diff options
Diffstat (limited to 'common/gst-autogen.sh')
| -rw-r--r-- | common/gst-autogen.sh | 376 |
1 files changed, 376 insertions, 0 deletions
diff --git a/common/gst-autogen.sh b/common/gst-autogen.sh new file mode 100644 index 0000000..f05e021 --- /dev/null +++ b/common/gst-autogen.sh @@ -0,0 +1,376 @@ +# a silly hack that generates autoregen.sh but it's handy +# Remove the old autoregen.sh first to create a new file, +# as the current one may be being read by the shell executing +# this script. +if [ -f "autoregen.sh" ]; then + rm autoregen.sh +fi +echo "#!/bin/sh" > autoregen.sh +echo "./autogen.sh $@ \$@" >> autoregen.sh +chmod +x autoregen.sh + +# helper functions for autogen.sh + +debug () +# print out a debug message if DEBUG is a defined variable +{ + if test ! -z "$DEBUG" + then + echo "DEBUG: $1" + fi +} + +version_get () +# based on the command's version output, set variables +# _MAJOR, _MINOR, _MICRO, _VERSION, using the given prefix as variable prefix +# +# arg 1: command binary name +# arg 2: (uppercased) variable name prefix +{ + COMMAND=$1 + VARPREFIX=`echo $2 | tr .,- _` + + # strip everything that's not a digit, then use cut to get the first field + pkg_version=`$COMMAND --version|head -n 1|sed 's/^.*)[^0-9]*//'|cut -d' ' -f1` + debug "pkg_version $pkg_version" + # remove any non-digit characters from the version numbers to permit numeric + # comparison + pkg_major=`echo $pkg_version | cut -d. -f1 | sed s/[a-zA-Z\-].*//g` + pkg_minor=`echo $pkg_version | cut -d. -f2 | sed s/[a-zA-Z\-].*//g` + pkg_micro=`echo $pkg_version | cut -d. -f3 | sed s/[a-zA-Z\-].*//g` + test -z "$pkg_major" && pkg_major=0 + test -z "$pkg_minor" && pkg_minor=0 + test -z "$pkg_micro" && pkg_micro=0 + debug "found major $pkg_major minor $pkg_minor micro $pkg_micro" + eval ${VARPREFIX}_MAJOR=$pkg_major + eval ${VARPREFIX}_MINOR=$pkg_minor + eval ${VARPREFIX}_MICRO=$pkg_micro + eval ${VARPREFIX}_VERSION=$pkg_version +} + +version_compare () +# Checks whether the version of VARPREFIX is equal to or +# newer than the requested version +# arg1: VARPREFIX +# arg2: MAJOR +# arg3: MINOR +# arg4: MICRO +{ + VARPREFIX=`echo $1 | tr .,- _` + MAJOR=$2 + MINOR=$3 + MICRO=$4 + + eval pkg_major=\$${VARPREFIX}_MAJOR; + eval pkg_minor=\$${VARPREFIX}_MINOR; + eval pkg_micro=\$${VARPREFIX}_MICRO; + + #start checking the version + debug "version_compare: $VARPREFIX against $MAJOR.$MINOR.$MICRO" + + # reset check + WRONG= + + if [ ! "$pkg_major" -gt "$MAJOR" ]; then + debug "major: $pkg_major <= $MAJOR" + if [ "$pkg_major" -lt "$MAJOR" ]; then + debug "major: $pkg_major < $MAJOR" + WRONG=1 + elif [ ! "$pkg_minor" -gt "$MINOR" ]; then + debug "minor: $pkg_minor <= $MINOR" + if [ "$pkg_minor" -lt "$MINOR" ]; then + debug "minor: $pkg_minor < $MINOR" + WRONG=1 + elif [ "$pkg_micro" -lt "$MICRO" ]; then + debug "micro: $pkg_micro < $MICRO" + WRONG=1 + fi + fi + fi + if test ! -z "$WRONG"; then + debug "version_compare: $VARPREFIX older than $MAJOR.$MINOR.$MICRO" + return 1 + fi + debug "version_compare: $VARPREFIX equal to/newer than $MAJOR.$MINOR.$MICRO" + return 0 +} + + +version_check () +# check the version of a package +# first argument : package name (executable) +# second argument : optional path where to look for it instead +# third argument : source download url +# rest of arguments : major, minor, micro version +# all consecutive ones : suggestions for binaries to use +# (if not specified in second argument) +{ + PACKAGE=$1 + PKG_PATH=$2 + URL=$3 + MAJOR=$4 + MINOR=$5 + MICRO=$6 + + # for backwards compatibility, we let PKG_PATH=PACKAGE when PKG_PATH null + if test -z "$PKG_PATH"; then PKG_PATH=$PACKAGE; fi + debug "major $MAJOR minor $MINOR micro $MICRO" + VERSION=$MAJOR + if test ! -z "$MINOR"; then VERSION=$VERSION.$MINOR; else MINOR=0; fi + if test ! -z "$MICRO"; then VERSION=$VERSION.$MICRO; else MICRO=0; fi + + debug "major $MAJOR minor $MINOR micro $MICRO" + + for SUGGESTION in $PKG_PATH; do + COMMAND="$SUGGESTION" + + # don't check if asked not to + test -z "$NOCHECK" && { + printf " checking for $COMMAND >= $VERSION ... " + } || { + # we set a var with the same name as the package, but stripped of + # unwanted chars + VAR=`echo $PACKAGE | sed 's/-//g'` + debug "setting $VAR" + eval $VAR="$COMMAND" + return 0 + } + + which $COMMAND > /dev/null 2>&1 + if test $? -eq 1; + then + debug "$COMMAND not found" + continue + fi + + VARPREFIX=`echo $COMMAND | sed 's/-//g' | tr [:lower:] [:upper:]` + version_get $COMMAND $VARPREFIX + + version_compare $VARPREFIX $MAJOR $MINOR $MICRO + if test $? -ne 0; then + echo "found $pkg_version, not ok !" + continue + else + echo "found $pkg_version, ok." + # we set a var with the same name as the package, but stripped of + # unwanted chars + VAR=`echo $PACKAGE | sed 's/-//g'` + debug "setting $VAR" + eval $VAR="$COMMAND" + return 0 + fi + done + + echo "$PACKAGE not found !" + echo "You must have $PACKAGE installed to compile $package." + echo "Download the appropriate package for your distribution," + echo "or get the source tarball at $URL" + return 1; +} + +aclocal_check () +{ + # normally aclocal is part of automake + # so we expect it to be in the same place as automake + # so if a different automake is supplied, we need to adapt as well + # so how's about replacing automake with aclocal in the set var, + # and saving that in $aclocal ? + # note, this will fail if the actual automake isn't called automake* + # or if part of the path before it contains it + if [ -z "$automake" ]; then + echo "Error: no automake variable set !" + return 1 + else + aclocal=`echo $automake | sed s/automake/aclocal/` + debug "aclocal: $aclocal" + if [ "$aclocal" != "aclocal" ]; + then + CONFIGURE_DEF_OPT="$CONFIGURE_DEF_OPT --with-aclocal=$aclocal" + fi + if [ ! -x `which $aclocal` ]; then + echo "Error: cannot execute $aclocal !" + return 1 + fi + fi +} + +autoheader_check () +{ + # same here - autoheader is part of autoconf + # use the same voodoo + if [ -z "$autoconf" ]; then + echo "Error: no autoconf variable set !" + return 1 + else + autoheader=`echo $autoconf | sed s/autoconf/autoheader/` + debug "autoheader: $autoheader" + if [ "$autoheader" != "autoheader" ]; + then + CONFIGURE_DEF_OPT="$CONFIGURE_DEF_OPT --with-autoheader=$autoheader" + fi + if [ ! -x `which $autoheader` ]; then + echo "Error: cannot execute $autoheader !" + return 1 + fi + fi + +} + +autoconf_2_52d_check () +{ + # autoconf 2.52d has a weird issue involving a yes:no error + # so don't allow it's use + test -z "$NOCHECK" && { + ac_version=`$autoconf --version|head -n 1|sed 's/^[a-zA-Z\.\ ()]*//;s/ .*$//'` + if test "$ac_version" = "2.52d"; then + echo "autoconf 2.52d has an issue with our current build." + echo "We don't know who's to blame however. So until we do, get a" + echo "regular version. RPM's of a working version are on the gstreamer site." + exit 1 + fi + } + return 0 +} +libtool_2_2_gettext_check () +{ + # libtool 2.2 needs autopoint 0.17 or higher + version_compare LIBTOOLIZE 2 2 0 + if test $? -eq 0 + then + version_compare AUTOPOINT 0 17 0 + if test $? -ne 0 + then + echo "libtool 2.2 requires autopoint 0.17 or higher" + return 1 + fi + fi + return 0 +} + + +die_check () +{ + # call with $DIE + # if set to 1, we need to print something helpful then die + DIE=$1 + if test "x$DIE" = "x1"; + then + echo + echo "- Please get the right tools before proceeding." + echo "- Alternatively, if you're sure we're wrong, run with --nocheck." + exit 1 + fi +} + +autogen_options () +{ + if test "x$1" = "x"; then + return 0 + fi + + while test "x$1" != "x" ; do + optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + case "$1" in + --noconfigure) + NOCONFIGURE=defined + AUTOGEN_EXT_OPT="$AUTOGEN_EXT_OPT --noconfigure" + echo "+ configure run disabled" + shift + ;; + --nocheck) + AUTOGEN_EXT_OPT="$AUTOGEN_EXT_OPT --nocheck" + NOCHECK=defined + echo "+ autotools version check disabled" + shift + ;; + -d|--debug) + DEBUG=defined + AUTOGEN_EXT_OPT="$AUTOGEN_EXT_OPT --debug" + echo "+ debug output enabled" + shift + ;; + -h|--help) + echo "autogen.sh (autogen options) -- (configure options)" + echo "autogen.sh help options: " + echo " --noconfigure don't run the configure script" + echo " --nocheck don't do version checks" + echo " --debug debug the autogen process" + echo + echo " --with-autoconf PATH use autoconf in PATH" + echo " --with-automake PATH use automake in PATH" + echo + echo "Any argument either not in the above list or after a '--' will be " + echo "passed to ./configure." + exit 1 + ;; + --with-automake=*) + AUTOMAKE=$optarg + echo "+ using alternate automake in $optarg" + CONFIGURE_DEF_OPT="$CONFIGURE_DEF_OPT --with-automake=$AUTOMAKE" + shift + ;; + --with-autoconf=*) + AUTOCONF=$optarg + echo "+ using alternate autoconf in $optarg" + CONFIGURE_DEF_OPT="$CONFIGURE_DEF_OPT --with-autoconf=$AUTOCONF" + shift + ;; + --) shift ; break ;; + *) + echo "+ passing argument $1 to configure" + CONFIGURE_EXT_OPT="$CONFIGURE_EXT_OPT $1" + shift + ;; + esac + done + + for arg do CONFIGURE_EXT_OPT="$CONFIGURE_EXT_OPT $arg"; done + if test ! -z "$CONFIGURE_EXT_OPT" + then + echo "+ options passed to configure: $CONFIGURE_EXT_OPT" + fi +} + +toplevel_check () +{ + srcfile=$1 + test -f $srcfile || { + echo "You must run this script in the top-level $package directory" + exit 1 + } +} + +tool_run () +{ + tool=$1 + options=$2 + run_if_fail=$3 + echo "+ running $tool $options..." + $tool $options || { + echo + echo $tool failed + eval $run_if_fail + exit 1 + } +} + +install_git_hooks () +{ + if test -d .git; then + # install pre-commit hook for doing clean commits + for hook in pre-commit; do + if test ! \( -x .git/hooks/$hook -a -L .git/hooks/$hook \); then + echo "+ Installing git $hook hook" + rm -f .git/hooks/$hook + ln -s ../../common/hooks/$hook.hook .git/hooks/$hook || { + # if we couldn't create a symbolic link, try doing a plain cp + if cp common/hooks/pre-commit.hook .git/hooks/pre-commit; then + chmod +x .git/hooks/pre-commit; + else + echo "********** Couldn't install git $hook hook **********"; + fi + } + fi + done + fi +} |