tizen 2.4 releasetizen_2.4_mobile_releasesubmit/tizen_2.4/20151028.062350accepted/tizen/2.4/mobile/20151029.042229tizen_2.4accepted/tizen_2.4_mobile

28 files changed, 928 insertions, 0 deletions

diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/AUTHORS
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..b5aebf0
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,20 @@
+Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/ChangeLog
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..8b82ade
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,291 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008 Free Software Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  6. Often, you can also type `make uninstall' to remove the installed
+     files again.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *Note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..f6c30fd
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,29 @@
+#  Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved 
+# 
+#  Permission to use, copy, modify, distribute, and sell this software and its
+#  documentation for any purpose is hereby granted without fee, provided that
+#  the above copyright notice appear in all copies and that both that
+#  copyright notice and this permission notice appear in supporting
+#  documentation, and that the name of Red Hat not be used in
+#  advertising or publicity pertaining to distribution of the software without
+#  specific, written prior permission.  Red Hat makes no
+#  representations about the suitability of this software for any purpose.  It
+#  is provided "as is" without express or implied warranty.
+# 
+#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+#  PERFORMANCE OF THIS SOFTWARE.
+#
+
+bin_SCRIPTS = $(top_srcdir)/@ARCH@-common/startx
+
+confdir = @CONF_PREFIX@/etc/X11
+conf_DATA = $(top_srcdir)/@ARCH@-common/xorg.conf	\
+	    $(top_srcdir)/@ARCH@-common/Xresources
+
+
+
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/NEWS
diff --git a/README b/README
new file mode 100644
index 0000000..c10a9c5
--- /dev/null
+++ b/README
@@ -0,0 +1,3 @@
+Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved.
+Except as noted, this software is licensed under MIT License.
+Please, see the LICENSE.MIT file for MIT License terms and conditions.
diff --git a/arm-common/Xmodmap b/arm-common/Xmodmap
new file mode 100644
index 0000000..be42e4b
--- /dev/null
+++ b/arm-common/Xmodmap
@@ -0,0 +1,25 @@
+keycode 123 = XF86AudioRaiseVolume
+keycode 122 = XF86AudioLowerVolume
+keycode 231 = Cancel
+keycode 177 = XF86Send
+keycode 147 = XF86Phone
+keycode 166 = XF86Stop
+keycode 225 = XF86Search
+keycode 124 = XF86PowerOff
+keycode 179 = XF86WebCam
+keycode 220 = XF86Pictures
+keycode 208 = XF86AudioPlay
+keycode 209 = XF86AudioPause
+keycode 174 = XF86AudioStop
+keycode 171 = XF86AudioNext
+keycode 173 = XF86AudioPrev
+keycode 176 = XF86AudioRewind
+keycode 216 = XF86AudioForward
+keycode 234 = XF86AudioMedia
+keycode 153 = 
+keycode 239 = 
+keycode 136 = 
+keycode 140 =
+keycode 182 =
+keycode 172 =
+keycode 215 =
diff --git a/arm-common/Xorg.sh b/arm-common/Xorg.sh
new file mode 100755
index 0000000..b6ff0aa
--- /dev/null
+++ b/arm-common/Xorg.sh
@@ -0,0 +1,3 @@
+export HOME=/root
+export DISPLAY=:0
+export XDG_RUNTIME_DIR=/tmp
diff --git a/arm-common/Xresources b/arm-common/Xresources
new file mode 100644
index 0000000..032fd26
--- /dev/null
+++ b/arm-common/Xresources
@@ -0,0 +1 @@
+Xft.dpi: 72
diff --git a/arm-common/scripts/setcpu b/arm-common/scripts/setcpu
new file mode 100755
index 0000000..99787dc
--- /dev/null
+++ b/arm-common/scripts/setcpu
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+if [ "$1" = "" ]; then
+	echo "Usage> /usr/bin/setcpu <performance | ondemand>"
+	exit 1
+fi
+
+if [ "$1" = "perf" ]; then
+	echo "Setting CPU @ Performance Mode"
+	echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+else
+	if [ "$1" = "performance" ]; then
+		echo "Setting CPU @ Performance Mode"
+		echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+	else
+		if [ "$1" = "ondemand" ]; then
+			echo "Setting CPU @ Ondemand Mode"
+			echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+		else
+			echo "Usage> /usr/bin/setcpu <performance | ondemand>"
+			exit 1
+		fi
+	fi
+fi
diff --git a/arm-common/scripts/setpoll b/arm-common/scripts/setpoll
new file mode 100755
index 0000000..6011698
--- /dev/null
+++ b/arm-common/scripts/setpoll
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ "$1" = "" ]; then
+	echo "Usage> /usr/bin/setpoll < 0 or 1 >"
+	exit 1
+fi
+
+xinput set-prop "Pointer1" --type=int --format=8 "Evdev Use Poll" $1
diff --git a/arm-common/startx.in b/arm-common/startx.in
new file mode 100755
index 0000000..e9c3257
--- /dev/null
+++ b/arm-common/startx.in
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+DISPLAY=":0"
+LOGDIR="/var/log"
+XORG_CONF=" -config /etc/X11/xorg.conf -configdir /etc/X11/xorg.conf.d -nolisten tcp "
+OTHER_OPTIONS=" -quiet -logfile ${LOGDIR}/Xorg.0.log -ac -noreset +accessx 0 +dpmsphone "
+
+if [ -e /usr/bin/opengl-es-setup-mali-env.sh  ]; then
+	/usr/bin/opengl-es-setup-mali-env.sh
+fi
+
+#remove previous Xorg.0.log file
+if [ -e ${LOGDIR}/Xorg.0.log ]; then
+	rm ${LOGDIR}/Xorg.0.log
+fi
+
+#remove previous Xorg.0.log.old file
+if [ -e ${LOGDIR}/Xorg.0.log.old ]; then
+	rm ${LOGDIR}/Xorg.0.log.old
+fi
+
+if [ -e ~/.xinitrc ]; then
+	XINITRC=~/.xinitrc
+else
+	XINITRC=/etc/X11/xinitrc
+fi
+
+XSERVER_OPTIONS=" ${DISPLAY} ${OTHER_OPTIONS} ${XORG_CONF} "
+
+if [ "$1" = "--gdb" ]; then
+	if [ -x /usr/bin/pvrsrvinit ]; then
+		pvrsrvinit start
+	fi
+	gdb --args Xorg ${XSERVER_OPTIONS}
+else
+	if [ "$1" = "--only" ]; then
+		if [ -x /usr/bin/pvrsrvinit ]; then
+			pvrsrvinit start
+		fi
+		export XSERVER_WAIT_MS=100000
+
+		Xorg ${XSERVER_OPTIONS} &
+	else
+		export WMRC=/etc/X11/wmrc
+		export WMUSERID=`id -u app`
+		export WMGROUPID=`id -g app`
+		export WMUSER=app
+		export WMUSERHOME=/opt/home/app
+		export XSERVER_WAIT_MS=100000
+
+		xinit ${XINITRC} -- @PREFIX@/bin/Xorg ${XSERVER_OPTIONS} &
+	fi
+fi
+
diff --git a/arm-common/tizen_layout_mobile.txt b/arm-common/tizen_layout_mobile.txt
new file mode 100644
index 0000000..198796a
--- /dev/null
+++ b/arm-common/tizen_layout_mobile.txt
@@ -0,0 +1,37 @@
+XF86AudioRaiseVolume 115
+XF86AudioLowerVolume 114
+XF86PowerOff 116
+XF86Menu 169
+XF86Home 139
+XF86Back 158
+XF86Camera 171
+XF86Camera_Full 212
+XF86Search 217
+XF86AudioPlay 200
+XF86AudioPause 201
+XF86AudioStop 166
+XF86AudioNext 163
+XF86AudioPrev 165
+XF86AudioRewind 168
+XF86AudioForward 208
+XF86AudioMedia 226
+XF86AudioPlayPause 164
+XF86AudioMute 113
+XF86AudioRecord 167
+Cancel 223 keyboard
+XF86SoftKBD 148
+XF86QuickPanel 183
+XF86TaskPane 184
+XF86HomePage 172
+XF86WWW 150
+XF86Mail 155
+XF86ScreenSaver 152
+XF86MonBrightnessDown 224
+XF86MonBrightnessUp 225
+XF86Voice 149
+Hangul 122 keyboard
+XF86Apps 204
+XF86Call 218
+XF86Game 220
+XF86VoiceWakeUp_LPSD 202
+XF86VoiceWakeUp 203
diff --git a/arm-common/winsys_log_dump.sh b/arm-common/winsys_log_dump.sh
new file mode 100755
index 0000000..0bba40c
--- /dev/null
+++ b/arm-common/winsys_log_dump.sh
@@ -0,0 +1,31 @@
+#!/bin/sh
+
+#--------------------------------------
+#   winsys
+#--------------------------------------
+export DISPLAY=:0.0
+WINSYS_DEBUG=$1/winsys
+E17_HOME=/home/app
+XSERVER_PID=$(ps ax | grep Xorg | grep -e "\s*[0-9]*" -o -m 1 | grep -e "\w[0-9]*" -o)
+mkdir -p ${WINSYS_DEBUG}
+ls -al /proc/$XSERVER_PID/fd/ > ${WINSYS_DEBUG}/proc_fd_list.txt
+xinfo -p 2> ${WINSYS_DEBUG}/ping.log
+xinfo -xwd_topvwins ${WINSYS_DEBUG}
+keygrab_status
+cp -af /opt/var/log/keygrab_status.txt ${WINSYS_DEBUG}
+screenshot bmp ${WINSYS_DEBUG}/slp_screenshot.bmp
+xinfo -topvwins 2> ${WINSYS_DEBUG}/xinfo_topvwins.txt
+xdbg clist > ${WINSYS_DEBUG}/xdbg_clist.log 2>&1
+xdbg drmevent_pending > ${WINSYS_DEBUG}/xdbg_drmevent_pending 2>&1
+find /var/log/ -name "*Xorg*" -exec cp {} ${WINSYS_DEBUG}/ \;
+xprop -root -f _E_LOG 8s -set _E_LOG ${E17_HOME}/e.log
+cat ${E17_HOME}/e.log > ${WINSYS_DEBUG}/e.log
+border_win_info -p ALL -f ${E17_HOME}/e_illume2.log
+cat ${E17_HOME}/e_illume2.log > ${WINSYS_DEBUG}/e_illume2.log
+e_comp_util -l DUMP_INFO -f ${E17_HOME}/e_comp.log
+cat ${E17_HOME}/e_comp.log > ${WINSYS_DEBUG}/e_comp.log
+cat ${E17_HOME}/e_comp.log_move > ${WINSYS_DEBUG}/e_comp.log_move
+rm ${E17_HOME}/e.log
+rm ${E17_HOME}/e_comp.log
+rm ${E17_HOME}/e_comp.log_move
+rm ${E17_HOME}/e_illume2.log
diff --git a/arm-common/xinitrc b/arm-common/xinitrc
new file mode 100755
index 0000000..d361781
--- /dev/null
+++ b/arm-common/xinitrc
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+echo 384000 > /sys/power/gpufreq_min_limit
+
+# set dpi
+if [ -x /usr/bin/xrdb ]; then
+	if [ -e ~/.Xresources ]; then
+		/usr/bin/xrdb -load -nocpp ~/.Xresources
+	else
+		/usr/bin/xrdb -load -nocpp /etc/X11/Xresources
+	fi
+fi
+
diff --git a/arm-common/xorg.conf b/arm-common/xorg.conf
new file mode 100755
index 0000000..53d0b72
--- /dev/null
+++ b/arm-common/xorg.conf
@@ -0,0 +1,6 @@
+Section "ServerFlags"
+	Option "blank time"     "0"
+	Option "standby time"   "0"
+	Option "suspend time"   "0"
+	Option "off time"       "0"
+EndSection
diff --git a/arm-common/xresources b/arm-common/xresources
new file mode 100755
index 0000000..351004b
--- /dev/null
+++ b/arm-common/xresources
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+set -e
+
+case "$1" in
+  start|stop|restart|reload|force-reload)
+  # Setting dpi to 72
+    if [ -x /usr/bin/xrdb ]; then
+      if [ -e ~/.Xresources ]; then
+		/usr/bin/xrdb -load -nocpp ~/.Xresources
+      else
+        /usr/bin/xrdb -load -nocpp /etc/X11/Xresources
+      fi
+    fi
+  ;;
+
+  status)
+    if [ -x /usr/bin/xrdb ]; then
+      /usr/bin/xrdb -query -nocpp
+    fi
+  ;;
+
+  *)
+    echo "Usage: /etc/init.d/xresource {start|stop|status|restart|reload|force-reload}"
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/arm-common/xserver b/arm-common/xserver
new file mode 100755
index 0000000..40f2667
--- /dev/null
+++ b/arm-common/xserver
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+set -e
+
+export DISPLAY=:0
+export PATH=/bin:/usr/bin/:/sbin:/usr/sbin
+
+case "$1" in
+  start)
+    is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+    if [ "${is_running}" = "" ]; then                          
+        echo "Starting Xorg server..."
+        /usr/bin/startx
+    else
+        echo "Xorg server is running already..."
+    fi
+  ;;
+
+  restart|reload|force-reload)
+    is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true                
+    if [ "${is_running}" != "" ]; then                                           
+        $0 stop || true
+        sleep 3
+    fi
+    $0 start || true
+  ;;
+
+  stop)
+    is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+    if [ "${is_running}" != "" ]; then                        
+        echo "Stopping Xorg server..."
+        killall -9 Xorg
+    else
+        echo "Xorg server is not running..."
+    fi
+  ;;
+
+  status)
+    is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+    if [ "${is_running}" = "" ]; then
+        echo "Xorg server is not running..."
+    else
+        echo "Xorg server is running..."
+    fi
+  ;;
+
+  *)
+    echo "Usage: /etc/init.d/xserver {start|stop|status|restart|reload|force-reload}"
+    exit 1
+    ;;
+esac
+
+exit 0
diff --git a/arm-sc7727/xorg.conf.d/display.conf b/arm-sc7727/xorg.conf.d/display.conf
new file mode 100755
index 0000000..28cd6e2
--- /dev/null
+++ b/arm-sc7727/xorg.conf.d/display.conf
@@ -0,0 +1,36 @@
+Section "ServerLayout"
+        Identifier              "TIZEN ULC Mobile Layout"
+        Screen          0       "Screen0" 0 0
+        InputDevice		"Gesture"
+EndSection
+
+Section "Screen"
+        Identifier              "Screen0"
+        Device                  "SEC"
+        Monitor                 "LCD0"
+        SubSection              "Display"
+                Modes           "240x320"
+        EndSubSection
+EndSection
+
+Section "Monitor"
+        Identifier              "LCD0"
+        Option                  "DPMS"  "true"
+        DisplaySize             46 61
+EndSection
+
+Section "Device"
+    Identifier "SEC"
+    Driver     "sec"
+    Option     "fb"            "/dev/fb0"
+    Option     "DRI2"          "true"
+    Option     "PixmapMemtype" "KMEM"
+    Option     "Fastfill"      "false"
+    Option     "PageFlip"      "true"
+    Option     "Compositor"      "true"
+    Option     "Wait4Vsync"    "true"
+    Option     "Wait4VsyncThread"    "true"
+    Option     "DPMSEnable"    "true"
+    Option     "EarlyCommit"   "true"
+EndSection
+
diff --git a/arm-sc7727/xorg.conf.d/input.conf b/arm-sc7727/xorg.conf.d/input.conf
new file mode 100755
index 0000000..f3aa95f
--- /dev/null
+++ b/arm-sc7727/xorg.conf.d/input.conf
@@ -0,0 +1,49 @@
+Section "ServerFlags"
+        Option "AllowEmptyInput" "true"
+        Option "AutoAddDevices" "true"
+        Option "AutoEnableDevices" "true"
+EndSection
+
+Section "InputClass"
+        Identifier "evdev touchscreen catchall"
+        MatchIsTouchScreen "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "evdev"
+        Option "MultiTouch"     "2"
+EndSection
+
+Section "InputClass"
+        Identifier "evdev pointer catchall"
+        MatchIsPointer "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "evdev"
+EndSection
+
+Section "InputClass"
+        Identifier "evdev keyboard catchall"
+        MatchIsKeyboard "on"
+        MatchDevicePath "/dev/input/event*"
+        Driver "evdev"
+EndSection
+
+Section "InputDevice"
+        Identifier "Gesture"
+        Driver  "gesture"
+        Option  "Device"        "/dev/null"
+        Option  "Activate"      "1"
+        Option  "PassKey1"	"121"	#Audio Mute Key
+        Option  "PassKey2"	"122"	#Volume Down Key
+        Option  "PassKey3"	"123"	#Volume Up Key
+        Option  "PassKey4"	"124"	#Power Key
+        Option  "PassKey5"	"171"	#Next Song Key
+        Option  "PassKey6"	"172"	#Audio PlayPause Key
+        Option  "PassKey7"	"173"	#Previous Song Key
+        Option  "PassKey8"	"174"	#Audio Stop Key
+        Option  "PassKey9"	"176"	#Audio Rewind Key
+        Option  "PassKey10"	"208"	#Audio Play Key
+        Option  "PassKey11"	"209"	#Audio Pause Key
+        Option  "PassKey12"	"216"	#Audio Forward Key
+        Option  "PassKey13"	"234"	#Audio Media Key
+        Option  "PassKey14"	"210"	#Voice Wakeup LPSD Key
+        Option  "PassKey15"	"211"	#Voice Wakeup Key
+EndSection
diff --git a/arm-sc7727/xorg.conf.d/module.conf b/arm-sc7727/xorg.conf.d/module.conf
new file mode 100755
index 0000000..189d695
--- /dev/null
+++ b/arm-sc7727/xorg.conf.d/module.conf
@@ -0,0 +1,13 @@
+Section "Module"
+    SubSection  "extra"
+        Option  "capture"   "true"
+        Option  "mdm"       "true"
+        Option  "maxclients"       "128"
+    EndSubSection
+
+    SubSection  "xdbg"
+       Option  "log_path"   "/var/log/Xorg.0.log2"
+       Option  "log_level"  "5"
+       Option  "dlog"  "true"
+    EndSubSection
+EndSection
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..218197d
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,12 @@
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+#$srcdir/configure --enable-maintainer-mode "$@"
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..945ceb9
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,56 @@
+#  Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved 
+# 
+#  Permission to use, copy, modify, distribute, and sell this software and its
+#  documentation for any purpose is hereby granted without fee, provided that
+#  the above copyright notice appear in all copies and that both that
+#  copyright notice and this permission notice appear in supporting
+#  documentation, and that the name of Red Hat not be used in
+#  advertising or publicity pertaining to distribution of the software without
+#  specific, written prior permission.  Red Hat makes no
+#  representations about the suitability of this software for any purpose.  It
+#  is provided "as is" without express or implied warranty.
+# 
+#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+#  PERFORMANCE OF THIS SOFTWARE.
+#
+
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.61)
+AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS)
+
+# Checks for programs.
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+
+AC_CONFIG_SRCDIR([Makefile.am])
+AM_CONFIG_HEADER([config.h])
+AC_CONFIG_AUX_DIR(.)
+
+AM_INIT_AUTOMAKE([dist-bzip2])
+
+AM_MAINTAINER_MODE
+
+# Checks for programs.
+AC_DISABLE_STATIC
+AC_PROG_LIBTOOL
+AC_PROG_CC
+
+AC_ARG_WITH(arch,         AS_HELP_STRING([--with-arch=ARCH], [Architecture (default: arm)]),
+                                [ ARCH="$withval" ],
+                                [ ARCH="arm" ])
+AC_ARG_WITH(conf-prefix,      AS_HELP_STRING([--with-conf-prefix=CONF_PREFIX], [Architecture (default: /opt/etc)]),
+                                [ CONF_PREFIX="$withval" ],
+                                [ CONF_PREFIX="/opt/etc" ])
+
+AC_SUBST(ARCH)
+AC_SUBST(CONF_PREFIX)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/packaging/xorg-x11-misc-sprd.spec b/packaging/xorg-x11-misc-sprd.spec
new file mode 100755
index 0000000..65d8387
--- /dev/null
+++ b/packaging/xorg-x11-misc-sprd.spec
@@ -0,0 +1,94 @@
+#sbs-git:slp/pkgs/xorg/driver/xserver-xorg-misc xserver-xorg-misc 0.0.1 13496ac354ad7f6709f1ef9b880a206a2df41c80
+Name:	xorg-x11-misc-sc7727
+Summary:    X11 X server misc files for SPRD
+Version:    0.0.22
+Release:    1
+ExclusiveArch:  %arm
+Group:      System/X11
+License:    MIT
+Source0:    %{name}-%{version}.tar.gz
+Source1:    xorg.service
+Source2:    xresources.service
+
+Requires:   xserver-xorg-core
+Requires(post):   xkeyboard-config
+
+%if ("%{tizen_target_name}" != "Z130H" && "%{tizen_target_name}" != "Z300H")
+Excludearch: %arm
+%endif
+
+%description
+Description: %{summary}
+
+
+%prep
+%setup -q
+
+
+%build
+{
+for f in `find arm-common/ -name "*.in"`; do
+	cat $f > ${f%.in};
+	sed -i -e "s#@PREFIX@#/usr#g" ${f%.in};
+	sed -i -e "s#@DATADIR@#/opt#g" ${f%.in};
+	chmod a+x ${f%.in};
+done
+}
+
+%reconfigure \
+	--with-arch=arm \
+	--with-conf-prefix=/
+
+make %{?jobs:-j%jobs}
+
+%install
+rm -rf %{buildroot}
+mkdir -p %{buildroot}/usr/share/license
+cp -af COPYING %{buildroot}/usr/share/license/%{name}
+%make_install
+
+rm -rf %{buildroot}/etc/X11/xorg.conf.d*
+mkdir -p %{buildroot}/etc/profile.d/
+mkdir -p %{buildroot}/%{_prefix}/etc/X11/
+mkdir -p %{buildroot}/opt/etc/dump.d/module.d
+mkdir -p %{buildroot}/etc/X11/xorg.conf.d
+
+cp -af arm-common/xinitrc %{buildroot}/etc/X11/
+cp -af arm-common/winsys_log_dump.sh %{buildroot}/opt/etc/dump.d/module.d
+cp -af arm-common/Xorg.sh %{buildroot}/etc/profile.d/
+mkdir -p %{buildroot}%{_libdir}/systemd/system/basic.target.wants
+install -m 0644 %SOURCE1 %{buildroot}%{_libdir}/systemd/system/xorg.service
+ln -s ../xorg.service %{buildroot}%{_libdir}/systemd/system/basic.target.wants/xorg.service
+mkdir -p %{buildroot}%{_libdir}/systemd/system/multi-user.target.wants
+install -m 0644 %SOURCE2 %{buildroot}%{_libdir}/systemd/system/xresources.service
+ln -s ../xresources.service %{buildroot}%{_libdir}/systemd/system/multi-user.target.wants/xresources.service
+
+cp -rvf arm-sc7727/xorg.conf.d %{buildroot}/etc/X11/
+
+mkdir -p %{buildroot}/opt/var/xkb
+cp -rf arm-common/tizen_layout_mobile.txt %{buildroot}/opt/var/xkb/tizen_key_layout_temp.txt
+
+%preun
+rm -rf /etc/X11/xorg.conf.d*
+
+%post
+mkdir -p /opt/var/log
+
+%files
+%manifest xorg-x11-misc-sc7727.manifest
+%defattr(-,root,root,-)
+/usr/share/license/%{name}
+%{_sysconfdir}/profile.d/Xorg.sh
+%attr(-,inhouse,inhouse)
+/etc/X11/Xresources
+/etc/X11/xorg.conf
+/etc/X11/xinitrc
+/etc/X11/xorg.conf.d/
+/etc/X11/xorg.conf.d/*.conf
+/opt/etc/dump.d/module.d/*
+%{_bindir}/startx
+%{_libdir}/systemd/system/xorg.service
+%{_libdir}/systemd/system/basic.target.wants/xorg.service
+%{_libdir}/systemd/system/xresources.service
+%{_libdir}/systemd/system/multi-user.target.wants/xresources.service
+/opt/var/xkb/tizen_key_layout_temp.txt
diff --git a/packaging/xorg.service b/packaging/xorg.service
new file mode 100644
index 0000000..9dce83d
--- /dev/null
+++ b/packaging/xorg.service
@@ -0,0 +1,15 @@
+[Unit]
+Description=xserver
+DefaultDependencies=no
+Requires=tizen-generate-env.service
+After=opt.mount smack.service smack_pre_labeling_priv.service tizen-generate-env.service
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+Nice=-5
+ExecStart=/usr/bin/startx
+EnvironmentFile=-/run/tizen-mobile-env
+
+[Install]
+WantedBy=basic.target
diff --git a/packaging/xresources.service b/packaging/xresources.service
new file mode 100644
index 0000000..6a25f16
--- /dev/null
+++ b/packaging/xresources.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=Xresources
+After=tizen-runtime.target
+Requires=tizen-runtime.target
+ConditionFileIsExecutable=/usr/bin/xrdb
+
+[Service]
+Type=oneshot
+EnvironmentFile=/run/tizen-mobile-env
+ExecStart=/usr/bin/xrdb -load -nocpp /etc/X11/Xresources
+
+[Install]
+WantedBy=multi-user.target
diff --git a/xorg-x11-misc-sc7727.manifest b/xorg-x11-misc-sc7727.manifest
new file mode 100644
index 0000000..0ffb447
--- /dev/null
+++ b/xorg-x11-misc-sc7727.manifest
@@ -0,0 +1,13 @@
+<manifest>
+	<request>
+		<domain name="xorg"/>
+	</request>
+	<assign>
+		<filesystem path="/opt/etc/dump.d/module.d/winsys_log_dump.sh" label="_" exec_label="none" />
+		<filesystem path="/etc/profile.d/Xorg.sh" label="_" exec_label="none" />
+		<filesystem path="/etc/X11/xorg.conf.d/display.conf" label="_" exec_label="none" />
+		<filesystem path="/etc/X11/xorg.conf.d/input.conf" label="_" exec_label="none" />
+		<filesystem path="/etc/X11/xorg.conf.d/module.conf" label="_" exec_label="none" />
+		<filesystem path="/etc/X11/xorg.conf" label="_" exec_label="none" />
+	</assign>
+</manifest>