file mode 100644
index 2888707..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_streamrecorder.ini
+++ /dev/null
@@ -1,81 +0,0 @@
-[general]
-;is encsink source is live
-encscink source is live = 0
-
-retrialcount = 10
-
-minimum frame = 5
-
-reset pause time = 0
-
-screen record = 1
-
-convert output buffer num = 6
-
-hw encoder supported = 0 ; 1 if supported and 'video codec element hw' should be formed.
-
-video codec element hw = ; sprd (if verified) or verified hw codec element
-
-[encodebin]
-;MM_STREAMRECORDER_ENCBIN_PROFILE_VIDEO = 0 MM_STREAMRECORDER_ENCBIN_PROFILE_AUDIO = 1
-;MM_STREAMRECORDER_ENCBIN_PROFILE_IMAGE = 2 MM_STREAMRECORDER_ENCBIN_PROFILE_NUM = 3
-encsink bin profile = 0
-
-encsink bin auto audio resample = 0
-
-encsink bin auto colorspace = 1
-
-encsink bin auto audio convert = 1
-
-encsink bin use video toggle = 0
-
-[pipeline]
-encsink bin source = appsrc
-
-name of audio src = pulsesrc
-
-h264 encoder =
-
-h263 encoder = avenc_h263p
-
-mpeg4 encoder = avenc_mpeg4
-
-name of audio encoder = avenc_aac
-
-use parser  =
-
-name of 3GP muxer = avmux_3gp
-
-name of MP4 muxer = avmux_mp4
-
-name of video converter = videoconvert
-
-name of sink = filesink
-
-[video param]
-;/*ms*/
-video frame wait time = 200000
-
-[audio param]
-audio frame minimum space = 102400
-
-audio frame wait time = 20000
-
-[attribute]
-supported height = 1080,720,480,240,288,144
-
-supported width = 1920,1280,640,320,352,176
-
-;/*AMR, AAC, VORBIS ,PCM*/
-supported audio encoders = AMR,AAC,PCM
-
-;/* H263 , H264 , MPEG4 */
-supported video encoders = H263,MPEG4
-
-;/*3GP , AMR, MP4 , WAV, ADTS*/
-supported file formats = 3GP,MP4,AMR,ADTS,WAV
-
-[debug]
-; generating dot file representing pipeline state
-; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell (also do export to '/etc/profile.d/mmf.sh')
-generate dot = no
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_webrtc.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_webrtc.ini
deleted file mode 100644
index d1c5ac0..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_webrtc.ini
+++ /dev/null
@@ -1,169 +0,0 @@
-[general]
-; generating dot file representing pipeline state
-generate dot = no
-dot path = /tmp
-
-; the period(sec) of printing stats logs (0 to disable it)
-stats log period = 0
-
-; enable verbose logging
-verbose log = no
-
-; enable nice verbose logging
-nice verbose = no
-
-; enable network simulator
-network simulator = no
-
-; dump streams into files
-dump incoming streams = no
-dump path = /tmp
-
-; | separated list of arguments that will pass to gst_init
-gstreamer arguments = --gst-debug=webrtc*:7,3
-
-; comma separated list of elements that will not use in the gstreamer pipeline
-gstreamer excluded elements =
-
-; latency of RTP jitterbuffer
-rtp jitterbuffer latency = 100
-
-; SDP bundle policy (0:none, 1:balanced(not supported yet), 2:max compat(not supported yet), 3:max bundle)
-bundle policy = 3
-
-; default STUN server URL
-;stun server = stun://stun.l.google.com:19302
-
-
-[media source]
-; default values for video source pipeline (e.g, videotest, camera, screen)
-video raw format = I420
-video width = 320
-video height = 240
-video framerate = 30
-; comma separated list of default supported video codecs, the first one is default value.
-video codecs = vp8,vp9
-video hw encoder element =
-video encoded format support = no
-video drc support = no
-; default values for audio source pipeline (e.g, audiotest, mic)
-audio raw format = S16LE
-audio samplerate = 8000
-audio channels = 1
-; comma separated list of default supported audio codecs, the first one is default value.
-audio codecs = opus,pcmu,pcma
-audio hw encoder element =
-; default FEC setting of RTP packets
-use ulpfec red = no
-fec percentage = 100
-; default in-band FEC setting (only supported by opusenc/opusdec)
-use inbandfec = no
-packet loss percentage = 10
-
-
-[source videotest]
-source element = videotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1,pattern=18
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codecs =
-;video hw encoder element =
-;video encoded format support =
-video drc support = yes
-use ulpfec red = yes
-
-
-[source camera]
-source element = v4l2src
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codecs =
-;video hw encoder element =
-;video encoded format support =
-;video drc support =
-use ulpfec red = yes
-
-
-[source screen]
-source element = waylandsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;video raw format =
-;video width =
-;video height =
-;video framerate =
-;video codecs =
-;video hw encoder element =
-;video encoded format support =
-;video drc support =
-use ulpfec red = yes
-
-
-[source audiotest]
-source element = audiotestsrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties = is-live=1
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codecs =
-;audio hw encoder element =
-use inbandfec = yes
-
-
-[source mic]
-source element = pulsesrc
-; comma separated list of 'property-name=value' that will be set to the source element
-source element properties =
-; values below will override the default one of [media source] above
-;audio raw format =
-;audio samplerate =
-;audio channels =
-;audio codecs =
-;audio hw encoder element =
-use inbandfec = yes
-
-
-[source null]
-audio codecs = opus,pcmu,pcma
-video codecs = vp8,vp9,h264
-
-
-[rendering sink]
-audio sink element = pulsesink
-video sink element = tizenwlsink
-
-; comma separated list of elements, it should be one by one per codec type
-audio hw decoder elements =
-video hw decoder elements =
-
-evas native surface tbm format = I420
-
-
-[resource acquisition]
-camera = yes
-video encoder = no
-video decoder = no
-video overlay = no
-
-
-[vpxenc params]
-;threads =
-;end usage =
-;cpu used =
-;target bitrate =
-;keyframe max dist =
-;min quantizer =
-;max quantizer =
-;undershoot =
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_wfd_sink.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_wfd_sink.ini
deleted file mode 100644
index 9d78b2b..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mmfw_wfd_sink.ini
+++ /dev/null
@@ -1,231 +0,0 @@
-[general]
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=2,*wfd*:5)
-gstparam1 = --gst-debug=2,*wfd*:5,*wfdtsdemux:1,*wfdrtpbuffer:1
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; allowed timeout for changing pipeline state
-state change timeout = 5; sec
-
-; 0: default value set by wfdrtspsrc element, other: user define value.
-jitter buffer latency=10
-
-; for retransmission request enable = yes, disable = no
-enable retransmission = no
-
-; for reset basetime, enable = yes, disable = no
-enable reset basetime = yes
-
-; Maximum number of nanoseconds that a buffer can be late before it is dropped by videosink (-1 unlimited)
-video sink max lateness=20000000
-
-; nanoseconds to be added to buffertimestamp by sink elements
-sink ts offset=250000000
-
-; if no, go asynchronously to PAUSED without preroll
-audio sink async=no
-
-; if no, go asynchronously to PAUSED without preroll
-video sink async=no
-
-; user agent
-user agent =
-
-[debug]
-; generating dot file representing pipeline state
-; do export GST_DEBUG_DUMP_DOT_DIR=/tmp/ in the shell
-generate dot = no
-
-; set property to wfdsrc plugin for dumping rtsp message
-dump rtsp message = yes
-
-; enable tracing buffers using pad probe
-trace buffers = no
-
-; enable tracing first buffer
-trace first buffer = no
-
-; enable tracing buffers of wfdsrc
-trace buffers of wfdsrc = no
-
-; enable dumping ts data (eg. /var/tmp/*.ts)
-dump ts data = no
-
-; enable dumping rtp data (eg. /var/tmp/screenmirroring_sink_rtp.dump)
-dump rtp data = no
-
-
-[pipeline]
-wfdsrc element = wfdsrc
-
-tsdemux element = wfdtsdemux
-
-audio hdcp element =
-
-aac parser element = aacparse
-
-aac decoder element = avdec_aac
-
-ac3 parser element = ac3parse
-
-ac3 decoder element =
-
-lpcm converter element =
-
-lpcm filter element = capsfilter
-
-audio resampler element = audioconvert
-
-audio volume element =
-
-audio sinkbin queue element = ;queue
-
-audio sink element = pulsesink
-
-video hdcp element =
-
-video h264 parser element = h264parse
-
-video h265 parser element =
-
-video h264 decoder element = avdec_h264
-
-video h265 decoder element =
-
-video converter element =
-
-video filter element =
-
-video sink element = tizenwlsink
-
-video evas sink element = evaspixmapsink
-
-
-[wfd audio codecs]
-; 0x1: LPCM, 0x2: AAC, 0x4: AC3
-;default aac and LPCM
-audio codec=0x3
-
-audio latency=0x0
-
-;0x1 : 48000khz, 0x2: 44100khz
-audio sampling frequency=0x3
-
-; 0x1:2 channels, 0x2:4 channels, 0x4:6channels, 0x8:8channels
-audio channels=0x1
-
-
-[wfd video formats]
-; 0x0:not support, 0x1:H264
-video codec=0x1
-
-; 0x0:not supoort, 0x1: CHP, 0x2:CBP
-video profile=0x1
-
-video native resolution = 0x20
-
-video cea support=0x84ab;0x194ab
-
-video vesa support=0x1;0x5555555
-
-video hh support=0x555
-
-; 0x1:base, 0x2:high
-video profile=0x1
-
-; 0x1:level_3_1, 0x2:level_3_2, 0x4:level_4, 0x8:level_4_1, 0x10:level_4_2
-video level=0x2
-
-video latency=0x0
-
-video vertical resolution=720
-
-video horizontal resolution=1280
-
-video minimum slicesize=0
-
-video slice encoding params=200
-
-video framerate control support=11
-
-
-[wfd hdcp content protection]
-enable hdcp = no
-
-;0x0:none, 0x1:HDCP_2.0, 0x2:HDCP_2.1
-hdcp content protection=0x0
-
-hdcp port no=0
-
-
-[wfd2 video formats]
-;0x0:not support, 0x1:H264, 0x2:H265, 0x3:both
-video codec=0x3
-
-video native resolution = 0x20
-
-video non transcoding support=1
-
-[wfd2 h264 video format]
-video cea support=0x194ab
-
-video vesa support=0x5555555
-
-video hh support=0x555
-
-video profile=0x1
-
-video level=0x2
-
-video latency=0x0
-
-video vertical resolution=1080
-
-video horizontal resolution=1920
-
-video minimum slicesize=0
-
-video slice encoding params=200
-
-video framerate control support=0
-
-[wfd2 h265 video format]
-video cea support=394ab
-
-video vesa support=5555555
-
-video hh support=555
-
-; 0x1:WFD_H265_MAIN_PROFILE
-video profile=0x1
-
-; 0x1:WFD_H265_LEVEL_3_1
-video level=0x2
-
-video latency=0x0
-
-video vertical resolution=2360
-
-video horizontal resolution=3840
-
-video minimum slicesize=0
-
-video slice encoding params=200
-
-video framerate control support=0
-
-[wfd2 audio codecs]
-; 0x1: LPCM, 0x2: AAC, 0x4: AC3
-;default aac and LPCM
-audio codec=0x3
-
-;see mm_wfd_sink_wfd_enum.h
-audio lpcm mode=0x3
-
-audio aac mode=0x1
-
-audio ac3 mode=0x1
-
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/mused.conf b/media-config-target-rpi3-spk/hal/etc/multimedia/mused.conf
deleted file mode 100644
index 38e07b8..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/mused.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-[muse]
-; The 'hosts' parameter defines the modules,
-; which the user would like to connect to the muse.
-; If you want to add host, then write manually.
-hosts=player, camera, recorder
-logfile=/var/log/mused/muse-server
-lockfile=/tmp/.muse_core.lock
-min_timeout=5
-max_timeout=90
-;100MB=100000
-memory_threshold=100000
-enable_watch_external_storage=1
-
-; parameters for initializing gstreamer
-; DEFAULT SET (--gst-debug=*:2)
-gstparam1=--gst-debug=*:2
-gstparam2=--gst-disable-segtrap
-gstparam3=
-gstparam4=
-gstparam5=
-gstparam6=
-gstparam7=
-gstparam8=
-gstparam9=
-gstparam10=
-
-; gstparam#=--gst-plugin-load=/usr/lib/gstreamer-1.0/libgstcoreelements.so'
-; can be substituted with gstpreload=coreelements'
-gstpreload=
-
-[player]
-; The 'player' parameter represents the muse-player.
-; This module recovers the "capi-media-player".
-path=libmuse-player.so
-preloaded=no
-timeout=60
-disable_watchdog_api=-1
-;unlimited=-1
-max_instance=-1
-caution_instance=-1
-
-[camera]
-; The 'camera' parameter represents the muse-camera.
-; This module recovers the "capi-media-camera".
-path=libmuse-camera.so
-preloaded=no
-timeout=10
-;api 2 is camera_dispatcher_start_preview
-disable_watchdog_api=2
-;unlimited=-1
-max_instance=-1
-caution_instance=-1
-
-[recorder]
-; The 'recorder' parameter represents the muse-recorder.
-; This module recovers the "capi-media-recorder".
-; This one should be paired with the 'camera' module.
-path=libmuse-recorder.so
-preloaded=no
-timeout=10
-;api 5 is recorder_start
-disable_watchdog_api=5
-;unlimited=-1
-max_instance=-1
-caution_instance=-1
-
diff --git a/media-config-target-rpi3-spk/hal/etc/multimedia/scmirroring_src.ini b/media-config-target-rpi3-spk/hal/etc/multimedia/scmirroring_src.ini
deleted file mode 100644
index 68103c5..0000000
--- a/media-config-target-rpi3-spk/hal/etc/multimedia/scmirroring_src.ini
+++ /dev/null
@@ -1,114 +0,0 @@
-
-[general]
-
-; set default video source element
-; 0: ximagesrc, 1: xvimagesrc, 2: camerasrc, 3: videotestsrc, 4:waylandsrc
-videosrc element = 4
-
-; set default video encoder element
-video encoder element = omxh264enc
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-mtu_size value = 1400
-
-video converter element =
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-
-; set default audio encoder element
-audio encoder aac name = avenc_aac
-audio encoder ac3 name = avenc_ac3
-
-; set audio codec for source
-; according to GstWFDAudioFormat
-; 0x1: LPCM, 0x2: AAC, 0x4: AC3
-; default aac and LPCM
-audio codec = 0x3
-
-; set exynos audiosrc property
-; exynosaudio device name = alsa_output.0.analog-stereo.monitor
-exynosaudio device name = alsa_output.hw_0_0.monitor
-audio properties name = props,media.role=loopback-mirroring
-
-exynosaudio buffer_time = 200000
-; set qcmsm audiosrc property
-qcmsmaudio device name = hw:0,8
-qcmsmaudio buffer_time = 1000
-
-audio latency_time = 10000
-audio do_timestamp = 0
-
-; set video codec for source
-; according to GstWFDVideoFormat
-; 0x0: Not supportted, 0x1: H264
-; default H.264
-video codec = 0x1
-
-; Video Resolutions supported need to be filled in 32 bits according to WFD spec
-video resolution_supported = 0x00000001
-
-; Bitrate range for different resolutions
-; Resolution Set 1: default
-; Resolution Set 2: 1920 x 1080
-; Resolution Set 3: 1280 x 720
-; Resolution Set 4: 960 x 540
-; Resolution Set 5: 854 x 480
-; Resolution Set 6: 640 x 360
-; Resolution Set 7: 720 Remote Touch
-; UDP bitrate settings
-INIT_UDP_resolution_set_1 = 1048576
-MIN_UDP_resolution_set_1 = 838861
-MAX_UDP_resolution_set_1 = 1572864
-
-INIT_UDP_resolution_set_2 = 5242880
-MIN_UDP_resolution_set_2 = 3670016
-MAX_UDP_resolution_set_2 = 6291456
-
-INIT_UDP_resolution_set_3 = 2621440
-MIN_UDP_resolution_set_3 = 1572864
-MAX_UDP_resolution_set_3 = 3145728
-
-INIT_UDP_resolution_set_4 = 2621440
-MIN_UDP_resolution_set_4 = 1572864
-MAX_UDP_resolution_set_4 = 3145728
-
-INIT_UDP_resolution_set_5 = 838861
-MIN_UDP_resolution_set_5 = 314573
-MAX_UDP_resolution_set_5 = 1048576
-
-INIT_UDP_resolution_set_6 = 838861
-MIN_UDP_resolution_set_6 = 314573
-MAX_UDP_resolution_set_6 = 838861
-
-INIT_UDP_resolution_set_7 = 1572864
-MIN_UDP_resolution_set_7 = 838861
-MAX_UDP_resolution_set_7 = 1572864
-
-
-; Native resolution supported  CEA resolution=0, VESA resolution=1, HH resolution=2
-video native_resolution = 0
-
-; HDCP encryption
-encryption HDCP_enabled = 1
-
-; UIBC Capability
-uibc UIBC_GEN_capability = 15
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-;dumping ts stream to file
-dump ts = 0
-
diff --git a/media-config-target-rpi3-spk/hal/etc/murphy/murphy.lua b/media-config-target-rpi3-spk/hal/etc/murphy/murphy.lua
deleted file mode 100644
index 9675961..0000000
--- a/media-config-target-rpi3-spk/hal/etc/murphy/murphy.lua
+++ /dev/null
@@ -1,99 +0,0 @@
-m = murphy.get()
-
--- load the dlog plugin
-m:try_load_plugin('dlog')
-
--- load the console plugin
--- m:try_load_plugin('console')
-
--- load the dbus plugin
--- if m:plugin_exists('dbus') then
---    m:load_plugin('dbus')
--- end
-
--- load the native resource plugin
-if m:plugin_exists('resource-native') then
-    m:load_plugin('resource-native')
-    m:info("native resource plugin loaded")
-else
-    m:info("No native resource plugin found...")
-end
-
--- load the dbus resource plugin
-m:try_load_plugin('resource-dbus', {
-    dbus_bus = "system",
-    dbus_service = "org.Murphy",
-    dbus_track = true,
-    default_zone = "driver",
-    default_class = "implicit"
-})
-
--- load the domain control plugin
-if m:plugin_exists('domain-control') then
-    m:load_plugin('domain-control')
-else
-    m:info("No domain-control plugin found...")
-end
-
-if m:plugin_exists('glib') then
-    m:load_plugin('glib')
-else
-    m:info("No glib plugin found...")
-end
-
--- define application classes
-application_class {
-    name     = "interrupt",
-    priority = 99,
-    modal    = false,
-    share    = false,
-    order    = "fifo"
-}
-
-application_class {
-    name     = "media",
-    priority = 10,
-    modal    = false,
-    share    = false,
-    order    = "lifo"
-}
-
--- define zone attributes
-zone.attributes {
-    type = {mdb.string, "common", "rw"},
-    location = {mdb.string, "anywhere", "rw"}
-}
-
--- define zones
-zone {
-     name = "driver",
-     attributes = {
-         type = "common",
-         location = "front-left"
-     }
-}
-
--- define resource classes
-resource.class {
-     name = "video_overlay",
-     shareable = false,
-     sync_release = true
-}
-
-resource.class {
-     name = "video_decoder",
-     shareable = false,
-     sync_release = true
-}
-
-resource.class {
-     name = "video_encoder",
-     shareable = false,
-     sync_release = true
-}
-
-resource.class {
-     name = "camera",
-     shareable = false,
-     sync_release = true
-}
diff --git a/media-config-target-rpi3-spk/hal/etc/pulse/client.conf b/media-config-target-rpi3-spk/hal/etc/pulse/client.conf
deleted file mode 100644
index 3637b20..0000000
--- a/media-config-target-rpi3-spk/hal/etc/pulse/client.conf
+++ /dev/null
@@ -1,37 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values are commented out.  Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-default-server = /var/run/pulse/native
-; default-dbus-server =
-
-autospawn = no
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-enable-shm = no
-shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB
-
-; auto-connect-localhost = no
-; auto-connect-display = no
diff --git a/media-config-target-rpi3-spk/hal/etc/pulse/daemon.conf b/media-config-target-rpi3-spk/hal/etc/pulse/daemon.conf
deleted file mode 100644
index 431e66b..0000000
--- a/media-config-target-rpi3-spk/hal/etc/pulse/daemon.conf
+++ /dev/null
@@ -1,83 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values are commented out.  Use either ; or # for
-## commenting.
-
-daemonize = yes
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-system-instance = yes
-; local-server-type = user
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-realtime-scheduling = yes
-realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file = /etc/pulse/default.pa
-
-log-target = dlog
-log-level = info
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = speex-fixed-3
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-flat-volumes = no
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-alternate-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
diff --git a/media-config-target-rpi3-spk/hal/etc/pulse/default.pa b/media-config-target-rpi3-spk/hal/etc/pulse/default.pa
deleted file mode 100644
index ef8f114..0000000
--- a/media-config-target-rpi3-spk/hal/etc/pulse/default.pa
+++ /dev/null
@@ -1,149 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
-.nofail
-load-module module-jackdbus-detect channels=2
-.fail
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music/video streams when a phone stream is active
-load-module module-role-cork
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-### Load DBus protocol
-.ifexists module-dbus-protocol.so
-load-module module-dbus-protocol
-.endif
-
-
-load-module module-switch-on-port-available
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
diff --git a/media-config-target-rpi3-spk/hal/etc/pulse/device-map.json b/media-config-target-rpi3-spk/hal/etc/pulse/device-map.json
deleted file mode 100644
index 00aa8ae..0000000
--- a/media-config-target-rpi3-spk/hal/etc/pulse/device-map.json
+++ /dev/null
@@ -1,26 +0,0 @@
-{
-	"device-types":[
-		{
-			"device-type":"builtin-speaker",
-			"playback-devices":{"normal":"tizen2:ALSA,0"}
-		},
-		{
-			"device-type":"builtin-mic",
-			"capture-devices":{"normal":"tizen2:seeed4micvoicec,0"}
-		}
-	],
-	"device-files":{
-		"playback-devices":[
-			{
-				"device-string":"tizen2:ALSA,0",
-				"role":{"normal":"rate=48000 channels=2 fragment_size=1920 fragments=4"}
-			},
-		],
-		"capture-devices":[
-			{
-				"device-string":"tizen2:seeed4micvoicec,0",
-				"role":{"normal":"rate=48000 channels=4 format=s32le fragment_size=7680 fragments=4"}
-			}
-		]
-	}
-}
diff --git a/media-config-target-rpi3-spk/hal/etc/pulse/stream-map.json b/media-config-target-rpi3-spk/hal/etc/pulse/stream-map.json
deleted file mode 100644
index 6164987..0000000
--- a/media-config-target-rpi3-spk/hal/etc/pulse/stream-map.json
+++ /dev/null
@@ -1,209 +0,0 @@
-{
-	"latencies":[
-		{
-			"type":"low",
-			"fragsize-ms":25,
-			"minreq-ms":-1,
-			"tlength-ms":100,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"mid",
-			"fragsize-ms":50,
-			"minreq-ms":-1,
-			"tlength-ms":200,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"high",
-			"fragsize-ms":75,
-			"minreq-ms":-1,
-			"tlength-ms":400,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"voip",
-			"fragsize-ms":20,
-			"minreq-ms":20,
-			"tlength-ms":100,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-		{
-			"type":"default",
-			"fragsize-ms":50,
-			"minreq-ms":-1,
-			"tlength-ms":200,
-			"prebuf-ms":-1,
-			"maxlength":-1
-		},
-		{
-			"type":"default-async",
-			"fragsize-ms":50,
-			"minreq-ms":20,
-			"tlength-ms":200,
-			"prebuf-ms":0,
-			"maxlength":-1
-		},
-	],
-	"volumes":[
-		{
-			"type":"master",
-			"is-hal-volume":1
-		},
-		{
-			"type":"media",
-			"is-hal-volume":0
-		},
-		{
-			"type":"system",
-			"is-hal-volume":0
-		},
-		{
-			"type":"alarm",
-			"is-hal-volume":0
-		},
-		{
-			"type":"notification",
-			"is-hal-volume":0
-		},
-		{
-			"type":"voice",
-			"is-hal-volume":0
-		},
-		{
-			"type":"ringtone",
-			"is-hal-volume":0
-		},
-		{
-			"type":"voip",
-			"is-hal-volume":0
-		},
-		{
-			"type":"call",
-			"is-hal-volume":1
-		}
-	],
-	"streams":[
-		{
-			"role":"media",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"media"},
-			"avail-in-devices":["usb-audio","builtin-mic"],
-			"avail-out-devices":["network","bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"]
-		},
-		{
-			"role":"system",
-			"priority" : 2,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"system"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"alarm",
-			"priority" : 4,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"alarm"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["builtin-speaker","bt-a2dp","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"notification",
-			"priority" : 4,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"notification"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["builtin-speaker","bt-a2dp","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"emergency",
-			"priority" : 4,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"voice-information",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"voice"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"voice-recognition",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["usb-audio","builtin-mic","webrtc"],
-			"avail-out-devices":["none"],
-			"avail-frameworks":["audio-io"]
-		},
-		{
-			"role":"voice-recognition-service",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"none"},
-			"avail-in-devices":["usb-audio","builtin-mic"],
-			"avail-out-devices":["none"],
-			"avail-frameworks":["audio-io"]
-		},
-		{
-			"role":"ringtone-voip",
-			"priority" : 5,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"ringtone"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io","sound-manager"]
-		},
-		{
-			"role":"ringtone-call",
-			"priority" : 6,
-			"route-type" : "auto-all",
-			"volume-types":{"in":"none","out":"ringtone"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io"]
-		},
-		{
-			"role":"voip",
-			"priority" : 5,
-			"route-type" : "manual",
-			"volume-types":{"in":"none","out":"voip"},
-			"avail-in-devices":["usb-audio","builtin-mic"],
-			"avail-out-devices":["builtin-speaker","usb-audio"],
-			"avail-frameworks":["audio-io","tone-player","sound-manager","webrtc"]
-		},
-		{
-			"role":"ext-media",
-			"priority" : 3,
-			"route-type" : "manual-ext",
-			"volume-types":{"in":"none","out":"media"},
-			"avail-in-devices":["usb-audio"],
-			"avail-out-devices":["bt-a2dp","usb-audio"],
-			"avail-frameworks":["player","wav-player","tone-player","audio-io","recorder","webrtc"]
-		},
-		{
-			"role":"network-source-media",
-			"priority" : 3,
-			"route-type" : "auto",
-			"volume-types":{"in":"none","out":"media"},
-			"avail-in-devices":["none"],
-			"avail-out-devices":["bt-a2dp","usb-audio","builtin-speaker"],
-			"avail-frameworks":["audio-io"]
-		}
-	]
-}
diff --git a/media-config-target-rpi3-spk/hal/etc/pulse/system.pa b/media-config-target-rpi3-spk/hal/etc/pulse/system.pa
deleted file mode 100644
index 911646f..0000000
--- a/media-config-target-rpi3-spk/hal/etc/pulse/system.pa
+++ /dev/null
@@ -1,75 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-### Load several protocols
-load-module module-native-protocol-unix auth-anonymous=1
-
-### Load module-tizenaudio-policy
-load-module module-tizenaudio-policy
-load-module module-tizenaudio-echo-cancel
-
-#.ifexists module-udev-detect.so
-load-module module-udev-detect
-#.endif
-
-### Sound Player module
-load-module module-sound-player
-load-module module-tone-player
-load-module module-role-ducking global=1 trigger_roles=solo/notification,voice-information ducking_roles=media,system,alarm,notification,voice-information,ext-media,network-source-media/media,ext-media,network-source-media volume=0%/25% fade_in=0/1000 fade_out=0/1000 skip_sinks=ACM_Sink
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-
-### Automatically restore the volume of streams and devices
-#load-module module-stream-restore
-#load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-.ifexists module-dbus-protocol.so
-### If you want to allow TCP connections, set access to "remote" or "local,remote".
-load-module module-dbus-protocol access=local
-.endif
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-#load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle timeout=1
-
-load-sample-lazy camera-shutter-01 /usr/share/sounds/mm-camcorder/capture_shutter_01.ogg
-load-sample-lazy camera-shutter-02 /usr/share/sounds/mm-camcorder/capture_shutter_02.ogg
-load-sample-lazy recording-start /usr/share/sounds/mm-camcorder/recording_start_01.ogg
-load-sample-lazy recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.ogg
diff --git a/media-config-target-rpi3-spk/hal/etc/xdg/gstomx.conf b/media-config-target-rpi3-spk/hal/etc/xdg/gstomx.conf
deleted file mode 100644
index 7a92953..0000000
--- a/media-config-target-rpi3-spk/hal/etc/xdg/gstomx.conf
+++ /dev/null
@@ -1,84 +0,0 @@
-[omxmpeg2videodec]
-type-name=GstOMXMPEG2VideoDec
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_decode
-rank=257
-in-port-index=130
-out-port-index=131
-hacks=no-component-role
-
-[omxmpeg4videodec]
-type-name=GstOMXMPEG4VideoDec
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_decode
-rank=257
-in-port-index=130
-out-port-index=131
-hacks=no-component-role
-
-[omxh263dec]
-type-name=GstOMXH263Dec
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_decode
-rank=257
-in-port-index=130
-out-port-index=131
-hacks=no-component-role
-
-[omxh264dec]
-type-name=GstOMXH264Dec
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_decode
-rank=257
-in-port-index=130
-out-port-index=131
-hacks=no-component-role
-
-[omxmjpegdec]
-type-name=GstOMXMJPEGDec
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_decode
-rank=257
-in-port-index=130
-out-port-index=131
-hacks=no-component-role
-
-[omxvc1dec]
-type-name=GstOMXWMVDec
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_decode
-rank=257
-in-port-index=130
-out-port-index=131
-hacks=no-component-role
-sink-template-caps=video/x-wmv,wmvversion=(int)3,format=(string){WMV3,WVC1},width=(int)[1,MAX],height=(int)[1,MAX]
-
-[omxh264enc]
-type-name=GstOMXH264Enc
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.video_encode
-rank=257
-in-port-index=200
-out-port-index=201
-hacks=no-component-role
-
-[omxanalogaudiosink]
-type-name=GstOMXAnalogAudioSink
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.audio_render
-rank=257
-in-port-index=100
-out-port-index=101
-hacks=no-component-role
-sink-template-caps=audio/x-raw,format=(string){S16LE,S32LE},layout=(string)interleaved,rate=(int){8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000},channels=(int)[1,2]
-
-[omxhdmiaudiosink]
-type-name=GstOMXHdmiAudioSink
-core-name=/opt/vc/lib/libopenmaxil.so
-component-name=OMX.broadcom.audio_render
-rank=258
-in-port-index=100
-out-port-index=101
-hacks=no-component-role
-sink-template-caps=audio/x-raw,format=(string){S16LE,S32LE},layout=(string)interleaved,rate=(int){8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000},channels=(int)[1,8];audio/x-ac3,framed=(boolean)true;audio/x-dts,framed=(boolean)true,block-size=(int){512,1024,2048}
-
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf
deleted file mode 100644
index 47e22c5..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where an 'Aux' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 80
-description-key = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
deleted file mode 100644
index 96861e7..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf
+++ /dev/null
@@ -1,104 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Dock Mic' or 'Dock Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 78
-description-key = analog-input-microphone-dock
-
-[Jack Dock Mic]
-required-any = any
-
-[Jack Dock Mic Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Dock Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Dock Mic Boost:on]
-name = input-boost-on
-
-[Option Dock Mic Boost:off]
-name = input-boost-off
-
-[Element Dock Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Dock Mic]
-name = analog-input-microphone-dock
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Dock Mic]
-name = analog-input-microphone-dock
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf
deleted file mode 100644
index d3501a8..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where an 'FM' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-description-key = analog-input-radio
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-.include analog-input.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
deleted file mode 100644
index 6e7775c..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf
+++ /dev/null
@@ -1,104 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Front Mic' or 'Front Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 85
-description-key = analog-input-microphone-front
-
-[Jack Front Mic]
-required-any = any
-
-[Jack Front Mic Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Front Mic Boost:on]
-name = input-boost-on
-
-[Option Front Mic Boost:off]
-name = input-boost-off
-
-[Element Front Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Front Mic]
-name = analog-input-microphone-front
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Front Mic]
-name = analog-input-microphone-front
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
deleted file mode 100644
index eb5740a..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf
+++ /dev/null
@@ -1,102 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For some ASUS netbooks that have one jack that can be either a Headphone
-; *or* a mic. This path will be active only when it is used as a mic.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 87
-description-key = analog-input-microphone
-
-[Jack Headphone Mic]
-required-any = any
-state.plugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Headphone Mic]
-name = analog-input-microphone
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Headphone Mic]
-name = analog-input-microphone
-required-any = any
-
-; Make sure the internal speakers are not auto-muted when you plug a mic in
-[Element Auto-Mute Mode]
-enumeration = select
-
-[Option Auto-Mute Mode:Disabled]
-name = analog-input-microphone
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
deleted file mode 100644
index 579db6b..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf
+++ /dev/null
@@ -1,114 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Headset Mic' or 'Headset Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 88
-description-key = analog-input-microphone-headset
-
-[Jack Headset Mic]
-required-any = any
-
-[Jack Headset Mic Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Headphone]
-state.plugged = unknown
-
-[Jack Front Headphone]
-state.plugged = unknown
-
-[Jack Headphone Mic]
-state.plugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headset Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headset Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headset]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Headset Mic]
-name = Headset Microphone
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Headset Mic]
-name = Headset Microphone
-required-any = any
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf
deleted file mode 100644
index 9e22008..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic-always.conf
+++ /dev/null
@@ -1,133 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists
-; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-description-key = analog-input-microphone-internal
-
-[Jack Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Internal Mic Boost]
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Internal Mic Boost:on]
-name = input-boost-on
-
-[Option Internal Mic Boost:off]
-name = input-boost-off
-
-[Element Int Mic Boost]
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Int Mic Boost:on]
-name = input-boost-on
-
-[Option Int Mic Boost:off]
-name = input-boost-off
-
-[Element Internal Mic]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Int Mic]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Internal Mic]
-name = analog-input-microphone-internal
-
-[Option Input Source:Int Mic]
-name = analog-input-microphone-internal
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Internal Mic]
-name = analog-input-microphone-internal
-
-[Option Capture Source:Int Mic]
-name = analog-input-microphone-internal
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
deleted file mode 100644
index 898410a..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf
+++ /dev/null
@@ -1,154 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Internal Mic' or 'Internal Mic Boost' element exists
-; 'Int Mic' and 'Int Mic Boost' are for compatibility with kernels < 2.6.38
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-description-key = analog-input-microphone-internal
-
-[Jack Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Mic]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Internal Mic Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Internal Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Internal Mic Boost:on]
-name = input-boost-on
-
-[Option Internal Mic Boost:off]
-name = input-boost-off
-
-[Element Int Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Int Mic Boost:on]
-name = input-boost-on
-
-[Option Int Mic Boost:off]
-name = input-boost-off
-
-[Element Internal Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Int Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Internal Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Option Input Source:Int Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Internal Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Option Capture Source:Int Mic]
-name = analog-input-microphone-internal
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Headphone Mic]
-switch = off
-volume = off
-
-[Element Headphone Mic Boost]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf
deleted file mode 100644
index cf20790..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf
+++ /dev/null
@@ -1,144 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 81
-
-[Jack Line]
-required-any = any
-
-[Jack Line Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Line - Input]
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line Boost]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Line]
-name = analog-input-linein
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Line]
-name = analog-input-linein
-required-any = any
-
-[Element PCM Capture Source]
-enumeration = select
-
-[Option PCM Capture Source:Line]
-name = analog-input-linein
-required-any = any
-
-[Option PCM Capture Source:Line In]
-name = analog-input-linein
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Line In]
-priority = 19
-name = input-linein
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
deleted file mode 100644
index 7147d20..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Mic/Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 85
-description-key = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf
deleted file mode 100644
index 53c03c8..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf
+++ /dev/null
@@ -1,141 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Mic' or 'Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 87
-description-key = analog-input-microphone
-
-[Jack Mic]
-required-any = any
-
-[Jack Mic Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Mic - Input]
-required-any = any
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Mic Boost:on]
-name = input-boost-on
-
-[Option Mic Boost:off]
-name = input-boost-off
-
-[Element Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Mic]
-name = analog-input-microphone
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Mic]
-name = analog-input-microphone
-required-any = any
-
-[Element PCM Capture Source]
-enumeration = select
-
-[Option PCM Capture Source:Mic]
-name = analog-input-microphone
-required-any = any
-
-[Option PCM Capture Source:Mic-In/Mic Array]
-name = analog-input-microphone
-required-any = any
-
-;;; Some AC'97s have "Mic Select" and "Mic Boost (+20dB)"
-
-[Element Mic Select]
-enumeration = select
-
-[Option Mic Select:Mic1]
-name = input-microphone
-priority = 20
-
-[Option Mic Select:Mic2]
-name = input-microphone
-priority = 19
-
-[Element Mic Boost (+20dB)]
-switch = select
-volume = merge
-
-[Option Mic Boost (+20dB):on]
-name = input-boost-on
-
-[Option Mic Boost (+20dB):off]
-name = input-boost-off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Rear Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-[Element Rear Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common
deleted file mode 100644
index e5ced21..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common
+++ /dev/null
@@ -1,60 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Common element for all microphone inputs
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[Properties]
-device.icon_name = audio-input-microphone
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Line Boost]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-[Element Inverted Internal Mic]
-switch = off
-volume = off
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-priority = 19
-name = input-microphone
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
deleted file mode 100644
index 7136193..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf
+++ /dev/null
@@ -1,104 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Rear Mic' or 'Rear Mic Boost' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 82
-description-key = analog-input-microphone-rear
-
-[Jack Rear Mic]
-required-any = any
-
-[Jack Rear Mic Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Rear Mic Boost]
-required-any = any
-switch = select
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Option Rear Mic Boost:on]
-name = input-boost-on
-
-[Option Rear Mic Boost:off]
-name = input-boost-off
-
-[Element Rear Mic]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Rear Mic]
-name = analog-input-microphone-rear
-required-any = any
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:Rear Mic]
-name = analog-input-microphone-rear
-required-any = any
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Front Mic]
-switch = off
-volume = off
-
-[Element Dock Mic]
-switch = off
-volume = off
-
-[Element Mic Boost]
-switch = off
-volume = off
-
-[Element Dock Mic Boost]
-switch = off
-volume = off
-
-[Element Internal Mic Boost]
-switch = off
-volume = off
-
-[Element Front Mic Boost]
-switch = off
-volume = off
-
-.include analog-input-mic.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
deleted file mode 100644
index 99d1d79..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'TV Tuner' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-description-key = analog-input-video
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf
deleted file mode 100644
index 50c999e..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; For devices where a 'Video' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Internal Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf
deleted file mode 100644
index c9db677..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf
+++ /dev/null
@@ -1,102 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; A fallback for devices that lack separate Mic/Line/Aux/Video/TV
-; Tuner/FM elements
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required-absent = any
-
-[Element Mic Boost]
-required-absent = any
-
-[Element Dock Mic]
-required-absent = any
-
-[Element Dock Mic Boost]
-required-absent = any
-
-[Element Front Mic]
-required-absent = any
-
-[Element Front Mic Boost]
-required-absent = any
-
-[Element Int Mic]
-required-absent = any
-
-[Element Int Mic Boost]
-required-absent = any
-
-[Element Internal Mic]
-required-absent = any
-
-[Element Internal Mic Boost]
-required-absent = any
-
-[Element Rear Mic]
-required-absent = any
-
-[Element Rear Mic Boost]
-required-absent = any
-
-[Element Headset]
-required-absent = any
-
-[Element Headset Mic]
-required-absent = any
-
-[Element Headset Mic Boost]
-required-absent = any
-
-[Element Headphone Mic]
-required-absent = any
-
-[Element Headphone Mic Boost]
-required-absent = any
-
-[Element Line]
-required-absent = any
-
-[Element Line Boost]
-required-absent = any
-
-[Element Aux]
-required-absent = any
-
-[Element Video]
-required-absent = any
-
-[Element Mic/Line]
-required-absent = any
-
-[Element TV Tuner]
-required-absent = any
-
-[Element FM]
-required-absent = any
-
-.include analog-input.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common
deleted file mode 100644
index 201087e..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common
+++ /dev/null
@@ -1,289 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Mixer path for PulseAudio's ALSA backend, common elements for all
-; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distinguish them, in the same
-; order they appear here.
-;
-; Source selection should use the following names:
-;
-;       input                       -- If we don't know the exact kind of input
-;       input-microphone
-;       input-microphone-internal
-;       input-microphone-external
-;       input-linein
-;       input-video
-;       input-radio
-;       input-docking-microphone
-;       input-docking-linein
-;       input-docking
-;
-;  We explicitly don't want to wrap the following sources:
-;
-;       CD
-;       Synth/MIDI
-;       Phone
-;       Mix
-;       Digital/SPDIF
-;       Master
-;       PC Speaker
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Input Source Select'
-
-[Element Input Source Select]
-enumeration = select
-
-[Option Input Source Select:Input1]
-name = input
-priority = 10
-
-[Option Input Source Select:Input2]
-name = input
-priority = 5
-
-;;; 'Input Source'
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Digital Mic]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Microphone]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Front Microphone]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Internal Mic 1]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Line-In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Docking-Station]
-name = input-docking
-priority = 17
-
-[Option Input Source:AUX IN]
-name = input
-priority = 10
-
-;;; 'Capture Source'
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:TV Tuner]
-name = input-video
-
-[Option Capture Source:FM]
-name = input-radio
-
-[Option Capture Source:Mic/Line]
-name = input
-
-[Option Capture Source:Line/Mic]
-name = input
-
-[Option Capture Source:Microphone]
-name = input-microphone
-
-[Option Capture Source:Int DMic]
-name = input-microphone-internal
-
-[Option Capture Source:iMic]
-name = input-microphone-internal
-
-[Option Capture Source:i-Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Microphone]
-name = input-microphone-internal
-
-[Option Capture Source:Front Microphone]
-name = input-microphone
-
-[Option Capture Source:Mic1]
-name = input-microphone
-
-[Option Capture Source:Mic2]
-name = input-microphone
-
-[Option Capture Source:D-Mic]
-name = input-microphone
-
-[Option Capture Source:IntMic]
-name = input-microphone-internal
-
-[Option Capture Source:ExtMic]
-name = input-microphone-external
-
-[Option Capture Source:Ext Mic]
-name = input-microphone-external
-
-[Option Capture Source:E-Mic]
-name = input-microphone-external
-
-[Option Capture Source:e-Mic]
-name = input-microphone-external
-
-[Option Capture Source:LineIn]
-name = input-linein
-
-[Option Capture Source:Analog]
-name = input
-
-[Option Capture Source:Line-In]
-name = input-linein
-
-[Option Capture Source:Line In]
-name = input-linein
-
-[Option Capture Source:Video]
-name = input-video
-
-[Option Capture Source:Aux]
-name = input
-
-[Option Capture Source:Aux0]
-name = input
-
-[Option Capture Source:Aux1]
-name = input
-
-[Option Capture Source:Aux2]
-name = input
-
-[Option Capture Source:Aux3]
-name = input
-
-[Option Capture Source:AUX IN]
-name = input
-
-[Option Capture Source:Aux In]
-name = input
-
-[Option Capture Source:AOUT]
-name = input
-
-[Option Capture Source:AUX]
-name = input
-
-[Option Capture Source:Cam Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 1]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 2]
-name = input-microphone
-
-[Option Capture Source:Analog Inputs]
-name = input
-
-[Option Capture Source:Unknown1]
-name = input
-
-[Option Capture Source:Unknown2]
-name = input
-
-[Option Capture Source:Docking-Station]
-name = input-docking
-
-;;; 'Mic Jack Mode'
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-name = input-microphone
-
-[Option Mic Jack Mode:Line In]
-name = input-linein
-
-;;; 'Digital Input Source'
-
-[Element Digital Input Source]
-enumeration = select
-
-[Option Digital Input Source:Digital Mic 1]
-name = input-microphone
-
-[Option Digital Input Source:Analog Inputs]
-name = input
-
-[Option Digital Input Source:Digital Mic 2]
-name = input-microphone
-
-;;; 'Analog Source'
-
-[Element Analog Source]
-enumeration = select
-
-[Option Analog Source:Mic]
-name = input-microphone
-
-[Option Analog Source:Line in]
-name = input-linein
-
-[Option Analog Source:Aux]
-name = input
-
-;;; 'Shared Mic/Line in'
-
-[Element Shared Mic/Line in]
-enumeration = select
-
-[Option Shared Mic/Line in:Mic in]
-name = input-microphone
-
-[Option Shared Mic/Line in:Line in]
-name = input-linein
-
-;;; Various Boosts
-
-[Element Capture Boost]
-switch = select
-
-[Option Capture Boost:on]
-name = input-boost-on
-
-[Option Capture Boost:off]
-name = input-boost-off
-
-[Element Auto Gain Control]
-switch = select
-
-[Option Auto Gain Control:on]
-name = input-agc-on
-
-[Option Auto Gain Control:off]
-name = input-agc-off
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf
deleted file mode 100644
index 360a1fc..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-chat.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-; Some gaming devices have a separate "chat" device, this is for voice chat
-; while playing games. This device is just a fairly standard analog mono
-; device, but it's nicer to make it clear that this is the "chat" device
-; as is mentioned in the marketing info and manual.
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
deleted file mode 100644
index bda137d..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf
+++ /dev/null
@@ -1,118 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for the second headphone output on dual-headphone machines.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 98
-
-[Properties]
-device.icon_name = audio-headphones
-
-; HP EliteDesk 800 SFF Headphone
-[Jack Front Headphone,1]
-required-any = any
-
-; HP EliteDesk 800 DM Headphone
-[Jack Front Headphone Surround]
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the second headphones, not
-; the first headphones. But it should not hurt if we leave the
-; headphone jack enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone,1]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone+LO]
-switch = mute
-volume = zero
-
-[Element Speaker+LO]
-switch = off
-volume = off
-
-[Element Headphone2]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-; On some machines, the Front Volume Control is shared by Headphone and Lineout,
-; or Headphone and Speaker, but they have independent Volume Switch. Here only
-; use switch to mute Lineout or Speaker.
-[Element Front]
-switch = off
-volume = zero
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-[Element Bass Speaker]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
deleted file mode 100644
index 3c62c5e..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf
+++ /dev/null
@@ -1,180 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for mixers that have a 'Headphone' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-description-key = analog-output-headphones
-
-[Properties]
-device.icon_name = audio-headphones
-
-[Jack Dock Headphone]
-required-any = any
-
-[Jack Dock Headphone Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Front Headphone]
-required-any = any
-
-; HP EliteDesk 800 DM Headset
-[Jack Front Headphone Front]
-required-any = any
-
-[Jack Front Headphone Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Headphone]
-required-any = any
-
-[Jack Headphone Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-# This jack can be either a headphone *or* a mic. Used on some ASUS netbooks.
-[Jack Headphone Mic]
-required-any = any
-
-[Jack Headphone - Output]
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Speaker+LO]
-switch = off
-volume = off
-
-[Element Headphone+LO]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Headphone]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone,1]
-switch = mute
-volume = zero
-
-[Element Headset]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line HP Swap]
-switch = on
-required-any = any
-
-; This profile path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-; On some machines, the Front Volume Control is shared by Headphone and Lineout,
-; or Headphone and Speaker, but they have independent Volume Switch. Here only
-; use switch to mute Lineout or Speaker.
-[Element Front]
-switch = off
-volume = zero
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-[Element Bass Speaker]
-switch = off
-volume = off
-
-[Element Speaker Front]
-switch = off
-volume = off
-
-[Element Speaker Surround]
-switch = off
-volume = off
-
-[Element Speaker Side]
-switch = off
-volume = off
-
-[Element Speaker CLFE]
-switch = off
-volume = off
-
-[Element Speaker Center/LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
deleted file mode 100644
index 1ffce22..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf
+++ /dev/null
@@ -1,214 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-[General]
-priority = 90
-description-key = analog-output-lineout
-
-[Jack Line Out]
-required-any = any
-
-[Jack Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Front Line Out]
-required-any = any
-
-[Jack Front Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Rear Line Out]
-required-any = any
-
-[Jack Rear Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Front]
-required-any = any
-
-[Jack Line Out Front Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out CLFE]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out CLFE Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Surround]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Surround Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Side]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Line Out Side Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Jack Dock Line Out]
-required-any = any
-
-[Jack Dock Line Out Phantom]
-state.plugged = unknown
-state.unplugged = unknown
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-required-any = any
-
-[Element Headphone+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-required-any = any
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Line HP Swap]
-switch = off
-required-any = any
-
-; This profile path is intended to control line out, let's mute headphones
-; else there will be a spike when plugging in headphones
-[Element Headphone]
-switch = off
-volume = off
-
-[Element Headphone,1]
-switch = off
-volume = off
-
-[Element Headphone2]
-switch = off
-volume = off
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Bass Speaker]
-switch = off
-volume = off
-
-[Element Speaker Front]
-switch = off
-volume = off
-
-[Element Speaker Surround]
-switch = off
-volume = off
-
-[Element Speaker Side]
-switch = off
-volume = off
-
-[Element Speaker CLFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf
deleted file mode 100644
index 5e49405..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-mono.conf
+++ /dev/null
@@ -1,99 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Intended for usage on boards that have a separate Mono output plug.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 50
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = off
-volume = off
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone,1]
-switch = mute
-volume = zero
-
-[Element Headphone+LO]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Desktop Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf
deleted file mode 100644
index 756afa9..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker-always.conf
+++ /dev/null
@@ -1,187 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for mixers that don't have a 'Speaker' control, but where we
-; force enable the speaker paths nonetheless.
-; Needed for some older Dell laptops.
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-description-key = analog-output-speaker
-
-[Properties]
-device.icon_name = audio-speakers
-
-[Jack Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out Front]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone,1]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Headphone+LO]
-switch = off
-volume = off
-
-[Element Speaker+LO]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Desktop Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Front Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element Center Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element LFE Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element Bass Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
deleted file mode 100644
index 72f928f..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf
+++ /dev/null
@@ -1,246 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Path for mixers that have a 'Speaker' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-description-key = analog-output-speaker
-
-[Properties]
-device.icon_name = audio-speakers
-
-[Jack Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Headphone]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Line Out Front]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Front Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Rear Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Dock Line Out]
-state.plugged = no
-state.unplugged = unknown
-
-[Jack Speaker]
-required-any = any
-
-[Jack Speaker Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Speaker Front Phantom]
-required-any = any
-state.plugged = unknown
-state.unplugged = unknown
-
-[Jack Speaker - Output]
-required-any = any
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; Make sure the internal speakers are not auto-muted once the system has speakers
-[Element Auto-Mute Mode]
-enumeration = select
-
-[Option Auto-Mute Mode:Disabled]
-name = analog-output-speaker
-
-; This profile path is intended to control the speaker, let's mute headphones
-; else there will be a spike when plugging in headphones
-[Element Headphone]
-switch = off
-volume = off
-
-[Element Headphone,1]
-switch = off
-volume = off
-
-[Element Headphone2]
-switch = off
-volume = off
-
-[Element Headphone+LO]
-switch = off
-volume = off
-
-[Element Speaker+LO]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Desktop Speaker]
-required-any = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Front Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-required-any = any
-
-[Element Speaker Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-required-any = any
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-required-any = any
-
-[Element Speaker Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-required-any = any
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Speaker Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element Center Speaker]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-required-any = any
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element LFE Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-required-any = any
-
-[Element Bass Speaker]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-required-any = any
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Speaker CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf
deleted file mode 100644
index 0f6b5f5..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf
+++ /dev/null
@@ -1,88 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Intended for the 'default' output. Note that a-o-speaker.conf has a
-; higher priority than this
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-[Element CLFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-[Element Center/LFE]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,lfe
-
-.include analog-output.conf.common
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
deleted file mode 100644
index 31d4b44..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
+++ /dev/null
@@ -1,186 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Common part of all paths
-
-; So here's generally how mixer paths are used by PA: PA goes through
-; a mixer path file from top to bottom and checks if a mixer element
-; described therein exists. If so it is added to the list of mixer
-; elements PA will control, keeping the order it read them in. If a
-; mixer element described here has set the required= or
-; required-absent= directives a path might not be accepted as valid
-; and is ignored in its entirety (see below). However usually if a
-; element listed here is missing this one element is ignored but not
-; the entire path.
-;
-; When a device shall be muted/unmuted *all* elements listed in a path
-; file with "switch = mute" will be toggled.
-;
-; When a device shall change its volume, PA will got through the list
-; of all elements with "volume = merge" and set the volume on the
-; first element. If that element does not support dB volumes, this is
-; where the story ends. If it does support dB volumes, PA divides the
-; requested volume by the volume that was set on this element, and
-; then go on to the next element with "volume = merge" and then set
-; that there, and so on.  That way the first volume element in the
-; path will be the one that does the 'biggest' part of the overall
-; volume adjustment, with the remaining elements usually being set to
-; some value next to 0dB. This logic makes sure we get the full range
-; over all volume sliders and a very high granularity of volumes
-; already in hardware.
-;
-; All switches and enumerations set to "select" are exposed via the
-; "port" functionality of sinks/sources. Basically every possible
-; switch setting and every possible enumeration setting will be
-; combined and made into a "port". So make sure you don't list too
-; many switches/enums for exposing, because the number of ports might
-; rise exponentially.
-;
-; Only one path can be selected at a time. All paths that are valid
-; for an audio device will be exposed as "port" for the sink/source.
-
-
-; [General]
-; type = ...                             # The device type. It's highly recommended to set a type for every path.
-;                                        # See parse_type() in alsa-mixer.c for supported values.
-; priority = ...                         # Priority for this path
-; description-key = ...                  # The path description is looked up from a table in path_verify() in
-;                                        # src/modules/alsa/alsa-mixer.c. By default the path name (i.e. the file name
-;                                        # minus the ".conf" suffix) is used as the lookup key, but if this option is
-;                                        # set, then the given string is used as the key instead. In any case the
-;                                        # "description" option can be used to override the path description.
-; description = ...                      # Description for this path. Overrides the normal description lookup logic, as
-;                                        # described in the "description-key" documentation above.
-; mute-during-activation = yes | no      # If this path supports hardware mute, should the hw mute be used while activating this
-;                                        # path? In some cases this can reduce extra noises during port switching, while in other
-;                                        # cases this can increase such noises. Default: no.
-; eld-device = ...                       # If this is an HDMI port, set to "auto" so that PulseAudio will try to read
-;                                        # the monitor ELD information from the ALSA mixer. By default the ELD information
-;                                        # is not read, because it's only applicable with HDMI. Earlier the "auto" option
-;                                        # didn't exist, and the hw device index had to be manually configured. For
-;                                        # backwards compatibility, it's still possible to manually configure the device
-;                                        # index using this option.
-;
-; [Properties]                           # Property list for this path. The list is merged into the port property list.
-; <key> = <value>                        # Each property is defined on its own line.
-; ...
-;
-; [Option ...:...]                       # For each option of an enumeration or switch element
-;                                        # that shall be exposed as a sink/source port. Needs to
-;                                        # be named after the Element, followed by a colon, followed
-;                                        # by the option name, resp. on/off if the element is a switch.
-; name = ...                             # Logical name to use in the path identifier
-; priority = ...                         # Priority if this is made into a device port
-; required = ignore | enumeration | any            # In this element, this option must exist or the path will be invalid. ("any" is an alias for "enumeration".)
-; required-any = ignore | enumeration | any        # In this element, either this or another option must exist (or an element)
-; required-absent = ignore | enumeration | any     # In this element, this option must not exist or the path will be invalid
-;
-; [Element ...]                          # For each element that we shall control. The "..." here is the element name,
-;                                        # or name and index separated by a comma.
-; required = ignore | switch | volume | enumeration | any     # If set, require this element to be of this kind and available,
-;                                                             # otherwise don't consider this path valid for the card
-; required-any = ignore | switch | volume | enumeration | any # If set, at least one of the elements or jacks with required-any in this
-;                                                             # path must be present, otherwise this path is invalid for the card
-; required-absent = ignore | switch | volume                  # If set, require this element to not be of this kind and not
-;                                                             # available, otherwise don't consider this path valid for the card
-;
-; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
-;                                            # always set it to off, always to on, or make it selectable as port.
-;                                            # If set to 'select' you need to define an Option section for on
-;                                            # and off
-; volume = ignore | merge | off | zero | <volume step> # What to do with this volume: ignore it, merge it into the device
-;                                                      # volume slider, always set it to the lowest value possible, or always
-;                                                      # set it to 0 dB (for whatever that means), or always set it to
-;                                                      # <volume step> (this only makes sense in path configurations where
-;                                                      # the exact hardware and driver are known beforehand).
-; volume-limit = <volume step>           # Limit the maximum volume by disabling the volume steps above <volume step>.
-; enumeration = ignore | select          # What to do with this enumeration, ignore it or make it selectable
-;                                        # via device ports. If set to 'select' you need to define an Option section
-;                                        # for each of the items you want to expose
-; direction = playback | capture         # Is this relevant only for playback or capture? If not set this will implicitly be
-;                                        # set the direction of the PCM device is opened as. Generally this doesn't need to be set
-;                                        # unless you have a broken driver that has playback controls marked for capture or vice
-;                                        # versa
-; direction-try-other = no | yes         # If the element does not supported what is requested, try the other direction, too?
-;
-; override-map.1 = ...                   # Override the channel mask of the mixer control if the control only exposes a single channel
-; override-map.2 = ...                   # Override the channel masks of the mixer control if the control only exposes two channels
-;                                        # Override maps should list for each element channel which high-level channels it controls via a
-;                                        # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
-;                                        # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
-;                                        # channels in a mask
-; [Jack ...]                           # For each jack that we will use for jack detection
-;                                      # The name 'Jack Foo' must match ALSA's 'Foo Jack' control.
-; required = ignore | any              # If not set to ignore, make the path invalid if this jack control is not present.
-; required-absent = ignore | any       # If not set to ignore, make the path invalid if this jack control is present.
-; required-any = ignore | any          # If not set to ignore, make the path invalid if no jack controls and no elements with
-;                                      # the required-any are present.
-; state.plugged = yes | no | unknown   # Normally a plugged jack would mean the port becomes available, and an unplugged means it's
-; state.unplugged = yes | no | unknown # unavailable, but the port status can be overridden by specifying state.plugged and/or state.unplugged.
-; append-pcm-to-name = no | yes        # Add ",pcm=N" to the jack name? N is the hw PCM device index. HDMI jacks have
-;                                      # the PCM device index in their name, but different drivers use different
-;                                      # numbering schemes, so we can't hardcode the full jack name in our configuration
-;                                      # files.
-
-[Element PCM]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element External Amplifier]
-switch = select
-
-[Option External Amplifier:on]
-name = output-amplifier-on
-priority = 10
-
-[Option External Amplifier:off]
-name = output-amplifier-off
-priority = 0
-
-[Element Bass Boost]
-switch = select
-
-[Option Bass Boost:on]
-name = output-bass-boost-on
-priority = 0
-
-[Option Bass Boost:off]
-name = output-bass-boost-off
-priority = 10
-
-[Element IEC958]
-switch = off
-
-[Element IEC958 Optical Raw]
-switch = off
-
-;;; 'Analog Output'
-
-[Element Analog Output]
-enumeration = select
-
-[Option Analog Output:Speakers]
-name = output-speaker
-priority = 10
-
-[Option Analog Output:Headphones]
-name = output-headphones
-priority = 9
-
-[Option Analog Output:FP Headphones]
-name = output-headphones
-priority = 8
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf
deleted file mode 100644
index bb3cec1..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort
-type = hdmi
-priority = 59
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf
deleted file mode 100644
index 3389a72..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 2
-type = hdmi
-priority = 58
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf
deleted file mode 100644
index 7607f8f..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-10.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 11
-type = hdmi
-priority = 49
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf
deleted file mode 100644
index 316d810..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 3
-type = hdmi
-priority = 57
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf
deleted file mode 100644
index 0601ef7..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 4
-type = hdmi
-priority = 56
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf
deleted file mode 100644
index ded155b..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 5
-type = hdmi
-priority = 55
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf
deleted file mode 100644
index de31791..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-5.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 6
-type = hdmi
-priority = 54
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf
deleted file mode 100644
index 6d72176..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-6.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 7
-type = hdmi
-priority = 53
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf
deleted file mode 100644
index d5d0771..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-7.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 8
-type = hdmi
-priority = 52
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf
deleted file mode 100644
index 0b8f9cd..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-8.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 9
-type = hdmi
-priority = 51
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf
deleted file mode 100644
index f15797c..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/hdmi-output-9.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-[General]
-description = HDMI / DisplayPort 10
-type = hdmi
-priority = 50
-eld-device = auto
-
-[Properties]
-device.icon_name = video-display
-
-[Jack HDMI/DP]
-append-pcm-to-name = yes
-required = ignore
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf
deleted file mode 100644
index babc839..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-input.conf
+++ /dev/null
@@ -1,20 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-[Element PCM Capture Source]
-enumeration = select
-
-[Option PCM Capture Source:IEC958 In]
-name = iec958-input
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf
deleted file mode 100644
index d47e5eb..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/iec958-stereo-output.conf
+++ /dev/null
@@ -1,18 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-
-[Element IEC958]
-switch = mute
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf
deleted file mode 100644
index 5842bfe..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-chat-common.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Steelseries Arctis 5 USB headset stereo chat path. The headset has two
-; output devices. The first one is meant for voice audio, and the second
-; one meant for everything else. The purpose of this unusual design is to
-; provide separate volume controls for voice and other audio, which can be
-; useful in gaming.
-
-[General]
-priority = 50
-
-[Element Com Speaker]
-switch = mute
-volume = merge
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf
deleted file mode 100644
index b758a6f..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/steelseries-arctis-output-game-common.conf
+++ /dev/null
@@ -1,27 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Steelseries Arctis 5 USB headset stereo game path. The headset has two
-; output devices. The first one is meant for voice audio, and the second
-; one meant for everything else. The purpose of this unusual design is to
-; provide separate volume controls for voice and other audio, which can be
-; useful in gaming.
-
-[General]
-priority = 99
-
-[Element PCM]
-switch = mute
-volume = merge
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf
deleted file mode 100644
index 9fa7fe9..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-input.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset microphone input path. These headsets usually have two
-; output devices. The first one is mono, meant for voice audio, and the second
-; one is stereo, meant for everything else. The purpose of this unusual design
-; is to provide separate volume controls for voice and other audio, which can
-; be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-
-[General]
-description-key = analog-input-microphone-headset
-
-[Element Headset]
-volume = merge
-switch = mute
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf
deleted file mode 100644
index 6df662f..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-mono.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset mono output path. These headsets usually have two
-; output devices. The first one is mono, meant for voice audio, and the second
-; one is stereo, meant for everything else. The purpose of this unusual design
-; is to provide separate volume controls for voice and other audio, which can
-; be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-
-[General]
-description-key = analog-output-headphones-mono
-
-[Element PCM]
-volume = merge
-switch = mute
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf
deleted file mode 100644
index 1a1e794..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/usb-gaming-headset-output-stereo.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset mono output path. These headsets usually have two
-; output devices. The first one is mono, meant for voice audio, and the second
-; one is stereo, meant for everything else. The purpose of this unusual design
-; is to provide separate volume controls for voice and other audio, which can
-; be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-
-[General]
-description-key = analog-output-headphones
-
-[Element PCM,1]
-volume = merge
-switch = mute
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf
deleted file mode 100644
index 7f111f2..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/paths/virtual-surround-7.1.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-[Element PCM,1]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf
deleted file mode 100644
index 043596e..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/audigy.conf
+++ /dev/null
@@ -1,94 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Creative Sound Blaster Audigy product line
-;
-; These are just copies of the mappings we find in default.conf, with the
-; small change of making analog-stereo and analog-mono non-fallback mappings.
-; This is needed because these cards only support duplex profiles with mono
-; inputs, and in the default configuration, with stereo being a fallback
-; mapping, the mono mapping is never tried.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = yes
-
-# Based on stereo-fallback
-[Mapping analog-stereo]
-device-strings = hw:%f
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-# Based on mono-fallback
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic
-priority = 1
-
-# The rest of these are identical to what's in default.conf
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf
deleted file mode 100644
index cc74852..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/behringer-umc22.conf
+++ /dev/null
@@ -1,68 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Behringer U-Phoria UMC22
-;
-; Default mapping only allows to use stereo input and sound card has two
-; physical input channels.
-;
-; However in case of only using a single input channel (like condenser
-; microphone) only one channel will have any sound, which is often
-; inconvenient for casual use.
-;
-; This config includes mono input options which makes it much more
-; friendly in single input configuration.
-;
-; This config also removes default digital input/output mappings that do
-; not physically exist on this card.
-;
-; Added by Nazar Mokrynskyi <nazar@mokrynskyi.com>
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo-input]
-device-strings = hw:%f
-channel-map = left,right
-paths-input = analog-input-mic
-direction = input
-priority = 4
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono,mono
-paths-input = analog-input-mic
-direction = input
-priority = 3
-
-[Mapping analog-mono-left]
-device-strings = hw:%f
-channel-map = mono,aux1
-paths-input = analog-input-mic
-direction = input
-priority = 2
-
-[Mapping analog-mono-right]
-device-strings = hw:%f
-channel-map = aux1,mono
-paths-input = analog-input-mic
-direction = input
-priority = 1
-
-[Mapping analog-stereo-output]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output
-direction = output
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf
deleted file mode 100644
index 1b6f61c..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-# Config for CMEDIA USB2.0 High-Speed True HD Audio 147a:e055
-# Added by Jean-Philippe Guillemin <h1p8r10n@gmail.com>
-
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 10
-
-# If everything else fails, try to use hw:0 as a stereo device.
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 7
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = hw:%f,2 hw:%f,0
-channel-map = left,right
-paths-output = iec958-stereo-output
-paths-input = iec958-stereo-input
-priority = 5
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf
deleted file mode 100644
index fc58982..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/default.conf
+++ /dev/null
@@ -1,589 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned (and should be good enough for the vast majority of
-; cards). If you want to assign a different profile set than this one
-; to a device, either set the udev property PULSE_PROFILE_SET for the
-; card, or use the "profile_set" module argument when loading
-; module-alsa-card.
-;
-; So what is this about? Simply, what we do here is map ALSA devices
-; to how they are exposed in PA. We say which ALSA device string to
-; use to open a device, which channel mapping to use then, and which
-; mixer path to use. This is encoded in a 'mapping'. Multiple of these
-; mappings can be bound together in a 'profile' which is then directly
-; exposed in the UI as a card profile. Each mapping assigned to a
-; profile will result in one sink/source to be created if the profile
-; is selected for the card.
-;
-; Additionally, the path set configuration files can describe the
-; decibel values assigned to the steps of the volume elements. This
-; can be used to work around situations when the alsa driver doesn't
-; provide any decibel information, or when the information is
-; incorrect.
-
-
-; [General]
-; auto-profiles = no | yes                  # Instead of defining all profiles manually, autogenerate
-;                                           # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ...                      # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ...                         # Channel mapping to use for this device
-; description = ...                         # Description for the mapping. Note that it's better to set the description
-;                                           # in the well_known_descriptions table in alsa-mixer.c than with this
-;                                           # option, because the descriptions in alsa-mixer.c are translatable.
-; description-key = ...                     # A custom key for the well_known_descriptions table (by default the mapping
-;                                           # name is used).
-; paths-input = ...                         # A list of mixer paths to use. Every path in this list will be probed.
-;                                           # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ...                       # Instead of configuring a full mixer path simply configure a single
-;                                           # mixer element for volume/mute handling. The value can be an element
-;                                           # name, or name and index separated by a comma.
-; element-output = ...
-; priority = ...
-; direction = any | input | output          # Only useful for?
-;
-; exact-channels = yes | no                 # If no, and the exact number of channels is not supported,
-;                                           # allow device to be opened with another channel count
-; fallback = no | yes                       # This mapping will only be considered if all non-fallback mappings fail
-; intended-roles = ...                      # Set the device.intended_roles property for the sink/source.
-;
-; [Profile id]
-; input-mappings = ...                      # Lists mappings for sources on this profile, those mapping must be
-;                                           # defined in this file too
-; output-mappings = ...                     # Lists mappings for sinks on this profile, those mappings must be
-;                                           # defined in this file too
-; description = ...
-; priority = ...                            # Numeric value to deduce priority for this profile
-; skip-probe = no | yes                     # Skip probing for availability? If this is yes then this profile
-;                                           # will be assumed as working without probing. Makes initialization
-;                                           # a bit faster but only works if the card is really known well.
-;
-; fallback = no | yes                       # This profile will only be considered if all non-fallback profiles fail
-; [DecibelFix element]                      # Decibel fixes can be used to work around missing or incorrect dB
-;                                           # information from alsa. A decibel fix is a table that maps volume steps
-;                                           # to decibel values for one volume element. The "element" part in the
-;                                           # section title is the name of the volume element (or name and index
-;                                           # separated by a comma).
-;                                           #
-;                                           # NOTE: This feature is meant just as a help for figuring out the correct
-;                                           # decibel values. PulseAudio is not the correct place to maintain the
-;                                           # decibel mappings!
-;                                           #
-;                                           # If you need this feature, then you should make sure that when you have
-;                                           # the correct values figured out, the alsa driver developers get informed
-;                                           # too, so that they can fix the driver.
-;
-; db-values = ...                           # The option value consists of pairs of step numbers and decibel values.
-;                                           # The pairs are separated with whitespace, and steps are separated from
-;                                           # the corresponding decibel values with a colon. The values must be in an
-;                                           # increasing order. Here's an example of a valid string:
-;                                           #
-;                                           #     "0:-40.50  1:-38.70  3:-33.00  11:0"
-;                                           #
-;                                           # The lowest step imposes a lower limit for hardware volume and the
-;                                           # highest step correspondingly imposes a higher limit. That means that
-;                                           # that the mixer will never be set outside those values - the rest of the
-;                                           # volume scale is done using software volume.
-;                                           #
-;                                           # As can be seen in the example, you don't need to specify a dB value for
-;                                           # each step. The dB values for skipped steps will be linearly interpolated
-;                                           # using the nearest steps that are given.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 15
-
-# If everything else fails, try to use hw:0 as a stereo device...
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-# ...and if even that fails, try to use hw:0 as a mono device.
-[Mapping mono-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic
-priority = 1
-
-# If everything else fails, try to use hw:0 as a stereo device.
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 13
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 12
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = iec958-stereo-output
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping iec958-dts-surround-51]
-device-strings = dca:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-description = Digital Stereo (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = left,right
-priority = 9
-direction = output
-
-[Mapping hdmi-surround]
-description = Digital Surround 5.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 8
-direction = output
-
-[Mapping hdmi-surround71]
-description = Digital Surround 7.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 8
-direction = output
-
-[Mapping hdmi-dts-surround]
-description = Digital Surround 5.1 (HDMI/DTS)
-device-strings = dcahdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra1]
-description = Digital Stereo (HDMI 2)
-device-strings = hdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra1]
-description = Digital Surround 5.1 (HDMI 2)
-device-strings = hdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra1]
-description = Digital Surround 7.1 (HDMI 2)
-device-strings = hdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra1]
-description = Digital Surround 5.1 (HDMI 2/DTS)
-device-strings = dcahdmi:%f,1
-paths-output = hdmi-output-1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra2]
-description = Digital Stereo (HDMI 3)
-device-strings = hdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra2]
-description = Digital Surround 5.1 (HDMI 3)
-device-strings = hdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra2]
-description = Digital Surround 7.1 (HDMI 3)
-device-strings = hdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra2]
-description = Digital Surround 5.1 (HDMI 3/DTS)
-device-strings = dcahdmi:%f,2
-paths-output = hdmi-output-2
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra3]
-description = Digital Stereo (HDMI 4)
-device-strings = hdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra3]
-description = Digital Surround 5.1 (HDMI 4)
-device-strings = hdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra3]
-description = Digital Surround 7.1 (HDMI 4)
-device-strings = hdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra3]
-description = Digital Surround 5.1 (HDMI 4/DTS)
-device-strings = dcahdmi:%f,3
-paths-output = hdmi-output-3
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra4]
-description = Digital Stereo (HDMI 5)
-device-strings = hdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra4]
-description = Digital Surround 5.1 (HDMI 5)
-device-strings = hdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra4]
-description = Digital Surround 7.1 (HDMI 5)
-device-strings = hdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra4]
-description = Digital Surround 5.1 (HDMI 5/DTS)
-device-strings = dcahdmi:%f,4
-paths-output = hdmi-output-4
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra5]
-description = Digital Stereo (HDMI 6)
-device-strings = hdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra5]
-description = Digital Surround 5.1 (HDMI 6)
-device-strings = hdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra5]
-description = Digital Surround 7.1 (HDMI 6)
-device-strings = hdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra5]
-description = Digital Surround 5.1 (HDMI 6/DTS)
-device-strings = dcahdmi:%f,5
-paths-output = hdmi-output-5
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra6]
-description = Digital Stereo (HDMI 7)
-device-strings = hdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra6]
-description = Digital Surround 5.1 (HDMI 7)
-device-strings = hdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra6]
-description = Digital Surround 7.1 (HDMI 7)
-device-strings = hdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra6]
-description = Digital Surround 5.1 (HDMI 7/DTS)
-device-strings = dcahdmi:%f,6
-paths-output = hdmi-output-6
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra7]
-description = Digital Stereo (HDMI 8)
-device-strings = hdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra7]
-description = Digital Surround 5.1 (HDMI 8)
-device-strings = hdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra7]
-description = Digital Surround 7.1 (HDMI 8)
-device-strings = hdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra7]
-description = Digital Surround 5.1 (HDMI 8/DTS)
-device-strings = dcahdmi:%f,7
-paths-output = hdmi-output-7
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra8]
-description = Digital Stereo (HDMI 9)
-device-strings = hdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra8]
-description = Digital Surround 5.1 (HDMI 9)
-device-strings = hdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra8]
-description = Digital Surround 7.1 (HDMI 9)
-device-strings = hdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra8]
-description = Digital Surround 5.1 (HDMI 9/DTS)
-device-strings = dcahdmi:%f,8
-paths-output = hdmi-output-8
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra9]
-description = Digital Stereo (HDMI 10)
-device-strings = hdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra9]
-description = Digital Surround 5.1 (HDMI 10)
-device-strings = hdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra9]
-description = Digital Surround 7.1 (HDMI 10)
-device-strings = hdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra9]
-description = Digital Surround 5.1 (HDMI 10/DTS)
-device-strings = dcahdmi:%f,9
-paths-output = hdmi-output-9
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-stereo-extra10]
-description = Digital Stereo (HDMI 11)
-device-strings = hdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = left,right
-priority = 7
-direction = output
-
-[Mapping hdmi-surround-extra10]
-description = Digital Surround 5.1 (HDMI 11)
-device-strings = hdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping hdmi-surround71-extra10]
-description = Digital Surround 7.1 (HDMI 11)
-device-strings = hdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 6
-direction = output
-
-[Mapping hdmi-dts-surround-extra10]
-description = Digital Surround 5.1 (HDMI 11/DTS)
-device-strings = dcahdmi:%f,10
-paths-output = hdmi-output-10
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 6
-direction = output
-
-[Mapping multichannel-output]
-device-strings = hw:%f
-channel-map = left,right,rear-left,rear-right
-exact-channels = false
-fallback = yes
-priority = 1
-direction = output
-
-[Mapping multichannel-input]
-device-strings = hw:%f
-channel-map = left,right,rear-left,rear-right
-exact-channels = false
-fallback = yes
-priority = 1
-direction = input
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf
deleted file mode 100644
index 1186552..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/dell-dock-tb16-usb-audio.conf
+++ /dev/null
@@ -1,55 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Dell Dock TB16 USB audio
-;
-; This card has two stereo pairs of output, One Mono input.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-headphone]
-description = Headphone
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-speaker]
-description = Speaker
-device-strings = hw:%f,1,0
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-mic]
-description = Headset-Mic
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = input
-
-
-[Profile output:analog-stereo-speaker]
-description = Speaker
-output-mappings = analog-stereo-speaker
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone+input:analog-stereo-mic]
-description = Headset
-output-mappings = analog-stereo-headphone
-input-mappings = analog-stereo-mic
-priority = 80
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf
deleted file mode 100644
index 41924f4..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker-and-int-mic.conf
+++ /dev/null
@@ -1,153 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; This profile forces speaker and internal mic ports even if we have no way
-; of identifying those.
-; See default.conf for explanations.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-4-channel-input]
-# Alsa doesn't currently provide any better device name than "hw" for 4-channel
-# input. If this causes trouble at some point, then we will need to get a new
-# device name standardized in alsa.
-device-strings = hw:%f
-channel-map = aux0,aux1,aux2,aux3
-priority = 1
-direction = input
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = iec958-stereo-output
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping iec958-dts-surround-51]
-device-strings = dca:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-description = Digital Stereo (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = left,right
-priority = 4
-direction = output
-
-[Mapping hdmi-surround]
-description = Digital Surround 5.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-surround71]
-description = Digital Surround 7.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 3
-direction = output
-
-[Mapping hdmi-dts-surround]
-description = Digital Surround 5.1 (HDMI/DTS)
-device-strings = dcahdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf
deleted file mode 100644
index dec57d5..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/force-speaker.conf
+++ /dev/null
@@ -1,152 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; This profile forces a speaker port even if we have no way of identifying it.
-; See default.conf for explanations.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-21]
-device-strings = surround21:%f
-channel-map = front-left,front-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-lineout analog-output-speaker-always
-priority = 7
-direction = output
-
-[Mapping analog-4-channel-input]
-# Alsa doesn't currently provide any better device name than "hw" for 4-channel
-# input. If this causes trouble at some point, then we will need to get a new
-# device name standardized in alsa.
-device-strings = hw:%f
-channel-map = aux0,aux1,aux2,aux3
-priority = 1
-direction = input
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-input = iec958-stereo-input
-paths-output = iec958-stereo-output
-priority = 5
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = iec958-stereo-output
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping iec958-dts-surround-51]
-device-strings = dca:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = iec958-stereo-output
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-description = Digital Stereo (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = left,right
-priority = 4
-direction = output
-
-[Mapping hdmi-surround]
-description = Digital Surround 5.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-surround71]
-description = Digital Surround 7.1 (HDMI)
-device-strings = hdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 3
-direction = output
-
-[Mapping hdmi-dts-surround]
-description = Digital Surround 5.1 (HDMI/DTS)
-device-strings = dcahdmi:%f
-paths-output = hdmi-output-0
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf
deleted file mode 100644
index a683a4e..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-120w-g2.conf
+++ /dev/null
@@ -1,35 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; HP Thunderbolt Dock 120W G2
-;
-; This dock has a 3.5mm headset connector. Both input and output are stereo.
-;
-; There's a separate speakerphone module called "HP Thunderbolt Dock Audio
-; Module", which can be attached to this dock. The module will appear in ALSA
-; as a separate USB sound card, configuration for it is in
-; hp-tbt-dock-audio-module.conf.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-headset]
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Profile output:analog-stereo-headset+input:analog-stereo-headset]
-output-mappings = analog-stereo-headset
-input-mappings = analog-stereo-headset
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf
deleted file mode 100644
index 692ab8d..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/hp-tbt-dock-audio-module.conf
+++ /dev/null
@@ -1,36 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; HP Thunderbolt Dock Audio Module
-;
-; This device attaches to the "HP Thunderbolt Dock 120W G2" dock. The audio
-; module provides a speakerphone with echo cancellation and appears in ALSA as
-; a USB sound card with stereo input and output.
-;
-; The dock itself has a 3.5mm headset connector and appears as a separate USB
-; sound card, configuration for it is in hp-tbt-dock-120w-g2.conf.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-speakerphone]
-device-strings = hw:%f,0,0
-channel-map = left,right
-intended-roles = phone
-
-[Profile output:analog-stereo-speakerphone+input:analog-stereo-speakerphone]
-output-mappings = analog-stereo-speakerphone
-input-mappings = analog-stereo-speakerphone
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf
deleted file mode 100644
index d51fd17..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/kinect-audio.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Audio profile for the Microsoft Kinect Sensor device in UAC mode.
-;
-; Copyright (C) 2011  Antonio Ospite <ospite@studenti.unina.it>
-;
-; This device has an array of four microphones, and no playback capability.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping input-4-channels]
-device-strings = hw:%f
-channel-map = front-left,front-right,rear-left,rear-right
-description = 4 Channels Input
-direction = input
-priority = 5
-
-[Profile input:mic-array]
-description = Microphone Array
-input-mappings = input-4-channels
-priority = 2
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf
deleted file mode 100644
index 5122907..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/maudio-fasttrack-pro.conf
+++ /dev/null
@@ -1,86 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; M-Audio FastTrack Pro
-;
-; This card has one duplex stereo channel called A and an additional
-; stereo output channel called B.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a-output]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = output
-
-; Try both device 0 and device 1 for input, see
-; http://mailman.alsa-project.org/pipermail/alsa-devel/2012-March/050701.html
-[Mapping analog-stereo-a-input]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0 hw:%f,1,0
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B
-device-strings = hw:%f,1,0
-channel-map = left,right
-direction = output
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channel A, Analog Stereo output Channel B
-output-mappings = analog-stereo-a-output  analog-stereo-b-output
-input-mappings = analog-stereo-a-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a-output+input:analog-stereo-a-input]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a-output
-input-mappings = analog-stereo-a-input
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b-output
-input-mappings =
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a-output
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a-input
-priority = 2
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf
deleted file mode 100644
index f7cbc15..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio4dj.conf
+++ /dev/null
@@ -1,90 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 4 DJ
-;
-; This card has two stereo pairs of input and two stereo pairs of
-; output, named channels A and B. Channel B has an additional
-; Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B (Headphones)
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b-input]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b-output
-input-mappings = analog-stereo-a analog-stereo-b-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-input-mappings = analog-stereo-b-input
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b-input
-priority = 1
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf
deleted file mode 100644
index dc1b780..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-audio8dj.conf
+++ /dev/null
@@ -1,161 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 8 DJ
-;
-; This card has four stereo pairs of input and four stereo pairs of
-; output, named channels A to D. Channel C has an additional Mic/Line
-; connector, channel D an additional Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-
-# Since we want to set a different description for channel C's/D's input
-# and output we define two separate mappings for them
-[Mapping analog-stereo-c-output]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C (Line/Mic)
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-output]
-description = Analog Stereo Channel D (Headphones)
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-c]
-description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-c-input
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
-description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
-output-mappings = analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 80
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-b
-input-mappings = analog-stereo-b
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-c+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C (Line/Mic)
-output-mappings = analog-stereo-c-output
-input-mappings = analog-stereo-c-input
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-d-input
-priority = 70
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 6
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-c]
-description = Analog Stereo Output Channel C
-output-mappings = analog-stereo-c-output
-priority = 7
-skip-probe = yes
-
-[Profile output:analog-stereo-d]
-description = Analog Stereo Output Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-priority = 8
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b
-priority = 1
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C (Line/Mic)
-input-mappings = analog-stereo-c-input
-priority = 4
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 3
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf
deleted file mode 100644
index 92b89da..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-komplete-audio6.conf
+++ /dev/null
@@ -1,111 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Komplete Audio 6
-;
-; This card has three stereo pairs of input and three stereo pairs of
-; output.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-out-ab]
-description = Analog Stereo 1/2
-device-strings = hw:%f,0,0
-channel-map = left,right,aux0,aux1,aux2,aux3
-direction = output
-
-[Mapping analog-stereo-out-cd]
-description = Analog Stereo 3/4
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,left,right,aux2,aux3
-direction = output
-
-[Mapping stereo-out-ef]
-description = Analog Stereo 5/6
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,aux2,aux3,left,right
-direction = output
-
-[Mapping analog-mono-in-a]
-description = Analog Mono Input 1
-device-strings = hw:%f,0,0
-channel-map = mono,aux0,aux1,aux2,aux3,aux4
-direction = input
-
-[Mapping analog-mono-in-b]
-description = Anlog Mono Input 2
-device-strings = hw:%f,0,0
-channel-map = aux0,mono,aux1,aux2,aux3,aux4
-direction = input
-
-[Mapping analog-stereo-in-ab]
-description = Analog Stereo Input 1/2
-device-strings = hw:%f,0,0
-channel-map = left,right,aux0,aux1,aux2,aux3
-direction = input
-
-[Mapping analog-stereo-in-cd]
-description = Analog Stereo Input 3/4
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,left,right,aux2,aux3
-direction = input
-
-[Mapping stereo-in-ef]
-description = Stereo Input 5/6
-device-strings = hw:%f,0,0
-channel-map = aux0,aux1,aux2,aux3,left,right
-direction = input
-
-[Profile output:analog-stereo-out-ab+input:analog-stereo-in-ab]
-description = Analog Stereo Output 1/2, Analog Stereo Input 1/2
-output-mappings = analog-stereo-out-ab
-input-mappings = analog-stereo-in-ab
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-out-ab+input:analog-mono-in-a]
-description = Analog Stereo Output 1/2, Analog Mono Input 1
-output-mappings = analog-stereo-out-ab
-input-mappings = analog-mono-in-a
-priority = 95
-skip-probe = yes
-
-[Profile output:analog-stereo-out-ab+input:analog-mono-in-b]
-description = Analog Stereo Output 1/2, Analog Mono Input 2
-output-mappings = analog-stereo-out-ab
-input-mappings = analog-mono-in-b
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-out-cd+input:analog-stereo-in-cd]
-description = Analog Stereo Output 3/4, Analog Stereo Input 3/4
-output-mappings = analog-stereo-out-cd
-input-mappings = analog-stereo-in-cd
-priority = 80
-skip-probe = yes
-
-[Profile output:stereo-out-ef+input:stereo-in-ef]
-description = Stereo Output 5/6 (S/PDIF), Stereo Input 5/6 (S/PDIF)
-output-mappings = stereo-out-ef
-input-mappings = stereo-in-ef
-priority = 70
-skip-probe = yes
-
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf
deleted file mode 100644
index 35b3d06..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-korecontroller.conf
+++ /dev/null
@@ -1,84 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Kore Controller
-;
-; This card has one stereo pairs of input and two stereo pairs of
-; output, named "Master" and "Headphone". The master channel has
-; an additional Coax S/PDIF connector which is always on.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-master-out]
-description = Analog Stereo Master Channel
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-headphone-out]
-description = Analog Stereo Headphone Channel
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-input]
-description = Analog Stereo
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Master Output, Headphones Output
-output-mappings = analog-stereo-master-out analog-stereo-headphone-out
-input-mappings = analog-stereo-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-master+input:analog-stereo-input]
-description = Analog Stereo Duplex Master Output
-output-mappings = analog-stereo-master-out
-input-mappings = analog-stereo-input
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone-out+input:analog-stereo-input]
-description = Analog Stereo Headphones Output
-output-mappings = analog-stereo-headphone-out
-input-mappings = analog-stereo-input
-priority = 30
-skip-probe = yes
-
-[Profile output:analog-stereo-master]
-description = Analog Stereo Master Output
-output-mappings = analog-stereo-master-out
-priority = 3
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone]
-description = Analog Stereo Headphones Output
-output-mappings = analog-stereo-headphone-out
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-input]
-description = Analog Stereo Input
-input-mappings = analog-stereo-input
-priority = 1
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf
deleted file mode 100644
index c210297..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio10.conf
+++ /dev/null
@@ -1,130 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 10 DJ
-;
-; This card has five stereo pairs of input and five stereo pairs of
-; output
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-out-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-out-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-c]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-d]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-in-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-in-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-c]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-d]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-
-
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels Main, A, B, C, D
-output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b analog-stereo-out-c analog-stereo-out-d
-input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b analog-stereo-in-c analog-stereo-in-d
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-main+input:analog-stereo-main]
-description = Analog Stereo Duplex Main
-output-mappings = analog-stereo-out-main
-input-mappings = analog-stereo-in-main
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-out-a
-input-mappings = analog-stereo-in-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-out-b
-input-mappings = analog-stereo-in-b
-priority = 30
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C
-output-mappings = analog-stereo-out-c
-input-mappings = analog-stereo-in-c
-priority = 20
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D
-output-mappings = analog-stereo-out-d
-input-mappings = analog-stereo-in-d
-priority = 10
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf
deleted file mode 100644
index 145dace..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio2.conf
+++ /dev/null
@@ -1,53 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Traktor Audio 2
-;
-; This card has two stereo pairs of output.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 50
-skip-probe = yes
-
-[Profile analog-stereo-all]
-description = Analog Stereo Output Channels A & B
-output-mappings = analog-stereo-a analog-stereo-b
-priority = 100
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf
deleted file mode 100644
index a08e9fc..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktor-audio6.conf
+++ /dev/null
@@ -1,91 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Audio 6 DJ
-;
-; This card has three stereo pairs of input and three stereo pairs of
-; output
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-out-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-out-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-out-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-in-main]
-description = Analog Stereo Main
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-in-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-in-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b
-input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-main+input:analog-stereo-main]
-description = Analog Stereo Duplex Channel Main
-output-mappings = analog-stereo-out-main
-input-mappings = analog-stereo-in-main
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-out-a
-input-mappings = analog-stereo-in-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-out-b
-input-mappings = analog-stereo-in-b
-priority = 30
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf
deleted file mode 100644
index 934965f..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/native-instruments-traktorkontrol-s4.conf
+++ /dev/null
@@ -1,80 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Native Instruments Traktor Kontrol S4
-;
-; This controller has two stereo pairs of input (named "Channel C" and
-; "Channel D") and two stereo pairs of output, one "Main Out" and
-; "Headphone Out".
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-output-main]
-description = Analog Stereo Main Out
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-output-headphone]
-description = Analog Stereo Headphones Out
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex
-output-mappings = analog-stereo-output-main analog-stereo-output-headphone
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-main]
-description = Analog Stereo Main Output
-output-mappings = analog-stereo-output-main
-priority = 4
-skip-probe = yes
-
-[Profile output:analog-stereo-headphone]
-description = Analog Stereo Output Headphones Out
-output-mappings = analog-stereo-output-headphone
-priority = 3
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C
-input-mappings = analog-stereo-c-input
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 1
-skip-probe = yes
-
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf
deleted file mode 100644
index d5d1d65..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/sb-omni-surround-5.1.conf
+++ /dev/null
@@ -1,112 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; Creative Sound Blaster Omni Surround 5.1
-;
-; This config supports Linux 4.3-rc1+.
-; By default there are some non-existing (physically) inputs and outputs that
-; are not present in this config.
-; Also in addition to natively supported modes (such as stereo, 5.1 and stereo
-; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0.
-;
-; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-input]
-device-strings = hw:%f
-channel-map = left,right
-paths-input = analog-input-mic analog-input-linein
-direction = input
-
-[Mapping analog-stereo-output]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-21]
-device-strings = surround51:%f
-channel-map = front-left,front-right,aux1,aux2,aux3,lfe
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-40]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-paths-output = iec958-stereo-output
-direction = output
-
-[Profile output:analog-stereo-output+input:analog-stereo-input]
-output-mappings = analog-stereo-output
-input-mappings = analog-stereo-input
-priority = 7
-
-[Profile output:analog-surround-21+input:analog-stereo-input]
-output-mappings = analog-surround-21
-input-mappings = analog-stereo-input
-priority = 6
-
-[Profile output:analog-surround-40+input:analog-stereo-input]
-output-mappings = analog-surround-40
-input-mappings = analog-stereo-input
-priority = 5
-
-[Profile output:analog-surround-41+input:analog-stereo-input]
-output-mappings = analog-surround-41
-input-mappings = analog-stereo-input
-priority = 4
-
-[Profile output:analog-surround-50+input:analog-stereo-input]
-output-mappings = analog-surround-50
-input-mappings = analog-stereo-input
-priority = 3
-
-[Profile output:analog-surround-51+input:analog-stereo-input]
-output-mappings = analog-surround-51
-input-mappings = analog-stereo-input
-priority = 2
-
-[Profile output:iec958-stereo+input:analog-stereo-input]
-output-mappings = iec958-stereo
-input-mappings = analog-stereo-input
-priority = 1
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf
deleted file mode 100644
index 0ac1576..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/sennheiser-gsx.conf
+++ /dev/null
@@ -1,58 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB Gaming DAC.
-; These devices have two output devices. The first one is mono, meant for
-; voice audio, and the second one is 7.1 surround, meant for everything
-; else. The 7.1 surround is mapped to headphones within the device.
-; The purpose of the mono/7.1 design is to provide separate volume
-; controls for voice and other audio, which can be useful in gaming.
-;
-; Works with:
-; Sennheiser GSX 1000
-; Sennheiser GSX 1200
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-chat-output]
-device-strings = hw:%f,0
-channel-map = mono
-paths-output = analog-chat-output
-direction = output
-priority = 4000
-intended-roles = phone
-
-[Mapping analog-output-surround71]
-device-strings = hw:%f,1
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-paths-output = virtual-surround-7.1
-priority = 4100
-direction = output
-
-[Mapping analog-chat-input]
-device-strings = hw:%f,0
-channel-map = mono
-paths-input = analog-chat-input
-priority = 4100
-direction = input
-
-[Profile output:analog-output-surround71+output:analog-output-chat+input:analog-input]
-output-mappings = analog-output-surround71 analog-chat-output
-input-mappings = analog-chat-input
-priority = 5100
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf
deleted file mode 100644
index 809d015..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/simple-headphones-mic.conf
+++ /dev/null
@@ -1,42 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; This is a profile meant for simple (stereo + mic) headphones.
-; default.conf also works but using this one will hide some profiles
-; that don't make sense like IEC958 and multichannel inputs.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-stereo]
-device-strings = front:%f
-channel-map = left,right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 15
-
-# If everything else fails, try to use hw:0 as a stereo device...
-[Mapping stereo-fallback]
-device-strings = hw:%f
-fallback = yes
-channel-map = front-left,front-right
-paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
-paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 1
-
-[Mapping analog-mono]
-device-strings = hw:%f,0,0
-channel-map = mono
-direction = input
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf
deleted file mode 100644
index 0c58917..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/steelseries-arctis-common-usb-audio.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-[General]
-auto-profiles = yes
-
-[Mapping analog-chat]
-description-key = gaming-headset-chat
-device-strings = hw:%f,0,0
-channel-map = left,right
-paths-input = analog-input-mic
-paths-output = steelseries-arctis-output-chat-common
-intended-roles = phone
-
-[Mapping analog-game]
-description-key = gaming-headset-game
-device-strings = hw:%f,1,0
-channel-map = left,right
-paths-output = steelseries-arctis-output-game-common
-direction = output
-
-[Profile output:analog-chat+output:analog-game+input:analog-chat]
-output-mappings = analog-chat analog-game
-input-mappings = analog-chat
-priority = 5100
-skip-probe = yes
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf
deleted file mode 100644
index 6c44736..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/tizen_usb.conf
+++ /dev/null
@@ -1,136 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned (and should be good enough for the vast majority of
-; cards). If you want to assign a different profile set than this one
-; to a device, either set the udev property PULSE_PROFILE_SET for the
-; card, or use the "profile_set" module argument when loading
-; module-alsa-card.
-;
-; So what is this about? Simply, what we do here is map ALSA devices
-; to how they are exposed in PA. We say which ALSA device string to
-; use to open a device, which channel mapping to use then, and which
-; mixer path to use. This is encoded in a 'mapping'. Multiple of these
-; mappings can be bound together in a 'profile' which is then directly
-; exposed in the UI as a card profile. Each mapping assigned to a
-; profile will result in one sink/source to be created if the profile
-; is selected for the card.
-;
-; Additionally, the path set configuration files can describe the
-; decibel values assigned to the steps of the volume elements. This
-; can be used to work around situations when the alsa driver doesn't
-; provide any decibel information, or when the information is
-; incorrect.
-
-
-; [General]
-; auto-profiles = no | yes                  # Instead of defining all profiles manually, autogenerate
-;                                           # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ...                      # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ...                         # Channel mapping to use for this device
-; description = ...
-; paths-input = ...                         # A list of mixer paths to use. Every path in this list will be probed.
-;                                           # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ...                       # Instead of configuring a full mixer path simply configure a single
-;                                           # mixer element for volume/mute handling
-; element-output = ...
-; priority = ...
-; direction = any | input | output          # Only useful for?
-;
-; [Profile id]
-; input-mappings = ...                      # Lists mappings for sources on this profile, those mapping must be
-;                                           # defined in this file too
-; output-mappings = ...                     # Lists mappings for sinks on this profile, those mappings must be
-;                                           # defined in this file too
-; description = ...
-; priority = ...                            # Numeric value to deduce priority for this profile
-; skip-probe = no | yes                     # Skip probing for availability? If this is yes then this profile
-;                                           # will be assumed as working without probing. Makes initialization
-;                                           # a bit faster but only works if the card is really known well.
-;
-; [DecibelFix element]                      # Decibel fixes can be used to work around missing or incorrect dB
-;                                           # information from alsa. A decibel fix is a table that maps volume steps
-;                                           # to decibel values for one volume element. The "element" part in the
-;                                           # section title is the name of the volume element.
-;                                           #
-;                                           # NOTE: This feature is meant just as a help for figuring out the correct
-;                                           # decibel values. PulseAudio is not the correct place to maintain the
-;                                           # decibel mappings!
-;                                           #
-;                                           # If you need this feature, then you should make sure that when you have
-;                                           # the correct values figured out, the alsa driver developers get informed
-;                                           # too, so that they can fix the driver.
-;
-; db-values = ...                           # The option value consists of pairs of step numbers and decibel values.
-;                                           # The pairs are separated with whitespace, and steps are separated from
-;                                           # the corresponding decibel values with a colon. The values must be in an
-;                                           # increasing order. Here's an example of a valid string:
-;                                           #
-;                                           #     "0:-40.50  1:-38.70  3:-33.00  11:0"
-;                                           #
-;                                           # The lowest step imposes a lower limit for hardware volume and the
-;                                           # highest step correspondingly imposes a higher limit. That means that
-;                                           # that the mixer will never be set outside those values - the rest of the
-;                                           # volume scale is done using software volume.
-;                                           #
-;                                           # As can be seen in the example, you don't need to specify a dB value for
-;                                           # each step. The dB values for skipped steps will be linearly interpolated
-;                                           # using the nearest steps that are given.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:%f
-channel-map = mono
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping usb-analog-stereo]
-device-strings = hw:%f
-channel-map = left,right
-paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping usb-analog-surround-51]
-device-strings = hw:%f
-;channel-map = front-left,front-right,front-center,lfe,rear-left,rear-right
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-lfe-on-mono
-priority = 180
-direction = output
-
-[Mapping multichannel-input]
-device-strings = hw:%f
-channel-map = left,right,rear-left,rear-right
-exact-channels = false
-fallback = yes
-priority = 1
-direction = input
-paths-input = multichannel-input
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
diff --git a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf b/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf
deleted file mode 100644
index adda54d..0000000
--- a/media-config-target-rpi3-spk/hal/share/pulseaudio/alsa-mixer/profile-sets/usb-gaming-headset.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-; USB gaming headset.
-; These headsets usually have two output devices. The first one is meant
-; for voice audio, and the second one is meant for everything else.
-; The purpose of this unusual design is to provide separate volume
-; controls for voice and other audio, which can be useful in gaming.
-;
-; Works with:
-; Steelseries Arctis 7
-; Steelseries Arctis Pro Wireless.
-; Lucidsound LS31
-; Astro A50
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = yes
-
-[Mapping mono-chat]
-description-key = gaming-headset-chat
-device-strings = hw:%f,0,0
-channel-map = mono
-paths-output = usb-gaming-headset-output-mono
-paths-input = usb-gaming-headset-input
-intended-roles = phone
-
-[Mapping stereo-chat]
-description-key = gaming-headset-chat
-device-strings = hw:%f,0,0
-channel-map = left,right
-paths-output = usb-gaming-headset-output-stereo
-paths-input = usb-gaming-headset-input
-intended-roles = phone
-
-[Mapping stereo-game]
-description-key = gaming-headset-game
-device-strings = hw:%f,1,0
-channel-map = left,right
-paths-output = usb-gaming-headset-output-stereo
-direction = output
-
-[Profile output:mono-chat+output:stereo-game+input:mono-chat]
-output-mappings = mono-chat stereo-game
-input-mappings = mono-chat
-priority = 5100
-
-[Profile output:stereo-game+output:stereo-chat+input:mono-chat]
-output-mappings = stereo-game stereo-chat
-input-mappings = mono-chat
-priority = 5100
diff --git a/packaging/media-config.spec b/packaging/media-config.spec
index dcc5d3c..efe7125 100644
--- a/packaging/media-config.spec
+++ b/packaging/media-config.spec
@@ -2,7 +2,7 @@
 
 Name:       media-config
 Summary:    Multimedia Framework system configuration package
-Version:    0.3.64
+Version:    0.3.65
 Release:    0
 Group:      Multimedia/Configuration
 License:    LGPL-2.1 and Apache-2.0
@@ -23,14 +23,6 @@ License: LGPL-2.1 and Apache-2.0
 %description target-tm1
 Multimedia Framework system configuration package including ini, conf and etc files for tm1 target.
 
-%package target-artik10
-Summary: Multimedia Framework system configuration package for artik 10
-Group: Multimedia/Configuration
-License: LGPL-2.1 and Apache-2.0
-
-%description target-artik10
-Multimedia Framework system configuration package including ini, conf and etc files for artik 10 target.
-
 %package target-rpi3
 Summary: Multimedia Framework system configuration package for rpi3
 Group: Multimedia/Configuration
@@ -47,14 +39,6 @@ License: LGPL-2.1 and Apache-2.0
 %description target-tw3
 Multimedia Framework system configuration package including ini, conf and etc files for tw3 target.
 
-%package target-rpi3-spk
-Summary: Multimedia Framework system configuration package for rpi3 speaker
-Group: Multimedia/Configuration
-License: LGPL-2.1 and Apache-2.0
-
-%description target-rpi3-spk
-Multimedia Framework system configuration package including ini, conf and etc files for rpi3 speaker target.
-
 %package target-c4
 Summary: Multimedia Framework system configuration package for ODROID-C4
 Group: Multimedia/Configuration
@@ -112,12 +96,6 @@ cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-tm1
 mkdir -p %{buildroot}%{_hal_datadir}/%{name}-target-tm1
 cp -arf %{name}-target-tm1/* %{buildroot}%{_hal_datadir}/%{name}-target-tm1
 
-mkdir -p %{buildroot}%{_hal_licensedir}/%{name}-target-artik10
-cp LICENSE.APLv2.0 %{buildroot}%{_hal_licensedir}/%{name}-target-artik10
-cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-artik10
-mkdir -p %{buildroot}%{_hal_datadir}/%{name}-target-artik10
-cp -arf %{name}-target-artik10/* %{buildroot}%{_hal_datadir}/%{name}-target-artik10
-
 mkdir -p %{buildroot}%{_hal_licensedir}/%{name}-target-rpi3
 cp LICENSE.APLv2.0 %{buildroot}%{_hal_licensedir}/%{name}-target-rpi3
 cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-rpi3
@@ -130,12 +108,6 @@ cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-tw3
 mkdir -p %{buildroot}%{_hal_datadir}/%{name}-target-tw3
 cp -arf %{name}-target-tw3/* %{buildroot}%{_hal_datadir}/%{name}-target-tw3
 
-mkdir -p %{buildroot}%{_hal_licensedir}/%{name}-target-rpi3-spk
-cp LICENSE.APLv2.0 %{buildroot}%{_hal_licensedir}/%{name}-target-rpi3-spk
-cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-rpi3-spk
-mkdir -p %{buildroot}%{_hal_datadir}/%{name}-target-rpi3-spk
-cp -arf %{name}-target-rpi3-spk/* %{buildroot}%{_hal_datadir}/%{name}-target-rpi3-spk
-
 mkdir -p %{buildroot}%{_hal_licensedir}/%{name}-target-c4
 cp LICENSE.APLv2.0 %{buildroot}%{_hal_licensedir}/%{name}-target-c4
 cp LICENSE.LGPLv2.1 %{buildroot}%{_hal_licensedir}/%{name}-target-c4
@@ -170,10 +142,6 @@ cp -arf %{name}-simulator/* %{buildroot}%{_hal_datadir}/%{name}-simulator
 cp -arf %{_hal_datadir}/%{name}-target-tm1/* /
 rm -rf %{_hal_datadir}/%{name}-target-tm1
 
-%post target-artik10
-cp -arf %{_hal_datadir}/%{name}-target-artik10/* /
-rm -rf %{_hal_datadir}/%{name}-target-artik10
-
 %post target-rpi3
 cp -arf %{_hal_datadir}/%{name}-target-rpi3/* /
 rm -rf %{_hal_datadir}/%{name}-target-rpi3
@@ -183,10 +151,6 @@ sed -i -e 's|@HAL_LIBDIR@|%{_hal_libdir}|g' %{_hal_datadir}/%{name}-target-tw3%{
 cp -arf %{_hal_datadir}/%{name}-target-tw3/* /
 rm -rf %{_hal_datadir}/%{name}-target-tw3
 
-%post target-rpi3-spk
-cp -arf %{_hal_datadir}/%{name}-target-rpi3-spk/* /
-rm -rf %{_hal_datadir}/%{name}-target-rpi3-spk
-
 %post target-c4
 cp -arf %{_hal_datadir}/%{name}-target-c4/* /
 rm -rf %{_hal_datadir}/%{name}-target-c4
@@ -228,19 +192,6 @@ rm -rf %{_hal_datadir}/%{name}-simulator
 %{_hal_datadir}/%{name}-target-tm1%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.common
 %{_hal_datadir}/%{name}-target-tm1%{_hal_datadir}/pulseaudio/alsa-mixer/profile-sets/*.conf
 
-%files target-artik10
-%manifest %{name}-target-artik10.manifest
-%{_hal_licensedir}/%{name}-target-artik10/*
-%defattr(-,root,root,-)
-%{_hal_datadir}/%{name}-target-artik10%{_hal_sysconfdir}/asound.conf
-%{_hal_datadir}/%{name}-target-artik10%{_hal_sysconfdir}/pulse/*
-%{_hal_datadir}/%{name}-target-artik10%{_hal_sysconfdir}/murphy/*
-%{_hal_datadir}/%{name}-target-artik10%{_hal_sysconfdir}/multimedia/*.ini
-%{_hal_datadir}/%{name}-target-artik10%{_hal_sysconfdir}/multimedia/*.conf
-%{_hal_datadir}/%{name}-target-artik10%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.conf
-%{_hal_datadir}/%{name}-target-artik10%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.common
-%{_hal_datadir}/%{name}-target-artik10%{_hal_datadir}/pulseaudio/alsa-mixer/profile-sets/*.conf
-
 %files target-rpi3
 %manifest %{name}-target-rpi3.manifest
 %{_hal_licensedir}/%{name}-target-rpi3/*
@@ -273,20 +224,6 @@ rm -rf %{_hal_datadir}/%{name}-simulator
 %{_hal_datadir}/%{name}-target-tw3%{_hal_datadir}/pulseaudio/alsa-mixer/profile-sets/*.conf
 %{_hal_datadir}/%{name}-target-tw3%{_hal_prefix}/lib/udev/rules.d/*
 
-%files target-rpi3-spk
-%manifest %{name}-target-rpi3-spk.manifest
-%{_hal_licensedir}/%{name}-target-rpi3-spk/*
-%defattr(-,root,root,-)
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_sysconfdir}/asound.conf
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_sysconfdir}/pulse/*
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_sysconfdir}/murphy/*
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_sysconfdir}/multimedia/*.ini
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_sysconfdir}/multimedia/*.conf
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_sysconfdir}/xdg/gstomx.conf
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.conf
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_datadir}/pulseaudio/alsa-mixer/paths/*.common
-%{_hal_datadir}/%{name}-target-rpi3-spk%{_hal_datadir}/pulseaudio/alsa-mixer/profile-sets/*.conf
-
 %files target-c4
 %manifest %{name}-target-c4.manifest
 %{_hal_licensedir}/%{name}-target-c4/*