blob: 7b8a3aa2b66e97ef67b421f348e5b846aa66fac9 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
## How to use XU4 with Ubuntu 16.04
Ref: https://wiki.odroid.com/odroid-xu4/odroid-xu4
eMMC card pre-installed Ubuntu 16.04
Preparation for IO via serial cable
- Refer to `minicom` section in xu4_tizen.md
- To find the name of serial device, plug your odroid into your host machine and power it on. Then, run the following on your host:
```
$ dmesg | grep tty
[ 0.000000] console [tty0] enabled
[322282.017985] usb 2-1: cp210x converter now attached to ttyUSB0
```
- Use `CTRL-a z o` > `Serial port setup` to enter the dialog
- Set configuration `Serial Device` to `/dev/ttyUSB0` for the name of serial device
- Baud should be `115200-8N1`
- Set configuration `Hardware Flow Control` to `No` to enable communication(keyboard typing..)
Connect
- Connect eMMC to bottom of the board
- Connect Serial Console to Host USB
- Connect power and boot
Login with serial console. you can login with `root` or default `odroid` account
- `root` password: `odroid`
- `odroid `password: `odroid`
Set ethernet
`/etc/network/interfaces`
```
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 10.113.xxx.yyy
netmask 255.255.255.0
network 10.113.xxx.0
broadcast 10.113.xxx.255
gateway 10.113.xxx.1
dns-nameservers 10.32.192.11 10.32.193.11 8.8.8.8
```
Change `xxx.yyy` to your IP address.
Reboot and login with SSH
### Add proxy settings
Add `/etc/apt/apt.conf.d/90proxies`
```
Acquire::http::proxy "http://10.112.1.184:8080/";
Acquire::https::proxy "http://10.112.1.184:8080/";
Acquire::ftp::proxy "ftp://10.112.1.184:8080/";
```
Add `/etc/profile.d/proxy.sh`
```
#!/bin/bash
# Proxy
export HTTP_PROXY=http://10.112.1.184:8080/
export HTTPS_PROXY=https://10.112.1.184:8080/
```
### Update and install programs
```
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install vim nfs-common
```
### MALI GPU driver
Driver files are pre-installed in eMMC as follows
```
odroid@odroid:/usr/lib/arm-linux-gnueabihf/mali-egl$ ll
total 20136
drwxr-xr-x 2 root root 4096 Aug 20 2017 ./
drwxr-xr-x 106 root root 90112 Mar 26 08:32 ../
-rw-r--r-- 1 root root 38 Apr 30 2017 ld.so.conf
-rwxr-xr-x 1 root root 2752 Apr 30 2017 libEGL.so*
lrwxrwxrwx 1 root root 9 Apr 30 2017 libEGL.so.1 -> libEGL.so*
lrwxrwxrwx 1 root root 9 Apr 30 2017 libEGL.so.1.4 -> libEGL.so*
-rwxr-xr-x 1 root root 2752 Apr 30 2017 libGLESv1_CM.so*
lrwxrwxrwx 1 root root 15 Apr 30 2017 libGLESv1_CM.so.1 -> libGLESv1_CM.so*
lrwxrwxrwx 1 root root 15 Apr 30 2017 libGLESv1_CM.so.1.1 -> libGLESv1_CM.so*
-rwxr-xr-x 1 root root 2752 Apr 30 2017 libGLESv2.so*
lrwxrwxrwx 1 root root 12 Apr 30 2017 libGLESv2.so.2 -> libGLESv2.so*
lrwxrwxrwx 1 root root 12 Apr 30 2017 libGLESv2.so.2.0 -> libGLESv2.so*
-rwxr-xr-x 1 root root 20493444 May 8 2017 libmali.so*
-rwxr-xr-x 1 root root 2752 Apr 30 2017 libOpenCL.so*
lrwxrwxrwx 1 root root 12 Apr 30 2017 libOpenCL.so.1 -> libOpenCL.so*
lrwxrwxrwx 1 root root 12 Apr 30 2017 libOpenCL.so.1.1 -> libOpenCL.so*
```
|
