diff options
Diffstat (limited to 'unittest')
24 files changed, 715 insertions, 0 deletions
diff --git a/unittest/CMakeLists.txt b/unittest/CMakeLists.txt new file mode 100755 index 0000000..70b0d3d --- /dev/null +++ b/unittest/CMakeLists.txt @@ -0,0 +1,52 @@ +# Copyright (c) 2014-2017 Samsung Electronics Co., Ltd All Rights Reserved +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# @file CMakeLists.txt +# @author +# @author +# @brief Cmake for tests +# + +LINK_DIRECTORIES(${CMAKE_BINARY_DIR}) +INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/src) +INCLUDE_DIRECTORIES(${CMAKE_SOURCE_DIR}/src/lib) + +SET(TARGET_GTEST_TESTS "gtest-docker-adaptor") + +FILE(GLOB TARGET_GTEST_TESTS_SRCS + *.cpp + ${CMAKE_SOURCE_DIR}/src/adaptor_setting.c + ${CMAKE_SOURCE_DIR}/src/input_file.c + ${CMAKE_SOURCE_DIR}/src/parse_file.c + ${CMAKE_SOURCE_DIR}/src/setup_system.c + ${CMAKE_SOURCE_DIR}/src/adaptor_util.c) + +INCLUDE(FindPkgConfig) + +IF(NONE_GBS_BUILD) + INCLUDE_DIRECTORIES(${LINK_LIB_INCLUDE}) + SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${EXTRA_CFLAGS} -fprofile-arcs -ftest-coverage") + set(CMAKE_EXE_LINKER_FLAGS ${LINK_FLAG}) +ELSE(NONE_GBS_BUILD) + pkg_check_modules(gtest_pkgs REQUIRED dlog json-c gmock) +ENDIF(NONE_GBS_BUILD) + +INCLUDE_DIRECTORIES(${gtest_pkgs_INCLUDE_DIRS}) +LINK_DIRECTORIES(${gtest_pkgs_LIBRARY_DIRS}) + +ADD_EXECUTABLE(${TARGET_GTEST_TESTS} ${TARGET_GTEST_TESTS_SRCS}) + +TARGET_LINK_LIBRARIES(${TARGET_GTEST_TESTS} ${gtest_pkgs_LIBRARIES} gmock json-c pthread gcov --coverage) + +INSTALL(TARGETS ${TARGET_GTEST_TESTS} DESTINATION ${BIN_INSTALL_DIR}) diff --git a/unittest/beluga-adaptor_interface.cpp b/unittest/beluga-adaptor_interface.cpp new file mode 100755 index 0000000..58c25fc --- /dev/null +++ b/unittest/beluga-adaptor_interface.cpp @@ -0,0 +1,135 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <gtest/gtest.h> +#include <unistd.h> + +#include <sys/stat.h> +#include <sys/types.h> + +#include "sa_common.h" +#include "setup_system.h" +#include "adaptor_interface.h" + +using ::testing::InitGoogleTest; + +TEST(beluga_adaptor_interface, beluga_adaptor_sa_get_os_info){ + int ret = 0; + os_info_s *os_info_h = NULL; + char *buf = NULL; + + _D("[UNIT_TEST] call sa_get_os_info~~~~~"); + os_info_h = (os_info_s *)malloc(sizeof(os_info_s)); + if (os_info_h != NULL) { + memset(os_info_h, 0x0, sizeof(os_info_s)); + ret = sa_get_os_info(os_info_h); + if (ret != -1) { + // make json string + buf = sa_create_os_info_json_string(os_info_h); + //_D("json_str : %s", buf); + if (buf != NULL){ + free(buf); + } + _D("[UNIT_TEST] os_info platformVer = %s",os_info_h->platformVer); + _D("[UNIT_TEST] os_info baseOS version = %s",os_info_h->baseOSVer); + _D("[UNIT_TEST] os_info docker version = %s",os_info_h->dockerVer); + } + if(os_info_h->platformVer) + free(os_info_h->platformVer); + if(os_info_h->baseOSVer) + free(os_info_h->baseOSVer); + if(os_info_h->dockerVer) + free(os_info_h->dockerVer); + free(os_info_h); + } + _D("[UNIT_TEST] os_info returned(%d) !!!!", ret); + EXPECT_EQ(0, ret); +} + +TEST(beluga_adaptor_interface, beluga_adaptor_sa_get_disk_info){ + int ret = 0; + disk_info_s *disk_info_h = NULL; + char *buf = NULL; + int index = 0; + + _D("[UNIT_TEST] call sa_get_disk_info~~~~~"); + disk_info_h = (disk_info_s *)malloc(sizeof(disk_info_s)); + if (disk_info_h != NULL) { + memset(disk_info_h, 0x0, sizeof(disk_info_s)); + ret = sa_get_disk_info(disk_info_h); + if (ret != -1) { + // make json string + buf = sa_create_disk_info_json_string(disk_info_h); + //_D("json_str : %s", buf); + if (buf != NULL) { + free(buf); + } + for (index = 0; index < disk_info_h->count; index++) { + _D("disk_info[%d] path = %s", index, disk_info_h->disk[index].path); + _D("disk_info[%d] free = %dM", index, disk_info_h->disk[index].free); + _D("disk_info[%d] total = %dM", index, disk_info_h->disk[index].total); + _D("disk_info[%d] used = %dM", index, disk_info_h->disk[index].used); + _D("disk_info[%d] usedpercent = %.2f%%", index, (float)disk_info_h->disk[index].usedpercent/(float)100); + } + } + + for (index = 0; index < disk_info_h->count; index++) { + if(disk_info_h->disk[index].path) + free(disk_info_h->disk[index].path); + } + free(disk_info_h); + } + _D("[UNIT_TEST] os_info returned(%d) !!!!", ret); + EXPECT_EQ(0, ret); +} + +TEST(beluga_adaptor_interface, beluga_adaptor_sa_create_device_reboot_json_string){ + char *buf = NULL; + int ret = 0; + + _D("[UNIT_TEST] sa_create_device_reboot_json_string()"); + buf = sa_create_device_reboot_json_string(ret); + + EXPECT_STRNE(NULL, buf); + + if (buf != NULL) + { + free(buf); + } +} + +/* +TEST(beluga_adaptor_interface, beluga_adaptor_sa_factory_restore){ + int ret = 0; + char *buf = NULL; + int buf_len = 0; + int fdevice_restart = 0; + + _D("[UNIT_TEST] call sa_factory_restore~~~~~"); + ret = sa_factory_restore(fdevice_restart); + + buf = sa_create_factory_restore_json_string(ret); + if (buf != NULL) { + free(buf); + } + _D("[UNIT_TEST] os_info returned(%d) !!!!", ret); + EXPECT_EQ(0, ret); +} + +TEST(beluga_adaptor_interface, beluga_adaptor_api_main_thread){ + + pthread_t t_api; + int ret = 0; + + _D("[UNIT_TEST] pthread_create >>> API_MAIN !!!"); + ret = pthread_create(&t_api, NULL, &api_main_thread, (void *)NULL); + if (ret < 0) { + _E("[UNIT_TEST][API_MAIN] thread create error (ret=%d)", ret); + ret = -1; + } + sleep(5); + pthread_cancel(t_api); + + EXPECT_EQ(0, ret); +} +*/
\ No newline at end of file diff --git a/unittest/beluga-adaptor_main.cpp b/unittest/beluga-adaptor_main.cpp new file mode 100755 index 0000000..b74dff5 --- /dev/null +++ b/unittest/beluga-adaptor_main.cpp @@ -0,0 +1,13 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +//#include <gmock/gmock.h> +#include <gtest/gtest.h> +#include <unistd.h> + +using ::testing::InitGoogleTest; + +int main(int argc, char **argv){ + InitGoogleTest(&argc, argv); + return RUN_ALL_TESTS(); +} diff --git a/unittest/beluga-adaptor_setting.cpp b/unittest/beluga-adaptor_setting.cpp new file mode 100755 index 0000000..083d39a --- /dev/null +++ b/unittest/beluga-adaptor_setting.cpp @@ -0,0 +1,145 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <gtest/gtest.h> +#include <unistd.h> + +#include <sys/stat.h> +#include <sys/types.h> +#include <pthread.h> + +#include "sa_common.h" +#include "adaptor_api.h" +#include "adaptor_setting.h" +#include "setup_system.h" +#include "adaptor_util.h" +#include "parse_file.h" +#include "json_util.h" + + +using ::testing::InitGoogleTest; + +TEST(beluga_adaptor_setting, beluga_adaptor_setup_user_certificates){ + int ret = 0; + + _D("[UNIT_TEST] setup_user_certificates ~~~~~"); + + setup_user_certificates(); + + EXPECT_EQ(0, ret); +} + +TEST(beluga_adaptor_setting, beluga_adaptor_sa_split_files){ + sa_error_e ret = SA_ERROR_NONE; + char *orig_config_file = "/opt/beluga/setup-adaptor/config/config.json"; + char sa_config_file_path[2][256] = { + "/opt/beluga/setup-adaptor/config/devconfig_system.json" + "/opt/beluga/setup-adaptor/config/devconfig_target.json" + }; + + _D("[UNIT_TEST] sa_split_files ~~~~~"); + + sa_split_files(orig_config_file, sa_config_file_path[0], sa_config_file_path[1]); + + EXPECT_EQ(SA_ERROR_NONE, ret); +} + +TEST(beluga_adaptor_setting, beluga_adaptor_sa_inputfile_get_config_info){ + int flagInitialized = 0; + sa_error_e ret = SA_ERROR_NONE; + sa_config_s config = { 0, }; + char *file_path = "/opt/beluga/setup-adaptor/config/config.json"; + + _D("[UNIT_TEST] sa_inputfile_get_config_info ~~~~~"); + + ret = sa_inputfile_get_config_info(&config, file_path); + sa_inputfile_release_resource(&config); + + EXPECT_EQ(SA_ERROR_NONE, ret); +} + +TEST(beluga_adaptor_setting, beluga_adaptor_sa_setup_system){ + int flagInitialized = 0; + sa_error_e ret = SA_ERROR_NONE; + sa_config_s config = { 0, }; + char *file_path = "/opt/beluga/setup-adaptor/config/config.json"; + + _D("[UNIT_TEST] sa_inputfile_get_config_info ~~~~~"); + + ret = sa_inputfile_get_config_info(&config, file_path); + + if (ret == SA_ERROR_NONE) { + if (config.systemData != NULL) + { + ret = sa_setup_system(config.systemData, flagInitialized); + if (ret != SA_ERROR_NONE) + _E("sa_setup_system return error(%d)", ret); + _D("sa_setup_system() completed !!! ret(%d)", ret); + } + } + sa_inputfile_release_resource(&config); + _D("setup_cb completed <<<<<<<<<<<<<<<<<<<<<<<<"); + + EXPECT_EQ(SA_ERROR_NONE, ret); +} + +TEST(beluga_adaptor_setting, beluga_adaptor_sa_remove_config_file){ + sa_error_e ret = SA_ERROR_NONE; + + _D("[UNIT_TEST] sa_remove_config_file ~~~~~"); + + ret = sa_remove_config_file(); + + EXPECT_EQ(SA_ERROR_NONE, ret); +} + +TEST(beluga_adaptor_setting, beluga_adaptor_setting_main_thread){ + + pthread_t t_setting; + int ret = 0; + char cmd_gen_socket[128] = "sudo touch /var/run/beluga_launcher_notify.sock"; + + ret = CLI_command(cmd_gen_socket, 0, NULL); + + _D("[UNIT_TEST] pthread_create >>> SETTING_MAIN !!!"); + ret = pthread_create(&t_setting, NULL, &setting_main_thread, (void *)NULL); + if (ret < 0) { + _E("[UNIT_TEST][SETTING_MAIN] thread create error (ret=%d)", ret); + ret = -1; + } + sleep(5); + pthread_cancel(t_setting); + + EXPECT_EQ(0, ret); +} + +TEST(beluga_adaptor_setting, beluga_adaptor_setting_main_thread_compare_config_file){ + + pthread_t t_setting; + int ret = 0; + char cmd_gen_socket[128] = "sudo touch /var/run/beluga_launcher_notify.sock"; + char cmd_copy_config_file[256] = "sudo cp /opt/beluga/setup-adaptor/config/devconfig_system.json /opt/beluga/setup-adaptor/config/devconfig_system_applied.json"; + + ret = CLI_command(cmd_gen_socket, 0, NULL); + ret = CLI_command(cmd_copy_config_file, 0, NULL); + + _D("[UNIT_TEST] pthread_create >>> SETTING_MAIN !!!"); + ret = pthread_create(&t_setting, NULL, &setting_main_thread, (void *)NULL); + if (ret < 0) { + _E("[UNIT_TEST][SETTING_MAIN] thread create error (ret=%d)", ret); + ret = -1; + } + sleep(5); + pthread_cancel(t_setting); + + EXPECT_EQ(0, ret); +} + +TEST(beluga_adaptor_setting, DISABLED_beluga_adaptor_send_message_to_launcher){ + + int ret = 0; + + ret = send_message_to_launcher(SA_START_LAUNCHER_SVC); + + EXPECT_EQ(0, ret); +}
\ No newline at end of file diff --git a/unittest/pre/beluga/setup-adaptor/cert/SRnD+Web+Proxy.crt b/unittest/pre/beluga/setup-adaptor/cert/SRnD+Web+Proxy.crt new file mode 100755 index 0000000..6d02635 --- /dev/null +++ b/unittest/pre/beluga/setup-adaptor/cert/SRnD+Web+Proxy.crt @@ -0,0 +1,25 @@ +-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
\ No newline at end of file diff --git a/unittest/pre/beluga/setup-adaptor/config/config.json b/unittest/pre/beluga/setup-adaptor/config/config.json new file mode 100755 index 0000000..41bf33b --- /dev/null +++ b/unittest/pre/beluga/setup-adaptor/config/config.json @@ -0,0 +1 @@ +{"wifi":{"ssid":"iot_kt","password":"iot1234!","enabled":false,"dhcpEnabled":true,"ipAddress":"127.0.0.1","netmask":"127.0.0.1","defaultGateway":"127.0.0.1","primaryDNSServer":"127.0.0.1"},"ethernet":{"enabled":true,"dhcpEnabled":false,"ipAddress":"10.113.64.123","netmask":"255.255.255.0","defaultGateway":"10.113.64.1","primaryDnsServer":"10.32.192.11"},"httpProxy":"10.112.1.184:8080","httpsProxy":"","deviceName":"artik530","insecureRegistries":["10.113.80.72:443","52.78.68.250:5000","docker.sec.samsung.net:5000"]}
\ No newline at end of file diff --git a/unittest/pre/beluga/setup-adaptor/config/set_eth_config.sh b/unittest/pre/beluga/setup-adaptor/config/set_eth_config.sh new file mode 100755 index 0000000..c3f7778 --- /dev/null +++ b/unittest/pre/beluga/setup-adaptor/config/set_eth_config.sh @@ -0,0 +1,72 @@ +#!/bin/bash + +file="/var/lib/connman/ethernet.config" +service_name="service_home_ethernet" + + +create_file() +{ + if [ -f "$file" ] ; then + echo "remove existing file" + rm "$file" + fi + touch "$file" +} + +add_ip_address() +{ + if [ -n "$IP" ] && [ -n "$NETMASK" ] && [ -n "$GATEWAY" ]; then + ipv4="$IP"/"$NETMASK"/"$GATEWAY" + else + echo -e "\nenter [ipAddress] [netmask] [gateway]" + ipv4="" + fi + + if [ -n "$ipv4" ]; then + echo "IPv4 = ${ipv4}" >> "$file" + echo -e "SET ==>> IPv4 = ${ipv4}" + else + rm "$file" + echo -e "file write error" + exit 1 + fi +} + +add_dns_server() +{ + if [ -n "$DNS1" ] && [ -n "$DNS2" ]; then + dns_server="$DNS1","$DNS2" + elif [ -n "$DNS1" ] && [ -z "$DNS2" ]; then + dns_server="$DNS1" + else + dns_server="" + fi + + if [ -n "$dns_server" ]; then + echo "Nameservers = ${dns_server}" >> "$file" + echo "SET ==>> Nameservers = ${dns_server}" + fi +} + +#start to write config file +echo "create config file ${file}" +create_file + +echo "[${service_name}]" >> "$file" +echo "Type = ethernet" >> "$file" + +add_ip_address +add_dns_server + +#change file mode +chmod +x "$file" +echo -e "complete to write...\n" + + +#disable ethernet service +connmanctl disable ethernet + +#enable ethernet service +connmanctl enable ethernet + +cat ${file} diff --git a/unittest/pre/beluga/setup-adaptor/config/set_wifi_config.sh b/unittest/pre/beluga/setup-adaptor/config/set_wifi_config.sh new file mode 100755 index 0000000..8e3aab6 --- /dev/null +++ b/unittest/pre/beluga/setup-adaptor/config/set_wifi_config.sh @@ -0,0 +1,79 @@ +#!/bin/bash + +file="/var/lib/connman/wifi.config" +service_name="service_home_wifi" + + +create_file() +{ + if [ -f "$file" ] ; then + echo "remove existing file" + rm "$file" + fi + touch "$file" +} + +add_ssid_pw() +{ + echo "Name = ${SSID}" >> "$file" + echo "Passphrase = ${PASSWORD}" >> "$file" + + echo -e "SET ==>> Name = ${SSID}" + echo -e "SET ==>> Passphrase = ${PASSWORD}" +} + +add_ip_address() +{ + if [ -n "$IP" ] && [ -n "$NETMASK" ] && [ -n "$GATEWAY" ]; then + ipv4="$IP"/"$NETMASK"/"$GATEWAY" + elif [ -n "$DHCP" ]; then + ipv4="dhcp" + else + ipv4="" + fi + + if [ -n "$ipv4" ]; then + echo "IPv4 = ${ipv4}" >> "$file" + echo -e "SET ==>> IPv4 = ${ipv4}" + fi +} + +add_dns_server() +{ + if [ -n "$DNS1" ] && [ -n "$DNS2" ]; then + dns_server="$DNS1","$DNS2" + elif [ -n "$DNS1" ] && [ -z "$DNS2" ]; then + dns_server="$DNS1" + else + dns_server="" + fi + + if [ -n "$dns_server" ]; then + echo "Nameservers = ${dns_server}" >> "$file" + echo "SET ==>> Nameservers = ${dns_server}" + fi +} + + +#start to write config file +echo "create config file ${file}" +create_file + +echo "[${service_name}]" >> "$file" +echo "Type = wifi" >> "$file" + +add_ssid_pw +add_ip_address +add_dns_server + +#change file mode +chmod +x "$file" +echo -e "complete to write...\n" + +#disable wifi service +connmanctl disable wifi + +#enable wifi service +connmanctl enable wifi + +cat ${file} diff --git a/unittest/pre/beluga/setup-adaptor/container/config-agent.yml b/unittest/pre/beluga/setup-adaptor/container/config-agent.yml new file mode 100755 index 0000000..08a746c --- /dev/null +++ b/unittest/pre/beluga/setup-adaptor/container/config-agent.yml @@ -0,0 +1,15 @@ +## agent containers spec
+version: '2'
+services:
+ beluga-agent:
+ image: docker.sec.samsung.net:5000/beluga/armhf/beluga-agent:v0.5.3
+ ports:
+ - "9090:9090"
+ container_name: beluga-agent
+ volumes:
+ - /var/run:/var/run:ro
+ - /etc/dockzen/sc:/data/ip:rw
+ - /opt/beluga/setup-adaptor:/target:rw
+ net_mode: bridge
+ privileged: true
+ enable: true
diff --git a/unittest/pre/beluga/setup-adaptor/container/config-service.yml b/unittest/pre/beluga/setup-adaptor/container/config-service.yml new file mode 100755 index 0000000..b11129d --- /dev/null +++ b/unittest/pre/beluga/setup-adaptor/container/config-service.yml @@ -0,0 +1,14 @@ +## app containers spec
+version: '2'
+services:
+ pharos-node:
+ image: docker.sec.samsung.net:5000/edge/system-pharos-node-go/rpi_arm:latest
+ ports:
+ - "48098:48098"
+ container_name: pharos-node
+ environment:
+ - ANCHOR_ADDRESS=10.113.80.65
+ - NODE_ADDRESS=10.113.80.66
+ volumes:
+ - /opt/beluga/uc:/data/db
+ - /var/run/docker.sock:/var/run/docker.sock
diff --git a/unittest/pre/beluga/system/docker/dockerd_start.json b/unittest/pre/beluga/system/docker/dockerd_start.json new file mode 100755 index 0000000..8879151 --- /dev/null +++ b/unittest/pre/beluga/system/docker/dockerd_start.json @@ -0,0 +1,6 @@ +{ +"opt_cmd" : "-s overlay2 --data-root=/opt/beluga/var/lib/docker --userland-proxy=false -H unix:///var/run/docker.sock -H tcp://0.0.0.0:2375" +} + + + diff --git a/unittest/pre/beluga/system/env/environment b/unittest/pre/beluga/system/env/environment new file mode 100755 index 0000000..e69de29 --- /dev/null +++ b/unittest/pre/beluga/system/env/environment diff --git a/unittest/pre/beluga/system/env/factory_init.json b/unittest/pre/beluga/system/env/factory_init.json new file mode 100755 index 0000000..c27e836 --- /dev/null +++ b/unittest/pre/beluga/system/env/factory_init.json @@ -0,0 +1 @@ +{ "worked": 0 }
\ No newline at end of file diff --git a/unittest/pre/beluga/system/release/beluga-release b/unittest/pre/beluga/system/release/beluga-release new file mode 100755 index 0000000..b4d8fea --- /dev/null +++ b/unittest/pre/beluga/system/release/beluga-release @@ -0,0 +1,2 @@ +VERSION="Beluga 1.0.0" +BUILD_DATE=20180711 diff --git a/unittest/pre/beluga/system/tools/agent_config.sh b/unittest/pre/beluga/system/tools/agent_config.sh new file mode 100755 index 0000000..c449941 --- /dev/null +++ b/unittest/pre/beluga/system/tools/agent_config.sh @@ -0,0 +1,64 @@ +#! /bin/sh +#set -e + +WORK_DIR=/etc/dockzen/sc +AGENT_JSON=$WORK_DIR/dockzen_agent.json +INIT_JSON=$WORK_DIR/factory_init.json + +stop() { + echo "Stop docker service of dockzen-agent" + if [ ! -z "$(docker service ls -q)" ]; then + docker service rm $(docker service ls -q) + fi + docker system prune -f + echo "Stop dockzen-launcher.service" + systemctl status dockzen-launcher.service | grep Active + systemctl stop dockzen-launcher.service + systemctl status dockzen-launcher.service | grep Active + echo "Change symbolic link of dockzen_agent.json" + rm $AGENT_JSON + echo "Clear init flag" + rm $INIT_JSON + echo "Start dockzen-launcher.service" + systemctl start dockzen-launcher.service + echo "Done" +} + +restart() { + echo "Start dockzen-launcher.service" + systemctl start dockzen-launcher.service +} + +if [ "$1" == "noop" ]; then + echo "---------------------------------------------------" + echo " clear agent as no-operation" + echo "---------------------------------------------------" + stop + restart + echo "Cleared !!!" +elif [ "$1" == "show" ]; then + echo "---------------------------------------------------" + echo " show current agent" + echo "---------------------------------------------------" + if [ -f "$AGENT_JSON" ]; then + readlink $AGENT_JSON + else + echo "empty file ($AGENT_JSON)" + fi + echo "Completed !!!" +elif [ -f "$1" ]; then + echo "---------------------------------------------------" + echo " change agent target" + echo "---------------------------------------------------" + stop + echo "Change symbolic link of dockzen_agent.json(-->$1)" + ln -s $1 $AGENT_JSON + restart + echo "Done !!! linked to \"$(readlink $AGENT_JSON)\"" +else + echo "check input parameter" + echo "Usage 1 : ./agent_set noop (disable agent)" + echo "Usage 2 : ./agent_set show (display current agent config file)" + echo "Usage 3 : ./agent_set [json file] (set agent config file)" +fi +
\ No newline at end of file diff --git a/unittest/pre/beluga/system/tools/agent_reset.sh b/unittest/pre/beluga/system/tools/agent_reset.sh new file mode 100755 index 0000000..795b0e5 --- /dev/null +++ b/unittest/pre/beluga/system/tools/agent_reset.sh @@ -0,0 +1,31 @@ +#! /bin/bash +#set -e + +echo "Stop docker services" +if [ ! -z "$(docker service ls -q)" ]; then + docker service rm $(docker service ls -q) +fi + +echo "Remove container lists" +if [ ! -z "$(docker ps -a -q)" ]; then + docker rm $(docker ps -a -q) -f +fi + +echo "Remove image lists" +if [ ! -z "$(docker images -q)" ]; then + docker rmi $(docker images -q) -f +fi + +echo "Do prune" +docker system prune -f + +echo "Stop dockzen-launcher.service" +systemctl stop dockzen-launcher.service + +echo "Delete /var/lib/docker folder" +rm /var/lib/docker/ -rf + +echo "Clear init flag" +rm /etc/dockzen/sc/factory_init.json + +reboot -f
\ No newline at end of file diff --git a/unittest/pre/beluga/system/tools/availables-dockerd/dockerd_start-default.json b/unittest/pre/beluga/system/tools/availables-dockerd/dockerd_start-default.json new file mode 100755 index 0000000..6b7bc0d --- /dev/null +++ b/unittest/pre/beluga/system/tools/availables-dockerd/dockerd_start-default.json @@ -0,0 +1,4 @@ +{ +"opt_cmd" : "-s overlay2 --data-root=/opt/beluga/var/lib/docker --userland-proxy=false -H unix:///var/run/docker.sock -H tcp://0.0.0.0:2375" +} + diff --git a/unittest/pre/beluga/system/tools/dockerd_start.json b/unittest/pre/beluga/system/tools/dockerd_start.json Binary files differnew file mode 100755 index 0000000..8d0715e --- /dev/null +++ b/unittest/pre/beluga/system/tools/dockerd_start.json diff --git a/unittest/pre/beluga/system/tools/dockzen_agent-default.json b/unittest/pre/beluga/system/tools/dockzen_agent-default.json new file mode 100755 index 0000000..8ff75ac --- /dev/null +++ b/unittest/pre/beluga/system/tools/dockzen_agent-default.json @@ -0,0 +1,10 @@ +{ +"name" : "dockzen-agent", +"image" : "docker.sec.samsung.net:5000/dockzen/armhf/dockzen-agent:v1.8.2", +"volume" : "/var/run:/var/run:rw,/etc/dockzen/sc:/data/ip:rw", +"port" : "9090:9090", +"net_mode" : "bridge", +"privileged" : false, +"enable" : true +} + diff --git a/unittest/pre/beluga/system/tools/dockzen_agent-headed-iiot.json b/unittest/pre/beluga/system/tools/dockzen_agent-headed-iiot.json new file mode 100755 index 0000000..569b631 --- /dev/null +++ b/unittest/pre/beluga/system/tools/dockzen_agent-headed-iiot.json @@ -0,0 +1,10 @@ +{
+"name" : "dockzen-agent",
+"image" : "docker.sec.samsung.net:5000/dockzen/armhf/dockzen-agent:v1.8.0-headed-iiot",
+"volume" : "/var/run:/var/run:rw,/etc/dockzen/sc:/data/ip:rw",
+"port" : "9090:9090",
+"net_mode" : "bridge",
+"privileged" : false,
+"enable" : true
+}
+
diff --git a/unittest/pre/beluga/system/tools/dockzen_agent-headed.json b/unittest/pre/beluga/system/tools/dockzen_agent-headed.json new file mode 100755 index 0000000..56d8aee --- /dev/null +++ b/unittest/pre/beluga/system/tools/dockzen_agent-headed.json @@ -0,0 +1,10 @@ +{
+"name" : "dockzen-agent",
+"image" : "docker.sec.samsung.net:5000/dockzen/armhf/dockzen-agent:v1.8.0-headed",
+"volume" : "/var/run:/var/run:rw,/etc/dockzen/sc:/data/ip:rw",
+"port" : "9090:9090",
+"net_mode" : "bridge",
+"privileged" : false,
+"enable" : true
+}
+
diff --git a/unittest/pre/beluga/system/tools/dockzen_agent-headless-iiot.json b/unittest/pre/beluga/system/tools/dockzen_agent-headless-iiot.json new file mode 100755 index 0000000..f839c86 --- /dev/null +++ b/unittest/pre/beluga/system/tools/dockzen_agent-headless-iiot.json @@ -0,0 +1,10 @@ +{
+"name" : "dockzen-agent",
+"image" : "docker.sec.samsung.net:5000/dockzen/armhf/dockzen-agent:v1.8.0-headless-iiot",
+"volume" : "/var/run:/var/run:rw",
+"port" : "9090:9090",
+"net_mode" : "bridge",
+"privileged" : false,
+"enable" : true
+}
+
diff --git a/unittest/pre/beluga/system/tools/dockzen_agent-headless.json b/unittest/pre/beluga/system/tools/dockzen_agent-headless.json new file mode 100755 index 0000000..3179a8d --- /dev/null +++ b/unittest/pre/beluga/system/tools/dockzen_agent-headless.json @@ -0,0 +1,10 @@ +{ +"name" : "dockzen-agent", +"image" : "docker.sec.samsung.net:5000/dockzen/armhf/dockzen-agent:v1.8.0-headless", +"volume" : "/var/run:/var/run:rw", +"port" : "9090:9090", +"net_mode" : "bridge", +"privileged" : false, +"enable" : true +} + diff --git a/unittest/pre/test_condition.sh b/unittest/pre/test_condition.sh new file mode 100755 index 0000000..362c093 --- /dev/null +++ b/unittest/pre/test_condition.sh @@ -0,0 +1,6 @@ +#!/bin/bash + +set -e + +echo "copy beluga working files" +sudo cp -rf ./unittest/pre/beluga/ /opt/
\ No newline at end of file |