From f5660c6460a863b19f9ef745575780e37cc192a9 Mon Sep 17 00:00:00 2001 From: Kibum Kim Date: Sat, 7 Jan 2012 00:46:38 +0900 Subject: Git init --- mpi/hppa/README | 84 ++++++++++++++ mpi/hppa/distfiles | 7 ++ mpi/hppa/mpih-add1.S | 73 ++++++++++++ mpi/hppa/mpih-lshift.S | 78 +++++++++++++ mpi/hppa/mpih-rshift.S | 74 ++++++++++++ mpi/hppa/mpih-sub1.S | 81 ++++++++++++++ mpi/hppa/udiv-qrnnd.S | 299 +++++++++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 696 insertions(+) create mode 100644 mpi/hppa/README create mode 100644 mpi/hppa/distfiles create mode 100644 mpi/hppa/mpih-add1.S create mode 100644 mpi/hppa/mpih-lshift.S create mode 100644 mpi/hppa/mpih-rshift.S create mode 100644 mpi/hppa/mpih-sub1.S create mode 100644 mpi/hppa/udiv-qrnnd.S (limited to 'mpi/hppa') diff --git a/mpi/hppa/README b/mpi/hppa/README new file mode 100644 index 0000000..5a2d5fd --- /dev/null +++ b/mpi/hppa/README @@ -0,0 +1,84 @@ +This directory contains mpn functions for various HP PA-RISC chips. Code +that runs faster on the PA7100 and later implementations, is in the pa7100 +directory. + +RELEVANT OPTIMIZATION ISSUES + + Load and Store timing + +On the PA7000 no memory instructions can issue the two cycles after a store. +For the PA7100, this is reduced to one cycle. + +The PA7100 has a lookup-free cache, so it helps to schedule loads and the +dependent instruction really far from each other. + +STATUS + +1. mpn_mul_1 could be improved to 6.5 cycles/limb on the PA7100, using the + instructions bwlow (but some sw pipelining is needed to avoid the + xmpyu-fstds delay): + + fldds s1_ptr + + xmpyu + fstds N(%r30) + xmpyu + fstds N(%r30) + + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + + addc + stws res_ptr + addc + stws res_ptr + + addib Loop + +2. mpn_addmul_1 could be improved from the current 10 to 7.5 cycles/limb + (asymptotically) on the PA7100, using the instructions below. With proper + sw pipelining and the unrolling level below, the speed becomes 8 + cycles/limb. + + fldds s1_ptr + fldds s1_ptr + + xmpyu + fstds N(%r30) + xmpyu + fstds N(%r30) + xmpyu + fstds N(%r30) + xmpyu + fstds N(%r30) + + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + ldws N(%r30) + addc + addc + addc + addc + addc %r0,%r0,cy-limb + + ldws res_ptr + ldws res_ptr + ldws res_ptr + ldws res_ptr + add + stws res_ptr + addc + stws res_ptr + addc + stws res_ptr + addc + stws res_ptr + + addib diff --git a/mpi/hppa/distfiles b/mpi/hppa/distfiles new file mode 100644 index 0000000..7f24205 --- /dev/null +++ b/mpi/hppa/distfiles @@ -0,0 +1,7 @@ +README +udiv-qrnnd.S +mpih-add1.S +mpih-sub1.S +mpih-lshift.S +mpih-rshift.S + diff --git a/mpi/hppa/mpih-add1.S b/mpi/hppa/mpih-add1.S new file mode 100644 index 0000000..fbe93ed --- /dev/null +++ b/mpi/hppa/mpih-add1.S @@ -0,0 +1,73 @@ +/* hppa add_n -- Add two limb vectors of the same length > 0 and store + * sum in a third limb vector. + * + * Copyright (C) 1992, 1994, 1998, + * 2001 Fee Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + * Note: This code is heavily based on the GNU MP Library. + * Actually it's the same code with only minor changes in the + * way the data is stored; this is to support the abstraction + * of an optional secure memory allocation which may be used + * to avoid revealing of sensitive data due to paging etc. + * The GNU MP Library itself is published under the LGPL; + * however I decided to publish this code under the plain GPL. + */ + + + +/******************* + * mpi_limb_t + * mpihelp_add_n( mpi_ptr_t res_ptr, (gr26) + * mpi_ptr_t s1_ptr, (gr25) + * mpi_ptr_t s2_ptr, (gr24) + * mpi_size_t size) (gr23) + * + * One might want to unroll this as for other processors, but it turns + * out that the data cache contention after a store makes such + * unrolling useless. We can't come under 5 cycles/limb anyway. + */ + + .code + .export mpihelp_add_n + .label mpihelp_add_n + .proc + .callinfo frame=0,no_calls + .entry + + ldws,ma 4(0,%r25),%r20 + ldws,ma 4(0,%r24),%r19 + + addib,= -1,%r23,L$end ; check for (SIZE == 1) + add %r20,%r19,%r28 ; add first limbs ignoring cy + + .label L$loop + ldws,ma 4(0,%r25),%r20 + ldws,ma 4(0,%r24),%r19 + stws,ma %r28,4(0,%r26) + addib,<> -1,%r23,L$loop + addc %r20,%r19,%r28 + + .label L$end + stws %r28,0(0,%r26) + bv 0(%r2) + addc %r0,%r0,%r28 + + .exit + .procend diff --git a/mpi/hppa/mpih-lshift.S b/mpi/hppa/mpih-lshift.S new file mode 100644 index 0000000..0c4de14 --- /dev/null +++ b/mpi/hppa/mpih-lshift.S @@ -0,0 +1,78 @@ +/* hppa lshift + * + * Copyright (C) 1992, 1994, 1998 + * 2001 Free Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + + + +/******************* + * mpi_limb_t + * mpihelp_lshift( mpi_ptr_t wp, (gr26) + * mpi_ptr_t up, (gr25) + * mpi_size_t usize, (gr24) + * unsigned cnt) (gr23) + */ + + .code + .export mpihelp_lshift + .label mpihelp_lshift + .proc + .callinfo frame=64,no_calls + .entry + + sh2add %r24,%r25,%r25 + sh2add %r24,%r26,%r26 + ldws,mb -4(0,%r25),%r22 + subi 32,%r23,%r1 + mtsar %r1 + addib,= -1,%r24,L$0004 + vshd %r0,%r22,%r28 ; compute carry out limb + ldws,mb -4(0,%r25),%r29 + addib,= -1,%r24,L$0002 + vshd %r22,%r29,%r20 + + .label L$loop + ldws,mb -4(0,%r25),%r22 + stws,mb %r20,-4(0,%r26) + addib,= -1,%r24,L$0003 + vshd %r29,%r22,%r20 + ldws,mb -4(0,%r25),%r29 + stws,mb %r20,-4(0,%r26) + addib,<> -1,%r24,L$loop + vshd %r22,%r29,%r20 + + .label L$0002 + stws,mb %r20,-4(0,%r26) + vshd %r29,%r0,%r20 + bv 0(%r2) + stw %r20,-4(0,%r26) + .label L$0003 + stws,mb %r20,-4(0,%r26) + .label L$0004 + vshd %r22,%r0,%r20 + bv 0(%r2) + stw %r20,-4(0,%r26) + + .exit + .procend + + + diff --git a/mpi/hppa/mpih-rshift.S b/mpi/hppa/mpih-rshift.S new file mode 100644 index 0000000..d7e691b --- /dev/null +++ b/mpi/hppa/mpih-rshift.S @@ -0,0 +1,74 @@ +/* hppa rshift + * + * Copyright (C) 1992, 1994, 1998, + * 2001 Free Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + */ + + + + +/******************* + * mpi_limb_t + * mpihelp_rshift( mpi_ptr_t wp, (gr26) + * mpi_ptr_t up, (gr25) + * mpi_size_t usize, (gr24) + * unsigned cnt) (gr23) + */ + + .code + .export mpihelp_rshift + .label mpihelp_rshift + .proc + .callinfo frame=64,no_calls + .entry + + ldws,ma 4(0,%r25),%r22 + mtsar %r23 + addib,= -1,%r24,L$r004 + vshd %r22,%r0,%r28 ; compute carry out limb + ldws,ma 4(0,%r25),%r29 + addib,= -1,%r24,L$r002 + vshd %r29,%r22,%r20 + + .label L$roop + ldws,ma 4(0,%r25),%r22 + stws,ma %r20,4(0,%r26) + addib,= -1,%r24,L$r003 + vshd %r22,%r29,%r20 + ldws,ma 4(0,%r25),%r29 + stws,ma %r20,4(0,%r26) + addib,<> -1,%r24,L$roop + vshd %r29,%r22,%r20 + + .label L$r002 + stws,ma %r20,4(0,%r26) + vshd %r0,%r29,%r20 + bv 0(%r2) + stw %r20,0(0,%r26) + .label L$r003 + stws,ma %r20,4(0,%r26) + .label L$r004 + vshd %r0,%r22,%r20 + bv 0(%r2) + stw %r20,0(0,%r26) + + .exit + .procend + diff --git a/mpi/hppa/mpih-sub1.S b/mpi/hppa/mpih-sub1.S new file mode 100644 index 0000000..c1e20d5 --- /dev/null +++ b/mpi/hppa/mpih-sub1.S @@ -0,0 +1,81 @@ +/* hppa sub_n -- Sub two limb vectors of the same length > 0 and store + * sum in a third limb vector. + * + * Copyright (C) 1992, 1994, 1998, + * 2001 Free Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + * Note: This code is heavily based on the GNU MP Library. + * Actually it's the same code with only minor changes in the + * way the data is stored; this is to support the abstraction + * of an optional secure memory allocation which may be used + * to avoid revealing of sensitive data due to paging etc. + * The GNU MP Library itself is published under the LGPL; + * however I decided to publish this code under the plain GPL. + */ + + +#include "sysdep.h" +#include "asm-syntax.h" + + +/******************* + * mpi_limb_t + * mpihelp_sub_n( mpi_ptr_t res_ptr, (gr26) + * mpi_ptr_t s1_ptr, (gr25) + * mpi_ptr_t s2_ptr, (gr24) + * mpi_size_t size) (gr23) + * + * One might want to unroll this as for other processors, but it turns + * out that the data cache contention after a store makes such + * unrolling useless. We can't come under 5 cycles/limb anyway. + */ + + + .code + .export mpihelp_sub_n + .label mpihelp_sub_n + .proc + .callinfo frame=0,no_calls + .entry + + ldws,ma 4(0,%r25),%r20 + ldws,ma 4(0,%r24),%r19 + + addib,= -1,%r23,L$end ; check for (SIZE == 1) + sub %r20,%r19,%r28 ; subtract first limbs ignoring cy + + .label L$loop + ldws,ma 4(0,%r25),%r20 + ldws,ma 4(0,%r24),%r19 + stws,ma %r28,4(0,%r26) + addib,<> -1,%r23,L$loop + subb %r20,%r19,%r28 + + .label L$end + stws %r28,0(0,%r26) + addc %r0,%r0,%r28 + bv 0(%r2) + subi 1,%r28,%r28 + + .exit + .procend + + + diff --git a/mpi/hppa/udiv-qrnnd.S b/mpi/hppa/udiv-qrnnd.S new file mode 100644 index 0000000..a2024ba --- /dev/null +++ b/mpi/hppa/udiv-qrnnd.S @@ -0,0 +1,299 @@ +/* HP-PA __udiv_qrnnd division support, used from longlong.h. + * This version runs fast on pre-PA7000 CPUs. + * + * Copyright (C) 1993, 1994, 1998, 2001 Free Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + * Note: This code is heavily based on the GNU MP Library. + * Actually it's the same code with only minor changes in the + * way the data is stored; this is to support the abstraction + * of an optional secure memory allocation which may be used + * to avoid revealing of sensitive data due to paging etc. + * The GNU MP Library itself is published under the LGPL; + * however I decided to publish this code under the plain GPL. + */ + + + +/* INPUT PARAMETERS + * rem_ptr gr26 + * n1 gr25 + * n0 gr24 + * d gr23 + * + * The code size is a bit excessive. We could merge the last two ds;addc + * sequences by simply moving the "bb,< Odd" instruction down. The only + * trouble is the FFFFFFFF code that would need some hacking. + */ + + .code + .export __udiv_qrnnd + .label __udiv_qrnnd + .proc + .callinfo frame=0,no_calls + .entry + + comb,< %r23,0,L$largedivisor + sub %r0,%r23,%r1 ; clear cy as side-effect + ds %r0,%r1,%r0 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r24 + ds %r25,%r23,%r25 + addc %r24,%r24,%r28 + ds %r25,%r23,%r25 + comclr,>= %r25,%r0,%r0 + addl %r25,%r23,%r25 + stws %r25,0(0,%r26) + bv 0(%r2) + addc %r28,%r28,%r28 + + .label L$largedivisor + extru %r24,31,1,%r19 ; r19 = n0 & 1 + bb,< %r23,31,L$odd + extru %r23,30,31,%r22 ; r22 = d >> 1 + shd %r25,%r24,1,%r24 ; r24 = new n0 + extru %r25,30,31,%r25 ; r25 = new n1 + sub %r0,%r22,%r21 + ds %r0,%r21,%r0 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + comclr,>= %r25,%r0,%r0 + addl %r25,%r22,%r25 + sh1addl %r25,%r19,%r25 + stws %r25,0(0,%r26) + bv 0(%r2) + addc %r24,%r24,%r28 + + .label L$odd + addib,sv,n 1,%r22,L$FF.. ; r22 = (d / 2 + 1) + shd %r25,%r24,1,%r24 ; r24 = new n0 + extru %r25,30,31,%r25 ; r25 = new n1 + sub %r0,%r22,%r21 + ds %r0,%r21,%r0 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r24 + ds %r25,%r22,%r25 + addc %r24,%r24,%r28 + comclr,>= %r25,%r0,%r0 + addl %r25,%r22,%r25 + sh1addl %r25,%r19,%r25 +; We have computed (n1,,n0) / (d + 1), q' = r28, r' = r25 + add,nuv %r28,%r25,%r25 + addl %r25,%r1,%r25 + addc %r0,%r28,%r28 + sub,<< %r25,%r23,%r0 + addl %r25,%r1,%r25 + stws %r25,0(0,%r26) + bv 0(%r2) + addc %r0,%r28,%r28 + +; This is just a special case of the code above. +; We come here when d == 0xFFFFFFFF + .label L$FF.. + add,uv %r25,%r24,%r24 + sub,<< %r24,%r23,%r0 + ldo 1(%r24),%r24 + stws %r24,0(0,%r26) + bv 0(%r2) + addc %r0,%r25,%r28 + + .exit + .procend -- cgit v1.2.3